Snapshot cdeccf6fdd8c2d494ea2867cb37a025bf8879baf

Change-Id: Ia2de32ccb97a9641462c72363b0a8c4288f4f36d

384 files changed, 255201 insertions, 0 deletions

diff --git a/Android.mk b/Android.mk
new file mode 100644
index 0000000..3f42f6a
--- /dev/null
+++ b/Android.mk
@@ -0,0 +1,17 @@
+LOCAL_PATH := $(call my-dir)
+
+# Setup bdroid local make variables for handling configuration
+ifneq ($(BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR),)
+  bdroid_C_INCLUDES := $(BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR)
+  bdroid_CFLAGS := -DHAS_BDROID_BUILDCFG
+else
+  $(warning NO BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR, using only generic configuration)
+  bdroid_C_INCLUDES :=
+  bdroid_CFLAGS := -DHAS_NO_BDROID_BUILDCFG
+endif
+
+include $(call all-subdir-makefiles)
+
+# Cleanup our locals
+bdroid_C_INCLUDES :=
+bdroid_CFLaGS :=
diff --git a/CleanSpec.mk b/CleanSpec.mk
new file mode 100644
index 0000000..b84e1b6
--- /dev/null
+++ b/CleanSpec.mk
@@ -0,0 +1,49 @@
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# If you don't need to do a full clean build but would like to touch
+# a file or delete some intermediate files, add a clean step to the end
+# of the list.  These steps will only be run once, if they haven't been
+# run before.
+#
+# E.g.:
+#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
+#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
+#
+# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
+# files that are missing or have been moved.
+#
+# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
+# Use $(OUT_DIR) to refer to the "out" directory.
+#
+# If you need to re-do something that's already mentioned, just copy
+# the command and add it to the bottom of the list.  E.g., if a change
+# that you made last week required touching a file and a change you
+# made today requires touching the same file, just copy the old
+# touch step and add it to the end of the list.
+#
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
+
+# For example:
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
+#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
+#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
+#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
+
+# ************************************************
+# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
+# ************************************************
diff --git a/audio_a2dp_hw/Android.mk b/audio_a2dp_hw/Android.mk
new file mode 100644
index 0000000..d98e4bb
--- /dev/null
+++ b/audio_a2dp_hw/Android.mk
@@ -0,0 +1,21 @@
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES:= \
+	audio_a2dp_hw.c
+
+LOCAL_C_INCLUDES+= .
+
+LOCAL_SHARED_LIBRARIES := \
+	libcutils
+
+LOCAL_SHARED_LIBRARIES += \
+	libpower
+
+LOCAL_MODULE := audio.a2dp.default
+LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/hw
+
+LOCAL_MODULE_TAGS := optional
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/audio_a2dp_hw/audio_a2dp_hw.c b/audio_a2dp_hw/audio_a2dp_hw.c
new file mode 100644
index 0000000..42e416e
--- /dev/null
+++ b/audio_a2dp_hw/audio_a2dp_hw.c
@@ -0,0 +1,1103 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  Filename:      audio_a2dp_hw.c
+ *
+ *  Description:   Implements hal for bluedroid a2dp audio device
+ *
+ *****************************************************************************/
+
+#include <errno.h>
+#include <pthread.h>
+#include <stdint.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <sys/poll.h>
+#include <sys/errno.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <cutils/str_parms.h>
+#include <cutils/sockets.h>
+
+#include <system/audio.h>
+#include <hardware/audio.h>
+
+#include <hardware/hardware.h>
+#include "audio_a2dp_hw.h"
+
+#define LOG_TAG "audio_a2dp_hw"
+/* #define LOG_NDEBUG 0 */
+#include <cutils/log.h>
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define CTRL_CHAN_RETRY_COUNT 3
+#define USEC_PER_SEC 1000000L
+
+#define CASE_RETURN_STR(const) case const: return #const;
+
+#define FNLOG()             ALOGV("%s", __FUNCTION__);
+#define DEBUG(fmt, ...)     ALOGV("%s: " fmt,__FUNCTION__, ## __VA_ARGS__)
+#define INFO(fmt, ...)      ALOGI("%s: " fmt,__FUNCTION__, ## __VA_ARGS__)
+#define ERROR(fmt, ...)     ALOGE("%s: " fmt,__FUNCTION__, ## __VA_ARGS__)
+
+#define ASSERTC(cond, msg, val) if (!(cond)) {ERROR("### ASSERT : %s line %d %s (%d) ###", __FILE__, __LINE__, msg, val);}
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+typedef enum {
+    AUDIO_A2DP_STATE_STARTING,
+    AUDIO_A2DP_STATE_STARTED,
+    AUDIO_A2DP_STATE_STOPPING,
+    AUDIO_A2DP_STATE_STOPPED,
+    AUDIO_A2DP_STATE_SUSPENDED, /* need explicit set param call to resume (suspend=false) */
+    AUDIO_A2DP_STATE_STANDBY    /* allows write to autoresume */
+} a2dp_state_t;
+
+struct a2dp_stream_out;
+
+struct a2dp_audio_device {
+    struct audio_hw_device device;
+    struct a2dp_stream_out *output;
+};
+
+struct a2dp_config {
+    uint32_t                rate;
+    uint32_t                channel_flags;
+    int                     format;
+};
+
+/* move ctrl_fd outside output stream and keep open until HAL unloaded ? */
+
+struct a2dp_stream_out {
+    struct audio_stream_out stream;
+    pthread_mutex_t         lock;
+    int                     ctrl_fd;
+    int                     audio_fd;
+    size_t                  buffer_sz;
+    a2dp_state_t            state;
+    struct a2dp_config      cfg;
+};
+
+struct a2dp_stream_in {
+    struct audio_stream_in stream;
+};
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+static size_t out_get_buffer_size(const struct audio_stream *stream);
+
+/*****************************************************************************
+**  Externs
+******************************************************************************/
+
+/*****************************************************************************
+**  Functions
+******************************************************************************/
+
+/*****************************************************************************
+**   Miscellaneous helper functions
+******************************************************************************/
+
+static const char* dump_a2dp_ctrl_event(char event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(A2DP_CTRL_CMD_NONE)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_CHECK_READY)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_START)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_STOP)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_SUSPEND)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+/* logs timestamp with microsec precision
+   pprev is optional in case a dedicated diff is required */
+static void ts_log(char *tag, int val, struct timespec *pprev_opt)
+{
+    struct timespec now;
+    static struct timespec prev = {0,0};
+    unsigned long long now_us;
+    unsigned long long diff_us;
+
+    clock_gettime(CLOCK_MONOTONIC, &now);
+
+    now_us = now.tv_sec*USEC_PER_SEC + now.tv_nsec/1000;
+
+    if (pprev_opt)
+    {
+        diff_us = (now.tv_sec - prev.tv_sec) * USEC_PER_SEC + (now.tv_nsec - prev.tv_nsec)/1000;
+        *pprev_opt = now;
+        DEBUG("[%s] ts %08lld, *diff %08lld, val %d", tag, now_us, diff_us, val);
+    }
+    else
+    {
+        diff_us = (now.tv_sec - prev.tv_sec) * USEC_PER_SEC + (now.tv_nsec - prev.tv_nsec)/1000;
+        prev = now;
+        DEBUG("[%s] ts %08lld, diff %08lld, val %d", tag, now_us, diff_us, val);
+    }
+}
+
+static int calc_audiotime(struct a2dp_config cfg, int bytes)
+{
+    int chan_count = popcount(cfg.channel_flags);
+
+    ASSERTC(cfg.format == AUDIO_FORMAT_PCM_16_BIT,
+            "unsupported sample sz", cfg.format);
+
+    return bytes*(1000000/(chan_count*2))/cfg.rate;
+}
+
+/*****************************************************************************
+**
+**   bluedroid stack adaptation
+**
+*****************************************************************************/
+
+static int skt_connect(struct a2dp_stream_out *out, char *path)
+{
+    int ret;
+    int skt_fd;
+    struct sockaddr_un remote;
+    int len;
+
+    INFO("connect to %s (sz %d)", path, out->buffer_sz);
+
+    skt_fd = socket(AF_LOCAL, SOCK_STREAM, 0);
+
+    if(socket_local_client_connect(skt_fd, path,
+            ANDROID_SOCKET_NAMESPACE_ABSTRACT, SOCK_STREAM) < 0)
+    {
+        ERROR("failed to connect (%s)", strerror(errno));
+        close(skt_fd);
+        return -1;
+    }
+
+    len = out->buffer_sz;
+    ret = setsockopt(skt_fd, SOL_SOCKET, SO_SNDBUF, (char*)&len, (int)sizeof(len));
+
+    /* only issue warning if failed */
+    if (ret < 0)
+        ERROR("setsockopt failed (%s)", strerror(errno));
+
+    INFO("connected to stack fd = %d", skt_fd);
+
+    return skt_fd;
+}
+
+static int skt_write(int fd, const void *p, size_t len)
+{
+    int sent;
+    struct pollfd pfd;
+
+    FNLOG();
+
+    pfd.fd = fd;
+    pfd.events = POLLOUT;
+
+    /* poll for 500 ms */
+
+    /* send time out */
+    if (poll(&pfd, 1, 500) == 0)
+        return 0;
+
+    ts_log("skt_write", len, NULL);
+
+    if ((sent = send(fd, p, len, MSG_NOSIGNAL)) == -1)
+    {
+        ERROR("write failed with errno=%d\n", errno);
+        return -1;
+    }
+
+    return sent;
+}
+
+static int skt_disconnect(int fd)
+{
+    INFO("fd %d", fd);
+
+    if (fd != AUDIO_SKT_DISCONNECTED)
+    {
+        shutdown(fd, SHUT_RDWR);
+        close(fd);
+    }
+    return 0;
+}
+
+
+
+/*****************************************************************************
+**
+**  AUDIO CONTROL PATH
+**
+*****************************************************************************/
+
+static int a2dp_command(struct a2dp_stream_out *out, char cmd)
+{
+    char ack;
+
+    DEBUG("A2DP COMMAND %s", dump_a2dp_ctrl_event(cmd));
+
+    /* send command */
+    if (send(out->ctrl_fd, &cmd, 1, MSG_NOSIGNAL) == -1)
+    {
+        ERROR("cmd failed (%s)", strerror(errno));
+        skt_disconnect(out->ctrl_fd);
+        out->ctrl_fd = AUDIO_SKT_DISCONNECTED;
+        return -1;
+    }
+
+    /* wait for ack byte */
+    if (recv(out->ctrl_fd, &ack, 1, MSG_NOSIGNAL) < 0)
+    {
+        ERROR("ack failed (%s)", strerror(errno));
+        skt_disconnect(out->ctrl_fd);
+        out->ctrl_fd = AUDIO_SKT_DISCONNECTED;
+        return -1;
+    }
+
+    DEBUG("A2DP COMMAND %s DONE STATUS %d", dump_a2dp_ctrl_event(cmd), ack);
+
+    if (ack != A2DP_CTRL_ACK_SUCCESS)
+        return -1;
+
+    return 0;
+}
+
+/*****************************************************************************
+**
+** AUDIO DATA PATH
+**
+*****************************************************************************/
+
+static void a2dp_stream_out_init(struct a2dp_stream_out *out)
+{
+    pthread_mutexattr_t lock_attr;
+
+    FNLOG();
+
+    pthread_mutexattr_init(&lock_attr);
+    pthread_mutexattr_settype(&lock_attr, PTHREAD_MUTEX_RECURSIVE);
+    pthread_mutex_init(&out->lock, &lock_attr);
+
+    out->ctrl_fd = AUDIO_SKT_DISCONNECTED;
+    out->audio_fd = AUDIO_SKT_DISCONNECTED;
+    out->state = AUDIO_A2DP_STATE_STOPPED;
+
+    out->cfg.channel_flags = AUDIO_STREAM_DEFAULT_CHANNEL_FLAG;
+    out->cfg.format = AUDIO_STREAM_DEFAULT_FORMAT;
+    out->cfg.rate = AUDIO_STREAM_DEFAULT_RATE;
+
+    /* manages max capacity of socket pipe */
+    out->buffer_sz = AUDIO_STREAM_OUTPUT_BUFFER_SZ;
+}
+
+static int start_audio_datapath(struct a2dp_stream_out *out)
+{
+    int oldstate = out->state;
+
+    INFO("state %d", out->state);
+
+    if (out->ctrl_fd == AUDIO_SKT_DISCONNECTED)
+        return -1;
+
+    out->state = AUDIO_A2DP_STATE_STARTING;
+
+    if (a2dp_command(out, A2DP_CTRL_CMD_START) < 0)
+    {
+        ERROR("audiopath start failed");
+
+        out->state = oldstate;
+        return -1;
+    }
+
+    /* connect socket if not yet connected */
+    if (out->audio_fd == AUDIO_SKT_DISCONNECTED)
+    {
+        out->audio_fd = skt_connect(out, A2DP_DATA_PATH);
+
+        if (out->audio_fd < 0)
+        {
+            out->state = oldstate;
+            return -1;
+        }
+
+        out->state = AUDIO_A2DP_STATE_STARTED;
+    }
+
+    return 0;
+}
+
+
+static int stop_audio_datapath(struct a2dp_stream_out *out)
+{
+    int oldstate = out->state;
+
+    INFO("state %d", out->state);
+
+    if (out->ctrl_fd == AUDIO_SKT_DISCONNECTED)
+         return -1;
+
+    /* prevent any stray output writes from autostarting the stream
+       while stopping audiopath */
+    out->state = AUDIO_A2DP_STATE_STOPPING;
+
+    if (a2dp_command(out, A2DP_CTRL_CMD_STOP) < 0)
+    {
+        ERROR("audiopath stop failed");
+        out->state = oldstate;
+        return -1;
+    }
+
+    out->state = AUDIO_A2DP_STATE_STOPPED;
+
+    /* disconnect audio path */
+    skt_disconnect(out->audio_fd);
+    out->audio_fd = AUDIO_SKT_DISCONNECTED;
+
+    return 0;
+}
+
+static int suspend_audio_datapath(struct a2dp_stream_out *out, bool standby)
+{
+    INFO("state %d", out->state);
+
+    if (out->ctrl_fd == AUDIO_SKT_DISCONNECTED)
+         return -1;
+
+    if (out->state == AUDIO_A2DP_STATE_STOPPING)
+        return -1;
+
+    if (a2dp_command(out, A2DP_CTRL_CMD_SUSPEND) < 0)
+        return -1;
+
+    if (standby)
+        out->state = AUDIO_A2DP_STATE_STANDBY;
+    else
+        out->state = AUDIO_A2DP_STATE_SUSPENDED;
+
+    /* disconnect audio path */
+    skt_disconnect(out->audio_fd);
+
+    out->audio_fd = AUDIO_SKT_DISCONNECTED;
+
+    return 0;
+}
+
+static int check_a2dp_ready(struct a2dp_stream_out *out)
+{
+    INFO("state %d", out->state);
+
+    if (a2dp_command(out, A2DP_CTRL_CMD_CHECK_READY) < 0)
+    {
+        ERROR("check a2dp ready failed");
+        return -1;
+    }
+    return 0;
+}
+
+
+/*****************************************************************************
+**
+**  audio output callbacks
+**
+*****************************************************************************/
+
+static ssize_t out_write(struct audio_stream_out *stream, const void* buffer,
+                         size_t bytes)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    int sent;
+
+    DEBUG("write %d bytes (fd %d)", bytes, out->audio_fd);
+
+    if (out->state == AUDIO_A2DP_STATE_SUSPENDED)
+    {
+        DEBUG("stream suspended");
+        return -1;
+    }
+
+    /* only allow autostarting if we are in stopped or standby */
+    if ((out->state == AUDIO_A2DP_STATE_STOPPED) ||
+        (out->state == AUDIO_A2DP_STATE_STANDBY))
+    {
+        pthread_mutex_lock(&out->lock);
+
+        if (start_audio_datapath(out) < 0)
+        {
+            /* emulate time this write represents to avoid very fast write
+               failures during transition periods or remote suspend */
+
+            int us_delay = calc_audiotime(out->cfg, bytes);
+
+            DEBUG("emulate a2dp write delay (%d us)", us_delay);
+
+            usleep(us_delay);
+            pthread_mutex_unlock(&out->lock);
+            return -1;
+        }
+
+        pthread_mutex_unlock(&out->lock);
+    }
+    else if (out->state != AUDIO_A2DP_STATE_STARTED)
+    {
+        ERROR("stream not in stopped or standby");
+        return -1;
+    }
+
+    sent = skt_write(out->audio_fd, buffer,  bytes);
+
+    if (sent == -1)
+    {
+        skt_disconnect(out->audio_fd);
+        out->audio_fd = AUDIO_SKT_DISCONNECTED;
+        out->state = AUDIO_A2DP_STATE_STOPPED;
+    }
+
+    DEBUG("wrote %d bytes out of %d bytes", sent, bytes);
+    return sent;
+}
+
+
+static uint32_t out_get_sample_rate(const struct audio_stream *stream)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    DEBUG("rate %d", out->cfg.rate);
+
+    return out->cfg.rate;
+}
+
+static int out_set_sample_rate(struct audio_stream *stream, uint32_t rate)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    DEBUG("out_set_sample_rate : %d", rate);
+
+    if (rate != AUDIO_STREAM_DEFAULT_RATE)
+    {
+        ERROR("only rate %d supported", AUDIO_STREAM_DEFAULT_RATE);
+        return -1;
+    }
+
+    out->cfg.rate = rate;
+
+    return 0;
+}
+
+static size_t out_get_buffer_size(const struct audio_stream *stream)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    DEBUG("buffer_size : %d", out->buffer_sz);
+
+    return out->buffer_sz;
+}
+
+static uint32_t out_get_channels(const struct audio_stream *stream)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    DEBUG("channels 0x%x", out->cfg.channel_flags);
+
+    return out->cfg.channel_flags;
+}
+
+static audio_format_t out_get_format(const struct audio_stream *stream)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    DEBUG("format 0x%x", out->cfg.format);
+    return out->cfg.format;
+}
+
+static int out_set_format(struct audio_stream *stream, audio_format_t format)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    DEBUG("setting format not yet supported (0x%x)", format);
+    return -ENOSYS;
+}
+
+static int out_standby(struct audio_stream *stream)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    int retval = 0;
+
+    int retVal = 0;
+
+    FNLOG();
+
+    pthread_mutex_lock(&out->lock);
+
+    if (out->state == AUDIO_A2DP_STATE_STARTED)
+        retVal =  suspend_audio_datapath(out, true);
+    else
+        retVal = 0;
+    pthread_mutex_unlock (&out->lock);
+
+    return retVal;
+}
+
+static int out_dump(const struct audio_stream *stream, int fd)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    FNLOG();
+    return 0;
+}
+
+static int out_set_parameters(struct audio_stream *stream, const char *kvpairs)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+    struct str_parms *parms;
+    char keyval[16];
+    int retval = 0;
+
+    INFO("state %d", out->state);
+
+    pthread_mutex_lock(&out->lock);
+
+    parms = str_parms_create_str(kvpairs);
+
+    /* dump params */
+    str_parms_dump(parms);
+
+    retval = str_parms_get_str(parms, "closing", keyval, sizeof(keyval));
+
+    if (retval >= 0)
+    {
+        if (strcmp(keyval, "true") == 0)
+        {
+            DEBUG("stream closing, disallow any writes");
+            out->state = AUDIO_A2DP_STATE_STOPPING;
+        }
+    }
+
+    retval = str_parms_get_str(parms, "A2dpSuspended", keyval, sizeof(keyval));
+
+    if (retval >= 0)
+    {
+        if (strcmp(keyval, "true") == 0)
+        {
+            if (out->state == AUDIO_A2DP_STATE_STARTED)
+                retval = suspend_audio_datapath(out, false);
+        }
+        else
+        {
+            /* Do not start the streaming automatically. If the phone was streaming
+             * prior to being suspended, the next out_write shall trigger the
+             * AVDTP start procedure */
+            if (out->state == AUDIO_A2DP_STATE_SUSPENDED)
+                out->state = AUDIO_A2DP_STATE_STANDBY;
+            /* Irrespective of the state, return 0 */
+            retval = 0;
+        }
+    }
+
+    pthread_mutex_unlock(&out->lock);
+    str_parms_destroy(parms);
+
+    return retval;
+}
+
+static char * out_get_parameters(const struct audio_stream *stream, const char *keys)
+{
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    FNLOG();
+
+    /* add populating param here */
+
+    return strdup("");
+}
+
+static uint32_t out_get_latency(const struct audio_stream_out *stream)
+{
+    int latency_us;
+
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    FNLOG();
+
+    latency_us = ((out->buffer_sz * 1000 ) /
+                    audio_stream_frame_size(&out->stream.common) /
+                    out->cfg.rate) * 1000;
+
+
+    return (latency_us / 1000) + 200;
+}
+
+static int out_set_volume(struct audio_stream_out *stream, float left,
+                          float right)
+{
+    FNLOG();
+
+    /* volume controlled in audioflinger mixer (digital) */
+
+    return -ENOSYS;
+}
+
+
+
+static int out_get_render_position(const struct audio_stream_out *stream,
+                                   uint32_t *dsp_frames)
+{
+    FNLOG();
+    return -EINVAL;
+}
+
+static int out_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    FNLOG();
+    return 0;
+}
+
+static int out_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    FNLOG();
+    return 0;
+}
+
+/*
+ * AUDIO INPUT STREAM
+ */
+
+static uint32_t in_get_sample_rate(const struct audio_stream *stream)
+{
+    FNLOG();
+    return 8000;
+}
+
+static int in_set_sample_rate(struct audio_stream *stream, uint32_t rate)
+{
+    FNLOG();
+    return 0;
+}
+
+static size_t in_get_buffer_size(const struct audio_stream *stream)
+{
+    FNLOG();
+    return 320;
+}
+
+static uint32_t in_get_channels(const struct audio_stream *stream)
+{
+    FNLOG();
+    return AUDIO_CHANNEL_IN_MONO;
+}
+
+static audio_format_t in_get_format(const struct audio_stream *stream)
+{
+    FNLOG();
+    return AUDIO_FORMAT_PCM_16_BIT;
+}
+
+static int in_set_format(struct audio_stream *stream, audio_format_t format)
+{
+    FNLOG();
+    return 0;
+}
+
+static int in_standby(struct audio_stream *stream)
+{
+    FNLOG();
+    return 0;
+}
+
+static int in_dump(const struct audio_stream *stream, int fd)
+{
+    FNLOG();
+    return 0;
+}
+
+static int in_set_parameters(struct audio_stream *stream, const char *kvpairs)
+{
+    FNLOG();
+    return 0;
+}
+
+static char * in_get_parameters(const struct audio_stream *stream,
+                                const char *keys)
+{
+    FNLOG();
+    return strdup("");
+}
+
+static int in_set_gain(struct audio_stream_in *stream, float gain)
+{
+    FNLOG();
+    return 0;
+}
+
+static ssize_t in_read(struct audio_stream_in *stream, void* buffer,
+                       size_t bytes)
+{
+    FNLOG();
+    return bytes;
+}
+
+static uint32_t in_get_input_frames_lost(struct audio_stream_in *stream)
+{
+    FNLOG();
+    return 0;
+}
+
+static int in_add_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    FNLOG();
+    return 0;
+}
+
+static int in_remove_audio_effect(const struct audio_stream *stream, effect_handle_t effect)
+{
+    FNLOG();
+
+    return 0;
+}
+
+static int adev_open_output_stream(struct audio_hw_device *dev,
+                                   audio_io_handle_t handle,
+                                   audio_devices_t devices,
+                                   audio_output_flags_t flags,
+                                   struct audio_config *config,
+                                   struct audio_stream_out **stream_out)
+
+{
+    struct a2dp_audio_device *a2dp_dev = (struct a2dp_audio_device *)dev;
+    struct a2dp_stream_out *out;
+    int ret = 0;
+    int i;
+
+    INFO("opening output");
+
+    out = (struct a2dp_stream_out *)calloc(1, sizeof(struct a2dp_stream_out));
+
+    if (!out)
+        return -ENOMEM;
+
+    out->stream.common.get_sample_rate = out_get_sample_rate;
+    out->stream.common.set_sample_rate = out_set_sample_rate;
+    out->stream.common.get_buffer_size = out_get_buffer_size;
+    out->stream.common.get_channels = out_get_channels;
+    out->stream.common.get_format = out_get_format;
+    out->stream.common.set_format = out_set_format;
+    out->stream.common.standby = out_standby;
+    out->stream.common.dump = out_dump;
+    out->stream.common.set_parameters = out_set_parameters;
+    out->stream.common.get_parameters = out_get_parameters;
+    out->stream.common.add_audio_effect = out_add_audio_effect;
+    out->stream.common.remove_audio_effect = out_remove_audio_effect;
+    out->stream.get_latency = out_get_latency;
+    out->stream.set_volume = out_set_volume;
+    out->stream.write = out_write;
+    out->stream.get_render_position = out_get_render_position;
+
+    /* initialize a2dp specifics */
+    a2dp_stream_out_init(out);
+
+   /* set output config values */
+   if (config)
+   {
+      config->format = out_get_format((const struct audio_stream *)&out->stream);
+      config->sample_rate = out_get_sample_rate((const struct audio_stream *)&out->stream);
+      config->channel_mask = out_get_channels((const struct audio_stream *)&out->stream);
+   }
+    *stream_out = &out->stream;
+    a2dp_dev->output = out;
+
+    /* retry logic to catch any timing variations on control channel */
+    for (i = 0; i < CTRL_CHAN_RETRY_COUNT; i++)
+    {
+        /* connect control channel if not already connected */
+        if ((out->ctrl_fd = skt_connect(out, A2DP_CTRL_PATH)) > 0)
+        {
+            /* success, now check if stack is ready */
+            if (check_a2dp_ready(out) == 0)
+                break;
+
+            ERROR("error : a2dp not ready, wait 250 ms and retry");
+            usleep(250000);
+            skt_disconnect(out->ctrl_fd);
+        }
+
+        /* ctrl channel not ready, wait a bit */
+        usleep(250000);
+    }
+
+    if (out->ctrl_fd == AUDIO_SKT_DISCONNECTED)
+    {
+        ERROR("ctrl socket failed to connect (%s)", strerror(errno));
+        ret = -1;
+        goto err_open;
+    }
+
+    DEBUG("success");
+    return 0;
+
+err_open:
+    free(out);
+    *stream_out = NULL;
+    ERROR("failed");
+    return ret;
+}
+
+static void adev_close_output_stream(struct audio_hw_device *dev,
+                                     struct audio_stream_out *stream)
+{
+    struct a2dp_audio_device *a2dp_dev = (struct a2dp_audio_device *)dev;
+    struct a2dp_stream_out *out = (struct a2dp_stream_out *)stream;
+
+    INFO("closing output (state %d)", out->state);
+
+    if ((out->state == AUDIO_A2DP_STATE_STARTED) || (out->state == AUDIO_A2DP_STATE_STOPPING))
+        stop_audio_datapath(out);
+
+    skt_disconnect(out->ctrl_fd);
+    free(stream);
+    a2dp_dev->output = NULL;
+
+    DEBUG("done");
+}
+
+static int adev_set_parameters(struct audio_hw_device *dev, const char *kvpairs)
+{
+    struct a2dp_audio_device *a2dp_dev = (struct a2dp_audio_device *)dev;
+    struct a2dp_stream_out *out = a2dp_dev->output;
+    int retval = 0;
+
+    if (out == NULL)
+        return retval;
+
+    INFO("state %d", out->state);
+
+    retval = out->stream.common.set_parameters((struct audio_stream *)out, kvpairs);
+
+    return retval;
+}
+
+static char * adev_get_parameters(const struct audio_hw_device *dev,
+                                  const char *keys)
+{
+    struct str_parms *parms;
+
+    FNLOG();
+
+    parms = str_parms_create_str(keys);
+
+    str_parms_dump(parms);
+
+    str_parms_destroy(parms);
+
+    return strdup("");
+}
+
+static int adev_init_check(const struct audio_hw_device *dev)
+{
+    struct a2dp_audio_device *a2dp_dev = (struct a2dp_audio_device*)dev;
+
+    FNLOG();
+
+    return 0;
+}
+
+static int adev_set_voice_volume(struct audio_hw_device *dev, float volume)
+{
+    FNLOG();
+
+    return -ENOSYS;
+}
+
+static int adev_set_master_volume(struct audio_hw_device *dev, float volume)
+{
+    FNLOG();
+
+    return -ENOSYS;
+}
+
+static int adev_set_mode(struct audio_hw_device *dev, int mode)
+{
+    FNLOG();
+
+    return 0;
+}
+
+static int adev_set_mic_mute(struct audio_hw_device *dev, bool state)
+{
+    FNLOG();
+
+    return -ENOSYS;
+}
+
+static int adev_get_mic_mute(const struct audio_hw_device *dev, bool *state)
+{
+    FNLOG();
+
+    return -ENOSYS;
+}
+
+static size_t adev_get_input_buffer_size(const struct audio_hw_device *dev,
+                                         const struct audio_config *config)
+{
+    FNLOG();
+
+    return 320;
+}
+
+static int adev_open_input_stream(struct audio_hw_device *dev,
+                                  audio_io_handle_t handle,
+                                  audio_devices_t devices,
+                                  struct audio_config *config,
+                                  struct audio_stream_in **stream_in)
+{
+    struct a2dp_audio_device *ladev = (struct a2dp_audio_device *)dev;
+    struct a2dp_stream_in *in;
+    int ret;
+
+    FNLOG();
+
+    in = (struct a2dp_stream_in *)calloc(1, sizeof(struct a2dp_stream_in));
+
+    if (!in)
+        return -ENOMEM;
+
+    in->stream.common.get_sample_rate = in_get_sample_rate;
+    in->stream.common.set_sample_rate = in_set_sample_rate;
+    in->stream.common.get_buffer_size = in_get_buffer_size;
+    in->stream.common.get_channels = in_get_channels;
+    in->stream.common.get_format = in_get_format;
+    in->stream.common.set_format = in_set_format;
+    in->stream.common.standby = in_standby;
+    in->stream.common.dump = in_dump;
+    in->stream.common.set_parameters = in_set_parameters;
+    in->stream.common.get_parameters = in_get_parameters;
+    in->stream.common.add_audio_effect = in_add_audio_effect;
+    in->stream.common.remove_audio_effect = in_remove_audio_effect;
+    in->stream.set_gain = in_set_gain;
+    in->stream.read = in_read;
+    in->stream.get_input_frames_lost = in_get_input_frames_lost;
+
+    *stream_in = &in->stream;
+    return 0;
+
+err_open:
+    free(in);
+    *stream_in = NULL;
+    return ret;
+}
+
+static void adev_close_input_stream(struct audio_hw_device *dev,
+                                   struct audio_stream_in *in)
+{
+    FNLOG();
+
+    return;
+}
+
+static int adev_dump(const audio_hw_device_t *device, int fd)
+{
+    FNLOG();
+
+    return 0;
+}
+
+static int adev_close(hw_device_t *device)
+{
+    FNLOG();
+
+    free(device);
+    return 0;
+}
+
+static int adev_open(const hw_module_t* module, const char* name,
+                     hw_device_t** device)
+{
+    struct a2dp_audio_device *adev;
+    int ret;
+
+    INFO(" adev_open in A2dp_hw module");
+    FNLOG();
+
+    if (strcmp(name, AUDIO_HARDWARE_INTERFACE) != 0)
+    {
+        ERROR("interface %s not matching [%s]", name, AUDIO_HARDWARE_INTERFACE);
+        return -EINVAL;
+    }
+
+    adev = calloc(1, sizeof(struct a2dp_audio_device));
+
+    if (!adev)
+        return -ENOMEM;
+
+    adev->device.common.tag = HARDWARE_DEVICE_TAG;
+    adev->device.common.version = AUDIO_DEVICE_API_VERSION_CURRENT;
+    adev->device.common.module = (struct hw_module_t *) module;
+    adev->device.common.close = adev_close;
+
+    adev->device.init_check = adev_init_check;
+    adev->device.set_voice_volume = adev_set_voice_volume;
+    adev->device.set_master_volume = adev_set_master_volume;
+    adev->device.set_mode = adev_set_mode;
+    adev->device.set_mic_mute = adev_set_mic_mute;
+    adev->device.get_mic_mute = adev_get_mic_mute;
+    adev->device.set_parameters = adev_set_parameters;
+    adev->device.get_parameters = adev_get_parameters;
+    adev->device.get_input_buffer_size = adev_get_input_buffer_size;
+    adev->device.open_output_stream = adev_open_output_stream;
+    adev->device.close_output_stream = adev_close_output_stream;
+    adev->device.open_input_stream = adev_open_input_stream;
+    adev->device.close_input_stream = adev_close_input_stream;
+    adev->device.dump = adev_dump;
+
+    adev->output = NULL;
+
+
+    *device = &adev->device.common;
+
+    return 0;
+}
+
+static struct hw_module_methods_t hal_module_methods = {
+    .open = adev_open,
+};
+
+struct audio_module HAL_MODULE_INFO_SYM = {
+    .common = {
+        .tag = HARDWARE_MODULE_TAG,
+        .version_major = 1,
+        .version_minor = 0,
+        .id = AUDIO_HARDWARE_MODULE_ID,
+        .name = "A2DP Audio HW HAL",
+        .author = "The Android Open Source Project",
+        .methods = &hal_module_methods,
+    },
+};
+
diff --git a/audio_a2dp_hw/audio_a2dp_hw.h b/audio_a2dp_hw/audio_a2dp_hw.h
new file mode 100644
index 0000000..2015591
--- /dev/null
+++ b/audio_a2dp_hw/audio_a2dp_hw.h
@@ -0,0 +1,86 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  Filename:      audio_a2dp_hw.h
+ *
+ *  Description:
+ *
+ *****************************************************************************/
+
+#ifndef AUDIO_A2DP_HW_H
+#define AUDIO_A2DP_HW_H
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define A2DP_AUDIO_HARDWARE_INTERFACE "audio.a2dp"
+#define A2DP_CTRL_PATH "/data/misc/bluedroid/.a2dp_ctrl"
+#define A2DP_DATA_PATH "/data/misc/bluedroid/.a2dp_data"
+
+#define AUDIO_STREAM_DEFAULT_RATE          44100
+#define AUDIO_STREAM_DEFAULT_FORMAT        AUDIO_FORMAT_PCM_16_BIT
+#define AUDIO_STREAM_DEFAULT_CHANNEL_FLAG  AUDIO_CHANNEL_OUT_STEREO
+#define AUDIO_STREAM_OUTPUT_BUFFER_SZ      (20*512)
+#define AUDIO_SKT_DISCONNECTED             (-1)
+
+typedef enum {
+    A2DP_CTRL_CMD_NONE,
+    A2DP_CTRL_CMD_CHECK_READY,
+    A2DP_CTRL_CMD_START,
+    A2DP_CTRL_CMD_STOP,
+    A2DP_CTRL_CMD_SUSPEND
+} tA2DP_CTRL_CMD;
+
+typedef enum {
+    A2DP_CTRL_ACK_SUCCESS,
+    A2DP_CTRL_ACK_FAILURE
+} tA2DP_CTRL_ACK;
+
+
+/*****************************************************************************
+**  Type definitions for callback functions
+******************************************************************************/
+
+/*****************************************************************************
+**  Type definitions and return values
+******************************************************************************/
+
+/*****************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+/*****************************************************************************
+**  Functions
+******************************************************************************/
+
+
+/*****************************************************************************
+**
+** Function
+**
+** Description
+**
+** Returns
+**
+******************************************************************************/
+
+#endif /* A2DP_AUDIO_HW_H */
+
diff --git a/bta/Android.mk b/bta/Android.mk
new file mode 100644
index 0000000..7d1c19e
--- /dev/null
+++ b/bta/Android.mk
@@ -0,0 +1,104 @@
+ifneq ($(TARGET_SIMULATOR),true)
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+ifeq ($(BOARD_HAVE_BLUETOOTH_BCM),true)
+LOCAL_CFLAGS += \
+	-DBOARD_HAVE_BLUETOOTH_BCM
+endif
+LOCAL_CFLAGS += -DBUILDCFG $(bdroid_CFLAGS)
+
+LOCAL_PRELINK_MODULE:=false
+LOCAL_SRC_FILES:= \
+    ./dm/bta_dm_ci.c \
+    ./dm/bta_dm_act.c \
+    ./dm/bta_dm_pm.c \
+    ./dm/bta_dm_main.c \
+    ./dm/bta_dm_cfg.c \
+    ./dm/bta_dm_api.c \
+    ./dm/bta_dm_sco.c \
+    ./gatt/bta_gattc_api.c \
+    ./gatt/bta_gatts_act.c \
+    ./gatt/bta_gatts_main.c \
+    ./gatt/bta_gattc_utils.c \
+    ./gatt/bta_gattc_ci.c \
+    ./gatt/bta_gatts_api.c \
+    ./gatt/bta_gattc_main.c \
+    ./gatt/bta_gattc_act.c \
+    ./gatt/bta_gattc_cache.c \
+    ./gatt/bta_gatts_utils.c \
+    ./ag/bta_ag_sdp.c \
+    ./ag/bta_ag_sco.c \
+    ./ag/bta_ag_cfg.c \
+    ./ag/bta_ag_main.c \
+    ./ag/bta_ag_api.c \
+    ./ag/bta_ag_rfc.c \
+    ./ag/bta_ag_act.c \
+    ./ag/bta_ag_cmd.c \
+    ./ag/bta_ag_ci.c \
+    ./ag/bta_ag_at.c \
+    ./hh/bta_hh_cfg.c \
+    ./hh/bta_hh_act.c \
+    ./hh/bta_hh_api.c \
+    ./hh/bta_hh_utils.c \
+    ./hh/bta_hh_main.c \
+    ./pb/bta_pbs_cfg.c \
+    ./fs/bta_fs_ci.c \
+    ./fs/bta_fs_cfg.c \
+    ./pan/bta_pan_main.c \
+    ./pan/bta_pan_ci.c \
+    ./pan/bta_pan_act.c \
+    ./pan/bta_pan_api.c \
+    ./av/bta_av_act.c \
+    ./av/bta_av_ci.c \
+    ./av/bta_av_api.c \
+    ./av/bta_av_aact.c \
+    ./av/bta_av_main.c \
+    ./av/bta_av_cfg.c \
+    ./av/bta_av_ssm.c \
+    ./av/bta_av_sbc.c \
+    ./ar/bta_ar.c \
+    ./hl/bta_hl_act.c \
+    ./hl/bta_hl_api.c \
+    ./hl/bta_hl_main.c \
+    ./hl/bta_hl_utils.c \
+    ./hl/bta_hl_sdp.c \
+    ./hl/bta_hl_ci.c \
+    ./sys/bta_sys_main.c \
+    ./sys/bta_sys_ci.c \
+    ./sys/bta_sys_conn.c \
+    ./sys/bta_sys_cfg.c \
+    ./sys/ptim.c \
+    ./sys/bd.c \
+    ./sys/utl.c \
+    ./jv/bta_jv_act.c \
+    ./jv/bta_jv_cfg.c \
+    ./jv/bta_jv_main.c \
+    ./jv/bta_jv_api.c
+
+LOCAL_MODULE := libbt-brcm_bta
+LOCAL_MODULE_CLASS := STATIC_LIBRARIES
+LOCAL_MODULE_TAGS := optional
+LOCAL_SHARED_LIBRARIES := libcutils libc
+
+LOCAL_C_INCLUDES+= . \
+                   $(LOCAL_PATH)/include \
+                   $(LOCAL_PATH)/sys \
+                   $(LOCAL_PATH)/dm \
+                   $(LOCAL_PATH)/../gki/common \
+                   $(LOCAL_PATH)/../gki/ulinux \
+                   $(LOCAL_PATH)/../include \
+                   $(LOCAL_PATH)/../stack/include \
+                   $(LOCAL_PATH)/../stack/btm \
+                   $(LOCAL_PATH)/../hcis \
+                   $(LOCAL_PATH)/../hcis/patchram \
+                   $(LOCAL_PATH)/../udrv/include \
+                   $(LOCAL_PATH)/../brcm/include \
+                   $(bdroid_C_INCLUDES) \
+
+
+include $(BUILD_STATIC_LIBRARY)
+
+endif  # TARGET_SIMULATOR != true
diff --git a/bta/ag/bta_ag_act.c b/bta/ag/bta_ag_act.c
new file mode 100644
index 0000000..5f72444
--- /dev/null
+++ b/bta/ag/bta_ag_act.c
@@ -0,0 +1,867 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains action functions for the audio gateway.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_co.h"
+#include "bta_ag_int.h"
+#include "port_api.h"
+#include "utl.h"
+#include <string.h>
+#include "bta_dm_int.h"
+#include "l2c_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* maximum length of data to read from RFCOMM */
+#define BTA_AG_RFC_READ_MAX     512
+
+/* maximum AT command length */
+#define BTA_AG_CMD_MAX          512
+
+const UINT16 bta_ag_uuid[BTA_AG_NUM_IDX] =
+{
+    UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
+    UUID_SERVCLASS_AG_HANDSFREE
+};
+
+const UINT8 bta_ag_sec_id[BTA_AG_NUM_IDX] =
+{
+    BTM_SEC_SERVICE_HEADSET_AG,
+    BTM_SEC_SERVICE_AG_HANDSFREE
+};
+
+const tBTA_SERVICE_ID bta_ag_svc_id[BTA_AG_NUM_IDX] =
+{
+    BTA_HSP_SERVICE_ID,
+    BTA_HFP_SERVICE_ID
+};
+
+const tBTA_SERVICE_MASK bta_ag_svc_mask[BTA_AG_NUM_IDX] =
+{
+    BTA_HSP_SERVICE_MASK,
+    BTA_HFP_SERVICE_MASK
+};
+
+typedef void (*tBTA_AG_ATCMD_CBACK)(tBTA_AG_SCB *p_scb, UINT16 cmd, UINT8 arg_type,
+                                    char *p_arg, INT16 int_arg);
+
+const tBTA_AG_ATCMD_CBACK bta_ag_at_cback_tbl[BTA_AG_NUM_IDX] =
+{
+    bta_ag_at_hsp_cback,
+    bta_ag_at_hfp_cback
+};
+
+/*******************************************************************************
+**
+** Function         bta_ag_cback_open
+**
+** Description      Send open callback event to application.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_cback_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data, tBTA_AG_STATUS status)
+{
+    tBTA_AG_OPEN    open;
+
+    /* call app callback with open event */
+    open.hdr.handle = bta_ag_scb_to_idx(p_scb);
+    open.hdr.app_id = p_scb->app_id;
+    open.status = status;
+    open.service_id = bta_ag_svc_id[p_scb->conn_service];
+    if(p_data)
+    {
+        /* if p_data is provided then we need to pick the bd address from the open api structure */
+        bdcpy(open.bd_addr, p_data->api_open.bd_addr);
+    }
+    else
+    {
+        bdcpy(open.bd_addr, p_scb->peer_addr);
+    }
+
+    (*bta_ag_cb.p_cback)(BTA_AG_OPEN_EVT, (tBTA_AG *) &open);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_register
+**
+** Description      This function initializes values of the AG cb and sets up
+**                  the SDP record for the services.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_register(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_REGISTER reg;
+
+    /* initialize control block */
+    p_scb->reg_services = p_data->api_register.services;
+    p_scb->serv_sec_mask = p_data->api_register.sec_mask;
+    p_scb->features = p_data->api_register.features;
+    p_scb->app_id = p_data->api_register.app_id;
+
+    /* create SDP records */
+    bta_ag_create_records(p_scb, p_data);
+
+    /* start RFCOMM servers */
+    bta_ag_start_servers(p_scb, p_scb->reg_services);
+
+    /* call app callback with register event */
+    reg.hdr.handle = bta_ag_scb_to_idx(p_scb);
+    reg.hdr.app_id = p_scb->app_id;
+    reg.status = BTA_AG_SUCCESS;
+    (*bta_ag_cb.p_cback)(BTA_AG_REGISTER_EVT, (tBTA_AG *) &reg);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_deregister
+**
+** Description      This function removes the sdp records, closes the RFCOMM
+**                  servers, and deallocates the service control block.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_deregister(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* set dealloc */
+    p_scb->dealloc = TRUE;
+
+    /* remove sdp records */
+    bta_ag_del_records(p_scb, p_data);
+
+    /* remove rfcomm servers */
+    bta_ag_close_servers(p_scb, p_scb->reg_services);
+
+    /* dealloc */
+    bta_ag_scb_dealloc(p_scb);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_start_dereg
+**
+** Description      Start a deregister event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_start_dereg(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* set dealloc */
+    p_scb->dealloc = TRUE;
+
+    /* remove sdp records */
+    bta_ag_del_records(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_start_open
+**
+** Description      This starts an AG open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_start_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    BD_ADDR pending_bd_addr;
+
+    /* store parameters */
+    if (p_data)
+    {
+        bdcpy(p_scb->peer_addr, p_data->api_open.bd_addr);
+        p_scb->open_services = p_data->api_open.services;
+        p_scb->cli_sec_mask = p_data->api_open.sec_mask;
+    }
+
+    /* Check if RFCOMM has any incoming connection to avoid collision. */
+    if (PORT_IsOpening (pending_bd_addr))
+    {
+        /* Let the incoming connection goes through.                        */
+        /* Issue collision for this scb for now.                            */
+        /* We will decide what to do when we find incoming connetion later. */
+        bta_ag_collision_cback (0, BTA_ID_AG, 0, p_scb->peer_addr);
+        return;
+    }
+
+    /* close servers */
+    bta_ag_close_servers(p_scb, p_scb->reg_services);
+
+    /* set role */
+    p_scb->role = BTA_AG_INT;
+
+    /* do service search */
+    bta_ag_do_disc(p_scb, p_scb->open_services);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_disc_int_res
+**
+** Description      This function handles a discovery result when initiator.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_disc_int_res(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16 event = BTA_AG_DISC_FAIL_EVT;
+
+    APPL_TRACE_DEBUG1 ("bta_ag_disc_int_res: Status: %d", p_data->disc_result.status);
+
+    /* if found service */
+    if (p_data->disc_result.status == SDP_SUCCESS ||
+        p_data->disc_result.status == SDP_DB_FULL)
+    {
+        /* get attributes */
+        if (bta_ag_sdp_find_attr(p_scb, p_scb->open_services))
+        {
+            /* set connected service */
+            p_scb->conn_service = bta_ag_service_to_idx(p_scb->open_services);
+
+            /* send ourselves sdp ok event */
+            event = BTA_AG_DISC_OK_EVT;
+        }
+    }
+
+    /* free discovery db */
+    bta_ag_free_db(p_scb, p_data);
+
+    /* if service not found check if we should search for other service */
+    if ((event == BTA_AG_DISC_FAIL_EVT) &&
+        (p_data->disc_result.status == SDP_SUCCESS ||
+         p_data->disc_result.status == SDP_DB_FULL ||
+         p_data->disc_result.status == SDP_NO_RECS_MATCH))
+    {
+        if ((p_scb->open_services & BTA_HFP_SERVICE_MASK) &&
+            (p_scb->open_services & BTA_HSP_SERVICE_MASK))
+        {
+            /* search for HSP */
+            p_scb->open_services &= ~BTA_HFP_SERVICE_MASK;
+            bta_ag_do_disc(p_scb, p_scb->open_services);
+        }
+        else if ((p_scb->open_services & BTA_HSP_SERVICE_MASK) &&
+                 (p_scb->hsp_version == HSP_VERSION_1_2))
+        {
+            /* search for UUID_SERVCLASS_HEADSET for HSP 1.0 device */
+            p_scb->hsp_version = HSP_VERSION_1_0;
+            bta_ag_do_disc(p_scb, p_scb->open_services);
+        }
+        else
+        {
+            /* send ourselves sdp ok/fail event */
+            bta_ag_sm_execute(p_scb, event, p_data);
+        }
+    }
+    else
+    {
+        /* send ourselves sdp ok/fail event */
+        bta_ag_sm_execute(p_scb, event, p_data);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_disc_acp_res
+**
+** Description      This function handles a discovery result when acceptor.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_disc_acp_res(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* if found service */
+    if (p_data->disc_result.status == SDP_SUCCESS ||
+        p_data->disc_result.status == SDP_DB_FULL)
+    {
+        /* get attributes */
+        bta_ag_sdp_find_attr(p_scb, bta_ag_svc_mask[p_scb->conn_service]);
+    }
+
+    /* free discovery db */
+    bta_ag_free_db(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_disc_fail
+**
+** Description      This function handles a discovery failure.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_disc_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* reopen registered servers */
+    bta_ag_start_servers(p_scb, p_scb->reg_services);
+
+    /* reinitialize stuff */
+
+    /* call open cback w. failure */
+    bta_ag_cback_open(p_scb, NULL, BTA_AG_FAIL_SDP);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_open_fail
+**
+** Description      open connection failed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_open_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* call open cback w. failure */
+    bta_ag_cback_open(p_scb, p_data, BTA_AG_FAIL_RESOURCES);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_fail
+**
+** Description      RFCOMM connection failed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* reinitialize stuff */
+    p_scb->conn_handle = 0;
+    p_scb->conn_service = 0;
+    p_scb->peer_features = 0;
+#if (BTM_WBS_INCLUDED == TRUE )
+    p_scb->peer_codecs = BTA_AG_CODEC_NONE;
+    p_scb->sco_codec = BTA_AG_CODEC_NONE;
+#endif
+    p_scb->role = 0;
+    p_scb->svc_conn = FALSE;
+    p_scb->hsp_version = HSP_VERSION_1_2;
+
+    /* reopen registered servers */
+    bta_ag_start_servers(p_scb, p_scb->reg_services);
+
+    /* call open cback w. failure */
+    bta_ag_cback_open(p_scb, NULL, BTA_AG_FAIL_RFCOMM);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_close
+**
+** Description      RFCOMM connection closed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_HDR    close;
+    tBTA_SERVICE_MASK services;
+    int i, num_active_conn = 0;
+
+#ifdef  _WIN32_WCE
+    /* The BTE RFCOMM automatically removes the connection when closed, but BTW does not */
+    if (p_scb->conn_handle != 0)
+        RFCOMM_RemoveConnection (p_scb->conn_handle);
+#endif
+
+    /* reinitialize stuff */
+    p_scb->conn_service = 0;
+    p_scb->peer_features = 0;
+#if (BTM_WBS_INCLUDED == TRUE )
+    p_scb->peer_codecs = BTA_AG_CODEC_NONE;
+    p_scb->sco_codec = BTA_AG_CODEC_NONE;
+#endif
+    p_scb->role = 0;
+    p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+    p_scb->svc_conn = FALSE;
+    p_scb->hsp_version = HSP_VERSION_1_2;
+    bta_ag_at_reinit(&p_scb->at_cb);
+
+    /* stop timers */
+    bta_sys_stop_timer(&p_scb->act_timer);
+#if (BTM_WBS_INCLUDED == TRUE)
+    bta_sys_stop_timer(&p_scb->cn_timer);
+#endif
+
+    close.handle = bta_ag_scb_to_idx(p_scb);
+    close.app_id = p_scb->app_id;
+
+    bta_sys_conn_close(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+    /* call close call-out */
+    bta_ag_co_data_close(close.handle);
+
+    /* call close cback */
+    (*bta_ag_cb.p_cback)(BTA_AG_CLOSE_EVT, (tBTA_AG *) &close);
+
+    /* if not deregistering (deallocating) reopen registered servers */
+    if (p_scb->dealloc == FALSE)
+    {
+        /* Clear peer bd_addr so instance can be reused */
+        bdcpy(p_scb->peer_addr, bd_addr_null);
+
+        /* start only unopened server */
+        services = p_scb->reg_services;
+        for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++)
+        {
+            if(p_scb->serv_handle[i])
+                services &= ~((tBTA_SERVICE_MASK)1 << (BTA_HSP_SERVICE_ID + i));
+        }
+        bta_ag_start_servers(p_scb, services);
+
+        p_scb->conn_handle = 0;
+
+        /* Make sure SCO state is BTA_AG_SCO_SHUTDOWN_ST */
+        bta_ag_sco_shutdown(p_scb, NULL);
+
+        /* Check if all the SLCs are down */
+        for (i = 0; i < BTA_AG_NUM_SCB; i++)
+        {
+            if (bta_ag_cb.scb[i].in_use && bta_ag_cb.scb[i].svc_conn)
+                num_active_conn++;
+        }
+
+        if(!num_active_conn)
+        {
+            bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+        }
+
+    }
+    /* else close port and deallocate scb */
+    else
+    {
+        RFCOMM_RemoveServer(p_scb->conn_handle);
+        bta_ag_scb_dealloc(p_scb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_open
+**
+** Description      Handle RFCOMM channel open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* initialize AT feature variables */
+    p_scb->clip_enabled = FALSE;
+    p_scb->ccwa_enabled = FALSE;
+    p_scb->cmer_enabled = FALSE;
+    p_scb->cmee_enabled = FALSE;
+    p_scb->inband_enabled = ((p_scb->features & BTA_AG_FEAT_INBAND) == BTA_AG_FEAT_INBAND);
+
+    /* set up AT command interpreter */
+    p_scb->at_cb.p_at_tbl = (tBTA_AG_AT_CMD *) bta_ag_at_tbl[p_scb->conn_service];
+    p_scb->at_cb.p_cmd_cback = (tBTA_AG_AT_CMD_CBACK *) bta_ag_at_cback_tbl[p_scb->conn_service];
+    p_scb->at_cb.p_err_cback = (tBTA_AG_AT_ERR_CBACK *) bta_ag_at_err_cback;
+    p_scb->at_cb.p_user = p_scb;
+    p_scb->at_cb.cmd_max_len = BTA_AG_CMD_MAX;
+    bta_ag_at_init(&p_scb->at_cb);
+
+    /* call app open call-out */
+    bta_ag_co_data_open(bta_ag_scb_to_idx(p_scb), bta_ag_svc_id[p_scb->conn_service]);
+
+    bta_sys_conn_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+    bta_ag_cback_open(p_scb, NULL, BTA_AG_SUCCESS);
+
+    if (p_scb->conn_service == BTA_AG_HFP)
+    {
+        /* if hfp start timer for service level conn */
+        bta_sys_start_timer(&p_scb->act_timer, BTA_AG_SVC_TOUT_EVT, p_bta_ag_cfg->conn_tout);
+    }
+    else
+    {
+        /* else service level conn is open */
+        bta_ag_svc_conn_open(p_scb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_acp_open
+**
+** Description      Handle RFCOMM channel open when accepting connection.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_acp_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16          lcid;
+    int             i;
+    tBTA_AG_SCB     *ag_scb, *other_scb;
+    BD_ADDR         dev_addr;
+    int             status;
+
+    /* set role */
+    p_scb->role = BTA_AG_ACP;
+
+    APPL_TRACE_DEBUG2 ("bta_ag_rfc_acp_open: serv_handle0 = %d serv_handle1 = %d",
+                       p_scb->serv_handle[0], p_scb->serv_handle[1]);
+
+    /* get bd addr of peer */
+    if (PORT_SUCCESS != (status=PORT_CheckConnection(p_data->rfc.port_handle, dev_addr, &lcid)))
+    {
+        APPL_TRACE_DEBUG1 ("bta_ag_rfc_acp_open error PORT_CheckConnection returned status %d", status);
+    }
+
+    /* Collision Handling */
+    for (i = 0, ag_scb = &bta_ag_cb.scb[0]; i < BTA_AG_NUM_SCB; i++, ag_scb++)
+    {
+        if ((ag_scb->in_use) && (ag_scb->colli_tmr_on))
+        {
+            /* stop collision timer */
+            ag_scb->colli_tmr_on = FALSE;
+            bta_sys_stop_timer (&ag_scb->colli_timer);
+
+            if (bdcmp (dev_addr, ag_scb->peer_addr) == 0)
+            {
+                /* If incoming and outgoing device are same, nothing more to do.            */
+                /* Outgoing conn will be aborted because we have successful incoming conn.  */
+            }
+            else
+            {
+                /* Resume outgoing connection. */
+                other_scb = bta_ag_get_other_idle_scb (p_scb);
+                if (other_scb)
+                {
+                    bdcpy(other_scb->peer_addr, ag_scb->peer_addr);
+                    other_scb->open_services = ag_scb->open_services;
+                    other_scb->cli_sec_mask = ag_scb->cli_sec_mask;
+
+                    bta_ag_resume_open (other_scb);
+                }
+            }
+
+            break;
+        }
+    }
+
+    bdcpy (p_scb->peer_addr, dev_addr);
+
+    /* determine connected service from port handle */
+    for (i = 0; i < BTA_AG_NUM_IDX; i++)
+    {
+        APPL_TRACE_DEBUG3 ("bta_ag_rfc_acp_open: i = %d serv_handle = %d port_handle = %d",
+                           i, p_scb->serv_handle[i], p_data->rfc.port_handle);
+
+        if (p_scb->serv_handle[i] == p_data->rfc.port_handle)
+        {
+            p_scb->conn_service = i;
+            p_scb->conn_handle = p_data->rfc.port_handle;
+            break;
+        }
+    }
+
+    APPL_TRACE_DEBUG2 ("bta_ag_rfc_acp_open: conn_service = %d conn_handle = %d",
+                       p_scb->conn_service, p_scb->conn_handle);
+
+    /* close any unopened server */
+    bta_ag_close_servers(p_scb, (p_scb->reg_services & ~bta_ag_svc_mask[p_scb->conn_service]));
+
+    /* do service discovery to get features */
+    bta_ag_do_disc(p_scb, bta_ag_svc_mask[p_scb->conn_service]);
+
+    /* continue with common open processing */
+    bta_ag_rfc_open(p_scb, p_data);
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_data
+**
+** Description      Read and process data from RFCOMM.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16  len;
+    char    buf[BTA_AG_RFC_READ_MAX];
+
+    memset(buf, 0, BTA_AG_RFC_READ_MAX);
+
+    /* do the following */
+    for(;;)
+    {
+        /* read data from rfcomm; if bad status, we're done */
+        if (PORT_ReadData(p_scb->conn_handle, buf, BTA_AG_RFC_READ_MAX, &len) != PORT_SUCCESS)
+        {
+            break;
+        }
+
+        /* if no data, we're done */
+        if (len == 0)
+        {
+            break;
+        }
+
+        /* run AT command interpreter on data */
+        bta_ag_at_parse(&p_scb->at_cb, buf, len);
+
+        /* no more data to read, we're done */
+        if (len < BTA_AG_RFC_READ_MAX)
+        {
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_start_close
+**
+** Description      Start the process of closing SCO and RFCOMM connection.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_start_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* Take the link out of sniff and set L2C idle time to 0 */
+    bta_dm_pm_active(p_scb->peer_addr);
+    L2CA_SetIdleTimeoutByBdAddr(p_scb->peer_addr, 0);
+
+    /* if SCO is open close SCO and wait on RFCOMM close */
+    if (bta_ag_sco_is_open(p_scb))
+    {
+        p_scb->post_sco = BTA_AG_POST_SCO_CLOSE_RFC;
+    }
+    else
+    {
+        p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+        bta_ag_rfc_do_close(p_scb, p_data);
+    }
+
+    /* always do SCO shutdown to handle all SCO corner cases */
+    bta_ag_sco_shutdown(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_post_sco_open
+**
+** Description      Perform post-SCO open action, if any
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_post_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    switch (p_scb->post_sco)
+    {
+        case BTA_AG_POST_SCO_RING:
+            bta_ag_send_ring(p_scb, p_data);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        case BTA_AG_POST_SCO_CALL_CONN:
+            bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_CONN_RES);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        default:
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_post_sco_close
+**
+** Description      Perform post-SCO close action, if any
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_post_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    switch (p_scb->post_sco)
+    {
+        case BTA_AG_POST_SCO_CLOSE_RFC:
+            bta_ag_rfc_do_close(p_scb, p_data);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        case BTA_AG_POST_SCO_CALL_CONN:
+            bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_CONN_RES);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        case BTA_AG_POST_SCO_CALL_ORIG:
+            bta_ag_send_call_inds(p_scb, BTA_AG_OUT_CALL_ORIG_RES);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        case BTA_AG_POST_SCO_CALL_END:
+            bta_ag_send_call_inds(p_scb, BTA_AG_END_CALL_RES);
+            p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+            break;
+
+        case BTA_AG_POST_SCO_CALL_END_INCALL:
+            bta_ag_send_call_inds(p_scb, BTA_AG_END_CALL_RES);
+
+            /* Sending callsetup IND and Ring were defered to after SCO close. */
+            bta_ag_send_call_inds(p_scb, BTA_AG_IN_CALL_RES);
+
+            if (bta_ag_inband_enabled(p_scb) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_RING;
+                bta_ag_sco_open(p_scb, p_data);
+            }
+            else
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+                bta_ag_send_ring(p_scb, p_data);
+            }
+            break;
+
+        default:
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_svc_conn_open
+**
+** Description      Service level connection opened
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_svc_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_CONN evt;
+
+    if (!p_scb->svc_conn)
+    {
+        /* set state variable */
+        p_scb->svc_conn = TRUE;
+
+        /* Clear AT+BIA mask from previous SLC if any. */
+        p_scb->bia_masked_out = 0;
+
+        /* stop timer */
+        bta_sys_stop_timer(&p_scb->act_timer);
+
+        /* call callback */
+        evt.hdr.handle = bta_ag_scb_to_idx(p_scb);
+        evt.hdr.app_id = p_scb->app_id;
+        evt.peer_feat = p_scb->peer_features;
+#if (BTM_WBS_INCLUDED == TRUE )
+        evt.peer_codec  = p_scb->peer_codecs;
+#endif
+
+        if ((p_scb->call_ind != BTA_AG_CALL_INACTIVE) ||
+            (p_scb->callsetup_ind != BTA_AG_CALLSETUP_NONE))
+        {
+            bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+        }
+
+        (*bta_ag_cb.p_cback)(BTA_AG_CONN_EVT, (tBTA_AG *) &evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_ci_rx_data
+**
+** Description      Send result code
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_ci_rx_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16 len;
+    tBTA_AG_CI_RX_WRITE *p_rx_write_msg = (tBTA_AG_CI_RX_WRITE *)p_data;
+    char *p_data_area = (char *)(p_rx_write_msg+1);     /* Point to data area after header */
+
+    /* send to RFCOMM */
+    PORT_WriteData(p_scb->conn_handle, p_data_area, strlen(p_data_area), &len);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rcvd_slc_ready
+**
+** Description      Handles SLC ready call-in in case of pass-through mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rcvd_slc_ready(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    APPL_TRACE_DEBUG1("bta_ag_rcvd_slc_ready: handle = %d", bta_ag_scb_to_idx(p_scb));
+
+    if (bta_ag_cb.parse_mode == BTA_AG_PASS_THROUGH)
+    {
+        /* In pass-through mode, BTA knows that SLC is ready only through call-in. */
+        bta_ag_svc_conn_open(p_scb, NULL);
+    }
+}
+
diff --git a/bta/ag/bta_ag_api.c b/bta/ag/bta_ag_api.c
new file mode 100644
index 0000000..07dceb9
--- /dev/null
+++ b/bta/ag/bta_ag_api.c
@@ -0,0 +1,323 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for the audio gateway (AG)
+ *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_int.h"
+#include "gki.h"
+#include <string.h>
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_ag_reg =
+{
+    bta_ag_hdl_event,
+    BTA_AgDisable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_AgEnable
+**
+** Description      Enable the audio gateway service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_AG_ENABLE_EVT. This function must
+**                  be called before other function in the AG API are
+**                  called.
+**
+** Returns          BTA_SUCCESS if OK, BTA_FAILURE otherwise.
+**
+*******************************************************************************/
+tBTA_STATUS BTA_AgEnable(tBTA_AG_PARSE_MODE parse_mode, tBTA_AG_CBACK *p_cback)
+{
+    tBTA_AG_API_ENABLE  *p_buf;
+    UINT8       idx;
+
+    /* Error if AG is already enabled, or AG is in the middle of disabling. */
+    for (idx = 0; idx < BTA_AG_NUM_SCB; idx++)
+    {
+        if (bta_ag_cb.scb[idx].in_use)
+        {
+            APPL_TRACE_ERROR0 ("BTA_AgEnable: FAILED, AG already enabled.");
+            return BTA_FAILURE;
+        }
+    }
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_AG, &bta_ag_reg);
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_AG_API_ENABLE *) GKI_getbuf(sizeof(tBTA_AG_API_ENABLE))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_API_ENABLE_EVT;
+        p_buf->parse_mode = parse_mode;
+        p_buf->p_cback = p_cback;
+        bta_sys_sendmsg(p_buf);
+    }
+
+    return BTA_SUCCESS;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgDisable
+**
+** Description      Disable the audio gateway service
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AG_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgRegister
+**
+** Description      Register an Audio Gateway service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgRegister(tBTA_SERVICE_MASK services, tBTA_SEC sec_mask,tBTA_AG_FEAT features,
+                  char * p_service_names[], UINT8 app_id)
+{
+    tBTA_AG_API_REGISTER    *p_buf;
+    int                     i;
+
+    if ((p_buf = (tBTA_AG_API_REGISTER *) GKI_getbuf(sizeof(tBTA_AG_API_REGISTER))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_API_REGISTER_EVT;
+        p_buf->features = features;
+        p_buf->sec_mask = sec_mask;
+        p_buf->services = services;
+        p_buf->app_id = app_id;
+        for (i = 0; i < BTA_AG_NUM_IDX; i++)
+        {
+            if(p_service_names[i])
+            {
+                BCM_STRNCPY_S(p_buf->p_name[i], BTA_SERVICE_NAME_LEN+1, p_service_names[i], BTA_SERVICE_NAME_LEN);
+                p_buf->p_name[i][BTA_SERVICE_NAME_LEN] = 0;
+            }
+            else
+            {
+                p_buf->p_name[i][0] = 0;
+            }
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgDeregister
+**
+** Description      Deregister an audio gateway service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgDeregister(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AG_API_DEREGISTER_EVT;
+        p_buf->layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgOpen
+**
+** Description      Opens a connection to a headset or hands-free device.
+**                  When connection is open callback function is called
+**                  with a BTA_AG_OPEN_EVT. Only the data connection is
+**                  opened. The audio connection is not opened.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgOpen(UINT16 handle, BD_ADDR bd_addr, tBTA_SEC sec_mask, tBTA_SERVICE_MASK services)
+{
+    tBTA_AG_API_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_AG_API_OPEN *) GKI_getbuf(sizeof(tBTA_AG_API_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_API_OPEN_EVT;
+        p_buf->hdr.layer_specific = handle;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        p_buf->services = services;
+        p_buf->sec_mask = sec_mask;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgClose
+**
+** Description      Close the current connection to a headset or a handsfree
+**                  Any current audio connection will also be closed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgClose(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AG_API_CLOSE_EVT;
+        p_buf->layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgAudioOpen
+**
+** Description      Opens an audio connection to the currently connected
+**                  headset or hnadsfree.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgAudioOpen(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AG_API_AUDIO_OPEN_EVT;
+        p_buf->layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgAudioClose
+**
+** Description      Close the currently active audio connection to a headset
+**                  or hnadsfree. The data connection remains open
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgAudioClose(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AG_API_AUDIO_CLOSE_EVT;
+        p_buf->layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_AgResult
+**
+** Description      Send an AT result code to a headset or hands-free device.
+**                  This function is only used when the AG parse mode is set
+**                  to BTA_AG_PARSE.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgResult(UINT16 handle, tBTA_AG_RES result, tBTA_AG_RES_DATA *p_data)
+{
+    tBTA_AG_API_RESULT  *p_buf;
+
+    if ((p_buf = (tBTA_AG_API_RESULT *) GKI_getbuf(sizeof(tBTA_AG_API_RESULT))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_API_RESULT_EVT;
+        p_buf->hdr.layer_specific = handle;
+        p_buf->result = result;
+        if(p_data)
+        {
+            memcpy(&p_buf->data, p_data, sizeof(p_buf->data));
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AgSetCodec
+**
+** Description      Specify the codec type to be used for the subsequent
+**                  audio connection.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AgSetCodec(UINT16 handle, tBTA_AG_PEER_CODEC codec)
+{
+    tBTA_AG_API_SETCODEC    *p_buf;
+
+    if ((p_buf = (tBTA_AG_API_SETCODEC *) GKI_getbuf(sizeof(tBTA_AG_API_SETCODEC))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_API_SETCODEC_EVT;
+        p_buf->hdr.layer_specific = handle;
+        p_buf->codec = codec;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
diff --git a/bta/ag/bta_ag_at.c b/bta/ag/bta_ag_at.c
new file mode 100644
index 0000000..74d3948
--- /dev/null
+++ b/bta/ag/bta_ag_at.c
@@ -0,0 +1,243 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  BTA AG AT command interpreter.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "gki.h"
+#include "bta_ag_at.h"
+#include "utl.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/******************************************************************************
+**
+** Function         bta_ag_at_init
+**
+** Description      Initialize the AT command parser control block.
+**
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_at_init(tBTA_AG_AT_CB *p_cb)
+{
+    p_cb->p_cmd_buf = NULL;
+    p_cb->cmd_pos = 0;
+}
+
+/******************************************************************************
+**
+** Function         bta_ag_at_reinit
+**
+** Description      Re-initialize the AT command parser control block.  This
+**                  function resets the AT command parser state and frees
+**                  any GKI buffer.
+**
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_at_reinit(tBTA_AG_AT_CB *p_cb)
+{
+    if (p_cb->p_cmd_buf != NULL)
+    {
+        GKI_freebuf(p_cb->p_cmd_buf);
+        p_cb->p_cmd_buf = NULL;
+    }
+    p_cb->cmd_pos = 0;
+}
+/******************************************************************************
+**
+** Function         bta_ag_process_at
+**
+** Description      Parse AT commands.  This function will take the input
+**                  character string and parse it for AT commands according to
+**                  the AT command table passed in the control block.
+**
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_process_at(tBTA_AG_AT_CB *p_cb)
+{
+    UINT16      idx;
+    UINT8       arg_type;
+    char        *p_arg;
+    INT16       int_arg = 0;
+    /* loop through at command table looking for match */
+    for (idx = 0; p_cb->p_at_tbl[idx].p_cmd[0] != 0; idx++)
+    {
+        if (!utl_strucmp(p_cb->p_at_tbl[idx].p_cmd, p_cb->p_cmd_buf))
+        {
+            break;
+        }
+    }
+
+    /* if there is a match; verify argument type */
+    if (p_cb->p_at_tbl[idx].p_cmd[0] != 0)
+    {
+        /* start of argument is p + strlen matching command */
+        p_arg = p_cb->p_cmd_buf + strlen(p_cb->p_at_tbl[idx].p_cmd);
+
+        /* if no argument */
+        if (p_arg[0] == 0)
+        {
+            arg_type = BTA_AG_AT_NONE;
+        }
+        /* else if arg is '?' and it is last character */
+        else if (p_arg[0] == '?' && p_arg[1] == 0)
+        {
+            /* we have a read */
+            arg_type = BTA_AG_AT_READ;
+        }
+        /* else if arg is '=' */
+        else if (p_arg[0] == '=' && p_arg[1] != 0)
+        {
+            if (p_arg[1] == '?' && p_arg[2] == 0)
+            {
+                /* we have a test */
+                arg_type = BTA_AG_AT_TEST;
+            }
+            else
+            {
+                /* we have a set */
+                arg_type = BTA_AG_AT_SET;
+
+                /* skip past '=' */
+                p_arg++;
+            }
+        }
+        else
+        /* else it is freeform argument */
+        {
+            arg_type = BTA_AG_AT_FREE;
+        }
+
+        /* if arguments match command capabilities */
+        if ((arg_type & p_cb->p_at_tbl[idx].arg_type) != 0)
+        {
+            /* if it's a set integer check max, min range */
+            if (arg_type == BTA_AG_AT_SET &&
+                p_cb->p_at_tbl[idx].fmt == BTA_AG_AT_INT)
+            {
+                int_arg = utl_str2int(p_arg);
+                if (int_arg < (INT16) p_cb->p_at_tbl[idx].min ||
+                    int_arg > (INT16) p_cb->p_at_tbl[idx].max)
+                {
+                    /* arg out of range; error */
+                    (*p_cb->p_err_cback)(p_cb->p_user, FALSE, NULL);
+                }
+                else
+                {
+
+                    (*p_cb->p_cmd_cback)(p_cb->p_user, idx, arg_type, p_arg, int_arg);
+                }
+            }
+            else
+            {
+                (*p_cb->p_cmd_cback)(p_cb->p_user, idx, arg_type, p_arg, int_arg);
+            }
+        }
+        /* else error */
+        else
+        {
+            (*p_cb->p_err_cback)(p_cb->p_user, FALSE, NULL);
+        }
+    }
+    /* else no match call error callback */
+    else
+    {
+        (*p_cb->p_err_cback)(p_cb->p_user, TRUE, p_cb->p_cmd_buf);
+    }
+}
+
+/******************************************************************************
+**
+** Function         bta_ag_at_parse
+**
+** Description      Parse AT commands.  This function will take the input
+**                  character string and parse it for AT commands according to
+**                  the AT command table passed in the control block.
+**
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_at_parse(tBTA_AG_AT_CB *p_cb, char *p_buf, UINT16 len)
+{
+    int i = 0;
+    char* p_save;
+
+    if (p_cb->p_cmd_buf == NULL)
+    {
+        p_cb->p_cmd_buf = (char *) GKI_getbuf(p_cb->cmd_max_len);
+        p_cb->cmd_pos = 0;
+    }
+
+    for (i = 0; i < len;)
+    {
+        while (p_cb->cmd_pos < p_cb->cmd_max_len-1 && i < len)
+        {
+            /* Skip null characters between AT commands. */
+            if ((p_cb->cmd_pos == 0) && (p_buf[i] == 0))
+            {
+                i++;
+                continue;
+            }
+
+            p_cb->p_cmd_buf[p_cb->cmd_pos] = p_buf[i++];
+            if ( p_cb->p_cmd_buf[p_cb->cmd_pos] == '\r' || p_cb->p_cmd_buf[p_cb->cmd_pos] == '\n')
+            {
+                p_cb->p_cmd_buf[p_cb->cmd_pos] = 0;
+                if ((p_cb->cmd_pos > 2)                                      &&
+                    (p_cb->p_cmd_buf[0] == 'A' || p_cb->p_cmd_buf[0] == 'a') &&
+                    (p_cb->p_cmd_buf[1] == 'T' || p_cb->p_cmd_buf[1] == 't'))
+                {
+                    p_save = p_cb->p_cmd_buf;
+                    p_cb->p_cmd_buf += 2;
+                    bta_ag_process_at(p_cb);
+                    p_cb->p_cmd_buf = p_save;
+                }
+
+                p_cb->cmd_pos = 0;
+
+            }
+            else if( p_cb->p_cmd_buf[p_cb->cmd_pos] == 0x1A || p_cb->p_cmd_buf[p_cb->cmd_pos] == 0x1B )
+            {
+                p_cb->p_cmd_buf[++p_cb->cmd_pos] = 0;
+                (*p_cb->p_err_cback)(p_cb->p_user, TRUE, p_cb->p_cmd_buf);
+                p_cb->cmd_pos = 0;
+            }
+            else
+            {
+                ++p_cb->cmd_pos;
+            }
+        }
+
+        if (i < len)
+            p_cb->cmd_pos = 0;
+    }
+}
+
diff --git a/bta/ag/bta_ag_at.h b/bta/ag/bta_ag_at.h
new file mode 100644
index 0000000..90d7b0f
--- /dev/null
+++ b/bta/ag/bta_ag_at.h
@@ -0,0 +1,121 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Interface file for BTA AG AT command interpreter.
+ *
+ ******************************************************************************/
+#ifndef BTA_AG_AT_H
+#define BTA_AG_AT_H
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* AT command argument capabilities */
+#define BTA_AG_AT_NONE          0x01        /* no argument */
+#define BTA_AG_AT_SET           0x02        /* set value */
+#define BTA_AG_AT_READ          0x04        /* read value */
+#define BTA_AG_AT_TEST          0x08        /* test value range */
+#define BTA_AG_AT_FREE          0x10        /* freeform argument */
+
+/* AT command argument format */
+#define BTA_AG_AT_STR           0           /* string */
+#define BTA_AG_AT_INT           1           /* integer */
+
+/*****************************************************************************
+**  Data types
+*****************************************************************************/
+
+/* AT command table element */
+typedef struct
+{
+    const char  *p_cmd;         /* AT command string */
+    UINT8       arg_type;       /* allowable argument type syntax */
+    UINT8       fmt;            /* whether arg is int or string */
+    UINT8       min;            /* minimum value for int arg */
+    INT16       max;            /* maximum value for int arg */
+} tBTA_AG_AT_CMD;
+
+/* callback function executed when command is parsed */
+typedef void (tBTA_AG_AT_CMD_CBACK)(void *p_user, UINT16 cmd, UINT8 arg_type,
+                                    char *p_arg, INT16 int_arg);
+
+/* callback function executed to send "ERROR" result code */
+typedef void (tBTA_AG_AT_ERR_CBACK)(void *p_user, BOOLEAN unknown, char *p_arg);
+
+/* AT command parsing control block */
+typedef struct
+{
+    tBTA_AG_AT_CMD          *p_at_tbl;      /* AT command table */
+    tBTA_AG_AT_CMD_CBACK    *p_cmd_cback;   /* command callback */
+    tBTA_AG_AT_ERR_CBACK    *p_err_cback;   /* error callback */
+    void                    *p_user;        /* user-defined data */
+    char                    *p_cmd_buf;     /* temp parsing buffer */
+    UINT16                  cmd_pos;        /* position in temp buffer */
+    UINT16                  cmd_max_len;    /* length of temp buffer to allocate */
+    UINT8                   state;          /* parsing state */
+} tBTA_AG_AT_CB;
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+
+/*****************************************************************************
+**
+** Function         bta_ag_at_init
+**
+** Description      Initialize the AT command parser control block.
+**
+**
+** Returns          void
+**
+*****************************************************************************/
+extern void bta_ag_at_init(tBTA_AG_AT_CB *p_cb);
+
+/*****************************************************************************
+**
+** Function         bta_ag_at_reinit
+**
+** Description      Re-initialize the AT command parser control block.  This
+**                  function resets the AT command parser state and frees
+**                  any GKI buffer.
+**
+**
+** Returns          void
+**
+*****************************************************************************/
+extern void bta_ag_at_reinit(tBTA_AG_AT_CB *p_cb);
+
+/*****************************************************************************
+**
+** Function         bta_ag_at_parse
+**
+** Description      Parse AT commands.  This function will take the input
+**                  character string and parse it for AT commands according to
+**                  the AT command table passed in the control block.
+**
+**
+** Returns          void
+**
+*****************************************************************************/
+extern void bta_ag_at_parse(tBTA_AG_AT_CB *p_cb, char *p_buf, UINT16 len);
+
+#endif /* BTA_AG_AT_H */
+
diff --git a/bta/ag/bta_ag_cfg.c b/bta/ag/bta_ag_cfg.c
new file mode 100644
index 0000000..e02f9f6
--- /dev/null
+++ b/bta/ag/bta_ag_cfg.c
@@ -0,0 +1,64 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the audio
+ *  gateway.
+ *
+ ******************************************************************************/
+
+#include "gki.h"
+#include "bta_api.h"
+#include "bta_ag_api.h"
+
+#ifndef BTA_AG_CIND_INFO
+#define BTA_AG_CIND_INFO     "(\"call\",(0,1)),(\"callsetup\",(0-3)),(\"service\",(0-3)),(\"signal\",(0-6)),(\"roam\",(0,1)),(\"battchg\",(0-5)),(\"callheld\",(0-2)),(\"bearer\",(0-7))"
+#endif
+
+#ifndef BTA_AG_CHLD_VAL_ECC
+#define BTA_AG_CHLD_VAL_ECC  "(0,1,1x,2,2x,3,4)"
+#endif
+
+#ifndef BTA_AG_CHLD_VAL
+#define BTA_AG_CHLD_VAL  "(0,1,2,3,4)"
+#endif
+
+#ifndef BTA_AG_CONN_TIMEOUT
+#define BTA_AG_CONN_TIMEOUT     5000
+#endif
+
+#ifndef BTA_AG_SCO_PKT_TYPES
+/* S1 packet type setting from HFP 1.5 spec */
+#define BTA_AG_SCO_PKT_TYPES    /* BTM_SCO_LINK_ALL_PKT_MASK */ (BTM_SCO_LINK_ONLY_MASK          | \
+                                                                 BTM_SCO_PKT_TYPES_MASK_EV3      | \
+                                                                 BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | \
+                                                                 BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | \
+                                                                 BTM_SCO_PKT_TYPES_MASK_NO_3_EV5)
+#endif
+
+const tBTA_AG_CFG bta_ag_cfg =
+{
+    BTA_AG_CIND_INFO,
+    BTA_AG_CONN_TIMEOUT,
+    BTA_AG_SCO_PKT_TYPES,
+    BTA_AG_CHLD_VAL_ECC,
+    BTA_AG_CHLD_VAL
+};
+
+tBTA_AG_CFG *p_bta_ag_cfg = (tBTA_AG_CFG *) &bta_ag_cfg;
diff --git a/bta/ag/bta_ag_ci.c b/bta/ag/bta_ag_ci.c
new file mode 100644
index 0000000..fd39e34
--- /dev/null
+++ b/bta/ag/bta_ag_ci.c
@@ -0,0 +1,98 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for audio gateway call-in functions.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bta_api.h"
+#include "bta_ag_api.h"
+#include "bta_ag_int.h"
+#include "bta_ag_ci.h"
+#include "gki.h"
+
+/******************************************************************************
+**
+** Function         bta_ag_ci_rx_write
+**
+** Description      This function is called to send data to the AG when the AG
+**                  is configured for AT command pass-through.  The function
+**                  copies data to an event buffer and sends it.
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_ci_rx_write(UINT16 handle, char *p_data, UINT16 len)
+{
+    tBTA_AG_CI_RX_WRITE *p_buf;
+    UINT16 len_remaining = len;
+    char *p_data_area;
+
+    if (len > (RFCOMM_DATA_POOL_BUF_SIZE - sizeof(tBTA_AG_CI_RX_WRITE) - 1))
+        len = RFCOMM_DATA_POOL_BUF_SIZE - sizeof(tBTA_AG_CI_RX_WRITE) - 1;
+
+    while (len_remaining)
+    {
+        if (len_remaining < len)
+            len = len_remaining;
+
+        if ((p_buf = (tBTA_AG_CI_RX_WRITE *) GKI_getbuf((UINT16)(sizeof(tBTA_AG_CI_RX_WRITE) + len + 1))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_CI_RX_WRITE_EVT;
+        p_buf->hdr.layer_specific = handle;
+
+        p_data_area = (char *)(p_buf+1);        /* Point to data area after header */
+        strncpy(p_data_area, p_data, len);
+        p_data_area[len] = 0;
+
+        bta_sys_sendmsg(p_buf);
+        } else {
+        APPL_TRACE_ERROR1("ERROR: Unable to allocate buffer to hold AT response code. len=%i", len);
+            break;
+        }
+
+        len_remaining-=len;
+        p_data+=len;
+    }
+}
+
+/******************************************************************************
+**
+** Function         bta_ag_ci_slc_ready
+**
+** Description      This function is called to notify AG that SLC is up at
+**                  the application. This funcion is only used when the app
+**                  is running in pass-through mode.
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ag_ci_slc_ready(UINT16 handle)
+{
+    tBTA_AG_DATA *p_buf;
+
+    if ((p_buf = (tBTA_AG_DATA *)GKI_getbuf(sizeof(tBTA_AG_DATA))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AG_CI_SLC_READY_EVT;
+        p_buf->hdr.layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
diff --git a/bta/ag/bta_ag_cmd.c b/bta/ag/bta_ag_cmd.c
new file mode 100644
index 0000000..d552eed
--- /dev/null
+++ b/bta/ag/bta_ag_cmd.c
@@ -0,0 +1,1836 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for processing AT commands and results.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_int.h"
+#include "bta_ag_at.h"
+#include "port_api.h"
+#include "utl.h"
+#include <stdio.h>
+#include <string.h>
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* ring timeout */
+#define BTA_AG_RING_TOUT        10000
+
+#define BTA_AG_CMD_MAX_VAL      32767  /* Maximum value is signed 16-bit value */
+
+
+
+/* clip type constants */
+#define BTA_AG_CLIP_TYPE_MIN        128
+#define BTA_AG_CLIP_TYPE_MAX        175
+#define BTA_AG_CLIP_TYPE_DEFAULT    129
+#define BTA_AG_CLIP_TYPE_VOIP       255
+
+#if defined(BTA_AG_MULTI_RESULT_INCLUDED) && (BTA_AG_MULTI_RESULT_INCLUDED == TRUE)
+#define BTA_AG_AT_MULTI_LEN            2
+#define AT_SET_RES_CB(res_cb, c, p, i) {res_cb.code = c; res_cb.p_arg = p; res_cb.int_arg = i;}
+
+/* type for AT result code block */
+typedef struct
+{
+    UINT8 code;
+    char *p_arg;
+    INT16 int_arg;
+} tBTA_AG_RESULT_CB;
+
+/* type for multiple AT result codes block */
+typedef struct
+{
+    UINT8 num_result;
+    tBTA_AG_RESULT_CB res_cb[BTA_AG_AT_MULTI_LEN];
+} tBTA_AG_MULTI_RESULT_CB;
+#endif
+
+/* enumeration of HSP AT commands matches HSP command interpreter table */
+enum
+{
+    BTA_AG_HS_CMD_CKPD,
+    BTA_AG_HS_CMD_VGS,
+    BTA_AG_HS_CMD_VGM
+};
+
+/* enumeration of HFP AT commands matches HFP command interpreter table */
+enum
+{
+    BTA_AG_HF_CMD_A,
+    BTA_AG_HF_CMD_D,
+    BTA_AG_HF_CMD_VGS,
+    BTA_AG_HF_CMD_VGM,
+    BTA_AG_HF_CMD_CCWA,
+    BTA_AG_HF_CMD_CHLD,
+    BTA_AG_HF_CMD_CHUP,
+    BTA_AG_HF_CMD_CIND,
+    BTA_AG_HF_CMD_CLIP,
+    BTA_AG_HF_CMD_CMER,
+    BTA_AG_HF_CMD_VTS,
+    BTA_AG_HF_CMD_BINP,
+    BTA_AG_HF_CMD_BLDN,
+    BTA_AG_HF_CMD_BVRA,
+    BTA_AG_HF_CMD_BRSF,
+    BTA_AG_HF_CMD_NREC,
+    BTA_AG_HF_CMD_CNUM,
+    BTA_AG_HF_CMD_BTRH,
+    BTA_AG_HF_CMD_CLCC,
+    BTA_AG_HF_CMD_COPS,
+    BTA_AG_HF_CMD_CMEE,
+    BTA_AG_HF_CMD_BIA,
+    BTA_AG_HF_CMD_CBC,
+    BTA_AG_HF_CMD_BCC,
+    BTA_AG_HF_CMD_BCS,
+    BTA_AG_HF_CMD_BAC
+};
+
+/* AT command interpreter table for HSP */
+const tBTA_AG_AT_CMD bta_ag_hsp_cmd[] =
+{
+    {"+CKPD",   BTA_AG_AT_SET,                      BTA_AG_AT_INT, 200, 200},
+    {"+VGS",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,  15},
+    {"+VGM",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,  15},
+    {"",        BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0}
+};
+
+/* AT command interpreter table for HFP */
+const tBTA_AG_AT_CMD bta_ag_hfp_cmd[] =
+{
+    {"A",       BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"D",       (BTA_AG_AT_NONE | BTA_AG_AT_FREE),  BTA_AG_AT_STR,   0,   0},
+    {"+VGS",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,  15},
+    {"+VGM",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,  15},
+    {"+CCWA",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   1},
+    /* Consider CHLD as str to take care of indexes for ECC */
+    {"+CHLD",   (BTA_AG_AT_SET | BTA_AG_AT_TEST),   BTA_AG_AT_STR,   0,   4},
+    {"+CHUP",   BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"+CIND",   (BTA_AG_AT_READ | BTA_AG_AT_TEST),  BTA_AG_AT_STR,   0,   0},
+    {"+CLIP",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   1},
+    {"+CMER",   BTA_AG_AT_SET,                      BTA_AG_AT_STR,   0,   0},
+    {"+VTS",    BTA_AG_AT_SET,                      BTA_AG_AT_STR,   0,   0},
+    {"+BINP",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   1,   1},
+    {"+BLDN",   BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"+BVRA",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   1},
+    {"+BRSF",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   BTA_AG_CMD_MAX_VAL},
+    {"+NREC",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   0},
+    {"+CNUM",   BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"+BTRH",   (BTA_AG_AT_READ | BTA_AG_AT_SET),   BTA_AG_AT_INT,   0,   2},
+    {"+CLCC",   BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"+COPS",   (BTA_AG_AT_READ | BTA_AG_AT_SET),   BTA_AG_AT_STR,   0,   0},
+    {"+CMEE",   BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   1},
+    {"+BIA",    BTA_AG_AT_SET,                      BTA_AG_AT_STR,   0,   20},
+    {"+CBC",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   100},
+    {"+BCC",    BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0},
+    {"+BCS",    BTA_AG_AT_SET,                      BTA_AG_AT_INT,   0,   BTA_AG_CMD_MAX_VAL},
+    {"+BAC",    BTA_AG_AT_SET,                      BTA_AG_AT_STR,   0,   0},
+    {"",        BTA_AG_AT_NONE,                     BTA_AG_AT_STR,   0,   0}
+};
+
+/* AT result code table element */
+typedef struct
+{
+    const char  *p_res;         /* AT result string */
+    UINT8       fmt;            /* whether argument is int or string */
+} tBTA_AG_RESULT;
+
+/* AT result code argument types */
+enum
+{
+    BTA_AG_RES_FMT_NONE,       /* no argument */
+    BTA_AG_RES_FMT_INT,        /* integer argument */
+    BTA_AG_RES_FMT_STR         /* string argument */
+};
+
+/* enumeration of AT result codes, matches constant table */
+enum
+{
+    BTA_AG_RES_OK,
+    BTA_AG_RES_ERROR,
+    BTA_AG_RES_RING,
+    BTA_AG_RES_VGS,
+    BTA_AG_RES_VGM,
+    BTA_AG_RES_CCWA,
+    BTA_AG_RES_CHLD,
+    BTA_AG_RES_CIND,
+    BTA_AG_RES_CLIP,
+    BTA_AG_RES_CIEV,
+    BTA_AG_RES_BINP,
+    BTA_AG_RES_BVRA,
+    BTA_AG_RES_BRSF,
+    BTA_AG_RES_BSIR,
+    BTA_AG_RES_CNUM,
+    BTA_AG_RES_BTRH,
+    BTA_AG_RES_CLCC,
+    BTA_AG_RES_COPS,
+    BTA_AG_RES_CMEE,
+    BTA_AG_RES_BCS,
+    BTA_AG_RES_UNAT
+};
+
+#if defined(BTA_HSP_RESULT_REPLACE_COLON) && (BTA_HSP_RESULT_REPLACE_COLON == TRUE)
+#define COLON_IDX_4_VGSVGM    4
+#endif
+/* AT result code constant table  (Indexed by result code) */
+const tBTA_AG_RESULT bta_ag_result_tbl[] =
+{
+    {"OK",      BTA_AG_RES_FMT_NONE},
+    {"ERROR",   BTA_AG_RES_FMT_NONE},
+    {"RING",    BTA_AG_RES_FMT_NONE},
+    {"+VGS: ",  BTA_AG_RES_FMT_INT},
+    {"+VGM: ",  BTA_AG_RES_FMT_INT},
+    {"+CCWA: ", BTA_AG_RES_FMT_STR},
+    {"+CHLD: ", BTA_AG_RES_FMT_STR},
+    {"+CIND: ", BTA_AG_RES_FMT_STR},
+    {"+CLIP: ", BTA_AG_RES_FMT_STR},
+    {"+CIEV: ", BTA_AG_RES_FMT_STR},
+    {"+BINP: ", BTA_AG_RES_FMT_STR},
+    {"+BVRA: ", BTA_AG_RES_FMT_INT},
+    {"+BRSF: ", BTA_AG_RES_FMT_INT},
+    {"+BSIR: ", BTA_AG_RES_FMT_INT},
+    {"+CNUM: ", BTA_AG_RES_FMT_STR},
+    {"+BTRH: ", BTA_AG_RES_FMT_INT},
+    {"+CLCC: ", BTA_AG_RES_FMT_STR},
+    {"+COPS: ", BTA_AG_RES_FMT_STR},
+    {"+CME ERROR: ", BTA_AG_RES_FMT_INT},
+    {"+BCS: ",  BTA_AG_RES_FMT_INT},
+    {"",        BTA_AG_RES_FMT_STR}
+};
+
+const tBTA_AG_AT_CMD *bta_ag_at_tbl[BTA_AG_NUM_IDX] =
+{
+    bta_ag_hsp_cmd,
+    bta_ag_hfp_cmd
+};
+
+/* callback event lookup table for HSP */
+const tBTA_AG_EVT bta_ag_hsp_cb_evt[] =
+{
+    BTA_AG_AT_CKPD_EVT,     /* BTA_AG_HS_CMD_CKPD */
+    BTA_AG_SPK_EVT,         /* BTA_AG_HS_CMD_VGS */
+    BTA_AG_MIC_EVT          /* BTA_AG_HS_CMD_VGM */
+};
+
+/* callback event lookup table for HFP  (Indexed by command) */
+const tBTA_AG_EVT bta_ag_hfp_cb_evt[] =
+{
+    BTA_AG_AT_A_EVT,        /* BTA_AG_HF_CMD_A */
+    BTA_AG_AT_D_EVT,        /* BTA_AG_HF_CMD_D */
+    BTA_AG_SPK_EVT,         /* BTA_AG_HF_CMD_VGS */
+    BTA_AG_MIC_EVT,         /* BTA_AG_HF_CMD_VGM */
+    0,                      /* BTA_AG_HF_CMD_CCWA */
+    BTA_AG_AT_CHLD_EVT,     /* BTA_AG_HF_CMD_CHLD */
+    BTA_AG_AT_CHUP_EVT,     /* BTA_AG_HF_CMD_CHUP */
+    BTA_AG_AT_CIND_EVT,     /* BTA_AG_HF_CMD_CIND */
+    0,                      /* BTA_AG_HF_CMD_CLIP */
+    0,                      /* BTA_AG_HF_CMD_CMER */
+    BTA_AG_AT_VTS_EVT,      /* BTA_AG_HF_CMD_VTS */
+    BTA_AG_AT_BINP_EVT,     /* BTA_AG_HF_CMD_BINP */
+    BTA_AG_AT_BLDN_EVT,     /* BTA_AG_HF_CMD_BLDN */
+    BTA_AG_AT_BVRA_EVT,     /* BTA_AG_HF_CMD_BVRA */
+    0,                      /* BTA_AG_HF_CMD_BRSF */
+    BTA_AG_AT_NREC_EVT,     /* BTA_AG_HF_CMD_NREC */
+    BTA_AG_AT_CNUM_EVT,     /* BTA_AG_HF_CMD_CNUM */
+    BTA_AG_AT_BTRH_EVT,     /* BTA_AG_HF_CMD_BTRH */
+    BTA_AG_AT_CLCC_EVT,     /* BTA_AG_HF_CMD_CLCC */
+    BTA_AG_AT_COPS_EVT,     /* BTA_AG_HF_CMD_COPS */
+    0,                      /* BTA_AG_HF_CMD_CMEE */
+    0,                      /* BTA_AG_HF_CMD_BIA */
+    BTA_AG_AT_CBC_EVT,      /* BTA_AG_HF_CMD_CBC */
+    0,                      /* BTA_AG_HF_CMD_BCC */
+    BTA_AG_AT_BCS_EVT,      /* BTA_AG_HF_CMD_BCS */
+    BTA_AG_AT_BAC_EVT       /* BTA_AG_HF_CMD_BAC */
+};
+
+/* translation of API result code values to internal values */
+const UINT8 bta_ag_trans_result[] =
+{
+    BTA_AG_RES_VGS,     /* BTA_AG_SPK_RES */
+    BTA_AG_RES_VGM,     /* BTA_AG_MIC_RES */
+    BTA_AG_RES_BSIR,    /* BTA_AG_INBAND_RING_RES */
+    BTA_AG_RES_CIND,    /* BTA_AG_CIND_RES */
+    BTA_AG_RES_BINP,    /* BTA_AG_BINP_RES */
+    BTA_AG_RES_CIEV,    /* BTA_AG_IND_RES */
+    BTA_AG_RES_BVRA,    /* BTA_AG_BVRA_RES */
+    BTA_AG_RES_CNUM,    /* BTA_AG_CNUM_RES */
+    BTA_AG_RES_BTRH,    /* BTA_AG_BTRH_RES */
+    BTA_AG_RES_CLCC,    /* BTA_AG_CLCC_RES */
+    BTA_AG_RES_COPS,    /* BTA_AG_COPS_RES */
+    0,                  /* BTA_AG_IN_CALL_RES */
+    0,                  /* BTA_AG_IN_CALL_CONN_RES */
+    BTA_AG_RES_CCWA,    /* BTA_AG_CALL_WAIT_RES */
+    0,                  /* BTA_AG_OUT_CALL_ORIG_RES */
+    0,                  /* BTA_AG_OUT_CALL_ALERT_RES */
+    0,                  /* BTA_AG_OUT_CALL_CONN_RES */
+    0,                  /* BTA_AG_CALL_CANCEL_RES */
+    0,                  /* BTA_AG_END_CALL_RES */
+    0,                  /* BTA_AG_IN_CALL_HELD_RES */
+    BTA_AG_RES_UNAT     /* BTA_AG_UNAT_RES */
+};
+
+/* callsetup indicator value lookup table */
+const UINT8 bta_ag_callsetup_ind_tbl[] =
+{
+    0,                          /* BTA_AG_SPK_RES */
+    0,                          /* BTA_AG_MIC_RES */
+    0,                          /* BTA_AG_INBAND_RING_RES */
+    0,                          /* BTA_AG_CIND_RES */
+    0,                          /* BTA_AG_BINP_RES */
+    0,                          /* BTA_AG_IND_RES */
+    0,                          /* BTA_AG_BVRA_RES */
+    0,                          /* BTA_AG_CNUM_RES */
+    0,                          /* BTA_AG_BTRH_RES */
+    0,                          /* BTA_AG_CLCC_RES */
+    0,                          /* BTA_AG_COPS_RES */
+    BTA_AG_CALLSETUP_INCOMING,  /* BTA_AG_IN_CALL_RES */
+    BTA_AG_CALLSETUP_NONE,      /* BTA_AG_IN_CALL_CONN_RES */
+    BTA_AG_CALLSETUP_INCOMING,  /* BTA_AG_CALL_WAIT_RES */
+    BTA_AG_CALLSETUP_OUTGOING,  /* BTA_AG_OUT_CALL_ORIG_RES */
+    BTA_AG_CALLSETUP_ALERTING,  /* BTA_AG_OUT_CALL_ALERT_RES */
+    BTA_AG_CALLSETUP_NONE,      /* BTA_AG_OUT_CALL_CONN_RES */
+    BTA_AG_CALLSETUP_NONE,      /* BTA_AG_CALL_CANCEL_RES */
+    BTA_AG_CALLSETUP_NONE,      /* BTA_AG_END_CALL_RES */
+    BTA_AG_CALLSETUP_NONE       /* BTA_AG_IN_CALL_HELD_RES */
+};
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_result
+**
+** Description      Send an AT result code.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_send_result(tBTA_AG_SCB *p_scb, UINT8 code, char *p_arg,
+                               INT16 int_arg)
+{
+    char    buf[BTA_AG_AT_MAX_LEN + 16];
+    char    *p = buf;
+    UINT16  len;
+
+#if defined(BTA_AG_RESULT_DEBUG) && (BTA_AG_RESULT_DEBUG == TRUE)
+    memset(buf, NULL, sizeof(buf));
+#endif
+    /* init with \r\n */
+    *p++ = '\r';
+    *p++ = '\n';
+
+    /* copy result code string */
+    BCM_STRCPY_S(p, sizeof(buf), bta_ag_result_tbl[code].p_res);
+#if defined(BTA_HSP_RESULT_REPLACE_COLON) && (BTA_HSP_RESULT_REPLACE_COLON == TRUE)
+    if(p_scb->conn_service == BTA_AG_HSP)
+    {
+        /* If HSP then ":"symbol should be changed as "=" for HSP compatibility */
+        switch(code)
+        {
+        case BTA_AG_RES_VGS:
+        case BTA_AG_RES_VGM:
+            if(*(p+COLON_IDX_4_VGSVGM) == ':')
+            {
+                #if defined(BTA_AG_RESULT_DEBUG) && (BTA_AG_RESULT_DEBUG == TRUE)
+                APPL_TRACE_DEBUG0("[HSP] ':'symbol is changed as '=' for HSP compatibility");
+                #endif
+                *(p+COLON_IDX_4_VGSVGM) = '=';
+            }
+            break;
+        }
+    }
+#endif
+    p += strlen(bta_ag_result_tbl[code].p_res);
+
+    /* copy argument if any */
+    if (bta_ag_result_tbl[code].fmt == BTA_AG_RES_FMT_INT)
+    {
+        p += utl_itoa((UINT16) int_arg, p);
+    }
+    else if (bta_ag_result_tbl[code].fmt == BTA_AG_RES_FMT_STR)
+    {
+        BCM_STRCPY_S(p, sizeof(buf), p_arg);
+        p += strlen(p_arg);
+    }
+
+    /* finish with \r\n */
+    *p++ = '\r';
+    *p++ = '\n';
+
+#if defined(BTA_AG_RESULT_DEBUG) && (BTA_AG_RESULT_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("bta_ag_send_result: %s", buf);
+#endif
+
+    /* send to RFCOMM */
+    PORT_WriteData(p_scb->conn_handle, buf, (UINT16) (p - buf), &len);
+}
+
+#if defined(BTA_AG_MULTI_RESULT_INCLUDED) && (BTA_AG_MULTI_RESULT_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_ag_send_multi_result
+**
+** Description      Send multiple AT result codes.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_send_multi_result(tBTA_AG_SCB *p_scb, tBTA_AG_MULTI_RESULT_CB *m_res_cb)
+{
+    char    buf[BTA_AG_AT_MAX_LEN * BTA_AG_AT_MULTI_LEN + 16];
+    char    *p = buf;
+    UINT16  len;
+    UINT8   res_idx = 0;
+
+    if((!m_res_cb) || (m_res_cb->num_result == 0) || (m_res_cb->num_result > BTA_AG_AT_MULTI_LEN))
+    {
+        APPL_TRACE_DEBUG0("m_res_cb is NULL or num_result is out of range.");
+        return;
+    }
+
+#if defined(BTA_AG_RESULT_DEBUG) && (BTA_AG_RESULT_DEBUG == TRUE)
+    memset(buf, NULL, sizeof(buf));
+#endif
+
+    while(res_idx < m_res_cb->num_result)
+    {
+        /* init with \r\n */
+        *p++ = '\r';
+        *p++ = '\n';
+
+        /* copy result code string */
+        BCM_STRCPY_S(p, sizeof(buf), bta_ag_result_tbl[m_res_cb->res_cb[res_idx].code].p_res);
+        p += strlen(bta_ag_result_tbl[m_res_cb->res_cb[res_idx].code].p_res);
+
+        /* copy argument if any */
+        if (bta_ag_result_tbl[m_res_cb->res_cb[res_idx].code].fmt == BTA_AG_RES_FMT_INT)
+        {
+            p += utl_itoa((UINT16) m_res_cb->res_cb[res_idx].int_arg, p);
+        }
+        else if (bta_ag_result_tbl[m_res_cb->res_cb[res_idx].code].fmt == BTA_AG_RES_FMT_STR)
+        {
+            BCM_STRCPY_S(p, sizeof(buf), m_res_cb->res_cb[res_idx].p_arg);
+            p += strlen(m_res_cb->res_cb[res_idx].p_arg);
+        }
+
+        /* finish with \r\n */
+        *p++ = '\r';
+        *p++ = '\n';
+
+        res_idx++;
+    }
+
+#if defined(BTA_AG_RESULT_DEBUG) && (BTA_AG_RESULT_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("send_result: %s", buf);
+#endif
+
+    /* send to RFCOMM */
+    PORT_WriteData(p_scb->conn_handle, buf, (UINT16) (p - buf), &len);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_ok
+**
+** Description      Send an OK result code.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_send_ok(tBTA_AG_SCB *p_scb)
+{
+    bta_ag_send_result(p_scb, BTA_AG_RES_OK, NULL, 0);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_error
+**
+** Description      Send an ERROR result code.
+**                      errcode - used to send verbose errocode
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_send_error(tBTA_AG_SCB *p_scb, INT16 errcode)
+{
+    /* If HFP and extended audio gateway error codes are enabled */
+    if (p_scb->conn_service == BTA_AG_HFP && p_scb->cmee_enabled)
+        bta_ag_send_result(p_scb, BTA_AG_RES_CMEE, NULL, errcode);
+    else
+        bta_ag_send_result(p_scb, BTA_AG_RES_ERROR, NULL, 0);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_ind
+**
+** Description      Send an indicator CIEV result code.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_send_ind(tBTA_AG_SCB *p_scb, UINT16 id, UINT16 value, BOOLEAN on_demand)
+{
+    char    str[12];
+    char    *p = str;
+
+    /* If the indicator is masked out, just return */
+    /* Mandatory indicators can not be masked out. */
+    if ((p_scb->bia_masked_out & ((UINT32)1 << id)) &&
+        ((id != BTA_AG_IND_CALL) && (id != BTA_AG_IND_CALLSETUP) && (id != BTA_AG_IND_CALLHELD)))
+        return;
+
+    /* Ensure we do not send duplicate indicators if not requested by app */
+    /* If it was requested by app, transmit CIEV even if it is duplicate. */
+    if (id == BTA_AG_IND_CALL)
+    {
+        if ((value == p_scb->call_ind) && (on_demand == FALSE))
+            return;
+
+        p_scb->call_ind = (UINT8)value;
+    }
+
+    if ((id == BTA_AG_IND_CALLSETUP) && (on_demand == FALSE))
+    {
+        if (value == p_scb->callsetup_ind)
+            return;
+
+        p_scb->callsetup_ind = (UINT8)value;
+    }
+
+    if ((id == BTA_AG_IND_SERVICE) && (on_demand == FALSE))
+    {
+        if (value == p_scb->service_ind)
+            return;
+
+        p_scb->service_ind = (UINT8)value;
+    }
+    if ((id == BTA_AG_IND_SIGNAL) && (on_demand == FALSE))
+    {
+        if (value == p_scb->signal_ind)
+            return;
+
+        p_scb->signal_ind = (UINT8)value;
+    }
+    if ((id == BTA_AG_IND_ROAM) && (on_demand == FALSE))
+    {
+        if (value == p_scb->roam_ind)
+            return;
+
+        p_scb->roam_ind = (UINT8)value;
+    }
+    if ((id == BTA_AG_IND_BATTCHG) && (on_demand == FALSE))
+    {
+        if (value == p_scb->battchg_ind)
+            return;
+
+        p_scb->battchg_ind = (UINT8)value;
+    }
+
+    if ((id == BTA_AG_IND_CALLHELD) && (on_demand == FALSE))
+    {
+        /* call swap could result in sending callheld=1 multiple times */
+        if ((value != 1) && (value == p_scb->callheld_ind))
+            return;
+
+        p_scb->callheld_ind = (UINT8)value;
+    }
+
+    if (p_scb->cmer_enabled)
+    {
+        p += utl_itoa(id, p);
+        *p++ = ',';
+        utl_itoa(value, p);
+        bta_ag_send_result(p_scb, BTA_AG_RES_CIEV, str, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_parse_cmer
+**
+** Description      Parse AT+CMER parameter string.
+**
+**
+** Returns          TRUE if parsed ok, FALSE otherwise.
+**
+*******************************************************************************/
+static BOOLEAN bta_ag_parse_cmer(char *p_s, BOOLEAN *p_enabled)
+{
+    INT16   n[4] = {-1, -1, -1, -1};
+    int     i;
+    char    *p;
+
+    for (i = 0; i < 4; i++)
+    {
+        /* skip to comma delimiter */
+        for (p = p_s; *p != ',' && *p != 0; p++);
+
+        /* get integer value */
+        *p = 0;
+        n[i] = utl_str2int(p_s);
+        p_s = p + 1;
+        if (p_s == 0)
+        {
+            break;
+        }
+    }
+
+    /* process values */
+    if (n[0] < 0 || n[3] < 0)
+    {
+        return FALSE;
+    }
+
+    if ((n[0] == 3) && ((n[3] == 1) || (n[3] == 0)))
+    {
+        *p_enabled = (BOOLEAN) n[3];
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_parse_chld
+**
+** Description      Parse AT+CHLD parameter string.
+**
+**
+** Returns          Returns idx (1-7), or 0 if ECC not enabled or idx doesn't exist
+**
+*******************************************************************************/
+static UINT8 bta_ag_parse_chld(tBTA_AG_SCB *p_scb, char *p_s)
+{
+    UINT8   retval = 0;
+    INT16   idx = -1;
+
+    if (p_s[1] != 0)
+    {
+        /* p_idxstr++;  point to beginning of call number */
+        idx = utl_str2int(&p_s[1]);
+        if (idx != -1 && idx < 255)
+            retval = (UINT8)idx;
+    }
+
+    return (retval);
+}
+
+#if (BTM_WBS_INCLUDED == TRUE )
+/*******************************************************************************
+**
+** Function         bta_ag_parse_bac
+**
+** Description      Parse AT+BAC parameter string.
+**
+** Returns          Returns bitmap of supported codecs.
+**
+*******************************************************************************/
+static tBTA_AG_PEER_CODEC bta_ag_parse_bac(tBTA_AG_SCB *p_scb, char *p_s)
+{
+    tBTA_AG_PEER_CODEC  retval = BTA_AG_CODEC_NONE;
+    UINT16  uuid_codec;
+    BOOLEAN cont = FALSE;       /* Continue processing */
+    char *p;
+
+    while(p_s)
+    {
+        /* skip to comma delimiter */
+        for(p = p_s; *p != ',' && *p != 0; p++);
+
+        /* get integre value */
+        if (*p != 0)
+        {
+            *p = 0;
+            cont = TRUE;
+        }
+        else
+            cont = FALSE;
+
+        uuid_codec = utl_str2int(p_s);
+        switch(uuid_codec)
+        {
+            case UUID_CODEC_CVSD:   retval |= BTA_AG_CODEC_CVSD;     break;
+            case UUID_CODEC_MSBC:   retval |= BTA_AG_CODEC_MSBC;     break;
+            default:
+                APPL_TRACE_ERROR1("Unknown Codec UUID(%d) received", uuid_codec);
+                return BTA_AG_CODEC_NONE;
+        }
+
+        if (cont)
+            p_s = p + 1;
+        else
+            break;
+    }
+
+    return (retval);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_process_unat_res
+**
+** Description      Process the unat response data and remove extra carriage return
+**                  and line feed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void bta_ag_process_unat_res(char *unat_result)
+{
+    UINT8   str_leng;
+    UINT8   i = 0;
+    UINT8   j = 0;
+    UINT8   pairs_of_nl_cr;
+    char    trim_data[BTA_AG_AT_MAX_LEN];
+
+
+
+    str_leng = strlen(unat_result);
+
+    /* If no extra CR and LF, just return */
+    if(str_leng < 4)
+        return;
+
+    /* Remove the carriage return and left feed */
+    while(unat_result[0] =='\r' && unat_result[1] =='\n'
+        && unat_result[str_leng-2] =='\r' && unat_result[str_leng-1] =='\n')
+    {
+        pairs_of_nl_cr = 1;
+        for (i=0;i<(str_leng-4*pairs_of_nl_cr);i++)
+        {
+            trim_data[j++] = unat_result[i+pairs_of_nl_cr*2];
+        }
+        /* Add EOF */
+        trim_data[j] = '\0';
+        str_leng = str_leng - 4;
+        BCM_STRNCPY_S(unat_result, BTA_AG_AT_MAX_LEN+1, trim_data,str_leng+1);
+        i=0;
+        j=0;
+
+        if(str_leng <4)
+            return;
+
+
+    }
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_inband_enabled
+**
+** Description      Determine whether in-band ring can be used.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_ag_inband_enabled(tBTA_AG_SCB *p_scb)
+{
+    /* if feature is enabled and no other scbs connected */
+    if (p_scb->inband_enabled && !bta_ag_other_scb_open(p_scb))
+    {
+        return TRUE;
+    }
+    else
+    {
+        return FALSE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_call_inds
+**
+** Description      Send call and callsetup indicators.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_send_call_inds(tBTA_AG_SCB *p_scb, tBTA_AG_RES result)
+{
+    UINT8 call = p_scb->call_ind;
+    UINT8 callsetup;
+
+    /* set new call and callsetup values based on BTA_AgResult */
+    callsetup = bta_ag_callsetup_ind_tbl[result];
+
+    if (result == BTA_AG_END_CALL_RES)
+    {
+        call = BTA_AG_CALL_INACTIVE;
+    }
+    else if (result == BTA_AG_IN_CALL_CONN_RES || result == BTA_AG_OUT_CALL_CONN_RES
+             || result == BTA_AG_IN_CALL_HELD_RES)
+    {
+        call = BTA_AG_CALL_ACTIVE;
+    }
+    else
+    {
+        call = p_scb->call_ind;
+    }
+
+    /* Send indicator function tracks if the values have actually changed */
+    bta_ag_send_ind(p_scb, BTA_AG_IND_CALL, call, FALSE);
+    bta_ag_send_ind(p_scb, BTA_AG_IND_CALLSETUP, callsetup, FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_at_hsp_cback
+**
+** Description      AT command processing callback for HSP.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_at_hsp_cback(tBTA_AG_SCB *p_scb, UINT16 cmd, UINT8 arg_type,
+                                char *p_arg, INT16 int_arg)
+{
+    tBTA_AG_VAL val;
+
+    APPL_TRACE_DEBUG4("AT cmd:%d arg_type:%d arg:%d arg:%s", cmd, arg_type,
+                      int_arg, p_arg);
+
+    /* send OK */
+    bta_ag_send_ok(p_scb);
+
+    val.hdr.handle = bta_ag_scb_to_idx(p_scb);
+    val.hdr.app_id = p_scb->app_id;
+    val.num = (UINT16) int_arg;
+    BCM_STRNCPY_S(val.str, sizeof(val.str), p_arg, BTA_AG_AT_MAX_LEN);
+    val.str[BTA_AG_AT_MAX_LEN] = 0;
+
+    /* call callback with event */
+    (*bta_ag_cb.p_cback)(bta_ag_hsp_cb_evt[cmd], (tBTA_AG *) &val);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_at_hfp_cback
+**
+** Description      AT command processing callback for HFP.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_at_hfp_cback(tBTA_AG_SCB *p_scb, UINT16 cmd, UINT8 arg_type,
+                                char *p_arg, INT16 int_arg)
+{
+    tBTA_AG_VAL     val;
+    tBTA_AG_EVT   event;
+    tBTA_AG_SCB     *ag_scb;
+    UINT32          i, ind_id;
+    UINT32          bia_masked_out;
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_PEER_CODEC  codec_type, codec_sent;
+#endif
+
+    APPL_TRACE_DEBUG4("HFP AT cmd:%d arg_type:%d arg:%d arg:%s", cmd, arg_type,
+                      int_arg, p_arg);
+
+    val.hdr.handle = bta_ag_scb_to_idx(p_scb);
+    val.hdr.app_id = p_scb->app_id;
+    val.num = int_arg;
+    BCM_STRNCPY_S(val.str, sizeof(val.str), p_arg, BTA_AG_AT_MAX_LEN);
+    val.str[BTA_AG_AT_MAX_LEN] = 0;
+
+    event = bta_ag_hfp_cb_evt[cmd];
+
+    switch (cmd)
+    {
+        case BTA_AG_HF_CMD_A:
+        case BTA_AG_HF_CMD_VGS:
+        case BTA_AG_HF_CMD_VGM:
+        case BTA_AG_HF_CMD_CHUP:
+        case BTA_AG_HF_CMD_CBC:
+            /* send OK */
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_HF_CMD_BLDN:
+            /* Do not send OK, App will send error or OK depending on
+            ** last dial number enabled or not */
+            break;
+
+        case BTA_AG_HF_CMD_D:
+            /* Do not send OK for Dial cmds
+            ** Let application decide whether to send OK or ERROR*/
+
+            /* if mem dial cmd, make sure string contains only digits */
+            if(p_arg[0] == '>')
+            {
+                if(!utl_isintstr(p_arg+1))
+                {
+                    event = 0;
+                    bta_ag_send_error(p_scb, BTA_AG_ERR_INV_CHAR_IN_DSTR);
+                }
+            }
+            else if (p_arg[0] == 'V')   /* ATDV : Dial VoIP Call */
+            {
+                /* We do not check string. Code will be added later if needed. */
+                if(!((p_scb->peer_features & BTA_AG_PEER_FEAT_VOIP) && (p_scb->features & BTA_AG_FEAT_VOIP)))
+                {
+                    event = 0;
+                    bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+                }
+            }
+            /* If dial cmd, make sure string contains only dial digits
+            ** Dial digits are 0-9, A-C, *, #, + */
+            else
+            {
+                if(!utl_isdialstr(p_arg))
+                {
+                    event = 0;
+                    bta_ag_send_error(p_scb, BTA_AG_ERR_INV_CHAR_IN_DSTR);
+                }
+            }
+            break;
+
+        case BTA_AG_HF_CMD_CCWA:
+            /* store setting */
+            p_scb->ccwa_enabled = (BOOLEAN) int_arg;
+
+            /* send OK */
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_HF_CMD_CHLD:
+            if (arg_type == BTA_AG_AT_TEST)
+            {
+                /* don't call callback */
+                event = 0;
+
+                /* send CHLD string */
+                /* Form string based on supported 1.5 feature */
+                if ((p_scb->peer_version >= HFP_VERSION_1_5) &&
+                    (p_scb->features & BTA_AG_FEAT_ECC) &&
+                    (p_scb->peer_features & BTA_AG_PEER_FEAT_ECC))
+                    bta_ag_send_result(p_scb, BTA_AG_RES_CHLD, p_bta_ag_cfg->chld_val_ecc, 0);
+                else
+                    bta_ag_send_result(p_scb, BTA_AG_RES_CHLD, p_bta_ag_cfg->chld_val, 0);
+
+                /* send OK */
+                bta_ag_send_ok(p_scb);
+
+                /* if service level conn. not already open, now it's open */
+                bta_ag_svc_conn_open(p_scb, NULL);
+
+            }
+            else
+            {
+                val.idx = bta_ag_parse_chld(p_scb, val.str);
+
+                if(val.idx && !((p_scb->features & BTA_AG_FEAT_ECC) && (p_scb->peer_features & BTA_AG_PEER_FEAT_ECC)))
+                {
+                    /* we do not support ECC, but HF is sending us a CHLD with call index*/
+                    event = 0;
+                    bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+
+                }
+                else
+                {
+
+                /* If it is swap between calls, set call held indicator to 3(out of valid 0-2)
+                ** Application will set it back to 1
+                ** callheld indicator will be sent across to the peer. */
+                if(val.str[0] == '2')
+                {
+                    for (i = 0, ag_scb = &bta_ag_cb.scb[0]; i < BTA_AG_NUM_SCB; i++, ag_scb++)
+                    {
+                        if (ag_scb->in_use)
+                        {
+                            if((ag_scb->call_ind == BTA_AG_CALL_ACTIVE)
+                                && (ag_scb->callsetup_ind == BTA_AG_CALLSETUP_NONE))
+                                ag_scb->callheld_ind = BTA_AG_CALLHELD_NOACTIVE + 1;
+                        }
+                    }
+                }
+                }
+
+                /* Do not send OK. Let app decide after parsing the val str */
+                /* bta_ag_send_ok(p_scb); */
+            }
+            break;
+
+        case BTA_AG_HF_CMD_CIND:
+            if (arg_type == BTA_AG_AT_TEST)
+            {
+                /* don't call callback */
+                event = 0;
+
+                /* send CIND string, send OK */
+                bta_ag_send_result(p_scb, BTA_AG_RES_CIND, p_bta_ag_cfg->cind_info, 0);
+                bta_ag_send_ok(p_scb);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_CLIP:
+            /* store setting, send OK */
+            p_scb->clip_enabled = (BOOLEAN) int_arg;
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_HF_CMD_CMER:
+            /* if parsed ok store setting, send OK */
+            if (bta_ag_parse_cmer(p_arg, &p_scb->cmer_enabled))
+            {
+                bta_ag_send_ok(p_scb);
+
+                /* if service level conn. not already open and our features and
+                ** peer features do not have 3-way, service level conn. now open
+                */
+                if (!p_scb->svc_conn &&
+                    !((p_scb->features & BTA_AG_FEAT_3WAY) && (p_scb->peer_features & BTA_AG_PEER_FEAT_3WAY)))
+                {
+                    bta_ag_svc_conn_open(p_scb, NULL);
+                }
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, BTA_AG_ERR_INV_CHAR_IN_TSTR);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_VTS:
+            /* check argument */
+            if (strlen(p_arg) == 1)
+            {
+                bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_INV_CHAR_IN_TSTR);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_BINP:
+            /* if feature not set don't call callback, send ERROR */
+            if (!(p_scb->features & BTA_AG_FEAT_VTAG))
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_BVRA:
+            /* if feature not supported don't call callback, send ERROR. App will send OK */
+            if (!(p_scb->features & BTA_AG_FEAT_VREC))
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_BRSF:
+            /* store peer features */
+            p_scb->peer_features = (UINT16) int_arg;
+
+            /* send BRSF, send OK */
+            bta_ag_send_result(p_scb, BTA_AG_RES_BRSF, NULL,
+                               (INT16) (p_scb->features & BTA_AG_BSRF_FEAT_SPEC));
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_HF_CMD_NREC:
+            /* if feature send OK, else don't call callback, send ERROR */
+            if (p_scb->features & BTA_AG_FEAT_ECNR)
+            {
+                bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_BTRH:
+            /* if feature send BTRH, send OK:, else don't call callback, send ERROR */
+            if (p_scb->features & BTA_AG_FEAT_BTRH)
+            {
+                /* If set command; send response and notify app */
+                if (arg_type == BTA_AG_AT_SET)
+                {
+                    for (i = 0, ag_scb = &bta_ag_cb.scb[0]; i < BTA_AG_NUM_SCB; i++, ag_scb++)
+                    {
+                        if (ag_scb->in_use)
+                        {
+                            bta_ag_send_result(ag_scb, BTA_AG_RES_BTRH, NULL, int_arg);
+                        }
+                    }
+                    bta_ag_send_ok(p_scb);
+                }
+                else /* Read Command */
+                {
+                    val.num = BTA_AG_BTRH_READ;
+                }
+            }
+            else
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_COPS:
+            if (arg_type == BTA_AG_AT_SET)
+            {
+                /* don't call callback */
+                event = 0;
+
+                /* send OK */
+                bta_ag_send_ok(p_scb);
+            }
+            break;
+
+        case BTA_AG_HF_CMD_CMEE:
+            if (p_scb->features & BTA_AG_FEAT_EXTERR)
+            {
+                /* store setting */
+                p_scb->cmee_enabled = (BOOLEAN) int_arg;
+
+                /* send OK */
+                bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            /* don't call callback */
+            event = 0;
+            break;
+
+        case BTA_AG_HF_CMD_BIA:
+            /* don't call callback */
+            event = 0;
+
+            bia_masked_out = p_scb->bia_masked_out;
+
+            /* Parse the indicator mask */
+            for (i = 0, ind_id = 1; (val.str[i] != 0) && (ind_id <= 20); i++, ind_id++)
+            {
+                if (val.str[i] == ',')
+                    continue;
+
+                if (val.str[i] == '0')
+                    bia_masked_out |= ((UINT32)1 << ind_id);
+                else if (val.str[i] == '1')
+                    bia_masked_out &= ~((UINT32)1 << ind_id);
+                else
+                    break;
+
+                i++;
+                if ( (val.str[i] != 0) && (val.str[i] != ',') )
+                    break;
+            }
+            if (val.str[i] == 0)
+            {
+                p_scb->bia_masked_out = bia_masked_out;
+                bta_ag_send_ok (p_scb);
+            }
+            else
+                bta_ag_send_error (p_scb, BTA_AG_ERR_INVALID_INDEX);
+            break;
+
+        case BTA_AG_HF_CMD_CNUM:
+            break;
+        case BTA_AG_HF_CMD_CLCC:
+            if(!(p_scb->features & BTA_AG_FEAT_ECS))
+            {
+                event = 0;
+                bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            }
+            break;
+
+#if (BTM_WBS_INCLUDED == TRUE )
+        case BTA_AG_HF_CMD_BAC:
+            bta_ag_send_ok(p_scb);
+
+            /* store available codecs from the peer */
+            if((p_scb->peer_features & BTA_AG_PEER_FEAT_CODEC) && (p_scb->features & BTA_AG_FEAT_CODEC))
+            {
+                p_scb->peer_codecs = bta_ag_parse_bac(p_scb, p_arg);
+                p_scb->codec_updated = TRUE;
+
+                if (p_scb->peer_codecs & BTA_AG_CODEC_MSBC)
+                {
+                    p_scb->sco_codec = UUID_CODEC_MSBC;
+                    APPL_TRACE_DEBUG0("Received AT+BAC, updating sco codec to MSBC");
+                }
+                else
+                {
+                    p_scb->sco_codec = UUID_CODEC_CVSD;
+                    APPL_TRACE_DEBUG0("Received AT+BAC, updating sco codec to CVSD");
+                }
+
+                /* Received BAC while in codec negotiation. */
+                if ((bta_ag_cb.sco.state == BTA_AG_SCO_CODEC_ST) && (bta_ag_cb.sco.p_curr_scb == p_scb))
+                {
+                    bta_ag_codec_negotiate (p_scb);
+                }
+            }
+            else
+            {
+                p_scb->peer_codecs = BTA_AG_CODEC_NONE;
+                APPL_TRACE_ERROR0("Unexpected CMD:AT+BAC, Codec Negotiation is not supported");
+            }
+            break;
+
+        case BTA_AG_HF_CMD_BCS:
+            /* stop cn timer */
+            bta_sys_stop_timer(&p_scb->cn_timer);
+
+            switch(int_arg)
+            {
+                case UUID_CODEC_CVSD:   codec_type = BTA_AG_CODEC_CVSD;     break;
+                case UUID_CODEC_MSBC:   codec_type = BTA_AG_CODEC_MSBC;     break;
+                default:
+                    APPL_TRACE_ERROR1("Unknown codec_uuid %d", int_arg);
+                    codec_type = 0xFFFF;
+                    break;
+            }
+
+            if (p_scb->codec_fallback)
+                codec_sent = BTA_AG_CODEC_CVSD;
+            else
+                codec_sent = p_scb->sco_codec;
+
+            if(codec_type == codec_sent)
+                bta_ag_sco_codec_nego(p_scb, TRUE);
+            else
+                bta_ag_sco_codec_nego(p_scb, FALSE);
+
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_HF_CMD_BCC:
+            bta_ag_send_ok(p_scb);
+            bta_ag_sco_open(p_scb, NULL);
+            break;
+#endif
+
+        default:
+            break;
+    }
+
+    /* call callback */
+    if (event != 0)
+    {
+        (*bta_ag_cb.p_cback)(event, (tBTA_AG *) &val);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_at_err_cback
+**
+** Description      AT command parser error callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_at_err_cback(tBTA_AG_SCB *p_scb, BOOLEAN unknown, char *p_arg)
+{
+    tBTA_AG_VAL     val;
+
+    if(unknown && (!strlen(p_arg)))
+    {
+        APPL_TRACE_DEBUG0("Empty AT cmd string received");
+        bta_ag_send_ok(p_scb);
+        return;
+    }
+
+    /* if unknown AT command and configured to pass these to app */
+    if (unknown && (p_scb->features & BTA_AG_FEAT_UNAT))
+    {
+        val.hdr.handle = bta_ag_scb_to_idx(p_scb);
+        val.hdr.app_id = p_scb->app_id;
+        val.num = 0;
+        BCM_STRNCPY_S(val.str, sizeof(val.str), p_arg, BTA_AG_AT_MAX_LEN);
+        val.str[BTA_AG_AT_MAX_LEN] = 0;
+        (*bta_ag_cb.p_cback)(BTA_AG_AT_UNAT_EVT, (tBTA_AG *) &val);
+    }
+    else
+    {
+        bta_ag_send_error(p_scb, BTA_AG_ERR_OP_NOT_SUPPORTED);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_hsp_result
+**
+** Description      Handle API result for HSP connections.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_hsp_result(tBTA_AG_SCB *p_scb, tBTA_AG_API_RESULT *p_result)
+{
+    UINT8 code = bta_ag_trans_result[p_result->result];
+
+    APPL_TRACE_DEBUG1("bta_ag_hsp_result : res = %d", p_result->result);
+
+    switch(p_result->result)
+    {
+        case BTA_AG_SPK_RES:
+        case BTA_AG_MIC_RES:
+            bta_ag_send_result(p_scb, code, NULL, p_result->data.num);
+            break;
+
+        case BTA_AG_IN_CALL_RES:
+            /* tell sys to stop av if any */
+            bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+            /* if sco already opened or no inband ring send ring now */
+            if (bta_ag_sco_is_open(p_scb) || !bta_ag_inband_enabled(p_scb) ||
+                (p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                bta_ag_send_ring(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            /* else open sco, send ring after sco opened */
+            else
+            {
+                /* HSPv1.2: AG shall not send RING if using in-band ring tone. */
+                if (p_scb->hsp_version >= HSP_VERSION_1_2)
+                    p_scb->post_sco = BTA_AG_POST_SCO_NONE;
+                else
+                    p_scb->post_sco = BTA_AG_POST_SCO_RING;
+
+                bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            break;
+
+        case BTA_AG_IN_CALL_CONN_RES:
+        case BTA_AG_OUT_CALL_ORIG_RES:
+            /* if incoming call connected stop ring timer */
+            if (p_result->result == BTA_AG_IN_CALL_CONN_RES)
+            {
+                bta_sys_stop_timer(&p_scb->act_timer);
+            }
+
+            if (!(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                /* if audio connected to this scb open sco */
+                if (p_result->data.audio_handle == bta_ag_scb_to_idx(p_scb))
+                {
+                    bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+                /* else if no audio at call close sco */
+                else if (p_result->data.audio_handle == BTA_AG_HANDLE_NONE)
+                {
+                    bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+            }
+            break;
+
+        case BTA_AG_END_CALL_RES:
+            /* stop ring timer */
+            bta_sys_stop_timer(&p_scb->act_timer);
+
+            /* close sco */
+            if ((bta_ag_sco_is_open(p_scb) || bta_ag_sco_is_opening(p_scb)) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            else
+            {
+                /* if av got suspended by this call, let it resume. */
+                bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+            }
+            break;
+
+        case BTA_AG_INBAND_RING_RES:
+            p_scb->inband_enabled = p_result->data.state;
+            APPL_TRACE_DEBUG1("inband_enabled set to %d", p_scb->inband_enabled);
+            break;
+
+        case BTA_AG_UNAT_RES:
+            if (p_result->data.ok_flag != BTA_AG_OK_ERROR)
+            {
+                if (p_result->data.str[0] != 0)
+                {
+                    bta_ag_send_result(p_scb, code, p_result->data.str, 0);
+                }
+
+                if (p_result->data.ok_flag == BTA_AG_OK_DONE)
+                    bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, BTA_AG_ERR_INV_CHAR_IN_TSTR);
+            }
+            break;
+
+        default:
+            /* ignore all others */
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_hfp_result
+**
+** Description      Handle API result for HFP connections.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_hfp_result(tBTA_AG_SCB *p_scb, tBTA_AG_API_RESULT *p_result)
+{
+    UINT8 code = bta_ag_trans_result[p_result->result];
+
+    APPL_TRACE_DEBUG1("bta_ag_hfp_result : res = %d", p_result->result);
+
+    switch(p_result->result)
+    {
+        case BTA_AG_SPK_RES:
+        case BTA_AG_MIC_RES:
+            bta_ag_send_result(p_scb, code, NULL, p_result->data.num);
+            break;
+
+        case BTA_AG_IN_CALL_RES:
+            /* tell sys to stop av if any */
+            bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+            /* store caller id string.
+             * append type info at the end.
+             * make sure a valid type info is passed.
+             * otherwise add 129 as default type */
+            if ((p_result->data.num < BTA_AG_CLIP_TYPE_MIN) || (p_result->data.num > BTA_AG_CLIP_TYPE_MAX))
+            {
+                if (p_result->data.num != BTA_AG_CLIP_TYPE_VOIP)
+                    p_result->data.num = BTA_AG_CLIP_TYPE_DEFAULT;
+            }
+
+            APPL_TRACE_DEBUG1("CLIP type :%d", p_result->data.num);
+            p_scb->clip[0] = 0;
+            if (p_result->data.str[0] != 0)
+                sprintf(p_scb->clip,"%s,%d", p_result->data.str, p_result->data.num);
+
+            /* send callsetup indicator */
+            if (p_scb->post_sco == BTA_AG_POST_SCO_CALL_END)
+            {
+                /* Need to sent 2 callsetup IND's(Call End and Incoming call) after SCO close. */
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_END_INCALL;
+            }
+            else
+            {
+                bta_ag_send_call_inds(p_scb, p_result->result);
+
+                /* if sco already opened or no inband ring send ring now */
+                if (bta_ag_sco_is_open(p_scb) || !bta_ag_inband_enabled(p_scb) ||
+                    (p_scb->features & BTA_AG_FEAT_NOSCO))
+                {
+                    bta_ag_send_ring(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+                /* else open sco, send ring after sco opened */
+                else
+                {
+                    p_scb->post_sco = BTA_AG_POST_SCO_RING;
+                    bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+            }
+            break;
+
+        case BTA_AG_IN_CALL_CONN_RES:
+            /* stop ring timer */
+            bta_sys_stop_timer(&p_scb->act_timer);
+
+            /* if sco not opened and we need to open it, open sco first
+            ** then send indicators
+            */
+            if (p_result->data.audio_handle == bta_ag_scb_to_idx(p_scb) &&
+                !bta_ag_sco_is_open(p_scb) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_CONN;
+                bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            /* else if sco open and we need to close it, close sco first
+            ** then send indicators
+            */
+            else if (p_result->data.audio_handle == BTA_AG_HANDLE_NONE &&
+                     bta_ag_sco_is_open(p_scb) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_CONN;
+                bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            /* else send indicators now */
+            else
+            {
+                bta_ag_send_call_inds(p_scb, p_result->result);
+            }
+            break;
+
+        case BTA_AG_IN_CALL_HELD_RES:
+            /* stop ring timer */
+            bta_sys_stop_timer(&p_scb->act_timer);
+
+            bta_ag_send_call_inds(p_scb, p_result->result);
+
+            break;
+
+        case BTA_AG_OUT_CALL_ORIG_RES:
+            /* if sco open and we need to close it, close sco first
+            ** then send indicators; else send indicators now
+            */
+            if (p_result->data.audio_handle == BTA_AG_HANDLE_NONE &&
+                bta_ag_sco_is_open(p_scb) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_ORIG;
+                bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            else
+            {
+                bta_ag_send_call_inds(p_scb, p_result->result);
+                if (p_result->data.audio_handle == bta_ag_scb_to_idx(p_scb) &&
+                    !(p_scb->features & BTA_AG_FEAT_NOSCO))
+                {
+                    bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+            }
+            break;
+
+        case BTA_AG_OUT_CALL_ALERT_RES:
+            /* send indicators */
+            bta_ag_send_call_inds(p_scb, p_result->result);
+            if (p_result->data.audio_handle == bta_ag_scb_to_idx(p_scb) &&
+                !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            break;
+
+        case BTA_AG_OUT_CALL_CONN_RES:
+            /* send indicators */
+            bta_ag_send_call_inds(p_scb, p_result->result);
+
+            /* open or close sco */
+            if (!(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                if (p_result->data.audio_handle == bta_ag_scb_to_idx(p_scb))
+                {
+                    bta_ag_sco_open(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+                else if (p_result->data.audio_handle == BTA_AG_HANDLE_NONE)
+                {
+                    bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+                }
+            }
+            break;
+
+        case BTA_AG_CALL_CANCEL_RES:
+            /* send indicators */
+            bta_ag_send_call_inds(p_scb, p_result->result);
+            break;
+
+        case BTA_AG_END_CALL_RES:
+            /* stop ring timer */
+            bta_sys_stop_timer(&p_scb->act_timer);
+
+            /* if sco open, close sco then send indicator values */
+            if ((bta_ag_sco_is_open(p_scb) || bta_ag_sco_is_opening(p_scb)) && !(p_scb->features & BTA_AG_FEAT_NOSCO))
+            {
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_END;
+                bta_ag_sco_close(p_scb, (tBTA_AG_DATA *) p_result);
+            }
+            else if (p_scb->post_sco == BTA_AG_POST_SCO_CALL_END_INCALL)
+            {
+                /* sco closing for outgoing call because of incoming call */
+                /* Send only callsetup end indicator after sco close */
+                p_scb->post_sco = BTA_AG_POST_SCO_CALL_END;
+            }
+            else
+            {
+                bta_ag_send_call_inds(p_scb, p_result->result);
+
+                /* if av got suspended by this call, let it resume. */
+                bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+            }
+            break;
+
+        case BTA_AG_INBAND_RING_RES:
+            p_scb->inband_enabled = p_result->data.state;
+            APPL_TRACE_DEBUG1("inband_enabled set to %d", p_scb->inband_enabled);
+            bta_ag_send_result(p_scb, code, NULL, p_result->data.state);
+            break;
+
+        case BTA_AG_CIND_RES:
+            /* store local values */
+            p_scb->call_ind = p_result->data.str[0] - '0';
+            p_scb->callsetup_ind = p_result->data.str[2] - '0';
+            p_scb->service_ind = p_result->data.str[4] - '0';
+            p_scb->signal_ind = p_result->data.str[6] - '0';
+            p_scb->roam_ind = p_result->data.str[8] - '0';
+            p_scb->battchg_ind = p_result->data.str[10] - '0';
+            APPL_TRACE_DEBUG2("cind call:%d callsetup:%d", p_scb->call_ind, p_scb->callsetup_ind);
+
+            bta_ag_send_result(p_scb, code, p_result->data.str, 0);
+            bta_ag_send_ok(p_scb);
+            break;
+
+        case BTA_AG_BINP_RES:
+        case BTA_AG_CNUM_RES:
+        case BTA_AG_CLCC_RES:
+        case BTA_AG_COPS_RES:
+            if (p_result->data.ok_flag != BTA_AG_OK_ERROR)
+            {
+                if (p_result->data.str[0] != 0)
+                {
+                   bta_ag_send_result(p_scb, code, p_result->data.str, 0);
+                }
+
+                if (p_result->data.ok_flag == BTA_AG_OK_DONE)
+                    bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, p_result->data.errcode);
+            }
+            break;
+
+
+        case BTA_AG_UNAT_RES:
+            if (p_result->data.ok_flag != BTA_AG_OK_ERROR)
+            {
+                if (p_result->data.str[0] != 0)
+                {
+                    bta_ag_process_unat_res(p_result->data.str);
+                    APPL_TRACE_DEBUG1("BTA_AG_RES :%s",p_result->data.str);
+                    bta_ag_send_result(p_scb, code, p_result->data.str, 0);
+                }
+
+                if (p_result->data.ok_flag == BTA_AG_OK_DONE)
+                    bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, p_result->data.errcode);
+            }
+            break;
+
+        case BTA_AG_CALL_WAIT_RES:
+            if (p_scb->ccwa_enabled)
+            {
+                bta_ag_send_result(p_scb, code, p_result->data.str, 0);
+            }
+            bta_ag_send_call_inds(p_scb, p_result->result);
+            break;
+
+        case BTA_AG_IND_RES:
+            bta_ag_send_ind(p_scb, p_result->data.ind.id, p_result->data.ind.value, FALSE);
+            break;
+
+        case BTA_AG_BVRA_RES:
+            bta_ag_send_result(p_scb, code, NULL, p_result->data.state);
+            break;
+
+        case BTA_AG_BTRH_RES:
+            if (p_result->data.ok_flag != BTA_AG_OK_ERROR)
+            {
+                /* Don't respond to read if not in response & hold state */
+                if (p_result->data.num != BTA_AG_BTRH_NO_RESP)
+                {
+                    bta_ag_send_result(p_scb, code, NULL, p_result->data.num);
+                }
+
+                /* In case of a response to a read request we need to send OK */
+                if (p_result->data.ok_flag == BTA_AG_OK_DONE)
+                    bta_ag_send_ok(p_scb);
+            }
+            else
+            {
+                bta_ag_send_error(p_scb, p_result->data.errcode);
+            }
+            break;
+
+       default:
+            break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_result
+**
+** Description      Handle API result.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_result(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    if (p_scb->conn_service == BTA_AG_HSP)
+    {
+        bta_ag_hsp_result(p_scb, &p_data->api_result);
+    }
+    else
+    {
+        bta_ag_hfp_result(p_scb, &p_data->api_result);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_setcodec
+**
+** Description      Handle API SetCodec
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_setcodec(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_PEER_CODEC codec_type = p_data->api_setcodec.codec;
+
+    /* Check if the requested codec type is valid */
+    if((codec_type != BTA_AG_CODEC_NONE) &&
+       (codec_type != BTA_AG_CODEC_CVSD) &&
+       (codec_type != BTA_AG_CODEC_MSBC))
+    {
+        APPL_TRACE_ERROR1("bta_ag_setcodec error: unsupported codec type %d", codec_type);
+        return;
+    }
+
+    if((p_scb->peer_codecs & codec_type) || (codec_type == BTA_AG_CODEC_NONE) || (codec_type == BTA_AG_CODEC_CVSD))
+    {
+        p_scb->sco_codec = codec_type;
+        p_scb->codec_updated = TRUE;
+        APPL_TRACE_DEBUG1("bta_ag_setcodec: Updated codec type %d", codec_type);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_ag_setcodec error: unsupported codec type %d", codec_type);
+    }
+#endif
+}
+
+
+#if (BTM_WBS_INCLUDED == TRUE )
+/*******************************************************************************
+**
+** Function         bta_ag_send_bcs
+**
+** Description      Send +BCS AT command to peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_send_bcs(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16 codec_uuid;
+
+    if (p_scb->codec_fallback)
+    {
+        codec_uuid = UUID_CODEC_CVSD;
+    }
+    else
+    {
+        switch(p_scb->sco_codec)
+        {
+            case BTA_AG_CODEC_NONE:     codec_uuid = UUID_CODEC_CVSD;   break;
+            case BTA_AG_CODEC_CVSD:     codec_uuid = UUID_CODEC_CVSD;   break;
+            case BTA_AG_CODEC_MSBC:     codec_uuid = UUID_CODEC_MSBC;   break;
+            default:
+                APPL_TRACE_ERROR1("bta_ag_send_bcs: unknown codec %d, use CVSD", p_scb->sco_codec);
+                codec_uuid = UUID_CODEC_CVSD;
+                break;
+        }
+    }
+
+    /* send +BCS */
+    bta_ag_send_result(p_scb, BTA_AG_RES_BCS, NULL, codec_uuid);
+
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_send_ring
+**
+** Description      Send RING result code to peer.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_send_ring(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+#if defined(BTA_AG_MULTI_RESULT_INCLUDED) && (BTA_AG_MULTI_RESULT_INCLUDED == TRUE)
+    tBTA_AG_MULTI_RESULT_CB m_res_cb;
+
+    if (p_scb->conn_service == BTA_AG_HFP && p_scb->clip_enabled && p_scb->clip[0] != 0)
+    {
+        memset(&m_res_cb, NULL, sizeof(tBTA_AG_MULTI_RESULT_CB));
+
+        m_res_cb.num_result = 2;
+        AT_SET_RES_CB(m_res_cb.res_cb[0], BTA_AG_RES_RING, NULL, 0)
+        AT_SET_RES_CB(m_res_cb.res_cb[1], BTA_AG_RES_CLIP, p_scb->clip, 0)
+
+        bta_ag_send_multi_result(p_scb, &m_res_cb);
+    }
+    else
+    {
+        /* send RING ONLY */
+        bta_ag_send_result(p_scb, BTA_AG_RES_RING, NULL, 0);
+    }
+#else
+    /* send RING */
+    bta_ag_send_result(p_scb, BTA_AG_RES_RING, NULL, 0);
+
+    /* if HFP and clip enabled and clip data send CLIP */
+    if (p_scb->conn_service == BTA_AG_HFP && p_scb->clip_enabled && p_scb->clip[0] != 0)
+    {
+        bta_ag_send_result(p_scb, BTA_AG_RES_CLIP, p_scb->clip, 0);
+    }
+#endif
+
+    /* restart ring timer */
+    bta_sys_start_timer(&p_scb->act_timer, BTA_AG_RING_TOUT_EVT, BTA_AG_RING_TOUT);
+}
+
+
diff --git a/bta/ag/bta_ag_int.h b/bta/ag/bta_ag_int.h
new file mode 100644
index 0000000..b0d1b1d
--- /dev/null
+++ b/bta/ag/bta_ag_int.h
@@ -0,0 +1,423 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA audio gateway.
+ *
+ ******************************************************************************/
+#ifndef BTA_AG_INT_H
+#define BTA_AG_INT_H
+
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_ag_api.h"
+#include "bta_ag_at.h"
+
+/* Send RING & CLIP in one AT cmd */
+#ifndef BTA_AG_MULTI_RESULT_INCLUDED
+#define BTA_AG_MULTI_RESULT_INCLUDED      FALSE
+#endif
+
+/* Replace : in VGS and VGM for HSP */
+#ifndef BTA_HSP_RESULT_REPLACE_COLON
+#define BTA_HSP_RESULT_REPLACE_COLON      TRUE
+#endif
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+#define HFP_VERSION_1_1         0x0101
+#define HFP_VERSION_1_5         0x0105
+#define HFP_VERSION_1_6         0x0106
+
+#define HSP_VERSION_1_0         0x0100
+#define HSP_VERSION_1_2         0x0102
+
+/* Number of SCBs (AG service instances that can be registered) */
+#ifndef BTA_AG_NUM_SCB
+#define BTA_AG_NUM_SCB          2
+#endif
+
+/* Timer to wait for retry in case of collision */
+#ifndef BTA_AG_COLLISION_TIMER
+#define BTA_AG_COLLISION_TIMER  2000
+#endif
+
+/* RFCOMM MTU SIZE */
+#define BTA_AG_MTU              256
+
+/* Internal profile indexes */
+#define BTA_AG_HSP              0       /* index for HSP */
+#define BTA_AG_HFP              1       /* index for HFP */
+#define BTA_AG_NUM_IDX          2       /* number of profile indexes */
+
+/* profile role for connection */
+#define BTA_AG_ACP              0       /* accepted connection */
+#define BTA_AG_INT              1       /* initiating connection */
+
+/* feature mask that matches spec */
+#define BTA_AG_BSRF_FEAT_SPEC        (BTA_AG_FEAT_3WAY | BTA_AG_FEAT_ECNR    | \
+                                      BTA_AG_FEAT_VREC | BTA_AG_FEAT_INBAND  | \
+                                      BTA_AG_FEAT_VTAG | BTA_AG_FEAT_REJECT  | \
+                                      BTA_AG_FEAT_ECS  | BTA_AG_FEAT_ECC     | \
+                                      BTA_AG_FEAT_EXTERR | BTA_AG_FEAT_CODEC | \
+                                      BTA_AG_FEAT_VOIP)
+
+#define BTA_AG_SDP_FEAT_SPEC         (BTA_AG_FEAT_3WAY | BTA_AG_FEAT_ECNR    | \
+                                      BTA_AG_FEAT_VREC | BTA_AG_FEAT_INBAND  | \
+                                      BTA_AG_FEAT_VTAG)
+
+enum
+{
+    /* these events are handled by the state machine */
+    BTA_AG_API_REGISTER_EVT = BTA_SYS_EVT_START(BTA_ID_AG),
+    BTA_AG_API_DEREGISTER_EVT,
+    BTA_AG_API_OPEN_EVT,
+    BTA_AG_API_CLOSE_EVT,
+    BTA_AG_API_AUDIO_OPEN_EVT,
+    BTA_AG_API_AUDIO_CLOSE_EVT,
+    BTA_AG_API_RESULT_EVT,
+    BTA_AG_API_SETCODEC_EVT,
+    BTA_AG_RFC_OPEN_EVT,
+    BTA_AG_RFC_CLOSE_EVT,
+    BTA_AG_RFC_SRV_CLOSE_EVT,
+    BTA_AG_RFC_DATA_EVT,
+    BTA_AG_SCO_OPEN_EVT,
+    BTA_AG_SCO_CLOSE_EVT,
+    BTA_AG_DISC_ACP_RES_EVT,
+    BTA_AG_DISC_INT_RES_EVT,
+    BTA_AG_DISC_OK_EVT,
+    BTA_AG_DISC_FAIL_EVT,
+    BTA_AG_CI_RX_WRITE_EVT,
+    BTA_AG_RING_TOUT_EVT,
+    BTA_AG_SVC_TOUT_EVT,
+    BTA_AG_CI_SCO_DATA_EVT,
+    BTA_AG_CI_SLC_READY_EVT,
+    BTA_AG_MAX_EVT,
+
+    /* these events are handled outside of the state machine */
+    BTA_AG_API_ENABLE_EVT,
+    BTA_AG_API_DISABLE_EVT
+};
+
+/* Actions to perform after a SCO event */
+enum
+{
+    BTA_AG_POST_SCO_NONE,       /* no action */
+    BTA_AG_POST_SCO_CLOSE_RFC,  /* close RFCOMM channel after SCO closes */
+    BTA_AG_POST_SCO_RING,       /* send RING result code after SCO opens */
+    BTA_AG_POST_SCO_CALL_CONN,  /* send call indicators after SCO opens/closes */
+    BTA_AG_POST_SCO_CALL_ORIG,  /* send call indicators after SCO closes */
+    BTA_AG_POST_SCO_CALL_END,   /* send call indicators after SCO closes */
+    BTA_AG_POST_SCO_CALL_END_INCALL   /* send call indicators for end call & incoming call after SCO closes */
+};
+
+/* sco states */
+enum
+{
+    BTA_AG_SCO_SHUTDOWN_ST,     /* no sco listening, all sco connections closed */
+    BTA_AG_SCO_LISTEN_ST,       /* sco listening */
+#if (BTM_WBS_INCLUDED == TRUE )
+    BTA_AG_SCO_CODEC_ST,        /* sco codec negotiation */
+#endif
+    BTA_AG_SCO_OPENING_ST,      /* sco connection opening */
+    BTA_AG_SCO_OPEN_CL_ST,      /* opening sco connection being closed */
+    BTA_AG_SCO_OPEN_XFER_ST,    /* opening sco connection being transferred */
+    BTA_AG_SCO_OPEN_ST,         /* sco open */
+    BTA_AG_SCO_CLOSING_ST,      /* sco closing */
+    BTA_AG_SCO_CLOSE_OP_ST,     /* closing sco being opened */
+    BTA_AG_SCO_CLOSE_XFER_ST,   /* closing sco being transferred */
+    BTA_AG_SCO_SHUTTING_ST      /* sco shutting down */
+};
+
+/*****************************************************************************
+**  Data types
+*****************************************************************************/
+
+/* data type for BTA_AG_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_AG_PARSE_MODE  parse_mode;
+    tBTA_AG_CBACK      *p_cback;
+} tBTA_AG_API_ENABLE;
+
+/* data type for BTA_AG_API_REGISTER_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    char                p_name[2][BTA_SERVICE_NAME_LEN+1];
+    tBTA_SERVICE_MASK   services;
+    tBTA_SEC            sec_mask;
+    tBTA_AG_FEAT        features;
+    UINT8               app_id;
+} tBTA_AG_API_REGISTER;
+
+/* data type for BTA_AG_API_OPEN_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+    tBTA_SERVICE_MASK   services;
+    tBTA_SEC            sec_mask;
+} tBTA_AG_API_OPEN;
+
+/* data type for BTA_AG_API_RESULT_EVT */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_AG_RES       result;
+    tBTA_AG_RES_DATA  data;
+} tBTA_AG_API_RESULT;
+
+/* data type for BTA_AG_API_SETCODEC_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_AG_PEER_CODEC  codec;
+} tBTA_AG_API_SETCODEC;
+
+/* data type for BTA_AG_DISC_RESULT_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          status;
+} tBTA_AG_DISC_RESULT;
+
+/* data type for RFCOMM events */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          port_handle;
+} tBTA_AG_RFC;
+
+/* data type for BTA_AG_CI_RX_WRITE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+//    char            p_data[BTA_AG_MTU+1];
+} tBTA_AG_CI_RX_WRITE;
+
+/* union of all event datatypes */
+typedef union
+{
+    BT_HDR                  hdr;
+    tBTA_AG_API_ENABLE      api_enable;
+    tBTA_AG_API_REGISTER    api_register;
+    tBTA_AG_API_OPEN        api_open;
+    tBTA_AG_API_RESULT      api_result;
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_API_SETCODEC    api_setcodec;
+#endif
+    tBTA_AG_DISC_RESULT     disc_result;
+    tBTA_AG_RFC             rfc;
+    tBTA_AG_CI_RX_WRITE     ci_rx_write;
+} tBTA_AG_DATA;
+
+/* type for each profile */
+typedef struct
+{
+    UINT32          sdp_handle;
+    UINT8           scn;
+} tBTA_AG_PROFILE;
+
+/* type for each service control block */
+typedef struct
+{
+    char                clip[BTA_AG_AT_MAX_LEN+1]; /* number string used for CLIP */
+    UINT16              serv_handle[BTA_AG_NUM_IDX]; /* RFCOMM server handles */
+    tBTA_AG_AT_CB       at_cb;          /* AT command interpreter */
+    TIMER_LIST_ENT      act_timer;     /* ring timer */
+    BD_ADDR             peer_addr;      /* peer bd address */
+    tSDP_DISCOVERY_DB   *p_disc_db;     /* pointer to discovery database */
+    tBTA_SERVICE_MASK   reg_services;   /* services specified in register API */
+    tBTA_SERVICE_MASK   open_services;  /* services specified in open API */
+    UINT16              conn_handle;    /* RFCOMM handle of connected service */
+    tBTA_SEC            serv_sec_mask;  /* server security mask */
+    tBTA_SEC            cli_sec_mask;   /* client security mask */
+    tBTA_AG_FEAT        features;       /* features registered by application */
+    tBTA_AG_PEER_FEAT   peer_features;  /* peer device features */
+    UINT16              peer_version;   /* profile version of peer device */
+    UINT16              hsp_version;    /* HSP profile version */
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_PEER_CODEC  peer_codecs;    /* codecs for eSCO supported by the peer */
+    tBTA_AG_PEER_CODEC  sco_codec;      /* codec to be used for eSCO connection */
+    tBTA_AG_PEER_CODEC  inuse_codec;    /* codec being used for the current SCO connection */
+    BOOLEAN             codec_updated;  /* set to TRUE whenever the app updates codec type */
+    BOOLEAN             codec_fallback; /* If sco nego fails for mSBC, fallback to CVSD */
+    TIMER_LIST_ENT      cn_timer;       /* codec negotiation timer */
+#endif
+    UINT16              sco_idx;        /* SCO handle */
+    BOOLEAN             in_use;         /* scb in use */
+    BOOLEAN             dealloc;        /* TRUE if service shutting down */
+    BOOLEAN             clip_enabled;   /* set to TRUE if HF enables CLIP reporting */
+    BOOLEAN             ccwa_enabled;   /* set to TRUE if HF enables CCWA reporting */
+    BOOLEAN             cmer_enabled;   /* set to TRUE if HF enables CMER reporting */
+    BOOLEAN             cmee_enabled;   /* set to TRUE if HF enables CME ERROR reporting */
+    BOOLEAN             inband_enabled; /* set to TRUE if inband ring enabled */
+    BOOLEAN             svc_conn;       /* set to TRUE when service level connection up */
+    TIMER_LIST_ENT      colli_timer;    /* Collision timer */
+    BOOLEAN             colli_tmr_on;   /* TRUE if collision timer is active */
+    UINT8               state;          /* state machine state */
+    UINT8               conn_service;   /* connected service */
+    UINT8               peer_scn;       /* peer scn */
+    UINT8               app_id;         /* application id */
+    UINT8               role;           /* initiator/acceptor role */
+    UINT8               post_sco;       /* action to perform after sco event */
+    UINT8               call_ind;       /* CIEV call indicator value */
+    UINT8               callsetup_ind;  /* CIEV callsetup indicator value */
+    UINT8               service_ind;    /* CIEV service indicator value */
+    UINT8               signal_ind;     /* CIEV signal indicator value */
+    UINT8               roam_ind;       /* CIEV roam indicator value */
+    UINT8               battchg_ind;    /* CIEV battery charge indicator value */
+    UINT8               callheld_ind;   /* CIEV call held indicator value */
+    BOOLEAN             retry_with_sco_only; /* indicator to try with SCO only when eSCO fails */
+    UINT32              bia_masked_out; /* indicators HF does not want us to send */
+} tBTA_AG_SCB;
+
+/* type for sco data */
+typedef struct
+{
+    tBTM_ESCO_CONN_REQ_EVT_DATA  conn_data;     /* SCO data for pending conn request */
+    tBTA_AG_SCB                 *p_curr_scb;    /* SCB associated with SCO connection */
+    tBTA_AG_SCB                 *p_xfer_scb;    /* SCB associated with SCO transfer */
+    UINT16                      cur_idx;        /* SCO handle */
+    UINT8                       state;          /* SCO state variable */
+    BOOLEAN                     param_updated;  /* if params were updated to non-default */
+    tBTM_ESCO_PARAMS            params;         /* ESCO parameters */
+} tBTA_AG_SCO_CB;
+
+
+/* type for AG control block */
+typedef struct
+{
+    tBTA_AG_SCB         scb[BTA_AG_NUM_SCB];        /* service control blocks */
+    tBTA_AG_PROFILE     profile[BTA_AG_NUM_IDX];    /* profile-specific data */
+    tBTA_AG_SCO_CB      sco;                        /* SCO data */
+    tBTA_AG_CBACK       *p_cback;                   /* application callback */
+    tBTA_AG_PARSE_MODE  parse_mode;                 /* parse/pass-through mode */
+} tBTA_AG_CB;
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* constant lookup tables */
+extern const UINT16 bta_ag_uuid[BTA_AG_NUM_IDX];
+extern const UINT8 bta_ag_sec_id[BTA_AG_NUM_IDX];
+extern const tBTA_AG_AT_CMD *bta_ag_at_tbl[BTA_AG_NUM_IDX];
+
+/* control block declaration */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_AG_CB bta_ag_cb;
+#else
+extern tBTA_AG_CB *bta_ag_cb_ptr;
+#define bta_ag_cb (*bta_ag_cb_ptr)
+#endif
+
+/* config struct */
+extern tBTA_AG_CFG *p_bta_ag_cfg;
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+
+/* main functions */
+extern void bta_ag_scb_dealloc(tBTA_AG_SCB *p_scb);
+extern UINT16 bta_ag_scb_to_idx(tBTA_AG_SCB *p_scb);
+extern tBTA_AG_SCB *bta_ag_scb_by_idx(UINT16 idx);
+extern UINT8 bta_ag_service_to_idx(tBTA_SERVICE_MASK services);
+extern UINT16 bta_ag_idx_by_bdaddr(BD_ADDR peer_addr);
+extern BOOLEAN bta_ag_other_scb_open(tBTA_AG_SCB *p_curr_scb);
+extern tBTA_AG_SCB *bta_ag_get_other_idle_scb (tBTA_AG_SCB *p_curr_scb);
+extern void bta_ag_sm_execute(tBTA_AG_SCB *p_scb, UINT16 event, tBTA_AG_DATA *p_data);
+extern BOOLEAN bta_ag_hdl_event(BT_HDR *p_msg);
+extern void bta_ag_collision_cback (tBTA_SYS_CONN_STATUS status, UINT8 id,
+                                    UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_ag_resume_open (tBTA_AG_SCB *p_scb);
+
+/* SDP functions */
+extern BOOLEAN bta_ag_add_record(UINT16 service_uuid, char *p_service_name, UINT8 scn,
+                                 tBTA_AG_FEAT features, UINT32 sdp_handle);
+extern void bta_ag_create_records(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_del_records(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern BOOLEAN bta_ag_sdp_find_attr(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK service);
+extern void bta_ag_do_disc(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK service);
+extern void bta_ag_free_db(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+
+/* RFCOMM functions */
+extern void bta_ag_start_servers(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK services);
+extern void bta_ag_close_servers(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK services);
+extern BOOLEAN bta_ag_is_server_closed (tBTA_AG_SCB *p_scb);
+extern void bta_ag_rfc_do_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_do_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+
+/* SCO functions */
+extern BOOLEAN bta_ag_sco_is_open(tBTA_AG_SCB *p_scb);
+extern BOOLEAN bta_ag_sco_is_opening(tBTA_AG_SCB *p_scb);
+extern void bta_ag_sco_conn_rsp(tBTA_AG_SCB *p_scb, tBTM_ESCO_CONN_REQ_EVT_DATA *p_data);
+
+/* AT command functions */
+extern void bta_ag_at_hsp_cback(tBTA_AG_SCB *p_scb, UINT16 cmd, UINT8 arg_type,
+                                char *p_arg, INT16 int_arg);
+extern void bta_ag_at_hfp_cback(tBTA_AG_SCB *p_scb, UINT16 cmd, UINT8 arg_type,
+                                char *p_arg, INT16 int_arg);
+extern void bta_ag_at_err_cback(tBTA_AG_SCB *p_scb, BOOLEAN unknown, char *p_arg);
+extern BOOLEAN bta_ag_inband_enabled(tBTA_AG_SCB *p_scb);
+extern void bta_ag_send_call_inds(tBTA_AG_SCB *p_scb, tBTA_AG_RES result);
+
+/* Action functions */
+extern void bta_ag_register(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_deregister(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_start_dereg(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_start_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_start_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_disc_int_res(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_disc_acp_res(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_disc_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_open_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_fail(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_acp_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rfc_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_sco_listen(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+#if (BTM_WBS_INCLUDED == TRUE )
+extern void bta_ag_sco_codec_nego(tBTA_AG_SCB *p_scb, BOOLEAN result);
+extern void bta_ag_codec_negotiate (tBTA_AG_SCB *p_scb);
+#endif
+extern void bta_ag_sco_shutdown(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_sco_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_sco_conn_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_post_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_post_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_svc_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_result(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_setcodec(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+#if (BTM_WBS_INCLUDED == TRUE )
+extern void bta_ag_send_bcs(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+#endif
+extern void bta_ag_send_ring(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_ci_sco_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_set_esco_param(BOOLEAN set_reset, tBTM_ESCO_PARAMS *param);
+extern void bta_ag_ci_rx_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+extern void bta_ag_rcvd_slc_ready(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+#endif /* BTA_AG_INT_H */
diff --git a/bta/ag/bta_ag_main.c b/bta/ag/bta_ag_main.c
new file mode 100644
index 0000000..9b28067
--- /dev/null
+++ b/bta/ag/bta_ag_main.c
@@ -0,0 +1,1012 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the main implementation file for the BTA audio gateway.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_ag_co.h"
+#include "bta_ag_int.h"
+#include "bd.h"
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+#ifndef BTA_AG_DEBUG
+#define BTA_AG_DEBUG FALSE
+#endif
+
+#if BTA_AG_DEBUG == TRUE
+static char *bta_ag_evt_str(UINT16 event, tBTA_AG_RES result);
+static char *bta_ag_state_str(UINT8 state);
+#endif
+
+/* state machine states */
+enum
+{
+    BTA_AG_INIT_ST,
+    BTA_AG_OPENING_ST,
+    BTA_AG_OPEN_ST,
+    BTA_AG_CLOSING_ST
+};
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_AG_REGISTER,
+    BTA_AG_DEREGISTER,
+    BTA_AG_START_OPEN,
+    BTA_AG_RFC_DO_OPEN,
+    BTA_AG_RFC_DO_CLOSE,
+    BTA_AG_START_DEREG,
+    BTA_AG_START_CLOSE,
+    BTA_AG_RFC_OPEN,
+    BTA_AG_OPEN_FAIL,
+    BTA_AG_RFC_ACP_OPEN,
+    BTA_AG_RFC_CLOSE,
+    BTA_AG_RFC_FAIL,
+    BTA_AG_RFC_DATA,
+    BTA_AG_DISC_INT_RES,
+    BTA_AG_DISC_FAIL,
+    BTA_AG_DISC_ACP_RES,
+    BTA_AG_FREE_DB,
+    BTA_AG_SCO_CONN_OPEN,
+    BTA_AG_SCO_CONN_CLOSE,
+    BTA_AG_SCO_LISTEN,
+    BTA_AG_SCO_OPEN,
+    BTA_AG_SCO_CLOSE,
+    BTA_AG_SCO_SHUTDOWN,
+    BTA_AG_POST_SCO_OPEN,
+    BTA_AG_POST_SCO_CLOSE,
+    BTA_AG_SVC_CONN_OPEN,
+    BTA_AG_RESULT,
+    BTA_AG_SETCODEC,
+    BTA_AG_SEND_RING,
+    BTA_AG_CI_SCO_DATA,
+    BTA_AG_CI_RX_DATA,
+    BTA_AG_RCVD_SLC_READY,
+    BTA_AG_NUM_ACTIONS
+};
+
+#define BTA_AG_IGNORE       BTA_AG_NUM_ACTIONS
+
+/* type for action functions */
+typedef void (*tBTA_AG_ACTION)(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data);
+
+/* action functions */
+const tBTA_AG_ACTION bta_ag_action[] =
+{
+    bta_ag_register,
+    bta_ag_deregister,
+    bta_ag_start_open,
+    bta_ag_rfc_do_open,
+    bta_ag_rfc_do_close,
+    bta_ag_start_dereg,
+    bta_ag_start_close,
+    bta_ag_rfc_open,
+    bta_ag_open_fail,
+    bta_ag_rfc_acp_open,
+    bta_ag_rfc_close,
+    bta_ag_rfc_fail,
+    bta_ag_rfc_data,
+    bta_ag_disc_int_res,
+    bta_ag_disc_fail,
+    bta_ag_disc_acp_res,
+    bta_ag_free_db,
+    bta_ag_sco_conn_open,
+    bta_ag_sco_conn_close,
+    bta_ag_sco_listen,
+    bta_ag_sco_open,
+    bta_ag_sco_close,
+    bta_ag_sco_shutdown,
+    bta_ag_post_sco_open,
+    bta_ag_post_sco_close,
+    bta_ag_svc_conn_open,
+    bta_ag_result,
+    bta_ag_setcodec,
+    bta_ag_send_ring,
+    bta_ag_ci_sco_data,
+    bta_ag_ci_rx_data,
+    bta_ag_rcvd_slc_ready
+};
+
+/* state table information */
+#define BTA_AG_ACTIONS              2       /* number of actions */
+#define BTA_AG_NEXT_STATE           2       /* position of next state */
+#define BTA_AG_NUM_COLS             3       /* number of columns in state tables */
+
+/* state table for init state */
+const UINT8 bta_ag_st_init[][BTA_AG_NUM_COLS] =
+{
+/* Event                    Action 1                Action 2                Next state */
+/* API_REGISTER_EVT */      {BTA_AG_REGISTER,       BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_DEREGISTER_EVT */    {BTA_AG_DEREGISTER,     BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_OPEN_EVT */          {BTA_AG_START_OPEN,     BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_CLOSE_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_AUDIO_OPEN_EVT */    {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_AUDIO_CLOSE_EVT */   {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_RESULT_EVT */        {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* API_SETCODEC_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_OPEN_EVT */          {BTA_AG_RFC_ACP_OPEN,   BTA_AG_SCO_LISTEN,      BTA_AG_OPEN_ST},
+/* RFC_CLOSE_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_SRV_CLOSE_EVT */     {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_DATA_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* SCO_OPEN_EVT */          {BTA_AG_SCO_CONN_OPEN,  BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* SCO_CLOSE_EVT */         {BTA_AG_SCO_CONN_CLOSE, BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* DISC_ACP_RES_EVT */      {BTA_AG_FREE_DB,        BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* DISC_INT_RES_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* DISC_OK_EVT */           {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* DISC_FAIL_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* CI_RX_WRITE_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RING_TOUT_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* SVC_TOUT_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* CI_SCO_DATA_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* CI_SLC_READY_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_INIT_ST}
+};
+
+/* state table for opening state */
+const UINT8 bta_ag_st_opening[][BTA_AG_NUM_COLS] =
+{
+/* Event                    Action 1                Action 2                Next state */
+/* API_REGISTER_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_DEREGISTER_EVT */    {BTA_AG_RFC_DO_CLOSE,   BTA_AG_START_DEREG,     BTA_AG_CLOSING_ST},
+/* API_OPEN_EVT */          {BTA_AG_OPEN_FAIL,      BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_CLOSE_EVT */         {BTA_AG_RFC_DO_CLOSE,   BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_AUDIO_OPEN_EVT */    {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_AUDIO_CLOSE_EVT */   {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_RESULT_EVT */        {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* API_SETCODEC_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* RFC_OPEN_EVT */          {BTA_AG_RFC_OPEN,       BTA_AG_SCO_LISTEN,      BTA_AG_OPEN_ST},
+/* RFC_CLOSE_EVT */         {BTA_AG_RFC_FAIL,       BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_SRV_CLOSE_EVT */     {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* RFC_DATA_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* SCO_OPEN_EVT */          {BTA_AG_SCO_CONN_OPEN,  BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* SCO_CLOSE_EVT */         {BTA_AG_SCO_CONN_CLOSE, BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* DISC_ACP_RES_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* DISC_INT_RES_EVT */      {BTA_AG_DISC_INT_RES,   BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* DISC_OK_EVT */           {BTA_AG_RFC_DO_OPEN,    BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* DISC_FAIL_EVT */         {BTA_AG_DISC_FAIL,      BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* CI_RX_WRITE_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* RING_TOUT_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* SVC_TOUT_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* CI_SCO_DATA_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST},
+/* CI_SLC_READY_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPENING_ST}
+};
+
+/* state table for open state */
+const UINT8 bta_ag_st_open[][BTA_AG_NUM_COLS] =
+{
+/* Event                    Action 1                Action 2                Next state */
+/* API_REGISTER_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* API_DEREGISTER_EVT */    {BTA_AG_START_CLOSE,    BTA_AG_START_DEREG,     BTA_AG_CLOSING_ST},
+/* API_OPEN_EVT */          {BTA_AG_OPEN_FAIL,      BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* API_CLOSE_EVT */         {BTA_AG_START_CLOSE,    BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_AUDIO_OPEN_EVT */    {BTA_AG_SCO_OPEN,       BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* API_AUDIO_CLOSE_EVT */   {BTA_AG_SCO_CLOSE,      BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* API_RESULT_EVT */        {BTA_AG_RESULT,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* API_SETCODEC_EVT */      {BTA_AG_SETCODEC,       BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* RFC_OPEN_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* RFC_CLOSE_EVT */         {BTA_AG_RFC_CLOSE,      BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_SRV_CLOSE_EVT */     {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* RFC_DATA_EVT */          {BTA_AG_RFC_DATA,       BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* SCO_OPEN_EVT */          {BTA_AG_SCO_CONN_OPEN,  BTA_AG_POST_SCO_OPEN,   BTA_AG_OPEN_ST},
+/* SCO_CLOSE_EVT */         {BTA_AG_SCO_CONN_CLOSE, BTA_AG_POST_SCO_CLOSE,  BTA_AG_OPEN_ST},
+/* DISC_ACP_RES_EVT */      {BTA_AG_DISC_ACP_RES,   BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* DISC_INT_RES_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* DISC_OK_EVT */           {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* DISC_FAIL_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* CI_RX_WRITE_EVT */       {BTA_AG_CI_RX_DATA,     BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* RING_TOUT_EVT */         {BTA_AG_SEND_RING,      BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* SVC_TOUT_EVT */          {BTA_AG_START_CLOSE,    BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* CI_SCO_DATA_EVT */       {BTA_AG_CI_SCO_DATA,    BTA_AG_IGNORE,          BTA_AG_OPEN_ST},
+/* CI_SLC_READY_EVT */      {BTA_AG_RCVD_SLC_READY, BTA_AG_IGNORE,          BTA_AG_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 bta_ag_st_closing[][BTA_AG_NUM_COLS] =
+{
+/* Event                    Action 1                Action 2                Next state */
+/* API_REGISTER_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_DEREGISTER_EVT */    {BTA_AG_START_DEREG,    BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_OPEN_EVT */          {BTA_AG_OPEN_FAIL,      BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_CLOSE_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_AUDIO_OPEN_EVT */    {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_AUDIO_CLOSE_EVT */   {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_RESULT_EVT */        {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* API_SETCODEC_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* RFC_OPEN_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* RFC_CLOSE_EVT */         {BTA_AG_RFC_CLOSE,      BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* RFC_SRV_CLOSE_EVT */     {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* RFC_DATA_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* SCO_OPEN_EVT */          {BTA_AG_SCO_CONN_OPEN,  BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* SCO_CLOSE_EVT */         {BTA_AG_SCO_CONN_CLOSE, BTA_AG_POST_SCO_CLOSE,  BTA_AG_CLOSING_ST},
+/* DISC_ACP_RES_EVT */      {BTA_AG_FREE_DB,        BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* DISC_INT_RES_EVT */      {BTA_AG_FREE_DB,        BTA_AG_IGNORE,          BTA_AG_INIT_ST},
+/* DISC_OK_EVT */           {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* DISC_FAIL_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* CI_RX_WRITE_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* RING_TOUT_EVT */         {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* SVC_TOUT_EVT */          {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* CI_SCO_DATA_EVT */       {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST},
+/* CI_SLC_READY_EVT */      {BTA_AG_IGNORE,         BTA_AG_IGNORE,          BTA_AG_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_AG_ST_TBL)[BTA_AG_NUM_COLS];
+
+/* state table */
+const tBTA_AG_ST_TBL bta_ag_st_tbl[] =
+{
+    bta_ag_st_init,
+    bta_ag_st_opening,
+    bta_ag_st_open,
+    bta_ag_st_closing
+};
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+
+/* AG control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_AG_CB  bta_ag_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_timer_cback
+**
+** Description      AG timer callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_timer_cback(void *p)
+{
+    BT_HDR          *p_buf;
+    TIMER_LIST_ENT  *p_tle = (TIMER_LIST_ENT *) p;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = p_tle->event;
+        p_buf->layer_specific = bta_ag_scb_to_idx((tBTA_AG_SCB *) p_tle->param);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_scb_alloc
+**
+** Description      Allocate an AG service control block.
+**
+**
+** Returns          pointer to the scb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+static tBTA_AG_SCB *bta_ag_scb_alloc(void)
+{
+    tBTA_AG_SCB     *p_scb = &bta_ag_cb.scb[0];
+    int             i;
+
+    for (i = 0; i < BTA_AG_NUM_SCB; i++, p_scb++)
+    {
+        if (!p_scb->in_use)
+        {
+            /* initialize variables */
+            p_scb->in_use = TRUE;
+            p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+
+            /* set up timers */
+            p_scb->act_timer.param = (UINT32) p_scb;
+            p_scb->act_timer.p_cback = bta_ag_timer_cback;
+
+            APPL_TRACE_DEBUG1("bta_ag_scb_alloc %d", bta_ag_scb_to_idx(p_scb));
+            break;
+        }
+    }
+
+    if (i == BTA_AG_NUM_SCB)
+    {
+        /* out of scbs */
+        p_scb = NULL;
+        APPL_TRACE_WARNING0("Out of ag scbs");
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_scb_dealloc
+**
+** Description      Deallocate a service control block.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_scb_dealloc(tBTA_AG_SCB *p_scb)
+{
+    UINT8   idx;
+    BOOLEAN allocated = FALSE;
+
+    APPL_TRACE_DEBUG1("bta_ag_scb_dealloc %d", bta_ag_scb_to_idx(p_scb));
+
+    /* stop timers */
+    bta_sys_stop_timer(&p_scb->act_timer);
+#if (BTM_WBS_INCLUDED == TRUE)
+    bta_sys_stop_timer(&p_scb->cn_timer);
+#endif
+
+    /* initialize control block */
+    memset(p_scb, 0, sizeof(tBTA_AG_SCB));
+    p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+
+    /* If all scbs are deallocated, callback with disable event */
+    if (!bta_sys_is_register (BTA_ID_AG))
+    {
+        for (idx = 0; idx < BTA_AG_NUM_SCB; idx++)
+        {
+            if (bta_ag_cb.scb[idx].in_use)
+            {
+                allocated = TRUE;
+                break;
+            }
+        }
+
+        if (!allocated)
+        {
+            (*bta_ag_cb.p_cback)(BTA_AG_DISABLE_EVT, NULL);
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_scb_to_idx
+**
+** Description      Given a pointer to an scb, return its index.
+**
+**
+** Returns          Index of scb.
+**
+*******************************************************************************/
+UINT16 bta_ag_scb_to_idx(tBTA_AG_SCB *p_scb)
+{
+    /* use array arithmetic to determine index */
+    return ((UINT16) (p_scb - bta_ag_cb.scb)) + 1;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_scb_by_idx
+**
+** Description      Given an scb index return pointer to scb.
+**
+**
+** Returns          Pointer to scb or NULL if not allocated.
+**
+*******************************************************************************/
+tBTA_AG_SCB *bta_ag_scb_by_idx(UINT16 idx)
+{
+    tBTA_AG_SCB     *p_scb;
+
+    /* verify index */
+    if (idx > 0 && idx <= BTA_AG_NUM_SCB)
+    {
+        p_scb = &bta_ag_cb.scb[idx - 1];
+        if (!p_scb->in_use)
+        {
+            p_scb = NULL;
+            APPL_TRACE_WARNING1("ag scb idx %d not allocated", idx);
+        }
+    }
+    else
+    {
+        p_scb = NULL;
+        APPL_TRACE_DEBUG1("ag scb idx %d out of range", idx);
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_service_to_idx
+**
+** Description      Given a BTA service mask convert to profile index.
+**
+**
+** Returns          Profile ndex of scb.
+**
+*******************************************************************************/
+UINT8 bta_ag_service_to_idx(tBTA_SERVICE_MASK services)
+{
+    if (services & BTA_HFP_SERVICE_MASK)
+    {
+        return BTA_AG_HFP;
+    }
+    else
+    {
+        return BTA_AG_HSP;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_idx_by_bdaddr
+**
+** Description      Find SCB associated with peer BD address.
+**
+**
+** Returns          Index of SCB or zero if none found.
+**
+*******************************************************************************/
+UINT16 bta_ag_idx_by_bdaddr(BD_ADDR peer_addr)
+{
+    tBTA_AG_SCB     *p_scb = &bta_ag_cb.scb[0];
+    UINT16          i;
+
+    if (peer_addr != NULL)
+    {
+        for (i = 0; i < BTA_AG_NUM_SCB; i++, p_scb++)
+        {
+            if (p_scb->in_use && !bdcmp(peer_addr, p_scb->peer_addr))
+            {
+                return (i + 1);
+            }
+        }
+    }
+
+    /* no scb found */
+    APPL_TRACE_WARNING0("No ag scb for peer addr");
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_other_scb_open
+**
+** Description      Check whether any other scb is in open state.
+**
+**
+** Returns          TRUE if another scb is in open state, FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_ag_other_scb_open(tBTA_AG_SCB *p_curr_scb)
+{
+    tBTA_AG_SCB     *p_scb = &bta_ag_cb.scb[0];
+    int             i;
+
+    for (i = 0; i < BTA_AG_NUM_SCB; i++, p_scb++)
+    {
+        if (p_scb->in_use && p_scb != p_curr_scb && p_scb->state == BTA_AG_OPEN_ST)
+        {
+            return TRUE;
+        }
+    }
+
+    /* no other scb found */
+    APPL_TRACE_DEBUG0("No other ag scb open");
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_get_other_idle_scb
+**
+** Description      Return other scb if it is in INIT st.
+**
+**
+** Returns          Pointer to other scb if INIT st, NULL otherwise.
+**
+*******************************************************************************/
+tBTA_AG_SCB *bta_ag_get_other_idle_scb (tBTA_AG_SCB *p_curr_scb)
+{
+    tBTA_AG_SCB     *p_scb = &bta_ag_cb.scb[0];
+    UINT8   xx;
+
+    for (xx = 0; xx < BTA_AG_NUM_SCB; xx++, p_scb++)
+    {
+        if (p_scb->in_use && (p_scb != p_curr_scb) && (p_scb->state == BTA_AG_INIT_ST))
+        {
+            return p_scb;
+        }
+    }
+
+    /* no other scb found */
+    APPL_TRACE_DEBUG0("bta_ag_get_other_idle_scb: No idle AG scb");
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_colli_timer_cback
+**
+** Description      AG connection collision timer callback
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_colli_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+    tBTA_AG_SCB *p_scb;
+
+    APPL_TRACE_DEBUG0 ("bta_ag_colli_timer_cback");
+
+    if (p_tle)
+    {
+        p_scb = (tBTA_AG_SCB *)p_tle->param;
+
+        if (p_scb)
+        {
+            p_scb->colli_tmr_on = FALSE;
+
+            /* If the peer haven't opened AG connection     */
+            /* we will restart opening process.             */
+            bta_ag_resume_open (p_scb);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_collision_cback
+**
+** Description      Get notified about collision.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_collision_cback (tBTA_SYS_CONN_STATUS status, UINT8 id,
+                                    UINT8 app_id, BD_ADDR peer_addr)
+{
+    UINT16  handle;
+    tBTA_AG_SCB *p_scb;
+
+    /* Check if we have opening scb for the peer device. */
+    handle = bta_ag_idx_by_bdaddr (peer_addr);
+    p_scb = bta_ag_scb_by_idx (handle);
+
+    if (p_scb && (p_scb->state == BTA_AG_OPENING_ST))
+    {
+        if (id == BTA_ID_SYS)   /* ACL collision */
+        {
+            APPL_TRACE_WARNING0 ("AG found collision (ACL) ...");
+        }
+        else if (id == BTA_ID_AG)   /* RFCOMM collision */
+        {
+            APPL_TRACE_WARNING0 ("AG found collision (RFCOMM) ...");
+        }
+        else
+        {
+            APPL_TRACE_WARNING0 ("AG found collision (\?\?\?) ...");
+        }
+
+        p_scb->state = BTA_AG_INIT_ST;
+
+        /* Cancel SDP if it had been started. */
+        if(p_scb->p_disc_db)
+        {
+            (void)SDP_CancelServiceSearch (p_scb->p_disc_db);
+            bta_ag_free_db(p_scb, NULL);
+        }
+
+        /* reopen registered servers */
+        /* Collision may be detected before or after we close servers. */
+        if (bta_ag_is_server_closed (p_scb))
+            bta_ag_start_servers(p_scb, p_scb->reg_services);
+
+        /* Start timer to han */
+        p_scb->colli_timer.p_cback = (TIMER_CBACK*)&bta_ag_colli_timer_cback;
+        p_scb->colli_timer.param = (INT32)p_scb;
+        bta_sys_start_timer(&p_scb->colli_timer, 0, BTA_AG_COLLISION_TIMER);
+        p_scb->colli_tmr_on = TRUE;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_resume_open
+**
+** Description      Resume opening process.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_resume_open (tBTA_AG_SCB *p_scb)
+{
+    if (p_scb)
+    {
+        APPL_TRACE_DEBUG1 ("bta_ag_resume_open, Handle(%d)", bta_ag_scb_to_idx(p_scb));
+
+        /* resume opening process.  */
+        if (p_scb->state == BTA_AG_INIT_ST)
+        {
+            p_scb->state = BTA_AG_OPENING_ST;
+            bta_ag_start_open (p_scb, NULL);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0 ("bta_ag_resume_open, Null p_scb");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_api_enable
+**
+** Description      Handle an API enable event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_api_enable(tBTA_AG_DATA *p_data)
+{
+    /* initialize control block */
+    memset(&bta_ag_cb, 0, sizeof(tBTA_AG_CB));
+
+    /* store callback function */
+    bta_ag_cb.p_cback = p_data->api_enable.p_cback;
+    bta_ag_cb.parse_mode = p_data->api_enable.parse_mode;
+
+    /* call init call-out */
+    bta_ag_co_init();
+
+    bta_sys_collision_register (BTA_ID_AG, bta_ag_collision_cback);
+
+    /* call callback with enable event */
+    (*bta_ag_cb.p_cback)(BTA_AG_ENABLE_EVT, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_api_disable
+**
+** Description      Handle an API disable event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_api_disable(tBTA_AG_DATA *p_data)
+{
+    /* deregister all scbs in use */
+    tBTA_AG_SCB     *p_scb = &bta_ag_cb.scb[0];
+    BOOLEAN         do_dereg = FALSE;
+    int             i;
+
+    if (!bta_sys_is_register (BTA_ID_AG))
+    {
+        APPL_TRACE_ERROR0("BTA AG is already disabled, ignoring ...");
+        return;
+    }
+
+    /* De-register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_deregister(BTA_ID_AG);
+    GKI_sched_unlock();
+
+    for (i = 0; i < BTA_AG_NUM_SCB; i++, p_scb++)
+    {
+        if (p_scb->in_use)
+        {
+            bta_ag_sm_execute(p_scb, BTA_AG_API_DEREGISTER_EVT, p_data);
+            do_dereg = TRUE;
+        }
+    }
+
+    if (!do_dereg)
+    {
+        /* Done, send callback evt to app */
+        (*bta_ag_cb.p_cback)(BTA_AG_DISABLE_EVT, NULL);
+    }
+
+    bta_sys_collision_register (BTA_ID_AG, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_api_register
+**
+** Description      Handle an API event registers a new service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_api_register(tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_SCB     *p_scb;
+    tBTA_AG_REGISTER reg;
+
+    /* allocate an scb */
+    if ((p_scb = bta_ag_scb_alloc()) != NULL)
+    {
+        bta_ag_sm_execute(p_scb, p_data->hdr.event, p_data);
+    }
+    else
+    {
+        reg.status = BTA_AG_FAIL_RESOURCES;
+        (*bta_ag_cb.p_cback)(BTA_AG_REGISTER_EVT, (tBTA_AG *) &reg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_api_result
+**
+** Description      Handle an API result event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_api_result(tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_SCB     *p_scb;
+    int             i;
+
+    if (p_data->hdr.layer_specific != BTA_AG_HANDLE_ALL)
+    {
+        if ((p_scb = bta_ag_scb_by_idx(p_data->hdr.layer_specific)) != NULL)
+        {
+            bta_ag_sm_execute(p_scb, BTA_AG_API_RESULT_EVT, p_data);
+        }
+    }
+    else
+    {
+        for (i = 0, p_scb = &bta_ag_cb.scb[0]; i < BTA_AG_NUM_SCB; i++, p_scb++)
+        {
+            if (p_scb->in_use)
+            {
+                bta_ag_sm_execute(p_scb, BTA_AG_API_RESULT_EVT, p_data);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sm_execute
+**
+** Description      State machine event handling function for AG
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sm_execute(tBTA_AG_SCB *p_scb, UINT16 event, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_ST_TBL      state_table;
+    UINT8               action;
+    int                 i;
+
+#if BTA_AG_DEBUG == TRUE
+    UINT16  in_event = event;
+    UINT8   in_state = p_scb->state;
+
+    /* Ignore displaying of AT results when not connected (Ignored in state machine) */
+    if (in_event != BTA_AG_API_RESULT_EVT || p_scb->state == BTA_AG_OPEN_ST)
+    {
+        APPL_TRACE_EVENT5("AG evt (hdl 0x%04x): State %d (%s), Event 0x%04x (%s)",
+                           bta_ag_scb_to_idx(p_scb),
+                           p_scb->state, bta_ag_state_str(p_scb->state),
+                           event, bta_ag_evt_str(event, p_data->api_result.result));
+    }
+#else
+    APPL_TRACE_EVENT3("AG evt (hdl 0x%04x): State %d, Event 0x%04x",
+                      bta_ag_scb_to_idx(p_scb), p_scb->state, event);
+#endif
+
+    event &= 0x00FF;
+    if (event >= (BTA_AG_MAX_EVT & 0x00FF))
+    {
+        APPL_TRACE_ERROR0("AG evt out of range, ignoring...");
+        return;
+    }
+
+    /* look up the state table for the current state */
+    state_table = bta_ag_st_tbl[p_scb->state];
+
+    /* set next state */
+    p_scb->state = state_table[event][BTA_AG_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < BTA_AG_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_AG_IGNORE)
+        {
+            (*bta_ag_action[action])(p_scb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+#if BTA_AG_DEBUG == TRUE
+    if (p_scb->state != in_state)
+    {
+        APPL_TRACE_EVENT3("BTA AG State Change: [%s] -> [%s] after Event [%s]",
+                      bta_ag_state_str(in_state),
+                      bta_ag_state_str(p_scb->state),
+                      bta_ag_evt_str(in_event, p_data->api_result.result));
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_hdl_event
+**
+** Description      Data gateway main event handling function.
+**
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN bta_ag_hdl_event(BT_HDR *p_msg)
+{
+    tBTA_AG_SCB *p_scb;
+
+    switch (p_msg->event)
+    {
+        /* handle enable event */
+        case BTA_AG_API_ENABLE_EVT:
+            bta_ag_api_enable((tBTA_AG_DATA *) p_msg);
+            break;
+
+        /* handle disable event */
+        case BTA_AG_API_DISABLE_EVT:
+            bta_ag_api_disable((tBTA_AG_DATA *) p_msg);
+            break;
+
+        /* handle register event */
+        case BTA_AG_API_REGISTER_EVT:
+            bta_ag_api_register((tBTA_AG_DATA *) p_msg);
+            break;
+
+        /* handle result event */
+        case BTA_AG_API_RESULT_EVT:
+            bta_ag_api_result((tBTA_AG_DATA *) p_msg);
+            break;
+
+        /* all others reference scb by handle */
+        default:
+            if ((p_scb = bta_ag_scb_by_idx(p_msg->layer_specific)) != NULL)
+            {
+                bta_ag_sm_execute(p_scb, p_msg->event, (tBTA_AG_DATA *) p_msg);
+            }
+            break;
+    }
+    return TRUE;
+}
+
+#if BTA_AG_DEBUG == TRUE
+static char *bta_ag_evt_str(UINT16 event, tBTA_AG_RES result)
+{
+    switch (event)
+    {
+    case BTA_AG_API_REGISTER_EVT:
+        return "Register Request";
+    case BTA_AG_API_DEREGISTER_EVT:
+        return "Deregister Request";
+    case BTA_AG_API_OPEN_EVT:
+        return "Open SLC Request";
+    case BTA_AG_API_CLOSE_EVT:
+        return "Close SLC Request";
+    case BTA_AG_API_AUDIO_OPEN_EVT:
+        return "Open Audio Request";
+    case BTA_AG_API_AUDIO_CLOSE_EVT:
+        return "Close Audio Request";
+    case BTA_AG_API_RESULT_EVT:
+        switch (result)
+        {
+        case BTA_AG_SPK_RES:            return ("AT Result  BTA_AG_SPK_RES");
+        case BTA_AG_MIC_RES:            return ("AT Result  BTA_AG_MIC_RES");
+        case BTA_AG_INBAND_RING_RES:    return ("AT Result  BTA_AG_INBAND_RING_RES");
+        case BTA_AG_CIND_RES:           return ("AT Result  BTA_AG_CIND_RES");
+        case BTA_AG_BINP_RES:           return ("AT Result  BTA_AG_BINP_RES");
+        case BTA_AG_IND_RES:            return ("AT Result  BTA_AG_IND_RES");
+        case BTA_AG_BVRA_RES:           return ("AT Result  BTA_AG_BVRA_RES");
+        case BTA_AG_CNUM_RES:           return ("AT Result  BTA_AG_CNUM_RES");
+        case BTA_AG_BTRH_RES:           return ("AT Result  BTA_AG_BTRH_RES");
+        case BTA_AG_CLCC_RES:           return ("AT Result  BTA_AG_CLCC_RES");
+        case BTA_AG_COPS_RES:           return ("AT Result  BTA_AG_COPS_RES");
+        case BTA_AG_IN_CALL_RES:        return ("AT Result  BTA_AG_IN_CALL_RES");
+        case BTA_AG_IN_CALL_CONN_RES:   return ("AT Result  BTA_AG_IN_CALL_CONN_RES");
+        case BTA_AG_CALL_WAIT_RES:      return ("AT Result  BTA_AG_CALL_WAIT_RES");
+        case BTA_AG_OUT_CALL_ORIG_RES:  return ("AT Result  BTA_AG_OUT_CALL_ORIG_RES");
+        case BTA_AG_OUT_CALL_ALERT_RES: return ("AT Result  BTA_AG_OUT_CALL_ALERT_RES");
+        case BTA_AG_OUT_CALL_CONN_RES:  return ("AT Result  BTA_AG_OUT_CALL_CONN_RES");
+        case BTA_AG_CALL_CANCEL_RES:    return ("AT Result  BTA_AG_CALL_CANCEL_RES");
+        case BTA_AG_END_CALL_RES:       return ("AT Result  BTA_AG_END_CALL_RES");
+        case BTA_AG_UNAT_RES:           return ("AT Result  BTA_AG_UNAT_RES");
+        default:                        return ("Unknown AG Result");
+        }
+    case BTA_AG_API_SETCODEC_EVT:
+        return "Set Codec Request";
+    case BTA_AG_RFC_OPEN_EVT:
+        return "RFC Opened";
+    case BTA_AG_RFC_CLOSE_EVT:
+        return "RFC Closed";
+    case BTA_AG_RFC_SRV_CLOSE_EVT:
+        return "RFC SRV Closed";
+    case BTA_AG_RFC_DATA_EVT:
+        return "RFC Data";
+    case BTA_AG_SCO_OPEN_EVT:
+        return "Audio Opened";
+    case BTA_AG_SCO_CLOSE_EVT:
+        return "Audio Closed";
+    case BTA_AG_DISC_ACP_RES_EVT:
+        return "Discovery ACP Result";
+    case BTA_AG_DISC_INT_RES_EVT:
+        return "Discovery INT Result";
+    case BTA_AG_DISC_OK_EVT:
+        return "Discovery OK";
+    case BTA_AG_DISC_FAIL_EVT:
+        return "Discovery Failed";
+    case BTA_AG_CI_RX_WRITE_EVT:
+        return "CI RX Write";
+    case BTA_AG_RING_TOUT_EVT:
+        return "Ring Timeout";
+    case BTA_AG_SVC_TOUT_EVT:
+        return "Service Timeout";
+    case BTA_AG_API_ENABLE_EVT:
+        return "Enable AG";
+    case BTA_AG_API_DISABLE_EVT:
+        return "Disable AG";
+    case BTA_AG_CI_SCO_DATA_EVT:
+        return "SCO data Callin";
+    case BTA_AG_CI_SLC_READY_EVT:
+        return "SLC Ready Callin";
+    default:
+        return "Unknown AG Event";
+    }
+}
+
+static char *bta_ag_state_str(UINT8 state)
+{
+    switch (state)
+    {
+    case BTA_AG_INIT_ST:
+        return "Initial";
+    case BTA_AG_OPENING_ST:
+        return "Opening";
+    case BTA_AG_OPEN_ST:
+        return "Open";
+    case BTA_AG_CLOSING_ST:
+        return "Closing";
+    default:
+        return "Unknown AG State";
+    }
+}
+
+#endif
diff --git a/bta/ag/bta_ag_rfc.c b/bta/ag/bta_ag_rfc.c
new file mode 100644
index 0000000..3575020
--- /dev/null
+++ b/bta/ag/bta_ag_rfc.c
@@ -0,0 +1,441 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the audio gateway functions controlling the RFCOMM
+ *  connections.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_int.h"
+#include "bta_ag_co.h"
+#include "btm_api.h"
+#include "port_api.h"
+#include "rfcdefs.h"
+#include "gki.h"
+#include "bd.h"
+
+/* Event mask for RfCOMM port callback */
+#define BTA_AG_PORT_EV_MASK         PORT_EV_RXCHAR
+
+/* each scb has its own rfcomm callbacks */
+void bta_ag_port_cback_1(UINT32 code, UINT16 port_handle);
+void bta_ag_port_cback_2(UINT32 code, UINT16 port_handle);
+void bta_ag_port_cback_3(UINT32 code, UINT16 port_handle);
+
+void bta_ag_mgmt_cback_1(UINT32 code, UINT16 port_handle);
+void bta_ag_mgmt_cback_2(UINT32 code, UINT16 port_handle);
+void bta_ag_mgmt_cback_3(UINT32 code, UINT16 port_handle);
+
+int bta_ag_data_cback_1(UINT16 port_handle, void *p_data, UINT16 len);
+int bta_ag_data_cback_2(UINT16 port_handle, void *p_data, UINT16 len);
+int bta_ag_data_cback_3(UINT16 port_handle, void *p_data, UINT16 len);
+
+/* rfcomm callback function tables */
+typedef tPORT_CALLBACK *tBTA_AG_PORT_CBACK;
+const tBTA_AG_PORT_CBACK bta_ag_port_cback_tbl[] =
+{
+    bta_ag_port_cback_1,
+    bta_ag_port_cback_2,
+    bta_ag_port_cback_3
+};
+
+const tBTA_AG_PORT_CBACK bta_ag_mgmt_cback_tbl[] =
+{
+    bta_ag_mgmt_cback_1,
+    bta_ag_mgmt_cback_2,
+    bta_ag_mgmt_cback_3
+};
+
+typedef tPORT_DATA_CALLBACK *tBTA_AG_DATA_CBACK;
+const tBTA_AG_DATA_CBACK bta_ag_data_cback_tbl[] =
+{
+    bta_ag_data_cback_1,
+    bta_ag_data_cback_2,
+    bta_ag_data_cback_3
+};
+
+/*******************************************************************************
+**
+** Function         bta_ag_port_cback
+**
+** Description      RFCOMM Port callback
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_port_cback(UINT32 code, UINT16 port_handle, UINT16 handle)
+{
+    BT_HDR      *p_buf;
+    tBTA_AG_SCB *p_scb;
+
+    if ((p_scb = bta_ag_scb_by_idx(handle)) != NULL)
+    {
+        /* ignore port events for port handles other than connected handle */
+        if (port_handle != p_scb->conn_handle)
+        {
+            APPL_TRACE_DEBUG3("ag_port_cback ignoring handle:%d conn_handle = %d other handle = %d",
+                              port_handle, p_scb->conn_handle, handle);
+            return;
+        }
+
+        if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+        {
+            p_buf->event = BTA_AG_RFC_DATA_EVT;
+            p_buf->layer_specific = handle;
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_mgmt_cback
+**
+** Description      RFCOMM management callback
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_mgmt_cback(UINT32 code, UINT16 port_handle, UINT16 handle)
+{
+    tBTA_AG_RFC     *p_buf;
+    tBTA_AG_SCB     *p_scb;
+    UINT16          event;
+    UINT8           i;
+    BOOLEAN         found_handle = FALSE;
+
+    APPL_TRACE_DEBUG3("ag_mgmt_cback : code = %d, port_handle = %d, handle = %d",
+                        code, port_handle, handle);
+
+    if ((p_scb = bta_ag_scb_by_idx(handle)) != NULL)
+    {
+        /* ignore close event for port handles other than connected handle */
+        if ((code != PORT_SUCCESS) && (port_handle != p_scb->conn_handle))
+        {
+            APPL_TRACE_DEBUG1("ag_mgmt_cback ignoring handle:%d", port_handle);
+            return;
+        }
+
+        if (code == PORT_SUCCESS)
+        {
+            if (p_scb->conn_handle)     /* Outgoing connection */
+            {
+                if (port_handle == p_scb->conn_handle)
+                    found_handle = TRUE;
+            }
+            else                        /* Incoming connection */
+            {
+                for (i = 0; i < BTA_AG_NUM_IDX; i++)
+                {
+                    if (port_handle == p_scb->serv_handle[i])
+                        found_handle = TRUE;
+                }
+            }
+
+            if (!found_handle)
+            {
+                APPL_TRACE_ERROR1 ("bta_ag_mgmt_cback: PORT_SUCCESS, ignoring handle = %d", port_handle);
+                return;
+            }
+
+            event = BTA_AG_RFC_OPEN_EVT;
+        }
+        /* distinguish server close events */
+        else if (port_handle == p_scb->conn_handle)
+        {
+            event = BTA_AG_RFC_CLOSE_EVT;
+        }
+        else
+        {
+            event = BTA_AG_RFC_SRV_CLOSE_EVT;
+        }
+
+        if ((p_buf = (tBTA_AG_RFC *) GKI_getbuf(sizeof(tBTA_AG_RFC))) != NULL)
+        {
+            p_buf->hdr.event = event;
+            p_buf->hdr.layer_specific = handle;
+            p_buf->port_handle = port_handle;
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_data_cback
+**
+** Description      RFCOMM data callback
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static int bta_ag_data_cback(UINT16 port_handle, void *p_data, UINT16 len, UINT16 handle)
+{
+    /* call data call-out directly */
+    bta_ag_co_tx_write(handle, (UINT8 *) p_data, len);
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_port_cback_1 to 3
+**                  bta_ag_mgmt_cback_1 to 3
+**
+** Description      RFCOMM callback functions.  This is an easy way to
+**                  distinguish scb from the callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_mgmt_cback_1(UINT32 code, UINT16 handle) {bta_ag_mgmt_cback(code, handle, 1);}
+void bta_ag_mgmt_cback_2(UINT32 code, UINT16 handle) {bta_ag_mgmt_cback(code, handle, 2);}
+void bta_ag_mgmt_cback_3(UINT32 code, UINT16 handle) {bta_ag_mgmt_cback(code, handle, 3);}
+void bta_ag_port_cback_1(UINT32 code, UINT16 handle) {bta_ag_port_cback(code, handle, 1);}
+void bta_ag_port_cback_2(UINT32 code, UINT16 handle) {bta_ag_port_cback(code, handle, 2);}
+void bta_ag_port_cback_3(UINT32 code, UINT16 handle) {bta_ag_port_cback(code, handle, 3);}
+
+/*******************************************************************************
+**
+** Function         bta_ag_data_cback_1 to 3
+**
+** Description      RFCOMM data callback functions.  This is an easy way to
+**                  distinguish scb from the callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+int bta_ag_data_cback_1(UINT16 port_handle, void *p_data, UINT16 len)
+{
+    return bta_ag_data_cback(port_handle, p_data, len, 1);
+}
+int bta_ag_data_cback_2(UINT16 port_handle, void *p_data, UINT16 len)
+{
+    return bta_ag_data_cback(port_handle, p_data, len, 2);
+}
+int bta_ag_data_cback_3(UINT16 port_handle, void *p_data, UINT16 len)
+{
+    return bta_ag_data_cback(port_handle, p_data, len, 3);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_setup_port
+**
+** Description      Setup RFCOMM port for use by AG.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_setup_port(tBTA_AG_SCB *p_scb, UINT16 handle)
+{
+    UINT16 i = bta_ag_scb_to_idx(p_scb) - 1;
+
+    /* set up data callback if using pass through mode */
+    if (bta_ag_cb.parse_mode == BTA_AG_PASS_THROUGH)
+    {
+        PORT_SetDataCallback(handle, bta_ag_data_cback_tbl[i]);
+    }
+
+    PORT_SetEventMask(handle, BTA_AG_PORT_EV_MASK);
+    PORT_SetEventCallback(handle, bta_ag_port_cback_tbl[i]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_start_servers
+**
+** Description      Setup RFCOMM servers for use by AG.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_start_servers(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK services)
+{
+    int i;
+    int bta_ag_port_status;
+
+    services >>= BTA_HSP_SERVICE_ID;
+    for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++, services >>= 1)
+    {
+        /* if service is set in mask */
+        if (services & 1)
+        {
+            BTM_SetSecurityLevel(FALSE, "", bta_ag_sec_id[i], p_scb->serv_sec_mask,
+                BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, bta_ag_cb.profile[i].scn);
+
+            bta_ag_port_status =  RFCOMM_CreateConnection(bta_ag_uuid[i], bta_ag_cb.profile[i].scn,
+                TRUE, BTA_AG_MTU, (UINT8 *) bd_addr_any, &(p_scb->serv_handle[i]),
+                bta_ag_mgmt_cback_tbl[bta_ag_scb_to_idx(p_scb) - 1]);
+
+            if( bta_ag_port_status  == PORT_SUCCESS )
+            {
+                bta_ag_setup_port(p_scb, p_scb->serv_handle[i]);
+            }
+            else
+            {
+                /* TODO: CR#137125 to handle to error properly */
+                APPL_TRACE_DEBUG1("bta_ag_start_servers: RFCOMM_CreateConnection returned error:%d", bta_ag_port_status);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_close_servers
+**
+** Description      Close RFCOMM servers port for use by AG.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_close_servers(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK services)
+{
+    int i;
+
+    services >>= BTA_HSP_SERVICE_ID;
+    for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++, services >>= 1)
+    {
+        /* if service is set in mask */
+        if (services & 1)
+        {
+            RFCOMM_RemoveServer(p_scb->serv_handle[i]);
+            p_scb->serv_handle[i] = 0;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_is_server_closed
+**
+** Description      Returns TRUE if all servers are closed.
+**
+**
+** Returns          TRUE if all servers are closed, FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN bta_ag_is_server_closed (tBTA_AG_SCB *p_scb)
+{
+    UINT8 xx;
+    BOOLEAN is_closed = TRUE;
+
+    for (xx = 0; xx < BTA_AG_NUM_IDX; xx++)
+    {
+        if (p_scb->serv_handle[xx] != 0)
+            is_closed = FALSE;
+    }
+
+    return is_closed;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_do_open
+**
+** Description      Open an RFCOMM connection to the peer device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_do_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    BTM_SetSecurityLevel(TRUE, "", bta_ag_sec_id[p_scb->conn_service],
+        p_scb->cli_sec_mask, BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, p_scb->peer_scn);
+
+    if (RFCOMM_CreateConnection(bta_ag_uuid[p_scb->conn_service], p_scb->peer_scn,
+            FALSE, BTA_AG_MTU, p_scb->peer_addr, &(p_scb->conn_handle),
+            bta_ag_mgmt_cback_tbl[bta_ag_scb_to_idx(p_scb) - 1]) == PORT_SUCCESS)
+    {
+        bta_ag_setup_port(p_scb, p_scb->conn_handle);
+        APPL_TRACE_DEBUG1("bta_ag_rfc_do_open : conn_handle = %d", p_scb->conn_handle);
+    }
+    /* RFCOMM create connection failed; send ourselves RFCOMM close event */
+    else
+    {
+        bta_ag_sm_execute(p_scb, BTA_AG_RFC_CLOSE_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_rfc_do_close
+**
+** Description      Close RFCOMM connection.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_rfc_do_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_RFC     *p_buf;
+
+    if (p_scb->conn_handle)
+    {
+        RFCOMM_RemoveConnection(p_scb->conn_handle);
+    }
+    else
+    {
+        /* Close API was called while AG is in Opening state.               */
+        /* Need to trigger the state machine to send callback to the app    */
+        /* and move back to INIT state.                                     */
+        if ((p_buf = (tBTA_AG_RFC *) GKI_getbuf(sizeof(tBTA_AG_RFC))) != NULL)
+        {
+            p_buf->hdr.event = BTA_AG_RFC_CLOSE_EVT;
+            p_buf->hdr.layer_specific = bta_ag_scb_to_idx(p_scb);
+            bta_sys_sendmsg(p_buf);
+        }
+
+        /* Cancel SDP if it had been started. */
+        /*
+        if(p_scb->p_disc_db)
+        {
+            (void)SDP_CancelServiceSearch (p_scb->p_disc_db);
+        }
+        */
+    }
+
+#ifdef _WIN32_WCE
+    {
+        /* Windows versions of RFCOMM does NOT generate a closed callback when we close */
+        tPORT_CALLBACK *rfc_mgmt_cback = bta_ag_mgmt_cback_tbl[bta_ag_scb_to_idx(p_scb) - 1];
+
+        if (rfc_mgmt_cback)
+        {
+            (rfc_mgmt_cback)(PORT_CLOSED, p_scb->conn_handle);
+        }
+    }
+#endif
+}
+
diff --git a/bta/ag/bta_ag_sco.c b/bta/ag/bta_ag_sco.c
new file mode 100644
index 0000000..0c811b4
--- /dev/null
+++ b/bta/ag/bta_ag_sco.c
@@ -0,0 +1,1662 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for managing the SCO connection used in AG.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_ag_api.h"
+#include "bta_ag_co.h"
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+#include "bta_dm_co.h"
+#endif
+#include "bta_ag_int.h"
+#include "btm_api.h"
+#include "gki.h"
+
+#ifndef BTA_AG_SCO_DEBUG
+#define BTA_AG_SCO_DEBUG FALSE
+#endif
+
+#ifndef BTA_AG_CODEC_NEGO_TIMEOUT
+#define BTA_AG_CODEC_NEGO_TIMEOUT   3000
+#endif
+
+#if BTA_AG_SCO_DEBUG == TRUE
+static char *bta_ag_sco_evt_str(UINT8 event);
+static char *bta_ag_sco_state_str(UINT8 state);
+#endif
+
+#define BTA_AG_NO_EDR_ESCO  (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 | \
+                             BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | \
+                             BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | \
+                             BTM_SCO_PKT_TYPES_MASK_NO_3_EV5)
+
+/* sco events */
+enum
+{
+    BTA_AG_SCO_LISTEN_E,        /* listen request */
+    BTA_AG_SCO_OPEN_E,          /* open request */
+    BTA_AG_SCO_XFER_E,          /* transfer request */
+#if (BTM_WBS_INCLUDED == TRUE )
+    BTA_AG_SCO_CN_DONE_E,       /* codec negotiation done */
+    BTA_AG_SCO_REOPEN_E,        /* Retry with other codec when failed */
+#endif
+    BTA_AG_SCO_CLOSE_E,         /* close request */
+    BTA_AG_SCO_SHUTDOWN_E,      /* shutdown request */
+    BTA_AG_SCO_CONN_OPEN_E,     /* sco open */
+    BTA_AG_SCO_CONN_CLOSE_E,    /* sco closed */
+    BTA_AG_SCO_CI_DATA_E        /* SCO data ready */
+};
+
+#if (BTM_WBS_INCLUDED == TRUE )
+#define BTA_AG_NUM_CODECS   2
+static const tBTM_ESCO_PARAMS bta_ag_esco_params[BTA_AG_NUM_CODECS] =
+{
+    /* CVSD */
+    {
+        BTM_64KBITS_RATE,                   /* TX Bandwidth (64 kbits/sec)              */
+        BTM_64KBITS_RATE,                   /* RX Bandwidth (64 kbits/sec)              */
+        0x000a,                             /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3)  */
+        BTM_VOICE_SETTING_CVSD,             /* Inp Linear, Air CVSD, 2s Comp, 16bit     */
+       (BTM_SCO_PKT_TYPES_MASK_HV1      +  /* Packet Types                             */
+        BTM_SCO_PKT_TYPES_MASK_HV2      +
+        BTM_SCO_PKT_TYPES_MASK_HV3      +
+        BTM_SCO_PKT_TYPES_MASK_EV3      +
+        BTM_SCO_PKT_TYPES_MASK_EV4      +
+        BTM_SCO_PKT_TYPES_MASK_EV5      +
+        BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 +
+        BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
+        BTM_ESCO_RETRANS_POWER       /* Retransmission effort                      */
+    },
+    /* mSBC */
+    {
+        BTM_64KBITS_RATE,                   /* TX Bandwidth (64 kbits/sec), 8000        */
+        BTM_64KBITS_RATE,                   /* RX Bandwidth (64 kbits/sec), 8000        */
+        13,                                 /* 13 ms                                    */
+        BTM_VOICE_SETTING_TRANS,            /* Inp Linear, Transparent, 2s Comp, 16bit  */
+       (BTM_SCO_PKT_TYPES_MASK_EV3      |   /* Packet Types : EV3 + 2-EV3               */
+        BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 |
+        BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
+        BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
+        BTM_ESCO_RETRANS_QUALITY       /* Retransmission effort                      */
+    }
+};
+#else
+static const tBTM_ESCO_PARAMS bta_ag_esco_params =
+{
+    BTM_64KBITS_RATE,                   /* TX Bandwidth (64 kbits/sec)              */
+    BTM_64KBITS_RATE,                   /* RX Bandwidth (64 kbits/sec)              */
+    0x000a,                             /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3)  */
+    0x0060,                             /* Inp Linear, Air CVSD, 2s Comp, 16bit     */
+    (BTM_SCO_PKT_TYPES_MASK_HV1      +  /* Packet Types                             */
+     BTM_SCO_PKT_TYPES_MASK_HV2      +
+     BTM_SCO_PKT_TYPES_MASK_HV3      +
+     BTM_SCO_PKT_TYPES_MASK_EV3      +
+     BTM_SCO_PKT_TYPES_MASK_EV4      +
+     BTM_SCO_PKT_TYPES_MASK_EV5      +
+     BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 +
+     BTM_SCO_PKT_TYPES_MASK_NO_3_EV5),
+     BTM_ESCO_RETRANS_POWER       /* Retransmission effort                      */
+};
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_conn_cback
+**
+** Description      BTM SCO connection callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_sco_conn_cback(UINT16 sco_idx)
+{
+    UINT16  handle;
+    BT_HDR  *p_buf;
+    tBTA_AG_SCB *p_scb;
+
+    /* match callback to scb; first check current sco scb */
+    if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use)
+    {
+        handle = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb);
+    }
+    /* then check for scb connected to this peer */
+    else
+    {
+        /* Check if SLC is up */
+        handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_idx));
+        p_scb = bta_ag_scb_by_idx(handle);
+        if(p_scb && !p_scb->svc_conn)
+            handle = 0;
+    }
+
+    if (handle != 0)
+    {
+        if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+        {
+            p_buf->event = BTA_AG_SCO_OPEN_EVT;
+            p_buf->layer_specific = handle;
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+    /* no match found; disconnect sco, init sco variables */
+    else
+    {
+        bta_ag_cb.sco.p_curr_scb = NULL;
+        bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST;
+        BTM_RemoveSco(sco_idx);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_disc_cback
+**
+** Description      BTM SCO disconnection callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_sco_disc_cback(UINT16 sco_idx)
+{
+    BT_HDR  *p_buf;
+    UINT16  handle = 0;
+
+    APPL_TRACE_DEBUG3 ("bta_ag_sco_disc_cback(): sco_idx: 0x%x  p_cur_scb: 0x%08x  sco.state: %d", sco_idx, bta_ag_cb.sco.p_curr_scb, bta_ag_cb.sco.state);
+
+    APPL_TRACE_DEBUG4 ("bta_ag_sco_disc_cback(): scb[0] addr: 0x%08x  in_use: %u  sco_idx: 0x%x  sco state: %u",
+                       &bta_ag_cb.scb[0], bta_ag_cb.scb[0].in_use, bta_ag_cb.scb[0].sco_idx, bta_ag_cb.scb[0].state);
+    APPL_TRACE_DEBUG4 ("bta_ag_sco_disc_cback(): scb[1] addr: 0x%08x  in_use: %u  sco_idx: 0x%x  sco state: %u",
+                       &bta_ag_cb.scb[1], bta_ag_cb.scb[1].in_use, bta_ag_cb.scb[1].sco_idx, bta_ag_cb.scb[1].state);
+
+    /* match callback to scb */
+    if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb->in_use)
+    {
+        /* We only care about callbacks for the active SCO */
+        if (bta_ag_cb.sco.p_curr_scb->sco_idx != sco_idx)
+        {
+            if (bta_ag_cb.sco.p_curr_scb->sco_idx != 0xFFFF)
+                return;
+        }
+        handle  = bta_ag_scb_to_idx(bta_ag_cb.sco.p_curr_scb);
+    }
+
+    if (handle != 0)
+    {
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+        tBTM_STATUS status = BTM_ConfigScoPath(BTM_SCO_ROUTE_PCM, NULL, NULL, TRUE);
+        APPL_TRACE_DEBUG1("bta_ag_sco_disc_cback sco close config status = %d", status);
+	    /* SCO clean up here */
+        bta_dm_sco_co_close();
+#endif
+
+#if (BTM_WBS_INCLUDED == TRUE )
+        /* Restore settings */
+        if(bta_ag_cb.sco.p_curr_scb->inuse_codec == BTA_AG_CODEC_MSBC)
+        {
+            BTM_SetWBSCodec (BTM_SCO_CODEC_NONE);
+            BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD);
+
+            /* If SCO open was initiated by AG and failed for mSBC, try CVSD again. */
+            if (bta_ag_sco_is_opening (bta_ag_cb.sco.p_curr_scb))
+            {
+                bta_ag_cb.sco.p_curr_scb->codec_fallback = TRUE;
+                APPL_TRACE_DEBUG0("Fallback to CVSD");
+            }
+        }
+
+        bta_ag_cb.sco.p_curr_scb->inuse_codec = BTA_AG_CODEC_NONE;
+#endif
+
+        if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+        {
+            p_buf->event = BTA_AG_SCO_CLOSE_EVT;
+            p_buf->layer_specific = handle;
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+    /* no match found */
+    else
+    {
+        APPL_TRACE_DEBUG0("no scb for ag_sco_disc_cback");
+
+        /* sco could be closed after scb dealloc'ed */
+        if (bta_ag_cb.sco.p_curr_scb != NULL)
+        {
+            bta_ag_cb.sco.p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+            bta_ag_cb.sco.p_curr_scb = NULL;
+            bta_ag_cb.sco.state = BTA_AG_SCO_SHUTDOWN_ST;
+        }
+    }
+}
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+/*******************************************************************************
+**
+** Function         bta_ag_sco_read_cback
+**
+** Description      Callback function is the callback function for incoming
+**                  SCO data over HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_sco_read_cback (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status)
+{
+    if (status != BTM_SCO_DATA_CORRECT)
+    {
+        APPL_TRACE_DEBUG1("bta_ag_sco_read_cback: status(%d)", status);
+    }
+
+    /* Callout function must free the data. */
+    bta_dm_sco_co_in_data (p_data, status);
+}
+#endif
+/*******************************************************************************
+**
+** Function         bta_ag_remove_sco
+**
+** Description      Removes the specified SCO from the system.
+**                  If only_active is TRUE, then SCO is only removed if connected
+**
+** Returns          BOOLEAN   - TRUE if Sco removal was started
+**
+*******************************************************************************/
+static BOOLEAN bta_ag_remove_sco(tBTA_AG_SCB *p_scb, BOOLEAN only_active)
+{
+    BOOLEAN     removed_started = FALSE;
+    tBTM_STATUS	status;
+
+    if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
+    {
+        if (!only_active || p_scb->sco_idx == bta_ag_cb.sco.cur_idx)
+        {
+            status = BTM_RemoveSco(p_scb->sco_idx);
+
+            APPL_TRACE_DEBUG2("ag remove sco: inx 0x%04x, status:0x%x", p_scb->sco_idx, status);
+
+            if (status == BTM_CMD_STARTED)
+            {
+                /* Sco is connected; set current control block */
+                bta_ag_cb.sco.p_curr_scb = p_scb;
+
+                removed_started = TRUE;
+            }
+            /* If no connection reset the sco handle */
+            else if ( (status == BTM_SUCCESS) || (status == BTM_UNKNOWN_ADDR) )
+            {
+                p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+            }
+        }
+    }
+    return removed_started;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_esco_connreq_cback
+**
+** Description      BTM eSCO connection requests and eSCO change requests
+**                  Only the connection requests are processed by BTA.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_esco_connreq_cback(tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data)
+{
+    tBTA_AG_SCB         *p_scb;
+    UINT16               handle;
+    UINT16               sco_inx = p_data->conn_evt.sco_inx;
+
+    /* Only process connection requests */
+    if (event == BTM_ESCO_CONN_REQ_EVT)
+    {
+        if ((handle = bta_ag_idx_by_bdaddr(BTM_ReadScoBdAddr(sco_inx))) != 0 &&
+            ((p_scb = bta_ag_scb_by_idx(handle)) != NULL) && p_scb->svc_conn)
+        {
+            p_scb->sco_idx = sco_inx;
+
+            /* If no other SCO active, allow this one */
+            if (!bta_ag_cb.sco.p_curr_scb)
+            {
+                APPL_TRACE_EVENT1("bta_ag_esco_connreq_cback: Accept Conn Request (sco_inx 0x%04x)", sco_inx);
+                bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt);
+
+                bta_ag_cb.sco.state = BTA_AG_SCO_OPENING_ST;
+                bta_ag_cb.sco.p_curr_scb = p_scb;
+                bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
+            }
+            else    /* Begin a transfer: Close current SCO before responding */
+            {
+                APPL_TRACE_DEBUG0("bta_ag_esco_connreq_cback: Begin XFER");
+                bta_ag_cb.sco.p_xfer_scb = p_scb;
+                bta_ag_cb.sco.conn_data = p_data->conn_evt;
+                bta_ag_cb.sco.state = BTA_AG_SCO_OPEN_XFER_ST;
+
+                if (!bta_ag_remove_sco(bta_ag_cb.sco.p_curr_scb, TRUE))
+                {
+                    APPL_TRACE_ERROR1("bta_ag_esco_connreq_cback: Nothing to remove so accept Conn Request (sco_inx 0x%04x)", sco_inx);
+                    bta_ag_cb.sco.p_xfer_scb = NULL;
+                    bta_ag_cb.sco.state = BTA_AG_SCO_LISTEN_ST;
+
+                    bta_ag_sco_conn_rsp(p_scb, &p_data->conn_evt);
+                }
+            }
+        }
+        /* If error occurred send reject response immediately */
+        else
+        {
+            APPL_TRACE_WARNING0("no scb for bta_ag_esco_connreq_cback or no resources");
+            BTM_EScoConnRsp(p_data->conn_evt.sco_inx, HCI_ERR_HOST_REJECT_RESOURCES, NULL);
+        }
+    }
+    /* Received a change in the esco link */
+    else if (event == BTM_ESCO_CHG_EVT)
+    {
+        APPL_TRACE_EVENT5("eSCO change event (inx %d): rtrans %d, rxlen %d, txlen %d, txint %d",
+            p_data->chg_evt.sco_inx,
+            p_data->chg_evt.retrans_window, p_data->chg_evt.rx_pkt_len,
+            p_data->chg_evt.tx_pkt_len, p_data->chg_evt.tx_interval);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_cback_sco
+**
+** Description      Call application callback function with SCO event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_cback_sco(tBTA_AG_SCB *p_scb, UINT8 event)
+{
+    tBTA_AG_HDR    sco;
+
+    sco.handle = bta_ag_scb_to_idx(p_scb);
+    sco.app_id = p_scb->app_id;
+
+    /* call close cback */
+    (*bta_ag_cb.p_cback)(event, (tBTA_AG *) &sco);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_create_sco
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_create_sco(tBTA_AG_SCB *p_scb, BOOLEAN is_orig)
+{
+    tBTM_STATUS       status;
+    UINT8            *p_bd_addr = NULL;
+    tBTM_ESCO_PARAMS params;
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_PEER_CODEC  esco_codec = BTM_SCO_CODEC_CVSD;
+    int codec_index = 0;
+#endif
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    tBTM_SCO_ROUTE_TYPE sco_route;
+    tBTA_CODEC_INFO     codec_info = {BTA_SCO_CODEC_PCM};
+    UINT32              pcm_sample_rate;
+#endif
+
+    /* Make sure this sco handle is not already in use */
+    if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
+    {
+        APPL_TRACE_WARNING1("bta_ag_create_sco: Index 0x%04x Already In Use!",
+                             p_scb->sco_idx);
+        return;
+    }
+
+#if (BTM_WBS_INCLUDED == TRUE )
+    if ((p_scb->sco_codec == BTM_SCO_CODEC_MSBC) &&
+        !p_scb->codec_fallback &&
+        !p_scb->retry_with_sco_only)
+        esco_codec = BTM_SCO_CODEC_MSBC;
+
+    if (p_scb->codec_fallback)
+    {
+        p_scb->codec_fallback = FALSE;
+
+        /* Force AG to send +BCS for the next audio connection. */
+        p_scb->codec_updated = TRUE;
+    }
+
+    if (esco_codec == BTM_SCO_CODEC_MSBC)
+        codec_index = esco_codec - 1;
+
+    params = bta_ag_esco_params[codec_index];
+#else
+    params = bta_ag_esco_params;
+#endif
+
+    if(bta_ag_cb.sco.param_updated) /* If we do not use the default parameters */
+        params = bta_ag_cb.sco.params;
+
+    if(!bta_ag_cb.sco.param_updated)
+    {
+#if (BTM_WBS_INCLUDED == TRUE)
+        if (!codec_index)   /* For non-WBS */
+#endif
+        {
+            /* Use the application packet types (5 slot EV packets not allowed) */
+            params.packet_types = p_bta_ag_cfg->sco_pkt_types     |
+                                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
+                                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV5;
+        }
+    }
+
+    /* if initiating set current scb and peer bd addr */
+    if (is_orig)
+    {
+        /* Attempt to use eSCO if remote host supports HFP >= 1.5 */
+        /* Need to find out from SIG if HSP can use eSCO; for now use SCO */
+        if (p_scb->conn_service == BTA_AG_HFP && p_scb->peer_version >= HFP_VERSION_1_5 && !p_scb->retry_with_sco_only)
+        {
+
+            BTM_SetEScoMode(BTM_LINK_TYPE_ESCO, &params);
+            /* If ESCO or EDR ESCO, retry with SCO only in case of failure */
+            if((params.packet_types & BTM_ESCO_LINK_ONLY_MASK)
+               ||!((params.packet_types & ~(BTM_ESCO_LINK_ONLY_MASK | BTM_SCO_LINK_ONLY_MASK)) ^ BTA_AG_NO_EDR_ESCO))
+            {
+#if (BTM_WBS_INCLUDED == TRUE )
+                if (esco_codec != BTA_AG_CODEC_MSBC)
+                {
+                    p_scb->retry_with_sco_only = TRUE;
+                    APPL_TRACE_API0("Setting retry_with_sco_only to TRUE");
+                }
+                else    /* Do not use SCO when using mSBC */
+                {
+                    p_scb->retry_with_sco_only = FALSE;
+                    APPL_TRACE_API0("Setting retry_with_sco_only to FALSE");
+                }
+#else
+                p_scb->retry_with_sco_only = TRUE;
+                APPL_TRACE_API0("Setting retry_with_sco_only to TRUE");
+#endif
+            }
+        }
+        else
+        {
+            if(p_scb->retry_with_sco_only)
+                APPL_TRACE_API0("retrying with SCO only");
+            p_scb->retry_with_sco_only = FALSE;
+
+            BTM_SetEScoMode(BTM_LINK_TYPE_SCO, &params);
+        }
+
+        bta_ag_cb.sco.p_curr_scb = p_scb;
+
+        /* tell sys to stop av if any */
+        bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+        /* Allow any platform specific pre-SCO set up to take place */
+        bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_SETUP);
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+#if (BTM_WBS_INCLUDED == TRUE)
+        if (esco_codec == BTA_AG_CODEC_MSBC)
+            pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_16K;
+        else
+#endif
+            pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K;
+
+        sco_route = bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id);
+#endif
+
+#if (BTM_WBS_INCLUDED == TRUE )
+        if (esco_codec == BTA_AG_CODEC_MSBC)
+        {
+            /* Enable mSBC codec in fw */
+            BTM_SetWBSCodec (esco_codec);
+        }
+
+        /* Specify PCM input for SBC codec in fw */
+        BTM_ConfigI2SPCM (esco_codec, (UINT8)HCI_BRCM_I2SPCM_IS_DEFAULT_ROLE, (UINT8)HCI_BRCM_I2SPCM_SAMPLE_DEFAULT, (UINT8)HCI_BRCM_I2SPCM_CLOCK_DEFAULT);
+
+        /* This setting may not be necessary */
+        /* To be verified with stable 2049 boards */
+        if (esco_codec == BTA_AG_CODEC_MSBC)
+            BTM_WriteVoiceSettings (BTM_VOICE_SETTING_TRANS);
+        else
+            BTM_WriteVoiceSettings (BTM_VOICE_SETTING_CVSD);
+
+        /* save the current codec because sco_codec can be updated while SCO is open. */
+        p_scb->inuse_codec = esco_codec;
+#endif
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+        /* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */
+        BTM_ConfigScoPath(sco_route, bta_ag_sco_read_cback, NULL, TRUE);
+#endif
+        bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
+    }
+    else
+        p_scb->retry_with_sco_only = FALSE;
+
+    p_bd_addr = p_scb->peer_addr;
+
+    status = BTM_CreateSco(p_bd_addr, is_orig, params.packet_types,
+                           &p_scb->sco_idx, bta_ag_sco_conn_cback,
+                           bta_ag_sco_disc_cback);
+    if (status == BTM_CMD_STARTED)
+    {
+        if (!is_orig)
+        {
+            BTM_RegForEScoEvts(p_scb->sco_idx, bta_ag_esco_connreq_cback);
+        }
+        else    /* Initiating the connection, set the current sco handle */
+        {
+            bta_ag_cb.sco.cur_idx = p_scb->sco_idx;
+        }
+    }
+
+    APPL_TRACE_API4("ag create sco: orig %d, inx 0x%04x, status 0x%x, pkt types 0x%04x",
+                      is_orig, p_scb->sco_idx, status, params.packet_types);
+}
+
+#if (BTM_WBS_INCLUDED == TRUE )
+/*******************************************************************************
+**
+** Function         bta_ag_cn_timer_cback
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_cn_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+    tBTA_AG_SCB *p_scb;
+
+    if (p_tle)
+    {
+        p_scb = (tBTA_AG_SCB *)p_tle->param;
+
+        if (p_scb)
+        {
+            /* Announce that codec negotiation failed. */
+            bta_ag_sco_codec_nego(p_scb, FALSE);
+
+            /* call app callback */
+            bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_codec_negotiate
+**
+** Description      Initiate codec negotiation by sending AT command.
+**                  If not necessary, skip negotiation.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_codec_negotiate(tBTA_AG_SCB *p_scb)
+{
+    bta_ag_cb.sco.p_curr_scb = p_scb;
+
+    if (p_scb->codec_updated || p_scb->codec_fallback)
+    {
+        /* Change the power mode to Active until sco open is completed. */
+        bta_sys_busy(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+        /* Send +BCS to the peer */
+        bta_ag_send_bcs(p_scb, NULL);
+
+        /* Start timer to handle timeout */
+        p_scb->cn_timer.p_cback = (TIMER_CBACK*)&bta_ag_cn_timer_cback;
+        p_scb->cn_timer.param = (INT32)p_scb;
+        bta_sys_start_timer(&p_scb->cn_timer, 0, BTA_AG_CODEC_NEGO_TIMEOUT);
+    }
+    else
+    {
+        /* use same codec type as previous SCO connection, skip codec negotiation */
+        bta_ag_sco_codec_nego(p_scb, TRUE);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_event
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_sco_event(tBTA_AG_SCB *p_scb, UINT8 event)
+{
+    tBTA_AG_SCO_CB *p_sco = &bta_ag_cb.sco;
+#if (BTM_WBS_INCLUDED == TRUE )
+    tBTA_AG_SCB *p_cn_scb = NULL;   /* For codec negotiation */
+#endif
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    BT_HDR  *p_buf;
+#endif
+#if BTA_AG_SCO_DEBUG == TRUE
+    UINT8   in_state = p_sco->state;
+
+    APPL_TRACE_EVENT5("BTA ag sco evt (hdl 0x%04x): State %d (%s), Event %d (%s)",
+                        p_scb->sco_idx,
+                        p_sco->state, bta_ag_sco_state_str(p_sco->state),
+                        event, bta_ag_sco_evt_str(event));
+#else
+    APPL_TRACE_EVENT3("BTA ag sco evt (hdl 0x%04x): State %d, Event %d",
+                      p_scb->sco_idx, p_sco->state, event);
+#endif
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    if (event == BTA_AG_SCO_CI_DATA_E)
+    {
+        while (TRUE)
+        {
+            bta_dm_sco_co_out_data(&p_buf);
+            if (p_buf)
+            {
+                if (p_sco->state == BTA_AG_SCO_OPEN_ST)
+                    BTM_WriteScoData(p_sco->p_curr_scb->sco_idx, p_buf);
+                else
+                    GKI_freebuf(p_buf);
+            }
+            else
+                break;
+        }
+
+        return;
+    }
+#endif
+
+    switch (p_sco->state)
+    {
+        case BTA_AG_SCO_SHUTDOWN_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_SHUTDOWN_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_LISTEN_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection (Additional channel) */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    break;
+
+                case BTA_AG_SCO_OPEN_E:
+                    /* remove listening connection */
+                    bta_ag_remove_sco(p_scb, FALSE);
+
+#if (BTM_WBS_INCLUDED == TRUE )
+                    /* start codec negotiation */
+                    p_sco->state = BTA_AG_SCO_CODEC_ST;
+                    p_cn_scb = p_scb;
+#else
+                    /* create sco connection to peer */
+                    bta_ag_create_sco(p_scb, TRUE);
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+#endif
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* remove listening connection */
+                    bta_ag_remove_sco(p_scb, FALSE);
+
+                    if (p_scb == p_sco->p_curr_scb)
+                        p_sco->p_curr_scb = NULL;
+
+                    /* If last SCO instance then finish shutting down */
+                    if (!bta_ag_other_scb_open(p_scb))
+                    {
+                        p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
+                    }
+                    break;
+
+                case BTA_AG_SCO_CLOSE_E:
+                    /* remove listening connection */
+                    /* Ignore the event. We need to keep listening SCO for the active SLC */
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event);
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* sco failed; create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_LISTEN_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+#if (BTM_WBS_INCLUDED == TRUE )
+        case BTA_AG_SCO_CODEC_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection (Additional channel) */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    break;
+
+                case BTA_AG_SCO_CN_DONE_E:
+                    /* create sco connection to peer */
+                    bta_ag_create_sco(p_scb, TRUE);
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+                    break;
+
+                case BTA_AG_SCO_XFER_E:
+                    /* save xfer scb */
+                    p_sco->p_xfer_scb = p_scb;
+                    p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* remove listening connection */
+                    bta_ag_remove_sco(p_scb, FALSE);
+
+                    if (p_scb == p_sco->p_curr_scb)
+                        p_sco->p_curr_scb = NULL;
+
+                    /* If last SCO instance then finish shutting down */
+                    if (!bta_ag_other_scb_open(p_scb))
+                    {
+                        p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
+                    }
+                    break;
+
+                case BTA_AG_SCO_CLOSE_E:
+                    /* sco open is not started yet. just go back to listening */
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* sco failed; create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_CODEC_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+#endif
+
+        case BTA_AG_SCO_OPENING_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* second headset has now joined */
+                    /* create sco listen connection (Additional channel) */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        bta_ag_create_sco(p_scb, FALSE);
+                    }
+                    break;
+
+#if (BTM_WBS_INCLUDED == TRUE)
+                case BTA_AG_SCO_REOPEN_E:
+                    /* start codec negotiation */
+                    p_sco->state = BTA_AG_SCO_CODEC_ST;
+                    p_cn_scb = p_scb;
+                    break;
+#endif
+
+                case BTA_AG_SCO_XFER_E:
+                    /* save xfer scb */
+                    p_sco->p_xfer_scb = p_scb;
+                    p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
+                    break;
+
+                case BTA_AG_SCO_CLOSE_E:
+                    p_sco->state = BTA_AG_SCO_OPEN_CL_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* If not opening scb, just close it */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        /* remove listening connection */
+                        bta_ag_remove_sco(p_scb, FALSE);
+                    }
+                    else
+                        p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+
+                    break;
+
+                case BTA_AG_SCO_CONN_OPEN_E:
+                    p_sco->state = BTA_AG_SCO_OPEN_ST;
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* sco failed; create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_OPENING_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_OPEN_CL_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_XFER_E:
+                    /* save xfer scb */
+                    p_sco->p_xfer_scb = p_scb;
+
+                    p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
+                    break;
+
+                case BTA_AG_SCO_OPEN_E:
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* If not opening scb, just close it */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        /* remove listening connection */
+                        bta_ag_remove_sco(p_scb, FALSE);
+                    }
+                    else
+                        p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+
+                    break;
+
+                case BTA_AG_SCO_CONN_OPEN_E:
+                    /* close sco connection */
+                    bta_ag_remove_sco(p_scb, TRUE);
+
+                    p_sco->state = BTA_AG_SCO_CLOSING_ST;
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* sco failed; create sco listen connection */
+
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_CL_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_OPEN_XFER_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_CLOSE_E:
+                    /* close sco connection */
+                    bta_ag_remove_sco(p_scb, TRUE);
+
+                    p_sco->state = BTA_AG_SCO_CLOSING_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* remove all connection */
+                    bta_ag_remove_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* closed sco; place in listen mode and
+                       accept the transferred connection */
+                    bta_ag_create_sco(p_scb, FALSE);    /* Back into listen mode */
+
+                    /* Accept sco connection with xfer scb */
+                    bta_ag_sco_conn_rsp(p_sco->p_xfer_scb, &p_sco->conn_data);
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+                    p_sco->p_curr_scb = p_sco->p_xfer_scb;
+                    p_sco->cur_idx = p_sco->p_xfer_scb->sco_idx;
+                    p_sco->p_xfer_scb = NULL;
+                     break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_XFER_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_OPEN_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* second headset has now joined */
+                    /* create sco listen connection (Additional channel) */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        bta_ag_create_sco(p_scb, FALSE);
+                    }
+                    break;
+
+                case BTA_AG_SCO_XFER_E:
+                    /* close current sco connection */
+                    bta_ag_remove_sco(p_sco->p_curr_scb, TRUE);
+
+                    /* save xfer scb */
+                    p_sco->p_xfer_scb = p_scb;
+
+                    p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
+                    break;
+
+                case BTA_AG_SCO_CLOSE_E:
+                    /* close sco connection if active */
+                    if (bta_ag_remove_sco(p_scb, TRUE))
+                    {
+                        p_sco->state = BTA_AG_SCO_CLOSING_ST;
+                    }
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* remove all listening connections */
+                    bta_ag_remove_sco(p_scb, FALSE);
+
+                    /* If SCO was active on this scb, close it */
+                    if (p_scb == p_sco->p_curr_scb)
+                    {
+                        p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+                    }
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* peer closed sco; create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_OPEN_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_CLOSING_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection (Additional channel) */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        bta_ag_create_sco(p_scb, FALSE);
+                    }
+                    break;
+
+                case BTA_AG_SCO_OPEN_E:
+                    p_sco->state = BTA_AG_SCO_CLOSE_OP_ST;
+                    break;
+
+                case BTA_AG_SCO_XFER_E:
+                    /* save xfer scb */
+                    p_sco->p_xfer_scb = p_scb;
+
+                    p_sco->state = BTA_AG_SCO_CLOSE_XFER_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* If not closing scb, just close it */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        /* remove listening connection */
+                        bta_ag_remove_sco(p_scb, FALSE);
+                    }
+                    else
+                        p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* peer closed sco; create sco listen connection */
+                    bta_ag_create_sco(p_scb, FALSE);
+
+                    p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSING_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_CLOSE_OP_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_CLOSE_E:
+                    p_sco->state = BTA_AG_SCO_CLOSING_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+#if (BTM_WBS_INCLUDED == TRUE )
+                    /* start codec negotiation */
+                    p_sco->state = BTA_AG_SCO_CODEC_ST;
+                    p_cn_scb = p_scb;
+#else
+                    /* open sco connection */
+                    bta_ag_create_sco(p_scb, TRUE);
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+#endif
+                    break;
+
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection (Additional channel) */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        bta_ag_create_sco(p_scb, FALSE);
+                    }
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSE_OP_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_CLOSE_XFER_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_CONN_OPEN_E:
+                    /* close sco connection so headset can be transferred
+                       Probably entered this state from "opening state" */
+                    bta_ag_remove_sco(p_scb, TRUE);
+                    break;
+
+                case BTA_AG_SCO_CLOSE_E:
+                    /* clear xfer scb */
+                    p_sco->p_xfer_scb = NULL;
+
+                    p_sco->state = BTA_AG_SCO_CLOSING_ST;
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    /* clear xfer scb */
+                    p_sco->p_xfer_scb = NULL;
+
+                    p_sco->state = BTA_AG_SCO_SHUTTING_ST;
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* closed sco; place old sco in listen mode,
+                       take current sco out of listen, and
+                       create originating sco for current */
+                    bta_ag_create_sco(p_scb, FALSE);
+                    bta_ag_remove_sco(p_sco->p_xfer_scb, FALSE);
+
+#if (BTM_WBS_INCLUDED == TRUE )
+                    /* start codec negotiation */
+                    p_sco->state = BTA_AG_SCO_CODEC_ST;
+                    p_cn_scb = p_sco->p_xfer_scb;
+                    p_sco->p_xfer_scb = NULL;
+#else
+                    /* create sco connection to peer */
+                    bta_ag_create_sco(p_sco->p_xfer_scb, TRUE);
+                    p_sco->p_xfer_scb = NULL;
+                    p_sco->state = BTA_AG_SCO_OPENING_ST;
+#endif
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_CLOSE_XFER_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        case BTA_AG_SCO_SHUTTING_ST:
+            switch (event)
+            {
+                case BTA_AG_SCO_CONN_OPEN_E:
+                    /* close sco connection; wait for conn close event */
+                    bta_ag_remove_sco(p_scb, TRUE);
+                    break;
+
+                case BTA_AG_SCO_CONN_CLOSE_E:
+                    /* If last SCO instance then finish shutting down */
+                    if (!bta_ag_other_scb_open(p_scb))
+                    {
+                        p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
+                    }
+                    else    /* Other instance is still listening */
+                    {
+                        p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    }
+
+                    if (p_scb == p_sco->p_curr_scb)
+                    {
+                        p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+                        p_sco->p_curr_scb = NULL;
+                    }
+                    break;
+
+                case BTA_AG_SCO_LISTEN_E:
+                    /* create sco listen connection (Additional channel) */
+                    if (p_scb != p_sco->p_curr_scb)
+                    {
+                        bta_ag_create_sco(p_scb, FALSE);
+                    }
+                    break;
+
+                case BTA_AG_SCO_SHUTDOWN_E:
+                    if (!bta_ag_other_scb_open(p_scb))
+                    {
+                        p_sco->state = BTA_AG_SCO_SHUTDOWN_ST;
+                    }
+                    else    /* Other instance is still listening */
+                    {
+                        p_sco->state = BTA_AG_SCO_LISTEN_ST;
+                    }
+
+                    if (p_scb == p_sco->p_curr_scb)
+                    {
+                        p_sco->p_curr_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+                        p_sco->p_curr_scb = NULL;
+                    }
+                    break;
+
+                default:
+                    APPL_TRACE_WARNING1("BTA_AG_SCO_SHUTTING_ST: Ignoring event %d", event);
+                    break;
+            }
+            break;
+
+        default:
+            break;
+    }
+#if BTA_AG_SCO_DEBUG == TRUE
+    if (p_sco->state != in_state)
+    {
+        APPL_TRACE_EVENT3("BTA AG SCO State Change: [%s] -> [%s] after Event [%s]",
+                      bta_ag_sco_state_str(in_state),
+                      bta_ag_sco_state_str(p_sco->state),
+                      bta_ag_sco_evt_str(event));
+    }
+#endif
+
+#if (BTM_WBS_INCLUDED == TRUE )
+    if (p_cn_scb)
+    {
+        bta_ag_codec_negotiate(p_cn_scb);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_is_open
+**
+** Description      Check if sco is open for this scb.
+**
+**
+** Returns          TRUE if sco open for this scb, FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_ag_sco_is_open(tBTA_AG_SCB *p_scb)
+{
+    return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_ST) &&
+            (bta_ag_cb.sco.p_curr_scb == p_scb));
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_is_opening
+**
+** Description      Check if sco is in Opening state.
+**
+**
+** Returns          TRUE if sco is in Opening state for this scb, FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_ag_sco_is_opening(tBTA_AG_SCB *p_scb)
+{
+#if (BTM_WBS_INCLUDED == TRUE )
+    return (((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) ||
+            (bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST)) &&
+            (bta_ag_cb.sco.p_curr_scb == p_scb));
+#else
+    return ((bta_ag_cb.sco.state == BTA_AG_SCO_OPENING_ST) &&
+            (bta_ag_cb.sco.p_curr_scb == p_scb));
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_listen
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_listen(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    bta_ag_sco_event(p_scb, BTA_AG_SCO_LISTEN_E);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_open
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT8 event;
+
+    /* if another scb using sco, this is a transfer */
+    if (bta_ag_cb.sco.p_curr_scb != NULL && bta_ag_cb.sco.p_curr_scb != p_scb)
+    {
+        event = BTA_AG_SCO_XFER_E;
+    }
+    /* else it is an open */
+    else
+    {
+        event = BTA_AG_SCO_OPEN_E;
+    }
+
+    bta_ag_sco_event(p_scb, event);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_close
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    /* if scb is in use */
+#if (BTM_WBS_INCLUDED == TRUE )
+    /* sco_idx is not allocated in SCO_CODEC_ST, we still need to move to listening state. */
+    if ((p_scb->sco_idx != BTM_INVALID_SCO_INDEX) || (bta_ag_cb.sco.state == BTA_AG_SCO_CODEC_ST))
+#else
+    if (p_scb->sco_idx != BTM_INVALID_SCO_INDEX)
+#endif
+    {
+        APPL_TRACE_DEBUG1("bta_ag_sco_close: sco_inx = %d", p_scb->sco_idx);
+        bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E);
+    }
+}
+
+#if (BTM_WBS_INCLUDED == TRUE )
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_codec_nego
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_codec_nego(tBTA_AG_SCB *p_scb, BOOLEAN result)
+{
+    if(result == TRUE)
+    {
+        /* Subsequent sco connection will skip codec negotiation */
+        p_scb->codec_updated = FALSE;
+
+        bta_ag_sco_event(p_scb, BTA_AG_SCO_CN_DONE_E);
+    }
+    else    /* codec negotiation failed */
+        bta_ag_sco_event(p_scb, BTA_AG_SCO_CLOSE_E);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_shutdown
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_shutdown(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    bta_ag_sco_event(p_scb, BTA_AG_SCO_SHUTDOWN_E);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_conn_open
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_conn_open(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_OPEN_E);
+
+    bta_sys_sco_open(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+    bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_ON);
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    /* open SCO codec if SCO is routed through transport */
+    bta_dm_sco_co_open(bta_ag_scb_to_idx(p_scb), BTA_SCO_OUT_PKT_SIZE, BTA_AG_CI_SCO_DATA_EVT);
+#endif
+
+    /* call app callback */
+    bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_OPEN_EVT);
+
+    p_scb->retry_with_sco_only = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_conn_close
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_conn_close(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    UINT16 handle = bta_ag_scb_to_idx(p_scb);
+
+    /* clear current scb */
+    bta_ag_cb.sco.p_curr_scb = NULL;
+    p_scb->sco_idx = BTM_INVALID_SCO_INDEX;
+
+#if (BTM_WBS_INCLUDED == TRUE)
+    /* codec_fallback is set when AG is initiator and connection failed for mSBC. */
+    if (p_scb->codec_fallback && p_scb->svc_conn)
+    {
+        bta_ag_sco_event(p_scb, BTA_AG_SCO_REOPEN_E);
+    }
+    else if (p_scb->retry_with_sco_only && p_scb->svc_conn)
+    {
+        /* retry_with_sco_only is set when AG is initiator and connection failed for eSCO */
+        bta_ag_create_sco(p_scb, TRUE);
+    }
+#else
+    /* retry_with_sco_only, will be set only when AG is initiator
+    ** and AG is first trying to establish an eSCO connection */
+    if (p_scb->retry_with_sco_only && p_scb->svc_conn)
+    {
+        bta_ag_create_sco(p_scb, TRUE);
+    }
+#endif
+    else
+    {
+        /* Indicate if the closing of audio is because of transfer */
+        if (bta_ag_cb.sco.p_xfer_scb)
+            bta_ag_co_audio_state(handle, p_scb->app_id, BTA_AG_CO_AUD_STATE_OFF_XFER);
+        else
+            bta_ag_co_audio_state(handle, p_scb->app_id, BTA_AG_CO_AUD_STATE_OFF);
+
+        bta_ag_sco_event(p_scb, BTA_AG_SCO_CONN_CLOSE_E);
+
+        bta_sys_sco_close(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+        /* if av got suspended by this call, let it resume. */
+        /* In case call stays alive regardless of sco, av should not be affected. */
+        if(((p_scb->call_ind == BTA_AG_CALL_INACTIVE) && (p_scb->callsetup_ind == BTA_AG_CALLSETUP_NONE))
+            || (p_scb->post_sco == BTA_AG_POST_SCO_CALL_END))
+        {
+            bta_sys_sco_unuse(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+        }
+
+        /* call app callback */
+        bta_ag_cback_sco(p_scb, BTA_AG_AUDIO_CLOSE_EVT);
+    }
+    p_scb->retry_with_sco_only = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sco_conn_rsp
+**
+** Description      Process the SCO connection request
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sco_conn_rsp(tBTA_AG_SCB *p_scb, tBTM_ESCO_CONN_REQ_EVT_DATA *p_data)
+{
+    tBTM_ESCO_PARAMS    resp;
+    UINT8               hci_status = HCI_SUCCESS;
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    tBTA_CODEC_INFO     codec_info = {BTA_SCO_CODEC_PCM};
+    UINT32              pcm_sample_rate;
+#endif
+
+    if (bta_ag_cb.sco.state == BTA_AG_SCO_LISTEN_ST     ||
+        bta_ag_cb.sco.state == BTA_AG_SCO_CLOSE_XFER_ST ||
+        bta_ag_cb.sco.state == BTA_AG_SCO_OPEN_XFER_ST)
+    {
+        /* If script overrided sco parameter by BTA_CMD_SET_ESCO_PARAM */
+        if (bta_ag_cb.sco.param_updated)
+        {
+            resp = bta_ag_cb.sco.params;
+        }
+        else
+        {
+            resp.rx_bw = BTM_64KBITS_RATE;
+            resp.tx_bw = BTM_64KBITS_RATE;
+            resp.max_latency = 10;
+            resp.voice_contfmt = 0x60;
+            resp.retrans_effort = BTM_ESCO_RETRANS_POWER;
+
+            if (p_data->link_type == BTM_LINK_TYPE_SCO)
+            {
+                resp.packet_types = (BTM_SCO_LINK_ONLY_MASK          |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
+            }
+            else    /* Allow controller to use all types available except 5-slot EDR */
+            {
+                resp.packet_types = (BTM_SCO_LINK_ALL_PKT_MASK |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 |
+                                     BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
+            }
+        }
+
+        /* tell sys to stop av if any */
+        bta_sys_sco_use(BTA_ID_AG, p_scb->app_id, p_scb->peer_addr);
+
+        /* Allow any platform specific pre-SCO set up to take place */
+        bta_ag_co_audio_state(bta_ag_scb_to_idx(p_scb), p_scb->app_id, BTA_AG_CO_AUD_STATE_SETUP);
+
+#if (BTM_WBS_INCLUDED == TRUE )
+        /* When HS initiated SCO, it cannot be WBS. */
+        BTM_ConfigI2SPCM (BTM_SCO_CODEC_CVSD, (UINT8)HCI_BRCM_I2SPCM_IS_DEFAULT_ROLE, (UINT8)HCI_BRCM_I2SPCM_SAMPLE_DEFAULT, (UINT8)HCI_BRCM_I2SPCM_CLOCK_DEFAULT);
+#endif
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+        pcm_sample_rate = BTA_DM_SCO_SAMP_RATE_8K;
+
+        /* initialize SCO setup, no voice setting for AG, data rate <==> sample rate */
+        BTM_ConfigScoPath(bta_dm_sco_co_init(pcm_sample_rate, pcm_sample_rate, &codec_info, p_scb->app_id),
+            bta_ag_sco_read_cback, NULL, TRUE);
+#endif
+    }
+    else
+        hci_status = HCI_ERR_HOST_REJECT_DEVICE;
+
+#if (BTM_WBS_INCLUDED == TRUE )
+    /* If SCO open was initiated from HS, it must be CVSD */
+    p_scb->inuse_codec = BTA_AG_CODEC_NONE;
+#endif
+
+    BTM_EScoConnRsp(p_data->sco_inx, hci_status, &resp);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_ci_sco_data
+**
+** Description      Process the SCO data ready callin event
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_ci_sco_data(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+#if (BTM_SCO_HCI_INCLUDED == TRUE )
+    bta_ag_sco_event(p_scb, BTA_AG_SCO_CI_DATA_E);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_set_esco_param
+**
+** Description      Update esco parameters from script wrapper.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_set_esco_param(BOOLEAN set_reset, tBTM_ESCO_PARAMS *param)
+{
+    if(set_reset == FALSE)    /* reset the parameters to default */
+    {
+        bta_ag_cb.sco.param_updated = FALSE;
+        APPL_TRACE_DEBUG0("bta_ag_set_esco_param : Resetting ESCO parameters to default");
+    }
+    else
+    {
+        bta_ag_cb.sco.param_updated = TRUE;
+        bta_ag_cb.sco.params = *param;
+        APPL_TRACE_DEBUG0("bta_ag_set_esco_param : Setting ESCO parameters");
+    }
+}
+
+/*******************************************************************************
+**  Debugging functions
+*******************************************************************************/
+
+#if BTA_AG_SCO_DEBUG == TRUE
+static char *bta_ag_sco_evt_str(UINT8 event)
+{
+    switch (event)
+    {
+    case BTA_AG_SCO_LISTEN_E:
+        return "Listen Request";
+    case BTA_AG_SCO_OPEN_E:
+        return "Open Request";
+    case BTA_AG_SCO_XFER_E:
+        return "Transfer Request";
+#if (BTM_WBS_INCLUDED == TRUE )
+    case BTA_AG_SCO_CN_DONE_E:
+        return "Codec Negotiation Done";
+    case BTA_AG_SCO_REOPEN_E:
+        return "Reopen Request";
+#endif
+    case BTA_AG_SCO_CLOSE_E:
+        return "Close Request";
+    case BTA_AG_SCO_SHUTDOWN_E:
+        return "Shutdown Request";
+    case BTA_AG_SCO_CONN_OPEN_E:
+        return "Opened";
+    case BTA_AG_SCO_CONN_CLOSE_E:
+        return "Closed";
+    case BTA_AG_SCO_CI_DATA_E  :
+        return "Sco Data";
+    default:
+        return "Unknown SCO Event";
+    }
+}
+
+static char *bta_ag_sco_state_str(UINT8 state)
+{
+    switch (state)
+    {
+    case BTA_AG_SCO_SHUTDOWN_ST:
+        return "Shutdown";
+    case BTA_AG_SCO_LISTEN_ST:
+        return "Listening";
+#if (BTM_WBS_INCLUDED == TRUE )
+    case BTA_AG_SCO_CODEC_ST:
+        return "Codec Negotiation";
+#endif
+    case BTA_AG_SCO_OPENING_ST:
+        return "Opening";
+    case BTA_AG_SCO_OPEN_CL_ST:
+        return "Open while closing";
+    case BTA_AG_SCO_OPEN_XFER_ST:
+        return "Opening while Transferring";
+    case BTA_AG_SCO_OPEN_ST:
+        return "Open";
+    case BTA_AG_SCO_CLOSING_ST:
+        return "Closing";
+    case BTA_AG_SCO_CLOSE_OP_ST:
+        return "Close while Opening";
+    case BTA_AG_SCO_CLOSE_XFER_ST:
+        return "Close while Transferring";
+    case BTA_AG_SCO_SHUTTING_ST:
+        return "Shutting Down";
+    default:
+        return "Unknown SCO State";
+    }
+}
+
+#endif
diff --git a/bta/ag/bta_ag_sdp.c b/bta/ag/bta_ag_sdp.c
new file mode 100644
index 0000000..d708cf2
--- /dev/null
+++ b/bta/ag/bta_ag_sdp.c
@@ -0,0 +1,500 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the audio gateway functions performing SDP
+ *  operations.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_int.h"
+#include "sdp_api.h"
+#include "btm_api.h"
+#include "gki.h"
+
+/* Number of protocol elements in protocol element list. */
+#define BTA_AG_NUM_PROTO_ELEMS      2
+
+/* Number of elements in service class id list. */
+#define BTA_AG_NUM_SVC_ELEMS        2
+
+/* size of database for service discovery */
+#ifndef BTA_AG_DISC_BUF_SIZE
+#define BTA_AG_DISC_BUF_SIZE        GKI_MAX_BUF_SIZE
+#endif
+
+/* declare sdp callback functions */
+void bta_ag_sdp_cback_1(UINT16 status);
+void bta_ag_sdp_cback_2(UINT16 status);
+void bta_ag_sdp_cback_3(UINT16 status);
+
+/* SDP callback function table */
+typedef tSDP_DISC_CMPL_CB *tBTA_AG_SDP_CBACK;
+const tBTA_AG_SDP_CBACK bta_ag_sdp_cback_tbl[] =
+{
+    bta_ag_sdp_cback_1,
+    bta_ag_sdp_cback_2,
+    bta_ag_sdp_cback_3
+};
+
+/*******************************************************************************
+**
+** Function         bta_ag_sdp_cback
+**
+** Description      SDP callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ag_sdp_cback(UINT16 status, UINT8 idx)
+{
+    tBTA_AG_DISC_RESULT *p_buf;
+    UINT16              event;
+    tBTA_AG_SCB         *p_scb;
+
+    APPL_TRACE_DEBUG1("bta_ag_sdp_cback status:0x%x", status);
+
+    if ((p_scb = bta_ag_scb_by_idx(idx)) != NULL)
+    {
+        /* set event according to int/acp */
+        if (p_scb->role == BTA_AG_ACP)
+        {
+            event = BTA_AG_DISC_ACP_RES_EVT;
+        }
+        else
+        {
+            event = BTA_AG_DISC_INT_RES_EVT;
+        }
+
+        if ((p_buf = (tBTA_AG_DISC_RESULT *) GKI_getbuf(sizeof(tBTA_AG_DISC_RESULT))) != NULL)
+        {
+            p_buf->hdr.event = event;
+            p_buf->hdr.layer_specific = idx;
+            p_buf->status = status;
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sdp_cback_1 to 3
+**
+** Description      SDP callback functions.  Since there is no way to
+**                  distinguish scb from the callback we need separate
+**                  callbacks for each scb.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_sdp_cback_1(UINT16 status) {bta_ag_sdp_cback(status, 1);}
+void bta_ag_sdp_cback_2(UINT16 status) {bta_ag_sdp_cback(status, 2);}
+void bta_ag_sdp_cback_3(UINT16 status) {bta_ag_sdp_cback(status, 3);}
+
+/******************************************************************************
+**
+** Function         bta_ag_add_record
+**
+** Description      This function is called by a server application to add
+**                  HSP or HFP information to an SDP record.  Prior to
+**                  calling this function the application must call
+**                  SDP_CreateRecord() to create an SDP record.
+**
+** Returns          TRUE if function execution succeeded,
+**                  FALSE if function execution failed.
+**
+******************************************************************************/
+BOOLEAN bta_ag_add_record(UINT16 service_uuid, char *p_service_name, UINT8 scn,
+                          tBTA_AG_FEAT features, UINT32 sdp_handle)
+{
+    tSDP_PROTOCOL_ELEM  proto_elem_list[BTA_AG_NUM_PROTO_ELEMS];
+    UINT16              svc_class_id_list[BTA_AG_NUM_SVC_ELEMS];
+    UINT16              browse_list[] = {UUID_SERVCLASS_PUBLIC_BROWSE_GROUP};
+    UINT16              version;
+    UINT16              profile_uuid;
+    UINT8               network;
+    BOOLEAN             result = TRUE;
+    BOOLEAN             codec_supported = FALSE;
+    UINT8               buf[2];
+
+    APPL_TRACE_DEBUG1("bta_ag_add_record uuid: %x", service_uuid);
+
+    memset( proto_elem_list, 0 , BTA_AG_NUM_PROTO_ELEMS*sizeof(tSDP_PROTOCOL_ELEM));
+
+    /* add the protocol element sequence */
+    proto_elem_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+    proto_elem_list[0].num_params = 0;
+    proto_elem_list[1].protocol_uuid = UUID_PROTOCOL_RFCOMM;
+    proto_elem_list[1].num_params = 1;
+    proto_elem_list[1].params[0] = scn;
+    result &= SDP_AddProtocolList(sdp_handle, BTA_AG_NUM_PROTO_ELEMS, proto_elem_list);
+
+    /* add service class id list */
+    svc_class_id_list[0] = service_uuid;
+    svc_class_id_list[1] = UUID_SERVCLASS_GENERIC_AUDIO;
+    result &= SDP_AddServiceClassIdList(sdp_handle, BTA_AG_NUM_SVC_ELEMS, svc_class_id_list);
+
+    /* add profile descriptor list */
+    if (service_uuid == UUID_SERVCLASS_AG_HANDSFREE)
+    {
+        profile_uuid = UUID_SERVCLASS_HF_HANDSFREE;
+        version = HFP_VERSION_1_6;
+    }
+    else
+    {
+        profile_uuid = UUID_SERVCLASS_HEADSET;
+        version = HSP_VERSION_1_2;
+    }
+    result &= SDP_AddProfileDescriptorList(sdp_handle, profile_uuid, version);
+
+    /* add service name */
+    if (p_service_name != NULL && p_service_name[0] != 0)
+    {
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SERVICE_NAME, TEXT_STR_DESC_TYPE,
+                    (UINT32)(strlen(p_service_name)+1), (UINT8 *) p_service_name);
+    }
+
+    /* add features and network */
+    if (service_uuid == UUID_SERVCLASS_AG_HANDSFREE)
+    {
+        network = (features & BTA_AG_FEAT_REJECT) ? 1 : 0;
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_DATA_STORES_OR_NETWORK,
+                    UINT_DESC_TYPE, 1, &network);
+
+        if (features & BTA_AG_FEAT_CODEC)
+            codec_supported = TRUE;
+
+        features &= BTA_AG_SDP_FEAT_SPEC;
+
+        /* Codec bit position is different in SDP and in BRSF */
+        if (codec_supported)
+            features |= 0x0020;
+
+        UINT16_TO_BE_FIELD(buf, features);
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE, 2, buf);
+    }
+
+    /* add browse group list */
+    result &= SDP_AddUuidSequence(sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, browse_list);
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_create_records
+**
+** Description      Create SDP records for registered services.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_create_records(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    int                 i;
+    tBTA_SERVICE_MASK   services;
+
+    services = p_scb->reg_services >> BTA_HSP_SERVICE_ID;
+    for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++, services >>= 1)
+    {
+        /* if service is set in mask */
+        if (services & 1)
+        {
+            /* add sdp record if not already registered */
+            if (bta_ag_cb.profile[i].sdp_handle == 0)
+            {
+                bta_ag_cb.profile[i].sdp_handle = SDP_CreateRecord();
+                bta_ag_cb.profile[i].scn = BTM_AllocateSCN();
+                bta_ag_add_record(bta_ag_uuid[i], p_data->api_register.p_name[i],
+                    bta_ag_cb.profile[i].scn, p_data->api_register.features,
+                    bta_ag_cb.profile[i].sdp_handle);
+                bta_sys_add_uuid(bta_ag_uuid[i]);
+            }
+        }
+    }
+
+    p_scb->hsp_version = HSP_VERSION_1_2;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_del_records
+**
+** Description      Delete SDP records for any registered services.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_del_records(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    tBTA_AG_SCB         *p = &bta_ag_cb.scb[0];
+    tBTA_SERVICE_MASK   services;
+    tBTA_SERVICE_MASK   others = 0;
+    int                 i;
+
+    /* get services of all other registered servers */
+    for (i = 0; i < BTA_AG_NUM_IDX; i++, p++)
+    {
+        if (p_scb == p)
+        {
+            continue;
+        }
+
+        if (p->in_use && p->dealloc == FALSE)
+        {
+            others |= p->reg_services;
+        }
+    }
+
+    others >>= BTA_HSP_SERVICE_ID;
+    services = p_scb->reg_services >> BTA_HSP_SERVICE_ID;
+    for (i = 0; i < BTA_AG_NUM_IDX && services != 0; i++, services >>= 1, others >>= 1)
+    {
+        /* if service registered for this scb and not registered for any other scb */
+        if (((services & 1) == 1) && ((others & 1) == 0))
+        {
+            APPL_TRACE_DEBUG1("bta_ag_del_records %d", i);
+            if (bta_ag_cb.profile[i].sdp_handle != 0)
+            {
+                SDP_DeleteRecord(bta_ag_cb.profile[i].sdp_handle);
+                bta_ag_cb.profile[i].sdp_handle = 0;
+            }
+            BTM_FreeSCN(bta_ag_cb.profile[i].scn);
+            BTM_SecClrService(bta_ag_sec_id[i]);
+            bta_sys_remove_uuid(bta_ag_uuid[i]);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_sdp_find_attr
+**
+** Description      Process SDP discovery results to find requested attributes
+**                  for requested service.
+**
+**
+** Returns          TRUE if results found, FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_ag_sdp_find_attr(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK service)
+{
+    tSDP_DISC_REC       *p_rec = NULL;
+    tSDP_DISC_ATTR      *p_attr;
+    tSDP_PROTOCOL_ELEM  pe;
+    UINT16              uuid;
+    BOOLEAN             result = FALSE;
+
+    if (service & BTA_HFP_SERVICE_MASK)
+    {
+        uuid = UUID_SERVCLASS_HF_HANDSFREE;
+        p_scb->peer_version = HFP_VERSION_1_1;   /* Default version */
+    }
+    else if (service & BTA_HSP_SERVICE_MASK && p_scb->role == BTA_AG_INT)
+    {
+        uuid = UUID_SERVCLASS_HEADSET_HS;
+        p_scb->peer_version = 0x0100;   /* Default version */
+    }
+    else
+    {
+        return result;
+    }
+
+    /* loop through all records we found */
+    while (TRUE)
+    {
+        /* get next record; if none found, we're done */
+        if ((p_rec = SDP_FindServiceInDb(p_scb->p_disc_db, uuid, p_rec)) == NULL)
+        {
+            if (uuid == UUID_SERVCLASS_HEADSET_HS)
+            {
+                /* Search again in case the peer device is HSP v1.0 */
+                uuid = UUID_SERVCLASS_HEADSET;
+                if ((p_rec = SDP_FindServiceInDb(p_scb->p_disc_db, uuid, p_rec)) == NULL)
+                {
+                    break;
+                }
+            }
+            else
+                break;
+        }
+
+        /* get scn from proto desc list if initiator */
+        if (p_scb->role == BTA_AG_INT)
+        {
+            if (SDP_FindProtocolListElemInRec(p_rec, UUID_PROTOCOL_RFCOMM, &pe))
+            {
+                p_scb->peer_scn = (UINT8) pe.params[0];
+            }
+            else
+            {
+                continue;
+            }
+        }
+
+        /* get profile version (if failure, version parameter is not updated) */
+        SDP_FindProfileVersionInRec(p_rec, uuid, &p_scb->peer_version);
+
+        /* get features if HFP */
+        if (service & BTA_HFP_SERVICE_MASK)
+        {
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_SUPPORTED_FEATURES)) != NULL)
+            {
+                /* Found attribute. Get value. */
+                /* There might be race condition between SDP and BRSF.  */
+                /* Do not update if we already received BRSF.           */
+                if (p_scb->peer_features == 0)
+                    p_scb->peer_features = p_attr->attr_value.v.u16;
+            }
+        }
+        else    /* HSP */
+        {
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_REMOTE_AUDIO_VOLUME_CONTROL)) != NULL)
+            {
+                /* Remote volume control of HSP */
+                if (p_attr->attr_value.v.u8)
+                    p_scb->peer_features |= BTA_AG_PEER_FEAT_VOL;
+                else
+                    p_scb->peer_features &= ~BTA_AG_PEER_FEAT_VOL;
+            }
+
+        }
+
+        /* found what we needed */
+        result = TRUE;
+        break;
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_do_disc
+**
+** Description      Do service discovery.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_do_disc(tBTA_AG_SCB *p_scb, tBTA_SERVICE_MASK service)
+{
+    tSDP_UUID       uuid_list[2];
+    UINT16          num_uuid = 1;
+    UINT16          attr_list[4];
+    UINT8           num_attr;
+    BOOLEAN         db_inited = FALSE;
+
+    /* HFP initiator; get proto list and features */
+    if (service & BTA_HFP_SERVICE_MASK && p_scb->role == BTA_AG_INT)
+    {
+        attr_list[0] = ATTR_ID_SERVICE_CLASS_ID_LIST;
+        attr_list[1] = ATTR_ID_PROTOCOL_DESC_LIST;
+        attr_list[2] = ATTR_ID_BT_PROFILE_DESC_LIST;
+        attr_list[3] = ATTR_ID_SUPPORTED_FEATURES;
+        num_attr = 4;
+        uuid_list[0].uu.uuid16 = UUID_SERVCLASS_HF_HANDSFREE;
+    }
+    /* HFP acceptor; get features */
+    else if (service & BTA_HFP_SERVICE_MASK && p_scb->role == BTA_AG_ACP)
+    {
+        attr_list[0] = ATTR_ID_SERVICE_CLASS_ID_LIST;
+        attr_list[1] = ATTR_ID_BT_PROFILE_DESC_LIST;
+        attr_list[2] = ATTR_ID_SUPPORTED_FEATURES;
+        num_attr = 3;
+        uuid_list[0].uu.uuid16 = UUID_SERVCLASS_HF_HANDSFREE;
+    }
+    /* HSP initiator; get proto list */
+    else if (service & BTA_HSP_SERVICE_MASK && p_scb->role == BTA_AG_INT)
+    {
+        attr_list[0] = ATTR_ID_SERVICE_CLASS_ID_LIST;
+        attr_list[1] = ATTR_ID_PROTOCOL_DESC_LIST;
+        attr_list[2] = ATTR_ID_BT_PROFILE_DESC_LIST;
+        attr_list[3] = ATTR_ID_REMOTE_AUDIO_VOLUME_CONTROL;
+        num_attr = 4;
+
+        uuid_list[0].uu.uuid16 = UUID_SERVCLASS_HEADSET;        /* Legacy from HSP v1.0 */
+        if (p_scb->hsp_version >= HSP_VERSION_1_2)
+        {
+            uuid_list[1].uu.uuid16 = UUID_SERVCLASS_HEADSET_HS;
+            num_uuid = 2;
+        }
+    }
+    /* HSP acceptor; no discovery */
+    else
+    {
+        return;
+    }
+
+    /* allocate buffer for sdp database */
+    p_scb->p_disc_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(BTA_AG_DISC_BUF_SIZE);
+
+    if(p_scb->p_disc_db)
+    {
+        /* set up service discovery database; attr happens to be attr_list len */
+        uuid_list[0].len = LEN_UUID_16;
+        uuid_list[1].len = LEN_UUID_16;
+        db_inited = SDP_InitDiscoveryDb(p_scb->p_disc_db, BTA_AG_DISC_BUF_SIZE, num_uuid,
+                            uuid_list, num_attr, attr_list);
+    }
+
+    if(db_inited)
+    {
+        /*Service discovery not initiated */
+        db_inited = SDP_ServiceSearchAttributeRequest(p_scb->peer_addr, p_scb->p_disc_db,
+                                      bta_ag_sdp_cback_tbl[bta_ag_scb_to_idx(p_scb) - 1]);
+    }
+
+    if(!db_inited)
+    {
+        /*free discover db */
+        bta_ag_free_db(p_scb, NULL);
+        /* sent failed event */
+        bta_ag_sm_execute(p_scb, BTA_AG_DISC_FAIL_EVT, NULL);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_free_db
+**
+** Description      Free discovery database.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_free_db(tBTA_AG_SCB *p_scb, tBTA_AG_DATA *p_data)
+{
+    if (p_scb->p_disc_db != NULL)
+    {
+        GKI_freebuf(p_scb->p_disc_db);
+        p_scb->p_disc_db = NULL;
+    }
+}
diff --git a/bta/ar/bta_ar.c b/bta/ar/bta_ar.c
new file mode 100644
index 0000000..89b732a
--- /dev/null
+++ b/bta/ar/bta_ar.c
@@ -0,0 +1,348 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation for the audio/video registration module.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bta_ar_api.h"
+#include "bta_ar_int.h"
+
+
+/* AV control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_AR_CB  bta_ar_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ar_id
+**
+** Description      This function maps sys_id to ar id mask.
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_ar_id(tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = 0;
+    if (sys_id == BTA_ID_AV)
+    {
+        mask = BTA_AR_AV_MASK;
+    }
+    else if (sys_id == BTA_ID_AVK)
+    {
+        mask = BTA_AR_AVK_MASK;
+    }
+
+    return mask;
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_init
+**
+** Description      This function is called to register to AVDTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_init(void)
+{
+    /* initialize control block */
+    memset(&bta_ar_cb, 0, sizeof(tBTA_AR_CB));
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_reg_avdt
+**
+** Description      This function is called to register to AVDTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_ar_avdt_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    /* route the AVDT registration callback to av or avk */
+    if (bta_ar_cb.p_av_conn_cback)
+        (*bta_ar_cb.p_av_conn_cback)(handle, bd_addr, event, p_data);
+    if (bta_ar_cb.p_avk_conn_cback)
+        (*bta_ar_cb.p_avk_conn_cback)(handle, bd_addr, event, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_reg_avdt
+**
+** Description      AR module registration to AVDT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_reg_avdt(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback, tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = 0;
+
+    if (sys_id == BTA_ID_AV)
+    {
+        bta_ar_cb.p_av_conn_cback = p_cback;
+        mask = BTA_AR_AV_MASK;
+    }
+    else if (sys_id == BTA_ID_AVK)
+    {
+        bta_ar_cb.p_avk_conn_cback = p_cback;
+        mask = BTA_AR_AVK_MASK;
+    }
+#if (BTA_AR_DEBUG == TRUE)
+    else
+    {
+        APPL_TRACE_ERROR1("bta_ar_reg_avdt: the registration is from wrong sys_id:%d", sys_id);
+    }
+#endif
+
+    if (mask)
+    {
+        if (bta_ar_cb.avdt_registered == 0)
+        {
+            AVDT_Register(p_reg, bta_ar_avdt_cback);
+        }
+        bta_ar_cb.avdt_registered |= mask;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_dereg_avdt
+**
+** Description      This function is called to de-register from AVDTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_dereg_avdt(tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = 0;
+
+    if (sys_id == BTA_ID_AV)
+    {
+        bta_ar_cb.p_av_conn_cback = NULL;
+        mask = BTA_AR_AV_MASK;
+    }
+    else if (sys_id == BTA_ID_AVK)
+    {
+        bta_ar_cb.p_avk_conn_cback = NULL;
+        mask = BTA_AR_AVK_MASK;
+    }
+    bta_ar_cb.avdt_registered &= ~mask;
+
+    if (bta_ar_cb.avdt_registered == 0)
+        AVDT_Deregister();
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_avdt_conn
+**
+** Description      This function is called to let ar know that some AVDTP profile
+**                  is connected for this sys_id.
+**                  If the other sys modules started a timer for PENDING_EVT,
+**                  the timer can be stopped now.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_avdt_conn(tBTA_SYS_ID sys_id, BD_ADDR bd_addr)
+{
+    UINT8       event = BTA_AR_AVDT_CONN_EVT;
+    tAVDT_CTRL  data;
+
+    if (sys_id == BTA_ID_AV)
+    {
+        if (bta_ar_cb.p_avk_conn_cback)
+        {
+            (*bta_ar_cb.p_avk_conn_cback)(0, bd_addr, event, &data);
+        }
+    }
+    else if (sys_id == BTA_ID_AVK)
+    {
+        if (bta_ar_cb.p_av_conn_cback)
+        {
+            (*bta_ar_cb.p_av_conn_cback)(0, bd_addr, event, &data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_reg_avct
+**
+** Description      This function is called to register to AVCTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_reg_avct(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask, tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = bta_ar_id (sys_id);
+
+    if (mask)
+    {
+        if (bta_ar_cb.avct_registered == 0)
+        {
+            AVCT_Register(mtu, mtu_br, sec_mask);
+        }
+        bta_ar_cb.avct_registered |= mask;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_ar_dereg_avct
+**
+** Description      This function is called to deregister from AVCTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ar_dereg_avct(tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = bta_ar_id (sys_id);
+
+    bta_ar_cb.avct_registered &= ~mask;
+
+    if (bta_ar_cb.avct_registered == 0)
+        AVCT_Deregister();
+}
+
+/******************************************************************************
+**
+** Function         bta_ar_reg_avrc
+**
+** Description      This function is called to register an SDP record for AVRCP.
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ar_reg_avrc(UINT16 service_uuid, char *service_name, char *provider_name,
+					 UINT16 categories, tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = bta_ar_id (sys_id);
+    UINT8   temp[8], *p;
+
+    if (!mask || !categories)
+        return;
+
+    if (service_uuid == UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+    {
+        if (bta_ar_cb.sdp_tg_handle == 0)
+        {
+            bta_ar_cb.tg_registered = mask;
+            bta_ar_cb.sdp_tg_handle = SDP_CreateRecord();
+            AVRC_AddRecord(service_uuid, service_name, provider_name, categories, bta_ar_cb.sdp_tg_handle);
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+            bta_sys_add_uuid(service_uuid);
+#endif
+        }
+        /* only one TG is allowed (first-come, first-served).
+         * If sdp_tg_handle is non-0, ignore this request */
+    }
+    else if ((service_uuid == UUID_SERVCLASS_AV_REMOTE_CONTROL) || (service_uuid == UUID_SERVCLASS_AV_REM_CTRL_CONTROL))
+    {
+        bta_ar_cb.ct_categories [mask - 1] = categories;
+        categories = bta_ar_cb.ct_categories[0]|bta_ar_cb.ct_categories[1];
+        if (bta_ar_cb.sdp_ct_handle == 0)
+        {
+            bta_ar_cb.sdp_ct_handle = SDP_CreateRecord();
+            AVRC_AddRecord(service_uuid, service_name, provider_name, categories, bta_ar_cb.sdp_ct_handle);
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+            bta_sys_add_uuid(service_uuid);
+#endif
+        }
+        else
+        {
+            /* multiple CTs are allowed.
+             * Change supported categories on the second one */
+            p = temp;
+            UINT16_TO_BE_STREAM(p, categories);
+            SDP_AddAttribute(bta_ar_cb.sdp_ct_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE,
+                      (UINT32)2, (UINT8*)temp);
+        }
+    }
+}
+
+/******************************************************************************
+**
+** Function         bta_ar_dereg_avrc
+**
+** Description      This function is called to de-register/delete an SDP record for AVRCP.
+**
+** Returns          void
+**
+******************************************************************************/
+void bta_ar_dereg_avrc(UINT16 service_uuid, tBTA_SYS_ID sys_id)
+{
+    UINT8   mask = bta_ar_id (sys_id);
+    UINT16  categories = 0;
+    UINT8   temp[8], *p;
+
+    if (!mask)
+        return;
+
+    if (service_uuid == UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+    {
+        if (bta_ar_cb.sdp_tg_handle && mask == bta_ar_cb.tg_registered)
+        {
+            bta_ar_cb.tg_registered = 0;
+            SDP_DeleteRecord(bta_ar_cb.sdp_tg_handle);
+            bta_ar_cb.sdp_tg_handle = 0;
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+            bta_sys_remove_uuid(service_uuid);
+#endif
+        }
+    }
+    else if (service_uuid == UUID_SERVCLASS_AV_REMOTE_CONTROL)
+    {
+        if (bta_ar_cb.sdp_ct_handle)
+        {
+            bta_ar_cb.ct_categories [mask - 1] = 0;
+            categories = bta_ar_cb.ct_categories[0]|bta_ar_cb.ct_categories[1];
+            if (!categories)
+            {
+                /* no CT is still registered - cleaup */
+                SDP_DeleteRecord(bta_ar_cb.sdp_ct_handle);
+                bta_ar_cb.sdp_ct_handle = 0;
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+                bta_sys_remove_uuid(service_uuid);
+#endif
+            }
+            else
+            {
+                /* change supported categories to the remaning one */
+                p = temp;
+                UINT16_TO_BE_STREAM(p, categories);
+                SDP_AddAttribute(bta_ar_cb.sdp_ct_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE,
+                          (UINT32)2, (UINT8*)temp);
+            }
+        }
+    }
+
+}
diff --git a/bta/ar/bta_ar_int.h b/bta/ar/bta_ar_int.h
new file mode 100644
index 0000000..d230448
--- /dev/null
+++ b/bta/ar/bta_ar_int.h
@@ -0,0 +1,64 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA audio/video registration
+ *  module.
+ *
+ ******************************************************************************/
+#ifndef BTA_AR_INT_H
+#define BTA_AR_INT_H
+
+#include "bta_av_api.h"
+
+
+#ifndef BTA_AR_DEBUG
+#define BTA_AR_DEBUG    FALSE
+#endif
+
+#define BTA_AR_AV_MASK      0x01
+#define BTA_AR_AVK_MASK     0x02
+
+/* data associated with BTA_AR */
+typedef struct
+{
+    tAVDT_CTRL_CBACK *p_av_conn_cback;       /* av connection callback function */
+    tAVDT_CTRL_CBACK *p_avk_conn_cback;      /* avk connection callback function */
+    UINT8           avdt_registered;
+    UINT8           avct_registered;
+	UINT32          sdp_tg_handle;
+	UINT32          sdp_ct_handle;
+    UINT16          ct_categories[2];
+    UINT8           tg_registered;
+    tBTA_AV_HNDL    hndl;       /* Handle associated with the stream that rejected the connection. */
+} tBTA_AR_CB;
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* control block declaration */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_AR_CB bta_ar_cb;
+#else
+extern tBTA_AR_CB *bta_ar_cb_ptr;
+#define bta_ar_cb (*bta_ar_cb_ptr)
+#endif
+
+#endif /* BTA_AR_INT_H */
diff --git a/bta/av/bta_av_aact.c b/bta/av/bta_av_aact.c
new file mode 100644
index 0000000..741a5a0
--- /dev/null
+++ b/bta/av/bta_av_aact.c
@@ -0,0 +1,2733 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains action functions for advanced audio/video stream
+ *  state machine. these functions are shared by both audio and video
+ *  streams.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#if defined(BTA_AV_INCLUDED) && (BTA_AV_INCLUDED == TRUE)
+
+#include <string.h>
+#include "bta_av_int.h"
+#include "avdt_api.h"
+#include "bd.h"
+#include "utl.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#include "bta_ar_api.h"
+#endif
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* the delay time in milliseconds to start service discovery on AVRCP */
+#ifndef BTA_AV_RC_DISC_TIME_VAL
+#define BTA_AV_RC_DISC_TIME_VAL     3500
+#endif
+
+/* the timer in milliseconds to guard against link busy and AVDT_CloseReq failed to be sent */
+#ifndef BTA_AV_CLOSE_REQ_TIME_VAL
+#define BTA_AV_CLOSE_REQ_TIME_VAL   4000
+#endif
+
+/* number to retry on reconfigure failure - some headsets requirs this number to be more than 1 */
+#ifndef BTA_AV_RECONFIG_RETRY
+#define BTA_AV_RECONFIG_RETRY       6
+#endif
+
+/* state machine states */
+enum
+{
+    BTA_AV_INIT_SST,
+    BTA_AV_INCOMING_SST,
+    BTA_AV_OPENING_SST,
+    BTA_AV_OPEN_SST,
+    BTA_AV_RCFG_SST,
+    BTA_AV_CLOSING_SST
+};
+
+
+/* the call out functions for audio stream */
+const tBTA_AV_CO_FUNCTS bta_av_a2d_cos =
+{
+    bta_av_co_audio_init,
+    bta_av_co_audio_disc_res,
+    bta_av_co_audio_getconfig,
+    bta_av_co_audio_setconfig,
+    bta_av_co_audio_open,
+    bta_av_co_audio_close,
+    bta_av_co_audio_start,
+    bta_av_co_audio_stop,
+    bta_av_co_audio_src_data_path,
+    bta_av_co_audio_delay
+};
+
+/* ssm action functions for audio stream */
+const tBTA_AV_SACT bta_av_a2d_action[] =
+{
+    bta_av_do_disc_a2d,     /* BTA_AV_DO_DISC  */
+    bta_av_cleanup,         /* BTA_AV_CLEANUP */
+    bta_av_free_sdb,        /* BTA_AV_FREE_SDB */
+    bta_av_config_ind,      /* BTA_AV_CONFIG_IND */
+    bta_av_disconnect_req,  /* BTA_AV_DISCONNECT_REQ */
+    bta_av_security_req,    /* BTA_AV_SECURITY_REQ */
+    bta_av_security_rsp,    /* BTA_AV_SECURITY_RSP */
+    bta_av_setconfig_rsp,   /* BTA_AV_SETCONFIG_RSP */
+    bta_av_st_rc_timer,     /* BTA_AV_ST_RC_TIMER */
+    bta_av_str_opened,      /* BTA_AV_STR_OPENED */
+    bta_av_security_ind,    /* BTA_AV_SECURITY_IND */
+    bta_av_security_cfm,    /* BTA_AV_SECURITY_CFM */
+    bta_av_do_close,        /* BTA_AV_DO_CLOSE */
+    bta_av_connect_req,     /* BTA_AV_CONNECT_REQ */
+    bta_av_sdp_failed,      /* BTA_AV_SDP_FAILED */
+    bta_av_disc_results,    /* BTA_AV_DISC_RESULTS */
+    bta_av_disc_res_as_acp, /* BTA_AV_DISC_RES_AS_ACP */
+    bta_av_open_failed,     /* BTA_AV_OPEN_FAILED */
+    bta_av_getcap_results,  /* BTA_AV_GETCAP_RESULTS */
+    bta_av_setconfig_rej,   /* BTA_AV_SETCONFIG_REJ */
+    bta_av_discover_req,    /* BTA_AV_DISCOVER_REQ */
+    bta_av_conn_failed,     /* BTA_AV_CONN_FAILED */
+    bta_av_do_start,        /* BTA_AV_DO_START */
+    bta_av_str_stopped,     /* BTA_AV_STR_STOPPED */
+    bta_av_reconfig,        /* BTA_AV_RECONFIG */
+    bta_av_data_path,       /* BTA_AV_DATA_PATH */
+    bta_av_start_ok,        /* BTA_AV_START_OK */
+    bta_av_start_failed,    /* BTA_AV_START_FAILED */
+    bta_av_str_closed,      /* BTA_AV_STR_CLOSED */
+    bta_av_clr_cong,        /* BTA_AV_CLR_CONG */
+    bta_av_suspend_cfm,     /* BTA_AV_SUSPEND_CFM */
+    bta_av_rcfg_str_ok,     /* BTA_AV_RCFG_STR_OK */
+    bta_av_rcfg_failed,     /* BTA_AV_RCFG_FAILED */
+    bta_av_rcfg_connect,    /* BTA_AV_RCFG_CONNECT */
+    bta_av_rcfg_discntd,    /* BTA_AV_RCFG_DISCNTD */
+    bta_av_suspend_cont,    /* BTA_AV_SUSPEND_CONT */
+    bta_av_rcfg_cfm,        /* BTA_AV_RCFG_CFM */
+    bta_av_rcfg_open,       /* BTA_AV_RCFG_OPEN */
+    bta_av_security_rej,    /* BTA_AV_SECURITY_REJ */
+    bta_av_open_rc,         /* BTA_AV_OPEN_RC */
+    bta_av_chk_2nd_start,   /* BTA_AV_CHK_2ND_START */
+    bta_av_save_caps,       /* BTA_AV_SAVE_CAPS */
+    bta_av_set_use_rc,      /* BTA_AV_SET_USE_RC */
+    bta_av_cco_close,       /* BTA_AV_CCO_CLOSE */
+    bta_av_switch_role,     /* BTA_AV_SWITCH_ROLE */
+    bta_av_role_res,        /* BTA_AV_ROLE_RES */
+    bta_av_delay_co,        /* BTA_AV_DELAY_CO */
+    bta_av_open_at_inc,     /* BTA_AV_OPEN_AT_INC */
+    NULL
+};
+
+/* these tables translate AVDT events to SSM events */
+static const UINT16 bta_av_stream_evt_ok[] = {
+    BTA_AV_STR_DISC_OK_EVT,         /* AVDT_DISCOVER_CFM_EVT */
+    BTA_AV_STR_GETCAP_OK_EVT,       /* AVDT_GETCAP_CFM_EVT */
+    BTA_AV_STR_OPEN_OK_EVT,         /* AVDT_OPEN_CFM_EVT */
+    BTA_AV_STR_OPEN_OK_EVT,         /* AVDT_OPEN_IND_EVT */
+    BTA_AV_STR_CONFIG_IND_EVT,      /* AVDT_CONFIG_IND_EVT */
+    BTA_AV_STR_START_OK_EVT,        /* AVDT_START_CFM_EVT */
+    BTA_AV_STR_START_OK_EVT,        /* AVDT_START_IND_EVT */
+    BTA_AV_STR_SUSPEND_CFM_EVT,     /* AVDT_SUSPEND_CFM_EVT */
+    BTA_AV_STR_SUSPEND_CFM_EVT,     /* AVDT_SUSPEND_IND_EVT */
+    BTA_AV_STR_CLOSE_EVT,           /* AVDT_CLOSE_CFM_EVT */
+    BTA_AV_STR_CLOSE_EVT,           /* AVDT_CLOSE_IND_EVT */
+    BTA_AV_STR_RECONFIG_CFM_EVT,    /* AVDT_RECONFIG_CFM_EVT */
+    0,                              /* AVDT_RECONFIG_IND_EVT */
+    BTA_AV_STR_SECURITY_CFM_EVT,    /* AVDT_SECURITY_CFM_EVT */
+    BTA_AV_STR_SECURITY_IND_EVT,    /* AVDT_SECURITY_IND_EVT */
+    BTA_AV_STR_WRITE_CFM_EVT,       /* AVDT_WRITE_CFM_EVT */
+    BTA_AV_AVDT_CONNECT_EVT,        /* AVDT_CONNECT_IND_EVT */
+    BTA_AV_AVDT_DISCONNECT_EVT,     /* AVDT_DISCONNECT_IND_EVT */
+#if (AVDT_REPORTING == TRUE)
+    BTA_AV_AVDT_RPT_CONN_EVT,       /* AVDT_REPORT_CONN_EVT */
+    BTA_AV_AVDT_RPT_CONN_EVT,       /* AVDT_REPORT_DISCONN_EVT */
+#endif
+    BTA_AV_AVDT_DELAY_RPT_EVT,      /* AVDT_DELAY_REPORT_EVT */
+    0                               /* AVDT_DELAY_REPORT_CFM_EVT */
+};
+
+static const UINT16 bta_av_stream_evt_fail[] = {
+    BTA_AV_STR_DISC_FAIL_EVT,       /* AVDT_DISCOVER_CFM_EVT */
+    BTA_AV_STR_GETCAP_FAIL_EVT,     /* AVDT_GETCAP_CFM_EVT */
+    BTA_AV_STR_OPEN_FAIL_EVT,       /* AVDT_OPEN_CFM_EVT */
+    BTA_AV_STR_OPEN_OK_EVT,         /* AVDT_OPEN_IND_EVT */
+    BTA_AV_STR_CONFIG_IND_EVT,      /* AVDT_CONFIG_IND_EVT */
+    BTA_AV_STR_START_FAIL_EVT,      /* AVDT_START_CFM_EVT */
+    BTA_AV_STR_START_OK_EVT,        /* AVDT_START_IND_EVT */
+    BTA_AV_STR_SUSPEND_CFM_EVT,     /* AVDT_SUSPEND_CFM_EVT */
+    BTA_AV_STR_SUSPEND_CFM_EVT,     /* AVDT_SUSPEND_IND_EVT */
+    BTA_AV_STR_CLOSE_EVT,           /* AVDT_CLOSE_CFM_EVT */
+    BTA_AV_STR_CLOSE_EVT,           /* AVDT_CLOSE_IND_EVT */
+    BTA_AV_STR_RECONFIG_CFM_EVT,    /* AVDT_RECONFIG_CFM_EVT */
+    0,                              /* AVDT_RECONFIG_IND_EVT */
+    BTA_AV_STR_SECURITY_CFM_EVT,    /* AVDT_SECURITY_CFM_EVT */
+    BTA_AV_STR_SECURITY_IND_EVT,    /* AVDT_SECURITY_IND_EVT */
+    BTA_AV_STR_WRITE_CFM_EVT,       /* AVDT_WRITE_CFM_EVT */
+    BTA_AV_AVDT_CONNECT_EVT,        /* AVDT_CONNECT_IND_EVT */
+    BTA_AV_AVDT_DISCONNECT_EVT,     /* AVDT_DISCONNECT_IND_EVT */
+#if (AVDT_REPORTING == TRUE)
+    BTA_AV_AVDT_RPT_CONN_EVT,       /* AVDT_REPORT_CONN_EVT */
+    BTA_AV_AVDT_RPT_CONN_EVT,       /* AVDT_REPORT_DISCONN_EVT */
+#endif
+    BTA_AV_AVDT_DELAY_RPT_EVT,      /* AVDT_DELAY_REPORT_EVT */
+    0                               /* AVDT_DELAY_REPORT_CFM_EVT */
+};
+
+static void bta_av_stream0_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+static void bta_av_stream1_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+#if BTA_AV_NUM_STRS > 2
+static void bta_av_stream2_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+#endif
+#if BTA_AV_NUM_STRS > 3
+static void bta_av_stream3_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+#endif
+#if BTA_AV_NUM_STRS > 4
+static void bta_av_stream4_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+#endif
+#if BTA_AV_NUM_STRS > 5
+static void bta_av_stream5_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+#endif
+/* the array of callback functions to receive events from AVDT control channel */
+tAVDT_CTRL_CBACK * const bta_av_dt_cback[] =
+{
+    bta_av_stream0_cback
+    ,bta_av_stream1_cback
+#if BTA_AV_NUM_STRS > 2
+    ,bta_av_stream2_cback
+#endif
+#if BTA_AV_NUM_STRS > 3
+    ,bta_av_stream3_cback
+#endif
+#if BTA_AV_NUM_STRS > 4
+    ,bta_av_stream4_cback
+#endif
+#if BTA_AV_NUM_STRS > 5
+    ,bta_av_stream5_cback
+#endif
+};
+
+/*******************************************************************************
+**
+** Function         bta_av_save_addr
+**
+** Description      copy the bd_addr and maybe reset the supported flags
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_save_addr(tBTA_AV_SCB *p_scb, const BD_ADDR b)
+{
+    APPL_TRACE_DEBUG2("bta_av_save_addr r:%d, s:%d",
+        p_scb->recfg_sup, p_scb->suspend_sup);
+    if(bdcmp(p_scb->peer_addr, b) != 0)
+    {
+        APPL_TRACE_ERROR0("reset flags");
+        /* a new addr, reset the supported flags */
+        p_scb->recfg_sup    = TRUE;
+        p_scb->suspend_sup  = TRUE;
+    }
+
+    /* do this copy anyway, just in case the first addr matches
+     * the control block one by accident */
+    bdcpy(p_scb->peer_addr, b);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_st_rc_timer
+**
+** Description      start the AVRC timer if no RC connection & CT is supported &
+**                  RC is used or
+**                  as ACP (we do not really know if we want AVRC)
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_st_rc_timer(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+
+    APPL_TRACE_DEBUG2("bta_av_st_rc_timer rc_handle:%d, use_rc: %d",
+        p_scb->rc_handle, p_scb->use_rc);
+    /* for outgoing RC connection as INT/CT */
+    if( (p_scb->rc_handle == BTA_AV_RC_HANDLE_NONE) &&
+        /*(bta_av_cb.features & BTA_AV_FEAT_RCCT) &&*/
+        (p_scb->use_rc == TRUE || (p_scb->role & BTA_AV_ROLE_AD_ACP)) )
+    {
+        if ((p_scb->wait & BTA_AV_WAIT_ROLE_SW_BITS) == 0)
+            bta_sys_start_timer(&p_scb->timer, BTA_AV_AVRC_TIMER_EVT, BTA_AV_RC_DISC_TIME_VAL);
+        else
+            p_scb->wait |= BTA_AV_WAIT_CHECK_RC;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_next_getcap
+**
+** Description      The function gets the capabilities of the next available
+**                  stream found in the discovery results.
+**
+** Returns          TRUE if we sent request to AVDT, FALSE otherwise.
+**
+*******************************************************************************/
+static BOOLEAN bta_av_next_getcap(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    int     i;
+    tAVDT_GETCAP_REQ    *p_req;
+    BOOLEAN     sent_cmd = FALSE;
+
+    for (i = p_scb->sep_info_idx; i < p_scb->num_seps; i++)
+    {
+        /* steam not in use, is a sink, and is the right media type (audio/video) */
+        if ((p_scb->sep_info[i].in_use == FALSE) &&
+            (p_scb->sep_info[i].tsep == AVDT_TSEP_SNK) &&
+            (p_scb->sep_info[i].media_type == p_scb->media_type))
+        {
+            p_scb->sep_info_idx = i;
+
+            /* we got a stream; get its capabilities */
+            if (p_scb->p_cap == NULL)
+            {
+                p_scb->p_cap = (tAVDT_CFG *) GKI_getbuf(sizeof(tAVDT_CFG));
+            }
+            if (p_scb->p_cap == NULL)
+            {
+                i = p_scb->num_seps;
+                break;
+            }
+            if (p_scb->avdt_version >= AVDT_VERSION_SYNC)
+            {
+                p_req = AVDT_GetAllCapReq;
+            }
+            else
+            {
+                p_req = AVDT_GetCapReq;
+            }
+            (*p_req)(p_scb->peer_addr,
+                           p_scb->sep_info[i].seid,
+                           p_scb->p_cap, bta_av_dt_cback[p_scb->hdi]);
+            sent_cmd = TRUE;
+            break;
+        }
+    }
+
+    /* if no streams available then stream open fails */
+    if (!sent_cmd)
+    {
+        bta_av_ssm_execute(p_scb, BTA_AV_STR_GETCAP_FAIL_EVT, p_data);
+    }
+
+    return sent_cmd;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_proc_stream_evt
+**
+** Description      Utility function to compose stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_proc_stream_evt(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data, int index)
+{
+    tBTA_AV_STR_MSG     *p_msg;
+    UINT16              sec_len = 0;
+    tBTA_AV_SCB         *p_scb = bta_av_cb.p_scb[index];
+    int                 xx;
+
+    if (p_data)
+    {
+        if (event == AVDT_SECURITY_IND_EVT)
+        {
+            sec_len = (p_data->security_ind.len < BTA_AV_SECURITY_MAX_LEN) ?
+                       p_data->security_ind.len : BTA_AV_SECURITY_MAX_LEN;
+        }
+        else if (event == AVDT_SECURITY_CFM_EVT && p_data->hdr.err_code == 0)
+        {
+            sec_len = (p_data->security_cfm.len < BTA_AV_SECURITY_MAX_LEN) ?
+                       p_data->security_cfm.len : BTA_AV_SECURITY_MAX_LEN;
+        }
+    }
+
+    if (p_scb && (p_msg = (tBTA_AV_STR_MSG *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_STR_MSG) + sec_len))) != NULL)
+    {
+
+        /* copy event data, bd addr, and handle to event message buffer */
+        p_msg->hdr.offset = 0;
+
+        if (bd_addr != NULL)
+        {
+            bdcpy(p_msg->bd_addr, bd_addr);
+            APPL_TRACE_DEBUG6("  bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                          bd_addr[0], bd_addr[1],
+                          bd_addr[2], bd_addr[3],
+                          bd_addr[4], bd_addr[5]);
+        }
+
+        if (p_data != NULL)
+        {
+            memcpy(&p_msg->msg, p_data, sizeof (tAVDT_CTRL));
+            /* copy config params to event message buffer */
+            switch (event)
+            {
+            case AVDT_CONFIG_IND_EVT:
+            /* We might have 2 SEP signallings(A2DP + VDP) with one peer device on one L2CAP.
+             * If we already have a signalling connection with the bd_addr and the streaming
+             * SST is at INIT state, change it to INCOMING state to handle the signalling
+             * from the 2nd SEP.                                                                */
+            if ((bta_av_find_lcb(bd_addr, BTA_AV_LCB_FIND) != NULL) && (bta_av_is_scb_init(p_scb)))
+            {
+                bta_av_set_scb_sst_incoming (p_scb);
+
+                /* When ACP_CONNECT_EVT was received, we put first available scb to incoming state.
+                 * Later when we receive AVDT_CONFIG_IND_EVT, we use a new p_scb and set its state to
+                 * incoming which we do it above.
+                 * We also have to set the old p_scb state to init to be used later             */
+                for (xx = 0; xx < BTA_AV_NUM_STRS; xx++)
+                {
+                    if ((bta_av_cb.p_scb[xx]) && (xx != index))
+                    {
+                        if (bta_av_cb.p_scb[xx]->state == BTA_AV_INCOMING_SST)
+                        {
+                            bta_av_cb.p_scb[xx]->state = BTA_AV_INIT_SST;
+                            bta_av_cb.p_scb[xx]->coll_mask = 0;
+                            break;
+                        }
+                    }
+                }
+            }
+
+            memcpy(&p_msg->cfg, p_data->config_ind.p_cfg, sizeof(tAVDT_CFG));
+            break;
+
+            case AVDT_SECURITY_IND_EVT:
+                p_msg->msg.security_ind.p_data = (UINT8 *) (p_msg + 1);
+                memcpy(p_msg->msg.security_ind.p_data, p_data->security_ind.p_data, sec_len);
+                break;
+
+            case AVDT_SECURITY_CFM_EVT:
+                p_msg->msg.security_cfm.p_data = (UINT8 *) (p_msg + 1);
+                if (p_data->hdr.err_code == 0)
+                {
+                    memcpy(p_msg->msg.security_cfm.p_data, p_data->security_cfm.p_data, sec_len);
+                }
+                break;
+            case AVDT_SUSPEND_IND_EVT:
+                    p_msg->msg.hdr.err_code = 0;
+                break;
+
+            default:
+                break;
+            }
+        }
+        else
+            p_msg->msg.hdr.err_code = 0;
+
+        /* look up application event */
+        if ((p_data == NULL) || (p_data->hdr.err_code == 0))
+        {
+            p_msg->hdr.event = bta_av_stream_evt_ok[event];
+        }
+        else
+        {
+            p_msg->hdr.event = bta_av_stream_evt_fail[event];
+        }
+
+        p_msg->initiator = FALSE;
+        if (event == AVDT_SUSPEND_CFM_EVT)
+            p_msg->initiator = TRUE;
+
+        APPL_TRACE_EVENT1("hndl:x%x", p_scb->hndl);
+        p_msg->hdr.layer_specific = p_scb->hndl;
+        p_msg->handle   = handle;
+        p_msg->avdt_event = event;
+        bta_sys_sendmsg(p_msg);
+    }
+
+/* coverity[var_deref_model]: Variable "p_data" tracked as NULL was passed to function "bta_av_conn_cback" that dereferences it.
+ * false-positive: bta_av_conn_cback only processes AVDT_CONNECT_IND_EVT and AVDT_DISCONNECT_IND_EVT event
+ *                 these 2 events always have associated p_data
+ */
+    bta_av_conn_cback(handle, bd_addr, event, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_stream0_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_stream0_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream0_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 0);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_stream1_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_stream1_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream1_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 1);
+}
+
+#if BTA_AV_NUM_STRS > 2
+/*******************************************************************************
+**
+** Function         bta_av_stream2_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_stream2_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream2_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 2);
+}
+#endif
+
+#if BTA_AV_NUM_STRS > 3
+/*******************************************************************************
+**
+** Function         bta_av_stream3_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_stream3_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream3_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 3);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_stream4_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+#if BTA_AV_NUM_STRS > 4
+static void bta_av_stream4_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream4_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 4);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_stream5_cback
+**
+** Description      This is the AVDTP callback function for stream events.
+**
+** Returns          void
+**
+*******************************************************************************/
+#if BTA_AV_NUM_STRS > 5
+static void bta_av_stream5_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    APPL_TRACE_EVENT2("bta_av_stream5_cback avdt_handle: %d event=0x%x", handle, event);
+    bta_av_proc_stream_evt(handle, bd_addr, event, p_data, 5);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_a2d_sdp_cback
+**
+** Description      A2DP service discovery callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_a2d_sdp_cback(BOOLEAN found, tA2D_Service *p_service)
+{
+    tBTA_AV_SDP_RES *p_msg;
+    tBTA_AV_SCB     *p_scb;
+
+    if ((p_msg = (tBTA_AV_SDP_RES *) GKI_getbuf(sizeof(tBTA_AV_SDP_RES))) != NULL)
+    {
+        p_msg->hdr.event = (found) ? BTA_AV_SDP_DISC_OK_EVT : BTA_AV_SDP_DISC_FAIL_EVT;
+
+        p_scb = bta_av_hndl_to_scb(bta_av_cb.handle);
+        if (p_scb)
+        {
+            if (found && (p_service != NULL))
+                p_scb->avdt_version = p_service->avdt_version;
+            else
+                p_scb->avdt_version = 0x00;
+
+            p_msg->hdr.layer_specific = bta_av_cb.handle;
+            bta_sys_sendmsg(p_msg);
+        }
+        else
+        {
+            APPL_TRACE_ERROR1 ("bta_av_a2d_sdp_cback, no scb found for handle(0x%x)", bta_av_cb.handle);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_adjust_seps_idx
+**
+** Description      adjust the sep_idx
+**
+** Returns
+**
+*******************************************************************************/
+static void bta_av_adjust_seps_idx(tBTA_AV_SCB *p_scb)
+{
+    int             xx;
+
+    APPL_TRACE_DEBUG1("bta_av_adjust_seps_idx codec_type: %d", p_scb->codec_type);
+    for(xx=0; xx<BTA_AV_MAX_SEPS; xx++)
+    {
+        APPL_TRACE_DEBUG2("av_handle: %d codec_type: %d",
+            p_scb->seps[xx].av_handle, p_scb->seps[xx].codec_type);
+        if(p_scb->seps[xx].av_handle && p_scb->codec_type == p_scb->seps[xx].codec_type)
+        {
+            p_scb->sep_idx      = xx;
+            p_scb->avdt_handle  = p_scb->seps[xx].av_handle;
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_switch_role
+**
+** Description      Switch role was not started and a timer was started.
+**                  another attempt to switch role now - still opening.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_switch_role (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RS_RES      switch_res = BTA_AV_RS_NONE;
+    tBTA_AV_API_OPEN  *p_buf = &p_scb->q_info.open;
+
+    APPL_TRACE_DEBUG1("bta_av_switch_role wait:x%x", p_scb->wait);
+    if (p_scb->wait & BTA_AV_WAIT_ROLE_SW_RES_START)
+        p_scb->wait |= BTA_AV_WAIT_ROLE_SW_RETRY;
+
+    /* clear the masks set when the timer is started */
+    p_scb->wait &= ~(BTA_AV_WAIT_ROLE_SW_RES_OPEN|BTA_AV_WAIT_ROLE_SW_RES_START);
+
+    if (p_scb->q_tag == BTA_AV_Q_TAG_OPEN)
+    {
+        if (bta_av_switch_if_needed(p_scb) || !bta_av_link_role_ok(p_scb, A2D_SET_MULTL_BIT))
+        {
+            p_scb->wait |= BTA_AV_WAIT_ROLE_SW_RES_OPEN;
+        }
+        else
+        {
+            /* this should not happen in theory. Just in case...
+             * continue to do_disc_a2d */
+            switch_res = BTA_AV_RS_DONE;
+        }
+    }
+    else
+    {
+        /* report failure on OPEN */
+        switch_res = BTA_AV_RS_FAIL;
+    }
+
+    if (switch_res != BTA_AV_RS_NONE)
+    {
+        if (bta_av_cb.rs_idx == (p_scb->hdi + 1))
+        {
+            bta_av_cb.rs_idx = 0;
+        }
+        p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_RETRY;
+        p_scb->q_tag = 0;
+        p_buf->switch_res = switch_res;
+        bta_av_do_disc_a2d(p_scb, (tBTA_AV_DATA *)p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_role_res
+**
+** Description      Handle the role changed event
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_role_res (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    BOOLEAN         initiator = FALSE;
+    tBTA_AV_START   start;
+    tBTA_AV_OPEN    av_open;
+
+    APPL_TRACE_DEBUG3("bta_av_role_res q_tag:%d, wait:x%x, role:x%x", p_scb->q_tag, p_scb->wait, p_scb->role);
+    if (p_scb->role & BTA_AV_ROLE_START_INT)
+        initiator = TRUE;
+
+    if (p_scb->q_tag == BTA_AV_Q_TAG_START)
+    {
+        if (p_scb->wait & BTA_AV_WAIT_ROLE_SW_STARTED)
+        {
+            p_scb->role &= ~BTA_AV_ROLE_START_INT;
+            p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+            if (p_data->role_res.hci_status != HCI_SUCCESS)
+            {
+                bta_sys_idle(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+                /* start failed because of role switch. */
+                start.chnl   = p_scb->chnl;
+                start.status = BTA_AV_FAIL_ROLE;
+                start.hndl   = p_scb->hndl;
+                start.initiator = initiator;
+                (*bta_av_cb.p_cback)(BTA_AV_START_EVT, (tBTA_AV *) &start);
+            }
+            else
+            {
+                bta_av_start_ok(p_scb, p_data);
+            }
+        }
+        else if (p_scb->wait & BTA_AV_WAIT_ROLE_SW_RES_START)
+            p_scb->wait |= BTA_AV_WAIT_ROLE_SW_FAILED;
+    }
+    else if (p_scb->q_tag == BTA_AV_Q_TAG_OPEN)
+    {
+        if (p_scb->wait & BTA_AV_WAIT_ROLE_SW_RES_OPEN)
+        {
+            p_scb->role &= ~BTA_AV_ROLE_START_INT;
+            p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+
+            if (p_data->role_res.hci_status != HCI_SUCCESS)
+            {
+                /* Open failed because of role switch. */
+                bdcpy(av_open.bd_addr, p_scb->peer_addr);
+                av_open.chnl   = p_scb->chnl;
+                av_open.hndl   = p_scb->hndl;
+                start.status = BTA_AV_FAIL_ROLE;
+                (*bta_av_cb.p_cback)(BTA_AV_OPEN_EVT, (tBTA_AV *)&av_open);
+            }
+            else
+            {
+                /* Continue av open process */
+                p_scb->q_info.open.switch_res = BTA_AV_RS_DONE;
+                bta_av_do_disc_a2d (p_scb, (tBTA_AV_DATA *)&(p_scb->q_info.open));
+            }
+        }
+        else
+        {
+            APPL_TRACE_WARNING2 ("Unexpected role switch event: q_tag = %d wait = %d", p_scb->q_tag, p_scb->wait);
+        }
+    }
+
+    APPL_TRACE_DEBUG2("wait:x%x, role:x%x", p_scb->wait, p_scb->role);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_delay_co
+**
+** Description      Call the delay call-out function to report the delay report
+**                  from SNK
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_delay_co (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    p_scb->p_cos->delay(p_scb->hndl, p_data->str_msg.msg.delay_rpt_cmd.delay);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_do_disc_a2d
+**
+** Description      Do service discovery for A2DP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_do_disc_a2d (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    BOOLEAN     ok_continue = FALSE;
+    tA2D_SDP_DB_PARAMS  db_params;
+    UINT16              attr_list[] = {ATTR_ID_SERVICE_CLASS_ID_LIST,
+                                       ATTR_ID_PROTOCOL_DESC_LIST,
+                                       ATTR_ID_BT_PROFILE_DESC_LIST};
+
+    APPL_TRACE_DEBUG3("bta_av_do_disc_a2d use_rc: %d rs:%d, oc:%d",
+        p_data->api_open.use_rc, p_data->api_open.switch_res, bta_av_cb.audio_open_cnt);
+
+    memcpy (&(p_scb->open_api), &(p_data->api_open), sizeof(tBTA_AV_API_OPEN));
+
+    switch(p_data->api_open.switch_res)
+    {
+    case BTA_AV_RS_NONE:
+        if (bta_av_switch_if_needed(p_scb) || !bta_av_link_role_ok(p_scb, A2D_SET_MULTL_BIT))
+        {
+            /* waiting for role switch result. save the api to control block */
+            memcpy(&p_scb->q_info.open, &p_data->api_open, sizeof(tBTA_AV_API_OPEN));
+            p_scb->wait |= BTA_AV_WAIT_ROLE_SW_RES_OPEN;
+            p_scb->q_tag = BTA_AV_Q_TAG_OPEN;
+        }
+        else
+        {
+            ok_continue = TRUE;
+        }
+        break;
+
+    case BTA_AV_RS_FAIL:
+        /* report a new failure event  */
+        p_scb->open_status = BTA_AV_FAIL_ROLE;
+        bta_av_ssm_execute(p_scb, BTA_AV_SDP_DISC_FAIL_EVT, NULL);
+        break;
+
+    case BTA_AV_RS_OK:
+        p_data = (tBTA_AV_DATA *)&p_scb->q_info.open;
+        /* continue to open if link role is ok */
+        if (bta_av_link_role_ok(p_scb, A2D_SET_MULTL_BIT))
+        {
+            ok_continue = TRUE;
+        }
+        else
+        {
+            p_scb->wait |= BTA_AV_WAIT_ROLE_SW_RES_OPEN;
+        }
+        break;
+
+    case BTA_AV_RS_DONE:
+        ok_continue = TRUE;
+        break;
+    }
+
+    APPL_TRACE_DEBUG3("ok_continue: %d wait:x%x, q_tag: %d", ok_continue, p_scb->wait, p_scb->q_tag);
+    if (!ok_continue)
+        return;
+
+    /* clear the role switch bits */
+    p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+
+    if (p_scb->wait & BTA_AV_WAIT_CHECK_RC)
+    {
+        p_scb->wait &= ~BTA_AV_WAIT_CHECK_RC;
+        bta_sys_start_timer(&p_scb->timer, BTA_AV_AVRC_TIMER_EVT, BTA_AV_RC_DISC_TIME_VAL);
+    }
+
+    if (bta_av_cb.features & BTA_AV_FEAT_MASTER)
+    {
+    L2CA_SetDesireRole(L2CAP_ROLE_DISALLOW_SWITCH);
+
+    if (bta_av_cb.audio_open_cnt == 1)
+    {
+        /* there's already an A2DP connection. do not allow switch */
+        bta_sys_clear_default_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH);
+    }
+    }
+    /* store peer addr other parameters */
+    bta_av_save_addr(p_scb, p_data->api_open.bd_addr);
+    p_scb->sec_mask = p_data->api_open.sec_mask;
+    p_scb->use_rc = p_data->api_open.use_rc;
+
+    bta_sys_app_open(BTA_ID_AV, p_scb->app_id, p_scb->peer_addr);
+
+    /* allocate discovery database */
+    if (p_scb->p_disc_db == NULL)
+    {
+        p_scb->p_disc_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(BTA_AV_DISC_BUF_SIZE);
+    }
+
+    /* only one A2D find service is active at a time */
+    bta_av_cb.handle = p_scb->hndl;
+
+    if(p_scb->p_disc_db)
+    {
+        /* set up parameters */
+        db_params.db_len = BTA_AV_DISC_BUF_SIZE;
+        db_params.num_attr = 3;
+        db_params.p_db = p_scb->p_disc_db;
+        db_params.p_attrs = attr_list;
+
+        if(A2D_FindService(UUID_SERVCLASS_AUDIO_SINK, p_scb->peer_addr, &db_params,
+                        bta_av_a2d_sdp_cback) == A2D_SUCCESS)
+        {
+            return;
+        }
+    }
+
+    /* when the code reaches here, either the DB is NULL
+     * or A2D_FindService is not successful */
+    bta_av_a2d_sdp_cback(FALSE, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_cleanup
+**
+** Description      cleanup AV stream control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_cleanup(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CONN_CHG msg;
+    int             xx;
+    UINT8           role = BTA_AV_ROLE_AD_INT;
+
+    APPL_TRACE_DEBUG0("bta_av_cleanup");
+
+    /* free any buffers */
+    utl_freebuf((void **) &p_scb->p_cap);
+    utl_freebuf((void **) &p_scb->p_disc_db);
+    p_scb->avdt_version = 0;
+
+    /* initialize some control block variables */
+    p_scb->open_status = BTA_AV_SUCCESS;
+
+    /* if de-registering shut everything down */
+    msg.hdr.layer_specific  = p_scb->hndl;
+    p_scb->started  = FALSE;
+    p_scb->cong = FALSE;
+    p_scb->role = role;
+    p_scb->cur_psc_mask = 0;
+    p_scb->wait = 0;
+    p_scb->num_disc_snks = 0;
+    bta_sys_stop_timer(&p_scb->timer);
+    if (p_scb->deregistring)
+    {
+        /* remove stream */
+        for(xx=0; xx<BTA_AV_MAX_SEPS; xx++)
+        {
+            if(p_scb->seps[xx].av_handle)
+                AVDT_RemoveStream(p_scb->seps[xx].av_handle);
+            p_scb->seps[xx].av_handle = 0;
+        }
+
+        bta_av_dereg_comp((tBTA_AV_DATA *) &msg);
+    }
+    else
+    {
+        /* report stream closed to main SM */
+        msg.is_up = FALSE;
+        bdcpy(msg.peer_addr, p_scb->peer_addr);
+        bta_av_conn_chg((tBTA_AV_DATA *) &msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_free_sdb
+**
+** Description      Free service discovery db buffer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_free_sdb(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    utl_freebuf((void **) &p_scb->p_disc_db);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_config_ind
+**
+** Description      Handle a stream configuration indication from the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_config_ind (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CI_SETCONFIG setconfig;
+    tAVDT_SEP_INFO       *p_info;
+    tAVDT_CFG            *p_evt_cfg = &p_data->str_msg.cfg;
+    UINT8   psc_mask = (p_evt_cfg->psc_mask | p_scb->cfg.psc_mask);
+
+    p_scb->avdt_label = p_data->str_msg.msg.hdr.label;
+    memcpy(p_scb->cfg.codec_info, p_evt_cfg->codec_info, AVDT_CODEC_SIZE);
+    p_scb->codec_type = p_evt_cfg->codec_info[BTA_AV_CODEC_TYPE_IDX];
+    bta_av_save_addr(p_scb, p_data->str_msg.bd_addr);
+
+    /* Clear collision mask */
+    p_scb->coll_mask = 0;
+    bta_sys_stop_timer(&bta_av_cb.acp_sig_tmr);
+
+    /* if no codec parameters in configuration, fail */
+    if ((p_evt_cfg->num_codec == 0) ||
+    /* or the peer requests for a service we do not support */
+        ((psc_mask != p_scb->cfg.psc_mask) &&
+        (psc_mask != (p_scb->cfg.psc_mask&~AVDT_PSC_DELAY_RPT))) )
+    {
+        setconfig.hndl      = p_scb->hndl; /* we may not need this */
+        setconfig.err_code  = AVDT_ERR_UNSUP_CFG;
+        bta_av_ssm_execute(p_scb, BTA_AV_CI_SETCONFIG_FAIL_EVT, (tBTA_AV_DATA *) &setconfig);
+    }
+    else
+    {
+        p_info = &p_scb->sep_info[0];
+        p_info->in_use = 0;
+        p_info->media_type = p_scb->media_type;
+        p_info->seid = p_data->str_msg.msg.config_ind.int_seid;
+        p_info->tsep = AVDT_TSEP_SNK;
+        p_scb->role      |= BTA_AV_ROLE_AD_ACP;
+        p_scb->cur_psc_mask = p_evt_cfg->psc_mask;
+        if (bta_av_cb.features & BTA_AV_FEAT_RCTG)
+            p_scb->use_rc = TRUE;
+        else
+            p_scb->use_rc = FALSE;
+
+        p_scb->num_seps  = 1;
+        p_scb->sep_info_idx = 0;
+        APPL_TRACE_DEBUG3("bta_av_config_ind: SEID: %d use_rc: %d cur_psc_mask:0x%x", p_info->seid, p_scb->use_rc, p_scb->cur_psc_mask);
+
+        p_scb->p_cos->setcfg(p_scb->hndl, p_scb->codec_type,
+                             p_evt_cfg->codec_info,
+                             p_info->seid,
+                             p_scb->peer_addr,
+                             p_evt_cfg->num_protect,
+                             p_evt_cfg->protect_info);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_disconnect_req
+**
+** Description      Disconnect AVDTP connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_disconnect_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RCB *p_rcb;
+    APPL_TRACE_DEBUG1("bta_av_disconnect_req conn_lcb: 0x%x", bta_av_cb.conn_lcb);
+
+    bta_sys_stop_timer(&bta_av_cb.sig_tmr);
+    bta_sys_stop_timer(&p_scb->timer);
+    if(bta_av_cb.conn_lcb)
+    {
+        p_rcb = bta_av_get_rcb_by_shdl((UINT8)(p_scb->hdi + 1));
+        if (p_rcb)
+            bta_av_del_rc(p_rcb);
+        AVDT_DisconnectReq(p_scb->peer_addr, bta_av_dt_cback[p_scb->hdi]);
+    }
+    else
+    {
+        bta_av_ssm_execute(p_scb, BTA_AV_AVDT_DISCONNECT_EVT, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_security_req
+**
+** Description      Send an AVDTP security request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_security_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    if (bta_av_cb.features & BTA_AV_FEAT_PROTECT)
+    {
+        AVDT_SecurityReq(p_scb->avdt_handle, p_data->api_protect_req.p_data,
+                         p_data->api_protect_req.len);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_security_rsp
+**
+** Description      Send an AVDTP security response.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_security_rsp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    if (bta_av_cb.features & BTA_AV_FEAT_PROTECT)
+    {
+        AVDT_SecurityRsp(p_scb->avdt_handle, p_scb->avdt_label, p_data->api_protect_rsp.error_code,
+                         p_data->api_protect_rsp.p_data, p_data->api_protect_rsp.len);
+    }
+    else
+    {
+        AVDT_SecurityRsp(p_scb->avdt_handle, p_scb->avdt_label, AVDT_ERR_NSC,
+                     NULL, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_setconfig_rsp
+**
+** Description      setconfig is OK
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_setconfig_rsp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8   num = p_data->ci_setconfig.num_seid + 1;
+    UINT8   *p_seid = p_data->ci_setconfig.p_seid;
+    int     i;
+
+    /* we like this codec_type. find the sep_idx */
+    bta_av_adjust_seps_idx(p_scb);
+    APPL_TRACE_DEBUG2("bta_av_setconfig_rsp: sep_idx: %d cur_psc_mask:0x%x", p_scb->sep_idx, p_scb->cur_psc_mask);
+    AVDT_ConfigRsp(p_scb->avdt_handle, p_scb->avdt_label, p_data->ci_setconfig.err_code,
+                   p_data->ci_setconfig.category);
+
+    bta_sys_stop_timer(&bta_av_cb.sig_tmr);
+
+    if(p_data->ci_setconfig.err_code == AVDT_SUCCESS)
+    {
+        p_scb->wait = BTA_AV_WAIT_ACP_CAPS_ON;
+        if(p_data->ci_setconfig.recfg_needed)
+            p_scb->role |= BTA_AV_ROLE_SUSPEND_OPT;
+        APPL_TRACE_ERROR3("bta_av_setconfig_rsp recfg_needed:%d role:x%x num:%d",
+            p_data->ci_setconfig.recfg_needed, p_scb->role, num);
+        /* callout module tells BTA the number of "good" SEPs and their SEIDs.
+         * getcap on these SEID */
+        p_scb->num_seps = num;
+
+        if (p_scb->cur_psc_mask & AVDT_PSC_DELAY_RPT)
+            p_scb->avdt_version = AVDT_VERSION_SYNC;
+
+
+        if (p_scb->codec_type == BTA_AV_CODEC_SBC || num > 1)
+        {
+            /* if SBC is used by the SNK as INT, discover req is not sent in bta_av_config_ind.
+             * call disc_res now */
+            p_scb->p_cos->disc_res(p_scb->hndl, num, num, p_scb->peer_addr);
+        }
+        else
+        {
+            /* we do not know the peer device and it is using non-SBC codec
+             * we need to know all the SEPs on SNK */
+            bta_av_discover_req(p_scb, NULL);
+            return;
+        }
+
+        for (i = 1; i < num; i++)
+        {
+            APPL_TRACE_DEBUG2("sep_info[%d] SEID: %d", i, p_seid[i-1]);
+            /* initialize the sep_info[] to get capabilities */
+            p_scb->sep_info[i].in_use = FALSE;
+            p_scb->sep_info[i].tsep = AVDT_TSEP_SNK;
+            p_scb->sep_info[i].media_type = p_scb->media_type;
+            p_scb->sep_info[i].seid = p_seid[i-1];
+        }
+        bta_av_next_getcap(p_scb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_str_opened
+**
+** Description      Stream opened OK (incoming/outgoing).
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_str_opened (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CONN_CHG msg;
+    tBTA_AV_OPEN    open;
+    UINT8 *p;
+    UINT16 mtu;
+
+    msg.hdr.layer_specific = p_scb->hndl;
+    msg.is_up = TRUE;
+    bdcpy(msg.peer_addr, p_scb->peer_addr);
+    p_scb->l2c_cid      = AVDT_GetL2CapChannel(p_scb->avdt_handle);
+    bta_av_conn_chg((tBTA_AV_DATA *) &msg);
+    /* set the congestion flag, so AV would not send media packets by accident */
+    p_scb->cong = TRUE;
+
+
+    p_scb->stream_mtu = p_data->str_msg.msg.open_ind.peer_mtu - AVDT_MEDIA_HDR_SIZE;
+    mtu = bta_av_chk_mtu(p_scb, p_scb->stream_mtu);
+    APPL_TRACE_DEBUG3("bta_av_str_opened l2c_cid: 0x%x stream_mtu: %d mtu: %d",
+        p_scb->l2c_cid, p_scb->stream_mtu, mtu);
+    if(mtu == 0 || mtu > p_scb->stream_mtu)
+        mtu = p_scb->stream_mtu;
+
+    /* Set the media channel as medium priority */
+    L2CA_SetTxPriority(p_scb->l2c_cid, L2CAP_CHNL_PRIORITY_MEDIUM);
+    L2CA_SetChnlFlushability (p_scb->l2c_cid, TRUE);
+
+    bta_sys_conn_open(BTA_ID_AV, p_scb->app_id, p_scb->peer_addr);
+    memset(&p_scb->q_info, 0, sizeof(tBTA_AV_Q_INFO));
+
+    p_scb->l2c_bufs = 0;
+    p_scb->p_cos->open(p_scb->hndl,
+        p_scb->codec_type, p_scb->cfg.codec_info, mtu);
+
+    {
+        /* TODO check if other audio channel is open.
+         * If yes, check if reconfig is needed
+         * Rigt now we do not do this kind of checking.
+         * BTA-AV is INT for 2nd audio connection.
+         * The application needs to make sure the current codec_info is proper.
+         * If one audio connection is open and another SNK attempts to connect to AV,
+         * the connection will be rejected.
+         */
+        /* check if other audio channel is started. If yes, start */
+        bdcpy(open.bd_addr, p_scb->peer_addr);
+        open.chnl   = p_scb->chnl;
+        open.hndl   = p_scb->hndl;
+        open.status = BTA_AV_SUCCESS;
+        open.starting = bta_av_chk_start(p_scb);
+        open.edr    = 0;
+        if( NULL != (p = BTM_ReadRemoteFeatures(p_scb->peer_addr)))
+        {
+            if(HCI_EDR_ACL_2MPS_SUPPORTED(p))
+                open.edr |= BTA_AV_EDR_2MBPS;
+            if(HCI_EDR_ACL_3MPS_SUPPORTED(p))
+                open.edr |= BTA_AV_EDR_3MBPS;
+        }
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+        bta_ar_avdt_conn(BTA_ID_AV, open.bd_addr);
+#endif
+        (*bta_av_cb.p_cback)(BTA_AV_OPEN_EVT, (tBTA_AV *) &open);
+        if(open.starting)
+        {
+            bta_av_ssm_execute(p_scb, BTA_AV_AP_START_EVT, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_security_ind
+**
+** Description      Handle an AVDTP security indication.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_security_ind (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_PROTECT_REQ protect_req;
+
+    p_scb->avdt_label = p_data->str_msg.msg.hdr.label;
+
+    if (bta_av_cb.features & BTA_AV_FEAT_PROTECT)
+    {
+        protect_req.chnl    = p_scb->chnl;
+        protect_req.hndl    = p_scb->hndl;
+        /*
+        APPL_TRACE_EVENT1("sec ind handle: x%x", protect_req.hndl);
+        */
+        protect_req.p_data  = p_data->str_msg.msg.security_ind.p_data;
+        protect_req.len     = p_data->str_msg.msg.security_ind.len;
+
+        (*bta_av_cb.p_cback)(BTA_AV_PROTECT_REQ_EVT, (tBTA_AV *) &protect_req);
+    }
+    /* app doesn't support security indication; respond with failure */
+    else
+    {
+        AVDT_SecurityRsp(p_scb->avdt_handle, p_scb->avdt_label, AVDT_ERR_NSC, NULL, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_security_cfm
+**
+** Description      Handle an AVDTP security confirm.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_security_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_PROTECT_RSP protect_rsp;
+
+    if (bta_av_cb.features & BTA_AV_FEAT_PROTECT)
+    {
+        protect_rsp.chnl    = p_scb->chnl;
+        protect_rsp.hndl    = p_scb->hndl;
+        protect_rsp.p_data  = p_data->str_msg.msg.security_cfm.p_data;
+        protect_rsp.len     = p_data->str_msg.msg.security_cfm.len;
+        protect_rsp.err_code= p_data->str_msg.msg.hdr.err_code;
+
+        (*bta_av_cb.p_cback)(BTA_AV_PROTECT_RSP_EVT, (tBTA_AV *) &protect_rsp);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_do_close
+**
+** Description      Close stream.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_do_close (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    /* stop stream if started */
+    if (p_scb->co_started)
+    {
+        bta_av_str_stopped(p_scb, NULL);
+    }
+    bta_sys_stop_timer(&bta_av_cb.sig_tmr);
+
+    /* close stream */
+    p_scb->started = FALSE;
+
+    /* drop the buffers queued in L2CAP */
+    L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_ALL);
+
+    AVDT_CloseReq(p_scb->avdt_handle);
+    /* just in case that the link is congested, link is flow controled by peer or
+     * for whatever reason the the close request can not be sent in time.
+     * when this timer expires, AVDT_DisconnectReq will be called to disconnect the link
+     */
+    bta_sys_start_timer(&p_scb->timer,
+                        (UINT16)BTA_AV_API_CLOSE_EVT,
+                        BTA_AV_CLOSE_REQ_TIME_VAL);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_connect_req
+**
+** Description      Connect AVDTP connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_connect_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    utl_freebuf((void **) &p_scb->p_disc_db);
+
+    if (p_scb->coll_mask & BTA_AV_COLL_INC_TMR)
+    {
+        /* SNK initiated L2C connection while SRC was doing SDP.    */
+        /* Wait until timeout to check if SNK starts signalling.    */
+        APPL_TRACE_EVENT1("bta_av_connect_req: coll_mask = 0x%2X", p_scb->coll_mask);
+        return;
+    }
+
+    AVDT_ConnectReq(p_scb->peer_addr, p_scb->sec_mask, bta_av_dt_cback[p_scb->hdi]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sdp_failed
+**
+** Description      Service discovery failed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_sdp_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    if (!p_scb->open_status)
+        p_scb->open_status = BTA_AV_FAIL_SDP;
+
+    utl_freebuf((void **) &p_scb->p_disc_db);
+    bta_av_str_closed(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_disc_results
+**
+** Description      Handle the AVDTP discover results.  Search through the
+**                  results and find the first available stream, and get
+**                  its capabilities.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_disc_results (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8 num_snks = 0, i;
+
+    /* store number of stream endpoints returned */
+    p_scb->num_seps = p_data->str_msg.msg.discover_cfm.num_seps;
+
+    for (i = 0; i < p_scb->num_seps; i++)
+    {
+        /* steam not in use, is a sink, and is audio */
+        if ((p_scb->sep_info[i].in_use == FALSE) &&
+            (p_scb->sep_info[i].tsep == AVDT_TSEP_SNK) &&
+            (p_scb->sep_info[i].media_type == p_scb->media_type))
+        {
+            num_snks++;
+        }
+    }
+
+    p_scb->p_cos->disc_res(p_scb->hndl, p_scb->num_seps, num_snks, p_scb->peer_addr);
+    p_scb->num_disc_snks = num_snks;
+
+    /* if we got any */
+    if (p_scb->num_seps > 0)
+    {
+        /* initialize index into discovery results */
+        p_scb->sep_info_idx = 0;
+
+        /* get the capabilities of the first available stream */
+        bta_av_next_getcap(p_scb, p_data);
+    }
+    /* else we got discover response but with no streams; we're done */
+    else
+    {
+        bta_av_ssm_execute(p_scb, BTA_AV_STR_DISC_FAIL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_disc_res_as_acp
+**
+** Description      Handle the AVDTP discover results.  Search through the
+**                  results and find the first available stream, and get
+**                  its capabilities.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_disc_res_as_acp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8 num_snks = 0, i;
+
+    /* store number of stream endpoints returned */
+    p_scb->num_seps = p_data->str_msg.msg.discover_cfm.num_seps;
+
+
+
+    for (i = 0; i < p_scb->num_seps; i++)
+    {
+        /* steam is a sink, and is audio */
+        if ((p_scb->sep_info[i].tsep == AVDT_TSEP_SNK) &&
+            (p_scb->sep_info[i].media_type == p_scb->media_type))
+        {
+            p_scb->sep_info[i].in_use = FALSE;
+            num_snks++;
+        }
+    }
+
+    p_scb->p_cos->disc_res(p_scb->hndl, p_scb->num_seps, num_snks, p_scb->peer_addr);
+    p_scb->num_disc_snks = num_snks;
+
+    /* if we got any */
+    if (p_scb->num_seps > 0)
+    {
+        /* initialize index into discovery results */
+        p_scb->sep_info_idx = 0;
+
+        /* get the capabilities of the first available stream */
+        bta_av_next_getcap(p_scb, p_data);
+    }
+    /* else we got discover response but with no streams; we're done */
+    else
+    {
+        bta_av_ssm_execute(p_scb, BTA_AV_STR_DISC_FAIL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_save_caps
+**
+** Description      report the SNK SEP capabilities to application
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_save_caps(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tAVDT_CFG   cfg;
+    tAVDT_SEP_INFO  *p_info = &p_scb->sep_info[p_scb->sep_info_idx];
+    UINT8       old_wait = p_scb->wait;
+    BOOLEAN     getcap_done = FALSE;
+
+    APPL_TRACE_DEBUG3("bta_av_save_caps num_seps:%d sep_info_idx:%d wait:x%x",
+        p_scb->num_seps, p_scb->sep_info_idx, p_scb->wait);
+    memcpy(&cfg, p_scb->p_cap, sizeof(tAVDT_CFG));
+    /* let application know the capability of the SNK */
+    p_scb->p_cos->getcfg(p_scb->hndl, cfg.codec_info[BTA_AV_CODEC_TYPE_IDX],
+        cfg.codec_info, &p_scb->sep_info_idx, p_info->seid,
+        &cfg.num_protect, cfg.protect_info);
+
+    p_scb->sep_info_idx++;
+    if(p_scb->num_seps > p_scb->sep_info_idx)
+    {
+        /* Some devices have seps at the end of the discover list, which is not */
+        /* matching media type(video not audio).                                */
+        /* In this case, we are done with getcap without sending another        */
+        /* request to AVDT.                                                     */
+        if (!bta_av_next_getcap(p_scb, p_data))
+            getcap_done = TRUE;
+    }
+    else
+        getcap_done = TRUE;
+
+    if (getcap_done)
+    {
+        /* we are done getting capabilities. restore the p_cb->sep_info_idx */
+        p_scb->sep_info_idx = 0;
+        p_scb->wait &= ~(BTA_AV_WAIT_ACP_CAPS_ON|BTA_AV_WAIT_ACP_CAPS_STARTED);
+        if (old_wait & BTA_AV_WAIT_ACP_CAPS_STARTED)
+        {
+            bta_av_start_ok (p_scb, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_set_use_rc
+**
+** Description      set to use AVRC for this stream control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_set_use_rc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    p_scb->use_rc = TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_cco_close
+**
+** Description      call close call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_cco_close (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT16 mtu;
+    mtu = bta_av_chk_mtu(p_scb, BTA_AV_MAX_A2DP_MTU);
+
+    p_scb->p_cos->close(p_scb->hndl, p_scb->codec_type, mtu);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_open_failed
+**
+** Description      Failed to open an AVDT stream
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_open_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    p_scb->open_status = BTA_AV_FAIL_STREAM;
+    bta_av_cco_close(p_scb, p_data);
+    AVDT_DisconnectReq(p_scb->peer_addr, bta_av_dt_cback[p_scb->hdi]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_getcap_results
+**
+** Description      Handle the AVDTP get capabilities results.  Check the codec
+**                  type and see if it matches ours.  If it does not, get the
+**                  capabilities of the next stream, if any.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_getcap_results (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tAVDT_CFG   cfg;
+    UINT8       media_type;
+    tAVDT_SEP_INFO  *p_info = &p_scb->sep_info[p_scb->sep_info_idx];
+
+    memcpy(&cfg, &p_scb->cfg, sizeof(tAVDT_CFG));
+    cfg.num_codec = 1;
+    cfg.num_protect = p_scb->p_cap->num_protect;
+    memcpy(cfg.codec_info, p_scb->p_cap->codec_info, AVDT_CODEC_SIZE);
+    memcpy(cfg.protect_info, p_scb->p_cap->protect_info, AVDT_PROTECT_SIZE);
+    media_type = p_scb->p_cap->codec_info[BTA_AV_MEDIA_TYPE_IDX] >> 4;
+
+    APPL_TRACE_DEBUG1("num_codec %d", p_scb->p_cap->num_codec);
+    APPL_TRACE_DEBUG2("media type x%x, x%x", media_type, p_scb->media_type);
+#if AVDT_MULTIPLEXING == TRUE
+    APPL_TRACE_DEBUG2("mux x%x, x%x", cfg.mux_mask, p_scb->p_cap->mux_mask);
+#endif
+
+    /* if codec present and we get a codec configuration */
+    if ((p_scb->p_cap->num_codec != 0) &&
+        (media_type == p_scb->media_type) &&
+        (p_scb->p_cos->getcfg(p_scb->hndl, p_scb->p_cap->codec_info[BTA_AV_CODEC_TYPE_IDX],
+            cfg.codec_info, &p_scb->sep_info_idx, p_info->seid,
+            &cfg.num_protect, cfg.protect_info) == 0))
+    {
+#if AVDT_MULTIPLEXING == TRUE
+        cfg.mux_mask &= p_scb->p_cap->mux_mask;
+        APPL_TRACE_DEBUG1("mux_mask used x%x", cfg.mux_mask);
+#endif
+        /* save copy of codec type and configuration */
+        p_scb->codec_type = cfg.codec_info[BTA_AV_CODEC_TYPE_IDX];
+        memcpy(&p_scb->cfg, &cfg, sizeof(tAVDT_CFG));
+        bta_av_adjust_seps_idx(p_scb);
+        /* use only the services peer supports */
+        cfg.psc_mask &= p_scb->p_cap->psc_mask;
+        p_scb->cur_psc_mask = cfg.psc_mask;
+
+        /* open the stream */
+        AVDT_OpenReq(p_scb->seps[p_scb->sep_idx].av_handle, p_scb->peer_addr,
+                     p_scb->sep_info[p_scb->sep_info_idx].seid, &cfg);
+
+        if (!bta_av_is_rcfg_sst(p_scb))
+        {
+            /* free capabilities buffer */
+            utl_freebuf((void **) &p_scb->p_cap);
+        }
+    }
+    else
+    {
+        /* try the next stream, if any */
+        p_scb->sep_info_idx++;
+        bta_av_next_getcap(p_scb, p_data);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_setconfig_rej
+**
+** Description      Send AVDTP set config reject.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_setconfig_rej (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_REJECT reject;
+
+    APPL_TRACE_DEBUG0("bta_av_setconfig_rej");
+    AVDT_ConfigRsp(p_data->str_msg.handle, p_data->str_msg.msg.hdr.label, AVDT_ERR_BAD_STATE, 0);
+    bdcpy(reject.bd_addr, p_data->str_msg.bd_addr);
+    reject.hndl = p_scb->hndl;
+    (*bta_av_cb.p_cback)(BTA_AV_REJECT_EVT, (tBTA_AV *) &reject);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_discover_req
+**
+** Description      Send an AVDTP discover request to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_discover_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    /* send avdtp discover request */
+
+    AVDT_DiscoverReq(p_scb->peer_addr, p_scb->sep_info, BTA_AV_NUM_SEPS, bta_av_dt_cback[p_scb->hdi]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_conn_failed
+**
+** Description      AVDTP connection failed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_conn_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    p_scb->open_status = BTA_AV_FAIL_STREAM;
+    bta_av_str_closed(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_do_start
+**
+** Description      Start stream.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_do_start (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8 policy = HCI_ENABLE_SNIFF_MODE;
+    UINT8       cur_role;
+
+    APPL_TRACE_DEBUG3("bta_av_do_start sco_occupied:%d, role:x%x, started:%d", bta_av_cb.sco_occupied, p_scb->role, p_scb->started);
+    if (bta_av_cb.sco_occupied)
+    {
+        bta_av_start_failed(p_scb, p_data);
+        return;
+    }
+
+    /* disallow role switch during streaming, only if we are the master role
+     * i.e. allow role switch, if we are slave.
+     * It would not hurt us, if the peer device wants us to be master */
+    if ((BTM_GetRole (p_scb->peer_addr, &cur_role) == BTM_SUCCESS) &&
+        (cur_role == BTM_ROLE_MASTER) )
+    {
+        policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+    }
+
+    bta_sys_clear_policy(BTA_ID_AV, policy, p_scb->peer_addr);
+
+    if ((p_scb->started == FALSE) && ((p_scb->role & BTA_AV_ROLE_START_INT) == 0))
+    {
+        p_scb->role |= BTA_AV_ROLE_START_INT;
+        bta_sys_busy(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+
+        AVDT_StartReq(&p_scb->avdt_handle, 1);
+    }
+    else
+    {
+        bta_av_start_ok(p_scb, NULL);
+    }
+    APPL_TRACE_DEBUG2("started %d role:x%x", p_scb->started, p_scb->role);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_str_stopped
+**
+** Description      Stream stopped.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_str_stopped (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SUSPEND suspend_rsp;
+    UINT8   start = p_scb->started;
+    BOOLEAN sus_evt = TRUE;
+    BT_HDR  *p_buf;
+    UINT8 policy = HCI_ENABLE_SNIFF_MODE;
+
+    APPL_TRACE_ERROR2("bta_av_str_stopped:audio_open_cnt=%d, p_data %x",
+            bta_av_cb.audio_open_cnt, p_data);
+
+    bta_sys_idle(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+    if ((bta_av_cb.features & BTA_AV_FEAT_MASTER) == 0 || bta_av_cb.audio_open_cnt == 1)
+        policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+    bta_sys_set_policy(BTA_ID_AV, policy, p_scb->peer_addr);
+
+    if(p_scb->co_started)
+    {
+        bta_av_stream_chg(p_scb, FALSE);
+        p_scb->co_started = FALSE;
+
+        p_scb->p_cos->stop(p_scb->hndl, p_scb->codec_type);
+        L2CA_SetFlushTimeout(p_scb->peer_addr, L2CAP_DEFAULT_FLUSH_TO);
+    }
+
+    /* if q_info.a2d is not empty, drop it now */
+    if(BTA_AV_CHNL_AUDIO == p_scb->chnl)
+    {
+        while((p_buf = (BT_HDR*)GKI_dequeue (&p_scb->q_info.a2d)) != NULL)
+        GKI_freebuf(p_buf);
+
+    /* drop the audio buffers queued in L2CAP */
+        if(p_data && p_data->api_stop.flush)
+            L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_ALL);
+    }
+
+    suspend_rsp.chnl = p_scb->chnl;
+    suspend_rsp.hndl = p_scb->hndl;
+
+    if (p_data && p_data->api_stop.suspend)
+    {
+        APPL_TRACE_DEBUG2("suspending: %d, sup:%d", start, p_scb->suspend_sup);
+        if ((start)  && (p_scb->suspend_sup))
+        {
+            sus_evt = FALSE;
+            p_scb->l2c_bufs = 0;
+            AVDT_SuspendReq(&p_scb->avdt_handle, 1);
+        }
+
+        if(sus_evt)
+        {
+            suspend_rsp.status = BTA_AV_SUCCESS;
+            suspend_rsp.initiator = TRUE;
+            (*bta_av_cb.p_cback)(BTA_AV_SUSPEND_EVT, (tBTA_AV *) &suspend_rsp);
+        }
+    }
+    else
+    {
+        suspend_rsp.status = BTA_AV_SUCCESS;
+        suspend_rsp.initiator = TRUE;
+        APPL_TRACE_EVENT1("bta_av_str_stopped status %d", suspend_rsp.status);
+
+        (*bta_av_cb.p_cback)(BTA_AV_STOP_EVT, (tBTA_AV *) &suspend_rsp);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_reconfig
+**
+** Description      process the reconfigure request.
+**                  save the parameter in control block and
+**                  suspend, reconfigure or close the stream
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_reconfig (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tAVDT_CFG   *p_cfg;
+    tBTA_AV_API_STOP    stop;
+    tBTA_AV_RECONFIG    evt;
+    tBTA_AV_API_RCFG    *p_rcfg = &p_data->api_reconfig;
+
+    APPL_TRACE_DEBUG4("bta_av_reconfig r:%d, s:%d idx: %d (o:%d)",
+        p_scb->recfg_sup, p_scb->suspend_sup,
+        p_scb->rcfg_idx, p_scb->sep_info_idx);
+
+    p_scb->num_recfg = 0;
+    /* store the new configuration in control block */
+    if (p_scb->p_cap == NULL)
+    {
+        p_scb->p_cap = (tAVDT_CFG *) GKI_getbuf(sizeof(tAVDT_CFG));
+    }
+    if((p_cfg = p_scb->p_cap) == NULL)
+    {
+        /* report failure */
+        evt.status = BTA_AV_FAIL_RESOURCES;
+        evt.chnl   = p_scb->chnl;
+        evt.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_RECONFIG_EVT, (tBTA_AV *)&evt);
+
+        /* this event is not possible in this state.
+         * use it to bring the SSM back to open state */
+        bta_av_ssm_execute(p_scb, BTA_AV_SDP_DISC_OK_EVT, NULL);
+        return;
+    }
+
+    /*if(bta_av_cb.features & BTA_AV_FEAT_RCCT)*/
+        bta_sys_stop_timer(&p_scb->timer);
+
+    memcpy(p_cfg, &p_scb->cfg, sizeof(tAVDT_CFG));
+    p_cfg->num_protect = p_rcfg->num_protect;
+    memcpy(p_cfg->codec_info, p_rcfg->codec_info, AVDT_CODEC_SIZE);
+    memcpy(p_cfg->protect_info, p_rcfg->p_protect_info, p_rcfg->num_protect);
+    p_scb->rcfg_idx = p_rcfg->sep_info_idx;
+    p_scb->p_cap->psc_mask = p_scb->cur_psc_mask;
+
+    /* if the requested index differs from the current one, we can only close/open */
+    if ((p_scb->rcfg_idx == p_scb->sep_info_idx) &&
+        (p_rcfg->suspend)&& (p_scb->recfg_sup) && (p_scb->suspend_sup))
+    {
+        if(p_scb->started)
+        {
+            stop.flush   = FALSE;
+            stop.suspend = TRUE;
+            bta_av_str_stopped(p_scb, (tBTA_AV_DATA *)&stop);
+        }
+        else
+        {
+            APPL_TRACE_DEBUG0("Reconfig");
+            AVDT_ReconfigReq(p_scb->avdt_handle, p_scb->p_cap);
+            p_scb->p_cap->psc_mask = p_scb->cur_psc_mask;
+        }
+    }
+    else
+    {
+        /* close the stream */
+        APPL_TRACE_DEBUG1("close/open num_protect: %d", p_cfg->num_protect);
+        if(p_scb->started)
+            bta_av_str_stopped(p_scb, NULL);
+            p_scb->started = FALSE;
+
+            /* drop the buffers queued in L2CAP */
+            L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_ALL);
+
+            AVDT_CloseReq(p_scb->avdt_handle);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_data_path
+**
+** Description      Handle stream data path.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_data_path (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    BT_HDR  *p_buf;
+    UINT32  data_len;
+    UINT32  timestamp;
+    BOOLEAN new_buf = FALSE;
+    UINT8   m_pt = 0x60 | p_scb->codec_type;
+
+    if (!p_scb->cong)
+    {
+        /*
+        APPL_TRACE_ERROR1("q: %d", p_scb->l2c_bufs);
+        */
+        //Always get the current number of bufs que'd up
+        p_scb->l2c_bufs = (UINT8)L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_GET);
+
+        p_buf = (BT_HDR *)GKI_dequeue (&p_scb->q_info.a2d);
+        if(p_buf)
+        {
+            /* use q_info.a2d data, read the timestamp */
+            timestamp = *(UINT32 *)(p_buf + 1);
+        }
+        else
+        {
+            new_buf = TRUE;
+            /* q_info.a2d empty, call co_data, dup data to other channels */
+            p_buf = (BT_HDR *)p_scb->p_cos->data(p_scb->codec_type, &data_len,
+                                             &timestamp);
+
+            if (p_buf)
+            {
+                /* use the offset area for the time stamp */
+                *(UINT32 *)(p_buf + 1) = timestamp;
+
+                /* dup the data to other channels */
+                bta_av_dup_audio_buf(p_scb, p_buf);
+            }
+        }
+
+        if(p_buf)
+        {
+            if(p_scb->l2c_bufs < (BTA_AV_QUEUE_DATA_CHK_NUM))
+            {
+                /* there's a buffer, just queue it to L2CAP */
+                /*  There's no need to increment it here, it is always read from L2CAP see above */
+                /* p_scb->l2c_bufs++; */
+                /*
+                APPL_TRACE_ERROR1("qw: %d", p_scb->l2c_bufs);
+                */
+                AVDT_WriteReq(p_scb->avdt_handle, p_buf, timestamp, m_pt);
+                p_scb->cong = TRUE;
+            }
+            else
+            {
+                /* there's a buffer, but L2CAP does not seem to be moving data */
+                if(new_buf)
+                {
+                    /* just got this buffer from co_data,
+                     * put it in queue */
+                    GKI_enqueue(&p_scb->q_info.a2d, p_buf);
+                }
+                else
+                {
+                    /* just dequeue it from the q_info.a2d */
+                    if(p_scb->q_info.a2d.count < 3)
+                    {
+                        /* put it back to the queue */
+                        GKI_enqueue_head (&p_scb->q_info.a2d, p_buf);
+                    }
+                    else
+                    {
+                        /* too many buffers in q_info.a2d, drop it. */
+                        bta_av_co_audio_drop(p_scb->hndl);
+                        GKI_freebuf(p_buf);
+                    }
+                }
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_start_ok
+**
+** Description      Stream started.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_start_ok (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_START   start;
+    tBTA_AV_API_STOP stop;
+    BOOLEAN         initiator = FALSE;
+    BOOLEAN         suspend = FALSE;
+    UINT16          flush_to;
+    UINT8           new_role = p_scb->role;
+    BT_HDR          hdr;
+
+    APPL_TRACE_DEBUG2("bta_av_start_ok wait:x%x, role:x%x", p_scb->wait, p_scb->role);
+
+    p_scb->started = TRUE;
+    if (p_scb->sco_suspend)
+    {
+        p_scb->sco_suspend = FALSE;
+    }
+
+    if (new_role & BTA_AV_ROLE_START_INT)
+        initiator = TRUE;
+
+    if (p_scb->wait & BTA_AV_WAIT_ROLE_SW_FAILED)
+    {
+        /* role switch has failed */
+        p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_FAILED;
+        p_data = (tBTA_AV_DATA *)&hdr;
+        hdr.offset = BTA_AV_RS_FAIL;
+    }
+    APPL_TRACE_DEBUG1("wait:x%x", p_scb->wait);
+
+    if (p_data && (p_data->hdr.offset != BTA_AV_RS_NONE))
+    {
+        p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+        if (p_data->hdr.offset == BTA_AV_RS_FAIL)
+        {
+            bta_sys_idle(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+            start.chnl   = p_scb->chnl;
+            start.status = BTA_AV_FAIL_ROLE;
+            start.hndl   = p_scb->hndl;
+            start.initiator = initiator;
+            (*bta_av_cb.p_cback)(BTA_AV_START_EVT, (tBTA_AV *) &start);
+            return;
+        }
+    }
+
+    if (!bta_av_link_role_ok(p_scb, A2D_SET_ONE_BIT))
+        p_scb->q_tag = BTA_AV_Q_TAG_START;
+    else
+    {
+        /* The wait flag may be set here while we are already master on the link */
+        /* this could happen if a role switch complete event occurred during reconfig */
+        /* if we are now master on the link, there is no need to wait for the role switch, */
+        /* complete anymore so we can clear the wait for role switch flag */
+        p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+    }
+
+    if (p_scb->wait & (BTA_AV_WAIT_ROLE_SW_RES_OPEN|BTA_AV_WAIT_ROLE_SW_RES_START))
+    {
+        p_scb->wait |= BTA_AV_WAIT_ROLE_SW_STARTED;
+        p_scb->q_tag = BTA_AV_Q_TAG_START;
+    }
+
+    if (p_scb->wait & BTA_AV_WAIT_ACP_CAPS_ON)
+    {
+        p_scb->wait |= BTA_AV_WAIT_ACP_CAPS_STARTED;
+    }
+
+    if (p_scb->wait)
+    {
+        APPL_TRACE_DEBUG2("wait:x%x q_tag:%d- not started", p_scb->wait, p_scb->q_tag);
+        return;
+    }
+
+    /* tell role manager to check M/S role */
+    bta_sys_conn_open(BTA_ID_AV, p_scb->app_id, p_scb->peer_addr);
+
+    bta_sys_busy(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+
+    if(p_scb->media_type == AVDT_MEDIA_AUDIO)
+    {
+        /* in normal logic, conns should be bta_av_cb.audio_count - 1,
+         * However, bta_av_stream_chg is not called to increase bta_av_cb.audio_count yet.
+         * If the code were to be re-arranged for some reasons, this number may need to be changed
+         */
+        p_scb->co_started = bta_av_cb.audio_open_cnt;
+        flush_to = p_bta_av_cfg->p_audio_flush_to[p_scb->co_started - 1];
+    }
+    else
+    {
+        flush_to = p_bta_av_cfg->video_flush_to;
+    }
+    L2CA_SetFlushTimeout(p_scb->peer_addr, flush_to );
+
+    /* clear the congestion flag */
+    p_scb->cong = FALSE;
+
+    if (new_role & BTA_AV_ROLE_START_INT)
+    {
+        new_role &= ~BTA_AV_ROLE_START_INT;
+    }
+    else if ((new_role & BTA_AV_ROLE_AD_ACP) && (new_role & BTA_AV_ROLE_SUSPEND_OPT))
+    {
+        suspend = TRUE;
+    }
+
+    if (!suspend)
+    {
+        p_scb->q_tag = BTA_AV_Q_TAG_STREAM;
+        bta_av_stream_chg(p_scb, TRUE);
+    }
+
+    {
+        p_scb->role = new_role;
+        p_scb->role &= ~BTA_AV_ROLE_AD_ACP;
+        p_scb->role &= ~BTA_AV_ROLE_SUSPEND_OPT;
+
+        p_scb->p_cos->start(p_scb->hndl, p_scb->codec_type);
+        p_scb->co_started = TRUE;
+
+        APPL_TRACE_DEBUG3("bta_av_start_ok suspending: %d, role:x%x, init %d",
+            suspend, p_scb->role, initiator);
+
+        start.suspending = suspend;
+        start.initiator = initiator;
+        start.chnl   = p_scb->chnl;
+        start.status = BTA_AV_SUCCESS;
+        start.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_START_EVT, (tBTA_AV *) &start);
+
+        if(suspend)
+        {
+            p_scb->role |= BTA_AV_ROLE_SUSPEND;
+            p_scb->cong = TRUE;  /* do not allow the media data to go through */
+            /* do not duplicate the media packets to this channel */
+            p_scb->p_cos->stop(p_scb->hndl, p_scb->codec_type);
+            p_scb->co_started = FALSE;
+            stop.flush   = FALSE;
+            stop.suspend = TRUE;
+            bta_av_ssm_execute(p_scb, BTA_AV_AP_STOP_EVT, (tBTA_AV_DATA *)&stop);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_start_failed
+**
+** Description      Stream start failed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_start_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_START   start;
+
+    if(p_scb->started == FALSE && p_scb->co_started == FALSE)
+    {
+        /* if start failed, clear role */
+        p_scb->role &= ~BTA_AV_ROLE_START_INT;
+
+        bta_sys_idle(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+        start.chnl   = p_scb->chnl;
+        start.status = BTA_AV_FAIL;
+        start.initiator = TRUE;
+        start.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_START_EVT, (tBTA_AV *) &start);
+    }
+
+    bta_sys_set_policy(BTA_ID_AV, (HCI_ENABLE_SNIFF_MODE|HCI_ENABLE_MASTER_SLAVE_SWITCH), p_scb->peer_addr);
+    p_scb->sco_suspend = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_str_closed
+**
+** Description      Stream closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_str_closed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV     data;
+    tBTA_AV_EVT event;
+    UINT16      mtu;
+    UINT8 policy = HCI_ENABLE_SNIFF_MODE;
+
+    if ((bta_av_cb.features & BTA_AV_FEAT_MASTER) == 0 || bta_av_cb.audio_open_cnt == 1)
+        policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+    bta_sys_set_policy(BTA_ID_AV, policy, p_scb->peer_addr);
+    if (bta_av_cb.audio_open_cnt <= 1)
+    {
+        /* last connection - restore the allow switch flag */
+        L2CA_SetDesireRole(L2CAP_ROLE_ALLOW_SWITCH);
+    }
+
+    if (p_scb->open_status)
+    {
+        /* must be failure when opening the stream */
+        bdcpy(data.open.bd_addr, p_scb->peer_addr);
+        data.open.status = p_scb->open_status;
+        data.open.chnl   = p_scb->chnl;
+        data.open.hndl   = p_scb->hndl;
+        event = BTA_AV_OPEN_EVT;
+        p_scb->open_status = BTA_AV_SUCCESS;
+
+        bta_sys_conn_close(BTA_ID_AV, p_scb->app_id, p_scb->peer_addr);
+        bta_av_cleanup(p_scb, p_data);
+        (*bta_av_cb.p_cback)(event, &data);
+    }
+    else
+    {
+        /* do stop if we were started */
+        if (p_scb->co_started)
+        {
+            bta_av_str_stopped(p_scb, NULL);
+        }
+
+        /* Update common mtu shared by remaining connectons */
+        mtu = bta_av_chk_mtu(p_scb, BTA_AV_MAX_A2DP_MTU);
+
+        {
+            p_scb->p_cos->close(p_scb->hndl, p_scb->codec_type, mtu);
+            data.close.chnl = p_scb->chnl;
+            data.close.hndl = p_scb->hndl;
+            event = BTA_AV_CLOSE_EVT;
+
+            bta_sys_conn_close(BTA_ID_AV, p_scb->app_id, p_scb->peer_addr);
+            bta_av_cleanup(p_scb, p_data);
+            (*bta_av_cb.p_cback)(event, &data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_clr_cong
+**
+** Description      Clear stream congestion flag.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_clr_cong (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    if(p_scb->co_started)
+        p_scb->cong = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_suspend_cfm
+**
+** Description      process the suspend response
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_suspend_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SUSPEND suspend_rsp;
+    UINT8           err_code = p_data->str_msg.msg.hdr.err_code;
+    UINT8 policy = HCI_ENABLE_SNIFF_MODE;
+
+    APPL_TRACE_DEBUG2 ("bta_av_suspend_cfm:audio_open_cnt = %d, err_code = %d",
+        bta_av_cb.audio_open_cnt, err_code);
+
+    suspend_rsp.status = BTA_AV_SUCCESS;
+    if(err_code)
+    {
+        p_scb->suspend_sup = FALSE;
+        suspend_rsp.status = BTA_AV_FAIL;
+
+        APPL_TRACE_ERROR0 ("bta_av_suspend_cfm: suspend failed, closing connection");
+
+        /* SUSPEND failed. Close connection. */
+        bta_av_ssm_execute(p_scb, BTA_AV_API_CLOSE_EVT, NULL);
+    }
+    else
+    {
+        /* only set started to FALSE when suspend is successful */
+        p_scb->started = FALSE;
+    }
+
+    if(p_scb->role & BTA_AV_ROLE_SUSPEND)
+    {
+        p_scb->role &= ~BTA_AV_ROLE_SUSPEND;
+        p_scb->cong = FALSE;
+    }
+
+    bta_sys_idle(BTA_ID_AV, bta_av_cb.audio_open_cnt, p_scb->peer_addr);
+    if ((bta_av_cb.features & BTA_AV_FEAT_MASTER) == 0 || bta_av_cb.audio_open_cnt == 1)
+        policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+    bta_sys_set_policy(BTA_ID_AV, policy, p_scb->peer_addr);
+
+    /* in case that we received suspend_ind, we may need to call co_stop here */
+    if(p_scb->co_started)
+    {
+        bta_av_stream_chg(p_scb, FALSE);
+
+        {
+            p_scb->co_started = FALSE;
+            p_scb->p_cos->stop(p_scb->hndl, p_scb->codec_type);
+        }
+        L2CA_SetFlushTimeout(p_scb->peer_addr, L2CAP_DEFAULT_FLUSH_TO);
+    }
+
+    {
+        suspend_rsp.chnl = p_scb->chnl;
+        suspend_rsp.hndl = p_scb->hndl;
+        suspend_rsp.initiator = p_data->str_msg.initiator;
+        (*bta_av_cb.p_cback)(BTA_AV_SUSPEND_EVT, (tBTA_AV *) &suspend_rsp);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_str_ok
+**
+** Description      report reconfigure successful
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_str_ok (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RECONFIG    evt;
+
+    p_scb->l2c_cid      = AVDT_GetL2CapChannel(p_scb->avdt_handle);
+    APPL_TRACE_DEBUG1("bta_av_rcfg_str_ok: l2c_cid: %d", p_scb->l2c_cid);
+
+    /* rc listen */
+    bta_av_st_rc_timer(p_scb, NULL);
+    utl_freebuf((void **)&p_scb->p_cap);
+
+    /* No need to keep the role bits once reconfig is done. */
+    p_scb->role &= ~BTA_AV_ROLE_AD_ACP;
+    p_scb->role &= ~BTA_AV_ROLE_SUSPEND_OPT;
+    p_scb->role &= ~BTA_AV_ROLE_START_INT;
+
+    {
+        /* reconfigure success  */
+        evt.status = BTA_AV_SUCCESS;
+        evt.chnl   = p_scb->chnl;
+        evt.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_RECONFIG_EVT, (tBTA_AV *)&evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_failed
+**
+** Description      process reconfigure failed
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RECONFIG evt;
+
+    APPL_TRACE_DEBUG2("bta_av_rcfg_failed num_recfg: %d, conn_lcb:0x%x",
+        p_scb->num_recfg, bta_av_cb.conn_lcb);
+    if(p_scb->num_recfg > BTA_AV_RECONFIG_RETRY)
+    {
+        bta_av_cco_close(p_scb, p_data);
+        /* report failure */
+        evt.status = BTA_AV_FAIL_STREAM;
+        evt.chnl   = p_scb->chnl;
+        evt.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_RECONFIG_EVT, (tBTA_AV *)&evt);
+        /* go to closing state */
+        bta_av_ssm_execute(p_scb, BTA_AV_API_CLOSE_EVT, NULL);
+    }
+    else
+    {
+        /* open failed. try again */
+        p_scb->num_recfg++;
+        if(bta_av_cb.conn_lcb)
+        {
+            AVDT_DisconnectReq(p_scb->peer_addr, bta_av_dt_cback[p_scb->hdi]);
+        }
+        else
+        {
+            bta_av_connect_req(p_scb, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_connect
+**
+** Description      stream closed. reconnect the stream
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_connect (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    p_scb->cong    = FALSE;
+    p_scb->num_recfg++;
+    APPL_TRACE_DEBUG1("bta_av_rcfg_connect num_recfg: %d", p_scb->num_recfg);
+    if(p_scb->num_recfg > BTA_AV_RECONFIG_RETRY)
+    {
+        /* let bta_av_rcfg_failed report fail */
+        bta_av_rcfg_failed(p_scb, NULL);
+    }
+    else
+        AVDT_ConnectReq(p_scb->peer_addr, p_scb->sec_mask, bta_av_dt_cback[p_scb->hdi]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_discntd
+**
+** Description      AVDT disconnected. reconnect the stream
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_discntd (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RECONFIG    evt;
+
+    APPL_TRACE_DEBUG1("bta_av_rcfg_discntd num_recfg: %d", p_scb->num_recfg);
+    p_scb->num_recfg++;
+    if(p_scb->num_recfg > BTA_AV_RECONFIG_RETRY)
+    {
+        /* report failure */
+        evt.status = BTA_AV_FAIL_STREAM;
+        evt.chnl   = p_scb->chnl;
+        evt.hndl   = p_scb->hndl;
+        (*bta_av_cb.p_cback)(BTA_AV_RECONFIG_EVT, (tBTA_AV *)&evt);
+        /* report close event & go to init state */
+        bta_av_ssm_execute(p_scb, BTA_AV_STR_DISC_FAIL_EVT, NULL);
+    }
+    else
+        AVDT_ConnectReq(p_scb->peer_addr, p_scb->sec_mask, bta_av_dt_cback[p_scb->hdi]);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_suspend_cont
+**
+** Description      received the suspend response.
+**                  continue to reconfigure the stream
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_suspend_cont (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8       err_code = p_data->str_msg.msg.hdr.err_code;
+    tBTA_AV_RECONFIG    evt;
+
+    p_scb->started = FALSE;
+    p_scb->cong    = FALSE;
+    if(err_code)
+    {
+        if(AVDT_ERR_CONNECT == err_code)
+        {
+            /* report failure */
+            evt.status = BTA_AV_FAIL;
+            (*bta_av_cb.p_cback)(BTA_AV_RECONFIG_EVT, (tBTA_AV *)&evt);
+            bta_av_ssm_execute(p_scb, BTA_AV_STR_DISC_FAIL_EVT, NULL);
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("suspend rejected, try close");
+            p_scb->suspend_sup = FALSE;
+
+            /* drop the buffers queued in L2CAP */
+            L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_ALL);
+
+            AVDT_CloseReq(p_scb->avdt_handle);
+        }
+    }
+    else
+    {
+        APPL_TRACE_DEBUG0("bta_av_suspend_cont calling AVDT_ReconfigReq");
+        /* reconfig the stream */
+
+        AVDT_ReconfigReq(p_scb->avdt_handle, p_scb->p_cap);
+        p_scb->p_cap->psc_mask = p_scb->cur_psc_mask;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_cfm
+**
+** Description      if reconfigure is successful, report the event
+**                  otherwise, close the stream.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    UINT8   err_code = p_data->str_msg.msg.hdr.err_code;
+
+    /*
+    APPL_TRACE_DEBUG0("bta_av_rcfg_cfm");
+    */
+    if(err_code)
+    {
+        APPL_TRACE_ERROR0("reconfig rejected, try close");
+        p_scb->recfg_sup = FALSE;
+        /* started flag is FALSE when reconfigure command is sent */
+        /* drop the buffers queued in L2CAP */
+        L2CA_FlushChannel (p_scb->l2c_cid, L2CAP_FLUSH_CHANS_ALL);
+        AVDT_CloseReq(p_scb->avdt_handle);
+    }
+    else
+    {
+        /* take the SSM back to OPEN state */
+        bta_av_ssm_execute(p_scb, BTA_AV_STR_OPEN_OK_EVT, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rcfg_open
+**
+** Description      AVDT is connected. open the stream with the new configuration
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rcfg_open (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    APPL_TRACE_DEBUG1("bta_av_rcfg_open, num_disc_snks = %d", p_scb->num_disc_snks);
+
+    if (p_scb->num_disc_snks == 0)
+    {
+        /* Need to update call-out module so that it will be ready for discover */
+        p_scb->p_cos->stop(p_scb->hndl, p_scb->codec_type);
+
+        /* send avdtp discover request */
+        AVDT_DiscoverReq(p_scb->peer_addr, p_scb->sep_info, BTA_AV_NUM_SEPS, bta_av_dt_cback[p_scb->hdi]);
+    }
+    else
+    {
+        p_scb->codec_type = p_scb->p_cap->codec_info[BTA_AV_CODEC_TYPE_IDX];
+        memcpy(p_scb->cfg.codec_info, p_scb->p_cap->codec_info, AVDT_CODEC_SIZE);
+        /* we may choose to use a different SEP at reconfig.
+         * adjust the sep_idx now */
+        bta_av_adjust_seps_idx(p_scb);
+
+        /* open the stream with the new config */
+        p_scb->sep_info_idx = p_scb->rcfg_idx;
+        AVDT_OpenReq(p_scb->avdt_handle, p_scb->peer_addr,
+                     p_scb->sep_info[p_scb->sep_info_idx].seid, p_scb->p_cap);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_security_rej
+**
+** Description      Send an AVDTP security reject.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_security_rej (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    AVDT_SecurityRsp(p_scb->avdt_handle, p_scb->avdt_label, AVDT_ERR_BAD_STATE,
+                     NULL, 0);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_chk_2nd_start
+**
+** Description      check if this is 2nd stream and if it needs to be started.
+**                  This function needs to be kept very similar to bta_av_chk_start
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_chk_2nd_start (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SCB *p_scbi;
+    int i;
+    BOOLEAN new_started = FALSE;
+
+
+    if ((p_scb->chnl == BTA_AV_CHNL_AUDIO) && (bta_av_cb.audio_open_cnt >= 2))
+    {
+        /* more than one audio channel is connected */
+        if (!(p_scb->role & BTA_AV_ROLE_SUSPEND_OPT))
+        {
+            /* this channel does not need to be reconfigured.
+             * if there is other channel streaming, start the stream now */
+            for(i=0; i<BTA_AV_NUM_STRS; i++)
+            {
+                p_scbi = bta_av_cb.p_scb[i];
+                if(p_scbi && p_scbi->chnl == BTA_AV_CHNL_AUDIO && p_scbi->co_started)
+                {
+                    if (!new_started)
+                    {
+                        /* start the new stream */
+                        new_started = TRUE;
+                        bta_av_ssm_execute(p_scb, BTA_AV_AP_START_EVT, NULL);
+                    }
+                    /* may need to update the flush timeout of this already started stream */
+                    if (p_scbi->co_started != bta_av_cb.audio_open_cnt)
+                    {
+                        p_scbi->co_started = bta_av_cb.audio_open_cnt;
+                        L2CA_SetFlushTimeout(p_scbi->peer_addr, p_bta_av_cfg->p_audio_flush_to[p_scbi->co_started - 1] );
+                    }
+                }
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_open_rc
+**
+** Description      Send a message to main SM to open RC channel.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_open_rc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_START   start;
+
+    APPL_TRACE_DEBUG3("bta_av_open_rc use_rc: %d, wait: x%x role:x%x", p_scb->use_rc, p_scb->wait, p_scb->role);
+    if ((p_scb->wait & BTA_AV_WAIT_ROLE_SW_BITS) && (p_scb->q_tag == BTA_AV_Q_TAG_START))
+    {
+        /* waiting for role switch for some reason & the timer expires */
+        if (!bta_av_link_role_ok(p_scb, A2D_SET_ONE_BIT))
+        {
+            APPL_TRACE_ERROR0 ("failed to start streaming for role management reasons!!");
+            bta_sys_stop_timer(&p_scb->timer);
+            start.chnl   = p_scb->chnl;
+            start.status = BTA_AV_FAIL_ROLE;
+            start.initiator = TRUE;
+            start.hndl   = p_scb->hndl;
+            p_scb->wait &= ~BTA_AV_WAIT_ROLE_SW_BITS;
+            bta_av_cb.rs_idx = 0;
+            (*bta_av_cb.p_cback)(BTA_AV_START_EVT, (tBTA_AV *) &start);
+        }
+        else
+        {
+            /* role switch is done. continue to start streaming */
+            bta_av_cb.rs_idx = 0;
+            p_data->hdr.offset = BTA_AV_RS_OK;
+            bta_av_start_ok (p_scb, p_data);
+        }
+        return;
+    }
+
+    if(p_scb->use_rc == TRUE || (p_scb->role & BTA_AV_ROLE_AD_ACP) )
+    {
+        if(bta_av_cb.disc)
+        {
+            /* AVRC discover db is in use */
+            if(p_scb->rc_handle == BTA_AV_RC_HANDLE_NONE)
+            {
+                /* AVRC channel is not connected. delay a little bit */
+                if ((p_scb->wait & BTA_AV_WAIT_ROLE_SW_BITS) == 0)
+                    bta_sys_start_timer(&p_scb->timer, BTA_AV_AVRC_TIMER_EVT, BTA_AV_RC_DISC_TIME_VAL);
+                else
+                    p_scb->wait |= BTA_AV_WAIT_CHECK_RC;
+            }
+        }
+        else
+        {
+            /* use main SM for AVRC SDP activities */
+            bta_av_rc_disc((UINT8)(p_scb->hdi + 1));
+        }
+    }
+    else
+    {
+        if(BTA_AV_RC_HANDLE_NONE != p_scb->rc_handle)
+        {
+            /* the open API said that this handle does not want a RC connection.
+             * disconnect it now */
+            AVRC_Close(p_scb->rc_handle);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_open_at_inc
+**
+** Description      This function is called if API open is called by application
+**                  while state-machine is at incoming state.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_open_at_inc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_API_OPEN  *p_buf;
+
+    memcpy (&(p_scb->open_api), &(p_data->api_open), sizeof(tBTA_AV_API_OPEN));
+
+    if (p_scb->coll_mask & BTA_AV_COLL_INC_TMR)
+    {
+        p_scb->coll_mask |= BTA_AV_COLL_API_CALLED;
+
+        /* API open will be handled at timeout if SNK did not start signalling. */
+        /* API open will be ignored if SNK starts signalling.                   */
+    }
+    else
+    {
+        /* SNK did not start signalling, API was called N seconds timeout. */
+        /* We need to switch to INIT state and start opening connection. */
+        p_scb->coll_mask = 0;
+        bta_av_set_scb_sst_init (p_scb);
+
+        if ((p_buf = (tBTA_AV_API_OPEN *) GKI_getbuf(sizeof(tBTA_AV_API_OPEN))) != NULL)
+        {
+            memcpy(p_buf, &(p_scb->open_api), sizeof(tBTA_AV_API_OPEN));
+            bta_sys_sendmsg(p_buf);
+        }
+    }
+}
+
+#endif /* BTA_AV_INCLUDED */
diff --git a/bta/av/bta_av_act.c b/bta/av/bta_av_act.c
new file mode 100644
index 0000000..a47921a
--- /dev/null
+++ b/bta/av/bta_av_act.c
@@ -0,0 +1,1941 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains action functions for advanced audio/video main state
+ *  machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#if defined(BTA_AV_INCLUDED) && (BTA_AV_INCLUDED == TRUE)
+
+#include <string.h>
+#include "bta_av_api.h"
+#include "bta_av_int.h"
+#include "avdt_api.h"
+#include "bd.h"
+#include "utl.h"
+#include "l2c_api.h"
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#include "bta_ar_api.h"
+#endif
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+/* the timer in milliseconds to wait for open req after setconfig for incoming connections */
+#ifndef BTA_AV_SIG_TIME_VAL
+#define BTA_AV_SIG_TIME_VAL 8000
+#endif
+
+/* In millisec to wait for signalling from SNK when it is initiated from SNK.   */
+/* If not, we will start signalling from SRC.                                   */
+#ifndef BTA_AV_ACP_SIG_TIME_VAL
+#define BTA_AV_ACP_SIG_TIME_VAL 2000
+#endif
+
+static void bta_av_acp_sig_timer_cback (TIMER_LIST_ENT *p_tle);
+
+/*******************************************************************************
+**
+** Function         bta_av_get_rcb_by_shdl
+**
+** Description      find the RCB associated with the given SCB handle.
+**
+** Returns          tBTA_AV_RCB
+**
+*******************************************************************************/
+tBTA_AV_RCB * bta_av_get_rcb_by_shdl(UINT8 shdl)
+{
+    tBTA_AV_RCB *p_rcb = NULL;
+    int         i;
+
+    for (i=0; i<BTA_AV_NUM_RCB; i++)
+    {
+        if (bta_av_cb.rcb[i].shdl == shdl && bta_av_cb.rcb[i].handle != BTA_AV_RC_HANDLE_NONE)
+        {
+            p_rcb = &bta_av_cb.rcb[i];
+            break;
+        }
+    }
+    return p_rcb;
+}
+#define BTA_AV_STS_NO_RSP       0xFF    /* a number not used by tAVRC_STS */
+
+/*******************************************************************************
+**
+** Function         bta_av_del_rc
+**
+** Description      delete the given AVRC handle.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_del_rc(tBTA_AV_RCB *p_rcb)
+{
+    tBTA_AV_SCB  *p_scb;
+    UINT8        rc_handle;      /* connected AVRCP handle */
+
+    if(p_rcb->handle != BTA_AV_RC_HANDLE_NONE)
+    {
+        if(p_rcb->shdl)
+        {
+            p_scb = bta_av_cb.p_scb[p_rcb->shdl - 1];
+            if(p_scb)
+            {
+                APPL_TRACE_DEBUG3("bta_av_del_rc shdl:%d, srch:%d rc_handle:%d", p_rcb->shdl,
+                                  p_scb->rc_handle, p_rcb->handle);
+                if(p_scb->rc_handle == p_rcb->handle)
+                    p_scb->rc_handle = BTA_AV_RC_HANDLE_NONE;
+                /* just in case the RC timer is active
+                if(bta_av_cb.features & BTA_AV_FEAT_RCCT && p_scb->chnl == BTA_AV_CHNL_AUDIO) */
+                    bta_sys_stop_timer(&p_scb->timer);
+            }
+        }
+
+        APPL_TRACE_EVENT4("bta_av_del_rc  handle: %d status=0x%x, rc_acp_handle:%d, idx:%d",
+            p_rcb->handle, p_rcb->status, bta_av_cb.rc_acp_handle, bta_av_cb.rc_acp_idx);
+        rc_handle = p_rcb->handle;
+        if(!(p_rcb->status & BTA_AV_RC_CONN_MASK) ||
+            ((p_rcb->status & BTA_AV_RC_ROLE_MASK) == BTA_AV_RC_ROLE_INT) )
+        {
+            p_rcb->status = 0;
+            p_rcb->handle = BTA_AV_RC_HANDLE_NONE;
+            p_rcb->shdl = 0;
+            p_rcb->lidx = 0;
+        }
+        /* else ACP && connected. do not clear the handle yet */
+        AVRC_Close(rc_handle);
+        if (rc_handle == bta_av_cb.rc_acp_handle)
+            bta_av_cb.rc_acp_handle = BTA_AV_RC_HANDLE_NONE;
+        APPL_TRACE_EVENT4("end del_rc handle: %d status=0x%x, rc_acp_handle:%d, lidx:%d",
+            p_rcb->handle, p_rcb->status, bta_av_cb.rc_acp_handle, p_rcb->lidx);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_av_close_all_rc
+**
+** Description      close the all AVRC handle.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_close_all_rc(tBTA_AV_CB *p_cb)
+{
+    int i;
+
+    for(i=0; i<BTA_AV_NUM_RCB; i++)
+    {
+        if ((p_cb->disabling == TRUE) || (bta_av_cb.rcb[i].shdl != 0))
+            bta_av_del_rc(&bta_av_cb.rcb[i]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_del_sdp_rec
+**
+** Description      delete the given SDP record handle.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_del_sdp_rec(UINT32 *p_sdp_handle)
+{
+    if(*p_sdp_handle != 0)
+    {
+        SDP_DeleteRecord(*p_sdp_handle);
+        *p_sdp_handle = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_avrc_sdp_cback
+**
+** Description      AVRCP service discovery callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_avrc_sdp_cback(UINT16 status)
+{
+    BT_HDR *p_msg;
+
+    if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_AV_SDP_AVRC_DISC_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_ctrl_cback
+**
+** Description      AVRCP control callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_rc_ctrl_cback(UINT8 handle, UINT8 event, UINT16 result, BD_ADDR peer_addr)
+{
+    tBTA_AV_RC_CONN_CHG *p_msg;
+    UINT16 msg_event = 0;
+
+#if (defined(BTA_AV_MIN_DEBUG_TRACES) && BTA_AV_MIN_DEBUG_TRACES == TRUE)
+    APPL_TRACE_EVENT2("rc_ctrl handle: %d event=0x%x", handle, event);
+#else
+    APPL_TRACE_EVENT2("bta_av_rc_ctrl_cback handle: %d event=0x%x", handle, event);
+#endif
+    if (event == AVRC_OPEN_IND_EVT)
+    {
+        /* save handle of opened connection
+        bta_av_cb.rc_handle = handle;*/
+
+        msg_event = BTA_AV_AVRC_OPEN_EVT;
+    }
+    else if (event == AVRC_CLOSE_IND_EVT)
+    {
+        msg_event = BTA_AV_AVRC_CLOSE_EVT;
+    }
+
+    if (msg_event)
+    {
+        if ((p_msg = (tBTA_AV_RC_CONN_CHG *) GKI_getbuf(sizeof(tBTA_AV_RC_CONN_CHG))) != NULL)
+        {
+            p_msg->hdr.event = msg_event;
+            p_msg->handle    = handle;
+            if(peer_addr)
+                bdcpy(p_msg->peer_addr, peer_addr);
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_msg_cback
+**
+** Description      AVRCP message callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_rc_msg_cback(UINT8 handle, UINT8 label, UINT8 opcode, tAVRC_MSG *p_msg)
+{
+    tBTA_AV_RC_MSG  *p_buf;
+    UINT8           *p_data = NULL;
+    UINT8           **p_p_data = NULL;
+    UINT16          data_len = 0;
+
+#if (defined(BTA_AV_MIN_DEBUG_TRACES) && BTA_AV_MIN_DEBUG_TRACES == TRUE)
+    APPL_TRACE_ERROR2("rc_msg handle: %d opcode=0x%x", handle, opcode);
+#else
+    APPL_TRACE_EVENT2("bta_av_rc_msg_cback handle: %d opcode=0x%x", handle, opcode);
+#endif
+    /* determine size of buffer we need */
+    if (opcode == AVRC_OP_VENDOR && p_msg->vendor.p_vendor_data != NULL)
+    {
+        p_data = p_msg->vendor.p_vendor_data;
+        p_p_data = &p_msg->vendor.p_vendor_data;
+        data_len = (UINT16) p_msg->vendor.vendor_len;
+    }
+    else if (opcode == AVRC_OP_PASS_THRU && p_msg->pass.p_pass_data != NULL)
+    {
+        p_data = p_msg->pass.p_pass_data;
+        p_p_data = &p_msg->pass.p_pass_data;
+        data_len = (UINT16) p_msg->pass.pass_len;
+    }
+
+    if ((p_buf = (tBTA_AV_RC_MSG *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_RC_MSG) + data_len))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_AVRC_MSG_EVT;
+        p_buf->handle = handle;
+        p_buf->label = label;
+        p_buf->opcode = opcode;
+        memcpy(&p_buf->msg, p_msg, sizeof(tAVRC_MSG));
+        if (p_data != NULL)
+        {
+            memcpy((UINT8 *)(p_buf + 1), p_data, data_len);
+            *p_p_data = (UINT8 *)(p_buf + 1);
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_create
+**
+** Description      alloc RCB and call AVRC_Open
+**
+** Returns          the created rc handle
+**
+*******************************************************************************/
+UINT8 bta_av_rc_create(tBTA_AV_CB *p_cb, UINT8 role, UINT8 shdl, UINT8 lidx)
+{
+    tAVRC_CONN_CB ccb;
+    BD_ADDR_PTR   bda = (BD_ADDR_PTR)bd_addr_any;
+    UINT8         status = BTA_AV_RC_ROLE_ACP;
+    tBTA_AV_SCB  *p_scb = p_cb->p_scb[shdl - 1];
+    int i;
+    UINT8   rc_handle;
+    tBTA_AV_RCB *p_rcb;
+
+    if(role == AVCT_INT)
+    {
+        bda = p_scb->peer_addr;
+        status = BTA_AV_RC_ROLE_INT;
+    }
+    else
+    {
+        if ((p_rcb = bta_av_get_rcb_by_shdl(shdl)) != NULL )
+        {
+            APPL_TRACE_ERROR1("bta_av_rc_create ACP handle exist for shdl:%d", shdl);
+            return p_rcb->handle;
+        }
+    }
+
+    ccb.p_ctrl_cback = bta_av_rc_ctrl_cback;
+    ccb.p_msg_cback = bta_av_rc_msg_cback;
+    ccb.company_id = p_bta_av_cfg->company_id;
+    ccb.conn = role;
+    /* note: BTA_AV_FEAT_RCTG = AVRC_CT_TARGET, BTA_AV_FEAT_RCCT = AVRC_CT_CONTROL */
+    ccb.control = p_cb->features & (BTA_AV_FEAT_RCTG | BTA_AV_FEAT_RCCT | AVRC_CT_PASSIVE);
+
+
+    if (AVRC_Open(&rc_handle, &ccb, bda) != AVRC_SUCCESS)
+        return BTA_AV_RC_HANDLE_NONE;
+
+    i = rc_handle;
+    p_rcb = &p_cb->rcb[i];
+
+    if (p_rcb->handle != BTA_AV_RC_HANDLE_NONE)
+    {
+        APPL_TRACE_ERROR1("bta_av_rc_create found duplicated handle:%d", rc_handle);
+    }
+
+    p_rcb->handle = rc_handle;
+    p_rcb->status = status;
+    p_rcb->shdl = shdl;
+    p_rcb->lidx = lidx;
+    p_rcb->peer_features = 0;
+    if(lidx == (BTA_AV_NUM_LINKS + 1))
+    {
+        /* this LIDX is reserved for the AVRCP ACP connection */
+        p_cb->rc_acp_handle = p_rcb->handle;
+        p_cb->rc_acp_idx = (i + 1);
+        APPL_TRACE_DEBUG2("rc_acp_handle:%d idx:%d", p_cb->rc_acp_handle, p_cb->rc_acp_idx);
+    }
+    APPL_TRACE_DEBUG6("create %d, role: %d, shdl:%d, rc_handle:%d, lidx:%d, status:0x%x",
+        i, role, shdl, p_rcb->handle, lidx, p_rcb->status);
+
+    return rc_handle;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_valid_group_navi_msg
+**
+** Description      Check if it is Group Navigation Msg for Metadata
+**
+** Returns          BTA_AV_RSP_ACCEPT or BTA_AV_RSP_NOT_IMPL.
+**
+*******************************************************************************/
+static tBTA_AV_CODE bta_av_group_navi_supported(UINT8 len, UINT8 *p_data)
+{
+    tBTA_AV_CODE ret=BTA_AV_RSP_NOT_IMPL;
+    UINT8 *p_ptr = p_data;
+    UINT16 u16;
+    UINT32 u32;
+
+    if (p_bta_av_cfg->avrc_group && len == BTA_GROUP_NAVI_MSG_OP_DATA_LEN)
+    {
+        BTA_AV_BE_STREAM_TO_CO_ID(u32, p_ptr);
+        BE_STREAM_TO_UINT16(u16, p_ptr);
+
+        if (u32 == AVRC_CO_METADATA)
+        {
+            if (u16 <= AVRC_PDU_PREV_GROUP)
+                ret = BTA_AV_RSP_ACCEPT;
+            else
+                ret = BTA_AV_RSP_REJ;
+        }
+    }
+
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_op_supported
+**
+** Description      Check if remote control operation is supported.
+**
+** Returns          BTA_AV_RSP_ACCEPT of supported, BTA_AV_RSP_NOT_IMPL if not.
+**
+*******************************************************************************/
+static tBTA_AV_CODE bta_av_op_supported(tBTA_AV_RC rc_id)
+{
+    tBTA_AV_CODE ret_code = BTA_AV_RSP_NOT_IMPL;
+
+    if (p_bta_av_rc_id)
+    {
+        if (p_bta_av_rc_id[rc_id >> 4] & (1 << (rc_id & 0x0F)))
+        {
+            ret_code = BTA_AV_RSP_ACCEPT;
+        }
+        else if ((p_bta_av_cfg->rc_pass_rsp == BTA_AV_RSP_INTERIM) && p_bta_av_rc_id_ac)
+        {
+            if (p_bta_av_rc_id_ac[rc_id >> 4] & (1 << (rc_id & 0x0F)))
+            {
+                ret_code = BTA_AV_RSP_INTERIM;
+            }
+        }
+    }
+    return ret_code;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_find_lcb
+**
+** Description      Given BD_addr, find the associated LCB.
+**
+** Returns          NULL, if not found.
+**
+*******************************************************************************/
+tBTA_AV_LCB * bta_av_find_lcb(BD_ADDR addr, UINT8 op)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    int     xx;
+    UINT8   mask;
+    tBTA_AV_LCB *p_lcb = NULL;
+
+    for(xx=0; xx<BTA_AV_NUM_LINKS; xx++)
+    {
+        mask = 1 << xx; /* the used mask for this lcb */
+        if((mask & p_cb->conn_lcb) && 0 ==( bdcmp(p_cb->lcb[xx].addr, addr)))
+        {
+            p_lcb = &p_cb->lcb[xx];
+            if(op == BTA_AV_LCB_FREE)
+            {
+                p_cb->conn_lcb &= ~mask; /* clear the connect mask */
+                APPL_TRACE_DEBUG1("conn_lcb: 0x%x", p_cb->conn_lcb);
+            }
+            break;
+        }
+    }
+    return p_lcb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_opened
+**
+** Description      Set AVRCP state to opened.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_opened(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RC_OPEN rc_open;
+    tBTA_AV_SCB     *p_scb;
+    int         i;
+    UINT8       shdl = 0;
+    tBTA_AV_LCB *p_lcb;
+    tBTA_AV_RCB *p_rcb;
+    UINT8       tmp;
+    UINT8       disc = 0;
+
+    /* find the SCB & stop the timer */
+    for(i=0; i<BTA_AV_NUM_STRS; i++)
+    {
+        p_scb = p_cb->p_scb[i];
+        if(p_scb && bdcmp(p_scb->peer_addr, p_data->rc_conn_chg.peer_addr) == 0)
+        {
+            p_scb->rc_handle = p_data->rc_conn_chg.handle;
+            APPL_TRACE_DEBUG2("bta_av_rc_opened shdl:%d, srch %d", i + 1, p_scb->rc_handle);
+            shdl = i+1;
+            APPL_TRACE_ERROR1("use_rc:%d", p_scb->use_rc);
+            bta_sys_stop_timer(&p_scb->timer);
+            disc = p_scb->hndl;
+            break;
+        }
+    }
+
+    i = p_data->rc_conn_chg.handle;
+    if (p_cb->rcb[i].handle == BTA_AV_RC_HANDLE_NONE)
+    {
+        APPL_TRACE_ERROR1("not a valid handle:%d any more", i);
+        return;
+    }
+
+
+    if (p_cb->rcb[i].lidx == (BTA_AV_NUM_LINKS + 1) && shdl != 0)
+    {
+        /* rc is opened on the RC only ACP channel, but is for a specific
+         * SCB -> need to switch RCBs */
+        p_rcb = bta_av_get_rcb_by_shdl(shdl);
+        if (p_rcb)
+        {
+            p_rcb->shdl = p_cb->rcb[i].shdl;
+            tmp         = p_rcb->lidx;
+            p_rcb->lidx = p_cb->rcb[i].lidx;
+            p_cb->rcb[i].lidx = tmp;
+            p_cb->rc_acp_handle = p_rcb->handle;
+            p_cb->rc_acp_idx = (p_rcb - p_cb->rcb) + 1;
+            APPL_TRACE_DEBUG2("switching RCB rc_acp_handle:%d idx:%d",
+                               p_cb->rc_acp_handle, p_cb->rc_acp_idx);
+        }
+    }
+
+    p_cb->rcb[i].shdl = shdl;
+    rc_open.rc_handle = i;
+    APPL_TRACE_ERROR4("bta_av_rc_opened rcb[%d] shdl:%d lidx:%d/%d",
+            i, shdl, p_cb->rcb[i].lidx, p_cb->lcb[BTA_AV_NUM_LINKS].lidx);
+    p_cb->rcb[i].status |= BTA_AV_RC_CONN_MASK;
+
+    if(!shdl && 0 == p_cb->lcb[BTA_AV_NUM_LINKS].lidx)
+    {
+        /* no associated SCB -> connected to an RC only device
+         * update the index to the extra LCB */
+        p_lcb = &p_cb->lcb[BTA_AV_NUM_LINKS];
+        bdcpy(p_lcb->addr, p_data->rc_conn_chg.peer_addr);
+        APPL_TRACE_DEBUG6("rc_only bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                      p_lcb->addr[0], p_lcb->addr[1],
+                      p_lcb->addr[2], p_lcb->addr[3],
+                      p_lcb->addr[4], p_lcb->addr[5]);
+        p_lcb->lidx = BTA_AV_NUM_LINKS + 1;
+            p_cb->rcb[i].lidx = p_lcb->lidx;
+        p_lcb->conn_msk = 1;
+        APPL_TRACE_ERROR3("rcb[%d].lidx=%d, lcb.conn_msk=x%x",
+            i, p_cb->rcb[i].lidx, p_lcb->conn_msk);
+        disc = p_data->rc_conn_chg.handle|BTA_AV_CHNL_MSK;
+    }
+
+    bdcpy(rc_open.peer_addr, p_data->rc_conn_chg.peer_addr);
+    rc_open.peer_features = p_cb->rcb[i].peer_features;
+    rc_open.status = BTA_AV_SUCCESS;
+    APPL_TRACE_DEBUG2("local features:x%x peer_features:x%x", p_cb->features,
+                      rc_open.peer_features);
+    if(rc_open.peer_features == 0)
+    {
+        /* we have not done SDP on peer RC capabilities.
+         * peer must have initiated the RC connection */
+        rc_open.peer_features = BTA_AV_FEAT_RCCT;
+        bta_av_rc_disc(disc);
+    }
+    (*p_cb->p_cback)(BTA_AV_RC_OPEN_EVT, (tBTA_AV *) &rc_open);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_remote_cmd
+**
+** Description      Send an AVRCP remote control command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_remote_cmd(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RCB    *p_rcb;
+    if (p_cb->features & BTA_AV_FEAT_RCCT)
+    {
+        if(p_data->hdr.layer_specific < BTA_AV_NUM_RCB)
+        {
+            p_rcb = &p_cb->rcb[p_data->hdr.layer_specific];
+            if(p_rcb->status & BTA_AV_RC_CONN_MASK)
+            {
+                AVRC_PassCmd(p_rcb->handle, p_data->api_remote_cmd.label,
+                     &p_data->api_remote_cmd.msg);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_vendor_cmd
+**
+** Description      Send an AVRCP vendor specific command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_vendor_cmd(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RCB    *p_rcb;
+    if ( (p_cb->features & (BTA_AV_FEAT_RCCT | BTA_AV_FEAT_VENDOR)) ==
+         (BTA_AV_FEAT_RCCT | BTA_AV_FEAT_VENDOR))
+    {
+        if(p_data->hdr.layer_specific < BTA_AV_NUM_RCB)
+        {
+            p_rcb = &p_cb->rcb[p_data->hdr.layer_specific];
+            AVRC_VendorCmd(p_rcb->handle, p_data->api_vendor.label, &p_data->api_vendor.msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_vendor_rsp
+**
+** Description      Send an AVRCP vendor specific response.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_vendor_rsp(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RCB    *p_rcb;
+    if ( (p_cb->features & (BTA_AV_FEAT_RCTG | BTA_AV_FEAT_VENDOR)) ==
+         (BTA_AV_FEAT_RCTG | BTA_AV_FEAT_VENDOR))
+    {
+        if(p_data->hdr.layer_specific < BTA_AV_NUM_RCB)
+        {
+            p_rcb = &p_cb->rcb[p_data->hdr.layer_specific];
+            AVRC_VendorRsp(p_rcb->handle, p_data->api_vendor.label, &p_data->api_vendor.msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_meta_rsp
+**
+** Description      Send an AVRCP metadata/advanced control command/response.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_meta_rsp(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_RCB *p_rcb;
+    BOOLEAN         free = TRUE;
+
+    if ((p_cb->features & BTA_AV_FEAT_METADATA) && (p_data->hdr.layer_specific < BTA_AV_NUM_RCB))
+    {
+        if ((p_data->api_meta_rsp.is_rsp && (p_cb->features & BTA_AV_FEAT_RCTG)) ||
+            (!p_data->api_meta_rsp.is_rsp && (p_cb->features & BTA_AV_FEAT_RCCT)) )
+        {
+            p_rcb = &p_cb->rcb[p_data->hdr.layer_specific];
+            AVRC_MsgReq(p_rcb->handle, p_data->api_meta_rsp.label, p_data->api_meta_rsp.rsp_code,
+                                      p_data->api_meta_rsp.p_pkt);
+            free = FALSE;
+        }
+    }
+
+    if (free)
+        GKI_freebuf (p_data->api_meta_rsp.p_pkt);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_free_rsp
+**
+** Description      free an AVRCP metadata command buffer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_free_rsp (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    GKI_freebuf (p_data->api_meta_rsp.p_pkt);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_meta_req
+**
+** Description      Send an AVRCP metadata command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_free_msg (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_av_chk_notif_evt_id
+**
+** Description      make sure the requested player id is valid.
+**
+** Returns          BTA_AV_STS_NO_RSP, if no error
+**
+*******************************************************************************/
+static tAVRC_STS bta_av_chk_notif_evt_id(tAVRC_MSG_VENDOR *p_vendor)
+{
+    tAVRC_STS   status = BTA_AV_STS_NO_RSP;
+    UINT8       xx;
+    UINT16      u16;
+    UINT8       *p = p_vendor->p_vendor_data + 2;
+
+    BE_STREAM_TO_UINT16 (u16, p);
+    /* double check the fixed length */
+    if ((u16 != 5) || (p_vendor->vendor_len != 9))
+    {
+        status = AVRC_STS_INTERNAL_ERR;
+    }
+    else
+    {
+        /* make sure the player_id is valid */
+        for (xx=0; xx<p_bta_av_cfg->num_evt_ids; xx++)
+        {
+            if (*p == p_bta_av_cfg->p_meta_evt_ids[xx])
+            {
+                break;
+            }
+        }
+        if (xx == p_bta_av_cfg->num_evt_ids)
+        {
+            status = AVRC_STS_BAD_PARAM;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_proc_meta_cmd
+**
+** Description      Process an AVRCP metadata command from the peer.
+**
+** Returns          TRUE to respond immediately
+**
+*******************************************************************************/
+tBTA_AV_EVT bta_av_proc_meta_cmd(tAVRC_RESPONSE  *p_rc_rsp, tBTA_AV_RC_MSG *p_msg, UINT8 *p_ctype)
+{
+    tBTA_AV_EVT evt = BTA_AV_META_MSG_EVT;
+    UINT8       u8, pdu, *p;
+    UINT16      u16;
+    tAVRC_MSG_VENDOR    *p_vendor = &p_msg->msg.vendor;
+
+    pdu = *(p_vendor->p_vendor_data);
+    p_rc_rsp->pdu = pdu;
+    *p_ctype = AVRC_RSP_REJ;
+    /* Metadata messages only use PANEL sub-unit type */
+    if (p_vendor->hdr.subunit_type != AVRC_SUB_PANEL)
+    {
+        APPL_TRACE_DEBUG0("SUBUNIT must be PANEL");
+        /* reject it */
+        evt=0;
+        p_vendor->hdr.ctype = BTA_AV_RSP_NOT_IMPL;
+        AVRC_VendorRsp(p_msg->handle, p_msg->label, &p_msg->msg.vendor);
+    }
+    else
+    {
+        switch (pdu)
+        {
+        case AVRC_PDU_GET_CAPABILITIES:
+            /* process GetCapabilities command without reporting the event to app */
+            evt = 0;
+            u8 = *(p_vendor->p_vendor_data + 4);
+            p = p_vendor->p_vendor_data + 2;
+            p_rc_rsp->get_caps.capability_id = u8;
+            BE_STREAM_TO_UINT16 (u16, p);
+            if ((u16 != 1) || (p_vendor->vendor_len != 5))
+            {
+                p_rc_rsp->get_caps.status = AVRC_STS_INTERNAL_ERR;
+            }
+            else
+            {
+                p_rc_rsp->get_caps.status = AVRC_STS_NO_ERROR;
+                if (u8 == AVRC_CAP_COMPANY_ID)
+                {
+                    *p_ctype = AVRC_RSP_IMPL_STBL;
+                    p_rc_rsp->get_caps.count = p_bta_av_cfg->num_co_ids;
+                    memcpy(p_rc_rsp->get_caps.param.company_id, p_bta_av_cfg->p_meta_co_ids,
+                           (p_bta_av_cfg->num_co_ids << 2));
+                }
+                else if (u8 == AVRC_CAP_EVENTS_SUPPORTED)
+                {
+                    *p_ctype = AVRC_RSP_IMPL_STBL;
+                    p_rc_rsp->get_caps.count = p_bta_av_cfg->num_evt_ids;
+                    memcpy(p_rc_rsp->get_caps.param.event_id, p_bta_av_cfg->p_meta_evt_ids,
+                           p_bta_av_cfg->num_evt_ids);
+                }
+                else
+                {
+                    APPL_TRACE_DEBUG1("Invalid capability ID: 0x%x", u8);
+                    /* reject - unknown capability ID */
+                    p_rc_rsp->get_caps.status = AVRC_STS_BAD_PARAM;
+                }
+            }
+            break;
+
+
+        case AVRC_PDU_REGISTER_NOTIFICATION:
+            /* make sure the event_id is implemented */
+            p_rc_rsp->rsp.status = bta_av_chk_notif_evt_id (p_vendor);
+            if (p_rc_rsp->rsp.status != BTA_AV_STS_NO_RSP)
+                evt = 0;
+            break;
+
+        }
+    }
+
+    return evt;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_msg
+**
+** Description      Process an AVRCP message from the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_msg(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_EVT evt = 0;
+    tBTA_AV     av;
+    BT_HDR      *p_pkt = NULL;
+    tAVRC_MSG_VENDOR    *p_vendor = &p_data->rc_msg.msg.vendor;
+
+    if (p_data->rc_msg.opcode == AVRC_OP_PASS_THRU)
+    {
+    /* if this is a pass thru command */
+        if (p_data->rc_msg.msg.hdr.ctype == AVRC_CMD_CTRL)
+        {
+        /* check if operation is supported */
+            if (p_data->rc_msg.msg.pass.op_id == AVRC_ID_VENDOR)
+            {
+                p_data->rc_msg.msg.hdr.ctype = BTA_AV_RSP_NOT_IMPL;
+            }
+            else
+            {
+                p_data->rc_msg.msg.hdr.ctype = bta_av_op_supported(p_data->rc_msg.msg.pass.op_id);
+            }
+
+            /* send response */
+            if (p_data->rc_msg.msg.hdr.ctype != BTA_AV_RSP_INTERIM)
+                AVRC_PassRsp(p_data->rc_msg.handle, p_data->rc_msg.label, &p_data->rc_msg.msg.pass);
+
+            /* set up for callback if supported */
+            if (p_data->rc_msg.msg.hdr.ctype == BTA_AV_RSP_ACCEPT || p_data->rc_msg.msg.hdr.ctype == BTA_AV_RSP_INTERIM)
+            {
+                evt = BTA_AV_REMOTE_CMD_EVT;
+                av.remote_cmd.rc_id = p_data->rc_msg.msg.pass.op_id;
+                av.remote_cmd.key_state = p_data->rc_msg.msg.pass.state;
+                av.remote_cmd.p_data = p_data->rc_msg.msg.pass.p_pass_data;
+                av.remote_cmd.len = p_data->rc_msg.msg.pass.pass_len;
+                memcpy(&av.remote_cmd.hdr, &p_data->rc_msg.msg.hdr, sizeof (tAVRC_HDR));
+                av.remote_cmd.label = p_data->rc_msg.label;
+            }
+        }
+        /* else if this is a pass thru response */
+        else if (p_data->rc_msg.msg.hdr.ctype >= AVRC_RSP_ACCEPT)
+        {
+            /* set up for callback */
+            evt = BTA_AV_REMOTE_RSP_EVT;
+            av.remote_rsp.rc_id = p_data->rc_msg.msg.pass.op_id;
+            av.remote_rsp.key_state = p_data->rc_msg.msg.pass.state;
+            av.remote_rsp.rsp_code = p_data->rc_msg.msg.hdr.ctype;
+            av.remote_rsp.label = p_data->rc_msg.label;
+        }
+        /* must be a bad ctype -> reject*/
+        else
+        {
+            p_data->rc_msg.msg.hdr.ctype = BTA_AV_RSP_REJ;
+            AVRC_PassRsp(p_data->rc_msg.handle, p_data->rc_msg.label, &p_data->rc_msg.msg.pass);
+        }
+    }
+    /* else if this is a vendor specific command or response */
+    else if (p_data->rc_msg.opcode == AVRC_OP_VENDOR)
+    {
+        /* set up for callback */
+        av.vendor_cmd.code = p_data->rc_msg.msg.hdr.ctype;
+        av.vendor_cmd.company_id = p_vendor->company_id;
+        av.vendor_cmd.label = p_data->rc_msg.label;
+        av.vendor_cmd.p_data = p_vendor->p_vendor_data;
+        av.vendor_cmd.len = p_vendor->vendor_len;
+
+        /* if configured to support vendor specific and it's a command */
+        if ((p_cb->features & BTA_AV_FEAT_VENDOR)  &&
+            p_data->rc_msg.msg.hdr.ctype <= AVRC_CMD_GEN_INQ)
+        {
+                evt = BTA_AV_VENDOR_CMD_EVT;
+        }
+        /* else if configured to support vendor specific and it's a response */
+        else if ((p_cb->features & BTA_AV_FEAT_VENDOR) &&
+                 p_data->rc_msg.msg.hdr.ctype >= AVRC_RSP_ACCEPT)
+        {
+                evt = BTA_AV_VENDOR_RSP_EVT;
+
+        }
+        /* else if not configured to support vendor specific and it's a command */
+        else if (!(p_cb->features & BTA_AV_FEAT_VENDOR)  &&
+            p_data->rc_msg.msg.hdr.ctype <= AVRC_CMD_GEN_INQ)
+        {
+           if(p_data->rc_msg.msg.vendor.p_vendor_data[0] == AVRC_PDU_INVALID)
+           {
+           /* reject it */
+              p_data->rc_msg.msg.hdr.ctype = BTA_AV_RSP_REJ;
+              p_data->rc_msg.msg.vendor.p_vendor_data[4] = AVRC_STS_BAD_CMD;
+           }
+           else
+              p_data->rc_msg.msg.hdr.ctype = BTA_AV_RSP_NOT_IMPL;
+           AVRC_VendorRsp(p_data->rc_msg.handle, p_data->rc_msg.label, &p_data->rc_msg.msg.vendor);
+        }
+    }
+
+    /* call callback */
+    if (evt != 0)
+    {
+        av.remote_cmd.rc_handle = p_data->rc_msg.handle;
+        (*p_cb->p_cback)(evt, &av);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_close
+**
+** Description      close the specified AVRC handle.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_close (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    UINT16 handle = p_data->hdr.layer_specific;
+    tBTA_AV_SCB  *p_scb;
+    tBTA_AV_RCB *p_rcb;
+
+    if(handle < BTA_AV_NUM_RCB)
+    {
+        p_rcb = &p_cb->rcb[handle];
+
+        APPL_TRACE_DEBUG2("bta_av_rc_close handle: %d, status=0x%x", p_rcb->handle, p_rcb->status);
+        if(p_rcb->handle != BTA_AV_RC_HANDLE_NONE)
+        {
+            if(p_rcb->shdl)
+            {
+                p_scb = bta_av_cb.p_scb[p_rcb->shdl - 1];
+                if(p_scb)
+                {
+                    /* just in case the RC timer is active
+                    if(bta_av_cb.features & BTA_AV_FEAT_RCCT &&
+                       p_scb->chnl == BTA_AV_CHNL_AUDIO) */
+                        bta_sys_stop_timer(&p_scb->timer);
+                }
+            }
+
+            AVRC_Close(p_rcb->handle);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_get_shdl
+**
+** Returns          The index to p_scb[]
+**
+*******************************************************************************/
+static UINT8 bta_av_get_shdl(tBTA_AV_SCB *p_scb)
+{
+    int     i;
+    UINT8   shdl = 0;
+    /* find the SCB & stop the timer */
+    for(i=0; i<BTA_AV_NUM_STRS; i++)
+    {
+        if(p_scb == bta_av_cb.p_scb[i])
+        {
+            shdl = i+1;
+            break;
+        }
+    }
+    return shdl;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_stream_chg
+**
+** Description      audio streaming status changed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_stream_chg(tBTA_AV_SCB *p_scb, BOOLEAN started)
+{
+    UINT8   started_msk;
+    int     i;
+    UINT8   *p_streams;
+    BOOLEAN no_streams = FALSE;
+    tBTA_AV_SCB *p_scbi;
+
+    started_msk = BTA_AV_HNDL_TO_MSK(p_scb->hdi);
+    APPL_TRACE_DEBUG3 ("bta_av_stream_chg started:%d started_msk:x%x chnl:x%x", started,
+                                                  started_msk, p_scb->chnl);
+    if (BTA_AV_CHNL_AUDIO == p_scb->chnl)
+        p_streams = &bta_av_cb.audio_streams;
+    else
+        p_streams = &bta_av_cb.video_streams;
+
+    if (started)
+    {
+        /* Let L2CAP know this channel is processed with high priority */
+        L2CA_SetAclPriority(p_scb->peer_addr, L2CAP_PRIORITY_HIGH);
+        (*p_streams) |= started_msk;
+    }
+    else
+    {
+        (*p_streams) &= ~started_msk;
+    }
+
+    if (!started)
+    {
+        i=0;
+        if (BTA_AV_CHNL_AUDIO == p_scb->chnl)
+        {
+            if (bta_av_cb.video_streams == 0)
+                no_streams = TRUE;
+        }
+        else
+        {
+            no_streams = TRUE;
+            if ( bta_av_cb.audio_streams )
+            {
+                for (; i<BTA_AV_NUM_STRS; i++)
+                {
+                    p_scbi = bta_av_cb.p_scb[i];
+                    /* scb is used and started */
+                    if ( p_scbi && (bta_av_cb.audio_streams & BTA_AV_HNDL_TO_MSK(i))
+                        && bdcmp(p_scbi->peer_addr, p_scb->peer_addr) == 0)
+                    {
+                        no_streams = FALSE;
+                        break;
+                    }
+                }
+
+            }
+        }
+
+        APPL_TRACE_DEBUG4 ("no_streams:%d i:%d, audio_streams:x%x, video_streams:x%x", no_streams, i,
+                           bta_av_cb.audio_streams, bta_av_cb.video_streams);
+        if (no_streams)
+        {
+            /* Let L2CAP know this channel is processed with low priority */
+            L2CA_SetAclPriority(p_scb->peer_addr, L2CAP_PRIORITY_NORMAL);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_av_conn_chg
+**
+** Description      connetion status changed.
+**                  Open an AVRCP acceptor channel, if new conn.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_conn_chg(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tBTA_AV_SCB     *p_scb;
+    tBTA_AV_SCB     *p_scbi;
+    UINT8   mask;
+    UINT8   conn_msk;
+    UINT8   old_msk;
+    int i;
+    int index = (p_data->hdr.layer_specific & BTA_AV_HNDL_MSK) - 1;
+    tBTA_AV_LCB *p_lcb;
+    tBTA_AV_LCB *p_lcb_rc;
+    tBTA_AV_RCB *p_rcb, *p_rcb2;
+    BOOLEAN     chk_restore = FALSE;
+
+    p_scb = p_cb->p_scb[index];
+
+    mask = BTA_AV_HNDL_TO_MSK(index);
+    p_lcb = bta_av_find_lcb(p_data->conn_chg.peer_addr, BTA_AV_LCB_FIND);
+    conn_msk = 1 << (index + 1);
+    if(p_data->conn_chg.is_up)
+    {
+        /* set the conned mask for this channel */
+        if(p_scb)
+        {
+            if(p_lcb)
+            {
+                p_lcb->conn_msk |= conn_msk;
+                for (i=0; i<BTA_AV_NUM_RCB; i++)
+                {
+                    if (bta_av_cb.rcb[i].lidx == p_lcb->lidx)
+                    {
+                        bta_av_cb.rcb[i].shdl = index + 1;
+                        APPL_TRACE_DEBUG5("conn_chg up[%d]: %d, status=0x%x, shdl:%d, lidx:%d", i,
+                                          bta_av_cb.rcb[i].handle, bta_av_cb.rcb[i].status,
+                                          bta_av_cb.rcb[i].shdl, bta_av_cb.rcb[i].lidx);
+                        break;
+                    }
+                }
+            }
+            if (p_scb->chnl == BTA_AV_CHNL_AUDIO)
+            {
+                old_msk = p_cb->conn_audio;
+                p_cb->conn_audio |= mask;
+            }
+            else
+            {
+                old_msk = p_cb->conn_video;
+                p_cb->conn_video |= mask;
+            }
+
+            if ((old_msk & mask) == 0)
+            {
+                /* increase the audio open count, if not set yet */
+                bta_av_cb.audio_open_cnt++;
+            }
+
+
+            APPL_TRACE_DEBUG2("rc_acp_handle:%d rc_acp_idx:%d", p_cb->rc_acp_handle, p_cb->rc_acp_idx);
+            /* check if the AVRCP ACP channel is already connected */
+            if(p_lcb && p_cb->rc_acp_handle != BTA_AV_RC_HANDLE_NONE && p_cb->rc_acp_idx)
+            {
+                p_lcb_rc = &p_cb->lcb[BTA_AV_NUM_LINKS];
+                APPL_TRACE_DEBUG1("rc_acp is connected && conn_chg on same addr p_lcb_rc->conn_msk:x%x",
+                                  p_lcb_rc->conn_msk);
+                /* check if the RC is connected to the scb addr */
+                APPL_TRACE_DEBUG6 ("p_lcb_rc->addr: %02x:%02x:%02x:%02x:%02x:%02x",
+                       p_lcb_rc->addr[0], p_lcb_rc->addr[1], p_lcb_rc->addr[2], p_lcb_rc->addr[3],
+                       p_lcb_rc->addr[4], p_lcb_rc->addr[5]);
+                APPL_TRACE_DEBUG6 ("conn_chg.peer_addr: %02x:%02x:%02x:%02x:%02x:%02x",
+                       p_data->conn_chg.peer_addr[0], p_data->conn_chg.peer_addr[1],
+                       p_data->conn_chg.peer_addr[2],
+                       p_data->conn_chg.peer_addr[3], p_data->conn_chg.peer_addr[4],
+                       p_data->conn_chg.peer_addr[5]);
+                if (p_lcb_rc->conn_msk && bdcmp(p_lcb_rc->addr, p_data->conn_chg.peer_addr) == 0)
+                {
+                    /* AVRCP is already connected.
+                     * need to update the association betwen SCB and RCB */
+                    p_lcb_rc->conn_msk = 0; /* indicate RC ONLY is not connected */
+                    p_lcb_rc->lidx = 0;
+                    p_scb->rc_handle = p_cb->rc_acp_handle;
+                    p_rcb = &p_cb->rcb[p_cb->rc_acp_idx - 1];
+                    p_rcb->shdl = bta_av_get_shdl(p_scb);
+                    APPL_TRACE_DEBUG3("update rc_acp shdl:%d/%d srch:%d", index + 1, p_rcb->shdl,
+                                      p_scb->rc_handle );
+
+                    p_rcb2 = bta_av_get_rcb_by_shdl(p_rcb->shdl);
+                    if (p_rcb2)
+                    {
+                        /* found the RCB that was created to associated with this SCB */
+                        p_cb->rc_acp_handle = p_rcb2->handle;
+                        p_cb->rc_acp_idx = (p_rcb2 - p_cb->rcb) + 1;
+                        APPL_TRACE_DEBUG2("new rc_acp_handle:%d, idx:%d", p_cb->rc_acp_handle,
+                                           p_cb->rc_acp_idx);
+                        p_rcb2->lidx = (BTA_AV_NUM_LINKS + 1);
+                        APPL_TRACE_DEBUG3("rc2 handle:%d lidx:%d/%d",p_rcb2->handle, p_rcb2->lidx,
+                                          p_cb->lcb[p_rcb2->lidx-1].lidx);
+                    }
+                    p_rcb->lidx = p_lcb->lidx;
+                    APPL_TRACE_DEBUG3("rc handle:%d lidx:%d/%d",p_rcb->handle, p_rcb->lidx,
+                                      p_cb->lcb[p_rcb->lidx-1].lidx);
+                }
+            }
+        }
+    }
+    else
+    {
+        if ((p_cb->conn_audio & mask) && bta_av_cb.audio_open_cnt)
+        {
+            /* this channel is still marked as open. decrease the count */
+            bta_av_cb.audio_open_cnt--;
+        }
+
+        /* clear the conned mask for this channel */
+        p_cb->conn_audio &= ~mask;
+        p_cb->conn_video &= ~mask;
+        if(p_scb)
+        {
+            /* the stream is closed.
+             * clear the peer address, so it would not mess up the AVRCP for the next round of operation */
+            bdcpy(p_scb->peer_addr, bd_addr_null);
+            if(p_scb->chnl == BTA_AV_CHNL_AUDIO)
+            {
+                if(p_lcb)
+                {
+                    p_lcb->conn_msk &= ~conn_msk;
+                }
+                /* audio channel is down. make sure the INT channel is down */
+                /* just in case the RC timer is active
+                if(p_cb->features & BTA_AV_FEAT_RCCT) */
+                {
+                    bta_sys_stop_timer(&p_scb->timer);
+                }
+                /* one audio channel goes down. check if we need to restore high priority */
+                chk_restore = TRUE;
+            }
+        }
+
+        APPL_TRACE_DEBUG1("bta_av_conn_chg shdl:%d", index + 1);
+        for (i=0; i<BTA_AV_NUM_RCB; i++)
+        {
+            APPL_TRACE_DEBUG5("conn_chg dn[%d]: %d, status=0x%x, shdl:%d, lidx:%d", i,
+                              bta_av_cb.rcb[i].handle, bta_av_cb.rcb[i].status,
+                              bta_av_cb.rcb[i].shdl, bta_av_cb.rcb[i].lidx);
+            if(bta_av_cb.rcb[i].shdl == index + 1)
+            {
+                bta_av_del_rc(&bta_av_cb.rcb[i]);
+                break;
+            }
+        }
+
+        if(p_cb->conn_audio == 0 && p_cb->conn_video == 0)
+        {
+            /* if both channels are not connected,
+             * close all RC channels */
+            bta_av_close_all_rc(p_cb);
+        }
+
+        /* if the AVRCP is no longer listening, create the listening channel */
+        if (bta_av_cb.rc_acp_handle == BTA_AV_RC_HANDLE_NONE && bta_av_cb.features & BTA_AV_FEAT_RCTG)
+            bta_av_rc_create(&bta_av_cb, AVCT_ACP, 0, BTA_AV_NUM_LINKS + 1);
+    }
+
+    APPL_TRACE_DEBUG6("bta_av_conn_chg audio:%x video:%x up:%d conn_msk:0x%x chk_restore:%d audio_open_cnt:%d",
+        p_cb->conn_audio, p_cb->conn_video, p_data->conn_chg.is_up, conn_msk, chk_restore, p_cb->audio_open_cnt);
+
+    if (chk_restore)
+    {
+        if (p_cb->audio_open_cnt == 1)
+        {
+            /* one audio channel goes down and there's one audio channel remains open.
+             * restore the switch role in default link policy */
+            bta_sys_set_default_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH);
+            /* allow role switch, if this is the last connection */
+            bta_av_restore_switch();
+        }
+        if (p_cb->audio_open_cnt)
+        {
+            /* adjust flush timeout settings to longer period */
+            for (i=0; i<BTA_AV_NUM_STRS; i++)
+            {
+                p_scbi = bta_av_cb.p_scb[i];
+                if (p_scbi && p_scbi->chnl == BTA_AV_CHNL_AUDIO && p_scbi->co_started)
+                {
+                    /* may need to update the flush timeout of this already started stream */
+                    if (p_scbi->co_started != bta_av_cb.audio_open_cnt)
+                    {
+                        p_scbi->co_started = bta_av_cb.audio_open_cnt;
+                        L2CA_SetFlushTimeout(p_scbi->peer_addr, p_bta_av_cfg->p_audio_flush_to[p_scbi->co_started - 1] );
+                    }
+                }
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_disable
+**
+** Description      disable AV.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_disable(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data)
+{
+    BT_HDR  hdr;
+    UINT16  xx;
+
+    p_cb->disabling = TRUE;
+
+    bta_av_close_all_rc(p_cb);
+
+    utl_freebuf((void **) &p_cb->p_disc_db);
+
+    /* disable audio/video - de-register all channels,
+     * expect BTA_AV_DEREG_COMP_EVT when deregister is complete */
+    for(xx=0; xx<BTA_AV_NUM_STRS; xx++)
+    {
+        hdr.layer_specific = xx + 1;
+        bta_av_api_deregister((tBTA_AV_DATA *)&hdr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_api_disconnect
+**
+** Description      .
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_api_disconnect(tBTA_AV_DATA *p_data)
+{
+    AVDT_DisconnectReq(p_data->api_discnt.bd_addr, bta_av_conn_cback);
+    bta_sys_stop_timer(&bta_av_cb.sig_tmr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sig_chg
+**
+** Description      process AVDT signal channel up/down.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_sig_chg(tBTA_AV_DATA *p_data)
+{
+    UINT16 event = p_data->str_msg.hdr.layer_specific;
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    int     xx;
+    UINT8   mask;
+    tBTA_AV_LCB *p_lcb = NULL;
+
+    APPL_TRACE_DEBUG1("bta_av_sig_chg event: %d", event);
+    if(event == AVDT_CONNECT_IND_EVT)
+    {
+        p_lcb = bta_av_find_lcb(p_data->str_msg.bd_addr, BTA_AV_LCB_FIND);
+        if(!p_lcb)
+        {
+            /* if the address does not have an LCB yet, alloc one */
+            for(xx=0; xx<BTA_AV_NUM_LINKS; xx++)
+            {
+                mask = 1 << xx;
+                APPL_TRACE_DEBUG1("conn_lcb: 0x%x", p_cb->conn_lcb);
+                if(!(mask & p_cb->conn_lcb))
+                {
+                    if (!p_cb->p_scb[xx])
+                    {
+                        /* We do not have scb for this avdt connection.     */
+                        /* Silently close the connection.                   */
+                        APPL_TRACE_ERROR0("av scb not available for avdt connection");
+                        AVDT_DisconnectReq (p_data->str_msg.bd_addr, NULL);
+                        return;
+                    }
+
+                    p_lcb = &p_cb->lcb[xx];
+                    p_lcb->lidx = xx + 1;
+                    bdcpy(p_lcb->addr, p_data->str_msg.bd_addr);
+                    p_lcb->conn_msk = 0; /* clear the connect mask */
+                    /* start listening when the signal channel is open */
+                    if (p_cb->features & BTA_AV_FEAT_RCTG)
+                    {
+                        bta_av_rc_create(p_cb, AVCT_ACP, 0, p_lcb->lidx);
+                    }
+                    /* this entry is not used yet. */
+                    p_cb->conn_lcb |= mask;     /* mark it as used */
+                    APPL_TRACE_DEBUG1("start sig timer %d", p_data->hdr.offset);
+                    if (p_data->hdr.offset == AVDT_ACP)
+                    {
+                        APPL_TRACE_DEBUG1("Incoming L2CAP acquired, set state as incoming", NULL);
+                        bdcpy(p_cb->p_scb[xx]->peer_addr, p_data->str_msg.bd_addr);
+                        p_cb->p_scb[xx]->use_rc = TRUE;     /* allowing RC for incoming connection */
+                        bta_av_ssm_execute(p_cb->p_scb[xx], BTA_AV_ACP_CONNECT_EVT, p_data);
+
+                        /* The Pending Event should be sent as soon as the L2CAP signalling channel
+                         * is set up, which is NOW. Earlier this was done only after
+                         * BTA_AV_SIG_TIME_VAL milliseconds.
+                         * The following function shall send the event and start the recurring timer
+                         */
+                        bta_av_sig_timer(NULL);
+
+                        /* Possible collision : need to avoid outgoing processing while the timer is running */
+                        p_cb->p_scb[xx]->coll_mask = BTA_AV_COLL_INC_TMR;
+
+                        p_cb->acp_sig_tmr.param = (UINT32)xx;
+                        p_cb->acp_sig_tmr.p_cback = (TIMER_CBACK*)&bta_av_acp_sig_timer_cback;
+                        bta_sys_start_timer(&p_cb->acp_sig_tmr, 0, BTA_AV_ACP_SIG_TIME_VAL);
+                    }
+                    break;
+                }
+            }
+        }
+    }
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+    else if (event == BTA_AR_AVDT_CONN_EVT)
+    {
+        bta_sys_stop_timer(&bta_av_cb.sig_tmr);
+    }
+#endif
+    else
+    {
+        /* disconnected. */
+        p_lcb = bta_av_find_lcb(p_data->str_msg.bd_addr, BTA_AV_LCB_FREE);
+        if(p_lcb && p_lcb->conn_msk)
+        {
+            APPL_TRACE_DEBUG1("conn_msk: 0x%x", p_lcb->conn_msk);
+            /* clean up ssm  */
+            for(xx=0; xx < BTA_AV_NUM_STRS; xx++)
+            {
+                mask = 1 << (xx + 1);
+                if ((mask & p_lcb->conn_msk) && (p_cb->p_scb[xx]) &&
+                    (bdcmp(p_cb->p_scb[xx]->peer_addr, p_data->str_msg.bd_addr) == 0))
+                {
+                    bta_av_ssm_execute(p_cb->p_scb[xx], BTA_AV_AVDT_DISCONNECT_EVT, NULL);
+                }
+            }
+        }
+    }
+    APPL_TRACE_DEBUG1("conn_lcb: 0x%x", p_cb->conn_lcb);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sig_timer
+**
+** Description      process the signal channel timer. This timer is started
+**                  when the AVDTP signal channel is connected. If no profile
+**                  is connected, the timer goes off every BTA_AV_SIG_TIME_VAL
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_sig_timer(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    int     xx;
+    UINT8   mask;
+    tBTA_AV_LCB *p_lcb = NULL;
+    tBTA_AV_PEND pend;
+
+    APPL_TRACE_DEBUG0("bta_av_sig_timer");
+    for(xx=0; xx<BTA_AV_NUM_LINKS; xx++)
+    {
+        mask = 1 << xx;
+        if(mask & p_cb->conn_lcb)
+        {
+            /* this entry is used. check if it is connected */
+            p_lcb = &p_cb->lcb[xx];
+            if(!p_lcb->conn_msk)
+            {
+                bta_sys_start_timer(&p_cb->sig_tmr, BTA_AV_SIG_TIMER_EVT, BTA_AV_SIG_TIME_VAL);
+                bdcpy(pend.bd_addr, p_lcb->addr);
+                (*p_cb->p_cback)(BTA_AV_PENDING_EVT, (tBTA_AV *) &pend);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_acp_sig_timer_cback
+**
+** Description      Process the timeout when SRC is accepting connection
+**                  and SNK did not start signalling.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_acp_sig_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+    UINT8   inx = (UINT8)p_tle->param;
+    tBTA_AV_CB  *p_cb = &bta_av_cb;
+    tBTA_AV_SCB *p_scb = p_cb->p_scb[inx];
+    tBTA_AV_API_OPEN  *p_buf;
+
+    if (p_scb)
+    {
+        APPL_TRACE_DEBUG1("bta_av_acp_sig_timer_cback, coll_mask = 0x%02X", p_scb->coll_mask);
+
+        if (p_scb->coll_mask & BTA_AV_COLL_INC_TMR)
+        {
+            p_scb->coll_mask &= ~BTA_AV_COLL_INC_TMR;
+
+            if (bta_av_is_scb_opening(p_scb))
+            {
+                if (p_scb->p_disc_db)
+                {
+                    /* We are still doing SDP. Run the timer again. */
+                    p_scb->coll_mask |= BTA_AV_COLL_INC_TMR;
+
+                    p_cb->acp_sig_tmr.param = (UINT32)inx;
+                    p_cb->acp_sig_tmr.p_cback = (TIMER_CBACK *)&bta_av_acp_sig_timer_cback;
+                    bta_sys_start_timer(&p_cb->acp_sig_tmr, 0, BTA_AV_ACP_SIG_TIME_VAL);
+                }
+                else
+                {
+                    /* SNK did not start signalling, resume signalling process. */
+                    bta_av_discover_req (p_scb, NULL);
+                }
+            }
+            else if (bta_av_is_scb_incoming(p_scb))
+            {
+                /* Stay in incoming state if SNK does not start signalling */
+
+                /* API open was called right after SNK opened L2C connection. */
+                if (p_scb->coll_mask & BTA_AV_COLL_API_CALLED)
+                {
+                    p_scb->coll_mask &= ~BTA_AV_COLL_API_CALLED;
+
+                    /* BTA_AV_API_OPEN_EVT */
+                    if ((p_buf = (tBTA_AV_API_OPEN *) GKI_getbuf(sizeof(tBTA_AV_API_OPEN))) != NULL)
+                    {
+                        memcpy(p_buf, &(p_scb->open_api), sizeof(tBTA_AV_API_OPEN));
+                        bta_sys_sendmsg(p_buf);
+                    }
+                }
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_check_peer_features
+**
+** Description      checks
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTA_AV_FEAT bta_av_check_peer_features (UINT16 service_uuid)
+{
+    tBTA_AV_FEAT peer_features = 0;
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tSDP_DISC_REC       *p_rec = NULL;
+    tSDP_DISC_ATTR      *p_attr;
+    UINT16              peer_rc_version=0;
+    UINT16              categories = 0;
+
+    APPL_TRACE_DEBUG1("bta_av_check_peer_features service_uuid:x%x", service_uuid);
+    /* loop through all records we found */
+    while (TRUE)
+    {
+        /* get next record; if none found, we're done */
+        if ((p_rec = SDP_FindServiceInDb(p_cb->p_disc_db, service_uuid, p_rec)) == NULL)
+        {
+            break;
+        }
+
+        if (( SDP_FindAttributeInRec(p_rec, ATTR_ID_SERVICE_CLASS_ID_LIST)) != NULL)
+        {
+            /* find peer features */
+            if (SDP_FindServiceInDb(p_cb->p_disc_db, UUID_SERVCLASS_AV_REMOTE_CONTROL, NULL))
+            {
+                peer_features |= BTA_AV_FEAT_RCCT;
+            }
+            if (SDP_FindServiceInDb(p_cb->p_disc_db, UUID_SERVCLASS_AV_REM_CTRL_TARGET, NULL))
+            {
+                peer_features |= BTA_AV_FEAT_RCTG;
+            }
+        }
+
+        if (( SDP_FindAttributeInRec(p_rec, ATTR_ID_BT_PROFILE_DESC_LIST)) != NULL)
+        {
+            /* get profile version (if failure, version parameter is not updated) */
+            SDP_FindProfileVersionInRec(p_rec, UUID_SERVCLASS_AV_REMOTE_CONTROL, &peer_rc_version);
+            APPL_TRACE_DEBUG1("peer_rc_version 0x%x", peer_rc_version);
+
+            if (peer_rc_version >= AVRC_REV_1_3)
+                peer_features |= (BTA_AV_FEAT_VENDOR | BTA_AV_FEAT_METADATA);
+
+            if (peer_rc_version >= AVRC_REV_1_4)
+            {
+                peer_features |= (BTA_AV_FEAT_ADV_CTRL);
+                /* get supported categories */
+                if ((p_attr = SDP_FindAttributeInRec(p_rec,
+                                ATTR_ID_SUPPORTED_FEATURES)) != NULL)
+                {
+                    categories = p_attr->attr_value.v.u16;
+                    if (categories & AVRC_SUPF_CT_BROWSE)
+                        peer_features |= (BTA_AV_FEAT_BROWSE);
+                }
+            }
+        }
+    }
+    APPL_TRACE_DEBUG1("peer_features:x%x", peer_features);
+    return peer_features;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_disc_done
+**
+** Description      Handle AVRCP service discovery results.  If matching
+**                  service found, open AVRCP connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_disc_done(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tBTA_AV_SCB  *p_scb = NULL;
+    tBTA_AV_LCB  *p_lcb;
+    tBTA_AV_RC_OPEN rc_open;
+    tBTA_AV_RC_FEAT rc_feat;
+    UINT8               rc_handle;
+    tBTA_AV_FEAT        peer_features;  /* peer features mask */
+
+    APPL_TRACE_DEBUG1("bta_av_rc_disc_done disc:x%x", p_cb->disc);
+    if (!p_cb->disc)
+    {
+        return;
+    }
+
+    if ((p_cb->disc & BTA_AV_CHNL_MSK) == BTA_AV_CHNL_MSK)
+    {
+        /* this is the rc handle/index to tBTA_AV_RCB */
+        rc_handle = p_cb->disc & (~BTA_AV_CHNL_MSK);
+    }
+    else
+    {
+        p_scb = p_cb->p_scb[(p_cb->disc & BTA_AV_HNDL_MSK) - 1];
+        if (p_scb)
+            rc_handle = p_scb->rc_handle;
+        else
+        {
+            p_cb->disc = 0;
+            return;
+        }
+    }
+
+    APPL_TRACE_DEBUG1("rc_handle %d", rc_handle);
+    peer_features = bta_av_check_peer_features (UUID_SERVCLASS_AV_REMOTE_CONTROL);
+    if ((p_cb->features & BTA_AV_FEAT_ADV_CTRL) && ((peer_features&BTA_AV_FEAT_ADV_CTRL) == 0))
+    {
+        /* if we support advance control and peer does not, check their support on TG role
+         * some implementation uses 1.3 on CT ans 1.4 on TG */
+        peer_features |= bta_av_check_peer_features (UUID_SERVCLASS_AV_REM_CTRL_TARGET);
+    }
+
+    p_cb->disc = 0;
+    utl_freebuf((void **) &p_cb->p_disc_db);
+
+    APPL_TRACE_DEBUG2("peer_features 0x%x, features 0x%x", peer_features, p_cb->features);
+
+    /* if we have no rc connection */
+    if (rc_handle == BTA_AV_RC_HANDLE_NONE)
+    {
+        if (p_scb)
+        {
+            /* if peer remote control service matches ours and USE_RC is TRUE */
+            if ((((p_cb->features & BTA_AV_FEAT_RCCT) && (peer_features & BTA_AV_FEAT_RCTG)) ||
+                 ((p_cb->features & BTA_AV_FEAT_RCTG) && (peer_features & BTA_AV_FEAT_RCCT))) )
+            {
+                p_lcb = bta_av_find_lcb(p_scb->peer_addr, BTA_AV_LCB_FIND);
+                if(p_lcb)
+                {
+                    rc_handle = bta_av_rc_create(p_cb, AVCT_INT, (UINT8)(p_scb->hdi + 1), p_lcb->lidx);
+                    p_cb->rcb[rc_handle].peer_features = peer_features;
+                }
+#if (BT_USE_TRACES == TRUE || BT_TRACE_APPL == TRUE)
+                else
+                {
+                    APPL_TRACE_ERROR0("can not find LCB!!");
+                }
+#endif
+            }
+            else if(p_scb->use_rc)
+            {
+                /* can not find AVRC on peer device. report failure */
+                p_scb->use_rc = FALSE;
+                bdcpy(rc_open.peer_addr, p_scb->peer_addr);
+                rc_open.peer_features = 0;
+                rc_open.status = BTA_AV_FAIL_SDP;
+                (*p_cb->p_cback)(BTA_AV_RC_OPEN_EVT, (tBTA_AV *) &rc_open);
+            }
+        }
+    }
+    else
+    {
+        p_cb->rcb[rc_handle].peer_features = peer_features;
+        rc_feat.rc_handle =  rc_handle;
+        rc_feat.peer_features = peer_features;
+        (*p_cb->p_cback)(BTA_AV_RC_FEAT_EVT, (tBTA_AV *) &rc_feat);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_closed
+**
+** Description      Set AVRCP state to closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_closed(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tBTA_AV_RC_CLOSE rc_close;
+    tBTA_AV_RC_CONN_CHG *p_msg = (tBTA_AV_RC_CONN_CHG *)p_data;
+    tBTA_AV_RCB    *p_rcb;
+    tBTA_AV_SCB    *p_scb;
+    int i;
+    BOOLEAN conn = FALSE;
+    tBTA_AV_LCB *p_lcb;
+
+    rc_close.rc_handle = BTA_AV_RC_HANDLE_NONE;
+    APPL_TRACE_DEBUG1("bta_av_rc_closed rc_handle:%d", p_msg->handle);
+    for(i=0; i<BTA_AV_NUM_RCB; i++)
+    {
+        p_rcb = &p_cb->rcb[i];
+        APPL_TRACE_DEBUG3("bta_av_rc_closed rcb[%d] rc_handle:%d, status=0x%x", i, p_rcb->handle, p_rcb->status);
+        if(p_rcb->handle == p_msg->handle)
+        {
+            rc_close.rc_handle = i;
+            p_rcb->status &= ~BTA_AV_RC_CONN_MASK;
+            p_rcb->peer_features = 0;
+            APPL_TRACE_DEBUG2("       shdl:%d, lidx:%d", p_rcb->shdl, p_rcb->lidx);
+            if(p_rcb->shdl)
+            {
+                p_scb = bta_av_cb.p_scb[p_rcb->shdl - 1];
+                if(p_scb)
+                {
+                    bdcpy(rc_close.peer_addr, p_scb->peer_addr);
+                    if(p_scb->rc_handle == p_rcb->handle)
+                        p_scb->rc_handle = BTA_AV_RC_HANDLE_NONE;
+                    APPL_TRACE_DEBUG2("shdl:%d, srch:%d", p_rcb->shdl, p_scb->rc_handle);
+                }
+                p_rcb->shdl = 0;
+            }
+            else if(p_rcb->lidx == (BTA_AV_NUM_LINKS + 1) )
+            {
+                /* if the RCB uses the extra LCB, use the addr for event and clean it */
+                p_lcb = &p_cb->lcb[BTA_AV_NUM_LINKS];
+                bdcpy(rc_close.peer_addr, p_msg->peer_addr);
+                APPL_TRACE_DEBUG6("rc_only closed bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                              p_msg->peer_addr[0], p_msg->peer_addr[1],
+                              p_msg->peer_addr[2], p_msg->peer_addr[3],
+                              p_msg->peer_addr[4], p_msg->peer_addr[5]);
+                p_lcb->conn_msk = 0;
+                p_lcb->lidx = 0;
+            }
+            p_rcb->lidx = 0;
+
+            if((p_rcb->status & BTA_AV_RC_ROLE_MASK) == BTA_AV_RC_ROLE_INT)
+            {
+                /* AVCT CCB is deallocated */
+                p_rcb->handle = BTA_AV_RC_HANDLE_NONE;
+                p_rcb->status = 0;
+            }
+            else
+            {
+                /* AVCT CCB is still there. dealloc */
+                bta_av_del_rc(p_rcb);
+
+                /* if the AVRCP is no longer listening, create the listening channel */
+                if (bta_av_cb.rc_acp_handle == BTA_AV_RC_HANDLE_NONE && bta_av_cb.features & BTA_AV_FEAT_RCTG)
+                    bta_av_rc_create(&bta_av_cb, AVCT_ACP, 0, BTA_AV_NUM_LINKS + 1);
+            }
+        }
+        else if((p_rcb->handle != BTA_AV_RC_HANDLE_NONE) && (p_rcb->status & BTA_AV_RC_CONN_MASK))
+        {
+            /* at least one channel is still connected */
+            conn = TRUE;
+        }
+    }
+
+    if(!conn)
+    {
+        /* no AVRC channels are connected, go back to INIT state */
+        bta_av_sm_execute(p_cb, BTA_AV_AVRC_NONE_EVT, NULL);
+    }
+
+    if (rc_close.rc_handle == BTA_AV_RC_HANDLE_NONE)
+    {
+        rc_close.rc_handle = p_msg->handle;
+        bdcpy(rc_close.peer_addr, p_msg->peer_addr);
+    }
+    (*p_cb->p_cback)(BTA_AV_RC_CLOSE_EVT, (tBTA_AV *) &rc_close);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rc_disc
+**
+** Description      start AVRC SDP discovery.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_rc_disc(UINT8 disc)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tAVRC_SDP_DB_PARAMS db_params;
+      UINT16              attr_list[] = {ATTR_ID_SERVICE_CLASS_ID_LIST,
+                                       ATTR_ID_BT_PROFILE_DESC_LIST,
+                                       ATTR_ID_SUPPORTED_FEATURES};
+    UINT8       hdi;
+    tBTA_AV_SCB *p_scb;
+    UINT8       *p_addr = NULL;
+    UINT8       rc_handle;
+
+    APPL_TRACE_DEBUG2("bta_av_rc_disc 0x%x, %d", disc, bta_av_cb.disc);
+    if ((bta_av_cb.disc != 0) || (disc == 0))
+        return;
+
+    if ((disc & BTA_AV_CHNL_MSK) == BTA_AV_CHNL_MSK)
+    {
+        /* this is the rc handle/index to tBTA_AV_RCB */
+        rc_handle = disc & (~BTA_AV_CHNL_MSK);
+        if (p_cb->rcb[rc_handle].lidx)
+        {
+            p_addr = p_cb->lcb[p_cb->rcb[rc_handle].lidx-1].addr;
+        }
+    }
+    else
+    {
+        hdi = (disc & BTA_AV_HNDL_MSK) - 1;
+        p_scb = p_cb->p_scb[hdi];
+
+        if (p_scb)
+        {
+            APPL_TRACE_DEBUG1("rc_handle %d", p_scb->rc_handle);
+            p_addr = p_scb->peer_addr;
+        }
+    }
+
+    if (p_addr)
+    {
+        /* allocate discovery database */
+        if (p_cb->p_disc_db == NULL)
+        {
+            p_cb->p_disc_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(BTA_AV_DISC_BUF_SIZE);
+        }
+
+        if (p_cb->p_disc_db)
+        {
+            /* set up parameters */
+            db_params.db_len = BTA_AV_DISC_BUF_SIZE;
+            db_params.num_attr = 3;
+            db_params.p_db = p_cb->p_disc_db;
+            db_params.p_attrs = attr_list;
+
+            /* searching for UUID_SERVCLASS_AV_REMOTE_CONTROL gets both TG and CT */
+            if (AVRC_FindService(UUID_SERVCLASS_AV_REMOTE_CONTROL, p_addr, &db_params,
+                            bta_av_avrc_sdp_cback) == AVRC_SUCCESS)
+            {
+                p_cb->disc = disc;
+                APPL_TRACE_DEBUG1("disc %d", p_cb->disc);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_dereg_comp
+**
+** Description      deregister complete. free the stream control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_dereg_comp(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    tBTA_AV_SCB  *p_scb;
+    tBTA_UTL_COD    cod;
+    UINT8   mask;
+    BT_HDR  *p_buf;
+
+    /* find the stream control block */
+    p_scb = bta_av_hndl_to_scb(p_data->hdr.layer_specific);
+
+    if(p_scb)
+    {
+        APPL_TRACE_DEBUG2("deregistered %d(h%d)", p_scb->chnl, p_scb->hndl);
+        mask = BTA_AV_HNDL_TO_MSK(p_scb->hdi);
+        if(p_scb->chnl == BTA_AV_CHNL_AUDIO)
+        {
+            p_cb->reg_audio  &= ~mask;
+            if ((p_cb->conn_audio & mask) && bta_av_cb.audio_open_cnt)
+            {
+                /* this channel is still marked as open. decrease the count */
+                bta_av_cb.audio_open_cnt--;
+            }
+            p_cb->conn_audio &= ~mask;
+
+            if (p_scb->q_tag == BTA_AV_Q_TAG_STREAM)
+            {
+            /* make sure no buffers are in q_info.a2d */
+            while((p_buf = (BT_HDR*)GKI_dequeue (&p_scb->q_info.a2d)) != NULL)
+                GKI_freebuf(p_buf);
+            }
+
+            /* remove the A2DP SDP record, if no more audio stream is left */
+            if(!p_cb->reg_audio)
+            {
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+                bta_ar_dereg_avrc (UUID_SERVCLASS_AV_REMOTE_CONTROL, BTA_ID_AV);
+#endif
+                bta_av_del_sdp_rec(&p_cb->sdp_a2d_handle);
+                bta_sys_remove_uuid(UUID_SERVCLASS_AUDIO_SOURCE);
+            }
+        }
+        else
+        {
+            p_cb->reg_video  &= ~mask;
+            /* make sure that this channel is not connected */
+            p_cb->conn_video &= ~mask;
+            /* remove the VDP SDP record, (only one video stream at most) */
+            bta_av_del_sdp_rec(&p_cb->sdp_vdp_handle);
+            bta_sys_remove_uuid(UUID_SERVCLASS_VIDEO_SOURCE);
+        }
+
+        /* make sure that the timer is not active */
+        bta_sys_stop_timer(&p_scb->timer);
+        utl_freebuf((void **)&p_cb->p_scb[p_scb->hdi]);
+    }
+
+    APPL_TRACE_DEBUG3("audio 0x%x, video: 0x%x, disable:%d",
+        p_cb->reg_audio, p_cb->reg_video, p_cb->disabling);
+    /* if no stream control block is active */
+    if((p_cb->reg_audio + p_cb->reg_video) == 0)
+    {
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+        /* deregister from AVDT */
+        bta_ar_dereg_avdt(BTA_ID_AV);
+
+        /* deregister from AVCT */
+        bta_ar_dereg_avrc (UUID_SERVCLASS_AV_REM_CTRL_TARGET, BTA_ID_AV);
+        bta_ar_dereg_avct(BTA_ID_AV);
+#endif
+
+        if(p_cb->disabling)
+        {
+            p_cb->disabling     = FALSE;
+            bta_av_cb.features  = 0;
+        }
+
+        /* Clear the Capturing service class bit */
+        cod.service = BTM_COD_SERVICE_CAPTURING;
+        utl_set_device_class(&cod, BTA_UTL_CLR_COD_SERVICE_CLASS);
+    }
+}
+#endif /* BTA_AV_INCLUDED */
diff --git a/bta/av/bta_av_api.c b/bta/av/bta_av_api.c
new file mode 100644
index 0000000..a58e4a6
--- /dev/null
+++ b/bta/av/bta_av_api.c
@@ -0,0 +1,581 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2011-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for the advanced audio/video (AV)
+ *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#if defined(BTA_AV_INCLUDED) && (BTA_AV_INCLUDED == TRUE)
+
+#include "bta_api.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_av_api.h"
+#include "bta_av_int.h"
+#include "gki.h"
+#include <string.h>
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_av_reg =
+{
+    bta_av_hdl_event,
+    BTA_AvDisable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_AvEnable
+**
+** Description      Enable the advanced audio/video service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_AV_ENABLE_EVT. This function must
+**                  be called before other function in the AV API are
+**                  called.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvEnable(tBTA_SEC sec_mask, tBTA_AV_FEAT features, tBTA_AV_CBACK *p_cback)
+{
+    tBTA_AV_API_ENABLE  *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_AV, &bta_av_reg);
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_AV_API_ENABLE *) GKI_getbuf(sizeof(tBTA_AV_API_ENABLE))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_ENABLE_EVT;
+        p_buf->p_cback  = p_cback;
+        p_buf->features = features;
+        p_buf->sec_mask = sec_mask;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvDisable
+**
+** Description      Disable the advanced audio/video service.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    bta_sys_deregister(BTA_ID_AV);
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AV_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvRegister
+**
+** Description      Register the audio or video service to stack. When the
+**                  operation is complete the callback function will be
+**                  called with a BTA_AV_REGISTER_EVT. This function must
+**                  be called before AVDT stream is open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvRegister(tBTA_AV_CHNL chnl, const char *p_service_name, UINT8 app_id)
+{
+    tBTA_AV_API_REG  *p_buf;
+
+
+    if ((p_buf = (tBTA_AV_API_REG *) GKI_getbuf(sizeof(tBTA_AV_API_REG))) != NULL)
+    {
+        p_buf->hdr.layer_specific   = chnl;
+        p_buf->hdr.event = BTA_AV_API_REGISTER_EVT;
+        if(p_service_name)
+        {
+            BCM_STRNCPY_S(p_buf->p_service_name, sizeof(p_buf->p_service_name), p_service_name, BTA_SERVICE_NAME_LEN);
+            p_buf->p_service_name[BTA_SERVICE_NAME_LEN-1] = 0;
+        }
+        else
+        {
+            p_buf->p_service_name[0] = 0;
+        }
+        p_buf->app_id = app_id;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvDeregister
+**
+** Description      Deregister the audio or video service
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvDeregister(tBTA_AV_HNDL hndl)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->layer_specific   = hndl;
+        p_buf->event = BTA_AV_API_DEREGISTER_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvOpen
+**
+** Description      Opens an advanced audio/video connection to a peer device.
+**                  When connection is open callback function is called
+**                  with a BTA_AV_OPEN_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvOpen(BD_ADDR bd_addr, tBTA_AV_HNDL handle, BOOLEAN use_rc, tBTA_SEC sec_mask)
+{
+    tBTA_AV_API_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_OPEN *) GKI_getbuf(sizeof(tBTA_AV_API_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_OPEN_EVT;
+        p_buf->hdr.layer_specific   = handle;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        p_buf->use_rc = use_rc;
+        p_buf->sec_mask = sec_mask;
+        p_buf->switch_res = BTA_AV_RS_NONE;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvClose
+**
+** Description      Close the current streams.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvClose(tBTA_AV_HNDL handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AV_API_CLOSE_EVT;
+        p_buf->layer_specific   = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvDisconnect
+**
+** Description      Close the connection to the address.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvDisconnect(BD_ADDR bd_addr)
+{
+    tBTA_AV_API_DISCNT  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_DISCNT *) GKI_getbuf(sizeof(tBTA_AV_API_DISCNT))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_DISCONNECT_EVT;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvStart
+**
+** Description      Start audio/video stream data transfer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvStart(void)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_AV_API_START_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvStop
+**
+** Description      Stop audio/video stream data transfer.
+**                  If suspend is TRUE, this function sends AVDT suspend signal
+**                  to the connected peer(s).
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvStop(BOOLEAN suspend)
+{
+    tBTA_AV_API_STOP  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_STOP *) GKI_getbuf(sizeof(tBTA_AV_API_STOP))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_STOP_EVT;
+        p_buf->flush   = TRUE;
+        p_buf->suspend = suspend;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvReconfig
+**
+** Description      Reconfigure the audio/video stream.
+**                  If suspend is TRUE, this function tries the suspend/reconfigure
+**                  procedure first.
+**                  If suspend is FALSE or when suspend/reconfigure fails,
+**                  this function closes and re-opens the AVDT connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvReconfig(tBTA_AV_HNDL hndl, BOOLEAN suspend, UINT8 sep_info_idx,
+                    UINT8 *p_codec_info, UINT8 num_protect, UINT8 *p_protect_info)
+{
+    tBTA_AV_API_RCFG  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_RCFG *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_RCFG) + num_protect))) != NULL)
+    {
+        p_buf->hdr.layer_specific   = hndl;
+        p_buf->hdr.event    = BTA_AV_API_RECONFIG_EVT;
+        p_buf->num_protect  = num_protect;
+        p_buf->suspend      = suspend;
+        p_buf->sep_info_idx = sep_info_idx;
+        p_buf->p_protect_info = (UINT8 *)(p_buf + 1);
+        memcpy(p_buf->codec_info, p_codec_info, AVDT_CODEC_SIZE);
+        memcpy(p_buf->p_protect_info, p_protect_info, num_protect);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvProtectReq
+**
+** Description      Send a content protection request.  This function can only
+**                  be used if AV is enabled with feature BTA_AV_FEAT_PROTECT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvProtectReq(tBTA_AV_HNDL hndl, UINT8 *p_data, UINT16 len)
+{
+    tBTA_AV_API_PROTECT_REQ  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_PROTECT_REQ *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_PROTECT_REQ) + len))) != NULL)
+    {
+        p_buf->hdr.layer_specific   = hndl;
+        p_buf->hdr.event = BTA_AV_API_PROTECT_REQ_EVT;
+        p_buf->len       = len;
+        if (p_data == NULL)
+        {
+            p_buf->p_data = NULL;
+        }
+        else
+        {
+            p_buf->p_data = (UINT8 *) (p_buf + 1);
+            memcpy(p_buf->p_data, p_data, len);
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvProtectRsp
+**
+** Description      Send a content protection response.  This function must
+**                  be called if a BTA_AV_PROTECT_REQ_EVT is received.
+**                  This function can only be used if AV is enabled with
+**                  feature BTA_AV_FEAT_PROTECT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvProtectRsp(tBTA_AV_HNDL hndl, UINT8 error_code, UINT8 *p_data, UINT16 len)
+{
+    tBTA_AV_API_PROTECT_RSP  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_PROTECT_RSP *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_PROTECT_RSP) + len))) != NULL)
+    {
+        p_buf->hdr.layer_specific   = hndl;
+        p_buf->hdr.event    = BTA_AV_API_PROTECT_RSP_EVT;
+        p_buf->len          = len;
+        p_buf->error_code   = error_code;
+        if (p_data == NULL)
+        {
+            p_buf->p_data = NULL;
+        }
+        else
+        {
+            p_buf->p_data = (UINT8 *) (p_buf + 1);
+            memcpy(p_buf->p_data, p_data, len);
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvRemoteCmd
+**
+** Description      Send a remote control command.  This function can only
+**                  be used if AV is enabled with feature BTA_AV_FEAT_RCCT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvRemoteCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_RC rc_id, tBTA_AV_STATE key_state)
+{
+    tBTA_AV_API_REMOTE_CMD  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_REMOTE_CMD *) GKI_getbuf(sizeof(tBTA_AV_API_REMOTE_CMD))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_REMOTE_CMD_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        p_buf->msg.op_id = rc_id;
+        p_buf->msg.state = key_state;
+        p_buf->msg.p_pass_data = NULL;
+        p_buf->msg.pass_len = 0;
+        p_buf->label = label;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvVendorCmd
+**
+** Description      Send a vendor dependent remote control command.  This
+**                  function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_VENDOR.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvVendorCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE cmd_code, UINT8 *p_data, UINT16 len)
+{
+    tBTA_AV_API_VENDOR  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_VENDOR *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_VENDOR) + len))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_VENDOR_CMD_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        p_buf->msg.hdr.ctype = cmd_code;
+        p_buf->msg.hdr.subunit_type = AVRC_SUB_PANEL;
+        p_buf->msg.hdr.subunit_id = 0;
+        p_buf->msg.company_id = p_bta_av_cfg->company_id;
+        p_buf->label = label;
+        p_buf->msg.vendor_len = len;
+        if (p_data == NULL)
+        {
+            p_buf->msg.p_vendor_data = NULL;
+        }
+        else
+        {
+            p_buf->msg.p_vendor_data = (UINT8 *) (p_buf + 1);
+            memcpy(p_buf->msg.p_vendor_data, p_data, len);
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvVendorRsp
+**
+** Description      Send a vendor dependent remote control response.
+**                  This function must be called if a BTA_AV_VENDOR_CMD_EVT
+**                  is received. This function can only be used if AV is
+**                  enabled with feature BTA_AV_FEAT_VENDOR.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvVendorRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code, UINT8 *p_data, UINT16 len, UINT32 company_id)
+{
+    tBTA_AV_API_VENDOR  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_VENDOR *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_VENDOR) + len))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_VENDOR_RSP_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        p_buf->msg.hdr.ctype = rsp_code;
+        p_buf->msg.hdr.subunit_type = AVRC_SUB_PANEL;
+        p_buf->msg.hdr.subunit_id = 0;
+        if(company_id)
+            p_buf->msg.company_id = company_id;
+        else
+            p_buf->msg.company_id = p_bta_av_cfg->company_id;
+        p_buf->label = label;
+        p_buf->msg.vendor_len = len;
+        if (p_data == NULL)
+        {
+            p_buf->msg.p_vendor_data = NULL;
+        }
+        else
+        {
+            p_buf->msg.p_vendor_data = (UINT8 *) (p_buf + 1);
+            memcpy(p_buf->msg.p_vendor_data, p_data, len);
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvOpenRc
+**
+** Description      Open an AVRCP connection toward the device with the
+**                  specified handle
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvOpenRc(tBTA_AV_HNDL handle)
+{
+    tBTA_AV_API_OPEN_RC  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_OPEN_RC *) GKI_getbuf(sizeof(tBTA_AV_API_OPEN_RC))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_RC_OPEN_EVT;
+        p_buf->hdr.layer_specific   = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvCloseRc
+**
+** Description      Close an AVRCP connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvCloseRc(UINT8 rc_handle)
+{
+    tBTA_AV_API_CLOSE_RC  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_CLOSE_RC *) GKI_getbuf(sizeof(tBTA_AV_API_CLOSE_RC))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_RC_CLOSE_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvMetaRsp
+**
+** Description      Send a Metadata/Advanced Control response. The message contained
+**                  in p_pkt can be composed with AVRC utility functions.
+**                  This function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_METADATA.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvMetaRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code,
+                               BT_HDR *p_pkt)
+{
+    tBTA_AV_API_META_RSP  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_META_RSP *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_META_RSP)))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_META_RSP_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        p_buf->rsp_code = rsp_code;
+        p_buf->p_pkt = p_pkt;
+        p_buf->is_rsp = TRUE;
+        p_buf->label = label;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_AvMetaCmd
+**
+** Description      Send a Metadata/Advanced Control command. The message contained
+**                  in p_pkt can be composed with AVRC utility functions.
+**                  This function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_METADATA.
+**                  This message is sent only when the peer supports the TG role.
+*8                  The only command makes sense right now is the absolute volume command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_AvMetaCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CMD cmd_code, BT_HDR *p_pkt)
+{
+    tBTA_AV_API_META_RSP  *p_buf;
+
+    if ((p_buf = (tBTA_AV_API_META_RSP *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_API_META_RSP)))) != NULL)
+    {
+        p_buf->hdr.event = BTA_AV_API_META_RSP_EVT;
+        p_buf->hdr.layer_specific   = rc_handle;
+        p_buf->p_pkt = p_pkt;
+        p_buf->rsp_code = cmd_code;
+        p_buf->is_rsp = FALSE;
+        p_buf->label = label;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+#endif /* BTA_AV_INCLUDED */
diff --git a/bta/av/bta_av_cfg.c b/bta/av/bta_av_cfg.c
new file mode 100644
index 0000000..793c772
--- /dev/null
+++ b/bta/av/bta_av_cfg.c
@@ -0,0 +1,231 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for advanced
+ *  audio/video
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+#include "bta_api.h"
+#include "bta_av_int.h"
+
+
+
+#ifndef BTA_AV_RC_PASS_RSP_CODE
+#define BTA_AV_RC_PASS_RSP_CODE     BTA_AV_RSP_NOT_IMPL
+#endif
+
+
+const UINT32  bta_av_meta_caps_co_ids[] = {
+    AVRC_CO_METADATA,
+    AVRC_CO_BROADCOM
+};
+
+/* AVRCP cupported categories */
+#define BTA_AV_RC_SUPF_CT       (AVRC_SUPF_CT_CAT2)
+
+
+/* Added to modify
+**	1. flush timeout
+**	2. Remove Group navigation support in SupportedFeatures
+**	3. GetCapabilities supported event_ids list
+**	4. GetCapabilities supported event_ids count
+*/
+#ifdef ANDROID_APP_INCLUDED
+/* Flushing partial avdtp packets can cause some headsets to disconnect the link
+   if receiving partial a2dp frames */
+const UINT16  bta_av_audio_flush_to[] = {
+     0, /* 1 stream */
+     0, /* 2 streams */
+     0, /* 3 streams */
+     0, /* 4 streams */
+     0  /* 5 streams */
+};     /* AVDTP audio transport channel flush timeout */
+
+/* Note: Android doesnt support AVRC_SUPF_TG_GROUP_NAVI  */
+#define BTA_AV_RC_SUPF_TG       (AVRC_SUPF_TG_CAT1)
+
+
+/*
+ * If the number of event IDs is changed in this array, BTA_AV_ NUM_RC_EVT_IDS   also needs to be changed.
+ */
+const UINT8  bta_av_meta_caps_evt_ids[] = {
+    AVRC_EVT_PLAY_STATUS_CHANGE,
+    AVRC_EVT_TRACK_CHANGE,
+    AVRC_EVT_PLAY_POS_CHANGED,
+    AVRC_EVT_APP_SETTING_CHANGE,
+};
+#ifndef BTA_AV_NUM_RC_EVT_IDS
+#define BTA_AV_NUM_RC_EVT_IDS   (sizeof(bta_av_meta_caps_evt_ids) / sizeof(bta_av_meta_caps_evt_ids[0]))
+#endif /* BTA_AV_NUM_RC_EVT_IDS */
+
+
+#else /* !ANDROID_APP_INCLUDED */
+
+/* Note: if AVRC_SUPF_TG_GROUP_NAVI is set, bta_av_cfg.avrc_group should be TRUE */
+#define BTA_AV_RC_SUPF_TG       (AVRC_SUPF_TG_CAT1)
+
+const UINT16  bta_av_audio_flush_to[] = {
+    120, /* 1 stream  */
+    100, /* 2 streams */
+     80, /* 3 streams */
+     60, /* 4 streams */
+     40  /* 5 streams */
+};     /* AVDTP audio transport channel flush timeout */
+
+
+/*
+ * If the number of event IDs is changed in this array, BTA_AV_ NUM_RC_EVT_IDS   also needs to be changed.
+ */
+const UINT8  bta_av_meta_caps_evt_ids[] = {
+    AVRC_EVT_PLAY_STATUS_CHANGE,
+    AVRC_EVT_TRACK_CHANGE,
+    AVRC_EVT_TRACK_REACHED_END,
+    AVRC_EVT_TRACK_REACHED_START,
+    AVRC_EVT_PLAY_POS_CHANGED,
+    AVRC_EVT_BATTERY_STATUS_CHANGE,
+    AVRC_EVT_SYSTEM_STATUS_CHANGE,
+    AVRC_EVT_APP_SETTING_CHANGE,
+};
+
+#ifndef BTA_AV_NUM_RC_EVT_IDS
+#define BTA_AV_NUM_RC_EVT_IDS   8
+#endif
+
+#endif /* ANDROID_APP_INCLUDED */
+
+/* the MTU for the AVRCP browsing channel */
+#ifndef BTA_AV_MAX_RC_BR_MTU
+#define BTA_AV_MAX_RC_BR_MTU      1008
+#endif
+
+const tBTA_AV_CFG bta_av_cfg =
+{
+    AVRC_CO_BROADCOM,       /* AVRCP Company ID */
+    48,                     /* AVRCP MTU at L2CAP for control channel */
+    BTA_AV_MAX_RC_BR_MTU,   /* AVRCP MTU at L2CAP for browsing channel */
+    BTA_AV_RC_SUPF_CT,      /* AVRCP controller categories */
+    BTA_AV_RC_SUPF_TG,      /* AVRCP target categories */
+    672,                    /* AVDTP signaling channel MTU at L2CAP */
+    BTA_AV_MAX_A2DP_MTU,    /* AVDTP audio transport channel MTU at L2CAP */
+    bta_av_audio_flush_to,  /* AVDTP audio transport channel flush timeout */
+    6,                      /* AVDTP audio channel max data queue size */
+    BTA_AV_MAX_VDP_MTU,     /* AVDTP video transport channel MTU at L2CAP */
+    600,                    /* AVDTP video transport channel flush timeout */
+    TRUE,                   /* TRUE, to accept AVRC 1.3 group nevigation command */
+    2,                      /* company id count in p_meta_co_ids */
+    BTA_AV_NUM_RC_EVT_IDS, /* event id count in p_meta_evt_ids */
+    BTA_AV_RC_PASS_RSP_CODE,/* the default response code for pass through commands */
+    bta_av_meta_caps_co_ids,/* the metadata Get Capabilities response for company id */
+    bta_av_meta_caps_evt_ids,/* the the metadata Get Capabilities response for event id */
+};
+
+tBTA_AV_CFG *p_bta_av_cfg = (tBTA_AV_CFG *) &bta_av_cfg;
+
+const UINT16 bta_av_rc_id[] =
+{
+    0x021F, /* bit mask: 0=SELECT, 1=UP, 2=DOWN, 3=LEFT,
+                         4=RIGHT, 5=RIGHT_UP, 6=RIGHT_DOWN, 7=LEFT_UP,
+                         8=LEFT_DOWN, 9=ROOT_MENU, 10=SETUP_MENU, 11=CONT_MENU,
+                         12=FAV_MENU, 13=EXIT */
+
+    0,      /* not used */
+
+    0x0000, /* bit mask: 0=0, 1=1, 2=2, 3=3,
+                         4=4, 5=5, 6=6, 7=7,
+                         8=8, 9=9, 10=DOT, 11=ENTER,
+                         12=CLEAR */
+
+    0x0003, /* bit mask: 0=CHAN_UP, 1=CHAN_DOWN, 2=PREV_CHAN, 3=SOUND_SEL,
+                         4=INPUT_SEL, 5=DISP_INFO, 6=HELP, 7=PAGE_UP,
+                         8=PAGE_DOWN */
+
+#if (BTA_AV_RC_PASS_RSP_CODE == BTA_AV_RSP_INTERIM)
+    /* btui_app provides an example of how to leave the decision of rejecting a command or not
+     * based on which media player is currently addressed (this is only applicable for AVRCP 1.4 or later)
+     * If the decision is per player for a particular rc_id, the related bit is clear (not set) */
+    0x0070, /* bit mask: 0=POWER, 1=VOL_UP, 2=VOL_DOWN, 3=MUTE,
+                         4=PLAY, 5=STOP, 6=PAUSE, 7=RECORD,
+                         8=REWIND, 9=FAST_FOR, 10=EJECT, 11=FORWARD,
+                         12=BACKWARD */
+#else
+#if (defined BTA_AVRCP_FF_RW_SUPPORT) && (BTA_AVRCP_FF_RW_SUPPORT == TRUE)
+    0x1b70, /* bit mask: 0=POWER, 1=VOL_UP, 2=VOL_DOWN, 3=MUTE,
+                         4=PLAY, 5=STOP, 6=PAUSE, 7=RECORD,
+                         8=REWIND, 9=FAST_FOR, 10=EJECT, 11=FORWARD,
+                         12=BACKWARD */
+#else
+    0x1870, /* bit mask: 0=POWER, 1=VOL_UP, 2=VOL_DOWN, 3=MUTE,
+                         4=PLAY, 5=STOP, 6=PAUSE, 7=RECORD,
+                         8=REWIND, 9=FAST_FOR, 10=EJECT, 11=FORWARD,
+                         12=BACKWARD */
+#endif
+#endif
+
+    0x0000, /* bit mask: 0=ANGLE, 1=SUBPICT */
+
+    0,      /* not used */
+
+    0x0000  /* bit mask: 0=not used, 1=F1, 2=F2, 3=F3,
+                         4=F4, 5=F5 */
+};
+
+#if (BTA_AV_RC_PASS_RSP_CODE == BTA_AV_RSP_INTERIM)
+const UINT16 bta_av_rc_id_ac[] =
+{
+    0x0000, /* bit mask: 0=SELECT, 1=UP, 2=DOWN, 3=LEFT,
+                         4=RIGHT, 5=RIGHT_UP, 6=RIGHT_DOWN, 7=LEFT_UP,
+                         8=LEFT_DOWN, 9=ROOT_MENU, 10=SETUP_MENU, 11=CONT_MENU,
+                         12=FAV_MENU, 13=EXIT */
+
+    0,      /* not used */
+
+    0x0000, /* bit mask: 0=0, 1=1, 2=2, 3=3,
+                         4=4, 5=5, 6=6, 7=7,
+                         8=8, 9=9, 10=DOT, 11=ENTER,
+                         12=CLEAR */
+
+    0x0000, /* bit mask: 0=CHAN_UP, 1=CHAN_DOWN, 2=PREV_CHAN, 3=SOUND_SEL,
+                         4=INPUT_SEL, 5=DISP_INFO, 6=HELP, 7=PAGE_UP,
+                         8=PAGE_DOWN */
+
+    /* btui_app provides an example of how to leave the decision of rejecting a command or not
+     * based on which media player is currently addressed (this is only applicable for AVRCP 1.4 or later)
+     * If the decision is per player for a particular rc_id, the related bit is set */
+    0x1800, /* bit mask: 0=POWER, 1=VOL_UP, 2=VOL_DOWN, 3=MUTE,
+                         4=PLAY, 5=STOP, 6=PAUSE, 7=RECORD,
+                         8=REWIND, 9=FAST_FOR, 10=EJECT, 11=FORWARD,
+                         12=BACKWARD */
+
+    0x0000, /* bit mask: 0=ANGLE, 1=SUBPICT */
+
+    0,      /* not used */
+
+    0x0000  /* bit mask: 0=not used, 1=F1, 2=F2, 3=F3,
+                         4=F4, 5=F5 */
+};
+UINT16 *p_bta_av_rc_id_ac = (UINT16 *) bta_av_rc_id_ac;
+#else
+UINT16 *p_bta_av_rc_id_ac = NULL;
+#endif
+
+UINT16 *p_bta_av_rc_id = (UINT16 *) bta_av_rc_id;
diff --git a/bta/av/bta_av_ci.c b/bta/av/bta_av_ci.c
new file mode 100644
index 0000000..a1c2ac0
--- /dev/null
+++ b/bta/av/bta_av_ci.c
@@ -0,0 +1,98 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for advanced audio/video call-in
+ *  functions.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_av_int.h"
+#include "bta_av_ci.h"
+
+#include <string.h>
+
+/*******************************************************************************
+**
+** Function         bta_av_ci_src_data_ready
+**
+** Description      This function sends an event to the AV indicating that
+**                  the phone has audio stream data ready to send and AV
+**                  should call bta_av_co_audio_src_data_path() or
+**                  bta_av_co_video_src_data_path().
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_ci_src_data_ready(tBTA_AV_CHNL chnl)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->layer_specific   = chnl;
+        p_buf->event = BTA_AV_CI_SRC_DATA_READY_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_ci_setconfig
+**
+** Description      This function must be called in response to function
+**                  bta_av_co_audio_setconfig() or bta_av_co_video_setconfig.
+**                  Parameter err_code is set to an AVDTP status value;
+**                  AVDT_SUCCESS if the codec configuration is ok,
+**                  otherwise error.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_ci_setconfig(tBTA_AV_HNDL hndl, UINT8 err_code, UINT8 category,
+                         UINT8 num_seid, UINT8 *p_seid, BOOLEAN recfg_needed)
+{
+    tBTA_AV_CI_SETCONFIG  *p_buf;
+
+    if ((p_buf = (tBTA_AV_CI_SETCONFIG *) GKI_getbuf(sizeof(tBTA_AV_CI_SETCONFIG))) != NULL)
+    {
+        p_buf->hdr.layer_specific   = hndl;
+        p_buf->hdr.event = (err_code == AVDT_SUCCESS) ?
+                           BTA_AV_CI_SETCONFIG_OK_EVT : BTA_AV_CI_SETCONFIG_FAIL_EVT;
+        p_buf->err_code = err_code;
+        p_buf->category = category;
+        p_buf->recfg_needed = recfg_needed;
+        p_buf->num_seid = num_seid;
+        if(p_seid && num_seid)
+        {
+            p_buf->p_seid   = (UINT8 *)(p_buf + 1);
+            memcpy(p_buf->p_seid, p_seid, num_seid);
+        }
+        else
+        {
+            p_buf->p_seid   = NULL;
+            p_buf->num_seid = 0;
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
diff --git a/bta/av/bta_av_int.h b/bta/av/bta_av_int.h
new file mode 100644
index 0000000..05eb114
--- /dev/null
+++ b/bta/av/bta_av_int.h
@@ -0,0 +1,719 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA advanced audio/video.
+ *
+ ******************************************************************************/
+#ifndef BTA_AV_INT_H
+#define BTA_AV_INT_H
+
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_av_api.h"
+#include "avdt_api.h"
+#include "bta_av_co.h"
+
+#define BTA_AV_DEBUG TRUE
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+enum
+{
+    /* these events are handled by the AV main state machine */
+    BTA_AV_API_DISABLE_EVT = BTA_SYS_EVT_START(BTA_ID_AV),
+    BTA_AV_API_REMOTE_CMD_EVT,
+    BTA_AV_API_VENDOR_CMD_EVT,
+    BTA_AV_API_VENDOR_RSP_EVT,
+    BTA_AV_API_META_RSP_EVT,
+    BTA_AV_API_RC_CLOSE_EVT,
+    BTA_AV_AVRC_OPEN_EVT,
+    BTA_AV_AVRC_MSG_EVT,
+    BTA_AV_AVRC_NONE_EVT,
+
+    /* these events are handled by the AV stream state machine */
+    BTA_AV_API_OPEN_EVT,
+    BTA_AV_API_CLOSE_EVT,
+    BTA_AV_AP_START_EVT,        /* the following 2 events must be in the same order as the *API_*EVT */
+    BTA_AV_AP_STOP_EVT,
+    BTA_AV_API_RECONFIG_EVT,
+    BTA_AV_API_PROTECT_REQ_EVT,
+    BTA_AV_API_PROTECT_RSP_EVT,
+    BTA_AV_API_RC_OPEN_EVT,
+    BTA_AV_SRC_DATA_READY_EVT,
+    BTA_AV_CI_SETCONFIG_OK_EVT,
+    BTA_AV_CI_SETCONFIG_FAIL_EVT,
+    BTA_AV_SDP_DISC_OK_EVT,
+    BTA_AV_SDP_DISC_FAIL_EVT,
+    BTA_AV_STR_DISC_OK_EVT,
+    BTA_AV_STR_DISC_FAIL_EVT,
+    BTA_AV_STR_GETCAP_OK_EVT,
+    BTA_AV_STR_GETCAP_FAIL_EVT,
+    BTA_AV_STR_OPEN_OK_EVT,
+    BTA_AV_STR_OPEN_FAIL_EVT,
+    BTA_AV_STR_START_OK_EVT,
+    BTA_AV_STR_START_FAIL_EVT,
+    BTA_AV_STR_CLOSE_EVT,
+    BTA_AV_STR_CONFIG_IND_EVT,
+    BTA_AV_STR_SECURITY_IND_EVT,
+    BTA_AV_STR_SECURITY_CFM_EVT,
+    BTA_AV_STR_WRITE_CFM_EVT,
+    BTA_AV_STR_SUSPEND_CFM_EVT,
+    BTA_AV_STR_RECONFIG_CFM_EVT,
+    BTA_AV_AVRC_TIMER_EVT,
+    BTA_AV_AVDT_CONNECT_EVT,
+    BTA_AV_AVDT_DISCONNECT_EVT,
+    BTA_AV_ROLE_CHANGE_EVT,
+    BTA_AV_AVDT_DELAY_RPT_EVT,
+    BTA_AV_ACP_CONNECT_EVT,
+
+    /* these events are handled outside of the state machine */
+    BTA_AV_API_ENABLE_EVT,
+    BTA_AV_API_REGISTER_EVT,
+    BTA_AV_API_DEREGISTER_EVT,
+    BTA_AV_API_DISCONNECT_EVT,
+    BTA_AV_CI_SRC_DATA_READY_EVT,
+    BTA_AV_SIG_CHG_EVT,
+    BTA_AV_SIG_TIMER_EVT,
+    BTA_AV_SDP_AVRC_DISC_EVT,
+    BTA_AV_AVRC_CLOSE_EVT,
+    BTA_AV_CONN_CHG_EVT,
+    BTA_AV_DEREG_COMP_EVT,
+#if (AVDT_REPORTING == TRUE)
+    BTA_AV_AVDT_RPT_CONN_EVT,
+#endif
+    BTA_AV_API_START_EVT,       /* the following 2 events must be in the same order as the *AP_*EVT */
+    BTA_AV_API_STOP_EVT
+};
+
+/* events for AV control block state machine */
+#define BTA_AV_FIRST_SM_EVT     BTA_AV_API_DISABLE_EVT
+#define BTA_AV_LAST_SM_EVT      BTA_AV_AVRC_NONE_EVT
+
+/* events for AV stream control block state machine */
+#define BTA_AV_FIRST_SSM_EVT    BTA_AV_API_OPEN_EVT
+
+/* events that do not go through state machine */
+#define BTA_AV_FIRST_NSM_EVT    BTA_AV_API_ENABLE_EVT
+#define BTA_AV_LAST_NSM_EVT     BTA_AV_API_STOP_EVT
+
+/* API events passed to both SSMs (by bta_av_api_to_ssm) */
+#define BTA_AV_FIRST_A2S_API_EVT    BTA_AV_API_START_EVT
+#define BTA_AV_FIRST_A2S_SSM_EVT    BTA_AV_AP_START_EVT
+
+#define BTA_AV_LAST_EVT             BTA_AV_API_STOP_EVT
+
+/* maximum number of SEPS in stream discovery results */
+#define BTA_AV_NUM_SEPS         32
+
+/* initialization value for AVRC handle */
+#define BTA_AV_RC_HANDLE_NONE   0xFF
+
+/* size of database for service discovery */
+#define BTA_AV_DISC_BUF_SIZE        1000
+
+/* offset of media type in codec info byte array */
+#define BTA_AV_MEDIA_TYPE_IDX       1
+
+/* maximum length of AVDTP security data */
+#define BTA_AV_SECURITY_MAX_LEN     400
+
+/* check number of buffers queued at L2CAP when this amount of buffers are queued to L2CAP */
+#define BTA_AV_QUEUE_DATA_CHK_NUM   5
+
+/* the number of ACL links with AVDT */
+#define BTA_AV_NUM_LINKS            AVDT_NUM_LINKS
+
+#define BTA_AV_CO_ID_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); }
+#define BTA_AV_BE_STREAM_TO_CO_ID(u32, p) {u32 = (((UINT32)(*((p) + 2))) + (((UINT32)(*((p) + 1))) << 8) + (((UINT32)(*(p))) << 16)); (p) += 3;}
+
+/* these bits are defined for bta_av_cb.multi_av */
+#define BTA_AV_MULTI_AV_SUPPORTED   0x01
+#define BTA_AV_MULTI_AV_IN_USE      0x02
+
+
+/*****************************************************************************
+**  Data types
+*****************************************************************************/
+
+/* function types for call-out functions */
+typedef BOOLEAN (*tBTA_AV_CO_INIT) (UINT8 *p_codec_type, UINT8 *p_codec_info,
+                                   UINT8 *p_num_protect, UINT8 *p_protect_info, UINT8 index);
+
+typedef void (*tBTA_AV_CO_DISC_RES) (tBTA_AV_HNDL hndl, UINT8 num_seps,
+                                     UINT8 num_snk, BD_ADDR addr);
+
+typedef UINT8 (*tBTA_AV_CO_GETCFG) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                     UINT8 *p_codec_info, UINT8 *p_sep_info_idx, UINT8 seid,
+                                     UINT8 *p_num_protect, UINT8 *p_protect_info);
+typedef void (*tBTA_AV_CO_SETCFG) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                    UINT8 *p_codec_info, UINT8 seid, BD_ADDR addr,
+                                    UINT8 num_protect, UINT8 *p_protect_info);
+typedef void (*tBTA_AV_CO_OPEN) (tBTA_AV_HNDL hndl,
+                                 tBTA_AV_CODEC codec_type, UINT8 *p_codec_info,
+                                   UINT16 mtu);
+typedef void (*tBTA_AV_CO_CLOSE) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type, UINT16 mtu);
+typedef void (*tBTA_AV_CO_START) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type);
+typedef void (*tBTA_AV_CO_STOP) (tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type);
+typedef void * (*tBTA_AV_CO_DATAPATH) (tBTA_AV_CODEC codec_type,
+                                       UINT32 *p_len, UINT32 *p_timestamp);
+typedef void (*tBTA_AV_CO_DELAY) (tBTA_AV_HNDL hndl, UINT16 delay);
+
+/* the call-out functions for one stream */
+typedef struct
+{
+    tBTA_AV_CO_INIT     init;
+    tBTA_AV_CO_DISC_RES disc_res;
+    tBTA_AV_CO_GETCFG   getcfg;
+    tBTA_AV_CO_SETCFG   setcfg;
+    tBTA_AV_CO_OPEN     open;
+    tBTA_AV_CO_CLOSE    close;
+    tBTA_AV_CO_START    start;
+    tBTA_AV_CO_STOP     stop;
+    tBTA_AV_CO_DATAPATH data;
+    tBTA_AV_CO_DELAY    delay;
+} tBTA_AV_CO_FUNCTS;
+
+/* data type for BTA_AV_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_AV_CBACK       *p_cback;
+    tBTA_AV_FEAT        features;
+    tBTA_SEC            sec_mask;
+} tBTA_AV_API_ENABLE;
+
+/* data type for BTA_AV_API_REG_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    char                p_service_name[BTA_SERVICE_NAME_LEN+1];
+    UINT8               app_id;
+} tBTA_AV_API_REG;
+
+
+enum
+{
+    BTA_AV_RS_NONE,     /* straight API call */
+    BTA_AV_RS_OK,       /* the role switch result - successful */
+    BTA_AV_RS_FAIL,     /* the role switch result - failed */
+    BTA_AV_RS_DONE      /* the role switch is done - continue */
+};
+typedef UINT8 tBTA_AV_RS_RES;
+/* data type for BTA_AV_API_OPEN_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+    BOOLEAN             use_rc;
+    tBTA_SEC            sec_mask;
+    tBTA_AV_RS_RES      switch_res;
+} tBTA_AV_API_OPEN;
+
+/* data type for BTA_AV_API_STOP_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BOOLEAN             suspend;
+    BOOLEAN             flush;
+} tBTA_AV_API_STOP;
+
+/* data type for BTA_AV_API_DISCONNECT_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+} tBTA_AV_API_DISCNT;
+
+/* data type for BTA_AV_API_PROTECT_REQ_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               *p_data;
+    UINT16              len;
+} tBTA_AV_API_PROTECT_REQ;
+
+/* data type for BTA_AV_API_PROTECT_RSP_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               *p_data;
+    UINT16              len;
+    UINT8               error_code;
+} tBTA_AV_API_PROTECT_RSP;
+
+/* data type for BTA_AV_API_REMOTE_CMD_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tAVRC_MSG_PASS      msg;
+    UINT8               label;
+} tBTA_AV_API_REMOTE_CMD;
+
+/* data type for BTA_AV_API_VENDOR_CMD_EVT and RSP */
+typedef struct
+{
+    BT_HDR              hdr;
+    tAVRC_MSG_VENDOR    msg;
+    UINT8               label;
+} tBTA_AV_API_VENDOR;
+
+/* data type for BTA_AV_API_RC_OPEN_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+} tBTA_AV_API_OPEN_RC;
+
+/* data type for BTA_AV_API_RC_CLOSE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+} tBTA_AV_API_CLOSE_RC;
+
+/* data type for BTA_AV_API_META_RSP_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BOOLEAN             is_rsp;
+    UINT8               label;
+    tBTA_AV_CODE        rsp_code;
+    BT_HDR              *p_pkt;
+} tBTA_AV_API_META_RSP;
+
+
+/* data type for BTA_AV_API_RECONFIG_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               codec_info[AVDT_CODEC_SIZE];    /* codec configuration */
+    UINT8               *p_protect_info;
+    UINT8               num_protect;
+    BOOLEAN             suspend;
+    UINT8               sep_info_idx;
+} tBTA_AV_API_RCFG;
+
+/* data type for BTA_AV_CI_SETCONFIG_OK_EVT and BTA_AV_CI_SETCONFIG_FAIL_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_AV_HNDL        hndl;
+    UINT8               err_code;
+    UINT8               category;
+    UINT8               num_seid;
+    UINT8               *p_seid;
+    BOOLEAN             recfg_needed;
+} tBTA_AV_CI_SETCONFIG;
+
+/* data type for all stream events from AVDTP */
+typedef struct {
+    BT_HDR              hdr;
+    tAVDT_CFG           cfg;        /* configuration/capabilities parameters */
+    tAVDT_CTRL          msg;        /* AVDTP callback message parameters */
+    BD_ADDR             bd_addr;    /* bd address */
+    UINT8               handle;
+    UINT8               avdt_event;
+    BOOLEAN             initiator; /* TRUE, if local device initiates the SUSPEND */
+} tBTA_AV_STR_MSG;
+
+/* data type for BTA_AV_AVRC_MSG_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tAVRC_MSG           msg;
+    UINT8               handle;
+    UINT8               label;
+    UINT8               opcode;
+} tBTA_AV_RC_MSG;
+
+/* data type for BTA_AV_AVRC_OPEN_EVT, BTA_AV_AVRC_CLOSE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             peer_addr;
+    UINT8               handle;
+} tBTA_AV_RC_CONN_CHG;
+
+/* data type for BTA_AV_CONN_CHG_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             peer_addr;
+    BOOLEAN             is_up;
+} tBTA_AV_CONN_CHG;
+
+/* data type for BTA_AV_ROLE_CHANGE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               new_role;
+    UINT8               hci_status;
+} tBTA_AV_ROLE_RES;
+
+/* data type for BTA_AV_SDP_DISC_OK_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT16              avdt_version;   /* AVDTP protocol version */
+} tBTA_AV_SDP_RES;
+
+/* type for SEP control block */
+typedef struct
+{
+    UINT8               av_handle;      /* AVDTP handle */
+    tBTA_AV_CODEC       codec_type;     /* codec type */
+} tBTA_AV_SEP;
+
+
+/* initiator/acceptor role for adaption */
+#define BTA_AV_ROLE_AD_INT          0x00       /* initiator */
+#define BTA_AV_ROLE_AD_ACP          0x01       /* acceptor */
+
+/* initiator/acceptor signaling roles */
+#define BTA_AV_ROLE_START_ACP       0x00
+#define BTA_AV_ROLE_START_INT       0x10    /* do not change this value */
+
+#define BTA_AV_ROLE_SUSPEND         0x20    /* suspending on start */
+#define BTA_AV_ROLE_SUSPEND_OPT     0x40    /* Suspend on Start option is set */
+
+/* union of all event datatypes */
+typedef union
+{
+    BT_HDR                  hdr;
+    tBTA_AV_API_ENABLE      api_enable;
+    tBTA_AV_API_REG         api_reg;
+    tBTA_AV_API_OPEN        api_open;
+    tBTA_AV_API_STOP        api_stop;
+    tBTA_AV_API_DISCNT      api_discnt;
+    tBTA_AV_API_PROTECT_REQ api_protect_req;
+    tBTA_AV_API_PROTECT_RSP api_protect_rsp;
+    tBTA_AV_API_REMOTE_CMD  api_remote_cmd;
+    tBTA_AV_API_VENDOR      api_vendor;
+    tBTA_AV_API_RCFG        api_reconfig;
+    tBTA_AV_CI_SETCONFIG    ci_setconfig;
+    tBTA_AV_STR_MSG         str_msg;
+    tBTA_AV_RC_MSG          rc_msg;
+    tBTA_AV_RC_CONN_CHG     rc_conn_chg;
+    tBTA_AV_CONN_CHG        conn_chg;
+    tBTA_AV_ROLE_RES        role_res;
+    tBTA_AV_SDP_RES         sdp_res;
+    tBTA_AV_API_META_RSP    api_meta_rsp;
+} tBTA_AV_DATA;
+
+typedef void (tBTA_AV_VDP_DATA_ACT)(void *p_scb);
+
+typedef struct
+{
+    tBTA_AV_VDP_DATA_ACT    *p_act;
+    UINT8                   *p_frame;
+    UINT16                  buf_size;
+    UINT32                  len;
+    UINT32                  offset;
+    UINT32                  timestamp;
+} tBTA_AV_VF_INFO;
+
+typedef union
+{
+    BUFFER_Q            a2d;            /* used for audio channels only */
+    tBTA_AV_VF_INFO     vdp;            /* used for video channels only */
+    tBTA_AV_API_OPEN    open;           /* used only before open and role switch
+                                           is needed on another AV channel */
+} tBTA_AV_Q_INFO;
+
+#define BTA_AV_Q_TAG_OPEN               0x01 /* after API_OPEN, before STR_OPENED */
+#define BTA_AV_Q_TAG_START              0x02 /* before start sending media packets */
+#define BTA_AV_Q_TAG_STREAM             0x03 /* during streaming */
+
+#define BTA_AV_WAIT_ACP_CAPS_ON         0x01 /* retriving the peer capabilities */
+#define BTA_AV_WAIT_ACP_CAPS_STARTED    0x02 /* started while retriving peer capabilities */
+#define BTA_AV_WAIT_ROLE_SW_RES_OPEN    0x04 /* waiting for role switch result after API_OPEN, before STR_OPENED */
+#define BTA_AV_WAIT_ROLE_SW_RES_START   0x08 /* waiting for role switch result before streaming */
+#define BTA_AV_WAIT_ROLE_SW_STARTED     0x10 /* started while waiting for role switch result */
+#define BTA_AV_WAIT_ROLE_SW_RETRY       0x20 /* set when retry on timeout */
+#define BTA_AV_WAIT_CHECK_RC            0x40 /* set when the timer is used by role switch */
+#define BTA_AV_WAIT_ROLE_SW_FAILED      0x80 /* role switch failed */
+
+#define BTA_AV_WAIT_ROLE_SW_BITS        (BTA_AV_WAIT_ROLE_SW_RES_OPEN|BTA_AV_WAIT_ROLE_SW_RES_START|BTA_AV_WAIT_ROLE_SW_STARTED|BTA_AV_WAIT_ROLE_SW_RETRY)
+
+/* Bitmap for collision, coll_mask */
+#define BTA_AV_COLL_INC_TMR             0x01 /* Timer is running for incoming L2C connection */
+#define BTA_AV_COLL_API_CALLED          0x02 /* API open was called while incoming timer is running */
+
+/* type for AV stream control block */
+typedef struct
+{
+    const tBTA_AV_ACT   *p_act_tbl;     /* the action table for stream state machine */
+    const tBTA_AV_CO_FUNCTS *p_cos;     /* the associated callout functions */
+    tSDP_DISCOVERY_DB   *p_disc_db;     /* pointer to discovery database */
+    tBTA_AV_SEP         seps[BTA_AV_MAX_SEPS];
+    tAVDT_CFG           *p_cap;         /* buffer used for get capabilities */
+    tBTA_AV_Q_INFO      q_info;
+    tAVDT_SEP_INFO      sep_info[BTA_AV_NUM_SEPS];      /* stream discovery results */
+    tAVDT_CFG           cfg;            /* local SEP configuration */
+    TIMER_LIST_ENT      timer;          /* delay timer for AVRC CT */
+    BD_ADDR             peer_addr;      /* peer BD address */
+    UINT16              l2c_cid;        /* L2CAP channel ID */
+    UINT16              stream_mtu;     /* MTU of stream */
+    UINT16              avdt_version;   /* the avdt version of peer device */
+    tBTA_SEC            sec_mask;       /* security mask */
+    tBTA_AV_CODEC       codec_type;     /* codec type */
+    UINT8               media_type;     /* Media type */
+    BOOLEAN             cong;           /* TRUE if AVDTP congested */
+    tBTA_AV_STATUS      open_status;    /* open failure status */
+    tBTA_AV_CHNL        chnl;           /* the channel: audio/video */
+    tBTA_AV_HNDL        hndl;           /* the handle: ((hdi + 1)|chnl) */
+    UINT16              cur_psc_mask;   /* Protocol service capabilities mask for current connection */
+    UINT8               avdt_handle;    /* AVDTP handle */
+    UINT8               hdi;            /* the index to SCB[] */
+    UINT8               num_seps;       /* number of seps returned by stream discovery */
+    UINT8               num_disc_snks;  /* number of discovered snks */
+    UINT8               sep_info_idx;   /* current index into sep_info */
+    UINT8               sep_idx;        /* current index into local seps[] */
+    UINT8               rcfg_idx;       /* reconfig requested index into sep_info */
+    UINT8               state;          /* state machine state */
+    UINT8               avdt_label;     /* AVDTP label */
+    UINT8               app_id;         /* application id */
+    UINT8               num_recfg;      /* number of reconfigure sent */
+    UINT8               role;
+    UINT8               l2c_bufs;       /* the number of buffers queued to L2CAP */
+    UINT8               rc_handle;      /* connected AVRCP handle */
+    BOOLEAN             use_rc;         /* TRUE if AVRCP is allowed */
+    BOOLEAN             started;        /* TRUE if stream started */
+    UINT8               co_started;     /* non-zero, if stream started from call-out perspective */
+    BOOLEAN             recfg_sup;      /* TRUE if the first attempt to reconfigure the stream was successfull, else False if command fails */
+    BOOLEAN             suspend_sup;    /* TRUE if Suspend stream is supported, else FALSE if suspend command fails */
+    BOOLEAN             deregistring;   /* TRUE if deregistering */
+    BOOLEAN             sco_suspend;    /* TRUE if SUSPEND is issued automatically for SCO */
+    UINT8               coll_mask;      /* Mask to check incoming and outgoing collision */
+    tBTA_AV_API_OPEN    open_api;       /* Saved OPEN api message */
+    UINT8               wait;           /* set 0x1, when getting Caps as ACP, set 0x2, when started */
+    UINT8               q_tag;          /* identify the associated q_info union member */
+} tBTA_AV_SCB;
+
+#define BTA_AV_RC_ROLE_MASK     0x10
+#define BTA_AV_RC_ROLE_INT      0x00
+#define BTA_AV_RC_ROLE_ACP      0x10
+
+#define BTA_AV_RC_CONN_MASK     0x20
+
+/* type for AV RCP control block */
+/* index to this control block is the rc handle */
+typedef struct
+{
+    UINT8   status;
+    UINT8   handle;
+    UINT8   shdl;   /* stream handle (hdi + 1) */
+    UINT8   lidx;   /* (index+1) to LCB */
+    tBTA_AV_FEAT        peer_features;  /* peer features mask */
+} tBTA_AV_RCB;
+#define BTA_AV_NUM_RCB      (BTA_AV_NUM_STRS  + 2)
+
+enum
+{
+    BTA_AV_LCB_FREE,
+    BTA_AV_LCB_FIND
+};
+
+/* type for AV ACL Link control block */
+typedef struct
+{
+    BD_ADDR             addr;           /* peer BD address */
+    UINT8               conn_msk;       /* handle mask of connected stream handle */
+    UINT8               lidx;           /* index + 1 */
+} tBTA_AV_LCB;
+
+/* type for stream state machine action functions */
+typedef void (*tBTA_AV_SACT)(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+
+
+/* type for AV control block */
+typedef struct
+{
+    tBTA_AV_SCB         *p_scb[BTA_AV_NUM_STRS];    /* stream control block */
+    tSDP_DISCOVERY_DB   *p_disc_db;     /* pointer to discovery database */
+    tBTA_AV_CBACK       *p_cback;       /* application callback function */
+    tBTA_AV_RCB         rcb[BTA_AV_NUM_RCB];  /* RCB control block */
+    tBTA_AV_LCB         lcb[BTA_AV_NUM_LINKS+1];  /* link control block */
+    TIMER_LIST_ENT      sig_tmr;        /* link timer */
+    TIMER_LIST_ENT      acp_sig_tmr;    /* timer to monitor signalling when accepting */
+    UINT32              sdp_a2d_handle; /* SDP record handle for audio src */
+    UINT32              sdp_vdp_handle; /* SDP record handle for video src */
+    tBTA_AV_FEAT        features;       /* features mask */
+    tBTA_SEC            sec_mask;       /* security mask */
+    tBTA_AV_HNDL        handle;         /* the handle for SDP activity */
+    BOOLEAN             disabling;      /* TRUE if api disabled called */
+    UINT8               disc;           /* (hdi+1) or (rc_handle|BTA_AV_CHNL_MSK) if p_disc_db is in use */
+    UINT8               state;          /* state machine state */
+    UINT8               conn_rc;        /* handle mask of connected RCP channels */
+    UINT8               conn_audio;     /* handle mask of connected audio channels */
+    UINT8               conn_video;     /* handle mask of connected video channels */
+    UINT8               conn_lcb;       /* index mask of used LCBs */
+    UINT8               audio_open_cnt; /* number of connected audio channels */
+    UINT8               reg_audio;      /* handle mask of registered audio channels */
+    UINT8               reg_video;      /* handle mask of registered video channels */
+    UINT8               rc_acp_handle;
+    UINT8               rc_acp_idx;     /* (index + 1) to RCB */
+    UINT8               rs_idx;         /* (index + 1) to SCB for the one waiting for RS on open */
+    BOOLEAN             sco_occupied;   /* TRUE if SCO is being used or call is in progress */
+    UINT8               audio_streams;  /* handle mask of streaming audio channels */
+    UINT8               video_streams;  /* handle mask of streaming video channels */
+} tBTA_AV_CB;
+
+
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* control block declaration */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_AV_CB bta_av_cb;
+#else
+extern tBTA_AV_CB *bta_av_cb_ptr;
+#define bta_av_cb (*bta_av_cb_ptr)
+#endif
+
+/* config struct */
+extern tBTA_AV_CFG *p_bta_av_cfg;
+
+/* rc id config struct */
+extern UINT16 *p_bta_av_rc_id;
+extern UINT16 *p_bta_av_rc_id_ac;
+
+extern const tBTA_AV_SACT bta_av_a2d_action[];
+extern const tBTA_AV_CO_FUNCTS bta_av_a2d_cos;
+extern const tBTA_AV_SACT bta_av_vdp_action[];
+extern tAVDT_CTRL_CBACK * const bta_av_dt_cback[];
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+/* utility functions */
+extern tBTA_AV_SCB *bta_av_hndl_to_scb(UINT16 handle);
+extern BOOLEAN bta_av_chk_start(tBTA_AV_SCB *p_scb);
+extern void bta_av_restore_switch (void);
+extern UINT16 bta_av_chk_mtu(tBTA_AV_SCB *p_scb, UINT16 mtu);
+extern void bta_av_conn_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data);
+extern UINT8 bta_av_rc_create(tBTA_AV_CB *p_cb, UINT8 role, UINT8 shdl, UINT8 lidx);
+extern void bta_av_proc_stream_evt(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data, int index);
+extern void bta_av_stream_chg(tBTA_AV_SCB *p_scb, BOOLEAN started);
+extern BOOLEAN bta_av_is_scb_opening (tBTA_AV_SCB *p_scb);
+extern BOOLEAN bta_av_is_scb_incoming (tBTA_AV_SCB *p_scb);
+extern void bta_av_set_scb_sst_init (tBTA_AV_SCB *p_scb);
+extern BOOLEAN bta_av_is_scb_init (tBTA_AV_SCB *p_scb);
+extern void bta_av_set_scb_sst_incoming (tBTA_AV_SCB *p_scb);
+extern tBTA_AV_LCB * bta_av_find_lcb(BD_ADDR addr, UINT8 op);
+
+
+/* main functions */
+extern void bta_av_api_deregister(tBTA_AV_DATA *p_data);
+extern void bta_av_dup_audio_buf(tBTA_AV_SCB *p_scb, BT_HDR *p_buf);
+extern void bta_av_sm_execute(tBTA_AV_CB *p_cb, UINT16 event, tBTA_AV_DATA *p_data);
+extern void bta_av_ssm_execute(tBTA_AV_SCB *p_scb, UINT16 event, tBTA_AV_DATA *p_data);
+extern BOOLEAN bta_av_hdl_event(BT_HDR *p_msg);
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+extern char *bta_av_evt_code(UINT16 evt_code);
+#endif
+extern BOOLEAN bta_av_switch_if_needed(tBTA_AV_SCB *p_scb);
+extern BOOLEAN bta_av_link_role_ok(tBTA_AV_SCB *p_scb, UINT8 bits);
+extern BOOLEAN bta_av_is_rcfg_sst(tBTA_AV_SCB *p_scb);
+
+/* nsm action functions */
+extern void bta_av_api_disconnect(tBTA_AV_DATA *p_data);
+extern void bta_av_sig_chg(tBTA_AV_DATA *p_data);
+extern void bta_av_sig_timer(tBTA_AV_DATA *p_data);
+extern void bta_av_rc_disc_done(tBTA_AV_DATA *p_data);
+extern void bta_av_rc_closed(tBTA_AV_DATA *p_data);
+extern void bta_av_rc_disc(UINT8 disc);
+extern void bta_av_conn_chg(tBTA_AV_DATA *p_data);
+extern void bta_av_dereg_comp(tBTA_AV_DATA *p_data);
+
+/* sm action functions */
+extern void bta_av_disable (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_opened (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_remote_cmd (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_vendor_cmd (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_vendor_rsp (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_msg (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_close (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_meta_rsp (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_free_rsp (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+extern void bta_av_rc_free_msg (tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+
+extern tBTA_AV_RCB * bta_av_get_rcb_by_shdl(UINT8 shdl);
+extern void bta_av_del_rc(tBTA_AV_RCB *p_rcb);
+
+/* ssm action functions */
+extern void bta_av_do_disc_a2d (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_cleanup (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_free_sdb (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_config_ind (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_disconnect_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_security_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_security_rsp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_setconfig_rsp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_st_rc_timer(tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_str_opened (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_security_ind (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_security_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_do_close (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_connect_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_sdp_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_disc_results (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_disc_res_as_acp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_open_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_getcap_results (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_setconfig_rej (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_discover_req (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_conn_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_do_start (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_str_stopped (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_reconfig (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_data_path (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_start_ok (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_start_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_str_closed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_clr_cong (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_suspend_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_str_ok (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_failed (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_connect (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_discntd (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_suspend_cont (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_cfm (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rcfg_open (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_security_rej (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_open_rc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_chk_2nd_start (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_save_caps (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rej_conn (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_rej_conn (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_set_use_rc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_cco_close (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_switch_role (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_role_res (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_delay_co (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_open_at_inc (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+
+/* ssm action functions - vdp specific */
+extern void bta_av_do_disc_vdp (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_vdp_str_opened (tBTA_AV_SCB *p_scb, tBTA_AV_DATA *p_data);
+extern void bta_av_reg_vdp (tAVDT_CS *p_cs, char *p_service_name, void *p_data);
+
+#endif /* BTA_AV_INT_H */
diff --git a/bta/av/bta_av_main.c b/bta/av/bta_av_main.c
new file mode 100644
index 0000000..085362d
--- /dev/null
+++ b/bta/av/bta_av_main.c
@@ -0,0 +1,1323 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the main implementation file for the BTA advanced audio/video.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#if defined(BTA_AV_INCLUDED) && (BTA_AV_INCLUDED == TRUE)
+
+#include <string.h>
+#include "bta_av_int.h"
+#include "utl.h"
+#include "bd.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "bta_av_co.h"
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#include "bta_ar_api.h"
+#endif
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+/* AVDTP protocol timeout values */
+#ifndef BTA_AV_RET_TOUT
+#define BTA_AV_RET_TOUT     4
+#endif
+
+#ifndef BTA_AV_SIG_TOUT
+#define BTA_AV_SIG_TOUT     4
+#endif
+
+#ifndef BTA_AV_IDLE_TOUT
+#define BTA_AV_IDLE_TOUT    10
+#endif
+
+/* the delay time in milliseconds to retry role switch */
+#ifndef BTA_AV_RS_TIME_VAL
+#define BTA_AV_RS_TIME_VAL     1000
+#endif
+
+/* state machine states */
+enum
+{
+    BTA_AV_INIT_ST,
+    BTA_AV_OPEN_ST
+};
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_AV_DISABLE,
+    BTA_AV_RC_OPENED,
+    BTA_AV_RC_REMOTE_CMD,
+    BTA_AV_RC_VENDOR_CMD,
+    BTA_AV_RC_VENDOR_RSP,
+    BTA_AV_RC_FREE_RSP,
+    BTA_AV_RC_FREE_MSG,
+    BTA_AV_RC_META_RSP,
+    BTA_AV_RC_MSG,
+    BTA_AV_RC_CLOSE,
+    BTA_AV_NUM_ACTIONS
+};
+
+#define BTA_AV_IGNORE       BTA_AV_NUM_ACTIONS
+
+/* type for action functions */
+typedef void (*tBTA_AV_ACTION)(tBTA_AV_CB *p_cb, tBTA_AV_DATA *p_data);
+
+/* action functions */
+const tBTA_AV_ACTION bta_av_action[] =
+{
+    bta_av_disable,
+    bta_av_rc_opened,
+    bta_av_rc_remote_cmd,
+    bta_av_rc_vendor_cmd,
+    bta_av_rc_vendor_rsp,
+    bta_av_rc_free_rsp,
+    bta_av_rc_free_msg,
+    bta_av_rc_meta_rsp,
+    bta_av_rc_msg,
+    bta_av_rc_close,
+    NULL
+};
+
+/* state table information */
+#define BTA_AV_ACTION_COL           0       /* position of actions */
+#define BTA_AV_NEXT_STATE           1       /* position of next state */
+#define BTA_AV_NUM_COLS             2       /* number of columns in state tables */
+
+/* state table for init state */
+static const UINT8 bta_av_st_init[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Next state */
+/* API_DISABLE_EVT */       {BTA_AV_DISABLE,        BTA_AV_INIT_ST },
+/* API_REMOTE_CMD_EVT */    {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+/* API_VENDOR_CMD_EVT */    {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+/* API_VENDOR_RSP_EVT */    {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+/* API_META_RSP_EVT */      {BTA_AV_RC_FREE_RSP,    BTA_AV_INIT_ST },
+/* API_RC_CLOSE_EVT */      {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+/* AVRC_OPEN_EVT */         {BTA_AV_RC_OPENED,      BTA_AV_OPEN_ST },
+/* AVRC_MSG_EVT */          {BTA_AV_RC_FREE_MSG,    BTA_AV_INIT_ST },
+/* AVRC_NONE_EVT */         {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+};
+
+/* state table for open state */
+static const UINT8 bta_av_st_open[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Next state */
+/* API_DISABLE_EVT */       {BTA_AV_DISABLE,        BTA_AV_INIT_ST },
+/* API_REMOTE_CMD_EVT */    {BTA_AV_RC_REMOTE_CMD,  BTA_AV_OPEN_ST },
+/* API_VENDOR_CMD_EVT */    {BTA_AV_RC_VENDOR_CMD,  BTA_AV_OPEN_ST },
+/* API_VENDOR_RSP_EVT */    {BTA_AV_RC_VENDOR_RSP,  BTA_AV_OPEN_ST },
+/* API_META_RSP_EVT */      {BTA_AV_RC_META_RSP,    BTA_AV_OPEN_ST },
+/* API_RC_CLOSE_EVT */      {BTA_AV_RC_CLOSE,       BTA_AV_OPEN_ST },
+/* AVRC_OPEN_EVT */         {BTA_AV_RC_OPENED,      BTA_AV_OPEN_ST },
+/* AVRC_MSG_EVT */          {BTA_AV_RC_MSG,         BTA_AV_OPEN_ST },
+/* AVRC_NONE_EVT */         {BTA_AV_IGNORE,         BTA_AV_INIT_ST },
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_AV_ST_TBL)[BTA_AV_NUM_COLS];
+
+/* state table */
+static const tBTA_AV_ST_TBL bta_av_st_tbl[] =
+{
+    bta_av_st_init,
+    bta_av_st_open
+};
+
+typedef void (*tBTA_AV_NSM_ACT)(tBTA_AV_DATA *p_data);
+static void bta_av_api_enable(tBTA_AV_DATA *p_data);
+static void bta_av_api_register(tBTA_AV_DATA *p_data);
+static void bta_av_ci_data(tBTA_AV_DATA *p_data);
+#if (AVDT_REPORTING == TRUE)
+static void bta_av_rpc_conn(tBTA_AV_DATA *p_data);
+#endif
+static void bta_av_api_to_ssm(tBTA_AV_DATA *p_data);
+
+static void bta_av_sco_chg_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8
+                                 app_id, BD_ADDR peer_addr);
+static void bta_av_sys_rs_cback (tBTA_SYS_CONN_STATUS status,UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+
+
+/* action functions */
+const tBTA_AV_NSM_ACT bta_av_nsm_act[] =
+{
+    bta_av_api_enable,      /* BTA_AV_API_ENABLE_EVT */
+    bta_av_api_register,    /* BTA_AV_API_REGISTER_EVT */
+    bta_av_api_deregister,  /* BTA_AV_API_DEREGISTER_EVT */
+    bta_av_api_disconnect,  /* BTA_AV_API_DISCONNECT_EVT */
+    bta_av_ci_data,         /* BTA_AV_CI_SRC_DATA_READY_EVT */
+    bta_av_sig_chg,         /* BTA_AV_SIG_CHG_EVT */
+    bta_av_sig_timer,       /* BTA_AV_SIG_TIMER_EVT */
+    bta_av_rc_disc_done,    /* BTA_AV_SDP_AVRC_DISC_EVT */
+    bta_av_rc_closed,       /* BTA_AV_AVRC_CLOSE_EVT */
+    bta_av_conn_chg,        /* BTA_AV_CONN_CHG_EVT */
+    bta_av_dereg_comp,      /* BTA_AV_DEREG_COMP_EVT */
+#if (AVDT_REPORTING == TRUE)
+    bta_av_rpc_conn,        /* BTA_AV_AVDT_RPT_CONN_EVT */
+#endif
+    bta_av_api_to_ssm,      /* BTA_AV_API_START_EVT */
+    bta_av_api_to_ssm,      /* BTA_AV_API_STOP_EVT */
+};
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+
+/* AV control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_AV_CB  bta_av_cb;
+#endif
+
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+static char *bta_av_st_code(UINT8 state);
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_timer_cback
+**
+** Description      forward the event to stream state machine
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_timer_cback(void *p_tle)
+{
+    BT_HDR          *p_buf;
+    TIMER_LIST_ENT  *p = (TIMER_LIST_ENT *)p_tle;
+    int xx;
+    tBTA_AV_SCB *p_scb = NULL;
+
+    /* find the SCB that has the timer */
+    for(xx=0; xx<BTA_AV_NUM_STRS; xx++)
+    {
+        if(bta_av_cb.p_scb[xx] && &(bta_av_cb.p_scb[xx]->timer)== p)
+        {
+            p_scb = bta_av_cb.p_scb[xx];
+            break;
+        }
+    }
+
+    if (p_scb && (p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        /* send the event through the audio state machine.
+         * only when the audio SM is open, the main SM opens the RC connection as INT */
+        p_buf->event = p->event;
+        p_buf->layer_specific = p_scb->hndl;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_api_enable
+**
+** Description      Handle an API enable event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_api_enable(tBTA_AV_DATA *p_data)
+{
+    int i;
+    tBTA_AV_ENABLE      enable;
+
+    /* initialize control block */
+    memset(&bta_av_cb, 0, sizeof(tBTA_AV_CB));
+
+    for(i=0; i<BTA_AV_NUM_RCB; i++)
+        bta_av_cb.rcb[i].handle = BTA_AV_RC_HANDLE_NONE;
+
+    bta_av_cb.rc_acp_handle = BTA_AV_RC_HANDLE_NONE;
+
+    /* store parameters */
+    bta_av_cb.p_cback  = p_data->api_enable.p_cback;
+    bta_av_cb.features = p_data->api_enable.features;
+    bta_av_cb.sec_mask = p_data->api_enable.sec_mask;
+
+    enable.features = bta_av_cb.features;
+
+    /* Register for SCO change event */
+    if (!(bta_av_cb.features & BTA_AV_FEAT_NO_SCO_SSPD))
+    {
+        bta_sys_sco_register(bta_av_sco_chg_cback);
+    }
+
+    /* call callback with enable event */
+    (*bta_av_cb.p_cback)(BTA_AV_ENABLE_EVT, (tBTA_AV *)&enable);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_addr_to_scb
+**
+** Description      find the stream control block by the peer addr
+**
+** Returns          void
+**
+*******************************************************************************/
+static tBTA_AV_SCB * bta_av_addr_to_scb(BD_ADDR bd_addr)
+{
+    tBTA_AV_SCB * p_scb = NULL;
+    int         xx;
+
+    for(xx=0; xx<BTA_AV_NUM_STRS; xx++)
+    {
+        if(bta_av_cb.p_scb[xx])
+        {
+            if(!bdcmp(bd_addr, bta_av_cb.p_scb[xx]->peer_addr))
+            {
+                p_scb = bta_av_cb.p_scb[xx];
+                break;
+            }
+        }
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_hndl_to_scb
+**
+** Description      find the stream control block by the handle
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTA_AV_SCB * bta_av_hndl_to_scb(UINT16 handle)
+{
+    tBTA_AV_HNDL hndl = (tBTA_AV_HNDL)handle;
+    tBTA_AV_SCB * p_scb = NULL;
+    UINT8 idx = (hndl & BTA_AV_HNDL_MSK);
+
+    if(idx && (idx <= BTA_AV_NUM_STRS) )
+    {
+        p_scb = bta_av_cb.p_scb[idx-1];
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_alloc_scb
+**
+** Description      allocate stream control block,
+**                  register the service to stack
+**                  create SDP record
+**
+** Returns          void
+**
+*******************************************************************************/
+static tBTA_AV_SCB * bta_av_alloc_scb(tBTA_AV_CHNL chnl)
+{
+    tBTA_AV_SCB *p_ret = NULL;
+    int         xx;
+    tBTA_AV_STATUS sts = BTA_AV_SUCCESS;
+
+    if(chnl == BTA_AV_CHNL_VIDEO)
+    {
+        if(p_bta_av_cfg->p_act_tbl == NULL || p_bta_av_cfg->p_reg == NULL)
+        {
+            APPL_TRACE_ERROR0("Video streaming not supported");
+            sts = BTA_AV_FAIL;
+        }
+        else
+        {
+            /* allow only one Video channel */
+            if(bta_av_cb.reg_video)
+            {
+                APPL_TRACE_ERROR0("Already registered");
+                sts = BTA_AV_FAIL;
+            }
+        }
+    }
+    else if(chnl != BTA_AV_CHNL_AUDIO)
+    {
+        APPL_TRACE_ERROR1("bad channel: %d", chnl);
+        sts = BTA_AV_FAIL;
+    }
+
+    if(sts == BTA_AV_SUCCESS)
+    {
+        for(xx=0; xx<BTA_AV_NUM_STRS; xx++)
+        {
+            if(bta_av_cb.p_scb[xx] == NULL)
+            {
+                /* found an empty spot */
+                p_ret = (tBTA_AV_SCB *)GKI_getbuf(sizeof(tBTA_AV_SCB));
+                if(p_ret)
+                {
+                    memset(p_ret, 0, sizeof(tBTA_AV_SCB));
+                    p_ret->rc_handle = BTA_AV_RC_HANDLE_NONE;
+                    p_ret->chnl = chnl;
+                    p_ret->hndl = (tBTA_AV_HNDL)((xx + 1) | chnl);
+                    p_ret->hdi  = xx;
+                    bta_av_cb.p_scb[xx] = p_ret;
+                }
+                break;
+            }
+        }
+    }
+    return p_ret;
+}
+
+/*******************************************************************************
+*******************************************************************************/
+void bta_av_conn_cback(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDT_CTRL *p_data)
+{
+    tBTA_AV_STR_MSG     *p_msg;
+    UINT16  evt = 0;
+    tBTA_AV_SCB *p_scb = NULL;
+
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+    if (event == BTA_AR_AVDT_CONN_EVT ||
+        event == AVDT_CONNECT_IND_EVT || event == AVDT_DISCONNECT_IND_EVT)
+#else
+    if (event == AVDT_CONNECT_IND_EVT || event == AVDT_DISCONNECT_IND_EVT)
+#endif
+    {
+        evt = BTA_AV_SIG_CHG_EVT;
+        if(AVDT_DISCONNECT_IND_EVT == event)
+            p_scb = bta_av_addr_to_scb(bd_addr);
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+        else if (AVDT_CONNECT_IND_EVT == event)
+        {
+            APPL_TRACE_DEBUG1("CONN_IND is ACP:%d", p_data->hdr.err_param);
+        }
+#endif
+
+        if (/*((p_scb && (p_scb->role & BTA_AV_ROLE_AD_ACP)) ||
+
+            //(AVDT_CONNECT_IND_EVT == event && AVDT_ACP == p_data->hdr.err_param))
+
+            (AVDT_CONNECT_IND_EVT == event))&& */
+            (p_msg = (tBTA_AV_STR_MSG *) GKI_getbuf((UINT16) (sizeof(tBTA_AV_STR_MSG)))) != NULL)
+        {
+            p_msg->hdr.event = evt;
+            p_msg->hdr.layer_specific = event;
+            p_msg->hdr.offset = p_data->hdr.err_param;
+            bdcpy(p_msg->bd_addr, bd_addr);
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+            if(p_scb)
+            {
+                APPL_TRACE_DEBUG2("scb hndl x%x, role x%x", p_scb->hndl, p_scb->role);
+            }
+#endif
+            APPL_TRACE_DEBUG6("conn_cback bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                          bd_addr[0], bd_addr[1],
+                          bd_addr[2], bd_addr[3],
+                          bd_addr[4], bd_addr[5]);
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+
+}
+
+#if AVDT_REPORTING == TRUE
+/*******************************************************************************
+**
+** Function         bta_av_a2dp_report_cback
+**
+** Description      A2DP report callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_a2dp_report_cback(UINT8 handle, AVDT_REPORT_TYPE type,
+                                    tAVDT_REPORT_DATA *p_data)
+{
+    /* Do not need to handle report data for now.
+     * This empty function is here for conformance reasons. */
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_api_register
+**
+** Description      allocate stream control block,
+**                  register the service to stack
+**                  create SDP record
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_api_register(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_REGISTER    registr;
+    tBTA_AV_SCB         *p_scb;    /* stream control block */
+    tAVDT_REG       reg;
+    tAVDT_CS        cs;
+    char            *p_service_name;
+    tBTA_AV_CODEC   codec_type;
+    tBTA_UTL_COD    cod;
+    UINT8           index = 0;
+
+    memset(&cs,0,sizeof(tAVDT_CS));
+
+    registr.status = BTA_AV_FAIL_RESOURCES;
+    registr.app_id = p_data->api_reg.app_id;
+    registr.chnl   = (tBTA_AV_CHNL)p_data->hdr.layer_specific;
+    do
+    {
+        p_scb = bta_av_alloc_scb(registr.chnl);
+        if(p_scb == NULL)
+        {
+            APPL_TRACE_ERROR0("failed to alloc SCB");
+            break;
+        }
+
+        registr.hndl    = p_scb->hndl;
+        p_scb->app_id   = registr.app_id;
+
+        /* initialize the stream control block */
+        p_scb->timer.p_cback = (TIMER_CBACK*)&bta_av_timer_cback;
+        registr.status = BTA_AV_SUCCESS;
+
+        if((bta_av_cb.reg_audio + bta_av_cb.reg_video) == 0)
+        {
+            /* the first channel registered. register to AVDTP */
+            reg.ctrl_mtu = p_bta_av_cfg->sig_mtu;
+            reg.ret_tout = BTA_AV_RET_TOUT;
+            reg.sig_tout = BTA_AV_SIG_TOUT;
+            reg.idle_tout = BTA_AV_IDLE_TOUT;
+            reg.sec_mask = bta_av_cb.sec_mask;
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+            bta_ar_reg_avdt(&reg, bta_av_conn_cback, BTA_ID_AV);
+#endif
+            bta_sys_role_chg_register(&bta_av_sys_rs_cback);
+
+            /* create remote control TG service if required */
+            if (bta_av_cb.features & (BTA_AV_FEAT_RCTG))
+            {
+                /* register with no authorization; let AVDTP use authorization instead */
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#if (BTA_AV_WITH_AVCTP_AUTHORIZATION == TRUE)
+                bta_ar_reg_avct(p_bta_av_cfg->avrc_mtu, p_bta_av_cfg->avrc_br_mtu,
+                                bta_av_cb.sec_mask, BTA_ID_AV);
+#else
+                bta_ar_reg_avct(p_bta_av_cfg->avrc_mtu, p_bta_av_cfg->avrc_br_mtu,
+                                (UINT8)(bta_av_cb.sec_mask & (~BTA_SEC_AUTHORIZE)), BTA_ID_AV);
+#endif
+
+                bta_ar_reg_avrc(UUID_SERVCLASS_AV_REM_CTRL_TARGET, "AV Remote Control Target", NULL,
+                                p_bta_av_cfg->avrc_tg_cat, BTA_ID_AV);
+#endif
+            }
+
+            /* Set the Capturing service class bit */
+            cod.service = BTM_COD_SERVICE_CAPTURING;
+            utl_set_device_class(&cod, BTA_UTL_SET_COD_SERVICE_CLASS);
+        } /* if 1st channel */
+
+        /* get stream configuration and create stream */
+        /* memset(&cs.cfg,0,sizeof(tAVDT_CFG)); */
+        cs.cfg.num_codec = 1;
+        cs.tsep = AVDT_TSEP_SRC;
+
+        /*
+         * memset of cs takes care setting call back pointers to null.
+        cs.p_data_cback = NULL;
+        cs.p_report_cback = NULL;
+        */
+        cs.nsc_mask = AVDT_NSC_RECONFIG |
+              ((bta_av_cb.features & BTA_AV_FEAT_PROTECT) ? 0 : AVDT_NSC_SECURITY);
+        APPL_TRACE_DEBUG1("nsc_mask: 0x%x", cs.nsc_mask);
+
+        if (p_data->api_reg.p_service_name[0] == 0)
+        {
+            p_service_name = NULL;
+        }
+        else
+        {
+            p_service_name = p_data->api_reg.p_service_name;
+        }
+
+        p_scb->suspend_sup  = TRUE;
+        p_scb->recfg_sup    = TRUE;
+
+        cs.p_ctrl_cback  = bta_av_dt_cback[p_scb->hdi];
+        if(registr.chnl == BTA_AV_CHNL_AUDIO)
+        {
+            /* set up the audio stream control block */
+            p_scb->p_act_tbl = (const tBTA_AV_ACT *)bta_av_a2d_action;
+            p_scb->p_cos     = &bta_av_a2d_cos;
+            p_scb->media_type= AVDT_MEDIA_AUDIO;
+            cs.cfg.psc_mask  = AVDT_PSC_TRANS;
+            cs.media_type    = AVDT_MEDIA_AUDIO;
+            cs.mtu           = p_bta_av_cfg->audio_mtu;
+            cs.flush_to      = L2CAP_DEFAULT_FLUSH_TO;
+#if AVDT_REPORTING == TRUE
+            if(bta_av_cb.features & BTA_AV_FEAT_REPORT)
+            {
+                cs.cfg.psc_mask |= AVDT_PSC_REPORT;
+                cs.p_report_cback = bta_av_a2dp_report_cback;
+#if AVDT_MULTIPLEXING == TRUE
+                cs.cfg.mux_tsid_report = 2;
+#endif
+            }
+#endif
+            if(bta_av_cb.features & BTA_AV_FEAT_DELAY_RPT)
+                cs.cfg.psc_mask |= AVDT_PSC_DELAY_RPT;
+
+            /* keep the configuration in the stream control block */
+            memcpy(&p_scb->cfg, &cs.cfg, sizeof(tAVDT_CFG));
+            while(index < BTA_AV_MAX_SEPS &&
+                (*bta_av_a2d_cos.init)(&codec_type, cs.cfg.codec_info,
+                &cs.cfg.num_protect, cs.cfg.protect_info, index) == TRUE)
+            {
+                if(AVDT_CreateStream(&p_scb->seps[index].av_handle, &cs) == AVDT_SUCCESS)
+                {
+                    p_scb->seps[index].codec_type = codec_type;
+                    APPL_TRACE_DEBUG3("audio[%d] av_handle: %d codec_type: %d",
+                        index, p_scb->seps[index].av_handle, p_scb->seps[index].codec_type);
+                    index++;
+                }
+                else
+                    break;
+            }
+
+            if(!bta_av_cb.reg_audio)
+            {
+                /* create the SDP records on the 1st audio channel */
+                bta_av_cb.sdp_a2d_handle = SDP_CreateRecord();
+                A2D_AddRecord(UUID_SERVCLASS_AUDIO_SOURCE, p_service_name, NULL,
+                                  A2D_SUPF_PLAYER, bta_av_cb.sdp_a2d_handle);
+                bta_sys_add_uuid(UUID_SERVCLASS_AUDIO_SOURCE);
+
+                /* start listening when A2DP is registered */
+                if (bta_av_cb.features & BTA_AV_FEAT_RCTG)
+                    bta_av_rc_create(&bta_av_cb, AVCT_ACP, 0, BTA_AV_NUM_LINKS + 1);
+
+                /* if the AV and AVK are both supported, it cannot support the CT role */
+                if (bta_av_cb.features & (BTA_AV_FEAT_RCCT))
+                {
+                    /* if TG is not supported, we need to register to AVCT now */
+                    if ((bta_av_cb.features & (BTA_AV_FEAT_RCTG)) == 0)
+                    {
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#if (BTA_AV_WITH_AVCTP_AUTHORIZATION == TRUE)
+                        bta_ar_reg_avct(p_bta_av_cfg->avrc_mtu, p_bta_av_cfg->avrc_br_mtu,
+                                        bta_av_cb.sec_mask, BTA_ID_AV);
+#else
+                        bta_ar_reg_avct(p_bta_av_cfg->avrc_mtu, p_bta_av_cfg->avrc_br_mtu,
+                                        (UINT8)(bta_av_cb.sec_mask & (~BTA_SEC_AUTHORIZE)), BTA_ID_AV);
+#endif
+#endif
+                    }
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+                    /* create an SDP record as AVRC CT. */
+                    bta_ar_reg_avrc(UUID_SERVCLASS_AV_REMOTE_CONTROL, NULL, NULL,
+                           p_bta_av_cfg->avrc_ct_cat, BTA_ID_AV);
+#endif
+                }
+            }
+            bta_av_cb.reg_audio |= BTA_AV_HNDL_TO_MSK(p_scb->hdi);
+            APPL_TRACE_DEBUG1("reg_audio: 0x%x",bta_av_cb.reg_audio);
+        }
+        else
+        {
+            bta_av_cb.reg_video = BTA_AV_HNDL_TO_MSK(p_scb->hdi);
+            bta_av_cb.sdp_vdp_handle = SDP_CreateRecord();
+            /* register the video channel */
+            /* no need to verify the function pointer here. it's verified prior */
+            (*p_bta_av_cfg->p_reg)(&cs, p_service_name, p_scb);
+        }
+    } while (0);
+
+    /* call callback with register event */
+    (*bta_av_cb.p_cback)(BTA_AV_REGISTER_EVT, (tBTA_AV *)&registr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_api_deregister
+**
+** Description      de-register a channel
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_api_deregister(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SCB *p_scb = bta_av_hndl_to_scb(p_data->hdr.layer_specific);
+
+    if(p_scb)
+    {
+        p_scb->deregistring = TRUE;
+        bta_av_ssm_execute(p_scb, BTA_AV_API_CLOSE_EVT, p_data);
+    }
+    else
+    {
+        bta_av_dereg_comp(p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_ci_data
+**
+** Description      forward the BTA_AV_CI_SRC_DATA_READY_EVT to stream state machine
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_ci_data(tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SCB *p_scb;
+    int     i;
+    UINT8   chnl = (UINT8)p_data->hdr.layer_specific;
+
+    for( i=0; i < BTA_AV_NUM_STRS; i++ )
+    {
+        p_scb = bta_av_cb.p_scb[i];
+
+        if(p_scb && p_scb->chnl == chnl)
+        {
+            bta_av_ssm_execute(p_scb, BTA_AV_SRC_DATA_READY_EVT, p_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_rpc_conn
+**
+** Description      report report channel open
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (AVDT_REPORTING == TRUE)
+
+static void bta_av_rpc_conn(tBTA_AV_DATA *p_data)
+{
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_api_to_ssm
+**
+** Description      forward the API request to stream state machine
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_api_to_ssm(tBTA_AV_DATA *p_data)
+{
+    int xx;
+    UINT16 event = p_data->hdr.event - BTA_AV_FIRST_A2S_API_EVT + BTA_AV_FIRST_A2S_SSM_EVT;
+
+    for(xx=0; xx<BTA_AV_NUM_STRS; xx++)
+    {
+        bta_av_ssm_execute(bta_av_cb.p_scb[xx], event, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_chk_start
+**
+** Description      if this is audio channel, check if more than one audio
+**                  channel is connected & already started.
+**
+** Returns          TRUE, if need api_start
+**
+*******************************************************************************/
+BOOLEAN bta_av_chk_start(tBTA_AV_SCB *p_scb)
+{
+    BOOLEAN start = FALSE;
+    tBTA_AV_SCB *p_scbi;
+    int i;
+
+    if(p_scb->chnl == BTA_AV_CHNL_AUDIO)
+    {
+        if ((bta_av_cb.audio_open_cnt >= 2) &&
+            ((0 == (p_scb->role & BTA_AV_ROLE_AD_ACP)) ||       /* Outgoing connection or   */
+             (bta_av_cb.features & BTA_AV_FEAT_ACP_START)))     /* auto-starting option     */
+        {
+            /* more than one audio channel is connected */
+            /* if this is the 2nd stream as ACP, give INT a chance to issue the START command */
+            for(i=0; i<BTA_AV_NUM_STRS; i++)
+            {
+                p_scbi = bta_av_cb.p_scb[i];
+                if(p_scbi && p_scbi->chnl == BTA_AV_CHNL_AUDIO && p_scbi->co_started)
+                {
+                    start = TRUE;
+                    /* may need to update the flush timeout of this already started stream */
+                    if(p_scbi->co_started != bta_av_cb.audio_open_cnt)
+                    {
+                        p_scbi->co_started = bta_av_cb.audio_open_cnt;
+                        L2CA_SetFlushTimeout(p_scbi->peer_addr, p_bta_av_cfg->p_audio_flush_to[p_scbi->co_started - 1] );
+                    }
+                }
+            }
+        }
+    }
+    return start;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_restore_switch
+**
+** Description      assume that the caller of this function already makes
+**                  sure that there's only one ACL connection left
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_restore_switch (void)
+{
+    tBTA_AV_CB   *p_cb = &bta_av_cb;
+    int     i;
+    UINT8   mask;
+
+    APPL_TRACE_DEBUG1("reg_audio: 0x%x",bta_av_cb.reg_audio);
+    for(i=0; i<BTA_AV_NUM_STRS; i++)
+    {
+        mask = BTA_AV_HNDL_TO_MSK(i);
+        if (p_cb->conn_audio == mask)
+        {
+            if (p_cb->p_scb[i])
+            {
+                bta_sys_set_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH, p_cb->p_scb[i]->peer_addr);
+            }
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sys_rs_cback
+**
+** Description      Receives the role change event from dm
+**
+** Returns          (BTA_SYS_ROLE_CHANGE, new_role, hci_status, p_bda)
+**
+*******************************************************************************/
+static void bta_av_sys_rs_cback (tBTA_SYS_CONN_STATUS status,UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    int         i;
+    tBTA_AV_SCB *p_scb;
+    tBTA_AV_ROLE_RES  *p_buf;
+    UINT8       cur_role;
+    UINT8       peer_idx = 0;
+
+    APPL_TRACE_DEBUG1("bta_av_sys_rs_cback: %d", bta_av_cb.rs_idx);
+    for(i=0; i<BTA_AV_NUM_STRS; i++)
+    {
+        /* loop through all the SCBs to find matching peer addresses and report the role change event */
+        /* note that more than one SCB (a2dp & vdp) maybe waiting for this event */
+        p_scb = bta_av_cb.p_scb[i];
+        if (p_scb && (bdcmp (peer_addr, p_scb->peer_addr) == 0) &&
+            (p_buf = (tBTA_AV_ROLE_RES *) GKI_getbuf(sizeof(tBTA_AV_ROLE_RES))) != NULL)
+        {
+            APPL_TRACE_DEBUG3("new_role:%d, hci_status:x%x hndl: x%x", id, app_id, p_scb->hndl);
+            /*
+            if ((id != BTM_ROLE_MASTER) && (app_id != HCI_SUCCESS))
+            {
+                bta_sys_set_policy(BTA_ID_AV, (HCI_ENABLE_MASTER_SLAVE_SWITCH|HCI_ENABLE_SNIFF_MODE), p_scb->peer_addr);
+            }
+            */
+            p_buf->hdr.event = BTA_AV_ROLE_CHANGE_EVT;
+            p_buf->hdr.layer_specific = p_scb->hndl;
+            p_buf->new_role = id;
+            p_buf->hci_status = app_id;
+            bta_sys_sendmsg(p_buf);
+
+            peer_idx = p_scb->hdi + 1;  /* Handle index for the peer_addr */
+        }
+    }
+
+    /* restore role switch policy, if role switch failed */
+    if ((HCI_SUCCESS != app_id) &&
+        (BTM_GetRole (peer_addr, &cur_role) == BTM_SUCCESS) &&
+        (cur_role == BTM_ROLE_SLAVE) )
+    {
+        bta_sys_set_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH, peer_addr);
+    }
+
+    /* if BTA_AvOpen() was called for other device, which caused the role switch of the peer_addr,  */
+    /* we need to continue opening process for the BTA_AvOpen().                                    */
+    if ((bta_av_cb.rs_idx != 0) && (bta_av_cb.rs_idx != peer_idx))
+    {
+        p_scb = bta_av_cb.p_scb[bta_av_cb.rs_idx - 1];
+        if (p_scb && p_scb->q_tag == BTA_AV_Q_TAG_OPEN)
+        {
+            APPL_TRACE_DEBUG3 ("bta_av_sys_rs_cback: rs_idx(%d), hndl:x%x q_tag: %d",
+                bta_av_cb.rs_idx, p_scb->hndl, p_scb->q_tag);
+
+            if(HCI_SUCCESS == app_id || HCI_ERR_NO_CONNECTION == app_id)
+                p_scb->q_info.open.switch_res = BTA_AV_RS_OK;
+            else
+                p_scb->q_info.open.switch_res = BTA_AV_RS_FAIL;
+
+            /* Continue av open process */
+            bta_av_do_disc_a2d (p_scb, (tBTA_AV_DATA *)&(p_scb->q_info.open));
+        }
+
+        bta_av_cb.rs_idx = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sco_chg_cback
+**
+** Description      receive & process the SCO connection up/down event from sys.
+**                  call setup also triggers this callback, to suspend av before sco
+**                  activity happens, or to resume av once call ends.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_av_sco_chg_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8
+                                 app_id, BD_ADDR peer_addr)
+{
+    tBTA_AV_SCB *p_scb;
+    int     i;
+    tBTA_AV_API_STOP stop;
+
+    APPL_TRACE_DEBUG2("bta_av_sco_chg_cback:%d status:%d", id, status);
+    if(id)
+    {
+        bta_av_cb.sco_occupied = TRUE;
+
+        /* either BTA_SYS_SCO_OPEN or BTA_SYS_SCO_CLOSE with remaining active SCO */
+        for(i=0; i<BTA_AV_NUM_STRS; i++)
+        {
+            p_scb = bta_av_cb.p_scb[i];
+
+            if( p_scb && p_scb->co_started && (p_scb->sco_suspend == FALSE))
+            {
+                APPL_TRACE_DEBUG1("suspending scb:%d", i);
+                /* scb is used and started, not suspended automatically */
+                p_scb->sco_suspend = TRUE;
+                stop.flush   = FALSE;
+                stop.suspend = TRUE;
+                bta_av_ssm_execute(p_scb, BTA_AV_AP_STOP_EVT, (tBTA_AV_DATA *)&stop);
+            }
+        }
+    }
+    else
+    {
+        bta_av_cb.sco_occupied = FALSE;
+
+        for(i=0; i<BTA_AV_NUM_STRS; i++)
+        {
+            p_scb = bta_av_cb.p_scb[i];
+
+            if( p_scb && p_scb->sco_suspend ) /* scb is used and suspended for SCO */
+            {
+                APPL_TRACE_DEBUG1("starting scb:%d", i);
+                bta_av_ssm_execute(p_scb, BTA_AV_AP_START_EVT, NULL);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_switch_if_needed
+**
+** Description      This function checks if there is another existing AV
+**                  channel that is local as slave role.
+**                  If so, role switch and remove it from link policy.
+**
+** Returns          TRUE, if role switch is done
+**
+*******************************************************************************/
+BOOLEAN bta_av_switch_if_needed(tBTA_AV_SCB *p_scb)
+{
+    UINT8 role;
+    BOOLEAN needed = FALSE;
+    tBTA_AV_SCB *p_scbi;
+    int i;
+    UINT8       mask;
+
+    for(i=0; i<BTA_AV_NUM_STRS; i++)
+    {
+        mask = BTA_AV_HNDL_TO_MSK(i);
+        p_scbi = bta_av_cb.p_scb[i];
+        if( p_scbi && (p_scb->hdi != i) && /* not the original channel */
+            ((bta_av_cb.conn_audio & mask) ||/* connected audio */
+            (bta_av_cb.conn_video & mask)) ) /* connected video */
+        {
+            BTM_GetRole(p_scbi->peer_addr, &role);
+            /* this channel is open - clear the role switch link policy for this link */
+            if(BTM_ROLE_MASTER != role)
+            {
+                if (bta_av_cb.features & BTA_AV_FEAT_MASTER)
+                    bta_sys_clear_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH, p_scbi->peer_addr);
+                if (BTM_CMD_STARTED != BTM_SwitchRole(p_scbi->peer_addr, BTM_ROLE_MASTER, NULL))
+                {
+                    /* can not switch role on SCBI
+                     * start the timer on SCB - because this function is ONLY called when SCB gets API_OPEN */
+                    bta_sys_start_timer(&p_scb->timer, BTA_AV_AVRC_TIMER_EVT, BTA_AV_RS_TIME_VAL);
+                }
+                needed = TRUE;
+                /* mark the original channel as waiting for RS result */
+                bta_av_cb.rs_idx = p_scb->hdi + 1;
+                break;
+            }
+        }
+    }
+    return needed;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_link_role_ok
+**
+** Description      This function checks if the SCB has existing ACL connection
+**                  If so, check if the link role fits the requirements.
+**
+** Returns          TRUE, if role is ok
+**
+*******************************************************************************/
+BOOLEAN bta_av_link_role_ok(tBTA_AV_SCB *p_scb, UINT8 bits)
+{
+    UINT8 role;
+    BOOLEAN is_ok = TRUE;
+    BOOLEAN need_timer = FALSE;
+
+    if (BTM_GetRole(p_scb->peer_addr, &role) == BTM_SUCCESS)
+    {
+        APPL_TRACE_ERROR5("bta_av_link_role_ok hndl:x%x role:%d, conn_audio:x%x, bits:%d, features:x%x", p_scb->hndl, role, bta_av_cb.conn_audio, bits, bta_av_cb.features);
+        if (BTM_ROLE_MASTER != role && (A2D_BitsSet(bta_av_cb.conn_audio) > bits || (bta_av_cb.features & BTA_AV_FEAT_MASTER)))
+        {
+            if (bta_av_cb.features & BTA_AV_FEAT_MASTER)
+                bta_sys_clear_policy(BTA_ID_AV, HCI_ENABLE_MASTER_SLAVE_SWITCH, p_scb->peer_addr);
+
+            if (BTM_CMD_STARTED != BTM_SwitchRole(p_scb->peer_addr, BTM_ROLE_MASTER, NULL))
+            {
+                /* can not switch role on SCB - start the timer on SCB */
+                need_timer = TRUE;
+            }
+            is_ok = FALSE;
+            p_scb->wait |= BTA_AV_WAIT_ROLE_SW_RES_START;
+
+        }
+    }
+
+    return is_ok;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_chk_mtu
+**
+** Description      if this is audio channel, check if more than one audio
+**                  channel is connected.
+**
+** Returns          The smallest mtu of the connected audio channels
+**
+*******************************************************************************/
+UINT16 bta_av_chk_mtu(tBTA_AV_SCB *p_scb, UINT16 mtu)
+{
+    UINT16 ret_mtu = BTA_AV_MAX_A2DP_MTU;
+    tBTA_AV_SCB *p_scbi;
+    int i;
+    UINT8   mask;
+
+    /* TODO_MV mess with the mtu according to the number of EDR/non-EDR headsets */
+    if(p_scb->chnl == BTA_AV_CHNL_AUDIO)
+    {
+        if(bta_av_cb.audio_open_cnt >= 2)
+        {
+            /* more than one audio channel is connected */
+            for(i=0; i<BTA_AV_NUM_STRS; i++)
+            {
+                p_scbi = bta_av_cb.p_scb[i];
+                if((p_scb != p_scbi) && p_scbi && (p_scbi->chnl == BTA_AV_CHNL_AUDIO) )
+                {
+                    mask = BTA_AV_HNDL_TO_MSK(i);
+                    APPL_TRACE_DEBUG3("[%d] mtu: %d, mask:0x%x",
+                        i, p_scbi->stream_mtu, mask);
+                    if(bta_av_cb.conn_audio & mask)
+                    {
+                        if(ret_mtu > p_scbi->stream_mtu)
+                            ret_mtu = p_scbi->stream_mtu;
+                    }
+                }
+            }
+        }
+        APPL_TRACE_DEBUG3("bta_av_chk_mtu audio count:%d, conn_audio:0x%x, ret:%d",
+            bta_av_cb.audio_open_cnt, bta_av_cb.conn_audio, ret_mtu);
+    }
+    return ret_mtu;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_dup_audio_buf
+**
+** Description      dup the audio data to the q_info.a2d of other audio channels
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_dup_audio_buf(tBTA_AV_SCB *p_scb, BT_HDR *p_buf)
+{
+    tBTA_AV_SCB *p_scbi;
+    BUFFER_Q    *pq;
+    int     i;
+    UINT16  size, copy_size;
+    BT_HDR *p_new;
+
+    if(!p_buf)
+        return;
+
+    if(bta_av_cb.audio_open_cnt >= 2)
+    {
+        size = GKI_get_buf_size(p_buf);
+        copy_size = BT_HDR_SIZE + p_buf->len + p_buf->offset;
+        /* more than one audio channel is connected */
+        for(i=0; i<BTA_AV_NUM_STRS; i++)
+        {
+            p_scbi = bta_av_cb.p_scb[i];
+            if( (p_scb->hdi != i) && /* not the original channel */
+                (bta_av_cb.conn_audio & BTA_AV_HNDL_TO_MSK(i)) && /* connected audio */
+                p_scbi && p_scbi->co_started ) /* scb is used and started */
+            {
+                /* enqueue the data only when the stream is started */
+                p_new = (BT_HDR *)GKI_getbuf(size);
+                if(p_new)
+                {
+                    memcpy(p_new, p_buf, copy_size);
+                    pq = &p_scbi->q_info.a2d;
+                    GKI_enqueue(pq, p_new);
+                    if(pq->count > p_bta_av_cfg->audio_mqs)
+                    {
+                        bta_av_co_audio_drop(p_scbi->hndl);
+                        GKI_freebuf(GKI_dequeue(pq));
+                    }
+                }
+            }
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sm_execute
+**
+** Description      State machine event handling function for AV
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_sm_execute(tBTA_AV_CB *p_cb, UINT16 event, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_ST_TBL      state_table;
+    UINT8               action;
+
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+    APPL_TRACE_EVENT4("AV event=0x%x(%s) state=%d(%s)",
+        event, bta_av_evt_code(event), p_cb->state, bta_av_st_code(p_cb->state));
+#else
+    APPL_TRACE_EVENT2("AV event=0x%x state=%d", event, p_cb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = bta_av_st_tbl[p_cb->state];
+
+    event &= 0x00FF;
+
+    /* set next state */
+    p_cb->state = state_table[event][BTA_AV_NEXT_STATE];
+    APPL_TRACE_EVENT1("next state=%d", p_cb->state);
+
+    /* execute action functions */
+    if ((action = state_table[event][BTA_AV_ACTION_COL]) != BTA_AV_IGNORE)
+    {
+        (*bta_av_action[action])(p_cb, p_data);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_av_hdl_event
+**
+** Description      Advanced audio/video main event handling function.
+**
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN bta_av_hdl_event(BT_HDR *p_msg)
+{
+    UINT16 event = p_msg->event;
+    UINT16 first_event = BTA_AV_FIRST_NSM_EVT;
+
+    if (event > BTA_AV_LAST_EVT)
+    {
+        return TRUE; /* to free p_msg */
+    }
+
+    if(event >= first_event)
+    {
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+        APPL_TRACE_EVENT2("AV nsm event=0x%x(%s)", event, bta_av_evt_code(event));
+#else
+        APPL_TRACE_EVENT1("AV nsm event=0x%x", event);
+#endif
+        /* non state machine events */
+        (*bta_av_nsm_act[event - BTA_AV_FIRST_NSM_EVT]) ((tBTA_AV_DATA *) p_msg);
+    }
+    else if (event >= BTA_AV_FIRST_SM_EVT && event <= BTA_AV_LAST_SM_EVT)
+    {
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+        APPL_TRACE_EVENT2("AV sm event=0x%x(%s)", event, bta_av_evt_code(event));
+#else
+        APPL_TRACE_EVENT1("AV sm event=0x%x", event);
+#endif
+        /* state machine events */
+        bta_av_sm_execute(&bta_av_cb, p_msg->event, (tBTA_AV_DATA *) p_msg);
+    }
+    else
+    {
+        APPL_TRACE_EVENT1("handle=0x%x", p_msg->layer_specific);
+        /* stream state machine events */
+        bta_av_ssm_execute( bta_av_hndl_to_scb(p_msg->layer_specific),
+                                p_msg->event, (tBTA_AV_DATA *) p_msg);
+    }
+    return TRUE;
+}
+
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+/*******************************************************************************
+**
+** Function         bta_av_st_code
+**
+** Description
+**
+** Returns          char *
+**
+*******************************************************************************/
+static char *bta_av_st_code(UINT8 state)
+{
+    switch(state)
+    {
+    case BTA_AV_INIT_ST: return "INIT";
+    case BTA_AV_OPEN_ST: return "OPEN";
+    default:             return "unknown";
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_av_evt_code
+**
+** Description
+**
+** Returns          char *
+**
+*******************************************************************************/
+char *bta_av_evt_code(UINT16 evt_code)
+{
+    switch(evt_code)
+    {
+    case BTA_AV_API_DISABLE_EVT: return "API_DISABLE";
+    case BTA_AV_API_REMOTE_CMD_EVT: return "API_REMOTE_CMD";
+    case BTA_AV_API_VENDOR_CMD_EVT: return "API_VENDOR_CMD";
+    case BTA_AV_API_VENDOR_RSP_EVT: return "API_VENDOR_RSP";
+    case BTA_AV_API_META_RSP_EVT: return "API_META_RSP_EVT";
+    case BTA_AV_API_RC_CLOSE_EVT: return "API_RC_CLOSE";
+    case BTA_AV_AVRC_OPEN_EVT: return "AVRC_OPEN";
+    case BTA_AV_AVRC_MSG_EVT: return "AVRC_MSG";
+    case BTA_AV_AVRC_NONE_EVT: return "AVRC_NONE";
+
+    case BTA_AV_API_OPEN_EVT: return "API_OPEN";
+    case BTA_AV_API_CLOSE_EVT: return "API_CLOSE";
+    case BTA_AV_AP_START_EVT: return "AP_START";
+    case BTA_AV_AP_STOP_EVT: return "AP_STOP";
+    case BTA_AV_API_RECONFIG_EVT: return "API_RECONFIG";
+    case BTA_AV_API_PROTECT_REQ_EVT: return "API_PROTECT_REQ";
+    case BTA_AV_API_PROTECT_RSP_EVT: return "API_PROTECT_RSP";
+    case BTA_AV_API_RC_OPEN_EVT: return "API_RC_OPEN";
+    case BTA_AV_SRC_DATA_READY_EVT: return "SRC_DATA_READY";
+    case BTA_AV_CI_SETCONFIG_OK_EVT: return "CI_SETCONFIG_OK";
+    case BTA_AV_CI_SETCONFIG_FAIL_EVT: return "CI_SETCONFIG_FAIL";
+    case BTA_AV_SDP_DISC_OK_EVT: return "SDP_DISC_OK";
+    case BTA_AV_SDP_DISC_FAIL_EVT: return "SDP_DISC_FAIL";
+    case BTA_AV_STR_DISC_OK_EVT: return "STR_DISC_OK";
+    case BTA_AV_STR_DISC_FAIL_EVT: return "STR_DISC_FAIL";
+    case BTA_AV_STR_GETCAP_OK_EVT: return "STR_GETCAP_OK";
+    case BTA_AV_STR_GETCAP_FAIL_EVT: return "STR_GETCAP_FAIL";
+    case BTA_AV_STR_OPEN_OK_EVT: return "STR_OPEN_OK";
+    case BTA_AV_STR_OPEN_FAIL_EVT: return "STR_OPEN_FAIL";
+    case BTA_AV_STR_START_OK_EVT: return "STR_START_OK";
+    case BTA_AV_STR_START_FAIL_EVT: return "STR_START_FAIL";
+    case BTA_AV_STR_CLOSE_EVT: return "STR_CLOSE";
+    case BTA_AV_STR_CONFIG_IND_EVT: return "STR_CONFIG_IND";
+    case BTA_AV_STR_SECURITY_IND_EVT: return "STR_SECURITY_IND";
+    case BTA_AV_STR_SECURITY_CFM_EVT: return "STR_SECURITY_CFM";
+    case BTA_AV_STR_WRITE_CFM_EVT: return "STR_WRITE_CFM";
+    case BTA_AV_STR_SUSPEND_CFM_EVT: return "STR_SUSPEND_CFM";
+    case BTA_AV_STR_RECONFIG_CFM_EVT: return "STR_RECONFIG_CFM";
+    case BTA_AV_AVRC_TIMER_EVT: return "AVRC_TIMER";
+    case BTA_AV_AVDT_CONNECT_EVT: return "AVDT_CONNECT";
+    case BTA_AV_AVDT_DISCONNECT_EVT: return "AVDT_DISCONNECT";
+    case BTA_AV_ROLE_CHANGE_EVT: return "ROLE_CHANGE";
+    case BTA_AV_AVDT_DELAY_RPT_EVT: return "AVDT_DELAY_RPT";
+    case BTA_AV_ACP_CONNECT_EVT: return "ACP_CONNECT";
+
+    case BTA_AV_API_ENABLE_EVT: return "API_ENABLE";
+    case BTA_AV_API_REGISTER_EVT: return "API_REG";
+    case BTA_AV_API_DEREGISTER_EVT: return "API_DEREG";
+    case BTA_AV_API_DISCONNECT_EVT: return "API_DISCNT";
+    case BTA_AV_CI_SRC_DATA_READY_EVT: return "CI_DATA_READY";
+    case BTA_AV_SIG_CHG_EVT: return "SIG_CHG";
+    case BTA_AV_SIG_TIMER_EVT: return "SIG_TMR";
+    case BTA_AV_SDP_AVRC_DISC_EVT: return "SDP_AVRC_DISC";
+    case BTA_AV_AVRC_CLOSE_EVT: return "AVRC_CLOSE";
+    case BTA_AV_CONN_CHG_EVT: return "CONN_CHG";
+    case BTA_AV_DEREG_COMP_EVT: return "DEREG_COMP";
+#if (AVDT_REPORTING == TRUE)
+    case BTA_AV_AVDT_RPT_CONN_EVT: return "RPT_CONN";
+#endif
+    case BTA_AV_API_START_EVT: return "API_START";
+    case BTA_AV_API_STOP_EVT: return "API_STOP";
+    default:             return "unknown";
+    }
+}
+#endif
+
+#endif /* BTA_AV_INCLUDED */
diff --git a/bta/av/bta_av_sbc.c b/bta/av/bta_av_sbc.c
new file mode 100644
index 0000000..1517270
--- /dev/null
+++ b/bta/av/bta_av_sbc.c
@@ -0,0 +1,590 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains utility functions for dealing with SBC data frames
+ *  and codec capabilities.
+ *
+ ******************************************************************************/
+
+#include "a2d_api.h"
+#include "a2d_sbc.h"
+#include "bta_av_sbc.h"
+
+typedef int (tBTA_AV_SBC_ACT)(void *p_src, void *p_dst,
+                               UINT32 src_samples, UINT32 dst_samples,
+                               UINT32 *p_ret);
+
+typedef struct
+{
+    INT32               cur_pos;    /* current position */
+    UINT32              src_sps;    /* samples per second (source audio data) */
+    UINT32              dst_sps;    /* samples per second (converted audio data) */
+    tBTA_AV_SBC_ACT     *p_act;     /* the action function to do the conversion */
+    UINT16              bits;       /* number of bits per pcm sample */
+    UINT16              n_channels; /* number of channels (i.e. mono(1), stereo(2)...) */
+    INT16               worker1;
+    INT16               worker2;
+    UINT8               div;
+} tBTA_AV_SBC_UPS_CB;
+
+tBTA_AV_SBC_UPS_CB bta_av_sbc_ups_cb;
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_init_up_sample
+**
+** Description      initialize the up sample
+**
+**                  src_sps: samples per second (source audio data)
+**                  dst_sps: samples per second (converted audio data)
+**                  bits: number of bits per pcm sample
+**                  n_channels: number of channels (i.e. mono(1), stereo(2)...)
+**
+** Returns          none
+**
+*******************************************************************************/
+void bta_av_sbc_init_up_sample (UINT32 src_sps, UINT32 dst_sps, UINT16 bits, UINT16 n_channels)
+{
+    bta_av_sbc_ups_cb.cur_pos   = -1;
+    bta_av_sbc_ups_cb.src_sps   = src_sps;
+    bta_av_sbc_ups_cb.dst_sps   = dst_sps;
+    bta_av_sbc_ups_cb.bits      = bits;
+    bta_av_sbc_ups_cb.n_channels= n_channels;
+
+    if(n_channels == 1)
+    {
+        /* mono */
+        if(bits == 8)
+        {
+            bta_av_sbc_ups_cb.p_act = bta_av_sbc_up_sample_8m;
+            bta_av_sbc_ups_cb.div   = 1;
+        }
+        else
+        {
+            bta_av_sbc_ups_cb.p_act = bta_av_sbc_up_sample_16m;
+            bta_av_sbc_ups_cb.div   = 2;
+        }
+    }
+    else
+    {
+        /* stereo */
+        if(bits == 8)
+        {
+            bta_av_sbc_ups_cb.p_act = bta_av_sbc_up_sample_8s;
+            bta_av_sbc_ups_cb.div   = 2;
+        }
+        else
+        {
+            bta_av_sbc_ups_cb.p_act = bta_av_sbc_up_sample_16s;
+            bta_av_sbc_ups_cb.div   = 4;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (number of bytes)
+**                  dst_samples: The size of p_dst (number of bytes)
+**
+** Note:            An AE reported an issue with this function.
+**                  When called with bta_av_sbc_up_sample(src, uint8_array_dst..)
+**                  the byte before uint8_array_dst may get overwritten.
+**                  Using uint16_array_dst avoids the problem.
+**                  This issue is related to endian-ness and is hard to resolve
+**                  in a generic manner.
+** **************** Please use uint16 array as dst.
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+int bta_av_sbc_up_sample (void *p_src, void *p_dst,
+                         UINT32 src_samples, UINT32 dst_samples,
+                         UINT32 *p_ret)
+{
+    UINT32 src;
+    UINT32 dst;
+
+    if(bta_av_sbc_ups_cb.p_act)
+    {
+        src = src_samples/bta_av_sbc_ups_cb.div;
+        dst = dst_samples/bta_av_sbc_ups_cb.div;
+        return (*bta_av_sbc_ups_cb.p_act)(p_src, p_dst, src, dst, p_ret);
+    }
+    else
+    {
+        *p_ret = 0;
+        return 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_16s (16bits-stereo)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 4 bytes)
+**                  dst_samples: The size of p_dst (in uint of 4 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+int bta_av_sbc_up_sample_16s (void *p_src, void *p_dst,
+                         UINT32 src_samples, UINT32 dst_samples,
+                         UINT32 *p_ret)
+{
+    INT16   *p_src_tmp = (INT16 *)p_src;
+    INT16   *p_dst_tmp = (INT16 *)p_dst;
+    INT16   *p_worker1 = &bta_av_sbc_ups_cb.worker1;
+    INT16   *p_worker2 = &bta_av_sbc_ups_cb.worker2;
+    UINT32  src_sps = bta_av_sbc_ups_cb.src_sps;
+    UINT32  dst_sps = bta_av_sbc_ups_cb.dst_sps;
+
+    while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples)
+    {
+        *p_dst_tmp++    = *p_worker1;
+        *p_dst_tmp++    = *p_worker2;
+
+        bta_av_sbc_ups_cb.cur_pos -= src_sps;
+        dst_samples--;
+    }
+
+    bta_av_sbc_ups_cb.cur_pos = dst_sps;
+
+    while (src_samples-- && dst_samples)
+    {
+        *p_worker1 = *p_src_tmp++;
+        *p_worker2 = *p_src_tmp++;
+
+        do
+        {
+            *p_dst_tmp++    = *p_worker1;
+            *p_dst_tmp++    = *p_worker2;
+
+            bta_av_sbc_ups_cb.cur_pos -= src_sps;
+            dst_samples--;
+        } while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples);
+
+        bta_av_sbc_ups_cb.cur_pos += dst_sps;
+    }
+
+    if (bta_av_sbc_ups_cb.cur_pos == (INT32)dst_sps)
+        bta_av_sbc_ups_cb.cur_pos = 0;
+
+    *p_ret = ((char *)p_src_tmp - (char *)p_src);
+    return ((char *)p_dst_tmp - (char *)p_dst);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_16m (16bits-mono)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 2 bytes)
+**                  dst_samples: The size of p_dst (in uint of 2 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+int bta_av_sbc_up_sample_16m (void *p_src, void *p_dst,
+                              UINT32 src_samples, UINT32 dst_samples,
+                              UINT32 *p_ret)
+{
+    INT16   *p_src_tmp = (INT16 *)p_src;
+    INT16   *p_dst_tmp = (INT16 *)p_dst;
+    INT16   *p_worker = &bta_av_sbc_ups_cb.worker1;
+    UINT32  src_sps = bta_av_sbc_ups_cb.src_sps;
+    UINT32  dst_sps = bta_av_sbc_ups_cb.dst_sps;
+
+    while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples)
+    {
+        *p_dst_tmp++ = *p_worker;
+        *p_dst_tmp++ = *p_worker;
+
+        bta_av_sbc_ups_cb.cur_pos -= src_sps;
+        dst_samples--;
+        dst_samples--;
+    }
+
+
+    bta_av_sbc_ups_cb.cur_pos = dst_sps;
+
+    while (src_samples-- && dst_samples)
+    {
+        *p_worker = *p_src_tmp++;
+
+        do
+        {
+            *p_dst_tmp++ = *p_worker;
+            *p_dst_tmp++ = *p_worker;
+
+            bta_av_sbc_ups_cb.cur_pos -= src_sps;
+            dst_samples--;
+            dst_samples--;
+
+        } while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples);
+
+        bta_av_sbc_ups_cb.cur_pos += dst_sps;
+    }
+
+    if (bta_av_sbc_ups_cb.cur_pos == (INT32)dst_sps)
+        bta_av_sbc_ups_cb.cur_pos = 0;
+
+    *p_ret = ((char *)p_src_tmp - (char *)p_src);
+    return ((char *)p_dst_tmp - (char *)p_dst);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_8s (8bits-stereo)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 2 bytes)
+**                  dst_samples: The size of p_dst (in uint of 2 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+int bta_av_sbc_up_sample_8s (void *p_src, void *p_dst,
+                             UINT32 src_samples, UINT32 dst_samples,
+                             UINT32 *p_ret)
+{
+    UINT8   *p_src_tmp = (UINT8 *)p_src;
+    INT16   *p_dst_tmp = (INT16 *)p_dst;
+    INT16   *p_worker1 = &bta_av_sbc_ups_cb.worker1;
+    INT16   *p_worker2 = &bta_av_sbc_ups_cb.worker2;
+    UINT32  src_sps = bta_av_sbc_ups_cb.src_sps;
+    UINT32  dst_sps = bta_av_sbc_ups_cb.dst_sps;
+
+    while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples)
+    {
+        *p_dst_tmp++    = *p_worker1;
+        *p_dst_tmp++    = *p_worker2;
+
+        bta_av_sbc_ups_cb.cur_pos -= src_sps;
+        dst_samples--;
+        dst_samples--;
+    }
+
+    bta_av_sbc_ups_cb.cur_pos = dst_sps;
+
+    while (src_samples -- && dst_samples)
+    {
+        *p_worker1 = *(UINT8 *)p_src_tmp++;
+        *p_worker1 -= 0x80;
+        *p_worker1 <<= 8;
+        *p_worker2 = *(UINT8 *)p_src_tmp++;
+        *p_worker2 -= 0x80;
+        *p_worker2 <<= 8;
+
+        do
+        {
+            *p_dst_tmp++    = *p_worker1;
+            *p_dst_tmp++    = *p_worker2;
+
+            bta_av_sbc_ups_cb.cur_pos -= src_sps;
+            dst_samples--;
+            dst_samples--;
+        } while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples);
+
+        bta_av_sbc_ups_cb.cur_pos += dst_sps;
+    }
+
+    if (bta_av_sbc_ups_cb.cur_pos == (INT32)dst_sps)
+        bta_av_sbc_ups_cb.cur_pos = 0;
+
+    *p_ret = ((char *)p_src_tmp - (char *)p_src);
+    return ((char *)p_dst_tmp - (char *)p_dst);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_8m (8bits-mono)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (number of bytes)
+**                  dst_samples: The size of p_dst (number of bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+int bta_av_sbc_up_sample_8m (void *p_src, void *p_dst,
+                             UINT32 src_samples, UINT32 dst_samples,
+                             UINT32 *p_ret)
+{
+    UINT8   *p_src_tmp = (UINT8 *)p_src;
+    INT16   *p_dst_tmp = (INT16 *)p_dst;
+    INT16   *p_worker = &bta_av_sbc_ups_cb.worker1;
+    UINT32  src_sps = bta_av_sbc_ups_cb.src_sps;
+    UINT32  dst_sps = bta_av_sbc_ups_cb.dst_sps;
+
+    while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples)
+    {
+        *p_dst_tmp++ = *p_worker;
+        *p_dst_tmp++ = *p_worker;
+
+        bta_av_sbc_ups_cb.cur_pos -= src_sps;
+        dst_samples -= 4;
+    }
+
+
+    bta_av_sbc_ups_cb.cur_pos = dst_sps;
+
+    while (src_samples-- && dst_samples)
+    {
+        *p_worker = *(UINT8 *)p_src_tmp++;
+        *p_worker -= 0x80;
+        *p_worker <<= 8;
+
+        do
+        {
+            *p_dst_tmp++ = *p_worker;
+            *p_dst_tmp++ = *p_worker;
+
+            bta_av_sbc_ups_cb.cur_pos -= src_sps;
+            dst_samples -= 4;
+
+        } while (bta_av_sbc_ups_cb.cur_pos > 0 && dst_samples);
+
+        bta_av_sbc_ups_cb.cur_pos += dst_sps;
+    }
+
+    if (bta_av_sbc_ups_cb.cur_pos == (INT32)dst_sps)
+        bta_av_sbc_ups_cb.cur_pos = 0;
+
+    *p_ret = ((char *)p_src_tmp - (char *)p_src);
+    return ((char *)p_dst_tmp - (char *)p_dst);
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_cfg_for_cap
+**
+** Description      Determine the preferred SBC codec configuration for the
+**                  given codec capabilities.  The function is passed the
+**                  preferred codec configuration and the peer codec
+**                  capabilities for the stream.  The function attempts to
+**                  match the preferred capabilities with the configuration
+**                  as best it can.  The resulting codec configuration is
+**                  returned in the same memory used for the capabilities.
+**
+** Returns          0 if ok, nonzero if error.
+**                  Codec configuration in p_cap.
+**
+*******************************************************************************/
+UINT8 bta_av_sbc_cfg_for_cap(UINT8 *p_peer, tA2D_SBC_CIE *p_cap, tA2D_SBC_CIE *p_pref)
+{
+    UINT8           status = A2D_SUCCESS;
+    tA2D_SBC_CIE    peer_cie;
+
+    /* parse peer capabilities */
+    if ((status = A2D_ParsSbcInfo(&peer_cie, p_peer, TRUE)) != 0)
+    {
+        return status;
+    }
+
+    /* Check if the peer supports our channel mode */
+    if (peer_cie.ch_mode & p_pref->ch_mode)
+    {
+        peer_cie.ch_mode = p_pref->ch_mode;
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_av_sbc_cfg_for_cap: ch_mode(0x%02X) not supported", p_pref->ch_mode);
+        return A2D_FAIL;
+    }
+
+    /* Check if the peer supports our sampling freq */
+    if (peer_cie.samp_freq & p_pref->samp_freq)
+    {
+        peer_cie.samp_freq = p_pref->samp_freq;
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_av_sbc_cfg_for_cap: samp_freq(0x%02X) not supported", p_pref->samp_freq);
+        return A2D_FAIL;
+    }
+
+    /* Check if the peer supports our block len */
+    if (peer_cie.block_len & p_pref->block_len)
+    {
+        peer_cie.block_len = p_pref->block_len;
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_av_sbc_cfg_for_cap: block_len(0x%02X) not supported", p_pref->block_len);
+        return A2D_FAIL;
+    }
+
+    /* Check if the peer supports our num subbands */
+    if (peer_cie.num_subbands & p_pref->num_subbands)
+    {
+        peer_cie.num_subbands = p_pref->num_subbands;
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_av_sbc_cfg_for_cap: num_subbands(0x%02X) not supported", p_pref->num_subbands);
+        return A2D_FAIL;
+    }
+
+    /* Check if the peer supports our alloc method */
+    if (peer_cie.alloc_mthd & p_pref->alloc_mthd)
+    {
+        peer_cie.alloc_mthd = p_pref->alloc_mthd;
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_av_sbc_cfg_for_cap: alloc_mthd(0x%02X) not supported", p_pref->alloc_mthd);
+        return A2D_FAIL;
+    }
+
+    /* max bitpool */
+    if (p_pref->max_bitpool != 0 && p_pref->max_bitpool < peer_cie.max_bitpool)
+    {
+        peer_cie.max_bitpool = p_pref->max_bitpool;
+    }
+
+    /* min bitpool */
+    if (p_pref->min_bitpool != 0 && p_pref->min_bitpool > peer_cie.min_bitpool)
+    {
+        peer_cie.min_bitpool = p_pref->min_bitpool;
+    }
+
+    if (status == A2D_SUCCESS)
+    {
+        /* build configuration */
+        A2D_BldSbcInfo(A2D_MEDIA_TYPE_AUDIO, &peer_cie, p_peer);
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_cfg_in_cap
+**
+** Description      This function checks whether an SBC codec configuration
+**                  is allowable for the given codec capabilities.
+**
+** Returns          0 if ok, nonzero if error.
+**
+*******************************************************************************/
+UINT8 bta_av_sbc_cfg_in_cap(UINT8 *p_cfg, tA2D_SBC_CIE *p_cap)
+{
+    UINT8           status = 0;
+    tA2D_SBC_CIE    cfg_cie;
+
+    /* parse configuration */
+    if ((status = A2D_ParsSbcInfo(&cfg_cie, p_cfg, FALSE)) != 0)
+    {
+        return status;
+    }
+
+    /* verify that each parameter is in range */
+
+    /* sampling frequency */
+    if ((cfg_cie.samp_freq & p_cap->samp_freq) == 0)
+    {
+        status = A2D_NS_SAMP_FREQ;
+    }
+    /* channel mode */
+    else if ((cfg_cie.ch_mode & p_cap->ch_mode) == 0)
+    {
+        status = A2D_NS_CH_MODE;
+    }
+    /* block length */
+    else if ((cfg_cie.block_len & p_cap->block_len) == 0)
+    {
+        status = A2D_BAD_BLOCK_LEN;
+    }
+    /* subbands */
+    else if ((cfg_cie.num_subbands & p_cap->num_subbands) == 0)
+    {
+        status = A2D_NS_SUBBANDS;
+    }
+    /* allocation method */
+    else if ((cfg_cie.alloc_mthd & p_cap->alloc_mthd) == 0)
+    {
+        status = A2D_NS_ALLOC_MTHD;
+    }
+    /* max bitpool */
+    else if (cfg_cie.max_bitpool > p_cap->max_bitpool)
+    {
+        status = A2D_NS_MAX_BITPOOL;
+    }
+    /* min bitpool */
+    else if (cfg_cie.min_bitpool < p_cap->min_bitpool)
+    {
+        status = A2D_NS_MIN_BITPOOL;
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_bld_hdr
+**
+** Description      This function builds the packet header for MPF1.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_sbc_bld_hdr(BT_HDR *p_buf, UINT16 fr_per_pkt)
+{
+    UINT8   *p;
+
+    p_buf->offset -= BTA_AV_SBC_HDR_SIZE;
+    p = (UINT8 *) (p_buf + 1) + p_buf->offset;
+    p_buf->len += BTA_AV_SBC_HDR_SIZE;
+    A2D_BldSbcMplHdr(p, FALSE, FALSE, FALSE, (UINT8) fr_per_pkt);
+}
+
diff --git a/bta/av/bta_av_ssm.c b/bta/av/bta_av_ssm.c
new file mode 100644
index 0000000..a35a4b0
--- /dev/null
+++ b/bta/av/bta_av_ssm.c
@@ -0,0 +1,599 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the stream state machine for the BTA advanced audio/video.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#if defined(BTA_AV_INCLUDED) && (BTA_AV_INCLUDED == TRUE)
+
+#include <string.h>
+#include "bta_av_co.h"
+#include "bta_av_int.h"
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+/* state machine states */
+enum
+{
+    BTA_AV_INIT_SST,
+    BTA_AV_INCOMING_SST,
+    BTA_AV_OPENING_SST,
+    BTA_AV_OPEN_SST,
+    BTA_AV_RCFG_SST,
+    BTA_AV_CLOSING_SST
+};
+
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_AV_DO_DISC,
+    BTA_AV_CLEANUP,
+    BTA_AV_FREE_SDB,
+    BTA_AV_CONFIG_IND,
+    BTA_AV_DISCONNECT_REQ,
+    BTA_AV_SECURITY_REQ,
+    BTA_AV_SECURITY_RSP,
+    BTA_AV_SETCONFIG_RSP,
+    BTA_AV_ST_RC_TIMER,
+    BTA_AV_STR_OPENED,
+    BTA_AV_SECURITY_IND,
+    BTA_AV_SECURITY_CFM,
+    BTA_AV_DO_CLOSE,
+    BTA_AV_CONNECT_REQ,
+    BTA_AV_SDP_FAILED,
+    BTA_AV_DISC_RESULTS,
+    BTA_AV_DISC_RES_AS_ACP,
+    BTA_AV_OPEN_FAILED,
+    BTA_AV_GETCAP_RESULTS,
+    BTA_AV_SETCONFIG_REJ,
+    BTA_AV_DISCOVER_REQ,
+    BTA_AV_CONN_FAILED,
+    BTA_AV_DO_START,
+    BTA_AV_STR_STOPPED,
+    BTA_AV_RECONFIG,
+    BTA_AV_DATA_PATH,
+    BTA_AV_START_OK,
+    BTA_AV_START_FAILED,
+    BTA_AV_STR_CLOSED,
+    BTA_AV_CLR_CONG,
+    BTA_AV_SUSPEND_CFM,
+    BTA_AV_RCFG_STR_OK,
+    BTA_AV_RCFG_FAILED,
+    BTA_AV_RCFG_CONNECT,
+    BTA_AV_RCFG_DISCNTD,
+    BTA_AV_SUSPEND_CONT,
+    BTA_AV_RCFG_CFM,
+    BTA_AV_RCFG_OPEN,
+    BTA_AV_SECURITY_REJ,
+    BTA_AV_OPEN_RC,
+    BTA_AV_CHK_2ND_START,
+    BTA_AV_SAVE_CAPS,
+    BTA_AV_SET_USE_RC,
+    BTA_AV_CCO_CLOSE,
+    BTA_AV_SWITCH_ROLE,
+    BTA_AV_ROLE_RES,
+    BTA_AV_DELAY_CO,
+    BTA_AV_OPEN_AT_INC,
+    BTA_AV_NUM_SACTIONS
+};
+
+#define BTA_AV_SIGNORE       BTA_AV_NUM_SACTIONS
+
+
+/* state table information */
+/* #define BTA_AV_SACTION_COL           0       position of actions */
+#define BTA_AV_SACTIONS              2       /* number of actions */
+#define BTA_AV_SNEXT_STATE           2       /* position of next state */
+#define BTA_AV_NUM_COLS              3       /* number of columns in state tables */
+
+/* state table for init state */
+static const UINT8 bta_av_sst_init[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_DO_DISC,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_CLEANUP,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AP_START_EVT */          {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AP_STOP_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_START_OK_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_SETCONFIG_REJ,  BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST }
+};
+
+/* state table for incoming state */
+static const UINT8 bta_av_sst_incoming[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_OPEN_AT_INC,    BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_CCO_CLOSE,      BTA_AV_DISCONNECT_REQ, BTA_AV_CLOSING_SST },
+/* AP_START_EVT */          {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AP_STOP_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SECURITY_REQ,   BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SECURITY_RSP,   BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SETCONFIG_RSP,  BTA_AV_ST_RC_TIMER,    BTA_AV_INCOMING_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SETCONFIG_RSP,  BTA_AV_CLEANUP,        BTA_AV_INIT_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_DISC_RES_AS_ACP,BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_SAVE_CAPS,      BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_STR_OPENED,     BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_START_OK_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_CCO_CLOSE,      BTA_AV_CLEANUP,        BTA_AV_INIT_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_CONFIG_IND,     BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SECURITY_IND,   BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SECURITY_CFM,   BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_CCO_CLOSE,      BTA_AV_CLEANUP,        BTA_AV_INIT_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_DELAY_CO,       BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST }
+};
+
+/* state table for opening state */
+static const UINT8 bta_av_sst_opening[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_DO_CLOSE,       BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_START_EVT */          {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AP_STOP_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SECURITY_REQ,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SECURITY_RSP,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_CONNECT_REQ,    BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_CONNECT_REQ,    BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_DISC_RESULTS,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_OPEN_FAILED,    BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_GETCAP_RESULTS, BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_OPEN_FAILED,    BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_ST_RC_TIMER,    BTA_AV_STR_OPENED,     BTA_AV_OPEN_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_OPEN_FAILED,    BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_START_OK_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_CONFIG_IND,     BTA_AV_SIGNORE,        BTA_AV_INCOMING_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SECURITY_IND,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SECURITY_CFM,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_SWITCH_ROLE,    BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_DISCOVER_REQ,   BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_CONN_FAILED,    BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_ROLE_RES,       BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_DELAY_CO,       BTA_AV_SIGNORE,        BTA_AV_OPENING_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPENING_SST }
+};
+
+/* state table for open state */
+static const UINT8 bta_av_sst_open[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_DO_CLOSE,       BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_START_EVT */          {BTA_AV_DO_START,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* AP_STOP_EVT */           {BTA_AV_STR_STOPPED,    BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_RECONFIG,       BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SECURITY_REQ,   BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SECURITY_RSP,   BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SET_USE_RC,     BTA_AV_OPEN_RC,        BTA_AV_OPEN_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_DATA_PATH,      BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_SAVE_CAPS,      BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_START_OK_EVT */      {BTA_AV_START_OK,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_START_FAILED,   BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_STR_CLOSED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_SETCONFIG_REJ,  BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SECURITY_IND,   BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SECURITY_CFM,   BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_CLR_CONG,       BTA_AV_DATA_PATH,      BTA_AV_OPEN_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SUSPEND_CFM,    BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_OPEN_RC,        BTA_AV_CHK_2ND_START,  BTA_AV_OPEN_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_STR_CLOSED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_ROLE_RES,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_DELAY_CO,       BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_OPEN_SST }
+};
+
+/* state table for reconfig state */
+static const UINT8 bta_av_sst_rcfg[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_DISCONNECT_REQ, BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_START_EVT */          {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AP_STOP_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_FREE_SDB,       BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_DISC_RESULTS,   BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_STR_CLOSED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_GETCAP_RESULTS, BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_STR_CLOSED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_RCFG_STR_OK,    BTA_AV_SIGNORE,        BTA_AV_OPEN_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_RCFG_FAILED,    BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_START_OK_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_RCFG_CONNECT,   BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_SETCONFIG_REJ,  BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SUSPEND_CONT,   BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_RCFG_CFM,       BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_RCFG_OPEN,      BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_RCFG_DISCNTD,   BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_DELAY_CO,       BTA_AV_SIGNORE,        BTA_AV_RCFG_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_RCFG_SST }
+};
+
+/* state table for closing state */
+static const UINT8 bta_av_sst_closing[][BTA_AV_NUM_COLS] =
+{
+/* Event                     Action 1               Action 2               Next state */
+/* AP_OPEN_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_CLOSE_EVT */          {BTA_AV_DISCONNECT_REQ, BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_START_EVT */          {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AP_STOP_EVT */           {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* API_RECONFIG_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* API_PROTECT_REQ_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* API_PROTECT_RSP_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* API_RC_OPEN_EVT  */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* SRC_DATA_READY_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* CI_SETCONFIG_OK_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* CI_SETCONFIG_FAIL_EVT */ {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* SDP_DISC_OK_EVT */       {BTA_AV_SDP_FAILED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* SDP_DISC_FAIL_EVT */     {BTA_AV_SDP_FAILED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* STR_DISC_OK_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_DISC_FAIL_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_GETCAP_OK_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_GETCAP_FAIL_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_OPEN_OK_EVT */       {BTA_AV_DO_CLOSE,       BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_OPEN_FAIL_EVT */     {BTA_AV_DISCONNECT_REQ, BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_START_OK_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_START_FAIL_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_CLOSE_EVT */         {BTA_AV_DISCONNECT_REQ, BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_CONFIG_IND_EVT */    {BTA_AV_SETCONFIG_REJ,  BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_SECURITY_IND_EVT */  {BTA_AV_SECURITY_REJ,   BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_SECURITY_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_WRITE_CFM_EVT */     {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_SUSPEND_CFM_EVT */   {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* STR_RECONFIG_CFM_EVT */  {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AVRC_TIMER_EVT */        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AVDT_CONNECT_EVT */      {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AVDT_DISCONNECT_EVT */   {BTA_AV_STR_CLOSED,     BTA_AV_SIGNORE,        BTA_AV_INIT_SST },
+/* ROLE_CHANGE_EVT*/        {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* AVDT_DELAY_RPT_EVT */    {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST },
+/* ACP_CONNECT_EVT */       {BTA_AV_SIGNORE,        BTA_AV_SIGNORE,        BTA_AV_CLOSING_SST }
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_AV_SST_TBL)[BTA_AV_NUM_COLS];
+
+/* state table */
+static const tBTA_AV_SST_TBL bta_av_sst_tbl[] =
+{
+    bta_av_sst_init,
+    bta_av_sst_incoming,
+    bta_av_sst_opening,
+    bta_av_sst_open,
+    bta_av_sst_rcfg,
+    bta_av_sst_closing
+};
+
+
+
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+static char *bta_av_sst_code(UINT8 state);
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_is_rcfg_sst
+**
+** Description      Check if stream state machine is in reconfig state.
+**
+**
+** Returns          TRUE if stream state machine is in reconfig state.
+**
+*******************************************************************************/
+BOOLEAN bta_av_is_rcfg_sst (tBTA_AV_SCB *p_scb)
+{
+    BOOLEAN is_rcfg_sst = FALSE;
+
+    if (p_scb != NULL)
+    {
+        if (p_scb->state == BTA_AV_RCFG_SST)
+            is_rcfg_sst = TRUE;
+    }
+
+    return is_rcfg_sst;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_ssm_execute
+**
+** Description      Stream state machine event handling function for AV
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_av_ssm_execute(tBTA_AV_SCB *p_scb, UINT16 event, tBTA_AV_DATA *p_data)
+{
+    tBTA_AV_SST_TBL     state_table;
+    UINT8               action;
+    int                 i, xx;
+
+    if(p_scb == NULL)
+    {
+        /* this stream is not registered */
+        APPL_TRACE_EVENT0("AV channel not registered");
+        return;
+    }
+
+    /* In case incoming connection is for VDP, we need to swap scb.        */
+    /* When ACP_CONNECT_EVT was received, we put first available scb to    */
+    /* to Incoming state. Later, when STR_CONFIG_IND_EVT is coming, we     */
+    /* know if it is A2DP or VDP.                                          */
+    if ((p_scb->state == BTA_AV_INIT_SST) && (event == BTA_AV_STR_CONFIG_IND_EVT))
+    {
+        for (xx = 0; xx < BTA_AV_NUM_STRS; xx++)
+        {
+            if (bta_av_cb.p_scb[xx])
+            {
+                if (bta_av_cb.p_scb[xx]->state == BTA_AV_INCOMING_SST)
+                {
+                    bta_av_cb.p_scb[xx]->state = BTA_AV_INIT_SST;
+                    bta_av_cb.p_scb[xx]->coll_mask = 0;
+                    p_scb->state = BTA_AV_INCOMING_SST;
+                    break;
+                }
+            }
+        }
+    }
+
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+    APPL_TRACE_EVENT5("AV Sevent(0x%x)=0x%x(%s) state=%d(%s)",
+        p_scb->hndl, event, bta_av_evt_code(event), p_scb->state, bta_av_sst_code(p_scb->state));
+#else
+    APPL_TRACE_EVENT2("AV Sevent=0x%x state=%d", event, p_scb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = bta_av_sst_tbl[p_scb->state];
+
+    event -= BTA_AV_FIRST_SSM_EVT;
+
+    /* set next state */
+    p_scb->state = state_table[event][BTA_AV_SNEXT_STATE];
+
+    /* execute action functions */
+    for(i=0; i< BTA_AV_SACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_AV_SIGNORE)
+        {
+            (*p_scb->p_act_tbl[action])(p_scb, p_data);
+        }
+        else
+            break;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_is_scb_opening
+**
+** Description      Returns TRUE is scb is in opening state.
+**
+**
+** Returns          TRUE if scb is in opening state.
+**
+*******************************************************************************/
+BOOLEAN bta_av_is_scb_opening (tBTA_AV_SCB *p_scb)
+{
+    BOOLEAN is_opening = FALSE;
+
+    if (p_scb)
+    {
+        if (p_scb->state == BTA_AV_OPENING_SST)
+            is_opening = TRUE;
+    }
+
+    return is_opening;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_is_scb_incoming
+**
+** Description      Returns TRUE is scb is in incoming state.
+**
+**
+** Returns          TRUE if scb is in incoming state.
+**
+*******************************************************************************/
+BOOLEAN bta_av_is_scb_incoming (tBTA_AV_SCB *p_scb)
+{
+    BOOLEAN is_incoming = FALSE;
+
+    if (p_scb)
+    {
+        if (p_scb->state == BTA_AV_INCOMING_SST)
+            is_incoming = TRUE;
+    }
+
+    return is_incoming;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_set_scb_sst_init
+**
+** Description      Set SST state to INIT.
+**                  Use this function to change SST outside of state machine.
+**
+** Returns          None
+**
+*******************************************************************************/
+void bta_av_set_scb_sst_init (tBTA_AV_SCB *p_scb)
+{
+    if (p_scb)
+    {
+        p_scb->state = BTA_AV_INIT_SST;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_is_scb_init
+**
+** Description      Returns TRUE is scb is in init state.
+**
+**
+** Returns          TRUE if scb is in incoming state.
+**
+*******************************************************************************/
+BOOLEAN bta_av_is_scb_init (tBTA_AV_SCB *p_scb)
+{
+    BOOLEAN is_init = FALSE;
+
+    if (p_scb)
+    {
+        if (p_scb->state == BTA_AV_INIT_SST)
+            is_init = TRUE;
+    }
+
+    return is_init;
+}
+
+/*******************************************************************************
+**
+** Function         bta_av_set_scb_sst_incoming
+**
+** Description      Set SST state to incoming.
+**                  Use this function to change SST outside of state machine.
+**
+** Returns          None
+**
+*******************************************************************************/
+void bta_av_set_scb_sst_incoming (tBTA_AV_SCB *p_scb)
+{
+    if (p_scb)
+    {
+        p_scb->state = BTA_AV_INCOMING_SST;
+    }
+}
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if (defined(BTA_AV_DEBUG) && BTA_AV_DEBUG == TRUE)
+/*******************************************************************************
+**
+** Function         bta_av_sst_code
+**
+** Description
+**
+** Returns          char *
+**
+*******************************************************************************/
+static char *bta_av_sst_code(UINT8 state)
+{
+    switch(state)
+    {
+    case BTA_AV_INIT_SST: return "INIT";
+    case BTA_AV_INCOMING_SST: return "INCOMING";
+    case BTA_AV_OPENING_SST: return "OPENING";
+    case BTA_AV_OPEN_SST: return "OPEN";
+    case BTA_AV_RCFG_SST: return "RCFG";
+    case BTA_AV_CLOSING_SST: return "CLOSING";
+    default:             return "unknown";
+    }
+}
+
+#endif
+#endif /* BTA_AV_INCLUDED */
diff --git a/bta/dm/bta_dm_act.c b/bta/dm/bta_dm_act.c
new file mode 100644
index 0000000..29b4ec2
--- /dev/null
+++ b/bta/dm/bta_dm_act.c
@@ -0,0 +1,4886 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the action functions for device manager state
+ *  machine.
+ *
+ ******************************************************************************/
+
+#include "bt_types.h"
+#include "gki.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_dm_int.h"
+#include "bta_dm_co.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "btu.h"
+#include "sdp_api.h"
+#include "l2c_api.h"
+#include "wbt_api.h"
+#include "utl.h"
+#include <string.h>
+
+static void bta_dm_inq_results_cb (tBTM_INQ_RESULTS *p_inq, UINT8 *p_eir);
+static void bta_dm_inq_cmpl_cb (void * p_result);
+static void bta_dm_service_search_remname_cback (BD_ADDR bd_addr, DEV_CLASS dc, BD_NAME bd_name);
+static void bta_dm_remname_cback (tBTM_REMOTE_DEV_NAME *p_remote_name);
+static void bta_dm_find_services ( BD_ADDR bd_addr);
+static void bta_dm_discover_next_device(void);
+static void bta_dm_sdp_callback (UINT16 sdp_status);
+static UINT8 bta_dm_authorize_cback (BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name, UINT8 *service_name, UINT8 service_id, BOOLEAN is_originator);
+static UINT8 bta_dm_pin_cback (BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name);
+static UINT8 bta_dm_link_key_request_cback (BD_ADDR bd_addr, LINK_KEY key);
+static UINT8 bta_dm_new_link_key_cback(BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name, LINK_KEY key, UINT8 key_type);
+static UINT8 bta_dm_authentication_complete_cback(BD_ADDR bd_addr, DEV_CLASS dev_class,BD_NAME bd_name, int result);
+static void bta_dm_local_name_cback(BD_ADDR bd_addr);
+static BOOLEAN bta_dm_check_av(UINT16 event);
+#if (BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+static void bta_dm_bl_change_cback (tBTM_BL_EVENT_DATA *p_data);
+#else
+static void bta_dm_acl_change_cback (BD_ADDR p_bda, DEV_CLASS p_dc, BD_NAME p_bdn, BD_FEATURES features, BOOLEAN is_new);
+#endif
+static void bta_dm_policy_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+
+/* Extended Inquiry Response */
+static UINT8 bta_dm_sp_cback (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data);
+
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+static void bta_dm_set_eir (char *local_name);
+#endif /* BTM_EIR_SERVER_INCLUDED */
+
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+static void bta_dm_eir_search_services( tBTM_INQ_RESULTS  *p_result,
+                                        tBTA_SERVICE_MASK *p_services_to_search,
+                                        tBTA_SERVICE_MASK *p_services_found);
+#endif /* BTM_EIR_CLIENT_INCLUDED */
+
+static void bta_dm_rssi_cback (tBTM_RSSI_RESULTS *p_result);
+static void bta_dm_signal_strength_timer_cback (TIMER_LIST_ENT *p_tle);
+static void bta_dm_link_quality_cback (tBTM_LINK_QUALITY_RESULTS *p_result);
+static void bta_dm_search_timer_cback (TIMER_LIST_ENT *p_tle);
+static void bta_dm_disable_timer_cback (TIMER_LIST_ENT *p_tle);
+static void bta_dm_disable_conn_down_timer_cback (TIMER_LIST_ENT *p_tle);
+static void bta_dm_rm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+static void bta_dm_adjust_roles(BOOLEAN delay_role_switch);
+static char *bta_dm_get_remname(void);
+static void bta_dm_bond_cancel_complete_cback(tBTM_STATUS result);
+
+static BOOLEAN bta_dm_read_remote_device_name (BD_ADDR bd_addr);
+static void bta_dm_discover_device(BD_ADDR remote_bd_addr);
+
+static void bta_dm_sys_hw_cback( tBTA_SYS_HW_EVT status );
+
+static BOOLEAN bta_dm_dev_blacklisted_for_switch (BD_ADDR remote_bd_addr);
+static void bta_dm_delay_role_switch_cback (TIMER_LIST_ENT *p_tle);
+
+
+#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
+    #if ((defined SMP_INCLUDED) && (SMP_INCLUDED == TRUE))
+static UINT8 bta_dm_ble_smp_cback (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data);
+    #endif
+static void bta_dm_ble_id_key_cback (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
+    #if ((defined BTA_GATT_INCLUDED) &&  (BTA_GATT_INCLUDED == TRUE))
+static void btm_dm_start_gatt_discovery ( BD_ADDR bd_addr);
+static void bta_dm_cancel_gatt_discovery(BD_ADDR bd_addr);
+static void bta_dm_gattc_callback(tBTA_GATTC_EVT event, tBTA_GATTC *p_data);
+    #endif
+#endif
+
+extern void sdpu_uuid16_to_uuid128(UINT16 uuid16, UINT8* p_uuid128);
+
+const UINT16 bta_service_id_to_uuid_lkup_tbl [BTA_MAX_SERVICE_ID] =
+{
+    UUID_SERVCLASS_PNP_INFORMATION,         /* Reserved */
+    UUID_SERVCLASS_SERIAL_PORT,             /* BTA_SPP_SERVICE_ID */
+    UUID_SERVCLASS_DIALUP_NETWORKING,       /* BTA_DUN_SERVICE_ID */
+    UUID_SERVCLASS_AUDIO_SOURCE,            /* BTA_A2DP_SOURCE_SERVICE_ID */
+    UUID_SERVCLASS_LAN_ACCESS_USING_PPP,    /* BTA_LAP_SERVICE_ID */
+    UUID_SERVCLASS_HEADSET,                 /* BTA_HSP_HS_SERVICE_ID */
+    UUID_SERVCLASS_HF_HANDSFREE,            /* BTA_HFP_HS_SERVICE_ID */
+    UUID_SERVCLASS_OBEX_OBJECT_PUSH,        /* BTA_OPP_SERVICE_ID */
+    UUID_SERVCLASS_OBEX_FILE_TRANSFER,      /* BTA_FTP_SERVICE_ID */
+    UUID_SERVCLASS_CORDLESS_TELEPHONY,      /* BTA_CTP_SERVICE_ID */
+    UUID_SERVCLASS_INTERCOM,                /* BTA_ICP_SERVICE_ID */
+    UUID_SERVCLASS_IRMC_SYNC,               /* BTA_SYNC_SERVICE_ID */
+    UUID_SERVCLASS_DIRECT_PRINTING,         /* BTA_BPP_SERVICE_ID */
+    UUID_SERVCLASS_IMAGING_RESPONDER,       /* BTA_BIP_SERVICE_ID */
+    UUID_SERVCLASS_PANU,                    /* BTA_PANU_SERVICE_ID */
+    UUID_SERVCLASS_NAP,                     /* BTA_NAP_SERVICE_ID */
+    UUID_SERVCLASS_GN,                      /* BTA_GN_SERVICE_ID */
+    UUID_SERVCLASS_SAP,                     /* BTA_SAP_SERVICE_ID */
+    UUID_SERVCLASS_AUDIO_SINK,              /* BTA_A2DP_SERVICE_ID */
+    UUID_SERVCLASS_AV_REMOTE_CONTROL,       /* BTA_AVRCP_SERVICE_ID */
+    UUID_SERVCLASS_HUMAN_INTERFACE,         /* BTA_HID_SERVICE_ID */
+    UUID_SERVCLASS_VIDEO_SINK,              /* BTA_VDP_SERVICE_ID */
+    UUID_SERVCLASS_PBAP_PSE,                /* BTA_PBAP_SERVICE_ID */
+    UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,   /* BTA_HSP_SERVICE_ID */
+    UUID_SERVCLASS_AG_HANDSFREE,            /* BTA_HFP_SERVICE_ID */
+    UUID_SERVCLASS_MESSAGE_ACCESS,          /* BTA_MAP_SERVICE_ID */
+    UUID_SERVCLASS_MESSAGE_NOTIFICATION,    /* BTA_MN_SERVICE_ID */
+    UUID_SERVCLASS_HDP_PROFILE,             /* BTA_HDP_SERVICE_ID */
+    UUID_SERVCLASS_PBAP_PCE                 /* BTA_PCE_SERVICE_ID */
+#if BLE_INCLUDED && BTA_GATT_INCLUDED
+    ,UUID_PROTOCOL_ATT                       /* BTA_GATT_SERVICE_ID */
+#endif
+};
+
+/*
+ * NOTE : The number of element in bta_service_id_to_btm_srv_id_lkup_tbl should be matching with
+ *        the value BTA_MAX_SERVICE_ID in bta_api.h
+ *
+ *        i.e., If you add new Service ID for BTA, the correct security ID of the new service
+ *              from Security service definitions (btm_api.h) should be added to this lookup table.
+ */
+const UINT32 bta_service_id_to_btm_srv_id_lkup_tbl [BTA_MAX_SERVICE_ID] =
+{
+    0,                                      /* Reserved */
+    BTM_SEC_SERVICE_SERIAL_PORT,            /* BTA_SPP_SERVICE_ID */
+    BTM_SEC_SERVICE_DUN,                    /* BTA_DUN_SERVICE_ID */
+    BTM_SEC_SERVICE_AVDTP,                  /* BTA_AUDIO_SOURCE_SERVICE_ID */
+    BTM_SEC_SERVICE_LAN_ACCESS,             /* BTA_LAP_SERVICE_ID */
+    BTM_SEC_SERVICE_HEADSET_AG,             /* BTA_HSP_SERVICE_ID */
+    BTM_SEC_SERVICE_AG_HANDSFREE,           /* BTA_HFP_SERVICE_ID */
+    BTM_SEC_SERVICE_OBEX,                   /* BTA_OPP_SERVICE_ID */
+    BTM_SEC_SERVICE_OBEX_FTP,               /* BTA_FTP_SERVICE_ID */
+    BTM_SEC_SERVICE_CORDLESS,               /* BTA_CTP_SERVICE_ID */
+    BTM_SEC_SERVICE_INTERCOM,               /* BTA_ICP_SERVICE_ID */
+    BTM_SEC_SERVICE_IRMC_SYNC,              /* BTA_SYNC_SERVICE_ID */
+    BTM_SEC_SERVICE_BPP_JOB,                /* BTA_BPP_SERVICE_ID */
+    BTM_SEC_SERVICE_BIP,                    /* BTA_BIP_SERVICE_ID */
+    BTM_SEC_SERVICE_BNEP_PANU,              /* BTA_PANU_SERVICE_ID */
+    BTM_SEC_SERVICE_BNEP_NAP,               /* BTA_NAP_SERVICE_ID */
+    BTM_SEC_SERVICE_BNEP_GN,                /* BTA_GN_SERVICE_ID */
+    BTM_SEC_SERVICE_SAP,                    /* BTA_SAP_SERVICE_ID */
+    BTM_SEC_SERVICE_AVDTP,                  /* BTA_A2DP_SERVICE_ID */
+    BTM_SEC_SERVICE_AVCTP,                  /* BTA_AVRCP_SERVICE_ID */
+    BTM_SEC_SERVICE_HID_SEC_CTRL,           /* BTA_HID_SERVICE_ID */
+    BTM_SEC_SERVICE_AVDTP,                  /* BTA_VDP_SERVICE_ID */
+    BTM_SEC_SERVICE_PBAP,                   /* BTA_PBAP_SERVICE_ID */
+    BTM_SEC_SERVICE_HEADSET,                /* BTA_HSP_HS_SERVICE_ID */
+    BTM_SEC_SERVICE_HF_HANDSFREE,           /* BTA_HFP_HS_SERVICE_ID */
+    BTM_SEC_SERVICE_MAP,                    /* BTA_MAP_SERVICE_ID */
+    BTM_SEC_SERVICE_MAP,                    /* BTA_MN_SERVICE_ID */
+    BTM_SEC_SERVICE_HDP_SNK,                /* BTA_HDP_SERVICE_ID */
+    BTM_SEC_SERVICE_PBAP                    /* BTA_PCE_SERVICE_ID */
+#if BLE_INCLUDED && BTA_GATT_INCLUDED
+    ,BTM_SEC_SERVICE_ATT                    /* BTA_GATT_SERVICE_ID */
+#endif
+};
+
+/* bta security callback */
+const tBTM_APPL_INFO bta_security =
+{
+    &bta_dm_authorize_cback,
+    &bta_dm_pin_cback,
+    &bta_dm_new_link_key_cback,
+    &bta_dm_link_key_request_cback,
+    &bta_dm_authentication_complete_cback,
+    NULL,
+    &bta_dm_bond_cancel_complete_cback,
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+    &bta_dm_sp_cback
+#else
+    NULL
+#endif
+#if BLE_INCLUDED == TRUE
+#if SMP_INCLUDED == TRUE
+    ,&bta_dm_ble_smp_cback
+#endif
+    ,&bta_dm_ble_id_key_cback
+#endif
+
+};
+
+/* TBD... To be moved to some conf file..? */
+#define BTA_DM_MAX_ROLE_SWITCH_BLACKLIST_COUNT   5
+const tBTA_DM_LMP_VER_INFO bta_role_switch_blacklist[BTA_DM_MAX_ROLE_SWITCH_BLACKLIST_COUNT] =
+{
+        {0x000F,0x2000,0x04},
+        {0x00,0x00,0x00},
+        {0x00,0x00,0x00},
+        {0x00,0x00,0x00},
+        {0x00,0x00,0x00}
+};
+
+#define MAX_DISC_RAW_DATA_BUF       (4096)
+UINT8 g_disc_raw_data_buf[MAX_DISC_RAW_DATA_BUF];
+
+/*******************************************************************************
+**
+** Function         bta_dm_app_ready_timer_cback
+**
+** Description      allow sending EIR to controller
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+static void bta_dm_app_ready_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+    bta_dm_set_eir (NULL);
+}
+#else
+#define bta_dm_app_ready_timer_cback (x)
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_dm_enable
+**
+** Description      Initialises the BT device manager
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_enable(tBTA_DM_MSG *p_data)
+{
+    tBTA_SYS_HW_MSG *sys_enable_event;
+    tBTA_DM_SEC sec_event;
+
+
+    /* if already in use, return an error */
+    if( bta_dm_cb.is_bta_dm_active == TRUE  )
+    {
+        APPL_TRACE_WARNING0("bta_dm_enable - device already started by another application");
+        memset(&sec_event.enable, 0, sizeof ( tBTA_DM_ENABLE ));
+        sec_event.enable.status = BTA_FAILURE;
+        if( p_data->enable.p_sec_cback != NULL  )
+            p_data->enable.p_sec_cback (BTA_DM_ENABLE_EVT, &sec_event);
+        return;
+    }
+
+
+    /* first, register our callback to SYS HW manager */
+    bta_sys_hw_register( BTA_SYS_HW_BLUETOOTH, bta_dm_sys_hw_cback );
+
+    /* make sure security callback is saved - if no callback, do not erase the previous one,
+    it could be an error recovery mechanism */
+    if( p_data->enable.p_sec_cback != NULL  )
+    bta_dm_cb.p_sec_cback = p_data->enable.p_sec_cback;
+    /* notify BTA DM is now active */
+    bta_dm_cb.is_bta_dm_active = TRUE;
+
+    /* send a message to BTA SYS */
+    if ((sys_enable_event = (tBTA_SYS_HW_MSG *) GKI_getbuf(sizeof(tBTA_SYS_HW_MSG))) != NULL)
+    {
+        sys_enable_event->hdr.event = BTA_SYS_API_ENABLE_EVT;
+        sys_enable_event->hw_module = BTA_SYS_HW_BLUETOOTH;
+
+        bta_sys_sendmsg(sys_enable_event);
+
+    }
+
+
+
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_sys_hw_cback
+**
+** Description     callback register to SYS to get HW status updates
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_sys_hw_cback( tBTA_SYS_HW_EVT status )
+{
+    DEV_CLASS   dev_class;
+    tBTA_DM_SEC_CBACK           *temp_cback;
+#if BLE_INCLUDED == TRUE
+    UINT8                   key_mask = 0;
+    BT_OCTET16              er;
+    tBTA_BLE_LOCAL_ID_KEYS  id_key;
+    tBT_UUID                app_uuid = {LEN_UUID_128,{0}};
+#endif
+    APPL_TRACE_DEBUG1(" bta_dm_sys_hw_cback with event: %i" , status );
+
+    /* On H/W error evt, report to the registered DM application callback */
+    if (status == BTA_SYS_HW_ERROR_EVT) {
+          if( bta_dm_cb.p_sec_cback != NULL )
+                bta_dm_cb.p_sec_cback(BTA_DM_HW_ERROR_EVT, NULL);
+          return;
+    }
+    if( status == BTA_SYS_HW_OFF_EVT )
+    {
+        if( bta_dm_cb.p_sec_cback != NULL )
+            bta_dm_cb.p_sec_cback(BTA_DM_DISABLE_EVT, NULL);
+
+        /* reinitialize the control block */
+        memset(&bta_dm_cb, 0, sizeof(bta_dm_cb));
+
+        /* unregister from SYS */
+        bta_sys_hw_unregister( BTA_SYS_HW_BLUETOOTH );
+        /* notify BTA DM is now unactive */
+        bta_dm_cb.is_bta_dm_active = FALSE;
+    }
+    else
+    if( status == BTA_SYS_HW_ON_EVT )
+    {
+        /* FIXME: We should not unregister as the SYS shall invoke this callback on a H/W error.
+        * We need to revisit when this platform has more than one BLuetooth H/W chip */
+        //bta_sys_hw_unregister( BTA_SYS_HW_BLUETOOTH);
+
+        /* save security callback */
+        temp_cback = bta_dm_cb.p_sec_cback;
+        /* make sure the control block is properly initialized */
+        memset(&bta_dm_cb, 0, sizeof(bta_dm_cb));
+        /* and retrieve the callback */
+        bta_dm_cb.p_sec_cback=temp_cback;
+        bta_dm_cb.is_bta_dm_active = TRUE;
+
+        /* hw is ready, go on with BTA DM initialization */
+        memset(&bta_dm_search_cb, 0x00, sizeof(bta_dm_search_cb));
+        memset(&bta_dm_conn_srvcs, 0x00, sizeof(bta_dm_conn_srvcs));
+        memset(&bta_dm_di_cb, 0, sizeof(tBTA_DM_DI_CB));
+
+        memcpy(dev_class, bta_dm_cfg.dev_class, sizeof(dev_class));
+        BTM_SetDeviceClass (dev_class);
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+        /* load BLE local information: ID keys, ER if available */
+        bta_dm_co_ble_load_local_keys(&key_mask, er, &id_key);
+
+        if (key_mask & BTA_BLE_LOCAL_KEY_TYPE_ER)
+        {
+            BTM_BleLoadLocalKeys(BTA_BLE_LOCAL_KEY_TYPE_ER, (tBTM_BLE_LOCAL_KEYS *)&er);
+        }
+        if (key_mask & BTA_BLE_LOCAL_KEY_TYPE_ID)
+        {
+            BTM_BleLoadLocalKeys(BTA_BLE_LOCAL_KEY_TYPE_ID, (tBTM_BLE_LOCAL_KEYS *)&id_key);
+        }
+#if ((defined BTA_GATT_INCLUDED) &&  (BTA_GATT_INCLUDED == TRUE))
+        memset (&app_uuid.uu.uuid128, 0x87, LEN_UUID_128);
+        BTA_GATTC_AppRegister(&app_uuid, bta_dm_gattc_callback);
+#endif
+#endif
+
+        BTM_SecRegister((tBTM_APPL_INFO*)&bta_security);
+        BTM_SetDefaultLinkSuperTout(bta_dm_cfg.link_timeout);
+        BTM_WritePageTimeout(bta_dm_cfg.page_timeout);
+        bta_dm_cb.cur_policy = bta_dm_cfg.policy_settings;
+        BTM_SetDefaultLinkPolicy(bta_dm_cb.cur_policy);
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+        BTM_RegBusyLevelNotif (bta_dm_bl_change_cback, NULL, BTM_BL_UPDATE_MASK|BTM_BL_ROLE_CHG_MASK);
+#else
+        BTM_AclRegisterForChanges(bta_dm_acl_change_cback);
+#endif
+        /* Earlier, we used to invoke BTM_ReadLocalAddr which was just copying the bd_addr
+           from the control block and invoking the callback which was sending the DM_ENABLE_EVT.
+           But then we have a few HCI commands being invoked above which were still in progress
+           when the ENABLE_EVT was sent. So modified this to fetch the local name which forces
+           the DM_ENABLE_EVT to be sent only after all the init steps are complete */
+        BTM_ReadLocalDeviceNameFromController((tBTM_CMPL_CB *)bta_dm_local_name_cback);
+
+        bta_sys_rm_register((tBTA_SYS_CONN_CBACK*)bta_dm_rm_cback);
+
+        /* initialize bluetooth low power manager */
+        bta_dm_init_pm();
+
+        bta_sys_policy_register((tBTA_SYS_CONN_CBACK*)bta_dm_policy_cback);
+
+
+        // BLUEDROID REMOVE ??
+#if 0
+#if 1
+        /* Create broadcom primary DI record */
+        if(WBT_ExtCreateRecord())
+        {
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )
+            /* while app_ready_timer is running, BTA DM doesn't send EIR to controller */
+            bta_dm_cb.app_ready_timer.p_cback = (TIMER_CBACK*)&bta_dm_app_ready_timer_cback;
+            bta_sys_start_timer(&bta_dm_cb.app_ready_timer, 0, 100);
+
+            bta_sys_add_uuid(UUID_SERVCLASS_PNP_INFORMATION);
+#endif
+            bta_dm_di_cb.di_handle[bta_dm_di_cb.di_num] = 0;    /* primary DI record */
+            bta_dm_di_cb.di_num ++;
+        }
+#else   /* Eventually implement pin code */
+        if (WBT_ExtCreateRecord())
+            WBT_ExtAddPinCode();
+#endif
+#endif
+    }
+    else
+        APPL_TRACE_DEBUG0(" --- ignored event");
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_disable
+**
+** Description      Disables the BT device manager
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_disable (tBTA_DM_MSG *p_data)
+{
+    /* Set l2cap idle timeout to 0 (so BTE immediately disconnects ACL link after last channel is closed) */
+    L2CA_SetIdleTimeoutByBdAddr((UINT8 *)BT_BD_ANY, 0);
+
+    /* disable all active subsystems */
+    bta_sys_disable(BTA_SYS_HW_BLUETOOTH);
+
+    BTM_SetDiscoverability(BTM_NON_DISCOVERABLE, 0, 0);
+    BTM_SetConnectability(BTM_NON_CONNECTABLE, 0, 0);
+
+    bta_dm_disable_pm();
+
+    bta_dm_cb.disabling = TRUE;
+
+    bta_dm_search_cancel(NULL);
+
+    if(BTM_GetNumAclLinks()==0)
+    {
+#if (defined(BTA_DISABLE_DELAY) && BTA_DISABLE_DELAY > 0)
+        /* If BTA_DISABLE_DELAY is defined and greater than zero, then delay the shutdown by
+         * BTA_DISABLE_DELAY milliseconds
+         */
+        APPL_TRACE_WARNING2("%s BTA_DISABLE_DELAY set to %d ms",
+                            __FUNCTION__, BTA_DISABLE_DELAY);
+        bta_sys_stop_timer(&bta_dm_cb.disable_timer);
+        bta_dm_cb.disable_timer.p_cback = (TIMER_CBACK*)&bta_dm_disable_conn_down_timer_cback;
+        bta_sys_start_timer(&bta_dm_cb.disable_timer, 0, BTA_DISABLE_DELAY);
+#else
+        bta_dm_disable_conn_down_timer_cback(NULL);
+#endif
+    }
+    else
+    {
+        bta_dm_cb.disable_timer.p_cback = (TIMER_CBACK*)&bta_dm_disable_timer_cback;
+        bta_sys_start_timer(&bta_dm_cb.disable_timer, 0, 5000);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_disable_timer_cback
+**
+** Description      Called if the disable timer expires
+**                  Used to close ACL connections which are still active
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_disable_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+
+    UINT8 i;
+
+    APPL_TRACE_EVENT0(" bta_dm_disable_timer_cback  ");
+
+    if(BTM_GetNumAclLinks())
+    {
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            btm_remove_acl(bta_dm_cb.device_list.peer_device[i].peer_bdaddr);
+
+        }
+
+    }
+    else
+    {
+        bta_dm_cb.disabling = FALSE;
+
+        bta_sys_remove_uuid(UUID_SERVCLASS_PNP_INFORMATION);
+        bta_dm_cb.p_sec_cback(BTA_DM_DISABLE_EVT, NULL);
+    }
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_dev_name
+**
+** Description      Sets local device name
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_set_dev_name (tBTA_DM_MSG *p_data)
+{
+
+    BTM_SetLocalDeviceName((char*)p_data->set_name.name);
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    bta_dm_set_eir ((char*)p_data->set_name.name);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_visibility
+**
+** Description      Sets discoverability, connectability and pairability
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_set_visibility (tBTA_DM_MSG *p_data)
+{
+
+
+    /* set modes for Discoverability and connectability if not ignore */
+    if (p_data->set_visibility.disc_mode != BTA_DM_IGNORE)
+        BTM_SetDiscoverability((UINT8)p_data->set_visibility.disc_mode,
+                                bta_dm_cb.inquiry_scan_window,
+                                bta_dm_cb.inquiry_scan_interval);
+
+    if (p_data->set_visibility.conn_mode != BTA_DM_IGNORE)
+        BTM_SetConnectability((UINT8)p_data->set_visibility.conn_mode,
+                                bta_dm_cb.page_scan_window,
+                                bta_dm_cb.page_scan_interval);
+
+    /* Send False or True if not ignore */
+    if (p_data->set_visibility.pair_mode != BTA_DM_IGNORE )
+    {
+
+        if (p_data->set_visibility.pair_mode == BTA_DM_NON_PAIRABLE)
+            bta_dm_cb.disable_pair_mode = TRUE;
+        else
+            bta_dm_cb.disable_pair_mode = FALSE;
+
+    }
+
+    /* Send False or True if not ignore */
+    if (p_data->set_visibility.conn_paired_only != BTA_DM_IGNORE)
+    {
+
+        if (p_data->set_visibility.conn_paired_only == BTA_DM_CONN_ALL)
+            bta_dm_cb.conn_paired_only = FALSE;
+        else
+            bta_dm_cb.conn_paired_only = TRUE;
+
+    }
+
+    /* Change mode if either mode is not ignore */
+    if (p_data->set_visibility.pair_mode != BTA_DM_IGNORE || p_data->set_visibility.conn_paired_only != BTA_DM_IGNORE)
+        BTM_SetPairableMode((BOOLEAN)(!(bta_dm_cb.disable_pair_mode)),bta_dm_cb.conn_paired_only);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_afhchannels
+**
+** Description      This function sets the AFH first and
+**                  last disable channel, so channels within
+**                  that range are disabled.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_set_afhchannels (tBTA_DM_MSG *p_data)
+{
+    BTM_SetAfhChannels(p_data->set_afhchannels.first,p_data->set_afhchannels.last);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_vendor_spec_command
+**
+** Description      Send a vendor specific command to the controller
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_vendor_spec_command (tBTA_DM_MSG *p_data)
+{
+    tBTM_STATUS status;
+
+    status = BTM_VendorSpecificCommand(p_data->vendor_command.opcode,p_data->vendor_command.param_len,p_data->vendor_command.p_param_buf, p_data->vendor_command.p_cback);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_tx_inqpower
+**
+** Description      write inquiry tx power.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_tx_inqpower(tBTA_DM_MSG *p_data)
+{
+    if (BTM_WriteInquiryTxPower (p_data->tx_inq_pwr.tx_power) == BTM_ILLEGAL_VALUE)
+    {
+        APPL_TRACE_ERROR1("Invalid Inquiry Tx Power: %d", p_data->tx_inq_pwr.tx_power);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_remove_device
+**
+** Description      Removes device, Disconnects ACL link if required.
+****
+*******************************************************************************/
+void bta_dm_remove_device (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_API_REMOVE_DEVICE *p_dev = &p_data->remove_dev;
+    int i;
+    tBTA_DM_SEC sec_event;
+
+    if (BTM_IsAclConnectionUp(p_dev->bd_addr))
+    {
+        /* Take the link down first, and mark the device for removal when disconnected */
+        btm_remove_acl( p_dev->bd_addr) ;
+
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            if(!bdcmp( bta_dm_cb.device_list.peer_device[i].peer_bdaddr, p_dev->bd_addr))
+            break;
+        }
+
+        if(i < bta_dm_cb.device_list.count)
+        {
+            bta_dm_cb.device_list.peer_device[i].conn_state = BTA_DM_UNPAIRING;
+        }
+    }
+    else    /* Ok to remove the device in application layer */
+    {
+        BTM_SecDeleteDevice(p_dev->bd_addr);
+        if( bta_dm_cb.p_sec_cback )
+        {
+            bdcpy(sec_event.link_down.bd_addr, p_dev->bd_addr);
+            /* No connection, set status to success (acl disc code not valid) */
+            sec_event.link_down.status = HCI_SUCCESS;
+            bta_dm_cb.p_sec_cback(BTA_DM_DEV_UNPAIRED_EVT, &sec_event);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_add_device
+**
+** Description      This function adds a Link Key to an security database entry.
+**                  It is normally called during host startup to restore all required information
+**                  stored in the NVRAM.
+****
+*******************************************************************************/
+void bta_dm_add_device (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_API_ADD_DEVICE *p_dev = &p_data->add_dev;
+    UINT8   *p_dc = NULL;
+    UINT8   *p_lc = NULL;
+    UINT32  trusted_services_mask[BTM_SEC_SERVICE_ARRAY_SIZE];
+    UINT8   index = 0;
+    UINT8   btm_mask_index = 0;
+
+    memset (trusted_services_mask, 0, sizeof(trusted_services_mask));
+
+    /* If not all zeros, the device class has been specified */
+    if (p_dev->dc_known)
+        p_dc = (UINT8 *)p_dev->dc;
+
+    if (p_dev->link_key_known)
+        p_lc = (UINT8 *)p_dev->link_key;
+
+    if (p_dev->is_trusted)
+    {
+        /* covert BTA service mask to BTM mask */
+        while (p_dev->tm && (index < BTA_MAX_SERVICE_ID))
+        {
+            if (p_dev->tm & (UINT32)(1<<index))
+            {
+
+                btm_mask_index =  bta_service_id_to_btm_srv_id_lkup_tbl[index] / BTM_SEC_ARRAY_BITS;
+                trusted_services_mask[btm_mask_index] |= (UINT32)(1 << (bta_service_id_to_btm_srv_id_lkup_tbl[index] - (UINT32)(btm_mask_index * 32)));
+
+                p_dev->tm &= (UINT32)(~(1<<index));
+
+            }
+            index++;
+        }
+    }
+
+    if (!BTM_SecAddDevice (p_dev->bd_addr, p_dc, p_dev->bd_name, p_dev->features,
+                           trusted_services_mask, p_lc, p_dev->key_type, p_dev->io_cap))
+    {
+        APPL_TRACE_ERROR2 ("BTA_DM: Error adding device %08x%04x",
+                (p_dev->bd_addr[0]<<24)+(p_dev->bd_addr[1]<<16)+(p_dev->bd_addr[2]<<8)+p_dev->bd_addr[3],
+                (p_dev->bd_addr[4]<<8)+p_dev->bd_addr[5]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_bond
+**
+** Description      Bonds with peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_bond (tBTA_DM_MSG *p_data)
+{
+    tBTM_STATUS status;
+    tBTA_DM_SEC sec_event;
+    char        *p_name;
+
+    status = BTM_SecBond ( p_data->bond.bd_addr, 0, NULL, 0 );
+
+    if (bta_dm_cb.p_sec_cback && (status != BTM_CMD_STARTED))
+    {
+
+        p_name = BTM_SecReadDevName(p_data->bond.bd_addr);
+        if (!p_name)
+            p_name = "";
+
+        memset(&sec_event, 0, sizeof(tBTA_DM_SEC));
+        bdcpy(sec_event.auth_cmpl.bd_addr, p_data->bond.bd_addr);
+        memcpy(sec_event.auth_cmpl.bd_name, p_name, (BD_NAME_LEN-1));
+        sec_event.auth_cmpl.bd_name[BD_NAME_LEN-1] = 0;
+
+/*      taken care of by memset [above]
+        sec_event.auth_cmpl.key_present = FALSE;
+        sec_event.auth_cmpl.success = FALSE;
+*/
+        sec_event.auth_cmpl.fail_reason = HCI_ERR_ILLEGAL_COMMAND;
+        if (status == BTM_SUCCESS)
+            sec_event.auth_cmpl.success = TRUE;
+
+        bta_dm_cb.p_sec_cback(BTA_DM_AUTH_CMPL_EVT, &sec_event);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_bond_cancel
+**
+** Description      Cancels bonding with a peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_bond_cancel (tBTA_DM_MSG *p_data)
+{
+    tBTM_STATUS status;
+    tBTA_DM_SEC sec_event;
+
+    APPL_TRACE_EVENT0(" bta_dm_bond_cancel ");
+    status = BTM_SecBondCancel ( p_data->bond_cancel.bd_addr );
+
+    if (bta_dm_cb.p_sec_cback && (status != BTM_CMD_STARTED && status != BTM_SUCCESS))
+    {
+        sec_event.bond_cancel_cmpl.result = BTA_FAILURE;
+
+        bta_dm_cb.p_sec_cback(BTA_DM_BOND_CANCEL_CMPL_EVT, &sec_event);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pin_reply
+**
+** Description      Send the pin_reply to a request from BTM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_pin_reply (tBTA_DM_MSG *p_data)
+{
+    UINT32  trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE];
+    UINT32  * current_trusted_mask;
+
+    current_trusted_mask = BTM_ReadTrustedMask(p_data->pin_reply.bd_addr);
+
+    if(current_trusted_mask)
+    {
+        memcpy(trusted_mask, current_trusted_mask, sizeof(trusted_mask));
+    }
+    else
+    {
+        memset(trusted_mask, 0, sizeof(trusted_mask));
+    }
+
+    if(p_data->pin_reply.accept)
+    {
+
+        BTM_PINCodeReply(p_data->pin_reply.bd_addr, BTM_SUCCESS, p_data->pin_reply.pin_len, p_data->pin_reply.p_pin, trusted_mask );
+    }
+    else
+    {
+        BTM_PINCodeReply(p_data->pin_reply.bd_addr, BTM_NOT_AUTHORIZED, 0, NULL, trusted_mask );
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_link_policy
+**
+** Description      remove/set link policy mask.
+**                  wake the link, is sniff/park is removed
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_link_policy (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_PEER_DEVICE *p_dev;
+
+    p_dev = bta_dm_find_peer_device(p_data->link_policy.bd_addr);
+    if(!p_dev)
+        return;
+
+    APPL_TRACE_DEBUG2(" bta_dm_link_policy set:%d, policy:0x%x",
+        p_data->link_policy.set, p_data->link_policy.policy_mask);
+    if(p_data->link_policy.set)
+    {
+        /* restore the default link policy */
+        p_dev->link_policy |= p_data->link_policy.policy_mask;
+        BTM_SetLinkPolicy(p_dev->peer_bdaddr, &(p_dev->link_policy));
+    }
+    else
+    {
+        /* clear the policy from the default link policy */
+        p_dev->link_policy &= (~p_data->link_policy.policy_mask);
+        BTM_SetLinkPolicy(p_dev->peer_bdaddr, &(p_dev->link_policy));
+
+        if(p_data->link_policy.policy_mask & (HCI_ENABLE_SNIFF_MODE | HCI_ENABLE_PARK_MODE))
+        {
+            /* if clearing sniff/park, wake the link */
+            bta_dm_pm_active(p_dev->peer_bdaddr);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_policy_cback
+**
+** Description      process the link policy changes
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_policy_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    tBTA_DM_PEER_DEVICE *p_dev = NULL;
+    UINT16  policy = app_id;
+    UINT32  mask = (UINT32)(1 << id);
+
+    if(peer_addr)
+        p_dev = bta_dm_find_peer_device(peer_addr);
+
+    APPL_TRACE_DEBUG2(" bta_dm_policy_cback cmd:%d, policy:0x%x",
+        status, policy);
+    switch(status)
+    {
+    case BTA_SYS_PLCY_SET:
+        if(!p_dev)
+            return;
+        /* restore the default link policy */
+        p_dev->link_policy |= policy;
+        BTM_SetLinkPolicy(p_dev->peer_bdaddr, &(p_dev->link_policy));
+        break;
+
+    case BTA_SYS_PLCY_CLR:
+        if(!p_dev)
+            return;
+        /* clear the policy from the default link policy */
+        p_dev->link_policy &= (~policy);
+        BTM_SetLinkPolicy(p_dev->peer_bdaddr, &(p_dev->link_policy));
+
+        if(policy & (HCI_ENABLE_SNIFF_MODE | HCI_ENABLE_PARK_MODE))
+        {
+            /* if clearing sniff/park, wake the link */
+            bta_dm_pm_active(p_dev->peer_bdaddr);
+        }
+        break;
+
+    case BTA_SYS_PLCY_DEF_SET:
+        /* want to restore/set the role switch policy */
+        bta_dm_cb.role_policy_mask &= ~mask;
+        if(0 == bta_dm_cb.role_policy_mask)
+        {
+            /* if nobody wants to insist on the role */
+            bta_dm_cb.cur_policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+            BTM_SetDefaultLinkPolicy(bta_dm_cb.cur_policy);
+        }
+        break;
+
+    case BTA_SYS_PLCY_DEF_CLR:
+        /* want to remove the role switch policy */
+        bta_dm_cb.role_policy_mask |= mask;
+        bta_dm_cb.cur_policy &= ~HCI_ENABLE_MASTER_SLAVE_SWITCH;
+        BTM_SetDefaultLinkPolicy(bta_dm_cb.cur_policy);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_auth_reply
+**
+** Description      Send the authorization reply to a request from BTM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_auth_reply (tBTA_DM_MSG *p_data)
+{
+
+    UINT32  trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE];
+    UINT8   btm_mask_index = 0;
+    UINT32  * current_trusted_mask;
+
+    current_trusted_mask = BTM_ReadTrustedMask(p_data->auth_reply.bd_addr);
+
+    if(current_trusted_mask)
+    {
+        memcpy(trusted_mask, current_trusted_mask, sizeof(trusted_mask));
+    }
+    else
+    {
+        memset(trusted_mask, 0, sizeof(trusted_mask));
+    }
+
+    if(p_data->auth_reply.response != BTA_DM_NOT_AUTH)
+    {
+        if(p_data->auth_reply.response == BTA_DM_AUTH_PERM)
+        {
+            if(p_data->auth_reply.service < BTA_MAX_SERVICE_ID)
+            {
+                /* convert BTA service id to BTM mask */
+                btm_mask_index =  bta_service_id_to_btm_srv_id_lkup_tbl[p_data->auth_reply.service] / 32;
+                trusted_mask[btm_mask_index] |= (UINT32)(1 << (bta_service_id_to_btm_srv_id_lkup_tbl[p_data->auth_reply.service] - (UINT32)(btm_mask_index * 32)));
+
+            }
+        }
+        BTM_DeviceAuthorized (p_data->auth_reply.bd_addr, BTM_SUCCESS,trusted_mask);
+    }
+    else
+    {
+        BTM_DeviceAuthorized (p_data->auth_reply.bd_addr, BTM_NOT_AUTHORIZED,trusted_mask);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_confirm
+**
+** Description      Send the user confirm request reply in response to a
+**                  request from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_confirm(tBTA_DM_MSG *p_data)
+{
+    tBTM_STATUS res = BTM_NOT_AUTHORIZED;
+
+    if(p_data->confirm.accept == TRUE)
+        res = BTM_SUCCESS;
+    BTM_ConfirmReqReply(res, p_data->confirm.bd_addr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_passkey_cancel
+**
+** Description      Send the passkey cancel from SP initiator by sending a negative
+**                  passkey request replyreply.
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+void bta_dm_passkey_cancel(tBTA_DM_MSG *p_data)
+{
+    BTM_PasskeyReqReply(BTM_NOT_AUTHORIZED, p_data->passkey_cancel.bd_addr, 0);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_dm_loc_oob
+**
+** Description      Retrieve the OOB data from the local LM
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_OOB_INCLUDED == TRUE)
+void bta_dm_loc_oob(tBTA_DM_MSG *p_data)
+{
+    BTM_ReadLocalOobData();
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ci_io_req_act
+**
+** Description      respond to the IO capabilities request from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_ci_io_req_act(tBTA_DM_MSG *p_data)
+{
+    tBTM_AUTH_REQ   auth_req = BTM_AUTH_AP_NO;
+    if(p_data->ci_io_req.auth_req)
+        auth_req = BTM_AUTH_AP_YES;
+    BTM_IoCapRsp(p_data->ci_io_req.bd_addr, p_data->ci_io_req.io_cap,
+        p_data->ci_io_req.oob_data, auth_req);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ci_rmt_oob_act
+**
+** Description      respond to the OOB data request for the remote device from BTM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_ci_rmt_oob_act(tBTA_DM_MSG *p_data)
+{
+    tBTM_STATUS res = BTM_NOT_AUTHORIZED;
+
+    if(p_data->ci_rmt_oob.accept == TRUE)
+        res = BTM_SUCCESS;
+    BTM_RemoteOobDataReply(res, p_data->ci_rmt_oob.bd_addr,
+        p_data->ci_rmt_oob.c, p_data->ci_rmt_oob.r );
+}
+#endif /* BTM_OOB_INCLUDED */
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_start
+**
+** Description      Starts an inquiry
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_start (tBTA_DM_MSG *p_data)
+{
+    tBTM_INQUIRY_CMPL result;
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    UINT16 len = (UINT16)(sizeof(tBT_UUID) * p_data->search.num_uuid);
+#endif
+
+    APPL_TRACE_DEBUG1("bta_dm_search_start avoid_scatter=%d", bta_dm_cfg.avoid_scatter);
+    if (bta_dm_cfg.avoid_scatter &&
+        (p_data->search.rs_res == BTA_DM_RS_NONE) && bta_dm_check_av(BTA_DM_API_SEARCH_EVT))
+    {
+        memcpy(&bta_dm_cb.search_msg, &p_data->search, sizeof(tBTA_DM_API_SEARCH));
+        return;
+    }
+
+    BTM_ClearInqDb(NULL);
+    /* save search params */
+    bta_dm_search_cb.p_search_cback = p_data->search.p_cback;
+    bta_dm_search_cb.services = p_data->search.services;
+
+#if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE)
+    utl_freebuf((void **)&bta_dm_search_cb.p_srvc_uuid);
+
+    if ((bta_dm_search_cb.num_uuid = p_data->search.num_uuid) != 0 &&
+         p_data->search.p_uuid != NULL)
+    {
+        if ((bta_dm_search_cb.p_srvc_uuid = (tBT_UUID *)GKI_getbuf(len)) == NULL)
+        {
+            APPL_TRACE_ERROR0("bta_dm_search_start no resources");
+
+            result.status = BTA_FAILURE;
+            result.num_resp = 0;
+            bta_dm_inq_cmpl_cb ((void *)&result);
+            return;
+        }
+//        bta_dm_search_cb.p_srvc_uuid = (tBT_UUID *)GKI_getbuf(len);
+        memcpy(bta_dm_search_cb.p_srvc_uuid, p_data->search.p_uuid, len);
+    }
+
+    if (p_data->search.inq_params.mode & BTM_LIMITED_INQUIRY)
+        p_data->search.inq_params.mode |= BTM_BLE_LIMITED_INQUIRY;
+    else
+        p_data->search.inq_params.mode |= BTM_BLE_GENERAL_INQUIRY;
+#endif
+    result.status = BTM_StartInquiry(   (tBTM_INQ_PARMS*)&p_data->search.inq_params,
+                        bta_dm_inq_results_cb,
+                        (tBTM_CMPL_CB*) bta_dm_inq_cmpl_cb);
+
+    APPL_TRACE_EVENT1("bta_dm_search_start status=%d", result.status);
+    if (result.status != BTM_CMD_STARTED)
+    {
+        result.num_resp = 0;
+        bta_dm_inq_cmpl_cb ((void *)&result);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_cancel
+**
+** Description      Cancels an ongoing search for devices
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_cancel (tBTA_DM_MSG *p_data)
+{
+
+    tBTA_DM_MSG * p_msg;
+
+    if(BTM_IsInquiryActive())
+    {
+        BTM_CancelInquiry();
+        bta_dm_search_cancel_notify(NULL);
+
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event = BTA_DM_SEARCH_CMPL_EVT;
+            p_msg->hdr.layer_specific = BTA_DM_API_DISCOVER_EVT;
+            bta_sys_sendmsg(p_msg);
+
+        }
+    }
+    /* If no Service Search going on then issue cancel remote name in case it is active */
+    else if (!bta_dm_search_cb.name_discover_done)
+    {
+        BTM_CancelRemoteDeviceName();
+    }
+#if ((BLE_INCLUDED == TRUE) && (defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+    if (bta_dm_search_cb.gatt_disc_active)
+    {
+        bta_dm_cancel_gatt_discovery(bta_dm_search_cb.peer_bdaddr);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_discover
+**
+** Description      Discovers services on a remote device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_discover (tBTA_DM_MSG *p_data)
+{
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    UINT16 len = (UINT16)(sizeof(tBT_UUID) * p_data->discover.num_uuid);
+#endif
+    APPL_TRACE_EVENT2("bta_dm_discover services_to_search=0x%04X, sdp_search=%d",
+                      p_data->discover.services, p_data->discover.sdp_search);
+
+    /* save the search condition */
+    bta_dm_search_cb.services = p_data->discover.services;
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    utl_freebuf((void **)&bta_dm_search_cb.p_srvc_uuid);
+    if ((bta_dm_search_cb.num_uuid = p_data->discover.num_uuid) != 0 &&
+        p_data->discover.p_uuid != NULL)
+    {
+        if ((bta_dm_search_cb.p_srvc_uuid = (tBT_UUID *)GKI_getbuf(len)) == NULL)
+        {
+            p_data->discover.p_cback(BTA_DM_DISC_CMPL_EVT, NULL);
+            return;
+        }
+        memcpy(bta_dm_search_cb.p_srvc_uuid, p_data->discover.p_uuid, len);
+    }
+    bta_dm_search_cb.uuid_to_search = bta_dm_search_cb.num_uuid;
+#endif
+
+    bta_dm_search_cb.p_search_cback = p_data->discover.p_cback;
+    bta_dm_search_cb.sdp_search = p_data->discover.sdp_search;
+    bta_dm_search_cb.services_to_search = bta_dm_search_cb.services;
+    bta_dm_search_cb.service_index = 0;
+    bta_dm_search_cb.services_found = 0;
+    bta_dm_search_cb.peer_name[0] = 0;
+    bta_dm_search_cb.sdp_search = p_data->discover.sdp_search;
+    bta_dm_search_cb.p_btm_inq_info = BTM_InqDbRead (p_data->discover.bd_addr);
+
+    bta_dm_search_cb.name_discover_done = FALSE;
+    memcpy(&bta_dm_search_cb.uuid, &p_data->discover.uuid, sizeof(tSDP_UUID));
+    bta_dm_discover_device(p_data->discover.bd_addr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_di_disc_cmpl
+**
+** Description      Sends event to application when DI discovery complete
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_di_disc_cmpl(tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_DI_DISC_CMPL    di_disc;
+
+    memset(&di_disc, 0, sizeof(tBTA_DM_DI_DISC_CMPL));
+    bdcpy(di_disc.bd_addr, bta_dm_search_cb.peer_bdaddr);
+
+    if((p_data->hdr.offset == SDP_SUCCESS)
+        || (p_data->hdr.offset == SDP_DB_FULL))
+    {
+        di_disc.num_record  = SDP_GetNumDiRecords(bta_dm_di_cb.p_di_db);
+    }
+    else
+        di_disc.result      = BTA_FAILURE;
+
+    bta_dm_di_cb.p_di_db = NULL;
+    bta_dm_search_cb.p_search_cback(BTA_DM_DI_DISC_CMPL_EVT, (tBTA_DM_SEARCH *) &di_disc);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_di_disc_callback
+**
+** Description      This function queries a remote device for DI information.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_di_disc_callback(UINT16 result)
+{
+    tBTA_DM_MSG * p_msg;
+
+    if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event            = BTA_DM_SEARCH_CMPL_EVT;
+        p_msg->hdr.layer_specific   = BTA_DM_API_DI_DISCOVER_EVT;
+        p_msg->hdr.offset           = result;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_di_disc
+**
+** Description      This function queries a remote device for DI information.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_di_disc (tBTA_DM_MSG *p_data)
+{
+    UINT16  result = BTA_FAILURE;
+    tBTA_DM_MSG *p_msg;
+
+    bta_dm_search_cb.p_search_cback = p_data->di_disc.p_cback;
+    bdcpy(bta_dm_search_cb.peer_bdaddr, p_data->di_disc.bd_addr);
+    bta_dm_di_cb.p_di_db = p_data->di_disc.p_sdp_db;
+
+    if((bta_dm_search_cb.p_sdp_db = (tSDP_DISCOVERY_DB *)GKI_getbuf(BTA_DM_SDP_DB_SIZE)) != NULL)
+    {
+        if ( SDP_DiDiscover(bta_dm_search_cb.peer_bdaddr, p_data->di_disc.p_sdp_db,
+                    p_data->di_disc.len, bta_dm_di_disc_callback) == SDP_SUCCESS)
+        {
+            result = BTA_SUCCESS;
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("No buffer to start DI discovery");
+    }
+
+    if ( result == BTA_FAILURE &&
+        (p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event            = BTA_DM_SEARCH_CMPL_EVT;
+        p_msg->hdr.layer_specific   = BTA_DM_API_DI_DISCOVER_EVT;
+        p_data->hdr.offset          = result;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_read_remote_device_name
+**
+** Description      Initiate to get remote device name
+**
+** Returns          TRUE if started to get remote name
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_read_remote_device_name (BD_ADDR bd_addr)
+{
+    tBTM_STATUS  btm_status;
+
+    APPL_TRACE_DEBUG0("bta_dm_read_remote_device_name");
+
+    bdcpy(bta_dm_search_cb.peer_bdaddr, bd_addr);
+    bta_dm_search_cb.peer_name[0] = 0;
+
+    btm_status = BTM_ReadRemoteDeviceName (bta_dm_search_cb.peer_bdaddr,
+                                           (tBTM_CMPL_CB *) bta_dm_remname_cback);
+
+    if ( btm_status == BTM_CMD_STARTED )
+    {
+        APPL_TRACE_DEBUG0("bta_dm_read_remote_device_name: BTM_ReadRemoteDeviceName is started");
+
+        return (TRUE);
+    }
+    else if ( btm_status == BTM_BUSY )
+    {
+        APPL_TRACE_DEBUG0("bta_dm_read_remote_device_name: BTM_ReadRemoteDeviceName is busy");
+
+        /* Remote name discovery is on going now so BTM cannot notify through "bta_dm_remname_cback" */
+        /* adding callback to get notified that current reading remore name done */
+        BTM_SecAddRmtNameNotifyCallback(&bta_dm_service_search_remname_cback);
+
+        return (TRUE);
+    }
+    else
+    {
+        APPL_TRACE_WARNING1("bta_dm_read_remote_device_name: BTM_ReadRemoteDeviceName returns 0x%02X", btm_status);
+
+        return (FALSE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_inq_cmpl
+**
+** Description      Process the inquiry complete event from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_inq_cmpl (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_MSG * p_msg;
+    tBTA_DM_SEARCH  data;
+
+    APPL_TRACE_DEBUG0("bta_dm_inq_cmpl");
+
+    data.inq_cmpl.num_resps = p_data->inq_cmpl.num;
+    bta_dm_search_cb.p_search_cback(BTA_DM_INQ_CMPL_EVT, &data);
+
+    if((bta_dm_search_cb.p_btm_inq_info = BTM_InqDbFirst()) != NULL)
+    {
+        /* start name and service discovery from the first device on inquiry result */
+        bta_dm_search_cb.name_discover_done = FALSE;
+        bta_dm_search_cb.peer_name[0]       = 0;
+        bta_dm_discover_device(bta_dm_search_cb.p_btm_inq_info->results.remote_bd_addr);
+    }
+    else
+    {
+        /* no devices, search complete */
+        bta_dm_search_cb.services = 0;
+
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event          = BTA_DM_SEARCH_CMPL_EVT;
+            p_msg->hdr.layer_specific = BTA_DM_API_DISCOVER_EVT;
+            bta_sys_sendmsg(p_msg);
+        }
+        }
+    }
+
+/*******************************************************************************
+**
+** Function         bta_dm_rmt_name
+**
+** Description      Process the remote name result from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_rmt_name (tBTA_DM_MSG *p_data)
+{
+    APPL_TRACE_DEBUG0("bta_dm_rmt_name");
+
+    if( p_data->rem_name.result.disc_res.bd_name[0] && bta_dm_search_cb.p_btm_inq_info)
+    {
+        bta_dm_search_cb.p_btm_inq_info->appl_knows_rem_name = TRUE;
+    }
+
+    bta_dm_discover_device(bta_dm_search_cb.peer_bdaddr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_disc_rmt_name
+**
+** Description      Process the remote name result from BTM when application
+**                  wants to find the name for a bdaddr
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_disc_rmt_name (tBTA_DM_MSG *p_data)
+{
+    tBTM_INQ_INFO *p_btm_inq_info;
+
+    APPL_TRACE_DEBUG0("bta_dm_disc_rmt_name");
+
+    p_btm_inq_info = BTM_InqDbRead (p_data->rem_name.result.disc_res.bd_addr);
+    if( p_btm_inq_info )
+    {
+        if( p_data->rem_name.result.disc_res.bd_name[0] )
+        {
+            p_btm_inq_info->appl_knows_rem_name = TRUE;
+        }
+    }
+
+    bta_dm_discover_device(p_data->rem_name.result.disc_res.bd_addr);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sdp_result
+**
+** Description      Process the discovery result from sdp
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sdp_result (tBTA_DM_MSG *p_data)
+{
+
+    tSDP_DISC_REC   *p_sdp_rec = NULL;
+    tBTA_DM_MSG     *p_msg;
+    BOOLEAN          service_found = FALSE;
+    BOOLEAN          scn_found = FALSE;
+    UINT16           service = 0xFFFF;
+    tSDP_PROTOCOL_ELEM  pe;
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    tBT_UUID           *p_uuid = bta_dm_search_cb.p_srvc_uuid;
+    tBTA_DM_SEARCH      result;
+    tBT_UUID            service_uuid;
+#endif
+
+    UINT32 num_uuids = 0;
+    UINT8  uuid_list[32][MAX_UUID_SIZE]; // assuming a max of 32 services
+
+    if((p_data->sdp_event.sdp_result == SDP_SUCCESS)
+        || (p_data->sdp_event.sdp_result == SDP_NO_RECS_MATCH)
+        || (p_data->sdp_event.sdp_result == SDP_DB_FULL))
+    {
+        APPL_TRACE_DEBUG1("sdp_result::0x%x", p_data->sdp_event.sdp_result);
+        do
+        {
+
+            service_found = FALSE;
+            p_sdp_rec = NULL;
+            if( bta_dm_search_cb.service_index == (BTA_USER_SERVICE_ID+1) )
+            {
+                p_sdp_rec = SDP_FindServiceUUIDInDb(bta_dm_search_cb.p_sdp_db, &bta_dm_search_cb.uuid, p_sdp_rec);
+
+                if (p_sdp_rec && SDP_FindProtocolListElemInRec(p_sdp_rec, UUID_PROTOCOL_RFCOMM, &pe))
+                {
+                    bta_dm_search_cb.peer_scn = (UINT8) pe.params[0];
+                    scn_found = TRUE;
+                }
+            }
+            else
+            {
+                service = bta_service_id_to_uuid_lkup_tbl[bta_dm_search_cb.service_index-1];
+                p_sdp_rec = SDP_FindServiceInDb(bta_dm_search_cb.p_sdp_db, service, p_sdp_rec);
+            }
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+            /* finished with BR/EDR services, now we check the result for GATT based service UUID */
+            if (bta_dm_search_cb.service_index == BTA_MAX_SERVICE_ID)
+            {
+                if (bta_dm_search_cb.uuid_to_search != 0 && p_uuid != NULL)
+                {
+                    p_uuid +=  (bta_dm_search_cb.num_uuid - bta_dm_search_cb.uuid_to_search);
+                    /* only support 16 bits UUID for now */
+                    service = p_uuid->uu.uuid16;
+
+                }
+                /* all GATT based services */
+                do
+                {
+                    /* find a service record, report it */
+                    p_sdp_rec = SDP_FindServiceInDb(bta_dm_search_cb.p_sdp_db,
+                                                0, p_sdp_rec);
+                    if (p_sdp_rec)
+                    {
+                        if (SDP_FindServiceUUIDInRec(p_sdp_rec, &service_uuid))
+                        {
+                            /* send result back to app now, one by one */
+                            bdcpy (result.disc_ble_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+                            BCM_STRNCPY_S((char*)result.disc_ble_res.bd_name, sizeof(BD_NAME), bta_dm_get_remname(), (BD_NAME_LEN-1));
+                            result.disc_ble_res.service.len = service_uuid.len;
+                            result.disc_ble_res.service.uu.uuid16 = service_uuid.uu.uuid16;
+
+                            bta_dm_search_cb.p_search_cback(BTA_DM_DISC_BLE_RES_EVT, &result);
+                        }
+                    }
+
+                    if (bta_dm_search_cb.uuid_to_search > 0)
+                        break;
+
+                } while (p_sdp_rec);
+            }
+            else
+#endif
+            {
+            /* SDP_DB_FULL means some records with the
+               required attributes were received */
+            if(((p_data->sdp_event.sdp_result == SDP_DB_FULL) &&
+                    bta_dm_search_cb.services != BTA_ALL_SERVICE_MASK) ||
+                    (p_sdp_rec  != NULL))
+            {
+                /* If Plug and Play service record, check to see if Broadcom stack */
+                if (service == UUID_SERVCLASS_PNP_INFORMATION)
+                {
+                    if (p_sdp_rec)
+                    {
+                        if (SDP_FindAttributeInRec (p_sdp_rec, ATTR_ID_EXT_BRCM_VERSION))
+                        {
+                            service_found = TRUE;
+                        }
+                    }
+                }
+                else
+                {
+                    service_found = TRUE;
+                }
+
+                if (service_found)
+                {
+                    UINT16 tmp_svc = 0xFFFF;
+                    bta_dm_search_cb.services_found |=
+                        (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(bta_dm_search_cb.service_index-1));
+                    tmp_svc = bta_service_id_to_uuid_lkup_tbl[bta_dm_search_cb.service_index-1];
+                    /* Add to the list of UUIDs */
+                    sdpu_uuid16_to_uuid128(tmp_svc, uuid_list[num_uuids]);
+                    num_uuids++;
+                }
+            }
+            }
+
+            if(bta_dm_search_cb.services == BTA_ALL_SERVICE_MASK &&
+                bta_dm_search_cb.services_to_search == 0)
+            {
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+                if ( bta_dm_search_cb.service_index == BTA_BLE_SERVICE_ID &&
+                    bta_dm_search_cb.uuid_to_search > 0)
+                    bta_dm_search_cb.uuid_to_search --;
+
+                if (bta_dm_search_cb.uuid_to_search == 0 ||
+                    bta_dm_search_cb.service_index != BTA_BLE_SERVICE_ID)
+#endif
+                    bta_dm_search_cb.service_index++;
+            }
+            else /* regular one service per search or PNP search */
+                break;
+
+        }
+        while(bta_dm_search_cb.service_index <= BTA_MAX_SERVICE_ID);
+
+//        GKI_freebuf(bta_dm_search_cb.p_sdp_db);
+//        bta_dm_search_cb.p_sdp_db = NULL;
+        APPL_TRACE_DEBUG1("bta_dm_sdp_result services_found = %04x", bta_dm_search_cb.services_found);
+
+        /* Collect the 128-bit services here and put them into the list */
+        if(bta_dm_search_cb.services == BTA_ALL_SERVICE_MASK)
+        {
+            p_sdp_rec = NULL;
+            do
+            {
+                tBT_UUID temp_uuid;
+                /* find a service record, report it */
+                p_sdp_rec = SDP_FindServiceInDb_128bit(bta_dm_search_cb.p_sdp_db, p_sdp_rec);
+                if (p_sdp_rec)
+                {
+                    if (SDP_FindServiceUUIDInRec_128bit(p_sdp_rec, &temp_uuid))
+                    {
+                        memcpy(uuid_list[num_uuids], temp_uuid.uu.uuid128, MAX_UUID_SIZE);
+                        num_uuids++;
+                    }
+                }
+            } while (p_sdp_rec);
+        }
+        /* if there are more services to search for */
+        if(bta_dm_search_cb.services_to_search)
+        {
+            /* Free up the p_sdp_db before checking the next one */
+            bta_dm_free_sdp_db(NULL);
+            bta_dm_find_services(bta_dm_search_cb.peer_bdaddr);
+        }
+        else
+        {
+            /* callbacks */
+            /* start next bd_addr if necessary */
+
+            BTM_SecDeleteRmtNameNotifyCallback(&bta_dm_service_search_remname_cback);
+
+
+            if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+            {
+                p_msg->hdr.event = BTA_DM_DISCOVERY_RESULT_EVT;
+                p_msg->disc_result.result.disc_res.result = BTA_SUCCESS;
+                p_msg->disc_result.result.disc_res.p_raw_data = NULL;
+                p_msg->disc_result.result.disc_res.raw_data_size = 0;
+                p_msg->disc_result.result.disc_res.num_uuids = num_uuids;
+                p_msg->disc_result.result.disc_res.p_uuid_list = NULL;
+                if (num_uuids > 0) {
+                    p_msg->disc_result.result.disc_res.p_uuid_list = (UINT8*)GKI_getbuf(num_uuids*MAX_UUID_SIZE);
+                    if (p_msg->disc_result.result.disc_res.p_uuid_list) {
+                        memcpy(p_msg->disc_result.result.disc_res.p_uuid_list, uuid_list,
+                               num_uuids*MAX_UUID_SIZE);
+                    } else {
+                       p_msg->disc_result.result.disc_res.num_uuids = 0;
+                       APPL_TRACE_ERROR1("%s: Unable to allocate memory for uuid_list", __FUNCTION__);
+                    }
+                }
+                //copy the raw_data to the discovery result  structure
+                //
+                APPL_TRACE_DEBUG2("bta_dm_sdp_result (raw_data used = 0x%x raw_data_ptr = 0x%x)\r\n",bta_dm_search_cb.p_sdp_db->raw_used, bta_dm_search_cb.p_sdp_db->raw_data);
+
+                if (  bta_dm_search_cb.p_sdp_db != NULL && bta_dm_search_cb.p_sdp_db->raw_used != 0   &&
+                    bta_dm_search_cb.p_sdp_db->raw_data != NULL) {
+
+                    p_msg->disc_result.result.disc_res.p_raw_data = GKI_getbuf(bta_dm_search_cb.p_sdp_db->raw_used);
+                    if ( NULL != p_msg->disc_result.result.disc_res.p_raw_data  ) {
+                        memcpy(     p_msg->disc_result.result.disc_res.p_raw_data,
+                                    bta_dm_search_cb.p_sdp_db->raw_data,
+                                    bta_dm_search_cb.p_sdp_db->raw_used );
+
+                        p_msg->disc_result.result.disc_res.raw_data_size =
+                            bta_dm_search_cb.p_sdp_db->raw_used;
+
+                    } else {
+                        APPL_TRACE_DEBUG1("bta_dm_sdp_result GKI Alloc failed to allocate %d bytes !!\r\n",bta_dm_search_cb.p_sdp_db->raw_used);
+                    }
+
+                    bta_dm_search_cb.p_sdp_db->raw_data = NULL;     //no need to free this - it is a global assigned.
+                    bta_dm_search_cb.p_sdp_db->raw_used = 0;
+                    bta_dm_search_cb.p_sdp_db->raw_size = 0;
+                }
+                else {
+                    APPL_TRACE_DEBUG0("bta_dm_sdp_result raw data size is 0 or raw_data is null!!\r\n");
+                }
+                /* Done with p_sdp_db. Free it */
+                bta_dm_free_sdp_db(NULL);
+                p_msg->disc_result.result.disc_res.services = bta_dm_search_cb.services_found;
+
+                //Piggy back the SCN over result field
+                if( scn_found )
+                {
+                  p_msg->disc_result.result.disc_res.result = (3 + bta_dm_search_cb.peer_scn);
+                  p_msg->disc_result.result.disc_res.services |= BTA_USER_SERVICE_MASK;
+
+                  APPL_TRACE_EVENT1(" Piggy back the SCN over result field  SCN=%d", bta_dm_search_cb.peer_scn);
+
+                }
+                bdcpy (p_msg->disc_result.result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+                BCM_STRNCPY_S((char*)p_msg->disc_result.result.disc_res.bd_name, sizeof(BD_NAME),
+                        bta_dm_get_remname(), (BD_NAME_LEN-1));
+
+                /* make sure the string is null terminated */
+                p_msg->disc_result.result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+                bta_sys_sendmsg(p_msg);
+            }
+
+        }
+
+    }
+    else
+    {
+        /* conn failed. No need for timer */
+        if(p_data->sdp_event.sdp_result == SDP_CONN_FAILED || p_data->sdp_event.sdp_result == SDP_CONN_REJECTED
+           || p_data->sdp_event.sdp_result == SDP_SECURITY_ERR)
+            bta_dm_search_cb.wait_disc = FALSE;
+
+        /* not able to connect go to next device */
+        GKI_freebuf(bta_dm_search_cb.p_sdp_db);
+        bta_dm_search_cb.p_sdp_db = NULL;
+
+        BTM_SecDeleteRmtNameNotifyCallback(&bta_dm_service_search_remname_cback);
+
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event = BTA_DM_DISCOVERY_RESULT_EVT;
+            p_msg->disc_result.result.disc_res.result = BTA_FAILURE;
+            p_msg->disc_result.result.disc_res.services = bta_dm_search_cb.services_found;
+            bdcpy (p_msg->disc_result.result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+            BCM_STRNCPY_S((char*)p_msg->disc_result.result.disc_res.bd_name, sizeof(BD_NAME),
+                    bta_dm_get_remname(), (BD_NAME_LEN-1));
+
+            /* make sure the string is null terminated */
+            p_msg->disc_result.result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_cmpl
+**
+** Description      Sends event to application
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_cmpl (tBTA_DM_MSG *p_data)
+{
+    APPL_TRACE_DEBUG0("bta_dm_search_cmpl");
+
+#if (BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE)
+    utl_freebuf((void **)&bta_dm_search_cb.p_srvc_uuid);
+#endif
+
+    if (p_data->hdr.layer_specific == BTA_DM_API_DI_DISCOVER_EVT)
+        bta_dm_di_disc_cmpl(p_data);
+    else
+        bta_dm_search_cb.p_search_cback(BTA_DM_DISC_CMPL_EVT, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_disc_result
+**
+** Description      Service discovery result when discovering services on a device
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_disc_result (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_MSG *      p_msg;
+
+    APPL_TRACE_DEBUG0("bta_dm_disc_result");
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    /* if any BR/EDR service discovery has been done, report the event */
+    if ((bta_dm_search_cb.services & ((BTA_ALL_SERVICE_MASK | BTA_USER_SERVICE_MASK ) & ~BTA_BLE_SERVICE_MASK)))
+#endif
+    bta_dm_search_cb.p_search_cback(BTA_DM_DISC_RES_EVT, &p_data->disc_result.result);
+
+    /* send a message to change state */
+    if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_SEARCH_CMPL_EVT;
+        p_msg->hdr.layer_specific = BTA_DM_API_DISCOVER_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_result
+**
+** Description      Service discovery result while searching for devices
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_result (tBTA_DM_MSG *p_data)
+{
+    APPL_TRACE_DEBUG2("bta_dm_search_result searching:0x%04x, result:0x%04x",
+                       bta_dm_search_cb.services,
+                       p_data->disc_result.result.disc_res.services);
+
+    /* call back if application wants name discovery or found services that application is searching */
+    if (( !bta_dm_search_cb.services )
+      ||(( bta_dm_search_cb.services ) && ( p_data->disc_result.result.disc_res.services )))
+    {
+        bta_dm_search_cb.p_search_cback(BTA_DM_DISC_RES_EVT, &p_data->disc_result.result);
+    }
+
+    /* if searching did not initiate to create link */
+    if(!bta_dm_search_cb.wait_disc )
+    {
+#if ( BTM_EIR_CLIENT_INCLUDED == TRUE )
+        /* if service searching is done with EIR, don't search next device */
+        if( bta_dm_search_cb.p_btm_inq_info )
+#endif
+        bta_dm_discover_next_device();
+    }
+    else
+    {
+        /* wait until link is disconnected or timeout */
+        bta_dm_search_cb.sdp_results = TRUE;
+        bta_dm_search_cb.search_timer.p_cback = (TIMER_CBACK*)&bta_dm_search_timer_cback;
+        bta_sys_start_timer(&bta_dm_search_cb.search_timer, 0, 1000*(L2CAP_LINK_INACTIVITY_TOUT+1) );
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_timer_cback
+**
+** Description      Called when ACL disconnect time is over
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_search_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+
+    APPL_TRACE_EVENT0(" bta_dm_search_timer_cback  ");
+    bta_dm_search_cb.wait_disc = FALSE;
+
+    /* proceed with next device */
+    bta_dm_discover_next_device();
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_free_sdp_db
+**
+** Description      Frees SDP data base
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_free_sdp_db (tBTA_DM_MSG *p_data)
+{
+    if(bta_dm_search_cb.p_sdp_db)
+    {
+        GKI_freebuf(bta_dm_search_cb.p_sdp_db);
+        bta_dm_search_cb.p_sdp_db = NULL;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_queue_search
+**
+** Description      Queues search command while search is being cancelled
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_queue_search (tBTA_DM_MSG *p_data)
+{
+
+    bta_dm_search_cb.p_search_queue = (tBTA_DM_MSG *)GKI_getbuf(sizeof(tBTA_DM_API_SEARCH));
+    memcpy(bta_dm_search_cb.p_search_queue, p_data, sizeof(tBTA_DM_API_SEARCH));
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_queue_disc
+**
+** Description      Queues discovery command while search is being cancelled
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_queue_disc (tBTA_DM_MSG *p_data)
+{
+
+    bta_dm_search_cb.p_search_queue = (tBTA_DM_MSG *)GKI_getbuf(sizeof(tBTA_DM_API_DISCOVER));
+    memcpy(bta_dm_search_cb.p_search_queue, p_data, sizeof(tBTA_DM_API_DISCOVER));
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_clear_queue
+**
+** Description      Clears the queue if API search cancel is called
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_clear_queue (tBTA_DM_MSG *p_data)
+{
+
+    if(bta_dm_search_cb.p_search_queue)
+    {
+        GKI_freebuf(bta_dm_search_cb.p_search_queue);
+        bta_dm_search_cb.p_search_queue = NULL;
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_cancel_cmpl
+**
+** Description      Search cancel is complete
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_cancel_cmpl (tBTA_DM_MSG *p_data)
+{
+
+    if(bta_dm_search_cb.p_search_queue)
+    {
+        bta_sys_sendmsg(bta_dm_search_cb.p_search_queue);
+        bta_dm_search_cb.p_search_queue = NULL;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_cancel_transac_cmpl
+**
+** Description      Current Service Discovery or remote name procedure is
+**                  completed after search cancellation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_cancel_transac_cmpl(tBTA_DM_MSG *p_data)
+{
+
+    if(bta_dm_search_cb.p_sdp_db)
+    {
+        GKI_freebuf(bta_dm_search_cb.p_sdp_db);
+        bta_dm_search_cb.p_sdp_db = NULL;
+    }
+
+    bta_dm_search_cancel_notify(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_cancel_notify
+**
+** Description      Notify application that search has been cancelled
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_cancel_notify (tBTA_DM_MSG *p_data)
+{
+    if (bta_dm_search_cb.p_search_cback)
+    {
+        bta_dm_search_cb.p_search_cback(BTA_DM_SEARCH_CANCEL_CMPL_EVT, NULL);
+    }
+    if (!bta_dm_search_cb.name_discover_done)
+    {
+        BTM_CancelRemoteDeviceName();
+    }
+#if ((BLE_INCLUDED == TRUE) && (defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+    if (bta_dm_search_cb.gatt_disc_active)
+    {
+        bta_dm_cancel_gatt_discovery(bta_dm_search_cb.peer_bdaddr);
+    }
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_find_services
+**
+** Description      Starts discovery on a device
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_find_services ( BD_ADDR bd_addr)
+{
+
+    tSDP_UUID    uuid;
+    UINT16       attr_list[] = {ATTR_ID_SERVICE_CLASS_ID_LIST, ATTR_ID_EXT_BRCM_VERSION};
+    UINT16       num_attrs = 1;
+    tBTA_DM_MSG *p_msg;
+
+    memset (&uuid, 0, sizeof(tSDP_UUID));
+
+    while(bta_dm_search_cb.service_index < BTA_MAX_SERVICE_ID)
+    {
+        if( bta_dm_search_cb.services_to_search
+            & (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(bta_dm_search_cb.service_index)))
+        {
+            if((bta_dm_search_cb.p_sdp_db = (tSDP_DISCOVERY_DB *)GKI_getbuf(BTA_DM_SDP_DB_SIZE)) != NULL)
+            {
+                APPL_TRACE_DEBUG1("bta_dm_search_cb.services = %04x***********", bta_dm_search_cb.services);
+                /* try to search all services by search based on L2CAP UUID */
+                if(bta_dm_search_cb.services == BTA_ALL_SERVICE_MASK )
+                {
+                    APPL_TRACE_ERROR1("services_to_search = %08x",bta_dm_search_cb.services_to_search);
+                    if (bta_dm_search_cb.services_to_search & BTA_RES_SERVICE_MASK)
+                    {
+                        uuid.uu.uuid16 = bta_service_id_to_uuid_lkup_tbl[0];
+                        bta_dm_search_cb.services_to_search &= ~BTA_RES_SERVICE_MASK;
+                    }
+                    else
+                    {
+                        uuid.uu.uuid16 = UUID_PROTOCOL_L2CAP;
+                        bta_dm_search_cb.services_to_search = 0;
+                    }
+                }
+                else
+                {
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+                    /* for LE only profile */
+                    if (bta_dm_search_cb.service_index == BTA_BLE_SERVICE_ID)
+                    {
+                        if (bta_dm_search_cb.uuid_to_search > 0 && bta_dm_search_cb.p_srvc_uuid)
+                        {
+                            memcpy(&uuid,
+                                   (const void *)(bta_dm_search_cb.p_srvc_uuid + \
+                                                  bta_dm_search_cb.num_uuid - bta_dm_search_cb.uuid_to_search),
+                                   sizeof(tBT_UUID));
+
+                            bta_dm_search_cb.uuid_to_search -- ;
+                        }
+                        else
+                            uuid.uu.uuid16 = bta_service_id_to_uuid_lkup_tbl[bta_dm_search_cb.service_index];
+
+                        /* last one? clear the BLE service bit if all discovery has been done */
+                        if (bta_dm_search_cb.uuid_to_search == 0)
+                            bta_dm_search_cb.services_to_search &=
+                            (tBTA_SERVICE_MASK)(~(BTA_SERVICE_ID_TO_SERVICE_MASK(bta_dm_search_cb.service_index)));
+
+                    }
+                    else
+#endif
+                    {
+                        /* remove the service from services to be searched  */
+                        bta_dm_search_cb.services_to_search &=
+                        (tBTA_SERVICE_MASK)(~(BTA_SERVICE_ID_TO_SERVICE_MASK(bta_dm_search_cb.service_index)));
+                        uuid.uu.uuid16 = bta_service_id_to_uuid_lkup_tbl[bta_dm_search_cb.service_index];
+                    }
+                }
+
+                if (uuid.len == 0)
+                uuid.len = LEN_UUID_16;
+
+#if 0
+                if (uuid.uu.uuid16 == UUID_SERVCLASS_PNP_INFORMATION)
+                {
+                    num_attrs = 2;
+                }
+#endif
+
+                if (bta_dm_search_cb.service_index == BTA_USER_SERVICE_ID)
+                {
+                    memcpy(&uuid, &bta_dm_search_cb.uuid, sizeof(tSDP_UUID));
+                }
+
+
+                APPL_TRACE_ERROR1("****************search UUID = %04x***********", uuid.uu.uuid16);
+                //SDP_InitDiscoveryDb (bta_dm_search_cb.p_sdp_db, BTA_DM_SDP_DB_SIZE, 1, &uuid, num_attrs, attr_list);
+                SDP_InitDiscoveryDb (bta_dm_search_cb.p_sdp_db, BTA_DM_SDP_DB_SIZE, 1, &uuid, 0, NULL);
+
+
+                memset(g_disc_raw_data_buf, 0, sizeof(g_disc_raw_data_buf));
+                bta_dm_search_cb.p_sdp_db->raw_data = g_disc_raw_data_buf;
+
+                bta_dm_search_cb.p_sdp_db->raw_size = MAX_DISC_RAW_DATA_BUF;
+
+                if (!SDP_ServiceSearchAttributeRequest (bd_addr, bta_dm_search_cb.p_sdp_db, &bta_dm_sdp_callback))
+                {
+                    /* if discovery not successful with this device
+                    proceed to next one */
+                    GKI_freebuf(bta_dm_search_cb.p_sdp_db);
+                    bta_dm_search_cb.p_sdp_db = NULL;
+                    bta_dm_search_cb.service_index = BTA_MAX_SERVICE_ID;
+
+                }
+                else
+                {
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+                    if ((bta_dm_search_cb.service_index == BTA_BLE_SERVICE_ID &&
+                         bta_dm_search_cb.uuid_to_search == 0) ||
+                         bta_dm_search_cb.service_index != BTA_BLE_SERVICE_ID)
+#endif
+                    bta_dm_search_cb.service_index++;
+                    return;
+                }
+            }
+            else
+            {
+                APPL_TRACE_ERROR0("#### Failed to allocate SDP DB buffer! ####");
+            }
+        }
+
+        bta_dm_search_cb.service_index++;
+    }
+
+    /* no more services to be discovered */
+    if(bta_dm_search_cb.service_index >= BTA_MAX_SERVICE_ID)
+    {
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event = BTA_DM_DISCOVERY_RESULT_EVT;
+            p_msg->disc_result.result.disc_res.services = bta_dm_search_cb.services_found;
+            bdcpy (p_msg->disc_result.result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+            BCM_STRNCPY_S((char*)p_msg->disc_result.result.disc_res.bd_name, sizeof(BD_NAME),
+                    bta_dm_get_remname(), (BD_NAME_LEN-1));
+
+            /* make sure the string is terminated */
+            p_msg->disc_result.result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_discover_next_device
+**
+** Description      Starts discovery on the next device in Inquiry data base
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_discover_next_device(void)
+{
+
+    tBTA_DM_MSG * p_msg;
+
+    APPL_TRACE_DEBUG0("bta_dm_discover_next_device");
+
+    /* searching next device on inquiry result */
+    if((bta_dm_search_cb.p_btm_inq_info = BTM_InqDbNext(bta_dm_search_cb.p_btm_inq_info)) != NULL)
+    {
+        bta_dm_search_cb.name_discover_done = FALSE;
+        bta_dm_search_cb.peer_name[0]       = 0;
+        bta_dm_discover_device(bta_dm_search_cb.p_btm_inq_info->results.remote_bd_addr);
+    }
+    else
+    {
+        /* no devices, search complete */
+        bta_dm_search_cb.services = 0;
+
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event          = BTA_DM_SEARCH_CMPL_EVT;
+            p_msg->hdr.layer_specific = BTA_DM_API_DISCOVER_EVT;
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_discover_device
+**
+** Description      Starts name and service discovery on the device
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_discover_device(BD_ADDR remote_bd_addr)
+{
+    tBTA_DM_MSG * p_msg;
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    tBT_DEVICE_TYPE dev_type;
+    tBLE_ADDR_TYPE  addr_type;
+#endif
+
+    APPL_TRACE_DEBUG6("bta_dm_discover_device, BDA:0x%02X%02X%02X%02X%02X%02X",
+                        remote_bd_addr[0],remote_bd_addr[1],
+                        remote_bd_addr[2],remote_bd_addr[3],
+                        remote_bd_addr[4],remote_bd_addr[5]);
+
+    bdcpy(bta_dm_search_cb.peer_bdaddr, remote_bd_addr);
+
+    APPL_TRACE_DEBUG2("bta_dm_discover_device name_discover_done = %d p_btm_inq_info 0x%x ",
+                        bta_dm_search_cb.name_discover_done,
+                        bta_dm_search_cb.p_btm_inq_info
+                        );
+    if ( bta_dm_search_cb.p_btm_inq_info ) {
+
+        APPL_TRACE_DEBUG1("bta_dm_discover_device appl_knows_rem_name %d",
+                            bta_dm_search_cb.p_btm_inq_info->appl_knows_rem_name
+                            );
+    }
+
+    /* if name discovery is not done and application needs remote name */
+    if ((!bta_dm_search_cb.name_discover_done)
+       && (( bta_dm_search_cb.p_btm_inq_info == NULL )
+            ||(bta_dm_search_cb.p_btm_inq_info && (!bta_dm_search_cb.p_btm_inq_info->appl_knows_rem_name))))
+    {
+        if( bta_dm_read_remote_device_name(bta_dm_search_cb.peer_bdaddr) == TRUE )
+        {
+            return;
+        }
+        else
+        {
+            /* starting name discovery failed */
+            bta_dm_search_cb.name_discover_done = TRUE;
+        }
+    }
+
+    /* if application wants to discover service */
+    if ( bta_dm_search_cb.services )
+    {
+        /* initialize variables */
+        bta_dm_search_cb.service_index      = 0;
+        bta_dm_search_cb.services_found     = 0;
+        bta_dm_search_cb.services_to_search = bta_dm_search_cb.services;
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+        bta_dm_search_cb.uuid_to_search     = bta_dm_search_cb.num_uuid;
+#endif
+#if ( BTM_EIR_CLIENT_INCLUDED == TRUE )
+        if ((bta_dm_search_cb.p_btm_inq_info != NULL) &&
+			bta_dm_search_cb.services != BTA_USER_SERVICE_MASK
+            &&(bta_dm_search_cb.sdp_search == FALSE))
+        {
+            /* check if EIR provides the information of supported services */
+            bta_dm_eir_search_services( &bta_dm_search_cb.p_btm_inq_info->results,
+                                        &bta_dm_search_cb.services_to_search,
+                                        &bta_dm_search_cb.services_found );
+        }
+
+        /* if seaching with EIR is not completed */
+        if(bta_dm_search_cb.services_to_search)
+#endif
+        {
+            /* check whether connection already exists to the device
+               if connection exists, we don't have to wait for ACL
+               link to go down to start search on next device */
+            if(BTM_IsAclConnectionUp(bta_dm_search_cb.peer_bdaddr))
+                bta_dm_search_cb.wait_disc = FALSE;
+            else
+                bta_dm_search_cb.wait_disc = TRUE;
+
+#if (BLE_INCLUDED == TRUE && (defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+            if ( bta_dm_search_cb.p_btm_inq_info )
+            {
+                APPL_TRACE_DEBUG3("bta_dm_discover_device p_btm_inq_info 0x%x results.device_type 0x%x services_to_search 0x%x",
+                                    bta_dm_search_cb.p_btm_inq_info,
+                                    bta_dm_search_cb.p_btm_inq_info->results.device_type,
+                                    bta_dm_search_cb.services_to_search
+                                    );
+            }
+            BTM_ReadDevInfo(remote_bd_addr, &dev_type, &addr_type);
+
+            if (dev_type == BT_DEVICE_TYPE_BLE)
+            /*
+            if ( bta_dm_search_cb.p_btm_inq_info != NULL &&
+                 bta_dm_search_cb.p_btm_inq_info->results.device_type == BT_DEVICE_TYPE_BLE &&
+                 (bta_dm_search_cb.services_to_search & BTA_BLE_SERVICE_MASK))*/
+            {
+                if (bta_dm_search_cb.services_to_search & BTA_BLE_SERVICE_MASK)
+                {
+                    //set the raw data buffer here
+                    memset(g_disc_raw_data_buf, 0, sizeof(g_disc_raw_data_buf));
+                    bta_dm_search_cb.p_ble_rawdata = g_disc_raw_data_buf;
+
+                    bta_dm_search_cb.ble_raw_size = MAX_DISC_RAW_DATA_BUF;
+                    bta_dm_search_cb.ble_raw_used = 0;
+
+                    /* start GATT for service discovery */
+                    btm_dm_start_gatt_discovery(bta_dm_search_cb.peer_bdaddr);
+                    return;
+                }
+            }
+            else
+#endif
+            {
+            bta_dm_search_cb.sdp_results = FALSE;
+            bta_dm_find_services(bta_dm_search_cb.peer_bdaddr);
+
+            return;
+            }
+        }
+    }
+
+    /* name discovery and service discovery are done for this device */
+    if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_DISCOVERY_RESULT_EVT;
+        /* initialize the data structure - includes p_raw_data and raw_data_size */
+        memset(&(p_msg->disc_result.result), 0, sizeof(tBTA_DM_DISC_RES));
+        p_msg->disc_result.result.disc_res.result = BTA_SUCCESS;
+        p_msg->disc_result.result.disc_res.services = bta_dm_search_cb.services_found;
+        bdcpy (p_msg->disc_result.result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+        BCM_STRNCPY_S((char*)p_msg->disc_result.result.disc_res.bd_name,  sizeof(BD_NAME),
+                      (char*)bta_dm_search_cb.peer_name, (BD_NAME_LEN-1));
+
+        /* make sure the string is terminated */
+        p_msg->disc_result.result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sdp_callback
+**
+** Description      Callback from sdp with discovery status
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_sdp_callback (UINT16 sdp_status)
+{
+
+    tBTA_DM_SDP_RESULT * p_msg;
+
+    if ((p_msg = (tBTA_DM_SDP_RESULT *) GKI_getbuf(sizeof(tBTA_DM_SDP_RESULT))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_SDP_RESULT_EVT;
+        p_msg->sdp_result = sdp_status;
+        bta_sys_sendmsg(p_msg);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_inq_results_cb
+**
+** Description      Inquiry results callback from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_inq_results_cb (tBTM_INQ_RESULTS *p_inq, UINT8 *p_eir)
+{
+
+    tBTA_DM_SEARCH     result;
+    tBTM_INQ_INFO      *p_inq_info;
+    UINT16             service_class;
+
+    bdcpy(result.inq_res.bd_addr, p_inq->remote_bd_addr);
+    memcpy(result.inq_res.dev_class, p_inq->dev_class, DEV_CLASS_LEN);
+    BTM_COD_SERVICE_CLASS(service_class, p_inq->dev_class);
+    result.inq_res.is_limited = (service_class & BTM_COD_SERVICE_LMTD_DISCOVER)?TRUE:FALSE;
+    result.inq_res.rssi = p_inq->rssi;
+
+#if (BLE_INCLUDED == TRUE)
+    result.inq_res.ble_addr_type    = p_inq->ble_addr_type;
+    result.inq_res.inq_result_type  = p_inq->inq_result_type;
+    result.inq_res.device_type      = p_inq->device_type;
+
+#endif
+
+    /* application will parse EIR to find out remote device name */
+    result.inq_res.p_eir = p_eir;
+
+    if((p_inq_info = BTM_InqDbRead(p_inq->remote_bd_addr)) != NULL)
+    {
+        /* initialize remt_name_not_required to FALSE so that we get the name by default */
+        result.inq_res.remt_name_not_required = FALSE;
+
+    }
+
+    if(bta_dm_search_cb.p_search_cback)
+        bta_dm_search_cb.p_search_cback(BTA_DM_INQ_RES_EVT, &result);
+
+    if(p_inq_info)
+    {
+        /* application indicates if it knows the remote name, inside the callback
+         copy that to the inquiry data base*/
+        if(result.inq_res.remt_name_not_required)
+            p_inq_info->appl_knows_rem_name = TRUE;
+
+    }
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_inq_cmpl_cb
+**
+** Description      Inquiry complete callback from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_inq_cmpl_cb (void * p_result)
+{
+
+    tBTA_DM_MSG * p_msg;
+
+    APPL_TRACE_DEBUG0("bta_dm_inq_cmpl_cb");
+    if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->inq_cmpl.hdr.event = BTA_DM_INQUIRY_CMPL_EVT;
+        p_msg->inq_cmpl.num = ((tBTM_INQUIRY_CMPL *)p_result)->num_resp;
+        bta_sys_sendmsg(p_msg);
+
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_service_search_remname_cback
+**
+** Description      Remote name call back from BTM during service discovery
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_service_search_remname_cback (BD_ADDR bd_addr, DEV_CLASS dc, BD_NAME bd_name)
+{
+    tBTM_REMOTE_DEV_NAME    rem_name;
+    tBTM_STATUS             btm_status;
+
+    APPL_TRACE_DEBUG1("bta_dm_service_search_remname_cback name=<%s>", bd_name);
+
+    /* if this is what we are looking for */
+    if (!bdcmp( bta_dm_search_cb.peer_bdaddr, bd_addr))
+    {
+        rem_name.length = strlen((char*)bd_name);
+        if (rem_name.length > (BD_NAME_LEN-1))
+        {
+            rem_name.length = (BD_NAME_LEN-1);
+            rem_name.remote_bd_name[(BD_NAME_LEN-1)] = 0;
+        }
+        BCM_STRNCPY_S((char*)rem_name.remote_bd_name,  sizeof(BD_NAME), (char*)bd_name, (BD_NAME_LEN-1));
+        rem_name.status = BTM_SUCCESS;
+
+        bta_dm_remname_cback(&rem_name);
+    }
+    else
+    {
+        /* get name of device */
+        btm_status = BTM_ReadRemoteDeviceName (bta_dm_search_cb.peer_bdaddr,
+                                                (tBTM_CMPL_CB *) bta_dm_remname_cback);
+        if ( btm_status == BTM_BUSY )
+        {
+            /* wait for next chance(notification of remote name discovery done) */
+            APPL_TRACE_DEBUG0("bta_dm_service_search_remname_cback: BTM_ReadRemoteDeviceName is busy");
+        }
+        else if ( btm_status != BTM_CMD_STARTED )
+        {
+            /* if failed to start getting remote name then continue */
+            APPL_TRACE_WARNING1("bta_dm_service_search_remname_cback: BTM_ReadRemoteDeviceName returns 0x%02X", btm_status);
+
+            rem_name.length = 0;
+            rem_name.remote_bd_name[0] = 0;
+            rem_name.status = btm_status;
+            bta_dm_remname_cback(&rem_name);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_remname_cback
+**
+** Description      Remote name complete call back from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_remname_cback (tBTM_REMOTE_DEV_NAME *p_remote_name)
+{
+    tBTA_DM_REM_NAME * p_msg;
+
+    APPL_TRACE_DEBUG1("bta_dm_remname_cback name=<%s>", p_remote_name->remote_bd_name);
+
+    /* remote name discovery is done but it could be failed */
+    bta_dm_search_cb.name_discover_done = TRUE;
+    BCM_STRNCPY_S((char*)bta_dm_search_cb.peer_name, sizeof(BD_NAME), (char*)p_remote_name->remote_bd_name, (BD_NAME_LEN-1));
+    bta_dm_search_cb.peer_name[BD_NAME_LEN-1]=0;
+
+    BTM_SecDeleteRmtNameNotifyCallback(&bta_dm_service_search_remname_cback);
+
+    if ((p_msg = (tBTA_DM_REM_NAME *) GKI_getbuf(sizeof(tBTA_DM_REM_NAME))) != NULL)
+    {
+        bdcpy (p_msg->result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+        BCM_STRNCPY_S((char*)p_msg->result.disc_res.bd_name, sizeof(BD_NAME), (char*)p_remote_name->remote_bd_name, (BD_NAME_LEN-1));
+
+        /* make sure the string is null terminated */
+        p_msg->result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+        p_msg->hdr.event = BTA_DM_REMT_NAME_EVT;
+        bta_sys_sendmsg(p_msg);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_authorize_cback
+**
+** Description      cback requesting authorization
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_dm_authorize_cback (BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name,
+                                     UINT8 *service_name, UINT8 service_id, BOOLEAN is_originator)
+{
+    tBTA_DM_SEC sec_event;
+    UINT8       index = 1;
+
+    bdcpy(sec_event.authorize.bd_addr, bd_addr);
+    memcpy(sec_event.authorize.dev_class, dev_class, DEV_CLASS_LEN);
+
+    BCM_STRNCPY_S((char*)sec_event.authorize.bd_name, sizeof(BD_NAME), (char*)bd_name, (BD_NAME_LEN-1));
+
+    /* make sure the string is null terminated */
+    sec_event.authorize.bd_name[BD_NAME_LEN-1] = 0;
+
+#if ( defined(BTA_JV_INCLUDED) && BTA_JV_INCLUDED == TRUE )
+    sec_event.authorize.service = service_id;
+#endif
+
+    while(index < BTA_MAX_SERVICE_ID)
+    {
+        /* get the BTA service id corresponding to BTM id */
+        if(bta_service_id_to_btm_srv_id_lkup_tbl[index] == service_id)
+        {
+            sec_event.authorize.service = index;
+            break;
+        }
+        index++;
+    }
+
+
+    /* if supported service callback otherwise not authorized */
+    if(bta_dm_cb.p_sec_cback && (index < BTA_MAX_SERVICE_ID
+#if ( defined(BTA_JV_INCLUDED) && BTA_JV_INCLUDED == TRUE )
+        /* pass through JV service ID */
+        || (service_id >= BTA_FIRST_JV_SERVICE_ID && service_id <= BTA_LAST_JV_SERVICE_ID)
+#endif
+        ))
+    {
+        bta_dm_cb.p_sec_cback(BTA_DM_AUTHORIZE_EVT, &sec_event);
+        return BTM_CMD_STARTED;
+    }
+    else
+    {
+        return BTM_NOT_AUTHORIZED;
+    }
+}
+
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_pinname_cback
+**
+** Description      Callback requesting pin_key
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pinname_cback (void *p_data)
+{
+    tBTM_REMOTE_DEV_NAME *p_result = (tBTM_REMOTE_DEV_NAME *)p_data;
+    tBTA_DM_SEC           sec_event;
+    UINT32                bytes_to_copy;
+    tBTA_DM_SEC_EVT       event = bta_dm_cb.pin_evt;
+
+    if (BTA_DM_SP_CFM_REQ_EVT == event)
+    {
+	    /* Retrieved saved device class and bd_addr */
+	    bdcpy(sec_event.cfm_req.bd_addr, bta_dm_cb.pin_bd_addr);
+	    BTA_COPY_DEVICE_CLASS(sec_event.cfm_req.dev_class, bta_dm_cb.pin_dev_class);
+
+	    if (p_result && p_result->status == BTM_SUCCESS)
+	    {
+	        bytes_to_copy = (p_result->length < (BD_NAME_LEN-1))
+            ? p_result->length : (BD_NAME_LEN-1);
+	        memcpy(sec_event.cfm_req.bd_name, p_result->remote_bd_name, bytes_to_copy);
+	        sec_event.pin_req.bd_name[BD_NAME_LEN-1] = 0;
+	    }
+	    else    /* No name found */
+	        sec_event.cfm_req.bd_name[0] = 0;
+
+	    sec_event.key_notif.passkey    = bta_dm_cb.num_val; /* get PIN code numeric number */
+
+        /* 1 additional event data fields for this event */
+        sec_event.cfm_req.just_works = bta_dm_cb.just_works;
+    }
+    else
+    {
+	    /* Retrieved saved device class and bd_addr */
+	    bdcpy(sec_event.pin_req.bd_addr, bta_dm_cb.pin_bd_addr);
+	    BTA_COPY_DEVICE_CLASS(sec_event.pin_req.dev_class, bta_dm_cb.pin_dev_class);
+
+	    if (p_result && p_result->status == BTM_SUCCESS)
+	    {
+	        bytes_to_copy = (p_result->length < (BD_NAME_LEN-1))
+            ? p_result->length : (BD_NAME_LEN-1);
+	        memcpy(sec_event.pin_req.bd_name, p_result->remote_bd_name, bytes_to_copy);
+	        sec_event.pin_req.bd_name[BD_NAME_LEN-1] = 0;
+	    }
+	    else    /* No name found */
+	        sec_event.pin_req.bd_name[0] = 0;
+
+	    event = bta_dm_cb.pin_evt;
+	    sec_event.key_notif.passkey    = bta_dm_cb.num_val; /* get PIN code numeric number */
+    }
+
+    if( bta_dm_cb.p_sec_cback )
+        bta_dm_cb.p_sec_cback(event, &sec_event);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_pin_cback
+**
+** Description      Callback requesting pin_key
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_dm_pin_cback (BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name)
+{
+    tBTA_DM_SEC sec_event;
+
+    if (!bta_dm_cb.p_sec_cback)
+        return BTM_NOT_AUTHORIZED;
+
+    /* If the device name is not known, save bdaddr and devclass and initiate a name request */
+    if (bd_name[0] == 0)
+    {
+        bta_dm_cb.pin_evt = BTA_DM_PIN_REQ_EVT;
+        bdcpy(bta_dm_cb.pin_bd_addr, bd_addr);
+        BTA_COPY_DEVICE_CLASS(bta_dm_cb.pin_dev_class, dev_class);
+        if ((BTM_ReadRemoteDeviceName(bd_addr, bta_dm_pinname_cback)) == BTM_CMD_STARTED)
+            return BTM_CMD_STARTED;
+
+        APPL_TRACE_WARNING0(" bta_dm_pin_cback() -> Failed to start Remote Name Request  ");
+    }
+
+    bdcpy(sec_event.pin_req.bd_addr, bd_addr);
+    BTA_COPY_DEVICE_CLASS(sec_event.pin_req.dev_class, dev_class);
+    BCM_STRNCPY_S((char*)sec_event.pin_req.bd_name, sizeof(BD_NAME), (char*)bd_name, (BD_NAME_LEN-1));
+    sec_event.pin_req.bd_name[BD_NAME_LEN-1] = 0;
+
+    bta_dm_cb.p_sec_cback(BTA_DM_PIN_REQ_EVT, &sec_event);
+    return BTM_CMD_STARTED;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_link_key_request_cback
+**
+** Description      Callback requesting linkkey
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8  bta_dm_link_key_request_cback (BD_ADDR bd_addr, LINK_KEY key)
+{
+    /* Application passes all link key to
+    BTM during initialization using add_device
+    API. If BTM doesn't have the link key in it's
+    data base, that's because application doesn't
+    it */
+
+    return BTM_NOT_AUTHORIZED;
+}
+
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_new_link_key_cback
+**
+** Description      Callback from BTM to notify new link key
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8  bta_dm_new_link_key_cback(BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                        BD_NAME bd_name, LINK_KEY key, UINT8 key_type)
+{
+    tBTA_DM_SEC sec_event;
+    tBTA_DM_AUTH_CMPL *p_auth_cmpl;
+    UINT8             event;
+
+    memset (&sec_event, 0, sizeof(tBTA_DM_SEC));
+
+    /* Not AMP Key type */
+    if (key_type != HCI_LKEY_TYPE_AMP_WIFI && key_type != HCI_LKEY_TYPE_AMP_UWB)
+    {
+        event = BTA_DM_AUTH_CMPL_EVT;
+        p_auth_cmpl = &sec_event.auth_cmpl;
+
+        bdcpy(p_auth_cmpl->bd_addr, bd_addr);
+
+        memcpy(p_auth_cmpl->bd_name, bd_name, (BD_NAME_LEN-1));
+        p_auth_cmpl->bd_name[BD_NAME_LEN-1] = 0;
+
+        p_auth_cmpl->key_present = TRUE;
+        p_auth_cmpl->key_type = key_type;
+        p_auth_cmpl->success = TRUE;
+
+        memcpy(p_auth_cmpl->key, key, LINK_KEY_LEN);
+        sec_event.auth_cmpl.fail_reason = HCI_SUCCESS;
+
+        if(bta_dm_cb.p_sec_cback)
+        {
+            bta_dm_cb.p_sec_cback(event, &sec_event);
+        }
+    }
+    else
+    {
+        APPL_TRACE_WARNING0(" bta_dm_new_link_key_cback() Received AMP Key??  ");
+    }
+
+    return BTM_CMD_STARTED;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_authentication_complete_cback
+**
+** Description      Authentication complete callback from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_dm_authentication_complete_cback(BD_ADDR bd_addr, DEV_CLASS dev_class,BD_NAME bd_name, int result)
+{
+
+    tBTA_DM_SEC sec_event;
+
+    if(result != BTM_SUCCESS)
+    {
+        memset(&sec_event, 0, sizeof(tBTA_DM_SEC));
+        bdcpy(sec_event.auth_cmpl.bd_addr, bd_addr);
+
+        memcpy(sec_event.auth_cmpl.bd_name, bd_name, (BD_NAME_LEN-1));
+        sec_event.auth_cmpl.bd_name[BD_NAME_LEN-1] = 0;
+
+/*      taken care of by memset [above]
+        sec_event.auth_cmpl.key_present = FALSE;
+        sec_event.auth_cmpl.success = FALSE;
+*/
+        sec_event.auth_cmpl.fail_reason = (UINT8)result;
+        if(bta_dm_cb.p_sec_cback)
+        {
+            bta_dm_cb.p_sec_cback(BTA_DM_AUTH_CMPL_EVT, &sec_event);
+        }
+    }
+
+    return BTM_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sp_cback
+**
+** Description      simple pairing callback from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_dm_sp_cback (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data)
+{
+    tBTM_STATUS status = BTM_CMD_STARTED;
+    tBTA_DM_SEC sec_event;
+    tBTA_DM_SEC_EVT pin_evt = BTA_DM_SP_KEY_NOTIF_EVT;
+
+    APPL_TRACE_EVENT1("bta_dm_sp_cback: %d", event);
+    if (!bta_dm_cb.p_sec_cback)
+        return BTM_NOT_AUTHORIZED;
+
+    /* TODO_SP */
+    switch(event)
+    {
+    case BTM_SP_IO_REQ_EVT:
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+        /* translate auth_req */
+        bta_dm_co_io_req(p_data->io_req.bd_addr, &p_data->io_req.io_cap,
+            &p_data->io_req.oob_data, &p_data->io_req.auth_req, p_data->io_req.is_orig);
+#endif
+#if BTM_OOB_INCLUDED == FALSE
+        status = BTM_SUCCESS;
+#endif
+
+        APPL_TRACE_EVENT2("io mitm: %d oob_data:%d", p_data->io_req.auth_req, p_data->io_req.oob_data);
+        break;
+    case BTM_SP_IO_RSP_EVT:
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+        bta_dm_co_io_rsp(p_data->io_rsp.bd_addr, p_data->io_rsp.io_cap,
+                         p_data->io_rsp.oob_data, p_data->io_rsp.auth_req );
+#endif
+        break;
+
+    case BTM_SP_CFM_REQ_EVT:
+        pin_evt = BTA_DM_SP_CFM_REQ_EVT;
+        bta_dm_cb.just_works = sec_event.cfm_req.just_works = p_data->cfm_req.just_works;
+        sec_event.cfm_req.loc_auth_req = p_data->cfm_req.loc_auth_req;
+        sec_event.cfm_req.rmt_auth_req = p_data->cfm_req.rmt_auth_req;
+        sec_event.cfm_req.loc_io_caps = p_data->cfm_req.loc_io_caps;
+        sec_event.cfm_req.rmt_io_caps = p_data->cfm_req.rmt_io_caps;
+        /* continue to next case */
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+    /* Passkey entry mode, mobile device with output capability is very
+        unlikely to receive key request, so skip this event */
+    /*case BTM_SP_KEY_REQ_EVT: */
+    case BTM_SP_KEY_NOTIF_EVT:
+#endif
+        bta_dm_cb.num_val = sec_event.key_notif.passkey = p_data->key_notif.passkey;
+        /* If the device name is not known, save bdaddr and devclass and initiate a name request */
+        if (p_data->key_notif.bd_name[0] == 0)
+        {
+            bta_dm_cb.pin_evt = pin_evt;
+            bdcpy(bta_dm_cb.pin_bd_addr, p_data->key_notif.bd_addr);
+            BTA_COPY_DEVICE_CLASS(bta_dm_cb.pin_dev_class, p_data->key_notif.dev_class);
+            if ((BTM_ReadRemoteDeviceName(p_data->key_notif.bd_addr, bta_dm_pinname_cback)) == BTM_CMD_STARTED)
+                return BTM_CMD_STARTED;
+
+            APPL_TRACE_WARNING0(" bta_dm_sp_cback() -> Failed to start Remote Name Request  ");
+        }
+        bdcpy(sec_event.key_notif.bd_addr, p_data->key_notif.bd_addr);
+        BTA_COPY_DEVICE_CLASS(sec_event.key_notif.dev_class, p_data->key_notif.dev_class);
+            BCM_STRNCPY_S((char*)sec_event.key_notif.bd_name, sizeof(BD_NAME), (char*)p_data->key_notif.bd_name, (BD_NAME_LEN-1));
+            sec_event.key_notif.bd_name[BD_NAME_LEN-1] = 0;
+
+        bta_dm_cb.p_sec_cback(pin_evt, &sec_event);
+
+        break;
+
+#if BTM_OOB_INCLUDED == TRUE
+    case BTM_SP_LOC_OOB_EVT:
+        bta_dm_co_loc_oob((BOOLEAN)(p_data->loc_oob.status == BTM_SUCCESS),
+            p_data->loc_oob.c, p_data->loc_oob.r);
+        break;
+
+    case BTM_SP_RMT_OOB_EVT:
+        /* If the device name is not known, save bdaddr and devclass and initiate a name request */
+        if (p_data->rmt_oob.bd_name[0] == 0)
+        {
+            bta_dm_cb.pin_evt = BTA_DM_SP_RMT_OOB_EVT;
+            bdcpy(bta_dm_cb.pin_bd_addr, p_data->rmt_oob.bd_addr);
+            BTA_COPY_DEVICE_CLASS(bta_dm_cb.pin_dev_class, p_data->rmt_oob.dev_class);
+            if ((BTM_ReadRemoteDeviceName(p_data->rmt_oob.bd_addr, bta_dm_pinname_cback)) == BTM_CMD_STARTED)
+                return BTM_CMD_STARTED;
+
+            APPL_TRACE_WARNING0(" bta_dm_sp_cback() -> Failed to start Remote Name Request  ");
+        }
+        bdcpy(sec_event.rmt_oob.bd_addr, p_data->rmt_oob.bd_addr);
+        BTA_COPY_DEVICE_CLASS(sec_event.rmt_oob.dev_class, p_data->rmt_oob.dev_class);
+            BCM_STRNCPY_S((char*)sec_event.rmt_oob.bd_name, sizeof(BD_NAME), (char*)p_data->rmt_oob.bd_name, (BD_NAME_LEN-1));
+            sec_event.rmt_oob.bd_name[BD_NAME_LEN-1] = 0;
+
+        bta_dm_cb.p_sec_cback(BTA_DM_SP_RMT_OOB_EVT, &sec_event);
+
+        bta_dm_co_rmt_oob(p_data->rmt_oob.bd_addr);
+        break;
+#endif
+    case BTM_SP_COMPLT_EVT:
+        /* do not report this event - handled by link_key_callback or auth_complete_callback */
+        break;
+
+    case BTM_SP_KEYPRESS_EVT:
+        memcpy(&sec_event.key_press, &p_data->key_press, sizeof(tBTM_SP_KEYPRESS));
+        bta_dm_cb.p_sec_cback(BTA_DM_SP_KEYPRESS_EVT, &sec_event);
+        break;
+
+    case BTM_SP_UPGRADE_EVT:
+        bta_dm_co_lk_upgrade(p_data->upgrade.bd_addr, &p_data->upgrade.upgrade );
+        break;
+
+    default:
+        status = BTM_NOT_AUTHORIZED;
+        break;
+    }
+    APPL_TRACE_EVENT1("dm status: %d", status);
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_local_name_cback
+**
+** Description      Callback from btm after local name is read
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_local_name_cback(UINT8 *p_name)
+{
+    tBTA_DM_SEC sec_event;
+
+    BTM_GetLocalDeviceAddr(sec_event.enable.bd_addr);
+    sec_event.enable.status = BTA_SUCCESS;
+
+    if(bta_dm_cb.p_sec_cback)
+        bta_dm_cb.p_sec_cback(BTA_DM_ENABLE_EVT, &sec_event);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_signal_strength
+**
+** Description      Callback from btm after local bdaddr is read
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_signal_strength(tBTA_DM_MSG *p_data)
+{
+
+    if(p_data->sig_strength.start)
+    {
+        bta_dm_cb.signal_strength_mask = p_data->sig_strength.mask;
+        bta_dm_cb.signal_strength_period = p_data->sig_strength.period;
+        bta_dm_signal_strength_timer_cback(NULL);
+    }
+    else
+    {
+        bta_sys_stop_timer(&bta_dm_cb.signal_strength_timer);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         bta_dm_signal_strength_timer_cback
+**
+** Description      Periodic timer callback to read signal strength
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_signal_strength_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+
+    UINT8 i;
+
+    if(bta_dm_cb.signal_strength_mask & BTA_SIG_STRENGTH_RSSI_MASK)
+    {
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            BTM_ReadRSSI (bta_dm_cb.device_list.peer_device[i].peer_bdaddr, (tBTM_CMPL_CB *)bta_dm_rssi_cback);
+
+        }
+    }
+    if(bta_dm_cb.signal_strength_mask & BTA_SIG_STRENGTH_LINK_QUALITY_MASK)
+    {
+
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            BTM_ReadLinkQuality (bta_dm_cb.device_list.peer_device[i].peer_bdaddr, (tBTM_CMPL_CB *)bta_dm_link_quality_cback);
+        }
+
+    }
+
+    if(bta_dm_cb.signal_strength_period)
+    {
+        bta_dm_cb.signal_strength_timer.p_cback = (TIMER_CBACK*)&bta_dm_signal_strength_timer_cback;
+        bta_sys_start_timer(&bta_dm_cb.signal_strength_timer, 0, (UINT32)1000*bta_dm_cb.signal_strength_period);
+    }
+}
+
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_bl_change_cback
+**
+** Description      Callback from btm when acl connection goes up or down
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_bl_change_cback (tBTM_BL_EVENT_DATA *p_data)
+{
+
+    tBTA_DM_ACL_CHANGE * p_msg;
+
+    if ((p_msg = (tBTA_DM_ACL_CHANGE *) GKI_getbuf(sizeof(tBTA_DM_ACL_CHANGE))) != NULL)
+    {
+        p_msg->event = p_data->event;
+        p_msg->is_new = FALSE;
+
+        switch(p_msg->event)
+        {
+        case BTM_BL_CONN_EVT:
+            p_msg->is_new = TRUE;
+            bdcpy(p_msg->bd_addr, p_data->conn.p_bda);
+            break;
+        case BTM_BL_DISCN_EVT:
+            bdcpy(p_msg->bd_addr, p_data->discn.p_bda);
+            break;
+        case BTM_BL_UPDATE_EVT:
+            p_msg->busy_level = p_data->update.busy_level;
+            break;
+        case BTM_BL_ROLE_CHG_EVT:
+            p_msg->new_role = p_data->role_chg.new_role;
+            p_msg->hci_status = p_data->role_chg.hci_status;
+            bdcpy(p_msg->bd_addr, p_data->role_chg.p_bda);
+            break;
+            case BTM_BL_COLLISION_EVT:
+                bdcpy(p_msg->bd_addr, p_data->conn.p_bda);
+                break;;
+        }
+
+        p_msg->hdr.event = BTA_DM_ACL_CHANGE_EVT;
+        bta_sys_sendmsg(p_msg);
+
+    }
+
+}
+#else
+
+/*******************************************************************************
+**
+** Function         bta_dm_acl_change_cback
+**
+** Description      Callback from btm when acl connection goes up or down
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_acl_change_cback (BD_ADDR p_bda, DEV_CLASS p_dc, BD_NAME p_bdn,
+                                     BD_FEATURES features, BOOLEAN is_new)
+{
+
+    tBTA_DM_ACL_CHANGE * p_msg;
+
+    if ((p_msg = (tBTA_DM_ACL_CHANGE *) GKI_getbuf(sizeof(tBTA_DM_ACL_CHANGE))) != NULL)
+    {
+        bdcpy (p_msg->bd_addr, p_bda);
+        p_msg->is_new = is_new;
+
+        /* This is collision case */
+        if (features != NULL)
+        {
+            if ((features[0] == 0xFF) && !is_new)
+                p_msg->event = BTM_BL_COLLISION_EVT;
+        }
+
+        p_msg->hdr.event = BTA_DM_ACL_CHANGE_EVT;
+        bta_sys_sendmsg(p_msg);
+
+    }
+
+}
+#endif
+/*******************************************************************************
+**
+** Function         bta_dm_rs_cback
+**
+** Description      Receives the role switch complete event
+**
+** Returns
+**
+*******************************************************************************/
+static void bta_dm_rs_cback (tBTM_ROLE_SWITCH_CMPL *p1)
+{
+    APPL_TRACE_WARNING1("bta_dm_rs_cback:%d", bta_dm_cb.rs_event);
+    if(bta_dm_cb.rs_event == BTA_DM_API_SEARCH_EVT)
+    {
+        bta_dm_cb.search_msg.rs_res = BTA_DM_RS_OK; /* do not care about the result for now */
+        bta_dm_cb.rs_event = 0;
+        bta_dm_search_start((tBTA_DM_MSG *)&bta_dm_cb.search_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_check_av
+**
+** Description      This function checks if AV is active
+**                  if yes, make sure the AV link is master
+**
+** Returns          BOOLEAN - TRUE, if switch is in progress
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_check_av(UINT16 event)
+{
+    BOOLEAN switching = FALSE;
+    UINT8 i;
+    tBTA_DM_PEER_DEVICE *p_dev;
+
+    APPL_TRACE_WARNING1("bta_dm_check_av:%d", bta_dm_cb.cur_av_count);
+    if(bta_dm_cb.cur_av_count)
+    {
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            p_dev = &bta_dm_cb.device_list.peer_device[i];
+            APPL_TRACE_WARNING3("[%d]: state:%d, info:x%x", i, p_dev->conn_state, p_dev->info);
+            if((p_dev->conn_state == BTA_DM_CONNECTED) && (p_dev->info & BTA_DM_DI_AV_ACTIVE))
+            {
+                /* make master and take away the role switch policy */
+                if(BTM_CMD_STARTED == BTM_SwitchRole (p_dev->peer_bdaddr, HCI_ROLE_MASTER, (tBTM_CMPL_CB *)bta_dm_rs_cback))
+                {
+                    /* the role switch command is actually sent */
+                    bta_dm_cb.rs_event = event;
+                    switching = TRUE;
+                }
+                /* else either already master or can not switch for some reasons */
+                bta_dm_policy_cback(BTA_SYS_PLCY_CLR, 0, HCI_ENABLE_MASTER_SLAVE_SWITCH, p_dev->peer_bdaddr);
+                break;
+            }
+        }
+    }
+    return switching;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_acl_change
+**
+** Description      Process BTA_DM_ACL_CHANGE_EVT
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_acl_change(tBTA_DM_MSG *p_data)
+{
+
+    UINT8 i;
+    UINT8 *p;
+    tBTA_DM_SEC conn;
+    BOOLEAN is_new = p_data->acl_change.is_new;
+    BD_ADDR_PTR     p_bda = p_data->acl_change.bd_addr;
+    BOOLEAN         need_policy_change = FALSE;
+    BOOLEAN         issue_unpair_cb = FALSE;
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTA_DM_PEER_DEVICE *p_dev;
+
+    switch(p_data->acl_change.event)
+    {
+    case BTM_BL_UPDATE_EVT:     /* busy level update */
+        if( bta_dm_cb.p_sec_cback )
+        {
+            conn.busy_level.level = p_data->acl_change.busy_level;
+            bta_dm_cb.p_sec_cback(BTA_DM_BUSY_LEVEL_EVT, &conn);
+        }
+        return;
+
+    case BTM_BL_ROLE_CHG_EVT:   /* role change event */
+        p_dev = bta_dm_find_peer_device(p_bda);
+        if(p_dev)
+        {
+            APPL_TRACE_DEBUG3("bta_dm_acl_change role chg info:x%x new_role:%d dev count:%d",
+                p_dev->info, p_data->acl_change.new_role, bta_dm_cb.device_list.count);
+            if(p_dev->info & BTA_DM_DI_AV_ACTIVE)
+            {
+                /* there's AV activity on this link */
+                if(p_data->acl_change.new_role == HCI_ROLE_SLAVE && bta_dm_cb.device_list.count > 1
+                    && p_data->acl_change.hci_status == HCI_SUCCESS)
+                {
+                    /* more than one connections and the AV connection is role switched to slave
+                     * switch it back to master and remove the switch policy */
+                    BTM_SwitchRole(p_bda, BTM_ROLE_MASTER, NULL);
+                    need_policy_change = TRUE;
+                }
+                else if (bta_dm_cfg.avoid_scatter && (p_data->acl_change.new_role == HCI_ROLE_MASTER))
+                {
+                    /* if the link updated to be master include AV activities, remove the switch policy */
+                    need_policy_change = TRUE;
+                }
+
+                if(need_policy_change)
+                {
+                    bta_dm_policy_cback(BTA_SYS_PLCY_CLR, 0, HCI_ENABLE_MASTER_SLAVE_SWITCH, p_dev->peer_bdaddr);
+                }
+            }
+            else
+            {
+                /* there's AV no activity on this link and role switch happened
+                 * check if AV is active
+                 * if so, make sure the AV link is master */
+                bta_dm_check_av(0);
+            }
+            bta_sys_notify_role_chg(p_data->acl_change.bd_addr, p_data->acl_change.new_role, p_data->acl_change.hci_status);
+            bdcpy(conn.role_chg.bd_addr, p_bda);
+            conn.role_chg.new_role = (UINT8) p_data->acl_change.new_role;
+            if( bta_dm_cb.p_sec_cback )
+                bta_dm_cb.p_sec_cback(BTA_DM_ROLE_CHG_EVT, &conn);
+        }
+        return;
+    }
+#endif
+
+    /* Collision report from Stack: Notify profiles */
+    if (p_data->acl_change.event == BTM_BL_COLLISION_EVT)
+    {
+        bta_sys_notify_collision (p_bda);
+        return;
+    }
+
+    if(is_new)
+    {
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            if(!bdcmp( bta_dm_cb.device_list.peer_device[i].peer_bdaddr, p_bda))
+                break;
+
+        }
+
+        if(i == bta_dm_cb.device_list.count)
+        {
+            bdcpy(bta_dm_cb.device_list.peer_device[bta_dm_cb.device_list.count].peer_bdaddr, p_bda);
+            bta_dm_cb.device_list.peer_device[bta_dm_cb.device_list.count].link_policy = bta_dm_cb.cur_policy;
+            bta_dm_cb.device_list.count++;
+        }
+
+        bta_dm_cb.device_list.peer_device[i].conn_state = BTA_DM_CONNECTED;
+        bta_dm_cb.device_list.peer_device[i].pref_role = BTA_ANY_ROLE;
+        bdcpy(conn.link_up.bd_addr, p_bda);
+        bta_dm_cb.device_list.peer_device[i].info = BTA_DM_DI_NONE;
+        if( ((NULL != (p = BTM_ReadLocalFeatures ())) && HCI_SNIFF_SUB_RATE_SUPPORTED(p)) &&
+            ((NULL != (p = BTM_ReadRemoteFeatures (p_bda))) && HCI_SNIFF_SUB_RATE_SUPPORTED(p)) )
+        {
+            /* both local and remote devices support SSR */
+            bta_dm_cb.device_list.peer_device[i].info = BTA_DM_DI_USE_SSR;
+        }
+        APPL_TRACE_WARNING1("info:x%x", bta_dm_cb.device_list.peer_device[i].info);
+        if( bta_dm_cb.p_sec_cback )
+            bta_dm_cb.p_sec_cback(BTA_DM_LINK_UP_EVT, &conn);
+
+    }
+    else
+    {
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            if(bdcmp( bta_dm_cb.device_list.peer_device[i].peer_bdaddr, p_bda))
+                continue;
+
+            if( bta_dm_cb.device_list.peer_device[i].conn_state == BTA_DM_UNPAIRING )
+            {
+                BTM_SecDeleteDevice(bta_dm_cb.device_list.peer_device[i].peer_bdaddr);
+                issue_unpair_cb = TRUE;
+            }
+
+            for(; i<bta_dm_cb.device_list.count ; i++)
+            {
+                memcpy(&bta_dm_cb.device_list.peer_device[i], &bta_dm_cb.device_list.peer_device[i+1], sizeof(bta_dm_cb.device_list.peer_device[i]));
+            }
+            break;
+        }
+        if(bta_dm_cb.device_list.count)
+            bta_dm_cb.device_list.count--;
+
+        if(bta_dm_search_cb.wait_disc && !bdcmp(bta_dm_search_cb.peer_bdaddr, p_bda))
+        {
+            bta_dm_search_cb.wait_disc = FALSE;
+
+            if(bta_dm_search_cb.sdp_results)
+            {
+                APPL_TRACE_EVENT0(" timer stopped  ");
+                bta_sys_stop_timer(&bta_dm_search_cb.search_timer);
+                bta_dm_discover_next_device();
+            }
+
+        }
+
+        if(bta_dm_cb.disabling)
+        {
+            if(!BTM_GetNumAclLinks())
+            {
+                bta_sys_stop_timer(&bta_dm_cb.disable_timer);
+                bta_dm_cb.disable_timer.p_cback = (TIMER_CBACK*)&bta_dm_disable_conn_down_timer_cback;
+                /* start a timer to make sure that the profiles get the disconnect event */
+                bta_sys_start_timer(&bta_dm_cb.disable_timer, 0, 1000);
+            }
+        }
+
+        bdcpy(conn.link_down.bd_addr, p_bda);
+        conn.link_down.status = (UINT8) btm_get_acl_disc_reason_code();
+        if( bta_dm_cb.p_sec_cback )
+        {
+            bta_dm_cb.p_sec_cback(BTA_DM_LINK_DOWN_EVT, &conn);
+            if( issue_unpair_cb )
+                bta_dm_cb.p_sec_cback(BTA_DM_DEV_UNPAIRED_EVT, &conn);
+        }
+    }
+
+    bta_dm_adjust_roles(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_disable_conn_down_timer_cback
+**
+** Description      Sends disable event to application
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_disable_conn_down_timer_cback (TIMER_LIST_ENT *p_tle)
+{
+    tBTA_SYS_HW_MSG *sys_enable_event;
+
+    /* register our callback to SYS HW manager */
+    bta_sys_hw_register( BTA_SYS_HW_BLUETOOTH, bta_dm_sys_hw_cback );
+
+    /* send a message to BTA SYS */
+    if ((sys_enable_event = (tBTA_SYS_HW_MSG *) GKI_getbuf(sizeof(tBTA_SYS_HW_MSG))) != NULL)
+    {
+        sys_enable_event->hdr.event = BTA_SYS_API_DISABLE_EVT;
+        sys_enable_event->hw_module = BTA_SYS_HW_BLUETOOTH;
+        bta_sys_sendmsg(sys_enable_event);
+    }
+
+    bta_dm_cb.disabling = FALSE;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_rssi_cback
+**
+** Description      Callback from btm with rssi values
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_rssi_cback (tBTM_RSSI_RESULTS *p_result)
+{
+    tBTA_DM_SEC sec_event;
+
+    if(p_result->status == BTM_SUCCESS)
+    {
+
+        bdcpy(sec_event.sig_strength.bd_addr, p_result->rem_bda);
+        sec_event.sig_strength.mask = BTA_SIG_STRENGTH_RSSI_MASK;
+        sec_event.sig_strength.rssi_value = p_result->rssi;
+        if( bta_dm_cb.p_sec_cback!= NULL )
+            bta_dm_cb.p_sec_cback(BTA_DM_SIG_STRENGTH_EVT, &sec_event);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_link_quality_cback
+**
+** Description      Callback from btm with link quality value
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_link_quality_cback (tBTM_LINK_QUALITY_RESULTS *p_result)
+{
+
+    tBTA_DM_SEC sec_event;
+
+    if(p_result->status == BTM_SUCCESS)
+    {
+
+        bdcpy(sec_event.sig_strength.bd_addr, p_result->rem_bda);
+        sec_event.sig_strength.mask = BTA_SIG_STRENGTH_LINK_QUALITY_MASK;
+        sec_event.sig_strength.link_quality_value = p_result->link_quality;
+        if( bta_dm_cb.p_sec_cback!= NULL )
+            bta_dm_cb.p_sec_cback(BTA_DM_SIG_STRENGTH_EVT, &sec_event);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_rm_cback
+**
+** Description      Role management callback from sys
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_rm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+
+    UINT8 j;
+    tBTA_PREF_ROLES role;
+    tBTA_DM_PEER_DEVICE *p_dev;
+
+    p_dev = bta_dm_find_peer_device(peer_addr);
+    if( status == BTA_SYS_CONN_OPEN)
+    {
+        if(p_dev)
+        {
+            /* Do not set to connected if we are in the middle of unpairing. When AV stream is
+             * started it fakes out a SYS_CONN_OPEN to potentially trigger a role switch command.
+             * But this should not be done if we are in the middle of unpairing.
+             */
+            if (p_dev->conn_state != BTA_DM_UNPAIRING)
+                p_dev->conn_state = BTA_DM_CONNECTED;
+
+            for(j=1; j<= p_bta_dm_rm_cfg[0].app_id; j++)
+            {
+                if(((p_bta_dm_rm_cfg[j].app_id == app_id) || (p_bta_dm_rm_cfg[j].app_id == BTA_ALL_APP_ID))
+                    && (p_bta_dm_rm_cfg[j].id == id))
+                {
+                    role = p_bta_dm_rm_cfg[j].cfg;
+
+                    if(role > p_dev->pref_role )
+                        p_dev->pref_role = role;
+                    break;
+                }
+            }
+
+        }
+
+    }
+
+    if((BTA_ID_AV == id)||(BTA_ID_AVK ==id))
+    {
+        if( status == BTA_SYS_CONN_BUSY)
+        {
+            if(p_dev)
+                p_dev->info |= BTA_DM_DI_AV_ACTIVE;
+            /* AV calls bta_sys_conn_open with the A2DP stream count as app_id */
+            if(BTA_ID_AV == id)
+                bta_dm_cb.cur_av_count = app_id;
+        }
+        else if( status == BTA_SYS_CONN_IDLE)
+        {
+            if(p_dev)
+                p_dev->info &= ~BTA_DM_DI_AV_ACTIVE;
+            /* AV calls bta_sys_conn_open with the A2DP stream count as app_id */
+            if(BTA_ID_AV == id)
+                bta_dm_cb.cur_av_count = app_id;
+        }
+        APPL_TRACE_WARNING2("bta_dm_rm_cback:%d, status:%d", bta_dm_cb.cur_av_count, status);
+    }
+
+
+    bta_dm_adjust_roles(FALSE);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_dev_blacklisted_for_switch
+**
+** Description      Checks if the device is blacklisted for immediate role switch after connection.
+**
+** Returns          TRUE if dev is blacklisted else FALSE
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_dev_blacklisted_for_switch (BD_ADDR remote_bd_addr)
+{
+    UINT16 manufacturer = 0;
+    UINT16  lmp_sub_version = 0;
+    UINT8 lmp_version = 0;
+    UINT8 i = 0;
+
+    if (BTM_ReadRemoteVersion(remote_bd_addr, &lmp_version,
+        &manufacturer, &lmp_sub_version) == BTM_SUCCESS)
+    {
+        /* Check if this device version info matches with is
+           blacklisted versions for role switch  */
+        for (i = 0; i < BTA_DM_MAX_ROLE_SWITCH_BLACKLIST_COUNT; i++)
+        {
+             if ((bta_role_switch_blacklist[i].lmp_version == lmp_version) &&
+                 (bta_role_switch_blacklist[i].manufacturer == manufacturer)&&
+                 ((bta_role_switch_blacklist[i].lmp_sub_version & lmp_sub_version) ==
+                     bta_role_switch_blacklist[i].lmp_sub_version))
+                {
+                    APPL_TRACE_EVENT0("Black list F/W version matches.. Delay Role Switch...");
+                    return TRUE;
+                }
+
+        }
+    }
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_delay_role_switch_cback
+**
+** Description      Callback from btm to delay a role switch
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_delay_role_switch_cback(TIMER_LIST_ENT *p_tle)
+{
+    APPL_TRACE_EVENT0("bta_dm_delay_role_switch_cback: initiating Delayed RS");
+    bta_dm_adjust_roles (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_adjust_roles
+**
+** Description      Adjust roles
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_adjust_roles(BOOLEAN delay_role_switch)
+{
+
+    UINT8 i;
+    BOOLEAN set_master_role = FALSE;
+
+    if(bta_dm_cb.device_list.count)
+    {
+
+        /* the configuration is no scatternet
+         * or AV connection exists and there are more than one ACL link */
+        if( (p_bta_dm_rm_cfg[0].cfg == BTA_DM_NO_SCATTERNET) ||
+            (bta_dm_cb.cur_av_count && bta_dm_cb.device_list.count > 1) )
+        {
+
+            L2CA_SetDesireRole (HCI_ROLE_MASTER);
+            set_master_role = TRUE;
+
+        }
+
+        for(i=0; i<bta_dm_cb.device_list.count; i++)
+        {
+            if(bta_dm_cb.device_list.peer_device[i].conn_state == BTA_DM_CONNECTED)
+            {
+                if(!set_master_role && (bta_dm_cb.device_list.peer_device[i].pref_role != BTA_ANY_ROLE)
+                    && (p_bta_dm_rm_cfg[0].cfg == BTA_DM_PARTIAL_SCATTERNET))
+                {
+                    L2CA_SetDesireRole (HCI_ROLE_MASTER);
+                    set_master_role = TRUE;
+                }
+
+                if((bta_dm_cb.device_list.peer_device[i].pref_role == BTA_MASTER_ROLE_ONLY)
+                    || (bta_dm_cb.device_list.count > 1))
+                {
+
+                /* Initiating immediate role switch with certain remote devices
+                  has caused issues due to role  switch colliding with link encryption setup and
+                  causing encryption (and in turn the link) to fail .  These device . Firmware
+                  versions are stored in a blacklist and role switch with these devices are
+                  delayed to avoid the collision with link encryption setup */
+
+                    if ((delay_role_switch == FALSE) ||
+                       (bta_dm_dev_blacklisted_for_switch(
+                                       bta_dm_cb.device_list.peer_device[i].peer_bdaddr) == FALSE))
+                    {
+                        BTM_SwitchRole (bta_dm_cb.device_list.peer_device[i].peer_bdaddr,
+                                        HCI_ROLE_MASTER, NULL);
+                    }
+                    else
+                    {
+                        bta_dm_cb.switch_delay_timer.p_cback =
+                            (TIMER_CBACK*)&bta_dm_delay_role_switch_cback;
+                        bta_sys_start_timer(&bta_dm_cb.switch_delay_timer, 0, 500);
+                    }
+                }
+
+            }
+        }
+
+
+        if(!set_master_role)
+        {
+
+            L2CA_SetDesireRole (L2CAP_DESIRED_LINK_ROLE);
+
+        }
+
+    }
+    else
+    {
+        L2CA_SetDesireRole (L2CAP_DESIRED_LINK_ROLE);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_get_remname
+**
+** Description      Returns a pointer to the remote name stored in the DM control
+**                  block if it exists, or from the BTM memory.
+**
+** Returns          char * - Pointer to the remote device name
+*******************************************************************************/
+static char *bta_dm_get_remname(void)
+{
+    char *p_name = bta_dm_search_cb.peer_name;
+    char *p_temp;
+
+    /* If the name isn't already stored, try retrieving from BTM */
+    if (*p_name == '\0')
+        if ((p_temp = BTM_SecReadDevName(bta_dm_search_cb.peer_bdaddr)) != NULL)
+            p_name = p_temp;
+
+    return p_name;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_bond_cancel_complete_cback
+**
+** Description      Authentication complete callback from BTM
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_bond_cancel_complete_cback(tBTM_STATUS result)
+{
+
+    tBTA_DM_SEC sec_event;
+
+    if (result == BTM_SUCCESS)
+        sec_event.bond_cancel_cmpl.result = BTA_SUCCESS;
+    else
+        sec_event.bond_cancel_cmpl.result = BTA_FAILURE;
+
+    if(bta_dm_cb.p_sec_cback)
+    {
+        bta_dm_cb.p_sec_cback(BTA_DM_BOND_CANCEL_CMPL_EVT, &sec_event);
+    }
+}
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )
+    #if ( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+/*******************************************************************************
+**
+** Function         bta_dm_update_eir_uuid
+**
+** Description
+**
+**
+*******************************************************************************/
+void bta_dm_update_eir_uuid (tBTA_DM_MSG *p_data)
+{
+    tBTA_DM_API_UPDATE_EIR_UUID *p_msg = (tBTA_DM_API_UPDATE_EIR_UUID *)p_data;
+    UINT8 xx;
+    UINT8 empty_slot = BTA_EIR_SERVER_NUM_CUSTOM_UUID;
+    UINT8 match_slot = BTA_EIR_SERVER_NUM_CUSTOM_UUID;
+
+    for (xx = 0; xx < BTA_EIR_SERVER_NUM_CUSTOM_UUID; xx++)
+    {
+        if (bta_dm_cb.custom_uuid[xx].len == 0)
+        {
+            if (empty_slot == BTA_EIR_SERVER_NUM_CUSTOM_UUID)
+                empty_slot = xx;
+        }
+        else if (match_slot == BTA_EIR_SERVER_NUM_CUSTOM_UUID)
+        {
+            if (!memcmp (bta_dm_cb.custom_uuid[xx].uu.uuid128, p_msg->uuid.uu.uuid128, p_msg->uuid.len))
+            {
+                match_slot = xx;;
+            }
+        }
+    }
+
+    if (p_msg->is_add)
+    {
+        if (match_slot == BTA_EIR_SERVER_NUM_CUSTOM_UUID)
+        {
+            if (empty_slot == BTA_EIR_SERVER_NUM_CUSTOM_UUID)
+            {
+                APPL_TRACE_ERROR0("No space to add UUID for EIR");
+                return;
+            }
+            else
+            {
+                memcpy (&(bta_dm_cb.custom_uuid[empty_slot]), &(p_msg->uuid), sizeof(tBT_UUID));
+            }
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("UUID is already added for EIR");
+            return;
+        }
+    }
+    else
+    {
+        if (match_slot == BTA_EIR_SERVER_NUM_CUSTOM_UUID)
+        {
+            APPL_TRACE_ERROR0("UUID is not found for EIR");
+            return;
+        }
+        else
+        {
+            memset (&(bta_dm_cb.custom_uuid[match_slot]), 0, sizeof(tBT_UUID));
+        }
+    }
+
+    bta_dm_set_eir (NULL);
+}
+    #endif
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_eir_config
+**
+** Description
+**
+**
+*******************************************************************************/
+void bta_dm_set_eir_config (tBTA_DM_MSG *p_data)
+{
+    if (p_data->set_eir_cfg.p_eir_cfg)
+    {
+        /* User defined config */
+        p_bta_dm_eir_cfg = p_data->set_eir_cfg.p_eir_cfg;
+    }
+    else
+    {
+        /* Back to default config */
+        p_bta_dm_eir_cfg = (tBTA_DM_EIR_CONF*)&bta_dm_eir_cfg;
+    }
+
+    bta_dm_set_eir (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_eir
+**
+** Description      This function creates EIR tagged data and writes it to controller.
+**
+** Returns          None
+**
+*******************************************************************************/
+static void bta_dm_set_eir (char *local_name)
+{
+    BT_HDR   *p_buf;
+    UINT8    *p;
+    UINT8    *p_length;
+#if (BTA_EIR_CANNED_UUID_LIST != TRUE)
+    UINT8    *p_type;
+    UINT8    max_num_uuid;
+#if (BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    UINT8    custom_uuid_idx;
+#endif
+#endif
+#if (BTM_EIR_DEFAULT_FEC_REQUIRED == FALSE)
+    UINT8    free_eir_length = HCI_EXT_INQ_RESPONSE_LEN;
+#else
+    UINT8    free_eir_length = HCI_DM5_PACKET_SIZE;
+#endif
+    UINT8    num_uuid;
+    UINT8    data_type;
+    UINT8    local_name_len;
+
+    /* wait until complete to disable */
+    if (bta_dm_cb.disable_timer.in_use)
+        return;
+
+#if ( BTA_EIR_CANNED_UUID_LIST != TRUE )
+    /* wait until App is ready */
+    if (bta_dm_cb.app_ready_timer.in_use)
+        return;
+
+    /* if local name is not provided, get it from controller */
+    if( local_name == NULL )
+    {
+        if( BTM_ReadLocalDeviceName( &local_name ) != BTM_SUCCESS )
+        {
+            APPL_TRACE_ERROR0("Fail to read local device name for EIR");
+        }
+    }
+#endif
+
+    /* Allocate a buffer to hold HCI command */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf(BTM_CMD_POOL_ID)) == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_dm_set_eir couldn't allocate buffer");
+        return;
+    }
+    p = (UINT8 *)p_buf + BTM_HCI_EIR_OFFSET;
+
+    memset(p, 0x00, HCI_EXT_INQ_RESPONSE_LEN );
+
+    APPL_TRACE_DEBUG0("BTA is generating EIR");
+
+    if( local_name )
+        local_name_len = strlen( local_name );
+    else
+        local_name_len = 0;
+
+    data_type = BTM_EIR_COMPLETE_LOCAL_NAME_TYPE;
+    /* if local name is longer than minimum length of shortened name */
+    /* check whether it needs to be shortened or not */
+    if( local_name_len > p_bta_dm_eir_cfg->bta_dm_eir_min_name_len )
+    {
+        /* get number of UUID 16-bit list */
+#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
+        num_uuid = p_bta_dm_eir_cfg->bta_dm_eir_uuid16_len/LEN_UUID_16;
+#else
+        max_num_uuid = (free_eir_length - 2)/LEN_UUID_16;
+        data_type = BTM_GetEirSupportedServices( bta_dm_cb.eir_uuid, &p,
+                                                 max_num_uuid, &num_uuid );
+        p = (UINT8 *)p_buf + BTM_HCI_EIR_OFFSET; /* reset p */
+#endif
+
+        /* if UUID doesn't fit remaing space, shorten local name */
+        if ( local_name_len > (free_eir_length - 4 - num_uuid*LEN_UUID_16))
+        {
+            APPL_TRACE_WARNING0("BTA EIR: local name is shortened");
+            local_name_len = p_bta_dm_eir_cfg->bta_dm_eir_min_name_len;
+            data_type = BTM_EIR_SHORTENED_LOCAL_NAME_TYPE;
+        }
+        else
+            data_type = BTM_EIR_COMPLETE_LOCAL_NAME_TYPE;
+    }
+
+    UINT8_TO_STREAM(p, local_name_len + 1);
+    UINT8_TO_STREAM(p, data_type);
+    memcpy(p, local_name, local_name_len);
+    p += local_name_len;
+    free_eir_length -= local_name_len + 2;
+
+#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
+    /* if UUID list is provided as static data in configuration */
+    if(( p_bta_dm_eir_cfg->bta_dm_eir_uuid16_len > 0 )
+        &&(p_bta_dm_eir_cfg->bta_dm_eir_uuid16))
+    {
+        if( free_eir_length > LEN_UUID_16 + 2)
+        {
+            free_eir_length -= 2;
+
+            if( free_eir_length >= p_bta_dm_eir_cfg->bta_dm_eir_uuid16_len)
+            {
+                num_uuid = p_bta_dm_eir_cfg->bta_dm_eir_uuid16_len / LEN_UUID_16;
+                data_type = BTM_EIR_COMPLETE_16BITS_UUID_TYPE;
+            }
+            else /* not enough room for all UUIDs */
+            {
+                APPL_TRACE_WARNING0("BTA EIR: UUID 16-bit list is truncated");
+                num_uuid = free_eir_length / LEN_UUID_16;
+                data_type = BTM_EIR_MORE_16BITS_UUID_TYPE;
+            }
+            UINT8_TO_STREAM(p, num_uuid * LEN_UUID_16 + 1);
+            UINT8_TO_STREAM(p, data_type);
+            memcpy(p, p_bta_dm_eir_cfg->bta_dm_eir_uuid16, num_uuid * LEN_UUID_16 );
+            p += num_uuid * LEN_UUID_16;
+            free_eir_length -= num_uuid * LEN_UUID_16;
+        }
+    }
+#else /* (BTA_EIR_CANNED_UUID_LIST == TRUE) */
+    /* if UUID list is dynamic */
+    if ( free_eir_length >= 2)
+    {
+        p_length = p++;
+        p_type   = p++;
+        num_uuid = 0;
+
+        max_num_uuid = (free_eir_length - 2)/LEN_UUID_16;
+        data_type = BTM_GetEirSupportedServices( bta_dm_cb.eir_uuid, &p, max_num_uuid, &num_uuid );
+
+        if( data_type == BTM_EIR_MORE_16BITS_UUID_TYPE )
+        {
+            APPL_TRACE_WARNING0("BTA EIR: UUID 16-bit list is truncated");
+        }
+#if (BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+        else
+        {
+            for (custom_uuid_idx = 0; custom_uuid_idx < BTA_EIR_SERVER_NUM_CUSTOM_UUID; custom_uuid_idx++)
+            {
+                if (bta_dm_cb.custom_uuid[custom_uuid_idx].len == LEN_UUID_16)
+                {
+                    if ( num_uuid < max_num_uuid )
+                    {
+                        UINT16_TO_STREAM(p, bta_dm_cb.custom_uuid[custom_uuid_idx].uu.uuid16);
+                        num_uuid++;
+                    }
+                    else
+                    {
+                        data_type = BTM_EIR_MORE_16BITS_UUID_TYPE;
+                        APPL_TRACE_WARNING0("BTA EIR: UUID 16-bit list is truncated");
+                        break;
+                    }
+                }
+            }
+        }
+#endif /* (BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0) */
+
+        UINT8_TO_STREAM(p_length, num_uuid * LEN_UUID_16 + 1);
+        UINT8_TO_STREAM(p_type, data_type);
+        free_eir_length -= num_uuid * LEN_UUID_16 + 2;
+    }
+#endif /* (BTA_EIR_CANNED_UUID_LIST == TRUE) */
+
+#if ( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    /* Adding 32-bit UUID list */
+    if ( free_eir_length >= 2)
+    {
+        p_length = p++;
+        p_type   = p++;
+        num_uuid = 0;
+        data_type = BTM_EIR_COMPLETE_32BITS_UUID_TYPE;
+
+        max_num_uuid = (free_eir_length - 2)/LEN_UUID_32;
+
+        for (custom_uuid_idx = 0; custom_uuid_idx < BTA_EIR_SERVER_NUM_CUSTOM_UUID; custom_uuid_idx++)
+        {
+            if (bta_dm_cb.custom_uuid[custom_uuid_idx].len == LEN_UUID_32)
+            {
+                if ( num_uuid < max_num_uuid )
+                {
+                    UINT32_TO_STREAM(p, bta_dm_cb.custom_uuid[custom_uuid_idx].uu.uuid32);
+                    num_uuid++;
+                }
+                else
+                {
+                    data_type = BTM_EIR_MORE_32BITS_UUID_TYPE;
+                    APPL_TRACE_WARNING0("BTA EIR: UUID 32-bit list is truncated");
+                    break;
+                }
+            }
+        }
+
+        UINT8_TO_STREAM(p_length, num_uuid * LEN_UUID_32 + 1);
+        UINT8_TO_STREAM(p_type, data_type);
+        free_eir_length -= num_uuid * LEN_UUID_32 + 2;
+    }
+
+    /* Adding 128-bit UUID list */
+    if ( free_eir_length >= 2)
+    {
+        p_length = p++;
+        p_type   = p++;
+        num_uuid = 0;
+        data_type = BTM_EIR_COMPLETE_128BITS_UUID_TYPE;
+
+        max_num_uuid = (free_eir_length - 2)/LEN_UUID_128;
+
+        for (custom_uuid_idx = 0; custom_uuid_idx < BTA_EIR_SERVER_NUM_CUSTOM_UUID; custom_uuid_idx++)
+        {
+            if (bta_dm_cb.custom_uuid[custom_uuid_idx].len == LEN_UUID_128)
+            {
+                if ( num_uuid < max_num_uuid )
+                {
+                    ARRAY16_TO_STREAM(p, bta_dm_cb.custom_uuid[custom_uuid_idx].uu.uuid128);
+                    num_uuid++;
+                }
+                else
+                {
+                    data_type = BTM_EIR_MORE_128BITS_UUID_TYPE;
+                    APPL_TRACE_WARNING0("BTA EIR: UUID 128-bit list is truncated");
+                    break;
+                }
+            }
+        }
+
+        UINT8_TO_STREAM(p_length, num_uuid * LEN_UUID_128 + 1);
+        UINT8_TO_STREAM(p_type, data_type);
+        free_eir_length -= num_uuid * LEN_UUID_128 + 2;
+    }
+#endif /* ( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0) */
+
+    /* if Flags are provided in configuration */
+    if(( p_bta_dm_eir_cfg->bta_dm_eir_flag_len > 0 )
+     &&( p_bta_dm_eir_cfg->bta_dm_eir_flags )
+     &&( free_eir_length >= p_bta_dm_eir_cfg->bta_dm_eir_flag_len + 2 ))
+    {
+        UINT8_TO_STREAM(p, p_bta_dm_eir_cfg->bta_dm_eir_flag_len + 1);
+        UINT8_TO_STREAM(p, BTM_EIR_FLAGS_TYPE);
+        memcpy(p, p_bta_dm_eir_cfg->bta_dm_eir_flags,
+               p_bta_dm_eir_cfg->bta_dm_eir_flag_len);
+        p += p_bta_dm_eir_cfg->bta_dm_eir_flag_len;
+        free_eir_length -= p_bta_dm_eir_cfg->bta_dm_eir_flag_len + 2;
+    }
+
+    /* if Inquiry Tx Resp Power compiled */
+    if((p_bta_dm_eir_cfg->bta_dm_eir_inq_tx_power) &&
+       (free_eir_length >= 3))
+    {
+        UINT8_TO_STREAM(p, 2);      /* Length field */
+        UINT8_TO_STREAM(p, BTM_EIR_TX_POWER_LEVEL_TYPE);
+        UINT8_TO_STREAM(p, *(p_bta_dm_eir_cfg->bta_dm_eir_inq_tx_power));
+        free_eir_length -= 3;
+    }
+
+    /* if Manufacturer Specific are provided in configuration */
+    if(( p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len > 0 )
+     &&( p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec )
+     &&( free_eir_length >= p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len + 2 ))
+    {
+        p_length = p;
+
+        UINT8_TO_STREAM(p, p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len + 1);
+        UINT8_TO_STREAM(p, BTM_EIR_MANUFACTURER_SPECIFIC_TYPE);
+        memcpy(p, p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec,
+               p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len);
+        p += p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len;
+        free_eir_length -= p_bta_dm_eir_cfg->bta_dm_eir_manufac_spec_len + 2;
+
+    }
+    else
+    {
+        p_length = NULL;
+    }
+
+    if( free_eir_length )
+        UINT8_TO_STREAM(p, 0); /* terminator of significant part */
+
+    BTM_WriteEIR( p_buf );
+
+}
+#endif
+
+#if ( BTM_EIR_CLIENT_INCLUDED == TRUE )
+/*******************************************************************************
+**
+** Function         bta_dm_eir_search_services
+**
+** Description      This function searches services in received EIR
+**
+** Returns          None
+**
+*******************************************************************************/
+static void bta_dm_eir_search_services( tBTM_INQ_RESULTS  *p_result,
+                                        tBTA_SERVICE_MASK *p_services_to_search,
+                                        tBTA_SERVICE_MASK *p_services_found)
+{
+    tBTA_SERVICE_MASK       service_index = 0;
+    tBTM_EIR_SEARCH_RESULT  result;
+
+    APPL_TRACE_DEBUG6("BTA searching services in EIR of BDA:0x%02X%02X%02X%02X%02X%02X",
+                        p_result->remote_bd_addr[0],p_result->remote_bd_addr[1],
+                        p_result->remote_bd_addr[2],p_result->remote_bd_addr[3],
+                        p_result->remote_bd_addr[4],p_result->remote_bd_addr[5]);
+
+    APPL_TRACE_DEBUG1("    with services_to_search=0x%08X", *p_services_to_search);
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    /* always do GATT based service discovery by SDP instead of from EIR    */
+    /* if GATT based service is also to be put in EIR, need to modify this  */
+    while (service_index < (BTA_MAX_SERVICE_ID - 1))
+#else
+    while(service_index < BTA_MAX_SERVICE_ID)
+#endif
+    {
+        if( *p_services_to_search
+           & (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(service_index)))
+        {
+            result = BTM_HasInquiryEirService( p_result,
+                                               bta_service_id_to_uuid_lkup_tbl[service_index] );
+
+            /* Searching for HSP v1.2 only device */
+            if ((result != BTM_EIR_FOUND) &&
+                (bta_service_id_to_uuid_lkup_tbl[service_index] == UUID_SERVCLASS_HEADSET))
+            {
+                result = BTM_HasInquiryEirService (p_result, UUID_SERVCLASS_HEADSET_HS);
+            }
+
+            if( result == BTM_EIR_FOUND )
+            {
+                /* If Plug and Play service record, need to check to see if Broadcom stack */
+                /* However, EIR data doesn't have EXT_BRCM_VERSION so just skip it */
+                if( bta_service_id_to_uuid_lkup_tbl[service_index]
+                    != UUID_SERVCLASS_PNP_INFORMATION )
+                {
+
+                    *p_services_found |=
+                       (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(service_index));
+                    /* remove the service from services to be searched  */
+                    *p_services_to_search &=
+                       (tBTA_SERVICE_MASK)(~(BTA_SERVICE_ID_TO_SERVICE_MASK(service_index)));
+                }
+            }
+            else if( result == BTM_EIR_NOT_FOUND )
+            {
+                /* remove the service from services to be searched  */
+                *p_services_to_search &=
+                       (tBTA_SERVICE_MASK)(~(BTA_SERVICE_ID_TO_SERVICE_MASK(service_index)));
+            }
+        }
+
+        service_index++;
+    }
+
+    APPL_TRACE_ERROR2("BTA EIR search result, services_to_search=0x%08X, services_found=0x%08X",
+                        *p_services_to_search, *p_services_found);
+}
+#endif
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_eir_update_uuid
+**
+** Description      This function adds or removes service UUID in EIR database.
+**
+** Returns          None
+**
+*******************************************************************************/
+void bta_dm_eir_update_uuid(UINT16 uuid16, BOOLEAN adding)
+{
+    /* if this UUID is not advertised in EIR */
+    if( !BTM_HasEirService( p_bta_dm_eir_cfg->uuid_mask, uuid16 ))
+        return;
+
+    if( adding )
+    {
+        APPL_TRACE_EVENT1("Adding UUID=0x%04X into EIR", uuid16);
+
+        BTM_AddEirService( bta_dm_cb.eir_uuid, uuid16 );
+    }
+    else
+    {
+        APPL_TRACE_EVENT1("Removing UUID=0x%04X from EIR", uuid16);
+
+        BTM_RemoveEirService( bta_dm_cb.eir_uuid, uuid16 );
+    }
+
+    bta_dm_set_eir (NULL);
+
+    APPL_TRACE_EVENT2("bta_dm_eir_update_uuid UUID bit mask=0x%08X %08X",
+                       bta_dm_cb.eir_uuid[1], bta_dm_cb.eir_uuid[0] );
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_dm_enable_test_mode
+**
+** Description      enable test mode
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_enable_test_mode(tBTA_DM_MSG *p_data)
+{
+    BTM_EnableTestMode();
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_disable_test_mode
+**
+** Description      disable test mode
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_disable_test_mode(tBTA_DM_MSG *p_data)
+{
+    BTM_DeviceReset(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_execute_callback
+**
+** Description      Just execute a generic call back in the context of the BTU/BTA tack
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_execute_callback(tBTA_DM_MSG *p_data)
+{
+    /* sanity check */
+    if(p_data->exec_cback.p_exec_cback == NULL)
+    {
+        return;
+    }
+
+    p_data->exec_cback.p_exec_cback(p_data->exec_cback.p_param);
+}
+/*******************************************************************************
+**
+** Function         bta_dm_encrypt_cback
+**
+** Description      link encryption complete callback.
+**
+** Returns         None
+**
+*******************************************************************************/
+void bta_dm_encrypt_cback(BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result)
+{
+    tBTA_STATUS   bta_status = BTA_SUCCESS;
+    tBTA_DM_ENCRYPT_CBACK *p_callback = bta_dm_cb.p_encrypt_cback;
+
+    bta_dm_cb.p_encrypt_cback = NULL;
+    switch (result)
+    {
+        case BTM_SUCCESS:
+            break;
+        case BTM_WRONG_MODE:
+            bta_status = BTA_WRONG_MODE;
+            break;
+        case BTM_NO_RESOURCES:
+            bta_status = BTA_NO_RESOURCES;
+            break;
+        case BTM_BUSY:
+            bta_status = BTA_BUSY;
+            break;
+        default:
+            bta_status = BTA_FAILURE;
+            break;
+    }
+
+    APPL_TRACE_DEBUG2("bta_dm_encrypt_cback status =%d p_callback=0x%x", bta_status, p_callback);
+
+    if (p_callback)
+    {
+        (*p_callback)(bd_addr, bta_status);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_dm_set_encryption
+**
+** Description      This function to encrypt the link
+**
+** Returns          None
+**
+*******************************************************************************/
+void bta_dm_set_encryption (tBTA_DM_MSG *p_data)
+{
+
+    APPL_TRACE_DEBUG0("bta_dm_set_encryption"); //todo
+    if (!p_data->set_encryption.p_callback)
+    {
+        APPL_TRACE_ERROR0("bta_dm_set_encryption callback is not provided");
+        return;
+    }
+
+    if (bta_dm_cb.p_encrypt_cback)
+    {
+        (*p_data->set_encryption.p_callback)(p_data->set_encryption.bd_addr, BTA_BUSY);
+        return;
+    }
+
+
+    bta_dm_cb.p_encrypt_cback = p_data->set_encryption.p_callback;
+    bta_dm_cb.sec_act         = p_data->set_encryption.sec_act;
+    BTM_SetEncryption(p_data->set_encryption.bd_addr, bta_dm_encrypt_cback, &bta_dm_cb.sec_act);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_afh_channels
+**
+** Description      set afh channels
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_set_afh_channels(tBTA_DM_MSG * p_data)
+{
+
+    BTM_SetAfhChannels(p_data->set_afhchannels.first,p_data->set_afhchannels.last);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_set_afh_channel_assesment
+**
+** Description      set afh channel assesment
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void bta_dm_set_afh_channel_assesment (tBTA_DM_MSG * p_data)
+{
+    BTM_SetAfhChannelAssessment(p_data->set_afh_channel_assessment.enable_or_disable);
+}
+
+#if (BLE_INCLUDED == TRUE)
+#if (SMP_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_ble_smp_cback
+**
+** Description      Callback for BLE SMP
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static UINT8 bta_dm_ble_smp_cback (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data)
+{
+    tBTM_STATUS status = BTM_SUCCESS;
+    tBTA_DM_SEC sec_event;
+
+    if (!bta_dm_cb.p_sec_cback)
+        return BTM_NOT_AUTHORIZED;
+
+    memset(&sec_event, 0, sizeof(tBTA_DM_SEC));
+    switch (event)
+    {
+        case BTM_LE_IO_REQ_EVT:
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+
+            bta_dm_co_ble_io_req(bda,
+                                 &p_data->io_req.io_cap,
+                                 &p_data->io_req.oob_data,
+                                 &p_data->io_req.auth_req,
+                                 &p_data->io_req.max_key_size,
+                                 &p_data->io_req.init_keys,
+                                 &p_data->io_req.resp_keys);
+#endif
+#if BTM_OOB_INCLUDED == FALSE
+            status = BTM_SUCCESS;
+#endif
+            APPL_TRACE_EVENT2("io mitm: %d oob_data:%d", p_data->io_req.auth_req, p_data->io_req.oob_data);
+
+            break;
+
+        case BTM_LE_SEC_REQUEST_EVT:
+            bdcpy(sec_event.ble_req.bd_addr, bda);
+            BCM_STRNCPY_S((char*)sec_event.ble_req.bd_name, sizeof(BD_NAME), bta_dm_get_remname(), (BD_NAME_LEN-1));
+            bta_dm_cb.p_sec_cback(BTA_DM_BLE_SEC_REQ_EVT, &sec_event);
+            break;
+
+        case BTM_LE_KEY_NOTIF_EVT:
+            bdcpy(sec_event.key_notif.bd_addr, bda);
+            BCM_STRNCPY_S((char*)sec_event.key_notif.bd_name, sizeof(BD_NAME), bta_dm_get_remname(), (BD_NAME_LEN-1));
+            sec_event.key_notif.passkey = p_data->key_notif;
+            bta_dm_cb.p_sec_cback(BTA_DM_BLE_PASSKEY_NOTIF_EVT, &sec_event);
+            break;
+
+        case BTM_LE_KEY_REQ_EVT:
+            bdcpy(sec_event.ble_req.bd_addr, bda);
+            bta_dm_cb.p_sec_cback(BTA_DM_BLE_PASSKEY_REQ_EVT, &sec_event);
+            break;
+
+        case BTM_LE_OOB_REQ_EVT:
+            bdcpy(sec_event.ble_req.bd_addr, bda);
+            bta_dm_cb.p_sec_cback(BTA_DM_BLE_OOB_REQ_EVT, &sec_event);
+            break;
+
+        case BTM_LE_KEY_EVT:
+            bdcpy(sec_event.ble_key.bd_addr, bda);
+            sec_event.ble_key.key_type = p_data->key.key_type;
+            memcpy(&sec_event.ble_key.key_value, p_data->key.p_key_value, sizeof(tBTM_LE_KEY_VALUE));
+            bta_dm_cb.p_sec_cback(BTA_DM_BLE_KEY_EVT, &sec_event);
+            break;
+
+        case BTM_LE_COMPLT_EVT:
+            bdcpy(sec_event.auth_cmpl.bd_addr, bda);
+            if (p_data->complt.reason != 0)
+                sec_event.auth_cmpl.fail_reason = BTA_DM_AUTH_CONVERT_SMP_CODE(((UINT8)p_data->complt.reason));
+            else
+                sec_event.auth_cmpl.success = TRUE;
+
+            if (bta_dm_cb.p_sec_cback)
+            {
+                //bta_dm_cb.p_sec_cback(BTA_DM_AUTH_CMPL_EVT, &sec_event);
+                bta_dm_cb.p_sec_cback(BTA_DM_BLE_AUTH_CMPL_EVT, &sec_event);
+            }
+
+            break;
+
+        default:
+            status = BTM_NOT_AUTHORIZED;
+            break;
+    }
+    return status;
+}
+#endif  /* SMP_INCLUDED == TRUE */
+
+/*******************************************************************************
+**
+** Function         bta_dm_ble_id_key_cback
+**
+** Description      Callback for BLE local ID keys
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_ble_id_key_cback (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key)
+{
+    UINT8   evt;
+    tBTA_DM_SEC dm_key;
+
+    switch (key_type)
+    {
+        case BTM_BLE_KEY_TYPE_ID:
+        case BTM_BLE_KEY_TYPE_ER:
+            if (bta_dm_cb.p_sec_cback)
+            {
+                memcpy(&dm_key.ble_id_keys, p_key, sizeof(tBTM_BLE_LOCAL_KEYS));
+
+                evt = (key_type == BTM_BLE_KEY_TYPE_ID) ? BTA_DM_BLE_LOCAL_IR_EVT :\
+                      BTA_DM_BLE_LOCAL_ER_EVT;
+                bta_dm_cb.p_sec_cback(evt, &dm_key);
+            }
+            break;
+
+        default:
+            APPL_TRACE_DEBUG1("Unknown key type %d", key_type);
+            break;
+    }
+    return;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_add_blekey
+**
+** Description      This function adds an BLE Key to an security database entry.
+**                  This function shall only be called AFTER BTA_DmAddBleDevice has been called.
+**                  It is normally called during host startup to restore all required information
+**                  stored in the NVRAM.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_add_blekey (tBTA_DM_MSG *p_data)
+{
+    if (!BTM_SecAddBleKey (p_data->add_ble_key.bd_addr,
+                           (tBTM_LE_KEY_VALUE *)&p_data->add_ble_key.blekey,
+                           p_data->add_ble_key.key_type))
+    {
+        APPL_TRACE_ERROR2 ("BTA_DM: Error adding BLE Key for device %08x%04x",
+                           (p_data->add_ble_key.bd_addr[0]<<24)+(p_data->add_ble_key.bd_addr[1]<<16)+\
+                           (p_data->add_ble_key.bd_addr[2]<<8)+p_data->add_ble_key.bd_addr[3],
+                           (p_data->add_ble_key.bd_addr[4]<<8)+p_data->add_ble_key.bd_addr[5]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_add_ble_device
+**
+** Description      This function adds an BLE device to an security database entry.
+**                  It is normally called during host startup to restore all required information
+**                  stored in the NVRAM.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_add_ble_device (tBTA_DM_MSG *p_data)
+{
+    if (!BTM_SecAddBleDevice (p_data->add_ble_device.bd_addr, NULL,
+                              p_data->add_ble_device.dev_type  ,
+                              p_data->add_ble_device.addr_type))
+    {
+        APPL_TRACE_ERROR2 ("BTA_DM: Error adding BLE Device for device %08x%04x",
+                           (p_data->add_ble_device.bd_addr[0]<<24)+(p_data->add_ble_device.bd_addr[1]<<16)+ \
+                           (p_data->add_ble_device.bd_addr[2]<<8)+p_data->add_ble_device.bd_addr[3],
+                           (p_data->add_ble_device.bd_addr[4]<<8)+p_data->add_ble_device.bd_addr[5]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_add_ble_device
+**
+** Description      This function adds an BLE device to an security database entry.
+**                  It is normally called during host startup to restore all required information
+**                  stored in the NVRAM.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_ble_passkey_reply (tBTA_DM_MSG *p_data)
+{
+    if (p_data->pin_reply.accept)
+    {
+
+        BTM_BlePasskeyReply(p_data->ble_passkey_reply.bd_addr, BTM_SUCCESS, p_data->ble_passkey_reply.passkey);
+    }
+    else
+    {
+        BTM_BlePasskeyReply(p_data->ble_passkey_reply.bd_addr, BTM_NOT_AUTHORIZED, p_data->ble_passkey_reply.passkey);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_security_grant
+**
+** Description      This function grant SMP security request access.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_security_grant (tBTA_DM_MSG *p_data)
+{
+    BTM_SecurityGrant(p_data->ble_sec_grant.bd_addr, p_data->ble_sec_grant.res);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ble_set_bg_conn_type
+**
+** Description      This function set the BLE background connection type
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_ble_set_bg_conn_type (tBTA_DM_MSG *p_data)
+{
+    BTM_BleSetBgConnType(p_data->ble_set_bd_conn_type.bg_conn_type,
+                         p_data->ble_set_bd_conn_type.p_select_cback);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ble_set_conn_params
+**
+** Description      This function set the preferred connection parameters.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_ble_set_conn_params (tBTA_DM_MSG *p_data)
+{
+    BTM_BleSetPrefConnParams(p_data->ble_set_conn_params.peer_bda,
+                             p_data->ble_set_conn_params.conn_int_min,
+                             p_data->ble_set_conn_params.conn_int_max,
+                             p_data->ble_set_conn_params.slave_latency,
+                             p_data->ble_set_conn_params.supervision_tout);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ble_set_scan_params
+**
+** Description      This function set the preferred connection scan parameters.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_ble_set_scan_params (tBTA_DM_MSG *p_data)
+{
+    BTM_BleSetConnScanParams(p_data->ble_set_scan_params.scan_int,
+                             p_data->ble_set_scan_params.scan_window);
+}
+
+#if ((defined BTA_GATT_INCLUDED) &&  (BTA_GATT_INCLUDED == TRUE))
+
+/*******************************************************************************
+**
+** Function         btm_dm_start_disc_gatt_services
+**
+** Description      This function starts a GATT service search request.
+**
+** Parameters:
+**
+*******************************************************************************/
+static void btm_dm_start_disc_gatt_services (UINT16 conn_id)
+{
+    tBT_UUID    *p_uuid = bta_dm_search_cb.p_srvc_uuid +
+                          bta_dm_search_cb.num_uuid - bta_dm_search_cb.uuid_to_search;
+
+    p_uuid = bta_dm_search_cb.p_srvc_uuid +
+             bta_dm_search_cb.num_uuid - bta_dm_search_cb.uuid_to_search;
+
+    /* always search for all services */
+    BTA_GATTC_ServiceSearchRequest(conn_id, p_uuid);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_gatt_disc_result
+**
+** Description      This function process the GATT service search result.
+**
+** Parameters:
+**
+*******************************************************************************/
+static void bta_dm_gatt_disc_result(tBTA_GATT_ID service_id)
+{
+    tBTA_DM_SEARCH   result;
+
+    /*
+        * This logic will not work for gatt case.  We are checking against the bluetooth profiles here
+        * just copy the GATTID in raw data field and send it across.
+        */
+
+
+    if ( bta_dm_search_cb.ble_raw_used + sizeof(tBTA_GATT_ID) < bta_dm_search_cb.ble_raw_size )
+    {
+        APPL_TRACE_DEBUG3("ADDING BLE SERVICE uuid=0x%x, ble_ptr = 0x%x, ble_raw_used = 0x%x", service_id.uuid.uu.uuid16,bta_dm_search_cb.p_ble_rawdata,bta_dm_search_cb.ble_raw_used);
+
+        memcpy((bta_dm_search_cb.p_ble_rawdata + bta_dm_search_cb.ble_raw_used), &service_id,
+                sizeof(service_id) );
+
+        bta_dm_search_cb.ble_raw_used += sizeof(service_id);
+
+    }
+    else
+    {
+        APPL_TRACE_ERROR3("%s out of room to accomodate more service ids ble_raw_size = %d ble_raw_used = %d", __FUNCTION__,bta_dm_search_cb.ble_raw_size, bta_dm_search_cb.ble_raw_used );
+    }
+
+    APPL_TRACE_ERROR1("bta_dm_gatt_disc_result serivce_id len=%d ", service_id.uuid.len);
+    if ( bta_dm_search_cb.state != BTA_DM_SEARCH_IDLE)
+    {
+
+        /* send result back to app now, one by one */
+        bdcpy (result.disc_ble_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+        BCM_STRNCPY_S((char*)result.disc_ble_res.bd_name, sizeof(BD_NAME), bta_dm_get_remname(), (BD_NAME_LEN-1));
+        memcpy(&result.disc_ble_res.service, &service_id.uuid, sizeof(tBT_UUID));
+
+        bta_dm_search_cb.p_search_cback(BTA_DM_DISC_BLE_RES_EVT, &result);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_gatt_disc_complete
+**
+** Description      This function process the GATT service search complete.
+**
+** Parameters:
+**
+*******************************************************************************/
+static void bta_dm_gatt_disc_complete(UINT16 conn_id, tBTA_GATT_STATUS status)
+{
+    tBTA_DM_MSG *p_msg;
+
+    APPL_TRACE_DEBUG1("bta_dm_gatt_disc_complete conn_id = %d",conn_id);
+
+    if (bta_dm_search_cb.uuid_to_search > 0) bta_dm_search_cb.uuid_to_search --;
+
+    if (status == BTA_GATT_OK && bta_dm_search_cb.uuid_to_search > 0)
+    {
+        btm_dm_start_disc_gatt_services(conn_id);
+    }
+    else
+    {
+        bta_dm_search_cb.uuid_to_search = 0;
+
+        /* no more services to be discovered */
+        if ((p_msg = (tBTA_DM_MSG *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+        {
+            p_msg->hdr.event = BTA_DM_DISCOVERY_RESULT_EVT;
+            p_msg->disc_result.result.disc_res.result = (status == BTA_GATT_OK) ? BTA_SUCCESS :BTA_FAILURE;
+            p_msg->disc_result.result.disc_res.services = bta_dm_search_cb.services_found;
+            bdcpy (p_msg->disc_result.result.disc_res.bd_addr, bta_dm_search_cb.peer_bdaddr);
+            BCM_STRNCPY_S((char*)p_msg->disc_result.result.disc_res.bd_name, sizeof(BD_NAME),
+                    bta_dm_get_remname(), (BD_NAME_LEN-1));
+
+            /* make sure the string is terminated */
+            p_msg->disc_result.result.disc_res.bd_name[BD_NAME_LEN-1] = 0;
+
+            p_msg->disc_result.result.disc_res.device_type = BT_DEVICE_TYPE_BLE;
+            if ( bta_dm_search_cb.ble_raw_used > 0 )
+            {
+                p_msg->disc_result.result.disc_res.p_raw_data = GKI_getbuf(bta_dm_search_cb.ble_raw_used);
+
+                memcpy( p_msg->disc_result.result.disc_res.p_raw_data,
+                            bta_dm_search_cb.p_ble_rawdata,
+                            bta_dm_search_cb.ble_raw_used );
+
+                p_msg->disc_result.result.disc_res.raw_data_size = bta_dm_search_cb.ble_raw_used;
+            }
+            else
+            {
+                p_msg->disc_result.result.disc_res.p_raw_data = NULL;
+                bta_dm_search_cb.p_ble_rawdata = 0;
+            }
+
+            bta_sys_sendmsg(p_msg);
+        }
+        if (conn_id != BTA_GATT_INVALID_CONN_ID)
+        {
+            BTA_GATTC_Close(conn_id);
+        }
+        bta_dm_search_cb.conn_id = BTA_GATT_INVALID_CONN_ID;
+        bta_dm_search_cb.gatt_disc_active = FALSE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_dm_start_gatt_discovery
+**
+** Description      This is GATT initiate the service search by open a GATT connection
+**                  first.
+**
+** Parameters:
+**
+*******************************************************************************/
+void btm_dm_start_gatt_discovery (BD_ADDR bd_addr)
+{
+    bta_dm_search_cb.gatt_disc_active = TRUE;
+    BTA_GATTC_Open(bta_dm_search_cb.client_if, bd_addr, TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_cancel_gatt_discovery
+**
+** Description      This is GATT cancel the GATT service search.
+**
+** Parameters:
+**
+*******************************************************************************/
+static void bta_dm_cancel_gatt_discovery(BD_ADDR bd_addr)
+{
+    if (bta_dm_search_cb.conn_id == BTA_GATT_INVALID_CONN_ID)
+    {
+        BTA_GATTC_CancelOpen(bta_dm_search_cb.client_if, bd_addr, TRUE);
+    }
+
+    bta_dm_gatt_disc_complete(bta_dm_search_cb.conn_id, (tBTA_GATT_STATUS) BTA_GATT_ERROR);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_proc_open_evt
+**
+** Description      process BTA_GATTC_OPEN_EVT in DM.
+**
+** Parameters:
+**
+*******************************************************************************/
+void bta_dm_proc_open_evt(tBTA_GATTC_OPEN *p_data)
+{
+    UINT8           *p1;
+    UINT8           *p2;
+
+    p1 = bta_dm_search_cb.peer_bdaddr;
+    p2 = p_data->remote_bda;
+
+    APPL_TRACE_DEBUG5("DM Search state= %d search_cb.peer_dbaddr: [%08x%04x] connected_bda= [%08x%04x] ",
+                      bta_dm_search_cb.state,
+                      ((p1[0])<<24)+((p1[1])<<16)+((p1[2])<<8)+(p1[3]),
+                      ((p1[4])<<8)+ p1[5],
+                      ((p2[0])<<24)+((p2[1])<<16)+((p2[2])<<8)+(p2[3]),
+                      ((p2[4])<<8)+ p2[5]);
+
+    APPL_TRACE_DEBUG3("BTA_GATTC_OPEN_EVT conn_id = %d client_if=%d status = %d" ,
+                      p_data->conn_id,
+                      p_data->client_if,
+                      p_data->status);
+
+    bta_dm_search_cb.conn_id = p_data->conn_id;
+
+    if (p_data->status == BTA_GATT_OK)
+    {
+        btm_dm_start_disc_gatt_services(p_data->conn_id);
+    }
+    else
+    {
+        bta_dm_gatt_disc_complete(BTA_GATT_INVALID_CONN_ID, p_data->status);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_gattc_callback
+**
+** Description      This is GATT client callback function used in DM.
+**
+** Parameters:
+**
+*******************************************************************************/
+static void bta_dm_gattc_callback(tBTA_GATTC_EVT event, tBTA_GATTC *p_data)
+{
+    APPL_TRACE_DEBUG1("bta_dm_gattc_callback event = %d", event);
+
+    switch (event)
+    {
+        case BTA_GATTC_REG_EVT:
+            APPL_TRACE_DEBUG1("BTA_GATTC_REG_EVT client_if = %d",  p_data->reg_oper.client_if);
+            if (p_data->reg_oper.status == BTA_GATT_OK)
+                bta_dm_search_cb.client_if = p_data->reg_oper.client_if;
+            else
+                bta_dm_search_cb.client_if = BTA_GATTS_INVALID_IF;
+            break;
+
+        case BTA_GATTC_OPEN_EVT:
+            bta_dm_proc_open_evt(&p_data->open);
+            break;
+
+        case BTA_GATTC_SEARCH_RES_EVT:
+            bta_dm_gatt_disc_result(p_data->srvc_res.service_uuid.id);
+            break;
+
+        case BTA_GATTC_SEARCH_CMPL_EVT:
+            if ( bta_dm_search_cb.state != BTA_DM_SEARCH_IDLE)
+                bta_dm_gatt_disc_complete(p_data->search_cmpl.conn_id, p_data->search_cmpl.status);
+            break;
+
+        case BTA_GATTC_CLOSE_EVT:
+            APPL_TRACE_DEBUG1("BTA_GATTC_CLOSE_EVT reason = %d", p_data->close.reason);
+            /* in case of disconnect before search is completed */
+            if ( (bta_dm_search_cb.state != BTA_DM_SEARCH_IDLE) &&
+                 !memcmp(p_data->close.remote_bda, bta_dm_search_cb.peer_bdaddr, BD_ADDR_LEN))
+            {
+                bta_dm_gatt_disc_complete((UINT16)BTA_GATT_INVALID_CONN_ID,  (tBTA_GATT_STATUS) BTA_GATT_ERROR);
+            }
+            break;
+
+        default:
+            break;
+    }
+}
+
+#endif /* BTA_GATT_INCLUDED */
+
+#endif  /* BLE_INCLUDED */
diff --git a/bta/dm/bta_dm_api.c b/bta/dm/bta_dm_api.c
new file mode 100644
index 0000000..06e3b93
--- /dev/null
+++ b/bta/dm/bta_dm_api.c
@@ -0,0 +1,1616 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the API implementation file for the BTA device manager.
+ *
+ ******************************************************************************/
+
+#include "gki.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_dm_int.h"
+#include "bta_sys_int.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include <string.h>
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_dm_reg =
+{
+    bta_dm_sm_execute,
+    bta_dm_sm_disable
+};
+
+static const tBTA_SYS_REG bta_dm_search_reg =
+{
+    bta_dm_search_sm_execute,
+    bta_dm_search_sm_disable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_EnableBluetooth
+**
+** Description      Enables bluetooth service.  This function must be
+**                  called before any other functions in the BTA API are called.
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback)
+{
+
+    tBTA_DM_API_ENABLE    *p_msg;
+
+    /* Bluetooth disabling is in progress */
+    if (bta_dm_cb.disabling)
+        return BTA_FAILURE;
+
+    memset(&bta_dm_cb, 0, sizeof(bta_dm_cb));
+
+    GKI_sched_lock();
+    bta_sys_register (BTA_ID_DM, &bta_dm_reg );
+    bta_sys_register (BTA_ID_DM_SEARCH, &bta_dm_search_reg );
+
+    /* if UUID list is not provided as static data */
+    bta_sys_eir_register(bta_dm_eir_update_uuid);
+
+    GKI_sched_unlock();
+
+    if ((p_msg = (tBTA_DM_API_ENABLE *) GKI_getbuf(sizeof(tBTA_DM_API_ENABLE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_ENABLE_EVT;
+        p_msg->p_sec_cback = p_cback;
+        bta_sys_sendmsg(p_msg);
+        return BTA_SUCCESS;
+    }
+    return BTA_FAILURE;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DisableBluetooth
+**
+** Description      Disables bluetooth service.  This function is called when
+**                  the application no longer needs bluetooth service
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DisableBluetooth(void)
+{
+
+    BT_HDR    *p_msg;
+
+    if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_DM_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+    else
+    {
+        return BTA_FAILURE;
+    }
+
+    return BTA_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_EnableTestMode
+**
+** Description      Enables bluetooth device under test mode
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+tBTA_STATUS BTA_EnableTestMode(void)
+{
+    BT_HDR    *p_msg;
+
+    APPL_TRACE_API0("BTA_EnableTestMode");
+
+    if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_DM_API_ENABLE_TEST_MODE_EVT;
+        bta_sys_sendmsg(p_msg);
+        return BTA_SUCCESS;
+    }
+    return BTA_FAILURE;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DisableTestMode
+**
+** Description      Disable bluetooth device under test mode
+**
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_DisableTestMode(void)
+{
+    BT_HDR    *p_msg;
+
+    APPL_TRACE_API0("BTA_DisableTestMode");
+
+    if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_DM_API_DISABLE_TEST_MODE_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmIsDeviceUp
+**
+** Description      Called during startup to check whether the bluetooth module
+**                  is up and ready
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN BTA_DmIsDeviceUp(void)
+{
+
+    BOOLEAN status;
+
+    GKI_sched_lock();
+    status = BTM_IsDeviceUp();
+    GKI_sched_unlock();
+    return status;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetDeviceName
+**
+** Description      This function sets the Bluetooth name of local device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetDeviceName(char *p_name)
+{
+
+    tBTA_DM_API_SET_NAME    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SET_NAME *) GKI_getbuf(sizeof(tBTA_DM_API_SET_NAME))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_SET_NAME_EVT;
+        /* truncate the name if needed */
+        BCM_STRNCPY_S(p_msg->name, sizeof(p_msg->name), p_name, BD_NAME_LEN-1);
+        p_msg->name[BD_NAME_LEN-1]=0;
+
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetVisibility
+**
+** Description      This function sets the Bluetooth connectable,
+**                  discoverable, pairable and conn paired only modes of local device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter )
+{
+
+    tBTA_DM_API_SET_VISIBILITY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SET_VISIBILITY *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_SET_VISIBILITY_EVT;
+        p_msg->disc_mode = disc_mode;
+        p_msg->conn_mode = conn_mode;
+        p_msg->pair_mode = pairable_mode;
+        p_msg->conn_paired_only = conn_filter;
+
+
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetScanParam
+**
+** Description      This function sets the parameters for page scan and
+**                  inquiry scan.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_scan_window,
+                                  UINT16 inquiry_scan_interval, UINT16 inquiry_scan_window)
+{
+    APPL_TRACE_API4 ("BTA_DmSetScanParam: %d, %d, %d, %d",
+            page_scan_interval, page_scan_window,
+            inquiry_scan_interval, inquiry_scan_window);
+
+    bta_dm_cb.page_scan_interval = page_scan_interval;
+    bta_dm_cb.page_scan_window = page_scan_window;
+    bta_dm_cb.inquiry_scan_interval = inquiry_scan_interval;
+    bta_dm_cb.inquiry_scan_window = inquiry_scan_window;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetAfhChannels
+**
+** Description      This function sets the AFH first and
+**                  last disable channel, so channels within
+**                  that range are disabled.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetAfhChannels(UINT8 first, UINT8 last)
+{
+
+    tBTA_DM_API_SET_AFH_CHANNELS_EVT    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SET_AFH_CHANNELS_EVT *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_SET_AFH_CHANNELS_EVT;
+        p_msg->first = first;
+        p_msg->last = last;
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_SetAfhChannelAssessment
+**
+** Description      This function is called to set the channel assessment mode on or off
+**
+** Returns          status
+**
+*******************************************************************************/
+void BTA_DmSetAfhChannelAssessment (BOOLEAN enable_or_disable)
+{
+    tBTA_DM_API_SET_AFH_CHANNEL_ASSESSMENT *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SET_AFH_CHANNEL_ASSESSMENT *) GKI_getbuf(sizeof(tBTA_DM_API_SET_AFH_CHANNEL_ASSESSMENT))) != NULL)
+    {
+        p_msg->hdr.event    = BTA_DM_API_SET_AFH_CHANNEL_ASSESMENT_EVT;
+        p_msg->enable_or_disable = enable_or_disable;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmVendorSpecificCommand
+**
+** Description      This function sends the vendor specific command
+**                  to the controller
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 param_len,
+                                         UINT8 *p_param_buf,
+                                         tBTA_VENDOR_CMPL_CBACK *p_cback)
+{
+
+    tBTA_DM_API_VENDOR_SPECIFIC_COMMAND    *p_msg;
+    UINT16 size;
+
+    /* If p_cback is NULL, Notify application */
+    if (p_cback == NULL)
+    {
+        return (BTA_FAILURE);
+    }
+    else
+    {
+        size = sizeof (tBTA_DM_API_VENDOR_SPECIFIC_COMMAND) + param_len;
+        if ((p_msg = (tBTA_DM_API_VENDOR_SPECIFIC_COMMAND *) GKI_getbuf(size)) != NULL)
+        {
+            p_msg->hdr.event = BTA_DM_API_VENDOR_SPECIFIC_COMMAND_EVT;
+            p_msg->opcode = opcode;
+            p_msg->param_len = param_len;
+            p_msg->p_param_buf = (UINT8 *)(p_msg + 1);
+            p_msg->p_cback = p_cback;
+
+            memcpy (p_msg->p_param_buf, p_param_buf, param_len);
+
+            bta_sys_sendmsg(p_msg);
+        }
+        return (BTA_SUCCESS);
+    }
+}
+/*******************************************************************************
+**
+** Function         BTA_DmSearch
+**
+** Description      This function searches for peer Bluetooth devices. It performs
+**                  an inquiry and gets the remote name for devices. Service
+**                  discovery is done if services is non zero
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services, tBTA_DM_SEARCH_CBACK *p_cback)
+{
+
+    tBTA_DM_API_SEARCH    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SEARCH *) GKI_getbuf(sizeof(tBTA_DM_API_SEARCH))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_SEARCH));
+
+        p_msg->hdr.event = BTA_DM_API_SEARCH_EVT;
+        memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ));
+        p_msg->services = services;
+        p_msg->p_cback = p_cback;
+        p_msg->rs_res  = BTA_DM_RS_NONE;
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmSearchCancel
+**
+** Description      This function  cancels a search initiated by BTA_DmSearch
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSearchCancel(void)
+{
+    BT_HDR    *p_msg;
+
+    if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_DM_API_SEARCH_CANCEL_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmDiscover
+**
+** Description      This function does service discovery for services of a
+**                  peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services,
+                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
+{
+    tBTA_DM_API_DISCOVER    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_DISCOVER *) GKI_getbuf(sizeof(tBTA_DM_API_DISCOVER))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_DISCOVER));
+
+        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->services = services;
+        p_msg->p_cback = p_cback;
+        p_msg->sdp_search = sdp_search;
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmDiscoverUUID
+**
+** Description      This function does service discovery for services of a
+**                  peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid,
+                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
+{
+    tBTA_DM_API_DISCOVER    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_DISCOVER *) GKI_getbuf(sizeof(tBTA_DM_API_DISCOVER))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->services = BTA_USER_SERVICE_MASK; //Not exposed at API level
+        p_msg->p_cback = p_cback;
+        p_msg->sdp_search = sdp_search;
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+        p_msg->num_uuid = 0;
+        p_msg->p_uuid = NULL;
+#endif
+        memcpy( &p_msg->uuid, uuid, sizeof(tSDP_UUID) );
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         BTA_DmIsMaster
+**
+** Description      This function checks if the local device is the master of
+**                  the link to the given device
+**
+** Returns          TRUE if master.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN BTA_DmIsMaster(BD_ADDR bd_addr)
+{
+    BOOLEAN is_master = FALSE;
+    UINT8 link_role;
+
+    BTM_GetRole(bd_addr, &link_role);
+    APPL_TRACE_API1("BTA_DmIsMaster role:x%x", link_role);
+    if(link_role == BTM_ROLE_MASTER)
+    {
+        is_master = TRUE;
+    }
+    return is_master;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmBond
+**
+** Description      This function initiates a bonding procedure with a peer
+**                  device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmBond(BD_ADDR bd_addr)
+{
+    tBTA_DM_API_BOND    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BOND *) GKI_getbuf(sizeof(tBTA_DM_API_BOND))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_BOND_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmBondCancel
+**
+** Description      This function cancels the bonding procedure with a peer
+**                  device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmBondCancel(BD_ADDR bd_addr)
+{
+    tBTA_DM_API_BOND_CANCEL    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BOND_CANCEL *) GKI_getbuf(sizeof(tBTA_DM_API_BOND_CANCEL))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_BOND_CANCEL_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmPinReply
+**
+** Description      This function provides a pincode for a remote device when
+**                  one is requested by DM through BTA_DM_PIN_REQ_EVT
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len, UINT8 *p_pin)
+
+{
+    tBTA_DM_API_PIN_REPLY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_PIN_REPLY *) GKI_getbuf(sizeof(tBTA_DM_API_PIN_REPLY))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_PIN_REPLY_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->accept = accept;
+        if(accept)
+        {
+            p_msg->pin_len = pin_len;
+            memcpy(p_msg->p_pin, p_pin, pin_len);
+        }
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmLinkPolicy
+**
+** Description      This function sets/clears the link policy mask to the given
+**                  bd_addr.
+**                  If clearing the sniff or park mode mask, the link is put
+**                  in active mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmLinkPolicy(BD_ADDR bd_addr, tBTA_DM_LP_MASK policy_mask,
+                      BOOLEAN set)
+{
+    tBTA_DM_API_LINK_POLICY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_LINK_POLICY *) GKI_getbuf(sizeof(tBTA_DM_API_LINK_POLICY))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_LINK_POLICY_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->policy_mask = policy_mask;
+        p_msg->set = set;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+
+#if (BTM_OOB_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         BTA_DmLocalOob
+**
+** Description      This function retrieves the OOB data from local controller.
+**                  The result is reported by bta_dm_co_loc_oob().
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmLocalOob(void)
+{
+    tBTA_DM_API_LOC_OOB    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_LOC_OOB *) GKI_getbuf(sizeof(tBTA_DM_API_LOC_OOB))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_LOC_OOB_EVT;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+#endif /* BTM_OOB_INCLUDED */
+/*******************************************************************************
+**
+** Function         BTA_DmConfirm
+**
+** Description      This function accepts or rejects the numerical value of the
+**                  Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept)
+{
+    tBTA_DM_API_CONFIRM    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_CONFIRM *) GKI_getbuf(sizeof(tBTA_DM_API_CONFIRM))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_CONFIRM_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->accept = accept;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmPasskeyCancel
+**
+** Description      This function is called to cancel the simple pairing process
+**                  reported by BTA_DM_SP_KEY_NOTIF_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+void BTA_DmPasskeyCancel(BD_ADDR bd_addr)
+{
+    tBTA_DM_API_PASKY_CANCEL    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_PASKY_CANCEL *) \
+        GKI_getbuf(sizeof(tBTA_DM_API_PASKY_CANCEL))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_PASKY_CANCEL_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+    }
+}
+#endif
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddDevice
+**
+** Description      This function adds a device to the security database list of
+**                  peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, LINK_KEY link_key,
+                     tBTA_SERVICE_MASK trusted_mask, BOOLEAN is_trusted,
+                     UINT8 key_type, tBTA_IO_CAP io_cap)
+{
+
+    tBTA_DM_API_ADD_DEVICE *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_ADD_DEVICE *) GKI_getbuf(sizeof(tBTA_DM_API_ADD_DEVICE))) != NULL)
+    {
+        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_DEVICE));
+
+        p_msg->hdr.event = BTA_DM_API_ADD_DEVICE_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->tm = trusted_mask;
+        p_msg->is_trusted = is_trusted;
+        p_msg->io_cap = io_cap;
+
+        if (link_key)
+        {
+            p_msg->link_key_known = TRUE;
+            p_msg->key_type = key_type;
+            memcpy(p_msg->link_key, link_key, LINK_KEY_LEN);
+        }
+
+        /* Load device class if specified */
+        if (dev_class)
+        {
+            p_msg->dc_known = TRUE;
+            memcpy (p_msg->dc, dev_class, DEV_CLASS_LEN);
+        }
+
+        memset (p_msg->bd_name, 0, BD_NAME_LEN);
+        memset (p_msg->features, 0, BD_FEATURES_LEN);
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmRemoveDevice
+**
+** Description      This function removes a device fromthe security database list of
+**                  peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr)
+{
+    tBTA_DM_API_REMOVE_DEVICE *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_REMOVE_DEVICE *) GKI_getbuf(sizeof(tBTA_DM_API_REMOVE_DEVICE))) != NULL)
+    {
+        memset (p_msg, 0, sizeof(tBTA_DM_API_REMOVE_DEVICE));
+
+        p_msg->hdr.event = BTA_DM_API_REMOVE_DEVICE_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+    }
+    else
+    {
+        return BTA_FAILURE;
+    }
+
+    return BTA_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddDevWithName
+**
+** Description      This function is newer version of  BTA_DmAddDevice()
+**                  which added bd_name and features as input parameters.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                      BD_NAME bd_name, BD_FEATURES features,
+                                      LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask,
+                                      BOOLEAN is_trusted, UINT8 key_type, tBTA_IO_CAP io_cap)
+{
+    tBTA_DM_API_ADD_DEVICE *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_ADD_DEVICE *) GKI_getbuf(sizeof(tBTA_DM_API_ADD_DEVICE))) != NULL)
+    {
+        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_DEVICE));
+
+        p_msg->hdr.event = BTA_DM_API_ADD_DEVICE_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->tm = trusted_mask;
+        p_msg->is_trusted = is_trusted;
+        p_msg->io_cap = io_cap;
+
+        if (link_key)
+        {
+            p_msg->link_key_known = TRUE;
+            p_msg->key_type = key_type;
+            memcpy(p_msg->link_key, link_key, LINK_KEY_LEN);
+        }
+
+        /* Load device class if specified */
+        if (dev_class)
+        {
+            p_msg->dc_known = TRUE;
+            memcpy (p_msg->dc, dev_class, DEV_CLASS_LEN);
+        }
+
+        if (bd_name)
+            memcpy(p_msg->bd_name, bd_name, BD_NAME_LEN);
+
+        if (features)
+            memcpy(p_msg->features, features, BD_FEATURES_LEN);
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmAuthorizeReply
+**
+** Description      This function provides an authorization reply when authorization
+**                  is requested by BTA through BTA_DM_AUTHORIZE_EVT
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+void BTA_DmAuthorizeReply(BD_ADDR bd_addr, tBTA_SERVICE_ID service, tBTA_AUTH_RESP response)
+{
+
+    tBTA_DM_API_AUTH_REPLY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_AUTH_REPLY *) GKI_getbuf(sizeof(tBTA_DM_API_AUTH_REPLY))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_AUTH_REPLY_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->service = service;
+        p_msg->response = response;
+
+        bta_sys_sendmsg(p_msg);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSignalStrength
+**
+** Description      This function initiates RSSI and channnel quality
+**                  measurments. BTA_DM_SIG_STRENGTH_EVT is sent to
+**                  application with the values of RSSI and channel
+**                  quality
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSignalStrength(tBTA_SIG_STRENGTH_MASK mask, UINT16 period, BOOLEAN start)
+{
+
+    tBTA_API_DM_SIG_STRENGTH    *p_msg;
+
+    if ((p_msg = (tBTA_API_DM_SIG_STRENGTH *) GKI_getbuf(sizeof(tBTA_API_DM_SIG_STRENGTH))) != NULL)
+    {
+        p_msg->hdr.event = BTA_API_DM_SIG_STRENGTH_EVT;
+        p_msg->mask = mask;
+        p_msg->period = period;
+        p_msg->start = start;
+
+        bta_sys_sendmsg(p_msg);
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmWriteInqTxPower
+**
+** Description      This command is used to write the inquiry transmit power level
+**                  used to transmit the inquiry (ID) data packets.
+**
+** Parameters       tx_power - tx inquiry power to use, valid value is -70 ~ 20
+
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmWriteInqTxPower(INT8 tx_power)
+{
+
+    tBTA_API_DM_TX_INQPWR    *p_msg;
+
+    if ((p_msg = (tBTA_API_DM_TX_INQPWR *) GKI_getbuf(sizeof(tBTA_API_DM_TX_INQPWR))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_TX_INQPWR_EVT;
+        p_msg->tx_power = tx_power;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmEirAddUUID
+**
+** Description      This function is called to add UUID into EIR.
+**
+** Parameters       tBT_UUID - UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_DmEirAddUUID (tBT_UUID *p_uuid)
+{
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    tBTA_DM_API_UPDATE_EIR_UUID    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_UPDATE_EIR_UUID *) GKI_getbuf(sizeof(tBTA_DM_API_UPDATE_EIR_UUID))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_UPDATE_EIR_UUID_EVT;
+        p_msg->is_add    = TRUE;
+        memcpy (&(p_msg->uuid), p_uuid, sizeof(tBT_UUID));
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmEirRemoveUUID
+**
+** Description      This function is called to remove UUID from EIR.
+**
+** Parameters       tBT_UUID - UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid)
+{
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    tBTA_DM_API_UPDATE_EIR_UUID    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_UPDATE_EIR_UUID *) GKI_getbuf(sizeof(tBTA_DM_API_UPDATE_EIR_UUID))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_UPDATE_EIR_UUID_EVT;
+        p_msg->is_add    = FALSE;
+        memcpy (&(p_msg->uuid), p_uuid, sizeof(tBT_UUID));
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetEIRConfig
+**
+** Description      This function is called to override the BTA default EIR parameters.
+**                  This funciton is only valid in a system where BTU & App task
+**                  are in the same memory space.
+**
+** Parameters       Pointer to User defined EIR config
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg)
+{
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    tBTA_DM_API_SET_EIR_CONFIG  *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_SET_EIR_CONFIG *) GKI_getbuf(sizeof(tBTA_DM_API_SET_EIR_CONFIG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_SET_EIR_CONFIG_EVT;
+        p_msg->p_eir_cfg = p_eir_cfg;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_CheckEirData
+**
+** Description      This function is called to get EIR data from significant part.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  type   - finding EIR data type
+**                  p_length - return the length of EIR data
+**
+** Returns          pointer of EIR data
+**
+*******************************************************************************/
+UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length )
+{
+#if ( BTM_EIR_CLIENT_INCLUDED == TRUE )
+    return BTM_CheckEirData( p_eir, type, p_length );
+#else
+    return NULL;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GetEirService
+**
+** Description      This function is called to get BTA service mask from EIR.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  p_services - return the BTA service mask
+**
+** Returns          None
+**
+*******************************************************************************/
+extern const UINT16 bta_service_id_to_uuid_lkup_tbl [];
+void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services )
+{
+#if ( BTM_EIR_CLIENT_INCLUDED == TRUE )
+    UINT8 xx, yy;
+    UINT8 num_uuid, max_num_uuid = 32;
+    UINT8 uuid_list[32*LEN_UUID_16];
+    UINT16 *p_uuid16 = (UINT16 *)uuid_list;
+    tBTA_SERVICE_MASK mask;
+
+    BTM_GetEirUuidList( p_eir, LEN_UUID_16, &num_uuid, uuid_list, max_num_uuid);
+    for( xx = 0; xx < num_uuid; xx++ )
+    {
+        mask = 1;
+        for( yy = 0; yy < BTA_MAX_SERVICE_ID; yy++ )
+        {
+            if( *(p_uuid16 + xx) == bta_service_id_to_uuid_lkup_tbl[yy] )
+            {
+                *p_services |= mask;
+                break;
+            }
+            mask <<= 1;
+        }
+
+        /* for HSP v1.2 only device */
+        if (*(p_uuid16 + xx) == UUID_SERVCLASS_HEADSET_HS)
+            *p_services |= BTA_HSP_SERVICE_MASK;
+
+       if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SOURCE)
+            *p_services |= BTA_HL_SERVICE_MASK;
+
+        if (*(p_uuid16 + xx) == UUID_SERVCLASS_HDP_SINK)
+            *p_services |= BTA_HL_SERVICE_MASK;
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmUseSsr
+**
+** Description      This function is called to check if the connected peer device
+**                  supports SSR or not.
+**
+** Returns          TRUE, if SSR is supported
+**
+*******************************************************************************/
+BOOLEAN BTA_DmUseSsr( BD_ADDR bd_addr )
+{
+    BOOLEAN use_ssr = FALSE;
+    tBTA_DM_PEER_DEVICE * p_dev = bta_dm_find_peer_device(bd_addr);
+    if(p_dev && (p_dev->info & BTA_DM_DI_USE_SSR) )
+        use_ssr = TRUE;
+    return use_ssr;
+}
+
+/*******************************************************************************
+**                   Device Identification (DI) Server Functions
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         BTA_DmSetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+** Returns          BTA_SUCCESS if record set sucessfully, otherwise error code.
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info,
+                              UINT32 *p_handle )
+{
+    tBTA_STATUS  status = BTA_FAILURE;
+
+    if(bta_dm_di_cb.di_num < BTA_DI_NUM_MAX)
+    {
+        if(SDP_SetLocalDiRecord((tSDP_DI_RECORD *)p_device_info, p_handle) == SDP_SUCCESS)
+        {
+            if(!p_device_info->primary_record)
+            {
+                bta_dm_di_cb.di_handle[bta_dm_di_cb.di_num] = *p_handle;
+                bta_dm_di_cb.di_num ++;
+            }
+
+            bta_sys_add_uuid(UUID_SERVCLASS_PNP_INFORMATION);
+            status =  BTA_SUCCESS;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmGetLocalDiRecord
+**
+** Description      Get a specified DI record to the local SDP database. If no
+**                  record handle is provided, the primary DI record will be
+**                  returned.
+**
+**                  Fills in the device information of the record
+**                  p_handle - if p_handle == 0, the primary record is returned
+**
+** Returns          BTA_SUCCESS if record set sucessfully, otherwise error code.
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info,
+                              UINT32 *p_handle )
+{
+    UINT16  status;
+
+    status = SDP_GetLocalDiRecord(p_device_info, p_handle);
+
+    if (status == SDP_SUCCESS)
+        return BTA_SUCCESS;
+    else
+        return BTA_FAILURE;
+
+}
+
+/*******************************************************************************
+**                   Device Identification (DI) Client Functions
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         BTA_DmDiDiscover
+**
+** Description      This function queries a remote device for DI information.
+**
+**
+** Returns          None.
+**
+*******************************************************************************/
+void BTA_DmDiDiscover( BD_ADDR remote_device, tBTA_DISCOVERY_DB *p_db,
+                       UINT32 len, tBTA_DM_SEARCH_CBACK *p_cback )
+{
+    tBTA_DM_API_DI_DISC    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_DI_DISC *) GKI_getbuf(sizeof(tBTA_DM_API_DI_DISC))) != NULL)
+    {
+        bdcpy(p_msg->bd_addr, remote_device);
+        p_msg->hdr.event    = BTA_DM_API_DI_DISCOVER_EVT;
+        p_msg->p_sdp_db     = p_db;
+        p_msg->len          = len;
+        p_msg->p_cback      = p_cback;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmGetDiRecord
+**
+** Description      This function retrieves a remote device's DI record from
+**                  the specified database.
+**
+** Returns          BTA_SUCCESS if Get DI record is succeed.
+**                  BTA_FAILURE if Get DI record failed.
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmGetDiRecord( UINT8 get_record_index, tBTA_DI_GET_RECORD *p_device_info,
+                        tBTA_DISCOVERY_DB *p_db )
+{
+    if (SDP_GetDiRecord(get_record_index, p_device_info, p_db) != SDP_SUCCESS)
+        return BTA_FAILURE;
+    else
+        return BTA_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_SysFeatures
+**
+** Description      This function is called to set system features.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_SysFeatures (UINT16 sys_features)
+{
+    bta_sys_cb.sys_features = sys_features;
+
+    APPL_TRACE_API1("BTA_SysFeatures: sys_features = %d", sys_features);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dmexecutecallback
+**
+** Description      This function will request BTA to execute a call back in the context of BTU task
+**                  This API was named in lower case because it is only intended
+**                  for the internal customers(like BTIF).
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param)
+{
+    tBTA_DM_API_EXECUTE_CBACK *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_EXECUTE_CBACK *) GKI_getbuf(sizeof(tBTA_DM_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_API_EXECUTE_CBACK_EVT;
+        p_msg->p_param= p_param;
+        p_msg->p_exec_cback= p_callback;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddBleKey
+**
+** Description      Add/modify LE device information.  This function will be
+**                  normally called during host startup to restore all required
+**                  information stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  p_le_key         - LE key values.
+**                  key_type         - LE SMP key type.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, tBTA_LE_KEY_TYPE key_type)
+{
+#if BLE_INCLUDED == TRUE
+
+    tBTA_DM_API_ADD_BLEKEY *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_ADD_BLEKEY *) GKI_getbuf(sizeof(tBTA_DM_API_ADD_BLEKEY))) != NULL)
+    {
+        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_BLEKEY));
+
+        p_msg->hdr.event = BTA_DM_API_ADD_BLEKEY_EVT;
+        p_msg->key_type = key_type;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        memcpy(&p_msg->blekey, p_le_key, sizeof(tBTA_LE_KEY_VALUE));
+
+        bta_sys_sendmsg(p_msg);
+    }
+
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddBleDevice
+**
+** Description      Add a BLE device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  for a LE device stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  dev_type         - Remote device's device type.
+**                  addr_type        - LE device address type.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, tBT_DEVICE_TYPE dev_type)
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_ADD_BLE_DEVICE *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_ADD_BLE_DEVICE *) GKI_getbuf(sizeof(tBTA_DM_API_ADD_BLE_DEVICE))) != NULL)
+    {
+        memset (p_msg, 0, sizeof(tBTA_DM_API_ADD_BLE_DEVICE));
+
+        p_msg->hdr.event = BTA_DM_API_ADD_BLEDEVICE_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->addr_type = addr_type;
+        p_msg->dev_type = dev_type;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         BTA_DmBlePasskeyReply
+**
+** Description      Send BLE SMP passkey reply.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  accept           - passkey entry sucessful or declined.
+**                  passkey          - passkey value, must be a 6 digit number,
+**                                     can be lead by 0.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey)
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_PASSKEY_REPLY    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_PASSKEY_REPLY *) GKI_getbuf(sizeof(tBTA_DM_API_PASSKEY_REPLY))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_PASSKEY_REPLY));
+
+        p_msg->hdr.event = BTA_DM_API_BLE_PASSKEY_REPLY_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->accept = accept;
+
+        if(accept)
+        {
+            p_msg->passkey = passkey;
+        }
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         BTA_DmBleSecurityGrant
+**
+** Description      Grant security request access.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  res              - security grant status.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res)
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_BLE_SEC_GRANT    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BLE_SEC_GRANT *) GKI_getbuf(sizeof(tBTA_DM_API_BLE_SEC_GRANT))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SEC_GRANT));
+
+        p_msg->hdr.event = BTA_DM_API_BLE_SEC_GRANT_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->res = res;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         BTA_DmSetBlePrefConnParams
+**
+** Description      This function is called to set the preferred connection
+**                  parameters when default connection parameter is not desired.
+**
+** Parameters:      bd_addr          - BD address of the peripheral
+**                  scan_interval    - scan interval
+**                  scan_window      - scan window
+**                  min_conn_int     - minimum preferred connection interval
+**                  max_conn_int     - maximum preferred connection interval
+**                  slave_latency    - preferred slave latency
+**                  supervision_tout - preferred supervision timeout
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr,
+                               UINT16 min_conn_int, UINT16 max_conn_int,
+                               UINT16 slave_latency, UINT16 supervision_tout )
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_BLE_CONN_PARAMS    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BLE_CONN_PARAMS *) GKI_getbuf(sizeof(tBTA_DM_API_BLE_CONN_PARAMS))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_CONN_PARAMS));
+
+        p_msg->hdr.event = BTA_DM_API_BLE_CONN_PARAM_EVT;
+
+        memcpy(p_msg->peer_bda, bd_addr, BD_ADDR_LEN);
+
+        p_msg->conn_int_max     = max_conn_int;
+        p_msg->conn_int_min     = min_conn_int;
+        p_msg->slave_latency    = slave_latency;
+        p_msg->supervision_tout = supervision_tout;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetBleConnScanParams
+**
+** Description      This function is called to set scan parameters used in
+**                  BLE connection request
+**
+** Parameters:      scan_interval    - scan interval
+**                  scan_window      - scan window
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetBleConnScanParams(UINT16 scan_interval, UINT16 scan_window )
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_BLE_SCAN_PARAMS    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BLE_SCAN_PARAMS *) GKI_getbuf(sizeof(tBTA_DM_API_BLE_SCAN_PARAMS))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SCAN_PARAMS));
+
+        p_msg->hdr.event = BTA_DM_API_BLE_SCAN_PARAM_EVT;
+
+        p_msg->scan_int         = scan_interval;
+        p_msg->scan_window      = scan_window;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmBleSetBgConnType
+**
+** Description      This function is called to set BLE connectable mode for a
+**                  peripheral device.
+**
+** Parameters       bg_conn_type: it can be auto connection, or selective connection.
+**                  p_select_cback: callback function when selective connection procedure
+**                              is being used.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback)
+{
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_BLE_SET_BG_CONN_TYPE    *p_msg;
+
+    if ((p_msg = (tBTA_DM_API_BLE_SET_BG_CONN_TYPE *) GKI_getbuf(sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_BLE_SET_BG_CONN_TYPE));
+
+        p_msg->hdr.event        = BTA_DM_API_BLE_SET_BG_CONN_TYPE;
+        p_msg->bg_conn_type     = bg_conn_type;
+        p_msg->p_select_cback   = p_select_cback;
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         BTA_DmDiscoverExt
+**
+** Description      This function does service discovery for services of a
+**                  peer device. When services.num_uuid is 0, it indicates all
+**                  GATT based services are to be searched; other wise a list of
+**                  UUID of interested services should be provided through
+**                  p_services->p_uuid.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
+                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search)
+{
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    tBTA_DM_API_DISCOVER    *p_msg;
+    UINT16  len = p_services ? (sizeof(tBTA_DM_API_DISCOVER) + sizeof(tBT_UUID) * p_services->num_uuid) :
+                    sizeof(tBTA_DM_API_DISCOVER);
+
+    if ((p_msg = (tBTA_DM_API_DISCOVER *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_msg, 0, len);
+
+        p_msg->hdr.event = BTA_DM_API_DISCOVER_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->p_cback = p_cback;
+        p_msg->sdp_search = sdp_search;
+
+        if (p_services != NULL)
+        {
+            p_msg->services = p_services->srvc_mask;
+            p_msg->num_uuid = p_services->num_uuid;
+
+            if (p_services->num_uuid != 0)
+            {
+                p_msg->p_uuid = (tBT_UUID *)(p_msg + 1);
+                memcpy(p_msg->p_uuid, p_services->p_uuid, sizeof(tBT_UUID) * p_services->num_uuid);
+            }
+        }
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmSearchExt
+**
+** Description      This function searches for peer Bluetooth devices. It performs
+**                  an inquiry and gets the remote name for devices. Service
+**                  discovery is done if services is non zero
+**
+** Parameters       p_dm_inq: inquiry conditions
+**                  p_services: if service is not empty, service discovery will be done.
+**                            for all GATT based service condition, put num_uuid, and
+**                            p_uuid is the pointer to the list of UUID values.
+**                  p_cback: callback functino when search is completed.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, tBTA_DM_SEARCH_CBACK *p_cback)
+{
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    tBTA_DM_API_SEARCH    *p_msg;
+    UINT16  len = p_services ? (sizeof(tBTA_DM_API_SEARCH) + sizeof(tBT_UUID) * p_services->num_uuid) :
+                    sizeof(tBTA_DM_API_SEARCH);
+
+    if ((p_msg = (tBTA_DM_API_SEARCH *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_msg, 0, len);
+
+        p_msg->hdr.event = BTA_DM_API_SEARCH_EVT;
+        memcpy(&p_msg->inq_params, p_dm_inq, sizeof(tBTA_DM_INQ));
+        p_msg->p_cback = p_cback;
+        p_msg->rs_res  = BTA_DM_RS_NONE;
+
+
+        if (p_services != NULL)
+        {
+            p_msg->services = p_services->srvc_mask;
+            p_msg->num_uuid = p_services->num_uuid;
+
+            if (p_services->num_uuid != 0)
+            {
+                p_msg->p_uuid = (tBT_UUID *)(p_msg + 1);
+                memcpy(p_msg->p_uuid, p_services->p_uuid, sizeof(tBT_UUID) * p_services->num_uuid);
+            }
+            else
+                p_msg->p_uuid = NULL;
+        }
+
+        bta_sys_sendmsg(p_msg);
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetEncryption
+**
+** Description      This function is called to ensure that connection is
+**                  encrypted.  Should be called only on an open connection.
+**                  Typically only needed for connections that first want to
+**                  bring up unencrypted links, then later encrypt them.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  p_callback    - Pointer to callback function to indicat the
+**                                  link encryption status
+**                  sec_act       - This is the security action to indicate
+**                                  what knid of BLE security level is required for
+**                                  the BLE link if the BLE is supported
+**                                  Note: This parameter is ignored for the BR/EDR link
+**                                        or the BLE is not supported
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_DM_ENCRYPT_CBACK *p_callback,
+                            tBTA_DM_BLE_SEC_ACT sec_act)
+{
+    tBTA_DM_API_SET_ENCRYPTION   *p_msg;
+
+    APPL_TRACE_API0("BTA_DmSetEncryption"); //todo
+    if ((p_msg = (tBTA_DM_API_SET_ENCRYPTION *) GKI_getbuf(sizeof(tBTA_DM_API_SET_ENCRYPTION))) != NULL)
+    {
+        memset(p_msg, 0, sizeof(tBTA_DM_API_SET_ENCRYPTION));
+
+        p_msg->hdr.event = BTA_DM_API_SET_ENCRYPTION_EVT;
+
+        memcpy(p_msg->bd_addr, bd_addr, BD_ADDR_LEN);
+        p_msg->p_callback      = p_callback;
+        p_msg->sec_act         = sec_act;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
diff --git a/bta/dm/bta_dm_cfg.c b/bta/dm/bta_dm_cfg.c
new file mode 100644
index 0000000..5e26909
--- /dev/null
+++ b/bta/dm/bta_dm_cfg.c
@@ -0,0 +1,424 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the device
+ *  manager.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_dm_int.h"
+
+#ifndef BTA_DM_LINK_POLICY_SETTINGS
+#define BTA_DM_LINK_POLICY_SETTINGS    (HCI_ENABLE_MASTER_SLAVE_SWITCH | HCI_ENABLE_HOLD_MODE | HCI_ENABLE_SNIFF_MODE | HCI_ENABLE_PARK_MODE)
+#endif
+
+/* page timeout in 625uS */
+#ifndef BTA_DM_PAGE_TIMEOUT
+#define BTA_DM_PAGE_TIMEOUT    8192
+#endif
+
+/* link supervision timeout in 625uS (5 secs) */
+#ifndef BTA_DM_LINK_TIMEOUT
+#define BTA_DM_LINK_TIMEOUT    8000
+#endif
+
+/* For Insight, PM cfg lookup tables are runtime configurable (to allow tweaking of params for power consumption measurements) */
+#ifndef BTE_SIM_APP
+#define tBTA_DM_PM_TYPE_QUALIFIER   const
+#else
+#define tBTA_DM_PM_TYPE_QUALIFIER
+#endif
+
+
+const tBTA_DM_CFG bta_dm_cfg =
+{
+    /* mobile phone COD */
+    BTA_DM_COD,
+    /* link policy settings */
+    BTA_DM_LINK_POLICY_SETTINGS,
+    /* page timeout in 625uS */
+    BTA_DM_PAGE_TIMEOUT,
+    /* link supervision timeout in 625uS*/
+    BTA_DM_LINK_TIMEOUT,
+    /* TRUE to avoid scatternet when av is streaming (be the master) */
+    TRUE
+};
+
+#ifndef BTA_DM_SCATTERNET
+/* By default, allow partial scatternet */
+#define BTA_DM_SCATTERNET BTA_DM_PARTIAL_SCATTERNET
+#endif
+
+#ifndef BTA_HH_ROLE
+/* By default, do not specify HH role (backward compatibility) */
+#define BTA_HH_ROLE BTA_ANY_ROLE
+#endif
+
+#ifndef BTA_AV_ROLE
+/* By default, AV role (backward BTA_MASTER_ROLE_PREF) */
+#define BTA_AV_ROLE BTA_MASTER_ROLE_PREF
+#endif
+
+#define BTA_DM_NUM_RM_ENTRY    4
+
+/* appids for PAN used by insight sample application
+   these have to be same as defined in btui_int.h */
+#define BTUI_PAN_ID_PANU         0
+#define BTUI_PAN_ID_NAP          1
+#define BTUI_PAN_ID_GN           2
+
+/* First element is always for SYS:
+   app_id = # of entries table, cfg is
+   device scatternet support */
+const tBTA_DM_RM bta_dm_rm_cfg[] =
+{
+    {BTA_ID_SYS, BTA_DM_NUM_RM_ENTRY, BTA_DM_SCATTERNET},
+    {BTA_ID_PAN, BTUI_PAN_ID_NAP, BTA_MASTER_ROLE_ONLY},
+    {BTA_ID_PAN, BTUI_PAN_ID_GN, BTA_MASTER_ROLE_ONLY},
+    {BTA_ID_HH,  BTA_ALL_APP_ID, BTA_HH_ROLE},
+    {BTA_ID_AV,  BTA_ALL_APP_ID, BTA_AV_ROLE}
+};
+
+
+tBTA_DM_CFG *p_bta_dm_cfg = (tBTA_DM_CFG *)&bta_dm_cfg;
+
+tBTA_DM_RM *p_bta_dm_rm_cfg = (tBTA_DM_RM *)&bta_dm_rm_cfg;
+
+
+#define BTA_DM_NUM_PM_ENTRY         (15+BTA_DM_NUM_JV_ID)  /* number of entries in bta_dm_pm_cfg except the first */
+
+tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_CFG bta_dm_pm_cfg[] =
+{
+  {BTA_ID_SYS, BTA_DM_NUM_PM_ENTRY, 0},
+  {BTA_ID_AG,  BTA_ALL_APP_ID,      0},  /* ag uses first spec table for app id 0 */
+  {BTA_ID_CT,  1,                   1},  /* ct (BTA_ID_CT,APP ID=1) spec table */
+  {BTA_ID_CG,  BTA_ALL_APP_ID,      1},  /* cg resue ct spec table */
+  {BTA_ID_DG,  BTA_ALL_APP_ID,      2},  /* dg spec table */
+  {BTA_ID_AV,  BTA_ALL_APP_ID,      4},  /* av spec table */
+  {BTA_ID_FTC, BTA_ALL_APP_ID,      6},  /* ftc spec table */
+  {BTA_ID_FTS, BTA_ALL_APP_ID,      7},  /* fts spec table */
+  {BTA_ID_HD,  BTA_ALL_APP_ID,      3},  /* hd spec table */
+  {BTA_ID_HH,  BTA_ALL_APP_ID,      5},  /* hh spec table */
+  {BTA_ID_PBC, BTA_ALL_APP_ID,      2},  /* reuse dg spec table */
+  {BTA_ID_PBS, BTA_ALL_APP_ID,      7},  /* reuse fts spec table */
+  {BTA_ID_OPC, BTA_ALL_APP_ID,      6},  /* reuse ftc spec table */
+  {BTA_ID_OPS, BTA_ALL_APP_ID,      7},  /* reuse fts spec table */
+  {BTA_ID_MSE, BTA_ALL_APP_ID,      7},  /* reuse fts spec table */
+  {BTA_ID_JV1, BTA_ALL_APP_ID,      7},  /* reuse fts spec table */
+  {BTA_ID_JV2, BTA_ALL_APP_ID,      7},  /* reuse fts spec table */
+  {BTA_ID_HL,  BTA_ALL_APP_ID,      8}   /* reuse fts spec table */
+};
+
+
+#ifdef BTE_SIM_APP      /* For Insight builds only, see the detail below */
+#define BTA_DM_NUM_PM_SPEC      (9 + 2)  /* additional two */
+#else
+#define BTA_DM_NUM_PM_SPEC      9  /* additional JV*/
+#endif
+
+tBTA_DM_PM_TYPE_QUALIFIER tBTA_DM_PM_SPEC bta_dm_pm_spec[BTA_DM_NUM_PM_SPEC] =
+{
+  /* AG */
+ {
+  (BTA_DM_PM_SNIFF | BTA_DM_PM_PARK),                           /* allow park & sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},   /* conn open sniff  */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},   /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* app close */
+      {{BTA_DM_PM_SNIFF3, 5000},   {BTA_DM_PM_NO_ACTION, 0}},   /* sco open, active */
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},   /* sco close sniff  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* idle */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},   /* busy */
+      {{BTA_DM_PM_RETRY,  5000},   {BTA_DM_PM_NO_ACTION, 0}}    /* mode change retry */
+  }
+ },
+
+  /* CT */
+ {
+  (BTA_DM_PM_SNIFF | BTA_DM_PM_PARK),                           /* allow park & sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_PARK,   5000},  {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  park */
+      {{BTA_DM_PM_NO_PREF,   0},  {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},  {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},  {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_SNIFF,  5000},  {BTA_DM_PM_NO_ACTION, 0}},    /* sco open sniff */
+      {{BTA_DM_PM_PARK,   5000},  {BTA_DM_PM_NO_ACTION, 0}},    /* sco close  park */
+      {{BTA_DM_PM_NO_ACTION, 0},  {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_NO_ACTION, 0},  {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_RETRY,  5000},  {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+  /* DG */
+ {
+  (BTA_DM_PM_ACTIVE),                                             /* no power saving mode allowed */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  active */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close   */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+   /* HD */
+ {
+  (BTA_DM_PM_SNIFF | BTA_DM_PM_PARK),                            /* allow park & sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR3),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_SNIFF4, 5000},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  sniff */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close   */
+      {{BTA_DM_PM_SNIFF2, 5000},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_SNIFF4,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+   /* AV */
+ {
+  (BTA_DM_PM_SNIFF),                                             /* allow sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  sniff */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close   */
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+  /* HH */
+ {
+  (BTA_DM_PM_SNIFF | BTA_DM_PM_PARK),                            /* allow park & sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR1),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_SNIFF2, 7000},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  sniff */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close, used for HH suspend   */
+      {{BTA_DM_PM_SNIFF2, 7000},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_SNIFF2, 7000},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+  /* FTC, OPC */
+ {
+  (BTA_DM_PM_SNIFF),                                             /* allow sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  active */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close   */
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+  /* FTS, OPS */
+ {
+  (BTA_DM_PM_SNIFF),                                             /* allow sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn open  active */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},    /* conn close  */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco open  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},    /* sco close   */
+      {{BTA_DM_PM_SNIFF,  7000},   {BTA_DM_PM_NO_ACTION, 0}},    /* idle */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},    /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}     /* mode change retry */
+  }
+ },
+
+   /* HL */
+ {
+  (BTA_DM_PM_SNIFF),                                             /* allow sniff */
+#if (BTM_SSR_INCLUDED == TRUE)
+  (BTA_DM_PM_SSR2),                                              /* the SSR entry */
+#endif
+  {
+      {{BTA_DM_PM_SNIFF,  5000},   {BTA_DM_PM_NO_ACTION, 0}},   /* conn open sniff  */
+      {{BTA_DM_PM_NO_PREF,   0},   {BTA_DM_PM_NO_ACTION, 0}},   /* conn close  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* app open */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* app close */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* sco open, active */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* sco close sniff  */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}},   /* idle */
+      {{BTA_DM_PM_ACTIVE,    0},   {BTA_DM_PM_NO_ACTION, 0}},   /* busy */
+      {{BTA_DM_PM_NO_ACTION, 0},   {BTA_DM_PM_NO_ACTION, 0}}    /* mode change retry */
+  }
+ }
+
+#ifdef BTE_SIM_APP      /* For Insight builds only */
+ /* Entries at the end of the pm_spec table are user-defined (runtime configurable),
+    for power consumption experiments.
+    Insight finds the first user-defined entry by looking for the first BTA_DM_PM_NO_PREF.
+    The number of user_defined specs is defined by BTA_SWRAP_UD_PM_SPEC_COUNT */
+ ,
+ {BTA_DM_PM_NO_PREF},               /* pm_spec USER_DEFINED_0 */
+ {BTA_DM_PM_NO_PREF}                /* pm_spec USER_DEFINED_1 */
+#endif  /* BTE_SIM_APP */
+};
+
+tBTA_DM_PM_TYPE_QUALIFIER tBTM_PM_PWR_MD bta_dm_pm_md[] =
+{
+/* more sniff parameter entries can be added for BTA_DM_PM_SNIFF3 - BTA_DM_PM_SNIFF7, if needed
+When entries are added or removed, BTA_DM_PM_PARK_IDX needs to be updated to reflect the actual index
+BTA_DM_PM_PARK_IDX is defined in bta_api.h and can be override by the bdroid_buildcfg.h settings.
+The SNIFF table entries must be in the order from highest latency (biggest interval) to lowest latency.
+If there's a conflict among the connected services, the setting with lowest latency wins.
+*/
+/* sniff modes: max interval, min interval, attempt, timeout */
+  {800, 400, 4, 1, BTM_PM_MD_SNIFF}, /*for BTA_DM_PM_SNIFF - A2DP */
+  {400, 200, 4, 1, BTM_PM_MD_SNIFF}, /*for BTA_DM_PM_SNIFF1 */
+  {180, 150, 4, 1, BTM_PM_MD_SNIFF}, /*for BTA_DM_PM_SNIFF2- HD idle */
+  {150,  50, 4, 1, BTM_PM_MD_SNIFF}, /*for BTA_DM_PM_SNIFF3- SCO open */
+  { 54,  30, 4, 1, BTM_PM_MD_SNIFF}, /*for BTA_DM_PM_SNIFF4- HD active*/
+  {800, 400, 0, 0, BTM_PM_MD_PARK}
+
+#ifdef BTE_SIM_APP      /* For Insight builds only */
+  /* Entries at the end of the bta_dm_pm_md table are user-defined (runtime configurable),
+     for power consumption experiments.
+     Insight finds the first user-defined entry by looking for the first 'max=0'.
+     The number of user_defined specs is defined by BTA_SWRAP_UD_PM_DM_COUNT */
+  ,
+  {0},           /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_0 */
+  {0},           /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_0 */
+
+  {0},           /* CONN_OPEN/SCO_CLOSE power mode settings for pm_spec USER_DEFINED_1 */
+  {0}            /* SCO_OPEN power mode settings for pm_spec USER_DEFINED_1 */
+#endif  /* BTE_SIM_APP */
+};
+
+/* 0=max_lat -> no SSR */
+/* the smaller of the SSR max latency wins.
+ * the entries in this table must be from highest latency (biggest interval) to lowest latency */
+#if (BTM_SSR_INCLUDED == TRUE)
+tBTA_DM_SSR_SPEC bta_dm_ssr_spec[] =
+{
+    /*max_lat, min_rmt_to, min_loc_to*/
+    {0,      0, 0},     /* BTA_DM_PM_SSR0 - do not use SSR */
+    {1600,   2, 2},     /* BTA_DM_PM_SSR1 - HH */
+    {1200,   2, 2},     /* BTA_DM_PM_SSR2 - others (as long as sniff is allowed)*/
+    {360,  160, 2}      /* BTA_DM_PM_SSR3 - HD */
+};
+
+tBTA_DM_SSR_SPEC *p_bta_dm_ssr_spec = (tBTA_DM_SSR_SPEC *)&bta_dm_ssr_spec;
+#endif
+
+tBTA_DM_PM_CFG *p_bta_dm_pm_cfg = (tBTA_DM_PM_CFG *)&bta_dm_pm_cfg;
+tBTA_DM_PM_SPEC *p_bta_dm_pm_spec = (tBTA_DM_PM_SPEC *)&bta_dm_pm_spec;
+tBTM_PM_PWR_MD *p_bta_dm_pm_md = (tBTM_PM_PWR_MD *)&bta_dm_pm_md;
+
+/* The performance impact of EIR packet size
+**
+** When BTM_EIR_DEFAULT_FEC_REQUIRED is TRUE,
+** 1 to 17 bytes,    DM1 is used and most robust.
+** 18 to 121 bytes,  DM3 is used but impacts inquiry scan time with large number
+**                    of devices.(almost double with 150 users)
+** 122 to 224 bytes, DM5 is used but cause quite big performance loss even with
+**                    small number of users. so it is not recommended.
+** 225 to 240 bytes, DH5 is used without FEC but it not recommended.
+**                    (same reason of DM5)
+**
+** When BTM_EIR_DEFAULT_FEC_REQUIRED is FALSE,
+** 1 to 27 bytes,    DH1 is used but only robust at short range.
+** 28 to 183 bytes,  DH3 is used but only robust at short range and impacts inquiry
+**                    scan time with large number of devices.
+** 184 to 240 bytes, DH5 is used but it not recommended.
+*/
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )
+#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
+                                            /* for example */
+const UINT8 bta_dm_eir_uuid16_list[] = {    0x08, 0x11, /* Headset */
+                                            0x1E, 0x11, /* Handsfree */
+                                            0x0E, 0x11, /* AV Remote Control */
+                                            0x0B, 0x11, /* Audio Sink */
+};
+#endif
+
+/* Extended Inquiry Response */
+const tBTA_DM_EIR_CONF bta_dm_eir_cfg =
+{
+    50,    /* minimum length of local name when it is shortened */
+           /* if length of local name is longer than this and EIR has not enough */
+           /* room for all UUID list then local name is shortened to this length */
+#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
+    8,
+    (UINT8 *)bta_dm_eir_uuid16_list,
+#else
+    {   /* mask of UUID list in EIR */
+        0xFFFFFFFF, /* LSB is the first UUID of the first 32 UUIDs in BTM_EIR_UUID_LKUP_TBL */
+        0xFFFFFFFF  /* LSB is the first UUID of the next 32 UUIDs in BTM_EIR_UUID_LKUP_TBL */
+        /* BTM_EIR_UUID_LKUP_TBL can be overrided */
+    },
+#endif
+    NULL,   /* Inquiry TX power         */
+    0,      /* length of flags in bytes */
+    NULL,   /* flags for EIR */
+    0,      /* length of manufacturer specific in bytes */
+    NULL,   /* manufacturer specific */
+};
+tBTA_DM_EIR_CONF *p_bta_dm_eir_cfg = (tBTA_DM_EIR_CONF*)&bta_dm_eir_cfg;
+#endif
diff --git a/bta/dm/bta_dm_ci.c b/bta/dm/bta_dm_ci.c
new file mode 100644
index 0000000..5e2e312
--- /dev/null
+++ b/bta/dm/bta_dm_ci.c
@@ -0,0 +1,118 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the API implementation file for the BTA device manager.
+ *
+ ******************************************************************************/
+
+#include "gki.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_dm_int.h"
+#include <string.h>
+#include "bta_dm_ci.h"
+
+
+#if (BTM_OOB_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_ci_io_req
+**
+** Description      This function must be called in response to function
+**                  bta_dm_co_io_req(), if *p_oob_data to BTA_OOB_UNKNOWN
+**                  by bta_dm_co_io_req().
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_ci_io_req(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, tBTA_OOB_DATA oob_data,
+                                     tBTA_AUTH_REQ auth_req)
+
+{
+    tBTA_DM_CI_IO_REQ    *p_msg;
+
+    if ((p_msg = (tBTA_DM_CI_IO_REQ *) GKI_getbuf(sizeof(tBTA_DM_CI_IO_REQ))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_CI_IO_REQ_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->io_cap   = io_cap;
+        p_msg->oob_data = oob_data;
+        p_msg->auth_req = auth_req;
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_ci_rmt_oob
+**
+** Description      This function must be called in response to function
+**                  bta_dm_co_rmt_oob() to provide the OOB data associated
+**                  with the remote device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_ci_rmt_oob(BOOLEAN accept, BD_ADDR bd_addr, BT_OCTET16 c, BT_OCTET16 r)
+{
+    tBTA_DM_CI_RMT_OOB    *p_msg;
+
+    if ((p_msg = (tBTA_DM_CI_RMT_OOB *) GKI_getbuf(sizeof(tBTA_DM_CI_RMT_OOB))) != NULL)
+    {
+        p_msg->hdr.event = BTA_DM_CI_RMT_OOB_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->accept    = accept;
+        memcpy(p_msg->c, c, BT_OCTET16_LEN);
+        memcpy(p_msg->r, r, BT_OCTET16_LEN);
+        bta_sys_sendmsg(p_msg);
+    }
+}
+#endif /* BTM_OOB_INCLUDED */
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_sco_ci_data_ready
+**
+** Description      This function sends an event to indicating that the phone
+**                  has SCO data ready.
+**
+** Parameters       event: is obtained from bta_dm_sco_co_open() function, which
+**                          is the BTA event we want to send back to BTA module
+**                          when there is encoded data ready.
+**                  sco_handle: is the BTA sco handle which indicate a specific
+**                           SCO connection.
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sco_ci_data_ready(UINT16 event, UINT16 sco_handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = event;
+        p_buf->layer_specific = sco_handle;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+#endif
diff --git a/bta/dm/bta_dm_int.h b/bta/dm/bta_dm_int.h
new file mode 100644
index 0000000..35b369d
--- /dev/null
+++ b/bta/dm/bta_dm_int.h
@@ -0,0 +1,989 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA device manager.
+ *
+ ******************************************************************************/
+#ifndef BTA_DM_INT_H
+#define BTA_DM_INT_H
+
+#include "bt_target.h"
+
+#if (BLE_INCLUDED == TRUE && (defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+    #include "bta_gatt_api.h"
+#endif
+
+
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+
+#define BTA_COPY_DEVICE_CLASS(coddst, codsrc)   {((UINT8 *)(coddst))[0] = ((UINT8 *)(codsrc))[0]; \
+                                                 ((UINT8 *)(coddst))[1] = ((UINT8 *)(codsrc))[1];  \
+                                                 ((UINT8 *)(coddst))[2] = ((UINT8 *)(codsrc))[2];}
+
+
+#define BTA_DM_MSG_LEN 50
+
+#define BTA_SERVICE_ID_TO_SERVICE_MASK(id)       (1 << (id))
+
+/* DM events */
+enum
+{
+    /* device manager local device API events */
+    BTA_DM_API_ENABLE_EVT = BTA_SYS_EVT_START(BTA_ID_DM),
+    BTA_DM_API_DISABLE_EVT,
+    BTA_DM_API_SET_NAME_EVT,
+    BTA_DM_API_SET_VISIBILITY_EVT,
+    BTA_DM_API_SET_AFH_CHANNELS_EVT,
+    BTA_API_DM_SIG_STRENGTH_EVT,
+    BTA_DM_API_VENDOR_SPECIFIC_COMMAND_EVT,
+    BTA_DM_API_TX_INQPWR_EVT,
+    BTA_DM_ACL_CHANGE_EVT,
+    BTA_DM_API_ADD_DEVICE_EVT,
+
+    /* security API events */
+    BTA_DM_API_BOND_EVT,
+    BTA_DM_API_BOND_CANCEL_EVT,
+    BTA_DM_API_PIN_REPLY_EVT,
+    BTA_DM_API_LINK_POLICY_EVT,
+    BTA_DM_API_AUTH_REPLY_EVT,
+
+    /* power manger events */
+    BTA_DM_PM_BTM_STATUS_EVT,
+    BTA_DM_PM_TIMER_EVT,
+
+    /* simple pairing events */
+    BTA_DM_API_CONFIRM_EVT,
+
+    BTA_DM_API_SET_ENCRYPTION_EVT,
+
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+    BTA_DM_API_PASKY_CANCEL_EVT,
+#endif
+#if (BTM_OOB_INCLUDED == TRUE)
+    BTA_DM_API_LOC_OOB_EVT,
+    BTA_DM_CI_IO_REQ_EVT,
+    BTA_DM_CI_RMT_OOB_EVT,
+#endif /* BTM_OOB_INCLUDED */
+
+    BTA_DM_API_REMOVE_DEVICE_EVT,
+
+#if BLE_INCLUDED == TRUE
+    BTA_DM_API_ADD_BLEKEY_EVT,
+    BTA_DM_API_ADD_BLEDEVICE_EVT,
+    BTA_DM_API_BLE_PASSKEY_REPLY_EVT,
+    BTA_DM_API_BLE_SEC_GRANT_EVT,
+    BTA_DM_API_BLE_SET_BG_CONN_TYPE,
+    BTA_DM_API_BLE_CONN_PARAM_EVT,
+    BTA_DM_API_BLE_SCAN_PARAM_EVT,
+#endif
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    BTA_DM_API_UPDATE_EIR_UUID_EVT,
+#endif
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    BTA_DM_API_SET_EIR_CONFIG_EVT,
+#endif
+
+    BTA_DM_API_ENABLE_TEST_MODE_EVT,
+    BTA_DM_API_DISABLE_TEST_MODE_EVT,
+    BTA_DM_API_EXECUTE_CBACK_EVT,
+    BTA_DM_API_SET_AFH_CHANNEL_ASSESMENT_EVT,
+    BTA_DM_MAX_EVT
+};
+
+
+/* DM search events */
+enum
+{
+    /* DM search API events */
+    BTA_DM_API_SEARCH_EVT = BTA_SYS_EVT_START(BTA_ID_DM_SEARCH),
+    BTA_DM_API_SEARCH_CANCEL_EVT,
+    BTA_DM_API_DISCOVER_EVT,
+    BTA_DM_INQUIRY_CMPL_EVT,
+    BTA_DM_REMT_NAME_EVT,
+    BTA_DM_SDP_RESULT_EVT,
+    BTA_DM_SEARCH_CMPL_EVT,
+    BTA_DM_DISCOVERY_RESULT_EVT,
+    BTA_DM_API_DI_DISCOVER_EVT
+
+};
+
+/* data type for BTA_DM_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_DM_SEC_CBACK *p_sec_cback;
+} tBTA_DM_API_ENABLE;
+
+/* data type for BTA_DM_API_SET_NAME_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    char    name[BD_NAME_LEN];
+} tBTA_DM_API_SET_NAME;
+
+/* data type for BTA_DM_API_SET_VISIBILITY_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_DM_DISC    disc_mode;
+    tBTA_DM_CONN    conn_mode;
+    UINT8           pair_mode;
+    UINT8           conn_paired_only;
+} tBTA_DM_API_SET_VISIBILITY;
+
+/* data type for BTA_DM_API_SET_AFH_CHANNELS_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8           first;
+    UINT8           last;
+} tBTA_DM_API_SET_AFH_CHANNELS_EVT;
+
+/* data type for BTA_DM_API_VENDOR_SPECIFIC_COMMAND_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT16              opcode;
+    UINT8               param_len;
+    UINT8               *p_param_buf;
+    tBTA_VENDOR_CMPL_CBACK *p_cback;
+
+} tBTA_DM_API_VENDOR_SPECIFIC_COMMAND;
+
+enum
+{
+    BTA_DM_RS_NONE,     /* straight API call */
+    BTA_DM_RS_OK,       /* the role switch result - successful */
+    BTA_DM_RS_FAIL      /* the role switch result - failed */
+};
+typedef UINT8 tBTA_DM_RS_RES;
+
+/* data type for BTA_DM_API_SEARCH_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    tBTA_DM_INQ inq_params;
+    tBTA_SERVICE_MASK services;
+    tBTA_DM_SEARCH_CBACK * p_cback;
+    tBTA_DM_RS_RES  rs_res;
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    UINT8           num_uuid;
+    tBT_UUID        *p_uuid;
+#endif
+} tBTA_DM_API_SEARCH;
+
+/* data type for BTA_DM_API_DISCOVER_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+    tBTA_SERVICE_MASK services;
+    tBTA_DM_SEARCH_CBACK * p_cback;
+    BOOLEAN         sdp_search;
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+    UINT8           num_uuid;
+    tBT_UUID        *p_uuid;
+#endif
+    tSDP_UUID    uuid;
+} tBTA_DM_API_DISCOVER;
+
+/* data type for BTA_DM_API_DI_DISC_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+    tBTA_DISCOVERY_DB   *p_sdp_db;
+    UINT32              len;
+    tBTA_DM_SEARCH_CBACK * p_cback;
+}tBTA_DM_API_DI_DISC;
+
+/* data type for BTA_DM_API_BOND_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+} tBTA_DM_API_BOND;
+
+/* data type for BTA_DM_API_BOND_CANCEL_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    BD_ADDR         bd_addr;
+} tBTA_DM_API_BOND_CANCEL;
+
+/* data type for BTA_DM_API_PIN_REPLY_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+    BOOLEAN accept;
+    UINT8 pin_len;
+    UINT8 p_pin[PIN_CODE_LEN];
+} tBTA_DM_API_PIN_REPLY;
+
+/* data type for BTA_DM_API_LINK_POLICY_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+    UINT16      policy_mask;
+    BOOLEAN     set;
+} tBTA_DM_API_LINK_POLICY;
+
+/* data type for BTA_DM_API_AUTH_REPLY_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+    tBTA_SERVICE_ID service;
+    tBTA_AUTH_RESP response;
+} tBTA_DM_API_AUTH_REPLY;
+
+/* data type for BTA_DM_API_LOC_OOB_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+} tBTA_DM_API_LOC_OOB;
+
+/* data type for BTA_DM_API_CONFIRM_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+    BOOLEAN     accept;
+} tBTA_DM_API_CONFIRM;
+
+/* data type for BTA_DM_API_PASKY_CANCEL_EVT*/
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+} tBTA_DM_API_PASKY_CANCEL;
+
+/* data type for BTA_DM_CI_IO_REQ_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    BD_ADDR         bd_addr;
+    tBTA_IO_CAP     io_cap;
+    tBTA_OOB_DATA   oob_data;
+    tBTA_AUTH_REQ   auth_req;
+} tBTA_DM_CI_IO_REQ;
+
+/* data type for BTA_DM_CI_RMT_OOB_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+    BT_OCTET16  c;
+    BT_OCTET16  r;
+    BOOLEAN     accept;
+} tBTA_DM_CI_RMT_OOB;
+
+/* data type for BTA_DM_REMT_NAME_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    tBTA_DM_SEARCH  result;
+} tBTA_DM_REM_NAME;
+
+/* data type for tBTA_DM_DISC_RESULT */
+typedef struct
+{
+    BT_HDR      hdr;
+    tBTA_DM_SEARCH  result;
+} tBTA_DM_DISC_RESULT;
+
+
+/* data type for BTA_DM_INQUIRY_CMPL_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT8       num;
+} tBTA_DM_INQUIRY_CMPL;
+
+/* data type for BTA_DM_SDP_RESULT_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT16 sdp_result;
+} tBTA_DM_SDP_RESULT;
+
+/* data type for BTA_API_DM_SIG_STRENGTH_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    tBTA_SIG_STRENGTH_MASK mask;
+    UINT16 period;
+    BOOLEAN start;
+} tBTA_API_DM_SIG_STRENGTH;
+
+/* data type for tBTA_API_DM_TX_INQPWR */
+typedef struct
+{
+    BT_HDR      hdr;
+    INT8        tx_power;
+}tBTA_API_DM_TX_INQPWR;
+
+/* data type for BTA_DM_ACL_CHANGE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    tBTM_BL_EVENT   event;
+    UINT8           busy_level;
+    BOOLEAN         is_new;
+    UINT8           new_role;
+    BD_ADDR         bd_addr;
+    UINT8           hci_status;
+} tBTA_DM_ACL_CHANGE;
+
+/* data type for BTA_DM_PM_BTM_STATUS_EVT */
+typedef struct
+{
+
+    BT_HDR          hdr;
+    BD_ADDR         bd_addr;
+    tBTM_PM_STATUS  status;
+    UINT16          value;
+    UINT8           hci_status;
+
+} tBTA_DM_PM_BTM_STATUS;
+
+/* data type for BTA_DM_PM_TIMER_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    BD_ADDR         bd_addr;
+
+} tBTA_DM_PM_TIMER;
+
+
+/* data type for BTA_DM_API_ADD_DEVICE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+    DEV_CLASS           dc;
+    LINK_KEY            link_key;
+    tBTA_SERVICE_MASK   tm;
+    BOOLEAN             is_trusted;
+    UINT8               key_type;
+    tBTA_IO_CAP         io_cap;
+    BOOLEAN             link_key_known;
+    BOOLEAN             dc_known;
+    BD_NAME             bd_name;
+    BD_FEATURES         features;
+} tBTA_DM_API_ADD_DEVICE;
+
+/* data type for BTA_DM_API_REMOVE_ACL_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bd_addr;
+} tBTA_DM_API_REMOVE_DEVICE;
+
+/* data type for BTA_DM_API_EXECUTE_CBACK_EVT */
+typedef struct
+{
+    BT_HDR               hdr;
+    void *               p_param;
+    tBTA_DM_EXEC_CBACK  *p_exec_cback;
+} tBTA_DM_API_EXECUTE_CBACK;
+
+/* data type for tBTA_DM_API_SET_ENCRYPTION */
+typedef struct
+{
+    BT_HDR                    hdr;
+    tBTA_DM_ENCRYPT_CBACK     *p_callback;
+    tBTA_DM_BLE_SEC_ACT       sec_act;
+    BD_ADDR                   bd_addr;
+} tBTA_DM_API_SET_ENCRYPTION;
+
+#if BLE_INCLUDED == TRUE
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 bd_addr;
+    tBTA_LE_KEY_VALUE       blekey;
+    tBTA_LE_KEY_TYPE        key_type;
+
+}tBTA_DM_API_ADD_BLEKEY;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 bd_addr;
+    tBT_DEVICE_TYPE         dev_type ;
+    tBLE_ADDR_TYPE          addr_type;
+
+}tBTA_DM_API_ADD_BLE_DEVICE;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 bd_addr;
+    BOOLEAN                 accept;
+    UINT32                  passkey;
+}tBTA_DM_API_PASSKEY_REPLY;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 bd_addr;
+    tBTA_DM_BLE_SEC_GRANT   res;
+}tBTA_DM_API_BLE_SEC_GRANT;
+
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_DM_BLE_CONN_TYPE   bg_conn_type;
+    tBTA_DM_BLE_SEL_CBACK   *p_select_cback;
+}tBTA_DM_API_BLE_SET_BG_CONN_TYPE;
+
+/* set prefered BLE connection parameters for a device */
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 peer_bda;
+    UINT16                  conn_int_min;
+    UINT16                  conn_int_max;
+    UINT16                  supervision_tout;
+    UINT16                  slave_latency;
+
+}tBTA_DM_API_BLE_CONN_PARAMS;
+
+/* set scan parameter for BLE connections */
+typedef struct
+{
+    BT_HDR                  hdr;
+    UINT16                  scan_int;
+    UINT16                  scan_window;
+}tBTA_DM_API_BLE_SCAN_PARAMS;
+
+#endif
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BOOLEAN                 enable_or_disable;
+}tBTA_DM_API_SET_AFH_CHANNEL_ASSESSMENT;
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+/* data type for BTA_DM_API_UPDATE_EIR_UUID_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    BOOLEAN         is_add;
+    tBT_UUID        uuid;
+}tBTA_DM_API_UPDATE_EIR_UUID;
+#endif
+
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+/* data type for BTA_DM_API_SET_EIR_CONFIG_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_DM_EIR_CONF    *p_eir_cfg;
+}tBTA_DM_API_SET_EIR_CONFIG;
+#endif
+
+/* union of all data types */
+typedef union
+{
+    /* GKI event buffer header */
+    BT_HDR              hdr;
+    tBTA_DM_API_ENABLE  enable;
+
+    tBTA_DM_API_SET_NAME set_name;
+
+    tBTA_DM_API_SET_VISIBILITY set_visibility;
+
+    tBTA_DM_API_SET_AFH_CHANNELS_EVT set_afhchannels;
+
+    tBTA_DM_API_VENDOR_SPECIFIC_COMMAND vendor_command;
+
+    tBTA_DM_API_ADD_DEVICE  add_dev;
+
+    tBTA_DM_API_REMOVE_DEVICE remove_dev;
+
+    tBTA_DM_API_SEARCH search;
+
+    tBTA_DM_API_DISCOVER discover;
+
+    tBTA_DM_API_BOND bond;
+
+    tBTA_DM_API_BOND_CANCEL bond_cancel;
+
+    tBTA_DM_API_PIN_REPLY pin_reply;
+    tBTA_DM_API_LINK_POLICY link_policy;
+
+    tBTA_DM_API_LOC_OOB     loc_oob;
+    tBTA_DM_API_CONFIRM     confirm;
+    tBTA_DM_API_PASKY_CANCEL passkey_cancel;
+    tBTA_DM_CI_IO_REQ       ci_io_req;
+    tBTA_DM_CI_RMT_OOB      ci_rmt_oob;
+
+    tBTA_DM_API_AUTH_REPLY auth_reply;
+
+    tBTA_DM_REM_NAME rem_name;
+
+    tBTA_DM_DISC_RESULT disc_result;
+
+    tBTA_DM_INQUIRY_CMPL inq_cmpl;
+
+    tBTA_DM_SDP_RESULT sdp_event;
+
+    tBTA_API_DM_SIG_STRENGTH sig_strength;
+
+    tBTA_API_DM_TX_INQPWR   tx_inq_pwr;
+
+    tBTA_DM_ACL_CHANGE  acl_change;
+
+    tBTA_DM_PM_BTM_STATUS pm_status;
+
+    tBTA_DM_PM_TIMER pm_timer;
+
+    tBTA_DM_API_DI_DISC     di_disc;
+
+    tBTA_DM_API_EXECUTE_CBACK exec_cback;
+
+    tBTA_DM_API_SET_ENCRYPTION     set_encryption;
+
+#if BLE_INCLUDED == TRUE
+    tBTA_DM_API_ADD_BLEKEY              add_ble_key;
+    tBTA_DM_API_ADD_BLE_DEVICE          add_ble_device;
+    tBTA_DM_API_PASSKEY_REPLY           ble_passkey_reply;
+    tBTA_DM_API_BLE_SEC_GRANT           ble_sec_grant;
+    tBTA_DM_API_BLE_SET_BG_CONN_TYPE    ble_set_bd_conn_type;
+    tBTA_DM_API_BLE_CONN_PARAMS         ble_set_conn_params;
+    tBTA_DM_API_BLE_SCAN_PARAMS         ble_set_scan_params;
+#endif
+
+    tBTA_DM_API_SET_AFH_CHANNEL_ASSESSMENT set_afh_channel_assessment;
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    tBTA_DM_API_UPDATE_EIR_UUID     update_eir_uuid;
+#endif
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    tBTA_DM_API_SET_EIR_CONFIG          set_eir_cfg;
+#endif
+
+} tBTA_DM_MSG;
+
+
+#define BTA_DM_NUM_PEER_DEVICE 7
+
+#define BTA_DM_NOT_CONNECTED  0
+#define BTA_DM_CONNECTED      1
+#define BTA_DM_UNPAIRING      2
+typedef UINT8 tBTA_DM_CONN_STATE;
+
+
+#define BTA_DM_DI_NONE          0x00       /* nothing special */
+#define BTA_DM_DI_USE_SSR       0x10       /* set this bit if ssr is supported for this link */
+#define BTA_DM_DI_AV_ACTIVE     0x20       /* set this bit if AV is active for this link */
+#define BTA_DM_DI_SET_SNIFF     0x01       /* set this bit if call BTM_SetPowerMode(sniff) */
+#define BTA_DM_DI_INT_SNIFF     0x02       /* set this bit if call BTM_SetPowerMode(sniff) & enter sniff mode */
+#define BTA_DM_DI_ACP_SNIFF     0x04       /* set this bit if peer init sniff */
+typedef UINT8 tBTA_DM_DEV_INFO;
+
+typedef struct
+{
+    BD_ADDR                     peer_bdaddr;
+    UINT16                      link_policy;
+    tBTA_DM_CONN_STATE          conn_state;
+    tBTA_PREF_ROLES             pref_role;
+    BOOLEAN                     in_use;
+    tBTA_DM_DEV_INFO            info;
+#if (BTM_SSR_INCLUDED == TRUE)
+    tBTM_PM_STATUS              prev_low;   /* previous low power mode used */
+#endif
+    tBTA_DM_PM_ACTTION          pm_mode_attempted;
+    tBTA_DM_PM_ACTTION          pm_mode_failed;
+
+} tBTA_DM_PEER_DEVICE;
+
+
+
+/* structure to store list of
+  active connections */
+typedef struct
+{
+    tBTA_DM_PEER_DEVICE    peer_device[BTA_DM_NUM_PEER_DEVICE];
+    UINT8                  count;
+
+} tBTA_DM_ACTIVE_LINK;
+
+
+typedef struct
+{
+    BD_ADDR                 peer_bdaddr;
+    tBTA_SYS_ID             id;
+    UINT8                   app_id;
+    tBTA_SYS_CONN_STATUS    state;
+
+
+} tBTA_DM_SRVCS;
+
+#define BTA_DM_NUM_CONN_SRVS   5
+
+typedef struct
+{
+
+    UINT8 count;
+    tBTA_DM_SRVCS  conn_srvc[BTA_DM_NUM_CONN_SRVS];
+
+}  tBTA_DM_CONNECTED_SRVCS;
+
+typedef struct
+{
+    TIMER_LIST_ENT          timer;
+    BD_ADDR                 peer_bdaddr;
+    BOOLEAN                 in_use;
+
+} tBTA_PM_TIMER;
+
+extern tBTA_DM_CONNECTED_SRVCS bta_dm_conn_srvcs;
+
+#define BTA_DM_NUM_PM_TIMER 3
+
+/* DM control block */
+typedef struct
+{
+    BOOLEAN                     is_bta_dm_active;
+    tBTA_DM_ACTIVE_LINK         device_list;
+    tBTA_DM_SEC_CBACK           *p_sec_cback;
+    TIMER_LIST_ENT              signal_strength_timer;
+    tBTA_SIG_STRENGTH_MASK      signal_strength_mask;
+    UINT16                      state;
+    UINT16                      signal_strength_period;
+    BOOLEAN                     disabling;
+    TIMER_LIST_ENT              disable_timer;
+    UINT32                      wbt_sdp_handle;          /* WIDCOMM Extensions SDP record handle */
+    UINT8                       wbt_scn;                 /* WIDCOMM Extensions SCN */
+    UINT8                       num_master_only;
+    UINT8                       pm_id;
+    tBTA_PM_TIMER               pm_timer[BTA_DM_NUM_PM_TIMER];
+    UINT32                      role_policy_mask;   /* the bits set indicates the modules that wants to remove role switch from the default link policy */
+    UINT16                      cur_policy;         /* current default link policy */
+    UINT16                      rs_event;           /* the event waiting for role switch */
+    UINT8                       cur_av_count;       /* current AV connecions */
+    BOOLEAN                     disable_pair_mode;          /* disable pair mode or not */
+    BOOLEAN                     conn_paired_only;   /* allow connectable to paired device only or not */
+    tBTA_DM_API_SEARCH          search_msg;
+    UINT16                      page_scan_interval;
+    UINT16                      page_scan_window;
+    UINT16                      inquiry_scan_interval;
+    UINT16                      inquiry_scan_window;
+
+    /* Storage for pin code request parameters */
+    BD_ADDR                     pin_bd_addr;
+    DEV_CLASS                   pin_dev_class;
+    tBTA_DM_SEC_EVT             pin_evt;
+    UINT32          num_val;        /* the numeric value for comparison. If just_works, do not show this number to UI */
+    BOOLEAN         just_works;     /* TRUE, if "Just Works" association model */
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )
+    /* store UUID list for EIR */
+    TIMER_LIST_ENT              app_ready_timer;
+    UINT32                      eir_uuid[BTM_EIR_SERVICE_ARRAY_SIZE];
+#if (BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    tBT_UUID                    custom_uuid[BTA_EIR_SERVER_NUM_CUSTOM_UUID];
+#endif
+
+#endif
+
+    tBTA_DM_ENCRYPT_CBACK      *p_encrypt_cback;
+    tBTA_DM_BLE_SEC_ACT         sec_act;
+    TIMER_LIST_ENT              switch_delay_timer;
+
+} tBTA_DM_CB;
+
+#ifndef BTA_DM_SDP_DB_SIZE
+#define BTA_DM_SDP_DB_SIZE 250
+#endif
+
+/* DM search control block */
+typedef struct
+{
+
+    tBTA_DM_SEARCH_CBACK * p_search_cback;
+    tBTM_INQ_INFO        * p_btm_inq_info;
+    tBTA_SERVICE_MASK      services;
+    tBTA_SERVICE_MASK      services_to_search;
+    tBTA_SERVICE_MASK      services_found;
+    tSDP_DISCOVERY_DB    * p_sdp_db;
+    UINT16                 state;
+    BD_ADDR                peer_bdaddr;
+    BOOLEAN                name_discover_done;
+    char                   peer_name[BD_NAME_LEN];
+    TIMER_LIST_ENT         search_timer;
+    UINT8                  service_index;
+    tBTA_DM_MSG          * p_search_queue;   /* search or discover commands during search cancel stored here */
+    BOOLEAN                wait_disc;
+    BOOLEAN                sdp_results;
+    tSDP_UUID              uuid;
+    UINT8                  peer_scn;
+    BOOLEAN                sdp_search;
+
+#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
+#if ((defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+    tBTA_GATTC_IF          client_if;
+    UINT8                  num_uuid;
+    tBT_UUID               *p_srvc_uuid;
+    UINT8                  uuid_to_search;
+    BOOLEAN                gatt_disc_active;
+    UINT16                 conn_id;
+    UINT8 *                 p_ble_rawdata;
+    UINT32                 ble_raw_size;
+    UINT32                 ble_raw_used;
+#endif
+#endif
+
+
+} tBTA_DM_SEARCH_CB;
+
+/* DI control block */
+typedef struct
+{
+    tSDP_DISCOVERY_DB    * p_di_db;     /* pointer to the DI discovery database */
+    UINT8               di_num;         /* total local DI record number */
+    UINT32              di_handle[BTA_DI_NUM_MAX];  /* local DI record handle, the first one is primary record */
+}tBTA_DM_DI_CB;
+
+/* DM search state */
+enum
+{
+
+    BTA_DM_SEARCH_IDLE,
+    BTA_DM_SEARCH_ACTIVE,
+    BTA_DM_SEARCH_CANCELLING,
+    BTA_DM_DISCOVER_ACTIVE
+
+};
+
+
+
+typedef struct
+{
+    DEV_CLASS      dev_class;          /* local device class */
+    UINT16         policy_settings;    /* link policy setting hold, sniff, park, MS switch */
+    UINT16         page_timeout;       /* timeout for page in slots */
+    UINT16         link_timeout;       /* link supervision timeout in slots */
+    BOOLEAN        avoid_scatter;      /* TRUE to avoid scatternet when av is streaming (be the master) */
+
+} tBTA_DM_CFG;
+
+extern const UINT32 bta_service_id_to_btm_srv_id_lkup_tbl[];
+
+extern const tBTA_DM_CFG bta_dm_cfg;
+
+
+
+#define BTA_ALL_APP_ID 0xff
+
+typedef struct
+{
+    UINT8   id;
+    UINT8   app_id;
+    UINT8   cfg;
+
+} tBTA_DM_RM ;
+
+extern tBTA_DM_CFG *p_bta_dm_cfg;
+extern tBTA_DM_RM *p_bta_dm_rm_cfg;
+
+typedef struct
+{
+
+  UINT8  id;
+  UINT8  app_id;
+  UINT8  spec_idx;  /* index of spec table to use */
+
+} tBTA_DM_PM_CFG;
+
+
+typedef struct
+{
+
+  tBTA_DM_PM_ACTTION  power_mode;
+  UINT16              timeout;
+
+} tBTA_DM_PM_ACTN;
+
+typedef struct
+{
+
+  UINT8  allow_mask;         /* mask of sniff/hold/park modes to allow */
+#if (BTM_SSR_INCLUDED == TRUE)
+  UINT8  ssr;                /* set SSR on conn open/unpark */
+#endif
+  tBTA_DM_PM_ACTN actn_tbl [BTA_DM_PM_NUM_EVTS][2];
+
+} tBTA_DM_PM_SPEC;
+
+typedef struct
+{
+    UINT16      max_lat;
+    UINT16      min_rmt_to;
+    UINT16      min_loc_to;
+} tBTA_DM_SSR_SPEC;
+
+typedef struct
+{
+   UINT16 manufacturer;
+   UINT16 lmp_sub_version;
+   UINT8 lmp_version;
+}tBTA_DM_LMP_VER_INFO;
+
+extern tBTA_DM_PM_CFG *p_bta_dm_pm_cfg;
+extern tBTA_DM_PM_SPEC *p_bta_dm_pm_spec;
+extern tBTM_PM_PWR_MD *p_bta_dm_pm_md;
+#if (BTM_SSR_INCLUDED == TRUE)
+extern tBTA_DM_SSR_SPEC *p_bta_dm_ssr_spec;
+#endif
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )
+/* update dynamic BRCM Aware EIR data */
+extern const tBTA_DM_EIR_CONF bta_dm_eir_cfg;
+extern tBTA_DM_EIR_CONF *p_bta_dm_eir_cfg;
+#endif
+
+/* DM control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_DM_CB  bta_dm_cb;
+#else
+extern tBTA_DM_CB *bta_dm_cb_ptr;
+#define bta_dm_cb (*bta_dm_cb_ptr)
+#endif
+
+/* DM search control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_DM_SEARCH_CB  bta_dm_search_cb;
+#else
+extern tBTA_DM_SEARCH_CB *bta_dm_search_cb_ptr;
+#define bta_dm_search_cb (*bta_dm_search_cb_ptr)
+#endif
+
+/* DI control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_DM_DI_CB  bta_dm_di_cb;
+#else
+extern tBTA_DM_DI_CB *bta_dm_di_cb_ptr;
+#define bta_dm_di_cb (*bta_dm_di_cb_ptr)
+#endif
+
+extern BOOLEAN bta_dm_sm_execute(BT_HDR *p_msg);
+extern void bta_dm_sm_disable( void );
+extern BOOLEAN bta_dm_search_sm_execute(BT_HDR *p_msg);
+extern void bta_dm_search_sm_disable( void );
+
+
+extern void bta_dm_enable (tBTA_DM_MSG *p_data);
+extern void bta_dm_disable (tBTA_DM_MSG *p_data);
+extern void bta_dm_set_dev_name (tBTA_DM_MSG *p_data);
+extern void bta_dm_set_visibility (tBTA_DM_MSG *p_data);
+extern void bta_dm_set_afhchannels (tBTA_DM_MSG *p_data);
+extern void bta_dm_vendor_spec_command(tBTA_DM_MSG *p_data);
+extern void bta_dm_bond (tBTA_DM_MSG *p_data);
+extern void bta_dm_bond_cancel (tBTA_DM_MSG *p_data);
+extern void bta_dm_pin_reply (tBTA_DM_MSG *p_data);
+extern void bta_dm_link_policy (tBTA_DM_MSG *p_data);
+extern void bta_dm_auth_reply (tBTA_DM_MSG *p_data);
+extern void bta_dm_signal_strength(tBTA_DM_MSG *p_data);
+extern void bta_dm_tx_inqpower(tBTA_DM_MSG *p_data);
+extern void bta_dm_acl_change(tBTA_DM_MSG *p_data);
+extern void bta_dm_add_device (tBTA_DM_MSG *p_data);
+extern void bta_dm_remove_device (tBTA_DM_MSG *p_data);
+
+
+extern void bta_dm_pm_btm_status(tBTA_DM_MSG *p_data);
+extern void bta_dm_pm_timer(tBTA_DM_MSG *p_data);
+extern void bta_dm_add_ampkey (tBTA_DM_MSG *p_data);
+
+#if BLE_INCLUDED == TRUE
+extern void bta_dm_add_blekey (tBTA_DM_MSG *p_data);
+extern void bta_dm_add_ble_device (tBTA_DM_MSG *p_data);
+extern void bta_dm_ble_passkey_reply (tBTA_DM_MSG *p_data);
+extern void bta_dm_security_grant (tBTA_DM_MSG *p_data);
+extern void bta_dm_ble_set_bg_conn_type (tBTA_DM_MSG *p_data);
+extern void bta_dm_ble_set_conn_params (tBTA_DM_MSG *p_data);
+extern void bta_dm_ble_set_scan_params (tBTA_DM_MSG *p_data);
+#endif
+extern void bta_dm_set_encryption(tBTA_DM_MSG *p_data);
+extern void bta_dm_confirm(tBTA_DM_MSG *p_data);
+extern void bta_dm_passkey_cancel(tBTA_DM_MSG *p_data);
+#if (BTM_OOB_INCLUDED == TRUE)
+extern void bta_dm_loc_oob(tBTA_DM_MSG *p_data);
+extern void bta_dm_ci_io_req_act(tBTA_DM_MSG *p_data);
+extern void bta_dm_ci_rmt_oob_act(tBTA_DM_MSG *p_data);
+#endif /* BTM_OOB_INCLUDED */
+
+extern void bta_dm_init_pm(void);
+extern void bta_dm_disable_pm(void);
+
+extern void bta_dm_search_start (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_cancel (tBTA_DM_MSG *p_data);
+extern void bta_dm_discover (tBTA_DM_MSG *p_data);
+extern void bta_dm_di_disc (tBTA_DM_MSG *p_data);
+extern void bta_dm_inq_cmpl (tBTA_DM_MSG *p_data);
+extern void bta_dm_rmt_name (tBTA_DM_MSG *p_data);
+extern void bta_dm_sdp_result (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_cmpl (tBTA_DM_MSG *p_data);
+extern void bta_dm_free_sdp_db (tBTA_DM_MSG *p_data);
+extern void bta_dm_disc_result (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_result (tBTA_DM_MSG *p_data);
+extern void bta_dm_discovery_cmpl (tBTA_DM_MSG *p_data);
+extern void bta_dm_queue_search (tBTA_DM_MSG *p_data);
+extern void bta_dm_queue_disc (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_clear_queue (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_cancel_cmpl (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_cancel_notify (tBTA_DM_MSG *p_data);
+extern void bta_dm_search_cancel_transac_cmpl(tBTA_DM_MSG *p_data);
+extern void bta_dm_disc_rmt_name (tBTA_DM_MSG *p_data);
+extern tBTA_DM_PEER_DEVICE * bta_dm_find_peer_device(BD_ADDR peer_addr);
+
+extern void bta_dm_pm_active(BD_ADDR peer_addr);
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )
+void bta_dm_eir_update_uuid(UINT16 uuid16, BOOLEAN adding);
+#else
+#define bta_dm_eir_update_uuid(x, y)
+#endif
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+extern void bta_dm_update_eir_uuid (tBTA_DM_MSG *p_data);
+#endif
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+extern void bta_dm_set_eir_config (tBTA_DM_MSG *p_data);
+#endif
+extern void bta_dm_enable_test_mode(tBTA_DM_MSG *p_data);
+extern void bta_dm_disable_test_mode(tBTA_DM_MSG *p_data);
+extern void bta_dm_execute_callback(tBTA_DM_MSG *p_data);
+
+extern void bta_dm_set_afh_channel_assesment(tBTA_DM_MSG *p_data);
+
+#endif /* BTA_DM_INT_H */
+
diff --git a/bta/dm/bta_dm_main.c b/bta/dm/bta_dm_main.c
new file mode 100644
index 0000000..a2fec04
--- /dev/null
+++ b/bta/dm/bta_dm_main.c
@@ -0,0 +1,345 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the main implementation file for the BTA device manager.
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_dm_int.h"
+
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_DM_CB  bta_dm_cb;
+tBTA_DM_SEARCH_CB bta_dm_search_cb;
+tBTA_DM_DI_CB       bta_dm_di_cb;
+#endif
+
+
+#define BTA_DM_NUM_ACTIONS  (BTA_DM_MAX_EVT & 0x00ff)
+
+/* type for action functions */
+typedef void (*tBTA_DM_ACTION)(tBTA_DM_MSG *p_data);
+
+/* action function list */
+const tBTA_DM_ACTION bta_dm_action[] =
+{
+
+    /* device manager local device API events */
+    bta_dm_enable,            /* 0  BTA_DM_API_ENABLE_EVT */
+    bta_dm_disable,           /* 1  BTA_DM_API_DISABLE_EVT */
+    bta_dm_set_dev_name,      /* 2  BTA_DM_API_SET_NAME_EVT */
+    bta_dm_set_visibility,    /* 3  BTA_DM_API_SET_VISIBILITY_EVT */
+    bta_dm_set_afhchannels,   /* 4  BTA_DM_API_SET_AFH_CHANNELS_EVT */
+    bta_dm_signal_strength,   /* 5  BTA_API_DM_SIG_STRENGTH_EVT */
+    bta_dm_vendor_spec_command,/* 6  BTA_DM_API_VENDOR_SPECIFIC_COMMAND_EVT */
+    bta_dm_tx_inqpower,       /* 7  BTA_DM_API_SIG_STRENGTH_EVT */
+    bta_dm_acl_change,        /* 8  BTA_DM_ACL_CHANGE_EVT */
+    bta_dm_add_device,        /* 9  BTA_DM_API_ADD_DEVICE_EVT */
+
+    /* security API events */
+    bta_dm_bond,              /* 10  BTA_DM_API_BOND_EVT */
+    bta_dm_bond_cancel,       /* 11  BTA_DM_API_BOND_CANCEL_EVT */
+    bta_dm_pin_reply,         /* 12 BTA_DM_API_PIN_REPLY_EVT */
+    bta_dm_link_policy,       /* 13 BTA_DM_API_LINK_POLICY_EVT */
+    bta_dm_auth_reply,        /* 14 BTA_DM_API_AUTH_REPLY_EVT */
+
+    /* power manger events */
+    bta_dm_pm_btm_status,     /* 15 BTA_DM_PM_BTM_STATUS_EVT */
+    bta_dm_pm_timer,          /* 16 BTA_DM_PM_TIMER_EVT*/
+
+    /* simple pairing events */
+    bta_dm_confirm,           /* 17 BTA_DM_API_CONFIRM_EVT */
+
+    bta_dm_set_encryption,    /* BTA_DM_API_SET_ENCRYPTION_EVT */
+
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+    bta_dm_passkey_cancel,    /* 19 BTA_DM_API_PASKY_CANCEL_EVT */
+#endif
+#if (BTM_OOB_INCLUDED == TRUE)
+    bta_dm_loc_oob,           /* 20 BTA_DM_API_LOC_OOB_EVT */
+    bta_dm_ci_io_req_act,     /* 21 BTA_DM_CI_IO_REQ_EVT */
+    bta_dm_ci_rmt_oob_act,    /* 22 BTA_DM_CI_RMT_OOB_EVT */
+#endif /* BTM_OOB_INCLUDED */
+
+    bta_dm_remove_device,      /*  BTA_DM_API_REMOVE_DEVICE_EVT */
+
+#if BLE_INCLUDED == TRUE
+    bta_dm_add_blekey,          /*  BTA_DM_API_ADD_BLEKEY_EVT           */
+    bta_dm_add_ble_device,      /*  BTA_DM_API_ADD_BLEDEVICE_EVT        */
+    bta_dm_ble_passkey_reply,   /*  BTA_DM_API_BLE_PASSKEY_REPLY_EVT    */
+    bta_dm_security_grant,
+    bta_dm_ble_set_bg_conn_type,
+    bta_dm_ble_set_conn_params,      /* BTA_DM_API_BLE_CONN_PARAM_EVT */
+    bta_dm_ble_set_scan_params,      /* BTA_DM_API_BLE_SCAN_PARAM_EVT */
+#endif
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&( BTA_EIR_CANNED_UUID_LIST != TRUE )&&(BTA_EIR_SERVER_NUM_CUSTOM_UUID > 0)
+    bta_dm_update_eir_uuid,     /*  BTA_DM_API_UPDATE_EIR_UUID_EVT      */
+#endif
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    bta_dm_set_eir_config,      /*  BTA_DM_API_SET_EIR_CONFIG_EVT       */
+#endif
+
+    bta_dm_enable_test_mode,    /*  BTA_DM_API_ENABLE_TEST_MODE_EVT     */
+    bta_dm_disable_test_mode,   /*  BTA_DM_API_DISABLE_TEST_MODE_EVT    */
+    bta_dm_execute_callback,     /*  BTA_DM_API_EXECUTE_CBACK_EVT        */
+    bta_dm_set_afh_channel_assesment      /* BTA_DM_API_SET_AFH_CHANNEL_ASSESMENT_EVT */
+};
+
+
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_DM_API_SEARCH,                  /* 0 bta_dm_search_start */
+    BTA_DM_API_SEARCH_CANCEL,           /* 1 bta_dm_search_cancel */
+    BTA_DM_API_DISCOVER,                /* 2 bta_dm_discover */
+    BTA_DM_INQUIRY_CMPL,                /* 3 bta_dm_inq_cmpl */
+    BTA_DM_REMT_NAME,                   /* 4 bta_dm_rmt_name */
+    BTA_DM_SDP_RESULT,                  /* 5 bta_dm_sdp_result */
+    BTA_DM_SEARCH_CMPL,                 /* 6 bta_dm_search_cmpl*/
+    BTA_DM_FREE_SDP_DB,                 /* 7 bta_dm_free_sdp_db */
+    BTA_DM_DISC_RESULT,                 /* 8 bta_dm_disc_result */
+    BTA_DM_SEARCH_RESULT,               /* 9 bta_dm_search_result */
+    BTA_DM_QUEUE_SEARCH,                /* 10 bta_dm_queue_search */
+    BTA_DM_QUEUE_DISC,                  /* 11 bta_dm_queue_disc */
+    BTA_DM_SEARCH_CLEAR_QUEUE,          /* 12 bta_dm_search_clear_queue */
+    BTA_DM_SEARCH_CANCEL_CMPL,          /* 13 bta_dm_search_cancel_cmpl */
+    BTA_DM_SEARCH_CANCEL_NOTIFY,        /* 14 bta_dm_search_cancel_notify */
+    BTA_DM_SEARCH_CANCEL_TRANSAC_CMPL,  /* 15 bta_dm_search_cancel_transac_cmpl */
+    BTA_DM_DISC_RMT_NAME,               /* 16 bta_dm_disc_rmt_name */
+    BTA_DM_API_DI_DISCOVER,             /* 17 bta_dm_di_disc */
+    BTA_DM_SEARCH_NUM_ACTIONS           /* 18 */
+};
+
+
+/* action function list */
+const tBTA_DM_ACTION bta_dm_search_action[] =
+{
+
+  bta_dm_search_start,              /* 0 BTA_DM_API_SEARCH */
+  bta_dm_search_cancel,             /* 1 BTA_DM_API_SEARCH_CANCEL */
+  bta_dm_discover,                  /* 2 BTA_DM_API_DISCOVER */
+  bta_dm_inq_cmpl,                  /* 3 BTA_DM_INQUIRY_CMPL */
+  bta_dm_rmt_name,                  /* 4 BTA_DM_REMT_NAME */
+  bta_dm_sdp_result,                /* 5 BTA_DM_SDP_RESULT */
+  bta_dm_search_cmpl,               /* 6 BTA_DM_SEARCH_CMPL */
+  bta_dm_free_sdp_db,               /* 7 BTA_DM_FREE_SDP_DB */
+  bta_dm_disc_result,               /* 8 BTA_DM_DISC_RESULT */
+  bta_dm_search_result,             /* 9 BTA_DM_SEARCH_RESULT */
+  bta_dm_queue_search,              /* 10 BTA_DM_QUEUE_SEARCH */
+  bta_dm_queue_disc,                /* 11 BTA_DM_QUEUE_DISC */
+  bta_dm_search_clear_queue,        /* 12 BTA_DM_SEARCH_CLEAR_QUEUE */
+  bta_dm_search_cancel_cmpl,        /* 13 BTA_DM_SEARCH_CANCEL_CMPL */
+  bta_dm_search_cancel_notify,      /* 14 BTA_DM_SEARCH_CANCEL_NOTIFY */
+  bta_dm_search_cancel_transac_cmpl, /* 15 BTA_DM_SEARCH_CANCEL_TRANSAC_CMPL */
+  bta_dm_disc_rmt_name,             /* 16 BTA_DM_DISC_RMT_NAME */
+  bta_dm_di_disc                    /* 17 BTA_DM_API_DI_DISCOVER */
+};
+
+#define BTA_DM_SEARCH_IGNORE       BTA_DM_SEARCH_NUM_ACTIONS
+/* state table information */
+#define BTA_DM_SEARCH_ACTIONS              2       /* number of actions */
+#define BTA_DM_SEARCH_NEXT_STATE           2       /* position of next state */
+#define BTA_DM_SEARCH_NUM_COLS             3       /* number of columns in state tables */
+
+
+
+/* state table for listen state */
+const UINT8 bta_dm_search_idle_st_table[][BTA_DM_SEARCH_NUM_COLS] =
+{
+
+/* Event                        Action 1                            Action 2                    Next State */
+/* API_SEARCH */            {BTA_DM_API_SEARCH,                BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* API_SEARCH_CANCEL */     {BTA_DM_SEARCH_CANCEL_NOTIFY,      BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* API_SEARCH_DISC */       {BTA_DM_API_DISCOVER,              BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* INQUIRY_CMPL */          {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* REMT_NAME_EVT */         {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* SDP_RESULT_EVT */        {BTA_DM_FREE_SDP_DB,               BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* SEARCH_CMPL_EVT */       {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* DISCV_RES_EVT */         {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* API_DI_DISCOVER_EVT */   {BTA_DM_API_DI_DISCOVER,           BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE}
+
+};
+const UINT8 bta_dm_search_search_active_st_table[][BTA_DM_SEARCH_NUM_COLS] =
+{
+
+/* Event                        Action 1                            Action 2                    Next State */
+/* API_SEARCH */            {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* API_SEARCH_CANCEL */     {BTA_DM_API_SEARCH_CANCEL,         BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_CANCELLING},
+/* API_SEARCH_DISC */       {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* INQUIRY_CMPL */          {BTA_DM_INQUIRY_CMPL,              BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* REMT_NAME_EVT */         {BTA_DM_REMT_NAME,                 BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* SDP_RESULT_EVT */        {BTA_DM_SDP_RESULT,                BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* SEARCH_CMPL_EVT */       {BTA_DM_SEARCH_CMPL,               BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* DISCV_RES_EVT */         {BTA_DM_SEARCH_RESULT,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE},
+/* API_DI_DISCOVER_EVT */   {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_ACTIVE}
+
+
+};
+
+const UINT8 bta_dm_search_search_cancelling_st_table[][BTA_DM_SEARCH_NUM_COLS] =
+{
+
+/* Event                        Action 1                            Action 2                    Next State */
+/* API_SEARCH */            {BTA_DM_QUEUE_SEARCH,               BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_CANCELLING},
+/* API_SEARCH_CANCEL */     {BTA_DM_SEARCH_CLEAR_QUEUE,         BTA_DM_SEARCH_CANCEL_NOTIFY,   BTA_DM_SEARCH_CANCELLING},
+/* API_SEARCH_DISC */       {BTA_DM_QUEUE_DISC,                 BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_CANCELLING},
+/* INQUIRY_CMPL */          {BTA_DM_SEARCH_CANCEL_CMPL,         BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* REMT_NAME_EVT */         {BTA_DM_SEARCH_CANCEL_TRANSAC_CMPL, BTA_DM_SEARCH_CANCEL_CMPL,     BTA_DM_SEARCH_IDLE},
+/* SDP_RESULT_EVT */        {BTA_DM_SEARCH_CANCEL_TRANSAC_CMPL, BTA_DM_SEARCH_CANCEL_CMPL,     BTA_DM_SEARCH_IDLE},
+/* SEARCH_CMPL_EVT */       {BTA_DM_SEARCH_CANCEL_CMPL,         BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* DISCV_RES_EVT */         {BTA_DM_SEARCH_CANCEL_CMPL,         BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* API_DI_DISCOVER_EVT */   {BTA_DM_SEARCH_IGNORE,              BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_CANCELLING}
+
+
+};
+
+const UINT8 bta_dm_search_disc_active_st_table[][BTA_DM_SEARCH_NUM_COLS] =
+{
+
+/* Event                        Action 1                            Action 2                    Next State */
+/* API_SEARCH */            {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* API_SEARCH_CANCEL */     {BTA_DM_SEARCH_CANCEL_NOTIFY,      BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_CANCELLING},
+/* API_SEARCH_DISC */       {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* INQUIRY_CMPL */          {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* REMT_NAME_EVT */         {BTA_DM_DISC_RMT_NAME,             BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* SDP_RESULT_EVT */        {BTA_DM_SDP_RESULT,                BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* SEARCH_CMPL_EVT */       {BTA_DM_SEARCH_CMPL,               BTA_DM_SEARCH_IGNORE,          BTA_DM_SEARCH_IDLE},
+/* DISCV_RES_EVT */         {BTA_DM_DISC_RESULT,               BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE},
+/* API_DI_DISCOVER_EVT */   {BTA_DM_SEARCH_IGNORE,             BTA_DM_SEARCH_IGNORE,          BTA_DM_DISCOVER_ACTIVE}
+
+};
+
+typedef const UINT8 (*tBTA_DM_ST_TBL)[BTA_DM_SEARCH_NUM_COLS];
+
+/* state table */
+const tBTA_DM_ST_TBL bta_dm_search_st_tbl[] = {
+    bta_dm_search_idle_st_table,
+    bta_dm_search_search_active_st_table,
+    bta_dm_search_search_cancelling_st_table,
+    bta_dm_search_disc_active_st_table
+};
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_sm_disable
+**
+** Description     unregister BTA DM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sm_disable( )
+{
+    bta_sys_deregister( BTA_ID_DM );
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_sm_execute
+**
+** Description      State machine event handling function for DM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_dm_sm_execute(BT_HDR *p_msg)
+{
+    UINT16  event = p_msg->event & 0x00ff;
+
+    APPL_TRACE_EVENT1("bta_dm_sm_execute event:0x%x", event);
+
+    /* execute action functions */
+    if(event < BTA_DM_NUM_ACTIONS)
+    {
+        (*bta_dm_action[event])( (tBTA_DM_MSG*) p_msg);
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sm_search_disable
+**
+** Description     unregister BTA SEARCH DM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_search_sm_disable( )
+{
+    bta_sys_deregister( BTA_ID_DM_SEARCH );
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_search_sm_execute
+**
+** Description      State machine event handling function for DM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_dm_search_sm_execute(BT_HDR *p_msg)
+{
+    tBTA_DM_ST_TBL      state_table;
+    UINT8               action;
+    int                 i;
+
+    APPL_TRACE_EVENT2("bta_dm_search_sm_execute state:%d, event:0x%x",
+        bta_dm_search_cb.state, p_msg->event);
+
+    /* look up the state table for the current state */
+    state_table = bta_dm_search_st_tbl[bta_dm_search_cb.state];
+
+    bta_dm_search_cb.state = state_table[p_msg->event & 0x00ff][BTA_DM_SEARCH_NEXT_STATE];
+
+
+    /* execute action functions */
+    for (i = 0; i < BTA_DM_SEARCH_ACTIONS; i++)
+    {
+        if ((action = state_table[p_msg->event & 0x00ff][i]) != BTA_DM_SEARCH_IGNORE)
+        {
+            (*bta_dm_search_action[action])( (tBTA_DM_MSG*) p_msg);
+        }
+        else
+        {
+            break;
+        }
+    }
+    return TRUE;
+}
+
diff --git a/bta/dm/bta_dm_pm.c b/bta/dm/bta_dm_pm.c
new file mode 100644
index 0000000..8a993de
--- /dev/null
+++ b/bta/dm/bta_dm_pm.c
@@ -0,0 +1,994 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the action functions for device manager state
+ *  machine.
+ *
+ ******************************************************************************/
+
+#include "gki.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_dm_int.h"
+#include "btm_api.h"
+
+#include <string.h>
+
+
+static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+static void bta_dm_pm_set_mode(BD_ADDR peer_addr, BOOLEAN timed_out );
+static void bta_dm_pm_timer_cback(void *p_tle);
+static void bta_dm_pm_btm_cback(BD_ADDR bd_addr, tBTM_PM_STATUS status, UINT16 value, UINT8 hci_status);
+static BOOLEAN bta_dm_pm_park(BD_ADDR peer_addr);
+static BOOLEAN bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE *p_peer_dev, UINT8 index);
+static BOOLEAN bta_dm_pm_is_sco_active ();
+static void bta_dm_pm_hid_check(BOOLEAN bScoActive);
+static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE *p_dev, BOOLEAN bDisable);
+#if (BTM_SSR_INCLUDED == TRUE)
+static void bta_dm_pm_ssr(BD_ADDR peer_addr);
+static void bta_dm_ssr_cfg_cback(UINT8 id, UINT8 app_id, UINT16 max_lat, UINT16 min_rmt_to);
+#endif
+
+tBTA_DM_CONNECTED_SRVCS bta_dm_conn_srvcs;
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_init_pm
+**
+** Description      Initialises the BT low power manager
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_init_pm(void)
+{
+
+    memset(&bta_dm_conn_srvcs, 0x00, sizeof(bta_dm_conn_srvcs));
+
+    /* if there are no power manger entries, so not register */
+    if(p_bta_dm_pm_cfg[0].app_id != 0)
+    {
+        bta_sys_pm_register((tBTA_SYS_CONN_CBACK*)bta_dm_pm_cback);
+
+#if (BTM_SSR_INCLUDED == TRUE)
+        bta_sys_ssr_cfg_register((tBTA_SYS_SSR_CFG_CBACK*)bta_dm_ssr_cfg_cback);
+#endif
+        BTM_PmRegister((BTM_PM_REG_SET | BTM_PM_REG_NOTIF), &bta_dm_cb.pm_id,
+                       bta_dm_pm_btm_cback);
+    }
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_disable_pm
+**
+** Description      Disable PM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_disable_pm(void)
+{
+    UINT8 i;
+
+    bta_sys_pm_register(NULL);
+    BTM_PmRegister( BTM_PM_DEREG, &bta_dm_cb.pm_id, NULL);
+
+    /* Need to stop all active timers. */
+    for(i=0; i<BTA_DM_NUM_PM_TIMER; i++)
+    {
+        if(bta_dm_cb.pm_timer[i].in_use)
+        {
+            APPL_TRACE_DEBUG1("stop dm_pm_timer:%d", i);
+            bta_sys_stop_timer(&bta_dm_cb.pm_timer[i].timer);
+            bta_dm_cb.pm_timer[i].in_use = FALSE;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_stop_timer
+**
+** Description      stop a PM timer
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pm_stop_timer(BD_ADDR peer_addr)
+{
+    UINT8 i;
+
+    for(i=0; i<BTA_DM_NUM_PM_TIMER; i++)
+    {
+
+        if(bta_dm_cb.pm_timer[i].in_use && !bdcmp(bta_dm_cb.pm_timer[i].peer_bdaddr, peer_addr))
+        {
+            APPL_TRACE_DEBUG1("stop dm_pm_timer:%d", i);
+            bta_sys_stop_timer(&bta_dm_cb.pm_timer[i].timer);
+            bta_dm_cb.pm_timer[i].in_use = FALSE;
+            break;
+        }
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_cback
+**
+** Description      Conn change callback from sys for low power management
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pm_cback(tBTA_SYS_CONN_STATUS status, UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+
+    UINT8 i,j;
+    UINT16 policy_setting;
+    tBTM_STATUS btm_status;
+    tBTM_VERSION_INFO vers;
+#if (BTM_SSR_INCLUDED == TRUE)
+    int               index = BTA_DM_PM_SSR0;
+#endif
+    tBTA_DM_PEER_DEVICE *p_dev;
+
+    APPL_TRACE_DEBUG3("bta_dm_pm_cback: st(%d), id(%d), app(%d)", status, id, app_id);
+
+    btm_status = BTM_ReadLocalVersion (&vers);
+    p_dev = bta_dm_find_peer_device(peer_addr);
+
+	/* Disable/Enable sniff policy on the SCO link if sco Up/Down. Will be removed in 2.2*/
+    if ((btm_status == BTM_SUCCESS) &&
+        (vers.manufacturer == LMP_COMPID_BROADCOM) &&
+        (vers.hci_version < HCI_PROTO_VERSION_2_0) &&
+        ((status == BTA_SYS_SCO_OPEN) || (status == BTA_SYS_SCO_CLOSE)) )
+        {
+        bta_dm_pm_set_sniff_policy(p_dev, (status == BTA_SYS_SCO_OPEN));
+    }
+
+    /* find if there is an power mode entry for the service */
+    for(i=1; i<=p_bta_dm_pm_cfg[0].app_id; i++)
+    {
+
+        if((p_bta_dm_pm_cfg[i].id == id)
+            && ((p_bta_dm_pm_cfg[i].app_id == BTA_ALL_APP_ID ) || (p_bta_dm_pm_cfg[i].app_id == app_id )))
+            break;
+
+    }
+
+    /* if no entries are there for the app_id and subystem in p_bta_dm_pm_spec*/
+    if(i> p_bta_dm_pm_cfg[0].app_id)
+        return;
+
+    bta_dm_pm_stop_timer(peer_addr);
+    /*p_dev = bta_dm_find_peer_device(peer_addr);*/
+
+#if (BTM_SSR_INCLUDED == TRUE)
+    /* set SSR parameters on SYS CONN OPEN */
+    if((BTA_SYS_CONN_OPEN == status) && p_dev && (p_dev->info & BTA_DM_DI_USE_SSR))
+    {
+        index = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].ssr;
+    }
+#endif
+
+    /* if no action for the event */
+    if(p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].actn_tbl[status][0].power_mode == BTA_DM_PM_NO_ACTION)
+    {
+#if (BTM_SSR_INCLUDED == TRUE)
+        if(BTA_DM_PM_SSR0 == index) /* and do not need to set SSR, return. */
+#endif
+        return;
+    }
+
+    for(j=0; j<bta_dm_conn_srvcs.count ; j++)
+    {
+        /* check if an entry already present */
+        if((bta_dm_conn_srvcs.conn_srvc[j].id == id)
+            && (bta_dm_conn_srvcs.conn_srvc[j].app_id == app_id )
+            && !bdcmp(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, peer_addr))
+            break;
+
+    }
+
+        /* if subsystem has no more preference on the power mode remove
+       the cb */
+    if(p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].actn_tbl[status][0].power_mode == BTA_DM_PM_NO_PREF)
+    {
+
+        if(j != bta_dm_conn_srvcs.count)
+        {
+            bta_dm_conn_srvcs.count--;
+
+            for(; j<bta_dm_conn_srvcs.count ; j++)
+            {
+
+                memcpy(&bta_dm_conn_srvcs.conn_srvc[j], &bta_dm_conn_srvcs.conn_srvc[j+1], sizeof(bta_dm_conn_srvcs.conn_srvc[j]));
+
+            }
+        }
+        else
+        {
+            APPL_TRACE_WARNING0("bta_dm_act no entry for connected service cbs");
+            return;
+        }
+    }
+    else if(j == bta_dm_conn_srvcs.count )
+    {
+        /* check if we have more connected service that cbs */
+        if(bta_dm_conn_srvcs.count == BTA_DM_NUM_CONN_SRVS)
+        {
+            APPL_TRACE_WARNING0("bta_dm_act no more connected service cbs");
+            return;
+        }
+
+        /* fill in a new cb */
+        bta_dm_conn_srvcs.conn_srvc[j].id = id;
+        bta_dm_conn_srvcs.conn_srvc[j].app_id = app_id;
+        bdcpy(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, peer_addr);
+
+        APPL_TRACE_WARNING2("new conn_srvc id:%d, app_id:%d", id, app_id);
+
+        bta_dm_conn_srvcs.count++;
+        bta_dm_conn_srvcs.conn_srvc[j].state = status;
+    }
+    else
+    {
+        /* no service is added or removed. only updating status. */
+        bta_dm_conn_srvcs.conn_srvc[j].state = status;
+    }
+
+    if(p_dev)
+    {
+        p_dev->pm_mode_attempted = 0;
+        p_dev->pm_mode_failed = 0;
+    }
+
+#if (BTM_SSR_INCLUDED == TRUE)
+    if(p_bta_dm_ssr_spec[index].max_lat)
+    {
+        bta_dm_pm_ssr(peer_addr);
+    }
+#endif
+
+    bta_dm_pm_set_mode(peer_addr, FALSE);
+
+    /* perform the HID link workaround if needed
+    ** 1. If SCO up/down event is received OR
+    ** 2. If HID connection open is received and SCO is already active.
+    **     This will handle the case where HID connects when SCO already active
+    */
+    if ( (btm_status == BTM_SUCCESS) &&
+         ( ((status == BTA_SYS_SCO_OPEN) || (status == BTA_SYS_SCO_CLOSE)) ||
+           ((status == BTA_SYS_CONN_OPEN) && (id == BTA_ID_HH) && bta_dm_pm_is_sco_active()) ) )
+    {
+        BOOLEAN bScoActive;
+        if (status == BTA_SYS_CONN_OPEN)
+            bScoActive = TRUE;
+        else
+            bScoActive = (status == BTA_SYS_SCO_OPEN);
+
+        bta_dm_pm_hid_check(bScoActive);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_set_mode
+**
+** Description      Set the power mode for the device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pm_set_mode(BD_ADDR peer_addr, BOOLEAN timed_out )
+{
+
+    tBTA_DM_PM_ACTTION  pm_action = BTA_DM_PM_NO_ACTION;
+    UINT16              timeout = 0;
+    UINT8               i,j;
+    tBTA_DM_PM_ACTTION  failed_pm = 0;
+    tBTA_DM_PEER_DEVICE *p_peer_device = NULL;
+    tBTA_DM_PM_ACTTION   allowed_modes = 0;
+    tBTA_DM_PM_ACTTION   pref_modes = 0;
+    tBTA_DM_PM_CFG      *p_pm_cfg;
+    tBTA_DM_PM_SPEC     *p_pm_spec;
+    tBTA_DM_PM_ACTN     *p_act0, *p_act1;
+    tBTA_DM_SRVCS       *p_srvcs;
+
+
+    if(!bta_dm_cb.device_list.count)
+        return;
+
+    /* see if any attempt to put device in low power mode failed */
+    p_peer_device = bta_dm_find_peer_device(peer_addr);
+    /* if no peer device found return */
+    if (p_peer_device == NULL)
+        return;
+
+    failed_pm = p_peer_device->pm_mode_failed;
+
+    for(i=0; i<bta_dm_conn_srvcs.count ; i++)
+    {
+
+        p_srvcs = &bta_dm_conn_srvcs.conn_srvc[i];
+        if(!bdcmp(p_srvcs->peer_bdaddr, peer_addr))
+        {
+
+            /* p_bta_dm_pm_cfg[0].app_id is the number of entries */
+            for(j=1; j<=p_bta_dm_pm_cfg[0].app_id; j++)
+            {
+                if((p_bta_dm_pm_cfg[j].id == p_srvcs->id)
+                    && ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID ) ||
+                    (p_bta_dm_pm_cfg[j].app_id == p_srvcs->app_id)))
+                    break;
+            }
+
+            p_pm_cfg = &p_bta_dm_pm_cfg[j];
+            p_pm_spec = &p_bta_dm_pm_spec[p_pm_cfg->spec_idx];
+            p_act0 = &p_pm_spec->actn_tbl[p_srvcs->state][0];
+            p_act1 = &p_pm_spec->actn_tbl[p_srvcs->state][1];
+
+            APPL_TRACE_DEBUG3("bta_dm_pm_set_mode: srvcsid: %d, state: %d, j: %d", p_srvcs->id, p_srvcs->state, j);
+            allowed_modes |= p_pm_spec->allow_mask;
+
+            /* PM actions are in the order of strictness */
+
+            /* first check if the first preference is ok */
+            if(!(failed_pm & p_act0->power_mode))
+            {
+                pref_modes |= p_act0->power_mode;
+
+                if(p_act0->power_mode > pm_action)
+                {
+                    pm_action = p_act0->power_mode;
+                    timeout =  p_act0->timeout;
+
+                }
+            }
+            /* if first preference has already failed, try second preference */
+            else if(!(failed_pm & p_act1->power_mode))
+            {
+                pref_modes |= p_act1->power_mode;
+
+                if(p_act1->power_mode > pm_action)
+                {
+                    pm_action = p_act1->power_mode;
+                    timeout =  p_act1->timeout;
+
+                }
+            }
+        }
+    }
+
+    if(pm_action & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF))
+    {
+
+        /* some service don't like the mode */
+        if(!(allowed_modes & pm_action))
+        {
+
+            /* select the other mode if its allowed and preferred, otherwise 0 which is BTA_DM_PM_NO_ACTION */
+            pm_action =  (allowed_modes & (BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & pref_modes);
+
+            /* no timeout needed if no action is required */
+            if(pm_action == BTA_DM_PM_NO_ACTION)
+            {
+                timeout = 0;
+            }
+
+        }
+
+
+    }
+
+    if(!timed_out && timeout)
+    {
+
+        for(i=0; i<BTA_DM_NUM_PM_TIMER; i++)
+        {
+
+            if(!bta_dm_cb.pm_timer[i].in_use)
+            {
+                bta_dm_cb.pm_timer[i].in_use = TRUE;
+                bdcpy(bta_dm_cb.pm_timer[i].peer_bdaddr, peer_addr);
+                bta_dm_cb.pm_timer[i].timer.p_cback = bta_dm_pm_timer_cback;
+                bta_sys_start_timer(&bta_dm_cb.pm_timer[i].timer, 0, timeout);
+                APPL_TRACE_DEBUG2("start dm_pm_timer:%d, %d", i, timeout);
+                return;
+
+            }
+
+        }
+
+        /* no more timers */
+        if(i==BTA_DM_NUM_PM_TIMER)
+        {
+            APPL_TRACE_WARNING0("bta_dm_act dm_pm_timer no more");
+            return;
+        }
+    }
+
+    if(pm_action == BTA_DM_PM_NO_ACTION)
+    {
+
+
+    }
+    else if(pm_action == BTA_DM_PM_PARK)
+    {
+        p_peer_device->pm_mode_attempted = BTA_DM_PM_PARK;
+        bta_dm_pm_park(peer_addr);
+
+    }
+    else if(pm_action & BTA_DM_PM_SNIFF)
+    {
+        /* dont initiate SNIFF, if link_policy has it disabled */
+        if (p_peer_device->link_policy & HCI_ENABLE_SNIFF_MODE)
+        {
+	        p_peer_device->pm_mode_attempted = BTA_DM_PM_SNIFF;
+    	    bta_dm_pm_sniff(p_peer_device, (UINT8)(pm_action & 0x0F) );
+        }
+        else
+        {
+            APPL_TRACE_DEBUG0("bta_dm_pm_set_mode: Link policy disallows SNIFF, ignore request");
+        }
+    }
+    else if(pm_action == BTA_DM_PM_ACTIVE)
+    {
+
+        bta_dm_pm_active(peer_addr);
+
+    }
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_pm_park
+**
+** Description      Switch to park mode.
+**
+**
+** Returns          TRUE if park attempted, FALSE otherwise.
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_pm_park(BD_ADDR peer_addr)
+{
+
+    tBTM_PM_MODE    mode = BTM_PM_STS_ACTIVE;
+
+    /* if not in park mode, switch to park */
+    BTM_ReadPowerMode(peer_addr, &mode);
+
+    if(mode != BTM_PM_MD_PARK)
+    {
+        BTM_SetPowerMode (bta_dm_cb.pm_id, peer_addr, &p_bta_dm_pm_md[BTA_DM_PM_PARK_IDX]);
+    }
+    return TRUE;
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_pm_sniff
+**
+** Description      Switch to sniff mode.
+**
+**
+** Returns          TRUE if sniff attempted, FALSE otherwise.
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_pm_sniff(tBTA_DM_PEER_DEVICE *p_peer_dev, UINT8 index)
+{
+    tBTM_PM_MODE    mode = BTM_PM_STS_ACTIVE;
+    tBTM_PM_PWR_MD  pwr_md;
+    tBTM_STATUS     status;
+
+    BTM_ReadPowerMode(p_peer_dev->peer_bdaddr, &mode);
+
+#if (BTM_SSR_INCLUDED == TRUE)
+    APPL_TRACE_DEBUG3("bta_dm_pm_sniff cur:%d, idx:%d, info:x%x", mode, index, p_peer_dev->info);
+    if (mode != BTM_PM_MD_SNIFF ||
+        (HCI_SNIFF_SUB_RATE_SUPPORTED(BTM_ReadLocalFeatures ()) &&
+         HCI_SNIFF_SUB_RATE_SUPPORTED(BTM_ReadRemoteFeatures (p_peer_dev->peer_bdaddr)) &&
+         !(p_peer_dev->info & BTA_DM_DI_USE_SSR)))
+#else
+    APPL_TRACE_DEBUG2("bta_dm_pm_sniff cur:%d, idx:%d", mode, index);
+    if(mode != BTM_PM_MD_SNIFF)
+#endif
+    {
+        /* if the current mode is not sniff, issue the sniff command.
+         * If sniff, but SSR is not used in this link, still issue the command */
+        memcpy(&pwr_md, &p_bta_dm_pm_md[index], sizeof (tBTM_PM_PWR_MD));
+        if (p_peer_dev->info & BTA_DM_DI_INT_SNIFF)
+        {
+            pwr_md.mode |= BTM_PM_MD_FORCE;
+        }
+        status = BTM_SetPowerMode (bta_dm_cb.pm_id, p_peer_dev->peer_bdaddr, &pwr_md);
+        if (status == BTM_CMD_STORED|| status == BTM_CMD_STARTED)
+        {
+            p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF);
+            p_peer_dev->info |= BTA_DM_DI_SET_SNIFF;
+        }
+        else if (status == BTM_SUCCESS)
+        {
+            APPL_TRACE_DEBUG0("bta_dm_pm_sniff BTM_SetPowerMode() returns BTM_SUCCESS");
+            p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF);
+        }
+        else /* error */
+        {
+            APPL_TRACE_ERROR1("bta_dm_pm_sniff BTM_SetPowerMode() returns ERROR status=%d", status);
+            p_peer_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF);
+        }
+    }
+    /* else already in sniff and is using SSR, do nothing */
+
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_ssr
+**
+** Description      checks and sends SSR parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_SSR_INCLUDED == TRUE)
+static void bta_dm_pm_ssr(BD_ADDR peer_addr)
+{
+    tBTA_DM_SSR_SPEC *p_spec, *p_spec_cur;
+    UINT8   i,j;
+    int     ssr = BTA_DM_PM_SSR0;
+
+    /* go through the connected services */
+    for(i=0; i<bta_dm_conn_srvcs.count ; i++)
+    {
+        if(!bdcmp(bta_dm_conn_srvcs.conn_srvc[i].peer_bdaddr, peer_addr))
+        {
+            /* p_bta_dm_pm_cfg[0].app_id is the number of entries */
+            for(j=1; j<=p_bta_dm_pm_cfg[0].app_id; j++)
+            {
+                /* find the associated p_bta_dm_pm_cfg */
+                if((p_bta_dm_pm_cfg[j].id == bta_dm_conn_srvcs.conn_srvc[i].id)
+                    && ((p_bta_dm_pm_cfg[j].app_id == BTA_ALL_APP_ID )
+                    || (p_bta_dm_pm_cfg[j].app_id == bta_dm_conn_srvcs.conn_srvc[i].app_id)))
+                {
+                    APPL_TRACE_WARNING2("bta_dm_pm_ssr conn_srvc id:%d, app_id:%d",
+                        bta_dm_conn_srvcs.conn_srvc[i].id, bta_dm_conn_srvcs.conn_srvc[i].app_id);
+                    break;
+                }
+            }
+
+            /* find the ssr index with the smallest max latency. */
+            p_spec_cur = &p_bta_dm_ssr_spec[p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr];
+            p_spec = &p_bta_dm_ssr_spec[ssr];
+
+            if (p_spec_cur->max_lat < p_spec->max_lat ||
+                (ssr == BTA_DM_PM_SSR0 && p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr != BTA_DM_PM_SSR0))
+            {
+                ssr = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[j].spec_idx].ssr;
+            }
+
+        }
+    }
+
+    p_spec = &p_bta_dm_ssr_spec[ssr];
+    APPL_TRACE_WARNING2("bta_dm_pm_ssr:%d, lat:%d", ssr, p_spec->max_lat);
+    if(p_spec->max_lat)
+    {
+        /* set the SSR parameters. */
+        BTM_SetSsrParams (peer_addr, p_spec->max_lat,
+            p_spec->min_rmt_to, p_spec->min_loc_to);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_dm_ssr_cfg_cback
+**
+** Description      Conn change callback from sys for low power management
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_ssr_cfg_cback(UINT8 id, UINT8 app_id,
+                                 UINT16 max_lat, UINT16 min_rmt_to)
+{
+    tBTA_DM_SSR_SPEC *p_spec;
+    UINT8   i, index;
+    /* find if there is an power mode entry for the service */
+    for(i=1; i<=p_bta_dm_pm_cfg[0].app_id; i++)
+    {
+
+        if((p_bta_dm_pm_cfg[i].id == id)
+            && ((p_bta_dm_pm_cfg[i].app_id == BTA_ALL_APP_ID ) || (p_bta_dm_pm_cfg[i].app_id == app_id )))
+            break;
+
+    }
+    /* if no entries are there for the app_id and subystem in p_bta_dm_pm_spec*/
+    if(i> p_bta_dm_pm_cfg[0].app_id)
+        return;
+
+    index = p_bta_dm_pm_spec[p_bta_dm_pm_cfg[i].spec_idx].ssr;
+
+    APPL_TRACE_DEBUG2("SSR parameter changed to: max_latency: %d min_tout: %d", max_lat, min_rmt_to);
+
+    p_spec = &p_bta_dm_ssr_spec[index];
+    p_spec->max_lat = max_lat;
+    p_spec->min_rmt_to = min_rmt_to;
+}
+
+
+#endif
+/*******************************************************************************
+**
+** Function         bta_dm_pm_active
+**
+** Description      Brings connection to active mode
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_pm_active(BD_ADDR peer_addr)
+{
+    tBTM_PM_PWR_MD  pm;
+
+    memset( (void*)&pm, 0, sizeof(pm));
+
+    /* switch to active mode */
+    pm.mode = BTM_PM_MD_ACTIVE;
+    BTM_SetPowerMode (bta_dm_cb.pm_id, peer_addr, &pm);
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_btm_cback
+**
+** Description      BTM power manager callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pm_btm_cback(BD_ADDR bd_addr, tBTM_PM_STATUS status, UINT16 value, UINT8 hci_status)
+{
+   tBTA_DM_PM_BTM_STATUS  *p_buf;
+
+   if ((p_buf = (tBTA_DM_PM_BTM_STATUS *) GKI_getbuf(sizeof(tBTA_DM_PM_BTM_STATUS))) != NULL)
+    {
+        p_buf->hdr.event = BTA_DM_PM_BTM_STATUS_EVT;
+        p_buf->status = status;
+        p_buf->value = value;
+        p_buf->hci_status = hci_status;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_timer_cback
+**
+** Description      Power management timer callback.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_dm_pm_timer_cback(void *p_tle)
+{
+    tBTA_DM_PM_TIMER  *p_buf;
+    UINT8 i;
+
+    APPL_TRACE_WARNING0("dm_pm_timer expires");
+
+    for(i=0; i<BTA_DM_NUM_PM_TIMER; i++)
+    {
+
+        if(bta_dm_cb.pm_timer[i].in_use)
+        {
+
+            if(&bta_dm_cb.pm_timer[i].timer == (TIMER_LIST_ENT*) p_tle)
+            {
+                APPL_TRACE_WARNING1("dm_pm_timer expires %d", i);
+                bta_dm_cb.pm_timer[i].in_use = FALSE;
+                break;
+            }
+
+        }
+
+    }
+
+
+    /* no more timers */
+    if(i==BTA_DM_NUM_PM_TIMER)
+    {
+        return;
+    }
+
+    if ((p_buf = (tBTA_DM_PM_TIMER *) GKI_getbuf(sizeof(tBTA_DM_PM_TIMER))) != NULL)
+    {
+        p_buf->hdr.event = BTA_DM_PM_TIMER_EVT;
+        bdcpy(p_buf->bd_addr, bta_dm_cb.pm_timer[i].peer_bdaddr);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_btm_status
+**
+** Description      Process pm status event from btm
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_pm_btm_status(tBTA_DM_MSG *p_data)
+{
+
+    tBTA_DM_PEER_DEVICE *p_dev;
+    tBTA_DM_DEV_INFO    info;
+
+    APPL_TRACE_DEBUG1("bta_dm_pm_btm_status:%d", p_data->pm_status.status);
+    p_dev = bta_dm_find_peer_device(p_data->pm_status.bd_addr);
+    if(NULL == p_dev)
+        return;
+
+    info = p_dev->info;
+    /* check new mode */
+    switch (p_data->pm_status.status)
+    {
+        case BTM_PM_STS_ACTIVE:
+            /* if our sniff or park attempt failed
+            we should not try it again*/
+            if (p_data->pm_status.hci_status != 0)
+            {
+                APPL_TRACE_ERROR1("bta_dm_pm_btm_status  hci_status=%d", p_data->pm_status.hci_status);
+                p_dev->info &= ~(BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF|BTA_DM_DI_SET_SNIFF);
+
+                if(p_dev->pm_mode_attempted &(BTA_DM_PM_PARK | BTA_DM_PM_SNIFF))
+                {
+                    p_dev->pm_mode_failed
+                        |= ((BTA_DM_PM_PARK | BTA_DM_PM_SNIFF) & p_dev->pm_mode_attempted);
+                    bta_dm_pm_stop_timer(p_data->pm_status.bd_addr);
+                    bta_dm_pm_set_mode(p_data->pm_status.bd_addr, FALSE);
+                }
+            }
+            else
+            {
+#if (BTM_SSR_INCLUDED == TRUE)
+                if(p_dev->prev_low)
+                {
+                    /* need to send the SSR paramaters to controller again */
+                    bta_dm_pm_ssr(p_dev->peer_bdaddr);
+                }
+                p_dev->prev_low = BTM_PM_STS_ACTIVE;
+#endif
+                bta_dm_pm_stop_timer(p_data->pm_status.bd_addr);
+                bta_dm_pm_set_mode(p_data->pm_status.bd_addr, FALSE);
+            }
+            break;
+
+#if (BTM_SSR_INCLUDED == TRUE)
+        case BTM_PM_STS_PARK:
+        case BTM_PM_STS_HOLD:
+            /* save the previous low power mode - for SSR.
+             * SSR parameters are sent to controller on "conn open".
+             * the numbers stay good until park/hold/detach */
+            if(p_dev->info & BTA_DM_DI_USE_SSR)
+                p_dev->prev_low = p_data->pm_status.status;
+            break;
+
+        case BTM_PM_STS_SSR:
+            if(p_data->pm_status.value)
+                p_dev->info |= BTA_DM_DI_USE_SSR;
+            else
+                p_dev->info &= ~BTA_DM_DI_USE_SSR;
+            break;
+#endif
+        case BTM_PM_STS_SNIFF:
+            p_dev->info &= ~(BTA_DM_DI_SET_SNIFF|BTA_DM_DI_INT_SNIFF|BTA_DM_DI_ACP_SNIFF);
+            if (info & BTA_DM_DI_SET_SNIFF)
+                p_dev->info |= BTA_DM_DI_INT_SNIFF;
+            else
+                p_dev->info |= BTA_DM_DI_ACP_SNIFF;
+            break;
+
+        case BTM_PM_STS_ERROR:
+            p_dev->info &= ~BTA_DM_DI_SET_SNIFF;
+            break;
+
+        default:
+            break;
+    }
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_timer
+**
+** Description      Process pm timer event from btm
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_pm_timer(tBTA_DM_MSG *p_data)
+{
+
+    APPL_TRACE_WARNING0("proc dm_pm_timer expires");
+    bta_dm_pm_set_mode(p_data->pm_status.bd_addr, TRUE);
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_find_peer_device
+**
+** Description      Given an address, find the associated control block.
+**
+** Returns          tBTA_DM_PEER_DEVICE
+**
+*******************************************************************************/
+tBTA_DM_PEER_DEVICE * bta_dm_find_peer_device(BD_ADDR peer_addr)
+{
+    tBTA_DM_PEER_DEVICE *p_dev = NULL;
+    int i;
+
+    for(i=0; i<bta_dm_cb.device_list.count; i++)
+    {
+        if(!bdcmp( bta_dm_cb.device_list.peer_device[i].peer_bdaddr, peer_addr))
+        {
+            p_dev = &bta_dm_cb.device_list.peer_device[i];
+            break;
+        }
+
+    }
+    return p_dev;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_is_sco_active
+**
+** Description      Loop through connected services for HFP+State=SCO
+**
+** Returns          BOOLEAN. TRUE if SCO active, else FALSE
+**
+*******************************************************************************/
+static BOOLEAN bta_dm_pm_is_sco_active ()
+{
+    int j;
+    BOOLEAN bScoActive = FALSE;
+
+    for(j=0; j<bta_dm_conn_srvcs.count ; j++)
+    {
+        /* check if an entry already present */
+        if ( (bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_AG )  && (bta_dm_conn_srvcs.conn_srvc[j].state == BTA_SYS_SCO_OPEN) )
+        {
+            bScoActive = TRUE;
+            break;
+        }
+    }
+
+    APPL_TRACE_DEBUG1("bta_dm_is_sco_active: SCO active: %d", bScoActive);
+    return bScoActive;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_hid_check
+**
+** Description      Disables/Enables sniff in link policy based on SCO Up/Down
+**
+** Returns          None
+**
+*******************************************************************************/
+
+static void bta_dm_pm_hid_check(BOOLEAN bScoActive)
+{
+    int j;
+
+    /* if HID is active, disable the link policy */
+    for(j=0; j<bta_dm_conn_srvcs.count ; j++)
+    {
+        /* check if an entry already present */
+        if(bta_dm_conn_srvcs.conn_srvc[j].id == BTA_ID_HH )
+        {
+            APPL_TRACE_DEBUG2 ("SCO status change(Active: %d), modify HID link policy. state: %d",
+                bScoActive, bta_dm_conn_srvcs.conn_srvc[j].state);
+            bta_dm_pm_set_sniff_policy( bta_dm_find_peer_device(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr), bScoActive);
+
+            /* if we had disabled link policy, seems like the hid device stop retrying SNIFF after a few tries. force sniff if needed */
+            if (!bScoActive)
+                bta_dm_pm_set_mode(bta_dm_conn_srvcs.conn_srvc[j].peer_bdaddr, FALSE);
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_pm_set_sniff_policy
+**
+** Description      Disables/Enables sniff in link policy for the give device
+**
+** Returns          None
+**
+*******************************************************************************/
+static void bta_dm_pm_set_sniff_policy(tBTA_DM_PEER_DEVICE *p_dev, BOOLEAN bDisable)
+{
+    UINT16 policy_setting;
+
+    if (!p_dev)
+        return;
+
+    if (bDisable)
+    {
+        policy_setting = bta_dm_cb.cur_policy &
+            (HCI_ENABLE_MASTER_SLAVE_SWITCH |
+             HCI_ENABLE_HOLD_MODE  |
+             HCI_ENABLE_PARK_MODE);
+
+    }
+    else
+    {
+        /*  allow sniff after sco is closed */
+         policy_setting= bta_dm_cb.cur_policy;
+    }
+
+    /* if disabling SNIFF, make sure link is Active */
+    if (bDisable)
+        bta_dm_pm_active(p_dev->peer_bdaddr);
+
+    /* update device record and set link policy */
+    p_dev->link_policy = policy_setting;
+    BTM_SetLinkPolicy(p_dev->peer_bdaddr, &policy_setting);
+
+}
diff --git a/bta/dm/bta_dm_sco.c b/bta/dm/bta_dm_sco.c
new file mode 100644
index 0000000..803242b
--- /dev/null
+++ b/bta/dm/bta_dm_sco.c
@@ -0,0 +1,695 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the down sampling utility to convert PCM samples in
+ *  16k/32k/48k/44.1k/22050/11025 sampling rate into 8K/16bits samples
+ *  required for SCO channel format. One API function isprovided and only
+ *  possible to be used when transmitting SCO data is sent via HCI
+ *  interface.
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "bta_api.h"
+#include "bta_sys.h"
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE)
+
+#ifndef BTA_DM_SCO_DEBUG
+#define BTA_DM_SCO_DEBUG    FALSE
+#endif
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+#define BTA_DM_PCM_OVERLAP_SIZE			     48
+
+#define BTA_DM_PCM_SMPL_RATE_44100     44100
+#define BTA_DM_PCM_SMPL_RATE_22050     22050
+#define BTA_DM_PCM_SMPL_RATE_11025     11025
+
+/*****************************************************************************
+**  Data types for PCM Resampling utility
+*****************************************************************************/
+
+typedef INT32   (*PCONVERT_TO_BT_FILTERED)  (UINT8 *pSrc, void *pDst, UINT32 dwSrcSamples,
+                             UINT32 dwSrcSps,INT32 *pLastCurPos, UINT8 *pOverlapArea);
+typedef INT32   (*PCONVERT_TO_BT_NOFILTER)  (void *pSrc, void *pDst, UINT32 dwSrcSamples,
+                                             UINT32 dwSrcSps);
+typedef struct
+{
+    UINT8               overlap_area[BTA_DM_PCM_OVERLAP_SIZE * 4];
+    UINT32              cur_pos;    /* current position */
+    UINT32              src_sps;    /* samples per second (source audio data) */
+    PCONVERT_TO_BT_FILTERED     filter;    /* the action function to do the
+                                    conversion 44100, 22050, 11025*/
+    PCONVERT_TO_BT_NOFILTER     nofilter;    /* the action function to do
+                                        the conversion 48000, 32000, 16000*/
+    UINT32              bits;       /* number of bits per pcm sample */
+    UINT32              n_channels; /* number of channels (i.e. mono(1), stereo(2)...) */
+    UINT32              sample_size;
+    UINT32              can_be_filtered;
+    UINT32	            divisor;
+} tBTA_DM_PCM_RESAMPLE_CB;
+
+tBTA_DM_PCM_RESAMPLE_CB bta_dm_pcm_cb;
+
+/*****************************************************************************
+**  Macro Definition
+*****************************************************************************/
+
+
+#define CHECK_SATURATION16(x)                                           \
+            if (x > 32767)                                              \
+                x = 32767;                                              \
+            else if (x < -32768)                                        \
+                x = -32768;
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#define CONVERT_44100_TO_BLUETOOTH(pStart, pEnd)                            \
+    {                                                                       \
+        INT32         out1, out2, out3, out4, out5;                         \
+        SRC_TYPE    *pS = (SRC_TYPE *)pStart;                               \
+        SRC_TYPE    *pSEnd = (SRC_TYPE *)pEnd;                              \
+                                                                            \
+        while (pS < pSEnd)                                                  \
+        {                                                                   \
+            CurrentPos -= 8000;                                             \
+                                                                            \
+            if (CurrentPos >= 0)                                            \
+            {                                                               \
+                pS += SRC_CHANNELS;                                         \
+                continue;                                                   \
+            }                                                               \
+            CurrentPos += dwSrcSps;                                         \
+                                                                            \
+            out1 = (SRC_SAMPLE(0) * 1587)                                   \
+                 + ((SRC_SAMPLE(1) + SRC_SAMPLE(-1)) * 1522)                \
+                 + ((SRC_SAMPLE(2) + SRC_SAMPLE(-2)) * 1337)                \
+                 + ((SRC_SAMPLE(3) + SRC_SAMPLE(-3)) * 1058);               \
+                                                                            \
+            out1 = out1 / 30000;                                            \
+                                                                            \
+            out2 = ((SRC_SAMPLE(4) + SRC_SAMPLE(-4)) * 725)                 \
+                 + ((SRC_SAMPLE(5) + SRC_SAMPLE(-5)) * 384)                 \
+                 + ((SRC_SAMPLE(6) + SRC_SAMPLE(-6)) * 79);                 \
+                                                                            \
+            out2 = out2 / 30000;                                            \
+                                                                            \
+            out3 = ((SRC_SAMPLE(7) + SRC_SAMPLE(-7)) * 156)                 \
+                 + ((SRC_SAMPLE(8) + SRC_SAMPLE(-8)) * 298)                 \
+                 + ((SRC_SAMPLE(9) + SRC_SAMPLE(-9)) * 345);                \
+                                                                            \
+            out3 = out3 / 30000;                                            \
+                                                                            \
+            out4 = ((SRC_SAMPLE(10) + SRC_SAMPLE(-10)) * 306)               \
+                 + ((SRC_SAMPLE(11) + SRC_SAMPLE(-11)) * 207)               \
+                 + ((SRC_SAMPLE(12) + SRC_SAMPLE(-12)) * 78);               \
+                                                                            \
+            out4 = out4 / 30000;                                            \
+                                                                            \
+            out5 = out1 + out2 - out3 - out4;                               \
+                                                                            \
+            CHECK_SATURATION16(out5);                                       \
+            *psBtOut++ = (INT16)out5;                                       \
+                                                                            \
+            pS += SRC_CHANNELS;                                             \
+        }                                                                   \
+    }
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#define CONVERT_22050_TO_BLUETOOTH(pStart, pEnd)                            \
+    {                                                                       \
+        INT32         out1, out2, out3, out4, out5;                         \
+        SRC_TYPE    *pS = (SRC_TYPE *)pStart;                               \
+        SRC_TYPE    *pSEnd = (SRC_TYPE *)pEnd;                              \
+                                                                            \
+        while (pS < pSEnd)                                                  \
+        {                                                                   \
+            CurrentPos -= 8000;                                             \
+                                                                            \
+            if (CurrentPos >= 0)                                            \
+            {                                                               \
+                pS += SRC_CHANNELS;                                         \
+                continue;                                                   \
+            }                                                               \
+            CurrentPos += dwSrcSps;                                         \
+                                                                            \
+            out1 = (SRC_SAMPLE(0) * 2993)                                   \
+                 + ((SRC_SAMPLE(1) + SRC_SAMPLE(-1)) * 2568)                \
+                 + ((SRC_SAMPLE(2) + SRC_SAMPLE(-2)) * 1509)                \
+                 + ((SRC_SAMPLE(3) + SRC_SAMPLE(-3)) * 331);                \
+                                                                            \
+            out1 = out1 / 30000;                                            \
+                                                                            \
+            out2 = ((SRC_SAMPLE(4) + SRC_SAMPLE(-4)) * 454)                 \
+                 + ((SRC_SAMPLE(5) + SRC_SAMPLE(-5)) * 620)                 \
+                 + ((SRC_SAMPLE(6) + SRC_SAMPLE(-6)) * 305);                \
+                                                                            \
+            out2 = out2 / 30000;                                            \
+                                                                            \
+            out3 = ((SRC_SAMPLE(7) + SRC_SAMPLE(-7)) * 127)                 \
+                 + ((SRC_SAMPLE(8) + SRC_SAMPLE(-8)) * 350)                 \
+                 + ((SRC_SAMPLE(9) + SRC_SAMPLE(-9)) * 265)                 \
+                 + ((SRC_SAMPLE(10) + SRC_SAMPLE(-10)) * 6);                \
+                                                                            \
+            out3 = out3 / 30000;                                            \
+                                                                            \
+            out4 = ((SRC_SAMPLE(11) + SRC_SAMPLE(-11)) * 201);              \
+                                                                            \
+            out4 = out4 / 30000;                                            \
+                                                                            \
+            out5 = out1 - out2 + out3 - out4;                               \
+                                                                            \
+            CHECK_SATURATION16(out5);                                       \
+            *psBtOut++ = (INT16)out5;                                       \
+                                                                            \
+            pS += SRC_CHANNELS;                                             \
+        }                                                                   \
+    }
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#define CONVERT_11025_TO_BLUETOOTH(pStart, pEnd)                            \
+    {                                                                       \
+        INT32         out1;                                                   \
+        SRC_TYPE    *pS = (SRC_TYPE *)pStart;                               \
+        SRC_TYPE    *pSEnd = (SRC_TYPE *)pEnd;                              \
+                                                                            \
+        while (pS < pSEnd)                                                  \
+        {                                                                   \
+            CurrentPos -= 8000;                                             \
+                                                                            \
+            if (CurrentPos >= 0)                                            \
+            {                                                               \
+                pS += SRC_CHANNELS;                                         \
+                continue;                                                   \
+            }                                                               \
+            CurrentPos += dwSrcSps;                                         \
+                                                                            \
+            out1 = (SRC_SAMPLE(0) * 6349)                                   \
+                 + ((SRC_SAMPLE(1) + SRC_SAMPLE(-1)) * 2874)                \
+                 - ((SRC_SAMPLE(2) + SRC_SAMPLE(-2)) * 1148)                \
+                 - ((SRC_SAMPLE(3) + SRC_SAMPLE(-3)) * 287)                 \
+                 + ((SRC_SAMPLE(4) + SRC_SAMPLE(-4)) * 675)                 \
+                 - ((SRC_SAMPLE(5) + SRC_SAMPLE(-5)) * 258)                 \
+                 - ((SRC_SAMPLE(6) + SRC_SAMPLE(-6)) * 206)                 \
+                 + ((SRC_SAMPLE(7) + SRC_SAMPLE(-7)) * 266);                \
+                                                                            \
+            out1 = out1 / 30000;                                            \
+                                                                            \
+            CHECK_SATURATION16(out1);                                       \
+            *psBtOut++ = (INT16)out1;                                       \
+                                                                            \
+            pS += SRC_CHANNELS;                                             \
+        }                                                                   \
+    }
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#undef  SRC_CHANNELS
+#undef  SRC_SAMPLE
+#undef  SRC_TYPE
+
+#define SRC_TYPE        UINT8
+#define SRC_CHANNELS    1
+#define SRC_SAMPLE(x)   ((pS[x]  - 0x80) << 8)
+
+/*****************************************************************************
+**  Local Function
+*****************************************************************************/
+INT32 Convert_8M_ToBT_Filtered (UINT8 *pSrc, void *pDst, UINT32 dwSrcSamples,
+                    UINT32 dwSrcSps, INT32 *pLastCurPos, UINT8 *pOverlapArea)
+{
+    INT32             CurrentPos = *pLastCurPos;
+    SRC_TYPE        *pIn, *pInEnd;
+    SRC_TYPE        *pOv, *pOvEnd;
+    INT16           *psBtOut = (INT16 *)pDst;
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG1("Convert_8M_ToBT_Filtered,  CurrentPos %d\n", CurrentPos);
+#endif
+    memcpy (pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 2), pSrc, BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    pOv    = (SRC_TYPE *)(pOverlapArea + BTA_DM_PCM_OVERLAP_SIZE);
+	pOvEnd = (SRC_TYPE *)(pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 3));
+
+    pIn     = (SRC_TYPE *)(pSrc + BTA_DM_PCM_OVERLAP_SIZE);
+	pInEnd  = (SRC_TYPE *)(pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - \
+        BTA_DM_PCM_OVERLAP_SIZE);
+
+    if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_44100)
+    {
+        CONVERT_44100_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_44100_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_22050)
+    {
+        CONVERT_22050_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_22050_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_11025)
+    {
+        CONVERT_11025_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_11025_TO_BLUETOOTH(pIn, pInEnd);
+    }
+
+    memcpy (pOverlapArea, pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - \
+        (BTA_DM_PCM_OVERLAP_SIZE * 2), BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    *pLastCurPos = CurrentPos;
+
+    return (psBtOut - (INT16 *)pDst);
+}
+
+INT32 Convert_8M_ToBT_NoFilter (void *pSrc, void *pDst, UINT32 dwSrcSamples, UINT32 dwSrcSps)
+{
+    INT32             CurrentPos;
+    UINT8            *pbSrc = (UINT8 *)pSrc;
+    INT16           *psDst = (INT16 *)pDst;
+    INT16           sWorker;
+
+    //      start at dwSpsSrc / 2, decrement by 8000
+    //
+    CurrentPos = (dwSrcSps >> 1);
+
+    while (dwSrcSamples--)
+    {
+        CurrentPos -= 8000;
+
+        if (CurrentPos >= 0)
+            pbSrc++;
+        else
+        {
+            sWorker = *pbSrc++;
+            sWorker -= 0x80;
+            sWorker <<= 8;
+
+            *psDst++ = sWorker;
+
+            CurrentPos += dwSrcSps;
+        }
+    }
+
+    return (psDst - (INT16 *)pDst);
+}
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#undef  SRC_CHANNELS
+#undef  SRC_SAMPLE
+#undef  SRC_TYPE
+
+#define SRC_TYPE        INT16
+#define SRC_CHANNELS    1
+#define SRC_SAMPLE(x)   pS[x]
+
+INT32 Convert_16M_ToBT_Filtered (UINT8 *pSrc, void *pDst, UINT32 dwSrcSamples,
+                                 UINT32 dwSrcSps, INT32 *pLastCurPos, UINT8 *pOverlapArea)
+{
+    INT32             CurrentPos = *pLastCurPos;
+    SRC_TYPE        *pIn, *pInEnd;
+    SRC_TYPE        *pOv, *pOvEnd;
+    INT16           *psBtOut = (INT16 *)pDst;
+
+    memcpy (pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 2), pSrc, BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    pOv    = (SRC_TYPE *)(pOverlapArea + BTA_DM_PCM_OVERLAP_SIZE);
+	pOvEnd = (SRC_TYPE *)(pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 3));
+
+    pIn     = (SRC_TYPE *)(pSrc + BTA_DM_PCM_OVERLAP_SIZE);
+	pInEnd  = (SRC_TYPE *)(pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - BTA_DM_PCM_OVERLAP_SIZE);
+
+    if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_44100)
+    {
+        CONVERT_44100_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_44100_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_22050)
+    {
+        CONVERT_22050_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_22050_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_11025)
+    {
+        CONVERT_11025_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_11025_TO_BLUETOOTH(pIn, pInEnd);
+    }
+
+    memcpy (pOverlapArea, pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - \
+        (BTA_DM_PCM_OVERLAP_SIZE * 2), BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    *pLastCurPos = CurrentPos;
+
+    return (psBtOut - (INT16 *)pDst);
+}
+
+INT32 Convert_16M_ToBT_NoFilter (void *pSrc, void *pDst, UINT32 dwSrcSamples, UINT32 dwSrcSps)
+{
+    INT32             CurrentPos;
+    INT16           *psSrc = (INT16 *)pSrc;
+    INT16           *psDst = (INT16 *)pDst;
+
+    //      start at dwSpsSrc / 2, decrement by 8000
+    //
+    CurrentPos = (dwSrcSps >> 1);
+
+    while (dwSrcSamples--)
+    {
+        CurrentPos -= 8000;
+
+        if (CurrentPos >= 0)
+            psSrc++;
+        else
+        {
+            *psDst++ = *psSrc++;
+
+            CurrentPos += dwSrcSps;
+        }
+    }
+
+    return (psDst - (INT16 *)pDst);
+}
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#undef  SRC_CHANNELS
+#undef  SRC_SAMPLE
+#undef  SRC_TYPE
+
+#define SRC_TYPE        UINT8
+#define SRC_CHANNELS    2
+#define SRC_SAMPLE(x) ((((pS[x * 2]  - 0x80) << 8) + ((pS[(x * 2) + 1]  - 0x80) << 8)) >> 1)
+
+INT32 Convert_8S_ToBT_Filtered (UINT8 *pSrc, void *pDst, UINT32 dwSrcSamples,
+                                UINT32 dwSrcSps, INT32 *pLastCurPos, UINT8 *pOverlapArea)
+{
+    INT32             CurrentPos = *pLastCurPos;
+    SRC_TYPE        *pIn, *pInEnd;
+    SRC_TYPE        *pOv, *pOvEnd;
+    INT16           *psBtOut = (INT16 *)pDst;
+
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG5("Convert_8S_ToBT_Filtered CurrentPos %d, SRC_TYPE %d, SRC_CHANNELS %d, \
+        dwSrcSamples %d,  dwSrcSps %d",  	CurrentPos, sizeof (SRC_TYPE), SRC_CHANNELS, \
+        dwSrcSamples, dwSrcSps);
+#endif
+    memcpy (pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 2), pSrc, BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    pOv    = (SRC_TYPE *)(pOverlapArea + BTA_DM_PCM_OVERLAP_SIZE);
+	pOvEnd = (SRC_TYPE *)(pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 3));
+
+    pIn     = (SRC_TYPE *)(pSrc + BTA_DM_PCM_OVERLAP_SIZE);
+	pInEnd  = (SRC_TYPE *)(pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - BTA_DM_PCM_OVERLAP_SIZE);
+
+    if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_44100)
+    {
+        CONVERT_44100_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_44100_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_22050)
+    {
+        CONVERT_22050_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_22050_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_11025)
+    {
+        CONVERT_11025_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_11025_TO_BLUETOOTH(pIn, pInEnd);
+    }
+
+    memcpy (pOverlapArea, pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - \
+        (BTA_DM_PCM_OVERLAP_SIZE * 2), BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    *pLastCurPos = CurrentPos;
+
+    return (psBtOut - (INT16 *)pDst);
+}
+
+INT32 Convert_8S_ToBT_NoFilter (void *pSrc, void *pDst, UINT32 dwSrcSamples, UINT32 dwSrcSps)
+{
+    INT32             CurrentPos;
+    UINT8            *pbSrc = (UINT8 *)pSrc;
+    INT16           *psDst = (INT16 *)pDst;
+    INT16           sWorker, sWorker2;
+
+    //      start at dwSpsSrc / 2, decrement by 8000
+    //
+    CurrentPos = (dwSrcSps >> 1);
+
+    while (dwSrcSamples--)
+    {
+        CurrentPos -= 8000;
+
+        if (CurrentPos >= 0)
+            pbSrc += 2;
+        else
+        {
+            sWorker = *(unsigned char *)pbSrc;
+            sWorker -= 0x80;
+            sWorker <<= 8;
+            pbSrc++;
+
+            sWorker2 = *(unsigned char *)pbSrc;
+            sWorker2 -= 0x80;
+            sWorker2 <<= 8;
+            pbSrc++;
+
+            sWorker += sWorker2;
+            sWorker >>= 1;
+
+            *psDst++ = sWorker;
+
+            CurrentPos += dwSrcSps;
+        }
+    }
+
+    return (psDst - (INT16 *)pDst);
+}
+
+
+////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+#undef  SRC_CHANNELS
+#undef  SRC_SAMPLE
+#undef  SRC_TYPE
+
+#define SRC_TYPE        INT16
+#define SRC_CHANNELS    2
+#define SRC_SAMPLE(x) ((pS[x * 2] + pS[(x * 2) + 1]) >> 1)
+
+INT32 Convert_16S_ToBT_Filtered (UINT8 *pSrc, void *pDst, UINT32 dwSrcSamples,
+                                 UINT32 dwSrcSps, INT32 *pLastCurPos, UINT8 *pOverlapArea)
+{
+    INT32             CurrentPos = *pLastCurPos;
+    SRC_TYPE        *pIn, *pInEnd;
+    SRC_TYPE        *pOv, *pOvEnd;
+    INT16           *psBtOut = (INT16 *)pDst;
+
+    memcpy (pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 2), pSrc, BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    pOv    = (SRC_TYPE *)(pOverlapArea + BTA_DM_PCM_OVERLAP_SIZE);
+	pOvEnd = (SRC_TYPE *)(pOverlapArea + (BTA_DM_PCM_OVERLAP_SIZE * 3));
+
+    pIn     = (SRC_TYPE *)(pSrc + BTA_DM_PCM_OVERLAP_SIZE);
+	pInEnd  = (SRC_TYPE *)(pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - BTA_DM_PCM_OVERLAP_SIZE);
+
+    if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_44100)
+    {
+        CONVERT_44100_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_44100_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_22050)
+    {
+        CONVERT_22050_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_22050_TO_BLUETOOTH(pIn, pInEnd);
+    }
+    else if (dwSrcSps == BTA_DM_PCM_SMPL_RATE_11025)
+    {
+        CONVERT_11025_TO_BLUETOOTH(pOv, pOvEnd);
+        CONVERT_11025_TO_BLUETOOTH(pIn, pInEnd);
+    }
+
+    memcpy (pOverlapArea, pSrc + (dwSrcSamples * SRC_CHANNELS * sizeof (SRC_TYPE)) - \
+        (BTA_DM_PCM_OVERLAP_SIZE * 2), BTA_DM_PCM_OVERLAP_SIZE * 2);
+
+    *pLastCurPos = CurrentPos;
+
+    return (psBtOut - (INT16 *)pDst);
+}
+
+INT32 Convert_16S_ToBT_NoFilter (void *pSrc, void *pDst, UINT32 dwSrcSamples, UINT32 dwSrcSps)
+{
+    INT32             CurrentPos;
+    INT16           *psSrc = (INT16 *)pSrc;
+    INT16           *psDst = (INT16 *)pDst;
+    INT16           sWorker;
+
+    //      start at dwSpsSrc / 2, decrement by 8000
+    //
+    CurrentPos = (dwSrcSps >> 1);
+
+    while (dwSrcSamples--)
+    {
+        CurrentPos -= 8000;
+
+        if (CurrentPos >= 0)
+            psSrc += 2;
+        else
+        {
+            /* CR 82894, to avoid overflow, divide before add */
+            sWorker  = ((*psSrc) >> 1 );
+            psSrc++;
+            sWorker += ((*psSrc) >> 1 );
+            psSrc++;
+
+            *psDst++ = sWorker;
+
+            CurrentPos += dwSrcSps;
+        }
+    }
+
+    return (psDst - (INT16 *)pDst);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_DmPcmInitSamples
+**
+** Description      initialize the down sample converter.
+**
+**                  src_sps: original samples per second (source audio data)
+**                            (ex. 44100, 48000)
+**                  bits: number of bits per pcm sample (16)
+**                  n_channels: number of channels (i.e. mono(1), stereo(2)...)
+**
+** Returns          none
+**
+*******************************************************************************/
+void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels)
+{
+    tBTA_DM_PCM_RESAMPLE_CB *p_cb = &bta_dm_pcm_cb;
+
+    p_cb->cur_pos       = src_sps / 2;
+    p_cb->src_sps       = src_sps;
+    p_cb->bits          = bits;
+    p_cb->n_channels    = n_channels;
+    p_cb->sample_size   = 2;
+    p_cb->divisor	    = 2;
+
+    memset(p_cb->overlap_area, 0, sizeof(p_cb->overlap_area) );
+
+    if ((src_sps == BTA_DM_PCM_SMPL_RATE_44100) ||
+        (src_sps == BTA_DM_PCM_SMPL_RATE_22050) ||
+        (src_sps == BTA_DM_PCM_SMPL_RATE_11025))
+         p_cb->can_be_filtered = 1;
+    else
+         p_cb->can_be_filtered = 0;
+
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG2("bta_dm_pcm_init_samples: n_channels = %d bits = %d", n_channels, bits);
+#endif
+    if(n_channels == 1)
+    {
+        /* mono */
+        if(bits == 8)
+        {
+            p_cb->filter = (PCONVERT_TO_BT_FILTERED) Convert_8M_ToBT_Filtered;
+            p_cb->nofilter = (PCONVERT_TO_BT_NOFILTER) Convert_8M_ToBT_NoFilter;
+	        p_cb->divisor	 = 1;
+        }
+        else
+        {
+            p_cb->filter = (PCONVERT_TO_BT_FILTERED) Convert_16M_ToBT_Filtered;
+            p_cb->nofilter = (PCONVERT_TO_BT_NOFILTER) Convert_16M_ToBT_NoFilter;
+        }
+    }
+    else
+    {
+        /* stereo */
+        if(bits == 8)
+        {
+            p_cb->filter = (PCONVERT_TO_BT_FILTERED) Convert_8S_ToBT_Filtered;
+            p_cb->nofilter = (PCONVERT_TO_BT_NOFILTER) Convert_8S_ToBT_NoFilter;
+        }
+        else
+        {
+            p_cb->filter = (PCONVERT_TO_BT_FILTERED) Convert_16S_ToBT_Filtered;
+            p_cb->nofilter = (PCONVERT_TO_BT_NOFILTER) Convert_16S_ToBT_NoFilter;
+	        p_cb->divisor	 = 4;
+        }
+    }
+
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG2("bta_pcm_init_dwn_sample: cur_pos %d, src_sps %d", \
+		p_cb->cur_pos, p_cb->src_sps);
+    APPL_TRACE_DEBUG3("bta_pcm_init_dwn_sample: bits %d, n_channels %d, sample_size %d, ", \
+		p_cb->bits, p_cb->n_channels, p_cb->sample_size);
+    APPL_TRACE_DEBUG3("bta_pcm_init_dwn_sample: can_be_filtered %d, n_channels: %d, \
+        divisor %d", p_cb->can_be_filtered, p_cb->n_channels, p_cb->divisor);
+#endif
+
+}
+
+/**************************************************************************************
+** Function         BTA_DmPcmResample
+**
+** Description      Down sampling utility to convert higher sampling rate into 8K/16bits
+**                  PCM samples.
+**
+** Parameters       p_src: pointer to the buffer where the original sampling PCM
+**                              are stored.
+**                  in_bytes:  Length of the input PCM sample buffer in byte.
+**                  p_dst:      pointer to the buffer which is to be used to store
+**                              the converted PCM samples.
+**
+**
+** Returns          INT32: number of samples converted.
+**
+**************************************************************************************/
+INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst)
+{
+    UINT32 out_sample;
+
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG1("bta_pcm_resample : insamples  %d",  (in_bytes  / bta_dm_pcm_cb.divisor));
+#endif
+    if(bta_dm_pcm_cb.can_be_filtered)
+    {
+        out_sample = (*bta_dm_pcm_cb.filter) (p_src, p_dst, (in_bytes  / bta_dm_pcm_cb.divisor),
+            bta_dm_pcm_cb.src_sps, (INT32 *) &bta_dm_pcm_cb.cur_pos, bta_dm_pcm_cb.overlap_area);
+    }
+    else
+    {
+        out_sample = (*bta_dm_pcm_cb.nofilter) (p_src, p_dst,
+            (in_bytes / bta_dm_pcm_cb.divisor), bta_dm_pcm_cb.src_sps);
+    }
+
+#if BTA_DM_SCO_DEBUG
+    APPL_TRACE_DEBUG1("bta_pcm_resample : outsamples  %d",  out_sample);
+#endif
+
+    return (out_sample * bta_dm_pcm_cb.sample_size);
+}
+#endif
diff --git a/bta/fs/bta_fs_cfg.c b/bta/fs/bta_fs_cfg.c
new file mode 100644
index 0000000..0bfffcd
--- /dev/null
+++ b/bta/fs/bta_fs_cfg.c
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the BTA File
+ *  System.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "bta_fs_api.h"
+
+/* Character used as path separator */
+#ifndef BTA_FS_PATH_SEPARATOR
+#define BTA_FS_PATH_SEPARATOR   ((char) 0x2f)   /* 0x2f ('/'), or 0x5c ('\') */
+#endif
+
+/* Maximum path length supported by MMI */
+#ifndef BTA_FS_PATH_LEN
+#define BTA_FS_PATH_LEN         294
+#endif
+
+#ifndef BTA_FS_FILE_LEN
+#define BTA_FS_FILE_LEN         256
+#endif
+
+const tBTA_FS_CFG bta_fs_cfg =
+{
+    BTA_FS_FILE_LEN,
+    BTA_FS_PATH_LEN,
+    BTA_FS_PATH_SEPARATOR
+};
+
+tBTA_FS_CFG *p_bta_fs_cfg = (tBTA_FS_CFG *)&bta_fs_cfg;
+
diff --git a/bta/fs/bta_fs_ci.c b/bta/fs/bta_fs_ci.c
new file mode 100644
index 0000000..589a591
--- /dev/null
+++ b/bta/fs/bta_fs_ci.c
@@ -0,0 +1,280 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the file system call-in functions.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_fs_ci.h"
+#include "gki.h"
+#include "bd.h"
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_write
+**
+** Description      This function sends an event to IO indicating the phone
+**                  has written the number of bytes specified in the call-out
+**                  function, bta_fs_co_write(), and is ready for more data.
+**                  This function is used to control the TX data flow.
+**                  Note: The data buffer is released by the stack after
+**                        calling this function.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK or BTA_FS_CO_FAIL
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_write(int fd, tBTA_FS_CO_STATUS status, UINT16 evt)
+{
+    tBTA_FS_CI_WRITE_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_FS_CI_WRITE_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_WRITE_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->fd = fd;
+        p_evt->status = status;
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_read
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  read in the requested amount of data specified in the
+**                  bta_fs_co_read() call-out function.  It should only be called
+**                  when the requested number of bytes has been read in, or after
+**                  the end of the file has been detected.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  num_bytes_read - number of bytes read into the buffer
+**                      specified in the read callout-function.
+**                  status - BTA_FS_CO_OK if full buffer of data,
+**                           BTA_FS_CO_EOF if the end of file has been reached,
+**                           BTA_FS_CO_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_read(int fd, UINT16 num_bytes_read, tBTA_FS_CO_STATUS status, UINT16 evt)
+{
+    tBTA_FS_CI_READ_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_FS_CI_READ_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_READ_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->fd        = fd;
+        p_evt->status    = status;
+        p_evt->num_read  = num_bytes_read;
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_open
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  finished opening a file for reading or writing.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK if file was opened in mode specified
+**                                          in the call-out function.
+**                           BTA_FS_CO_EACCES if the file exists, but contains
+**                                          the wrong access permissions.
+**                           BTA_FS_CO_FAIL if any other error has occurred.
+**                  file_size - The total size of the file
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_open(int fd, tBTA_FS_CO_STATUS status, UINT32 file_size, UINT16 evt)
+{
+    tBTA_FS_CI_OPEN_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_FS_CI_OPEN_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_OPEN_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->fd        = fd;
+        p_evt->status    = status;
+        p_evt->file_size = file_size;
+        p_evt->p_file    = NULL;
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_direntry
+**
+** Description      This function is called in response to the
+**                  bta_fs_co_getdirentry call-out function.
+**
+** Parameters       status - BTA_FS_CO_OK if p_entry points to a valid entry.
+**                           BTA_FS_CO_EODIR if no more entries (p_entry is ignored).
+**                           BTA_FS_CO_FAIL if any errors have occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_direntry(tBTA_FS_CO_STATUS status, UINT16 evt)
+{
+    tBTA_FS_CI_GETDIR_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_FS_CI_GETDIR_EVT *)GKI_getbuf(sizeof(tBTA_FS_CI_GETDIR_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_resume
+**
+** Description      This function is called in response to the
+**                  bta_fs_co_resume call-out function.
+**
+** Parameters       p_sess_info - the stored session ID and related information.
+**                  timeout - the timeout for this suspended session.
+**                  ssn     - the stored session sequence number.
+**                  info    - the stored BTA specific information (like last active operation).
+**                  status  - BTA_FS_CO_OK if p_entry points to a valid entry.
+**                            BTA_FS_CO_FAIL if any errors have occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_resume (BD_ADDR_PTR p_addr, UINT8 *p_sess_info,
+                       UINT32 timeout, UINT32 offset, UINT8 ssn, UINT8 info,
+                       tBTA_FS_CO_STATUS status, UINT16 evt)
+{
+    tBTA_FS_CI_RESUME_EVT  *p_evt;
+    UINT16  size = sizeof(tBTA_FS_CI_RESUME_EVT) + sizeof(BD_ADDR);
+
+    if ((p_evt = (tBTA_FS_CI_RESUME_EVT *)GKI_getbuf(size)) != NULL)
+    {
+        p_evt->p_addr       = NULL;
+        if (p_addr != NULL)
+        {
+            p_evt->p_addr   = (BD_ADDR_PTR)(p_evt + 1);
+            bdcpy(p_evt->p_addr, p_addr);
+        }
+        p_evt->hdr.event    = evt;
+        p_evt->p_sess_info  = p_sess_info;
+        p_evt->timeout      = timeout;
+        p_evt->offset       = offset;
+        p_evt->ssn          = ssn;
+        p_evt->info         = info;
+        p_evt->status       = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_action
+**
+** Description      This function is called in response to one of the action
+**                  call-out functions: bta_fs_co_copy, bta_fs_co_rename or
+**                  bta_fs_co_set_perms.
+**
+** Parameters       status  - BTA_FS_CO_OK if the action is succession.
+**                            BTA_FS_CO_FAIL if any errors have occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_action(tBTA_FS_CO_STATUS status, UINT16 evt)
+{
+    tBTA_FS_CI_ACTION_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_FS_CI_ACTION_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_ACTION_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->status    = status;
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_resume_op
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  finished opening a file for reading or writing on resume.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK if file was opened in mode specified
+**                                          in the call-out function.
+**                           BTA_FS_CO_EACCES if the file exists, but contains
+**                                          the wrong access permissions.
+**                           BTA_FS_CO_FAIL if any other error has occurred.
+**                  p_file - The file name associated with fd
+**                  file_size - The total size of the file
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_ci_resume_op(int fd, tBTA_FS_CO_STATUS status, const char *p_file,
+                         UINT32 file_size, UINT16 evt)
+{
+    tBTA_FS_CI_OPEN_EVT  *p_evt;
+    UINT16  file_len = strlen(p_file) + 1;
+    UINT16  size = sizeof(tBTA_FS_CI_OPEN_EVT) + file_len;
+    char *p;
+
+    if ((p_evt = (tBTA_FS_CI_OPEN_EVT *) GKI_getbuf(size)) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->fd        = fd;
+        p_evt->status    = status;
+        p_evt->file_size = file_size;
+        p   = (char *)(p_evt + 1);
+        BCM_STRNCPY_S (p, file_len, p_file, file_len-1);
+        p[file_len] = '\0';
+        p_evt->p_file    = (const char *)p;
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
diff --git a/bta/gatt/bta_gattc_act.c b/bta/gatt/bta_gattc_act.c
new file mode 100644
index 0000000..5cacf03
--- /dev/null
+++ b/bta/gatt/bta_gattc_act.c
@@ -0,0 +1,1802 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT client action functions for the state
+ *  machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+
+#include "utl.h"
+#include "gki.h"
+#include "bd.h"
+#include "bta_sys.h"
+
+#include "bta_gattc_int.h"
+#include "l2c_api.h"
+
+
+#include <string.h>
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+static void bta_gattc_conn_cback(tGATT_IF gattc_if, BD_ADDR bda, UINT16 conn_id,
+                                 BOOLEAN connected, tGATT_DISCONN_REASON reason);
+
+static void  bta_gattc_cmpl_cback(UINT16 conn_id, tGATTC_OPTYPE op, tGATT_STATUS status,
+                                  tGATT_CL_COMPLETE *p_data);
+
+static tGATT_CBACK bta_gattc_cl_cback =
+{
+    bta_gattc_conn_cback,
+    bta_gattc_cmpl_cback,
+    bta_gattc_disc_res_cback,
+    bta_gattc_disc_cmpl_cback,
+    NULL
+};
+
+/* opcode(tGATTC_OPTYPE) order has to be comply with internal event order */
+static UINT16 bta_gattc_opcode_to_int_evt[] =
+{
+    BTA_GATTC_API_READ_EVT,
+    BTA_GATTC_API_WRITE_EVT,
+    BTA_GATTC_API_EXEC_EVT
+};
+
+#if (BT_TRACE_VERBOSE == TRUE)
+static const char *bta_gattc_op_code_name[] =
+{
+    "Unknown",
+    "Discovery",
+    "Read",
+    "Write",
+    "Exec",
+    "Config",
+    "Notification",
+    "Indication"
+};
+#endif
+/*****************************************************************************
+**  Action Functions
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bta_gattc_register
+**
+** Description      Register a GATT client application with BTA.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_register(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC               cb_data;
+    UINT8                    i;
+    tBT_UUID                 *p_app_uuid = &p_data->api_reg.app_uuid;
+    tBTA_GATTC_INT_START_IF  *p_buf;
+
+
+    /* todo need to check duplicate uuid */
+    for (i = 0; i < BTA_GATTC_CL_MAX; i ++)
+    {
+        if (!p_cb->cl_rcb[i].in_use)
+        {
+            if ((p_app_uuid == NULL) || (p_cb->cl_rcb[i].client_if = GATT_Register(p_app_uuid, &bta_gattc_cl_cback)) == 0)
+            {
+                APPL_TRACE_ERROR0("Register with GATT stack failed.");
+                cb_data.reg_oper.status = BTA_GATT_ERROR;
+            }
+            else
+
+            {
+                p_cb->cl_rcb[i].in_use = TRUE;
+                p_cb->cl_rcb[i].p_cback = p_data->api_reg.p_cback;
+                memcpy(&p_cb->cl_rcb[i].app_uuid, p_app_uuid, sizeof(tBT_UUID));
+
+                /* BTA use the same client interface as BTE GATT statck */
+                cb_data.reg_oper.client_if = p_cb->cl_rcb[i].client_if;
+// btla-specific ++
+                memcpy(&(cb_data.reg_oper.app_uuid),p_app_uuid,sizeof(tBT_UUID));
+// btla-specific --
+
+                cb_data.reg_oper.status = BTA_GATT_OK;
+
+                if ((p_buf = (tBTA_GATTC_INT_START_IF *) GKI_getbuf(sizeof(tBTA_GATTC_INT_START_IF))) != NULL)
+                {
+                    p_buf->hdr.event    = BTA_GATTC_INT_START_IF_EVT;
+                    p_buf->client_if    = p_cb->cl_rcb[i].client_if;
+
+                    bta_sys_sendmsg(p_buf);
+                }
+                else
+                {
+                    cb_data.reg_oper.status = BTA_GATT_NO_RESOURCES;
+                    memset( &p_cb->cl_rcb[i], 0 , sizeof(tBTA_GATTC_RCB));
+                }
+                break;
+            }
+        }
+    }
+    /* callback with register event */
+    if (p_data->api_reg.p_cback)
+    {
+        (*p_data->api_reg.p_cback)(BTA_GATTC_REG_EVT,  (tBTA_GATTC *)&cb_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_start_if
+**
+** Description      start an application interface.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gattc_start_if(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_msg)
+{
+    if (bta_gattc_cl_get_regcb(p_msg->int_start_if.client_if) !=NULL )
+    {
+        GATT_StartIf(p_msg->int_start_if.client_if);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Unable to start app.: Unknown interface =%d",p_msg->int_start_if.client_if );
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gattc_deregister_cmpl
+**
+** Description      De-Register a GATT client application with BTA completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_int_deregister_cmpl(tBTA_GATTC_RCB *p_clreg, tBTA_GATTC_IF client_if)
+{
+    tBTA_GATTC_CBACK    *p_cback = p_clreg->p_cback;
+    tBTA_GATTC          cb_data;
+
+
+    APPL_TRACE_DEBUG1("bta_gattc_int_deregister_cmpl client_if=%d", client_if );
+
+    GATT_Deregister(p_clreg->client_if);
+    memset(p_clreg, 0, sizeof(tBTA_GATTC_RCB));
+
+    cb_data.reg_oper.client_if = client_if;
+    cb_data.reg_oper.status    = BTA_GATT_OK;
+
+    if (p_cback)
+        /* callback with de-register event */
+        (*p_cback)(BTA_GATTC_DEREG_EVT,  (tBTA_GATTC *)&cb_data);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gattc_deregister_cmpl
+**
+** Description      De-Register a GATT client application with BTA completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_deregister_cmpl(tBTA_GATTC_RCB *p_clreg, tBTA_GATTC_IF client_if)
+{
+    tBTA_GATTC_INT_DEREG  *p_buf;
+
+    APPL_TRACE_DEBUG1("bta_gattc_deregister_cmpl client_if=%d", client_if );
+
+    if ((p_buf = (tBTA_GATTC_INT_DEREG *) GKI_getbuf(sizeof(tBTA_GATTC_INT_DEREG))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTC_INT_DEREG_EVT;
+        p_buf->client_if = client_if;
+        bta_sys_sendmsg(p_buf);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_gattc_deregister_cmpl unable to allocate buffer to complete dereg=%d", client_if);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_deregister
+**
+** Description      De-Register a GATT client application with BTA.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_int_deregister(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data)
+{
+
+    tBTA_GATTC_IF       client_if = p_data->int_dereg.client_if;
+    tBTA_GATTC_CBACK    *p_cback;
+    tBTA_GATTC          cb_data;
+    tBTA_GATTC_RCB      *p_clreg;
+
+
+    APPL_TRACE_DEBUG1("bta_gattc_int_deregister_cmpl client_if=%d", client_if );
+
+    if ((p_clreg = bta_gattc_cl_get_regcb(client_if)) != NULL)
+    {
+        p_cback = p_clreg->p_cback;
+        GATT_Deregister(client_if);
+        memset(p_clreg, 0, sizeof(tBTA_GATTC_RCB));
+        cb_data.reg_oper.client_if = client_if;
+        cb_data.reg_oper.status    = BTA_GATT_OK;
+
+        if (p_cback)
+            /* callback with de-register event */
+            (*p_cback)(BTA_GATTC_DEREG_EVT,  (tBTA_GATTC *)&cb_data);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_gattc_int_deregister Deregister Failed, unknown client_if: %d", p_data->int_dereg.client_if);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gattc_deregister
+**
+** Description      De-Register a GATT client application with BTA.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_deregister(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_RCB      *p_clreg;
+    UINT8               i;
+    BT_HDR              buf;
+
+    if ((p_clreg = bta_gattc_cl_get_regcb(p_data->api_dereg.client_if)) != NULL)
+    {
+        if (p_clreg->num_clcb > 0)
+        {
+            /* close all CLCB related to this app */
+            for (i= 0; i < BTA_GATTC_CLCB_MAX; i ++)
+            {
+                if (p_cb->clcb[i].in_use && (p_cb->clcb[i].p_rcb == p_clreg))
+                {
+                    p_clreg->dereg_pending = TRUE;
+
+                    buf.event = BTA_GATTC_API_CLOSE_EVT;
+                    buf.layer_specific = p_cb->clcb[i].bta_conn_id;
+                    bta_gattc_close(&p_cb->clcb[i], (tBTA_GATTC_DATA *)&buf)  ;
+                }
+            }
+        }
+        else
+            bta_gattc_deregister_cmpl(p_clreg, p_clreg->client_if);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_gattc_deregister Deregister Failed, unknown client_if: %d", p_data->api_dereg.client_if);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_process_api_open
+**
+** Description      process connect API request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_process_api_open (tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA * p_msg)
+{
+    UINT16 event = ((BT_HDR *)p_msg)->event;
+    tBTA_GATTC_CLCB *p_clcb = NULL;
+    tBTA_GATTC_RCB *p_clreg = bta_gattc_cl_get_regcb(p_msg->api_conn.client_if);
+
+    if (p_clreg != NULL)
+    {
+        if (p_msg->api_conn.is_direct)
+        {
+            if ((p_clcb = bta_gattc_find_alloc_clcb(p_msg->api_conn.client_if,
+                                                    p_msg->api_conn.remote_bda)) != NULL)
+            {
+                bta_gattc_sm_execute(p_clcb, event, p_msg);
+            }
+            else
+            {
+                APPL_TRACE_ERROR0("No resources to open a new connection.");
+
+                bta_gattc_send_open_cback(p_clreg,
+                                          BTA_GATT_NO_RESOURCES,
+                                          p_msg->api_conn.remote_bda,
+                                          BTA_GATT_INVALID_CONN_ID);
+            }
+        }
+        else
+        {
+            bta_gattc_init_bk_conn(&p_msg->api_conn, p_clreg);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_gattc_process_api_open Failed, unknown client_if: %d",
+                        p_msg->api_conn.client_if);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_process_api_open_cancel
+**
+** Description      process connect API request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_process_api_open_cancel (tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA * p_msg)
+{
+    UINT16 event = ((BT_HDR *)p_msg)->event;
+    tBTA_GATTC_CLCB *p_clcb = NULL;
+    tBTA_GATTC_RCB *p_clreg;
+    tBTA_GATT_STATUS status = BTA_GATT_ERROR;
+
+    if (p_msg->api_cancel_conn.is_direct)
+    {
+        if ((p_clcb = bta_gattc_find_clcb_by_cif(p_msg->api_cancel_conn.client_if,
+                                                 p_msg->api_cancel_conn.remote_bda)) != NULL)
+        {
+            bta_gattc_sm_execute(p_clcb, event, p_msg);
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("No such connection need to be cancelled");
+
+            p_clreg = bta_gattc_cl_get_regcb(p_msg->api_cancel_conn.client_if);
+
+            if (p_clreg && p_clreg->p_cback)
+            {
+                (*p_clreg->p_cback)(BTA_GATTC_CANCEL_OPEN_EVT, (tBTA_GATTC *)&status);
+            }
+        }
+    }
+    else
+    {
+        bta_gattc_cancel_bk_conn(&p_msg->api_cancel_conn);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_cancel_open_error
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_cancel_open_error(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATT_STATUS status=BTA_GATT_ERROR;
+
+    if ( p_clcb->p_rcb->p_cback )
+        (*p_clcb->p_rcb->p_cback)(BTA_GATTC_CANCEL_OPEN_EVT, (tBTA_GATTC *)&status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_open_error
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_open_error(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    APPL_TRACE_ERROR0("Connection already opened. wrong state");
+
+    bta_gattc_send_open_cback(p_clcb->p_rcb,
+                              BTA_GATT_ALREADY_OPEN,
+                              p_clcb->bda,
+                              p_clcb->bta_conn_id);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_open_fail
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_open_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    bta_gattc_open_error(p_clcb, p_data);
+    /* open failure, remove clcb */
+    bta_gattc_clcb_dealloc(p_clcb);
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_open
+**
+** Description      Process API connection function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_DATA gattc_data;
+
+    /* open/hold a connection */
+    if (!GATT_Connect(p_clcb->p_rcb->client_if, p_data->api_conn.remote_bda, TRUE))
+    {
+        APPL_TRACE_ERROR0("Connection open failure");
+
+        bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_OPEN_FAIL_EVT, p_data);
+    }
+    else
+    {
+        /* a connected remote device */
+        if (GATT_GetConnIdIfConnected(p_clcb->p_rcb->client_if,
+                                      p_data->api_conn.remote_bda,
+                                      &p_clcb->bta_conn_id))
+        {
+            gattc_data.hdr.layer_specific = p_clcb->bta_conn_id;
+
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_CONN_EVT, &gattc_data);
+        }
+        /* else wait for the callback event */
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_init_bk_conn
+**
+** Description      Process API Open for a background connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_init_bk_conn(tBTA_GATTC_API_OPEN *p_data, tBTA_GATTC_RCB *p_clreg)
+{
+    tBTA_GATT_STATUS         status = BTA_GATT_NO_RESOURCES;
+    UINT16                   conn_id;
+    tBTA_GATTC_CLCB         *p_clcb;
+    tBTA_GATTC_DATA         gattc_data;
+
+    if (bta_gattc_mark_bg_conn(p_data->client_if, p_data->remote_bda, TRUE))
+    {
+        /* alwaya call open to hold a connection */
+        if (!GATT_Connect(p_data->client_if, p_data->remote_bda, FALSE))
+        {
+            status = BTA_GATT_ERROR;
+            APPL_TRACE_ERROR0("bta_gattc_init_bk_conn failed");
+        }
+        else
+        {
+            status = BTA_GATT_OK;
+
+            /* if is a connected remote device */
+            if (GATT_GetConnIdIfConnected(p_data->client_if,
+                                          p_data->remote_bda,
+                                          &conn_id))
+            {
+                if ((p_clcb = bta_gattc_clcb_alloc(p_data->client_if, p_data->remote_bda)) != NULL)
+                {
+                    gattc_data.hdr.layer_specific = p_clcb->bta_conn_id = conn_id;
+
+                    /* open connection */
+                    bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_CONN_EVT, &gattc_data);
+                    status = BTA_GATT_OK;
+                }
+            }
+        }
+    }
+
+    /* open failure, report OPEN_EVT */
+    if (status != BTA_GATT_OK)
+    {
+        bta_gattc_send_open_cback(p_clreg, status, p_data->remote_bda, BTA_GATT_INVALID_CONN_ID);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_cancel_bk_conn
+**
+** Description      Process API Cancel Open for a background connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_cancel_bk_conn(tBTA_GATTC_API_CANCEL_OPEN *p_data)
+{
+    tBTA_GATTC_RCB      *p_clreg;
+    tBTA_GATT_STATUS    status = BTA_GATT_ERROR;
+
+    /* remove the device from the bg connection mask */
+    if (bta_gattc_mark_bg_conn(p_data->client_if, p_data->remote_bda, FALSE))
+    {
+        if (GATT_CancelConnect(p_data->client_if, p_data->remote_bda, FALSE))
+        {
+            status = BTA_GATT_OK;
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("bta_gattc_cancel_bk_conn failed");
+        }
+    }
+    p_clreg = bta_gattc_cl_get_regcb(p_data->client_if);
+
+    if (p_clreg && p_clreg->p_cback)
+    {
+        (*p_clreg->p_cback)(BTA_GATTC_CANCEL_OPEN_EVT, (tBTA_GATTC *)&status);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_int_cancel_open_ok
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_cancel_open_ok(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATT_STATUS status = BTA_GATT_OK;
+
+    if ( p_clcb->p_rcb->p_cback )
+    {
+        (*p_clcb->p_rcb->p_cback)(BTA_GATTC_CANCEL_OPEN_EVT, (tBTA_GATTC *)&status);
+    }
+
+    bta_gattc_clcb_dealloc(p_clcb);
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_cancel_open
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_cancel_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATT_STATUS status=BTA_GATT_ERROR;
+
+    if (GATT_CancelConnect(p_clcb->p_rcb->client_if, p_data->api_cancel_conn.remote_bda, TRUE))
+    {
+        bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_CANCEL_OPEN_OK_EVT, p_data);
+    }
+    else
+    {
+        if ( p_clcb->p_rcb->p_cback )
+        {
+            (*p_clcb->p_rcb->p_cback)(BTA_GATTC_CANCEL_OPEN_EVT, (tBTA_GATTC *)&status);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_conn
+**
+** Description      receive connection callback from stack
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_conn(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_IF   gatt_if;
+    APPL_TRACE_DEBUG1("bta_gattc_conn server cache state=%d",p_clcb->p_srcb->state);
+
+    if (p_data != NULL)
+    {
+        APPL_TRACE_DEBUG1("bta_gattc_conn conn_id=%d",p_data->hdr.layer_specific);
+
+        p_clcb->p_srcb->connected = TRUE;
+        p_clcb->bta_conn_id  = p_data->hdr.layer_specific;
+        GATT_GetConnectionInfor(p_data->hdr.layer_specific, &gatt_if, p_clcb->bda);
+
+        /* start database cache if needed */
+        if (p_clcb->p_srcb->p_srvc_cache == NULL)
+        {
+            if (p_clcb->p_srcb->state == BTA_GATTC_SERV_IDLE)
+            {
+                p_clcb->p_srcb->state = BTA_GATTC_SERV_LOAD;
+                bta_gattc_sm_execute(p_clcb, BTA_GATTC_START_CACHE_EVT, p_data);
+            }
+            else /* cache is building */
+                p_clcb->state = BTA_GATTC_DISCOVER_ST;
+        }
+
+        else
+        {
+            /* a pending service handle change indication */
+            if (p_clcb->p_srcb->srvc_hdl_chg)
+            {
+                p_clcb->p_srcb->srvc_hdl_chg = FALSE;
+                /* start discovery */
+                bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_DISCOVER_EVT, NULL);
+            }
+        }
+
+        if (p_clcb->p_rcb)
+        {
+            bta_gattc_send_open_cback(p_clcb->p_rcb,
+                                      BTA_GATT_OK,
+                                      p_clcb->bda,
+                                      p_clcb->bta_conn_id);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_close_fail
+**
+** Description      close a  connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_close_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC           cb_data;
+
+    if ( p_clcb->p_rcb->p_cback )
+    {
+        memset(&cb_data, 0, sizeof(tBTA_GATTC));
+        cb_data.close.client_if = p_clcb->p_rcb->client_if;
+        cb_data.close.conn_id   = p_data->hdr.layer_specific;
+        bdcpy(cb_data.close.remote_bda, p_clcb->bda);
+        cb_data.close.status    = BTA_GATT_ERROR;
+        cb_data.close.reason    = BTA_GATT_CONN_NONE;
+
+
+        (*p_clcb->p_rcb->p_cback)(BTA_GATTC_CLOSE_EVT, &cb_data);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_api_close
+**
+** Description      close a GATTC connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_close(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_CBACK    *p_cback = p_clcb->p_rcb->p_cback;
+    tBTA_GATTC_RCB      *p_clreg = p_clcb->p_rcb;
+    tBTA_GATTC           cb_data;
+
+    APPL_TRACE_DEBUG1("bta_gattc_close conn_id=%d",p_clcb->bta_conn_id);
+
+    if (p_data->hdr.event == BTA_GATTC_API_CLOSE_EVT)
+        p_clcb->status = GATT_Disconnect(p_clcb->bta_conn_id);
+
+    cb_data.close.client_if = p_clcb->p_rcb->client_if;
+    cb_data.close.conn_id   = p_clcb->bta_conn_id;
+    cb_data.close.status    = p_clcb->status;
+    cb_data.close.reason    = p_clcb->reason;
+    bdcpy(cb_data.close.remote_bda, p_clcb->bda);
+
+    if (p_clcb->status == BTA_GATT_OK)
+    {
+        /* if the srcb is no longer needed, reset the state */
+        if ( -- p_clcb->p_srcb->num_clcb == 0)
+        {
+            APPL_TRACE_DEBUG0("Update srcb connection status");
+            p_clcb->p_srcb->connected = FALSE;
+            p_clcb->p_srcb->state = BTA_GATTC_SERV_IDLE;
+        }
+
+        bta_gattc_clcb_dealloc(p_clcb);
+    }
+
+    ( * p_cback)(BTA_GATTC_CLOSE_EVT,   (tBTA_GATTC *)&cb_data);
+
+    if (-- p_clreg->num_clcb == 0 && p_clreg->dereg_pending)
+    {
+        bta_gattc_deregister_cmpl(p_clreg, p_clreg->client_if);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_reset_discover_st
+**
+** Description      when a SRCB finished discovery, tell all related clcb.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_reset_discover_st(tBTA_GATTC_SERV *p_srcb)
+{
+    tBTA_GATTC_CB   *p_cb = &bta_gattc_cb;
+    UINT8 i;
+
+    for (i = 0; i < BTA_GATTC_CLCB_MAX; i ++)
+    {
+        if (p_cb->clcb[i].p_srcb == p_srcb)
+        {
+            bta_gattc_sm_execute(&p_cb->clcb[i], BTA_GATTC_DISCOVER_CMPL_EVT, NULL);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_set_discover_st
+**
+** Description      when a SRCB start discovery, tell all related clcb and set
+**                  the state.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_set_discover_st(tBTA_GATTC_SERV *p_srcb)
+{
+    tBTA_GATTC_CB   *p_cb = &bta_gattc_cb;
+    UINT8   i;
+
+#if BLE_INCLUDED == TRUE
+    L2CA_EnableUpdateBleConnParams(p_srcb->server_bda, FALSE);
+#endif
+    for (i = 0; i < BTA_GATTC_CLCB_MAX; i ++)
+    {
+        if (p_cb->clcb[i].p_srcb == p_srcb)
+        {
+            p_cb->clcb[i].state = BTA_GATTC_DISCOVER_ST;
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_start_discover
+**
+** Description      Start a discovery on server.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_start_discover(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    /* pending operation, wait until it finishes */
+
+    APPL_TRACE_DEBUG1("bta_gattc_start_discover conn_id=%d",p_clcb->bta_conn_id);
+    if (p_clcb->p_q_cmd != NULL && p_clcb->auto_update == BTA_GATTC_NO_SCHEDULE &&
+        p_clcb->p_srcb->state == BTA_GATTC_SERV_IDLE)
+    {
+        p_clcb->auto_update = BTA_GATTC_DISC_WAITING;
+        p_clcb->state = BTA_GATTC_CONN_ST; /* set clcb state */
+    }
+    else /* no pending operation, start discovery right away */
+    {
+        p_clcb->auto_update = BTA_GATTC_NO_SCHEDULE;
+
+        if (p_clcb->p_srcb != NULL)
+        {
+            /* clear the service change mask */
+            p_clcb->p_srcb->srvc_hdl_chg = FALSE;
+            p_clcb->p_srcb->update_count = 0;
+
+            /* set all srcb related clcb into discovery ST */
+            bta_gattc_set_discover_st(p_clcb->p_srcb);
+
+            if ( bta_gattc_init_cache(p_clcb->p_srcb) ||
+                 bta_gattc_discover_pri_service(p_clcb->bta_conn_id, p_clcb->p_srcb, GATT_DISC_SRVC_ALL) != BTA_GATT_OK)
+            {
+                APPL_TRACE_ERROR0("discovery on server failed");
+                bta_gattc_reset_discover_st(p_clcb->p_srcb);
+            }
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("unknown device, can not start discovery");
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_disc_cmpl
+**
+** Description      discovery on server is finished
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_disc_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_DATA *p_q_cmd = p_clcb->p_q_cmd;
+    APPL_TRACE_DEBUG1("bta_gattc_disc_cmpl conn_id=%d",p_clcb->bta_conn_id);
+
+#if BLE_INCLUDED == TRUE
+    L2CA_EnableUpdateBleConnParams(p_clcb->p_srcb->server_bda, TRUE);
+#endif
+    p_clcb->p_srcb->state = BTA_GATTC_SERV_IDLE;
+
+    /* release pending attribute list buffer */
+    utl_freebuf((void **)&p_clcb->p_srcb->p_srvc_list);
+
+    /* get any queued command to proceed */
+    if (p_q_cmd != NULL)
+    {
+        p_clcb->p_q_cmd = NULL;
+
+        bta_gattc_sm_execute(p_clcb, p_q_cmd->hdr.event, p_q_cmd);
+
+        utl_freebuf((void **)&p_q_cmd);
+
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_read
+**
+** Description      Read an attribute
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_read(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    UINT16 handle = 0;
+    tGATT_READ_PARAM    read_param;
+    tBTA_GATTC_OP_CMPL  op_cmpl;
+
+    memset (&read_param, 0 ,sizeof(tGATT_READ_PARAM));
+    memset (&op_cmpl, 0 ,sizeof(tBTA_GATTC_OP_CMPL));
+
+    if (bta_gattc_enqueue(p_clcb, p_data))
+    {
+        if ((handle = bta_gattc_id2handle(p_clcb->p_srcb,
+                                          &p_data->api_read.srvc_id,
+                                          &p_data->api_read.char_id,
+                                          p_data->api_read.descr_type)) == 0)
+        {
+            op_cmpl.status = BTA_GATT_ERROR;
+        }
+        else
+        {
+            read_param.by_handle.handle = handle;
+            read_param.by_handle.auth_req = p_data->api_read.auth_req;
+
+            op_cmpl.status = GATTC_Read(p_clcb->bta_conn_id, GATT_READ_BY_HANDLE, &read_param);
+        }
+
+        /* read fail */
+        if (op_cmpl.status != BTA_GATT_OK)
+        {
+            op_cmpl.op_code = GATTC_OPTYPE_READ;
+            op_cmpl.p_cmpl = NULL;
+
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_OP_CMPL_EVT, (tBTA_GATTC_DATA *)&op_cmpl);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_read_multi
+**
+** Description      read multiple
+**
+** Returns          None.
+*********************************************************************************/
+void bta_gattc_read_multi(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    UINT16              i, handle;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+    tGATT_READ_PARAM    read_param;
+    tBTA_GATTC_OP_CMPL  op_cmpl;
+    tBTA_GATTC_ATTR_ID  *p_id;
+    tBT_UUID            dummy_uuid;
+
+    if (bta_gattc_enqueue(p_clcb, p_data))
+    {
+        memset(&dummy_uuid, 0, sizeof(tBT_UUID));
+        memset(&read_param, 0, sizeof(tGATT_READ_PARAM));
+
+        p_id = p_data->api_read_multi.p_id_list;
+
+        for (i = 0; i < p_data->api_read_multi.num_attr && p_id; i ++, p_id ++)
+        {
+            handle = 0;
+
+            if (p_id->id_type == BTA_GATT_TYPE_CHAR)
+            {
+                handle = bta_gattc_id2handle(p_clcb->p_srcb,
+                                     &p_id->id_value.char_id.srvc_id,
+                                     &p_id->id_value.char_id.char_id,
+                                     dummy_uuid);
+            }
+            else if (p_id->id_type == BTA_GATT_TYPE_CHAR_DESCR)
+            {
+                handle = bta_gattc_id2handle(p_clcb->p_srcb,
+                                     &p_id->id_value.char_descr_id.char_id.srvc_id,
+                                     &p_id->id_value.char_descr_id.char_id.char_id,
+                                     p_id->id_value.char_descr_id.descr_type);
+            }
+            else
+            {
+                APPL_TRACE_ERROR1("invalud ID type: %d", p_id->id_type);
+            }
+
+            if (handle == 0)
+            {
+                status = BTA_GATT_ERROR;
+                break;
+            }
+        }
+        if (status == BTA_GATT_OK)
+        {
+            read_param.read_multiple.num_handles = p_data->api_read_multi.num_attr;
+            read_param.read_multiple.auth_req = p_data->api_read_multi.auth_req;
+
+            status = GATTC_Read(p_clcb->bta_conn_id, GATT_READ_MULTIPLE, &read_param);
+        }
+
+        /* read fail */
+        if (status != BTA_GATT_OK)
+        {
+            memset(&op_cmpl, 0, sizeof(tBTA_GATTC_OP_CMPL));
+
+            op_cmpl.status  = status;
+            op_cmpl.op_code = GATTC_OPTYPE_READ;
+            op_cmpl.p_cmpl  = NULL;
+
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_OP_CMPL_EVT, (tBTA_GATTC_DATA *)&op_cmpl);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_write
+**
+** Description      Write an attribute
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_write(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    UINT16              handle = 0;
+    tGATT_VALUE         attr = {0};
+    tBTA_GATTC_OP_CMPL  op_cmpl;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+
+    if (bta_gattc_enqueue(p_clcb, p_data))
+    {
+        if ((handle = bta_gattc_id2handle(p_clcb->p_srcb,
+                                          &p_data->api_write.srvc_id,
+                                          &p_data->api_write.char_id,
+                                          p_data->api_write.descr_type)) == 0)
+        {
+            status = BTA_GATT_ERROR;
+        }
+        else
+        {
+            attr.handle= handle;
+            attr.offset = p_data->api_write.offset;
+            attr.len    = p_data->api_write.len;
+            attr.auth_req = p_data->api_write.auth_req;
+
+            if (p_data->api_write.p_value)
+                memcpy(attr.value, p_data->api_write.p_value, p_data->api_write.len);
+
+            status = GATTC_Write(p_clcb->bta_conn_id, p_data->api_write.write_type, &attr);
+        }
+
+        /* write fail */
+        if (status != BTA_GATT_OK)
+        {
+            memset(&op_cmpl, 0, sizeof(tBTA_GATTC_OP_CMPL));
+
+            op_cmpl.status  = status;
+            op_cmpl.op_code = GATTC_OPTYPE_WRITE;
+            op_cmpl.p_cmpl  = NULL;
+
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_OP_CMPL_EVT, (tBTA_GATTC_DATA *)&op_cmpl);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_execute
+**
+** Description      send execute write
+**
+** Returns          None.
+*********************************************************************************/
+void bta_gattc_execute(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_OP_CMPL  op_cmpl;
+    tBTA_GATT_STATUS    status;
+
+    if (bta_gattc_enqueue(p_clcb, p_data))
+    {
+        status = GATTC_ExecuteWrite(p_clcb->bta_conn_id, p_data->api_exec.is_execute);
+
+        if (status != BTA_GATT_OK)
+        {
+            memset(&op_cmpl, 0, sizeof(tBTA_GATTC_OP_CMPL));
+
+            op_cmpl.status  = status;
+            op_cmpl.op_code = GATTC_OPTYPE_EXE_WRITE;
+            op_cmpl.p_cmpl  = NULL;
+
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_OP_CMPL_EVT, (tBTA_GATTC_DATA *)&op_cmpl);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_confirm
+**
+** Description      send handle value confirmation
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_confirm(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    UINT16 handle;
+    tBT_UUID    null_uuid = {0};
+
+    if ((handle = bta_gattc_id2handle(p_clcb->p_srcb,
+                                      &p_data->api_confirm.srvc_id,
+                                      &p_data->api_confirm.char_id,
+                                      null_uuid)) == 0)
+    {
+        APPL_TRACE_ERROR0("Can not map service/char ID into valid handle");
+    }
+    else
+    {
+        if (GATTC_SendHandleValueConfirm(p_data->api_confirm.hdr.layer_specific, handle)
+            != GATT_SUCCESS)
+        {
+            APPL_TRACE_ERROR1("bta_gattc_confirm to handle [0x%04x] failed", handle);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_read_cmpl
+**
+** Description      read complete
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_read_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_OP_CMPL *p_data)
+{
+    UINT8               event;
+    tBTA_GATTC          cb_data;
+    tBTA_GATT_READ_VAL  read_value;
+
+    memset(&cb_data, 0, sizeof(tBTA_GATTC));
+    memset(&read_value, 0, sizeof(tBTA_GATT_READ_VAL));
+
+    cb_data.read.status     = p_data->status;
+
+    if (p_data->p_cmpl != NULL && p_data->status == BTA_GATT_OK)
+    {
+        if (bta_gattc_handle2id(p_clcb->p_srcb,
+                                p_data->p_cmpl->att_value.handle,
+                                &cb_data.read.srvc_id,
+                                &cb_data.read.char_id,
+                                &cb_data.read.descr_type) == FALSE)
+        {
+            cb_data.read.status = BTA_GATT_INTERNAL_ERROR;
+            APPL_TRACE_ERROR1("can not map to GATT ID. handle = 0x%04x", p_data->p_cmpl->att_value.handle);
+        }
+        else
+        {
+            cb_data.read.status = bta_gattc_pack_read_cb_data(p_clcb->p_srcb,
+                                                              cb_data.read.descr_type,
+                                                              &p_data->p_cmpl->att_value,
+                                                              &read_value);
+            cb_data.read.p_value = &read_value;
+        }
+    }
+    else
+    {
+        cb_data.read.srvc_id = p_clcb->p_q_cmd->api_read.srvc_id;
+        cb_data.read.char_id = p_clcb->p_q_cmd->api_read.char_id;
+        cb_data.read.descr_type = p_clcb->p_q_cmd->api_read.descr_type;
+    }
+
+    event = (p_clcb->p_q_cmd->api_read.descr_type.len == 0) ? BTA_GATTC_READ_CHAR_EVT: BTA_GATTC_READ_DESCR_EVT;
+    cb_data.read.conn_id = p_clcb->bta_conn_id;
+
+    utl_freebuf((void **)&p_clcb->p_q_cmd);
+    /* read complete, callback */
+    ( *p_clcb->p_rcb->p_cback)(event, (tBTA_GATTC *)&cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_write_cmpl
+**
+** Description      read complete
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_write_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_OP_CMPL *p_data)
+{
+    tBTA_GATTC      cb_data = {0};
+    UINT8          event;
+
+    cb_data.write.status     = p_data->status;
+
+    if (p_data->p_cmpl != NULL)
+    {
+        bta_gattc_handle2id(p_clcb->p_srcb, p_data->p_cmpl->handle,
+                            &cb_data.write.srvc_id, &cb_data.write.char_id,
+                            &cb_data.write.descr_type);
+    }
+    else
+    {
+        cb_data.write.srvc_id = p_clcb->p_q_cmd->api_write.srvc_id;
+        cb_data.write.char_id = p_clcb->p_q_cmd->api_write.char_id;
+        cb_data.write.descr_type = p_clcb->p_q_cmd->api_write.descr_type;
+    }
+
+    if (p_clcb->p_q_cmd->api_write.hdr.event == BTA_GATTC_API_WRITE_EVT &&
+        p_clcb->p_q_cmd->api_write.write_type == BTA_GATTC_WRITE_PREPARE)
+
+        event = BTA_GATTC_PREP_WRITE_EVT;
+
+    else if (p_clcb->p_q_cmd->api_write.descr_type.len == 0)
+
+        event = BTA_GATTC_WRITE_CHAR_EVT;
+
+    else
+        event = BTA_GATTC_WRITE_DESCR_EVT;
+
+    utl_freebuf((void **)&p_clcb->p_q_cmd);
+    cb_data.write.conn_id = p_clcb->bta_conn_id;
+    /* write complete, callback */
+    ( *p_clcb->p_rcb->p_cback)(event, (tBTA_GATTC *)&cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_exec_cmpl
+**
+** Description      execute write complete
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_exec_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_OP_CMPL *p_data)
+{
+    tBTA_GATTC          cb_data;
+
+    utl_freebuf((void **)&p_clcb->p_q_cmd);
+
+    p_clcb->status      = BTA_GATT_OK;
+
+    /* execute complete, callback */
+    cb_data.exec_cmpl.conn_id = p_clcb->bta_conn_id;
+    cb_data.exec_cmpl.status = p_data->status;
+
+    ( *p_clcb->p_rcb->p_cback)(BTA_GATTC_EXEC_EVT,  &cb_data);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gattc_op_cmpl
+**
+** Description      operation completed.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void  bta_gattc_op_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    UINT8           op = (UINT8)p_data->op_cmpl.op_code;
+    UINT8           mapped_op = 0;
+
+    APPL_TRACE_DEBUG1("bta_gattc_op_cmpl op = %d", op);
+
+    if (op == GATTC_OPTYPE_INDICATION || op == GATTC_OPTYPE_NOTIFICATION)
+    {
+        APPL_TRACE_ERROR0("unexpected operation, ignored");
+    }
+    else if (op >= GATTC_OPTYPE_READ)
+    {
+        if (p_clcb->p_q_cmd == NULL)
+        {
+            APPL_TRACE_ERROR0("No pending command");
+            return;
+        }
+        if (p_clcb->p_q_cmd->hdr.event != bta_gattc_opcode_to_int_evt[op - GATTC_OPTYPE_READ])
+        {
+            mapped_op = p_clcb->p_q_cmd->hdr.event - BTA_GATTC_API_READ_EVT + GATTC_OPTYPE_READ;
+            if ( mapped_op > GATTC_OPTYPE_INDICATION)   mapped_op = 0;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+            APPL_TRACE_ERROR3("expect op:(%s :0x%04x), receive unexpected operation (%s).",
+                                bta_gattc_op_code_name[mapped_op] , p_clcb->p_q_cmd->hdr.event,
+                                bta_gattc_op_code_name[op]);
+#else
+            APPL_TRACE_ERROR3("expect op:(%u :0x%04x), receive unexpected operation (%u).",
+                                mapped_op , p_clcb->p_q_cmd->hdr.event, op);
+#endif
+            return;
+        }
+
+        /* service handle change void the response, discard it */
+        if (p_clcb->auto_update == BTA_GATTC_DISC_WAITING)
+        {
+            p_clcb->auto_update = BTA_GATTC_REQ_WAITING;
+            bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_DISCOVER_EVT, NULL);
+        }
+        else if (op == GATTC_OPTYPE_READ)
+            bta_gattc_read_cmpl(p_clcb, &p_data->op_cmpl);
+
+        else if (op == GATTC_OPTYPE_WRITE)
+            bta_gattc_write_cmpl(p_clcb, &p_data->op_cmpl);
+
+        else if (op == GATTC_OPTYPE_EXE_WRITE)
+            bta_gattc_exec_cmpl(p_clcb, &p_data->op_cmpl);
+        /*
+        else if (op == GATTC_OPTYPE_CONFIG) // API to be added
+        {
+        }
+       */
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_op_cmpl
+**
+** Description      operation completed.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void  bta_gattc_ignore_op_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    /* receive op complete when discovery is started, ignore the response,
+        and wait for discovery finish and resent */
+    APPL_TRACE_DEBUG1("bta_gattc_ignore_op_cmpl op = %d", p_data->hdr.layer_specific);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_search
+**
+** Description      start a search in the local server cache
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_search(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATT_STATUS    status = GATT_INTERNAL_ERROR;
+    tBTA_GATTC cb_data;
+    APPL_TRACE_DEBUG1("bta_gattc_search conn_id=%d",p_clcb->bta_conn_id);
+    if (p_clcb->p_srcb && p_clcb->p_srcb->p_srvc_cache)
+    {
+        status = BTA_GATT_OK;
+        /* search the local cache of a server device */
+        bta_gattc_search_service(p_clcb, p_data->api_search.srvc_uuid);
+    }
+    cb_data.search_cmpl.status  = status;
+    cb_data.search_cmpl.conn_id = p_clcb->bta_conn_id;
+
+    /* end of search or no server cache available */
+    ( *p_clcb->p_rcb->p_cback)(BTA_GATTC_SEARCH_CMPL_EVT,  &cb_data);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_q_cmd
+**
+** Description      enqueue a command into control block, usually because discovery
+**                  operation is busy.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_q_cmd(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    bta_gattc_enqueue(p_clcb, p_data);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_cache_open
+**
+** Description      open a NV cache for loading
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_cache_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    bta_gattc_set_discover_st(p_clcb->p_srcb);
+
+    APPL_TRACE_DEBUG1("bta_gattc_cache_open conn_id=%d",p_clcb->bta_conn_id);
+    bta_gattc_co_cache_open(p_clcb->p_srcb->server_bda, BTA_GATTC_CI_CACHE_OPEN_EVT,
+                            p_clcb->bta_conn_id, FALSE);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_start_load
+**
+** Description      start cache loading by sending callout open cache
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_ci_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    APPL_TRACE_DEBUG2("bta_gattc_ci_open conn_id=%d server state=%d" ,
+                      p_clcb->bta_conn_id, p_clcb->p_srcb->state);
+    if (p_clcb->p_srcb->state == BTA_GATTC_SERV_LOAD)
+    {
+        if (p_data->ci_open.status == BTA_GATT_OK)
+        {
+            p_clcb->p_srcb->attr_index = 0;
+            bta_gattc_co_cache_load(p_clcb->p_srcb->server_bda,
+                                    BTA_GATTC_CI_CACHE_LOAD_EVT,
+                                    p_clcb->p_srcb->attr_index,
+                                    p_clcb->bta_conn_id);
+        }
+        else
+        {
+            /* cache open failure, start discovery */
+            bta_gattc_start_discover(p_clcb, NULL);
+        }
+    }
+    if (p_clcb->p_srcb->state == BTA_GATTC_SERV_SAVE)
+    {
+        if (p_data->ci_open.status == BTA_GATT_OK)
+        {
+            if (!bta_gattc_cache_save(p_clcb->p_srcb, p_clcb->bta_conn_id))
+            {
+                p_data->ci_open.status = BTA_GATT_ERROR;
+            }
+        }
+        if (p_data->ci_open.status != BTA_GATT_OK)
+        {
+            p_clcb->p_srcb->attr_index = 0;
+            bta_gattc_co_cache_close(p_clcb->p_srcb->server_bda, p_clcb->bta_conn_id);
+            bta_gattc_reset_discover_st(p_clcb->p_srcb);
+
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_load
+**
+** Description      cache loading received.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_ci_load(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+
+    APPL_TRACE_DEBUG2("bta_gattc_ci_load conn_id=%d load status=%d" ,
+                      p_clcb->bta_conn_id, p_data->ci_load.status );
+    bta_gattc_co_cache_close(p_clcb->p_srcb->server_bda, 0);
+
+    if ((p_data->ci_load.status == BTA_GATT_OK ||
+         p_data->ci_load.status == BTA_GATT_MORE) &&
+        p_data->ci_load.num_attr > 0)
+    {
+        bta_gattc_rebuild_cache(p_clcb->p_srcb, p_data->ci_load.num_attr, p_data->ci_load.attr, p_clcb->p_srcb->attr_index);
+
+        if (p_data->ci_load.status == BTA_GATT_OK)
+        {
+            p_clcb->p_srcb->attr_index = 0;
+            bta_gattc_reset_discover_st(p_clcb->p_srcb);
+
+        }
+        else /* load more */
+        {
+            p_clcb->p_srcb->attr_index += p_data->ci_load.num_attr;
+
+            bta_gattc_co_cache_load(p_clcb->p_srcb->server_bda,
+                                    BTA_GATTC_CI_CACHE_LOAD_EVT,
+                                    p_clcb->p_srcb->attr_index,
+                                    p_clcb->bta_conn_id);
+        }
+    }
+    else
+    {
+        p_clcb->p_srcb->attr_index = 0;
+        /* cache open failure, start discovery */
+        bta_gattc_start_discover(p_clcb, NULL);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_load
+**
+** Description      cache loading received.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_ci_save(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    APPL_TRACE_DEBUG1("bta_gattc_ci_save conn_id=%d  " ,
+                      p_clcb->bta_conn_id   );
+
+    if (!bta_gattc_cache_save(p_clcb->p_srcb, p_clcb->bta_conn_id))
+    {
+        p_clcb->p_srcb->attr_index = 0;
+        bta_gattc_co_cache_close(p_clcb->p_srcb->server_bda, 0);
+        bta_gattc_reset_discover_st(p_clcb->p_srcb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_fail
+**
+** Description      report API call failure back to apps
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    if (p_clcb->status == BTA_GATT_OK)
+    {
+        APPL_TRACE_ERROR1("operation not supported at current state [%d]", p_clcb->state);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_conn_cback
+**                  bta_gattc_cmpl_cback
+**
+** Description      callback functions to GATT client stack.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_gattc_conn_cback(tGATT_IF gattc_if, BD_ADDR bda, UINT16 conn_id,
+                                 BOOLEAN connected, tGATT_DISCONN_REASON reason)
+{
+    BT_HDR          *p_buf;
+    tBTA_GATTC_CLCB *p_clcb = NULL;
+
+    APPL_TRACE_DEBUG4("bta_gattc_conn_cback: cif = %d connected = %d conn_id = %d reaosn = 0x%04x",
+                      gattc_if, connected, conn_id, reason);
+
+    if (connected)
+    {
+        /* outgoing connection : locate a logic channel */
+        if ((p_clcb = bta_gattc_find_clcb_by_cif(gattc_if, bda)) == NULL)
+        {
+
+#if BLE_INCLUDED == TRUE
+            /* for a background connection */
+            if (L2CA_GetBleConnRole(bda)== HCI_ROLE_MASTER &&
+                bta_gattc_check_bg_conn(gattc_if, bda))
+            {
+                /* allocate a new channel */
+                p_clcb = bta_gattc_clcb_alloc(gattc_if, bda);
+            }
+#endif
+        }
+        if (p_clcb != NULL)
+        {
+            p_clcb->bta_conn_id = conn_id;
+
+            if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+            {
+                p_buf->event = BTA_GATTC_INT_CONN_EVT;
+                p_buf->layer_specific = conn_id;
+
+                bta_sys_sendmsg(p_buf);
+            }
+        }
+    }
+    else
+    {
+        /* connection attempt timeout, send connection callback event */
+        if (reason == GATT_CONN_CANCEL )
+        {
+            p_clcb = bta_gattc_clcb_alloc(gattc_if, bda);
+            p_clcb->bta_conn_id = conn_id;
+        }
+        if ((p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id)) != NULL)
+        {
+            if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+            {
+                p_buf->event = BTA_GATTC_INT_DISCONN_EVT;
+                p_buf->layer_specific = conn_id;
+                p_clcb->reason        = reason;
+
+                bta_sys_sendmsg(p_buf);
+            }
+        }
+        else
+        {
+            APPL_TRACE_DEBUG1(" connection ID: [%d] not used by BTA", conn_id);
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_process_srvc_chg_ind
+**
+** Description      process service change indication.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_process_srvc_chg_ind(UINT16 conn_id,
+                                       tBTA_GATTC_RCB      *p_clrcb,
+                                       tBTA_GATTC_SERV     *p_srcb,
+                                       tBTA_GATTC_CLCB      *p_clcb,
+                                       tBTA_GATTC_NOTIFY    *p_notify,
+                                       UINT16 handle)
+{
+    tBT_UUID        gattp_uuid, srvc_chg_uuid;
+    BOOLEAN         processed = FALSE;
+    UINT8           i;
+
+    gattp_uuid.len = 2;
+    gattp_uuid.uu.uuid16 = UUID_SERVCLASS_GATT_SERVER;
+
+    srvc_chg_uuid.len = 2;
+    srvc_chg_uuid.uu.uuid16 = GATT_UUID_GATT_SRV_CHGD;
+
+    if (bta_gattc_uuid_compare(p_notify->char_id.srvc_id.id.uuid, gattp_uuid, TRUE) &&
+        bta_gattc_uuid_compare(p_notify->char_id.char_id.uuid, srvc_chg_uuid, TRUE))
+    {
+        processed = TRUE;
+        /* mark service handle change pending */
+        p_srcb->srvc_hdl_chg = TRUE;
+        /* clear up all notification/indication registration */
+        bta_gattc_clear_notif_registration(conn_id);
+        /* service change indication all received, do discovery update */
+        if ( ++ p_srcb->update_count == bta_gattc_num_reg_app())
+        {
+            /* not an opened connection; or connection busy */
+            /* search for first available clcb and start discovery */
+            if (p_clcb == NULL || (p_clcb && p_clcb->p_q_cmd != NULL))
+            {
+                for (i = 0 ; i < BTA_GATTC_CLCB_MAX; i ++)
+                {
+                    if (bta_gattc_cb.clcb[i].in_use &&
+                        bta_gattc_cb.clcb[i].p_srcb == p_srcb &&
+                        bta_gattc_cb.clcb[i].p_q_cmd == NULL)
+                    {
+                        p_clcb = &bta_gattc_cb.clcb[i];
+                        break;
+                    }
+                }
+            }
+            /* send confirmation here if this is an indication, it should always be */
+            GATTC_SendHandleValueConfirm(conn_id, handle);
+
+            /* if connection available, refresh cache by doing discovery now */
+            if (p_clcb != NULL)
+                bta_gattc_sm_execute(p_clcb, BTA_GATTC_INT_DISCOVER_EVT, NULL);
+        }
+        /* notify applicationf or service change */
+        if (p_clrcb->p_cback != NULL)
+        {
+            APPL_TRACE_ERROR0("bta_gattc_process_srvc_chg_ind 2");
+           (* p_clrcb->p_cback)(BTA_GATTC_SRVC_CHG_EVT, (tBTA_GATTC *)p_srcb->server_bda);
+        }
+
+    }
+
+    return processed;
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_proc_other_indication
+**
+** Description      process all non-service change indication/notification.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_proc_other_indication(tBTA_GATTC_CLCB *p_clcb, UINT8 op,
+                                     tGATT_CL_COMPLETE *p_data,
+                                     tBTA_GATTC_NOTIFY *p_notify)
+{
+    APPL_TRACE_DEBUG2("bta_gattc_proc_other_indication check \
+                       p_data->att_value.handle=%d p_data->handle=%d",
+                       p_data->att_value.handle, p_data->handle);
+    APPL_TRACE_DEBUG1("is_notify", p_notify->is_notify);
+
+    p_notify->is_notify = (op == GATTC_OPTYPE_INDICATION) ? FALSE : TRUE;
+    p_notify->len = p_data->att_value.len;
+    bdcpy(p_notify->bda, p_clcb->bda);
+    memcpy(p_notify->value, p_data->att_value.value, p_data->att_value.len);
+    p_notify->conn_id = p_clcb->bta_conn_id;
+
+    if (p_clcb->p_rcb->p_cback)
+        (*p_clcb->p_rcb->p_cback)(BTA_GATTC_NOTIF_EVT,  (tBTA_GATTC *)p_notify);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_process_indicate
+**
+** Description      process indication/notification.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_process_indicate(UINT16 conn_id, tGATTC_OPTYPE op, tGATT_CL_COMPLETE *p_data)
+{
+    UINT16              handle = p_data->att_value.handle;
+    tBTA_GATTC_CLCB     *p_clcb ;
+    tBTA_GATTC_RCB      *p_clrcb = NULL;
+    tBTA_GATTC_SERV     *p_srcb = NULL;
+    tBTA_GATTC_NOTIFY   notify;
+    BD_ADDR             remote_bda;
+    tBTA_GATTC_IF       gatt_if;
+
+    if (!GATT_GetConnectionInfor(conn_id, &gatt_if, remote_bda))
+    {
+        APPL_TRACE_ERROR0("indication/notif for unknown app");
+        return;
+    }
+
+    if ((p_clrcb = bta_gattc_cl_get_regcb(gatt_if)) == NULL)
+    {
+        APPL_TRACE_ERROR0("indication/notif for unregistered app");
+        return;
+    }
+
+    if ((p_srcb = bta_gattc_find_srcb(remote_bda)) == NULL)
+    {
+        APPL_TRACE_ERROR0("indication/notif for unknown device, ignore");
+        return;
+    }
+
+    p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id);
+
+    if (bta_gattc_handle2id(p_srcb, handle,
+                            &notify.char_id.srvc_id,
+                            &notify.char_id.char_id,
+                            &notify.descr_type))
+    {
+        /* if non-service change indication/notification, forward to application */
+        if (!bta_gattc_process_srvc_chg_ind(conn_id, p_clrcb, p_srcb, p_clcb, &notify, handle))
+        {
+            /* if app registered for the notification */
+            if (bta_gattc_check_notif_registry(p_clrcb, p_srcb, &notify))
+            {
+                /* connection not open yet */
+                if (p_clcb == NULL)
+                {
+                    if ((p_clcb = bta_gattc_clcb_alloc(gatt_if, remote_bda)) != NULL)
+                    {
+                        p_clcb->bta_conn_id = conn_id;
+
+                        /* send connection event */
+                        bta_gattc_send_open_cback(p_clrcb,
+                                                  BTA_GATT_OK,
+                                                  remote_bda,
+                                                  conn_id);
+                    }
+                    else
+                    {
+                        APPL_TRACE_ERROR0("No resources");
+                    }
+                }
+
+                if (p_clcb != NULL)
+                    bta_gattc_proc_other_indication(p_clcb, op, p_data, &notify);
+            }
+            /* no one intersted and need ack? */
+            else if (op == GATTC_OPTYPE_INDICATION)
+            {
+                APPL_TRACE_DEBUG0("no one interested, ack now");
+                GATTC_SendHandleValueConfirm(conn_id, handle);
+            }
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Indi/Notif for Unknown handle[0x%04x], can not find in local cache.", handle);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_cmpl_cback
+**
+** Description      client operation complete callback register with BTE GATT.
+**
+** Returns          None.
+**
+*******************************************************************************/
+static void  bta_gattc_cmpl_cback(UINT16 conn_id, tGATTC_OPTYPE op, tGATT_STATUS status,
+                                  tGATT_CL_COMPLETE *p_data)
+{
+    tBTA_GATTC_CLCB     *p_clcb ;
+    tBTA_GATTC_OP_CMPL  *p_buf;
+    UINT16              len = sizeof(tBTA_GATTC_OP_CMPL) + sizeof(tGATT_CL_COMPLETE);
+
+    APPL_TRACE_DEBUG3("bta_gattc_cmpl_cback: conn_id = %d op = %d status = %d",
+                      conn_id, op, status);
+
+    /* notification and indication processed right away */
+    if (op == GATTC_OPTYPE_NOTIFICATION || op == GATTC_OPTYPE_INDICATION)
+    {
+        bta_gattc_process_indicate(conn_id, op, p_data);
+        return;
+    }
+    /* for all other operation, not expected if w/o connection */
+    else if ((p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id)) == NULL)
+    {
+        APPL_TRACE_ERROR1("bta_gattc_cmpl_cback unknown conn_id =  %d, ignore data", conn_id);
+        return;
+    }
+
+
+    if ((p_buf = (tBTA_GATTC_OP_CMPL *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+        p_buf->hdr.event = BTA_GATTC_OP_CMPL_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->status = status;
+        p_buf->op_code = op;
+
+        if (p_data != NULL)
+        {
+            p_buf->p_cmpl = (tGATT_CL_COMPLETE *)(p_buf + 1);
+            memcpy(p_buf->p_cmpl, p_data, sizeof(tGATT_CL_COMPLETE));
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+
+    return;
+}
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gattc_api.c b/bta/gatt/bta_gattc_api.c
new file mode 100644
index 0000000..1cace7d
--- /dev/null
+++ b/bta/gatt/bta_gattc_api.c
@@ -0,0 +1,934 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for GATT module of BTA.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+#include "gki.h"
+#include "bta_sys.h"
+#include "bta_gatt_api.h"
+#include "bta_gattc_int.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_gatt_reg =
+{
+    bta_gattc_hdl_event,
+    NULL        /* need a disable functino to be called when BT is disabled */
+};
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_AppRegister
+**
+** Description      This function is called to register application callbacks
+**                    with BTA GATTC module.
+**
+** Parameters       p_app_uuid - applicaiton UUID
+**                  p_client_cb - pointer to the application callback function.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_AppRegister(tBT_UUID *p_app_uuid, tBTA_GATTC_CBACK *p_client_cb)
+{
+    tBTA_GATTC_API_REG  *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_GATTC, &bta_gatt_reg);
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_GATTC_API_REG *) GKI_getbuf(sizeof(tBTA_GATTC_API_REG))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_GATTC_API_REG_EVT;
+        if (p_app_uuid != NULL)
+            memcpy(&p_buf->app_uuid, p_app_uuid, sizeof(tBT_UUID));
+        p_buf->p_cback      = p_client_cb;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_AppDeregister
+**
+** Description      This function is called to deregister an application
+**                  from BTA GATTC module.
+**
+** Parameters       client_if - client interface identifier.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_AppDeregister(tBTA_GATTC_IF client_if)
+{
+    tBTA_GATTC_API_DEREG  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_DEREG *) GKI_getbuf(sizeof(tBTA_GATTC_API_DEREG))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTC_API_DEREG_EVT;
+        p_buf->client_if = client_if;
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_Open
+**
+** Description      Open a direct connection or add a background auto connection
+**                  bd address
+**
+** Parameters       client_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTC_Open(tBTA_GATTC_IF client_if, BD_ADDR remote_bda, BOOLEAN is_direct)
+{
+    tBTA_GATTC_API_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_OPEN *) GKI_getbuf(sizeof(tBTA_GATTC_API_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTC_API_OPEN_EVT;
+
+        p_buf->client_if = client_if;
+        p_buf->is_direct = is_direct;
+        memcpy(p_buf->remote_bda, remote_bda, BD_ADDR_LEN);
+
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_CancelOpen
+**
+** Description      Cancel a direct open connection or remove a background auto connection
+**                  bd address
+**
+** Parameters       client_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTC_CancelOpen(tBTA_GATTC_IF client_if, BD_ADDR remote_bda, BOOLEAN is_direct)
+{
+    tBTA_GATTC_API_CANCEL_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_CANCEL_OPEN *) GKI_getbuf(sizeof(tBTA_GATTC_API_CANCEL_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTC_API_CANCEL_OPEN_EVT;
+
+        p_buf->client_if = client_if;
+        p_buf->is_direct = is_direct;
+        memcpy(p_buf->remote_bda, remote_bda, BD_ADDR_LEN);
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_Close
+**
+** Description      Close a connection to a GATT server.
+**
+** Parameters       conn_id: connectino ID to be closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTC_Close(UINT16 conn_id)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_GATTC_API_CLOSE_EVT;
+
+        p_buf->layer_specific = conn_id;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ServiceSearchRequest
+**
+** Description      This function is called to request a GATT service discovery
+**                    on a GATT server. This function report service search result
+**                  by a callback event, and followed by a service search complete
+**                  event.
+**
+** Parameters       conn_id: connection ID.
+**                  p_srvc_uuid: a UUID of the service application is interested in.
+**                              If Null, discover for all services.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_ServiceSearchRequest (UINT16 conn_id, tBT_UUID *p_srvc_uuid)
+{
+    tBTA_GATTC_API_SEARCH  *p_buf;
+    UINT16  len = sizeof(tBTA_GATTC_API_SEARCH) + sizeof(tBT_UUID);
+
+    if ((p_buf = (tBTA_GATTC_API_SEARCH *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event = BTA_GATTC_API_SEARCH_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+
+        if (p_srvc_uuid)
+        {
+            memcpy(&p_buf->srvc_uuid, p_srvc_uuid, sizeof(tBT_UUID));
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstChar
+**
+** Description      This function is called to find the first charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_srvc_id: the service ID of which the characteristic is belonged to.
+**                  p_char_uuid_cond: Characteristic UUID, if NULL find the first available
+**                               characteristic.
+**                  p_char_result: output parameter which will store the GATT
+**                                  characteristic ID.
+**                  p_property: output parameter to carry the characteristic property.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetFirstChar (UINT16 conn_id, tBTA_GATT_SRVC_ID *p_srvc_id,
+                                          tBT_UUID *p_char_uuid_cond,
+                                          tBTA_GATTC_CHAR_ID *p_char_result,
+                                          tBTA_GATT_CHAR_PROP *p_property)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_srvc_id || !p_char_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    if ((status = bta_gattc_query_cache(conn_id, BTA_GATTC_ATTR_TYPE_CHAR, p_srvc_id, NULL,
+                                        p_char_uuid_cond, &p_char_result->char_id, p_property))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_char_result->srvc_id, p_srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+    }
+
+    return status;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextChar
+**
+** Description      This function is called to find the next charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_char_id: start the characteristic search from the next record
+**                           after the one identified by char_id.
+**                  p_char_uuid_cond: Characteristic UUID, if NULL find the first available
+**                               characteristic.
+**                  p_char_result: output parameter which will store the GATT
+**                                  characteristic ID.
+**                  p_property: output parameter to carry the characteristic property.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetNextChar (UINT16 conn_id,
+                                         tBTA_GATTC_CHAR_ID *p_start_char_id,
+                                         tBT_UUID           *p_char_uuid_cond,
+                                         tBTA_GATTC_CHAR_ID *p_char_result,
+                                         tBTA_GATT_CHAR_PROP    *p_property)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_start_char_id || !p_char_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    if ((status = bta_gattc_query_cache(conn_id, BTA_GATTC_ATTR_TYPE_CHAR,
+                                        &p_start_char_id->srvc_id,
+                                        &p_start_char_id->char_id,
+                                        p_char_uuid_cond,
+                                        &p_char_result->char_id,
+                                        p_property))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_char_result->srvc_id, &p_start_char_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstCharDescr
+**
+** Description      This function is called to find the first charatceristic descriptor of the
+**                  charatceristic on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_char_id: the characteristic ID of which the descriptor is belonged to.
+**                  p_descr_uuid_cond: Characteristic Descr UUID, if NULL find the first available
+**                               characteristic.
+**                  p_descr_result: output parameter which will store the GATT
+**                                  characteristic descriptor ID.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetFirstCharDescr (UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id,
+                                                tBT_UUID *p_descr_uuid_cond,
+                                                tBTA_GATTC_CHAR_DESCR_ID *p_descr_result)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_char_id || !p_descr_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    memset(p_descr_result, 0, sizeof(tBTA_GATTC_CHAR_DESCR_ID));
+
+    if ((status = bta_gattc_query_cache(conn_id,
+                                        BTA_GATTC_ATTR_TYPE_CHAR_DESCR,
+                                        &p_char_id->srvc_id,
+                                        &p_char_id->char_id,
+                                        p_descr_uuid_cond,
+                                        &p_descr_result->char_id.char_id,
+                                        NULL))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_descr_result->descr_type, &p_descr_result->char_id.char_id.uuid, sizeof(tBT_UUID));
+        memcpy(&p_descr_result->char_id, p_char_id, sizeof(tBTA_GATTC_CHAR_ID));
+    }
+
+    return status;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextCharDescr
+**
+** Description      This function is called to find the next charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_descr_id: start the characteristic search from the next record
+**                           after the one identified by p_start_descr_id.
+**                  p_descr_uuid_cond: Characteristic descriptor UUID, if NULL find
+**                               the first available characteristic descriptor.
+**                  p_descr_result: output parameter which will store the GATT
+**                                  characteristic descriptor ID.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetNextCharDescr (UINT16 conn_id,
+                                             tBTA_GATTC_CHAR_DESCR_ID *p_start_descr_id,
+                                             tBT_UUID           *p_descr_uuid_cond,
+                                             tBTA_GATTC_CHAR_DESCR_ID *p_descr_result)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_start_descr_id || !p_descr_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    memset(p_descr_result, 0, sizeof(tBTA_GATTC_CHAR_DESCR_ID));
+
+    if ((status = bta_gattc_query_cache(conn_id, BTA_GATTC_ATTR_TYPE_CHAR_DESCR,
+                                        &p_start_descr_id->char_id.srvc_id,
+                                        &p_start_descr_id->char_id.char_id,
+                                        p_descr_uuid_cond,
+                                        &p_descr_result->char_id.char_id,
+                                        (void *)&p_start_descr_id->descr_type))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_descr_result->descr_type, &p_descr_result->char_id.char_id.uuid, sizeof(tBT_UUID));
+        memcpy(&p_descr_result->char_id, p_start_descr_id, sizeof(tBTA_GATTC_CHAR_ID));
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstIncludedService
+**
+** Description      This function is called to find the first included service of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_srvc_id: the service ID of which the characteristic is belonged to.
+**                  p_uuid_cond: Characteristic UUID, if NULL find the first available
+**                               characteristic.
+**                  p_result: output parameter which will store the GATT ID
+**                              of the included service found.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetFirstIncludedService(UINT16 conn_id, tBTA_GATT_SRVC_ID *p_srvc_id,
+                                                    tBT_UUID *p_uuid_cond, tBTA_GATTC_INCL_SVC_ID *p_result)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_srvc_id || !p_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    if ((status = bta_gattc_query_cache(conn_id,
+                                        BTA_GATTC_ATTR_TYPE_INCL_SRVC,
+                                        p_srvc_id,
+                                        NULL,
+                                        p_uuid_cond,
+                                        &p_result->incl_svc_id.id,
+                                        (tBTA_GATT_CHAR_PROP *)&p_result->incl_svc_id.is_primary))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_result->srvc_id, p_srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextIncludedService
+**
+** Description      This function is called to find the next included service of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_id: start the search from the next record
+**                                  after the one identified by p_start_id.
+**                  p_uuid_cond: Included service UUID, if NULL find the first available
+**                               included service.
+**                  p_result: output parameter which will store the GATT ID
+**                              of the included service found.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS  BTA_GATTC_GetNextIncludedService(UINT16 conn_id,
+                                                   tBTA_GATTC_INCL_SVC_ID *p_start_id,
+                                                   tBT_UUID               *p_uuid_cond,
+                                                   tBTA_GATTC_INCL_SVC_ID *p_result)
+{
+    tBTA_GATT_STATUS    status;
+
+    if (!p_start_id || !p_result)
+        return BTA_GATT_ILLEGAL_PARAMETER;
+
+    if ((status = bta_gattc_query_cache(conn_id,
+                                        BTA_GATTC_ATTR_TYPE_INCL_SRVC,
+                                        &p_start_id->srvc_id,
+                                        &p_start_id->incl_svc_id.id,
+                                        p_uuid_cond,
+                                        &p_result->incl_svc_id.id,
+                                        (tBTA_GATT_CHAR_PROP *)&p_result->incl_svc_id.is_primary))
+        == BTA_GATT_OK)
+    {
+        memcpy(&p_result->srvc_id, &p_start_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadCharacteristic
+**
+** Description      This function is called to read a service's characteristics of
+**                    the given characteritisc ID.
+**
+** Parameters       conn_id - connectino ID.
+**                    p_char_id - characteritic ID to read.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_ReadCharacteristic(UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id,
+                                  tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_READ  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_READ *) GKI_getbuf(sizeof(tBTA_GATTC_API_READ))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_READ));
+
+        p_buf->hdr.event = BTA_GATTC_API_READ_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        memcpy(&p_buf->srvc_id, &p_char_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_char_id->char_id, sizeof(tBTA_GATT_ID));
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadCharDescr
+**
+** Description      This function is called to read a characteristics descriptor.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_descr_id - characteritic descriptor ID to read.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_ReadCharDescr (UINT16 conn_id,
+                              tBTA_GATTC_CHAR_DESCR_ID  *p_descr_id,
+                              tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_READ  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_READ *) GKI_getbuf(sizeof(tBTA_GATTC_API_READ))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_READ));
+
+        p_buf->hdr.event = BTA_GATTC_API_READ_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        memcpy(&p_buf->srvc_id, &p_descr_id->char_id.srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_descr_id->char_id.char_id, sizeof(tBTA_GATT_ID));
+        memcpy(&p_buf->descr_type, &p_descr_id->descr_type, sizeof(tBT_UUID));
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadMultiple
+**
+** Description      This function is called to read multiple characteristic or
+**                  characteristic descriptors.
+**
+** Parameters       conn_id - connectino ID.
+**                    p_read_multi - pointer to the read multiple parameter.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_ReadMultiple(UINT16 conn_id, tBTA_GATTC_MULTI *p_read_multi,
+                            tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_READ_MULTI  *p_buf;
+    tBTA_GATTC_ATTR_ID          *p_value;
+    UINT16      len = (UINT16)(sizeof(tBTA_GATTC_API_READ_MULTI) +
+                               p_read_multi->num_attr * sizeof(tBTA_GATTC_ATTR_ID));
+    UINT8       i;
+
+    if ((p_buf = (tBTA_GATTC_API_READ_MULTI *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event = BTA_GATTC_API_READ_MULTI_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        p_buf->num_attr = p_read_multi->num_attr;
+
+        if (p_buf->num_attr > 0)
+        {
+            p_buf->p_id_list = p_value = (tBTA_GATTC_ATTR_ID *)(p_buf + 1);
+
+            for (i = 0; i < p_buf->num_attr; i ++, p_value ++)
+            {
+                memcpy(p_value, &p_read_multi->id_list[i], sizeof(tBTA_GATTC_ATTR_ID));
+            }
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_WriteCharValue
+**
+** Description      This function is called to write characteristic value.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - characteristic ID to write.
+**                    write_type - type of write.
+**                  len: length of the data to be written.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_WriteCharValue ( UINT16 conn_id,
+                                tBTA_GATTC_CHAR_ID *p_char_id,
+                                tBTA_GATTC_WRITE_TYPE  write_type,
+                                UINT16 len,
+                                UINT8 *p_value,
+                                tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_WRITE  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_WRITE *) GKI_getbuf((UINT16)(sizeof(tBTA_GATTC_API_WRITE) + len))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_WRITE) + len);
+
+        p_buf->hdr.event = BTA_GATTC_API_WRITE_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        memcpy(&p_buf->srvc_id, &p_char_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_char_id->char_id, sizeof(tBTA_GATT_ID));
+
+        p_buf->write_type = write_type;
+        p_buf->len = len;
+
+        if (p_value && len > 0)
+        {
+            p_buf->p_value = (UINT8 *)(p_buf + 1);
+            memcpy(p_buf->p_value, p_value, len);
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_WriteCharDescr
+**
+** Description      This function is called to write characteristic descriptor value.
+**
+** Parameters       conn_id - connection ID
+**                    p_char_descr_id - characteristic descriptor ID to write.
+**                  write_type - write type.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_WriteCharDescr (UINT16 conn_id,
+                               tBTA_GATTC_CHAR_DESCR_ID *p_char_descr_id,
+                               tBTA_GATTC_WRITE_TYPE  write_type,
+                               tBTA_GATT_UNFMT      *p_data,
+                               tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_WRITE  *p_buf;
+    UINT16  len = sizeof(tBTA_GATTC_API_WRITE) + p_data->len;
+
+    if ((p_buf = (tBTA_GATTC_API_WRITE *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event = BTA_GATTC_API_WRITE_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        memcpy(&p_buf->srvc_id, &p_char_descr_id->char_id.srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_char_descr_id->char_id.char_id, sizeof(tBTA_GATT_ID));
+        memcpy(&p_buf->descr_type, &p_char_descr_id->descr_type, sizeof(tBT_UUID));
+        p_buf->write_type = write_type;
+
+        if (p_data && p_data->len != 0)
+        {
+            p_buf->p_value  = (UINT8 *)(p_buf + 1);
+            p_buf->len      = p_data->len;
+            /* pack the descr data */
+            memcpy(p_buf->p_value, p_data->p_value, p_data->len);
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_PrepareWrite
+**
+** Description      This function is called to prepare write a characteristic value.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - GATT characteritic ID of the service.
+**                  offset - offset of the write value.
+**                  len: length of the data to be written.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_PrepareWrite  (UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id,
+                              UINT16 offset, UINT16 len, UINT8 *p_value,
+                              tBTA_GATT_AUTH_REQ auth_req)
+{
+    tBTA_GATTC_API_WRITE  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_WRITE *) GKI_getbuf((UINT16)(sizeof(tBTA_GATTC_API_WRITE) + len))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_WRITE) + len);
+
+        p_buf->hdr.event = BTA_GATTC_API_WRITE_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->auth_req = auth_req;
+
+        memcpy(&p_buf->srvc_id, &p_char_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_char_id->char_id, sizeof(tBTA_GATT_ID));
+
+        p_buf->write_type = BTA_GATTC_WRITE_PREPARE;
+        p_buf->offset   = offset;
+        p_buf->len = len;
+
+        if (p_value && len > 0)
+        {
+            p_buf->p_value = (UINT8 *)(p_buf + 1);
+            memcpy(p_buf->p_value, p_value, len);
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ExecuteWrite
+**
+** Description      This function is called to execute write a prepare write sequence.
+**
+** Parameters       conn_id - connection ID.
+**                    is_execute - execute or cancel.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_ExecuteWrite  (UINT16 conn_id, BOOLEAN is_execute)
+{
+    tBTA_GATTC_API_EXEC  *p_buf;
+
+    if ((p_buf = (tBTA_GATTC_API_EXEC *) GKI_getbuf((UINT16)sizeof(tBTA_GATTC_API_EXEC))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_EXEC));
+
+        p_buf->hdr.event = BTA_GATTC_API_EXEC_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+
+        p_buf->is_execute = is_execute;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTC_SendIndConfirm
+**
+** Description      This function is called to send handle value confirmation.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - characteristic ID to confirm.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTC_SendIndConfirm (UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id)
+{
+    tBTA_GATTC_API_CONFIRM  *p_buf;
+
+    APPL_TRACE_API3("BTA_GATTC_SendIndConfirm conn_id=%d service uuid1=0x%x char uuid=0x%x",
+                    conn_id, p_char_id->srvc_id.id.uuid.uu.uuid16, p_char_id->char_id.uuid.uu.uuid16); //toto
+
+    if ((p_buf = (tBTA_GATTC_API_CONFIRM *) GKI_getbuf(sizeof(tBTA_GATTC_API_CONFIRM))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTC_API_CONFIRM));
+
+        p_buf->hdr.event = BTA_GATTC_API_CONFIRM_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+
+        memcpy(&p_buf->srvc_id, &p_char_id->srvc_id, sizeof(tBTA_GATT_SRVC_ID));
+        memcpy(&p_buf->char_id, &p_char_id->char_id, sizeof(tBTA_GATT_ID));
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_RegisterForNotifications
+**
+** Description      This function is called to register for notification of a service.
+**
+** Parameters       client_if - client interface.
+**                  bda - target GATT server.
+**                  p_char_id - pointer to GATT characteristic ID.
+**
+** Returns          OK if registration succeed, otherwise failed.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS BTA_GATTC_RegisterForNotifications (tBTA_GATTC_IF client_if,
+                                                     BD_ADDR bda,
+                                                     tBTA_GATTC_CHAR_ID *p_char_id)
+{
+    tBTA_GATTC_RCB      *p_clreg;
+    tBTA_GATT_STATUS    status = BTA_GATT_ILLEGAL_PARAMETER;
+    UINT8               i;
+
+    if (!p_char_id)
+    {
+        APPL_TRACE_ERROR0("deregistration failed, unknow char id");
+        return status;
+    }
+
+    /* lock other GKI task */
+    GKI_sched_lock();
+
+    if ((p_clreg = bta_gattc_cl_get_regcb(client_if)) != NULL)
+    {
+        for (i = 0; i < BTA_GATTC_NOTIF_REG_MAX; i ++)
+        {
+            if (!p_clreg->notif_reg[i].in_use)
+            {
+                memset(&p_clreg->notif_reg, 0, sizeof(tBTA_GATTC_NOTIF_REG));
+
+                p_clreg->notif_reg[i].in_use = TRUE;
+                memcpy(p_clreg->notif_reg[i].remote_bda, bda, BD_ADDR_LEN);
+                memcpy(&p_clreg->notif_reg[i].char_id, p_char_id, sizeof(tBTA_GATTC_CHAR_ID));
+
+                status = BTA_GATT_OK;
+                break;
+            }
+        }
+        if (i == BTA_GATTC_NOTIF_REG_MAX)
+        {
+            status = BTA_GATT_NO_RESOURCES;
+            APPL_TRACE_ERROR0("Max Notification Reached, registration failed.");
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Client_if: %d Not Registered", client_if);
+    }
+
+    GKI_sched_unlock();
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_DeregisterForNotifications
+**
+** Description      This function is called to de-register for notification of a service.
+**
+** Parameters       client_if - client interface.
+**                  bda - target GATT server.
+**                  p_char_id - pointer to GATT characteristic ID.
+**
+** Returns          OK if deregistration succeed, otherwise failed.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS BTA_GATTC_DeregisterForNotifications (tBTA_GATTC_IF client_if,
+                                                       BD_ADDR bda,
+                                                       tBTA_GATTC_CHAR_ID *p_char_id)
+{
+    tBTA_GATTC_RCB      *p_clreg;
+    tBTA_GATT_STATUS    status = BTA_GATT_ILLEGAL_PARAMETER;
+    UINT8               i;
+
+    if (!p_char_id)
+    {
+        APPL_TRACE_ERROR0("deregistration failed, unknow char id");
+        return status;
+    }
+
+    /* lock other GKI task */
+    GKI_sched_lock();
+
+    if ((p_clreg = bta_gattc_cl_get_regcb(client_if)) != NULL)
+    {
+        for (i = 0; i < BTA_GATTC_NOTIF_REG_MAX; i ++)
+        {
+            if (p_clreg->notif_reg[i].in_use &&
+                !memcmp(p_clreg->notif_reg[i].remote_bda, bda, BD_ADDR_LEN) &&
+                !memcmp(&p_clreg->notif_reg[i].char_id, p_char_id, sizeof(tBTA_GATTC_CHAR_ID)))
+            {
+                APPL_TRACE_DEBUG0("Deregistered.");
+
+                memset(&p_clreg->notif_reg[i], 0, sizeof(tBTA_GATTC_NOTIF_REG));
+                status = BTA_GATT_OK;
+                break;
+            }
+        }
+        if (i == BTA_GATTC_NOTIF_REG_MAX)
+        {
+            status = BTA_GATT_ERROR;
+
+            APPL_TRACE_ERROR0("registration not found");
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Client_if: %d Not Registered", client_if);
+    }
+
+    GKI_sched_unlock();
+
+    return status;
+}
+
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gattc_cache.c b/bta/gatt/bta_gattc_cache.c
new file mode 100644
index 0000000..3774df4
--- /dev/null
+++ b/bta/gatt/bta_gattc_cache.c
@@ -0,0 +1,1597 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT client discovery procedures and cache
+ *  related functions.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+#include "utl.h"
+#include "gki.h"
+#include "bta_sys.h"
+#include "sdp_api.h"
+#include "sdpdefs.h"
+#include "bta_gattc_int.h"
+#include "btm_api.h"
+
+static void bta_gattc_char_dscpt_disc_cmpl(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb);
+static tBTA_GATT_STATUS bta_gattc_sdp_service_disc(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb);
+
+#define BTA_GATT_SDP_DB_SIZE 750
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+static char *bta_gattc_attr_type[] =
+{
+    "I", /* Included Service */
+    "C", /* Characteristic */
+    "D" /* Characteristic Descriptor */
+};
+/* utility functions */
+
+/*******************************************************************************
+**
+** Function         bta_gattc_display_cache_server
+**
+** Description      debug function to display the server cache.
+**
+** Returns          none.
+**
+*******************************************************************************/
+static void bta_gattc_display_cache_server(tBTA_GATTC_CACHE *p_cache)
+{
+    UINT8 i = 0, j;
+    tBTA_GATTC_CACHE    *p_cur_srvc = p_cache;
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+
+    APPL_TRACE_ERROR0("<================Start Server Cache =============>");
+
+    while (p_cur_srvc)
+    {
+        APPL_TRACE_ERROR6("Service[%d]: handle[%d ~ %d] %s[0x%04x] inst[%d]",
+                          i, p_cur_srvc->s_handle, p_cur_srvc->e_handle,
+                          ((p_cur_srvc->service_uuid.id.uuid.len == 2) ? "uuid16" : "uuid128"),
+                          p_cur_srvc->service_uuid.id.uuid.uu.uuid16,
+                          p_cur_srvc->service_uuid.id.inst_id);
+        i ++;
+
+        p_attr = p_cur_srvc->p_attr;
+
+        for (j = 0; p_attr; j ++ )
+        {
+            APPL_TRACE_ERROR6("\t Attr[0x%04x] handle[%d] uuid[0x%04x] inst[%d] type[%s] prop[0x%1x]",
+                              j + 1, p_attr->attr_handle, p_attr->p_uuid->uuid16, p_attr->inst_id,
+                              bta_gattc_attr_type[p_attr->attr_type], p_attr->property);
+
+            p_attr = p_attr->p_next;
+        }
+        p_cur_srvc = p_cur_srvc->p_next;
+    }
+
+    APPL_TRACE_ERROR0("<================End Server Cache =============>");
+    APPL_TRACE_ERROR0(" ");
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_display_explore_record
+**
+** Description      debug function to display the exploration list
+**
+** Returns          none.
+**
+*******************************************************************************/
+static void bta_gattc_display_explore_record(tBTA_GATTC_ATTR_REC *p_rec, UINT8 num_rec)
+{
+    UINT8 i;
+    tBTA_GATTC_ATTR_REC *pp = p_rec;
+
+    APPL_TRACE_ERROR0("<================Start Explore Queue =============>");
+    for (i = 0; i < num_rec; i ++, pp ++)
+    {
+        APPL_TRACE_ERROR5("\t rec[%d] uuid[0x%04x] s_handle[%d] e_handle[%d] is_primary[%d]",
+                          i + 1, pp->uuid.uu.uuid16, pp->s_handle, pp->e_handle, pp->is_primary);
+    }
+    APPL_TRACE_ERROR0("<================ End Explore Queue =============>");
+    APPL_TRACE_ERROR0(" ");
+
+}
+#endif  /* BTA_GATT_DEBUG == TRUE */
+
+
+/*******************************************************************************
+**
+** Function         bta_gattc_alloc_cache_buf
+**
+** Description      Allocate a GKI buffer for database cache.
+**
+** Returns          status
+**
+*******************************************************************************/
+BT_HDR *bta_gattc_alloc_cache_buf(tBTA_GATTC_SERV *p_srvc_cb)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf(GATT_DB_POOL_ID)) == NULL)
+    {
+        APPL_TRACE_DEBUG0("No resources: GKI buffer allocation failed.");
+        utl_freebuf((void **)&p_srvc_cb->p_srvc_list);
+        p_srvc_cb->free_byte = 0;
+    }
+    else
+    {
+        memset(p_buf, 0, GKI_get_buf_size(p_buf));
+        p_srvc_cb->p_free = (UINT8 *) p_buf;
+        p_srvc_cb->free_byte = GKI_get_buf_size(p_buf);
+
+        /* link into buffer queue */
+        GKI_enqueue(&p_srvc_cb->cache_buffer, p_buf);
+    }
+#if BTA_GATT_DEBUG== TRUE
+    APPL_TRACE_DEBUG1("allocating new buffer: free byte = %d", p_srvc_cb->free_byte);
+#endif
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_init_cache
+**
+** Description      Initialize the database cache and discovery related resources.
+**
+** Returns          status
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_init_cache(tBTA_GATTC_SERV *p_srvc_cb)
+{
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+
+    while (p_srvc_cb->cache_buffer.p_first)
+        GKI_freebuf (GKI_dequeue (&p_srvc_cb->cache_buffer));
+
+    utl_freebuf((void **)&p_srvc_cb->p_srvc_list);
+
+    if ((p_srvc_cb->p_srvc_list = (tBTA_GATTC_ATTR_REC*)GKI_getbuf(BTA_GATTC_ATTR_LIST_SIZE)) == NULL)
+    {
+        APPL_TRACE_DEBUG0("No resources: GKI buffer allocation failed.");
+        status = GATT_NO_RESOURCES;
+    }
+    else
+    {
+        p_srvc_cb->total_srvc = 0;
+        p_srvc_cb->cur_srvc_idx =
+        p_srvc_cb->cur_char_idx =
+        p_srvc_cb->next_avail_idx = 0;
+
+        if (bta_gattc_alloc_cache_buf(p_srvc_cb) == NULL)
+        {
+            status = GATT_NO_RESOURCES;
+        }
+        else
+        {
+            p_srvc_cb->p_cur_srvc = p_srvc_cb->p_srvc_cache = NULL;
+        }
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_get_srvc_inst_id
+**
+** Description      get service instance number
+**
+** Returns          instance ID of the service.
+**
+*******************************************************************************/
+static UINT8 bta_gattc_get_srvc_inst_id(tBTA_GATTC_SERV *p_srvc_cb, tBT_UUID uuid)
+{
+    UINT8 i = 0, inst = 0;
+    tBTA_GATTC_ATTR_REC   *p_srvc_rec;
+
+    for (i = 0; i < p_srvc_cb->total_srvc; i ++)
+    /*
+    for (; i < p_srvc_cb->cur_srvc_idx; i ++)*/
+    {
+        p_srvc_rec = p_srvc_cb->p_srvc_list + i;
+
+        if (bta_gattc_uuid_compare(p_srvc_rec->uuid, uuid, TRUE))
+            inst ++;
+    }
+    return inst ;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_get_char_inst_id
+**
+** Description      get characteristic instance number
+**
+** Returns          characteristic instance ID.
+**
+*******************************************************************************/
+static UINT8 bta_gattc_get_char_inst_id(tBTA_GATTC_CACHE *p_service_cache, tBT_UUID uuid)
+{
+    UINT8 inst = 0;
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+    tBT_UUID    attr_uuid;
+
+    p_attr = p_service_cache->p_attr;
+
+    while (p_attr)
+    {
+        bta_gattc_pack_attr_uuid(p_attr, &attr_uuid);
+
+        if (bta_gattc_uuid_compare(attr_uuid, uuid, TRUE))
+            inst ++;
+
+        p_attr = p_attr->p_next;
+    }
+    return inst ;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_add_srvc_to_cache
+**
+** Description      Add a service into database cache.
+**
+** Returns          status
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_add_srvc_to_cache(tBTA_GATTC_SERV *p_srvc_cb,
+                                                    UINT16 s_handle, UINT16 e_handle,
+                                                    tBT_UUID *p_uuid,
+                                                    BOOLEAN is_primary, UINT8 srvc_inst)
+{
+    tBTA_GATTC_CACHE    *p_new_srvc = NULL;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("Add a service into Service");
+    APPL_TRACE_DEBUG2("free byte = %d,  req %d bytes.", p_srvc_cb->free_byte, sizeof(tBTA_GATTC_CACHE))
+#endif
+
+    if (p_srvc_cb->free_byte < sizeof(tBTA_GATTC_CACHE))
+    {
+        if (bta_gattc_alloc_cache_buf(p_srvc_cb) == NULL)
+            return GATT_NO_RESOURCES;
+    }
+
+    p_new_srvc = (tBTA_GATTC_CACHE *)p_srvc_cb->p_free;
+    /* update service information */
+    p_new_srvc->s_handle = s_handle;
+    p_new_srvc->e_handle = e_handle;
+    p_new_srvc->service_uuid.is_primary = is_primary;
+    memcpy(&p_new_srvc->service_uuid.id.uuid, p_uuid, sizeof(tBT_UUID));
+    p_new_srvc->service_uuid.id.inst_id = srvc_inst;
+    p_new_srvc->p_next  = NULL;
+
+    if (p_srvc_cb->p_cur_srvc != NULL)
+        p_srvc_cb->p_cur_srvc->p_next = p_new_srvc;
+    p_srvc_cb->p_cur_srvc = p_new_srvc;
+
+    /* first service */
+    if (p_srvc_cb->p_srvc_cache == NULL)
+        p_srvc_cb->p_srvc_cache = p_new_srvc;
+
+    /* update buffer managament info */
+    p_srvc_cb->p_free += sizeof(tBTA_GATTC_CACHE);
+    p_srvc_cb->free_byte -= sizeof(tBTA_GATTC_CACHE);
+
+
+#if 0
+//#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    bta_gattc_display_cache_server(p_srvc_cb->p_srvc_cache);
+#endif
+    return status;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_add_attr_to_cache
+**
+** Description      Add an attribute into database cache buffer.
+**
+** Returns          status
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_add_attr_to_cache(tBTA_GATTC_SERV *p_srvc_cb,
+                                                    UINT16 handle,
+                                                    tBT_UUID *p_uuid,
+                                                    UINT8 property,
+                                                    tBTA_GATTC_ATTR_TYPE type)
+{
+    tBTA_GATTC_CACHE_ATTR *p_attr;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+    UINT16  len = sizeof(tBTA_GATTC_CACHE_ATTR) + p_uuid->len;
+    UINT8   *pp;
+
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("bta_gattc_add_attr_to_cache: Add a [%s] into Service", bta_gattc_attr_type[type]);
+    APPL_TRACE_DEBUG4("handle=%d uuid16=0x%x property=0x%x type=%d", handle, p_uuid->uu.uuid16, property, type);
+    APPL_TRACE_DEBUG2("free byte = %d,  req %d bytes.", p_srvc_cb->free_byte, len);
+#endif
+
+    if (p_srvc_cb->free_byte < len)
+    {
+        if (bta_gattc_alloc_cache_buf(p_srvc_cb) == NULL)
+            return GATT_NO_RESOURCES;
+    }
+
+    p_attr = (tBTA_GATTC_CACHE_ATTR *)p_srvc_cb->p_free;
+
+    p_attr->attr_handle = handle;
+    p_attr->attr_type   = type;
+    p_attr->property    = property;
+    p_attr->uuid_len    = p_uuid->len;
+    p_attr->p_uuid      = (tBTA_GATTC_UUID *)(p_attr + 1);
+    p_attr->p_next      = NULL;
+
+    pp = (UINT8 *)p_attr->p_uuid;
+
+    if (p_uuid->len == LEN_UUID_16)
+    {
+        UINT16_TO_STREAM(pp, p_uuid->uu.uuid16);
+    }
+    else if (p_uuid->len == LEN_UUID_128)
+    {
+        memcpy(pp, p_uuid->uu.uuid128, LEN_UUID_128);
+    }
+
+    if (type == BTA_GATTC_ATTR_TYPE_CHAR)
+        p_attr->inst_id = bta_gattc_get_char_inst_id(p_srvc_cb->p_cur_srvc, *p_uuid);
+    /* else: char descriptor, no instance ID needed */
+    else /* TODO: --->> temp treat included service same as char descriptor */
+        p_attr->inst_id = 0;
+
+    /* update service information */
+    p_srvc_cb->p_free += len;
+    p_srvc_cb->free_byte -= len;
+
+    /* first attribute within the service, update the attribute pointer */
+    if (p_srvc_cb->p_cur_srvc->p_attr == NULL)
+    {
+        p_srvc_cb->p_cur_srvc->p_attr = p_attr;
+    }
+    if (p_srvc_cb->p_cur_srvc->p_last_attr != NULL)
+        p_srvc_cb->p_cur_srvc->p_last_attr->p_next = p_attr;
+
+    p_srvc_cb->p_cur_srvc->p_last_attr = p_attr;
+
+#if 0
+//#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    bta_gattc_display_cache_server(p_srvc_cb->p_srvc_cache);
+#endif
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_get_disc_range
+**
+** Description      get discovery stating and ending handle range.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_get_disc_range(tBTA_GATTC_SERV *p_srvc_cb, UINT16 *p_s_hdl, UINT16 *p_e_hdl, BOOLEAN is_srvc)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = NULL;
+
+    if (is_srvc)
+    {
+        p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->cur_srvc_idx;
+        *p_s_hdl = p_rec->s_handle;
+    }
+    else
+    {
+        p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->cur_char_idx;
+        *p_s_hdl = p_rec->s_handle + 1;
+    }
+
+    *p_e_hdl = p_rec->e_handle;
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    APPL_TRACE_DEBUG2("discover range [%d ~ %d]",p_rec->s_handle, p_rec->e_handle);
+#endif
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_discover_pri_service
+**
+** Description      Start primary service discovery
+**
+** Returns          status of the operation.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_discover_pri_service(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb, UINT8 disc_type)
+{
+#if (BLE_INCLUDED == TRUE && (defined BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE))
+    tBT_DEVICE_TYPE dev_type;
+    tBLE_ADDR_TYPE  addr_type;
+
+    BTM_ReadDevInfo(p_server_cb->server_bda, &dev_type, &addr_type);
+    if (dev_type == BT_DEVICE_TYPE_BLE)
+        return bta_gattc_discover_procedure(conn_id, p_server_cb, disc_type);
+    else
+        return bta_gattc_sdp_service_disc(conn_id, p_server_cb);
+#endif
+    return BTA_GATT_ERROR;
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_discover_procedure
+**
+** Description      Start a particular type of discovery procedure on server.
+**
+** Returns          status of the operation.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_discover_procedure(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb, UINT8 disc_type)
+{
+    tGATT_DISC_PARAM param;
+    BOOLEAN is_service = TRUE;
+
+    memset(&param, 0, sizeof(tGATT_DISC_PARAM));
+
+    if (disc_type == GATT_DISC_SRVC_ALL || disc_type == GATT_DISC_SRVC_BY_UUID)
+    {
+        param.s_handle = 1;
+        param.e_handle = 0xFFFF;
+    }
+    else
+    {
+        if (disc_type == GATT_DISC_CHAR_DSCPT)
+            is_service = FALSE;
+
+        bta_gattc_get_disc_range(p_server_cb, &param.s_handle, &param.e_handle, is_service);
+
+        if (param.s_handle > param.e_handle)
+        {
+            APPL_TRACE_ERROR2("discover range invalid: [0x%04x ~ 0x%04x]", param.s_handle, param.e_handle);
+
+            return GATT_ERROR;
+        }
+    }
+    return GATTC_Discover (conn_id, disc_type, &param);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_start_disc_include_srvc
+**
+** Description      Start discovery for included service
+**
+** Returns          status of the operation.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_start_disc_include_srvc(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    APPL_TRACE_DEBUG0("starting discovery included service");
+
+    return bta_gattc_discover_procedure(conn_id, p_srvc_cb, GATT_DISC_INC_SRVC);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_start_disc_char
+**
+** Description      Start discovery for characteristic
+**
+** Returns          status of the operation.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_start_disc_char(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    p_srvc_cb->total_char = 0;
+
+    APPL_TRACE_DEBUG0("starting discover characteristics");
+
+    return bta_gattc_discover_procedure(conn_id, p_srvc_cb, GATT_DISC_CHAR);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_start_disc_char_dscp
+**
+** Description      Start discovery for characteristic descriptor
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gattc_start_disc_char_dscp(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    APPL_TRACE_DEBUG0("starting discover characteristics descriptor");
+
+    if (bta_gattc_discover_procedure(conn_id, p_srvc_cb, GATT_DISC_CHAR_DSCPT) != 0)
+        bta_gattc_char_dscpt_disc_cmpl(conn_id, p_srvc_cb);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_explore_srvc
+**
+** Description      process the service discovery complete event
+**
+** Returns          status
+**
+*******************************************************************************/
+static void bta_gattc_explore_srvc(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->cur_srvc_idx;
+    tBTA_GATTC_CLCB *p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id);
+
+    APPL_TRACE_DEBUG1("Start service discovery: srvc_idx = %d", p_srvc_cb->cur_srvc_idx);
+
+    p_srvc_cb->cur_char_idx = p_srvc_cb->next_avail_idx = p_srvc_cb->total_srvc;
+
+    if (p_clcb == NULL)
+    {
+        APPL_TRACE_ERROR0("unknown connection ID");
+        return;
+    }
+    /* start expore a service if there is service not been explored */
+    if (p_srvc_cb->cur_srvc_idx < p_srvc_cb->total_srvc)
+    {
+        /* add the first service into cache */
+        if (bta_gattc_add_srvc_to_cache (p_srvc_cb,
+                                         p_rec->s_handle,
+                                         p_rec->e_handle,
+                                         &p_rec->uuid,
+                                         p_rec->is_primary,
+                                         p_rec->srvc_inst_id) == 0)
+        {
+            /* start discovering included services */
+            bta_gattc_start_disc_include_srvc(conn_id, p_srvc_cb);
+            return;
+        }
+    }
+    /* no service found at all, the end of server discovery*/
+    APPL_TRACE_ERROR0("No More Service found");
+
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+    bta_gattc_display_cache_server(p_srvc_cb->p_srvc_cache);
+#endif
+    /* save cache to NV */
+    p_clcb->p_srcb->state = BTA_GATTC_SERV_SAVE;
+    bta_gattc_co_cache_open(p_srvc_cb->server_bda, BTA_GATTC_CI_CACHE_OPEN_EVT,
+                            conn_id, TRUE);
+    //bta_gattc_sm_execute(p_clcb, BTA_GATTC_DISCOVER_CMPL_EVT, NULL);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_incl_srvc_disc_cmpl
+**
+** Description      process the relationship discovery complete event
+**
+** Returns          status
+**
+*******************************************************************************/
+static void bta_gattc_incl_srvc_disc_cmpl(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    p_srvc_cb->cur_char_idx = p_srvc_cb->total_srvc;
+
+    /* start discoverying characteristic */
+    bta_gattc_start_disc_char(conn_id, p_srvc_cb);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_char_disc_cmpl
+**
+** Description      process the characteristic discovery complete event
+**
+** Returns          status
+**
+*******************************************************************************/
+static void bta_gattc_char_disc_cmpl(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->cur_char_idx;
+
+    APPL_TRACE_DEBUG1("Total %d Char found ", p_srvc_cb->total_char);
+
+    /* if there are characteristic needs to be explored */
+    if (p_srvc_cb->total_char > 0)
+    {
+        /* add the first characteristic into cache */
+        bta_gattc_add_attr_to_cache (p_srvc_cb,
+                                     p_rec->s_handle,
+                                     &p_rec->uuid,
+                                     p_rec->property,
+                                     BTA_GATTC_ATTR_TYPE_CHAR);
+
+        /* start discoverying characteristic descriptor , if failed, disc for next char*/
+        bta_gattc_start_disc_char_dscp(conn_id, p_srvc_cb);
+    }
+    else /* otherwise start with next service */
+    {
+        p_srvc_cb->cur_srvc_idx ++;
+
+        bta_gattc_explore_srvc (conn_id, p_srvc_cb);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_char_dscpt_disc_cmpl
+**
+** Description      process the char descriptor discovery complete event
+**
+** Returns          status
+**
+*******************************************************************************/
+static void bta_gattc_char_dscpt_disc_cmpl(UINT16 conn_id, tBTA_GATTC_SERV *p_srvc_cb)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = NULL;
+
+    if (-- p_srvc_cb->total_char > 0)
+    {
+        p_rec = p_srvc_cb->p_srvc_list + (++ p_srvc_cb->cur_char_idx);
+        /* add the next characteristic into cache */
+        bta_gattc_add_attr_to_cache (p_srvc_cb,
+                                     p_rec->s_handle,
+                                     &p_rec->uuid,
+                                     p_rec->property,
+                                     BTA_GATTC_ATTR_TYPE_CHAR);
+
+        /* start discoverying next characteristic for char descriptor */
+        bta_gattc_start_disc_char_dscp(conn_id, p_srvc_cb);
+    }
+    else
+    /* all characteristic has been explored, start with next service if any */
+    {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+        APPL_TRACE_ERROR0("all char has been explored");
+#endif
+        p_srvc_cb->cur_srvc_idx ++;
+        bta_gattc_explore_srvc (conn_id, p_srvc_cb);
+    }
+
+}
+static BOOLEAN bta_gattc_srvc_in_list(tBTA_GATTC_SERV *p_srvc_cb, UINT16 s_handle,
+                                      UINT16 e_handle, tBT_UUID uuid)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = NULL;
+    UINT8   i;
+    BOOLEAN exist_srvc = FALSE;
+
+    if (!GATT_HANDLE_IS_VALID(s_handle) || !GATT_HANDLE_IS_VALID(e_handle))
+    {
+        APPL_TRACE_ERROR2("invalid included service handle: [0x%04x ~ 0x%04x]", s_handle, e_handle);
+        exist_srvc = TRUE;
+    }
+    else
+    {
+        for (i = 0; i < p_srvc_cb->next_avail_idx; i ++)
+        {
+            p_rec = p_srvc_cb->p_srvc_list + i;
+
+            /* a new service should not have any overlap with other service handle range */
+            if (p_rec->s_handle == s_handle || p_rec->e_handle == e_handle)
+            {
+                exist_srvc = TRUE;
+                break;
+            }
+        }
+    }
+    return exist_srvc;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_add_srvc_to_list
+**
+** Description      Add a service into explore pending list
+**
+** Returns          status
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_add_srvc_to_list(tBTA_GATTC_SERV *p_srvc_cb,
+                                                   UINT16 s_handle, UINT16 e_handle,
+                                                   tBT_UUID uuid, BOOLEAN is_primary)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = NULL;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+
+    if (p_srvc_cb->next_avail_idx < BTA_GATTC_MAX_CACHE_CHAR)
+    {
+        p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->next_avail_idx;
+
+        p_srvc_cb->total_srvc ++;
+
+        APPL_TRACE_DEBUG2("bta_gattc_add_srvc_to_list handle = %d, service type = 0x%04x",
+            s_handle, uuid.uu.uuid16);
+
+        p_rec->s_handle     = s_handle;
+        p_rec->e_handle     = e_handle;
+        p_rec->is_primary   = is_primary;
+        p_rec->srvc_inst_id = bta_gattc_get_srvc_inst_id(p_srvc_cb, uuid);
+        memcpy(&p_rec->uuid, &uuid, sizeof(tBT_UUID));
+
+        p_srvc_cb->next_avail_idx ++;
+
+    }
+    else
+    {   /* allocate bigger buffer ?? */
+        status = GATT_DB_FULL;
+
+        APPL_TRACE_ERROR0("char not added, no resources");
+    }
+    return status;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_add_char_to_list
+**
+** Description      Add a characteristic into explore pending list
+**
+** Returns          status
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_add_char_to_list(tBTA_GATTC_SERV *p_srvc_cb,
+                                                   UINT16 decl_handle, UINT16 value_handle,
+                                                   tBT_UUID uuid, UINT8 property)
+{
+    tBTA_GATTC_ATTR_REC *p_rec = NULL;
+    tBTA_GATT_STATUS    status = BTA_GATT_OK;
+
+    if (p_srvc_cb->p_srvc_list == NULL)
+    {
+        APPL_TRACE_ERROR0("No service available, unexpected char discovery result");
+        status = BTA_GATT_INTERNAL_ERROR;
+    }
+    else if (p_srvc_cb->next_avail_idx < BTA_GATTC_MAX_CACHE_CHAR)
+    {
+
+        p_rec = p_srvc_cb->p_srvc_list + p_srvc_cb->next_avail_idx;
+
+        p_srvc_cb->total_char ++;
+
+        p_rec->s_handle = value_handle;
+        p_rec->property = property;
+        p_rec->e_handle = (p_srvc_cb->p_srvc_list + p_srvc_cb->cur_srvc_idx)->e_handle;
+        memcpy(&p_rec->uuid, &uuid, sizeof(tBT_UUID));
+
+        /* update the endind handle of pervious characteristic if available */
+        if (p_srvc_cb->total_char > 1)
+        {
+            p_rec -= 1;
+            p_rec->e_handle = decl_handle - 1;
+        }
+        p_srvc_cb->next_avail_idx ++;
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("char not added, no resources");
+        /* allocate bigger buffer ?? */
+        status = BTA_GATT_DB_FULL;
+    }
+    return status;
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_sdp_callback
+**
+** Description      Process the discovery result from sdp
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_sdp_callback (UINT16 sdp_status)
+{
+    tSDP_DISC_REC       *p_sdp_rec = NULL;
+    tBT_UUID            service_uuid;
+    tSDP_PROTOCOL_ELEM  pe;
+    UINT16              start_handle = 0, end_handle = 0;
+    tBTA_GATTC_SERV     *p_srvc_cb = bta_gattc_find_scb_by_cid(bta_gattc_cb.sdp_conn_id);
+
+    if(((sdp_status == SDP_SUCCESS) || (sdp_status == SDP_DB_FULL)) && p_srvc_cb != NULL)
+    {
+        do
+        {
+            /* find a service record, report it */
+            p_sdp_rec = SDP_FindServiceInDb(bta_gattc_cb.p_sdp_db,
+                                            0, p_sdp_rec);
+            if (p_sdp_rec)
+            {
+                if (SDP_FindServiceUUIDInRec(p_sdp_rec, &service_uuid))
+                {
+
+                    if (SDP_FindProtocolListElemInRec(p_sdp_rec, UUID_PROTOCOL_ATT, &pe))
+                    {
+                        start_handle    = (UINT16) pe.params[0];
+                        end_handle      = (UINT16) pe.params[1];
+
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                        APPL_TRACE_EVENT3("Found ATT service [0x%04x] handle[0x%04x ~ 0x%04x]",
+                                        service_uuid.uu.uuid16, start_handle, end_handle);
+#endif
+
+                        if (GATT_HANDLE_IS_VALID(start_handle) && GATT_HANDLE_IS_VALID(end_handle) &&
+                            p_srvc_cb != NULL)
+                        {
+                            /* discover services result, add services into a service list */
+                            bta_gattc_add_srvc_to_list(p_srvc_cb,
+                                                       start_handle,
+                                                       end_handle,
+                                                       service_uuid,
+                                                       TRUE);
+                        }
+                        else
+                        {
+                            APPL_TRACE_ERROR2("invalid start_handle = %d end_handle = %d", start_handle, end_handle);
+                        }
+                }
+
+
+                }
+            }
+        } while (p_sdp_rec);
+    }
+
+    if ( p_srvc_cb != NULL)
+        /* start discover primary service */
+        bta_gattc_explore_srvc(bta_gattc_cb.sdp_conn_id, p_srvc_cb);
+    else
+    {
+        APPL_TRACE_ERROR0("GATT service discovery is done on unknown connection");
+    }
+
+    GKI_freebuf(bta_gattc_cb.p_sdp_db);
+    bta_gattc_cb.p_sdp_db  = NULL;
+    bta_gattc_cb.sdp_conn_id = 0;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_sdp_service_disc
+**
+** Description      Start DSP Service Discovert
+**
+** Returns          void
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_sdp_service_disc(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb)
+{
+    tSDP_UUID       uuid;
+    UINT16          num_attrs = 2;
+    UINT16          attr_list[2];
+    tBTA_GATT_STATUS    status = BTA_GATT_ERROR;
+
+    memset (&uuid, 0, sizeof(tSDP_UUID));
+
+    uuid.len = LEN_UUID_16;
+    uuid.uu.uuid16 = UUID_PROTOCOL_ATT;
+
+     if((bta_gattc_cb.p_sdp_db = (tSDP_DISCOVERY_DB *)GKI_getbuf(BTA_GATT_SDP_DB_SIZE)) != NULL)
+    {
+        attr_list[0] = ATTR_ID_SERVICE_CLASS_ID_LIST;
+        attr_list[1] = ATTR_ID_PROTOCOL_DESC_LIST;
+
+        SDP_InitDiscoveryDb (bta_gattc_cb.p_sdp_db, BTA_GATT_SDP_DB_SIZE, 1, &uuid, num_attrs, attr_list);
+
+        if(!SDP_ServiceSearchAttributeRequest (p_server_cb->server_bda, bta_gattc_cb.p_sdp_db, &bta_gattc_sdp_callback))
+        {
+            GKI_freebuf(bta_gattc_cb.p_sdp_db);
+            bta_gattc_cb.p_sdp_db = NULL;
+        }
+        else
+        {
+            bta_gattc_cb.sdp_conn_id = conn_id;
+            status = BTA_GATT_OK;
+        }
+     }
+     return status;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_disc_res_cback
+**                  bta_gattc_disc_cmpl_cback
+**
+** Description      callback functions to GATT client stack.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_disc_res_cback (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_DISC_RES *p_data)
+{
+    tBTA_GATTC_SERV * p_srvc_cb = NULL;
+    BOOLEAN          pri_srvc;
+
+    p_srvc_cb = bta_gattc_find_scb_by_cid(conn_id);
+
+    if (p_srvc_cb != NULL)
+    {
+        switch (disc_type)
+        {
+            case GATT_DISC_SRVC_ALL:
+                /* discover services result, add services into a service list */
+                bta_gattc_add_srvc_to_list(p_srvc_cb,
+                                           p_data->handle,
+                                           p_data->value.group_value.e_handle,
+                                           p_data->value.group_value.service_type,
+                                           TRUE);
+
+                break;
+            case GATT_DISC_SRVC_BY_UUID:
+                bta_gattc_add_srvc_to_list(p_srvc_cb,
+                                           p_data->handle,
+                                           p_data->value.handle,
+                                           p_data->type,
+                                           TRUE);
+                break;
+
+            case GATT_DISC_INC_SRVC:
+                /* add included service into service list if it's secondary or it never showed up
+                   in the primary service search */
+                pri_srvc = bta_gattc_srvc_in_list(p_srvc_cb,
+                                                  p_data->value.incl_service.s_handle,
+                                                  p_data->value.incl_service.e_handle,
+                                                  p_data->value.incl_service.service_type);
+
+                if (!pri_srvc)
+                    bta_gattc_add_srvc_to_list(p_srvc_cb,
+                                               p_data->value.incl_service.s_handle,
+                                               p_data->value.incl_service.e_handle,
+                                               p_data->value.incl_service.service_type,
+                                               FALSE);
+                /* add into database */
+                bta_gattc_add_attr_to_cache(p_srvc_cb,
+                                            p_data->handle,
+                                            &p_data->value.incl_service.service_type,
+                                            pri_srvc,
+                                            BTA_GATTC_ATTR_TYPE_INCL_SRVC);
+                break;
+
+            case GATT_DISC_CHAR:
+                /* add char value into database */
+                bta_gattc_add_char_to_list(p_srvc_cb,
+                                           p_data->handle,
+                                           p_data->value.dclr_value.val_handle,
+                                           p_data->value.dclr_value.char_uuid,
+                                           p_data->value.dclr_value.char_prop);
+                break;
+
+            case GATT_DISC_CHAR_DSCPT:
+                bta_gattc_add_attr_to_cache(p_srvc_cb, p_data->handle, &p_data->type, 0, BTA_GATTC_ATTR_TYPE_CHAR_DESCR);
+                break;
+        }
+    }
+}
+void bta_gattc_disc_cmpl_cback (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status)
+{
+    tBTA_GATTC_SERV * p_srvc_cb;
+
+    p_srvc_cb = bta_gattc_find_scb_by_cid(conn_id);
+
+    if (p_srvc_cb != NULL)
+    {
+        switch (disc_type)
+        {
+            case GATT_DISC_SRVC_ALL:
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                bta_gattc_display_explore_record(p_srvc_cb->p_srvc_list, p_srvc_cb->next_avail_idx);
+#endif
+                bta_gattc_explore_srvc(conn_id, p_srvc_cb);
+                break;
+
+            case GATT_DISC_INC_SRVC:
+                bta_gattc_incl_srvc_disc_cmpl(conn_id, p_srvc_cb);
+
+                break;
+
+            case GATT_DISC_CHAR:
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                bta_gattc_display_explore_record(p_srvc_cb->p_srvc_list, p_srvc_cb->next_avail_idx);
+#endif
+                bta_gattc_char_disc_cmpl(conn_id, p_srvc_cb);
+                break;
+
+            case GATT_DISC_CHAR_DSCPT:
+                bta_gattc_char_dscpt_disc_cmpl(conn_id, p_srvc_cb);
+                break;
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_id2handle
+**
+** Description      map GATT ID to handle in a given cache.
+**
+** Returns          the handle mapped. 0 if not found.
+**
+*******************************************************************************/
+UINT16 bta_gattc_id2handle(tBTA_GATTC_SERV *p_srcb, tBTA_GATT_SRVC_ID *p_service_id,
+                           tBTA_GATT_ID *p_char_id, tBT_UUID descr_uuid)
+{
+    tBTA_GATTC_CACHE    *p_cache = p_srcb->p_srvc_cache;
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+    UINT8       j;
+    UINT16      handle = 0;
+    tBT_UUID    attr_uuid;
+    BOOLEAN     char_map = FALSE, done = FALSE;
+
+    while (p_cache && !done)
+    {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+        APPL_TRACE_DEBUG3("Service: handle[%d] uuid[0x%04x] inst[%d]",
+                          p_cache->s_handle, p_cache->service_uuid.id.uuid.uu.uuid16,
+                          p_cache->service_uuid.id.inst_id);
+#endif
+        p_attr = p_cache->p_attr;
+
+        if (bta_gattc_uuid_compare(p_service_id->id.uuid, p_cache->service_uuid.id.uuid, TRUE) &&
+            p_service_id->id.inst_id == p_cache->service_uuid.id.inst_id &&
+            p_cache->service_uuid.is_primary == p_service_id->is_primary)
+        {
+            for (j = 0; p_attr; j ++)
+            {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                APPL_TRACE_DEBUG5("\t Attr[0x%04x] handle[0x%04x] uuid[0x%04x] inst[%d] type[%d]",
+                                  j + 1, p_attr->attr_handle, p_attr->p_uuid->uuid16, p_attr->inst_id, p_attr->attr_type);
+#endif
+                bta_gattc_pack_attr_uuid(p_attr, &attr_uuid);
+
+                if (bta_gattc_uuid_compare(p_char_id->uuid, attr_uuid, TRUE) &&
+                    p_char_id->inst_id == p_attr->inst_id)
+                {
+                    if (descr_uuid.len == 0)
+                    {
+                        handle = p_attr->attr_handle;
+                        done = TRUE;
+                        break;
+                    }
+                    else
+                    {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                        APPL_TRACE_DEBUG0("found matching characteristic for the descriptor");
+#endif
+                        char_map = TRUE;
+                    }
+                }
+                else if (char_map == TRUE)
+                {
+                    if (p_attr->attr_type == BTA_GATTC_ATTR_TYPE_CHAR_DESCR)
+                    {
+
+                        if (bta_gattc_uuid_compare(descr_uuid, attr_uuid, TRUE))
+                        {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                            APPL_TRACE_DEBUG0("found descripotor!!");
+#endif
+                            handle = p_attr->attr_handle;
+                            done = TRUE;
+                            break;
+                        }
+                        else
+                        {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                            APPL_TRACE_DEBUG0("descriptor UUID not matching");
+#endif
+                        }
+                    }
+                    else /* another char */
+                    {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                        APPL_TRACE_DEBUG0("no matching descriptor found!! start of next characteristic");
+#endif
+                        char_map = FALSE;
+                        done = TRUE;
+                        break;
+                    }
+                }
+                p_attr = p_attr->p_next;
+            }
+        }
+        p_cache = p_cache->p_next;
+    }
+
+    return handle;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_handle2id
+**
+** Description      map a handle to GATT ID in a given cache.
+**
+** Returns          FALSE if map can not be found.
+**
+*******************************************************************************/
+
+BOOLEAN bta_gattc_handle2id(tBTA_GATTC_SERV *p_srcb, UINT16 handle, tBTA_GATT_SRVC_ID *p_service_id,
+                            tBTA_GATT_ID *p_char_id, tBT_UUID *p_descr_type)
+{
+    tBTA_GATTC_CACHE    *p_cache = p_srcb->p_srvc_cache;
+    tBTA_GATTC_CACHE_ATTR   *p_attr, *p_char = NULL;
+    UINT8       j;
+
+    memset(p_service_id, 0, sizeof(tBTA_GATT_SRVC_ID));
+    memset(p_char_id, 0, sizeof(tBTA_GATT_ID));
+    memset(p_descr_type, 0, sizeof(tBT_UUID));
+
+    while (p_cache)
+    {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+        APPL_TRACE_DEBUG3("Service: handle[%d] uuid[0x%04x] inst[%d]",
+                          p_cache->s_handle, p_cache->service_uuid.id.uuid.uu.uuid16,
+                          p_cache->service_uuid.id.inst_id);
+#endif
+        /* a service found */
+        if (p_cache->s_handle == handle)
+        {
+            memcpy(p_service_id, &p_cache->service_uuid, sizeof(tBTA_GATT_SRVC_ID));
+
+            return TRUE;
+        }
+        else /* start looking for attributes within the service */
+        {
+            p_attr = p_cache->p_attr;
+
+            for (j = 0; p_attr; j ++)
+            {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                APPL_TRACE_DEBUG5("\t Attr[0x%04x] handle[0x%04x] uuid[0x%04x] inst[%d] type[%d]",
+                                  j + 1, p_attr->attr_handle, p_attr->p_uuid->uuid16, p_attr->inst_id, p_attr->attr_type);
+#endif
+                if (p_attr->attr_type == BTA_GATTC_ATTR_TYPE_CHAR)
+                    p_char = p_attr;
+
+                if (handle == p_attr->attr_handle)
+                {
+                    memcpy(p_service_id, &p_cache->service_uuid, sizeof(tBTA_GATT_SRVC_ID));
+
+                    if (p_attr->attr_type == BTA_GATTC_ATTR_TYPE_CHAR_DESCR)
+                    {
+                        bta_gattc_pack_attr_uuid(p_attr, p_descr_type);
+
+                        if (p_char != NULL)
+                        {
+                            bta_gattc_pack_attr_uuid(p_char, &p_char_id->uuid);
+                            p_char_id->inst_id = p_char->inst_id;
+                        }
+                        else
+                        {
+                            APPL_TRACE_ERROR0("descriptor does not belong to any chracteristic, error");
+                        }
+                    }
+                    else
+                    /* is a characterisitc value or included service */
+                    {
+                        bta_gattc_pack_attr_uuid(p_attr, &p_char_id->uuid);
+                        p_char_id->inst_id =p_attr->inst_id;
+                    }
+                    return TRUE;
+                }
+                p_attr = p_attr->p_next;
+            }
+        }
+        p_cache = p_cache->p_next;
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_search_service
+**
+** Description      search local cache for matching service record.
+**
+** Returns          FALSE if map can not be found.
+**
+*******************************************************************************/
+void bta_gattc_search_service(tBTA_GATTC_CLCB *p_clcb, tBT_UUID uuid)
+{
+    tBTA_GATTC_SERV     *p_srcb = p_clcb->p_srcb;
+    tBTA_GATTC_CACHE    *p_cache = p_srcb->p_srvc_cache;
+    tBTA_GATTC          cb_data;
+
+    while (p_cache)
+    {
+        if (bta_gattc_uuid_compare(uuid, p_cache->service_uuid.id.uuid, FALSE))
+        {
+//#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+            APPL_TRACE_DEBUG3("found service [0x%04x], inst[%d] handle [%d]",
+                              p_cache->service_uuid.id.uuid.uu.uuid16,
+                              p_cache->service_uuid.id.inst_id,
+                              p_cache->s_handle);
+//#endif
+            if (p_clcb->p_rcb->p_cback)
+            {
+                memset(&cb_data, 0, sizeof(tBTA_GATTC));
+
+                cb_data.srvc_res.conn_id = p_clcb->bta_conn_id;
+                memcpy(&cb_data.srvc_res.service_uuid, &p_cache->service_uuid ,sizeof(tBTA_GATT_SRVC_ID));
+
+                (* p_clcb->p_rcb->p_cback)(BTA_GATTC_SEARCH_RES_EVT, &cb_data);
+                //todo  (tBTA_GATTC *)&p_cache->service_uuid);
+            }
+        }
+        p_cache = p_cache->p_next;
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_find_record
+**
+** Description      search local cache for matching attribute record.
+**
+** Parameter        p_result: output parameter to store the characteristic/
+**                            included service GATT ID.
+**
+** Returns          GATT_ERROR is no recording found. BTA_GATT_OK if record found.
+**
+*******************************************************************************/
+static tBTA_GATT_STATUS bta_gattc_find_record(tBTA_GATTC_SERV *p_srcb,
+                                              tBTA_GATTC_ATTR_TYPE attr_type,
+                                              tBTA_GATT_SRVC_ID *p_service_id,
+                                              tBTA_GATT_ID  *p_start_rec,
+                                              tBT_UUID      * p_uuid_cond,
+                                              tBTA_GATT_ID  *p_result,
+                                              void *p_param)
+{
+    tBTA_GATTC_CACHE    *p_cache = p_srcb->p_srvc_cache;
+    tBTA_GATT_STATUS    status = BTA_GATT_ERROR;
+    tBT_UUID            uuid_cond = {0}, start_descr = {0};
+    UINT8               i, j;
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+    BOOLEAN             char_found = FALSE, descr_found = FALSE;
+
+    if (p_uuid_cond)
+        memcpy(&uuid_cond, p_uuid_cond, sizeof(tBT_UUID));
+
+    for (i = 0;  p_cache <= p_srcb->p_cur_srvc && p_cache && status != BTA_GATT_OK; i ++)
+    {
+        if (bta_gattc_uuid_compare(p_service_id->id.uuid, p_cache->service_uuid.id.uuid, FALSE) &&
+            p_service_id->id.inst_id == p_cache->service_uuid.id.inst_id &&
+            p_service_id->is_primary == p_cache->service_uuid.is_primary)
+        {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+            APPL_TRACE_DEBUG2("found matching service [0x%04x], inst[%d]",
+                              p_cache->service_uuid.id.uuid.uu.uuid16,
+                              p_cache->service_uuid.id.inst_id);
+#endif
+            p_attr = p_cache->p_attr;
+
+            for (j = 0; p_attr; j ++)
+            {
+#if (defined BTA_GATT_DEBUG && BTA_GATT_DEBUG == TRUE)
+                APPL_TRACE_DEBUG5("\t Attr[%d] handle[0x%04x] uuid[0x%04x] inst[%d] type[%d]",
+                                  j + 1, p_attr->attr_handle,
+                                  p_attr->p_uuid->uuid16,
+                                  p_attr->inst_id,
+                                  p_attr->attr_type);
+#endif
+                bta_gattc_pack_attr_uuid(p_attr, &p_result->uuid);
+
+                if (p_start_rec != NULL && char_found == FALSE)
+                {
+                    /* find the starting record first */
+                    if (bta_gattc_uuid_compare(p_start_rec->uuid, p_result->uuid, FALSE) &&
+                        p_start_rec->inst_id  == p_attr->inst_id &&
+                        (attr_type == p_attr->attr_type ||
+                        /* find descriptor would look for characteristic first */
+                         (attr_type == BTA_GATTC_ATTR_TYPE_CHAR_DESCR && p_attr->attr_type == BTA_GATTC_ATTR_TYPE_CHAR)))
+                    {
+                        char_found = TRUE;
+                    }
+                }
+                else
+                {
+                    /* if looking for descriptor, here is the where the descrptor to be found */
+                    if (attr_type == BTA_GATTC_ATTR_TYPE_CHAR_DESCR)
+                    {
+                        /* starting descriptor UUID */
+                        if (p_param != NULL)
+                            memcpy(&start_descr, p_param, sizeof(tBT_UUID));
+                        /* next characeteristic already, return error */
+                        if (p_attr->attr_type != BTA_GATTC_ATTR_TYPE_CHAR_DESCR)
+                        {
+                            break;
+                        }
+                        else
+                        {
+                            if (start_descr.len != 0 && !descr_found)
+                            {
+                                if (bta_gattc_uuid_compare(start_descr, p_result->uuid, FALSE))
+                                {
+                                    descr_found = TRUE;
+                                }
+                            }
+                            else
+                            {
+                                /* with matching descriptor */
+                                if (bta_gattc_uuid_compare(uuid_cond, p_result->uuid, FALSE))
+                                {
+                                    status = BTA_GATT_OK;
+                                    break;
+                                }
+                            }
+                        }
+                    }
+                    else
+                    {
+                        if (bta_gattc_uuid_compare(uuid_cond, p_result->uuid, FALSE) &&
+                            attr_type == p_attr->attr_type)
+                        {
+
+                            APPL_TRACE_DEBUG0("found char handle mapping characteristic");
+                            p_result->inst_id = p_attr->inst_id;
+
+                            if (p_param != NULL)
+                            {
+                                if (attr_type == BTA_GATTC_ATTR_TYPE_CHAR ||
+                                    attr_type == BTA_GATTC_ATTR_TYPE_INCL_SRVC)
+                                {
+                                    *(tBTA_GATT_CHAR_PROP *)p_param = p_attr->property;
+                                }
+                            }
+
+                            status = BTA_GATT_OK;
+                            break;
+                        }
+                    }
+                }
+                p_attr = p_attr->p_next;
+            }
+            if (status)
+            {
+                APPL_TRACE_ERROR0("In the given service, can not find matching record");
+            }
+            break;
+        }
+
+        p_cache = p_cache->p_next;
+    }
+    return status;
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_query_cache
+**
+** Description      search local cache for matching attribute record.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_srvc_id: the service ID of which the characteristic is belonged to.
+**                  *p_start_rec: start the search from the next record
+**                                  after the one identified by *p_start_rec.
+**                  p_uuid_cond: UUID, if NULL find the first available
+**                               characteristic/included service.
+**                  p_output:   output parameter which will store the GATT ID
+**                              of the characteristic /included service found.
+**
+** Returns          BTA_GATT_ERROR is no recording found. BTA_GATT_OK if record found.
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_query_cache(UINT16 conn_id,
+                                       tBTA_GATTC_ATTR_TYPE query_type,
+                                       tBTA_GATT_SRVC_ID *p_srvc_id,
+                                       tBTA_GATT_ID *p_start_rec,
+                                       tBT_UUID *p_uuid_cond,
+                                       tBTA_GATT_ID *p_output,
+                                       void *p_param)
+{
+    tBTA_GATTC_CLCB *p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id);
+    tBTA_GATT_STATUS status = BTA_GATT_ILLEGAL_PARAMETER;
+
+    /* lock other GKI task */
+    GKI_sched_lock();
+
+    APPL_TRACE_DEBUG0("bta_gattc_query_cache");
+
+    if (p_clcb != NULL )
+    {
+        if (p_clcb->state == BTA_GATTC_CONN_ST)
+        {
+            if (p_clcb->p_srcb &&
+                !p_clcb->p_srcb->p_srvc_list && /* no active discovery */
+                p_clcb->p_srcb->p_srvc_cache)
+            {
+                status = bta_gattc_find_record(p_clcb->p_srcb,
+                                               query_type,
+                                               p_srvc_id,
+                                               p_start_rec,
+                                               p_uuid_cond,
+                                               p_output,
+                                               p_param);
+            }
+            else
+            {
+                status = BTA_GATT_ERROR;
+                APPL_TRACE_ERROR0("No server cache available");
+            }
+        }
+        else
+        {
+            APPL_TRACE_ERROR1("server cache not available, CLCB state = %d", p_clcb->state);
+
+            status = (p_clcb->state == BTA_GATTC_DISCOVER_ST) ? BTA_GATT_BUSY : BTA_GATT_ERROR;
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Unknown conn ID: %d", conn_id);
+    }
+    GKI_sched_unlock();
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_rebuild_cache
+**
+** Description      rebuild server cache from NV cache.
+**
+** Parameters
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_rebuild_cache(tBTA_GATTC_SERV *p_srvc_cb, UINT16 num_attr,
+                             tBTA_GATTC_NV_ATTR *p_attr, UINT16 attr_index)
+{
+    /* first attribute loading, initialize buffer */
+    APPL_TRACE_ERROR0("bta_gattc_rebuild_cache");
+    if (attr_index == 0)
+    {
+        while (p_srvc_cb->cache_buffer.p_first)
+            GKI_freebuf (GKI_dequeue (&p_srvc_cb->cache_buffer));
+
+        if (bta_gattc_alloc_cache_buf(p_srvc_cb) == NULL)
+        {
+            APPL_TRACE_ERROR0("allocate cache buffer failed, no resources");
+        }
+        else
+        {
+            p_srvc_cb->p_cur_srvc = p_srvc_cb->p_srvc_cache = NULL;
+        }
+    }
+
+    while (num_attr > 0 && p_attr != NULL)
+    {
+        switch (p_attr->attr_type)
+        {
+            case BTA_GATTC_ATTR_TYPE_SRVC:
+                bta_gattc_add_srvc_to_cache(p_srvc_cb,
+                                            p_attr->s_handle,
+                                            p_attr->e_handle,
+                                            &p_attr->uuid,
+                                            p_attr->is_primary,
+                                            p_attr->id);
+                break;
+
+            case BTA_GATTC_ATTR_TYPE_CHAR:
+            case BTA_GATTC_ATTR_TYPE_CHAR_DESCR:
+            case BTA_GATTC_ATTR_TYPE_INCL_SRVC:
+                bta_gattc_add_attr_to_cache(p_srvc_cb,
+                                            p_attr->s_handle,
+                                            &p_attr->uuid,
+                                            p_attr->prop,
+                                            p_attr->attr_type);
+                break;
+        }
+        p_attr ++;
+        num_attr --;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_fill_nv_attr
+**
+** Description      fill a NV attribute entry value
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_fill_nv_attr(tBTA_GATTC_NV_ATTR *p_attr, UINT8 type, UINT16 s_handle,
+                            UINT16 e_handle, UINT8 id, tBT_UUID uuid, UINT8 prop, BOOLEAN is_primary)
+{
+    p_attr->s_handle    = s_handle;
+    p_attr->e_handle    = e_handle;
+    p_attr->attr_type   = type;
+    p_attr->is_primary  = is_primary;
+    p_attr->id          = id;
+    p_attr->prop        = prop;
+
+    memcpy(&p_attr->uuid, &uuid, sizeof(tBT_UUID));
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_cache_save
+**
+** Description      save the server cache into NV
+**
+** Returns          None.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_cache_save(tBTA_GATTC_SERV *p_srvc_cb, UINT16 conn_id)
+{
+    tBTA_GATTC_CACHE        *p_cur_srvc = p_srvc_cb->p_srvc_cache;
+    UINT8                   i = 0;
+    UINT16                  offset = 0;
+    tBTA_GATTC_NV_ATTR      nv_attr[BTA_GATTC_NV_LOAD_MAX];
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+    tBT_UUID                uuid;
+
+    while (p_cur_srvc && i < BTA_GATTC_NV_LOAD_MAX)
+    {
+        if (offset ++ >= p_srvc_cb->attr_index)
+        {
+            bta_gattc_fill_nv_attr(&nv_attr[i++],
+                                   BTA_GATTC_ATTR_TYPE_SRVC,
+                                   p_cur_srvc->s_handle,
+                                   p_cur_srvc->e_handle,
+                                   p_cur_srvc->service_uuid.id.inst_id,
+                                   p_cur_srvc->service_uuid.id.uuid,
+                                   0,
+                                   p_cur_srvc->service_uuid.is_primary);
+        }
+
+        p_attr = p_cur_srvc->p_attr;
+
+        for (; p_attr && i < BTA_GATTC_NV_LOAD_MAX ; offset ++, p_attr = p_attr->p_next)
+        {
+            if (offset >= p_srvc_cb->attr_index)
+            {
+                if ((uuid.len = p_attr->uuid_len) == LEN_UUID_16)
+                {
+                    uuid.uu.uuid16 = p_attr->p_uuid->uuid16;
+                }
+                else
+                {
+                    memcpy(uuid.uu.uuid128, p_attr->p_uuid->uuid128, LEN_UUID_128);
+                }
+
+                bta_gattc_fill_nv_attr(&nv_attr[i++],
+                                       p_attr->attr_type,
+                                       p_attr->attr_handle,
+                                       0,
+                                       p_attr->inst_id,
+                                       uuid,
+                                       p_attr->property,
+                                       FALSE);
+            }
+        }
+        p_cur_srvc = p_cur_srvc->p_next;
+    }
+
+    if (i > 0)
+    {
+        bta_gattc_co_cache_save(p_srvc_cb->server_bda, BTA_GATTC_CI_CACHE_SAVE_EVT, i,
+                                nv_attr, p_srvc_cb->attr_index, conn_id);
+
+        p_srvc_cb->attr_index += i;
+
+        return TRUE;
+    }
+    else
+    {
+        return FALSE;
+    }
+}
+#endif /* BTA_GATT_INCLUDED */
+
diff --git a/bta/gatt/bta_gattc_ci.c b/bta/gatt/bta_gattc_ci.c
new file mode 100644
index 0000000..212126f
--- /dev/null
+++ b/bta/gatt/bta_gattc_ci.c
@@ -0,0 +1,137 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the GATT call-in functions.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_gattc_ci.h"
+#include "gki.h"
+#include "bd.h"
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_cache_open
+**
+** Description      This function sends an event to indicate server cache open
+**                  completed.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_ci_cache_open(BD_ADDR server_bda, UINT16 evt, tBTA_GATT_STATUS status,
+                             UINT16 conn_id)
+{
+    tBTA_GATTC_CI_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_GATTC_CI_EVT *) GKI_getbuf(sizeof(tBTA_GATTC_CI_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->hdr.layer_specific = conn_id;
+
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_cache_load
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  load the servere cache and ready to send it to the stack.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  num_bytes_read - number of bytes read into the buffer
+**                      specified in the read callout-function.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_ci_cache_load(BD_ADDR server_bda, UINT16 evt, UINT16 num_attr,
+                             tBTA_GATTC_NV_ATTR *p_attr, tBTA_GATT_STATUS status,
+                             UINT16 conn_id)
+{
+    tBTA_GATTC_CI_LOAD  *p_evt;
+
+    if ((p_evt = (tBTA_GATTC_CI_LOAD *) GKI_getbuf(sizeof(tBTA_GATTC_CI_LOAD))) != NULL)
+    {
+        memset(p_evt, 0, sizeof(tBTA_GATTC_CI_LOAD));
+
+        p_evt->hdr.event = evt;
+        p_evt->hdr.layer_specific = conn_id;
+
+        p_evt->status    = status;
+        p_evt->num_attr  = (num_attr > BTA_GATTC_NV_LOAD_MAX) ? BTA_GATTC_NV_LOAD_MAX : num_attr;
+
+        if (p_evt->num_attr > 0 && p_attr != NULL)
+        {
+            memcpy(p_evt->attr, p_attr, p_evt->num_attr * sizeof(tBTA_GATTC_NV_ATTR));
+        }
+
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_cache_save
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  save the servere cache.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  evt - callin event code.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_ERROR if an error has occurred.
+*8                  conn_id - for this NV operation for.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_ci_cache_save(BD_ADDR server_bda, UINT16 evt, tBTA_GATT_STATUS status,
+                             UINT16 conn_id)
+{
+    tBTA_GATTC_CI_EVT  *p_evt;
+
+    if ((p_evt = (tBTA_GATTC_CI_EVT *) GKI_getbuf(sizeof(tBTA_GATTC_CI_EVT))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->hdr.layer_specific = conn_id;
+
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gattc_int.h b/bta/gatt/bta_gattc_int.h
new file mode 100644
index 0000000..407e5d8
--- /dev/null
+++ b/bta/gatt/bta_gattc_int.h
@@ -0,0 +1,464 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private file for the file transfer client (FTC).
+ *
+ ******************************************************************************/
+#ifndef BTA_GATTC_INT_H
+#define BTA_GATTC_INT_H
+
+#include "bt_target.h"
+#include "bta_sys.h"
+#include "bta_gatt_api.h"
+#include "bta_gattc_ci.h"
+#include "bta_gattc_co.h"
+
+#include "gki.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+enum
+{
+    BTA_GATTC_API_OPEN_EVT   = BTA_SYS_EVT_START(BTA_ID_GATTC),
+    BTA_GATTC_INT_OPEN_FAIL_EVT,
+    BTA_GATTC_API_CANCEL_OPEN_EVT,
+    BTA_GATTC_INT_CANCEL_OPEN_OK_EVT,
+
+    BTA_GATTC_API_READ_EVT,
+    BTA_GATTC_API_WRITE_EVT,
+    BTA_GATTC_API_EXEC_EVT,
+
+    BTA_GATTC_API_CLOSE_EVT,
+
+    BTA_GATTC_API_SEARCH_EVT,
+    BTA_GATTC_API_CONFIRM_EVT,
+    BTA_GATTC_API_READ_MULTI_EVT,
+
+    BTA_GATTC_INT_CONN_EVT,
+    BTA_GATTC_INT_DISCOVER_EVT,
+    BTA_GATTC_DISCOVER_CMPL_EVT,
+    BTA_GATTC_OP_CMPL_EVT,
+    BTA_GATTC_INT_DISCONN_EVT,
+
+    /* for cache loading/saving */
+    BTA_GATTC_START_CACHE_EVT,
+    BTA_GATTC_CI_CACHE_OPEN_EVT,
+    BTA_GATTC_CI_CACHE_LOAD_EVT,
+    BTA_GATTC_CI_CACHE_SAVE_EVT,
+
+    BTA_GATTC_INT_START_IF_EVT,
+    BTA_GATTC_API_REG_EVT,
+    BTA_GATTC_API_DEREG_EVT,
+    BTA_GATTC_INT_DEREG_EVT
+
+};
+typedef UINT16 tBTA_GATTC_INT_EVT;
+
+/* max client application GATTC can support */
+#ifndef     BTA_GATTC_CL_MAX
+#define     BTA_GATTC_CL_MAX    4
+#endif
+
+/* max known devices GATTC can support */
+#ifndef     BTA_GATTC_KNOWN_SR_MAX
+#define     BTA_GATTC_KNOWN_SR_MAX    4
+#endif
+
+#ifndef BTA_GATTC_CLCB_MAX
+    #define BTA_GATTC_CLCB_MAX      GATT_CL_MAX_LCB
+#endif
+
+#define BTA_GATTC_WRITE_PREPARE          GATT_WRITE_PREPARE
+
+/* internal strucutre for GATTC register API  */
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBT_UUID                app_uuid;
+    tBTA_GATTC_CBACK        *p_cback;
+}tBTA_GATTC_API_REG;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATTC_IF           client_if;
+}tBTA_GATTC_INT_START_IF;
+
+typedef tBTA_GATTC_INT_START_IF tBTA_GATTC_API_DEREG;
+typedef tBTA_GATTC_INT_START_IF tBTA_GATTC_INT_DEREG;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BD_ADDR                 remote_bda;
+    tBTA_GATTC_IF           client_if;
+    BOOLEAN                 is_direct;
+} tBTA_GATTC_API_OPEN;
+
+typedef tBTA_GATTC_API_OPEN tBTA_GATTC_API_CANCEL_OPEN;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATT_AUTH_REQ      auth_req;
+    tBTA_GATT_SRVC_ID       srvc_id;
+    tBTA_GATT_ID            char_id;
+    tBT_UUID                descr_type;
+} tBTA_GATTC_API_READ;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATT_AUTH_REQ      auth_req;
+    tBTA_GATT_SRVC_ID       srvc_id;
+    tBTA_GATT_ID            char_id;
+    tBT_UUID                descr_type;
+    tBTA_GATTC_WRITE_TYPE   write_type;
+    UINT16                  offset;
+    UINT16                  len;
+    UINT8                   *p_value;
+}tBTA_GATTC_API_WRITE;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    BOOLEAN                 is_execute;
+}tBTA_GATTC_API_EXEC;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATT_SRVC_ID       srvc_id;
+    tBTA_GATT_ID            char_id;
+} tBTA_GATTC_API_CONFIRM;
+
+typedef tGATT_CL_COMPLETE tBTA_GATTC_CMPL;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    UINT8                   op_code;
+    tGATT_STATUS            status;
+    tBTA_GATTC_CMPL         *p_cmpl;
+}tBTA_GATTC_OP_CMPL;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    tBT_UUID            srvc_uuid;
+}tBTA_GATTC_API_SEARCH;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATT_AUTH_REQ      auth_req;
+    UINT8                   num_attr;
+    tBTA_GATTC_ATTR_ID      *p_id_list;
+}tBTA_GATTC_API_READ_MULTI;
+
+typedef union
+{
+    BT_HDR                      hdr;
+    tBTA_GATTC_API_REG          api_reg;
+    tBTA_GATTC_API_DEREG        api_dereg;
+    tBTA_GATTC_API_OPEN         api_conn;
+    tBTA_GATTC_API_CANCEL_OPEN  api_cancel_conn;
+    tBTA_GATTC_API_READ         api_read;
+    tBTA_GATTC_API_SEARCH       api_search;
+    tBTA_GATTC_API_WRITE        api_write;
+    tBTA_GATTC_API_CONFIRM      api_confirm;
+    tBTA_GATTC_API_EXEC         api_exec;
+    tBTA_GATTC_API_READ_MULTI   api_read_multi;
+    tBTA_GATTC_OP_CMPL          op_cmpl;
+    tBTA_GATTC_CI_EVT           ci_open;
+    tBTA_GATTC_CI_EVT           ci_save;
+    tBTA_GATTC_CI_LOAD          ci_load;
+
+    tBTA_GATTC_INT_START_IF     int_start_if;
+    tBTA_GATTC_INT_DEREG        int_dereg;
+
+} tBTA_GATTC_DATA;
+
+
+/* GATT server cache on the client */
+typedef union
+{
+    UINT8               uuid128[LEN_UUID_128];
+    UINT16              uuid16;
+}tBTA_GATTC_UUID;
+
+typedef struct gattc_attr_cache
+{
+    tBTA_GATTC_UUID         *p_uuid;
+    struct                  gattc_attr_cache *p_next;
+    UINT16                  uuid_len;
+    UINT16                  attr_handle;
+    UINT8                   inst_id;
+    tBTA_GATT_CHAR_PROP     property; /* if characteristic, it is char property;
+                                         if included service, flag primary,
+                                         if descriptor, not used */
+    tBTA_GATTC_ATTR_TYPE    attr_type;
+// btla-specific ++
+} __attribute__((packed)) tBTA_GATTC_CACHE_ATTR;
+// btla-specific --
+
+typedef struct gattc_svc_cache
+{
+    tBTA_GATT_SRVC_ID       service_uuid;
+    tBTA_GATTC_CACHE_ATTR   *p_attr;
+    tBTA_GATTC_CACHE_ATTR   *p_last_attr;
+    UINT16                  s_handle;
+    UINT16                  e_handle;
+    struct                  gattc_svc_cache *p_next;
+// btla-specific ++
+} __attribute__((packed)) tBTA_GATTC_CACHE;
+// btla-specific --
+
+typedef struct
+{
+    tBT_UUID            uuid;
+    UINT16              s_handle;
+    UINT16              e_handle;
+    BOOLEAN             is_primary;
+    UINT8               srvc_inst_id;
+    tBTA_GATT_CHAR_PROP property;
+}tBTA_GATTC_ATTR_REC;
+
+
+#define BTA_GATTC_MAX_CACHE_CHAR    40
+#define BTA_GATTC_ATTR_LIST_SIZE    (BTA_GATTC_MAX_CACHE_CHAR * sizeof(tBTA_GATTC_ATTR_REC))
+
+#ifndef BTA_GATTC_CACHE_SRVR_SIZE
+    #define BTA_GATTC_CACHE_SRVR_SIZE   600
+#endif
+
+enum
+{
+    BTA_GATTC_IDLE_ST = 0,      /* Idle  */
+    BTA_GATTC_W4_CONN_ST,       /* Wait for connection -  (optional) */
+    BTA_GATTC_CONN_ST,          /* connected state */
+    BTA_GATTC_DISCOVER_ST       /* discover is in progress */
+};
+typedef UINT8 tBTA_GATTC_STATE;
+
+typedef struct
+{
+    BOOLEAN             in_use;
+    BD_ADDR             server_bda;
+    BOOLEAN             connected;
+
+#define BTA_GATTC_SERV_IDLE     0
+#define BTA_GATTC_SERV_LOAD     1
+#define BTA_GATTC_SERV_SAVE     2
+
+    UINT8               state;
+
+    tBTA_GATTC_CACHE    *p_srvc_cache;
+    tBTA_GATTC_CACHE    *p_cur_srvc;
+    BUFFER_Q            cache_buffer;   /* buffer queue used for storing the cache data */
+    UINT8               *p_free;        /* starting point to next available byte */
+    UINT16              free_byte;      /* number of available bytes in server cache buffer */
+    UINT8               update_count;   /* indication received */
+    UINT8               num_clcb;       /* number of associated CLCB */
+
+
+    tBTA_GATTC_ATTR_REC *p_srvc_list;
+    UINT8               cur_srvc_idx;
+    UINT8               cur_char_idx;
+    UINT8               next_avail_idx;
+    UINT8               total_srvc;
+    UINT8               total_char;
+
+    UINT8               srvc_hdl_chg;   /* service handle change indication pending */
+    UINT16              attr_index;     /* cahce NV saving/loading attribute index */
+
+} tBTA_GATTC_SERV;
+
+#ifndef BTA_GATTC_NOTIF_REG_MAX
+#define BTA_GATTC_NOTIF_REG_MAX     4
+#endif
+
+typedef struct
+{
+    BOOLEAN             in_use;
+    BD_ADDR             remote_bda;
+    tBTA_GATTC_CHAR_ID  char_id;
+}tBTA_GATTC_NOTIF_REG;
+
+typedef struct
+{
+    tBTA_GATTC_CBACK        *p_cback;
+    BOOLEAN                 in_use;
+    tBTA_GATTC_IF           client_if;      /* client interface with BTE stack for this application */
+    UINT8                   num_clcb;       /* number of associated CLCB */
+    BOOLEAN                 dereg_pending;
+    tBT_UUID                app_uuid;
+    tBTA_GATTC_NOTIF_REG    notif_reg[BTA_GATTC_NOTIF_REG_MAX];
+}tBTA_GATTC_RCB;
+
+/* client channel is a mapping between a BTA client(cl_id) and a remote BD address */
+typedef struct
+{
+    UINT16              bta_conn_id;    /* client channel ID, unique for clcb */
+    BD_ADDR             bda;
+    tBTA_GATTC_RCB      *p_rcb;         /* pointer to the registration CB */
+    tBTA_GATTC_SERV     *p_srcb;    /* server cache CB */
+    tBTA_GATTC_DATA     *p_q_cmd;   /* command in queue waiting for execution */
+
+#define BTA_GATTC_NO_SCHEDULE       0
+#define BTA_GATTC_DISC_WAITING      0x01
+#define BTA_GATTC_REQ_WAITING       0x10
+
+    UINT8               auto_update; /* auto update is waiting */
+    BOOLEAN             in_use;
+    tBTA_GATTC_STATE    state;
+    tBTA_GATT_STATUS    status;
+    UINT16              reason;
+} tBTA_GATTC_CLCB;
+
+/* back ground connection tracking information */
+#if GATT_MAX_APPS <= 8
+typedef UINT8 tBTA_GATTC_CIF_MASK ;
+#elif GATT_MAX_APPS <= 16
+typedef UINT16 tBTA_GATTC_CIF_MASK;
+#elif GATT_MAX_APPS <= 32
+typedef UINT32 tBTA_GATTC_CIF_MASK;
+#endif
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    BD_ADDR                 remote_bda;
+    tBTA_GATTC_CIF_MASK     cif_mask;
+
+}tBTA_GATTC_BG_TCK;
+
+typedef struct
+{
+    tBTA_GATTC_BG_TCK   bg_track[BTA_GATTC_KNOWN_SR_MAX];
+    tBTA_GATTC_RCB      cl_rcb[BTA_GATTC_CL_MAX];
+
+    tBTA_GATTC_CLCB     clcb[BTA_GATTC_CLCB_MAX];
+    tBTA_GATTC_SERV     known_server[BTA_GATTC_KNOWN_SR_MAX];
+
+    tSDP_DISCOVERY_DB   *p_sdp_db;
+    UINT16              sdp_conn_id;
+}tBTA_GATTC_CB;
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* GATTC control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_GATTC_CB  bta_gattc_cb;
+#else
+extern tBTA_GATTC_CB *bta_gattc_cb_ptr;
+#define bta_gattc_cb (*bta_gattc_cb_ptr)
+#endif
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+extern BOOLEAN bta_gattc_hdl_event(BT_HDR *p_msg);
+extern void bta_gattc_sm_execute(tBTA_GATTC_CLCB *p_clcb, UINT16 event, tBTA_GATTC_DATA *p_data);
+
+/* function processed outside SM */
+extern void bta_gattc_register(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_start_if(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_process_api_open (tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA * p_msg);
+extern void bta_gattc_process_api_open_cancel (tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA * p_msg);
+extern void bta_gattc_deregister(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_int_deregister(tBTA_GATTC_CB *p_cb, tBTA_GATTC_DATA *p_data);
+
+/* function within state machine */
+extern void bta_gattc_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_open_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_open_error(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+extern void bta_gattc_cancel_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_cancel_open_ok(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_cancel_open_error(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+extern void bta_gattc_conn(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+extern void bta_gattc_close(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_close_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+extern void bta_gattc_start_discover(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_disc_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_read(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_write(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_op_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_q_cmd(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_search(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_fail(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_confirm(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_execute(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_read_multi(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_ci_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_ci_load(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_ci_close(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_ci_save(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_cache_open(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_ignore_op_cmpl(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+extern void bta_gattc_init_bk_conn(tBTA_GATTC_API_OPEN *p_data, tBTA_GATTC_RCB *p_clreg);
+extern void bta_gattc_cancel_bk_conn(tBTA_GATTC_API_CANCEL_OPEN *p_data);
+extern void bta_gattc_send_open_cback( tBTA_GATTC_RCB *p_clreg, tBTA_GATT_STATUS status,
+                                       BD_ADDR remote_bda, UINT16 conn_id);
+
+/* utility functions */
+extern tBTA_GATTC_CLCB * bta_gattc_find_clcb_by_cif (UINT8 client_if, BD_ADDR remote_bda); //todo
+extern tBTA_GATTC_CLCB * bta_gattc_find_clcb_by_conn_id (UINT16 conn_id);
+extern tBTA_GATTC_CLCB * bta_gattc_clcb_alloc(tBTA_GATTC_IF client_if, BD_ADDR remote_bda);
+extern void bta_gattc_clcb_dealloc(tBTA_GATTC_CLCB *p_clcb);
+extern tBTA_GATTC_CLCB * bta_gattc_find_alloc_clcb(tBTA_GATTC_IF client_if, BD_ADDR remote_bda);
+extern tBTA_GATTC_RCB * bta_gattc_cl_get_regcb(UINT8 client_if);
+extern tBTA_GATTC_SERV * bta_gattc_find_srcb(BD_ADDR bda);
+extern tBTA_GATTC_SERV * bta_gattc_srcb_alloc(BD_ADDR bda);
+extern tBTA_GATTC_SERV * bta_gattc_find_scb_by_cid (UINT16 conn_id);
+extern BOOLEAN bta_gattc_enqueue(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+extern UINT16 bta_gattc_id2handle(tBTA_GATTC_SERV *p_srcb, tBTA_GATT_SRVC_ID *p_service_id, tBTA_GATT_ID *p_char_id, tBT_UUID descr_uuid);
+extern BOOLEAN bta_gattc_handle2id(tBTA_GATTC_SERV *p_srcb, UINT16 handle, tBTA_GATT_SRVC_ID *service_id, tBTA_GATT_ID *char_id, tBT_UUID *p_type);
+extern BOOLEAN bta_gattc_uuid_compare (tBT_UUID src, tBT_UUID tar, BOOLEAN is_precise);
+extern void bta_gattc_pack_attr_uuid(tBTA_GATTC_CACHE_ATTR   *p_attr, tBT_UUID *p_uuid);
+extern BOOLEAN bta_gattc_check_notif_registry(tBTA_GATTC_RCB  *p_clreg, tBTA_GATTC_SERV *p_srcb, tBTA_GATTC_NOTIFY  *p_notify);
+extern tBTA_GATT_STATUS bta_gattc_pack_read_cb_data(tBTA_GATTC_SERV *p_srcb, tBT_UUID descr_uuid, tGATT_VALUE *p_attr, tBTA_GATT_READ_VAL *p_value);
+extern BOOLEAN bta_gattc_mark_bg_conn (tBTA_GATTC_IF client_if,  BD_ADDR remote_bda, BOOLEAN add);
+extern BOOLEAN bta_gattc_check_bg_conn (tBTA_GATTC_IF client_if,  BD_ADDR remote_bda);
+extern UINT8 bta_gattc_num_reg_app(void);
+extern void bta_gattc_clear_notif_registration(UINT16 conn_id);
+
+/* discovery functions */
+extern void bta_gattc_disc_res_cback (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_DISC_RES *p_data);
+extern void bta_gattc_disc_cmpl_cback (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status);
+extern tBTA_GATT_STATUS bta_gattc_discover_procedure(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb, UINT8 disc_type);
+extern tBTA_GATT_STATUS bta_gattc_discover_pri_service(UINT16 conn_id, tBTA_GATTC_SERV *p_server_cb, UINT8 disc_type);
+extern void bta_gattc_search_service(tBTA_GATTC_CLCB *p_clcb, tBT_UUID uuid);
+extern tBTA_GATT_STATUS bta_gattc_query_cache(UINT16 conn_id, UINT8 query_type, tBTA_GATT_SRVC_ID *p_srvc_id,
+                                              tBTA_GATT_ID *p_start_rec,tBT_UUID *p_uuid_cond,
+                                              tBTA_GATT_ID *p_output, void *p_property);
+extern tBTA_GATT_STATUS bta_gattc_init_cache(tBTA_GATTC_SERV *p_srvc_cb);
+extern void bta_gattc_rebuild_cache(tBTA_GATTC_SERV *p_srcv, UINT16 num_attr, tBTA_GATTC_NV_ATTR *p_attr, UINT16 attr_index);
+extern BOOLEAN bta_gattc_cache_save(tBTA_GATTC_SERV *p_srvc_cb, UINT16 conn_id);
+
+#endif /* BTA_GATTC_INT_H */
diff --git a/bta/gatt/bta_gattc_main.c b/bta/gatt/bta_gattc_main.c
new file mode 100644
index 0000000..a1fb536
--- /dev/null
+++ b/bta/gatt/bta_gattc_main.c
@@ -0,0 +1,486 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT client main functions and state machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "bta_gattc_int.h"
+#include "gki.h"
+
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_GATTC_OPEN,
+    BTA_GATTC_OPEN_FAIL,
+    //BTA_GATTC_OPEN_FAIL_IN_CONN,        //<--- need to remove this?
+    BTA_GATTC_OPEN_ERROR,
+    BTA_GATTC_CANCEL_OPEN,
+    BTA_GATTC_CANCEL_OPEN_OK,
+    BTA_GATTC_CANCEL_OPEN_ERROR,
+    BTA_GATTC_CONN,
+    BTA_GATTC_START_DISCOVER,
+    BTA_GATTC_DISC_CMPL,
+
+    BTA_GATTC_Q_CMD,
+    BTA_GATTC_CLOSE,
+    BTA_GATTC_CLOSE_FAIL,
+    BTA_GATTC_READ,
+    BTA_GATTC_WRITE,
+
+    BTA_GATTC_OP_CMPL,
+    BTA_GATTC_SEARCH,
+    BTA_GATTC_FAIL,
+    BTA_GATTC_CONFIRM,
+    BTA_GATTC_EXEC,
+    BTA_GATTC_READ_MULTI,
+    BTA_GATTC_CI_OPEN,
+    BTA_GATTC_CI_LOAD,
+    BTA_GATTC_CI_SAVE,
+    BTA_GATTC_CACHE_OPEN,
+    BTA_GATTC_IGNORE_OP_CMPL,
+
+    BTA_GATTC_IGNORE
+};
+/* type for action functions */
+typedef void (*tBTA_GATTC_ACTION)(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data);
+
+/* action function list */
+const tBTA_GATTC_ACTION bta_gattc_action[] =
+{
+    bta_gattc_open,
+    bta_gattc_open_fail,
+    //bta_gattc_open_fail_in_conn,            //<--- need to remove this?
+    bta_gattc_open_error,
+    bta_gattc_cancel_open,
+    bta_gattc_cancel_open_ok,
+    bta_gattc_cancel_open_error,
+    bta_gattc_conn,
+    bta_gattc_start_discover,
+    bta_gattc_disc_cmpl,
+
+    bta_gattc_q_cmd,
+    bta_gattc_close,
+    bta_gattc_close_fail,
+    bta_gattc_read,
+    bta_gattc_write,
+
+    bta_gattc_op_cmpl,
+    bta_gattc_search,
+    bta_gattc_fail,
+    bta_gattc_confirm,
+    bta_gattc_execute,
+    bta_gattc_read_multi,
+    bta_gattc_ci_open,
+    bta_gattc_ci_load,
+    bta_gattc_ci_save,
+    bta_gattc_cache_open,
+    bta_gattc_ignore_op_cmpl
+};
+
+
+/* state table information */
+#define BTA_GATTC_ACTIONS           1       /* number of actions */
+#define BTA_GATTC_NEXT_STATE          1       /* position of next state */
+#define BTA_GATTC_NUM_COLS            2       /* number of columns in state tables */
+
+/* state table for idle state */
+static const UINT8 bta_gattc_st_idle[][BTA_GATTC_NUM_COLS] =
+{
+/* Event                            Action 1                  Next state */
+/* BTA_GATTC_API_OPEN_EVT           */   {BTA_GATTC_OPEN,              BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_INT_OPEN_FAIL_EVT      */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_CANCEL_OPEN_EVT    */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_INT_CANCEL_OPEN_OK_EVT */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+
+/* BTA_GATTC_API_READ_EVT           */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_WRITE_EVT          */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_EXEC_EVT           */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+
+/* BTA_GATTC_API_CLOSE_EVT          */   {BTA_GATTC_CLOSE_FAIL,        BTA_GATTC_IDLE_ST},
+
+/* BTA_GATTC_API_SEARCH_EVT         */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_CONFIRM_EVT        */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_READ_MULTI_EVT     */   {BTA_GATTC_FAIL,              BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_INT_CONN_EVT           */   {BTA_GATTC_CONN,              BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_DISCOVER_EVT       */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_DISCOVER_CMPL_EVT      */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_OP_CMPL_EVT            */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_INT_DISCONN_EVT       */    {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+
+
+/* ===> for cache loading, saving   */
+/* BTA_GATTC_START_CACHE_EVT        */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_CI_CACHE_OPEN_EVT      */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_CI_CACHE_LOAD_EVT      */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_CI_CACHE_SAVE_EVT      */   {BTA_GATTC_IGNORE,            BTA_GATTC_IDLE_ST}
+};
+
+/* state table for wait for open state */
+static const UINT8 bta_gattc_st_w4_conn[][BTA_GATTC_NUM_COLS] =
+{
+/* Event                            Action 1                             Next state */
+/* BTA_GATTC_API_OPEN_EVT           */   {BTA_GATTC_OPEN,              BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_INT_OPEN_FAIL_EVT      */   {BTA_GATTC_OPEN_FAIL,         BTA_GATTC_IDLE_ST},
+/* BTA_GATTC_API_CANCEL_OPEN_EVT    */   {BTA_GATTC_CANCEL_OPEN,       BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_INT_CANCEL_OPEN_OK_EVT */   {BTA_GATTC_CANCEL_OPEN_OK,    BTA_GATTC_IDLE_ST},
+
+/* BTA_GATTC_API_READ_EVT           */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_API_WRITE_EVT          */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_API_EXEC_EVT           */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+
+/* BTA_GATTC_API_CLOSE_EVT          */   {BTA_GATTC_CLOSE_FAIL,         BTA_GATTC_W4_CONN_ST},
+
+/* BTA_GATTC_API_SEARCH_EVT         */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_API_CONFIRM_EVT        */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_API_READ_MULTI_EVT     */   {BTA_GATTC_FAIL,               BTA_GATTC_W4_CONN_ST},
+
+/* BTA_GATTC_INT_CONN_EVT           */   {BTA_GATTC_CONN,               BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_DISCOVER_EVT       */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_DISCOVER_CMPL_EVT       */  {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_OP_CMPL_EVT            */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_INT_DISCONN_EVT      */     {BTA_GATTC_CLOSE,              BTA_GATTC_IDLE_ST},
+
+/* ===> for cache loading, saving   */
+/* BTA_GATTC_START_CACHE_EVT        */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_CI_CACHE_OPEN_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_CI_CACHE_LOAD_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST},
+/* BTA_GATTC_CI_CACHE_SAVE_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_W4_CONN_ST}
+};
+
+/* state table for open state */
+static const UINT8 bta_gattc_st_connected[][BTA_GATTC_NUM_COLS] =
+{
+/* Event                            Action 1                            Next state */
+/* BTA_GATTC_API_OPEN_EVT           */   {BTA_GATTC_OPEN_ERROR,         BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_OPEN_FAIL_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_API_CANCEL_OPEN_EVT    */   {BTA_GATTC_CANCEL_OPEN_ERROR, BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_CANCEL_OPEN_OK_EVT */   {BTA_GATTC_IGNORE,            BTA_GATTC_CONN_ST},
+
+/* BTA_GATTC_API_READ_EVT           */   {BTA_GATTC_READ,               BTA_GATTC_CONN_ST},
+/* BTA_GATTC_API_WRITE_EVT          */   {BTA_GATTC_WRITE,              BTA_GATTC_CONN_ST},
+/* BTA_GATTC_API_EXEC_EVT           */   {BTA_GATTC_EXEC,               BTA_GATTC_CONN_ST},
+
+/* BTA_GATTC_API_CLOSE_EVT          */   {BTA_GATTC_CLOSE,              BTA_GATTC_IDLE_ST}, //BTA_GATTC_CLOSING_ST
+
+/* BTA_GATTC_API_SEARCH_EVT         */   {BTA_GATTC_SEARCH,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_API_CONFIRM_EVT        */   {BTA_GATTC_CONFIRM,            BTA_GATTC_CONN_ST},
+/* BTA_GATTC_API_READ_MULTI_EVT     */   {BTA_GATTC_READ_MULTI,         BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_CONN_EVT           */   {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_INT_DISCOVER_EVT       */   {BTA_GATTC_START_DISCOVER,     BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_DISCOVER_CMPL_EVT       */  {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_OP_CMPL_EVT            */   {BTA_GATTC_OP_CMPL,            BTA_GATTC_CONN_ST},
+
+/* BTA_GATTC_INT_DISCONN_EVT        */   {BTA_GATTC_CLOSE,              BTA_GATTC_IDLE_ST},
+
+/* ===> for cache loading, saving   */
+/* BTA_GATTC_START_CACHE_EVT        */   {BTA_GATTC_CACHE_OPEN,         BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_CI_CACHE_OPEN_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_CI_CACHE_LOAD_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST},
+/* BTA_GATTC_CI_CACHE_SAVE_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_CONN_ST}
+};
+
+/* state table for discover state */
+static const UINT8 bta_gattc_st_discover[][BTA_GATTC_NUM_COLS] =
+{
+/* Event                            Action 1                            Next state */
+/* BTA_GATTC_API_OPEN_EVT           */   {BTA_GATTC_OPEN_ERROR,         BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_INT_OPEN_FAIL_EVT      */   {BTA_GATTC_IGNORE,             BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_API_CANCEL_OPEN_EVT    */   {BTA_GATTC_CANCEL_OPEN_ERROR,  BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_INT_CANCEL_OPEN_OK_EVT */   {BTA_GATTC_FAIL,               BTA_GATTC_DISCOVER_ST},
+
+/* BTA_GATTC_API_READ_EVT           */   {BTA_GATTC_Q_CMD,              BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_API_WRITE_EVT          */   {BTA_GATTC_Q_CMD,              BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_API_EXEC_EVT           */   {BTA_GATTC_Q_CMD,              BTA_GATTC_DISCOVER_ST},
+
+/* BTA_GATTC_API_CLOSE_EVT          */   {BTA_GATTC_CLOSE,              BTA_GATTC_IDLE_ST    },    //BTA_GATTC_CLOSING_ST
+
+/* BTA_GATTC_API_SEARCH_EVT         */   {BTA_GATTC_Q_CMD,              BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_API_CONFIRM_EVT        */   {BTA_GATTC_CONFIRM,            BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_API_READ_MULTI_EVT     */   {BTA_GATTC_Q_CMD,              BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_INT_CONN_EVT           */   {BTA_GATTC_IGNORE,             BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_INT_DISCOVER_EVT       */   {BTA_GATTC_START_DISCOVER,     BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_DISCOVER_CMPL_EVT      */   {BTA_GATTC_DISC_CMPL,          BTA_GATTC_CONN_ST},
+/* BTA_GATTC_OP_CMPL_EVT            */   {BTA_GATTC_IGNORE_OP_CMPL,     BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_INT_DISCONN_EVT        */   {BTA_GATTC_CLOSE,              BTA_GATTC_IDLE_ST},
+
+/* ===> for cache loading, saving       */
+/* BTA_GATTC_START_CACHE_EVT        */   {BTA_GATTC_IGNORE,             BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_CI_CACHE_OPEN_EVT      */   {BTA_GATTC_CI_OPEN,            BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_CI_CACHE_LOAD_EVT      */   {BTA_GATTC_CI_LOAD,            BTA_GATTC_DISCOVER_ST},
+/* BTA_GATTC_CI_CACHE_SAVE_EVT      */   {BTA_GATTC_CI_SAVE,            BTA_GATTC_DISCOVER_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_GATTC_ST_TBL)[BTA_GATTC_NUM_COLS];
+
+/* state table */
+const tBTA_GATTC_ST_TBL bta_gattc_st_tbl[] =
+{
+    bta_gattc_st_idle,
+    bta_gattc_st_w4_conn,
+    bta_gattc_st_connected,
+    bta_gattc_st_discover
+};
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+
+/* GATTC control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_GATTC_CB  bta_gattc_cb;
+#endif
+
+#if BTA_GATT_DEBUG == TRUE
+static char *gattc_evt_code(tBTA_GATTC_INT_EVT evt_code);
+static char *gattc_state_code(tBTA_GATTC_STATE state_code);
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_gattc_sm_execute
+**
+** Description      State machine event handling function for GATTC
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_gattc_sm_execute(tBTA_GATTC_CLCB *p_clcb, UINT16 event, tBTA_GATTC_DATA *p_data)
+{
+    tBTA_GATTC_ST_TBL     state_table;
+    UINT8               action;
+    int                 i;
+#if BTA_GATT_DEBUG == TRUE
+    tBTA_GATTC_STATE in_state = p_clcb->state;
+    UINT16         in_event = event;
+    APPL_TRACE_DEBUG4("bta_gattc_sm_execute: State 0x%02x [%s], Event 0x%x[%s]", in_state,
+                      gattc_state_code(in_state),
+                      in_event,
+                      gattc_evt_code(in_event));
+#endif
+
+
+    /* look up the state table for the current state */
+    state_table = bta_gattc_st_tbl[p_clcb->state];
+
+    event &= 0x00FF;
+
+    /* set next state */
+    p_clcb->state = state_table[event][BTA_GATTC_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < BTA_GATTC_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_GATTC_IGNORE)
+        {
+            (*bta_gattc_action[action])(p_clcb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+
+#if BTA_GATT_DEBUG == TRUE
+    if (in_state != p_clcb->state)
+    {
+        APPL_TRACE_DEBUG3("GATTC State Change: [%s] -> [%s] after Event [%s]",
+                          gattc_state_code(in_state),
+                          gattc_state_code(p_clcb->state),
+                          gattc_evt_code(in_event));
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_hdl_event
+**
+** Description      GATT client main event handling function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_hdl_event(BT_HDR *p_msg)
+{
+    tBTA_GATTC_CB *p_cb = &bta_gattc_cb;
+    tBTA_GATTC_CLCB *p_clcb = NULL;
+
+#if BTA_GATT_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_gattc_hdl_event: Event [%s]", gattc_evt_code(p_msg->event));
+#endif
+    switch (p_msg->event)
+    {
+        case BTA_GATTC_API_REG_EVT:
+            bta_gattc_register(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        case BTA_GATTC_INT_START_IF_EVT:
+            bta_gattc_start_if(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        case BTA_GATTC_API_DEREG_EVT:
+            bta_gattc_deregister(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        case BTA_GATTC_INT_DEREG_EVT:
+            bta_gattc_int_deregister(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        case BTA_GATTC_API_OPEN_EVT:
+            bta_gattc_process_api_open(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        case BTA_GATTC_API_CANCEL_OPEN_EVT:
+            bta_gattc_process_api_open_cancel(p_cb, (tBTA_GATTC_DATA *) p_msg);
+            break;
+
+        default:
+            if ((p_clcb = bta_gattc_find_clcb_by_conn_id(p_msg->layer_specific))
+                != NULL)
+            {
+                bta_gattc_sm_execute(p_clcb, p_msg->event, (tBTA_GATTC_DATA *) p_msg);
+            }
+            else
+            {
+                APPL_TRACE_ERROR1("Unknown conn ID: %d", p_msg->layer_specific);
+            }
+
+            break;
+    }
+
+
+    return(TRUE);
+}
+
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if BTA_GATT_DEBUG == TRUE
+
+/*******************************************************************************
+**
+** Function         gattc_evt_code
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+static char *gattc_evt_code(tBTA_GATTC_INT_EVT evt_code)
+{
+    switch (evt_code)
+    {
+        case BTA_GATTC_API_OPEN_EVT:
+            return "BTA_GATTC_API_OPEN_EVT";
+        case BTA_GATTC_INT_OPEN_FAIL_EVT:
+            return "BTA_GATTC_INT_OPEN_FAIL_EVT";
+        case BTA_GATTC_API_CANCEL_OPEN_EVT:
+            return "BTA_GATTC_API_CANCEL_OPEN_EVT";
+        case BTA_GATTC_INT_CANCEL_OPEN_OK_EVT:
+            return "BTA_GATTC_INT_CANCEL_OPEN_OK_EVT";
+        case BTA_GATTC_API_READ_EVT:
+            return "BTA_GATTC_API_READ_EVT";
+        case BTA_GATTC_API_WRITE_EVT:
+            return "BTA_GATTC_API_WRITE_EVT";
+        case BTA_GATTC_API_EXEC_EVT:
+            return "BTA_GATTC_API_EXEC_EVT";
+        case BTA_GATTC_API_CLOSE_EVT:
+            return "BTA_GATTC_API_CLOSE_EVT";
+        case BTA_GATTC_API_SEARCH_EVT:
+            return "BTA_GATTC_API_SEARCH_EVT";
+        case BTA_GATTC_API_CONFIRM_EVT:
+            return "BTA_GATTC_API_CONFIRM_EVT";
+        case BTA_GATTC_API_READ_MULTI_EVT:
+            return "BTA_GATTC_API_READ_MULTI_EVT";
+        case BTA_GATTC_INT_CONN_EVT:
+            return "BTA_GATTC_INT_CONN_EVT";
+        case BTA_GATTC_INT_DISCOVER_EVT:
+            return "BTA_GATTC_INT_DISCOVER_EVT";
+        case BTA_GATTC_DISCOVER_CMPL_EVT:
+            return "BTA_GATTC_DISCOVER_CMPL_EVT";
+        case BTA_GATTC_OP_CMPL_EVT:
+            return "BTA_GATTC_OP_CMPL_EVT";
+        case BTA_GATTC_INT_DISCONN_EVT:
+            return "BTA_GATTC_INT_DISCONN_EVT";
+        case BTA_GATTC_START_CACHE_EVT:
+            return "BTA_GATTC_START_CACHE_EVT";
+        case BTA_GATTC_CI_CACHE_OPEN_EVT:
+            return "BTA_GATTC_CI_CACHE_OPEN_EVT";
+        case BTA_GATTC_CI_CACHE_LOAD_EVT:
+            return "BTA_GATTC_CI_CACHE_LOAD_EVT";
+        case BTA_GATTC_CI_CACHE_SAVE_EVT:
+            return "BTA_GATTC_CI_CACHE_SAVE_EVT";
+        case BTA_GATTC_INT_START_IF_EVT:
+            return "BTA_GATTC_INT_START_IF_EVT";
+        case BTA_GATTC_API_REG_EVT:
+            return "BTA_GATTC_API_REG_EVT";
+        case BTA_GATTC_API_DEREG_EVT:
+            return "BTA_GATTC_API_DEREG_EVT";
+
+        default:
+            return "unknown GATTC event code";
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gattc_state_code
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+static char *gattc_state_code(tBTA_GATTC_STATE state_code)
+{
+    switch (state_code)
+    {
+        case BTA_GATTC_IDLE_ST:
+            return "GATTC_IDLE_ST";
+        case BTA_GATTC_W4_CONN_ST:
+            return "GATTC_W4_CONN_ST";
+        case BTA_GATTC_CONN_ST:
+            return "GATTC_CONN_ST";
+        case BTA_GATTC_DISCOVER_ST:
+            return "GATTC_DISCOVER_ST";
+        default:
+            return "unknown GATTC state code";
+    }
+}
+
+#endif  /* Debug Functions */
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gattc_utils.c b/bta/gatt/bta_gattc_utils.c
new file mode 100644
index 0000000..a36e26c
--- /dev/null
+++ b/bta/gatt/bta_gattc_utils.c
@@ -0,0 +1,664 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT client utility function.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+#include "utl.h"
+#include "gki.h"
+#include "bta_sys.h"
+#include "bta_gattc_int.h"
+#include "bd.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+
+static const UINT8  base_uuid[LEN_UUID_128] = {0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80,
+    0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+/*******************************************************************************
+**
+** Function         bta_gatt_convert_uuid16_to_uuid128
+**
+** Description      Convert a 16 bits UUID to be an standard 128 bits one.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+void bta_gatt_convert_uuid16_to_uuid128(UINT8 uuid_128[LEN_UUID_128], UINT16 uuid_16)
+{
+    UINT8   *p = &uuid_128[LEN_UUID_128 - 4];
+
+    memcpy (uuid_128, base_uuid, LEN_UUID_128);
+
+    UINT16_TO_STREAM(p, uuid_16);
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_uuid_compare
+**
+** Description      Compare two UUID to see if they are the same.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_uuid_compare (tBT_UUID src, tBT_UUID tar, BOOLEAN is_precise)
+{
+    UINT8  su[LEN_UUID_128], tu[LEN_UUID_128];
+    UINT8  *ps, *pt;
+
+    /* any of the UUID is unspecified */
+    if (src.len == 0 || tar.len == 0)
+    {
+        if (is_precise)
+            return FALSE;
+        else
+            return TRUE;
+    }
+
+    /* If both are 16-bit, we can do a simple compare */
+    if (src.len == 2 && tar.len == 2)
+    {
+        return src.uu.uuid16 == tar.uu.uuid16;
+    }
+
+    /* One or both of the UUIDs is 128-bit */
+    if (src.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        bta_gatt_convert_uuid16_to_uuid128(su, src.uu.uuid16);
+        ps = su;
+    }
+    else
+        ps = src.uu.uuid128;
+
+    if (tar.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        bta_gatt_convert_uuid16_to_uuid128(tu, tar.uu.uuid16);
+        pt = tu;
+    }
+    else
+        pt = tar.uu.uuid128;
+
+    return(memcmp(ps, pt, LEN_UUID_128) == 0);
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_cl_get_regcb
+**
+** Description      get registration control block by client interface.
+**
+** Returns          pointer to the regcb
+**
+*******************************************************************************/
+tBTA_GATTC_RCB * bta_gattc_cl_get_regcb(UINT8 client_if)
+{
+    UINT8   i = 0;
+    tBTA_GATTC_RCB  *p_clrcb = &bta_gattc_cb.cl_rcb[0];
+
+    for (i = 0; i < BTA_GATTC_CL_MAX; i ++, p_clrcb ++)
+    {
+        if (p_clrcb->in_use &&
+            p_clrcb->client_if == client_if)
+            return p_clrcb;
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_num_reg_app
+**
+** Description      find the number of registered application.
+**
+** Returns          pointer to the regcb
+**
+*******************************************************************************/
+UINT8 bta_gattc_num_reg_app(void)
+{
+    UINT8   i = 0, j = 0;
+
+    for (i = 0; i < BTA_GATTC_CL_MAX; i ++)
+    {
+        if (bta_gattc_cb.cl_rcb[i].in_use)
+            j ++;
+    }
+    return j;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_find_clcb_by_cif
+**
+** Description      get clcb by client interface and remote bd adddress
+**
+** Returns          pointer to the clcb
+**
+*******************************************************************************/
+tBTA_GATTC_CLCB * bta_gattc_find_clcb_by_cif (UINT8 client_if, BD_ADDR remote_bda)
+{
+    tBTA_GATTC_CLCB *p_clcb = &bta_gattc_cb.clcb[0];
+    UINT8   i;
+
+    for (i = 0; i < BTA_GATTC_CLCB_MAX; i ++, p_clcb ++)
+    {
+        if (p_clcb->in_use &&
+            p_clcb->p_rcb->client_if == client_if &&
+            p_clcb->p_srcb &&
+            bdcmp(p_clcb->p_srcb->server_bda, remote_bda) == 0)
+            return p_clcb;
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_find_clcb_by_conn_id
+**
+** Description      get clcb by connection ID
+**
+** Returns          pointer to the clcb
+**
+*******************************************************************************/
+tBTA_GATTC_CLCB * bta_gattc_find_clcb_by_conn_id (UINT16 conn_id)
+{
+    tBTA_GATTC_CLCB *p_clcb = &bta_gattc_cb.clcb[0];
+    UINT8 i;
+
+    for (i = 0; i < BTA_GATTC_CLCB_MAX; i ++, p_clcb ++)
+    {
+        if (p_clcb->in_use &&
+            p_clcb->bta_conn_id == conn_id)
+            return p_clcb;
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_clcb_alloc
+**
+** Description      allocate CLCB
+**
+** Returns          pointer to the clcb
+**
+*******************************************************************************/
+tBTA_GATTC_CLCB * bta_gattc_clcb_alloc(tBTA_GATTC_IF client_if, BD_ADDR remote_bda)
+{
+    UINT8               i_clcb = 0;
+    tBTA_GATTC_CLCB     *p_clcb = NULL;
+
+    for (i_clcb = 0; i_clcb < BTA_GATTC_CLCB_MAX; i_clcb++)
+    {
+        if (!bta_gattc_cb.clcb[i_clcb].in_use)
+        {
+#if BTA_GATT_DEBUG == TRUE
+            APPL_TRACE_DEBUG1("bta_gattc_clcb_alloc: found clcb[%d] available",i_clcb);
+#endif
+            p_clcb                  = &bta_gattc_cb.clcb[i_clcb];
+            p_clcb->in_use          = TRUE;
+            bdcpy(p_clcb->bda, remote_bda);
+
+            p_clcb->p_rcb = bta_gattc_cl_get_regcb(client_if);
+
+            if ((p_clcb->p_srcb = bta_gattc_find_srcb(remote_bda)) == NULL)
+                p_clcb->p_srcb      = bta_gattc_srcb_alloc(remote_bda);
+
+            if (p_clcb->p_rcb != NULL && p_clcb->p_srcb != NULL)
+            {
+                p_clcb->p_srcb->num_clcb ++;
+                p_clcb->p_rcb->num_clcb ++;
+            }
+            else
+            {
+                /* release this clcb if clcb or srcb allocation failed */
+                p_clcb->in_use = FALSE;
+                p_clcb = NULL;
+            }
+            break;
+        }
+    }
+    return p_clcb;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_find_alloc_clcb
+**
+** Description      find or allocate CLCB if not found.
+**
+** Returns          pointer to the clcb
+**
+*******************************************************************************/
+tBTA_GATTC_CLCB *bta_gattc_find_alloc_clcb(tBTA_GATTC_IF client_if, BD_ADDR remote_bda)
+{
+    tBTA_GATTC_CLCB *p_clcb ;
+
+    if ((p_clcb = bta_gattc_find_clcb_by_cif(client_if, remote_bda)) == NULL)
+    {
+        p_clcb = bta_gattc_clcb_alloc(client_if, remote_bda);
+    }
+    return p_clcb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_clcb_dealloc
+**
+** Description      Deallocte a clcb
+**
+** Returns          pointer to the clcb
+**
+*******************************************************************************/
+void bta_gattc_clcb_dealloc(tBTA_GATTC_CLCB *p_clcb)
+{
+
+    if (p_clcb)
+    {
+        if (p_clcb->p_srcb->num_clcb)
+            p_clcb->p_srcb->num_clcb --;
+
+        if (p_clcb->p_rcb->num_clcb)
+            p_clcb->p_rcb->num_clcb --;
+
+        utl_freebuf((void **)&p_clcb->p_q_cmd);
+
+        APPL_TRACE_ERROR2("bta_gattc_clcb_dealloc in_use=%d conn_id=%d",p_clcb->in_use, p_clcb->bta_conn_id);
+        memset(p_clcb, 0, sizeof(tBTA_GATTC_CLCB));
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("bta_gattc_clcb_dealloc p_clcb=NULL");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_find_srcb
+**
+** Description      find server cache by remote bd address
+**
+** Returns          pointer to the server cache.
+**
+*******************************************************************************/
+tBTA_GATTC_SERV * bta_gattc_find_srcb(BD_ADDR bda)
+{
+    tBTA_GATTC_SERV *p_srcb = &bta_gattc_cb.known_server[0];
+    UINT8   i;
+
+    for (i = 0; i < BTA_GATTC_KNOWN_SR_MAX; i ++, p_srcb ++)
+    {
+        if (p_srcb->in_use && bdcmp(p_srcb->server_bda, bda) == 0)
+            return p_srcb;
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_find_scb_by_cid
+**
+** Description      find server control block by connection ID
+**
+** Returns          pointer to the server cache.
+**
+*******************************************************************************/
+tBTA_GATTC_SERV * bta_gattc_find_scb_by_cid (UINT16 conn_id)
+{
+    tBTA_GATTC_CLCB *p_clcb = bta_gattc_find_clcb_by_conn_id(conn_id);
+
+    if (p_clcb)
+        return p_clcb->p_srcb;
+    else
+        return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_srcb_alloc
+**
+** Description      allocate server cache control block
+**
+** Returns          pointer to the server cache.
+**
+*******************************************************************************/
+tBTA_GATTC_SERV * bta_gattc_srcb_alloc(BD_ADDR bda)
+{
+    tBTA_GATTC_SERV *p_tcb = &bta_gattc_cb.known_server[0],
+                             *p_recycle = NULL;
+    BOOLEAN         found = FALSE;
+    UINT8           i;
+
+    for (i = 0; i < BTA_GATTC_KNOWN_SR_MAX; i ++, p_tcb ++)
+    {
+        if (!p_tcb->in_use)
+        {
+            found = TRUE;
+            break;
+        }
+        else if (!p_tcb->connected)
+        {
+            p_recycle = p_tcb;
+        }
+    }
+
+    /* if not found, try to recycle one known device */
+    if (!found && !p_recycle)
+        p_tcb = NULL;
+    else if (p_recycle)
+        p_tcb = p_recycle;
+
+    if (p_tcb != NULL)
+    {
+        while (p_tcb->cache_buffer.p_first)
+            GKI_freebuf (GKI_dequeue (&p_tcb->cache_buffer));
+
+        utl_freebuf((void **)&p_tcb->p_srvc_list);
+        memset(p_tcb, 0 , sizeof(tBTA_GATTC_SERV));
+
+        p_tcb->in_use = TRUE;
+        bdcpy(p_tcb->server_bda, bda);
+    }
+    return p_tcb;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_enqueue
+**
+** Description      enqueue a client request in clcb.
+**
+** Returns          success or failure.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_enqueue(tBTA_GATTC_CLCB *p_clcb, tBTA_GATTC_DATA *p_data)
+{
+    BOOLEAN in_q = FALSE;
+
+    if (p_clcb->p_q_cmd == NULL)
+    {
+        p_clcb->p_q_cmd = (tBTA_GATTC_DATA *)GKI_getbuf(sizeof(tBTA_GATTC_DATA));
+
+        if (p_data)
+            memcpy(p_clcb->p_q_cmd, p_data, sizeof(tBTA_GATTC_DATA));
+
+        in_q = TRUE;
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("already has a pending command!!");
+        /* skip the callback now. ----- need to send callback ? */
+    }
+    return in_q;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_pack_attr_uuid
+**
+** Description      pack UUID into a stream.
+**
+** Returns
+**
+*******************************************************************************/
+void bta_gattc_pack_attr_uuid(tBTA_GATTC_CACHE_ATTR   *p_attr, tBT_UUID *p_uuid)
+{
+    UINT8 *pp = (UINT8 *)p_attr->p_uuid;
+
+    memset(p_uuid, 0, sizeof(tBT_UUID));
+
+    p_uuid->len = p_attr->uuid_len;
+
+    if (p_attr->uuid_len == LEN_UUID_16)
+    {
+        STREAM_TO_UINT16(p_uuid->uu.uuid16, pp);
+    }
+    else
+    {
+        memcpy(p_uuid->uu.uuid128, pp, LEN_UUID_128);
+    }
+
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_check_notif_registry
+**
+** Description      check if the service notificaition has been registered.
+**
+** Returns
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_check_notif_registry(tBTA_GATTC_RCB  *p_clreg, tBTA_GATTC_SERV *p_srcb,
+                                       tBTA_GATTC_NOTIFY  *p_notify)
+{
+    UINT8           i;
+
+    for (i = 0 ; i < BTA_GATTC_NOTIF_REG_MAX; i ++)
+    {
+        if (p_clreg->notif_reg[i].in_use &&
+            bdcmp(p_clreg->notif_reg[i].remote_bda, p_srcb->server_bda) == 0 &&
+            (bta_gattc_uuid_compare(p_clreg->notif_reg[i].char_id.srvc_id.id.uuid, p_notify->char_id.srvc_id.id.uuid, FALSE) &&
+              p_clreg->notif_reg[i].char_id.srvc_id.id.inst_id == p_notify->char_id.srvc_id.id.inst_id &&
+              p_clreg->notif_reg[i].char_id.srvc_id.is_primary == p_notify->char_id.srvc_id.is_primary  &&
+              bta_gattc_uuid_compare(p_clreg->notif_reg[i].char_id.char_id.uuid, p_notify->char_id.char_id.uuid, FALSE) &&
+              p_clreg->notif_reg[i].char_id.char_id.inst_id == p_notify->char_id.char_id.inst_id)
+           )
+        {
+            APPL_TRACE_DEBUG0("Notification registered!");
+            return TRUE;
+        }
+    }
+    return FALSE;
+
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_clear_notif_registration
+**
+** Description      clear up the notification registration information by BD_ADDR.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void bta_gattc_clear_notif_registration(UINT16 conn_id)
+{
+    BD_ADDR             remote_bda;
+    tBTA_GATTC_IF       gatt_if;
+    tBTA_GATTC_RCB      *p_clrcb ;
+    UINT8       i;
+
+    if (GATT_GetConnectionInfor(conn_id, &gatt_if, remote_bda))
+    {
+        if ((p_clrcb = bta_gattc_cl_get_regcb(gatt_if)) != NULL)
+        {
+            for (i = 0 ; i < BTA_GATTC_NOTIF_REG_MAX; i ++)
+            {
+                if (p_clrcb->notif_reg[i].in_use && !bdcmp(p_clrcb->notif_reg[i].remote_bda, remote_bda))
+                    memset(&p_clrcb->notif_reg[i], 0, sizeof(tBTA_GATTC_NOTIF_REG));
+            }
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("can not clear indication/notif registration for unknown app");
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gattc_pack_cb_data
+**
+** Description      pack the data from read response into callback data structure.
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_GATT_STATUS bta_gattc_pack_read_cb_data(tBTA_GATTC_SERV *p_srcb, tBT_UUID descr_uuid,
+                                             tGATT_VALUE *p_attr, tBTA_GATT_READ_VAL *p_value)
+{
+    UINT8                   i = 0, *pp = p_attr->value;
+    tBT_UUID                uuid = {LEN_UUID_16, {GATT_UUID_CHAR_AGG_FORMAT}};
+    UINT16                  handle;
+    tBTA_GATT_STATUS        status = BTA_GATT_OK;
+
+    /* GATT_UUID_CHAR_AGG_FORMAT */
+    if (bta_gattc_uuid_compare (uuid, descr_uuid, TRUE))
+    {
+        while (p_attr->len >= 2 && i < BTA_GATTC_MULTI_MAX)
+        {
+            STREAM_TO_UINT16(handle, pp);
+
+            if (bta_gattc_handle2id(p_srcb,
+                                    handle,
+                                    &p_value->aggre_value.pre_format[i].char_id.srvc_id,
+                                    &p_value->aggre_value.pre_format[i].char_id.char_id,
+                                    &p_value->aggre_value.pre_format[i].descr_type) == FALSE)
+            {
+                status = BTA_GATT_INTERNAL_ERROR;
+                APPL_TRACE_ERROR1("can not map to GATT ID. handle = 0x%04x", handle);
+                break;
+            }
+            i ++;
+            p_attr->len -= 2;
+        }
+        p_value->aggre_value.num_pres_fmt = i;
+    }
+    else
+    {
+        /* all others, take as raw format */
+        p_value->unformat.len = p_attr->len;
+        p_value->unformat.p_value = p_attr->value;
+    }
+    return status;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_mark_bg_conn
+**
+** Description      mark background connection status when a bg connection is initiated
+**                  or terminated.
+**
+** Returns          TRUE if success; FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_mark_bg_conn (tBTA_GATTC_IF client_if,  BD_ADDR remote_bda, BOOLEAN add)
+{
+    tBTA_GATTC_BG_TCK   *p_bg_tck = &bta_gattc_cb.bg_track[0];
+    UINT8   i = 0;
+
+    for (i = 0; i < BTA_GATTC_KNOWN_SR_MAX; i ++, p_bg_tck ++)
+    {
+        if (p_bg_tck->in_use &&
+            bdcmp(p_bg_tck->remote_bda, remote_bda) == 0)
+        {
+            if (add)
+                /* mask on the cif bit */
+                p_bg_tck->cif_mask |= (1 <<(client_if - 1));
+            else
+                p_bg_tck->cif_mask &= (~(1 <<(client_if - 1)));
+
+            return TRUE;
+        }
+    }
+    if (!add)
+    {
+        APPL_TRACE_ERROR0("Do not find the bg connection mask for the remote device");
+        return FALSE;
+    }
+    else /* adding a new device mask */
+    {
+        for (i = 0, p_bg_tck = &bta_gattc_cb.bg_track[0];
+             i < BTA_GATTC_KNOWN_SR_MAX; i ++, p_bg_tck ++)
+        {
+            if (!p_bg_tck->in_use)
+            {
+                p_bg_tck->in_use = TRUE;
+                bdcpy(p_bg_tck->remote_bda, remote_bda);
+                p_bg_tck->cif_mask = (1 <<(client_if - 1));
+                return TRUE;
+            }
+        }
+        APPL_TRACE_ERROR0("no available space to mark the bg connection status");
+        return FALSE;
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_check_bg_conn
+**
+** Description      check if this is a background connection background connection.
+**
+** Returns          TRUE if success; FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_gattc_check_bg_conn (tBTA_GATTC_IF client_if,  BD_ADDR remote_bda)
+{
+    tBTA_GATTC_BG_TCK   *p_bg_tck = &bta_gattc_cb.bg_track[0];
+    UINT8       i = 0;
+    BOOLEAN     is_bg_conn = FALSE;
+
+    for (i = 0; i < BTA_GATTC_KNOWN_SR_MAX; i ++, p_bg_tck ++)
+    {
+        if (p_bg_tck->in_use &&
+            bdcmp(p_bg_tck->remote_bda, remote_bda) == 0)
+        {
+            if ((p_bg_tck->cif_mask &(1 <<(client_if - 1))) != 0)
+                is_bg_conn = TRUE;
+            break;
+        }
+    }
+    return is_bg_conn;
+}
+/*******************************************************************************
+**
+** Function         bta_gattc_send_open_cback
+**
+** Description      send open callback
+**
+** Returns
+**
+*******************************************************************************/
+void bta_gattc_send_open_cback( tBTA_GATTC_RCB *p_clreg, tBTA_GATT_STATUS status,
+                                BD_ADDR remote_bda, UINT16 conn_id)
+{
+    tBTA_GATTC      cb_data;
+
+    if (p_clreg->p_cback)
+    {
+        memset(&cb_data, 0, sizeof(tBTA_GATTC));
+
+        cb_data.open.status = status;
+        cb_data.open.client_if = p_clreg->client_if;
+        cb_data.open.conn_id = conn_id;
+        bdcpy(cb_data.open.remote_bda, remote_bda);
+
+        (*p_clreg->p_cback)(BTA_GATTC_OPEN_EVT, &cb_data);
+    }
+}
+
+
+
+
+
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gatts_act.c b/bta/gatt/bta_gatts_act.c
new file mode 100644
index 0000000..1b47598
--- /dev/null
+++ b/bta/gatt/bta_gatts_act.c
@@ -0,0 +1,798 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT Server action functions for the state
+ *  machine.
+ *
+ ******************************************************************************/
+
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include "utl.h"
+#include "gki.h"
+#include "bta_sys.h"
+#include "bta_gatts_int.h"
+#include "bta_gatts_co.h"
+
+#include <string.h>
+
+static void bta_gatts_nv_save_cback(BOOLEAN is_saved, tGATTS_HNDL_RANGE *p_hndl_range);
+static BOOLEAN bta_gatts_nv_srv_chg_cback(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ *p_req, tGATTS_SRV_CHG_RSP *p_rsp);
+
+static void bta_gatts_conn_cback (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id, BOOLEAN connected, tGATT_DISCONN_REASON reason);
+static void bta_gatts_send_request_cback (UINT16 conn_id,
+                                          UINT32 trans_id,
+                                          tGATTS_REQ_TYPE req_type, tGATTS_DATA *p_data);
+static tGATT_CBACK bta_gatts_cback =
+{
+    bta_gatts_conn_cback,
+    NULL,
+    NULL,
+    NULL,
+    bta_gatts_send_request_cback
+};
+
+tGATT_APPL_INFO bta_gatts_nv_cback =
+{
+    bta_gatts_nv_save_cback,
+    bta_gatts_nv_srv_chg_cback
+};
+
+/*******************************************************************************
+**
+** Function         bta_gatts_nv_save_cback
+**
+** Description      NV save callback function.
+**
+** Parameter        is_add: true is to add a handle range; otherwise is to delete.
+** Returns          none.
+**
+*******************************************************************************/
+static void bta_gatts_nv_save_cback(BOOLEAN is_add, tGATTS_HNDL_RANGE *p_hndl_range)
+{
+    bta_gatts_co_update_handle_range(is_add, (tBTA_GATTS_HNDL_RANGE *)p_hndl_range);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gatts_nv_srv_chg_cback
+**
+** Description      NV save callback function.
+**
+** Parameter        is_add: true is to add a handle range; otherwise is to delete.
+** Returns          none.
+**
+*******************************************************************************/
+static BOOLEAN bta_gatts_nv_srv_chg_cback(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ *p_req, tGATTS_SRV_CHG_RSP *p_rsp)
+{
+    return bta_gatts_co_srv_chg((tBTA_GATTS_SRV_CHG_CMD) cmd,
+                                (tBTA_GATTS_SRV_CHG_REQ *) p_req,
+                                (tBTA_GATTS_SRV_CHG_RSP *) p_rsp);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gatts_enable
+**
+** Description      enable BTA GATTS module.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_enable(tBTA_GATTS_CB *p_cb)
+{
+    UINT8 index=0;
+    tBTA_GATTS_HNDL_RANGE handle_range;
+
+    p_cb->enabled = TRUE;
+
+    APPL_TRACE_DEBUG0("bta_gatts_enable");
+    while ( bta_gatts_co_load_handle_range(index, &handle_range))
+    {
+        GATTS_AddHandleRange((tGATTS_HNDL_RANGE *)&handle_range);
+        memset(&handle_range, 0, sizeof(tGATTS_HNDL_RANGE));
+        index++;
+    }
+
+    APPL_TRACE_DEBUG1("bta_gatts_enable: num of handle range added=%d", index);
+
+    if (!GATTS_NVRegister(&bta_gatts_nv_cback))
+    {
+        APPL_TRACE_ERROR0("BTA GATTS NV register failed.");
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_register
+**
+** Description      register an application.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_register(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg)
+{
+    tBTA_GATTS_INT_START_IF  *p_buf;
+    tBTA_GATTS               cb_data;
+    tBTA_GATT_STATUS         status = BTA_GATT_OK;
+    UINT8                    i, first_unuse = 0xff;
+
+    if (!p_cb->enabled)
+        bta_gatts_enable(p_cb);
+
+
+    for (i = 0; i < BTA_GATTS_MAX_APP_NUM; i ++)
+    {
+        if (p_cb->rcb[i].in_use)
+        {
+            if (bta_gatts_uuid_compare(p_cb->rcb[i].app_uuid, p_msg->api_reg.app_uuid))
+            {
+                APPL_TRACE_ERROR0("application already registered.");
+                status = BTA_GATT_DUP_REG;
+                break;
+            }
+        }
+    }
+
+    if (status == BTA_GATT_OK)
+    {
+        for (i = 0; i < BTA_GATTS_MAX_APP_NUM; i ++)
+        {
+            if (first_unuse == 0xff && !p_cb->rcb[i].in_use)
+            {
+                first_unuse = i;
+                break;
+            }
+        }
+
+        cb_data.reg_oper.server_if = BTA_GATTS_INVALID_IF;
+// btla-specific ++
+        memcpy(&cb_data.reg_oper.uuid, &p_msg->api_reg.app_uuid, sizeof(tBT_UUID));
+// btla-specific --
+        if (first_unuse != 0xff)
+        {
+            APPL_TRACE_ERROR1("register application first_unuse rcb_idx = %d", first_unuse);
+
+            p_cb->rcb[first_unuse].in_use = TRUE;
+            p_cb->rcb[first_unuse].p_cback = p_msg->api_reg.p_cback;
+            memcpy(&p_cb->rcb[first_unuse].app_uuid, &p_msg->api_reg.app_uuid, sizeof(tBT_UUID));
+            cb_data.reg_oper.server_if      =
+            p_cb->rcb[first_unuse].gatt_if  = GATT_Register(&p_msg->api_reg.app_uuid, &bta_gatts_cback);
+            if ( !p_cb->rcb[first_unuse].gatt_if)
+            {
+                status = BTA_GATT_NO_RESOURCES;
+            }
+            else
+            {
+                if ((p_buf = (tBTA_GATTS_INT_START_IF *) GKI_getbuf(sizeof(tBTA_GATTS_INT_START_IF))) != NULL)
+                {
+                    p_buf->hdr.event    = BTA_GATTS_INT_START_IF_EVT;
+                    p_buf->server_if    = p_cb->rcb[first_unuse].gatt_if;
+
+                    bta_sys_sendmsg(p_buf);
+                }
+                else
+                {
+                    status = BTA_GATT_NO_RESOURCES;
+                    memset( &p_cb->rcb[first_unuse], 0 , sizeof(tBTA_GATTS_RCB));
+                }
+            }
+        }
+        else
+        {
+            status = BTA_GATT_NO_RESOURCES;
+        }
+
+    }
+    cb_data.reg_oper.status = status;
+    if (p_msg->api_reg.p_cback)
+        (*p_msg->api_reg.p_cback)(BTA_GATTS_REG_EVT, &cb_data);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gatts_start_if
+**
+** Description      start an application interface.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_start_if(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg)
+{
+    if (bta_gatts_find_app_rcb_by_app_if(p_msg->int_start_if.server_if))
+    {
+        GATT_StartIf(p_msg->int_start_if.server_if);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Unable to start app.: Unknown interface =%d",p_msg->int_start_if.server_if );
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_deregister
+**
+** Description      deregister an application.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_deregister(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg)
+{
+    tBTA_GATT_STATUS    status = BTA_GATT_ERROR;
+    tBTA_GATTS_CBACK    *p_cback = NULL;
+    UINT8               i;
+    tBTA_GATTS          cb_data;
+
+    cb_data.reg_oper.server_if = p_msg->api_dereg.server_if;
+    cb_data.reg_oper.status = status;
+
+    for (i = 0; i < BTA_GATTS_MAX_APP_NUM; i ++)
+    {
+        if (p_cb->rcb[i].in_use && p_cb->rcb[i].gatt_if == p_msg->api_dereg.server_if)
+        {
+            p_cback = p_cb->rcb[i].p_cback;
+            status = BTA_GATT_OK;
+
+            /* deregister the app */
+            GATT_Deregister(p_cb->rcb[i].gatt_if);
+
+            /* reset cb */
+            memset(&p_cb->rcb[i], 0, sizeof(tBTA_GATTS_RCB));
+            cb_data.reg_oper.status = status;
+            break;
+        }
+    }
+
+    if (p_cback)
+    {
+        (*p_cback)(BTA_GATTS_DEREG_EVT, &cb_data);
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("application not registered.");
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_create_srvc
+**
+** Description      action function to create a service.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_create_srvc(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+    UINT8               rcb_idx;
+    tBTA_GATTS          cb_data;
+    UINT8               srvc_idx;
+    UINT16              service_id = 0;
+    //tBTA_GATTS_HNDL_RANGE   handle_range;
+
+    cb_data.create.status = BTA_GATT_ERROR;
+
+    rcb_idx = bta_gatts_find_app_rcb_idx_by_app_if(p_cb, p_msg->api_create_svc.server_if);
+
+    APPL_TRACE_ERROR1("create service rcb_idx = %d", rcb_idx);
+
+    if (rcb_idx != BTA_GATTS_INVALID_APP)
+    {
+        if ((srvc_idx = bta_gatts_alloc_srvc_cb(p_cb, rcb_idx)) != BTA_GATTS_INVALID_APP)
+        {
+            /* create the service now */
+            service_id = GATTS_CreateService (p_cb->rcb[rcb_idx].gatt_if,
+                                              &p_msg->api_create_svc.service_uuid,
+                                              p_msg->api_create_svc.inst,
+                                              p_msg->api_create_svc.num_handle,
+                                              p_msg->api_create_svc.is_pri);
+
+            if (service_id != 0)
+            {
+                memcpy(&p_cb->srvc_cb[srvc_idx].service_uuid, &p_msg->api_create_svc.service_uuid, sizeof(tBT_UUID));
+                p_cb->srvc_cb[srvc_idx].service_id   = service_id;
+                p_cb->srvc_cb[srvc_idx].inst_num     = p_msg->api_create_svc.inst;
+                p_cb->srvc_cb[srvc_idx].idx          = srvc_idx;
+
+                cb_data.create.status      = BTA_GATT_OK;
+                cb_data.create.service_id  = service_id;
+// btla-specific ++
+                cb_data.create.is_primary  = p_msg->api_create_svc.is_pri;
+// btla-specific --
+                cb_data.create.server_if   = p_cb->rcb[rcb_idx].gatt_if;
+            }
+            else
+            {
+                cb_data.status  = BTA_GATT_ERROR;
+                memset(&p_cb->srvc_cb[srvc_idx], 0, sizeof(tBTA_GATTS_SRVC_CB));
+                APPL_TRACE_ERROR0("service creation failed.");
+            }
+// btla-specific ++
+            memcpy(&cb_data.create.uuid, &p_msg->api_create_svc.service_uuid, sizeof(tBT_UUID));
+            cb_data.create.svc_instance= p_msg->api_create_svc.inst;
+// btla-specific --
+        }
+        if (p_cb->rcb[rcb_idx].p_cback)
+            (* p_cb->rcb[rcb_idx].p_cback)(BTA_GATTS_CREATE_EVT, &cb_data);
+    }
+    else /* application not registered */
+    {
+        APPL_TRACE_ERROR0("Application not registered");
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_add_include_srvc
+**
+** Description      action function to add an included service.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_add_include_srvc(tBTA_GATTS_SRVC_CB *p_srvc_cb,tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB  *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    UINT16          attr_id = 0;
+    tBTA_GATTS      cb_data;
+
+    attr_id = GATTS_AddIncludeService(p_msg->api_add_incl_srvc.hdr.layer_specific,
+                                      p_msg->api_add_incl_srvc.included_service_id);
+
+    cb_data.add_result.server_if = p_rcb->gatt_if;
+    cb_data.add_result.service_id = p_msg->api_add_incl_srvc.hdr.layer_specific;
+    cb_data.add_result.attr_id = attr_id;
+
+    if (attr_id)
+    {
+        cb_data.add_result.status = BTA_GATT_OK;
+    }
+    else
+    {
+        cb_data.add_result.status = BTA_GATT_ERROR;
+    }
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_ADD_INCL_SRVC_EVT, &cb_data);
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_add_char
+**
+** Description      action function to add characteristic.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_add_char(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB  *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    UINT16          attr_id = 0;
+    tBTA_GATTS      cb_data;
+
+    attr_id = GATTS_AddCharacteristic(p_msg->api_add_char.hdr.layer_specific,
+                                      &p_msg->api_add_char.char_uuid,
+                                      p_msg->api_add_char.perm,
+                                      p_msg->api_add_char.property);
+    cb_data.add_result.server_if = p_rcb->gatt_if;
+    cb_data.add_result.service_id = p_msg->api_add_incl_srvc.hdr.layer_specific;
+    cb_data.add_result.attr_id = attr_id;
+// btla-specific ++
+    memcpy(&cb_data.add_result.char_uuid, &p_msg->api_add_char.char_uuid, sizeof(tBT_UUID));
+// btla-specific --
+
+    if (attr_id)
+    {
+        cb_data.add_result.status = BTA_GATT_OK;
+    }
+    else
+    {
+        cb_data.add_result.status = BTA_GATT_ERROR;
+    }
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_ADD_CHAR_EVT, &cb_data);
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_add_char_descr
+**
+** Description      action function to add characteristic descriptor.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_add_char_descr(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB  *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    UINT16          attr_id = 0;
+    tBTA_GATTS      cb_data;
+
+    attr_id = GATTS_AddCharDescriptor(p_msg->api_add_char_descr.hdr.layer_specific,
+                                       p_msg->api_add_char_descr.perm,
+                                       &p_msg->api_add_char_descr.descr_uuid);
+
+    cb_data.add_result.server_if = p_rcb->gatt_if;
+    cb_data.add_result.service_id = p_msg->api_add_incl_srvc.hdr.layer_specific;
+    cb_data.add_result.attr_id = attr_id;
+// btla-specific ++
+    memcpy(&cb_data.add_result.char_uuid, &p_msg->api_add_char_descr.descr_uuid, sizeof(tBT_UUID));
+// btla-specific --
+
+    if (attr_id)
+    {
+        cb_data.add_result.status = BTA_GATT_OK;
+    }
+    else
+    {
+        cb_data.add_result.status = BTA_GATT_ERROR;
+    }
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_ADD_CHAR_DESCR_EVT, &cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_delete_service
+**
+** Description      action function to delete a service.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_delete_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    tBTA_GATTS      cb_data;
+
+    cb_data.srvc_oper.server_if = p_rcb->gatt_if;
+    cb_data.srvc_oper.service_id = p_msg->api_add_incl_srvc.hdr.layer_specific;
+
+    if (GATTS_DeleteService(p_rcb->gatt_if,
+                            &p_srvc_cb->service_uuid,
+                            p_srvc_cb->inst_num))
+    {
+        cb_data.srvc_oper.status = BTA_GATT_OK;
+        memset(p_srvc_cb, 0, sizeof(tBTA_GATTS_SRVC_CB));
+    }
+    else
+    {
+        cb_data.srvc_oper.status = BTA_GATT_ERROR;
+    }
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_DELELTE_EVT, &cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_start_service
+**
+** Description      action function to start a service.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_start_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    tBTA_GATTS      cb_data;
+
+    cb_data.srvc_oper.server_if = p_rcb->gatt_if;
+    cb_data.srvc_oper.service_id = p_msg->api_add_incl_srvc.hdr.layer_specific;
+
+    if (GATTS_StartService(p_rcb->gatt_if,
+                           p_srvc_cb->service_id,
+                           p_msg->api_start.transport) ==  GATT_SUCCESS)
+    {
+        APPL_TRACE_DEBUG1("bta_gatts_start_service service_id= %d", p_srvc_cb->service_id);
+        cb_data.srvc_oper.status = BTA_GATT_OK;
+    }
+    else
+    {
+        cb_data.srvc_oper.status = BTA_GATT_ERROR;
+    }
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_START_EVT, &cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_stop_service
+**
+** Description      action function to stop a service.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_stop_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB *p_rcb = &bta_gatts_cb.rcb[p_srvc_cb->rcb_idx];
+    tBTA_GATTS      cb_data;
+
+    GATTS_StopService(p_srvc_cb->service_id);
+    cb_data.srvc_oper.server_if = p_rcb->gatt_if;
+    cb_data.srvc_oper.service_id = p_srvc_cb->service_id;
+    cb_data.srvc_oper.status = BTA_GATT_OK;
+    APPL_TRACE_ERROR1("bta_gatts_stop_service service_id= %d", p_srvc_cb->service_id);
+
+    if (p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_STOP_EVT, &cb_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_send_rsp
+**
+** Description      GATTS send response.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_send_rsp (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+
+    if (GATTS_SendRsp (p_msg->api_rsp.hdr.layer_specific,
+                        p_msg->api_rsp.trans_id,
+                        p_msg->api_rsp.status,
+                        (tGATTS_RSP *)p_msg->api_rsp.p_rsp) != GATT_SUCCESS)
+    {
+        APPL_TRACE_ERROR0("Sending response failed");
+    }
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_send_rsp
+**
+** Description      GATTS send response.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_indicate_handle (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_SRVC_CB  *p_srvc_cb;
+    tBTA_GATT_STATUS    status;
+
+
+    p_srvc_cb = bta_gatts_find_srvc_cb_by_attr_id (p_cb, p_msg->api_indicate.attr_id);
+
+    if (p_srvc_cb )
+    {
+        if (p_msg->api_indicate.need_confirm)
+
+            status = GATTS_HandleValueIndication (p_msg->api_indicate.hdr.layer_specific,
+                                                  p_msg->api_indicate.attr_id,
+                                                  p_msg->api_indicate.len,
+                                                  p_msg->api_indicate.value);
+        else
+            status = GATTS_HandleValueNotification (p_msg->api_indicate.hdr.layer_specific,
+                                                    p_msg->api_indicate.attr_id,
+                                                    p_msg->api_indicate.len,
+                                                    p_msg->api_indicate.value);
+
+        if (status != GATT_SUCCESS &&
+            p_msg->api_indicate.need_confirm &&
+            p_cb->rcb[p_srvc_cb->rcb_idx].p_cback)
+        {
+            (*p_cb->rcb[p_srvc_cb->rcb_idx].p_cback)(BTA_GATTS_CONF_EVT, (tBTA_GATTS *)&status);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Not an registered servce attribute ID: 0x%04x", p_msg->api_indicate.attr_id);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gatts_open
+**
+** Description
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_open (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB      *p_rcb=NULL;
+    tBTA_GATT_STATUS    status= BTA_GATT_ERROR;
+
+
+    if ((p_rcb = bta_gatts_find_app_rcb_by_app_if(p_msg->api_open.server_if)) != NULL)
+    {
+        if (GATT_Connect(p_rcb->gatt_if, p_msg->api_open.remote_bda, p_msg->api_open.is_direct))
+        {
+            status = BTA_GATT_OK;
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Inavlide server_if=%d", p_msg->api_open.server_if);
+    }
+
+    if (p_rcb && p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_OPEN_EVT,  (tBTA_GATTS *)&status);
+
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_cancel_open
+**
+** Description
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_cancel_open (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB      *p_rcb;
+    tBTA_GATT_STATUS    status= BTA_GATT_ERROR;
+
+    if ((p_rcb = bta_gatts_find_app_rcb_by_app_if(p_msg->api_cancel_open.server_if)) != NULL)
+    {
+        if (!GATT_CancelConnect(p_rcb->gatt_if, p_msg->api_cancel_open.remote_bda, p_msg->api_cancel_open.is_direct))
+        {
+            APPL_TRACE_ERROR0("bta_gatts_cancel_open failed for open request");
+        }
+        else
+        {
+            status= BTA_GATT_OK;
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Inavlide server_if=%d", p_msg->api_cancel_open.server_if);
+    }
+
+    if (p_rcb && p_rcb->p_cback)
+        (*p_rcb->p_cback)(BTA_GATTS_CANCEL_OPEN_EVT,  (tBTA_GATTS *)&status);
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_close
+**
+** Description
+**
+** Returns          none.
+**
+*******************************************************************************/
+void bta_gatts_close (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg)
+{
+    tBTA_GATTS_RCB     *p_rcb;
+    tBTA_GATT_STATUS    status= BTA_GATT_ERROR;
+    tGATT_IF            gatt_if;
+    BD_ADDR             remote_bda;
+
+    if (GATT_GetConnectionInfor(p_msg->hdr.layer_specific, &gatt_if, remote_bda))
+    {
+        if (GATT_Disconnect(p_msg->hdr.layer_specific) != GATT_SUCCESS)
+        {
+            APPL_TRACE_ERROR1("bta_gatts_close fail conn_id=%d", p_msg->hdr.layer_specific);
+        }
+        else
+        {
+            status= BTA_GATT_OK;
+        }
+
+        p_rcb = bta_gatts_find_app_rcb_by_app_if(gatt_if);
+
+        if (p_rcb && p_rcb->p_cback)
+            (*p_rcb->p_cback)(BTA_GATTS_CLOSE_EVT,  (tBTA_GATTS *)&status);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Unknown connection ID: %d", p_msg->hdr.layer_specific);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_gatts_request_cback
+**
+** Description      GATTS attribute request callback.
+**
+** Returns          none.
+**
+*******************************************************************************/
+static void bta_gatts_send_request_cback (UINT16 conn_id,
+                                          UINT32 trans_id,
+                                          tGATTS_REQ_TYPE req_type, tGATTS_DATA *p_data)
+{
+    tBTA_GATTS          cb_data;
+    tBTA_GATTS_RCB     *p_rcb;
+    tGATT_IF            gatt_if;
+
+    memset(&cb_data, 0 , sizeof(tBTA_GATTS));
+
+    if (GATT_GetConnectionInfor(conn_id, &gatt_if, cb_data.req_data.remote_bda))
+    {
+        p_rcb = bta_gatts_find_app_rcb_by_app_if(gatt_if);
+
+        APPL_TRACE_DEBUG3 ("bta_gatts_send_request_cback conn_id=%d trans_id=%d req_type=%d", conn_id, trans_id, req_type);
+
+        if (p_rcb && p_rcb->p_cback)
+        {
+            cb_data.req_data.conn_id    = conn_id;
+            cb_data.req_data.trans_id   = trans_id;
+            cb_data.req_data.p_data     = (tBTA_GATTS_REQ_DATA *)p_data;
+
+            (*p_rcb->p_cback)(req_type,  &cb_data);
+        }
+        else
+        {
+            APPL_TRACE_ERROR1("connection request on gatt_if[%d] is not interested", gatt_if);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("request received on unknown connectino ID: %d", conn_id);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_gatts_conn_cback
+**
+** Description      connection callback.
+**
+** Returns          none.
+**
+*******************************************************************************/
+static void bta_gatts_conn_cback (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id,
+                                  BOOLEAN connected, tGATT_DISCONN_REASON reason)
+{
+    tBTA_GATTS      cb_data;
+    UINT8           evt = connected ? BTA_GATTS_CONNECT_EVT: BTA_GATTS_DISCONNECT_EVT;
+    tBTA_GATTS_RCB  *p_reg;
+
+    APPL_TRACE_DEBUG4 ("bta_gatts_conn_cback gatt_if=%d conn_id=%d connected=%d reason = 0x%04d",
+                        gatt_if, conn_id, connected, reason);
+    APPL_TRACE_DEBUG6("bta_gatts_conn_cback  bda :%02x-%02x-%02x-%02x-%02x-%02x ",
+                      bda[0],  bda[1], bda[2],  bda[3], bda[4],  bda[5]);
+
+    p_reg = bta_gatts_find_app_rcb_by_app_if(gatt_if);
+
+    if (p_reg && p_reg->p_cback)
+    {
+        cb_data.conn.conn_id = conn_id;
+        cb_data.conn.server_if = gatt_if;
+        cb_data.conn.reason = reason;
+        memcpy(cb_data.conn.remote_bda, bda, BD_ADDR_LEN);
+        (*p_reg->p_cback)(evt, &cb_data);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("bta_gatts_conn_cback server_if=%d not found",gatt_if);
+    }
+}
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gatts_api.c b/bta/gatt/bta_gatts_api.c
new file mode 100644
index 0000000..65df0a6
--- /dev/null
+++ b/bta/gatt/bta_gatts_api.c
@@ -0,0 +1,512 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for GATT server of BTA.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+#include "gki.h"
+#include "bta_sys.h"
+#include "bta_gatt_api.h"
+#include "bta_gatts_int.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_gatts_reg =
+{
+    bta_gatts_hdl_event,
+    NULL        /* need a disable functino to be called when BT is disabled */
+};
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AppRegister
+**
+** Description      This function is called to register application callbacks
+**                    with BTA GATTS module.
+**
+** Parameters       p_app_uuid - applicaiton UUID
+**                  p_cback - pointer to the application callback function.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTS_AppRegister(tBT_UUID *p_app_uuid, tBTA_GATTS_CBACK *p_cback)
+{
+    tBTA_GATTS_API_REG  *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    if (!bta_gatts_cb.enabled)
+    {
+        bta_sys_register(BTA_ID_GATTS, &bta_gatts_reg);
+    }
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_GATTS_API_REG *) GKI_getbuf(sizeof(tBTA_GATTS_API_REG))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_GATTS_API_REG_EVT;
+
+        if (p_app_uuid != NULL)
+            memcpy(&p_buf->app_uuid, p_app_uuid, sizeof(tBT_UUID));
+        p_buf->p_cback      = p_cback;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AppDeregister
+**
+** Description      De-register with GATT Server.
+**
+** Parameters       app_id: applicatino ID.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_AppDeregister(tBTA_GATTS_IF server_if)
+{
+    tBTA_GATTS_API_DEREG  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_DEREG *) GKI_getbuf(sizeof(tBTA_GATTS_API_DEREG))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_GATTS_API_DEREG_EVT;
+        p_buf->server_if    = server_if;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_CreateService
+**
+** Description      Create a service. When service creation is done, a callback
+**                  event BTA_GATTS_CREATE_SRVC_EVT is called to report status
+**                  and service ID to the profile. The service ID obtained in
+**                  the callback function needs to be used when adding included
+**                  service and characteristics/descriptors into the service.
+**
+** Parameters       app_id: Profile ID this service is belonged to.
+**                  p_service_uuid: service UUID.
+**                  inst: instance ID number of this service.
+**                  num_handle: numble of handle requessted for this service.
+**                  is_primary: is this service a primary one or not.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_CreateService(tBTA_GATTS_IF server_if, tBT_UUID *p_service_uuid, UINT8 inst,
+                             UINT16 num_handle, BOOLEAN is_primary)
+{
+    tBTA_GATTS_API_CREATE_SRVC  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_CREATE_SRVC *) GKI_getbuf(sizeof(tBTA_GATTS_API_CREATE_SRVC))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTS_API_CREATE_SRVC_EVT;
+
+        p_buf->server_if = server_if;
+        p_buf->inst = inst;
+        memcpy(&p_buf->service_uuid, p_service_uuid, sizeof(tBT_UUID));
+        p_buf->num_handle = num_handle;
+        p_buf->is_pri = is_primary;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddIncludeService
+**
+** Description      This function is called to add an included service. After included
+**                  service is included, a callback event BTA_GATTS_ADD_INCL_SRVC_EVT
+**                  is reported the included service ID.
+**
+** Parameters       service_id: service ID to which this included service is to
+**                              be added.
+**                  included_service_id: the service ID to be included.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_AddIncludeService(UINT16 service_id, UINT16 included_service_id)
+{
+    tBTA_GATTS_API_ADD_INCL_SRVC  *p_buf;
+
+    if ((p_buf =
+         (tBTA_GATTS_API_ADD_INCL_SRVC *) GKI_getbuf(sizeof(tBTA_GATTS_API_ADD_INCL_SRVC)))
+        != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTS_API_ADD_INCL_SRVC_EVT;
+
+        p_buf->hdr.layer_specific = service_id;
+        p_buf->included_service_id = included_service_id;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddCharacteristic
+**
+** Description      This function is called to add a characteristic into a service.
+**
+** Parameters       service_id: service ID to which this included service is to
+**                              be added.
+**                  p_char_uuid : Characteristic UUID.
+**                  perm      : Characteristic value declaration attribute permission.
+**                  property  : Characteristic Properties
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTS_AddCharacteristic (UINT16 service_id,  tBT_UUID  *p_char_uuid,
+                                  tBTA_GATT_PERM perm, tBTA_GATT_CHAR_PROP property)
+{
+    tBTA_GATTS_API_ADD_CHAR  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_ADD_CHAR *) GKI_getbuf(sizeof(tBTA_GATTS_API_ADD_CHAR))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_GATTS_API_ADD_CHAR));
+
+        p_buf->hdr.event = BTA_GATTS_API_ADD_CHAR_EVT;
+        p_buf->hdr.layer_specific = service_id;
+        p_buf->perm = perm;
+        p_buf->property = property;
+
+        if (p_char_uuid)
+        {
+            memcpy(&p_buf->char_uuid, p_char_uuid, sizeof(tBT_UUID));
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddCharDescriptor
+**
+** Description      This function is called to add characteristic descriptor. When
+**                  it's done, a callback event BTA_GATTS_ADD_DESCR_EVT is called
+**                  to report the status and an ID number for this descriptor.
+**
+** Parameters       service_id: service ID to which this charatceristic descriptor is to
+**                              be added.
+**                  perm: descriptor access permission.
+**                  p_descr_uuid: descriptor UUID.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+void BTA_GATTS_AddCharDescriptor (UINT16 service_id,
+                                  tBTA_GATT_PERM perm,
+                                  tBT_UUID  * p_descr_uuid)
+{
+    tBTA_GATTS_API_ADD_DESCR  *p_buf;
+    UINT16  len = sizeof(tBTA_GATTS_API_ADD_DESCR);
+
+
+    if ((p_buf = (tBTA_GATTS_API_ADD_DESCR *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event = BTA_GATTS_API_ADD_DESCR_EVT;
+        p_buf->hdr.layer_specific = service_id;
+        p_buf->perm = perm;
+
+        if (p_descr_uuid)
+        {
+            memcpy(&p_buf->descr_uuid, p_descr_uuid, sizeof(tBT_UUID));
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_DeleteService
+**
+** Description      This function is called to delete a service. When this is done,
+**                  a callback event BTA_GATTS_DELETE_EVT is report with the status.
+**
+** Parameters       service_id: service_id to be deleted.
+**
+** Returns          returns none.
+**
+*******************************************************************************/
+void  BTA_GATTS_DeleteService(UINT16 service_id)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_GATTS_API_DEL_SRVC_EVT;
+
+        p_buf->layer_specific = service_id;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_StartService
+**
+** Description      This function is called to start a service.
+**
+** Parameters       service_id: the service ID to be started.
+**                  sup_transport: supported trasnport.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void  BTA_GATTS_StartService(UINT16 service_id, tBTA_GATT_TRANSPORT sup_transport)
+{
+    tBTA_GATTS_API_START  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_START *) GKI_getbuf(sizeof(tBTA_GATTS_API_START))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTS_API_START_SRVC_EVT;
+
+        p_buf->hdr.layer_specific = service_id;
+        p_buf->transport = sup_transport;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_StopService
+**
+** Description      This function is called to stop a service.
+**
+** Parameters       service_id - service to be topped.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTS_StopService(UINT16 service_id)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_GATTS_API_STOP_SRVC_EVT;
+
+        p_buf->layer_specific = service_id;
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_HandleValueIndication
+**
+** Description      This function is called to read a characteristics descriptor.
+**
+** Parameters       bda - remote device bd address to indicate.
+**					attr_id - attribute ID to indicate.
+**                  data_len - indicate data length.
+**                  p_data: data to indicate.
+**                  need_confirm - if this indication expects a confirmation or not.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTS_HandleValueIndication (UINT16 conn_id, UINT16 attr_id, UINT16 data_len,
+                                      UINT8 *p_data, BOOLEAN need_confirm)
+{
+    tBTA_GATTS_API_INDICATION  *p_buf;
+    UINT16  len = sizeof(tBTA_GATTS_API_INDICATION);
+
+    if ((p_buf = (tBTA_GATTS_API_INDICATION *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event = BTA_GATTS_API_INDICATION_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->attr_id = attr_id;
+        p_buf->need_confirm = need_confirm;
+
+        if (data_len > 0 && p_data != NULL)
+        {
+            p_buf->len = data_len;
+            memcpy(p_buf->value, p_data, data_len);
+
+        }
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         BTA_GATTS_SendRsp
+**
+** Description      This function is called to send a response to a request.
+**
+** Parameters       conn_id - connection identifier.
+**                  trans_id - transaction ID.
+**                  status - response status
+**                  p_msg - response data.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTA_GATTS_SendRsp (UINT16 conn_id, UINT32 trans_id,
+                        tBTA_GATT_STATUS status, tBTA_GATTS_RSP *p_msg)
+{
+    tBTA_GATTS_API_RSP  *p_buf;
+    UINT16  len = sizeof(tBTA_GATTS_API_RSP) + sizeof(tBTA_GATTS_RSP);
+
+    if ((p_buf = (tBTA_GATTS_API_RSP *) GKI_getbuf(len)) != NULL)
+    {
+        memset(p_buf, 0, len);
+
+        p_buf->hdr.event    = BTA_GATTS_API_RSP_EVT;
+        p_buf->hdr.layer_specific = conn_id;
+        p_buf->trans_id = trans_id;
+        p_buf->status = status;
+
+        if (p_msg != NULL)
+        {
+            p_buf->p_rsp = (tBTA_GATTS_RSP *)(p_buf + 1);
+            memcpy(p_buf->p_rsp, p_msg, sizeof(tBTA_GATTS_RSP));
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_Open
+**
+** Description      Open a direct open connection or add a background auto connection
+**                  bd address
+**
+** Parameters       server_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_Open(tBTA_GATTS_IF server_if, BD_ADDR remote_bda, BOOLEAN is_direct)
+{
+    tBTA_GATTS_API_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_OPEN *) GKI_getbuf(sizeof(tBTA_GATTS_API_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTS_API_OPEN_EVT;
+        p_buf->server_if = server_if;
+        p_buf->is_direct = is_direct;
+        memcpy(p_buf->remote_bda, remote_bda, BD_ADDR_LEN);
+
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_CancelOpen
+**
+** Description      Cancel a direct open connection or remove a background auto connection
+**                  bd address
+**
+** Parameters       server_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_CancelOpen(tBTA_GATTS_IF server_if, BD_ADDR remote_bda, BOOLEAN is_direct)
+{
+    tBTA_GATTS_API_CANCEL_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_GATTS_API_CANCEL_OPEN *) GKI_getbuf(sizeof(tBTA_GATTS_API_CANCEL_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_GATTS_API_CANCEL_OPEN_EVT;
+        p_buf->server_if = server_if;
+        p_buf->is_direct = is_direct;
+        memcpy(p_buf->remote_bda, remote_bda, BD_ADDR_LEN);
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_Close
+**
+** Description      Close a connection  a remote device.
+**
+** Parameters       conn_id: connectino ID to be closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_GATTS_Close(UINT16 conn_id)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_GATTS_API_CLOSE_EVT;
+        p_buf->layer_specific = conn_id;
+        bta_sys_sendmsg(p_buf);
+    }
+    return;
+
+}
+
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gatts_int.h b/bta/gatt/bta_gatts_int.h
new file mode 100644
index 0000000..4810c05
--- /dev/null
+++ b/bta/gatt/bta_gatts_int.h
@@ -0,0 +1,246 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private file for the BTA GATT server.
+ *
+ ******************************************************************************/
+#ifndef BTA_GATTS_INT_H
+#define BTA_GATTS_INT_H
+
+#include "bt_target.h"
+#include "bta_sys.h"
+#include "bta_gatt_api.h"
+#include "gatt_api.h"
+//#include "bta_gatts_co.h"
+
+#include "gki.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+enum
+{
+    BTA_GATTS_API_REG_EVT  = BTA_SYS_EVT_START(BTA_ID_GATTS),
+    BTA_GATTS_INT_START_IF_EVT,
+    BTA_GATTS_API_DEREG_EVT,
+    BTA_GATTS_API_CREATE_SRVC_EVT,
+    BTA_GATTS_API_INDICATION_EVT,
+
+    BTA_GATTS_API_ADD_INCL_SRVC_EVT,
+    BTA_GATTS_API_ADD_CHAR_EVT,
+    BTA_GATTS_API_ADD_DESCR_EVT,
+    BTA_GATTS_API_DEL_SRVC_EVT,
+    BTA_GATTS_API_START_SRVC_EVT,
+    BTA_GATTS_API_STOP_SRVC_EVT,
+    BTA_GATTS_API_RSP_EVT,
+    BTA_GATTS_API_OPEN_EVT,
+    BTA_GATTS_API_CANCEL_OPEN_EVT,
+    BTA_GATTS_API_CLOSE_EVT
+
+};
+typedef UINT16 tBTA_GATTS_INT_EVT;
+
+/* max number of application allowed on device */
+#define BTA_GATTS_MAX_APP_NUM   GATT_MAX_SR_PROFILES
+
+/* max number of services allowed in the device */
+#define BTA_GATTS_MAX_SRVC_NUM   GATT_MAX_SR_PROFILES
+
+/* internal strucutre for GATTC register API  */
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBT_UUID                app_uuid;
+    tBTA_GATTS_CBACK        *p_cback;
+}tBTA_GATTS_API_REG;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATTS_IF           server_if;
+}tBTA_GATTS_INT_START_IF;
+
+typedef tBTA_GATTS_INT_START_IF tBTA_GATTS_API_DEREG;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATTS_IF           server_if;
+    tBT_UUID                service_uuid;
+    UINT16                  num_handle;
+    UINT8                   inst;
+    BOOLEAN                 is_pri;
+
+} tBTA_GATTS_API_CREATE_SRVC;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBT_UUID                char_uuid;
+    tBTA_GATT_PERM          perm;
+    tBTA_GATT_CHAR_PROP     property;
+
+}tBTA_GATTS_API_ADD_CHAR;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    UINT16                  included_service_id;
+
+}tBTA_GATTS_API_ADD_INCL_SRVC;
+
+typedef struct
+{
+    BT_HDR                      hdr;
+    tBT_UUID                    descr_uuid;
+    tBTA_GATT_PERM              perm;
+}tBTA_GATTS_API_ADD_DESCR;
+
+typedef struct
+{
+    BT_HDR  hdr;
+    //todo BD_ADDR bd_addr;
+    UINT16  attr_id;
+    UINT16  len;
+    BOOLEAN need_confirm;
+    UINT8   value[BTA_GATT_MAX_ATTR_LEN];
+}tBTA_GATTS_API_INDICATION;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT32              trans_id;
+    tBTA_GATT_STATUS    status;
+    tBTA_GATTS_RSP      *p_rsp;
+}tBTA_GATTS_API_RSP;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_GATT_TRANSPORT     transport;
+}tBTA_GATTS_API_START;
+
+
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             remote_bda;
+    tBTA_GATTS_IF       server_if;
+    BOOLEAN             is_direct;
+}tBTA_GATTS_API_OPEN;
+
+typedef tBTA_GATTS_API_OPEN tBTA_GATTS_API_CANCEL_OPEN;
+
+typedef union
+{
+    BT_HDR                          hdr;
+    tBTA_GATTS_API_REG              api_reg;
+    tBTA_GATTS_API_DEREG            api_dereg;
+    tBTA_GATTS_API_CREATE_SRVC      api_create_svc;
+    tBTA_GATTS_API_ADD_INCL_SRVC    api_add_incl_srvc;
+    tBTA_GATTS_API_ADD_CHAR         api_add_char;
+    tBTA_GATTS_API_ADD_DESCR        api_add_char_descr;
+    tBTA_GATTS_API_START            api_start;
+    tBTA_GATTS_API_INDICATION       api_indicate;
+    tBTA_GATTS_API_RSP              api_rsp;
+    tBTA_GATTS_API_OPEN             api_open;
+    tBTA_GATTS_API_CANCEL_OPEN      api_cancel_open;
+
+    tBTA_GATTS_INT_START_IF         int_start_if;
+} tBTA_GATTS_DATA;
+
+/* application registration control block */
+typedef struct
+{
+    BOOLEAN             in_use;
+    tBT_UUID            app_uuid;
+    tBTA_GATTS_CBACK    *p_cback;
+    tBTA_GATTS_IF        gatt_if;  //todo cahneg to server_if
+}tBTA_GATTS_RCB;
+
+/* service registration control block */
+typedef struct
+{
+    tBT_UUID    service_uuid;   /* service UUID */
+    UINT16      service_id;     /* service handle */
+    UINT8       inst_num;       /* instance ID */
+    UINT8       rcb_idx;
+    UINT8       idx;            /* self index of serviec CB */
+    BOOLEAN     in_use;
+
+}tBTA_GATTS_SRVC_CB;
+
+
+/* GATT server control block */
+typedef struct
+{
+    BOOLEAN             enabled;
+    tBTA_GATTS_RCB      rcb[BTA_GATTS_MAX_APP_NUM];
+    tBTA_GATTS_SRVC_CB  srvc_cb[BTA_GATTS_MAX_SRVC_NUM];
+}tBTA_GATTS_CB;
+
+
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* GATTC control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_GATTS_CB  bta_gatts_cb;
+#else
+extern tBTA_GATTS_CB *bta_gatts_cb_ptr;
+    #define bta_gatts_cb (*bta_gatts_cb_ptr)
+#endif
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+extern BOOLEAN bta_gatts_hdl_event(BT_HDR *p_msg);
+
+extern void bta_gatts_register(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg);
+extern void bta_gatts_start_if(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg);
+extern void bta_gatts_deregister(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA *p_msg);
+extern void bta_gatts_create_srvc(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_add_include_srvc(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_add_char(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_add_char_descr(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_delete_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_start_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_stop_service(tBTA_GATTS_SRVC_CB *p_srvc_cb, tBTA_GATTS_DATA * p_msg);
+
+extern void bta_gatts_send_rsp(tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_indicate_handle (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+
+
+extern void bta_gatts_open (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_cancel_open (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+extern void bta_gatts_close (tBTA_GATTS_CB *p_cb, tBTA_GATTS_DATA * p_msg);
+
+extern BOOLEAN bta_gatts_uuid_compare(tBT_UUID tar, tBT_UUID src);
+extern tBTA_GATTS_RCB *bta_gatts_find_app_rcb_by_app_if(tBTA_GATTS_IF server_if);
+extern UINT8 bta_gatts_find_app_rcb_idx_by_app_if(tBTA_GATTS_CB *p_cb, tBTA_GATTS_IF server_if);
+extern UINT8 bta_gatts_alloc_srvc_cb(tBTA_GATTS_CB *p_cb, UINT8 rcb_idx);
+extern tBTA_GATTS_SRVC_CB * bta_gatts_find_srvc_cb_by_srvc_id(tBTA_GATTS_CB *p_cb, UINT16 service_id);
+extern tBTA_GATTS_SRVC_CB * bta_gatts_find_srvc_cb_by_attr_id(tBTA_GATTS_CB *p_cb, UINT16 attr_id);
+
+
+#endif /* BTA_GATTS_INT_H */
+
diff --git a/bta/gatt/bta_gatts_main.c b/bta/gatt/bta_gatts_main.c
new file mode 100644
index 0000000..e2b2494
--- /dev/null
+++ b/bta/gatt/bta_gatts_main.c
@@ -0,0 +1,134 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT server main functions and state machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "bta_gatts_int.h"
+#include "gki.h"
+
+/* type for service building action functions */
+typedef void (*tBTA_GATTS_SRVC_ACT)(tBTA_GATTS_SRVC_CB *p_rcb, tBTA_GATTS_DATA *p_data);
+
+/* service building action function list */
+const tBTA_GATTS_SRVC_ACT bta_gatts_srvc_build_act[] =
+{
+    bta_gatts_add_include_srvc,
+    bta_gatts_add_char,
+    bta_gatts_add_char_descr,
+    bta_gatts_delete_service,
+    bta_gatts_start_service,
+    bta_gatts_stop_service,
+};
+
+/* GATTS control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_GATTS_CB  bta_gatts_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_gatts_hdl_event
+**
+** Description      BTA GATT server main event handling function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_gatts_hdl_event(BT_HDR *p_msg)
+{
+    tBTA_GATTS_CB *p_cb = &bta_gatts_cb;
+    tBTA_GATTS_SRVC_CB *p_srvc_cb = NULL;
+
+    switch (p_msg->event)
+    {
+        case BTA_GATTS_API_REG_EVT:
+            bta_gatts_register(p_cb, (tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_INT_START_IF_EVT:
+            bta_gatts_start_if(p_cb, (tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_DEREG_EVT:
+            bta_gatts_deregister(p_cb, (tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_CREATE_SRVC_EVT:
+            bta_gatts_create_srvc(p_cb, (tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_INDICATION_EVT:
+            bta_gatts_indicate_handle(p_cb,(tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_OPEN_EVT:
+            bta_gatts_open(p_cb,(tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_CANCEL_OPEN_EVT:
+            bta_gatts_cancel_open(p_cb,(tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_CLOSE_EVT:
+            bta_gatts_close(p_cb,(tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_RSP_EVT:
+            bta_gatts_send_rsp(p_cb,(tBTA_GATTS_DATA *) p_msg);
+            break;
+
+        case BTA_GATTS_API_ADD_INCL_SRVC_EVT:
+        case BTA_GATTS_API_ADD_CHAR_EVT:
+        case BTA_GATTS_API_ADD_DESCR_EVT:
+        case BTA_GATTS_API_DEL_SRVC_EVT:
+        case BTA_GATTS_API_START_SRVC_EVT:
+        case BTA_GATTS_API_STOP_SRVC_EVT:
+
+            p_srvc_cb = bta_gatts_find_srvc_cb_by_srvc_id(p_cb,
+                                ((tBTA_GATTS_DATA *)p_msg)->api_add_incl_srvc.hdr.layer_specific);
+
+            if (p_srvc_cb != NULL)
+            {
+                bta_gatts_srvc_build_act[p_msg->event - BTA_GATTS_API_ADD_INCL_SRVC_EVT](p_srvc_cb, (tBTA_GATTS_DATA *) p_msg);
+            }
+            else
+            {
+                APPL_TRACE_ERROR0("service not created");
+            }
+            break;
+
+        default:
+            break;
+    }
+
+
+    return (TRUE);
+}
+
+#endif /* BTA_GATT_INCLUDED */
diff --git a/bta/gatt/bta_gatts_utils.c b/bta/gatt/bta_gatts_utils.c
new file mode 100644
index 0000000..5145c95
--- /dev/null
+++ b/bta/gatt/bta_gatts_utils.c
@@ -0,0 +1,235 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the GATT client utility function.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include <string.h>
+#include "utl.h"
+#include "gki.h"
+#include "bta_sys.h"
+#include "bta_gatts_int.h"
+#include "bd.h"
+
+static const UINT8  base_uuid[LEN_UUID_128] = {0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80,
+    0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+/*******************************************************************************
+**
+** Function         bta_gatt_convert_uuid16_to_uuid128
+**
+** Description      Convert a 16 bits UUID to be an standard 128 bits one.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+static void bta_gatt_convert_uuid16_to_uuid128(UINT8 uuid_128[LEN_UUID_128], UINT16 uuid_16)
+{
+    UINT8   *p = &uuid_128[LEN_UUID_128 - 4];
+
+    memcpy (uuid_128, base_uuid, LEN_UUID_128);
+
+    UINT16_TO_STREAM(p, uuid_16);
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_alloc_srvc_cb
+**
+** Description      allocate a service control block.
+**
+** Returns          pointer to the control block, or otherwise NULL when failed.
+**
+*******************************************************************************/
+UINT8 bta_gatts_alloc_srvc_cb(tBTA_GATTS_CB *p_cb, UINT8 rcb_idx)
+{
+    UINT8 i;
+
+    for (i = 0; i < BTA_GATTS_MAX_SRVC_NUM; i ++)
+    {
+        if (!p_cb->srvc_cb[i].in_use)
+        {
+            p_cb->srvc_cb[i].in_use = TRUE;
+            p_cb->srvc_cb[i].rcb_idx = rcb_idx;
+            return i;
+        }
+    }
+    return BTA_GATTS_INVALID_APP;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gatts_find_app_rcb_by_app_if
+**
+** Description      find the index of the application control block by app ID.
+**
+** Returns          pointer to the control block if success, otherwise NULL
+**
+*******************************************************************************/
+tBTA_GATTS_RCB *bta_gatts_find_app_rcb_by_app_if(tBTA_GATTS_IF server_if)
+{
+    UINT8 i;
+    tBTA_GATTS_RCB *p_reg;
+
+    for (i = 0, p_reg = bta_gatts_cb.rcb; i < BTA_GATTS_MAX_APP_NUM; i ++, p_reg++)
+    {
+        if (p_reg->in_use && p_reg->gatt_if == server_if)
+            return p_reg;
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         bta_gatts_find_app_rcb_idx_by_app_if
+**
+** Description      find the index of the application control block by app ID.
+**
+** Returns          index of the control block, or BTA_GATTS_INVALID_APP if failed.
+**
+*******************************************************************************/
+
+UINT8 bta_gatts_find_app_rcb_idx_by_app_if(tBTA_GATTS_CB *p_cb, tBTA_GATTS_IF server_if)
+{
+    UINT8 i;
+
+    for (i = 0; i < BTA_GATTS_MAX_APP_NUM; i ++)
+    {
+        if (p_cb->rcb[i].in_use && p_cb->rcb[i].gatt_if == server_if)
+            return i;
+    }
+    return BTA_GATTS_INVALID_APP;
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_find_srvc_cb_by_srvc_id
+**
+** Description      find the service control block by service ID.
+**
+** Returns          pointer to the rcb.
+**
+*******************************************************************************/
+tBTA_GATTS_SRVC_CB * bta_gatts_find_srvc_cb_by_srvc_id(tBTA_GATTS_CB *p_cb, UINT16 service_id)
+{
+    UINT8 i;
+    APPL_TRACE_DEBUG1("bta_gatts_find_srvc_cb_by_srvc_id  service_id=%d", service_id);
+    for (i = 0; i < BTA_GATTS_MAX_SRVC_NUM; i ++)
+    {
+        if (p_cb->srvc_cb[i].in_use &&
+            p_cb->srvc_cb[i].service_id == service_id)
+        {
+            APPL_TRACE_DEBUG1("bta_gatts_find_srvc_cb_by_srvc_id  found service cb index =%d", i);
+            return &p_cb->srvc_cb[i];
+        }
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_find_srvc_cb_by_attr_id
+**
+** Description      find the service control block by attribute ID.
+**
+** Returns          pointer to the rcb.
+**
+*******************************************************************************/
+tBTA_GATTS_SRVC_CB * bta_gatts_find_srvc_cb_by_attr_id(tBTA_GATTS_CB *p_cb, UINT16 attr_id)
+{
+    UINT8 i;
+
+    for (i = 0; i < (BTA_GATTS_MAX_SRVC_NUM); i ++)
+    {
+        if (/* middle service */
+            (i < (BTA_GATTS_MAX_SRVC_NUM - 1) &&
+             p_cb->srvc_cb[i].in_use &&
+             p_cb->srvc_cb[i + 1].in_use &&
+             attr_id >= p_cb->srvc_cb[i].service_id &&
+             attr_id < p_cb->srvc_cb[i + 1].service_id) ||
+            /* last active service */
+            (i < (BTA_GATTS_MAX_SRVC_NUM - 1) &&
+             p_cb->srvc_cb[i].in_use &&
+             !p_cb->srvc_cb[i + 1].in_use &&
+             attr_id >= p_cb->srvc_cb[i].service_id)    ||
+            /* last service incb */
+            (i == (BTA_GATTS_MAX_SRVC_NUM - 1) &&
+             attr_id >= p_cb->srvc_cb[i].service_id)
+           )
+        {
+            return &p_cb->srvc_cb[i];
+        }
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         bta_gatts_uuid_compare
+**
+** Description      Compare two UUID to see if they are the same.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN bta_gatts_uuid_compare(tBT_UUID tar, tBT_UUID src)
+{
+    UINT8  su[LEN_UUID_128], tu[LEN_UUID_128];
+    UINT8  *ps, *pt;
+
+    /* any of the UUID is unspecified */
+    if (src.len == 0 || tar.len == 0)
+    {
+        return TRUE;
+    }
+
+    /* If both are 16-bit, we can do a simple compare */
+    if (src.len == 2 && tar.len == 2)
+    {
+        return src.uu.uuid16 == tar.uu.uuid16;
+    }
+
+    /* One or both of the UUIDs is 128-bit */
+    if (src.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        bta_gatt_convert_uuid16_to_uuid128(su, src.uu.uuid16);
+        ps = su;
+    }
+    else
+        ps = src.uu.uuid128;
+
+    if (tar.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        bta_gatt_convert_uuid16_to_uuid128(tu, tar.uu.uuid16);
+        pt = tu;
+    }
+    else
+        pt = tar.uu.uuid128;
+
+    return(memcmp(ps, pt, LEN_UUID_128) == 0);
+}
+
+
+
+
+#endif
diff --git a/bta/hh/bta_hh_act.c b/bta/hh/bta_hh_act.c
new file mode 100644
index 0000000..de08096
--- /dev/null
+++ b/bta/hh/bta_hh_act.c
@@ -0,0 +1,1197 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HID host action functions.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "bta_sys.h"
+#include "btm_api.h"
+#include "l2c_api.h"
+#include "bta_hh_int.h"
+#include "bta_hh_co.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+
+/*****************************************************************************
+**  Local Function prototypes
+*****************************************************************************/
+static void bta_hh_cback (UINT8 dev_handle, UINT8 event, UINT32 data,
+                          BT_HDR *pdata);
+static tBTA_HH_STATUS bta_hh_get_trans_status(UINT32 result);
+
+#if BTA_HH_DEBUG
+static char* bta_hh_get_w4_event(UINT16 event);
+static char * bta_hh_hid_event_name(UINT16 event);
+#endif
+
+/*****************************************************************************
+**  Action Functions
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         bta_hh_api_enable
+**
+** Description      Perform necessary operations to enable HID host.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_api_enable(tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_STATUS      status = BTA_HH_ERR;
+    UINT8               xx;
+
+    /* initialize BTE HID */
+    HID_HostInit();
+
+    memset(&bta_hh_cb, 0, sizeof(tBTA_HH_CB));
+
+    HID_HostSetSecurityLevel("", p_data->api_enable.sec_mask);
+
+    /* Register with L2CAP */
+    if ( HID_HostRegister (bta_hh_cback) == HID_SUCCESS)
+    {
+        /* store parameters */
+        bta_hh_cb.p_cback = p_data->api_enable.p_cback;
+
+        status = BTA_HH_OK;
+        /* initialize device CB */
+        for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx ++)
+        {
+            bta_hh_cb.kdev[xx].state        = BTA_HH_IDLE_ST;
+            bta_hh_cb.kdev[xx].hid_handle   = BTA_HH_INVALID_HANDLE;
+            bta_hh_cb.kdev[xx].index        = xx;
+            /* initialize control block map */
+            bta_hh_cb.cb_index[xx]          = BTA_HH_MAX_KNOWN;
+        }
+    }
+
+    /* signal BTA call back event */
+    (* bta_hh_cb.p_cback)(BTA_HH_ENABLE_EVT, (tBTA_HH *)&status);
+}
+/*******************************************************************************
+**
+** Function         bta_hh_api_disable
+**
+** Description      Perform necessary operations to disable HID host.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_api_disable(void)
+{
+    UINT8 xx;
+
+    /* service is not enabled */
+    if (bta_hh_cb.p_cback == NULL)
+        return;
+
+    /* no live connection, signal DISC_CMPL_EVT directly */
+    if (!bta_hh_cb.cnt_num)
+    {
+        bta_hh_disc_cmpl();
+    }
+    else /* otherwise, disconnect all live connections */
+    {
+        bta_hh_cb.w4_disable = TRUE;
+
+        for(xx = 0; xx < BTA_HH_MAX_KNOWN; xx ++)
+        {
+            /* send API_CLOSE event to every connected device */
+            if ( bta_hh_cb.kdev[xx].state == BTA_HH_CONN_ST )
+            {
+                /* disconnect all connected devices */
+                bta_hh_sm_execute(&bta_hh_cb.kdev[xx],
+                                BTA_HH_API_CLOSE_EVT,
+                                NULL);
+            }
+        }
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_disc_cmpl
+**
+** Description      All connections have been closed, disable service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_disc_cmpl(void)
+{
+    UINT8   xx;
+    tBTA_HH_STATUS  status = BTA_HH_OK;
+
+    /* Deregister with lower layer */
+    if (HID_HostDeregister()!= HID_SUCCESS)
+        status = BTA_HH_ERR;
+
+    /* free buffer in CB holding report descriptors */
+    for(xx = 0; xx < BTA_HH_MAX_KNOWN; xx ++)
+    {
+        utl_freebuf((void **)&bta_hh_cb.kdev[xx].dscp_info.descriptor.dsc_list);
+    }
+    utl_freebuf((void **)&bta_hh_cb.p_disc_db);
+
+    (* bta_hh_cb.p_cback)(BTA_HH_DISABLE_EVT, (tBTA_HH *)&status);
+    /* all connections are down, no waiting for diconnect */
+    memset(&bta_hh_cb, 0, sizeof(tBTA_HH_CB));
+}
+/*******************************************************************************
+**
+** Function         bta_hh_sdp_cback
+**
+** Description      SDP callback function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hh_sdp_cback(UINT16 result, UINT16 attr_mask,
+                                  tHID_DEV_SDP_INFO *sdp_rec )
+{
+    tBTA_HH_DEV_CB     *p_cb = bta_hh_cb.p_cur;
+    UINT8              hdl;
+    tBTA_HH_STATUS    status = BTA_HH_ERR_SDP;
+
+    if (result == SDP_SUCCESS)
+    {
+        /* security is required for the connection, add attr_mask bit*/
+        if (p_cb->sec_mask)
+            attr_mask |= HID_SEC_REQUIRED;
+
+#if BTA_HH_DEBUG
+        APPL_TRACE_EVENT3("bta_hh_sdp_cback: p_cb: %d result 0x%02x, \
+                            attr_mask 0x%02x", \
+                            p_cb, result, attr_mask);
+#endif
+
+        /* check to see type of device is supported , and should not been added before */
+        if (bta_hh_tod_spt(p_cb, sdp_rec->sub_class))
+        {
+            /* if not added before */
+            if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
+            {
+                /*  add device/update attr_mask information */
+                if(HID_HostAddDev (p_cb->addr, attr_mask, &hdl) == HID_SUCCESS)
+                {
+                    status = BTA_HH_OK;
+                    /* update cb_index[] map */
+                    bta_hh_cb.cb_index[hdl] = p_cb->index;
+                }
+                else
+                {
+                    p_cb->app_id = 0;
+                }
+            }
+            /* else : incoming connection after SDP should update the SDP information as well */
+
+            if (p_cb->app_id != 0)
+            {
+                /* update cb information with attr_mask, dscp_info etc. */
+                bta_hh_add_device_to_list(p_cb,  hdl, attr_mask,
+                                            &sdp_rec->dscp_info,
+                                            sdp_rec->sub_class,
+                                            sdp_rec->ssr_max_latency,
+                                            sdp_rec->ssr_min_tout,
+                                            p_cb->app_id);
+
+                p_cb->dscp_info.ctry_code = sdp_rec->ctry_code;
+
+                status = BTA_HH_OK;
+            }
+
+        }
+        else /* type of device is not supported */
+            status = BTA_HH_ERR_TOD_UNSPT;
+    }
+
+    /* free disc_db when SDP is completed */
+    utl_freebuf((void **)&bta_hh_cb.p_disc_db);
+
+
+    /* send SDP_CMPL_EVT into state machine */
+    bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
+
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_hh_di_sdp_cback
+**
+** Description      SDP DI callback function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hh_di_sdp_cback(UINT16 result)
+{
+    tBTA_HH_DEV_CB     *p_cb = bta_hh_cb.p_cur;
+    tBTA_HH_STATUS         status = BTA_HH_ERR_SDP;
+    tSDP_DI_GET_RECORD  di_rec;
+    tHID_STATUS ret;
+#if BTA_HH_DEBUG
+    APPL_TRACE_EVENT2("bta_hh_di_sdp_cback: p_cb: %d result 0x%02x", p_cb, result);
+#endif
+    /* if DI record does not exist on remote device, vendor_id in tBTA_HH_DEV_DSCP_INFO will be
+         * set to 0xffff and we will allow the connection to go through. Spec mandates that DI
+         * record be set, but many HID devices do not set this. So for IOP purposes, we allow the
+         * connection to go through and update the DI record to invalid DI entry.*/
+    if ((result == SDP_SUCCESS) || (result == SDP_NO_RECS_MATCH))
+    {
+        if(result == SDP_SUCCESS && SDP_GetNumDiRecords(bta_hh_cb.p_disc_db) != 0)
+        {
+            /* always update information with primary DI record */
+            if (SDP_GetDiRecord(1, &di_rec, bta_hh_cb.p_disc_db) == SDP_SUCCESS)
+            {
+                bta_hh_update_di_info(p_cb, di_rec.rec.vendor, di_rec.rec.product, di_rec.rec.version);
+            }
+
+        }
+        else /* no DI recrod available */
+        {
+            bta_hh_update_di_info(p_cb, BTA_HH_VENDOR_ID_INVALID, 0, 0);
+        }
+
+        if ((ret = HID_HostGetSDPRecord(p_cb->addr,
+                                 bta_hh_cb.p_disc_db,
+                                 p_bta_hh_cfg->sdp_db_size,
+                                 bta_hh_sdp_cback)) == HID_SUCCESS)
+        {
+            status = BTA_HH_OK;
+        }
+        else
+        {
+#if BTA_HH_DEBUG
+            APPL_TRACE_DEBUG1 ("bta_hh_di_sdp_cback:  HID_HostGetSDPRecord failed: Status 0x%2x",
+                               ret);
+#endif
+        }
+    }
+
+
+    if (status != BTA_HH_OK)
+    {
+        utl_freebuf((void **)&bta_hh_cb.p_disc_db);
+        /* send SDP_CMPL_EVT into state machine */
+        bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
+    }
+    return;
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_start_sdp
+**
+** Description      Start SDP service search, and obtain necessary SDP records.
+**                  Only one SDP service search request is allowed at the same
+**                  time. For every BTA_HhOpen API call, do SDP first unless SDP
+**                  has been done previously.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_start_sdp(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_STATUS          status = BTA_HH_ERR_SDP;
+    UINT8                   hdl;
+
+    p_cb->sec_mask  = p_data->api_conn.sec_mask;
+    p_cb->mode      = p_data->api_conn.mode;
+
+    /* if previously virtually cabled device, skip SDP */
+    if (p_cb->app_id)
+    {
+        status = BTA_HH_OK;
+#if BTA_HH_DEBUG
+        APPL_TRACE_DEBUG0("bta_hh_start_sdp:: skip SDP for known devices");
+#endif
+        if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
+        {
+            if ((HID_HostAddDev (p_cb->addr, p_cb->attr_mask, &hdl)) \
+                == HID_SUCCESS)
+            {
+                /* update device CB with newly register device handle */
+                bta_hh_add_device_to_list(p_cb,  hdl, p_cb->attr_mask, NULL,
+                                          p_cb->sub_class,
+                                          p_cb->dscp_info.ssr_max_latency,
+                                          p_cb->dscp_info.ssr_min_tout,
+                                          p_cb->app_id);
+                /* update cb_index[] map */
+                bta_hh_cb.cb_index[hdl] = p_cb->index;
+            }
+            else
+            {
+                status = BTA_HH_ERR_SDP;
+            }
+        }
+        bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
+
+        return;
+    }
+    /* GetSDPRecord. at one time only one SDP precedure can be active */
+    else if (!bta_hh_cb.p_disc_db)
+    {
+        bta_hh_cb.p_disc_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(p_bta_hh_cfg->sdp_db_size);
+
+        if (bta_hh_cb.p_disc_db == NULL)
+        {
+            status = BTA_HH_ERR_NO_RES;
+        }
+        else
+        {
+            bta_hh_cb.p_cur = p_cb;
+            /* do DI discovery first */
+            if (SDP_DiDiscover(p_data->api_conn.bd_addr,
+                                         bta_hh_cb.p_disc_db,
+                                         p_bta_hh_cfg->sdp_db_size,
+                                         bta_hh_di_sdp_cback) != SDP_SUCCESS)
+            {
+#if BTA_HH_DEBUG
+                APPL_TRACE_DEBUG1 ("bta_hh_start_sdp:  SDP_DiDiscover failed: \
+                    Status 0x%2X",status);
+#endif
+                status = BTA_HH_ERR_SDP;
+                utl_freebuf((void **)&bta_hh_cb.p_disc_db);
+            }
+            else
+                status = BTA_HH_OK;
+        }
+    }
+
+    if (status != BTA_HH_OK)
+        bta_hh_sm_execute(p_cb, BTA_HH_SDP_CMPL_EVT, (tBTA_HH_DATA *)&status);
+
+    return;
+
+}
+/*******************************************************************************
+**
+** Function         bta_hh_sdp_cmpl
+**
+** Description      When SDP completed, initiate a connection or report error depend
+**                  on SDP result.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_sdp_cmpl(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_CONN            conn_dat;
+    tBTA_HH_STATUS          status = p_data->status;
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG1 ("bta_hh_sdp_cmpl:  status 0x%2X",p_data->status);
+#endif
+
+    /* initialize call back data */
+    memset((void *)&conn_dat, 0, sizeof(tBTA_HH_CONN));
+    conn_dat.handle = p_cb->hid_handle;
+    bdcpy(conn_dat.bda, p_cb->addr);
+
+    /* if SDP compl success */
+    if ( status == BTA_HH_OK)
+    {
+        /* not incoming connection doing SDP, initiate a HID connection */
+        if (!p_cb->incoming_conn)
+        {
+            tHID_STATUS ret;
+            /* set security level */
+            HID_HostSetSecurityLevel("", p_cb->sec_mask);
+
+            /* open HID connection */
+            if ((ret = HID_HostOpenDev (p_cb->hid_handle)) != HID_SUCCESS)
+            {
+#if BTA_HH_DEBUG
+                APPL_TRACE_DEBUG1 ("bta_hh_sdp_cmpl:  HID_HostOpenDev failed: \
+                    Status 0x%2X",ret);
+#endif
+                /* open fail, remove device from management device list */
+                HID_HostRemoveDev( p_cb->hid_handle);
+                status = BTA_HH_ERR;
+            }
+            else
+            {
+                status = BTA_HH_OK;
+            }
+        }
+        else /* incoming connection SDP finish */
+        {
+            bta_hh_sm_execute(p_cb, BTA_HH_OPEN_CMPL_EVT, NULL);
+        }
+    }
+
+    if (status != BTA_HH_OK)
+    {
+        conn_dat.status = status;
+
+        (* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn_dat);
+
+        /* move state machine W4_CONN ->IDLE */
+        bta_hh_sm_execute(p_cb, BTA_HH_API_CLOSE_EVT, NULL);
+
+        /* if this is an outgoing connection to an unknown device, clean up cb */
+        if (p_cb->app_id == 0 && !p_cb->incoming_conn)
+        {
+            /* clean up device control block */
+            bta_hh_clean_up_kdev(p_cb);
+        }
+
+#if BTA_HH_DEBUG
+        bta_hh_trace_dev_db();
+#endif
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_api_disc_act
+**
+** Description      HID Host initiate a disconnection.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_api_disc_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_CBDATA    disc_dat;
+    tHID_STATUS     status;
+
+    /* found an active connection */
+    disc_dat.handle = p_data ?(UINT8)p_data->hdr.layer_specific :p_cb->hid_handle;
+    disc_dat.status = BTA_HH_ERR;
+
+    status = HID_HostCloseDev(disc_dat.handle);
+
+    if (status)
+        (* bta_hh_cb.p_cback)(BTA_HH_CLOSE_EVT, (tBTA_HH *)&disc_dat);
+
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_hh_open_cmpl_act
+**
+** Description      HID host connection completed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_open_cmpl_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_CONN        conn ;
+    UINT8   dev_handle = p_data ? (UINT8)p_data->hid_cback.hdr.layer_specific : \
+                        p_cb->hid_handle;
+
+    memset((void *)&conn, 0, sizeof (tBTA_HH_CONN));
+    conn.handle = dev_handle;
+    bdcpy(conn.bda, p_cb->addr);
+
+    /* increase connection number */
+    bta_hh_cb.cnt_num ++;
+
+    /* initialize device driver */
+    bta_hh_co_open(p_cb->hid_handle, p_cb->sub_class,
+                   p_cb->attr_mask,  p_cb->app_id);
+
+    /* update SSR settings */
+    bta_sys_chg_ssr_config(BTA_ID_HH ,p_cb->app_id, p_cb->dscp_info.ssr_max_latency, p_cb->dscp_info.ssr_min_tout);
+    /* inform role manager */
+    bta_sys_conn_open( BTA_ID_HH ,p_cb->app_id, p_cb->addr);
+
+    /* set protocol mode when not default report mode */
+    if (p_cb->mode != BTA_HH_PROTO_RPT_MODE)
+    {
+        if ((HID_HostWriteDev(dev_handle,
+                              HID_TRANS_SET_PROTOCOL, HID_PAR_PROTOCOL_BOOT_MODE,
+                              0,
+                              0, NULL)) != HID_SUCCESS)
+        {
+            /* HID connection is up, while SET_PROTO fail */
+            conn.status = BTA_HH_ERR_PROTO;
+            (* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn);
+        }
+        else
+        {
+            conn.status = BTA_HH_OK;
+            p_cb->w4_evt = BTA_HH_OPEN_EVT;
+        }
+    }
+    else
+        (* bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn);
+
+    p_cb->incoming_conn = FALSE;
+
+}
+/*******************************************************************************
+**
+** Function         bta_hh_open_act
+**
+** Description      HID host receive HID_OPEN_EVT .
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_open_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_API_CONN    conn_data;
+
+#if BTA_HH_DEBUG
+    UINT8   dev_handle = p_data ? (UINT8)p_data->hid_cback.hdr.layer_specific : \
+                        p_cb->hid_handle;
+
+    APPL_TRACE_EVENT1 ("bta_hh_open_act:  Device[%d] connected", dev_handle);
+#endif
+
+    /* SDP has been done */
+    if (p_cb->app_id != 0)
+    {
+        bta_hh_sm_execute(p_cb, BTA_HH_OPEN_CMPL_EVT, p_data);
+    }
+    else
+    /*  app_id == 0 indicates an incoming conenction request arrives without SDP
+        performed, do it first */
+    {
+        p_cb->incoming_conn = TRUE;
+
+        memset(&conn_data, 0, sizeof(tBTA_HH_API_CONN));
+        bdcpy(conn_data.bd_addr, p_cb->addr);
+        bta_hh_start_sdp(p_cb, (tBTA_HH_DATA *)&conn_data);
+    }
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_data_act
+**
+** Description      HID Host process a data report
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_data_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
+{
+    BT_HDR  *pdata = p_data->hid_cback.p_data;
+    UINT8   *p_rpt = (UINT8 *)(pdata + 1) + pdata->offset;
+
+    bta_hh_co_data((UINT8)p_data->hid_cback.hdr.layer_specific, p_rpt, pdata->len,
+                    p_cb->mode, p_cb->sub_class, p_cb->dscp_info.ctry_code, p_cb->addr, p_cb->app_id);
+
+    utl_freebuf((void **)&pdata);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_handsk_act
+**
+** Description      HID Host process a handshake acknoledgement.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_handsk_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
+{
+    tBTA_HH_CBDATA  cback_data ;
+    tBTA_HH_HSDATA  hs_data;
+    tBTA_HH_CONN    conn ;
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG2("HANDSHAKE received for: event = %s data= %d",
+        bta_hh_get_w4_event(p_cb->w4_evt), p_data->hid_cback.data);
+#endif
+
+    memset(&hs_data, 0, sizeof(tBTA_HH_HSDATA));
+
+    switch (p_cb->w4_evt)
+    {
+        /* GET_ transsaction, handshake indicate unsupported request */
+        case BTA_HH_GET_PROTO_EVT:
+            hs_data.rsp_data.proto_mode = BTA_HH_PROTO_UNKNOWN;
+            /* fall through */
+        case BTA_HH_GET_RPT_EVT:
+        case BTA_HH_GET_IDLE_EVT :
+            hs_data.handle = p_cb->hid_handle;
+            /* if handshake gives an OK code for these transaction, fill in UNSUPT */
+            if ((hs_data.status = bta_hh_get_trans_status(p_data->hid_cback.data)) == BTA_HH_OK)
+                 hs_data.status = BTA_HH_HS_TRANS_NOT_SPT;
+
+            (* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&hs_data);
+            p_cb->w4_evt = 0;
+            break;
+
+        /* acknoledgement from HID device for SET_ transaction */
+        case BTA_HH_SET_RPT_EVT:
+        case BTA_HH_SET_PROTO_EVT:
+        case BTA_HH_SET_IDLE_EVT :
+            cback_data.handle  = p_cb->hid_handle;
+            cback_data.status = bta_hh_get_trans_status(p_data->hid_cback.data);
+            (* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&cback_data);
+            p_cb->w4_evt = 0;
+            break;
+
+        /* SET_PROTOCOL when open connection */
+        case BTA_HH_OPEN_EVT:
+            conn.status =p_data->hid_cback.data ? BTA_HH_ERR_PROTO: BTA_HH_OK;
+            conn.handle = p_cb->hid_handle;
+            bdcpy(conn.bda, p_cb->addr);
+            (* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&conn);
+#if BTA_HH_DEBUG
+            bta_hh_trace_dev_db();
+#endif
+            p_cb->w4_evt = 0;
+            break;
+
+        default:
+            /* unknow transaction handshake response */
+            APPL_TRACE_DEBUG0("unknown transaction type");
+            break;
+    }
+
+    /* transaction achknoledgement received, inform PM for mode change */
+    bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_hh_ctrl_dat_act
+**
+** Description      HID Host process a data report from control channel.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_ctrl_dat_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data)
+{
+    BT_HDR          *pdata = p_data->hid_cback.p_data;
+    UINT8           *data = (UINT8 *)(pdata + 1) + pdata->offset;
+    tBTA_HH_HSDATA    hs_data;
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG1("Ctrl DATA received w4: event[%s]",
+                        bta_hh_get_w4_event(p_cb->w4_evt));
+#endif
+    hs_data.status  = BTA_HH_OK;
+    hs_data.handle  = p_cb->hid_handle;
+
+    switch (p_cb->w4_evt)
+    {
+    case BTA_HH_GET_IDLE_EVT:
+        hs_data.rsp_data.idle_rate = *data;
+        break;
+    case BTA_HH_GET_RPT_EVT:
+        hs_data.rsp_data.p_rpt_data = pdata;
+        break;
+    case BTA_HH_GET_PROTO_EVT:
+        /* match up BTE/BTA report/boot mode def*/
+        hs_data.rsp_data.proto_mode = ((*data) == HID_PAR_PROTOCOL_REPORT)? \
+                    BTA_HH_PROTO_RPT_MODE : BTA_HH_PROTO_BOOT_MODE;
+#if BTA_HH_DEBUG
+        APPL_TRACE_DEBUG1("GET_PROTOCOL Mode = [%s]",
+            (hs_data.rsp_data.proto_mode == BTA_HH_PROTO_RPT_MODE)? "Report" : "Boot");
+#endif
+        break;
+    /* should not expect control DATA for SET_ transaction */
+    case BTA_HH_SET_PROTO_EVT:
+        /* fall through */
+    case BTA_HH_SET_RPT_EVT:
+        /* fall through */
+    case BTA_HH_SET_IDLE_EVT :
+        /* fall through */
+    default:
+#if BTA_HH_DEBUG
+        APPL_TRACE_DEBUG1("invalid  transaction type for DATA payload: 4_evt[%s]",
+                        bta_hh_get_w4_event(p_cb->w4_evt));
+#endif
+        break;
+    }
+
+    /* inform PM for mode change */
+    bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+    bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+
+    (* bta_hh_cb.p_cback)(p_cb->w4_evt, (tBTA_HH *)&hs_data);
+
+    p_cb->w4_evt = 0;
+    utl_freebuf((void **)&pdata);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_close_act
+**
+** Description      HID Host process a close event
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_close_act (tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_CONN            conn_dat ;
+    tBTA_HH_CBDATA          disc_dat = {BTA_HH_OK, 0};
+    UINT32                  reason = p_data->hid_cback.data;    /* Reason for closing (32-bit) */
+
+    /* if HID_HDEV_EVT_VC_UNPLUG was received, report BTA_HH_VC_UNPLUG_EVT */
+    UINT16     event = p_cb->vp ? BTA_HH_VC_UNPLUG_EVT : BTA_HH_CLOSE_EVT;
+
+    disc_dat.handle = p_cb->hid_handle;
+    disc_dat.status = p_data->hid_cback.data;
+
+    /* Check reason for closing */
+    if ((reason & (HID_L2CAP_CONN_FAIL|HID_L2CAP_REQ_FAIL)) ||  /* Failure to initialize connection (page timeout or l2cap error) */
+        (reason == HID_ERR_AUTH_FAILED) ||                      /* Authenication error (while initiating) */
+        (reason == HID_ERR_L2CAP_FAILED))                       /* Failure creating l2cap connection */
+    {
+        /* Failure in opening connection */
+        conn_dat.handle = p_cb->hid_handle;
+        conn_dat.status = (reason == HID_ERR_AUTH_FAILED) ? BTA_HH_ERR_AUTH_FAILED : BTA_HH_ERR;
+        bdcpy(conn_dat.bda, p_cb->addr);
+        HID_HostCloseDev(p_cb->hid_handle);
+
+        /* Report OPEN fail event */
+        (*bta_hh_cb.p_cback)(BTA_HH_OPEN_EVT, (tBTA_HH *)&conn_dat);
+
+#if BTA_HH_DEBUG
+        bta_hh_trace_dev_db();
+#endif
+        return;
+    }
+    /* otherwise report CLOSE/VC_UNPLUG event */
+    else
+    {
+        /* finaliza device driver */
+        bta_hh_co_close(p_cb->hid_handle, p_cb->app_id);
+        /* inform role manager */
+        bta_sys_conn_close( BTA_ID_HH ,p_cb->app_id, p_cb->addr);
+        /* update total conn number */
+        bta_hh_cb.cnt_num --;
+
+        if (disc_dat.status)
+            disc_dat.status = BTA_HH_ERR;
+
+        (*bta_hh_cb.p_cback)(event, (tBTA_HH *)&disc_dat);
+
+        /* if virtually unplug, remove device */
+        if (p_cb->vp )
+        {
+            HID_HostRemoveDev( p_cb->hid_handle);
+            bta_hh_clean_up_kdev(p_cb);
+        }
+
+#if BTA_HH_DEBUG
+        bta_hh_trace_dev_db();
+#endif
+    }
+
+    /* clean up control block, but retain SDP info and device handle */
+    p_cb->vp            = FALSE;
+    p_cb->w4_evt        = 0;
+
+    /* if no connection is active and HH disable is signaled, disable service */
+    if (bta_hh_cb.cnt_num == 0 && bta_hh_cb.w4_disable)
+    {
+        bta_hh_disc_cmpl();
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_get_dscp_act
+**
+** Description      Get device report descriptor
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_get_dscp_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    (*bta_hh_cb.p_cback)(BTA_HH_GET_DSCP_EVT, (tBTA_HH *)&p_cb->dscp_info);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_maint_dev_act
+**
+** Description      HID Host maintain device list.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_maint_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_MAINT_DEV       *p_dev_info = &p_data->api_maintdev;
+    tBTA_HH_DEV_INFO        dev_info ;
+    UINT8                   dev_handle;
+
+    dev_info.status = BTA_HH_ERR;
+    dev_info.handle = BTA_HH_INVALID_HANDLE;
+
+    switch (p_dev_info->sub_event)
+    {
+    case BTA_HH_ADD_DEV_EVT:    /* add a device */
+        bdcpy(dev_info.bda, p_dev_info->bda);
+        /* initialize callback data */
+        if (p_cb->hid_handle == BTA_HH_INVALID_HANDLE)
+        {
+            if (HID_HostAddDev(p_dev_info->bda, p_dev_info->attr_mask, &dev_handle)\
+                            == HID_SUCCESS)
+            {
+                dev_info.handle   = dev_handle;
+                dev_info.status   = BTA_HH_OK;
+
+                /* update DI information */
+                bta_hh_update_di_info(p_cb,
+                                      p_dev_info->dscp_info.vendor_id,
+                                      p_dev_info->dscp_info.product_id,
+                                      p_dev_info->dscp_info.version);
+
+                /* add to BTA device list */
+                bta_hh_add_device_to_list(p_cb, dev_handle,
+                                          p_dev_info->attr_mask,
+                                          &p_dev_info->dscp_info.descriptor,
+                                          p_dev_info->sub_class,
+                                          p_dev_info->dscp_info.ssr_max_latency,
+                                          p_dev_info->dscp_info.ssr_min_tout,
+                                          p_dev_info->app_id);
+                /* update cb_index[] map */
+                bta_hh_cb.cb_index[dev_handle] = p_cb->index;
+            }
+        }
+        else    /* device already been added */
+        {
+            dev_info.handle = p_cb->hid_handle;
+            dev_info.status = BTA_HH_OK;
+        }
+#if BTA_HH_DEBUG
+        bta_hh_trace_dev_db();
+#endif
+        break;
+
+    case BTA_HH_RMV_DEV_EVT:    /* remove device */
+        dev_info.handle = (UINT8)p_dev_info->hdr.layer_specific;
+
+        bdcpy(dev_info.bda, p_cb->addr);
+        if (p_cb->state != BTA_HH_CONN_ST )
+        {
+            if(HID_HostRemoveDev( dev_info.handle ) == HID_SUCCESS)
+            {
+                dev_info.status  = BTA_HH_OK;
+
+                /* remove from known device list in BTA */
+                bta_hh_clean_up_kdev(p_cb);
+            }
+        }
+        break;
+
+    default:
+        APPL_TRACE_DEBUG0("invalid command");
+        break;
+    }
+
+    (* bta_hh_cb.p_cback)(p_dev_info->sub_event, (tBTA_HH *)&dev_info);
+}
+/*******************************************************************************
+**
+** Function         bta_hh_write_dev_act
+**
+** Description      Write device action. can be SET/GET/DATA transaction.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_write_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data)
+{
+    tBTA_HH_CBDATA     cbdata = {BTA_HH_OK, 0};
+    UINT16  event = (p_data->api_sndcmd.t_type - BTA_HH_FST_BTE_TRANS_EVT) +
+                        BTA_HH_FST_TRANS_CB_EVT;
+
+    cbdata.handle = p_cb->hid_handle;
+
+    /* match up BTE/BTA report/boot mode def */
+    if (p_data->api_sndcmd.t_type == HID_TRANS_SET_PROTOCOL)
+    {
+        p_data->api_sndcmd.param = ( p_data->api_sndcmd.param == BTA_HH_PROTO_RPT_MODE) ?\
+                        HID_PAR_PROTOCOL_REPORT :HID_PAR_PROTOCOL_BOOT_MODE;
+    }
+
+    if (HID_HostWriteDev (p_cb->hid_handle,
+                       p_data->api_sndcmd.t_type,
+                       p_data->api_sndcmd.param,
+                       p_data->api_sndcmd.data,
+                       p_data->api_sndcmd.rpt_id,
+                       p_data->api_sndcmd.p_data) != HID_SUCCESS)
+    {
+        APPL_TRACE_ERROR0("HID_HostWriteDev Error ");
+        cbdata.status = BTA_HH_ERR;
+
+        if (p_data->api_sndcmd.t_type != HID_TRANS_CONTROL &&
+            p_data->api_sndcmd.t_type != HID_TRANS_DATA)
+            (* bta_hh_cb.p_cback)(event, (tBTA_HH *)&cbdata);
+        else if (p_data->api_sndcmd.param == BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG)
+            (* bta_hh_cb.p_cback)(BTA_HH_VC_UNPLUG_EVT, (tBTA_HH *)&cbdata);
+    }
+    else
+    {
+
+        switch(p_data->api_sndcmd.t_type)
+        {
+        case HID_TRANS_SET_PROTOCOL:
+            /* fall through */
+        case HID_TRANS_GET_REPORT:
+            /* fall through */
+        case HID_TRANS_SET_REPORT:
+            /* fall through */
+        case HID_TRANS_GET_PROTOCOL:
+            /* fall through */
+        case HID_TRANS_GET_IDLE:
+            /* fall through */
+        case HID_TRANS_SET_IDLE:/* set w4_handsk event name for callback function use */
+            p_cb->w4_evt = event;
+            break;
+        case HID_TRANS_DATA:  /* output report */
+            /* fall through */
+        case HID_TRANS_CONTROL:
+            /* no handshake event will be generated */
+            /* if VC_UNPLUG is issued, set flag */
+            if (p_data->api_sndcmd.param == BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG)
+                p_cb->vp = TRUE;
+
+            break;
+        /* currently not expected */
+        case HID_TRANS_DATAC:
+        default:
+            APPL_TRACE_DEBUG1("bta_hh_write_dev_act:: cmd type = %d",
+                            p_data->api_sndcmd.t_type);
+            break;
+        }
+
+        /* if not control type transaction, notify PM for energy control */
+        if (p_data->api_sndcmd.t_type != HID_TRANS_CONTROL)
+        {
+            /* inform PM for mode change */
+            bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+            bta_sys_idle(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+        }
+        else if (p_data->api_sndcmd.param == BTA_HH_CTRL_SUSPEND)
+        {
+			bta_sys_sco_close(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+        }
+        else if (p_data->api_sndcmd.param == BTA_HH_CTRL_EXIT_SUSPEND)
+        {
+            bta_sys_busy(BTA_ID_HH, p_cb->app_id, p_cb->addr);
+        }
+    }
+
+
+    return;
+}
+
+/*****************************************************************************
+**  Static Function
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         bta_hh_cback
+**
+** Description      BTA HH callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hh_cback (UINT8 dev_handle, UINT8 event, UINT32 data,
+                          BT_HDR *pdata)
+{
+    tBTA_HH_CBACK_DATA    *p_buf = NULL;
+    UINT16  sm_event = BTA_HH_INVALID_EVT;
+    UINT8   xx = 0;
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG1("bta_hh_cback::HID_event [%s]", bta_hh_hid_event_name(event));
+#endif
+
+    switch (event)
+    {
+    case HID_HDEV_EVT_OPEN:
+        sm_event = BTA_HH_INT_OPEN_EVT;
+        break;
+    case HID_HDEV_EVT_CLOSE:
+        sm_event = BTA_HH_INT_CLOSE_EVT;
+        break;
+    case HID_HDEV_EVT_INTR_DATA:
+        sm_event = BTA_HH_INT_DATA_EVT;
+        break;
+    case HID_HDEV_EVT_HANDSHAKE:
+        sm_event = BTA_HH_INT_HANDSK_EVT;
+        break;
+    case HID_HDEV_EVT_CTRL_DATA:
+        sm_event = BTA_HH_INT_CTRL_DATA;
+        break;
+    case HID_HDEV_EVT_RETRYING:
+        break;
+    case HID_HDEV_EVT_INTR_DATC:
+    case HID_HDEV_EVT_CTRL_DATC:
+        /* Unhandled events: Free buffer for DATAC */
+        utl_freebuf((void **)&pdata);
+        break;
+    case HID_HDEV_EVT_VC_UNPLUG:
+        for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx++)
+        {
+            if (bta_hh_cb.kdev[xx].hid_handle == dev_handle)
+            {
+               bta_hh_cb.kdev[xx].vp = TRUE;
+               break;
+            }
+        }
+        break;
+    }
+
+    if (sm_event != BTA_HH_INVALID_EVT &&
+        (p_buf = (tBTA_HH_CBACK_DATA *)GKI_getbuf(sizeof(tBTA_HH_CBACK_DATA) +
+                    sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->hdr.event  = sm_event;
+        p_buf->hdr.layer_specific = (UINT16)dev_handle;
+        p_buf->data       = data;
+        p_buf->p_data     = pdata;
+
+        bta_sys_sendmsg(p_buf);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         bta_hh_get_trans_status
+**
+** Description      translate a handshake result code into BTA HH
+**                  status code
+**
+*******************************************************************************/
+static tBTA_HH_STATUS bta_hh_get_trans_status(UINT32 result)
+{
+    switch(result)
+    {
+    case HID_PAR_HANDSHAKE_RSP_SUCCESS :                /*   (0) */
+        return BTA_HH_OK;
+    case HID_PAR_HANDSHAKE_RSP_NOT_READY :              /*   (1) */
+    case HID_PAR_HANDSHAKE_RSP_ERR_INVALID_REP_ID:      /*   (2) */
+    case HID_PAR_HANDSHAKE_RSP_ERR_UNSUPPORTED_REQ :    /*   (3) */
+    case HID_PAR_HANDSHAKE_RSP_ERR_INVALID_PARAM :      /*   (4) */
+        return (tBTA_HH_STATUS)result;
+    case HID_PAR_HANDSHAKE_RSP_ERR_UNKNOWN :            /*   (14) */
+    case HID_PAR_HANDSHAKE_RSP_ERR_FATAL  :             /*   (15) */
+    default:
+        return BTA_HH_HS_ERROR;
+        break;
+    }
+}
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+
+#if (defined BTA_HH_DEBUG && BTA_HH_DEBUG == TRUE)
+static char* bta_hh_get_w4_event(UINT16 event)
+{
+    switch (event)
+    {
+    case BTA_HH_GET_RPT_EVT:
+        return "BTA_HH_GET_RPT_EVT";
+    case BTA_HH_SET_RPT_EVT:
+        return "BTA_HH_SET_RPT_EVT";
+    case BTA_HH_GET_PROTO_EVT:
+        return "BTA_HH_GET_PROTO_EVT";
+    case BTA_HH_SET_PROTO_EVT:
+        return "BTA_HH_SET_PROTO_EVT";
+    case BTA_HH_GET_IDLE_EVT:
+        return "BTA_HH_GET_IDLE_EVT";
+    case BTA_HH_SET_IDLE_EVT:
+        return "BTA_HH_SET_IDLE_EVT";
+    case BTA_HH_OPEN_EVT:
+        return "BTA_HH_OPEN_EVT";
+    default:
+        return "Unknown event";
+    }
+
+}
+
+static char * bta_hh_hid_event_name(UINT16 event)
+{
+    switch (event)
+    {
+    case HID_HDEV_EVT_OPEN:
+        return "HID_HDEV_EVT_OPEN";
+    case HID_HDEV_EVT_CLOSE:
+        return "HID_HDEV_EVT_CLOSE";
+    case HID_HDEV_EVT_RETRYING:
+        return "HID_HDEV_EVT_RETRYING";
+    case HID_HDEV_EVT_INTR_DATA:
+        return "HID_HDEV_EVT_INTR_DATA";
+    case HID_HDEV_EVT_INTR_DATC:
+        return "HID_HDEV_EVT_INTR_DATC";
+    case HID_HDEV_EVT_CTRL_DATA:
+        return "HID_HDEV_EVT_CTRL_DATA";
+    case HID_HDEV_EVT_CTRL_DATC:
+        return "HID_HDEV_EVT_CTRL_DATC";
+    case HID_HDEV_EVT_HANDSHAKE:
+        return "HID_HDEV_EVT_HANDSHAKE";
+    case HID_HDEV_EVT_VC_UNPLUG:
+        return "HID_HDEV_EVT_VC_UNPLUG";
+    default:
+        return "Unknown HID event";
+    }
+}
+#endif
+#endif /* BTA_HH_INCLUDED */
+
diff --git a/bta/hh/bta_hh_api.c b/bta/hh/bta_hh_api.c
new file mode 100644
index 0000000..300fc6f
--- /dev/null
+++ b/bta/hh/bta_hh_api.c
@@ -0,0 +1,447 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HID HOST API in the subsystem of BTA.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bta_hh_api.h"
+#include "bta_hh_int.h"
+#include "l2c_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_hh_reg =
+{
+    bta_hh_hdl_event,
+    BTA_HhDisable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_HhEnable
+**
+** Description      Enable the HID host.  This function must be called before
+**                  any other functions in the HID host API are called. When the
+**                  enable operation is complete the callback function will be
+**                  called with BTA_HH_ENABLE_EVT.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhEnable(tBTA_SEC sec_mask, BOOLEAN ucd_enabled, tBTA_HH_CBACK *p_cback)
+{
+    tBTA_HH_API_ENABLE *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_HH, &bta_hh_reg);
+    GKI_sched_unlock();
+
+    APPL_TRACE_ERROR0("Calling BTA_HhEnable");
+    p_buf = (tBTA_HH_API_ENABLE *)GKI_getbuf((UINT16)sizeof(tBTA_HH_API_ENABLE));
+
+    if (p_buf != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_HH_API_ENABLE));
+
+        p_buf->hdr.event = BTA_HH_API_ENABLE_EVT;
+        p_buf->p_cback = p_cback;
+        p_buf->sec_mask = sec_mask;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhDisable
+**
+** Description      Disable the HID host. If the server is currently
+**                  connected, the connection will be closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    bta_sys_deregister(BTA_ID_HH);
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_HH_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhClose
+**
+** Description      Disconnect a connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhClose(UINT8 dev_handle)
+{
+    BT_HDR    *p_buf;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)sizeof(BT_HDR))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(BT_HDR));
+        p_buf->event            = BTA_HH_API_CLOSE_EVT;
+        p_buf->layer_specific   = (UINT16) dev_handle;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhOpen
+**
+** Description      Connect to a device of specified BD address in specified
+**                  protocol mode and security level.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhOpen(BD_ADDR dev_bda, tBTA_HH_PROTO_MODE mode, tBTA_SEC sec_mask)
+{
+    tBTA_HH_API_CONN *p_buf;
+
+    p_buf = (tBTA_HH_API_CONN *)GKI_getbuf((UINT16)sizeof(tBTA_HH_API_CONN));
+
+    if (p_buf!= NULL)
+    {
+        memset((void *)p_buf, 0, sizeof(tBTA_HH_API_CONN));
+
+        p_buf->hdr.event            = BTA_HH_API_OPEN_EVT;
+        p_buf->hdr.layer_specific   = BTA_HH_INVALID_HANDLE;
+        p_buf->sec_mask             = sec_mask;
+        p_buf->mode                 = mode;
+        bdcpy(p_buf->bd_addr, dev_bda);
+
+        bta_sys_sendmsg((void *)p_buf);
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("No resource to send HID host Connect request.");
+    }
+}
+
+/*******************************************************************************
+**
+** Function  bta_hh_snd_write_dev
+**
+*******************************************************************************/
+static void bta_hh_snd_write_dev(UINT8 dev_handle, UINT8 t_type, UINT8 param,
+                                 UINT16 data, UINT8 rpt_id, BT_HDR  *p_data)
+{
+    tBTA_HH_CMD_DATA *p_buf;
+    UINT16          len = (UINT16) (sizeof(tBTA_HH_CMD_DATA) );
+
+    if ((p_buf = (tBTA_HH_CMD_DATA *)GKI_getbuf(len))!= NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_HH_CMD_DATA));
+
+        p_buf->hdr.event = BTA_HH_API_WRITE_DEV_EVT;
+        p_buf->hdr.layer_specific   = (UINT16) dev_handle;
+        p_buf->t_type   = t_type;
+        p_buf->data     = data;
+        p_buf->param    = param;
+        p_buf->p_data   = p_data;
+        p_buf->rpt_id   = rpt_id;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+/*******************************************************************************
+**
+** Function         BTA_HhSetReport
+**
+** Description      send SET_REPORT to device.
+**
+** Parameter        dev_handle: device handle
+**                  r_type:     report type, could be BTA_HH_RPTT_OUTPUT or
+**                              BTA_HH_RPTT_FEATURE.
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhSetReport(UINT8 dev_handle, tBTA_HH_RPT_TYPE r_type, BT_HDR *p_data)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_REPORT, r_type, 0, 0, p_data);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhGetReport
+**
+** Description      Send a GET_REPORT to HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhGetReport(UINT8 dev_handle, tBTA_HH_RPT_TYPE r_type, UINT8 rpt_id, UINT16 buf_size)
+{
+    UINT8 param = (buf_size) ? (r_type | 0x08) : r_type;
+
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_REPORT, param,
+                        buf_size, rpt_id, NULL);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhSetProtoMode
+**
+** Description      This function set the protocol mode at specified HID handle
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhSetProtoMode(UINT8 dev_handle, tBTA_HH_PROTO_MODE p_type)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_PROTOCOL, (UINT8)p_type,
+                        0, 0, NULL);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhGetProtoMode
+**
+** Description      This function get protocol mode information.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhGetProtoMode(UINT8 dev_handle)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_PROTOCOL, 0, 0, 0, NULL);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhSetIdle
+**
+** Description      send SET_IDLE to device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhSetIdle(UINT8 dev_handle, UINT16 idle_rate)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_SET_IDLE, 0, idle_rate, 0, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetIdle
+**
+** Description      Send a GET_IDLE from HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhGetIdle(UINT8 dev_handle)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_GET_IDLE, 0, 0, 0, NULL);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhSendCtrl
+**
+** Description      Send a control command to HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhSendCtrl(UINT8 dev_handle, tBTA_HH_TRANS_CTRL_TYPE c_type)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_CONTROL, (UINT8)c_type, 0, 0, NULL);
+}
+/*******************************************************************************
+**
+** Function         BTA_HhSendData
+**
+** Description      This function send DATA transaction to HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhSendData(UINT8 dev_handle, BD_ADDR dev_bda, BT_HDR  *p_data)
+{
+    bta_hh_snd_write_dev(dev_handle, HID_TRANS_DATA, BTA_HH_RPTT_OUTPUT, 0, 0, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetDscpInfo
+**
+** Description      Get HID device report descriptor
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhGetDscpInfo(UINT8 dev_handle)
+{
+    BT_HDR    *p_buf;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)sizeof(BT_HDR))) != NULL)
+    {
+        memset(p_buf, 0, sizeof(BT_HDR));
+        p_buf->event            = BTA_HH_API_GET_DSCP_EVT;
+        p_buf->layer_specific   = (UINT16) dev_handle;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HhAddDev
+**
+** Description      Add a virtually cabled device into HID-Host device list
+**                  to manage and assign a device handle for future API call,
+**                  host applciation call this API at start-up to initialize its
+**                  virtually cabled devices.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhAddDev(BD_ADDR bda, tBTA_HH_ATTR_MASK attr_mask, UINT8 sub_class,
+                  UINT8 app_id, tBTA_HH_DEV_DSCP_INFO dscp_info)
+{
+    tBTA_HH_MAINT_DEV    *p_buf;
+    UINT16  len = sizeof(tBTA_HH_MAINT_DEV) + dscp_info.descriptor.dl_len;
+
+    p_buf = (tBTA_HH_MAINT_DEV *)GKI_getbuf(len);
+
+    if (p_buf != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_HH_MAINT_DEV));
+
+        p_buf->hdr.event            = BTA_HH_API_MAINT_DEV_EVT;
+        p_buf->sub_event            = BTA_HH_ADD_DEV_EVT;
+        p_buf->hdr.layer_specific   = BTA_HH_INVALID_HANDLE;
+
+        p_buf->attr_mask            = (UINT16) attr_mask;
+        p_buf->sub_class            = sub_class;
+        p_buf->app_id               = app_id;
+        bdcpy(p_buf->bda, bda);
+
+        memcpy(&p_buf->dscp_info, &dscp_info, sizeof(tBTA_HH_DEV_DSCP_INFO));
+        if ( dscp_info.descriptor.dl_len != 0 && dscp_info.descriptor.dsc_list)
+        {
+            p_buf->dscp_info.descriptor.dl_len =  dscp_info.descriptor.dl_len;
+            p_buf->dscp_info.descriptor.dsc_list = (UINT8 *)(p_buf + 1);
+            memcpy(p_buf->dscp_info.descriptor.dsc_list, dscp_info.descriptor.dsc_list, dscp_info.descriptor.dl_len);
+        }
+        else
+        {
+            p_buf->dscp_info.descriptor.dsc_list = NULL;
+            p_buf->dscp_info.descriptor.dl_len = 0;
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+/*******************************************************************************
+**
+** Function         BTA_HhRemoveDev
+**
+** Description      Remove a device from the HID host devices list.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhRemoveDev(UINT8 dev_handle )
+{
+    tBTA_HH_MAINT_DEV    *p_buf;
+
+    p_buf = (tBTA_HH_MAINT_DEV *)GKI_getbuf((UINT16)sizeof(tBTA_HH_MAINT_DEV));
+
+    if (p_buf != NULL)
+    {
+        memset(p_buf, 0, sizeof(tBTA_HH_MAINT_DEV));
+
+        p_buf->hdr.event            = BTA_HH_API_MAINT_DEV_EVT;
+        p_buf->sub_event            = BTA_HH_RMV_DEV_EVT;
+        p_buf->hdr.layer_specific   = (UINT16) dev_handle;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************/
+/*                          Utility Function                                   */
+/*******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         BTA_HhParseBootRpt
+**
+** Description      This utility function parse a boot mode report.
+**                  For keyboard report, report data will carry the keycode max
+**                  up to 6 key press in one report. Application need to convert
+**                  the keycode into keypress character according to keyboard
+**                  language.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HhParseBootRpt(tBTA_HH_BOOT_RPT *p_data, UINT8 *p_report,
+                        UINT16 report_len)
+{
+    p_data->dev_type = BTA_HH_DEVT_UNKNOWN;
+
+    if (p_report)
+    {
+        /* first byte is report ID */
+        switch (p_report[0])
+        {
+        case BTA_HH_KEYBD_RPT_ID: /* key board report ID */
+            p_data->dev_type = p_report[0];
+            bta_hh_parse_keybd_rpt(p_data, p_report + 1, (UINT16)(report_len -1));
+            break;
+
+        case BTA_HH_MOUSE_RPT_ID: /* mouse report ID */
+            p_data->dev_type = p_report[0];
+            bta_hh_parse_mice_rpt(p_data, p_report + 1, (UINT16)(report_len - 1));
+            break;
+
+        default:
+            APPL_TRACE_DEBUG1("Unknown boot report: %d", p_report[0]);;
+            break;
+        }
+    }
+
+    return;
+}
+
+#endif /* BTA_HH_INCLUDED */
diff --git a/bta/hh/bta_hh_cfg.c b/bta/hh/bta_hh_cfg.c
new file mode 100644
index 0000000..62a07ad
--- /dev/null
+++ b/bta/hh/bta_hh_cfg.c
@@ -0,0 +1,65 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the BTA Hid
+ *  Host.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "bta_hh_api.h"
+
+/* max number of device types supported by BTA */
+#define BTA_HH_MAX_DEVT_SPT         7
+
+/* size of database for service discovery */
+#ifndef BTA_HH_DISC_BUF_SIZE
+#define BTA_HH_DISC_BUF_SIZE        GKI_MAX_BUF_SIZE
+#endif
+
+/* application ID(none-zero) for each type of device */
+#define BTA_HH_APP_ID_MI            1
+#define BTA_HH_APP_ID_KB            2
+#define BTA_HH_APP_ID_RMC           3
+#define BTA_HH_APP_ID_3DSG          4
+
+
+/* The type of devices supported by BTA HH and corresponding application ID */
+tBTA_HH_SPT_TOD p_devt_list[BTA_HH_MAX_DEVT_SPT] =
+{
+    {BTA_HH_DEVT_MIC, BTA_HH_APP_ID_MI},
+    {BTA_HH_DEVT_KBD, BTA_HH_APP_ID_KB},
+    {BTA_HH_DEVT_KBD|BTA_HH_DEVT_MIC, BTA_HH_APP_ID_KB},
+    {BTA_HH_DEVT_RMC, BTA_HH_APP_ID_RMC},
+    {BTA_HH_DEVT_RMC | BTA_HH_DEVT_KBD, BTA_HH_APP_ID_RMC},
+    {BTA_HH_DEVT_MIC | BTA_HH_DEVT_DGT, BTA_HH_APP_ID_MI},
+    {BTA_HH_DEVT_UNKNOWN, BTA_HH_APP_ID_3DSG}
+};
+
+
+const tBTA_HH_CFG bta_hh_cfg =
+{
+    BTA_HH_MAX_DEVT_SPT,            /* number of supported type of devices */
+    p_devt_list,                    /* ToD & AppID list */
+    BTA_HH_DISC_BUF_SIZE            /* HH SDP discovery database size */
+};
+
+
+tBTA_HH_CFG *p_bta_hh_cfg = (tBTA_HH_CFG *)&bta_hh_cfg;
diff --git a/bta/hh/bta_hh_int.h b/bta/hh/bta_hh_int.h
new file mode 100644
index 0000000..f3a8e54
--- /dev/null
+++ b/bta/hh/bta_hh_int.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains BTA HID Host internal definitions
+ *
+ ******************************************************************************/
+
+#ifndef BTA_HH_INT_H
+#define BTA_HH_INT_H
+
+#include "bta_sys.h"
+#include "bd.h"
+#include "utl.h"
+#include "bta_hh_api.h"
+
+/* can be moved to bta_api.h */
+#define BTA_HH_MAX_RPT_CHARS    8
+
+
+/* state machine events, these events are handled by the state machine */
+enum
+{
+    BTA_HH_API_OPEN_EVT     = BTA_SYS_EVT_START(BTA_ID_HH),
+    BTA_HH_API_CLOSE_EVT,
+    BTA_HH_INT_OPEN_EVT,
+    BTA_HH_INT_CLOSE_EVT,
+    BTA_HH_INT_DATA_EVT,
+    BTA_HH_INT_CTRL_DATA,
+    BTA_HH_INT_HANDSK_EVT,
+    BTA_HH_SDP_CMPL_EVT,
+    BTA_HH_API_WRITE_DEV_EVT,
+    BTA_HH_API_GET_DSCP_EVT,
+    BTA_HH_API_MAINT_DEV_EVT,
+    BTA_HH_OPEN_CMPL_EVT,
+
+    /* not handled by execute state machine */
+    BTA_HH_API_ENABLE_EVT,
+    BTA_HH_API_DISABLE_EVT,
+    BTA_HH_DISC_CMPL_EVT
+};
+typedef UINT16 tBTA_HH_INT_EVT;         /* HID host internal events */
+
+#define BTA_HH_INVALID_EVT      (BTA_HH_DISC_CMPL_EVT + 1)
+
+/* event used to map between BTE event and BTA event */
+#define BTA_HH_FST_TRANS_CB_EVT         BTA_HH_GET_RPT_EVT
+#define BTA_HH_FST_BTE_TRANS_EVT        HID_TRANS_GET_REPORT
+
+/* sub event code used for device maintainence API call */
+#define BTA_HH_ADD_DEV          0
+#define BTA_HH_REMOVE_DEV       1
+
+/* state machine states */
+enum
+{
+    BTA_HH_NULL_ST,
+    BTA_HH_IDLE_ST,
+    BTA_HH_W4_CONN_ST,
+    BTA_HH_CONN_ST
+};
+typedef UINT8 tBTA_HH_STATE;
+
+/* data structure used to send a command/data to HID device */
+typedef struct
+{
+    BT_HDR           hdr;
+    UINT8            t_type;
+    UINT8            param;
+    UINT8            rpt_id;
+    UINT16           data;
+    BT_HDR           *p_data;
+}tBTA_HH_CMD_DATA;
+
+/* data type for BTA_HH_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               sec_mask;
+    UINT8               service_name[BTA_SERVICE_NAME_LEN+1];
+    tBTA_HH_CBACK   *p_cback;
+} tBTA_HH_API_ENABLE;
+
+typedef struct
+{
+    BT_HDR          hdr;
+    BD_ADDR         bd_addr;
+    UINT8           sec_mask;
+    tBTA_HH_PROTO_MODE  mode;
+}tBTA_HH_API_CONN;
+
+/* internal event data from BTE HID callback */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT32          data;
+    BT_HDR          *p_data;
+}tBTA_HH_CBACK_DATA;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    BD_ADDR             bda;
+    UINT16              attr_mask;
+    UINT16              sub_event;
+    UINT8               sub_class;
+    UINT8               app_id;
+    tBTA_HH_DEV_DSCP_INFO      dscp_info;
+}tBTA_HH_MAINT_DEV;
+
+/* union of all event data types */
+typedef union
+{
+    BT_HDR                   hdr;
+    tBTA_HH_API_ENABLE       api_enable;
+    tBTA_HH_API_CONN         api_conn;
+    tBTA_HH_CMD_DATA         api_sndcmd;
+    tBTA_HH_CBACK_DATA       hid_cback;
+    tBTA_HH_STATUS           status;
+    tBTA_HH_MAINT_DEV        api_maintdev;
+} tBTA_HH_DATA;
+
+/* device control block */
+typedef struct
+{
+    tBTA_HH_DEV_DSCP_INFO  dscp_info;      /* report descriptor and DI information */
+    BD_ADDR             addr;           /* BD-Addr of the HID device */
+    UINT16              attr_mask;      /* attribute mask */
+    UINT16              w4_evt;         /* W4_handshake event name */
+    UINT8               index;          /* index number referenced to handle index */
+    UINT8               sub_class;      /* Cod sub class */
+    UINT8               sec_mask;       /* security mask */
+    UINT8               app_id;         /* application ID for this connection */
+    UINT8               hid_handle;     /* device handle */
+    BOOLEAN             vp;             /* virtually unplug flag */
+    BOOLEAN             in_use;         /* control block currently in use */
+    BOOLEAN             incoming_conn;  /* is incoming connection? */
+    BOOLEAN             opened;         /* TRUE if device successfully opened HID connection */
+    tBTA_HH_PROTO_MODE  mode;           /* protocol mode */
+    tBTA_HH_STATE       state;          /* CB state */
+} tBTA_HH_DEV_CB;
+
+/* key board parsing control block */
+typedef struct
+{
+    BOOLEAN             mod_key[4]; /* ctrl, shift(upper), Alt, GUI */
+    BOOLEAN             num_lock;
+    BOOLEAN             caps_lock;
+    UINT8               last_report[BTA_HH_MAX_RPT_CHARS];
+} tBTA_HH_KB_CB;
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+typedef struct
+{
+    tBTA_HH_KB_CB           kb_cb;                  /* key board control block,
+                                                       suppose BTA will connect
+                                                       to only one keyboard at
+                                                        the same time */
+    tBTA_HH_DEV_CB          kdev[BTA_HH_MAX_KNOWN]; /* device control block */
+    tBTA_HH_DEV_CB*         p_cur;              /* current device control
+                                                       block idx, used in sdp */
+    UINT8                   cb_index[BTA_HH_MAX_KNOWN]; /* maintain a CB index
+                                                        map to dev handle */
+    tBTA_HH_CBACK       *p_cback;               /* Application callbacks */
+    tSDP_DISCOVERY_DB*      p_disc_db;
+    UINT8                   trace_level;            /* tracing level */
+    UINT8                   cnt_num;                /* connected device number */
+    BOOLEAN                 w4_disable;             /* w4 disable flag */
+}
+tBTA_HH_CB;
+
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_HH_CB  bta_hh_cb;
+#else
+extern tBTA_HH_CB *bta_hh_cb_ptr;
+#define bta_hh_cb (*bta_hh_cb_ptr)
+#endif
+
+/* from bta_hh_cfg.c */
+extern tBTA_HH_CFG *p_bta_hh_cfg;
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+extern BOOLEAN bta_hh_hdl_event(BT_HDR *p_msg);
+extern void bta_hh_sm_execute(tBTA_HH_DEV_CB *p_cb, UINT16 event,
+                              tBTA_HH_DATA *p_data);
+
+/* action functions */
+extern void bta_hh_api_disc_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_open_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_close_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_data_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data);
+extern void bta_hh_ctrl_dat_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA * p_data);
+extern void bta_hh_start_sdp(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_sdp_cmpl(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_write_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_get_dscp_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_handsk_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_maint_dev_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+extern void bta_hh_open_cmpl_act(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+
+/* utility functions */
+extern UINT8  bta_hh_find_cb(BD_ADDR bda);
+extern void bta_hh_parse_keybd_rpt(tBTA_HH_BOOT_RPT *p_kb_data,
+             UINT8 *p_report, UINT16 report_len);
+extern void bta_hh_parse_mice_rpt(tBTA_HH_BOOT_RPT *p_kb_data,
+                                  UINT8 *p_report, UINT16 report_len);
+extern BOOLEAN bta_hh_tod_spt(tBTA_HH_DEV_CB *p_cb,UINT8 sub_class);
+extern void bta_hh_clean_up_kdev(tBTA_HH_DEV_CB *p_cb);
+
+extern void bta_hh_add_device_to_list(tBTA_HH_DEV_CB *p_cb, UINT8 handle,
+                                      UINT16 attr_mask,
+                                      tHID_DEV_DSCP_INFO *p_dscp_info,
+                                      UINT8 sub_class, UINT16 max_latency, UINT16 min_tout, UINT8 app_id);
+extern void bta_hh_update_di_info(tBTA_HH_DEV_CB *p_cb, UINT16 vendor_id, UINT16 product_id,
+                           UINT16 version);
+
+/* action functions used outside state machine */
+extern void bta_hh_api_enable(tBTA_HH_DATA *p_data);
+extern void bta_hh_api_disable(void);
+extern void bta_hh_disc_cmpl(void);
+
+
+#if BTA_HH_DEBUG
+extern void bta_hh_trace_dev_db(void);
+#endif
+
+#endif
+
diff --git a/bta/hh/bta_hh_main.c b/bta/hh/bta_hh_main.c
new file mode 100644
index 0000000..a1d0ad2
--- /dev/null
+++ b/bta/hh/bta_hh_main.c
@@ -0,0 +1,441 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HID host main functions and state machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "bta_hh_api.h"
+#include "bta_hh_int.h"
+#include "gki.h"
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_HH_API_DISC_ACT,        /* HID host process API close action    */
+    BTA_HH_OPEN_ACT,            /* HID host process BTA_HH_EVT_OPEN     */
+    BTA_HH_CLOSE_ACT,           /* HID host process BTA_HH_EVT_CLOSE    */
+    BTA_HH_DATA_ACT,            /* HID host receive data report         */
+    BTA_HH_CTRL_DAT_ACT,
+    BTA_HH_HANDSK_ACT,
+    BTA_HH_START_SDP,           /* HID host inquery                     */
+    BTA_HH_SDP_CMPL,
+    BTA_HH_WRITE_DEV_ACT,
+    BTA_HH_GET_DSCP_ACT,
+    BTA_HH_MAINT_DEV_ACT,
+    BTA_HH_OPEN_CMPL_ACT,
+    BTA_HH_NUM_ACTIONS
+};
+
+#define BTA_HH_IGNORE       BTA_HH_NUM_ACTIONS
+
+/* type for action functions */
+typedef void (*tBTA_HH_ACTION)(tBTA_HH_DEV_CB *p_cb, tBTA_HH_DATA *p_data);
+
+/* action functions */
+const tBTA_HH_ACTION bta_hh_action[] =
+{
+    bta_hh_api_disc_act,
+    bta_hh_open_act,
+    bta_hh_close_act,
+    bta_hh_data_act,
+    bta_hh_ctrl_dat_act,
+    bta_hh_handsk_act,
+    bta_hh_start_sdp,
+    bta_hh_sdp_cmpl,
+    bta_hh_write_dev_act,
+    bta_hh_get_dscp_act,
+    bta_hh_maint_dev_act,
+    bta_hh_open_cmpl_act
+};
+
+/* state table information */
+#define BTA_HH_ACTION                   0       /* position of action */
+#define BTA_HH_NEXT_STATE               1       /* position of next state */
+#define BTA_HH_NUM_COLS                 2       /* number of columns */
+
+/* state table for idle state */
+const UINT8 bta_hh_st_idle[][BTA_HH_NUM_COLS] =
+{
+/* Event                          Action                    Next state */
+/* BTA_HH_API_OPEN_EVT      */    {BTA_HH_START_SDP,     BTA_HH_W4_CONN_ST },
+/* BTA_HH_API_CLOSE_EVT     */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_OPEN_EVT      */    {BTA_HH_OPEN_ACT,      BTA_HH_W4_CONN_ST },
+/* BTA_HH_INT_CLOSE_EVT     */    {BTA_HH_CLOSE_ACT,     BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_DATA_EVT      */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_CTRL_DATA     */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_HANDSK_EVT    */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_SDP_CMPL_EVT      */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_API_WRITE_DEV_EVT */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_API_GET_DSCP_EVT  */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_API_MAINT_DEV_EVT */    {BTA_HH_MAINT_DEV_ACT, BTA_HH_IDLE_ST    },
+/* BTA_HH_OPEN_CMPL_EVT        */    {BTA_HH_IGNORE,         BTA_HH_IDLE_ST    }
+
+};
+
+
+const UINT8 bta_hh_st_w4_conn[][BTA_HH_NUM_COLS] =
+{
+/* Event                          Action                 Next state */
+/* BTA_HH_API_OPEN_EVT      */    {BTA_HH_IGNORE,        BTA_HH_W4_CONN_ST },
+/* BTA_HH_API_CLOSE_EVT     */    {BTA_HH_IGNORE,        BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_OPEN_EVT      */    {BTA_HH_OPEN_ACT,      BTA_HH_W4_CONN_ST },
+/* BTA_HH_INT_CLOSE_EVT     */    {BTA_HH_CLOSE_ACT,     BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_DATA_EVT      */    {BTA_HH_IGNORE,        BTA_HH_W4_CONN_ST },
+/* BTA_HH_INT_CTRL_DATA     */    {BTA_HH_IGNORE,        BTA_HH_W4_CONN_ST },
+/* BTA_HH_INT_HANDSK_EVT    */    {BTA_HH_IGNORE,        BTA_HH_W4_CONN_ST },
+/* BTA_HH_SDP_CMPL_EVT      */    {BTA_HH_SDP_CMPL,      BTA_HH_W4_CONN_ST },
+/* BTA_HH_API_WRITE_DEV_EVT */    {BTA_HH_IGNORE  ,      BTA_HH_W4_CONN_ST },
+/* BTA_HH_API_GET_DSCP_EVT  */    {BTA_HH_IGNORE,        BTA_HH_W4_CONN_ST },
+/* BTA_HH_API_MAINT_DEV_EVT */    {BTA_HH_MAINT_DEV_ACT, BTA_HH_IDLE_ST    },
+/* BTA_HH_OPEN_CMPL_EVT        */    {BTA_HH_OPEN_CMPL_ACT, BTA_HH_CONN_ST    }
+};
+
+
+const UINT8 bta_hh_st_connected[][BTA_HH_NUM_COLS] =
+{
+/* Event                          Action                 Next state */
+/* BTA_HH_API_OPEN_EVT      */    {BTA_HH_IGNORE,        BTA_HH_CONN_ST    },
+/* BTA_HH_API_CLOSE_EVT     */    {BTA_HH_API_DISC_ACT,  BTA_HH_CONN_ST    },
+/* BTA_HH_INT_OPEN_EVT      */    {BTA_HH_OPEN_ACT,      BTA_HH_CONN_ST    },
+/* BTA_HH_INT_CLOSE_EVT     */    {BTA_HH_CLOSE_ACT,     BTA_HH_IDLE_ST    },
+/* BTA_HH_INT_DATA_EVT      */    {BTA_HH_DATA_ACT,      BTA_HH_CONN_ST    },
+/* BTA_HH_INT_CTRL_DATA     */    {BTA_HH_CTRL_DAT_ACT,  BTA_HH_CONN_ST    },
+/* BTA_HH_INT_HANDSK_EVT    */    {BTA_HH_HANDSK_ACT,    BTA_HH_CONN_ST    },
+/* BTA_HH_SDP_CMPL_EVT      */    {BTA_HH_IGNORE,         BTA_HH_CONN_ST       },
+/* BTA_HH_API_WRITE_DEV_EVT */    {BTA_HH_WRITE_DEV_ACT, BTA_HH_CONN_ST    },
+/* BTA_HH_API_GET_DSCP_EVT  */    {BTA_HH_GET_DSCP_ACT,  BTA_HH_CONN_ST    },
+/* BTA_HH_API_MAINT_DEV_EVT */    {BTA_HH_MAINT_DEV_ACT, BTA_HH_CONN_ST    },
+/* BTA_HH_OPEN_CMPL_EVT        */    {BTA_HH_IGNORE,         BTA_HH_CONN_ST    }
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_HH_ST_TBL)[BTA_HH_NUM_COLS];
+
+/* state table */
+const tBTA_HH_ST_TBL bta_hh_st_tbl[] =
+{
+    bta_hh_st_idle,
+    bta_hh_st_w4_conn,
+    bta_hh_st_connected
+};
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_HH_CB  bta_hh_cb;
+#endif
+/*****************************************************************************
+** Static functions
+*****************************************************************************/
+#if BTA_HH_DEBUG == TRUE
+static char *bta_hh_evt_code(tBTA_HH_INT_EVT evt_code);
+static char *bta_hh_state_code(tBTA_HH_STATE state_code);
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_hh_sm_execute
+**
+** Description      State machine event handling function for HID Host
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_sm_execute(tBTA_HH_DEV_CB *p_cb, UINT16 event, tBTA_HH_DATA * p_data)
+{
+    tBTA_HH_ST_TBL  state_table;
+    UINT8           action;
+    tBTA_HH         cback_data;
+    tBTA_HH_EVT     cback_event = 0;
+#if BTA_HH_DEBUG == TRUE
+    tBTA_HH_STATE   in_state ;
+    UINT16          debug_event = event;
+#endif
+
+    memset(&cback_data, 0, sizeof(tBTA_HH));
+
+    /* handle exception, no valid control block was found */
+    if (!p_cb)
+    {
+        /* BTA HH enabled already? otherwise ignore the event although it's bad*/
+        if (bta_hh_cb.p_cback != NULL)
+        {
+            switch (event)
+            {
+            /* no control block available for new connection */
+            case BTA_HH_API_OPEN_EVT:
+                cback_event = BTA_HH_OPEN_EVT;
+                /* build cback data */
+                bdcpy(cback_data.conn.bda, ((tBTA_HH_API_CONN *)p_data)->bd_addr);
+                cback_data.conn.status  = BTA_HH_ERR_DB_FULL;
+                cback_data.conn.handle  = BTA_HH_INVALID_HANDLE;
+                break;
+            /* DB full, BTA_HhAddDev */
+            case BTA_HH_API_MAINT_DEV_EVT:
+                cback_event = p_data->api_maintdev.sub_event;
+
+                if (p_data->api_maintdev.sub_event == BTA_HH_ADD_DEV_EVT)
+                {
+                    bdcpy(cback_data.dev_info.bda, p_data->api_maintdev.bda);
+                    cback_data.dev_info.status    = BTA_HH_ERR_DB_FULL;
+                    cback_data.dev_info.handle    = BTA_HH_INVALID_HANDLE;
+                }
+                else
+                {
+                    cback_data.dev_info.status    = BTA_HH_ERR_HDL;
+                    cback_data.dev_info.handle    = (UINT8)p_data->api_maintdev.hdr.layer_specific;
+                }
+                break;
+            case BTA_HH_API_WRITE_DEV_EVT:
+                cback_event = (p_data->api_sndcmd.t_type - BTA_HH_FST_BTE_TRANS_EVT) +
+                        BTA_HH_FST_TRANS_CB_EVT;
+                if (p_data->api_sndcmd.t_type == HID_TRANS_SET_PROTOCOL ||
+                    p_data->api_sndcmd.t_type == HID_TRANS_SET_REPORT ||
+                    p_data->api_sndcmd.t_type == HID_TRANS_SET_IDLE)
+                {
+                    cback_data.dev_status.status = BTA_HH_ERR_HDL;
+                    cback_data.dev_status.handle = (UINT8)p_data->api_sndcmd.hdr.layer_specific;
+                }
+                else if (p_data->api_sndcmd.t_type != HID_TRANS_DATA &&
+                    p_data->api_sndcmd.t_type != HID_TRANS_CONTROL)
+                {
+                    cback_data.hs_data.handle = (UINT8)p_data->api_sndcmd.hdr.layer_specific;
+                    cback_data.hs_data.status = BTA_HH_ERR_HDL;
+                    /* hs_data.rsp_data will be all zero, which is not valid value */
+                }
+                break;
+
+            case BTA_HH_API_CLOSE_EVT:
+                cback_event = BTA_HH_CLOSE_EVT;
+
+                cback_data.dev_status.status = BTA_HH_ERR_HDL;
+                cback_data.dev_status.handle = (UINT8)p_data->api_sndcmd.hdr.layer_specific;
+                break;
+
+            default:
+                /* invalid handle, call bad API event */
+                APPL_TRACE_ERROR1("wrong device handle: [%d]", p_data->hdr.layer_specific);
+                break;
+            }
+           if (cback_event)
+               (* bta_hh_cb.p_cback)(cback_event, &cback_data);
+        }
+    }
+    /* corresponding CB is found, go to state machine */
+    else
+    {
+#if BTA_HH_DEBUG == TRUE
+        in_state = p_cb->state;
+        APPL_TRACE_EVENT3("bta_hh_sm_execute: State 0x%02x [%s], Event [%s]",
+                          in_state, bta_hh_state_code(in_state),
+                          bta_hh_evt_code(debug_event));
+#endif
+
+        state_table = bta_hh_st_tbl[p_cb->state - 1];
+
+        event &= 0xff;
+
+        p_cb->state = state_table[event][BTA_HH_NEXT_STATE] ;
+
+        if ((action = state_table[event][BTA_HH_ACTION]) != BTA_HH_IGNORE)
+        {
+            (*bta_hh_action[action])(p_cb, p_data);
+        }
+
+#if BTA_HH_DEBUG == TRUE
+        if (in_state != p_cb->state)
+        {
+            APPL_TRACE_DEBUG3("HH State Change: [%s] -> [%s] after Event [%s]",
+                          bta_hh_state_code(in_state),
+                          bta_hh_state_code(p_cb->state),
+                          bta_hh_evt_code(debug_event));
+        }
+#endif
+    }
+
+    return;
+}
+/*******************************************************************************
+**
+** Function         bta_hh_hdl_event
+**
+** Description      HID host main event handling function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_hh_hdl_event(BT_HDR *p_msg)
+{
+    UINT8           index = BTA_HH_MAX_KNOWN;
+    tBTA_HH_DEV_CB *p_cb = NULL;
+
+    switch (p_msg->event)
+    {
+        case BTA_HH_API_ENABLE_EVT:
+            bta_hh_api_enable((tBTA_HH_DATA *) p_msg);
+            break;
+
+        case BTA_HH_API_DISABLE_EVT:
+            bta_hh_api_disable();
+            break;
+
+        case BTA_HH_DISC_CMPL_EVT:          /* disable complete */
+            bta_hh_disc_cmpl();
+            break;
+
+        default:
+            /* all events processed in state machine need to find corresponding
+                CB before proceed */
+            if (p_msg->event == BTA_HH_API_OPEN_EVT)
+            {
+                index = bta_hh_find_cb(((tBTA_HH_API_CONN *)p_msg)->bd_addr);
+            }
+            else if (p_msg->event == BTA_HH_API_MAINT_DEV_EVT)
+            {
+                /* if add device */
+                if (((tBTA_HH_MAINT_DEV *)p_msg)->sub_event == BTA_HH_ADD_DEV_EVT)
+                {
+                    index = bta_hh_find_cb(((tBTA_HH_MAINT_DEV *)p_msg)->bda);
+                }
+                else /* else remove device by handle */
+                {
+                    index = bta_hh_cb.cb_index[p_msg->layer_specific];
+// btla-specific ++
+                    /* If BT disable is done while the HID device is connected and Link_Key uses unauthenticated combination
+                      * then we can get into a situation where remove_bonding is called with the index set to 0 (without getting
+                      * cleaned up). Only when VIRTUAL_UNPLUG is called do we cleanup the index and make it MAX_KNOWN.
+                      * So if REMOVE_DEVICE is called and in_use is FALSE then we should treat this as a NULL p_cb. Hence we
+                      * force the index to be MAX_KNOWN
+                      */
+                    if (bta_hh_cb.kdev[index].in_use == FALSE) {
+                           index = BTA_HH_MAX_KNOWN;
+                    }
+// btla-specific --
+                }
+            }
+            else if (p_msg->layer_specific < BTA_HH_MAX_KNOWN )
+                index = bta_hh_cb.cb_index[p_msg->layer_specific];
+
+            if (index != BTA_HH_MAX_KNOWN)
+                p_cb = &bta_hh_cb.kdev[index];
+
+#if BTA_HH_DEBUG
+            APPL_TRACE_DEBUG2("bta_hh_hdl_event:: handle = %d dev_cb[%d] ", p_msg->layer_specific, index);
+#endif
+            bta_hh_sm_execute(p_cb, p_msg->event, (tBTA_HH_DATA *) p_msg);
+    }
+    return (TRUE);
+}
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if BTA_HH_DEBUG
+/*******************************************************************************
+**
+** Function         bta_hh_evt_code
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+static char *bta_hh_evt_code(tBTA_HH_INT_EVT evt_code)
+{
+  switch(evt_code)
+    {
+    case BTA_HH_API_DISABLE_EVT:
+        return "BTA_HH_API_DISABLE_EVT";
+    case BTA_HH_API_ENABLE_EVT:
+        return "BTA_HH_API_ENABLE_EVT";
+    case BTA_HH_API_OPEN_EVT:
+        return "BTA_HH_API_OPEN_EVT";
+    case BTA_HH_API_CLOSE_EVT:
+        return "BTA_HH_API_CLOSE_EVT";
+    case BTA_HH_INT_OPEN_EVT:
+        return "BTA_HH_INT_OPEN_EVT";
+    case BTA_HH_INT_CLOSE_EVT:
+        return "BTA_HH_INT_CLOSE_EVT";
+    case BTA_HH_INT_HANDSK_EVT:
+        return "BTA_HH_INT_HANDSK_EVT";
+    case BTA_HH_INT_DATA_EVT:
+        return "BTA_HH_INT_DATA_EVT";
+    case BTA_HH_INT_CTRL_DATA:
+        return "BTA_HH_INT_CTRL_DATA";
+    case BTA_HH_API_WRITE_DEV_EVT:
+        return "BTA_HH_API_WRITE_DEV_EVT";
+    case BTA_HH_SDP_CMPL_EVT:
+        return "BTA_HH_SDP_CMPL_EVT";
+    case BTA_HH_DISC_CMPL_EVT:
+        return "BTA_HH_DISC_CMPL_EVT";
+    case BTA_HH_API_MAINT_DEV_EVT:
+        return "BTA_HH_API_MAINT_DEV_EVT";
+    case BTA_HH_API_GET_DSCP_EVT:
+        return "BTA_HH_API_GET_DSCP_EVT";
+    case BTA_HH_OPEN_CMPL_EVT:
+        return "BTA_HH_OPEN_CMPL_EVT";
+    default:
+        return "unknown HID Host event code";
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_state_code
+**
+** Description      get string representation of HID host state code.
+**
+** Returns          void
+**
+*******************************************************************************/
+static char *bta_hh_state_code(tBTA_HH_STATE state_code)
+{
+    switch (state_code)
+    {
+    case BTA_HH_NULL_ST:
+        return"BTA_HH_NULL_ST";
+    case BTA_HH_IDLE_ST:
+        return "BTA_HH_IDLE_ST";
+    case BTA_HH_W4_CONN_ST:
+        return "BTA_HH_W4_CONN_ST";
+    case BTA_HH_CONN_ST:
+        return "BTA_HH_CONN_ST";
+    default:
+        return "unknown HID Host state";
+    }
+}
+
+#endif  /* Debug Functions */
+
+#endif /* BTA_HH_INCLUDED */
diff --git a/bta/hh/bta_hh_utils.c b/bta/hh/bta_hh_utils.c
new file mode 100644
index 0000000..4349282
--- /dev/null
+++ b/bta/hh/bta_hh_utils.c
@@ -0,0 +1,417 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE)
+
+
+#include "bta_hh_int.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+#define BTA_HH_KB_CTRL_MASK         0x11
+#define BTA_HH_KB_SHIFT_MASK        0x22
+#define BTA_HH_KB_ALT_MASK          0x44
+#define BTA_HH_KB_GUI_MASK          0x88
+
+#define BTA_HH_KB_CAPS_LOCK      0x39           /* caps lock */
+#define BTA_HH_KB_NUM_LOCK       0x53           /* num lock */
+
+
+#define BTA_HH_MAX_RPT_CHARS    8
+
+static const UINT8 bta_hh_mod_key_mask[BTA_HH_MOD_MAX_KEY] =
+{
+    BTA_HH_KB_CTRL_MASK,
+    BTA_HH_KB_SHIFT_MASK,
+    BTA_HH_KB_ALT_MASK,
+    BTA_HH_KB_GUI_MASK
+};
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_find_cb
+**
+** Description      Find best available control block according to BD address.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8  bta_hh_find_cb(BD_ADDR bda)
+{
+    UINT8 xx;
+
+    /* See how many active devices there are. */
+    for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx++)
+    {
+        /* check if any active/known devices is a match */
+        if ((!bdcmp (bda, bta_hh_cb.kdev[xx].addr) &&
+              bdcmp(bda, bd_addr_null) != 0) )
+        {
+#if BTA_HH_DEBUG
+            APPL_TRACE_DEBUG2("found kdev_cb[%d] hid_handle = %d ", xx,
+                                bta_hh_cb.kdev[xx].hid_handle)
+#endif
+            return xx;
+        }
+#if BTA_HH_DEBUG
+        else
+            APPL_TRACE_DEBUG4("in_use ? [%d] kdev[%d].hid_handle = %d state = [%d]",
+                            bta_hh_cb.kdev[xx].in_use, xx,
+                            bta_hh_cb.kdev[xx].hid_handle,
+                            bta_hh_cb.kdev[xx].state);
+#endif
+    }
+
+    /* if no active device match, find a spot for it */
+    for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx++)
+    {
+        if (!bta_hh_cb.kdev[xx].in_use)
+        {
+            bdcpy(bta_hh_cb.kdev[xx].addr, bda);
+            break;
+        }
+    }
+    /* If device list full, report BTA_HH_MAX_KNOWN */
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG2("bta_hh_find_cb:: index = %d while max = %d",
+                        xx, BTA_HH_MAX_KNOWN);
+#endif
+
+    return xx;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_clean_up_kdev
+**
+** Description      Clean up device control block when device is removed from
+**                  manitainace list, and update control block index map.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_clean_up_kdev(tBTA_HH_DEV_CB *p_cb)
+{
+    UINT8 index;
+
+    if (p_cb->hid_handle != BTA_HH_INVALID_HANDLE )
+        bta_hh_cb.cb_index[p_cb->hid_handle] = BTA_HH_MAX_KNOWN;
+
+    /* reset device control block */
+    index = p_cb->index;                        /* Preserve index for this control block */
+
+    /* Free buffer for report descriptor info */
+    utl_freebuf((void **)&p_cb->dscp_info.descriptor.dsc_list);
+
+    memset(p_cb, 0, sizeof (tBTA_HH_DEV_CB));   /* Reset control block */
+
+    p_cb->index = index;                        /* Restore index for this control block */
+    p_cb->state      = BTA_HH_IDLE_ST;
+    p_cb->hid_handle = BTA_HH_INVALID_HANDLE;
+
+}
+/*******************************************************************************
+**
+** Function         bta_hh_update_di_info
+**
+** Description      Maintain a known device list for BTA HH.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_update_di_info(tBTA_HH_DEV_CB *p_cb, UINT16 vendor_id, UINT16 product_id,
+                           UINT16 version)
+{
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG3("vendor_id = 0x%2x product_id = 0x%2x version = 0x%2x",
+                        vendor_id, product_id, version);
+#endif
+    p_cb->dscp_info.vendor_id     =   vendor_id;
+    p_cb->dscp_info.product_id    =   product_id;
+    p_cb->dscp_info.version       =   version;
+}
+/*******************************************************************************
+**
+** Function         bta_hh_add_device_to_list
+**
+** Description      Maintain a known device list for BTA HH.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_add_device_to_list(tBTA_HH_DEV_CB *p_cb, UINT8 handle,
+                               UINT16 attr_mask,
+                               tHID_DEV_DSCP_INFO *p_dscp_info,
+                               UINT8 sub_class,
+                               UINT16 ssr_max_latency,
+                               UINT16 ssr_min_tout,
+                               UINT8 app_id)
+{
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG1("subclass = 0x%2x", sub_class);
+#endif
+
+    p_cb->hid_handle = handle;
+    p_cb->in_use = TRUE;
+    p_cb->attr_mask = attr_mask;
+
+    p_cb->sub_class = sub_class;
+    p_cb->app_id    = app_id;
+
+    if (ssr_max_latency == HID_SSR_PARAM_INVALID)
+        p_cb->dscp_info.ssr_max_latency = BTA_HH_SSR_MAX_LATENCY_DEF;
+    else
+        p_cb->dscp_info.ssr_max_latency = ssr_max_latency;
+
+    if (ssr_min_tout == HID_SSR_PARAM_INVALID)
+        p_cb->dscp_info.ssr_min_tout = BTA_HH_SSR_MIN_TOUT_DEF;
+    else
+        p_cb->dscp_info.ssr_min_tout = ssr_min_tout;
+
+    /* store report descriptor info */
+    if ( p_dscp_info)
+    {
+        utl_freebuf((void **)&p_cb->dscp_info.descriptor.dsc_list);
+
+        if (p_dscp_info->dl_len &&
+        (p_cb->dscp_info.descriptor.dsc_list =
+            (UINT8 *)GKI_getbuf(p_dscp_info->dl_len)) != NULL)
+        {
+            p_cb->dscp_info.descriptor.dl_len = p_dscp_info->dl_len;
+            memcpy(p_cb->dscp_info.descriptor.dsc_list, p_dscp_info->dsc_list,
+                    p_dscp_info->dl_len);
+        }
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_tod_spt
+**
+** Description      Check to see if this type of device is supported
+**
+** Returns
+**
+*******************************************************************************/
+BOOLEAN bta_hh_tod_spt(tBTA_HH_DEV_CB *p_cb,UINT8 sub_class)
+{
+    UINT8    xx;
+    UINT8    cod = (sub_class >> 2); /* lower two bits are reserved */
+
+    for (xx = 0 ; xx < p_bta_hh_cfg->max_devt_spt; xx ++)
+    {
+        if (cod == (UINT8) p_bta_hh_cfg->p_devt_list[xx].tod)
+        {
+            p_cb->app_id = p_bta_hh_cfg->p_devt_list[xx].app_id;
+#if BTA_HH_DEBUG
+            APPL_TRACE_EVENT1("bta_hh_tod_spt sub_class:0x%x supported", sub_class);
+#endif
+            return TRUE;
+        }
+    }
+#if BTA_HH_DEBUG
+            APPL_TRACE_EVENT1("bta_hh_tod_spt sub_class:0x%x NOT supported", sub_class);
+#endif
+    return FALSE;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_parse_keybd_rpt
+**
+** Description      This utility function parse a boot mode keyboard report.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_parse_keybd_rpt(tBTA_HH_BOOT_RPT *p_kb_data, UINT8 *p_report,
+                            UINT16 report_len)
+{
+    tBTA_HH_KB_CB       *p_kb = &bta_hh_cb.kb_cb;
+    tBTA_HH_KEYBD_RPT   *p_data = &p_kb_data->data_rpt.keybd_rpt;
+
+    UINT8        this_char, ctl_shift;
+    UINT16       xx, yy, key_idx = 0;
+    UINT8        this_report[BTA_HH_MAX_RPT_CHARS];
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG2("bta_hh_parse_keybd_rpt:  (report=%p, report_len=%d) called",
+            p_report, report_len);
+#endif
+
+    if (report_len < 2)
+        return;
+
+    ctl_shift = *p_report++;
+    report_len--;
+
+    if (report_len > BTA_HH_MAX_RPT_CHARS)
+        report_len = BTA_HH_MAX_RPT_CHARS;
+
+    memset (this_report, 0, BTA_HH_MAX_RPT_CHARS);
+    memset (p_data, 0, sizeof(tBTA_HH_KEYBD_RPT));
+    memcpy (this_report, p_report, report_len);
+
+    /* Take care of shift, control, GUI and alt, modifier keys  */
+    for (xx = 0; xx < BTA_HH_MOD_MAX_KEY; xx ++ )
+    {
+        if (ctl_shift & bta_hh_mod_key_mask[xx])
+        {
+            APPL_TRACE_DEBUG1("Mod Key[%02x] pressed", bta_hh_mod_key_mask[xx] );
+            p_kb->mod_key[xx] = TRUE;
+        }
+        else if (p_kb->mod_key[xx])
+        {
+            p_kb->mod_key[xx] = FALSE;
+        }
+        /* control key flag is set */
+        p_data->mod_key[xx]       = p_kb->mod_key[xx];
+    }
+
+    /***************************************************************************/
+    /*  First step is to remove all characters we saw in the last report       */
+    /***************************************************************************/
+    for (xx = 0; xx < report_len; xx++)
+    {
+        for (yy = 0; yy < BTA_HH_MAX_RPT_CHARS; yy++)
+        {
+            if (this_report[xx] == p_kb->last_report[yy])
+            {
+                this_report[xx] = 0;
+            }
+        }
+    }
+    /***************************************************************************/
+    /*  Now, process all the characters in the report, up to 6 keycodes        */
+    /***************************************************************************/
+    for (xx = 0; xx < report_len; xx++)
+    {
+#if BTA_HH_DEBUG
+        APPL_TRACE_DEBUG1("this_char = %02x", this_report[xx]);
+#endif
+        if ((this_char = this_report[xx]) == 0)
+            continue;
+        /* take the key code as the report data */
+        if (this_report[xx] == BTA_HH_KB_CAPS_LOCK)
+            p_kb->caps_lock = p_kb->caps_lock ? FALSE : TRUE;
+        else if (this_report[xx] == BTA_HH_KB_NUM_LOCK)
+            p_kb->num_lock = p_kb->num_lock ? FALSE : TRUE;
+        else
+            p_data->this_char[key_idx ++] = this_char;
+
+#if BTA_HH_DEBUG
+        APPL_TRACE_DEBUG1("found keycode %02x ",  this_report[xx]);
+#endif
+        p_data->caps_lock   = p_kb->caps_lock;
+        p_kb->num_lock      = p_kb->num_lock;
+    }
+
+    memset (p_kb->last_report, 0, BTA_HH_MAX_RPT_CHARS);
+    memcpy (p_kb->last_report, p_report, report_len);
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hh_parse_mice_rpt
+**
+** Description      This utility function parse a boot mode mouse report.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hh_parse_mice_rpt(tBTA_HH_BOOT_RPT *p_mice_data, UINT8 *p_report,
+                           UINT16 report_len)
+{
+    tBTA_HH_MICE_RPT   *p_data = &p_mice_data->data_rpt.mice_rpt;
+#if BTA_HH_DEBUG
+    UINT8       xx;
+
+    APPL_TRACE_DEBUG2("bta_hh_parse_mice_rpt:  bta_keybd_rpt_rcvd(report=%p, \
+                report_len=%d) called", p_report, report_len);
+#endif
+
+    if (report_len < 3)
+        return;
+
+    if (report_len > BTA_HH_MAX_RPT_CHARS)
+        report_len = BTA_HH_MAX_RPT_CHARS;
+
+#if BTA_HH_DEBUG
+    for (xx = 0; xx < report_len; xx++)
+    {
+        APPL_TRACE_DEBUG1("this_char = %02x", p_report[xx]);
+    }
+#endif
+
+    /* only first bytes lower 3 bits valid */
+    p_data->mouse_button     = (p_report[0] & 0x07);
+
+    /* x displacement */
+    p_data->delta_x     = p_report[1];
+
+    /* y displacement */
+    p_data->delta_y     = p_report[2];
+
+#if BTA_HH_DEBUG
+    APPL_TRACE_DEBUG1("mice button: 0x%2x", p_data->mouse_button);
+    APPL_TRACE_DEBUG2("mice move: x = %d y = %d", p_data->delta_x,
+                        p_data->delta_y );
+#endif
+
+    return;
+
+}
+
+#if BTA_HH_DEBUG
+/*******************************************************************************
+**
+** Function         bta_hh_trace_dev_db
+**
+** Description      Check to see if this type of device is supported
+**
+** Returns
+**
+*******************************************************************************/
+void bta_hh_trace_dev_db(void)
+{
+    UINT8    xx;
+
+    APPL_TRACE_DEBUG0("bta_hh_trace_dev_db:: Device DB list********************");
+
+    for (xx = 0; xx < BTA_HH_MAX_KNOWN; xx++)
+    {
+        APPL_TRACE_DEBUG3("kdev[%d] in_use[%d]  handle[%d] ",xx,
+            bta_hh_cb.kdev[xx].in_use, bta_hh_cb.kdev[xx].hid_handle);
+
+        APPL_TRACE_DEBUG4("\t\t\t attr_mask[%04x] state [%d] sub_class[%02x] index = %d",
+            bta_hh_cb.kdev[xx].attr_mask, bta_hh_cb.kdev[xx].state,
+            bta_hh_cb.kdev[xx].sub_class, bta_hh_cb.kdev[xx].index);
+    }
+    APPL_TRACE_DEBUG0("*********************************************************");
+}
+#endif
+#endif /* HL_INCLUDED */
diff --git a/bta/hl/bta_hl_act.c b/bta/hl/bta_hl_act.c
new file mode 100644
index 0000000..0f46e5e
--- /dev/null
+++ b/bta/hl/bta_hl_act.c
@@ -0,0 +1,2807 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HeaLth device profile (HL) action functions for
+ *  the state machine.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE)
+
+#include "gki.h"
+#include "sdp_api.h"
+#include "bta_sys.h"
+#include "port_api.h"
+#include "sdp_api.h"
+#include "bta_hl_api.h"
+#include "bta_hl_int.h"
+#include "utl.h"
+#include "bd.h"
+#include "mca_defs.h"
+#include "mca_api.h"
+
+/*****************************************************************************
+**  Local Function prototypes
+*****************************************************************************/
+#if (BTA_HL_DEBUG == TRUE && BT_TRACE_VERBOSE == TRUE)
+static char *bta_hl_mcap_evt_code(UINT8 evt_code);
+static char *bta_hl_dch_oper_code(tBTA_HL_DCH_OPER oper_code);
+static char *bta_hl_cback_evt_code(UINT8 evt_code);
+#endif
+static void bta_hl_sdp_cback(UINT8 sdp_op, UINT8 app_idx, UINT8 mcl_idx,
+                             UINT8 mdl_idx, UINT16 status);
+static void bta_hl_sdp_cback0(UINT16 status);
+static void bta_hl_sdp_cback1(UINT16 status);
+static void bta_hl_sdp_cback2(UINT16 status);
+static void bta_hl_sdp_cback3(UINT16 status);
+static void bta_hl_sdp_cback4(UINT16 status);
+static void bta_hl_sdp_cback5(UINT16 status);
+static void bta_hl_sdp_cback6(UINT16 status);
+
+
+static tSDP_DISC_CMPL_CB * const bta_hl_sdp_cback_arr[] = {
+    bta_hl_sdp_cback0,
+    bta_hl_sdp_cback1,
+    bta_hl_sdp_cback2,
+    bta_hl_sdp_cback3,
+    bta_hl_sdp_cback4,
+    bta_hl_sdp_cback5,
+    bta_hl_sdp_cback6
+};
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_cong_change
+**
+** Description      Action routine for processing congestion change notification
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_cong_change(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_CONG_CHG       *p_cong_chg = &p_data->mca_evt.mca_data.cong_chg;
+    tBTA_HL             evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG2("bta_hl_dch_mca_cong_change mdl_id=%d cong=%d",
+                      p_cong_chg->mdl_id,
+                      p_cong_chg->cong);
+#endif
+    evt_data.dch_cong_ind.cong          =
+    p_dcb->cong                         = p_cong_chg->cong;
+    evt_data.dch_cong_ind.mdl_handle    = p_dcb->mdl_handle;
+    evt_data.dch_cong_ind.mcl_handle    = p_mcb->mcl_handle;
+    evt_data.dch_cong_ind.app_handle    = p_acb->app_handle;
+
+    p_acb->p_cback(BTA_HL_CONG_CHG_IND_EVT ,(tBTA_HL *) &evt_data );
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_echo_test
+**
+** Description      Action routine for processing echo test request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_echo_test(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                          tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_echo_test");
+#endif
+
+    p_dcb->echo_oper = BTA_HL_ECHO_OP_CI_GET_ECHO_DATA;
+    p_dcb->cout_oper |= BTA_HL_CO_GET_ECHO_DATA_MASK;
+
+    bta_hl_co_get_echo_data(p_acb->app_id, p_mcb->mcl_handle,
+                            p_dcb->p_echo_tx_pkt->len,
+                            BTA_HL_GET_BUF_PTR(p_dcb->p_echo_tx_pkt),
+                            BTA_HL_CI_GET_ECHO_DATA_EVT);
+
+}
+/*******************************************************************************
+**
+** Function         bta_hl_dch_sdp_init
+**
+** Description      Action routine for processing DCH SDP initiation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_sdp_init(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                         tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_sdp_init");
+#endif
+    if ( p_mcb->sdp_oper == BTA_HL_SDP_OP_NONE)
+    {
+        p_mcb->sdp_mdl_idx = mdl_idx;
+        if (p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_OPEN )
+        {
+            p_mcb->sdp_oper = BTA_HL_SDP_OP_DCH_OPEN_INIT;
+
+        }
+        else
+        {
+            p_mcb->sdp_oper = BTA_HL_SDP_OP_DCH_RECONNECT_INIT;
+        }
+
+        if (bta_hl_init_sdp(p_mcb->sdp_oper, app_idx, mcl_idx, mdl_idx) != BTA_HL_STATUS_OK)
+        {
+            APPL_TRACE_ERROR0("SDP INIT failed");
+            p_mcb->sdp_oper = BTA_HL_SDP_OP_NONE;
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_SDP_FAIL_EVT, p_data);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("SDP in use");
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_SDP_FAIL_EVT, p_data);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_close_echo_test
+**
+** Description      Action routine for processing the closing of echo test
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_close_echo_test(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB          *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_close_echo_test");
+#endif
+
+    switch (p_dcb->echo_oper)
+    {
+        case BTA_HL_ECHO_OP_DCH_CLOSE_CFM:
+        case BTA_HL_ECHO_OP_OPEN_IND:
+        case BTA_HL_ECHO_OP_ECHO_PKT:
+            p_dcb->dch_oper = BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST;
+            break;
+        case BTA_HL_ECHO_OP_MDL_CREATE_CFM:
+        case BTA_HL_ECHO_OP_DCH_OPEN_CFM:
+        case BTA_HL_ECHO_OP_LOOP_BACK:
+        default:
+            break;
+    }
+
+    if (MCA_CloseReq((tMCA_DL) p_dcb->mdl_handle)!= MCA_SUCCESS)
+    {
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_rcv_data
+**
+** Description      Action routine for processing the received data
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_rcv_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                             tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_rcv_data");
+#endif
+
+    if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID)
+    {
+        switch ( p_dcb->echo_oper)
+        {
+            case  BTA_HL_ECHO_OP_ECHO_PKT:
+
+                if (MCA_WriteReq((tMCA_DL) p_dcb->mdl_handle, p_data->mca_rcv_data_evt.p_pkt) != MCA_SUCCESS)
+                {
+                    utl_freebuf((void **) &p_data->mca_rcv_data_evt.p_pkt);
+                    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_ECHO_TEST_EVT, p_data);
+                }
+                break;
+            case BTA_HL_ECHO_OP_LOOP_BACK:
+
+                p_dcb->p_echo_rx_pkt = p_data->mca_rcv_data_evt.p_pkt;
+                p_dcb->echo_oper = BTA_HL_ECHO_OP_CI_PUT_ECHO_DATA;
+                p_dcb->cout_oper |= BTA_HL_CO_PUT_ECHO_DATA_MASK;
+                p_dcb->ci_put_echo_data_status = BTA_HL_STATUS_FAIL;
+
+                bta_hl_co_put_echo_data(p_acb->app_id, p_mcb->mcl_handle,
+                                        p_dcb->p_echo_rx_pkt->len,
+                                        BTA_HL_GET_BUF_PTR(p_dcb->p_echo_rx_pkt),
+                                        BTA_HL_CI_PUT_ECHO_DATA_EVT);
+                break;
+            default:
+                APPL_TRACE_ERROR1("Unknonw echo_oper=%d",p_dcb->echo_oper);
+                break;
+        }
+
+    }
+    else
+    {
+        p_dcb->cout_oper |= BTA_HL_CO_PUT_RX_DATA_MASK;
+        p_dcb->p_rx_pkt = p_data->mca_rcv_data_evt.p_pkt;
+
+        bta_hl_co_put_rx_data(p_acb->app_id, p_dcb->mdl_handle,
+                              p_dcb->p_rx_pkt->len,
+                              BTA_HL_GET_BUF_PTR(p_dcb->p_rx_pkt),
+                              BTA_HL_CI_PUT_RX_DATA_EVT);
+
+
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_ci_put_echo_data
+**
+** Description      Action routine for processing the call-in of the
+**                  put echo data event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_ci_put_echo_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                 tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_ci_put_echo_data");
+#endif
+
+    p_dcb->cout_oper &= ~BTA_HL_CO_PUT_ECHO_DATA_MASK;
+    utl_freebuf((void **) &p_dcb->p_echo_rx_pkt);
+    p_dcb->ci_put_echo_data_status = p_data->ci_get_put_echo_data.status;
+
+    p_dcb->echo_oper = BTA_HL_ECHO_OP_DCH_CLOSE_CFM;
+    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_ECHO_TEST_EVT, p_data);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_ci_get_echo_data
+**
+** Description      Action routine for processing the call-in of the
+**                  get echo data event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_ci_get_echo_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                 tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL_STATUS      status;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_ci_get_echo_data");
+#endif
+
+    p_dcb->cout_oper &= ~BTA_HL_CO_GET_ECHO_DATA_MASK;
+
+    if (!p_dcb->abort_oper)
+    {
+        status = p_data->ci_get_put_echo_data.status;
+        if (status == BTA_HL_STATUS_OK)
+        {
+            p_dcb->echo_oper = BTA_HL_ECHO_OP_MDL_CREATE_CFM;
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_OPEN_EVT, p_data);
+        }
+        else
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_ci_put_rx_data
+**
+** Description      Action routine for processing the call-in of the
+**                  put rx data event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_ci_put_rx_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                               tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL             evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_ci_put_rx_data");
+#endif
+
+    p_dcb->cout_oper &= ~BTA_HL_CO_PUT_RX_DATA_MASK;
+    utl_freebuf((void **) &p_dcb->p_rx_pkt);
+    bta_hl_build_rcv_data_ind(&evt_data,
+                              p_acb->app_handle,
+                              p_mcb->mcl_handle,
+                              p_dcb->mdl_handle);
+    p_acb->p_cback(BTA_HL_DCH_RCV_DATA_IND_EVT,(tBTA_HL *) &evt_data );
+    if (p_dcb->close_pending)
+    {
+        if (!p_dcb->cout_oper)
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_EVT, p_data);
+        }
+
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_ci_get_tx_data
+**
+** Description      Action routine for processing the call-in of the
+**                  get tx data event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_ci_get_tx_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                               tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_RESULT         result;
+    tBTA_HL_STATUS      status = BTA_HL_STATUS_OK;
+    BOOLEAN             free_buf = FALSE;
+    BOOLEAN             close_dch = FALSE;
+    tBTA_HL             evt_data;
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_ci_get_tx_data");
+#endif
+
+    p_dcb->cout_oper &= ~BTA_HL_CO_GET_TX_DATA_MASK;
+
+    if (p_dcb->close_pending)
+    {
+        status = BTA_HL_STATUS_FAIL;
+        free_buf = TRUE;
+
+        if (!p_dcb->cout_oper)
+        {
+            close_dch = TRUE;
+        }
+    }
+    else
+    {
+        if ((result = MCA_WriteReq((tMCA_DL) p_dcb->mdl_handle, p_dcb->p_tx_pkt)) != MCA_SUCCESS)
+        {
+            if (result == MCA_BUSY)
+            {
+                status = BTA_HL_STATUS_DCH_BUSY;
+            }
+            else
+            {
+                status = BTA_HL_STATUS_FAIL;
+            }
+            free_buf = TRUE;
+        }
+        else
+        {
+            p_dcb->p_tx_pkt = NULL;
+        }
+    }
+
+    if (free_buf)
+    {
+        utl_freebuf((void **) &p_dcb->p_tx_pkt);
+    }
+
+    bta_hl_build_send_data_cfm(&evt_data,
+                               p_acb->app_handle,
+                               p_mcb->mcl_handle,
+                               p_dcb->mdl_handle,
+                               status);
+    p_acb->p_cback(BTA_HL_DCH_SEND_DATA_CFM_EVT,(tBTA_HL *) &evt_data );
+
+    if (close_dch)
+    {
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_EVT, p_data);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_send_data
+**
+** Description      Action routine for processing api send data request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_send_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                          tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL             evt_data;
+    BOOLEAN             success = TRUE;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_send_data");
+#endif
+
+    if (!(p_dcb->cout_oper & BTA_HL_CO_GET_TX_DATA_MASK))
+    {
+        if ((p_dcb->p_tx_pkt = bta_hl_get_buf(p_data->api_send_data.pkt_size)) != NULL)
+        {
+            bta_hl_co_get_tx_data( p_acb->app_id,
+                                   p_dcb->mdl_handle,
+                                   p_data->api_send_data.pkt_size,
+                                   BTA_HL_GET_BUF_PTR(p_dcb->p_tx_pkt),
+                                   BTA_HL_CI_GET_TX_DATA_EVT);
+            p_dcb->cout_oper |= BTA_HL_CO_GET_TX_DATA_MASK;
+        }
+        else
+        {
+            success = FALSE;
+        }
+    }
+    else
+    {
+        success = FALSE;
+    }
+
+    if (!success)
+    {
+        bta_hl_build_send_data_cfm(&evt_data,
+                                   p_acb->app_handle,
+                                   p_mcb->mcl_handle,
+                                   p_dcb->mdl_handle,
+                                   BTA_HL_STATUS_FAIL);
+        p_acb->p_cback(BTA_HL_DCH_SEND_DATA_CFM_EVT,(tBTA_HL *) &evt_data );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_close_cmpl
+**
+** Description      Action routine for processing the close complete event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_close_cmpl(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                           tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL             evt_data;
+    tBTA_HL_EVT         event;
+    BOOLEAN             send_evt=TRUE;
+    tBTA_HL_STATUS      status;
+
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_dch_close_cmpl dch oper=%s", bta_hl_dch_oper_code(p_dcb->dch_oper));
+#else
+    APPL_TRACE_DEBUG1("bta_hl_dch_close_cmpl dch oper=%d", p_dcb->dch_oper);
+#endif
+#endif
+
+    switch (p_dcb->dch_oper)
+    {
+        case BTA_HL_DCH_OP_LOCAL_OPEN:
+        case BTA_HL_DCH_OP_LOCAL_RECONNECT:
+
+            if (p_dcb->abort_oper & BTA_HL_ABORT_LOCAL_MASK)
+            {
+                bta_hl_build_abort_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       BTA_HL_STATUS_OK);
+                event = BTA_HL_DCH_ABORT_CFM_EVT;
+            }
+            else if (p_dcb->abort_oper & BTA_HL_ABORT_REMOTE_MASK )
+            {
+                bta_hl_build_abort_ind(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle);
+                event = BTA_HL_DCH_ABORT_IND_EVT;
+            }
+            else
+            {
+                bta_hl_build_dch_open_cfm(&evt_data,
+                                          p_acb->app_handle,
+                                          p_mcb->mcl_handle,
+                                          BTA_HL_INVALID_MDL_HANDLE,
+                                          0,0,0,0,0, BTA_HL_STATUS_FAIL);
+                event = BTA_HL_DCH_OPEN_CFM_EVT;
+                if (p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_RECONNECT)
+                {
+                    event = BTA_HL_DCH_RECONNECT_CFM_EVT;
+                }
+            }
+            break;
+
+        case BTA_HL_DCH_OP_LOCAL_CLOSE:
+        case BTA_HL_DCH_OP_REMOTE_DELETE:
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT:
+        case BTA_HL_DCH_OP_NONE:
+
+            bta_hl_build_dch_close_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       p_dcb->mdl_handle,
+                                       BTA_HL_STATUS_OK);
+            event = BTA_HL_DCH_CLOSE_CFM_EVT;
+            break;
+
+        case BTA_HL_DCH_OP_REMOTE_CLOSE:
+            bta_hl_build_dch_close_ind(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       p_dcb->mdl_handle,
+                                       p_dcb->intentional_close);
+            event = BTA_HL_DCH_CLOSE_IND_EVT;
+            break;
+
+        case BTA_HL_DCH_OP_REMOTE_OPEN:
+
+            if (p_dcb->abort_oper & BTA_HL_ABORT_LOCAL_MASK)
+            {
+                bta_hl_build_abort_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       BTA_HL_STATUS_OK);
+                event = BTA_HL_DCH_ABORT_CFM_EVT;
+            }
+            else if (p_dcb->abort_oper & BTA_HL_ABORT_REMOTE_MASK )
+            {
+                bta_hl_build_abort_ind(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle);
+                event = BTA_HL_DCH_ABORT_IND_EVT;
+            }
+            else
+            {
+                bta_hl_build_dch_close_ind(&evt_data,
+                                           p_acb->app_handle,
+                                           p_mcb->mcl_handle,
+                                           p_dcb->mdl_handle,
+                                           p_dcb->intentional_close);
+                event = BTA_HL_DCH_CLOSE_IND_EVT;
+            }
+            break;
+
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST:
+            /* this is normal echo test close */
+        case BTA_HL_DCH_OP_REMOTE_CREATE:
+        case BTA_HL_DCH_OP_REMOTE_RECONNECT:
+            send_evt=FALSE;
+            break;
+
+        default:
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+            APPL_TRACE_ERROR1("DCH operation not found oper=%s", bta_hl_dch_oper_code(p_dcb->dch_oper));
+#else
+            APPL_TRACE_ERROR1("DCH operation not found oper=%d", p_dcb->dch_oper);
+#endif
+#endif
+            send_evt=FALSE;
+            break;
+    }
+
+    if ( p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID )
+    {
+        p_mcb->echo_test = FALSE;
+        send_evt=FALSE;
+
+        if ( p_dcb->dch_oper != BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST)
+        {
+            switch (p_dcb->echo_oper)
+            {
+                case BTA_HL_ECHO_OP_CI_GET_ECHO_DATA:
+                case BTA_HL_ECHO_OP_SDP_INIT:
+                case BTA_HL_ECHO_OP_MDL_CREATE_CFM:
+                case BTA_HL_ECHO_OP_DCH_OPEN_CFM:
+                case BTA_HL_ECHO_OP_LOOP_BACK:
+
+                    status = BTA_HL_STATUS_FAIL;
+                    send_evt = TRUE;
+                    break;
+                case BTA_HL_ECHO_OP_OPEN_IND:
+                case BTA_HL_ECHO_OP_ECHO_PKT:
+                    break;
+                default:
+                    APPL_TRACE_ERROR1("Invalid echo_oper=%d", p_dcb->echo_oper);
+                    break;
+            }
+        }
+        else
+        {
+            status = p_dcb->ci_put_echo_data_status;
+            send_evt = TRUE;
+        }
+
+        if (send_evt)
+        {
+            bta_hl_build_echo_test_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       status);
+            event = BTA_HL_DCH_ECHO_TEST_CFM_EVT;
+        }
+    }
+
+    bta_hl_clean_mdl_cb(app_idx, mcl_idx, mdl_idx);
+
+    if (send_evt)
+    {
+        if (p_acb->p_cback)
+        {
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+            APPL_TRACE_DEBUG1("Send Event: %s",  bta_hl_cback_evt_code(event));
+#else
+            APPL_TRACE_DEBUG1("Send Event: 0x%02x", event);
+#endif
+#endif
+            p_acb->p_cback(event,(tBTA_HL *) &evt_data );
+        }
+    }
+    /* check cch close is in progress or not */
+    bta_hl_check_cch_close(app_idx, mcl_idx, p_data, FALSE);
+}
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_close_ind
+**
+** Description      Action routine for processing the close indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_close_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                              tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_close_ind dch oper=%s", bta_hl_dch_oper_code(p_dcb->dch_oper));
+#else
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_close_ind dch oper=%d", p_dcb->dch_oper);
+#endif
+#endif
+
+    p_dcb->intentional_close = FALSE;
+    if (p_data->mca_evt.mca_data.close_ind.reason == L2CAP_DISC_OK)
+    {
+        p_dcb->intentional_close = TRUE;
+    }
+
+    if (!p_dcb->cout_oper)
+    {
+        if ((p_dcb->dch_oper != BTA_HL_DCH_OP_REMOTE_OPEN) &&
+            (p_dcb->dch_oper != BTA_HL_DCH_OP_REMOTE_RECONNECT))
+        {
+            p_dcb->dch_oper = BTA_HL_DCH_OP_REMOTE_CLOSE;
+        }
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+    else
+    {
+        p_dcb->close_pending = TRUE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_close_cfm
+**
+** Description      Action routine for processing the close confirmation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_close_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                              tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_close_cfm dch_oper=%s", bta_hl_dch_oper_code(p_dcb->dch_oper) );
+#else
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_close_cfm dch_oper=%d", p_dcb->dch_oper);
+#endif
+#endif
+
+    switch (p_dcb->dch_oper)
+    {
+        case BTA_HL_DCH_OP_LOCAL_CLOSE:
+        case BTA_HL_DCH_OP_LOCAL_OPEN:
+        case BTA_HL_DCH_OP_LOCAL_RECONNECT:
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST:
+        case BTA_HL_DCH_OP_REMOTE_DELETE:
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT:
+        case BTA_HL_DCH_OP_NONE:
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+            break;
+        default:
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+            APPL_TRACE_ERROR1("Invalid dch_oper=%s for close cfm", bta_hl_dch_oper_code(p_dcb->dch_oper) );
+#else
+            APPL_TRACE_ERROR1("Invalid dch_oper=%d for close cfm", p_dcb->dch_oper);
+#endif
+#endif
+            break;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_close
+**
+** Description      Action routine for processing the DCH close request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_close(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                          tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB          *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB          *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB          *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL_STATUS          status = BTA_HL_STATUS_OK;
+    tBTA_HL                 evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_close");
+#endif
+    if (!p_dcb->cout_oper)
+    {
+        p_dcb->close_pending = FALSE;
+        if (MCA_CloseReq((tMCA_DL)p_dcb->mdl_handle)== MCA_SUCCESS)
+        {
+            p_dcb->dch_oper = BTA_HL_DCH_OP_LOCAL_CLOSE;
+        }
+        else
+        {
+            status = BTA_HL_STATUS_FAIL;
+        }
+
+        if ((status != BTA_HL_STATUS_OK) &&
+            (p_mcb->cch_close_dch_oper != BTA_HL_CCH_CLOSE_OP_DCH_CLOSE))
+        {
+            bta_hl_build_dch_close_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       p_data->api_dch_close.mdl_handle,
+                                       status);
+            p_acb->p_cback(BTA_HL_DCH_CLOSE_CFM_EVT,(tBTA_HL *) &evt_data );
+        }
+    }
+    else
+    {
+        p_dcb->close_pending = TRUE;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_open_ind
+**
+** Description      Action routine for processing the open indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_open_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                             tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_DL_OPEN        *p_open_ind = &p_data->mca_evt.mca_data.open_ind;
+    tBTA_HL             evt_data;
+    tBTA_HL_EVT         event;
+    UINT8               old_dch_oper;
+    BOOLEAN             send_event = FALSE;
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_open_ind");
+#endif
+    if ((p_dcb->dch_oper == BTA_HL_DCH_OP_REMOTE_OPEN) ||
+        (p_dcb->dch_oper == BTA_HL_DCH_OP_REMOTE_RECONNECT)    )
+    {
+        p_dcb->mdl_handle = (tBTA_HL_MDL_HANDLE) p_open_ind->mdl;
+        p_dcb->mtu        = p_open_ind->mtu;
+
+        evt_data.dch_open_ind.mdl_handle = p_dcb->mdl_handle;
+        evt_data.dch_open_ind.mcl_handle = p_mcb->mcl_handle;
+        evt_data.dch_open_ind.app_handle = p_acb->app_handle;
+
+        evt_data.dch_open_ind.local_mdep_id = p_dcb->local_mdep_id;
+        evt_data.dch_open_ind.mdl_id = p_dcb->mdl_id;
+        evt_data.dch_open_ind.mtu = p_dcb->mtu;
+
+        if ( p_dcb->chnl_cfg.fcr_opt.mode == L2CAP_FCR_ERTM_MODE )
+        {
+            evt_data.dch_open_ind.dch_mode = BTA_HL_DCH_MODE_RELIABLE;
+            if (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx))
+            {
+                p_dcb->is_the_first_reliable = TRUE;
+            }
+        }
+        else
+        {
+            evt_data.dch_open_ind.dch_mode = BTA_HL_DCH_MODE_STREAMING;
+        }
+        evt_data.dch_open_ind.first_reliable = p_dcb->is_the_first_reliable ;
+
+        old_dch_oper = p_dcb->dch_oper;
+        p_dcb->dch_oper = BTA_HL_DCH_OP_NONE;
+
+
+    }
+
+    switch (old_dch_oper)
+    {
+        case BTA_HL_DCH_OP_REMOTE_OPEN:
+
+            p_dcb->dch_mode = evt_data.dch_open_ind.dch_mode;
+            if (p_dcb->local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+            {
+                bta_hl_save_mdl_cfg(app_idx, mcl_idx,mdl_idx);
+                event= BTA_HL_DCH_OPEN_IND_EVT;
+                send_event= TRUE;
+            }
+            else
+            {
+                p_dcb->echo_oper = BTA_HL_ECHO_OP_ECHO_PKT;
+            }
+
+            break;
+
+        case BTA_HL_DCH_OP_REMOTE_RECONNECT:
+
+            if (bta_hl_validate_chan_cfg(app_idx, mcl_idx, mdl_idx))
+            {
+                bta_hl_save_mdl_cfg(app_idx, mcl_idx,mdl_idx);
+                event= BTA_HL_DCH_RECONNECT_IND_EVT;
+                send_event= TRUE;
+            }
+            else
+            {
+                if (MCA_CloseReq((tMCA_DL) p_dcb->mdl_handle) == MCA_SUCCESS)
+                {
+                    p_dcb->dch_oper = BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT;
+                }
+                else
+                {
+                    APPL_TRACE_ERROR0("Unabel to close DCH for reconnect cfg mismatch");
+                }
+            }
+            break;
+        default:
+            break;
+    }
+
+    if (send_event)
+    {
+        p_acb->p_cback(event ,(tBTA_HL *) &evt_data );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_open_cfm
+**
+** Description      Action routine for processing the open confirmation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_open_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                             tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_DL_OPEN        *p_open_cfm = &p_data->mca_evt.mca_data.open_cfm;
+    tBTA_HL             evt_data;
+    tBTA_HL_EVT         event;
+    UINT8               old_dch_oper;
+    tBTA_HL_DCH_MODE    dch_mode;
+    BOOLEAN             send_event = FALSE;
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_open_cfm");
+#endif
+    if ((p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_OPEN) ||
+        (p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_RECONNECT))
+    {
+        p_dcb->mdl_handle = (tBTA_HL_MDL_HANDLE) p_open_cfm->mdl;
+        p_dcb->mtu        = p_open_cfm->mtu;
+
+        /*todo verify dch_mode, mtu and fcs for reconnect */
+        if ( p_dcb->chnl_cfg.fcr_opt.mode == L2CAP_FCR_ERTM_MODE )
+        {
+            dch_mode = BTA_HL_DCH_MODE_RELIABLE;
+        }
+        else
+        {
+            dch_mode = BTA_HL_DCH_MODE_STREAMING;
+        }
+
+        if (p_dcb->local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+        {
+            if (dch_mode == BTA_HL_DCH_MODE_RELIABLE )
+            {
+                if (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx))
+                {
+                    p_dcb->is_the_first_reliable = TRUE;
+                }
+            }
+        }
+
+        bta_hl_build_dch_open_cfm(&evt_data, p_acb->app_handle,
+                                  p_mcb->mcl_handle,
+                                  p_dcb->mdl_handle,
+                                  p_dcb->local_mdep_id,
+                                  p_dcb->mdl_id, dch_mode,
+                                  p_dcb->is_the_first_reliable,
+                                  p_dcb->mtu,
+                                  BTA_HL_STATUS_OK);
+
+        old_dch_oper = p_dcb->dch_oper;
+        p_dcb->dch_oper = BTA_HL_DCH_OP_NONE;
+    }
+
+    switch (old_dch_oper)
+    {
+        case BTA_HL_DCH_OP_LOCAL_OPEN:
+
+            p_dcb->dch_mode = dch_mode;
+            if (p_dcb->local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+            {
+                bta_hl_save_mdl_cfg(app_idx, mcl_idx, mdl_idx);
+                event= BTA_HL_DCH_OPEN_CFM_EVT;
+                send_event= TRUE;
+            }
+            else
+            {
+                p_dcb->echo_oper = BTA_HL_ECHO_OP_LOOP_BACK;
+                if (MCA_WriteReq((tMCA_DL) p_dcb->mdl_handle, p_dcb->p_echo_tx_pkt)!= MCA_SUCCESS)
+                {
+                    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_ECHO_TEST_EVT, p_data);
+                }
+                else
+                {
+                    p_dcb->p_echo_tx_pkt = NULL;
+                }
+            }
+            break;
+
+        case BTA_HL_DCH_OP_LOCAL_RECONNECT:
+
+            if (bta_hl_validate_chan_cfg(app_idx, mcl_idx, mdl_idx))
+            {
+                bta_hl_save_mdl_cfg(app_idx, mcl_idx,mdl_idx);
+                event= BTA_HL_DCH_RECONNECT_CFM_EVT;
+                send_event= TRUE;
+            }
+            else
+            {
+                if (MCA_CloseReq((tMCA_DL) p_dcb->mdl_handle) == MCA_SUCCESS)
+                {
+                    p_dcb->dch_oper = BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT;
+                }
+                else
+                {
+                    APPL_TRACE_ERROR0("Unabel to close DCH for reconnect cfg mismatch");
+                }
+            }
+            break;
+        default:
+            break;
+    }
+
+    if (send_event)
+        p_acb->p_cback(event ,(tBTA_HL *) &evt_data );
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_abort_ind
+**
+** Description      Action routine for processing the abort indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_abort_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                              tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_abort_ind");
+#endif
+
+    p_dcb->abort_oper |= BTA_HL_ABORT_REMOTE_MASK;
+    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_abort_cfm
+**
+** Description      Action routine for processing the abort confirmation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_abort_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                              tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL             evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_abort_cfm");
+#endif
+
+    if (p_dcb->abort_oper)
+    {
+        if (p_data->mca_evt.mca_data.abort_cfm.rsp_code != MCA_RSP_SUCCESS )
+        {
+            if (p_dcb->abort_oper & BTA_HL_ABORT_LOCAL_MASK)
+            {
+                bta_hl_build_abort_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       BTA_HL_STATUS_FAIL);
+                p_acb->p_cback(BTA_HL_DCH_ABORT_CFM_EVT ,(tBTA_HL *) &evt_data );
+            }
+        }
+        else
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("Not expecting Abort CFM ");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_abort
+**
+** Description      Action routine for processing the abort request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_abort(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                          tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB          *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB          *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB          *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_RESULT             mca_result;
+    tBTA_HL                 evt_data;
+
+    if (((p_mcb->sdp_oper == BTA_HL_SDP_OP_DCH_OPEN_INIT) ||
+         (p_mcb->sdp_oper == BTA_HL_SDP_OP_DCH_RECONNECT_INIT)) &&
+        (p_mcb->sdp_mdl_idx == mdl_idx) )
+    {
+        p_dcb->abort_oper |= BTA_HL_ABORT_PENDING_MASK;
+        return;
+    }
+    else if (p_dcb->echo_oper == BTA_HL_ECHO_OP_CI_GET_ECHO_DATA)
+    {
+        p_dcb->abort_oper |= BTA_HL_ABORT_PENDING_MASK;
+        return;
+    }
+
+    p_dcb->abort_oper &= ~BTA_HL_ABORT_PENDING_MASK;
+
+    if ((mca_result = MCA_Abort((tMCA_CL) p_mcb->mcl_handle))!= MCA_SUCCESS)
+    {
+        if (mca_result == MCA_NO_RESOURCES)
+        {
+            p_dcb->abort_oper |= BTA_HL_ABORT_PENDING_MASK;
+        }
+        else
+        {
+            if (p_dcb->abort_oper & BTA_HL_ABORT_LOCAL_MASK)
+            {
+                bta_hl_build_abort_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       BTA_HL_STATUS_FAIL);
+                p_acb->p_cback(BTA_HL_DCH_ABORT_CFM_EVT ,(tBTA_HL *) &evt_data );
+            }
+            bta_hl_check_cch_close(app_idx, mcl_idx, p_data, FALSE);
+        }
+
+
+    }
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_abort abort_oper=0x%x", p_dcb->abort_oper);
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_reconnect_ind
+**
+** Description      Action routine for processing the reconnect indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_reconnect_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL_MDL_CFG     *p_mdl_cfg;
+    tMCA_EVT_HDR        *p_reconnect_ind = &p_data->mca_evt.mca_data.reconnect_ind;
+    UINT8               mdl_cfg_idx, in_use_mdl_idx, mdep_cfg_idx;
+    UINT8               rsp_code = MCA_RSP_SUCCESS;
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_dch_mca_reconnect_ind mdl_id=%d", p_reconnect_ind->mdl_id);
+#endif
+
+    if (bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, p_reconnect_ind->mdl_id, &mdl_cfg_idx))
+    {
+        if (!bta_hl_find_mdl_idx(app_idx,mcl_idx,p_reconnect_ind->mdl_id, &in_use_mdl_idx) )
+        {
+            p_mdl_cfg =  BTA_HL_GET_MDL_CFG_PTR(app_idx, mdl_cfg_idx);
+
+            if (bta_hl_find_mdep_cfg_idx(app_idx, p_mdl_cfg->local_mdep_id, &mdep_cfg_idx))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->dch_oper             = BTA_HL_DCH_OP_REMOTE_RECONNECT;
+                p_dcb->sec_mask             = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+                p_dcb->peer_mdep_id             = 0xFF;
+                p_dcb->local_mdep_id        = p_mdl_cfg->local_mdep_id  ;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_cfg            = BTA_HL_DCH_CFG_UNKNOWN;
+                p_dcb->mdl_id               = p_reconnect_ind->mdl_id;
+                p_dcb->mdl_cfg_idx_included = TRUE;
+                p_dcb->mdl_cfg_idx          = mdl_cfg_idx;
+                p_dcb->dch_mode             = p_mdl_cfg->dch_mode;
+                bta_hl_find_rxtx_apdu_size(app_idx, mdep_cfg_idx,
+                                           &p_dcb->max_rx_apdu_size,
+                                           &p_dcb->max_tx_apdu_size);
+                bta_hl_set_dch_chan_cfg(app_idx, mcl_idx, mdl_idx, p_data);
+            }
+            else
+            {
+                rsp_code = MCA_RSP_BAD_MDL;
+            }
+        }
+        else
+        {
+            rsp_code = MCA_RSP_BAD_MDL;
+        }
+    }
+    else
+    {
+        rsp_code = MCA_RSP_BAD_MDL;
+    }
+
+    if (MCA_ReconnectMdlRsp((tMCA_CL) p_mcb->mcl_handle,
+                            p_dcb->local_mdep_id,
+                            p_dcb->mdl_id,
+                            rsp_code,
+                            &p_dcb->chnl_cfg)!= MCA_SUCCESS)
+    {
+        MCA_Abort((tMCA_CL) p_mcb->mcl_handle);
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_reconnect_cfm
+**
+** Description      Action routine for processing the reconenct confirmation
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_reconnect_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_RSP_EVT        *p_reconnect_cfm = &p_data->mca_evt.mca_data.reconnect_cfm;
+
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_reconnect_cfm");
+#endif
+    if (p_dcb->abort_oper & BTA_HL_ABORT_PENDING_MASK)
+    {
+        p_dcb->abort_oper &= ~BTA_HL_ABORT_PENDING_MASK;
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ABORT_EVT, p_data);
+        return;
+    }
+
+
+    if (p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_RECONNECT)
+    {
+        if (p_reconnect_cfm->rsp_code == MCA_RSP_SUCCESS)
+        {
+
+            bta_hl_set_dch_chan_cfg(app_idx, mcl_idx, mdl_idx, p_data);
+
+            if (MCA_DataChnlCfg((tMCA_CL) p_mcb->mcl_handle, &p_dcb->chnl_cfg)!= MCA_SUCCESS)
+            {
+                /* should be able to abort so no checking of the return code */
+                MCA_Abort((tMCA_CL) p_mcb->mcl_handle);
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+            }
+        }
+        else
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_reconnect
+**
+** Description      Action routine for processing the reconnect request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_reconnect(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                              tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_CHNL_CFG       *p_chnl_cfg=NULL;
+    UINT8               sdp_idx;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_reconnect");
+#endif
+    if (bta_hl_find_sdp_idx_using_ctrl_psm(&p_mcb->sdp, p_mcb->ctrl_psm, &sdp_idx))
+    {
+        p_mcb->data_psm = p_mcb->sdp.sdp_rec[sdp_idx].data_psm;
+        if ( MCA_ReconnectMdl((tMCA_CL) p_mcb->mcl_handle,
+                              p_dcb->local_mdep_id,
+                              p_mcb->data_psm,
+                              p_dcb->mdl_id,
+                              p_chnl_cfg ) != MCA_SUCCESS)
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_create_rsp
+**
+** Description      Action routine for processing BTA_HL_API_DCH_CREATE_RSP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_create_rsp(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                           tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB              *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB              *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL_API_DCH_CREATE_RSP  *p_create_rsp = &p_data->api_dch_create_rsp;
+    UINT8                       mca_rsp_code = MCA_RSP_SUCCESS;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_create_rsp");
+#endif
+    if (p_create_rsp->rsp_code == BTA_HL_DCH_CREATE_RSP_SUCCESS)
+    {
+        p_dcb->dch_oper             = BTA_HL_DCH_OP_REMOTE_OPEN;
+        p_dcb->local_cfg            = p_create_rsp->cfg_rsp;
+
+
+
+        bta_hl_set_dch_chan_cfg(app_idx, mcl_idx, mdl_idx, p_data);
+    }
+    else
+    {
+        mca_rsp_code = MCA_RSP_CFG_REJ;
+    }
+
+    if (MCA_CreateMdlRsp((tMCA_CL) p_mcb->mcl_handle,
+                         p_dcb->local_mdep_id,
+                         p_dcb->mdl_id,
+                         p_dcb->local_cfg,
+                         mca_rsp_code,
+                         &p_dcb->chnl_cfg)!= MCA_SUCCESS)
+    {
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_create_ind
+**
+** Description      Action routine for processing
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_create_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                               tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_CREATE_IND     *p_create_ind = &p_data->mca_evt.mca_data.create_ind;
+    UINT8               mdep_cfg_idx;
+    UINT8               cfg_rsp;
+    UINT8               rsp_code = MCA_RSP_SUCCESS;
+    BOOLEAN             send_create_ind_evt = FALSE;
+    tBTA_HL             evt_data;
+    tBTA_HL_ECHO_CFG    *p_echo_cfg;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_create_ind");
+#endif
+
+    if (bta_hl_find_mdep_cfg_idx(app_idx, p_create_ind->dep_id, &mdep_cfg_idx))
+    {
+        if (p_create_ind->dep_id == BTA_HL_ECHO_TEST_MDEP_ID )
+        {
+            if (bta_hl_find_echo_cfg_rsp(app_idx, mcl_idx, mdep_cfg_idx,p_create_ind->cfg, &cfg_rsp ))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->dch_oper             = BTA_HL_DCH_OP_REMOTE_OPEN;
+                p_dcb->local_mdep_id        = p_create_ind->dep_id  ;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_cfg            = cfg_rsp;
+                p_dcb->remote_cfg           = p_create_ind->cfg ;
+                p_dcb->mdl_id               = p_create_ind->mdl_id;
+                p_dcb->mdl_cfg_idx_included = FALSE;
+                p_echo_cfg                      = BTA_HL_GET_ECHO_CFG_PTR(app_idx);
+                p_dcb->max_rx_apdu_size         = p_echo_cfg->max_rx_apdu_size;
+                p_dcb->max_tx_apdu_size         = p_echo_cfg->max_tx_apdu_size;
+
+                bta_hl_set_dch_chan_cfg(app_idx, mcl_idx, mdl_idx, p_data);
+            }
+            else
+            {
+                rsp_code = MCA_RSP_CFG_REJ;
+            }
+        }
+        else
+
+        {
+            p_dcb->in_use               = TRUE;
+            p_dcb->dch_oper             = BTA_HL_DCH_OP_REMOTE_CREATE;
+            p_dcb->local_mdep_id        = p_create_ind->dep_id  ;
+            p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+            p_dcb->local_cfg            = BTA_HL_DCH_CFG_UNKNOWN;
+            p_dcb->remote_cfg           = p_create_ind->cfg;
+            p_dcb->mdl_id               = p_create_ind->mdl_id;
+            p_dcb->mdl_cfg_idx_included = FALSE;
+            bta_hl_find_rxtx_apdu_size(app_idx, mdep_cfg_idx,
+                                       &p_dcb->max_rx_apdu_size,
+                                       &p_dcb->max_tx_apdu_size);
+            send_create_ind_evt = TRUE;
+        }
+    }
+    else
+    {
+        rsp_code = MCA_RSP_BAD_MDEP;
+    }
+
+    if (send_create_ind_evt)
+    {
+        evt_data.dch_create_ind.mcl_handle =  p_mcb->mcl_handle;
+        evt_data.dch_create_ind.app_handle =  p_acb->app_handle;
+        evt_data.dch_create_ind.local_mdep_id = p_dcb->local_mdep_id;
+        evt_data.dch_create_ind.mdl_id = p_dcb->mdl_id;
+        evt_data.dch_create_ind.cfg = p_dcb->remote_cfg;
+        p_acb->p_cback(BTA_HL_DCH_CREATE_IND_EVT,(tBTA_HL *) &evt_data );
+    }
+    else
+    {
+        if (MCA_CreateMdlRsp((tMCA_CL) p_mcb->mcl_handle,
+                             p_dcb->local_mdep_id,
+                             p_dcb->mdl_id,
+                             p_dcb->local_cfg,
+                             rsp_code,
+                             &p_dcb->chnl_cfg)!= MCA_SUCCESS)
+        {
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+        else
+        {
+            if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID)
+            {
+                p_mcb->echo_test = TRUE;
+                p_dcb->echo_oper = BTA_HL_ECHO_OP_OPEN_IND;
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_create_cfm
+**
+** Description      Action routine for processing
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_create_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                               tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_CREATE_CFM     *p_create_cfm = &p_data->mca_evt.mca_data.create_cfm;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_create_cfm");
+#endif
+
+    if (p_dcb->abort_oper & BTA_HL_ABORT_PENDING_MASK)
+    {
+        p_dcb->abort_oper &= ~BTA_HL_ABORT_PENDING_MASK;
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ABORT_EVT, p_data);
+        return;
+    }
+
+    if (p_dcb->dch_oper == BTA_HL_DCH_OP_LOCAL_OPEN)
+    {
+        if (p_create_cfm->rsp_code == MCA_RSP_SUCCESS)
+        {
+            if (bta_hl_validate_cfg(app_idx, mcl_idx, mdl_idx, p_create_cfm->cfg ))
+            {
+                bta_hl_set_dch_chan_cfg(app_idx, mcl_idx, mdl_idx, p_data);
+
+                if (MCA_DataChnlCfg((tMCA_CL) p_mcb->mcl_handle, &p_dcb->chnl_cfg)!= MCA_SUCCESS)
+                {
+                    /* this should not happen */
+                    APPL_TRACE_ERROR0("Unable to create data channel");
+                    MCA_Abort((tMCA_CL) p_mcb->mcl_handle);
+                    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+                }
+                else
+                {
+                    if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID)
+                    {
+                        p_dcb->echo_oper = BTA_HL_ECHO_OP_DCH_OPEN_CFM;
+                    }
+                }
+            }
+            else
+            {
+                MCA_Abort((tMCA_CL) p_mcb->mcl_handle);
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+            }
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("MCA Create- failed");
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_mca_create
+**
+** Description      Action routine for processing the MDL create request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_mca_create(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                           tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tMCA_RESULT         result;
+    UINT8               sdp_idx;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_dch_mca_create");
+#endif
+
+    if (bta_hl_find_sdp_idx_using_ctrl_psm(&p_mcb->sdp, p_mcb->ctrl_psm, &sdp_idx) &&
+        bta_hl_validate_peer_cfg(app_idx, mcl_idx, mdl_idx,
+                                 p_dcb->peer_mdep_id,
+                                 p_dcb->peer_mdep_role,
+                                 sdp_idx))
+    {
+
+        p_mcb->data_psm = p_mcb->sdp.sdp_rec[sdp_idx].data_psm;
+        if ( (result = MCA_CreateMdl((tMCA_CL) p_mcb->mcl_handle,
+                                     p_dcb->local_mdep_id,
+                                     p_mcb->data_psm,
+                                     p_dcb->mdl_id,
+                                     p_dcb->peer_mdep_id,
+                                     p_dcb->local_cfg,
+                                     NULL )) != MCA_SUCCESS)
+        {
+            APPL_TRACE_ERROR1("MCA_CreateMdl FAIL mca_result=%d", result);
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("MCA Create- SDP idx or peer MDEP cfg not found");
+        bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_sdp_fail
+**
+** Description      Action routine for processing the SDP failed event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_sdp_fail(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                         tBTA_HL_DATA *p_data)
+{
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_dch_sdp_fail");
+#endif
+    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback
+**
+** Description      This is the SDP callback function used by HL.
+**                  This function will be executed by SDP when the service
+**                  search is completed.  If the search is successful, it
+**                  finds the first record in the database that matches the
+**                  UUID of the search.  Then retrieves the scn from the
+**                  record.
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback(UINT8 sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                             UINT8 mdl_idx, UINT16 status)
+{
+    tBTA_HL_MCL_CB                  *p_cb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_SDP_REC                 *p_hdp_rec;
+    tBTA_HL_CCH_SDP                 *p_cch_buf;
+    tBTA_HL_DCH_SDP                 *p_dch_buf;
+    tSDP_DISC_REC                   *p_rec = NULL;
+    tSDP_PROTOCOL_ELEM              pe;
+    tSDP_DISC_ATTR                  *p_attr;
+    UINT8                           i, rec_cnt;
+    tBTA_HL_SUP_FEATURE_LIST_ELEM   sup_feature;
+    BOOLEAN                         sdp_parsing_ok =FALSE, result=FALSE;
+    UINT16                          event;
+    tBTA_HL_MDL_CB                  *p_dcb;
+    UINT16                          service_uuid;
+    UINT16                          name_len;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG5("bta_hl_sdp_cback status:%d sdp_oper=%d app_idx=%d, mcl_idx=%d,   mdl_idx=%d",
+                      status, sdp_oper, app_idx, mcl_idx, mdl_idx);
+#endif
+
+    rec_cnt = 0;
+    service_uuid = bta_hl_get_service_uuids(sdp_oper, app_idx, mcl_idx, mdl_idx);
+
+    if (status == SDP_SUCCESS || status == SDP_DB_FULL)
+    {
+        memset(&p_cb->sdp,0, sizeof(tBTA_HL_SDP));
+        do
+        {
+            if (bta_hl_find_service_in_db(app_idx, mcl_idx, service_uuid, &p_rec))
+            {
+                p_hdp_rec = &p_cb->sdp.sdp_rec[rec_cnt];
+                p_cb->sdp.num_recs = rec_cnt+1;
+            }
+            else
+            {
+                break;
+            }
+
+            if (SDP_FindProtocolListElemInRec(p_rec, UUID_PROTOCOL_L2CAP, &pe))
+            {
+                p_hdp_rec->ctrl_psm  = (UINT16) pe.params[0];
+            }
+            else
+            {
+                APPL_TRACE_WARNING0("Control PSM not found");
+                break;
+            }
+            if (SDP_FindAddProtoListsElemInRec(p_rec, UUID_PROTOCOL_L2CAP, &pe))
+            {
+                p_hdp_rec->data_psm = (UINT16) pe.params[0];
+            }
+            else
+            {
+                APPL_TRACE_WARNING0("Data PSM not found");
+                break;
+            }
+
+            p_hdp_rec->srv_name[0]= '\0';
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_SERVICE_NAME)) != NULL)
+            {
+                if (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) < BT_MAX_SERVICE_NAME_LEN)
+                    name_len = (UINT16)SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+                else
+                    name_len = BT_MAX_SERVICE_NAME_LEN;
+                memcpy(p_hdp_rec->srv_name, p_attr->attr_value.v.array, name_len);
+            }
+
+            p_hdp_rec->srv_desp[0]= '\0';
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_SERVICE_DESCRIPTION)) != NULL)
+            {
+                if (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) < BT_MAX_SERVICE_NAME_LEN)
+                    name_len = (UINT16)SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+                else
+                    name_len = BT_MAX_SERVICE_NAME_LEN;
+                memcpy(p_hdp_rec->srv_desp, p_attr->attr_value.v.array, name_len);
+            }
+
+
+            p_hdp_rec->provider_name[0]= '\0';
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_PROVIDER_NAME)) != NULL)
+            {
+                if (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) < BT_MAX_SERVICE_NAME_LEN)
+                    name_len = (UINT16)SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+                else
+                    name_len = BT_MAX_SERVICE_NAME_LEN;
+                memcpy(p_hdp_rec->provider_name, p_attr->attr_value.v.array, name_len);
+            }
+
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_HDP_MCAP_SUP_PROC))!=NULL)
+            {
+                p_hdp_rec->mcap_sup_proc = p_attr->attr_value.v.u8;
+            }
+            else
+            {
+                APPL_TRACE_WARNING0("MCAP SUP PROC not found");
+                break;
+            }
+
+            if ((p_attr = SDP_FindAttributeInRec(p_rec, ATTR_ID_HDP_SUP_FEAT_LIST ))!=NULL)
+            {
+                if (bta_hl_fill_sup_feature_list (p_attr, &sup_feature))
+                {
+                    p_hdp_rec->num_mdeps = (UINT8) sup_feature.num_elems;
+                    for (i=0; i<sup_feature.num_elems; i++)
+                    {
+                        p_hdp_rec->mdep_cfg[i].data_type = sup_feature.list_elem[i].data_type;
+                        p_hdp_rec->mdep_cfg[i].mdep_id = sup_feature.list_elem[i].mdep_id;
+                        p_hdp_rec->mdep_cfg[i].mdep_role = sup_feature.list_elem[i].mdep_role;
+                        /* Check MDEP Description pointer to prevent crash due to null pointer */
+                        if (sup_feature.list_elem[i].p_mdep_desp != NULL)
+                        {
+                            BCM_STRNCPY_S(p_hdp_rec->mdep_cfg[i].mdep_desp,
+                                    sizeof(p_hdp_rec->mdep_cfg[i].mdep_desp),
+                                    sup_feature.list_elem[i].p_mdep_desp,
+                                    BTA_HL_MDEP_DESP_LEN);
+                        }
+                        else
+                        {
+                            APPL_TRACE_ERROR1("bta_hl_sdp_cback Incorrect Mdep[%d] Description (Null ptr)", i);
+                        }
+                    }
+
+                    sdp_parsing_ok = TRUE;
+                }
+                else
+                {
+                    APPL_TRACE_WARNING0("HDP supported feature list fill failed");
+                    break;
+                }
+            }
+            else
+            {
+                APPL_TRACE_WARNING0("HDP supported feature list not found");
+                break;
+            }
+#if BTA_HL_DEBUG == TRUE
+            APPL_TRACE_DEBUG3("record=%d ctrl_psm=%0x data_psm=%x",
+                              rec_cnt+1,
+                              p_hdp_rec->ctrl_psm,
+                              p_hdp_rec->data_psm );
+            APPL_TRACE_DEBUG1("srv_name=[%s]",(p_hdp_rec->srv_name[0] != '\0')? p_hdp_rec->srv_name:"NULL");
+            APPL_TRACE_DEBUG1("srv_desp=[%s]",(p_hdp_rec->srv_desp[0] != '\0')? p_hdp_rec->srv_desp:"NULL");
+            for (i=0; i<sup_feature.num_elems; i++)
+            {
+                APPL_TRACE_DEBUG5("index=0x%02x mdep_id=0x%04x data type=0x%04x mdep role=%s(0x%02x)",
+                                  (i+1),
+                                  p_hdp_rec->mdep_cfg[i].mdep_id,
+                                  p_hdp_rec->mdep_cfg[i].data_type,
+                                  (p_hdp_rec->mdep_cfg[i].mdep_role == BTA_HL_MDEP_ROLE_SOURCE)?"Src":"Snk",
+                                  p_hdp_rec->mdep_cfg[i].mdep_role);
+            }
+            APPL_TRACE_DEBUG1("provider_name=[%s]",(p_hdp_rec->provider_name[0] != '\0')? p_hdp_rec->provider_name:"NULL");
+            APPL_TRACE_DEBUG1("found MCAP sup procedure=%d",
+                              p_cb->sdp.sdp_rec[rec_cnt].mcap_sup_proc );
+#endif
+            rec_cnt++;
+            if (rec_cnt >= BTA_HL_NUM_SDP_RECS)
+            {
+                APPL_TRACE_WARNING1("No more spaces for SDP recs max_rec_cnt=%d", BTA_HL_NUM_SDP_RECS);
+                break;
+            }
+
+
+        } while (TRUE);
+    }
+
+
+    utl_freebuf((void **)&p_cb->p_db);
+
+    if ( (status == SDP_SUCCESS || status == SDP_DB_FULL) &&
+         p_cb->sdp.num_recs  &&
+         sdp_parsing_ok)
+    {
+        result = TRUE;
+    }
+    else
+    {
+        APPL_TRACE_WARNING3("SDP Failed sdp_status=%d num_recs=%d sdp_parsing_ok=%d ",
+                            status, p_cb->sdp.num_recs,sdp_parsing_ok );
+    }
+
+
+    p_cb->sdp_oper = BTA_HL_SDP_OP_NONE;
+
+    switch (sdp_oper )
+    {
+        case BTA_HL_SDP_OP_CCH_INIT:
+        case BTA_HL_SDP_OP_SDP_QUERY_NEW:
+        case BTA_HL_SDP_OP_SDP_QUERY_CURRENT:
+
+            /* send result in event back to BTA */
+            if ((p_cch_buf = (tBTA_HL_CCH_SDP *) GKI_getbuf(sizeof(tBTA_HL_CCH_SDP))) != NULL)
+            {
+                if (result)
+                {
+                    if (sdp_oper == BTA_HL_SDP_OP_CCH_INIT)
+                    {
+                        event = BTA_HL_CCH_SDP_OK_EVT;
+                        if (p_cb->close_pending)
+                        {
+                            event = BTA_HL_CCH_SDP_FAIL_EVT;
+                        }
+                    }
+                    else
+                    {
+                        event = BTA_HL_SDP_QUERY_OK_EVT;
+                    }
+                }
+                else
+                {
+                    if (sdp_oper == BTA_HL_SDP_OP_CCH_INIT)
+                    {
+                        event = BTA_HL_CCH_SDP_FAIL_EVT;
+                    }
+                    else
+                    {
+                        event = BTA_HL_SDP_QUERY_FAIL_EVT;
+                    }
+                }
+                p_cch_buf->hdr.event = event;
+
+                p_cch_buf->app_idx = app_idx;
+                p_cch_buf->mcl_idx = mcl_idx;
+                p_cch_buf->release_mcl_cb = FALSE;
+                if (sdp_oper == BTA_HL_SDP_OP_SDP_QUERY_NEW)
+                {
+                    p_cch_buf->release_mcl_cb = TRUE;
+                }
+
+                bta_sys_sendmsg(p_cch_buf);
+            }
+            break;
+        case BTA_HL_SDP_OP_DCH_OPEN_INIT:
+        case BTA_HL_SDP_OP_DCH_RECONNECT_INIT:
+            if ((p_dch_buf = (tBTA_HL_DCH_SDP *) GKI_getbuf(sizeof(tBTA_HL_DCH_SDP))) != NULL)
+            {
+                p_dch_buf->hdr.event = BTA_HL_DCH_SDP_FAIL_EVT;
+                p_dch_buf->app_idx = app_idx;
+                p_dch_buf->mcl_idx = mcl_idx;
+                p_dch_buf->mdl_idx = mdl_idx;
+                p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+                if (p_dcb->abort_oper & BTA_HL_ABORT_PENDING_MASK)
+                {
+                    p_dcb->abort_oper &= ~BTA_HL_ABORT_PENDING_MASK;
+                    result = FALSE;
+                }
+                if (result)
+                {
+                    if (sdp_oper == BTA_HL_SDP_OP_DCH_OPEN_INIT)
+                    {
+                        if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID )
+                        {
+                            p_dch_buf->hdr.event = BTA_HL_DCH_ECHO_TEST_EVT;
+                        }
+                        else
+                        {
+                            p_dch_buf->hdr.event = BTA_HL_DCH_OPEN_EVT;
+                        }
+                    }
+                    else
+                    {
+                        p_dch_buf->hdr.event = BTA_HL_DCH_RECONNECT_EVT;
+                    }
+                }
+                bta_sys_sendmsg(p_dch_buf);
+            }
+            break;
+        default:
+            break;
+    }
+}
+
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback0
+**
+** Description      This is the SDP callback function used by index = 0
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback0(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[0].sdp_oper,
+                     bta_hl_cb.scb[0].app_idx,
+                     bta_hl_cb.scb[0].mcl_idx,
+                     bta_hl_cb.scb[0].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(0);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback1
+**
+** Description      This is the SDP callback function used by index = 1
+**
+** Parameters       status  - status of the SDP callabck
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback1(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[1].sdp_oper,
+                     bta_hl_cb.scb[1].app_idx,
+                     bta_hl_cb.scb[1].mcl_idx,
+                     bta_hl_cb.scb[1].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(1);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback2
+**
+** Description      This is the SDP callback function used by index = 2
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback2(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[2].sdp_oper,
+                     bta_hl_cb.scb[2].app_idx,
+                     bta_hl_cb.scb[2].mcl_idx,
+                     bta_hl_cb.scb[2].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(2);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback3
+**
+** Description      This is the SDP callback function used by index = 3
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback3(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[3].sdp_oper,
+                     bta_hl_cb.scb[3].app_idx,
+                     bta_hl_cb.scb[3].mcl_idx,
+                     bta_hl_cb.scb[3].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(3);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback4
+**
+** Description      This is the SDP callback function used by index = 4
+**
+** Parameters       status  - status of the SDP callabck
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback4(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[4].sdp_oper,
+                     bta_hl_cb.scb[4].app_idx,
+                     bta_hl_cb.scb[4].mcl_idx,
+                     bta_hl_cb.scb[4].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(4);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback5
+**
+** Description      This is the SDP callback function used by index = 5
+**
+** Parameters       status  - status of the SDP callabck
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback5(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[5].sdp_oper,
+                     bta_hl_cb.scb[5].app_idx,
+                     bta_hl_cb.scb[5].mcl_idx,
+                     bta_hl_cb.scb[5].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(5);
+}
+
+/******************************************************************************
+**
+** Function         bta_hl_sdp_cback6
+**
+** Description      This is the SDP callback function used by index = 6
+**
+** Returns          void.
+**
+******************************************************************************/
+static void bta_hl_sdp_cback6(UINT16 status)
+{
+    bta_hl_sdp_cback(bta_hl_cb.scb[6].sdp_oper,
+                     bta_hl_cb.scb[6].app_idx,
+                     bta_hl_cb.scb[6].mcl_idx,
+                     bta_hl_cb.scb[6].mdl_idx,
+                     status);
+    bta_hl_deallocate_spd_cback(6);
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_deallocate_spd_cback
+**
+** Description   Deallocate a SDP control block
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+void bta_hl_deallocate_spd_cback(UINT8 sdp_cback_idx)
+{
+    tBTA_HL_SDP_CB *p_spd_cb = &bta_hl_cb.scb[sdp_cback_idx];
+
+    memset(p_spd_cb, 0, sizeof(tBTA_HL_SDP_CB));
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_deallocate_spd_cback index=%d", sdp_cback_idx);
+#endif
+
+
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_allocate_spd_cback
+**
+** Description   Finds a not in used SDP control block index
+**
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+tSDP_DISC_CMPL_CB *bta_hl_allocate_spd_cback(tBTA_HL_SDP_OPER sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                                             UINT8 mdl_idx,
+                                             UINT8 *p_sdp_cback_idx)
+{
+    UINT8 i;
+    tSDP_DISC_CMPL_CB *p_cbcak=NULL;
+
+
+    for (i=0; i < BTA_HL_NUM_SDP_CBACKS ; i ++)
+    {
+        if (!bta_hl_cb.scb[i].in_use)
+        {
+            p_cbcak = bta_hl_sdp_cback_arr[i];
+            bta_hl_cb.scb[i].in_use = TRUE;
+            bta_hl_cb.scb[i].sdp_oper = sdp_oper;
+            bta_hl_cb.scb[i].app_idx = app_idx;
+            bta_hl_cb.scb[i].mcl_idx = mcl_idx;
+            bta_hl_cb.scb[i].mdl_idx = mdl_idx;
+            *p_sdp_cback_idx = i;
+            break;
+        }
+    }
+
+    if (i == BTA_HL_NUM_SDP_CBACKS)
+    {
+        APPL_TRACE_WARNING0("No scb is available to allocate")
+    }
+    else
+    {
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_allocate_spd_cback cback_idx=%d ",i );
+    APPL_TRACE_DEBUG4("sdp_oper=%d, app_idx=%d, mcl_idx=%d,  mdl_idx=%d",
+                      bta_hl_cb.scb[i].sdp_oper,
+                      bta_hl_cb.scb[i].app_idx,
+                      bta_hl_cb.scb[i].mcl_idx,
+                      bta_hl_cb.scb[i].mdl_idx );
+#endif
+    }
+    return p_cbcak;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_init_sdp
+**
+** Description      Action routine for processing the SDP initiattion request
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTA_HL_STATUS bta_hl_init_sdp(tBTA_HL_SDP_OPER sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                               UINT8 mdl_idx)
+{
+    tBTA_HL_MCL_CB      *p_cb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tSDP_UUID           uuid_list;
+    UINT16              attr_list[BTA_HL_NUM_SRCH_ATTR];
+    UINT16              num_attrs = BTA_HL_NUM_SRCH_ATTR;
+    tBTA_HL_STATUS      status;
+    UINT8               sdp_cback_idx;
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG4("bta_hl_init_sdp sdp_oper=%d app_idx=%d mcl_idx=%d, mdl_idx=%d",
+                      sdp_oper, app_idx, mcl_idx, mdl_idx);
+#endif
+    if ((p_cb->sdp_cback = bta_hl_allocate_spd_cback(sdp_oper, app_idx, mcl_idx, mdl_idx, &sdp_cback_idx)) != NULL)
+    {
+        if ( p_cb->p_db ||
+             (!p_cb->p_db &&
+              (p_cb->p_db = (tSDP_DISCOVERY_DB *) GKI_getbuf(BTA_HL_DISC_SIZE)) != NULL))
+        {
+            attr_list[0] = ATTR_ID_SERVICE_CLASS_ID_LIST;
+            attr_list[1] = ATTR_ID_PROTOCOL_DESC_LIST;
+            attr_list[2] = ATTR_ID_BT_PROFILE_DESC_LIST;
+            attr_list[3] = ATTR_ID_ADDITION_PROTO_DESC_LISTS;
+            attr_list[4] = ATTR_ID_SERVICE_NAME;
+            attr_list[5] = ATTR_ID_SERVICE_DESCRIPTION;
+            attr_list[6] = ATTR_ID_PROVIDER_NAME;
+            attr_list[7] = ATTR_ID_HDP_SUP_FEAT_LIST;
+            attr_list[8] = ATTR_ID_HDP_DATA_EXCH_SPEC;
+            attr_list[9] = ATTR_ID_HDP_MCAP_SUP_PROC;
+
+
+            uuid_list.len = LEN_UUID_16;
+            uuid_list.uu.uuid16 = UUID_SERVCLASS_HDP_PROFILE;
+
+            SDP_InitDiscoveryDb(p_cb->p_db, BTA_HL_DISC_SIZE, 1, &uuid_list, num_attrs, attr_list);
+
+            if (!SDP_ServiceSearchAttributeRequest(p_cb->bd_addr, p_cb->p_db, p_cb->sdp_cback))
+            {
+                status = BTA_HL_STATUS_FAIL;
+            }
+            else
+            {
+                status = BTA_HL_STATUS_OK;
+            }
+        }
+        else    /* No services available */
+        {
+            status = BTA_HL_STATUS_NO_RESOURCE;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_SDP_NO_RESOURCE;
+    }
+
+    if (status != BTA_HL_STATUS_OK)
+    {
+        utl_freebuf((void **)&p_cb->p_db);
+        if (status != BTA_HL_STATUS_SDP_NO_RESOURCE )
+        {
+            bta_hl_deallocate_spd_cback(sdp_cback_idx);
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_sdp_init
+**
+** Description      Action routine for processing the CCH SDP init event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_sdp_init(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_MCL_CB      *p_cb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_init_sdp");
+#endif
+    if ( p_cb->sdp_oper == BTA_HL_SDP_OP_NONE)
+    {
+        p_cb->sdp_oper = BTA_HL_SDP_OP_CCH_INIT;
+
+        if (bta_hl_init_sdp( p_cb->sdp_oper, app_idx, mcl_idx, 0xFF) != BTA_HL_STATUS_OK)
+        {
+            p_cb->sdp_oper = BTA_HL_SDP_OP_NONE;
+            bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_SDP_FAIL_EVT, p_data);
+        }
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("SDP in use");
+        bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_SDP_FAIL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_mca_open
+**
+** Description      Action routine for processing the CCH open request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_mca_open(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    UINT8               sdp_idx;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_mca_open");
+#endif
+
+    if (bta_hl_find_sdp_idx_using_ctrl_psm(&p_mcb->sdp, p_mcb->req_ctrl_psm, &sdp_idx))
+    {
+        p_mcb->ctrl_psm = p_mcb->sdp.sdp_rec[sdp_idx].ctrl_psm;
+        p_mcb->data_psm = p_mcb->sdp.sdp_rec[sdp_idx].data_psm;
+        if ( MCA_ConnectReq((tMCA_HANDLE) p_acb->app_handle,
+                            p_mcb->bd_addr,
+                            p_mcb->ctrl_psm ,
+                            p_mcb->sec_mask) != MCA_SUCCESS)
+        {
+
+            bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_CMPL_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_mca_close
+**
+** Description      Action routine for processing the CCH close request
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_mca_close(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_mca_close");
+#endif
+    if (p_mcb->sdp_oper != BTA_HL_SDP_OP_CCH_INIT)
+    {
+        if ( MCA_DisconnectReq((tMCA_HANDLE) p_acb->app_handle) != MCA_SUCCESS)
+        {
+            bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_CMPL_EVT, p_data);
+        }
+    }
+    else
+    {
+        p_mcb->close_pending = TRUE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_close_cmpl
+**
+** Description      Action routine for processing the CCH close complete event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_close_cmpl(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+    tBTA_HL             evt_data;
+    tBTA_HL_EVT         event;
+    BOOLEAN             send_evt=TRUE;
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_close_cmpl");
+#endif
+    bta_sys_conn_close(BTA_ID_HL, p_acb->app_id, p_mcb->bd_addr);
+
+    switch (p_mcb->cch_oper)
+    {
+        case BTA_HL_CCH_OP_LOCAL_OPEN:
+            bta_hl_build_cch_open_cfm(&evt_data, p_acb->app_handle,
+                                      p_mcb->mcl_handle,
+                                      p_mcb->bd_addr,
+                                      BTA_HL_STATUS_FAIL);
+            event = BTA_HL_CCH_OPEN_CFM_EVT;
+            break;
+        case BTA_HL_CCH_OP_LOCAL_CLOSE:
+            bta_hl_build_cch_close_cfm(&evt_data,  p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       BTA_HL_STATUS_OK);
+            event = BTA_HL_CCH_CLOSE_CFM_EVT;
+            break;
+        case BTA_HL_CCH_OP_REMOTE_CLOSE:
+            bta_hl_build_cch_close_ind(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       p_mcb->intentional_close);
+            event = BTA_HL_CCH_CLOSE_IND_EVT;
+            break;
+        default:
+            send_evt=FALSE;
+            break;
+    }
+
+
+    memset(p_mcb, 0 ,sizeof(tBTA_HL_MCL_CB));
+
+    if (send_evt)p_acb->p_cback(event,(tBTA_HL *) &evt_data );
+
+    bta_hl_check_deregistration(app_idx, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_mca_disconnect
+**
+** Description      Action routine for processing the CCH disconnect indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_mca_disconnect(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb;
+    UINT8              i;
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_mca_disconnect");
+#endif
+
+    p_mcb->intentional_close = FALSE;
+    if (p_data->mca_evt.mca_data.disconnect_ind.reason == L2CAP_DISC_OK)
+    {
+        p_mcb->intentional_close = TRUE;
+    }
+
+    for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++)
+    {
+        p_dcb= BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, i);
+        if (p_dcb->in_use && (p_dcb->dch_state != BTA_HL_DCH_IDLE_ST))
+        {
+            if (p_mcb->cch_oper == BTA_HL_CCH_OP_LOCAL_CLOSE )
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, i, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+            }
+            else
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, i, BTA_HL_MCA_CLOSE_IND_EVT, p_data);
+            }
+        }
+    }
+    bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_CMPL_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_mca_rsp_tout
+**
+** Description      Action routine for processing the MCAP response timeout
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_mca_rsp_tout(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_mca_rsp_tout");
+#endif
+
+    p_mcb->rsp_tout = TRUE;
+
+    bta_hl_check_cch_close(app_idx,mcl_idx,p_data,TRUE);
+}
+/*******************************************************************************
+**
+** Function         bta_hl_cch_mca_connect
+**
+** Description      Action routine for processing the CCH connect indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_mca_connect(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL             evt_data;
+    tBTA_HL_EVT         event;
+    BOOLEAN             send_event=TRUE;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_cch_mca_connect");
+#endif
+
+    p_mcb->mcl_handle = p_data->mca_evt.mcl_handle;
+    bdcpy(p_mcb->bd_addr, p_data->mca_evt.mca_data.connect_ind.bd_addr);
+    p_mcb->cch_mtu = p_data->mca_evt.mca_data.connect_ind.mtu;
+
+    bta_sys_conn_open(BTA_ID_HL, p_acb->app_id, p_mcb->bd_addr);
+    switch (p_mcb->cch_oper)
+    {
+        case BTA_HL_CCH_OP_LOCAL_OPEN:
+            bta_hl_build_cch_open_cfm(&evt_data, p_acb->app_handle,
+                                      p_mcb->mcl_handle,
+                                      p_mcb->bd_addr,
+                                      BTA_HL_STATUS_OK);
+            event = BTA_HL_CCH_OPEN_CFM_EVT;
+            break;
+        case BTA_HL_CCH_OP_REMOTE_OPEN:
+            bta_hl_build_cch_open_ind(&evt_data, p_acb->app_handle,
+                                      p_mcb->mcl_handle,
+                                      p_mcb->bd_addr);
+            event = BTA_HL_CCH_OPEN_IND_EVT;
+            break;
+        default:
+            send_event = FALSE;
+            break;
+    }
+
+    p_mcb->cch_oper = BTA_HL_CCH_OP_NONE;
+    if (send_event) p_acb->p_cback(event,(tBTA_HL *) &evt_data );
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_mcap_ctrl_cback
+**
+** Description      MCAP control callback function for HL.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_mcap_ctrl_cback (tMCA_HANDLE handle, tMCA_CL mcl, UINT8 event,
+                             tMCA_CTRL *p_data)
+{
+    tBTA_HL_MCA_EVT * p_msg;
+    BOOLEAN send_event=TRUE;
+    UINT16 mca_event;
+
+#if (BTA_HL_DEBUG == TRUE)
+#if (BT_TRACE_VERBOSE == TRUE)
+    APPL_TRACE_EVENT1("bta_hl_mcap_ctrl_cback event[%s]",bta_hl_mcap_evt_code(event));
+#else
+    APPL_TRACE_EVENT1("bta_hl_mcap_ctrl_cback event[0x%02x]", event);
+#endif
+#endif
+
+    switch (event)
+    {
+
+        case MCA_CREATE_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CREATE_IND_EVT;
+            break;
+        case MCA_CREATE_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CREATE_CFM_EVT;
+            break;
+        case MCA_RECONNECT_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_RECONNECT_IND_EVT;
+            break;
+        case MCA_RECONNECT_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_RECONNECT_CFM_EVT;
+            break;
+        case MCA_ABORT_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_ABORT_IND_EVT;
+            break;
+        case MCA_ABORT_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_ABORT_CFM_EVT;
+            break;
+        case MCA_DELETE_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_DELETE_IND_EVT;
+            break;
+        case MCA_DELETE_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_DELETE_CFM_EVT;
+            break;
+        case MCA_CONNECT_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CONNECT_IND_EVT;
+            break;
+        case MCA_DISCONNECT_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_DISCONNECT_IND_EVT;
+            break;
+        case MCA_OPEN_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_OPEN_IND_EVT;
+            break;
+        case MCA_OPEN_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_OPEN_CFM_EVT;
+            break;
+        case MCA_CLOSE_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CLOSE_IND_EVT;
+            break;
+        case MCA_CLOSE_CFM_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CLOSE_CFM_EVT;
+            break;
+        case MCA_CONG_CHG_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_CONG_CHG_EVT;
+            break;
+        case MCA_RSP_TOUT_IND_EVT:
+            mca_event = (UINT16) BTA_HL_MCA_RSP_TOUT_IND_EVT;
+            break;
+        case MCA_ERROR_RSP_EVT:
+
+        default:
+            send_event=FALSE;
+            break;
+    }
+
+    if ((p_msg = (tBTA_HL_MCA_EVT *)GKI_getbuf(sizeof(tBTA_HL_MCA_EVT))) != NULL)
+    {
+        p_msg->hdr.event = mca_event;
+        p_msg->app_handle = (tBTA_HL_APP_HANDLE) handle;
+        p_msg->mcl_handle = (tBTA_HL_MCL_HANDLE) mcl;
+        memcpy (&p_msg->mca_data, p_data, sizeof(tMCA_CTRL));
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_mcap_data_cback
+**
+** Description      MCAP data callback function for HL.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_mcap_data_cback (tMCA_DL mdl, BT_HDR *p_pkt)
+{
+    tBTA_HL_MCA_RCV_DATA_EVT *p_msg;
+
+    UINT8 app_idx, mcl_idx, mdl_idx;
+    if (bta_hl_find_mdl_idx_using_handle ((tBTA_HL_MDL_HANDLE)mdl, &app_idx, &mcl_idx, &mdl_idx))
+    {
+        if ((p_msg = (tBTA_HL_MCA_RCV_DATA_EVT *)GKI_getbuf(sizeof(tBTA_HL_MCA_RCV_DATA_EVT))) != NULL)
+        {
+            p_msg->hdr.event = BTA_HL_MCA_RCV_DATA_EVT;
+            p_msg->app_idx = app_idx;
+            p_msg->mcl_idx = mcl_idx;
+            p_msg->mdl_idx = mdl_idx;
+            p_msg->p_pkt = p_pkt;
+            bta_sys_sendmsg(p_msg);
+        }
+    }
+}
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if (BTA_HL_DEBUG == TRUE && BT_TRACE_VERBOSE == TRUE)
+
+/*******************************************************************************
+**
+** Function         bta_hl_mcap_evt_code
+**
+** Description      get the MCAP event string pointer
+**
+** Returns          char * - event string pointer
+**
+*******************************************************************************/
+static char *bta_hl_mcap_evt_code(UINT8 evt_code)
+{
+
+    switch (evt_code)
+    {
+
+        case MCA_ERROR_RSP_EVT:
+            return "MCA_ERROR_RSP_EVT";
+        case MCA_CREATE_IND_EVT:
+            return "MCA_CREATE_IND_EVT";
+        case MCA_CREATE_CFM_EVT:
+            return "MCA_CREATE_CFM_EVT";
+        case MCA_RECONNECT_IND_EVT:
+            return "MCA_RECONNECT_IND_EVT";
+        case MCA_RECONNECT_CFM_EVT:
+            return "MCA_RECONNECT_CFM_EVT";
+        case MCA_ABORT_IND_EVT:
+            return "MCA_ABORT_IND_EVT";
+        case MCA_ABORT_CFM_EVT:
+            return "MCA_ABORT_CFM_EVT";
+        case MCA_DELETE_IND_EVT:
+            return "MCA_DELETE_IND_EVT";
+        case MCA_DELETE_CFM_EVT:
+            return "MCA_DELETE_CFM_EVT";
+
+        case MCA_CONNECT_IND_EVT:
+            return "MCA_CONNECT_IND_EVT";
+        case MCA_DISCONNECT_IND_EVT:
+            return "MCA_DISCONNECT_IND_EVT";
+        case MCA_OPEN_IND_EVT:
+            return "MCA_OPEN_IND_EVT";
+        case MCA_OPEN_CFM_EVT:
+            return "MCA_OPEN_CFM_EVT";
+        case MCA_CLOSE_IND_EVT:
+            return "MCA_CLOSE_IND_EVT";
+        case MCA_CLOSE_CFM_EVT:
+            return "MCA_CLOSE_CFM_EVT";
+        case MCA_CONG_CHG_EVT:
+            return "MCA_CONG_CHG_EVT";
+        case MCA_RSP_TOUT_IND_EVT:
+            return "MCA_RSP_TOUT_IND_EVT";
+        default:
+            return "Unknown MCAP event code";
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_cback_evt_code
+**
+** Description      get the HDP event string pointer
+**
+** Returns          char * - event string pointer
+**
+*******************************************************************************/
+static char *bta_hl_cback_evt_code(UINT8 evt_code)
+{
+
+    switch (evt_code)
+    {
+
+        case BTA_HL_CCH_OPEN_IND_EVT:
+            return "BTA_HL_CCH_OPEN_IND_EVT";
+        case BTA_HL_CCH_OPEN_CFM_EVT:
+            return "BTA_HL_CCH_OPEN_CFM_EVT";
+        case BTA_HL_CCH_CLOSE_IND_EVT:
+            return "BTA_HL_CCH_CLOSE_IND_EVT";
+        case     BTA_HL_CCH_CLOSE_CFM_EVT:
+            return "BTA_HL_CCH_CLOSE_CFM_EVT";
+        case BTA_HL_DCH_OPEN_IND_EVT:
+            return "BTA_HL_DCH_OPEN_IND_EVT";
+        case BTA_HL_DCH_OPEN_CFM_EVT:
+            return "BTA_HL_DCH_OPEN_CFM_EVT";
+        case BTA_HL_DCH_CLOSE_IND_EVT:
+            return "BTA_HL_DCH_CLOSE_IND_EVT";
+        case BTA_HL_DCH_CLOSE_CFM_EVT:
+            return "BTA_HL_DCH_CLOSE_CFM_EVT";
+        case BTA_HL_DCH_RCV_DATA_IND_EVT:
+            return "BTA_HL_DCH_RCV_DATA_IND_EVT";
+        case BTA_HL_REGISTER_CFM_EVT:
+            return "BTA_HL_REGISTER_CFM_EVT";
+        case BTA_HL_DEREGISTER_CFM_EVT:
+            return "BTA_HL_DEREGISTER_CFM_EVT";
+        case BTA_HL_DCH_RECONNECT_CFM_EVT:
+            return "BTA_HL_DCH_RECONNECT_CFM_EVT";
+        case BTA_HL_DCH_RECONNECT_IND_EVT:
+            return "BTA_HL_DCH_RECONNECT_IND_EVT";
+        case BTA_HL_DCH_ECHO_TEST_CFM_EVT:
+            return "BTA_HL_DCH_ECHO_TEST_CFM_EVT";
+        case BTA_HL_SDP_QUERY_CFM_EVT:
+            return "BTA_HL_SDP_QUERY_CFM_EVT";
+        case BTA_HL_CONG_CHG_IND_EVT:
+            return "BTA_HL_CONG_CHG_IND_EVT";
+        case BTA_HL_DCH_CREATE_IND_EVT:
+            return "BTA_HL_DCH_CREATE_IND_EVT";
+        case BTA_HL_DELETE_MDL_IND_EVT:
+            return "BTA_HL_DELETE_MDL_IND_EVT";
+        case BTA_HL_DELETE_MDL_CFM_EVT:
+            return "BTA_HL_DELETE_MDL_CFM_EVT";
+        case BTA_HL_DCH_ABORT_IND_EVT:
+            return "BTA_HL_DCH_ABORT_IND_EVT";
+        case BTA_HL_DCH_ABORT_CFM_EVT:
+            return "BTA_HL_DCH_ABORT_CFM_EVT";
+        default:
+            return "Unknown HDP event code";
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_oper_code
+**
+** Description      Get the DCH operation string
+**
+** Returns          char * - DCH operation string pointer
+**
+*******************************************************************************/
+static char *bta_hl_dch_oper_code(tBTA_HL_DCH_OPER oper_code)
+{
+
+    switch (oper_code)
+    {
+        case BTA_HL_DCH_OP_NONE:
+            return "BTA_HL_DCH_OP_NONE";
+        case BTA_HL_DCH_OP_REMOTE_CREATE:
+            return "BTA_HL_DCH_OP_REMOTE_CREATE";
+        case BTA_HL_DCH_OP_LOCAL_OPEN:
+            return "BTA_HL_DCH_OP_LOCAL_OPEN";
+        case BTA_HL_DCH_OP_REMOTE_OPEN:
+            return "BTA_HL_DCH_OP_REMOTE_OPEN";
+        case BTA_HL_DCH_OP_LOCAL_CLOSE:
+            return "BTA_HL_DCH_OP_LOCAL_CLOSE";
+        case BTA_HL_DCH_OP_REMOTE_CLOSE:
+            return "BTA_HL_DCH_OP_REMOTE_CLOSE";
+        case BTA_HL_DCH_OP_LOCAL_DELETE:
+            return "BTA_HL_DCH_OP_LOCAL_DELETE";
+        case BTA_HL_DCH_OP_REMOTE_DELETE:
+            return "BTA_HL_DCH_OP_REMOTE_DELETE";
+        case BTA_HL_DCH_OP_LOCAL_RECONNECT:
+            return "BTA_HL_DCH_OP_LOCAL_RECONNECT";
+        case BTA_HL_DCH_OP_REMOTE_RECONNECT:
+            return "BTA_HL_DCH_OP_REMOTE_RECONNECT";
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST:
+            return "BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST";
+        case BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT:
+            return "BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT";
+        default:
+            return "Unknown DCH oper code";
+    }
+}
+
+
+#endif  /* Debug Functions */
+#endif /* HL_INCLUDED */
diff --git a/bta/hl/bta_hl_api.c b/bta/hl/bta_hl_api.c
new file mode 100644
index 0000000..8c8d621
--- /dev/null
+++ b/bta/hl/bta_hl_api.c
@@ -0,0 +1,485 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for the HeaLth device profile (HL)
+ *  subsystem of BTA, Broadcom Corp's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE)
+
+#include "gki.h"
+#include "bd.h"
+#include "bta_hl_api.h"
+#include "bta_hl_int.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_hl_reg =
+{
+    bta_hl_hdl_event,
+    BTA_HlDisable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_HlEnable
+**
+** Description      Enable the HL subsystems.  This function must be
+**                  called before any other functions in the HL API are called.
+**                  When the enable operation is completed the callback function
+**                  will be called with an BTA_HL_CTRL_ENABLE_CFM_EVT event.
+**
+** Parameters       p_cback - HL event call back function
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlEnable(tBTA_HL_CTRL_CBACK *p_ctrl_cback)
+{
+    tBTA_HL_API_ENABLE *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_HL, &bta_hl_reg);
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_HL_API_ENABLE *)GKI_getbuf(sizeof(tBTA_HL_API_ENABLE))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_HL_API_ENABLE_EVT;
+        p_buf->p_cback      = p_ctrl_cback;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDisable
+**
+** Description     Disable the HL subsystem.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    bta_sys_deregister(BTA_ID_HL);
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_HL_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlRegister
+**
+** Description      Register an HDP application
+**
+** Parameters       app_id        - Application ID
+**                  p_reg_param   - non-platform related parameters for the
+**                                  HDP application
+**                  p_cback       - HL event callback fucntion
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlRegister(UINT8  app_id,
+                    tBTA_HL_REG_PARAM *p_reg_param,
+                    tBTA_HL_CBACK *p_cback)
+{
+    tBTA_HL_API_REGISTER *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_REGISTER *)GKI_getbuf((UINT16)sizeof(tBTA_HL_API_REGISTER))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_HL_API_REGISTER_EVT;
+        p_buf->app_id       = app_id;
+        p_buf->sec_mask     = (p_reg_param->sec_mask | BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+        p_buf->p_cback = p_cback;
+        if (p_reg_param->p_srv_name)
+        {
+            BCM_STRNCPY_S(p_buf->srv_name, sizeof(p_buf->srv_name),
+                          p_reg_param->p_srv_name, BTA_SERVICE_NAME_LEN);
+            p_buf->srv_name[BTA_SERVICE_NAME_LEN] = '\0';
+        }
+        else
+            p_buf->srv_name[0]= '\0';
+
+        if (p_reg_param->p_srv_desp)
+        {
+            BCM_STRNCPY_S(p_buf->srv_desp, sizeof(p_buf->srv_desp),
+                          p_reg_param->p_srv_desp, BTA_SERVICE_DESP_LEN);
+            p_buf->srv_desp[BTA_SERVICE_DESP_LEN]= '\0';
+        }
+        else
+            p_buf->srv_desp[0]= '\0';
+
+        if (p_reg_param->p_provider_name)
+        {
+            BCM_STRNCPY_S(p_buf->provider_name, sizeof(p_buf->provider_name),
+                          p_reg_param->p_provider_name, BTA_PROVIDER_NAME_LEN);
+            p_buf->provider_name[BTA_PROVIDER_NAME_LEN]= '\0';
+        }
+        else
+            p_buf->provider_name[0]= '\0';
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDeregister
+**
+** Description      Deregister an HDP application
+**
+** Parameters       app_handle - Application handle
+**
+** Returns           void
+**
+*******************************************************************************/
+void BTA_HlDeregister(tBTA_HL_APP_HANDLE app_handle)
+{
+    tBTA_HL_API_DEREGISTER  *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DEREGISTER *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DEREGISTER)))) != NULL)
+    {
+        p_buf->hdr.event   = BTA_HL_API_DEREGISTER_EVT;
+        p_buf->app_handle  = app_handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+/*******************************************************************************
+**
+** Function         BTA_HlCchOpen
+**
+** Description      Open a Control channel connection with the specified BD address
+**
+** Parameters       app_handle - Application Handle
+**                  p_open_param - parameters for opening a control channel
+**
+** Returns          void
+**
+**                  Note: The control PSM value is used to select which
+**                  HDP insatnce should be used in case the peer device support
+**                  multiple HDP instances. Also, if the control PSM value is zero
+**                  then the first HDP instance is used for the control channel setup
+*******************************************************************************/
+void BTA_HlCchOpen(tBTA_HL_APP_HANDLE app_handle,
+                   tBTA_HL_CCH_OPEN_PARAM *p_open_param)
+{
+    tBTA_HL_API_CCH_OPEN *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_CCH_OPEN *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_CCH_OPEN)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_CCH_OPEN_EVT;
+        p_buf->app_handle       = app_handle;
+        p_buf->sec_mask = (p_open_param->sec_mask | BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+        bdcpy(p_buf->bd_addr, p_open_param->bd_addr);
+        p_buf->ctrl_psm       = p_open_param->ctrl_psm;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlCchClose
+**
+** Description      Close a Control channel connection with the specified MCL
+**                  handle
+**
+** Parameters       mcl_handle - MCL handle
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlCchClose(tBTA_HL_MCL_HANDLE mcl_handle)
+{
+    tBTA_HL_API_CCH_CLOSE *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_CCH_CLOSE *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_CCH_CLOSE)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_CCH_CLOSE_EVT;
+        p_buf->mcl_handle       = mcl_handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchOpen
+**
+** Description      Open a data channel connection with the specified DCH parameters
+**
+** Parameters       mcl_handle - MCL handle
+**                  p_open_param - parameters for opening a data channel
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchOpen(tBTA_HL_MCL_HANDLE mcl_handle,
+                   tBTA_HL_DCH_OPEN_PARAM *p_open_param)
+{
+    tBTA_HL_API_DCH_OPEN *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_OPEN *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_OPEN)))) != NULL)
+    {
+        p_buf->hdr.event            = BTA_HL_API_DCH_OPEN_EVT;
+        p_buf->mcl_handle           = mcl_handle;
+        p_buf->ctrl_psm             = p_open_param->ctrl_psm;
+        p_buf->local_mdep_id        = p_open_param->local_mdep_id;
+        p_buf->peer_mdep_id         = p_open_param->peer_mdep_id;
+        p_buf->local_cfg            = p_open_param->local_cfg;
+        p_buf->sec_mask             = (p_open_param->sec_mask | BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchReconnect
+**
+** Description      Reconnect a data channel with the specified MDL_ID
+**
+** Parameters       mcl_handle      - MCL handle
+*8                  p_recon_param   - parameters for reconnecting a data channel
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchReconnect(tBTA_HL_MCL_HANDLE mcl_handle,
+                        tBTA_HL_DCH_RECONNECT_PARAM *p_recon_param)
+{
+    tBTA_HL_API_DCH_RECONNECT *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_RECONNECT *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_RECONNECT)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_DCH_RECONNECT_EVT;
+        p_buf->mcl_handle       = mcl_handle;
+        p_buf->ctrl_psm         = p_recon_param->ctrl_psm;
+        p_buf->mdl_id           = p_recon_param->mdl_id;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchClose
+**
+** Description      Close a data channel with the specified MDL handle
+**
+** Parameters       mdl_handle  - MDL handle
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchClose(tBTA_HL_MDL_HANDLE mdl_handle)
+{
+    tBTA_HL_API_DCH_CLOSE *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_CLOSE *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_CLOSE)))) != NULL)
+    {
+        p_buf->hdr.event    = BTA_HL_API_DCH_CLOSE_EVT;
+        p_buf->mdl_handle   = mdl_handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchAbort
+**
+** Description      Abort the current data channel setup with the specified MCL
+**                  handle
+**
+** Parameters       mcl_handle  - MCL handle
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchAbort(tBTA_HL_MCL_HANDLE mcl_handle)
+{
+    tBTA_HL_API_DCH_ABORT *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_ABORT *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_ABORT)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_DCH_ABORT_EVT;
+        p_buf->mcl_handle       = mcl_handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlSendData
+**
+** Description      Send an APDU to the peer device
+**
+** Parameters       mdl_handle  - MDL handle
+**                  pkt_size    - size of the data packet to be sent
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlSendData(tBTA_HL_MDL_HANDLE mdl_handle,
+                    UINT16           pkt_size)
+{
+    tBTA_HL_API_SEND_DATA *p_buf = NULL;
+
+    if ((p_buf = (tBTA_HL_API_SEND_DATA *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_SEND_DATA)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_SEND_DATA_EVT;
+        p_buf->mdl_handle       = mdl_handle;
+        p_buf->pkt_size         = pkt_size;
+        bta_sys_sendmsg(p_buf);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDeleteMdl
+**
+** Description      Delete the specified MDL_ID within the specified MCL handle
+**
+** Parameters       mcl_handle  - MCL handle
+**                  mdl_id      - MDL ID
+**
+** Returns          void
+**
+**                  note: If mdl_id = 0xFFFF then this means to delete all MDLs
+**                        and this value can only be used with DeleteMdl request only
+**                        not other requests
+**
+*******************************************************************************/
+void BTA_HlDeleteMdl(tBTA_HL_MCL_HANDLE mcl_handle,
+                     tBTA_HL_MDL_ID mdl_id )
+{
+    tBTA_HL_API_DELETE_MDL *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DELETE_MDL *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DELETE_MDL)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_DELETE_MDL_EVT;
+        p_buf->mcl_handle       = mcl_handle;
+        p_buf->mdl_id           = mdl_id;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchEchoTest
+**
+** Description      Initiate an echo test with the specified MCL handle
+**
+** Parameters       mcl_handle           - MCL handle
+*8                  p_echo_test_param   -  parameters for echo testing
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchEchoTest( tBTA_HL_MCL_HANDLE  mcl_handle,
+                        tBTA_HL_DCH_ECHO_TEST_PARAM *p_echo_test_param)
+{
+    tBTA_HL_API_DCH_ECHO_TEST   *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_ECHO_TEST *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_ECHO_TEST)))) != NULL)
+    {
+        p_buf->hdr.event     = BTA_HL_API_DCH_ECHO_TEST_EVT;
+        p_buf->mcl_handle    = mcl_handle;
+        p_buf->ctrl_psm      = p_echo_test_param->ctrl_psm;
+        p_buf->local_cfg     = p_echo_test_param->local_cfg;
+        p_buf->pkt_size      = p_echo_test_param->pkt_size;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_HlSdpQuery
+**
+** Description      SDP query request for the specified BD address
+**
+** Parameters       app_handle      - application handle
+**                  bd_addr         - BD address
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlSdpQuery(tBTA_HL_APP_HANDLE app_handle,
+                    BD_ADDR bd_addr)
+{
+    tBTA_HL_API_SDP_QUERY *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_SDP_QUERY *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_SDP_QUERY)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_SDP_QUERY_EVT;
+        p_buf->app_handle       = app_handle;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchCreateMdlRsp
+**
+** Description      Set the Response and configuration values for the Create MDL
+**                  request
+**
+** Parameters       mcl_handle  - MCL handle
+**                  p_rsp_param - parameters specified whether the request should
+**                                be accepted or not and if it should be accepted
+**                                then it also specified the configuration response
+**                                value
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_HlDchCreateRsp(tBTA_HL_MCL_HANDLE mcl_handle,
+                        tBTA_HL_DCH_CREATE_RSP_PARAM *p_rsp_param)
+{
+    tBTA_HL_API_DCH_CREATE_RSP *p_buf;
+
+    if ((p_buf = (tBTA_HL_API_DCH_CREATE_RSP *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_API_DCH_CREATE_RSP)))) != NULL)
+    {
+        p_buf->hdr.event        = BTA_HL_API_DCH_CREATE_RSP_EVT;
+        p_buf->mcl_handle       = mcl_handle;
+        p_buf->mdl_id           = p_rsp_param->mdl_id;
+        p_buf->local_mdep_id    = p_rsp_param->local_mdep_id;
+        p_buf->rsp_code         = p_rsp_param->rsp_code;
+        p_buf->cfg_rsp          = p_rsp_param->cfg_rsp;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+#endif /* HL_INCLUDED */
diff --git a/bta/hl/bta_hl_ci.c b/bta/hl/bta_hl_ci.c
new file mode 100644
index 0000000..bd04b44
--- /dev/null
+++ b/bta/hl/bta_hl_ci.c
@@ -0,0 +1,171 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the HeaLth device profile (HL)
+ *  subsystem call-in functions.
+ *
+ ******************************************************************************/
+#include "bta_api.h"
+#include "btm_api.h"
+#include "bta_sys.h"
+#include "bta_hl_api.h"
+#include "bta_hl_co.h"
+#include "bta_hl_int.h"
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_get_tx_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_get_tx_data call-out function.
+**
+** Parameters       mdl_handle -MDL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_ci_get_tx_data(  tBTA_HL_MDL_HANDLE mdl_handle,
+                                            tBTA_HL_STATUS status,
+                                            UINT16 evt )
+{
+    tBTA_HL_CI_GET_PUT_DATA  *p_evt;
+
+#if  (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG3("bta_hl_ci_get_tx_data mdl_handle=%d status=%d evt=%d\n",
+                      mdl_handle, status, evt);
+#endif
+
+    if ((p_evt = (tBTA_HL_CI_GET_PUT_DATA *)GKI_getbuf(sizeof(tBTA_HL_CI_GET_PUT_DATA))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->mdl_handle =  mdl_handle;
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_put_rx_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_put_rx_data call-out function.
+**
+** Parameters       mdl_handle -MDL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_ci_put_rx_data(  tBTA_HL_MDL_HANDLE mdl_handle,
+                                            tBTA_HL_STATUS status,
+                                            UINT16 evt )
+{
+    tBTA_HL_CI_GET_PUT_DATA  *p_evt;
+#if  (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG3("bta_hl_ci_put_rx_data mdl_handle=%d status=%d evt=%d\n",
+                      mdl_handle, status, evt);
+#endif
+
+    if ((p_evt = (tBTA_HL_CI_GET_PUT_DATA *)GKI_getbuf(sizeof(tBTA_HL_CI_GET_PUT_DATA))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->mdl_handle =  mdl_handle;
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_get_echo_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_get_echo_data call-out function.
+**
+** Parameters       mcl_handle -MCL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_ci_get_echo_data(  tBTA_HL_MCL_HANDLE mcl_handle,
+                                              tBTA_HL_STATUS status,
+                                              UINT16 evt )
+{
+    tBTA_HL_CI_ECHO_DATA  *p_evt;
+
+#if  (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG3("bta_hl_ci_get_echo_data mcl_handle=%d status=%d evt=%d\n",
+                      mcl_handle, status, evt);
+#endif
+
+    if ((p_evt = (tBTA_HL_CI_ECHO_DATA *)GKI_getbuf(sizeof(tBTA_HL_CI_ECHO_DATA))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->mcl_handle =  mcl_handle;
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_put_echo_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_put_echo_data call-out function.
+**
+** Parameters       mcl_handle -MCL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_ci_put_echo_data(  tBTA_HL_MCL_HANDLE mcl_handle,
+                                              tBTA_HL_STATUS status,
+                                              UINT16 evt )
+{
+    tBTA_HL_CI_ECHO_DATA  *p_evt;
+
+#if  (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG3("bta_hl_ci_put_echo_data mcl_handle=%d status=%d evt=%d\n",
+                      mcl_handle, status, evt);
+#endif
+
+    if ((p_evt = (tBTA_HL_CI_ECHO_DATA *)GKI_getbuf(sizeof(tBTA_HL_CI_ECHO_DATA))) != NULL)
+    {
+        p_evt->hdr.event = evt;
+        p_evt->mcl_handle =  mcl_handle;
+        p_evt->status = status;
+        bta_sys_sendmsg(p_evt);
+    }
+}
+
diff --git a/bta/hl/bta_hl_int.h b/bta/hl/bta_hl_int.h
new file mode 100644
index 0000000..648eb2c
--- /dev/null
+++ b/bta/hl/bta_hl_int.h
@@ -0,0 +1,858 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1998-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private file for the message access equipment (MSE)
+ *  subsystem.
+ *
+ ******************************************************************************/
+#ifndef BTA_HL_INT_H
+#define BTA_HL_INT_H
+
+#include "bt_target.h"
+#include "bta_sys.h"
+#include "obx_api.h"
+#include "bta_hl_api.h"
+#include "bta_hl_co.h"
+#include "l2cdefs.h"
+
+
+typedef UINT16 (tBTA_HL_ALLOCATE_PSM) (void);
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+#ifndef BTA_HL_DISC_SIZE
+#define BTA_HL_DISC_SIZE                1600
+#endif
+#define BTA_HL_NUM_SRCH_ATTR            10
+#define BTA_HL_MIN_SDP_MDEP_LEN         7
+
+/* L2CAP defualt parameters */
+#define BTA_HL_L2C_TX_WIN_SIZE          10
+#define BTA_HL_L2C_MAX_TRANSMIT         32
+#define BTA_HL_L2C_RTRANS_TOUT          2000
+#define BTA_HL_L2C_MON_TOUT             12000
+#define BTA_HL_L2C_MPS                  1017
+#define BTA_HL_L2C_USER_RX_POOL_ID      L2CAP_DEFAULT_ERM_POOL_ID
+#define BTA_HL_L2C_USER_TX_POOL_ID      L2CAP_DEFAULT_ERM_POOL_ID /* todo this should be based on data type */
+#define BTA_HL_L2C_FCR_RX_POOL_ID       L2CAP_DEFAULT_ERM_POOL_ID
+#define BTA_HL_L2C_FCR_TX_POOL_ID       L2CAP_DEFAULT_ERM_POOL_ID
+
+/* L2CAP FCS setting*/
+#define BTA_HL_MCA_USE_FCS              MCA_FCS_USE
+#define BTA_HL_MCA_NO_FCS               MCA_FCS_BYPASS
+#define BTA_HL_L2C_USE_FCS              1
+#define BTA_HL_L2C_NO_FCS               0
+#define BTA_HL_DEFAULT_SOURCE_FCS       BTA_HL_L2C_USE_FCS
+
+/* SDP Operations */
+#define BTA_HL_SDP_OP_NONE                  0
+#define BTA_HL_SDP_OP_CCH_INIT              1
+#define BTA_HL_SDP_OP_DCH_OPEN_INIT         2
+#define BTA_HL_SDP_OP_DCH_RECONNECT_INIT    3
+#define BTA_HL_SDP_OP_SDP_QUERY_NEW         4
+#define BTA_HL_SDP_OP_SDP_QUERY_CURRENT     5
+
+typedef UINT8 tBTA_HL_SDP_OPER;
+
+/* CCH Operations */
+#define     BTA_HL_CCH_OP_NONE            0
+#define     BTA_HL_CCH_OP_LOCAL_OPEN      1
+#define     BTA_HL_CCH_OP_REMOTE_OPEN     2
+#define     BTA_HL_CCH_OP_LOCAL_CLOSE     3
+#define     BTA_HL_CCH_OP_REMOTE_CLOSE    4
+
+typedef UINT8 tBTA_HL_CCH_OPER;
+
+/* Pending DCH close operations when closing a CCH */
+#define    BTA_HL_CCH_CLOSE_OP_DCH_NONE     0
+#define    BTA_HL_CCH_CLOSE_OP_DCH_ABORT    1
+#define    BTA_HL_CCH_CLOSE_OP_DCH_CLOSE    2
+typedef UINT8 tBTA_HL_CCH_CLOSE_DCH_OPER;
+
+/* DCH Operations */
+#define    BTA_HL_DCH_OP_NONE                    0
+#define    BTA_HL_DCH_OP_REMOTE_CREATE           1
+#define    BTA_HL_DCH_OP_LOCAL_OPEN              2
+#define    BTA_HL_DCH_OP_REMOTE_OPEN             3
+#define    BTA_HL_DCH_OP_LOCAL_CLOSE             4
+#define    BTA_HL_DCH_OP_REMOTE_CLOSE            5
+#define    BTA_HL_DCH_OP_LOCAL_DELETE            6
+#define    BTA_HL_DCH_OP_REMOTE_DELETE           7
+#define    BTA_HL_DCH_OP_LOCAL_RECONNECT         8
+#define    BTA_HL_DCH_OP_REMOTE_RECONNECT        9
+#define    BTA_HL_DCH_OP_LOCAL_CLOSE_ECHO_TEST   10
+#define    BTA_HL_DCH_OP_LOCAL_CLOSE_RECONNECT   11
+
+typedef UINT8 tBTA_HL_DCH_OPER;
+
+/* Echo test Operations */
+#define    BTA_HL_ECHO_OP_NONE                 0
+#define    BTA_HL_ECHO_OP_CI_GET_ECHO_DATA     1
+#define    BTA_HL_ECHO_OP_SDP_INIT             2
+#define    BTA_HL_ECHO_OP_MDL_CREATE_CFM       3
+#define    BTA_HL_ECHO_OP_DCH_OPEN_CFM         4
+#define    BTA_HL_ECHO_OP_LOOP_BACK            5
+#define    BTA_HL_ECHO_OP_CI_PUT_ECHO_DATA     6
+#define    BTA_HL_ECHO_OP_DCH_CLOSE_CFM        7
+#define    BTA_HL_ECHO_OP_OPEN_IND             8
+#define    BTA_HL_ECHO_OP_ECHO_PKT             9
+
+typedef UINT8 tBTA_HL_ECHO_OPER;
+
+/* abort status mask for abort_oper */
+
+#define BTA_HL_ABORT_NONE_MASK      0x00
+#define BTA_HL_ABORT_PENDING_MASK   0x01
+#define BTA_HL_ABORT_LOCAL_MASK     0x10
+#define BTA_HL_ABORT_REMOTE_MASK    0x20
+#define BTA_HL_ABORT_CCH_CLOSE_MASK 0x40
+
+/* call out mask for cout_oper */
+#define BTA_HL_CO_NONE_MASK          0x00
+#define BTA_HL_CO_GET_TX_DATA_MASK   0x01
+#define BTA_HL_CO_PUT_RX_DATA_MASK   0x02
+#define BTA_HL_CO_GET_ECHO_DATA_MASK 0x04
+#define BTA_HL_CO_PUT_ECHO_DATA_MASK 0x08
+
+typedef struct
+{
+    UINT16      mtu;
+    UINT8       fcs;                    /* '0' No FCS, otherwise '1' */
+} tBTA_HL_L2CAP_CFG_INFO;
+
+
+/* State Machine Events */
+enum
+{
+    /* these events are handled by the state machine */
+    BTA_HL_CCH_OPEN_EVT     = BTA_SYS_EVT_START(BTA_ID_HL),
+    BTA_HL_CCH_SDP_OK_EVT,
+    BTA_HL_CCH_SDP_FAIL_EVT,
+    BTA_HL_MCA_CONNECT_IND_EVT,
+    BTA_HL_MCA_DISCONNECT_IND_EVT,
+    BTA_HL_CCH_CLOSE_EVT,
+    BTA_HL_CCH_CLOSE_CMPL_EVT,
+    BTA_HL_MCA_RSP_TOUT_IND_EVT,
+    /* DCH EVENT */
+    BTA_HL_DCH_SDP_INIT_EVT,
+    BTA_HL_DCH_OPEN_EVT,
+    BTA_HL_MCA_CREATE_IND_EVT,
+    BTA_HL_MCA_CREATE_CFM_EVT,
+    BTA_HL_MCA_OPEN_IND_EVT,
+
+    BTA_HL_MCA_OPEN_CFM_EVT,
+    BTA_HL_DCH_CLOSE_EVT,
+    BTA_HL_MCA_CLOSE_IND_EVT,
+    BTA_HL_MCA_CLOSE_CFM_EVT,
+    BTA_HL_API_SEND_DATA_EVT,
+
+    BTA_HL_MCA_RCV_DATA_EVT,
+    BTA_HL_DCH_CLOSE_CMPL_EVT,
+    BTA_HL_DCH_RECONNECT_EVT,
+    BTA_HL_DCH_SDP_FAIL_EVT,
+    BTA_HL_MCA_RECONNECT_IND_EVT,
+
+    BTA_HL_MCA_RECONNECT_CFM_EVT,
+    BTA_HL_DCH_CLOSE_ECHO_TEST_EVT,
+    BTA_HL_API_DCH_CREATE_RSP_EVT,
+    BTA_HL_DCH_ABORT_EVT,
+    BTA_HL_MCA_ABORT_IND_EVT,
+
+    BTA_HL_MCA_ABORT_CFM_EVT,
+    BTA_HL_MCA_CONG_CHG_EVT,
+    BTA_HL_CI_GET_TX_DATA_EVT,
+    BTA_HL_CI_PUT_RX_DATA_EVT,
+    BTA_HL_CI_GET_ECHO_DATA_EVT,
+    BTA_HL_DCH_ECHO_TEST_EVT,
+    BTA_HL_CI_PUT_ECHO_DATA_EVT,
+
+    /* these events are handled outside the state machine */
+    BTA_HL_API_ENABLE_EVT,
+    BTA_HL_API_DISABLE_EVT,
+    BTA_HL_API_REGISTER_EVT,
+    BTA_HL_API_DEREGISTER_EVT,
+    BTA_HL_API_CCH_OPEN_EVT,
+    BTA_HL_API_CCH_CLOSE_EVT,
+    BTA_HL_API_DCH_OPEN_EVT,
+    BTA_HL_API_DCH_RECONNECT_EVT,
+    BTA_HL_API_DCH_CLOSE_EVT,
+    BTA_HL_API_DELETE_MDL_EVT,
+    BTA_HL_API_DCH_ABORT_EVT,
+
+    BTA_HL_API_DCH_ECHO_TEST_EVT,
+    BTA_HL_API_SDP_QUERY_EVT,
+    BTA_HL_SDP_QUERY_OK_EVT,
+    BTA_HL_SDP_QUERY_FAIL_EVT,
+    BTA_HL_MCA_DELETE_IND_EVT,
+    BTA_HL_MCA_DELETE_CFM_EVT
+};
+typedef UINT16 tBTA_HL_INT_EVT;
+
+#define BTA_HL_DCH_EVT_MIN BTA_HL_DCH_SDP_INIT_EVT
+#define BTA_HL_DCH_EVT_MAX 0xFFFF
+
+
+/* state machine states */
+enum
+{
+    BTA_HL_CCH_IDLE_ST = 0,      /* Idle  */
+    BTA_HL_CCH_OPENING_ST,       /* Opening a connection*/
+    BTA_HL_CCH_OPEN_ST,          /* Connection is open */
+    BTA_HL_CCH_CLOSING_ST        /* Closing is in progress */
+};
+typedef UINT8 tBTA_HL_CCH_STATE;
+
+enum
+{
+    BTA_HL_DCH_IDLE_ST = 0,      /* Idle  */
+    BTA_HL_DCH_OPENING_ST,       /* Opening a connection*/
+    BTA_HL_DCH_OPEN_ST,          /* Connection is open */
+    BTA_HL_DCH_CLOSING_ST        /* Closing is in progress */
+};
+typedef UINT8 tBTA_HL_DCH_STATE;
+
+
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_HL_CTRL_CBACK  *p_cback;        /* pointer to control callback function */
+} tBTA_HL_API_ENABLE;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT8               app_id;
+    tBTA_HL_CBACK       *p_cback;        /* pointer to application callback function */
+    tBTA_HL_DEVICE_TYPE dev_type;           /* sink, source or dual roles */
+    tBTA_SEC            sec_mask;           /* security mask for accepting conenction*/
+    char                srv_name[BTA_SERVICE_NAME_LEN +1];        /* service name to be used in the SDP; null terminated*/
+    char                srv_desp[BTA_SERVICE_DESP_LEN +1];        /* service description to be used in the SDP; null terminated */
+    char                provider_name[BTA_PROVIDER_NAME_LEN +1];   /* provide name to be used in the SDP; null terminated */
+} tBTA_HL_API_REGISTER;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_API_DEREGISTER;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_APP_HANDLE      app_handle;
+    UINT16                  ctrl_psm;
+    BD_ADDR                 bd_addr;        /* Address of peer device */
+    tBTA_SEC                sec_mask;       /* security mask for initiating connection*/
+} tBTA_HL_API_CCH_OPEN;
+
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+} tBTA_HL_API_CCH_CLOSE;
+
+
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    UINT16                  ctrl_psm;
+    tBTA_HL_MDEP_ID         local_mdep_id;     /* local MDEP ID */
+    tBTA_HL_MDEP_ID         peer_mdep_id;      /* peer mdep id */
+    tBTA_HL_DCH_CFG         local_cfg;
+    tBTA_SEC                sec_mask;          /* security mask for initiating connection*/
+} tBTA_HL_API_DCH_OPEN;
+
+
+typedef struct
+{
+    BT_HDR                  hdr;
+
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    UINT16                  ctrl_psm;
+    tBTA_HL_MDL_ID          mdl_id;
+} tBTA_HL_API_DCH_RECONNECT;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+} tBTA_HL_API_DCH_CLOSE;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_MDL_ID          mdl_id;
+} tBTA_HL_API_DELETE_MDL;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_HL_MCL_HANDLE mcl_handle;
+} tBTA_HL_API_DCH_ABORT;
+
+
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_HL_MDL_HANDLE  mdl_handle;
+    UINT16              pkt_size;
+} tBTA_HL_API_SEND_DATA;
+
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_HL_MCL_HANDLE  mcl_handle;
+    UINT16              ctrl_psm;
+    UINT16              pkt_size;
+    tBTA_HL_DCH_CFG     local_cfg;
+} tBTA_HL_API_DCH_ECHO_TEST;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    UINT8                   app_idx;
+    UINT8                   mcl_idx;
+    BOOLEAN                 release_mcl_cb;
+}tBTA_HL_CCH_SDP;
+
+
+/* MCA callback event parameters. */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_HL_APP_HANDLE  app_handle;
+    tBTA_HL_MCL_HANDLE  mcl_handle;
+    tMCA_CTRL       mca_data;
+} tBTA_HL_MCA_EVT;
+
+
+/* MCA callback event parameters. */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT8           app_idx;
+    UINT8           mcl_idx;
+    UINT8           mdl_idx;
+    BT_HDR          *p_pkt;
+} tBTA_HL_MCA_RCV_DATA_EVT;
+
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    UINT8                   app_idx;
+    UINT8                   mcl_idx;
+    UINT8                   mdl_idx;
+}tBTA_HL_DCH_SDP;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_APP_HANDLE      app_handle;
+    BD_ADDR                 bd_addr;        /* Address of peer device */
+} tBTA_HL_API_SDP_QUERY;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_MDL_ID          mdl_id;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    tBTA_HL_DCH_CREATE_RSP  rsp_code;
+    tBTA_HL_DCH_CFG         cfg_rsp;
+} tBTA_HL_API_DCH_CREATE_RSP;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_STATUS          status;
+} tBTA_HL_CI_GET_PUT_DATA;
+
+typedef struct
+{
+    BT_HDR                  hdr;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_STATUS          status;
+} tBTA_HL_CI_ECHO_DATA;
+
+/* union of all state machine event data types */
+typedef union
+{
+    BT_HDR                      hdr;
+    tBTA_HL_API_ENABLE          api_enable; /* data for BTA_MSE_API_ENABLE_EVT */
+    tBTA_HL_API_REGISTER        api_reg;
+    tBTA_HL_API_DEREGISTER      api_dereg;
+    tBTA_HL_API_CCH_OPEN        api_cch_open;
+    tBTA_HL_API_CCH_CLOSE       api_cch_close;
+    tBTA_HL_API_DCH_CREATE_RSP  api_dch_create_rsp;
+    tBTA_HL_API_DCH_OPEN        api_dch_open;
+    tBTA_HL_API_DCH_RECONNECT   api_dch_reconnect;
+    tBTA_HL_API_DCH_CLOSE       api_dch_close;
+    tBTA_HL_API_DELETE_MDL      api_delete_mdl;
+    tBTA_HL_API_DCH_ABORT       api_dch_abort;
+    tBTA_HL_API_SEND_DATA       api_send_data;
+    tBTA_HL_API_DCH_ECHO_TEST   api_dch_echo_test;
+    tBTA_HL_API_SDP_QUERY       api_sdp_query;
+
+    tBTA_HL_CCH_SDP             cch_sdp;
+    tBTA_HL_MCA_EVT             mca_evt;
+    tBTA_HL_MCA_RCV_DATA_EVT    mca_rcv_data_evt;
+    tBTA_HL_DCH_SDP             dch_sdp; /* for DCH_OPEN_EVT and DCH_RECONNECT_EVT */
+    tBTA_HL_CI_GET_PUT_DATA     ci_get_put_data;
+    tBTA_HL_CI_ECHO_DATA        ci_get_put_echo_data;
+} tBTA_HL_DATA;
+
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    UINT16                  mdl_id;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_DCH_OPER        dch_oper;
+    BOOLEAN                 intentional_close;
+    tBTA_HL_DCH_STATE       dch_state;
+    UINT8                   abort_oper;
+    UINT16                  req_data_psm;
+    UINT16                  max_rx_apdu_size;
+    UINT16                  max_tx_apdu_size;
+    BT_HDR                  *p_tx_pkt;
+    BT_HDR                  *p_rx_pkt;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    UINT8                   local_mdep_cfg_idx;
+    tBTA_HL_DCH_CFG         local_cfg;
+    tBTA_HL_DCH_CFG         remote_cfg;
+    tBTA_HL_MDEP_ID         peer_mdep_id;
+    UINT16  peer_data_type;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+    tBTA_HL_DCH_MODE        dch_mode;
+    tBTA_SEC                sec_mask;
+    BOOLEAN                 is_the_first_reliable;
+    BOOLEAN                 delete_mdl;
+    UINT16                  mtu;
+    tMCA_CHNL_CFG           chnl_cfg;
+    BOOLEAN                 mdl_cfg_idx_included;
+    UINT8                   mdl_cfg_idx;
+    UINT8                   echo_oper;
+    BOOLEAN                 cong;
+    BOOLEAN                 close_pending;
+    UINT8                   cout_oper;
+    BT_HDR                  *p_echo_tx_pkt;
+    BT_HDR                  *p_echo_rx_pkt;
+    tBTA_HL_STATUS          ci_put_echo_data_status;
+}tBTA_HL_MDL_CB;
+
+typedef struct
+{
+    tBTA_HL_MDL_CB          mdl[BTA_HL_NUM_MDLS_PER_MCL];
+    tBTA_HL_DELETE_MDL      delete_mdl;
+    BOOLEAN                 in_use;
+    tBTA_HL_CCH_STATE       cch_state;
+    UINT16                  req_ctrl_psm;
+    UINT16                  ctrl_psm;
+    UINT16                  data_psm;
+    BD_ADDR                 bd_addr;
+    UINT16                  cch_mtu;
+    UINT16                  sec_mask;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tSDP_DISCOVERY_DB       *p_db;         /* pointer to discovery database */
+    tSDP_DISC_CMPL_CB       *sdp_cback;
+    tBTA_HL_SDP_OPER        sdp_oper;
+    BOOLEAN                 close_pending;
+    UINT8                   sdp_mdl_idx;
+    tBTA_HL_SDP             sdp;
+    UINT8                   cch_oper;
+    BOOLEAN                 intentional_close;
+    BOOLEAN                 rsp_tout;
+    UINT8                   timer_oper;
+    BOOLEAN                 echo_test;
+    UINT8                   echo_mdl_idx;
+    UINT8                   cch_close_dch_oper;
+}tBTA_HL_MCL_CB;
+
+typedef struct
+{
+    tBTA_HL_MCL_CB       mcb[BTA_HL_NUM_MCLS]; /* application Control Blocks */
+    tBTA_HL_CBACK        *p_cback;            /* pointer to control callback function */
+    BOOLEAN              in_use;              /* this CB is in use*/
+    BOOLEAN              deregistering;
+    UINT8                app_id;
+    UINT32               sdp_handle;    /* SDP record handle */
+    tBTA_HL_SUP_FEATURE  sup_feature;
+    tBTA_HL_MDL_CFG      mdl_cfg[BTA_HL_NUM_MDL_CFGS];
+    tBTA_HL_DEVICE_TYPE  dev_type;
+    tBTA_HL_APP_HANDLE   app_handle;
+    UINT16               ctrl_psm;   /* L2CAP PSM for the MCAP control channel */
+    UINT16               data_psm;   /* L2CAP PSM for the MCAP data channel */
+    UINT16               sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
+
+    char                 srv_name[BTA_SERVICE_NAME_LEN +1];        /* service name to be used in the SDP; null terminated*/
+    char                 srv_desp[BTA_SERVICE_DESP_LEN +1];        /* service description to be used in the SDP; null terminated */
+    char                 provider_name[BTA_PROVIDER_NAME_LEN +1];   /* provide name to be used in the SDP; null terminated */
+
+    tMCA_CTRL_CBACK      *p_mcap_cback;            /* pointer to MCAP callback function */
+    tMCA_DATA_CBACK      *p_data_cback;
+}tBTA_HL_APP_CB;
+
+
+typedef struct
+{
+    BOOLEAN             in_use;
+    tBTA_HL_SDP_OPER    sdp_oper;
+    UINT8               app_idx;
+    UINT8               mcl_idx;
+    UINT8               mdl_idx;
+}tBTA_HL_SDP_CB;
+
+typedef struct
+{
+    BOOLEAN         in_use;
+    UINT8           app_idx;
+    UINT8           mcl_idx;
+}tBTA_HL_TIMER_CB;
+
+typedef struct
+{
+    tBTA_HL_APP_CB        acb[BTA_HL_NUM_APPS];      /* HL Control Blocks */
+    tBTA_HL_CTRL_CBACK    *p_ctrl_cback;            /* pointer to control callback function */
+    BOOLEAN               enable;
+    BOOLEAN               disabling;
+
+    tBTA_HL_SDP_CB        scb[BTA_HL_NUM_SDP_CBACKS];
+    tBTA_HL_TIMER_CB      tcb[BTA_HL_NUM_TIMERS];
+    BOOLEAN               enable_random_psm;
+    tBTA_HL_ALLOCATE_PSM  *p_alloc_psm;
+}tBTA_HL_CB;
+
+/******************************************************************************
+**  Configuration Definitions
+*******************************************************************************/
+/* Configuration structure */
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* HL control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_HL_CB  bta_hl_cb;
+#else
+extern tBTA_HL_CB *bta_hl_cb_ptr;
+    #define bta_hl_cb (*bta_hl_cb_ptr)
+#endif
+
+#define BTA_HL_GET_CB_PTR() &(bta_hl_cb)
+#define BTA_HL_GET_APP_CB_PTR(app_idx) &(bta_hl_cb.acb[(app_idx)])
+#define BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx) &(bta_hl_cb.acb[(app_idx)].mcb[(mcl_idx)])
+#define BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx) &(bta_hl_cb.acb[(app_idx)].mcb[(mcl_idx)].mdl[mdl_idx])
+#define BTA_HL_GET_MDL_CFG_PTR(app_idx, item_idx) &(bta_hl_cb.acb[(app_idx)].mdl_cfg[(item_idx)])
+#define BTA_HL_GET_ECHO_CFG_PTR(app_idx)  &(bta_hl_cb.acb[(app_idx)].sup_feature.echo_cfg)
+#define BTA_HL_GET_MDEP_CFG_PTR(app_idx, mdep_cfg_idx)  &(bta_hl_cb.acb[(app_idx)].sup_feature.mdep[mdep_cfg_idx].mdep_cfg)
+#define BTA_HL_GET_DATA_CFG_PTR(app_idx, mdep_cfg_idx, data_cfg_idx)  \
+           &(bta_hl_cb.acb[(app_idx)].sup_feature.mdep[mdep_cfg_idx].mdep_cfg.data_cfg[data_cfg_idx])
+#define BTA_HL_GET_BUF_PTR(p_pkt) ((UINT8 *)((UINT8 *) (p_pkt+1) + p_pkt->offset))
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+    /* main */
+    extern BOOLEAN bta_hl_hdl_event(BT_HDR *p_msg);
+    /* sdp */
+    extern BOOLEAN bta_hl_fill_sup_feature_list( const tSDP_DISC_ATTR  *p_attr,
+                                                 tBTA_HL_SUP_FEATURE_LIST_ELEM *p_list);
+
+    extern tBTA_HL_STATUS bta_hl_sdp_register (UINT8 app_idx);
+    extern tSDP_DISC_REC *bta_hl_find_sink_or_src_srv_class_in_db (const tSDP_DISCOVERY_DB *p_db,
+                                                                   const tSDP_DISC_REC *p_start_rec);
+
+    /* action routines */
+    extern void bta_hl_dch_ci_get_tx_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_ci_put_rx_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_ci_get_echo_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                            tBTA_HL_DATA *p_data);
+
+    extern void bta_hl_dch_echo_test(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                     tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_ci_put_echo_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                            tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_send_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                     tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_sdp_fail(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                    tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_cong_change(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                           tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_reconnect_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                             tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_reconnect_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                             tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_reconnect(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                         tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_sdp_init(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                    tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_close_echo_test(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                           tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_create_rsp(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                      tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_rcv_data(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                        tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_close_cmpl(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                      tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_close_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                         tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_close_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                         tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_close(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                     tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_delete_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+
+    extern void bta_hl_dch_mca_delete_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_delete(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                      tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_abort_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                         tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_abort_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                         tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_abort(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                     tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_open_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                        tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_open_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                        tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_create_ind(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_create_cfm(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                          tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_mca_create(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                      tBTA_HL_DATA *p_data);
+    extern void bta_hl_deallocate_spd_cback(UINT8 sdp_cback_idx);
+    extern tSDP_DISC_CMPL_CB *bta_hl_allocate_spd_cback(tBTA_HL_SDP_OPER sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                                                        UINT8 mdl_idx,
+                                                        UINT8 *p_sdp_cback_idx);
+    extern tBTA_HL_STATUS bta_hl_init_sdp(tBTA_HL_SDP_OPER sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                                          UINT8 mdl_idx);
+    extern void bta_hl_cch_sdp_init(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_mca_open(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_mca_close(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_close_cmpl(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_mca_disconnect(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_mca_rsp_tout(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+    extern void bta_hl_cch_mca_connect(UINT8 app_idx, UINT8 mcl_idx,  tBTA_HL_DATA *p_data);
+
+    /* State machine drivers  */
+    extern void bta_hl_cch_sm_execute(UINT8 inst_idx, UINT8 mcl_idx,
+                                      UINT16 event, tBTA_HL_DATA *p_data);
+    extern void bta_hl_dch_sm_execute(UINT8 inst_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                      UINT16 event, tBTA_HL_DATA *p_data);
+    /* MCAP callback functions  */
+    extern void bta_hl_mcap_ctrl_cback(tMCA_HANDLE handle, tMCA_CL mcl, UINT8 event,
+                                       tMCA_CTRL *p_data);
+
+    extern void bta_hl_mcap_data_cback(tMCA_DL mdl, BT_HDR *p_pkt);
+
+    /* utility functions  */
+    extern BOOLEAN bta_hl_set_ctrl_psm_for_dch(UINT8 app_idx, UINT8 mcl_idx,
+                                               UINT8 mdl_idx, UINT16 ctrl_psm);
+    extern BOOLEAN bta_hl_find_sdp_idx_using_ctrl_psm(tBTA_HL_SDP *p_sdp,
+                                                      UINT16 ctrl_psm,
+                                                      UINT8 *p_sdp_idx);
+    extern UINT8 bta_hl_set_user_tx_pool_id(UINT16 max_tx_size);
+    extern UINT8 bta_hl_set_user_rx_pool_id(UINT16 mtu);
+    extern UINT8 bta_hl_set_tx_win_size(UINT16 mtu, UINT16 mps);
+    extern UINT16 bta_hl_set_mps(UINT16 mtu);
+    extern void bta_hl_clean_mdl_cb(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx);
+    extern BT_HDR * bta_hl_get_buf(UINT16 data_size);
+    extern BOOLEAN bta_hl_find_service_in_db( UINT8 app_idx, UINT8 mcl_idx,
+                                              UINT16 service_uuid,
+                                              tSDP_DISC_REC **pp_rec );
+    extern UINT16 bta_hl_get_service_uuids(UINT8 sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                                           UINT8 mdl_idx );
+    extern BOOLEAN bta_hl_find_echo_cfg_rsp(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdep_idx, UINT8 cfg,
+                                            UINT8 *p_cfg_rsp);
+    extern BOOLEAN bta_hl_validate_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                       UINT8 cfg);
+    extern BOOLEAN bta_hl_find_cch_cb_indexes(tBTA_HL_DATA *p_msg,
+                                              UINT8 *p_app_idx,
+                                              UINT8  *p_mcl_idx);
+    extern BOOLEAN bta_hl_find_dch_cb_indexes(tBTA_HL_DATA *p_msg,
+                                              UINT8 *p_app_idx,
+                                              UINT8 *p_mcl_idx,
+                                              UINT8 *p_mdl_idx);
+    extern UINT16  bta_hl_allocate_mdl_id(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx );
+    extern BOOLEAN bta_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle,
+                                                    UINT8 *p_app_idx, UINT8 *p_mcl_idx,
+                                                    UINT8 *p_mdl_idx);
+    extern BOOLEAN bta_hl_find_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, UINT16 mdl_id,
+                                       UINT8 *p_mdl_idx);
+    extern BOOLEAN bta_hl_find_an_active_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                                 UINT8 *p_mdl_idx);
+    extern BOOLEAN bta_hl_find_dch_setup_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                                 UINT8 *p_mdl_idx);
+    extern BOOLEAN bta_hl_find_an_in_use_mcl_idx(UINT8 app_idx,
+                                                 UINT8 *p_mcl_idx);
+    extern BOOLEAN bta_hl_find_an_in_use_app_idx(UINT8 *p_app_idx);
+    extern BOOLEAN bta_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx);
+    extern BOOLEAN bta_hl_find_app_idx_using_handle(tBTA_HL_APP_HANDLE app_handle,
+                                                    UINT8 *p_app_idx);
+    extern BOOLEAN bta_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle,
+                                                     UINT8 *p_app_idx, UINT8 *p_mcl_idx);
+    extern BOOLEAN bta_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx);
+    extern BOOLEAN bta_hl_is_the_first_reliable_existed(UINT8 app_idx, UINT8 mcl_idx );
+    extern BOOLEAN  bta_hl_find_non_active_mdl_cfg(UINT8 app_idx, UINT8 start_mdl_cfg_idx,
+                                                   UINT8 *p_mdl_cfg_idx);
+    extern BOOLEAN  bta_hl_find_avail_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                                  UINT8 *p_mdl_cfg_idx);
+    extern BOOLEAN  bta_hl_find_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                            tBTA_HL_MDL_ID mdl_id, UINT8 *p_mdl_cfg_idx);
+    extern BOOLEAN  bta_hl_get_cur_time(UINT8 app_idx, UINT8 *p_cur_time);
+    extern void bta_hl_sort_cfg_time_idx(UINT8 app_idx, UINT8 *a, UINT8 n);
+    extern void  bta_hl_compact_mdl_cfg_time(UINT8 app_idx);
+    extern BOOLEAN  bta_hl_is_mdl_exsit_in_mcl(UINT8 app_idx, BD_ADDR bd_addr,
+                                               tBTA_HL_MDL_ID mdl_id);
+    extern BOOLEAN  bta_hl_delete_mdl_cfg(UINT8 app_idx, BD_ADDR bd_addr,
+                                          tBTA_HL_MDL_ID mdl_id);
+    extern BOOLEAN  bta_hl_is_mdl_value_valid(tBTA_HL_MDL_ID mdl_id);
+    extern BOOLEAN bta_hl_find_mdep_cfg_idx(UINT8 app_idx,
+                                            tBTA_HL_MDEP_ID local_mdep_id, UINT8 *p_mdep_cfg_idx);
+    extern void bta_hl_find_rxtx_apdu_size(UINT8 app_idx, UINT8 mdep_cfg_idx,
+                                           UINT16 *p_rx_apu_size,
+                                           UINT16 *p_tx_apu_size);
+    extern BOOLEAN bta_hl_validate_peer_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                            tBTA_HL_MDEP_ID peer_mdep_id,
+                                            tBTA_HL_MDEP_ROLE peer_mdep_role,
+                                            UINT8 sdp_idx);
+    extern tBTA_HL_STATUS bta_hl_chk_local_cfg(UINT8 app_idx, UINT8 mcl_idx,
+                                               UINT8 mdep_cfg_idx,
+                                               tBTA_HL_DCH_CFG local_cfg);
+
+    extern BOOLEAN bta_hl_validate_reconnect_params(UINT8 app_idx, UINT8 mcl_idx,
+                                                    tBTA_HL_API_DCH_RECONNECT *p_reconnect,
+                                                    UINT8 *p_mdep_cfg_idx, UINT8 *p_mdl_cfg_idx);
+    extern BOOLEAN bta_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx);
+    extern BOOLEAN bta_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                             UINT8 *p_mdl_idx);
+    extern BOOLEAN bta_hl_is_a_duplicate_id(UINT8 app_id);
+    extern BOOLEAN bta_hl_find_avail_app_idx(UINT8 *p_idx);
+    extern tBTA_HL_STATUS bta_hl_app_registration(UINT8 app_idx);
+    extern void bta_hl_discard_data(UINT16 event, tBTA_HL_DATA *p_data);
+    extern void bta_hl_save_mdl_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx );
+    extern void bta_hl_set_dch_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx, tBTA_HL_DATA *p_data);
+    extern BOOLEAN bta_hl_get_l2cap_cfg(tBTA_HL_MDL_HANDLE mdl_hnd, tBTA_HL_L2CAP_CFG_INFO *p_cfg);
+    extern BOOLEAN bta_hl_validate_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx);
+    extern BOOLEAN bta_hl_is_cong_on(UINT8 app_id, BD_ADDR bd_addr, tBTA_HL_MDL_ID mdl_id);
+    extern void bta_hl_check_cch_close(UINT8 app_idx, UINT8 mcl_idx,
+                                       tBTA_HL_DATA *p_data, BOOLEAN check_dch_setup);
+    extern void bta_hl_clean_app(UINT8 app_idx);
+    extern void bta_hl_check_deregistration(UINT8 app_idx, tBTA_HL_DATA *p_data );
+    extern void bta_hl_check_disable(tBTA_HL_DATA *p_data );
+    extern void  bta_hl_build_abort_ind(tBTA_HL *p_evt_data,
+                                        tBTA_HL_APP_HANDLE app_handle,
+                                        tBTA_HL_MCL_HANDLE mcl_handle);
+    extern void  bta_hl_build_abort_cfm(tBTA_HL *p_evt_data,
+                                        tBTA_HL_APP_HANDLE app_handle,
+                                        tBTA_HL_MCL_HANDLE mcl_handle,
+                                        tBTA_HL_STATUS status);
+    extern void  bta_hl_build_dch_close_cfm(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_MDL_HANDLE mdl_handle,
+                                            tBTA_HL_STATUS status);
+    extern void  bta_hl_build_dch_close_ind(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_MDL_HANDLE mdl_handle,
+                                            BOOLEAN intentional);
+    extern void  bta_hl_build_send_data_cfm(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_MDL_HANDLE mdl_handle,
+                                            tBTA_HL_STATUS status );
+    extern void  bta_hl_build_rcv_data_ind(tBTA_HL *p_evt_data,
+                                           tBTA_HL_APP_HANDLE app_handle,
+                                           tBTA_HL_MCL_HANDLE mcl_handle,
+                                           tBTA_HL_MDL_HANDLE mdl_handle);
+    extern void  bta_hl_build_cch_open_cfm(tBTA_HL *p_evt_data,
+                                           tBTA_HL_APP_HANDLE app_handle,
+                                           tBTA_HL_MCL_HANDLE mcl_handle,
+                                           BD_ADDR bd_addr,
+                                           tBTA_HL_STATUS status );
+    extern void  bta_hl_build_cch_open_ind(tBTA_HL *p_evt_data,
+                                           tBTA_HL_APP_HANDLE app_handle,
+                                           tBTA_HL_MCL_HANDLE mcl_handle,
+                                           BD_ADDR bd_addr);
+    extern void  bta_hl_build_cch_close_cfm(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_STATUS status );
+    extern void   bta_hl_build_cch_close_ind(tBTA_HL *p_evt_data,
+                                             tBTA_HL_APP_HANDLE app_handle,
+                                             tBTA_HL_MCL_HANDLE mcl_handle,
+                                             BOOLEAN intentional);
+
+    extern void  bta_hl_build_dch_open_cfm(tBTA_HL *p_evt_data,
+                                           tBTA_HL_APP_HANDLE app_handle,
+                                           tBTA_HL_MCL_HANDLE mcl_handle,
+                                           tBTA_HL_MDL_HANDLE mdl_handle,
+                                           tBTA_HL_MDEP_ID local_mdep_id,
+                                           tBTA_HL_MDL_ID mdl_id,
+                                           tBTA_HL_DCH_MODE dch_mode,
+                                           BOOLEAN first_reliable,
+                                           UINT16 mtu,
+                                           tBTA_HL_STATUS status);
+
+    extern void  bta_hl_build_delete_mdl_cfm(tBTA_HL *p_evt_data,
+                                             tBTA_HL_APP_HANDLE app_handle,
+                                             tBTA_HL_MCL_HANDLE mcl_handle,
+                                             tBTA_HL_MDL_ID mdl_id,
+                                             tBTA_HL_STATUS status);
+    extern void  bta_hl_build_echo_test_cfm(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_STATUS status );
+    extern void  bta_hl_build_sdp_query_cfm(tBTA_HL *p_evt_data,
+                                            tBTA_HL_APP_HANDLE app_handle,
+                                            BD_ADDR bd_addr,
+                                            tBTA_HL_SDP *p_sdp,
+                                            tBTA_HL_STATUS status);
+
+#if (BTA_HL_DEBUG == TRUE)
+    extern  char *bta_hl_status_code(tBTA_HL_STATUS status);
+    extern char *bta_hl_evt_code(tBTA_HL_INT_EVT evt_code);
+#endif
+#ifdef __cplusplus
+}
+#endif
+#endif /* BTA_MSE_INT_H */
+
+
diff --git a/bta/hl/bta_hl_main.c b/bta/hl/bta_hl_main.c
new file mode 100644
index 0000000..afac4c3
--- /dev/null
+++ b/bta/hl/bta_hl_main.c
@@ -0,0 +1,1920 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1998-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HeaLth device profile main functions and state
+ *  machine.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE)
+
+
+
+#include "bta_hl_api.h"
+#include "bta_hl_int.h"
+#include "gki.h"
+#include "utl.h"
+#include "bd.h"
+#include "l2c_api.h"
+#include "mca_defs.h"
+
+
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+static char *bta_hl_cch_state_code(tBTA_HL_CCH_STATE state_code);
+static char *bta_hl_dch_state_code(tBTA_HL_DCH_STATE state_code);
+#endif
+
+extern UINT16 L2CA_AllocateRandomPsm(void);
+extern UINT16 L2CA_AllocatePsm(void);
+/*****************************************************************************
+** DCH State Table
+*****************************************************************************/
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+/* state machine action enumeration list for DCH */
+/* The order of this enumeration must be the same as bta_hl_dch_act_tbl[] */
+enum
+{
+    BTA_HL_DCH_MCA_CREATE,
+    BTA_HL_DCH_MCA_CREATE_CFM,
+    BTA_HL_DCH_MCA_CREATE_IND,
+    BTA_HL_DCH_MCA_OPEN_CFM,
+    BTA_HL_DCH_MCA_OPEN_IND,
+    BTA_HL_DCH_MCA_CLOSE,
+    BTA_HL_DCH_MCA_CLOSE_CFM,
+    BTA_HL_DCH_MCA_CLOSE_IND,
+    BTA_HL_DCH_CLOSE_CMPL,
+    BTA_HL_DCH_MCA_RCV_DATA,
+
+    BTA_HL_DCH_SDP_INIT,
+    BTA_HL_DCH_MCA_RECONNECT,
+    BTA_HL_DCH_MCA_RECONNECT_IND,
+    BTA_HL_DCH_MCA_RECONNECT_CFM,
+    BTA_HL_DCH_CLOSE_ECHO_TEST,
+    BTA_HL_DCH_CREATE_RSP,
+    BTA_HL_DCH_MCA_ABORT,
+    BTA_HL_DCH_MCA_ABORT_IND,
+    BTA_HL_DCH_MCA_ABORT_CFM,
+    BTA_HL_DCH_MCA_CONG_CHANGE,
+
+    BTA_HL_DCH_SDP_FAIL,
+    BTA_HL_DCH_SEND_DATA,
+    BTA_HL_DCH_CI_GET_TX_DATA,
+    BTA_HL_DCH_CI_PUT_RX_DATA,
+    BTA_HL_DCH_CI_GET_ECHO_DATA,
+    BTA_HL_DCH_ECHO_TEST,
+    BTA_HL_DCH_CI_PUT_ECHO_DATA,
+    BTA_HL_DCH_IGNORE
+};
+
+typedef void (*tBTA_HL_DCH_ACTION)(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx, tBTA_HL_DATA *p_data);
+
+static const tBTA_HL_DCH_ACTION bta_hl_dch_action[] =
+{
+    bta_hl_dch_mca_create,
+    bta_hl_dch_mca_create_cfm,
+    bta_hl_dch_mca_create_ind,
+    bta_hl_dch_mca_open_cfm,
+    bta_hl_dch_mca_open_ind,
+    bta_hl_dch_mca_close,
+    bta_hl_dch_mca_close_cfm,
+    bta_hl_dch_mca_close_ind,
+    bta_hl_dch_close_cmpl,
+    bta_hl_dch_mca_rcv_data,
+
+    bta_hl_dch_sdp_init,
+    bta_hl_dch_mca_reconnect,
+    bta_hl_dch_mca_reconnect_ind,
+    bta_hl_dch_mca_reconnect_cfm,
+    bta_hl_dch_close_echo_test,
+    bta_hl_dch_create_rsp,
+    bta_hl_dch_mca_abort,
+    bta_hl_dch_mca_abort_ind,
+    bta_hl_dch_mca_abort_cfm,
+    bta_hl_dch_mca_cong_change,
+
+    bta_hl_dch_sdp_fail,
+    bta_hl_dch_send_data,
+    bta_hl_dch_ci_get_tx_data,
+    bta_hl_dch_ci_put_rx_data,
+    bta_hl_dch_ci_get_echo_data,
+    bta_hl_dch_echo_test,
+    bta_hl_dch_ci_put_echo_data,
+};
+
+
+/* state table information */
+#define BTA_HL_DCH_ACTIONS             1       /* number of actions */
+#define BTA_HL_DCH_ACTION_COL          0       /* position of action */
+#define BTA_HL_DCH_NEXT_STATE          1       /* position of next state */
+#define BTA_HL_DCH_NUM_COLS            2       /* number of columns in state tables */
+
+/* state table for idle state */
+static const UINT8 bta_hl_dch_st_idle[][BTA_HL_DCH_NUM_COLS] =
+{
+/* Event                                Action 1                    Next state */
+/* BTA_HL_DCH_SDP_INIT_EVT   */     {BTA_HL_DCH_SDP_INIT,           BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_OPEN_EVT       */     {BTA_HL_DCH_MCA_CREATE,         BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CREATE_IND_EVT */     {BTA_HL_DCH_MCA_CREATE_IND,     BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CREATE_CFM_EVT */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_OPEN_IND_EVT   */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+
+/* BTA_HL_MCA_OPEN_CFM_EVT   */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_CLOSE_EVT      */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_CLOSE_IND_EVT  */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_CLOSE_CFM_EVT  */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_API_SEND_DATA_EVT  */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+
+/* BTA_HL_MCA_RCV_DATA_EVT   */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_CLOSE_CMPL_EVT */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_RECONNECT_EVT  */     {BTA_HL_DCH_MCA_RECONNECT,      BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_SDP_FAIL_EVT   */     {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_RECONNECT_IND_EVT*/   {BTA_HL_DCH_MCA_RECONNECT_IND,  BTA_HL_DCH_OPENING_ST},
+
+/* BTA_HL_MCA_RECONNECT_CFM_EVT*/   {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_CLOSE_ECHO_TEST_EVT*/ {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_API_DCH_CREATE_RSP_EVT */ {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_ABORT_EVT */          {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_ABORT_IND_EVT */      {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+
+/* BTA_HL_MCA_ABORT_CFM_EVT */      {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_CONG_CHG_EVT */       {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_CI_GET_TX_DATA_EVT  */    {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_CI_PUT_RX_DATA_EVT  */    {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_CI_GET_ECHO_DATA_EVT  */  {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_ECHO_TEST_EVT  */     {BTA_HL_DCH_ECHO_TEST,          BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_CI_PUT_ECHO_DATA_EVT  */  {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_IDLE_ST}
+};
+
+/* state table for opening state */
+static const UINT8 bta_hl_dch_st_opening[][BTA_HL_DCH_NUM_COLS] =
+{
+/* Event                                Action 1                    Next state */
+/* BTA_HL_DCH_SDP_INIT_EVT   */   {BTA_HL_DCH_SDP_INIT,             BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_OPEN_EVT       */   {BTA_HL_DCH_MCA_CREATE,           BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CREATE_IND_EVT */   {BTA_HL_DCH_IGNORE,               BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CREATE_CFM_EVT */   {BTA_HL_DCH_MCA_CREATE_CFM,       BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_OPEN_IND_EVT   */   {BTA_HL_DCH_MCA_OPEN_IND,         BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_OPEN_CFM_EVT   */   {BTA_HL_DCH_MCA_OPEN_CFM,         BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_CLOSE_EVT      */   {BTA_HL_DCH_IGNORE,               BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CLOSE_IND_EVT  */   {BTA_HL_DCH_MCA_CLOSE_IND,        BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CLOSE_CFM_EVT  */   {BTA_HL_DCH_MCA_CLOSE_CFM,        BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_API_SEND_DATA_EVT  */   {BTA_HL_DCH_IGNORE,               BTA_HL_DCH_OPEN_ST},
+
+/* BTA_HL_MCA_RCV_DATA_EVT   */   {BTA_HL_DCH_IGNORE,               BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_CLOSE_CMPL_EVT */   {BTA_HL_DCH_CLOSE_CMPL,           BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_RECONNECT_EVT  */   {BTA_HL_DCH_MCA_RECONNECT,        BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_SDP_FAIL_EVT   */   {BTA_HL_DCH_SDP_FAIL,             BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_RECONNECT_IND_EVT*/ {BTA_HL_DCH_IGNORE,               BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_MCA_RECONNECT_CFM_EVT*/ {BTA_HL_DCH_MCA_RECONNECT_CFM,    BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_CLOSE_ECHO_TEST_EVT*/ {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_API_DCH_CREATE_RSP_EVT */ {BTA_HL_DCH_CREATE_RSP,         BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_ABORT_EVT */          {BTA_HL_DCH_MCA_ABORT,          BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_ABORT_IND_EVT */      {BTA_HL_DCH_MCA_ABORT_IND,      BTA_HL_DCH_OPENING_ST},
+
+/* BTA_HL_MCA_ABORT_CFM_EVT */      {BTA_HL_DCH_MCA_ABORT_CFM,      BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_MCA_CONG_CHG_EVT */       {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_CI_GET_TX_DATA_EVT  */    {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_CI_PUT_RX_DATA_EVT  */    {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_CI_GET_ECHO_DATA_EVT  */  {BTA_HL_DCH_CI_GET_ECHO_DATA,   BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_DCH_ECHO_TEST_EVT  */     {BTA_HL_DCH_ECHO_TEST,          BTA_HL_DCH_OPENING_ST},
+/* BTA_HL_CI_PUT_ECHO_DATA_EVT  */  {BTA_HL_DCH_IGNORE,             BTA_HL_DCH_OPENING_ST}
+};
+
+/* state table for open state */
+static const UINT8 bta_hl_dch_st_open[][BTA_HL_DCH_NUM_COLS] =
+{
+/* Event                                Action 1                  Next state */
+/* BTA_HL_DCH_SDP_INIT_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_OPEN_EVT       */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_CREATE_IND_EVT */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_CREATE_CFM_EVT */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_OPEN_IND_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_OPEN_CFM_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_CLOSE_EVT      */     {BTA_HL_DCH_MCA_CLOSE,        BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CLOSE_IND_EVT  */     {BTA_HL_DCH_MCA_CLOSE_IND,    BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CLOSE_CFM_EVT  */     {BTA_HL_DCH_MCA_CLOSE_CFM,    BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_API_SEND_DATA_EVT  */     {BTA_HL_DCH_SEND_DATA,        BTA_HL_DCH_OPEN_ST},
+
+/* BTA_HL_MCA_RCV_DATA_EVT   */     {BTA_HL_DCH_MCA_RCV_DATA,     BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_CLOSE_CMPL_EVT */     {BTA_HL_DCH_CLOSE_CMPL,       BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_RECONNECT_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_SDP_FAIL_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_RECONNECT_IND_EVT*/   {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_RECONNECT_CFM_EVT*/   {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_CLOSE_ECHO_TEST_EVT*/ {BTA_HL_DCH_CLOSE_ECHO_TEST,  BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_API_DCH_CREATE_RSP_EVT */ {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_ABORT_EVT */          {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_ABORT_IND_EVT */      {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+
+/* BTA_HL_DCH_ABORT_CFM_EVT */      {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_MCA_CONG_CHG_EVT */       {BTA_HL_DCH_MCA_CONG_CHANGE,  BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_CI_GET_TX_DATA_EVT  */    {BTA_HL_DCH_CI_GET_TX_DATA,   BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_CI_PUT_RX_DATA_EVT  */    {BTA_HL_DCH_CI_PUT_RX_DATA,   BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_CI_GET_ECHO_DATA_EVT  */  {BTA_HL_DCH_CI_GET_ECHO_DATA, BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_DCH_ECHO_TEST_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_OPEN_ST},
+/* BTA_HL_CI_PUT_ECHO_DATA_EVT  */  {BTA_HL_DCH_CI_PUT_ECHO_DATA, BTA_HL_DCH_OPEN_ST}
+};
+
+
+/* state table for closing state */
+static const UINT8 bta_hl_dch_st_closing[][BTA_HL_DCH_NUM_COLS] =
+{
+/* Event                                Action 1                  Next state */
+/* BTA_HL_DCH_SDP_INIT_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_OPEN_EVT       */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CREATE_IND_EVT */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CREATE_CFM_EVT */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_OPEN_IND_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_OPEN_CFM_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_CLOSE_EVT      */     {BTA_HL_DCH_MCA_CLOSE,        BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CLOSE_IND_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CLOSE_CFM_EVT  */     {BTA_HL_DCH_MCA_CLOSE_CFM,    BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_API_SEND_DATA_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+
+/* BTA_HL_MCA_RCV_DATA_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_CLOSE_CMPL_EVT */     {BTA_HL_DCH_CLOSE_CMPL,       BTA_HL_DCH_IDLE_ST},
+/* BTA_HL_DCH_RECONNECT_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_SDP_FAIL_EVT   */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_RECONNECT_IND_EVT*/   {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_RECONNECT_CFM_EVT*/   {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_CLOSE_ECHO_TEST_EVT*/ {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_API_DCH_CREATE_RSP_EVT */ {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_ABORT_EVT */          {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_ABORT_IND_EVT */      {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+
+/* BTA_HL_DCH_ABORT_CFM_EVT */      {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_MCA_CONG_CHG_EVT */       {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_CI_GET_TX_DATA_EVT  */    {BTA_HL_DCH_CI_GET_TX_DATA,   BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_CI_PUT_RX_DATA_EVT  */    {BTA_HL_DCH_CI_PUT_RX_DATA,   BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_CI_GET_ECHO_DATA_EVT  */  {BTA_HL_DCH_CI_GET_ECHO_DATA, BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_DCH_ECHO_TEST_EVT  */     {BTA_HL_DCH_IGNORE,           BTA_HL_DCH_CLOSING_ST},
+/* BTA_HL_CI_PUT_ECHO_DATA_EVT  */  {BTA_HL_DCH_CI_PUT_ECHO_DATA, BTA_HL_DCH_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_HL_DCH_ST_TBL)[BTA_HL_DCH_NUM_COLS];
+
+/* state table */
+const tBTA_HL_DCH_ST_TBL bta_hl_dch_st_tbl[] =
+{
+    bta_hl_dch_st_idle,
+    bta_hl_dch_st_opening,
+    bta_hl_dch_st_open,
+    bta_hl_dch_st_closing
+};
+
+/*****************************************************************************
+** CCH State Table
+*****************************************************************************/
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+/* state machine action enumeration list for CCH */
+enum
+{
+    BTA_HL_CCH_SDP_INIT,
+    BTA_HL_CCH_MCA_OPEN,
+    BTA_HL_CCH_MCA_CLOSE,
+    BTA_HL_CCH_CLOSE_CMPL,
+    BTA_HL_CCH_MCA_CONNECT,
+    BTA_HL_CCH_MCA_DISCONNECT,
+    BTA_HL_CCH_MCA_RSP_TOUT,
+    BTA_HL_CCH_IGNORE
+};
+
+/* type for action functions */
+typedef void (*tBTA_HL_CCH_ACTION)(UINT8 app_idx, UINT8 mcl_idx, tBTA_HL_DATA *p_data);
+
+/* action function list for MAS */
+const tBTA_HL_CCH_ACTION bta_hl_cch_action[] =
+{
+    bta_hl_cch_sdp_init,
+    bta_hl_cch_mca_open,
+    bta_hl_cch_mca_close,
+    bta_hl_cch_close_cmpl,
+    bta_hl_cch_mca_connect,
+    bta_hl_cch_mca_disconnect,
+    bta_hl_cch_mca_rsp_tout
+};
+
+
+/* state table information */
+#define BTA_HL_CCH_ACTIONS             1       /* number of actions */
+#define BTA_HL_CCH_NEXT_STATE          1       /* position of next state */
+#define BTA_HL_CCH_NUM_COLS            2       /* number of columns in state tables */
+
+
+/* state table for MAS idle state */
+static const UINT8 bta_hl_cch_st_idle[][BTA_HL_CCH_NUM_COLS] =
+{
+/* Event                          Action 1                  Next state */
+/* BTA_HL_CCH_OPEN_EVT           */ {BTA_HL_CCH_SDP_INIT,       BTA_HL_CCH_OPENING_ST},
+/* BTA_HL_CCH_SDP_OK_EVT         */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_CCH_SDP_FAIL_EVT       */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_MCA_CONNECT_IND_EVT    */ {BTA_HL_CCH_MCA_CONNECT,    BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_DISCONNECT_IND_EVT */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_CCH_CLOSE_EVT          */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_CCH_CLOSE_CMPL_EVT     */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_CCH_CLOSE_CMPL_EVT     */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_IDLE_ST}
+};
+
+/* state table for obex/rfcomm connection state */
+static const UINT8 bta_hl_cch_st_opening[][BTA_HL_CCH_NUM_COLS] =
+{
+/* Event                          Action 1               Next state */
+/* BTA_HL_CCH_OPEN_EVT           */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPENING_ST},
+/* BTA_HL_CCH_SDP_OK_EVT         */ {BTA_HL_CCH_MCA_OPEN,       BTA_HL_CCH_OPENING_ST},
+/* BTA_HL_CCH_SDP_FAIL_EVT       */ {BTA_HL_CCH_CLOSE_CMPL,     BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_MCA_CONNECT_IND_EVT    */ {BTA_HL_CCH_MCA_CONNECT,    BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_DISCONNECT_IND_EVT */ {BTA_HL_CCH_MCA_DISCONNECT, BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_EVT          */ {BTA_HL_CCH_MCA_CLOSE,      BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_CMPL_EVT     */ {BTA_HL_CCH_CLOSE_CMPL,     BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_MCA_RSP_TOUT_IND_EVT   */ {BTA_HL_CCH_MCA_RSP_TOUT,   BTA_HL_CCH_CLOSING_ST}
+};
+
+/* state table for open state */
+static const UINT8 bta_hl_cch_st_open[][BTA_HL_CCH_NUM_COLS] =
+{
+/* Event                          Action 1                  Next state */
+/* BTA_HL_CCH_OPEN_EVT           */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_CCH_SDP_OK_EVT         */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_CCH_SDP_FAIL_EVT       */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_CONNECT_IND_EVT    */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_DISCONNECT_IND_EVT */ {BTA_HL_CCH_MCA_DISCONNECT, BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_EVT          */ {BTA_HL_CCH_MCA_CLOSE,      BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_CMPL_EVT     */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_RSP_TOUT_IND_EVT   */ {BTA_HL_CCH_MCA_RSP_TOUT,   BTA_HL_CCH_CLOSING_ST}
+};
+
+/* state table for closing state */
+static const UINT8 bta_hl_cch_st_closing[][BTA_HL_CCH_NUM_COLS] =
+{
+/* Event                          Action 1                  Next state */
+/* BTA_HL_CCH_OPEN_EVT           */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_SDP_OK_EVT         */ {BTA_HL_CCH_CLOSE_CMPL,     BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_CCH_SDP_FAIL_EVT       */ {BTA_HL_CCH_CLOSE_CMPL,     BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_MCA_CONNECT_IND_EVT    */ {BTA_HL_CCH_MCA_CONNECT,    BTA_HL_CCH_OPEN_ST},
+/* BTA_HL_MCA_DISCONNECT_IND_EVT */ {BTA_HL_CCH_MCA_DISCONNECT, BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_EVT          */ {BTA_HL_CCH_MCA_CLOSE,      BTA_HL_CCH_CLOSING_ST},
+/* BTA_HL_CCH_CLOSE_CMPL_EVT     */ {BTA_HL_CCH_CLOSE_CMPL,     BTA_HL_CCH_IDLE_ST},
+/* BTA_HL_MCA_RSP_TOUT_IND_EVT   */ {BTA_HL_CCH_IGNORE,         BTA_HL_CCH_CLOSING_ST}
+};
+
+/* type for state table CCH */
+typedef const UINT8 (*tBTA_HL_CCH_ST_TBL)[BTA_HL_CCH_NUM_COLS];
+
+/* MAS state table */
+const tBTA_HL_CCH_ST_TBL bta_hl_cch_st_tbl[] =
+{
+    bta_hl_cch_st_idle,
+    bta_hl_cch_st_opening,
+    bta_hl_cch_st_open,
+    bta_hl_cch_st_closing
+};
+
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+
+/* HL control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_HL_CB  bta_hl_cb;
+#endif
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_sm_execute
+**
+** Description      State machine event handling function for CCH
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_cch_sm_execute(UINT8 app_idx, UINT8 mcl_idx,
+                           UINT16 event, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_CCH_ST_TBL  state_table;
+    UINT8               action;
+    int                 i;
+    tBTA_HL_MCL_CB      *p_cb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+    tBTA_HL_CCH_STATE in_state = p_cb->cch_state;
+    UINT16             cur_evt = event;
+    APPL_TRACE_DEBUG3("HDP CCH Event Handler: State 0x%02x [%s], Event [%s]", in_state,
+                      bta_hl_cch_state_code(in_state),
+                      bta_hl_evt_code(cur_evt));
+#endif
+
+    /* look up the state table for the current state */
+    state_table = bta_hl_cch_st_tbl[p_cb->cch_state];
+
+    event &= 0x00FF;
+
+    /* set next state */
+    p_cb->cch_state = state_table[event][BTA_HL_CCH_NEXT_STATE];
+
+    for (i = 0; i < BTA_HL_CCH_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_HL_CCH_IGNORE)
+        {
+            (*bta_hl_cch_action[action])(app_idx, mcl_idx, p_data);
+        }
+        else
+        {
+            /* discard HDP data */
+            bta_hl_discard_data(p_data->hdr.event, p_data);
+            break;
+        }
+    }
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+    if (in_state != p_cb->cch_state)
+    {
+        APPL_TRACE_DEBUG3("HL CCH State Change: [%s] -> [%s] after [%s]",
+                          bta_hl_cch_state_code(in_state),
+                          bta_hl_cch_state_code(p_cb->cch_state),
+                          bta_hl_evt_code(cur_evt));
+    }
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_sm_execute
+**
+** Description      State machine event handling function for DCH
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_dch_sm_execute(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                           UINT16 event, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_DCH_ST_TBL  state_table;
+    UINT8               action;
+    int                 i;
+    tBTA_HL_MDL_CB      *p_cb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+    tBTA_HL_DCH_STATE in_state = p_cb->dch_state;
+    UINT16             cur_evt = event;
+    APPL_TRACE_DEBUG3("HDP DCH Event Handler: State 0x%02x [%s], Event [%s]", in_state,
+                      bta_hl_dch_state_code(in_state),
+                      bta_hl_evt_code(cur_evt));
+#endif
+
+    /* look up the state table for the current state */
+    state_table = bta_hl_dch_st_tbl[p_cb->dch_state];
+    event -= BTA_HL_DCH_EVT_MIN;
+
+    /* set next state */
+    p_cb->dch_state = state_table[event][BTA_HL_DCH_NEXT_STATE];
+
+    for (i = 0; i < BTA_HL_DCH_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_HL_DCH_IGNORE)
+        {
+            (*bta_hl_dch_action[action])(app_idx, mcl_idx, mdl_idx, p_data);
+        }
+        else
+        {
+            /* discard mas data */
+            bta_hl_discard_data(p_data->hdr.event, p_data);
+            break;
+        }
+    }
+
+
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+    if (in_state != p_cb->dch_state)
+    {
+        APPL_TRACE_DEBUG3("HL DCH State Change: [%s] -> [%s] after [%s]",
+                          bta_hl_dch_state_code(in_state),
+                          bta_hl_dch_state_code(p_cb->dch_state),
+                          bta_hl_evt_code(cur_evt));
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         bta_hl_api_enable
+**
+** Description      Process the API enable request to enable the HL subsystem
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_enable(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_CTRL    evt_data;
+
+    /* If already enabled then reject this request */
+    if (p_cb->enable)
+    {
+        APPL_TRACE_ERROR0("HL is already enabled");
+        evt_data.enable_cfm.status = BTA_HL_STATUS_FAIL;
+        if (p_data->api_enable.p_cback)
+            p_data->api_enable.p_cback(BTA_HL_CTRL_ENABLE_CFM_EVT, (tBTA_HL_CTRL *) &evt_data);
+        return;
+    }
+
+    /* Done with checking. now perform the enable oepration*/
+    /* initialize control block */
+    memset(p_cb, 0, sizeof(tBTA_HL_CB));
+    p_cb->enable = TRUE;
+    p_cb->p_ctrl_cback = p_data->api_enable.p_cback;
+    evt_data.enable_cfm.status = BTA_HL_STATUS_OK;
+    if (p_data->api_enable.p_cback)
+        p_data->api_enable.p_cback(BTA_HL_CTRL_ENABLE_CFM_EVT, (tBTA_HL_CTRL *) &evt_data);
+
+}
+/*******************************************************************************
+**
+** Function         bta_hl_api_disable
+**
+** Description      Process the API disable request to disable the HL subsystem
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_disable(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_CTRL    evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+
+    if (p_cb->enable)
+    {
+        p_cb->disabling = TRUE;
+        bta_hl_check_disable(p_data);
+    }
+    else
+    {
+        status = BTA_HL_STATUS_FAIL;
+        evt_data.disable_cfm.status = status;
+        if (p_cb->p_ctrl_cback) p_cb->p_ctrl_cback(BTA_HL_CTRL_DISABLE_CFM_EVT, (tBTA_HL_CTRL *) &evt_data);
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_disable status =%s", bta_hl_status_code(status));
+    }
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_register
+**
+** Description      Process the API registration request to register an HDP applciation
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_register(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    UINT8           app_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_FAIL;
+
+    if (p_cb->enable)
+    {
+        if (!bta_hl_is_a_duplicate_id(p_data->api_reg.app_id))
+        {
+            if (bta_hl_find_avail_app_idx(&app_idx))
+            {
+                p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+                p_acb->in_use = TRUE;
+                p_acb->app_id = p_data->api_reg.app_id;
+                p_acb->p_cback = p_data->api_reg.p_cback;
+                p_acb->sec_mask = p_data->api_reg.sec_mask;
+                p_acb->dev_type = p_data->api_reg.dev_type;
+                BCM_STRNCPY_S(p_acb->srv_name, sizeof(p_acb->srv_name), p_data->api_reg.srv_name, BTA_SERVICE_NAME_LEN);
+                BCM_STRNCPY_S(p_acb->srv_desp, sizeof(p_acb->srv_desp), p_data->api_reg.srv_desp, BTA_SERVICE_DESP_LEN);
+                BCM_STRNCPY_S(p_acb->provider_name, sizeof(p_acb->provider_name), p_data->api_reg.provider_name, BTA_PROVIDER_NAME_LEN);
+                bta_hl_cb.p_alloc_psm = L2CA_AllocatePSM;
+                p_acb->ctrl_psm = bta_hl_cb.p_alloc_psm();
+                p_acb->data_psm = bta_hl_cb.p_alloc_psm();
+                p_acb->p_mcap_cback = bta_hl_mcap_ctrl_cback;
+                status = bta_hl_app_registration(app_idx);
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_RESOURCE;
+            }
+        }
+        else
+        {
+            status = BTA_HL_STATUS_DUPLICATE_APP_ID;
+        }
+    }
+
+    if (status != BTA_HL_STATUS_OK)
+    {
+        if ((status != BTA_HL_STATUS_DUPLICATE_APP_ID) &&
+            (status != BTA_HL_STATUS_NO_RESOURCE))
+        {
+            memset(p_acb, 0, sizeof(tBTA_HL_APP_CB));
+        }
+    }
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_register status =%s", bta_hl_status_code(status));
+    }
+#endif
+
+    evt_data.reg_cfm.status = status;
+    evt_data.reg_cfm.app_id = p_data->api_reg.app_id;
+    evt_data.reg_cfm.app_handle = p_acb->app_handle;
+    if (p_data->api_reg.p_cback)
+    {
+        p_data->api_reg.p_cback(BTA_HL_REGISTER_CFM_EVT, (tBTA_HL *) &evt_data);
+    }
+
+    if (status == BTA_HL_STATUS_OK)
+    {
+        evt_data.sdp_info_ind.app_handle = p_acb->app_handle;
+        evt_data.sdp_info_ind.ctrl_psm = p_acb->ctrl_psm;
+        evt_data.sdp_info_ind.data_psm = p_acb->data_psm;
+        evt_data.sdp_info_ind.data_x_spec = BTA_HL_SDP_IEEE_11073_20601;
+        evt_data.sdp_info_ind.mcap_sup_procs = BTA_HL_MCAP_SUP_PROC_MASK ;
+
+        if (p_data->api_reg.p_cback)
+        {
+            p_data->api_reg.p_cback(BTA_HL_SDP_INFO_IND_EVT, (tBTA_HL *) &evt_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_deregister
+**
+** Description      Process the API de-registration request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_deregister(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+
+    UINT8           app_idx;
+    tBTA_HL_APP_CB  *p_acb;
+
+    if (bta_hl_find_app_idx_using_handle(p_data->api_dereg.app_handle, &app_idx))
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        p_acb->deregistering= TRUE;
+        bta_hl_check_deregistration(app_idx,p_data);
+    }
+    else
+    {
+        APPL_TRACE_ERROR1("Inavlide app_handle=%d", p_data->api_dereg.app_handle);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_cch_open
+**
+** Description      Process the API CCH open request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_cch_open(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+
+    if (bta_hl_find_app_idx_using_handle(p_data->api_cch_open.app_handle, &app_idx))
+    {
+
+        if (!bta_hl_find_mcl_idx(app_idx, p_data->api_cch_open.bd_addr, &mcl_idx))
+        {
+            if (bta_hl_find_avail_mcl_idx(app_idx, &mcl_idx))
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                p_mcb->in_use = TRUE;
+                p_mcb->req_ctrl_psm = p_data->api_cch_open.ctrl_psm;
+                p_mcb->sec_mask = p_data->api_cch_open.sec_mask;
+                bdcpy(p_mcb->bd_addr, p_data->api_cch_open.bd_addr);
+                p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_OPEN;
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_RESOURCE;
+            }
+        }
+        else
+        {
+            /* Only one MCL per BD_ADDR */
+            status = BTA_HL_STATUS_FAIL;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_APP_HANDLE;
+    }
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_cch_open status =%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_OPEN_EVT, p_data);
+            break;
+        case BTA_HL_STATUS_NO_RESOURCE:
+        case BTA_HL_STATUS_FAIL:
+            bta_hl_build_cch_open_cfm(&evt_data, p_data->api_cch_open.app_handle,
+                                      0,
+                                      p_data->api_cch_open.bd_addr,
+                                      status);
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            p_acb->p_cback(BTA_HL_CCH_OPEN_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        default:
+            APPL_TRACE_ERROR1("status code=%d", status);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_cch_close
+**
+** Description      Process the API CCH close request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_cch_close(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_cch_close.mcl_handle, &app_idx,  &mcl_idx))
+    {
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_CLOSE;
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MCL_HANDLE;
+    }
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_cch_close status =%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            bta_hl_check_cch_close(app_idx, mcl_idx, p_data, TRUE);
+            break;
+
+        case BTA_HL_STATUS_FAIL:
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            bta_hl_build_cch_close_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_data->api_cch_close.mcl_handle,
+                                       status);
+            p_acb->p_cback(BTA_HL_CCH_CLOSE_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+
+        default:
+            APPL_TRACE_ERROR1("status code=%d", status);
+            break;
+
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_dch_open
+**
+** Description      Process the API DCH open request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_dch_open(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL                     evt_data;
+    tBTA_HL_STATUS              status = BTA_HL_STATUS_OK;
+    UINT8                       app_idx, mcl_idx, mdl_idx;
+    tBTA_HL_APP_CB              *p_acb;
+    tBTA_HL_MCL_CB              *p_mcb;
+    tBTA_HL_MDL_CB              *p_dcb;
+    tBTA_HL_MDEP_CFG            *p_mdep_cfg;
+    UINT8                       mdep_cfg_idx;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_dch_open.mcl_handle, &app_idx, &mcl_idx))
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+        if (p_mcb->cch_state == BTA_HL_CCH_OPEN_ST)
+        {
+            if (bta_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+            {
+                p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+                if (bta_hl_find_mdep_cfg_idx(app_idx, p_data->api_dch_open.local_mdep_id, &mdep_cfg_idx))
+                {
+                    if ( mdep_cfg_idx &&
+                         (p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SINK))
+                    {
+                        p_data->api_dch_open.local_cfg = BTA_HL_DCH_CFG_NO_PREF;
+                    }
+
+                    if ((status = bta_hl_chk_local_cfg(app_idx,mcl_idx,mdep_cfg_idx,p_data->api_dch_open.local_cfg))
+                        == BTA_HL_STATUS_OK)
+                    {
+
+                        if (p_data->api_dch_open.local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+                        {
+                            if (bta_hl_set_ctrl_psm_for_dch(app_idx, mcl_idx, mdl_idx, p_data->api_dch_open.ctrl_psm))
+                            {
+                                p_mdep_cfg = BTA_HL_GET_MDEP_CFG_PTR(app_idx, mdep_cfg_idx);
+                                p_dcb->in_use                   = TRUE;
+                                p_dcb->dch_oper                 = BTA_HL_DCH_OP_LOCAL_OPEN;
+                                p_dcb->sec_mask                 = p_data->api_dch_open.sec_mask;
+                                p_dcb->local_mdep_id            = p_data->api_dch_open.local_mdep_id;
+                                p_dcb->peer_mdep_id             = p_data->api_dch_open.peer_mdep_id;
+
+                                if (p_mdep_cfg->mdep_role == BTA_HL_MDEP_ROLE_SINK)
+                                {
+                                    p_dcb->peer_mdep_role = BTA_HL_MDEP_ROLE_SOURCE;
+                                }
+                                else
+                                {
+                                    p_dcb->peer_mdep_role = BTA_HL_MDEP_ROLE_SINK;
+                                }
+
+                                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                                p_dcb->local_cfg            = p_data->api_dch_open.local_cfg;
+
+                                bta_hl_find_rxtx_apdu_size(app_idx, mdep_cfg_idx,
+                                                           &p_dcb->max_rx_apdu_size,
+                                                           &p_dcb->max_tx_apdu_size);
+                                p_dcb->mdl_id               = bta_hl_allocate_mdl_id(app_idx,mcl_idx,mdl_idx);
+                                p_dcb->mdl_cfg_idx_included = FALSE;
+                            }
+                            else
+                            {
+                                status =  BTA_HL_STATUS_INVALID_CTRL_PSM;
+                            }
+
+                        }
+                        else
+                        {
+                            status =  BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID;
+                        }
+                    }
+                }
+                else
+                {
+                    status =  BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID;
+                }
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_RESOURCE;
+            }
+        }
+        else
+        {
+            status =  BTA_HL_STATUS_NO_CCH;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MCL_HANDLE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_dch_open status =%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            if (p_mcb->sdp.num_recs)
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_OPEN_EVT, p_data);
+            }
+            else
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_SDP_INIT_EVT, p_data);
+            }
+            break;
+        case BTA_HL_STATUS_INVALID_DCH_CFG:
+        case BTA_HL_STATUS_NO_FIRST_RELIABLE:
+        case BTA_HL_STATUS_NO_CCH:
+        case BTA_HL_STATUS_NO_RESOURCE:
+        case BTA_HL_STATUS_FAIL:
+        case BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID:
+        case BTA_HL_STATUS_INVALID_CTRL_PSM:
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            bta_hl_build_dch_open_cfm(&evt_data,
+                                      p_acb->app_handle,
+                                      p_data->api_dch_open.mcl_handle,
+                                      BTA_HL_INVALID_MDL_HANDLE,
+                                      0,0,0,0,0, status);
+            p_acb->p_cback(BTA_HL_DCH_OPEN_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        default:
+            APPL_TRACE_ERROR1("Status code=%d", status);
+            break;
+
+    }
+
+}
+/*******************************************************************************
+**
+** Function         bta_hl_api_dch_close
+**
+** Description      Process the API DCH close request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_dch_close(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx, mdl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+    tBTA_HL_MDL_CB  *p_dcb;
+
+
+    if (bta_hl_find_mdl_idx_using_handle(p_data->api_dch_close.mdl_handle, &app_idx, &mcl_idx, &mdl_idx ))
+    {
+        p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+        if (p_dcb->dch_state != BTA_HL_DCH_OPEN_ST)
+        {
+            status =  BTA_HL_STATUS_FAIL;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MDL_HANDLE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_dch_close status =%s", bta_hl_status_code(status));
+    }
+#endif
+
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_EVT, p_data);
+            break;
+        case BTA_HL_STATUS_FAIL:
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            bta_hl_build_dch_close_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       p_data->api_dch_close.mdl_handle,
+                                       status);
+
+            p_acb->p_cback(BTA_HL_DCH_CLOSE_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        default:
+            APPL_TRACE_ERROR1("Status code=%d", status);
+            break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_dch_reconnect
+**
+** Description      Process the API DCH reconnect request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_dch_reconnect(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx, mdl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+    tBTA_HL_MDL_CB  *p_dcb;
+    UINT8           mdep_cfg_idx;
+    UINT8           mdl_cfg_idx;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_dch_open.mcl_handle, &app_idx, &mcl_idx))
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        if (p_mcb->cch_state == BTA_HL_CCH_OPEN_ST)
+        {
+            if (bta_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+            {
+                p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+                if (bta_hl_validate_reconnect_params(app_idx, mcl_idx,  &(p_data->api_dch_reconnect),
+                                                     &mdep_cfg_idx, &mdl_cfg_idx ))
+                {
+                    if (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx) &&
+                        (p_acb->mdl_cfg[mdl_cfg_idx].dch_mode != BTA_HL_DCH_MODE_RELIABLE))
+                    {
+                        status =  BTA_HL_STATUS_NO_FIRST_RELIABLE;
+                    }
+                    else
+                    {
+                        if (bta_hl_set_ctrl_psm_for_dch(app_idx, mcl_idx, mdl_idx, p_data->api_dch_open.ctrl_psm))
+                        {
+                            p_dcb->in_use                   = TRUE;
+                            p_dcb->dch_oper                 = BTA_HL_DCH_OP_LOCAL_RECONNECT;
+                            p_dcb->sec_mask                 = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+                            p_dcb->local_mdep_id            = p_acb->mdl_cfg[mdl_cfg_idx].local_mdep_id;
+                            p_dcb->local_mdep_cfg_idx       = mdep_cfg_idx;
+                            p_dcb->local_cfg                = BTA_HL_DCH_CFG_UNKNOWN;
+                            p_dcb->mdl_id                   = p_data->api_dch_reconnect.mdl_id;
+                            p_dcb->mdl_cfg_idx_included     = TRUE;
+                            p_dcb->mdl_cfg_idx              = mdl_cfg_idx;
+                            p_dcb->dch_mode                 = p_acb->mdl_cfg[mdl_cfg_idx].dch_mode;
+                            bta_hl_find_rxtx_apdu_size(app_idx, mdep_cfg_idx,
+                                                       &p_dcb->max_rx_apdu_size,
+                                                       &p_dcb->max_tx_apdu_size);
+                        }
+                        else
+                        {
+                            status =  BTA_HL_STATUS_INVALID_CTRL_PSM;
+                        }
+                    }
+                }
+                else
+                {
+                    status =  BTA_HL_STATUS_INVALID_RECONNECT_CFG;
+                }
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_RESOURCE;
+            }
+        }
+        else
+        {
+            status =  BTA_HL_STATUS_NO_CCH;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MCL_HANDLE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_dch_reconnect status=%s", bta_hl_status_code(status));
+    }
+#endif
+
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            if (p_mcb->sdp.num_recs)
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_RECONNECT_EVT, p_data);
+            }
+            else
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_SDP_INIT_EVT, p_data);
+            }
+            break;
+        case BTA_HL_STATUS_INVALID_RECONNECT_CFG:
+        case BTA_HL_STATUS_NO_FIRST_RELIABLE:
+        case BTA_HL_STATUS_NO_CCH:
+        case BTA_HL_STATUS_NO_RESOURCE:
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            bta_hl_build_dch_open_cfm(&evt_data,
+                                      p_acb->app_handle,
+                                      p_data->api_dch_reconnect.mcl_handle,
+                                      BTA_HL_INVALID_MDL_HANDLE,
+                                      0,p_data->api_dch_reconnect.mdl_id,0,0,0, status);
+            p_acb->p_cback(BTA_HL_DCH_RECONNECT_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        default:
+            APPL_TRACE_ERROR1("Status code=%d", status);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_dch_echo_test
+**
+** Description      Process the API Echo test request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_dch_echo_test(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL             evt_data;
+    tBTA_HL_STATUS      status = BTA_HL_STATUS_OK;
+    UINT8               app_idx, mcl_idx, mdl_idx;
+    tBTA_HL_APP_CB      *p_acb;
+    tBTA_HL_MCL_CB      *p_mcb;
+    tBTA_HL_MDL_CB      *p_dcb;
+    tBTA_HL_ECHO_CFG    *p_echo_cfg;
+
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_dch_echo_test.mcl_handle, &app_idx,  &mcl_idx))
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        if (p_mcb->cch_state == BTA_HL_CCH_OPEN_ST)
+        {
+            if (!p_mcb->echo_test )
+            {
+                if (bta_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+                {
+                    p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+                    if ((p_data->api_dch_echo_test.local_cfg == BTA_HL_DCH_CFG_RELIABLE) ||
+                        (p_data->api_dch_echo_test.local_cfg == BTA_HL_DCH_CFG_STREAMING))
+                    {
+                        if ((p_dcb->p_echo_tx_pkt = bta_hl_get_buf(p_data->api_dch_echo_test.pkt_size)) != NULL )
+                        {
+                            if (bta_hl_set_ctrl_psm_for_dch(app_idx, mcl_idx, mdl_idx, p_data->api_dch_open.ctrl_psm))
+                            {
+                                p_dcb->in_use                   = TRUE;
+                                p_dcb->dch_oper                 = BTA_HL_DCH_OP_LOCAL_OPEN;
+                                p_dcb->sec_mask                 = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+                                p_dcb->local_mdep_cfg_idx       = BTA_HL_ECHO_TEST_MDEP_CFG_IDX;
+                                p_dcb->local_cfg                = p_data->api_dch_echo_test.local_cfg;
+                                p_dcb->local_mdep_id            = BTA_HL_ECHO_TEST_MDEP_ID;
+                                p_dcb->peer_mdep_id             = BTA_HL_ECHO_TEST_MDEP_ID;
+                                p_dcb->mdl_id                   = bta_hl_allocate_mdl_id(app_idx,mcl_idx,mdl_idx);
+                                p_dcb->mdl_cfg_idx_included     = FALSE;
+                                p_echo_cfg                      = BTA_HL_GET_ECHO_CFG_PTR(app_idx);
+                                p_dcb->max_rx_apdu_size         = p_echo_cfg->max_rx_apdu_size;
+                                p_dcb->max_tx_apdu_size         = p_echo_cfg->max_tx_apdu_size;
+                                p_mcb->echo_test                = TRUE;
+                                p_mcb->echo_mdl_idx             = mdl_idx;
+                            }
+                            else
+                            {
+                                status =  BTA_HL_STATUS_INVALID_CTRL_PSM;
+                            }
+                        }
+                        else
+                        {
+                            status = BTA_HL_STATUS_NO_RESOURCE;
+                        }
+                    }
+                    else
+                    {
+                        status = BTA_HL_STATUS_INVALID_DCH_CFG;
+                    }
+                }
+                else
+                {
+                    status = BTA_HL_STATUS_NO_RESOURCE;
+                }
+            }
+            else
+            {
+                status = BTA_HL_STATUS_ECHO_TEST_BUSY;
+            }
+        }
+        else
+        {
+            status =  BTA_HL_STATUS_NO_CCH;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_NO_MCL;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_dch_echo_test status=%s", bta_hl_status_code(status));
+    }
+#endif
+
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            if (p_mcb->sdp.num_recs)
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ECHO_TEST_EVT, p_data);
+            }
+            else
+            {
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_SDP_INIT_EVT, p_data);
+            }
+            break;
+        case BTA_HL_STATUS_NO_CCH:
+        case BTA_HL_STATUS_ECHO_TEST_BUSY:
+        case BTA_HL_STATUS_NO_RESOURCE:
+        case BTA_HL_STATUS_INVALID_DCH_CFG:
+            bta_hl_build_echo_test_cfm(&evt_data,
+                                       p_acb->app_handle,
+                                       p_mcb->mcl_handle,
+                                       status);
+            p_acb->p_cback(BTA_HL_DCH_ECHO_TEST_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+
+        default:
+            APPL_TRACE_ERROR1("Status code=%s", status);
+            break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_sdp_query
+**
+** Description      Process the API SDP query request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_sdp_query(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+
+
+    if (bta_hl_find_app_idx_using_handle(p_data->api_sdp_query.app_handle, &app_idx))
+    {
+        if (!bta_hl_find_mcl_idx(app_idx, p_data->api_sdp_query.bd_addr, &mcl_idx))
+        {
+            if (bta_hl_find_avail_mcl_idx(app_idx, &mcl_idx))
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                p_mcb->in_use = TRUE;
+                bdcpy(p_mcb->bd_addr, p_data->api_sdp_query.bd_addr);
+                p_mcb->sdp_oper  = BTA_HL_SDP_OP_SDP_QUERY_NEW ;
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_RESOURCE;
+            }
+        }
+        else
+        {
+            p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            if (p_mcb->sdp_oper != BTA_HL_SDP_OP_NONE)
+            {
+                status = BTA_HL_STATUS_SDP_NO_RESOURCE;
+            }
+            else
+            {
+                p_mcb->sdp_oper  = BTA_HL_SDP_OP_SDP_QUERY_CURRENT;
+            }
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_APP_HANDLE;
+    }
+
+    if (status == BTA_HL_STATUS_OK)
+    {
+        status = bta_hl_init_sdp( p_mcb->sdp_oper, app_idx, mcl_idx, 0xFF);
+        if ( (status != BTA_HL_STATUS_OK) &&
+             (p_mcb->sdp_oper == BTA_HL_SDP_OP_SDP_QUERY_NEW) )
+        {
+            memset(p_mcb, 0 ,sizeof(tBTA_HL_MCL_CB));
+        }
+    }
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_sdp_query status=%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_NO_RESOURCE:
+        case BTA_HL_STATUS_FAIL:
+        case BTA_HL_STATUS_SDP_NO_RESOURCE:
+            bta_hl_build_sdp_query_cfm(&evt_data,
+                                       p_data->api_sdp_query.app_handle,
+                                       p_data->api_sdp_query.bd_addr,
+                                       NULL,
+                                       status);
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            p_acb->p_cback(BTA_HL_SDP_QUERY_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        case BTA_HL_STATUS_OK:
+            break;
+        default:
+            APPL_TRACE_ERROR1("Status code=%d", status);
+            break;
+    }
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_sdp_query_results
+**
+** Description      Process the SDP query results
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_sdp_query_results(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL             evt_data;
+    tBTA_HL_STATUS      status = BTA_HL_STATUS_OK;
+    UINT8               app_idx = p_data->cch_sdp.app_idx;
+    UINT8               mcl_idx = p_data->cch_sdp.mcl_idx;
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR( app_idx);
+    tBTA_HL_MCL_CB      *p_mcb =  BTA_HL_GET_MCL_CB_PTR( app_idx,  mcl_idx);
+    tBTA_HL_SDP         *p_sdp=NULL;
+    tBTA_HL_SDP_OPER    sdp_oper;
+    UINT16              event;
+    BOOLEAN             release_sdp_buf=FALSE;
+
+    event = p_data->hdr.event;
+    sdp_oper = p_mcb->sdp_oper;
+
+    if ( event == BTA_HL_SDP_QUERY_OK_EVT)
+    {
+        if ((p_sdp = (tBTA_HL_SDP *)GKI_getbuf((UINT16)(sizeof(tBTA_HL_SDP)))) != NULL)
+        {
+            memcpy(p_sdp, &p_mcb->sdp, sizeof(tBTA_HL_SDP));
+            release_sdp_buf = TRUE;
+        }
+        else
+        {
+            status = BTA_HL_STATUS_SDP_NO_RESOURCE;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_SDP_FAIL;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_sdp_query_results status=%s", bta_hl_status_code(status));
+    }
+#endif
+
+    bta_hl_build_sdp_query_cfm(&evt_data,p_acb->app_handle,
+                               p_mcb->bd_addr,p_sdp,status);
+    p_acb->p_cback(BTA_HL_SDP_QUERY_CFM_EVT,(tBTA_HL *) &evt_data );
+
+    if (release_sdp_buf)
+    {
+        utl_freebuf((void **) &p_sdp);
+    }
+
+    if (p_data->cch_sdp.release_mcl_cb)
+    {
+        memset(p_mcb, 0 ,sizeof(tBTA_HL_MCL_CB));
+    }
+    else
+    {
+        if (p_mcb->close_pending)
+        {
+            bta_hl_check_cch_close(app_idx,mcl_idx,p_data, TRUE);
+        }
+
+        if (!p_mcb->ctrl_psm)
+        {
+            /* this is a control channel acceptor do not store the sdp records*/
+            memset(&p_mcb->sdp, 0, sizeof(tBTA_HL_SDP));
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_delete_mdl
+**
+** Description      Process the API DELETE MDL request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_delete_mdl(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_delete_mdl.mcl_handle, &app_idx, &mcl_idx ))
+    {
+        if (bta_hl_is_mdl_value_valid(p_data->api_delete_mdl.mdl_id))
+        {
+            p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            if (bta_hl_is_mdl_exsit_in_mcl(app_idx,
+                                           p_mcb->bd_addr,
+                                           p_data->api_delete_mdl.mdl_id))
+            {
+
+
+                p_mcb->delete_mdl.mcl_handle =  p_data->api_delete_mdl.mcl_handle;
+                p_mcb->delete_mdl.mdl_id = p_data->api_delete_mdl.mdl_id;
+                p_mcb->delete_mdl.delete_req_pending = TRUE;
+
+                if (MCA_Delete((tMCA_CL) p_mcb->mcl_handle,
+                               p_data->api_delete_mdl.mdl_id)!= MCA_SUCCESS)
+                {
+                    status = BTA_HL_STATUS_FAIL;
+                    memset(&p_mcb->delete_mdl, 0, sizeof(tBTA_HL_DELETE_MDL));
+                }
+            }
+            else
+            {
+                status = BTA_HL_STATUS_NO_MDL_ID_FOUND;
+            }
+        }
+        else
+        {
+            status = BTA_HL_STATUS_INVALID_MDL_ID;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MCL_HANDLE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_delete_mdl status=%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            break;
+        case BTA_HL_STATUS_FAIL:
+        case BTA_HL_STATUS_NO_MDL_ID_FOUND:
+        case BTA_HL_STATUS_INVALID_MDL_ID:
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            bta_hl_build_delete_mdl_cfm(&evt_data,
+                                        p_acb->app_handle,
+                                        p_data->api_delete_mdl.mcl_handle,
+                                        p_data->api_delete_mdl.mdl_id,
+                                        status);
+
+            p_acb->p_cback(BTA_HL_DELETE_MDL_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        case BTA_HL_STATUS_INVALID_APP_HANDLE:
+        default:
+            APPL_TRACE_ERROR1("status code =%d", status);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_mca_delete_mdl_cfm
+**
+** Description      Process the DELETE MDL confirmation event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_mca_delete_mdl_cfm(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx;
+    tMCA_RSP_EVT    *p_delete_cfm = &p_data->mca_evt.mca_data.delete_cfm;
+    tBTA_HL_MCL_CB  *p_mcb;
+    BOOLEAN         send_cfm_evt = TRUE;
+    tBTA_HL_APP_CB  *p_acb;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->mca_evt.mcl_handle, &app_idx, &mcl_idx))
+    {
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        if ( p_mcb->delete_mdl.delete_req_pending)
+        {
+            if (p_delete_cfm->rsp_code == MCA_RSP_SUCCESS   )
+            {
+
+                if (!bta_hl_delete_mdl_cfg(app_idx,
+                                           p_mcb->bd_addr ,
+                                           p_delete_cfm->mdl_id))
+                {
+                    status = BTA_HL_STATUS_FAIL;
+                }
+            }
+            else
+            {
+                status = BTA_HL_STATUS_FAIL;
+            }
+
+            memset(&p_mcb->delete_mdl, 0, sizeof(tBTA_HL_DELETE_MDL));
+        }
+        else
+        {
+            send_cfm_evt = FALSE;
+        }
+    }
+    else
+    {
+        send_cfm_evt = FALSE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_delete_mdl status=%s", bta_hl_status_code(status));
+    }
+#endif
+
+    if (send_cfm_evt)
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        bta_hl_build_delete_mdl_cfm(&evt_data,
+                                    p_acb->app_handle,
+                                    p_mcb->mcl_handle,
+                                    p_delete_cfm->mdl_id,
+                                    status);
+
+        p_acb->p_cback(BTA_HL_DELETE_MDL_CFM_EVT,(tBTA_HL *) &evt_data );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_mca_delete_mdl_ind
+**
+** Description      Process the DELETE MDL indication event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_mca_delete_mdl_ind(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+    tBTA_HL         evt_data;
+    UINT8           app_idx, mcl_idx, mdl_idx;
+    tMCA_EVT_HDR    *p_delete_ind = &p_data->mca_evt.mca_data.delete_ind;
+    tBTA_HL_MCL_CB  *p_mcb;
+    tBTA_HL_MDL_CB  *p_dcb;
+    BOOLEAN         send_ind_evt = TRUE;
+    tBTA_HL_APP_CB  *p_acb;
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->mca_evt.mcl_handle, &app_idx, &mcl_idx) )
+    {
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+        if (bta_hl_find_mdl_idx(app_idx, mcl_idx, p_delete_ind->mdl_id, &mdl_idx ))
+        {
+            p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+            p_dcb->dch_oper = BTA_HL_DCH_OP_REMOTE_DELETE;
+        }
+        if (bta_hl_delete_mdl_cfg(app_idx,
+                                  p_mcb->bd_addr ,
+                                  p_delete_ind->mdl_id))
+        {
+            send_ind_evt = TRUE;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!send_ind_evt)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_mca_delete_mdl_ind is_send_ind_evt =%d", send_ind_evt);
+    }
+#endif
+
+    if (send_ind_evt)
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+        evt_data.delete_mdl_ind.mcl_handle = p_mcb->mcl_handle;
+        evt_data.delete_mdl_ind.app_handle = p_acb->app_handle;
+        evt_data.delete_mdl_ind.mdl_id = p_delete_ind->mdl_id;
+        p_acb->p_cback(BTA_HL_DELETE_MDL_IND_EVT,(tBTA_HL *) &evt_data );
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_api_dch_abort
+**
+** Description      Process the API DCH abort request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_hl_api_dch_abort(tBTA_HL_CB *p_cb, tBTA_HL_DATA *p_data)
+{
+
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    UINT8           app_idx, mcl_idx, mdl_idx;
+    tBTA_HL_APP_CB  *p_acb;
+    tBTA_HL_MCL_CB  *p_mcb;
+    tBTA_HL_MDL_CB  *p_dcb;
+    tBTA_HL         evt_data;
+
+
+    if (bta_hl_find_mcl_idx_using_handle(p_data->api_dch_abort.mcl_handle, &app_idx, &mcl_idx ))
+    {
+
+        if (!bta_hl_find_dch_setup_mdl_idx(app_idx, mcl_idx, &mdl_idx ))
+        {
+            status = BTA_HL_STATUS_NO_MDL_ID_FOUND;
+        }
+        else
+        {
+            p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+            if (p_dcb->abort_oper)
+            {
+                /* abort already in progress*/
+                status = BTA_HL_STATUS_FAIL;
+            }
+            else
+            {
+                p_dcb->abort_oper = BTA_HL_ABORT_LOCAL_MASK;
+            }
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_INVALID_MCL_HANDLE;
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+    if (status != BTA_HL_STATUS_OK)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_api_dch_abort status=%s", bta_hl_status_code(status));
+    }
+#endif
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ABORT_EVT, p_data);
+            break;
+        case BTA_HL_STATUS_NO_MDL_ID_FOUND:
+        case BTA_HL_STATUS_FAIL:
+
+            p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+            bta_hl_build_abort_cfm(&evt_data,
+                                   p_acb->app_handle,
+                                   p_mcb->mcl_handle,
+                                   BTA_HL_STATUS_FAIL);
+            p_acb->p_cback(BTA_HL_DCH_ABORT_CFM_EVT,(tBTA_HL *) &evt_data );
+            break;
+        case BTA_HL_STATUS_INVALID_BD_ADDR:
+        case BTA_HL_STATUS_INVALID_APP_HANDLE:
+        default:
+            APPL_TRACE_ERROR1("Status code=%d", status);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_hdl_event
+**
+** Description      HL main event handling function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_hl_hdl_event(BT_HDR *p_msg)
+{
+    UINT8 app_idx, mcl_idx, mdl_idx;
+    BOOLEAN success = TRUE;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("BTA HL Event Handler: Event [%s]",
+                      bta_hl_evt_code(p_msg->event));
+#endif
+
+    switch (p_msg->event)
+    {
+        case BTA_HL_API_ENABLE_EVT:
+            bta_hl_api_enable(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DISABLE_EVT:
+            bta_hl_api_disable(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_REGISTER_EVT:
+            bta_hl_api_register(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DEREGISTER_EVT:
+            bta_hl_api_deregister(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_CCH_OPEN_EVT:
+            bta_hl_api_cch_open(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_CCH_CLOSE_EVT:
+            bta_hl_api_cch_close(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DCH_OPEN_EVT:
+            bta_hl_api_dch_open(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DCH_CLOSE_EVT:
+            bta_hl_api_dch_close(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DELETE_MDL_EVT:
+            bta_hl_api_delete_mdl(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DCH_RECONNECT_EVT:
+            bta_hl_api_dch_reconnect(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+        case BTA_HL_API_DCH_ECHO_TEST_EVT:
+            bta_hl_api_dch_echo_test(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+        case BTA_HL_API_SDP_QUERY_EVT:
+            bta_hl_api_sdp_query(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+        case BTA_HL_MCA_DELETE_CFM_EVT:
+            bta_hl_mca_delete_mdl_cfm(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+        case BTA_HL_MCA_DELETE_IND_EVT:
+            bta_hl_mca_delete_mdl_ind(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+        case BTA_HL_SDP_QUERY_OK_EVT:
+        case BTA_HL_SDP_QUERY_FAIL_EVT:
+            bta_hl_sdp_query_results(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+        case BTA_HL_API_DCH_ABORT_EVT:
+            bta_hl_api_dch_abort(&bta_hl_cb, (tBTA_HL_DATA *) p_msg);
+            break;
+
+
+        default:
+            if (p_msg->event < BTA_HL_DCH_EVT_MIN)
+            {
+                if (bta_hl_find_cch_cb_indexes((tBTA_HL_DATA *) p_msg, &app_idx, &mcl_idx))
+                {
+                    bta_hl_cch_sm_execute( app_idx,
+                                           mcl_idx,
+                                           p_msg->event, (tBTA_HL_DATA *) p_msg);
+                }
+                else
+                {
+#if BTA_HL_DEBUG == TRUE
+                    APPL_TRACE_ERROR1("unable to find control block indexes for CCH: [event=%s]",
+                                      bta_hl_evt_code(p_msg->event));
+#else
+                    APPL_TRACE_ERROR1("unable to find control block indexes for CCH: [event=%d]", p_msg->event);
+#endif
+                    success = FALSE;
+                }
+            }
+            else
+            {
+                if (bta_hl_find_dch_cb_indexes((tBTA_HL_DATA *) p_msg, &app_idx, &mcl_idx, &mdl_idx))
+                {
+                    bta_hl_dch_sm_execute( app_idx,
+                                           mcl_idx,
+                                           mdl_idx,
+                                           p_msg->event, (tBTA_HL_DATA *) p_msg);
+                }
+                else
+                {
+
+#if BTA_HL_DEBUG == TRUE
+                    APPL_TRACE_ERROR1("unable to find control block indexes for DCH : [event=%s]",
+                                      bta_hl_evt_code(p_msg->event));
+#else
+                    APPL_TRACE_ERROR1("unable to find control block indexes for DCH: [event=%d]", p_msg->event);
+#endif
+                    success = FALSE;
+                }
+            }
+
+            break;
+    }
+
+    return(success);
+}
+
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if (BTA_HL_DEBUG == TRUE) && (BT_USE_TRACES == TRUE)
+
+/*******************************************************************************
+**
+** Function         bta_hl_cch_state_code
+**
+** Description      Map CCH state code to the corresponding state string
+**
+** Returns          string pointer for the associated state name
+**
+*******************************************************************************/
+static char *bta_hl_cch_state_code(tBTA_HL_CCH_STATE state_code)
+{
+    switch (state_code)
+    {
+        case BTA_HL_CCH_IDLE_ST:
+            return "BTA_HL_CCH_IDLE_ST";
+        case BTA_HL_CCH_OPENING_ST:
+            return "BTA_HL_CCH_OPENING_ST";
+        case BTA_HL_CCH_OPEN_ST:
+            return "BTA_HL_CCH_OPEN_ST";
+        case BTA_HL_CCH_CLOSING_ST:
+            return "BTA_HL_CCH_CLOSING_ST";
+        default:
+            return "Unknown CCH state code";
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_dch_state_code
+**
+** Description      Map DCH state code to the corresponding state string
+**
+** Returns          string pointer for the associated state name
+**
+*******************************************************************************/
+static char *bta_hl_dch_state_code(tBTA_HL_DCH_STATE state_code)
+{
+    switch (state_code)
+    {
+        case BTA_HL_DCH_IDLE_ST:
+            return "BTA_HL_DCH_IDLE_ST";
+        case BTA_HL_DCH_OPENING_ST:
+            return "BTA_HL_DCH_OPENING_ST";
+        case BTA_HL_DCH_OPEN_ST:
+            return "BTA_HL_DCH_OPEN_ST";
+        case BTA_HL_DCH_CLOSING_ST:
+            return "BTA_HL_DCH_CLOSING_ST";
+        default:
+            return "Unknown DCH state code";
+    }
+}
+#endif  /* Debug Functions */
+#endif /* HL_INCLUDED */
diff --git a/bta/hl/bta_hl_sdp.c b/bta/hl/bta_hl_sdp.c
new file mode 100644
index 0000000..15620e8
--- /dev/null
+++ b/bta/hl/bta_hl_sdp.c
@@ -0,0 +1,436 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1998-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE)
+
+#include "sdp_api.h"
+#include "bta_hl_int.h"
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_fill_sup_feature_list
+**
+** Description      Fill the supported features from teh SDP record
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+BOOLEAN bta_hl_fill_sup_feature_list( const tSDP_DISC_ATTR  *p_attr,
+                                      tBTA_HL_SUP_FEATURE_LIST_ELEM *p_list)
+{
+    tSDP_DISC_ATTR  *p_sattr;
+    UINT8           seq_len, item_cnt;
+    UINT8           list_cnt=0;
+    BOOLEAN         status=TRUE;
+
+    for (p_attr = p_attr->attr_value.v.p_sub_attr; p_attr; p_attr = p_attr->p_next_attr)
+    {
+        /* mdep sequence */
+        if (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) != DATA_ELE_SEQ_DESC_TYPE)
+        {
+            return(FALSE);
+        }
+        seq_len =SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+        item_cnt=0;
+
+        for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr && (item_cnt < 4) ; p_sattr = p_sattr->p_next_attr)
+        {
+            /* for each mdep list */
+
+            p_list->list_elem[list_cnt].p_mdep_desp = NULL;
+            switch (item_cnt)
+            {
+                case 0:
+                    p_list->list_elem[list_cnt].mdep_id = p_sattr->attr_value.v.u8;
+                    break;
+                case 1:
+                    p_list->list_elem[list_cnt].data_type = p_sattr->attr_value.v.u16;
+                    break;
+                case 2:
+                    p_list->list_elem[list_cnt].mdep_role = (tBTA_HL_MDEP_ROLE) p_sattr->attr_value.v.u8;
+                    break;
+                case 3:
+                    p_list->list_elem[list_cnt].p_mdep_desp    = (char *) p_sattr->attr_value.v.array;
+                    break;
+            }
+
+            item_cnt++;
+        }
+        list_cnt++;
+    }
+    p_list->num_elems = list_cnt;
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_compose_supported_feature_list
+**
+** Description      This function is called to compose a data sequence from
+**                  the supported  feature element list struct pointer
+**
+** Returns          the length of the data sequence
+**
+*******************************************************************************/
+int bta_hl_compose_supported_feature_list( UINT8 *p, UINT16 num_elem,
+                                           const tBTA_HL_SUP_FEATURE_ELEM *p_elem_list)
+{
+    UINT16          xx, str_len, seq_len;
+    UINT8           *p_head = p;
+
+    for (xx = 0; xx < num_elem; xx++, p_elem_list++)
+    {
+        UINT8_TO_BE_STREAM  (p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+        seq_len=7;
+        str_len=0;
+        if (p_elem_list->p_mdep_desp)
+        {
+            str_len = strlen(p_elem_list->p_mdep_desp)+1;
+            seq_len += str_len+2; /* todo add a # symbol for 2 */
+        }
+
+        *p++ = (UINT8) seq_len;
+
+        UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_ONE_BYTE);
+        UINT8_TO_BE_STREAM  (p, p_elem_list->mdep_id);
+        UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+        UINT16_TO_BE_STREAM (p, p_elem_list->data_type);
+        UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_ONE_BYTE);
+        UINT8_TO_BE_STREAM  (p, p_elem_list->mdep_role);
+
+        if (str_len)
+        {
+            UINT8_TO_BE_STREAM  (p, (TEXT_STR_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+            UINT8_TO_BE_STREAM  (p, str_len);
+            ARRAY_TO_BE_STREAM(p, p_elem_list->p_mdep_desp, str_len);
+        }
+    }
+
+    return(p - p_head);
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_add_sup_feature_list
+**
+** Description      This function is called to add a protocol descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the protocol list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN bta_hl_add_sup_feature_list (UINT32 handle, UINT16 num_elem,
+                                     const tBTA_HL_SUP_FEATURE_ELEM *p_elem_list)
+{
+    UINT8       *p_buf;
+    int         offset;
+    BOOLEAN     result = FALSE;
+
+    if ((p_buf = (UINT8 *)GKI_getbuf(BTA_HL_SUP_FEATURE_SDP_BUF_SIZE)) != NULL)
+    {
+        offset = bta_hl_compose_supported_feature_list(p_buf, num_elem, p_elem_list);
+        result = SDP_AddAttribute (handle, ATTR_ID_HDP_SUP_FEAT_LIST,
+                                   DATA_ELE_SEQ_DESC_TYPE, (UINT32) offset, p_buf);
+        GKI_freebuf(p_buf);
+    }
+    return result;
+}
+/*****************************************************************************
+**
+**  Function:    bta_hl_sdp_register
+**
+**  Purpose:     Register an HDP application with SDP
+**
+**  Parameters:  p_cb           - Pointer to MA instance control block
+**               p_service_name - MA server name
+**               inst_id        - MAS instance ID
+**               msg_type       - Supported message type(s)
+**
+**
+**  Returns:     void
+**
+*****************************************************************************/
+tBTA_HL_STATUS bta_hl_sdp_register (UINT8 app_idx)
+{
+    UINT16                          svc_class_id_list[BTA_HL_NUM_SVC_ELEMS];
+    tSDP_PROTOCOL_ELEM              proto_elem_list[BTA_HL_NUM_PROTO_ELEMS];
+    tSDP_PROTO_LIST_ELEM            add_proto_list;
+    tBTA_HL_SUP_FEATURE_LIST_ELEM   sup_feature_list;
+    UINT16                          browse_list[] = {UUID_SERVCLASS_PUBLIC_BROWSE_GROUP};
+    UINT8                           i,j, cnt,mdep_id, mdep_role;
+    UINT8                           data_exchange_spec = BTA_HL_SDP_IEEE_11073_20601;
+    UINT8                           mcap_sup_proc = BTA_HL_MCAP_SUP_PROC_MASK;
+    UINT16                          profile_uuid = UUID_SERVCLASS_HDP_PROFILE;
+    UINT16                          version = BTA_HL_VERSION_01_00;
+    UINT8                           num_services=1;
+    tBTA_HL_APP_CB                  *p_cb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    BOOLEAN                         result = TRUE;
+    tBTA_HL_STATUS                  status = BTA_HL_STATUS_OK;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_sdp_register app_idx=%d",app_idx);
+#endif
+
+    if ((p_cb->sup_feature.app_role_mask == BTA_HL_MDEP_ROLE_MASK_SOURCE) &&
+        (!p_cb->sup_feature.advertize_source_sdp))
+    {
+        return BTA_HL_STATUS_OK;
+    }
+
+    if ((p_cb->sdp_handle  = SDP_CreateRecord()) == 0)
+    {
+        return BTA_HL_STATUS_SDP_NO_RESOURCE;
+    }
+
+    num_services=1;
+    svc_class_id_list[0]= UUID_SERVCLASS_HDP_SOURCE;
+    if (p_cb->sup_feature.app_role_mask == BTA_HL_MDEP_ROLE_MASK_SINK)
+    {
+        svc_class_id_list[0]= UUID_SERVCLASS_HDP_SINK;
+    }
+    else
+    {
+        if (p_cb->sup_feature.app_role_mask != BTA_HL_MDEP_ROLE_MASK_SOURCE)
+        {
+            /* dual role */
+            num_services=2;
+            svc_class_id_list[1]= UUID_SERVCLASS_HDP_SINK;
+        }
+    }
+    result &= SDP_AddServiceClassIdList(p_cb->sdp_handle, num_services, svc_class_id_list);
+
+    if (result)
+    {
+        /* add the protocol element sequence */
+        proto_elem_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        proto_elem_list[0].num_params = 1;
+        proto_elem_list[0].params[0] = p_cb->ctrl_psm;
+        proto_elem_list[1].protocol_uuid = UUID_PROTOCOL_MCAP_CTRL;
+        proto_elem_list[1].num_params = 1;
+        proto_elem_list[1].params[0] = version;
+        result &= SDP_AddProtocolList(p_cb->sdp_handle, BTA_HL_NUM_PROTO_ELEMS, proto_elem_list);
+
+        result &= SDP_AddProfileDescriptorList(p_cb->sdp_handle, profile_uuid, version);
+    }
+
+    if (result)
+    {
+        add_proto_list.num_elems = BTA_HL_NUM_ADD_PROTO_ELEMS;
+        add_proto_list.list_elem[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        add_proto_list.list_elem[0].num_params = 1;
+        add_proto_list.list_elem[0].params[0] = p_cb->data_psm;
+        add_proto_list.list_elem[1].protocol_uuid = UUID_PROTOCOL_MCAP_DATA;
+        add_proto_list.list_elem[1].num_params = 0;
+        result &= SDP_AddAdditionProtoLists(p_cb->sdp_handle, BTA_HL_NUM_ADD_PROTO_LISTS,
+                                            (tSDP_PROTO_LIST_ELEM *)&add_proto_list);
+    }
+
+    if (result)
+    {
+        if (p_cb->srv_name[0] )
+        {
+            result &= SDP_AddAttribute(p_cb->sdp_handle,
+                                       (UINT16)ATTR_ID_SERVICE_NAME,
+                                       (UINT8)TEXT_STR_DESC_TYPE,
+                                       (UINT32)(strlen(p_cb->srv_name) + 1),
+                                       (UINT8 *)p_cb->srv_name);
+        } /* end of setting optional service name */
+    }
+
+    if (result)
+    {
+        if (p_cb->srv_desp[0] )
+        {
+            result &= SDP_AddAttribute(p_cb->sdp_handle,
+                                       (UINT16)ATTR_ID_SERVICE_DESCRIPTION,
+                                       (UINT8)TEXT_STR_DESC_TYPE,
+                                       (UINT32)(strlen(p_cb->srv_desp) + 1),
+                                       (UINT8 *)p_cb->srv_desp);
+
+        } /* end of setting optional service description */
+
+    }
+
+    if (result)
+    {
+        if (p_cb->provider_name[0] )
+        {
+            result &= SDP_AddAttribute(p_cb->sdp_handle,
+                                       (UINT16)ATTR_ID_PROVIDER_NAME,
+                                       (UINT8)TEXT_STR_DESC_TYPE,
+                                       (UINT32)(strlen(p_cb->provider_name) + 1),
+                                       (UINT8 *)p_cb->provider_name);
+        } /* end of setting optional provider name */
+    }
+
+    /* add supported feture list */
+
+    if (result)
+    {
+        cnt=0;
+        for (i=1; i<= p_cb->sup_feature.num_of_mdeps; i++)
+        {
+            mdep_id = (UINT8)p_cb->sup_feature.mdep[i].mdep_id;
+            mdep_role = (UINT8)p_cb->sup_feature.mdep[i].mdep_cfg.mdep_role;
+
+            for (j=0; j<p_cb->sup_feature.mdep[i].mdep_cfg.num_of_mdep_data_types; j++)
+            {
+                sup_feature_list.list_elem[cnt].mdep_id = mdep_id;
+                sup_feature_list.list_elem[cnt].mdep_role = mdep_role;
+                sup_feature_list.list_elem[cnt].data_type = p_cb->sup_feature.mdep[i].mdep_cfg.data_cfg[j].data_type;
+                if (p_cb->sup_feature.mdep[i].mdep_cfg.data_cfg[j].desp[0] != '\0')
+                {
+                    sup_feature_list.list_elem[cnt].p_mdep_desp = p_cb->sup_feature.mdep[i].mdep_cfg.data_cfg[j].desp;
+                }
+                else
+                {
+                    sup_feature_list.list_elem[cnt].p_mdep_desp = NULL;
+                }
+
+                cnt++;
+                if (cnt>BTA_HL_NUM_SUP_FEATURE_ELEMS)
+                {
+                    result = FALSE;
+                    break;
+                }
+            }
+        }
+        sup_feature_list.num_elems = cnt;
+        result &=   bta_hl_add_sup_feature_list (p_cb->sdp_handle,
+                                                 sup_feature_list.num_elems,
+                                                 sup_feature_list.list_elem);
+    }
+    if (result)
+    {
+        result &= SDP_AddAttribute(p_cb->sdp_handle, ATTR_ID_HDP_DATA_EXCH_SPEC, UINT_DESC_TYPE,
+                                   (UINT32)1, (UINT8*)&data_exchange_spec);
+    }
+
+    if (result)
+    {
+
+        result &= SDP_AddAttribute(p_cb->sdp_handle, ATTR_ID_HDP_MCAP_SUP_PROC, UINT_DESC_TYPE,
+                                   (UINT32)1, (UINT8*)&mcap_sup_proc);
+    }
+
+    if (result)
+    {
+        result &= SDP_AddUuidSequence(p_cb->sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, browse_list);
+    }
+
+    if (result)
+    {
+        for(i=0; i < num_services; i++)
+        {
+            bta_sys_add_uuid(svc_class_id_list[i]);
+            APPL_TRACE_DEBUG2("dbg bta_sys_add_uuid i=%d uuid=0x%x", i, svc_class_id_list[i]); //todo
+        }
+    }
+    else
+    {
+        if (p_cb->sdp_handle)
+        {
+            SDP_DeleteRecord(p_cb->sdp_handle);
+            p_cb->sdp_handle = 0;
+        }
+        status = BTA_HL_STATUS_SDP_FAIL;
+    }
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_sdp_register status=%s", bta_hl_status_code(status));
+#endif
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_find_sink_or_src_srv_class_in_db
+**
+** Description      This function queries an SDP database for either a HDP Sink or
+**                  Source service class ID.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_REC *bta_hl_find_sink_or_src_srv_class_in_db (const tSDP_DISCOVERY_DB *p_db,
+                                                        const tSDP_DISC_REC *p_start_rec)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_REC   *p_rec;
+    tSDP_DISC_ATTR  *p_attr, *p_sattr;
+
+    /* Must have a valid database */
+    if (p_db == NULL)
+        return(NULL);
+
+
+    if (!p_start_rec)
+    {
+
+        p_rec = p_db->p_first_rec;
+    }
+    else
+    {
+        p_rec = p_start_rec->p_next_rec;
+    }
+
+    while (p_rec)
+    {
+        p_attr = p_rec->p_first_attr;
+        while (p_attr)
+        {
+            if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+                && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+            {
+                for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+                    if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                        && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)
+                        && ( (p_sattr->attr_value.v.u16 == UUID_SERVCLASS_HDP_SINK) ||
+                             (p_sattr->attr_value.v.u16 == UUID_SERVCLASS_HDP_SOURCE)) )
+                    {
+                        return(p_rec);
+                    }
+                }
+                break;
+            }
+
+            p_attr = p_attr->p_next_attr;
+        }
+
+        p_rec = p_rec->p_next_rec;
+    }
+#endif
+    /* If here, no matching UUID found */
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_find_sink_or_src_srv_class_in_db failed");
+#endif
+
+    return(NULL);
+}
+#endif /* HL_INCLUDED */
diff --git a/bta/hl/bta_hl_utils.c b/bta/hl/bta_hl_utils.c
new file mode 100644
index 0000000..7f94a9c
--- /dev/null
+++ b/bta/hl/bta_hl_utils.c
@@ -0,0 +1,3337 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file implements utility functions for the HeaLth device profile
+ *  (HL).
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "bt_target.h"
+#if defined(HL_INCLUDED) && (HL_INCLUDED == TRUE)
+
+
+#include "gki.h"
+#include "utl.h"
+#include "bd.h"
+#include "bta_fs_api.h"
+#include "bta_hl_int.h"
+#include "bta_hl_co.h"
+#include "mca_defs.h"
+#include "mca_api.h"
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_ctrl_psm_for_dch
+**
+** Description    This function set the control PSM for the DCH setup
+**
+** Returns     BOOLEAN - TRUE - control PSM setting is successful
+*******************************************************************************/
+BOOLEAN bta_hl_set_ctrl_psm_for_dch(UINT8 app_idx, UINT8 mcl_idx,
+                                    UINT8 mdl_idx, UINT16 ctrl_psm)
+{
+    tBTA_HL_MCL_CB *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN success = TRUE, update_ctrl_psm = FALSE;
+
+    if (p_mcb->sdp.num_recs)
+    {
+        if (p_mcb->ctrl_psm != ctrl_psm)
+        {
+            /* can not use a different ctrl PSM than the current one*/
+            success = FALSE;
+        }
+    }
+    else
+    {
+        /* No SDP info control i.e. channel was opened by the peer */
+        update_ctrl_psm = TRUE;
+    }
+
+    if (success && update_ctrl_psm)
+    {
+        p_mcb->ctrl_psm = ctrl_psm;
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+    if (!success)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_set_ctrl_psm_for_dch num_recs=%d success=%d update_ctrl_psm=%d ctrl_psm=0x%x ",
+                          p_mcb->sdp.num_recs, success, update_ctrl_psm, ctrl_psm );
+    }
+#endif
+
+    return success;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_sdp_idx_using_ctrl_psm
+**
+** Description
+**
+** Returns      UINT8 pool_id
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_sdp_idx_using_ctrl_psm(tBTA_HL_SDP *p_sdp,
+                                           UINT16 ctrl_psm,
+                                           UINT8 *p_sdp_idx)
+{
+    BOOLEAN found=FALSE;
+    tBTA_HL_SDP_REC     *p_rec;
+    UINT8 i;
+
+    if (ctrl_psm != 0)
+    {
+        for (i=0; i<p_sdp->num_recs; i++)
+        {
+            p_rec = &p_sdp->sdp_rec[i];
+            if (p_rec->ctrl_psm == ctrl_psm)
+            {
+                *p_sdp_idx = i;
+                found = TRUE;
+                break;
+            }
+        }
+    }
+    else
+    {
+        *p_sdp_idx = 0;
+        found = TRUE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_sdp_idx_using_ctrl_psm found=%d sdp_idx=%d ctrl_psm=0x%x ",
+                          found, *p_sdp_idx, ctrl_psm );
+    }
+#endif
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_user_tx_pool_id
+**
+** Description  This function sets the user tx pool id
+**
+** Returns      UINT8 pool_id
+**
+*******************************************************************************/
+
+UINT8 bta_hl_set_user_tx_pool_id(UINT16 max_tx_size)
+{
+    UINT8 pool_id;
+
+    if (max_tx_size > GKI_get_pool_bufsize (OBX_FCR_TX_POOL_ID))
+    {
+        pool_id = BTA_HL_LRG_DATA_POOL_ID;
+    }
+    else
+    {
+        pool_id = L2CAP_DEFAULT_ERM_POOL_ID;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG3("bta_hl_set_user_rx_pool_id pool_id=%d max_tx_size=%d default_ertm_pool_size=%d",
+                      pool_id, max_tx_size, GKI_get_pool_bufsize (OBX_FCR_TX_POOL_ID));
+#endif
+
+    return pool_id;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_user_rx_pool_id
+**
+** Description  This function sets the user trx pool id
+**
+** Returns      UINT8 pool_id
+**
+*******************************************************************************/
+
+UINT8 bta_hl_set_user_rx_pool_id(UINT16 mtu)
+{
+    UINT8 pool_id;
+
+    if (mtu > GKI_get_pool_bufsize (OBX_FCR_RX_POOL_ID))
+    {
+        pool_id = BTA_HL_LRG_DATA_POOL_ID;
+    }
+    else
+    {
+        pool_id = L2CAP_DEFAULT_ERM_POOL_ID;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG3("bta_hl_set_user_rx_pool_id pool_id=%d mtu=%d default_ertm_pool_size=%d",
+                      pool_id, mtu, GKI_get_pool_bufsize (OBX_FCR_RX_POOL_ID));
+#endif
+
+    return pool_id;
+}
+
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_tx_win_size
+**
+** Description  This function sets the tx window size
+**
+** Returns      UINT8 tx_win_size
+**
+*******************************************************************************/
+UINT8 bta_hl_set_tx_win_size(UINT16 mtu, UINT16 mps)
+{
+    UINT8 tx_win_size;
+
+    if (mtu <= mps)
+    {
+        tx_win_size =1;
+    }
+    else
+    {
+        if (mps > 0)
+        {
+            tx_win_size = (mtu/mps)+1;
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("The MPS is zero");
+            tx_win_size = 10;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG3("bta_hl_set_tx_win_size win_size=%d mtu=%d mps=%d",
+                      tx_win_size, mtu, mps);
+#endif
+    return tx_win_size;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_mps
+**
+** Description  This function sets the MPS
+**
+** Returns      UINT16 MPS
+**
+*******************************************************************************/
+UINT16 bta_hl_set_mps(UINT16 mtu)
+{
+    UINT16 mps;
+    if (mtu > BTA_HL_L2C_MPS)
+    {
+        mps = BTA_HL_L2C_MPS;
+    }
+    else
+    {
+        mps = mtu;
+    }
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG2("bta_hl_set_mps mps=%d mtu=%d",
+                      mps, mtu);
+#endif
+    return mps;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_clean_mdl_cb
+**
+** Description  This function clean up the specified MDL control block
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_hl_clean_mdl_cb(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx)
+{
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG3("bta_hl_clean_mdl_cb app_idx=%d mcl_idx=%d mdl_idx=%d",
+                      app_idx, mcl_idx, mdl_idx);
+#endif
+    utl_freebuf((void **) &p_dcb->p_tx_pkt);
+    utl_freebuf((void **) &p_dcb->p_rx_pkt);
+    utl_freebuf((void **) &p_dcb->p_echo_tx_pkt);
+    utl_freebuf((void **) &p_dcb->p_echo_rx_pkt);
+
+    memset((void *)p_dcb, 0 , sizeof(tBTA_HL_MDL_CB));
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_get_buf
+**
+** Description  This function allocate a buffer based on the specified data size
+**
+** Returns      BT_HDR *.
+**
+*******************************************************************************/
+BT_HDR * bta_hl_get_buf(UINT16 data_size)
+{
+    BT_HDR *p_new;
+    UINT16 size = data_size + L2CAP_MIN_OFFSET + BT_HDR_SIZE;
+
+    if (size < GKI_MAX_BUF_SIZE)
+    {
+        p_new = (BT_HDR *)GKI_getbuf(size);
+    }
+    else
+    {
+        p_new = (BT_HDR *) GKI_getpoolbuf(BTA_HL_LRG_DATA_POOL_ID);
+    }
+
+    if (p_new)
+    {
+        p_new->len = data_size;
+        p_new->offset = L2CAP_MIN_OFFSET;
+    }
+
+    return p_new;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_service_in_db
+**
+** Description  This function check the specified service class(es) can be find in
+**              the received SDP database
+**
+** Returns      BOOLEAN TRUE - found
+**                      FALSE - not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_service_in_db( UINT8 app_idx, UINT8 mcl_idx,
+                                   UINT16 service_uuid,
+                                   tSDP_DISC_REC **pp_rec )
+{
+    tBTA_HL_MCL_CB          *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found = TRUE;
+
+    switch (service_uuid)
+    {
+        case UUID_SERVCLASS_HDP_SINK:
+        case UUID_SERVCLASS_HDP_SOURCE:
+            if ((*pp_rec = SDP_FindServiceInDb(p_mcb->p_db, service_uuid,
+                                               *pp_rec)) == NULL)
+            {
+                found = FALSE;
+            }
+            break;
+        default:
+            if (((*pp_rec = bta_hl_find_sink_or_src_srv_class_in_db(p_mcb->p_db,
+                                                                    *pp_rec)) == NULL))
+            {
+                found = FALSE;
+            }
+            break;
+    }
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_get_service_uuids
+**
+**
+** Description  This function finds the service class(es) for both CCH and DCH oeprations
+**
+** Returns      UINT16 - service_id
+**                       if service_uuid = 0xFFFF then it means service uuid
+**                       can be either Sink or Source
+**
+*******************************************************************************/
+UINT16 bta_hl_get_service_uuids(UINT8 sdp_oper, UINT8 app_idx, UINT8 mcl_idx,
+                                UINT8 mdl_idx )
+{
+    tBTA_HL_MDL_CB          *p_dcb;
+    UINT16                  service_uuid = 0xFFFF; /* both Sink and Source */
+
+    switch (sdp_oper)
+    {
+
+        case BTA_HL_SDP_OP_DCH_OPEN_INIT:
+        case BTA_HL_SDP_OP_DCH_RECONNECT_INIT:
+            p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+            if (p_dcb->local_mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+            {
+                if (p_dcb->peer_mdep_role == BTA_HL_MDEP_ROLE_SINK)
+                {
+                    service_uuid = UUID_SERVCLASS_HDP_SINK;
+                }
+                else
+                {
+                    service_uuid = UUID_SERVCLASS_HDP_SOURCE;
+                }
+            }
+            break;
+        case BTA_HL_SDP_OP_CCH_INIT:
+        default:
+            /* use default that is both Sink and Source */
+            break;
+    }
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_get_service_uuids service_uuid=0x%x",service_uuid );
+#endif
+    return service_uuid;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_echo_cfg_rsp
+**
+**
+** Description  This function finds the configuration response for the echo test
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_echo_cfg_rsp(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdep_idx, UINT8 cfg,
+                                 UINT8 *p_cfg_rsp)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MDEP        *p_mdep= &p_acb->sup_feature.mdep[mdep_idx];
+    BOOLEAN             status =TRUE;
+
+    if (p_mdep->mdep_id == BTA_HL_ECHO_TEST_MDEP_ID)
+    {
+        if ((cfg == BTA_HL_DCH_CFG_RELIABLE) || (cfg == BTA_HL_DCH_CFG_STREAMING))
+        {
+            *p_cfg_rsp = cfg;
+        }
+        else if (cfg == BTA_HL_DCH_CFG_NO_PREF )
+        {
+            *p_cfg_rsp = BTA_HL_DEFAULT_ECHO_TEST_SRC_DCH_CFG;
+        }
+        else
+        {
+            status = FALSE;
+            APPL_TRACE_ERROR0("Inavlid echo cfg value");
+        }
+        return status;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!status)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_find_echo_cfg_rsp status=failed app_idx=%d mcl_idx=%d mdep_idx=%d cfg=%d",
+                          app_idx, mcl_idx, mdep_idx, cfg);
+    }
+#endif
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_validate_dch_cfg
+**
+** Description  This function validate the DCH configuration
+**
+** Returns      BOOLEAN - TRUE cfg is valid
+**                        FALSE not valid
+**
+*******************************************************************************/
+BOOLEAN bta_hl_validate_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                            UINT8 cfg)
+{
+    tBTA_HL_MDL_CB      *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    BOOLEAN is_valid =FALSE;
+
+
+    if (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx) &&
+        (cfg != BTA_HL_DCH_CFG_RELIABLE))
+    {
+        APPL_TRACE_ERROR0("the first DCH should be a reliable channel");
+        return is_valid;
+    }
+
+    switch (p_dcb->local_cfg)
+    {
+        case BTA_HL_DCH_CFG_NO_PREF:
+
+            if ((cfg == BTA_HL_DCH_CFG_RELIABLE) || (cfg == BTA_HL_DCH_CFG_STREAMING))
+            {
+                is_valid = TRUE;
+            }
+            break;
+        case BTA_HL_DCH_CFG_RELIABLE:
+        case BTA_HL_DCH_CFG_STREAMING:
+            if (p_dcb->local_cfg == cfg )
+            {
+                is_valid = TRUE;
+            }
+            break;
+        default:
+            break;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!is_valid)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_validate_dch_open_cfg is_valid=%d, cfg=%d", is_valid, cfg );
+    }
+#endif
+    return is_valid;
+}
+
+/*******************************************************************************
+**
+** Function       bta_hl_find_cch_cb_indexes
+**
+** Description  This function finds the indexes needed for the CCH state machine
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_cch_cb_indexes(tBTA_HL_DATA *p_msg,
+                                   UINT8 *p_app_idx,
+                                   UINT8  *p_mcl_idx)
+{
+    BOOLEAN found = FALSE;
+    tBTA_HL_MCL_CB      *p_mcb;
+    UINT8               app_idx, mcl_idx;
+
+    switch (p_msg->hdr.event)
+    {
+        case BTA_HL_CCH_SDP_OK_EVT:
+        case BTA_HL_CCH_SDP_FAIL_EVT:
+            app_idx = p_msg->cch_sdp.app_idx;
+            mcl_idx = p_msg->cch_sdp.mcl_idx;
+            found = TRUE;
+            break;
+
+        case BTA_HL_MCA_CONNECT_IND_EVT:
+
+            if (bta_hl_find_app_idx_using_handle(p_msg->mca_evt.app_handle, &app_idx))
+            {
+                if (bta_hl_find_mcl_idx(app_idx, p_msg->mca_evt.mca_data.connect_ind.bd_addr, &mcl_idx))
+                {
+                    /* local initiated */
+                    found = TRUE;
+                }
+                else if (!bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx)&&
+                         bta_hl_find_avail_mcl_idx(app_idx, &mcl_idx))
+                {
+                    /* remote initiated */
+                    p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                    p_mcb->in_use = TRUE;
+                    p_mcb->cch_oper = BTA_HL_CCH_OP_REMOTE_OPEN;
+                    found = TRUE;
+                }
+            }
+            break;
+
+        case BTA_HL_MCA_DISCONNECT_IND_EVT:
+
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx,  &mcl_idx))
+            {
+                found = TRUE;
+            }
+            else if (bta_hl_find_app_idx_using_handle(p_msg->mca_evt.app_handle, &app_idx) &&
+                     bta_hl_find_mcl_idx(app_idx, p_msg->mca_evt.mca_data.disconnect_ind.bd_addr, &mcl_idx))
+            {
+                found = TRUE;
+            }
+
+            if (found)
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                if (p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_CLOSE)
+                {
+                    p_mcb->cch_oper = BTA_HL_CCH_OP_REMOTE_CLOSE;
+                }
+            }
+            break;
+
+        case BTA_HL_MCA_RSP_TOUT_IND_EVT:
+
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx,  &mcl_idx))
+            {
+                found = TRUE;
+            }
+
+            if (found)
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                if (p_mcb->cch_oper != BTA_HL_CCH_OP_REMOTE_CLOSE)
+                {
+                    p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_CLOSE;
+                }
+            }
+            break;
+        default:
+            break;
+    }
+
+
+    if (found)
+    {
+        *p_app_idx = app_idx;
+        *p_mcl_idx = mcl_idx;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_find_cch_cb_indexes event=%s found=%d app_idx=%d mcl_idx=%d",
+                          bta_hl_evt_code(p_msg->hdr.event), found, app_idx, mcl_idx);
+    }
+#endif
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function       bta_hl_find_dch_cb_indexes
+**
+** Description  This function finds the indexes needed for the DCH state machine
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_dch_cb_indexes(tBTA_HL_DATA *p_msg,
+                                   UINT8 *p_app_idx,
+                                   UINT8 *p_mcl_idx,
+                                   UINT8 *p_mdl_idx)
+{
+    BOOLEAN         found = FALSE;
+    tBTA_HL_MCL_CB  *p_mcb;
+    UINT8           app_idx, mcl_idx, mdl_idx;
+
+    switch (p_msg->hdr.event)
+    {
+        case BTA_HL_MCA_CREATE_CFM_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,  p_msg->mca_evt.mca_data.create_cfm.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+
+        case BTA_HL_MCA_CREATE_IND_EVT:
+        case BTA_HL_MCA_RECONNECT_IND_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_avail_mdl_idx( app_idx,  mcl_idx, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+
+        case BTA_HL_MCA_OPEN_CFM_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,  p_msg->mca_evt.mca_data.open_cfm.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+
+        case BTA_HL_MCA_OPEN_IND_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,  p_msg->mca_evt.mca_data.open_ind.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+
+        case BTA_HL_MCA_CLOSE_CFM_EVT:
+
+            if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.close_cfm.mdl,
+                                                 &app_idx, &mcl_idx, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_MCA_CLOSE_IND_EVT:
+
+            if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.close_ind.mdl,
+                                                 &app_idx, &mcl_idx, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_API_SEND_DATA_EVT:
+
+            if (bta_hl_find_mdl_idx_using_handle(p_msg->api_send_data.mdl_handle,
+                                                 &app_idx, &mcl_idx, &mdl_idx ))
+            {
+                found = TRUE;
+            }
+
+            break;
+
+        case BTA_HL_MCA_CONG_CHG_EVT:
+
+            if (bta_hl_find_mdl_idx_using_handle((tBTA_HL_MDL_HANDLE)p_msg->mca_evt.mca_data.cong_chg.mdl,
+                                                 &app_idx, &mcl_idx, &mdl_idx ))
+            {
+                found = TRUE;
+            }
+
+            break;
+
+        case BTA_HL_MCA_RCV_DATA_EVT:
+            app_idx = p_msg->mca_rcv_data_evt.app_idx;
+            mcl_idx = p_msg->mca_rcv_data_evt.mcl_idx;
+            mdl_idx = p_msg->mca_rcv_data_evt.mdl_idx;
+            found = TRUE;
+            break;
+        case BTA_HL_DCH_RECONNECT_EVT:
+        case BTA_HL_DCH_OPEN_EVT:
+        case BTA_HL_DCH_ECHO_TEST_EVT:
+        case BTA_HL_DCH_SDP_FAIL_EVT:
+            app_idx = p_msg->dch_sdp.app_idx;
+            mcl_idx = p_msg->dch_sdp.mcl_idx;
+            mdl_idx = p_msg->dch_sdp.mdl_idx;
+            found = TRUE;
+            break;
+        case BTA_HL_MCA_RECONNECT_CFM_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,  p_msg->mca_evt.mca_data.reconnect_cfm.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+
+
+        case BTA_HL_API_DCH_CREATE_RSP_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->api_dch_create_rsp.mcl_handle, &app_idx, &mcl_idx)&&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,p_msg->api_dch_create_rsp.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_MCA_ABORT_IND_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx, &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,p_msg->mca_evt.mca_data.abort_ind.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_MCA_ABORT_CFM_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->mca_evt.mcl_handle, &app_idx,  &mcl_idx) &&
+                bta_hl_find_mdl_idx( app_idx,  mcl_idx,  p_msg->mca_evt.mca_data.abort_cfm.mdl_id, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_CI_GET_TX_DATA_EVT:
+        case BTA_HL_CI_PUT_RX_DATA_EVT:
+            if (bta_hl_find_mdl_idx_using_handle(p_msg->ci_get_put_data.mdl_handle, &app_idx, &mcl_idx, &mdl_idx))
+            {
+                found = TRUE;
+            }
+            break;
+        case BTA_HL_CI_GET_ECHO_DATA_EVT:
+        case BTA_HL_CI_PUT_ECHO_DATA_EVT:
+            if (bta_hl_find_mcl_idx_using_handle(p_msg->ci_get_put_echo_data.mcl_handle, &app_idx, &mcl_idx))
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                mdl_idx = p_mcb->echo_mdl_idx;
+                found = TRUE;
+            }
+            break;
+
+        default:
+            break;
+
+    }
+
+    if (found)
+    {
+        *p_app_idx = app_idx;
+        *p_mcl_idx = mcl_idx;
+        *p_mdl_idx = mdl_idx;
+    }
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG5("bta_hl_find_dch_cb_indexes event=%s found=%d app_idx=%d mcl_idx=%d mdl_idx=%d",
+                          bta_hl_evt_code(p_msg->hdr.event), found, *p_app_idx, *p_mcl_idx, *p_mdl_idx  );
+    }
+#endif
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_allocate_mdl_id
+**
+** Description  This function allocates a MDL ID
+**
+** Returns      UINT16 - MDL ID
+**
+*******************************************************************************/
+UINT16  bta_hl_allocate_mdl_id(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx )
+{
+    UINT16  mdl_id=0;
+    tBTA_HL_MCL_CB      *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN duplicate_id;
+    UINT8 i, mdl_cfg_idx;
+
+    do
+    {
+        duplicate_id = FALSE;
+        mdl_id = ((mdl_id+1) & 0xFEFF);
+        /* check mdl_ids that are used for the current conenctions */
+        for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++)
+        {
+            if (p_mcb->mdl[i].in_use &&
+                (i != mdl_idx) &&
+                (p_mcb->mdl[i].mdl_id == mdl_id) )
+            {
+                duplicate_id = TRUE;
+                break;
+            }
+        }
+
+        if (duplicate_id)
+        {
+            /* start from the beginning to get another MDL value*/
+            continue;
+        }
+        else
+        {
+            /* check mdl_ids that are stored in the persistent memory */
+            if (bta_hl_find_mdl_cfg_idx(app_idx,mcl_idx, mdl_id, &mdl_cfg_idx))
+            {
+                duplicate_id = TRUE;
+            }
+            else
+            {
+                /* found a new MDL value */
+                break;
+            }
+        }
+
+    }while (TRUE);
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_allocate_mdl OK mdl_id=%d",  mdl_id);
+#endif
+    return mdl_id;
+}
+/*******************************************************************************
+**
+** Function      bta_hl_find_mdl_idx
+**
+** Description  This function finds the MDL index based on mdl_id
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, UINT16 mdl_id,
+                            UINT8 *p_mdl_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (p_mcb->mdl[i].in_use  &&
+            (mdl_id !=0) &&
+            (p_mcb->mdl[i].mdl_id== mdl_id))
+        {
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_mdl_idx found=%d mdl_id=%d mdl_idx=%d ",
+                          found, mdl_id, i);
+    }
+#endif
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_an_active_mdl_idx
+**
+** Description  This function finds an active MDL
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_an_active_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                      UINT8 *p_mdl_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (p_mcb->mdl[i].in_use  &&
+            (p_mcb->mdl[i].dch_state == BTA_HL_DCH_OPEN_ST))
+        {
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (found)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_find_an_opened_mdl_idx found=%d app_idx=%d mcl_idx=%d mdl_idx=%d",
+                          found, app_idx, mcl_idx, i);
+    }
+#endif
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_dch_setup_mdl_idx
+**
+** Description  This function finds a MDL which in the DCH setup state
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_dch_setup_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                      UINT8 *p_mdl_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (p_mcb->mdl[i].in_use  &&
+            (p_mcb->mdl[i].dch_state == BTA_HL_DCH_OPENING_ST))
+        {
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (found)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_find_dch_setup_mdl_idx found=%d app_idx=%d mcl_idx=%d mdl_idx=%d",
+                          found, app_idx, mcl_idx, i);
+    }
+#endif
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_an_in_use_mcl_idx
+**
+** Description  This function finds an in-use MCL control block index
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_an_in_use_mcl_idx(UINT8 app_idx,
+                                      UINT8 *p_mcl_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb;
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MCLS ; i ++)
+    {
+        p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, i);
+        if (p_mcb->in_use  &&
+            (p_mcb->cch_state != BTA_HL_CCH_IDLE_ST))
+        {
+            found = TRUE;
+            *p_mcl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_an_in_use_mcl_idx found=%d app_idx=%d mcl_idx=%d ",
+                          found, app_idx, i);
+    }
+#endif
+
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_an_in_use_app_idx
+**
+** Description  This function finds an in-use application control block index
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_an_in_use_app_idx(UINT8 *p_app_idx)
+{
+    tBTA_HL_APP_CB      *p_acb ;
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb  = BTA_HL_GET_APP_CB_PTR(i);
+        if (p_acb->in_use)
+        {
+            found = TRUE;
+            *p_app_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_an_in_use_app_idx found=%d app_idx=%d ",
+                          found, i);
+    }
+#endif
+
+    return found;
+}
+/*******************************************************************************
+**
+** Function      bta_hl_find_app_idx
+**
+** Description  This function finds the application control block index based on
+**              the application ID
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx)
+{
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (bta_hl_cb.acb[i].in_use &&
+            (bta_hl_cb.acb[i].app_id == app_id))
+        {
+            found = TRUE;
+            *p_app_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG3("bta_hl_find_app_idx found=%d app_id=%d idx=%d ",
+                      found, app_id, i);
+#endif
+
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_app_idx_using_handle
+**
+** Description  This function finds the application control block index based on
+**              the application handle
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_app_idx_using_handle(tBTA_HL_APP_HANDLE app_handle,
+                                         UINT8 *p_app_idx)
+{
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (bta_hl_cb.acb[i].in_use &&
+            (bta_hl_cb.acb[i].app_handle == app_handle))
+        {
+            found = TRUE;
+            *p_app_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_app_idx_using_mca_handle status=%d handle=%d app_idx=%d ",
+                          found, app_handle , i);
+    }
+#endif
+
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mcl_idx_using_handle
+**
+** Description  This function finds the MCL control block index based on
+**              the MCL handle
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle,
+                                          UINT8 *p_app_idx, UINT8 *p_mcl_idx)
+{
+    tBTA_HL_APP_CB  *p_acb;
+    BOOLEAN         found=FALSE;
+    UINT8 i,j;
+
+    for (i=0; i<BTA_HL_NUM_APPS; i++)
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(i);
+        if (p_acb->in_use)
+        {
+            for (j=0; j < BTA_HL_NUM_MCLS ; j++)
+            {
+                if ( p_acb->mcb[j].mcl_handle == mcl_handle )
+                {
+                    found = TRUE;
+                    *p_app_idx = i;
+                    *p_mcl_idx = j;
+                    break;
+                }
+            }
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_mcl_idx_using_handle found=%d app_idx=%d mcl_idx=%d",
+                          found, i, j);
+    }
+#endif
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mcl_idx
+**
+** Description  This function finds the MCL control block index based on
+**              the peer BD address
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx)
+{
+    BOOLEAN found=FALSE;
+    UINT8 i;
+    tBTA_HL_MCL_CB  *p_mcb;
+
+    for (i=0; i < BTA_HL_NUM_MCLS ; i ++)
+    {
+        p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, i);
+
+        if (bta_hl_cb.acb[app_idx].mcb[i].in_use &&
+            (!memcmp (bta_hl_cb.acb[app_idx].mcb[i].bd_addr, p_bd_addr, BD_ADDR_LEN)))
+        {
+            found = TRUE;
+            *p_mcl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_mcl_idx found=%d idx=%d",
+                          found, i);
+    }
+#endif
+    return found;
+}
+
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mdl_idx_using_handle
+**
+** Description  This function finds the MDL control block index based on
+**              the MDL handle
+**
+** Returns      BOOLEAN TRUE-found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle,
+                                         UINT8 *p_app_idx,UINT8 *p_mcl_idx,
+                                         UINT8 *p_mdl_idx)
+{
+    tBTA_HL_APP_CB      *p_acb;
+    tBTA_HL_MCL_CB      *p_mcb;
+    tBTA_HL_MDL_CB      *p_dcb;
+    BOOLEAN found=FALSE;
+    UINT8 i,j,k;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(i);
+        if (p_acb->in_use)
+        {
+            for (j=0; j< BTA_HL_NUM_MCLS; j++)
+            {
+                p_mcb = BTA_HL_GET_MCL_CB_PTR(i,j);
+                if (p_mcb->in_use)
+                {
+                    for (k=0; k< BTA_HL_NUM_MDLS_PER_MCL; k++)
+                    {
+                        p_dcb = BTA_HL_GET_MDL_CB_PTR(i,j,k);
+                        if (p_dcb->in_use)
+                        {
+                            if (p_dcb->mdl_handle == mdl_handle)
+                            {
+                                found = TRUE;
+                                *p_app_idx = i;
+                                *p_mcl_idx =j;
+                                *p_mdl_idx = k;
+                                break;
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_mdl_idx_using_handle found=%d mdl_handle=%d  ",
+                          found, mdl_handle);
+    }
+#endif
+    return found;
+}
+/*******************************************************************************
+**
+** Function      bta_hl_is_the_first_reliable_existed
+**
+** Description  This function checks whether the first reliable DCH channel
+**              has been setup on the MCL or not
+**
+** Returns      BOOLEAN - TRUE exist
+**                        FALSE does not exist
+**
+*******************************************************************************/
+BOOLEAN bta_hl_is_the_first_reliable_existed(UINT8 app_idx, UINT8 mcl_idx )
+{
+    tBTA_HL_MCL_CB      *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN is_existed =FALSE;
+    UINT8 i ;
+
+    for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++)
+    {
+        if (p_mcb->mdl[i].in_use && p_mcb->mdl[i].is_the_first_reliable)
+        {
+            is_existed = TRUE;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_is_the_first_reliable_existed is_existed=%d  ",is_existed );
+#endif
+    return is_existed;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_non_active_mdl_cfg
+**
+** Description  This function finds a valid MDL configiration index and this
+**              MDL ID is not active
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_find_non_active_mdl_cfg(UINT8 app_idx, UINT8 start_mdl_cfg_idx,
+                                        UINT8 *p_mdl_cfg_idx)
+{
+
+    tBTA_HL_MCL_CB      *p_mcb;
+    tBTA_HL_MDL_CB      *p_dcb;
+    tBTA_HL_MDL_CFG     *p_mdl;
+    BOOLEAN             mdl_in_use;
+    BOOLEAN             found = FALSE;
+    UINT8               i,j,k;
+
+    for (i = start_mdl_cfg_idx; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        mdl_in_use = FALSE;
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        for (j=0; j< BTA_HL_NUM_MCLS; j++)
+        {
+            p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, j);
+            if (p_mcb->in_use &&
+                !memcmp(p_mdl->peer_bd_addr,p_mcb->bd_addr,BD_ADDR_LEN))
+            {
+
+                for (k=0; k<BTA_HL_NUM_MDLS_PER_MCL; k++)
+                {
+                    p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, j, k);
+
+                    if (p_dcb->in_use &&  p_mdl->mdl_id == p_dcb->mdl_id)
+                    {
+                        mdl_in_use = TRUE;
+                        break;
+                    }
+                }
+            }
+
+            if (mdl_in_use)
+            {
+                break;
+            }
+        }
+
+        if (!mdl_in_use)
+        {
+            *p_mdl_cfg_idx = i;
+            found = TRUE;
+            break;
+        }
+    }
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mdl_cfg_idx
+**
+** Description  This function finds an available MDL configiration index
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_find_avail_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                       UINT8 *p_mdl_cfg_idx)
+{
+    tBTA_HL_MDL_CFG     *p_mdl, *p_mdl1, *p_mdl2;
+    UINT8               i;
+    BOOLEAN             found=FALSE;
+    UINT8               first_mdl_cfg_idx, second_mdl_cfg_idx, older_mdl_cfg_idx;
+    BOOLEAN             done;
+
+
+    for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (!p_mdl->active  )
+        {
+            /* found an unused space to store mdl cfg*/
+            found=TRUE;
+            *p_mdl_cfg_idx =i;
+            break;
+        }
+    }
+
+    if (!found)
+    {
+        /* all available mdl cfg spaces are in use so we need to find the mdl cfg which is
+        not currently in use and has the the oldest time stamp to remove*/
+
+        found = TRUE;
+        if (bta_hl_find_non_active_mdl_cfg(app_idx,0, &first_mdl_cfg_idx))
+        {
+            if (bta_hl_find_non_active_mdl_cfg(app_idx,(UINT8) (first_mdl_cfg_idx+1), &second_mdl_cfg_idx))
+            {
+                done = FALSE;
+                while (!done)
+                {
+                    p_mdl1 = BTA_HL_GET_MDL_CFG_PTR(app_idx, first_mdl_cfg_idx);
+                    p_mdl2 = BTA_HL_GET_MDL_CFG_PTR(app_idx, second_mdl_cfg_idx);
+
+                    if (p_mdl1->time < p_mdl2->time)
+                    {
+                        older_mdl_cfg_idx =  first_mdl_cfg_idx;
+                    }
+                    else
+                    {
+                        older_mdl_cfg_idx =  second_mdl_cfg_idx;
+                    }
+
+                    if (bta_hl_find_non_active_mdl_cfg(app_idx,(UINT8) (second_mdl_cfg_idx+1), &second_mdl_cfg_idx))
+                    {
+                        first_mdl_cfg_idx = older_mdl_cfg_idx;
+                    }
+                    else
+                    {
+                        done = TRUE;
+                    }
+                }
+
+                *p_mdl_cfg_idx = older_mdl_cfg_idx;
+
+            }
+            else
+            {
+                *p_mdl_cfg_idx = first_mdl_cfg_idx;
+            }
+
+        }
+        else
+        {
+            found = FALSE;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_avail_mdl_cfg_idx found=%d mdl_cfg_idx=%d ",found, *p_mdl_cfg_idx  );
+    }
+#endif
+
+    return found;
+
+
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mdl_cfg_idx
+**
+** Description  This function finds the MDL configuration index based on
+**              the MDL ID
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_find_mdl_cfg_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                 tBTA_HL_MDL_ID mdl_id, UINT8 *p_mdl_cfg_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CFG     *p_mdl;
+    UINT8 i ;
+    BOOLEAN found=FALSE;
+    for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (p_mdl->active &&
+            (!memcmp (p_mcb->bd_addr, p_mdl->peer_bd_addr, BD_ADDR_LEN))&&
+            (p_mdl->mdl_id == mdl_id))
+        {
+            found=TRUE;
+            *p_mdl_cfg_idx =i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_mdl_cfg_idx found=%d mdl_cfg_idx=%d ",found, i );
+    }
+#endif
+
+    return found;
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_get_cur_time
+**
+** Description  This function get the cuurent time value
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_get_cur_time(UINT8 app_idx, UINT8 *p_cur_time)
+{
+    tBTA_HL_MDL_CFG     *p_mdl;
+    UINT8 i, j, time_latest, time;
+    BOOLEAN found=FALSE, result=TRUE;
+
+    for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (p_mdl->active)
+        {
+            found=TRUE;
+            time_latest = p_mdl->time;
+            for (j=(i+1); j< BTA_HL_NUM_MDL_CFGS; j++ )
+            {
+                p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, j);
+                if (p_mdl->active)
+                {
+                    time = p_mdl->time;
+                    if (time > time_latest)
+                    {
+                        time_latest = time;
+                    }
+                }
+            }
+            break;
+        }
+    }
+
+
+    if (found)
+    {
+        if (time_latest < BTA_HL_MAX_TIME)
+        {
+            *p_cur_time = time_latest+1;
+        }
+        else
+        {
+            /* need to wrap around */
+            result = FALSE;
+        }
+    }
+    else
+    {
+        *p_cur_time = BTA_HL_MIN_TIME;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!result)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_get_cur_time result=%s cur_time=%d",
+                          (result?"OK":"FAIL"), *p_cur_time);
+    }
+#endif
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_sort_cfg_time_idx
+**
+** Description  This function sort the mdl configuration idx stored in array a
+**              based on decending time value
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+void bta_hl_sort_cfg_time_idx(UINT8 app_idx, UINT8 *a, UINT8 n)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    UINT8 temp_time, temp_idx;
+    INT16 i, j;
+    for (i = 1; i < n; ++i)
+    {
+        temp_idx = a[i];
+        temp_time = p_acb->mdl_cfg[temp_idx].time;
+        j = i - 1;
+        while ((j >= 0) && (temp_time < p_acb->mdl_cfg[a[j]].time))
+        {
+            a[j + 1] = a[j];
+            --j;
+        }
+        a[j + 1] = temp_idx;
+    }
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_compact_mdl_cfg_time
+**
+** Description  This function finds the MDL configuration index based on
+**              the MDL ID
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+void  bta_hl_compact_mdl_cfg_time(UINT8 app_idx)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MDL_CFG     *p_mdl;
+    UINT8 i, time_min, cnt=0;
+    UINT8   s_arr[BTA_HL_NUM_MDL_CFGS];
+
+
+    for (i=0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (p_mdl->active )
+        {
+            s_arr[cnt]= i;
+            cnt++;
+        }
+    }
+
+
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_compact_mdl_cfg_time cnt=%d ",cnt );
+#endif
+
+
+    if (cnt)
+    {
+        bta_hl_sort_cfg_time_idx(app_idx, s_arr, cnt);
+        time_min = BTA_HL_MIN_TIME;
+        for (i=0;i<cnt; i++)
+        {
+            p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, s_arr[i]);
+            p_mdl->time = time_min + i;
+            bta_hl_co_save_mdl(p_acb->app_id, s_arr[i], p_mdl);
+        }
+    }
+
+
+}
+
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_is_mdl_exsit_in_mcl
+**
+** Description  This function checks whether the MDL ID
+**              has already existed in teh MCL or not
+**
+** Returns      BOOLEAN - TRUE exist
+**                        FALSE does not exist
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_is_mdl_exsit_in_mcl(UINT8 app_idx, BD_ADDR bd_addr,
+                                    tBTA_HL_MDL_ID mdl_id)
+{
+    tBTA_HL_MDL_CFG     *p_mdl;
+    BOOLEAN             found = FALSE;
+    UINT8               i;
+
+    for (i = 0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (p_mdl->active &&
+            !memcmp(p_mdl->peer_bd_addr, bd_addr,BD_ADDR_LEN))
+        {
+            if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS)
+            {
+                if (p_mdl->mdl_id == mdl_id)
+                {
+                    found = TRUE;
+                    break;
+                }
+            }
+            else
+            {
+                found = TRUE;
+                break;
+            }
+        }
+    }
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_delete_mdl_cfg
+**
+** Description  This function delete the specified MDL ID
+**
+** Returns      BOOLEAN - TRUE Success
+**                        FALSE Failed
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_delete_mdl_cfg(UINT8 app_idx, BD_ADDR bd_addr,
+                               tBTA_HL_MDL_ID mdl_id)
+{
+    tBTA_HL_MDL_CFG     *p_mdl;
+    BOOLEAN             success = FALSE;
+    UINT8               i;
+    tBTA_HL_APP_CB      *p_acb= BTA_HL_GET_APP_CB_PTR(app_idx);
+    UINT8               app_id = p_acb->app_id;
+
+    for (i = 0; i< BTA_HL_NUM_MDL_CFGS; i++)
+    {
+        p_mdl = BTA_HL_GET_MDL_CFG_PTR(app_idx, i);
+        if (p_mdl->active &&
+            !memcmp(p_mdl->peer_bd_addr, bd_addr,BD_ADDR_LEN))
+        {
+            if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS)
+            {
+                if (p_mdl->mdl_id == mdl_id)
+                {
+                    bta_hl_co_delete_mdl(app_id, i);
+                    memset(p_mdl, 0, sizeof(tBTA_HL_MDL_CFG));
+                    success = TRUE;
+                    break;
+                }
+            }
+            else
+            {
+                bta_hl_co_delete_mdl(app_id, i);
+                memset(p_mdl, 0, sizeof(tBTA_HL_MDL_CFG));
+                success = TRUE;
+            }
+        }
+    }
+
+    return success;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_is_mdl_value_valid
+**
+**
+** Description  This function checks the specified MDL ID is in valid range or not
+**
+** Returns      BOOLEAN - TRUE Success
+**                        FALSE Failed
+**
+** note:   mdl_id range   0x0000 reserved,
+**                        0x0001-oxFEFF dynamic range,
+**                        0xFF00-0xFFFE reserved,
+**                        0xFFFF indicates all MDLs (for delete operation only)
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_is_mdl_value_valid(tBTA_HL_MDL_ID mdl_id)
+{
+    BOOLEAN             status = TRUE;
+
+    if (mdl_id != BTA_HL_DELETE_ALL_MDL_IDS)
+    {
+        if (mdl_id != 0)
+        {
+            if (mdl_id > BTA_HL_MAX_MDL_VAL )
+            {
+                status = FALSE;
+            }
+        }
+        else
+        {
+            status = FALSE;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_mdep_cfg_idx
+**
+** Description  This function finds the MDEP configuration index based
+**                on the local MDEP ID
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_mdep_cfg_idx(UINT8 app_idx,  tBTA_HL_MDEP_ID local_mdep_id,
+                                 UINT8 *p_mdep_cfg_idx)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_SUP_FEATURE     *p_sup_feature= &p_acb->sup_feature;
+    BOOLEAN found =FALSE;
+    UINT8 i;
+
+    for (i=0; i< p_sup_feature->num_of_mdeps; i++)
+    {
+        if ( p_sup_feature->mdep[i].mdep_id == local_mdep_id)
+        {
+            found = TRUE;
+            *p_mdep_cfg_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_find_mdep_cfg_idx found=%d mdep_idx=%d local_mdep_id=%d ",
+                          found,i, local_mdep_id );
+    }
+#endif
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_rxtx_apdu_size
+**
+** Description  This function finds the maximum APDU rx and tx sizes based on
+**              the MDEP configuration data
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_hl_find_rxtx_apdu_size(UINT8 app_idx, UINT8 mdep_cfg_idx,
+                                UINT16 *p_rx_apu_size,
+                                UINT16 *p_tx_apu_size)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MDEP_CFG     *p_mdep_cfg;
+    UINT8 i;
+    UINT16 max_rx_apdu_size=0, max_tx_apdu_size=0;
+
+    p_mdep_cfg = &p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg;
+
+
+    for (i=0; i< p_mdep_cfg->num_of_mdep_data_types ; i++)
+    {
+
+        if (max_rx_apdu_size < p_mdep_cfg->data_cfg[i].max_rx_apdu_size)
+        {
+            max_rx_apdu_size = p_mdep_cfg->data_cfg[i].max_rx_apdu_size;
+        }
+
+        if (max_tx_apdu_size < p_mdep_cfg->data_cfg[i].max_tx_apdu_size)
+        {
+            max_tx_apdu_size = p_mdep_cfg->data_cfg[i].max_tx_apdu_size;
+        }
+    }
+
+
+    *p_rx_apu_size = max_rx_apdu_size;
+    *p_tx_apu_size = max_tx_apdu_size;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG2("bta_hl_find_rxtx_apdu_size max_rx_apdu_size=%d max_tx_apdu_size=%d ",
+                      max_rx_apdu_size, max_tx_apdu_size );
+#endif
+
+
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_validate_peer_cfg
+**
+** Description  This function validates the peer DCH configuration
+**
+** Returns      BOOLEAN - TRUE validation is successful
+**                        FALSE validation failed
+**
+*******************************************************************************/
+BOOLEAN bta_hl_validate_peer_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,
+                                 tBTA_HL_MDEP_ID peer_mdep_id,
+                                 tBTA_HL_MDEP_ROLE peer_mdep_role,
+                                 UINT8 sdp_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    tBTA_HL_SDP_REC     *p_rec;
+    BOOLEAN peer_found =FALSE;
+    UINT8 i;
+
+    APPL_TRACE_DEBUG1("bta_hl_validate_peer_cfg sdp_idx=%d", sdp_idx);
+
+
+    if (p_dcb->local_mdep_id == BTA_HL_ECHO_TEST_MDEP_ID)
+    {
+        return TRUE;
+    }
+
+    p_rec = &p_mcb->sdp.sdp_rec[sdp_idx];
+    for (i=0; i< p_rec->num_mdeps; i++)
+    {
+        if ( (p_rec->mdep_cfg[i].mdep_id == peer_mdep_id) &&
+             (p_rec->mdep_cfg[i].mdep_role == peer_mdep_role))
+        {
+            peer_found = TRUE;
+
+            break;
+        }
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+    if (!peer_found)
+    {
+        APPL_TRACE_DEBUG1("bta_hl_validate_peer_cfg failed num_mdeps=%d",p_rec->num_mdeps);
+    }
+#endif
+    return peer_found;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_chk_local_cfg
+**
+** Description  This function check whether the local DCH configuration is OK or not
+**
+** Returns      tBTA_HL_STATUS - OK - local DCH configuration is OK
+**                               NO_FIRST_RELIABLE - the streaming DCH configuration
+**                                                   is not OK and it needs to use
+**                                                   reliable DCH configuration
+**
+*******************************************************************************/
+tBTA_HL_STATUS bta_hl_chk_local_cfg(UINT8 app_idx, UINT8 mcl_idx,
+                                    UINT8 mdep_cfg_idx,
+                                    tBTA_HL_DCH_CFG local_cfg)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_STATUS status = BTA_HL_STATUS_OK;
+
+    if ( mdep_cfg_idx &&
+         (p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE) &&
+         (!bta_hl_is_the_first_reliable_existed(app_idx, mcl_idx)) &&
+         (local_cfg != BTA_HL_DCH_CFG_RELIABLE))
+    {
+        status =  BTA_HL_STATUS_NO_FIRST_RELIABLE;
+        APPL_TRACE_ERROR0("BTA_HL_STATUS_INVALID_DCH_CFG");
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_validate_reconnect_params
+**
+** Description  This function validates the reconnect parameters
+**
+** Returns      BOOLEAN - TRUE validation is successful
+**                        FALSE validation failed
+*******************************************************************************/
+BOOLEAN bta_hl_validate_reconnect_params(UINT8 app_idx, UINT8 mcl_idx,
+                                         tBTA_HL_API_DCH_RECONNECT *p_reconnect,
+                                         UINT8 *p_mdep_cfg_idx, UINT8 *p_mdl_cfg_idx)
+{
+    tBTA_HL_APP_CB      *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_SUP_FEATURE *p_sup_feature = &p_acb->sup_feature;
+    UINT8               num_mdeps;
+    UINT8               mdl_cfg_idx;
+    BOOLEAN local_mdep_id_found =FALSE;
+    BOOLEAN mdl_cfg_found =FALSE;
+    BOOLEAN            status=FALSE;
+    UINT8 i, in_use_mdl_idx;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_validate_reconnect_params  mdl_id=%d", p_reconnect->mdl_id);
+#endif
+    if (bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, p_reconnect->mdl_id, &mdl_cfg_idx))
+    {
+        mdl_cfg_found = TRUE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!mdl_cfg_found)
+    {
+        APPL_TRACE_DEBUG0("mdl_cfg_found not found");
+    }
+#endif
+
+
+    if (mdl_cfg_found)
+    {
+        num_mdeps = p_sup_feature->num_of_mdeps;
+        for (i=0; i< num_mdeps ; i++)
+        {
+            if ( p_sup_feature->mdep[i].mdep_id == p_acb->mdl_cfg[mdl_cfg_idx].local_mdep_id)
+            {
+                local_mdep_id_found = TRUE;
+                *p_mdep_cfg_idx =i;
+                *p_mdl_cfg_idx = mdl_cfg_idx;
+                break;
+            }
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!local_mdep_id_found)
+    {
+        APPL_TRACE_DEBUG0("local_mdep_id not found");
+    }
+#endif
+
+
+    if (local_mdep_id_found)
+    {
+        if (!bta_hl_find_mdl_idx(app_idx,mcl_idx, p_reconnect->mdl_id, &in_use_mdl_idx))
+        {
+            status= TRUE;
+        }
+        else
+        {
+            APPL_TRACE_ERROR1("mdl_id=%d is curreltly in use",p_reconnect->mdl_id);
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!status)
+    {
+        APPL_TRACE_DEBUG3("Reconnect validation failed local_mdep_id found=%d mdl_cfg_idx found=%d in_use_mdl_idx=%d ",
+                          local_mdep_id_found,  mdl_cfg_found, in_use_mdl_idx);
+    }
+#endif
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_avail_mcl_idx
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx)
+{
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MCLS ; i ++)
+    {
+        if (!bta_hl_cb.acb[app_idx].mcb[i].in_use)
+        {
+            found = TRUE;
+            *p_mcl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_avail_mcl_idx found=%d idx=%d",
+                          found, i);
+    }
+#endif
+    return found;
+}
+
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_avail_mdl_idx
+**
+** Description  This function finds an available MDL control block index
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                  UINT8 *p_mdl_idx)
+{
+    tBTA_HL_MCL_CB      *p_mcb = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (!p_mcb->mdl[i].in_use)
+        {
+            memset((void *)&p_mcb->mdl[i],0, sizeof(tBTA_HL_MDL_CB));
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_avail_mdl_idx found=%d idx=%d",
+                          found, i);
+    }
+#endif
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_is_a_duplicate_id
+**
+** Description  This function finds the application has been used or not
+**
+** Returns      BOOLEAN - TRUE the app_id is a duplicate ID
+**                        FALSE not a duplicate ID
+*******************************************************************************/
+BOOLEAN bta_hl_is_a_duplicate_id(UINT8 app_id)
+{
+    BOOLEAN is_duplicate=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (bta_hl_cb.acb[i].in_use &&
+            (bta_hl_cb.acb[i].app_id == app_id))
+        {
+            is_duplicate = TRUE;
+
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (is_duplicate)
+    {
+
+        APPL_TRACE_DEBUG2("bta_hl_is_a_duplicate_id app_id=%d is_duplicate=%d",
+                          app_id, is_duplicate);
+    }
+#endif
+
+    return is_duplicate;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_find_avail_app_idx
+**
+** Description  This function finds an available application control block index
+**
+** Returns      BOOLEAN - TRUE found
+**                        FALSE not found
+**
+*******************************************************************************/
+BOOLEAN bta_hl_find_avail_app_idx(UINT8 *p_idx)
+{
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (!bta_hl_cb.acb[i].in_use)
+        {
+            found = TRUE;
+            *p_idx = i;
+            break;
+        }
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!found)
+    {
+        APPL_TRACE_DEBUG2("bta_hl_find_avail_app_idx found=%d app_idx=%d",
+                          found, i);
+    }
+#endif
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_app_registration
+**
+** Description  This function registers an HDP application MCAP and DP
+**
+** Returns      tBTA_HL_STATUS -registration status
+**
+*******************************************************************************/
+tBTA_HL_STATUS bta_hl_app_registration(UINT8 app_idx)
+{
+    tBTA_HL_STATUS  status = BTA_HL_STATUS_OK;
+    tBTA_HL_APP_CB  *p_acb = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tMCA_REG        reg;
+    tMCA_CS         mca_cs;
+    UINT8           i, num_of_mdeps;
+
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("bta_hl_app_registration app_idx=%d", app_idx);
+#endif
+
+    reg.ctrl_psm = p_acb->ctrl_psm;
+    reg.data_psm = p_acb->data_psm;
+    reg.sec_mask = p_acb->sec_mask;
+    reg.rsp_tout = BTA_HL_MCAP_RSP_TOUT;
+
+    if ( (p_acb->app_handle = (tBTA_HL_APP_HANDLE) MCA_Register(&reg, bta_hl_mcap_ctrl_cback))!=0)
+    {
+        mca_cs.type = MCA_TDEP_ECHO;
+        mca_cs.max_mdl = BTA_HL_NUM_MDLS_PER_MDEP;
+        mca_cs.p_data_cback = bta_hl_mcap_data_cback;
+
+        if (MCA_CreateDep((tMCA_HANDLE)p_acb->app_handle,
+                          &(p_acb->sup_feature.mdep[0].mdep_id),
+                          &mca_cs) == MCA_SUCCESS)
+        {
+            if (p_acb->sup_feature.mdep[0].mdep_id != BTA_HL_ECHO_TEST_MDEP_ID)
+            {
+                status = BTA_HL_STATUS_MCAP_REG_FAIL;
+                APPL_TRACE_ERROR1("BAD MDEP ID for echo test mdep_id=%d",
+                                  p_acb->sup_feature.mdep[0].mdep_id );
+            }
+        }
+        else
+        {
+            status = BTA_HL_STATUS_MCAP_REG_FAIL;
+            APPL_TRACE_ERROR0("MCA_CreateDep for echo test(mdep_id=0) failed");
+        }
+
+
+        if ((status == BTA_HL_STATUS_OK) &&
+            bta_hl_co_get_num_of_mdep(p_acb->app_id, &num_of_mdeps))
+        {
+            p_acb->sup_feature.num_of_mdeps = num_of_mdeps+1;
+
+            for (i=1; i<p_acb->sup_feature.num_of_mdeps; i++)
+            {
+                mca_cs.type = MCA_TDEP_DATA;
+                mca_cs.max_mdl = BTA_HL_NUM_MDLS_PER_MDEP;
+                mca_cs.p_data_cback = bta_hl_mcap_data_cback;
+
+                if (MCA_CreateDep((tMCA_HANDLE)p_acb->app_handle,
+                                  &(p_acb->sup_feature.mdep[i].mdep_id), &mca_cs) == MCA_SUCCESS)
+                {
+                    if (bta_hl_co_get_mdep_config(p_acb->app_id,
+                                                  i,
+                                                  p_acb->sup_feature.mdep[i].mdep_id,
+                                                  &p_acb->sup_feature.mdep[i].mdep_cfg))
+                    {
+                        if (p_acb->sup_feature.mdep[i].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+                        {
+                            p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SOURCE;
+                        }
+                        else if (p_acb->sup_feature.mdep[i].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SINK)
+                        {
+                            p_acb->sup_feature.app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SINK;
+                        }
+                        else
+                        {
+                            status = BTA_HL_STATUS_MDEP_CO_FAIL;
+                            break;
+                        }
+                    }
+                    else
+                    {
+                        status = BTA_HL_STATUS_MDEP_CO_FAIL;
+                        break;
+                    }
+                }
+                else
+                {
+                    status = BTA_HL_STATUS_MCAP_REG_FAIL;
+                    break;
+                }
+            }
+
+
+
+            if ((status == BTA_HL_STATUS_OK) &&
+                (p_acb->sup_feature.app_role_mask == BTA_HL_MDEP_ROLE_MASK_SOURCE))
+            {
+                /* this is a source only applciation */
+                p_acb->sup_feature.advertize_source_sdp =
+                bta_hl_co_advrtise_source_sdp(p_acb->app_id);
+            }
+
+            if ((status == BTA_HL_STATUS_OK)&&
+                (!bta_hl_co_get_echo_config(p_acb->app_id, &p_acb->sup_feature.echo_cfg)))
+            {
+                status = BTA_HL_STATUS_ECHO_CO_FAIL;
+            }
+
+            if ((status == BTA_HL_STATUS_OK)&&
+                (!bta_hl_co_load_mdl_config(p_acb->app_id, BTA_HL_NUM_MDL_CFGS, &p_acb->mdl_cfg[0])))
+            {
+                status = BTA_HL_STATUS_MDL_CFG_CO_FAIL;
+            }
+        }
+        else
+        {
+            status = BTA_HL_STATUS_MDEP_CO_FAIL;
+        }
+    }
+    else
+    {
+        status = BTA_HL_STATUS_MCAP_REG_FAIL;
+    }
+
+    if (status == BTA_HL_STATUS_OK)
+    {
+        status = bta_hl_sdp_register(app_idx);
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_discard_data
+**
+** Description  This function discard an HDP event
+**
+** Returns     void
+**
+*******************************************************************************/
+void bta_hl_discard_data(UINT16 event, tBTA_HL_DATA *p_data)
+{
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_ERROR1("BTA HL Discard event=%s",bta_hl_evt_code(event));
+
+#endif
+
+    switch (event)
+    {
+        case BTA_HL_API_SEND_DATA_EVT:
+            break;
+
+        case BTA_HL_MCA_RCV_DATA_EVT:
+            utl_freebuf((void**)&p_data->mca_rcv_data_evt.p_pkt);
+            break;
+
+        default:
+            /*Nothing to free*/
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_save_mdl_cfg
+**
+** Description    This function saves the MDL configuration
+**
+** Returns     void
+**
+*******************************************************************************/
+void bta_hl_save_mdl_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx )
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    UINT8 mdl_cfg_idx;
+    tBTA_HL_MDL_ID mdl_id;
+    BOOLEAN      found=TRUE;
+    tBTA_HL_MDL_CFG mdl_cfg;
+    tBTA_HL_MDEP *p_mdep_cfg;
+    tBTA_HL_L2CAP_CFG_INFO l2cap_cfg;
+    UINT8 time_val;
+    mdl_id = p_dcb->mdl_id;
+    if (!bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, mdl_id, &mdl_cfg_idx))
+    {
+        if (!bta_hl_find_avail_mdl_cfg_idx(app_idx, mcl_idx, &mdl_cfg_idx))
+        {
+            APPL_TRACE_ERROR0("No space to save the MDL config");
+            found= FALSE; /*no space available*/
+        }
+    }
+
+    if (found)
+    {
+        bta_hl_get_l2cap_cfg(p_dcb->mdl_handle, &l2cap_cfg);
+        if (!bta_hl_get_cur_time(app_idx, &time_val ))
+        {
+            bta_hl_compact_mdl_cfg_time(app_idx);
+            bta_hl_get_cur_time(app_idx, &time_val);
+        }
+        mdl_cfg.active = TRUE;
+        mdl_cfg.time = time_val;
+        mdl_cfg.mdl_id  = p_dcb->mdl_id;
+        mdl_cfg.dch_mode = p_dcb->dch_mode;
+        mdl_cfg.mtu = l2cap_cfg.mtu;
+        mdl_cfg.fcs = l2cap_cfg.fcs;
+
+        bdcpy(mdl_cfg.peer_bd_addr, p_mcb->bd_addr);
+        mdl_cfg.local_mdep_id= p_dcb->local_mdep_id;
+        p_mdep_cfg = &p_acb->sup_feature.mdep[p_dcb->local_mdep_cfg_idx];
+        mdl_cfg.local_mdep_role= p_mdep_cfg->mdep_cfg.mdep_role;
+        memcpy(&p_acb->mdl_cfg[mdl_cfg_idx], &mdl_cfg, sizeof(tBTA_HL_MDL_CFG));
+        bta_hl_co_save_mdl(p_acb->app_id, mdl_cfg_idx, &mdl_cfg);
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (found)
+    {
+        if (p_dcb->mtu != l2cap_cfg.mtu)
+        {
+            APPL_TRACE_WARNING2("MCAP and L2CAP peer mtu size out of sync from MCAP mtu=%d from l2cap mtu=%d",
+                                p_dcb->mtu, l2cap_cfg.mtu);
+        }
+        APPL_TRACE_DEBUG1("bta_hl_save_mdl_cfg saved=%d", found);
+        APPL_TRACE_DEBUG4("Saved. L2cap cfg mdl_id=%d mtu=%d fcs=%d dch_mode=%d",
+                          mdl_cfg.mdl_id, mdl_cfg.mtu, mdl_cfg.fcs,  mdl_cfg.dch_mode);
+    }
+#endif
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_set_dch_chan_cfg
+**
+** Description    This function setups the L2CAP DCH channel configuration
+**
+** Returns     void
+*******************************************************************************/
+void bta_hl_set_dch_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx,tBTA_HL_DATA *p_data)
+{
+    tBTA_HL_APP_CB *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MDL_CB *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    UINT8 l2cap_mode = L2CAP_FCR_ERTM_MODE;
+    tBTA_HL_SUP_FEATURE *p_sup_feature= &p_acb->sup_feature;
+    UINT8 local_mdep_cfg_idx = p_dcb->local_mdep_cfg_idx;
+
+    switch (p_dcb->dch_oper)
+    {
+        case BTA_HL_DCH_OP_LOCAL_RECONNECT:
+        case BTA_HL_DCH_OP_REMOTE_RECONNECT:
+            if (p_dcb->dch_mode  == BTA_HL_DCH_MODE_STREAMING)
+                l2cap_mode = L2CAP_FCR_STREAM_MODE;
+            break;
+        case BTA_HL_DCH_OP_LOCAL_OPEN:
+            if (p_data->mca_evt.mca_data.create_cfm.cfg == BTA_HL_DCH_CFG_STREAMING)
+                l2cap_mode = L2CAP_FCR_STREAM_MODE;
+            break;
+        case BTA_HL_DCH_OP_REMOTE_OPEN:
+            if (p_dcb->local_cfg == BTA_HL_DCH_CFG_STREAMING )
+                l2cap_mode = L2CAP_FCR_STREAM_MODE;
+            break;
+        default:
+            APPL_TRACE_ERROR1("Invalid dch oper=%d for set dch chan cfg", p_dcb->dch_oper);
+            break;
+    }
+    p_dcb->chnl_cfg.fcr_opt.mode        = l2cap_mode;
+    p_dcb->chnl_cfg.fcr_opt.mps         = bta_hl_set_mps(p_dcb->max_rx_apdu_size);
+    p_dcb->chnl_cfg.fcr_opt.tx_win_sz   = bta_hl_set_tx_win_size(p_dcb->max_rx_apdu_size,
+                                                                 p_dcb->chnl_cfg.fcr_opt.mps);
+    p_dcb->chnl_cfg.fcr_opt.max_transmit= BTA_HL_L2C_MAX_TRANSMIT;
+    p_dcb->chnl_cfg.fcr_opt.rtrans_tout = BTA_HL_L2C_RTRANS_TOUT;
+    p_dcb->chnl_cfg.fcr_opt.mon_tout    = BTA_HL_L2C_MON_TOUT;
+
+    p_dcb->chnl_cfg.user_rx_pool_id     = bta_hl_set_user_rx_pool_id(p_dcb->max_rx_apdu_size);
+    p_dcb->chnl_cfg.user_tx_pool_id     = bta_hl_set_user_tx_pool_id(p_dcb->max_tx_apdu_size);
+    p_dcb->chnl_cfg.fcr_rx_pool_id      = BTA_HL_L2C_FCR_RX_POOL_ID;
+    p_dcb->chnl_cfg.fcr_tx_pool_id      = BTA_HL_L2C_FCR_TX_POOL_ID;
+    p_dcb->chnl_cfg.data_mtu            = p_dcb->max_rx_apdu_size;
+
+    p_dcb->chnl_cfg.fcs = BTA_HL_MCA_NO_FCS;
+    if (local_mdep_cfg_idx !=  BTA_HL_ECHO_TEST_MDEP_CFG_IDX)
+    {
+        if (p_sup_feature->mdep[local_mdep_cfg_idx].mdep_cfg.mdep_role ==
+            BTA_HL_MDEP_ROLE_SOURCE)
+        {
+            p_dcb->chnl_cfg.fcs = BTA_HL_DEFAULT_SOURCE_FCS;
+        }
+    }
+    else
+    {
+        p_dcb->chnl_cfg.fcs = BTA_HL_MCA_USE_FCS;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG1("L2CAP Params l2cap_mode[3-ERTM 4-STREAM]=%d", l2cap_mode);
+    APPL_TRACE_DEBUG2("Use FCS =%s mtu=%d", ((p_dcb->chnl_cfg.fcs & 1)?"YES":"NO"),
+                      p_dcb->chnl_cfg.data_mtu);
+    APPL_TRACE_DEBUG5("tx_win_sz=%d, max_transmit=%d, rtrans_tout=%d, mon_tout=%d, mps=%d",
+                      p_dcb->chnl_cfg.fcr_opt.tx_win_sz,
+                      p_dcb->chnl_cfg.fcr_opt.max_transmit,
+                      p_dcb->chnl_cfg.fcr_opt.rtrans_tout,
+                      p_dcb->chnl_cfg.fcr_opt.mon_tout,
+                      p_dcb->chnl_cfg.fcr_opt.mps);
+
+    APPL_TRACE_DEBUG4("USER rx_pool_id=%d, tx_pool_id=%d, FCR rx_pool_id=%d, tx_pool_id=%d",
+                      p_dcb->chnl_cfg.user_rx_pool_id,
+                      p_dcb->chnl_cfg.user_tx_pool_id,
+                      p_dcb->chnl_cfg.fcr_rx_pool_id,
+                      p_dcb->chnl_cfg.fcr_tx_pool_id);
+
+#endif
+
+
+
+
+
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_get_l2cap_cfg
+**
+** Description    This function get the current L2CAP channel configuration
+**
+** Returns     BOOLEAN - TRUE - operation is successful
+*******************************************************************************/
+BOOLEAN bta_hl_get_l2cap_cfg(tBTA_HL_MDL_HANDLE mdl_hnd, tBTA_HL_L2CAP_CFG_INFO *p_cfg)
+{
+    BOOLEAN success = FALSE;
+    UINT16 lcid;
+    tL2CAP_CFG_INFO *p_our_cfg;
+    tL2CAP_CH_CFG_BITS our_cfg_bits;
+    tL2CAP_CFG_INFO *p_peer_cfg;
+    tL2CAP_CH_CFG_BITS peer_cfg_bits;
+
+    lcid = MCA_GetL2CapChannel((tMCA_DL) mdl_hnd);
+    if ( lcid &&
+         L2CA_GetCurrentConfig(lcid, &p_our_cfg, &our_cfg_bits, &p_peer_cfg,
+                               &peer_cfg_bits))
+    {
+        p_cfg->fcs = BTA_HL_MCA_NO_FCS;
+        if (our_cfg_bits & L2CAP_CH_CFG_MASK_FCS)
+        {
+            p_cfg->fcs |= p_our_cfg->fcs;
+        }
+        else
+        {
+            p_cfg->fcs = BTA_HL_MCA_USE_FCS;
+        }
+
+        if (p_cfg->fcs != BTA_HL_MCA_USE_FCS )
+        {
+            if (peer_cfg_bits & L2CAP_CH_CFG_MASK_FCS)
+            {
+                p_cfg->fcs |= p_peer_cfg->fcs;
+            }
+            else
+            {
+                p_cfg->fcs = BTA_HL_MCA_USE_FCS;
+            }
+        }
+
+        p_cfg->mtu =0;
+        if (peer_cfg_bits & L2CAP_CH_CFG_MASK_MTU)
+        {
+            p_cfg->mtu = p_peer_cfg->mtu;
+        }
+        else
+        {
+            p_cfg->mtu = L2CAP_DEFAULT_MTU;
+        }
+        success = TRUE;
+    }
+
+#if BTA_HL_DEBUG == TRUE
+    if (!success)
+    {
+        APPL_TRACE_DEBUG3("bta_hl_get_l2cap_cfg success=%d mdl=%d lcid=%d", success, mdl_hnd, lcid);
+        APPL_TRACE_DEBUG2("l2cap mtu=%d fcs=%d", p_cfg->mtu, p_cfg->fcs);
+    }
+#endif
+
+    return success;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_validate_chan_cfg
+**
+** Description    This function validates the L2CAP channel configuration
+**
+** Returns     BOOLEAN - TRUE - validation is successful
+*******************************************************************************/
+BOOLEAN bta_hl_validate_chan_cfg(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx)
+{
+    tBTA_HL_APP_CB *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MDL_CB *p_dcb  = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    BOOLEAN success = FALSE;
+    UINT8 mdl_cfg_idx;
+    tBTA_HL_L2CAP_CFG_INFO l2cap_cfg;
+
+
+    if (bta_hl_get_l2cap_cfg(p_dcb->mdl_handle, &l2cap_cfg) &&
+        bta_hl_find_mdl_cfg_idx(app_idx, mcl_idx, p_dcb->mdl_id, &mdl_cfg_idx))
+    {
+        if ((p_acb->mdl_cfg[mdl_cfg_idx].mtu <= l2cap_cfg.mtu) &&
+            (p_acb->mdl_cfg[mdl_cfg_idx].fcs == l2cap_cfg.fcs) &&
+            (p_acb->mdl_cfg[mdl_cfg_idx].dch_mode == p_dcb->dch_mode))
+        {
+            success = TRUE;
+        }
+    }
+
+
+#if BTA_HL_DEBUG == TRUE
+
+    if (p_dcb->mtu != l2cap_cfg.mtu)
+    {
+        APPL_TRACE_WARNING2("MCAP and L2CAP peer mtu size out of sync from MCAP mtu=%d from l2cap mtu=%d",
+                            p_dcb->mtu, l2cap_cfg.mtu);
+    }
+
+    if (!success)
+    {
+        APPL_TRACE_DEBUG4("bta_hl_validate_chan_cfg success=%d app_idx=%d mcl_idx=%d mdl_idx=%d",success, app_idx, mcl_idx, mdl_idx);
+        APPL_TRACE_DEBUG3("Cur. L2cap cfg mtu=%d fcs=%d dch_mode=%d", l2cap_cfg.mtu, l2cap_cfg.fcs, p_dcb->dch_mode);
+        APPL_TRACE_DEBUG3("From saved: L2cap cfg mtu=%d fcs=%d dch_mode=%d", p_acb->mdl_cfg[mdl_cfg_idx].mtu,
+                          p_acb->mdl_cfg[mdl_cfg_idx].fcs , p_acb->mdl_cfg[mdl_cfg_idx].dch_mode);
+    }
+#endif
+
+    return success;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_is_cong_on
+**
+** Description    This function checks whether the congestion condition is on or not
+**
+** Returns      BOOLEAN - TRUE DCH is congested
+**                        FALSE not congested
+**
+*******************************************************************************/
+BOOLEAN  bta_hl_is_cong_on(UINT8 app_id, BD_ADDR bd_addr, tBTA_HL_MDL_ID mdl_id)
+
+{
+    tBTA_HL_MDL_CB      *p_dcb;
+    UINT8   app_idx, mcl_idx, mdl_idx;
+    BOOLEAN cong_status = TRUE;
+
+    if (bta_hl_find_app_idx(app_id, &app_idx))
+    {
+        if (bta_hl_find_mcl_idx(app_idx, bd_addr, &mcl_idx ))
+        {
+            if (bta_hl_find_mdl_idx(app_idx, mcl_idx, mdl_id, &mdl_idx ))
+            {
+                p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+                cong_status  = p_dcb->cong;
+            }
+        }
+    }
+
+    return cong_status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_check_cch_close
+**
+** Description   This function checks whether there is a pending CCH close request
+**               or not
+**
+** Returns      void
+*******************************************************************************/
+void bta_hl_check_cch_close(UINT8 app_idx, UINT8 mcl_idx, tBTA_HL_DATA *p_data, BOOLEAN check_dch_setup )
+{
+    tBTA_HL_MCL_CB      *p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_MDL_CB      *p_dcb;
+    UINT8               mdl_idx;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG1("bta_hl_check_cch_close cch_close_dch_oper=%d",p_mcb->cch_close_dch_oper );
+#endif
+
+    if (p_mcb->cch_oper == BTA_HL_CCH_OP_LOCAL_CLOSE)
+    {
+        if (check_dch_setup && bta_hl_find_dch_setup_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+        {
+            p_dcb = BTA_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+            if (!p_mcb->rsp_tout)
+            {
+                p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_ABORT;
+
+                if (!p_dcb->abort_oper)
+                {
+                    p_dcb->abort_oper |= BTA_HL_ABORT_CCH_CLOSE_MASK;
+                    bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_ABORT_EVT, p_data);
+                }
+            }
+            else
+            {
+                p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_CLOSE;
+                bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_CMPL_EVT, p_data);
+            }
+        }
+        else if (bta_hl_find_an_active_mdl_idx(app_idx, mcl_idx,&mdl_idx))
+        {
+            p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_CLOSE;
+            bta_hl_dch_sm_execute(app_idx, mcl_idx, mdl_idx, BTA_HL_DCH_CLOSE_EVT, p_data);
+        }
+        else
+        {
+            p_mcb->cch_close_dch_oper = BTA_HL_CCH_CLOSE_OP_DCH_NONE;
+            bta_hl_cch_sm_execute(app_idx, mcl_idx, BTA_HL_CCH_CLOSE_EVT, p_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_clean_app
+**
+** Description      Cleans up the HDP application resources and control block
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_clean_app(UINT8 app_idx)
+{
+    tBTA_HL_APP_CB         *p_acb   = BTA_HL_GET_APP_CB_PTR(app_idx);
+    int i, num_act_apps=0;
+
+#if BTA_HL_DEBUG == TRUE
+    APPL_TRACE_DEBUG0("bta_hl_clean_app");
+#endif
+    MCA_Deregister((tMCA_HANDLE)p_acb->app_handle);
+
+    if (p_acb->sdp_handle) SDP_DeleteRecord(p_acb->sdp_handle);
+
+    memset((void *) p_acb, 0, sizeof(tBTA_HL_APP_CB));
+
+    /* check any application is still active */
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb = BTA_HL_GET_APP_CB_PTR(i);
+        if (p_acb->in_use) num_act_apps++;
+    }
+
+    if (!num_act_apps)
+    {
+        bta_sys_remove_uuid(UUID_SERVCLASS_HDP_PROFILE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_check_deregistration
+**
+** Description   This function checks whether there is a pending deregistration
+**               request or not
+**
+** Returns      void
+*******************************************************************************/
+void bta_hl_check_deregistration(UINT8 app_idx, tBTA_HL_DATA *p_data )
+{
+    tBTA_HL_APP_CB      *p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_MCL_CB      *p_mcb;
+    UINT8               mcl_idx;
+    tBTA_HL             evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_check_deregistration");
+#endif
+
+    if (p_acb->deregistering)
+    {
+        if (bta_hl_find_an_in_use_mcl_idx(app_idx, &mcl_idx))
+        {
+            p_mcb  = BTA_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            if (p_mcb->cch_oper != BTA_HL_CCH_OP_LOCAL_CLOSE)
+            {
+                p_mcb->cch_oper = BTA_HL_CCH_OP_LOCAL_CLOSE;
+                bta_hl_check_cch_close(app_idx,mcl_idx,p_data, TRUE);
+            }
+        }
+        else
+        {
+            /* all cchs are closed */
+            evt_data.dereg_cfm.app_handle = p_acb->app_handle;
+            evt_data.dereg_cfm.status = BTA_HL_STATUS_OK;
+            p_acb->p_cback(BTA_HL_DEREGISTER_CFM_EVT, (tBTA_HL *) &evt_data );
+            bta_hl_clean_app(app_idx);
+            bta_hl_check_disable(p_data);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_check_disable
+**
+** Description   This function checks whether there is a pending disable
+**               request or not
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_hl_check_disable(tBTA_HL_DATA *p_data )
+{
+    tBTA_HL_CB          *p_cb= &bta_hl_cb;
+    tBTA_HL_APP_CB      *p_acb;
+    UINT8               app_idx;
+    tBTA_HL_CTRL        evt_data;
+
+#if (BTA_HL_DEBUG == TRUE)
+    APPL_TRACE_DEBUG0("bta_hl_check_disable");
+#endif
+
+    if (bta_hl_cb.disabling)
+    {
+        if (bta_hl_find_an_in_use_app_idx(&app_idx))
+        {
+            p_acb  = BTA_HL_GET_APP_CB_PTR(app_idx);
+            if (!p_acb->deregistering)
+            {
+                p_acb->deregistering = TRUE;
+                bta_hl_check_deregistration(app_idx, p_data);
+            }
+        }
+        else
+        {
+            /* all apps are deregistered */
+            bta_sys_deregister(BTA_ID_HL);
+            evt_data.disable_cfm.status = BTA_HL_STATUS_OK;
+            if (p_cb->p_ctrl_cback) p_cb->p_ctrl_cback(BTA_HL_CTRL_DISABLE_CFM_EVT, (tBTA_HL_CTRL *) &evt_data);
+            memset((void *) p_cb, 0, sizeof(tBTA_HL_CB));
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_abort_cfm
+**
+** Description   This function builds the abort confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_abort_cfm(tBTA_HL *p_evt_data,
+                             tBTA_HL_APP_HANDLE app_handle,
+                             tBTA_HL_MCL_HANDLE mcl_handle,
+                             tBTA_HL_STATUS status)
+{
+    p_evt_data->dch_abort_cfm.status = status;
+    p_evt_data->dch_abort_cfm.mcl_handle = mcl_handle;
+    p_evt_data->dch_abort_cfm.app_handle = app_handle;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_abort_ind
+**
+** Description   This function builds the abort indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_abort_ind(tBTA_HL *p_evt_data,
+                             tBTA_HL_APP_HANDLE app_handle,
+                             tBTA_HL_MCL_HANDLE mcl_handle)
+{
+    p_evt_data->dch_abort_ind.mcl_handle = mcl_handle;
+    p_evt_data->dch_abort_ind.app_handle = app_handle;
+}
+/*******************************************************************************
+**
+** Function      bta_hl_build_close_cfm
+**
+** Description   This function builds the close confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_dch_close_cfm(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 tBTA_HL_MDL_HANDLE mdl_handle,
+                                 tBTA_HL_STATUS status)
+{
+    p_evt_data->dch_close_cfm.status = status;
+    p_evt_data->dch_close_cfm.mdl_handle = mdl_handle;
+    p_evt_data->dch_close_cfm.mcl_handle = mcl_handle;
+    p_evt_data->dch_close_cfm.app_handle = app_handle;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_dch_close_ind
+**
+** Description   This function builds the close indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_dch_close_ind(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 tBTA_HL_MDL_HANDLE mdl_handle,
+                                 BOOLEAN intentional)
+{
+    p_evt_data->dch_close_ind.mdl_handle = mdl_handle;
+    p_evt_data->dch_close_ind.mcl_handle = mcl_handle;
+    p_evt_data->dch_close_ind.app_handle = app_handle;
+    p_evt_data->dch_close_ind.intentional = intentional;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_send_data_cfm
+**
+** Description   This function builds the send data confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_send_data_cfm(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 tBTA_HL_MDL_HANDLE mdl_handle,
+                                 tBTA_HL_STATUS status )
+{
+
+    p_evt_data->dch_send_data_cfm.mdl_handle = mdl_handle;
+    p_evt_data->dch_send_data_cfm.mcl_handle = mcl_handle;
+    p_evt_data->dch_send_data_cfm.app_handle = app_handle;
+    p_evt_data->dch_send_data_cfm.status = status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_rcv_data_ind
+**
+** Description   This function builds the received data indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_rcv_data_ind(tBTA_HL *p_evt_data,
+                                tBTA_HL_APP_HANDLE app_handle,
+                                tBTA_HL_MCL_HANDLE mcl_handle,
+                                tBTA_HL_MDL_HANDLE mdl_handle)
+{
+    p_evt_data->dch_rcv_data_ind.mdl_handle = mdl_handle;
+    p_evt_data->dch_rcv_data_ind.mcl_handle = mcl_handle;
+    p_evt_data->dch_rcv_data_ind.app_handle = app_handle;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_cch_open_cfm
+**
+** Description   This function builds the CCH open confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_cch_open_cfm(tBTA_HL *p_evt_data,
+                                tBTA_HL_APP_HANDLE app_handle,
+                                tBTA_HL_MCL_HANDLE mcl_handle,
+                                BD_ADDR bd_addr,
+                                tBTA_HL_STATUS status )
+{
+
+    p_evt_data->cch_open_cfm.app_handle = app_handle;
+    p_evt_data->cch_open_cfm.mcl_handle = mcl_handle;
+    bdcpy(p_evt_data->cch_open_cfm.bd_addr, bd_addr);
+    p_evt_data->cch_open_cfm.status = status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_cch_open_ind
+**
+** Description   This function builds the CCH open indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_cch_open_ind(tBTA_HL *p_evt_data, tBTA_HL_APP_HANDLE app_handle,
+                                tBTA_HL_MCL_HANDLE mcl_handle,
+                                BD_ADDR bd_addr )
+{
+
+    p_evt_data->cch_open_ind.app_handle = app_handle;
+    p_evt_data->cch_open_ind.mcl_handle = mcl_handle;
+    bdcpy(p_evt_data->cch_open_ind.bd_addr, bd_addr);
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_cch_close_cfm
+**
+** Description   This function builds the CCH close confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_cch_close_cfm(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 tBTA_HL_STATUS status )
+{
+    p_evt_data->cch_close_cfm.mcl_handle = mcl_handle;
+    p_evt_data->cch_close_cfm.app_handle = app_handle;
+    p_evt_data->cch_close_cfm.status = status;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_cch_close_ind
+**
+** Description   This function builds the CCH colse indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_cch_close_ind(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 BOOLEAN intentional)
+{
+    p_evt_data->cch_close_ind.mcl_handle = mcl_handle;
+    p_evt_data->cch_close_ind.app_handle = app_handle;
+    p_evt_data->cch_close_ind.intentional = intentional;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_dch_open_cfm
+**
+** Description   This function builds the DCH open confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_dch_open_cfm(tBTA_HL *p_evt_data,
+                                tBTA_HL_APP_HANDLE app_handle,
+                                tBTA_HL_MCL_HANDLE mcl_handle,
+                                tBTA_HL_MDL_HANDLE mdl_handle,
+                                tBTA_HL_MDEP_ID local_mdep_id,
+                                tBTA_HL_MDL_ID mdl_id,
+                                tBTA_HL_DCH_MODE dch_mode,
+                                BOOLEAN first_reliable,
+                                UINT16 mtu,
+                                tBTA_HL_STATUS status)
+
+{
+    p_evt_data->dch_open_cfm.mdl_handle = mdl_handle;
+    p_evt_data->dch_open_cfm.mcl_handle = mcl_handle;
+    p_evt_data->dch_open_cfm.app_handle = app_handle;
+    p_evt_data->dch_open_cfm.local_mdep_id = local_mdep_id;
+    p_evt_data->dch_open_cfm.mdl_id = mdl_id;
+    p_evt_data->dch_open_cfm.dch_mode = dch_mode;
+    p_evt_data->dch_open_cfm.first_reliable = first_reliable;
+    p_evt_data->dch_open_cfm.mtu = mtu;
+    p_evt_data->dch_open_cfm.status = status;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_sdp_query_cfm
+**
+** Description   This function builds the SDP query indication event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_sdp_query_cfm(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 BD_ADDR bd_addr,
+                                 tBTA_HL_SDP *p_sdp,
+                                 tBTA_HL_STATUS status)
+
+{
+    p_evt_data->sdp_query_cfm.app_handle = app_handle;
+    bdcpy(p_evt_data->sdp_query_cfm.bd_addr, bd_addr);
+    p_evt_data->sdp_query_cfm.p_sdp = p_sdp;
+    p_evt_data->sdp_query_cfm.status = status;
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_delete_mdl_cfm
+**
+** Description   This function builds the delete MDL confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_delete_mdl_cfm(tBTA_HL *p_evt_data,
+                                  tBTA_HL_APP_HANDLE app_handle,
+                                  tBTA_HL_MCL_HANDLE mcl_handle,
+                                  tBTA_HL_MDL_ID mdl_id,
+                                  tBTA_HL_STATUS status)
+
+{
+    p_evt_data->delete_mdl_cfm.mcl_handle = mcl_handle;
+    p_evt_data->delete_mdl_cfm.app_handle = app_handle;
+    p_evt_data->delete_mdl_cfm.mdl_id = mdl_id;
+    p_evt_data->delete_mdl_cfm.status = status;
+}
+
+/*******************************************************************************
+**
+** Function      bta_hl_build_echo_test_cfm
+**
+** Description   This function builds the echo test confirmation event data
+**
+** Returns      None
+**
+*******************************************************************************/
+void  bta_hl_build_echo_test_cfm(tBTA_HL *p_evt_data,
+                                 tBTA_HL_APP_HANDLE app_handle,
+                                 tBTA_HL_MCL_HANDLE mcl_handle,
+                                 tBTA_HL_STATUS status )
+{
+    p_evt_data->echo_test_cfm.mcl_handle = mcl_handle;
+    p_evt_data->echo_test_cfm.app_handle = app_handle;
+    p_evt_data->echo_test_cfm.status = status;
+}
+
+
+/*****************************************************************************
+**  Debug Functions
+*****************************************************************************/
+#if (BTA_HL_DEBUG == TRUE)
+
+/*******************************************************************************
+**
+** Function         bta_hl_status_code
+**
+** Description      get the status string pointer
+**
+** Returns          char * - status string pointer
+**
+*******************************************************************************/
+char *bta_hl_status_code(tBTA_HL_STATUS status)
+{
+    switch (status)
+    {
+        case BTA_HL_STATUS_OK:
+            return "BTA_HL_STATUS_OK";
+        case BTA_HL_STATUS_FAIL:
+            return "BTA_HL_STATUS_FAIL";
+        case BTA_HL_STATUS_ABORTED:
+            return "BTA_HL_STATUS_ABORTED";
+        case BTA_HL_STATUS_NO_RESOURCE:
+            return "BTA_HL_STATUS_NO_RESOURCE";
+        case BTA_HL_STATUS_LAST_ITEM:
+            return "BTA_HL_STATUS_LAST_ITEM";
+        case BTA_HL_STATUS_DUPLICATE_APP_ID:
+            return "BTA_HL_STATUS_DUPLICATE_APP_ID";
+        case BTA_HL_STATUS_INVALID_APP_HANDLE:
+            return "BTA_HL_STATUS_INVALID_APP_HANDLE";
+        case BTA_HL_STATUS_INVALID_MCL_HANDLE:
+            return "BTA_HL_STATUS_INVALID_MCL_HANDLE";
+        case BTA_HL_STATUS_MCAP_REG_FAIL:
+            return "BTA_HL_STATUS_MCAP_REG_FAIL";
+        case BTA_HL_STATUS_MDEP_CO_FAIL:
+            return "BTA_HL_STATUS_MDEP_CO_FAIL";
+        case BTA_HL_STATUS_ECHO_CO_FAIL:
+            return "BTA_HL_STATUS_ECHO_CO_FAIL";
+        case BTA_HL_STATUS_MDL_CFG_CO_FAIL:
+            return "BTA_HL_STATUS_MDL_CFG_CO_FAIL";
+        case BTA_HL_STATUS_SDP_NO_RESOURCE:
+            return "BTA_HL_STATUS_SDP_NO_RESOURCE";
+        case BTA_HL_STATUS_SDP_FAIL:
+            return "BTA_HL_STATUS_SDP_FAIL";
+        case BTA_HL_STATUS_NO_CCH:
+            return "BTA_HL_STATUS_NO_CCH";
+        case BTA_HL_STATUS_NO_MCL:
+            return "BTA_HL_STATUS_NO_MCL";
+
+        case BTA_HL_STATUS_NO_FIRST_RELIABLE:
+            return "BTA_HL_STATUS_NO_FIRST_RELIABLE";
+        case BTA_HL_STATUS_INVALID_DCH_CFG:
+            return "BTA_HL_STATUS_INVALID_DCH_CFG";
+        case BTA_HL_STATUS_INVALID_BD_ADDR:
+            return "BTA_HL_STATUS_INVALID_BD_ADDR";
+        case BTA_HL_STATUS_INVALID_RECONNECT_CFG:
+            return "BTA_HL_STATUS_INVALID_RECONNECT_CFG";
+        case BTA_HL_STATUS_ECHO_TEST_BUSY:
+            return "BTA_HL_STATUS_ECHO_TEST_BUSY";
+        case BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID:
+            return "BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID";
+        case BTA_HL_STATUS_INVALID_MDL_ID:
+            return "BTA_HL_STATUS_INVALID_MDL_ID";
+        case BTA_HL_STATUS_NO_MDL_ID_FOUND:
+            return "BTA_HL_STATUS_NO_MDL_ID_FOUND";
+        case BTA_HL_STATUS_DCH_BUSY:
+            return "BTA_HL_STATUS_DCH_BUSY";
+        default:
+            return "Unknown status code";
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_hl_evt_code
+**
+** Description      Maps HL event code to the corresponding event string
+**
+** Returns          string pointer for the associated event name
+**
+*******************************************************************************/
+char *bta_hl_evt_code(tBTA_HL_INT_EVT evt_code)
+{
+    switch (evt_code)
+    {
+        case BTA_HL_CCH_OPEN_EVT:
+            return "BTA_HL_CCH_OPEN_EVT";
+        case BTA_HL_CCH_SDP_OK_EVT:
+            return "BTA_HL_CCH_SDP_OK_EVT";
+        case BTA_HL_CCH_SDP_FAIL_EVT:
+            return "BTA_HL_CCH_SDP_FAIL_EVT";
+        case BTA_HL_MCA_CONNECT_IND_EVT:
+            return "BTA_HL_MCA_CONNECT_IND_EVT";
+        case BTA_HL_MCA_DISCONNECT_IND_EVT:
+            return "BTA_HL_MCA_DISCONNECT_IND_EVT";
+
+        case BTA_HL_CCH_CLOSE_EVT:
+            return "BTA_HL_CCH_CLOSE_EVT";
+        case BTA_HL_CCH_CLOSE_CMPL_EVT:
+            return "BTA_HL_CCH_CLOSE_CMPL_EVT";
+        case BTA_HL_DCH_OPEN_EVT:
+            return "BTA_HL_DCH_OPEN_EVT";
+        case BTA_HL_MCA_CREATE_IND_EVT:
+            return "BTA_HL_MCA_CREATE_IND_EVT";
+        case BTA_HL_MCA_CREATE_CFM_EVT:
+            return "BTA_HL_MCA_CREATE_CFM_EVT";
+        case BTA_HL_MCA_OPEN_IND_EVT:
+            return "BTA_HL_MCA_OPEN_IND_EVT";
+        case BTA_HL_MCA_OPEN_CFM_EVT:
+            return "BTA_HL_MCA_OPEN_CFM_EVT";
+        case BTA_HL_DCH_CLOSE_EVT:
+            return "BTA_HL_DCH_CLOSE_EVT";
+        case BTA_HL_MCA_CLOSE_IND_EVT:
+            return "BTA_HL_MCA_CLOSE_IND_EVT";
+        case BTA_HL_MCA_CLOSE_CFM_EVT:
+            return "BTA_HL_MCA_CLOSE_CFM_EVT";
+        case BTA_HL_API_SEND_DATA_EVT:
+            return "BTA_HL_API_SEND_DATA_EVT";
+        case BTA_HL_MCA_RCV_DATA_EVT:
+            return "BTA_HL_MCA_RCV_DATA_EVT";
+        case BTA_HL_DCH_CLOSE_CMPL_EVT:
+            return "BTA_HL_DCH_CLOSE_CMPL_EVT";
+
+        case BTA_HL_API_ENABLE_EVT:
+            return "BTA_HL_API_ENABLE_EVT";
+        case BTA_HL_API_DISABLE_EVT:
+            return "BTA_HL_API_DISABLE_EVT";
+        case BTA_HL_API_REGISTER_EVT:
+            return "BTA_HL_API_REGISTER_EVT";
+        case BTA_HL_API_DEREGISTER_EVT:
+            return "BTA_HL_API_DEREGISTER_EVT";
+
+        case BTA_HL_API_CCH_OPEN_EVT:
+            return "BTA_HL_API_CCH_OPEN_EVT";
+
+        case BTA_HL_API_CCH_CLOSE_EVT:
+            return "BTA_HL_API_CCH_CLOSE_EVT";
+        case BTA_HL_API_DCH_OPEN_EVT:
+            return "BTA_HL_API_DCH_OPEN_EVT";
+
+        case BTA_HL_API_DCH_RECONNECT_EVT:
+            return "BTA_HL_API_DCH_RECONNECT_EVT";
+        case BTA_HL_API_DCH_CLOSE_EVT:
+            return "BTA_HL_API_DCH_CLOSE_EVT";
+        case BTA_HL_API_DELETE_MDL_EVT:
+            return "BTA_HL_API_DELETE_MDL_EVT";
+        case BTA_HL_API_DCH_ABORT_EVT:
+            return "BTA_HL_API_DCH_ABORT_EVT";
+
+        case BTA_HL_DCH_RECONNECT_EVT:
+            return "BTA_HL_DCH_RECONNECT_EVT";
+        case BTA_HL_DCH_SDP_INIT_EVT:
+            return "BTA_HL_DCH_SDP_INIT_EVT";
+        case BTA_HL_DCH_SDP_FAIL_EVT:
+            return "BTA_HL_DCH_SDP_FAIL_EVT";
+        case BTA_HL_API_DCH_ECHO_TEST_EVT:
+            return "BTA_HL_API_DCH_ECHO_TEST_EVT";
+        case BTA_HL_DCH_CLOSE_ECHO_TEST_EVT:
+            return "BTA_HL_DCH_CLOSE_ECHO_TEST_EVT";
+        case BTA_HL_MCA_RECONNECT_IND_EVT:
+            return "BTA_HL_MCA_RECONNECT_IND_EVT";
+        case BTA_HL_MCA_RECONNECT_CFM_EVT:
+            return "BTA_HL_MCA_RECONNECT_CFM_EVT";
+        case BTA_HL_API_DCH_CREATE_RSP_EVT:
+            return "BTA_HL_API_DCH_CREATE_RSP_EVT";
+        case BTA_HL_DCH_ABORT_EVT:
+            return "BTA_HL_DCH_ABORT_EVT";
+        case BTA_HL_MCA_ABORT_IND_EVT:
+            return "BTA_HL_MCA_ABORT_IND_EVT";
+        case BTA_HL_MCA_ABORT_CFM_EVT:
+            return "BTA_HL_MCA_ABORT_CFM_EVT";
+        case BTA_HL_MCA_DELETE_IND_EVT:
+            return "BTA_HL_MCA_DELETE_IND_EVT";
+        case BTA_HL_MCA_DELETE_CFM_EVT:
+            return "BTA_HL_MCA_DELETE_CFM_EVT";
+        case BTA_HL_MCA_CONG_CHG_EVT:
+            return "BTA_HL_MCA_CONG_CHG_EVT";
+        case BTA_HL_CI_GET_TX_DATA_EVT:
+            return "BTA_HL_CI_GET_TX_DATA_EVT";
+        case BTA_HL_CI_PUT_RX_DATA_EVT:
+            return "BTA_HL_CI_PUT_RX_DATA_EVT";
+        case BTA_HL_CI_GET_ECHO_DATA_EVT:
+            return "BTA_HL_CI_GET_ECHO_DATA_EVT";
+        case BTA_HL_DCH_ECHO_TEST_EVT:
+            return "BTA_HL_DCH_ECHO_TEST_EVT";
+        case BTA_HL_CI_PUT_ECHO_DATA_EVT:
+            return "BTA_HL_CI_PUT_ECHO_DATA_EVT";
+        case BTA_HL_API_SDP_QUERY_EVT:
+            return "BTA_HL_API_SDP_QUERY_EVT";
+        case BTA_HL_SDP_QUERY_OK_EVT:
+            return "BTA_HL_SDP_QUERY_OK_EVT";
+        case BTA_HL_SDP_QUERY_FAIL_EVT:
+            return "BTA_HL_SDP_QUERY_FAIL_EVT";
+        case BTA_HL_MCA_RSP_TOUT_IND_EVT:
+            return "BTA_HL_MCA_RSP_TOUT_IND_EVT";
+
+        default:
+            return "Unknown HL event code";
+    }
+}
+
+#endif  /* Debug Functions */
+#endif // HL_INCLUDED
+
+
+
+
+
+
+
+
diff --git a/bta/include/bd.h b/bta/include/bd.h
new file mode 100644
index 0000000..33c3de1
--- /dev/null
+++ b/bta/include/bd.h
@@ -0,0 +1,102 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  BD address services.
+ *
+ ******************************************************************************/
+#ifndef BD_H
+#define BD_H
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* bd addr length and type */
+#ifndef BD_ADDR_LEN
+#define BD_ADDR_LEN     6
+typedef UINT8 BD_ADDR[BD_ADDR_LEN];
+#endif
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* global constant for "any" bd addr */
+extern const BD_ADDR bd_addr_any;
+extern const BD_ADDR bd_addr_null;
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bdcpy
+**
+** Description      Copy bd addr b to a.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bdcpy(BD_ADDR a, const BD_ADDR b);
+
+/*******************************************************************************
+**
+** Function         bdcmp
+**
+** Description      Compare bd addr b to a.
+**
+**
+** Returns          Zero if b==a, nonzero otherwise (like memcmp).
+**
+*******************************************************************************/
+extern int bdcmp(const BD_ADDR a, const BD_ADDR b);
+
+/*******************************************************************************
+**
+** Function         bdcmpany
+**
+** Description      Compare bd addr to "any" bd addr.
+**
+**
+** Returns          Zero if a equals bd_addr_any.
+**
+*******************************************************************************/
+extern int bdcmpany(const BD_ADDR a);
+
+/*******************************************************************************
+**
+** Function         bdsetany
+**
+** Description      Set bd addr to "any" bd addr.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bdsetany(BD_ADDR a);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BD_H */
+
diff --git a/bta/include/bta_ag_api.h b/bta/include/bta_ag_api.h
new file mode 100644
index 0000000..f16687c
--- /dev/null
+++ b/bta/include/bta_ag_api.h
@@ -0,0 +1,514 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the audio gateway (AG) subsystem
+ *  of BTA, Broadcom's Bluetooth application layer for mobile phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_AG_API_H
+#define BTA_AG_API_H
+
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* AG feature masks */
+#define BTA_AG_FEAT_3WAY    0x00000001   /* Three-way calling */
+#define BTA_AG_FEAT_ECNR    0x00000002   /* Echo cancellation and/or noise reduction */
+#define BTA_AG_FEAT_VREC    0x00000004   /* Voice recognition */
+#define BTA_AG_FEAT_INBAND  0x00000008   /* In-band ring tone */
+#define BTA_AG_FEAT_VTAG    0x00000010   /* Attach a phone number to a voice tag */
+#define BTA_AG_FEAT_REJECT  0x00000020   /* Ability to reject incoming call */
+#define BTA_AG_FEAT_ECS     0x00000040   /* Enhanced Call Status */
+#define BTA_AG_FEAT_ECC     0x00000080   /* Enhanced Call Control */
+#define BTA_AG_FEAT_EXTERR  0x00000100   /* Extended error codes */
+#define BTA_AG_FEAT_CODEC   0x00000200   /* Codec Negotiation */
+#define BTA_AG_FEAT_VOIP    0x00000400   /* VoIP call */
+/* Proprietary features: using 31 ~ 16 bits */
+#define BTA_AG_FEAT_BTRH    0x00010000   /* CCAP incoming call hold */
+#define BTA_AG_FEAT_UNAT    0x00020000   /* Pass unknown AT commands to application */
+#define BTA_AG_FEAT_NOSCO   0x00040000   /* No SCO control performed by BTA AG */
+#define BTA_AG_FEAT_NO_ESCO 0x00080000   /* Do not allow or use eSCO */
+
+typedef UINT32 tBTA_AG_FEAT;
+
+/* AG parse mode */
+#define BTA_AG_PARSE            0 /* Perform AT command parsing in AG */
+#define BTA_AG_PASS_THROUGH     1 /* Pass data directly to phone’s AT command interpreter */
+
+typedef UINT8 tBTA_AG_PARSE_MODE;
+
+/* AG open status */
+#define BTA_AG_SUCCESS          0 /* Connection successfully opened */
+#define BTA_AG_FAIL_SDP         1 /* Open failed due to SDP */
+#define BTA_AG_FAIL_RFCOMM      2 /* Open failed due to RFCOMM */
+#define BTA_AG_FAIL_RESOURCES   3 /* out of resources failure  */
+
+typedef UINT8 tBTA_AG_STATUS;
+
+/* handle values used with BTA_AgResult */
+#define BTA_AG_HANDLE_NONE      0
+#define BTA_AG_HANDLE_ALL       0xFFFF
+/* It is safe to use the same value as BTA_AG_HANDLE_ALL
+ * HANDLE_ALL is used for delivering indication
+ * SCO_NO_CHANGE is used for changing sco behavior
+ * They donot interfere with each other
+ */
+#define BTA_AG_HANDLE_SCO_NO_CHANGE 0xFFFF
+
+/* AG result codes used with BTA_AgResult */
+#define BTA_AG_SPK_RES              0   /* Update speaker volume */
+#define BTA_AG_MIC_RES              1   /* Update microphone volume */
+#define BTA_AG_INBAND_RING_RES      2   /* Update inband ring state */
+#define BTA_AG_CIND_RES             3   /* Send indicator response for AT+CIND */
+#define BTA_AG_BINP_RES             4   /* Send phone number for voice tag for AT+BINP */
+#define BTA_AG_IND_RES              5   /* Update an indicator value */
+#define BTA_AG_BVRA_RES             6   /* Update voice recognition state */
+#define BTA_AG_CNUM_RES             7   /* Send subscriber number response for AT+CNUM */
+#define BTA_AG_BTRH_RES             8   /* Send CCAP incoming call hold */
+#define BTA_AG_CLCC_RES             9   /* Query list of calls */
+#define BTA_AG_COPS_RES             10  /* Read network operator */
+#define BTA_AG_IN_CALL_RES          11  /* Indicate incoming phone call */
+#define BTA_AG_IN_CALL_CONN_RES     12  /* Incoming phone call connected */
+#define BTA_AG_CALL_WAIT_RES        13  /* Call waiting notification */
+#define BTA_AG_OUT_CALL_ORIG_RES    14  /* Outgoing phone call origination */
+#define BTA_AG_OUT_CALL_ALERT_RES   15  /* Outgoing phone call alerting remote party */
+#define BTA_AG_OUT_CALL_CONN_RES    16  /* Outgoing phone call connected */
+#define BTA_AG_CALL_CANCEL_RES      17  /* Incoming/outgoing 3-way canceled before connected */
+#define BTA_AG_END_CALL_RES         18  /* End call */
+#define BTA_AG_IN_CALL_HELD_RES     19  /* Incoming call held */
+#define BTA_AG_UNAT_RES             20  /* Response to unknown AT command event */
+
+typedef UINT8 tBTA_AG_RES;
+
+/* HFP peer features */
+#define BTA_AG_PEER_FEAT_ECNR       0x0001  /* Echo cancellation and/or noise reduction */
+#define BTA_AG_PEER_FEAT_3WAY       0x0002  /* Call waiting and three-way calling */
+#define BTA_AG_PEER_FEAT_CLI        0x0004  /* Caller ID presentation capability */
+#define BTA_AG_PEER_FEAT_VREC       0x0008  /* Voice recognition activation */
+#define BTA_AG_PEER_FEAT_VOL        0x0010  /* Remote volume control */
+#define BTA_AG_PEER_FEAT_ECS        0x0020  /* Enhanced Call Status */
+#define BTA_AG_PEER_FEAT_ECC        0x0040  /* Enhanced Call Control */
+#define BTA_AG_PEER_FEAT_CODEC      0x0080  /* Codec Negotiation */
+#define BTA_AG_PEER_FEAT_VOIP       0x0100  /* VoIP call */
+
+typedef UINT16 tBTA_AG_PEER_FEAT;
+
+/* HFP peer supported codec masks */
+#define BTA_AG_CODEC_NONE           BTM_SCO_CODEC_NONE
+#define BTA_AG_CODEC_CVSD           BTM_SCO_CODEC_CVSD      /* CVSD */
+#define BTA_AG_CODEC_MSBC           BTM_SCO_CODEC_MSBC      /* mSBC */
+typedef UINT16 tBTA_AG_PEER_CODEC;
+
+/* HFP errcode - Set when BTA_AG_OK_ERROR is returned in 'ok_flag' */
+#define BTA_AG_ERR_PHONE_FAILURE    0       /* Phone Failure */
+#define BTA_AG_ERR_NO_CONN_PHONE    1       /* No connection to phone */
+#define BTA_AG_ERR_OP_NOT_ALLOWED   3       /* Operation not allowed */
+#define BTA_AG_ERR_OP_NOT_SUPPORTED 4       /* Operation not supported */
+#define BTA_AG_ERR_PHSIM_PIN_REQ    5       /* PH-SIM PIN required */
+#define BTA_AG_ERR_SIM_NOT_INSERTED 10      /* SIM not inserted */
+#define BTA_AG_ERR_SIM_PIN_REQ      11      /* SIM PIN required */
+#define BTA_AG_ERR_SIM_PUK_REQ      12      /* SIM PUK required */
+#define BTA_AG_ERR_SIM_FAILURE      13      /* SIM failure */
+#define BTA_AG_ERR_SIM_BUSY         14      /* SIM busy */
+#define BTA_AG_ERR_INCORRECT_PWD    16      /* Incorrect password */
+#define BTA_AG_ERR_SIM_PIN2_REQ     17      /* SIM PIN2 required */
+#define BTA_AG_ERR_SIM_PUK2_REQ     18      /* SIM PUK2 required */
+#define BTA_AG_ERR_MEMORY_FULL      20      /* Memory full */
+#define BTA_AG_ERR_INVALID_INDEX    21      /* Invalid index */
+#define BTA_AG_ERR_MEMORY_FAILURE   23      /* Memory failure */
+#define BTA_AG_ERR_TEXT_TOO_LONG    24      /* Text string too long */
+#define BTA_AG_ERR_INV_CHAR_IN_TSTR 25      /* Invalid characters in text string */
+#define BTA_AG_ERR_DSTR_TOO_LONG    26      /* Dial string too long */
+#define BTA_AG_ERR_INV_CHAR_IN_DSTR 27      /* Invalid characters in dial string */
+#define BTA_AG_ERR_NO_NETWORK_SERV  30      /* No network service */
+#define BTA_AG_ERR_NETWORK_TIME_OUT 31      /* Network timeout */
+#define BTA_AG_ERR_NO_NET_EMG_ONLY  32      /* Network not allowed - emergency service only */
+#define BTA_AG_ERR_VOIP_CS_CALLS    33      /* AG cannot create simultaneous VoIP and CS calls */
+#define BTA_AG_ERR_NOT_FOR_VOIP     34      /* Not supported on this call type(VoIP) */
+#define BTA_AG_ERR_SIP_RESP_CODE    35      /* SIP 3 digit response code */
+
+#if 0   /* Not Used in Bluetooth HFP 1.5 Specification */
+#define BTA_AG_ERR_PHADAP_LNK_RES   2       /* Phone-adapter link reserved */
+#define BTA_AG_ERR_PHFSIM_PIN_REQ   6       /* PH-FSIM PIN required */
+#define BTA_AG_ERR_PHFSIM_PUK_REQ   7       /* PH-FSIM PUK required */
+#define BTA_AG_ERR_SIM_WRONG        15      /* SIM wrong */
+#define BTA_AG_ERR_NOT_FOUND        22      /* Not found */
+#define BTA_AG_ERR_NETWORK_TIMEOUT  31      /* Network timeout */
+#define BTA_AG_ERR_NET_PIN_REQ      40      /* Network personalization PIN required */
+#define BTA_AG_ERR_NET_PUK_REQ      41      /* Network personalization PUK required */
+#define BTA_AG_ERR_SUBSET_PIN_REQ   42      /* Network subset personalization PIN required */
+#define BTA_AG_ERR_SUBSET_PUK_REQ   43      /* Network subset personalization PUK required */
+#define BTA_AG_ERR_SERVPRO_PIN_REQ  44      /* Service provider personalization PIN required */
+#define BTA_AG_ERR_SERVPRO_PUK_REQ  45      /* Service provider personalization PUK required */
+#define BTA_AG_ERR_CORP_PIN_REQ     46      /* Corporate personalization PIN required */
+#define BTA_AG_ERR_CORP_PUK_REQ     47      /* Corporate personalization PUK required */
+#define BTA_AG_ERR_UNKNOWN          100    /* Unknown error */
+/* GPRS-related errors */
+#define BTA_AG_ERR_ILL_MS           103    /* Illegal MS (#3) */
+#define BTA_AG_ERR_ILL_ME           106    /* Illegal ME (#6) */
+#define BTA_AG_ERR_GPRS_NOT_ALLOWED 107    /* GPRS services not allowed (#7) */
+#define BTA_AG_ERR_PLMN_NOT_ALLOWED 111    /* PLMN services not allowed (#11) */
+#define BTA_AG_ERR_LOC_NOT_ALLOWED  112    /* Location area not allowed (#12) */
+#define BTA_AG_ERR_ROAM_NOT_ALLOWED 113    /* Roaming not allowed in this location area (#13) */
+/* Errors related to a failure to Activate a Context */
+#define BTA_AG_ERR_OPT_NOT_SUPP     132    /* Service option not supported (#32) */
+#define BTA_AG_ERR_OPT_NOT_SUBSCR   133    /* Requested service option not subscribed (#33) */
+#define BTA_AG_ERR_OPT_OUT_OF_ORDER 134    /* Service option temporarily out of order (#34) */
+#define BTA_AG_ERR_PDP_AUTH_FAILURE 149    /* PDP authentication failure */
+/* Other GPRS errors */
+#define BTA_AG_ERR_INV_MOBILE_CLASS 150    /* Invalid mobile class */
+#define BTA_AG_ERR_UNSPEC_GPRS_ERR  148    /* Unspecified GPRS error */
+#endif  /* Unused error codes */
+
+
+/* HFP result data 'ok_flag' */
+#define BTA_AG_OK_CONTINUE          0       /* Send out response (more responses coming) */
+#define BTA_AG_OK_DONE              1       /* Send out response followed by OK (finished) */
+#define BTA_AG_OK_ERROR             2       /* Error response */
+
+/* BTRH values */
+#define BTA_AG_BTRH_SET_HOLD        0       /* Put incoming call on hold */
+#define BTA_AG_BTRH_SET_ACC         1       /* Accept incoming call on hold */
+#define BTA_AG_BTRH_SET_REJ         2       /* Reject incoming call on hold */
+#define BTA_AG_BTRH_READ            3       /* Read the current value */
+#define BTA_AG_BTRH_NO_RESP         4       /* Not in RH States (reply to read) */
+
+/* ASCII character string of arguments to the AT command or result */
+#ifndef BTA_AG_AT_MAX_LEN
+#define BTA_AG_AT_MAX_LEN           256
+#endif
+
+/* data associated with BTA_AG_IND_RES */
+typedef struct
+{
+    UINT16          id;
+    UINT16          value;
+} tBTA_AG_IND;
+
+/* data type for BTA_AgResult() */
+typedef struct
+{
+    char            str[BTA_AG_AT_MAX_LEN+1];
+    tBTA_AG_IND     ind;
+    UINT16          num;
+    UINT16          audio_handle;
+    UINT16          errcode;        /* Valid only if 'ok_flag' is set to BTA_AG_OK_ERROR */
+    UINT8           ok_flag;        /* Indicates if response is finished, and if error occurred */
+    BOOLEAN         state;
+} tBTA_AG_RES_DATA;
+
+/* AG callback events */
+#define BTA_AG_ENABLE_EVT       0  /* AG enabled */
+#define BTA_AG_REGISTER_EVT     1  /* AG registered */
+#define BTA_AG_OPEN_EVT         2  /* AG connection open */
+#define BTA_AG_CLOSE_EVT        3  /* AG connection closed */
+#define BTA_AG_CONN_EVT         4  /* Service level connection opened */
+#define BTA_AG_AUDIO_OPEN_EVT   5  /* Audio connection open */
+#define BTA_AG_AUDIO_CLOSE_EVT  6  /* Audio connection closed */
+#define BTA_AG_SPK_EVT          7  /* Speaker volume changed */
+#define BTA_AG_MIC_EVT          8  /* Microphone volume changed */
+#define BTA_AG_AT_CKPD_EVT      9  /* CKPD from the HS */
+#define BTA_AG_DISABLE_EVT      30 /* AG disabled       */
+
+/* Values below are for HFP only */
+#define BTA_AG_AT_A_EVT         10 /* Answer a call */
+#define BTA_AG_AT_D_EVT         11 /* Place a call using number or memory dial */
+#define BTA_AG_AT_CHLD_EVT      12 /* Call hold */
+#define BTA_AG_AT_CHUP_EVT      13 /* Hang up a call */
+#define BTA_AG_AT_CIND_EVT      14 /* Read indicator settings */
+#define BTA_AG_AT_VTS_EVT       15 /* Transmit DTMF tone */
+#define BTA_AG_AT_BINP_EVT      16 /* Retrieve number from voice tag */
+#define BTA_AG_AT_BLDN_EVT      17 /* Place call to last dialed number */
+#define BTA_AG_AT_BVRA_EVT      18 /* Enable/disable voice recognition */
+#define BTA_AG_AT_NREC_EVT      19 /* Disable echo canceling */
+#define BTA_AG_AT_CNUM_EVT      20 /* Retrieve subscriber number */
+#define BTA_AG_AT_BTRH_EVT      21 /* CCAP-style incoming call hold */
+#define BTA_AG_AT_CLCC_EVT      22 /* Query list of current calls */
+#define BTA_AG_AT_COPS_EVT      23 /* Query list of current calls */
+#define BTA_AG_AT_UNAT_EVT      24 /* Unknown AT command */
+#define BTA_AG_AT_CBC_EVT       25 /* Battery Level report from HF */
+#define BTA_AG_AT_BAC_EVT       26 /* Codec select */
+#define BTA_AG_AT_BCS_EVT       27 /* Codec select */
+
+typedef UINT8 tBTA_AG_EVT;
+
+/* data associated with most non-AT events */
+typedef struct
+{
+    UINT16              handle;
+    UINT8               app_id;
+} tBTA_AG_HDR;
+
+/* data associated with BTA_AG_REGISTER_EVT */
+typedef struct
+{
+    tBTA_AG_HDR         hdr;
+    tBTA_AG_STATUS      status;
+} tBTA_AG_REGISTER;
+
+/* data associated with BTA_AG_OPEN_EVT */
+typedef struct
+{
+    tBTA_AG_HDR         hdr;
+    BD_ADDR             bd_addr;
+    tBTA_SERVICE_ID     service_id;
+    tBTA_AG_STATUS      status;
+} tBTA_AG_OPEN;
+
+/* data associated with BTA_AG_CONN_EVT */
+typedef struct
+{
+    tBTA_AG_HDR         hdr;
+    tBTA_AG_PEER_FEAT   peer_feat;
+    tBTA_AG_PEER_CODEC  peer_codec;
+} tBTA_AG_CONN;
+
+/* data associated with AT command event */
+typedef struct
+{
+    tBTA_AG_HDR         hdr;
+    char                str[BTA_AG_AT_MAX_LEN+1];
+    UINT16              num;
+    UINT8               idx;    /* call number used by CLCC and CHLD */
+} tBTA_AG_VAL;
+
+/* union of data associated with AG callback */
+typedef union
+{
+    tBTA_AG_HDR         hdr;
+    tBTA_AG_REGISTER    reg;
+    tBTA_AG_OPEN        open;
+    tBTA_AG_CONN        conn;
+    tBTA_AG_VAL         val;
+} tBTA_AG;
+
+/* AG callback */
+typedef void (tBTA_AG_CBACK)(tBTA_AG_EVT event, tBTA_AG *p_data);
+
+/* indicator constants HFP 1.1 and later */
+#define BTA_AG_IND_CALL             1   /* position of call indicator */
+#define BTA_AG_IND_CALLSETUP        2   /* position of callsetup indicator */
+#define BTA_AG_IND_SERVICE          3   /* position of service indicator */
+
+/* indicator constants HFP 1.5 and later */
+#define BTA_AG_IND_SIGNAL           4   /* position of signal strength indicator */
+#define BTA_AG_IND_ROAM             5   /* position of roaming indicator */
+#define BTA_AG_IND_BATTCHG          6   /* position of battery charge indicator */
+#define BTA_AG_IND_CALLHELD         7   /* position of callheld indicator */
+#define BTA_AG_IND_BEARER           8   /* position of bearer indicator */
+
+/* call indicator values */
+#define BTA_AG_CALL_INACTIVE        0   /* Phone call inactive */
+#define BTA_AG_CALL_ACTIVE          1   /* Phone call active */
+
+/* callsetup indicator values */
+#define BTA_AG_CALLSETUP_NONE       0   /* Not currently in call set up */
+#define BTA_AG_CALLSETUP_INCOMING   1   /* Incoming call process ongoing */
+#define BTA_AG_CALLSETUP_OUTGOING   2   /* Outgoing call set up is ongoing */
+#define BTA_AG_CALLSETUP_ALERTING   3   /* Remote party being alerted in an outgoing call */
+
+/* service indicator values */
+#define BTA_AG_SERVICE_NONE         0   /* Neither CS nor VoIP service is available     */
+#define BTA_AG_SERVICE_CS           1   /* Only CS service is available                 */
+#define BTA_AG_SERVICE_VOIP         2   /* Only VoIP service is available               */
+#define BTA_AG_SERVICE_CS_VOIP      3   /* Both CS and VoIP services available          */
+
+/* callheld indicator values */
+#define BTA_AG_CALLHELD_INACTIVE    0   /* No held calls */
+#define BTA_AG_CALLHELD_ACTIVE      1   /* Call held and call active */
+#define BTA_AG_CALLHELD_NOACTIVE    2   /* Call held and no call active */
+
+/* signal strength indicator values */
+#define BTA_AG_ROAMING_INACTIVE     0   /* Phone call inactive */
+#define BTA_AG_ROAMING_ACTIVE       1   /* Phone call active */
+
+/* bearer indicator values */
+#define BTA_AG_BEARER_WLAN          0   /* WLAN         */
+#define BTA_AG_BEARER_BLUETOOTH     1   /* Bluetooth    */
+#define BTA_AG_BEARER_WIRED         2   /* Wired        */
+#define BTA_AG_BEARER_2G3G          3   /* 2G 3G        */
+#define BTA_AG_BEARER_WIMAX         4   /* WIMAX        */
+#define BTA_AG_BEARER_RES1          5   /* Reserved     */
+#define BTA_AG_BEARER_RES2          6   /* Reserved     */
+#define BTA_AG_BEARER_RES3          7   /* Reserved     */
+
+/* AG configuration structure */
+typedef struct
+{
+    char         *cind_info;
+    INT32        conn_tout;
+    UINT16       sco_pkt_types;
+    char         *chld_val_ecc;
+    char         *chld_val;
+} tBTA_AG_CFG;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         BTA_AgEnable
+**
+** Description      Enable the audio gateway service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_AG_ENABLE_EVT. This function must
+**                  be called before other function in the AG API are
+**                  called.
+**
+** Returns          BTA_SUCCESS if OK, BTA_FAILURE otherwise.
+**
+*******************************************************************************/
+BTA_API tBTA_STATUS BTA_AgEnable(tBTA_AG_PARSE_MODE parse_mode, tBTA_AG_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_AgDisable
+**
+** Description      Disable the audio gateway service
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgDisable(void);
+
+/*******************************************************************************
+**
+** Function         BTA_AgRegister
+**
+** Description      Register an Audio Gateway service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgRegister(tBTA_SERVICE_MASK services, tBTA_SEC sec_mask,
+                tBTA_AG_FEAT features, char *p_service_names[], UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         BTA_AgDeregister
+**
+** Description      Deregister an audio gateway service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgDeregister(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AgOpen
+**
+** Description      Opens a connection to a headset or hands-free device.
+**                  When connection is open callback function is called
+**                  with a BTA_AG_OPEN_EVT. Only the data connection is
+**                  opened. The audio connection is not opened.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgOpen(UINT16 handle, BD_ADDR bd_addr, tBTA_SEC sec_mask, tBTA_SERVICE_MASK services);
+
+/*******************************************************************************
+**
+** Function         BTA_AgClose
+**
+** Description      Close the current connection to a headset or a handsfree
+**                  Any current audio connection will also be closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgClose(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AgAudioOpen
+**
+** Description      Opens an audio connection to the currently connected
+**                  headset or hnadsfree
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgAudioOpen(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AgAudioClose
+**
+** Description      Close the currently active audio connection to a headset
+**                  or hnadsfree. The data connection remains open
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgAudioClose(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AgResult
+**
+** Description      Send an AT result code to a headset or hands-free device.
+**                  This function is only used when the AG parse mode is set
+**                  to BTA_AG_PARSE.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgResult(UINT16 handle, tBTA_AG_RES result, tBTA_AG_RES_DATA *p_data);
+
+/*******************************************************************************
+**
+** Function         BTA_AgSetCodec
+**
+** Description      Specify the codec type to be used for the subsequent
+**                  audio connection.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AgSetCodec(UINT16 handle, tBTA_AG_PEER_CODEC codec);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_AG_API_H */
+
+
diff --git a/bta/include/bta_ag_ci.h b/bta/include/bta_ag_ci.h
new file mode 100644
index 0000000..3bc0e53
--- /dev/null
+++ b/bta/include/bta_ag_ci.h
@@ -0,0 +1,82 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for audio gateway call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_AG_CI_H
+#define BTA_AG_CI_H
+
+#include "bta_ag_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_ag_ci_rx_write
+**
+** Description      This function is called to send data to the AG when the AG
+**                  is configured for AT command pass-through.  The function
+**                  copies data to an event buffer and sends it.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_ci_rx_write(UINT16 handle, char *p_data, UINT16 len);
+
+/******************************************************************************
+**
+** Function         bta_ag_ci_slc_ready
+**
+** Description      This function is called to notify AG that SLC is up at
+**                  the application. This funcion is only used when the app
+**                  is running in pass-through mode.
+**
+** Returns          void
+**
+******************************************************************************/
+BTA_API extern void bta_ag_ci_slc_ready(UINT16 handle);
+
+// btla-specific ++
+/******************************************************************************
+**
+** Function         bta_ag_ci_wbs_command
+**
+** Description      This function is called to notify AG that a WBS command is
+**                  received
+**
+** Returns          void
+**
+******************************************************************************/
+BTA_API extern void bta_ag_ci_wbs_command (UINT16 handle, char *p_data, UINT16 len);
+// btla-specific --
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_AG_CI_H */
+
diff --git a/bta/include/bta_ag_co.h b/bta/include/bta_ag_co.h
new file mode 100644
index 0000000..c6a3392
--- /dev/null
+++ b/bta/include/bta_ag_co.h
@@ -0,0 +1,112 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for audio gateway call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_AG_CO_H
+#define BTA_AG_CO_H
+
+#include "bta_ag_api.h"
+
+/* Definitions for audio state callout function "state" parameter */
+#define BTA_AG_CO_AUD_STATE_OFF         0
+#define BTA_AG_CO_AUD_STATE_OFF_XFER    1   /* Closed pending transfer of audio */
+#define BTA_AG_CO_AUD_STATE_ON          2
+#define BTA_AG_CO_AUD_STATE_SETUP       3
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_init
+**
+** Description      This callout function is executed by AG when it is
+**                  started by calling BTA_AgEnable().  This function can be
+**                  used by the phone to initialize audio paths or for other
+**                  initialization purposes.
+**
+**
+** Returns          Void.
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_co_init(void);
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_audio_state
+**
+** Description      This function is called by the AG before the audio connection
+**                  is brought up, after it comes up, and after it goes down.
+**
+** Parameters       handle - handle of the AG instance
+**                  state - Audio state
+**                      BTA_AG_CO_AUD_STATE_OFF      - Audio has been turned off
+**                      BTA_AG_CO_AUD_STATE_OFF_XFER - Audio is closed pending transfer
+**                      BTA_AG_CO_AUD_STATE_ON       - Audio has been turned on
+**                      BTA_AG_CO_AUD_STATE_SETUP    - Audio is about to be turned on
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_co_audio_state(UINT16 handle, UINT8 app_id, UINT8 state);
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_data_open
+**
+** Description      This function is executed by AG when a service level connection
+**                  is opened.  The phone can use this function to set
+**                  up data paths or perform any required initialization or
+**                  set up particular to the connected service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_co_data_open(UINT16 handle, tBTA_SERVICE_ID service);
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_data_close
+**
+** Description      This function is called by AG when a service level
+**                  connection is closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_co_data_close(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_tx_write
+**
+** Description      This function is called by the AG to send data to the
+**                  phone when the AG is configured for AT command pass-through.
+**                  The implementation of this function must copy the data to
+**                  the phone’s memory.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_ag_co_tx_write(UINT16 handle, UINT8 *p_data, UINT16 len);
+
+#endif /* BTA_AG_CO_H */
+
diff --git a/bta/include/bta_api.h b/bta/include/bta_api.h
new file mode 100644
index 0000000..81dff39
--- /dev/null
+++ b/bta/include/bta_api.h
@@ -0,0 +1,1730 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for BTA, Broadcom's Bluetooth
+ *  application layer for mobile phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_API_H
+#define BTA_API_H
+
+#include "data_types.h"
+#include "bt_target.h"
+#include "bt_types.h"
+#include "btm_api.h"
+#include "uipc_msg.h"
+
+#if BLE_INCLUDED == TRUE
+#include "btm_ble_api.h"
+#endif
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* Status Return Value */
+#define BTA_SUCCESS             0           /* Successful operation. */
+#define BTA_FAILURE             1           /* Generic failure. */
+#define BTA_PENDING             2           /* API cannot be completed right now */
+#define BTA_BUSY                3
+#define BTA_NO_RESOURCES        4
+#define BTA_WRONG_MODE          5
+
+typedef UINT8 tBTA_STATUS;
+
+/*
+ * Service ID
+ *
+ * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID,
+ *        make sure that the correct security ID of the new service from Security service definitions (btm_api.h)
+ *        should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c.
+ */
+
+#define BTA_RES_SERVICE_ID      0           /* Reserved */
+#define BTA_SPP_SERVICE_ID      1           /* Serial port profile. */
+#define BTA_DUN_SERVICE_ID      2           /* Dial-up networking profile. */
+#define BTA_A2DP_SOURCE_SERVICE_ID      3   /* A2DP Source profile. */
+#define BTA_LAP_SERVICE_ID      4           /* LAN access profile. */
+#define BTA_HSP_SERVICE_ID      5           /* Headset profile. */
+#define BTA_HFP_SERVICE_ID      6           /* Hands-free profile. */
+#define BTA_OPP_SERVICE_ID      7           /* Object push  */
+#define BTA_FTP_SERVICE_ID      8           /* File transfer */
+#define BTA_CTP_SERVICE_ID      9           /* Cordless Terminal */
+#define BTA_ICP_SERVICE_ID      10          /* Intercom Terminal */
+#define BTA_SYNC_SERVICE_ID     11          /* Synchronization */
+#define BTA_BPP_SERVICE_ID      12          /* Basic printing profile */
+#define BTA_BIP_SERVICE_ID      13          /* Basic Imaging profile */
+#define BTA_PANU_SERVICE_ID     14          /* PAN User */
+#define BTA_NAP_SERVICE_ID      15          /* PAN Network access point */
+#define BTA_GN_SERVICE_ID       16          /* PAN Group Ad-hoc networks */
+#define BTA_SAP_SERVICE_ID      17          /* SIM Access profile */
+#define BTA_A2DP_SERVICE_ID     18          /* A2DP Sink */
+#define BTA_AVRCP_SERVICE_ID    19          /* A/V remote control */
+#define BTA_HID_SERVICE_ID      20          /* HID */
+#define BTA_VDP_SERVICE_ID      21          /* Video distribution */
+#define BTA_PBAP_SERVICE_ID     22          /* PhoneBook Access Server*/
+#define BTA_HSP_HS_SERVICE_ID   23          /* HFP HS role */
+#define BTA_HFP_HS_SERVICE_ID   24          /* HSP HS role */
+#define BTA_MAP_SERVICE_ID      25          /* Message Access Profile */
+#define BTA_MN_SERVICE_ID       26          /* Message Notification Service */
+#define BTA_HDP_SERVICE_ID      27          /* Health Device Profile */
+#define BTA_PCE_SERVICE_ID      28          /* PhoneBook Access Client*/
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+/* BLE profile service ID */
+#define BTA_BLE_SERVICE_ID      29          /* GATT profile */
+
+// btla-specific ++
+#define BTA_USER_SERVICE_ID     30          /* User requested UUID */
+
+#define BTA_MAX_SERVICE_ID      31
+// btla-specific --
+#else
+#define BTA_USER_SERVICE_ID     29          /* User requested UUID */
+#define BTA_MAX_SERVICE_ID      30
+#endif
+/* service IDs (BTM_SEC_SERVICE_FIRST_EMPTY + 1) to (BTM_SEC_MAX_SERVICES - 1)
+ * are used by BTA JV */
+#define BTA_FIRST_JV_SERVICE_ID     (BTM_SEC_SERVICE_FIRST_EMPTY + 1)
+#define BTA_LAST_JV_SERVICE_ID      (BTM_SEC_MAX_SERVICES - 1)
+
+typedef UINT8 tBTA_SERVICE_ID;
+
+/* Service ID Mask */
+#define BTA_RES_SERVICE_MASK        0x00000001  /* Reserved */
+#define BTA_SPP_SERVICE_MASK        0x00000002  /* Serial port profile. */
+#define BTA_DUN_SERVICE_MASK        0x00000004  /* Dial-up networking profile. */
+#define BTA_FAX_SERVICE_MASK        0x00000008  /* Fax profile. */
+#define BTA_LAP_SERVICE_MASK        0x00000010  /* LAN access profile. */
+#define BTA_HSP_SERVICE_MASK        0x00000020  /* HSP AG role. */
+#define BTA_HFP_SERVICE_MASK        0x00000040  /* HFP AG role */
+#define BTA_OPP_SERVICE_MASK        0x00000080  /* Object push  */
+#define BTA_FTP_SERVICE_MASK        0x00000100  /* File transfer */
+#define BTA_CTP_SERVICE_MASK        0x00000200  /* Cordless Terminal */
+#define BTA_ICP_SERVICE_MASK        0x00000400  /* Intercom Terminal */
+#define BTA_SYNC_SERVICE_MASK       0x00000800  /* Synchronization */
+#define BTA_BPP_SERVICE_MASK        0x00001000  /* Print server */
+#define BTA_BIP_SERVICE_MASK        0x00002000  /* Basic Imaging */
+#define BTA_PANU_SERVICE_MASK       0x00004000  /* PAN User */
+#define BTA_NAP_SERVICE_MASK        0x00008000  /* PAN Network access point */
+#define BTA_GN_SERVICE_MASK         0x00010000  /* PAN Group Ad-hoc networks */
+#define BTA_SAP_SERVICE_MASK        0x00020000  /* PAN Group Ad-hoc networks */
+#define BTA_A2DP_SERVICE_MASK       0x00040000  /* Advanced audio distribution */
+#define BTA_AVRCP_SERVICE_MASK      0x00080000  /* A/V remote control */
+#define BTA_HID_SERVICE_MASK        0x00100000  /* HID */
+#define BTA_VDP_SERVICE_MASK        0x00200000  /* Video distribution */
+#define BTA_PBAP_SERVICE_MASK       0x00400000  /* Phone Book Server */
+#define BTA_HSP_HS_SERVICE_MASK     0x00800000  /* HFP HS role */
+#define BTA_HFP_HS_SERVICE_MASK     0x01000000  /* HSP HS role */
+#define BTA_MAS_SERVICE_MASK        0x02000000  /* Message Access Profile */
+#define BTA_MN_SERVICE_MASK         0x04000000  /* Message Notification Profile */
+#define BTA_HL_SERVICE_MASK         0x08000000  /* Health Device Profile */
+#define BTA_PCE_SERVICE_MASK        0x10000000  /* Phone Book Client */
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+#define BTA_BLE_SERVICE_MASK        0x20000000  /* GATT based service */
+// btla-specific ++
+#define BTA_USER_SERVICE_MASK       0x40000000  /* Message Notification Profile */
+// btla-specific --
+#else
+// btla-specific ++
+#define BTA_USER_SERVICE_MASK       0x20000000  /* Message Notification Profile */
+// btla-specific --
+#endif
+
+#if BLE_INCLUDED == TRUE && BTA_GATT_INCLUDED == TRUE
+#define BTA_ALL_SERVICE_MASK        0x3FFFFFFF  /* All services supported by BTA. */
+#else
+#define BTA_ALL_SERVICE_MASK        0x1FFFFFFF  /* All services supported by BTA. */
+#endif
+
+typedef UINT32 tBTA_SERVICE_MASK;
+
+/* extended service mask, including mask with one or more GATT UUID */
+typedef struct
+{
+    tBTA_SERVICE_MASK   srvc_mask;
+    UINT8               num_uuid;
+    tBT_UUID            *p_uuid;
+}tBTA_SERVICE_MASK_EXT;
+
+/* Security Setting Mask */
+#define BTA_SEC_NONE            BTM_SEC_NONE                                         /* No security. */
+#define BTA_SEC_AUTHORIZE       (BTM_SEC_IN_AUTHORIZE )                              /* Authorization required (only needed for out going connection )*/
+#define BTA_SEC_AUTHENTICATE    (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE) /* Authentication required. */
+#define BTA_SEC_ENCRYPT         (BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT)           /* Encryption required. */
+
+typedef UINT8 tBTA_SEC;
+
+/* Ignore for Discoverable, Connectable, Pairable and Connectable Paired only device modes */
+
+#define BTA_DM_IGNORE           0xFF
+
+
+/* Discoverable Modes */
+#define BTA_DM_NON_DISC         BTM_NON_DISCOVERABLE        /* Device is not discoverable. */
+#define BTA_DM_GENERAL_DISC     BTM_GENERAL_DISCOVERABLE    /* General discoverable. */
+#define BTA_DM_LIMITED_DISC     BTM_LIMITED_DISCOVERABLE    /* Limited discoverable. */
+
+// btla-specific ++
+typedef UINT16 tBTA_DM_DISC;
+// btla-specific --
+
+/* Connectable Modes */
+#define BTA_DM_NON_CONN         BTM_NON_CONNECTABLE         /* Device is not connectable. */
+#define BTA_DM_CONN             BTM_CONNECTABLE             /* Device is connectable. */
+
+// btla-specific ++
+typedef UINT16 tBTA_DM_CONN;
+// btla-specific --
+
+/* Pairable Modes */
+#define BTA_DM_PAIRABLE         1
+#define BTA_DM_NON_PAIRABLE     0
+
+/* Connectable Paired Only Mode */
+#define BTA_DM_CONN_ALL         0
+#define BTA_DM_CONN_PAIRED      1
+
+/* Inquiry Modes */
+#define BTA_DM_GENERAL_INQUIRY  BTM_GENERAL_INQUIRY         /* Perform general inquiry. */
+#define BTA_DM_LIMITED_INQUIRY  BTM_LIMITED_INQUIRY         /* Perform limited inquiry. */
+
+#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
+#define BTA_BLE_INQUIRY_NONE    BTM_BLE_INQUIRY_NONE
+#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY      /* Perform LE general inquiry. */
+#define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY      /* Perform LE limited inquiry. */
+#endif
+typedef UINT8 tBTA_DM_INQ_MODE;
+
+/* Inquiry Filter Type */
+#define BTA_DM_INQ_CLR          BTM_CLR_INQUIRY_FILTER          /* Clear inquiry filter. */
+#define BTA_DM_INQ_DEV_CLASS    BTM_FILTER_COND_DEVICE_CLASS    /* Filter on device class. */
+#define BTA_DM_INQ_BD_ADDR      BTM_FILTER_COND_BD_ADDR         /* Filter on a specific  BD address. */
+
+typedef UINT8 tBTA_DM_INQ_FILT;
+
+/* Authorize Response */
+#define BTA_DM_AUTH_PERM        0      /* Authorized for future connections to the service */
+#define BTA_DM_AUTH_TEMP        1      /* Authorized for current connection only */
+#define BTA_DM_NOT_AUTH         2      /* Not authorized for the service */
+
+typedef UINT8 tBTA_AUTH_RESP;
+
+/* M/S preferred roles */
+#define BTA_ANY_ROLE          0x00
+#define BTA_MASTER_ROLE_PREF  0x01
+#define BTA_MASTER_ROLE_ONLY  0x02
+
+typedef UINT8 tBTA_PREF_ROLES;
+
+enum
+{
+
+    BTA_DM_NO_SCATTERNET,        /* Device doesn't support scatternet, it might
+                                    support "role switch during connection" for
+                                    an incoming connection, when it already has
+                                    another connection in master role */
+    BTA_DM_PARTIAL_SCATTERNET,   /* Device supports partial scatternet. It can have
+                                    simulateous connection in Master and Slave roles
+                                    for short period of time */
+    BTA_DM_FULL_SCATTERNET       /* Device can have simultaneous connection in master
+                                    and slave roles */
+
+};
+
+
+/* Inquiry filter device class condition */
+typedef struct
+{
+    DEV_CLASS       dev_class;        /* device class of interest */
+    DEV_CLASS       dev_class_mask;   /* mask to determine the bits of device class of interest */
+} tBTA_DM_COD_COND;
+
+
+/* Inquiry Filter Condition */
+typedef union
+{
+    BD_ADDR              bd_addr;            /* BD address of  device to filter. */
+    tBTA_DM_COD_COND     dev_class_cond;     /* Device class filter condition */
+} tBTA_DM_INQ_COND;
+
+/* Inquiry Parameters */
+typedef struct
+{
+    tBTA_DM_INQ_MODE    mode;           /* Inquiry mode, limited or general. */
+    UINT8               duration;       /* Inquiry duration in 1.28 sec units. */
+    UINT8               max_resps;      /* Maximum inquiry responses.  Set to zero for unlimited responses. */
+    BOOLEAN             report_dup;     /* report duplicated inquiry response with higher RSSI value */
+    tBTA_DM_INQ_FILT    filter_type;    /* Filter condition type. */
+    tBTA_DM_INQ_COND    filter_cond;    /* Filter condition data. */
+} tBTA_DM_INQ;
+
+typedef struct
+{
+    UINT8   bta_dm_eir_min_name_len;        /* minimum length of local name when it is shortened */
+#if (BTA_EIR_CANNED_UUID_LIST == TRUE)
+    UINT8   bta_dm_eir_uuid16_len;          /* length of 16-bit UUIDs */
+    UINT8  *bta_dm_eir_uuid16;              /* 16-bit UUIDs */
+#else
+    UINT32  uuid_mask[BTM_EIR_SERVICE_ARRAY_SIZE]; /* mask of UUID list in EIR */
+#endif
+    INT8   *bta_dm_eir_inq_tx_power;        /* Inquiry TX power         */
+    UINT8   bta_dm_eir_flag_len;            /* length of flags in bytes */
+    UINT8  *bta_dm_eir_flags;               /* flags for EIR */
+    UINT8   bta_dm_eir_manufac_spec_len;    /* length of manufacturer specific in bytes */
+    UINT8  *bta_dm_eir_manufac_spec;        /* manufacturer specific */
+} tBTA_DM_EIR_CONF;
+
+#if BLE_INCLUDED == TRUE
+/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
+#define BTA_BLE_LIMIT_DISC_FLAG     BTM_BLE_LIMIT_DISC_FLAG
+#define BTA_BLE_GEN_DISC_FLAG       BTM_BLE_GEN_DISC_FLAG
+#define BTA_BLE_BREDR_NOT_SPT       BTM_BLE_BREDR_NOT_SPT
+#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG
+#define BTA_BLE_ADV_FLAG_MASK       BTM_BLE_ADV_FLAG_MASK
+#define BTA_BLE_LIMIT_DISC_MASK     BTM_BLE_LIMIT_DISC_MASK
+
+#define BTA_BLE_AD_BIT_DEV_NAME     BTM_BLE_AD_BIT_DEV_NAME
+#define BTA_BLE_AD_BIT_FLAGS        BTM_BLE_AD_BIT_FLAGS
+#define BTA_BLE_AD_BIT_MANU         BTM_BLE_AD_BIT_MANU
+#define BTA_BLE_AD_BIT_TX_PWR       BTM_BLE_AD_BIT_TX_PWR
+#define BTA_BLE_AD_BIT_ATTR         BTM_BLE_AD_BIT_ATTR
+#define BTA_BLE_AD_BIT_INT_RANGE    BTM_BLE_AD_BIT_INT_RANGE
+#define BTA_BLE_AD_BIT_SERVICE      BTM_BLE_AD_BIT_SERVICE
+#define BTA_BLE_AD_BIT_SERVICE_SOL  BTM_BLE_AD_BIT_SERVICE_SOL
+#define BTA_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA
+#define BTA_BLE_AD_BIT_SIGN_DATA    BTM_BLE_AD_BIT_SIGN_DATA
+typedef  UINT16  tBTA_BLE_AD_MASK;
+
+/* slave preferred connection interval range */
+typedef struct
+{
+    UINT16  low;
+    UINT16  hi;
+
+}tBTA_BLE_INT_RANGE;
+
+/* Service tag supported in the device */
+typedef struct
+{
+    UINT8       num_service;
+    BOOLEAN     list_cmpl;
+    UINT16      *p_uuid;
+}tBTA_BLE_SERVICE;
+
+/* attribute data */
+typedef struct
+{
+    UINT16       uuid;
+    UINT16       data_len;
+    UINT8       *p_data;
+}tBTA_BLE_ATTR;
+
+#define BTA_BLE_NUM_AD_ATTR_MAX         BTM_BLE_NUM_AD_ATTR_MAX
+
+/* attribute list contained in adv data */
+typedef struct
+{
+    UINT8               num_attr;
+    tBTA_BLE_ATTR       attr_list[BTA_BLE_NUM_AD_ATTR_MAX];
+}tBTA_BLE_ATTR_DATA;
+
+typedef struct
+{
+    UINT8       len;
+    UINT8      *p_val;
+}tBTA_BLE_MANU;
+
+typedef struct
+{
+    tBTA_BLE_MANU       manu;        /* manufactuer data */
+    tBTA_BLE_INT_RANGE  int_range;      /* slave prefered conn interval range */
+    tBTA_BLE_SERVICE    services;       /* services */
+    tBTA_BLE_ATTR_DATA  attr;           /* attribute data */
+    UINT8               flag;
+}tBTA_BLE_ADV_DATA;
+
+/* These are the fields returned in each device adv packet.  It
+** is returned in the results callback if registered.
+*/
+typedef struct
+{
+    UINT8               conn_mode;
+    tBTA_BLE_AD_MASK    ad_mask;        /* mask of the valid adv data field */
+    UINT8               flag;
+    UINT8               tx_power_level;
+    UINT8               remote_name_len;
+    UINT8               *p_remote_name;
+    tBTA_BLE_ATTR_DATA  attr_data;
+    tBTA_BLE_SERVICE    service;
+} tBTA_BLE_INQ_DATA;
+#endif
+
+typedef INT8 tBTA_DM_RSSI_VALUE;
+typedef UINT8 tBTA_DM_LINK_QUALITY_VALUE;
+
+
+/* signal strength mask */
+#define BTA_SIG_STRENGTH_RSSI_MASK          1
+#define BTA_SIG_STRENGTH_LINK_QUALITY_MASK  2
+
+typedef UINT8 tBTA_SIG_STRENGTH_MASK;
+
+
+/* Security Callback Events */
+#define BTA_DM_ENABLE_EVT               0       /* Enable Event */
+#define BTA_DM_DISABLE_EVT              1       /* Disable Event */
+#define BTA_DM_PIN_REQ_EVT              2       /* PIN request. */
+#define BTA_DM_AUTH_CMPL_EVT            3       /* Authentication complete indication. */
+#define BTA_DM_AUTHORIZE_EVT            4       /* Authorization request. */
+#define BTA_DM_LINK_UP_EVT              5       /* Connection UP event */
+#define BTA_DM_LINK_DOWN_EVT            6       /* Connection DOWN event */
+#define BTA_DM_SIG_STRENGTH_EVT         7       /* Signal strength for bluetooth connection */
+#define BTA_DM_BUSY_LEVEL_EVT           8       /* System busy level */
+#define BTA_DM_BOND_CANCEL_CMPL_EVT     9       /* Bond cancel complete indication */
+#define BTA_DM_SP_CFM_REQ_EVT           10      /* Simple Pairing User Confirmation request. */
+#define BTA_DM_SP_KEY_NOTIF_EVT         11      /* Simple Pairing Passkey Notification */
+#define BTA_DM_SP_RMT_OOB_EVT           12      /* Simple Pairing Remote OOB Data request. */
+#define BTA_DM_SP_KEYPRESS_EVT          13      /* Key press notification event. */
+#define BTA_DM_ROLE_CHG_EVT             14      /* Role Change event. */
+#define BTA_DM_BLE_KEY_EVT              15      /* BLE SMP key event for peer device keys */
+#define BTA_DM_BLE_SEC_REQ_EVT          16      /* BLE SMP security request */
+#define BTA_DM_BLE_PASSKEY_NOTIF_EVT    17      /* SMP passkey notification event */
+#define BTA_DM_BLE_PASSKEY_REQ_EVT      18      /* SMP passkey request event */
+#define BTA_DM_BLE_OOB_REQ_EVT          19      /* SMP OOB request event */
+#define BTA_DM_BLE_LOCAL_IR_EVT         20      /* BLE local IR event */
+#define BTA_DM_BLE_LOCAL_ER_EVT         21      /* BLE local ER event */
+// btla-specific ++
+#define BTA_DM_BLE_AUTH_CMPL_EVT        22      /* BLE Auth complete */
+// btla-specific --
+#define BTA_DM_DEV_UNPAIRED_EVT         23
+#define BTA_DM_HW_ERROR_EVT             24      /* BT Chip H/W error */
+typedef UINT8 tBTA_DM_SEC_EVT;
+
+/* Structure associated with BTA_DM_ENABLE_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address of local device. */
+    tBTA_STATUS    status;
+} tBTA_DM_ENABLE;
+
+/* Structure associated with BTA_DM_PIN_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    BD_NAME         bd_name;            /* Name of peer device. */
+    DEV_CLASS       dev_class;          /* Class of Device */
+} tBTA_DM_PIN_REQ;
+
+/* BLE related definition */
+
+#define BTA_DM_AUTH_FAIL_BASE                   (HCI_ERR_MAX_ERR + 10)
+#define BTA_DM_AUTH_CONVERT_SMP_CODE(x)        (BTA_DM_AUTH_FAIL_BASE + (x))
+#define BTA_DM_AUTH_SMP_PASSKEY_FAIL             BTA_DM_AUTH_CONVERT_SMP_CODE (SMP_PASSKEY_ENTRY_FAIL)
+#define BTA_DM_AUTH_SMP_OOB_FAIL                (BTA_DM_AUTH_FAIL_BASE + SMP_OOB_FAIL)
+#define BTA_DM_AUTH_SMP_PAIR_AUTH_FAIL          (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_AUTH_FAIL)
+#define BTA_DM_AUTH_SMP_CONFIRM_VALUE_FAIL      (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_VALUE_ERR)
+#define BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT        (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_NOT_SUPPORT)
+#define BTA_DM_AUTH_SMP_ENC_KEY_SIZE            (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_KEY_SIZE)
+#define BTA_DM_AUTH_SMP_INVALID_CMD             (BTA_DM_AUTH_FAIL_BASE + SMP_INVALID_CMD)
+#define BTA_DM_AUTH_SMP_UNKNOWN_ERR             (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_FAIL_UNKNOWN)
+#define BTA_DM_AUTH_SMP_REPEATED_ATTEMPT        (BTA_DM_AUTH_FAIL_BASE + SMP_REPEATED_ATTEMPTS)
+#define BTA_DM_AUTH_SMP_INTERNAL_ERR            (BTA_DM_AUTH_FAIL_BASE + SMP_PAIR_INTERNAL_ERR)
+#define BTA_DM_AUTH_SMP_UNKNOWN_IO              (BTA_DM_AUTH_FAIL_BASE + SMP_UNKNOWN_IO_CAP)
+#define BTA_DM_AUTH_SMP_INIT_FAIL               (BTA_DM_AUTH_FAIL_BASE + SMP_INIT_FAIL)
+#define BTA_DM_AUTH_SMP_CONFIRM_FAIL            (BTA_DM_AUTH_FAIL_BASE + SMP_CONFIRM_FAIL)
+#define BTA_DM_AUTH_SMP_BUSY                    (BTA_DM_AUTH_FAIL_BASE + SMP_BUSY)
+#define BTA_DM_AUTH_SMP_ENC_FAIL                (BTA_DM_AUTH_FAIL_BASE + SMP_ENC_FAIL)
+#define BTA_DM_AUTH_SMP_RSP_TIMEOUT             (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT)
+
+/* connection parameter boundary value and dummy value */
+#define BTA_DM_BLE_SCAN_INT_MIN          BTM_BLE_SCAN_INT_MIN
+#define BTA_DM_BLE_SCAN_INT_MAX          BTM_BLE_SCAN_INT_MAX
+#define BTA_DM_BLE_SCAN_WIN_MIN          BTM_BLE_SCAN_WIN_MIN
+#define BTA_DM_BLE_SCAN_WIN_MAX          BTM_BLE_SCAN_WIN_MAX
+#define BTA_DM_BLE_CONN_INT_MIN          BTM_BLE_CONN_INT_MIN
+#define BTA_DM_BLE_CONN_INT_MAX          BTM_BLE_CONN_INT_MAX
+#define BTA_DM_BLE_CONN_LATENCY_MAX      BTM_BLE_CONN_LATENCY_MAX
+#define BTA_DM_BLE_CONN_SUP_TOUT_MIN     BTM_BLE_CONN_SUP_TOUT_MIN
+#define BTA_DM_BLE_CONN_SUP_TOUT_MAX     BTM_BLE_CONN_SUP_TOUT_MAX
+#define BTA_DM_BLE_CONN_PARAM_UNDEF      BTM_BLE_CONN_PARAM_UNDEF  /* use this value when a specific value not to be overwritten */
+
+
+#define BTA_LE_KEY_PENC      BTM_LE_KEY_PENC  /* encryption information of peer device */
+#define BTA_LE_KEY_PID       BTM_LE_KEY_PID   /* identity key of the peer device */
+#define BTA_LE_KEY_PCSRK     BTM_LE_KEY_PCSRK   /* peer SRK */
+#define BTA_LE_KEY_LENC      BTM_LE_KEY_LENC        /* master role security information:div */
+#define BTA_LE_KEY_LID       BTM_LE_KEY_LID         /* master device ID key */
+#define BTA_LE_KEY_LCSRK     BTM_LE_KEY_LCSRK        /* local CSRK has been deliver to peer */
+typedef UINT8 tBTA_LE_KEY_TYPE; /* can be used as a bit mask */
+
+
+typedef tBTM_LE_PENC_KEYS  tBTA_LE_PENC_KEYS ;
+typedef tBTM_LE_PCSRK_KEYS tBTA_LE_PCSRK_KEYS;
+typedef tBTM_LE_LENC_KEYS  tBTA_LE_LENC_KEYS  ;
+typedef tBTM_LE_LCSRK_KEYS tBTA_LE_LCSRK_KEYS ;
+
+typedef union
+{
+    tBTA_LE_PENC_KEYS   penc_key;       /* received peer encryption key */
+    tBTA_LE_PCSRK_KEYS  psrk_key;       /* received peer device SRK */
+    BT_OCTET16          pid_key;        /* peer device ID key */
+    tBTA_LE_LENC_KEYS   lenc_key;       /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
+    tBTA_LE_LCSRK_KEYS  lcsrk_key;      /* local device CSRK = d1(ER,DIV,1)*/
+}tBTA_LE_KEY_VALUE;
+
+#define BTA_BLE_LOCAL_KEY_TYPE_ID         1
+#define BTA_BLE_LOCAL_KEY_TYPE_ER         2
+typedef UINT8 tBTA_DM_BLE_LOCAL_KEY_MASK;
+
+typedef struct
+{
+    BT_OCTET16       ir;
+    BT_OCTET16       irk;
+    BT_OCTET16       dhk;
+}tBTA_BLE_LOCAL_ID_KEYS;
+
+#define BTA_DM_SEC_GRANTED              BTA_SUCCESS
+#define BTA_DM_SEC_PAIR_NOT_SPT         BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT
+#define BTA_DM_SEC_REP_ATTEMPTS         BTA_DM_AUTH_SMP_REPEATED_ATTEMPT
+typedef UINT8 tBTA_DM_BLE_SEC_GRANT;
+
+
+#define BTA_DM_BLE_ONN_NONE             BTM_BLE_CONN_NONE
+#define BTA_DM_BLE_CONN_AUTO            BTM_BLE_CONN_AUTO
+#define BTA_DM_BLE_CONN_SELECTIVE       BTM_BLE_CONN_SELECTIVE
+typedef UINT8 tBTA_DM_BLE_CONN_TYPE;
+
+typedef BOOLEAN (tBTA_DM_BLE_SEL_CBACK)(BD_ADDR random_bda, UINT8 *p_remote_name);
+
+/* Structure associated with BTA_DM_BLE_SEC_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    BD_NAME         bd_name;        /* peer device name */
+} tBTA_DM_BLE_SEC_REQ;
+
+typedef struct
+{
+    BD_ADDR                 bd_addr;        /* peer address */
+    tBTM_LE_KEY_TYPE        key_type;
+    tBTM_LE_KEY_VALUE       key_value;
+}tBTA_DM_BLE_KEY;
+
+/* Structure associated with BTA_DM_AUTH_CMPL_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    BD_NAME         bd_name;            /* Name of peer device. */
+    BOOLEAN         key_present;        /* Valid link key value in key element */
+    LINK_KEY        key;                /* Link key associated with peer device. */
+    UINT8           key_type;           /* The type of Link Key */
+    BOOLEAN         success;            /* TRUE of authentication succeeded, FALSE if failed. */
+    UINT8           fail_reason;        /* The HCI reason/error code for when success=FALSE */
+
+} tBTA_DM_AUTH_CMPL;
+
+
+/* Structure associated with BTA_DM_AUTHORIZE_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    BD_NAME         bd_name;            /* Name of peer device. */
+    tBTA_SERVICE_ID service;            /* Service ID to authorize. */
+// btla-specific ++
+    DEV_CLASS      dev_class;
+// btla-specific --
+} tBTA_DM_AUTHORIZE;
+
+/* Structure associated with BTA_DM_LINK_UP_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+} tBTA_DM_LINK_UP;
+
+/* Structure associated with BTA_DM_LINK_DOWN_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    UINT8           status;             /* connection open/closed */
+} tBTA_DM_LINK_DOWN;
+
+/* Structure associated with BTA_DM_ROLE_CHG_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    UINT8           new_role;           /* the new connection role */
+} tBTA_DM_ROLE_CHG;
+
+/* Structure associated with BTA_DM_SIG_STRENGTH_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;            /* BD address peer device. */
+    tBTA_SIG_STRENGTH_MASK mask;        /* mask for the values that are valid */
+    tBTA_DM_RSSI_VALUE  rssi_value;
+    tBTA_DM_LINK_QUALITY_VALUE link_quality_value;
+
+} tBTA_DM_SIG_STRENGTH;
+
+/* Structure associated with BTA_DM_BUSY_LEVEL_EVT */
+typedef struct
+{
+    UINT8           level;     /* when paging or inquiring, level is 10.
+                                    Otherwise, the number of ACL links */
+} tBTA_DM_BUSY_LEVEL;
+
+#define BTA_IO_CAP_OUT      BTM_IO_CAP_OUT      /* DisplayOnly */
+#define BTA_IO_CAP_IO       BTM_IO_CAP_IO       /* DisplayYesNo */
+#define BTA_IO_CAP_IN       BTM_IO_CAP_IN       /* KeyboardOnly */
+#define BTA_IO_CAP_NONE     BTM_IO_CAP_NONE     /* NoInputNoOutput */
+typedef tBTM_IO_CAP     tBTA_IO_CAP;
+
+#define BTA_AUTH_SP_NO    BTM_AUTH_SP_NO      /* 0 MITM Protection Not Required - Single Profile/non-bonding
+                                                Numeric comparison with automatic accept allowed */
+#define BTA_AUTH_SP_YES   BTM_AUTH_SP_YES     /* 1 MITM Protection Required - Single Profile/non-bonding
+                                                Use IO Capabilities to determine authentication procedure */
+#define BTA_AUTH_AP_NO    BTM_AUTH_AP_NO      /* 2 MITM Protection Not Required - All Profiles/dedicated bonding
+                                                Numeric comparison with automatic accept allowed */
+#define BTA_AUTH_AP_YES   BTM_AUTH_AP_YES     /* 3 MITM Protection Required - All Profiles/dedicated bonding
+                                                Use IO Capabilities to determine authentication procedure */
+#define BTA_AUTH_SPGB_NO  BTM_AUTH_SPGB_NO    /* 4 MITM Protection Not Required - Single Profiles/general bonding
+                                                Numeric comparison with automatic accept allowed */
+#define BTA_AUTH_SPGB_YES BTM_AUTH_SPGB_YES   /* 5 MITM Protection Required - Single Profiles/general bonding
+                                                Use IO Capabilities to determine authentication procedure */
+typedef tBTM_AUTH_REQ   tBTA_AUTH_REQ;
+
+#define BTA_AUTH_DD_BOND    BTM_AUTH_DD_BOND  /* 2 this bit is set for dedicated bonding */
+#define BTA_AUTH_GEN_BOND   BTM_AUTH_SPGB_NO  /* 4 this bit is set for general bonding */
+#define BTA_AUTH_BONDS      BTM_AUTH_BONDS    /* 6 the general/dedicated bonding bits  */
+
+#define BTA_LE_AUTH_NO_BOND    BTM_LE_AUTH_REQ_NO_BOND  /* 0*/
+#define BTA_LE_AUTH_BOND       BTM_LE_AUTH_REQ_BOND     /* 1 << 0 */
+#define BTA_LE_AUTH_REQ_MITM   BTM_LE_AUTH_REQ_MITM    /* 1 << 2 */
+typedef tBTM_LE_AUTH_REQ       tBTA_LE_AUTH_REQ;       /* combination of the above bit pattern */
+
+#define BTA_OOB_NONE        BTM_OOB_NONE
+#define BTA_OOB_PRESENT     BTM_OOB_PRESENT
+#if BTM_OOB_INCLUDED == TRUE
+#define BTA_OOB_UNKNOWN     BTM_OOB_UNKNOWN
+#endif
+typedef tBTM_OOB_DATA   tBTA_OOB_DATA;
+
+/* Structure associated with BTA_DM_SP_CFM_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    BD_NAME         bd_name;        /* peer device name */
+    UINT32          num_val;        /* the numeric value for comparison. If just_works, do not show this number to UI */
+    BOOLEAN         just_works;     /* TRUE, if "Just Works" association model */
+    tBTA_AUTH_REQ   loc_auth_req;   /* Authentication required for local device */
+    tBTA_AUTH_REQ   rmt_auth_req;   /* Authentication required for peer device */
+    tBTA_IO_CAP     loc_io_caps;    /* IO Capabilities of local device */
+    tBTA_AUTH_REQ   rmt_io_caps;    /* IO Capabilities of remote device */
+} tBTA_DM_SP_CFM_REQ;
+
+enum
+{
+    BTA_SP_KEY_STARTED,         /* passkey entry started */
+    BTA_SP_KEY_ENTERED,         /* passkey digit entered */
+    BTA_SP_KEY_ERASED,          /* passkey digit erased */
+    BTA_SP_KEY_CLEARED,         /* passkey cleared */
+    BTA_SP_KEY_COMPLT           /* passkey entry completed */
+};
+typedef UINT8   tBTA_SP_KEY_TYPE;
+
+/* Structure associated with BTA_DM_SP_KEYPRESS_EVT */
+typedef struct
+{
+    BD_ADDR             bd_addr;        /* peer address */
+    tBTA_SP_KEY_TYPE   notif_type;
+}tBTA_DM_SP_KEY_PRESS;
+
+/* Structure associated with BTA_DM_SP_KEY_NOTIF_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    BD_NAME         bd_name;        /* peer device name */
+    UINT32          passkey;        /* the numeric value for comparison. If just_works, do not show this number to UI */
+} tBTA_DM_SP_KEY_NOTIF;
+
+/* Structure associated with BTA_DM_SP_RMT_OOB_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    BD_NAME         bd_name;        /* peer device name */
+} tBTA_DM_SP_RMT_OOB;
+
+/* Structure associated with BTA_DM_BOND_CANCEL_CMPL_EVT */
+typedef struct
+{
+    tBTA_STATUS     result;    /* TRUE of bond cancel succeeded, FALSE if failed. */
+} tBTA_DM_BOND_CANCEL_CMPL;
+
+/* Union of all security callback structures */
+typedef union
+{
+    tBTA_DM_ENABLE      enable;         /* BTA enabled */
+    tBTA_DM_PIN_REQ     pin_req;        /* PIN request. */
+    tBTA_DM_AUTH_CMPL   auth_cmpl;      /* Authentication complete indication. */
+    tBTA_DM_AUTHORIZE   authorize;      /* Authorization request. */
+    tBTA_DM_LINK_UP     link_up;       /* ACL connection down event */
+    tBTA_DM_LINK_DOWN   link_down;       /* ACL connection down event */
+    tBTA_DM_SIG_STRENGTH sig_strength;  /* rssi and link quality value */
+    tBTA_DM_BUSY_LEVEL  busy_level;     /* System busy level */
+    tBTA_DM_SP_CFM_REQ  cfm_req;        /* user confirm request */
+    tBTA_DM_SP_KEY_NOTIF key_notif;     /* passkey notification */
+    tBTA_DM_SP_RMT_OOB  rmt_oob;        /* remote oob */
+    tBTA_DM_BOND_CANCEL_CMPL bond_cancel_cmpl; /* Bond Cancel Complete indication */
+    tBTA_DM_SP_KEY_PRESS   key_press;   /* key press notification event */
+    tBTA_DM_ROLE_CHG     role_chg;       /* role change event */
+    tBTA_DM_BLE_SEC_REQ  ble_req;        /* BLE SMP related request */
+    tBTA_DM_BLE_KEY      ble_key;        /* BLE SMP keys used when pairing */
+    tBTA_BLE_LOCAL_ID_KEYS  ble_id_keys;  /* IR event */
+    BT_OCTET16              ble_er;       /* ER event data */
+} tBTA_DM_SEC;
+
+/* Security callback */
+typedef void (tBTA_DM_SEC_CBACK)(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data);
+
+/* Vendor Specific Command Callback */
+typedef tBTM_VSC_CMPL_CB        tBTA_VENDOR_CMPL_CBACK;
+
+/* Search callback events */
+#define BTA_DM_INQ_RES_EVT              0       /* Inquiry result for a peer device. */
+#define BTA_DM_INQ_CMPL_EVT             1       /* Inquiry complete. */
+#define BTA_DM_DISC_RES_EVT             2       /* Discovery result for a peer device. */
+#define BTA_DM_DISC_BLE_RES_EVT         3       /* Discovery result for BLE GATT based servoce on a peer device. */
+#define BTA_DM_DISC_CMPL_EVT            4       /* Discovery complete. */
+#define BTA_DM_DI_DISC_CMPL_EVT         5       /* Discovery complete. */
+#define BTA_DM_SEARCH_CANCEL_CMPL_EVT   6       /* Search cancelled */
+
+typedef UINT8 tBTA_DM_SEARCH_EVT;
+
+#define BTA_DM_INQ_RES_IGNORE_RSSI      BTM_INQ_RES_IGNORE_RSSI /* 0x7f RSSI value not supplied (ignore it) */
+
+/* Structure associated with BTA_DM_INQ_RES_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;                /* BD address peer device. */
+    DEV_CLASS       dev_class;              /* Device class of peer device. */
+    BOOLEAN         remt_name_not_required; /* Application sets this flag if it already knows the name of the device */
+                                            /* If the device name is known to application BTA skips the remote name request */
+    BOOLEAN         is_limited;             /* TRUE, if the limited inquiry bit is set in the CoD */
+    INT8            rssi;                   /* The rssi value */
+    UINT8           *p_eir;                 /* received EIR */
+#if (BLE_INCLUDED == TRUE)
+    UINT8               inq_result_type;
+    UINT8               ble_addr_type;
+    tBTM_BLE_EVT_TYPE   ble_evt_type;
+    tBT_DEVICE_TYPE     device_type;
+#endif
+
+} tBTA_DM_INQ_RES;
+
+/* Structure associated with BTA_DM_INQ_CMPL_EVT */
+typedef struct
+{
+    UINT8           num_resps;          /* Number of inquiry responses. */
+} tBTA_DM_INQ_CMPL;
+
+/* Structure associated with BTA_DM_DI_DISC_CMPL_EVT */
+typedef struct
+{
+    BD_ADDR             bd_addr;        /* BD address peer device. */
+    UINT8               num_record;     /* Number of DI record */
+    tBTA_STATUS         result;
+} tBTA_DM_DI_DISC_CMPL;
+
+/* Structure associated with BTA_DM_DISC_RES_EVT */
+typedef struct
+{
+    BD_ADDR             bd_addr;        /* BD address peer device. */
+    BD_NAME             bd_name;        /* Name of peer device. */
+    tBTA_SERVICE_MASK   services;       /* Services found on peer device. */
+// btla-specific ++
+    UINT8           *   p_raw_data;     /* Raw data for discovery DB */
+    UINT32              raw_data_size;  /* size of raw data */
+    tBT_DEVICE_TYPE     device_type;    /* device type in case it is BLE device */
+    UINT32              num_uuids;
+    UINT8               *p_uuid_list;
+// btla-specific --
+    tBTA_STATUS         result;
+} tBTA_DM_DISC_RES;
+
+/* Structure associated with tBTA_DM_DISC_BLE_RES */
+typedef struct
+{
+    BD_ADDR             bd_addr;        /* BD address peer device. */
+    BD_NAME             bd_name;        /* Name of peer device. */
+    tBT_UUID            service;        /* GATT based Services UUID found on peer device. */
+} tBTA_DM_DISC_BLE_RES;
+
+
+/* Union of all search callback structures */
+typedef union
+{
+    tBTA_DM_INQ_RES     inq_res;        /* Inquiry result for a peer device. */
+    tBTA_DM_INQ_CMPL    inq_cmpl;       /* Inquiry complete. */
+    tBTA_DM_DISC_RES    disc_res;       /* Discovery result for a peer device. */
+    tBTA_DM_DISC_BLE_RES    disc_ble_res;   /* discovery result for GATT based service */
+    tBTA_DM_DI_DISC_CMPL    di_disc;        /* DI discovery result for a peer device */
+
+} tBTA_DM_SEARCH;
+
+/* Search callback */
+typedef void (tBTA_DM_SEARCH_CBACK)(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data);
+
+/* Execute call back */
+typedef void (tBTA_DM_EXEC_CBACK) (void * p_param);
+
+/* Encryption callback*/
+typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_STATUS result);
+
+#if BLE_INCLUDED == TRUE
+#define BTA_DM_BLE_SEC_NONE         BTM_BLE_SEC_NONE
+#define BTA_DM_BLE_SEC_ENCRYPT      BTM_BLE_SEC_ENCRYPT
+#define BTA_DM_BLE_SEC_NO_MITM      BTM_BLE_SEC_ENCRYPT_NO_MITM
+#define BTA_DM_BLE_SEC_MITM         BTM_BLE_SEC_ENCRYPT_MITM
+typedef tBTM_BLE_SEC_ACT            tBTA_DM_BLE_SEC_ACT;
+#else
+typedef UINT8                       tBTA_DM_BLE_SEC_ACT;
+#endif
+
+/* Maximum service name length */
+#define BTA_SERVICE_NAME_LEN    35
+#define BTA_SERVICE_DESP_LEN    BTA_SERVICE_NAME_LEN
+#define BTA_PROVIDER_NAME_LEN   BTA_SERVICE_NAME_LEN
+
+
+/* link policy masks  */
+#define BTA_DM_LP_SWITCH        HCI_ENABLE_MASTER_SLAVE_SWITCH
+#define BTA_DM_LP_HOLD          HCI_ENABLE_HOLD_MODE
+#define BTA_DM_LP_SNIFF         HCI_ENABLE_SNIFF_MODE
+#define BTA_DM_LP_PARK          HCI_ENABLE_PARK_MODE
+typedef UINT16 tBTA_DM_LP_MASK;
+
+/* power mode actions  */
+#define BTA_DM_PM_NO_ACTION    0x00       /* no change to the current pm setting */
+#define BTA_DM_PM_PARK         0x10       /* prefers park mode */
+#define BTA_DM_PM_SNIFF        0x20       /* prefers sniff mode */
+#define BTA_DM_PM_SNIFF1       0x21       /* prefers sniff1 mode */
+#define BTA_DM_PM_SNIFF2       0x22       /* prefers sniff2 mode */
+#define BTA_DM_PM_SNIFF3       0x23       /* prefers sniff3 mode */
+#define BTA_DM_PM_SNIFF4       0x24       /* prefers sniff4 mode */
+#define BTA_DM_PM_SNIFF5       0x25       /* prefers sniff5 mode */
+#define BTA_DM_PM_SNIFF6       0x26       /* prefers sniff6 mode */
+#define BTA_DM_PM_SNIFF7       0x27       /* prefers sniff7 mode */
+#define BTA_DM_PM_SNIFF_USER0  0x28       /* prefers user-defined sniff0 mode (testtool only) */
+#define BTA_DM_PM_SNIFF_USER1  0x29       /* prefers user-defined sniff1 mode (testtool only) */
+#define BTA_DM_PM_ACTIVE       0x40       /* prefers active mode */
+#define BTA_DM_PM_RETRY        0x80       /* retry power mode based on current settings */
+#define BTA_DM_PM_NO_PREF      0x01       /* service has no prefernce on power mode setting. eg. connection to service got closed */
+
+typedef UINT8 tBTA_DM_PM_ACTTION;
+
+/* index to bta_dm_ssr_spec */
+#define BTA_DM_PM_SSR0          0
+#define BTA_DM_PM_SSR1          1
+#define BTA_DM_PM_SSR2          2
+#define BTA_DM_PM_SSR3          3
+#define BTA_DM_PM_SSR4          4
+#define BTA_DM_PM_SSR5          5
+#define BTA_DM_PM_SSR6          6
+
+#define BTA_DM_PM_NUM_EVTS      9
+
+#ifndef BTA_DM_PM_PARK_IDX
+#define BTA_DM_PM_PARK_IDX      5 /* the actual index to bta_dm_pm_md[] for PARK mode */
+#endif
+
+#define BTA_DM_SW_BB_TO_MM      BTM_SW_BB_TO_MM
+#define BTA_DM_SW_MM_TO_BB      BTM_SW_MM_TO_BB
+#define BTA_DM_SW_BB_TO_BTC     BTM_SW_BB_TO_BTC
+#define BTA_DM_SW_BTC_TO_BB     BTM_SW_BTC_TO_BB
+
+typedef tBTM_SW_DIR tBTA_DM_SW_DIR;
+
+/* Switch callback events */
+#define BTA_DM_SWITCH_CMPL_EVT      0       /* Completion of the Switch API */
+
+typedef UINT8 tBTA_DM_SWITCH_EVT;
+typedef void (tBTA_DM_SWITCH_CBACK)(tBTA_DM_SWITCH_EVT event, tBTA_STATUS status);
+
+/* Audio routing out configuration */
+#define BTA_DM_ROUTE_NONE       0x00    /* No Audio output */
+#define BTA_DM_ROUTE_DAC        0x01    /* routing over analog output */
+#define BTA_DM_ROUTE_I2S        0x02    /* routing over digital (I2S) output */
+#define BTA_DM_ROUTE_BT_MONO    0x04    /* routing over SCO */
+#define BTA_DM_ROUTE_BT_STEREO  0x08    /* routing over BT Stereo */
+#define BTA_DM_ROUTE_HOST       0x10    /* routing over Host */
+#define BTA_DM_ROUTE_FMTX       0x20    /* routing over FMTX */
+#define BTA_DM_ROUTE_FMRX       0x40    /* routing over FMRX */
+#define BTA_DM_ROUTE_BTSNK      0x80    /* routing over BT SNK */
+
+typedef UINT8 tBTA_DM_ROUTE_PATH;
+
+
+/* Device Identification (DI) data structure
+*/
+/* Used to set the DI record */
+typedef tSDP_DI_RECORD          tBTA_DI_RECORD;
+/* Used to get the DI record */
+typedef tSDP_DI_GET_RECORD      tBTA_DI_GET_RECORD;
+/* SDP discovery database */
+typedef tSDP_DISCOVERY_DB       tBTA_DISCOVERY_DB;
+
+#ifndef         BTA_DI_NUM_MAX
+#define         BTA_DI_NUM_MAX       3
+#endif
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         BTA_EnableBluetooth
+**
+** Description      This function initializes BTA and prepares BTA and the
+**                  Bluetooth protocol stack for use.  This function is
+**                  typically called at startup or when Bluetooth services
+**                  are required by the phone.  This function must be called
+**                  before calling any other API function.
+**
+**
+** Returns          BTA_SUCCESS if successful.
+**                  BTA_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_DisableBluetooth
+**
+** Description      This function disables BTA and the Bluetooth protocol
+**                  stack.  It is called when BTA is no longer being used
+**                  by any application in the system.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DisableBluetooth(void);
+
+/*******************************************************************************
+**
+** Function         BTA_EnableTestMode
+**
+** Description      Enables bluetooth device under test mode
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_EnableTestMode(void);
+
+/*******************************************************************************
+**
+** Function         BTA_DisableTestMode
+**
+** Description      Disable bluetooth device under test mode
+**
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_DisableTestMode(void);
+
+/*******************************************************************************
+**
+** Function         BTA_DmIsDeviceUp
+**
+** Description      This function tests whether the Bluetooth module is up
+**                  and ready.  This is a direct execution function that
+**                  may lock task scheduling on some platforms.
+**
+**
+** Returns          TRUE if the module is ready.
+**                  FALSE if the module is not ready.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_DmIsDeviceUp(void);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetDeviceName
+**
+** Description      This function sets the Bluetooth name of the local device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetDeviceName(char *p_name);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetVisibility
+**
+** Description      This function sets the Bluetooth connectable,discoverable,
+**                  pairable and conn paired only modesmodes of the local device.
+**                  This controls whether other Bluetooth devices can find and connect to
+**                  the local device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN conn_mode, UINT8 pairable_mode, UINT8 conn_filter);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetScanParam
+**
+** Description      This function sets the parameters for page scan and
+**                  inquiry scan.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_scan_window,
+                                  UINT16 inquiry_scan_interval, UINT16 inquiry_scan_window);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetAfhChannels
+**
+** Description      This function sets the AFH first and
+**                  last disable channel, so channels within
+**                  that range are disabled.
+**                  In order to use this API, BTM_BYPASS_AMP_AUTO_AFH must be set
+**                  to be TRUE
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetAfhChannels(UINT8 first, UINT8 last);
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmVendorSpecificCommand
+**
+** Description      This function sends the vendor specific command
+**                  to the controller
+**
+**
+** Returns          tBTA_STATUS
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 param_len,UINT8 *p_param_buf, tBTA_VENDOR_CMPL_CBACK *p_cback);
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmSearch
+**
+** Description      This function searches for peer Bluetooth devices.  It
+**                  first performs an inquiry; for each device found from the
+**                  inquiry it gets the remote name of the device.  If
+**                  parameter services is nonzero, service discovery will be
+**                  performed on each device for the services specified.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK services,
+                                 tBTA_DM_SEARCH_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSearchCancel
+**
+** Description      This function cancels a search that has been initiated
+**                  by calling BTA_DmSearch().
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSearchCancel(void);
+
+/*******************************************************************************
+**
+** Function         BTA_DmDiscover
+**
+** Description      This function performs service discovery for the services
+**                  of a particular peer device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services,
+                                   tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
+
+// btla-specific ++
+/*******************************************************************************
+**
+** Function         BTA_DmDiscoverUUID
+**
+** Description      This function performs service discovery for the services
+**                  of a particular peer device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid,
+                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
+
+/*******************************************************************************
+**
+** Function         BTA_DmGetCachedRemoteName
+**
+** Description      Retieve cached remote name if available
+**
+** Returns          BTA_SUCCESS if cached name was retrieved
+**                  BTA_FAILURE if cached name is not available
+**
+*******************************************************************************/
+tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name);
+// btla-specific --
+
+/*******************************************************************************
+**
+** Function         BTA_DmIsMaster
+**
+** Description      This function checks if the local device is the master of
+**                  the link to the given device
+**
+** Returns          TRUE if master.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_DmIsMaster(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_DmBond
+**
+** Description      This function initiates a bonding procedure with a peer
+**                  device.  The bonding procedure enables authentication
+**                  and optionally encryption on the Bluetooth link.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmBond(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_DmBondCancel
+**
+** Description      This function cancels a bonding procedure with a peer
+**                  device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmBondCancel(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_DmPinReply
+**
+** Description      This function provides a PIN when one is requested by DM
+**                  during a bonding procedure.  The application should call
+**                  this function after the security callback is called with
+**                  a BTA_DM_PIN_REQ_EVT.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmPinReply(BD_ADDR bd_addr, BOOLEAN accept, UINT8 pin_len,
+                                   UINT8 *p_pin);
+
+/*******************************************************************************
+**
+** Function         BTA_DmLinkPolicy
+**
+** Description      This function sets/clears the link policy mask to the given
+**                  bd_addr.
+**                  If clearing the sniff or park mode mask, the link is put
+**                  in active mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmLinkPolicy(BD_ADDR bd_addr, tBTA_DM_LP_MASK policy_mask,
+                                     BOOLEAN set);
+
+#if (BTM_OOB_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         BTA_DmLocalOob
+**
+** Description      This function retrieves the OOB data from local controller.
+**                  The result is reported by bta_dm_co_loc_oob().
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmLocalOob(void);
+#endif /* BTM_OOB_INCLUDED */
+
+/*******************************************************************************
+**
+** Function         BTA_DmConfirm
+**
+** Description      This function accepts or rejects the numerical value of the
+**                  Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept);
+
+/*******************************************************************************
+**
+** Function         BTA_DmPasskeyCancel
+**
+** Description      This function is called to cancel the simple pairing process
+**                  reported by BTA_DM_SP_KEY_NOTIF_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmPasskeyCancel(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddDevice
+**
+** Description      This function adds a device to the security database list
+**                  of peer devices. This function would typically be called
+**                  at system startup to initialize the security database with
+**                  known peer devices.  This is a direct execution function
+**                  that may lock task scheduling on some platforms.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                    LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask,
+                                    BOOLEAN is_trusted, UINT8 key_type,
+                                    tBTA_IO_CAP io_cap);
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddDevWithName
+**
+** Description      This function is newer version of  BTA_DmAddDevice()
+**                  which added bd_name and features as input parameters.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                      BD_NAME bd_name, BD_FEATURES features,
+                                      LINK_KEY link_key, tBTA_SERVICE_MASK trusted_mask,
+                                      BOOLEAN is_trusted, UINT8 key_type, tBTA_IO_CAP io_cap);
+
+/*******************************************************************************
+**
+** Function         BTA_DmRemoveDevice
+**
+** Description      This function removes a device from the security database.
+**                  This is a direct execution function that may lock task
+**                  scheduling on some platforms.
+**
+**
+** Returns          BTA_SUCCESS if successful.
+**                  BTA_FAIL if operation failed.
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_DmAuthorizeReply
+**
+** Description      This function provides an authorization reply when
+**                  authorization is requested by BTA.  The application calls
+**                  this function after the security callback is called with
+**                  a BTA_DM_AUTHORIZE_EVT.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmAuthorizeReply(BD_ADDR bd_addr, tBTA_SERVICE_ID service,
+                                         tBTA_AUTH_RESP response);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSignalStrength
+**
+** Description      This function initiates RSSI and channnel quality
+**                  measurments. BTA_DM_SIG_STRENGTH_EVT is sent to
+**                  application with the values of RSSI and channel
+**                  quality
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSignalStrength(tBTA_SIG_STRENGTH_MASK mask, UINT16 period, BOOLEAN start);
+
+/*******************************************************************************
+**
+** Function         BTA_DmWriteInqTxPower
+**
+** Description      This command is used to write the inquiry transmit power level
+**                  used to transmit the inquiry (ID) data packets.
+**
+** Parameters       tx_power - tx inquiry power to use, valid value is -70 ~ 20
+
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmWriteInqTxPower(INT8 tx_power);
+
+/*******************************************************************************
+**
+** Function         BTA_DmEirAddUUID
+**
+** Description      This function is called to add UUID into EIR.
+**
+** Parameters       tBT_UUID - UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmEirAddUUID (tBT_UUID *p_uuid);
+
+/*******************************************************************************
+**
+** Function         BTA_DmEirRemoveUUID
+**
+** Description      This function is called to remove UUID from EIR.
+**
+** Parameters       tBT_UUID - UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetEIRConfig
+**
+** Description      This function is called to override the BTA default EIR parameters.
+**                  This funciton is only valid in a system where BTU & App task
+**                  are in the same memory space.
+**
+** Parameters       Pointer to User defined EIR config
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg);
+
+/*******************************************************************************
+**
+** Function         BTA_CheckEirData
+**
+** Description      This function is called to get EIR data from significant part.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  type   - finding EIR data type
+**                  p_length - return the length of EIR data
+**
+** Returns          pointer of EIR data
+**
+*******************************************************************************/
+BTA_API extern UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 tag, UINT8 *p_length );
+
+/*******************************************************************************
+**
+** Function         BTA_GetEirService
+**
+** Description      This function is called to get BTA service mask from EIR.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  p_services - return the BTA service mask
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services );
+
+/*******************************************************************************
+**
+** Function         BTA_DmUseSsr
+**
+** Description      This function is called to check if the connected peer device
+**                  supports SSR or not.
+**
+** Returns          TRUE, if SSR is supported
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_DmUseSsr( BD_ADDR bd_addr );
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+** Returns          BTA_SUCCESS if record set sucessfully, otherwise error code.
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info,
+	                          UINT32 *p_handle );
+
+/*******************************************************************************
+**
+** Function         BTA_DmGetLocalDiRecord
+**
+** Description      Get a specified DI record to the local SDP database. If no
+**                  record handle is provided, the primary DI record will be
+**                  returned.
+**
+** Returns          BTA_SUCCESS if record set sucessfully, otherwise error code.
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info,
+	                          UINT32 *p_handle );
+
+/*******************************************************************************
+**
+** Function         BTA_DmDiDiscover
+**
+** Description      This function queries a remote device for DI information.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmDiDiscover( BD_ADDR remote_device, tBTA_DISCOVERY_DB *p_db,
+                       UINT32 len, tBTA_DM_SEARCH_CBACK *p_cback );
+
+/*******************************************************************************
+**
+** Function         BTA_DmGetDiRecord
+**
+** Description      This function retrieves a remote device's DI record from
+**                  the specified database.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BTA_API extern tBTA_STATUS BTA_DmGetDiRecord( UINT8 get_record_index, tBTA_DI_GET_RECORD *p_device_info,
+                        tBTA_DISCOVERY_DB *p_db );
+
+/*******************************************************************************
+**
+** Function         BTA_SysFeatures
+**
+** Description      This function is called to set system features.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_SysFeatures (UINT16 sys_features);
+
+/*******************************************************************************
+**
+** Function         bta_dmexecutecallback
+**
+** Description      This function will request BTA to execute a call back in the context of BTU task
+**                  This API was named in lower case because it is only intended
+**                  for the internal customers(like BTIF).
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param);
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         BTA_DmPcmInitSamples
+**
+** Description      initialize the down sample converter.
+**
+**                  src_sps: original samples per second (source audio data)
+**                            (ex. 44100, 48000)
+**                  bits: number of bits per pcm sample (16)
+**                  n_channels: number of channels (i.e. mono(1), stereo(2)...)
+**
+** Returns          none
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_channels);
+
+/**************************************************************************************
+** Function         BTA_DmPcmResample
+**
+** Description      Down sampling utility to convert higher sampling rate into 8K/16bits
+**                  PCM samples.
+**
+** Parameters       p_src: pointer to the buffer where the original sampling PCM
+**                              are stored.
+**                  in_bytes:  Length of the input PCM sample buffer in byte.
+**                  p_dst:      pointer to the buffer which is to be used to store
+**                              the converted PCM samples.
+**
+**
+** Returns          INT32: number of samples converted.
+**
+**************************************************************************************/
+BTA_API extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst);
+#endif
+
+#if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE))
+/* BLE related API functions */
+/*******************************************************************************
+**
+** Function         BTA_DmBleSecurityGrant
+**
+** Description      Grant security request access.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  res              - security grant status.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRANT res);
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmBleSetBgConnType
+**
+** Description      This function is called to set BLE connectable mode for a
+**                  peripheral device.
+**
+** Parameters       bg_conn_type: it can be auto connection, or selective connection.
+**                  p_select_cback: callback function when selective connection procedure
+**                              is being used.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, tBTA_DM_BLE_SEL_CBACK *p_select_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_DmBlePasskeyReply
+**
+** Description      Send BLE SMP passkey reply.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  accept           - passkey entry sucessful or declined.
+**                  passkey          - passkey value, must be a 6 digit number,
+**                                     can be lead by 0.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT32 passkey);
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddBleDevice
+**
+** Description      Add a BLE device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  for a LE device stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  dev_type         - Remote device's device type.
+**                  addr_type        - LE device address type.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type,
+                                       tBT_DEVICE_TYPE dev_type);
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmAddBleKey
+**
+** Description      Add/modify LE device information.  This function will be
+**                  normally called during host startup to restore all required
+**                  information stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  p_le_key         - LE key values.
+**                  key_type         - LE SMP key type.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key,
+                                     tBTA_LE_KEY_TYPE key_type);
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetBlePrefConnParams
+**
+** Description      This function is called to set the preferred connection
+**                  parameters when default connection parameter is not desired.
+**
+** Parameters:      bd_addr          - BD address of the peripheral
+**                  min_conn_int     - minimum preferred connection interval
+**                  max_conn_int     - maximum preferred connection interval
+**                  slave_latency    - preferred slave latency
+**                  supervision_tout - preferred supervision timeout
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr,
+                               UINT16 min_conn_int, UINT16 max_conn_int,
+                               UINT16 slave_latency, UINT16 supervision_tout );
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetBleConnScanParams
+**
+** Description      This function is called to set scan parameters used in
+**                  BLE connection request
+**
+** Parameters:      bd_addr          - BD address of the peripheral
+**                  scan_interval    - scan interval
+**                  scan_window      - scan window
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetBleConnScanParams(UINT16 scan_interval,
+                                               UINT16 scan_window );
+
+/*******************************************************************************
+**
+** Function         BTA_DmSearchExt
+**
+** Description      This function searches for peer Bluetooth devices. It performs
+**                  an inquiry and gets the remote name for devices. Service
+**                  discovery is done if services is non zero
+**
+** Parameters       p_dm_inq: inquiry conditions
+**                  services: if service is not empty, service discovery will be done.
+**                            for all GATT based service condition, put num_uuid, and
+**                            p_uuid is the pointer to the list of UUID values.
+**                  p_cback: callback functino when search is completed.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services,
+                                    tBTA_DM_SEARCH_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_DmDiscoverExt
+**
+** Description      This function does service discovery for services of a
+**                  peer device. When services.num_uuid is 0, it indicates all
+**                  GATT based services are to be searched; other wise a list of
+**                  UUID of interested services should be provided through
+**                  services.p_uuid.
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services,
+                                    tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search);
+
+
+/*******************************************************************************
+**
+** Function         BTA_DmSetEncryption
+**
+** Description      This function is called to ensure that connection is
+**                  encrypted.  Should be called only on an open connection.
+**                  Typically only needed for connections that first want to
+**                  bring up unencrypted links, then later encrypt them.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  p_callback    - Pointer to callback function to indicat the
+**                                  link encryption status
+**                  sec_act       - This is the security action to indicate
+**                                  what knid of BLE security level is required for
+**                                  the BLE link if the BLE is supported
+**                                  Note: This parameter is ignored for the BR/EDR link
+**                                        or the BLE is not supported
+**
+** Returns          void
+**
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetEncryption(BD_ADDR bd_addr, tBTA_DM_ENCRYPT_CBACK *p_callback,
+                            tBTA_DM_BLE_SEC_ACT sec_act);
+
+#endif
+
+// btla-specific ++
+/*******************************************************************************
+**
+** Function         BTA_DmSetAfhChannelAssessment
+**
+** Description      This function is called to set the channel assessment mode on or off
+**
+** Returns          status
+**
+*******************************************************************************/
+BTA_API extern void BTA_DmSetAfhChannelAssessment (BOOLEAN enable_or_disable);
+// btla-specific --
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_API_H */
+
diff --git a/bta/include/bta_ar_api.h b/bta/include/bta_ar_api.h
new file mode 100644
index 0000000..b451cb4
--- /dev/null
+++ b/bta/include/bta_ar_api.h
@@ -0,0 +1,140 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the simulatenous advanced
+ *  audio/video streaming (AV) source and sink of BTA, Broadcom's Bluetooth
+ *  application layer for mobile phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_AR_API_H
+#define BTA_AR_API_H
+
+#include "avdt_api.h"
+#include "avct_api.h"
+#include "avrc_api.h"
+#include "sdp_api.h"
+#include "bta_av_api.h"
+#include "bta_sys.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/* This event signal to AR user that other profile is connected */
+#define BTA_AR_AVDT_CONN_EVT    (AVDT_MAX_EVT + 1)
+
+/*******************************************************************************
+**
+** Function         bta_ar_init
+**
+** Description      This function is called from bta_sys_init().
+**                  to initialize the control block
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_init(void);
+
+/*******************************************************************************
+**
+** Function         bta_ar_reg_avdt
+**
+** Description      This function is called to register to AVDTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_reg_avdt(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback, tBTA_SYS_ID sys_id);
+
+/*******************************************************************************
+**
+** Function         bta_ar_dereg_avdt
+**
+** Description      This function is called to de-register from AVDTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_dereg_avdt(tBTA_SYS_ID sys_id);
+
+/*******************************************************************************
+**
+** Function         bta_ar_avdt_conn
+**
+** Description      This function is called to let ar know that some AVDTP profile
+**                  is connected for this sys_id.
+**                  If the other sys modules started a timer for PENDING_EVT,
+**                  the timer can be stopped now.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_avdt_conn(tBTA_SYS_ID sys_id, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         bta_ar_reg_avct
+**
+** Description      This function is called to register to AVCTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_reg_avct(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask, tBTA_SYS_ID sys_id);
+
+/*******************************************************************************
+**
+** Function         bta_ar_dereg_avct
+**
+** Description      This function is called to deregister from AVCTP.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_ar_dereg_avct(tBTA_SYS_ID sys_id);
+
+/******************************************************************************
+**
+** Function         bta_ar_reg_avrc
+**
+** Description      This function is called to register an SDP record for AVRCP.
+**
+** Returns          void
+**
+******************************************************************************/
+extern void bta_ar_reg_avrc(UINT16 service_uuid, char *p_service_name,
+							 char *p_provider_name, UINT16 categories, tBTA_SYS_ID sys_id);
+
+/******************************************************************************
+**
+** Function         bta_ar_dereg_avrc
+**
+** Description      This function is called to de-register/delete an SDP record for AVRCP.
+**
+** Returns          void
+**
+******************************************************************************/
+extern void bta_ar_dereg_avrc(UINT16 service_uuid, tBTA_SYS_ID sys_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_AR_API_H */
diff --git a/bta/include/bta_av_api.h b/bta/include/bta_av_api.h
new file mode 100644
index 0000000..eb77279
--- /dev/null
+++ b/bta/include/bta_av_api.h
@@ -0,0 +1,765 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the advanced audio/video streaming
+ *  (AV) subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_AV_API_H
+#define BTA_AV_API_H
+
+#include "avrc_api.h"
+#include "avdt_api.h"
+#include "a2d_api.h"
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/* Set to TRUE if seperate authorization prompt desired for AVCTP besides A2DP authorization */
+/* Typically FALSE when AVRCP is used in conjunction with A2DP */
+#ifndef BTA_AV_WITH_AVCTP_AUTHORIZATION
+#define BTA_AV_WITH_AVCTP_AUTHORIZATION     FALSE
+#endif
+
+/* AV status values */
+#define BTA_AV_SUCCESS          0       /* successful operation */
+#define BTA_AV_FAIL             1       /* generic failure */
+#define BTA_AV_FAIL_SDP         2       /* service not found */
+#define BTA_AV_FAIL_STREAM      3       /* stream connection failed */
+#define BTA_AV_FAIL_RESOURCES   4       /* no resources */
+#define BTA_AV_FAIL_ROLE        5       /* failed due to role management related issues */
+
+typedef UINT8 tBTA_AV_STATUS;
+
+/* AV features masks */
+#define BTA_AV_FEAT_RCTG        0x0001  /* remote control target */
+#define BTA_AV_FEAT_RCCT        0x0002  /* remote control controller */
+#define BTA_AV_FEAT_PROTECT     0x0004  /* streaming media contect protection */
+#define BTA_AV_FEAT_VENDOR      0x0008  /* remote control vendor dependent commands */
+#define BTA_AV_FEAT_REPORT      0x0020  /* use reporting service for VDP */
+#define BTA_AV_FEAT_METADATA    0x0040  /* remote control Metadata Transfer command/response */
+#define BTA_AV_FEAT_MULTI_AV    0x0080  /* use multi-av, if controller supports it */
+#define BTA_AV_FEAT_BROWSE      0x0010  /* use browsing channel */
+#define BTA_AV_FEAT_MASTER      0x0100  /* stream only as master role */
+#define BTA_AV_FEAT_ADV_CTRL    0x0200  /* remote control Advanced Control command/response */
+#define BTA_AV_FEAT_DELAY_RPT   0x0400  /* allow delay reporting */
+#define BTA_AV_FEAT_ACP_START   0x0800  /* start stream when 2nd SNK was accepted   */
+
+/* Internal features */
+#define BTA_AV_FEAT_NO_SCO_SSPD 0x8000  /* Do not suspend av streaming as to AG events(SCO or Call) */
+
+typedef UINT16 tBTA_AV_FEAT;
+
+/* AV channel values */
+#define BTA_AV_CHNL_MSK             0xC0
+#define BTA_AV_CHNL_AUDIO           0x40  /* audio channel */
+#define BTA_AV_CHNL_VIDEO           0x80  /* video channel */
+typedef UINT8 tBTA_AV_CHNL;
+
+
+#define BTA_AV_HNDL_MSK             0x3F
+typedef UINT8 tBTA_AV_HNDL;
+/* handle index to mask */
+#define BTA_AV_HNDL_TO_MSK(h)       ((UINT8)(1 << (h)))
+
+/* tBTA_AV_HNDL to mask */
+#define BTA_AV_HNDL_TYPE_TO_MSK(h)  ((UINT8)(1 << (h&BTA_AV_HNDL_MSK)))
+
+/* offset of codec type in codec info byte array */
+#define BTA_AV_CODEC_TYPE_IDX       AVDT_CODEC_TYPE_INDEX   /* 2 */
+
+
+
+/* maximum number of streams created: 1 for audio, 1 for video */
+#ifndef BTA_AV_NUM_STRS
+#define BTA_AV_NUM_STRS         2
+#endif
+
+#ifndef BTA_AV_MAX_SEPS
+#define BTA_AV_MAX_SEPS         2
+#endif
+
+#ifndef BTA_AV_MAX_A2DP_MTU
+ /*#define BTA_AV_MAX_A2DP_MTU     668 //224 (DM5) * 3 - 4(L2CAP header) */
+#define BTA_AV_MAX_A2DP_MTU     1008
+#endif
+
+#ifndef BTA_AV_MAX_VDP_MTU
+#define BTA_AV_MAX_VDP_MTU      1008
+#endif
+
+
+/* codec type */
+#define BTA_AV_CODEC_SBC        A2D_MEDIA_CT_SBC        /* SBC media codec type */
+#define BTA_AV_CODEC_M12        A2D_MEDIA_CT_M12        /* MPEG-1, 2 Audio media codec type */
+#define BTA_AV_CODEC_M24        A2D_MEDIA_CT_M24        /* MPEG-2, 4 AAC media codec type */
+#define BTA_AV_CODEC_ATRAC      A2D_MEDIA_CT_ATRAC      /* ATRAC family media codec type */
+#define BTA_AV_CODEC_H263_P0    VDP_MEDIA_CT_H263_P0    /* H.263 baseline (profile 0) */
+#define BTA_AV_CODEC_MPEG4      VDP_MEDIA_CT_MPEG4      /* MPEG-4 Visual Simple Profile */
+#define BTA_AV_CODEC_H263_P3    VDP_MEDIA_CT_H263_P3    /* H.263 profile 3 */
+#define BTA_AV_CODEC_H263_P8    VDP_MEDIA_CT_H263_P8    /* H.263 profile 8 */
+#define BTA_AV_CODEC_VEND       VDP_MEDIA_CT_VEND       /* Non-VDP */
+
+typedef UINT8 tBTA_AV_CODEC;
+
+/* Company ID in BT assigned numbers */
+#define BTA_AV_BT_VENDOR_ID     VDP_BT_VENDOR_ID        /* Broadcom Corporation */
+
+/* vendor specific codec ID */
+#define BTA_AV_CODEC_ID_H264    VDP_CODEC_ID_H264       /* Non-VDP codec ID - H.264 */
+#define BTA_AV_CODEC_ID_IMG     VDP_CODEC_ID_IMG        /* Non-VDP codec ID - images/slideshow */
+
+/* operation id list for BTA_AvRemoteCmd */
+#define BTA_AV_RC_SELECT        AVRC_ID_SELECT      /* select */
+#define BTA_AV_RC_UP            AVRC_ID_UP          /* up */
+#define BTA_AV_RC_DOWN          AVRC_ID_DOWN        /* down */
+#define BTA_AV_RC_LEFT          AVRC_ID_LEFT        /* left */
+#define BTA_AV_RC_RIGHT         AVRC_ID_RIGHT       /* right */
+#define BTA_AV_RC_RIGHT_UP      AVRC_ID_RIGHT_UP    /* right-up */
+#define BTA_AV_RC_RIGHT_DOWN    AVRC_ID_RIGHT_DOWN  /* right-down */
+#define BTA_AV_RC_LEFT_UP       AVRC_ID_LEFT_UP     /* left-up */
+#define BTA_AV_RC_LEFT_DOWN     AVRC_ID_LEFT_DOWN   /* left-down */
+#define BTA_AV_RC_ROOT_MENU     AVRC_ID_ROOT_MENU   /* root menu */
+#define BTA_AV_RC_SETUP_MENU    AVRC_ID_SETUP_MENU  /* setup menu */
+#define BTA_AV_RC_CONT_MENU     AVRC_ID_CONT_MENU   /* contents menu */
+#define BTA_AV_RC_FAV_MENU      AVRC_ID_FAV_MENU    /* favorite menu */
+#define BTA_AV_RC_EXIT          AVRC_ID_EXIT        /* exit */
+#define BTA_AV_RC_0             AVRC_ID_0           /* 0 */
+#define BTA_AV_RC_1             AVRC_ID_1           /* 1 */
+#define BTA_AV_RC_2             AVRC_ID_2           /* 2 */
+#define BTA_AV_RC_3             AVRC_ID_3           /* 3 */
+#define BTA_AV_RC_4             AVRC_ID_4           /* 4 */
+#define BTA_AV_RC_5             AVRC_ID_5           /* 5 */
+#define BTA_AV_RC_6             AVRC_ID_6           /* 6 */
+#define BTA_AV_RC_7             AVRC_ID_7           /* 7 */
+#define BTA_AV_RC_8             AVRC_ID_8           /* 8 */
+#define BTA_AV_RC_9             AVRC_ID_9           /* 9 */
+#define BTA_AV_RC_DOT           AVRC_ID_DOT         /* dot */
+#define BTA_AV_RC_ENTER         AVRC_ID_ENTER       /* enter */
+#define BTA_AV_RC_CLEAR         AVRC_ID_CLEAR       /* clear */
+#define BTA_AV_RC_CHAN_UP       AVRC_ID_CHAN_UP     /* channel up */
+#define BTA_AV_RC_CHAN_DOWN     AVRC_ID_CHAN_DOWN   /* channel down */
+#define BTA_AV_RC_PREV_CHAN     AVRC_ID_PREV_CHAN   /* previous channel */
+#define BTA_AV_RC_SOUND_SEL     AVRC_ID_SOUND_SEL   /* sound select */
+#define BTA_AV_RC_INPUT_SEL     AVRC_ID_INPUT_SEL   /* input select */
+#define BTA_AV_RC_DISP_INFO     AVRC_ID_DISP_INFO   /* display information */
+#define BTA_AV_RC_HELP          AVRC_ID_HELP        /* help */
+#define BTA_AV_RC_PAGE_UP       AVRC_ID_PAGE_UP     /* page up */
+#define BTA_AV_RC_PAGE_DOWN     AVRC_ID_PAGE_DOWN   /* page down */
+#define BTA_AV_RC_POWER         AVRC_ID_POWER       /* power */
+#define BTA_AV_RC_VOL_UP        AVRC_ID_VOL_UP      /* volume up */
+#define BTA_AV_RC_VOL_DOWN      AVRC_ID_VOL_DOWN    /* volume down */
+#define BTA_AV_RC_MUTE          AVRC_ID_MUTE        /* mute */
+#define BTA_AV_RC_PLAY          AVRC_ID_PLAY        /* play */
+#define BTA_AV_RC_STOP          AVRC_ID_STOP        /* stop */
+#define BTA_AV_RC_PAUSE         AVRC_ID_PAUSE       /* pause */
+#define BTA_AV_RC_RECORD        AVRC_ID_RECORD      /* record */
+#define BTA_AV_RC_REWIND        AVRC_ID_REWIND      /* rewind */
+#define BTA_AV_RC_FAST_FOR      AVRC_ID_FAST_FOR    /* fast forward */
+#define BTA_AV_RC_EJECT         AVRC_ID_EJECT       /* eject */
+#define BTA_AV_RC_FORWARD       AVRC_ID_FORWARD     /* forward */
+#define BTA_AV_RC_BACKWARD      AVRC_ID_BACKWARD    /* backward */
+#define BTA_AV_RC_ANGLE         AVRC_ID_ANGLE       /* angle */
+#define BTA_AV_RC_SUBPICT       AVRC_ID_SUBPICT     /* subpicture */
+#define BTA_AV_RC_F1            AVRC_ID_F1          /* F1 */
+#define BTA_AV_RC_F2            AVRC_ID_F2          /* F2 */
+#define BTA_AV_RC_F3            AVRC_ID_F3          /* F3 */
+#define BTA_AV_RC_F4            AVRC_ID_F4          /* F4 */
+#define BTA_AV_RC_F5            AVRC_ID_F5          /* F5 */
+#define BTA_AV_VENDOR           AVRC_ID_VENDOR      /* vendor unique */
+
+typedef UINT8 tBTA_AV_RC;
+
+/* state flag for pass through command */
+#define BTA_AV_STATE_PRESS      AVRC_STATE_PRESS    /* key pressed */
+#define BTA_AV_STATE_RELEASE    AVRC_STATE_RELEASE  /* key released */
+
+typedef UINT8 tBTA_AV_STATE;
+
+/* command codes for BTA_AvVendorCmd */
+#define BTA_AV_CMD_CTRL         AVRC_CMD_CTRL
+#define BTA_AV_CMD_STATUS       AVRC_CMD_STATUS
+#define BTA_AV_CMD_SPEC_INQ     AVRC_CMD_SPEC_INQ
+#define BTA_AV_CMD_NOTIF        AVRC_CMD_NOTIF
+#define BTA_AV_CMD_GEN_INQ      AVRC_CMD_GEN_INQ
+
+typedef UINT8 tBTA_AV_CMD;
+
+/* response codes for BTA_AvVendorRsp */
+#define BTA_AV_RSP_NOT_IMPL     AVRC_RSP_NOT_IMPL
+#define BTA_AV_RSP_ACCEPT       AVRC_RSP_ACCEPT
+#define BTA_AV_RSP_REJ          AVRC_RSP_REJ
+#define BTA_AV_RSP_IN_TRANS     AVRC_RSP_IN_TRANS
+#define BTA_AV_RSP_IMPL_STBL    AVRC_RSP_IMPL_STBL
+#define BTA_AV_RSP_CHANGED      AVRC_RSP_CHANGED
+#define BTA_AV_RSP_INTERIM      AVRC_RSP_INTERIM
+
+typedef UINT8 tBTA_AV_CODE;
+
+/* error codes for BTA_AvProtectRsp */
+#define BTA_AV_ERR_NONE             A2D_SUCCESS         /* Success, no error */
+#define BTA_AV_ERR_BAD_STATE        AVDT_ERR_BAD_STATE  /* Message cannot be processed in this state */
+#define BTA_AV_ERR_RESOURCE         AVDT_ERR_RESOURCE   /* Insufficient resources */
+#define BTA_AV_ERR_BAD_CP_TYPE      A2D_BAD_CP_TYPE     /* The requested Content Protection Type is not supported */
+#define BTA_AV_ERR_BAD_CP_FORMAT    A2D_BAD_CP_FORMAT   /* The format of Content Protection Data is not correct */
+
+typedef UINT8 tBTA_AV_ERR;
+
+
+/* AV callback events */
+#define BTA_AV_ENABLE_EVT       0       /* AV enabled */
+#define BTA_AV_REGISTER_EVT     1       /* registered to AVDT */
+#define BTA_AV_OPEN_EVT         2       /* connection opened */
+#define BTA_AV_CLOSE_EVT        3       /* connection closed */
+#define BTA_AV_START_EVT        4       /* stream data transfer started */
+#define BTA_AV_STOP_EVT         5       /* stream data transfer stopped */
+#define BTA_AV_PROTECT_REQ_EVT  6       /* content protection request */
+#define BTA_AV_PROTECT_RSP_EVT  7       /* content protection response */
+#define BTA_AV_RC_OPEN_EVT      8       /* remote control channel open */
+#define BTA_AV_RC_CLOSE_EVT     9       /* remote control channel closed */
+#define BTA_AV_REMOTE_CMD_EVT   10      /* remote control command */
+#define BTA_AV_REMOTE_RSP_EVT   11      /* remote control response */
+#define BTA_AV_VENDOR_CMD_EVT   12      /* vendor dependent remote control command */
+#define BTA_AV_VENDOR_RSP_EVT   13      /* vendor dependent remote control response */
+#define BTA_AV_RECONFIG_EVT     14      /* reconfigure response */
+#define BTA_AV_SUSPEND_EVT      15      /* suspend response */
+#define BTA_AV_PENDING_EVT      16      /* incoming connection pending:
+                                         * signal channel is open and stream is not open
+                                         * after BTA_AV_SIG_TIME_VAL ms */
+#define BTA_AV_META_MSG_EVT     17      /* metadata messages */
+#define BTA_AV_REJECT_EVT       18      /* incoming connection rejected */
+#define BTA_AV_RC_FEAT_EVT      19      /* remote control channel peer supported features update */
+/* Max BTA event */
+#define BTA_AV_MAX_EVT          20
+
+typedef UINT8 tBTA_AV_EVT;
+
+/* Event associated with BTA_AV_ENABLE_EVT */
+typedef struct
+{
+    tBTA_AV_FEAT    features;
+} tBTA_AV_ENABLE;
+
+/* Event associated with BTA_AV_REGISTER_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;       /* audio/video */
+    tBTA_AV_HNDL    hndl;       /* Handle associated with the stream. */
+    UINT8           app_id;     /* ID associated with call to BTA_AvRegister() */
+    tBTA_AV_STATUS  status;
+} tBTA_AV_REGISTER;
+
+/* data associated with BTA_AV_OPEN_EVT */
+#define BTA_AV_EDR_2MBPS        0x01
+#define BTA_AV_EDR_3MBPS        0x02
+typedef UINT8 tBTA_AV_EDR;
+
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    BD_ADDR         bd_addr;
+    tBTA_AV_STATUS  status;
+    BOOLEAN         starting;
+    tBTA_AV_EDR     edr;        /* 0, if peer device does not support EDR */
+} tBTA_AV_OPEN;
+
+/* data associated with BTA_AV_CLOSE_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+} tBTA_AV_CLOSE;
+
+/* data associated with BTA_AV_START_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    tBTA_AV_STATUS  status;
+    BOOLEAN         initiator; /* TRUE, if local device initiates the START */
+    BOOLEAN         suspending;
+} tBTA_AV_START;
+
+/* data associated with BTA_AV_SUSPEND_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    BOOLEAN         initiator; /* TRUE, if local device initiates the SUSPEND */
+    tBTA_AV_STATUS  status;
+} tBTA_AV_SUSPEND;
+
+/* data associated with BTA_AV_RECONFIG_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    tBTA_AV_STATUS  status;
+} tBTA_AV_RECONFIG;
+
+/* data associated with BTA_AV_PROTECT_REQ_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    UINT8           *p_data;
+    UINT16          len;
+} tBTA_AV_PROTECT_REQ;
+
+/* data associated with BTA_AV_PROTECT_RSP_EVT */
+typedef struct
+{
+    tBTA_AV_CHNL    chnl;
+    tBTA_AV_HNDL    hndl;
+    UINT8           *p_data;
+    UINT16          len;
+    tBTA_AV_ERR     err_code;
+} tBTA_AV_PROTECT_RSP;
+
+/* data associated with BTA_AV_RC_OPEN_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    tBTA_AV_FEAT    peer_features;
+    BD_ADDR         peer_addr;
+    tBTA_AV_STATUS  status;
+} tBTA_AV_RC_OPEN;
+
+/* data associated with BTA_AV_RC_CLOSE_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    BD_ADDR         peer_addr;
+} tBTA_AV_RC_CLOSE;
+
+/* data associated with BTA_AV_RC_FEAT_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    tBTA_AV_FEAT    peer_features;
+} tBTA_AV_RC_FEAT;
+
+/* data associated with BTA_AV_REMOTE_CMD_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    tBTA_AV_RC      rc_id;
+    tBTA_AV_STATE   key_state;
+    UINT8           len;
+    UINT8           *p_data;
+    tAVRC_HDR       hdr;    /* Message header. */
+    UINT8           label;
+} tBTA_AV_REMOTE_CMD;
+
+/* data associated with BTA_AV_REMOTE_RSP_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    tBTA_AV_RC      rc_id;
+    tBTA_AV_STATE   key_state;
+    UINT8           len;
+    UINT8           *p_data;
+    tBTA_AV_CODE    rsp_code;
+    UINT8           label;
+} tBTA_AV_REMOTE_RSP;
+
+/* data associated with BTA_AV_VENDOR_CMD_EVT, BTA_AV_VENDOR_RSP_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    UINT16          len;            /* Max vendor dependent message is 512 */
+    UINT8           label;
+    tBTA_AV_CODE    code;
+    UINT32          company_id;
+    UINT8           *p_data;
+} tBTA_AV_VENDOR;
+
+/* data associated with BTA_AV_META_MSG_EVT */
+typedef struct
+{
+    UINT8           rc_handle;
+    UINT16          len;
+    UINT8           label;
+    tBTA_AV_CODE    code;
+    UINT32          company_id;
+    UINT8           *p_data;
+    tAVRC_MSG       *p_msg;
+} tBTA_AV_META_MSG;
+
+/* data associated with BTA_AV_PENDING_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;
+} tBTA_AV_PEND;
+
+/* data associated with BTA_AV_REJECT_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;
+    tBTA_AV_HNDL    hndl;       /* Handle associated with the stream that rejected the connection. */
+} tBTA_AV_REJECT;
+
+
+/* union of data associated with AV callback */
+typedef union
+{
+    tBTA_AV_CHNL        chnl;
+    tBTA_AV_ENABLE      enable;
+    tBTA_AV_REGISTER    registr;
+    tBTA_AV_OPEN        open;
+    tBTA_AV_CLOSE       close;
+    tBTA_AV_START       start;
+    tBTA_AV_PROTECT_REQ protect_req;
+    tBTA_AV_PROTECT_RSP protect_rsp;
+    tBTA_AV_RC_OPEN     rc_open;
+    tBTA_AV_RC_CLOSE    rc_close;
+    tBTA_AV_REMOTE_CMD  remote_cmd;
+    tBTA_AV_REMOTE_RSP  remote_rsp;
+    tBTA_AV_VENDOR      vendor_cmd;
+    tBTA_AV_VENDOR      vendor_rsp;
+    tBTA_AV_RECONFIG    reconfig;
+    tBTA_AV_SUSPEND     suspend;
+    tBTA_AV_PEND        pend;
+    tBTA_AV_META_MSG    meta_msg;
+    tBTA_AV_REJECT      reject;
+    tBTA_AV_RC_FEAT     rc_feat;
+} tBTA_AV;
+
+
+#define BTA_AVC_PACKET_LEN                  AVRC_PACKET_LEN
+#define BTA_VENDOR_DATA_OFFSET              6
+#define BTA_VENDOR_HEADER_LEN               4
+#define BTA_MAX_VENDOR_DEPENDENT_DATA_LEN   (BTA_AVC_PACKET_LEN-BTA_VENDOR_DATA_OFFSET-BTA_VENDOR_HEADER_LEN)
+#define BTA_GROUP_NAVI_MSG_OP_DATA_LEN      5
+
+#define BTA_ERROR_INVALID_CMD           AVRC_STS_BAD_CMD
+#define BTA_ERROR_INVALID_PARAM         AVRC_STS_BAD_PARAM
+#define BTA_ERROR_BAD_CONTENTS          AVRC_STS_NOT_FOUND
+#define BTA_ERROR_INTERNAL              AVRC_STS_INTERNAL_ERR
+
+#define BTA_AV_META_SINGLE_PACKET       AVRC_PKT_SINGLE
+
+#define BTA_AV_CO_METADATA              AVRC_CO_METADATA
+
+/* AV callback */
+typedef void (tBTA_AV_CBACK)(tBTA_AV_EVT event, tBTA_AV *p_data);
+
+/* type for stream state machine action functions */
+typedef void (*tBTA_AV_ACT)(void *p_cb, void *p_data);
+
+/* type for registering VDP */
+typedef void (tBTA_AV_REG) (tAVDT_CS *p_cs, char *p_service_name, void *p_data);
+
+/* AV configuration structure */
+typedef struct
+{
+    UINT32  company_id;         /* AVRCP Company ID */
+    UINT16  avrc_mtu;           /* AVRCP MTU at L2CAP for control channel */
+    UINT16  avrc_br_mtu;        /* AVRCP MTU at L2CAP for browsing channel */
+    UINT16  avrc_ct_cat;        /* AVRCP controller categories */
+    UINT16  avrc_tg_cat;        /* AVRCP target categories */
+    UINT16  sig_mtu;            /* AVDTP signaling channel MTU at L2CAP */
+    UINT16  audio_mtu;          /* AVDTP audio transport channel MTU at L2CAP */
+    const UINT16 *p_audio_flush_to;/* AVDTP audio transport channel flush timeout */
+    UINT16  audio_mqs;          /* AVDTP audio channel max data queue size */
+    UINT16  video_mtu;          /* AVDTP video transport channel MTU at L2CAP */
+    UINT16  video_flush_to;     /* AVDTP video transport channel flush timeout */
+    BOOLEAN avrc_group;         /* TRUE, to accept AVRC 1.3 group nevigation command */
+    UINT8   num_co_ids;         /* company id count in p_meta_co_ids */
+    UINT8   num_evt_ids;        /* event id count in p_meta_evt_ids */
+    tBTA_AV_CODE  rc_pass_rsp;  /* the default response code for pass through commands */
+    const UINT32 *p_meta_co_ids;/* the metadata Get Capabilities response for company id */
+    const UINT8 *p_meta_evt_ids;/* the the metadata Get Capabilities response for event id */
+    const tBTA_AV_ACT *p_act_tbl;/* the action function table for VDP stream */
+    tBTA_AV_REG       *p_reg;   /* action function to register VDP */
+} tBTA_AV_CFG;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         BTA_AvEnable
+**
+** Description      Enable the advanced audio/video service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_AV_ENABLE_EVT. This function must
+**                  be called before other function in the AV API are
+**                  called.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvEnable(tBTA_SEC sec_mask, tBTA_AV_FEAT features,
+                          tBTA_AV_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_AvDisable
+**
+** Description      Disable the advanced audio/video service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvDisable(void);
+
+/*******************************************************************************
+**
+** Function         BTA_AvRegister
+**
+** Description      Register the audio or video service to stack. When the
+**                  operation is complete the callback function will be
+**                  called with a BTA_AV_REGISTER_EVT. This function must
+**                  be called before AVDT stream is open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvRegister(tBTA_AV_CHNL chnl, const char *p_service_name,
+                            UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         BTA_AvDeregister
+**
+** Description      Deregister the audio or video service
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvDeregister(tBTA_AV_HNDL hndl);
+
+/*******************************************************************************
+**
+** Function         BTA_AvOpen
+**
+** Description      Opens an advanced audio/video connection to a peer device.
+**                  When connection is open callback function is called
+**                  with a BTA_AV_OPEN_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvOpen(BD_ADDR bd_addr, tBTA_AV_HNDL handle,
+                        BOOLEAN use_rc, tBTA_SEC sec_mask);
+
+/*******************************************************************************
+**
+** Function         BTA_AvClose
+**
+** Description      Close the current streams.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvClose(tBTA_AV_HNDL handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AvDisconnect
+**
+** Description      Close the connection to the address.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvDisconnect(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_AvStart
+**
+** Description      Start audio/video stream data transfer.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvStart(void);
+
+/*******************************************************************************
+**
+** Function         BTA_AvStop
+**
+** Description      Stop audio/video stream data transfer.
+**                  If suspend is TRUE, this function sends AVDT suspend signal
+**                  to the connected peer(s).
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvStop(BOOLEAN suspend);
+
+/*******************************************************************************
+**
+** Function         BTA_AvReconfig
+**
+** Description      Reconfigure the audio/video stream.
+**                  If suspend is TRUE, this function tries the suspend/reconfigure
+**                  procedure first.
+**                  If suspend is FALSE or when suspend/reconfigure fails,
+**                  this function closes and re-opens the AVDT connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvReconfig(tBTA_AV_HNDL hndl, BOOLEAN suspend, UINT8 sep_info_idx,
+                            UINT8 *p_codec_info, UINT8 num_protect, UINT8 *p_protect_info);
+
+/*******************************************************************************
+**
+** Function         BTA_AvProtectReq
+**
+** Description      Send a content protection request.  This function can only
+**                  be used if AV is enabled with feature BTA_AV_FEAT_PROTECT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvProtectReq(tBTA_AV_HNDL hndl, UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_AvProtectRsp
+**
+** Description      Send a content protection response.  This function must
+**                  be called if a BTA_AV_PROTECT_REQ_EVT is received.
+**                  This function can only be used if AV is enabled with
+**                  feature BTA_AV_FEAT_PROTECT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvProtectRsp(tBTA_AV_HNDL hndl, UINT8 error_code, UINT8 *p_data,
+                              UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_AvRemoteCmd
+**
+** Description      Send a remote control command.  This function can only
+**                  be used if AV is enabled with feature BTA_AV_FEAT_RCCT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvRemoteCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_RC rc_id,
+                             tBTA_AV_STATE key_state);
+
+/*******************************************************************************
+**
+** Function         BTA_AvVendorCmd
+**
+** Description      Send a vendor dependent remote control command.  This
+**                  function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_VENDOR.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvVendorCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE cmd_code,
+                             UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_AvVendorRsp
+**
+** Description      Send a vendor dependent remote control response.
+**                  This function must be called if a BTA_AV_VENDOR_CMD_EVT
+**                  is received. This function can only be used if AV is
+**                  enabled with feature BTA_AV_FEAT_VENDOR.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvVendorRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code,
+                             UINT8 *p_data, UINT16 len, UINT32 company_id);
+
+
+/*******************************************************************************
+**
+** Function         BTA_AvOpenRc
+**
+** Description      Open an AVRCP connection toward the device with the
+**                  specified handle
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvOpenRc(tBTA_AV_HNDL handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AvCloseRc
+**
+** Description      Close an AVRCP connection
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvCloseRc(UINT8 rc_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_AvMetaRsp
+**
+** Description      Send a Metadata command/response. The message contained
+**                  in p_pkt can be composed with AVRC utility functions.
+**                  This function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_METADATA.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvMetaRsp(UINT8 rc_handle, UINT8 label, tBTA_AV_CODE rsp_code,
+                               BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function         BTA_AvMetaCmd
+**
+** Description      Send a Metadata/Advanced Control command. The message contained
+**                  in p_pkt can be composed with AVRC utility functions.
+**                  This function can only be used if AV is enabled with feature
+**                  BTA_AV_FEAT_METADATA.
+**                  This message is sent only when the peer supports the TG role.
+*8                  The only command makes sense right now is the absolute volume command.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_AvMetaCmd(UINT8 rc_handle, UINT8 label, tBTA_AV_CMD cmd_code, BT_HDR *p_pkt);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_AV_API_H */
diff --git a/bta/include/bta_av_ci.h b/bta/include/bta_av_ci.h
new file mode 100644
index 0000000..63668a9
--- /dev/null
+++ b/bta/include/bta_av_ci.h
@@ -0,0 +1,74 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for advanced audio/video call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_AV_CI_H
+#define BTA_AV_CI_H
+
+#include "bta_av_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_av_ci_src_data_ready
+**
+** Description      This function sends an event to the AV indicating that
+**                  the phone has audio stream data ready to send and AV
+**                  should call bta_av_co_audio_src_data_path() or
+**                  bta_av_co_video_src_data_path().
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_ci_src_data_ready(tBTA_AV_CHNL chnl);
+
+/*******************************************************************************
+**
+** Function         bta_av_ci_setconfig
+**
+** Description      This function must be called in response to function
+**                  bta_av_co_audio_setconfig() or bta_av_co_video_setconfig.
+**                  Parameter err_code is set to an AVDTP status value;
+**                  AVDT_SUCCESS if the codec configuration is ok,
+**                  otherwise error.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_ci_setconfig(tBTA_AV_HNDL hndl, UINT8 err_code,
+                                        UINT8 category, UINT8 num_seid, UINT8 *p_seid,
+                                        BOOLEAN recfg_needed);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_AV_CI_H */
+
diff --git a/bta/include/bta_av_co.h b/bta/include/bta_av_co.h
new file mode 100644
index 0000000..862ac5e
--- /dev/null
+++ b/bta/include/bta_av_co.h
@@ -0,0 +1,392 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for advanced audio/video call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_AV_CO_H
+#define BTA_AV_CO_H
+
+#include "l2c_api.h"
+#include "bta_av_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* TRUE to use SCMS-T content protection */
+#ifndef BTA_AV_CO_CP_SCMS_T
+#define BTA_AV_CO_CP_SCMS_T     FALSE
+#endif
+
+/* the content protection IDs assigned by BT SIG */
+#define BTA_AV_CP_SCMS_T_ID     0x0002
+#define BTA_AV_CP_DTCP_ID       0x0001
+
+#define BTA_AV_CP_LOSC                  2
+#define BTA_AV_CP_INFO_LEN              3
+
+#define BTA_AV_CP_SCMS_COPY_MASK        3
+#define BTA_AV_CP_SCMS_COPY_FREE        2
+#define BTA_AV_CP_SCMS_COPY_ONCE        1
+#define BTA_AV_CP_SCMS_COPY_NEVER       0
+
+#define BTA_AV_CO_DEFAULT_AUDIO_OFFSET      AVDT_MEDIA_OFFSET
+
+enum
+{
+    BTA_AV_CO_ST_INIT,
+    BTA_AV_CO_ST_IN,
+    BTA_AV_CO_ST_OUT,
+    BTA_AV_CO_ST_OPEN,
+    BTA_AV_CO_ST_STREAM
+};
+
+
+/* data type for the Audio Codec Information*/
+typedef struct
+{
+    UINT16  bit_rate;       /* SBC encoder bit rate in kbps */
+    UINT16  bit_rate_busy;  /* SBC encoder bit rate in kbps */
+    UINT16  bit_rate_swampd;/* SBC encoder bit rate in kbps */
+    UINT8   busy_level;     /* Busy level indicating the bit-rate to be used */
+    UINT8   codec_info[AVDT_CODEC_SIZE];
+    UINT8   codec_type;     /* Codec type */
+} tBTA_AV_AUDIO_CODEC_INFO;
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_init
+**
+** Description      This callout function is executed by AV when it is
+**                  started by calling BTA_AvEnable().  This function can be
+**                  used by the phone to initialize audio paths or for other
+**                  initialization purposes.
+**
+**
+** Returns          Stream codec and content protection capabilities info.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_av_co_audio_init(UINT8 *p_codec_type, UINT8 *p_codec_info,
+                                   UINT8 *p_num_protect, UINT8 *p_protect_info, UINT8 index);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_disc_res
+**
+** Description      This callout function is executed by AV to report the
+**                  number of stream end points (SEP) were found during the
+**                  AVDT stream discovery process.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_disc_res(tBTA_AV_HNDL hndl, UINT8 num_seps,
+                                             UINT8 num_snk, BD_ADDR addr);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_disc_res
+**
+** Description      This callout function is executed by AV to report the
+**                  number of stream end points (SEP) were found during the
+**                  AVDT stream discovery process.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_disc_res(tBTA_AV_HNDL hndl, UINT8 num_seps,
+                                             UINT8 num_snk, BD_ADDR addr);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_getconfig
+**
+** Description      This callout function is executed by AV to retrieve the
+**                  desired codec and content protection configuration for the
+**                  audio stream.
+**
+**
+** Returns          Stream codec and content protection configuration info.
+**
+*******************************************************************************/
+BTA_API extern UINT8 bta_av_co_audio_getconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                         UINT8 *p_codec_info, UINT8 *p_sep_info_idx, UINT8 seid,
+                                         UINT8 *p_num_protect, UINT8 *p_protect_info);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_getconfig
+**
+** Description      This callout function is executed by AV to retrieve the
+**                  desired codec and content protection configuration for the
+**                  video stream.
+**
+**
+** Returns          Stream codec and content protection configuration info.
+**
+*******************************************************************************/
+BTA_API extern UINT8 bta_av_co_video_getconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                         UINT8 *p_codec_info, UINT8 *p_sep_info_idx, UINT8 seid,
+                                         UINT8 *p_num_protect, UINT8 *p_protect_info);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_setconfig
+**
+** Description      This callout function is executed by AV to set the
+**                  codec and content protection configuration of the audio stream.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_setconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                        UINT8 *p_codec_info, UINT8 seid, BD_ADDR addr,
+                                        UINT8 num_protect, UINT8 *p_protect_info);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_setconfig
+**
+** Description      This callout function is executed by AV to set the
+**                  codec and content protection configuration of the video stream.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_setconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                        UINT8 *p_codec_info, UINT8 seid, BD_ADDR addr,
+                                        UINT8 num_protect, UINT8 *p_protect_info);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_open
+**
+** Description      This function is called by AV when the audio stream connection
+**                  is opened.
+**                  BTA-AV maintains the MTU of A2DP streams.
+**                  If this is the 2nd audio stream, mtu is the smaller of the 2
+**                  streams.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_open(tBTA_AV_HNDL hndl,
+                                         tBTA_AV_CODEC codec_type, UINT8 *p_codec_info,
+                                         UINT16 mtu);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_open
+**
+** Description      This function is called by AV when the video stream connection
+**                  is opened.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_open(tBTA_AV_HNDL hndl,
+                                         tBTA_AV_CODEC codec_type, UINT8 *p_codec_info,
+                                         UINT16 mtu);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_close
+**
+** Description      This function is called by AV when the audio stream connection
+**                  is closed.
+**                  BTA-AV maintains the MTU of A2DP streams.
+**                  When one stream is closed and no other audio stream is open,
+**                  mtu is reported as 0.
+**                  Otherwise, the MTU remains open is reported.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_close(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                          UINT16 mtu);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_close
+**
+** Description      This function is called by AV when the video stream connection
+**                  is closed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_close(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+                                          UINT16 mtu);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_start
+**
+** Description      This function is called by AV when the audio streaming data
+**                  transfer is started.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_start(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+        UINT8 *p_codec_info, BOOLEAN *p_no_rtp_hdr);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_start
+**
+** Description      This function is called by AV when the video streaming data
+**                  transfer is started.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_start(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+        UINT8 *p_codec_info, BOOLEAN *p_no_rtp_hdr);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_stop
+**
+** Description      This function is called by AV when the audio streaming data
+**                  transfer is stopped.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_stop(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_stop
+**
+** Description      This function is called by AV when the video streaming data
+**                  transfer is stopped.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_stop(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_src_data_path
+**
+** Description      This function is called to get the next data buffer from
+**                  the audio codec
+**
+** Returns          NULL if data is not ready.
+**                  Otherwise, a GKI buffer (BT_HDR*) containing the audio data.
+**
+*******************************************************************************/
+BTA_API extern void * bta_av_co_audio_src_data_path(tBTA_AV_CODEC codec_type,
+                                                    UINT32 *p_len, UINT32 *p_timestamp);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_src_data_path
+**
+** Description      This function is called to get the next data buffer from
+**                  the video codec.
+**
+** Returns          NULL if data is not ready.
+**                  Otherwise, a video data buffer (UINT8*).
+**
+*******************************************************************************/
+BTA_API extern void * bta_av_co_video_src_data_path(tBTA_AV_CODEC codec_type,
+                                                    UINT32 *p_len, UINT32 *p_timestamp);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_drop
+**
+** Description      An Audio packet is dropped. .
+**                  It's very likely that the connected headset with this handle
+**                  is moved far away. The implementation may want to reduce
+**                  the encoder bit rate setting to reduce the packet size.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_drop(tBTA_AV_HNDL hndl);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_report_conn
+**
+** Description      This function is called by AV when the reporting channel is
+**                  opened (open=TRUE) or closed (open=FALSE).
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_report_conn (BOOLEAN open, UINT8 avdt_handle);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_report_rr
+**
+** Description      This function is called by AV when a Receiver Report is
+**                  received
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_report_rr (UINT32 packet_lost);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_audio_delay
+**
+** Description      This function is called by AV when the audio stream connection
+**                  needs to send the initial delay report to the connected SRC.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_audio_delay(tBTA_AV_HNDL hndl, UINT16 delay);
+
+/*******************************************************************************
+**
+** Function         bta_av_co_video_delay
+**
+** Description      This function is called by AV when the video stream connection
+**                  needs to send the initial delay report to the connected SRC.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_av_co_video_delay(tBTA_AV_HNDL hndl, UINT16 delay);
+
+#endif /* BTA_AV_CO_H */
+
diff --git a/bta/include/bta_av_sbc.h b/bta/include/bta_av_sbc.h
new file mode 100644
index 0000000..98eb6ae
--- /dev/null
+++ b/bta/include/bta_av_sbc.h
@@ -0,0 +1,207 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface to utility functions for dealing with SBC data
+ *  frames and codec capabilities.
+ *
+ ******************************************************************************/
+#ifndef BTA_AV_SBC_H
+#define BTA_AV_SBC_H
+
+/*****************************************************************************
+**  constants
+*****************************************************************************/
+
+/* SBC packet header size */
+#define BTA_AV_SBC_HDR_SIZE         A2D_SBC_MPL_HDR_LEN
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_init_up_sample
+**
+** Description      initialize the up sample
+**
+**                  src_sps: samples per second (source audio data)
+**                  dst_sps: samples per second (converted audio data)
+**                  bits: number of bits per pcm sample
+**                  n_channels: number of channels (i.e. mono(1), stereo(2)...)
+**
+** Returns          none
+**
+*******************************************************************************/
+extern void bta_av_sbc_init_up_sample (UINT32 src_sps, UINT32 dst_sps,
+                                       UINT16 bits, UINT16 n_channels);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (number of bytes)
+**                  dst_samples: The size of p_dst (number of bytes)
+**
+** Note:            An AE reported an issue with this function.
+**                  When called with bta_av_sbc_up_sample(src, uint8_array_dst..)
+**                  the byte before uint8_array_dst may get overwritten.
+**                  Using uint16_array_dst avoids the problem.
+**                  This issue is related to endian-ness and is hard to resolve
+**                  in a generic manner.
+** **************** Please use uint16 array as dst.
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+extern int bta_av_sbc_up_sample (void *p_src, void *p_dst,
+                                 UINT32 src_samples, UINT32 dst_samples,
+                                 UINT32 *p_ret);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_16s (16bits-stereo)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 4 bytes)
+**                  dst_samples: The size of p_dst (in uint of 4 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+extern int bta_av_sbc_up_sample_16s (void *p_src, void *p_dst,
+                                 UINT32 src_samples, UINT32 dst_samples,
+                                 UINT32 *p_ret);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_16m (16bits-mono)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 2 bytes)
+**                  dst_samples: The size of p_dst (in uint of 2 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+extern int bta_av_sbc_up_sample_16m (void *p_src, void *p_dst,
+                                     UINT32 src_samples, UINT32 dst_samples,
+                                     UINT32 *p_ret);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_8s (8bits-stereo)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (in uint of 2 bytes)
+**                  dst_samples: The size of p_dst (in uint of 2 bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+extern int bta_av_sbc_up_sample_8s (void *p_src, void *p_dst,
+                                 UINT32 src_samples, UINT32 dst_samples,
+                                 UINT32 *p_ret);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_up_sample_8m (8bits-mono)
+**
+** Description      Given the source (p_src) audio data and
+**                  source speed (src_sps, samples per second),
+**                  This function converts it to audio data in the desired format
+**
+**                  p_src: the data buffer that holds the source audio data
+**                  p_dst: the data buffer to hold the converted audio data
+**                  src_samples: The number of source samples (number of bytes)
+**                  dst_samples: The size of p_dst (number of bytes)
+**
+** Returns          The number of bytes used in p_dst
+**                  The number of bytes used in p_src (in *p_ret)
+**
+*******************************************************************************/
+extern int bta_av_sbc_up_sample_8m (void *p_src, void *p_dst,
+                                     UINT32 src_samples, UINT32 dst_samples,
+                                     UINT32 *p_ret);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_cfg_for_cap
+**
+** Description      Determine the preferred SBC codec configuration for the
+**                  given codec capabilities.  The function is passed the
+**                  preferred codec configuration and the peer codec
+**                  capabilities for the stream.  The function attempts to
+**                  match the preferred capabilities with the configuration
+**                  as best it can.  The resulting codec configuration is
+**                  returned in the same memory used for the capabilities.
+**
+** Returns          0 if ok, nonzero if error.
+**                  Codec configuration in p_cap.
+**
+*******************************************************************************/
+extern UINT8 bta_av_sbc_cfg_for_cap(UINT8 *p_peer, tA2D_SBC_CIE *p_cap, tA2D_SBC_CIE *p_pref);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_cfg_in_cap
+**
+** Description      This function checks whether an SBC codec configuration
+**                  is allowable for the given codec capabilities.
+**
+** Returns          0 if ok, nonzero if error.
+**
+*******************************************************************************/
+extern UINT8 bta_av_sbc_cfg_in_cap(UINT8 *p_cfg, tA2D_SBC_CIE *p_cap);
+
+/*******************************************************************************
+**
+** Function         bta_av_sbc_bld_hdr
+**
+** Description      This function builds the packet header for MPF1.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void bta_av_sbc_bld_hdr(BT_HDR *p_buf, UINT16 fr_per_pkt);
+
+#endif /* BTA_AV_SBC_H */
+
diff --git a/bta/include/bta_dm_ci.h b/bta/include/bta_dm_ci.h
new file mode 100644
index 0000000..bf0983e
--- /dev/null
+++ b/bta/include/bta_dm_ci.h
@@ -0,0 +1,81 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for device mananger call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_DM_CI_H
+#define BTA_DM_CI_H
+
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_dm_ci_io_req
+**
+** Description      This function must be called in response to function
+**                  bta_dm_co_io_req(), if *p_oob_data is set to BTA_OOB_UNKNOWN
+**                  by bta_dm_co_io_req().
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_ci_io_req(BD_ADDR bd_addr, tBTA_IO_CAP io_cap,
+                                     tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         bta_dm_ci_rmt_oob
+**
+** Description      This function must be called in response to function
+**                  bta_dm_co_rmt_oob() to provide the OOB data associated
+**                  with the remote device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_ci_rmt_oob(BOOLEAN accept, BD_ADDR bd_addr,
+                                      BT_OCTET16 c, BT_OCTET16 r);
+/*******************************************************************************
+**
+** Function         bta_dm_sco_ci_data_ready
+**
+** Description      This function sends an event to indicating that the phone
+**                  has SCO data ready..
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_sco_ci_data_ready(UINT16 event, UINT16 sco_handle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/bta/include/bta_dm_co.h b/bta/include/bta_dm_co.h
new file mode 100644
index 0000000..864104e
--- /dev/null
+++ b/bta/include/bta_dm_co.h
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for device mananger callout functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_DM_CO_H
+#define BTA_DM_CO_H
+
+#include "bta_sys.h"
+
+
+#ifndef BTA_SCO_OUT_PKT_SIZE
+    #define BTA_SCO_OUT_PKT_SIZE    BTM_SCO_DATA_SIZE_MAX
+#endif
+
+#define BTA_SCO_CODEC_PCM       0       /* used for regular SCO */
+#define BTA_SCO_CODEC_SBC       1       /* used for WBS */
+typedef UINT8   tBTA_SCO_CODEC_TYPE;
+
+#define BTA_DM_SCO_SAMP_RATE_8K     8000
+#define BTA_DM_SCO_SAMP_RATE_16K    16000
+
+/* SCO codec information */
+typedef struct
+{
+    tBTA_SCO_CODEC_TYPE   codec_type;
+}tBTA_CODEC_INFO;
+
+#define BTA_DM_SCO_ROUTE_PCM	BTM_SCO_ROUTE_PCM
+#define BTA_DM_SCO_ROUTE_HCI	BTM_SCO_ROUTE_HCI
+
+typedef tBTM_SCO_ROUTE_TYPE tBTA_DM_SCO_ROUTE_TYPE;
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_io_req
+**
+** Description      This callout function is executed by DM to get IO capabilities
+**                  of the local device for the Simple Pairing process
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_io_cap - The local Input/Output capabilities
+**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
+**                  *p_auth_req - TRUE, if MITM protection is required.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap,
+                                     tBTA_OOB_DATA *p_oob_data, tBTA_AUTH_REQ *p_auth_req,
+                                     BOOLEAN is_orig);
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_io_rsp
+**
+** Description      This callout function is executed by DM to report IO capabilities
+**                  of the peer device for the Simple Pairing process
+**
+** Parameters       bd_addr  - The peer device
+**                  io_cap - The remote Input/Output capabilities
+**                  oob_data - TRUE, if OOB data is available for the peer device.
+**                  auth_req - TRUE, if MITM protection is required.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap,
+                                     tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_lk_upgrade
+**
+** Description      This callout function is executed by DM to check if the
+**                  platform wants allow link key upgrade
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_upgrade - TRUE, if link key upgrade is desired.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void  bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade );
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_loc_oob
+**
+** Description      This callout function is executed by DM to report the OOB
+**                  data of the local device for the Simple Pairing process
+**
+** Parameters       valid - TRUE, if the local OOB data is retrieved from LM
+**                  c     - Simple Pairing Hash C
+**                  r     - Simple Pairing Randomnizer R
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r);
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_rmt_oob
+**
+** Description      This callout function is executed by DM to request the OOB
+**                  data for the remote device for the Simple Pairing process
+**
+** Parameters       bd_addr  - The peer device
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_rmt_oob(BD_ADDR bd_addr);
+
+/*****************************************************************************
+**  SCO over HCI Function Declarations
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_init
+**
+** Description      This function can be used by the phone to initialize audio
+**                  codec or for other initialization purposes before SCO connection
+**                  is opened.
+**
+**
+** Returns          Void.
+**
+*******************************************************************************/
+BTA_API extern tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(UINT32 rx_bw, UINT32 tx_bw,
+                                                         tBTA_CODEC_INFO *p_codec_info, UINT8 app_id);
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_open
+**
+** Description      This function is executed when a SCO connection is open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_sco_co_open(UINT16 handle, UINT8 pkt_size, UINT16 event);
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_close
+**
+** Description      This function is called when a SCO connection is closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_sco_co_close(void);
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_out_data
+**
+** Description      This function is called to send SCO data over HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_sco_co_out_data(BT_HDR  **p_buf);
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_in_data
+**
+** Description      This function is called to send incoming SCO data to application.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_sco_co_in_data(BT_HDR  *p_buf, tBTM_SCO_DATA_FLAG status);
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_ble_io_req
+**
+** Description      This callout function is executed by DM to get BLE IO capabilities
+**                  before SMP pairing gets going.
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_io_cap - The local Input/Output capabilities
+**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
+**                  *p_auth_req -  Auth request setting (Bonding and MITM required or not)
+**                  *p_max_key_size - max key size local device supported.
+**                  *p_init_key - initiator keys.
+**                  *p_resp_key - responder keys.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr,  tBTA_IO_CAP *p_io_cap,
+                                        tBTA_OOB_DATA *p_oob_data,
+                                        tBTA_LE_AUTH_REQ *p_auth_req,
+                                        UINT8 *p_max_key_size,
+                                        tBTA_LE_KEY_TYPE *p_init_key,
+                                        tBTA_LE_KEY_TYPE  *p_resp_key );
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_ble_local_key_reload
+**
+** Description      This callout function is to load the local BLE keys if available
+**                  on the device.
+**
+** Parameters       none
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_ble_load_local_keys (tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er,
+                                                   tBTA_BLE_LOCAL_ID_KEYS *p_id_keys);
+
+// btla-specific ++
+/*******************************************************************************
+**
+** Function         bta_dm_co_ble_io_req
+**
+** Description      This callout function is executed by DM to get BLE IO capabilities
+**                  before SMP pairing gets going.
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_io_cap - The local Input/Output capabilities
+**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
+**                  *p_auth_req -  Auth request setting (Bonding and MITM required or not)
+**                  *p_max_key_size - max key size local device supported.
+**                  *p_init_key - initiator keys.
+**                  *p_resp_key - responder keys.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr,  tBTA_IO_CAP *p_io_cap,
+                         tBTA_OOB_DATA *p_oob_data,
+                         tBTA_LE_AUTH_REQ *p_auth_req,
+                         UINT8 *p_max_key_size,
+                         tBTA_LE_KEY_TYPE *p_init_key,
+                         tBTA_LE_KEY_TYPE  *p_resp_key );
+// btla-specific --
+
+#endif
diff --git a/bta/include/bta_fs_api.h b/bta/include/bta_fs_api.h
new file mode 100644
index 0000000..a3c34e0
--- /dev/null
+++ b/bta/include/bta_fs_api.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the file system of BTA, Broadcom's
+ *  Bluetooth application layer for mobile phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_FS_API_H
+#define BTA_FS_API_H
+
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* Configuration structure */
+typedef struct
+{
+    UINT16  max_file_len;           /* Maximum size file name */
+    UINT16  max_path_len;           /* Maximum path length (includes appended file name) */
+    char    path_separator;         /* 0x2f ('/'), or 0x5c ('\') */
+} tBTA_FS_CFG;
+
+extern tBTA_FS_CFG * p_bta_fs_cfg;
+
+#endif /* BTA_FS_API_H */
diff --git a/bta/include/bta_fs_ci.h b/bta/include/bta_fs_ci.h
new file mode 100644
index 0000000..e2b5093
--- /dev/null
+++ b/bta/include/bta_fs_ci.h
@@ -0,0 +1,256 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for file system call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_FS_CI_H
+#define BTA_FS_CI_H
+
+#include "bta_fs_co.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* Open Complete Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+    UINT32            file_size;
+    int               fd;
+    const char        *p_file;
+} tBTA_FS_CI_OPEN_EVT;
+
+/* Read Ready Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+    int               fd;
+    UINT16            num_read;
+} tBTA_FS_CI_READ_EVT;
+
+/* Write Ready Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+    int               fd;
+} tBTA_FS_CI_WRITE_EVT;
+
+/* Get Directory Entry Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+} tBTA_FS_CI_GETDIR_EVT;
+
+/* Resume Information Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+    BD_ADDR_PTR       p_addr;
+    UINT8             *p_sess_info;
+    UINT32            timeout;
+    UINT32            offset;
+    UINT8             ssn;
+    UINT8             info;
+} tBTA_FS_CI_RESUME_EVT;
+
+/* Action Complete Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_FS_CO_STATUS status;
+} tBTA_FS_CI_ACTION_EVT;
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_write
+**
+** Description      This function sends an event to BTA indicating the phone
+**                  has written the number of bytes specified in the call-out
+**                  function, bta_fs_co_write(), and is ready for more data.
+**                  This function is used to control the TX data flow.
+**                  Note: The data buffer is released by the stack aioer
+**                        calling this function.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK, BTA_FS_CO_NOSPACE, or BTA_FS_CO_FAIL
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_write(int fd, tBTA_FS_CO_STATUS status, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_read
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  read in the requested amount of data specified in the
+**                  bta_fs_co_read() call-out function.  It should only be called
+**                  when the requested number of bytes has been read in, or aioer
+**                  the end of the file has been detected.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  num_bytes_read - number of bytes read into the buffer
+**                      specified in the read callout-function.
+**                  status - BTA_FS_CO_OK if full buffer of data,
+**                           BTA_FS_CO_EOF if the end of file has been reached,
+**                           BTA_FS_CO_FAIL if an error has occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_read(int fd, UINT16 num_bytes_read,
+                                   tBTA_FS_CO_STATUS status, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_open
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  finished opening a file for reading or writing.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK if file was opened in mode specified
+**                                          in the call-out function.
+**                           BTA_FS_CO_EACCES if the file exists, but contains
+**                                          the wrong access permissions.
+**                           BTA_FS_CO_FAIL if any other error has occurred.
+**                  file_size - The total size of the file
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_open(int fd, tBTA_FS_CO_STATUS status,
+                                   UINT32 file_size, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_direntry
+**
+** Description      This function is called in response to the
+**                  bta_fs_co_getdirentry call-out function.
+**
+** Parameters       status - BTA_FS_CO_OK if p_entry points to a valid entry.
+**                           BTA_FS_CO_EODIR if no more entries (p_entry is ignored).
+**                           BTA_FS_CO_FAIL if any errors have occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_direntry(tBTA_FS_CO_STATUS status, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_resume
+**
+** Description      This function is called in response to the
+**                  bta_fs_co_resume call-out function.
+**
+** Parameters       p_sess_info - the stored session ID and related information.
+**                  ssn     - the stored session sequence number.
+**                  info    - the stored BTA specific information (like last active operation).
+**                  status  - BTA_FS_CO_OK if p_entry points to a valid entry.
+**                            BTA_FS_CO_FAIL if any errors have occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_resume (BD_ADDR_PTR p_addr, UINT8 *p_sess_info,
+                                      UINT32 timeout, UINT32 offset, UINT8 ssn, UINT8 info,
+                                      tBTA_FS_CO_STATUS status, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_action
+**
+** Description      This function is called in response to one of the action
+**                  call-out functions: bta_fs_co_copy, bta_fs_co_rename or
+**                  bta_fs_co_set_perms.
+**
+** Parameters       status  - BTA_FS_CO_OK if the action is succession.
+**                            BTA_FS_CO_FAIL if any errors have occurred.
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_action(tBTA_FS_CO_STATUS status, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function         bta_fs_ci_resume_op
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  finished opening a file for reading or writing on resume.
+**
+** Parameters       fd - file descriptor passed to the stack in the
+**                       bta_fs_ci_open call-in function.
+**                  status - BTA_FS_CO_OK if file was opened in mode specified
+**                                          in the call-out function.
+**                           BTA_FS_CO_EACCES if the file exists, but contains
+**                                          the wrong access permissions.
+**                           BTA_FS_CO_FAIL if any other error has occurred.
+**                  p_file - The file name associated with fd
+**                  file_size - The total size of the file
+**                  evt - Used Internally by BTA -> MUST be same value passed
+**                       in call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_ci_resume_op(int fd, tBTA_FS_CO_STATUS status, const char *p_file,
+                                        UINT32 file_size, UINT16 evt);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_FS_CI_H */
+
diff --git a/bta/include/bta_fs_co.h b/bta/include/bta_fs_co.h
new file mode 100644
index 0000000..7ab16fa
--- /dev/null
+++ b/bta/include/bta_fs_co.h
@@ -0,0 +1,703 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for the synchronization server call-out
+ *  functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_FS_CO_H
+#define BTA_FS_CO_H
+
+#include <time.h>
+
+#include "bta_api.h"
+#include "goep_fs.h"
+#include "obx_api.h"
+
+/*****************************************************************************
+**  Constants and Data Types
+*****************************************************************************/
+
+#ifndef BTA_FS_CO_MAX_SSN_ENTRIES
+#define BTA_FS_CO_MAX_SSN_ENTRIES   10
+#endif
+
+/* Maximum path length supported by FS_CO */
+#ifndef BTA_FS_CO_PATH_LEN
+#define BTA_FS_CO_PATH_LEN          294
+#endif
+
+#ifndef BTA_FS_CO_TEST_ROOT
+#define BTA_FS_CO_TEST_ROOT         "test_files"
+#endif
+
+#define BTA_FS_CO_TEST_TYPE_NONE    0
+#define BTA_FS_CO_TEST_TYPE_REJECT  1
+#define BTA_FS_CO_TEST_TYPE_SUSPEND 2
+
+#ifndef BTA_FS_CO_TEST_AB_END
+#define BTA_FS_CO_TEST_AB_END   BTA_FS_CO_TEST_TYPE_NONE
+#endif
+
+/**************************
+**  Common Definitions
+***************************/
+
+/* Status codes returned by call-out functions, or in call-in functions as status */
+#define BTA_FS_CO_OK            GOEP_OK
+#define BTA_FS_CO_FAIL          GOEP_FAIL   /* Used to pass all other errors */
+#define BTA_FS_CO_EACCES        GOEP_EACCES
+#define BTA_FS_CO_ENOTEMPTY     GOEP_ENOTEMPTY
+#define BTA_FS_CO_EOF           GOEP_EOF
+#define BTA_FS_CO_EODIR         GOEP_EODIR
+#define BTA_FS_CO_ENOSPACE      GOEP_ENOSPACE/* Returned in bta_fs_ci_open if no room */
+#define BTA_FS_CO_EIS_DIR       GOEP_EIS_DIR
+#define BTA_FS_CO_RESUME        GOEP_RESUME /* used in ci_open, on resume */
+#define BTA_FS_CO_NONE          GOEP_NONE /* used in ci_open, on resume (no file to resume) */
+
+typedef UINT16 tBTA_FS_CO_STATUS;
+
+/* the index to the permission flags */
+#define BTA_FS_PERM_USER    0
+#define BTA_FS_PERM_GROUP   1
+#define BTA_FS_PERM_OTHER   2
+/* max number of the permission flags */
+#define BTA_FS_PERM_SIZE    3
+
+/* Flags passed to the open function (bta_fs_co_open)
+**      Values are OR'd together. (First 3 are
+**      mutually exclusive.
+*/
+#define BTA_FS_O_RDONLY         GOEP_O_RDONLY
+#define BTA_FS_O_WRONLY         GOEP_O_WRONLY
+#define BTA_FS_O_RDWR           GOEP_O_RDWR
+
+#define BTA_FS_O_CREAT          GOEP_O_CREAT
+#define BTA_FS_O_EXCL           GOEP_O_EXCL
+#define BTA_FS_O_TRUNC          GOEP_O_TRUNC
+
+#define BTA_FS_O_MODE_MASK(x)      (((UINT16)(x)) & 0x0003)
+
+/* Origin for the bta_fs_co_seek function  */
+#define BTA_FS_SEEK_SET         GOEP_SEEK_SET
+#define BTA_FS_SEEK_CUR         GOEP_SEEK_CUR
+#define BTA_FS_SEEK_END         GOEP_SEEK_END
+
+/* mode field in bta_fs_co_access callout */
+#define BTA_FS_ACC_EXIST        GOEP_ACC_EXIST
+#define BTA_FS_ACC_READ         GOEP_ACC_READ
+#define BTA_FS_ACC_RDWR         GOEP_ACC_RDWR
+
+#define BTA_FS_LEN_UNKNOWN      GOEP_LEN_UNKNOWN
+#define BTA_FS_INVALID_FD       GOEP_INVALID_FD
+#define BTA_FS_INVALID_APP_ID   (0xFF)  /* this app_id is reserved */
+
+/* mode field in tBTA_FS_DIRENTRY (OR'd together) */
+#define BTA_FS_A_RDONLY         GOEP_A_RDONLY
+#define BTA_FS_A_DIR            GOEP_A_DIR      /* Entry is a sub directory */
+
+#define BTA_FS_CTIME_LEN        GOEP_CTIME_LEN  /* Creation time "yyyymmddTHHMMSSZ" */
+
+/* Return structure type for a directory entry */
+typedef struct
+{
+    UINT32  refdata;            /* holder for OS specific data used to get next entry */
+    UINT32  filesize;
+    char    crtime[BTA_FS_CTIME_LEN]; /* "yyyymmddTHHMMSSZ", or "" if none */
+    char    *p_name;            /* Contains the addr of memory to copy name into */
+    UINT8   mode;               /* BTA_FS_A_RDONLY and/or BTA_FS_A_DIR */
+} tBTA_FS_DIRENTRY;
+
+/* session state */
+enum
+{
+    BTA_FS_CO_SESS_ST_NONE,
+    BTA_FS_CO_SESS_ST_ACTIVE,
+    BTA_FS_CO_SESS_ST_SUSPEND,
+    BTA_FS_CO_SESS_ST_RESUMING
+};
+typedef UINT8   tBTA_FS_CO_SESS_ST;
+
+
+
+/* a data type to keep an array of ssn/file offset - the info can be saved to NV */
+typedef struct
+{
+    char        path[BTA_FS_CO_PATH_LEN + 1];   /* the "current path". path[0]==0-> root */
+    char        file[BTA_FS_CO_PATH_LEN + 1];   /* file[0] !=0 on resume -> the previous suspended session had opened files */
+    int         oflags;  /* the flag to open the file */
+    BD_ADDR     bd_addr;
+    UINT8       sess_info[OBX_SESSION_INFO_SIZE];
+    UINT32      offset;         /* last file offset */
+    UINT32      timeout;        /* the timeout value on suspend */
+    time_t      suspend_time;   /* the time of suspend */
+    UINT16      nbytes;         /* number of bytes for last read/write */
+    UINT8       ssn;
+    UINT8       info;           /* info for BTA on the client side */
+    UINT8       app_id;
+    tBTA_FS_CO_SESS_ST  sess_st;
+} tBTA_FS_CO_SESSION;
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+/**************************
+**  Common Functions
+***************************/
+/*******************************************************************************
+**
+** Function         bta_fs_co_init
+**
+** Description      This function is executed as a part of the start up sequence
+**                  to make sure the control block is initialized.
+**
+** Parameters       void.
+**
+** Returns          void
+**
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_init(void);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_open
+**
+** Description      This function is executed by BTA when a file is opened.
+**                  The phone uses this function to open
+**                  a file for reading or writing.
+**
+** Parameters       p_path  - Fully qualified path and file name.
+**                  oflags  - permissions and mode (see constants above)
+**                  size    - size of file to put (0 if unavailable or not applicable)
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, a file descriptor (int),
+**                        if successful, and an error code (tBTA_FS_CO_STATUS)
+**                        are returned in the call-in function, bta_fs_ci_open().
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_open(const char *p_path, int oflags, UINT32 size,
+                           UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_session_info
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  established (p_sess_info != NULL) or ended (p_sess_info == NULL).
+**
+** Parameters       bd_addr     - the peer address
+**                  p_sess_info - the session ID and related information.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_session_info(BD_ADDR bd_addr, UINT8 *p_sess_info, UINT8 ssn,
+                                           tBTA_FS_CO_SESS_ST new_st, char *p_path, UINT8 *p_info, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_resume_op
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  resumed and there was an interrupted operation.
+**
+** Parameters       offset  - the session ID and related information.
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_resume_op(UINT32 offset, UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_suspend
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  suspended.
+**
+** Parameters       bd_addr - the peer address
+**                  ssn     - the session sequence number.
+**                  info    - the BTA specific information (like last active operation).
+**                  p_offset- the location to receive object offset of the suspended session
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_suspend(BD_ADDR bd_addr, UINT8 *p_sess_info, UINT8 ssn,
+                                      UINT32 *p_timeout, UINT32 *p_offset, UINT8 info, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_resume
+**
+** Description      This function is executed by BTA when resuming a session.
+**                  This is used to retrieve the session ID and related information
+**
+** Parameters       evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, the related session information,
+**                        if successful, and an error code (tBTA_FS_CO_STATUS)
+**                        are returned in the call-in function, bta_fs_ci_resume().
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_resume(UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_sess_ssn
+**
+** Description      This function is executed by BTA when resuming a session.
+**                  This is used to inform call-out module if the ssn/file offset
+**                  needs to be adjusted.
+**
+** Parameters       ssn     - the session sequence number of the first request
+**                            after resume.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_sess_ssn(int fd, UINT8 ssn, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_setdir
+**
+** Description      This function is executed by BTA when the server changes the
+**                  local path
+**
+** Parameters       p_path  - the new path.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_setdir(const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_close
+**
+** Description      This function is called by BTA when a connection to a
+**                  client is closed.
+**
+** Parameters       fd      - file descriptor of file to close.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful],
+**                      [BTA_FS_CO_FAIL if failed  ]
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_STATUS bta_fs_co_close(int fd, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_read
+**
+** Description      This function is called by BTA to read in data from the
+**                  previously opened file on the phone.
+**
+** Parameters       fd      - file descriptor of file to read from.
+**                  p_buf   - buffer to read the data into.
+**                  nbytes  - number of bytes to read into the buffer.
+**                  evt     - event that must be passed into the call-in function.
+**                  ssn     - session sequence number. Ignored, if bta_fs_co_open
+**							  was not called with BTA_FS_CO_RELIABLE.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, bta_fs_ci_read() is
+**                        called with the buffer of data, along with the number
+**                        of bytes read into the buffer, and a status.  The
+**                        call-in function should only be called when ALL requested
+**                        bytes have been read, the end of file has been detected,
+**                        or an error has occurred.
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_read(int fd, UINT8 *p_buf, UINT16 nbytes, UINT16 evt,
+                           UINT8 ssn, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_write
+**
+** Description      This function is called by io to send file data to the
+**                  phone.
+**
+** Parameters       fd      - file descriptor of file to write to.
+**                  p_buf   - buffer to read the data from.
+**                  nbytes  - number of bytes to write out to the file.
+**                  evt     - event that must be passed into the call-in function.
+**                  ssn     - session sequence number. Ignored, if bta_fs_co_open
+**							  was not called with BTA_FS_CO_RELIABLE.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, bta_fs_ci_write() is
+**                        called with the file descriptor and the status.  The
+**                        call-in function should only be called when ALL requested
+**                        bytes have been written, or an error has been detected,
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_write(int fd, const UINT8 *p_buf, UINT16 nbytes, UINT16 evt,
+                            UINT8 ssn, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_seek
+**
+** Description      This function is called by io to move the file pointer
+**                  of a previously opened file to the specified location for
+**                  the next read or write operation.
+**
+** Parameters       fd      - file descriptor of file.
+**                  offset  - Number of bytes from origin.
+**                  origin  - Initial position: BTA_FS_SEEK_SET, BTA_FS_SEEK_CUR,
+**                            or BTA_FS_SEEK_END.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_seek (int fd, INT32 offset, INT16 origin, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_access
+**
+** Description      This function is called to check the existence of a file or
+**                  directory.
+**
+** Parameters       p_path   - (input) file or directory to access (fully qualified path).
+**                  mode     - (input) [BTA_FS_ACC_EXIST, BTA_FS_ACC_READ, or BTA_FS_ACC_RDWR]
+**                  p_is_dir - (output) returns TRUE if p_path specifies a directory.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                   [BTA_FS_CO_OK if it exists]
+**                   [BTA_FS_CO_EACCES if permissions are wrong]
+**                   [BTA_FS_CO_FAIL if it does not exist]
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_STATUS bta_fs_co_access(const char *p_path, int mode,
+                                          BOOLEAN *p_is_dir, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_mkdir
+**
+** Description      This function is called to create a directory with
+**                  the pathname given by path. The pathname is a null terminated
+**                  string. All components of the path must already exist.
+**
+** Parameters       p_path   - (input) name of directory to create (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                  [BTA_FS_CO_OK if successful]
+**                  [BTA_FS_CO_FAIL if unsuccessful]
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_STATUS bta_fs_co_mkdir(const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_rmdir
+**
+** Description      This function is called to remove a directory whose
+**                  name is given by path. The directory must be empty.
+**
+** Parameters       p_path   - (input) name of directory to remove (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if read-only]
+**                      [BTA_FS_CO_ENOTEMPTY if directory is not empty]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_STATUS bta_fs_co_rmdir(const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_unlink
+**
+** Description      This function is called by to remove a file whose name
+**                  is given by p_path.
+**
+** Parameters       p_path   - (input) name of file to remove (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if read-only]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_STATUS bta_fs_co_unlink(const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_getdirentry
+**
+** Description      This function is called to retrieve a directory entry for the
+**                  specified path.  The first/next directory should be filled
+**                  into the location specified by p_entry.
+**
+** Parameters       p_path      - directory to search (Fully qualified path)
+**                  first_item  - TRUE if first search, FALSE if next search
+**                                      (p_cur contains previous)
+**                  p_entry (input/output) - Points to last entry data (valid when
+**                                           first_item is FALSE)
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, the status is passed
+**                        in the bta_fs_ci_direntry() call-in function.
+**                        BTA_FS_CO_OK is returned when p_entry is valid,
+**                        BTA_FS_CO_EODIR is returned when no more entries [finished]
+**                        BTA_FS_CO_FAIL is returned if an error occurred
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_getdirentry(const char *p_path, BOOLEAN first_item,
+                                   tBTA_FS_DIRENTRY *p_entry, UINT16 evt,
+                                   UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_copy
+**
+** Description      This function is called to copy a file/directory whose
+**                  name is given by p_src_path to p_dest_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to be copied (fully qualified path).
+**                  p_dest_path - (input) new name of file/directory(fully qualified path).
+**                  p_perms     - the permission of the new object.
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EIS_DIR if p_src_path is a folder]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_copy(const char *p_src_path, const char *p_dest_path, UINT8 *p_perms, UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_rename
+**
+** Description      This function is called to move a file/directory whose
+**                  name is given by p_src_path to p_dest_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to be moved (fully qualified path).
+**                  p_dest_path - (input) new name of file/directory(fully qualified path).
+**                  p_perms     - the permission of the new object.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_rename(const char *p_src_path, const char *p_dest_path, UINT8 *p_perms, UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_set_perms
+**
+** Description      This function is called to set the permission a file/directory
+**                  with name as p_src_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to set permission (fully qualified path).
+**                  p_perms     - the permission .
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_set_perms(const char *p_src_path,  UINT8 *p_perms, UINT16 evt, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_sess_fopen
+**
+** Description      This function is called by bta_fs_co_open to keep track of
+**                  the opened file (for reliable session suspend/resume.)
+**
+** Parameters       p_path  - Fully qualified path and file name.
+**                  oflags  - permissions and mode (see constants above)
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_sess_fopen(const char *p_path, int oflags, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_sess_fclose
+**
+** Description      This function is called by bta_fs_co_close
+**
+** Parameters       app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_sess_fclose(UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_sess_offset
+**
+** Description      This function is called by bta_fs_co_write to keep track of
+**                  the last file offset (Only the receiving side needs to keep
+**                  track of the file offset)
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_sess_offset(UINT8 ssn, INT32 pos, UINT16 nbytes, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_suspended_addr
+**
+** Description      find the peer address of the suspended session control block
+**                  for the given an app_id.
+**
+** Returns          the control block found.
+**
+*******************************************************************************/
+BTA_API extern UINT8 *bta_fs_co_suspended_addr(UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_num_suspended_session
+**
+** Description      find the number of suspended session control blocks for the
+**                  given an app_id.
+**
+** Returns          the number of control blocks found.
+**
+*******************************************************************************/
+BTA_API extern UINT8 bta_fs_co_num_suspended_session(UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_get_active_session
+**
+** Description      find the active session control block for the given an app_id.
+**
+** Returns          the control block found.
+**
+*******************************************************************************/
+BTA_API extern tBTA_FS_CO_SESSION *bta_fs_co_get_active_session(UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_init_db
+**
+** Description      Initialize the session control blocks for platform.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_fs_co_init_db (tBTA_FS_CO_SESSION *p_first);
+
+/*******************************************************************************
+**
+** Function         bta_fs_convert_oflags
+**
+** Description      This function converts the open flags from BTA into MFS.
+**
+** Returns          BTA FS status value.
+**
+*******************************************************************************/
+BTA_API extern int bta_fs_convert_bta_oflags(int bta_oflags);
+
+#endif /* BTA_FS_CO_H */
diff --git a/bta/include/bta_gatt_api.h b/bta/include/bta_gatt_api.h
new file mode 100644
index 0000000..0404847
--- /dev/null
+++ b/bta/include/bta_gatt_api.h
@@ -0,0 +1,1219 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for BTA GATT.
+ *
+ ******************************************************************************/
+#ifndef BTA_GATT_API_H
+#define BTA_GATT_API_H
+
+#include "bta_api.h"
+#include "gatt_api.h"
+
+#ifndef     BTA_GATT_INCLUDED
+#define     BTA_GATT_INCLUDED     FALSE
+#endif
+
+
+#if ((BLE_INCLUDED == FALSE) && (BTA_GATT_INCLUDED == TRUE))
+#undef BTA_GATT_INCLUDED
+#define BTA_GATT_INCLUDED        FALSE
+#endif
+
+
+#ifndef     BTA_GATT_DEBUG
+#define     BTA_GATT_DEBUG       FALSE
+#endif
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/**************************
+**  Common Definitions
+***************************/
+/* GATT ID */
+typedef struct
+{
+    tBT_UUID    uuid;           /* uuid of the attribute */
+    UINT8       inst_id;        /* instance ID */
+} tBTA_GATT_ID;
+
+/* Success code and error codes */
+#define  BTA_GATT_OK                        GATT_SUCCESS
+#define  BTA_GATT_INVALID_HANDLE            GATT_INVALID_HANDLE                /* 0x0001 */
+#define  BTA_GATT_READ_NOT_PERMIT           GATT_READ_NOT_PERMIT               /* 0x0002 */
+#define  BTA_GATT_WRITE_NOT_PERMIT          GATT_WRITE_NOT_PERMIT              /* 0x0003 */
+#define  BTA_GATT_INVALID_PDU               GATT_INVALID_PDU                   /* 0x0004 */
+#define  BTA_GATT_INSUF_AUTHENTICATION      GATT_INSUF_AUTHENTICATION          /* 0x0005 */
+#define  BTA_GATT_REQ_NOT_SUPPORTED         GATT_REQ_NOT_SUPPORTED             /* 0x0006 */
+#define  BTA_GATT_INVALID_OFFSET            GATT_INVALID_OFFSET                /* 0x0007 */
+#define  BTA_GATT_INSUF_AUTHORIZATION       GATT_INSUF_AUTHORIZATION           /* 0x0008 */
+#define  BTA_GATT_PREPARE_Q_FULL            GATT_PREPARE_Q_FULL                /* 0x0009 */
+#define  BTA_GATT_NOT_FOUND                 GATT_NOT_FOUND                     /* 0x000a */
+#define  BTA_GATT_NOT_LONG                  GATT_NOT_LONG                      /* 0x000b */
+#define  BTA_GATT_INSUF_KEY_SIZE            GATT_INSUF_KEY_SIZE                /* 0x000c */
+#define  BTA_GATT_INVALID_ATTR_LEN          GATT_INVALID_ATTR_LEN              /* 0x000d */
+#define  BTA_GATT_ERR_UNLIKELY              GATT_ERR_UNLIKELY                  /* 0x000e */
+#define  BTA_GATT_INSUF_ENCRYPTION          GATT_INSUF_ENCRYPTION              /* 0x000f */
+#define  BTA_GATT_UNSUPPORT_GRP_TYPE        GATT_UNSUPPORT_GRP_TYPE            /* 0x0010 */
+#define  BTA_GATT_INSUF_RESOURCE            GATT_INSUF_RESOURCE                /* 0x0011 */
+
+
+#define  BTA_GATT_ILLEGAL_PARAMETER         GATT_ILLEGAL_PARAMETER             /* 0x0087 */
+#define  BTA_GATT_NO_RESOURCES              GATT_NO_RESOURCES                  /* 0x0080 */
+#define  BTA_GATT_INTERNAL_ERROR            GATT_INTERNAL_ERROR                /* 0x0081 */
+#define  BTA_GATT_WRONG_STATE               GATT_WRONG_STATE                   /* 0x0082 */
+#define  BTA_GATT_DB_FULL                   GATT_DB_FULL                       /* 0x0083 */
+#define  BTA_GATT_BUSY                      GATT_BUSY                          /* 0x0084 */
+#define  BTA_GATT_ERROR                     GATT_ERROR                         /* 0x0085 */
+#define  BTA_GATT_CMD_STARTED               GATT_CMD_STARTED                   /* 0x0086 */
+#define  BTA_GATT_PENDING                   GATT_PENDING                       /* 0x0088 */
+#define  BTA_GATT_AUTH_FAIL                 GATT_AUTH_FAIL                     /* 0x0089 */
+#define  BTA_GATT_MORE                      GATT_MORE                          /* 0x008a */
+#define  BTA_GATT_INVALID_CFG               GATT_INVALID_CFG                   /* 0x008b */
+#define  BTA_GATT_DUP_REG                   0x008c
+#define  BTA_GATT_ALREADY_OPEN              0x008d                              /* 0x008d */
+typedef UINT8 tBTA_GATT_STATUS;
+
+#define BTA_GATT_INVALID_CONN_ID   GATT_INVALID_CONN_ID
+
+
+/* Client callback function events */
+#define BTA_GATTC_REG_EVT           0   /* GATT client is registered. */
+#define BTA_GATTC_DEREG_EVT         1   /* GATT client deregistered event */
+#define BTA_GATTC_OPEN_EVT          2   /* GATTC open request status  event */
+#define BTA_GATTC_READ_CHAR_EVT     3   /* GATT read characteristic event */
+#define BTA_GATTC_WRITE_CHAR_EVT    4   /* GATT write characteristic or char descriptor event */
+#define BTA_GATTC_CLOSE_EVT         5   /* GATTC  close request status event */
+#define BTA_GATTC_SEARCH_CMPL_EVT   6   /* GATT discovery complete event */
+#define BTA_GATTC_SEARCH_RES_EVT    7   /* GATT discovery result event */
+#define BTA_GATTC_READ_DESCR_EVT    8   /* GATT read characterisitc descriptor event */
+#define BTA_GATTC_WRITE_DESCR_EVT   9   /* GATT write characteristic descriptor event */
+#define BTA_GATTC_NOTIF_EVT         10  /* GATT attribute notification event */
+#define BTA_GATTC_PREP_WRITE_EVT    11  /* GATT prepare write  event */
+#define BTA_GATTC_EXEC_EVT          12  /* execute write complete event */
+#define BTA_GATTC_ACL_EVT           13  /* ACL up event */
+#define BTA_GATTC_CANCEL_OPEN_EVT   14   /*  cancel open event */
+#define BTA_GATTC_SRVC_CHG_EVT      15  /* service change event */
+typedef UINT8 tBTA_GATTC_EVT;
+
+typedef tGATT_IF tBTA_GATTC_IF;
+
+typedef struct
+{
+    UINT16              unit;       /* as UUIUD defined by SIG */
+    UINT16              descr;       /* as UUID as defined by SIG */
+    tGATT_FORMAT        format;
+    INT8                exp;
+    UINT8               name_spc;   /* The name space of the description */
+}tBTA_GATT_CHAR_PRES;
+
+#define BTA_GATT_CLT_CONFIG_NONE               GATT_CLT_CONFIG_NONE         /* 0x0000    */
+#define BTA_GATT_CLT_CONFIG_NOTIFICATION       GATT_CLT_CONFIG_NOTIFICATION /* 0x0001 */
+#define BTA_GATT_CLT_CONFIG_INDICATION         GATT_CLT_CONFIG_INDICATION   /* 0x0002 */
+typedef UINT16  tBTA_GATT_CLT_CHAR_CONFIG;
+
+/* characteristic descriptor: server configuration value
+*/
+#define BTA_GATT_SVR_CONFIG_NONE            GATT_SVR_CONFIG_NONE            /* 0x0000 */
+#define BTA_GATT_SVR_CONFIG_BROADCAST       GATT_SVR_CONFIG_BROADCAST       /*  0x0001 */
+typedef UINT16  tBTA_GATT_SVR_CHAR_CONFIG;
+
+/* Characteristic Aggregate Format attribute value
+*/
+#define BTA_GATT_AGGR_HANDLE_NUM_MAX        10
+typedef struct
+{
+    UINT8                   num_handle;
+    UINT16                  handle_list[BTA_GATT_AGGR_HANDLE_NUM_MAX];
+} tBTA_GATT_CHAR_AGGRE;
+typedef tGATT_VALID_RANGE           tBTA_GATT_VALID_RANGE;
+
+typedef struct
+{
+    UINT16  len;
+    UINT8   *p_value;
+}tBTA_GATT_UNFMT;
+
+#define BTA_GATT_MAX_ATTR_LEN       GATT_MAX_ATTR_LEN
+
+#define BTA_GATTC_TYPE_WRITE             GATT_WRITE
+#define BTA_GATTC_TYPE_WRITE_NO_RSP      GATT_WRITE_NO_RSP
+typedef UINT8 tBTA_GATTC_WRITE_TYPE;
+
+#define BTA_GATT_CONN_UNKNOWN                   0
+#define BTA_GATT_CONN_NO_RESOURCES              GATT_CONN_NO_RESOURCES        /* connection fail for l2cap resource failure */
+#define BTA_GATT_CONN_TIMEOUT                   GATT_CONN_TIMEOUT             /* 0x08 connection timeout  */
+#define BTA_GATT_CONN_TERMINATE_PEER_USER       GATT_CONN_TERMINATE_PEER_USER /* 0x13 connection terminate by peer user  */
+#define BTA_GATT_CONN_TERMINATE_LOCAL_HOST      GATT_CONN_TERMINATE_LOCAL_HOST/* 0x16 connectionterminated by local host  */
+#define BTA_GATT_CONN_FAIL_ESTABLISH            GATT_CONN_FAIL_ESTABLISH      /* 0x03E connection fail to establish  */
+#define BTA_GATT_CONN_LMP_TIMEOUT               GATT_CONN_LMP_TIMEOUT          /* 0x22 connection fail for LMP response tout */
+#define BTA_GATT_CONN_CANCEL                    GATT_CONN_CANCEL               /* 0x0100 L2CAP connection cancelled  */
+#define BTA_GATT_CONN_NONE                      0x0101                          /* 0x0101 no connection to cancel  */
+typedef UINT16 tBTA_GATT_REASON;
+
+typedef struct
+{
+    tBTA_GATT_ID        id;
+    BOOLEAN             is_primary;
+}tBTA_GATT_SRVC_ID;
+
+typedef struct
+{
+    tBTA_GATT_SRVC_ID       srvc_id;
+    tBTA_GATT_ID            char_id;
+}tBTA_GATTC_CHAR_ID;
+
+typedef struct
+{
+    tBTA_GATTC_CHAR_ID      char_id;
+    tBT_UUID                descr_type;
+}tBTA_GATTC_CHAR_DESCR_ID;
+
+typedef struct
+{
+    tBTA_GATT_SRVC_ID       srvc_id;
+    tBTA_GATT_SRVC_ID       incl_svc_id;
+}tBTA_GATTC_INCL_SVC_ID;
+
+#define     BTA_GATT_TYPE_CHAR          0
+#define     BTA_GATT_TYPE_CHAR_DESCR    1
+typedef UINT8 tBTA_GATT_ID_TYPE;
+
+typedef struct
+{
+    tBTA_GATT_ID_TYPE               id_type;
+    union
+    {
+        tBTA_GATTC_CHAR_ID         char_id;
+        tBTA_GATTC_CHAR_DESCR_ID   char_descr_id;
+
+    }                       id_value;
+}tBTA_GATTC_ATTR_ID;
+
+#define BTA_GATTC_MULTI_MAX    GATT_MAX_READ_MULTI_HANDLES
+
+typedef struct
+{
+    UINT8                       num_attr;
+    tBTA_GATTC_ATTR_ID          id_list[BTA_GATTC_MULTI_MAX];
+
+}tBTA_GATTC_MULTI;
+
+#define BTA_GATT_AUTH_REQ_NONE           GATT_AUTH_REQ_NONE
+#define BTA_GATT_AUTH_REQ_NO_MITM        GATT_AUTH_REQ_NO_MITM            /* unauthenticated encryption */
+#define BTA_GATT_AUTH_REQ_MITM           GATT_AUTH_REQ_MITM               /* authenticated encryption */
+#define BTA_GATT_AUTH_REQ_SIGNED_NO_MITM GATT_AUTH_REQ_SIGNED_NO_MITM
+#define BTA_GATT_AUTH_REQ_SIGNED_MITM    GATT_AUTH_REQ_SIGNED_MITM
+
+typedef tGATT_AUTH_REQ tBTA_GATT_AUTH_REQ;
+
+enum
+{
+    BTA_GATTC_ATTR_TYPE_INCL_SRVC,
+    BTA_GATTC_ATTR_TYPE_CHAR,
+    BTA_GATTC_ATTR_TYPE_CHAR_DESCR,
+    BTA_GATTC_ATTR_TYPE_SRVC
+};
+typedef UINT8 tBTA_GATTC_ATTR_TYPE;
+
+
+typedef struct
+{
+    tBT_UUID    uuid;
+    UINT16      s_handle;
+    UINT16      e_handle;   /* used for service only */
+    UINT8       attr_type;
+    UINT8       id;
+    UINT8       prop;       /* used when attribute type is characteristic */
+    BOOLEAN     is_primary; /* used when attribute type is service */
+}tBTA_GATTC_NV_ATTR;
+
+/* callback data structure */
+typedef struct
+{
+    tBTA_GATT_STATUS    status;
+    tBTA_GATTC_IF       client_if;
+// btla-specific ++
+    tBT_UUID            app_uuid;
+// btla-specific --
+}tBTA_GATTC_REG;
+
+typedef struct
+{
+    UINT8                       num_pres_fmt;   /* number of presentation format aggregated*/
+    tBTA_GATTC_CHAR_DESCR_ID    pre_format[BTA_GATTC_MULTI_MAX];
+}tBTA_GATT_CHAR_AGGRE_VALUE;
+
+typedef union
+{
+    tBTA_GATT_CHAR_AGGRE_VALUE      aggre_value;
+    tBTA_GATT_UNFMT                 unformat;
+
+}tBTA_GATT_READ_VAL;
+
+typedef struct
+{
+    UINT16              conn_id;
+    tBTA_GATT_STATUS    status;
+    tBTA_GATT_SRVC_ID   srvc_id;
+    tBTA_GATT_ID        char_id;
+    tBT_UUID            descr_type;
+    tBTA_GATT_READ_VAL  *p_value;
+}tBTA_GATTC_READ;
+
+typedef struct
+{
+    UINT16              conn_id;
+    tBTA_GATT_STATUS    status;
+    tBTA_GATT_SRVC_ID   srvc_id;
+    tBTA_GATT_ID        char_id;
+    tBT_UUID            descr_type;
+}tBTA_GATTC_WRITE;
+
+typedef struct
+{
+    UINT16              conn_id;
+    tBTA_GATT_STATUS    status;
+}tBTA_GATTC_EXEC_CMPL;
+
+typedef struct
+{
+    UINT16              conn_id;
+    tBTA_GATT_STATUS    status;
+}tBTA_GATTC_SEARCH_CMPL;
+
+typedef struct
+{
+    UINT16              conn_id;
+    tBTA_GATT_SRVC_ID   service_uuid;
+}tBTA_GATTC_SRVC_RES;
+
+
+typedef struct
+{
+    tBTA_GATT_STATUS    status;
+    UINT16              conn_id;
+    tBTA_GATTC_IF       client_if;
+    BD_ADDR             remote_bda;
+}tBTA_GATTC_OPEN;
+
+typedef struct
+{
+    tBTA_GATT_STATUS    status;
+    UINT16              conn_id;
+    tBTA_GATTC_IF       client_if;
+    BD_ADDR             remote_bda;
+    tBTA_GATT_REASON    reason;         /* disconnect reason code, not useful when connect event is reported */
+}tBTA_GATTC_CLOSE;
+
+typedef struct
+{
+    UINT16              conn_id;
+    BD_ADDR             bda;
+    tBTA_GATTC_CHAR_ID  char_id;
+    tBT_UUID            descr_type;
+    UINT16              len;
+    UINT8               value[BTA_GATT_MAX_ATTR_LEN];
+    BOOLEAN             is_notify;
+}tBTA_GATTC_NOTIFY;
+
+// btla-specific ++
+typedef struct
+{
+    tBTA_GATT_STATUS        status;
+    tBTA_GATTC_IF           client_if;
+    UINT16                  conn_id;
+    BD_ADDR                 remote_bda;
+}tBTA_GATTC_OPEN_CLOSE;
+// btla-specific --
+
+typedef union
+{
+    tBTA_GATT_STATUS        status;
+
+    tBTA_GATTC_SEARCH_CMPL  search_cmpl;          /* discovery complete */
+    tBTA_GATTC_SRVC_RES     srvc_res;          /* discovery result */
+    tBTA_GATTC_REG          reg_oper;              /* registration data */
+    tBTA_GATTC_OPEN         open;
+    tBTA_GATTC_CLOSE        close;
+    tBTA_GATTC_READ         read;             /* read attribute/descriptor data */
+    tBTA_GATTC_WRITE        write;            /* write complete data */
+    tBTA_GATTC_EXEC_CMPL    exec_cmpl;       /*  execute complete */
+    tBTA_GATTC_NOTIFY       notify;           /* notification/indication event data */
+    BD_ADDR                 remote_bda;     /* service change event */
+} tBTA_GATTC;
+
+/* Client callback function */
+typedef void (tBTA_GATTC_CBACK)(tBTA_GATTC_EVT event, tBTA_GATTC *p_data);
+
+
+/* GATT Server Data Structure */
+/* Server callback function events */
+#define BTA_GATTS_REG_EVT                               0
+#define BTA_GATTS_READ_EVT                              GATTS_REQ_TYPE_READ         /* 1 */
+#define BTA_GATTS_WRITE_EVT                             GATTS_REQ_TYPE_WRITE        /* 2 */
+#define BTA_GATTS_EXEC_WRITE_EVT                        GATTS_REQ_TYPE_WRITE_EXEC   /* 3 */
+#define BTA_GATTS_MTU_EVT                               GATTS_REQ_TYPE_MTU          /* 4 */
+#define BTA_GATTS_CONF_EVT                              GATTS_REQ_TYPE_CONF         /* 5 */
+#define BTA_GATTS_DEREG_EVT                             6
+#define BTA_GATTS_CREATE_EVT                            7
+#define BTA_GATTS_ADD_INCL_SRVC_EVT                     8
+#define BTA_GATTS_ADD_CHAR_EVT                          9
+#define BTA_GATTS_ADD_CHAR_DESCR_EVT                    10
+#define BTA_GATTS_DELELTE_EVT                           11
+#define BTA_GATTS_START_EVT                             12
+#define BTA_GATTS_STOP_EVT                              13
+#define BTA_GATTS_CONNECT_EVT                           14
+#define BTA_GATTS_DISCONNECT_EVT                        15
+#define BTA_GATTS_OPEN_EVT                              16
+#define BTA_GATTS_CANCEL_OPEN_EVT                       17
+#define BTA_GATTS_CLOSE_EVT                             18
+
+typedef UINT8  tBTA_GATTS_EVT;
+typedef tGATT_IF tBTA_GATTS_IF;
+
+/* Attribute permissions
+*/
+#define BTA_GATT_PERM_READ              GATT_PERM_READ              /* bit 0 -  0x0001 */
+#define BTA_GATT_PERM_READ_ENCRYPTED    GATT_PERM_READ_ENCRYPTED    /* bit 1 -  0x0002 */
+#define BTA_GATT_PERM_READ_ENC_MITM     GATT_PERM_READ_ENC_MITM     /* bit 2 -  0x0004 */
+#define BTA_GATT_PERM_WRITE             GATT_PERM_WRITE             /* bit 4 -  0x0010 */
+#define BTA_GATT_PERM_WRITE_ENCRYPTED   GATT_PERM_WRITE_ENCRYPTED   /* bit 5 -  0x0020 */
+#define BTA_GATT_PERM_WRITE_ENC_MITM    GATT_PERM_WRITE_ENC_MITM    /* bit 6 -  0x0040 */
+#define BTA_GATT_PERM_WRITE_SIGNED      GATT_PERM_WRITE_SIGNED      /* bit 7 -  0x0080 */
+#define BTA_GATT_PERM_WRITE_SIGNED_MITM GATT_PERM_WRITE_SIGNED_MITM /* bit 8 -  0x0100 */
+typedef UINT16 tBTA_GATT_PERM;
+
+#define BTA_GATTS_INVALID_APP   0xff
+
+#define BTA_GATTS_INVALID_IF    0
+
+/* definition of characteristic properties */
+#define BTA_GATT_CHAR_PROP_BIT_BROADCAST    GATT_CHAR_PROP_BIT_BROADCAST    /* 0x01 */
+#define BTA_GATT_CHAR_PROP_BIT_READ         GATT_CHAR_PROP_BIT_READ    /* 0x02 */
+#define BTA_GATT_CHAR_PROP_BIT_WRITE_NR     GATT_CHAR_PROP_BIT_WRITE_NR    /* 0x04 */
+#define BTA_GATT_CHAR_PROP_BIT_WRITE        GATT_CHAR_PROP_BIT_WRITE       /* 0x08 */
+#define BTA_GATT_CHAR_PROP_BIT_NOTIFY       GATT_CHAR_PROP_BIT_NOTIFY      /* 0x10 */
+#define BTA_GATT_CHAR_PROP_BIT_INDICATE     GATT_CHAR_PROP_BIT_INDICATE    /* 0x20 */
+#define BTA_GATT_CHAR_PROP_BIT_AUTH         GATT_CHAR_PROP_BIT_AUTH        /* 0x40 */
+#define BTA_GATT_CHAR_PROP_BIT_EXT_PROP     GATT_CHAR_PROP_BIT_EXT_PROP    /* 0x80 */
+typedef UINT8 tBTA_GATT_CHAR_PROP;
+
+#ifndef BTA_GATTC_CHAR_DESCR_MAX
+#define BTA_GATTC_CHAR_DESCR_MAX        7
+#endif
+
+/***********************  NV callback Data Definitions   **********************
+*/
+typedef struct
+{
+    tBT_UUID app_uuid128;
+    tBT_UUID svc_uuid;
+    UINT16   svc_inst;
+    UINT16   s_handle;
+    UINT16   e_handle;
+    BOOLEAN  is_primary;      /* primary service or secondary */
+} tBTA_GATTS_HNDL_RANGE;
+
+#define BTA_GATTS_SRV_CHG_CMD_ADD_CLIENT       GATTS_SRV_CHG_CMD_ADD_CLIENT
+#define BTA_GATTS_SRV_CHG_CMD_UPDATE_CLIENT    GATTS_SRV_CHG_CMD_UPDATE_CLIENT
+#define BTA_GATTS_SRV_CHG_CMD_REMOVE_CLIENT    GATTS_SRV_CHG_CMD_REMOVE_CLIENT
+#define BTA_GATTS_SRV_CHG_CMD_READ_NUM_CLENTS  GATTS_SRV_CHG_CMD_READ_NUM_CLENTS
+#define BTA_GATTS_SRV_CHG_CMD_READ_CLENT       GATTS_SRV_CHG_CMD_READ_CLENT
+typedef tGATTS_SRV_CHG_CMD tBTA_GATTS_SRV_CHG_CMD;
+
+typedef tGATTS_SRV_CHG     tBTA_GATTS_SRV_CHG;
+typedef tGATTS_SRV_CHG_REQ tBTA_GATTS_SRV_CHG_REQ;
+typedef tGATTS_SRV_CHG_RSP tBTA_GATTS_SRV_CHG_RSP;
+
+enum
+{
+    BTA_GATT_TRANSPORT_LE,
+    BTA_GATT_TRANSPORT_BR_EDR,
+    BTA_GATT_TRANSPORT_LE_BR_EDR
+};
+typedef UINT8 tBTA_GATT_TRANSPORT;
+
+/* attribute value */
+typedef tGATT_VALUE tBTA_GATT_VALUE;
+
+/* attribute response data */
+typedef tGATTS_RSP tBTA_GATTS_RSP;
+
+/* attribute request data from the client */
+#define BTA_GATT_PREP_WRITE_CANCEL   0x00
+#define BTA_GATT_PREP_WRITE_EXEC     0x01
+typedef tGATT_EXEC_FLAG tBTA_GATT_EXEC_FLAG;
+
+/* read request always based on UUID */
+typedef tGATT_READ_REQ tTA_GBATT_READ_REQ;
+
+/* write request data */
+typedef tGATT_WRITE_REQ tBTA_GATT_WRITE_REQ;
+
+/* callback data for server access request from client */
+typedef tGATTS_DATA tBTA_GATTS_REQ_DATA;
+
+typedef struct
+{
+    BD_ADDR             remote_bda;
+    UINT32              trans_id;
+    UINT16              conn_id;
+    tBTA_GATTS_REQ_DATA *p_data;
+}tBTA_GATTS_REQ;
+
+typedef struct
+{
+    tBTA_GATTS_IF       server_if;
+    tBTA_GATT_STATUS    status;
+// btla-specific ++
+    tBT_UUID            uuid;
+// btla-specific --
+}tBTA_GATTS_REG_OPER;
+
+
+typedef struct
+{
+    tBTA_GATTS_IF       server_if;
+    UINT16              service_id;
+// btla-specific ++
+    UINT16              svc_instance;
+    BOOLEAN             is_primary;
+    tBTA_GATT_STATUS    status;
+    tBT_UUID            uuid;
+// btla-specific --
+}tBTA_GATTS_CREATE;
+
+typedef struct
+{
+    tBTA_GATTS_IF       server_if;
+    UINT16              service_id;
+    UINT16              attr_id;
+    tBTA_GATT_STATUS    status;
+// btla-specific ++
+    tBT_UUID            char_uuid;
+// btla-specific --
+}tBTA_GATTS_ADD_RESULT;
+
+typedef struct
+{
+    tBTA_GATTS_IF       server_if;
+    UINT16              service_id;
+    tBTA_GATT_STATUS    status;
+}tBTA_GATTS_SRVC_OPER;
+
+
+typedef struct
+{
+    tBTA_GATTS_IF       server_if;
+    BD_ADDR             remote_bda;
+    UINT16              conn_id;
+    tBTA_GATT_REASON    reason; /* report disconnect reason */
+}tBTA_GATTS_CONN;
+
+/* GATTS callback data */
+typedef union
+{
+    tBTA_GATTS_REG_OPER     reg_oper;
+    tBTA_GATTS_CREATE       create;
+    tBTA_GATTS_SRVC_OPER    srvc_oper;
+    tBTA_GATT_STATUS        status; /*  BTA_GATTS_CONF_EVT */
+    tBTA_GATTS_ADD_RESULT   add_result;  /* add included service: BTA_GATTS_ADD_INCL_SRVC_EVT
+                                           add char : BTA_GATTS_ADD_CHAR_EVT
+                                           add char descriptor: BTA_GATTS_ADD_CHAR_DESCR_EVT */
+    tBTA_GATTS_REQ          req_data;
+    tBTA_GATTS_CONN         conn;       /* BTA_GATTS_CONN_EVT */
+
+}tBTA_GATTS;
+
+
+/* Server callback function */
+typedef void (tBTA_GATTS_CBACK)(tBTA_GATTS_EVT event,  tBTA_GATTS *p_data);
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/**************************
+**  Client Functions
+***************************/
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_AppRegister
+**
+** Description      This function is called to register application callbacks
+**                    with BTA GATTC module.
+**
+** Parameters       p_app_uuid - applicaiton UUID
+**                  p_client_cb - pointer to the application callback function.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_AppRegister(tBT_UUID *p_app_uuid, tBTA_GATTC_CBACK *p_client_cb);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_AppDeregister
+**
+** Description      This function is called to deregister an application
+**                  from BTA GATTC module.
+**
+** Parameters       client_if - client interface identifier.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_AppDeregister (tBTA_GATTC_IF client_if);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_Open
+**
+** Description      Open a direct connection or add a background auto connection
+**                  bd address
+**
+** Parameters       client_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_Open(tBTA_GATTC_IF client_if, BD_ADDR remote_bda, BOOLEAN is_direct);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_CancelOpen
+**
+** Description      Open a direct connection or add a background auto connection
+**                  bd address
+**
+** Parameters       client_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_CancelOpen(tBTA_GATTC_IF client_if, BD_ADDR remote_bda, BOOLEAN is_direct);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_Close
+**
+** Description      Close a connection to a GATT server.
+**
+** Parameters       conn_id: connectino ID to be closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_Close(UINT16 conn_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ServiceSearchRequest
+**
+** Description      This function is called to request a GATT service discovery
+**                    on a GATT server. This function report service search result
+**                  by a callback event, and followed by a service search complete
+**                  event.
+**
+** Parameters       conn_id: connection ID.
+**                  p_srvc_uuid: a UUID of the service application is interested in.
+**                              If Null, discover for all services.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_ServiceSearchRequest(UINT16 conn_id, tBT_UUID *p_srvc_uuid);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstChar
+**
+** Description      This function is called to find the first charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_srvc_id: the service ID of which the characteristic is belonged to.
+**                  p_char_uuid_cond: Characteristic UUID, if NULL find the first available
+**                               characteristic.
+**                  p_char_result: output parameter which will store the GATT
+**                                  characteristic ID.
+**                  p_property: output parameter to carry the characteristic property.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetFirstChar (UINT16              conn_id,
+                                                         tBTA_GATT_SRVC_ID   *p_srvc_id,
+                                                         tBT_UUID            *p_char_uuid_cond,
+                                                         tBTA_GATTC_CHAR_ID  *p_char_result,
+                                                         tBTA_GATT_CHAR_PROP *p_property);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextChar
+**
+** Description      This function is called to find the next charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_char_id: start the characteristic search from the next record
+**                           after the one identified by char_id.
+**                  p_char_uuid_cond: Characteristic UUID, if NULL find the first available
+**                               characteristic.
+**                  p_char_result: output parameter which will store the GATT
+**                                  characteristic ID.
+**                  p_property: output parameter, characteristic property.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetNextChar (UINT16 conn_id,
+                                                        tBTA_GATTC_CHAR_ID  *p_start_char_id,
+                                                        tBT_UUID            *p_char_uuid_cond,
+                                                        tBTA_GATTC_CHAR_ID  *p_char_result,
+                                                        tBTA_GATT_CHAR_PROP *p_property);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstCharDescr
+**
+** Description      This function is called to find the first charatceristic descriptor of the
+**                  charatceristic on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_char_id: the characteristic ID of which the descriptor is belonged to.
+**                  p_descr_uuid_cond: Characteristic Descr UUID, if NULL find the first available
+**                               characteristic.
+**                  p_descr_result: output parameter which will store the GATT
+**                                  characteristic descriptor ID.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetFirstCharDescr (UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id,
+                                                tBT_UUID *p_descr_uuid_cond,
+                                                tBTA_GATTC_CHAR_DESCR_ID *p_descr_result);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextCharDescr
+**
+** Description      This function is called to find the next charatceristic of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_descr_id: start the characteristic search from the next record
+**                           after the one identified by p_start_descr_id.
+**                  p_descr_uuid_cond: Characteristic descriptor UUID, if NULL find
+**                               the first available characteristic descriptor.
+**                  p_descr_result: output parameter which will store the GATT
+**                                  characteristic descriptor ID.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetNextCharDescr (UINT16 conn_id,
+                                             tBTA_GATTC_CHAR_DESCR_ID *p_start_descr_id,
+                                             tBT_UUID           *p_descr_uuid_cond,
+                                             tBTA_GATTC_CHAR_DESCR_ID *p_descr_result);
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetFirstIncludedService
+**
+** Description      This function is called to find the first included service of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_srvc_id: the service ID of which the included service is belonged to.
+**                  p_uuid_cond: include service UUID, if NULL find the first available
+**                               included service.
+**                  p_result: output parameter which will store the GATT ID
+**                              of the included service found.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetFirstIncludedService(UINT16 conn_id,
+                                                                   tBTA_GATT_SRVC_ID    *p_srvc_id,
+                                                                   tBT_UUID               *p_uuid_cond,
+                                                                   tBTA_GATTC_INCL_SVC_ID *p_result);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_GetNextIncludedService
+**
+** Description      This function is called to find the next included service of the
+**                  service on the given server.
+**
+** Parameters       conn_id: connection ID which identify the server.
+**                  p_start_id: start the search from the next record
+**                                  after the one identified by p_start_id.
+**                  p_uuid_cond: Included service UUID, if NULL find the first available
+**                               included service.
+**                  p_result: output parameter which will store the GATT ID
+**                              of the included service found.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS  BTA_GATTC_GetNextIncludedService(UINT16 conn_id,
+                                                                  tBTA_GATTC_INCL_SVC_ID *p_start_id,
+                                                                  tBT_UUID             *p_uuid_cond,
+                                                                  tBTA_GATTC_INCL_SVC_ID *p_result);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadCharacteristic
+**
+** Description      This function is called to read a service's characteristics of
+**                    the given characteritisc ID.
+**
+** Parameters       conn_id - connectino ID.
+**                    p_char_id - characteritic ID to read.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_ReadCharacteristic (UINT16 conn_id,
+                                                  tBTA_GATTC_CHAR_ID *p_char_id,
+                                                  tBTA_GATT_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadCharDescr
+**
+** Description      This function is called to read a characteristics descriptor.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_descr_id - characteritic descriptor ID to read.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_ReadCharDescr (UINT16 conn_id,
+                                             tBTA_GATTC_CHAR_DESCR_ID *p_char_descr_id,
+                                             tBTA_GATT_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_WriteCharValue
+**
+** Description      This function is called to write characteristic value.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - characteristic ID to write.
+**                    write_type - type of write.
+**                  len: length of the data to be written.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_WriteCharValue (UINT16 conn_id,
+                                              tBTA_GATTC_CHAR_ID *p_char_id,
+                                              tBTA_GATTC_WRITE_TYPE  write_type,
+                                              UINT16 len,
+                                              UINT8 *p_value,
+                                              tBTA_GATT_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_WriteCharDescr
+**
+** Description      This function is called to write characteristic descriptor value.
+**
+** Parameters       conn_id - connection ID
+**                    p_char_descr_id - characteristic descriptor ID to write.
+**                    write_type - type of write.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_WriteCharDescr (UINT16 conn_id,
+                                              tBTA_GATTC_CHAR_DESCR_ID *p_char_descr_id,
+                                              tBTA_GATTC_WRITE_TYPE  write_type,
+                                              tBTA_GATT_UNFMT   *p_data,
+                                              tBTA_GATT_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_SendIndConfirm
+**
+** Description      This function is called to send handle value confirmation.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - characteristic ID to confrim.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_SendIndConfirm (UINT16 conn_id, tBTA_GATTC_CHAR_ID *p_char_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_RegisterForNotifications
+**
+** Description      This function is called to register for notification of a service.
+**
+** Parameters       client_if   - client interface.
+**                  remote_bda  - target GATT server.
+**                  p_char_id   - pointer to GATT characteristic ID.
+**
+** Returns          OK if registration succeed, otherwise failed.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS BTA_GATTC_RegisterForNotifications (tBTA_GATTC_IF      client_if,
+                                                                    BD_ADDR            remote_bda,
+                                                                    tBTA_GATTC_CHAR_ID *p_char_id);
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_DeregisterForNotifications
+**
+** Description      This function is called to de-register for notification of a servbice.
+**
+** Parameters       client_if - client interface.
+**                  remote_bda - target GATT server.
+**                  p_char_id - pointer to a GATT characteristic ID.
+**
+** Returns          OK if deregistration succeed, otherwise failed.
+**
+*******************************************************************************/
+BTA_API extern tBTA_GATT_STATUS BTA_GATTC_DeregisterForNotifications (tBTA_GATTC_IF      client_if,
+                                                                      BD_ADDR            remote_bda,
+                                                                      tBTA_GATTC_CHAR_ID *p_char_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_PrepareWrite
+**
+** Description      This function is called to prepare write a characteristic value.
+**
+** Parameters       conn_id - connection ID.
+**                    p_char_id - GATT characteritic ID of the service.
+**                  offset - offset of the write value.
+**                  len: length of the data to be written.
+**                  p_value - the value to be written.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_PrepareWrite  (UINT16 conn_id,
+                                             tBTA_GATTC_CHAR_ID *p_char_id,
+                                             UINT16 offset,
+                                             UINT16 len,
+                                             UINT8 *p_value,
+                                             tBTA_GATT_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ExecuteWrite
+**
+** Description      This function is called to execute write a prepare write sequence.
+**
+** Parameters       conn_id - connection ID.
+**                    is_execute - execute or cancel.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_ExecuteWrite  (UINT16 conn_id, BOOLEAN is_execute);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTC_ReadMultiple
+**
+** Description      This function is called to read multiple characteristic or
+**                  characteristic descriptors.
+**
+** Parameters       conn_id - connectino ID.
+**                    p_read_multi - read multiple parameters.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTA_API extern void BTA_GATTC_ReadMultiple(UINT16 conn_id, tBTA_GATTC_MULTI *p_read_multi,
+                                           tBTA_GATT_AUTH_REQ auth_req);
+
+
+
+
+/*******************************************************************************
+**  BTA GATT Server API
+********************************************************************************/
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AppRegister
+**
+** Description      This function is called to register application callbacks
+**                    with BTA GATTS module.
+**
+** Parameters       p_app_uuid - applicaiton UUID
+**                  p_cback - pointer to the application callback function.
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_AppRegister(tBT_UUID *p_app_uuid, tBTA_GATTS_CBACK *p_cback);
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AppDeregister
+**
+** Description      De-register with BTA GATT Server.
+**
+** Parameters       server_if: server interface
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_AppDeregister(tBTA_GATTS_IF server_if);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_CreateService
+**
+** Description      Create a service. When service creation is done, a callback
+**                  event BTA_GATTS_CREATE_SRVC_EVT is called to report status
+**                  and service ID to the profile. The service ID obtained in
+**                  the callback function needs to be used when adding included
+**                  service and characteristics/descriptors into the service.
+**
+** Parameters       server_if: server interface.
+**                  p_service_uuid: service UUID.
+**                  inst: instance ID number of this service.
+**                  num_handle: numble of handle requessted for this service.
+**                  is_primary: is this service a primary one or not.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_CreateService(tBTA_GATTS_IF server_if, tBT_UUID *p_service_uuid,
+                                                UINT8 inst, UINT16 num_handle, BOOLEAN is_primary);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddIncludeService
+**
+** Description      This function is called to add an included service. After included
+**                  service is included, a callback event BTA_GATTS_ADD_INCL_SRVC_EVT
+**                  is reported the included service ID.
+**
+** Parameters       service_id: service ID to which this included service is to
+**                              be added.
+**                  included_service_id: the service ID to be included.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_AddIncludeService(UINT16 service_id, UINT16 included_service_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddCharacteristic
+**
+** Description      This function is called to add a characteristic into a service.
+**
+** Parameters       service_id: service ID to which this included service is to
+**                              be added.
+**                  p_char_uuid : Characteristic UUID.
+**                  perm      : Characteristic value declaration attribute permission.
+**                  property  : Characteristic Properties
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_AddCharacteristic (UINT16 service_id,  tBT_UUID   *p_char_uuid,
+                                                     tBTA_GATT_PERM perm, tBTA_GATT_CHAR_PROP property);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_AddCharDescriptor
+**
+** Description      This function is called to add characteristic descriptor. When
+**                  it's done, a callback event BTA_GATTS_ADD_DESCR_EVT is called
+**                  to report the status and an ID number for this descriptor.
+**
+** Parameters       service_id: service ID to which this charatceristic descriptor is to
+**                              be added.
+**                  perm: descriptor access permission.
+**                  p_descr_uuid: descriptor UUID.
+**                  p_descr_params: descriptor value if it's read only descriptor.
+**
+** Returns          returns status.
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_AddCharDescriptor (UINT16 service_id,
+                                                     tBTA_GATT_PERM perm,
+                                                     tBT_UUID  * p_descr_uuid);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_DeleteService
+**
+** Description      This function is called to delete a service. When this is done,
+**                  a callback event BTA_GATTS_DELETE_EVT is report with the status.
+**
+** Parameters       service_id: service_id to be deleted.
+**
+** Returns          returns none.
+**
+*******************************************************************************/
+    BTA_API extern void  BTA_GATTS_DeleteService(UINT16 service_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_StartService
+**
+** Description      This function is called to start a service.
+**
+** Parameters       service_id: the service ID to be started.
+**                  sup_transport: supported trasnport.
+**
+** Returns          None.
+**
+*******************************************************************************/
+    BTA_API extern void  BTA_GATTS_StartService(UINT16 service_id, tBTA_GATT_TRANSPORT sup_transport);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_StopService
+**
+** Description      This function is called to stop a service.
+**
+** Parameters       service_id - service to be topped.
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_StopService(UINT16 service_id);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_HandleValueIndication
+**
+** Description      This function is called to read a characteristics descriptor.
+**
+** Parameters       conn_id - connection identifier.
+**					attr_id - attribute ID to indicate.
+**                  data_len - indicate data length.
+**                  p_data: data to indicate.
+**                  need_confirm - if this indication expects a confirmation or not.
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_HandleValueIndication (UINT16 conn_id, UINT16 attr_id,
+                                                         UINT16 data_len,
+                                                         UINT8 *p_data,
+                                                         BOOLEAN need_confirm);
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_SendRsp
+**
+** Description      This function is called to send a response to a request.
+**
+** Parameters       conn_id - connection identifier.
+**                  trans_id - transaction ID.
+**                  status - response status
+**                  p_msg - response data.
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_SendRsp (UINT16 conn_id, UINT32 trans_id,
+                                           tBTA_GATT_STATUS status, tBTA_GATTS_RSP *p_msg);
+
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_Open
+**
+** Description      Open a direct open connection or add a background auto connection
+**                  bd address
+**
+** Parameters       server_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_Open(tBTA_GATTS_IF server_if, BD_ADDR remote_bda, BOOLEAN is_direct);
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_CancelOpen
+**
+** Description      Cancel a direct open connection or remove a background auto connection
+**                  bd address
+**
+** Parameters       server_if: server interface.
+**                  remote_bda: remote device BD address.
+**                  is_direct: direct connection or background auto connection
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_CancelOpen(tBTA_GATTS_IF server_if, BD_ADDR remote_bda, BOOLEAN is_direct);
+
+
+/*******************************************************************************
+**
+** Function         BTA_GATTS_Close
+**
+** Description      Close a connection  a remote device.
+**
+** Parameters       conn_id: connectino ID to be closed.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_GATTS_Close(UINT16 conn_id);
+
+
+#ifdef __cplusplus
+
+}
+#endif
+
+
+#endif /* BTA_GATT_API_H */
+
diff --git a/bta/include/bta_gattc_ci.h b/bta/include/bta_gattc_ci.h
new file mode 100644
index 0000000..1525e3e
--- /dev/null
+++ b/bta/include/bta_gattc_ci.h
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for GATT call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_GATTC_CI_H
+#define BTA_GATTC_CI_H
+
+#include "bta_gatt_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* Open Complete Event */
+typedef struct
+{
+    BT_HDR            hdr;
+    tBTA_GATT_STATUS  status;
+} tBTA_GATTC_CI_EVT;
+
+#define BTA_GATTC_NV_LOAD_MAX   10
+
+/* Read Ready Event */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_GATT_STATUS    status;
+    UINT16              num_attr;
+    tBTA_GATTC_NV_ATTR  attr[BTA_GATTC_NV_LOAD_MAX];
+} tBTA_GATTC_CI_LOAD;
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_cache_open
+**
+** Description      This function sends an event to indicate server cache open
+**                  completed.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_ci_cache_open(BD_ADDR server_bda, UINT16 evt,
+                                            tBTA_GATT_STATUS status, UINT16 conn_id);
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_cache_load
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  load the servere cache and ready to send it to the stack.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  num_bytes_read - number of bytes read into the buffer
+**                      specified in the read callout-function.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_ci_cache_load(BD_ADDR server_bda, UINT16 evt,
+                                            UINT16 num_attr, tBTA_GATTC_NV_ATTR *p_atrr,
+                                            tBTA_GATT_STATUS status, UINT16 conn_id);
+
+/*******************************************************************************
+**
+** Function         bta_gattc_ci_save
+**
+** Description      This function sends an event to BTA indicating the phone has
+**                  save the server cache.
+**
+** Parameters       server_bda - server BDA of this cache.
+**                  status - BTA_GATT_OK if full buffer of data,
+**                           BTA_GATT_FAIL if an error has occurred.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_ci_cache_save(BD_ADDR server_bda, UINT16 evt,
+                                            tBTA_GATT_STATUS status, UINT16 conn_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_GATTC_CI_H */
+
diff --git a/bta/include/bta_gattc_co.h b/bta/include/bta_gattc_co.h
new file mode 100644
index 0000000..d2392b8
--- /dev/null
+++ b/bta/include/bta_gattc_co.h
@@ -0,0 +1,101 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for BTA GATT client call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_GATTC_CO_H
+#define BTA_GATTC_CO_H
+
+#include "bta_gatt_api.h"
+
+/*******************************************************************************
+**
+** Function         bta_gattc_co_cache_open
+**
+** Description      This callout function is executed by GATTC when a GATT server
+**                  cache is ready to be sent.
+**
+** Parameter        server_bda: server bd address of this cache belongs to
+**                  evt: call in event to be passed in when cache open is done.
+**                  conn_id: connection ID of this cache operation attach to.
+**                  to_save: open cache to save or to load.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_co_cache_open(BD_ADDR server_bda, UINT16 evt,
+                                            UINT16 conn_id, BOOLEAN to_save);
+
+/*******************************************************************************
+**
+** Function         bta_gattc_co_cache_close
+**
+** Description      This callout function is executed by GATTC when a GATT server
+**                  cache is written completely.
+**
+** Parameter        server_bda: server bd address of this cache belongs to
+**                  conn_id: connection ID of this cache operation attach to.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_co_cache_close(BD_ADDR server_bda, UINT16 conn_id);
+
+/*******************************************************************************
+**
+** Function         bta_gattc_co_cache_save
+**
+** Description      This callout function is executed by GATT when a server cache
+**                  is available to save.
+**
+** Parameter        server_bda: server bd address of this cache belongs to
+**                  evt: call in event to be passed in when cache save is done.
+**                  num_attr: number of attribute to be save.
+**                  p_attr: pointer to the list of attributes to save.
+**                  attr_index: starting attribute index of the save operation.
+**                  conn_id: connection ID of this cache operation attach to.
+** Returns
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_co_cache_save(BD_ADDR server_bda, UINT16 evt,
+                                          UINT16 num_attr, tBTA_GATTC_NV_ATTR *p_attr,
+                                          UINT16 attr_index, UINT16 conn_id);
+
+/*******************************************************************************
+**
+** Function         bta_gattc_co_cache_load
+**
+** Description      This callout function is executed by GATT when server cache
+**                  is required to load.
+**
+** Parameter        server_bda: server bd address of this cache belongs to
+**                  evt: call in event to be passed in when cache save is done.
+**                  num_attr: number of attribute to be save.
+**                  attr_index: starting attribute index of the save operation.
+**                  conn_id: connection ID of this cache operation attach to.
+** Returns
+**
+*******************************************************************************/
+BTA_API extern void bta_gattc_co_cache_load(BD_ADDR server_bda, UINT16 evt,
+                                            UINT16 start_index, UINT16 conn_id);
+
+#endif /* BTA_GATT_CO_H */
+
diff --git a/bta/include/bta_gatts_co.h b/bta/include/bta_gatts_co.h
new file mode 100644
index 0000000..86f65dc
--- /dev/null
+++ b/bta/include/bta_gatts_co.h
@@ -0,0 +1,82 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for BTA GATT server call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_GATTS_CO_H
+#define BTA_GATTS_CO_H
+
+#include "bta_gatt_api.h"
+
+/*******************************************************************************
+**
+** Function         bta_gatts_co_update_handle_range
+**
+** Description      This callout function is executed by GATTS when a GATT server
+**                  handle range ios to be added or removed.
+**
+** Parameter        is_add: true is to add a handle range; otherwise is to delete.
+**                  p_hndl_range: handle range.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_gatts_co_update_handle_range(BOOLEAN is_add, tBTA_GATTS_HNDL_RANGE *p_hndl_range);
+
+/*******************************************************************************
+**
+** Function         bta_gatts_co_srv_chg
+**
+** Description      This call-out is to read/write/remove service change related
+**                  informaiton. The request consists of the cmd and p_req and the
+**                  response is returned in p_rsp
+**
+** Parameter        cmd - request command
+**                  p_req - request paramters
+**                  p_rsp - response data for the request
+**
+** Returns          TRUE - if the request is processed successfully and
+**                         the response is returned in p_rsp.
+**                  FASLE - if the request can not be processed
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_gatts_co_srv_chg(tBTA_GATTS_SRV_CHG_CMD cmd,
+                                            tBTA_GATTS_SRV_CHG_REQ *p_req,
+                                            tBTA_GATTS_SRV_CHG_RSP *p_rsp);
+
+/*******************************************************************************
+**
+** Function         bta_gatts_co_load_handle_range
+**
+** Description      This callout function is executed by GATTS when a GATT server
+**                  handle range is requested to be loaded from NV.
+**
+** Parameter
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern  BOOLEAN bta_gatts_co_load_handle_range(UINT8 index,
+                                                       tBTA_GATTS_HNDL_RANGE *p_handle);
+
+
+#endif /* BTA_GATTS_CO_H */
+
diff --git a/bta/include/bta_hh_api.h b/bta/include/bta_hh_api.h
new file mode 100644
index 0000000..f613d30
--- /dev/null
+++ b/bta/include/bta_hh_api.h
@@ -0,0 +1,479 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef BTA_HH_API_H
+#define BTA_HH_API_H
+
+#include "bta_api.h"
+#include "hidh_api.h"
+
+/*****************************************************************************
+**  Constants and Type Definitions
+*****************************************************************************/
+#ifndef BTA_HH_DEBUG
+#define BTA_HH_DEBUG    FALSE
+#endif
+
+#ifndef BTA_HH_SSR_MAX_LATENCY_DEF
+#define BTA_HH_SSR_MAX_LATENCY_DEF  1600
+#endif
+
+#ifndef BTA_HH_SSR_MIN_TOUT_DEF
+#define BTA_HH_SSR_MIN_TOUT_DEF     2
+#endif
+
+/* BTA HID Host callback events */
+#define BTA_HH_ENABLE_EVT       0       /* HH enabled */
+#define BTA_HH_DISABLE_EVT      1       /* HH disabled */
+#define BTA_HH_OPEN_EVT         2       /* connection opened */
+#define BTA_HH_CLOSE_EVT        3       /* connection closed */
+#define BTA_HH_GET_RPT_EVT      4       /* BTA_HhGetReport callback */
+#define BTA_HH_SET_RPT_EVT      5       /* BTA_HhSetReport callback */
+#define BTA_HH_GET_PROTO_EVT    6       /* BTA_GetProtoMode callback */
+#define BTA_HH_SET_PROTO_EVT    7       /* BTA_HhSetProtoMode callback */
+#define BTA_HH_GET_IDLE_EVT     8       /* BTA_HhGetIdle comes callback */
+#define BTA_HH_SET_IDLE_EVT     9       /* BTA_HhSetIdle finish callback */
+#define BTA_HH_GET_DSCP_EVT     10      /* Get report descripotor */
+#define BTA_HH_ADD_DEV_EVT      11      /* Add Device callback */
+#define BTA_HH_RMV_DEV_EVT      12      /* remove device finished */
+#define BTA_HH_VC_UNPLUG_EVT    13      /* virtually unplugged */
+#define BTA_HH_UPDATE_UCD_EVT   14
+#define BTA_HH_API_ERR_EVT      15      /* API error is caught */
+
+typedef UINT16 tBTA_HH_EVT;
+
+/* defined the minimum offset */
+#define BTA_HH_MIN_OFFSET       L2CAP_MIN_OFFSET+1
+
+#define BTA_HH_MAX_KNOWN        HID_HOST_MAX_DEVICES
+/* invalid device handle */
+#define BTA_HH_INVALID_HANDLE   0xff
+
+/* type of protocol mode */
+#define BTA_HH_PROTO_RPT_MODE                   (0x00)
+#define BTA_HH_PROTO_BOOT_MODE                  (0x01)
+#define BTA_HH_PROTO_UNKNOWN                    (0xff)
+typedef UINT8   tBTA_HH_PROTO_MODE;
+
+enum
+{
+    BTA_HH_KEYBD_RPT_ID  =               1,
+    BTA_HH_MOUSE_RPT_ID
+};
+typedef UINT8 tBTA_HH_BOOT_RPT_ID;
+
+/* type of devices, bit mask */
+#define BTA_HH_DEVT_UNKNOWN      0x00
+#define BTA_HH_DEVT_JOS          0x01           /* joy stick */
+#define BTA_HH_DEVT_GPD          0x02           /* game pad */
+#define BTA_HH_DEVT_RMC          0x03           /* remote control */
+#define BTA_HH_DEVT_SED          0x04           /* sensing device */
+#define BTA_HH_DEVT_DGT          0x05           /* Digitizer tablet */
+#define BTA_HH_DEVT_CDR          0x06           /* card reader */
+#define BTA_HH_DEVT_KBD          0x10           /* keyboard */
+#define BTA_HH_DEVT_MIC          0x20           /* pointing device */
+#define BTA_HH_DEVT_COM          0x30           /* Combo keyboard/pointing */
+#define BTA_HH_DEVT_OTHER        0x80
+typedef UINT8  tBTA_HH_DEVT;
+
+enum
+{
+    BTA_HH_OK,
+    BTA_HH_HS_HID_NOT_READY,    /* handshake error : device not ready */
+    BTA_HH_HS_INVALID_RPT_ID,   /* handshake error : invalid report ID */
+    BTA_HH_HS_TRANS_NOT_SPT,    /* handshake error : transaction not spt */
+    BTA_HH_HS_INVALID_PARAM,    /* handshake error : invalid paremter */
+    BTA_HH_HS_ERROR,            /* handshake error : unspecified HS error */
+    BTA_HH_ERR,                 /* general BTA HH error */
+    BTA_HH_ERR_SDP,             /* SDP error */
+    BTA_HH_ERR_PROTO,           /* SET_Protocol error,
+                                    only used in BTA_HH_OPEN_EVT callback */
+    BTA_HH_ERR_DB_FULL,         /* device database full error, used in
+                                   BTA_HH_OPEN_EVT/BTA_HH_ADD_DEV_EVT */
+    BTA_HH_ERR_TOD_UNSPT,       /* type of device not supported */
+    BTA_HH_ERR_NO_RES,          /* out of system resources */
+    BTA_HH_ERR_AUTH_FAILED,     /* authentication fail */
+    BTA_HH_ERR_HDL
+};
+typedef UINT8 tBTA_HH_STATUS;
+
+
+#define BTA_HH_VIRTUAL_CABLE           HID_VIRTUAL_CABLE
+#define BTA_HH_NORMALLY_CONNECTABLE    HID_NORMALLY_CONNECTABLE
+#define BTA_HH_RECONN_INIT             HID_RECONN_INIT
+#define BTA_HH_SDP_DISABLE             HID_SDP_DISABLE
+#define BTA_HH_BATTERY_POWER           HID_BATTERY_POWER
+#define BTA_HH_REMOTE_WAKE             HID_REMOTE_WAKE
+#define BTA_HH_SUP_TOUT_AVLBL          HID_SUP_TOUT_AVLBL
+#define BTA_HH_SEC_REQUIRED             HID_SEC_REQUIRED
+typedef UINT16 tBTA_HH_ATTR_MASK;
+
+
+/* supported type of device and corresponding application ID */
+typedef struct
+{
+    tBTA_HH_DEVT        tod;        /* type of device               */
+    UINT8               app_id;     /* corresponding application ID */
+}tBTA_HH_SPT_TOD;
+
+/* configuration struct */
+typedef struct
+{
+    UINT8                max_devt_spt; /* max number of types of devices spt */
+    tBTA_HH_SPT_TOD     *p_devt_list;  /* supported types of device list     */
+    UINT16               sdp_db_size;
+}tBTA_HH_CFG;
+
+enum
+{
+    BTA_HH_RPTT_RESRV,      /* reserved         */
+    BTA_HH_RPTT_INPUT,      /* input report     */
+    BTA_HH_RPTT_OUTPUT,     /* output report    */
+    BTA_HH_RPTT_FEATURE     /* feature report   */
+};
+typedef UINT8 tBTA_HH_RPT_TYPE;
+
+/* HID_CONTROL operation code used in BTA_HhSendCtrl()
+*/
+enum
+{
+    BTA_HH_CTRL_NOP         = 0 + HID_PAR_CONTROL_NOP ,/* mapping from BTE */
+    BTA_HH_CTRL_HARD_RESET,                            /* hard reset       */
+    BTA_HH_CTRL_SOFT_RESET,                            /* soft reset       */
+    BTA_HH_CTRL_SUSPEND,                               /* enter suspend    */
+    BTA_HH_CTRL_EXIT_SUSPEND,                          /* exit suspend     */
+    BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG                   /* virtual unplug   */
+};
+typedef UINT8 tBTA_HH_TRANS_CTRL_TYPE;
+
+typedef tHID_DEV_DSCP_INFO tBTA_HH_DEV_DESCR;
+
+/* id DI is not existing in remote device, vendor_id in tBTA_HH_DEV_DSCP_INFO will be set to 0xffff */
+#define BTA_HH_VENDOR_ID_INVALID       0xffff
+
+
+/* report descriptor information */
+typedef struct
+{
+    UINT16              vendor_id;      /* vendor ID */
+    UINT16              product_id;     /* product ID */
+    UINT16              version;        /* version */
+    UINT16              ssr_max_latency;    /* SSR max latency */
+    UINT16              ssr_min_tout;       /* SSR min timeout */
+    UINT8               ctry_code;      /*Country Code.*/
+    tBTA_HH_DEV_DESCR   descriptor;
+}tBTA_HH_DEV_DSCP_INFO;
+
+/* callback event data for BTA_HH_OPEN_EVT */
+typedef struct
+{
+    BD_ADDR         bda;                /* HID device bd address    */
+    tBTA_HH_STATUS  status;             /* operation status         */
+    UINT8           handle;             /* device handle            */
+} tBTA_HH_CONN;
+
+typedef tBTA_HH_CONN tBTA_HH_DEV_INFO;
+
+/* callback event data */
+typedef struct
+{
+    tBTA_HH_STATUS              status;     /* operation status         */
+    UINT8                       handle;     /* device handle            */
+} tBTA_HH_CBDATA;
+
+enum
+{
+    BTA_HH_MOD_CTRL_KEY,
+    BTA_HH_MOD_SHFT_KEY,
+    BTA_HH_MOD_ALT_KEY,
+    BTA_HH_MOD_GUI_KEY,
+    BTA_HH_MOD_MAX_KEY
+};
+
+/* parsed boot mode keyboard report */
+typedef struct
+{
+    UINT8               this_char[6];       /* virtual key code     */
+    BOOLEAN             mod_key[BTA_HH_MOD_MAX_KEY];
+                                            /* ctrl, shift, Alt, GUI */
+                                            /* modifier key: is Shift key pressed */
+                                            /* modifier key: is Ctrl key pressed  */
+                                            /* modifier key: is Alt key pressed   */
+                                            /* modifier key: GUI up/down */
+    BOOLEAN             caps_lock;          /* is caps locked       */
+    BOOLEAN             num_lock;           /* is Num key pressed   */
+} tBTA_HH_KEYBD_RPT;
+
+/* parsed boot mode mouse report */
+typedef struct
+{
+    UINT8               mouse_button;       /* mouse button is clicked   */
+    INT8                delta_x;            /* displacement x            */
+    INT8                delta_y;            /* displacement y            */
+}tBTA_HH_MICE_RPT;
+
+/* parsed Boot report */
+typedef struct
+{
+    tBTA_HH_BOOT_RPT_ID dev_type;           /* type of device report */
+    union
+    {
+        tBTA_HH_KEYBD_RPT   keybd_rpt;      /* keyboard report      */
+        tBTA_HH_MICE_RPT    mice_rpt;       /* mouse report         */
+    }                   data_rpt;
+} tBTA_HH_BOOT_RPT;
+
+/* handshake data */
+typedef struct
+{
+    tBTA_HH_STATUS  status;                 /* handshake status */
+    UINT8           handle;                 /* device handle    */
+    union
+    {
+        tBTA_HH_PROTO_MODE      proto_mode; /* GET_PROTO_EVT :protocol mode */
+        BT_HDR                  *p_rpt_data;   /* GET_RPT_EVT   : report data  */
+        UINT8                   idle_rate;  /* GET_IDLE_EVT  : idle rate    */
+    }               rsp_data;
+
+}tBTA_HH_HSDATA;
+
+/* union of data associated with HD callback */
+typedef union
+{
+    tBTA_HH_DEV_INFO        dev_info;           /* BTA_HH_ADD_DEV_EVT, BTA_HH_RMV_DEV_EVT   */
+    tBTA_HH_CONN            conn;               /* BTA_HH_OPEN_EVT      */
+    tBTA_HH_CBDATA          dev_status;         /* BTA_HH_CLOSE_EVT,
+                                                   BTA_HH_SET_PROTO_EVT
+                                                   BTA_HH_SET_RPT_EVT
+                                                   BTA_HH_SET_IDLE_EVT  */
+
+    tBTA_HH_STATUS          status;             /* BTA_HH_ENABLE_EVT */
+    tBTA_HH_DEV_DSCP_INFO   dscp_info;          /* BTA_HH_GET_DSCP_EVT */
+    tBTA_HH_HSDATA          hs_data;            /* GET_ transaction callback
+                                                   BTA_HH_GET_RPT_EVT
+                                                   BTA_HH_GET_PROTO_EVT
+                                                   BTA_HH_GET_IDLE_EVT */
+} tBTA_HH;
+
+/* BTA HH callback function */
+typedef void (tBTA_HH_CBACK) (tBTA_HH_EVT event, tBTA_HH *p_data);
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         BTA_HhRegister
+**
+** Description      This function enable HID host and registers HID-Host with
+**                  lower layers.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhEnable(tBTA_SEC sec_mask, BOOLEAN ucd_enabled, tBTA_HH_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_HhDeregister
+**
+** Description      This function is called when the host is about power down.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhDisable(void);
+
+/*******************************************************************************
+**
+** Function         BTA_HhOpen
+**
+** Description      This function is called to start an inquiry and read SDP
+**                  record of responding devices; connect to a device if only
+**                  one active HID device is found.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhOpen (BD_ADDR dev_bda, tBTA_HH_PROTO_MODE mode,
+                                tBTA_SEC sec_mask);
+
+/*******************************************************************************
+**
+** Function         BTA_HhClose
+**
+** Description      This function disconnects the device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhClose(UINT8 dev_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HhSetProtoMode
+**
+** Description      This function set the protocol mode at specified HID handle
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhSetProtoMode(UINT8 handle, tBTA_HH_PROTO_MODE t_type);
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetProtoMode
+**
+** Description      This function get the protocol mode of a specified HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhGetProtoMode(UINT8 dev_handle);
+/*******************************************************************************
+**
+** Function         BTA_HhSetReport
+**
+** Description      send SET_REPORT to device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhSetReport(UINT8 dev_handle, tBTA_HH_RPT_TYPE r_type,
+                                        BT_HDR *p_data);
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetReport
+**
+** Description      Send a GET_REPORT to HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhGetReport(UINT8 dev_handle, tBTA_HH_RPT_TYPE r_type,
+                                    UINT8 rpt_id, UINT16 buf_size);
+/*******************************************************************************
+**
+** Function         BTA_HhSendCtrl
+**
+** Description      Send HID_CONTROL request to a HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhSendCtrl(UINT8 dev_handle,
+                                   tBTA_HH_TRANS_CTRL_TYPE c_type);
+
+/*******************************************************************************
+**
+** Function         BTA_HhSetIdle
+**
+** Description      send SET_IDLE to device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhSetIdle(UINT8 dev_handle, UINT16 idle_rate);
+
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetIdle
+**
+** Description      Send a GET_IDLE from HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhGetIdle(UINT8 dev_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HhSendData
+**
+** Description      Send DATA transaction to a HID device.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhSendData(UINT8 dev_handle, BD_ADDR dev_bda, BT_HDR  *p_buf);
+
+/*******************************************************************************
+**
+** Function         BTA_HhGetDscpInfo
+**
+** Description      Get report descriptor of the device
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhGetDscpInfo(UINT8 dev_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HhAddDev
+**
+** Description      Add a virtually cabled device into HID-Host device list
+**                  to manage and assign a device handle for future API call,
+**                  host applciation call this API at start-up to initialize its
+**                  virtually cabled devices.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhAddDev(BD_ADDR bda, tBTA_HH_ATTR_MASK attr_mask,
+                                 UINT8 sub_class, UINT8 app_id,
+                                 tBTA_HH_DEV_DSCP_INFO dscp_info);
+/*******************************************************************************
+**
+** Function         BTA_HhRemoveDev
+**
+** Description      Remove a device from the HID host devices list.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhRemoveDev(UINT8 dev_handle );
+/*******************************************************************************
+**
+**              Parsing Utility Functions
+**
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         BTA_HhParseBootRpt
+**
+** Description      This utility function parse a boot mode report.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_HhParseBootRpt(tBTA_HH_BOOT_RPT *p_data, UINT8 *p_report,
+                                       UINT16 report_len);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* BTA_HH_API_H */
diff --git a/bta/include/bta_hh_co.h b/bta/include/bta_hh_co.h
new file mode 100644
index 0000000..8f648df
--- /dev/null
+++ b/bta/include/bta_hh_co.h
@@ -0,0 +1,72 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2005-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for hid host call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_HH_CO_H
+#define BTA_HH_CO_H
+
+#include "bta_hh_api.h"
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_co_data
+**
+** Description      This callout function is executed by HH when data is received
+**                  in interupt channel.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_hh_co_data(UINT8 dev_handle, UINT8 *p_rpt, UINT16 len,
+                                   tBTA_HH_PROTO_MODE  mode, UINT8 sub_class,
+                                   UINT8 ctry_code, BD_ADDR peer_addr, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_hh_co_open
+**
+** Description      This callout function is executed by HH when connection is
+**                  opened, and application may do some device specific
+**                  initialization.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_hh_co_open(UINT8 dev_handle, UINT8 sub_class,
+                                   UINT16 attr_mask, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_hh_co_close
+**
+** Description      This callout function is executed by HH when connection is
+**                  closed, and device specific finalizatio nmay be needed.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BTA_API extern void bta_hh_co_close(UINT8 dev_handle, UINT8 app_id);
+
+#endif /* BTA_HH_CO_H */
+
diff --git a/bta/include/bta_hl_api.h b/bta/include/bta_hl_api.h
new file mode 100644
index 0000000..e7febf8
--- /dev/null
+++ b/bta/include/bta_hl_api.h
@@ -0,0 +1,908 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the HeaLth device profile (HL)
+ *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_HL_API_H
+#define BTA_HL_API_H
+
+#include "bta_api.h"
+#include "btm_api.h"
+#include "mca_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/* Extra Debug Code */
+#ifndef BTA_HL_DEBUG
+#define BTA_HL_DEBUG           TRUE
+#endif
+
+#ifndef BTA_HL_NUM_APPS
+#define BTA_HL_NUM_APPS                 3
+#endif
+
+#ifndef BTA_HL_NUM_MDEPS
+#define BTA_HL_NUM_MDEPS                5
+#endif
+
+#ifndef BTA_HL_NUM_MCLS
+#define BTA_HL_NUM_MCLS                 7
+#endif
+
+#ifndef BTA_HL_NUM_MDLS_PER_MDEP
+#define BTA_HL_NUM_MDLS_PER_MDEP        4
+#endif
+
+#ifndef BTA_HL_NUM_MDLS_PER_MCL
+#define BTA_HL_NUM_MDLS_PER_MCL         10
+#endif
+
+#ifndef BTA_HL_NUM_DATA_TYPES
+#define BTA_HL_NUM_DATA_TYPES            5   /* maximum number of data types can be supported
+                                                per MDEP ID */
+#endif
+
+#define BTA_HL_MCAP_RSP_TOUT            2    /* 2 seconds */
+
+#ifndef BTA_HL_CCH_NUM_FILTER_ELEMS
+#define BTA_HL_CCH_NUM_FILTER_ELEMS     3
+#endif
+
+#ifndef BTA_HL_NUM_SDP_CBACKS
+#define BTA_HL_NUM_SDP_CBACKS           7
+#endif
+
+#ifndef BTA_HL_NUM_SDP_RECS
+#define BTA_HL_NUM_SDP_RECS             3
+#endif
+
+#ifndef BTA_HL_NUM_SDP_MDEPS
+#define BTA_HL_NUM_SDP_MDEPS            10
+#endif
+
+#ifndef BTA_HL_NUM_SVC_ELEMS
+#define BTA_HL_NUM_SVC_ELEMS            2
+#endif
+
+#ifndef BTA_HL_NUM_PROTO_ELEMS
+#define BTA_HL_NUM_PROTO_ELEMS          2
+#endif
+
+#define BTA_HL_VERSION_01_00            0x0100
+#define BTA_HL_NUM_ADD_PROTO_LISTS      1
+#define BTA_HL_NUM_ADD_PROTO_ELEMS      2
+#define BTA_HL_MDEP_SEQ_SIZE            20
+#define BTA_HL_VAL_ARRY_SIZE            320
+
+#ifndef BTA_HL_NUM_MDL_CFGS
+#define BTA_HL_NUM_MDL_CFGS             16    /* numer of MDL cfg saved in the persistent memory*/
+#endif
+
+#define BTA_HL_NUM_TIMERS               7
+
+#define BTA_HL_CCH_RSP_TOUT             2000
+#define BTA_HL_LRG_POOL_ID              GKI_POOL_ID_7
+#define BTA_HL_MAX_TIME                 255
+#define BTA_HL_MIN_TIME                 1
+#define BTA_HL_INVALID_APP_HANDLE       0xFF
+#define BTA_HL_INVALID_MCL_HANDLE       0xFF
+#define BTA_HL_INVALID_MDL_HANDLE       0xFFFF
+
+#define BTA_HL_STATUS_OK                    0
+#define BTA_HL_STATUS_FAIL                  1   /* Used to pass all other errors */
+#define BTA_HL_STATUS_ABORTED               2
+#define BTA_HL_STATUS_NO_RESOURCE           3
+#define BTA_HL_STATUS_LAST_ITEM             4
+#define BTA_HL_STATUS_DUPLICATE_APP_ID      5
+#define BTA_HL_STATUS_INVALID_APP_HANDLE    6
+#define BTA_HL_STATUS_INVALID_MCL_HANDLE    7
+#define BTA_HL_STATUS_MCAP_REG_FAIL         8
+#define BTA_HL_STATUS_MDEP_CO_FAIL          9
+#define BTA_HL_STATUS_ECHO_CO_FAIL          10
+#define BTA_HL_STATUS_MDL_CFG_CO_FAIL       11
+#define BTA_HL_STATUS_SDP_NO_RESOURCE       12
+#define BTA_HL_STATUS_SDP_FAIL              13
+#define BTA_HL_STATUS_NO_CCH                14
+#define BTA_HL_STATUS_NO_MCL                15
+
+#define BTA_HL_STATUS_NO_FIRST_RELIABLE     17
+#define BTA_HL_STATUS_INVALID_DCH_CFG       18
+#define BTA_HL_STATUS_INVALID_MDL_HANDLE    19
+#define BTA_HL_STATUS_INVALID_BD_ADDR       20
+#define BTA_HL_STATUS_INVALID_RECONNECT_CFG 21
+#define BTA_HL_STATUS_ECHO_TEST_BUSY        22
+#define BTA_HL_STATUS_INVALID_LOCAL_MDEP_ID 23
+#define BTA_HL_STATUS_INVALID_MDL_ID        24
+#define BTA_HL_STATUS_NO_MDL_ID_FOUND       25
+#define BTA_HL_STATUS_DCH_BUSY              26  /* DCH is congested*/
+#define BTA_HL_STATUS_INVALID_CTRL_PSM      27
+
+typedef UINT8 tBTA_HL_STATUS;
+typedef tMCA_HANDLE tBTA_HL_APP_HANDLE;
+typedef tMCA_CL     tBTA_HL_MCL_HANDLE;
+typedef tMCA_DL     tBTA_HL_MDL_HANDLE;
+enum
+{
+    BTA_HL_DEVICE_TYPE_SINK,
+    BTA_HL_DEVICE_TYPE_SOURCE,
+    BTA_HL_DEVICE_TYPE_DUAL
+};
+
+typedef UINT8 tBTA_HL_DEVICE_TYPE;
+
+
+
+#define BTA_HL_SDP_IEEE_11073_20601             0x01
+
+#define BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT          2 /* 0x02 */
+#define BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT        4 /* 0x04 */
+#define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE          0 /* 0x08 */
+#define BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER         0 /* 0x10 */
+
+#define BTA_HL_MCAP_SUP_PROC_MASK  (BTA_HL_MCAP_SUP_RECONNECT_MASK_INIT | \
+                                    BTA_HL_MCAP_SUP_RECONNECT_MASK_ACCEPT | \
+                                    BTA_HL_MCAP_SUP_CSP_MASK_SYNC_SLAVE | \
+                                    BTA_HL_MCAP_SUP_CSP_MASK_SYNC_MASTER)
+#define BTA_HL_MDEP_ROLE_SOURCE         0x00
+#define BTA_HL_MDEP_ROLE_SINK           0x01
+
+typedef UINT8 tBTA_HL_MDEP_ROLE;
+
+#define BTA_HL_MDEP_ROLE_MASK_SOURCE    0x01     /* bit mask */
+#define BTA_HL_MDEP_ROLE_MASK_SINK      0x02
+typedef UINT8 tBTA_HL_MDEP_ROLE_MASK;
+
+
+#define BTA_HL_ECHO_TEST_MDEP_ID        0
+#define BTA_HL_ECHO_TEST_MDEP_CFG_IDX   0
+
+#define BTA_HL_INVALID_MDEP_ID     0xFF
+typedef tMCA_DEP tBTA_HL_MDEP_ID; /* 0 is for echo test,
+                                   0x01-0x7F availave for use,
+                                   0x80-0xFF reserved*/
+
+
+#define BTA_HL_DELETE_ALL_MDL_IDS   0xFFFF
+#define BTA_HL_MAX_MDL_VAL          0xFEFF
+typedef UINT16 tBTA_HL_MDL_ID;  /* 0x0000 reserved,
+                                   0x0001-0xFEFF dynamic range,
+                                   0xFF00-0xFFFE reserved,
+                                   0xFFFF indicates all MDLs*/
+
+#define BTA_HL_MDEP_DESP_LEN       35
+
+#define BTA_HL_DCH_MODE_RELIABLE    0
+#define BTA_HL_DCH_MODE_STREAMING   1
+
+typedef UINT8 tBTA_HL_DCH_MODE;
+
+#define BTA_HL_DCH_CFG_NO_PREF      0
+#define BTA_HL_DCH_CFG_RELIABLE     1
+#define BTA_HL_DCH_CFG_STREAMING    2
+#define BTA_HL_DCH_CFG_UNKNOWN      0xFF
+
+typedef UINT8 tBTA_HL_DCH_CFG;
+
+/* The Default DCH CFG for the echo test when the device is a Source */
+#define BTA_HL_DEFAULT_ECHO_TEST_SRC_DCH_CFG BTA_HL_DCH_CFG_RELIABLE
+
+#define BTA_HL_DCH_CREATE_RSP_SUCCESS 0
+#define BTA_HL_DCH_CREATE_RSP_CFG_REJ 1
+
+typedef UINT8 tBTA_HL_DCH_CREATE_RSP;
+
+#define BTA_HL_MCAP_SUP_PROC_RECONNECT_INIT 0x02
+#define BTA_HL_MCAP_SUP_PROC_RECONNECT_APT  0x04
+#define BTA_HL_MCAP_SUP_PROC_CSP_SLAVE      0x08
+#define BTA_HL_MCAP_SUP_PROC_CSP_MASTER     0x10
+
+typedef UINT8 tBTA_HL_SUP_PROC_MASK;
+
+typedef struct
+{
+    UINT16                  max_rx_apdu_size;  /* local rcv MTU */
+    UINT16                  max_tx_apdu_size;  /* maximum TX APDU size*/
+} tBTA_HL_ECHO_CFG;
+
+
+typedef struct
+{
+    UINT16                  data_type;
+    UINT16                  max_rx_apdu_size;  /* local rcv MTU */
+    UINT16                  max_tx_apdu_size;  /* maximum TX APDU size*/
+    char                    desp[BTA_HL_MDEP_DESP_LEN+1];
+} tBTA_HL_MDEP_DATA_TYPE_CFG;
+
+
+typedef struct
+{
+    tBTA_HL_MDEP_ROLE           mdep_role;
+    UINT8                       num_of_mdep_data_types;
+    tBTA_HL_MDEP_DATA_TYPE_CFG  data_cfg[BTA_HL_NUM_DATA_TYPES];
+} tBTA_HL_MDEP_CFG;
+
+typedef struct
+{
+    tBTA_HL_MDEP_ID         mdep_id;  /* MDEP ID 0x01-0x7F */
+    tBTA_HL_MDEP_CFG        mdep_cfg;
+} tBTA_HL_MDEP;
+
+typedef struct
+{
+    tBTA_HL_MDEP            mdep[BTA_HL_NUM_MDEPS];
+    tBTA_HL_ECHO_CFG        echo_cfg;
+    tBTA_HL_MDEP_ROLE_MASK  app_role_mask;
+    BOOLEAN                 advertize_source_sdp;
+    UINT8                   num_of_mdeps;
+} tBTA_HL_SUP_FEATURE;
+
+typedef struct
+{
+    BOOLEAN                 delete_req_pending;
+    tBTA_HL_MDL_ID          mdl_id;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+} tBTA_HL_DELETE_MDL;
+
+typedef struct
+{
+    UINT8                   time;
+    UINT16                  mtu;
+    tBTA_HL_MDL_ID          mdl_id;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    tBTA_HL_MDEP_ROLE       local_mdep_role;
+    BOOLEAN                 active;     /* true if this item is in use */
+    tBTA_HL_DCH_MODE        dch_mode;
+    UINT8                   fcs;
+    BD_ADDR                 peer_bd_addr;
+} tBTA_HL_MDL_CFG;
+
+
+/* Maximum number of supported feature list items (list_elem in tSDP_SUP_FEATURE_ELEM) */
+#define BTA_HL_NUM_SUP_FEATURE_ELEMS     10
+#define BTA_HL_SUP_FEATURE_SDP_BUF_SIZE  512
+/* This structure is used to add supported feature lists and find supported feature elements */
+typedef struct
+{
+    UINT8       mdep_id;
+    UINT16      data_type;
+    tBTA_HL_MDEP_ROLE       mdep_role;
+    char        *p_mdep_desp;
+} tBTA_HL_SUP_FEATURE_ELEM;
+
+typedef struct
+{
+    UINT16                      num_elems;
+    tBTA_HL_SUP_FEATURE_ELEM   list_elem[BTA_HL_NUM_SUP_FEATURE_ELEMS];
+} tBTA_HL_SUP_FEATURE_LIST_ELEM;
+
+
+typedef struct
+{
+    tBTA_HL_DEVICE_TYPE     dev_type;           /* sink, source or dual roles */
+    tBTA_SEC                sec_mask;           /* security mask for accepting conenction*/
+    const char              *p_srv_name;        /* service name to be used in the SDP; null terminated*/
+    const char              *p_srv_desp;        /* service description to be used in the SDP; null terminated */
+    const char              *p_provider_name;   /* provide name to be used in the SDP; null terminated */
+} tBTA_HL_REG_PARAM;
+
+typedef struct
+{
+    UINT16                  ctrl_psm;
+    BD_ADDR                 bd_addr;           /* Address of peer device */
+    tBTA_SEC                sec_mask;          /* security mask for initiating connection*/
+} tBTA_HL_CCH_OPEN_PARAM;
+
+
+typedef struct
+{
+    UINT16                  ctrl_psm;
+    tBTA_HL_MDEP_ID         local_mdep_id;     /* local MDEP ID */
+    tBTA_HL_MDEP_ID         peer_mdep_id;      /* peer mdep id */
+    tBTA_HL_DCH_CFG         local_cfg;
+    tBTA_SEC                sec_mask;          /* security mask for initiating connection*/
+} tBTA_HL_DCH_OPEN_PARAM;
+
+
+typedef struct
+{
+    UINT16                  ctrl_psm;
+    tBTA_HL_MDL_ID          mdl_id;
+} tBTA_HL_DCH_RECONNECT_PARAM;
+
+
+typedef struct
+{
+    UINT16                  ctrl_psm;
+    UINT16                  pkt_size;
+    tBTA_HL_DCH_CFG         local_cfg;
+} tBTA_HL_DCH_ECHO_TEST_PARAM;
+
+typedef struct
+{
+    UINT16                  buf_size;
+    UINT8                   p_buf;        /* buffer pointer */
+} tBTA_HL_DCH_BUF_INFO;
+
+typedef struct
+{
+    tBTA_HL_MDEP_ID         local_mdep_id;  /* local MDEP ID */
+    tBTA_HL_MDL_ID          mdl_id;
+    tBTA_HL_DCH_CREATE_RSP  rsp_code;
+    tBTA_HL_DCH_CFG         cfg_rsp;
+} tBTA_HL_DCH_CREATE_RSP_PARAM;
+
+typedef struct
+{
+    UINT16              data_type;
+    UINT8               mdep_id;
+    tBTA_HL_MDEP_ROLE   mdep_role;
+    char                mdep_desp[BTA_HL_MDEP_DESP_LEN+1];
+}tBTA_HL_SDP_MDEP_CFG;
+
+typedef struct
+{
+    UINT16                  ctrl_psm;
+    UINT16                  data_psm;
+    UINT8                   mcap_sup_proc;
+    UINT8                   num_mdeps; /* number of mdep elements from SDP*/
+    char                    srv_name[BTA_SERVICE_NAME_LEN+1];
+    char                    srv_desp[BTA_SERVICE_DESP_LEN+1];
+    char                    provider_name[BTA_PROVIDER_NAME_LEN+1];
+    tBTA_HL_SDP_MDEP_CFG    mdep_cfg[BTA_HL_NUM_SDP_MDEPS];
+} tBTA_HL_SDP_REC;
+
+typedef struct
+{
+    UINT8                num_recs;
+    tBTA_HL_SDP_REC      sdp_rec[BTA_HL_NUM_SDP_RECS];
+} tBTA_HL_SDP;
+
+/* HL control callback function events */
+enum
+{
+    BTA_HL_CTRL_ENABLE_CFM_EVT            = 0,
+    BTA_HL_CTRL_DISABLE_CFM_EVT
+};
+typedef UINT8 tBTA_HL_CTRL_EVT;
+/* Structure associated with BTA_HL_ENABLE_EVT
+   BTA_HL_DISABLE_EVT */
+
+typedef struct
+{
+    tBTA_HL_STATUS  status;
+} tBTA_HL_CTRL_ENABLE_DISABLE;
+
+typedef union
+{
+    tBTA_HL_CTRL_ENABLE_DISABLE  enable_cfm;
+    tBTA_HL_CTRL_ENABLE_DISABLE  disable_cfm;
+} tBTA_HL_CTRL;
+
+/* HL instance callback function events */
+enum
+{
+    BTA_HL_REGISTER_CFM_EVT           =0,
+    BTA_HL_DEREGISTER_CFM_EVT,
+    BTA_HL_CCH_OPEN_IND_EVT,
+    BTA_HL_CCH_OPEN_CFM_EVT,
+    BTA_HL_CCH_CLOSE_IND_EVT,
+    BTA_HL_CCH_CLOSE_CFM_EVT,
+    BTA_HL_DCH_CREATE_IND_EVT,
+    BTA_HL_DCH_OPEN_IND_EVT,
+    BTA_HL_DCH_OPEN_CFM_EVT,
+    BTA_HL_DCH_CLOSE_IND_EVT,
+    BTA_HL_DCH_CLOSE_CFM_EVT,
+    BTA_HL_DCH_RECONNECT_IND_EVT,
+    BTA_HL_DCH_RECONNECT_CFM_EVT,
+
+    BTA_HL_DCH_ABORT_IND_EVT,
+    BTA_HL_DCH_ABORT_CFM_EVT,
+    BTA_HL_DELETE_MDL_IND_EVT,
+    BTA_HL_DELETE_MDL_CFM_EVT,
+    BTA_HL_DCH_SEND_DATA_CFM_EVT,
+    BTA_HL_DCH_RCV_DATA_IND_EVT,
+    BTA_HL_CONG_CHG_IND_EVT,
+    BTA_HL_DCH_ECHO_TEST_CFM_EVT,
+    BTA_HL_SDP_QUERY_CFM_EVT,
+    BTA_HL_SDP_INFO_IND_EVT
+};
+typedef UINT8 tBTA_HL_EVT;
+
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;        /* start status */
+    UINT8                   app_id;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_REGISTER_CFM;
+
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;        /* start status */
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_DEREGISTER_CFM;
+
+
+typedef struct
+{
+    BOOLEAN                 intentional;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_CCH_CLOSE_IND;
+
+
+typedef struct
+{
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_MCL_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;             /* connection status */
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_MCL_CFM;
+
+typedef struct
+{
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    BD_ADDR                 bd_addr; /* address of peer device */
+} tBTA_HL_CCH_OPEN_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;             /* connection status */
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    BD_ADDR                 bd_addr;            /* address of peer device */
+} tBTA_HL_CCH_OPEN_CFM;
+
+typedef struct
+{
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    tBTA_HL_MDL_ID          mdl_id;             /* MCAP data link ID for this
+                                                   data channel conenction    */
+    tBTA_HL_DCH_CFG         cfg;                /* dch cfg requested by the peer device */
+} tBTA_HL_DCH_CREATE_IND;
+
+typedef struct
+{
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    tBTA_HL_MDL_ID          mdl_id;             /* MCAP data link ID for this
+                                                   data channel conenction    */
+    tBTA_HL_DCH_MODE        dch_mode;           /* data channel mode - reliable or streaming*/
+
+    BOOLEAN                 first_reliable;  /* whether this is the first reliable data channel */
+    UINT16                  mtu;
+} tBTA_HL_DCH_OPEN_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;             /* connection status */
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    tBTA_HL_MDL_ID          mdl_id;             /* MCAP data link ID for this
+                                                   data channel conenction    */
+    tBTA_HL_DCH_MODE        dch_mode;           /* data channel mode - reliable or streaming*/
+    BOOLEAN                 first_reliable;     /* whether this is the first reliable data channel */
+    UINT16                  mtu;
+} tBTA_HL_DCH_OPEN_CFM;
+
+
+typedef struct
+{
+    BOOLEAN                 intentional;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_DCH_CLOSE_IND;
+
+
+typedef struct
+{
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_MDL_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+} tBTA_HL_MDL_CFM;
+
+typedef struct
+{
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    tBTA_HL_MDL_ID          mdl_id;
+} tBTA_HL_DELETE_MDL_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    tBTA_HL_MDL_ID          mdl_id;
+} tBTA_HL_DELETE_MDL_CFM;
+
+typedef struct
+{
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    tBTA_HL_APP_HANDLE      app_handle;
+    BOOLEAN                 cong;
+} tBTA_HL_DCH_CONG_IND;
+
+typedef struct
+{
+    tBTA_HL_APP_HANDLE      app_handle;
+    UINT16                  ctrl_psm;
+    UINT16                  data_psm;
+    UINT8                   data_x_spec;
+    UINT8                   mcap_sup_procs;
+} tBTA_HL_SDP_INFO_IND;
+
+typedef struct
+{
+    tBTA_HL_STATUS          status;
+    tBTA_HL_APP_HANDLE      app_handle;
+    BD_ADDR                 bd_addr;
+    tBTA_HL_SDP             *p_sdp;
+} tBTA_HL_SDP_QUERY_CFM;
+
+typedef union
+{
+    tBTA_HL_REGISTER_CFM        reg_cfm;
+    tBTA_HL_DEREGISTER_CFM      dereg_cfm;
+    tBTA_HL_CCH_OPEN_IND        cch_open_ind;
+    tBTA_HL_CCH_OPEN_CFM        cch_open_cfm;
+    tBTA_HL_CCH_CLOSE_IND       cch_close_ind;
+    tBTA_HL_MCL_CFM             cch_close_cfm;
+    tBTA_HL_DCH_CREATE_IND      dch_create_ind;
+    tBTA_HL_DCH_OPEN_IND        dch_open_ind;
+    tBTA_HL_DCH_OPEN_CFM        dch_open_cfm;
+    tBTA_HL_DCH_CLOSE_IND       dch_close_ind;
+    tBTA_HL_MDL_CFM             dch_close_cfm;
+    tBTA_HL_DCH_OPEN_IND        dch_reconnect_ind;
+    tBTA_HL_DCH_OPEN_CFM        dch_reconnect_cfm;
+    tBTA_HL_MCL_IND             dch_abort_ind;
+    tBTA_HL_MCL_CFM             dch_abort_cfm;
+    tBTA_HL_DELETE_MDL_IND      delete_mdl_ind;
+    tBTA_HL_DELETE_MDL_CFM      delete_mdl_cfm;
+    tBTA_HL_MDL_CFM             dch_send_data_cfm;
+    tBTA_HL_MDL_IND             dch_rcv_data_ind;
+    tBTA_HL_DCH_CONG_IND        dch_cong_ind;
+    tBTA_HL_MCL_CFM             echo_test_cfm;
+    tBTA_HL_SDP_QUERY_CFM       sdp_query_cfm;
+    tBTA_HL_SDP_INFO_IND        sdp_info_ind;
+
+} tBTA_HL;
+
+/* HL callback functions */
+typedef void tBTA_HL_CTRL_CBACK(tBTA_HL_CTRL_EVT event, tBTA_HL_CTRL *p_data);
+typedef void tBTA_HL_CBACK(tBTA_HL_EVT event, tBTA_HL *p_data);
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/**************************
+**  API Functions
+***************************/
+
+/*******************************************************************************
+**
+** Function         BTA_HlEnable
+**
+** Description      Enable the HL subsystems.  This function must be
+**                  called before any other functions in the HL API are called.
+**                  When the enable operation is completed the callback function
+**                  will be called with an BTA_HL_CTRL_ENABLE_CFM_EVT event.
+**
+** Parameters       p_cback - HL event call back function
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlEnable(tBTA_HL_CTRL_CBACK *p_ctrl_cback);
+/*******************************************************************************
+**
+** Function         BTA_HlDisable
+**
+** Description     Disable the HL subsystem.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDisable(void);
+/*******************************************************************************
+**
+** Function         BTA_HlRegister
+**
+** Description      Register a HDP application
+**
+**
+** Parameters       app_id        - hdp application ID
+**                  p_reg_param   - non-platform related parameters for the
+**                                  HDP application
+**                  p_cback       - HL event callback fucntion
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlRegister(UINT8  app_id,
+                                       tBTA_HL_REG_PARAM *p_reg_param,
+                                       tBTA_HL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_HlDeregister
+**
+** Description      Deregister an HDP application
+**
+** Parameters       app_handle - Application handle
+**
+** Returns         void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDeregister(tBTA_HL_APP_HANDLE app_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HlCchOpen
+**
+** Description      Open a Control channel connection with the specified BD address
+**                  and the control PSM value is used to select which
+**                  HDP insatnce should be used in case the peer device support
+**                  multiple HDP instances.
+**
+**
+** Parameters       app_handle - Application Handle
+**                  p_open_param - parameters for opening a control channel
+**
+** Returns          void
+**
+**                  Note: If the control PSM value is zero then the first HDP
+**                        instance is used for the control channel setup
+*******************************************************************************/
+    BTA_API extern void BTA_HlCchOpen(tBTA_HL_APP_HANDLE app_handle,
+                                      tBTA_HL_CCH_OPEN_PARAM *p_open_param);
+
+/*******************************************************************************
+**
+** Function         BTA_HlCchClose
+**
+** Description      Close a Control channel connection with the specified MCL
+**                  handle
+**
+** Parameters       mcl_handle - MCL handle
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern  void BTA_HlCchClose(tBTA_HL_MCL_HANDLE mcl_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchOpen
+**
+** Description      Open a data channel connection with the specified DCH parameters
+**
+** Parameters       mcl_handle - MCL handle
+**                  p_open_param - parameters for opening a data channel
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern  void BTA_HlDchOpen(tBTA_HL_MCL_HANDLE mcl_handle,
+                                       tBTA_HL_DCH_OPEN_PARAM *p_open_param);
+/*******************************************************************************
+**
+** Function         BTA_HlDchReconnect
+**
+** Description      Reconnect a data channel with the specified MDL_ID
+**
+** Parameters       mcl_handle      - MCL handle
+*8                  p_recon_param   - parameters for reconnecting a data channel
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDchReconnect(tBTA_HL_MCL_HANDLE mcl_handle,
+                                            tBTA_HL_DCH_RECONNECT_PARAM *p_recon_param);
+/*******************************************************************************
+**
+** Function         BTA_HlDchClose
+**
+** Description      Close a data channel with the specified MDL handle
+**
+** Parameters       mdl_handle  - MDL handle
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDchClose(tBTA_HL_MDL_HANDLE mdl_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchAbort
+**
+** Description      Abort the current data channel setup with the specified MCL
+**                  handle
+**
+** Parameters       mcl_handle  - MCL handle
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDchAbort(tBTA_HL_MCL_HANDLE mcl_handle);
+
+/*******************************************************************************
+**
+** Function         BTA_HlSendData
+**
+** Description      Send an APDU to the peer device
+**
+** Parameters       mdl_handle  - MDL handle
+**                  pkt_size    - size of the data packet to be sent
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlSendData(tBTA_HL_MDL_HANDLE mdl_handle,
+                                       UINT16           pkt_size);
+
+/*******************************************************************************
+**
+** Function         BTA_HlDeleteMdl
+**
+** Description      Delete the specified MDL_ID within the specified MCL handle
+**
+** Parameters       mcl_handle  - MCL handle
+**                  mdl_id      - MDL ID
+**
+** Returns          void
+**
+**                  note: If mdl_id = 0xFFFF then this means to delete all MDLs
+**                        and this value can only be used with DeleteMdl request only
+**                        not other requests
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDeleteMdl(tBTA_HL_MCL_HANDLE mcl_handle,
+                                        tBTA_HL_MDL_ID mdl_id );
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchEchoTest
+**
+** Description      Initiate an echo test with the specified MCL handle
+**
+** Parameters       mcl_handle           - MCL handle
+*8                  p_echo_test_param   -  parameters for echo testing
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDchEchoTest( tBTA_HL_MCL_HANDLE  mcl_handle,
+                                           tBTA_HL_DCH_ECHO_TEST_PARAM *p_echo_test_param);
+
+/*******************************************************************************
+**
+** Function         BTA_HlSdpQuery
+**
+** Description      SDP query request for the specified BD address
+**
+** Parameters       app_handle      - application handle
+**                  bd_addr         - BD address
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern  void BTA_HlSdpQuery(tBTA_HL_APP_HANDLE app_handle,
+                                        BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_HlDchCreateMdlRsp
+**
+** Description      Set the Response and configuration values for the Create MDL
+**                  request
+**
+** Parameters       mcl_handle  - MCL handle
+**                  p_rsp_param - parameters specified whether the request should
+**                                be accepted or not and if it should be accepted
+**                                then it also specified the configuration response
+**                                value
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTA_API extern void BTA_HlDchCreateRsp(tBTA_HL_MCL_HANDLE mcl_handle,
+                                           tBTA_HL_DCH_CREATE_RSP_PARAM *p_rsp_param);
+
+
+
+#ifdef __cplusplus
+
+}
+#endif
+
+#endif /* BTA_HL_API_H */
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/bta/include/bta_hl_ci.h b/bta/include/bta_hl_ci.h
new file mode 100644
index 0000000..4d3951c
--- /dev/null
+++ b/bta/include/bta_hl_ci.h
@@ -0,0 +1,125 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for the HL (HeaLth device profile) subsystem
+ *  call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_HL_CI_H
+#define BTA_HL_CI_H
+
+#include "bta_api.h"
+#include "bta_hl_api.h"
+
+
+/*****************************************************************************
+**  Constants and Data Types
+*****************************************************************************/
+/**************************
+**  Common Definitions
+***************************/
+/* Read Ready Event */
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+/**************************
+**  Common Functions
+***************************/
+/*******************************************************************************
+**
+** Function         bta_hl_ci_get_tx_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_get_tx_data call-out function.
+**
+** Parameters       mdl_handle -MDL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern  void bta_hl_ci_get_tx_data(  tBTA_HL_MDL_HANDLE mdl_handle,
+                                             tBTA_HL_STATUS status,
+                                             UINT16 evt );
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_put_rx_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_put_rx_data call-out function.
+**
+** Parameters       mdl_handle -MDL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern  void bta_hl_ci_put_rx_data(  tBTA_HL_MDL_HANDLE mdl_handle,
+                                             tBTA_HL_STATUS status,
+                                             UINT16 evt );
+
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_get_echo_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_get_echo_data call-out function.
+**
+** Parameters       mcl_handle -MCL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern  void bta_hl_ci_get_echo_data(  tBTA_HL_MCL_HANDLE mcl_handle,
+                                               tBTA_HL_STATUS status,
+                                               UINT16 evt );
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_ci_put_echo_data
+**
+** Description      This function is called in response to the
+**                  bta_hl_co_put_echo_data call-out function.
+**
+** Parameters       mcl_handle -MCL handle
+**                  status - BTA_MA_STATUS_OK if operation is successful
+**                           BTA_MA_STATUS_FAIL if any errors have occurred.
+**                  evt    - evt from the call-out function
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_ci_put_echo_data(  tBTA_HL_MCL_HANDLE mcl_handle,
+                                              tBTA_HL_STATUS status,
+                                              UINT16 evt );
+#endif /* BTA_HL_CI_H */
+
+
diff --git a/bta/include/bta_hl_co.h b/bta/include/bta_hl_co.h
new file mode 100644
index 0000000..46f8290
--- /dev/null
+++ b/bta/include/bta_hl_co.h
@@ -0,0 +1,232 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for the HL (HeaLth device profile) subsystem
+ *  call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_HL_CO_H
+#define BTA_HL_CO_H
+
+#include "bta_api.h"
+#include "bta_hl_api.h"
+
+/*****************************************************************************
+**  Constants and Data Types
+*****************************************************************************/
+/**************************
+**  Common Definitions
+***************************/
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_num_of_mdep
+**
+** Description     This function is called to get the number of MDEPs for this
+**                 application ID
+**
+** Parameters      app_id - application ID
+**                 p_num_of_mdep (output) - number of MDEP configurations supported
+**                                          by the application
+**
+** Returns         Bloolean - TRUE success
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_hl_co_get_num_of_mdep(UINT8 app_id, UINT8 *p_num_of_mdep);
+/*******************************************************************************
+**
+** Function        bta_hl_co_advrtise_source_sdp
+**
+** Description     This function is called to find out whether the SOURCE MDEP
+**                 configuration information should be advertize in the SDP or nopt
+**
+** Parameters      app_id - application ID
+**
+** Returns         Bloolean - TRUE advertise the SOURCE MDEP configuration
+**                            information
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_hl_co_advrtise_source_sdp(UINT8 app_id);
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_mdep_config
+**
+** Description     This function is called to get the supported feature
+**                 configuration for the specified mdep index and it also assigns
+**                 the MDEP ID for the specified mdep index
+**
+** Parameters      app_id - HDP application ID
+**                 mdep_idx - the mdep index
+**                 mdep_id  - the assigned MDEP ID for the specified medp_idx
+**                 p_mdl_cfg (output) - pointer to the MDEP configuration
+**
+**
+** Returns         Bloolean - TRUE success
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_hl_co_get_mdep_config(UINT8 app_id,
+                                                 UINT8 mdep_idx,
+                                                 tBTA_HL_MDEP_ID mdep_id,
+                                                 tBTA_HL_MDEP_CFG *p_mdep_cfg);
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_echo_config
+**
+** Description     This function is called to get the echo test
+**                 maximum APDU size configuration
+**
+** Parameters      app_id - HDP application ID
+**                 p_echo_cfg (output) - pointer to the Echo test maximum APDU size
+**                                       configuration
+**
+** Returns         Bloolean - TRUE success
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_hl_co_get_echo_config(UINT8  app_id,
+                                                 tBTA_HL_ECHO_CFG *p_echo_cfg);
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_save_mdl
+**
+** Description     This function is called to save a MDL configuration item in persistent
+**                 storage
+**
+** Parameters      app_id - HDP application ID
+**                 item_idx - the MDL configuration storage index
+**                 p_mdl_cfg - pointer to the MDL configuration data
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_save_mdl(UINT8 app_id, UINT8 item_idx, tBTA_HL_MDL_CFG *p_mdl_cfg );
+/*******************************************************************************
+**
+** Function        bta_hl_co_delete_mdl
+**
+** Description     This function is called to delete a MDL configuration item in persistent
+**                 storage
+**
+** Parameters      app_id - HDP application ID
+**                 item_idx - the MDL configuration storage index
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_delete_mdl(UINT8 app_id, UINT8 item_idx);
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_mdl_config
+**
+** Description     This function is called to get the MDL configuration
+**                 from teh persistent memory. This function shall only be called
+*8                 once after the device is powered up
+**
+** Parameters      app_id - HDP application ID
+**                 buffer_size - the unit of the buffer size is sizeof(tBTA_HL_MDL_CFG)
+**                 p_mdl_buf - Point to the starting location of the buffer
+**
+** Returns         BOOLEAN
+**
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN bta_hl_co_load_mdl_config (UINT8 app_id, UINT8 buffer_size,
+                                                  tBTA_HL_MDL_CFG *p_mdl_buf );
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_tx_data
+**
+** Description     Get the data to be sent
+**
+** Parameters      app_id - HDP application ID
+**                 mdl_handle - MDL handle
+**                 buf_size - the size of the buffer
+**                 p_buf - the buffer pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_get_tx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_get_tx_data (UINT8 app_id, tBTA_HL_MDL_HANDLE mdl_handle,
+                                           UINT16 buf_size, UINT8 *p_buf, UINT16 evt);
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_put_rx_data
+**
+** Description     Put the received data
+**
+** Parameters      app_id - HDP application ID
+**                 mdl_handle - MDL handle
+**                 data_size - the size of the data
+**                 p_data - the data pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_put_rx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_put_rx_data (UINT8 app_id, tBTA_HL_MDL_HANDLE mdl_handle,
+                                           UINT16 data_size, UINT8 *p_data, UINT16 evt);
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_tx_data
+**
+** Description     Get the Echo data to be sent
+**
+** Parameters      app_id - HDP application ID
+**                 mcl_handle - MCL handle
+**                 buf_size - the size of the buffer
+**                 p_buf - the buffer pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_get_tx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_get_echo_data (UINT8 app_id, tBTA_HL_MCL_HANDLE mcl_handle,
+                                             UINT16 buf_size, UINT8 *p_buf, UINT16 evt);
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_put_echo_data
+**
+** Description     Put the received loopback echo data
+**
+** Parameters      app_id - HDP application ID
+**                 mcl_handle - MCL handle
+**                 data_size - the size of the data
+**                 p_data - the data pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_put_echo_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+BTA_API extern void bta_hl_co_put_echo_data (UINT8 app_id, tBTA_HL_MCL_HANDLE mcl_handle,
+                                             UINT16 data_size, UINT8 *p_data, UINT16 evt);
+
+#endif /* BTA_HL_CO_H */
diff --git a/bta/include/bta_jv_api.h b/bta/include/bta_jv_api.h
new file mode 100644
index 0000000..73a9164
--- /dev/null
+++ b/bta/include/bta_jv_api.h
@@ -0,0 +1,1122 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file the BTA Java I/F
+ *
+ ******************************************************************************/
+#ifndef BTA_JV_API_H
+#define BTA_JV_API_H
+
+#include "data_types.h"
+#include "bt_target.h"
+#include "bt_types.h"
+#include "bta_api.h"
+#include "btm_api.h"
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/* status values */
+#define BTA_JV_SUCCESS             0            /* Successful operation. */
+#define BTA_JV_FAILURE             1            /* Generic failure. */
+#define BTA_JV_BUSY                2            /* Temporarily can not handle this request. */
+#define BTA_JV_NO_DATA             3            /* no data. */
+
+typedef UINT8 tBTA_JV_STATUS;
+#define BTA_JV_INTERNAL_ERR        (-1) /* internal error. */
+
+#define BTA_JV_MAX_UUIDS        SDP_MAX_UUID_FILTERS
+#define BTA_JV_MAX_ATTRS        SDP_MAX_ATTR_FILTERS
+#define BTA_JV_MAX_SDP_REC      SDP_MAX_RECORDS
+#if SDP_FOR_JV_INCLUDED == TRUE
+#define BTA_JV_MAX_L2C_CONN     (GAP_MAX_CONNECTIONS + 1)
+#else
+#define BTA_JV_MAX_L2C_CONN     GAP_MAX_CONNECTIONS
+#endif
+#define BTA_JV_MAX_SCN          PORT_MAX_RFC_PORTS /* same as BTM_MAX_SCN (in btm_int.h) */
+#define BTA_JV_MAX_RFC_CONN     MAX_RFC_PORTS
+
+#ifndef BTA_JV_DEF_RFC_MTU
+#define BTA_JV_DEF_RFC_MTU      (3*330)
+#endif
+
+/* */
+#ifndef BTA_JV_MAX_RFC_SR_SESSION
+#define BTA_JV_MAX_RFC_SR_SESSION   3
+#endif
+
+/* BTA_JV_MAX_RFC_SR_SESSION can not be bigger than MAX_BD_CONNECTIONS */
+#if (BTA_JV_MAX_RFC_SR_SESSION > MAX_BD_CONNECTIONS)
+#undef BTA_JV_MAX_RFC_SR_SESSION
+#define BTA_JV_MAX_RFC_SR_SESSION   MAX_BD_CONNECTIONS
+#endif
+
+#define BTA_JV_FIRST_SERVICE_ID BTA_FIRST_JV_SERVICE_ID
+#define BTA_JV_LAST_SERVICE_ID  BTA_LAST_JV_SERVICE_ID
+#define BTA_JV_NUM_SERVICE_ID   (BTA_LAST_JV_SERVICE_ID - BTA_FIRST_JV_SERVICE_ID + 1)
+
+/* Discoverable modes */
+enum
+{
+    BTA_JV_DISC_NONE,
+    BTA_JV_DISC_LIMITED,
+    BTA_JV_DISC_GENERAL
+};
+typedef UINT16 tBTA_JV_DISC;
+
+/* Security Mode (BTA_JvGetSecurityMode) */
+#define BTA_JV_SEC_MODE_UNDEFINED   BTM_SEC_MODE_UNDEFINED  /* 0 */
+#define BTA_JV_SEC_MODE_NONE        BTM_SEC_MODE_NONE       /* 1 */
+#define BTA_JV_SEC_MODE_SERVICE     BTM_SEC_MODE_SERVICE    /* 2 */
+#define BTA_JV_SEC_MODE_LINK        BTM_SEC_MODE_LINK       /* 3 */
+#define BTA_JV_SEC_MODE_SP          BTM_SEC_MODE_SP         /* 4 */
+#define BTA_JV_SEC_MODE_SP_DEBUG    BTM_SEC_MODE_SP_DEBUG   /* 5 */
+typedef UINT8 tBTA_JV_SEC_MODE;
+
+#define BTA_JV_ROLE_SLAVE       BTM_ROLE_SLAVE
+#define BTA_JV_ROLE_MASTER      BTM_ROLE_MASTER
+typedef UINT32 tBTA_JV_ROLE;
+
+#define BTA_JV_SERVICE_LMTD_DISCOVER    BTM_COD_SERVICE_LMTD_DISCOVER   /* 0x0020 */
+#define BTA_JV_SERVICE_POSITIONING      BTM_COD_SERVICE_POSITIONING     /* 0x0100 */
+#define BTA_JV_SERVICE_NETWORKING       BTM_COD_SERVICE_NETWORKING      /* 0x0200 */
+#define BTA_JV_SERVICE_RENDERING        BTM_COD_SERVICE_RENDERING       /* 0x0400 */
+#define BTA_JV_SERVICE_CAPTURING        BTM_COD_SERVICE_CAPTURING       /* 0x0800 */
+#define BTA_JV_SERVICE_OBJ_TRANSFER     BTM_COD_SERVICE_OBJ_TRANSFER    /* 0x1000 */
+#define BTA_JV_SERVICE_AUDIO            BTM_COD_SERVICE_AUDIO           /* 0x2000 */
+#define BTA_JV_SERVICE_TELEPHONY        BTM_COD_SERVICE_TELEPHONY       /* 0x4000 */
+#define BTA_JV_SERVICE_INFORMATION      BTM_COD_SERVICE_INFORMATION     /* 0x8000 */
+
+
+
+/* Java I/F callback events */
+/* events received by tBTA_JV_DM_CBACK */
+#define BTA_JV_ENABLE_EVT           0  /* JV enabled */
+#define BTA_JV_SET_DISCOVER_EVT     1  /* the result for BTA_JvSetDiscoverability */
+#define BTA_JV_LOCAL_ADDR_EVT       2  /* Local device address */
+#define BTA_JV_LOCAL_NAME_EVT       3  /* Local device name */
+#define BTA_JV_REMOTE_NAME_EVT      4  /* Remote device name */
+#define BTA_JV_SET_ENCRYPTION_EVT   5  /* Set Encryption */
+#define BTA_JV_GET_SCN_EVT          6  /* Reserved an SCN */
+#define BTA_JV_GET_PSM_EVT          7  /* Reserved a PSM */
+#define BTA_JV_DISCOVERY_COMP_EVT   8  /* SDP discovery complete */
+#define BTA_JV_SERVICES_LEN_EVT     9  /* the result for BTA_JvGetServicesLength */
+#define BTA_JV_SERVICE_SEL_EVT      10 /* the result for BTA_JvServiceSelect */
+#define BTA_JV_CREATE_RECORD_EVT    11 /* the result for BTA_JvCreateRecord */
+#define BTA_JV_UPDATE_RECORD_EVT    12 /* the result for BTA_JvUpdateRecord */
+#define BTA_JV_ADD_ATTR_EVT         13 /* the result for BTA_JvAddAttribute */
+#define BTA_JV_DELETE_ATTR_EVT      14 /* the result for BTA_JvDeleteAttribute */
+#define BTA_JV_CANCEL_DISCVRY_EVT   15 /* the result for BTA_JvCancelDiscovery */
+
+/* events received by tBTA_JV_L2CAP_CBACK */
+#define BTA_JV_L2CAP_OPEN_EVT       16 /* open status of L2CAP connection */
+#define BTA_JV_L2CAP_CLOSE_EVT      17 /* L2CAP connection closed */
+#define BTA_JV_L2CAP_START_EVT      18 /* L2CAP server started */
+#define BTA_JV_L2CAP_CL_INIT_EVT    19 /* L2CAP client initiated a connection */
+#define BTA_JV_L2CAP_DATA_IND_EVT   20 /* L2CAP connection received data */
+#define BTA_JV_L2CAP_CONG_EVT       21 /* L2CAP connection congestion status changed */
+#define BTA_JV_L2CAP_READ_EVT       22 /* the result for BTA_JvL2capRead */
+#define BTA_JV_L2CAP_RECEIVE_EVT    23 /* the result for BTA_JvL2capReceive*/
+#define BTA_JV_L2CAP_WRITE_EVT      24 /* the result for BTA_JvL2capWrite*/
+
+/* events received by tBTA_JV_RFCOMM_CBACK */
+#define BTA_JV_RFCOMM_OPEN_EVT      25 /* open status of RFCOMM Client connection */
+#define BTA_JV_RFCOMM_CLOSE_EVT     26 /* RFCOMM connection closed */
+#define BTA_JV_RFCOMM_START_EVT     27 /* RFCOMM server started */
+#define BTA_JV_RFCOMM_CL_INIT_EVT   28 /* RFCOMM client initiated a connection */
+#define BTA_JV_RFCOMM_DATA_IND_EVT  29 /* RFCOMM connection received data */
+#define BTA_JV_RFCOMM_CONG_EVT      30 /* RFCOMM connection congestion status changed */
+#define BTA_JV_RFCOMM_READ_EVT      31 /* the result for BTA_JvRfcommRead */
+#define BTA_JV_RFCOMM_WRITE_EVT     32 /* the result for BTA_JvRfcommWrite*/
+#define BTA_JV_RFCOMM_SRV_OPEN_EVT  33 /* open status of Server RFCOMM connection */
+#define BTA_JV_MAX_EVT              34 /* max number of JV events */
+
+typedef UINT16 tBTA_JV_EVT;
+
+/* data associated with BTA_JV_SET_DISCOVER_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    tBTA_JV_DISC    disc_mode;  /* The current discoverable mode */
+} tBTA_JV_SET_DISCOVER;
+
+/* data associated with BTA_JV_DISCOVERY_COMP_EVT_ */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    int scn;                    /* channel # */
+} tBTA_JV_DISCOVERY_COMP;
+
+/* data associated with BTA_JV_SET_ENCRYPTION_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    BD_ADDR     bd_addr;        /* The peer address */
+} tBTA_JV_SET_ENCRYPTION;
+
+/* data associated with BTA_JV_SERVICES_LEN_EVT */
+typedef struct
+{
+    INT32       num_services;       /* -1, if error. Otherwise, the number of
+                                     * services collected from peer */
+    UINT16      *p_services_len;    /* this points the same location as the
+                                     * parameter in BTA_JvGetServicesLength() */
+} tBTA_JV_SERVICES_LEN;
+
+/* data associated with BTA_JV_SERVICE_SEL_EVT */
+typedef struct
+{
+    BD_ADDR     bd_addr;            /* The peer address */
+    UINT16      service_len;        /* the length of this record */
+} tBTA_JV_SERVICE_SEL;
+
+/* data associated with BTA_JV_CREATE_RECORD_EVT */
+typedef struct
+{
+   tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+} tBTA_JV_CREATE_RECORD;
+
+/* data associated with BTA_JV_UPDATE_RECORD_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The SDP record handle was updated */
+} tBTA_JV_UPDATE_RECORD;
+
+/* data associated with BTA_JV_ADD_ATTR_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The SDP record handle was updated */
+} tBTA_JV_ADD_ATTR;
+
+/* data associated with BTA_JV_DELETE_ATTR_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The SDP record handle was updated */
+} tBTA_JV_DELETE_ATTR;
+
+/* data associated with BTA_JV_L2CAP_OPEN_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    BD_ADDR         rem_bda;    /* The peer address */
+    INT32           tx_mtu;     /* The transmit MTU */
+} tBTA_JV_L2CAP_OPEN;
+
+/* data associated with BTA_JV_L2CAP_CLOSE_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    BOOLEAN         async;      /* FALSE, if local initiates disconnect */
+} tBTA_JV_L2CAP_CLOSE;
+
+/* data associated with BTA_JV_L2CAP_START_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT8           sec_id;     /* security ID used by this server */
+} tBTA_JV_L2CAP_START;
+
+/* data associated with BTA_JV_L2CAP_CL_INIT_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT8           sec_id;     /* security ID used by this client */
+} tBTA_JV_L2CAP_CL_INIT;
+
+/* data associated with BTA_JV_L2CAP_CONG_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    BOOLEAN         cong;       /* TRUE, congested. FALSE, uncongested */
+} tBTA_JV_L2CAP_CONG;
+
+/* data associated with BTA_JV_L2CAP_READ_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT32          req_id;     /* The req_id in the associated BTA_JvL2capRead() */
+    UINT8           *p_data;    /* This points the same location as the p_data
+                                 * parameter in BTA_JvL2capRead () */
+    UINT16          len;        /* The length of the data read. */
+} tBTA_JV_L2CAP_READ;
+
+/* data associated with BTA_JV_L2CAP_RECEIVE_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT32          req_id;     /* The req_id in the associated BTA_JvL2capReceive() */
+    UINT8           *p_data;    /* This points the same location as the p_data
+                                 * parameter in BTA_JvL2capReceive () */
+    UINT16          len;        /* The length of the data read. */
+} tBTA_JV_L2CAP_RECEIVE;
+
+/* data associated with BTA_JV_L2CAP_WRITE_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT32          req_id;     /* The req_id in the associated BTA_JvL2capWrite() */
+    UINT16          len;        /* The length of the data written. */
+    BOOLEAN         cong;       /* congestion status */
+} tBTA_JV_L2CAP_WRITE;
+
+/* data associated with BTA_JV_RFCOMM_OPEN_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    BD_ADDR         rem_bda;    /* The peer address */
+} tBTA_JV_RFCOMM_OPEN;
+/* data associated with BTA_JV_RFCOMM_SRV_OPEN_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;             /* Whether the operation succeeded or failed. */
+    UINT32          handle;             /* The connection handle */
+    UINT32          new_listen_handle;  /* The new listen handle */
+    BD_ADDR         rem_bda;            /* The peer address */
+} tBTA_JV_RFCOMM_SRV_OPEN;
+
+
+/* data associated with BTA_JV_RFCOMM_CLOSE_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;      /* Whether the operation succeeded or failed. */
+    UINT32          port_status; /* PORT status */
+    UINT32          handle;      /* The connection handle */
+    BOOLEAN         async;       /* FALSE, if local initiates disconnect */
+} tBTA_JV_RFCOMM_CLOSE;
+
+/* data associated with BTA_JV_RFCOMM_START_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT8           sec_id;     /* security ID used by this server */
+    BOOLEAN         use_co;     /* TRUE to use co_rfc_data */
+} tBTA_JV_RFCOMM_START;
+
+/* data associated with BTA_JV_RFCOMM_CL_INIT_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT8           sec_id;     /* security ID used by this client */
+    BOOLEAN         use_co;     /* TRUE to use co_rfc_data */
+} tBTA_JV_RFCOMM_CL_INIT;
+/*data associated with BTA_JV_L2CAP_DATA_IND_EVT & BTA_JV_RFCOMM_DATA_IND_EVT */
+typedef struct
+{
+    UINT32          handle;     /* The connection handle */
+} tBTA_JV_DATA_IND;
+
+/* data associated with BTA_JV_RFCOMM_CONG_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    BOOLEAN         cong;       /* TRUE, congested. FALSE, uncongested */
+} tBTA_JV_RFCOMM_CONG;
+
+/* data associated with BTA_JV_RFCOMM_READ_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT32          req_id;     /* The req_id in the associated BTA_JvRfcommRead() */
+    UINT8           *p_data;    /* This points the same location as the p_data
+                                 * parameter in BTA_JvRfcommRead () */
+    UINT16          len;        /* The length of the data read. */
+} tBTA_JV_RFCOMM_READ;
+
+/* data associated with BTA_JV_RFCOMM_WRITE_EVT */
+typedef struct
+{
+    tBTA_JV_STATUS  status;     /* Whether the operation succeeded or failed. */
+    UINT32          handle;     /* The connection handle */
+    UINT32          req_id;     /* The req_id in the associated BTA_JvRfcommWrite() */
+    int             len;        /* The length of the data written. */
+    BOOLEAN         cong;       /* congestion status */
+} tBTA_JV_RFCOMM_WRITE;
+
+
+/* union of data associated with JV callback */
+typedef union
+{
+    tBTA_JV_STATUS          status;         /* BTA_JV_ENABLE_EVT */
+    tBTA_JV_DISCOVERY_COMP  disc_comp;      /* BTA_JV_DISCOVERY_COMP_EVT */
+    tBTA_JV_SET_DISCOVER    set_discover;   /* BTA_JV_SET_DISCOVER_EVT */
+    tBTA_JV_SET_ENCRYPTION  set_encrypt;    /* BTA_JV_SET_ENCRYPTION_EVT */
+    BD_ADDR                 bd_addr;        /* BTA_JV_LOCAL_ADDR_EVT */
+    UINT8                   *p_name;        /* BTA_JV_LOCAL_NAME_EVT,
+                                               BTA_JV_REMOTE_NAME_EVT */
+    UINT8                   scn;            /* BTA_JV_GET_SCN_EVT */
+    UINT16                  psm;            /* BTA_JV_GET_PSM_EVT */
+    tBTA_JV_SERVICES_LEN    servs_len;      /* BTA_JV_SERVICES_LEN_EVT */
+    tBTA_JV_SERVICE_SEL     serv_sel;       /* BTA_JV_SERVICE_SEL_EVT */
+    tBTA_JV_CREATE_RECORD   create_rec;     /* BTA_JV_CREATE_RECORD_EVT */
+    tBTA_JV_UPDATE_RECORD   update_rec;     /* BTA_JV_UPDATE_RECORD_EVT */
+    tBTA_JV_ADD_ATTR        add_attr;       /* BTA_JV_ADD_ATTR_EVT */
+    tBTA_JV_DELETE_ATTR     del_attr;       /* BTA_JV_DELETE_ATTR_EVT */
+    tBTA_JV_L2CAP_OPEN      l2c_open;       /* BTA_JV_L2CAP_OPEN_EVT */
+    tBTA_JV_L2CAP_CLOSE     l2c_close;      /* BTA_JV_L2CAP_CLOSE_EVT */
+    tBTA_JV_L2CAP_START     l2c_start;      /* BTA_JV_L2CAP_START_EVT */
+    tBTA_JV_L2CAP_CL_INIT   l2c_cl_init;    /* BTA_JV_L2CAP_CL_INIT_EVT */
+    tBTA_JV_L2CAP_CONG      l2c_cong;       /* BTA_JV_L2CAP_CONG_EVT */
+    tBTA_JV_L2CAP_READ      l2c_read;       /* BTA_JV_L2CAP_READ_EVT */
+    tBTA_JV_L2CAP_WRITE     l2c_write;      /* BTA_JV_L2CAP_WRITE_EVT */
+    tBTA_JV_RFCOMM_OPEN     rfc_open;       /* BTA_JV_RFCOMM_OPEN_EVT */
+    tBTA_JV_RFCOMM_SRV_OPEN rfc_srv_open;   /* BTA_JV_RFCOMM_SRV_OPEN_EVT */
+    tBTA_JV_RFCOMM_CLOSE    rfc_close;      /* BTA_JV_RFCOMM_CLOSE_EVT */
+    tBTA_JV_RFCOMM_START    rfc_start;      /* BTA_JV_RFCOMM_START_EVT */
+    tBTA_JV_RFCOMM_CL_INIT  rfc_cl_init;    /* BTA_JV_RFCOMM_CL_INIT_EVT */
+    tBTA_JV_RFCOMM_CONG     rfc_cong;       /* BTA_JV_RFCOMM_CONG_EVT */
+    tBTA_JV_RFCOMM_READ     rfc_read;       /* BTA_JV_RFCOMM_READ_EVT */
+    tBTA_JV_RFCOMM_WRITE    rfc_write;      /* BTA_JV_RFCOMM_WRITE_EVT */
+    tBTA_JV_DATA_IND        data_ind;    /* BTA_JV_L2CAP_DATA_IND_EVT
+                                               BTA_JV_RFCOMM_DATA_IND_EVT */
+} tBTA_JV;
+
+/* JAVA DM Interface callback */
+typedef void (tBTA_JV_DM_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data, void * user_data);
+
+/* JAVA RFCOMM interface callback */
+typedef void* (tBTA_JV_RFCOMM_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data);
+
+/* JAVA L2CAP interface callback */
+typedef void (tBTA_JV_L2CAP_CBACK)(tBTA_JV_EVT event, tBTA_JV *p_data);
+
+/* JV configuration structure */
+typedef struct
+{
+    UINT16  sdp_raw_size;           /* The size of p_sdp_raw_data */
+    UINT16  sdp_db_size;            /* The size of p_sdp_db */
+    UINT8   *p_sdp_raw_data;        /* The data buffer to keep raw data */
+    tSDP_DISCOVERY_DB   *p_sdp_db;  /* The data buffer to keep SDP database */
+} tBTA_JV_CFG;
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         BTA_JvEnable
+**
+** Description      Enable the Java I/F service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_JV_ENABLE_EVT. This function must
+**                  be called before other functions in the JV API are
+**                  called.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvEnable(tBTA_JV_DM_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_JvDisable
+**
+** Description      Disable the Java I/F
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_JvDisable(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsEnable
+**
+** Description      Get the JV registration status.
+**
+** Returns          TRUE, if registered
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_JvIsEnable(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetDiscoverability
+**
+** Description      This function sets the Bluetooth  discoverable modes
+**                  of the local device.  This controls whether other
+**                  Bluetooth devices can find the local device.
+**
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_SET_DISCOVER_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvSetDiscoverability(tBTA_JV_DISC disc_mode);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetDiscoverability
+**
+** Description      This function gets the Bluetooth
+**                  discoverable modes of local device
+**
+** Returns          The current Bluetooth discoverable mode.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_DISC BTA_JvGetDiscoverability(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetLocalDeviceAddr
+**
+** Description      This function obtains the local Bluetooth device address.
+**                  The local Bluetooth device address is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_ADDR_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvGetLocalDeviceAddr(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetLocalDeviceName
+**
+** Description      This function obtains the name of the local device
+**                  The local Bluetooth device name is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_NAME_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvGetLocalDeviceName(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetRemoteDeviceName
+**
+** Description      This function obtains the name of the specified device.
+**                  The Bluetooth device name is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_REMOTE_NAME_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvGetRemoteDeviceName(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetPreknownDevice
+**
+** Description      This function obtains the Bluetooth address in the inquiry
+**                  database collected via the previous call to BTA_DmSearch().
+**
+** Returns          The number of preknown devices if p_bd_addr is NULL
+**                  BTA_JV_SUCCESS if successful.
+**                  BTA_JV_INTERNAL_ERR(-1) if internal failure.
+**
+*******************************************************************************/
+BTA_API extern INT32 BTA_JvGetPreknownDevice(UINT8 * p_bd_addr, UINT32 index);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetDeviceClass
+**
+** Description      This function obtains the local Class of Device.
+**
+** Returns          DEV_CLASS, A three-byte array of UINT8 that contains the
+**                  Class of Device information. The definitions are in the
+**                  "Bluetooth Assigned Numbers".
+**
+*******************************************************************************/
+BTA_API extern UINT8 * BTA_JvGetDeviceClass(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetServiceClass
+**
+** Description      This function sets the service class of local Class of Device
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvSetServiceClass(UINT32 service);
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetEncryption
+**
+** Description      This function ensures that the connection to the given device
+**                  is encrypted.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_SET_ENCRYPTION_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvSetEncryption(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsAuthenticated
+**
+** Description      This function checks if the peer device is authenticated
+**
+** Returns          TRUE if authenticated.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_JvIsAuthenticated(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsTrusted
+**
+** Description      This function checks if the peer device is trusted
+**                  (previously paired)
+**
+** Returns          TRUE if trusted.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_JvIsTrusted(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsAuthorized
+**
+** Description      This function checks if the peer device is authorized
+**
+** Returns          TRUE if authorized.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_JvIsAuthorized(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsEncrypted
+**
+** Description      This function checks if the link to peer device is encrypted
+**
+** Returns          TRUE if encrypted.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BTA_API extern BOOLEAN BTA_JvIsEncrypted(BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetSecurityMode
+**
+** Description      This function returns the current Bluetooth security mode
+**                  of the local device
+**
+** Returns          The current Bluetooth security mode.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_SEC_MODE BTA_JvGetSecurityMode(void);
+
+/* BTA_JvIsMaster is replaced by BTA_DmIsMaster */
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetSCN
+**
+** Description      This function reserves a SCN (server channel number) for
+**                  applications running over RFCOMM. It is primarily called by
+**                  server profiles/applications to register their SCN into the
+**                  SDP database. The SCN is reported by the tBTA_JV_DM_CBACK
+**                  callback with a BTA_JV_GET_SCN_EVT.
+**                  If the SCN reported is 0, that means all SCN resources are
+**                  exhausted.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvGetSCN(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvFreeSCN
+**
+** Description      This function frees a server channel number that was used
+**                  by an application running over RFCOMM.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvFreeSCN(UINT8 scn);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetPSM
+**
+** Description      This function reserves a PSM (Protocol Service Multiplexer)
+**                  applications running over L2CAP. It is primarily called by
+**                  server profiles/applications to register their PSM into the
+**                  SDP database.
+**
+** Returns          The next free PSM
+**
+*******************************************************************************/
+BTA_API extern UINT16 BTA_JvGetPSM(void);
+
+/*******************************************************************************
+**
+** Function         BTA_JvStartDiscovery
+**
+** Description      This function performs service discovery for the services
+**                  provided by the given peer device. When the operation is
+**                  complete the tBTA_JV_DM_CBACK callback function will be
+**                  called with a BTA_JV_DISCOVERY_COMP_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvStartDiscovery(BD_ADDR bd_addr, UINT16 num_uuid,
+                           tSDP_UUID *p_uuid_list, void* user_data);
+
+/*******************************************************************************
+**
+** Function         BTA_JvCancelDiscovery
+**
+** Description      This function cancels an active service discovery.
+**                  When the operation is
+**                  complete the tBTA_JV_DM_CBACK callback function will be
+**                  called with a BTA_JV_CANCEL_DISCVRY_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvCancelDiscovery(void * user_data);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetServicesLength
+**
+** Description      This function obtains the number of services and the length
+**                  of each service found in the SDP database (result of last
+**                  BTA_JvStartDiscovery().When the operation is complete the
+**                  tBTA_JV_DM_CBACK callback function will be called with a
+**                  BTA_JV_SERVICES_LEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvGetServicesLength(BOOLEAN inc_hdr, UINT16 *p_services_len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetServicesResult
+**
+** Description      This function returns a number of service records found
+**                  during current service search, equals to the number returned
+**                  by previous call to BTA_JvGetServicesLength.
+**                  The contents of each SDP record will be returned under a
+**                  TLV (type, len, value) representation in the data buffer
+**                  provided by the caller.
+**
+** Returns          -1, if error. Otherwise, the number of services
+**
+*******************************************************************************/
+BTA_API extern INT32 BTA_JvGetServicesResult(BOOLEAN inc_hdr, UINT8 **TLVs);
+
+/*******************************************************************************
+**
+** Function         BTA_JvServiceSelect
+**
+** Description      This function checks if the SDP database contains the given
+**                  service UUID. When the operation is complete the
+**                  tBTA_JV_DM_CBACK callback function will be called with a
+**                  BTA_JV_SERVICE_SEL_EVT with the length of the service record.
+**                  If the service is not found or error, -1 is reported.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvServiceSelect(UINT16 uuid);
+
+/*******************************************************************************
+**
+** Function         BTA_JvServiceResult
+**
+** Description      This function returns the contents of the SDP record from
+**                  last BTA_JvServiceSelect. The contents will be returned under
+**                  a TLV (type, len, value) representation in the data buffer
+**                  provided by the caller.
+**
+** Returns          -1, if error. Otherwise, the length of service record.
+**
+*******************************************************************************/
+BTA_API extern INT32 BTA_JvServiceResult(UINT8 *TLV);
+
+/*******************************************************************************
+**
+** Function         BTA_JvCreateRecord
+**
+** Description      Create a service record in the local SDP database by user in
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_CREATE_RECORD_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvCreateRecordByUser(void* user_data);
+
+/*******************************************************************************
+**
+** Function         BTA_JvUpdateRecord
+**
+** Description      Update a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_UPDATE_RECORD_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvUpdateRecord(UINT32 handle, UINT16 *p_ids,
+                           UINT8 **p_values, INT32 *p_value_sizes, INT32 array_len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvAddAttribute
+**
+** Description      Add an attribute to a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_ADD_ATTR_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvAddAttribute(UINT32 handle, UINT16 attr_id,
+                           UINT8 *p_value, INT32 value_size);
+
+/*******************************************************************************
+**
+** Function         BTA_JvDeleteAttribute
+**
+** Description      Delete an attribute from a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_DELETE_ATTR_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvDeleteAttribute(UINT32 handle, UINT16 attr_id);
+
+/*******************************************************************************
+**
+** Function         BTA_JvDeleteRecord
+**
+** Description      Delete a service record in the local SDP database.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvDeleteRecord(UINT32 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_JvReadRecord
+**
+** Description      Read a service record in the local SDP database.
+**
+** Returns          -1, if the record is not found.
+**                  Otherwise, the offset (0 or 1) to start of data in p_data.
+**
+**                  The size of data copied into p_data is in *p_data_len.
+**
+*******************************************************************************/
+BTA_API extern INT32 BTA_JvReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capConnect
+**
+** Description      Initiate a connection as a L2CAP client to the given BD
+**                  Address.
+**                  When the connection is initiated or failed to initiate,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_CL_INIT_EVT
+**                  When the connection is established or failed,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capConnect(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role,  UINT16 remote_psm, UINT16 rx_mtu,
+                           BD_ADDR peer_bd_addr, tBTA_JV_L2CAP_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capClose
+**
+** Description      This function closes an L2CAP client connection
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capClose(UINT32 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capStartServer
+**
+** Description      This function starts an L2CAP server and listens for an L2CAP
+**                  connection from a remote Bluetooth device.  When the server
+**                  is started successfully, tBTA_JV_L2CAP_CBACK is called with
+**                  BTA_JV_L2CAP_START_EVT.  When the connection is established,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capStartServer(tBTA_SEC sec_mask, tBTA_JV_ROLE role,
+                           UINT16 local_psm, UINT16 rx_mtu,
+                           tBTA_JV_L2CAP_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capStopServer
+**
+** Description      This function stops the L2CAP server. If the server has an
+**                  active connection, it would be closed.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capStopServer(UINT16 local_psm);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capRead
+**
+** Description      This function reads data from an L2CAP connection
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_READ_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capRead(UINT32 handle, UINT32 req_id,
+                                              UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capReceive
+**
+** Description      This function reads data from an L2CAP connection
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_RECEIVE_EVT.
+**                  If there are more data queued in L2CAP than len, the extra data will be discarded.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capReceive(UINT32 handle, UINT32 req_id,
+                                              UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capReady
+**
+** Description      This function determined if there is data to read from
+**                  an L2CAP connection
+**
+** Returns          BTA_JV_SUCCESS, if data queue size is in *p_data_size.
+**                  BTA_JV_FAILURE, if error.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capReady(UINT32 handle, UINT32 *p_data_size);
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capWrite
+**
+** Description      This function writes data to an L2CAP connection
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_WRITE_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvL2capWrite(UINT32 handle, UINT32 req_id,
+                                               UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommConnect
+**
+** Description      This function makes an RFCOMM conection to a remote BD
+**                  Address.
+**                  When the connection is initiated or failed to initiate,
+**                  tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_CL_INIT_EVT
+**                  When the connection is established or failed,
+**                  tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_OPEN_EVT
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommConnect(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role, UINT8 remote_scn, BD_ADDR peer_bd_addr,
+                           tBTA_JV_RFCOMM_CBACK *p_cback, void *user_data);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommClose
+**
+** Description      This function closes an RFCOMM connection
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommClose(UINT32 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommStartServer
+**
+** Description      This function starts listening for an RFCOMM connection
+**                  request from a remote Bluetooth device.  When the server is
+**                  started successfully, tBTA_JV_RFCOMM_CBACK is called
+**                  with BTA_JV_RFCOMM_START_EVT.
+**                  When the connection is established, tBTA_JV_RFCOMM_CBACK
+**                  is called with BTA_JV_RFCOMM_OPEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommStartServer(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role, UINT8 local_scn, UINT8 max_session,
+                           tBTA_JV_RFCOMM_CBACK *p_cback, void *user_data);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommStopServer
+**
+** Description      This function stops the RFCOMM server. If the server has an
+**                  active connection, it would be closed.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommStopServer(UINT32 handle);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommRead
+**
+** Description      This function reads data from an RFCOMM connection
+**                  When the operation is complete, tBTA_JV_RFCOMM_CBACK is
+**                  called with BTA_JV_RFCOMM_READ_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommRead(UINT32 handle, UINT32 req_id,
+                                               UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommReady
+**
+** Description      This function determined if there is data to read from
+**                  an RFCOMM connection
+**
+** Returns          BTA_JV_SUCCESS, if data queue size is in *p_data_size.
+**                  BTA_JV_FAILURE, if error.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommReady(UINT32 handle, UINT32 *p_data_size);
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommWrite
+**
+** Description      This function writes data to an RFCOMM connection
+**                  When the operation is complete, tBTA_JV_RFCOMM_CBACK is
+**                  called with BTA_JV_RFCOMM_WRITE_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+BTA_API extern tBTA_JV_STATUS BTA_JvRfcommWrite(UINT32 handle, UINT32 req_id);
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommGetPortHdl
+**
+** Description    This function fetches the rfcomm port handle
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+UINT16 BTA_JvRfcommGetPortHdl(UINT32 handle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_JV_API_H */
+
diff --git a/bta/include/bta_jv_co.h b/bta/include/bta_jv_co.h
new file mode 100644
index 0000000..098766c
--- /dev/null
+++ b/bta/include/bta_jv_co.h
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2007-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for java interface call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_JV_CO_H
+#define BTA_JV_CO_H
+
+#include "bta_jv_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         bta_jv_co_rfc_data
+**
+** Description      This function is called by JV to send data to the java glue
+**                  code when the RX data path is configured to use a call-out
+**
+** Returns          void
+**
+*******************************************************************************/
+
+BTA_API extern int bta_co_rfc_data_incoming(void *user_data, BT_HDR *p_buf);
+BTA_API extern int bta_co_rfc_data_outgoing_size(void *user_data, int *size);
+BTA_API extern int bta_co_rfc_data_outgoing(void *user_data, UINT8* buf, UINT16 size);
+
+#endif /* BTA_DG_CO_H */
+
diff --git a/bta/include/bta_op_api.h b/bta/include/bta_op_api.h
new file mode 100644
index 0000000..c26ea35
--- /dev/null
+++ b/bta/include/bta_op_api.h
@@ -0,0 +1,67 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the object push (OP) client and
+ *  server subsystem of BTA, Broadcom's Bluetooth application layer for
+ *  mobile phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_OP_API_H
+#define BTA_OP_API_H
+
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+/* Extra Debug Code */
+#ifndef BTA_OPS_DEBUG
+#define BTA_OPS_DEBUG           FALSE
+#endif
+
+#ifndef BTA_OPC_DEBUG
+#define BTA_OPC_DEBUG           FALSE
+#endif
+
+
+/* Object format */
+#define BTA_OP_VCARD21_FMT          1       /* vCard 2.1 */
+#define BTA_OP_VCARD30_FMT          2       /* vCard 3.0 */
+#define BTA_OP_VCAL_FMT             3       /* vCal 1.0 */
+#define BTA_OP_ICAL_FMT             4       /* iCal 2.0 */
+#define BTA_OP_VNOTE_FMT            5       /* vNote */
+#define BTA_OP_VMSG_FMT             6       /* vMessage */
+#define BTA_OP_OTHER_FMT            0xFF    /* other format */
+
+typedef UINT8 tBTA_OP_FMT;
+
+/* Object format mask */
+#define BTA_OP_VCARD21_MASK         0x01    /* vCard 2.1 */
+#define BTA_OP_VCARD30_MASK         0x02    /* vCard 3.0 */
+#define BTA_OP_VCAL_MASK            0x04    /* vCal 1.0 */
+#define BTA_OP_ICAL_MASK            0x08    /* iCal 2.0 */
+#define BTA_OP_VNOTE_MASK           0x10    /* vNote */
+#define BTA_OP_VMSG_MASK            0x20    /* vMessage */
+#define BTA_OP_ANY_MASK             0x40    /* Any type of object. */
+
+typedef UINT8 tBTA_OP_FMT_MASK;
+
+#endif /* BTA_OP_API_H */
+
diff --git a/bta/include/bta_pan_api.h b/bta/include/bta_pan_api.h
new file mode 100644
index 0000000..2166766
--- /dev/null
+++ b/bta/include/bta_pan_api.h
@@ -0,0 +1,201 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the Personal Area Networking (PAN)
+ *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_PAN_API_H
+#define BTA_PAN_API_H
+
+#include "bta_api.h"
+#include "pan_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+#define BTA_PAN_SUCCESS          0
+#define BTA_PAN_FAIL             1
+
+typedef UINT8 tBTA_PAN_STATUS;
+
+
+/* PAN Callback events */
+#define BTA_PAN_ENABLE_EVT       0       /* PAN service is enabled. */
+#define BTA_PAN_SET_ROLE_EVT     1       /* PAN roles registered */
+#define BTA_PAN_OPENING_EVT      2       /* Connection is being opened. */
+#define BTA_PAN_OPEN_EVT         3       /* Connection has been opened. */
+#define BTA_PAN_CLOSE_EVT        4       /* Connection has been closed. */
+
+typedef UINT8 tBTA_PAN_EVT;
+
+
+/* pan roles */
+#define BTA_PAN_ROLE_PANU        PAN_ROLE_CLIENT
+#define BTA_PAN_ROLE_GN          PAN_ROLE_GN_SERVER
+#define BTA_PAN_ROLE_NAP         PAN_ROLE_NAP_SERVER
+
+
+typedef UINT8   tBTA_PAN_ROLE;
+
+/*  information regarding PAN roles */
+typedef struct
+{
+    char *p_srv_name;  /* service name for the PAN role */
+    UINT8 app_id;      /* application id */
+    tBTA_SEC sec_mask; /* security setting for the role */
+
+} tBTA_PAN_ROLE_INFO;
+
+
+/* Event associated with BTA_PAN_SET_ROLE_EVT */
+typedef struct
+{
+    tBTA_PAN_STATUS status;     /* status of set role event */
+    tBTA_PAN_ROLE   role;       /* PAN roles successfully registered */
+} tBTA_PAN_SET_ROLE;
+
+/* Event associated with BTA_PAN_OPENING_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;    /* BD address of peer device. */
+    UINT16          handle;     /* Handle associated with this connection. */
+
+} tBTA_PAN_OPENING;
+
+
+/* Event associated with BTA_PAN_OPEN_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;    /* BD address of peer device. */
+    UINT16          handle;     /* Handle associated with this connection. */
+    tBTA_PAN_STATUS status;     /* status of open event */
+    tBTA_PAN_ROLE   local_role; /* Local device PAN role for the connection */
+    tBTA_PAN_ROLE   peer_role;  /* Peer device PAN role for the connection */
+
+} tBTA_PAN_OPEN;
+
+/* Event associated with BTA_PAN_CLOSE_EVT */
+typedef struct
+{
+    UINT16          handle;     /* Handle associated with the connection. */
+} tBTA_PAN_CLOSE;
+
+/* Union of all PAN callback structures */
+typedef union
+{
+    tBTA_PAN_SET_ROLE   set_role;   /* set_role event */
+    tBTA_PAN_OPEN       open;       /* Connection has been opened. */
+    tBTA_PAN_OPENING    opening;    /* Connection being opened */
+    tBTA_PAN_CLOSE      close;      /* Connection has been closed. */
+} tBTA_PAN;
+
+/* Number of PAN connections */
+#ifndef BTA_PAN_NUM_CONN
+#define BTA_PAN_NUM_CONN         4
+#endif
+
+/* PAN callback */
+typedef void (tBTA_PAN_CBACK)(tBTA_PAN_EVT event, tBTA_PAN *p_data);
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         BTA_PanEnable
+**
+** Description      Enable PAN service.  This function must be
+**                  called before any other functions in the PAN API are called.
+**                  When the enable operation is complete the callback function
+**                  will be called with a BTA_PAN_ENABLE_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_PanEnable(tBTA_PAN_CBACK p_cback);
+
+/*******************************************************************************
+**
+** Function         BTA_PanDisable
+**
+** Description      Disable PAN service.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_PanDisable(void);
+
+
+/*******************************************************************************
+**
+** Function         BTA_PanSetRole
+**
+** Description      Sets PAN roles. When the enable operation is complete
+**                  the callback function will be called with a BTA_PAN_SET_ROLE_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_PanSetRole(tBTA_PAN_ROLE role, tBTA_PAN_ROLE_INFO *p_user_info, tBTA_PAN_ROLE_INFO *p_gn_info,
+                                        tBTA_PAN_ROLE_INFO *p_nap_info);
+
+
+/*******************************************************************************
+**
+** Function         BTA_PanOpen
+**
+** Description      Opens a connection to a peer device.
+**                  When connection is open callback function is called
+**                  with a BTA_PAN_OPEN_EVT.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_PanOpen(BD_ADDR bd_addr, tBTA_PAN_ROLE    local_role, tBTA_PAN_ROLE  peer_role);
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_PanClose
+**
+** Description      Close a PAN  connection to a peer device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void BTA_PanClose(UINT16 handle);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_PAN_API_H */
+
diff --git a/bta/include/bta_pan_ci.h b/bta/include/bta_pan_ci.h
new file mode 100644
index 0000000..faeef54
--- /dev/null
+++ b/bta/include/bta_pan_ci.h
@@ -0,0 +1,151 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for pan call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_PAN_CI_H
+#define BTA_PAN_CI_H
+
+#include "bta_pan_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_tx_ready
+**
+** Description      This function sends an event to PAN indicating the phone is
+**                  ready for more data and PAN should call bta_pan_co_tx_path().
+**                  This function is used when the TX data path is configured
+**                  to use a pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_tx_ready(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_rx_ready
+**
+** Description      This function sends an event to PAN indicating the phone
+**                  has data available to send to PAN and PAN should call
+**                  bta_pan_co_rx_path().  This function is used when the RX
+**                  data path is configured to use a pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_rx_ready(UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_tx_flow
+**
+** Description      This function is called to enable or disable data flow on
+**                  the TX path.  The phone should call this function to
+**                  disable data flow when it is congested and cannot handle
+**                  any more data sent by bta_pan_co_tx_write() or
+**                  bta_pan_co_tx_writebuf().  This function is used when the
+**                  TX data path is configured to use a push interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_tx_flow(UINT16 handle, BOOLEAN enable);
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_rx_writebuf
+**
+** Description      This function is called to send data to the phone when
+**                  the RX path is configured to use a push interface with
+**                  zero copy.  The function sends an event to PAN containing
+**                  the data buffer.  The buffer must be allocated using
+**                  functions GKI_getbuf() or GKI_getpoolbuf().  The buffer
+**                  will be freed by BTA; the phone must not free the buffer.
+**
+**
+** Returns          TRUE if flow enabled
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_rx_writebuf(UINT16 handle, BD_ADDR src, BD_ADDR dst, UINT16 protocol, BT_HDR *p_buf, BOOLEAN ext);
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_readbuf
+**
+** Description      This function is called by the phone to read data from PAN
+**                  when the TX path is configured to use a pull interface.
+**                  The phone must free the buffer using function GKI_freebuf() when
+**                  it is through processing the buffer.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern BT_HDR * bta_pan_ci_readbuf(UINT16 handle, BD_ADDR src, BD_ADDR dst, UINT16 *p_protocol,
+                                 BOOLEAN* p_ext, BOOLEAN* p_forward);
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_set_pfilters
+**
+** Description      This function is called to set protocol filters
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_set_pfilters(UINT16 handle, UINT16 num_filters, UINT16 *p_start_array, UINT16 *p_end_array);
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_set_mfilters
+**
+** Description      This function is called to set multicast filters
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_ci_set_mfilters(UINT16 handle, UINT16 num_mcast_filters, UINT8 *p_start_array,
+                                                    UINT8 *p_end_array);
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_PAN_CI_H */
+
diff --git a/bta/include/bta_pan_co.h b/bta/include/bta_pan_co.h
new file mode 100644
index 0000000..5b20fad
--- /dev/null
+++ b/bta/include/bta_pan_co.h
@@ -0,0 +1,201 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for data gateway call-out functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_PAN_CO_H
+#define BTA_PAN_CO_H
+
+#include "bta_pan_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+
+
+/* BT_HDR buffer offset */
+#define BTA_PAN_MIN_OFFSET       PAN_MINIMUM_OFFSET
+
+
+/* Data Flow Mask */
+#define BTA_PAN_RX_PUSH          0x00        /* RX push. */
+#define BTA_PAN_RX_PUSH_BUF      0x01        /* RX push with zero copy. */
+#define BTA_PAN_RX_PULL          0x02        /* RX pull. */
+#define BTA_PAN_TX_PUSH          0x00        /* TX push. */
+#define BTA_PAN_TX_PUSH_BUF      0x10        /* TX push with zero copy. */
+#define BTA_PAN_TX_PULL          0x20        /* TX pull. */
+
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_init
+**
+** Description      This callout function is executed by PAN when a server is
+**                  started by calling BTA_PanEnable().  This function can be
+**                  used by the phone to initialize data paths or for other
+**                  initialization purposes.  The function must return the
+**                  data flow mask as described below.
+**
+**
+** Returns          Data flow mask.
+**
+*******************************************************************************/
+BTA_API extern UINT8 bta_pan_co_init(UINT8 *q_level);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_open
+**
+** Description      This function is executed by PAN when a connection
+**                  is opened.  The phone can use this function to set
+**                  up data paths or perform any required initialization.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_open(UINT16 handle, UINT8 app_id, tBTA_PAN_ROLE local_role, tBTA_PAN_ROLE peer_role, BD_ADDR peer_addr);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_close
+**
+** Description      This function is called by PAN when a connection to a
+**                  server is closed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_close(UINT16 handle, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_path
+**
+** Description      This function is called by PAN to transfer data on the
+**                  TX path; that is, data being sent from BTA to the phone.
+**                  This function is used when the TX data path is configured
+**                  to use the pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_tx_path(UINT16 handle, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_rx_path
+**
+** Description      This function is called by PAN to transfer data on the
+**                  RX path; that is, data being sent from the phone to BTA.
+**                  This function is used when the RX data path is configured
+**                  to use the pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_rx_path(UINT16 handle, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_write
+**
+** Description      This function is called by PAN to send data to the phone
+**                  when the TX path is configured to use a push interface.
+**                  The implementation of this function must copy the data to
+**                  the phone's memory.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_tx_write(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, UINT8 *p_data,
+                                UINT16 len, BOOLEAN ext, BOOLEAN forward);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_writebuf
+**
+** Description      This function is called by PAN to send data to the phone
+**                  when the TX path is configured to use a push interface with
+**                  zero copy.  The phone must free the buffer using function
+**                  GKI_freebuf() when it is through processing the buffer.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_tx_writebuf(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, BT_HDR *p_buf,
+                                   BOOLEAN ext, BOOLEAN forward);
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_rx_flow
+**
+** Description      This function is called by PAN to enable or disable
+**                  data flow on the RX path when it is configured to use
+**                  a push interface.  If data flow is disabled the phone must
+**                  not call bta_pan_ci_rx_write() or bta_pan_ci_rx_writebuf()
+**                  until data flow is enabled again.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_rx_flow(UINT16 handle, UINT8 app_id, BOOLEAN enable);
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_filt_ind
+**
+** Description      protocol filter indication from peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_pfilt_ind(UINT16 handle, BOOLEAN indication, tBTA_PAN_STATUS result,
+                                    UINT16 len, UINT8 *p_filters);
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_mfilt_ind
+**
+** Description      multicast filter indication from peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API extern void bta_pan_co_mfilt_ind(UINT16 handle,  BOOLEAN indication, tBTA_PAN_STATUS result,
+                                    UINT16 len, UINT8 *p_filters);
+
+#endif /* BTA_PAN_CO_H */
+
diff --git a/bta/include/bta_pbs_api.h b/bta/include/bta_pbs_api.h
new file mode 100644
index 0000000..c3563c2
--- /dev/null
+++ b/bta/include/bta_pbs_api.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the phone book access (PB) server
+ *  subsystem of BTA, Broadcom's Bluetooth application layer for mobile
+ *  phones.
+ *
+ ******************************************************************************/
+#ifndef BTA_PB_API_H
+#define BTA_PB_API_H
+
+#include "bta_api.h"
+#include "btm_api.h"
+#include "bta_sys.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/**************************
+**  Common Definitions
+***************************/
+
+/* Profile supported features */
+#define BTA_PBS_SUPF_DOWNLOAD     0x0001
+#define BTA_PBS_SURF_BROWSE       0x0002
+
+/* Profile supported repositories */
+#define BTA_PBS_REPOSIT_LOCAL      0x01    /* Local PhoneBook */
+#define BTA_PBS_REPOSIT_SIM        0x02    /* SIM card PhoneBook */
+
+#endif
diff --git a/bta/include/bta_sys_ci.h b/bta/include/bta_sys_ci.h
new file mode 100644
index 0000000..4818386
--- /dev/null
+++ b/bta/include/bta_sys_ci.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for system call-in functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_SYS_CI_H
+#define BTA_SYS_CI_H
+
+#include "bta_api.h"
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_ci_enabled
+**
+** Description      This function must be called in response to function
+**                  bta_sys_hw_co_enable(), when HW is indeed enabled
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API  void bta_sys_hw_ci_enabled(tBTA_SYS_HW_MODULE module );
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_ci_disabled
+**
+** Description      This function must be called in response to function
+**                  bta_sys_hw_co_disable() when HW is really OFF
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_hw_ci_disabled( tBTA_SYS_HW_MODULE module  );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/bta/include/bta_sys_co.h b/bta/include/bta_sys_co.h
new file mode 100644
index 0000000..92118a3
--- /dev/null
+++ b/bta/include/bta_sys_co.h
@@ -0,0 +1,59 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for system callout functions.
+ *
+ ******************************************************************************/
+#ifndef BTA_SYS_CO_H
+#define BTA_SYS_CO_H
+
+#include "bta_sys.h"
+
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_co_enable
+**
+** Description      This function is called by the stack to power up the HW
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_hw_co_enable( tBTA_SYS_HW_MODULE module );
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_co_disable
+**
+** Description     This function is called by the stack to power down the HW
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_hw_co_disable( tBTA_SYS_HW_MODULE module );
+
+
+#endif
diff --git a/bta/include/ptim.h b/bta/include/ptim.h
new file mode 100644
index 0000000..80e50bd
--- /dev/null
+++ b/bta/include/ptim.h
@@ -0,0 +1,99 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Protocol timer services.
+ *
+ ******************************************************************************/
+#ifndef PTIM_H
+#define PTIM_H
+
+#include "gki.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+typedef struct
+{
+    TIMER_LIST_Q        timer_queue;        /* GKI timer queue */
+    INT32               period;             /* Timer period in milliseconds */
+    UINT32              last_gki_ticks;     /* GKI ticks since last time update called */
+    UINT8               timer_id;           /* GKI timer id */
+} tPTIM_CB;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         ptim_init
+**
+** Description      Initialize a protocol timer service control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void ptim_init(tPTIM_CB *p_cb, UINT16 period, UINT8 timer_id);
+
+/*******************************************************************************
+**
+** Function         ptim_timer_update
+**
+** Description      Update the protocol timer list and handle expired timers.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void ptim_timer_update(tPTIM_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         ptim_start_timer
+**
+** Description      Start a protocol timer for the specified amount
+**                  of time in milliseconds.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void ptim_start_timer(tPTIM_CB *p_cb, TIMER_LIST_ENT *p_tle, UINT16 type, INT32 timeout);
+
+/*******************************************************************************
+**
+** Function         ptim_stop_timer
+**
+** Description      Stop a protocol timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+extern void ptim_stop_timer(tPTIM_CB *p_cb, TIMER_LIST_ENT *p_tle);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PTIM_H */
diff --git a/bta/include/utl.h b/bta/include/utl.h
new file mode 100644
index 0000000..df08b5a
--- /dev/null
+++ b/bta/include/utl.h
@@ -0,0 +1,169 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Basic utility functions.
+ *
+ ******************************************************************************/
+#ifndef UTL_H
+#define UTL_H
+
+#include "data_types.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+/*** class of device settings ***/
+#define BTA_UTL_SET_COD_MAJOR_MINOR     0x01
+#define BTA_UTL_SET_COD_SERVICE_CLASS   0x02 /* only set the bits in the input */
+#define BTA_UTL_CLR_COD_SERVICE_CLASS   0x04
+#define BTA_UTL_SET_COD_ALL             0x08 /* take service class as the input (may clear some set bits!!) */
+#define BTA_UTL_INIT_COD                0x0a
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/** for utl_set_device_class() **/
+typedef struct
+{
+    UINT8       minor;
+    UINT8       major;
+    UINT16      service;
+} tBTA_UTL_COD;
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         utl_str2int
+**
+** Description      This utility function converts a character string to an
+**                  integer.  Acceptable values in string are 0-9.  If invalid
+**                  string or string value too large, -1 is returned.
+**
+**
+** Returns          Integer value or -1 on error.
+**
+*******************************************************************************/
+extern INT16 utl_str2int(const char *p_s);
+
+/*******************************************************************************
+**
+** Function         utl_strucmp
+**
+** Description      This utility function compares two strings in uppercase.
+**                  String p_s must be uppercase.  String p_t is converted to
+**                  uppercase if lowercase.  If p_s ends first, the substring
+**                  match is counted as a match.
+**
+**
+** Returns          0 if strings match, nonzero otherwise.
+**
+*******************************************************************************/
+extern int utl_strucmp(const char *p_s, const char *p_t);
+
+/*******************************************************************************
+**
+** Function         utl_itoa
+**
+** Description      This utility function converts a UINT16 to a string.  The
+**                  string is NULL-terminated.  The length of the string is
+**                  returned.
+**
+**
+** Returns          Length of string.
+**
+*******************************************************************************/
+extern UINT8 utl_itoa(UINT16 i, char *p_s);
+
+/*******************************************************************************
+**
+** Function         utl_freebuf
+**
+** Description      This function calls GKI_freebuf to free the buffer passed
+**                  in, if buffer pointer is not NULL, and also initializes
+**                  buffer pointer to NULL.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+extern void utl_freebuf(void **p);
+
+/*******************************************************************************
+**
+** Function         utl_set_device_class
+**
+** Description      This function updates the local Device Class.
+**
+** Parameters:
+**                  p_cod   - Pointer to the device class to set to
+**
+**                  cmd     - the fields of the device class to update.
+**                            BTA_UTL_SET_COD_MAJOR_MINOR, - overwrite major, minor class
+**                            BTA_UTL_SET_COD_SERVICE_CLASS - set the bits in the input
+**                            BTA_UTL_CLR_COD_SERVICE_CLASS - clear the bits in the input
+**                            BTA_UTL_SET_COD_ALL - overwrite major, minor, set the bits in service class
+**                            BTA_UTL_INIT_COD - overwrite major, minor, and service class
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+extern BOOLEAN utl_set_device_class(tBTA_UTL_COD *p_cod, UINT8 cmd);
+
+/*******************************************************************************
+**
+** Function         utl_isintstr
+**
+** Description      This utility function checks if the given string is an
+**                  integer string or not
+**
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+extern BOOLEAN utl_isintstr(const char *p_s);
+
+/*******************************************************************************
+**
+** Function         utl_isdialstr
+**
+** Description      This utility function checks if the given string contains
+**                  only dial digits or not
+**
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+extern BOOLEAN utl_isdialstr(const char *p_s);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* UTL_H */
diff --git a/bta/jv/bta_jv_act.c b/bta/jv/bta_jv_act.c
new file mode 100644
index 0000000..77d18d9
--- /dev/null
+++ b/bta/jv/bta_jv_act.c
@@ -0,0 +1,2360 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains action functions for advanced audio.
+ *
+ ******************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <arpa/inet.h>
+
+#include "bt_types.h"
+#include "gki.h"
+#include "bd.h"
+#include "utl.h"
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_jv_api.h"
+#include "bta_jv_int.h"
+#include "bta_jv_co.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "sdp_api.h"
+#include "l2c_api.h"
+#include "port_api.h"
+#include <string.h>
+#include "rfcdefs.h"
+#include "avct_api.h"
+#include "avdt_api.h"
+
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+
+#define HDL2CB(handle) \
+    UINT32  __hi = ((handle) & BTA_JV_RFC_HDL_MASK) - 1; \
+    UINT32  __si = BTA_JV_RFC_HDL_TO_SIDX(handle); \
+    tBTA_JV_RFC_CB  *p_cb = &bta_jv_cb.rfc_cb[__hi]; \
+    tBTA_JV_PCB   *p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[__si] - 1]
+
+extern void uuid_to_string(bt_uuid_t *p_uuid, char *str);
+static inline void logu(const char* title, const uint8_t * p_uuid)
+{
+    char uuids[128];
+    uuid_to_string((bt_uuid_t*)p_uuid, uuids);
+    ALOGD("%s: %s", title, uuids);
+}
+
+
+static tBTA_JV_PCB * bta_jv_add_rfc_port(tBTA_JV_RFC_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_local_device_addr_cback
+**
+** Description  Callback from btm after local bdaddr is read
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_get_local_device_addr_cback(BD_ADDR bd_addr)
+{
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_LOCAL_ADDR_EVT, (tBTA_JV *)bd_addr, 0);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_remote_device_name_cback
+**
+** Description  Callback from btm after remote name is read
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_get_remote_device_name_cback(tBTM_REMOTE_DEV_NAME *p_name)
+{
+    tBTA_JV evt_data;
+    evt_data.p_name = p_name->remote_bd_name;
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_REMOTE_NAME_EVT, &evt_data, 0);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_alloc_sec_id
+**
+** Description  allocate a security id
+**
+** Returns
+**
+*******************************************************************************/
+UINT8 bta_jv_alloc_sec_id(void)
+{
+    UINT8 ret = 0;
+    int i;
+    for(i=0; i<BTA_JV_NUM_SERVICE_ID; i++)
+    {
+        if(0 == bta_jv_cb.sec_id[i])
+        {
+            bta_jv_cb.sec_id[i] = BTA_JV_FIRST_SERVICE_ID + i;
+            ret = bta_jv_cb.sec_id[i];
+            break;
+        }
+    }
+    return ret;
+
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_sec_id
+**
+** Description  free the given security id
+**
+** Returns
+**
+*******************************************************************************/
+static void bta_jv_free_sec_id(UINT8 *p_sec_id)
+{
+    UINT8 sec_id = *p_sec_id;
+    *p_sec_id = 0;
+    if(sec_id >= BTA_JV_FIRST_SERVICE_ID && sec_id <= BTA_JV_LAST_SERVICE_ID)
+    {
+        BTM_SecClrService(sec_id);
+        bta_jv_cb.sec_id[sec_id - BTA_JV_FIRST_SERVICE_ID] = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_alloc_rfc_cb
+**
+** Description  allocate a control block for the given port handle
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_RFC_CB * bta_jv_alloc_rfc_cb(UINT16 port_handle, tBTA_JV_PCB **pp_pcb)
+{
+    tBTA_JV_RFC_CB *p_cb = NULL;
+    tBTA_JV_PCB *p_pcb;
+    int i;
+    for(i=0; i<BTA_JV_MAX_RFC_CONN; i++)
+    {
+        if(0 == bta_jv_cb.rfc_cb[i].handle )
+        {
+            p_cb = &bta_jv_cb.rfc_cb[i];
+            p_cb->handle            = i + 1;
+            p_cb->max_sess          = 1;
+            p_cb->rfc_hdl[0]        = port_handle;
+            APPL_TRACE_DEBUG2( "bta_jv_alloc_rfc_cb port_handle:%d handle:%d",
+                port_handle, p_cb->handle);
+            p_pcb = &bta_jv_cb.port_cb[port_handle - 1];
+            p_pcb->handle = p_cb->handle;
+            p_pcb->port_handle = port_handle;
+            *pp_pcb = p_pcb;
+            break;
+        }
+    }
+    return p_cb;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfc_port_to_pcb
+**
+** Description  find the port control block associated with the given port handle
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_PCB * bta_jv_rfc_port_to_pcb(UINT16 port_handle)
+{
+    tBTA_JV_PCB *p_pcb = NULL;
+
+    if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && bta_jv_cb.port_cb[port_handle - 1].handle)
+    {
+        p_pcb = &bta_jv_cb.port_cb[port_handle - 1];
+    }
+
+    return p_pcb;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfc_port_to_cb
+**
+** Description  find the RFCOMM control block associated with the given port handle
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_RFC_CB * bta_jv_rfc_port_to_cb(UINT16 port_handle)
+{
+    tBTA_JV_RFC_CB *p_cb = NULL;
+    UINT32 handle;
+
+    if ((port_handle > 0) && (port_handle <= MAX_RFC_PORTS) && bta_jv_cb.port_cb[port_handle - 1].handle)
+    {
+        handle = bta_jv_cb.port_cb[port_handle - 1].handle;
+        handle &= BTA_JV_RFC_HDL_MASK;
+        if (handle)
+            p_cb = &bta_jv_cb.rfc_cb[handle - 1];
+    }
+    return p_cb;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_rfc_pcb
+**
+** Description  free the given port control block
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_STATUS bta_jv_free_rfc_pcb(tBTA_JV_PCB *p_pcb)
+{
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+    BOOLEAN         remove = FALSE;
+    BOOLEAN         is_server = TRUE;
+    UINT16          port_handle;
+
+    APPL_TRACE_DEBUG2( "bta_jv_free_rfc_pcb handle:%d s:%d", p_pcb->port_handle, p_pcb->state);
+
+    if (p_pcb->port_handle)
+    {
+        if(BTA_JV_ST_NONE != p_pcb->state)
+        {
+            remove = TRUE;
+            if(p_pcb->state <= BTA_JV_ST_CL_MAX)
+                is_server = FALSE;
+            port_handle = p_pcb->port_handle;
+        }
+        p_pcb->port_handle = 0;
+        p_pcb->state = BTA_JV_ST_NONE;
+
+        //Initialize congestion flags
+        p_pcb->cong = FALSE;
+
+        if(remove)
+        {
+            if(is_server)
+            {
+                if(RFCOMM_RemoveServer(port_handle) != PORT_SUCCESS)
+                    status = BTA_JV_FAILURE;
+            }
+            else
+            {
+                if(RFCOMM_RemoveConnection(port_handle) != PORT_SUCCESS)
+                    status = BTA_JV_FAILURE;
+            }
+        }
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_rfc_cb
+**
+** Description  free the given RFCOMM control block
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_STATUS bta_jv_free_rfc_cb(tBTA_JV_RFC_CB *p_cb)
+{
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+    UINT8           i;
+    APPL_TRACE_DEBUG1( "bta_jv_free_rfc_cb max_sess:%d", p_cb->max_sess);
+    for (i=0; i<p_cb->max_sess; i++)
+    {
+        APPL_TRACE_DEBUG2( "[%d]: port=%d", i, p_cb->rfc_hdl[i]);
+        if (p_cb->rfc_hdl[i])
+            bta_jv_free_rfc_pcb (&bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1]);
+    }
+
+    p_cb->scn = 0;
+    bta_jv_free_sec_id(&p_cb->sec_id);
+    p_cb->p_cback = NULL;
+    p_cb->handle = 0;
+
+    return status;
+}
+static tBTA_JV_STATUS bta_jv_free_rfc_listen_cb(tBTA_JV_RFC_CB *p_cb)
+{
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+    UINT8           i;
+    debug( "max_sess:%d", p_cb->max_sess);
+    for (i=0; i<p_cb->max_sess; i++)
+    {
+        APPL_TRACE_DEBUG2( "[%d]: port=%d", i, p_cb->rfc_hdl[i]);
+        if (p_cb->rfc_hdl[i])
+        {
+            tBTA_JV_PCB *p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1];
+            if(p_pcb->state == BTA_JV_ST_SR_LISTEN)
+            {
+                debug( "free listen pcb: scn:%d, ueser_data:%d", p_cb->scn, (int)p_pcb->user_data);
+                p_pcb->user_data = 0;
+                bta_jv_free_rfc_pcb (p_pcb);
+                p_cb->max_sess = 1;
+                break;
+            }
+        }
+    }
+    //p_cb->scn = 0;
+    bta_jv_free_sec_id(&p_cb->sec_id);
+    //p_cb->p_cback = NULL;
+    //p_cb->handle = 0;
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_l2c_cb
+**
+** Description  free the given L2CAP control block
+**
+** Returns
+**
+*******************************************************************************/
+tBTA_JV_STATUS bta_jv_free_l2c_cb(tBTA_JV_L2C_CB *p_cb)
+{
+#if 0
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+
+    if(BTA_JV_ST_NONE != p_cb->state)
+    {
+#if SDP_FOR_JV_INCLUDED == TRUE
+        if(BTA_JV_L2C_FOR_SDP_HDL == p_cb->handle)
+        {
+            bta_jv_cb.sdp_data_size = 0;
+            if(SDP_ConnClose(bta_jv_cb.sdp_for_jv))
+            {
+                bta_jv_cb.sdp_for_jv = 0;
+            }
+            else
+                status = BTA_JV_FAILURE;
+        }
+        else
+#endif
+        if(GAP_ConnClose(p_cb->handle) != BT_PASS)
+            status = BTA_JV_FAILURE;
+    }
+    p_cb->psm = 0;
+    p_cb->state = BTA_JV_ST_NONE;
+    bta_jv_free_sec_id(&p_cb->sec_id);
+    p_cb->p_cback = NULL;
+    return status;
+#endif
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_alloc_sdp_id
+**
+** Description  allocate a SDP id for the given SDP record handle
+**
+** Returns
+**
+*******************************************************************************/
+UINT32 bta_jv_alloc_sdp_id(UINT32 sdp_handle)
+{
+    int j;
+    UINT32 id = 0;
+
+    /* find a free entry */
+    for (j = 0; j < BTA_JV_MAX_SDP_REC; j++)
+    {
+        if (bta_jv_cb.sdp_handle[j] == 0)
+        {
+            bta_jv_cb.sdp_handle[j] = sdp_handle;
+            id = (UINT32)(j + 1);
+            break;
+        }
+    }
+    /* the SDP record handle reported is the (index + 1) to control block */
+    return id;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_sdp_id
+**
+** Description  free the sdp id
+**
+** Returns
+**
+*******************************************************************************/
+void bta_jv_free_sdp_id(UINT32 sdp_id)
+{
+    if(sdp_id > 0 && sdp_id <= BTA_JV_MAX_SDP_REC)
+    {
+        bta_jv_cb.sdp_handle[sdp_id - 1] = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_sdp_handle
+**
+** Description  find the SDP handle associated with the given sdp id
+**
+** Returns
+**
+*******************************************************************************/
+UINT32 bta_jv_get_sdp_handle(UINT32 sdp_id)
+{
+    UINT32 sdp_handle = 0;
+
+    if(sdp_id > 0 && sdp_id <= BTA_JV_MAX_SDP_REC)
+    {
+        sdp_handle = bta_jv_cb.sdp_handle[sdp_id - 1];
+    }
+    return sdp_handle;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_check_psm
+**
+** Description  for now use only the legal PSM per JSR82 spec
+**
+** Returns      TRUE, if allowed
+**
+*******************************************************************************/
+BOOLEAN bta_jv_check_psm(UINT16 psm)
+{
+    BOOLEAN ret = FALSE;
+
+    if(L2C_IS_VALID_PSM(psm) )
+    {
+        if(psm < 0x1001)
+        {
+            /* see if this is defined by spec */
+            switch(psm)
+            {
+            case SDP_PSM:           /* 1 */
+            case BT_PSM_RFCOMM:     /* 3 */
+                /* do not allow java app to use these 2 PSMs */
+                break;
+
+            case TCS_PSM_INTERCOM:  /* 5 */
+            case TCS_PSM_CORDLESS:  /* 7 */
+                if( FALSE == bta_sys_is_register(BTA_ID_CT) &&
+                    FALSE == bta_sys_is_register(BTA_ID_CG) )
+                    ret = TRUE;
+                break;
+
+            case BT_PSM_BNEP:       /* F */
+                if(FALSE == bta_sys_is_register(BTA_ID_PAN))
+                    ret = TRUE;
+                break;
+
+            case HID_PSM_CONTROL:   /* 0x11 */
+            case HID_PSM_INTERRUPT: /* 0x13 */
+                //FIX: allow HID Device and HID Host to coexist
+                if( FALSE == bta_sys_is_register(BTA_ID_HD) ||
+                    FALSE == bta_sys_is_register(BTA_ID_HH) )
+                    ret = TRUE;
+                break;
+
+            case AVCT_PSM:          /* 0x17 */
+            case AVDT_PSM:          /* 0x19 */
+                if ((FALSE == bta_sys_is_register(BTA_ID_AV)) &&
+                   (FALSE == bta_sys_is_register(BTA_ID_AVK)))
+                    ret = TRUE;
+                break;
+
+            default:
+                ret = TRUE;
+                break;
+            }
+        }
+        else
+            ret = TRUE;
+    }
+    return ret;
+
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_enable
+**
+** Description  Initialises the JAVA I/F
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_enable(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+    bta_jv_cb.p_dm_cback = p_data->enable.p_cback;
+    bta_jv_cb.p_dm_cback(BTA_JV_ENABLE_EVT, (tBTA_JV *)&status, 0);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_disable
+**
+** Description  Disables the BT device manager
+**              free the resources used by java
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_disable (tBTA_JV_MSG *p_data)
+{
+    int i;
+
+    bta_jv_cb.p_dm_cback = NULL;
+    /* delete the SDP records created by java apps */
+    for(i=0; i<BTA_JV_MAX_SDP_REC; i++)
+    {
+        if(bta_jv_cb.sdp_handle[i])
+        {
+            APPL_TRACE_DEBUG1( "delete SDP record: %d", bta_jv_cb.sdp_handle[i]);
+            SDP_DeleteRecord(bta_jv_cb.sdp_handle[i]);
+            bta_jv_cb.sdp_handle[i] = 0;
+        }
+    }
+
+    /* free the SCNs allocated by java apps */
+    for(i=0; i<BTA_JV_MAX_SCN; i++)
+    {
+        if(bta_jv_cb.scn[i])
+        {
+            APPL_TRACE_DEBUG1( "free scn: %d", (i+1));
+            BTM_FreeSCN((UINT8)(i+1));
+            bta_jv_cb.scn[i] = FALSE;
+        }
+    }
+
+    /* disconnect L2CAP connections */
+    for(i=0; i<BTA_JV_MAX_L2C_CONN; i++)
+    {
+        bta_jv_free_l2c_cb(&bta_jv_cb.l2c_cb[i]);
+    }
+
+    /* disconnect RFCOMM connections */
+    for(i=0; i<BTA_JV_MAX_RFC_CONN; i++)
+    {
+        bta_jv_free_rfc_cb(&bta_jv_cb.rfc_cb[i]);
+    }
+
+    /* free the service records allocated by java apps */
+    for(i=0; i<BTA_JV_NUM_SERVICE_ID; i++)
+    {
+        if(bta_jv_cb.sec_id[i])
+        {
+            BTM_SecClrService(bta_jv_cb.sec_id[i]);
+            bta_jv_cb.sec_id[i] = 0;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_set_discoverability
+**
+** Description  Sets discoverability
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_set_discoverability (tBTA_JV_MSG *p_data)
+{
+    tBTA_JV     evt_data;
+
+    evt_data.set_discover.status = BTA_JV_FAILURE;
+    /* initialize the default value for the event as the current mode */
+    evt_data.set_discover.disc_mode = BTM_ReadDiscoverability(NULL, NULL);
+
+    if(BTM_SUCCESS == BTM_SetDiscoverability((UINT8)p_data->set_discoverability.disc_mode, 0, 0))
+    {
+        evt_data.set_discover.status     = BTA_JV_SUCCESS;
+        /* update the mode, after BTM_SetDiscoverability() is successful */
+        evt_data.set_discover.disc_mode  = p_data->set_discoverability.disc_mode;
+    }
+
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_SET_DISCOVER_EVT, &evt_data, 0);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_local_device_addr
+**
+** Description  Reads the local Bluetooth device address
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_get_local_device_addr(tBTA_JV_MSG *p_data)
+{
+    BTM_ReadLocalDeviceAddr((tBTM_CMPL_CB *)bta_jv_get_local_device_addr_cback);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_local_device_name
+**
+** Description  Reads the local Bluetooth device name
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_get_local_device_name(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV evt_data;
+    char *name;
+
+    BTM_ReadLocalDeviceName(&name);
+    evt_data.p_name = (UINT8*)name;
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_LOCAL_NAME_EVT, &evt_data, 0);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_remote_device_name
+**
+** Description  Reads the local Bluetooth device name
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_get_remote_device_name(tBTA_JV_MSG *p_data)
+{
+
+    BTM_ReadRemoteDeviceName(p_data->get_rmt_name.bd_addr,
+        (tBTM_CMPL_CB *)bta_jv_get_remote_device_name_cback);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_set_service_class
+**
+** Description  update the service class field of device class
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_set_service_class (tBTA_JV_MSG *p_data)
+{
+    tBTA_UTL_COD cod;
+
+    /* set class of device */
+    /* BTA_JvSetServiceClass(UINT32 service) assumes that the service class passed to the API function as defined in the assigned number page.
+    For example: the object transfer bit is bit 20 of the 24-bit Class of device; the value of this bit is 0x00100000 (value 1)
+    Our btm_api.h defines this bit as #define BTM_COD_SERVICE_OBJ_TRANSFER        0x1000 // (value 2)
+    This reflects that the service class defined at btm is UINT16, which starts at bit 8 of the 24 bit Class of Device
+    The following statement converts from (value 1) into (value 2) */
+    cod.service = (p_data->set_service.service >> 8);
+    utl_set_device_class(&cod, BTA_UTL_SET_COD_SERVICE_CLASS);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_sec_cback
+**
+** Description  callback function to handle set encryption complete event
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_sec_cback (BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result)
+{
+    tBTA_JV_SET_ENCRYPTION  set_enc;
+    if(bta_jv_cb.p_dm_cback)
+    {
+        bdcpy(set_enc.bd_addr, bd_addr);
+        set_enc.status = result;
+        if (result > BTA_JV_BUSY)
+            set_enc.status = BTA_JV_FAILURE;
+        bta_jv_cb.p_dm_cback(BTA_JV_SET_ENCRYPTION_EVT, (tBTA_JV *)&set_enc, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_set_encryption
+**
+** Description  Reads the local Bluetooth device name
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_set_encryption(tBTA_JV_MSG *p_data)
+{
+    BTM_SetEncryption(p_data->set_encrypt.bd_addr, bta_jv_sec_cback, NULL);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_scn
+**
+** Description  obtain a free SCN
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_get_scn(tBTA_JV_MSG *p_data)
+{
+#if 0
+    UINT8   scn;
+    scn = BTM_AllocateSCN();
+    if(scn)
+        bta_jv_cb.scn[scn-1] = TRUE;
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_GET_SCN_EVT, (tBTA_JV *)&scn);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_free_scn
+**
+** Description  free a SCN
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_free_scn(tBTA_JV_MSG *p_data)
+{
+    UINT8   scn = p_data->free_scn.scn;
+
+    if (scn > 0 && scn <= BTA_JV_MAX_SCN && bta_jv_cb.scn[scn-1])
+    {
+        /* this scn is used by JV */
+        bta_jv_cb.scn[scn-1] = FALSE;
+        BTM_FreeSCN(scn);
+    }
+}
+static inline tBT_UUID shorten_sdp_uuid(const tBT_UUID* u)
+{
+    static uint8_t bt_base_uuid[] =
+       {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB };
+
+    logu("in, uuid:", u);
+    debug("uuid len:%d", u->len);
+    if(u->len == 16)
+    {
+        if(memcmp(&u->uu.uuid128[4], &bt_base_uuid[4], 12) == 0)
+        {
+            tBT_UUID su;
+            memset(&su, 0, sizeof(su));
+            if(u->uu.uuid128[0] == 0 && u->uu.uuid128[1] == 0)
+            {
+                su.len = 2;
+                uint16_t u16;
+                memcpy(&u16, &u->uu.uuid128[2], sizeof(u16));
+                su.uu.uuid16 = ntohs(u16);
+                debug("shorten to 16 bits uuid: %x", su.uu.uuid16);
+            }
+            else
+            {
+                su.len = 4;
+                uint32_t u32;
+                memcpy(&u32, &u->uu.uuid128[0], sizeof(u32));
+                su.uu.uuid32 = ntohl(u32);
+                debug("shorten to 32 bits uuid: %x", su.uu.uuid32);
+            }
+            return su;
+        }
+    }
+    debug("cannot shorten none-reserved 128 bits uuid");
+    return *u;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_start_discovery_cback
+**
+** Description  Callback for Start Discovery
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_start_discovery_cback(UINT16 result, void * user_data)
+{
+    tBTA_JV_STATUS status;
+    UINT8          old_sdp_act = bta_jv_cb.sdp_active;
+
+    debug( "bta_jv_start_discovery_cback res: 0x%x", result);
+
+    bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE;
+    if(bta_jv_cb.p_dm_cback)
+    {
+        if (old_sdp_act == BTA_JV_SDP_ACT_CANCEL)
+        {
+            debug("BTA_JV_SDP_ACT_CANCEL");
+            status = BTA_JV_SUCCESS;
+            bta_jv_cb.p_dm_cback(BTA_JV_CANCEL_DISCVRY_EVT, (tBTA_JV *)&status, user_data);
+        }
+        else
+        {
+            tBTA_JV_DISCOVERY_COMP dcomp;
+            dcomp.scn = 0;
+            status = BTA_JV_FAILURE;
+            if (result == SDP_SUCCESS || result == SDP_DB_FULL)
+            {
+                tSDP_DISC_REC       *p_sdp_rec = NULL;
+                tSDP_PROTOCOL_ELEM  pe;
+                logu("bta_jv_cb.uuid", bta_jv_cb.uuid.uu.uuid128);
+                tBT_UUID su = shorten_sdp_uuid(&bta_jv_cb.uuid);
+                logu("shorten uuid:", su.uu.uuid128);
+                p_sdp_rec = SDP_FindServiceUUIDInDb(p_bta_jv_cfg->p_sdp_db, &su, p_sdp_rec);
+                debug("p_sdp_rec:%p", p_sdp_rec);
+                if(p_sdp_rec && SDP_FindProtocolListElemInRec(p_sdp_rec, UUID_PROTOCOL_RFCOMM, &pe))
+                {
+                    dcomp.scn = (UINT8) pe.params[0];
+                    status = BTA_JV_SUCCESS;
+                }
+            }
+
+            dcomp.status = status;
+            bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&dcomp, user_data);
+        }
+        //free sdp db
+        //utl_freebuf(&(p_bta_jv_cfg->p_sdp_db));
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_start_discovery
+**
+** Description  Discovers services on a remote device
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_start_discovery(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    debug("in, sdp_active:%d", bta_jv_cb.sdp_active);
+    if (bta_jv_cb.sdp_active != BTA_JV_SDP_ACT_NONE)
+    {
+        /* SDP is still in progress */
+        status = BTA_JV_BUSY;
+        if(bta_jv_cb.p_dm_cback)
+            bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&status, p_data->start_discovery.user_data);
+        return;
+    }
+/*
+    if(p_data->start_discovery.num_uuid == 0)
+    {
+        p_data->start_discovery.num_uuid = 1;
+        p_data->start_discovery.uuid_list[0].len       = 2;
+        p_data->start_discovery.uuid_list[0].uu.uuid16 = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    }
+*/
+    /* init the database/set up the filter */
+    debug("call SDP_InitDiscoveryDb, p_data->start_discovery.num_uuid:%d",
+        p_data->start_discovery.num_uuid);
+    SDP_InitDiscoveryDb (p_bta_jv_cfg->p_sdp_db, p_bta_jv_cfg->sdp_db_size,
+                    p_data->start_discovery.num_uuid, p_data->start_discovery.uuid_list, 0, NULL);
+
+    /* tell SDP to keep the raw data */
+    p_bta_jv_cfg->p_sdp_db->raw_data = p_bta_jv_cfg->p_sdp_raw_data;
+    p_bta_jv_cfg->p_sdp_db->raw_size = p_bta_jv_cfg->sdp_raw_size;
+
+    bta_jv_cb.p_sel_raw_data     = 0;
+    bta_jv_cb.uuid = p_data->start_discovery.uuid_list[0];
+
+    bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_YES;
+    if (!SDP_ServiceSearchAttributeRequest2(p_data->start_discovery.bd_addr,
+                                   p_bta_jv_cfg->p_sdp_db,
+                                   bta_jv_start_discovery_cback, p_data->start_discovery.user_data))
+    {
+        bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_NONE;
+        /* failed to start SDP. report the failure right away */
+        if(bta_jv_cb.p_dm_cback)
+            bta_jv_cb.p_dm_cback(BTA_JV_DISCOVERY_COMP_EVT, (tBTA_JV *)&status, p_data->start_discovery.user_data);
+    }
+    /*
+    else report the result when the cback is called
+    */
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_cancel_discovery
+**
+** Description  Cancels an active discovery
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_cancel_discovery(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_SUCCESS;
+    if (bta_jv_cb.sdp_active == BTA_JV_SDP_ACT_YES)
+    {
+        if (SDP_CancelServiceSearch (p_bta_jv_cfg->p_sdp_db))
+        {
+            bta_jv_cb.sdp_active = BTA_JV_SDP_ACT_CANCEL;
+            return;
+        }
+    }
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_CANCEL_DISCVRY_EVT, (tBTA_JV *)&status, p_data->cancel_discovery.user_data);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_services_length
+**
+** Description  Obtain the length of each record in the SDP DB.
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_get_services_length(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_SERVICES_LEN    evt_data;
+    UINT8   *p, *np, *op, type;
+    UINT32  raw_used, raw_cur;
+    UINT32  len;
+
+    evt_data.num_services = -1;
+    evt_data.p_services_len = p_data->get_services_length.p_services_len;
+    if(p_bta_jv_cfg->p_sdp_db->p_first_rec)
+    {
+        /* the database is valid */
+        evt_data.num_services = 0;
+        p = p_bta_jv_cfg->p_sdp_db->raw_data;
+        raw_used = p_bta_jv_cfg->p_sdp_db->raw_used;
+        while(raw_used && p)
+        {
+            op = p;
+            type = *p++;
+            np = sdpu_get_len_from_type(p, type, &len);
+            p = np + len;
+            raw_cur = p - op;
+            if(raw_used >= raw_cur)
+            {
+                raw_used -= raw_cur;
+            }
+            else
+            {
+                /* error. can not continue */
+                break;
+            }
+            if(p_data->get_services_length.inc_hdr)
+            {
+                evt_data.p_services_len[evt_data.num_services++] = len + np - op;
+            }
+            else
+            {
+                evt_data.p_services_len[evt_data.num_services++] = len;
+            }
+        } /* end of while */
+    }
+
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_SERVICES_LEN_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_service_select
+**
+** Description  Obtain the length of given UUID in the SDP DB.
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_service_select(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_SERVICE_SEL     serv_sel;
+    tSDP_DISC_REC *p_rec, *p_tmp;
+    UINT8   *p, *np, *op, type;
+    UINT32  raw_used, raw_cur;
+    UINT32  len;
+
+    serv_sel.service_len = 0;
+    bta_jv_cb.p_sel_raw_data     = 0;
+    p_rec = SDP_FindServiceInDb (p_bta_jv_cfg->p_sdp_db, p_data->service_select.uuid, NULL);
+    if(p_rec)
+    {
+        /* found the record in the database */
+        /* the database must be valid */
+        p = p_bta_jv_cfg->p_sdp_db->raw_data;
+        raw_used = p_bta_jv_cfg->p_sdp_db->raw_used;
+        p_tmp = p_bta_jv_cfg->p_sdp_db->p_first_rec;
+        while(raw_used && p && p_tmp)
+        {
+            op = p;
+            type = *p++;
+            np = sdpu_get_len_from_type(p, type, &len);
+            if(p_tmp == p_rec)
+            {
+                bta_jv_cb.p_sel_raw_data = op;
+                bta_jv_cb.sel_len = len;
+                serv_sel.service_len = len;
+                bdcpy(serv_sel.bd_addr, p_rec->remote_bd_addr);
+                APPL_TRACE_DEBUG1( "bta_jv_service_select found uuid: 0x%x",
+                    p_data->service_select.uuid);
+                break;
+            }
+            p = np + len;
+            raw_cur = p - op;
+            if(raw_used >= raw_cur)
+            {
+                raw_used -= raw_cur;
+            }
+            else
+            {
+                /* error. can not continue */
+                break;
+            }
+            p_tmp = p_tmp->p_next_rec;
+        } /* end of while */
+    }
+    APPL_TRACE_DEBUG1( "service_len: %d", serv_sel.service_len);
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_SERVICE_SEL_EVT, (tBTA_JV *)&serv_sel);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_create_record
+**
+** Description  Create an SDP record with the given attributes
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_create_record(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_API_CREATE_RECORD *cr = &(p_data->create_record);
+    tBTA_JV_CREATE_RECORD   evt_data;
+    evt_data.status = BTA_JV_SUCCESS;
+    if(bta_jv_cb.p_dm_cback)
+        //callback user immediately to create his own sdp record in stack thread context
+        bta_jv_cb.p_dm_cback(BTA_JV_CREATE_RECORD_EVT, (tBTA_JV *)&evt_data, cr->user_data);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_update_record
+**
+** Description  Update an SDP record with the given attributes
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_update_record(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_API_UPDATE_RECORD *ur = &(p_data->update_record);
+    tBTA_JV_UPDATE_RECORD   evt_data;
+    UINT32 handle;
+    INT32 i;
+    UINT8 *ptr;
+    UINT8 *next_ptr;
+    UINT8 *end;
+    UINT32 len;
+    UINT8 type;
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = ur->handle;
+
+    handle = bta_jv_get_sdp_handle(ur->handle);
+
+    if(handle)
+    {
+        /* this is a record created by JV */
+        for (i = 0; i < ur->array_len; i++)
+        {
+            ptr = ur->p_values[i];
+            end = ptr + ur->p_value_sizes[i];
+
+            while (ptr < end)
+            {
+                type = *ptr;
+                next_ptr = sdpu_get_len_from_type(ptr + 1, *ptr, &len);
+
+                if(ATTR_ID_SERVICE_RECORD_HDL != ur->p_ids[i])
+                {
+                if (!SDP_AddAttribute(handle, ur->p_ids[i], (UINT8)((type >> 3) & 0x1f),
+                    len, next_ptr))
+                {
+                    /* failed on updating attributes.  */
+                    if(bta_jv_cb.p_dm_cback)
+                        bta_jv_cb.p_dm_cback(BTA_JV_UPDATE_RECORD_EVT, (tBTA_JV *)&evt_data);
+                    return;
+                }
+                }
+
+                ptr = next_ptr + len;
+            } /* end of while */
+        } /* end of for */
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_UPDATE_RECORD_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_add_attribute
+**
+** Description  Add an attribute to an SDP record
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_add_attribute(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_API_ADD_ATTRIBUTE *aa = &(p_data->add_attr);
+    tBTA_JV_ADD_ATTR   evt_data;
+    UINT32 handle;
+    UINT8 type;
+    UINT32 len;
+    UINT8 *ptr;
+    UINT8 *next_ptr;
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = aa->handle;
+    handle = bta_jv_get_sdp_handle(aa->handle);
+
+    if(handle)
+    {
+        /* this is a record created by JV */
+        ptr = aa->p_value;
+        type = *ptr;
+        next_ptr = sdpu_get_len_from_type(ptr + 1, *ptr, &len);
+        APPL_TRACE_DEBUG3( "bta_jv_add_attribute: ptr chg:%d len:%d, size:%d",
+            (next_ptr - ptr), len, aa->value_size);
+        if(ATTR_ID_SERVICE_RECORD_HDL != aa->attr_id && /* do not allow the SDP record handle to be updated */
+            ((INT32)(next_ptr - ptr + len) == aa->value_size) && /* double check data size */
+            SDP_AddAttribute(handle, aa->attr_id, (UINT8)((type >> 3) & 0x1f),
+                    len, next_ptr))
+        {
+            evt_data.status = BTA_JV_SUCCESS;
+        }
+    }
+
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_ADD_ATTR_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_delete_attribute
+**
+** Description  Delete an attribute from the given SDP record
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_delete_attribute(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_API_ADD_ATTRIBUTE *da = &(p_data->add_attr);
+    tBTA_JV_DELETE_ATTR   evt_data;
+    UINT32 handle;
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = da->handle;
+    handle = bta_jv_get_sdp_handle(da->handle);
+
+    if(handle)
+    {
+        /* this is a record created by JV */
+        if(SDP_DeleteAttribute(handle, da->attr_id))
+            evt_data.status = BTA_JV_SUCCESS;
+    }
+
+    if(bta_jv_cb.p_dm_cback)
+        bta_jv_cb.p_dm_cback(BTA_JV_DELETE_ATTR_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_delete_record
+**
+** Description  Delete an SDP record
+**
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_delete_record(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_API_ADD_ATTRIBUTE *dr = &(p_data->add_attr);
+    UINT32 handle;
+
+    handle = bta_jv_get_sdp_handle(dr->handle);
+
+    if(handle)
+    {
+        /* this is a record created by JV */
+        SDP_DeleteRecord(handle);
+        bta_jv_free_sdp_id(dr->handle);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_client_cback
+**
+** Description  handles the l2cap client events
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_l2cap_client_cback(UINT16 gap_handle, UINT16 event)
+{
+#if 0
+    tBTA_JV_L2C_CB  *p_cb = &bta_jv_cb.l2c_cb[gap_handle];
+    tBTA_JV     evt_data;
+
+    if(gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback)
+        return;
+
+    APPL_TRACE_DEBUG2( "bta_jv_l2cap_client_cback: %d evt:x%x",
+        gap_handle, event);
+    evt_data.l2c_open.status = BTA_JV_SUCCESS;
+    evt_data.l2c_open.handle = gap_handle;
+    switch (event)
+    {
+    case GAP_EVT_CONN_OPENED:
+        bdcpy(evt_data.l2c_open.rem_bda, GAP_ConnGetRemoteAddr(gap_handle));
+        evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle);
+        p_cb->state = BTA_JV_ST_CL_OPEN;
+        p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data);
+        break;
+
+    case GAP_EVT_CONN_CLOSED:
+        p_cb->state = BTA_JV_ST_NONE;
+        bta_jv_free_sec_id(&p_cb->sec_id);
+        evt_data.l2c_close.async = TRUE;
+        p_cb->p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data);
+        p_cb->p_cback = NULL;
+        break;
+
+    case GAP_EVT_CONN_DATA_AVAIL:
+        evt_data.handle = gap_handle;
+        p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data);
+        break;
+
+    case GAP_EVT_CONN_CONGESTED:
+    case GAP_EVT_CONN_UNCONGESTED:
+        p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? TRUE : FALSE;
+        evt_data.l2c_cong.cong = p_cb->cong;
+        p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data);
+        break;
+
+    default:
+        break;
+    }
+#endif
+}
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function     bta_jv_sdp_res_cback
+**
+** Description  Callback for Start Discovery
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_sdp_res_cback (UINT16 event, tSDP_DATA *p_data)
+{
+    tBTA_JV evt_data;
+    tBTA_JV_L2C_CB  *p_cb = &bta_jv_cb.l2c_cb[BTA_JV_L2C_FOR_SDP_HDL];
+
+    APPL_TRACE_DEBUG2( "bta_jv_sdp_res_cback: %d evt:x%x",
+        bta_jv_cb.sdp_for_jv, event);
+
+    if(!bta_jv_cb.sdp_for_jv)
+        return;
+
+    evt_data.l2c_open.status = BTA_JV_SUCCESS;
+    evt_data.l2c_open.handle = BTA_JV_L2C_FOR_SDP_HDL;
+
+    switch(event)
+    {
+    case SDP_EVT_OPEN:
+        bdcpy(evt_data.l2c_open.rem_bda, p_data->open.peer_addr);
+        evt_data.l2c_open.tx_mtu = p_data->open.peer_mtu;
+        p_cb->state = BTA_JV_ST_SR_OPEN;
+        p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data);
+        break;
+    case SDP_EVT_DATA_IND:
+        evt_data.handle = BTA_JV_L2C_FOR_SDP_HDL;
+        memcpy(p_bta_jv_cfg->p_sdp_raw_data, p_data->data.p_data, p_data->data.data_len);
+        APPL_TRACE_DEBUG2( "data size: %d/%d ", bta_jv_cb.sdp_data_size, p_data->data.data_len);
+        bta_jv_cb.sdp_data_size = p_data->data.data_len;
+        p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data);
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_sdp_cback
+**
+** Description  Callback for Start Discovery
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_sdp_cback(UINT16 result)
+{
+    tBTA_JV_L2CAP_CLOSE close;
+    tBTA_JV_L2C_CB  *p_cb = &bta_jv_cb.l2c_cb[BTA_JV_L2C_FOR_SDP_HDL];
+    APPL_TRACE_DEBUG1( "bta_jv_sdp_cback: result:x%x", result);
+
+    if(p_cb->p_cback)
+    {
+        close.handle    = BTA_JV_L2C_FOR_SDP_HDL;
+        close.async     = FALSE;
+        close.status    = BTA_JV_SUCCESS;
+        bta_jv_free_sec_id(&p_cb->sec_id);
+        p_cb->p_cback(BTA_JV_L2CAP_CLOSE_EVT, (tBTA_JV *)&close);
+    }
+
+    bta_jv_cb.sdp_for_jv = 0;
+    p_cb->p_cback = NULL;
+
+}
+#endif
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_connect
+**
+** Description  makes an l2cap client connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_connect(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2C_CB      *p_cb;
+    tBTA_JV_L2CAP_CL_INIT  evt_data;
+    UINT16  handle=GAP_INVALID_HANDLE;
+    UINT8   sec_id;
+    tL2CAP_CFG_INFO cfg;
+    tBTA_JV_API_L2CAP_CONNECT *cc = &(p_data->l2cap_connect);
+
+    memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+    cfg.mtu_present = TRUE;
+    cfg.mtu = cc->rx_mtu;
+    /* TODO: DM role manager
+    L2CA_SetDesireRole(cc->role);
+    */
+
+    sec_id = bta_jv_alloc_sec_id();
+    evt_data.sec_id = sec_id;
+    evt_data.status = BTA_JV_FAILURE;
+    if (sec_id)
+    {
+#if SDP_FOR_JV_INCLUDED == TRUE
+        if(SDP_PSM == cc->remote_psm && 0 == bta_jv_cb.sdp_for_jv)
+        {
+            bta_jv_cb.sdp_for_jv = SDP_ConnOpen(cc->peer_bd_addr,
+                                       bta_jv_sdp_res_cback,
+                                       bta_jv_sdp_cback);
+            if(bta_jv_cb.sdp_for_jv)
+            {
+                bta_jv_cb.sdp_data_size = 0;
+                handle = BTA_JV_L2C_FOR_SDP_HDL;
+                evt_data.status = BTA_JV_SUCCESS;
+            }
+        }
+        else
+#endif
+        if(bta_jv_check_psm(cc->remote_psm)) /* allowed */
+        {
+            if( (handle = GAP_ConnOpen("", sec_id, 0, cc->peer_bd_addr, cc->remote_psm,
+                &cfg, cc->sec_mask, GAP_FCR_CHAN_OPT_BASIC,
+                bta_jv_l2cap_client_cback)) != GAP_INVALID_HANDLE )
+            {
+                evt_data.status = BTA_JV_SUCCESS;
+            }
+        }
+    }
+
+    if (evt_data.status == BTA_JV_SUCCESS)
+    {
+        p_cb = &bta_jv_cb.l2c_cb[handle];
+        p_cb->handle = handle;
+        p_cb->p_cback = cc->p_cback;
+        p_cb->psm = 0;  /* not a server */
+        p_cb->sec_id = sec_id;
+        p_cb->state = BTA_JV_ST_CL_OPENING;
+    }
+    else
+    {
+        bta_jv_free_sec_id(&sec_id);
+    }
+    evt_data.handle = handle;
+    cc->p_cback(BTA_JV_L2CAP_CL_INIT_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_close
+**
+** Description  Close an L2CAP client connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_close(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2CAP_CLOSE  evt_data;
+    tBTA_JV_API_L2CAP_CLOSE *cc = &(p_data->l2cap_close);
+    tBTA_JV_L2CAP_CBACK *p_cback = cc->p_cb->p_cback;
+
+    evt_data.handle = cc->handle;
+    evt_data.status = bta_jv_free_l2c_cb(cc->p_cb);
+    evt_data.async = FALSE;
+
+    if (p_cback)
+        p_cback(BTA_JV_L2CAP_CLOSE_EVT, (tBTA_JV *)&evt_data);
+    else
+        APPL_TRACE_ERROR0("### NO CALLBACK SET !!! ###");
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_jv_l2cap_server_cback
+**
+** Description      handles the l2cap server callback
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_jv_l2cap_server_cback(UINT16 gap_handle, UINT16 event)
+{
+#if 0
+    tBTA_JV_L2C_CB  *p_cb = &bta_jv_cb.l2c_cb[gap_handle];
+    tBTA_JV evt_data;
+    tBTA_JV_L2CAP_CBACK *p_cback;
+
+    if(gap_handle >= BTA_JV_MAX_L2C_CONN && !p_cb->p_cback)
+        return;
+
+    APPL_TRACE_DEBUG2( "bta_jv_l2cap_server_cback: %d evt:x%x",
+        gap_handle, event);
+    evt_data.l2c_open.status = BTA_JV_SUCCESS;
+    evt_data.l2c_open.handle = gap_handle;
+
+    switch (event)
+    {
+    case GAP_EVT_CONN_OPENED:
+        bdcpy(evt_data.l2c_open.rem_bda, GAP_ConnGetRemoteAddr(gap_handle));
+        evt_data.l2c_open.tx_mtu = GAP_ConnGetRemMtuSize(gap_handle);
+        p_cb->state = BTA_JV_ST_SR_OPEN;
+        p_cb->p_cback(BTA_JV_L2CAP_OPEN_EVT, &evt_data);
+        break;
+
+    case GAP_EVT_CONN_CLOSED:
+        evt_data.l2c_close.async = TRUE;
+        evt_data.l2c_close.handle = p_cb->handle;
+        p_cback = p_cb->p_cback;
+        evt_data.l2c_close.status = bta_jv_free_l2c_cb(p_cb);
+        p_cback(BTA_JV_L2CAP_CLOSE_EVT, &evt_data);
+        break;
+
+    case GAP_EVT_CONN_DATA_AVAIL:
+        evt_data.handle = gap_handle;
+        p_cb->p_cback(BTA_JV_L2CAP_DATA_IND_EVT, &evt_data);
+        break;
+
+    case GAP_EVT_CONN_CONGESTED:
+    case GAP_EVT_CONN_UNCONGESTED:
+        p_cb->cong = (event == GAP_EVT_CONN_CONGESTED) ? TRUE : FALSE;
+        evt_data.l2c_cong.cong = p_cb->cong;
+        p_cb->p_cback(BTA_JV_L2CAP_CONG_EVT, &evt_data);
+        break;
+
+    default:
+        break;
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_start_server
+**
+** Description  starts an L2CAP server
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_start_server(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2C_CB      *p_cb;
+    UINT8   sec_id;
+    UINT16  handle;
+    tL2CAP_CFG_INFO cfg;
+    tBTA_JV_L2CAP_START evt_data;
+    tBTA_JV_API_L2CAP_SERVER *ls = &(p_data->l2cap_server);
+
+    memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+
+    //FIX: MTU=0 means not present
+    if (ls->rx_mtu >0)
+    {
+        cfg.mtu_present = TRUE;
+        cfg.mtu = ls->rx_mtu;
+    }
+    else
+    {
+        cfg.mtu_present = FALSE;
+        cfg.mtu = 0;
+    }
+
+    /* TODO DM role manager
+    L2CA_SetDesireRole(ls->role);
+    */
+
+    sec_id = bta_jv_alloc_sec_id();
+    if (0 == sec_id || (FALSE == bta_jv_check_psm(ls->local_psm)) ||
+        (handle = GAP_ConnOpen("JV L2CAP", sec_id, 1, 0, ls->local_psm, &cfg,
+            ls->sec_mask, GAP_FCR_CHAN_OPT_BASIC, bta_jv_l2cap_server_cback)) == GAP_INVALID_HANDLE)
+    {
+        bta_jv_free_sec_id(&sec_id);
+        evt_data.status = BTA_JV_FAILURE;
+    }
+    else
+    {
+        /* default JV implementation requires explicit call
+           to allow incoming connections when ready*/
+
+        GAP_SetAcceptReady(handle, FALSE);
+
+        p_cb = &bta_jv_cb.l2c_cb[handle];
+        evt_data.status = BTA_JV_SUCCESS;
+        evt_data.handle = handle;
+        evt_data.sec_id = sec_id;
+        p_cb->p_cback = ls->p_cback;
+        p_cb->handle = handle;
+        p_cb->sec_id = sec_id;
+        p_cb->state = BTA_JV_ST_SR_LISTEN;
+        p_cb->psm = ls->local_psm;
+    }
+    ls->p_cback(BTA_JV_L2CAP_START_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_stop_server
+**
+** Description  stops an L2CAP server
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_stop_server(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2C_CB      *p_cb;
+    tBTA_JV_L2CAP_CLOSE  evt_data;
+    tBTA_JV_API_L2CAP_SERVER *ls = &(p_data->l2cap_server);
+    tBTA_JV_L2CAP_CBACK *p_cback;
+    int i;
+
+    for(i=0; i<BTA_JV_MAX_L2C_CONN; i++)
+    {
+        if(bta_jv_cb.l2c_cb[i].psm == ls->local_psm)
+        {
+            p_cb = &bta_jv_cb.l2c_cb[i];
+            p_cback = p_cb->p_cback;
+            evt_data.handle = p_cb->handle;
+            evt_data.status = bta_jv_free_l2c_cb(p_cb);
+            evt_data.async = FALSE;
+            p_cback(BTA_JV_L2CAP_CLOSE_EVT, (tBTA_JV *)&evt_data);
+            break;
+        }
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_read
+**
+** Description  Read data from an L2CAP connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_read(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2CAP_READ evt_data;
+    tBTA_JV_API_L2CAP_READ *rc = &(p_data->l2cap_read);
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = rc->handle;
+    evt_data.req_id = rc->req_id;
+    evt_data.p_data = rc->p_data;
+    evt_data.len    = 0;
+#if SDP_FOR_JV_INCLUDED == TRUE
+    if(BTA_JV_L2C_FOR_SDP_HDL == rc->handle)
+    {
+        evt_data.len = rc->len;
+        if(evt_data.len > bta_jv_cb.sdp_data_size)
+            evt_data.len = bta_jv_cb.sdp_data_size;
+
+        memcpy(rc->p_data, p_bta_jv_cfg->p_sdp_raw_data, evt_data.len);
+        bta_jv_cb.sdp_data_size = 0;
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+    else
+#endif
+    if (BT_PASS == GAP_ConnReadData(rc->handle, rc->p_data, rc->len, &evt_data.len))
+    {
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+
+    rc->p_cback(BTA_JV_L2CAP_READ_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function     bta_jv_l2cap_write
+**
+** Description  Write data to an L2CAP connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_l2cap_write(tBTA_JV_MSG *p_data)
+{
+#if 0
+    tBTA_JV_L2CAP_WRITE evt_data;
+    tBTA_JV_API_L2CAP_WRITE *ls = &(p_data->l2cap_write);
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = ls->handle;
+    evt_data.req_id = ls->req_id;
+    evt_data.cong   = ls->p_cb->cong;
+    evt_data.len    = 0;
+#if SDP_FOR_JV_INCLUDED == TRUE
+    if(BTA_JV_L2C_FOR_SDP_HDL == ls->handle)
+    {
+        UINT8   *p;
+        BT_HDR  *p_msg = (BT_HDR *) GKI_getbuf ((UINT16)(ls->len + BT_HDR_SIZE + L2CAP_MIN_OFFSET));
+        if(p_msg)
+        {
+            p_msg->offset = L2CAP_MIN_OFFSET;
+            p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+            p_msg->len = ls->len;
+            memcpy(p, ls->p_data, p_msg->len);
+            if(SDP_WriteData (bta_jv_cb.sdp_for_jv, p_msg))
+            {
+                evt_data.len    = ls->len;
+                evt_data.status = BTA_JV_SUCCESS;
+            }
+        }
+    }
+    else
+#endif
+    if (!evt_data.cong &&
+        BT_PASS == GAP_ConnWriteData(ls->handle, ls->p_data, ls->len, &evt_data.len))
+    {
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+
+    ls->p_cb->p_cback(BTA_JV_L2CAP_WRITE_EVT, (tBTA_JV *)&evt_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_port_data_co_cback
+**
+** Description  port data callback function of rfcomm
+**              connections
+**
+** Returns      void
+**
+*******************************************************************************/
+/*
+#define DATA_CO_CALLBACK_TYPE_INCOMING          1
+#define DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE     2
+#define DATA_CO_CALLBACK_TYPE_OUTGOING          3
+*/
+static int bta_jv_port_data_co_cback(UINT16 port_handle, UINT8 *buf, UINT16 len, int type)
+{
+    tBTA_JV_RFC_CB  *p_cb = bta_jv_rfc_port_to_cb(port_handle);
+    tBTA_JV_PCB     *p_pcb = bta_jv_rfc_port_to_pcb(port_handle);
+
+    if (p_cb != NULL)
+    {
+        switch(type)
+        {
+            case DATA_CO_CALLBACK_TYPE_INCOMING:
+                return bta_co_rfc_data_incoming(p_pcb->user_data, (BT_HDR*)buf);
+            case DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE:
+                return bta_co_rfc_data_outgoing_size(p_pcb->user_data, (int*)buf);
+            case DATA_CO_CALLBACK_TYPE_OUTGOING:
+                return bta_co_rfc_data_outgoing(p_pcb->user_data, buf, len);
+            default:
+                APPL_TRACE_ERROR1("unknown callout type:%d", type);
+                break;
+        }
+    }
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_port_mgmt_cl_cback
+**
+** Description  callback for port mamangement function of rfcomm
+**              client connections
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_port_mgmt_cl_cback(UINT32 code, UINT16 port_handle)
+{
+    tBTA_JV_RFC_CB  *p_cb = bta_jv_rfc_port_to_cb(port_handle);
+    tBTA_JV_PCB     *p_pcb = bta_jv_rfc_port_to_pcb(port_handle);
+    tBTA_JV evt_data;
+    BD_ADDR rem_bda;
+    UINT16 lcid;
+    tBTA_JV_RFCOMM_CBACK *p_cback;  /* the callback function */
+
+    APPL_TRACE_DEBUG1( "bta_jv_port_mgmt_cl_cback:%d", port_handle);
+    if(NULL == p_cb || NULL == p_cb->p_cback)
+        return;
+
+    APPL_TRACE_DEBUG3( "bta_jv_port_mgmt_cl_cback code=%d port_handle:%d handle:%d",
+        code, port_handle, p_cb->handle);
+
+    PORT_CheckConnection(port_handle, rem_bda, &lcid);
+
+    if(code == PORT_SUCCESS)
+    {
+        evt_data.rfc_open.handle = p_cb->handle;
+        evt_data.rfc_open.status = BTA_JV_SUCCESS;
+        bdcpy(evt_data.rfc_open.rem_bda, rem_bda);
+        p_pcb->state = BTA_JV_ST_CL_OPEN;
+        p_cb->p_cback(BTA_JV_RFCOMM_OPEN_EVT, &evt_data, p_pcb->user_data);
+    }
+    else
+    {
+        evt_data.rfc_close.handle = p_cb->handle;
+        evt_data.rfc_close.status = BTA_JV_FAILURE;
+        evt_data.rfc_close.port_status = code;
+        evt_data.rfc_close.async = TRUE;
+        if (p_pcb->state == BTA_JV_ST_CL_CLOSING)
+        {
+            evt_data.rfc_close.async = FALSE;
+        }
+        p_pcb->state = BTA_JV_ST_NONE;
+        p_pcb->cong = FALSE;
+        p_cback = p_cb->p_cback;
+        bta_jv_free_rfc_cb(p_cb);
+
+        p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, p_pcb->user_data);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_port_event_cl_cback
+**
+** Description  Callback for RFCOMM client port events
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_port_event_cl_cback(UINT32 code, UINT16 port_handle)
+{
+    tBTA_JV_RFC_CB  *p_cb = bta_jv_rfc_port_to_cb(port_handle);
+    tBTA_JV_PCB     *p_pcb = bta_jv_rfc_port_to_pcb(port_handle);
+    tBTA_JV evt_data;
+
+    APPL_TRACE_DEBUG1( "bta_jv_port_event_cl_cback:%d", port_handle);
+    if(NULL == p_cb || NULL == p_cb->p_cback)
+        return;
+
+    APPL_TRACE_DEBUG3( "bta_jv_port_event_cl_cback code=x%x port_handle:%d handle:%d",
+        code, port_handle, p_cb->handle);
+    if (code & PORT_EV_RXCHAR)
+    {
+        evt_data.data_ind.handle = p_cb->handle;
+        p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, p_pcb->user_data);
+    }
+
+    if (code & PORT_EV_FC)
+    {
+        p_pcb->cong = (code & PORT_EV_FCS) ? FALSE : TRUE;
+        evt_data.rfc_cong.cong = p_pcb->cong;
+        evt_data.rfc_cong.handle = p_cb->handle;
+        evt_data.rfc_cong.status = BTA_JV_SUCCESS;
+        p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, p_pcb->user_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_connect
+**
+** Description  Client initiates an RFCOMM connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_rfcomm_connect(tBTA_JV_MSG *p_data)
+{
+    UINT16 handle = 0;
+    UINT32 event_mask = (PORT_EV_RXCHAR | PORT_EV_FC | PORT_EV_FCS);
+    tPORT_STATE port_state;
+    UINT8   sec_id;
+    tBTA_JV_RFC_CB  *p_cb = NULL;
+    tBTA_JV_PCB     *p_pcb;
+    tBTA_JV_API_RFCOMM_CONNECT *cc = &(p_data->rfcomm_connect);
+    tBTA_JV_RFCOMM_CL_INIT      evt_data;
+
+    /* TODO DM role manager
+    L2CA_SetDesireRole(cc->role);
+    */
+
+    sec_id = bta_jv_alloc_sec_id();
+    evt_data.sec_id = sec_id;
+    evt_data.status = BTA_JV_SUCCESS;
+    if (0 == sec_id ||
+        BTM_SetSecurityLevel(TRUE, "", sec_id,  cc->sec_mask, BT_PSM_RFCOMM,
+                BTM_SEC_PROTO_RFCOMM, cc->remote_scn) == FALSE)
+    {
+        evt_data.status = BTA_JV_FAILURE;
+        error("sec_id:%d is zero or BTM_SetSecurityLevel failed, remote_scn:%d", sec_id, cc->remote_scn);
+    }
+
+    if (evt_data.status == BTA_JV_SUCCESS &&
+        RFCOMM_CreateConnection(UUID_SERVCLASS_SERIAL_PORT, cc->remote_scn, FALSE,
+        BTA_JV_DEF_RFC_MTU, cc->peer_bd_addr, &handle, bta_jv_port_mgmt_cl_cback) != PORT_SUCCESS)
+    {
+        evt_data.status = BTA_JV_FAILURE;
+    }
+    if (evt_data.status == BTA_JV_SUCCESS)
+    {
+        p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb);
+        if(p_cb)
+        {
+            p_cb->p_cback = cc->p_cback;
+            p_cb->sec_id = sec_id;
+            p_cb->scn = 0;
+            p_pcb->state = BTA_JV_ST_CL_OPENING;
+            p_pcb->user_data = cc->user_data;
+            evt_data.use_co = TRUE;
+
+            PORT_SetEventCallback(handle, bta_jv_port_event_cl_cback);
+            PORT_SetEventMask(handle, event_mask);
+            PORT_SetDataCOCallback (handle, bta_jv_port_data_co_cback);
+
+            PORT_GetState(handle, &port_state);
+
+            port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT);
+
+            /* coverity[uninit_use_in_call]
+               FALSE-POSITIVE: port_state is initialized at PORT_GetState() */
+            PORT_SetState(handle, &port_state);
+
+            evt_data.handle = p_cb->handle;
+        }
+        else
+        {
+            evt_data.status = BTA_JV_FAILURE;
+            APPL_TRACE_ERROR0("run out of rfc control block");
+        }
+    }
+    cc->p_cback(BTA_JV_RFCOMM_CL_INIT_EVT, (tBTA_JV *)&evt_data, cc->user_data);
+ }
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_close
+**
+** Description  Close an RFCOMM connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_rfcomm_close(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_RFCOMM_CLOSE     evt_data;
+    tBTA_JV_API_RFCOMM_CLOSE *cc = &(p_data->rfcomm_close);
+    tBTA_JV_RFC_CB           *p_cb = cc->p_cb;
+    tBTA_JV_PCB              *p_pcb = cc->p_pcb;
+    tBTA_JV_RFCOMM_CBACK     *p_cback = p_cb->p_cback;
+
+    evt_data.handle = p_cb->handle;
+    evt_data.status = BTA_JV_FAILURE;
+
+    void* user_data = p_pcb->user_data;
+    p_pcb->cong = FALSE;
+    if(p_pcb->state <= BTA_JV_ST_CL_MAX)
+    {
+        if(p_pcb->state == BTA_JV_ST_CL_OPEN)
+        {
+            if(PORT_SUCCESS == RFCOMM_RemoveConnection(p_pcb->port_handle))
+            {
+                p_pcb->state = BTA_JV_ST_CL_CLOSING;
+                return;
+            }
+        }
+        evt_data.status = bta_jv_free_rfc_cb(p_cb);
+    }
+    else if(BTA_JV_ST_SR_OPEN == p_pcb->state)
+    {
+        /* server is connected */
+        if(PORT_SUCCESS == RFCOMM_RemoveConnection(p_pcb->port_handle))
+        {
+            p_pcb->state = BTA_JV_ST_SR_CLOSING;
+            return;
+        }
+    }
+
+    evt_data.async = FALSE;
+
+    if (p_cback)
+        p_cback(BTA_JV_RFCOMM_CLOSE_EVT, (tBTA_JV *)&evt_data, user_data);
+    else
+        error("### NO CALLBACK SET !!! ###");
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_get_num_rfc_listen
+**
+** Description  when a RFCOMM connection goes down, make sure that there's only
+**              one port stays listening on this scn.
+**
+** Returns
+**
+*******************************************************************************/
+static UINT8 bta_jv_get_num_rfc_listen(tBTA_JV_RFC_CB *p_cb)
+{
+    UINT8   i, listen=1;
+    tBTA_JV_PCB *p_pcb;
+
+    if (p_cb->max_sess > 1)
+    {
+        listen = 0;
+        for (i=0; i<p_cb->max_sess; i++)
+        {
+            if (p_cb->rfc_hdl[i] != 0)
+            {
+                p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1];
+                if (BTA_JV_ST_SR_LISTEN == p_pcb->state)
+                {
+                    listen++;
+                }
+            }
+        }
+    }
+    return listen;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_port_mgmt_sr_cback
+**
+** Description  callback for port mamangement function of rfcomm
+**              server connections
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_port_mgmt_sr_cback(UINT32 code, UINT16 port_handle)
+{
+    tBTA_JV_PCB     *p_pcb = bta_jv_rfc_port_to_pcb(port_handle);
+    tBTA_JV_RFC_CB  *p_cb = bta_jv_rfc_port_to_cb(port_handle);
+    tBTA_JV evt_data;
+    BD_ADDR rem_bda;
+    UINT16 lcid;
+    UINT8  num;
+    tBTA_JV_RFCOMM_CBACK    *p_cback;
+    UINT32  si;
+
+    if(NULL == p_cb || NULL == p_cb->p_cback)
+        return;
+    void *user_data = p_pcb->user_data;
+    APPL_TRACE_DEBUG4( "bta_jv_port_mgmt_sr_cback code=%d port_handle:%d handle:%d/0x%x",
+        code, port_handle, p_cb->handle, p_pcb->handle);
+
+    PORT_CheckConnection(port_handle, rem_bda, &lcid);
+    int failed = TRUE;
+    if(code == PORT_SUCCESS)
+    {
+        evt_data.rfc_srv_open.handle = p_pcb->handle;
+        evt_data.rfc_srv_open.status = BTA_JV_SUCCESS;
+        bdcpy(evt_data.rfc_srv_open.rem_bda, rem_bda);
+        p_pcb->state = BTA_JV_ST_SR_OPEN;
+        tBTA_JV_PCB *p_pcb_new_listen  = bta_jv_add_rfc_port(p_cb);
+        if(p_pcb_new_listen)
+        {
+            evt_data.rfc_srv_open.new_listen_handle = p_pcb_new_listen->handle;
+            p_pcb_new_listen->user_data = p_cb->p_cback(BTA_JV_RFCOMM_SRV_OPEN_EVT, &evt_data, user_data);
+            failed = FALSE;
+        }
+        else error("bta_jv_add_rfc_port failed to create new listen port");
+    }
+    if(failed)
+    {
+        evt_data.rfc_close.handle = p_cb->handle;
+        evt_data.rfc_close.status = BTA_JV_SUCCESS;
+        evt_data.rfc_close.async = TRUE;
+        if(BTA_JV_ST_SR_CLOSING == p_pcb->state)
+        {
+            evt_data.rfc_close.async = FALSE;
+        }
+        p_pcb->cong = FALSE;
+        p_cback = p_cb->p_cback;
+        APPL_TRACE_DEBUG1( "removing rfc handle:0x%x", p_pcb->handle);
+        si = BTA_JV_RFC_HDL_TO_SIDX(p_pcb->handle);
+        p_cb->rfc_hdl[si] = 0;
+        p_pcb->state = BTA_JV_ST_NONE;
+        p_pcb->handle = 0;
+        RFCOMM_RemoveServer(port_handle);
+        evt_data.rfc_close.port_status = code;
+        p_cback(BTA_JV_RFCOMM_CLOSE_EVT, &evt_data, user_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_port_event_sr_cback
+**
+** Description  Callback for RFCOMM server port events
+**
+** Returns      void
+**
+*******************************************************************************/
+static void bta_jv_port_event_sr_cback(UINT32 code, UINT16 port_handle)
+{
+    tBTA_JV_PCB     *p_pcb = bta_jv_rfc_port_to_pcb(port_handle);
+    tBTA_JV_RFC_CB  *p_cb = bta_jv_rfc_port_to_cb(port_handle);
+    tBTA_JV evt_data;
+
+    if(NULL == p_cb || NULL == p_cb->p_cback)
+        return;
+
+    APPL_TRACE_DEBUG3( "bta_jv_port_event_sr_cback code=x%x port_handle:%d handle:%d",
+        code, port_handle, p_cb->handle);
+
+    void *user_data = p_pcb->user_data;
+    if (code & PORT_EV_RXCHAR)
+    {
+        evt_data.data_ind.handle = p_cb->handle;
+        p_cb->p_cback(BTA_JV_RFCOMM_DATA_IND_EVT, &evt_data, user_data);
+    }
+
+    if (code & PORT_EV_FC)
+    {
+        p_pcb->cong = (code & PORT_EV_FCS) ? FALSE : TRUE;
+        evt_data.rfc_cong.cong = p_pcb->cong;
+        evt_data.rfc_cong.handle = p_cb->handle;
+        evt_data.rfc_cong.status = BTA_JV_SUCCESS;
+        p_cb->p_cback(BTA_JV_RFCOMM_CONG_EVT, &evt_data, user_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_add_rfc_port
+**
+** Description  add a port for server when the existing posts is open
+**
+** Returns   return a pointer to tBTA_JV_PCB just added
+**
+*******************************************************************************/
+static tBTA_JV_PCB * bta_jv_add_rfc_port(tBTA_JV_RFC_CB *p_cb)
+{
+    UINT8   used = 0, i, listen=0;
+    UINT32  si = 0;
+    tBTA_JV_PCB *p_pcb = NULL;
+    tPORT_STATE port_state;
+    UINT32 event_mask = (PORT_EV_RXCHAR | PORT_EV_FC | PORT_EV_FCS);
+
+    if (p_cb->max_sess > 1)
+    {
+        for (i=0; i<p_cb->max_sess; i++)
+        {
+            if (p_cb->rfc_hdl[i] != 0)
+            {
+                p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[i] - 1];
+                if (p_pcb->state == BTA_JV_ST_SR_LISTEN)
+                    listen++;
+                used++;
+            }
+            else if (si==0)
+            {
+                si = (UINT32)(i + 1);
+            }
+        }
+
+        debug("bta_jv_add_rfc_port max_sess=%d used:%d listen:%d si:%d",
+                    p_cb->max_sess, used, listen, si);
+        if (used <p_cb->max_sess && listen==0 && si)
+        {
+            si--;
+            if (RFCOMM_CreateConnection(p_cb->sec_id, p_cb->scn, TRUE,
+                BTA_JV_DEF_RFC_MTU, (UINT8 *) bd_addr_any, &(p_cb->rfc_hdl[si]), bta_jv_port_mgmt_sr_cback) == PORT_SUCCESS)
+            {
+                p_pcb = &bta_jv_cb.port_cb[p_cb->rfc_hdl[si] - 1];
+                p_pcb->state = BTA_JV_ST_SR_LISTEN;
+                p_pcb->port_handle = p_cb->rfc_hdl[si];
+                PORT_SetEventCallback(p_pcb->port_handle, bta_jv_port_event_sr_cback);
+                PORT_SetDataCOCallback (p_pcb->port_handle, bta_jv_port_data_co_cback);
+                PORT_SetEventMask(p_pcb->port_handle, event_mask);
+                PORT_GetState(p_pcb->port_handle, &port_state);
+
+                port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT);
+
+/* coverity[uninit_use_in_call]
+FALSE-POSITIVE: port_state is initialized at PORT_GetState() */
+                PORT_SetState(p_pcb->port_handle, &port_state);
+                p_pcb->handle = BTA_JV_RFC_H_S_TO_HDL(p_cb->handle, si);
+                APPL_TRACE_DEBUG1( "new rfc handle:0x%x", p_pcb->handle);
+            }
+        }
+    }
+    return p_pcb;
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_start_server
+**
+** Description  waits for an RFCOMM client to connect
+**
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_rfcomm_start_server(tBTA_JV_MSG *p_data)
+{
+    UINT16 handle = 0;
+    UINT32 event_mask = (PORT_EV_RXCHAR | PORT_EV_FC | PORT_EV_FCS);
+    tPORT_STATE port_state;
+    UINT8   sec_id;
+    tBTA_JV_RFC_CB  *p_cb = NULL;
+    tBTA_JV_PCB     *p_pcb;
+    tBTA_JV_API_RFCOMM_SERVER *rs = &(p_data->rfcomm_server);
+    tBTA_JV_RFCOMM_START        evt_data;
+
+    /* TODO DM role manager
+    L2CA_SetDesireRole(rs->role);
+    */
+    evt_data.status = BTA_JV_FAILURE;
+    do
+    {
+        sec_id = bta_jv_alloc_sec_id();
+
+        if (0 == sec_id ||
+            BTM_SetSecurityLevel(FALSE, "JV PORT", sec_id,  rs->sec_mask,
+                BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, rs->local_scn) == FALSE)
+        {
+            break;
+        }
+
+        if (RFCOMM_CreateConnection(sec_id, rs->local_scn, TRUE,
+            BTA_JV_DEF_RFC_MTU, (UINT8 *) bd_addr_any, &handle, bta_jv_port_mgmt_sr_cback) != PORT_SUCCESS)
+        {
+            break;
+        }
+
+        p_cb = bta_jv_alloc_rfc_cb(handle, &p_pcb);
+        if(!p_cb)
+        {
+            APPL_TRACE_ERROR0("run out of rfc control block");
+            break;
+        }
+
+        p_cb->max_sess = rs->max_session;
+        p_cb->p_cback = rs->p_cback;
+        p_cb->sec_id = sec_id;
+        p_cb->scn = rs->local_scn;
+        p_pcb->state = BTA_JV_ST_SR_LISTEN;
+        p_pcb->user_data = rs->user_data;
+        evt_data.status = BTA_JV_SUCCESS;
+        evt_data.handle = p_cb->handle;
+        evt_data.sec_id = sec_id;
+        evt_data.use_co = TRUE; //FALSE;
+
+        PORT_SetEventCallback(handle, bta_jv_port_event_sr_cback);
+        PORT_SetEventMask(handle, event_mask);
+        PORT_GetState(handle, &port_state);
+
+        port_state.fc_type = (PORT_FC_CTS_ON_INPUT | PORT_FC_CTS_ON_OUTPUT);
+
+/* coverity[uninit_use_in_call]
+FALSE-POSITIVE: port_state is initialized at PORT_GetState() */
+        PORT_SetState(handle, &port_state);
+    } while (0);
+
+    rs->p_cback(BTA_JV_RFCOMM_START_EVT, (tBTA_JV *)&evt_data, rs->user_data);
+    if(evt_data.status == BTA_JV_SUCCESS)
+    {
+        PORT_SetDataCOCallback (handle, bta_jv_port_data_co_cback);
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_stop_server
+**
+** Description  stops an RFCOMM server
+**
+** Returns      void
+**
+*******************************************************************************/
+
+void bta_jv_rfcomm_stop_server(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_RFCOMM_CLOSE  evt_data;
+    int i;
+    tBTA_JV_API_RFCOMM_SERVER *ls = &(p_data->rfcomm_server);
+    HDL2CB(ls->rfc_handle);
+    evt_data.status = BTA_JV_FAILURE;
+    if(p_cb && p_pcb)
+    {
+        evt_data.handle = p_cb->handle;
+        void* user_data = p_pcb->user_data;
+        evt_data.status = bta_jv_free_rfc_listen_cb(p_cb);
+        evt_data.async = FALSE;
+
+        /* occasionally when shutting down stack the callback is already
+           freed, hence make sure we check for this condition (pending investigatation
+           of rootcause) */
+        debug("send BTA_JV_RFCOMM_CLOSE_EVT");
+        if( p_cb->p_cback)
+             p_cb->p_cback(BTA_JV_RFCOMM_CLOSE_EVT, (tBTA_JV *)&evt_data, user_data);
+    }
+    else
+    {
+        debug("warning, no jv callback set");
+    }
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_read
+**
+** Description  Read data from an RFCOMM connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_rfcomm_read(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_API_RFCOMM_READ *rc = &(p_data->rfcomm_read);
+    tBTA_JV_RFC_CB  *p_cb = rc->p_cb;
+    tBTA_JV_PCB     *p_pcb = rc->p_pcb;
+    tBTA_JV_RFCOMM_READ    evt_data;
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = p_cb->handle;
+    evt_data.req_id = rc->req_id;
+    evt_data.p_data = rc->p_data;
+    if (PORT_ReadData(rc->p_pcb->port_handle, (char *)rc->p_data, rc->len, &evt_data.len) ==
+        PORT_SUCCESS)
+    {
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+
+    p_cb->p_cback(BTA_JV_RFCOMM_READ_EVT, (tBTA_JV *)&evt_data, p_pcb->user_data);
+}
+
+/*******************************************************************************
+**
+** Function     bta_jv_rfcomm_write
+**
+** Description  write data to an RFCOMM connection
+**
+** Returns      void
+**
+*******************************************************************************/
+void bta_jv_rfcomm_write(tBTA_JV_MSG *p_data)
+{
+    tBTA_JV_API_RFCOMM_WRITE *wc = &(p_data->rfcomm_write);
+    tBTA_JV_RFC_CB  *p_cb = wc->p_cb;
+    tBTA_JV_PCB     *p_pcb = wc->p_pcb;
+    tBTA_JV_RFCOMM_WRITE    evt_data;
+
+    evt_data.status = BTA_JV_FAILURE;
+    evt_data.handle = p_cb->handle;
+    evt_data.req_id = wc->req_id;
+    evt_data.cong   = p_pcb->cong;
+    evt_data.len    = 0;
+    if (!evt_data.cong &&
+        PORT_WriteDataCO(p_pcb->port_handle, &evt_data.len) ==
+        PORT_SUCCESS)
+    {
+        evt_data.status = BTA_JV_SUCCESS;
+    }
+    //update congestion flag
+    evt_data.cong   = p_pcb->cong;
+    if (p_cb->p_cback)
+    {
+        p_cb->p_cback(BTA_JV_RFCOMM_WRITE_EVT, (tBTA_JV *)&evt_data, p_pcb->user_data);
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("bta_jv_rfcomm_write :: WARNING ! No JV callback set");
+    }
+}
+
diff --git a/bta/jv/bta_jv_api.c b/bta/jv/bta_jv_api.c
new file mode 100644
index 0000000..8953886
--- /dev/null
+++ b/bta/jv/bta_jv_api.c
@@ -0,0 +1,1584 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the JAVA API for Bluetooth Wireless
+ *  Technology (JABWT) as specified by the JSR82 specificiation
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bd.h"
+#include "bta_sys.h"
+#include "bta_jv_api.h"
+#include "bta_jv_int.h"
+#include "gki.h"
+#include <string.h>
+#include "port_api.h"
+#include "sdp_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+static const tBTA_SYS_REG bta_jv_reg =
+{
+    bta_jv_sm_execute,
+    NULL
+};
+
+/*******************************************************************************
+**
+** Function         BTA_JvEnable
+**
+** Description      Enable the Java I/F service. When the enable
+**                  operation is complete the callback function will be
+**                  called with a BTA_JV_ENABLE_EVT. This function must
+**                  be called before other function in the JV API are
+**                  called.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvEnable(tBTA_JV_DM_CBACK *p_cback)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_ENABLE  *p_buf;
+
+    APPL_TRACE_API0( "BTA_JvEnable");
+    if(p_cback && FALSE == bta_sys_is_register(BTA_ID_JV))
+    {
+        memset(&bta_jv_cb, 0, sizeof(tBTA_JV_CB));
+
+        /* register with BTA system manager */
+        GKI_sched_lock();
+        bta_sys_register(BTA_ID_JV, &bta_jv_reg);
+        GKI_sched_unlock();
+
+        if (p_cback && (p_buf = (tBTA_JV_API_ENABLE *) GKI_getbuf(sizeof(tBTA_JV_API_ENABLE))) != NULL)
+        {
+            p_buf->hdr.event = BTA_JV_API_ENABLE_EVT;
+            p_buf->p_cback = p_cback;
+            bta_sys_sendmsg(p_buf);
+            status = BTA_JV_SUCCESS;
+        }
+    }
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvDisable
+**
+** Description      Disable the Java I/F
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_JvDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    APPL_TRACE_API0( "BTA_JvDisable");
+    bta_sys_deregister(BTA_ID_JV);
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_JV_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsEnable
+**
+** Description      Get the JV registration status.
+**
+** Returns          TRUE, if registered
+**
+*******************************************************************************/
+BOOLEAN BTA_JvIsEnable(void)
+{
+    return bta_sys_is_register(BTA_ID_JV);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetDiscoverability
+**
+** Description      This function sets the Bluetooth  discoverable modes
+**                  of the local device.  This controls whether other
+**                  Bluetooth devices can find the local device.
+**
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_SET_DISCOVER_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvSetDiscoverability(tBTA_JV_DISC disc_mode)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_SET_DISCOVERABILITY *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvSetDiscoverability");
+    if ((p_msg = (tBTA_JV_API_SET_DISCOVERABILITY *)GKI_getbuf(sizeof(tBTA_JV_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_SET_DISCOVERABILITY_EVT;
+        p_msg->disc_mode = disc_mode;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetDiscoverability
+**
+** Description      This function gets the Bluetooth
+**                  discoverable modes of local device
+**
+** Returns          The current Bluetooth discoverable mode.
+**
+*******************************************************************************/
+tBTA_JV_DISC BTA_JvGetDiscoverability(void)
+{
+    APPL_TRACE_API0( "BTA_JvGetDiscoverability");
+    return BTM_ReadDiscoverability(0, 0);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetLocalDeviceAddr
+**
+** Description      This function obtains the local Bluetooth device address.
+**                  The local Bluetooth device address is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_ADDR_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvGetLocalDeviceAddr(void)
+{
+    tBTA_JV_STATUS ret = BTA_JV_FAILURE;
+    BT_HDR *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvGetLocalDeviceAddr");
+    if ((p_msg = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_JV_API_GET_LOCAL_DEVICE_ADDR_EVT;
+        bta_sys_sendmsg(p_msg);
+        ret = BTA_JV_SUCCESS;
+    }
+
+    return(ret);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetLocalDeviceName
+**
+** Description      This function obtains the name of the local device
+**                  The local Bluetooth device name is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_LOCAL_NAME_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvGetLocalDeviceName(void)
+{
+    tBTA_JV_STATUS ret = BTA_JV_FAILURE;
+    BT_HDR *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvGetLocalDeviceName");
+    if ((p_msg = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_JV_API_GET_LOCAL_DEVICE_NAME_EVT;
+        bta_sys_sendmsg(p_msg);
+        ret = BTA_JV_SUCCESS;
+    }
+
+    return(ret);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetRemoteDeviceName
+**
+** Description      This function obtains the name of the specified device.
+**                  The Bluetooth device name is reported by the
+**                  tBTA_JV_DM_CBACK callback with a BTA_JV_REMOTE_NAME_EVT.
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvGetRemoteDeviceName(BD_ADDR bd_addr)
+{
+    tBTA_JV_STATUS ret = BTA_JV_FAILURE;
+    tBTA_JV_API_GET_REMOTE_NAME *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvGetRemoteDeviceName");
+    if ((p_msg = (tBTA_JV_API_GET_REMOTE_NAME *)GKI_getbuf(sizeof(tBTA_JV_API_GET_REMOTE_NAME))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_GET_REMOTE_DEVICE_NAME_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+        ret = BTA_JV_SUCCESS;
+    }
+
+    return(ret);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetPreknownDevice
+**
+** Description      This function obtains the Bluetooth address in the inquiry
+**                  database collected via the previous call to BTA_DmSearch().
+**
+** Returns          The number of preknown devices if p_bd_addr is NULL
+**                  BTA_JV_SUCCESS if successful.
+**                  BTA_JV_INTERNAL_ERR(-1) if internal failure.
+**
+*******************************************************************************/
+INT32 BTA_JvGetPreknownDevice(UINT8 * p_bd_addr, UINT32 index)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTM_INQ_INFO *p_info;
+    UINT32  count = 0;
+    INT32   ret = BTA_JV_INTERNAL_ERR;
+
+    APPL_TRACE_API0( "BTA_JvGetPreknownDevice");
+    p_info = BTM_InqFirstResult();
+    if(p_info)
+    {
+        status = BTA_JV_SUCCESS;
+        /* the database is valid */
+        if(NULL == p_bd_addr)
+        {
+            /* p_bd_addr is NULL: count the number of preknown devices */
+            /* set the index to an invalid size (too big) */
+            index = BTM_INQ_DB_SIZE;
+        }
+        else if(index >= BTM_INQ_DB_SIZE)
+        {
+            /* invalid index - error */
+            status = (tBTA_JV_STATUS)BTA_JV_INTERNAL_ERR;
+        }
+
+        if(BTA_JV_SUCCESS == status)
+        {
+            while(p_info && index > count)
+            {
+                count++;
+                p_info = BTM_InqNextResult(p_info);
+            }
+
+            if(p_bd_addr)
+            {
+                if(index == count && p_info)
+                {
+                    count = BTA_JV_SUCCESS;
+                    bdcpy(p_bd_addr, p_info->results.remote_bd_addr);
+                }
+                else
+                    status = (tBTA_JV_STATUS)BTA_JV_INTERNAL_ERR;
+            }
+            /*
+            else report the count
+            */
+        }
+        /*
+        else error had happened.
+        */
+    }
+
+    if(BTA_JV_SUCCESS == status)
+    {
+        ret = count;
+    }
+    return ret;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetDeviceClass
+**
+** Description      This function obtains the local Class of Device. This
+**                  function executes in place. The result is returned right away.
+**
+** Returns          DEV_CLASS, A three-byte array of UINT8 that contains the
+**                  Class of Device information. The definitions are in the
+**                  "Bluetooth Assigned Numbers".
+**
+*******************************************************************************/
+UINT8 * BTA_JvGetDeviceClass(void)
+{
+    APPL_TRACE_API0( "BTA_JvGetDeviceClass");
+    return BTM_ReadDeviceClass();
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetServiceClass
+**
+** Description      This function sets the service class of local Class of Device
+**
+** Returns          BTA_JV_SUCCESS if successful.
+**                  BTA_JV_FAIL if internal failure.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvSetServiceClass(UINT32 service)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_SET_SERVICE_CLASS *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvSetServiceClass");
+    if ((p_msg = (tBTA_JV_API_SET_SERVICE_CLASS *)GKI_getbuf(sizeof(tBTA_JV_API_SET_SERVICE_CLASS))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_SET_SERVICE_CLASS_EVT;
+        p_msg->service = service;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvSetEncryption
+**
+** Description      This function ensures that the connection to the given device
+**                  is encrypted.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_SET_ENCRYPTION_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvSetEncryption(BD_ADDR bd_addr)
+{
+    tBTA_JV_STATUS ret = BTA_JV_FAILURE;
+    tBTA_JV_API_SET_ENCRYPTION *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvSetEncryption");
+    if ((p_msg = (tBTA_JV_API_SET_ENCRYPTION *)GKI_getbuf(sizeof(tBTA_JV_API_SET_ENCRYPTION))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_SET_ENCRYPTION_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_msg);
+        ret = BTA_JV_SUCCESS;
+    }
+
+    return(ret);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsAuthenticated
+**
+** Description      This function checks if the peer device is authenticated
+**
+** Returns          TRUE if authenticated.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN BTA_JvIsAuthenticated(BD_ADDR bd_addr)
+{
+    BOOLEAN is_authenticated = FALSE;
+    UINT8 sec_flags;
+
+    if(BTM_GetSecurityFlags(bd_addr, &sec_flags))
+    {
+        if(sec_flags&BTM_SEC_FLAG_AUTHENTICATED)
+            is_authenticated = TRUE;
+    }
+    return is_authenticated;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsTrusted
+**
+** Description      This function checks if the peer device is trusted
+**                  (previously paired)
+**
+** Returns          TRUE if trusted.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN BTA_JvIsTrusted(BD_ADDR bd_addr)
+{
+    BOOLEAN is_trusted = FALSE;
+    UINT8 sec_flags;
+
+    if(BTM_GetSecurityFlags(bd_addr, &sec_flags))
+    {
+        if ((sec_flags&BTM_SEC_FLAG_AUTHENTICATED) ||
+            (sec_flags&BTM_SEC_FLAG_LKEY_KNOWN))
+        {
+            is_trusted = TRUE;
+        }
+    }
+    return is_trusted;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsAuthorized
+**
+** Description      This function checks if the peer device is authorized
+**
+** Returns          TRUE if authorized.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN BTA_JvIsAuthorized(BD_ADDR bd_addr)
+{
+    BOOLEAN is_authorized = FALSE;
+    UINT8 sec_flags;
+
+    if(BTM_GetSecurityFlags(bd_addr, &sec_flags))
+    {
+        if(sec_flags&BTM_SEC_FLAG_AUTHORIZED)
+            is_authorized = TRUE;
+    }
+    return is_authorized;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvIsEncrypted
+**
+** Description      This function checks if the link to peer device is encrypted
+**
+** Returns          TRUE if encrypted.
+**                  FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN BTA_JvIsEncrypted(BD_ADDR bd_addr)
+{
+    BOOLEAN is_encrypted = FALSE;
+    UINT8 sec_flags;
+
+    if(BTM_GetSecurityFlags(bd_addr, &sec_flags))
+    {
+        if(sec_flags&BTM_SEC_FLAG_ENCRYPTED)
+            is_encrypted = TRUE;
+    }
+    return is_encrypted;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetSecurityMode
+**
+** Description      This function returns the current Bluetooth security mode
+**                  of the local device
+**
+** Returns          The current Bluetooth security mode.
+**
+*******************************************************************************/
+tBTA_JV_SEC_MODE BTA_JvGetSecurityMode(void)
+{
+   return BTM_GetSecurityMode();
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetSCN
+**
+** Description      This function reserves a SCN (server channel number) for
+**                  applications running over RFCOMM. It is primarily called by
+**                  server profiles/applications to register their SCN into the
+**                  SDP database. The SCN is reported by the tBTA_JV_DM_CBACK
+**                  callback with a BTA_JV_GET_SCN_EVT.
+**                  If the SCN reported is 0, that means all SCN resources are
+**                  exhausted.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvGetSCN(void)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    BT_HDR *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvGetSCN");
+    if ((p_msg = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_msg->event = BTA_JV_API_GET_SCN_EVT;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvFreeSCN
+**
+** Description      This function frees a server channel number that was used
+**                  by an application running over RFCOMM.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvFreeSCN(UINT8 scn)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_FREE_SCN *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvFreeSCN");
+    if ((p_msg = (tBTA_JV_API_FREE_SCN *)GKI_getbuf(sizeof(tBTA_JV_API_FREE_SCN))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_FREE_SCN_EVT;
+        p_msg->scn       = scn;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetPSM
+**
+** Description      This function reserves a PSM (Protocol Service Multiplexer)
+**                  applications running over L2CAP. It is primarily called by
+**                  server profiles/applications to register their PSM into the
+**                  SDP database.
+**
+** Returns          The next free PSM
+**
+*******************************************************************************/
+UINT16 BTA_JvGetPSM(void)
+{
+#if 0
+    APPL_TRACE_API0( "BTA_JvGetPSM");
+
+    return (L2CA_AllocatePSM());
+#endif
+    return 0;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvStartDiscovery
+**
+** Description      This function performs service discovery for the services
+**                  provided by the given peer device. When the operation is
+**                  complete the tBTA_JV_DM_CBACK callback function will be
+**                  called with a BTA_JV_DISCOVERY_COMP_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvStartDiscovery(BD_ADDR bd_addr, UINT16 num_uuid,
+            tSDP_UUID *p_uuid_list, void * user_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_START_DISCOVERY *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvStartDiscovery");
+    if ((p_msg = (tBTA_JV_API_START_DISCOVERY *)GKI_getbuf(sizeof(tBTA_JV_API_START_DISCOVERY))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_START_DISCOVERY_EVT;
+        bdcpy(p_msg->bd_addr, bd_addr);
+        p_msg->num_uuid = num_uuid;
+        memcpy(p_msg->uuid_list, p_uuid_list, num_uuid * sizeof(tSDP_UUID));
+        p_msg->num_attr = 0;
+        p_msg->user_data = user_data;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvCancelDiscovery
+**
+** Description      This function cancels an active service discovery.
+**                  When the operation is
+**                  complete the tBTA_JV_DM_CBACK callback function will be
+**                  called with a BTA_JV_CANCEL_DISCVRY_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvCancelDiscovery(void * user_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_CANCEL_DISCOVERY *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvCancelDiscovery");
+    if ((p_msg = (tBTA_JV_API_CANCEL_DISCOVERY *)GKI_getbuf(sizeof(tBTA_JV_API_CANCEL_DISCOVERY))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_CANCEL_DISCOVERY_EVT;
+        p_msg->user_data = user_data;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvGetServicesLength
+**
+** Description      This function obtains the number of services and the length
+**                  of each service found in the SDP database (result of last
+**                  BTA_JvStartDiscovery().When the operation is complete the
+**                  tBTA_JV_DM_CBACK callback function will be called with a
+**                  BTA_JV_SERVICES_LEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvGetServicesLength(BOOLEAN inc_hdr, UINT16 *p_services_len)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_GET_SERVICES_LENGTH *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvGetServicesLength");
+    if ((p_msg = (tBTA_JV_API_GET_SERVICES_LENGTH *)GKI_getbuf(sizeof(tBTA_JV_API_GET_SERVICES_LENGTH))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_GET_SERVICES_LENGTH_EVT;
+        p_msg->p_services_len = p_services_len;
+        p_msg->inc_hdr = inc_hdr;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+/*******************************************************************************
+**
+** Function         BTA_JvGetServicesResult
+**
+** Description      This function returns a number of service records found
+**                  during current service search, equals to the number returned
+**                  by previous call to BTA_JvGetServicesLength.
+**                  The contents of each SDP record will be returned under a
+**                  TLV (type, len, value) representation in the data buffer
+**                  provided by the caller.
+**
+** Returns          -1, if error. Otherwise, the number of services
+**
+*******************************************************************************/
+INT32 BTA_JvGetServicesResult(BOOLEAN inc_hdr, UINT8 **TLVs)
+{
+#if 0
+    INT32 num_services = -1;
+    UINT8   *p, *np, *op, type;
+    UINT32  raw_used, raw_cur;
+    UINT32  len;
+    UINT32  hdr_len;
+
+    APPL_TRACE_API0( "BTA_JvGetServicesResult");
+    if(p_bta_jv_cfg->p_sdp_db->p_first_rec)
+    {
+        /* the database is valid */
+        num_services = 0;
+        p = p_bta_jv_cfg->p_sdp_db->raw_data;
+        raw_used = p_bta_jv_cfg->p_sdp_db->raw_used;
+        while(raw_used && p)
+        {
+            op = p;
+            type = *p++;
+            np = sdpu_get_len_from_type(p, type, &len);
+            p = np + len;
+            raw_cur = p - op;
+            if(raw_used >= raw_cur)
+            {
+                raw_used -= raw_cur;
+            }
+            else
+            {
+                /* error. can not continue */
+                break;
+            }
+            if(inc_hdr)
+            {
+                hdr_len = np - op;
+                memcpy(TLVs[num_services++], op, len+hdr_len);
+            }
+            else
+            {
+                memcpy(TLVs[num_services++], np, len);
+            }
+        } /* end of while */
+    }
+    return(num_services);
+#endif
+    return 0;
+}
+/*******************************************************************************
+**
+** Function         BTA_JvServiceSelect
+**
+** Description      This function checks if the SDP database contains the given
+**                  service UUID. When the operation is complete the
+**                  tBTA_JV_DM_CBACK callback function will be called with a
+**                  BTA_JV_SERVICE_SEL_EVT with the length of the service record.
+**                  If the service is not found or error, -1 is reported.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvServiceSelect(UINT16 uuid)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_SERVICE_SELECT *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvServiceSelect");
+    if ((p_msg = (tBTA_JV_API_SERVICE_SELECT *)GKI_getbuf(sizeof(tBTA_JV_API_SERVICE_SELECT))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_SERVICE_SELECT_EVT;
+        p_msg->uuid = uuid;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvServiceResult
+**
+** Description      This function returns the contents of the SDP record from
+**                  last BTA_JvServiceSelect. The contents will be returned under
+**                  a TLV (type, len, value) representation in the data buffer
+**                  provided by the caller.
+**
+** Returns          -1, if error. Otherwise, the length of service record.
+**
+*******************************************************************************/
+INT32 BTA_JvServiceResult(UINT8 *TLV)
+{
+    INT32   serv_sel = -1;
+
+    APPL_TRACE_API0( "BTA_JvServiceResult");
+    if(bta_jv_cb.p_sel_raw_data)
+    {
+        serv_sel = bta_jv_cb.sel_len;
+        memcpy(TLV, bta_jv_cb.p_sel_raw_data, serv_sel);
+    }
+
+    return serv_sel;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvCreateRecord
+**
+** Description      Create a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_CREATE_RECORD_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvCreateRecordByUser(void *user_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_CREATE_RECORD *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvCreateRecordByUser");
+    if ((p_msg = (tBTA_JV_API_CREATE_RECORD *)GKI_getbuf(sizeof(tBTA_JV_API_CREATE_RECORD))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_CREATE_RECORD_EVT;
+        p_msg->user_data = user_data;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvUpdateRecord
+**
+** Description      Update a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_UPDATE_RECORD_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvUpdateRecord(UINT32 handle, UINT16 *p_ids,
+    UINT8 **p_values, INT32 *p_value_sizes, INT32 array_len)
+{
+#if 0
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_UPDATE_RECORD *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvUpdateRecord");
+    if ((p_msg = (tBTA_JV_API_UPDATE_RECORD *)GKI_getbuf(sizeof(tBTA_JV_API_UPDATE_RECORD))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_UPDATE_RECORD_EVT;
+        p_msg->handle = handle;
+        p_msg->p_ids = p_ids;
+        p_msg->p_values = p_values;
+        p_msg->p_value_sizes = p_value_sizes;
+        p_msg->array_len = array_len;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+    return(status);
+#endif
+    return -1;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvAddAttribute
+**
+** Description      Add an attribute to a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_ADD_ATTR_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvAddAttribute(UINT32 handle, UINT16 attr_id,
+    UINT8 *p_value, INT32 value_size)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_ADD_ATTRIBUTE *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvAddAttribute");
+    if ((p_msg = (tBTA_JV_API_ADD_ATTRIBUTE *)GKI_getbuf(sizeof(tBTA_JV_API_ADD_ATTRIBUTE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_ADD_ATTRIBUTE_EVT;
+        p_msg->handle = handle;
+        p_msg->attr_id = attr_id;
+        p_msg->p_value = p_value;
+        p_msg->value_size = value_size;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvDeleteAttribute
+**
+** Description      Delete an attribute from a service record in the local SDP database.
+**                  When the operation is complete the tBTA_JV_DM_CBACK callback
+**                  function will be called with a BTA_JV_DELETE_ATTR_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvDeleteAttribute(UINT32 handle, UINT16 attr_id)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_ADD_ATTRIBUTE *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvDeleteAttribute");
+    if ((p_msg = (tBTA_JV_API_ADD_ATTRIBUTE *)GKI_getbuf(sizeof(tBTA_JV_API_ADD_ATTRIBUTE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_DELETE_ATTRIBUTE_EVT;
+        p_msg->handle = handle;
+        p_msg->attr_id = attr_id;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvDeleteRecord
+**
+** Description      Delete a service record in the local SDP database.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvDeleteRecord(UINT32 handle)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_ADD_ATTRIBUTE *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvDeleteRecord");
+    if ((p_msg = (tBTA_JV_API_ADD_ATTRIBUTE *)GKI_getbuf(sizeof(tBTA_JV_API_ADD_ATTRIBUTE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_DELETE_RECORD_EVT;
+        p_msg->handle = handle;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvReadRecord
+**
+** Description      Read a service record in the local SDP database.
+**
+** Returns          -1, if the record is not found.
+**                  Otherwise, the offset (0 or 1) to start of data in p_data.
+**
+**                  The size of data copied into p_data is in *p_data_len.
+**
+*******************************************************************************/
+INT32 BTA_JvReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len)
+{
+    UINT32 sdp_handle;
+
+    sdp_handle = bta_jv_get_sdp_handle(handle);
+
+    if(sdp_handle)
+    {
+        return SDP_ReadRecord(sdp_handle, p_data, p_data_len);
+    }
+
+    return -1;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capConnect
+**
+** Description      Initiate a connection as a L2CAP client to the given BD
+**                  Address.
+**                  When the connection is initiated or failed to initiate,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_CL_INIT_EVT
+**                  When the connection is established or failed,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capConnect(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role, UINT16 remote_psm, UINT16 rx_mtu,
+                           BD_ADDR peer_bd_addr, tBTA_JV_L2CAP_CBACK *p_cback)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_L2CAP_CONNECT *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvL2capConnect");
+    if (p_cback &&
+        (p_msg = (tBTA_JV_API_L2CAP_CONNECT *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_CONNECT))) != NULL)
+    {
+        p_msg->hdr.event    = BTA_JV_API_L2CAP_CONNECT_EVT;
+        p_msg->sec_mask     = sec_mask;
+        p_msg->role         = role;
+        p_msg->remote_psm   = remote_psm;
+        p_msg->rx_mtu       = rx_mtu;
+        memcpy(p_msg->peer_bd_addr, peer_bd_addr, sizeof(BD_ADDR));
+        p_msg->p_cback      = p_cback;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capClose
+**
+** Description      This function closes an L2CAP client connection
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capClose(UINT32 handle)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_L2CAP_CLOSE *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvL2capClose");
+    if (handle < BTA_JV_MAX_L2C_CONN && bta_jv_cb.l2c_cb[handle].p_cback &&
+        (p_msg = (tBTA_JV_API_L2CAP_CLOSE *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_CLOSE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_L2CAP_CLOSE_EVT;
+        p_msg->handle = handle;
+        p_msg->p_cb = &bta_jv_cb.l2c_cb[handle];
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capStartServer
+**
+** Description      This function starts an L2CAP server and listens for an L2CAP
+**                  connection from a remote Bluetooth device.  When the server
+**                  is started successfully, tBTA_JV_L2CAP_CBACK is called with
+**                  BTA_JV_L2CAP_START_EVT.  When the connection is established,
+**                  tBTA_JV_L2CAP_CBACK is called with BTA_JV_L2CAP_OPEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capStartServer(tBTA_SEC sec_mask, tBTA_JV_ROLE role,
+                           UINT16 local_psm, UINT16 rx_mtu,
+                           tBTA_JV_L2CAP_CBACK *p_cback)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_L2CAP_SERVER *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvL2capStartServer");
+    if (p_cback &&
+        (p_msg = (tBTA_JV_API_L2CAP_SERVER *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_SERVER))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_L2CAP_START_SERVER_EVT;
+        p_msg->sec_mask = sec_mask;
+        p_msg->role = role;
+        p_msg->local_psm = local_psm;
+        p_msg->rx_mtu = rx_mtu;
+        p_msg->p_cback = p_cback;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capStopServer
+**
+** Description      This function stops the L2CAP server. If the server has an
+**                  active connection, it would be closed.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capStopServer(UINT16 local_psm)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_L2CAP_SERVER *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvL2capStopServer");
+    if ((p_msg = (tBTA_JV_API_L2CAP_SERVER *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_SERVER))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_L2CAP_STOP_SERVER_EVT;
+        p_msg->local_psm = local_psm;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capRead
+**
+** Description      This function reads data from an L2CAP connecti;
+    tBTA_JV_RFC_CB  *p_cb = rc->p_cb;
+on
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_READ_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capRead(UINT32 handle, UINT32 req_id, UINT8 *p_data, UINT16 len)
+{
+#if 0
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+#if SDP_FOR_JV_INCLUDED == TRUE
+    tBTA_JV_API_L2CAP_READ *p_msg;
+#endif
+    tBTA_JV_L2CAP_READ evt_data;
+
+    APPL_TRACE_API0( "BTA_JvL2capRead");
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+    if(BTA_JV_L2C_FOR_SDP_HDL == handle)
+    {
+        if (bta_jv_cb.l2c_cb[handle].p_cback &&
+            (p_msg = (tBTA_JV_API_L2CAP_READ *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_READ))) != NULL)
+        {
+            p_msg->hdr.event = BTA_JV_API_L2CAP_READ_EVT;
+            p_msg->handle = handle;
+            p_msg->req_id = req_id;
+            p_msg->p_data = p_data;
+            p_msg->len = len;
+            p_msg->p_cback = bta_jv_cb.l2c_cb[handle].p_cback;
+            bta_sys_sendmsg(p_msg);
+            status = BTA_JV_SUCCESS;
+        }
+    }
+    else
+#endif
+    if (handle < BTA_JV_MAX_L2C_CONN && bta_jv_cb.l2c_cb[handle].p_cback)
+    {
+        status = BTA_JV_SUCCESS;
+        evt_data.status = BTA_JV_FAILURE;
+        evt_data.handle = handle;
+        evt_data.req_id = req_id;
+        evt_data.p_data = p_data;
+        evt_data.len    = 0;
+
+        if (BT_PASS == GAP_ConnReadData((UINT16)handle, p_data, len, &evt_data.len))
+        {
+            evt_data.status = BTA_JV_SUCCESS;
+        }
+        bta_jv_cb.l2c_cb[handle].p_cback(BTA_JV_L2CAP_READ_EVT, (tBTA_JV *)&evt_data);
+    }
+
+    return(status);
+#endif
+    return -1;
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capReceive
+**
+** Description      This function reads data from an L2CAP connection
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_RECEIVE_EVT.
+**                  If there are more data queued in L2CAP than len, the extra data will be discarded.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capReceive(UINT32 handle, UINT32 req_id, UINT8 *p_data, UINT16 len)
+{
+#if 0
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_L2CAP_RECEIVE evt_data;
+    UINT32  left_over = 0;
+    UINT16  max_len, read_len;
+
+    APPL_TRACE_API0( "BTA_JvL2capReceive");
+
+    if (handle < BTA_JV_MAX_L2C_CONN && bta_jv_cb.l2c_cb[handle].p_cback)
+    {
+        status = BTA_JV_SUCCESS;
+        evt_data.status = BTA_JV_FAILURE;
+        evt_data.handle = handle;
+        evt_data.req_id = req_id;
+        evt_data.p_data = p_data;
+        evt_data.len    = 0;
+
+        if (BT_PASS == GAP_ConnReadData((UINT16)handle, p_data, len, &evt_data.len))
+        {
+            evt_data.status = BTA_JV_SUCCESS;
+            GAP_GetRxQueueCnt ((UINT16)handle, &left_over);
+            while (left_over)
+            {
+                max_len = (left_over > 0xFFFF)?0xFFFF:left_over;
+                GAP_ConnReadData ((UINT16)handle, NULL, max_len, &read_len);
+                left_over -= read_len;
+            }
+        }
+        bta_jv_cb.l2c_cb[handle].p_cback(BTA_JV_L2CAP_RECEIVE_EVT, (tBTA_JV *)&evt_data);
+    }
+
+    return(status);
+#endif
+    return -1;
+}
+/*******************************************************************************
+**
+** Function         BTA_JvL2capReady
+**
+** Description      This function determined if there is data to read from
+**                    an L2CAP connection
+**
+** Returns          BTA_JV_SUCCESS, if data queue size is in *p_data_size.
+**                  BTA_JV_FAILURE, if error.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capReady(UINT32 handle, UINT32 *p_data_size)
+{
+#if 0
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+
+    APPL_TRACE_API1( "BTA_JvL2capReady: %d", handle);
+    if (p_data_size && handle < BTA_JV_MAX_L2C_CONN && bta_jv_cb.l2c_cb[handle].p_cback)
+    {
+        *p_data_size = 0;
+#if SDP_FOR_JV_INCLUDED == TRUE
+        if(BTA_JV_L2C_FOR_SDP_HDL == handle)
+        {
+            *p_data_size = bta_jv_cb.sdp_data_size;
+            status = BTA_JV_SUCCESS;
+        }
+        else
+#endif
+        if(BT_PASS == GAP_GetRxQueueCnt((UINT16)handle, p_data_size) )
+        {
+            status = BTA_JV_SUCCESS;
+        }
+    }
+
+    return(status);
+#endif
+    return -1;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvL2capWrite
+**
+** Description      This function writes data to an L2CAP connection
+**                  When the operation is complete, tBTA_JV_L2CAP_CBACK is
+**                  called with BTA_JV_L2CAP_WRITE_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvL2capWrite(UINT32 handle, UINT32 req_id, UINT8 *p_data, UINT16 len)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_L2CAP_WRITE *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvL2capWrite");
+    if (handle < BTA_JV_MAX_L2C_CONN && bta_jv_cb.l2c_cb[handle].p_cback &&
+        (p_msg = (tBTA_JV_API_L2CAP_WRITE *)GKI_getbuf(sizeof(tBTA_JV_API_L2CAP_WRITE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_L2CAP_WRITE_EVT;
+        p_msg->handle = handle;
+        p_msg->req_id = req_id;
+        p_msg->p_data = p_data;
+        p_msg->p_cb = &bta_jv_cb.l2c_cb[handle];
+        p_msg->len = len;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommConnect
+**
+** Description      This function makes an RFCOMM conection to a remote BD
+**                  Address.
+**                  When the connection is initiated or failed to initiate,
+**                  tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_CL_INIT_EVT
+**                  When the connection is established or failed,
+**                  tBTA_JV_RFCOMM_CBACK is called with BTA_JV_RFCOMM_OPEN_EVT
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommConnect(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role, UINT8 remote_scn, BD_ADDR peer_bd_addr,
+                           tBTA_JV_RFCOMM_CBACK *p_cback, void* user_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_CONNECT *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvRfcommConnect");
+    if (p_cback &&
+        (p_msg = (tBTA_JV_API_RFCOMM_CONNECT *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_CONNECT))) != NULL)
+    {
+        p_msg->hdr.event    = BTA_JV_API_RFCOMM_CONNECT_EVT;
+        p_msg->sec_mask     = sec_mask;
+        p_msg->role         = role;
+        p_msg->remote_scn   = remote_scn;
+        memcpy(p_msg->peer_bd_addr, peer_bd_addr, sizeof(BD_ADDR));
+        p_msg->p_cback      = p_cback;
+        p_msg->user_data    = user_data;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommClose
+**
+** Description      This function closes an RFCOMM connection
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommClose(UINT32 handle)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_CLOSE *p_msg;
+    UINT32  hi = (handle & BTA_JV_RFC_HDL_MASK) - 1;
+    UINT32  si = BTA_JV_RFC_HDL_TO_SIDX(handle);
+
+    APPL_TRACE_API0( "BTA_JvRfcommClose");
+    if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback &&
+        si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si] &&
+        (p_msg = (tBTA_JV_API_RFCOMM_CLOSE *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_CLOSE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_RFCOMM_CLOSE_EVT;
+        p_msg->handle = handle;
+        p_msg->p_cb = &bta_jv_cb.rfc_cb[hi];
+        p_msg->p_pcb = &bta_jv_cb.port_cb[p_msg->p_cb->rfc_hdl[si] - 1];
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommStartServer
+**
+** Description      This function starts listening for an RFCOMM connection
+**                  request from a remote Bluetooth device.  When the server is
+**                  started successfully, tBTA_JV_RFCOMM_CBACK is called
+**                  with BTA_JV_RFCOMM_START_EVT.
+**                  When the connection is established, tBTA_JV_RFCOMM_CBACK
+**                  is called with BTA_JV_RFCOMM_OPEN_EVT.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommStartServer(tBTA_SEC sec_mask,
+                           tBTA_JV_ROLE role, UINT8 local_scn, UINT8 max_session,
+                           tBTA_JV_RFCOMM_CBACK *p_cback, void* user_data)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_SERVER *p_msg;
+
+    APPL_TRACE_API0( "BTA_JvRfcommStartServer");
+    if (p_cback &&
+        (p_msg = (tBTA_JV_API_RFCOMM_SERVER *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_SERVER))) != NULL)
+    {
+        if (max_session == 0)
+            max_session = 1;
+        if (max_session > BTA_JV_MAX_RFC_SR_SESSION)
+        {
+            APPL_TRACE_DEBUG2( "max_session is too big. use max (%d)", max_session, BTA_JV_MAX_RFC_SR_SESSION);
+            max_session = BTA_JV_MAX_RFC_SR_SESSION;
+        }
+        p_msg->hdr.event = BTA_JV_API_RFCOMM_START_SERVER_EVT;
+        p_msg->sec_mask = sec_mask;
+        p_msg->role = role;
+        p_msg->local_scn = local_scn;
+        p_msg->max_session = max_session;
+        p_msg->p_cback = p_cback;
+        p_msg->user_data = user_data; //caller's private data
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommStopServer
+**
+** Description      This function stops the RFCOMM server. If the server has an
+**                  active connection, it would be closed.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommStopServer(UINT32 handle)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_SERVER *p_msg;
+    APPL_TRACE_API0( "BTA_JvRfcommStopServer");
+    if ((p_msg = (tBTA_JV_API_RFCOMM_SERVER *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_SERVER))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_RFCOMM_STOP_SERVER_EVT;
+        p_msg->rfc_handle = handle;
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommRead
+**
+** Description      This function reads data from an RFCOMM connection
+**                  The actual size of data read is returned in p_len.
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommRead(UINT32 handle, UINT32 req_id, UINT8 *p_data, UINT16 len)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_READ *p_msg;
+    UINT32  hi = (handle & BTA_JV_RFC_HDL_MASK) - 1;
+    UINT32  si = BTA_JV_RFC_HDL_TO_SIDX(handle);
+
+    APPL_TRACE_API0( "BTA_JvRfcommRead");
+    if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback &&
+        si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si] &&
+        (p_msg = (tBTA_JV_API_RFCOMM_READ *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_READ))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_RFCOMM_READ_EVT;
+        p_msg->handle = handle;
+        p_msg->req_id = req_id;
+        p_msg->p_data = p_data;
+        p_msg->len = len;
+        p_msg->p_cb = &bta_jv_cb.rfc_cb[hi];
+        p_msg->p_pcb = &bta_jv_cb.port_cb[p_msg->p_cb->rfc_hdl[si] - 1];
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommGetPortHdl
+**
+** Description    This function fetches the rfcomm port handle
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+UINT16 BTA_JvRfcommGetPortHdl(UINT32 handle)
+{
+    UINT32  hi = (handle & BTA_JV_RFC_HDL_MASK) - 1;
+    UINT32  si = BTA_JV_RFC_HDL_TO_SIDX(handle);
+
+    if (hi < BTA_JV_MAX_RFC_CONN &&
+        si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si])
+        return bta_jv_cb.port_cb[bta_jv_cb.rfc_cb[hi].rfc_hdl[si] - 1].port_handle;
+    else
+        return 0xffff;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommReady
+**
+** Description      This function determined if there is data to read from
+**                  an RFCOMM connection
+**
+** Returns          BTA_JV_SUCCESS, if data queue size is in *p_data_size.
+**                  BTA_JV_FAILURE, if error.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommReady(UINT32 handle, UINT32 *p_data_size)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    UINT16          size = 0;
+    UINT32  hi = (handle & BTA_JV_RFC_HDL_MASK) - 1;
+    UINT32  si = BTA_JV_RFC_HDL_TO_SIDX(handle);
+
+    APPL_TRACE_API0( "BTA_JvRfcommReady");
+    if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback &&
+        si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si])
+    {
+        if(PORT_GetRxQueueCnt(bta_jv_cb.rfc_cb[hi].rfc_hdl[si], &size) == PORT_SUCCESS)
+        {
+            status = BTA_JV_SUCCESS;
+        }
+    }
+    *p_data_size = size;
+    return(status);
+}
+
+/*******************************************************************************
+**
+** Function         BTA_JvRfcommWrite
+**
+** Description      This function writes data to an RFCOMM connection
+**
+** Returns          BTA_JV_SUCCESS, if the request is being processed.
+**                  BTA_JV_FAILURE, otherwise.
+**
+*******************************************************************************/
+tBTA_JV_STATUS BTA_JvRfcommWrite(UINT32 handle, UINT32 req_id)
+{
+    tBTA_JV_STATUS status = BTA_JV_FAILURE;
+    tBTA_JV_API_RFCOMM_WRITE *p_msg;
+    UINT32  hi = (handle & BTA_JV_RFC_HDL_MASK) - 1;
+    UINT32  si = BTA_JV_RFC_HDL_TO_SIDX(handle);
+
+    APPL_TRACE_API0( "BTA_JvRfcommWrite");
+    APPL_TRACE_DEBUG3( "handle:0x%x, hi:%d, si:%d", handle, hi, si);
+    if (hi < BTA_JV_MAX_RFC_CONN && bta_jv_cb.rfc_cb[hi].p_cback &&
+        si < BTA_JV_MAX_RFC_SR_SESSION && bta_jv_cb.rfc_cb[hi].rfc_hdl[si] &&
+        (p_msg = (tBTA_JV_API_RFCOMM_WRITE *)GKI_getbuf(sizeof(tBTA_JV_API_RFCOMM_WRITE))) != NULL)
+    {
+        p_msg->hdr.event = BTA_JV_API_RFCOMM_WRITE_EVT;
+        p_msg->handle = handle;
+        p_msg->req_id = req_id;
+        p_msg->p_cb = &bta_jv_cb.rfc_cb[hi];
+        p_msg->p_pcb = &bta_jv_cb.port_cb[p_msg->p_cb->rfc_hdl[si] - 1];
+        APPL_TRACE_API0( "write ok");
+        bta_sys_sendmsg(p_msg);
+        status = BTA_JV_SUCCESS;
+    }
+
+    return(status);
+}
+
diff --git a/bta/jv/bta_jv_cfg.c b/bta/jv/bta_jv_cfg.c
new file mode 100644
index 0000000..675801f
--- /dev/null
+++ b/bta/jv/bta_jv_cfg.c
@@ -0,0 +1,58 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for advanced
+ *  audio
+ *
+ ******************************************************************************/
+
+#include "gki.h"
+#include "bta_api.h"
+#include "bd.h"
+#include "bta_jv_api.h"
+
+#ifndef BTA_JV_SDP_DB_SIZE
+#define BTA_JV_SDP_DB_SIZE          4500
+#endif
+
+#ifndef BTA_JV_SDP_RAW_DATA_SIZE
+#define BTA_JV_SDP_RAW_DATA_SIZE    1800
+#endif
+
+/* The platform may choose to use dynamic memory for these data buffers.
+ * p_bta_jv_cfg->p_sdp_db must be allocated/stay allocated
+ * between BTA_JvEnable and BTA_JvDisable
+ * p_bta_jv_cfg->p_sdp_raw_data can be allocated before calling BTA_JvStartDiscovery
+ * it can be de-allocated after the last call to access the database */
+static UINT8 bta_jv_sdp_raw_data[BTA_JV_SDP_RAW_DATA_SIZE];
+static UINT8 bta_jv_sdp_db_data[BTA_JV_SDP_DB_SIZE];
+
+/* JV configuration structure */
+const tBTA_JV_CFG bta_jv_cfg =
+{
+    BTA_JV_SDP_RAW_DATA_SIZE,   /* The size of p_sdp_raw_data */
+    BTA_JV_SDP_DB_SIZE,         /* The size of p_sdp_db_data */
+    bta_jv_sdp_raw_data,        /* The data buffer to keep raw data */
+    (tSDP_DISCOVERY_DB *)bta_jv_sdp_db_data /* The data buffer to keep SDP database */
+};
+
+tBTA_JV_CFG *p_bta_jv_cfg = (tBTA_JV_CFG *) &bta_jv_cfg;
+
+
diff --git a/bta/jv/bta_jv_int.h b/bta/jv/bta_jv_int.h
new file mode 100644
index 0000000..5a0aaed
--- /dev/null
+++ b/bta/jv/bta_jv_int.h
@@ -0,0 +1,461 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA Java I/F
+ *
+ ******************************************************************************/
+#ifndef BTA_JV_INT_H
+#define BTA_JV_INT_H
+
+#include "bta_sys.h"
+#include "bta_api.h"
+#include "bta_jv_api.h"
+#include "rfcdefs.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+enum
+{
+    /* these events are handled by the state machine */
+    BTA_JV_API_ENABLE_EVT = BTA_SYS_EVT_START(BTA_ID_JV),
+    BTA_JV_API_DISABLE_EVT,
+    BTA_JV_API_SET_DISCOVERABILITY_EVT,
+    BTA_JV_API_GET_LOCAL_DEVICE_ADDR_EVT,
+    BTA_JV_API_GET_LOCAL_DEVICE_NAME_EVT,
+    BTA_JV_API_GET_REMOTE_DEVICE_NAME_EVT,
+    BTA_JV_API_SET_SERVICE_CLASS_EVT,
+    BTA_JV_API_SET_ENCRYPTION_EVT,
+    BTA_JV_API_GET_SCN_EVT,
+    BTA_JV_API_FREE_SCN_EVT,
+    BTA_JV_API_START_DISCOVERY_EVT,
+    BTA_JV_API_CANCEL_DISCOVERY_EVT,
+    BTA_JV_API_GET_SERVICES_LENGTH_EVT,
+    BTA_JV_API_SERVICE_SELECT_EVT,
+    BTA_JV_API_CREATE_RECORD_EVT,
+    BTA_JV_API_UPDATE_RECORD_EVT,
+    BTA_JV_API_ADD_ATTRIBUTE_EVT,
+    BTA_JV_API_DELETE_ATTRIBUTE_EVT,
+    BTA_JV_API_DELETE_RECORD_EVT,
+    BTA_JV_API_L2CAP_CONNECT_EVT,
+    BTA_JV_API_L2CAP_CLOSE_EVT,
+    BTA_JV_API_L2CAP_START_SERVER_EVT,
+    BTA_JV_API_L2CAP_STOP_SERVER_EVT,
+    BTA_JV_API_L2CAP_READ_EVT,
+    BTA_JV_API_L2CAP_WRITE_EVT,
+    BTA_JV_API_RFCOMM_CONNECT_EVT,
+    BTA_JV_API_RFCOMM_CLOSE_EVT,
+    BTA_JV_API_RFCOMM_START_SERVER_EVT,
+    BTA_JV_API_RFCOMM_STOP_SERVER_EVT,
+    BTA_JV_API_RFCOMM_READ_EVT,
+    BTA_JV_API_RFCOMM_WRITE_EVT,
+    BTA_JV_MAX_INT_EVT
+};
+
+/* data type for BTA_JV_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    tBTA_JV_DM_CBACK   *p_cback;
+} tBTA_JV_API_ENABLE;
+
+/* data type for BTA_JV_API_SET_DISCOVERABILITY_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_JV_DISC    disc_mode;
+} tBTA_JV_API_SET_DISCOVERABILITY;
+
+
+/* data type for BTA_JV_API_SET_SERVICE_CLASS_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT32      service;
+} tBTA_JV_API_SET_SERVICE_CLASS;
+
+/* data type for BTA_JV_API_SET_ENCRYPTION_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+} tBTA_JV_API_SET_ENCRYPTION;
+
+/* data type for BTA_JV_API_GET_REMOTE_DEVICE_NAME_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR     bd_addr;
+} tBTA_JV_API_GET_REMOTE_NAME;
+
+/* data type for BTA_JV_API_START_DISCOVERY_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    BD_ADDR bd_addr;
+    UINT16 num_uuid;
+    tSDP_UUID uuid_list[BTA_JV_MAX_UUIDS];
+    UINT16 num_attr;
+    UINT16 attr_list[BTA_JV_MAX_ATTRS];
+    void            *user_data;      /* piggyback caller's private data*/
+} tBTA_JV_API_START_DISCOVERY;
+
+/* data type for BTA_JV_API_CANCEL_DISCOVERY_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    void            *user_data;      /* piggyback caller's private data*/
+} tBTA_JV_API_CANCEL_DISCOVERY;
+
+
+/* data type for BTA_JV_API_GET_SERVICES_LENGTH_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT16      *p_services_len;
+    BOOLEAN     inc_hdr;
+} tBTA_JV_API_GET_SERVICES_LENGTH;
+
+/* data type for BTA_JV_API_GET_SERVICE_RESULT_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT8        **TLVs;
+} tBTA_JV_API_GET_SERVICE_RESULT;
+
+/* data type for BTA_JV_API_SERVICE_SELECT_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT16        uuid;
+} tBTA_JV_API_SERVICE_SELECT;
+
+enum
+{
+    BTA_JV_ST_NONE = 0,
+    BTA_JV_ST_CL_OPENING,
+    BTA_JV_ST_CL_OPEN,
+    BTA_JV_ST_CL_CLOSING,
+    BTA_JV_ST_SR_LISTEN,
+    BTA_JV_ST_SR_OPEN,
+    BTA_JV_ST_SR_CLOSING
+} ;
+typedef UINT8  tBTA_JV_STATE;
+#define BTA_JV_ST_CL_MAX    BTA_JV_ST_CL_CLOSING
+
+/* JV L2CAP control block */
+typedef struct
+{
+    tBTA_JV_L2CAP_CBACK *p_cback;   /* the callback function */
+    UINT16              psm;        /* the psm used for this server connection */
+    tBTA_JV_STATE       state;      /* the state of this control block */
+    tBTA_SERVICE_ID     sec_id;     /* service id */
+    UINT16              handle;     /* the handle reported to java app (same as gap handle) */
+    BOOLEAN             cong;       /* TRUE, if congested */
+} tBTA_JV_L2C_CB;
+
+#define BTA_JV_RFC_HDL_MASK         0xFF
+#define BTA_JV_RFC_HDL_TO_SIDX(r)   (((r)&0xFF00) >> 8)
+#define BTA_JV_RFC_H_S_TO_HDL(h, s) ((h)|(s<<8))
+
+/* port control block */
+typedef struct
+{
+    UINT32              handle;     /* the rfcomm session handle at jv */
+    UINT16              port_handle; /* port handle */
+    tBTA_JV_STATE       state;      /* the state of this control block */
+    UINT8               max_sess;   /* max sessions */
+    void                *user_data; /* piggyback caller's private data*/
+    BOOLEAN             cong;       /* TRUE, if congested */
+} tBTA_JV_PCB;
+
+/* JV RFCOMM control block */
+typedef struct
+{
+    tBTA_JV_RFCOMM_CBACK *p_cback;  /* the callback function */
+    UINT16              rfc_hdl[BTA_JV_MAX_RFC_SR_SESSION];
+    tBTA_SERVICE_ID     sec_id;     /* service id */
+    UINT8               handle;     /* index: the handle reported to java app */
+    UINT8               scn;        /* the scn of the server */
+    UINT8               max_sess;   /* max sessions */
+} tBTA_JV_RFC_CB;
+
+/* data type for BTA_JV_API_L2CAP_CONNECT_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    tBTA_SEC        sec_mask;
+    tBTA_JV_ROLE    role;
+    UINT16          remote_psm;
+    UINT16          rx_mtu;
+    BD_ADDR         peer_bd_addr;
+    tBTA_JV_L2CAP_CBACK *p_cback;
+} tBTA_JV_API_L2CAP_CONNECT;
+
+/* data type for BTA_JV_API_L2CAP_SERVER_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    tBTA_SEC            sec_mask;
+    tBTA_JV_ROLE        role;
+    UINT16              local_psm;
+    UINT16              rx_mtu;
+    tBTA_JV_L2CAP_CBACK *p_cback;
+} tBTA_JV_API_L2CAP_SERVER;
+
+/* data type for BTA_JV_API_L2CAP_CLOSE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          handle;
+    tBTA_JV_L2C_CB  *p_cb;
+} tBTA_JV_API_L2CAP_CLOSE;
+
+/* data type for BTA_JV_API_L2CAP_READ_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT16              handle;
+    UINT32              req_id;
+    tBTA_JV_L2CAP_CBACK *p_cback;
+    UINT8*              p_data;
+    UINT16              len;
+} tBTA_JV_API_L2CAP_READ;
+
+/* data type for BTA_JV_API_L2CAP_WRITE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;
+    UINT16              handle;
+    UINT32              req_id;
+    tBTA_JV_L2C_CB      *p_cb;
+    UINT8               *p_data;
+    UINT16              len;
+} tBTA_JV_API_L2CAP_WRITE;
+
+/* data type for BTA_JV_API_RFCOMM_CONNECT_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    tBTA_SEC        sec_mask;
+    tBTA_JV_ROLE    role;
+    UINT8           remote_scn;
+    BD_ADDR         peer_bd_addr;
+    tBTA_JV_RFCOMM_CBACK *p_cback;
+    void            *user_data;
+} tBTA_JV_API_RFCOMM_CONNECT;
+
+/* data type for BTA_JV_API_RFCOMM_SERVER_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    tBTA_SEC        sec_mask;
+    tBTA_JV_ROLE    role;
+    UINT8           local_scn;
+    UINT8           max_session;
+    int             rfc_handle;
+    tBTA_JV_RFCOMM_CBACK *p_cback;
+    void            *user_data;
+} tBTA_JV_API_RFCOMM_SERVER;
+
+/* data type for BTA_JV_API_RFCOMM_READ_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          handle;
+    UINT32          req_id;
+    UINT8           *p_data;
+    UINT16          len;
+    tBTA_JV_RFC_CB  *p_cb;
+    tBTA_JV_PCB     *p_pcb;
+} tBTA_JV_API_RFCOMM_READ;
+
+/* data type for BTA_JV_API_RFCOMM_WRITE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          handle;
+    UINT32          req_id;
+    UINT8           *p_data;
+    int          len;
+    tBTA_JV_RFC_CB  *p_cb;
+    tBTA_JV_PCB     *p_pcb;
+} tBTA_JV_API_RFCOMM_WRITE;
+
+/* data type for BTA_JV_API_RFCOMM_CLOSE_EVT */
+typedef struct
+{
+    BT_HDR          hdr;
+    UINT16          handle;
+    tBTA_JV_RFC_CB  *p_cb;
+    tBTA_JV_PCB     *p_pcb;
+} tBTA_JV_API_RFCOMM_CLOSE;
+
+/* data type for BTA_JV_API_CREATE_RECORD_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    void        *user_data;
+} tBTA_JV_API_CREATE_RECORD;
+
+/* data type for BTA_JV_API_UPDATE_RECORD_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT32      handle;
+    UINT16      *p_ids;
+    UINT8       **p_values;
+    INT32       *p_value_sizes;
+    INT32       array_len;
+} tBTA_JV_API_UPDATE_RECORD;
+
+/* data type for BTA_JV_API_ADD_ATTRIBUTE_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT32      handle;
+    UINT16      attr_id;
+    UINT8       *p_value;
+    INT32       value_size;
+} tBTA_JV_API_ADD_ATTRIBUTE;
+
+/* data type for BTA_JV_API_FREE_SCN_EVT */
+typedef struct
+{
+    BT_HDR      hdr;
+    UINT8       scn;
+} tBTA_JV_API_FREE_SCN;
+/* union of all data types */
+typedef union
+{
+    /* GKI event buffer header */
+    BT_HDR                          hdr;
+    tBTA_JV_API_ENABLE              enable;
+    tBTA_JV_API_SET_DISCOVERABILITY set_discoverability;
+    tBTA_JV_API_GET_REMOTE_NAME     get_rmt_name;
+    tBTA_JV_API_SET_SERVICE_CLASS   set_service;
+    tBTA_JV_API_SET_ENCRYPTION      set_encrypt;
+    tBTA_JV_API_START_DISCOVERY     start_discovery;
+    tBTA_JV_API_CANCEL_DISCOVERY    cancel_discovery;
+    tBTA_JV_API_GET_SERVICES_LENGTH get_services_length;
+    tBTA_JV_API_GET_SERVICE_RESULT  get_service_result;
+    tBTA_JV_API_SERVICE_SELECT      service_select;
+    tBTA_JV_API_FREE_SCN            free_scn;
+    tBTA_JV_API_CREATE_RECORD       create_record;
+    tBTA_JV_API_UPDATE_RECORD       update_record;
+    tBTA_JV_API_ADD_ATTRIBUTE       add_attr;
+    tBTA_JV_API_L2CAP_CONNECT       l2cap_connect;
+    tBTA_JV_API_L2CAP_READ          l2cap_read;
+    tBTA_JV_API_L2CAP_WRITE         l2cap_write;
+    tBTA_JV_API_L2CAP_CLOSE         l2cap_close;
+    tBTA_JV_API_L2CAP_SERVER        l2cap_server;
+    tBTA_JV_API_RFCOMM_CONNECT      rfcomm_connect;
+    tBTA_JV_API_RFCOMM_READ         rfcomm_read;
+    tBTA_JV_API_RFCOMM_WRITE        rfcomm_write;
+    tBTA_JV_API_RFCOMM_CLOSE        rfcomm_close;
+    tBTA_JV_API_RFCOMM_SERVER       rfcomm_server;
+} tBTA_JV_MSG;
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+#define BTA_JV_L2C_FOR_SDP_HDL     GAP_MAX_CONNECTIONS
+#endif
+
+/* JV control block */
+typedef struct
+{
+#if SDP_FOR_JV_INCLUDED == TRUE
+    UINT32                  sdp_for_jv;     /* The SDP client connection handle */
+    UINT32                  sdp_data_size;  /* the data len */
+#endif
+    /* the SDP handle reported to JV user is the (index + 1) to sdp_handle[].
+     * if sdp_handle[i]==0, it's not used.
+     * otherwise sdp_handle[i] is the stack SDP handle. */
+    UINT32                  sdp_handle[BTA_JV_MAX_SDP_REC]; /* SDP records created */
+    UINT8                   *p_sel_raw_data;/* the raw data of last service select */
+    INT32                   sel_len;        /* the SDP record size of last service select */
+    tBTA_JV_DM_CBACK        *p_dm_cback;
+    tBTA_JV_L2C_CB          l2c_cb[BTA_JV_MAX_L2C_CONN];    /* index is GAP handle (index) */
+    tBTA_JV_RFC_CB          rfc_cb[BTA_JV_MAX_RFC_CONN];
+    tBTA_JV_PCB             port_cb[MAX_RFC_PORTS];         /* index of this array is the port_handle, */
+    UINT8                   sec_id[BTA_JV_NUM_SERVICE_ID];  /* service ID */
+    BOOLEAN                 scn[BTA_JV_MAX_SCN];            /* SCN allocated by java */
+    UINT8                   sdp_active;                     /* see BTA_JV_SDP_ACT_* */
+    tSDP_UUID               uuid;                           /* current uuid of sdp discovery*/
+    void                    *user_data;                     /* piggyback user data*/
+} tBTA_JV_CB;
+
+enum
+{
+    BTA_JV_SDP_ACT_NONE = 0,
+    BTA_JV_SDP_ACT_YES,     /* waiting for SDP result */
+    BTA_JV_SDP_ACT_CANCEL   /* waiting for cancel complete */
+};
+
+/* JV control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_JV_CB bta_jv_cb;
+#else
+extern tBTA_JV_CB *bta_jv_cb_ptr;
+#define bta_jv_cb (*bta_jv_cb_ptr)
+#endif
+
+/* config struct */
+extern tBTA_JV_CFG *p_bta_jv_cfg;
+
+/* this is defined in stack/sdp. used by bta jv */
+extern UINT8 *sdpu_get_len_from_type (UINT8 *p, UINT8 type, UINT32 *p_len);
+
+extern BOOLEAN bta_jv_sm_execute(BT_HDR *p_msg);
+
+extern UINT32 bta_jv_get_sdp_handle(UINT32 sdp_id);
+extern void bta_jv_enable (tBTA_JV_MSG *p_data);
+extern void bta_jv_disable (tBTA_JV_MSG *p_data);
+extern void bta_jv_set_discoverability (tBTA_JV_MSG *p_data);
+extern void bta_jv_get_local_device_addr (tBTA_JV_MSG *p_data);
+extern void bta_jv_get_local_device_name (tBTA_JV_MSG *p_data);
+extern void bta_jv_get_remote_device_name (tBTA_JV_MSG *p_data);
+extern void bta_jv_set_service_class (tBTA_JV_MSG *p_data);
+extern void bta_jv_set_encryption (tBTA_JV_MSG *p_data);
+extern void bta_jv_get_scn (tBTA_JV_MSG *p_data);
+extern void bta_jv_free_scn (tBTA_JV_MSG *p_data);
+extern void bta_jv_start_discovery (tBTA_JV_MSG *p_data);
+extern void bta_jv_cancel_discovery (tBTA_JV_MSG *p_data);
+extern void bta_jv_get_services_length (tBTA_JV_MSG *p_data);
+extern void bta_jv_service_select (tBTA_JV_MSG *p_data);
+extern void bta_jv_create_record (tBTA_JV_MSG *p_data);
+extern void bta_jv_update_record (tBTA_JV_MSG *p_data);
+extern void bta_jv_add_attribute (tBTA_JV_MSG *p_data);
+extern void bta_jv_delete_attribute (tBTA_JV_MSG *p_data);
+extern void bta_jv_delete_record (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_connect (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_close (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_start_server (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_stop_server (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_read (tBTA_JV_MSG *p_data);
+extern void bta_jv_l2cap_write (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_connect (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_close (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_start_server (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_stop_server (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_read (tBTA_JV_MSG *p_data);
+extern void bta_jv_rfcomm_write (tBTA_JV_MSG *p_data);
+
+#endif /* BTA_JV_INT_H */
diff --git a/bta/jv/bta_jv_main.c b/bta/jv/bta_jv_main.c
new file mode 100644
index 0000000..0cba56b
--- /dev/null
+++ b/bta/jv/bta_jv_main.c
@@ -0,0 +1,103 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the main implementation file for the BTA Java I/F
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_jv_api.h"
+#include "bta_jv_int.h"
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_JV_CB bta_jv_cb;
+#endif
+
+/* state machine action enumeration list */
+#define BTA_JV_NUM_ACTIONS  (BTA_JV_MAX_INT_EVT & 0x00ff)
+
+/* type for action functions */
+typedef void (*tBTA_JV_ACTION)(tBTA_JV_MSG *p_data);
+
+/* action function list */
+const tBTA_JV_ACTION bta_jv_action[] =
+{
+    bta_jv_enable,                  /* BTA_JV_API_ENABLE_EVT */
+    bta_jv_disable,                 /* BTA_JV_API_DISABLE_EVT */
+    bta_jv_set_discoverability,     /* BTA_JV_API_SET_DISCOVERABILITY_EVT */
+    bta_jv_get_local_device_addr,   /* BTA_JV_API_GET_LOCAL_DEVICE_ADDR_EVT */
+    bta_jv_get_local_device_name,   /* BTA_JV_API_GET_LOCAL_DEVICE_NAME_EVT */
+    bta_jv_get_remote_device_name,  /* BTA_JV_API_GET_REMOTE_DEVICE_NAME_EVT */
+    bta_jv_set_service_class,       /* BTA_JV_API_SET_SERVICE_CLASS_EVT */
+    bta_jv_set_encryption,          /* BTA_JV_API_SET_ENCRYPTION_EVT */
+    bta_jv_get_scn,                 /* BTA_JV_API_GET_SCN_EVT */
+    bta_jv_free_scn,                /* BTA_JV_API_FREE_SCN_EVT */
+    bta_jv_start_discovery,         /* BTA_JV_API_START_DISCOVERY_EVT */
+    bta_jv_cancel_discovery,        /* BTA_JV_API_CANCEL_DISCOVERY_EVT */
+    bta_jv_get_services_length,     /* BTA_JV_API_GET_SERVICES_LENGTH_EVT */
+    bta_jv_service_select,          /* BTA_JV_API_SERVICE_SELECT_EVT */
+    bta_jv_create_record,           /* BTA_JV_API_CREATE_RECORD_EVT */
+    bta_jv_update_record,           /* BTA_JV_API_UPDATE_RECORD_EVT */
+    bta_jv_add_attribute,           /* BTA_JV_API_ADD_ATTRIBUTE_EVT */
+    bta_jv_delete_attribute,        /* BTA_JV_API_DELETE_ATTRIBUTE_EVT */
+    bta_jv_delete_record,           /* BTA_JV_API_DELETE_RECORD_EVT */
+    bta_jv_l2cap_connect,           /* BTA_JV_API_L2CAP_CONNECT_EVT */
+    bta_jv_l2cap_close,             /* BTA_JV_API_L2CAP_CLOSE_EVT */
+    bta_jv_l2cap_start_server,      /* BTA_JV_API_L2CAP_START_SERVER_EVT */
+    bta_jv_l2cap_stop_server,       /* BTA_JV_API_L2CAP_STOP_SERVER_EVT */
+    bta_jv_l2cap_read,              /* BTA_JV_API_L2CAP_READ_EVT */
+    bta_jv_l2cap_write,             /* BTA_JV_API_L2CAP_WRITE_EVT */
+    bta_jv_rfcomm_connect,          /* BTA_JV_API_RFCOMM_CONNECT_EVT */
+    bta_jv_rfcomm_close,            /* BTA_JV_API_RFCOMM_CLOSE_EVT */
+    bta_jv_rfcomm_start_server,     /* BTA_JV_API_RFCOMM_START_SERVER_EVT */
+    bta_jv_rfcomm_stop_server,      /* BTA_JV_API_RFCOMM_STOP_SERVER_EVT */
+    bta_jv_rfcomm_read,             /* BTA_JV_API_RFCOMM_READ_EVT */
+    bta_jv_rfcomm_write             /* BTA_JV_API_RFCOMM_WRITE_EVT */
+};
+
+/*******************************************************************************
+**
+** Function         bta_jv_sm_execute
+**
+** Description      State machine event handling function for JV
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_jv_sm_execute(BT_HDR *p_msg)
+{
+    BOOLEAN ret = FALSE;
+    UINT16 action = (p_msg->event & 0x00ff);
+    /* execute action functions */
+
+    if(action < BTA_JV_NUM_ACTIONS)
+    {
+        (*bta_jv_action[action])((tBTA_JV_MSG*)p_msg);
+        ret = TRUE;
+    }
+
+    return(ret);
+}
diff --git a/bta/pan/bta_pan_act.c b/bta/pan/bta_pan_act.c
new file mode 100644
index 0000000..b29920f
--- /dev/null
+++ b/bta/pan/bta_pan_act.c
@@ -0,0 +1,728 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the pan action functions for the state machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(PAN_INCLUDED) && (PAN_INCLUDED == TRUE)
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bd.h"
+#include "gki.h"
+#include "pan_api.h"
+#include "bta_pan_api.h"
+#include "bta_pan_int.h"
+#include "bta_pan_co.h"
+#include <string.h>
+
+
+/* RX and TX data flow mask */
+#define BTA_PAN_RX_MASK              0x0F
+#define BTA_PAN_TX_MASK              0xF0
+
+/*******************************************************************************
+**
+** Function         bta_pan_conn_state_cback
+**
+** Description      Connection state callback from Pan profile
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_conn_state_cback(UINT16 handle, BD_ADDR bd_addr, tPAN_RESULT state,
+                                     BOOLEAN is_role_change, UINT8 src_role, UINT8 dst_role)
+{
+
+    tBTA_PAN_CONN * p_buf;
+    tBTA_PAN_SCB     *p_scb;
+
+
+    if ((p_buf = (tBTA_PAN_CONN *) GKI_getbuf(sizeof(tBTA_PAN_CONN))) != NULL)
+    {
+        if((state == PAN_SUCCESS) && !is_role_change)
+        {
+            p_buf->hdr.event = BTA_PAN_CONN_OPEN_EVT;
+            if((p_scb = bta_pan_scb_by_handle(handle)) == NULL)
+            {
+                /* allocate an scb */
+                p_scb = bta_pan_scb_alloc();
+
+            }
+            /* we have exceeded maximum number of connections */
+            if(!p_scb)
+            {
+                PAN_Disconnect (handle);
+                return;
+            }
+
+            p_scb->handle = handle;
+            p_scb->local_role = src_role;
+            p_scb->peer_role = dst_role;
+            p_scb->pan_flow_enable = TRUE;
+            bdcpy(p_scb->bd_addr, bd_addr);
+            GKI_init_q(&p_scb->data_queue);
+
+            if(src_role == PAN_ROLE_CLIENT)
+                p_scb->app_id = bta_pan_cb.app_id[0];
+            else if (src_role == PAN_ROLE_GN_SERVER)
+                p_scb->app_id = bta_pan_cb.app_id[1];
+            else if (src_role == PAN_ROLE_NAP_SERVER)
+                p_scb->app_id = bta_pan_cb.app_id[2];
+
+        }
+        else if((state != PAN_SUCCESS) && !is_role_change)
+        {
+            p_buf->hdr.event = BTA_PAN_CONN_CLOSE_EVT;
+
+        }
+        else
+        {
+            return;
+        }
+
+        p_buf->result = state;
+        p_buf->hdr.layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+
+    }
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_data_flow_cb
+**
+** Description      Data flow status callback from PAN
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_data_flow_cb(UINT16 handle, tPAN_RESULT result)
+{
+    BT_HDR  *p_buf;
+    tBTA_PAN_SCB *p_scb;
+
+    if((p_scb = bta_pan_scb_by_handle(handle)) == NULL)
+        return;
+
+    if(result == PAN_TX_FLOW_ON)
+    {
+        if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+        {
+            p_buf->layer_specific = handle;
+            p_buf->event = BTA_PAN_BNEP_FLOW_ENABLE_EVT;
+            bta_sys_sendmsg(p_buf);
+        }
+        bta_pan_co_rx_flow(handle, p_scb->app_id, TRUE);
+
+    }
+    else if(result == PAN_TX_FLOW_OFF)
+    {
+
+        p_scb->pan_flow_enable = FALSE;
+        bta_pan_co_rx_flow(handle, p_scb->app_id, FALSE);
+
+    }
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_data_buf_ind_cback
+**
+** Description      data indication callback from pan profile
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_data_buf_ind_cback(UINT16 handle, BD_ADDR src, BD_ADDR dst, UINT16 protocol, BT_HDR *p_buf,
+                                   BOOLEAN ext, BOOLEAN forward)
+{
+    tBTA_PAN_SCB *p_scb;
+    BT_HDR * p_event;
+    BT_HDR *p_new_buf;
+
+    if ( sizeof(tBTA_PAN_DATA_PARAMS) > p_buf->offset )
+    {
+        /* offset smaller than data structure in front of actual data */
+        p_new_buf = (BT_HDR *)GKI_getpoolbuf( PAN_POOL_ID );
+        if(!p_new_buf)
+        {
+            APPL_TRACE_WARNING0("Cannot get a PAN GKI buffer");
+            GKI_freebuf( p_buf );
+            return;
+        }
+        else
+        {
+            memcpy( (UINT8 *)(p_new_buf+1)+sizeof(tBTA_PAN_DATA_PARAMS), (UINT8 *)(p_buf+1)+p_buf->offset, p_buf->len );
+            p_new_buf->len    = p_buf->len;
+            p_new_buf->offset = sizeof(tBTA_PAN_DATA_PARAMS);
+            GKI_freebuf( p_buf );
+        }
+    }
+    else
+    {
+        p_new_buf = p_buf;
+    }
+    /* copy params into the space before the data */
+    bdcpy(((tBTA_PAN_DATA_PARAMS *)p_new_buf)->src, src);
+    bdcpy(((tBTA_PAN_DATA_PARAMS *)p_new_buf)->dst, dst);
+    ((tBTA_PAN_DATA_PARAMS *)p_new_buf)->protocol = protocol;
+    ((tBTA_PAN_DATA_PARAMS *)p_new_buf)->ext = ext;
+    ((tBTA_PAN_DATA_PARAMS *)p_new_buf)->forward = forward;
+
+
+    if((p_scb = bta_pan_scb_by_handle(handle)) == NULL)
+    {
+
+        GKI_freebuf( p_new_buf );
+        return;
+    }
+
+    GKI_enqueue(&p_scb->data_queue, p_new_buf);
+    if ((p_event = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_event->layer_specific = handle;
+        p_event->event = BTA_PAN_RX_FROM_BNEP_READY_EVT;
+        bta_sys_sendmsg(p_event);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_pfilt_ind_cback
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_pfilt_ind_cback(UINT16 handle, BOOLEAN indication,tBNEP_RESULT result,
+                                    UINT16 num_filters, UINT8 *p_filters)
+{
+
+    bta_pan_co_pfilt_ind(handle, indication, (tBTA_PAN_STATUS)((result == BNEP_SUCCESS) ? BTA_PAN_SUCCESS : BTA_PAN_FAIL),
+                                    num_filters, p_filters);
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_mfilt_ind_cback
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_mfilt_ind_cback(UINT16 handle, BOOLEAN indication,tBNEP_RESULT result,
+                                    UINT16 num_mfilters, UINT8 *p_mfilters)
+{
+
+    bta_pan_co_mfilt_ind(handle, indication, (tBTA_PAN_STATUS)((result == BNEP_SUCCESS) ? BTA_PAN_SUCCESS : BTA_PAN_FAIL),
+                                    num_mfilters, p_mfilters);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_enable
+**
+** Description
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_enable(tBTA_PAN_DATA *p_data)
+{
+    tPAN_REGISTER reg_data;
+    UINT16  initial_discoverability;
+    UINT16  initial_connectability;
+    UINT16  d_window;
+    UINT16  d_interval;
+    UINT16  c_window;
+    UINT16  c_interval;
+
+    bta_pan_cb.p_cback = p_data->api_enable.p_cback;
+
+    reg_data.pan_conn_state_cb  = bta_pan_conn_state_cback;
+    reg_data.pan_bridge_req_cb  = NULL;
+    reg_data.pan_data_buf_ind_cb = bta_pan_data_buf_ind_cback;
+    reg_data.pan_data_ind_cb = NULL;
+    reg_data.pan_pfilt_ind_cb = bta_pan_pfilt_ind_cback;
+    reg_data.pan_mfilt_ind_cb = bta_pan_mfilt_ind_cback;
+    reg_data.pan_tx_data_flow_cb = bta_pan_data_flow_cb;
+
+    /* read connectability and discoverability settings.
+    Pan profile changes the settings. We have to change it back to
+    be consistent with other bta subsystems */
+    initial_connectability = BTM_ReadConnectability(&c_window, &c_interval);
+    initial_discoverability = BTM_ReadDiscoverability(&d_window, &d_interval);
+
+
+    PAN_Register (&reg_data);
+
+
+    /* set it back to original value */
+    BTM_SetDiscoverability(initial_discoverability, d_window, d_interval);
+    BTM_SetConnectability(initial_connectability, c_window, c_interval);
+
+    bta_pan_cb.flow_mask = bta_pan_co_init(&bta_pan_cb.q_level);
+    bta_pan_cb.p_cback(BTA_PAN_ENABLE_EVT, NULL);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_set_role
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_set_role(tBTA_PAN_DATA *p_data)
+{
+    tPAN_RESULT status;
+    tBTA_PAN_SET_ROLE set_role;
+    UINT8  sec[3];
+
+
+    bta_pan_cb.app_id[0] = p_data->api_set_role.user_app_id;
+    bta_pan_cb.app_id[1] = p_data->api_set_role.gn_app_id;
+    bta_pan_cb.app_id[2] = p_data->api_set_role.nap_app_id;
+
+    sec[0] = p_data->api_set_role.user_sec_mask;
+    sec[1] = p_data->api_set_role.gn_sec_mask;
+    sec[2] = p_data->api_set_role.nap_sec_mask;
+
+    /* set security correctly in api and here */
+    status = PAN_SetRole(p_data->api_set_role.role, sec,
+                                     p_data->api_set_role.user_name,
+                                     p_data->api_set_role.gn_name,
+                                     p_data->api_set_role.nap_name);
+
+    set_role.role = p_data->api_set_role.role;
+    if(status == PAN_SUCCESS)
+    {
+        if(p_data->api_set_role.role & PAN_ROLE_NAP_SERVER )
+            bta_sys_add_uuid(UUID_SERVCLASS_NAP);
+        else
+            bta_sys_remove_uuid(UUID_SERVCLASS_NAP);
+
+        if(p_data->api_set_role.role & PAN_ROLE_GN_SERVER )
+            bta_sys_add_uuid(UUID_SERVCLASS_GN);
+        else
+            bta_sys_remove_uuid(UUID_SERVCLASS_GN);
+
+        if(p_data->api_set_role.role & PAN_ROLE_CLIENT )
+            bta_sys_add_uuid(UUID_SERVCLASS_PANU);
+        else
+            bta_sys_remove_uuid(UUID_SERVCLASS_PANU);
+
+        set_role.status = BTA_PAN_SUCCESS;
+    }
+    /* if status is not success clear everything */
+    else
+    {
+        PAN_SetRole(0, 0, NULL, NULL, NULL);
+        bta_sys_remove_uuid(UUID_SERVCLASS_NAP);
+        bta_sys_remove_uuid(UUID_SERVCLASS_GN);
+        bta_sys_remove_uuid(UUID_SERVCLASS_PANU);
+        set_role.status = BTA_PAN_FAIL;
+    }
+    bta_pan_cb.p_cback(BTA_PAN_SET_ROLE_EVT, (tBTA_PAN *)&set_role);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_disable
+**
+** Description
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_disable(void)
+{
+
+    BT_HDR *p_buf;
+    tBTA_PAN_SCB *p_scb = &bta_pan_cb.scb[0];
+    UINT8 i;
+
+
+    /* close all connections */
+    PAN_SetRole (0, NULL, NULL, NULL, NULL);
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+    bta_sys_remove_uuid(UUID_SERVCLASS_NAP);
+    bta_sys_remove_uuid(UUID_SERVCLASS_GN);
+    bta_sys_remove_uuid(UUID_SERVCLASS_PANU);
+#endif
+    /* free all queued up data buffers */
+    for (i = 0; i < BTA_PAN_NUM_CONN; i++, p_scb++)
+    {
+        if (p_scb->in_use)
+        {
+            while((p_buf = (BT_HDR *)GKI_dequeue(&p_scb->data_queue)) != NULL)
+                GKI_freebuf(p_buf);
+
+            bta_pan_co_close(p_scb->handle, p_scb->app_id);
+
+        }
+    }
+
+
+
+    PAN_Deregister();
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_open
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_open(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+    tPAN_RESULT status;
+    tBTA_PAN_OPEN data;
+    tBTA_PAN_OPENING    opening;
+
+
+    status = PAN_Connect (p_data->api_open.bd_addr, p_data->api_open.local_role, p_data->api_open.peer_role,
+                        &p_scb->handle);
+
+
+    if(status == PAN_SUCCESS)
+    {
+
+        bdcpy(p_scb->bd_addr, p_data->api_open.bd_addr);
+        p_scb->local_role = p_data->api_open.local_role;
+        p_scb->peer_role = p_data->api_open.peer_role;
+        bdcpy(opening.bd_addr, p_data->api_open.bd_addr);
+        opening.handle = p_scb->handle;
+        bta_pan_cb.p_cback(BTA_PAN_OPENING_EVT, (tBTA_PAN *)&opening);
+
+
+    }
+    else
+    {
+        bta_pan_scb_dealloc(p_scb);
+        bdcpy(data.bd_addr, p_data->api_open.bd_addr);
+        data.status = BTA_PAN_FAIL;
+        bta_pan_cb.p_cback(BTA_PAN_OPEN_EVT, (tBTA_PAN *)&data);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_close
+**
+** Description
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_api_close (tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+    tBTA_PAN_CONN * p_buf;
+
+    PAN_Disconnect (p_scb->handle);
+
+
+    /* send an event to BTA so that application will get the connection
+       close event */
+    if ((p_buf = (tBTA_PAN_CONN *) GKI_getbuf(sizeof(tBTA_PAN_CONN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_PAN_CONN_CLOSE_EVT;
+
+        p_buf->hdr.layer_specific = p_scb->handle;
+        bta_sys_sendmsg(p_buf);
+
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_conn_open
+**
+** Description      process connection open event
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_conn_open(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+
+    tBTA_PAN_OPEN data;
+
+    bdcpy(data.bd_addr, p_scb->bd_addr);
+    data.handle = p_scb->handle;
+    data.local_role = p_scb->local_role;
+    data.peer_role = p_scb->peer_role;
+
+    if(p_data->conn.result == PAN_SUCCESS)
+    {
+        data.status = BTA_PAN_SUCCESS;
+        bta_pan_co_open(p_scb->handle, p_scb->app_id, p_scb->local_role, p_scb->peer_role, p_scb->bd_addr);
+
+    }
+    else
+    {
+        bta_pan_scb_dealloc(p_scb);
+        data.status = BTA_PAN_FAIL;
+    }
+
+    p_scb->pan_flow_enable = TRUE;
+    p_scb->app_flow_enable = TRUE;
+
+    bta_sys_conn_open( BTA_ID_PAN ,p_scb->app_id, p_scb->bd_addr);
+
+    bta_pan_cb.p_cback(BTA_PAN_OPEN_EVT, (tBTA_PAN *)&data);
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_conn_close
+**
+** Description      process connection close event
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_conn_close(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+
+    tBTA_PAN_CLOSE data;
+    BT_HDR *p_buf;
+
+    data.handle = p_data->hdr.layer_specific;
+
+
+    bta_sys_conn_close( BTA_ID_PAN ,p_scb->app_id, p_scb->bd_addr);
+
+    /* free all queued up data buffers */
+    while((p_buf = (BT_HDR *)GKI_dequeue(&p_scb->data_queue)) != NULL)
+        GKI_freebuf(p_buf);
+
+    GKI_init_q(&p_scb->data_queue);
+
+    bta_pan_co_close(p_scb->handle, p_scb->app_id);
+
+    bta_pan_scb_dealloc(p_scb);
+
+    bta_pan_cb.p_cback(BTA_PAN_CLOSE_EVT, (tBTA_PAN *)&data);
+
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_rx_path
+**
+** Description      Handle data on the RX path (data sent from the phone to
+**                  BTA).
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_rx_path(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+    /* if data path configured for rx pull */
+    if ((bta_pan_cb.flow_mask & BTA_PAN_RX_MASK) == BTA_PAN_RX_PULL)
+    {
+        /* if we can accept data */
+        if (p_scb->pan_flow_enable == TRUE)
+        {
+            /* call application callout function for rx path */
+            bta_pan_co_rx_path(p_scb->handle, p_scb->app_id);
+        }
+    }
+    /* else data path configured for rx push */
+    else
+    {
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_tx_path
+**
+** Description      Handle the TX data path (data sent from BTA to the phone).
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_tx_path(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+
+    BT_HDR * p_buf;
+    /* if data path configured for tx pull */
+    if ((bta_pan_cb.flow_mask & BTA_PAN_TX_MASK) == BTA_PAN_TX_PULL)
+    {
+        /* call application callout function for tx path */
+        bta_pan_co_tx_path(p_scb->handle, p_scb->app_id);
+
+        /* free data that exceeds queue level */
+        while(p_scb->data_queue.count > bta_pan_cb.q_level)
+            GKI_freebuf(GKI_dequeue(&p_scb->data_queue));
+    }
+    /* if configured for zero copy push */
+    else if ((bta_pan_cb.flow_mask & BTA_PAN_TX_MASK) == BTA_PAN_TX_PUSH_BUF)
+    {
+        /* if app can accept data */
+        if (p_scb->app_flow_enable == TRUE)
+        {
+            /* read data from the queue */
+            if ((p_buf = (BT_HDR *)GKI_dequeue(&p_scb->data_queue)) != NULL)
+            {
+                /* send data to application */
+                bta_pan_co_tx_writebuf(p_scb->handle,
+                                        p_scb->app_id,
+                                        ((tBTA_PAN_DATA_PARAMS *)p_buf)->src,
+                                        ((tBTA_PAN_DATA_PARAMS *)p_buf)->dst,
+                                        ((tBTA_PAN_DATA_PARAMS *)p_buf)->protocol,
+                                        p_buf,
+                                        ((tBTA_PAN_DATA_PARAMS *)p_buf)->ext,
+                                        ((tBTA_PAN_DATA_PARAMS *)p_buf)->forward);
+
+            }
+            /* free data that exceeds queue level  */
+            while(p_scb->data_queue.count > bta_pan_cb.q_level)
+                GKI_freebuf(GKI_dequeue(&p_scb->data_queue));
+
+            /* if there is more data to be passed to
+            upper layer */
+            if(p_scb->data_queue.count)
+            {
+                if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+                {
+                    p_buf->layer_specific = p_scb->handle;
+                    p_buf->event = BTA_PAN_RX_FROM_BNEP_READY_EVT;
+                    bta_sys_sendmsg(p_buf);
+                }
+
+            }
+
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_tx_flow
+**
+** Description      Set the application flow control state.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_tx_flow(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+    p_scb->app_flow_enable = p_data->ci_tx_flow.enable;
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_write_buf
+**
+** Description      Handle a bta_pan_ci_rx_writebuf() and send data to PAN.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_write_buf(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+    if ((bta_pan_cb.flow_mask & BTA_PAN_RX_MASK) == BTA_PAN_RX_PUSH_BUF)
+    {
+
+        PAN_WriteBuf (p_scb->handle,
+                      ((tBTA_PAN_DATA_PARAMS *)p_data)->dst,
+                      ((tBTA_PAN_DATA_PARAMS *)p_data)->src,
+                      ((tBTA_PAN_DATA_PARAMS *)p_data)->protocol,
+                      (BT_HDR *)p_data,
+                      ((tBTA_PAN_DATA_PARAMS *)p_data)->ext);
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_free_buf
+**
+** Description      Frees the data buffer during closing state
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_free_buf(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data)
+{
+
+    GKI_freebuf(p_data);
+
+}
+
+#endif /* PAN_INCLUDED */
diff --git a/bta/pan/bta_pan_api.c b/bta/pan/bta_pan_api.c
new file mode 100644
index 0000000..6588230
--- /dev/null
+++ b/bta/pan/bta_pan_api.c
@@ -0,0 +1,214 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation of the API for PAN subsystem of BTA,
+ *  Broadcom's Bluetooth application layer for mobile phones.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_PAN_INCLUDED) && (BTA_PAN_INCLUDED == TRUE)
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "pan_api.h"
+#include "gki.h"
+#include "bta_pan_api.h"
+#include "bta_pan_int.h"
+#include "bd.h"
+#include <string.h>
+
+static const tBTA_SYS_REG bta_pan_reg =
+{
+    bta_pan_hdl_event,
+    BTA_PanDisable
+};
+
+/*******************************************************************************
+**
+** Function         BTA_PanEnable
+**
+** Description      Enable PAN service.  This function must be
+**                  called before any other functions in the PAN API are called.
+**                  When the enable operation is complete the callback function
+**                  will be called with a BTA_PAN_ENABLE_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_PanEnable(tBTA_PAN_CBACK p_cback)
+{
+    tBTA_PAN_API_ENABLE  *p_buf;
+
+    /* register with BTA system manager */
+    GKI_sched_lock();
+    bta_sys_register(BTA_ID_PAN, &bta_pan_reg);
+    GKI_sched_unlock();
+
+    if ((p_buf = (tBTA_PAN_API_ENABLE *) GKI_getbuf(sizeof(tBTA_PAN_API_ENABLE))) != NULL)
+    {
+        p_buf->hdr.event = BTA_PAN_API_ENABLE_EVT;
+        p_buf->p_cback = p_cback;
+
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTA_PanDisable
+**
+** Description      Disables PAN service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_PanDisable(void)
+{
+    BT_HDR  *p_buf;
+
+    bta_sys_deregister(BTA_ID_PAN);
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_PAN_API_DISABLE_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTA_PanSetRole
+**
+** Description      Sets PAN roles. When the enable operation is complete
+**                  the callback function will be called with a BTA_PAN_SET_ROLE_EVT.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTA_PanSetRole(tBTA_PAN_ROLE role, tBTA_PAN_ROLE_INFO *p_user_info, tBTA_PAN_ROLE_INFO *p_gn_info,
+                                        tBTA_PAN_ROLE_INFO *p_nap_info)
+{
+
+    tBTA_PAN_API_SET_ROLE  *p_buf;
+
+    if ((p_buf = (tBTA_PAN_API_SET_ROLE *) GKI_getbuf(sizeof(tBTA_PAN_API_SET_ROLE))) != NULL)
+    {
+        p_buf->hdr.event = BTA_PAN_API_SET_ROLE_EVT;
+        p_buf->role = role;
+
+        if(p_user_info && (role & BTA_PAN_ROLE_PANU))
+        {
+            if(p_user_info->p_srv_name)
+                BCM_STRNCPY_S(p_buf->user_name, sizeof(p_buf->user_name), p_user_info->p_srv_name, BTA_SERVICE_NAME_LEN);
+            else
+                p_buf->user_name[0] = 0;
+
+            p_buf->user_name[BTA_SERVICE_NAME_LEN] = 0;
+            p_buf->user_app_id = p_user_info->app_id;
+            p_buf->user_sec_mask = p_user_info->sec_mask;
+        }
+
+        if(p_gn_info && (role & BTA_PAN_ROLE_GN))
+        {
+            if(p_gn_info->p_srv_name)
+                BCM_STRNCPY_S(p_buf->gn_name, sizeof(p_buf->gn_name), p_gn_info->p_srv_name, BTA_SERVICE_NAME_LEN);
+            else
+                p_buf->gn_name[0] = 0;
+
+            p_buf->gn_name[BTA_SERVICE_NAME_LEN] = 0;
+            p_buf->gn_app_id = p_gn_info->app_id;
+            p_buf->gn_sec_mask = p_gn_info->sec_mask;
+
+        }
+
+        if(p_nap_info && (role & BTA_PAN_ROLE_NAP))
+        {
+            if(p_nap_info->p_srv_name)
+                BCM_STRNCPY_S(p_buf->nap_name, sizeof(p_buf->nap_name), p_nap_info->p_srv_name, BTA_SERVICE_NAME_LEN);
+            else
+                p_buf->nap_name[0] = 0;
+
+            p_buf->nap_name[BTA_SERVICE_NAME_LEN] = 0;
+            p_buf->nap_app_id = p_nap_info->app_id;
+            p_buf->nap_sec_mask = p_nap_info->sec_mask;
+
+        }
+
+        bta_sys_sendmsg(p_buf);
+    }
+
+
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_PanOpen
+**
+** Description      Opens a connection to a peer device.
+**                  When connection is open callback function is called
+**                  with a BTA_PAN_OPEN_EVT.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_PanOpen(BD_ADDR bd_addr, tBTA_PAN_ROLE    local_role, tBTA_PAN_ROLE    peer_role)
+{
+
+    tBTA_PAN_API_OPEN  *p_buf;
+
+    if ((p_buf = (tBTA_PAN_API_OPEN *) GKI_getbuf(sizeof(tBTA_PAN_API_OPEN))) != NULL)
+    {
+        p_buf->hdr.event = BTA_PAN_API_OPEN_EVT;
+        p_buf->local_role = local_role;
+        p_buf->peer_role = peer_role;
+        bdcpy(p_buf->bd_addr, bd_addr);
+        bta_sys_sendmsg(p_buf);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTA_PanClose
+**
+** Description      Close a PAN  connection to a peer device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void BTA_PanClose(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->event = BTA_PAN_API_CLOSE_EVT;
+        p_buf->layer_specific = handle;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+#endif /* BTA_PAN_INCLUDED */
diff --git a/bta/pan/bta_pan_ci.c b/bta/pan/bta_pan_ci.c
new file mode 100644
index 0000000..f8e5832
--- /dev/null
+++ b/bta/pan/bta_pan_ci.c
@@ -0,0 +1,260 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for data gateway call-in functions.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_PAN_INCLUDED) && (BTA_PAN_INCLUDED == TRUE)
+
+#include <string.h>
+
+#include "gki.h"
+#include "pan_api.h"
+#include "bd.h"
+#include "bta_api.h"
+#include "bta_pan_api.h"
+#include "bta_pan_ci.h"
+#include "bta_pan_int.h"
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_tx_ready
+**
+** Description      This function sends an event to PAN indicating the phone is
+**                  ready for more data and PAN should call bta_pan_co_tx_path().
+**                  This function is used when the TX data path is configured
+**                  to use a pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_tx_ready(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->layer_specific = handle;
+        p_buf->event = BTA_PAN_CI_TX_READY_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_rx_ready
+**
+** Description      This function sends an event to PAN indicating the phone
+**                  has data available to send to PAN and PAN should call
+**                  bta_pan_co_rx_path().  This function is used when the RX
+**                  data path is configured to use a pull interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_rx_ready(UINT16 handle)
+{
+    BT_HDR  *p_buf;
+
+    if ((p_buf = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+    {
+        p_buf->layer_specific = handle;
+        p_buf->event = BTA_PAN_CI_RX_READY_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_tx_flow
+**
+** Description      This function is called to enable or disable data flow on
+**                  the TX path.  The phone should call this function to
+**                  disable data flow when it is congested and cannot handle
+**                  any more data sent by bta_pan_co_tx_write() or
+**                  bta_pan_co_tx_writebuf().  This function is used when the
+**                  TX data path is configured to use a push interface.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_tx_flow(UINT16 handle, BOOLEAN enable)
+{
+    tBTA_PAN_CI_TX_FLOW  *p_buf;
+
+    if ((p_buf = (tBTA_PAN_CI_TX_FLOW *) GKI_getbuf(sizeof(tBTA_PAN_CI_TX_FLOW))) != NULL)
+    {
+        p_buf->hdr.layer_specific = handle;
+        p_buf->hdr.event = BTA_PAN_CI_TX_FLOW_EVT;
+        p_buf->enable = enable;
+        bta_sys_sendmsg(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_rx_write
+**
+** Description      This function is called to send data to PAN when the RX path
+**                  is configured to use a push interface.  The function copies
+**                  data to an event buffer and sends it to PAN.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_rx_write(UINT16 handle, BD_ADDR dst, BD_ADDR src, UINT16 protocol,
+                            UINT8 *p_data, UINT16 len, BOOLEAN ext)
+{
+    BT_HDR * p_buf;
+
+    if((p_buf = (BT_HDR *) GKI_getpoolbuf(PAN_POOL_ID)) != NULL)
+    {
+
+
+        p_buf->offset = PAN_MINIMUM_OFFSET;
+
+        /* copy all other params before the data */
+        bdcpy(((tBTA_PAN_DATA_PARAMS *)p_buf)->src, src);
+        bdcpy(((tBTA_PAN_DATA_PARAMS *)p_buf)->dst, dst);
+        ((tBTA_PAN_DATA_PARAMS *)p_buf)->protocol = protocol;
+        ((tBTA_PAN_DATA_PARAMS *)p_buf)->ext = ext;
+        p_buf->len=len;
+
+        /* copy data */
+        memcpy((UINT8 *)(p_buf + 1) + p_buf->offset, p_data, len);
+
+        p_buf->layer_specific = handle;
+        p_buf->event = BTA_PAN_CI_RX_WRITEBUF_EVT;
+        bta_sys_sendmsg(p_buf);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_rx_writebuf
+**
+** Description      This function is called to send data to the phone when
+**                  the RX path is configured to use a push interface with
+**                  zero copy.  The function sends an event to PAN containing
+**                  the data buffer.  The buffer must be allocated using
+**                  functions GKI_getbuf() or GKI_getpoolbuf().  The buffer
+**                  will be freed by BTA; the phone must not free the buffer.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_rx_writebuf(UINT16 handle, BD_ADDR dst, BD_ADDR src, UINT16 protocol,
+                            BT_HDR *p_buf, BOOLEAN ext)
+{
+
+    /* copy all other params before the data */
+    bdcpy(((tBTA_PAN_DATA_PARAMS *)p_buf)->src, src);
+    bdcpy(((tBTA_PAN_DATA_PARAMS *)p_buf)->dst, dst);
+    ((tBTA_PAN_DATA_PARAMS *)p_buf)->protocol = protocol;
+    ((tBTA_PAN_DATA_PARAMS *)p_buf)->ext = ext;
+
+    p_buf->layer_specific = handle;
+    p_buf->event = BTA_PAN_CI_RX_WRITEBUF_EVT;
+    bta_sys_sendmsg(p_buf);
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_readbuf
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BT_HDR * bta_pan_ci_readbuf(UINT16 handle, BD_ADDR src, BD_ADDR dst, UINT16* p_protocol,
+                                 BOOLEAN* p_ext, BOOLEAN* p_forward)
+{
+    tBTA_PAN_SCB * p_scb;
+    BT_HDR * p_buf;
+
+    p_scb = bta_pan_scb_by_handle(handle);
+
+    p_buf =  (BT_HDR *)GKI_dequeue(&p_scb->data_queue);
+
+    if(p_buf)
+    {
+        bdcpy(src,((tBTA_PAN_DATA_PARAMS *)p_buf)->src);
+        bdcpy(dst,((tBTA_PAN_DATA_PARAMS *)p_buf)->dst);
+        *p_protocol = ((tBTA_PAN_DATA_PARAMS *)p_buf)->protocol;
+        *p_ext = ((tBTA_PAN_DATA_PARAMS *)p_buf)->ext;
+        *p_forward = ((tBTA_PAN_DATA_PARAMS *)p_buf)->forward;
+    }
+
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_set_mfilters
+**
+** Description      This function is called to set multicast filters
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_set_mfilters(UINT16 handle, UINT16 num_mcast_filters, UINT8 *p_start_array,
+                                                    UINT8 *p_end_array)
+{
+
+    PAN_SetMulticastFilters(handle, num_mcast_filters, p_start_array, p_end_array);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_ci_set_mfilters
+**
+** Description      This function is called to set protocol filters
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_ci_set_pfilters(UINT16 handle, UINT16 num_filters, UINT16 *p_start_array, UINT16 *p_end_array)
+{
+
+    PAN_SetProtocolFilters(handle, num_filters, p_start_array, p_end_array );
+
+}
+
+#endif /* BTA_PAN_API */
diff --git a/bta/pan/bta_pan_int.h b/bta/pan/bta_pan_int.h
new file mode 100644
index 0000000..1667e57
--- /dev/null
+++ b/bta/pan/bta_pan_int.h
@@ -0,0 +1,212 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA data gateway.
+ *
+ ******************************************************************************/
+#ifndef BTA_PAN_INT_H
+#define BTA_PAN_INT_H
+
+#include "bta_sys.h"
+#include "bta_pan_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+
+
+
+/* PAN events */
+enum
+{
+    /* these events are handled by the state machine */
+    BTA_PAN_API_CLOSE_EVT = BTA_SYS_EVT_START(BTA_ID_PAN),
+    BTA_PAN_CI_TX_READY_EVT,
+    BTA_PAN_CI_RX_READY_EVT,
+    BTA_PAN_CI_TX_FLOW_EVT,
+    BTA_PAN_CI_RX_WRITE_EVT,
+    BTA_PAN_CI_RX_WRITEBUF_EVT,
+    BTA_PAN_CONN_OPEN_EVT,
+    BTA_PAN_CONN_CLOSE_EVT,
+    BTA_PAN_BNEP_FLOW_ENABLE_EVT,
+    BTA_PAN_RX_FROM_BNEP_READY_EVT,
+
+    /* these events are handled outside of the state machine */
+    BTA_PAN_API_ENABLE_EVT,
+    BTA_PAN_API_DISABLE_EVT,
+    BTA_PAN_API_SET_ROLE_EVT,
+    BTA_PAN_API_OPEN_EVT
+};
+
+
+
+
+/*****************************************************************************
+**  Data types
+*****************************************************************************/
+
+/* data type for BTA_PAN_API_ENABLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;                        /* Event header */
+    tBTA_PAN_CBACK     *p_cback;                    /* PAN callback function */
+} tBTA_PAN_API_ENABLE;
+
+/* data type for BTA_PAN_API_REG_ROLE_EVT */
+typedef struct
+{
+    BT_HDR              hdr;                             /* Event header */
+    char                user_name[BTA_SERVICE_NAME_LEN+1];   /* Service name */
+    char                gn_name[BTA_SERVICE_NAME_LEN+1];     /* Service name */
+    char                nap_name[BTA_SERVICE_NAME_LEN+1];    /* Service name */
+    tBTA_PAN_ROLE       role;
+    UINT8               user_app_id;
+    UINT8               gn_app_id;
+    UINT8               nap_app_id;
+    tBTA_SEC            user_sec_mask;                   /* Security mask */
+    tBTA_SEC            gn_sec_mask;                     /* Security mask */
+    tBTA_SEC            nap_sec_mask;                    /* Security mask */
+
+
+} tBTA_PAN_API_SET_ROLE;
+
+/* data type for BTA_PAN_API_OPEN_EVT */
+typedef struct
+{
+    BT_HDR              hdr;                        /* Event header */
+    tBTA_PAN_ROLE        local_role;                 /* local role */
+    tBTA_PAN_ROLE        peer_role;                  /* peer role */
+    BD_ADDR             bd_addr;                    /* peer bdaddr */
+} tBTA_PAN_API_OPEN;
+
+/* data type for BTA_PAN_CI_TX_FLOW_EVT */
+typedef struct
+{
+    BT_HDR          hdr;                    /* Event header */
+    BOOLEAN         enable;                 /* Flow control setting */
+} tBTA_PAN_CI_TX_FLOW;
+
+/* data type for BTA_PAN_CONN_OPEN_EVT */
+typedef struct
+{
+    BT_HDR          hdr;        /* Event header */
+    tPAN_RESULT     result;
+
+} tBTA_PAN_CONN;
+
+
+
+
+/* union of all data types */
+typedef union
+{
+    BT_HDR                   hdr;
+    tBTA_PAN_API_ENABLE      api_enable;
+    tBTA_PAN_API_SET_ROLE    api_set_role;
+    tBTA_PAN_API_OPEN        api_open;
+    tBTA_PAN_CI_TX_FLOW      ci_tx_flow;
+    tBTA_PAN_CONN            conn;
+} tBTA_PAN_DATA;
+
+/* state machine control block */
+typedef struct
+{
+    BD_ADDR                 bd_addr;        /* peer bdaddr */
+    BUFFER_Q                data_queue;     /* Queue of buffers waiting to be passed to application */
+    UINT16                  handle;         /* BTA PAN/BNEP handle */
+    BOOLEAN                 in_use;         /* scb in use */
+    tBTA_SEC                sec_mask;       /* Security mask */
+    BOOLEAN                 pan_flow_enable;/* BNEP flow control state */
+    BOOLEAN                 app_flow_enable;/* Application flow control state */
+    UINT8                   state;          /* State machine state */
+    tBTA_PAN_ROLE            local_role;     /* local role */
+    tBTA_PAN_ROLE            peer_role;      /* peer role */
+    UINT8                    app_id;         /* application id for the connection */
+
+} tBTA_PAN_SCB;
+
+
+
+/* main control block */
+typedef struct
+{
+    tBTA_PAN_SCB    scb[BTA_PAN_NUM_CONN];          /* state machine control blocks */
+    tBTA_PAN_CBACK *p_cback;                        /* PAN callback function */
+    UINT8            app_id[3];                      /* application id for PAN roles */
+    UINT8           flow_mask;                      /* Data flow mask */
+    UINT8           q_level;                        /* queue level set by application for TX data */
+
+} tBTA_PAN_CB;
+
+
+/* pan data param */
+typedef struct
+{
+    BT_HDR  hdr;
+    BD_ADDR src;
+    BD_ADDR dst;
+    UINT16  protocol;
+    BOOLEAN ext;
+    BOOLEAN forward;
+
+} tBTA_PAN_DATA_PARAMS;
+
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* PAN control block */
+
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_PAN_CB  bta_pan_cb;
+#else
+extern tBTA_PAN_CB *bta_pan_cb_ptr;
+#define bta_pan_cb (*bta_pan_cb_ptr)
+#endif
+
+/*****************************************************************************
+**  Function prototypes
+*****************************************************************************/
+extern tBTA_PAN_SCB *bta_pan_scb_alloc(void);
+extern void bta_pan_scb_dealloc(tBTA_PAN_SCB *p_scb);
+extern UINT8 bta_pan_scb_to_idx(tBTA_PAN_SCB *p_scb);
+extern tBTA_PAN_SCB *bta_pan_scb_by_handle(UINT16 handle);
+extern BOOLEAN bta_pan_hdl_event(BT_HDR *p_msg);
+
+/* action functions */
+extern void bta_pan_enable(tBTA_PAN_DATA *p_data);
+extern void bta_pan_disable(void);
+extern void bta_pan_set_role(tBTA_PAN_DATA *p_data);
+extern void bta_pan_open(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_api_close(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_set_shutdown(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_rx_path(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_tx_path(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_tx_flow(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_conn_open(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_conn_close(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_writebuf(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_write_buf(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+extern void bta_pan_free_buf(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+
+
+#endif /* BTA_PAN_INT_H */
diff --git a/bta/pan/bta_pan_main.c b/bta/pan/bta_pan_main.c
new file mode 100644
index 0000000..add1c7c
--- /dev/null
+++ b/bta/pan/bta_pan_main.c
@@ -0,0 +1,421 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the PAN main functions and state machine.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_PAN_INCLUDED) && (BTA_PAN_INCLUDED == TRUE)
+
+#include <string.h>
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "gki.h"
+#include "pan_api.h"
+#include "bta_pan_api.h"
+#include "bta_pan_int.h"
+#include "bd.h"
+
+/*****************************************************************************
+** Constants and types
+*****************************************************************************/
+
+
+
+/* state machine action enumeration list */
+enum
+{
+    BTA_PAN_API_CLOSE,
+    BTA_PAN_TX_PATH,
+    BTA_PAN_RX_PATH,
+    BTA_PAN_TX_FLOW,
+    BTA_PAN_WRITE_BUF,
+    BTA_PAN_CONN_OPEN,
+    BTA_PAN_CONN_CLOSE,
+    BTA_PAN_FREE_BUF,
+    BTA_PAN_IGNORE
+};
+
+
+
+/* type for action functions */
+typedef void (*tBTA_PAN_ACTION)(tBTA_PAN_SCB *p_scb, tBTA_PAN_DATA *p_data);
+
+
+
+
+/* action function list */
+const tBTA_PAN_ACTION bta_pan_action[] =
+{
+    bta_pan_api_close,
+    bta_pan_tx_path,
+    bta_pan_rx_path,
+    bta_pan_tx_flow,
+    bta_pan_write_buf,
+    bta_pan_conn_open,
+    bta_pan_conn_close,
+    bta_pan_free_buf,
+
+};
+
+/* state table information */
+#define BTA_PAN_ACTIONS              1       /* number of actions */
+#define BTA_PAN_NEXT_STATE           1       /* position of next state */
+#define BTA_PAN_NUM_COLS             2       /* number of columns in state tables */
+
+
+/* state machine states */
+enum
+{
+    BTA_PAN_IDLE_ST,
+    BTA_PAN_OPEN_ST,
+    BTA_PAN_CLOSING_ST
+};
+
+
+/* state table for listen state */
+const UINT8 bta_pan_st_idle[][BTA_PAN_NUM_COLS] =
+{
+   /* API_CLOSE */          {BTA_PAN_API_CLOSE,              BTA_PAN_IDLE_ST},
+   /* CI_TX_READY */        {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* CI_RX_READY */        {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* CI_TX_FLOW */         {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* CI_RX_WRITE */        {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* CI_RX_WRITEBUF */     {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* PAN_CONN_OPEN */      {BTA_PAN_CONN_OPEN,              BTA_PAN_OPEN_ST},
+   /* PAN_CONN_CLOSE */     {BTA_PAN_CONN_OPEN,              BTA_PAN_IDLE_ST},
+   /* FLOW_ENABLE */        {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST},
+   /* BNEP_DATA */          {BTA_PAN_IGNORE,                 BTA_PAN_IDLE_ST}
+
+};
+
+
+
+/* state table for open state */
+const UINT8 bta_pan_st_open[][BTA_PAN_NUM_COLS] =
+{
+   /* API_CLOSE */          {BTA_PAN_API_CLOSE,               BTA_PAN_OPEN_ST},
+   /* CI_TX_READY */        {BTA_PAN_TX_PATH,                 BTA_PAN_OPEN_ST},
+   /* CI_RX_READY */        {BTA_PAN_RX_PATH,                 BTA_PAN_OPEN_ST},
+   /* CI_TX_FLOW */         {BTA_PAN_TX_FLOW,                 BTA_PAN_OPEN_ST},
+   /* CI_RX_WRITE */        {BTA_PAN_IGNORE,                  BTA_PAN_OPEN_ST},
+   /* CI_RX_WRITEBUF */     {BTA_PAN_WRITE_BUF,               BTA_PAN_OPEN_ST},
+   /* PAN_CONN_OPEN */      {BTA_PAN_IGNORE,                  BTA_PAN_OPEN_ST},
+   /* PAN_CONN_CLOSE */     {BTA_PAN_CONN_CLOSE,              BTA_PAN_IDLE_ST},
+   /* FLOW_ENABLE */        {BTA_PAN_RX_PATH,                 BTA_PAN_OPEN_ST},
+   /* BNEP_DATA */          {BTA_PAN_TX_PATH,                 BTA_PAN_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 bta_pan_st_closing[][BTA_PAN_NUM_COLS] =
+{
+   /* API_CLOSE */          {BTA_PAN_IGNORE,                   BTA_PAN_CLOSING_ST},
+   /* CI_TX_READY */        {BTA_PAN_TX_PATH,                  BTA_PAN_CLOSING_ST},
+   /* CI_RX_READY */        {BTA_PAN_RX_PATH,                  BTA_PAN_CLOSING_ST},
+   /* CI_TX_FLOW */         {BTA_PAN_TX_FLOW,                  BTA_PAN_CLOSING_ST},
+   /* CI_RX_WRITE */        {BTA_PAN_IGNORE,                   BTA_PAN_CLOSING_ST},
+   /* CI_RX_WRITEBUF */     {BTA_PAN_FREE_BUF,                 BTA_PAN_CLOSING_ST},
+   /* PAN_CONN_OPEN */      {BTA_PAN_IGNORE,                   BTA_PAN_CLOSING_ST},
+   /* PAN_CONN_CLOSE */     {BTA_PAN_CONN_CLOSE,               BTA_PAN_IDLE_ST},
+   /* FLOW_ENABLE */        {BTA_PAN_RX_PATH,                  BTA_PAN_CLOSING_ST},
+   /* BNEP_DATA */          {BTA_PAN_TX_PATH,                  BTA_PAN_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tBTA_PAN_ST_TBL)[BTA_PAN_NUM_COLS];
+
+/* state table */
+const tBTA_PAN_ST_TBL bta_pan_st_tbl[] = {
+    bta_pan_st_idle,
+    bta_pan_st_open,
+    bta_pan_st_closing
+};
+
+/*****************************************************************************
+** Global data
+*****************************************************************************/
+
+/* PAN control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_PAN_CB  bta_pan_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         bta_pan_scb_alloc
+**
+** Description      Allocate a PAN server control block.
+**
+**
+** Returns          pointer to the scb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+tBTA_PAN_SCB *bta_pan_scb_alloc(void)
+{
+    tBTA_PAN_SCB     *p_scb = &bta_pan_cb.scb[0];
+    int             i;
+
+    for (i = 0; i < BTA_PAN_NUM_CONN; i++, p_scb++)
+    {
+        if (!p_scb->in_use)
+        {
+            p_scb->in_use = TRUE;
+            APPL_TRACE_DEBUG1("bta_pan_scb_alloc %d", i);
+            break;
+        }
+    }
+
+    if (i == BTA_PAN_NUM_CONN)
+    {
+        /* out of scbs */
+        p_scb = NULL;
+        APPL_TRACE_WARNING0("Out of scbs");
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_sm_execute
+**
+** Description      State machine event handling function for PAN
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_sm_execute(tBTA_PAN_SCB *p_scb, UINT16 event, tBTA_PAN_DATA *p_data)
+{
+    tBTA_PAN_ST_TBL      state_table;
+    UINT8               action;
+    int                 i;
+
+    APPL_TRACE_EVENT3("PAN scb=%d event=0x%x state=%d", bta_pan_scb_to_idx(p_scb), event, p_scb->state);
+
+    /* look up the state table for the current state */
+    state_table = bta_pan_st_tbl[p_scb->state];
+
+    event &= 0x00FF;
+
+    /* set next state */
+    p_scb->state = state_table[event][BTA_PAN_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < BTA_PAN_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != BTA_PAN_IGNORE)
+        {
+            (*bta_pan_action[action])(p_scb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_api_enable
+**
+** Description      Handle an API enable event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_api_enable(tBTA_PAN_DATA *p_data)
+{
+    /* initialize control block */
+    memset(&bta_pan_cb, 0, sizeof(bta_pan_cb));
+
+    /* store callback function */
+    bta_pan_cb.p_cback = p_data->api_enable.p_cback;
+    bta_pan_enable(p_data);
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_api_disable
+**
+** Description      Handle an API disable event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_api_disable(tBTA_PAN_DATA *p_data)
+{
+    bta_pan_disable();
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_api_open
+**
+** Description      Handle an API listen event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bta_pan_api_open(tBTA_PAN_DATA *p_data)
+{
+    tBTA_PAN_SCB     *p_scb;
+    tBTA_PAN_OPEN data;
+
+    /* allocate an scb */
+    if ((p_scb = bta_pan_scb_alloc()) != NULL)
+    {
+        bta_pan_open(p_scb, p_data);
+    }
+    else
+    {
+        bdcpy(data.bd_addr, p_data->api_open.bd_addr);
+        data.status = BTA_PAN_FAIL;
+        bta_pan_cb.p_cback(BTA_PAN_OPEN_EVT, (tBTA_PAN *)&data);
+
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_pan_scb_dealloc
+**
+** Description      Deallocate a link control block.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_scb_dealloc(tBTA_PAN_SCB *p_scb)
+{
+    APPL_TRACE_DEBUG1("bta_pan_scb_dealloc %d", bta_pan_scb_to_idx(p_scb));
+    memset(p_scb, 0, sizeof(tBTA_PAN_SCB));
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_scb_to_idx
+**
+** Description      Given a pointer to an scb, return its index.
+**
+**
+** Returns          Index of scb.
+**
+*******************************************************************************/
+UINT8 bta_pan_scb_to_idx(tBTA_PAN_SCB *p_scb)
+{
+
+    return ((UINT8) (p_scb - bta_pan_cb.scb)) + 1;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_scb_by_handle
+**
+** Description      Find scb associated with handle.
+**
+**
+** Returns          Pointer to scb or NULL if not found.
+**
+*******************************************************************************/
+tBTA_PAN_SCB *bta_pan_scb_by_handle(UINT16 handle)
+{
+    tBTA_PAN_SCB     *p_scb = &bta_pan_cb.scb[0];
+    UINT8 i;
+
+    for (i = 0; i < BTA_PAN_NUM_CONN; i++, p_scb++)
+    {
+        if (p_scb->handle == handle)
+        {
+            return p_scb;;
+        }
+    }
+
+
+    APPL_TRACE_WARNING1("No scb for handle %d", handle);
+
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_hdl_event
+**
+** Description      Data gateway main event handling function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_pan_hdl_event(BT_HDR *p_msg)
+{
+    tBTA_PAN_SCB *p_scb;
+    BOOLEAN     freebuf = TRUE;
+
+    switch (p_msg->event)
+    {
+        /* handle enable event */
+        case BTA_PAN_API_ENABLE_EVT:
+            bta_pan_api_enable((tBTA_PAN_DATA *) p_msg);
+            break;
+
+        /* handle disable event */
+        case BTA_PAN_API_DISABLE_EVT:
+            bta_pan_api_disable((tBTA_PAN_DATA *) p_msg);
+            break;
+
+        /* handle set role event */
+        case BTA_PAN_API_SET_ROLE_EVT:
+            bta_pan_set_role((tBTA_PAN_DATA *) p_msg);
+            break;
+
+        /* handle open event */
+        case BTA_PAN_API_OPEN_EVT:
+            bta_pan_api_open((tBTA_PAN_DATA *) p_msg);
+            break;
+
+
+        /* events that require buffer not be released */
+        case BTA_PAN_CI_RX_WRITEBUF_EVT:
+            freebuf = FALSE;
+            if ((p_scb = bta_pan_scb_by_handle(p_msg->layer_specific)) != NULL)
+            {
+                bta_pan_sm_execute(p_scb, p_msg->event, (tBTA_PAN_DATA *) p_msg);
+            }
+            break;
+
+        /* all other events */
+        default:
+            if ((p_scb = bta_pan_scb_by_handle(p_msg->layer_specific)) != NULL)
+            {
+                bta_pan_sm_execute(p_scb, p_msg->event, (tBTA_PAN_DATA *) p_msg);
+            }
+            break;
+
+    }
+    return freebuf;
+}
+#endif /* BTA_PAN_INCLUDED */
diff --git a/bta/pb/bta_pbs_cfg.c b/bta/pb/bta_pbs_cfg.c
new file mode 100644
index 0000000..b2782fb
--- /dev/null
+++ b/bta/pb/bta_pbs_cfg.c
@@ -0,0 +1,51 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the BTA Phone
+ *  Book Access Server.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if defined(BTA_PBS_INCLUDED) && (BTA_PBS_INCLUDED == TRUE)
+
+#include "bta_pbs_int.h"
+
+/* Realm Character Set */
+#ifndef BTA_PBS_REALM_CHARSET
+#define BTA_PBS_REALM_CHARSET   0       /* ASCII */
+#endif
+
+/* Specifies whether or not client's user id is required during obex authentication */
+#ifndef BTA_PBS_USERID_REQ
+#define BTA_PBS_USERID_REQ      FALSE
+#endif
+
+const tBTA_PBS_CFG bta_pbs_cfg =
+{
+    BTA_PBS_REALM_CHARSET,      /* Server only */
+    BTA_PBS_USERID_REQ,         /* Server only */
+    (BTA_PBS_SUPF_DOWNLOAD | BTA_PBS_SURF_BROWSE),
+    BTA_PBS_REPOSIT_LOCAL,
+};
+
+tBTA_PBS_CFG *p_bta_pbs_cfg = (tBTA_PBS_CFG *)&bta_pbs_cfg;
+#endif /* BTA_PBS_INCLUDED */
diff --git a/bta/pb/bta_pbs_int.h b/bta/pb/bta_pbs_int.h
new file mode 100644
index 0000000..a4fce2b
--- /dev/null
+++ b/bta/pb/bta_pbs_int.h
@@ -0,0 +1,57 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private file for the phone book access server (PBS).
+ *
+ ******************************************************************************/
+#ifndef BTA_PBS_INT_H
+#define BTA_PBS_INT_H
+
+#include "bt_target.h"
+#include "bta_pbs_api.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+#define BTA_PBS_TARGET_UUID "\x79\x61\x35\xf0\xf0\xc5\x11\xd8\x09\x66\x08\x00\x20\x0c\x9a\x66"
+#define BTA_PBS_UUID_LENGTH                 16
+#define BTA_PBS_MAX_AUTH_KEY_SIZE           16  /* Must not be greater than OBX_MAX_AUTH_KEY_SIZE */
+
+#define BTA_PBS_DEFAULT_VERSION             0x0101  /* for PBAP PSE version 1.1 */
+
+
+/* Configuration structure */
+typedef struct
+{
+    UINT8       realm_charset;          /* Server only */
+    BOOLEAN     userid_req;             /* TRUE if user id is required during obex authentication (Server only) */
+    UINT8       supported_features;     /* Server supported features */
+    UINT8       supported_repositories; /* Server supported repositories */
+
+} tBTA_PBS_CFG;
+
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+
+#endif /* BTA_PBS_INT_H */
diff --git a/bta/sys/bd.c b/bta/sys/bd.c
new file mode 100644
index 0000000..052f9b9
--- /dev/null
+++ b/bta/sys/bd.c
@@ -0,0 +1,112 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  BD address services.
+ *
+ ******************************************************************************/
+
+#include "data_types.h"
+#include "bd.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* global constant for "any" bd addr */
+const BD_ADDR bd_addr_any = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+const BD_ADDR bd_addr_null= {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+/*****************************************************************************
+**  Functions
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bdcpy
+**
+** Description      Copy bd addr b to a.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bdcpy(BD_ADDR a, const BD_ADDR b)
+{
+    int i;
+
+    for (i = BD_ADDR_LEN; i != 0; i--)
+    {
+        *a++ = *b++;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bdcmp
+**
+** Description      Compare bd addr b to a.
+**
+**
+** Returns          Zero if b==a, nonzero otherwise (like memcmp).
+**
+*******************************************************************************/
+int bdcmp(const BD_ADDR a, const BD_ADDR b)
+{
+    int i;
+
+    for (i = BD_ADDR_LEN; i != 0; i--)
+    {
+        if (*a++ != *b++)
+        {
+            return -1;
+        }
+    }
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         bdcmpany
+**
+** Description      Compare bd addr to "any" bd addr.
+**
+**
+** Returns          Zero if a equals bd_addr_any.
+**
+*******************************************************************************/
+int bdcmpany(const BD_ADDR a)
+{
+    return bdcmp(a, bd_addr_any);
+}
+
+/*******************************************************************************
+**
+** Function         bdsetany
+**
+** Description      Set bd addr to "any" bd addr.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bdsetany(BD_ADDR a)
+{
+    bdcpy(a, bd_addr_any);
+}
diff --git a/bta/sys/bta_sys.h b/bta/sys/bta_sys.h
new file mode 100644
index 0000000..5d724e5
--- /dev/null
+++ b/bta/sys/bta_sys.h
@@ -0,0 +1,308 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the public interface file for the BTA system manager.
+ *
+ ******************************************************************************/
+#ifndef BTA_SYS_H
+#define BTA_SYS_H
+
+#include "bt_target.h"
+#include "gki.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/* event handler function type */
+typedef BOOLEAN (tBTA_SYS_EVT_HDLR)(BT_HDR *p_msg);
+
+/* disable function type */
+typedef void (tBTA_SYS_DISABLE)(void);
+
+
+/* HW modules */
+enum
+{
+    BTA_SYS_HW_BLUETOOTH,
+    BTA_SYS_HW_FMRX,
+    BTA_SYS_HW_FMTX,
+    BTA_SYS_HW_GPS,
+    BTA_SYS_HW_SENSOR,
+    BTA_SYS_HW_NFC,
+    BTA_SYS_HW_RT,
+
+    BTA_SYS_MAX_HW_MODULES
+};
+
+typedef UINT16 tBTA_SYS_HW_MODULE;
+
+#ifndef BTA_DM_NUM_JV_ID
+#define BTA_DM_NUM_JV_ID    2
+#endif
+
+/* SW sub-systems */
+#define BTA_ID_SYS          0            /* system manager */
+/* BLUETOOTH PART - from 0 to BTA_ID_BLUETOOTH_MAX */
+#define BTA_ID_DM           1            /* device manager */
+#define BTA_ID_DM_SEARCH    2            /* device manager search */
+#define BTA_ID_DM_SEC       3            /* device manager security */
+#define BTA_ID_DG           4            /* data gateway */
+#define BTA_ID_AG           5            /* audio gateway */
+#define BTA_ID_OPC          6            /* object push client */
+#define BTA_ID_OPS          7            /* object push server */
+#define BTA_ID_FTS          8            /* file transfer server */
+#define BTA_ID_CT           9            /* cordless telephony terminal */
+#define BTA_ID_FTC          10           /* file transfer client */
+#define BTA_ID_SS           11           /* synchronization server */
+#define BTA_ID_PR           12           /* Printer client */
+#define BTA_ID_BIC          13           /* Basic Imaging Client */
+#define BTA_ID_PAN          14           /* Personal Area Networking */
+#define BTA_ID_BIS          15           /* Basic Imaging Server */
+#define BTA_ID_ACC          16           /* Advanced Camera Client */
+#define BTA_ID_SC           17           /* SIM Card Access server */
+#define BTA_ID_AV           18           /* Advanced audio/video */
+#define BTA_ID_AVK          19           /* Audio/video sink */
+#define BTA_ID_HD           20           /* HID Device */
+#define BTA_ID_CG           21           /* Cordless Gateway */
+#define BTA_ID_BP           22           /* Basic Printing Client */
+#define BTA_ID_HH           23           /* Human Interface Device Host */
+#define BTA_ID_PBS          24           /* Phone Book Access Server */
+#define BTA_ID_PBC          25           /* Phone Book Access Client */
+#define BTA_ID_JV           26           /* Java */
+#define BTA_ID_HS           27           /* Headset */
+#define BTA_ID_MSE          28           /* Message Server Equipment */
+#define BTA_ID_MCE          29           /* Message Client Equipment */
+#define BTA_ID_HL           30           /* Health Device Profile*/
+#define BTA_ID_GATTC        31           /* GATT Client */
+#define BTA_ID_GATTS        32           /* GATT Client */
+#define BTA_ID_BLUETOOTH_MAX   33        /* last BT profile */
+
+/* FM */
+#define BTA_ID_FM           34           /* FM  */
+#define BTA_ID_FMTX         35           /* FM TX */
+
+/* SENSOR */
+#define BTA_ID_SSR          36           /* Sensor  */
+
+/* GPS */
+#define BTA_ID_GPS          37           /* GPS  */
+
+/* GENERIC */
+#define BTA_ID_PRM          38
+#define BTA_ID_SYSTEM       39           /* platform-specific */
+#define BTA_ID_SWRAP        40           /* Insight script wrapper */
+#define BTA_ID_MIP          41           /* Multicase Individual Polling */
+#define BTA_ID_RT           42           /* Audio Routing module: This module is always on. */
+
+
+/* JV */
+#define BTA_ID_JV1          43           /* JV1 */
+#define BTA_ID_JV2          44           /* JV2 */
+
+#define BTA_ID_MAX          (43 + BTA_DM_NUM_JV_ID)
+
+typedef UINT8 tBTA_SYS_ID;
+
+
+#define BTA_SYS_CONN_OPEN           0x00
+#define BTA_SYS_CONN_CLOSE          0x01
+#define BTA_SYS_APP_OPEN            0x02
+#define BTA_SYS_APP_CLOSE           0x03
+#define BTA_SYS_SCO_OPEN            0x04
+#define BTA_SYS_SCO_CLOSE           0x05
+#define BTA_SYS_CONN_IDLE           0x06
+#define BTA_SYS_CONN_BUSY           0x07
+
+/* for link policy */
+#define BTA_SYS_PLCY_SET            0x10 /* set the link policy to the given addr */
+#define BTA_SYS_PLCY_CLR            0x11 /* clear the link policy to the given addr */
+#define BTA_SYS_PLCY_DEF_SET        0x12 /* set the default link policy */
+#define BTA_SYS_PLCY_DEF_CLR        0x13 /* clear the default link policy */
+#define BTA_SYS_ROLE_CHANGE         0x14 /* role change */
+
+typedef UINT8 tBTA_SYS_CONN_STATUS;
+
+/* Bitmask of sys features */
+#define BTA_SYS_FEAT_PCM2           0x0001
+#define BTA_SYS_FEAT_PCM2_MASTER    0x0002
+
+/* tBTA_PREF_ROLES */
+typedef UINT8 tBTA_SYS_PREF_ROLES;
+
+/* conn callback for role / low power manager*/
+typedef void (tBTA_SYS_CONN_CBACK)(tBTA_SYS_CONN_STATUS status,UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+
+/* conn callback for role / low power manager*/
+typedef void (tBTA_SYS_SSR_CFG_CBACK)(UINT8 id, UINT8 app_id, UINT16 latency, UINT16 tout);
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+/* eir callback for adding/removeing UUID */
+typedef void (tBTA_SYS_EIR_CBACK)(UINT16 uuid16, BOOLEAN adding);
+#endif
+
+/* registration structure */
+typedef struct
+{
+    tBTA_SYS_EVT_HDLR   *evt_hdlr;
+    tBTA_SYS_DISABLE    *disable;
+} tBTA_SYS_REG;
+
+/* system manager configuration structure */
+typedef struct
+{
+    UINT16          mbox_evt;                       /* GKI mailbox event */
+    UINT8           mbox;                           /* GKI mailbox id */
+    UINT8           timer;                          /* GKI timer id */
+    UINT8           trace_level;                    /* initial trace level */
+} tBTA_SYS_CFG;
+
+/* data type to send events to BTA SYS HW manager */
+typedef struct
+{
+    BT_HDR                hdr;
+    tBTA_SYS_HW_MODULE   hw_module;
+} tBTA_SYS_HW_MSG;
+
+
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+/* trace level */
+extern UINT8 appl_trace_level;
+
+/*****************************************************************************
+**  Macros
+*****************************************************************************/
+
+/* Calculate start of event enumeration; id is top 8 bits of event */
+#define BTA_SYS_EVT_START(id)       ((id) << 8)
+
+/*****************************************************************************
+**  events for BTA SYS HW manager
+*****************************************************************************/
+
+/* events sent to SYS HW manager - must be kept synchronized with tables in bta_sys_main.c */
+enum
+{
+    /* device manager local device API events */
+    BTA_SYS_API_ENABLE_EVT = BTA_SYS_EVT_START(BTA_ID_SYS),
+    BTA_SYS_EVT_ENABLED_EVT,
+    BTA_SYS_EVT_STACK_ENABLED_EVT,
+    BTA_SYS_API_DISABLE_EVT,
+    BTA_SYS_EVT_DISABLED_EVT,
+    BTA_SYS_ERROR_EVT,
+
+    BTA_SYS_MAX_EVT
+};
+
+
+
+/* SYS HW status events - returned by SYS HW manager to other modules. */
+enum
+{
+    BTA_SYS_HW_OFF_EVT,
+    BTA_SYS_HW_ON_EVT,
+    BTA_SYS_HW_STARTING_EVT,
+    BTA_SYS_HW_STOPPING_EVT,
+    BTA_SYS_HW_ERROR_EVT
+
+};
+typedef UINT8 tBTA_SYS_HW_EVT;
+
+/* HW enable callback type */
+typedef void (tBTA_SYS_HW_CBACK)(tBTA_SYS_HW_EVT status);
+
+/*****************************************************************************
+**  Function declarations
+*****************************************************************************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+BTA_API extern void bta_sys_init(void);
+BTA_API extern void bta_sys_event(BT_HDR *p_msg);
+BTA_API extern void bta_sys_timer_update(void);
+BTA_API extern void bta_sys_disable_timers(void);
+BTA_API extern void bta_sys_set_trace_level(UINT8 level);
+extern void bta_sys_register(UINT8 id, const tBTA_SYS_REG *p_reg);
+extern void bta_sys_deregister(UINT8 id);
+extern BOOLEAN bta_sys_is_register(UINT8 id);
+extern UINT16 bta_sys_get_sys_features(void);
+extern void bta_sys_sendmsg(void *p_msg);
+extern void bta_sys_start_timer(TIMER_LIST_ENT *p_tle, UINT16 type, INT32 timeout);
+extern void bta_sys_stop_timer(TIMER_LIST_ENT *p_tle);
+extern void bta_sys_disable(tBTA_SYS_HW_MODULE module);
+
+extern void bta_sys_hw_register( tBTA_SYS_HW_MODULE module, tBTA_SYS_HW_CBACK *cback);
+extern void bta_sys_hw_unregister( tBTA_SYS_HW_MODULE module );
+
+
+extern void bta_sys_rm_register(tBTA_SYS_CONN_CBACK * p_cback);
+extern void bta_sys_pm_register(tBTA_SYS_CONN_CBACK * p_cback);
+
+extern void bta_sys_policy_register(tBTA_SYS_CONN_CBACK * p_cback);
+extern void bta_sys_sco_register(tBTA_SYS_CONN_CBACK * p_cback);
+
+
+extern void bta_sys_conn_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_conn_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_app_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_app_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_sco_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_sco_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_sco_use(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_sco_unuse(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_idle(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+extern void bta_sys_busy(UINT8 id, UINT8 app_id, BD_ADDR peer_addr);
+
+#if (BTM_SSR_INCLUDED == TRUE)
+extern void bta_sys_ssr_cfg_register(tBTA_SYS_SSR_CFG_CBACK * p_cback);
+extern void bta_sys_chg_ssr_config (UINT8 id, UINT8 app_id, UINT16 max_latency, UINT16 min_tout);
+#endif
+
+extern void bta_sys_role_chg_register(tBTA_SYS_CONN_CBACK * p_cback);
+extern void bta_sys_notify_role_chg(BD_ADDR_PTR p_bda, UINT8 new_role, UINT8 hci_status);
+extern void bta_sys_collision_register(UINT8 bta_id, tBTA_SYS_CONN_CBACK *p_cback);
+extern void bta_sys_notify_collision (BD_ADDR_PTR p_bda);
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+extern void bta_sys_eir_register(tBTA_SYS_EIR_CBACK * p_cback);
+extern void bta_sys_add_uuid(UINT16 uuid16);
+extern void bta_sys_remove_uuid(UINT16 uuid16);
+#else
+#define bta_sys_eir_register(ut)
+#define bta_sys_add_uuid(ut)
+#define bta_sys_remove_uuid(ut)
+#endif
+
+extern void bta_sys_set_policy (UINT8 id, UINT8 policy, BD_ADDR peer_addr);
+extern void bta_sys_clear_policy (UINT8 id, UINT8 policy, BD_ADDR peer_addr);
+extern void bta_sys_set_default_policy (UINT8 id, UINT8 policy);
+extern void bta_sys_clear_default_policy (UINT8 id, UINT8 policy);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTA_SYS_H */
diff --git a/bta/sys/bta_sys_cfg.c b/bta/sys/bta_sys_cfg.c
new file mode 100644
index 0000000..bcc7e40
--- /dev/null
+++ b/bta/sys/bta_sys_cfg.c
@@ -0,0 +1,55 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains compile-time configurable constants for the BTA
+ *  system manager.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+#include "bta_sys.h"
+
+/* GKI task mailbox event for BTA. */
+#ifndef BTA_MBOX_EVT
+#define BTA_MBOX_EVT                TASK_MBOX_2_EVT_MASK
+#endif
+
+/* GKI task mailbox for BTA. */
+#ifndef BTA_MBOX
+#define BTA_MBOX                    TASK_MBOX_2
+#endif
+
+/* GKI timer id used for protocol timer for BTA. */
+#ifndef BTA_TIMER
+#define BTA_TIMER                   TIMER_1
+#endif
+
+const tBTA_SYS_CFG bta_sys_cfg =
+{
+    BTA_MBOX_EVT,               /* GKI mailbox event */
+    BTA_MBOX,                   /* GKI mailbox id */
+    BTA_TIMER,                  /* GKI timer id */
+    APPL_INITIAL_TRACE_LEVEL    /* initial trace level */
+};
+
+tBTA_SYS_CFG *p_bta_sys_cfg = (tBTA_SYS_CFG *)&bta_sys_cfg;
+
+
diff --git a/bta/sys/bta_sys_ci.c b/bta/sys/bta_sys_ci.c
new file mode 100644
index 0000000..d191077
--- /dev/null
+++ b/bta/sys/bta_sys_ci.c
@@ -0,0 +1,77 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2010-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for BTA system call-in functions.
+ *
+ ******************************************************************************/
+
+#include "bta_sys.h"
+#include "bta_sys_ci.h"
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_ci_enabled
+**
+** Description      This function must be called in response to function
+**                  bta_sys_hw_enable_co(), when HW is indeed enabled
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+  void bta_sys_hw_ci_enabled(tBTA_SYS_HW_MODULE module )
+
+{
+    tBTA_SYS_HW_MSG *p_msg;
+
+    if ((p_msg = (tBTA_SYS_HW_MSG *) GKI_getbuf(sizeof(tBTA_SYS_HW_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_SYS_EVT_ENABLED_EVT;
+        p_msg->hw_module = module;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_ci_disabled
+**
+** Description      This function must be called in response to function
+**                  bta_sys_hw_disable_co() when HW is really OFF
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_hw_ci_disabled( tBTA_SYS_HW_MODULE module  )
+{
+    tBTA_SYS_HW_MSG *p_msg;
+
+    if ((p_msg = (tBTA_SYS_HW_MSG *) GKI_getbuf(sizeof(tBTA_SYS_HW_MSG))) != NULL)
+    {
+        p_msg->hdr.event = BTA_SYS_EVT_DISABLED_EVT;
+        p_msg->hw_module = module;
+
+        bta_sys_sendmsg(p_msg);
+    }
+}
+
diff --git a/bta/sys/bta_sys_conn.c b/bta/sys/bta_sys_conn.c
new file mode 100644
index 0000000..b495085
--- /dev/null
+++ b/bta/sys/bta_sys_conn.c
@@ -0,0 +1,577 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Routes connection status callbacks from various sub systems to DM
+ *
+ ******************************************************************************/
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_sys_int.h"
+#include "gki.h"
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_rm_register
+**
+** Description      Called by BTA DM to register role management callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_rm_register(tBTA_SYS_CONN_CBACK * p_cback)
+{
+    bta_sys_cb.prm_cb = p_cback;
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_policy_register
+**
+** Description      Called by BTA DM to register link policy change callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_policy_register(tBTA_SYS_CONN_CBACK * p_cback)
+{
+    bta_sys_cb.p_policy_cb = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_role_chg_register
+**
+** Description      Called by BTA AV to register role change callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_role_chg_register(tBTA_SYS_CONN_CBACK * p_cback)
+{
+    bta_sys_cb.p_role_cb = p_cback;
+}
+/*******************************************************************************
+**
+** Function         bta_sys_ssr_cfg_register
+**
+** Description      Called by BTA DM to register SSR configuration callback
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_SSR_INCLUDED == TRUE)
+void bta_sys_ssr_cfg_register(tBTA_SYS_SSR_CFG_CBACK * p_cback)
+{
+    bta_sys_cb.p_ssr_cb = p_cback;
+}
+#endif
+/*******************************************************************************
+**
+** Function         bta_sys_role_chg_register
+**
+** Description      Called by BTA AV to register role change callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_notify_role_chg(BD_ADDR_PTR p_bda, UINT8 new_role, UINT8 hci_status)
+{
+    if (bta_sys_cb.p_role_cb)
+    {
+        bta_sys_cb.p_role_cb(BTA_SYS_ROLE_CHANGE, new_role, hci_status, p_bda);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_collision_register
+**
+** Description      Called by any BTA module to register for collision event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_collision_register(UINT8 bta_id, tBTA_SYS_CONN_CBACK *p_cback)
+{
+    UINT8 index;
+
+    for (index = 0; index < MAX_COLLISION_REG; index++)
+    {
+        if ((bta_sys_cb.colli_reg.id[index] == bta_id) ||
+            (bta_sys_cb.colli_reg.id[index] == 0))
+        {
+            bta_sys_cb.colli_reg.id[index] = bta_id;
+            bta_sys_cb.colli_reg.p_coll_cback[index] = p_cback;
+            return;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_notify_collision
+**
+** Description      Called by BTA DM to notify collision event.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_notify_collision (BD_ADDR_PTR p_bda)
+{
+    UINT8 index;
+
+    for (index = 0; index < MAX_COLLISION_REG; index++)
+    {
+        if ((bta_sys_cb.colli_reg.id[index] != 0) &&
+            (bta_sys_cb.colli_reg.p_coll_cback[index] != NULL))
+        {
+            bta_sys_cb.colli_reg.p_coll_cback[index] (0, BTA_ID_SYS, 0, p_bda);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_sco_register
+**
+** Description      Called by BTA AV to register sco connection change callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sco_register(tBTA_SYS_CONN_CBACK * p_cback)
+{
+    bta_sys_cb.p_sco_cb = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_pm_register
+**
+** Description      Called by BTA DM to register power management callbacks
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_pm_register(tBTA_SYS_CONN_CBACK * p_cback)
+{
+    bta_sys_cb.ppm_cb = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_conn_open
+**
+** Description      Called by BTA subsystems when a connection is made to
+**                  the service
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_conn_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.prm_cb)
+    {
+
+        bta_sys_cb.prm_cb(BTA_SYS_CONN_OPEN, id, app_id, peer_addr);
+
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+
+        bta_sys_cb.ppm_cb(BTA_SYS_CONN_OPEN, id, app_id, peer_addr);
+
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_conn_close
+**
+** Description      Called by BTA subsystems when a connection to the service
+**                  is closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_conn_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.prm_cb)
+    {
+
+        bta_sys_cb.prm_cb(BTA_SYS_CONN_CLOSE, id, app_id, peer_addr);
+
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+
+        bta_sys_cb.ppm_cb(BTA_SYS_CONN_CLOSE, id, app_id, peer_addr);
+
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_app_open
+**
+** Description      Called by BTA subsystems when application initiates connection
+**                  to a peer device
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_app_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.ppm_cb)
+    {
+        bta_sys_cb.ppm_cb(BTA_SYS_APP_OPEN, id, app_id, peer_addr);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_app_close
+**
+** Description      Called by BTA subsystems when application initiates close
+**                  of connection to peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_app_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.ppm_cb)
+    {
+        bta_sys_cb.ppm_cb(BTA_SYS_APP_CLOSE, id, app_id, peer_addr);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_sco_open
+**
+** Description      Called by BTA subsystems when sco connection for that service
+**                  is open
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sco_open(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    /* AG triggers p_sco_cb by bta_sys_sco_use. */
+    if((id != BTA_ID_AG) && (bta_sys_cb.p_sco_cb))
+    {
+        /* without querying BTM_GetNumScoLinks() */
+        bta_sys_cb.p_sco_cb(BTA_SYS_SCO_OPEN, 1, app_id, peer_addr);
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+        bta_sys_cb.ppm_cb(BTA_SYS_SCO_OPEN, id, app_id, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_sco_close
+**
+** Description      Called by BTA subsystems when sco connection for that service
+**                  is closed
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sco_close(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    UINT8 num_sco_links;
+
+    if((id != BTA_ID_AG) && (bta_sys_cb.p_sco_cb))
+    {
+        num_sco_links = BTM_GetNumScoLinks();
+        bta_sys_cb.p_sco_cb(BTA_SYS_SCO_CLOSE, num_sco_links, app_id, peer_addr);
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+        bta_sys_cb.ppm_cb(BTA_SYS_SCO_CLOSE, id, app_id, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_sco_use
+**
+** Description      Called by BTA subsystems when that service needs to use sco.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sco_use(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    /* AV streaming need to be suspended before SCO is connected. */
+    if(bta_sys_cb.p_sco_cb)
+    {
+        /* without querying BTM_GetNumScoLinks() */
+        bta_sys_cb.p_sco_cb(BTA_SYS_SCO_OPEN, 1, app_id, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_sco_unuse
+**
+** Description      Called by BTA subsystems when sco connection for that service
+**                  is no longer needed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sco_unuse(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    UINT8 num_sco_links;
+
+    if((bta_sys_cb.p_sco_cb))
+    {
+        num_sco_links = BTM_GetNumScoLinks();
+        bta_sys_cb.p_sco_cb(BTA_SYS_SCO_CLOSE, num_sco_links, app_id, peer_addr);
+    }
+}
+/*******************************************************************************
+**
+** Function         bta_sys_chg_ssr_config
+**
+** Description      Called by BTA subsystems to indicate that the given app SSR setting
+**                  need to be changed.
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_SSR_INCLUDED == TRUE)
+void bta_sys_chg_ssr_config (UINT8 id, UINT8 app_id, UINT16 max_latency, UINT16 min_tout)
+{
+    if(bta_sys_cb.p_ssr_cb)
+    {
+        bta_sys_cb.p_ssr_cb(id, app_id, max_latency, min_tout);
+    }
+}
+#endif
+/*******************************************************************************
+**
+** Function         bta_sys_set_policy
+**
+** Description      Called by BTA subsystems to indicate that the given link
+**                  policy to peer device should be set
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_set_policy (UINT8 id, UINT8 policy, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.p_policy_cb)
+    {
+        bta_sys_cb.p_policy_cb(BTA_SYS_PLCY_SET, id, policy, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_clear_policy
+**
+** Description      Called by BTA subsystems to indicate that the given link
+**                  policy to peer device should be clear
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_clear_policy (UINT8 id, UINT8 policy, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.p_policy_cb)
+    {
+        bta_sys_cb.p_policy_cb(BTA_SYS_PLCY_CLR, id, policy, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_set_default_policy
+**
+** Description      Called by BTA subsystems to indicate that the given default
+**                  link policy should be set
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_set_default_policy (UINT8 id, UINT8 policy)
+{
+    if(bta_sys_cb.p_policy_cb)
+    {
+        bta_sys_cb.p_policy_cb(BTA_SYS_PLCY_DEF_SET, id, policy, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_clear_default_policy
+**
+** Description      Called by BTA subsystems to indicate that the given default
+**                  link policy should be clear
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_clear_default_policy (UINT8 id, UINT8 policy)
+{
+    if(bta_sys_cb.p_policy_cb)
+    {
+        bta_sys_cb.p_policy_cb(BTA_SYS_PLCY_DEF_CLR, id, policy, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_idle
+**
+** Description      Called by BTA subsystems to indicate that the connection to
+**                  peer device is idle
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_idle(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+
+    if(bta_sys_cb.prm_cb)
+    {
+
+        bta_sys_cb.prm_cb(BTA_SYS_CONN_IDLE, id, app_id, peer_addr);
+
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+
+        bta_sys_cb.ppm_cb(BTA_SYS_CONN_IDLE, id, app_id, peer_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_busy
+**
+** Description      Called by BTA subsystems to indicate that the connection to
+**                  peer device is busy
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_busy(UINT8 id, UINT8 app_id, BD_ADDR peer_addr)
+{
+    if(bta_sys_cb.prm_cb)
+    {
+
+        bta_sys_cb.prm_cb(BTA_SYS_CONN_BUSY, id, app_id, peer_addr);
+
+    }
+
+    if(bta_sys_cb.ppm_cb)
+    {
+
+        bta_sys_cb.ppm_cb(BTA_SYS_CONN_BUSY, id, app_id, peer_addr);
+
+    }
+}
+
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+/*******************************************************************************
+**
+** Function         bta_sys_eir_register
+**
+** Description      Called by BTA DM to register EIR utility function that can be
+**                  used by the other BTA modules to add/remove UUID.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_eir_register(tBTA_SYS_EIR_CBACK * p_cback)
+{
+    bta_sys_cb.eir_cb = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_add_uuid
+**
+** Description      Called by BTA subsystems to indicate to DM that new service
+**                  class UUID is added.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_add_uuid(UINT16 uuid16)
+{
+    if(bta_sys_cb.eir_cb)
+    {
+        bta_sys_cb.eir_cb(uuid16, TRUE );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_remove_uuid
+**
+** Description      Called by BTA subsystems to indicate to DM that the service
+**                  class UUID is removed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_remove_uuid(UINT16 uuid16)
+{
+    if(bta_sys_cb.eir_cb)
+    {
+        bta_sys_cb.eir_cb(uuid16, FALSE);
+    }
+}
+#endif
+
diff --git a/bta/sys/bta_sys_int.h b/bta/sys/bta_sys_int.h
new file mode 100644
index 0000000..d187b29
--- /dev/null
+++ b/bta/sys/bta_sys_int.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the private interface file for the BTA system manager.
+ *
+ ******************************************************************************/
+#ifndef BTA_SYS_INT_H
+#define BTA_SYS_INT_H
+
+#include "ptim.h"
+
+/*****************************************************************************
+**  Constants and data types
+*****************************************************************************/
+
+/*****************************************************************************
+**  state table
+*****************************************************************************/
+
+/* SYS HW state */
+enum
+{
+    BTA_SYS_HW_OFF,
+    BTA_SYS_HW_STARTING,
+    BTA_SYS_HW_ON,
+    BTA_SYS_HW_STOPPING
+};
+typedef UINT8 tBTA_SYS_HW_STATE;
+
+/* Collision callback */
+#define MAX_COLLISION_REG   5
+
+typedef struct
+{
+    UINT8                   id[MAX_COLLISION_REG];
+    tBTA_SYS_CONN_CBACK     *p_coll_cback[MAX_COLLISION_REG];
+} tBTA_SYS_COLLISION;
+
+/* system manager control block */
+typedef struct
+{
+    tBTA_SYS_REG            *reg[BTA_ID_MAX];       /* registration structures */
+    BOOLEAN                 is_reg[BTA_ID_MAX];     /* registration structures */
+    tPTIM_CB                ptim_cb;                /* protocol timer list */
+    BOOLEAN                 timers_disabled;        /* TRUE if sys timers disabled */
+    UINT8                   task_id;                /* GKI task id */
+    tBTA_SYS_HW_STATE state;
+    tBTA_SYS_HW_CBACK *sys_hw_cback[BTA_SYS_MAX_HW_MODULES];    /* enable callback for each HW modules */
+    UINT32                  sys_hw_module_active;   /* bitmask of all active modules */
+    UINT16                  sys_features;           /* Bitmask of sys features */
+
+    tBTA_SYS_CONN_CBACK     *prm_cb;                 /* role management callback registered by DM */
+    tBTA_SYS_CONN_CBACK     *ppm_cb;                 /* low power management callback registered by DM */
+    tBTA_SYS_CONN_CBACK     *p_policy_cb;            /* link policy change callback registered by DM */
+    tBTA_SYS_CONN_CBACK     *p_sco_cb;               /* SCO connection change callback registered by AV */
+    tBTA_SYS_CONN_CBACK     *p_role_cb;              /* role change callback registered by AV */
+    tBTA_SYS_COLLISION      colli_reg;               /* collision handling module */
+#if ( BTM_EIR_SERVER_INCLUDED == TRUE )&&(BTA_EIR_CANNED_UUID_LIST != TRUE)
+    tBTA_SYS_EIR_CBACK      *eir_cb;                /* add/remove UUID into EIR */
+#endif
+#if (BTM_SSR_INCLUDED == TRUE)
+    tBTA_SYS_SSR_CFG_CBACK      *p_ssr_cb;
+#endif
+} tBTA_SYS_CB;
+
+
+
+
+/*****************************************************************************
+**  Global variables
+*****************************************************************************/
+
+/* system manager control block */
+#if BTA_DYNAMIC_MEMORY == FALSE
+extern tBTA_SYS_CB bta_sys_cb;
+#else
+extern tBTA_SYS_CB *bta_sys_cb_ptr;
+#define bta_sys_cb (*bta_sys_cb_ptr)
+#endif
+
+
+/* system manager configuration structure */
+extern tBTA_SYS_CFG *p_bta_sys_cfg;
+
+
+
+/* functions used for BTA SYS HW state machine */
+void bta_sys_hw_btm_cback( tBTM_DEV_STATUS status );
+void bta_sys_hw_error(tBTA_SYS_HW_MSG *p_sys_hw_msg);
+void bta_sys_hw_api_enable( tBTA_SYS_HW_MSG *p_sys_hw_msg );
+void bta_sys_hw_api_disable(tBTA_SYS_HW_MSG *p_sys_hw_msg);
+void bta_sys_hw_evt_enabled(tBTA_SYS_HW_MSG *p_sys_hw_msg);
+void bta_sys_hw_evt_disabled(tBTA_SYS_HW_MSG *p_sys_hw_msg);
+void bta_sys_hw_evt_stack_enabled(tBTA_SYS_HW_MSG *p_sys_hw_msg);
+
+BOOLEAN bta_sys_sm_execute(BT_HDR *p_msg);
+
+
+
+
+
+#endif /* BTA_SYS_INT_H */
diff --git a/bta/sys/bta_sys_main.c b/bta/sys/bta_sys_main.c
new file mode 100644
index 0000000..c1554bb
--- /dev/null
+++ b/bta/sys/bta_sys_main.c
@@ -0,0 +1,722 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the main implementation file for the BTA system manager.
+ *
+ ******************************************************************************/
+
+#include "btm_api.h"
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_sys_int.h"
+#include "bta_sys_ci.h"
+#include "bta_sys_co.h"
+#if BTA_FM_INCLUDED == TRUE
+#include "bta_fm_api.h"
+#endif
+#if BTA_FMTX_INCLUDED == TRUE
+#include "bta_fmtx_api.h"
+#endif
+#if GPS_INCLUDED == TRUE
+#include "bta_gps_api.h"
+#endif
+
+#include "gki.h"
+#include "ptim.h"
+#include <string.h>
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+#include "bta_ar_api.h"
+#endif
+
+/* protocol timer update period, in milliseconds */
+#ifndef BTA_SYS_TIMER_PERIOD
+#define BTA_SYS_TIMER_PERIOD            1000
+#endif
+
+/* system manager control block definition */
+#if BTA_DYNAMIC_MEMORY == FALSE
+tBTA_SYS_CB bta_sys_cb;
+#endif
+
+/* trace level */
+/* TODO Bluedroid - Hard-coded trace levels -  Needs to be configurable */
+UINT8 appl_trace_level = BT_TRACE_LEVEL_DEBUG; //APPL_INITIAL_TRACE_LEVEL;
+UINT8 btif_trace_level = BT_TRACE_LEVEL_DEBUG;
+
+static const tBTA_SYS_REG bta_sys_hw_reg =
+{
+    bta_sys_sm_execute,
+    NULL
+};
+
+
+/* type for action functions */
+typedef void (*tBTA_SYS_ACTION)(tBTA_SYS_HW_MSG *p_data);
+
+/* action function list */
+const tBTA_SYS_ACTION bta_sys_action[] =
+{
+    /* device manager local device API events - cf bta_sys.h for events */
+    bta_sys_hw_api_enable,             /* 0  BTA_SYS_HW_API_ENABLE_EVT    */
+    bta_sys_hw_evt_enabled,           /* 1  BTA_SYS_HW_EVT_ENABLED_EVT */
+    bta_sys_hw_evt_stack_enabled,       /* 2  BTA_SYS_HW_EVT_STACK_ENABLED_EVT */
+    bta_sys_hw_api_disable,             /* 3  BTA_SYS_HW_API_DISABLE_EVT     */
+    bta_sys_hw_evt_disabled,           /* 4  BTA_SYS_HW_EVT_DISABLED_EVT  */
+    bta_sys_hw_error                        /* 5   BTA_SYS_HW_ERROR_EVT  */
+};
+
+/* state machine action enumeration list */
+enum
+{
+    /* device manager local device API events */
+    BTA_SYS_HW_API_ENABLE,
+    BTA_SYS_HW_EVT_ENABLED,
+    BTA_SYS_HW_EVT_STACK_ENABLED,
+    BTA_SYS_HW_API_DISABLE,
+    BTA_SYS_HW_EVT_DISABLED,
+    BTA_SYS_HW_ERROR
+};
+
+#define BTA_SYS_NUM_ACTIONS  (BTA_SYS_MAX_EVT & 0x00ff)
+#define BTA_SYS_IGNORE       BTA_SYS_NUM_ACTIONS
+
+/* state table information */
+#define BTA_SYS_ACTIONS              2       /* number of actions */
+#define BTA_SYS_NEXT_STATE           2       /* position of next state */
+#define BTA_SYS_NUM_COLS             3       /* number of columns in state tables */
+
+
+/* state table for OFF state */
+const UINT8 bta_sys_hw_off[][BTA_SYS_NUM_COLS] =
+{
+/* Event                    Action 1               Action 2             Next State */
+/* API_ENABLE    */  {BTA_SYS_HW_API_ENABLE,    BTA_SYS_IGNORE,     BTA_SYS_HW_STARTING},
+/* EVT_ENABLED   */  {BTA_SYS_IGNORE,           BTA_SYS_IGNORE,     BTA_SYS_HW_STARTING},
+/* STACK_ENABLED */  {BTA_SYS_IGNORE,           BTA_SYS_IGNORE,     BTA_SYS_HW_ON},
+/* API_DISABLE   */  {BTA_SYS_HW_EVT_DISABLED,  BTA_SYS_IGNORE,     BTA_SYS_HW_OFF},
+/* EVT_DISABLED  */  {BTA_SYS_IGNORE,           BTA_SYS_IGNORE,     BTA_SYS_HW_OFF},
+/* EVT_ERROR     */  {BTA_SYS_IGNORE,           BTA_SYS_IGNORE,     BTA_SYS_HW_OFF}
+};
+
+const UINT8 bta_sys_hw_starting[][BTA_SYS_NUM_COLS] =
+{
+/* Event                    Action 1                   Action 2               Next State */
+/* API_ENABLE    */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_STARTING}, /* wait for completion event */
+/* EVT_ENABLED   */  {BTA_SYS_HW_EVT_ENABLED,       BTA_SYS_IGNORE,         BTA_SYS_HW_STARTING},
+/* STACK_ENABLED */  {BTA_SYS_HW_EVT_STACK_ENABLED, BTA_SYS_IGNORE,         BTA_SYS_HW_ON},
+/* API_DISABLE   */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_STOPPING}, /* successive disable/enable: change state wait for completion to disable */
+/* EVT_DISABLED  */  {BTA_SYS_HW_EVT_DISABLED,      BTA_SYS_HW_API_ENABLE,  BTA_SYS_HW_STARTING}, /* successive enable/disable: notify, then restart HW */
+/* EVT_ERROR */      {BTA_SYS_HW_ERROR,             BTA_SYS_IGNORE,         BTA_SYS_HW_ON}
+};
+
+const UINT8 bta_sys_hw_on[][BTA_SYS_NUM_COLS] =
+{
+/* Event                    Action 1                   Action 2               Next State */
+/* API_ENABLE    */  {BTA_SYS_HW_API_ENABLE,        BTA_SYS_IGNORE,         BTA_SYS_HW_ON},
+/* EVT_ENABLED   */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_ON},
+/* STACK_ENABLED */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_ON},
+/* API_DISABLE   */  {BTA_SYS_HW_API_DISABLE,       BTA_SYS_IGNORE,         BTA_SYS_HW_ON}, /* don't change the state here, as some other modules might be active */
+/* EVT_DISABLED */   {BTA_SYS_HW_ERROR,             BTA_SYS_IGNORE,         BTA_SYS_HW_ON},
+/* EVT_ERROR */      {BTA_SYS_HW_ERROR,             BTA_SYS_IGNORE,         BTA_SYS_HW_ON}
+};
+
+const UINT8 bta_sys_hw_stopping[][BTA_SYS_NUM_COLS] =
+{
+/* Event                    Action 1                   Action 2               Next State */
+/* API_ENABLE    */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_STARTING}, /* change state, and wait for completion event to enable */
+/* EVT_ENABLED   */  {BTA_SYS_HW_EVT_ENABLED,       BTA_SYS_IGNORE,         BTA_SYS_HW_STOPPING}, /* successive enable/disable: finish the enable before disabling */
+/* STACK_ENABLED */  {BTA_SYS_HW_EVT_STACK_ENABLED, BTA_SYS_HW_API_DISABLE, BTA_SYS_HW_STOPPING}, /* successive enable/disable: notify, then stop */
+/* API_DISABLE   */  {BTA_SYS_IGNORE,               BTA_SYS_IGNORE,         BTA_SYS_HW_STOPPING}, /* wait for completion event */
+/* EVT_DISABLED  */  {BTA_SYS_HW_EVT_DISABLED,      BTA_SYS_IGNORE,         BTA_SYS_HW_OFF},
+/* EVT_ERROR     */  {BTA_SYS_HW_API_DISABLE,       BTA_SYS_IGNORE,         BTA_SYS_HW_STOPPING}
+};
+
+typedef const UINT8 (*tBTA_SYS_ST_TBL)[BTA_SYS_NUM_COLS];
+
+/* state table */
+const tBTA_SYS_ST_TBL bta_sys_st_tbl[] = {
+    bta_sys_hw_off,
+    bta_sys_hw_starting,
+    bta_sys_hw_on,
+    bta_sys_hw_stopping
+};
+
+/*******************************************************************************
+**
+** Function         bta_sys_init
+**
+** Description      BTA initialization; called from task initialization.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_init(void)
+{
+    memset(&bta_sys_cb, 0, sizeof(tBTA_SYS_CB));
+    ptim_init(&bta_sys_cb.ptim_cb, BTA_SYS_TIMER_PERIOD, p_bta_sys_cfg->timer);
+    bta_sys_cb.task_id = GKI_get_taskid();
+    appl_trace_level = p_bta_sys_cfg->trace_level;
+
+    /* register BTA SYS message handler */
+    bta_sys_register( BTA_ID_SYS,  &bta_sys_hw_reg);
+
+    /* register for BTM notifications */
+    BTM_RegisterForDeviceStatusNotif ((tBTM_DEV_STATUS_CB*)&bta_sys_hw_btm_cback );
+
+#if( defined BTA_AR_INCLUDED ) && (BTA_AR_INCLUDED == TRUE)
+    bta_ar_init();
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sm_execute
+**
+** Description      State machine event handling function for DM
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_sys_sm_execute(BT_HDR *p_msg)
+{
+    BOOLEAN freebuf = TRUE;
+    tBTA_SYS_ST_TBL      state_table;
+    UINT8               action;
+    int                 i;
+
+    APPL_TRACE_EVENT2("bta_sys_sm_execute state:%d, event:0x%x",  bta_sys_cb.state, p_msg->event);
+
+    /* look up the state table for the current state */
+    state_table = bta_sys_st_tbl[bta_sys_cb.state];
+    /* update state */
+    bta_sys_cb.state = state_table[p_msg->event & 0x00ff][BTA_SYS_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < BTA_SYS_ACTIONS; i++)
+    {
+        if ((action = state_table[p_msg->event & 0x00ff][i]) != BTA_SYS_IGNORE)
+        {
+            (*bta_sys_action[action])( (tBTA_SYS_HW_MSG*) p_msg);
+        }
+        else
+        {
+            break;
+        }
+    }
+    return freebuf;
+
+}
+
+
+void bta_sys_hw_register( tBTA_SYS_HW_MODULE module, tBTA_SYS_HW_CBACK *cback)
+{
+    bta_sys_cb.sys_hw_cback[module]=cback;
+}
+
+
+void bta_sys_hw_unregister( tBTA_SYS_HW_MODULE module )
+{
+    bta_sys_cb.sys_hw_cback[module]=NULL;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_btm_cback
+**
+** Description     This function is registered by BTA SYS to BTM in order to get status notifications
+**
+**
+** Returns
+**
+*******************************************************************************/
+void bta_sys_hw_btm_cback( tBTM_DEV_STATUS status )
+{
+
+    tBTA_SYS_HW_MSG *sys_event;
+
+    APPL_TRACE_DEBUG1(" bta_sys_hw_btm_cback was called with parameter: %i" , status );
+
+    /* send a message to BTA SYS */
+    if ((sys_event = (tBTA_SYS_HW_MSG *) GKI_getbuf(sizeof(tBTA_SYS_HW_MSG))) != NULL)
+    {
+        if (status == BTM_DEV_STATUS_UP)
+            sys_event->hdr.event = BTA_SYS_EVT_STACK_ENABLED_EVT;
+        else if (status == BTM_DEV_STATUS_DOWN)
+            sys_event->hdr.event = BTA_SYS_ERROR_EVT;
+        else
+        {
+            /* BTM_DEV_STATUS_CMD_TOUT is ignored for now. */
+            GKI_freebuf (sys_event);
+            sys_event = NULL;
+        }
+
+        if (sys_event)
+        {
+            bta_sys_sendmsg(sys_event);
+        }
+    }
+    else
+    {
+        APPL_TRACE_DEBUG0("ERROR bta_sys_hw_btm_cback couldn't send msg" );
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_error
+**
+** Description     In case the HW device stops answering... Try to turn it off, then re-enable all
+**                      previously active SW modules.
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+void bta_sys_hw_error(tBTA_SYS_HW_MSG *p_sys_hw_msg)
+{
+
+    UINT8 module_index;
+
+    APPL_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    for (module_index = 0; module_index < BTA_SYS_MAX_HW_MODULES; module_index++)
+    {
+        if( bta_sys_cb.sys_hw_module_active &  ((UINT32)1 << module_index )) {
+            switch( module_index)
+                {
+                case BTA_SYS_HW_BLUETOOTH:
+                   /* Send BTA_SYS_HW_ERROR_EVT to DM */
+                   if (bta_sys_cb.sys_hw_cback[module_index] != NULL)
+                       bta_sys_cb.sys_hw_cback[module_index] (BTA_SYS_HW_ERROR_EVT);
+                    break;
+                default:
+                    /* not yet supported */
+                    break;
+                }
+        }
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_enable
+**
+** Description     this function is called after API enable and HW has been turned on
+**
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+
+void bta_sys_hw_api_enable( tBTA_SYS_HW_MSG *p_sys_hw_msg )
+{
+    if ((!bta_sys_cb.sys_hw_module_active) && (bta_sys_cb.state != BTA_SYS_HW_ON))
+    {
+        /* register which HW module was turned on */
+        bta_sys_cb.sys_hw_module_active |=  ((UINT32)1 << p_sys_hw_msg->hw_module );
+
+        /* use call-out to power-up HW */
+        bta_sys_hw_co_enable(p_sys_hw_msg->hw_module);
+    }
+    else
+    {
+        /* register which HW module was turned on */
+        bta_sys_cb.sys_hw_module_active |=  ((UINT32)1 << p_sys_hw_msg->hw_module );
+
+        /* HW already in use, so directly notify the caller */
+        if (bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module ]!= NULL )
+            bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module ](  BTA_SYS_HW_ON_EVT   );
+    }
+
+    APPL_TRACE_EVENT2 ("bta_sys_hw_api_enable for %d, active modules 0x%04X",
+                    p_sys_hw_msg->hw_module, bta_sys_cb.sys_hw_module_active);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_disable
+**
+** Description     if no other module is using the HW, this function will call ( if defined ) a user-macro to turn off the HW
+**
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+void bta_sys_hw_api_disable(tBTA_SYS_HW_MSG *p_sys_hw_msg)
+{
+    APPL_TRACE_DEBUG2("bta_sys_hw_api_disable for %d, active modules: 0x%04X",
+        p_sys_hw_msg->hw_module, bta_sys_cb.sys_hw_module_active );
+
+    /* make sure the related SW blocks were stopped */
+    bta_sys_disable( p_sys_hw_msg->hw_module );
+
+
+    /* register which module we turn off */
+    bta_sys_cb.sys_hw_module_active &=  ~((UINT32)1 << p_sys_hw_msg->hw_module );
+
+
+    /* if there are still some SW modules using the HW, just provide an answer to the calling */
+    if( bta_sys_cb.sys_hw_module_active != 0  )
+    {
+        /*  if there are still some SW modules using the HW,  directly notify the caller */
+        if( bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module ]!= NULL )
+            bta_sys_cb.sys_hw_cback[p_sys_hw_msg->hw_module ](  BTA_SYS_HW_OFF_EVT   );
+    }
+    else
+    {
+        /* manually update the state of our system */
+        bta_sys_cb.state = BTA_SYS_HW_STOPPING;
+        /* and use the call-out to disable HW */
+        bta_sys_hw_co_disable(p_sys_hw_msg->hw_module);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_event_enabled
+**
+** Description
+**
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+void bta_sys_hw_evt_enabled(tBTA_SYS_HW_MSG *p_sys_hw_msg)
+{
+    APPL_TRACE_EVENT1("bta_sys_hw_evt_enabled for %i", p_sys_hw_msg->hw_module);
+
+#if ( defined BTM_AUTOMATIC_HCI_RESET && BTM_AUTOMATIC_HCI_RESET == TRUE )
+    /* If device is already up, send a fake "BTM DEVICE UP" using BTA SYS state machine */
+    /* If we are in the middle device initialization, BTM_DEVICE_UP will be issued      */
+    /* by BTM once initialization is done.                                              */
+    if (BTA_DmIsDeviceUp())
+    {
+        bta_sys_hw_btm_cback (BTM_DEV_STATUS_UP);
+    }
+#else
+
+    /* if HCI reset was not sent during stack start-up */
+    BTM_DeviceReset( NULL );
+
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_event_disabled
+**
+** Description
+**
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+void bta_sys_hw_evt_disabled(tBTA_SYS_HW_MSG *p_sys_hw_msg)
+{
+    UINT8 hw_module_index;
+
+    APPL_TRACE_DEBUG1("bta_sys_hw_evt_disabled - module 0x%X", p_sys_hw_msg->hw_module);
+
+    for (hw_module_index = 0; hw_module_index < BTA_SYS_MAX_HW_MODULES; hw_module_index++)
+    {
+        if (bta_sys_cb.sys_hw_cback[hw_module_index] != NULL)
+            bta_sys_cb.sys_hw_cback[hw_module_index] (BTA_SYS_HW_OFF_EVT);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_event_stack_enabled
+**
+** Description     we receive this event from once the SW side is ready ( stack, FW download,... ),
+**                       i.e. we can really start using the device. So notify the app.
+**
+** Returns          success or failure
+**
+*******************************************************************************/
+void bta_sys_hw_evt_stack_enabled(tBTA_SYS_HW_MSG *p_sys_hw_msg)
+{
+    UINT8 hw_module_index;
+
+    APPL_TRACE_DEBUG0(" bta_sys_hw_evt_stack_enabled!notify the callers");
+
+    for (hw_module_index = 0; hw_module_index < BTA_SYS_MAX_HW_MODULES; hw_module_index++ )
+    {
+        if (bta_sys_cb.sys_hw_cback[hw_module_index] != NULL)
+            bta_sys_cb.sys_hw_cback[hw_module_index] (BTA_SYS_HW_ON_EVT);
+    }
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_event
+**
+** Description      BTA event handler; called from task event handler.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_event(BT_HDR *p_msg)
+{
+    UINT8       id;
+    BOOLEAN     freebuf = TRUE;
+
+    APPL_TRACE_EVENT1("BTA got event 0x%x", p_msg->event);
+
+    /* get subsystem id from event */
+    id = (UINT8) (p_msg->event >> 8);
+
+    /* verify id and call subsystem event handler */
+    if ((id < BTA_ID_MAX) && (bta_sys_cb.reg[id] != NULL))
+    {
+        freebuf = (*bta_sys_cb.reg[id]->evt_hdlr)(p_msg);
+    }
+    else
+    {
+        APPL_TRACE_WARNING1("BTA got unregistered event id %d", id);
+    }
+
+    if (freebuf)
+    {
+        GKI_freebuf(p_msg);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_timer_update
+**
+** Description      Update the BTA timer list and handle expired timers.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTA_API void bta_sys_timer_update(void)
+{
+    if (!bta_sys_cb.timers_disabled)
+    {
+        ptim_timer_update(&bta_sys_cb.ptim_cb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_register
+**
+** Description      Called by other BTA subsystems to register their event
+**                  handler.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_register(UINT8 id, const tBTA_SYS_REG *p_reg)
+{
+    bta_sys_cb.reg[id] = (tBTA_SYS_REG *) p_reg;
+    bta_sys_cb.is_reg[id] = TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_deregister
+**
+** Description      Called by other BTA subsystems to de-register
+**                  handler.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_deregister(UINT8 id)
+{
+    bta_sys_cb.is_reg[id] = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_is_register
+**
+** Description      Called by other BTA subsystems to get registeration
+**                  status.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN bta_sys_is_register(UINT8 id)
+{
+    return bta_sys_cb.is_reg[id];
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_sendmsg
+**
+** Description      Send a GKI message to BTA.  This function is designed to
+**                  optimize sending of messages to BTA.  It is called by BTA
+**                  API functions and call-in functions.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_sendmsg(void *p_msg)
+{
+    GKI_send_msg(bta_sys_cb.task_id, p_bta_sys_cfg->mbox, p_msg);
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_start_timer
+**
+** Description      Start a protocol timer for the specified amount
+**                  of time in milliseconds.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_start_timer(TIMER_LIST_ENT *p_tle, UINT16 type, INT32 timeout)
+{
+    ptim_start_timer(&bta_sys_cb.ptim_cb, p_tle, type, timeout);
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_stop_timer
+**
+** Description      Stop a BTA timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_stop_timer(TIMER_LIST_ENT *p_tle)
+{
+    ptim_stop_timer(&bta_sys_cb.ptim_cb, p_tle);
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_disable
+**
+** Description      For each registered subsystem execute its disable function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_disable(tBTA_SYS_HW_MODULE module)
+{
+    int bta_id = 0;
+    int bta_id_max = 0;
+
+    APPL_TRACE_DEBUG1("bta_sys_disable: module %i", module);
+
+    switch( module )
+    {
+        case BTA_SYS_HW_BLUETOOTH:
+            bta_id = BTA_ID_DM;
+            bta_id_max = BTA_ID_BLUETOOTH_MAX;
+            break;
+        case BTA_SYS_HW_FMRX:
+            bta_id = BTA_ID_FM;
+            bta_id_max = BTA_ID_FM;
+            break;
+        case BTA_SYS_HW_FMTX:
+            bta_id = BTA_ID_FMTX;
+            bta_id_max = BTA_ID_FMTX;
+            break;
+        case BTA_SYS_HW_GPS:
+            bta_id = BTA_ID_GPS;
+            bta_id_max = BTA_ID_GPS;
+            break;
+        default:
+            APPL_TRACE_WARNING0("bta_sys_disable: unkown module");
+            return;
+    }
+
+    for ( ; bta_id <= bta_id_max; bta_id++)
+    {
+        if (bta_sys_cb.reg[bta_id] != NULL)
+        {
+            if (bta_sys_cb.is_reg[bta_id] == TRUE  &&  bta_sys_cb.reg[bta_id]->disable != NULL)
+            {
+                (*bta_sys_cb.reg[bta_id]->disable)();
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_disable_timers
+**
+** Description      Disable sys timer event handling
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_disable_timers(void)
+{
+    bta_sys_cb.timers_disabled = TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_set_trace_level
+**
+** Description      Set trace level for BTA
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_set_trace_level(UINT8 level)
+{
+    appl_trace_level = level;
+}
+
+/*******************************************************************************
+**
+** Function         bta_sys_get_sys_features
+**
+** Description      Returns sys_features to other BTA modules.
+**
+** Returns          sys_features
+**
+*******************************************************************************/
+UINT16 bta_sys_get_sys_features (void)
+{
+    return bta_sys_cb.sys_features;
+}
+
+
diff --git a/bta/sys/ptim.c b/bta/sys/ptim.c
new file mode 100644
index 0000000..9dffc66
--- /dev/null
+++ b/bta/sys/ptim.c
@@ -0,0 +1,162 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Protocol timer services.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+#include "ptim.h"
+#include "bta_sys.h"
+
+/*******************************************************************************
+**
+** Function         ptim_init
+**
+** Description      Initialize a protocol timer control block.  Parameter
+**                  period is the GKI timer period in milliseconds.  Parameter
+**                  timer_id is the GKI timer id.
+**
+** Returns          void
+**
+*******************************************************************************/
+void ptim_init(tPTIM_CB *p_cb, UINT16 period, UINT8 timer_id)
+{
+    GKI_init_timer_list(&p_cb->timer_queue);
+    p_cb->period = period;
+    p_cb->timer_id = timer_id;
+}
+
+/*******************************************************************************
+**
+** Function         ptim_timer_update
+**
+** Description      Update the protocol timer list and handle expired timers.
+**                  This function is called from the task running the protocol
+**                  timers when the periodic GKI timer expires.
+**
+** Returns          void
+**
+*******************************************************************************/
+void ptim_timer_update(tPTIM_CB *p_cb)
+{
+    TIMER_LIST_ENT *p_tle;
+    BT_HDR *p_msg;
+    UINT32 new_ticks_count;
+    INT32  period_in_ticks;
+
+    /* To handle the case when the function is called less frequently than the period
+       we must convert determine the number of ticks since the last update, then
+       convert back to milliseconds before updating timer list */
+    new_ticks_count = GKI_get_tick_count();
+
+    /* Check for wrapped condition */
+    if (new_ticks_count >= p_cb->last_gki_ticks)
+    {
+        period_in_ticks = (INT32)(new_ticks_count - p_cb->last_gki_ticks);
+    }
+    else
+    {
+        period_in_ticks = (INT32)(((UINT32)0xffffffff - p_cb->last_gki_ticks)
+                            + new_ticks_count + 1);
+    }
+
+    /* update timer list */
+    GKI_update_timer_list(&p_cb->timer_queue, GKI_TICKS_TO_MS(period_in_ticks));
+
+    p_cb->last_gki_ticks = new_ticks_count;
+
+    /* while there are expired timers */
+    while((p_cb->timer_queue.p_first) && (p_cb->timer_queue.p_first->ticks <= 0))
+    {
+        /* removed expired timer from list */
+        p_tle = p_cb->timer_queue.p_first;
+        GKI_remove_from_timer_list(&p_cb->timer_queue, p_tle);
+
+        /* call timer callback */
+        if(p_tle->p_cback)
+        {
+            (*p_tle->p_cback)(p_tle);
+        }
+        else if(p_tle->event)
+        {
+            if ((p_msg = (BT_HDR *) GKI_getbuf(sizeof(BT_HDR))) != NULL)
+            {
+                p_msg->event = p_tle->event;
+                p_msg->layer_specific = 0;
+                bta_sys_sendmsg(p_msg);
+            }
+        }
+    }
+
+    /* if timer list is empty stop periodic GKI timer */
+    if (p_cb->timer_queue.p_first == NULL)
+    {
+        GKI_stop_timer(p_cb->timer_id);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         ptim_start_timer
+**
+** Description      Start a protocol timer for the specified amount
+**                  of time in seconds.
+**
+** Returns          void
+**
+*******************************************************************************/
+void ptim_start_timer(tPTIM_CB *p_cb, TIMER_LIST_ENT *p_tle, UINT16 type, INT32 timeout)
+{
+    /* if timer list is currently empty, start periodic GKI timer */
+    if (p_cb->timer_queue.p_first == NULL)
+    {
+        p_cb->last_gki_ticks = GKI_get_tick_count();
+        GKI_start_timer(p_cb->timer_id, GKI_MS_TO_TICKS(p_cb->period), TRUE);
+    }
+
+    GKI_remove_from_timer_list(&p_cb->timer_queue, p_tle);
+
+    p_tle->event = type;
+    p_tle->ticks = timeout;
+
+    GKI_add_to_timer_list(&p_cb->timer_queue, p_tle);
+}
+
+/*******************************************************************************
+**
+** Function         ptim_stop_timer
+**
+** Description      Stop a protocol timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void ptim_stop_timer(tPTIM_CB *p_cb, TIMER_LIST_ENT *p_tle)
+{
+    GKI_remove_from_timer_list (&p_cb->timer_queue, p_tle);
+
+    /* if timer list is empty stop periodic GKI timer */
+    if (p_cb->timer_queue.p_first == NULL)
+    {
+        GKI_stop_timer(p_cb->timer_id);
+    }
+}
diff --git a/bta/sys/utl.c b/bta/sys/utl.c
new file mode 100644
index 0000000..4bb1d95
--- /dev/null
+++ b/bta/sys/utl.c
@@ -0,0 +1,296 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains utility functions.
+ *
+ ******************************************************************************/
+#include "utl.h"
+#include "gki.h"
+#include "btm_api.h"
+
+/*******************************************************************************
+**
+** Function         utl_str2int
+**
+** Description      This utility function converts a character string to an
+**                  integer.  Acceptable values in string are 0-9.  If invalid
+**                  string or string value too large, -1 is returned.  Leading
+**                  spaces are skipped.
+**
+**
+** Returns          Integer value or -1 on error.
+**
+*******************************************************************************/
+INT16 utl_str2int(const char *p_s)
+{
+    INT32   val = 0;
+
+    for (;*p_s == ' ' && *p_s != 0; p_s++);
+
+    if (*p_s == 0) return -1;
+
+    for (;;)
+    {
+        if ((*p_s < '0') || (*p_s > '9')) return -1;
+
+        val += (INT32) (*p_s++ - '0');
+
+        if (val > 32767) return -1;
+
+        if (*p_s == 0)
+        {
+            return (INT16) val;
+        }
+        else
+        {
+            val *= 10;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         utl_strucmp
+**
+** Description      This utility function compares two strings in uppercase.
+**                  String p_s must be uppercase.  String p_t is converted to
+**                  uppercase if lowercase.  If p_s ends first, the substring
+**                  match is counted as a match.
+**
+**
+** Returns          0 if strings match, nonzero otherwise.
+**
+*******************************************************************************/
+int utl_strucmp(const char *p_s, const char *p_t)
+{
+    char c;
+
+    while (*p_s && *p_t)
+    {
+        c = *p_t++;
+        if (c >= 'a' && c <= 'z')
+        {
+            c -= 0x20;
+        }
+        if (*p_s++ != c)
+        {
+            return -1;
+        }
+    }
+    /* if p_t hit null first, no match */
+    if (*p_t == 0 && *p_s != 0)
+    {
+        return 1;
+    }
+    /* else p_s hit null first, count as match */
+    else
+    {
+        return 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         utl_itoa
+**
+** Description      This utility function converts a UINT16 to a string.  The
+**                  string is NULL-terminated.  The length of the string is
+**                  returned;
+**
+**
+** Returns          Length of string.
+**
+*******************************************************************************/
+UINT8 utl_itoa(UINT16 i, char *p_s)
+{
+    UINT16  j, k;
+    char    *p = p_s;
+    BOOLEAN fill = FALSE;
+
+    if (i == 0)
+    {
+        /* take care of zero case */
+        *p++ = '0';
+    }
+    else
+    {
+        for(j = 10000; j > 0; j /= 10)
+        {
+            k = i / j;
+            i %= j;
+            if (k > 0 || fill)
+            {
+              *p++ = k + '0';
+              fill = TRUE;
+            }
+        }
+    }
+    *p = 0;
+    return (UINT8) (p - p_s);
+}
+
+/*******************************************************************************
+**
+** Function         utl_freebuf
+**
+** Description      This function calls GKI_freebuf to free the buffer passed
+**                  in, if buffer pointer is not NULL, and also initializes
+**                  buffer pointer to NULL.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void utl_freebuf(void **p)
+{
+    if (*p != NULL)
+    {
+        GKI_freebuf(*p);
+        *p = NULL;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         utl_set_device_class
+**
+** Description      This function updates the local Device Class.
+**
+** Parameters:
+**                  p_cod   - Pointer to the device class to set to
+**
+**                  cmd     - the fields of the device class to update.
+**                            BTA_UTL_SET_COD_MAJOR_MINOR, - overwrite major, minor class
+**                            BTA_UTL_SET_COD_SERVICE_CLASS - set the bits in the input
+**                            BTA_UTL_CLR_COD_SERVICE_CLASS - clear the bits in the input
+**                            BTA_UTL_SET_COD_ALL - overwrite major, minor, set the bits in service class
+**                            BTA_UTL_INIT_COD - overwrite major, minor, and service class
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+BOOLEAN utl_set_device_class(tBTA_UTL_COD *p_cod, UINT8 cmd)
+{
+    UINT8 *dev;
+    UINT16 service;
+    UINT8  minor, major;
+    DEV_CLASS dev_class;
+
+    dev = BTM_ReadDeviceClass();
+    BTM_COD_SERVICE_CLASS( service, dev );
+    BTM_COD_MINOR_CLASS(minor, dev );
+    BTM_COD_MAJOR_CLASS(major, dev );
+
+    switch(cmd)
+    {
+    case BTA_UTL_SET_COD_MAJOR_MINOR:
+        minor = p_cod->minor & BTM_COD_MINOR_CLASS_MASK;
+        major = p_cod->major & BTM_COD_MAJOR_CLASS_MASK;
+        break;
+
+    case BTA_UTL_SET_COD_SERVICE_CLASS:
+        /* clear out the bits that is not SERVICE_CLASS bits */
+        p_cod->service &= BTM_COD_SERVICE_CLASS_MASK;
+        service = service | p_cod->service;
+        break;
+
+    case BTA_UTL_CLR_COD_SERVICE_CLASS:
+        p_cod->service &= BTM_COD_SERVICE_CLASS_MASK;
+        service = service & (~p_cod->service);
+        break;
+
+    case BTA_UTL_SET_COD_ALL:
+        minor = p_cod->minor & BTM_COD_MINOR_CLASS_MASK;
+        major = p_cod->major & BTM_COD_MAJOR_CLASS_MASK;
+        p_cod->service &= BTM_COD_SERVICE_CLASS_MASK;
+        service = service | p_cod->service;
+        break;
+
+    case BTA_UTL_INIT_COD:
+        minor = p_cod->minor & BTM_COD_MINOR_CLASS_MASK;
+        major = p_cod->major & BTM_COD_MAJOR_CLASS_MASK;
+        service = p_cod->service & BTM_COD_SERVICE_CLASS_MASK;
+        break;
+
+    default:
+        return FALSE;
+    }
+
+    /* convert the fields into the device class type */
+    FIELDS_TO_COD(dev_class, minor, major, service);
+
+    if (BTM_SetDeviceClass(dev_class) == BTM_SUCCESS)
+        return TRUE;
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         utl_isintstr
+**
+** Description      This utility function checks if the given string is an
+**                  integer string or not
+**
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+BOOLEAN utl_isintstr(const char *p_s)
+{
+    UINT16 i = 0;
+
+    for(i=0; p_s[i] != 0; i++)
+    {
+        if(((p_s[i] < '0') || (p_s[i] > '9')) && (p_s[i] != ';'))
+            return FALSE;
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         utl_isdialstr
+**
+** Description      This utility function checks if the given string contains
+**                  only dial digits or not
+**
+**
+** Returns          TRUE if successful, Otherwise FALSE
+**
+*******************************************************************************/
+BOOLEAN utl_isdialstr(const char *p_s)
+{
+    UINT16 i = 0;
+
+    for(i=0; p_s[i] != 0; i++)
+    {
+        if(!(((p_s[i] >= '0') && (p_s[i] <= '9'))
+            || (p_s[i] == '*') || (p_s[i] == '+') || (p_s[i] == '#') || (p_s[i] == ';')
+            || ((p_s[i] >= 'A') && (p_s[i] <= 'C'))))
+            return FALSE;
+    }
+
+    return TRUE;
+}
+
+
diff --git a/btif/co/bta_ag_co.c b/btif/co/bta_ag_co.c
new file mode 100644
index 0000000..cd969f8
--- /dev/null
+++ b/btif/co/bta_ag_co.c
@@ -0,0 +1,132 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include "gki.h"
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_ag_api.h"
+#include "bta_ag_co.h"
+#include "bte_appl.h"
+
+#define LOG_TAG "BTA_AG_CO: "
+
+#ifndef LINUX_NATIVE
+#include <cutils/properties.h>
+#include <cutils/log.h>
+#else
+#include <stdio.h>
+#define LOGI(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#define LOGD(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#define LOGV(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#define LOGE(format, ...)  fprintf (stderr, LOG_TAG format"\n", ## __VA_ARGS__)
+#endif
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_init
+**
+** Description      This callout function is executed by AG when it is
+**                  started by calling BTA_AgEnable().  This function can be
+**                  used by the phone to initialize audio paths or for other
+**                  initialization purposes.
+**
+**
+** Returns          Void.
+**
+*******************************************************************************/
+void bta_ag_co_init(void)
+{
+    BTM_WriteVoiceSettings(AG_VOICE_SETTINGS);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_audio_state
+**
+** Description      This function is called by the AG before the audio connection
+**                  is brought up, after it comes up, and after it goes down.
+**
+** Parameters       handle - handle of the AG instance
+**                  state - Audio state
+**                      BTA_AG_CO_AUD_STATE_OFF     - Audio has been turned off
+**                      BTA_AG_CO_AUD_STATE_OFF_XFER - Audio has been turned off (xfer)
+**                      BTA_AG_CO_AUD_STATE_ON      - Audio has been turned on
+**                      BTA_AG_CO_AUD_STATE_SETUP   - Audio is about to be turned on
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_co_audio_state(UINT16 handle, UINT8 app_id, UINT8 state)
+{
+    BTIF_TRACE_DEBUG2("bta_ag_co_audio_state: handle %d, state %d", handle, state);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_data_open
+**
+** Description      This function is executed by AG when a service level connection
+**                  is opened.  The phone can use this function to set
+**                  up data paths or perform any required initialization or
+**                  set up particular to the connected service.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_co_data_open(UINT16 handle, tBTA_SERVICE_ID service)
+{
+    BTIF_TRACE_DEBUG2("bta_ag_co_data_open handle:%d service:%d", handle, service);
+}
+
+/*******************************************************************************
+**
+** Function         bta_ag_co_data_close
+**
+** Description      This function is called by AG when a service level
+**                  connection is closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_ag_co_data_close(UINT16 handle)
+{
+    BTIF_TRACE_DEBUG1("bta_ag_co_data_close handle:%d", handle);
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_ag_co_tx_write
+ **
+ ** Description      This function is called by the AG to send data to the
+ **                  phone when the AG is configured for AT command pass-through.
+ **                  The implementation of this function must copy the data to
+ **                  the phones memory.
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void bta_ag_co_tx_write(UINT16 handle, UINT8 * p_data, UINT16 len)
+{
+   BTIF_TRACE_DEBUG2( "bta_ag_co_tx_write: handle: %d, len: %d", handle, len );
+}
+
diff --git a/btif/co/bta_av_co.c b/btif/co/bta_av_co.c
new file mode 100644
index 0000000..6089532
--- /dev/null
+++ b/btif/co/bta_av_co.c
@@ -0,0 +1,1504 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the advanced audio/video call-out function implementation for
+ *  BTIF.
+ *
+ ******************************************************************************/
+
+#include "string.h"
+#include "a2d_api.h"
+#include "a2d_sbc.h"
+#include "bta_sys.h"
+#include "bta_av_api.h"
+#include "bta_av_co.h"
+#include "bta_av_ci.h"
+#include "bta_av_sbc.h"
+
+#include "btif_media.h"
+#include "sbc_encoder.h"
+#include "btif_av_co.h"
+
+
+/*****************************************************************************
+ **  Constants
+ *****************************************************************************/
+
+#define FUNC_TRACE()     APPL_TRACE_DEBUG1("%s", __FUNCTION__);
+
+/* Macro to retrieve the number of elements in a statically allocated array */
+#define BTA_AV_CO_NUM_ELEMENTS(__a) (sizeof(__a)/sizeof((__a)[0]))
+
+/* MIN and MAX macros */
+#define BTA_AV_CO_MIN(X,Y) ((X) < (Y) ? (X) : (Y))
+#define BTA_AV_CO_MAX(X,Y) ((X) > (Y) ? (X) : (Y))
+
+/* Macro to convert audio handle to index and vice versa */
+#define BTA_AV_CO_AUDIO_HNDL_TO_INDX(hndl) (((hndl) & (~BTA_AV_CHNL_MSK)) - 1)
+#define BTA_AV_CO_AUDIO_INDX_TO_HNDL(indx) (((indx) + 1) | BTA_AV_CHNL_AUDIO)
+
+
+/* Offsets to access codec information in SBC codec */
+#define BTA_AV_CO_SBC_FREQ_CHAN_OFF    3
+#define BTA_AV_CO_SBC_BLOCK_BAND_OFF   4
+#define BTA_AV_CO_SBC_MIN_BITPOOL_OFF  5
+#define BTA_AV_CO_SBC_MAX_BITPOOL_OFF  6
+
+#define BTA_AV_CO_SBC_MAX_BITPOOL  53
+
+/* SCMS-T protect info */
+const UINT8 bta_av_co_cp_scmst[BTA_AV_CP_INFO_LEN] = "\x02\x02\x00";
+
+/* SBC codec capabilities */
+const tA2D_SBC_CIE bta_av_co_sbc_caps =
+{
+    (A2D_SBC_IE_SAMP_FREQ_44), /* samp_freq */
+    (A2D_SBC_IE_CH_MD_MONO | A2D_SBC_IE_CH_MD_STEREO | A2D_SBC_IE_CH_MD_JOINT | A2D_SBC_IE_CH_MD_DUAL), /* ch_mode */
+    (A2D_SBC_IE_BLOCKS_16 | A2D_SBC_IE_BLOCKS_12 | A2D_SBC_IE_BLOCKS_8 | A2D_SBC_IE_BLOCKS_4), /* block_len */
+    (A2D_SBC_IE_SUBBAND_4 | A2D_SBC_IE_SUBBAND_8), /* num_subbands */
+    (A2D_SBC_IE_ALLOC_MD_L | A2D_SBC_IE_ALLOC_MD_S), /* alloc_mthd */
+    BTA_AV_CO_SBC_MAX_BITPOOL, /* max_bitpool */
+    A2D_SBC_IE_MIN_BITPOOL /* min_bitpool */
+};
+
+#if !defined(BTIF_AV_SBC_DEFAULT_SAMP_FREQ)
+#define BTIF_AV_SBC_DEFAULT_SAMP_FREQ A2D_SBC_IE_SAMP_FREQ_44
+#endif
+
+/* Default SBC codec configuration */
+const tA2D_SBC_CIE btif_av_sbc_default_config =
+{
+    BTIF_AV_SBC_DEFAULT_SAMP_FREQ,   /* samp_freq */
+    A2D_SBC_IE_CH_MD_JOINT,         /* ch_mode */
+    A2D_SBC_IE_BLOCKS_16,           /* block_len */
+    A2D_SBC_IE_SUBBAND_8,           /* num_subbands */
+    A2D_SBC_IE_ALLOC_MD_L,          /* alloc_mthd */
+    BTA_AV_CO_SBC_MAX_BITPOOL,      /* max_bitpool */
+    A2D_SBC_IE_MIN_BITPOOL          /* min_bitpool */
+};
+
+
+/*****************************************************************************
+**  Local data
+*****************************************************************************/
+typedef struct
+{
+    UINT8 sep_info_idx;                 /* local SEP index (in BTA tables) */
+    UINT8 seid;                         /* peer SEP index (in peer tables) */
+    UINT8 codec_type;                   /* peer SEP codec type */
+    UINT8 codec_caps[AVDT_CODEC_SIZE];  /* peer SEP codec capabilities */
+    UINT8 num_protect;                  /* peer SEP number of CP elements */
+    UINT8 protect_info[BTA_AV_CP_INFO_LEN];  /* peer SEP content protection info */
+} tBTA_AV_CO_SINK;
+
+typedef struct
+{
+    BD_ADDR         addr;               /* address of audio/video peer */
+    tBTA_AV_CO_SINK snks[BTIF_SV_AV_AA_SEP_INDEX]; /* array of supported sinks */
+    UINT8           num_snks;           /* total number of sinks at peer */
+    UINT8           num_seps;           /* total number of seids at peer */
+    UINT8           num_rx_snks;        /* number of received sinks */
+    UINT8           num_sup_snks;       /* number of supported sinks in the snks array */
+    tBTA_AV_CO_SINK *p_snk;             /* currently selected sink */
+    UINT8           codec_cfg[AVDT_CODEC_SIZE]; /* current codec configuration */
+    BOOLEAN         cp_active;          /* current CP configuration */
+    BOOLEAN         acp;                /* acceptor */
+    BOOLEAN         recfg_needed;       /* reconfiguration is needed */
+    BOOLEAN         opened;             /* opened */
+    UINT16          mtu;                /* maximum transmit unit size */
+} tBTA_AV_CO_PEER;
+
+typedef struct
+{
+    BOOLEAN active;
+    UINT8 flag;
+} tBTA_AV_CO_CP;
+
+typedef struct
+{
+    /* Connected peer information */
+    tBTA_AV_CO_PEER peers[BTA_AV_NUM_STRS];
+    /* Current codec configuration - access to this variable must be protected */
+    tBTIF_AV_CODEC_INFO codec_cfg;
+    tBTIF_AV_CODEC_INFO codec_cfg_setconfig; /* remote peer setconfig preference */
+
+    tBTA_AV_CO_CP cp;
+} tBTA_AV_CO_CB;
+
+/* Control block instance */
+static tBTA_AV_CO_CB bta_av_co_cb;
+
+static BOOLEAN bta_av_co_audio_codec_build_config(const UINT8 *p_codec_caps, UINT8 *p_codec_cfg);
+static void bta_av_co_audio_peer_reset_config(tBTA_AV_CO_PEER *p_peer);
+static BOOLEAN bta_av_co_cp_is_scmst(const UINT8 *p_protectinfo);
+static BOOLEAN bta_av_co_audio_sink_has_scmst(const tBTA_AV_CO_SINK *p_sink);
+static BOOLEAN bta_av_co_audio_peer_supports_codec(tBTA_AV_CO_PEER *p_peer, UINT8 *p_snk_index);
+static BOOLEAN bta_av_co_audio_media_supports_config(UINT8 codec_type, const UINT8 *p_codec_cfg);
+
+
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_is_active
+ **
+ ** Description      Get the current configuration of content protection
+ **
+ ** Returns          TRUE if the current streaming has CP, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_cp_is_active(void)
+{
+    FUNC_TRACE();
+    return bta_av_co_cb.cp.active;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_get_flag
+ **
+ ** Description      Get content protection flag
+ **                  BTA_AV_CP_SCMS_COPY_NEVER
+ **                  BTA_AV_CP_SCMS_COPY_ONCE
+ **                  BTA_AV_CP_SCMS_COPY_FREE
+ **
+ ** Returns          The current flag value
+ **
+ *******************************************************************************/
+UINT8 bta_av_co_cp_get_flag(void)
+{
+    FUNC_TRACE();
+    return bta_av_co_cb.cp.flag;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_set_flag
+ **
+ ** Description      Set content protection flag
+ **                  BTA_AV_CP_SCMS_COPY_NEVER
+ **                  BTA_AV_CP_SCMS_COPY_ONCE
+ **                  BTA_AV_CP_SCMS_COPY_FREE
+ **
+ ** Returns          TRUE if setting the SCMS flag is supported else FALSE
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_cp_set_flag(UINT8 cp_flag)
+{
+    FUNC_TRACE();
+
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+#else
+    if (cp_flag != BTA_AV_CP_SCMS_COPY_FREE)
+    {
+        return FALSE;
+    }
+#endif
+    bta_av_co_cb.cp.flag = cp_flag;
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_get_peer
+ **
+ ** Description      find the peer entry for a given handle
+ **
+ ** Returns          the control block
+ **
+ *******************************************************************************/
+static tBTA_AV_CO_PEER *bta_av_co_get_peer(tBTA_AV_HNDL hndl)
+{
+    UINT8 index;
+    FUNC_TRACE();
+
+    index = BTA_AV_CO_AUDIO_HNDL_TO_INDX(hndl);
+
+    /* Sanity check */
+    if (index >= BTA_AV_CO_NUM_ELEMENTS(bta_av_co_cb.peers))
+    {
+        APPL_TRACE_ERROR1("bta_av_co_get_peer peer index out of bounds:%d", index);
+        return NULL;
+    }
+
+    return &bta_av_co_cb.peers[index];
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_init
+ **
+ ** Description      This callout function is executed by AV when it is
+ **                  started by calling BTA_AvRegister().  This function can be
+ **                  used by the phone to initialize audio paths or for other
+ **                  initialization purposes.
+ **
+ **
+ ** Returns          Stream codec and content protection capabilities info.
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_init(UINT8 *p_codec_type, UINT8 *p_codec_info, UINT8 *p_num_protect,
+        UINT8 *p_protect_info, UINT8 index)
+{
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG1("bta_av_co_audio_init: %d", index);
+
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+    {
+        UINT8 *p = p_protect_info;
+
+        /* Content protection info - support SCMS-T */
+        *p_num_protect = 1;
+        *p++ = BTA_AV_CP_LOSC;
+        UINT16_TO_STREAM(p, BTA_AV_CP_SCMS_T_ID);
+
+    }
+#else
+    /* By default - no content protection info */
+    *p_num_protect = 0;
+    *p_protect_info = 0;
+#endif
+
+    /* reset remote preference through setconfig */
+    bta_av_co_cb.codec_cfg_setconfig.id = BTIF_AV_CODEC_NONE;
+
+    switch (index)
+    {
+    case BTIF_SV_AV_AA_SBC_INDEX:
+        /* Set up for SBC codec */
+        *p_codec_type = BTA_AV_CODEC_SBC;
+
+        /* This should not fail because we are using constants for parameters */
+        A2D_BldSbcInfo(AVDT_MEDIA_AUDIO, (tA2D_SBC_CIE *) &bta_av_co_sbc_caps, p_codec_info);
+
+        /* Codec is valid */
+        return TRUE;
+
+
+    default:
+        /* Not valid */
+        return FALSE;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_disc_res
+ **
+ ** Description      This callout function is executed by AV to report the
+ **                  number of stream end points (SEP) were found during the
+ **                  AVDT stream discovery process.
+ **
+ **
+ ** Returns          void.
+ **
+ *******************************************************************************/
+BTA_API void bta_av_co_audio_disc_res(tBTA_AV_HNDL hndl, UINT8 num_seps, UINT8 num_snk,
+        BD_ADDR addr)
+{
+    tBTA_AV_CO_PEER *p_peer;
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG3("bta_av_co_audio_disc_res h:x%x num_seps:%d num_snk:%d",
+            hndl, num_seps, num_snk);
+
+    /* Find the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_disc_res could not find peer entry");
+        return;
+    }
+
+    /* Sanity check : this should never happen */
+    if (p_peer->opened)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_disc_res peer already opened");
+    }
+
+    /* Copy the discovery results */
+    bdcpy(p_peer->addr, addr);
+    p_peer->num_snks = num_snk;
+    p_peer->num_seps = num_seps;
+    p_peer->num_rx_snks = 0;
+    p_peer->num_sup_snks = 0;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_getconfig
+ **
+ ** Description      This callout function is executed by AV to retrieve the
+ **                  desired codec and content protection configuration for the
+ **                  audio stream.
+ **
+ **
+ ** Returns          Stream codec and content protection configuration info.
+ **
+ *******************************************************************************/
+BTA_API UINT8 bta_av_co_audio_getconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+        UINT8 *p_codec_info, UINT8 *p_sep_info_idx, UINT8 seid, UINT8 *p_num_protect,
+        UINT8 *p_protect_info)
+
+{
+    UINT8 result = A2D_FAIL;
+    BOOLEAN supported;
+    tBTA_AV_CO_PEER *p_peer;
+    tBTA_AV_CO_SINK *p_sink;
+    UINT8 codec_cfg[AVDT_CODEC_SIZE];
+    UINT8 index;
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG3("bta_av_co_audio_getconfig handle:0x%x codec_type:%d seid:%d", hndl, codec_type, seid);
+    APPL_TRACE_DEBUG4("num_protect:0x%02x protect_info:0x%02x%02x%02x",
+        *p_num_protect, p_protect_info[0], p_protect_info[1], p_protect_info[2]);
+
+    /* Retrieve the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_getconfig could not find peer entry");
+        return A2D_FAIL;
+    }
+
+    APPL_TRACE_DEBUG4("bta_av_co_audio_getconfig peer(o=%d,n_snks=%d,n_rx_snks=%d,n_sup_snks=%d)",
+            p_peer->opened, p_peer->num_snks, p_peer->num_rx_snks, p_peer->num_sup_snks);
+
+    /* Increment the number of received sinks capabilities */
+    p_peer->num_rx_snks++;
+
+    /* Check if this is a supported configuration */
+    supported = FALSE;
+    switch (codec_type)
+    {
+    case BTA_AV_CODEC_SBC:
+        supported = TRUE;
+        break;
+
+    default:
+        break;
+    }
+
+    if (supported)
+    {
+        /* If there is room for a new one */
+        if (p_peer->num_sup_snks < BTA_AV_CO_NUM_ELEMENTS(p_peer->snks))
+        {
+            p_sink = &p_peer->snks[p_peer->num_sup_snks++];
+
+            APPL_TRACE_DEBUG6("bta_av_co_audio_getconfig saved caps[%x:%x:%x:%x:%x:%x]",
+                    p_codec_info[1], p_codec_info[2], p_codec_info[3],
+                    p_codec_info[4], p_codec_info[5], p_codec_info[6]);
+
+            memcpy(p_sink->codec_caps, p_codec_info, AVDT_CODEC_SIZE);
+            p_sink->codec_type = codec_type;
+            p_sink->sep_info_idx = *p_sep_info_idx;
+            p_sink->seid = seid;
+            p_sink->num_protect = *p_num_protect;
+            memcpy(p_sink->protect_info, p_protect_info, BTA_AV_CP_INFO_LEN);
+        }
+        else
+        {
+            APPL_TRACE_ERROR0("bta_av_co_audio_getconfig no more room for SNK info");
+        }
+    }
+
+    /* If last SNK get capabilities or all supported codec capa retrieved */
+    if ((p_peer->num_rx_snks == p_peer->num_snks) ||
+        (p_peer->num_sup_snks == BTA_AV_CO_NUM_ELEMENTS(p_peer->snks)))
+    {
+        APPL_TRACE_DEBUG0("bta_av_co_audio_getconfig last sink reached");
+
+        /* Protect access to bta_av_co_cb.codec_cfg */
+        GKI_disable();
+
+        /* Find a sink that matches the codec config */
+        if (bta_av_co_audio_peer_supports_codec(p_peer, &index))
+        {
+            /* stop fetching caps once we retrieved a supported codec */
+            if (p_peer->acp)
+            {
+                *p_sep_info_idx = p_peer->num_seps;
+                APPL_TRACE_EVENT0("no need to fetch more SEPs");
+            }
+
+            p_sink = &p_peer->snks[index];
+
+            /* Build the codec configuration for this sink */
+            if (bta_av_co_audio_codec_build_config(p_sink->codec_caps, codec_cfg))
+            {
+                APPL_TRACE_DEBUG6("bta_av_co_audio_getconfig reconfig p_codec_info[%x:%x:%x:%x:%x:%x]",
+                        codec_cfg[1], codec_cfg[2], codec_cfg[3],
+                        codec_cfg[4], codec_cfg[5], codec_cfg[6]);
+
+                /* Save the new configuration */
+                p_peer->p_snk = p_sink;
+                memcpy(p_peer->codec_cfg, codec_cfg, AVDT_CODEC_SIZE);
+
+                /* By default, no content protection */
+                *p_num_protect = 0;
+
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+                /* Check if this sink supports SCMS */
+                if (bta_av_co_audio_sink_has_scmst(p_sink))
+                {
+                    p_peer->cp_active = TRUE;
+                    bta_av_co_cb.cp.active = TRUE;
+                    *p_num_protect = BTA_AV_CP_INFO_LEN;
+                    memcpy(p_protect_info, bta_av_co_cp_scmst, BTA_AV_CP_INFO_LEN);
+                }
+                else
+                {
+                    p_peer->cp_active = FALSE;
+                    bta_av_co_cb.cp.active = FALSE;
+                }
+#endif
+
+                /* If acceptor -> reconfig otherwise reply for configuration */
+                if (p_peer->acp)
+                {
+                    if (p_peer->recfg_needed)
+                    {
+                        APPL_TRACE_DEBUG1("bta_av_co_audio_getconfig call BTA_AvReconfig(x%x)", hndl);
+                        BTA_AvReconfig(hndl, TRUE, p_sink->sep_info_idx, p_peer->codec_cfg, *p_num_protect, (UINT8 *)bta_av_co_cp_scmst);
+                    }
+                }
+                else
+                {
+                    *p_sep_info_idx = p_sink->sep_info_idx;
+                    memcpy(p_codec_info, p_peer->codec_cfg, AVDT_CODEC_SIZE);
+                }
+                result =  A2D_SUCCESS;
+            }
+        }
+        /* Protect access to bta_av_co_cb.codec_cfg */
+        GKI_enable();
+    }
+    return result;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_setconfig
+ **
+ ** Description      This callout function is executed by AV to set the codec and
+ **                  content protection configuration of the audio stream.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+BTA_API void bta_av_co_audio_setconfig(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+        UINT8 *p_codec_info, UINT8 seid, BD_ADDR addr, UINT8 num_protect, UINT8 *p_protect_info)
+
+{
+    tBTA_AV_CO_PEER *p_peer;
+    UINT8 status = A2D_SUCCESS;
+    UINT8 category = A2D_SUCCESS;
+    BOOLEAN recfg_needed = FALSE;
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG6("bta_av_co_audio_setconfig p_codec_info[%x:%x:%x:%x:%x:%x]",
+            p_codec_info[1], p_codec_info[2], p_codec_info[3],
+            p_codec_info[4], p_codec_info[5], p_codec_info[6]);
+    APPL_TRACE_DEBUG4("num_protect:0x%02x protect_info:0x%02x%02x%02x",
+        num_protect, p_protect_info[0], p_protect_info[1], p_protect_info[2]);
+
+    /* Retrieve the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_setconfig could not find peer entry");
+
+        /* Call call-in rejecting the configuration */
+        bta_av_ci_setconfig(hndl, A2D_BUSY, AVDT_ASC_CODEC, 0, NULL, FALSE);
+        return;
+    }
+
+    /* Sanity check: should not be opened at this point */
+    if (p_peer->opened)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_setconfig peer already in use");
+    }
+
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+    if (num_protect != 0)
+    {
+        /* If CP is supported */
+        if ((num_protect != 1) ||
+            (bta_av_co_cp_is_scmst(p_protect_info) == FALSE))
+        {
+            APPL_TRACE_ERROR0("bta_av_co_audio_setconfig wrong CP configuration");
+            status = A2D_BAD_CP_TYPE;
+            category = AVDT_ASC_PROTECT;
+        }
+    }
+#else
+    /* Do not support content protection for the time being */
+    if (num_protect != 0)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_setconfig wrong CP configuration");
+        status = A2D_BAD_CP_TYPE;
+        category = AVDT_ASC_PROTECT;
+    }
+#endif
+    if (status == A2D_SUCCESS)
+    {
+        /* Check if codec configuration is supported */
+        if (bta_av_co_audio_media_supports_config(codec_type, p_codec_info))
+        {
+            /* Protect access to bta_av_co_cb.codec_cfg */
+            GKI_disable();
+
+            /* Check if the configuration matches the current codec config */
+            switch (bta_av_co_cb.codec_cfg.id)
+            {
+            case BTIF_AV_CODEC_SBC:
+                if ((codec_type != BTA_AV_CODEC_SBC) || memcmp(p_codec_info, bta_av_co_cb.codec_cfg.info, 5))
+                {
+                    recfg_needed = TRUE;
+                }
+                else if ((num_protect == 1) && (!bta_av_co_cb.cp.active))
+                {
+                    recfg_needed = TRUE;
+                }
+
+                /* if remote side requests a restricted notify sinks preferred bitpool range as all other params are
+                   already checked for validify */
+                APPL_TRACE_EVENT2("remote peer setconfig bitpool range [%d:%d]",
+                   p_codec_info[BTA_AV_CO_SBC_MIN_BITPOOL_OFF],
+                   p_codec_info[BTA_AV_CO_SBC_MAX_BITPOOL_OFF] );
+
+                bta_av_co_cb.codec_cfg_setconfig.id = BTIF_AV_CODEC_SBC;
+                memcpy(bta_av_co_cb.codec_cfg_setconfig.info, p_codec_info, AVDT_CODEC_SIZE);
+                break;
+
+
+            default:
+                APPL_TRACE_ERROR1("bta_av_co_audio_setconfig unsupported cid %d", bta_av_co_cb.codec_cfg.id);
+                recfg_needed = TRUE;
+                break;
+            }
+            /* Protect access to bta_av_co_cb.codec_cfg */
+            GKI_enable();
+        }
+        else
+        {
+            category = AVDT_ASC_CODEC;
+            status = A2D_WRONG_CODEC;
+        }
+    }
+
+    if (status != A2D_SUCCESS)
+    {
+        APPL_TRACE_DEBUG2("bta_av_co_audio_setconfig reject s=%d c=%d", status, category);
+
+        /* Call call-in rejecting the configuration */
+        bta_av_ci_setconfig(hndl, status, category, 0, NULL, FALSE);
+    }
+    else
+    {
+        /* Mark that this is an acceptor peer */
+        p_peer->acp = TRUE;
+        p_peer->recfg_needed = recfg_needed;
+
+        APPL_TRACE_DEBUG1("bta_av_co_audio_setconfig accept reconf=%d", recfg_needed);
+
+        /* Call call-in accepting the configuration */
+        bta_av_ci_setconfig(hndl, A2D_SUCCESS, A2D_SUCCESS, 0, NULL, recfg_needed);
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_open
+ **
+ ** Description      This function is called by AV when the audio stream connection
+ **                  is opened.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+BTA_API void bta_av_co_audio_open(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type, UINT8 *p_codec_info,
+        UINT16 mtu)
+{
+    tBTA_AV_CO_PEER *p_peer;
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG2("bta_av_co_audio_open mtu:%d codec_type:%d", mtu, codec_type);
+
+    /* Retrieve the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_setconfig could not find peer entry");
+    }
+    else
+    {
+        p_peer->opened = TRUE;
+        p_peer->mtu = mtu;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_close
+ **
+ ** Description      This function is called by AV when the audio stream connection
+ **                  is closed.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+BTA_API void bta_av_co_audio_close(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type, UINT16 mtu)
+
+{
+    tBTA_AV_CO_PEER *p_peer;
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG0("bta_av_co_audio_close");
+
+    /* Retrieve the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer)
+    {
+        /* Mark the peer closed and clean the peer info */
+        memset(p_peer, 0, sizeof(*p_peer));
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_close could not find peer entry");
+    }
+
+    /* reset remote preference through setconfig */
+    bta_av_co_cb.codec_cfg_setconfig.id = BTIF_AV_CODEC_NONE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_start
+ **
+ ** Description      This function is called by AV when the audio streaming data
+ **                  transfer is started.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+BTA_API void bta_av_co_audio_start(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type,
+        UINT8 *p_codec_info, BOOLEAN *p_no_rtp_hdr)
+{
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG0("bta_av_co_audio_start");
+
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_stop
+ **
+ ** Description      This function is called by AV when the audio streaming data
+ **                  transfer is stopped.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+BTA_API extern void bta_av_co_audio_stop(tBTA_AV_HNDL hndl, tBTA_AV_CODEC codec_type)
+{
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG0("bta_av_co_audio_stop");
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_src_data_path
+ **
+ ** Description      This function is called to manage data transfer from
+ **                  the audio codec to AVDTP.
+ **
+ ** Returns          Pointer to the GKI buffer to send, NULL if no buffer to send
+ **
+ *******************************************************************************/
+BTA_API void * bta_av_co_audio_src_data_path(tBTA_AV_CODEC codec_type, UINT32 *p_len,
+        UINT32 *p_timestamp)
+{
+    BT_HDR *p_buf;
+    FUNC_TRACE();
+
+    p_buf = btif_media_aa_readbuf();
+    if (p_buf != NULL)
+    {
+        switch (codec_type)
+        {
+        case BTA_AV_CODEC_SBC:
+            /* In media packet SBC, the following information is available:
+             * p_buf->layer_specific : number of SBC frames in the packet
+             * p_buf->word[0] : timestamp
+             */
+            /* Retrieve the timestamp information from the media packet */
+            *p_timestamp = *((UINT32 *) (p_buf + 1));
+
+            /* Set up packet header */
+            bta_av_sbc_bld_hdr(p_buf, p_buf->layer_specific);
+            break;
+
+
+        default:
+            APPL_TRACE_ERROR1("bta_av_co_audio_src_data_path Unsupported codec type (%d)", codec_type);
+            break;
+        }
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+        {
+            UINT8 *p;
+            if (bta_av_co_cp_is_active())
+            {
+                p_buf->len++;
+                p_buf->offset--;
+                p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+                *p = bta_av_co_cp_get_flag();
+            }
+        }
+#endif
+    }
+    return p_buf;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_drop
+ **
+ ** Description      An Audio packet is dropped. .
+ **                  It's very likely that the connected headset with this handle
+ **                  is moved far away. The implementation may want to reduce
+ **                  the encoder bit rate setting to reduce the packet size.
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void bta_av_co_audio_drop(tBTA_AV_HNDL hndl)
+{
+    FUNC_TRACE();
+
+    APPL_TRACE_ERROR1("bta_av_co_audio_drop dropped: x%x", hndl);
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_delay
+ **
+ ** Description      This function is called by AV when the audio stream connection
+ **                  needs to send the initial delay report to the connected SRC.
+ **
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void bta_av_co_audio_delay(tBTA_AV_HNDL hndl, UINT16 delay)
+{
+    FUNC_TRACE();
+
+    APPL_TRACE_ERROR2("bta_av_co_audio_delay handle: x%x, delay:0x%x", hndl, delay);
+}
+
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_build_config
+ **
+ ** Description      Build the codec configuration
+ **
+ ** Returns          TRUE if the codec was built successfully, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_codec_build_config(const UINT8 *p_codec_caps, UINT8 *p_codec_cfg)
+{
+    FUNC_TRACE();
+
+    memset(p_codec_cfg, 0, AVDT_CODEC_SIZE);
+
+    switch (bta_av_co_cb.codec_cfg.id)
+    {
+    case BTIF_AV_CODEC_SBC:
+        /*  only copy the relevant portions for this codec to avoid issues when
+            comparing codec configs covering larger codec sets than SBC (7 bytes) */
+        memcpy(p_codec_cfg, bta_av_co_cb.codec_cfg.info, BTA_AV_CO_SBC_MAX_BITPOOL_OFF+1);
+
+        /* Update the bit pool boundaries with the codec capabilities */
+        p_codec_cfg[BTA_AV_CO_SBC_MIN_BITPOOL_OFF] = p_codec_caps[BTA_AV_CO_SBC_MIN_BITPOOL_OFF];
+        p_codec_cfg[BTA_AV_CO_SBC_MAX_BITPOOL_OFF] = p_codec_caps[BTA_AV_CO_SBC_MAX_BITPOOL_OFF];
+
+        APPL_TRACE_EVENT2("bta_av_co_audio_codec_build_config : bitpool min %d, max %d",
+                    p_codec_cfg[BTA_AV_CO_SBC_MIN_BITPOOL_OFF],
+                    p_codec_caps[BTA_AV_CO_SBC_MAX_BITPOOL_OFF]);
+        break;
+    default:
+        APPL_TRACE_ERROR1("bta_av_co_audio_codec_build_config: unsupported codec id %d", bta_av_co_cb.codec_cfg.id);
+        return FALSE;
+        break;
+    }
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_cfg_matches_caps
+ **
+ ** Description      Check if a codec config matches a codec capabilities
+ **
+ ** Returns          TRUE if it codec config is supported, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_codec_cfg_matches_caps(UINT8 codec_id, const UINT8 *p_codec_caps, const UINT8 *p_codec_cfg)
+{
+    FUNC_TRACE();
+
+    switch(codec_id)
+    {
+    case BTIF_AV_CODEC_SBC:
+
+        APPL_TRACE_EVENT4("bta_av_co_audio_codec_cfg_matches_caps : min %d/%d max %d/%d",
+           p_codec_caps[BTA_AV_CO_SBC_MIN_BITPOOL_OFF],
+           p_codec_cfg[BTA_AV_CO_SBC_MIN_BITPOOL_OFF],
+           p_codec_caps[BTA_AV_CO_SBC_MAX_BITPOOL_OFF],
+           p_codec_cfg[BTA_AV_CO_SBC_MAX_BITPOOL_OFF]);
+
+        /* Must match all items exactly except bitpool boundaries which can be adjusted */
+        if (!((p_codec_caps[BTA_AV_CO_SBC_FREQ_CHAN_OFF] & p_codec_cfg[BTA_AV_CO_SBC_FREQ_CHAN_OFF]) &&
+              (p_codec_caps[BTA_AV_CO_SBC_BLOCK_BAND_OFF] & p_codec_cfg[BTA_AV_CO_SBC_BLOCK_BAND_OFF])))
+        {
+            APPL_TRACE_EVENT4("FALSE %x %x %x %x",
+                    p_codec_caps[BTA_AV_CO_SBC_FREQ_CHAN_OFF],
+                    p_codec_cfg[BTA_AV_CO_SBC_FREQ_CHAN_OFF],
+                    p_codec_caps[BTA_AV_CO_SBC_BLOCK_BAND_OFF],
+                    p_codec_cfg[BTA_AV_CO_SBC_BLOCK_BAND_OFF]);
+            return FALSE;
+        }
+        break;
+
+
+    default:
+        APPL_TRACE_ERROR1("bta_av_co_audio_codec_cfg_matches_caps: unsupported codec id %d", codec_id);
+        return FALSE;
+        break;
+    }
+    APPL_TRACE_EVENT0("TRUE");
+
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_match
+ **
+ ** Description      Check if a codec capabilities supports the codec config
+ **
+ ** Returns          TRUE if the connection supports this codec, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_codec_match(const UINT8 *p_codec_caps)
+{
+    FUNC_TRACE();
+
+    return bta_av_co_audio_codec_cfg_matches_caps(bta_av_co_cb.codec_cfg.id, p_codec_caps, bta_av_co_cb.codec_cfg.info);
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_peer_reset_config
+ **
+ ** Description      Reset the peer codec configuration
+ **
+ ** Returns          Nothing
+ **
+ *******************************************************************************/
+static void bta_av_co_audio_peer_reset_config(tBTA_AV_CO_PEER *p_peer)
+{
+    FUNC_TRACE();
+
+    /* Indicate that there is no currently selected sink */
+    p_peer->p_snk = NULL;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_is_scmst
+ **
+ ** Description      Check if a content protection service is SCMS-T
+ **
+ ** Returns          TRUE if this CP is SCMS-T, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_cp_is_scmst(const UINT8 *p_protectinfo)
+{
+    UINT16 cp_id;
+    FUNC_TRACE();
+
+    if (*p_protectinfo >= BTA_AV_CP_LOSC)
+    {
+        p_protectinfo++;
+        STREAM_TO_UINT16(cp_id, p_protectinfo);
+        if (cp_id == BTA_AV_CP_SCMS_T_ID)
+        {
+            APPL_TRACE_DEBUG0("bta_av_co_cp_is_scmst: SCMS-T found");
+            return TRUE;
+        }
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_sink_has_scmst
+ **
+ ** Description      Check if a sink supports SCMS-T
+ **
+ ** Returns          TRUE if the sink supports this CP, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_sink_has_scmst(const tBTA_AV_CO_SINK *p_sink)
+{
+    UINT8 index;
+    const UINT8 *p;
+    FUNC_TRACE();
+
+    /* Check if sink supports SCMS-T */
+    index = p_sink->num_protect;
+    p = &p_sink->protect_info[0];
+
+    while (index)
+    {
+        if (bta_av_co_cp_is_scmst(p))
+        {
+            return TRUE;
+        }
+        /* Move to the next SC */
+        p += *p + 1;
+        /* Decrement the SC counter */
+        index--;
+    }
+    APPL_TRACE_DEBUG0("bta_av_co_audio_sink_has_scmst: SCMS-T not found");
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_sink_supports_cp
+ **
+ ** Description      Check if a sink supports the current content protection
+ **
+ ** Returns          TRUE if the sink supports this CP, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_sink_supports_cp(const tBTA_AV_CO_SINK *p_sink)
+{
+    FUNC_TRACE();
+
+    /* Check if content protection is enabled for this stream */
+    if (bta_av_co_cp_get_flag() != BTA_AV_CP_SCMS_COPY_FREE)
+    {
+        return bta_av_co_audio_sink_has_scmst(p_sink);
+    }
+    else
+    {
+        APPL_TRACE_DEBUG0("bta_av_co_audio_sink_supports_cp: not required");
+        return TRUE;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_peer_supports_codec
+ **
+ ** Description      Check if a connection supports the codec config
+ **
+ ** Returns          TRUE if the connection supports this codec, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_peer_supports_codec(tBTA_AV_CO_PEER *p_peer, UINT8 *p_snk_index)
+{
+    int index;
+    UINT8 codec_type;
+    FUNC_TRACE();
+
+    /* Configure the codec type to look for */
+    codec_type = bta_av_co_cb.codec_cfg.id;
+
+
+    for (index = 0; index < p_peer->num_sup_snks; index++)
+    {
+        if (p_peer->snks[index].codec_type == codec_type)
+        {
+            switch (bta_av_co_cb.codec_cfg.id)
+            {
+            case BTIF_AV_CODEC_SBC:
+                if (p_snk_index) *p_snk_index = index;
+                return bta_av_co_audio_codec_match(p_peer->snks[index].codec_caps);
+                break;
+
+
+            default:
+                APPL_TRACE_ERROR1("bta_av_co_audio_peer_supports_codec: unsupported codec id %d", bta_av_co_cb.codec_cfg.id);
+                return FALSE;
+                break;
+            }
+        }
+    }
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_media_supports_config
+ **
+ ** Description      Check if the media source supports a given configuration
+ **
+ ** Returns          TRUE if the media source supports this config, FALSE otherwise
+ **
+ *******************************************************************************/
+static BOOLEAN bta_av_co_audio_media_supports_config(UINT8 codec_type, const UINT8 *p_codec_cfg)
+{
+    FUNC_TRACE();
+
+    switch (codec_type)
+    {
+    case BTA_AV_CODEC_SBC:
+        if (bta_av_sbc_cfg_in_cap((UINT8 *)p_codec_cfg, (tA2D_SBC_CIE *)&bta_av_co_sbc_caps))
+        {
+            return FALSE;
+        }
+        break;
+
+
+    default:
+        APPL_TRACE_ERROR1("bta_av_co_audio_media_supports_config unsupported codec type %d", codec_type);
+        return FALSE;
+        break;
+    }
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_supported
+ **
+ ** Description      Check if all opened connections are compatible with a codec
+ **                  configuration and content protection
+ **
+ ** Returns          TRUE if all opened devices support this codec, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_codec_supported(tBTIF_STATUS *p_status)
+{
+    UINT8 index;
+    UINT8 snk_index;
+    tBTA_AV_CO_PEER *p_peer;
+    tBTA_AV_CO_SINK *p_sink;
+    UINT8 codec_cfg[AVDT_CODEC_SIZE];
+    UINT8 num_protect = 0;
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+    BOOLEAN cp_active;
+#endif
+
+    FUNC_TRACE();
+
+    APPL_TRACE_DEBUG0("bta_av_co_audio_codec_supported");
+
+    /* Check AV feeding is supported */
+    *p_status = BTIF_ERROR_SRV_AV_FEEDING_NOT_SUPPORTED;
+
+    for (index = 0; index < BTA_AV_CO_NUM_ELEMENTS(bta_av_co_cb.peers); index++)
+    {
+        p_peer = &bta_av_co_cb.peers[index];
+        if (p_peer->opened)
+        {
+            if (bta_av_co_audio_peer_supports_codec(p_peer, &snk_index))
+            {
+                p_sink = &p_peer->snks[snk_index];
+
+                /* Check that this sink is compatible with the CP */
+                if (!bta_av_co_audio_sink_supports_cp(p_sink))
+                {
+                    APPL_TRACE_DEBUG2("bta_av_co_audio_codec_supported sink %d of peer %d doesn't support cp",
+                            snk_index, index);
+                    *p_status = BTIF_ERROR_SRV_AV_CP_NOT_SUPPORTED;
+                    return FALSE;
+                }
+
+                /* Build the codec configuration for this sink */
+                if (bta_av_co_audio_codec_build_config(p_sink->codec_caps, codec_cfg))
+                {
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+                    /* Check if this sink supports SCMS */
+                    cp_active = bta_av_co_audio_sink_has_scmst(p_sink);
+#endif
+                    /* Check if this is a new configuration (new sink or new config) */
+                    if ((p_sink != p_peer->p_snk) ||
+                        (memcmp(codec_cfg, p_peer->codec_cfg, AVDT_CODEC_SIZE))
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+                        || (p_peer->cp_active != cp_active)
+#endif
+                        )
+                    {
+                        /* Save the new configuration */
+                        p_peer->p_snk = p_sink;
+                        memcpy(p_peer->codec_cfg, codec_cfg, AVDT_CODEC_SIZE);
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+                        p_peer->cp_active = cp_active;
+                        if (p_peer->cp_active)
+                        {
+                            bta_av_co_cb.cp.active = TRUE;
+                            num_protect = BTA_AV_CP_INFO_LEN;
+                        }
+                        else
+                        {
+                            bta_av_co_cb.cp.active = FALSE;
+                        }
+#endif
+                        APPL_TRACE_DEBUG1("bta_av_co_audio_codec_supported call BTA_AvReconfig(x%x)", BTA_AV_CO_AUDIO_INDX_TO_HNDL(index));
+                        BTA_AvReconfig(BTA_AV_CO_AUDIO_INDX_TO_HNDL(index), TRUE, p_sink->sep_info_idx,
+                                p_peer->codec_cfg, num_protect, (UINT8 *)bta_av_co_cp_scmst);
+                    }
+                }
+            }
+            else
+            {
+                APPL_TRACE_DEBUG1("bta_av_co_audio_codec_supported index %d doesn't support codec", index);
+                return FALSE;
+            }
+        }
+    }
+
+    *p_status = BTIF_SUCCESS;
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_reset
+ **
+ ** Description      Reset the current codec configuration
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void bta_av_co_audio_codec_reset(void)
+{
+    GKI_disable();
+    FUNC_TRACE();
+
+    /* Reset the current configuration to SBC */
+    bta_av_co_cb.codec_cfg.id = BTIF_AV_CODEC_SBC;
+
+    if (A2D_BldSbcInfo(A2D_MEDIA_TYPE_AUDIO, (tA2D_SBC_CIE *)&btif_av_sbc_default_config, bta_av_co_cb.codec_cfg.info) != A2D_SUCCESS)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_codec_reset A2D_BldSbcInfo failed");
+    }
+
+    GKI_enable();
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_set_codec
+ **
+ ** Description      Set the current codec configuration from the feeding type.
+ **                  This function is starting to modify the configuration, it
+ **                  should be protected.
+ **
+ ** Returns          TRUE if successful, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_set_codec(const tBTIF_AV_MEDIA_FEEDINGS *p_feeding, tBTIF_STATUS *p_status)
+{
+    tA2D_SBC_CIE sbc_config;
+    tBTIF_AV_CODEC_INFO new_cfg;
+
+    FUNC_TRACE();
+
+    /* Check AV feeding is supported */
+    *p_status = BTIF_ERROR_SRV_AV_FEEDING_NOT_SUPPORTED;
+
+    APPL_TRACE_DEBUG1("bta_av_co_audio_set_codec cid=%d", p_feeding->format);
+
+    /* Supported codecs */
+    switch (p_feeding->format)
+    {
+    case BTIF_AV_CODEC_PCM:
+        new_cfg.id = BTIF_AV_CODEC_SBC;
+
+        sbc_config = btif_av_sbc_default_config;
+        if ((p_feeding->cfg.pcm.num_channel != 1) &&
+            (p_feeding->cfg.pcm.num_channel != 2))
+        {
+            APPL_TRACE_ERROR0("bta_av_co_audio_set_codec PCM channel number unsupported");
+            return FALSE;
+        }
+        if ((p_feeding->cfg.pcm.bit_per_sample != 8) &&
+            (p_feeding->cfg.pcm.bit_per_sample != 16))
+        {
+            APPL_TRACE_ERROR0("bta_av_co_audio_set_codec PCM sample size unsupported");
+            return FALSE;
+        }
+        switch (p_feeding->cfg.pcm.sampling_freq)
+        {
+        case 8000:
+        case 12000:
+        case 16000:
+        case 24000:
+        case 32000:
+        case 48000:
+            sbc_config.samp_freq = A2D_SBC_IE_SAMP_FREQ_48;
+            break;
+
+        case 11025:
+        case 22050:
+        case 44100:
+            sbc_config.samp_freq = A2D_SBC_IE_SAMP_FREQ_44;
+            break;
+        default:
+            APPL_TRACE_ERROR0("bta_av_co_audio_set_codec PCM sampling frequency unsupported");
+            return FALSE;
+            break;
+        }
+        /* Build the codec config */
+        if (A2D_BldSbcInfo(A2D_MEDIA_TYPE_AUDIO, &sbc_config, new_cfg.info) != A2D_SUCCESS)
+        {
+            APPL_TRACE_ERROR0("bta_av_co_audio_set_codec A2D_BldSbcInfo failed");
+            return FALSE;
+        }
+        break;
+
+
+    default:
+        APPL_TRACE_ERROR0("bta_av_co_audio_set_codec Feeding format unsupported");
+        return FALSE;
+        break;
+    }
+
+    /* The new config was correctly built */
+    bta_av_co_cb.codec_cfg = new_cfg;
+
+
+    /* Check all devices support it */
+    *p_status = BTIF_SUCCESS;
+    return bta_av_co_audio_codec_supported(p_status);
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_get_sbc_config
+ **
+ ** Description      Retrieves the SBC codec configuration.  If the codec in use
+ **                  is not SBC, return the default SBC codec configuration.
+ **
+ ** Returns          TRUE if codec is SBC, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_get_sbc_config(tA2D_SBC_CIE *p_sbc_config, UINT16 *p_minmtu)
+{
+    BOOLEAN result = FALSE;
+    UINT8 index, jndex;
+    tBTA_AV_CO_PEER *p_peer;
+    tBTA_AV_CO_SINK *p_sink;
+
+    APPL_TRACE_EVENT1("bta_av_co_cb.codec_cfg.id : codec 0x%x", bta_av_co_cb.codec_cfg.id);
+
+    /* Minimum MTU is by default very large */
+    *p_minmtu = 0xFFFF;
+
+    GKI_disable();
+    if (bta_av_co_cb.codec_cfg.id == BTIF_AV_CODEC_SBC)
+    {
+        if (A2D_ParsSbcInfo(p_sbc_config, bta_av_co_cb.codec_cfg.info, FALSE) == A2D_SUCCESS)
+        {
+            for (index = 0; index < BTA_AV_CO_NUM_ELEMENTS(bta_av_co_cb.peers); index++)
+            {
+                p_peer = &bta_av_co_cb.peers[index];
+                if (p_peer->opened)
+                {
+                    if (p_peer->mtu < *p_minmtu)
+                    {
+                        *p_minmtu = p_peer->mtu;
+                    }
+                    for (jndex = 0; jndex < p_peer->num_sup_snks; jndex++)
+                    {
+                        p_sink = &p_peer->snks[jndex];
+                        if (p_sink->codec_type == A2D_MEDIA_CT_SBC)
+                        {
+                            /* Update the bitpool boundaries of the current config */
+                            p_sbc_config->min_bitpool =
+                               BTA_AV_CO_MAX(p_sink->codec_caps[BTA_AV_CO_SBC_MIN_BITPOOL_OFF],
+                                             p_sbc_config->min_bitpool);
+                            p_sbc_config->max_bitpool =
+                               BTA_AV_CO_MIN(p_sink->codec_caps[BTA_AV_CO_SBC_MAX_BITPOOL_OFF],
+                                             p_sbc_config->max_bitpool);
+                            APPL_TRACE_EVENT2("bta_av_co_audio_get_sbc_config : sink bitpool min %d, max %d",
+                                 p_sbc_config->min_bitpool, p_sbc_config->max_bitpool);
+                            break;
+                        }
+                    }
+                }
+            }
+            result = TRUE;
+        }
+    }
+
+    if (!result)
+    {
+        /* Not SBC, still return the default values */
+        *p_sbc_config = btif_av_sbc_default_config;
+    }
+    GKI_enable();
+
+    return result;
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_discard_config
+ **
+ ** Description      Discard the codec configuration of a connection
+ **
+ ** Returns          Nothing
+ **
+ *******************************************************************************/
+void bta_av_co_audio_discard_config(tBTA_AV_HNDL hndl)
+{
+    tBTA_AV_CO_PEER *p_peer;
+
+    FUNC_TRACE();
+
+    /* Find the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_audio_discard_config could not find peer entry");
+        return;
+    }
+
+    /* Reset the peer codec configuration */
+    bta_av_co_audio_peer_reset_config(p_peer);
+}
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_init
+ **
+ ** Description      Initialization
+ **
+ ** Returns          Nothing
+ **
+ *******************************************************************************/
+void bta_av_co_init(void)
+{
+    FUNC_TRACE();
+
+    /* Reset the control block */
+    memset(&bta_av_co_cb, 0, sizeof(bta_av_co_cb));
+
+    bta_av_co_cb.codec_cfg_setconfig.id = BTIF_AV_CODEC_NONE;
+
+#if defined(BTA_AV_CO_CP_SCMS_T) && (BTA_AV_CO_CP_SCMS_T == TRUE)
+    bta_av_co_cp_set_flag(BTA_AV_CP_SCMS_COPY_NEVER);
+#else
+    bta_av_co_cp_set_flag(BTA_AV_CP_SCMS_COPY_FREE);
+#endif
+
+    /* Reset the current config */
+    bta_av_co_audio_codec_reset();
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_peer_cp_supported
+ **
+ ** Description      Checks if the peer supports CP
+ **
+ ** Returns          TRUE if the peer supports CP
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_peer_cp_supported(tBTA_AV_HNDL hndl)
+{
+    tBTA_AV_CO_PEER *p_peer;
+    tBTA_AV_CO_SINK *p_sink;
+    UINT8 index;
+
+    FUNC_TRACE();
+
+    /* Find the peer info */
+    p_peer = bta_av_co_get_peer(hndl);
+    if (p_peer == NULL)
+    {
+        APPL_TRACE_ERROR0("bta_av_co_peer_cp_supported could not find peer entry");
+        return FALSE;
+    }
+
+    for (index = 0; index < p_peer->num_sup_snks; index++)
+    {
+        p_sink = &p_peer->snks[index];
+        if (p_sink->codec_type == A2D_MEDIA_CT_SBC)
+        {
+            return bta_av_co_audio_sink_has_scmst(p_sink);
+        }
+    }
+    APPL_TRACE_ERROR0("bta_av_co_peer_cp_supported did not find SBC sink");
+    return FALSE;
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_get_remote_bitpool_pref
+ **
+ ** Description      Check if remote side did a setconfig within the limits
+ **                  of our exported bitpool range. If set we will set the
+ **                  remote preference.
+ **
+ ** Returns          TRUE if config set, FALSE otherwize
+ **
+ *******************************************************************************/
+
+BOOLEAN bta_av_co_get_remote_bitpool_pref(UINT8 *min, UINT8 *max)
+{
+    /* check if remote peer did a set config */
+    if (bta_av_co_cb.codec_cfg_setconfig.id == BTIF_AV_CODEC_NONE)
+        return FALSE;
+
+    *min = bta_av_co_cb.codec_cfg_setconfig.info[BTA_AV_CO_SBC_MIN_BITPOOL_OFF];
+    *max = bta_av_co_cb.codec_cfg_setconfig.info[BTA_AV_CO_SBC_MAX_BITPOOL_OFF];
+
+    return TRUE;
+}
+
+
diff --git a/btif/co/bta_dm_co.c b/btif/co/bta_dm_co.c
new file mode 100644
index 0000000..611af2d
--- /dev/null
+++ b/btif/co/bta_dm_co.c
@@ -0,0 +1,417 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bta_dm_co.h"
+#include "bta_dm_ci.h"
+#if (BTM_OOB_INCLUDED == TRUE)
+#include "btif_dm.h"
+#endif
+/*******************************************************************************
+**
+** Function         bta_dm_co_get_compress_memory
+**
+** Description      This callout function is executed by DM to get memory for compression
+
+** Parameters       id  -  BTA SYS ID
+**                  memory_p - memory return by callout
+**                  memory_size - memory size
+**
+** Returns          TRUE for success, FALSE for fail.
+**
+*******************************************************************************/
+BOOLEAN bta_dm_co_get_compress_memory(tBTA_SYS_ID id, UINT8 **memory_p, UINT32 *memory_size)
+{
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_io_req
+**
+** Description      This callout function is executed by DM to get IO capabilities
+**                  of the local device for the Simple Pairing process
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_io_cap - The local Input/Output capabilities
+**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
+**                  *p_auth_req - TRUE, if MITM protection is required.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data,
+                      tBTA_AUTH_REQ *p_auth_req, BOOLEAN is_orig)
+{
+#if (BTM_OOB_INCLUDED == TRUE)
+    btif_dm_set_oob_for_io_req(p_oob_data);
+#endif
+    BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_oob_data = %d", *p_oob_data);
+    BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_io_cap = %d", *p_io_cap);
+    BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_auth_req = %d", *p_auth_req);
+    BTIF_TRACE_DEBUG1("bta_dm_co_io_req is_orig = %d", is_orig);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_io_rsp
+**
+** Description      This callout function is executed by DM to report IO capabilities
+**                  of the peer device for the Simple Pairing process
+**
+** Parameters       bd_addr  - The peer device
+**                  io_cap - The remote Input/Output capabilities
+**                  oob_data - TRUE, if OOB data is available for the peer device.
+**                  auth_req - TRUE, if MITM protection is required.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap,
+                      tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req)
+{
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_lk_upgrade
+**
+** Description      This callout function is executed by DM to check if the
+**                  platform wants allow link key upgrade
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_upgrade - TRUE, if link key upgrade is desired.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void  bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade )
+{
+}
+
+#if (BTM_OOB_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_co_loc_oob
+**
+** Description      This callout function is executed by DM to report the OOB
+**                  data of the local device for the Simple Pairing process
+**
+** Parameters       valid - TRUE, if the local OOB data is retrieved from LM
+**                  c     - Simple Pairing Hash C
+**                  r     - Simple Pairing Randomnizer R
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r)
+{
+    BTIF_TRACE_DEBUG1("bta_dm_co_loc_oob, valid = %d", valid);
+#ifdef BTIF_DM_OOB_TEST
+    btif_dm_proc_loc_oob(valid, c, r);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_rmt_oob
+**
+** Description      This callout function is executed by DM to request the OOB
+**                  data for the remote device for the Simple Pairing process
+**                  Need to call bta_dm_ci_rmt_oob() in response
+**
+** Parameters       bd_addr  - The peer device
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_rmt_oob(BD_ADDR bd_addr)
+{
+    BT_OCTET16 p_c;
+    BT_OCTET16 p_r;
+    BOOLEAN result = FALSE;
+
+#ifdef BTIF_DM_OOB_TEST
+    result = btif_dm_proc_rmt_oob(bd_addr, p_c, p_r);
+#endif
+
+    BTIF_TRACE_DEBUG1("bta_dm_co_rmt_oob: result=%d",result);
+    bta_dm_ci_rmt_oob(result, bd_addr, p_c, p_r);
+}
+
+#endif /* BTM_OOB_INCLUDED */
+
+
+// REMOVE FOR BLUEDROID ?
+
+#if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE)
+
+/*******************************************************************************
+**
+** Function         btui_sco_codec_callback
+**
+** Description      Callback for btui codec.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btui_sco_codec_callback(UINT16 event, UINT16 sco_handle)
+{
+    bta_dm_sco_ci_data_ready(event, sco_handle);
+}
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_init
+**
+** Description      This function can be used by the phone to initialize audio
+**                  codec or for other initialization purposes before SCO connection
+**                  is opened.
+**
+**
+** Returns          tBTA_DM_SCO_ROUTE_TYPE: SCO routing configuration type.
+**
+*******************************************************************************/
+tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(UINT32 rx_bw, UINT32 tx_bw,
+                                          tBTA_CODEC_INFO * p_codec_type, UINT8 app_id)
+{
+    tBTM_SCO_ROUTE_TYPE route = BTA_DM_SCO_ROUTE_PCM;
+
+    BTIF_TRACE_DEBUG0("bta_dm_sco_co_init");
+
+    /* set up SCO routing configuration if SCO over HCI app ID is used and run time
+        configuration is set to SCO over HCI */
+    /* HS invoke this call-out */
+    if (
+#if (BTA_HS_INCLUDED == TRUE ) && (BTA_HS_INCLUDED == TRUE)
+       (app_id == BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.hs_sco_over_hci) ||
+#endif
+       /* AG invoke this call-out */
+       (app_id != BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.ag_sco_over_hci ))
+    {
+        route = btui_cb.sco_hci = BTA_DM_SCO_ROUTE_HCI;
+    }
+    /* no codec is is used for the SCO data */
+    if (p_codec_type->codec_type == BTA_SCO_CODEC_PCM && route == BTA_DM_SCO_ROUTE_HCI)
+    {
+        /* initialize SCO codec */
+        if (!btui_sco_codec_init(rx_bw, tx_bw))
+        {
+            BTIF_TRACE_ERROR0("codec initialization exception!");
+        }
+    }
+
+    return route;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_open
+**
+** Description      This function is executed when a SCO connection is open.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sco_co_open(UINT16 handle, UINT8 pkt_size, UINT16 event)
+{
+    tBTUI_SCO_CODEC_CFG cfg;
+
+    if (btui_cb.sco_hci)
+    {
+        BTIF_TRACE_DEBUG2("bta_dm_sco_co_open handle:%d pkt_size:%d", handle, pkt_size);
+        /* use dedicated SCO buffer pool for SCO TX data */
+        cfg.pool_id = HCI_SCO_POOL_ID;
+        cfg.p_cback = btui_sco_codec_callback;
+        cfg.pkt_size = pkt_size;
+        cfg.cb_event = event;
+        /* open and start the codec */
+        btui_sco_codec_open(&cfg);
+        btui_sco_codec_start(handle);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_close
+**
+** Description      This function is called when a SCO connection is closed
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sco_co_close(void)
+{
+    if (btui_cb.sco_hci)
+    {
+        BTIF_TRACE_DEBUG0("bta_dm_sco_co_close close codec");
+        /* close sco codec */
+        btui_sco_codec_close();
+
+        btui_cb.sco_hci = FALSE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_in_data
+**
+** Description      This function is called to send incoming SCO data to application.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sco_co_in_data(BT_HDR  *p_buf)
+{
+    if (btui_cfg.sco_use_mic)
+        btui_sco_codec_inqdata (p_buf);
+    else
+        GKI_freebuf(p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_sco_co_out_data
+**
+** Description      This function is called to send SCO data over HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_dm_sco_co_out_data(BT_HDR  **p_buf)
+{
+    btui_sco_codec_readbuf(p_buf);
+}
+
+#endif /* #if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE)*/
+
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         bta_dm_co_le_io_key_req
+**
+** Description      This callout function is executed by DM to get BLE key information
+**                  before SMP pairing gets going.
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_max_key_size - max key size local device supported.
+**                  *p_init_key - initiator keys.
+**                  *p_resp_key - responder keys.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_le_io_key_req(BD_ADDR bd_addr, UINT8 *p_max_key_size,
+                             tBTA_LE_KEY_TYPE *p_init_key,
+                             tBTA_LE_KEY_TYPE  *p_resp_key )
+{
+    BTIF_TRACE_ERROR0("##################################");
+    BTIF_TRACE_ERROR0("bta_dm_co_le_io_key_req: only setting max size to 16");
+    BTIF_TRACE_ERROR0("##################################");
+    *p_max_key_size = 16;
+    *p_init_key = *p_resp_key =
+                  (BTA_LE_KEY_PENC|BTA_LE_KEY_PID|BTA_LE_KEY_PCSRK|BTA_LE_KEY_LENC|BTA_LE_KEY_LID|BTA_LE_KEY_LCSRK);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_ble_local_key_reload
+**
+** Description      This callout function is to load the local BLE keys if available
+**                  on the device.
+**
+** Parameters       none
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_ble_load_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er,
+                                   tBTA_BLE_LOCAL_ID_KEYS *p_id_keys)
+{
+    BTIF_TRACE_ERROR0("##################################");
+    BTIF_TRACE_ERROR0("bta_dm_co_ble_load_local_keys: TBD Load local keys if any are persisted");
+    BTIF_TRACE_ERROR0("##################################");
+}
+
+/*******************************************************************************
+**
+** Function         bta_dm_co_ble_io_req
+**
+** Description      This callout function is executed by DM to get BLE IO capabilities
+**                  before SMP pairing gets going.
+**
+** Parameters       bd_addr  - The peer device
+**                  *p_io_cap - The local Input/Output capabilities
+**                  *p_oob_data - TRUE, if OOB data is available for the peer device.
+**                  *p_auth_req -  Auth request setting (Bonding and MITM required or not)
+**                  *p_max_key_size - max key size local device supported.
+**                  *p_init_key - initiator keys.
+**                  *p_resp_key - responder keys.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void bta_dm_co_ble_io_req(BD_ADDR bd_addr,  tBTA_IO_CAP *p_io_cap,
+                          tBTA_OOB_DATA *p_oob_data,
+                          tBTA_LE_AUTH_REQ *p_auth_req,
+                          UINT8 *p_max_key_size,
+                          tBTA_LE_KEY_TYPE *p_init_key,
+                          tBTA_LE_KEY_TYPE  *p_resp_key )
+{
+    /* if OOB is not supported, this call-out function does not need to do anything
+     * otherwise, look for the OOB data associated with the address and set *p_oob_data accordingly
+     * If the answer can not be obtained right away,
+     * set *p_oob_data to BTA_OOB_UNKNOWN and call bta_dm_ci_io_req() when the answer is available */
+
+    /* *p_auth_req by default is FALSE for devices with NoInputNoOutput; TRUE for other devices. */
+    BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_auth_req=%d ble_authereq=%d", *p_auth_req, bte_appl_cfg.ble_auth_req);
+    BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_io_cap=%d ble_io_cap=%d", *p_io_cap, bte_appl_cfg.ble_io_cap);
+    BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_init_key=%d ble_init_key=%d", *p_init_key, bte_appl_cfg.ble_init_key);
+    BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_resp_key=%d ble_resp_key=%d", *p_resp_key, bte_appl_cfg.ble_resp_key );
+    BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_max_key_size=%d ble_max_key_size=%d", *p_max_key_size, bte_appl_cfg.ble_max_key_size );
+
+    *p_oob_data = FALSE;
+    if (bte_appl_cfg.ble_auth_req)
+        *p_auth_req = bte_appl_cfg.ble_auth_req | (bte_appl_cfg.ble_auth_req & 0x04) | ((*p_auth_req) & 0x04);
+
+    if (bte_appl_cfg.ble_io_cap <=4)
+        *p_io_cap = bte_appl_cfg.ble_io_cap;
+
+    if (bte_appl_cfg.ble_init_key<=7)
+        *p_init_key = bte_appl_cfg.ble_init_key;
+
+    if (bte_appl_cfg.ble_resp_key<=7)
+        *p_resp_key = bte_appl_cfg.ble_resp_key;
+
+    if (bte_appl_cfg.ble_max_key_size<=16)
+        *p_max_key_size = bte_appl_cfg.ble_max_key_size;
+
+}
+
+
+#endif
+
diff --git a/btif/co/bta_fs_co.c b/btif/co/bta_fs_co.c
new file mode 100644
index 0000000..ffc146b
--- /dev/null
+++ b/btif/co/bta_fs_co.c
@@ -0,0 +1,1181 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include <stdio.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/vfs.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <time.h>
+#include <limits.h>
+#include "gki.h"
+#include "bta_fs_co.h"
+#include "bta_fs_ci.h"
+#include <inttypes.h>
+
+#ifndef AID_SYSTEM
+#define AID_SYSTEM        1000
+#define AID_BLUETOOTH     1002
+#define AID_SDCARD_RW     1015
+#define AID_MISC          9998
+#endif
+
+#define FAT_FS 0x4d44
+const unsigned short BT_UID= AID_BLUETOOTH;
+const unsigned short BT_GID= AID_BLUETOOTH;
+
+/* enable additional debugging traces that should be compiled out by default! */
+#ifndef BTA_FS_DEBUG
+#define BTA_FS_DEBUG TRUE
+#define LOG_TAG  "BTA_FS_CO"
+#define LOGI(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#endif
+
+#if (defined BTA_PBS_INCLUDED) && (BTA_PBS_INCLUDED == TRUE)
+extern const tBTA_PBS_CFG bta_pbs_cfg;
+#endif
+
+
+
+static int del_path (const char *path)
+{
+    DIR *dir;
+    struct dirent *de;
+    int ret = 0;
+    char nameBuffer[PATH_MAX] = {0};
+    struct stat statBuffer;
+    BTIF_TRACE_DEBUG1("in del_path for path:%s", path);
+    dir = opendir(path);
+
+    if (dir == NULL) {
+        BTIF_TRACE_DEBUG1("opendir failed on path:%s", path);
+        return -1;
+    }
+
+    char *filenameOffset;
+
+    strncpy(nameBuffer, path, PATH_MAX - 1);
+    strcat(nameBuffer, "/");
+    int nameLen = strlen(nameBuffer);
+    filenameOffset = nameBuffer + nameLen;
+
+    for (;;) {
+        de = readdir(dir);
+
+        if (de == NULL) {
+            BTIF_TRACE_DEBUG1("readdir failed for path:%s", path);
+            //ret = -1;
+            break;
+        }
+
+        if (0 == strcmp(de->d_name, ".") || 0 == strcmp(de->d_name, ".."))
+           continue;
+
+        if((int)strlen(de->d_name) > PATH_MAX - nameLen) {
+            BTIF_TRACE_DEBUG1("d_name len:%d is too big", strlen(de->d_name));
+            ret = -1;
+            break;
+        }
+
+        strcpy(filenameOffset, de->d_name);
+
+        ret = lstat (nameBuffer, &statBuffer);
+
+        if (ret != 0) {
+            BTIF_TRACE_DEBUG1("lstat failed for path:%s", nameBuffer);
+            break;
+        }
+
+        if(S_ISDIR(statBuffer.st_mode)) {
+
+            ret = del_path(nameBuffer);
+            if(ret != 0)
+                break;
+        } else {
+            ret = unlink(nameBuffer);
+            if (ret != 0) {
+                BTIF_TRACE_DEBUG1("unlink failed for path:%s", nameBuffer);
+                break;
+            }
+        }
+    }
+
+    closedir(dir);
+    if(ret == 0) {
+        ret = rmdir(path);
+        BTIF_TRACE_DEBUG2("rmdir return:%d for path:%s", ret, path);
+    }
+
+    return ret;
+
+}
+
+inline int getAccess(int accType, struct stat *buffer, char *p_path)
+{
+
+    struct statfs fsbuffer;
+    int idType;
+
+    if(! buffer)
+	return BTA_FS_CO_FAIL;
+
+    //idType= (buffer->st_uid== BT_UID) ? 1 : (buffer->st_uid== BT_GID) ? 2 : 3;
+    if(buffer->st_uid == BT_UID)
+        idType = 1;
+    else if(buffer->st_gid == BT_GID ||
+            buffer->st_gid == AID_SYSTEM ||
+            buffer->st_gid == AID_MISC ||
+            buffer->st_gid == AID_SDCARD_RW)
+        idType = 2;
+    else idType = 3;
+
+    if(statfs(p_path, &fsbuffer)==0)
+    {
+        if(fsbuffer.f_type == FAT_FS)
+	    return BTA_FS_CO_OK;
+    }
+    else {
+        return BTA_FS_CO_FAIL;
+    }
+
+    switch(accType) {
+        case 4:
+	if(idType== 1) {	//Id is User Id
+	   if(buffer-> st_mode & S_IRUSR)
+	       return BTA_FS_CO_OK;
+	}
+	else if(idType==2) {   //Id is Group Id
+	    if(buffer-> st_mode & S_IRGRP)
+	       return BTA_FS_CO_OK;
+	}
+	else {			//Id is Others
+	    if(buffer-> st_mode & S_IROTH)
+	       return BTA_FS_CO_OK;
+	}
+	break;
+
+	case 6:
+	if(idType== 1) {	//Id is User Id
+	   if((buffer-> st_mode & S_IRUSR) && (buffer-> st_mode & S_IWUSR))
+	       return BTA_FS_CO_OK;
+	}
+	else if(idType==2) {   //Id is Group Id
+	    if((buffer-> st_mode & S_IRGRP) && (buffer-> st_mode & S_IWGRP))
+	       return BTA_FS_CO_OK;
+	}
+	else {			//Id is Others
+	    if((buffer-> st_mode & S_IROTH) && (buffer-> st_mode & S_IWOTH))
+	       return BTA_FS_CO_OK;
+	}
+	break;
+
+	default:
+	return BTA_FS_CO_OK;
+    }
+    BTIF_TRACE_DEBUG0("*************FTP- Access Failed **********");
+    return BTA_FS_CO_EACCES;
+}
+
+
+/*****************************************************************************
+**  Function Declarations
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bta_fs_convert_oflags
+**
+** Description      This function converts the open flags from BTA into MFS.
+**
+** Returns          BTA FS status value.
+**
+*******************************************************************************/
+int bta_fs_convert_bta_oflags(int bta_oflags)
+{
+    int oflags = 0; /* Initially read only */
+
+    /* Only one of these can be set: Read Only, Read/Write, or Write Only */
+    if (bta_oflags & BTA_FS_O_RDWR)
+        oflags |= O_RDWR;
+    else if (bta_oflags & BTA_FS_O_WRONLY)
+        oflags |= O_WRONLY;
+
+    /* OR in any other flags that are set by BTA */
+    if (bta_oflags & BTA_FS_O_CREAT)
+        oflags |= O_CREAT;
+
+    if (bta_oflags & BTA_FS_O_EXCL)
+        oflags |= O_EXCL;
+
+    if (bta_oflags & BTA_FS_O_TRUNC)
+        oflags |= O_TRUNC;
+
+    return (oflags);
+}
+
+
+
+/*******************************************************************************
+ **
+ ** Function        btapp_fs_check_space
+ **
+ ** Description     determines access and if there is enough space for given files size on given path
+ **
+ ** Parameters      p_path  - Fully qualified path and file name.
+ **                           WARNING: file name is stripped off! so it must be present!
+ **                 size    - size of file to put (0 if unavailable or not applicable)
+ **                 app_id  - in case application specific treatement is required (e.g opp versus ftp)
+ ** Returns         0 if enough space, otherwise errno failure codes
+ **
+ *******************************************************************************/
+static int btapp_fs_check_space( const char *p_path, const UINT32 size, const UINT8 app_id )
+{
+
+    unsigned long long max_space;
+    struct statfs fs_buffer;
+    int err = 0;
+    char *p_dir;
+    char *p_end;
+
+    if(size==BTA_FS_LEN_UNKNOWN)
+        return 0;
+    /* fail silently in case of no memory. write will catch if not enough space */
+
+    if (NULL != (p_dir = (char *) GKI_getbuf(strlen(p_path) + 1)))
+    {
+        strcpy(p_dir, p_path);
+        if (NULL != (p_end = strrchr(p_dir, '/')))
+        {
+
+            *p_end = '\0';
+            /* get fs info and calculate available space. if not enough, the fs error EFBIG is returned */
+
+            if (0 == statfs(p_dir, &fs_buffer))
+            {
+
+                max_space = fs_buffer.f_bavail * fs_buffer.f_bsize;
+#if (BTA_FS_DEBUG==TRUE)
+                BTIF_TRACE_DEBUG2("btapp_fs_enough_space(file size: %d): (uint)max_size: %u", size, (UINT32)max_space);
+#endif
+                if (max_space < size)
+                    err = EFBIG;
+            }
+            else
+            {
+                err = errno;
+                BTIF_TRACE_WARNING1("btapp_fs_enough_space(): statfs() failed with err: %d", err);
+            }
+        }
+        else
+        {
+            err = ENOENT;
+        }
+        GKI_freebuf(p_dir);
+    }
+    else
+    {
+        err = ENOMEM;
+    }
+    return err;
+
+} /* btapp_fs_check_access_space() */
+
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_open
+**
+** Description      This function is executed by BTA when a file is opened.
+**                  The phone uses this function to open
+**                  a file for reading or writing.
+**
+** Parameters       p_path  - Fully qualified path and file name.
+**                  oflags  - permissions and mode (see constants above)
+**                  size    - size of file to put (0 if unavailable or not applicable)
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, a file descriptor (int),
+**                        if successful, and an error code (tBTA_FS_CO_STATUS)
+**                        are returned in the call-in function, bta_fs_ci_open().
+**
+*******************************************************************************/
+
+void bta_fs_co_open(const char *p_path, int oflags, UINT32 size, UINT16 evt,
+                    UINT8 app_id)
+{
+
+    tBTA_FS_CO_STATUS  status;
+    UINT32  file_size = 0;
+    struct  stat file_stat;
+    int fd = -1;
+    int err = 0;
+
+    /* Convert BTA oflags into os specific flags */
+    oflags = bta_fs_convert_bta_oflags(oflags);
+
+    /* check available space in case of write access. oflags are in OS format! */
+    if (oflags & (O_RDWR|O_WRONLY))
+    {
+        err = btapp_fs_check_space(p_path, size, app_id);
+    }
+
+    if ( 0==err )
+    {
+        if ((fd = open(p_path, oflags | O_NONBLOCK, 0666)) >= 0)
+        {
+            if (fstat(fd, &file_stat) == 0)
+            {
+                file_size = file_stat.st_size;
+                if (oflags & O_CREAT)
+                {
+                    fchown(fd, BT_UID, BT_GID);
+                    BTIF_TRACE_DEBUG0("\n ******CHANGED OWNERSHIP SUCCESSFULLY**********");
+                }
+            }
+        }
+
+        else
+        {
+            err = errno;
+        }
+    }
+
+    BTIF_TRACE_DEBUG4("[CO] bta_fs_co_open: handle:%d err:%d, flags:%x, app id:%d",
+            fd, err, oflags, app_id);
+    BTIF_TRACE_DEBUG1("file=%s", p_path);
+
+    /* convert fs error into bta_fs err. erro is set by first call to enough space to a valid value
+     * and needs only updating in case of error. This reports correct failure to remote obex! */
+
+    switch (err)
+    {
+
+    case 0:
+        status = BTA_FS_CO_OK;
+        break;
+    case EACCES:
+        status = BTA_FS_CO_EACCES;
+        break;
+    case EFBIG: /* file to big for available fs space */
+        status = BTA_FS_CO_ENOSPACE;
+        break;
+    default:
+        status = BTA_FS_CO_FAIL;
+        break;
+    }
+    bta_fs_ci_open(fd, status, file_size, evt);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_close
+**
+** Description      This function is called by BTA when a connection to a
+**                  client is closed.
+**
+** Parameters       fd      - file descriptor of file to close.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful],
+**                      [BTA_FS_CO_FAIL if failed  ]
+**
+*******************************************************************************/
+tBTA_FS_CO_STATUS bta_fs_co_close(int fd, UINT8 app_id)
+{
+    tBTA_FS_CO_STATUS status = BTA_FS_CO_OK;
+    int err;
+
+    BTIF_TRACE_DEBUG2("[CO] bta_fs_co_close: handle:%d, app id:%d",
+        fd, app_id);
+    if (close (fd) < 0)
+    {
+        err = errno;
+        status = BTA_FS_CO_FAIL;
+        BTIF_TRACE_WARNING3("[CO] bta_fs_co_close: handle:%d error=%d app_id:%d", fd, err, app_id);
+    }
+
+    return (status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_read
+**
+** Description      This function is called by BTA to read in data from the
+**                  previously opened file on the phone.
+**
+** Parameters       fd      - file descriptor of file to read from.
+**                  p_buf   - buffer to read the data into.
+**                  nbytes  - number of bytes to read into the buffer.
+**                  evt     - event that must be passed into the call-in function.
+**                  ssn     - session sequence number. Ignored, if bta_fs_co_open
+**							  was not called with BTA_FS_CO_RELIABLE.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, bta_fs_ci_read() is
+**                        called with the buffer of data, along with the number
+**                        of bytes read into the buffer, and a status.  The
+**                        call-in function should only be called when ALL requested
+**                        bytes have been read, the end of file has been detected,
+**                        or an error has occurred.
+**
+*******************************************************************************/
+void bta_fs_co_read(int fd, UINT8 *p_buf, UINT16 nbytes, UINT16 evt, UINT8 ssn, UINT8 app_id)
+{
+    tBTA_FS_CO_STATUS  status = BTA_FS_CO_OK;
+    INT32   num_read;
+    int     err;
+
+    if ((num_read = read (fd, p_buf, nbytes)) < 0)
+    {
+        err = errno;
+        status = BTA_FS_CO_FAIL;
+        BTIF_TRACE_WARNING3("[CO] bta_fs_co_read: handle:%d error=%d app_id:%d",
+                            fd, err, app_id);
+    }
+    else if (num_read < nbytes)
+        status = BTA_FS_CO_EOF;
+
+    bta_fs_ci_read(fd, (UINT16)num_read, status, evt);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_write
+**
+** Description      This function is called by io to send file data to the
+**                  phone.
+**
+** Parameters       fd      - file descriptor of file to write to.
+**                  p_buf   - buffer to read the data from.
+**                  nbytes  - number of bytes to write out to the file.
+**                  evt     - event that must be passed into the call-in function.
+**                  ssn     - session sequence number. Ignored, if bta_fs_co_open
+**							  was not called with BTA_FS_CO_RELIABLE.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, bta_fs_ci_write() is
+**                        called with the file descriptor and the status.  The
+**                        call-in function should only be called when ALL requested
+**                        bytes have been written, or an error has been detected,
+**
+*******************************************************************************/
+void bta_fs_co_write(int fd, const UINT8 *p_buf, UINT16 nbytes, UINT16 evt,
+                     UINT8 ssn, UINT8 app_id)
+{
+    tBTA_FS_CO_STATUS  status = BTA_FS_CO_OK;
+    INT32   num_written;
+    int     err=0;
+
+    if ((num_written = write (fd, p_buf, nbytes)) < 0)
+    {
+        err = errno;
+        status = BTA_FS_CO_FAIL;
+    }
+/*    BTIF_TRACE_DEBUG3("[CO] bta_fs_co_write: handle:%d error=%d, num_written:%d", fd, err, num_written);*/
+
+    bta_fs_ci_write(fd, status, evt);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_seek
+**
+** Description      This function is called by io to move the file pointer
+**                  of a previously opened file to the specified location for
+**                  the next read or write operation.
+**
+** Parameters       fd      - file descriptor of file.
+**                  offset  - Number of bytes from origin.
+**                  origin  - Initial position.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_seek (int fd, INT32 offset, INT16 origin, UINT8 app_id)
+{
+    lseek(fd, offset, origin);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_access
+**
+** Description      This function is called to check the existence of
+**                  a file or directory, and return whether or not it is a
+**                  directory or length of the file.
+**
+** Parameters       p_path   - (input) file or directory to access (fully qualified path).
+**                  mode     - (input) [BTA_FS_ACC_EXIST, BTA_FS_ACC_READ, or BTA_FS_ACC_RDWR]
+**                  p_is_dir - (output) returns TRUE if p_path specifies a directory.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                   [BTA_FS_CO_OK if it exists]
+**                   [BTA_FS_CO_EACCES if permissions are wrong]
+**                   [BTA_FS_CO_FAIL if it does not exist]
+**
+*******************************************************************************/
+tBTA_FS_CO_STATUS bta_fs_co_access(const char *p_path, int mode, BOOLEAN *p_is_dir,
+                                   UINT8 app_id)
+{
+    int err;
+    int os_mode = 0;
+    tBTA_FS_CO_STATUS status = BTA_FS_CO_OK;
+    struct stat buffer;
+
+    #if (TRUE==BTA_FS_DEBUG)
+    LOGI("***********CHECKING ACCESS TO = %s", p_path);
+    #endif
+
+    #if (defined BTA_PBS_INCLUDED) && (BTA_PBS_INCLUDED == TRUE)
+
+    if (app_id == UI_PBS_ID)
+    {
+
+        *p_is_dir = TRUE;
+
+        #if (TRUE==BTA_FS_DEBUG)
+        LOGI("***********SUPPORTED REPO = %d", bta_pbs_cfg.supported_repositories);
+        #endif
+        //Check if SIM contact requested,  and if so if it's supported.
+        //If not, return error!
+        if (strstr(p_path,"SIM1") && !(bta_pbs_cfg.supported_repositories & 0x2)) {
+            LOGI("***********RETURNING FAIL!");
+            return BTA_FS_CO_FAIL;
+        }
+
+        #if (TRUE==BTA_FS_DEBUG)
+        LOGI("***********RETURNING success!");
+        #endif
+        return (status);
+    }
+    #endif
+
+
+    *p_is_dir = FALSE;
+
+    if (mode == BTA_FS_ACC_RDWR)
+        os_mode = 6;
+    else if (mode == BTA_FS_ACC_READ)
+        os_mode = 4;
+
+    if (stat(p_path, &buffer) == 0)
+    {
+	/* Determine if the object is a file or directory */
+        if (S_ISDIR(buffer.st_mode))
+            *p_is_dir = TRUE;
+    }
+    else
+    {
+	BTIF_TRACE_DEBUG0("stat() failed! ");
+        return BTA_FS_CO_FAIL;
+    }
+
+    status=getAccess (os_mode, &buffer, (char*)p_path);
+    return (status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_mkdir
+**
+** Description      This function is called to create a directory with
+**                  the pathname given by path. The pathname is a null terminated
+**                  string. All components of the path must already exist.
+**
+** Parameters       p_path   - (input) name of directory to create (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                  [BTA_FS_CO_OK if successful]
+**                  [BTA_FS_CO_FAIL if unsuccessful]
+**
+*******************************************************************************/
+tBTA_FS_CO_STATUS bta_fs_co_mkdir(const char *p_path, UINT8 app_id)
+{
+    int err;
+    tBTA_FS_CO_STATUS status = BTA_FS_CO_OK;
+
+    if ((mkdir (p_path, 0666)) != 0)
+    {
+        err = errno;
+        status = BTA_FS_CO_FAIL;
+        BTIF_TRACE_WARNING3("[CO] bta_fs_co_mkdir: error=%d, path [%s] app_id:%d",
+                            err, p_path, app_id);
+    }
+    return (status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_rmdir
+**
+** Description      This function is called to remove a directory whose
+**                  name is given by path. The directory must be empty.
+**
+** Parameters       p_path   - (input) name of directory to remove (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if read-only]
+**                      [BTA_FS_CO_ENOTEMPTY if directory is not empty]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+tBTA_FS_CO_STATUS bta_fs_co_rmdir(const char *p_path, UINT8 app_id)
+{
+    int err, path_len;
+    tBTA_FS_CO_STATUS status = BTA_FS_CO_OK;
+    struct stat buffer;
+    char *dirName, *tmp = NULL;
+
+    path_len = strlen( p_path )+1;
+    BTIF_TRACE_DEBUG2( "bta_fs_co_rmdir( app_id: %d ): path_len: %d", app_id, path_len );
+#if (TRUE==BTA_FS_DEBUG)
+    BTIF_TRACE_DEBUG1( "bta_fs_co_rmdir():path_len: %d, p_path", app_id );
+    BTIF_TRACE_DEBUG0( p_path );
+#endif
+
+    /* allocate a temp buffer for path with 0 char. make sure not to crash if path is too big! */
+    dirName = (char*) calloc(1, path_len+1);
+    if ( NULL != dirName )
+    {
+        strcpy( dirName, p_path );
+    }
+    else
+    {
+        BTIF_TRACE_WARNING2( "bta_fs_co_rmdir( app_id: %d ) for path_len: %d::out of memory",
+                             app_id, path_len );
+        return BTA_FS_CO_FAIL;
+    }
+
+    if (NULL!= (tmp = strrchr(dirName, '/')))
+    {
+        *tmp = '\0';
+    }
+    if (stat(dirName, &buffer) == 0)
+    {
+        status = getAccess(6, &buffer, dirName);
+    }
+    else
+    {
+        free(dirName);
+#if (TRUE==BTA_FS_DEBUG)
+        BTIF_TRACE_WARNING0( "bta_fs_co_rmdir()::stat(dirName) failed" );
+#endif
+        return BTA_FS_CO_FAIL;
+    }
+
+    free(dirName);
+    if (status != BTA_FS_CO_OK)
+    {
+#if (TRUE==BTA_FS_DEBUG)
+        BTIF_TRACE_WARNING0( "bta_fs_co_rmdir()::getAccess(dirName) FAILED");
+#endif
+        return status;
+    }
+
+    if (stat(p_path, &buffer) == 0)
+    {
+        status = getAccess(6, &buffer, (char*)p_path);
+    }
+    else
+    {
+#if (TRUE==BTA_FS_DEBUG)
+        BTIF_TRACE_WARNING0( "bta_fs_co_rmdir()::stat(p_path) FAILED");
+#endif
+        return BTA_FS_CO_FAIL;
+    }
+
+    if (status != BTA_FS_CO_OK)
+    {
+#if (TRUE==BTA_FS_DEBUG)
+        BTIF_TRACE_DEBUG0( "bta_fs_co_rmdir()::getAccess(p_path) FAILED");
+#endif
+        return status;
+    }
+    //if ((rmdir (p_path)) != 0)
+    if (del_path(p_path) != 0)
+    {
+        err = errno;
+        BTIF_TRACE_WARNING1( "bta_fs_co_rmdir():rmdir/del_path FAILED with err: %d", err );
+        if (err == EACCES)
+            status = BTA_FS_CO_EACCES;
+        else if (err == ENOTEMPTY)
+            status = BTA_FS_CO_ENOTEMPTY;
+        else
+            status = BTA_FS_CO_FAIL;
+    }
+    return (status);
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_unlink
+**
+** Description      This function is called to remove a file whose name
+**                  is given by p_path.
+**
+** Parameters       p_path   - (input) name of file to remove (fully qualified path).
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if read-only]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+tBTA_FS_CO_STATUS bta_fs_co_unlink(const char *p_path, UINT8 app_id)
+{
+    BTIF_TRACE_DEBUG0("bta_fs_co_unlink");
+    int err;
+    tBTA_FS_CO_STATUS status = BTA_FS_CO_OK;
+    char *dirName, *tmp=NULL;
+    struct stat buffer;
+
+    if(! p_path)
+        return BTA_FS_CO_FAIL;
+
+    /* buffer needs to be NULL terminated - so add one more byte to be zero'd out */
+#if 0
+    dirName= (char*) calloc(1, strlen(p_path));  /* <--- this can cause problems  */
+#else
+    dirName= (char*) calloc(1, strlen(p_path) + 1);
+#endif
+
+    strncpy(dirName, p_path, strlen(p_path));
+    if((tmp=strrchr(dirName, '/')))
+    {
+	    *tmp='\0';
+    }
+    if (stat(dirName, &buffer) == 0)
+    {
+        status=getAccess (6, &buffer, dirName);
+        free(dirName);
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG0("stat() failed! ");
+        free(dirName);
+        return BTA_FS_CO_FAIL;
+    }
+
+    if(status!= BTA_FS_CO_OK)
+	return status;
+
+    if ((unlink (p_path)) != 0)
+    {
+        err = errno;
+        if (err == EACCES)
+            status = BTA_FS_CO_EACCES;
+        else
+            status = BTA_FS_CO_FAIL;
+    }
+    return (status);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_getdirentry
+**
+** Description      This function is called to get a directory entry for the
+**                  specified p_path.  The first/next directory should be filled
+**                  into the location specified by p_entry.
+**
+** Parameters       p_path      - directory to search (Fully qualified path)
+**                  first_item  - TRUE if first search, FALSE if next search
+**                                      (p_cur contains previous)
+**                  p_entry (input/output) - Points to last entry data (valid when
+**                                           first_item is FALSE)
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, the status is passed
+**                        in the bta_fs_ci_direntry() call-in function.
+**                        BTA_FS_CO_OK is returned when p_entry is valid,
+**                        BTA_FS_CO_EODIR is returned when no more entries [finished]
+**                        BTA_FS_CO_FAIL is returned if an error occurred
+**
+*******************************************************************************/
+void bta_fs_co_getdirentry(const char *p_path, BOOLEAN first_item,
+                           tBTA_FS_DIRENTRY *p_entry, UINT16 evt, UINT8 app_id)
+{
+    tBTA_FS_CO_STATUS    co_status = BTA_FS_CO_FAIL;
+    int                  status = -1;    /* '0' - success, '-1' - fail */
+    struct tm           *p_tm;
+    DIR *dir;
+    struct dirent *dirent;
+    struct stat buf;
+    char fullname[500];
+
+    BTIF_TRACE_DEBUG0("Entered bta_fs_co_getdirentry");
+
+    /* First item is to be retrieved */
+    if (first_item)
+    {
+        BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: path = %s", p_path);
+
+        dir = opendir(p_path);
+        if(dir == NULL)
+        {
+     	    BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dir is NULL so error out with errno=%d", errno);
+            co_status = BTA_FS_CO_EODIR;
+            bta_fs_ci_direntry(co_status, evt);
+            return;
+        }
+
+        BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dir = %p", dir);
+        if((dirent = readdir(dir)) != NULL)
+        {
+            p_entry->refdata = (UINT32) dir;     /* Save this for future searches */
+            status = 0;
+            BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dirent = %p", dirent);
+        }
+        else
+        {
+            BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dirent = %p", dirent);
+            /* Close the search if there are no more items */
+            closedir( (DIR*) p_entry->refdata);
+            co_status = BTA_FS_CO_EODIR;
+        }
+    }
+    else    /* Get the next entry based on the p_ref data from previous search */
+    {
+        if ((dirent = readdir((DIR*)p_entry->refdata))  == NULL)
+        {
+            /* Close the search if there are no more items */
+            closedir( (DIR*) p_entry->refdata);
+            co_status = BTA_FS_CO_EODIR;
+            BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dirent = %p", dirent);
+        }
+        else
+        {
+            BTIF_TRACE_DEBUG1("bta_fs_co_getdirentry: dirent = %p", dirent);
+            status = 0;
+        }
+    }
+
+    if (status == 0)
+    {
+        BTIF_TRACE_DEBUG0("bta_fs_co_getdirentry: status = 0");
+
+        sprintf(fullname, "%s/%s", p_path,  dirent->d_name);
+
+        /* Load new values into the return structure (refdata is left untouched) */
+        if (stat(fullname, &buf) == 0) {
+            p_entry->filesize = buf.st_size;
+            p_entry->mode = 0; /* Default is normal read/write file access */
+
+            if (S_ISDIR(buf.st_mode))
+                p_entry->mode |= BTA_FS_A_DIR;
+            else
+                p_entry->mode |= BTA_FS_A_RDONLY;
+
+            strcpy(p_entry->p_name, dirent->d_name);
+#if 0
+            fprintf(stderr, "bta_fs_co_getdirentry(): %s %9d %d\n",
+                            dirent->d_name,
+                            buf.st_size,
+                            p_entry->mode);
+#endif
+            p_tm = localtime((const time_t*)&buf.st_mtime);
+            if (p_tm != NULL)
+            {
+                sprintf(p_entry->crtime, "%04d%02d%02dT%02d%02d%02dZ",
+                        p_tm->tm_year + 1900,   /* Base Year ISO 6201 */
+                        p_tm->tm_mon + 1,       /* month starts at 0 */
+                        p_tm->tm_mday,
+                        p_tm->tm_hour,
+                        p_tm->tm_min,
+                        p_tm->tm_sec);
+            }
+            else
+                p_entry->crtime[0] = '\0';  /* No valid time */
+#if 0
+            fprintf(stderr, "bta_fs_co_getdirentry(): %s %9d %d %s\n",
+                            dirent->d_name,
+                            p_entry->filesize,
+                            p_entry->mode,
+                            p_entry->crtime);
+#endif
+            co_status = BTA_FS_CO_OK;
+        } else {
+            BTIF_TRACE_WARNING0("stat() failed! ");
+            co_status = BTA_FS_CO_EACCES;
+        }
+    }
+    BTIF_TRACE_DEBUG0("bta_fs_co_getdirentry: calling bta_fs_ci_getdirentry");
+
+    bta_fs_ci_direntry(co_status, evt);
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_setdir
+**
+** Description      This function is executed by BTA when the server changes the
+**                  local path
+**
+** Parameters       p_path  - the new path.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_setdir(const char *p_path, UINT8 app_id)
+{
+    BTIF_TRACE_DEBUG2("Entered %s. New path: %s", __FUNCTION__, p_path);
+}
+
+/*******************************************************************************
+** OBEX14 Reliable Session not supported. Stub associated callouts.
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_resume
+**
+** Description      This function is executed by BTA when resuming a session.
+**                  This is used to retrieve the session ID and related information
+**
+** Parameters       evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+**                  Note: Upon completion of the request, the related session information,
+**                        if successful, and an error code (tBTA_FS_CO_STATUS)
+**                        are returned in the call-in function, bta_fs_ci_resume().
+**
+*******************************************************************************/
+void bta_fs_co_resume(UINT16 evt, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_resume - NOT implemented");
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_set_perms
+**
+** Description      This function is called to set the permission a file/directory
+**                  with name as p_src_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to set permission (fully qualified path).
+**                  p_perms     - the permission .
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+void bta_fs_co_set_perms(const char *p_src_path,  UINT8 *p_perms, UINT16 evt, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_set_perms - NOT implemented");
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_rename
+**
+** Description      This function is called to move a file/directory whose
+**                  name is given by p_src_path to p_dest_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to be moved (fully qualified path).
+**                  p_dest_path - (input) new name of file/directory(fully qualified path).
+**                  p_perms     - the permission of the new object.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+void bta_fs_co_rename(const char *p_src_path, const char *p_dest_path, UINT8 *p_perms, UINT16 evt, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_rename - NOT implemented");
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_copy
+**
+** Description      This function is called to copy a file/directory whose
+**                  name is given by p_src_path to p_dest_path.
+**
+** Parameters       p_src_path  - (input) name of file/directory to be copied (fully qualified path).
+**                  p_dest_path - (input) new name of file/directory(fully qualified path).
+**                  p_perms     - the permission of the new object.
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id   - (input) application ID specified in the enable functions.
+**                                     It can be used to identify which profile is the caller
+**                                     of the call-out function.
+**
+** Returns          (tBTA_FS_CO_STATUS) status of the call.
+**                      [BTA_FS_CO_OK if successful]
+**                      [BTA_FS_CO_EIS_DIR if p_src_path is a folder]
+**                      [BTA_FS_CO_EACCES if p_dest_path already exists or could not be created (invalid path);
+**                                        or p_src_path is a directory and p_dest_path specifies a different path. ]
+**                      [BTA_FS_CO_FAIL otherwise]
+**
+*******************************************************************************/
+void bta_fs_co_copy(const char *p_src_path, const char *p_dest_path, UINT8 *p_perms, UINT16 evt, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_copy - NOT implemented");
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_resume_op
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  resumed and there was an interrupted operation.
+**
+** Parameters       offset  - the session ID and related information.
+**                  evt     - event that must be passed into the call-in function.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_resume_op(UINT32 offset, UINT16 evt, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_resume_op - NOT implemented");
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_session_info
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  established (p_sess_info != NULL) or ended (p_sess_info == NULL).
+**
+** Parameters       bd_addr     - the peer address
+**                  p_sess_info - the session ID and related information.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_session_info(BD_ADDR bd_addr, UINT8 *p_sess_info, UINT8 ssn,
+                                           tBTA_FS_CO_SESS_ST new_st, char *p_path, UINT8 *p_info, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_session_info - NOT implemented");
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_suspend
+**
+** Description      This function is executed by BTA when a reliable session is
+**                  suspended.
+**
+** Parameters       bd_addr - the peer address
+**                  ssn     - the session sequence number.
+**                  info    - the BTA specific information (like last active operation).
+**                  p_offset- the location to receive object offset of the suspended session
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_suspend(BD_ADDR bd_addr, UINT8 *p_sess_info, UINT8 ssn,
+                                      UINT32 *p_timeout, UINT32 *p_offset, UINT8 info, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_suspend - NOT implemented");
+}
+
+/*******************************************************************************
+**
+** Function         bta_fs_co_sess_ssn
+**
+** Description      This function is executed by BTA when resuming a session.
+**                  This is used to inform call-out module if the ssn/file offset
+**                  needs to be adjusted.
+**
+** Parameters       ssn     - the session sequence number of the first request
+**                            after resume.
+**                  app_id  - application ID specified in the enable functions.
+**                            It can be used to identify which profile is the caller
+**                            of the call-out function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_fs_co_sess_ssn(int fd, UINT8 ssn, UINT8 app_id)
+{
+    BTIF_TRACE_WARNING0("[CO] bta_fs_co_suspend - NOT implemented");
+}
+
diff --git a/btif/co/bta_hh_co.c b/btif/co/bta_hh_co.c
new file mode 100644
index 0000000..81414d2
--- /dev/null
+++ b/btif/co/bta_hh_co.c
@@ -0,0 +1,276 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+//#if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE))
+
+#include <ctype.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <linux/uhid.h>
+#include "btif_hh.h"
+#include "bta_api.h"
+#include "bta_hh_api.h"
+
+
+
+const char *dev_path = "/dev/uhid";
+
+
+/*Internal function to perform UHID write and error checking*/
+static int uhid_write(int fd, const struct uhid_event *ev)
+{
+    ssize_t ret;
+    ret = write(fd, ev, sizeof(*ev));
+    if (ret < 0){
+        int rtn = -errno;
+        APPL_TRACE_ERROR2("%s: Cannot write to uhid:%s",__FUNCTION__,strerror(errno));
+        return rtn;
+    } else if (ret != sizeof(*ev)) {
+        APPL_TRACE_ERROR3("%s: Wrong size written to uhid: %ld != %lu",
+                                                    __FUNCTION__, ret, sizeof(*ev));
+        return -EFAULT;
+    } else {
+        return 0;
+    }
+}
+
+void bta_hh_co_destroy(int fd)
+{
+    struct uhid_event ev;
+    memset(&ev, 0, sizeof(ev));
+    ev.type = UHID_DESTROY;
+    uhid_write(fd, &ev);
+    close(fd);
+}
+
+int bta_hh_co_write(int fd, UINT8* rpt, UINT16 len)
+{
+    APPL_TRACE_DEBUG0("bta_hh_co_data: UHID write");
+    struct uhid_event ev;
+    memset(&ev, 0, sizeof(ev));
+    ev.type = UHID_INPUT;
+    ev.u.input.size = len;
+    if(len > sizeof(ev.u.input.data)){
+        APPL_TRACE_WARNING1("%s:report size greater than allowed size",__FUNCTION__);
+        return -1;
+    }
+    memcpy(ev.u.input.data, rpt, len);
+    return uhid_write(fd, &ev);
+
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hh_co_open
+**
+** Description   When connection is opened, this call-out function is executed
+**               by HH to do platform specific initialization.
+**
+** Returns       void.
+*******************************************************************************/
+void bta_hh_co_open(UINT8 dev_handle, UINT8 sub_class, tBTA_HH_ATTR_MASK attr_mask,
+                    UINT8 app_id)
+{
+    UINT32 i;
+    btif_hh_device_t *p_dev = NULL;
+
+    if (dev_handle == BTA_HH_INVALID_HANDLE) {
+        APPL_TRACE_WARNING2("%s: Oops, dev_handle (%d) is invalid...", __FUNCTION__, dev_handle);
+        return;
+    }
+
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+        p_dev = &btif_hh_cb.devices[i];
+        if (p_dev->dev_status != BTHH_CONN_STATE_UNKNOWN && p_dev->dev_handle == dev_handle) {
+            // We found a device with the same handle. Must be a device reconnected.
+            APPL_TRACE_WARNING2("%s: Found an existing device with the same handle "
+                                                                "dev_status = %d",__FUNCTION__,
+                                                                p_dev->dev_status);
+            APPL_TRACE_WARNING6("%s:     bd_addr = [%02X:%02X:%02X:%02X:%02X:]", __FUNCTION__,
+                 p_dev->bd_addr.address[0], p_dev->bd_addr.address[1], p_dev->bd_addr.address[2],
+                 p_dev->bd_addr.address[3], p_dev->bd_addr.address[4]);
+                 APPL_TRACE_WARNING4("%s:     attr_mask = 0x%04x, sub_class = 0x%02x, app_id = %d",
+                                  __FUNCTION__, p_dev->attr_mask, p_dev->sub_class, p_dev->app_id);
+
+            if(p_dev->fd<0) {
+                p_dev->fd = open(dev_path, O_RDWR | O_CLOEXEC);
+                if (p_dev->fd < 0){
+                    APPL_TRACE_ERROR2("%s: Error: failed to open uhid, err:%s",
+                                                                    __FUNCTION__,strerror(errno));
+                }else
+                    APPL_TRACE_DEBUG2("%s: uhid fd = %d", __FUNCTION__, p_dev->fd);
+            }
+
+            break;
+        }
+        p_dev = NULL;
+    }
+
+    if (p_dev == NULL) {
+        // Did not find a device reconnection case. Find an empty slot now.
+        for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+            if (btif_hh_cb.devices[i].dev_status == BTHH_CONN_STATE_UNKNOWN) {
+                p_dev = &btif_hh_cb.devices[i];
+                p_dev->dev_handle = dev_handle;
+                p_dev->attr_mask  = attr_mask;
+                p_dev->sub_class  = sub_class;
+                p_dev->app_id     = app_id;
+
+                btif_hh_cb.device_num++;
+                // This is a new device,open the uhid driver now.
+                p_dev->fd = open(dev_path, O_RDWR | O_CLOEXEC);
+                if (p_dev->fd < 0){
+                    APPL_TRACE_ERROR2("%s: Error: failed to open uhid, err:%s",
+                                                                    __FUNCTION__,strerror(errno));
+                }else
+                    APPL_TRACE_DEBUG2("%s: uhid fd = %d", __FUNCTION__, p_dev->fd);
+
+
+                break;
+            }
+        }
+    }
+
+    if (p_dev == NULL) {
+        APPL_TRACE_ERROR1("%s: Error: too many HID devices are connected", __FUNCTION__);
+        return;
+    }
+
+    p_dev->dev_status = BTHH_CONN_STATE_CONNECTED;
+    APPL_TRACE_DEBUG2("%s: Return device status %d", __FUNCTION__, p_dev->dev_status);
+}
+
+
+/*******************************************************************************
+**
+** Function      bta_hh_co_close
+**
+** Description   When connection is closed, this call-out function is executed
+**               by HH to do platform specific finalization.
+**
+** Parameters    dev_handle  - device handle
+**                  app_id      - application id
+**
+** Returns          void.
+*******************************************************************************/
+void bta_hh_co_close(UINT8 dev_handle, UINT8 app_id)
+{
+    APPL_TRACE_WARNING3("%s: dev_handle = %d, app_id = %d", __FUNCTION__, dev_handle, app_id);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_co_data
+**
+** Description      This function is executed by BTA when HID host receive a data
+**                  report.
+**
+** Parameters       dev_handle  - device handle
+**                  *p_rpt      - pointer to the report data
+**                  len         - length of report data
+**                  mode        - Hid host Protocol Mode
+**                  sub_clas    - Device Subclass
+**                  app_id      - application id
+**
+** Returns          void
+*******************************************************************************/
+void bta_hh_co_data(UINT8 dev_handle, UINT8 *p_rpt, UINT16 len, tBTA_HH_PROTO_MODE mode,
+                    UINT8 sub_class, UINT8 ctry_code, BD_ADDR peer_addr, UINT8 app_id)
+{
+    btif_hh_device_t *p_dev;
+
+    APPL_TRACE_DEBUG6("%s: dev_handle = %d, subclass = 0x%02X, mode = %d, "
+         "ctry_code = %d, app_id = %d",
+         __FUNCTION__, dev_handle, sub_class, mode, ctry_code, app_id);
+
+    p_dev = btif_hh_find_connected_dev_by_handle(dev_handle);
+    if (p_dev == NULL) {
+        APPL_TRACE_WARNING2("%s: Error: unknown HID device handle %d", __FUNCTION__, dev_handle);
+        return;
+    }
+    // Send the HID report to the kernel.
+    if (p_dev->fd >= 0) {
+        bta_hh_co_write(p_dev->fd, p_rpt, len);
+    }else {
+        APPL_TRACE_WARNING3("%s: Error: fd = %d, len = %d", __FUNCTION__, p_dev->fd, len);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hh_co_send_hid_info
+**
+** Description      This function is called in btif_hh.c to process DSCP received.
+**
+** Parameters       dev_handle  - device handle
+**                  dscp_len    - report descriptor length
+**                  *p_dscp     - report descriptor
+**
+** Returns          void
+*******************************************************************************/
+void bta_hh_co_send_hid_info(btif_hh_device_t *p_dev, char *dev_name, UINT16 vendor_id,
+                             UINT16 product_id, UINT16 version, UINT8 ctry_code,
+                             int dscp_len, UINT8 *p_dscp)
+{
+    int result;
+    struct uhid_event ev;
+
+    if (p_dev->fd < 0) {
+        APPL_TRACE_WARNING3("%s: Error: fd = %d, dscp_len = %d", __FUNCTION__, p_dev->fd, dscp_len);
+        return;
+    }
+
+    APPL_TRACE_WARNING4("%s: fd = %d, name = [%s], dscp_len = %d", __FUNCTION__,
+                                                                    p_dev->fd, dev_name, dscp_len);
+    APPL_TRACE_WARNING5("%s: vendor_id = 0x%04x, product_id = 0x%04x, version= 0x%04x,"
+                                                                    "ctry_code=0x%02x",__FUNCTION__,
+                                                                    vendor_id, product_id,
+                                                                    version, ctry_code);
+
+//Create and send hid descriptor to kernel
+    memset(&ev, 0, sizeof(ev));
+    ev.type = UHID_CREATE;
+    strncpy((char*)ev.u.create.name, dev_name, sizeof(ev.u.create.name) - 1);
+    ev.u.create.rd_size = dscp_len;
+    ev.u.create.rd_data = p_dscp;
+    ev.u.create.bus = BUS_BLUETOOTH;
+    ev.u.create.vendor = vendor_id;
+    ev.u.create.product = product_id;
+    ev.u.create.version = version;
+    ev.u.create.country = ctry_code;
+    result = uhid_write(p_dev->fd, &ev);
+
+    APPL_TRACE_WARNING4("%s: fd = %d, dscp_len = %d, result = %d", __FUNCTION__,
+                                                                    p_dev->fd, dscp_len, result);
+
+    if (result) {
+        APPL_TRACE_WARNING2("%s: Error: failed to send DSCP, result = %d", __FUNCTION__, result);
+
+        /* The HID report descriptor is corrupted. Close the driver. */
+        close(p_dev->fd);
+        p_dev->fd = -1;
+    }
+}
+
+
diff --git a/btif/co/bta_hl_co.c b/btif/co/bta_hl_co.c
new file mode 100644
index 0000000..a7a9061
--- /dev/null
+++ b/btif/co/bta_hl_co.c
@@ -0,0 +1,459 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the HeaLth device profile (HL)
+ *  subsystem call-out functions.
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <time.h>
+#include <fcntl.h>
+#include <ctype.h>
+#include <cutils/sockets.h>
+#include <cutils/log.h>
+#include "bta_api.h"
+#include "btm_api.h"
+#include "bta_sys.h"
+#include "bta_hl_api.h"
+#include "bta_hl_co.h"
+#include "bta_hl_ci.h"
+#include "btif_hl.h"
+
+
+
+/*****************************************************************************
+**  Constants and Data Types
+*****************************************************************************/
+/**************************
+**  Common Definitions
+***************************/
+
+
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_num_of_mdep
+**
+** Description     This function is called to get the number of MDEPs for this
+**                 application ID
+**
+** Parameters      app_id - application ID
+**                 p_num_of_mdep (output) - number of MDEP configurations supported
+**                                          by the application
+**
+** Returns         Bloolean - TRUE success
+**
+*******************************************************************************/
+BOOLEAN bta_hl_co_get_num_of_mdep(UINT8 app_id, UINT8 *p_num_of_mdep)
+{
+    UINT8 app_idx;
+    BOOLEAN success = FALSE;
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        *p_num_of_mdep = p_btif_hl_cb->acb[app_idx].sup_feature.num_of_mdeps;
+        success = TRUE;
+    }
+
+
+    BTIF_TRACE_DEBUG3("%s success=%d num_mdeps=%d",
+                      __FUNCTION__, success, *p_num_of_mdep );
+    return success;
+}
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_advrtise_source_sdp
+**
+** Description     This function is called to find out whether the SOURCE MDEP
+**                 configuration information should be advertize in the SDP or nopt
+**
+** Parameters      app_id - application ID
+**
+** Returns         Bloolean - TRUE advertise the SOURCE MDEP configuration
+**                            information
+**
+*******************************************************************************/
+BOOLEAN bta_hl_co_advrtise_source_sdp(UINT8 app_id)
+{
+    BOOLEAN     advertize_source_sdp=FALSE;
+    UINT8       app_idx;
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        advertize_source_sdp = p_btif_hl_cb->acb[app_idx].sup_feature.advertize_source_sdp;
+    }
+
+
+    BTIF_TRACE_DEBUG2("%s advertize_flag=%d", __FUNCTION__, advertize_source_sdp );
+
+    return advertize_source_sdp;
+}
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_mdep_config
+**
+** Description     This function is called to get the supported feature
+**                 configuration for the specified mdep index and it also assigns
+**                 the MDEP ID for the specified mdep index
+**
+** Parameters      app_id - HDP application ID
+**                 mdep_idx - the mdep index
+**                 mdep_id  - the assigned MDEP ID for the specified medp_idx
+**                 p_mdl_cfg (output) - pointer to the MDEP configuration
+**
+**
+** Returns         Bloolean - TRUE success
+*******************************************************************************/
+BOOLEAN bta_hl_co_get_mdep_config(UINT8  app_id,
+                                  UINT8 mdep_idx,
+                                  tBTA_HL_MDEP_ID mdep_id,
+                                  tBTA_HL_MDEP_CFG *p_mdep_cfg)
+{
+    UINT8       idx  ;
+    UINT8       app_idx;
+    BOOLEAN     success = FALSE;
+
+    BTIF_TRACE_DEBUG4("%s app_id=%d mdep_idx=%d mdep_id=%d",
+                      __FUNCTION__, app_id,mdep_idx,mdep_id );
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        idx = mdep_idx -1;
+        p_btif_hl_cb->acb[app_idx].sup_feature.mdep[idx].mdep_id = mdep_id;
+        memcpy(p_mdep_cfg,
+               &p_btif_hl_cb->acb[app_idx].sup_feature.mdep[idx].mdep_cfg,
+               sizeof(tBTA_HL_MDEP_CFG));
+
+        success = TRUE;
+    }
+
+    BTIF_TRACE_DEBUG4("%s success=%d mdep_idx=%d mdep_id=%d",
+                      __FUNCTION__, success, mdep_idx, mdep_id );
+
+    return success;
+}
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_get_echo_config
+**
+** Description     This function is called to get the echo test
+**                 maximum APDU size configurations
+**
+** Parameters      app_id - HDP application ID
+**                 p_echo_cfg (output) - pointer to the Echo test maximum APDU size
+**                                       configuration
+**
+** Returns         Bloolean - TRUE success
+*******************************************************************************/
+BOOLEAN bta_hl_co_get_echo_config(UINT8  app_id,
+                                  tBTA_HL_ECHO_CFG *p_echo_cfg)
+{
+    UINT8               app_idx;
+    BOOLEAN             success = FALSE;
+    btif_hl_app_cb_t    *p_acb;
+    tBTA_HL_SUP_FEATURE *p_sup;
+
+    BTIF_TRACE_DEBUG2("%s app_id=%d",__FUNCTION__, app_id );
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_sup = &p_acb->sup_feature;
+        p_echo_cfg->max_rx_apdu_size = p_sup->echo_cfg.max_rx_apdu_size;
+        p_echo_cfg->max_tx_apdu_size = p_sup->echo_cfg.max_tx_apdu_size;
+        success = TRUE;
+    }
+
+    BTIF_TRACE_DEBUG4("%s success=%d max tx_size=%d rx_size=%d",
+                      __FUNCTION__, success, p_echo_cfg->max_tx_apdu_size,
+                      p_echo_cfg->max_rx_apdu_size );
+
+    return success;
+}
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_save_mdl
+**
+** Description     This function is called to save a MDL configuration item in persistent
+**                 storage
+**
+** Parameters      app_id - HDP application ID
+**                 item_idx - the MDL configuration storage index
+**                 p_mdl_cfg - pointer to the MDL configuration data
+**
+** Returns        void
+**
+*******************************************************************************/
+void bta_hl_co_save_mdl(UINT8 app_id, UINT8 item_idx, tBTA_HL_MDL_CFG *p_mdl_cfg )
+{
+
+    BTIF_TRACE_DEBUG6("%s app_id=%d, item_idx=%d active=%d mdl_id=%d time=%d",
+                      __FUNCTION__, app_id, item_idx,
+                      p_mdl_cfg->active,
+                      p_mdl_cfg->mdl_id,
+                      p_mdl_cfg->time);
+
+
+    btif_hl_save_mdl_cfg(app_id, item_idx, p_mdl_cfg);
+
+}
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_delete_mdl
+**
+** Description     This function is called to delete a MDL configuration item in persistent
+**                 storage
+**
+** Parameters      app_id - HDP application ID
+**                 item_idx - the MDL configuration storage index
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_hl_co_delete_mdl(UINT8 app_id, UINT8 item_idx)
+{
+
+
+    BTIF_TRACE_DEBUG3("%s app_id=%d, item_idx=%d", __FUNCTION__, app_id, item_idx);
+
+    btif_hl_delete_mdl_cfg(app_id, item_idx);
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_mdl_config
+**
+** Description     This function is called to get the MDL configuration
+**                 from the persistent memory. This function shall only be called
+*8                 once after the device is powered up
+**
+** Parameters      app_id - HDP application ID
+**                 buffer_size - the unit of the buffer size is sizeof(tBTA_HL_MDL_CFG)
+**                 p_mdl_buf - Point to the starting location of the buffer
+**
+** Returns         BOOLEAN
+**
+**
+*******************************************************************************/
+BOOLEAN bta_hl_co_load_mdl_config (UINT8 app_id, UINT8 buffer_size,
+                                   tBTA_HL_MDL_CFG *p_mdl_buf )
+{
+    BOOLEAN result = TRUE;
+    UINT8 i;
+    tBTA_HL_MDL_CFG *p;
+
+    BTIF_TRACE_DEBUG3("%s app_id=%d, num_items=%d",
+                      __FUNCTION__, app_id, buffer_size);
+
+    if (buffer_size > BTA_HL_NUM_MDL_CFGS)
+    {
+        result = FALSE;
+        return result;
+    }
+    result = btif_hl_load_mdl_config(app_id, buffer_size, p_mdl_buf);
+
+    if (result)
+    {
+        for (i=0, p=p_mdl_buf; i<buffer_size; i++, p++ )
+        {
+            if (p->active)
+            {
+                BTIF_TRACE_DEBUG6("i=%d mdl_id=0x%x dch_mode=%d local mdep_role=%d mdep_id=%d mtu=%d",
+                                  i, p->mdl_id, p->dch_mode, p->local_mdep_role, p->local_mdep_role, p->mtu);
+            }
+        }
+    }
+
+    BTIF_TRACE_DEBUG3("%s success=%d num_items=%d", __FUNCTION__, result, buffer_size);
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_tx_data
+**
+** Description     Get the data to be sent
+**
+** Parameters      app_id - HDP application ID
+**                 mdl_handle - MDL handle
+**                 buf_size - the size of the buffer
+**                 p_buf - the buffer pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_get_tx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+void bta_hl_co_get_tx_data (UINT8 app_id, tBTA_HL_MDL_HANDLE mdl_handle,
+                            UINT16 buf_size, UINT8 *p_buf,  UINT16 evt)
+{
+    UINT8 app_idx, mcl_idx, mdl_idx;
+    btif_hl_mdl_cb_t *p_dcb;
+    tBTA_HL_STATUS status = BTA_HL_STATUS_FAIL;
+
+    BTIF_TRACE_DEBUG4("%s app_id=%d mdl_handle=0x%x buf_size=%d",
+                      __FUNCTION__, app_id, mdl_handle, buf_size);
+
+    if (btif_hl_find_mdl_idx_using_handle(mdl_handle, &app_idx, &mcl_idx, &mdl_idx))
+    {
+        p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+        if (p_dcb->tx_size <= buf_size )
+        {
+            memcpy(p_buf, p_dcb->p_tx_pkt, p_dcb->tx_size);
+            btif_hl_free_buf((void **) &p_dcb->p_tx_pkt);
+            p_dcb->tx_size = 0;
+            status = BTA_HL_STATUS_OK;
+        }
+    }
+
+
+    bta_hl_ci_get_tx_data(mdl_handle,  status, evt);
+
+}
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_put_rx_data
+**
+** Description     Put the received data
+**
+** Parameters      app_id - HDP application ID
+**                 mdl_handle - MDL handle
+**                 data_size - the size of the data
+**                 p_data - the data pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_put_rx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+void bta_hl_co_put_rx_data (UINT8 app_id, tBTA_HL_MDL_HANDLE mdl_handle,
+                            UINT16 data_size, UINT8 *p_data, UINT16 evt)
+{
+    UINT8 app_idx, mcl_idx, mdl_idx;
+    btif_hl_mdl_cb_t *p_dcb;
+    tBTA_HL_STATUS status = BTA_HL_STATUS_FAIL;
+    int            r;
+    BTIF_TRACE_DEBUG4("%s app_id=%d mdl_handle=0x%x data_size=%d",
+                      __FUNCTION__,app_id, mdl_handle, data_size);
+
+    if (btif_hl_find_mdl_idx_using_handle(mdl_handle, &app_idx, &mcl_idx, &mdl_idx))
+    {
+        p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+        if ((p_dcb->p_rx_pkt = (UINT8 *)btif_hl_get_buf(data_size)) != NULL)
+        {
+            memcpy(p_dcb->p_rx_pkt, p_data, data_size);
+            if (p_dcb->p_scb)
+            {
+                BTIF_TRACE_DEBUG4("app_idx=%d mcl_idx=0x%x mdl_idx=0x%x data_size=%d",
+                                  app_idx, mcl_idx, mdl_idx, data_size);
+                r = send(p_dcb->p_scb->socket_id[1], p_dcb->p_rx_pkt, data_size, 0);
+
+                if (r == data_size)
+                {
+                    BTIF_TRACE_DEBUG1("socket send success data_size=%d",  data_size);
+                    status = BTA_HL_STATUS_OK;
+                }
+                else
+                {
+                    BTIF_TRACE_ERROR2("socket send failed r=%d data_size=%d",r, data_size);
+                }
+
+
+            }
+            btif_hl_free_buf((void **) &p_dcb->p_rx_pkt);
+        }
+    }
+
+    bta_hl_ci_put_rx_data(mdl_handle,  status, evt);
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_hl_co_get_tx_data
+**
+** Description     Get the Echo data to be sent
+**
+** Parameters      app_id - HDP application ID
+**                 mcl_handle - MCL handle
+**                 buf_size - the size of the buffer
+**                 p_buf - the buffer pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_get_tx_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+void bta_hl_co_get_echo_data (UINT8 app_id, tBTA_HL_MCL_HANDLE mcl_handle,
+                              UINT16 buf_size, UINT8 *p_buf,  UINT16 evt)
+{
+    tBTA_HL_STATUS status = BTA_HL_STATUS_FAIL;
+
+    BTIF_TRACE_ERROR1("%s not supported",__FUNCTION__);
+    bta_hl_ci_get_echo_data(mcl_handle,  status, evt);
+}
+
+
+/*******************************************************************************
+**
+** Function        bta_hl_co_put_echo_data
+**
+** Description     Put the received loopback echo data
+**
+** Parameters      app_id - HDP application ID
+**                 mcl_handle - MCL handle
+**                 data_size - the size of the data
+**                 p_data - the data pointer
+**                 evt - the evt to be passed back to the HL in the
+**                       bta_hl_ci_put_echo_data call-in function
+**
+** Returns        Void
+**
+*******************************************************************************/
+void bta_hl_co_put_echo_data (UINT8 app_id, tBTA_HL_MCL_HANDLE mcl_handle,
+                              UINT16 data_size, UINT8 *p_data, UINT16 evt)
+{
+    tBTA_HL_STATUS status = BTA_HL_STATUS_FAIL;
+
+    BTIF_TRACE_ERROR1("%s not supported",__FUNCTION__);
+    bta_hl_ci_put_echo_data(mcl_handle,  status, evt);
+}
+
diff --git a/btif/co/bta_pan_co.c b/btif/co/bta_pan_co.c
new file mode 100644
index 0000000..e78a5f8
--- /dev/null
+++ b/btif/co/bta_pan_co.c
@@ -0,0 +1,334 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      bta_pan_co.c
+ *
+ *  Description:   PAN stack callout api
+ *
+ *
+ ***********************************************************************************/
+#include "bta_api.h"
+#include "bta_pan_api.h"
+#include "bta_pan_ci.h"
+#include "bta_pan_co.h"
+#include "pan_api.h"
+#include "gki.h"
+//#include "btui.h"
+//#include "btui_int.h"
+#include <hardware/bluetooth.h>
+#include <hardware/bt_pan.h>
+#include "btif_pan_internal.h"
+#include "bd.h"
+
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define warn(fmt, ...) ALOGW ("## WARNING : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_init
+**
+** Description
+**
+**
+** Returns          Data flow mask.
+**
+*******************************************************************************/
+UINT8 bta_pan_co_init(UINT8 *q_level)
+{
+
+    ALOGD("bta_pan_co_init");
+
+    /* set the q_level to 30 buffers */
+    *q_level = 30;
+
+    //return (BTA_PAN_RX_PULL | BTA_PAN_TX_PULL);
+    return (BTA_PAN_RX_PUSH_BUF | BTA_PAN_RX_PUSH | BTA_PAN_TX_PULL);
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_open
+**
+** Description
+**
+**
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void bta_pan_co_open(UINT16 handle, UINT8 app_id, tBTA_PAN_ROLE local_role, tBTA_PAN_ROLE peer_role, BD_ADDR peer_addr)
+{
+    ALOGD("bta_pan_co_open:app_id:%d, local_role:%d, peer_role:%d, handle:%d",
+            app_id, local_role, peer_role, handle);
+    btpan_conn_t* conn = btpan_find_conn_addr(peer_addr);
+    if(conn == NULL)
+        conn = btpan_new_conn(handle, peer_addr, local_role, peer_role);
+    if(conn)
+    {
+        ALOGD("bta_pan_co_open:tap_fd:%d, open_count:%d, conn->handle:%d should = handle:%d, local_role:%d, remote_role:%d",
+             btpan_cb.tap_fd, btpan_cb.open_count, conn->handle, handle, conn->local_role, conn->remote_role);
+        //refresh the role & bt address
+
+        btpan_cb.open_count++;
+        conn->handle = handle;
+        //bdcpy(conn->peer, peer_addr);
+        if(btpan_cb.tap_fd < 0)
+        {
+            btpan_cb.tap_fd = btpan_tap_open();
+            if(btpan_cb.tap_fd >= 0)
+                create_tap_read_thread(btpan_cb.tap_fd);
+        }
+        if(btpan_cb.tap_fd >= 0)
+        {
+            conn->state = PAN_STATE_OPEN;
+            bta_pan_ci_rx_ready(handle);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_close
+**
+** Description      This function is called by PAN when a connection to a
+**                  peer is closed.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_close(UINT16 handle, UINT8 app_id)
+{
+    ALOGD("bta_pan_co_close:app_id:%d, handle:%d", app_id, handle);
+    btpan_conn_t* conn = btpan_find_conn_handle(handle);
+    if(conn && conn->state == PAN_STATE_OPEN)
+    {
+        ALOGD("bta_pan_co_close");
+
+        // let bta close event reset this handle as it needs
+        // the handle to find the connection upon CLOSE
+        //conn->handle = -1;
+        conn->state = PAN_STATE_CLOSE;
+        btpan_cb.open_count--;
+
+        if(btpan_cb.open_count == 0)
+        {
+            destroy_tap_read_thread();
+            if(btpan_cb.tap_fd != -1)
+            {
+                btpan_tap_close(btpan_cb.tap_fd);
+                btpan_cb.tap_fd = -1;
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_path
+**
+** Description      This function is called by PAN to transfer data on the
+**                  TX path; that is, data being sent from BTA to the phone.
+**                  This function is used when the TX data path is configured
+**                  to use the pull interface.  The implementation of this
+**                  function will typically call Bluetooth stack functions
+**                  PORT_Read() or PORT_ReadData() to read data from RFCOMM
+**                  and then a platform-specific function to send data that
+**                  data to the phone.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_tx_path(UINT16 handle, UINT8 app_id)
+{
+    BT_HDR          *p_buf;
+    UINT8           i;
+    BD_ADDR            src;
+    BD_ADDR            dst;
+    UINT16            protocol;
+    BOOLEAN            ext;
+    BOOLEAN         forward;
+
+    ALOGD("bta_pan_co_tx_path, handle:%d, app_id:%d", handle, app_id);
+
+    btpan_conn_t* conn = btpan_find_conn_handle(handle);
+    if(conn && conn->state != PAN_STATE_OPEN)
+    {
+        ALOGE("bta_pan_co_tx_path: cannot find pan connction or conn is not opened, conn:%p, conn->state:%d", conn, conn->state);
+        return;
+    }
+    do
+    {
+
+        /* read next data buffer from pan */
+        if ((p_buf = bta_pan_ci_readbuf(handle, src, dst, &protocol,
+                                 &ext, &forward)))
+        {
+            ALOGD("bta_pan_co_tx_path, calling btapp_tap_send, p_buf->len:%d, offset:%d", p_buf->len, p_buf->offset);
+            if(is_empty_eth_addr(conn->eth_addr) && is_valid_bt_eth_addr(src))
+            {
+                ALOGD("pan bt peer addr: %02x:%02x:%02x:%02x:%02x:%02x, update its ethernet addr: %02x:%02x:%02x:%02x:%02x:%02x",
+                        conn->peer[0], conn->peer[1], conn->peer[2], conn->peer[3],conn->peer[4], conn->peer[5],
+                        src[0], src[1], src[2], src[3],src[4], src[5]);
+                memcpy(conn->eth_addr, src, sizeof(conn->eth_addr));
+
+            }
+            btpan_tap_send(btpan_cb.tap_fd, src, dst, protocol, (char*)(p_buf + 1) + p_buf->offset, p_buf->len, ext, forward);
+            GKI_freebuf(p_buf);
+        }
+
+    } while (p_buf != NULL);
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_rx_path
+**
+** Description
+**
+**
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_rx_path(UINT16 handle, UINT8 app_id)
+{
+
+
+    UINT8           i;
+
+    ALOGD("bta_pan_co_rx_path not used");
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_write
+**
+** Description      This function is called by PAN to send data to the phone
+**                  when the TX path is configured to use a push interface.
+**                  The implementation of this function must copy the data to
+**                  the phone's memory.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_tx_write(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, UINT8 *p_data,
+                                UINT16 len, BOOLEAN ext, BOOLEAN forward)
+{
+     ALOGD("bta_pan_co_tx_write not used");
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_tx_writebuf
+**
+** Description      This function is called by PAN to send data to the phone
+**                  when the TX path is configured to use a push interface with
+**                  zero copy.  The phone must free the buffer using function
+**                  GKI_freebuf() when it is through processing the buffer.
+**
+**
+** Returns          TRUE if flow enabled
+**
+*******************************************************************************/
+void  bta_pan_co_tx_writebuf(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, BT_HDR *p_buf,
+                                   BOOLEAN ext, BOOLEAN forward)
+{
+
+    ALOGD("bta_pan_co_tx_writebuf not used");
+
+
+}
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_rx_flow
+**
+** Description      This function is called by PAN to enable or disable
+**                  data flow on the RX path when it is configured to use
+**                  a push interface.  If data flow is disabled the phone must
+**                  not call bta_pan_ci_rx_write() or bta_pan_ci_rx_writebuf()
+**                  until data flow is enabled again.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_rx_flow(UINT16 handle, UINT8 app_id, BOOLEAN enable)
+{
+
+    ALOGD("bta_pan_co_rx_flow, enabled:%d, not used", enable);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_pan_co_filt_ind
+**
+** Description      protocol filter indication from peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_pfilt_ind(UINT16 handle, BOOLEAN indication, tBTA_PAN_STATUS result,
+                                    UINT16 len, UINT8 *p_filters)
+{
+    ALOGD("bta_pan_co_pfilt_ind");
+
+}
+/*******************************************************************************
+**
+** Function         bta_pan_co_mfilt_ind
+**
+** Description      multicast filter indication from peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_pan_co_mfilt_ind(UINT16 handle, BOOLEAN indication, tBTA_PAN_STATUS result,
+                                    UINT16 len, UINT8 *p_filters)
+{
+
+    ALOGD("bta_pan_co_mfilt_ind");
+}
+
diff --git a/btif/co/bta_sys_co.c b/btif/co/bta_sys_co.c
new file mode 100644
index 0000000..b7768ad
--- /dev/null
+++ b/btif/co/bta_sys_co.c
@@ -0,0 +1,57 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include "bta_sys.h"
+#include "bta_sys_ci.h"
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_co_enable
+**
+** Description      This function is called by the stack to power up the HW
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_hw_co_enable( tBTA_SYS_HW_MODULE module )
+{
+    /* platform specific implementation to power-up the HW */
+
+
+    /* if no client/server asynchronous system like linux-based OS, directly call the ci here */
+    bta_sys_hw_ci_enabled( module );
+}
+
+
+/*******************************************************************************
+**
+** Function         bta_sys_hw_co_disable
+**
+** Description     This function is called by the stack to power down the HW
+**
+** Returns          void
+**
+*******************************************************************************/
+void bta_sys_hw_co_disable( tBTA_SYS_HW_MODULE module )
+{
+    /* platform specific implementation to power-down the HW */
+
+
+    /* if no client/server asynchronous system like linux-based OS, directly call the ci here */
+    bta_sys_hw_ci_disabled( module );
+
+}
diff --git a/btif/include/btif_api.h b/btif/include/btif_api.h
new file mode 100644
index 0000000..c787bec
--- /dev/null
+++ b/btif/include/btif_api.h
@@ -0,0 +1,328 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_api.h
+ *
+ *  Description:   Main API header file for all BTIF functions accessed
+ *                 from main bluetooth HAL. All HAL extensions will not
+ *                 require headerfiles as they would be accessed through
+ *                 callout/callins.
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_API_H
+#define BTIF_API_H
+
+#include "btif_common.h"
+#include "btif_dm.h"
+
+/*******************************************************************************
+**  BTIF CORE API
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_init_bluetooth
+**
+** Description      Creates BTIF task and prepares BT scheduler for startup
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_init_bluetooth(void);
+
+/*******************************************************************************
+**
+** Function         btif_enable_bluetooth
+**
+** Description      Performs chip power on and kickstarts OS scheduler
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_enable_bluetooth(void);
+
+/*******************************************************************************
+**
+** Function         btif_disable_bluetooth
+**
+** Description      Inititates shutdown of Bluetooth system.
+**                  Any active links will be dropped and device entering
+**                  non connectable/discoverable mode
+**
+** Returns          void
+**
+*******************************************************************************/
+bt_status_t btif_disable_bluetooth(void);
+
+/*******************************************************************************
+**
+** Function         btif_shutdown_bluetooth
+**
+** Description      Finalizes BT scheduler shutdown and terminates BTIF
+**                  task.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+bt_status_t btif_shutdown_bluetooth(void);
+
+/*******************************************************************************
+**
+** Function         btif_get_adapter_properties
+**
+** Description      Fetches all local adapter properties
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_adapter_properties(void);
+
+/*******************************************************************************
+**
+** Function         btif_get_adapter_property
+**
+** Description      Fetches property value from local cache
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_adapter_property( bt_property_type_t type);
+
+/*******************************************************************************
+**
+** Function         btif_set_adapter_property
+**
+** Description      Updates core stack with property value and stores it in
+**                  local cache
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_set_adapter_property( const bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_device_property
+**
+** Description      Fetches the remote device property from the NVRAM
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_device_property( bt_bdaddr_t *remote_addr,
+                                             bt_property_type_t type);
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_device_properties
+**
+** Description      Fetches all the remote device properties from NVRAM
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_device_properties( bt_bdaddr_t *remote_addr);
+
+/*******************************************************************************
+**
+** Function         btif_set_remote_device_property
+**
+** Description      Writes the remote device property to NVRAM.
+**                  Currently, BT_PROPERTY_REMOTE_FRIENDLY_NAME is the only
+**                  remote device property that can be set
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_set_remote_device_property( bt_bdaddr_t *remote_addr,
+                                             const bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_service_record
+**
+** Description      Looks up the service matching uuid on the remote device
+**                  and fetches the SCN and service_name if the UUID is found
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_service_record( bt_bdaddr_t *remote_addr,
+                                            bt_uuid_t *uuid);
+
+
+/*******************************************************************************
+**  BTIF DM API
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_dm_start_discovery
+**
+** Description      Start device discovery/inquiry
+**
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_start_discovery(void);
+
+/*******************************************************************************
+**
+** Function         btif_dm_cancel_discovery
+**
+** Description      Cancels search
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_cancel_discovery(void);
+
+/*******************************************************************************
+**
+** Function         btif_dm_create_bond
+**
+** Description      Initiate bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_create_bond(const bt_bdaddr_t *bd_addr);
+
+/*******************************************************************************
+**
+** Function         btif_dm_cancel_bond
+**
+** Description      Initiate bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_cancel_bond(const bt_bdaddr_t *bd_addr);
+
+/*******************************************************************************
+**
+** Function         btif_dm_remove_bond
+**
+** Description      Removes bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_remove_bond(const bt_bdaddr_t *bd_addr);
+
+/*******************************************************************************
+**
+** Function         btif_dm_pin_reply
+**
+** Description      BT legacy pairing - PIN code reply
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_pin_reply( const bt_bdaddr_t *bd_addr, uint8_t accept,
+                               uint8_t pin_len, bt_pin_code_t *pin_code);
+
+/*******************************************************************************
+**
+** Function         btif_dm_passkey_reply
+**
+** Description      BT SSP passkey reply
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_passkey_reply( const bt_bdaddr_t *bd_addr,
+                                   uint8_t accept, uint32_t passkey);
+
+/*******************************************************************************
+**
+** Function         btif_dm_ssp_reply
+**
+** Description      BT SSP Reply - Just Works, Numeric Comparison & Passkey Entry
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_ssp_reply( const bt_bdaddr_t *bd_addr,
+                              bt_ssp_variant_t variant, uint8_t accept,
+                              uint32_t passkey);
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_adapter_property
+**
+** Description      Queries the BTA for the adapter property
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_get_adapter_property(bt_property_t *prop);
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_remote_services
+**
+** Description      Start SDP to get remote services
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_get_remote_service_record(bt_bdaddr_t *remote_addr,
+                                              bt_uuid_t *uuid);
+
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_remote_services
+**
+** Description      Start SDP to get remote services
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_get_remote_services(bt_bdaddr_t *remote_addr);
+
+/*******************************************************************************
+**
+** Function         btif_dut_mode_configure
+**
+** Description      Configure Test Mode - 'enable' to 1 puts the device in test mode and 0 exits
+**                       test mode
+**
+** Returns          BT_STATUS_SUCCESS on success
+**
+*******************************************************************************/
+bt_status_t btif_dut_mode_configure(uint8_t enable);
+
+/*******************************************************************************
+**
+** Function         btif_dut_mode_send
+**
+** Description     Sends a HCI Vendor specific command to the controller
+**
+** Returns          BT_STATUS_SUCCESS on success
+**
+*******************************************************************************/
+bt_status_t btif_dut_mode_send(uint16_t opcode, uint8_t *buf, uint8_t len);
+
+#endif /* BTIF_API_H */
diff --git a/btif/include/btif_av.h b/btif/include/btif_av.h
new file mode 100644
index 0000000..c6bd20a
--- /dev/null
+++ b/btif/include/btif_av.h
@@ -0,0 +1,116 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_av.h
+ *
+ *  Description:   Main API header file for all BTIF AV functions accessed
+ *                 from internal stack.
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_AV_H
+#define BTIF_AV_H
+
+#include "btif_common.h"
+#include "btif_sm.h"
+#include "bta_av_api.h"
+
+
+/*******************************************************************************
+**  Type definitions for callback functions
+********************************************************************************/
+
+typedef enum {
+    /* Reuse BTA_AV_XXX_EVT - No need to redefine them here */
+    BTIF_AV_CONNECT_REQ_EVT = BTA_AV_MAX_EVT,
+    BTIF_AV_DISCONNECT_REQ_EVT,
+    BTIF_AV_START_STREAM_REQ_EVT,
+    BTIF_AV_STOP_STREAM_REQ_EVT,
+    BTIF_AV_SUSPEND_STREAM_REQ_EVT,
+    BTIF_AV_RECONFIGURE_REQ_EVT,
+} btif_av_sm_event_t;
+
+
+/*******************************************************************************
+**  BTIF AV API
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_av_get_sm_handle
+**
+** Description      Fetches current av SM handle
+**
+** Returns          None
+**
+*******************************************************************************/
+
+btif_sm_handle_t btif_av_get_sm_handle(void);
+
+/*******************************************************************************
+**
+** Function         btif_av_stream_ready
+**
+** Description      Checks whether AV is ready for starting a stream
+**
+** Returns          None
+**
+*******************************************************************************/
+
+BOOLEAN btif_av_stream_ready(void);
+
+/*******************************************************************************
+**
+** Function         btif_av_stream_started_ready
+**
+** Description      Checks whether AV ready for media start in streaming state
+**
+** Returns          None
+**
+*******************************************************************************/
+
+BOOLEAN btif_av_stream_started_ready(void);
+
+/*******************************************************************************
+**
+** Function         btif_dispatch_sm_event
+**
+** Description      Send event to AV statemachine
+**
+** Returns          None
+**
+*******************************************************************************/
+
+/* used to pass events to AV statemachine from other tasks */
+void btif_dispatch_sm_event(btif_av_sm_event_t event, void *p_data, int len);
+
+/*******************************************************************************
+**
+** Function         btif_av_init
+**
+** Description      Initializes btif AV if not already done
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_av_init(void);
+
+#endif /* BTIF_AV_H */
diff --git a/btif/include/btif_av_api.h b/btif/include/btif_av_api.h
new file mode 100644
index 0000000..86cd40b
--- /dev/null
+++ b/btif/include/btif_av_api.h
@@ -0,0 +1,210 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ **
+ **  Name:           btif_av_api.h
+ **
+ **  Description:    This is the public interface file for the advanced
+ **                  audio/video streaming (AV) subsystem of BTIF, Broadcom's
+ **                  Bluetooth application layer for mobile phones.
+ **
+ *****************************************************************************/
+
+#ifndef BTIF_AV_API_H
+#define BTIF_AV_API_H
+
+#include "bt_target.h"
+#include "bta_av_api.h"
+#include "uipc.h"
+
+#include "btif_media.h"
+#include "a2d_api.h"
+#include "a2d_sbc.h"
+
+
+/*****************************************************************************
+ **  Constants and data types
+ *****************************************************************************/
+
+/* Codec type */
+#define BTIF_AV_CODEC_NONE       0xFF
+#define BTIF_AV_CODEC_SBC        A2D_MEDIA_CT_SBC        /* SBC media codec type */
+
+#define BTIF_AV_CODEC_PCM        0x5                     /* Raw PCM */
+
+typedef UINT8 tBTIF_AV_CODEC_ID;
+
+/* AV features masks */
+#define BTIF_AV_FEAT_RCTG        BTA_AV_FEAT_RCTG      /* remote control target */
+#define BTIF_AV_FEAT_RCCT        BTA_AV_FEAT_RCCT      /* remote control controller */
+#define BTIF_AV_FEAT_METADATA    BTA_AV_FEAT_METADATA  /* remote control Metadata Transfer command/response */
+
+typedef UINT16 tBTIF_AV_FEAT;
+
+/* AV channel values */
+#define BTIF_AV_CHNL_MSK         BTA_AV_CHNL_MSK
+#define BTIF_AV_CHNL_AUDIO       BTA_AV_CHNL_AUDIO       /* audio channel */
+#define BTIF_AV_CHNL_VIDEO       BTA_AV_CHNL_VIDEO       /* video channel */
+typedef UINT8 tBTIF_AV_CHNL;
+
+typedef UINT8 tBTIF_AV_HNDL;
+
+/* Operation id list for BTIF_AvRemoteCmd */
+#define BTIF_AV_ID_SELECT      0x00    /* select */
+#define BTIF_AV_ID_UP          0x01    /* up */
+#define BTIF_AV_ID_DOWN        0x02    /* down */
+#define BTIF_AV_ID_LEFT        0x03    /* left */
+#define BTIF_AV_ID_RIGHT       0x04    /* right */
+#define BTIF_AV_ID_RIGHT_UP    0x05    /* right-up */
+#define BTIF_AV_ID_RIGHT_DOWN  0x06    /* right-down */
+#define BTIF_AV_ID_LEFT_UP     0x07    /* left-up */
+#define BTIF_AV_ID_LEFT_DOWN   0x08    /* left-down */
+#define BTIF_AV_ID_ROOT_MENU   0x09    /* root menu */
+#define BTIF_AV_ID_SETUP_MENU  0x0A    /* setup menu */
+#define BTIF_AV_ID_CONT_MENU   0x0B    /* contents menu */
+#define BTIF_AV_ID_FAV_MENU    0x0C    /* favorite menu */
+#define BTIF_AV_ID_EXIT        0x0D    /* exit */
+#define BTIF_AV_ID_0           0x20    /* 0 */
+#define BTIF_AV_ID_1           0x21    /* 1 */
+#define BTIF_AV_ID_2           0x22    /* 2 */
+#define BTIF_AV_ID_3           0x23    /* 3 */
+#define BTIF_AV_ID_4           0x24    /* 4 */
+#define BTIF_AV_ID_5           0x25    /* 5 */
+#define BTIF_AV_ID_6           0x26    /* 6 */
+#define BTIF_AV_ID_7           0x27    /* 7 */
+#define BTIF_AV_ID_8           0x28    /* 8 */
+#define BTIF_AV_ID_9           0x29    /* 9 */
+#define BTIF_AV_ID_DOT         0x2A    /* dot */
+#define BTIF_AV_ID_ENTER       0x2B    /* enter */
+#define BTIF_AV_ID_CLEAR       0x2C    /* clear */
+#define BTIF_AV_ID_CHAN_UP     0x30    /* channel up */
+#define BTIF_AV_ID_CHAN_DOWN   0x31    /* channel down */
+#define BTIF_AV_ID_PREV_CHAN   0x32    /* previous channel */
+#define BTIF_AV_ID_SOUND_SEL   0x33    /* sound select */
+#define BTIF_AV_ID_INPUT_SEL   0x34    /* input select */
+#define BTIF_AV_ID_DISP_INFO   0x35    /* display information */
+#define BTIF_AV_ID_HELP        0x36    /* help */
+#define BTIF_AV_ID_PAGE_UP     0x37    /* page up */
+#define BTIF_AV_ID_PAGE_DOWN   0x38    /* page down */
+#define BTIF_AV_ID_POWER       0x40    /* power */
+#define BTIF_AV_ID_VOL_UP      0x41    /* volume up */
+#define BTIF_AV_ID_VOL_DOWN    0x42    /* volume down */
+#define BTIF_AV_ID_MUTE        0x43    /* mute */
+#define BTIF_AV_ID_PLAY        0x44    /* play */
+#define BTIF_AV_ID_STOP        0x45    /* stop */
+#define BTIF_AV_ID_PAUSE       0x46    /* pause */
+#define BTIF_AV_ID_RECORD      0x47    /* record */
+#define BTIF_AV_ID_REWIND      0x48    /* rewind */
+#define BTIF_AV_ID_FAST_FOR    0x49    /* fast forward */
+#define BTIF_AV_ID_EJECT       0x4A    /* eject */
+#define BTIF_AV_ID_FORWARD     0x4B    /* forward */
+#define BTIF_AV_ID_BACKWARD    0x4C    /* backward */
+#define BTIF_AV_ID_ANGLE       0x50    /* angle */
+#define BTIF_AV_ID_SUBPICT     0x51    /* subpicture */
+#define BTIF_AV_ID_F1          0x71    /* F1 */
+#define BTIF_AV_ID_F2          0x72    /* F2 */
+#define BTIF_AV_ID_F3          0x73    /* F3 */
+#define BTIF_AV_ID_F4          0x74    /* F4 */
+#define BTIF_AV_ID_F5          0x75    /* F5 */
+#define BTIF_AV_ID_VENDOR      0x7E    /* vendor unique */
+#define BTIF_AV_KEYPRESSED_RELEASE 0x80
+
+typedef UINT8 tBTIF_AV_RC;
+
+/* State flag for pass through command */
+#define BTIF_AV_STATE_PRESS      0    /* key pressed */
+#define BTIF_AV_STATE_RELEASE    1  /* key released */
+
+typedef UINT8 tBTIF_AV_STATE;
+
+typedef UINT8 tBTIF_AV_RC_HNDL;
+
+/* Command codes for BTIF_AvVendorCmd */
+#define BTIF_AV_CMD_CTRL         0
+#define BTIF_AV_CMD_STATUS       1
+#define BTIF_AV_CMD_SPEC_INQ     2
+#define BTIF_AV_CMD_NOTIF        3
+#define BTIF_AV_CMD_GEN_INQ      4
+
+typedef UINT8 tBTIF_AV_CMD;
+
+/* AV callback events */
+#define BTIF_AV_OPEN_EVT         0       /* connection opened */
+#define BTIF_AV_CLOSE_EVT        1       /* connection closed */
+#define BTIF_AV_START_EVT        2       /* stream data transfer started */
+#define BTIF_AV_STOP_EVT         3       /* stream data transfer stopped */
+#define BTIF_AV_RC_OPEN_EVT      4       /* remote control channel open */
+#define BTIF_AV_RC_CLOSE_EVT     5       /* remote control channel closed */
+#define BTIF_AV_REMOTE_CMD_EVT   6      /* remote control command */
+#define BTIF_AV_REMOTE_RSP_EVT   7      /* remote control response */
+#define BTIF_AV_META_MSG_EVT     8      /* metadata messages */
+
+typedef UINT8 tBTIF_AV_EVT;
+
+#define BTIF_AV_FEEDING_ASYNCHRONOUS 0   /* asynchronous feeding, use tx av timer */
+#define BTIF_AV_FEEDING_SYNCHRONOUS  1   /* synchronous feeding, no av tx timer */
+
+#define BTIF_AV_MAX_SYNCHRONOUS_LATENCY 80 /* max latency in ms for BTIF_AV_FEEDING_SYNCHRONOUS */
+#define BTIF_AV_MIN_SYNCHRONOUS_LATENCY 4 /* min latency in ms for BTIF_AV_FEEDING_SYNCHRONOUS */
+
+typedef UINT8 tBTIF_AV_FEEDING_MODE;
+
+#define BTIF_AV_CHANNEL_MODE_MONO    A2D_SBC_IE_CH_MD_MONO
+#define BTIF_AV_CHANNEL_MODE_STEREO  A2D_SBC_IE_CH_MD_STEREO
+#define BTIF_AV_CHANNEL_MODE_JOINT   A2D_SBC_IE_CH_MD_JOINT
+#define BTIF_AV_CHANNEL_MODE_DUAL    A2D_SBC_IE_CH_MD_DUAL
+
+typedef UINT8 tBTIF_AV_CHANNEL_MODE;
+
+/**
+ * Structure used to configure the AV codec capabilities/config
+ */
+typedef struct
+{
+    tBTIF_AV_CODEC_ID id;            /* Codec ID (in terms of BTIF) */
+    UINT8 info[AVDT_CODEC_SIZE];     /* Codec info (can be config or capabilities) */
+} tBTIF_AV_CODEC_INFO;
+
+/**
+ * Structure used to configure the AV media feeding
+ */
+typedef struct
+{
+    UINT16 sampling_freq;   /* 44100, 48000 etc */
+    UINT16 num_channel;     /* 1 for mono or 2 stereo */
+    UINT8  bit_per_sample;  /* Number of bits per sample (8, 16) */
+} tBTIF_AV_MEDIA_FEED_CFG_PCM;
+
+typedef union
+{
+    tBTIF_AV_MEDIA_FEED_CFG_PCM pcm;     /* Raw PCM feeding format */
+}tBTIF_AV_MEDIA_FEED_CFG;
+
+typedef struct
+{
+    tBTIF_AV_CODEC_ID format;        /* Media codec identifier */
+    tBTIF_AV_MEDIA_FEED_CFG cfg;     /* Media codec configuration */
+} tBTIF_AV_MEDIA_FEEDINGS;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTIF_AV_API_H */
diff --git a/btif/include/btif_av_co.h b/btif/include/btif_av_co.h
new file mode 100644
index 0000000..20e9a1e
--- /dev/null
+++ b/btif/include/btif_av_co.h
@@ -0,0 +1,173 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_AV_CO_H
+#define BTIF_AV_CO_H
+
+#include "btif_media.h"
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+enum
+{
+    BTIF_SV_AV_AA_SBC_INDEX = 0,
+    BTIF_SV_AV_AA_SEP_INDEX  /* Last index */
+};
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_is_active
+ **
+ ** Description      Get the current configuration of content protection
+ **
+ ** Returns          TRUE if the current streaming has CP, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_cp_is_active(void);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_get_flag
+ **
+ ** Description      Get content protection flag
+ **                  BTA_AV_CP_SCMS_COPY_NEVER
+ **                  BTA_AV_CP_SCMS_COPY_ONCE
+ **                  BTA_AV_CP_SCMS_COPY_FREE
+ **
+ ** Returns          The current flag value
+ **
+ *******************************************************************************/
+UINT8 bta_av_co_cp_get_flag(void);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_cp_set_flag
+ **
+ ** Description      Set content protection flag
+ **                  BTA_AV_CP_SCMS_COPY_NEVER
+ **                  BTA_AV_CP_SCMS_COPY_ONCE
+ **                  BTA_AV_CP_SCMS_COPY_FREE
+ **
+ ** Returns          TRUE if setting the SCMS flag is supported else FALSE
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_cp_set_flag(UINT8 cp_flag);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_reset
+ **
+ ** Description      Reset the current codec configuration
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void bta_av_co_audio_codec_reset(void);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_codec_supported
+ **
+ ** Description      Check if all opened connections are compatible with a codec
+ **                  configuration
+ **
+ ** Returns          TRUE if all opened devices support this codec, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_codec_supported(tBTIF_STATUS *p_status);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_set_codec
+ **
+ ** Description      Set the current codec configuration from the feeding type.
+ **                  This function is starting to modify the configuration, it
+ **                  should be protected.
+ **
+ ** Returns          TRUE if successful, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_set_codec(const tBTIF_AV_MEDIA_FEEDINGS *p_feeding, tBTIF_STATUS *p_status);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_get_sbc_config
+ **
+ ** Description      Retrieves the SBC codec configuration.  If the codec in use
+ **                  is not SBC, return the default SBC codec configuration.
+ **
+ ** Returns          TRUE if codec is SBC, FALSE otherwise
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_audio_get_sbc_config(tA2D_SBC_CIE *p_sbc_config, UINT16 *p_minmtu);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_audio_discard_config
+ **
+ ** Description      Discard the codec configuration of a connection
+ **
+ ** Returns          Nothing
+ **
+ *******************************************************************************/
+void bta_av_co_audio_discard_config(tBTA_AV_HNDL hndl);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_init
+ **
+ ** Description      Initialization
+ **
+ ** Returns          Nothing
+ **
+ *******************************************************************************/
+void bta_av_co_init(void);
+
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_peer_cp_supported
+ **
+ ** Description      Checks if the peer supports CP
+ **
+ ** Returns          TRUE if the peer supports CP
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_peer_cp_supported(tBTA_AV_HNDL hndl);
+
+/*******************************************************************************
+ **
+ ** Function         bta_av_co_get_remote_bitpool_pref
+ **
+ ** Description      Check if remote side did a setconfig within the limits
+ **                  of our exported bitpool range. If set we will set the
+ **                  remote preference.
+ **
+ ** Returns          TRUE if config set, FALSE otherwize
+ **
+ *******************************************************************************/
+BOOLEAN bta_av_co_get_remote_bitpool_pref(UINT8 *min, UINT8 *max);
+
+#endif
diff --git a/btif/include/btif_common.h b/btif/include/btif_common.h
new file mode 100644
index 0000000..7f3b039
--- /dev/null
+++ b/btif/include/btif_common.h
@@ -0,0 +1,183 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_COMMON_H
+#define BTIF_COMMON_H
+
+#include "data_types.h"
+#include "bt_types.h"
+#include "bta_api.h"
+
+#ifndef LOG_TAG
+#error "LOG_TAG not defined, please add in .c file prior to including bt_common.h"
+#endif
+
+#include <utils/Log.h>
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define ASSERTC(cond, msg, val) if (!(cond)) { ALOGE( \
+    "### ASSERT : %s line %d %s (%d) ###", __FILE__, __LINE__, msg, val);}
+
+/* Calculate start of event enumeration; id is top 8 bits of event */
+#define BTIF_SIG_START(id)       ((id) << 8)
+
+/* For upstream the MSB bit is always SET */
+#define BTIF_SIG_CB_BIT   (0x8000)
+#define BTIF_SIG_CB_START(id)    (((id) << 8) | BTIF_SIG_CB_BIT)
+
+/* BTIF sub-systems */
+#define BTIF_CORE           0
+#define BTIF_DM             1
+#define BTIF_HFP            2
+#define BTIF_AV             3
+#define BTIF_PAN            4
+
+extern bt_callbacks_t *bt_hal_cbacks;
+
+#define HAL_CBACK(P_CB, P_CBACK, ...)\
+    if (P_CB && P_CB->P_CBACK) {            \
+        ALOGD("HAL %s->%s", #P_CB, #P_CBACK); \
+        P_CB->P_CBACK(__VA_ARGS__);         \
+    }                                       \
+    else {                                  \
+        ASSERTC(0, "Callback is NULL", 0);  \
+    }
+
+/**
+ * BTIF events for requests that require context switch to btif task
+ * on downstreams path
+ */
+enum
+{
+    BTIF_CORE_API_START = BTIF_SIG_START(BTIF_CORE),
+    BTIF_CORE_STORAGE_NO_ACTION,
+    BTIF_CORE_STORAGE_ADAPTER_WRITE,
+    BTIF_CORE_STORAGE_ADAPTER_READ,
+    BTIF_CORE_STORAGE_ADAPTER_READ_ALL,
+    BTIF_CORE_STORAGE_REMOTE_WRITE,
+    BTIF_CORE_STORAGE_REMOTE_READ,
+    BTIF_CORE_STORAGE_REMOTE_READ_ALL,
+    BTIF_CORE_STORAGE_READ_ALL,
+    BTIF_CORE_STORAGE_NOTIFY_STATUS,
+    /* add here */
+
+    BTIF_DM_API_START = BTIF_SIG_START(BTIF_DM),
+    BTIF_DM_ENABLE_SERVICE,
+    BTIF_DM_DISABLE_SERVICE,
+    /* add here */
+
+    BTIF_HFP_API_START = BTIF_SIG_START(BTIF_HFP),
+    /* add here */
+
+    BTIF_AV_API_START = BTIF_SIG_START(BTIF_AV),
+    /* add here */
+};
+
+/**
+ * BTIF events for callbacks that require context switch to btif task
+ * on upstream path - Typically these would be non-BTA events
+ * that are generated by the BTIF layer.
+ */
+enum
+{
+    BTIF_CORE_CB_START = BTIF_SIG_CB_START(BTIF_CORE),
+    /* add here */
+
+    BTIF_DM_CB_START = BTIF_SIG_CB_START(BTIF_DM),
+    BTIF_DM_CB_DISCOVERY_STARTED, /* Discovery has started */
+    BTIF_DM_CB_CREATE_BOND,   /* Create bond */
+    BTIF_DM_CB_REMOVE_BOND,   /*Remove bond */
+    BTIF_DM_CB_HID_REMOTE_NAME,   /* Remote name callback for HID device */
+    BTIF_DM_CB_BOND_STATE_BONDING,
+
+    BTIF_HFP_CB_START  = BTIF_SIG_CB_START(BTIF_HFP),
+    BTIF_HFP_CB_AUDIO_CONNECTING, /* HF AUDIO connect has been sent to BTA successfully */
+
+    BTIF_PAN_CB_START = BTIF_SIG_CB_START(BTIF_PAN),
+    BTIF_PAN_CB_DISCONNECTING, /* PAN Disconnect has been sent to BTA successfully */
+};
+
+/* Macro definitions for BD ADDR persistence */
+
+/**
+ * PROPERTY_BT_BDADDR_PATH
+ * The property key stores the storage location of Bluetooth Device Address
+ */
+#ifndef PROPERTY_BT_BDADDR_PATH
+#define PROPERTY_BT_BDADDR_PATH         "ro.bt.bdaddr_path"
+#endif
+
+/**
+ * PERSIST_BDADDR_PROPERTY
+ * If there is no valid bdaddr available from PROPERTY_BT_BDADDR_PATH,
+ * generating a random BDADDR and keeping it in the PERSIST_BDADDR_DROP.
+ */
+#ifndef PERSIST_BDADDR_PROPERTY
+#define PERSIST_BDADDR_PROPERTY         "persist.service.bdroid.bdaddr"
+#endif
+
+#define FACTORY_BT_BDADDR_STORAGE_LEN   17
+
+
+/*******************************************************************************
+**  Type definitions for callback functions
+********************************************************************************/
+
+typedef void (tBTIF_CBACK) (UINT16 event, char *p_param);
+typedef void (tBTIF_COPY_CBACK) (UINT16 event, char *p_dest, char *p_src);
+
+
+/*******************************************************************************
+**  Type definitions and return values
+********************************************************************************/
+
+/* this type handles all btif context switches between BTU and HAL */
+typedef struct
+{
+    BT_HDR               hdr;
+    tBTIF_CBACK*         p_cb;    /* context switch callback */
+
+    /* parameters passed to callback */
+    UINT16               event;   /* message event id */
+    char                 p_param[0]; /* parameter area needs to be last */
+} tBTIF_CONTEXT_SWITCH_CBACK;
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+bt_status_t btif_transfer_context (tBTIF_CBACK *p_cback, UINT16 event, char* p_params,
+                                    int param_len, tBTIF_COPY_CBACK *p_copy_cback);
+tBTA_SERVICE_MASK btif_get_enabled_services_mask(void);
+bt_status_t btif_enable_service(tBTA_SERVICE_ID service_id);
+bt_status_t btif_disable_service(tBTA_SERVICE_ID service_id);
+int btif_is_enabled(void);
+
+/**
+ * BTIF_Events
+ */
+void btif_enable_bluetooth_evt(tBTA_STATUS status, BD_ADDR local_bd);
+void btif_disable_bluetooth_evt(void);
+void btif_adapter_properties_evt(bt_status_t status, uint32_t num_props, bt_property_t *p_props);
+void btif_remote_properties_evt(bt_status_t status, bt_bdaddr_t *remote_addr,
+                                   uint32_t num_props, bt_property_t *p_props);
+#endif /* BTIF_COMMON_H */
diff --git a/btif/include/btif_config.h b/btif/include/btif_config.h
new file mode 100644
index 0000000..8fc9eb2
--- /dev/null
+++ b/btif/include/btif_config.h
@@ -0,0 +1,77 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_config.h
+ *
+ *  Description:   Bluetooth configuration Interface
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_CONFIG_H
+#define BTIF_CONFIG_H
+
+#ifdef __cplusplus
+#include <stdint.h>
+extern "C" {
+#endif
+
+/*******************************************************************************
+** Constants & Macros
+********************************************************************************/
+
+#define BTIF_CFG_TYPE_INVALID   0
+#define BTIF_CFG_TYPE_STR       1
+#define BTIF_CFG_TYPE_INT      (1 << 1)
+#define BTIF_CFG_TYPE_BIN      (1 << 2)
+#define BTIF_CFG_TYPE_VOLATILE (1 << 15)
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+int btif_config_init();
+
+int btif_config_exist(const char* section, const char* key, const char* name);
+int btif_config_get_int(const char* section, const char* key, const char* name, int* value);
+int btif_config_set_int(const char* section, const char* key, const char* name, int value);
+int btif_config_get_str(const char* section, const char* key, const char* name, char* value, int* bytes);
+int btif_config_set_str(const char* section, const char* key, const char* name, const char* value);
+
+int btif_config_get(const char* section, const char* key, const char* name, char* value, int* bytes, int* type);
+int btif_config_set(const char* section, const char* key, const char* name, const char*  value, int bytes, int type);
+
+int btif_config_remove(const char* section, const char* key, const char* name);
+
+short btif_config_next_key(short current_key_pos, const char* section, char * key_name, int* key_name_bytes);
+short btif_config_next_value(short pos, const char* section, const char* key, char* value_name, int* value_name_bytes);
+
+typedef void (*btif_config_enum_callback)(void* user_data, const char* section, const char* key, const char* name,
+                                          const char*  value, int bytes, int type);
+int btif_config_enum(btif_config_enum_callback cb, void* user_data);
+
+int btif_config_save();
+void btif_config_flush();
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/btif/include/btif_config_util.h b/btif/include/btif_config_util.h
new file mode 100644
index 0000000..3a2f53e
--- /dev/null
+++ b/btif/include/btif_config_util.h
@@ -0,0 +1,62 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_config_util.h
+ *
+ *  Description:   Bluetooth configuration utility api
+ *
+ ***********************************************************************************/
+
+#ifndef BTIF_CONFIG_UTIL_H
+#define BTIF_CONFIG_UTIL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+** Constants & Macros
+********************************************************************************/
+
+#define BLUEZ_PATH "/data/misc/bluetoothd/"
+#define BLUEZ_PATH_BAK "/data/misc/bluetoothd_bak"
+#define BLUEZ_LINKKEY  "linkkeys"
+#define BLUEZ_NAMES "names"
+#define BLUEZ_PROFILES "profiles"
+#define BLUEZ_CLASSES "classes"
+#define BLUEZ_TYPES "types"
+#define BLUEZ_CONFIG "config"
+#define BLUEZ_ALIASES "aliases"
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+int btif_config_save_file(const char* file_name);
+int btif_config_load_file(const char* file_name);
+int load_bluez_adapter_info(char* adapter_path, int size);
+int load_bluez_linkkeys(const char* adapter_path);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/btif/include/btif_dm.h b/btif/include/btif_dm.h
new file mode 100644
index 0000000..2d73c45
--- /dev/null
+++ b/btif/include/btif_dm.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_DM_H
+#define BTIF_DM_H
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+/**
+ * BTIF callback to switch context from bte to btif
+ */
+void bte_dm_evt(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data);
+
+/**
+ * Notify BT disable being initiated. DM may chose to abort
+ * pending commands, like pairing
+ */
+void btif_dm_on_disable(void);
+
+/**
+ * Out-of-band functions
+ */
+#if (BTM_OOB_INCLUDED == TRUE)
+void btif_dm_set_oob_for_io_req(tBTA_OOB_DATA  *p_oob_data);
+#ifdef BTIF_DM_OOB_TEST
+void btif_dm_load_local_oob(void);
+void btif_dm_proc_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r);
+BOOLEAN btif_dm_proc_rmt_oob(BD_ADDR bd_addr,  BT_OCTET16 p_c, BT_OCTET16 p_r);
+#endif /* BTIF_DM_OOB_TEST */
+#endif /* BTM_OOB_INCLUDED */
+
+#endif
diff --git a/btif/include/btif_hh.h b/btif/include/btif_hh.h
new file mode 100644
index 0000000..4f31002
--- /dev/null
+++ b/btif/include/btif_hh.h
@@ -0,0 +1,102 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_HH_H
+#define BTIF_HH_H
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hh.h>
+#include <stdint.h>
+#include "bta_hh_api.h"
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define BTIF_HH_MAX_HID         8
+#define BTIF_HH_MAX_ADDED_DEV   32
+
+#define BTIF_HH_MAX_KEYSTATES            3
+#define BTIF_HH_KEYSTATE_MASK_NUMLOCK    0x01
+#define BTIF_HH_KEYSTATE_MASK_CAPSLOCK   0x02
+#define BTIF_HH_KEYSTATE_MASK_SCROLLLOCK 0x04
+
+
+/*******************************************************************************
+**  Type definitions and return values
+********************************************************************************/
+
+typedef enum
+{
+    BTIF_HH_DISABLED =   0,
+    BTIF_HH_ENABLED,
+    BTIF_HH_DISABLING,
+    BTIF_HH_DEV_UNKNOWN,
+    BTIF_HH_DEV_CONNECTING,
+    BTIF_HH_DEV_CONNECTED,
+    BTIF_HH_DEV_DISCONNECTED
+} BTIF_HH_STATUS;
+
+typedef struct
+{
+    bthh_connection_state_t       dev_status;
+    UINT8                         dev_handle;
+    bt_bdaddr_t                   bd_addr;
+    tBTA_HH_ATTR_MASK             attr_mask;
+    UINT8                         sub_class;
+    UINT8                         app_id;
+    int                           fd;
+    BT_HDR                        *p_buf;
+} btif_hh_device_t;
+
+/* Control block to maintain properties of devices */
+typedef struct
+{
+    UINT8             dev_handle;
+    bt_bdaddr_t       bd_addr;
+    tBTA_HH_ATTR_MASK attr_mask;
+} btif_hh_added_device_t;
+
+/**
+ * BTIF-HH control block to maintain added devices and currently
+ * connected hid devices
+ */
+typedef struct
+{
+    BTIF_HH_STATUS          status;
+    btif_hh_device_t        devices[BTIF_HH_MAX_HID];
+    UINT32                  device_num;
+    btif_hh_added_device_t  added_devices[BTIF_HH_MAX_ADDED_DEV];
+    btif_hh_device_t        *p_curr_dev;
+} btif_hh_cb_t;
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+extern btif_hh_cb_t btif_hh_cb;
+
+extern btif_hh_device_t *btif_hh_find_connected_dev_by_handle(UINT8 handle);
+extern void btif_hh_remove_device(bt_bdaddr_t bd_addr);
+extern bt_status_t btif_hh_virtual_unplug(bt_bdaddr_t *bd_addr);
+extern void btif_hh_disconnect(bt_bdaddr_t *bd_addr);
+
+BOOLEAN btif_hh_add_added_dev(bt_bdaddr_t bd_addr, tBTA_HH_ATTR_MASK attr_mask);
+
+#endif
diff --git a/btif/include/btif_hl.h b/btif/include/btif_hl.h
new file mode 100644
index 0000000..0573082
--- /dev/null
+++ b/btif/include/btif_hl.h
@@ -0,0 +1,366 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_HL_H
+#define BTIF_HL_H
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define BTIF_HL_DATA_TYPE_NONE               0x0000
+#define BTIF_HL_DATA_TYPE_PULSE_OXIMETER     0x1004   /* from BT assigned number */
+#define BTIF_HL_DATA_TYPE_BLOOD_PRESSURE_MON 0x1007
+#define BTIF_HL_DATA_TYPE_BODY_THERMOMETER   0x1008
+#define BTIF_HL_DATA_TYPE_BODY_WEIGHT_SCALE  0x100F
+#define BTIF_HL_DATA_TYPE_GLUCOSE_METER      0x1011
+#define BTIF_HL_DATA_TYPE_STEP_COUNTER       0x1068
+
+#define BTIF_HL_CCH_NUM_FILTER_ELEMS            3
+#define BTIF_HL_APPLICATION_NAME_LEN          512
+
+#define BTIF_HL_NV_MAX_APPS   16
+
+
+/*******************************************************************************
+**  Type definitions and return values
+********************************************************************************/
+
+typedef enum
+{
+    BTIF_HL_SOC_STATE_IDLE,
+    BTIF_HL_SOC_STATE_W4_ADD,
+    BTIF_HL_SOC_STATE_W4_CONN,
+    BTIF_HL_SOC_STATE_W4_READ,
+    BTIF_HL_SOC_STATE_W4_REL
+} btif_hl_soc_state_t;
+
+typedef enum
+{
+    BTIF_HL_STATE_DISABLED,
+    BTIF_HL_STATE_DISABLING,
+    BTIF_HL_STATE_ENABLED,
+    BTIF_HL_STATE_ENABLING,
+} btif_hl_state_t;
+
+typedef enum
+{
+    BTIF_HL_CCH_OP_NONE,
+    BTIF_HL_CCH_OP_MDEP_FILTERING,
+    BTIF_HL_CCH_OP_MATCHED_CTRL_PSM,
+    BTIF_HL_CCH_OP_DCH_OPEN,
+    BTIF_HL_CCH_OP_DCH_RECONNECT,
+    BTIF_HL_CCH_OP_DCH_ECHO_TEST
+} btif_hl_cch_op_t;
+
+typedef enum
+{
+    BTIF_HL_PEND_DCH_OP_NONE,
+    BTIF_HL_PEND_DCH_OP_DELETE_MDL,
+    BTIF_HL_PEND_DCH_OP_OPEN,
+    BTIF_HL_PEND_DCH_OP_RECONNECT
+} btif_hl_pend_dch_op_t;
+
+typedef enum
+{
+    BTIF_HL_DCH_OP_NONE,
+    BTIF_HL_DCH_OP_DISC
+} btif_hl_dch_op_t;
+
+typedef enum
+{
+    BTIF_HL_CHAN_CB_STATE_NONE,
+    BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING,
+    BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING,
+
+    BTIF_HL_CHAN_CB_STATE_DISCONNECTING_PENDING,
+    BTIF_HL_CHAN_CB_STATE_DISCONNECTED_PENDING,
+    BTIF_HL_CHAN_CB_STATE_DESTROYED_PENDING,
+} btif_hl_chan_cb_state_t;
+
+enum
+{
+    BTIF_HL_SEND_CONNECTED_CB,
+    BTIF_HL_SEND_DISCONNECTED_CB,
+    BTIF_HL_REG_APP,
+    BTIF_HL_UNREG_APP,
+    BTIF_HL_UPDATE_MDL,
+};
+
+typedef struct
+{
+    UINT8 mdep_cfg_idx;
+    int data_type;
+    tBTA_HL_MDEP_ID peer_mdep_id;
+} btif_hl_extra_mdl_cfg_t;
+
+typedef struct
+{
+    tBTA_HL_MDL_CFG         base;
+    btif_hl_extra_mdl_cfg_t extra;
+} btif_hl_mdl_cfg_t;
+
+typedef struct
+{
+    btif_hl_mdl_cfg_t       mdl_cfg[BTA_HL_NUM_MDL_CFGS];
+} btif_hl_nv_mdl_data_t;
+
+typedef struct
+{
+    tBTA_HL_SUP_FEATURE     sup_feature;
+    tBTA_HL_DCH_CFG         channel_type[BTA_HL_NUM_MDEPS];
+    char                    srv_name[BTA_SERVICE_NAME_LEN +1];
+    char                    srv_desp[BTA_SERVICE_DESP_LEN +1];
+    char                    provider_name[BTA_PROVIDER_NAME_LEN +1];
+    char                    application_name[BTIF_HL_APPLICATION_NAME_LEN +1];
+} btif_hl_nv_app_data_t;
+
+typedef struct
+{
+    BOOLEAN in_use;
+    UINT16  use_freq;
+} btif_hl_nv_app_t;
+
+typedef struct
+{
+    btif_hl_nv_app_t   app[BTIF_HL_NV_MAX_APPS];
+} btif_hl_nv_app_cb_t;
+
+typedef struct
+{
+    UINT8 app_nv_idx;
+    BOOLEAN active;
+    UINT8 app_idx;
+    btif_hl_nv_app_data_t   app_data;
+} btif_hl_app_data_t;
+
+typedef struct
+{
+    BOOLEAN                 is_app_read;
+    btif_hl_nv_app_cb_t     app_cb;
+    BUFFER_Q                app_queue;
+} btif_hl_nv_cb_t;
+
+typedef struct
+{
+    int                     channel_id;
+    BD_ADDR                 bd_addr;
+    UINT8                   mdep_cfg_idx;
+    int                     max_s;
+    int                     socket_id[2];
+    UINT8                   app_idx;
+    UINT8                   mcl_idx;
+    UINT8                   mdl_idx;
+    btif_hl_soc_state_t     state;
+}btif_hl_soc_cb_t;
+
+typedef struct
+{
+    UINT16                  data_type;
+    UINT16                  max_tx_apdu_size;
+    UINT16                  max_rx_apdu_size;
+} btif_hl_data_type_cfg_t;
+
+typedef struct
+{
+    UINT16                  data_type;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+} btif_hl_filter_elem_t;
+
+typedef struct
+{
+    UINT8                   num_elems;
+    btif_hl_filter_elem_t   elem[BTIF_HL_CCH_NUM_FILTER_ELEMS];
+} btif_hl_cch_filter_t;
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    UINT16                  mdl_id;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    btif_hl_dch_op_t        dch_oper;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    UINT8                   local_mdep_cfg_idx;
+    tBTA_HL_DCH_CFG         local_cfg;
+    tBTA_HL_MDEP_ID         peer_mdep_id;
+    UINT16                  peer_data_type;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+    tBTA_HL_DCH_MODE        dch_mode;
+    tBTA_SEC                sec_mask;
+    BOOLEAN                 is_the_first_reliable;
+    BOOLEAN                 delete_mdl;
+    UINT16                  mtu;
+    tMCA_CHNL_CFG           chnl_cfg;
+    UINT16                  tx_size;
+    UINT8                   *p_tx_pkt;
+    UINT8                   *p_rx_pkt;
+    BOOLEAN                 cong;
+    btif_hl_soc_cb_t        *p_scb;
+    int                     channel_id;
+} btif_hl_mdl_cb_t;
+
+typedef struct
+{
+    int                     channel_id;
+    int                     mdep_cfg_idx;
+    BOOLEAN                 in_use;
+    btif_hl_chan_cb_state_t cb_state;
+    btif_hl_pend_dch_op_t   op;
+    BD_ADDR                 bd_addr;
+    BOOLEAN                 abort_pending;
+} btif_hl_pending_chan_cb_t;
+
+typedef struct
+{
+    btif_hl_mdl_cb_t        mdl[BTA_HL_NUM_MDLS_PER_MCL];
+    BOOLEAN                 in_use;
+    BOOLEAN                 is_connected;
+    UINT16                  req_ctrl_psm;
+    UINT16                  ctrl_psm;
+    UINT16                  data_psm;
+    BD_ADDR                 bd_addr;
+    UINT16                  cch_mtu;
+    tBTA_SEC                sec_mask;
+    tBTA_HL_MCL_HANDLE      mcl_handle;
+    btif_hl_pending_chan_cb_t pcb;
+    BOOLEAN                 valid_sdp_idx;
+    UINT8                   sdp_idx;
+    tBTA_HL_SDP             sdp;
+    btif_hl_cch_op_t        cch_oper;
+    BOOLEAN                 cch_timer_active;
+    TIMER_LIST_ENT          cch_timer;
+} btif_hl_mcl_cb_t;
+
+typedef struct
+{
+    BOOLEAN                 active;
+    UINT16                  mdl_id;
+    UINT8                   mdep_cfg_idx;
+    BD_ADDR                 bd_addr;
+    int                     channel_id;
+} btif_hl_delete_mdl_t;
+
+typedef struct
+{
+    btif_hl_mcl_cb_t        mcb[BTA_HL_NUM_MCLS]; /* application Control Blocks */
+    BOOLEAN                 in_use;              /* this CB is in use*/
+    BOOLEAN                 reg_pending;
+    BOOLEAN                 is_new_app;
+    UINT8                   app_nv_idx;
+    UINT8                   app_id;
+
+    tBTA_HL_SUP_FEATURE     sup_feature;
+    tBTA_HL_DCH_CFG         channel_type[BTA_HL_NUM_MDEPS];
+    tBTA_HL_SDP_INFO_IND    sdp_info_ind;
+    btif_hl_cch_filter_t    filter;
+
+    btif_hl_mdl_cfg_t       mdl_cfg[BTA_HL_NUM_MDL_CFGS];
+    int                     mdl_cfg_channel_id[BTA_HL_NUM_MDL_CFGS];
+
+    btif_hl_delete_mdl_t    delete_mdl;
+    tBTA_HL_DEVICE_TYPE     dev_type;
+    tBTA_HL_APP_HANDLE      app_handle;
+    UINT16                  sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
+    char                    srv_name[BTA_SERVICE_NAME_LEN +1];        /* service name to be used in the SDP; null terminated*/
+    char                    srv_desp[BTA_SERVICE_DESP_LEN +1];        /* service description to be used in the SDP; null terminated */
+    char                    provider_name[BTA_PROVIDER_NAME_LEN +1];   /* provide name to be used in the SDP; null terminated */
+    char                    application_name[BTIF_HL_APPLICATION_NAME_LEN +1];   /* applicaiton name */
+} btif_hl_app_cb_t;
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    UINT8                   app_idx;
+} btif_hl_pending_reg_cb_t;
+
+/* BTIF-HL control block  */
+typedef struct
+{
+    btif_hl_app_cb_t        acb[BTA_HL_NUM_APPS];      /* HL Control Blocks */
+    tBTA_HL_CTRL_CBACK      *p_ctrl_cback;             /* pointer to control callback function */
+    UINT8                   next_app_id;
+    UINT16                  next_channel_id;
+    btif_hl_state_t         state;
+    btif_hl_nv_cb_t         ncb;
+} btif_hl_cb_t;
+
+typedef UINT8 btif_hl_evt_t;
+
+typedef struct
+{
+    int                     app_id;
+    BD_ADDR                 bd_addr;
+    int                     mdep_cfg_index;
+    int                     channel_id;
+    btif_hl_chan_cb_state_t cb_state;
+    int                     fd;
+} btif_hl_send_chan_state_cb_t;
+
+
+typedef struct
+{
+    UINT8 app_idx;
+} btif_hl_reg_t;
+
+typedef btif_hl_reg_t btif_hl_unreg_t;
+typedef btif_hl_reg_t btif_hl_update_mdl_t;
+
+typedef union
+{
+    btif_hl_send_chan_state_cb_t    chan_cb;
+    btif_hl_reg_t           reg;
+    btif_hl_unreg_t         unreg;
+    btif_hl_update_mdl_t    update_mdl;
+} btif_hl_evt_cb_t;
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+#define BTIF_HL_GET_CB_PTR() &(btif_hl_cb)
+#define BTIF_HL_GET_APP_CB_PTR(app_idx) &(btif_hl_cb.acb[(app_idx)])
+#define BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)])
+#define BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)].mdl[mdl_idx])
+#define BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[app_idx].mcb[mcl_idx].pcb)
+#define BTIF_HL_GET_MDL_CFG_PTR(app_idx, item_idx) &(btif_hl_cb.acb[(app_idx)].mdl_cfg[(item_idx)])
+#define BTIF_HL_GET_MDL_CFG_CHANNEL_ID_PTR(app_idx, item_idx) &(btif_hl_cb.acb[(app_idx)].mdl_cfg_channel_id[(item_idx)])
+
+extern btif_hl_cb_t  btif_hl_cb;
+extern btif_hl_cb_t *p_btif_hl_cb;
+extern btif_hl_nv_cb_t *p_ncb;
+
+extern BOOLEAN btif_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx);
+extern BOOLEAN btif_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx);
+extern BOOLEAN btif_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx);
+extern BOOLEAN btif_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                          UINT8 *p_mdl_idx);
+extern BOOLEAN btif_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle,
+                                                  UINT8 *p_app_idx, UINT8 *p_mcl_idx);
+extern BOOLEAN  btif_hl_save_mdl_cfg(UINT8 app_id, UINT8 item_idx, tBTA_HL_MDL_CFG *p_mdl_cfg);
+extern BOOLEAN  btif_hl_delete_mdl_cfg(UINT8 app_id, UINT8 item_idx);
+extern void * btif_hl_get_buf(UINT16 size);
+extern void btif_hl_free_buf(void **p);
+extern BOOLEAN btif_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle,
+                                                 UINT8 *p_app_idx,UINT8 *p_mcl_idx,
+                                                 UINT8 *p_mdl_idx);
+extern void btif_hl_abort_pending_chan_setup(UINT8 app_idx, UINT8 mcl_idx);
+extern BOOLEAN btif_hl_proc_pending_op(UINT8 app_idx, UINT8 mcl_idx);
+extern BOOLEAN btif_hl_load_mdl_config (UINT8 app_id, UINT8 buffer_size,
+                                        tBTA_HL_MDL_CFG *p_mdl_buf );
+#endif
diff --git a/btif/include/btif_media.h b/btif/include/btif_media.h
new file mode 100644
index 0000000..b3b72e7
--- /dev/null
+++ b/btif/include/btif_media.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_media.h
+ *
+ *  Description:   This is the audio module for the BTIF system.
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_MEDIA_H
+#define BTIF_MEDIA_H
+
+#include "bta_api.h"
+#include "bd.h"
+#include "gki.h"
+#include "btif_av_api.h"
+#include "audio_a2dp_hw.h"
+
+/*******************************************************************************
+ **  Constants
+ *******************************************************************************/
+
+/* Generic part */
+#define BTIF_SUCCESS                         0
+
+/**
+ * AV (Audio Video source) Errors
+ */
+#define BTIF_ERROR_SRV_AV_NOT_ENABLED        700     /* AV is not enabled */
+#define BTIF_ERROR_SRV_AV_FEEDING_NOT_SUPPORTED 701  /* Requested Feeding not supported */
+#define BTIF_ERROR_SRV_AV_BUSY               702     /* Another operation ongoing */
+#define BTIF_ERROR_SRV_AV_NOT_OPENED         703     /* No AV link opened */
+#define BTIF_ERROR_SRV_AV_NOT_STARTED        704     /* AV is not started */
+#define BTIF_ERROR_SRV_AV_CP_NOT_SUPPORTED   705     /* Content protection is not supported by all headsets */
+
+/* Transcoding definition for TxTranscoding and RxTranscoding */
+#define BTIF_MEDIA_TRSCD_OFF             0
+#define BTIF_MEDIA_TRSCD_PCM_2_SBC       1  /* Tx */
+
+
+/*******************************************************************************
+ **  Data types
+ *******************************************************************************/
+
+typedef int tBTIF_STATUS;
+
+/* tBTIF_MEDIA_INIT_AUDIO msg structure */
+typedef struct
+{
+        BT_HDR hdr;
+        UINT16 SamplingFreq; /* 16k, 32k, 44.1k or 48k*/
+        UINT8 ChannelMode; /* mono, dual, stereo or joint stereo*/
+        UINT8 NumOfSubBands; /* 4 or 8 */
+        UINT8 NumOfBlocks; /* 4, 8, 12 or 16*/
+        UINT8 AllocationMethod; /* loudness or SNR*/
+        UINT16 MtuSize; /* peer mtu size */
+} tBTIF_MEDIA_INIT_AUDIO;
+
+#if (BTA_AV_INCLUDED == TRUE)
+/* tBTIF_MEDIA_UPDATE_AUDIO msg structure */
+typedef struct
+{
+        BT_HDR hdr;
+        UINT16 MinMtuSize; /* Minimum peer mtu size */
+        UINT8 MaxBitPool; /* Maximum peer bitpool */
+        UINT8 MinBitPool; /* Minimum peer bitpool */
+} tBTIF_MEDIA_UPDATE_AUDIO;
+
+/* tBTIF_MEDIA_INIT_AUDIO_FEEDING msg structure */
+typedef struct
+{
+        BT_HDR hdr;
+        tBTIF_AV_FEEDING_MODE feeding_mode;
+        tBTIF_AV_MEDIA_FEEDINGS feeding;
+} tBTIF_MEDIA_INIT_AUDIO_FEEDING;
+#endif
+
+
+/*******************************************************************************
+ **  Public functions
+ *******************************************************************************/
+
+/*******************************************************************************
+ **
+ ** Function         btif_av_task
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+extern int btif_media_task(void *p);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_enc_init_req
+ **
+ ** Description      Request to initialize the media task encoder
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern BOOLEAN btif_media_task_enc_init_req(tBTIF_MEDIA_INIT_AUDIO * p_msg);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_enc_update_req
+ **
+ ** Description      Request to update the media task encoder
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+#if (BTA_AV_INCLUDED == TRUE)
+extern BOOLEAN btif_media_task_enc_update_req(tBTIF_MEDIA_UPDATE_AUDIO * p_msg);
+#endif
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_start_aa_req
+ **
+ ** Description      Request to start audio encoding task
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern BOOLEAN btif_media_task_start_aa_req(void);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_stop_aa_req
+ **
+ ** Description      Request to stop audio encoding task
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern BOOLEAN btif_media_task_stop_aa_req(void);
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_tx_flush_req
+ **
+ ** Description      Request to flush audio encoding pipe
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern BOOLEAN btif_media_task_aa_tx_flush_req(void);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_readbuf
+ **
+ ** Description      Read an audio GKI buffer from the BTIF media TX queue
+ **
+ ** Returns          pointer on a GKI aa buffer ready to send
+ **
+ *******************************************************************************/
+extern BT_HDR *btif_media_aa_readbuf(void);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_writebuf
+ **
+ ** Description      Enqueue a Advance Audio media GKI buffer to be processed by btif media task.
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern void btif_media_aa_writebuf(BT_HDR *pBuf, UINT32 timestamp, UINT16 seq_num);
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_av_writebuf
+ **
+ ** Description      Enqueue a video media GKI buffer to be processed by btif media task.
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+extern BOOLEAN btif_media_av_writebuf(UINT8 *p_media, UINT32 media_len,
+                                     UINT32 timestamp, UINT16 seq_num);
+
+#if (BTA_AV_INCLUDED == TRUE)
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_audio_feeding_init_req
+ **
+ ** Description      Request to initialize audio feeding
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+
+extern BOOLEAN btif_media_task_audio_feeding_init_req(tBTIF_MEDIA_INIT_AUDIO_FEEDING *p_msg);
+#endif
+
+/*******************************************************************************
+ **
+ ** Function         dump_codec_info
+ **
+ ** Description      Decode and display codec_info (for debug)
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+extern void dump_codec_info(unsigned char *p_codec);
+
+/**
+ * Local adaptation helper functions between btif and media task
+ */
+
+int btif_a2dp_start_media_task(void);
+void btif_a2dp_stop_media_task(void);
+
+void btif_a2dp_on_init(void);
+void btif_a2dp_setup_codec(void);
+void btif_a2dp_on_idle(void);
+void btif_a2dp_on_open(void);
+void btif_a2dp_on_started(tBTA_AV_START *p_av);
+void btif_a2dp_on_stop_req(void);
+void btif_a2dp_on_stopped(tBTA_AV_SUSPEND *p_av);
+void btif_a2dp_on_suspend(void);
+void btif_a2dp_on_suspended(tBTA_AV_SUSPEND *p_av);
+void btif_a2dp_set_tx_flush(BOOLEAN enable);
+
+void btif_media_check_iop_exceptions(UINT8 *peer_bda);
+
+#endif
diff --git a/btif/include/btif_pan.h b/btif/include/btif_pan.h
new file mode 100644
index 0000000..d9ecb2e
--- /dev/null
+++ b/btif/include/btif_pan.h
@@ -0,0 +1,36 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_pan.h
+ *
+ *  Description:   Bluetooth pan Interface
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_PAN_H
+#define BTIF_PAN_H
+
+#include <hardware/bt_pan.h>
+
+btpan_interface_t *btif_pan_interface();
+void btif_pan_init();
+void btif_pan_cleanup();
+
+#endif
diff --git a/btif/include/btif_pan_internal.h b/btif/include/btif_pan_internal.h
new file mode 100644
index 0000000..d697ac8
--- /dev/null
+++ b/btif/include/btif_pan_internal.h
@@ -0,0 +1,118 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_pan_internal.h
+ *
+ *  Description:   Bluetooth pan internal
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_PAN_INTERNAL_H
+#define BTIF_PAN_INTERNAL_H
+
+#include "btif_pan.h"
+#include "bt_types.h"
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define PAN_NAP_SERVICE_NAME "Android Network Access Point"
+#define PANU_SERVICE_NAME "Android Network User"
+#define TAP_IF_NAME "bt-pan"
+#define ETH_ADDR_LEN        6
+#ifndef PAN_SECURITY
+#define PAN_SECURITY (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_IN_ENCRYPT | BTM_SEC_OUT_ENCRYPT)
+#endif
+
+#define PAN_STATE_UNKNOWN   0
+#define PAN_STATE_OPEN      1
+#define PAN_STATE_CLOSE     2
+#ifndef PAN_ROLE_INACTIVE
+#define PAN_ROLE_INACTIVE 0
+#endif
+
+
+/*******************************************************************************
+**  Type definitions and return values
+********************************************************************************/
+
+typedef struct eth_hdr
+{
+    unsigned char h_dest[ETH_ADDR_LEN];
+    unsigned char h_src[ETH_ADDR_LEN];
+    short         h_proto;
+} tETH_HDR;
+
+typedef struct
+{
+    int handle;
+    int state;
+    UINT16 protocol;
+    BD_ADDR peer;
+    int local_role;
+    int remote_role;
+    unsigned char eth_addr[ETH_ADDR_LEN];
+} btpan_conn_t;
+
+typedef struct
+{
+    int btl_if_handle;
+    int btl_if_handle_panu;
+    int tap_fd;
+    int enabled;
+    int open_count;
+    btpan_conn_t conns[MAX_PAN_CONNS];
+} btpan_cb_t;
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+extern btpan_cb_t btpan_cb;
+btpan_conn_t *btpan_new_conn(int handle, const BD_ADDR addr, int local_role, int peer_role);
+btpan_conn_t *btpan_find_conn_addr(const BD_ADDR addr);
+btpan_conn_t *btpan_find_conn_handle(UINT16 handle);
+int btpan_get_connected_count(void);
+int btpan_tap_open(void);
+void create_tap_read_thread(int tap_fd);
+void destroy_tap_read_thread(void);
+int btpan_tap_close(int tap_fd);
+int btpan_tap_send(int tap_fd, const BD_ADDR src, const BD_ADDR dst, UINT16 protocol,
+                   const char* buff, UINT16 size, BOOLEAN ext, BOOLEAN forward);
+
+static inline int is_empty_eth_addr(const BD_ADDR addr)
+{
+    int i;
+    for(i = 0; i < BD_ADDR_LEN; i++)
+        if(addr[i] != 0)
+            return 0;
+    return 1;
+}
+
+static inline int is_valid_bt_eth_addr(const BD_ADDR addr)
+{
+    if(is_empty_eth_addr(addr))
+        return 0;
+    return addr[0] & 1 ? 0 : 1; /* Cannot be multicasting address */
+}
+
+#endif
diff --git a/btif/include/btif_profile_queue.h b/btif/include/btif_profile_queue.h
new file mode 100644
index 0000000..931f457
--- /dev/null
+++ b/btif/include/btif_profile_queue.h
@@ -0,0 +1,37 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_profile_queue.h
+ *
+ *  Description:   Bluetooth remote device connection queuing
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_PROFILE_QUEUE_H
+#define BTIF_PROFILE_QUEUE_H
+
+typedef bt_status_t (btif_connect_cb_t) (bt_bdaddr_t *bda);
+
+bt_status_t btif_queue_connect(uint16_t uuid, const bt_bdaddr_t *bda,
+                        btif_connect_cb_t *connect_cb);
+void btif_queue_advance();
+void btif_queue_release();
+
+#endif
diff --git a/btif/include/btif_sm.h b/btif/include/btif_sm.h
new file mode 100644
index 0000000..baad0d9
--- /dev/null
+++ b/btif/include/btif_sm.h
@@ -0,0 +1,118 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  Filename:      btif_sm.h
+ *
+ *  Description:   Generic BTIF state machine API
+ *
+ *****************************************************************************/
+
+#ifndef BTIF_SM_H
+#define BTIF_SM_H
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+/* Generic Enter/Exit state machine events */
+#define BTIF_SM_ENTER_EVT 0xFFFF
+#define BTIF_SM_EXIT_EVT  0xFFFE
+
+
+/*****************************************************************************
+**  Type definitions and return values
+******************************************************************************/
+typedef UINT32 btif_sm_state_t;
+typedef UINT32 btif_sm_event_t;
+typedef void* btif_sm_handle_t;
+typedef BOOLEAN(*btif_sm_handler_t)(btif_sm_event_t event, void *data);
+
+
+/*****************************************************************************
+**  Functions
+**
+**  NOTE: THESE APIs SHOULD BE INVOKED ONLY IN THE BTIF CONTEXT
+**
+******************************************************************************/
+
+/*****************************************************************************
+**
+** Function     btif_sm_init
+**
+** Description  Initializes the state machine with the state handlers
+**              The caller should ensure that the table and the corresponding
+**              states match. The location that 'p_handlers' points to shall
+**              be available until the btif_sm_shutdown API is invoked.
+**
+** Returns      Returns a pointer to the initialized state machine handle.
+**
+******************************************************************************/
+btif_sm_handle_t btif_sm_init(const btif_sm_handler_t *p_handlers,
+                               btif_sm_state_t initial_state);
+
+/*****************************************************************************
+**
+** Function     btif_sm_shutdown
+**
+** Description  Tears down the state machine
+**
+** Returns      None
+**
+******************************************************************************/
+void btif_sm_shutdown(btif_sm_handle_t handle);
+
+/*****************************************************************************
+**
+** Function     btif_sm_get_state
+**
+** Description  Fetches the current state of the state machine
+**
+** Returns      Current state
+**
+******************************************************************************/
+btif_sm_state_t btif_sm_get_state(btif_sm_handle_t handle);
+
+/*****************************************************************************
+**
+** Function     btif_sm_dispatch
+**
+** Description  Dispatches the 'event' along with 'data' to the current state handler
+**
+** Returns      Returns BT_STATUS_OK on success, BT_STATUS_FAIL otherwise
+**
+******************************************************************************/
+bt_status_t btif_sm_dispatch(btif_sm_handle_t handle, btif_sm_event_t event,
+                                void *data);
+
+/*****************************************************************************
+**
+** Function     btif_sm_change_state
+**
+** Description  Make a transition to the new 'state'. The 'BTIF_SM_EXIT_EVT'
+**              shall be invoked before exiting the current state. The
+**              'BTIF_SM_ENTER_EVT' shall be invoked before entering the new state
+**
+**
+** Returns      Returns BT_STATUS_OK on success, BT_STATUS_FAIL otherwise
+**
+******************************************************************************/
+bt_status_t btif_sm_change_state(btif_sm_handle_t handle, btif_sm_state_t state);
+
+#endif /* BTIF_SM_H */
diff --git a/btif/include/btif_sock.h b/btif/include/btif_sock.h
new file mode 100644
index 0000000..ad2c71d
--- /dev/null
+++ b/btif/include/btif_sock.h
@@ -0,0 +1,36 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_sock.h
+ *
+ *  Description:   Bluetooth socket Interface
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_SOCK_H
+#define BTIF_SOCK_H
+
+#include <hardware/bt_sock.h>
+
+bt_status_t btif_sock_init();
+btsock_interface_t *btif_sock_get_interface();
+void btif_sock_cleanup();
+
+#endif
diff --git a/btif/include/btif_sock_rfc.h b/btif/include/btif_sock_rfc.h
new file mode 100644
index 0000000..b36ec1f
--- /dev/null
+++ b/btif/include/btif_sock_rfc.h
@@ -0,0 +1,38 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_sock.h
+ *
+ *  Description:   Bluetooth socket Interface
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_SOCK_RFC_H
+#define BTIF_SOCK_RFC_H
+
+bt_status_t btsock_rfc_init(int handle);
+bt_status_t btsock_rfc_cleanup();
+bt_status_t btsock_rfc_listen(const char* name, const uint8_t* uuid, int channel,
+                              int* sock_fd, int flags);
+bt_status_t btsock_rfc_connect(const bt_bdaddr_t *bd_addr, const uint8_t* uuid,
+                               int channel, int* sock_fd, int flags);
+void btsock_rfc_signaled(int fd, int flags, uint32_t user_id);
+
+#endif
diff --git a/btif/include/btif_sock_sdp.h b/btif/include/btif_sock_sdp.h
new file mode 100644
index 0000000..9fe4768
--- /dev/null
+++ b/btif/include/btif_sock_sdp.h
@@ -0,0 +1,39 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_SOCK_SDP_H
+#define BTIF_SOCK_SDP_H
+static const UINT8  UUID_OBEX_OBJECT_PUSH[] = {0x00, 0x00, 0x11, 0x05, 0x00, 0x00, 0x10, 0x00,
+                                               0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB};
+static const UINT8  UUID_PBAP_PSE[]         = {0x00, 0x00, 0x11, 0x2F, 0x00, 0x00, 0x10, 0x00,
+                                               0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB};
+static const UINT8  UUID_SPP[]              = {0x00, 0x00, 0x11, 0x01, 0x00, 0x00, 0x10, 0x00,
+                                               0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB};
+
+static inline BOOLEAN is_uuid_empty(const uint8_t* uuid)
+{
+   static  uint8_t empty_uuid[16];
+   return uuid == NULL || memcmp(uuid, empty_uuid, sizeof(empty_uuid)) == 0;
+}
+
+int add_rfc_sdp_rec(const char* name, const uint8_t* uuid, int scn);
+void del_rfc_sdp_rec(int handle);
+BOOLEAN is_reserved_rfc_channel(int channel);
+int get_reserved_rfc_channel(const uint8_t* uuid);
+
+#endif
diff --git a/btif/include/btif_sock_thread.h b/btif/include/btif_sock_thread.h
new file mode 100644
index 0000000..9b12f56
--- /dev/null
+++ b/btif/include/btif_sock_thread.h
@@ -0,0 +1,49 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_SOCK_THREAD_H
+#define BTIF_SOCK_THREAD_H
+
+#include <hardware/bt_sock.h>
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define SOCK_THREAD_FD_RD           1        /* BT socket read signal */
+#define SOCK_THREAD_FD_WR           (1 << 1) /* BT socket write signal */
+#define SOCK_THREAD_FD_EXCEPTION    (1 << 2) /* BT socket exception singal */
+#define SOCK_THREAD_ADD_FD_SYNC     (1 << 3) /* Add BT socket fd in current socket
+                                                poll thread context immediately */
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+typedef void (*btsock_signaled_cb)(int fd, int type, int flags, uint32_t user_id);
+typedef void (*btsock_cmd_cb)(int cmd_fd, int type, int size, uint32_t user_id);
+
+int btsock_thread_init();
+int btsock_thread_add_fd(int handle, int fd, int type, int flags, uint32_t user_id);
+int btsock_thread_wakeup(int handle);
+int btsock_thread_post_cmd(int handle, int cmd_type, const unsigned char* cmd_data,
+                           int data_size, uint32_t user_id);
+int btsock_thread_create(btsock_signaled_cb callback, btsock_cmd_cb cmd_callback);
+int btsock_thread_exit(int handle);
+
+#endif
diff --git a/btif/include/btif_sock_util.h b/btif/include/btif_sock_util.h
new file mode 100644
index 0000000..e0f7066
--- /dev/null
+++ b/btif/include/btif_sock_util.h
@@ -0,0 +1,65 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_sock_util.h
+ *
+ *  Description:   Bluetooth socket Interface Helper functions
+ *
+ *******************************************************************************/
+
+#ifndef BTIF_SOCK_UTIL_H
+#define BTIF_SOCK_UTIL_H
+
+#include <pthread.h>
+#include <cutils/log.h>
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+static inline void init_slot_lock( pthread_mutex_t* mutex)
+{
+    pthread_mutexattr_t attr;
+    pthread_mutexattr_init(&attr);
+    pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE_NP);
+    pthread_mutex_init(mutex, &attr);
+}
+
+static inline void lock_slot(pthread_mutex_t* mutex)
+{
+    if(mutex->value)
+        pthread_mutex_lock(mutex);
+    else ALOGE("mutex: %p is not initialized", mutex);
+}
+
+static inline void unlock_slot(pthread_mutex_t* mutex)
+{
+   if(mutex->value)
+        pthread_mutex_unlock(mutex);
+   else ALOGE("mutex: %p is not initialized", mutex);
+}
+
+void dump_bin(const char* title, const char* data, int size);
+
+int sock_send_fd(int sock_fd, const uint8_t* buffer, int len, int send_fd);
+int sock_send_all(int sock_fd, const uint8_t* buf, int len);
+int sock_recv_all(int sock_fd, uint8_t* buf, int len);
+
+#endif
diff --git a/btif/include/btif_storage.h b/btif/include/btif_storage.h
new file mode 100644
index 0000000..87dec3b
--- /dev/null
+++ b/btif/include/btif_storage.h
@@ -0,0 +1,313 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_STORAGE_H
+#define BTIF_STORAGE_H
+
+#include "data_types.h"
+#include "bt_types.h"
+
+#include <utils/Log.h>
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+#define BTIF_STORAGE_FILL_PROPERTY(p_prop, t, l, p_v) \
+         (p_prop)->type = t;(p_prop)->len = l; (p_prop)->val = (p_v);
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_storage_get_adapter_property
+**
+** Description      BTIF storage API - Fetches the adapter property->type
+**                  from NVRAM and fills property->val.
+**                  Caller should provide memory for property->val and
+**                  set the property->val
+**
+** Returns          BT_STATUS_SUCCESS if the fetch was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_get_adapter_property(bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_storage_set_adapter_property
+**
+** Description      BTIF storage API - Stores the adapter property
+**                  to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_set_adapter_property(bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_storage_get_remote_device_property
+**
+** Description      BTIF storage API - Fetches the remote device property->type
+**                  from NVRAM and fills property->val.
+**                  Caller should provide memory for property->val and
+**                  set the property->val
+**
+** Returns          BT_STATUS_SUCCESS if the fetch was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_get_remote_device_property(bt_bdaddr_t *remote_bd_addr,
+                                                    bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_storage_set_remote_device_property
+**
+** Description      BTIF storage API - Stores the remote device property
+**                  to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_set_remote_device_property(bt_bdaddr_t *remote_bd_addr,
+                                                    bt_property_t *property);
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_remote_device
+**
+** Description      BTIF storage API - Adds a newly discovered device to NVRAM
+**                  along with the timestamp. Also, stores the various
+**                  properties - RSSI, BDADDR, NAME (if found in EIR)
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_remote_device(bt_bdaddr_t *remote_bdaddr,
+                                           uint32_t num_properties,
+                                           bt_property_t *properties);
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_bonded_device
+**
+** Description      BTIF storage API - Adds the newly bonded device to NVRAM
+**                  along with the link-key, Key type and Pin key length
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_bonded_device(bt_bdaddr_t *remote_bd_addr,
+                                           LINK_KEY link_key,
+                                           uint8_t key_type,
+                                           uint8_t pin_length);
+
+/*******************************************************************************
+**
+** Function         btif_storage_remove_bonded_device
+**
+** Description      BTIF storage API - Deletes the bonded device from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the deletion was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_remove_bonded_device(bt_bdaddr_t *remote_bd_addr);
+
+/*******************************************************************************
+**
+** Function         btif_storage_remove_bonded_device
+**
+** Description      BTIF storage API - Deletes the bonded device from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the deletion was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_load_bonded_devices(void);
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_apps_cb
+**
+** Description      BTIF storage API - Read HL application control block from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_apps_cb(char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_apps_cb
+**
+** Description      BTIF storage API - Write HL application control block to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_apps_cb(char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_apps_cb
+**
+** Description      BTIF storage API - Read HL application configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_app_data(UINT8 app_idx, char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_app_data
+**
+** Description      BTIF storage API - Write HL application configuration to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_app_data(UINT8 app_idx, char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_mdl_data
+**
+** Description      BTIF storage API - Read HL application MDL configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_mdl_data(UINT8 app_idx, char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_mdl_data
+**
+** Description      BTIF storage API - Write HL application MDL configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_mdl_data(UINT8 app_idx, char *value, int value_size);
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_hid_device_info
+**
+** Description      BTIF storage API - Adds the hid information of bonded hid devices-to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_hid_device_info(bt_bdaddr_t *remote_bd_addr,
+                                                    UINT16 attr_mask, UINT8 sub_class,
+                                                    UINT8 app_id, UINT16 vendor_id,
+                                                    UINT16 product_id, UINT16 version,
+                                                    UINT8 ctry_code, UINT16 dl_len,
+                                                    UINT8 *dsc_list);
+
+/*******************************************************************************
+**
+** Function         btif_storage_load_bonded_hid_info
+**
+** Description      BTIF storage API - Loads hid info for all the bonded devices
+**                  from NVRAM and adds those devices  to the BTA_HH.
+**
+** Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_load_bonded_hid_info(void);
+
+/*******************************************************************************
+**
+** Function         btif_storage_remove_hid_info
+**
+** Description      BTIF storage API - Deletes the bonded hid device info from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the deletion was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_remove_hid_info(bt_bdaddr_t *remote_bd_addr);
+
+/*******************************************************************************
+**
+** Function         btif_storage_load_autopair_device_list
+**
+** Description      BTIF storage API - Populates auto pair device list
+**
+** Returns          BT_STATUS_SUCCESS if the auto pair blacklist is successfully populated
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_load_autopair_device_list();
+
+/*******************************************************************************
+**
+** Function         btif_storage_is_device_autopair_blacklisted
+**
+** Description      BTIF storage API  Checks if the given device is blacklisted for auto pairing
+**
+** Returns          TRUE if the device is found in the auto pair blacklist
+**                  FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN  btif_storage_is_device_autopair_blacklisted(bt_bdaddr_t *remote_dev_addr);
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_device_to_autopair_blacklist
+**
+** Description      BTIF storage API - Add a remote device to the auto pairing blacklist
+**
+** Returns          BT_STATUS_SUCCESS if the device is successfully added to the auto pair blacklist
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_device_to_autopair_blacklist(bt_bdaddr_t *remote_dev_addr);
+
+/*******************************************************************************
+**
+** Function         btif_storage_is_fixed_pin_zeros_keyboard
+**
+** Description      BTIF storage API - checks if this device has fixed PIN key device list
+**
+** Returns          TRUE   if the device is found in the fixed pin keyboard device list
+**                  FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN btif_storage_is_fixed_pin_zeros_keyboard(bt_bdaddr_t *remote_dev_addr);
+
+#endif /* BTIF_STORAGE_H */
diff --git a/btif/include/btif_util.h b/btif/include/btif_util.h
new file mode 100644
index 0000000..09dae6e
--- /dev/null
+++ b/btif/include/btif_util.h
@@ -0,0 +1,73 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BTIF_UTIL_H
+#define BTIF_UTIL_H
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hf.h>
+#include <utils/Log.h>
+
+#include "data_types.h"
+#include "bt_types.h"
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+#define CASE_RETURN_STR(const) case const: return #const;
+
+
+/*******************************************************************************
+**  Type definitions for callback functions
+********************************************************************************/
+
+typedef char bdstr_t[18];
+
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+const char* dump_bt_status(bt_status_t status);
+const char* dump_dm_search_event(UINT16 event);
+const char* dump_dm_event(UINT16 event);
+const char* dump_hf_event(UINT16 event);
+const char* dump_hh_event(UINT16 event);
+const char* dump_hf_conn_state(UINT16 event);
+const char* dump_hf_call_state(bthf_call_state_t call_state);
+const char* dump_property_type(bt_property_type_t type);
+const char* dump_hf_audio_state(UINT16 event);
+const char* dump_adapter_scan_mode(bt_scan_mode_t mode);
+const char* dump_thread_evt(bt_cb_thread_evt evt);
+
+const char* dump_av_conn_state(UINT16 event);
+const char* dump_av_audio_state(UINT16 event);
+
+int str2bd(char *str, bt_bdaddr_t *addr);
+char *bd2str(bt_bdaddr_t *addr, bdstr_t *bdstr);
+
+UINT32 devclass2uint(DEV_CLASS dev_class);
+void uint2devclass(UINT32 dev, DEV_CLASS dev_class);
+void uuid16_to_uuid128(uint16_t uuid16, bt_uuid_t* uuid128);
+
+void uuid_to_string(bt_uuid_t *p_uuid, char *str);
+void string_to_uuid(char *str, bt_uuid_t *p_uuid);
+int ascii_2_hex (char *p_ascii, int len, UINT8 *p_hex);
+
+#endif /* BTIF_UTIL_H */
diff --git a/btif/include/uinput.h b/btif/include/uinput.h
new file mode 100644
index 0000000..5925703
--- /dev/null
+++ b/btif/include/uinput.h
@@ -0,0 +1,590 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef __UINPUT_H
+#define __UINPUT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <sys/time.h>
+#include <sys/ioctl.h>
+
+/*******************************************************************************
+**  Constants & Macros
+********************************************************************************/
+
+/* Events */
+
+#define EV_SYN          0x00
+#define EV_KEY          0x01
+#define EV_REL          0x02
+#define EV_ABS          0x03
+#define EV_MSC          0x04
+#define EV_LED          0x11
+#define EV_SND          0x12
+#define EV_REP          0x14
+#define EV_FF           0x15
+#define EV_PWR          0x16
+#define EV_FF_STATUS        0x17
+#define EV_MAX          0x1f
+
+/* Synchronization events */
+
+#define SYN_REPORT      0
+#define SYN_CONFIG      1
+
+/* Keys and buttons */
+
+#define KEY_RESERVED        0
+#define KEY_ESC         1
+#define KEY_1           2
+#define KEY_2           3
+#define KEY_3           4
+#define KEY_4           5
+#define KEY_5           6
+#define KEY_6           7
+#define KEY_7           8
+#define KEY_8           9
+#define KEY_9           10
+#define KEY_0           11
+#define KEY_MINUS       12
+#define KEY_EQUAL       13
+#define KEY_BACKSPACE       14
+#define KEY_TAB         15
+#define KEY_Q           16
+#define KEY_W           17
+#define KEY_E           18
+#define KEY_R           19
+#define KEY_T           20
+#define KEY_Y           21
+#define KEY_U           22
+#define KEY_I           23
+#define KEY_O           24
+#define KEY_P           25
+#define KEY_LEFTBRACE       26
+#define KEY_RIGHTBRACE      27
+#define KEY_ENTER       28
+#define KEY_LEFTCTRL        29
+#define KEY_A           30
+#define KEY_S           31
+#define KEY_D           32
+#define KEY_F           33
+#define KEY_G           34
+#define KEY_H           35
+#define KEY_J           36
+#define KEY_K           37
+#define KEY_L           38
+#define KEY_SEMICOLON       39
+#define KEY_APOSTROPHE      40
+#define KEY_GRAVE       41
+#define KEY_LEFTSHIFT       42
+#define KEY_BACKSLASH       43
+#define KEY_Z           44
+#define KEY_X           45
+#define KEY_C           46
+#define KEY_V           47
+#define KEY_B           48
+#define KEY_N           49
+#define KEY_M           50
+#define KEY_COMMA       51
+#define KEY_DOT         52
+#define KEY_SLASH       53
+#define KEY_RIGHTSHIFT      54
+#define KEY_KPASTERISK      55
+#define KEY_LEFTALT     56
+#define KEY_SPACE       57
+#define KEY_CAPSLOCK        58
+#define KEY_F1          59
+#define KEY_F2          60
+#define KEY_F3          61
+#define KEY_F4          62
+#define KEY_F5          63
+#define KEY_F6          64
+#define KEY_F7          65
+#define KEY_F8          66
+#define KEY_F9          67
+#define KEY_F10         68
+#define KEY_NUMLOCK     69
+#define KEY_SCROLLLOCK      70
+#define KEY_KP7         71
+#define KEY_KP8         72
+#define KEY_KP9         73
+#define KEY_KPMINUS     74
+#define KEY_KP4         75
+#define KEY_KP5         76
+#define KEY_KP6         77
+#define KEY_KPPLUS      78
+#define KEY_KP1         79
+#define KEY_KP2         80
+#define KEY_KP3         81
+#define KEY_KP0         82
+#define KEY_KPDOT       83
+#define KEY_103RD       84
+#define KEY_F13         85
+#define KEY_102ND       86
+#define KEY_F11         87
+#define KEY_F12         88
+#define KEY_F14         89
+#define KEY_F15         90
+#define KEY_F16         91
+#define KEY_F17         92
+#define KEY_F18         93
+#define KEY_F19         94
+#define KEY_F20         95
+#define KEY_KPENTER     96
+#define KEY_RIGHTCTRL       97
+#define KEY_KPSLASH     98
+#define KEY_SYSRQ       99
+#define KEY_RIGHTALT        100
+#define KEY_LINEFEED        101
+#define KEY_HOME        102
+#define KEY_UP          103
+#define KEY_PAGEUP      104
+#define KEY_LEFT        105
+#define KEY_RIGHT       106
+#define KEY_END         107
+#define KEY_DOWN        108
+#define KEY_PAGEDOWN        109
+#define KEY_INSERT      110
+#define KEY_DELETE      111
+#define KEY_MACRO       112
+#define KEY_MUTE        113
+#define KEY_VOLUMEDOWN      114
+#define KEY_VOLUMEUP        115
+#define KEY_POWER       116
+#define KEY_KPEQUAL     117
+#define KEY_KPPLUSMINUS     118
+#define KEY_PAUSE       119
+#define KEY_F21         120
+#define KEY_F22         121
+#define KEY_F23         122
+#define KEY_F24         123
+#define KEY_KPCOMMA     124
+#define KEY_LEFTMETA        125
+#define KEY_RIGHTMETA       126
+#define KEY_COMPOSE     127
+
+#define KEY_STOP        128
+#define KEY_AGAIN       129
+#define KEY_PROPS       130
+#define KEY_UNDO        131
+#define KEY_FRONT       132
+#define KEY_COPY        133
+#define KEY_OPEN        134
+#define KEY_PASTE       135
+#define KEY_FIND        136
+#define KEY_CUT         137
+#define KEY_HELP        138
+#define KEY_MENU        139
+#define KEY_CALC        140
+#define KEY_SETUP       141
+#define KEY_SLEEP       142
+#define KEY_WAKEUP      143
+#define KEY_FILE        144
+#define KEY_SENDFILE        145
+#define KEY_DELETEFILE      146
+#define KEY_XFER        147
+#define KEY_PROG1       148
+#define KEY_PROG2       149
+#define KEY_WWW         150
+#define KEY_MSDOS       151
+#define KEY_COFFEE      152
+#define KEY_DIRECTION       153
+#define KEY_CYCLEWINDOWS    154
+#define KEY_MAIL        155
+#define KEY_BOOKMARKS       156
+#define KEY_COMPUTER        157
+#define KEY_BACK        158
+#define KEY_FORWARD     159
+#define KEY_CLOSECD     160
+#define KEY_EJECTCD     161
+#define KEY_EJECTCLOSECD    162
+#define KEY_NEXTSONG        163
+#define KEY_PLAYPAUSE       164
+#define KEY_PREVIOUSSONG    165
+#define KEY_STOPCD      166
+#define KEY_RECORD      167
+#define KEY_REWIND      168
+#define KEY_PHONE       169
+#define KEY_ISO         170
+#define KEY_CONFIG      171
+#define KEY_HOMEPAGE        172
+#define KEY_REFRESH     173
+#define KEY_EXIT        174
+#define KEY_MOVE        175
+#define KEY_EDIT        176
+#define KEY_SCROLLUP        177
+#define KEY_SCROLLDOWN      178
+#define KEY_KPLEFTPAREN     179
+#define KEY_KPRIGHTPAREN    180
+
+#define KEY_INTL1       181
+#define KEY_INTL2       182
+#define KEY_INTL3       183
+#define KEY_INTL4       184
+#define KEY_INTL5       185
+#define KEY_INTL6       186
+#define KEY_INTL7       187
+#define KEY_INTL8       188
+#define KEY_INTL9       189
+#define KEY_LANG1       190
+#define KEY_LANG2       191
+#define KEY_LANG3       192
+#define KEY_LANG4       193
+#define KEY_LANG5       194
+#define KEY_LANG6       195
+#define KEY_LANG7       196
+#define KEY_LANG8       197
+#define KEY_LANG9       198
+
+#define KEY_PLAYCD      200
+#define KEY_PAUSECD     201
+#define KEY_PROG3       202
+#define KEY_PROG4       203
+#define KEY_SUSPEND     205
+#define KEY_CLOSE       206
+#define KEY_PLAY        207
+
+#define KEY_UNKNOWN     220
+
+#define KEY_BRIGHTNESSDOWN  224
+#define KEY_BRIGHTNESSUP    225
+
+#define BTN_MISC        0x100
+#define BTN_0           0x100
+#define BTN_1           0x101
+#define BTN_2           0x102
+#define BTN_3           0x103
+#define BTN_4           0x104
+#define BTN_5           0x105
+#define BTN_6           0x106
+#define BTN_7           0x107
+#define BTN_8           0x108
+#define BTN_9           0x109
+
+#define BTN_MOUSE       0x110
+#define BTN_LEFT        0x110
+#define BTN_RIGHT       0x111
+#define BTN_MIDDLE      0x112
+#define BTN_SIDE        0x113
+#define BTN_EXTRA       0x114
+#define BTN_FORWARD     0x115
+#define BTN_BACK        0x116
+#define BTN_TASK        0x117
+
+#define BTN_JOYSTICK        0x120
+#define BTN_TRIGGER     0x120
+#define BTN_THUMB       0x121
+#define BTN_THUMB2      0x122
+#define BTN_TOP         0x123
+#define BTN_TOP2        0x124
+#define BTN_PINKIE      0x125
+#define BTN_BASE        0x126
+#define BTN_BASE2       0x127
+#define BTN_BASE3       0x128
+#define BTN_BASE4       0x129
+#define BTN_BASE5       0x12a
+#define BTN_BASE6       0x12b
+#define BTN_DEAD        0x12f
+
+#define BTN_GAMEPAD     0x130
+#define BTN_A           0x130
+#define BTN_B           0x131
+#define BTN_C           0x132
+#define BTN_X           0x133
+#define BTN_Y           0x134
+#define BTN_Z           0x135
+#define BTN_TL          0x136
+#define BTN_TR          0x137
+#define BTN_TL2         0x138
+#define BTN_TR2         0x139
+#define BTN_SELECT      0x13a
+#define BTN_START       0x13b
+#define BTN_MODE        0x13c
+#define BTN_THUMBL      0x13d
+#define BTN_THUMBR      0x13e
+
+#define BTN_DIGI        0x140
+#define BTN_TOOL_PEN        0x140
+#define BTN_TOOL_RUBBER     0x141
+#define BTN_TOOL_BRUSH      0x142
+#define BTN_TOOL_PENCIL     0x143
+#define BTN_TOOL_AIRBRUSH   0x144
+#define BTN_TOOL_FINGER     0x145
+#define BTN_TOOL_MOUSE      0x146
+#define BTN_TOOL_LENS       0x147
+#define BTN_TOUCH       0x14a
+#define BTN_STYLUS      0x14b
+#define BTN_STYLUS2     0x14c
+#define BTN_TOOL_DOUBLETAP  0x14d
+#define BTN_TOOL_TRIPLETAP  0x14e
+
+#define BTN_WHEEL       0x150
+#define BTN_GEAR_DOWN       0x150
+#define BTN_GEAR_UP     0x151
+
+#define KEY_OK          0x160
+#define KEY_SELECT      0x161
+#define KEY_GOTO        0x162
+#define KEY_CLEAR       0x163
+#define KEY_POWER2      0x164
+#define KEY_OPTION      0x165
+#define KEY_INFO        0x166
+#define KEY_TIME        0x167
+#define KEY_VENDOR      0x168
+#define KEY_ARCHIVE     0x169
+#define KEY_PROGRAM     0x16a
+#define KEY_CHANNEL     0x16b
+#define KEY_FAVORITES       0x16c
+#define KEY_EPG         0x16d
+#define KEY_PVR         0x16e
+#define KEY_MHP         0x16f
+#define KEY_LANGUAGE        0x170
+#define KEY_TITLE       0x171
+#define KEY_SUBTITLE        0x172
+#define KEY_ANGLE       0x173
+#define KEY_ZOOM        0x174
+#define KEY_MODE        0x175
+#define KEY_KEYBOARD        0x176
+#define KEY_SCREEN      0x177
+#define KEY_PC          0x178
+#define KEY_TV          0x179
+#define KEY_TV2         0x17a
+#define KEY_VCR         0x17b
+#define KEY_VCR2        0x17c
+#define KEY_SAT         0x17d
+#define KEY_SAT2        0x17e
+#define KEY_CD          0x17f
+#define KEY_TAPE        0x180
+#define KEY_RADIO       0x181
+#define KEY_TUNER       0x182
+#define KEY_PLAYER      0x183
+#define KEY_TEXT        0x184
+#define KEY_DVD         0x185
+#define KEY_AUX         0x186
+#define KEY_MP3         0x187
+#define KEY_AUDIO       0x188
+#define KEY_VIDEO       0x189
+#define KEY_DIRECTORY       0x18a
+#define KEY_LIST        0x18b
+#define KEY_MEMO        0x18c
+#define KEY_CALENDAR        0x18d
+#define KEY_RED         0x18e
+#define KEY_GREEN       0x18f
+#define KEY_YELLOW      0x190
+#define KEY_BLUE        0x191
+#define KEY_CHANNELUP       0x192
+#define KEY_CHANNELDOWN     0x193
+#define KEY_FIRST       0x194
+#define KEY_LAST        0x195
+#define KEY_AB          0x196
+#define KEY_NEXT        0x197
+#define KEY_RESTART     0x198
+#define KEY_SLOW        0x199
+#define KEY_SHUFFLE     0x19a
+#define KEY_BREAK       0x19b
+#define KEY_PREVIOUS        0x19c
+#define KEY_DIGITS      0x19d
+#define KEY_TEEN        0x19e
+#define KEY_TWEN        0x19f
+
+#define KEY_FRAMEBACK       0x1b2
+#define KEY_FRAMEFORWARD    0x1b3
+#define KEY_CONTEXT_MENU    0x1fb
+
+#define KEY_MAX         0x1ff
+
+/* Relative axes */
+
+#define REL_X           0x00
+#define REL_Y           0x01
+#define REL_Z           0x02
+#define REL_RX          0x03
+#define REL_RY          0x04
+#define REL_RZ          0x05
+#define REL_HWHEEL      0x06
+#define REL_DIAL        0x07
+#define REL_WHEEL       0x08
+#define REL_MISC        0x09
+#define REL_MAX         0x0f
+
+/* Absolute axes */
+
+#define ABS_X           0x00
+#define ABS_Y           0x01
+#define ABS_Z           0x02
+#define ABS_RX          0x03
+#define ABS_RY          0x04
+#define ABS_RZ          0x05
+#define ABS_THROTTLE        0x06
+#define ABS_RUDDER      0x07
+#define ABS_WHEEL       0x08
+#define ABS_GAS         0x09
+#define ABS_BRAKE       0x0a
+#define ABS_HAT0X       0x10
+#define ABS_HAT0Y       0x11
+#define ABS_HAT1X       0x12
+#define ABS_HAT1Y       0x13
+#define ABS_HAT2X       0x14
+#define ABS_HAT2Y       0x15
+#define ABS_HAT3X       0x16
+#define ABS_HAT3Y       0x17
+#define ABS_PRESSURE        0x18
+#define ABS_DISTANCE        0x19
+#define ABS_TILT_X      0x1a
+#define ABS_TILT_Y      0x1b
+#define ABS_TOOL_WIDTH      0x1c
+#define ABS_VOLUME      0x20
+#define ABS_MISC        0x28
+#define ABS_MAX         0x3f
+
+/* Switch events */
+
+#define SW_0            0x00
+#define SW_1            0x01
+#define SW_2            0x02
+#define SW_3            0x03
+#define SW_4            0x04
+#define SW_5            0x05
+#define SW_6            0x06
+#define SW_7            0x07
+#define SW_MAX          0x0f
+
+/* Misc events */
+
+#define MSC_SERIAL      0x00
+#define MSC_PULSELED        0x01
+#define MSC_GESTURE     0x02
+#define MSC_RAW         0x03
+#define MSC_SCAN        0x04
+#define MSC_MAX         0x07
+
+/* LEDs */
+
+#define LED_NUML        0x00
+#define LED_CAPSL       0x01
+#define LED_SCROLLL     0x02
+#define LED_COMPOSE     0x03
+#define LED_KANA        0x04
+#define LED_SLEEP       0x05
+#define LED_SUSPEND     0x06
+#define LED_MUTE        0x07
+#define LED_MISC        0x08
+#define LED_MAIL        0x09
+#define LED_CHARGING        0x0a
+#define LED_MAX         0x0f
+
+/* Autorepeat values */
+
+#define REP_DELAY       0x00
+#define REP_PERIOD      0x01
+#define REP_MAX         0x01
+
+/* Sounds */
+
+#define SND_CLICK       0x00
+#define SND_BELL        0x01
+#define SND_TONE        0x02
+#define SND_MAX         0x07
+
+/* Identifiers */
+
+#define ID_BUS          0
+#define ID_VENDOR       1
+#define ID_PRODUCT      2
+#define ID_VERSION      3
+
+#define BUS_PCI         0x01
+#define BUS_ISAPNP      0x02
+#define BUS_USB         0x03
+#define BUS_HIL         0x04
+#define BUS_BLUETOOTH       0x05
+
+#define BUS_ISA         0x10
+#define BUS_I8042       0x11
+#define BUS_XTKBD       0x12
+#define BUS_RS232       0x13
+#define BUS_GAMEPORT        0x14
+#define BUS_PARPORT     0x15
+#define BUS_AMIGA       0x16
+#define BUS_ADB         0x17
+#define BUS_I2C         0x18
+#define BUS_HOST        0x19
+#define BUS_GSC         0x1A
+
+/* User input interface */
+
+#define UINPUT_IOCTL_BASE   'U'
+
+#define UI_DEV_CREATE       _IO(UINPUT_IOCTL_BASE, 1)
+#define UI_DEV_DESTROY      _IO(UINPUT_IOCTL_BASE, 2)
+
+#define UI_SET_EVBIT        _IOW(UINPUT_IOCTL_BASE, 100, int)
+#define UI_SET_KEYBIT       _IOW(UINPUT_IOCTL_BASE, 101, int)
+#define UI_SET_RELBIT       _IOW(UINPUT_IOCTL_BASE, 102, int)
+#define UI_SET_ABSBIT       _IOW(UINPUT_IOCTL_BASE, 103, int)
+#define UI_SET_MSCBIT       _IOW(UINPUT_IOCTL_BASE, 104, int)
+#define UI_SET_LEDBIT       _IOW(UINPUT_IOCTL_BASE, 105, int)
+#define UI_SET_SNDBIT       _IOW(UINPUT_IOCTL_BASE, 106, int)
+#define UI_SET_FFBIT        _IOW(UINPUT_IOCTL_BASE, 107, int)
+#define UI_SET_PHYS     _IOW(UINPUT_IOCTL_BASE, 108, char*)
+#define UI_SET_SWBIT        _IOW(UINPUT_IOCTL_BASE, 109, int)
+
+#ifndef NBITS
+#define NBITS(x) ((((x) - 1) / (sizeof(long) * 8)) + 1)
+#endif
+
+#define UINPUT_MAX_NAME_SIZE    80
+
+
+/*******************************************************************************
+**  Type definitions and return values
+********************************************************************************/
+
+struct uinput_id {
+    uint16_t bustype;
+    uint16_t vendor;
+    uint16_t product;
+    uint16_t version;
+};
+
+struct uinput_dev {
+    char name[UINPUT_MAX_NAME_SIZE];
+    struct uinput_id id;
+    int ff_effects_max;
+    int absmax[ABS_MAX + 1];
+    int absmin[ABS_MAX + 1];
+    int absfuzz[ABS_MAX + 1];
+    int absflat[ABS_MAX + 1];
+};
+
+struct uinput_event {
+    struct timeval time;
+    uint16_t type;
+    uint16_t code;
+    int32_t value;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __UINPUT_H */
diff --git a/btif/src/bluetooth.c b/btif/src/bluetooth.c
new file mode 100644
index 0000000..20d6a07
--- /dev/null
+++ b/btif/src/bluetooth.c
@@ -0,0 +1,413 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      bluetooth.c
+ *
+ *  Description:   Bluetooth HAL implementation
+ *
+ ***********************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hf.h>
+#include <hardware/bt_av.h>
+#include <hardware/bt_sock.h>
+#include <hardware/bt_hh.h>
+#include <hardware/bt_hl.h>
+#include <hardware/bt_pan.h>
+
+#define LOG_NDDEBUG 0
+#define LOG_TAG "bluedroid"
+
+#include "btif_api.h"
+#include "bt_utils.h"
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+
+#define is_profile(profile, str) ((strlen(str) == strlen(profile)) && strncmp((const char *)profile, str, strlen(str)) == 0)
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+
+bt_callbacks_t *bt_hal_cbacks = NULL;
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+
+/* list all extended interfaces here */
+
+/* handsfree profile */
+extern bthf_interface_t *btif_hf_get_interface();
+/* advanced audio profile */
+extern btav_interface_t *btif_av_get_interface();
+/*rfc l2cap*/
+extern btsock_interface_t *btif_sock_get_interface();
+/* hid host profile */
+extern bthh_interface_t *btif_hh_get_interface();
+/* health device profile */
+extern bthl_interface_t *btif_hl_get_interface();
+/*pan*/
+extern btpan_interface_t *btif_pan_get_interface();
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+static uint8_t interface_ready(void)
+{
+    /* add checks here that would prevent API calls other than init to be executed */
+    if (bt_hal_cbacks == NULL)
+        return FALSE;
+
+    return TRUE;
+}
+
+
+/*****************************************************************************
+**
+**   BLUETOOTH HAL INTERFACE FUNCTIONS
+**
+*****************************************************************************/
+
+static int init(bt_callbacks_t* callbacks )
+{
+    ALOGI("init");
+
+    /* sanity check */
+    if (interface_ready() == TRUE)
+        return BT_STATUS_DONE;
+
+    /* store reference to user callbacks */
+    bt_hal_cbacks = callbacks;
+
+    /* add checks for individual callbacks ? */
+
+    bt_utils_init();
+
+    /* init btif */
+    btif_init_bluetooth();
+
+    return BT_STATUS_SUCCESS;
+}
+
+static int enable( void )
+{
+    ALOGI("enable");
+
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_enable_bluetooth();
+}
+
+static int disable(void)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_disable_bluetooth();
+}
+
+static void cleanup( void )
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return;
+
+    btif_shutdown_bluetooth();
+    bt_utils_cleanup();
+
+    /* hal callbacks reset upon shutdown complete callback */
+
+    return;
+}
+
+static int get_adapter_properties(void)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_get_adapter_properties();
+}
+
+static int get_adapter_property(bt_property_type_t type)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_get_adapter_property(type);
+}
+
+static int set_adapter_property(const bt_property_t *property)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_set_adapter_property(property);
+}
+
+int get_remote_device_properties(bt_bdaddr_t *remote_addr)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_get_remote_device_properties(remote_addr);
+}
+
+int get_remote_device_property(bt_bdaddr_t *remote_addr, bt_property_type_t type)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_get_remote_device_property(remote_addr, type);
+}
+
+int set_remote_device_property(bt_bdaddr_t *remote_addr, const bt_property_t *property)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_set_remote_device_property(remote_addr, property);
+}
+
+int get_remote_service_record(bt_bdaddr_t *remote_addr, bt_uuid_t *uuid)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_get_remote_service_record(remote_addr, uuid);
+}
+
+int get_remote_services(bt_bdaddr_t *remote_addr)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_get_remote_services(remote_addr);
+}
+
+static int start_discovery(void)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_start_discovery();
+}
+
+static int cancel_discovery(void)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_cancel_discovery();
+}
+
+static int create_bond(const bt_bdaddr_t *bd_addr)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_create_bond(bd_addr);
+}
+
+static int cancel_bond(const bt_bdaddr_t *bd_addr)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_cancel_bond(bd_addr);
+}
+
+static int remove_bond(const bt_bdaddr_t *bd_addr)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_remove_bond(bd_addr);
+}
+
+static int pin_reply(const bt_bdaddr_t *bd_addr, uint8_t accept,
+                 uint8_t pin_len, bt_pin_code_t *pin_code)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_pin_reply(bd_addr, accept, pin_len, pin_code);
+}
+
+static int ssp_reply(const bt_bdaddr_t *bd_addr, bt_ssp_variant_t variant,
+                       uint8_t accept, uint32_t passkey)
+{
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_ssp_reply(bd_addr, variant, accept, passkey);
+}
+
+static const void* get_profile_interface (const char *profile_id)
+{
+    ALOGI("get_profile_interface %s", profile_id);
+
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return NULL;
+
+    /* check for supported profile interfaces */
+    if (is_profile(profile_id, BT_PROFILE_HANDSFREE_ID))
+        return btif_hf_get_interface();
+
+    if (is_profile(profile_id, BT_PROFILE_SOCKETS_ID))
+        return btif_sock_get_interface();
+
+    if (is_profile(profile_id, BT_PROFILE_PAN_ID))
+        return btif_pan_get_interface();
+
+    if (is_profile(profile_id, BT_PROFILE_ADVANCED_AUDIO_ID))
+        return btif_av_get_interface();
+
+    if (is_profile(profile_id, BT_PROFILE_HIDHOST_ID))
+        return btif_hh_get_interface();
+
+    if (is_profile(profile_id, BT_PROFILE_HEALTH_ID))
+        return btif_hl_get_interface();
+    return NULL;
+}
+
+int dut_mode_configure(uint8_t enable)
+{
+    ALOGI("dut_mode_configure");
+
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dut_mode_configure(enable);
+}
+
+int dut_mode_send(uint16_t opcode, uint8_t* buf, uint8_t len)
+{
+    ALOGI("dut_mode_send");
+
+    /* sanity check */
+    if (interface_ready() == FALSE)
+        return BT_STATUS_NOT_READY;
+
+    return btif_dut_mode_send(opcode, buf, len);
+}
+static const bt_interface_t bluetoothInterface = {
+    sizeof(bt_interface_t),
+    init,
+    enable,
+    disable,
+    cleanup,
+    get_adapter_properties,
+    get_adapter_property,
+    set_adapter_property,
+    get_remote_device_properties,
+    get_remote_device_property,
+    set_remote_device_property,
+    get_remote_service_record,
+    get_remote_services,
+    start_discovery,
+    cancel_discovery,
+    create_bond,
+    remove_bond,
+    cancel_bond,
+    pin_reply,
+    ssp_reply,
+    get_profile_interface,
+    dut_mode_configure,
+    dut_mode_send
+};
+
+const bt_interface_t* bluetooth__get_bluetooth_interface ()
+{
+    /* fixme -- add property to disable bt interface ? */
+
+    return &bluetoothInterface;
+}
+
+static int close_bluetooth_stack(struct hw_device_t* device)
+{
+    cleanup();
+    return 0;
+}
+
+static int open_bluetooth_stack (const struct hw_module_t* module, char const* name,
+struct hw_device_t** abstraction)
+{
+    bluetooth_device_t *stack = malloc(sizeof(bluetooth_device_t) );
+    memset(stack, 0, sizeof(bluetooth_device_t) );
+    stack->common.tag = HARDWARE_DEVICE_TAG;
+    stack->common.version = 0;
+    stack->common.module = (struct hw_module_t*)module;
+    stack->common.close = close_bluetooth_stack;
+    stack->get_bluetooth_interface = bluetooth__get_bluetooth_interface;
+    *abstraction = (struct hw_device_t*)stack;
+    return 0;
+}
+
+
+static struct hw_module_methods_t bt_stack_module_methods = {
+    .open = open_bluetooth_stack,
+};
+
+struct hw_module_t HAL_MODULE_INFO_SYM = {
+    .tag = HARDWARE_MODULE_TAG,
+    .version_major = 1,
+    .version_minor = 0,
+    .id = BT_HARDWARE_MODULE_ID,
+    .name = "Bluetooth Stack",
+    .author = "The Android Open Source Project",
+    .methods = &bt_stack_module_methods
+};
+
diff --git a/btif/src/btif_av.c b/btif/src/btif_av.c
new file mode 100755
index 0000000..4419c22
--- /dev/null
+++ b/btif/src/btif_av.c
@@ -0,0 +1,970 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+/*****************************************************************************
+ *
+ *  Filename:      btif_av.c
+ *
+ *  Description:   Bluedroid AV implementation
+ *
+ *****************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include "hardware/bt_av.h"
+
+#define LOG_TAG "BTIF_AV"
+
+#include "btif_av.h"
+#include "btif_util.h"
+#include "btif_profile_queue.h"
+#include "bta_api.h"
+#include "btif_media.h"
+#include "bta_av_api.h"
+#include "gki.h"
+#include "bd.h"
+#include "btu.h"
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+#define BTIF_AV_SERVICE_NAME "Advanced Audio"
+
+#define BTIF_TIMEOUT_AV_OPEN_ON_RC_SECS  2
+
+typedef enum {
+    BTIF_AV_STATE_IDLE = 0x0,
+    BTIF_AV_STATE_OPENING,
+    BTIF_AV_STATE_OPENED,
+    BTIF_AV_STATE_STARTED,
+    BTIF_AV_STATE_CLOSING
+} btif_av_state_t;
+
+/* Should not need dedicated suspend state as actual actions are no
+   different than open state. Suspend flags are needed however to prevent
+   media task from trying to restart stream during remote suspend or while
+   we are in the process of a local suspend */
+
+#define BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING 0x1
+#define BTIF_AV_FLAG_REMOTE_SUSPEND        0x2
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+typedef struct
+{
+    tBTA_AV_HNDL bta_handle;
+    bt_bdaddr_t peer_bda;
+    btif_sm_handle_t sm_handle;
+    UINT8 flags;
+} btif_av_cb_t;
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+static btav_callbacks_t *bt_av_callbacks = NULL;
+static btif_av_cb_t btif_av_cb;
+static TIMER_LIST_ENT tle_av_open_on_rc;
+
+/* both interface and media task needs to be ready to alloc incoming request */
+#define CHECK_BTAV_INIT() if ((bt_av_callbacks == NULL) || (btif_av_cb.sm_handle == NULL))\
+{\
+     BTIF_TRACE_WARNING1("%s: BTAV not initialized", __FUNCTION__);\
+     return BT_STATUS_NOT_READY;\
+}\
+else\
+{\
+     BTIF_TRACE_EVENT1("%s", __FUNCTION__);\
+}
+
+/* Helper macro to avoid code duplication in the state machine handlers */
+#define CHECK_RC_EVENT(e, d) \
+    case BTA_AV_RC_OPEN_EVT: \
+    case BTA_AV_RC_CLOSE_EVT: \
+    case BTA_AV_REMOTE_CMD_EVT: \
+    case BTA_AV_VENDOR_CMD_EVT: \
+    case BTA_AV_META_MSG_EVT: \
+    case BTA_AV_RC_FEAT_EVT: \
+    { \
+         btif_rc_handler(e, d);\
+    }break; \
+
+static BOOLEAN btif_av_state_idle_handler(btif_sm_event_t event, void *data);
+static BOOLEAN btif_av_state_opening_handler(btif_sm_event_t event, void *data);
+static BOOLEAN btif_av_state_opened_handler(btif_sm_event_t event, void *data);
+static BOOLEAN btif_av_state_started_handler(btif_sm_event_t event, void *data);
+static BOOLEAN btif_av_state_closing_handler(btif_sm_event_t event, void *data);
+
+static const btif_sm_handler_t btif_av_state_handlers[] =
+{
+    btif_av_state_idle_handler,
+    btif_av_state_opening_handler,
+    btif_av_state_opened_handler,
+    btif_av_state_started_handler,
+    btif_av_state_closing_handler
+};
+
+/*************************************************************************
+** Extern functions
+*************************************************************************/
+extern void btif_rc_init(void);
+extern void btif_rc_handler(tBTA_AV_EVT event, tBTA_AV *p_data);
+extern BOOLEAN btif_rc_get_connected_peer(BD_ADDR peer_addr);
+extern void btif_rc_check_handle_pending_play (BD_ADDR peer_addr, BOOLEAN bSendToApp);
+
+/*****************************************************************************
+** Local helper functions
+******************************************************************************/
+
+const char *dump_av_sm_state_name(btif_av_state_t state)
+{
+    switch (state)
+    {
+        CASE_RETURN_STR(BTIF_AV_STATE_IDLE)
+        CASE_RETURN_STR(BTIF_AV_STATE_OPENING)
+        CASE_RETURN_STR(BTIF_AV_STATE_OPENED)
+        CASE_RETURN_STR(BTIF_AV_STATE_STARTED)
+        CASE_RETURN_STR(BTIF_AV_STATE_CLOSING)
+        default: return "UNKNOWN_STATE";
+    }
+}
+
+const char *dump_av_sm_event_name(btif_av_sm_event_t event)
+{
+    switch((int)event)
+    {
+        CASE_RETURN_STR(BTA_AV_ENABLE_EVT)
+        CASE_RETURN_STR(BTA_AV_REGISTER_EVT)
+        CASE_RETURN_STR(BTA_AV_OPEN_EVT)
+        CASE_RETURN_STR(BTA_AV_CLOSE_EVT)
+        CASE_RETURN_STR(BTA_AV_START_EVT)
+        CASE_RETURN_STR(BTA_AV_STOP_EVT)
+        CASE_RETURN_STR(BTA_AV_PROTECT_REQ_EVT)
+        CASE_RETURN_STR(BTA_AV_PROTECT_RSP_EVT)
+        CASE_RETURN_STR(BTA_AV_RC_OPEN_EVT)
+        CASE_RETURN_STR(BTA_AV_RC_CLOSE_EVT)
+        CASE_RETURN_STR(BTA_AV_REMOTE_CMD_EVT)
+        CASE_RETURN_STR(BTA_AV_REMOTE_RSP_EVT)
+        CASE_RETURN_STR(BTA_AV_VENDOR_CMD_EVT)
+        CASE_RETURN_STR(BTA_AV_VENDOR_RSP_EVT)
+        CASE_RETURN_STR(BTA_AV_RECONFIG_EVT)
+        CASE_RETURN_STR(BTA_AV_SUSPEND_EVT)
+        CASE_RETURN_STR(BTA_AV_PENDING_EVT)
+        CASE_RETURN_STR(BTA_AV_META_MSG_EVT)
+        CASE_RETURN_STR(BTA_AV_REJECT_EVT)
+        CASE_RETURN_STR(BTA_AV_RC_FEAT_EVT)
+        CASE_RETURN_STR(BTIF_SM_ENTER_EVT)
+        CASE_RETURN_STR(BTIF_SM_EXIT_EVT)
+        CASE_RETURN_STR(BTIF_AV_CONNECT_REQ_EVT)
+        CASE_RETURN_STR(BTIF_AV_DISCONNECT_REQ_EVT)
+        CASE_RETURN_STR(BTIF_AV_START_STREAM_REQ_EVT)
+        CASE_RETURN_STR(BTIF_AV_STOP_STREAM_REQ_EVT)
+        CASE_RETURN_STR(BTIF_AV_SUSPEND_STREAM_REQ_EVT)
+        CASE_RETURN_STR(BTIF_AV_RECONFIGURE_REQ_EVT)
+
+        default: return "UNKNOWN_EVENT";
+   }
+}
+
+/****************************************************************************
+**  Local helper functions
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         btif_initiate_av_open_tmr_hdlr
+**
+** Description      Timer to trigger AV open if the remote headset establishes
+**                  RC connection w/o AV connection. The timer is needed to IOP
+**                  with headsets that do establish AV after RC connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_initiate_av_open_tmr_hdlr(TIMER_LIST_ENT *tle)
+{
+    BD_ADDR peer_addr;
+
+    /* is there at least one RC connection - There should be */
+    if (btif_rc_get_connected_peer(peer_addr)) {
+       BTIF_TRACE_DEBUG1("%s Issuing connect to the remote RC peer", __FUNCTION__);
+       btif_sm_dispatch(btif_av_cb.sm_handle, BTIF_AV_CONNECT_REQ_EVT, (void*)&peer_addr);
+    }
+    else
+    {
+        BTIF_TRACE_ERROR1("%s No connected RC peers", __FUNCTION__);
+    }
+}
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**
+** Function		btif_av_state_idle_handler
+**
+** Description  State managing disconnected AV link
+**
+** Returns      TRUE if event was processed, FALSE otherwise
+**
+*******************************************************************************/
+
+static BOOLEAN btif_av_state_idle_handler(btif_sm_event_t event, void *p_data)
+{
+    BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
+                     dump_av_sm_event_name(event), btif_av_cb.flags);
+
+    switch (event)
+    {
+        case BTIF_SM_ENTER_EVT:
+            /* clear the peer_bda */
+            memset(&btif_av_cb.peer_bda, 0, sizeof(bt_bdaddr_t));
+            btif_av_cb.flags = 0;
+            btif_a2dp_on_idle();
+            break;
+
+        case BTIF_SM_EXIT_EVT:
+            break;
+
+        case BTA_AV_ENABLE_EVT:
+            break;
+
+        case BTA_AV_REGISTER_EVT:
+            btif_av_cb.bta_handle = ((tBTA_AV*)p_data)->registr.hndl;
+            break;
+
+        case BTA_AV_PENDING_EVT:
+        case BTIF_AV_CONNECT_REQ_EVT:
+        {
+             if (event == BTIF_AV_CONNECT_REQ_EVT)
+             {
+                 memcpy(&btif_av_cb.peer_bda, (bt_bdaddr_t*)p_data, sizeof(bt_bdaddr_t));
+             }
+             else if (event == BTA_AV_PENDING_EVT)
+             {
+                  bdcpy(btif_av_cb.peer_bda.address, ((tBTA_AV*)p_data)->pend.bd_addr);
+             }
+             BTA_AvOpen(btif_av_cb.peer_bda.address, btif_av_cb.bta_handle,
+                    TRUE, BTA_SEC_NONE);
+             btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENING);
+        } break;
+
+        case BTA_AV_RC_OPEN_EVT:
+            /* IOP_FIX: Jabra 620 only does RC open without AV open whenever it connects. So
+             * as per the AV WP, an AVRC connection cannot exist without an AV connection. Therefore,
+             * we initiate an AV connection if an RC_OPEN_EVT is received when we are in AV_CLOSED state.
+             * We initiate the AV connection after a small 3s timeout to avoid any collisions from the
+             * headsets, as some headsets initiate the AVRC connection first and then
+             * immediately initiate the AV connection
+             *
+             * TODO: We may need to do this only on an AVRCP Play. FixMe
+             */
+
+            BTIF_TRACE_DEBUG0("BTA_AV_RC_OPEN_EVT received w/o AV");
+            memset(&tle_av_open_on_rc, 0, sizeof(tle_av_open_on_rc));
+            tle_av_open_on_rc.param = (UINT32)btif_initiate_av_open_tmr_hdlr;
+            btu_start_timer(&tle_av_open_on_rc, BTU_TTYPE_USER_FUNC,
+                            BTIF_TIMEOUT_AV_OPEN_ON_RC_SECS);
+            btif_rc_handler(event, p_data);
+            break;
+
+        case BTA_AV_REMOTE_CMD_EVT:
+        case BTA_AV_VENDOR_CMD_EVT:
+        case BTA_AV_META_MSG_EVT:
+        case BTA_AV_RC_FEAT_EVT:
+            btif_rc_handler(event, (tBTA_AV*)p_data);
+            break;
+
+        case BTA_AV_RC_CLOSE_EVT:
+            if (tle_av_open_on_rc.in_use) {
+                BTIF_TRACE_DEBUG0("BTA_AV_RC_CLOSE_EVT: Stopping AV timer.");
+                btu_stop_timer(&tle_av_open_on_rc);
+            }
+            btif_rc_handler(event, p_data);
+            break;
+
+        default:
+            BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
+                                dump_av_sm_event_name(event));
+            return FALSE;
+
+    }
+    return TRUE;
+}
+/*****************************************************************************
+**
+** Function        btif_av_state_opening_handler
+**
+** Description     Intermediate state managing events during establishment
+**                 of avdtp channel
+**
+** Returns         TRUE if event was processed, FALSE otherwise
+**
+*******************************************************************************/
+
+static BOOLEAN btif_av_state_opening_handler(btif_sm_event_t event, void *p_data)
+{
+    BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
+                     dump_av_sm_event_name(event), btif_av_cb.flags);
+
+    switch (event)
+    {
+        case BTIF_SM_ENTER_EVT:
+            /* inform the application that we are entering connecting state */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                      BTAV_CONNECTION_STATE_CONNECTING, &(btif_av_cb.peer_bda));
+            break;
+
+        case BTIF_SM_EXIT_EVT:
+            break;
+
+        case BTA_AV_OPEN_EVT:
+        {
+            tBTA_AV *p_bta_data = (tBTA_AV*)p_data;
+            btav_connection_state_t state;
+            btif_sm_state_t av_state;
+            BTIF_TRACE_DEBUG1("status:%d", p_bta_data->open.status);
+
+            if (p_bta_data->open.status == BTA_AV_SUCCESS)
+            {
+                 state = BTAV_CONNECTION_STATE_CONNECTED;
+                 av_state = BTIF_AV_STATE_OPENED;
+            }
+            else
+            {
+                BTIF_TRACE_WARNING1("BTA_AV_OPEN_EVT::FAILED status: %d",
+                                     p_bta_data->open.status );
+                state = BTAV_CONNECTION_STATE_DISCONNECTED;
+                av_state  = BTIF_AV_STATE_IDLE;
+            }
+
+            /* inform the application of the event */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                             state, &(btif_av_cb.peer_bda));
+            /* change state to open/idle based on the status */
+            btif_sm_change_state(btif_av_cb.sm_handle, av_state);
+            /* if queued PLAY command,  send it now */
+            btif_rc_check_handle_pending_play(p_bta_data->open.bd_addr,
+                                             (p_bta_data->open.status == BTA_AV_SUCCESS));
+            btif_queue_advance();
+        } break;
+
+        CHECK_RC_EVENT(event, p_data);
+
+        default:
+            BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
+                                dump_av_sm_event_name(event));
+            return FALSE;
+
+   }
+   return TRUE;
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_av_state_closing_handler
+**
+** Description     Intermediate state managing events during closing
+**                 of avdtp channel
+**
+** Returns         TRUE if event was processed, FALSE otherwise
+**
+*******************************************************************************/
+
+static BOOLEAN btif_av_state_closing_handler(btif_sm_event_t event, void *p_data)
+{
+    BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
+                     dump_av_sm_event_name(event), btif_av_cb.flags);
+
+    switch (event)
+    {
+        case BTIF_SM_ENTER_EVT:
+
+            /* immediately stop transmission of frames */
+            btif_a2dp_set_tx_flush(TRUE);
+            /* wait for audioflinger to stop a2dp */
+            break;
+
+        case BTIF_AV_STOP_STREAM_REQ_EVT:
+              /* immediately flush any pending tx frames while suspend is pending */
+              btif_a2dp_set_tx_flush(TRUE);
+
+              btif_a2dp_on_stopped(NULL);
+
+              break;
+
+        case BTIF_SM_EXIT_EVT:
+            break;
+
+        case BTA_AV_CLOSE_EVT:
+
+            /* inform the application that we are disconnecting */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
+
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
+            break;
+
+        /* Handle the RC_CLOSE event for the cleanup */
+        case BTA_AV_RC_CLOSE_EVT:
+            btif_rc_handler(event, (tBTA_AV*)p_data);
+            break;
+
+        default:
+            BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
+                                dump_av_sm_event_name(event));
+            return FALSE;
+   }
+   return TRUE;
+}
+
+
+/*****************************************************************************
+**
+** Function     btif_av_state_opened_handler
+**
+** Description  Handles AV events while AVDTP is in OPEN state
+**
+** Returns      TRUE if event was processed, FALSE otherwise
+**
+*******************************************************************************/
+
+static BOOLEAN btif_av_state_opened_handler(btif_sm_event_t event, void *p_data)
+{
+    tBTA_AV *p_av = (tBTA_AV*)p_data;
+
+    BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
+                     dump_av_sm_event_name(event), btif_av_cb.flags);
+
+    if ( (event == BTA_AV_REMOTE_CMD_EVT) && (btif_av_cb.flags & BTIF_AV_FLAG_REMOTE_SUSPEND) &&
+         (p_av->remote_cmd.rc_id == BTA_AV_RC_PLAY) )
+    {
+        BTIF_TRACE_EVENT1("%s: Resetting remote suspend flag on RC PLAY", __FUNCTION__);
+        btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
+    }
+
+    switch (event)
+    {
+        case BTIF_SM_ENTER_EVT:
+            btif_media_check_iop_exceptions(btif_av_cb.peer_bda.address);
+            break;
+
+        case BTIF_SM_EXIT_EVT:
+            break;
+
+        case BTIF_AV_START_STREAM_REQ_EVT:
+            btif_a2dp_setup_codec();
+            BTA_AvStart();
+            break;
+
+        case BTA_AV_START_EVT:
+        {
+            BTIF_TRACE_EVENT3("BTA_AV_START_EVT status %d, suspending %d, init %d",
+                p_av->start.status, p_av->start.suspending, p_av->start.initiator);
+
+            if ((p_av->start.status == BTA_SUCCESS) && (p_av->start.suspending == TRUE))
+                return TRUE;
+
+            btif_a2dp_on_started(&p_av->start);
+
+            /* remain in open state if status failed */
+            if (p_av->start.status != BTA_AV_SUCCESS)
+                return FALSE;
+
+            /* change state to started */
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_STARTED);
+
+        } break;
+
+        case BTIF_AV_DISCONNECT_REQ_EVT:
+            BTA_AvClose(btif_av_cb.bta_handle);
+
+            /* inform the application that we are disconnecting */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+               BTAV_CONNECTION_STATE_DISCONNECTING, &(btif_av_cb.peer_bda));
+            break;
+
+        case BTA_AV_CLOSE_EVT:
+
+            /* inform the application that we are disconnected */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
+
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
+            break;
+
+        CHECK_RC_EVENT(event, p_data);
+
+        default:
+            BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
+                               dump_av_sm_event_name(event));
+            return FALSE;
+
+    }
+    return TRUE;
+}
+
+/*****************************************************************************
+**
+** Function     btif_av_state_started_handler
+**
+** Description  Handles AV events while A2DP stream is started
+**
+** Returns      TRUE if event was processed, FALSE otherwise
+**
+*******************************************************************************/
+
+static BOOLEAN btif_av_state_started_handler(btif_sm_event_t event, void *p_data)
+{
+    tBTA_AV *p_av = (tBTA_AV*)p_data;
+
+    BTIF_TRACE_DEBUG3("%s event:%s flags %x", __FUNCTION__,
+                     dump_av_sm_event_name(event), btif_av_cb.flags);
+
+    switch (event)
+    {
+        case BTIF_SM_ENTER_EVT:
+
+            /* we are again in started state, clear any remote suspend flags */
+            btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
+
+            HAL_CBACK(bt_av_callbacks, audio_state_cb,
+                BTAV_AUDIO_STATE_STARTED, &(btif_av_cb.peer_bda));
+            break;
+
+        case BTIF_SM_EXIT_EVT:
+            break;
+
+        /* fixme -- use suspend = true always to work around issue with BTA AV */
+        case BTIF_AV_STOP_STREAM_REQ_EVT:
+        case BTIF_AV_SUSPEND_STREAM_REQ_EVT:
+
+            /* set pending flag to ensure btif task is not trying to restart
+               stream while suspend is in progress */
+            btif_av_cb.flags |= BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
+
+            /* if we were remotely suspended but suspend locally, local suspend
+               always overrides */
+            btif_av_cb.flags &= ~BTIF_AV_FLAG_REMOTE_SUSPEND;
+
+            /* immediately stop transmission of frames while suspend is pending */
+            btif_a2dp_set_tx_flush(TRUE);
+
+            BTA_AvStop(TRUE);
+            break;
+
+        case BTIF_AV_DISCONNECT_REQ_EVT:
+
+            /* request avdtp to close */
+            BTA_AvClose(btif_av_cb.bta_handle);
+
+            /* inform the application that we are disconnecting */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                BTAV_CONNECTION_STATE_DISCONNECTING, &(btif_av_cb.peer_bda));
+
+            /* wait in closing state until fully closed */
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_CLOSING);
+            break;
+
+        case BTA_AV_SUSPEND_EVT:
+
+            BTIF_TRACE_EVENT2("BTA_AV_SUSPEND_EVT status %d, init %d",
+                 p_av->suspend.status, p_av->suspend.initiator);
+
+            /* a2dp suspended, stop media task until resumed */
+            btif_a2dp_on_suspended(&p_av->suspend);
+
+            /* if not successful, remain in current state */
+            if (p_av->suspend.status != BTA_AV_SUCCESS)
+            {
+                btif_av_cb.flags &= ~BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
+
+                /* suspend failed, reset back tx flush state */
+                btif_a2dp_set_tx_flush(FALSE);
+                return FALSE;
+            }
+
+            if (p_av->suspend.initiator != TRUE)
+            {
+                /* remote suspend, notify HAL and await audioflinger to
+                   suspend/stop stream */
+
+                /* set remote suspend flag to block media task from restarting
+                   stream only if we did not already initiate a local suspend */
+                if ((btif_av_cb.flags & BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING) == 0)
+                    btif_av_cb.flags |= BTIF_AV_FLAG_REMOTE_SUSPEND;
+
+                HAL_CBACK(bt_av_callbacks, audio_state_cb,
+                        BTAV_AUDIO_STATE_REMOTE_SUSPEND, &(btif_av_cb.peer_bda));
+            }
+            else
+            {
+                HAL_CBACK(bt_av_callbacks, audio_state_cb,
+                        BTAV_AUDIO_STATE_STOPPED, &(btif_av_cb.peer_bda));
+            }
+
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENED);
+
+            /* suspend completed and state changed, clear pending status */
+            btif_av_cb.flags &= ~BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING;
+            break;
+
+        case BTA_AV_STOP_EVT:
+
+            btif_a2dp_on_stopped(&p_av->suspend);
+
+            HAL_CBACK(bt_av_callbacks, audio_state_cb,
+                      BTAV_AUDIO_STATE_STOPPED, &(btif_av_cb.peer_bda));
+
+            /* if stop was successful, change state to open */
+            if (p_av->suspend.status == BTA_AV_SUCCESS)
+                btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_OPENED);
+
+            break;
+
+        case BTA_AV_CLOSE_EVT:
+
+            /* avdtp link is closed */
+
+            btif_a2dp_on_stopped(NULL);
+
+            /* inform the application that we are disconnected */
+            HAL_CBACK(bt_av_callbacks, connection_state_cb,
+                BTAV_CONNECTION_STATE_DISCONNECTED, &(btif_av_cb.peer_bda));
+
+            btif_sm_change_state(btif_av_cb.sm_handle, BTIF_AV_STATE_IDLE);
+            break;
+
+        CHECK_RC_EVENT(event, p_data);
+
+        default:
+            BTIF_TRACE_WARNING2("%s : unhandled event:%s", __FUNCTION__,
+                                 dump_av_sm_event_name(event));
+            return FALSE;
+
+    }
+    return TRUE;
+}
+
+/*****************************************************************************
+**  Local event handlers
+******************************************************************************/
+
+static void btif_av_handle_event(UINT16 event, char* p_param)
+{
+    btif_sm_dispatch(btif_av_cb.sm_handle, event, (void*)p_param);
+}
+
+static void bte_av_callback(tBTA_AV_EVT event, tBTA_AV *p_data)
+{
+    /* Switch to BTIF context */
+    btif_transfer_context(btif_av_handle_event, event,
+                          (char*)p_data, sizeof(tBTA_AV), NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_init
+**
+** Description      Initializes btif AV if not already done
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_av_init(void)
+{
+    if (btif_av_cb.sm_handle == NULL)
+    {
+        if (btif_a2dp_start_media_task() != GKI_SUCCESS)
+            return BT_STATUS_FAIL;
+
+        btif_enable_service(BTA_A2DP_SERVICE_ID);
+
+        /* Initialize the AVRC CB */
+        btif_rc_init();
+
+        /* Also initialize the AV state machine */
+        btif_av_cb.sm_handle = btif_sm_init((const btif_sm_handler_t*)btif_av_state_handlers, BTIF_AV_STATE_IDLE);
+
+        btif_a2dp_on_init();
+
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_DONE;
+}
+
+/*******************************************************************************
+**
+** Function         init
+**
+** Description      Initializes the AV interface
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+static bt_status_t init(btav_callbacks_t* callbacks )
+{
+    int status;
+
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    if (bt_av_callbacks)
+        return BT_STATUS_DONE;
+
+    bt_av_callbacks = callbacks;
+    btif_av_cb.sm_handle = NULL;
+
+    return btif_av_init();
+}
+
+/*******************************************************************************
+**
+** Function         connect
+**
+** Description      Establishes the AV signalling channel with the remote headset
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+static bt_status_t connect_int(bt_bdaddr_t *bd_addr)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    btif_sm_dispatch(btif_av_cb.sm_handle, BTIF_AV_CONNECT_REQ_EVT, (char*)bd_addr);
+
+    return BT_STATUS_SUCCESS;
+}
+
+static bt_status_t connect(bt_bdaddr_t *bd_addr)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    CHECK_BTAV_INIT();
+
+    return btif_queue_connect(UUID_SERVCLASS_AUDIO_SOURCE, bd_addr, connect_int);
+}
+
+/*******************************************************************************
+**
+** Function         disconnect
+**
+** Description      Tears down the AV signalling channel with the remote headset
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t disconnect(bt_bdaddr_t *bd_addr)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    CHECK_BTAV_INIT();
+
+    /* Switch to BTIF context */
+    return btif_transfer_context(btif_av_handle_event, BTIF_AV_DISCONNECT_REQ_EVT,
+                                 (char*)bd_addr, sizeof(bt_bdaddr_t), NULL);
+}
+
+/*******************************************************************************
+**
+** Function         cleanup
+**
+** Description      Shuts down the AV interface and does the cleanup
+**
+** Returns          None
+**
+*******************************************************************************/
+static void cleanup(void)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    if (bt_av_callbacks)
+    {
+        btif_a2dp_stop_media_task();
+
+        btif_disable_service(BTA_A2DP_SERVICE_ID);
+        bt_av_callbacks = NULL;
+
+        /* Also shut down the AV state machine */
+        btif_sm_shutdown(btif_av_cb.sm_handle);
+        btif_av_cb.sm_handle = NULL;
+    }
+    return;
+}
+
+static const btav_interface_t bt_av_interface = {
+    sizeof(btav_interface_t),
+    init,
+    connect,
+    disconnect,
+    cleanup,
+};
+
+/*******************************************************************************
+**
+** Function         btif_av_get_sm_handle
+**
+** Description      Fetches current av SM handle
+**
+** Returns          None
+**
+*******************************************************************************/
+
+btif_sm_handle_t btif_av_get_sm_handle(void)
+{
+    return btif_av_cb.sm_handle;
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_stream_ready
+**
+** Description      Checks whether AV is ready for starting a stream
+**
+** Returns          None
+**
+*******************************************************************************/
+
+BOOLEAN btif_av_stream_ready(void)
+{
+    btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
+
+    BTIF_TRACE_DEBUG3("btif_av_stream_ready : sm hdl %d, state %d, flags %x",
+                btif_av_cb.sm_handle, state, btif_av_cb.flags);
+
+    /* also make sure main adapter is enabled */
+    if (btif_is_enabled() == 0)
+    {
+        BTIF_TRACE_EVENT0("main adapter not enabled");
+        return FALSE;
+    }
+
+    /* check if we are remotely suspended */
+    if (btif_av_cb.flags & BTIF_AV_FLAG_REMOTE_SUSPEND)
+        return FALSE;
+
+    return (state == BTIF_AV_STATE_OPENED);
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_stream_started_ready
+**
+** Description      Checks whether AV ready for media start in streaming state
+**
+** Returns          None
+**
+*******************************************************************************/
+
+BOOLEAN btif_av_stream_started_ready(void)
+{
+    btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
+
+    BTIF_TRACE_DEBUG3("btif_av_stream_started : sm hdl %d, state %d, flags %x",
+                btif_av_cb.sm_handle, state, btif_av_cb.flags);
+
+    /* don't allow media task to start if we are suspending or
+       remotely suspended (not yet changed state) */
+    if (btif_av_cb.flags & (BTIF_AV_FLAG_LOCAL_SUSPEND_PENDING | BTIF_AV_FLAG_REMOTE_SUSPEND))
+        return FALSE;
+
+    return (state == BTIF_AV_STATE_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         btif_dispatch_sm_event
+**
+** Description      Send event to AV statemachine
+**
+** Returns          None
+**
+*******************************************************************************/
+
+/* used to pass events to AV statemachine from other tasks */
+void btif_dispatch_sm_event(btif_av_sm_event_t event, void *p_data, int len)
+{
+    /* Switch to BTIF context */
+    btif_transfer_context(btif_av_handle_event, event,
+                          (char*)p_data, len, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_execute_service
+**
+** Description      Initializes/Shuts down the service
+**
+** Returns          BT_STATUS_SUCCESS on success, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_av_execute_service(BOOLEAN b_enable)
+{
+     if (b_enable)
+     {
+         /* TODO: Removed BTA_SEC_AUTHORIZE since the Java/App does not
+          * handle this request in order to allow incoming connections to succeed.
+          * We need to put this back once support for this is added */
+
+         /* Added BTA_AV_FEAT_NO_SCO_SSPD - this ensures that the BTA does not
+          * auto-suspend av streaming on AG events(SCO or Call). The suspend shall
+          * be initiated by the app/audioflinger layers */
+         BTA_AvEnable(BTA_SEC_AUTHENTICATE, (BTA_AV_FEAT_RCTG | BTA_AV_FEAT_NO_SCO_SSPD),
+                      bte_av_callback);
+         BTA_AvRegister(BTA_AV_CHNL_AUDIO, BTIF_AV_SERVICE_NAME, 0);
+     }
+     else {
+         BTA_AvDeregister(btif_av_cb.bta_handle);
+         BTA_AvDisable();
+     }
+     return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_get_interface
+**
+** Description      Get the AV callback interface
+**
+** Returns          btav_interface_t
+**
+*******************************************************************************/
+const btav_interface_t *btif_av_get_interface(void)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    return &bt_av_interface;
+}
+
+/*******************************************************************************
+**
+** Function         btif_av_is_rc_open_without_a2dp
+**
+** Description      Checks if GAVDTP Open notification to app is pending (2 second timer)
+**
+** Returns          boolean
+**
+*******************************************************************************/
+BOOLEAN btif_av_is_connected(void)
+{
+    btif_sm_state_t state = btif_sm_get_state(btif_av_cb.sm_handle);
+    return ((state == BTIF_AV_STATE_OPENED) || (state ==  BTIF_AV_STATE_STARTED));
+}
diff --git a/btif/src/btif_config.c b/btif/src/btif_config.c
new file mode 100644
index 0000000..00e40bd
--- /dev/null
+++ b/btif/src/btif_config.c
@@ -0,0 +1,744 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_config.c
+ *
+ *  Description:   Stores the local BT adapter and remote device properties in
+ *                 NVRAM storage, typically as xml file in the
+ *                 mobile's filesystem
+ *
+ *
+ ***********************************************************************************/
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <stdlib.h>
+#include <private/android_filesystem_config.h>
+
+#define LOG_TAG "btif_config.c"
+
+#include <hardware/bluetooth.h>
+#include "btif_config.h"
+#include "btif_config_util.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_util.h"
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define warn(fmt, ...) ALOGW ("## WARNING : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+//#define UNIT_TEST
+#define CFG_PATH "/data/misc/bluedroid/"
+#define CFG_FILE_NAME "bt_config"
+#define CFG_FILE_EXT ".xml"
+#define CFG_FILE_EXT_OLD ".old"
+#define CFG_FILE_EXT_NEW ".new"
+#define CFG_GROW_SIZE (10*sizeof(cfg_node))
+#define GET_CHILD_MAX_COUNT(node) (short)((int)(node)->bytes / sizeof(cfg_node))
+#define IS_EMPTY(node) ((node)->name == NULL)
+#define GET_NODE_COUNT(bytes) (bytes / sizeof(cfg_node))
+#define MAX_NODE_BYTES 32000
+#define MAX_CACHED_COUNT 150
+#define CFG_CMD_SAVE 1
+
+#ifndef FALSE
+#define TRUE 1
+#define FALSE 0
+#endif
+typedef struct cfg_node_s
+{
+    const char* name;
+    union
+    {
+        struct cfg_node_s* child;
+        char* value;
+    };
+    short bytes;
+    short type;
+    short used;
+    short flag;
+} cfg_node;
+
+static pthread_mutex_t slot_lock;
+static int pth = -1; //poll thread handle
+static cfg_node root;
+static int cached_change;
+static void cfg_cmd_callback(int cmd_fd, int type, int flags, uint32_t user_id);
+static inline short alloc_node(cfg_node* p, short grow);
+static inline void free_node(cfg_node* p);
+static inline void free_inode(cfg_node* p, int child);
+static inline short find_inode(const cfg_node* p, const char* name);
+static cfg_node* find_node(const char* section, const char* key, const char* name);
+static int remove_node(const char* section, const char* key, const char* name);
+static inline cfg_node* find_free_node(cfg_node* p);
+static int set_node(const char* section, const char* key, const char* name,
+                        const char* value, short bytes, short type);
+static int save_cfg();
+static void load_cfg();
+static short find_next_node(const cfg_node* p, short start, char* name, int* bytes);
+static int create_dir(const char* path);
+#ifdef UNIT_TEST
+static void cfg_test_load();
+static void cfg_test_write();
+static void cfg_test_read();
+#endif
+static inline void dump_node(const char* title, const cfg_node* p)
+{
+    if(p)
+        debug("%s, p->name:%s, child/value:%p, bytes:%d, p->used:%d, type:%x, p->flag:%d",
+            title, p->name, p->child, p->bytes, p->used, p->type, p->flag);
+    else debug("%s is NULL", title);
+}
+////////////////////////////////////////////////////////////////////////////////////////////////////////////
+int btif_config_init()
+{
+    static int initialized;
+    debug("in initialized:%d", initialized);
+    if(!initialized)
+    {
+        initialized = 1;
+        struct stat st;
+        if(stat(CFG_PATH, &st) != 0)
+            error("%s does not exist, need provision", CFG_PATH);
+        btsock_thread_init();
+        init_slot_lock(&slot_lock);
+        lock_slot(&slot_lock);
+        root.name = "Bluedroid";
+        alloc_node(&root, CFG_GROW_SIZE);
+        dump_node("root", &root);
+        pth = btsock_thread_create(NULL, cfg_cmd_callback);
+        load_cfg();
+        unlock_slot(&slot_lock);
+        #ifdef UNIT_TEST
+            //cfg_test_load();
+            cfg_test_write();
+            cfg_test_read();
+        #endif
+    }
+    return pth >= 0;
+}
+int btif_config_get_int(const char* section, const char* key, const char* name, int* value)
+{
+    int size = sizeof(*value);
+    int type = BTIF_CFG_TYPE_INT;
+    return btif_config_get(section, key, name, (char*)value, &size, &type);
+}
+int btif_config_set_int(const char* section, const char* key, const char* name, int value)
+{
+    return btif_config_set(section, key, name, (char*)&value, sizeof(value), BTIF_CFG_TYPE_INT);
+}
+int btif_config_get_str(const char* section, const char* key, const char* name, char* value, int* size)
+{
+    int type = BTIF_CFG_TYPE_STR;
+    if(value)
+        *value = 0;
+    return btif_config_get(section, key, name, value, size, &type);
+}
+int btif_config_set_str(const char* section, const char* key, const char* name, const char* value)
+{
+   value = value ? value : "";
+   return btif_config_set(section, key, name, value, strlen(value) + 1, BTIF_CFG_TYPE_STR);
+}
+int btif_config_exist(const char* section, const char* key, const char* name)
+{
+    int ret = FALSE;
+    if(section && *section && key && *key)
+    {
+        lock_slot(&slot_lock);
+        ret = find_node(section, key, name) != NULL;
+        unlock_slot(&slot_lock);
+    }
+    return ret;
+}
+int btif_config_get(const char* section, const char* key, const char* name, char* value, int* bytes, int* type)
+{
+    //debug("in");
+
+    int ret = FALSE;
+    asrt(section && *section && key && *key && name && *name && bytes && type);
+    //debug("section:%s, key:%s, name:%s, value:%p, bytes:%d, type:%d",
+    //            section, key, name, value, *bytes, *type);
+    if(section && *section && key && *key && name && *name && bytes && type)
+    {
+        lock_slot(&slot_lock);
+        const cfg_node* node = find_node(section, key, name);
+        dump_node("found node", node);
+        if(node)
+        {
+            if(*type == node->type && value && *bytes >= node->used)
+            {
+                if(node->used > 0)
+                    memcpy(value, node->value, node->used);
+                ret = TRUE;
+            }
+            *type = node->type;
+            *bytes = node->used;
+            if(ret != TRUE)
+            {
+                if(*type != node->type)
+                    error("value:%s, wrong type:%d, need to be type: %d", name, *type, node->type);
+                if(value && *bytes < node->used)
+                    error("value:%s, not enough size: %d bytes, need %d bytes", name, node->used, *bytes);
+            }
+        }
+        unlock_slot(&slot_lock);
+    }
+    //debug("out");
+    return ret;
+}
+int btif_config_set(const char* section, const char* key, const char* name, const char*  value, int bytes, int type)
+{
+    int ret = FALSE;
+    asrt(section && *section && key && *key && name && *name);
+    asrt(bytes < MAX_NODE_BYTES);
+    if(section && *section && key && *key && name && *name && bytes < MAX_NODE_BYTES)
+    {
+        lock_slot(&slot_lock);
+        ret = set_node(section, key, name, value, (short)bytes, (short)type);
+        if(ret && !(type & BTIF_CFG_TYPE_VOLATILE) && ++cached_change > MAX_CACHED_COUNT)
+        {
+            cached_change = 0;
+            btsock_thread_post_cmd(pth, CFG_CMD_SAVE, NULL, 0, 0);
+        }
+
+        unlock_slot(&slot_lock);
+    }
+    return ret;
+}
+int btif_config_remove(const char* section, const char* key, const char* name)
+{
+    asrt(section && *section && key && *key);
+    int ret = FALSE;
+    if(section && *section && key && *key)
+    {
+         lock_slot(&slot_lock);
+         ret = remove_node(section, key, name);
+         if(ret)
+            cached_change++;
+         unlock_slot(&slot_lock);
+    }
+    return ret;
+}
+typedef struct {
+    short si;
+    short ki;
+    short vi;
+    short reserved;
+} cfg_node_pos;
+short btif_config_next_key(short pos, const char* section, char * name, int* bytes)
+{
+    int next = -1;
+    lock_slot(&slot_lock);
+    short si = find_inode(&root, section);
+    if(si >= 0)
+    {
+        const cfg_node* section_node = &root.child[si];
+        next = find_next_node(section_node, pos, name, bytes);
+    }
+    unlock_slot(&slot_lock);
+    return next;
+}
+short btif_config_next_value(short pos, const char* section, const char* key, char* name, int* bytes)
+{
+    int next = -1;
+    lock_slot(&slot_lock);
+    short si = find_inode(&root, section);
+    if(si >= 0)
+    {
+        const cfg_node* section_node = &root.child[si];
+        short ki = find_inode(section_node, key);
+        if(ki >= 0)
+        {
+            const cfg_node* key_node = &section_node->child[ki];
+            next = find_next_node(key_node, pos, name, bytes);
+        }
+    }
+    unlock_slot(&slot_lock);
+    return next;
+}
+int btif_config_enum(btif_config_enum_callback cb, void* user_data)
+{
+    asrt(cb);
+    if(!cb)
+        return FALSE;
+    lock_slot(&slot_lock);
+    int si, ki, vi;
+    cfg_node *section_node, *key_node, *value_node;
+    for(si = 0; si < GET_CHILD_MAX_COUNT(&root); si++)
+    {
+        section_node = &root.child[si];
+        if(section_node->name && *section_node->name)
+        {
+            for(ki = 0; ki < GET_CHILD_MAX_COUNT(section_node); ki++)
+            {
+                key_node = &section_node->child[ki];
+                if(key_node->name && *key_node->name)
+                {
+                    for(vi = 0; vi < GET_CHILD_MAX_COUNT(key_node); vi++)
+                    {
+                        value_node = &key_node->child[vi];
+                        if(value_node->name && *value_node->name)
+                        {
+                            cb(user_data, section_node->name, key_node->name, value_node->name,
+                                            value_node->value, value_node->used, value_node->type);
+                        }
+                    }
+                }
+            }
+        }
+    }
+    unlock_slot(&slot_lock);
+    return TRUE;
+}
+int btif_config_save()
+{
+    lock_slot(&slot_lock);
+    if(cached_change > 0)
+    {
+        cached_change = 0;
+        btsock_thread_post_cmd(pth, CFG_CMD_SAVE, NULL, 0, 0);
+    }
+    unlock_slot(&slot_lock);
+    return TRUE;
+}
+void btif_config_flush()
+{
+    lock_slot(&slot_lock);
+    if(cached_change > 0)
+        save_cfg();
+    unlock_slot(&slot_lock);
+}
+/////////////////////////////////////////////////////////////////////////////////////////////
+static inline short alloc_node(cfg_node* p, short grow)
+{
+    int new_bytes = p->bytes + grow;
+    //debug("in, bytes:%d, new bytes:%d, grow:%d", p->bytes, new_bytes, grow);
+    if(grow > 0 && new_bytes < MAX_NODE_BYTES)
+    {
+        char* value = (char*)realloc(p->value, new_bytes);
+        if(value)
+        {
+            short old_bytes = p->bytes;
+            //clear to zero
+            memset(value + old_bytes, 0, grow);
+            p->bytes = old_bytes + grow;
+            p->value = value;
+            //debug("out");
+            return old_bytes;//return the previous size
+        }
+        else error("realloc failed, old_bytes:%d, grow:%d, total:%d", p->bytes, grow,  p->bytes + grow);
+    }
+    //debug("out, alloc failed");
+    return -1;
+}
+static inline void free_node(cfg_node* p)
+{
+    if(p)
+    {
+        if(p->child)
+        {
+            free(p->child);
+            p->child = NULL;
+        }
+        if(p->name)
+        {
+            free((void*)p->name);
+            p->name = 0;
+        }
+        p->used = p->bytes = p->flag = p->type = 0;
+    }
+}
+static inline short find_inode(const cfg_node* p, const char* name)
+{
+    //debug("in");
+    if(p && p->child && name && *name)
+    {
+        int i;
+        int count = GET_CHILD_MAX_COUNT(p);
+        //debug("child name:%s, child max count:%d", name, count);
+        for(i = 0; i < count; i++)
+        {
+            if(p->child[i].name && *p->child[i].name &&
+                strcmp(p->child[i].name, name) == 0)
+            {
+                  //debug("out found child index:%d", i);
+                  return (short)i;
+            }
+        }
+    }
+    //debug("out, child name: %s not found", name);
+    return -1;
+}
+static inline cfg_node* find_free_node(cfg_node* p)
+{
+    if(p && p->child)
+    {
+        int i;
+        int count = GET_CHILD_MAX_COUNT(p);
+        //debug("p->name:%s, max child count:%d", p->name, count);
+        for(i = 0; i < count; i++)
+        {
+            if(IS_EMPTY(p->child + i))
+                return p->child + i;
+        }
+    }
+    return NULL;
+}
+static cfg_node* find_add_node(cfg_node* p, const char* name)
+{
+    int i = -1;
+    cfg_node* node = NULL;
+    //debug("in, p->name:%s, p->bytes:%d, adding child:%s", p->name, p->bytes, name);
+    if((i = find_inode(p, name)) < 0)
+    {
+        if(!(node = find_free_node(p)))
+        {
+            int old_size = alloc_node(p, CFG_GROW_SIZE);
+            if(old_size >= 0)
+            {
+                i = GET_NODE_COUNT(old_size);
+                node = &p->child[i];
+            }
+        }
+    }
+    else node = &p->child[i];
+    if(!node->name)
+        node->name = strdup(name);
+    //debug("out");
+    return node;
+}
+static int set_node(const char* section, const char* key, const char* name,
+                    const char* value, short bytes, short type)
+{
+    int si = -1, ki = -1, vi = -1;
+    cfg_node* section_node = NULL;
+    //debug("in");
+    //dump_node("root", &root);
+    if((section_node = find_add_node(&root, section)))
+    {
+        //dump_node("section node", section_node);
+        cfg_node* key_node;
+        if((key_node = find_add_node(section_node, key)))
+        {
+            //dump_node("key node", key_node);
+            cfg_node* value_node;
+            if((value_node = find_add_node(key_node, name)))
+            {
+                //dump_node("value node", value_node);
+                if(value_node->bytes < bytes)
+                {
+                    if(value_node->value)
+                        free(value_node->value);
+                    value_node->value = (char*)malloc(bytes);
+                    if(value_node->value)
+                        value_node->bytes = bytes;
+                    else
+                    {
+                        error("not enough memory!");
+                        value_node->bytes = 0;
+                        return FALSE;
+                    }
+                }
+                if(value_node->value && value != NULL && bytes > 0)
+                    memcpy(value_node->value, value, bytes);
+                value_node->type = type;
+                value_node->used = bytes;
+                //dump_node("changed value node", value_node);
+                return TRUE;
+            }
+        }
+    }
+    return FALSE;
+}
+static cfg_node* find_node(const char* section, const char* key, const char* name)
+{
+    int si = -1, ki = -1, vi = -1;
+    if((si = find_inode(&root, section)) >= 0)
+    {
+        cfg_node* section_node = &root.child[si];
+        if(key)
+        {
+            //dump_node("found section node", section_node);
+            if((ki = find_inode(section_node, key)) >= 0)
+            {
+                cfg_node* key_node = &section_node->child[ki];
+                //dump_node("found key node", key_node);
+                if(name)
+                {
+                    if((vi = find_inode(key_node, name)) >= 0)
+                    {
+                        //dump_node("found value node", &key_node->child[vi]);
+                        return &key_node->child[vi];
+                    }
+                    //debug("value node:%s not found", name);
+                    return NULL;
+                }
+                return key_node;
+            }
+            //debug("key node:%s not found", key);
+            return NULL;
+        }
+        return section_node;
+    }
+    //debug("section node:%s not found", section);
+    return NULL;
+}
+static short find_next_node(const cfg_node* p, short start, char* name, int* bytes)
+{
+    asrt(0 <= start && start < GET_CHILD_MAX_COUNT(p));
+    //debug("in, start:%d, max child count:%d", start, GET_CHILD_MAX_COUNT(p));
+    //dump_node("find_next_node, parent", p);
+    short next = -1;
+    if(name) *name = 0;
+    if(0 <= start && start < GET_CHILD_MAX_COUNT(p))
+    {
+        int i;
+        for(i = start; i < GET_CHILD_MAX_COUNT(p); i++)
+        {
+            cfg_node* child = &p->child[i];
+            if(child->name)
+            {
+                int name_bytes = strlen(child->name) + 1;
+                if(name && bytes && *bytes >= name_bytes)
+                {
+                    memcpy(name, child->name, name_bytes);
+                    if(i + 1 < GET_CHILD_MAX_COUNT(p))
+                        next = (short)(i + 1);
+                    *bytes = name_bytes;
+                }
+                else if(bytes)
+                {
+                    //debug("not enough room to copy the name, size in:%d, size needed:%d", *bytes, name_bytes);
+                    *bytes = name_bytes;
+                }
+                break;
+            }
+        }
+    }
+    return next;
+}
+static int remove_node(const char* section, const char* key, const char* name)
+{
+    short  si = -1, ki = -1, vi = -1;
+    if((si = find_inode(&root, section)) >= 0)
+    {
+        cfg_node* section_node = &root.child[si];
+        if((ki = find_inode(section_node, key)) >= 0)
+        {
+            cfg_node* key_node = &section_node->child[ki];
+            if(name == NULL)
+            {
+                int count = GET_CHILD_MAX_COUNT(key_node);
+                int i;
+                for(i = 0; i < count; i++)
+                    free_node(&key_node->child[i]);
+                free_node(key_node);
+                return TRUE;
+            }
+            else if((vi = find_inode(key_node, name)) >= 0)
+            {
+                //debug("remove value:%s", key_node->child[vi].name);
+                free_node(&key_node->child[vi]);
+                return TRUE;
+            }
+        }
+    }
+    return FALSE;
+}
+static int save_cfg()
+{
+    debug("in");
+    const char* file_name = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT;
+    const char* file_name_new = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT_NEW;
+    const char* file_name_old = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT_OLD;
+    int ret = FALSE;
+    if(access(file_name_old,  F_OK) == 0)
+        unlink(file_name_old);
+    if(access(file_name_new, F_OK) == 0)
+        unlink(file_name_new);
+   if(btif_config_save_file(file_name_new))
+    {
+        cached_change = 0;
+        chown(file_name_new, -1, AID_NET_BT_STACK);
+        chmod(file_name_new, 0660);
+        rename(file_name, file_name_old);
+        rename(file_name_new, file_name);
+        ret = TRUE;
+    }
+    else error("btif_config_save_file failed");
+    debug("out");
+    return ret;
+}
+
+static int load_bluez_cfg()
+{
+    char adapter_path[256];
+    if(load_bluez_adapter_info(adapter_path, sizeof(adapter_path)))
+    {
+        if(load_bluez_linkkeys(adapter_path))
+            return TRUE;
+    }
+    return FALSE;
+}
+static void remove_bluez_cfg()
+{
+    rename(BLUEZ_PATH, BLUEZ_PATH_BAK);
+}
+static void load_cfg()
+{
+    const char* file_name = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT;
+    const char* file_name_new = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT_NEW;
+    const char* file_name_old = CFG_PATH CFG_FILE_NAME CFG_FILE_EXT_OLD;
+    if(!btif_config_load_file(file_name))
+    {
+        unlink(file_name);
+        if(!btif_config_load_file(file_name_old))
+        {
+            unlink(file_name_old);
+            if(load_bluez_cfg() && save_cfg())
+                remove_bluez_cfg();
+        }
+    }
+}
+static void cfg_cmd_callback(int cmd_fd, int type, int size, uint32_t user_id)
+{
+    debug("cmd type:%d, size:%d", type, size);
+    switch(type)
+    {
+        case CFG_CMD_SAVE:
+            lock_slot(&slot_lock);
+            save_cfg();
+            unlock_slot(&slot_lock);
+            break;
+    }
+}
+#ifdef UNIT_TEST
+static void cfg_test_load()
+{
+    load_cfg();
+    char kname[128], vname[128];
+    short kpos, vpos;
+    int kname_size, vname_size;
+    debug("in");
+    debug("list all remote devices values:");
+    kname_size = sizeof(kname);
+    kname[0] = 0;
+    kpos = 0;
+    do
+    {
+        kpos = btif_config_next_key(kpos, "Remote Devices", kname, &kname_size);
+        debug("Remote devices:%s, size:%d", kname, kname_size);
+        vpos = 0;
+        vname[0] = 0;
+        vname_size = sizeof(vname);
+        while((vpos = btif_config_next_value(vpos, "Remote Devices", kname, vname, &vname_size)) != -1)
+        {
+            char v[128] = {0};
+            int vtype = BTIF_CFG_TYPE_STR;
+            int vsize = sizeof(v);
+            int ret = btif_config_get("Remote Devices", kname, vname, v, &vsize, &vtype);
+            debug("btif_config_get return:%d, Remote devices:%s, value name:%s, value:%s, value size:%d, type:0x%x",
+                    ret, kname, vname, v, vsize, vtype);
+
+            vname[0] = 0;
+            vname_size = sizeof(vname);
+        }
+        kname[0] = 0;
+        kname_size = sizeof(kname);
+    } while(kpos != -1);
+    debug("out");
+}
+static void cfg_test_write()
+{
+    debug("in");
+    int i;
+
+    char key[128];
+    const char* section;
+    char link_key[64];
+    for(i = 0; i < (int)sizeof(link_key); i++)
+        link_key[i] = i;
+    for(i = 0; i < 100; i++)
+    {
+        sprintf(key, "00:22:5F:97:56:%02d", i);
+        link_key[0] = i;
+        section = "Remote Devices";
+        btif_config_set_str(section, key, "class", "smart phone");
+        btif_config_set(section, key, "link keys", link_key, sizeof(link_key), BTIF_CFG_TYPE_BIN);
+        btif_config_set_int(section, key, "connect time out", i);
+    }
+    btif_config_save();
+    debug("out");
+}
+static void cfg_test_read()
+{
+    debug("in");
+    char class[128] = {0};
+    char link_key[128] = {0};
+    int size, type;
+    char key[128];
+    const char* section;
+    int ret, i;
+    for(i = 0; i < 100; i++)
+    {
+        sprintf(key, "00:22:5F:97:56:%02d", i);
+        section = "Remote Devices";
+        size = sizeof(class);
+        ret = btif_config_get_str(section, key, "class", class, &size);
+        debug("btif_config_get_str return:%d, Remote devices:%s, class:%s", ret, key, class);
+
+        size = sizeof(link_key);
+        type = BTIF_CFG_TYPE_BIN;
+        ret = btif_config_get(section, key, "link keys", link_key, &size, &type);
+        debug("btif_config_get return:%d, Remote devices:%s, link key:%x, %x",
+                    ret, key, *(int *)link_key, *((int *)link_key + 1));
+
+        int timeout;
+        ret = btif_config_get_int(section, key, "connect time out", &timeout);
+        debug("btif_config_get_int return:%d, Remote devices:%s, connect time out:%d", ret, key, timeout);
+    }
+
+    debug("testing btif_config_remove");
+    size = sizeof(class);
+    type = BTIF_CFG_TYPE_STR;
+    btif_config_set("Remote Devices", "00:22:5F:97:56:04", "Class Delete", class, strlen(class) + 1, BTIF_CFG_TYPE_STR);
+
+    btif_config_get("Remote Devices", "00:22:5F:97:56:04", "Class Delete", class, &size, &type);
+    debug("Remote devices, 00:22:5F:97:56:04 Class Delete:%s", class);
+    btif_config_remove("Remote Devices", "00:22:5F:97:56:04", "Class Delete");
+
+    size = sizeof(class);
+    type = BTIF_CFG_TYPE_STR;
+    ret = btif_config_get("Remote Devices", "00:22:5F:97:56:04", "Class Delete", class, &size, &type);
+    debug("after removed, btif_config_get ret:%d, Remote devices, 00:22:5F:97:56:04 Class Delete:%s", ret, class);
+    debug("out");
+}
+#endif
diff --git a/btif/src/btif_config_util.cpp b/btif/src/btif_config_util.cpp
new file mode 100644
index 0000000..19fa30b
--- /dev/null
+++ b/btif/src/btif_config_util.cpp
@@ -0,0 +1,674 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/statfs.h>
+#include <sys/vfs.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <limits.h>
+#include <sys/file.h>
+#include <sys/mman.h>
+
+#include "btif_config.h"
+#include "btif_config_util.h"
+#ifndef ANDROID_NDK
+#define ANDROID_NDK
+#endif
+#include "tinyxml2.h"
+#ifndef FALSE
+#define TRUE 1
+#define FALSE 0
+#endif
+#define LOG_TAG "btif_config_util"
+extern "C" {
+#include "btif_sock_util.h"
+}
+#include <stdlib.h>
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define warn(fmt, ...) ALOGW ("## WARNING : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+#define BLUEDROID_ROOT "Bluedroid"
+#define BLUEDROID_NAME_TAG "Tag"
+#define BLUEDROID_VALUE_TYPE "Type"
+#define BLUEDROID_TAG_REMOTE_DEVICE "Remote Devices"
+
+using namespace tinyxml2;
+struct enum_user_data
+{
+    const char* sn; //current section name
+    const char* kn; //current key name
+    const char* vn; //current value name
+    int si, ki, vi;
+    XMLDocument* xml;
+    XMLElement* se;
+    XMLElement* ke;
+    XMLElement* ve;
+};
+
+
+static int type_str2int(const char* type);
+static const char* type_int2str(int type);
+static inline void create_ele_name(int index, char* element, int len);
+static inline int validate_ele_name(const char* key);
+static int parse_sections(const char* section_name, const XMLElement* section);
+static void enum_config(void* user_data, const char* section, const char* key, const char* name,
+                                          const char*  value, int bytes, int type);
+static inline void bytes2hex(const char* data, int bytes, char* str)
+{
+    static const char* hex_table = "0123456789abcdef";
+    for(int i = 0; i < bytes; i++)
+    {
+        *str = hex_table[(data[i] >> 4) & 0xf];
+        ++str;
+        *str = hex_table[data[i] & 0xf];
+        ++str;
+    }
+    *str = 0;
+}
+static inline int hex2byte(char hex)
+{
+    if('0' <= hex && hex <= '9')
+        return hex - '0';
+    if('a' <= hex && hex <= 'z')
+        return hex - 'a' + 0xa;
+    if('A' <= hex && hex <= 'Z')
+        return hex - 'A' + 0xa;
+    return -1;
+}
+static inline int trim_bin_str_value(const char** str)
+{
+    while(**str == ' ' || **str == '\r' || **str == '\t' || **str == '\n')
+        (*str)++;
+    int len = 0;
+    const char* s = *str;
+    while(*s && *s != ' ' && *s != '\r' && *s != '\t' && *s != '\n')
+    {
+        len++;
+        s++;
+    }
+    return len;
+}
+static inline bool hex2bytes(const char* str, int len, char* data)
+{
+    if(len % 2)
+    {
+        error("cannot convert odd len hex str: %s, len:%d to binary", str, len);
+        return false;
+    }
+    for(int i = 0; i < len; i+= 2)
+    {
+        int d = hex2byte(str[i]);
+        if(d < 0)
+        {
+            error("cannot convert hex: %s, len:%d to binary", str, len);
+            return false;
+        }
+        *data = (char)(d << 4);
+        d = hex2byte(str[i+1]);
+        if(d < 0)
+        {
+            error("cannot convert hex: %s, len:%d to binary", str, len);
+            return false;
+        }
+        *data++ |= (char)d;
+    }
+    return true;
+}
+static inline void reverse_bin(char *bin, int size)
+{
+    for(int i = 0; i < size /2; i++)
+    {
+        int b = bin[i];
+        bin[i] = bin[size - i - 1];
+        bin[size -i  - 1] = b;
+    }
+}
+////////////////////////////////////////////////////////////////////////////////////////////////////////
+int btif_config_save_file(const char* file_name)
+{
+    debug("in file name:%s", file_name);
+    XMLDocument xml;
+    XMLElement* root = xml.NewElement(BLUEDROID_ROOT);
+    xml.InsertFirstChild(root);
+    int ret = FALSE;
+    enum_user_data data;
+    memset(&data, 0, sizeof(data));
+    data.xml = &xml;
+    if(btif_config_enum(enum_config, &data))
+        ret = xml.SaveFile(file_name) == XML_SUCCESS;
+    return ret;
+}
+int btif_config_load_file(const char* file_name)
+{
+    //if(access(file_name, 0) != 0)
+    //    return XML_ERROR_FILE_NOT_FOUND;
+    XMLDocument xml;
+    int err = xml.LoadFile(file_name);
+    const XMLElement* root = xml.RootElement();
+    int ret = FALSE;
+    if(err == XML_SUCCESS && root && strcmp(root->Name(), BLUEDROID_ROOT) == 0)
+    {
+        const XMLElement* section;
+        for(section = root->FirstChildElement(); section; section = section->NextSiblingElement())
+        {
+            //debug("section tag:%s", section->Name());
+            if(validate_ele_name(section->Name()))
+            {
+                const char* section_name = section->Attribute(BLUEDROID_NAME_TAG);
+                if(section_name && *section_name)
+                    if(parse_sections(section_name, section))
+                        ret = TRUE;
+            }
+        }
+    }
+    return ret;
+}
+//////////////////////////////////////////////////////////////////////////////////////////////////////////
+static int parse_sections(const char* section_name, const XMLElement* section)
+{
+    const XMLElement* key;
+    //debug("in");
+    for(key = section->FirstChildElement(); key; key = key->NextSiblingElement())
+    {
+        //debug("key tag:%s", key->Name());
+        if(validate_ele_name(key->Name()))
+        {
+            const char* key_name = key->Attribute(BLUEDROID_NAME_TAG);
+            //debug("key name:%s", key_name);
+            if(key_name && *key_name)
+            {
+                const XMLElement* value;
+                for(value = key->FirstChildElement(); value; value = value->NextSiblingElement())
+                {
+                    const char* value_name = value->Attribute(BLUEDROID_NAME_TAG);
+                    const char* value_type = value->Attribute(BLUEDROID_VALUE_TYPE);
+                    //debug("value ele name:%s, section name:%s, key name:%s, value name:%s, value type:%s",
+                    //        value->Name(), section_name, key_name, value_name, value_type);
+                    int type = type_str2int(value_type);
+                    if(value_name && *value_name && type != BTIF_CFG_TYPE_INVALID)
+                    {
+                        const char* value_str = value->GetText() ? value->GetText() : "";
+                        //debug("value_name:%s, value_str:%s, value_type:%s, type:%x",
+                        //       value_name, value_str, value_type, type);
+                        if(type & BTIF_CFG_TYPE_STR)
+                            btif_config_set_str(section_name, key_name, value_name, value_str);
+                        else if(type & BTIF_CFG_TYPE_INT)
+                        {
+                            if(*value_str)
+                            {
+                                int v = atoi(value_str);
+                                btif_config_set_int(section_name, key_name, value_name, v);
+                            }
+                        }
+                        else if(type & BTIF_CFG_TYPE_BIN)
+                        {
+                            int len = trim_bin_str_value(&value_str);
+                            if(len > 0 && len % 2 == 0)
+                            {
+                                char *bin = (char*)alloca(len / 2);
+                                if(hex2bytes(value_str, len, bin))
+                                    btif_config_set(section_name, key_name, value_name, bin, len/2, BTIF_CFG_TYPE_BIN);
+                            }
+                        }
+                        else error("Unsupported value:%s, type:%s not loaded", value_name, value_type);
+                    }
+                }
+            }
+        }
+    }
+    //debug("out");
+    return TRUE;
+}
+static inline XMLElement* add_ele(XMLDocument* xml, XMLElement* p, int index,
+                                  const char* name_tag, const char* value_type = NULL)
+{
+    //debug("in, tag:%s", name_tag);
+    char ele_name[128] = {0};
+    create_ele_name(index, ele_name, sizeof(ele_name));
+    XMLElement* ele = xml->NewElement(ele_name);
+    //debug("ele name:%s, tag:%s, index:%d, value type:%s", ele_name, name_tag, index, value_type);
+    ele->SetAttribute(BLUEDROID_NAME_TAG, name_tag);
+    if(value_type && *value_type)
+        ele->SetAttribute(BLUEDROID_VALUE_TYPE, value_type);
+    p->InsertEndChild(ele);
+    //debug("out, tag:%s", name_tag);
+    return ele;
+}
+static void enum_config(void* user_data, const char* section_name, const char* key_name, const char* value_name,
+                        const char*  value, int bytes, int type)
+{
+    enum_user_data& d = *(enum_user_data*)user_data;
+    //debug("in, key:%s, value:%s", key_name, value_name);
+    //debug("section name:%s, key name:%s, value name:%s, value type:%s",
+    //                      section_name, key_name, value_name, type_int2str(type));
+    if(type & BTIF_CFG_TYPE_VOLATILE)
+        return; //skip any volatile value
+    if(d.sn != section_name)
+    {
+        d.sn = section_name;
+        d.se = add_ele(d.xml, d.xml->RootElement(), ++d.si, section_name);
+        d.ki = 0;
+    }
+    if(d.kn != key_name)
+    {
+        d.kn = key_name;
+        d.ke = add_ele(d.xml, d.se, ++d.ki, key_name);
+        d.vi = 0;
+    }
+    if(d.vn != value_name)
+    {
+        if(type & BTIF_CFG_TYPE_STR)
+        {
+            d.vn = value_name;
+            d.ve = add_ele(d.xml, d.ke, ++d.vi, value_name, type_int2str(type));
+            d.ve->InsertFirstChild(d.xml->NewText(value));
+        }
+        else if(type & BTIF_CFG_TYPE_INT)
+        {
+            d.vn = value_name;
+            d.ve = add_ele(d.xml, d.ke, ++d.vi, value_name, type_int2str(type));
+            char value_str[64] = {0};
+            snprintf(value_str, sizeof(value_str), "%d", *(int*)value);
+            d.ve->InsertFirstChild(d.xml->NewText(value_str));
+        }
+        else if(type & BTIF_CFG_TYPE_BIN)
+        {
+            d.vn = value_name;
+            d.ve = add_ele(d.xml, d.ke, ++d.vi, value_name, type_int2str(type));
+            char* value_str = (char*)alloca(bytes*2 + 1);
+            bytes2hex(value, bytes, value_str);
+            d.ve->InsertFirstChild(d.xml->NewText(value_str));
+        }
+        else error("unsupported config value name:%s, type:%s not saved", d.vn, type_int2str(type));
+    }
+    //debug("out, key:%s, value:%s", key_name, value_name);
+}
+
+static int type_str2int(const char* type)
+{
+    if(strcmp(type, "int") == 0)
+        return BTIF_CFG_TYPE_INT;
+    if(strcmp(type, "binary") == 0)
+        return BTIF_CFG_TYPE_BIN;
+    if(type == 0 || *type == 0 || strcmp(type, "string") == 0)
+        return  BTIF_CFG_TYPE_STR;
+    error("unknown value type:%s", type);
+    return BTIF_CFG_TYPE_INVALID;
+}
+static const char* type_int2str(int type)
+{
+    switch(type)
+    {
+        case BTIF_CFG_TYPE_INT:
+            return "int";
+        case BTIF_CFG_TYPE_BIN:
+            return "binary";
+        case BTIF_CFG_TYPE_STR:
+            return "string";
+        default:
+            error("unknown type:%d", type);
+            break;
+    }
+    return NULL;
+}
+
+static inline void create_ele_name(int index, char* element, int len)
+{
+    snprintf(element, len, "N%d", index);
+}
+static inline int validate_ele_name(const char* key)
+{
+    //must be 'N' followed with numbers
+    if(key && *key == 'N' && *++key)
+    {
+        while(*key)
+        {
+            if(*key < '0' || *key > '9')
+                return FALSE;
+            ++key;
+        }
+        return TRUE;
+    }
+    return FALSE;
+}
+static int open_file_map(const char *pathname, const char**map, int* size)
+{
+    struct stat st;
+    st.st_size = 0;
+    int fd;
+    //debug("in");
+    if((fd = open(pathname, O_RDONLY)) >= 0)
+    {
+        //debug("fd:%d", fd);
+        if(fstat(fd, &st) == 0 && st.st_size)
+        {
+            *size = st.st_size;
+            *map = (const char*)mmap(NULL, *size, PROT_READ, MAP_SHARED, fd, 0);
+            if(*map && *map != MAP_FAILED)
+            {
+                //debug("out map:%p, size:%d", *map, *size);
+                return fd;
+            }
+        }
+        close(fd);
+    }
+    //debug("out, failed");
+    return -1;
+}
+static void close_file_map(int fd, const char* map, int size)
+{
+    munmap((void*)map, size);
+    close(fd);
+}
+static int read_file_line(const char* map, int start_pos, int size, int* line_size)
+{
+    *line_size = 0;
+    //debug("in, start pos:%d, size:%d", start_pos, size);
+    int i;
+    for(i = start_pos; i < size; i++)
+    {
+         ++*line_size;
+        if(map[i] == '\r' || map[i] == '\n')
+            break;
+    }
+    //debug("out, ret:%d, start pos:%d, size:%d, line_size:%d", i, start_pos, size, *line_size);
+    return i + 1;
+}
+static const char* find_value_line(const char* map, int size, const char *key, int* value_size)
+{
+    int key_len = strlen(key);
+    int i;
+    for(i = 0; i < size; i++)
+    {
+        if(map[i] == *key)
+        {
+            if(i + key_len + 1 > size)
+                return NULL;
+            if(memcmp(map + i, key, key_len) == 0)
+            {
+                read_file_line(map, i + key_len + 1, size, value_size);
+                if(*value_size)
+                    return map + i + key_len + 1;
+                break;
+            }
+        }
+    }
+    return NULL;
+}
+static int read_line_word(const char* line, int start_pos, int line_size, char* word, int *word_size, bool lower_case = false)
+{
+    int i;
+    //skip space
+    //debug("in, line start_pos:%d, line_size:%d", start_pos, line_size);
+    for(i = start_pos; i < line_size; i++)
+    {
+        //debug("skip space loop, line[%d]:%c", i, line[i]);
+        if(line[i] != ' ' && line[i] != '\t' && line[i] != '\r' && line[i] !='\n')
+            break;
+    }
+    *word_size = 0;
+    for(; i < line_size; i++)
+    {
+        //debug("add word loop, line[%d]:%c", i, line[i]);
+        if(line[i] != ' ' && line[i] != '\t' && line[i] != '\r' && line[i] !='\n')
+        {
+            ++*word_size;
+            if(lower_case && 'A' <= line[i] && line[i] <= 'Z')
+                *word++ = 'a' - 'A' + line[i];
+            else
+                *word++ = line[i];
+        }
+        else break;
+    }
+    *word = 0;
+    //debug("out, ret:%d, word:%s, word_size:%d, line start_pos:%d, line_size:%d",
+    //            i, word, *word_size, start_pos, line_size);
+    return i;
+}
+static int is_valid_bd_addr(const char* addr)
+{
+    int len = strlen(addr);
+    //debug("addr: %s, len:%d", addr, len);
+    return len == 17 && addr[2] == ':' && addr[5] == ':' && addr[14] == ':';
+}
+static int load_bluez_cfg_value(const char* adapter_path, const char* file_name)
+{
+    //debug("in");
+
+    const char* map = NULL;
+    int size = 0;
+    int ret = FALSE;
+    char path[256];
+    snprintf(path, sizeof(path), "%s/%s", adapter_path, file_name);
+    int fd = open_file_map(path, &map, &size);
+    //debug("in, path:%s, fd:%d, size:%d", path, fd, size);
+    if(fd < 0 || size == 0)
+    {
+        error("open_file_map fail, fd:%d, path:%s, size:%d", fd, path, size);
+        //debug("out");
+        return FALSE;
+    }
+    //get local bt device name from bluez config
+    int line_size = 0;
+    const char *value_line = find_value_line(map, size, "name", &line_size);
+    if(value_line && line_size > 0)
+    {
+        char value[line_size + 1];
+        memcpy(value, value_line, line_size);
+        value[line_size] = 0;
+        //debug("import local bt dev names:%s", value);
+        btif_config_set_str("Local", "Adapter", "Name", value);
+        ret = TRUE;
+    }
+
+    close_file_map(fd, map, size);
+    //debug("out, ret:%d", ret);
+    return ret;
+}
+
+int load_bluez_adapter_info(char* adapter_path, int size)
+{
+    struct dirent *dptr;
+    DIR *dirp;
+    int ret = FALSE;
+    if((dirp = opendir(BLUEZ_PATH)) != NULL)
+    {
+        while((dptr = readdir(dirp)) != NULL)
+        {
+            //debug("readdir: %s",dptr->d_name);
+            if(is_valid_bd_addr(dptr->d_name))
+            {
+                snprintf(adapter_path, size, "%s%s", BLUEZ_PATH, dptr->d_name);
+                btif_config_set_str("Local", "Adapter", "Address", dptr->d_name);
+                load_bluez_cfg_value(adapter_path, BLUEZ_CONFIG);
+                ret = TRUE;
+                break;
+            }
+        }
+        closedir(dirp);
+    }
+    return ret;
+}
+static inline void upcase_addr(const char* laddr, char* uaddr, int size)
+{
+    int i;
+    for(i = 0; i < size && laddr[i]; i++)
+        uaddr[i] = ('a' <= laddr[i] && laddr[i] <= 'z') ?
+                        laddr[i] - ('a' - 'A') : laddr[i];
+    uaddr[i] = 0;
+}
+static int load_bluez_dev_value(const char* adapter_path, const char* bd_addr,
+                                const char* file_name, const char* cfg_value_name, int type)
+{
+    //debug("in");
+    char addr[32];
+    upcase_addr(bd_addr, addr, sizeof(addr));
+
+    const char* map = NULL;
+    int size = 0;
+    int ret = FALSE;
+    char path[256];
+    snprintf(path, sizeof(path), "%s/%s", adapter_path, file_name);
+    int fd = open_file_map(path, &map, &size);
+    //debug("in, path:%s, addr:%s, fd:%d, size:%d", path, addr, fd, size);
+    if(fd < 0 || size == 0)
+    {
+        error("open_file_map fail, fd:%d, path:%s, size:%d", fd, path, size);
+        //debug("out");
+        return FALSE;
+    }
+    int line_size = 0;
+    const char *value_line = find_value_line(map, size, addr, &line_size);
+    if(value_line && line_size)
+    {
+        char line[line_size + 1];
+        memcpy(line, value_line, line_size);
+        line[line_size] = 0;
+        //debug("addr:%s, Names:%s", bd_addr, line);
+        if(type == BTIF_CFG_TYPE_STR)
+            btif_config_set_str("Remote", bd_addr, cfg_value_name, line);
+        else if(type == BTIF_CFG_TYPE_INT)
+        {
+            int v = strtol(line, NULL, 16);
+            //filter out unspported devices by its class
+            if(strcmp(file_name, BLUEZ_CLASSES) == 0)
+            {
+                switch((v & 0x1f00) >> 8)
+                {
+                    case 0x5: //hid device
+                        error("skip paired hid devices");
+                        close_file_map(fd, map, size);
+                        return FALSE;
+                }
+            }
+            btif_config_set_int("Remote", bd_addr, cfg_value_name, v);
+        }
+        ret = TRUE;
+    }
+    close_file_map(fd, map, size);
+    //debug("out, ret:%d", ret);
+    return ret;
+}
+static inline int bz2bd_linkkeytype(int type)
+{
+#if 1
+    return type;
+#else
+    int table[5] = {0, 0, 0, 0, 0};
+    if(0 <= type && type < (int)(sizeof(table)/sizeof(int)))
+        return table[type];
+    return 0;
+#endif
+}
+int load_bluez_linkkeys(const char* adapter_path)
+{
+    const char* map = NULL;
+    int size = 0;
+    int ret = FALSE;
+    char path[256];
+    //debug("in");
+    snprintf(path, sizeof(path), "%s/%s", adapter_path, BLUEZ_LINKKEY);
+    int fd = open_file_map(path, &map, &size);
+    if(fd < 0 || size == 0)
+    {
+        error("open_file_map fail, fd:%d, path:%s, size:%d", fd, path, size);
+        //debug("out");
+        return FALSE;
+    }
+    int pos = 0;
+    //debug("path:%s, size:%d", path, size);
+    while(pos < size)
+    {
+        int line_size = 0;
+        int next_pos = read_file_line(map, pos, size, &line_size);
+        //debug("pos:%d, next_pos:%d, size:%d, line_size:%d", pos, next_pos, size, line_size);
+        if(line_size)
+        {
+            const char* line = map + pos;
+            char addr[line_size + 1];
+            int word_pos = 0;
+            int addr_size = 0;
+            word_pos = read_line_word(line, word_pos, line_size, addr, &addr_size, true);
+            //debug("read_line_word addr:%s, addr_size:%d", addr, addr_size);
+            if(*addr)
+            {
+                char value[line_size + 1];
+                int value_size = 0;
+                //read link key
+                word_pos = read_line_word(line, word_pos, line_size, value, &value_size);
+                //debug("read_line_word linkkey:%s, size:%d", value, value_size);
+                if(*value)
+                {
+                    int linkkey_size = value_size / 2;
+                    char linkkey[linkkey_size];
+                    if(hex2bytes(value, value_size, linkkey))
+                    { //read link key type
+                        //bluez save the linkkey in reversed order
+                        reverse_bin(linkkey, linkkey_size);
+                        word_pos = read_line_word(line, word_pos,
+                                                    line_size, value, &value_size);
+                        if(*value)
+                        {
+                            if(load_bluez_dev_value(adapter_path, addr,
+                                                BLUEZ_CLASSES, "DevClass", BTIF_CFG_TYPE_INT) &&
+                               load_bluez_dev_value(adapter_path, addr,
+                                                BLUEZ_NAMES, "Name", BTIF_CFG_TYPE_STR) &&
+                               load_bluez_dev_value(adapter_path, addr,
+                                                BLUEZ_TYPES, "DevType", BTIF_CFG_TYPE_INT) &&
+                               load_bluez_dev_value(adapter_path, addr,
+                                                BLUEZ_PROFILES, "Service", BTIF_CFG_TYPE_STR))
+                            {
+                                load_bluez_dev_value(adapter_path, addr,
+                                                BLUEZ_ALIASES, "Aliase", BTIF_CFG_TYPE_STR);
+                                int key_type = bz2bd_linkkeytype(atoi(value));
+
+                                //read pin len
+                                word_pos = read_line_word(line, word_pos, line_size, value, &value_size);
+                                if(*value)
+                                {
+                                    int pin_len = atoi(value);
+                                    ret = TRUE;
+                                    btif_config_set("Remote", addr, "LinkKey", linkkey,
+                                                                    linkkey_size, BTIF_CFG_TYPE_BIN);
+                                    //dump_bin("import bluez linkkey", linkkey, linkkey_size);
+                                    btif_config_set_int("Remote", addr, "LinkKeyType", key_type);
+                                    btif_config_set_int("Remote", addr, "PinLength", pin_len);
+                                }
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        //debug("pos:%d, next_pos:%d, size:%d, line_size:%d", pos, next_pos, size, line_size);
+        pos = next_pos;
+    }
+    close_file_map(fd, map, size);
+    //debug("out, ret:%d", ret);
+    return ret;
+}
+
diff --git a/btif/src/btif_core.c b/btif/src/btif_core.c
new file mode 100755
index 0000000..62339a9
--- /dev/null
+++ b/btif/src/btif_core.c
@@ -0,0 +1,1431 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_core.c
+ *
+ *  Description:   Contains core functionality related to interfacing between
+ *                 Bluetooth HAL and BTE core stack.
+ *
+ ***********************************************************************************/
+
+#include <stdlib.h>
+#include <hardware/bluetooth.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <dirent.h>
+#include <ctype.h>
+#include <cutils/properties.h>
+
+#define LOG_TAG "BTIF_CORE"
+#include "btif_api.h"
+#include "bta_api.h"
+#include "gki.h"
+#include "btu.h"
+#include "bte.h"
+#include "bd.h"
+#include "btif_av.h"
+#include "btif_storage.h"
+#include "btif_util.h"
+#include "btif_sock.h"
+#include "btif_pan.h"
+#include "btif_profile_queue.h"
+#include "btif_config.h"
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+
+#ifndef BTIF_TASK_STACK_SIZE
+#define BTIF_TASK_STACK_SIZE       0x2000         /* In bytes */
+#endif
+
+#ifndef BTE_DID_CONF_FILE
+#define BTE_DID_CONF_FILE "/etc/bluetooth/bt_did.conf"
+#endif
+
+#define BTIF_TASK_STR        ((INT8 *) "BTIF")
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+/* These type definitions are used when passing data from the HAL to BTIF context
+*  in the downstream path for the adapter and remote_device property APIs */
+
+typedef struct {
+  bt_bdaddr_t bd_addr;
+  bt_property_type_t type;
+} btif_storage_read_t;
+
+typedef struct {
+  bt_bdaddr_t bd_addr;
+  bt_property_t prop;
+} btif_storage_write_t;
+
+typedef union {
+  btif_storage_read_t read_req;
+  btif_storage_write_t write_req;
+} btif_storage_req_t;
+
+typedef enum {
+    BTIF_CORE_STATE_DISABLED = 0,
+    BTIF_CORE_STATE_ENABLING,
+    BTIF_CORE_STATE_ENABLED,
+    BTIF_CORE_STATE_DISABLING
+} btif_core_state_t;
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+
+bt_bdaddr_t btif_local_bd_addr;
+
+static UINT32 btif_task_stack[(BTIF_TASK_STACK_SIZE + 3) / 4];
+
+/* holds main adapter state */
+static btif_core_state_t btif_core_state = BTIF_CORE_STATE_DISABLED;
+
+static int btif_shutdown_pending = 0;
+static tBTA_SERVICE_MASK btif_enabled_services = 0;
+
+/*
+* This variable should be set to 1, if the Bluedroid+BTIF libraries are to
+* function in DUT mode.
+*
+* To set this, the btif_init_bluetooth needs to be called with argument as 1
+*/
+static UINT8 btif_dut_mode = 0;
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+static bt_status_t btif_associate_evt(void);
+static bt_status_t btif_disassociate_evt(void);
+
+/* sends message to btif task */
+static void btif_sendmsg(void *p_msg);
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+extern void bte_load_did_conf(const char *p_path);
+
+/** TODO: Move these to _common.h */
+void bte_main_boot_entry(void);
+void bte_main_enable(uint8_t *local_addr);
+void bte_main_disable(void);
+void bte_main_shutdown(void);
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+void bte_main_enable_lpm(BOOLEAN enable);
+#endif
+void bte_main_postload_cfg(void);
+void btif_dm_execute_service_request(UINT16 event, char *p_param);
+#ifdef BTIF_DM_OOB_TEST
+void btif_dm_load_local_oob(void);
+#endif
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+
+/*****************************************************************************
+**   Context switching functions
+*****************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         btif_context_switched
+**
+** Description      Callback used to execute transferred context callback
+**
+**                  p_msg : message to be executed in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void btif_context_switched(void *p_msg)
+{
+    tBTIF_CONTEXT_SWITCH_CBACK *p;
+
+    BTIF_TRACE_VERBOSE0("btif_context_switched");
+
+    p = (tBTIF_CONTEXT_SWITCH_CBACK *) p_msg;
+
+    /* each callback knows how to parse the data */
+    if (p->p_cb)
+        p->p_cb(p->event, p->p_param);
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_transfer_context
+**
+** Description      This function switches context to btif task
+**
+**                  p_cback   : callback used to process message in btif context
+**                  event     : event id of message
+**                  p_params  : parameter area passed to callback (copied)
+**                  param_len : length of parameter area
+**                  p_copy_cback : If set this function will be invoked for deep copy
+**
+** Returns          void
+**
+*******************************************************************************/
+
+bt_status_t btif_transfer_context (tBTIF_CBACK *p_cback, UINT16 event, char* p_params, int param_len, tBTIF_COPY_CBACK *p_copy_cback)
+{
+    tBTIF_CONTEXT_SWITCH_CBACK *p_msg;
+
+    BTIF_TRACE_VERBOSE2("btif_transfer_context event %d, len %d", event, param_len);
+
+    /* allocate and send message that will be executed in btif context */
+    if ((p_msg = (tBTIF_CONTEXT_SWITCH_CBACK *) GKI_getbuf(sizeof(tBTIF_CONTEXT_SWITCH_CBACK) + param_len)) != NULL)
+    {
+        p_msg->hdr.event = BT_EVT_CONTEXT_SWITCH_EVT; /* internal event */
+        p_msg->p_cb = p_cback;
+
+        p_msg->event = event;                         /* callback event */
+
+        /* check if caller has provided a copy callback to do the deep copy */
+        if (p_copy_cback)
+        {
+            p_copy_cback(event, p_msg->p_param, p_params);
+        }
+        else if (p_params)
+        {
+            memcpy(p_msg->p_param, p_params, param_len);  /* callback parameter data */
+        }
+
+        btif_sendmsg(p_msg);
+        return BT_STATUS_SUCCESS;
+    }
+    else
+    {
+        /* let caller deal with a failed allocation */
+        return BT_STATUS_NOMEM;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_is_dut_mode
+**
+** Description      checks if BTIF is currently in DUT mode
+**
+** Returns          1 if test mode, otherwize 0
+**
+*******************************************************************************/
+
+UINT8 btif_is_dut_mode(void)
+{
+    return (btif_dut_mode == 1);
+}
+
+/*******************************************************************************
+**
+** Function         btif_is_enabled
+**
+** Description      checks if main adapter is fully enabled
+**
+** Returns          1 if fully enabled, otherwize 0
+**
+*******************************************************************************/
+
+int btif_is_enabled(void)
+{
+    return ((!btif_is_dut_mode()) && (btif_core_state == BTIF_CORE_STATE_ENABLED));
+}
+
+/*******************************************************************************
+**
+** Function         btif_task
+**
+** Description      BTIF task handler managing all messages being passed
+**                  Bluetooth HAL and BTA.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void btif_task(UINT32 params)
+{
+    UINT16   event;
+    BT_HDR   *p_msg;
+
+    BTIF_TRACE_DEBUG0("btif task starting");
+
+    btif_associate_evt();
+
+    for(;;)
+    {
+        /* wait for specified events */
+        event = GKI_wait(0xFFFF, 0);
+
+        /*
+         * Wait for the trigger to init chip and stack. This trigger will
+         * be received by btu_task once the UART is opened and ready
+         */
+        if (event == BT_EVT_TRIGGER_STACK_INIT)
+        {
+            BTIF_TRACE_DEBUG0("btif_task: received trigger stack init event");
+            BTA_EnableBluetooth(bte_dm_evt);
+        }
+
+        if (event & EVENT_MASK(GKI_SHUTDOWN_EVT))
+            break;
+
+        if(event & TASK_MBOX_1_EVT_MASK)
+        {
+            while((p_msg = GKI_read_mbox(BTU_BTIF_MBOX)) != NULL)
+            {
+                BTIF_TRACE_VERBOSE1("btif task fetched event %x", p_msg->event);
+
+                switch (p_msg->event)
+                {
+                    case BT_EVT_CONTEXT_SWITCH_EVT:
+                        btif_context_switched(p_msg);
+                        break;
+                    default:
+                        BTIF_TRACE_ERROR1("unhandled btif event (%d)", p_msg->event & BT_EVT_MASK);
+                        break;
+                }
+
+                GKI_freebuf(p_msg);
+            }
+        }
+    }
+
+    btif_disassociate_evt();
+
+    BTIF_TRACE_DEBUG0("btif task exiting");
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_sendmsg
+**
+** Description      Sends msg to BTIF task
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void btif_sendmsg(void *p_msg)
+{
+    GKI_send_msg(BTIF_TASK, BTU_BTIF_MBOX, p_msg);
+}
+
+static void btif_fetch_local_bdaddr(bt_bdaddr_t *local_addr)
+{
+    char val[256];
+    uint8_t valid_bda = FALSE;
+    int val_size = 0;
+    const uint8_t null_bdaddr[BD_ADDR_LEN] = {0,0,0,0,0,0};
+
+    /* Get local bdaddr storage path from property */
+    if (property_get(PROPERTY_BT_BDADDR_PATH, val, NULL))
+    {
+        int addr_fd;
+
+        BTIF_TRACE_DEBUG1("local bdaddr is stored in %s", val);
+
+        if ((addr_fd = open(val, O_RDONLY)) != -1)
+        {
+            memset(val, 0, sizeof(val));
+            read(addr_fd, val, FACTORY_BT_BDADDR_STORAGE_LEN);
+            str2bd(val, local_addr);
+            /* If this is not a reserved/special bda, then use it */
+            if (memcmp(local_addr->address, null_bdaddr, BD_ADDR_LEN) != 0)
+            {
+                valid_bda = TRUE;
+                BTIF_TRACE_DEBUG6("Got Factory BDA %02X:%02X:%02X:%02X:%02X:%02X",
+                    local_addr->address[0], local_addr->address[1], local_addr->address[2],
+                    local_addr->address[3], local_addr->address[4], local_addr->address[5]);
+            }
+
+            close(addr_fd);
+        }
+    }
+
+    if(!valid_bda)
+    {
+        val_size = sizeof(val);
+        if(btif_config_get_str("Local", "Adapter", "Address", val, &val_size))
+        {
+            str2bd(val, local_addr);
+            BTIF_TRACE_DEBUG1("local bdaddr from bt_config.xml is  %s", val);
+            return;
+        }
+     }
+
+    /* No factory BDADDR found. Look for previously generated random BDA */
+    if ((!valid_bda) && \
+        (property_get(PERSIST_BDADDR_PROPERTY, val, NULL)))
+    {
+        str2bd(val, local_addr);
+        valid_bda = TRUE;
+        BTIF_TRACE_DEBUG6("Got prior random BDA %02X:%02X:%02X:%02X:%02X:%02X",
+            local_addr->address[0], local_addr->address[1], local_addr->address[2],
+            local_addr->address[3], local_addr->address[4], local_addr->address[5]);
+    }
+
+    /* Generate new BDA if necessary */
+    if (!valid_bda)
+    {
+        bdstr_t bdstr;
+        /* Seed the random number generator */
+        srand((unsigned int) (time(0)));
+
+        /* No autogen BDA. Generate one now. */
+        local_addr->address[0] = 0x22;
+        local_addr->address[1] = 0x22;
+        local_addr->address[2] = (uint8_t) ((rand() >> 8) & 0xFF);
+        local_addr->address[3] = (uint8_t) ((rand() >> 8) & 0xFF);
+        local_addr->address[4] = (uint8_t) ((rand() >> 8) & 0xFF);
+        local_addr->address[5] = (uint8_t) ((rand() >> 8) & 0xFF);
+
+        /* Convert to ascii, and store as a persistent property */
+        bd2str(local_addr, &bdstr);
+
+        BTIF_TRACE_DEBUG2("No preset BDA. Generating BDA: %s for prop %s",
+             (char*)bdstr, PERSIST_BDADDR_PROPERTY);
+
+        if (property_set(PERSIST_BDADDR_PROPERTY, (char*)bdstr) < 0)
+            BTIF_TRACE_ERROR1("Failed to set random BDA in prop %s",PERSIST_BDADDR_PROPERTY);
+    }
+
+    //save the bd address to config file
+    bdstr_t bdstr;
+    bd2str(local_addr, &bdstr);
+    val_size = sizeof(val);
+    if (btif_config_get_str("Local", "Adapter", "Address", val, &val_size))
+    {
+        if (strcmp(bdstr, val) ==0)
+        {
+            // BDA is already present in the config file.
+            return;
+        }
+    }
+    btif_config_set_str("Local", "Adapter", "Address", bdstr);
+    btif_config_save();
+}
+
+/*****************************************************************************
+**
+**   btif core api functions
+**
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_init_bluetooth
+**
+** Description      Creates BTIF task and prepares BT scheduler for startup
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_init_bluetooth()
+{
+    UINT8 status;
+    btif_config_init();
+    bte_main_boot_entry();
+
+    /* As part of the init, fetch the local BD ADDR */
+    memset(&btif_local_bd_addr, 0, sizeof(bt_bdaddr_t));
+    btif_fetch_local_bdaddr(&btif_local_bd_addr);
+
+    /* start btif task */
+    status = GKI_create_task(btif_task, BTIF_TASK, BTIF_TASK_STR,
+                (UINT16 *) ((UINT8 *)btif_task_stack + BTIF_TASK_STACK_SIZE),
+                sizeof(btif_task_stack));
+
+    if (status != GKI_SUCCESS)
+        return BT_STATUS_FAIL;
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_associate_evt
+**
+** Description      Event indicating btif_task is up
+**                  Attach btif_task to JVM
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static bt_status_t btif_associate_evt(void)
+{
+    BTIF_TRACE_DEBUG1("%s: notify ASSOCIATE_JVM", __FUNCTION__);
+    HAL_CBACK(bt_hal_cbacks, thread_evt_cb, ASSOCIATE_JVM);
+
+    return BT_STATUS_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_enable_bluetooth
+**
+** Description      Performs chip power on and kickstarts OS scheduler
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_enable_bluetooth(void)
+{
+    BTIF_TRACE_DEBUG0("BTIF ENABLE BLUETOOTH");
+
+    if (btif_core_state != BTIF_CORE_STATE_DISABLED)
+    {
+        ALOGD("not disabled\n");
+        return BT_STATUS_DONE;
+    }
+
+    btif_core_state = BTIF_CORE_STATE_ENABLING;
+
+    /* Create the GKI tasks and run them */
+    bte_main_enable(btif_local_bd_addr.address);
+
+    return BT_STATUS_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_enable_bluetooth_evt
+**
+** Description      Event indicating bluetooth enable is completed
+**                  Notifies HAL user with updated adapter state
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void btif_enable_bluetooth_evt(tBTA_STATUS status, BD_ADDR local_bd)
+{
+    bt_bdaddr_t bd_addr;
+    bdstr_t bdstr;
+
+    bdcpy(bd_addr.address, local_bd);
+    BTIF_TRACE_DEBUG3("%s: status %d, local bd [%s]", __FUNCTION__, status,
+                                                     bd2str(&bd_addr, &bdstr));
+
+    if (bdcmp(btif_local_bd_addr.address,local_bd))
+    {
+        bdstr_t buf;
+        bt_property_t prop;
+
+        /**
+         * The Controller's BDADDR does not match to the BTIF's initial BDADDR!
+         * This could be because the factory BDADDR was stored separatley in
+         * the Controller's non-volatile memory rather than in device's file
+         * system.
+         **/
+        BTIF_TRACE_WARNING0("***********************************************");
+        BTIF_TRACE_WARNING6("BTIF init BDA was %02X:%02X:%02X:%02X:%02X:%02X",
+            btif_local_bd_addr.address[0], btif_local_bd_addr.address[1],
+            btif_local_bd_addr.address[2], btif_local_bd_addr.address[3],
+            btif_local_bd_addr.address[4], btif_local_bd_addr.address[5]);
+        BTIF_TRACE_WARNING6("Controller BDA is %02X:%02X:%02X:%02X:%02X:%02X",
+            local_bd[0], local_bd[1], local_bd[2],
+            local_bd[3], local_bd[4], local_bd[5]);
+        BTIF_TRACE_WARNING0("***********************************************");
+
+        bdcpy(btif_local_bd_addr.address, local_bd);
+
+        //save the bd address to config file
+        bd2str(&btif_local_bd_addr, &buf);
+        btif_config_set_str("Local", "Adapter", "Address", buf);
+        btif_config_save();
+
+        //fire HAL callback for property change
+        memcpy(buf, &btif_local_bd_addr, sizeof(bt_bdaddr_t));
+        prop.type = BT_PROPERTY_BDADDR;
+        prop.val = (void*)buf;
+        prop.len = sizeof(bt_bdaddr_t);
+        HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, BT_STATUS_SUCCESS, 1, &prop);
+    }
+
+    bte_main_postload_cfg();
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+    bte_main_enable_lpm(TRUE);
+#endif
+    /* add passing up bd address as well ? */
+
+    /* callback to HAL */
+    if (status == BTA_SUCCESS)
+    {
+        /* initialize a2dp service */
+        btif_av_init();
+
+        /* init rfcomm & l2cap api */
+        btif_sock_init();
+
+        /* init pan */
+        btif_pan_init();
+
+        /* load did configuration */
+        bte_load_did_conf(BTE_DID_CONF_FILE);
+
+#ifdef BTIF_DM_OOB_TEST
+        btif_dm_load_local_oob();
+#endif
+        /* now fully enabled, update state */
+        btif_core_state = BTIF_CORE_STATE_ENABLED;
+
+        HAL_CBACK(bt_hal_cbacks, adapter_state_changed_cb, BT_STATE_ON);
+    }
+    else
+    {
+        /* cleanup rfcomm & l2cap api */
+        btif_sock_cleanup();
+
+        btif_pan_cleanup();
+
+        /* we failed to enable, reset state */
+        btif_core_state = BTIF_CORE_STATE_DISABLED;
+
+        HAL_CBACK(bt_hal_cbacks, adapter_state_changed_cb, BT_STATE_OFF);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_disable_bluetooth
+**
+** Description      Inititates shutdown of Bluetooth system.
+**                  Any active links will be dropped and device entering
+**                  non connectable/discoverable mode
+**
+** Returns          void
+**
+*******************************************************************************/
+bt_status_t btif_disable_bluetooth(void)
+{
+    tBTA_STATUS status;
+
+    if (!btif_is_enabled())
+    {
+        BTIF_TRACE_ERROR0("btif_disable_bluetooth : not yet enabled");
+        return BT_STATUS_NOT_READY;
+    }
+
+    BTIF_TRACE_DEBUG0("BTIF DISABLE BLUETOOTH");
+
+    btif_dm_on_disable();
+    btif_core_state = BTIF_CORE_STATE_DISABLING;
+
+    /* cleanup rfcomm & l2cap api */
+    btif_sock_cleanup();
+
+    btif_pan_cleanup();
+
+    status = BTA_DisableBluetooth();
+
+    btif_config_flush();
+
+    if (status != BTA_SUCCESS)
+    {
+        BTIF_TRACE_ERROR1("disable bt failed (%d)", status);
+
+        /* reset the original state to allow attempting disable again */
+        btif_core_state = BTIF_CORE_STATE_ENABLED;
+
+        return BT_STATUS_FAIL;
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_disable_bluetooth_evt
+**
+** Description      Event notifying BT disable is now complete.
+**                  Terminates main stack tasks and notifies HAL
+**                  user with updated BT state.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void btif_disable_bluetooth_evt(void)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+    bte_main_enable_lpm(FALSE);
+#endif
+
+    bte_main_disable();
+
+    /* update local state */
+    btif_core_state = BTIF_CORE_STATE_DISABLED;
+
+    /* callback to HAL */
+    HAL_CBACK(bt_hal_cbacks, adapter_state_changed_cb, BT_STATE_OFF);
+
+    if (btif_shutdown_pending)
+    {
+        BTIF_TRACE_DEBUG1("%s: calling btif_shutdown_bluetooth", __FUNCTION__);
+        btif_shutdown_bluetooth();
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_shutdown_bluetooth
+**
+** Description      Finalizes BT scheduler shutdown and terminates BTIF
+**                  task.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+bt_status_t btif_shutdown_bluetooth(void)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_is_enabled())
+    {
+        BTIF_TRACE_WARNING0("shutdown while still enabled, initiate disable");
+
+        /* shutdown called prior to disabling, initiate disable */
+        btif_disable_bluetooth();
+        btif_shutdown_pending = 1;
+        return BT_STATUS_NOT_READY;
+    }
+
+    btif_shutdown_pending = 0;
+
+    GKI_destroy_task(BTIF_TASK);
+    btif_queue_release();
+    bte_main_shutdown();
+
+    btif_dut_mode = 0;
+
+    BTIF_TRACE_DEBUG1("%s done", __FUNCTION__);
+
+    return BT_STATUS_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_disassociate_evt
+**
+** Description      Event indicating btif_task is going down
+**                  Detach btif_task to JVM
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static bt_status_t btif_disassociate_evt(void)
+{
+    BTIF_TRACE_DEBUG1("%s: notify DISASSOCIATE_JVM", __FUNCTION__);
+
+    HAL_CBACK(bt_hal_cbacks, thread_evt_cb, DISASSOCIATE_JVM);
+
+    /* shutdown complete, all events notified and we reset HAL callbacks */
+    bt_hal_cbacks = NULL;
+
+    return BT_STATUS_SUCCESS;
+}
+
+/****************************************************************************
+**
+**   BTIF Test Mode APIs
+**
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         btif_dut_mode_cback
+**
+** Description     Callback invoked on completion of vendor specific test mode command
+**
+** Returns          None
+**
+*******************************************************************************/
+static void btif_dut_mode_cback( tBTM_VSC_CMPL *p )
+{
+    /* For now nothing to be done. */
+}
+
+/*******************************************************************************
+**
+** Function         btif_dut_mode_configure
+**
+** Description      Configure Test Mode - 'enable' to 1 puts the device in test mode and 0 exits
+**                       test mode
+**
+** Returns          BT_STATUS_SUCCESS on success
+**
+*******************************************************************************/
+bt_status_t btif_dut_mode_configure(uint8_t enable)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_core_state != BTIF_CORE_STATE_ENABLED) {
+        BTIF_TRACE_ERROR0("btif_dut_mode_configure : Bluetooth not enabled");
+        return BT_STATUS_NOT_READY;
+    }
+
+    btif_dut_mode = enable;
+    if (enable == 1) {
+        BTA_EnableTestMode();
+    } else {
+        BTA_DisableTestMode();
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dut_mode_send
+**
+** Description     Sends a HCI Vendor specific command to the controller
+**
+** Returns          BT_STATUS_SUCCESS on success
+**
+*******************************************************************************/
+bt_status_t btif_dut_mode_send(uint16_t opcode, uint8_t *buf, uint8_t len)
+{
+    /* TODO: Check that opcode is a vendor command group */
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (!btif_is_dut_mode()) {
+         BTIF_TRACE_ERROR0("Bluedroid HAL needs to be init with test_mode set to 1.");
+         return BT_STATUS_FAIL;
+    }
+    BTM_VendorSpecificCommand(opcode, len, buf, btif_dut_mode_cback);
+    return BT_STATUS_SUCCESS;
+}
+/*****************************************************************************
+**
+**   btif api adapter property functions
+**
+*****************************************************************************/
+
+static bt_status_t btif_in_get_adapter_properties(void)
+{
+    bt_property_t properties[6];
+    uint32_t num_props;
+
+    bt_bdaddr_t addr;
+    bt_bdname_t name;
+    bt_scan_mode_t mode;
+    uint32_t disc_timeout;
+    bt_bdaddr_t bonded_devices[BTM_SEC_MAX_DEVICE_RECORDS];
+    bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS];
+    num_props = 0;
+
+    /* BD_ADDR */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_BDADDR,
+                               sizeof(addr), &addr);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    /* BD_NAME */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_BDNAME,
+                               sizeof(name), &name);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    /* SCAN_MODE */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_ADAPTER_SCAN_MODE,
+                               sizeof(mode), &mode);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    /* DISC_TIMEOUT */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT,
+                               sizeof(disc_timeout), &disc_timeout);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    /* BONDED_DEVICES */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_ADAPTER_BONDED_DEVICES,
+                               sizeof(bonded_devices), bonded_devices);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    /* LOCAL UUIDs */
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_props], BT_PROPERTY_UUIDS,
+                               sizeof(local_uuids), local_uuids);
+    btif_storage_get_adapter_property(&properties[num_props]);
+    num_props++;
+
+    HAL_CBACK(bt_hal_cbacks, adapter_properties_cb,
+                     BT_STATUS_SUCCESS, num_props, properties);
+
+    return BT_STATUS_SUCCESS;
+}
+
+static bt_status_t btif_in_get_remote_device_properties(bt_bdaddr_t *bd_addr)
+{
+    bt_property_t remote_properties[8];
+    uint32_t num_props = 0;
+
+    bt_bdname_t name, alias;
+    uint32_t cod, devtype;
+    bt_uuid_t remote_uuids[BT_MAX_NUM_UUIDS];
+
+    memset(remote_properties, 0, sizeof(remote_properties));
+    BTIF_STORAGE_FILL_PROPERTY(&remote_properties[num_props], BT_PROPERTY_BDNAME,
+                               sizeof(name), &name);
+    btif_storage_get_remote_device_property(bd_addr,
+                                            &remote_properties[num_props]);
+    num_props++;
+
+    BTIF_STORAGE_FILL_PROPERTY(&remote_properties[num_props], BT_PROPERTY_REMOTE_FRIENDLY_NAME,
+                               sizeof(alias), &alias);
+    btif_storage_get_remote_device_property(bd_addr,
+                                            &remote_properties[num_props]);
+    num_props++;
+
+    BTIF_STORAGE_FILL_PROPERTY(&remote_properties[num_props], BT_PROPERTY_CLASS_OF_DEVICE,
+                               sizeof(cod), &cod);
+    btif_storage_get_remote_device_property(bd_addr,
+                                            &remote_properties[num_props]);
+    num_props++;
+
+    BTIF_STORAGE_FILL_PROPERTY(&remote_properties[num_props], BT_PROPERTY_TYPE_OF_DEVICE,
+                               sizeof(devtype), &devtype);
+    btif_storage_get_remote_device_property(bd_addr,
+                                            &remote_properties[num_props]);
+    num_props++;
+
+    BTIF_STORAGE_FILL_PROPERTY(&remote_properties[num_props], BT_PROPERTY_UUIDS,
+                               sizeof(remote_uuids), remote_uuids);
+    btif_storage_get_remote_device_property(bd_addr,
+                                            &remote_properties[num_props]);
+    num_props++;
+
+    HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                     BT_STATUS_SUCCESS, bd_addr, num_props, remote_properties);
+
+    return BT_STATUS_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         execute_storage_request
+**
+** Description      Executes adapter storage request in BTIF context
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+static void execute_storage_request(UINT16 event, char *p_param)
+{
+    uint8_t is_local;
+    int num_entries = 0;
+    bt_status_t status = BT_STATUS_SUCCESS;
+
+    BTIF_TRACE_EVENT1("execute storage request event : %d", event);
+
+    switch(event)
+    {
+        case BTIF_CORE_STORAGE_ADAPTER_WRITE:
+        {
+            btif_storage_req_t *p_req = (btif_storage_req_t*)p_param;
+            bt_property_t *p_prop = &(p_req->write_req.prop);
+            BTIF_TRACE_EVENT3("type: %d, len %d, 0x%x", p_prop->type,
+                               p_prop->len, p_prop->val);
+
+            status = btif_storage_set_adapter_property(p_prop);
+            HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, status, 1, p_prop);
+        } break;
+
+        case BTIF_CORE_STORAGE_ADAPTER_READ:
+        {
+            btif_storage_req_t *p_req = (btif_storage_req_t*)p_param;
+            char buf[512];
+            bt_property_t prop;
+            prop.type = p_req->read_req.type;
+            prop.val = (void*)buf;
+            prop.len = sizeof(buf);
+            status = btif_storage_get_adapter_property(&prop);
+            HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, status, 1, &prop);
+        } break;
+
+        case BTIF_CORE_STORAGE_ADAPTER_READ_ALL:
+        {
+            status = btif_in_get_adapter_properties();
+        } break;
+
+        case BTIF_CORE_STORAGE_NOTIFY_STATUS:
+        {
+            HAL_CBACK(bt_hal_cbacks, adapter_properties_cb, status, 0, NULL);
+        } break;
+
+        default:
+            BTIF_TRACE_ERROR2("%s invalid event id (%d)", __FUNCTION__, event);
+            break;
+    }
+}
+
+static void execute_storage_remote_request(UINT16 event, char *p_param)
+{
+    bt_status_t status = BT_STATUS_FAIL;
+    bt_property_t prop;
+
+    BTIF_TRACE_EVENT1("execute storage remote request event : %d", event);
+
+    switch (event)
+    {
+        case BTIF_CORE_STORAGE_REMOTE_READ:
+        {
+            char buf[1024];
+            btif_storage_req_t *p_req = (btif_storage_req_t*)p_param;
+            prop.type = p_req->read_req.type;
+            prop.val = (void*) buf;
+            prop.len = sizeof(buf);
+
+            status = btif_storage_get_remote_device_property(&(p_req->read_req.bd_addr),
+                                                             &prop);
+            HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                            status, &(p_req->read_req.bd_addr), 1, &prop);
+        }break;
+        case BTIF_CORE_STORAGE_REMOTE_WRITE:
+        {
+           btif_storage_req_t *p_req = (btif_storage_req_t*)p_param;
+           status = btif_storage_set_remote_device_property(&(p_req->write_req.bd_addr),
+                                                            &(p_req->write_req.prop));
+        }break;
+        case BTIF_CORE_STORAGE_REMOTE_READ_ALL:
+        {
+           btif_storage_req_t *p_req = (btif_storage_req_t*)p_param;
+           btif_in_get_remote_device_properties(&p_req->read_req.bd_addr);
+        }break;
+    }
+}
+
+void btif_adapter_properties_evt(bt_status_t status, uint32_t num_props,
+                                    bt_property_t *p_props)
+{
+    HAL_CBACK(bt_hal_cbacks, adapter_properties_cb,
+                     status, num_props, p_props);
+
+}
+void btif_remote_properties_evt(bt_status_t status, bt_bdaddr_t *remote_addr,
+                                   uint32_t num_props, bt_property_t *p_props)
+{
+    HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                     status, remote_addr, num_props, p_props);
+}
+
+/*******************************************************************************
+**
+** Function         btif_in_storage_request_copy_cb
+**
+** Description     Switch context callback function to perform the deep copy for
+**                 both the adapter and remote_device property API
+**
+** Returns          None
+**
+*******************************************************************************/
+static void btif_in_storage_request_copy_cb(UINT16 event,
+                                                 char *p_new_buf, char *p_old_buf)
+{
+     btif_storage_req_t *new_req = (btif_storage_req_t*)p_new_buf;
+     btif_storage_req_t *old_req = (btif_storage_req_t*)p_old_buf;
+
+     BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+     switch (event)
+     {
+         case BTIF_CORE_STORAGE_REMOTE_WRITE:
+         case BTIF_CORE_STORAGE_ADAPTER_WRITE:
+         {
+             bdcpy(new_req->write_req.bd_addr.address, old_req->write_req.bd_addr.address);
+             /* Copy the member variables one at a time */
+             new_req->write_req.prop.type = old_req->write_req.prop.type;
+             new_req->write_req.prop.len = old_req->write_req.prop.len;
+
+             new_req->write_req.prop.val = (UINT8 *)(p_new_buf + sizeof(btif_storage_req_t));
+             memcpy(new_req->write_req.prop.val, old_req->write_req.prop.val,
+                    old_req->write_req.prop.len);
+         }break;
+     }
+}
+
+/*******************************************************************************
+**
+** Function         btif_get_adapter_properties
+**
+** Description      Fetch all available properties (local & remote)
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_get_adapter_properties(void)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    return btif_transfer_context(execute_storage_request,
+                                 BTIF_CORE_STORAGE_ADAPTER_READ_ALL,
+                                 NULL, 0, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_get_adapter_property
+**
+** Description      Fetches property value from local cache
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_get_adapter_property(bt_property_type_t type)
+{
+    btif_storage_req_t req;
+
+    BTIF_TRACE_EVENT2("%s %d", __FUNCTION__, type);
+
+    /* Allow get_adapter_property only for BDADDR and BDNAME if BT is disabled */
+    if (!btif_is_enabled() && (type != BT_PROPERTY_BDADDR) && (type != BT_PROPERTY_BDNAME))
+        return BT_STATUS_NOT_READY;
+
+    memset(&(req.read_req.bd_addr), 0, sizeof(bt_bdaddr_t));
+    req.read_req.type = type;
+
+    return btif_transfer_context(execute_storage_request,
+                                 BTIF_CORE_STORAGE_ADAPTER_READ,
+                                (char*)&req, sizeof(btif_storage_req_t), NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_set_adapter_property
+**
+** Description      Updates core stack with property value and stores it in
+**                  local cache
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_set_adapter_property(const bt_property_t *property)
+{
+    btif_storage_req_t req;
+    bt_status_t status = BT_STATUS_SUCCESS;
+    int storage_req_id = BTIF_CORE_STORAGE_NOTIFY_STATUS; /* default */
+    char bd_name[BTM_MAX_LOC_BD_NAME_LEN +1];
+    UINT16  name_len = 0;
+
+    BTIF_TRACE_EVENT3("btif_set_adapter_property type: %d, len %d, 0x%x",
+                      property->type, property->len, property->val);
+
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    switch(property->type)
+    {
+        case BT_PROPERTY_BDNAME:
+            {
+                name_len = property->len > BTM_MAX_LOC_BD_NAME_LEN ? BTM_MAX_LOC_BD_NAME_LEN:
+                                                                     property->len;
+                memcpy(bd_name,property->val, name_len);
+                bd_name[name_len] = '\0';
+
+                BTIF_TRACE_EVENT1("set property name : %s", (char *)bd_name);
+
+                BTA_DmSetDeviceName((char *)bd_name);
+
+                storage_req_id = BTIF_CORE_STORAGE_ADAPTER_WRITE;
+            }
+            break;
+
+        case BT_PROPERTY_ADAPTER_SCAN_MODE:
+            {
+                bt_scan_mode_t mode = *(bt_scan_mode_t*)property->val;
+                tBTA_DM_DISC disc_mode;
+                tBTA_DM_CONN conn_mode;
+
+                switch(mode)
+                {
+                    case BT_SCAN_MODE_NONE:
+                        disc_mode = BTA_DM_NON_DISC;
+                        conn_mode = BTA_DM_NON_CONN;
+                        break;
+
+                    case BT_SCAN_MODE_CONNECTABLE:
+                        disc_mode = BTA_DM_NON_DISC;
+                        conn_mode = BTA_DM_CONN;
+                        break;
+
+                    case BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE:
+                        disc_mode = BTA_DM_GENERAL_DISC;
+                        conn_mode = BTA_DM_CONN;
+                        break;
+
+                    default:
+                        BTIF_TRACE_ERROR1("invalid scan mode (0x%x)", mode);
+                        return BT_STATUS_PARM_INVALID;
+                }
+
+                BTIF_TRACE_EVENT1("set property scan mode : %x", mode);
+
+                BTA_DmSetVisibility(disc_mode, conn_mode, BTA_DM_IGNORE, BTA_DM_IGNORE);
+
+                storage_req_id = BTIF_CORE_STORAGE_ADAPTER_WRITE;
+            }
+            break;
+        case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
+            {
+                /* Nothing to do beside store the value in NV.  Java
+                   will change the SCAN_MODE property after setting timeout,
+                   if required */
+                storage_req_id = BTIF_CORE_STORAGE_ADAPTER_WRITE;
+            }
+            break;
+        case BT_PROPERTY_BDADDR:
+        case BT_PROPERTY_UUIDS:
+        case BT_PROPERTY_ADAPTER_BONDED_DEVICES:
+        case BT_PROPERTY_REMOTE_FRIENDLY_NAME:
+            /* no write support through HAL, these properties are only populated from BTA events */
+            status = BT_STATUS_FAIL;
+            break;
+        default:
+            BTIF_TRACE_ERROR1("btif_get_adapter_property : invalid type %d",
+            property->type);
+            status = BT_STATUS_FAIL;
+            break;
+    }
+
+    if (storage_req_id != BTIF_CORE_STORAGE_NO_ACTION)
+    {
+        int btif_status;
+        /* pass on to storage for updating local database */
+
+        memset(&(req.write_req.bd_addr), 0, sizeof(bt_bdaddr_t));
+        memcpy(&(req.write_req.prop), property, sizeof(bt_property_t));
+
+        return btif_transfer_context(execute_storage_request,
+                                     storage_req_id,
+                                     (char*)&req,
+                                     sizeof(btif_storage_req_t)+property->len,
+                                     btif_in_storage_request_copy_cb);
+    }
+
+    return status;
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_device_property
+**
+** Description      Fetches the remote device property from the NVRAM
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_device_property(bt_bdaddr_t *remote_addr,
+                                                 bt_property_type_t type)
+{
+    btif_storage_req_t req;
+
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    memcpy(&(req.read_req.bd_addr), remote_addr, sizeof(bt_bdaddr_t));
+    req.read_req.type = type;
+    return btif_transfer_context(execute_storage_remote_request,
+                                 BTIF_CORE_STORAGE_REMOTE_READ,
+                                 (char*)&req, sizeof(btif_storage_req_t),
+                                 NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_device_properties
+**
+** Description      Fetches all the remote device properties from NVRAM
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_device_properties(bt_bdaddr_t *remote_addr)
+{
+    btif_storage_req_t req;
+
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    memcpy(&(req.read_req.bd_addr), remote_addr, sizeof(bt_bdaddr_t));
+    return btif_transfer_context(execute_storage_remote_request,
+                                 BTIF_CORE_STORAGE_REMOTE_READ_ALL,
+                                 (char*)&req, sizeof(btif_storage_req_t),
+                                 NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_set_remote_device_property
+**
+** Description      Writes the remote device property to NVRAM.
+**                  Currently, BT_PROPERTY_REMOTE_FRIENDLY_NAME is the only
+**                  remote device property that can be set
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_set_remote_device_property(bt_bdaddr_t *remote_addr,
+                                                 const bt_property_t *property)
+{
+    btif_storage_req_t req;
+
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    memcpy(&(req.write_req.bd_addr), remote_addr, sizeof(bt_bdaddr_t));
+    memcpy(&(req.write_req.prop), property, sizeof(bt_property_t));
+
+    return btif_transfer_context(execute_storage_remote_request,
+                                 BTIF_CORE_STORAGE_REMOTE_WRITE,
+                                 (char*)&req,
+                                 sizeof(btif_storage_req_t)+property->len,
+                                 btif_in_storage_request_copy_cb);
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_get_remote_service_record
+**
+** Description      Looks up the service matching uuid on the remote device
+**                  and fetches the SCN and service_name if the UUID is found
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_get_remote_service_record(bt_bdaddr_t *remote_addr,
+                                               bt_uuid_t *uuid)
+{
+    if (!btif_is_enabled())
+        return BT_STATUS_NOT_READY;
+
+    return btif_dm_get_remote_service_record(remote_addr, uuid);
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_get_enabled_services_mask
+**
+** Description      Fetches currently enabled services
+**
+** Returns          tBTA_SERVICE_MASK
+**
+*******************************************************************************/
+
+tBTA_SERVICE_MASK btif_get_enabled_services_mask(void)
+{
+    return btif_enabled_services;
+}
+
+/*******************************************************************************
+**
+** Function         btif_enable_service
+**
+** Description      Enables the service 'service_ID' to the service_mask.
+**                  Upon BT enable, BTIF core shall invoke the BTA APIs to
+**                  enable the profiles
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_enable_service(tBTA_SERVICE_ID service_id)
+{
+    tBTA_SERVICE_ID *p_id = &service_id;
+
+    /* If BT is enabled, we need to switch to BTIF context and trigger the
+     * enable for that profile
+     *
+     * Otherwise, we just set the flag. On BT_Enable, the DM will trigger
+     * enable for the profiles that have been enabled */
+
+    btif_enabled_services |= (1 << service_id);
+
+    BTIF_TRACE_ERROR2("%s: current services:0x%x", __FUNCTION__, btif_enabled_services);
+
+    if (btif_is_enabled())
+    {
+        btif_transfer_context(btif_dm_execute_service_request,
+                              BTIF_DM_ENABLE_SERVICE,
+                              (char*)p_id, sizeof(tBTA_SERVICE_ID), NULL);
+    }
+
+    return BT_STATUS_SUCCESS;
+}
+/*******************************************************************************
+**
+** Function         btif_disable_service
+**
+** Description      Disables the service 'service_ID' to the service_mask.
+**                  Upon BT disable, BTIF core shall invoke the BTA APIs to
+**                  disable the profiles
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_disable_service(tBTA_SERVICE_ID service_id)
+{
+    tBTA_SERVICE_ID *p_id = &service_id;
+
+    /* If BT is enabled, we need to switch to BTIF context and trigger the
+     * disable for that profile so that the appropriate uuid_property_changed will
+     * be triggerred. Otherwise, we just need to clear the service_id in the mask
+     */
+
+    btif_enabled_services &=  (tBTA_SERVICE_MASK)(~(1<<service_id));
+
+    BTIF_TRACE_ERROR2("%s: Current Services:0x%x", __FUNCTION__, btif_enabled_services);
+
+    if (btif_is_enabled())
+    {
+        btif_transfer_context(btif_dm_execute_service_request,
+                              BTIF_DM_DISABLE_SERVICE,
+                              (char*)p_id, sizeof(tBTA_SERVICE_ID), NULL);
+    }
+
+    return BT_STATUS_SUCCESS;
+}
diff --git a/btif/src/btif_dm.c b/btif/src/btif_dm.c
new file mode 100755
index 0000000..5517f55
--- /dev/null
+++ b/btif/src/btif_dm.c
@@ -0,0 +1,1876 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_dm.c
+ *
+ *  Description:   Contains Device Management (DM) related functionality
+ *
+ *
+ ***********************************************************************************/
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <hardware/bluetooth.h>
+
+#include <utils/Log.h>
+#include <cutils/properties.h>
+#include "gki.h"
+#include "btu.h"
+#include "bd.h"
+#include "bta_api.h"
+#include "btif_api.h"
+#include "btif_util.h"
+#include "btif_storage.h"
+#include "btif_hh.h"
+#include "btif_config.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define COD_UNCLASSIFIED ((0x1F) << 8)
+#define COD_HID_KEYBOARD       0x0540
+#define COD_HID_POINTING       0x0580
+#define COD_HID_COMBO          0x05C0
+#define COD_AV_HEADSETS        0x0404
+#define COD_AV_HANDSFREE       0x0408
+#define COD_AV_HEADPHONES      0x0418
+#define COD_AV_PORTABLE_AUDIO  0x041C
+#define COD_AV_HIFI_AUDIO      0x0428
+
+
+#define BTIF_DM_DEFAULT_INQ_MAX_RESULTS     0
+#define BTIF_DM_DEFAULT_INQ_MAX_DURATION    10
+
+typedef struct {
+    bt_bond_state_t state;
+    BD_ADDR bd_addr;
+    UINT8   is_temp;
+    UINT8   pin_code_len;
+    UINT8   is_ssp;
+    UINT8   autopair_attempts;
+    UINT8   is_local_initiated;
+    UINT8   bonded_pending_sdp;
+} btif_dm_pairing_cb_t;
+
+typedef struct {
+    BD_ADDR bd_addr;
+    BD_NAME bd_name;
+} btif_dm_remote_name_t;
+
+typedef struct
+{
+    BT_OCTET16 sp_c;
+    BT_OCTET16 sp_r;
+    BD_ADDR  oob_bdaddr;  /* peer bdaddr*/
+} btif_dm_oob_cb_t;
+#define BTA_SERVICE_ID_TO_SERVICE_MASK(id)       (1 << (id))
+
+/* This flag will be true if HCI_Inquiry is in progress */
+static BOOLEAN btif_dm_inquiry_in_progress = FALSE;
+
+/******************************************************************************
+**  Static functions
+******************************************************************************/
+static btif_dm_pairing_cb_t pairing_cb;
+static btif_dm_oob_cb_t     oob_cb;
+static void btif_dm_generic_evt(UINT16 event, char* p_param);
+static void btif_dm_cb_create_bond(bt_bdaddr_t *bd_addr);
+static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME *p_remote_name);
+static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name,
+                                          DEV_CLASS dev_class, tBT_DEVICE_TYPE dev_type);
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+extern UINT16 bta_service_id_to_uuid_lkup_tbl [BTA_MAX_SERVICE_ID];
+extern bt_status_t btif_hf_execute_service(BOOLEAN b_enable);
+extern bt_status_t btif_av_execute_service(BOOLEAN b_enable);
+extern bt_status_t btif_hh_execute_service(BOOLEAN b_enable);
+extern int btif_hh_connect(bt_bdaddr_t *bd_addr);
+
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+bt_status_t btif_in_execute_service_request(tBTA_SERVICE_ID service_id,
+                                                BOOLEAN b_enable)
+{
+    /* Check the service_ID and invoke the profile's BT state changed API */
+    switch (service_id)
+    {
+         case BTA_HFP_SERVICE_ID:
+         case BTA_HSP_SERVICE_ID:
+         {
+              btif_hf_execute_service(b_enable);
+         }break;
+         case BTA_A2DP_SERVICE_ID:
+         {
+              btif_av_execute_service(b_enable);
+         }break;
+         case BTA_HID_SERVICE_ID:
+         {
+              btif_hh_execute_service(b_enable);
+         }break;
+
+         default:
+              BTIF_TRACE_ERROR1("%s: Unknown service being enabled", __FUNCTION__);
+              return BT_STATUS_FAIL;
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         check_eir_remote_name
+**
+** Description      Check if remote name is in the EIR data
+**
+** Returns          TRUE if remote name found
+**                  Populate p_remote_name, if provided and remote name found
+**
+*******************************************************************************/
+static BOOLEAN check_eir_remote_name(tBTA_DM_SEARCH *p_search_data,
+                            UINT8 *p_remote_name, UINT8 *p_remote_name_len)
+{
+    UINT8 *p_eir_remote_name = NULL;
+    UINT8 remote_name_len = 0;
+
+    /* Check EIR for remote name and services */
+    if (p_search_data->inq_res.p_eir)
+    {
+        p_eir_remote_name = BTA_CheckEirData(p_search_data->inq_res.p_eir,
+                BTM_EIR_COMPLETE_LOCAL_NAME_TYPE, &remote_name_len);
+        if (!p_eir_remote_name)
+        {
+            p_eir_remote_name = BTA_CheckEirData(p_search_data->inq_res.p_eir,
+                    BTM_EIR_SHORTENED_LOCAL_NAME_TYPE, &remote_name_len);
+        }
+
+        if (p_eir_remote_name)
+        {
+            if (remote_name_len > BD_NAME_LEN)
+                remote_name_len = BD_NAME_LEN;
+
+            if (p_remote_name && p_remote_name_len)
+            {
+                memcpy(p_remote_name, p_eir_remote_name, remote_name_len);
+                *(p_remote_name + remote_name_len) = 0;
+                *p_remote_name_len = remote_name_len;
+            }
+
+            return TRUE;
+        }
+    }
+
+    return FALSE;
+
+}
+
+/*******************************************************************************
+**
+** Function         check_cached_remote_name
+**
+** Description      Check if remote name is in the NVRAM cache
+**
+** Returns          TRUE if remote name found
+**                  Populate p_remote_name, if provided and remote name found
+**
+*******************************************************************************/
+static BOOLEAN check_cached_remote_name(tBTA_DM_SEARCH *p_search_data,
+                                UINT8 *p_remote_name, UINT8 *p_remote_name_len)
+{
+    bt_bdname_t bdname;
+    bt_bdaddr_t remote_bdaddr;
+    bt_property_t prop_name;
+
+    /* check if we already have it in our btif_storage cache */
+    bdcpy(remote_bdaddr.address, p_search_data->inq_res.bd_addr);
+    BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_BDNAME,
+                               sizeof(bt_bdname_t), &bdname);
+    if (btif_storage_get_remote_device_property(
+        &remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS)
+    {
+        if (p_remote_name && p_remote_name_len)
+        {
+            strcpy((char *)p_remote_name, (char *)bdname.name);
+            *p_remote_name_len = strlen((char *)p_remote_name);
+        }
+        return TRUE;
+    }
+
+    return FALSE;
+}
+
+BOOLEAN check_cod(const bt_bdaddr_t *remote_bdaddr, uint32_t cod)
+{
+    uint32_t    remote_cod;
+    bt_property_t prop_name;
+
+    /* check if we already have it in our btif_storage cache */
+    BTIF_STORAGE_FILL_PROPERTY(&prop_name, BT_PROPERTY_CLASS_OF_DEVICE,
+                               sizeof(uint32_t), &remote_cod);
+    if (btif_storage_get_remote_device_property((bt_bdaddr_t *)remote_bdaddr, &prop_name) == BT_STATUS_SUCCESS)
+    {
+        if ((remote_cod & 0x7ff) == cod)
+            return TRUE;
+    }
+
+    return FALSE;
+}
+
+static void bond_state_changed(bt_status_t status, bt_bdaddr_t *bd_addr, bt_bond_state_t state)
+{
+    /* Send bonding state only once - based on outgoing/incoming we may receive duplicates */
+    if ( (pairing_cb.state == state) && (state == BT_BOND_STATE_BONDING) )
+        return;
+
+    if (pairing_cb.is_temp)
+    {
+       state = BT_BOND_STATE_NONE;
+    }
+    BTIF_TRACE_DEBUG3("%s: state=%d prev_state=%d", __FUNCTION__, state, pairing_cb.state);
+
+    HAL_CBACK(bt_hal_cbacks, bond_state_changed_cb, status, bd_addr, state);
+
+    if (state == BT_BOND_STATE_BONDING)
+    {
+        pairing_cb.state = state;
+        bdcpy(pairing_cb.bd_addr, bd_addr->address);
+    }
+    else
+    {
+        memset(&pairing_cb, 0, sizeof(pairing_cb));
+    }
+
+}
+
+
+static void btif_update_remote_properties(BD_ADDR bd_addr, BD_NAME bd_name,
+                                          DEV_CLASS dev_class, tBT_DEVICE_TYPE device_type)
+{
+    int num_properties = 0;
+    bt_property_t properties[3];
+    bt_bdaddr_t bdaddr;
+    bt_status_t status;
+    UINT32 cod;
+    bt_device_type_t dev_type;
+
+    memset(properties, 0, sizeof(properties));
+    bdcpy(bdaddr.address, bd_addr);
+
+    /* remote name */
+    if (strlen((const char *) bd_name))
+    {
+        BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                            BT_PROPERTY_BDNAME, strlen((char *)bd_name), bd_name);
+        status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]);
+        ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device name", status);
+        num_properties++;
+    }
+
+    /* class of device */
+    cod = devclass2uint(dev_class);
+    if ( cod == 0) {
+        BTIF_TRACE_DEBUG1("%s():cod is 0, set as unclassified", __FUNCTION__);
+        cod = COD_UNCLASSIFIED;
+    }
+
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                        BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod);
+    status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]);
+    ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device class", status);
+    num_properties++;
+
+    /* device type */
+    dev_type = device_type;
+    BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                        BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), &dev_type);
+    status = btif_storage_set_remote_device_property(&bdaddr, &properties[num_properties]);
+    ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device type", status);
+    num_properties++;
+
+    HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                     status, &bdaddr, num_properties, properties);
+}
+/*******************************************************************************
+**
+** Function         hid_remote_name_cback
+**
+** Description      Remote name callback for HID device. Called in stack context
+**                  Special handling for HID devices
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hid_remote_name_cback(void *p_param)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_HID_REMOTE_NAME,
+        (char *)p_param, sizeof(tBTM_REMOTE_DEV_NAME), NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_cb_hid_remote_name
+**
+** Description      Remote name callback for HID device. Called in btif context
+**                  Special handling for HID devices
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_cb_hid_remote_name(tBTM_REMOTE_DEV_NAME *p_remote_name)
+{
+    BTIF_TRACE_DEBUG3("%s: status=%d pairing_cb.state=%d", __FUNCTION__, p_remote_name->status, pairing_cb.state);
+    if (pairing_cb.state == BT_BOND_STATE_BONDING)
+    {
+        bt_bdaddr_t remote_bd;
+
+        bdcpy(remote_bd.address, pairing_cb.bd_addr);
+
+        if (p_remote_name->status == BTM_SUCCESS)
+        {
+            bond_state_changed(BT_STATUS_SUCCESS, &remote_bd, BT_BOND_STATE_BONDED);
+        }
+        else
+            bond_state_changed(BT_STATUS_FAIL, &remote_bd, BT_BOND_STATE_NONE);
+    }
+}
+
+int remove_hid_bond(bt_bdaddr_t *bd_addr)
+{
+        /* For HID device, inorder to avoid the HID device from re-connecting again after unpairing,
+             * we need to do virtual unplug
+             */
+        bdstr_t bdstr;
+        BTIF_TRACE_DEBUG2("%s---Removing HID bond--%s", __FUNCTION__,bd2str((bt_bdaddr_t *)bd_addr, &bdstr));
+        return btif_hh_virtual_unplug(bd_addr);
+}
+/*******************************************************************************
+**
+** Function         btif_dm_cb_create_bond
+**
+** Description      Create bond initiated from the BTIF thread context
+**                  Special handling for HID devices
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_cb_create_bond(bt_bdaddr_t *bd_addr)
+{
+    bond_state_changed(BT_STATUS_SUCCESS, bd_addr, BT_BOND_STATE_BONDING);
+    if (check_cod(bd_addr, COD_HID_POINTING)){
+            int status;
+            status = btif_hh_connect(bd_addr);
+            if(status != BT_STATUS_SUCCESS)
+                bond_state_changed(status, bd_addr, BT_BOND_STATE_NONE);
+    }
+    else
+        BTA_DmBond ((UINT8 *)bd_addr->address);
+
+        /*  Track  originator of bond creation  */
+        pairing_cb.is_local_initiated = TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_cb_remove_bond
+**
+** Description      remove bond initiated from the BTIF thread context
+**                  Special handling for HID devices
+**
+** Returns          void
+**
+*******************************************************************************/
+void btif_dm_cb_remove_bond(bt_bdaddr_t *bd_addr)
+{
+     bdstr_t bdstr;
+     /*special handling for HID devices */
+     if (check_cod(bd_addr, COD_HID_POINTING) ||
+        check_cod(bd_addr, COD_HID_KEYBOARD) ||
+        check_cod(bd_addr, COD_HID_COMBO))
+    {
+        #if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE))
+        if(remove_hid_bond(bd_addr) != BTA_SUCCESS)
+            BTA_DmRemoveDevice((UINT8 *)bd_addr->address);
+        #endif
+    }
+    else
+    {
+        if (BTA_DmRemoveDevice((UINT8 *)bd_addr->address) == BTA_SUCCESS)
+        {
+            BTIF_TRACE_DEBUG1("Successfully removed bonding with device: %s",
+                                            bd2str((bt_bdaddr_t *)bd_addr, &bdstr));
+        }
+        else
+            BTIF_TRACE_DEBUG1("Removed bonding with device failed: %s",
+                                            bd2str((bt_bdaddr_t *)bd_addr, &bdstr));
+    }
+}
+
+/*******************************************************************************
+**
+** Function         search_devices_copy_cb
+**
+** Description      Deep copy callback for search devices event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void search_devices_copy_cb(UINT16 event, char *p_dest, char *p_src)
+{
+    tBTA_DM_SEARCH *p_dest_data =  (tBTA_DM_SEARCH *) p_dest;
+    tBTA_DM_SEARCH *p_src_data =  (tBTA_DM_SEARCH *) p_src;
+
+    if (!p_src)
+        return;
+
+    BTIF_TRACE_DEBUG2("%s: event=%s", __FUNCTION__, dump_dm_search_event(event));
+    memcpy(p_dest_data, p_src_data, sizeof(tBTA_DM_SEARCH));
+    switch (event)
+    {
+        case BTA_DM_INQ_RES_EVT:
+        {
+            if (p_src_data->inq_res.p_eir)
+            {
+                p_dest_data->inq_res.p_eir = (UINT8 *)(p_dest + sizeof(tBTA_DM_SEARCH));
+                memcpy(p_dest_data->inq_res.p_eir, p_src_data->inq_res.p_eir, HCI_EXT_INQ_RESPONSE_LEN);
+            }
+        }
+        break;
+
+        case BTA_DM_DISC_RES_EVT:
+        {
+            if (p_src_data->disc_res.raw_data_size && p_src_data->disc_res.p_raw_data)
+            {
+                p_dest_data->disc_res.p_raw_data = (UINT8 *)(p_dest + sizeof(tBTA_DM_SEARCH));
+                memcpy(p_dest_data->disc_res.p_raw_data,
+                    p_src_data->disc_res.p_raw_data, p_src_data->disc_res.raw_data_size);
+            }
+        }
+        break;
+    }
+}
+
+static void search_services_copy_cb(UINT16 event, char *p_dest, char *p_src)
+{
+    tBTA_DM_SEARCH *p_dest_data =  (tBTA_DM_SEARCH *) p_dest;
+    tBTA_DM_SEARCH *p_src_data =  (tBTA_DM_SEARCH *) p_src;
+
+    if (!p_src)
+        return;
+    memcpy(p_dest_data, p_src_data, sizeof(tBTA_DM_SEARCH));
+    switch (event)
+    {
+         case BTA_DM_DISC_RES_EVT:
+         {
+              if ((p_src_data->disc_res.result == BTA_SUCCESS) &&
+                  (p_src_data->disc_res.num_uuids > 0))
+              {
+                  p_dest_data->disc_res.p_uuid_list = (UINT8*)(p_dest + sizeof(tBTA_DM_SEARCH));
+                  memcpy(p_dest_data->disc_res.p_uuid_list, p_src_data->disc_res.p_uuid_list,
+                         p_src_data->disc_res.num_uuids*MAX_UUID_SIZE);
+              }
+         } break;
+    }
+}
+/******************************************************************************
+**
+**  BTIF DM callback events
+**
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_dm_pin_req_evt
+**
+** Description      Executes pin request event in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_pin_req_evt(tBTA_DM_PIN_REQ *p_pin_req)
+{
+    bt_bdaddr_t bd_addr;
+    bt_bdname_t bd_name;
+    UINT32 cod;
+    bt_pin_code_t pin_code;
+
+    /* Remote properties update */
+    btif_update_remote_properties(p_pin_req->bd_addr, p_pin_req->bd_name,
+                                  p_pin_req->dev_class, BT_DEVICE_TYPE_BREDR);
+
+    bdcpy(bd_addr.address, p_pin_req->bd_addr);
+    memcpy(bd_name.name, p_pin_req->bd_name, BD_NAME_LEN);
+
+    bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING);
+
+    cod = devclass2uint(p_pin_req->dev_class);
+
+    if ( cod == 0) {
+        BTIF_TRACE_DEBUG1("%s():cod is 0, set as unclassified", __FUNCTION__);
+        cod = COD_UNCLASSIFIED;
+    }
+
+    /* check for auto pair possiblity only if bond was initiated by local device */
+    if (pairing_cb.is_local_initiated)
+    {
+        if (check_cod(&bd_addr, COD_AV_HEADSETS) ||
+            check_cod(&bd_addr, COD_AV_HANDSFREE) ||
+            check_cod(&bd_addr, COD_AV_HEADPHONES) ||
+            check_cod(&bd_addr, COD_AV_PORTABLE_AUDIO) ||
+            check_cod(&bd_addr, COD_AV_HIFI_AUDIO) ||
+            check_cod(&bd_addr, COD_HID_POINTING))
+        {
+            BTIF_TRACE_DEBUG1("%s()cod matches for auto pair", __FUNCTION__);
+            /*  Check if this device can be auto paired  */
+            if ((btif_storage_is_device_autopair_blacklisted(&bd_addr) == FALSE) &&
+                (pairing_cb.autopair_attempts == 0))
+            {
+                BTIF_TRACE_DEBUG1("%s() Attempting auto pair", __FUNCTION__);
+                pin_code.pin[0] = 0x30;
+                pin_code.pin[1] = 0x30;
+                pin_code.pin[2] = 0x30;
+                pin_code.pin[3] = 0x30;
+
+                pairing_cb.autopair_attempts++;
+                BTA_DmPinReply( (UINT8*)bd_addr.address, TRUE, 4, pin_code.pin);
+                return;
+            }
+        }
+        else if (check_cod(&bd_addr, COD_HID_KEYBOARD) ||
+                 check_cod(&bd_addr, COD_HID_COMBO))
+        {
+            if(( btif_storage_is_fixed_pin_zeros_keyboard (&bd_addr) == TRUE) &&
+               (pairing_cb.autopair_attempts == 0))
+            {
+                BTIF_TRACE_DEBUG1("%s() Attempting auto pair", __FUNCTION__);
+                pin_code.pin[0] = 0x30;
+                pin_code.pin[1] = 0x30;
+                pin_code.pin[2] = 0x30;
+                pin_code.pin[3] = 0x30;
+
+                pairing_cb.autopair_attempts++;
+                BTA_DmPinReply( (UINT8*)bd_addr.address, TRUE, 4, pin_code.pin);
+                return;
+            }
+        }
+    }
+    HAL_CBACK(bt_hal_cbacks, pin_request_cb,
+                     &bd_addr, &bd_name, cod);
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_ssp_cfm_req_evt
+**
+** Description      Executes SSP confirm request event in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_ssp_cfm_req_evt(tBTA_DM_SP_CFM_REQ *p_ssp_cfm_req)
+{
+    bt_bdaddr_t bd_addr;
+    bt_bdname_t bd_name;
+    UINT32 cod;
+    BOOLEAN is_incoming = !(pairing_cb.state == BT_BOND_STATE_BONDING);
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    /* Remote properties update */
+    btif_update_remote_properties(p_ssp_cfm_req->bd_addr, p_ssp_cfm_req->bd_name,
+                                  p_ssp_cfm_req->dev_class, BT_DEVICE_TYPE_BREDR);
+
+    bdcpy(bd_addr.address, p_ssp_cfm_req->bd_addr);
+    memcpy(bd_name.name, p_ssp_cfm_req->bd_name, BD_NAME_LEN);
+
+    /* Set the pairing_cb based on the local & remote authentication requirements */
+    bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING);
+
+    /* if just_works and bonding bit is not set treat this as temporary */
+    if (p_ssp_cfm_req->just_works && !(p_ssp_cfm_req->loc_auth_req & BTM_AUTH_BONDS) &&
+        !(p_ssp_cfm_req->rmt_auth_req & BTM_AUTH_BONDS))
+        pairing_cb.is_temp = TRUE;
+    else
+        pairing_cb.is_temp = FALSE;
+
+    pairing_cb.is_ssp = TRUE;
+
+    /* If JustWorks auto-accept */
+    if (p_ssp_cfm_req->just_works)
+    {
+        /* Pairing consent for JustWorks needed if:
+         * 1. Incoming pairing is detected AND
+         * 2. local IO capabilities are DisplayYesNo AND
+         * 3. remote IO capabiltiies are DisplayOnly or NoInputNoOutput;
+         */
+        if ((is_incoming) && ((p_ssp_cfm_req->loc_io_caps == 0x01) &&
+                (p_ssp_cfm_req->rmt_io_caps == 0x00 || p_ssp_cfm_req->rmt_io_caps == 0x03)))
+        {
+            BTIF_TRACE_EVENT3("%s: User consent needed for incoming pairing request. loc_io_caps: %d, rmt_io_caps: %d",
+                __FUNCTION__, p_ssp_cfm_req->loc_io_caps, p_ssp_cfm_req->rmt_io_caps);
+        }
+        else
+        {
+            BTIF_TRACE_EVENT1("%s: Auto-accept JustWorks pairing", __FUNCTION__);
+            btif_dm_ssp_reply(&bd_addr, BT_SSP_VARIANT_CONSENT, TRUE, 0);
+            return;
+        }
+    }
+
+    cod = devclass2uint(p_ssp_cfm_req->dev_class);
+
+    if ( cod == 0) {
+        ALOGD("cod is 0, set as unclassified");
+        cod = COD_UNCLASSIFIED;
+    }
+
+    pairing_cb.bonded_pending_sdp = FALSE;
+    HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name, cod,
+                     (p_ssp_cfm_req->just_works ? BT_SSP_VARIANT_CONSENT : BT_SSP_VARIANT_PASSKEY_CONFIRMATION),
+                     p_ssp_cfm_req->num_val);
+}
+
+static void btif_dm_ssp_key_notif_evt(tBTA_DM_SP_KEY_NOTIF *p_ssp_key_notif)
+{
+    bt_bdaddr_t bd_addr;
+    bt_bdname_t bd_name;
+    UINT32 cod;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    /* Remote properties update */
+    btif_update_remote_properties(p_ssp_key_notif->bd_addr, p_ssp_key_notif->bd_name,
+                                  p_ssp_key_notif->dev_class, BT_DEVICE_TYPE_BREDR);
+
+    bdcpy(bd_addr.address, p_ssp_key_notif->bd_addr);
+    memcpy(bd_name.name, p_ssp_key_notif->bd_name, BD_NAME_LEN);
+
+    bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDING);
+    pairing_cb.is_ssp = TRUE;
+    cod = devclass2uint(p_ssp_key_notif->dev_class);
+
+    if ( cod == 0) {
+        ALOGD("cod is 0, set as unclassified");
+        cod = COD_UNCLASSIFIED;
+    }
+
+    HAL_CBACK(bt_hal_cbacks, ssp_request_cb, &bd_addr, &bd_name,
+                     cod, BT_SSP_VARIANT_PASSKEY_NOTIFICATION,
+                     p_ssp_key_notif->passkey);
+}
+/*******************************************************************************
+**
+** Function         btif_dm_auth_cmpl_evt
+**
+** Description      Executes authentication complete event in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_auth_cmpl_evt (tBTA_DM_AUTH_CMPL *p_auth_cmpl)
+{
+    /* Save link key, if not temporary */
+    bt_bdaddr_t bd_addr;
+    bt_status_t status = BT_STATUS_FAIL;
+    bt_bond_state_t state = BT_BOND_STATE_NONE;
+
+    bdcpy(bd_addr.address, p_auth_cmpl->bd_addr);
+    if ( (p_auth_cmpl->success == TRUE) && (p_auth_cmpl->key_present) )
+    {
+        if ((p_auth_cmpl->key_type < HCI_LKEY_TYPE_DEBUG_COMB)  || (p_auth_cmpl->key_type == HCI_LKEY_TYPE_AUTH_COMB) ||
+            (p_auth_cmpl->key_type == HCI_LKEY_TYPE_CHANGED_COMB) || (!pairing_cb.is_temp))
+        {
+            bt_status_t ret;
+            BTIF_TRACE_DEBUG3("%s: Storing link key. key_type=0x%x, is_temp=%d",
+                __FUNCTION__, p_auth_cmpl->key_type, pairing_cb.is_temp);
+            ret = btif_storage_add_bonded_device(&bd_addr,
+                                p_auth_cmpl->key, p_auth_cmpl->key_type,
+                                pairing_cb.pin_code_len);
+            ASSERTC(ret == BT_STATUS_SUCCESS, "storing link key failed", ret);
+        }
+        else
+        {
+            BTIF_TRACE_DEBUG3("%s: Temporary key. Not storing. key_type=0x%x, is_temp=%d",
+                __FUNCTION__, p_auth_cmpl->key_type, pairing_cb.is_temp);
+        }
+    }
+    if (p_auth_cmpl->success)
+    {
+        status = BT_STATUS_SUCCESS;
+        state = BT_BOND_STATE_BONDED;
+
+        /* Trigger SDP on the device */
+        pairing_cb.bonded_pending_sdp = TRUE;
+        btif_dm_get_remote_services(&bd_addr);
+        /* Do not call bond_state_changed_cb yet. Wait till fetch remote service is complete */
+    }
+    else
+    {
+         /*Map the HCI fail reason  to  bt status  */
+        switch(p_auth_cmpl->fail_reason)
+        {
+            case HCI_ERR_PAGE_TIMEOUT:
+            case HCI_ERR_CONNECTION_TOUT:
+                status =  BT_STATUS_RMT_DEV_DOWN;
+                break;
+
+            /* map the auth failure codes, so we can retry pairing if necessary */
+            case HCI_ERR_AUTH_FAILURE:
+            case HCI_ERR_HOST_REJECT_SECURITY:
+            case HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE:
+            case HCI_ERR_UNIT_KEY_USED:
+            case HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED:
+            case HCI_ERR_INSUFFCIENT_SECURITY:
+                BTIF_TRACE_DEBUG1(" %s() Authentication fail ", __FUNCTION__);
+                if (pairing_cb.autopair_attempts  == 1)
+                {
+                    BTIF_TRACE_DEBUG1("%s(): Adding device to blacklist ", __FUNCTION__);
+
+                    /* Add the device to dynamic black list only if this device belongs to Audio/pointing dev class  */
+                    if (check_cod(&bd_addr, COD_AV_HEADSETS) ||
+                        check_cod(&bd_addr, COD_AV_HANDSFREE) ||
+                        check_cod(&bd_addr, COD_AV_HEADPHONES) ||
+                        check_cod(&bd_addr, COD_AV_PORTABLE_AUDIO) ||
+                        check_cod(&bd_addr, COD_AV_HIFI_AUDIO) ||
+                        check_cod(&bd_addr, COD_HID_POINTING))
+                    {
+                        btif_storage_add_device_to_autopair_blacklist (&bd_addr);
+                    }
+                    pairing_cb.autopair_attempts++;
+
+                    /* Create the Bond once again */
+                    BTIF_TRACE_DEBUG1("%s() auto pair failed. Reinitiate Bond", __FUNCTION__);
+                    btif_dm_cb_create_bond (&bd_addr);
+                    return;
+                }
+                else
+                {
+                    /* if autopair attempts are more than 1, or not attempted */
+                    status =  BT_STATUS_AUTH_FAILURE;
+                }
+                break;
+
+            default:
+                status =  BT_STATUS_FAIL;
+        }
+        bond_state_changed(status, &bd_addr, state);
+    }
+}
+
+/******************************************************************************
+**
+** Function         btif_dm_search_devices_evt
+**
+** Description      Executes search devices callback events in btif context
+**
+** Returns          void
+**
+******************************************************************************/
+static void btif_dm_search_devices_evt (UINT16 event, char *p_param)
+{
+    tBTA_DM_SEARCH *p_search_data;
+    BTIF_TRACE_EVENT2("%s event=%s", __FUNCTION__, dump_dm_search_event(event));
+
+    switch (event)
+    {
+        case BTA_DM_DISC_RES_EVT:
+        {
+            p_search_data = (tBTA_DM_SEARCH *)p_param;
+            /* Remote name update */
+            if (strlen((const char *) p_search_data->disc_res.bd_name))
+            {
+                bt_property_t properties[1];
+                bt_bdaddr_t bdaddr;
+                bt_status_t status;
+
+                properties[0].type = BT_PROPERTY_BDNAME;
+                properties[0].val = p_search_data->disc_res.bd_name;
+                properties[0].len = strlen((char *)p_search_data->disc_res.bd_name);
+                bdcpy(bdaddr.address, p_search_data->disc_res.bd_addr);
+
+                status = btif_storage_set_remote_device_property(&bdaddr, &properties[0]);
+                ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device property", status);
+                HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                                 status, &bdaddr, 1, properties);
+            }
+            /* TODO: Services? */
+        }
+        break;
+
+        case BTA_DM_INQ_RES_EVT:
+        {
+            /* inquiry result */
+            UINT32 cod;
+            UINT8 *p_eir_remote_name = NULL;
+            bt_bdname_t bdname;
+            bt_bdaddr_t bdaddr;
+            UINT8 remote_name_len;
+            UINT8 *p_cached_name = NULL;
+            tBTA_SERVICE_MASK services = 0;
+            bdstr_t bdstr;
+
+            p_search_data = (tBTA_DM_SEARCH *)p_param;
+            bdcpy(bdaddr.address, p_search_data->inq_res.bd_addr);
+
+            BTIF_TRACE_DEBUG3("%s() %s device_type = 0x%x\n", __FUNCTION__, bd2str(&bdaddr, &bdstr),
+#if (BLE_INCLUDED == TRUE)
+                    p_search_data->inq_res.device_type);
+#else
+                    BT_DEVICE_TYPE_BREDR);
+#endif
+            bdname.name[0] = 0;
+
+            cod = devclass2uint (p_search_data->inq_res.dev_class);
+
+            if ( cod == 0) {
+                ALOGD("cod is 0, set as unclassified");
+                cod = COD_UNCLASSIFIED;
+            }
+
+            if (!check_eir_remote_name(p_search_data, bdname.name, &remote_name_len))
+                check_cached_remote_name(p_search_data, bdname.name, &remote_name_len);
+
+            /* Check EIR for remote name and services */
+            if (p_search_data->inq_res.p_eir)
+            {
+                BTA_GetEirService(p_search_data->inq_res.p_eir, &services);
+                BTIF_TRACE_DEBUG2("%s()EIR BTA services = %08X", __FUNCTION__, (UINT32)services);
+                /* TODO:  Get the service list and check to see which uuids we got and send it back to the client. */
+            }
+
+
+            {
+                bt_property_t properties[5];
+                bt_device_type_t dev_type;
+                uint32_t num_properties = 0;
+                bt_status_t status;
+
+                memset(properties, 0, sizeof(properties));
+                /* BD_ADDR */
+                BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                                    BT_PROPERTY_BDADDR, sizeof(bdaddr), &bdaddr);
+                num_properties++;
+                /* BD_NAME */
+                /* Don't send BDNAME if it is empty */
+                if (bdname.name[0]) {
+                    BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                                               BT_PROPERTY_BDNAME,
+                                               strlen((char *)bdname.name), &bdname);
+                    num_properties++;
+                }
+
+                /* DEV_CLASS */
+                BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                                    BT_PROPERTY_CLASS_OF_DEVICE, sizeof(cod), &cod);
+                num_properties++;
+                /* DEV_TYPE */
+#if (BLE_INCLUDED == TRUE)
+                /* FixMe: Assumption is that bluetooth.h and BTE enums match */
+                dev_type = p_search_data->inq_res.device_type;
+#else
+                dev_type = BT_DEVICE_TYPE_BREDR;
+#endif
+                BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                                    BT_PROPERTY_TYPE_OF_DEVICE, sizeof(dev_type), &dev_type);
+                num_properties++;
+                /* RSSI */
+                BTIF_STORAGE_FILL_PROPERTY(&properties[num_properties],
+                                    BT_PROPERTY_REMOTE_RSSI, sizeof(int8_t),
+                                    &(p_search_data->inq_res.rssi));
+                num_properties++;
+
+                status = btif_storage_add_remote_device(&bdaddr, num_properties, properties);
+                ASSERTC(status == BT_STATUS_SUCCESS, "failed to save remote device (inquiry)", status);
+
+                /* Callback to notify upper layer of device */
+                HAL_CBACK(bt_hal_cbacks, device_found_cb,
+                                 num_properties, properties);
+            }
+        }
+        break;
+
+        case BTA_DM_INQ_CMPL_EVT:
+        {
+        }
+        break;
+        case BTA_DM_DISC_CMPL_EVT:
+        {
+            HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STOPPED);
+        }
+        break;
+        case BTA_DM_SEARCH_CANCEL_CMPL_EVT:
+        {
+           /* if inquiry is not in progress and we get a cancel event, then
+            * it means we are done with inquiry, but remote_name fetches are in
+            * progress
+            *
+            * if inquiry  is in progress, then we don't want to act on this cancel_cmpl_evt
+            * but instead wait for the cancel_cmpl_evt via the Busy Level
+            *
+            */
+           if (btif_dm_inquiry_in_progress == FALSE)
+           {
+               HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STOPPED);
+           }
+        }
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_search_services_evt
+**
+** Description      Executes search services event in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_search_services_evt(UINT16 event, char *p_param)
+{
+    tBTA_DM_SEARCH *p_data = (tBTA_DM_SEARCH*)p_param;
+
+    BTIF_TRACE_EVENT2("%s:  event = %d", __FUNCTION__, event);
+    switch (event)
+    {
+        case BTA_DM_DISC_RES_EVT:
+        {
+            bt_uuid_t uuid_arr[BT_MAX_NUM_UUIDS]; /* Max 32 services */
+            bt_property_t prop;
+            uint32_t i = 0,  j = 0;
+            bt_bdaddr_t bd_addr;
+            bt_status_t ret;
+
+            bdcpy(bd_addr.address, p_data->disc_res.bd_addr);
+
+            BTIF_TRACE_DEBUG3("%s:(result=0x%x, services 0x%x)", __FUNCTION__,
+                    p_data->disc_res.result, p_data->disc_res.services);
+            prop.type = BT_PROPERTY_UUIDS;
+            prop.len = 0;
+            if ((p_data->disc_res.result == BTA_SUCCESS) && (p_data->disc_res.num_uuids > 0))
+            {
+                 prop.val = p_data->disc_res.p_uuid_list;
+                 prop.len = p_data->disc_res.num_uuids * MAX_UUID_SIZE;
+                 for (i=0; i < p_data->disc_res.num_uuids; i++)
+                 {
+                      char temp[256];
+                      uuid_to_string((bt_uuid_t*)(p_data->disc_res.p_uuid_list + (i*MAX_UUID_SIZE)), temp);
+                      BTIF_TRACE_ERROR2("Index: %d uuid:%s", i, temp);
+                 }
+            }
+
+            /* onUuidChanged requires getBondedDevices to be populated.
+            ** bond_state_changed needs to be sent prior to remote_device_property
+            */
+            if ((pairing_cb.state == BT_BOND_STATE_BONDING) &&
+                (bdcmp(p_data->disc_res.bd_addr, pairing_cb.bd_addr) == 0)&&
+                pairing_cb.bonded_pending_sdp == TRUE)
+            {
+                 BTIF_TRACE_DEBUG1("%s Remote Service SDP done. Call bond_state_changed_cb BONDED",
+                                   __FUNCTION__);
+                 pairing_cb.bonded_pending_sdp = FALSE;
+                 bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_BONDED);
+            }
+
+            /* Also write this to the NVRAM */
+            ret = btif_storage_set_remote_device_property(&bd_addr, &prop);
+            ASSERTC(ret == BT_STATUS_SUCCESS, "storing remote services failed", ret);
+            /* Send the event to the BTIF */
+            HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                             BT_STATUS_SUCCESS, &bd_addr, 1, &prop);
+        }
+        break;
+
+        case BTA_DM_DISC_CMPL_EVT:
+            /* fixme */
+        break;
+
+        default:
+        {
+            ASSERTC(0, "unhandled search services event", event);
+        }
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_remote_service_record_evt
+**
+** Description      Executes search service record event in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_remote_service_record_evt(UINT16 event, char *p_param)
+{
+    tBTA_DM_SEARCH *p_data = (tBTA_DM_SEARCH*)p_param;
+
+    BTIF_TRACE_EVENT2("%s:  event = %d", __FUNCTION__, event);
+    switch (event)
+    {
+        case BTA_DM_DISC_RES_EVT:
+        {
+            bt_service_record_t rec;
+            bt_property_t prop;
+            uint32_t i = 0;
+            bt_bdaddr_t bd_addr;
+
+            memset(&rec, 0, sizeof(bt_service_record_t));
+            bdcpy(bd_addr.address, p_data->disc_res.bd_addr);
+
+            BTIF_TRACE_DEBUG3("%s:(result=0x%x, services 0x%x)", __FUNCTION__,
+                    p_data->disc_res.result, p_data->disc_res.services);
+            prop.type = BT_PROPERTY_SERVICE_RECORD;
+            prop.val = (void*)&rec;
+            prop.len = sizeof(rec);
+
+            /* disc_res.result is overloaded with SCN. Cannot check result */
+            p_data->disc_res.services &= ~BTA_USER_SERVICE_MASK;
+            /* TODO: Get the UUID as well */
+            rec.channel = p_data->disc_res.result - 3;
+            /* TODO: Need to get the service name using p_raw_data */
+            rec.name[0] = 0;
+
+            HAL_CBACK(bt_hal_cbacks, remote_device_properties_cb,
+                             BT_STATUS_SUCCESS, &bd_addr, 1, &prop);
+        }
+        break;
+
+        default:
+        {
+           ASSERTC(0, "unhandled remote service record event", event);
+        }
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_upstreams_cback
+**
+** Description      Executes UPSTREAMS events in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_upstreams_evt(UINT16 event, char* p_param)
+{
+    tBTA_DM_SEC_EVT dm_event = (tBTA_DM_SEC_EVT)event;
+    tBTA_DM_SEC *p_data = (tBTA_DM_SEC*)p_param;
+    tBTA_SERVICE_MASK service_mask;
+    uint32_t i;
+    bt_bdaddr_t bd_addr;
+
+    BTIF_TRACE_EVENT1("btif_dm_upstreams_cback  ev: %s", dump_dm_event(event));
+
+    switch (event)
+    {
+        case BTA_DM_ENABLE_EVT:
+        {
+             BD_NAME bdname;
+             bt_status_t status;
+             bt_property_t prop;
+             prop.type = BT_PROPERTY_BDNAME;
+             prop.len = BD_NAME_LEN;
+             prop.val = (void*)bdname;
+
+             status = btif_storage_get_adapter_property(&prop);
+             /* Storage does not have a name yet.
+             ** Use the default name and write it to the chip
+             */
+             if (status != BT_STATUS_SUCCESS)
+             {
+                 BTA_DmSetDeviceName((char *)BTM_DEF_LOCAL_NAME);
+                 /* Hmmm...Should we store this too??? */
+             }
+             else
+             {
+                 /* A name exists in the storage. Make this the device name */
+                 BTA_DmSetDeviceName((char*)prop.val);
+             }
+
+             /* for each of the enabled services in the mask, trigger the profile
+              * enable */
+             service_mask = btif_get_enabled_services_mask();
+             for (i=0; i <= BTA_MAX_SERVICE_ID; i++)
+             {
+                 if (service_mask &
+                     (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i)))
+                 {
+                     btif_in_execute_service_request(i, TRUE);
+                 }
+             }
+             /* clear control blocks */
+             memset(&pairing_cb, 0, sizeof(btif_dm_pairing_cb_t));
+
+             /* This function will also trigger the adapter_properties_cb
+             ** and bonded_devices_info_cb
+             */
+             btif_storage_load_bonded_devices();
+
+             btif_storage_load_autopair_device_list();
+
+             btif_enable_bluetooth_evt(p_data->enable.status, p_data->enable.bd_addr);
+        }
+        break;
+
+        case BTA_DM_DISABLE_EVT:
+            /* for each of the enabled services in the mask, trigger the profile
+             * disable */
+            service_mask = btif_get_enabled_services_mask();
+            for (i=0; i <= BTA_MAX_SERVICE_ID; i++)
+            {
+                if (service_mask &
+                    (tBTA_SERVICE_MASK)(BTA_SERVICE_ID_TO_SERVICE_MASK(i)))
+                {
+                    btif_in_execute_service_request(i, FALSE);
+                }
+            }
+            btif_disable_bluetooth_evt();
+            break;
+
+        case BTA_DM_PIN_REQ_EVT:
+            btif_dm_pin_req_evt(&p_data->pin_req);
+            break;
+
+        case BTA_DM_AUTH_CMPL_EVT:
+            btif_dm_auth_cmpl_evt(&p_data->auth_cmpl);
+            break;
+
+        case BTA_DM_BOND_CANCEL_CMPL_EVT:
+            if (pairing_cb.state == BT_BOND_STATE_BONDING)
+            {
+                bdcpy(bd_addr.address, pairing_cb.bd_addr);
+                bond_state_changed(p_data->bond_cancel_cmpl.result, &bd_addr, BT_BOND_STATE_NONE);
+            }
+            break;
+
+        case BTA_DM_SP_CFM_REQ_EVT:
+            btif_dm_ssp_cfm_req_evt(&p_data->cfm_req);
+            break;
+        case BTA_DM_SP_KEY_NOTIF_EVT:
+            btif_dm_ssp_key_notif_evt(&p_data->key_notif);
+            break;
+
+        case BTA_DM_DEV_UNPAIRED_EVT:
+            bdcpy(bd_addr.address, p_data->link_down.bd_addr);
+
+            /*special handling for HID devices */
+            #if (defined(BTA_HH_INCLUDED) && (BTA_HH_INCLUDED == TRUE))
+            if (check_cod(&bd_addr, COD_HID_KEYBOARD )|| check_cod(&bd_addr, COD_HID_COMBO) || check_cod(&bd_addr, COD_HID_POINTING)) {
+                btif_hh_remove_device(bd_addr);
+            }
+            #endif
+            btif_storage_remove_bonded_device(&bd_addr);
+            bond_state_changed(BT_STATUS_SUCCESS, &bd_addr, BT_BOND_STATE_NONE);
+            break;
+
+        case BTA_DM_BUSY_LEVEL_EVT:
+        {
+            UINT8 busy_level;
+            busy_level = p_data->busy_level.level;
+            if (busy_level & BTM_BL_INQUIRY_PAGING_MASK)
+            {
+                if (busy_level == BTM_BL_INQUIRY_STARTED)
+                {
+                       HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb,
+                                                BT_DISCOVERY_STARTED);
+                       btif_dm_inquiry_in_progress = TRUE;
+                }
+                else if (busy_level == BTM_BL_INQUIRY_CANCELLED)
+                {
+                       HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb,
+                                                BT_DISCOVERY_STOPPED);
+                       btif_dm_inquiry_in_progress = FALSE;
+                }
+                else if (busy_level == BTM_BL_INQUIRY_COMPLETE)
+                {
+                       btif_dm_inquiry_in_progress = FALSE;
+                }
+            }
+        }break;
+
+        case BTA_DM_LINK_UP_EVT:
+            bdcpy(bd_addr.address, p_data->link_up.bd_addr);
+            BTIF_TRACE_DEBUG0("BTA_DM_LINK_UP_EVT. Sending BT_ACL_STATE_CONNECTED");
+            HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS,
+                      &bd_addr, BT_ACL_STATE_CONNECTED);
+            break;
+
+        case BTA_DM_LINK_DOWN_EVT:
+            bdcpy(bd_addr.address, p_data->link_down.bd_addr);
+            BTIF_TRACE_DEBUG0("BTA_DM_LINK_DOWN_EVT. Sending BT_ACL_STATE_DISCONNECTED");
+            HAL_CBACK(bt_hal_cbacks, acl_state_changed_cb, BT_STATUS_SUCCESS,
+                      &bd_addr, BT_ACL_STATE_DISCONNECTED);
+            break;
+
+        case BTA_DM_HW_ERROR_EVT:
+            BTIF_TRACE_ERROR0("Received H/W Error. ");
+            /* Flush storage data */
+            btif_config_flush();
+            usleep(100000); /* 100milliseconds */
+            /* Killing the process to force a restart as part of fault tolerance */
+            kill(getpid(), SIGKILL);
+            break;
+
+        case BTA_DM_AUTHORIZE_EVT:
+        case BTA_DM_SIG_STRENGTH_EVT:
+        case BTA_DM_SP_RMT_OOB_EVT:
+        case BTA_DM_SP_KEYPRESS_EVT:
+        case BTA_DM_ROLE_CHG_EVT:
+        case BTA_DM_BLE_KEY_EVT:
+        case BTA_DM_BLE_SEC_REQ_EVT:
+        case BTA_DM_BLE_PASSKEY_NOTIF_EVT:
+        case BTA_DM_BLE_PASSKEY_REQ_EVT:
+        case BTA_DM_BLE_OOB_REQ_EVT:
+        case BTA_DM_BLE_LOCAL_IR_EVT:
+        case BTA_DM_BLE_LOCAL_ER_EVT:
+        case BTA_DM_BLE_AUTH_CMPL_EVT:
+        default:
+            BTIF_TRACE_WARNING1( "btif_dm_cback : unhandled event (%d)", event );
+            break;
+    }
+} /* btui_security_cback() */
+
+
+/*******************************************************************************
+**
+** Function         btif_dm_generic_evt
+**
+** Description      Executes non-BTA upstream events in BTIF context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_dm_generic_evt(UINT16 event, char* p_param)
+{
+    BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+    switch(event)
+    {
+        case BTIF_DM_CB_DISCOVERY_STARTED:
+        {
+            HAL_CBACK(bt_hal_cbacks, discovery_state_changed_cb, BT_DISCOVERY_STARTED);
+        }
+        break;
+
+        case BTIF_DM_CB_CREATE_BOND:
+        {
+            btif_dm_cb_create_bond((bt_bdaddr_t *)p_param);
+        }
+        break;
+
+        case BTIF_DM_CB_REMOVE_BOND:
+        {
+            btif_dm_cb_remove_bond((bt_bdaddr_t *)p_param);
+        }
+        break;
+
+        case BTIF_DM_CB_HID_REMOTE_NAME:
+        {
+            btif_dm_cb_hid_remote_name((tBTM_REMOTE_DEV_NAME *)p_param);
+        }
+        break;
+
+        case BTIF_DM_CB_BOND_STATE_BONDING:
+            {
+                bond_state_changed(BT_STATUS_SUCCESS, (bt_bdaddr_t *)p_param, BT_BOND_STATE_BONDING);
+            }
+            break;
+        default:
+        {
+            BTIF_TRACE_WARNING2("%s : Unknown event 0x%x", __FUNCTION__, event);
+        }
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bte_dm_evt
+**
+** Description      Switches context from BTE to BTIF for all DM events
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void bte_dm_evt(tBTA_DM_SEC_EVT event, tBTA_DM_SEC *p_data)
+{
+    bt_status_t status;
+
+    /* switch context to btif task context (copy full union size for convenience) */
+    status = btif_transfer_context(btif_dm_upstreams_evt, (uint16_t)event, (void*)p_data, sizeof(tBTA_DM_SEC), NULL);
+
+    /* catch any failed context transfers */
+    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+}
+
+/*******************************************************************************
+**
+** Function         bte_search_devices_evt
+**
+** Description      Switches context from BTE to BTIF for DM search events
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bte_search_devices_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data)
+{
+    UINT16 param_len = 0;
+
+    if (p_data)
+        param_len += sizeof(tBTA_DM_SEARCH);
+    /* Allocate buffer to hold the pointers (deep copy). The pointers will point to the end of the tBTA_DM_SEARCH */
+    switch (event)
+    {
+        case BTA_DM_INQ_RES_EVT:
+        {
+            if (p_data->inq_res.p_eir)
+                param_len += HCI_EXT_INQ_RESPONSE_LEN;
+        }
+        break;
+
+        case BTA_DM_DISC_RES_EVT:
+        {
+            if (p_data->disc_res.raw_data_size && p_data->disc_res.p_raw_data)
+                param_len += p_data->disc_res.raw_data_size;
+        }
+        break;
+    }
+    BTIF_TRACE_DEBUG3("%s event=%s param_len=%d", __FUNCTION__, dump_dm_search_event(event), param_len);
+
+    /* if remote name is available in EIR, set teh flag so that stack doesnt trigger RNR */
+    if (event == BTA_DM_INQ_RES_EVT)
+        p_data->inq_res.remt_name_not_required = check_eir_remote_name(p_data, NULL, NULL);
+
+    btif_transfer_context (btif_dm_search_devices_evt , (UINT16) event, (void *)p_data, param_len,
+        (param_len > sizeof(tBTA_DM_SEARCH)) ? search_devices_copy_cb : NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bte_dm_search_services_evt
+**
+** Description      Switches context from BTE to BTIF for DM search services
+**                  event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bte_dm_search_services_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data)
+{
+    UINT16 param_len = 0;
+   if (p_data)
+       param_len += sizeof(tBTA_DM_SEARCH);
+   switch (event)
+   {
+         case BTA_DM_DISC_RES_EVT:
+         {
+             if ((p_data->disc_res.result == BTA_SUCCESS) && (p_data->disc_res.num_uuids > 0)) {
+                  param_len += (p_data->disc_res.num_uuids * MAX_UUID_SIZE);
+             }
+         } break;
+   }
+   /* TODO: The only other member that needs a deep copy is the p_raw_data. But not sure
+    * if raw_data is needed. */
+   btif_transfer_context(btif_dm_search_services_evt, event, (char*)p_data, param_len,
+         (param_len > sizeof(tBTA_DM_SEARCH)) ? search_services_copy_cb : NULL);
+}
+
+/*******************************************************************************
+**
+** Function         bte_dm_remote_service_record_evt
+**
+** Description      Switches context from BTE to BTIF for DM search service
+**                  record event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bte_dm_remote_service_record_evt(tBTA_DM_SEARCH_EVT event, tBTA_DM_SEARCH *p_data)
+{
+   /* TODO: The only member that needs a deep copy is the p_raw_data. But not sure yet if this is needed. */
+   btif_transfer_context(btif_dm_remote_service_record_evt, event, (char*)p_data, sizeof(tBTA_DM_SEARCH), NULL);
+}
+
+/*****************************************************************************
+**
+**   btif api functions (no context switch)
+**
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         btif_dm_start_discovery
+**
+** Description      Start device discovery/inquiry
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_start_discovery(void)
+{
+    tBTA_DM_INQ inq_params;
+    tBTA_SERVICE_MASK services = 0;
+
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    /* TODO: Do we need to handle multiple inquiries at the same time? */
+
+    /* Set inquiry params and call API */
+#if (BLE_INCLUDED == TRUE)
+    inq_params.mode = BTA_DM_GENERAL_INQUIRY|BTA_BLE_GENERAL_INQUIRY;
+#else
+    inq_params.mode = BTA_DM_GENERAL_INQUIRY;
+#endif
+    inq_params.duration = BTIF_DM_DEFAULT_INQ_MAX_DURATION;
+
+    inq_params.max_resps = BTIF_DM_DEFAULT_INQ_MAX_RESULTS;
+    inq_params.report_dup = TRUE;
+
+    inq_params.filter_type = BTA_DM_INQ_CLR;
+    /* TODO: Filter device by BDA needs to be implemented here */
+
+    /* Will be enabled to TRUE once inquiry busy level has been received */
+    btif_dm_inquiry_in_progress = FALSE;
+    /* find nearby devices */
+    BTA_DmSearch(&inq_params, services, bte_search_devices_evt);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_cancel_discovery
+**
+** Description      Cancels search
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_cancel_discovery(void)
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    BTA_DmSearchCancel();
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_create_bond
+**
+** Description      Initiate bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_create_bond(const bt_bdaddr_t *bd_addr)
+{
+    bdstr_t bdstr;
+
+    BTIF_TRACE_EVENT2("%s: bd_addr=%s", __FUNCTION__, bd2str((bt_bdaddr_t *) bd_addr, &bdstr));
+    if (pairing_cb.state != BT_BOND_STATE_NONE)
+        return BT_STATUS_BUSY;
+
+    btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_CREATE_BOND,
+                          (char *)bd_addr, sizeof(bt_bdaddr_t), NULL);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_cancel_bond
+**
+** Description      Initiate bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_dm_cancel_bond(const bt_bdaddr_t *bd_addr)
+{
+    bdstr_t bdstr;
+
+    BTIF_TRACE_EVENT2("%s: bd_addr=%s", __FUNCTION__, bd2str((bt_bdaddr_t *)bd_addr, &bdstr));
+
+    /* TODO:
+    **  1. Restore scan modes
+    **  2. special handling for HID devices
+    */
+    if (pairing_cb.state == BT_BOND_STATE_BONDING)
+    {
+        if (pairing_cb.is_ssp)
+        {
+            BTA_DmConfirm( (UINT8 *)bd_addr->address, FALSE);
+        }
+        else
+        {
+            BTA_DmPinReply( (UINT8 *)bd_addr->address, FALSE, 0, NULL);
+        }
+        /* Cancel bonding, in case it is in ACL connection setup state */
+        BTA_DmBondCancel ((UINT8 *)bd_addr->address);
+        btif_storage_remove_bonded_device((bt_bdaddr_t *)bd_addr);
+    }
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_remove_bond
+**
+** Description      Removes bonding with the specified device
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_dm_remove_bond(const bt_bdaddr_t *bd_addr)
+{
+    bdstr_t bdstr;
+
+    BTIF_TRACE_EVENT2("%s: bd_addr=%s", __FUNCTION__, bd2str((bt_bdaddr_t *)bd_addr, &bdstr));
+    btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_REMOVE_BOND,
+                          (char *)bd_addr, sizeof(bt_bdaddr_t), NULL);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_pin_reply
+**
+** Description      BT legacy pairing - PIN code reply
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_dm_pin_reply( const bt_bdaddr_t *bd_addr, uint8_t accept,
+                               uint8_t pin_len, bt_pin_code_t *pin_code)
+{
+    BTIF_TRACE_EVENT2("%s: accept=%d", __FUNCTION__, accept);
+
+    BTA_DmPinReply( (UINT8 *)bd_addr->address, accept, pin_len, pin_code->pin);
+
+    if (accept)
+        pairing_cb.pin_code_len = pin_len;
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_ssp_reply
+**
+** Description      BT SSP Reply - Just Works, Numeric Comparison & Passkey Entry
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+bt_status_t btif_dm_ssp_reply(const bt_bdaddr_t *bd_addr,
+                                 bt_ssp_variant_t variant, uint8_t accept,
+                                 uint32_t passkey)
+{
+    if (variant == BT_SSP_VARIANT_PASSKEY_ENTRY)
+    {
+        /* This is not implemented in the stack.
+         * For devices with display, this is not needed
+        */
+        BTIF_TRACE_WARNING1("%s: Not implemented", __FUNCTION__);
+        return BT_STATUS_FAIL;
+    }
+    /* BT_SSP_VARIANT_CONSENT & BT_SSP_VARIANT_PASSKEY_CONFIRMATION supported */
+    BTIF_TRACE_EVENT2("%s: accept=%d", __FUNCTION__, accept);
+    BTA_DmConfirm( (UINT8 *)bd_addr->address, accept);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_adapter_property
+**
+** Description     Queries the BTA for the adapter property
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_get_adapter_property(bt_property_t *prop)
+{
+    bt_status_t status;
+
+    BTIF_TRACE_EVENT2("%s: type=0x%x", __FUNCTION__, prop->type);
+    switch (prop->type)
+    {
+        case BT_PROPERTY_BDNAME:
+        {
+            bt_bdname_t *bd_name = (bt_bdname_t*)prop->val;
+            strcpy((char *)bd_name->name, (char *)BTM_DEF_LOCAL_NAME);
+            prop->len = strlen((char *)bd_name->name);
+        }
+        break;
+
+        case BT_PROPERTY_ADAPTER_SCAN_MODE:
+        {
+            /* if the storage does not have it. Most likely app never set it. Default is NONE */
+            bt_scan_mode_t *mode = (bt_scan_mode_t*)prop->val;
+            *mode = BT_SCAN_MODE_NONE;
+            prop->len = sizeof(bt_scan_mode_t);
+        }
+        break;
+
+        case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
+        {
+            uint32_t *tmt = (uint32_t*)prop->val;
+            *tmt = 120; /* default to 120s, if not found in NV */
+            prop->len = sizeof(uint32_t);
+        }
+        break;
+
+        default:
+            prop->len = 0;
+            return BT_STATUS_FAIL;
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_remote_services
+**
+** Description      Start SDP to get remote services
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+bt_status_t btif_dm_get_remote_services(bt_bdaddr_t *remote_addr)
+{
+    bdstr_t bdstr;
+
+    BTIF_TRACE_EVENT2("%s: remote_addr=%s", __FUNCTION__, bd2str(remote_addr, &bdstr));
+
+    BTA_DmDiscover(remote_addr->address, BTA_ALL_SERVICE_MASK,
+                   bte_dm_search_services_evt, TRUE);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_dm_get_remote_service_record
+**
+** Description      Start SDP to get remote service record
+**
+**
+** Returns          bt_status_t
+*******************************************************************************/
+bt_status_t btif_dm_get_remote_service_record(bt_bdaddr_t *remote_addr,
+                                                    bt_uuid_t *uuid)
+{
+    tSDP_UUID sdp_uuid;
+    bdstr_t bdstr;
+
+    BTIF_TRACE_EVENT2("%s: remote_addr=%s", __FUNCTION__, bd2str(remote_addr, &bdstr));
+
+    sdp_uuid.len = MAX_UUID_SIZE;
+    memcpy(sdp_uuid.uu.uuid128, uuid->uu, MAX_UUID_SIZE);
+
+    BTA_DmDiscoverUUID(remote_addr->address, &sdp_uuid,
+                       bte_dm_remote_service_record_evt, TRUE);
+
+    return BT_STATUS_SUCCESS;
+}
+
+void btif_dm_execute_service_request(UINT16 event, char *p_param)
+{
+    BOOLEAN b_enable = FALSE;
+    bt_status_t status;
+    if (event == BTIF_DM_ENABLE_SERVICE)
+    {
+        b_enable = TRUE;
+    }
+    status = btif_in_execute_service_request(*((tBTA_SERVICE_ID*)p_param), b_enable);
+    if (status == BT_STATUS_SUCCESS)
+    {
+        bt_property_t property;
+        bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS];
+
+        /* Now send the UUID_PROPERTY_CHANGED event to the upper layer */
+        BTIF_STORAGE_FILL_PROPERTY(&property, BT_PROPERTY_UUIDS,
+                                    sizeof(local_uuids), local_uuids);
+        btif_storage_get_adapter_property(&property);
+        HAL_CBACK(bt_hal_cbacks, adapter_properties_cb,
+                          BT_STATUS_SUCCESS, 1, &property);
+    }
+    return;
+}
+
+#if (BTM_OOB_INCLUDED == TRUE)
+void btif_dm_set_oob_for_io_req(tBTA_OOB_DATA  *p_oob_data)
+{
+    if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 &&
+        oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 )
+    {
+        *p_oob_data = FALSE;
+    }
+    else
+    {
+        *p_oob_data = TRUE;
+    }
+    BTIF_TRACE_DEBUG1("btif_dm_set_oob_for_io_req *p_oob_data=%d", *p_oob_data);
+}
+#endif /* BTM_OOB_INCLUDED */
+
+#ifdef BTIF_DM_OOB_TEST
+void btif_dm_load_local_oob(void)
+{
+    char prop_oob[32];
+    property_get("service.brcm.bt.oob", prop_oob, "3");
+    BTIF_TRACE_DEBUG1("btif_dm_load_local_oob prop_oob = %s",prop_oob);
+    if (prop_oob[0] != '3')
+    {
+#if (BTM_OOB_INCLUDED == TRUE)
+        if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 &&
+            oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 )
+        {
+            BTIF_TRACE_DEBUG0("btif_dm_load_local_oob: read OOB, call BTA_DmLocalOob()");
+            BTA_DmLocalOob();
+        }
+#else
+        BTIF_TRACE_ERROR0("BTM_OOB_INCLUDED is FALSE!!(btif_dm_load_local_oob)");
+#endif
+    }
+}
+
+void btif_dm_proc_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r)
+{
+    FILE *fp;
+    char *path_a = "/data/misc/bluedroid/LOCAL/a.key";
+    char *path_b = "/data/misc/bluedroid/LOCAL/b.key";
+    char *path = NULL;
+    char prop_oob[32];
+    BTIF_TRACE_DEBUG1("btif_dm_proc_loc_oob: valid=%d", valid);
+    if (oob_cb.sp_c[0] == 0 && oob_cb.sp_c[1] == 0 &&
+        oob_cb.sp_c[2] == 0 && oob_cb.sp_c[3] == 0 &&
+        valid)
+    {
+        BTIF_TRACE_DEBUG0("save local OOB data in memory");
+        memcpy(oob_cb.sp_c, c, BT_OCTET16_LEN);
+        memcpy(oob_cb.sp_r, r, BT_OCTET16_LEN);
+        property_get("service.brcm.bt.oob", prop_oob, "3");
+        BTIF_TRACE_DEBUG1("btif_dm_proc_loc_oob prop_oob = %s",prop_oob);
+        if (prop_oob[0] == '1')
+            path = path_a;
+        else if (prop_oob[0] == '2')
+            path = path_b;
+        if (path)
+        {
+            fp = fopen(path, "wb+");
+            if (fp == NULL)
+            {
+                BTIF_TRACE_DEBUG1("btif_dm_proc_loc_oob: failed to save local OOB data to %s", path);
+            }
+            else
+            {
+                BTIF_TRACE_DEBUG1("btif_dm_proc_loc_oob: save local OOB data into file %s",path);
+                fwrite (c , 1 , BT_OCTET16_LEN , fp );
+                fwrite (r , 1 , BT_OCTET16_LEN , fp );
+                fclose(fp);
+            }
+        }
+    }
+}
+BOOLEAN btif_dm_proc_rmt_oob(BD_ADDR bd_addr,  BT_OCTET16 p_c, BT_OCTET16 p_r)
+{
+    char t[128];
+    FILE *fp;
+    char *path_a = "/data/misc/bluedroid/LOCAL/a.key";
+    char *path_b = "/data/misc/bluedroid/LOCAL/b.key";
+    char *path = NULL;
+    char prop_oob[32];
+    BOOLEAN result = FALSE;
+    bt_bdaddr_t bt_bd_addr;
+    bdcpy(oob_cb.oob_bdaddr, bd_addr);
+    property_get("service.brcm.bt.oob", prop_oob, "3");
+    BTIF_TRACE_DEBUG1("btif_dm_proc_rmt_oob prop_oob = %s",prop_oob);
+    if (prop_oob[0] == '1')
+        path = path_b;
+    else if (prop_oob[0] == '2')
+        path = path_a;
+    if (path)
+    {
+        fp = fopen(path, "rb");
+        if (fp == NULL)
+        {
+            BTIF_TRACE_DEBUG1("btapp_dm_rmt_oob_reply: failed to read OOB keys from %s",path);
+            return FALSE;
+        }
+        else
+        {
+            BTIF_TRACE_DEBUG1("btif_dm_proc_rmt_oob: read OOB data from %s",path);
+            fread (p_c , 1 , BT_OCTET16_LEN , fp );
+            fread (p_r , 1 , BT_OCTET16_LEN , fp );
+            fclose(fp);
+        }
+        BTIF_TRACE_DEBUG0("----btif_dm_proc_rmt_oob: TRUE");
+        sprintf(t, "%02x:%02x:%02x:%02x:%02x:%02x",
+                oob_cb.oob_bdaddr[0], oob_cb.oob_bdaddr[1], oob_cb.oob_bdaddr[2],
+                oob_cb.oob_bdaddr[3], oob_cb.oob_bdaddr[4], oob_cb.oob_bdaddr[5]);
+        BTIF_TRACE_DEBUG1("----btif_dm_proc_rmt_oob: peer_bdaddr = %s", t);
+        sprintf(t, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+                p_c[0], p_c[1], p_c[2],  p_c[3],  p_c[4],  p_c[5],  p_c[6],  p_c[7],
+                p_c[8], p_c[9], p_c[10], p_c[11], p_c[12], p_c[13], p_c[14], p_c[15]);
+        BTIF_TRACE_DEBUG1("----btif_dm_proc_rmt_oob: c = %s",t);
+        sprintf(t, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x",
+                p_r[0], p_r[1], p_r[2],  p_r[3],  p_r[4],  p_r[5],  p_r[6],  p_r[7],
+                p_r[8], p_r[9], p_r[10], p_r[11], p_r[12], p_r[13], p_r[14], p_r[15]);
+        BTIF_TRACE_DEBUG1("----btif_dm_proc_rmt_oob: r = %s",t);
+        bdcpy(bt_bd_addr.address, bd_addr);
+        btif_transfer_context(btif_dm_generic_evt, BTIF_DM_CB_BOND_STATE_BONDING,
+                              (char *)&bt_bd_addr, sizeof(bt_bdaddr_t), NULL);
+        result = TRUE;
+    }
+    BTIF_TRACE_DEBUG1("btif_dm_proc_rmt_oob result=%d",result);
+    return result;
+}
+#endif /*  BTIF_DM_OOB_TEST */
+
+void btif_dm_on_disable()
+{
+    /* cancel any pending pairing requests */
+    if (pairing_cb.state == BT_BOND_STATE_BONDING)
+    {
+        bt_bdaddr_t bd_addr;
+
+        BTIF_TRACE_DEBUG1("%s: Cancel pending pairing request", __FUNCTION__);
+        bdcpy(bd_addr.address, pairing_cb.bd_addr);
+        btif_dm_cancel_bond(&bd_addr);
+    }
+}
diff --git a/btif/src/btif_hf.c b/btif/src/btif_hf.c
new file mode 100755
index 0000000..7ce22b1
--- /dev/null
+++ b/btif/src/btif_hf.c
@@ -0,0 +1,1200 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hf.c
+ *
+ *  Description:   Handsfree Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hf.h>
+#include <stdlib.h>
+
+#define LOG_TAG "BTIF_HF"
+#include "btif_common.h"
+#include "btif_util.h"
+#include "btif_profile_queue.h"
+
+#include "bd.h"
+#include "bta_ag_api.h"
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+#ifndef BTIF_HSAG_SERVICE_NAME
+#define BTIF_HSAG_SERVICE_NAME ("Headset Gateway")
+#endif
+
+#ifndef BTIF_HFAG_SERVICE_NAME
+#define BTIF_HFAG_SERVICE_NAME ("Handsfree Gateway")
+#endif
+
+#ifndef BTIF_HF_SERVICES
+#define BTIF_HF_SERVICES    (BTA_HSP_SERVICE_MASK | BTA_HFP_SERVICE_MASK )
+#endif
+
+#ifndef BTIF_HF_SERVICE_NAMES
+#define BTIF_HF_SERVICE_NAMES {BTIF_HSAG_SERVICE_NAME , BTIF_HFAG_SERVICE_NAME}
+#endif
+
+#ifndef BTIF_HF_SECURITY
+#define BTIF_HF_SECURITY    (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT)
+#endif
+
+#ifndef BTIF_HF_FEATURES
+#define BTIF_HF_FEATURES   ( BTA_AG_FEAT_3WAY | \
+                             BTA_AG_FEAT_ECNR   | \
+                             BTA_AG_FEAT_REJECT | \
+                             BTA_AG_FEAT_ECS    | \
+                             BTA_AG_FEAT_EXTERR | \
+                             BTA_AG_FEAT_BTRH   | \
+                             BTA_AG_FEAT_VREC   | \
+                             BTA_AG_FEAT_UNAT)
+#endif
+
+#define BTIF_HF_ID_1        0
+
+#define BTIF_HF_CALL_END_TIMEOUT       6
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+static bthf_callbacks_t *bt_hf_callbacks = NULL;
+
+#define CHECK_BTHF_INIT() if (bt_hf_callbacks == NULL)\
+    {\
+        BTIF_TRACE_WARNING1("BTHF: %s: BTHF not initialized", __FUNCTION__);\
+        return BT_STATUS_NOT_READY;\
+    }\
+    else\
+    {\
+        BTIF_TRACE_EVENT1("BTHF: %s", __FUNCTION__);\
+    }
+
+#define CHECK_BTHF_SLC_CONNECTED() if (bt_hf_callbacks == NULL)\
+    {\
+        BTIF_TRACE_WARNING1("BTHF: %s: BTHF not initialized", __FUNCTION__);\
+        return BT_STATUS_NOT_READY;\
+    }\
+    else if (btif_hf_cb.state != BTHF_CONNECTION_STATE_SLC_CONNECTED)\
+    {\
+        BTIF_TRACE_WARNING2("BTHF: %s: SLC connection not up. state=%s", __FUNCTION__, dump_hf_conn_state(btif_hf_cb.state));\
+        return BT_STATUS_NOT_READY;\
+    }\
+    else\
+    {\
+        BTIF_TRACE_EVENT1("BTHF: %s", __FUNCTION__);\
+    }
+
+/* BTIF-HF control block to map bdaddr to BTA handle */
+typedef struct _btif_hf_cb
+{
+    UINT16                  handle;
+    bt_bdaddr_t             connected_bda;
+    bthf_connection_state_t state;
+    bthf_vr_state_t         vr_state;
+    tBTA_AG_PEER_FEAT       peer_feat;
+    int                     num_active;
+    int                     num_held;
+    struct timespec         call_end_timestamp;
+    bthf_call_state_t       call_setup_state;
+} btif_hf_cb_t;
+
+static btif_hf_cb_t btif_hf_cb;
+
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+/*******************************************************************************
+**
+** Function         is_connected
+**
+** Description      Internal function to check if HF is connected
+**
+** Returns          TRUE if connected
+**
+*******************************************************************************/
+static BOOLEAN is_connected(bt_bdaddr_t *bd_addr)
+{
+    if (((btif_hf_cb.state == BTHF_CONNECTION_STATE_CONNECTED) || (btif_hf_cb.state == BTHF_CONNECTION_STATE_SLC_CONNECTED))&&
+        ((bd_addr == NULL) || (bdcmp(bd_addr->address, btif_hf_cb.connected_bda.address) == 0)))
+        return TRUE;
+    else
+        return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         callstate_to_callsetup
+**
+** Description      Converts HAL call state to BTA call setup indicator value
+**
+** Returns          BTA call indicator value
+**
+*******************************************************************************/
+static UINT8 callstate_to_callsetup(bthf_call_state_t call_state)
+{
+    UINT8 call_setup = 0;
+    if (call_state == BTHF_CALL_STATE_INCOMING)
+        call_setup = 1;
+    if (call_state == BTHF_CALL_STATE_DIALING)
+        call_setup = 2;
+    if (call_state == BTHF_CALL_STATE_ALERTING)
+        call_setup = 3;
+
+    return call_setup;
+}
+
+/*******************************************************************************
+**
+** Function         send_at_result
+**
+** Description      Send AT result code (OK/ERROR)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void send_at_result(UINT8 ok_flag, UINT16 errcode)
+{
+    tBTA_AG_RES_DATA    ag_res;
+    memset (&ag_res, 0, sizeof (ag_res));
+
+    ag_res.ok_flag = ok_flag;
+    if (ok_flag == BTA_AG_OK_ERROR)
+    {
+        ag_res.errcode = errcode;
+    }
+
+    BTA_AgResult (btif_hf_cb.handle, BTA_AG_UNAT_RES, &ag_res);
+}
+
+/*******************************************************************************
+**
+** Function         send_indicator_update
+**
+** Description      Send indicator update (CIEV)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void send_indicator_update (UINT16 indicator, UINT16 value)
+{
+    tBTA_AG_RES_DATA ag_res;
+
+    memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA));
+    ag_res.ind.id = indicator;
+    ag_res.ind.value = value;
+
+    BTA_AgResult(BTA_AG_HANDLE_ALL, BTA_AG_IND_RES, &ag_res);
+}
+
+void clear_phone_state()
+{
+    btif_hf_cb.call_setup_state = BTHF_CALL_STATE_IDLE;
+    btif_hf_cb.num_active = btif_hf_cb.num_held = 0;
+}
+
+
+/*****************************************************************************
+**   Section name (Group of functions)
+*****************************************************************************/
+
+/*****************************************************************************
+**
+**   btif hf api functions (no context switch)
+**
+*****************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         btif_hf_upstreams_evt
+**
+** Description      Executes HF UPSTREAMS events in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hf_upstreams_evt(UINT16 event, char* p_param)
+{
+    tBTA_AG *p_data = (tBTA_AG *)p_param;
+    bdstr_t bdstr;
+
+    BTIF_TRACE_DEBUG2("%s: event=%s", __FUNCTION__, dump_hf_event(event));
+
+    switch (event)
+    {
+        case BTA_AG_ENABLE_EVT:
+        case BTA_AG_DISABLE_EVT:
+            break;
+
+        case BTA_AG_REGISTER_EVT:
+            btif_hf_cb.handle = p_data->reg.hdr.handle;
+            break;
+
+        case BTA_AG_OPEN_EVT:
+            if (p_data->open.status == BTA_AG_SUCCESS)
+            {
+                bdcpy(btif_hf_cb.connected_bda.address, p_data->open.bd_addr);
+                btif_hf_cb.state = BTHF_CONNECTION_STATE_CONNECTED;
+                btif_hf_cb.peer_feat = 0;
+                clear_phone_state();
+            }
+            else if (btif_hf_cb.state == BTHF_CONNECTION_STATE_CONNECTING)
+            {
+                btif_hf_cb.state = BTHF_CONNECTION_STATE_DISCONNECTED;
+            }
+            else
+            {
+                BTIF_TRACE_WARNING4("%s: AG open failed, but another device connected. status=%d state=%d connected device=%s",
+                        __FUNCTION__, p_data->open.status, btif_hf_cb.state, bd2str(&btif_hf_cb.connected_bda, &bdstr));
+                break;
+            }
+
+            HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb.state, &btif_hf_cb.connected_bda);
+
+            if (btif_hf_cb.state == BTHF_CONNECTION_STATE_DISCONNECTED)
+                bdsetany(btif_hf_cb.connected_bda.address);
+
+            if (p_data->open.status != BTA_AG_SUCCESS)
+                btif_queue_advance();
+            break;
+
+        case BTA_AG_CLOSE_EVT:
+            btif_hf_cb.state = BTHF_CONNECTION_STATE_DISCONNECTED;
+            HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb.state, &btif_hf_cb.connected_bda);
+            bdsetany(btif_hf_cb.connected_bda.address);
+            btif_hf_cb.peer_feat = 0;
+            clear_phone_state();
+            /* If AG_OPEN was received but SLC was not setup in a specified time (10 seconds),
+            ** then AG_CLOSE may be received. We need to advance the queue here
+            */
+            btif_queue_advance();
+            break;
+
+        case BTA_AG_CONN_EVT:
+            btif_hf_cb.peer_feat = p_data->conn.peer_feat;
+            btif_hf_cb.state = BTHF_CONNECTION_STATE_SLC_CONNECTED;
+
+            HAL_CBACK(bt_hf_callbacks, connection_state_cb, btif_hf_cb.state,
+                             &btif_hf_cb.connected_bda);
+            btif_queue_advance();
+            break;
+
+        case BTA_AG_AUDIO_OPEN_EVT:
+            HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_CONNECTED, &btif_hf_cb.connected_bda);
+            break;
+
+        case BTA_AG_AUDIO_CLOSE_EVT:
+            HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_DISCONNECTED, &btif_hf_cb.connected_bda);
+            break;
+
+        /* BTA auto-responds, silently discard */
+        case BTA_AG_SPK_EVT:
+        case BTA_AG_MIC_EVT:
+            HAL_CBACK(bt_hf_callbacks, volume_cmd_cb,
+                (event == BTA_AG_SPK_EVT) ? BTHF_VOLUME_TYPE_SPK : BTHF_VOLUME_TYPE_MIC, p_data->val.num);
+            break;
+
+        case BTA_AG_AT_A_EVT:
+            HAL_CBACK(bt_hf_callbacks, answer_call_cmd_cb);
+            break;
+
+        /* Java needs to send OK/ERROR for these commands */
+        case BTA_AG_AT_BLDN_EVT:
+        case BTA_AG_AT_D_EVT:
+            HAL_CBACK(bt_hf_callbacks, dial_call_cmd_cb,
+                (event == BTA_AG_AT_D_EVT) ? p_data->val.str : NULL);
+            break;
+
+        case BTA_AG_AT_CHUP_EVT:
+            HAL_CBACK(bt_hf_callbacks, hangup_call_cmd_cb);
+            break;
+
+        case BTA_AG_AT_CIND_EVT:
+            HAL_CBACK(bt_hf_callbacks, cind_cmd_cb);
+            break;
+
+        case BTA_AG_AT_VTS_EVT:
+            HAL_CBACK(bt_hf_callbacks, dtmf_cmd_cb, p_data->val.str[0]);
+            break;
+
+        case BTA_AG_AT_BVRA_EVT:
+            HAL_CBACK(bt_hf_callbacks, vr_cmd_cb,
+                (p_data->val.num == 1) ? BTHF_VR_STATE_STARTED : BTHF_VR_STATE_STOPPED);
+            break;
+
+        case BTA_AG_AT_NREC_EVT:
+            HAL_CBACK(bt_hf_callbacks, nrec_cmd_cb,
+                (p_data->val.num == 1) ? BTHF_NREC_START : BTHF_NREC_STOP);
+            break;
+
+        /* TODO: Add a callback for CBC */
+        case BTA_AG_AT_CBC_EVT:
+            break;
+
+        case BTA_AG_AT_CKPD_EVT:
+            HAL_CBACK(bt_hf_callbacks, key_pressed_cmd_cb);
+            break;
+
+        /* Java needs to send OK/ERROR for these commands */
+        case BTA_AG_AT_CHLD_EVT:
+            HAL_CBACK(bt_hf_callbacks, chld_cmd_cb, atoi(p_data->val.str));
+            break;
+
+        case BTA_AG_AT_CLCC_EVT:
+            HAL_CBACK(bt_hf_callbacks, clcc_cmd_cb, p_data->val.num);
+            break;
+
+        case BTA_AG_AT_COPS_EVT:
+            HAL_CBACK(bt_hf_callbacks, cops_cmd_cb);
+            break;
+
+        case BTA_AG_AT_UNAT_EVT:
+            HAL_CBACK(bt_hf_callbacks, unknown_at_cmd_cb,
+                             p_data->val.str);
+            break;
+
+        case BTA_AG_AT_CNUM_EVT:
+            HAL_CBACK(bt_hf_callbacks, cnum_cmd_cb);
+            break;
+
+        /* TODO: Some of these commands may need to be sent to app. For now respond with error */
+        case BTA_AG_AT_BINP_EVT:
+        case BTA_AG_AT_BTRH_EVT:
+            send_at_result(BTA_AG_OK_ERROR, BTA_AG_ERR_OP_NOT_SUPPORTED);
+            break;
+
+
+        default:
+            BTIF_TRACE_WARNING2("%s: Unhandled event: %d", __FUNCTION__, event);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bte_hf_evt
+**
+** Description      Switches context from BTE to BTIF for all HF events
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void bte_hf_evt(tBTA_AG_EVT event, tBTA_AG *p_data)
+{
+    bt_status_t status;
+    int param_len = 0;
+
+    /* TODO: BTA sends the union members and not tBTA_AG. If using param_len=sizeof(tBTA_AG), we get a crash on memcpy */
+    if (BTA_AG_REGISTER_EVT == event)
+        param_len = sizeof(tBTA_AG_REGISTER);
+    else if (BTA_AG_OPEN_EVT == event)
+        param_len = sizeof(tBTA_AG_OPEN);
+    else if (BTA_AG_CONN_EVT == event)
+        param_len = sizeof(tBTA_AG_CONN);
+    else if ( (BTA_AG_CLOSE_EVT == event) || (BTA_AG_AUDIO_OPEN_EVT == event) || (BTA_AG_AUDIO_CLOSE_EVT == event))
+        param_len = sizeof(tBTA_AG_HDR);
+    else if (p_data)
+        param_len = sizeof(tBTA_AG_VAL);
+
+    /* switch context to btif task context (copy full union size for convenience) */
+    status = btif_transfer_context(btif_hf_upstreams_evt, (uint16_t)event, (void*)p_data, param_len, NULL);
+
+    /* catch any failed context transfers */
+    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_in_hf_generic_evt
+**
+** Description     Processes generic events to be sent to JNI that are not triggered from the BTA.
+**                      Always runs in BTIF context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_in_hf_generic_evt(UINT16 event, char *p_param)
+{
+    BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+    switch (event) {
+        case BTIF_HFP_CB_AUDIO_CONNECTING:
+        {
+            HAL_CBACK(bt_hf_callbacks, audio_state_cb, BTHF_AUDIO_STATE_CONNECTING,
+                      &btif_hf_cb.connected_bda);
+        } break;
+        default:
+        {
+            BTIF_TRACE_WARNING2("%s : Unknown event 0x%x", __FUNCTION__, event);
+        }
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hf_init
+**
+** Description     initializes the hf interface
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t init( bthf_callbacks_t* callbacks )
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    bt_hf_callbacks = callbacks;
+
+    /* Invoke the enable service API to the core to set the appropriate service_id
+     * Internally, the HSP_SERVICE_ID shall also be enabled if HFP is enabled (phone)
+     * othwerwise only HSP is enabled (tablet)
+    */
+#if (defined(BTIF_HF_SERVICES) && (BTIF_HF_SERVICES & BTA_HFP_SERVICE_MASK))
+    btif_enable_service(BTA_HFP_SERVICE_ID);
+#else
+    btif_enable_service(BTA_HSP_SERVICE_ID);
+#endif
+
+    memset(&btif_hf_cb, 0, sizeof(btif_hf_cb_t));
+    clear_phone_state();
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         connect
+**
+** Description     connect to headset
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t connect_int( bt_bdaddr_t *bd_addr )
+{
+    if (!is_connected(bd_addr))
+    {
+        btif_hf_cb.state = BTHF_CONNECTION_STATE_CONNECTING;
+        bdcpy(btif_hf_cb.connected_bda.address, bd_addr->address);
+
+        BTA_AgOpen(btif_hf_cb.handle, btif_hf_cb.connected_bda.address,
+                   BTIF_HF_SECURITY, BTIF_HF_SERVICES);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_BUSY;
+}
+
+static bt_status_t connect( bt_bdaddr_t *bd_addr )
+{
+    CHECK_BTHF_INIT();
+    return btif_queue_connect(UUID_SERVCLASS_AG_HANDSFREE, bd_addr, connect_int);
+}
+
+/*******************************************************************************
+**
+** Function         disconnect
+**
+** Description      disconnect from headset
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t disconnect( bt_bdaddr_t *bd_addr )
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(bd_addr))
+    {
+        BTA_AgClose(btif_hf_cb.handle);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         connect_audio
+**
+** Description     create an audio connection
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t connect_audio( bt_bdaddr_t *bd_addr )
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(bd_addr))
+    {
+        BTA_AgAudioOpen(btif_hf_cb.handle);
+
+        /* Inform the application that the audio connection has been initiated successfully */
+        btif_transfer_context(btif_in_hf_generic_evt, BTIF_HFP_CB_AUDIO_CONNECTING,
+                              (char *)bd_addr, sizeof(bt_bdaddr_t), NULL);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         disconnect_audio
+**
+** Description      close the audio connection
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t disconnect_audio( bt_bdaddr_t *bd_addr )
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(bd_addr))
+    {
+        BTA_AgAudioClose(btif_hf_cb.handle);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         start_voice_recognition
+**
+** Description      start voice recognition
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t start_voice_recognition()
+{
+    CHECK_BTHF_INIT();
+    if (is_connected(NULL))
+    {
+        if (btif_hf_cb.peer_feat & BTA_AG_PEER_FEAT_VREC)
+        {
+            tBTA_AG_RES_DATA ag_res;
+            memset(&ag_res, 0, sizeof(ag_res));
+            ag_res.state = 1;
+            BTA_AgResult (btif_hf_cb.handle, BTA_AG_BVRA_RES, &ag_res);
+
+            return BT_STATUS_SUCCESS;
+        }
+        else
+        {
+            return BT_STATUS_UNSUPPORTED;
+        }
+    }
+
+    return BT_STATUS_NOT_READY;
+}
+
+/*******************************************************************************
+**
+** Function         stop_voice_recognition
+**
+** Description      stop voice recognition
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t stop_voice_recognition()
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        if (btif_hf_cb.peer_feat & BTA_AG_PEER_FEAT_VREC)
+        {
+            tBTA_AG_RES_DATA ag_res;
+            memset(&ag_res, 0, sizeof(ag_res));
+            ag_res.state = 0;
+            BTA_AgResult (btif_hf_cb.handle, BTA_AG_BVRA_RES, &ag_res);
+
+            return BT_STATUS_SUCCESS;
+        }
+        else
+        {
+            return BT_STATUS_UNSUPPORTED;
+        }
+    }
+
+    return BT_STATUS_NOT_READY;
+}
+
+/*******************************************************************************
+**
+** Function         volume_control
+**
+** Description      volume control
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t volume_control(bthf_volume_type_t type, int volume)
+{
+    CHECK_BTHF_INIT();
+
+    tBTA_AG_RES_DATA ag_res;
+    memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA));
+    if (is_connected(NULL))
+    {
+        ag_res.num = volume;
+        BTA_AgResult(btif_hf_cb.handle,
+                     (type == BTHF_VOLUME_TYPE_SPK) ? BTA_AG_SPK_RES : BTA_AG_MIC_RES,
+                     &ag_res);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         device_status_notification
+**
+** Description      Combined device status change notification
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t device_status_notification(bthf_network_state_t ntk_state,
+                          bthf_service_type_t svc_type, int signal, int batt_chg)
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        /* send all indicators to BTA.
+        ** BTA will make sure no duplicates are sent out
+        */
+        send_indicator_update(BTA_AG_IND_SERVICE,
+                              (ntk_state == BTHF_NETWORK_STATE_AVAILABLE) ? 1 : 0);
+        send_indicator_update(BTA_AG_IND_ROAM,
+                             (svc_type == BTHF_SERVICE_TYPE_HOME) ? 0 : 1);
+        send_indicator_update(BTA_AG_IND_SIGNAL, signal);
+        send_indicator_update(BTA_AG_IND_BATTCHG, batt_chg);
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         cops_response
+**
+** Description      Response for COPS command
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t cops_response(const char *cops)
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        tBTA_AG_RES_DATA    ag_res;
+
+        /* Format the response */
+        sprintf (ag_res.str, "0,0,\"%s\"", cops);
+        ag_res.ok_flag = BTA_AG_OK_DONE;
+
+        BTA_AgResult (btif_hf_cb.handle, BTA_AG_COPS_RES, &ag_res);
+        return BT_STATUS_SUCCESS;
+    }
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         cind_response
+**
+** Description      Response for CIND command
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t cind_response(int svc, int num_active, int num_held,
+                                     bthf_call_state_t call_setup_state,
+                                     int signal, int roam, int batt_chg)
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        tBTA_AG_RES_DATA    ag_res;
+
+        memset (&ag_res, 0, sizeof (ag_res));
+        /* per the errata 2043, call=1 implies atleast one call is in progress (active/held)
+        ** https://www.bluetooth.org/errata/errata_view.cfm?errata_id=2043
+        **/
+        sprintf (ag_res.str, "%d,%d,%d,%d,%d,%d,%d",
+                (num_active + num_held) ? 1 : 0,                       /* Call state */
+                callstate_to_callsetup(call_setup_state),              /* Callsetup state */
+                svc,                                                   /* network service */
+                signal,                                                /* Signal strength */
+                roam,                                                  /* Roaming indicator */
+                batt_chg,                                              /* Battery level */
+                ((num_held == 0) ? 0 : ((num_active == 0) ? 2 : 1))); /* Call held */
+
+        BTA_AgResult (btif_hf_cb.handle, BTA_AG_CIND_RES, &ag_res);
+
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         formatted_at_response
+**
+** Description      Pre-formatted AT response, typically in response to unknown AT cmd
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t formatted_at_response(const char *rsp)
+{
+    CHECK_BTHF_INIT();
+    tBTA_AG_RES_DATA    ag_res;
+
+    if (is_connected(NULL))
+    {
+        /* Format the response and send */
+        memset (&ag_res, 0, sizeof (ag_res));
+        strncpy(ag_res.str, rsp, BTA_AG_AT_MAX_LEN);
+        BTA_AgResult (btif_hf_cb.handle, BTA_AG_UNAT_RES, &ag_res);
+
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         at_response
+**
+** Description      ok/error response
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t at_response(bthf_at_response_t response_code, int error_code)
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        send_at_result((response_code == BTHF_AT_RESPONSE_OK) ? BTA_AG_OK_DONE
+                        : BTA_AG_OK_ERROR, error_code);
+        return BT_STATUS_SUCCESS;
+    }
+
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         clcc_response
+**
+** Description      response for CLCC command
+**                  Can be iteratively called for each call index. Call index
+**                  of 0 will be treated as NULL termination (Completes response)
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static bt_status_t clcc_response(int index, bthf_call_direction_t dir,
+                                bthf_call_state_t state, bthf_call_mode_t mode,
+                                bthf_call_mpty_type_t mpty, const char *number,
+                                bthf_call_addrtype_t type)
+{
+    CHECK_BTHF_INIT();
+
+    if (is_connected(NULL))
+    {
+        tBTA_AG_RES_DATA    ag_res;
+        int                 xx;
+
+        memset (&ag_res, 0, sizeof (ag_res));
+
+        /* Format the response */
+        if (index == 0)
+        {
+            ag_res.ok_flag = BTA_AG_OK_DONE;
+        }
+        else
+        {
+            BTIF_TRACE_EVENT6("clcc_response: [%d] dir %d state %d mode %d number = %s type = %d",
+                          index, dir, state, mode, number, type);
+            xx = sprintf (ag_res.str, "%d,%d,%d,%d,%d",
+                         index, dir, state, mode, mpty);
+
+            if (number)
+            {
+                if ((type == BTHF_CALL_ADDRTYPE_INTERNATIONAL) && (*number != '+'))
+                    sprintf (&ag_res.str[xx], ",\"+%s\",%d", number, type);
+                else
+                    sprintf (&ag_res.str[xx], ",\"%s\",%d", number, type);
+            }
+        }
+        BTA_AgResult (btif_hf_cb.handle, BTA_AG_CLCC_RES, &ag_res);
+
+        return BT_STATUS_SUCCESS;
+    }
+
+    return BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         phone_state_change
+**
+** Description      notify of a call state change
+**                  number & type: valid only for incoming & waiting call
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+
+static bt_status_t phone_state_change(int num_active, int num_held, bthf_call_state_t call_setup_state,
+                                            const char *number, bthf_call_addrtype_t type)
+{
+    tBTA_AG_RES res = 0xff;
+    tBTA_AG_RES_DATA ag_res;
+    bt_status_t status = BT_STATUS_SUCCESS;
+    BOOLEAN activeCallUpdated = FALSE;
+
+    CHECK_BTHF_SLC_CONNECTED();
+
+    BTIF_TRACE_DEBUG6("phone_state_change: num_active=%d [prev: %d]  num_held=%d[prev: %d]"\
+                      " call_setup=%s [prev: %s]", num_active, btif_hf_cb.num_active,
+                       num_held, btif_hf_cb.num_held,
+                       dump_hf_call_state(call_setup_state), dump_hf_call_state(btif_hf_cb.call_setup_state));
+
+    /* if all indicators are 0, send end call and return */
+    if (num_active == 0 && num_held == 0 && call_setup_state == BTHF_CALL_STATE_IDLE)
+    {
+        BTIF_TRACE_DEBUG1("%s: Phone on hook", __FUNCTION__);
+
+        /* record call termination timestamp  if  there was an active/held call  or callsetup state > BTHF_CALL_STATE_IDLE */
+        if ((btif_hf_cb.call_setup_state != BTHF_CALL_STATE_IDLE ) || (btif_hf_cb.num_active) ||(btif_hf_cb.num_held))
+        {
+            BTIF_TRACE_DEBUG1("%s: Record call termination timestamp", __FUNCTION__);
+            clock_gettime(CLOCK_MONOTONIC, &btif_hf_cb.call_end_timestamp);
+        }
+        BTA_AgResult (BTA_AG_HANDLE_ALL, BTA_AG_END_CALL_RES, NULL);
+
+        /* if held call was present, reset that as well */
+        if (btif_hf_cb.num_held)
+            send_indicator_update(BTA_AG_IND_CALLHELD, 0);
+
+        goto update_call_states;
+    }
+
+    /* active state can change when:
+    ** 1. an outgoing/incoming call was answered
+    ** 2. an held was resumed
+    ** 3. without callsetup notifications, call became active
+    ** (3) can happen if call is active and a headset connects to us
+    **
+    ** In the case of (3), we will have to notify the stack of an active
+    ** call, instead of sending an indicator update. This will also
+    ** force the SCO to be setup. Handle this special case here prior to
+    ** call setup handling
+    */
+    if ( (num_active == 1) && (btif_hf_cb.num_active == 0) && (btif_hf_cb.num_held == 0) &&
+         (btif_hf_cb.call_setup_state == BTHF_CALL_STATE_IDLE) )
+    {
+        BTIF_TRACE_DEBUG1("%s: Active call notification received without call setup update",
+                          __FUNCTION__);
+
+        memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA));
+        ag_res.audio_handle = btif_hf_cb.handle;
+        res = BTA_AG_OUT_CALL_CONN_RES;
+        BTA_AgResult(BTA_AG_HANDLE_ALL, res, &ag_res);
+        activeCallUpdated = TRUE;
+    }
+
+    /* Ringing call changed? */
+    if (call_setup_state != btif_hf_cb.call_setup_state)
+    {
+        BTIF_TRACE_DEBUG3("%s: Call setup states changed. old: %s new: %s",
+            __FUNCTION__, dump_hf_call_state(btif_hf_cb.call_setup_state),
+            dump_hf_call_state(call_setup_state));
+        memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA));
+
+        switch (call_setup_state)
+        {
+            case BTHF_CALL_STATE_IDLE:
+            {
+                switch (btif_hf_cb.call_setup_state)
+                {
+                    case BTHF_CALL_STATE_INCOMING:
+                        if (num_active > btif_hf_cb.num_active)
+                        {
+                            res = BTA_AG_IN_CALL_CONN_RES;
+                            ag_res.audio_handle = btif_hf_cb.handle;
+                        }
+                        else if (num_held > btif_hf_cb.num_held)
+                            res = BTA_AG_IN_CALL_HELD_RES;
+                        else
+                            res = BTA_AG_CALL_CANCEL_RES;
+                        break;
+                    case BTHF_CALL_STATE_DIALING:
+                    case BTHF_CALL_STATE_ALERTING:
+                        if (num_active > btif_hf_cb.num_active)
+                        {
+                            ag_res.audio_handle = BTA_AG_HANDLE_SCO_NO_CHANGE;
+                            res = BTA_AG_OUT_CALL_CONN_RES;
+                        }
+                        else
+                            res = BTA_AG_CALL_CANCEL_RES;
+                        break;
+                    default:
+                        BTIF_TRACE_ERROR1("%s: Incorrect Call setup state transition", __FUNCTION__);
+                        status = BT_STATUS_PARM_INVALID;
+                        break;
+                }
+            } break;
+
+            case BTHF_CALL_STATE_INCOMING:
+                if (num_active || num_held)
+                    res = BTA_AG_CALL_WAIT_RES;
+                else
+                    res = BTA_AG_IN_CALL_RES;
+                if (number)
+                {
+                    int xx = 0;
+                    if ((type == BTHF_CALL_ADDRTYPE_INTERNATIONAL) && (*number != '+'))
+                        xx = sprintf (ag_res.str, "\"+%s\"", number);
+                    else
+                        xx = sprintf (ag_res.str, "\"%s\"", number);
+                    ag_res.num = type;
+
+                    if (res == BTA_AG_CALL_WAIT_RES)
+                        sprintf(&ag_res.str[xx], ",%d", type);
+                }
+                break;
+            case BTHF_CALL_STATE_DIALING:
+                ag_res.audio_handle = btif_hf_cb.handle;
+                res = BTA_AG_OUT_CALL_ORIG_RES;
+                break;
+            case BTHF_CALL_STATE_ALERTING:
+                /* if we went from idle->alert, force SCO setup here. dialing usually triggers it */
+                if (btif_hf_cb.call_setup_state == BTHF_CALL_STATE_IDLE)
+                ag_res.audio_handle = btif_hf_cb.handle;
+                res = BTA_AG_OUT_CALL_ALERT_RES;
+                break;
+            default:
+                BTIF_TRACE_ERROR1("%s: Incorrect new ringing call state", __FUNCTION__);
+                status = BT_STATUS_PARM_INVALID;
+                break;
+        }
+        BTIF_TRACE_DEBUG3("%s: Call setup state changed. res=%d, audio_handle=%d", __FUNCTION__, res, ag_res.audio_handle);
+
+        if (res)
+            BTA_AgResult(BTA_AG_HANDLE_ALL, res, &ag_res);
+
+        /* if call setup is idle, we have already updated call indicator, jump out */
+        if (call_setup_state == BTHF_CALL_STATE_IDLE)
+        {
+            /* check & update callheld */
+            if ((num_held > 0) && (num_active > 0))
+                send_indicator_update(BTA_AG_IND_CALLHELD, 1);
+            goto update_call_states;
+        }
+    }
+
+    memset(&ag_res, 0, sizeof(tBTA_AG_RES_DATA));
+
+    /* per the errata 2043, call=1 implies atleast one call is in progress (active/held)
+    ** https://www.bluetooth.org/errata/errata_view.cfm?errata_id=2043
+    ** Handle call indicator change
+    **/
+    if (!activeCallUpdated && ((num_active + num_held) != (btif_hf_cb.num_active + btif_hf_cb.num_held)) )
+    {
+        BTIF_TRACE_DEBUG3("%s: Active call states changed. old: %d new: %d", __FUNCTION__, btif_hf_cb.num_active, num_active);
+        send_indicator_update(BTA_AG_IND_CALL, ((num_active + num_held) > 0) ? 1 : 0);
+    }
+
+    /* Held Changed? */
+    if (num_held != btif_hf_cb.num_held)
+    {
+        BTIF_TRACE_DEBUG3("%s: Held call states changed. old: %d new: %d", __FUNCTION__, btif_hf_cb.num_held, num_held);
+        send_indicator_update(BTA_AG_IND_CALLHELD, ((num_held == 0) ? 0 : ((num_active == 0) ? 2 : 1)));
+    }
+
+    /* Calls Swapped? */
+    if ( (call_setup_state == btif_hf_cb.call_setup_state) &&
+         (num_active && num_held) &&
+         (num_active == btif_hf_cb.num_active) &&
+         (num_held == btif_hf_cb.num_held) )
+    {
+        BTIF_TRACE_DEBUG1("%s: Calls swapped", __FUNCTION__);
+        send_indicator_update(BTA_AG_IND_CALLHELD, 1);
+    }
+
+update_call_states:
+    btif_hf_cb.num_active = num_active;
+    btif_hf_cb.num_held = num_held;
+    btif_hf_cb.call_setup_state = call_setup_state;
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hf_call_terminated_recently
+**
+** Description      Checks if a call has been terminated
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+BOOLEAN btif_hf_call_terminated_recently()
+{
+      struct timespec         now;
+
+      clock_gettime(CLOCK_MONOTONIC, &now);
+      if (now.tv_sec < btif_hf_cb.call_end_timestamp.tv_sec + BTIF_HF_CALL_END_TIMEOUT)
+      {
+          return TRUE;
+      }
+      else
+      {
+          btif_hf_cb.call_end_timestamp.tv_sec = 0;
+          return FALSE;
+      }
+}
+
+/*******************************************************************************
+**
+** Function         cleanup
+**
+** Description      Closes the HF interface
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static void  cleanup( void )
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    if (bt_hf_callbacks)
+    {
+        btif_disable_service(BTA_HFP_SERVICE_ID);
+        bt_hf_callbacks = NULL;
+    }
+}
+
+static const bthf_interface_t bthfInterface = {
+    sizeof(bt_interface_t),
+    init,
+    connect,
+    disconnect,
+    connect_audio,
+    disconnect_audio,
+    start_voice_recognition,
+    stop_voice_recognition,
+    volume_control,
+    device_status_notification,
+    cops_response,
+    cind_response,
+    formatted_at_response,
+    at_response,
+    clcc_response,
+    phone_state_change,
+    cleanup,
+};
+
+/*******************************************************************************
+**
+** Function         btif_hf_execute_service
+**
+** Description      Initializes/Shuts down the service
+**
+** Returns          BT_STATUS_SUCCESS on success, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_hf_execute_service(BOOLEAN b_enable)
+{
+     char * p_service_names[] = BTIF_HF_SERVICE_NAMES;
+     if (b_enable)
+     {
+          /* Enable and register with BTA-AG */
+          BTA_AgEnable (BTA_AG_PARSE, bte_hf_evt);
+          BTA_AgRegister(BTIF_HF_SERVICES, BTIF_HF_SECURITY, BTIF_HF_FEATURES,
+                         p_service_names, BTIF_HF_ID_1);
+     }
+     else {
+         /* De-register AG */
+         BTA_AgDeregister(btif_hf_cb.handle);
+         /* Disable AG */
+         BTA_AgDisable();
+     }
+     return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hf_get_interface
+**
+** Description      Get the hf callback interface
+**
+** Returns          bthf_interface_t
+**
+*******************************************************************************/
+const bthf_interface_t *btif_hf_get_interface()
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    return &bthfInterface;
+}
diff --git a/btif/src/btif_hh.c b/btif/src/btif_hh.c
new file mode 100644
index 0000000..61432b8
--- /dev/null
+++ b/btif/src/btif_hh.c
@@ -0,0 +1,1630 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hh.c
+ *
+ *  Description:   HID Host Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hh.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+
+#define LOG_TAG "BTIF_HH"
+
+#include "bta_api.h"
+#include "bta_hh_api.h"
+#include "bd.h"
+#include "btif_storage.h"
+
+#include "btif_common.h"
+#include "btif_util.h"
+#include "btif_hh.h"
+#include "gki.h"
+#include "l2c_api.h"
+
+
+#define BTIF_HH_APP_ID_MI       0x01
+#define BTIF_HH_APP_ID_KB       0x02
+
+#define COD_HID_KEYBOARD  0x0540
+#define COD_HID_POINTING  0x0580
+#define COD_HID_COMBO     0x05C0
+
+#define KEYSTATE_FILEPATH "/data/misc/bluedroid/bt_hh_ks" //keep this in sync with HID host jni
+
+#define HID_REPORT_CAPSLOCK   0x39
+#define HID_REPORT_NUMLOCK    0x53
+#define HID_REPORT_SCROLLLOCK 0x47
+
+//For Apple Magic Mouse
+#define MAGICMOUSE_VENDOR_ID 0x05ac
+#define MAGICMOUSE_PRODUCT_ID 0x030d
+
+#define LOGITECH_KB_MX5500_VENDOR_ID  0x046D
+#define LOGITECH_KB_MX5500_PRODUCT_ID 0xB30B
+
+extern const int BT_UID;
+extern const int BT_GID;
+static int btif_hh_prev_keyevents=0; //The previous key events
+static int btif_hh_keylockstates=0; //The current key state of each key
+
+#define BTIF_HH_ID_1        0
+#define BTIF_HH_DEV_DISCONNECTED 3
+
+
+#ifndef BTUI_HH_SECURITY
+#define BTUI_HH_SECURITY (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT)
+#endif
+
+#ifndef BTUI_HH_MOUSE_SECURITY
+#define BTUI_HH_MOUSE_SECURITY (BTA_SEC_NONE)
+#endif
+
+/* HH request events */
+typedef enum
+{
+    BTIF_HH_CONNECT_REQ_EVT = 0,
+    BTIF_HH_DISCONNECT_REQ_EVT,
+    BTIF_HH_VUP_REQ_EVT
+} btif_hh_req_evt_t;
+
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+#define BTIF_HH_SERVICES    (BTA_HID_SERVICE_MASK)
+
+
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+typedef struct hid_kb_list
+{
+    UINT16 product_id;
+    UINT16 version_id;
+    char*  kb_name;
+} tHID_KB_LIST;
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+btif_hh_cb_t btif_hh_cb;
+
+static bthh_callbacks_t *bt_hh_callbacks = NULL;
+
+/* List of HID keyboards for which the NUMLOCK state needs to be
+ * turned ON by default. Add devices to this list to apply the
+ * NUMLOCK state toggle on fpr first connect.*/
+static tHID_KB_LIST hid_kb_numlock_on_list[] =
+{
+    {LOGITECH_KB_MX5500_PRODUCT_ID,
+    LOGITECH_KB_MX5500_VENDOR_ID,
+    "Logitech MX5500 Keyboard"}
+};
+
+
+#define CHECK_BTHH_INIT() if (bt_hh_callbacks == NULL)\
+    {\
+        BTIF_TRACE_WARNING1("BTHH: %s: BTHH not initialized", __FUNCTION__);\
+        return BT_STATUS_NOT_READY;\
+    }\
+    else\
+    {\
+        BTIF_TRACE_EVENT1("BTHH: %s", __FUNCTION__);\
+    }
+
+
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+extern void bta_hh_co_destroy(int fd);
+extern void bta_hh_co_write(int fd, UINT8* rpt, UINT16 len);
+extern bt_status_t btif_dm_remove_bond(const bt_bdaddr_t *bd_addr);
+extern void bta_hh_co_send_hid_info(btif_hh_device_t *p_dev, char *dev_name, UINT16 vendor_id,
+                                    UINT16 product_id, UINT16 version, UINT8 ctry_code,
+                                    int dscp_len, UINT8 *p_dscp);
+extern BOOLEAN check_cod(const bt_bdaddr_t *remote_bdaddr, uint32_t cod);
+extern void btif_dm_cb_remove_bond(bt_bdaddr_t *bd_addr);
+extern int  scru_ascii_2_hex(char *p_ascii, int len, UINT8 *p_hex);
+
+/*****************************************************************************
+**  Local Function prototypes
+*****************************************************************************/
+static void set_keylockstate(int keymask, BOOLEAN isSet);
+static void toggle_os_keylockstates(int fd, int changedkeystates);
+static void sync_lockstate_on_connect(btif_hh_device_t *p_dev);
+//static void hh_update_keyboard_lockstates(btif_hh_device_t *p_dev);
+
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+static int get_keylockstates()
+{
+    return btif_hh_keylockstates;
+}
+
+static void set_keylockstate(int keymask, BOOLEAN isSet)
+{
+    if(isSet)
+        btif_hh_keylockstates |= keymask;
+}
+
+/*******************************************************************************
+**
+** Function         toggle_os_keylockstates
+**
+** Description      Function to toggle the keyboard lock states managed by the linux.
+**                  This function is used in by two call paths
+**                  (1) if the lock state change occurred from an onscreen keyboard,
+**                  this function is called to update the lock state maintained
+                    for the HID keyboard(s)
+**                  (2) if a HID keyboard is disconnected and reconnected,
+**                  this function is called to update the lock state maintained
+                    for the HID keyboard(s)
+** Returns          void
+*******************************************************************************/
+
+static void toggle_os_keylockstates(int fd, int changedlockstates)
+{
+    BTIF_TRACE_EVENT3("%s: fd = %d, changedlockstates = 0x%x",
+        __FUNCTION__, fd, changedlockstates);
+    UINT8 hidreport[9];
+    int reportIndex;
+    memset(hidreport,0,9);
+    hidreport[0]=1;
+    reportIndex=4;
+
+    if (changedlockstates & BTIF_HH_KEYSTATE_MASK_CAPSLOCK) {
+        BTIF_TRACE_DEBUG1("%s Setting CAPSLOCK", __FUNCTION__);
+        hidreport[reportIndex++] = (UINT8)HID_REPORT_CAPSLOCK;
+    }
+
+    if (changedlockstates & BTIF_HH_KEYSTATE_MASK_NUMLOCK)  {
+        BTIF_TRACE_DEBUG1("%s Setting NUMLOCK", __FUNCTION__);
+        hidreport[reportIndex++] = (UINT8)HID_REPORT_NUMLOCK;
+    }
+
+    if (changedlockstates & BTIF_HH_KEYSTATE_MASK_SCROLLLOCK) {
+        BTIF_TRACE_DEBUG1("%s Setting SCROLLLOCK", __FUNCTION__);
+        hidreport[reportIndex++] = (UINT8) HID_REPORT_SCROLLLOCK;
+    }
+
+     BTIF_TRACE_DEBUG4("Writing hidreport #1 to os: "\
+        "%s:  %x %x %x", __FUNCTION__,
+         hidreport[0], hidreport[1], hidreport[2]);
+    BTIF_TRACE_DEBUG4("%s:  %x %x %x", __FUNCTION__,
+         hidreport[3], hidreport[4], hidreport[5]);
+    BTIF_TRACE_DEBUG4("%s:  %x %x %x", __FUNCTION__,
+         hidreport[6], hidreport[7], hidreport[8]);
+    bta_hh_co_write(fd , hidreport, sizeof(hidreport));
+    usleep(200000);
+    memset(hidreport,0,9);
+    hidreport[0]=1;
+    BTIF_TRACE_DEBUG4("Writing hidreport #2 to os: "\
+       "%s:  %x %x %x", __FUNCTION__,
+         hidreport[0], hidreport[1], hidreport[2]);
+    BTIF_TRACE_DEBUG4("%s:  %x %x %x", __FUNCTION__,
+         hidreport[3], hidreport[4], hidreport[5]);
+    BTIF_TRACE_DEBUG4("%s:  %x %x %x ", __FUNCTION__,
+         hidreport[6], hidreport[7], hidreport[8]);
+    bta_hh_co_write(fd , hidreport, sizeof(hidreport));
+}
+
+/*******************************************************************************
+**
+** Function         update_keyboard_lockstates
+**
+** Description      Sends a report to the keyboard to set the lock states of keys
+**
+*******************************************************************************/
+static void update_keyboard_lockstates(btif_hh_device_t *p_dev)
+{
+    UINT8 len = 2;  /* reportid + 1 byte report*/
+    BD_ADDR* bda;
+
+    /* Set report for other keyboards */
+    BTIF_TRACE_EVENT3("%s: setting report on dev_handle %d to 0x%x",
+         __FUNCTION__, p_dev->dev_handle, btif_hh_keylockstates);
+
+    if (p_dev->p_buf != NULL) {
+        GKI_freebuf(p_dev->p_buf);
+    }
+    /* Get SetReport buffer */
+    p_dev->p_buf = GKI_getbuf((UINT16) (len + BTA_HH_MIN_OFFSET +
+        sizeof(BT_HDR)));
+    if (p_dev->p_buf != NULL) {
+        p_dev->p_buf->len = len;
+        p_dev->p_buf->offset = BTA_HH_MIN_OFFSET;
+
+        /* LED status updated by data event */
+        UINT8 *pbuf_data  = (UINT8 *)(p_dev->p_buf + 1)
+            + p_dev->p_buf->offset;
+        pbuf_data[0]=0x01; /*report id */
+        pbuf_data[1]=btif_hh_keylockstates; /*keystate*/
+        bda = (BD_ADDR*) (&p_dev->bd_addr);
+        BTA_HhSendData(p_dev->dev_handle, *bda,
+            p_dev->p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         sync_lockstate_on_connect
+**
+** Description      Function to update the keyboard lock states managed by the OS
+**                  when a HID keyboard is connected or disconnected and reconnected
+** Returns          void
+*******************************************************************************/
+static void sync_lockstate_on_connect(btif_hh_device_t *p_dev)
+{
+    int keylockstates;
+
+    BTIF_TRACE_EVENT1("%s: Syncing keyboard lock states after "\
+        "reconnect...",__FUNCTION__);
+    /*If the device is connected, update keyboard state */
+    update_keyboard_lockstates(p_dev);
+
+    /*Check if the lockstate of caps,scroll,num is set.
+     If so, send a report to the kernel
+    so the lockstate is in sync */
+    keylockstates = get_keylockstates();
+    if (keylockstates)
+    {
+        BTIF_TRACE_DEBUG2("%s: Sending hid report to kernel "\
+            "indicating lock key state 0x%x",__FUNCTION__,
+            keylockstates);
+        usleep(200000);
+        toggle_os_keylockstates(p_dev->fd, keylockstates);
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG2("%s: NOT sending hid report to kernel "\
+            "indicating lock key state 0x%x",__FUNCTION__,
+            keylockstates);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_find_dev_by_handle
+**
+** Description      Return the device pointer of the specified device handle
+**
+** Returns          Device entry pointer in the device table
+*******************************************************************************/
+static btif_hh_device_t *btif_hh_find_dev_by_handle(UINT8 handle)
+{
+    UINT32 i;
+    // LOGV("%s: handle = %d", __FUNCTION__, handle);
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+        if (btif_hh_cb.devices[i].dev_status != BTHH_CONN_STATE_UNKNOWN &&
+            btif_hh_cb.devices[i].dev_handle == handle)
+        {
+            return &btif_hh_cb.devices[i];
+        }
+    }
+    return NULL;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hh_find_connected_dev_by_handle
+**
+** Description      Return the connected device pointer of the specified device handle
+**
+** Returns          Device entry pointer in the device table
+*******************************************************************************/
+btif_hh_device_t *btif_hh_find_connected_dev_by_handle(UINT8 handle)
+{
+    UINT32 i;
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+        if (btif_hh_cb.devices[i].dev_status == BTHH_CONN_STATE_CONNECTED &&
+            btif_hh_cb.devices[i].dev_handle == handle)
+        {
+            return &btif_hh_cb.devices[i];
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_find_dev_by_bda
+**
+** Description      Return the device pointer of the specified bt_bdaddr_t.
+**
+** Returns          Device entry pointer in the device table
+*******************************************************************************/
+static btif_hh_device_t *btif_hh_find_dev_by_bda(bt_bdaddr_t *bd_addr)
+{
+    UINT32 i;
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+        if (btif_hh_cb.devices[i].dev_status != BTHH_CONN_STATE_UNKNOWN &&
+            memcmp(&(btif_hh_cb.devices[i].bd_addr), bd_addr, BD_ADDR_LEN) == 0)
+        {
+            return &btif_hh_cb.devices[i];
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_find_connected_dev_by_bda
+**
+** Description      Return the connected device pointer of the specified bt_bdaddr_t.
+**
+** Returns          Device entry pointer in the device table
+*******************************************************************************/
+static btif_hh_device_t *btif_hh_find_connected_dev_by_bda(bt_bdaddr_t *bd_addr)
+{
+    UINT32 i;
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+        if (btif_hh_cb.devices[i].dev_status == BTHH_CONN_STATE_CONNECTED &&
+            memcmp(&(btif_hh_cb.devices[i].bd_addr), bd_addr, BD_ADDR_LEN) == 0)
+        {
+            return &btif_hh_cb.devices[i];
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_add_added_dev
+**
+** Description      Add a new device to the added device list.
+**
+** Returns          TRUE if add successfully, otherwise FALSE.
+*******************************************************************************/
+BOOLEAN btif_hh_add_added_dev(bt_bdaddr_t bda, tBTA_HH_ATTR_MASK attr_mask)
+{
+    int i;
+    for (i = 0; i < BTIF_HH_MAX_ADDED_DEV; i++) {
+        if (memcmp(&(btif_hh_cb.added_devices[i].bd_addr), &bda, BD_ADDR_LEN) == 0) {
+            BTIF_TRACE_WARNING6(" Device %02X:%02X:%02X:%02X:%02X:%02X already added",
+                  bda.address[0], bda.address[1], bda.address[2], bda.address[3], bda.address[4], bda.address[5]);
+            return FALSE;
+        }
+    }
+    for (i = 0; i < BTIF_HH_MAX_ADDED_DEV; i++) {
+        if (btif_hh_cb.added_devices[i].bd_addr.address[0] == 0 &&
+            btif_hh_cb.added_devices[i].bd_addr.address[1] == 0 &&
+            btif_hh_cb.added_devices[i].bd_addr.address[2] == 0 &&
+            btif_hh_cb.added_devices[i].bd_addr.address[3] == 0 &&
+            btif_hh_cb.added_devices[i].bd_addr.address[4] == 0 &&
+            btif_hh_cb.added_devices[i].bd_addr.address[5] == 0)
+        {
+            BTIF_TRACE_WARNING6(" Added device %02X:%02X:%02X:%02X:%02X:%02X",
+                  bda.address[0], bda.address[1], bda.address[2], bda.address[3], bda.address[4], bda.address[5]);
+            memcpy(&(btif_hh_cb.added_devices[i].bd_addr), &bda, BD_ADDR_LEN);
+            btif_hh_cb.added_devices[i].dev_handle = BTA_HH_INVALID_HANDLE;
+            btif_hh_cb.added_devices[i].attr_mask  = attr_mask;
+            return TRUE;
+        }
+    }
+
+    BTIF_TRACE_WARNING1("%s: Error, out of space to add device",__FUNCTION__);
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_hh_remove_device
+ **
+ ** Description      Remove an added device from the stack.
+ **
+ ** Returns          void
+ *******************************************************************************/
+void btif_hh_remove_device(bt_bdaddr_t bd_addr)
+{
+    int                    i;
+    btif_hh_device_t       *p_dev;
+    btif_hh_added_device_t *p_added_dev;
+
+    ALOGI("%s: bda = %02x:%02x:%02x:%02x:%02x:%02x", __FUNCTION__,
+         bd_addr.address[0], bd_addr.address[1], bd_addr.address[2], bd_addr.address[3], bd_addr.address[4], bd_addr.address[5]);
+
+    for (i = 0; i < BTIF_HH_MAX_ADDED_DEV; i++) {
+        p_added_dev = &btif_hh_cb.added_devices[i];
+        if (memcmp(&(p_added_dev->bd_addr),&bd_addr, 6) == 0) {
+            BTA_HhRemoveDev(p_added_dev->dev_handle);
+            btif_storage_remove_hid_info(&(p_added_dev->bd_addr));
+            memset(&(p_added_dev->bd_addr), 0, 6);
+            p_added_dev->dev_handle = BTA_HH_INVALID_HANDLE;
+            break;
+        }
+    }
+
+    p_dev = btif_hh_find_dev_by_bda(&bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_WARNING6(" Oops, can't find device [%02x:%02x:%02x:%02x:%02x:%02x]",
+             bd_addr.address[0], bd_addr.address[1], bd_addr.address[2], bd_addr.address[3], bd_addr.address[4], bd_addr.address[5]);
+        return;
+    }
+
+    p_dev->dev_status = BTHH_CONN_STATE_UNKNOWN;
+    p_dev->dev_handle = BTA_HH_INVALID_HANDLE;
+    if (btif_hh_cb.device_num > 0) {
+        btif_hh_cb.device_num--;
+    }
+    else {
+        BTIF_TRACE_WARNING1("%s: device_num = 0", __FUNCTION__);
+    }
+    if (p_dev->p_buf != NULL) {
+        GKI_freebuf(p_dev->p_buf);
+        p_dev->p_buf = NULL;
+    }
+    BTIF_TRACE_DEBUG2("%s: uhid fd = %d", __FUNCTION__, p_dev->fd);
+    if (p_dev->fd >= 0) {
+        bta_hh_co_destroy(p_dev->fd);
+        p_dev->fd = -1;
+    }
+}
+
+
+BOOLEAN btif_hh_copy_hid_info(tBTA_HH_DEV_DSCP_INFO* dest , tBTA_HH_DEV_DSCP_INFO* src)
+{
+    dest->descriptor.dl_len = 0;
+    if (src->descriptor.dl_len >0)
+    {
+        dest->descriptor.dsc_list = (UINT8 *) GKI_getbuf(src->descriptor.dl_len);
+        if (dest->descriptor.dsc_list == NULL)
+        {
+            BTIF_TRACE_WARNING1("%s: Failed to allocate DSCP for CB", __FUNCTION__);
+            return FALSE;
+        }
+    }
+    memcpy(dest->descriptor.dsc_list, src->descriptor.dsc_list, src->descriptor.dl_len);
+    dest->descriptor.dl_len = src->descriptor.dl_len;
+    dest->vendor_id  = src->vendor_id;
+    dest->product_id = src->product_id;
+    dest->version    = src->version;
+    dest->ctry_code  = src->ctry_code;
+    return TRUE;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hh_virtual_unplug
+**
+** Description      Virtual unplug initiated from the BTIF thread context
+**                  Special handling for HID mouse-
+**
+** Returns          void
+**
+*******************************************************************************/
+
+bt_status_t btif_hh_virtual_unplug(bt_bdaddr_t *bd_addr)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    btif_hh_device_t *p_dev;
+    char bd_str[18];
+    sprintf(bd_str, "%02X:%02X:%02X:%02X:%02X:%02X",
+            bd_addr->address[0],  bd_addr->address[1],  bd_addr->address[2],  bd_addr->address[3],
+            bd_addr->address[4], bd_addr->address[5]);
+    p_dev = btif_hh_find_dev_by_bda(bd_addr);
+    if ((p_dev != NULL) && (p_dev->dev_status == BTHH_CONN_STATE_CONNECTED)
+        && (p_dev->attr_mask & HID_VIRTUAL_CABLE))
+    {
+        BTIF_TRACE_DEBUG1("%s Sending BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG", __FUNCTION__);
+        BTA_HhSendCtrl(p_dev->dev_handle, BTA_HH_CTRL_VIRTUAL_CABLE_UNPLUG);
+        return BT_STATUS_SUCCESS;
+    }
+    else
+    {
+        BTIF_TRACE_ERROR2("%s: Error, device %s not opened.", __FUNCTION__, bd_str);
+        return BT_STATUS_FAIL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_connect
+**
+** Description      connection initiated from the BTIF thread context
+**
+** Returns          int status
+**
+*******************************************************************************/
+
+bt_status_t btif_hh_connect(bt_bdaddr_t *bd_addr)
+{
+    btif_hh_device_t *dev;
+    btif_hh_added_device_t *added_dev = NULL;
+    char bda_str[20];
+    int i;
+    BD_ADDR *bda = (BD_ADDR*)bd_addr;
+    tBTA_HH_CONN conn;
+    CHECK_BTHH_INIT();
+    dev = btif_hh_find_dev_by_bda(bd_addr);
+    BTIF_TRACE_DEBUG0("Connect _hh");
+    sprintf(bda_str, "%02X:%02X:%02X:%02X:%02X:%02X",
+            (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+    if (dev == NULL && btif_hh_cb.device_num >= BTIF_HH_MAX_HID) {
+        // No space for more HID device now.
+         BTIF_TRACE_WARNING2("%s: Error, exceeded the maximum supported HID device number %d",
+             __FUNCTION__, BTIF_HH_MAX_HID);
+        return BT_STATUS_FAIL;
+    }
+
+    for (i = 0; i < BTIF_HH_MAX_ADDED_DEV; i++) {
+        if (memcmp(&(btif_hh_cb.added_devices[i].bd_addr), bd_addr, BD_ADDR_LEN) == 0) {
+            added_dev = &btif_hh_cb.added_devices[i];
+             BTIF_TRACE_WARNING3("%s: Device %s already added, attr_mask = 0x%x",
+                 __FUNCTION__, bda_str, added_dev->attr_mask);
+        }
+    }
+
+    if (added_dev != NULL) {
+        if (added_dev->dev_handle == BTA_HH_INVALID_HANDLE) {
+            // No space for more HID device now.
+            BTIF_TRACE_ERROR2("%s: Error, device %s added but addition failed", __FUNCTION__, bda_str);
+            memset(&(added_dev->bd_addr), 0, 6);
+            added_dev->dev_handle = BTA_HH_INVALID_HANDLE;
+            return BT_STATUS_FAIL;
+        }
+    }
+    if (added_dev == NULL ||
+        (added_dev->attr_mask & HID_NORMALLY_CONNECTABLE) != 0 ||
+        (added_dev->attr_mask & HID_RECONN_INIT) == 0)
+    {
+        tBTA_SEC sec_mask = BTUI_HH_SECURITY;
+        btif_hh_cb.status = BTIF_HH_DEV_CONNECTING;
+        BD_ADDR *bda = (BD_ADDR*)bd_addr;
+        BTA_HhOpen(*bda, BTA_HH_PROTO_RPT_MODE, sec_mask);
+    }
+    else {
+        // This device shall be connected from the host side.
+        BTIF_TRACE_ERROR2("%s: Error, device %s can only be reconnected from device side",
+             __FUNCTION__, bda_str);
+        //TODO
+       /* if ((remote_class & BT_DEV_CLASS_MASK) == BT_DEV_CLASS_HID_POINTING) {
+            //SIG_HH_CONNECTION, *bda, HH_CONN_STATUS_FAILED_MOUSE_FROM_HOST);
+        }
+        else {
+           // SIG_HH_CONNECTION, *bda, HH_CONN_STATUS_FAILED_KBD_FROM_HOST);
+        }*/
+        return BT_STATUS_FAIL;
+
+    }
+    HAL_CBACK(bt_hh_callbacks, connection_state_cb, bd_addr, BTHH_CONN_STATE_CONNECTING);
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_disconnect
+**
+** Description      disconnection initiated from the BTIF thread context
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void btif_hh_disconnect(bt_bdaddr_t *bd_addr)
+{
+    BD_ADDR *bda = (BD_ADDR*)bd_addr;
+    btif_hh_device_t *p_dev;
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev != NULL)
+    {
+        BTA_HhClose(p_dev->dev_handle);
+    }
+    else
+        BTIF_TRACE_DEBUG1("%s-- Error: device not connected:",__FUNCTION__);
+}
+
+/*****************************************************************************
+**   Section name (Group of functions)
+*****************************************************************************/
+
+/*****************************************************************************
+**
+**   btif hh api functions (no context switch)
+**
+*****************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         btif_hh_upstreams_evt
+**
+** Description      Executes HH UPSTREAMS events in btif context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hh_upstreams_evt(UINT16 event, char* p_param)
+{
+    tBTA_HH *p_data = (tBTA_HH *)p_param;
+    bdstr_t bdstr;
+    btif_hh_device_t *p_dev = NULL;
+    int i;
+    int len, tmplen;
+
+    BTIF_TRACE_DEBUG2("%s: event=%s", __FUNCTION__, dump_hh_event(event));
+
+    switch (event)
+    {
+        case BTA_HH_ENABLE_EVT:
+            BTIF_TRACE_DEBUG2("%s: BTA_HH_ENABLE_EVT: status =%d",__FUNCTION__, p_data->status);
+            if (p_data->status == BTA_HH_OK) {
+                btif_hh_cb.status = BTIF_HH_ENABLED;
+                BTIF_TRACE_DEBUG1("%s--Loading added devices",__FUNCTION__);
+                /* Add hid descriptors for already bonded hid devices*/
+                btif_storage_load_bonded_hid_info();
+            }
+            else {
+                btif_hh_cb.status = BTIF_HH_DISABLED;
+                BTIF_TRACE_WARNING1("BTA_HH_ENABLE_EVT: Error, HH enabling failed, status = %d", p_data->status);
+            }
+            break;
+
+        case BTA_HH_DISABLE_EVT:
+            btif_hh_cb.status = BTIF_HH_DISABLED;
+            if (p_data->status == BTA_HH_OK) {
+                int i;
+                //Clear the control block
+                memset(&btif_hh_cb, 0, sizeof(btif_hh_cb));
+                for (i = 0; i < BTIF_HH_MAX_HID; i++){
+                    btif_hh_cb.devices[i].dev_status = BTHH_CONN_STATE_UNKNOWN;
+                }
+            }
+            else
+                BTIF_TRACE_WARNING1("BTA_HH_DISABLE_EVT: Error, HH disabling failed, status = %d", p_data->status);
+            break;
+
+        case BTA_HH_OPEN_EVT:
+            BTIF_TRACE_WARNING3("%s: BTA_HH_OPN_EVT: handle=%d, status =%d",__FUNCTION__, p_data->conn.handle, p_data->conn.status);
+            if (p_data->conn.status == BTA_HH_OK) {
+                p_dev = btif_hh_find_connected_dev_by_handle(p_data->conn.handle);
+                if (p_dev == NULL) {
+                    BTIF_TRACE_WARNING1("BTA_HH_OPEN_EVT: Error, cannot find device with handle %d", p_data->conn.handle);
+                    btif_hh_cb.status = BTIF_HH_DEV_DISCONNECTED;
+                    // The connect request must come from device side and exceeded the connected
+                                   // HID device number.
+                    BTA_HhClose(p_data->conn.handle);
+                    HAL_CBACK(bt_hh_callbacks, connection_state_cb, (bt_bdaddr_t*) &p_data->conn.bda,BTHH_CONN_STATE_DISCONNECTED);
+                }
+                else if (p_dev->fd < 0) {
+                    BTIF_TRACE_WARNING0("BTA_HH_OPEN_EVT: Error, failed to find the uhid driver...");
+                    memcpy(&(p_dev->bd_addr), p_data->conn.bda, BD_ADDR_LEN);
+                    //remove the connection  and then try again to reconnect from the mouse side to recover
+                    btif_hh_cb.status = BTIF_HH_DEV_DISCONNECTED;
+                    BTA_HhClose(p_data->conn.handle);
+                }
+                else {
+                    BTIF_TRACE_WARNING1("BTA_HH_OPEN_EVT: Found device...Getting dscp info for handle ... %d",p_data->conn.handle);
+                    memcpy(&(p_dev->bd_addr), p_data->conn.bda, BD_ADDR_LEN);
+                    btif_hh_cb.status = BTIF_HH_DEV_CONNECTED;
+                    BTA_HhSetIdle(p_data->conn.handle, 0);
+                    btif_hh_cb.p_curr_dev = btif_hh_find_connected_dev_by_handle(p_data->conn.handle);
+                    BTA_HhGetDscpInfo(p_data->conn.handle);
+                    p_dev->dev_status = BTHH_CONN_STATE_CONNECTED;
+                    HAL_CBACK(bt_hh_callbacks, connection_state_cb,&(p_dev->bd_addr), p_dev->dev_status);
+                }
+            }
+            else {
+                bt_bdaddr_t *bdaddr = (bt_bdaddr_t*)p_data->conn.bda;
+                HAL_CBACK(bt_hh_callbacks, connection_state_cb, (bt_bdaddr_t*) &p_data->conn.bda,BTHH_CONN_STATE_DISCONNECTED);
+                btif_hh_cb.status = BTIF_HH_DEV_DISCONNECTED;
+            }
+            break;
+        case BTA_HH_CLOSE_EVT:
+            BTIF_TRACE_DEBUG2("BTA_HH_CLOSE_EVT: status = %d, handle = %d",
+            p_data->dev_status.status, p_data->dev_status.handle);
+            p_dev = btif_hh_find_connected_dev_by_handle(p_data->dev_status.handle);
+            if (p_dev != NULL) {
+                BTIF_TRACE_DEBUG2("%s: uhid fd = %d", __FUNCTION__, p_dev->fd);
+                if (p_dev->fd >= 0){
+                    UINT8 hidreport[9];
+                    memset(hidreport,0,9);
+                    hidreport[0]=1;
+                    bta_hh_co_write(p_dev->fd , hidreport, sizeof(hidreport));
+                }
+                btif_hh_cb.status = BTIF_HH_DEV_DISCONNECTED;
+                p_dev->dev_status = BTHH_CONN_STATE_DISCONNECTED;
+                HAL_CBACK(bt_hh_callbacks, connection_state_cb,&(p_dev->bd_addr), p_dev->dev_status);
+                BTIF_TRACE_DEBUG2("%s: Closing uhid fd = %d", __FUNCTION__, p_dev->fd);
+                bta_hh_co_destroy(p_dev->fd);
+                p_dev->fd = -1;
+            }
+            else {
+                BTIF_TRACE_WARNING1("Error: cannot find device with handle %d", p_data->dev_status.handle);
+            }
+            break;
+        case BTA_HH_GET_RPT_EVT:
+            BTIF_TRACE_DEBUG2("BTA_HH_GET_RPT_EVT: status = %d, handle = %d",
+                 p_data->hs_data.status, p_data->hs_data.handle);
+            p_dev = btif_hh_find_connected_dev_by_handle(p_data->conn.handle);
+            HAL_CBACK(bt_hh_callbacks, get_report_cb,(bt_bdaddr_t*) &(p_dev->bd_addr), (bthh_status_t) p_data->hs_data.status,
+                (uint8_t*) p_data->hs_data.rsp_data.p_rpt_data, BT_HDR_SIZE);
+            break;
+
+        case BTA_HH_SET_RPT_EVT:
+            BTIF_TRACE_DEBUG2("BTA_HH_SET_RPT_EVT: status = %d, handle = %d",
+            p_data->dev_status.status, p_data->dev_status.handle);
+            p_dev = btif_hh_find_connected_dev_by_handle(p_data->dev_status.handle);
+            if (p_dev != NULL && p_dev->p_buf != NULL) {
+                BTIF_TRACE_DEBUG0("Freeing buffer..." );
+                GKI_freebuf(p_dev->p_buf);
+                p_dev->p_buf = NULL;
+            }
+            break;
+
+        case BTA_HH_GET_PROTO_EVT:
+            p_dev = btif_hh_find_connected_dev_by_handle(p_data->dev_status.handle);
+            BTIF_TRACE_WARNING4("BTA_HH_GET_PROTO_EVT: status = %d, handle = %d, proto = [%d], %s",
+                 p_data->hs_data.status, p_data->hs_data.handle,
+                 p_data->hs_data.rsp_data.proto_mode,
+                 (p_data->hs_data.rsp_data.proto_mode == BTA_HH_PROTO_RPT_MODE) ? "Report Mode" :
+                 (p_data->hs_data.rsp_data.proto_mode == BTA_HH_PROTO_BOOT_MODE) ? "Boot Mode" : "Unsupported");
+            HAL_CBACK(bt_hh_callbacks, protocol_mode_cb,(bt_bdaddr_t*) &(p_dev->bd_addr), (bthh_status_t)p_data->hs_data.status,
+                             (bthh_protocol_mode_t) p_data->hs_data.rsp_data.proto_mode);
+            break;
+
+        case BTA_HH_SET_PROTO_EVT:
+            BTIF_TRACE_DEBUG2("BTA_HH_SET_PROTO_EVT: status = %d, handle = %d",
+                 p_data->dev_status.status, p_data->dev_status.handle);
+            break;
+
+        case BTA_HH_GET_IDLE_EVT:
+            BTIF_TRACE_DEBUG3("BTA_HH_GET_IDLE_EVT: handle = %d, status = %d, rate = %d",
+                 p_data->hs_data.handle, p_data->hs_data.status,
+                 p_data->hs_data.rsp_data.idle_rate);
+            break;
+
+        case BTA_HH_SET_IDLE_EVT:
+            BTIF_TRACE_DEBUG2("BTA_HH_SET_IDLE_EVT: status = %d, handle = %d",
+            p_data->dev_status.status, p_data->dev_status.handle);
+            break;
+
+        case BTA_HH_GET_DSCP_EVT:
+            BTIF_TRACE_WARNING2("BTA_HH_GET_DSCP_EVT: status = %d, handle = %d",
+                p_data->dev_status.status, p_data->dev_status.handle);
+                len = p_data->dscp_info.descriptor.dl_len;
+                BTIF_TRACE_DEBUG1("BTA_HH_GET_DSCP_EVT: len = %d", len);
+            p_dev = btif_hh_cb.p_curr_dev;
+            if (p_dev == NULL) {
+                BTIF_TRACE_ERROR0("BTA_HH_GET_DSCP_EVT: No HID device is currently connected");
+                return;
+            }
+            if (p_dev->fd < 0) {
+                ALOGE("BTA_HH_GET_DSCP_EVT: Error, failed to find the uhid driver...");
+                return;
+            }
+            {
+                char *cached_name = NULL;
+                char name[] = "Broadcom Bluetooth HID";
+                if (cached_name == NULL) {
+                    cached_name = name;
+                }
+
+                BTIF_TRACE_WARNING2("%s: name = %s", __FUNCTION__, cached_name);
+                bta_hh_co_send_hid_info(p_dev, cached_name,
+                    p_data->dscp_info.vendor_id, p_data->dscp_info.product_id,
+                    p_data->dscp_info.version,   p_data->dscp_info.ctry_code,
+                    len, p_data->dscp_info.descriptor.dsc_list);
+                if (btif_hh_add_added_dev(p_dev->bd_addr, p_dev->attr_mask)) {
+                    BD_ADDR bda;
+                    bdcpy(bda, p_dev->bd_addr.address);
+                    tBTA_HH_DEV_DSCP_INFO dscp_info;
+                    bt_status_t ret;
+                    bdcpy(bda, p_dev->bd_addr.address);
+                    btif_hh_copy_hid_info(&dscp_info, &p_data->dscp_info);
+                    BTIF_TRACE_DEBUG6("BTA_HH_GET_DSCP_EVT:bda = %02x:%02x:%02x:%02x:%02x:%02x",
+                              p_dev->bd_addr.address[0], p_dev->bd_addr.address[1], p_dev->bd_addr.address[2],
+                              p_dev->bd_addr.address[3], p_dev->bd_addr.address[4], p_dev->bd_addr.address[5]);
+                    BTA_HhAddDev(bda, p_dev->attr_mask,p_dev->sub_class,p_dev->app_id, dscp_info);
+                    // write hid info to nvram
+                    ret = btif_storage_add_hid_device_info(&(p_dev->bd_addr), p_dev->attr_mask,p_dev->sub_class,p_dev->app_id,
+                                                        p_data->dscp_info.vendor_id, p_data->dscp_info.product_id,
+                                                        p_data->dscp_info.version,   p_data->dscp_info.ctry_code,
+                                                        len, p_data->dscp_info.descriptor.dsc_list);
+
+                    ASSERTC(ret == BT_STATUS_SUCCESS, "storing hid info failed", ret);
+                    BTIF_TRACE_WARNING0("BTA_HH_GET_DSCP_EVT: Called add device");
+
+                    //Free buffer created for dscp_info;
+                    if (dscp_info.descriptor.dl_len >0 && dscp_info.descriptor.dsc_list != NULL)
+                    {
+                      GKI_freebuf(dscp_info.descriptor.dsc_list);
+                      dscp_info.descriptor.dsc_list = NULL;
+                      dscp_info.descriptor.dl_len=0;
+                    }
+                }
+                else {
+                    //Device already added.
+                    BTIF_TRACE_WARNING1("%s: Device already added ",__FUNCTION__);
+                }
+                /*Sync HID Keyboard lockstates */
+                tmplen = sizeof(hid_kb_numlock_on_list)
+                            / sizeof(tHID_KB_LIST);
+                for(i = 0; i< tmplen; i++)
+                {
+                    if(p_data->dscp_info.vendor_id
+                        == hid_kb_numlock_on_list[i].version_id &&
+                        p_data->dscp_info.product_id
+                        == hid_kb_numlock_on_list[i].product_id)
+                    {
+                        BTIF_TRACE_DEBUG3("%s() idx[%d] Enabling "\
+                            "NUMLOCK for device :: %s", __FUNCTION__,
+                            i, hid_kb_numlock_on_list[i].kb_name);
+                        /* Enable NUMLOCK by default so that numeric
+                            keys work from first keyboard connect */
+                        set_keylockstate(BTIF_HH_KEYSTATE_MASK_NUMLOCK,
+                                        TRUE);
+                        sync_lockstate_on_connect(p_dev);
+                        /* End Sync HID Keyboard lockstates */
+                        break;
+                    }
+                }
+            }
+            break;
+
+        case BTA_HH_ADD_DEV_EVT:
+            BTIF_TRACE_WARNING2("BTA_HH_ADD_DEV_EVT: status = %d, handle = %d",p_data->dev_info.status, p_data->dev_info.handle);
+            int i;
+            for (i = 0; i < BTIF_HH_MAX_ADDED_DEV; i++) {
+                if (memcmp(btif_hh_cb.added_devices[i].bd_addr.address, p_data->dev_info.bda, 6) == 0) {
+                    if (p_data->dev_info.status == BTA_HH_OK) {
+                        btif_hh_cb.added_devices[i].dev_handle = p_data->dev_info.handle;
+                    }
+                    else {
+                        memset(btif_hh_cb.added_devices[i].bd_addr.address, 0, 6);
+                        btif_hh_cb.added_devices[i].dev_handle = BTA_HH_INVALID_HANDLE;
+                    }
+                    break;
+                }
+            }
+            break;
+        case BTA_HH_RMV_DEV_EVT:
+                BTIF_TRACE_DEBUG2("BTA_HH_RMV_DEV_EVT: status = %d, handle = %d",
+                     p_data->dev_info.status, p_data->dev_info.handle);
+                BTIF_TRACE_DEBUG6("BTA_HH_RMV_DEV_EVT:bda = %02x:%02x:%02x:%02x:%02x:%02x",
+                     p_data->dev_info.bda[0], p_data->dev_info.bda[1], p_data->dev_info.bda[2],
+                     p_data->dev_info.bda[3], p_data->dev_info.bda[4], p_data->dev_info.bda[5]);
+                break;
+
+
+        case BTA_HH_VC_UNPLUG_EVT:
+                BTIF_TRACE_DEBUG2("BTA_HH_VC_UNPLUG_EVT: status = %d, handle = %d",
+                     p_data->dev_status.status, p_data->dev_status.handle);
+                p_dev = btif_hh_find_connected_dev_by_handle(p_data->dev_status.handle);
+                btif_hh_cb.status = BTIF_HH_DEV_DISCONNECTED;
+                if (p_dev != NULL) {
+                    BTIF_TRACE_DEBUG6("BTA_HH_VC_UNPLUG_EVT:bda = %02x:%02x:%02x:%02x:%02x:%02x",
+                         p_dev->bd_addr.address[0], p_dev->bd_addr.address[1], p_dev->bd_addr.address[2],
+                         p_dev->bd_addr.address[3], p_dev->bd_addr.address[4], p_dev->bd_addr.address[5]);
+                    p_dev->dev_status = BTHH_CONN_STATE_DISCONNECTED;
+                    BTIF_TRACE_DEBUG1("%s---Sending connection state change", __FUNCTION__);
+                    HAL_CBACK(bt_hh_callbacks, connection_state_cb,&(p_dev->bd_addr), p_dev->dev_status);
+                    BTIF_TRACE_DEBUG1("%s---Removing HID mouse bond", __FUNCTION__);
+                    BTA_DmRemoveDevice((UINT8 *)p_dev->bd_addr.address);
+                    HAL_CBACK(bt_hh_callbacks, virtual_unplug_cb,&(p_dev->bd_addr),p_data->dev_status.status);
+                }
+                break;
+
+        case BTA_HH_API_ERR_EVT  :
+                ALOGI("BTA_HH API_ERR");
+                break;
+
+
+
+            default:
+                BTIF_TRACE_WARNING2("%s: Unhandled event: %d", __FUNCTION__, event);
+                break;
+        }
+}
+
+/*******************************************************************************
+**
+** Function         bte_hh_evt
+**
+** Description      Switches context from BTE to BTIF for all HH events
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void bte_hh_evt(tBTA_HH_EVT event, tBTA_HH *p_data)
+{
+    bt_status_t status;
+    int param_len = 0;
+
+    if (BTA_HH_ENABLE_EVT == event)
+        param_len = sizeof(tBTA_HH_STATUS);
+    else if (BTA_HH_OPEN_EVT == event)
+        param_len = sizeof(tBTA_HH_CONN);
+    else if (BTA_HH_DISABLE_EVT == event)
+        param_len = sizeof(tBTA_HH_STATUS);
+    else if (BTA_HH_CLOSE_EVT == event)
+        param_len = sizeof(tBTA_HH_CBDATA);
+    else if (BTA_HH_GET_DSCP_EVT == event)
+        param_len = sizeof(tBTA_HH_DEV_DSCP_INFO);
+    else if ((BTA_HH_GET_PROTO_EVT == event) || (BTA_HH_GET_RPT_EVT == event)|| (BTA_HH_GET_IDLE_EVT == event))
+        param_len = sizeof(tBTA_HH_HSDATA);
+    else if ((BTA_HH_SET_PROTO_EVT == event) || (BTA_HH_SET_RPT_EVT == event) || (BTA_HH_VC_UNPLUG_EVT == event) || (BTA_HH_SET_IDLE_EVT == event))
+        param_len = sizeof(tBTA_HH_CBDATA);
+    else if ((BTA_HH_ADD_DEV_EVT == event) || (BTA_HH_RMV_DEV_EVT == event) )
+        param_len = sizeof(tBTA_HH_DEV_INFO);
+    else if (BTA_HH_API_ERR_EVT == event)
+        param_len = 0;
+    /* switch context to btif task context (copy full union size for convenience) */
+    status = btif_transfer_context(btif_hh_upstreams_evt, (uint16_t)event, (void*)p_data, param_len, NULL);
+
+    /* catch any failed context transfers */
+    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_handle_evt
+**
+** Description      Switches context for immediate callback
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void btif_hh_handle_evt(UINT16 event, char *p_param)
+{
+    bt_bdaddr_t *bd_addr = (bt_bdaddr_t*)p_param;
+    BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+    int ret;
+    switch(event)
+    {
+        case BTIF_HH_CONNECT_REQ_EVT:
+        {
+            ret = btif_hh_connect(bd_addr);
+            if(ret == BT_STATUS_SUCCESS)
+            {
+                HAL_CBACK(bt_hh_callbacks, connection_state_cb,bd_addr,BTHH_CONN_STATE_CONNECTING);
+            }
+            else
+                HAL_CBACK(bt_hh_callbacks, connection_state_cb,bd_addr,BTHH_CONN_STATE_DISCONNECTED);
+        }
+        break;
+
+        case BTIF_HH_DISCONNECT_REQ_EVT:
+        {
+            BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+            btif_hh_disconnect(bd_addr);
+            HAL_CBACK(bt_hh_callbacks, connection_state_cb,bd_addr,BTHH_CONN_STATE_DISCONNECTING);
+        }
+        break;
+
+        case BTIF_HH_VUP_REQ_EVT:
+        {
+            BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+            ret = btif_hh_virtual_unplug(bd_addr);
+        }
+        break;
+
+        default:
+        {
+            BTIF_TRACE_WARNING2("%s : Unknown event 0x%x", __FUNCTION__, event);
+        }
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hh_init
+**
+** Description     initializes the hh interface
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t init( bthh_callbacks_t* callbacks )
+{
+    UINT32 i;
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+
+    bt_hh_callbacks = callbacks;
+    memset(&btif_hh_cb, 0, sizeof(btif_hh_cb));
+    for (i = 0; i < BTIF_HH_MAX_HID; i++){
+        btif_hh_cb.devices[i].dev_status = BTHH_CONN_STATE_UNKNOWN;
+    }
+    /* Invoke the enable service API to the core to set the appropriate service_id */
+    btif_enable_service(BTA_HID_SERVICE_ID);
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function        connect
+**
+** Description     connect to hid device
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t connect( bt_bdaddr_t *bd_addr)
+{
+    if(btif_hh_cb.status != BTIF_HH_DEV_CONNECTING)
+    {
+        btif_transfer_context(btif_hh_handle_evt, BTIF_HH_CONNECT_REQ_EVT,
+                                 (char*)bd_addr, sizeof(bt_bdaddr_t), NULL);
+        return BT_STATUS_SUCCESS;
+    }
+    else
+        return BT_STATUS_BUSY;
+}
+
+/*******************************************************************************
+**
+** Function         disconnect
+**
+** Description      disconnect from hid device
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t disconnect( bt_bdaddr_t *bd_addr )
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED)
+    {
+        BTIF_TRACE_WARNING2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev != NULL)
+    {
+        return btif_transfer_context(btif_hh_handle_evt, BTIF_HH_DISCONNECT_REQ_EVT,
+                     (char*)bd_addr, sizeof(bt_bdaddr_t), NULL);
+    }
+    else
+    {
+        BTIF_TRACE_WARNING1("%s: Error, device  not opened.", __FUNCTION__);
+        return BT_STATUS_FAIL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         virtual_unplug
+**
+** Description      Virtual UnPlug (VUP) the specified HID device.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t virtual_unplug (bt_bdaddr_t *bd_addr)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    char bd_str[18];
+    sprintf(bd_str, "%02X:%02X:%02X:%02X:%02X:%02X",
+            bd_addr->address[0],  bd_addr->address[1],  bd_addr->address[2],  bd_addr->address[3],
+            bd_addr->address[4], bd_addr->address[5]);
+    if (btif_hh_cb.status == BTIF_HH_DISABLED)
+    {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+    p_dev = btif_hh_find_dev_by_bda(bd_addr);
+    if (!p_dev)
+    {
+        BTIF_TRACE_ERROR2("%s: Error, device %s not opened.", __FUNCTION__, bd_str);
+        return BT_STATUS_FAIL;
+    }
+    btif_transfer_context(btif_hh_handle_evt, BTIF_HH_VUP_REQ_EVT,
+                                 (char*)bd_addr, sizeof(bt_bdaddr_t), NULL);
+    return BT_STATUS_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         set_info
+**
+** Description      Set the HID device descriptor for the specified HID device.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t set_info (bt_bdaddr_t *bd_addr, bthh_hid_info_t hid_info )
+{
+    CHECK_BTHH_INIT();
+    tBTA_HH_DEV_DSCP_INFO dscp_info;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+    BTIF_TRACE_DEBUG6("%s: sub_class = 0x%02x, app_id = %d, vendor_id = 0x%04x, "
+         "product_id = 0x%04x, version= 0x%04x",
+         __FUNCTION__, hid_info.sub_class,
+         hid_info.app_id, hid_info.vendor_id, hid_info.product_id,
+         hid_info.version);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED)
+    {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    dscp_info.vendor_id  = hid_info.vendor_id;
+    dscp_info.product_id = hid_info.product_id;
+    dscp_info.version    = hid_info.version;
+    dscp_info.ctry_code  = hid_info.ctry_code;
+
+    dscp_info.descriptor.dl_len = hid_info.dl_len;
+    dscp_info.descriptor.dsc_list = (UINT8 *) GKI_getbuf(dscp_info.descriptor.dl_len);
+    if (dscp_info.descriptor.dsc_list == NULL)
+    {
+        ALOGE("%s: Failed to allocate DSCP for CB", __FUNCTION__);
+        return BT_STATUS_FAIL;
+    }
+    memcpy(dscp_info.descriptor.dsc_list, &(hid_info.dsc_list), hid_info.dl_len);
+
+    if (btif_hh_add_added_dev(*bd_addr, hid_info.attr_mask))
+    {
+        BTA_HhAddDev(*bda, hid_info.attr_mask, hid_info.sub_class,
+                     hid_info.app_id, dscp_info);
+    }
+
+    GKI_freebuf(dscp_info.descriptor.dsc_list);
+
+    return BT_STATUS_SUCCESS;
+}
+/*******************************************************************************
+**
+** Function         get_idle_time
+**
+** Description      Get the HID idle time
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t get_idle_time(bt_bdaddr_t *bd_addr)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG6(" addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev != NULL) {
+        //BTA_HhGetIdle(p_dev->dev_handle);
+    }
+    else {
+        return BT_STATUS_FAIL;
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         set_idle_time
+**
+** Description      Set the HID idle time
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t set_idle_time (bt_bdaddr_t *bd_addr, uint8_t idle_time)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_WARNING6(" Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else {
+        //BTA_HhSetIdle(p_dev->dev_handle, idle_time);
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         get_protocol
+**
+** Description      Get the HID proto mode.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t get_protocol (bt_bdaddr_t *bd_addr, bthh_protocol_mode_t protocolMode)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG6(" addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev != NULL) {
+        BTA_HhGetProtoMode(p_dev->dev_handle);
+    }
+    else {
+        return BT_STATUS_FAIL;
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         set_protocol
+**
+** Description      Set the HID proto mode.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t set_protocol (bt_bdaddr_t *bd_addr, bthh_protocol_mode_t protocolMode)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    UINT8 proto_mode = protocolMode;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG2("%s:proto_mode = %d", __FUNCTION__,protocolMode);
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_WARNING6(" Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else if (protocolMode != BTA_HH_PROTO_RPT_MODE && protocolMode != BTA_HH_PROTO_BOOT_MODE) {
+        BTIF_TRACE_WARNING2("s: Error, device proto_mode = %d.", __FUNCTION__, proto_mode);
+        return BT_STATUS_FAIL;
+    }
+    else {
+        BTA_HhSetProtoMode(p_dev->dev_handle, protocolMode);
+    }
+
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         get_report
+**
+** Description      Send a GET_REPORT to HID device.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t get_report (bt_bdaddr_t *bd_addr, bthh_report_type_t reportType, uint8_t reportId, int bufferSize)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG4("%s:proto_mode = %dr_type = %d, rpt_id = %d, buf_size = %d", __FUNCTION__,
+          reportType, reportId, bufferSize);
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_ERROR6("%s: Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else if ( ((int) reportType) <= BTA_HH_RPTT_RESRV || ((int) reportType) > BTA_HH_RPTT_FEATURE) {
+        BTIF_TRACE_ERROR6(" Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else {
+        BTA_HhGetReport(p_dev->dev_handle, reportType,
+                        reportId, bufferSize);
+    }
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         set_report
+**
+** Description      Send a SET_REPORT to HID device.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t set_report (bt_bdaddr_t *bd_addr, bthh_report_type_t reportType, char* report)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG2("%s:reportType = %d", __FUNCTION__,reportType);
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_ERROR6("%s: Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else if ( ( (int) reportType) <= BTA_HH_RPTT_RESRV || ( (int) reportType) > BTA_HH_RPTT_FEATURE) {
+        BTIF_TRACE_ERROR6(" Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+    else {
+        int    hex_bytes_filled;
+        UINT8  hexbuf[200];
+        UINT16 len = (strlen(report) + 1) / 2;
+
+        if (p_dev->p_buf != NULL) {
+            GKI_freebuf(p_dev->p_buf);
+        }
+        p_dev->p_buf = GKI_getbuf((UINT16) (len + BTA_HH_MIN_OFFSET + sizeof(BT_HDR)));
+        if (p_dev->p_buf == NULL) {
+            BTIF_TRACE_ERROR2("%s: Error, failed to allocate RPT buffer, len = %d", __FUNCTION__, len);
+            return BT_STATUS_FAIL;
+        }
+
+        p_dev->p_buf->len = len;
+        p_dev->p_buf->offset = BTA_HH_MIN_OFFSET;
+
+        /* Build a SetReport data buffer */
+        memset(hexbuf, 0, 200);
+        //TODO
+        hex_bytes_filled = ascii_2_hex(report, len, hexbuf);
+        ALOGI("Hex bytes filled, hex value: %d", hex_bytes_filled);
+
+        if (hex_bytes_filled) {
+            UINT8* pbuf_data;
+            pbuf_data = (UINT8*) (p_dev->p_buf + 1) + p_dev->p_buf->offset;
+            memcpy(pbuf_data, hexbuf, hex_bytes_filled);
+            BTA_HhSetReport(p_dev->dev_handle, reportType, p_dev->p_buf);
+        }
+        return BT_STATUS_SUCCESS;
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         send_data
+**
+** Description      Send a SEND_DATA to HID device.
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t send_data (bt_bdaddr_t *bd_addr, char* data)
+{
+    CHECK_BTHH_INIT();
+    btif_hh_device_t *p_dev;
+    BD_ADDR* bda = (BD_ADDR*) bd_addr;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    BTIF_TRACE_DEBUG6("addr = %02X:%02X:%02X:%02X:%02X:%02X",
+         (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_ERROR2("%s: Error, HH status = %d", __FUNCTION__, btif_hh_cb.status);
+        return BT_STATUS_FAIL;
+    }
+
+    p_dev = btif_hh_find_connected_dev_by_bda(bd_addr);
+    if (p_dev == NULL) {
+        BTIF_TRACE_ERROR6("%s: Error, device %02X:%02X:%02X:%02X:%02X:%02X not opened.",
+             (*bda)[0], (*bda)[1], (*bda)[2], (*bda)[3], (*bda)[4], (*bda)[5]);
+        return BT_STATUS_FAIL;
+    }
+
+    else {
+        int    hex_bytes_filled;
+        UINT8  hexbuf[200];
+        UINT16 len = (strlen(data) + 1) / 2;
+
+        if (p_dev->p_buf != NULL) {
+            GKI_freebuf(p_dev->p_buf);
+        }
+        p_dev->p_buf = GKI_getbuf((UINT16) (len + BTA_HH_MIN_OFFSET + sizeof(BT_HDR)));
+        if (p_dev->p_buf == NULL) {
+            BTIF_TRACE_ERROR2("%s: Error, failed to allocate RPT buffer, len = %d", __FUNCTION__, len);
+            return BT_STATUS_FAIL;
+        }
+
+        p_dev->p_buf->len = len;
+        p_dev->p_buf->offset = BTA_HH_MIN_OFFSET;
+
+        /* Build a SetReport data buffer */
+        memset(hexbuf, 0, 200);
+        hex_bytes_filled = ascii_2_hex(data, len, hexbuf);
+        BTIF_TRACE_ERROR2("Hex bytes filled, hex value: %d, %d", hex_bytes_filled, len);
+
+        if (hex_bytes_filled) {
+            UINT8* pbuf_data;
+            pbuf_data = (UINT8*) (p_dev->p_buf + 1) + p_dev->p_buf->offset;
+            memcpy(pbuf_data, hexbuf, hex_bytes_filled);
+            BTA_HhSendData(p_dev->dev_handle, *bda, p_dev->p_buf);
+            return BT_STATUS_SUCCESS;
+        }
+
+    }
+    return BT_STATUS_FAIL;
+}
+
+
+/*******************************************************************************
+**
+** Function         cleanup
+**
+** Description      Closes the HH interface
+**
+** Returns          bt_status_t
+**
+*******************************************************************************/
+static void  cleanup( void )
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    btif_hh_device_t *p_dev;
+    int i;
+    if (btif_hh_cb.status == BTIF_HH_DISABLED) {
+        BTIF_TRACE_WARNING2("%s: HH disabling or disabled already, status = %d", __FUNCTION__, btif_hh_cb.status);
+        return;
+    }
+    btif_hh_cb.status = BTIF_HH_DISABLING;
+    for (i = 0; i < BTIF_HH_MAX_HID; i++) {
+         p_dev = &btif_hh_cb.devices[i];
+         if (p_dev->dev_status != BTHH_CONN_STATE_UNKNOWN && p_dev->fd >= 0) {
+             BTIF_TRACE_DEBUG2("%s: Closing uhid fd = %d", __FUNCTION__, p_dev->fd);
+             bta_hh_co_destroy(p_dev->fd);
+             p_dev->fd = -1;
+         }
+     }
+
+    if (bt_hh_callbacks)
+    {
+        btif_disable_service(BTA_HID_SERVICE_ID);
+        bt_hh_callbacks = NULL;
+    }
+
+}
+
+static const bthh_interface_t bthhInterface = {
+    sizeof(bt_interface_t),
+    init,
+    connect,
+    disconnect,
+    virtual_unplug,
+    set_info,
+    get_protocol,
+    set_protocol,
+//    get_idle_time,
+//    set_idle_time,
+    get_report,
+    set_report,
+    send_data,
+    cleanup,
+};
+
+/*******************************************************************************
+**
+** Function         btif_hh_execute_service
+**
+** Description      Initializes/Shuts down the service
+**
+** Returns          BT_STATUS_SUCCESS on success, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_hh_execute_service(BOOLEAN b_enable)
+{
+     if (b_enable)
+     {
+          /* Enable and register with BTA-HH */
+          BTA_HhEnable(BTA_SEC_NONE, FALSE, bte_hh_evt);
+     }
+     else {
+         /* Disable HH */
+         BTA_HhDisable();
+     }
+     return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hh_get_interface
+**
+** Description      Get the hh callback interface
+**
+** Returns          bthh_interface_t
+**
+*******************************************************************************/
+const bthh_interface_t *btif_hh_get_interface()
+{
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    return &bthhInterface;
+}
diff --git a/btif/src/btif_hl.c b/btif/src/btif_hl.c
new file mode 100644
index 0000000..e6c3fb7
--- /dev/null
+++ b/btif/src/btif_hl.c
@@ -0,0 +1,5224 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hl.c
+ *
+ *  Description:   Health Device Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+#define LOG_TAG "BTIF_HL"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <time.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <signal.h>
+#include <ctype.h>
+#include <sys/select.h>
+#include <sys/poll.h>
+#include <cutils/sockets.h>
+#include <cutils/log.h>
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hl.h>
+
+#include "btif_common.h"
+#include "btif_util.h"
+#include "gki.h"
+#include "bd.h"
+#include "bta_api.h"
+#include "bta_hl_api.h"
+#include "mca_api.h"
+#include "btif_hl.h"
+#include "btif_storage.h"
+#include "btu.h"
+
+extern int btif_hl_update_maxfd( int max_org_s);
+extern void btif_hl_select_monitor_callback( fd_set *p_cur_set, fd_set *p_org_set );
+extern void btif_hl_select_wakeup_callback( fd_set *p_org_set , int wakeup_signal );
+extern int btif_hl_update_maxfd( int max_org_s);
+extern void btif_hl_select_monitor_callback( fd_set *p_cur_set, fd_set *p_org_set );
+extern void btif_hl_select_wakeup_callback( fd_set *p_org_set , int wakeup_signal );
+extern void btif_hl_soc_thread_init(void);
+extern void btif_hl_release_mcl_sockets(UINT8 app_idx, UINT8 mcl_idx);
+extern BOOLEAN btif_hl_create_socket(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx);
+extern void btif_hl_release_socket(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx);
+
+btif_hl_cb_t btif_hl_cb;
+btif_hl_cb_t *p_btif_hl_cb = &btif_hl_cb;
+btif_hl_nv_cb_t *p_ncb = &btif_hl_cb.ncb;
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+static bthl_callbacks_t  bt_hl_callbacks_cb;
+static bthl_callbacks_t *bt_hl_callbacks=NULL;
+
+/* signal socketpair to wake up select loop */
+
+const int btif_hl_signal_select_wakeup = 1;
+const int btif_hl_signal_select_exit = 2;
+const int btif_hl_signal_select_close_connected = 3;
+
+static int listen_s = -1;
+static int connected_s = -1;
+static int select_thread_id = -1;
+static int signal_fds[2];
+static BUFFER_Q soc_queue;
+
+static inline int btif_hl_select_wakeup(void);
+static inline int btif_hl_select_exit(void);
+static inline int btif_hl_select_close_connected(void);
+static inline int btif_hl_close_select_thread(void);
+static UINT8 btif_hl_get_next_app_id(void);
+static int btif_hl_get_next_channel_id(UINT8 app_id);
+static void btif_hl_init_next_app_id(void);
+static void btif_hl_init_next_channel_id(void);
+static void btif_hl_ctrl_cback(tBTA_HL_CTRL_EVT event, tBTA_HL_CTRL *p_data);
+static void btif_hl_set_state(btif_hl_state_t state);
+static btif_hl_state_t btif_hl_get_state(void);
+static void btif_hl_cback(tBTA_HL_EVT event, tBTA_HL *p_data);
+static void btif_hl_proc_cb_evt(UINT16 event, char* p_param);
+
+#define CHECK_CALL_CBACK(P_CB, P_CBACK, ...)\
+    if (P_CB && P_CB->P_CBACK) {            \
+        P_CB->P_CBACK(__VA_ARGS__);         \
+    }                                       \
+    else {                                  \
+        ASSERTC(0, "Callback is NULL", 0);  \
+    }
+
+
+#define BTIF_HL_CALL_CBACK(P_CB, P_CBACK, ...)\
+     if((p_btif_hl_cb->state != BTIF_HL_STATE_DISABLING) &&\
+         (p_btif_hl_cb->state != BTIF_HL_STATE_DISABLED))  \
+     {                                                     \
+        if (P_CB && P_CB->P_CBACK) {                       \
+            P_CB->P_CBACK(__VA_ARGS__);                    \
+        }                                                  \
+        else {                                             \
+            ASSERTC(0, "Callback is NULL", 0);             \
+        }                                                  \
+    }
+
+
+#define CHECK_BTHL_INIT() if (bt_hl_callbacks == NULL)\
+    {\
+        BTIF_TRACE_WARNING1("BTHL: %s: BTHL not initialized", __FUNCTION__);\
+        return BT_STATUS_NOT_READY;\
+    }\
+    else\
+    {\
+        BTIF_TRACE_EVENT1("BTHL: %s", __FUNCTION__);\
+    }
+
+
+static const btif_hl_data_type_cfg_t data_type_table[] = {
+    /* Data Specilization                   Ntx     Nrx (from Bluetooth SIG's HDP whitepaper)*/
+    {BTIF_HL_DATA_TYPE_PULSE_OXIMETER,      9216,   256},
+    {BTIF_HL_DATA_TYPE_BLOOD_PRESSURE_MON,  896,    224},
+    {BTIF_HL_DATA_TYPE_BODY_THERMOMETER,    896,    224},
+    {BTIF_HL_DATA_TYPE_BODY_WEIGHT_SCALE,   896,    224},
+    {BTIF_HL_DATA_TYPE_GLUCOSE_METER,       896,    224},
+    {BTIF_HL_DATA_TYPE_STEP_COUNTER,        6624,   224}
+};
+
+#define BTIF_HL_DATA_TABLE_SIZE  (sizeof(data_type_table) / sizeof(btif_hl_data_type_cfg_t))
+#define BTIF_HL_DEFAULT_SRC_TX_APDU_SIZE   10240 /* use this size if the data type is not
+                                                    defined in the table; for future proof */
+#define BTIF_HL_DEFAULT_SRC_RX_APDU_SIZE   512  /* use this size if the data type is not
+                                                   defined in the table; for future proof */
+
+#define BTIF_HL_ECHO_MAX_TX_RX_APDU_SIZE 1024
+
+/************************************************************************************
+**  Static utility functions
+************************************************************************************/
+
+#define BTIF_IF_GET_NAME 16
+void btif_hl_display_calling_process_name(void)
+{
+    char name[16];
+    prctl(BTIF_IF_GET_NAME, name, 0, 0, 0);
+    BTIF_TRACE_DEBUG1("Process name (%s)", name);
+}
+#define BTIF_TIMEOUT_CCH_NO_DCH_SECS   10
+/*******************************************************************************
+**
+** Function      btif_hl_if_channel_setup_pending
+**
+** Description   check whether channel id is in setup pending state or not
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_if_channel_setup_pending(int channel_id, UINT8 *p_app_idx, UINT8 *p_mcl_idx)
+{
+    btif_hl_app_cb_t    *p_acb;
+    btif_hl_mcl_cb_t    *p_mcb;
+    UINT8 i, j;
+    BOOLEAN found=FALSE;
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb  =BTIF_HL_GET_APP_CB_PTR(i);
+        if (p_acb->in_use)
+        {
+            for (j=0; j< BTA_HL_NUM_MCLS; j++)
+            {
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(i, j);
+                if (p_mcb->in_use &&
+                    p_mcb->is_connected && p_mcb->pcb.channel_id == channel_id )
+                {
+                    found = TRUE;
+                    *p_app_idx = i;
+                    *p_mcl_idx = j;
+                    break;
+                }
+            }
+        }
+        if (found)
+            break;
+    }
+    BTIF_TRACE_DEBUG5("%s found=%d channel_id=0x%08x",
+                      __FUNCTION__, found, channel_id, *p_app_idx, *p_mcl_idx);
+    return found;
+
+}
+/*******************************************************************************
+**
+** Function      btif_hl_num_dchs_in_use
+**
+** Description find number of DCHs in use
+**
+** Returns      UINT8
+*******************************************************************************/
+UINT8 btif_hl_num_dchs_in_use(UINT8 app_idx,UINT8  mcl_idx){
+
+    btif_hl_mcl_cb_t    *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    UINT8               i;
+    UINT8               cnt=0;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (p_mcb->mdl[i].in_use)
+            cnt++;
+    }
+    BTIF_TRACE_DEBUG2("%s dch in use count=%d", __FUNCTION__, cnt);
+    return cnt;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_tmr_hdlr
+**
+** Description   Process timer timeout
+**
+** Returns      void
+*******************************************************************************/
+void btif_hl_tmr_hdlr(TIMER_LIST_ENT *tle)
+{
+    btif_hl_mcl_cb_t    *p_mcb;
+    UINT8               i,j;
+    BTIF_TRACE_DEBUG2("%s timer_in_use=%d",  __FUNCTION__, tle->in_use );
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        for (j=0; j< BTA_HL_NUM_MCLS; j++)
+        {
+            p_mcb =BTIF_HL_GET_MCL_CB_PTR(i,j);
+
+            if (p_mcb->cch_timer_active)
+            {
+                BTIF_TRACE_DEBUG3("%app_idx=%d, mcl_idx=%d mcl-connected=%d",
+                                  i, j,  p_mcb->is_connected);
+                p_mcb->cch_timer_active = FALSE;
+                if (p_mcb->is_connected)
+                {
+                    BTIF_TRACE_DEBUG3("Idle timeout Close CCH app_idx=%d mcl_idx=%d mcl_handle=%d",
+                                      i ,j, p_mcb->mcl_handle);
+                    BTA_HlCchClose(p_mcb->mcl_handle);
+                }
+                else
+                {
+                    BTIF_TRACE_DEBUG2("CCH idle timeout But CCH not connected app_idx=%d mcl_idx=%d ",i,j);
+                }
+            }
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function      btif_hl_stop_cch_timer
+**
+** Description  stop CCH timer
+**
+** Returns      void
+*******************************************************************************/
+void btif_hl_stop_cch_timer(UINT8 app_idx, UINT8 mcl_idx)
+{
+    btif_hl_mcl_cb_t    *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BTIF_TRACE_DEBUG4("%s app_idx=%d, mcl_idx=%d timer_in_use=%d",
+                      __FUNCTION__,app_idx, mcl_idx, p_mcb->cch_timer.in_use);
+
+    p_mcb->cch_timer_active = FALSE;
+    if (p_mcb->cch_timer.in_use)
+    {
+        BTIF_TRACE_DEBUG0("stop CCH timer ");
+        btu_stop_timer(&p_mcb->cch_timer);
+    }
+}
+/*******************************************************************************
+**
+** Function      btif_hl_start_cch_timer
+**
+** Description  start CCH timer
+**
+** Returns      void
+*******************************************************************************/
+void btif_hl_start_cch_timer(UINT8 app_idx, UINT8 mcl_idx)
+{
+    btif_hl_mcl_cb_t    *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BTIF_TRACE_DEBUG5("%s app_idx=%d, mcl_idx=%d  timer_active=%d timer_in_use=%d",
+                      __FUNCTION__,app_idx, mcl_idx,
+                      p_mcb->cch_timer_active, p_mcb->cch_timer.in_use);
+
+    p_mcb->cch_timer_active = TRUE;
+    if (!p_mcb->cch_timer.in_use)
+    {
+        BTIF_TRACE_DEBUG0("Start CCH timer ");
+        memset(&p_mcb->cch_timer, 0, sizeof(TIMER_LIST_ENT));
+        p_mcb->cch_timer.param = (UINT32)btif_hl_tmr_hdlr;
+        btu_start_timer(&p_mcb->cch_timer, BTU_TTYPE_USER_FUNC,
+                        BTIF_TIMEOUT_CCH_NO_DCH_SECS);
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG0("Restart CCH timer ");
+        btu_stop_timer(&p_mcb->cch_timer);
+        btu_start_timer(&p_mcb->cch_timer, BTU_TTYPE_USER_FUNC,
+                        BTIF_TIMEOUT_CCH_NO_DCH_SECS);
+    }
+
+}
+/*******************************************************************************
+**
+** Function      btif_hl_find_mdl_idx
+**
+** Description  Find the MDL index using MDL ID
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_find_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, UINT16 mdl_id,
+                                    UINT8 *p_mdl_idx)
+{
+    btif_hl_mcl_cb_t      *p_mcb  = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (p_mcb->mdl[i].in_use  &&
+            (mdl_id !=0) &&
+            (p_mcb->mdl[i].mdl_id== mdl_id))
+        {
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG4("%s found=%d mdl_id=%d mdl_idx=%d ",
+                      __FUNCTION__,found, mdl_id, i);
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_get_buf
+**
+** Description   get buffer
+**
+** Returns     void
+**
+*******************************************************************************/
+void * btif_hl_get_buf(UINT16 size)
+{
+    void *p_new;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    BTIF_TRACE_DEBUG2("ret size=%d GKI_MAX_BUF_SIZE=%d",size, 6000);
+
+    if (size < 6000)
+    {
+        p_new = GKI_getbuf(size);
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG0("btif_hl_get_buf use HL large data pool");
+        p_new = GKI_getpoolbuf(4);
+    }
+
+    return p_new;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_free_buf
+**
+** Description free buffer
+**
+** Return void
+**
+*******************************************************************************/
+void btif_hl_free_buf(void **p)
+{
+    if (*p != NULL)
+    {
+        BTIF_TRACE_DEBUG1("%s OK", __FUNCTION__ );
+        GKI_freebuf(*p);
+        *p = NULL;
+    }
+    else
+        BTIF_TRACE_ERROR1("%s NULL pointer",__FUNCTION__ );
+}
+/*******************************************************************************
+**
+** Function      btif_hl_is_the_first_reliable_existed
+**
+** Description  This function checks whether the first reliable DCH channel
+**              has been setup on the MCL or not
+**
+** Returns      BOOLEAN - TRUE exist
+**                        FALSE does not exist
+**
+*******************************************************************************/
+BOOLEAN btif_hl_is_the_first_reliable_existed(UINT8 app_idx, UINT8 mcl_idx )
+{
+    btif_hl_mcl_cb_t          *p_mcb  =BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN is_existed =FALSE;
+    UINT8 i ;
+
+    for (i=0; i< BTA_HL_NUM_MDLS_PER_MCL; i++)
+    {
+        if (p_mcb->mdl[i].in_use && p_mcb->mdl[i].is_the_first_reliable)
+        {
+            is_existed = TRUE;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG1("bta_hl_is_the_first_reliable_existed is_existed=%d  ",is_existed );
+    return is_existed;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_clean_delete_mdl
+**
+** Description   Cleanup the delete mdl control block
+**
+** Returns     Nothing
+**
+*******************************************************************************/
+static void btif_hl_clean_delete_mdl(btif_hl_delete_mdl_t *p_cb)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__ );
+    memset(p_cb, 0 , sizeof(btif_hl_delete_mdl_t));
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_clean_pcb
+**
+** Description   Cleanup the pending chan control block
+**
+** Returns     Nothing
+**
+*******************************************************************************/
+static void btif_hl_clean_pcb(btif_hl_pending_chan_cb_t *p_pcb)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__ );
+    memset(p_pcb, 0 , sizeof(btif_hl_pending_chan_cb_t));
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_clean_mdl_cb
+**
+** Description   Cleanup the MDL control block
+**
+** Returns     Nothing
+**
+*******************************************************************************/
+static void btif_hl_clean_mdl_cb(btif_hl_mdl_cb_t *p_dcb)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__ );
+    btif_hl_free_buf((void **) &p_dcb->p_rx_pkt);
+    btif_hl_free_buf((void **) &p_dcb->p_tx_pkt);
+    memset(p_dcb, 0 , sizeof(btif_hl_mdl_cb_t));
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_reset_mcb
+**
+** Description   Reset MCL control block
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static void btif_hl_clean_mcl_cb(UINT8 app_idx, UINT8 mcl_idx)
+{
+    btif_hl_mcl_cb_t     *p_mcb;
+    BTIF_TRACE_DEBUG3("%s app_idx=%d, mcl_idx=%d", __FUNCTION__,app_idx, mcl_idx);
+    p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    memset(p_mcb, 0, sizeof(btif_hl_mcl_cb_t));
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_sdp_idx_using_mdep_filter
+**
+** Description  This function finds the SDP record index using MDEP filter parameters
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static void btif_hl_reset_mdep_filter(UINT8 app_idx)
+{
+    btif_hl_app_cb_t          *p_acb  =BTIF_HL_GET_APP_CB_PTR(app_idx);
+    p_acb->filter.num_elems = 0;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_sdp_idx_using_mdep_filter
+**
+** Description  This function finds the SDP record index using MDEP filter parameters
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_find_sdp_idx_using_mdep_filter(UINT8 app_idx, UINT8 mcl_idx, UINT8 *p_sdp_idx)
+{
+    btif_hl_app_cb_t          *p_acb  =BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_mcl_cb_t          *p_mcb  =BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    UINT8                   i, j, num_recs,num_elems, num_mdeps, mdep_cnt, mdep_idx;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+    UINT16                  data_type;
+    tBTA_HL_SDP_MDEP_CFG    *p_mdep;
+    BOOLEAN                 found = FALSE;
+    BOOLEAN                 elem_found;
+
+    num_recs = p_mcb->sdp.num_recs;
+    num_elems = p_acb->filter.num_elems;
+    if (!num_elems)
+    {
+        *p_sdp_idx = 0;
+        found = TRUE;
+        return found;
+    }
+
+    for (i=0; i<num_recs; i++)
+    {
+        num_mdeps = p_mcb->sdp.sdp_rec[i].num_mdeps;
+        for (j=0; j<num_elems; j++ )
+        {
+            data_type = p_acb->filter.elem[j].data_type;
+            peer_mdep_role = p_acb->filter.elem[j].peer_mdep_role;
+            elem_found = FALSE;
+            mdep_cnt =0;
+            mdep_idx=0;
+            while (!elem_found && mdep_idx < num_mdeps )
+            {
+                p_mdep = &(p_mcb->sdp.sdp_rec[i].mdep_cfg[mdep_idx]);
+                if ( (p_mdep->data_type == data_type) &&
+                     (p_mdep->mdep_role == peer_mdep_role) )
+                {
+                    elem_found = TRUE;
+                }
+                else
+                {
+                    mdep_idx++;
+                }
+            }
+
+            if (!elem_found)
+            {
+                found = FALSE;
+                break;
+            }
+            else
+            {
+                found = TRUE;
+            }
+        }
+
+        if (found)
+        {
+            *p_sdp_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG3("%s found=%d sdp_idx=%d",__FUNCTION__ , found, *p_sdp_idx);
+
+    btif_hl_reset_mdep_filter(app_idx);
+
+    return found;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_is_reconnect_possible
+**
+** Description  check reconnect is possible or not
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_is_reconnect_possible(UINT8 app_idx, UINT8 mcl_idx,  int mdep_cfg_idx,
+                                      tBTA_HL_DCH_OPEN_PARAM *p_dch_open_api, tBTA_HL_MDL_ID *p_mdl_id)
+{
+    btif_hl_app_cb_t     *p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_mcl_cb_t     *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    tBTA_HL_DCH_CFG      local_cfg = p_dch_open_api->local_cfg;
+    tBTA_HL_DCH_MODE     dch_mode = BTA_HL_DCH_MODE_RELIABLE;
+    BOOLEAN              use_mdl_dch_mode=FALSE;
+    btif_hl_mdl_cfg_t    *p_mdl;
+    btif_hl_mdl_cfg_t    *p_mdl1;
+    UINT8                i, j;
+    BOOLEAN              is_reconnect_ok=FALSE;
+    BOOLEAN              stream_mode_avail=FALSE;
+    UINT16               data_type = p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.data_cfg[0].data_type;
+    tBTA_HL_MDEP_ID      peer_mdep_id = p_dch_open_api->peer_mdep_id;
+    UINT8                mdl_idx;
+
+
+    BTIF_TRACE_DEBUG4("%s app_idx=%d mcl_idx=%d mdep_cfg_idx=%d",
+                      __FUNCTION__, app_idx, mcl_idx, mdep_cfg_idx  );
+    switch (local_cfg)
+    {
+        case BTA_HL_DCH_CFG_NO_PREF:
+            if (!btif_hl_is_the_first_reliable_existed(app_idx, mcl_idx))
+            {
+                dch_mode = BTA_HL_DCH_MODE_RELIABLE;
+            }
+            else
+            {
+                use_mdl_dch_mode = TRUE;
+            }
+            break;
+        case BTA_HL_DCH_CFG_RELIABLE:
+            dch_mode = BTA_HL_DCH_MODE_RELIABLE;
+            break;
+        case BTA_HL_DCH_CFG_STREAMING:
+            dch_mode = BTA_HL_DCH_MODE_STREAMING;
+            break;
+        default:
+            BTIF_TRACE_ERROR1("Invalid local_cfg=%d",local_cfg );
+            return is_reconnect_ok;
+            break;
+
+    }
+
+    BTIF_TRACE_DEBUG3("local_cfg=%d use_mdl_dch_mode=%d dch_mode=%d ",
+                      local_cfg, use_mdl_dch_mode, dch_mode  );
+
+    for (i=0, p_mdl=&p_acb->mdl_cfg[0] ; i< BTA_HL_NUM_MDL_CFGS; i++, p_mdl++ )
+    {
+        if (p_mdl->base.active &&
+            p_mdl->extra.data_type ==data_type &&
+            (p_mdl->extra.peer_mdep_id != BTA_HL_INVALID_MDEP_ID && p_mdl->extra.peer_mdep_id == peer_mdep_id) &&
+            memcpy(p_mdl->base.peer_bd_addr, p_mcb->bd_addr,sizeof(BD_ADDR) ) &&
+            p_mdl->base.mdl_id &&
+            !btif_hl_find_mdl_idx(app_idx, mcl_idx,p_mdl->base.mdl_id, &mdl_idx))
+        {
+            BTIF_TRACE_DEBUG3("i=%d Matched active=%d   mdl_id =%d",
+                              i, p_mdl->base.active, p_mdl->base.mdl_id);
+            if (!use_mdl_dch_mode)
+            {
+                if (p_mdl->base.dch_mode == dch_mode)
+                {
+                    is_reconnect_ok = TRUE;
+                    *p_mdl_id = p_mdl->base.mdl_id;
+                    BTIF_TRACE_DEBUG2("reconnect is possible dch_mode=%d mdl_id=%d", dch_mode, p_mdl->base.mdl_id );
+                    break;
+                }
+            }
+            else
+            {
+                is_reconnect_ok = TRUE;
+                for (j=i, p_mdl1=&p_acb->mdl_cfg[i]; j< BTA_HL_NUM_MDL_CFGS; j++, p_mdl1++)
+                {
+                    if (p_mdl1->base.active &&
+                        p_mdl1->extra.data_type == data_type &&
+                        (p_mdl1->extra.peer_mdep_id != BTA_HL_INVALID_MDEP_ID && p_mdl1->extra.peer_mdep_id == peer_mdep_id) &&
+                        memcpy(p_mdl1->base.peer_bd_addr, p_mcb->bd_addr,sizeof(BD_ADDR)) &&
+                        p_mdl1->base.dch_mode == BTA_HL_DCH_MODE_STREAMING)
+                    {
+                        stream_mode_avail = TRUE;
+                        BTIF_TRACE_DEBUG1("found streaming mode mdl index=%d", j);
+                        break;
+                    }
+                }
+
+                if (stream_mode_avail)
+                {
+                    dch_mode = BTA_HL_DCH_MODE_STREAMING;
+                    *p_mdl_id = p_mdl1->base.mdl_id;
+                    BTIF_TRACE_DEBUG2("reconnect is ok index=%d dch_mode=streaming  mdl_id=%d", j, *p_mdl_id);
+                    break;
+                }
+                else
+                {
+                    dch_mode= p_mdl->base.dch_mode;
+                    *p_mdl_id = p_mdl->base.mdl_id;
+                    BTIF_TRACE_DEBUG3("reconnect is ok index=%d  dch_mode=%d mdl_id=%d", i,  p_mdl->base.dch_mode, *p_mdl_id);
+                    break;
+
+                }
+            }
+
+        }
+
+    }
+
+    BTIF_TRACE_DEBUG3("is_reconnect_ok  dch_mode=%d mdl_id=%d",is_reconnect_ok, dch_mode, *p_mdl_id);
+    return is_reconnect_ok;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_dch_open
+**
+** Description   Process DCH open request using the DCH Open API parameters
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_dch_open(UINT8 app_id, BD_ADDR bd_addr,
+                         tBTA_HL_DCH_OPEN_PARAM *p_dch_open_api,
+                         int mdep_cfg_idx,
+                         btif_hl_pend_dch_op_t op, int *channel_id){
+    btif_hl_app_cb_t            *p_acb;
+    btif_hl_mcl_cb_t            *p_mcb;
+    btif_hl_pending_chan_cb_t   *p_pcb;
+    UINT8                       app_idx, mcl_idx;
+    BOOLEAN                     status = FALSE;
+    tBTA_HL_MDL_ID              mdl_id;
+    tBTA_HL_DCH_RECONNECT_PARAM reconnect_param;
+
+    BTIF_TRACE_DEBUG2("%s app_id=%d ",
+                      __FUNCTION__, app_id );
+    BTIF_TRACE_DEBUG6("DB [%02x:%02x:%02x:%02x:%02x:%02x]",
+                      bd_addr[0],  bd_addr[1],bd_addr[2],  bd_addr[3], bd_addr[4],  bd_addr[5]);
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        if (btif_hl_find_mcl_idx(app_idx, bd_addr , &mcl_idx))
+        {
+            p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+            p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+            if (!p_pcb->in_use)
+            {
+                p_mcb->req_ctrl_psm = p_dch_open_api->ctrl_psm;
+
+                p_pcb->in_use = TRUE;
+                *channel_id       =
+                p_pcb->channel_id =  (int) btif_hl_get_next_channel_id(app_id);
+                p_pcb->cb_state = BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING;
+                p_pcb->mdep_cfg_idx = mdep_cfg_idx;
+                p_pcb->op = op;
+
+                if (p_mcb->sdp.num_recs)
+                {
+                    if (p_mcb->valid_sdp_idx)
+                    {
+                        p_dch_open_api->ctrl_psm  = p_mcb->ctrl_psm;
+                    }
+
+                    if (!btif_hl_is_reconnect_possible(app_idx, mcl_idx, mdep_cfg_idx, p_dch_open_api, &mdl_id ))
+                    {
+
+                        BTIF_TRACE_DEBUG0("Issue DCH open" );
+                        BTA_HlDchOpen(p_mcb->mcl_handle, p_dch_open_api);
+                    }
+                    else
+                    {
+                        reconnect_param.ctrl_psm = p_mcb->ctrl_psm;
+                        reconnect_param.mdl_id = mdl_id;;
+                        BTIF_TRACE_DEBUG2("Issue Reconnect ctrl_psm=0x%x mdl_id=0x%x",reconnect_param.ctrl_psm, reconnect_param.mdl_id   );
+                        BTA_HlDchReconnect(p_mcb->mcl_handle, &reconnect_param);
+                    }
+
+                    status = TRUE;
+                }
+                else
+                {
+                    p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+                    p_mcb->cch_oper = BTIF_HL_CCH_OP_DCH_OPEN;
+                    BTA_HlSdpQuery(p_acb->app_handle, bd_addr);
+                    status = TRUE;
+                }
+            }
+        }
+    }
+
+    BTIF_TRACE_DEBUG1("status=%d ", status);
+    return status;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_copy_bda
+**
+** Description  copy bt_bdaddr_t to BD_ADDR format
+**
+** Returns      void
+**
+*******************************************************************************/
+void btif_hl_copy_bda(bt_bdaddr_t *bd_addr, BD_ADDR  bda){
+    UINT8 i;
+    for (i=0; i<6; i++)
+    {
+        bd_addr->address[i] = bda[i] ;
+    }
+}
+/*******************************************************************************
+**
+** Function      btif_hl_copy_bda
+**
+** Description  display bt_bdaddr_t
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+void btif_hl_display_bt_bda(bt_bdaddr_t *bd_addr){
+    BTIF_TRACE_DEBUG6("DB [%02x:%02x:%02x:%02x:%02x:%02x]",
+                      bd_addr->address[0],   bd_addr->address[1], bd_addr->address[2],
+                      bd_addr->address[3],  bd_addr->address[4],   bd_addr->address[5]);
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_dch_abort
+**
+** Description      Process DCH abort request
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+void  btif_hl_dch_abort(UINT8 app_idx, UINT8 mcl_idx){
+    btif_hl_mcl_cb_t      *p_mcb;
+
+    BTIF_TRACE_DEBUG3("%s app_idx=%d mcl_idx=%d",__FUNCTION__, app_idx, mcl_idx );
+    p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    if (p_mcb->is_connected)
+    {
+        BTA_HlDchAbort(p_mcb->mcl_handle);
+    }
+    else
+    {
+        p_mcb->pcb.abort_pending = TRUE;
+    }
+
+}
+/*******************************************************************************
+**
+** Function      btif_hl_cch_open
+**
+** Description   Process CCH open request
+**
+** Returns     Nothing
+**
+*******************************************************************************/
+BOOLEAN btif_hl_cch_open(UINT8 app_id, BD_ADDR bd_addr, UINT16 ctrl_psm,
+                         int mdep_cfg_idx,
+                         btif_hl_pend_dch_op_t op, int *channel_id){
+
+    btif_hl_app_cb_t            *p_acb;
+    btif_hl_mcl_cb_t            *p_mcb;
+    btif_hl_pending_chan_cb_t   *p_pcb;
+    UINT8                       app_idx, mcl_idx, chan_idx;
+    BOOLEAN                     status = TRUE;
+
+    BTIF_TRACE_DEBUG5("%s app_id=%d ctrl_psm=%d mdep_cfg_idx=%d op=%d",
+                      __FUNCTION__, app_id, ctrl_psm, mdep_cfg_idx, op);
+    BTIF_TRACE_DEBUG6("DB [%02x:%02x:%02x:%02x:%02x:%02x]",
+                      bd_addr[0],  bd_addr[1],bd_addr[2],  bd_addr[3], bd_addr[4],  bd_addr[5]);
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+        if (!btif_hl_find_mcl_idx(app_idx, bd_addr, &mcl_idx))
+        {
+            if (btif_hl_find_avail_mcl_idx(app_idx, &mcl_idx))
+            {
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                memset(p_mcb,0, sizeof(btif_hl_mcl_cb_t));
+                p_mcb->in_use = TRUE;
+                bdcpy(p_mcb->bd_addr, bd_addr);
+
+                if (!ctrl_psm)
+                {
+                    p_mcb->cch_oper = BTIF_HL_CCH_OP_MDEP_FILTERING;
+                }
+                else
+                {
+                    p_mcb->cch_oper        = BTIF_HL_CCH_OP_MATCHED_CTRL_PSM;
+                    p_mcb->req_ctrl_psm    = ctrl_psm;
+                }
+
+                p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+                p_pcb->in_use = TRUE;
+                p_pcb->mdep_cfg_idx = mdep_cfg_idx;
+                memcpy(p_pcb->bd_addr, bd_addr, sizeof(BD_ADDR));
+                p_pcb->op = op;
+
+                switch (op)
+                {
+                    case BTIF_HL_PEND_DCH_OP_OPEN:
+                        *channel_id       =
+                        p_pcb->channel_id =  (int) btif_hl_get_next_channel_id(app_id);
+                        p_pcb->cb_state = BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING;
+                        break;
+                    case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                        p_pcb->channel_id =  p_acb->delete_mdl.channel_id;
+                        p_pcb->cb_state = BTIF_HL_CHAN_CB_STATE_DESTROYED_PENDING;
+                        break;
+                    default:
+                        break;
+                }
+                BTA_HlSdpQuery(p_acb->app_handle, bd_addr);
+            }
+            else
+            {
+                status = FALSE;
+                BTIF_TRACE_ERROR0("Open CCH request discarded- No mcl cb");
+            }
+        }
+        else
+        {
+            status = FALSE;
+            BTIF_TRACE_ERROR0("Open CCH request discarded- already in USE");
+        }
+    }
+    else
+    {
+        status = FALSE;
+        BTIF_TRACE_ERROR1("Invalid app_id=%d", app_id);
+    }
+
+    if (channel_id)
+    {
+        BTIF_TRACE_DEBUG2("status=%d channel_id=0x%08x", status, *channel_id);
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG1("status=%d ", status);
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_mdl_idx_using_handle
+**
+** Description  Find the MDL index using channel id
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_mdl_cfg_idx_using_channel_id(int channel_id,
+                                                  UINT8 *p_app_idx,
+                                                  UINT8 *p_mdl_cfg_idx){
+    btif_hl_app_cb_t      *p_acb;
+    btif_hl_mdl_cfg_t     *p_mdl;
+    BOOLEAN found=FALSE;
+    UINT8 i,j;
+    int mdl_cfg_channel_id;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(i);
+        for (j=0; j< BTA_HL_NUM_MDL_CFGS; j++)
+        {
+            p_mdl =BTIF_HL_GET_MDL_CFG_PTR(i,j);
+            mdl_cfg_channel_id = *(BTIF_HL_GET_MDL_CFG_CHANNEL_ID_PTR(i,j));
+            if (p_acb->in_use &&
+                p_mdl->base.active &&
+                (mdl_cfg_channel_id == channel_id))
+            {
+                found = TRUE;
+                *p_app_idx = i;
+                *p_mdl_cfg_idx =j;
+                break;
+            }
+        }
+    }
+
+    BTIF_TRACE_EVENT5("%s found=%d channel_id=0x%08x, app_idx=%d mdl_cfg_idx=%d  ",
+                      __FUNCTION__,found,channel_id, i,j );
+    return found;
+}
+/*******************************************************************************
+**
+** Function      btif_hl_find_mdl_idx_using_handle
+**
+** Description  Find the MDL index using channel id
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_mdl_idx_using_channel_id(int channel_id,
+                                              UINT8 *p_app_idx,UINT8 *p_mcl_idx,
+                                              UINT8 *p_mdl_idx){
+    btif_hl_app_cb_t      *p_acb;
+    btif_hl_mcl_cb_t      *p_mcb;
+    btif_hl_mdl_cb_t      *p_dcb;
+    BOOLEAN found=FALSE;
+    UINT8 i,j,k;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(i);
+        for (j=0; j< BTA_HL_NUM_MCLS; j++)
+        {
+            p_mcb =BTIF_HL_GET_MCL_CB_PTR(i,j);
+            for (k=0; k< BTA_HL_NUM_MDLS_PER_MCL; k++)
+            {
+                p_dcb =BTIF_HL_GET_MDL_CB_PTR(i,j,k);
+                if (p_acb->in_use &&
+                    p_mcb->in_use &&
+                    p_dcb->in_use &&
+                    (p_dcb->channel_id == channel_id))
+                {
+                    found = TRUE;
+                    *p_app_idx = i;
+                    *p_mcl_idx =j;
+                    *p_mdl_idx = k;
+                    break;
+                }
+            }
+        }
+    }
+    BTIF_TRACE_DEBUG5("%s found=%d app_idx=%d mcl_idx=%d mdl_idx=%d  ",
+                      __FUNCTION__,found,i,j,k );
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_channel_id_using_mdl_id
+**
+** Description  Find channel id using mdl_id'
+**
+** Returns      BOOLEAN
+*********************************************************************************/
+BOOLEAN btif_hl_find_channel_id_using_mdl_id(UINT8 app_idx, tBTA_HL_MDL_ID mdl_id,
+                                            int *p_channel_id){
+    btif_hl_app_cb_t      *p_acb;
+    btif_hl_mdl_cfg_t     *p_mdl;
+    BOOLEAN found=FALSE;
+    UINT8 j=0;
+    int mdl_cfg_channel_id;
+    p_acb =BTIF_HL_GET_APP_CB_PTR(app_idx);
+    if (p_acb && p_acb->in_use)
+        {
+            for (j=0; j< BTA_HL_NUM_MDL_CFGS; j++)
+                {
+                    p_mdl =BTIF_HL_GET_MDL_CFG_PTR(app_idx,j);
+                    mdl_cfg_channel_id = *(BTIF_HL_GET_MDL_CFG_CHANNEL_ID_PTR(app_idx,j));
+                    if ( p_mdl->base.active && (p_mdl->base.mdl_id == mdl_id))
+                    {
+                            found = TRUE;
+                            *p_channel_id = mdl_cfg_channel_id;
+                            break;
+                    }
+                }
+        }
+    BTIF_TRACE_EVENT6("%s found=%d channel_id=0x%08x, mdl_id=0x%x app_idx=%d mdl_cfg_idx=%d  ",
+                    __FUNCTION__,found,*p_channel_id,mdl_id, app_idx,j );
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_mdl_idx_using_handle
+**
+** Description  Find the MDL index using handle
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle,
+                                          UINT8 *p_app_idx,UINT8 *p_mcl_idx,
+                                          UINT8 *p_mdl_idx){
+    btif_hl_app_cb_t      *p_acb;
+    btif_hl_mcl_cb_t      *p_mcb;
+    btif_hl_mdl_cb_t      *p_dcb;
+    BOOLEAN found=FALSE;
+    UINT8 i,j,k;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(i);
+        for (j=0; j< BTA_HL_NUM_MCLS; j++)
+        {
+            p_mcb =BTIF_HL_GET_MCL_CB_PTR(i,j);
+            for (k=0; k< BTA_HL_NUM_MDLS_PER_MCL; k++)
+            {
+                p_dcb =BTIF_HL_GET_MDL_CB_PTR(i,j,k);
+                if (p_acb->in_use &&
+                    p_mcb->in_use &&
+                    p_dcb->in_use &&
+                    (p_dcb->mdl_handle == mdl_handle))
+                {
+                    found = TRUE;
+                    *p_app_idx = i;
+                    *p_mcl_idx =j;
+                    *p_mdl_idx = k;
+                    break;
+                }
+            }
+        }
+    }
+
+
+    BTIF_TRACE_EVENT5("%s found=%d app_idx=%d mcl_idx=%d mdl_idx=%d  ",
+                      __FUNCTION__,found,i,j,k );
+    return found;
+}
+/*******************************************************************************
+**
+** Function        btif_hl_find_peer_mdep_id
+**
+** Description      Find the peer MDEP ID from the received SPD records
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_find_peer_mdep_id(UINT8 app_id, BD_ADDR bd_addr,
+                                         tBTA_HL_MDEP_ROLE local_mdep_role,
+                                         UINT16 data_type,
+                                         tBTA_HL_MDEP_ID *p_peer_mdep_id){
+    UINT8               app_idx, mcl_idx;
+    btif_hl_app_cb_t     *p_acb;
+    btif_hl_mcl_cb_t     *p_mcb;
+    tBTA_HL_SDP_REC     *p_rec;
+    UINT8               i, num_mdeps;
+    BOOLEAN             found = FALSE;
+    tBTA_HL_MDEP_ROLE   peer_mdep_role;
+
+
+    BTIF_TRACE_DEBUG4("%s app_id=%d local_mdep_role=%d, data_type=%d",
+                      __FUNCTION__, app_id, local_mdep_role, data_type);
+
+    BTIF_TRACE_DEBUG6("DB [%02x:%02x:%02x:%02x:%02x:%02x]",
+                      bd_addr[0],  bd_addr[1],
+                      bd_addr[2],  bd_addr[3],
+                      bd_addr[4],  bd_addr[5]);
+
+
+    BTIF_TRACE_DEBUG1("local_mdep_role=%d", local_mdep_role);
+    BTIF_TRACE_DEBUG1("data_type=%d", data_type);
+
+    if (local_mdep_role == BTA_HL_MDEP_ROLE_SINK)
+        peer_mdep_role = BTA_HL_MDEP_ROLE_SOURCE;
+    else
+        peer_mdep_role = BTA_HL_MDEP_ROLE_SINK;
+
+    if (btif_hl_find_app_idx(app_id, &app_idx) )
+    {
+        p_acb  = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        if (btif_hl_find_mcl_idx(app_idx, bd_addr, &mcl_idx))
+        {
+            p_mcb  =BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+            BTIF_TRACE_DEBUG2("app_idx=%d mcl_idx=%d",app_idx, mcl_idx);
+            BTIF_TRACE_DEBUG2("valid_spd_idx=%d sdp_idx=%d",p_mcb->valid_sdp_idx, p_mcb->sdp_idx);
+            if (p_mcb->valid_sdp_idx)
+            {
+                p_rec = &p_mcb->sdp.sdp_rec[p_mcb->sdp_idx];
+                num_mdeps = p_rec->num_mdeps;
+                BTIF_TRACE_DEBUG1("num_mdeps=%d", num_mdeps);
+
+                for (i=0; i< num_mdeps; i++)
+                {
+                    BTIF_TRACE_DEBUG2("p_rec->mdep_cfg[%d].mdep_role=%d",i, p_rec->mdep_cfg[i].mdep_role);
+                    BTIF_TRACE_DEBUG2("p_rec->mdep_cfg[%d].data_type =%d",i, p_rec->mdep_cfg[i].data_type );
+                    if ((p_rec->mdep_cfg[i].mdep_role == peer_mdep_role) &&
+                        (p_rec->mdep_cfg[i].data_type == data_type))
+                    {
+                        found = TRUE;
+                        *p_peer_mdep_id = p_rec->mdep_cfg[i].mdep_id;
+                        break;
+                    }
+                }
+            }
+        }
+    }
+
+    BTIF_TRACE_DEBUG2("found =%d  *p_peer_mdep_id=%d", found,  *p_peer_mdep_id);
+
+    return found;
+}
+/*******************************************************************************
+**
+** Function        btif_hl_find_local_mdep_id
+**
+** Description      Find the local MDEP ID from the MDEP configuration
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_find_local_mdep_id(UINT8 app_id,
+                                          tBTA_HL_MDEP_ROLE local_mdep_role,
+                                          UINT16 mdep_data_type,
+                                          tBTA_HL_MDEP_ID *p_local_mdep_id){
+    UINT8 app_idx;
+    btif_hl_app_cb_t      *p_acb;
+    UINT8  i,j;
+    BOOLEAN found = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_app_idx(app_id, &app_idx) )
+    {
+        p_acb  =BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+        for (i=0; i< p_acb->sup_feature.num_of_mdeps; i++)
+        {
+            if (p_acb->sup_feature.mdep[i].mdep_cfg.mdep_role == local_mdep_role )
+            {
+                for (j=0; j< p_acb->sup_feature.mdep[i].mdep_cfg.num_of_mdep_data_types; j++)
+                {
+                    if ( p_acb->sup_feature.mdep[i].mdep_cfg.data_cfg[j].data_type == mdep_data_type)
+                    {
+                        found = TRUE;
+                        *p_local_mdep_id = p_acb->sup_feature.mdep[i].mdep_id;
+                        return found;
+                    }
+                }
+            }
+        }
+
+
+    }
+    BTIF_TRACE_DEBUG2("found=%d local mdep id=%d", found, *p_local_mdep_id );
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_mdep_cfg_idx
+**
+** Description  Find the MDEP configuration index using local MDEP_ID
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static  BOOLEAN btif_hl_find_mdep_cfg_idx(UINT8 app_idx,  tBTA_HL_MDEP_ID local_mdep_id,
+                                          UINT8 *p_mdep_cfg_idx){
+    btif_hl_app_cb_t      *p_acb =BTIF_HL_GET_APP_CB_PTR(app_idx);
+    tBTA_HL_SUP_FEATURE     *p_sup_feature= &p_acb->sup_feature;
+    BOOLEAN found =FALSE;
+    UINT8 i;
+
+    for (i=0; i< p_sup_feature->num_of_mdeps; i++)
+    {
+        if ( p_sup_feature->mdep[i].mdep_id == local_mdep_id)
+        {
+            found = TRUE;
+            *p_mdep_cfg_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG4("%s found=%d mdep_idx=%d local_mdep_id=%d ",
+                      __FUNCTION__, found,i, local_mdep_id );
+    return found;
+}
+
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_mcl_idx
+**
+** Description  Find the MCL index using BD address
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx){
+    BOOLEAN found=FALSE;
+    UINT8 i;
+    btif_hl_app_cb_t  *p_acb =BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_mcl_cb_t  *p_mcb;
+
+    for (i=0; i < BTA_HL_NUM_MCLS ; i ++)
+    {
+        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, i);
+        if (p_mcb->in_use &&
+            (!memcmp (p_mcb->bd_addr, p_bd_addr, BD_ADDR_LEN)))
+        {
+            found = TRUE;
+            *p_mcl_idx = i;
+            break;
+        }
+    }
+
+
+    BTIF_TRACE_DEBUG3("%s found=%d idx=%d",__FUNCTION__, found, i);
+    return found;
+}
+/*******************************************************************************
+**
+** Function         btif_hl_init
+**
+** Description      HL initialization function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_init(void){
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    memset(p_btif_hl_cb, 0, sizeof(btif_hl_cb_t));
+    btif_hl_init_next_app_id();
+    btif_hl_init_next_channel_id();
+}
+/*******************************************************************************
+**
+** Function         btif_hl_disable
+**
+** Description      Disable initialization function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_disable(void){
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if ((p_btif_hl_cb->state != BTIF_HL_STATE_DISABLING) &&
+        (p_btif_hl_cb->state != BTIF_HL_STATE_DISABLED))
+    {
+        btif_hl_set_state(BTIF_HL_STATE_DISABLING);
+        BTA_HlDisable();
+    }
+}
+/*******************************************************************************
+**
+** Function      btif_hl_is_no_active_app
+**
+** Description  Find whether or not  any APP is still in use
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_is_no_active_app(void){
+    BOOLEAN no_active_app = TRUE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (btif_hl_cb.acb[i].in_use)
+        {
+            no_active_app = FALSE;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG2("%s no_active_app=%d  ", __FUNCTION__, no_active_app );
+    return no_active_app;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_free_app_idx
+**
+** Description free an application control block
+**
+** Returns      void
+**
+*******************************************************************************/
+static void btif_hl_free_app_idx(UINT8 app_idx){
+
+    if ((app_idx < BTA_HL_NUM_APPS) && btif_hl_cb.acb[app_idx].in_use )
+    {
+        btif_hl_cb.acb[app_idx].in_use = FALSE;
+        memset (&btif_hl_cb.acb[app_idx], 0, sizeof(btif_hl_app_cb_t));
+    }
+}
+/*******************************************************************************
+**
+** Function      btif_hl_set_state
+**
+** Description set HL state
+**
+** Returns      void
+**
+*******************************************************************************/
+static void btif_hl_set_state(btif_hl_state_t state){
+    BTIF_TRACE_DEBUG2("btif_hl_set_state:  %d ---> %d ", p_btif_hl_cb->state, state);
+    p_btif_hl_cb->state = state;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_set_state
+**
+** Description get HL state
+**
+** Returns      btif_hl_state_t
+**
+*******************************************************************************/
+
+static btif_hl_state_t btif_hl_get_state(void){
+    BTIF_TRACE_DEBUG1("btif_hl_get_state:  %d   ", p_btif_hl_cb->state);
+    return p_btif_hl_cb->state;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_data_type_idx
+**
+** Description  Find the index in the data type table
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN  btif_hl_find_data_type_idx(UINT16 data_type, UINT8 *p_idx){
+    BOOLEAN found = FALSE;
+    UINT8 i;
+
+    for (i=0; i< BTIF_HL_DATA_TABLE_SIZE; i++ )
+    {
+        if (data_type_table[i].data_type == data_type)
+        {
+            found = TRUE;
+            *p_idx= i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG4("%s found=%d, data_type=0x%x idx=%d", __FUNCTION__, found, data_type, i);
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_get_max_tx_apdu_size
+**
+** Description  Find the maximum TX APDU size for the specified data type and
+**              MDEP role
+**
+** Returns      UINT16
+**
+*******************************************************************************/
+UINT16  btif_hl_get_max_tx_apdu_size(tBTA_HL_MDEP_ROLE mdep_role,
+                                     UINT16 data_type ){
+    UINT8 idx;
+    UINT16 max_tx_apdu_size =0;
+
+    if (btif_hl_find_data_type_idx(data_type, &idx))
+    {
+        if (mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+        {
+            max_tx_apdu_size = data_type_table[idx].max_tx_apdu_size;
+        }
+        else
+        {
+            max_tx_apdu_size = data_type_table[idx].max_rx_apdu_size;
+        }
+    }
+    else
+    {
+        if (mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+        {
+            max_tx_apdu_size = BTIF_HL_DEFAULT_SRC_TX_APDU_SIZE;
+        }
+        else
+        {
+            max_tx_apdu_size = BTIF_HL_DEFAULT_SRC_RX_APDU_SIZE;
+        }
+
+
+    }
+
+    BTIF_TRACE_DEBUG4("%s mdep_role=%d data_type=0x%4x size=%d",
+                      __FUNCTION__, mdep_role, data_type, max_tx_apdu_size);
+    return max_tx_apdu_size;
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_get_max_rx_apdu_size
+**
+** Description  Find the maximum RX APDU size for the specified data type and
+**              MDEP role
+**
+** Returns      UINT16
+**
+*******************************************************************************/
+UINT16  btif_hl_get_max_rx_apdu_size(tBTA_HL_MDEP_ROLE mdep_role,
+                                     UINT16 data_type ){
+    UINT8  idx;
+    UINT16 max_rx_apdu_size =0;
+
+    if (btif_hl_find_data_type_idx(data_type, &idx))
+    {
+        if (mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+        {
+            max_rx_apdu_size = data_type_table[idx].max_rx_apdu_size;
+        }
+        else
+        {
+            max_rx_apdu_size = data_type_table[idx].max_tx_apdu_size;
+        }
+    }
+    else
+    {
+        if (mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+        {
+            max_rx_apdu_size = BTIF_HL_DEFAULT_SRC_RX_APDU_SIZE;
+        }
+        else
+        {
+            max_rx_apdu_size = BTIF_HL_DEFAULT_SRC_TX_APDU_SIZE;
+        }
+    }
+
+
+    BTIF_TRACE_DEBUG4("%s mdep_role=%d data_type=0x%4x size=%d",
+                      __FUNCTION__, mdep_role, data_type, max_rx_apdu_size);
+
+    return max_rx_apdu_size;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_if_channel_setup_pending
+**
+** Description
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+
+static BOOLEAN btif_hl_get_bta_mdep_role(bthl_mdep_role_t mdep, tBTA_HL_MDEP_ROLE *p){
+    BOOLEAN status = TRUE;
+    switch (mdep)
+    {
+        case BTHL_MDEP_ROLE_SOURCE:
+            *p = BTA_HL_MDEP_ROLE_SOURCE;
+            break;
+        case BTHL_MDEP_ROLE_SINK:
+            *p = BTA_HL_MDEP_ROLE_SINK;
+            break;
+        default:
+            status = FALSE;
+            break;
+    }
+
+    BTIF_TRACE_DEBUG4("%s status=%d bta_mdep_role=%d (%d:btif)",
+                      __FUNCTION__, status, *p, mdep);
+    return status;
+}
+/*******************************************************************************
+**
+** Function btif_hl_get_bta_channel_type
+**
+** Description convert bthl channel type to BTA DCH channel type
+**
+** Returns BOOLEAN
+**
+*******************************************************************************/
+
+static BOOLEAN btif_hl_get_bta_channel_type(bthl_channel_type_t channel_type, tBTA_HL_DCH_CFG *p){
+    BOOLEAN status = TRUE;
+    switch (channel_type)
+    {
+        case BTHL_CHANNEL_TYPE_RELIABLE:
+            *p = BTA_HL_DCH_CFG_RELIABLE;
+            break;
+        case BTHL_CHANNEL_TYPE_STREAMING:
+            *p = BTA_HL_DCH_CFG_STREAMING;
+            break;
+        case BTHL_CHANNEL_TYPE_ANY:
+            *p = BTA_HL_DCH_CFG_NO_PREF;
+            break;
+        default:
+            status = FALSE;
+            break;
+    }
+    BTIF_TRACE_DEBUG3("%s status = %d BTA DCH CFG=%d (1-rel 2-strm",
+                      __FUNCTION__, status, *p);
+    return status;
+}
+/*******************************************************************************
+**
+** Function btif_hl_get_next_app_id
+**
+** Description get next applcation id
+**
+** Returns UINT8
+**
+*******************************************************************************/
+
+static UINT8 btif_hl_get_next_app_id(){
+    UINT8 next_app_id = btif_hl_cb.next_app_id;
+
+    btif_hl_cb.next_app_id++;
+    return next_app_id;
+}
+/*******************************************************************************
+**
+** Function btif_hl_get_next_channel_id
+**
+** Description get next channel id
+**
+** Returns int
+**
+*******************************************************************************/
+static int btif_hl_get_next_channel_id(UINT8 app_id){
+    UINT16 next_channel_id = btif_hl_cb.next_channel_id;
+    int channel_id;
+    btif_hl_cb.next_channel_id++;
+    channel_id = (app_id << 16) + next_channel_id;
+    BTIF_TRACE_DEBUG4("%s channel_id=0x%08x, app_id=0x%02x next_channel_id=0x%04x", __FUNCTION__,
+                      channel_id, app_id,  next_channel_id);
+    return channel_id;
+}
+/*******************************************************************************
+**
+** Function btif_hl_get_app_id
+**
+** Description get the applicaiton id associated with the channel id
+**
+** Returns UINT8
+**
+*******************************************************************************/
+
+static UINT8 btif_hl_get_app_id(int channel_id){
+    UINT8 app_id =(UINT8) (channel_id >> 16);
+    BTIF_TRACE_DEBUG3("%s channel_id=0x%08x, app_id=0x%02x ", __FUNCTION__,channel_id, app_id);
+    return app_id;
+}
+/*******************************************************************************
+**
+** Function btif_hl_init_next_app_id
+**
+** Description initialize the application id
+**
+** Returns void
+**
+*******************************************************************************/
+static void btif_hl_init_next_app_id(void){
+    btif_hl_cb.next_app_id = 1;
+}
+/*******************************************************************************
+**
+** Function btif_hl_init_next_channel_id
+**
+** Description initialize the channel id
+**
+** Returns void
+**
+*******************************************************************************/
+static void btif_hl_init_next_channel_id(void){
+    btif_hl_cb.next_channel_id = 1;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_save_mdl_cfg
+**
+** Description  Save the MDL configuration
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN  btif_hl_save_mdl_cfg(UINT8 app_id, UINT8 item_idx,
+                              tBTA_HL_MDL_CFG *p_mdl_cfg){
+    btif_hl_mdl_cfg_t   *p_mdl=NULL;
+    BOOLEAN             success = FALSE;
+    btif_hl_app_cb_t    *p_acb;
+    btif_hl_mcl_cb_t    *p_mcb;
+    UINT8               app_idx, mcl_idx, mdl_idx, len;
+    bt_status_t         bt_status;
+    btif_hl_evt_cb_t    evt_param;
+    int                 *p_channel_id;
+
+    BTIF_TRACE_DEBUG6("%s app_ids=%d item_idx=%d, local_mdep_id=%d mdl_id=0x%x dch_mode=%d",
+                      __FUNCTION__, app_id, item_idx, p_mdl_cfg->local_mdep_id,
+                      p_mdl_cfg->mdl_id, p_mdl_cfg->dch_mode );
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mdl = BTIF_HL_GET_MDL_CFG_PTR(app_idx, item_idx);
+        p_channel_id = BTIF_HL_GET_MDL_CFG_CHANNEL_ID_PTR(app_idx, item_idx);
+        if (p_mdl)
+        {
+            memcpy(&p_mdl->base, p_mdl_cfg, sizeof(tBTA_HL_MDL_CFG));
+            if (btif_hl_find_mcl_idx(app_idx, p_mdl->base.peer_bd_addr , &mcl_idx))
+            {
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                if (p_mcb->pcb.in_use)
+                    *p_channel_id = p_mcb->pcb.channel_id;
+                else
+                    *p_channel_id = btif_hl_get_next_channel_id(p_acb->app_id);
+                p_mdl->extra.mdep_cfg_idx = p_mcb->pcb.mdep_cfg_idx;
+                p_mdl->extra.data_type = p_acb->sup_feature.mdep[p_mcb->pcb.mdep_cfg_idx].mdep_cfg.data_cfg[0].data_type;
+
+                if (!btif_hl_find_peer_mdep_id(p_acb->app_id, p_mcb->bd_addr,
+                                               p_acb->sup_feature.mdep[p_mcb->pcb.mdep_cfg_idx].mdep_cfg.mdep_role,
+                                               p_acb->sup_feature.mdep[p_mcb->pcb.mdep_cfg_idx].mdep_cfg.data_cfg[0].data_type,
+                                               &p_mdl->extra.peer_mdep_id))
+                {
+                    p_mdl->extra.peer_mdep_id = BTA_HL_INVALID_MDEP_ID;
+                }
+                BTIF_TRACE_DEBUG4("%s app_idx=%d item_idx=%d mld_id=0x%x",
+                                  __FUNCTION__, app_idx, item_idx, p_mdl->base.mdl_id);
+                evt_param.update_mdl.app_idx = app_idx;
+                len = sizeof(btif_hl_update_mdl_t);
+                BTIF_TRACE_DEBUG1("send BTIF_HL_UPDATE_MDL event app_idx=%d  ",app_idx);
+                if ((bt_status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_UPDATE_MDL,
+                                                        (char*) &evt_param, len, NULL)) == BT_STATUS_SUCCESS)
+                {
+                    success = TRUE;
+                }
+                ASSERTC(bt_status == BT_STATUS_SUCCESS, "context transfer failed", bt_status);
+            }
+        }
+    }
+    BTIF_TRACE_DEBUG2("%s success=%d  ",__FUNCTION__, success );
+
+    return success;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_delete_mdl_cfg
+**
+** Description  Delete the MDL configuration
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN  btif_hl_delete_mdl_cfg(UINT8 app_id, UINT8 item_idx){
+    btif_hl_mdl_cfg_t     *p_mdl=NULL;
+    BOOLEAN             success = FALSE;
+    btif_hl_app_cb_t      *p_acb;
+    UINT8               app_idx, len;
+    bt_status_t         bt_status;
+    btif_hl_evt_cb_t    evt_param;
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+        p_mdl = BTIF_HL_GET_MDL_CFG_PTR(app_idx, item_idx);
+        if (p_mdl)
+        {
+            memset(p_mdl, 0, sizeof(btif_hl_mdl_cfg_t));
+            evt_param.update_mdl.app_idx = app_idx;
+            len = sizeof(btif_hl_update_mdl_t);
+            BTIF_TRACE_DEBUG1("send BTIF_HL_UPDATE_MDL event app_idx=%d  ",app_idx);
+            if ((bt_status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_UPDATE_MDL,
+                                                    (char*) &evt_param, len, NULL)) == BT_STATUS_SUCCESS)
+            {
+                success = TRUE;
+            }
+            ASSERTC(bt_status == BT_STATUS_SUCCESS, "context transfer failed", bt_status);
+        }
+    }
+
+    BTIF_TRACE_DEBUG2("%s success=%d  ",__FUNCTION__, success );
+    return success;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_app_idx_using_handle
+**
+** Description  Find the applicaiton index using handle
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_app_idx_using_handle(tBTA_HL_APP_HANDLE app_handle,
+                                          UINT8 *p_app_idx){
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (btif_hl_cb.acb[i].in_use &&
+            (btif_hl_cb.acb[i].app_handle == app_handle))
+        {
+            found = TRUE;
+            *p_app_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_EVENT4("%s status=%d handle=%d app_idx=%d ",
+                      __FUNCTION__, found, app_handle , i);
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_mcl_idx_using_handle
+**
+** Description  Find the MCL index using handle
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle,
+                                           UINT8 *p_app_idx, UINT8 *p_mcl_idx){
+    btif_hl_app_cb_t  *p_acb;
+    BOOLEAN         found=FALSE;
+    UINT8 i,j;
+
+    for (i=0; i<BTA_HL_NUM_APPS; i++)
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(i);
+        for (j=0; j < BTA_HL_NUM_MCLS ; j++)
+        {
+            if (p_acb->mcb[j].in_use &&
+                (p_acb->mcb[j].mcl_handle == mcl_handle))
+            {
+                found = TRUE;
+                *p_app_idx = i;
+                *p_mcl_idx = j;
+                break;
+            }
+        }
+    }
+    BTIF_TRACE_DEBUG4("%s found=%d app_idx=%d mcl_idx=%d",__FUNCTION__,
+                      found, i, j);
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_app_idx
+**
+** Description  Find the application index using application ID
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx){
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+
+        if (btif_hl_cb.acb[i].in_use &&
+            (btif_hl_cb.acb[i].app_id == app_id))
+        {
+            found = TRUE;
+            *p_app_idx = i;
+            break;
+        }
+    }
+    BTIF_TRACE_DEBUG3("%s found=%d app_idx=%d", __FUNCTION__, found, i );
+
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_avail_mdl_idx
+**
+** Description  Find a not in-use MDL index
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                   UINT8 *p_mdl_idx){
+    btif_hl_mcl_cb_t      *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        if (!p_mcb->mdl[i].in_use)
+        {
+            btif_hl_clean_mdl_cb(&p_mcb->mdl[i]);
+            found = TRUE;
+            *p_mdl_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG3("%s found=%d idx=%d",__FUNCTION__, found, i);
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_avail_mcl_idx
+**
+** Description  Find a not in-use MDL index
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx){
+    BOOLEAN found=FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_MCLS ; i ++)
+    {
+        if (!btif_hl_cb.acb[app_idx].mcb[i].in_use)
+        {
+            found = TRUE;
+            *p_mcl_idx = i;
+            break;
+        }
+    }
+    BTIF_TRACE_DEBUG3("%s found=%d app_idx=%d", __FUNCTION__, found, i);
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function      btif_hl_find_avail_app_idx
+**
+** Description  Find a not in-use APP index
+**
+** Returns      BOOLEAN
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_find_avail_app_idx(UINT8 *p_idx){
+    BOOLEAN found = FALSE;
+    UINT8 i;
+
+    for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+    {
+        if (!btif_hl_cb.acb[i].in_use)
+        {
+            found = TRUE;
+            *p_idx = i;
+            break;
+        }
+    }
+
+    BTIF_TRACE_DEBUG3("%s found=%d app_idx=%d", __FUNCTION__, found, i);
+    return found;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dereg_cfm
+**
+** Description      Process the de-registration confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dereg_cfm(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t        *p_acb;
+    UINT8                   app_idx;
+    int                     app_id = 0;
+    bthl_app_reg_state_t    state = BTHL_APP_REG_STATE_DEREG_SUCCESS;
+    BTIF_TRACE_DEBUG3("%s de-reg status=%d app_handle=%d", __FUNCTION__, p_data->dereg_cfm.status, p_data->dereg_cfm.app_handle);
+
+    if (btif_hl_find_app_idx_using_handle(p_data->dereg_cfm.app_handle, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        app_id = (int) p_acb->app_id;
+        if (p_data->dereg_cfm.status == BTA_HL_STATUS_OK)
+            memset(p_acb, 0,sizeof(btif_hl_app_cb_t));
+        else
+            state = BTHL_APP_REG_STATE_DEREG_FAILED;
+
+        BTIF_TRACE_DEBUG2("call reg state callback app_id=%d state=%d", app_id, state);
+        BTIF_HL_CALL_CBACK(bt_hl_callbacks, app_reg_state_cb, app_id, state );
+
+        if (btif_hl_is_no_active_app())
+        {
+            btif_hl_disable();
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_find_non_ative_app_nv_idx
+**
+** Description      find a non-active applicaiton NV index
+**
+** Returns          BOOLEAN TRUE-found
+**
+*******************************************************************************/
+
+BOOLEAN btif_hl_find_non_ative_app_nv_idx(UINT8 *p_idx){
+    BOOLEAN   found = FALSE;
+    UINT8 i, cur_nv_idx=0;
+    UINT16 cur_use_freq =0xFFFF;
+    btif_hl_app_data_t *p_data;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (!GKI_queue_is_empty(&p_ncb->app_queue))
+    {
+        p_data = (btif_hl_app_data_t *)GKI_getfirst((void *)&p_ncb->app_queue);
+        while (p_data != NULL)
+        {
+            if (!p_data->active)
+            {
+                found = TRUE;
+                /* find least used app_nv_idx */
+                if (cur_use_freq >= p_ncb->app_cb.app[p_data->app_nv_idx].use_freq)
+                {
+                    cur_use_freq =  p_ncb->app_cb.app[p_data->app_nv_idx].use_freq;
+                    *p_idx = p_data->app_nv_idx;
+                }
+            }
+            p_data = (btif_hl_app_data_t *)GKI_getnext((void *)p_data);
+        }
+    }
+
+
+    BTIF_TRACE_DEBUG2(" found=%d idx=%d", found , *p_idx);
+    return found;
+}
+/*******************************************************************************
+**
+** Function btif_hl_find_avail_app_nv_idx
+**
+** Description  find a not in use applicaiton NV index
+**
+** Returns BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_find_avail_app_nv_idx(UINT8 *p_idx){
+    BOOLEAN   found = FALSE;
+    UINT8 i, first_idx;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    for (i=0;i<BTIF_HL_NV_MAX_APPS; i++)
+    {
+        if (!p_ncb->app_cb.app[i].in_use)
+        {
+            found = TRUE;
+            *p_idx = i;
+            break;
+        }
+    }
+
+    if (!found )
+        btif_hl_find_non_ative_app_nv_idx (p_idx);
+
+    BTIF_TRACE_DEBUG2(" found=%d idx=%d", found , *p_idx);
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_save_app_data
+**
+** Description  Save an applicaiton registration data into NV
+**
+** Returns BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_save_app_data(UINT8 app_idx){
+    BOOLEAN                 status = FALSE;
+    btif_hl_app_cb_t        *p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_app_data_t      *p_data = GKI_getbuf((UINT16)sizeof( btif_hl_app_data_t));
+    btif_hl_nv_app_data_t   *p_app;
+    UINT8                   app_nv_idx;
+    bt_status_t             bt_status;
+
+    BTIF_TRACE_DEBUG4("%s app_idx=%d p_acb=0x%x p_data=0x%x", __FUNCTION__, app_idx, p_acb, p_data);
+
+    if (p_acb && p_data && btif_hl_find_avail_app_nv_idx(&app_nv_idx))
+    {
+        BTIF_TRACE_DEBUG1("app_nv_idx=%d  ",app_nv_idx );
+        p_app = &p_data->app_data;
+
+        memcpy(p_app->application_name, p_acb->application_name, (BTIF_HL_APPLICATION_NAME_LEN +1) );
+        memcpy(p_app->provider_name, p_acb->provider_name, (BTA_PROVIDER_NAME_LEN +1) );
+        memcpy(p_app->srv_name, p_acb->srv_name, (BTA_SERVICE_NAME_LEN +1) );
+        memcpy(p_app->srv_desp, p_acb->srv_desp, (BTA_SERVICE_DESP_LEN +1) );
+        memcpy(p_app->channel_type, p_acb->channel_type, (sizeof(tBTA_HL_DCH_CFG)*BTA_HL_NUM_MDEPS));
+        memcpy((void *) &p_app->sup_feature, (void *) &p_acb->sup_feature, sizeof(tBTA_HL_SUP_FEATURE));
+
+
+        if ((bt_status = btif_storage_write_hl_app_data(app_nv_idx,(char *) p_app,
+                                                        sizeof(btif_hl_nv_app_data_t)))== BT_STATUS_SUCCESS)
+        {
+            if ((bt_status = btif_storage_write_hl_mdl_data(app_nv_idx,(char *) &p_acb->mdl_cfg[0],
+                                                            sizeof(btif_hl_nv_mdl_data_t)))== BT_STATUS_SUCCESS)
+            {
+                p_ncb->app_cb.app[app_nv_idx].in_use = TRUE;
+                p_ncb->app_cb.app[app_nv_idx].use_freq = 1;
+                if ((bt_status = btif_storage_write_hl_apps_cb((char *) &p_ncb->app_cb,
+                                                               sizeof(btif_hl_nv_app_cb_t)))== BT_STATUS_SUCCESS)
+                {
+                    status = TRUE;
+                    p_data->active = TRUE;
+                    p_acb->app_nv_idx  =
+                    p_data->app_nv_idx = app_nv_idx;
+                    p_data->app_idx = app_idx;
+
+                    BTIF_TRACE_DEBUG2("p_data active=TRUE app_nv_idx =%d app_idx=%d ",app_nv_idx, app_idx );
+                    GKI_enqueue(&p_ncb->app_queue,p_data);
+
+
+                }
+                else
+                {
+                    p_ncb->app_cb.app[app_nv_idx].in_use = FALSE;
+                }
+            }
+        }
+    }
+
+    if (!status)
+        btif_hl_free_buf((void **) &p_data);
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_reg_cfm
+**
+** Description      Process the registration confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_reg_cfm(tBTA_HL *p_data){
+    btif_hl_app_cb_t       *p_acb;
+    UINT8                  app_idx;
+    bthl_app_reg_state_t   state = BTHL_APP_REG_STATE_REG_SUCCESS;
+    bt_status_t            bt_status;
+
+    BTIF_TRACE_DEBUG3("%s reg status=%d app_handle=%d", __FUNCTION__, p_data->reg_cfm.status, p_data->reg_cfm.app_handle);
+
+    if (btif_hl_find_app_idx(p_data->reg_cfm.app_id, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+        if (p_data->reg_cfm.status == BTA_HL_STATUS_OK)
+        {
+            p_acb->app_handle = p_data->reg_cfm.app_handle;
+            BTIF_TRACE_DEBUG1("is_new_app=%d", p_acb->is_new_app);
+            if (p_acb->is_new_app)
+            {
+                p_acb->is_new_app = FALSE;
+                if (!btif_hl_save_app_data(app_idx))
+                {
+                    ASSERTC(FALSE, "Unable to save app data app_idx=%d", app_idx);
+                    state = BTHL_APP_REG_STATE_REG_FAILED;
+                }
+            }
+            else
+            {
+                BTIF_TRACE_DEBUG3("Increase the use freq app_idx=%d app_nv_idx=%d cur_use_freq=%d",
+                                  app_idx, p_acb->app_nv_idx, p_ncb->app_cb.app[p_acb->app_nv_idx].use_freq);
+                if (p_ncb->app_cb.app[p_acb->app_nv_idx].use_freq != 0xFFFF )
+                    p_ncb->app_cb.app[p_acb->app_nv_idx].use_freq ++;
+
+                p_ncb->app_cb.app[p_acb->app_nv_idx].in_use = TRUE;
+                if ((bt_status = btif_storage_write_hl_apps_cb((char *) &p_ncb->app_cb,
+                                                               sizeof(btif_hl_nv_app_cb_t)))!= BT_STATUS_SUCCESS)
+                {
+                    ASSERTC(bt_status == BT_STATUS_SUCCESS, "Unable to save app_cb into NV app_nv_idx=%d ", p_acb->app_nv_idx);
+                    state = BTHL_APP_REG_STATE_REG_FAILED;
+                }
+            }
+
+            if (state == BTHL_APP_REG_STATE_REG_FAILED)
+            {
+                BTA_HlDeregister(p_acb->app_handle);
+                btif_hl_free_app_idx(app_idx);
+            }
+        }
+        else
+        {
+            btif_hl_free_app_idx(app_idx);
+            state = BTHL_APP_REG_STATE_REG_FAILED;
+        }
+
+        BTIF_TRACE_DEBUG3("%s call reg state callback app_id=%d reg state=%d", __FUNCTION__,  p_data->reg_cfm.app_id, state);
+        BTIF_HL_CALL_CBACK(bt_hl_callbacks, app_reg_state_cb, ((int) p_data->reg_cfm.app_id), state );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_sdp_info_ind
+**
+** Description      Process the SDP info indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_sdp_info_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t         *p_acb;
+    UINT8                   app_idx;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (btif_hl_find_app_idx_using_handle(p_data->sdp_info_ind.app_handle, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        memcpy(&p_acb->sdp_info_ind, &p_data->sdp_info_ind, sizeof(tBTA_HL_SDP_INFO_IND));
+    }
+}
+/*******************************************************************************
+**
+** Function btif_hl_set_chan_cb_state
+**
+** Description set the channel callback state
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_set_chan_cb_state(UINT8 app_idx, UINT8 mcl_idx, btif_hl_chan_cb_state_t state){
+    btif_hl_pending_chan_cb_t   *p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+    btif_hl_chan_cb_state_t cur_state = p_pcb->cb_state;
+
+    if (cur_state != state)
+    {
+        p_pcb->cb_state = state;
+        BTIF_TRACE_DEBUG3("%s state %d--->%d",__FUNCTION__, cur_state, state);
+    }
+
+
+}
+/*******************************************************************************
+**
+** Function btif_hl_send_destroyed_cb
+**
+** Description send the channel destroyed callback
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_send_destroyed_cb(btif_hl_app_cb_t        *p_acb ){
+    bt_bdaddr_t     bd_addr;
+    int             app_id = (int) btif_hl_get_app_id(p_acb->delete_mdl.channel_id);
+
+    btif_hl_copy_bda(&bd_addr, p_acb->delete_mdl.bd_addr);
+    BTIF_TRACE_DEBUG1("%s",__FUNCTION__);
+    BTIF_TRACE_DEBUG4("call channel state callback channel_id=0x%08x mdep_cfg_idx=%d, state=%d fd=%d",p_acb->delete_mdl.channel_id,
+                      p_acb->delete_mdl.mdep_cfg_idx, BTHL_CONN_STATE_DESTROYED, 0);
+    btif_hl_display_bt_bda(&bd_addr);
+
+    BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb,  app_id,
+                       &bd_addr, p_acb->delete_mdl.mdep_cfg_idx,
+                       p_acb->delete_mdl.channel_id, BTHL_CONN_STATE_DESTROYED, 0 );
+}
+/*******************************************************************************
+**
+** Function btif_hl_send_disconnecting_cb
+**
+** Description send a channel disconnecting callback
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_send_disconnecting_cb(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx){
+    btif_hl_mdl_cb_t        *p_dcb = BTIF_HL_GET_MDL_CB_PTR( app_idx,  mcl_idx, mdl_idx);
+    btif_hl_soc_cb_t        *p_scb = p_dcb->p_scb;
+    bt_bdaddr_t             bd_addr;
+    int                     app_id = (int) btif_hl_get_app_id(p_scb->channel_id);
+
+    btif_hl_copy_bda(&bd_addr, p_scb->bd_addr);
+
+    BTIF_TRACE_DEBUG1("%s",__FUNCTION__);
+    BTIF_TRACE_DEBUG4("call channel state callback  channel_id=0x%08x mdep_cfg_idx=%d, state=%d fd=%d",p_scb->channel_id,
+                      p_scb->mdep_cfg_idx, BTHL_CONN_STATE_DISCONNECTING, p_scb->socket_id[0]);
+    btif_hl_display_bt_bda(&bd_addr);
+    BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb,  app_id,
+                       &bd_addr, p_scb->mdep_cfg_idx,
+                       p_scb->channel_id, BTHL_CONN_STATE_DISCONNECTING, p_scb->socket_id[0] );
+}
+/*******************************************************************************
+**
+** Function btif_hl_send_setup_connecting_cb
+**
+** Description send a channel connecting callback
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_send_setup_connecting_cb(UINT8 app_idx, UINT8 mcl_idx){
+    btif_hl_pending_chan_cb_t   *p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+    bt_bdaddr_t                 bd_addr;
+    int                         app_id = (int) btif_hl_get_app_id(p_pcb->channel_id);
+
+    btif_hl_copy_bda(&bd_addr, p_pcb->bd_addr);
+
+    if (p_pcb->in_use && p_pcb->cb_state == BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING)
+    {
+        BTIF_TRACE_DEBUG1("%s",__FUNCTION__);
+        BTIF_TRACE_DEBUG4("call channel state callback  channel_id=0x%08x mdep_cfg_idx=%d state=%d fd=%d",p_pcb->channel_id,
+                          p_pcb->mdep_cfg_idx, BTHL_CONN_STATE_CONNECTING, 0);
+        btif_hl_display_bt_bda(&bd_addr);
+
+        BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb, app_id,
+                           &bd_addr, p_pcb->mdep_cfg_idx,
+                           p_pcb->channel_id, BTHL_CONN_STATE_CONNECTING, 0 );
+        btif_hl_set_chan_cb_state(app_idx, mcl_idx, BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING);
+    }
+}
+/*******************************************************************************
+**
+** Function btif_hl_send_setup_disconnected_cb
+**
+** Description send a channel disconnected callback
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_send_setup_disconnected_cb(UINT8 app_idx, UINT8 mcl_idx){
+    btif_hl_pending_chan_cb_t   *p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+    bt_bdaddr_t                 bd_addr;
+    int                         app_id = (int) btif_hl_get_app_id(p_pcb->channel_id);
+
+    btif_hl_copy_bda(&bd_addr, p_pcb->bd_addr);
+
+    BTIF_TRACE_DEBUG2("%s p_pcb->in_use=%d",__FUNCTION__, p_pcb->in_use);
+    if (p_pcb->in_use)
+    {
+        BTIF_TRACE_DEBUG1("%p_pcb->cb_state=%d",p_pcb->cb_state);
+        if (p_pcb->cb_state == BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING)
+        {
+            BTIF_TRACE_DEBUG4("call channel state callback  channel_id=0x%08x mdep_cfg_idx=%d state=%d fd=%d",p_pcb->channel_id,
+                              p_pcb->mdep_cfg_idx, BTHL_CONN_STATE_CONNECTING, 0);
+            btif_hl_display_bt_bda(&bd_addr);
+            BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb, app_id,
+                               &bd_addr, p_pcb->mdep_cfg_idx,
+                               p_pcb->channel_id, BTHL_CONN_STATE_CONNECTING, 0 );
+
+            BTIF_TRACE_DEBUG4("call channel state callback  channel_id=0x%08x mdep_cfg_idx=%d state=%d fd=%d",p_pcb->channel_id,
+                              p_pcb->mdep_cfg_idx, BTHL_CONN_STATE_DISCONNECTED, 0);
+            btif_hl_display_bt_bda(&bd_addr);
+            BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb, app_id,
+                               &bd_addr, p_pcb->mdep_cfg_idx,
+                               p_pcb->channel_id, BTHL_CONN_STATE_DISCONNECTED, 0 );
+        }
+        else if (p_pcb->cb_state == BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING)
+        {
+            BTIF_TRACE_DEBUG4("call channel state callback  channel_id=0x%08x mdep_cfg_idx=%d state=%d fd=%d",p_pcb->channel_id,
+                              p_pcb->mdep_cfg_idx, BTHL_CONN_STATE_DISCONNECTED, 0);
+            btif_hl_display_bt_bda(&bd_addr);
+            BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb,  app_id,
+                               &bd_addr, p_pcb->mdep_cfg_idx,
+                               p_pcb->channel_id, BTHL_CONN_STATE_DISCONNECTED, 0 );
+        }
+        btif_hl_clean_pcb(p_pcb);
+    }
+}
+/*******************************************************************************
+**
+** Function         btif_hl_proc_sdp_query_cfm
+**
+** Description      Process the SDP query confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_proc_sdp_query_cfm(tBTA_HL *p_data){
+    btif_hl_app_cb_t                *p_acb;
+    btif_hl_mcl_cb_t                *p_mcb;
+    tBTA_HL_SDP                     *p_sdp;
+    tBTA_HL_CCH_OPEN_PARAM          open_param;
+    UINT8                           app_idx, mcl_idx, sdp_idx = 0;
+    UINT8                           num_recs, i, num_mdeps, j;
+    btif_hl_cch_op_t                old_cch_oper;
+    BOOLEAN                         status =FALSE;
+    btif_hl_pending_chan_cb_t     *p_pcb;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    p_sdp = p_data->sdp_query_cfm.p_sdp;
+    num_recs = p_sdp->num_recs;
+
+    BTIF_TRACE_DEBUG1("num of SDP records=%d",num_recs);
+    for (i=0; i<num_recs; i++)
+    {
+        BTIF_TRACE_DEBUG3("rec_idx=%d ctrl_psm=0x%x data_psm=0x%x",
+                          (i+1),p_sdp->sdp_rec[i].ctrl_psm, p_sdp->sdp_rec[i].data_psm);
+        BTIF_TRACE_DEBUG1("MCAP supported procedures=0x%x",p_sdp->sdp_rec[i].mcap_sup_proc);
+        num_mdeps = p_sdp->sdp_rec[i].num_mdeps;
+        BTIF_TRACE_DEBUG1("num of mdeps =%d",num_mdeps);
+        for (j=0; j< num_mdeps; j++)
+        {
+            BTIF_TRACE_DEBUG4("mdep_idx=%d mdep_id=0x%x data_type=0x%x mdep_role=0x%x",
+                              (j+1),
+                              p_sdp->sdp_rec[i].mdep_cfg[j].mdep_id,
+                              p_sdp->sdp_rec[i].mdep_cfg[j].data_type,
+                              p_sdp->sdp_rec[i].mdep_cfg[j].mdep_role );
+        }
+    }
+
+    if (btif_hl_find_app_idx_using_handle(p_data->sdp_query_cfm.app_handle, &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+        if (btif_hl_find_mcl_idx(app_idx, p_data->sdp_query_cfm.bd_addr, &mcl_idx))
+        {
+            p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            if (p_mcb->cch_oper != BTIF_HL_CCH_OP_NONE)
+            {
+                memcpy(&p_mcb->sdp, p_sdp, sizeof(tBTA_HL_SDP));
+                old_cch_oper = p_mcb->cch_oper;
+                p_mcb->cch_oper = BTIF_HL_CCH_OP_NONE;
+
+                switch (old_cch_oper)
+                {
+                    case BTIF_HL_CCH_OP_MDEP_FILTERING:
+                        status = btif_hl_find_sdp_idx_using_mdep_filter(app_idx, mcl_idx, &sdp_idx);
+                        break;
+                    default:
+                        break;
+                }
+
+                if (status)
+                {
+                    p_mcb->sdp_idx       = sdp_idx;
+                    p_mcb->valid_sdp_idx = TRUE;
+                    p_mcb->ctrl_psm      = p_mcb->sdp.sdp_rec[sdp_idx].ctrl_psm;
+
+                    switch (old_cch_oper)
+                    {
+                        case BTIF_HL_CCH_OP_MDEP_FILTERING:
+                            p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+                            if (p_pcb->in_use)
+                            {
+                                if (!p_pcb->abort_pending)
+                                {
+                                    switch (p_pcb->op)
+                                    {
+                                        case BTIF_HL_PEND_DCH_OP_OPEN:
+                                            btif_hl_send_setup_connecting_cb(app_idx, mcl_idx);
+                                            break;
+                                        case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                                        default:
+                                            break;
+                                    }
+                                    open_param.ctrl_psm = p_mcb->ctrl_psm;
+                                    bdcpy(open_param.bd_addr, p_mcb->bd_addr);
+                                    open_param.sec_mask = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+                                    BTA_HlCchOpen(p_acb->app_handle, &open_param);
+                                }
+                                else
+                                {
+                                    BTIF_TRACE_DEBUG0("channel abort pending");
+                                }
+                            }
+                            break;
+
+                        case BTIF_HL_CCH_OP_DCH_OPEN:
+                            status = btif_hl_proc_pending_op(app_idx,mcl_idx);
+                            break;
+
+                        default:
+                            BTIF_TRACE_ERROR1("Invalid CCH oper %d", old_cch_oper);
+                            break;
+                    }
+
+
+                }
+                else
+                {
+                    BTIF_TRACE_ERROR0("Can not find SDP idx discard CCH Open request");
+                }
+            }
+        }
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cch_open_ind
+**
+** Description      Process the CCH open indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_cch_open_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_mcl_cb_t         *p_mcb;
+    UINT8                   app_idx, mcl_idx;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (btif_hl_find_app_idx_using_handle(p_data->cch_open_ind.app_handle, &app_idx))
+    {
+        if (!btif_hl_find_mcl_idx(app_idx, p_data->cch_open_ind.bd_addr, &mcl_idx))
+        {
+            if (btif_hl_find_avail_mcl_idx(app_idx, &mcl_idx))
+            {
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                memset(p_mcb, 0, sizeof(btif_hl_mcl_cb_t));
+                p_mcb->in_use = TRUE;
+                p_mcb->is_connected = TRUE;
+                p_mcb->mcl_handle = p_data->cch_open_ind.mcl_handle;
+                bdcpy(p_mcb->bd_addr, p_data->cch_open_ind.bd_addr);
+                btif_hl_start_cch_timer(app_idx, mcl_idx);
+            }
+        }
+        else
+        {
+            BTIF_TRACE_ERROR0("The MCL already exist for cch_open_ind");
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_pending_op
+**
+** Description      Process the pending dch operation.
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+BOOLEAN btif_hl_proc_pending_op(UINT8 app_idx, UINT8 mcl_idx)
+
+{
+
+    btif_hl_app_cb_t            *p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_mcl_cb_t            *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    btif_hl_pending_chan_cb_t   *p_pcb;
+    BOOLEAN                     status = FALSE;
+    tBTA_HL_DCH_OPEN_PARAM      dch_open;
+    tBTA_HL_MDL_ID              mdl_id;
+    tBTA_HL_DCH_RECONNECT_PARAM reconnect_param;
+
+    p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+    if (p_pcb->in_use)
+    {
+        switch (p_pcb->op)
+        {
+            case BTIF_HL_PEND_DCH_OP_OPEN:
+                if (!p_pcb->abort_pending)
+                {
+                    BTIF_TRACE_DEBUG0("op BTIF_HL_PEND_DCH_OP_OPEN");
+                    dch_open.ctrl_psm = p_mcb->ctrl_psm;
+                    dch_open.local_mdep_id = p_acb->sup_feature.mdep[p_pcb->mdep_cfg_idx].mdep_id;
+                    if (btif_hl_find_peer_mdep_id(p_acb->app_id, p_mcb->bd_addr,
+                                                  p_acb->sup_feature.mdep[p_pcb->mdep_cfg_idx].mdep_cfg.mdep_role,
+                                                  p_acb->sup_feature.mdep[p_pcb->mdep_cfg_idx].mdep_cfg.data_cfg[0].data_type, &dch_open.peer_mdep_id ))
+                    {
+                        dch_open.local_cfg = p_acb->channel_type[p_pcb->mdep_cfg_idx];
+                        if ((p_acb->sup_feature.mdep[p_pcb->mdep_cfg_idx].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+                            && !btif_hl_is_the_first_reliable_existed(app_idx, mcl_idx))
+                        {
+                            dch_open.local_cfg = BTA_HL_DCH_CFG_RELIABLE;
+                        }
+                        dch_open.sec_mask = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+                        BTIF_TRACE_DEBUG1("dch_open.local_cfg=%d  ", dch_open.local_cfg);
+                        btif_hl_send_setup_connecting_cb(app_idx,mcl_idx);
+
+                        if (!btif_hl_is_reconnect_possible(app_idx, mcl_idx, p_pcb->mdep_cfg_idx, &dch_open, &mdl_id ))
+                        {
+                            BTIF_TRACE_DEBUG0("Issue DCH open" );
+                            BTA_HlDchOpen(p_mcb->mcl_handle, &dch_open);
+                        }
+                        else
+                        {
+                            reconnect_param.ctrl_psm = p_mcb->ctrl_psm;
+                            reconnect_param.mdl_id = mdl_id;;
+                            BTIF_TRACE_DEBUG2("Issue Reconnect ctrl_psm=0x%x mdl_id=0x%x",reconnect_param.ctrl_psm, reconnect_param.mdl_id);
+                            BTA_HlDchReconnect(p_mcb->mcl_handle, &reconnect_param);
+                        }
+                        status = TRUE;
+                    }
+                }
+                else
+                {
+                    btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+                    status = TRUE;
+                }
+                break;
+            case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                BTA_HlDeleteMdl(p_mcb->mcl_handle, p_acb->delete_mdl.mdl_id);
+                status = TRUE;
+                break;
+
+            default:
+                break;
+        }
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cch_open_cfm
+**
+** Description      Process the CCH open confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_proc_cch_open_cfm(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t         *p_acb;
+    btif_hl_mcl_cb_t         *p_mcb;
+    UINT8                    app_idx, mcl_idx;
+    BOOLEAN                  status = FALSE;
+    tBTA_HL_DCH_OPEN_PARAM   dch_open;
+
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_app_idx_using_handle(p_data->cch_open_cfm.app_handle, &app_idx))
+    {
+        BTIF_TRACE_DEBUG1("app_idx=%d", app_idx);
+        if (btif_hl_find_mcl_idx(app_idx, p_data->cch_open_cfm.bd_addr, &mcl_idx))
+        {
+            p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+            p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            BTIF_TRACE_DEBUG1("mcl_idx=%d", mcl_idx);
+            p_mcb->mcl_handle = p_data->cch_open_cfm.mcl_handle;
+            p_mcb->is_connected = TRUE;
+            status = btif_hl_proc_pending_op(app_idx, mcl_idx);
+            if (status)
+                btif_hl_start_cch_timer(app_idx, mcl_idx);
+        }
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cch_close_ind
+**
+** Description      Process the CCH close indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_cch_close_ind(tBTA_HL *p_data)
+
+{
+    UINT8                   app_idx, mcl_idx;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->cch_close_ind.mcl_handle, &app_idx, &mcl_idx))
+    {
+        btif_hl_stop_cch_timer(app_idx, mcl_idx);
+        btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+        btif_hl_release_mcl_sockets(app_idx, mcl_idx);
+        btif_hl_clean_mcl_cb(app_idx, mcl_idx);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cch_close_cfm
+**
+** Description      Process the CCH close confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_cch_close_cfm(tBTA_HL *p_data)
+{
+    UINT8                   app_idx, mcl_idx;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->cch_close_cfm.mcl_handle, &app_idx, &mcl_idx))
+    {
+        btif_hl_stop_cch_timer(app_idx, mcl_idx);
+        btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+        btif_hl_release_mcl_sockets(app_idx, mcl_idx);
+        btif_hl_clean_mcl_cb(app_idx, mcl_idx);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_create_ind
+**
+** Description      Process the MDL create indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_create_ind(tBTA_HL *p_data){
+    btif_hl_app_cb_t         *p_acb;
+    btif_hl_mcl_cb_t         *p_mcb;
+    tBTA_HL_MDEP            *p_mdep;
+    UINT8                   app_idx, mcl_idx, mdep_cfg_idx;
+    BOOLEAN                 first_reliable_exist;
+    BOOLEAN                 success = TRUE;
+    tBTA_HL_DCH_CFG         rsp_cfg = BTA_HL_DCH_CFG_UNKNOWN;
+    tBTA_HL_DCH_CREATE_RSP  rsp_code = BTA_HL_DCH_CREATE_RSP_CFG_REJ;
+    tBTA_HL_DCH_CREATE_RSP_PARAM create_rsp_param;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->dch_create_ind.mcl_handle, &app_idx, &mcl_idx))
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb =BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+        if (btif_hl_find_mdep_cfg_idx(app_idx, p_data->dch_create_ind.local_mdep_id, &mdep_cfg_idx))
+        {
+            p_mdep = &(p_acb->sup_feature.mdep[mdep_cfg_idx]);
+            first_reliable_exist = btif_hl_is_the_first_reliable_existed(app_idx, mcl_idx);
+            switch (p_mdep->mdep_cfg.mdep_role)
+            {
+                case BTA_HL_MDEP_ROLE_SOURCE:
+                    if (p_data->dch_create_ind.cfg == BTA_HL_DCH_CFG_NO_PREF)
+                    {
+                        if (first_reliable_exist)
+                        {
+                            rsp_cfg = p_acb->channel_type[mdep_cfg_idx];
+                        }
+                        else
+                        {
+                            rsp_cfg = BTA_HL_DCH_CFG_RELIABLE;
+                        }
+                        rsp_code = BTA_HL_DCH_CREATE_RSP_SUCCESS;
+                    }
+
+                    break;
+                case BTA_HL_MDEP_ROLE_SINK:
+
+                    if ((p_data->dch_create_ind.cfg  == BTA_HL_DCH_CFG_RELIABLE) ||
+                        (first_reliable_exist && (p_data->dch_create_ind.cfg  == BTA_HL_DCH_CFG_STREAMING)))
+                    {
+                        rsp_code = BTA_HL_DCH_CREATE_RSP_SUCCESS;
+                        rsp_cfg = p_data->dch_create_ind.cfg;
+                    }
+                    break;
+                default:
+                    break;
+            }
+        }
+    }
+    else
+    {
+        success = FALSE;
+    }
+
+    if (success)
+    {
+        BTIF_TRACE_DEBUG2("create response rsp_code=%d rsp_cfg=%d", rsp_code, rsp_cfg );
+        create_rsp_param.local_mdep_id = p_data->dch_create_ind.local_mdep_id;
+        create_rsp_param.mdl_id = p_data->dch_create_ind.mdl_id;
+        create_rsp_param.rsp_code = rsp_code;
+        create_rsp_param.cfg_rsp = rsp_cfg;
+        BTA_HlDchCreateRsp(p_mcb->mcl_handle, &create_rsp_param);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_open_ind
+**
+** Description      Process the DCH open indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dch_open_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t         *p_acb;
+    btif_hl_mcl_cb_t         *p_mcb;
+    btif_hl_mdl_cb_t         *p_dcb;
+    UINT8                    app_idx, mcl_idx, mdl_idx, mdep_cfg_idx;
+    UINT8                    dc_cfg;
+    BOOLEAN close_dch = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->dch_open_ind.mcl_handle, &app_idx, &mcl_idx ))
+    {
+        p_acb =BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb =BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+        if (btif_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+        {
+            p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+            if (btif_hl_find_mdep_cfg_idx(app_idx, p_data->dch_open_ind.local_mdep_id, &mdep_cfg_idx))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->mdl_handle           =  p_data->dch_open_ind.mdl_handle;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_mdep_id        = p_data->dch_open_ind.local_mdep_id;
+                p_dcb->mdl_id               = p_data->dch_open_ind.mdl_id;
+                p_dcb->dch_mode             = p_data->dch_open_ind.dch_mode;
+                p_dcb->dch_mode             = p_data->dch_open_ind.dch_mode;
+                p_dcb->is_the_first_reliable = p_data->dch_open_ind.first_reliable;
+                p_dcb->mtu                  = p_data->dch_open_ind.mtu;
+
+                if(btif_hl_find_channel_id_using_mdl_id(app_idx,p_dcb->mdl_id , &p_dcb->channel_id))
+                {
+                    BTIF_TRACE_DEBUG4(" app_idx=%d mcl_idx=%d mdl_idx=%d channel_id=%d",
+                                        app_idx, mcl_idx, mdl_idx, p_dcb->channel_id  );
+                    if (!btif_hl_create_socket(app_idx, mcl_idx, mdl_idx))
+                    {
+                        BTIF_TRACE_ERROR0("Unable to create socket");
+                        close_dch = TRUE;
+                    }
+                }
+                else
+                {
+                    BTIF_TRACE_ERROR1("Unable find channel id for mdl_id=0x%x", p_dcb->mdl_id  );
+                    close_dch = TRUE;
+                }
+            }
+            else
+            {
+                BTIF_TRACE_ERROR1("INVALID_LOCAL_MDEP_ID mdep_id=%d",p_data->dch_open_cfm.local_mdep_id);
+                close_dch = TRUE;
+            }
+
+            if (close_dch)
+                btif_hl_clean_mdl_cb(p_dcb);
+        }
+        else
+            close_dch = TRUE;
+    }
+    else
+        close_dch = TRUE;
+
+    if (close_dch)
+        BTA_HlDchClose(p_data->dch_open_cfm.mdl_handle);
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_open_cfm
+**
+** Description      Process the DCH close confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_proc_dch_open_cfm(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t            *p_acb;
+    btif_hl_mcl_cb_t            *p_mcb;
+    btif_hl_mdl_cb_t            *p_dcb;
+    btif_hl_pending_chan_cb_t   *p_pcb;
+    UINT8                    app_idx, mcl_idx, mdl_idx, mdep_cfg_idx;
+    BOOLEAN                  status = FALSE;
+    BOOLEAN                  close_dch = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->dch_open_cfm.mcl_handle, &app_idx, &mcl_idx ))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+
+        if (btif_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+        {
+            p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+            if (btif_hl_find_mdep_cfg_idx(app_idx, p_data->dch_open_cfm.local_mdep_id, &mdep_cfg_idx))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->mdl_handle           = p_data->dch_open_cfm.mdl_handle;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_mdep_id        = p_data->dch_open_cfm.local_mdep_id;
+                p_dcb->mdl_id               = p_data->dch_open_cfm.mdl_id;
+                p_dcb->dch_mode             = p_data->dch_open_cfm.dch_mode;
+                p_dcb->is_the_first_reliable= p_data->dch_open_cfm.first_reliable;
+                p_dcb->mtu                  = p_data->dch_open_cfm.mtu;
+                p_dcb->channel_id           = p_pcb->channel_id;
+
+                BTIF_TRACE_DEBUG3("app_idx=%d mcl_idx=%d mdl_idx=%d",  app_idx, mcl_idx, mdl_idx  );
+                btif_hl_send_setup_connecting_cb(app_idx, mcl_idx);
+                if (btif_hl_create_socket(app_idx, mcl_idx, mdl_idx))
+                {
+                    status = TRUE;
+                    BTIF_TRACE_DEBUG4("app_idx=%d mcl_idx=%d mdl_idx=%d p_dcb->channel_id=0x%08x",
+                                      app_idx, mcl_idx, mdl_idx, p_dcb->channel_id);
+                    btif_hl_clean_pcb(p_pcb);
+                }
+                else
+                {
+                    BTIF_TRACE_ERROR0("Unable to create socket");
+                    close_dch = TRUE;
+                }
+            }
+            else
+            {
+                BTIF_TRACE_ERROR1("INVALID_LOCAL_MDEP_ID mdep_id=%d",p_data->dch_open_cfm.local_mdep_id);
+                close_dch = TRUE;
+            }
+
+            if (close_dch)
+            {
+                btif_hl_clean_mdl_cb(p_dcb);
+                BTA_HlDchClose(p_data->dch_open_cfm.mdl_handle);
+            }
+        }
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_reconnect_cfm
+**
+** Description      Process the DCH reconnect indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_proc_dch_reconnect_cfm(tBTA_HL *p_data)
+{
+    btif_hl_app_cb_t            *p_acb;
+    btif_hl_mcl_cb_t            *p_mcb;
+    btif_hl_mdl_cb_t            *p_dcb;
+    btif_hl_pending_chan_cb_t   *p_pcb;
+    UINT8                    app_idx, mcl_idx, mdl_idx, mdep_cfg_idx;
+    BOOLEAN                  status = FALSE;
+    BOOLEAN                  close_dch = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->dch_open_cfm.mcl_handle, &app_idx, &mcl_idx ))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+        p_pcb = BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx);
+
+        if (btif_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+        {
+            p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+            if (btif_hl_find_mdep_cfg_idx(app_idx, p_data->dch_reconnect_cfm.local_mdep_id, &mdep_cfg_idx))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->mdl_handle           = p_data->dch_reconnect_cfm.mdl_handle;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_mdep_id        = p_data->dch_reconnect_cfm.local_mdep_id;
+                p_dcb->mdl_id               = p_data->dch_reconnect_cfm.mdl_id;
+                p_dcb->dch_mode             = p_data->dch_reconnect_cfm.dch_mode;
+                p_dcb->is_the_first_reliable= p_data->dch_reconnect_cfm.first_reliable;
+                p_dcb->mtu                  = p_data->dch_reconnect_cfm.mtu;
+                p_dcb->channel_id           = p_pcb->channel_id;
+
+                BTIF_TRACE_DEBUG3("app_idx=%d mcl_idx=%d mdl_idx=%d",  app_idx, mcl_idx, mdl_idx  );
+                btif_hl_send_setup_connecting_cb(app_idx, mcl_idx);
+                if (btif_hl_create_socket(app_idx, mcl_idx, mdl_idx))
+                {
+                    status = TRUE;
+                    BTIF_TRACE_DEBUG4("app_idx=%d mcl_idx=%d mdl_idx=%d p_dcb->channel_id=0x%08x",
+                                      app_idx, mcl_idx, mdl_idx, p_dcb->channel_id);
+                    btif_hl_clean_pcb(p_pcb);
+                }
+                else
+                {
+                    BTIF_TRACE_ERROR0("Unable to create socket");
+                    close_dch = TRUE;
+                }
+            }
+            else
+            {
+                BTIF_TRACE_ERROR1("INVALID_LOCAL_MDEP_ID mdep_id=%d",p_data->dch_open_cfm.local_mdep_id);
+                close_dch = TRUE;
+            }
+
+            if (close_dch)
+            {
+                btif_hl_clean_mdl_cb(p_dcb);
+                BTA_HlDchClose(p_data->dch_reconnect_cfm.mdl_handle);
+            }
+        }
+    }
+
+    return status;
+
+}
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_reconnect_ind
+**
+** Description      Process the DCH reconnect indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dch_reconnect_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_app_cb_t        *p_acb;
+    btif_hl_mcl_cb_t        *p_mcb;
+    btif_hl_mdl_cb_t        *p_dcb;
+    UINT8                   app_idx, mcl_idx, mdl_idx, mdep_cfg_idx, dc_cfg;
+    BOOLEAN                 close_dch = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+
+    if (btif_hl_find_mcl_idx_using_handle(p_data->dch_reconnect_ind.mcl_handle, &app_idx, &mcl_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+
+        if (btif_hl_find_avail_mdl_idx(app_idx, mcl_idx, &mdl_idx))
+        {
+            p_dcb =BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+            if (btif_hl_find_mdep_cfg_idx(app_idx, p_data->dch_reconnect_ind.local_mdep_id, &mdep_cfg_idx))
+            {
+                p_dcb->in_use               = TRUE;
+                p_dcb->mdl_handle           = p_data->dch_reconnect_ind.mdl_handle;
+                p_dcb->local_mdep_cfg_idx   = mdep_cfg_idx;
+                p_dcb->local_mdep_id        = p_data->dch_reconnect_ind.local_mdep_id;
+                p_dcb->mdl_id               = p_data->dch_reconnect_ind.mdl_id;
+                p_dcb->dch_mode             = p_data->dch_reconnect_ind.dch_mode;
+                p_dcb->dch_mode             = p_data->dch_reconnect_ind.dch_mode;
+                p_dcb->is_the_first_reliable= p_data->dch_reconnect_ind.first_reliable;
+                p_dcb->mtu                  = p_data->dch_reconnect_ind.mtu;
+                p_dcb->channel_id           = btif_hl_get_next_channel_id(p_acb->app_id);
+
+                BTIF_TRACE_DEBUG4(" app_idx=%d mcl_idx=%d mdl_idx=%d channel_id=%d",
+                                  app_idx, mcl_idx, mdl_idx, p_dcb->channel_id  );
+                if (!btif_hl_create_socket(app_idx, mcl_idx, mdl_idx))
+                {
+                    BTIF_TRACE_ERROR0("Unable to create socket");
+                    close_dch = TRUE;
+                }
+            }
+            else
+            {
+                BTIF_TRACE_ERROR1("INVALID_LOCAL_MDEP_ID mdep_id=%d",p_data->dch_open_cfm.local_mdep_id);
+                close_dch = TRUE;
+            }
+
+            if (close_dch)
+                btif_hl_clean_mdl_cb(p_dcb);
+        }
+        else
+            close_dch = TRUE;
+    }
+    else
+        close_dch = TRUE;
+
+    if (close_dch)
+        BTA_HlDchClose(p_data->dch_reconnect_ind.mdl_handle);
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_close_ind
+**
+** Description      Process the DCH close indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dch_close_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_mdl_cb_t         *p_dcb;
+    UINT8                   app_idx, mcl_idx, mdl_idx;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (btif_hl_find_mdl_idx_using_handle(p_data->dch_close_ind.mdl_handle,
+                                          &app_idx, &mcl_idx, &mdl_idx ))
+    {
+        p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+        btif_hl_release_socket(app_idx,mcl_idx, mdl_idx);
+        btif_hl_clean_mdl_cb(p_dcb);
+        if (!btif_hl_num_dchs_in_use(app_idx, mcl_idx))
+            btif_hl_start_cch_timer(app_idx, mcl_idx);
+        BTIF_TRACE_DEBUG1("remote DCH close success mdl_idx=%d", mdl_idx);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_close_cfm
+**
+** Description      Process the DCH reconnect confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dch_close_cfm(tBTA_HL *p_data)
+
+{
+    btif_hl_mdl_cb_t         *p_dcb;
+    UINT8                   app_idx, mcl_idx, mdl_idx;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (btif_hl_find_mdl_idx_using_handle(p_data->dch_close_cfm.mdl_handle,
+                                          &app_idx, &mcl_idx, &mdl_idx ))
+    {
+        p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+        btif_hl_release_socket(app_idx,mcl_idx,mdl_idx);
+        btif_hl_clean_mdl_cb(p_dcb);
+        if (!btif_hl_num_dchs_in_use(app_idx, mcl_idx))
+            btif_hl_start_cch_timer(app_idx, mcl_idx);
+        BTIF_TRACE_DEBUG1("BTAPP local DCH close success mdl_idx=%d", mdl_idx);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_abort_ind
+**
+** Description      Process the abort indicaiton
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_abort_ind(tBTA_HL_MCL_HANDLE mcl_handle){
+
+    UINT8                   app_idx,mcl_idx;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__ );
+    if (btif_hl_find_mcl_idx_using_handle(mcl_handle, &app_idx, &mcl_idx))
+    {
+        btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_abort_cfm
+**
+** Description      Process the abort confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_abort_cfm(tBTA_HL_MCL_HANDLE mcl_handle){
+    UINT8                   app_idx,mcl_idx;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__ );
+    if (btif_hl_find_mcl_idx_using_handle(mcl_handle, &app_idx, &mcl_idx))
+    {
+        btif_hl_send_setup_disconnected_cb(app_idx,mcl_idx);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_send_data_cfm
+**
+** Description      Process the send data confirmation
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_send_data_cfm(tBTA_HL_MDL_HANDLE mdl_handle,
+                                       tBTA_HL_STATUS status){
+    UINT8                   app_idx,mcl_idx, mdl_idx;
+    btif_hl_mdl_cb_t         *p_dcb;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (btif_hl_find_mdl_idx_using_handle(mdl_handle,
+                                          &app_idx, &mcl_idx, &mdl_idx ))
+    {
+        p_dcb =BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+        btif_hl_free_buf((void **) &p_dcb->p_tx_pkt);
+        BTIF_TRACE_DEBUG1("send success free p_tx_pkt tx_size=%d", p_dcb->tx_size);
+        p_dcb->tx_size = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_dch_cong_ind
+**
+** Description      Process the DCH congestion change indication
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+static void btif_hl_proc_dch_cong_ind(tBTA_HL *p_data)
+
+{
+    btif_hl_mdl_cb_t         *p_dcb;
+    UINT8                   app_idx, mcl_idx, mdl_idx;
+
+    BTIF_TRACE_DEBUG0("btif_hl_proc_dch_cong_ind");
+
+
+    if (btif_hl_find_mdl_idx_using_handle(p_data->dch_cong_ind.mdl_handle, &app_idx, &mcl_idx, &mdl_idx))
+    {
+        p_dcb =BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+        p_dcb->cong = p_data->dch_cong_ind.cong;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_app_data
+**
+** Description      Process registration request
+**
+** Returns          void
+**
+*******************************************************************************/
+static BOOLEAN btif_hl_proc_app_data(UINT8 app_idx){
+    btif_hl_app_cb_t *p_acb  = BTIF_HL_GET_APP_CB_PTR(app_idx);
+    btif_hl_app_data_t *p_data;
+    btif_hl_nv_app_data_t *p_nv;
+    BOOLEAN is_match;
+    UINT8 num_mdeps, i;
+    tBTA_HL_MDEP_CFG *p_cfg;
+    tBTA_HL_MDEP_CFG *p_nv_cfg;
+    BOOLEAN status = TRUE;
+    bt_status_t bt_status;
+
+    BTIF_TRACE_DEBUG2("%s app_idx=%d  ", __FUNCTION__, app_idx  );
+
+    if (!GKI_queue_is_empty(&p_ncb->app_queue))
+    {
+        p_data = (btif_hl_app_data_t *)GKI_getfirst((void *)&p_ncb->app_queue);
+        while (p_data != NULL)
+        {
+            is_match = FALSE;
+            p_nv = &p_data->app_data;
+            BTIF_TRACE_DEBUG1("compare with nv idx=%d", p_data->app_nv_idx);
+            if (p_nv->application_name != NULL &&
+                memcmp((void *)p_acb->application_name, p_nv->application_name,(BTIF_HL_APPLICATION_NAME_LEN +1)) != 0 )
+            {
+                BTIF_TRACE_DEBUG1("application_name mismatch NV(%s)",p_nv->application_name);
+            }
+            else if (p_nv->provider_name != NULL &&
+                     memcmp((void *)p_acb->provider_name, p_nv->provider_name,(BTA_PROVIDER_NAME_LEN +1)) != 0)
+            {
+                BTIF_TRACE_DEBUG1("provider_name mismatch NV(%s)",p_nv->provider_name);
+            }
+            else if (p_nv->srv_name != NULL &&
+                     memcmp((void *)p_acb->srv_name, p_nv->srv_name,(BTA_SERVICE_NAME_LEN +1)) != 0)
+            {
+                BTIF_TRACE_DEBUG1("srv_name mismatch NV(%s)",p_nv->srv_name);
+            }
+            else if (p_nv->srv_desp != NULL &&
+                     memcmp((void *)p_acb->srv_desp, p_nv->srv_desp,(BTA_SERVICE_DESP_LEN +1)) != 0)
+            {
+                BTIF_TRACE_DEBUG1("srv_desp mismatch NV(%s)",p_nv->srv_desp);
+            }
+            else if (p_acb->sup_feature.app_role_mask != p_nv->sup_feature.app_role_mask)
+            {
+                BTIF_TRACE_DEBUG1("app_role_mask mismatch app_role_mask=0x%x", p_nv->sup_feature.app_role_mask);
+            }
+            else if (p_acb->sup_feature.advertize_source_sdp != p_nv->sup_feature.advertize_source_sdp)
+            {
+                BTIF_TRACE_DEBUG1("advertize_source_sdp mismatch advertize_source_sdp=0x%x",
+                                  p_nv->sup_feature.advertize_source_sdp);
+            }
+            else if (p_acb->sup_feature.num_of_mdeps != p_nv->sup_feature.num_of_mdeps)
+            {
+                BTIF_TRACE_DEBUG1("num_of_mdeps mismatch num_of_mdeps=0x%x", p_nv->sup_feature.num_of_mdeps);
+            }
+            else
+            {
+                 //TODO remove debug after testing completed
+                BTIF_TRACE_DEBUG1("Step1 match for app_idx=%d now check mdep cfg", app_idx);
+                is_match = TRUE;
+                num_mdeps = p_acb->sup_feature.num_of_mdeps;
+                BTIF_TRACE_DEBUG1("num of medeps num_mdeps=%d  ", num_mdeps);
+                for (i=0; i< num_mdeps; i++)
+                {
+                    p_cfg = &p_acb->sup_feature.mdep[i].mdep_cfg;
+                    p_nv_cfg = &p_nv->sup_feature.mdep[i].mdep_cfg;
+
+                    BTIF_TRACE_DEBUG2("mdep-role=%d data_type=%d ",
+                                      p_cfg->mdep_role,p_cfg->data_cfg[0].data_type );
+                    BTIF_TRACE_DEBUG2("from NV mdep-role=%d data_type=%d ",
+                                      p_nv_cfg->mdep_role,p_nv_cfg->data_cfg[0].data_type );
+                    if (p_cfg->mdep_role != p_nv_cfg->mdep_role ||
+                        p_cfg->data_cfg[0].data_type !=  p_nv_cfg->data_cfg[0].data_type )
+                    {
+                        is_match = FALSE;
+                        BTIF_TRACE_DEBUG0("Not Match" );
+                        break;
+                    }
+                }
+            }
+
+            if (!is_match)
+            {
+                p_data = (btif_hl_app_data_t *)GKI_getnext((void *)p_data);
+            }
+            else
+            {
+                BTIF_TRACE_DEBUG1("Match is found app_nv_idx=%d",p_data->app_nv_idx );
+                break;
+            }
+        }
+    }
+
+    if (is_match)
+    {
+        if ((bt_status = btif_storage_read_hl_mdl_data(p_data->app_nv_idx,
+            (char *) &p_acb->mdl_cfg[0], sizeof(btif_hl_nv_mdl_data_t)))
+            == BT_STATUS_SUCCESS)
+        {
+            p_data->app_idx = app_idx;
+            p_acb->is_new_app = FALSE;
+            p_acb->app_nv_idx = p_data->app_nv_idx;
+            BTIF_TRACE_DEBUG2("btif_storage_read_hl_mdl_data OK  app_idx=%d app_nv_idx=%d",
+                              app_idx, p_data->app_nv_idx );
+
+            for (i=0; i<BTA_HL_NUM_MDL_CFGS; i++)
+            {
+                //TODO remove debug after testing completed
+                if (p_acb->mdl_cfg[i].base.active)
+                {
+                    BTIF_TRACE_DEBUG5("i=%d mdl_id=0x%x dch_mode=%d local_mdep_id=%d peer_mdep_id=%d",
+                                      i,
+                                      p_acb->mdl_cfg[i].base.mdl_id,
+                                      p_acb->mdl_cfg[i].base.dch_mode,
+                                      p_acb->mdl_cfg[i].base.local_mdep_id,
+                                      p_acb->mdl_cfg[i].extra.peer_mdep_id );
+
+                }
+
+            }
+        }
+        else
+        {
+            status= FALSE;
+        }
+    }
+    else
+    {
+        memset(&p_acb->mdl_cfg, 0, sizeof(btif_hl_nv_mdl_data_t));
+        p_acb->is_new_app = TRUE;
+        BTIF_TRACE_DEBUG0("No Match this is a new app set is_new_app=TRUE");
+    }
+
+    BTIF_TRACE_DEBUG1("status=%d  ",status  );
+    return status;
+
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cb_evt
+**
+** Description      Process registration request
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_proc_reg_request(UINT8 app_idx, UINT8  app_id,
+                                     tBTA_HL_REG_PARAM *p_reg_param,
+                                     tBTA_HL_CBACK *p_cback){
+    bt_status_t status= BT_STATUS_SUCCESS;
+    UINT8 i;
+    btif_hl_app_data_t *p_data;
+    btif_hl_nv_app_cb_t *p_app_cb;
+    BTIF_TRACE_DEBUG4("%s app_idx=%d app_id=%d is_app_read=%d", __FUNCTION__, app_idx, app_id,p_ncb->is_app_read );
+
+    if (!p_ncb->is_app_read)
+    {
+        if ((status = btif_storage_read_hl_apps_cb((char *)&p_ncb->app_cb, sizeof(btif_hl_nv_app_cb_t))) == BT_STATUS_SUCCESS)
+        {
+            p_app_cb = &p_ncb->app_cb;
+            for (i=0; i< BTIF_HL_NV_MAX_APPS; i++)
+            {
+                if (p_app_cb->app[i].in_use )
+                {
+                    BTIF_TRACE_DEBUG1("app_nv_idx=%d in_use=TRUE",i);
+                    if (  (p_data = (btif_hl_app_data_t *)GKI_getbuf((UINT16)sizeof(btif_hl_app_data_t)))!=NULL)
+                    {
+                        BTIF_TRACE_DEBUG1("load app_nv_idx=%d ", i );
+                        p_data->active = FALSE;
+                        p_data->app_idx = 0;
+                        p_data->app_nv_idx = i;
+                        if ((status = btif_storage_read_hl_app_data(i, (char *)&p_data->app_data, sizeof(btif_hl_nv_app_data_t)))
+                            == BT_STATUS_SUCCESS)
+                        {
+                            BTIF_TRACE_DEBUG0("enuque app_data");
+                            GKI_enqueue(&p_ncb->app_queue, (void *) p_data);
+                        }
+                        else
+                        {
+                            BTIF_TRACE_DEBUG0("btif_storage_read_hl_app_data failed");
+                            status = BT_STATUS_FAIL;
+                            btif_hl_free_buf((void **)&p_data);
+                            break;
+                        }
+                    }
+                    else
+                    {
+                        BTIF_TRACE_DEBUG0("GKI_getbuf failed");
+                        status = BT_STATUS_FAIL;
+                        btif_hl_free_buf((void **)&p_data);
+                        break;
+                    }
+                }
+            }
+
+            BTIF_TRACE_DEBUG1("app data load status=%d (0-BT_STATUS_SUCCESS) ", status );
+            if ( status == BT_STATUS_SUCCESS)
+            {
+                p_ncb->is_app_read = TRUE;
+            }
+            else
+            {
+                BTIF_TRACE_DEBUG0("status=failed remove all elements in app_queue");
+                if (!GKI_queue_is_empty(&p_ncb->app_queue))
+                {
+                    p_data = (btif_hl_app_data_t *)GKI_getfirst((void *)&p_ncb->app_queue);
+                    while (p_data != NULL)
+                    {
+                        GKI_remove_from_queue((void *)&p_ncb->app_queue, p_data);
+                        p_data = (btif_hl_app_data_t *)GKI_getfirst((void *)&p_ncb->app_queue);
+                    }
+                }
+            }
+        }
+        else
+        {
+            BTIF_TRACE_DEBUG0("btif_storage_read_hl_apps_cb failed");
+        }
+    }
+
+    if (status == BT_STATUS_SUCCESS)
+    {
+        if (!btif_hl_proc_app_data(app_idx))
+        {
+            btif_hl_free_app_idx(app_idx);
+            BTIF_TRACE_DEBUG2("call reg state callback app_id=%d state=%d", app_id, BTHL_APP_REG_STATE_REG_FAILED);
+            BTIF_HL_CALL_CBACK(bt_hl_callbacks, app_reg_state_cb, (int) app_id,
+                               BTHL_APP_REG_STATE_REG_FAILED );
+        }
+        else
+        {
+            BTA_HlRegister(app_id, p_reg_param, btif_hl_cback);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_proc_cb_evt
+**
+** Description      Process HL callback events
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_proc_cb_evt(UINT16 event, char* p_param){
+
+    btif_hl_evt_cb_t                *p_data = (btif_hl_evt_cb_t *)p_param;
+    bt_bdaddr_t                     bd_addr;
+    bthl_channel_state_t            state=BTHL_CONN_STATE_DISCONNECTED;
+    BOOLEAN                         send_chan_cb=TRUE;
+    tBTA_HL_REG_PARAM               reg_param;
+    btif_hl_app_cb_t                *p_acb;
+    bthl_app_reg_state_t            reg_state = BTHL_APP_REG_STATE_REG_FAILED;
+    int                             app_id;
+    UINT8                           preg_idx;
+    bt_status_t                     bt_status;
+
+    BTIF_TRACE_DEBUG2("%s event %d", __FUNCTION__, event);
+    btif_hl_display_calling_process_name();
+
+    switch (event)
+    {
+        case BTIF_HL_SEND_CONNECTED_CB:
+        case BTIF_HL_SEND_DISCONNECTED_CB:
+            if (p_data->chan_cb.cb_state == BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING)
+                state = BTHL_CONN_STATE_CONNECTED;
+            else if (p_data->chan_cb.cb_state == BTIF_HL_CHAN_CB_STATE_DISCONNECTED_PENDING)
+                state = BTHL_CONN_STATE_DISCONNECTED;
+            else
+                send_chan_cb = FALSE;
+
+            if (send_chan_cb)
+            {
+                btif_hl_copy_bda(&bd_addr, p_data->chan_cb.bd_addr);
+                BTIF_TRACE_DEBUG4("state callbk: ch_id=0x%08x cb_state=%d state=%d  fd=%d",
+                                  p_data->chan_cb.channel_id,
+                                  p_data->chan_cb.cb_state,
+                                  state,  p_data->chan_cb.fd);
+                btif_hl_display_bt_bda(&bd_addr);
+                BTIF_HL_CALL_CBACK(bt_hl_callbacks, channel_state_cb,  p_data->chan_cb.app_id,
+                                   &bd_addr, p_data->chan_cb.mdep_cfg_index,
+                                   p_data->chan_cb.channel_id, state, p_data->chan_cb.fd );
+            }
+
+            break;
+        case BTIF_HL_REG_APP:
+            p_acb  = BTIF_HL_GET_APP_CB_PTR(p_data->reg.app_idx);
+            app_id = (int) p_acb->app_id;
+            BTIF_TRACE_DEBUG2("Rcv BTIF_HL_REG_APP app_idx=%d reg_pending=%d", p_data->reg.app_idx, p_acb->reg_pending);
+            if (btif_hl_get_state() == BTIF_HL_STATE_ENABLED && p_acb->reg_pending )
+            {
+                p_acb->reg_pending = FALSE;
+
+                reg_param.dev_type = p_acb->dev_type;
+                reg_param.sec_mask = BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT;
+                reg_param.p_srv_name = p_acb->srv_name;
+                reg_param.p_srv_desp = p_acb->srv_desp;
+                reg_param.p_provider_name = p_acb->provider_name;
+                btif_hl_proc_reg_request (p_data->reg.app_idx, p_acb->app_id, &reg_param, btif_hl_cback);
+            }
+            else
+            {
+                BTIF_TRACE_DEBUG2("reg request is processed state=%d reg_pending=%d", btif_hl_get_state(), p_acb->reg_pending);
+            }
+
+            break;
+
+        case BTIF_HL_UNREG_APP:
+            BTIF_TRACE_DEBUG1("Rcv BTIF_HL_UNREG_APP app_idx=%d", p_data->unreg.app_idx );
+            p_acb = BTIF_HL_GET_APP_CB_PTR(p_data->unreg.app_idx);
+            BTA_HlDeregister(p_acb->app_handle);
+            break;
+        case BTIF_HL_UPDATE_MDL:
+            BTIF_TRACE_DEBUG1("Rcv BTIF_HL_UPDATE_MDL app_idx=%d", p_data->update_mdl.app_idx );
+            p_acb = BTIF_HL_GET_APP_CB_PTR(p_data->update_mdl.app_idx);
+            BTIF_TRACE_DEBUG1("app_nv_idx=%d", p_acb->app_nv_idx );
+            bt_status = btif_storage_write_hl_mdl_data(p_acb->app_nv_idx,(char *) &p_acb->mdl_cfg[0],
+                                                       sizeof(btif_hl_nv_mdl_data_t));
+            BTIF_TRACE_DEBUG1("bt_status=%d",  bt_status);
+            break;
+
+        default:
+            BTIF_TRACE_ERROR1("Unknown event %d", event);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_upstreams_evt
+**
+** Description      Process HL events
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_upstreams_evt(UINT16 event, char* p_param){
+    tBTA_HL *p_data = (tBTA_HL *)p_param;
+    UINT8                 app_idx, mcl_idx;
+    btif_hl_app_cb_t      *p_acb;
+    btif_hl_mcl_cb_t      *p_mcb = NULL;
+    BD_ADDR               bd_addr;
+    btif_hl_pend_dch_op_t  pending_op;
+    BOOLEAN status;
+
+    BTIF_TRACE_DEBUG2("%s event %d", __FUNCTION__, event);
+    btif_hl_display_calling_process_name();
+    switch (event)
+    {
+        case BTA_HL_REGISTER_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_REGISTER_CFM_EVT");
+            BTIF_TRACE_DEBUG3("app_id=%d app_handle=%d status=%d ",
+                              p_data->reg_cfm.app_id,
+                              p_data->reg_cfm.app_handle,
+                              p_data->reg_cfm.status );
+
+            btif_hl_proc_reg_cfm(p_data);
+            break;
+        case BTA_HL_SDP_INFO_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_SDP_INFO_IND_EVT");
+            BTIF_TRACE_DEBUG5("app_handle=%d ctrl_psm=0x%04x data_psm=0x%04x x_spec=%d mcap_sup_procs=0x%02x",
+                              p_data->sdp_info_ind.app_handle,
+                              p_data->sdp_info_ind.ctrl_psm,
+                              p_data->sdp_info_ind.data_psm,
+                              p_data->sdp_info_ind.data_x_spec,
+                              p_data->sdp_info_ind.mcap_sup_procs);
+            btif_hl_proc_sdp_info_ind(p_data);
+            break;
+
+        case BTA_HL_DEREGISTER_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DEREGISTER_CFM_EVT");
+            BTIF_TRACE_DEBUG2("app_handle=%d status=%d ",
+                              p_data->dereg_cfm.app_handle,
+                              p_data->dereg_cfm.status );
+            btif_hl_proc_dereg_cfm(p_data);
+            break;
+
+        case BTA_HL_SDP_QUERY_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_SDP_QUERY_CFM_EVT");
+            BTIF_TRACE_DEBUG2("app_handle=%d status =%d",
+                              p_data->sdp_query_cfm.app_handle,
+                              p_data->sdp_query_cfm.status);
+
+            BTIF_TRACE_DEBUG6("DB [%02x] [%02x] [%02x] [%02x] [%02x] [%02x]",
+                              p_data->sdp_query_cfm.bd_addr[0], p_data->sdp_query_cfm.bd_addr[1],
+                              p_data->sdp_query_cfm.bd_addr[2], p_data->sdp_query_cfm.bd_addr[3],
+                              p_data->sdp_query_cfm.bd_addr[4], p_data->sdp_query_cfm.bd_addr[5]);
+
+            if (p_data->sdp_query_cfm.status == BTA_HL_STATUS_OK)
+                status = btif_hl_proc_sdp_query_cfm(p_data);
+            else
+                status = FALSE;
+
+            if (!status)
+            {
+                if (btif_hl_find_app_idx_using_handle(p_data->sdp_query_cfm.app_handle, &app_idx))
+                {
+                    p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+                    if (btif_hl_find_mcl_idx(app_idx, p_data->sdp_query_cfm.bd_addr, &mcl_idx))
+                    {
+                        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                        if ( (p_mcb->cch_oper =  BTIF_HL_CCH_OP_MDEP_FILTERING) ||
+                             (p_mcb->cch_oper == BTIF_HL_CCH_OP_DCH_OPEN) )
+                        {
+                            pending_op = p_mcb->pcb.op;
+                            switch (pending_op)
+                            {
+                                case BTIF_HL_PEND_DCH_OP_OPEN:
+                                    btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+                                    break;
+                                case BTIF_HL_PEND_DCH_OP_RECONNECT:
+                                case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                                default:
+                                    break;
+                            }
+                            if (!p_mcb->is_connected)
+                                btif_hl_clean_mcl_cb(app_idx, mcl_idx);
+                        }
+                    }
+                }
+            }
+
+            break;
+
+
+        case BTA_HL_CCH_OPEN_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CCH_OPEN_CFM_EVT");
+            BTIF_TRACE_DEBUG3("app_handle=%d mcl_handle=%d status =%d",
+                              p_data->cch_open_cfm.app_handle,
+                              p_data->cch_open_cfm.mcl_handle,
+                              p_data->cch_open_cfm.status);
+            BTIF_TRACE_DEBUG6("DB [%02x] [%02x] [%02x] [%02x] [%02x] [%02x]",
+                              p_data->cch_open_cfm.bd_addr[0], p_data->cch_open_cfm.bd_addr[1],
+                              p_data->cch_open_cfm.bd_addr[2], p_data->cch_open_cfm.bd_addr[3],
+                              p_data->cch_open_cfm.bd_addr[4], p_data->cch_open_cfm.bd_addr[5]);
+
+            if (p_data->cch_open_cfm.status == BTA_HL_STATUS_OK)
+            {
+                status = btif_hl_proc_cch_open_cfm(p_data);
+            }
+            else
+            {
+                status = FALSE;
+            }
+
+            if (!status)
+            {
+                if (btif_hl_find_app_idx_using_handle(p_data->cch_open_cfm.app_handle, &app_idx))
+                {
+                    p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+                    if (btif_hl_find_mcl_idx(app_idx, p_data->cch_open_cfm.bd_addr, &mcl_idx))
+                    {
+                        p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                        pending_op = p_mcb->pcb.op;
+                        switch (pending_op)
+                        {
+                            case BTIF_HL_PEND_DCH_OP_OPEN:
+                                btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+                                break;
+                            case BTIF_HL_PEND_DCH_OP_RECONNECT:
+                            case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                            default:
+                                break;
+                        }
+                        btif_hl_clean_mcl_cb(app_idx, mcl_idx);
+                    }
+                }
+            }
+            break;
+
+        case BTA_HL_DCH_OPEN_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_OPEN_CFM_EVT");
+            BTIF_TRACE_DEBUG3("mcl_handle=%d mdl_handle=0x%x status=%d ",
+                              p_data->dch_open_cfm.mcl_handle,
+                              p_data->dch_open_cfm.mdl_handle,
+                              p_data->dch_open_cfm.status);
+            BTIF_TRACE_DEBUG5("first_reliable =%d dch_mode=%d local_mdep_id=%d mdl_id=%d mtu=%d",
+                              p_data->dch_open_cfm.first_reliable,
+                              p_data->dch_open_cfm.dch_mode,
+                              p_data->dch_open_cfm.local_mdep_id,
+                              p_data->dch_open_cfm.mdl_id,
+                              p_data->dch_open_cfm.mtu);
+            if (p_data->dch_open_cfm.status == BTA_HL_STATUS_OK)
+            {
+                status = btif_hl_proc_dch_open_cfm(p_data);
+            }
+            else
+            {
+                status = FALSE;
+            }
+
+            if (!status)
+            {
+                if (btif_hl_find_mcl_idx_using_handle(p_data->dch_open_cfm.mcl_handle,&app_idx, &mcl_idx))
+                {
+                    p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                    pending_op = p_mcb->pcb.op;
+                    switch (pending_op)
+                    {
+                        case BTIF_HL_PEND_DCH_OP_OPEN:
+                            btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+                            break;
+                        case BTIF_HL_PEND_DCH_OP_RECONNECT:
+                        case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                        default:
+                            break;
+                    }
+                }
+            }
+            break;
+
+
+        case BTA_HL_CCH_OPEN_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CCH_OPEN_IND_EVT");
+            BTIF_TRACE_DEBUG2("app_handle=%d mcl_handle=%d",
+                              p_data->cch_open_ind.app_handle,
+                              p_data->cch_open_ind.mcl_handle);
+            BTIF_TRACE_DEBUG6("DB [%02x] [%02x] [%02x] [%02x] [%02x] [%02x]",
+                              p_data->cch_open_ind.bd_addr[0], p_data->cch_open_ind.bd_addr[1],
+                              p_data->cch_open_ind.bd_addr[2], p_data->cch_open_ind.bd_addr[3],
+                              p_data->cch_open_ind.bd_addr[4], p_data->cch_open_ind.bd_addr[5]);
+
+            btif_hl_proc_cch_open_ind(p_data);
+            break;
+
+        case BTA_HL_DCH_CREATE_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_CREATE_IND_EVT");
+            BTIF_TRACE_DEBUG1("mcl_handle=%d",
+                              p_data->dch_create_ind.mcl_handle );
+            BTIF_TRACE_DEBUG3("local_mdep_id =%d mdl_id=%d cfg=%d",
+                              p_data->dch_create_ind.local_mdep_id,
+                              p_data->dch_create_ind.mdl_id,
+                              p_data->dch_create_ind.cfg);
+            btif_hl_proc_create_ind(p_data);
+            break;
+
+        case BTA_HL_DCH_OPEN_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_OPEN_IND_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle=%d mdl_handle=0x%x",
+                              p_data->dch_open_ind.mcl_handle,
+                              p_data->dch_open_ind.mdl_handle );
+            BTIF_TRACE_DEBUG5("first_reliable =%d dch_mode=%d local_mdep_id=%d mdl_id=%d mtu=%d",
+                              p_data->dch_open_ind.first_reliable,
+                              p_data->dch_open_ind.dch_mode,
+                              p_data->dch_open_ind.local_mdep_id,
+                              p_data->dch_open_ind.mdl_id,
+                              p_data->dch_open_ind.mtu);
+
+            btif_hl_proc_dch_open_ind(p_data);
+            break;
+
+        case BTA_HL_DELETE_MDL_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DELETE_MDL_IND_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle=%d mdl_id=0x%x",
+                              p_data->delete_mdl_ind.mcl_handle,
+                              p_data->delete_mdl_ind.mdl_id);
+            if (btif_hl_find_mcl_idx_using_handle( p_data->delete_mdl_ind.mcl_handle, &app_idx, &mcl_idx))
+            {
+                p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                /* todo send callback find channel id from NV? */
+            }
+            break;
+
+        case BTA_HL_DELETE_MDL_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DELETE_MDL_CFM_EVT");
+            BTIF_TRACE_DEBUG3("mcl_handle=%d mdl_id=0x%x status=%d",
+                              p_data->delete_mdl_cfm.mcl_handle,
+                              p_data->delete_mdl_cfm.mdl_id,
+                              p_data->delete_mdl_cfm.status);
+
+
+            if (btif_hl_find_mcl_idx_using_handle( p_data->delete_mdl_cfm.mcl_handle, &app_idx,&mcl_idx))
+            {
+                p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+
+                btif_hl_send_destroyed_cb(p_acb);
+                btif_hl_clean_delete_mdl(&p_acb->delete_mdl);
+                /* todo if delete mdl failed we still report mdl delete ok and remove the mld_id from NV*/
+            }
+            break;
+
+        case BTA_HL_DCH_RECONNECT_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_RECONNECT_CFM_EVT");
+            BTIF_TRACE_DEBUG3("mcl_handle=%d mdl_handle=%d status=%d   ",
+                              p_data->dch_reconnect_cfm.mcl_handle,
+                              p_data->dch_reconnect_cfm.mdl_handle,
+                              p_data->dch_reconnect_cfm.status);
+            BTIF_TRACE_DEBUG4("first_reliable =%d dch_mode=%d mdl_id=%d mtu=%d",
+                              p_data->dch_reconnect_cfm.first_reliable,
+                              p_data->dch_reconnect_cfm.dch_mode,
+                              p_data->dch_reconnect_cfm.mdl_id,
+                              p_data->dch_reconnect_cfm.mtu);
+
+
+            if (p_data->dch_reconnect_cfm.status == BTA_HL_STATUS_OK)
+            {
+                status = btif_hl_proc_dch_reconnect_cfm(p_data);
+            }
+            else
+            {
+                status = FALSE;
+            }
+
+            if (!status)
+            {
+                if (btif_hl_find_mcl_idx_using_handle(p_data->dch_open_cfm.mcl_handle,&app_idx, &mcl_idx))
+                {
+                    p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                    pending_op = p_mcb->pcb.op;
+                    switch (pending_op)
+                    {
+                        case BTIF_HL_PEND_DCH_OP_OPEN:
+                            btif_hl_send_setup_disconnected_cb(app_idx, mcl_idx);
+                            break;
+                        case BTIF_HL_PEND_DCH_OP_RECONNECT:
+                        case BTIF_HL_PEND_DCH_OP_DELETE_MDL:
+                        default:
+                            break;
+                    }
+                }
+            }
+
+            break;
+
+        case BTA_HL_CCH_CLOSE_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CCH_CLOSE_CFM_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle=%d status =%d",
+                              p_data->cch_close_cfm.mcl_handle,
+                              p_data->cch_close_cfm.status);
+            if (p_data->cch_close_cfm.status == BTA_HL_STATUS_OK)
+            {
+                btif_hl_proc_cch_close_cfm(p_data);
+            }
+            break;
+
+        case BTA_HL_CCH_CLOSE_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CCH_CLOSE_IND_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle =%d intentional_close=%s",
+                              p_data->cch_close_ind.mcl_handle,
+                              (p_data->cch_close_ind.intentional?"Yes":"No"));
+
+            btif_hl_proc_cch_close_ind(p_data);
+            break;
+
+        case BTA_HL_DCH_CLOSE_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_CLOSE_IND_EVT");
+            BTIF_TRACE_DEBUG2("mdl_handle=%d intentional_close=%s",
+                              p_data->dch_close_ind.mdl_handle,
+                              (p_data->dch_close_ind.intentional?"Yes":"No") );
+
+            btif_hl_proc_dch_close_ind(p_data);
+            break;
+
+        case BTA_HL_DCH_CLOSE_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_CLOSE_CFM_EVT");
+            BTIF_TRACE_DEBUG2("mdl_handle=%d status=%d ",
+                              p_data->dch_close_cfm.mdl_handle,
+                              p_data->dch_close_cfm.status);
+
+            if (p_data->dch_close_cfm.status == BTA_HL_STATUS_OK)
+            {
+                btif_hl_proc_dch_close_cfm(p_data);
+            }
+            break;
+
+        case BTA_HL_DCH_ECHO_TEST_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_ECHO_TEST_CFM_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle=%d    status=%d",
+                              p_data->echo_test_cfm.mcl_handle,
+                              p_data->echo_test_cfm.status );
+            /* not supported */
+            break;
+
+
+        case BTA_HL_DCH_RECONNECT_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_RECONNECT_IND_EVT");
+
+            BTIF_TRACE_DEBUG2("mcl_handle=%d mdl_handle=5d",
+                              p_data->dch_reconnect_ind.mcl_handle,
+                              p_data->dch_reconnect_ind.mdl_handle );
+            BTIF_TRACE_DEBUG4("first_reliable =%d dch_mode=%d mdl_id=%d mtu=%d",
+                              p_data->dch_reconnect_ind.first_reliable,
+                              p_data->dch_reconnect_ind.dch_mode,
+                              p_data->dch_reconnect_ind.mdl_id,
+                              p_data->dch_reconnect_ind.mtu);
+
+            btif_hl_proc_dch_reconnect_ind(p_data);
+            break;
+
+        case BTA_HL_CONG_CHG_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CONG_CHG_IND_EVT");
+            BTIF_TRACE_DEBUG2("mdl_handle=%d cong =%d",
+                              p_data->dch_cong_ind.mdl_handle,
+                              p_data->dch_cong_ind.cong);
+            btif_hl_proc_dch_cong_ind(p_data);
+            break;
+
+        case BTA_HL_DCH_ABORT_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_ABORT_IND_EVT");
+            BTIF_TRACE_DEBUG1("mcl_handle=%d",
+                              p_data->dch_abort_ind.mcl_handle );
+            btif_hl_proc_abort_ind(p_data->dch_abort_ind.mcl_handle);
+            break;
+        case BTA_HL_DCH_ABORT_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_ABORT_CFM_EVT");
+            BTIF_TRACE_DEBUG2("mcl_handle=%d status =%d",
+                              p_data->dch_abort_cfm.mcl_handle,
+                              p_data->dch_abort_cfm.status);
+            if (p_data->dch_abort_cfm.status == BTA_HL_STATUS_OK)
+            {
+                btif_hl_proc_abort_cfm(p_data->dch_abort_ind.mcl_handle);
+            }
+            break;
+
+        case BTA_HL_DCH_SEND_DATA_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_SEND_DATA_CFM_EVT");
+            BTIF_TRACE_DEBUG2("mdl_handle=0x%x status =%d",
+                              p_data->dch_send_data_cfm.mdl_handle,
+                              p_data->dch_send_data_cfm.status);
+            btif_hl_proc_send_data_cfm(p_data->dch_send_data_cfm.mdl_handle,
+                                       p_data->dch_send_data_cfm.status);
+            break;
+
+        case BTA_HL_DCH_RCV_DATA_IND_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_DCH_RCV_DATA_IND_EVT");
+            BTIF_TRACE_DEBUG1("mdl_handle=0x%x ",
+                              p_data->dch_rcv_data_ind.mdl_handle);
+            /* do nothing here */
+            break;
+
+        default:
+            BTIF_TRACE_DEBUG1("Unknown Event (0x%02x)...", event);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_cback
+**
+** Description      Callback function for HL events
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_cback(tBTA_HL_EVT event, tBTA_HL *p_data){
+    bt_status_t status;
+    int param_len = 0;
+    BTIF_TRACE_DEBUG2("%s event %d", __FUNCTION__, event);
+    btif_hl_display_calling_process_name();
+    switch (event)
+    {
+        case BTA_HL_REGISTER_CFM_EVT:
+            param_len = sizeof(tBTA_HL_REGISTER_CFM);
+            break;
+        case BTA_HL_SDP_INFO_IND_EVT:
+            param_len = sizeof(tBTA_HL_SDP_INFO_IND);
+            break;
+        case BTA_HL_DEREGISTER_CFM_EVT:
+            param_len = sizeof(tBTA_HL_DEREGISTER_CFM);
+            break;
+        case BTA_HL_SDP_QUERY_CFM_EVT:
+            param_len = sizeof(tBTA_HL_SDP_QUERY_CFM);
+            break;
+        case BTA_HL_CCH_OPEN_CFM_EVT:
+            param_len = sizeof(tBTA_HL_CCH_OPEN_CFM);
+            break;
+        case BTA_HL_DCH_OPEN_CFM_EVT:
+            param_len = sizeof(tBTA_HL_DCH_OPEN_CFM);
+            break;
+        case BTA_HL_CCH_OPEN_IND_EVT:
+            param_len = sizeof(tBTA_HL_CCH_OPEN_IND);
+            break;
+        case BTA_HL_DCH_CREATE_IND_EVT:
+            param_len = sizeof(tBTA_HL_DCH_CREATE_IND);
+            break;
+        case BTA_HL_DCH_OPEN_IND_EVT:
+            param_len = sizeof(tBTA_HL_DCH_OPEN_IND);
+            break;
+        case BTA_HL_DELETE_MDL_IND_EVT:
+            param_len = sizeof(tBTA_HL_MDL_IND);
+            break;
+        case BTA_HL_DELETE_MDL_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MDL_CFM);
+            break;
+        case BTA_HL_DCH_RECONNECT_CFM_EVT:
+            param_len = sizeof(tBTA_HL_DCH_OPEN_CFM);
+            break;
+        case BTA_HL_CCH_CLOSE_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MCL_CFM);
+            break;
+        case BTA_HL_CCH_CLOSE_IND_EVT:
+            param_len = sizeof(tBTA_HL_CCH_CLOSE_IND);
+            break;
+        case BTA_HL_DCH_CLOSE_IND_EVT:
+            param_len = sizeof(tBTA_HL_DCH_CLOSE_IND);
+            break;
+        case BTA_HL_DCH_CLOSE_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MDL_CFM);
+            break;
+        case BTA_HL_DCH_ECHO_TEST_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MCL_CFM);
+            break;
+        case BTA_HL_DCH_RECONNECT_IND_EVT:
+            param_len = sizeof(tBTA_HL_DCH_OPEN_IND);
+            break;
+        case BTA_HL_CONG_CHG_IND_EVT:
+            param_len = sizeof(tBTA_HL_DCH_CONG_IND);
+            break;
+        case BTA_HL_DCH_ABORT_IND_EVT:
+            param_len = sizeof(tBTA_HL_MCL_IND);
+            break;
+        case BTA_HL_DCH_ABORT_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MCL_CFM);
+            break;
+        case BTA_HL_DCH_SEND_DATA_CFM_EVT:
+            param_len = sizeof(tBTA_HL_MDL_CFM);
+            break;
+        case BTA_HL_DCH_RCV_DATA_IND_EVT:
+            param_len = sizeof(tBTA_HL_MDL_IND);
+            break;
+        default:
+            param_len = sizeof(tBTA_HL_MDL_IND);
+            break;
+    }
+    status = btif_transfer_context(btif_hl_upstreams_evt, (uint16_t)event, (void*)p_data, param_len, NULL);
+
+    /* catch any failed context transfers */
+    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_upstreams_ctrl_evt
+**
+** Description      Callback function for HL control events in the BTIF task context
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_upstreams_ctrl_evt(UINT16 event, char* p_param){
+    tBTA_HL_CTRL *p_data = (tBTA_HL_CTRL *) p_param;
+    UINT8               i;
+    tBTA_HL_REG_PARAM   reg_param;
+    btif_hl_app_cb_t    *p_acb;
+
+    BTIF_TRACE_DEBUG2("%s event %d", __FUNCTION__, event);
+    btif_hl_display_calling_process_name();
+
+    switch ( event )
+    {
+        case BTA_HL_CTRL_ENABLE_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CTRL_ENABLE_CFM_EVT");
+            BTIF_TRACE_DEBUG1("status=%d", p_data->enable_cfm.status);
+
+            if (p_data->enable_cfm.status == BTA_HL_STATUS_OK)
+            {
+                btif_hl_set_state(BTIF_HL_STATE_ENABLED);
+
+
+                for (i=0; i < BTA_HL_NUM_APPS ; i ++)
+                {
+                    p_acb = BTIF_HL_GET_APP_CB_PTR(i);
+                    if (p_acb->in_use && p_acb->reg_pending)
+                    {
+                        p_acb->reg_pending = FALSE;
+                        reg_param.dev_type = p_acb->dev_type;
+                        reg_param.sec_mask = BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT;
+                        reg_param.p_srv_name = p_acb->srv_name;
+                        reg_param.p_srv_desp = p_acb->srv_desp;
+                        reg_param.p_provider_name = p_acb->provider_name;
+
+                        BTIF_TRACE_DEBUG1("Register pending app_id=%d", p_acb->app_id);
+                        btif_hl_proc_reg_request (i, p_acb->app_id, &reg_param, btif_hl_cback);
+                    }
+                }
+            }
+
+            break;
+        case BTA_HL_CTRL_DISABLE_CFM_EVT:
+            BTIF_TRACE_DEBUG0("Rcv BTA_HL_CTRL_DISABLE_CFM_EVT");
+            BTIF_TRACE_DEBUG1("status=%d",
+                              p_data->disable_cfm.status);
+
+            if (p_data->disable_cfm.status == BTA_HL_STATUS_OK)
+            {
+                memset(p_btif_hl_cb, 0, sizeof(btif_hl_cb_t));
+                btif_hl_set_state(BTIF_HL_STATE_DISABLED);
+            }
+
+            break;
+        default:
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_ctrl_cback
+**
+** Description      Callback function for HL control events
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btif_hl_ctrl_cback(tBTA_HL_CTRL_EVT event, tBTA_HL_CTRL *p_data){
+    bt_status_t status;
+    int param_len = 0;
+
+    BTIF_TRACE_DEBUG2("%s event %d", __FUNCTION__, event);
+    btif_hl_display_calling_process_name();
+
+    switch ( event )
+    {
+        case BTA_HL_CTRL_ENABLE_CFM_EVT:
+        case BTA_HL_CTRL_DISABLE_CFM_EVT:
+            param_len = sizeof(tBTA_HL_CTRL_ENABLE_DISABLE);
+            break;
+        default:
+            break;
+    }
+
+    status = btif_transfer_context(btif_hl_upstreams_ctrl_evt, (uint16_t)event, (void*)p_data, param_len, NULL);
+    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+}
+/*******************************************************************************
+**
+** Function         connect_channel
+**
+** Description     connect a data channel
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t connect_channel(int app_id, bt_bdaddr_t *bd_addr, int mdep_cfg_index, int *channel_id){
+    UINT8                   app_idx, mcl_idx;
+    btif_hl_app_cb_t        *p_acb = NULL;
+    btif_hl_mcl_cb_t        *p_mcb=NULL;
+    bt_status_t             status = BT_STATUS_SUCCESS;
+    tBTA_HL_DCH_OPEN_PARAM  dch_open;
+    BD_ADDR                 bda;
+    UINT8 i;
+
+    CHECK_BTHL_INIT();
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    btif_hl_display_calling_process_name();
+
+
+    for (i=0; i<6; i++)
+    {
+        bda[i] = (UINT8) bd_addr->address[i];
+    }
+    if (btif_hl_find_app_idx(((UINT8)app_id), &app_idx))
+    {
+        p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        if (btif_hl_find_mcl_idx(app_idx, bda , &mcl_idx))
+        {
+            p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+            if (p_mcb->is_connected)
+            {
+                dch_open.ctrl_psm = p_mcb->ctrl_psm;
+                dch_open.local_mdep_id = p_acb->sup_feature.mdep[mdep_cfg_index].mdep_id;
+                if (btif_hl_find_peer_mdep_id(p_acb->app_id, p_mcb->bd_addr,
+                                              p_acb->sup_feature.mdep[mdep_cfg_index].mdep_cfg.mdep_role,
+                                              p_acb->sup_feature.mdep[mdep_cfg_index].mdep_cfg.data_cfg[0].data_type, &dch_open.peer_mdep_id ))
+                {
+                    dch_open.local_cfg = p_acb->channel_type[mdep_cfg_index];
+                    if ((p_acb->sup_feature.mdep[mdep_cfg_index].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SOURCE)
+                        && !btif_hl_is_the_first_reliable_existed(app_idx,mcl_idx))
+                    {
+                        dch_open.local_cfg = BTA_HL_DCH_CFG_RELIABLE;
+                    }
+                    dch_open.sec_mask = (BTA_SEC_AUTHENTICATE | BTA_SEC_ENCRYPT);
+
+                    if( !btif_hl_dch_open(p_acb->app_id, bda, &dch_open,
+                                              mdep_cfg_index, BTIF_HL_PEND_DCH_OP_OPEN, channel_id ))
+                    {
+                        status = BT_STATUS_FAIL;
+                        BTIF_TRACE_EVENT1("%s loc0 status = BT_STATUS_FAIL", __FUNCTION__);
+                    }
+                }
+                else
+                {
+                    status = BT_STATUS_FAIL;
+                }
+            }
+            else
+            {
+                status = BT_STATUS_FAIL;
+            }
+        }
+        else
+        {
+            p_acb->filter.num_elems =1;
+            p_acb->filter.elem[0].data_type = p_acb->sup_feature.mdep[mdep_cfg_index].mdep_cfg.data_cfg[mdep_cfg_index].data_type;
+            if (p_acb->sup_feature.mdep[mdep_cfg_index].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SINK)
+                p_acb->filter.elem[0].peer_mdep_role = BTA_HL_MDEP_ROLE_SOURCE;
+            else
+                p_acb->filter.elem[0].peer_mdep_role = BTA_HL_MDEP_ROLE_SINK;
+
+            if ( !btif_hl_cch_open(p_acb->app_id, bda, 0, mdep_cfg_index,
+                                   BTIF_HL_PEND_DCH_OP_OPEN,
+                                   channel_id))
+            {
+                status = BT_STATUS_FAIL;
+            }
+        }
+    }
+    else
+    {
+        status = BT_STATUS_FAIL;
+    }
+
+    BTIF_TRACE_DEBUG3("%s status=%d channel_id=0x%08x", __FUNCTION__, status, *channel_id);
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         destroy_channel
+**
+** Description      destroy a data channel
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t destroy_channel(int channel_id){
+    UINT8 app_idx, mcl_idx, mdl_idx, mdl_cfg_idx, app_id, mdep_cfg_idx;
+    bt_status_t status = BT_STATUS_SUCCESS;
+    btif_hl_mdl_cfg_t     *p_mdl;
+    btif_hl_mcl_cb_t     *p_mcb;
+    btif_hl_app_cb_t     *p_acb;
+
+    CHECK_BTHL_INIT();
+    BTIF_TRACE_EVENT2("%s channel_id=0x%08x", __FUNCTION__, channel_id);
+    btif_hl_display_calling_process_name();
+
+
+    if (btif_hl_if_channel_setup_pending(channel_id, &app_idx, &mcl_idx))
+    {
+        btif_hl_dch_abort(app_idx, mcl_idx);
+    }
+    else
+    {
+        if (btif_hl_find_mdl_cfg_idx_using_channel_id(channel_id, &app_idx, &mdl_cfg_idx))
+        {
+            p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+            if (!p_acb->delete_mdl.active)
+            {
+                p_mdl =BTIF_HL_GET_MDL_CFG_PTR(app_idx, mdl_cfg_idx);
+                p_acb->delete_mdl.active = TRUE;
+                p_acb->delete_mdl.mdl_id = p_mdl->base.mdl_id;
+                p_acb->delete_mdl.channel_id = channel_id;
+                p_acb->delete_mdl.mdep_cfg_idx = p_mdl->extra.mdep_cfg_idx;
+                memcpy(p_acb->delete_mdl.bd_addr, p_mdl->base.peer_bd_addr,sizeof(BD_ADDR));
+
+                if (btif_hl_find_mcl_idx(app_idx, p_mdl->base.peer_bd_addr, &mcl_idx))
+                {
+                    p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+                    if (p_mcb->is_connected)
+                    {
+                        BTIF_TRACE_DEBUG1("calling BTA_HlDeleteMdl mdl_id=%d",p_acb->delete_mdl.mdl_id );
+                        BTA_HlDeleteMdl(p_mcb->mcl_handle, p_acb->delete_mdl.mdl_id);
+                    }
+                    else
+                    {
+                        status = BT_STATUS_FAIL;
+                    }
+                }
+                else
+                {
+                    BTIF_TRACE_DEBUG0("btif_hl_delete_mdl calling btif_hl_cch_open"  );
+                    mdep_cfg_idx = p_mdl->extra.mdep_cfg_idx;
+                    p_acb->filter.num_elems =1;
+                    p_acb->filter.elem[0].data_type = p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.data_cfg[mdep_cfg_idx].data_type;
+                    if (p_acb->sup_feature.mdep[mdep_cfg_idx].mdep_cfg.mdep_role == BTA_HL_MDEP_ROLE_SINK)
+                        p_acb->filter.elem[0].peer_mdep_role = BTA_HL_MDEP_ROLE_SOURCE;
+                    else
+                        p_acb->filter.elem[0].peer_mdep_role = BTA_HL_MDEP_ROLE_SINK;
+                    if (btif_hl_cch_open(p_acb->app_id, p_acb->delete_mdl.bd_addr, 0,
+                                         mdep_cfg_idx,
+                                         BTIF_HL_PEND_DCH_OP_DELETE_MDL, NULL))
+                    {
+                        status = BT_STATUS_FAIL;
+                    }
+                }
+
+                if (  status == BT_STATUS_FAIL)
+                {
+                    /* fail for now  */
+                    btif_hl_clean_delete_mdl(&p_acb->delete_mdl);
+                }
+            }
+            else
+            {
+                status = BT_STATUS_BUSY;
+            }
+        }
+        else
+        {
+            status = BT_STATUS_FAIL;
+        }
+
+    }
+    return status;
+}
+/*******************************************************************************
+**
+** Function         unregister_application
+**
+** Description     unregister an HDP application
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t unregister_application(int app_id){
+    btif_hl_app_cb_t    *p_acb;
+    UINT8               app_idx;
+    int                 len;
+    bt_status_t         status = BT_STATUS_SUCCESS;
+    btif_hl_evt_cb_t    evt_param;
+
+    CHECK_BTHL_INIT();
+    BTIF_TRACE_EVENT2("%s app_id=%d", __FUNCTION__, app_id);
+    btif_hl_display_calling_process_name();
+
+    if (btif_hl_find_app_idx(((UINT8)app_id), &app_idx))
+    {
+        evt_param.unreg.app_idx = app_idx;
+        len = sizeof(btif_hl_unreg_t);
+        status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_UNREG_APP,
+                                        (char*) &evt_param, len, NULL);
+        ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+
+
+
+    }
+    else
+    {
+        status  = BT_STATUS_FAIL;
+    }
+
+    BTIF_TRACE_DEBUG1("de-reg return status=%d", status);
+    return status;
+}
+/*******************************************************************************
+**
+** Function         register_application
+**
+** Description     register an HDP application
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t register_application(bthl_reg_param_t *p_reg_param, int *app_id){
+    btif_hl_app_cb_t            *p_acb;
+    tBTA_HL_SUP_FEATURE         *p_sup;
+    tBTA_HL_MDEP_CFG            *p_cfg;
+    tBTA_HL_MDEP_DATA_TYPE_CFG  *p_data;
+    UINT8                       app_idx=0, i=0, pending_reg_idx=0;
+    bthl_mdep_cfg_t             *p_mdep_cfg;
+    bt_status_t                 status = BT_STATUS_SUCCESS;
+    btif_hl_evt_cb_t            evt_param;
+    int                         len;
+
+    CHECK_BTHL_INIT();
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    btif_hl_display_calling_process_name();
+
+    if (btif_hl_get_state() == BTIF_HL_STATE_DISABLED)
+    {
+        btif_hl_init();
+        btif_hl_set_state(BTIF_HL_STATE_ENABLING);
+        BTA_HlEnable(btif_hl_ctrl_cback);
+    }
+
+    if (!btif_hl_find_avail_app_idx(&app_idx))
+    {
+        BTIF_TRACE_ERROR0("Unable to allocate a new application control block");
+        return BT_STATUS_FAIL;
+    }
+
+    p_acb = BTIF_HL_GET_APP_CB_PTR(app_idx);
+    p_acb->in_use = TRUE;
+
+
+    p_acb->app_id = btif_hl_get_next_app_id();
+
+    if (p_reg_param->application_name != NULL )
+        strncpy(p_acb->application_name, p_reg_param->application_name, BTIF_HL_APPLICATION_NAME_LEN);
+
+    if (p_reg_param->provider_name != NULL )
+        strncpy(p_acb->provider_name, p_reg_param->provider_name, BTA_PROVIDER_NAME_LEN);
+
+    if (p_reg_param->srv_name != NULL )
+        strncpy(p_acb->srv_name, p_reg_param->srv_name, BTA_SERVICE_NAME_LEN);
+
+    if (p_reg_param->srv_desp != NULL )
+        strncpy(p_acb->srv_desp, p_reg_param->srv_desp, BTA_SERVICE_DESP_LEN);
+
+    p_sup = &p_acb->sup_feature;
+    p_sup->advertize_source_sdp = TRUE;
+    p_sup->echo_cfg.max_rx_apdu_size = BTIF_HL_ECHO_MAX_TX_RX_APDU_SIZE;
+    p_sup->echo_cfg.max_tx_apdu_size = BTIF_HL_ECHO_MAX_TX_RX_APDU_SIZE;
+    p_sup->num_of_mdeps = p_reg_param->number_of_mdeps;
+
+    for (i=0, p_mdep_cfg = p_reg_param->mdep_cfg ; i<  p_sup->num_of_mdeps; i++, p_mdep_cfg++  )
+    {
+        p_cfg = &p_sup->mdep[i].mdep_cfg;
+        p_cfg->num_of_mdep_data_types = 1;
+        p_data  = &p_cfg->data_cfg[0];
+
+        if ( !btif_hl_get_bta_mdep_role(p_mdep_cfg->mdep_role, &(p_cfg->mdep_role)))
+        {
+            BTIF_TRACE_ERROR1("Invalid mdep_role=%d", p_mdep_cfg->mdep_role);
+            status = BT_STATUS_FAIL;
+            break;
+        }
+        else
+        {
+            if (p_cfg->mdep_role == BTA_HL_MDEP_ROLE_SINK )
+                p_sup->app_role_mask |= BTA_HL_MDEP_ROLE_MASK_SINK;
+            else
+                p_sup->app_role_mask |=  BTA_HL_MDEP_ROLE_MASK_SOURCE;
+
+            if ( (p_sup->app_role_mask & BTA_HL_MDEP_ROLE_MASK_SINK) &&
+                 (p_sup->app_role_mask & BTA_HL_MDEP_ROLE_MASK_SINK) )
+            {
+                p_acb->dev_type = BTA_HL_DEVICE_TYPE_DUAL;
+            }
+            else if ( p_sup->app_role_mask & BTA_HL_MDEP_ROLE_MASK_SINK )
+                p_acb->dev_type = BTA_HL_DEVICE_TYPE_SINK;
+            else
+
+                p_acb->dev_type = BTA_HL_DEVICE_TYPE_SOURCE;
+
+            p_data->data_type = (UINT16) p_mdep_cfg->data_type;
+            p_data->max_rx_apdu_size = btif_hl_get_max_rx_apdu_size(p_cfg->mdep_role, p_data->data_type);
+            p_data->max_tx_apdu_size = btif_hl_get_max_tx_apdu_size(p_cfg->mdep_role, p_data->data_type);
+
+            if (p_mdep_cfg->mdep_description != NULL )
+                strncpy(p_data->desp, p_mdep_cfg->mdep_description, BTA_SERVICE_DESP_LEN);
+
+            if ( !btif_hl_get_bta_channel_type(p_mdep_cfg->channel_type, &(p_acb->channel_type[i])))
+            {
+                BTIF_TRACE_ERROR1("Invalid channel_type=%d", p_mdep_cfg->channel_type);
+                status = BT_STATUS_FAIL;
+                break;
+            }
+        }
+    }
+
+    if (status == BT_STATUS_SUCCESS)
+    {
+        *app_id = (int) p_acb->app_id;
+        evt_param.reg.app_idx = app_idx;
+        len = sizeof(btif_hl_reg_t);
+        p_acb->reg_pending = TRUE;
+        BTIF_TRACE_DEBUG2("calling btif_transfer_context status=%d app_id=%d", status, *app_id);
+        status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_REG_APP,
+                                        (char*) &evt_param, len, NULL);
+        ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+
+    }
+    else
+    {
+        btif_hl_free_app_idx(app_idx);
+    }
+
+    BTIF_TRACE_DEBUG2("register_application status=%d app_id=%d", status, *app_id);
+    return status;
+}
+/*******************************************************************************
+**
+** Function         init
+**
+** Description     initializes the hl interface
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static bt_status_t init( bthl_callbacks_t* callbacks ){
+    bt_status_t status = BT_STATUS_SUCCESS;
+
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    btif_hl_display_calling_process_name();
+    bt_hl_callbacks_cb = *callbacks;
+    bt_hl_callbacks = &bt_hl_callbacks_cb;
+    btif_hl_soc_thread_init();
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         cleanup
+**
+** Description      Closes the HL interface
+**
+** Returns          void
+**
+*******************************************************************************/
+static void  cleanup( void ){
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    btif_hl_display_calling_process_name();
+    if (bt_hl_callbacks)
+    {
+        btif_disable_service(BTA_HDP_SERVICE_ID);
+        bt_hl_callbacks = NULL;
+    }
+
+    btif_hl_disable();
+    btif_hl_close_select_thread();
+}
+
+static const bthl_interface_t bthlInterface = {
+    sizeof(bthl_interface_t),
+    init,
+    register_application,
+    unregister_application,
+    connect_channel,
+    destroy_channel,
+    cleanup,
+};
+
+
+/*******************************************************************************
+**
+** Function         btif_hl_get_interface
+**
+** Description      Get the hl callback interface
+**
+** Returns          bthf_interface_t
+**
+*******************************************************************************/
+const bthl_interface_t *btif_hl_get_interface(){
+    BTIF_TRACE_EVENT1("%s", __FUNCTION__);
+    return &bthlInterface;
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_update_maxfd
+**
+** Description Update the max fd if the input fd is greater than the current max fd
+**
+** Returns int
+**
+*******************************************************************************/
+int btif_hl_update_maxfd( int max_org_s){
+    btif_hl_soc_cb_t      *p_scb = NULL;
+    int maxfd=0;
+
+    BTIF_TRACE_DEBUG1("btif_hl_update_maxfd max_org_s= %d", max_org_s);
+
+    maxfd = max_org_s;
+    if (!GKI_queue_is_empty(&soc_queue))
+    {
+        p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+        if (maxfd < p_scb->max_s)
+        {
+            maxfd = p_scb->max_s;
+            BTIF_TRACE_DEBUG1("btif_hl_update_maxfd 1 maxfd=%d", maxfd);
+        }
+        while (p_scb != NULL)
+        {
+            if (maxfd < p_scb->max_s)
+            {
+                maxfd = p_scb->max_s;
+                BTIF_TRACE_DEBUG1("btif_hl_update_maxfd 2 maxfd=%d", maxfd);
+            }
+            p_scb = (btif_hl_soc_cb_t *)GKI_getnext((void *)p_scb );
+        }
+    }
+
+    BTIF_TRACE_DEBUG1("btif_hl_update_maxfd final *p_max_s=%d", maxfd);
+    return maxfd;
+}
+/*******************************************************************************
+**
+** Function btif_hl_get_socket_state
+**
+** Description get socket state
+**
+** Returns btif_hl_soc_state_t
+**
+*******************************************************************************/
+btif_hl_soc_state_t btif_hl_get_socket_state(btif_hl_soc_cb_t *p_scb){
+    BTIF_TRACE_DEBUG1("btif_hl_get_socket_state state=%d", p_scb->state);
+    return p_scb->state;
+}
+/*******************************************************************************
+**
+** Function btif_hl_set_socket_state
+**
+** Description set socket state
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_set_socket_state(btif_hl_soc_cb_t *p_scb, btif_hl_soc_state_t new_state){
+    BTIF_TRACE_DEBUG2("btif_hl_set_socket_state %d---->%d", p_scb->state, new_state);
+    p_scb->state = new_state;
+}
+/*******************************************************************************
+**
+** Function btif_hl_release_mcl_sockets
+**
+** Description Release all sockets on the MCL
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_release_mcl_sockets(UINT8 app_idx, UINT8 mcl_idx){
+    btif_hl_soc_cb_t    *p_scb = NULL;
+    UINT8               i;
+    btif_hl_mdl_cb_t    *p_dcb;
+    BOOLEAN             found= FALSE;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    for (i=0; i < BTA_HL_NUM_MDLS_PER_MCL ; i ++)
+    {
+        p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, i);
+        if (p_dcb && p_dcb->in_use && p_dcb->p_scb)
+        {
+            BTIF_TRACE_DEBUG3("found socket for app_idx=%d mcl_id=%d, mdl_idx=%d", app_idx, mcl_idx, i);
+            btif_hl_set_socket_state (p_dcb->p_scb, BTIF_HL_SOC_STATE_W4_REL);
+            p_dcb->p_scb = NULL;
+            found = TRUE;
+        }
+    }
+    if (found)
+        btif_hl_select_close_connected();
+}
+/*******************************************************************************
+**
+** Function btif_hl_release_socket
+**
+** Description release a specified socket
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_release_socket(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx){
+    btif_hl_soc_cb_t       *p_scb = NULL;
+    btif_hl_mdl_cb_t      *p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    BTIF_TRACE_DEBUG3("app_idx=%d mcl_idx=%d mdl_idx=%d",  app_idx, mcl_idx, mdl_idx  );
+
+    if (p_dcb && p_dcb->p_scb)
+    {
+        p_scb = p_dcb->p_scb;
+        btif_hl_set_socket_state(p_scb,  BTIF_HL_SOC_STATE_W4_REL);
+        p_dcb->p_scb = NULL;
+        btif_hl_select_close_connected();
+    }
+}
+/*******************************************************************************
+**
+** Function btif_hl_create_socket
+**
+** Description create a socket
+**
+** Returns BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_create_socket(UINT8 app_idx, UINT8 mcl_idx, UINT8 mdl_idx){
+    btif_hl_mcl_cb_t      *p_mcb = BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx);
+    btif_hl_mdl_cb_t      *p_dcb = BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx);
+    btif_hl_soc_cb_t      *p_scb = NULL;
+    UINT8                 soc_idx;
+    BOOLEAN               status = FALSE;
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (p_dcb && ((p_scb = (btif_hl_soc_cb_t *)GKI_getbuf((UINT16)sizeof(btif_hl_soc_cb_t)))!=NULL))
+    {
+        if (socketpair(AF_UNIX, SOCK_STREAM, 0, p_scb->socket_id) >= 0)
+        {
+            BTIF_TRACE_DEBUG2("socket id[0]=%d id[1]=%d",p_scb->socket_id[0], p_scb->socket_id[1] );
+            p_dcb->p_scb = p_scb;
+            p_scb->app_idx = app_idx;
+            p_scb->mcl_idx = mcl_idx;
+            p_scb->mdl_idx = mdl_idx;
+            p_scb->channel_id = p_dcb->channel_id;
+            p_scb->mdep_cfg_idx = p_dcb->local_mdep_cfg_idx;
+            memcpy(p_scb->bd_addr, p_mcb->bd_addr,sizeof(BD_ADDR));
+            btif_hl_set_socket_state(p_scb,  BTIF_HL_SOC_STATE_W4_ADD);
+            p_scb->max_s = p_scb->socket_id[1];
+            GKI_enqueue(&soc_queue, (void *) p_scb);
+            btif_hl_select_wakeup();
+            status = TRUE;
+        }
+        else
+        {
+
+            btif_hl_free_buf((void **)&p_scb);
+        }
+    }
+
+    BTIF_TRACE_DEBUG2("%s status=%d", __FUNCTION__, status);
+    return status;
+}
+/*******************************************************************************
+**
+** Function btif_hl_add_socket_to_set
+**
+** Description Add a socket
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_add_socket_to_set( fd_set *p_org_set){
+    btif_hl_soc_cb_t                *p_scb = NULL;
+    btif_hl_mdl_cb_t                *p_dcb = NULL;
+    btif_hl_mcl_cb_t                *p_mcb = NULL;
+    btif_hl_evt_cb_t                evt_param;
+    bt_status_t                     status;
+    int                             len;
+
+    BTIF_TRACE_DEBUG1("entering %s",__FUNCTION__);
+
+    if (!GKI_queue_is_empty(&soc_queue))
+    {
+        p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+        BTIF_TRACE_DEBUG1("btif_hl_add_socket_to_set first p_scb=0x%x", p_scb);
+        while (p_scb != NULL)
+        {
+            if (btif_hl_get_socket_state(p_scb) == BTIF_HL_SOC_STATE_W4_ADD)
+            {
+                btif_hl_set_socket_state(p_scb,   BTIF_HL_SOC_STATE_W4_READ);
+                FD_SET(p_scb->socket_id[1], p_org_set);
+                BTIF_TRACE_DEBUG2("found and set socket_id=%d is_set=%d", p_scb->socket_id[1], FD_ISSET(p_scb->socket_id[1], p_org_set));
+                p_mcb = BTIF_HL_GET_MCL_CB_PTR(p_scb->app_idx, p_scb->mcl_idx);
+                p_dcb = BTIF_HL_GET_MDL_CB_PTR(p_scb->app_idx, p_scb->mcl_idx, p_scb->mdl_idx);
+                if (p_mcb && p_dcb)
+                {
+                    btif_hl_stop_cch_timer(p_scb->app_idx, p_scb->mcl_idx);
+                    evt_param.chan_cb.app_id = (int) btif_hl_get_app_id(p_dcb->channel_id);
+                    memcpy(evt_param.chan_cb.bd_addr, p_mcb->bd_addr, sizeof(BD_ADDR));
+                    evt_param.chan_cb.channel_id = p_dcb->channel_id;
+                    evt_param.chan_cb.fd = p_scb->socket_id[0];
+                    evt_param.chan_cb.mdep_cfg_index = (int ) p_dcb->local_mdep_cfg_idx;
+                    evt_param.chan_cb.cb_state = BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING;
+                    len = sizeof(btif_hl_send_chan_state_cb_t);
+                    status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_SEND_CONNECTED_CB,
+                                                    (char*) &evt_param, len, NULL);
+                    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+                }
+            }
+            p_scb = (btif_hl_soc_cb_t *)GKI_getnext((void *)p_scb );
+            BTIF_TRACE_DEBUG1("next p_scb=0x%x", p_scb);
+        }
+    }
+
+    BTIF_TRACE_DEBUG1("leaving %s",__FUNCTION__);
+}
+/*******************************************************************************
+**
+** Function btif_hl_close_socket
+**
+** Description close a socket
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_close_socket( fd_set *p_org_set){
+    btif_hl_soc_cb_t                *p_scb = NULL;
+    BOOLEAN                         element_removed = FALSE;
+    btif_hl_mdl_cb_t                *p_dcb = NULL ;
+    btif_hl_evt_cb_t                evt_param;
+    int                             len;
+    bt_status_t                     status;
+
+    BTIF_TRACE_DEBUG1("entering %s",__FUNCTION__);
+    if (!GKI_queue_is_empty(&soc_queue))
+    {
+        p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+        while (p_scb != NULL)
+        {
+            if (btif_hl_get_socket_state(p_scb) == BTIF_HL_SOC_STATE_W4_REL)
+            {
+                BTIF_TRACE_DEBUG3("app_idx=%d mcl_id=%d, mdl_idx=%d",
+                                  p_scb->app_idx, p_scb->mcl_idx, p_scb->mdl_idx);
+                btif_hl_set_socket_state(p_scb,   BTIF_HL_SOC_STATE_IDLE);
+                if (p_scb->socket_id[1] != -1)
+                {
+                    FD_CLR(p_scb->socket_id[1] , p_org_set);
+                    shutdown(p_scb->socket_id[1], SHUT_RDWR);
+                    close(p_scb->socket_id[1]);
+
+                    evt_param.chan_cb.app_id = (int) btif_hl_get_app_id(p_scb->channel_id);
+                    memcpy(evt_param.chan_cb.bd_addr, p_scb->bd_addr, sizeof(BD_ADDR));
+                    evt_param.chan_cb.channel_id = p_scb->channel_id;
+                    evt_param.chan_cb.fd = p_scb->socket_id[0];
+                    evt_param.chan_cb.mdep_cfg_index = (int ) p_scb->mdep_cfg_idx;
+                    evt_param.chan_cb.cb_state = BTIF_HL_CHAN_CB_STATE_DISCONNECTED_PENDING;
+                    len = sizeof(btif_hl_send_chan_state_cb_t);
+                    status = btif_transfer_context (btif_hl_proc_cb_evt, BTIF_HL_SEND_DISCONNECTED_CB,
+                                                    (char*) &evt_param, len, NULL);
+                    ASSERTC(status == BT_STATUS_SUCCESS, "context transfer failed", status);
+
+
+
+                }
+            }
+            p_scb = (btif_hl_soc_cb_t *)GKI_getnext((void *)p_scb );
+            BTIF_TRACE_DEBUG1("while loop next p_scb=0x%x", p_scb);
+        }
+
+        p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+        while (p_scb != NULL)
+        {
+            if (btif_hl_get_socket_state(p_scb) == BTIF_HL_SOC_STATE_IDLE)
+            {
+                p_dcb = BTIF_HL_GET_MDL_CB_PTR(p_scb->app_idx, p_scb->mcl_idx, p_scb->mdl_idx);
+                BTIF_TRACE_DEBUG4("idle socket app_idx=%d mcl_id=%d, mdl_idx=%d p_dcb->in_use=%d",
+                                  p_scb->app_idx, p_scb->mcl_idx, p_scb->mdl_idx, p_dcb->in_use);
+                GKI_remove_from_queue((void *)&soc_queue, p_scb);
+                btif_hl_free_buf((void **)&p_scb);
+                p_dcb->p_scb = NULL;
+                element_removed = TRUE;
+            }
+            BTIF_TRACE_DEBUG2("element_removed=%d p_scb=0x%x", element_removed, p_scb);
+            if (element_removed)
+            {
+                element_removed = FALSE;
+                p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+            }
+            else
+                p_scb = (btif_hl_soc_cb_t *)GKI_getnext((void *)p_scb );
+
+            BTIF_TRACE_DEBUG1("while loop p_scb=0x%x", p_scb);
+        }
+    }
+    BTIF_TRACE_DEBUG1("leaving %s",__FUNCTION__);
+}
+/*******************************************************************************
+**
+** Function btif_hl_select_wakeup_callback
+**
+** Description Select wakup callback to add or close a socket
+**
+** Returns void
+**
+*******************************************************************************/
+
+void btif_hl_select_wakeup_callback( fd_set *p_org_set ,  int wakeup_signal){
+    BTIF_TRACE_DEBUG2("entering %s wakeup_signal=0x%04x",__FUNCTION__, wakeup_signal);
+
+    if (wakeup_signal == btif_hl_signal_select_wakeup )
+    {
+        btif_hl_add_socket_to_set(p_org_set);
+    }
+    else if (wakeup_signal == btif_hl_signal_select_close_connected)
+    {
+        btif_hl_close_socket(p_org_set);
+    }
+    BTIF_TRACE_DEBUG1("leaving %s",__FUNCTION__);
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_select_monitor_callback
+**
+** Description Select monitor callback to check pending socket actions
+**
+** Returns void
+**
+*******************************************************************************/
+void btif_hl_select_monitor_callback( fd_set *p_cur_set , fd_set *p_org_set){
+    btif_hl_soc_cb_t      *p_scb = NULL;
+    btif_hl_mdl_cb_t      *p_dcb = NULL;
+    int r;
+
+    BTIF_TRACE_DEBUG1("entering %s",__FUNCTION__);
+
+    if (!GKI_queue_is_empty(&soc_queue))
+    {
+        p_scb = (btif_hl_soc_cb_t *)GKI_getfirst((void *)&soc_queue);
+        BTIF_TRACE_DEBUG0(" GKI queue is not empty ");
+        while (p_scb != NULL)
+        {
+            if (btif_hl_get_socket_state(p_scb) == BTIF_HL_SOC_STATE_W4_READ)
+            {
+                if (FD_ISSET(p_scb->socket_id[1], p_cur_set))
+                {
+                    BTIF_TRACE_DEBUG0("read data");
+                    BTIF_TRACE_DEBUG0("state= BTIF_HL_SOC_STATE_W4_READ");
+                    p_dcb = BTIF_HL_GET_MDL_CB_PTR(p_scb->app_idx, p_scb->mcl_idx, p_scb->mdl_idx);
+                    if (p_dcb->p_tx_pkt)
+                    {
+                        BTIF_TRACE_ERROR1("Rcv new pkt but the last pkt is still not been sent tx_size=%d", p_dcb->tx_size);
+                        btif_hl_free_buf((void **) &p_dcb->p_tx_pkt);
+                    }
+                    p_dcb->p_tx_pkt =  btif_hl_get_buf (p_dcb->mtu);
+                    if (p_dcb )
+                    {
+                        //do
+                        // {
+                        //     r = recv(p_scb->socket_id[1], p_dcb->p_tx_pkt, p_dcb->mtu , MSG_DONTWAIT));
+                        // } while (r == SOCKET_ERROR && errno == EINTR);
+
+                        if ((r = (int)recv(p_scb->socket_id[1], p_dcb->p_tx_pkt, p_dcb->mtu , MSG_DONTWAIT)) > 0)
+                        {
+                            BTIF_TRACE_DEBUG1("btif_hl_select_monitor_callback send data r =%d", r);
+                            p_dcb->tx_size = r;
+                            BTIF_TRACE_DEBUG1("btif_hl_select_monitor_callback send data tx_size=%d", p_dcb->tx_size );
+                            BTA_HlSendData(p_dcb->mdl_handle, p_dcb->tx_size  );
+                        }
+
+                        if (r <= 0 )
+                        {
+                            BTIF_TRACE_DEBUG1("btif_hl_select_monitor_callback  receive failed r=%d",r);
+                            BTA_HlDchClose(p_dcb->mdl_handle );
+                        }
+                    }
+                }
+            }
+            p_scb = (btif_hl_soc_cb_t *)GKI_getnext((void *)p_scb );
+        }
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG0("btif_hl_select_monitor_queue is empty");
+    }
+    BTIF_TRACE_DEBUG1("leaving %s",__FUNCTION__);
+}
+/*******************************************************************************
+**
+** Function btif_hl_select_wakeup_init
+**
+** Description select loop wakup init
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_select_wakeup_init(fd_set* set){
+    BTIF_TRACE_DEBUG0("btif_hl_select_wakeup_init");
+    if (socketpair(AF_UNIX, SOCK_STREAM, 0, signal_fds) < 0)
+    {
+        BTIF_TRACE_ERROR1("socketpair failed: %s", strerror(errno));
+        return -1;
+    }
+
+    BTIF_TRACE_DEBUG2("btif_hl_select_wakeup_init signal_fds[0]=%d signal_fds[1]=%d",signal_fds[0], signal_fds[1] );
+    FD_SET(signal_fds[0], set);
+
+    return signal_fds[0];
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_select_wakeup
+**
+** Description send a signal to wakupo the select loop
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_select_wakeup(void){
+    char sig_on = btif_hl_signal_select_wakeup;
+    BTIF_TRACE_DEBUG0("btif_hl_select_wakeup");
+    return send(signal_fds[1], &sig_on, sizeof(sig_on), 0);
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_select_close_connected
+**
+** Description send a signal to close a socket
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_select_close_connected(void){
+    char sig_on = btif_hl_signal_select_close_connected;
+    BTIF_TRACE_DEBUG0("btif_hl_select_close_connected");
+    return send(signal_fds[1], &sig_on, sizeof(sig_on), 0);
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_close_select_thread
+**
+** Description send signal to close the thread and then close all signal FDs
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_close_select_thread(void)
+{
+    int result = 0;
+    char sig_on = btif_hl_signal_select_exit;
+    BTIF_TRACE_DEBUG0("btif_hl_signal_select_exit");
+    result = send(signal_fds[1], &sig_on, sizeof(sig_on), 0);
+    /* Wait for the select_thread_id to exit */
+    if (select_thread_id != -1) {
+        pthread_join(select_thread_id, NULL);
+        select_thread_id = -1;
+    }
+   /* Cleanup signal sockets */
+    if(signal_fds[0] != -1)
+    {
+        close(signal_fds[0]);
+        signal_fds[0] = -1;
+    }
+    if(signal_fds[1] != -1)
+    {
+        close(signal_fds[1]);
+        signal_fds[1] = -1;
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function btif_hl_select_wake_reset
+**
+** Description clear the received signal for the select loop
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_select_wake_reset(void){
+    char sig_recv = 0;
+
+    BTIF_TRACE_DEBUG0("btif_hl_select_wake_reset");
+    recv(signal_fds[0], &sig_recv, sizeof(sig_recv), MSG_WAITALL);
+    return(int)sig_recv;
+}
+/*******************************************************************************
+**
+** Function btif_hl_select_wake_signaled
+**
+** Description check whether a fd is set or not
+**
+** Returns int
+**
+*******************************************************************************/
+static inline int btif_hl_select_wake_signaled(fd_set* set){
+    BTIF_TRACE_DEBUG0("btif_hl_select_wake_signaled");
+    return FD_ISSET(signal_fds[0], set);
+}
+/*******************************************************************************
+**
+** Function btif_hl_thread_cleanup
+**
+** Description  shut down and clean up the select loop
+**
+** Returns void
+**
+*******************************************************************************/
+static void btif_hl_thread_cleanup(){
+    if (listen_s != -1)
+        close(listen_s);
+    if (connected_s != -1)
+    {
+        shutdown(connected_s, SHUT_RDWR);
+        close(connected_s);
+    }
+    listen_s = connected_s = -1;
+    BTIF_TRACE_DEBUG0("hl thread cleanup");
+}
+/*******************************************************************************
+**
+** Function btif_hl_select_thread
+**
+** Description the select loop
+**
+** Returns void
+**
+*******************************************************************************/
+static void *btif_hl_select_thread(void *arg){
+    fd_set org_set, curr_set;
+    int r, max_curr_s, max_org_s;
+
+    BTIF_TRACE_DEBUG0("entered btif_hl_select_thread");
+    FD_ZERO(&org_set);
+    max_org_s = btif_hl_select_wakeup_init(&org_set);
+    BTIF_TRACE_DEBUG1("max_s=%d ", max_org_s);
+
+    for (;;)
+    {
+        r = 0;
+        BTIF_TRACE_DEBUG0("set curr_set = org_set ");
+        curr_set = org_set;
+        max_curr_s = max_org_s;
+        int ret = select((max_curr_s + 1), &curr_set, NULL, NULL, NULL);
+        BTIF_TRACE_DEBUG1("select unblocked ret=%d", ret);
+        if (ret == -1)
+        {
+            BTIF_TRACE_DEBUG0("select() ret -1, exit the thread");
+            btif_hl_thread_cleanup();
+            select_thread_id = -1;
+            return 0;
+        }
+        else if (ret)
+        {
+            BTIF_TRACE_DEBUG1("btif_hl_select_wake_signaled, signal ret=%d", ret);
+            if (btif_hl_select_wake_signaled(&curr_set))
+            {
+                r = btif_hl_select_wake_reset();
+                BTIF_TRACE_DEBUG1("btif_hl_select_wake_signaled, signal:%d", r);
+                if (r == btif_hl_signal_select_wakeup || r == btif_hl_signal_select_close_connected )
+                {
+                    btif_hl_select_wakeup_callback(&org_set, r);
+                }
+                else if( r == btif_hl_signal_select_exit)
+                {
+                    btif_hl_thread_cleanup();
+                    BTIF_TRACE_DEBUG0("Exit hl_select_thread for btif_hl_signal_select_exit");
+                    return 0;
+                }
+            }
+
+            btif_hl_select_monitor_callback(&curr_set, &org_set);
+            max_org_s = btif_hl_update_maxfd(max_org_s);
+        }
+        else
+            BTIF_TRACE_DEBUG1("no data, select ret: %d\n", ret);
+    }
+    BTIF_TRACE_DEBUG0("leaving hl_select_thread");
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function create_thread
+**
+** Description creat a select loop
+**
+** Returns pthread_t
+**
+*******************************************************************************/
+static inline pthread_t create_thread(void *(*start_routine)(void *), void * arg){
+    BTIF_TRACE_DEBUG0("create_thread: entered");
+    pthread_attr_t thread_attr;
+
+    pthread_attr_init(&thread_attr);
+    pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_JOINABLE);
+    pthread_t thread_id = -1;
+    if ( pthread_create(&thread_id, &thread_attr, start_routine, arg)!=0 )
+    {
+        BTIF_TRACE_ERROR1("pthread_create : %s", strerror(errno));
+        return -1;
+    }
+    BTIF_TRACE_DEBUG0("create_thread: thread created successfully");
+    return thread_id;
+}
+
+/*******************************************************************************
+**
+** Function         btif_hl_soc_thread_init
+**
+** Description      HL select loop init function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btif_hl_soc_thread_init(void){
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    GKI_init_q(&soc_queue);
+    select_thread_id = create_thread(btif_hl_select_thread, NULL);
+}
+/*******************************************************************************
+**
+** Function btif_hl_load_mdl_config
+**
+** Description load the MDL configuation from the application control block
+**
+** Returns BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btif_hl_load_mdl_config (UINT8 app_id, UINT8 buffer_size,
+                                 tBTA_HL_MDL_CFG *p_mdl_buf ){
+    UINT8 app_idx;
+    BOOLEAN result = FALSE;
+    btif_hl_app_cb_t          *p_acb;
+    tBTA_HL_MDL_CFG *p;
+    int i;
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (btif_hl_find_app_idx(app_id, &app_idx))
+    {
+        p_acb  = BTIF_HL_GET_APP_CB_PTR(app_idx);
+        for (i=0, p=p_mdl_buf; i<buffer_size; i++, p++)
+        {
+            memcpy(p, &p_acb->mdl_cfg[i].base, sizeof(tBTA_HL_MDL_CFG));
+        }
+        result = TRUE;
+    }
+
+    BTIF_TRACE_DEBUG1("result=%d", result);
+    return result;
+}
diff --git a/btif/src/btif_media_task.c b/btif/src/btif_media_task.c
new file mode 100755
index 0000000..8978cf6
--- /dev/null
+++ b/btif/src/btif_media_task.c
@@ -0,0 +1,2287 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ **
+ **  Name:          btif_media_task.c
+ **
+ **  Description:   This is the multimedia module for the BTIF system.  It
+ **                 contains task implementations AV, HS and HF profiles
+ **                 audio & video processing
+ **
+ ******************************************************************************/
+
+#include <string.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <stdint.h>
+#include <sys/time.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "bta_api.h"
+#include "btu.h"
+#include "bta_sys.h"
+#include "bta_sys_int.h"
+
+#include "bta_av_api.h"
+#include "a2d_api.h"
+#include "a2d_sbc.h"
+#include "a2d_int.h"
+#include "bta_av_sbc.h"
+#include "bta_av_ci.h"
+#include "l2c_api.h"
+
+
+#include "btif_av_co.h"
+#include "btif_media.h"
+
+
+#if (BTA_AV_INCLUDED == TRUE)
+#include "sbc_encoder.h"
+#endif
+
+#define LOG_TAG "BTIF-MEDIA"
+
+#include <hardware/bluetooth.h>
+#include "audio_a2dp_hw.h"
+#include "btif_av.h"
+#include "btif_sm.h"
+#include "btif_util.h"
+#include "bt_utils.h"
+
+/*****************************************************************************
+ **  Constants
+ *****************************************************************************/
+
+//#define DEBUG_MEDIA_AV_FLOW TRUE
+
+/* BTIF media task gki event definition */
+#define BTIF_MEDIA_TASK_CMD TASK_MBOX_0_EVT_MASK
+#define BTIF_MEDIA_TASK_DATA TASK_MBOX_1_EVT_MASK
+
+#define BTIF_MEDIA_TASK_KILL EVENT_MASK(GKI_SHUTDOWN_EVT)
+
+#define BTIF_MEDIA_AA_TASK_TIMER_ID TIMER_0
+#define BTIF_MEDIA_AV_TASK_TIMER_ID TIMER_1
+#define BTIF_MEDIA_AA_TASK_TIMER TIMER_0_EVT_MASK
+#define BTIF_MEDIA_AV_TASK_TIMER TIMER_1_EVT_MASK
+
+#define BTIF_MEDIA_TASK_CMD_MBOX        TASK_MBOX_0     /* cmd mailbox  */
+#define BTIF_MEDIA_TASK_DATA_MBOX       TASK_MBOX_1     /* data mailbox  */
+
+/* BTIF media cmd event definition : BTIF_MEDIA_TASK_CMD */
+enum
+{
+    BTIF_MEDIA_START_AA_TX = 1,
+    BTIF_MEDIA_STOP_AA_TX,
+    BTIF_MEDIA_AA_RX_RDY,
+    BTIF_MEDIA_UIPC_RX_RDY,
+    BTIF_MEDIA_SBC_ENC_INIT,
+    BTIF_MEDIA_SBC_ENC_UPDATE,
+    BTIF_MEDIA_SBC_DEC_INIT,
+    BTIF_MEDIA_VIDEO_DEC_INIT,
+    BTIF_MEDIA_FLUSH_AA_TX,
+    BTIF_MEDIA_FLUSH_AA_RX,
+    BTIF_MEDIA_AUDIO_FEEDING_INIT,
+    BTIF_MEDIA_AUDIO_RECEIVING_INIT
+};
+
+enum {
+    MEDIA_TASK_STATE_OFF = 0,
+    MEDIA_TASK_STATE_ON = 1,
+    MEDIA_TASK_STATE_SHUTTING_DOWN = 2
+};
+
+/* Macro to multiply the media task tick */
+#ifndef BTIF_MEDIA_NUM_TICK
+#define BTIF_MEDIA_NUM_TICK      1
+#endif
+
+/* Media task tick in milliseconds */
+#define BTIF_MEDIA_TIME_TICK                     (20 * BTIF_MEDIA_NUM_TICK)
+
+/* Number of frames per media task tick.
+   Configure value rounded up to closest integer and
+   adjust any deltas in btif_get_num_aa_frame */
+
+/* 7.5 frames/tick @ 20 ms tick (every 2nd frame send one less) */
+#define BTIF_MEDIA_FR_PER_TICKS_48               (8 * BTIF_MEDIA_NUM_TICK)
+
+/* 6.89 frames/tick  @ 20 ms tick (7 out of 64 frames send one less */
+#define BTIF_MEDIA_FR_PER_TICKS_44_1             (7 * BTIF_MEDIA_NUM_TICK)
+
+/* 5.0 frames/tick  @ 20 ms tick */
+#define BTIF_MEDIA_FR_PER_TICKS_32               (5 * BTIF_MEDIA_NUM_TICK)
+
+/* 2.5 frames/tick  @ 20 ms tick (every 2nd frame send one less) */
+#define BTIF_MEDIA_FR_PER_TICKS_16               (3 * BTIF_MEDIA_NUM_TICK)
+
+
+/* buffer pool */
+#define BTIF_MEDIA_AA_POOL_ID GKI_POOL_ID_3
+#define BTIF_MEDIA_AA_BUF_SIZE GKI_BUF3_SIZE
+
+/* offset */
+#if (BTA_AV_CO_CP_SCMS_T == TRUE)
+#define BTIF_MEDIA_AA_SBC_OFFSET (AVDT_MEDIA_OFFSET + BTA_AV_SBC_HDR_SIZE + 1)
+#else
+#define BTIF_MEDIA_AA_SBC_OFFSET (AVDT_MEDIA_OFFSET + BTA_AV_SBC_HDR_SIZE)
+#endif
+
+/* Define the bitrate step when trying to match bitpool value */
+#ifndef BTIF_MEDIA_BITRATE_STEP
+#define BTIF_MEDIA_BITRATE_STEP 5
+#endif
+
+/* Middle quality quality setting @ 44.1 khz */
+#define DEFAULT_SBC_BITRATE 229
+
+#ifndef A2DP_MEDIA_TASK_STACK_SIZE
+#define A2DP_MEDIA_TASK_STACK_SIZE       0x2000         /* In bytes */
+#endif
+
+#define A2DP_MEDIA_TASK_TASK_STR        ((INT8 *) "A2DP-MEDIA")
+static UINT32 a2dp_media_task_stack[(A2DP_MEDIA_TASK_STACK_SIZE + 3) / 4];
+
+#define BT_MEDIA_TASK A2DP_MEDIA_TASK
+
+#define USEC_PER_SEC 1000000L
+#define TPUT_STATS_INTERVAL_US (1000*1000)
+
+/*
+ * CONGESTION COMPENSATION CTRL ::
+ *
+ * Thus setting controls how many buffers we will hold in media task
+ * during temp link congestion. Together with the stack buffer queues
+ * it controls much temporary a2dp link congestion we can
+ * compensate for. It however also depends on the default run level of sinks
+ * jitterbuffers. Depending on type of sink this would vary.
+ * Ideally the (SRC) max tx buffer capacity should equal the sinks
+ * jitterbuffer runlevel including any intermediate buffers on the way
+ * towards the sinks codec.
+ */
+
+/* fixme -- define this in pcm time instead of buffer count */
+/* fixme -- tune optimal value. For now set a large buffer capacity */
+#define MAX_OUTPUT_BUFFER_QUEUE_SZ 24
+
+//#define BTIF_MEDIA_VERBOSE_ENABLED
+
+#ifdef BTIF_MEDIA_VERBOSE_ENABLED
+#define VERBOSE(fmt, ...) \
+      LogMsg( TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | \
+              TRACE_TYPE_ERROR, fmt, ## __VA_ARGS__)
+#else
+#define VERBOSE(fmt, ...)
+#endif
+
+/*****************************************************************************
+ **  Data types
+ *****************************************************************************/
+
+typedef struct
+{
+    UINT32 aa_frame_counter;
+    INT32  aa_feed_counter;
+    INT32  aa_feed_residue;
+} tBTIF_AV_MEDIA_FEEDINGS_PCM_STATE;
+
+
+typedef union
+{
+    tBTIF_AV_MEDIA_FEEDINGS_PCM_STATE pcm;
+} tBTIF_AV_MEDIA_FEEDINGS_STATE;
+
+typedef struct
+{
+#if (BTA_AV_INCLUDED == TRUE)
+    BUFFER_Q TxAaQ;
+    BOOLEAN is_tx_timer;
+    UINT16 TxAaMtuSize;
+    UINT32 timestamp;
+    UINT8 TxTranscoding;
+    tBTIF_AV_FEEDING_MODE feeding_mode;
+    tBTIF_AV_MEDIA_FEEDINGS media_feeding;
+    tBTIF_AV_MEDIA_FEEDINGS_STATE media_feeding_state;
+    SBC_ENC_PARAMS encoder;
+    UINT8 busy_level;
+    void* av_sm_hdl;
+    UINT8 a2dp_cmd_pending; /* we can have max one command pending */
+    BOOLEAN tx_flush; /* discards any outgoing data when true */
+    BOOLEAN scaling_disabled;
+#endif
+
+} tBTIF_MEDIA_CB;
+
+typedef struct {
+    int rx;
+    int rx_tot;
+    int tx;
+    int tx_tot;
+    int ts_prev_us;
+} t_stat;
+
+/*****************************************************************************
+ **  Local data
+ *****************************************************************************/
+
+static tBTIF_MEDIA_CB btif_media_cb;
+static int media_task_running = MEDIA_TASK_STATE_OFF;
+
+
+/*****************************************************************************
+ **  Local functions
+ *****************************************************************************/
+
+static void btif_a2dp_data_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event);
+static void btif_a2dp_ctrl_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event);
+static void btif_a2dp_encoder_update(void);
+
+/*****************************************************************************
+ **  Externs
+ *****************************************************************************/
+
+static void btif_media_task_handle_cmd(BT_HDR *p_msg);
+static void btif_media_task_handle_media(BT_HDR *p_msg);
+
+#if (BTA_AV_INCLUDED == TRUE)
+static void btif_media_send_aa_frame(void);
+static void btif_media_task_feeding_state_reset(void);
+static void btif_media_task_aa_start_tx(void);
+static void btif_media_task_aa_stop_tx(void);
+static void btif_media_task_enc_init(BT_HDR *p_msg);
+static void btif_media_task_enc_update(BT_HDR *p_msg);
+static void btif_media_task_audio_feeding_init(BT_HDR *p_msg);
+static void btif_media_task_aa_tx_flush(BT_HDR *p_msg);
+static void btif_media_aa_prep_2_send(UINT8 nb_frame);
+#endif
+
+
+/*****************************************************************************
+ **  Misc helper functions
+ *****************************************************************************/
+
+static void tput_mon(int is_rx, int len, int reset)
+{
+    /* only monitor one connection at a time for now */
+    static t_stat cur_stat;
+    struct timespec now;
+    unsigned int prev_us;
+    unsigned int now_us;
+
+    if (reset == TRUE)
+    {
+        memset(&cur_stat, 0, sizeof(t_stat));
+        return;
+    }
+
+    if (is_rx)
+    {
+        cur_stat.rx+=len;
+        cur_stat.rx_tot+=len;
+    }
+    else
+    {
+        cur_stat.tx+=len;
+        cur_stat.tx_tot+=len;
+    }
+    clock_gettime(CLOCK_MONOTONIC, &now);
+
+    now_us = now.tv_sec*USEC_PER_SEC + now.tv_nsec/1000;
+
+    //APPL_TRACE_DEBUG1("%d us", now_us - cur_stat.ts_prev_us);
+
+    if ((now_us - cur_stat.ts_prev_us) < TPUT_STATS_INTERVAL_US)
+        return;
+
+    APPL_TRACE_WARNING4("tput rx:%d, tx:%d (kB/s)  (tot : rx %d, tx %d bytes)",
+          (cur_stat.rx)/((now_us - cur_stat.ts_prev_us)/1000),
+          (cur_stat.tx)/((now_us - cur_stat.ts_prev_us)/1000),
+           cur_stat.rx_tot, cur_stat.tx_tot);
+
+    /* stats dumped. now reset stats for next interval */
+    cur_stat.rx = 0;
+    cur_stat.tx = 0;
+    cur_stat.ts_prev_us = now_us;
+}
+
+
+static void log_tstamps_us(char *comment)
+{
+    #define USEC_PER_SEC 1000000L
+    static struct timespec prev = {0, 0};
+    struct timespec now, diff;
+    unsigned int diff_us = 0;
+    unsigned int now_us = 0;
+
+    clock_gettime(CLOCK_MONOTONIC, &now);
+    now_us = now.tv_sec*USEC_PER_SEC + now.tv_nsec/1000;
+    diff_us = (now.tv_sec - prev.tv_sec) * USEC_PER_SEC + (now.tv_nsec - prev.tv_nsec)/1000;
+
+    APPL_TRACE_DEBUG4("[%s] ts %08d, diff : %08d, queue sz %d", comment, now_us, diff_us,
+                btif_media_cb.TxAaQ.count);
+
+    prev = now;
+}
+
+const char* dump_media_event(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTIF_MEDIA_START_AA_TX)
+        CASE_RETURN_STR(BTIF_MEDIA_STOP_AA_TX)
+        CASE_RETURN_STR(BTIF_MEDIA_AA_RX_RDY)
+        CASE_RETURN_STR(BTIF_MEDIA_UIPC_RX_RDY)
+        CASE_RETURN_STR(BTIF_MEDIA_SBC_ENC_INIT)
+        CASE_RETURN_STR(BTIF_MEDIA_SBC_ENC_UPDATE)
+        CASE_RETURN_STR(BTIF_MEDIA_SBC_DEC_INIT)
+        CASE_RETURN_STR(BTIF_MEDIA_VIDEO_DEC_INIT)
+        CASE_RETURN_STR(BTIF_MEDIA_FLUSH_AA_TX)
+        CASE_RETURN_STR(BTIF_MEDIA_FLUSH_AA_RX)
+        CASE_RETURN_STR(BTIF_MEDIA_AUDIO_FEEDING_INIT)
+        CASE_RETURN_STR(BTIF_MEDIA_AUDIO_RECEIVING_INIT)
+
+        default:
+            return "UNKNOWN MEDIA EVENT";
+    }
+}
+
+/*****************************************************************************
+ **  A2DP CTRL PATH
+ *****************************************************************************/
+
+static const char* dump_a2dp_ctrl_event(UINT8 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(A2DP_CTRL_CMD_NONE)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_CHECK_READY)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_START)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_STOP)
+        CASE_RETURN_STR(A2DP_CTRL_CMD_SUSPEND)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+static void btif_audiopath_detached(void)
+{
+    APPL_TRACE_EVENT0("## AUDIO PATH DETACHED ##");
+
+    /*  send stop request only if we are actively streaming and haven't received
+        a stop request. Potentially audioflinger detached abnormally */
+    if (btif_media_cb.is_tx_timer)
+    {
+        /* post stop event and wait for audio path to stop */
+        btif_dispatch_sm_event(BTIF_AV_STOP_STREAM_REQ_EVT, NULL, 0);
+    }
+}
+
+static void a2dp_cmd_acknowledge(int status)
+{
+    UINT8 ack = status;
+
+    APPL_TRACE_EVENT2("## a2dp ack : %s, status %d ##", dump_a2dp_ctrl_event(btif_media_cb.a2dp_cmd_pending), status);
+
+    /* sanity check */
+    if (btif_media_cb.a2dp_cmd_pending == A2DP_CTRL_CMD_NONE)
+    {
+        APPL_TRACE_ERROR0("warning : no command pending, ignore ack");
+        return;
+    }
+
+    /* clear pending */
+    btif_media_cb.a2dp_cmd_pending = A2DP_CTRL_CMD_NONE;
+
+    /* acknowledge start request */
+    UIPC_Send(UIPC_CH_ID_AV_CTRL, 0, &ack, 1);
+}
+
+
+static void btif_recv_ctrl_data(void)
+{
+    UINT8 cmd = 0;
+    int n;
+
+    n = UIPC_Read(UIPC_CH_ID_AV_CTRL, NULL, &cmd, 1);
+
+    /* detach on ctrl channel means audioflinger process was terminated */
+    if (n == 0)
+    {
+        APPL_TRACE_EVENT0("CTRL CH DETACHED");
+        UIPC_Close(UIPC_CH_ID_AV_CTRL);
+        /* we can operate only on datachannel, if af client wants to
+           do send additional commands the ctrl channel would be reestablished */
+        //btif_audiopath_detached();
+        return;
+    }
+
+    APPL_TRACE_DEBUG1("a2dp-ctrl-cmd : %s", dump_a2dp_ctrl_event(cmd));
+
+    btif_media_cb.a2dp_cmd_pending = cmd;
+
+    switch(cmd)
+    {
+        case A2DP_CTRL_CMD_CHECK_READY:
+
+            if (media_task_running == MEDIA_TASK_STATE_SHUTTING_DOWN)
+            {
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+                return;
+            }
+
+            /* check whether av is ready to setup a2dp datapath */
+            if ((btif_av_stream_ready() == TRUE) || (btif_av_stream_started_ready() == TRUE))
+            {
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+            }
+            else
+            {
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+            }
+            break;
+
+        case A2DP_CTRL_CMD_START:
+
+            if (btif_av_stream_ready() == TRUE)
+            {
+                /* setup audio data channel listener */
+                UIPC_Open(UIPC_CH_ID_AV_AUDIO, btif_a2dp_data_cb);
+
+                /* post start event and wait for audio path to open */
+                btif_dispatch_sm_event(BTIF_AV_START_STREAM_REQ_EVT, NULL, 0);
+            }
+            else if (btif_av_stream_started_ready())
+            {
+                /* already started, setup audio data channel listener
+                   and ack back immediately */
+                UIPC_Open(UIPC_CH_ID_AV_AUDIO, btif_a2dp_data_cb);
+
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+            }
+            else
+            {
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+                break;
+            }
+            break;
+
+        case A2DP_CTRL_CMD_STOP:
+
+            if (btif_media_cb.is_tx_timer == FALSE)
+            {
+                /* we are already stopped, just ack back */
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+                break;
+            }
+
+            btif_dispatch_sm_event(BTIF_AV_STOP_STREAM_REQ_EVT, NULL, 0);
+            break;
+
+        case A2DP_CTRL_CMD_SUSPEND:
+            /* local suspend */
+            if (btif_av_stream_started_ready())
+            {
+                btif_dispatch_sm_event(BTIF_AV_SUSPEND_STREAM_REQ_EVT, NULL, 0);
+            }
+            else
+            {
+                /* if we are not in started state, just ack back ok and let
+                   audioflinger close the channel. This can happen if we are
+                   remotely suspended */
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+            }
+            break;
+
+        default:
+            APPL_TRACE_ERROR1("UNSUPPORTED CMD (%d)", cmd);
+            a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+            break;
+    }
+    APPL_TRACE_DEBUG1("a2dp-ctrl-cmd : %s DONE", dump_a2dp_ctrl_event(cmd));
+}
+
+static void btif_a2dp_ctrl_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event)
+{
+    APPL_TRACE_DEBUG1("A2DP-CTRL-CHANNEL EVENT %s", dump_uipc_event(event));
+
+    switch(event)
+    {
+        case UIPC_OPEN_EVT:
+            /* fetch av statemachine handle */
+            btif_media_cb.av_sm_hdl = btif_av_get_sm_handle();
+            break;
+
+        case UIPC_CLOSE_EVT:
+            /* restart ctrl server unless we are shutting down */
+            if (media_task_running == MEDIA_TASK_STATE_ON)
+                UIPC_Open(UIPC_CH_ID_AV_CTRL , btif_a2dp_ctrl_cb);
+            break;
+
+        case UIPC_RX_DATA_READY_EVT:
+            btif_recv_ctrl_data();
+            break;
+
+        default :
+            APPL_TRACE_ERROR1("### A2DP-CTRL-CHANNEL EVENT %d NOT HANDLED ###", event);
+            break;
+    }
+}
+
+static void btif_a2dp_data_cb(tUIPC_CH_ID ch_id, tUIPC_EVENT event)
+{
+    APPL_TRACE_DEBUG1("BTIF MEDIA (A2DP-DATA) EVENT %s", dump_uipc_event(event));
+
+    switch(event)
+    {
+        case UIPC_OPEN_EVT:
+
+            /*  read directly from media task from here on (keep callback for
+                connection events */
+            UIPC_Ioctl(UIPC_CH_ID_AV_AUDIO, UIPC_REG_REMOVE_ACTIVE_READSET, NULL);
+
+            /* Start the media task to encode SBC */
+            btif_media_task_start_aa_req();
+
+            /* make sure we update any changed sbc encoder params */
+            btif_a2dp_encoder_update();
+
+            /* ack back when media task is fully started */
+            break;
+
+        case UIPC_CLOSE_EVT:
+            a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+            btif_audiopath_detached();
+            break;
+
+        default :
+            APPL_TRACE_ERROR1("### A2DP-DATA EVENT %d NOT HANDLED ###", event);
+            break;
+    }
+}
+
+
+/*****************************************************************************
+ **  BTIF ADAPTATION
+ *****************************************************************************/
+
+static void btif_a2dp_encoder_init(void)
+{
+    UINT16 minmtu;
+    tBTIF_MEDIA_INIT_AUDIO msg;
+    tA2D_SBC_CIE sbc_config;
+
+    /* lookup table for converting channel mode */
+    UINT16 codec_mode_tbl[5] = { SBC_JOINT_STEREO, SBC_STEREO, SBC_DUAL, 0, SBC_MONO };
+
+    /* lookup table for converting number of blocks */
+    UINT16 codec_block_tbl[5] = { 16, 12, 8, 0, 4 };
+
+    /* lookup table to convert freq */
+    UINT16 freq_block_tbl[5] = { SBC_sf48000, SBC_sf44100, SBC_sf32000, 0, SBC_sf16000 };
+
+    APPL_TRACE_DEBUG0("btif_a2dp_encoder_init");
+
+    /* Retrieve the current SBC configuration (default if currently not used) */
+    bta_av_co_audio_get_sbc_config(&sbc_config, &minmtu);
+    msg.NumOfSubBands = (sbc_config.num_subbands == A2D_SBC_IE_SUBBAND_4) ? 4 : 8;
+    msg.NumOfBlocks = codec_block_tbl[sbc_config.block_len >> 5];
+    msg.AllocationMethod = (sbc_config.alloc_mthd == A2D_SBC_IE_ALLOC_MD_L) ? SBC_LOUDNESS : SBC_SNR;
+    msg.ChannelMode = codec_mode_tbl[sbc_config.ch_mode >> 1];
+    msg.SamplingFreq = freq_block_tbl[sbc_config.samp_freq >> 5];
+    msg.MtuSize = minmtu;
+
+    APPL_TRACE_EVENT1("msg.ChannelMode %x", msg.ChannelMode);
+
+    /* Init the media task to encode SBC properly */
+    btif_media_task_enc_init_req(&msg);
+}
+
+static void btif_a2dp_encoder_update(void)
+{
+    UINT16 minmtu;
+    tA2D_SBC_CIE sbc_config;
+    tBTIF_MEDIA_UPDATE_AUDIO msg;
+    UINT8 pref_min;
+    UINT8 pref_max;
+
+    APPL_TRACE_DEBUG0("btif_a2dp_encoder_update");
+
+    /* Retrieve the current SBC configuration (default if currently not used) */
+    bta_av_co_audio_get_sbc_config(&sbc_config, &minmtu);
+
+    APPL_TRACE_DEBUG4("btif_a2dp_encoder_update: Common min_bitpool:%d(0x%x) max_bitpool:%d(0x%x)",
+            sbc_config.min_bitpool, sbc_config.min_bitpool,
+            sbc_config.max_bitpool, sbc_config.max_bitpool);
+
+    if (sbc_config.min_bitpool > sbc_config.max_bitpool)
+    {
+        APPL_TRACE_ERROR0("btif_a2dp_encoder_update: ERROR btif_a2dp_encoder_update min_bitpool > max_bitpool");
+    }
+
+    /* check if remote sink has a preferred bitpool range */
+    if (bta_av_co_get_remote_bitpool_pref(&pref_min, &pref_max) == TRUE)
+    {
+        /* adjust our preferred bitpool with the remote preference if within
+           our capable range */
+
+        if (pref_min < sbc_config.min_bitpool)
+            pref_min = sbc_config.min_bitpool;
+
+        if (pref_max > sbc_config.max_bitpool)
+            pref_max = sbc_config.max_bitpool;
+
+        msg.MinBitPool = pref_min;
+        msg.MaxBitPool = pref_max;
+
+        if ((pref_min != sbc_config.min_bitpool) || (pref_max != sbc_config.max_bitpool))
+        {
+            APPL_TRACE_EVENT2("## adjusted our bitpool range to peer pref [%d:%d] ##",
+                pref_min, pref_max);
+        }
+    }
+    else
+    {
+        msg.MinBitPool = sbc_config.min_bitpool;
+        msg.MaxBitPool = sbc_config.max_bitpool;
+    }
+
+    msg.MinMtuSize = minmtu;
+
+    /* Update the media task to encode SBC properly */
+    btif_media_task_enc_update_req(&msg);
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_start_media_task
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+int btif_a2dp_start_media_task(void)
+{
+    int retval;
+
+    if (media_task_running != MEDIA_TASK_STATE_OFF)
+    {
+        APPL_TRACE_ERROR0("warning : media task already running");
+        return GKI_FAILURE;
+    }
+
+    APPL_TRACE_EVENT0("## A2DP START MEDIA TASK ##");
+
+    /* start a2dp media task */
+    retval = GKI_create_task((TASKPTR)btif_media_task, A2DP_MEDIA_TASK,
+                A2DP_MEDIA_TASK_TASK_STR,
+                (UINT16 *) ((UINT8 *)a2dp_media_task_stack + A2DP_MEDIA_TASK_STACK_SIZE),
+                sizeof(a2dp_media_task_stack));
+
+    if (retval != GKI_SUCCESS)
+        return retval;
+
+    /* wait for task to come up to sure we are able to send messages to it */
+    while (media_task_running == MEDIA_TASK_STATE_OFF)
+        usleep(10);
+
+    APPL_TRACE_EVENT0("## A2DP MEDIA TASK STARTED ##");
+
+    return retval;
+}
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_stop_media_task
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_stop_media_task(void)
+{
+    APPL_TRACE_EVENT0("## A2DP STOP MEDIA TASK ##");
+    GKI_destroy_task(BT_MEDIA_TASK);
+}
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_init
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_init(void)
+{
+    //tput_mon(1, 0, 1);
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_setup_codec
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_setup_codec(void)
+{
+    tBTIF_AV_MEDIA_FEEDINGS media_feeding;
+    tBTIF_STATUS status;
+
+    APPL_TRACE_EVENT0("## A2DP SETUP CODEC ##");
+
+    GKI_disable();
+
+    /* for now hardcode 44.1 khz 16 bit stereo */
+    media_feeding.cfg.pcm.sampling_freq = 44100;
+    media_feeding.cfg.pcm.bit_per_sample = 16;
+    media_feeding.cfg.pcm.num_channel = 2;
+    media_feeding.format = BTIF_AV_CODEC_PCM;
+
+    if (bta_av_co_audio_set_codec(&media_feeding, &status))
+    {
+        tBTIF_MEDIA_INIT_AUDIO_FEEDING mfeed;
+
+        /* Init the encoding task */
+        btif_a2dp_encoder_init();
+
+        /* Build the media task configuration */
+        mfeed.feeding = media_feeding;
+        mfeed.feeding_mode = BTIF_AV_FEEDING_ASYNCHRONOUS;
+        /* Send message to Media task to configure transcoding */
+        btif_media_task_audio_feeding_init_req(&mfeed);
+    }
+
+    GKI_enable();
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_idle
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_idle(void)
+{
+    APPL_TRACE_EVENT0("## ON A2DP IDLE ##");
+
+    /* Make sure media task is stopped */
+    btif_media_task_stop_aa_req();
+
+    bta_av_co_init();
+}
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_open
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_open(void)
+{
+    APPL_TRACE_EVENT0("## ON A2DP OPEN ##");
+
+    /* always use callback to notify socket events */
+    UIPC_Open(UIPC_CH_ID_AV_AUDIO, btif_a2dp_data_cb);
+}
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_started
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_started(tBTA_AV_START *p_av)
+{
+    tBTIF_AV_MEDIA_FEEDINGS media_feeding;
+    tBTIF_STATUS status;
+
+    APPL_TRACE_EVENT0("## ON A2DP STARTED ##");
+
+    if (p_av->status == BTA_AV_SUCCESS)
+    {
+        if (p_av->suspending == FALSE)
+        {
+            if (p_av->initiator)
+            {
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_SUCCESS);
+            }
+            else
+            {
+                /* we were remotely started,  make sure codec
+                   is setup before datapath is started */
+                btif_a2dp_setup_codec();
+            }
+
+            /* media task is autostarted upon a2dp audiopath connection */
+        }
+    }
+    else
+    {
+        a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+    }
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_stopped
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_stopped(tBTA_AV_SUSPEND *p_av)
+{
+    APPL_TRACE_EVENT0("## ON A2DP STOPPED ##");
+
+    /* allow using this api for other than suspend */
+    if (p_av != NULL)
+    {
+        if (p_av->status != BTA_AV_SUCCESS)
+        {
+            APPL_TRACE_EVENT1("AV STOP FAILED (%d)", p_av->status);
+
+            if (p_av->initiator)
+                a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+            return;
+        }
+    }
+
+    /* ensure tx frames are immediately suspended */
+    btif_media_cb.tx_flush = 1;
+
+    /* request to stop media task  */
+    btif_media_task_aa_tx_flush_req();
+    btif_media_task_stop_aa_req();
+
+    /* once stream is fully stopped we will ack back */
+}
+
+
+/*****************************************************************************
+**
+** Function        btif_a2dp_on_suspended
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+void btif_a2dp_on_suspended(tBTA_AV_SUSPEND *p_av)
+{
+    APPL_TRACE_EVENT0("## ON A2DP SUSPENDED ##");
+
+    /* check for status failures */
+    if (p_av->status != BTA_AV_SUCCESS)
+    {
+        if (p_av->initiator == TRUE)
+            a2dp_cmd_acknowledge(A2DP_CTRL_ACK_FAILURE);
+    }
+
+    /* once stream is fully stopped we will ack back */
+
+    /* ensure tx frames are immediately flushed */
+    btif_media_cb.tx_flush = 1;
+
+    /* stop timer tick */
+    btif_media_task_stop_aa_req();
+}
+
+/* when true media task discards any tx frames */
+void btif_a2dp_set_tx_flush(BOOLEAN enable)
+{
+    APPL_TRACE_EVENT1("## DROP TX %d ##", enable);
+    btif_media_cb.tx_flush = enable;
+}
+
+/*****************************************************************************
+**
+** Function        btif_calc_pcmtime
+**
+** Description     Calculates the pcmtime equivalent of a datapacket
+**
+** Returns         microseconds
+**
+*******************************************************************************/
+
+static int btif_calc_pcmtime(UINT32 bytes_processed)
+{
+    int pcm_time_us = 0;
+    tBTIF_AV_MEDIA_FEED_CFG *p_cfg;
+
+    p_cfg = &btif_media_cb.media_feeding.cfg;
+
+    /* calculate corresponding pcm time based on data processed */
+    switch(btif_media_cb.media_feeding.format)
+    {
+        case BTIF_AV_CODEC_PCM:
+            pcm_time_us = (bytes_processed*1000000)/
+                          (p_cfg->pcm.num_channel*p_cfg->pcm.sampling_freq*p_cfg->pcm.bit_per_sample/8);
+            break;
+
+        default :
+            APPL_TRACE_ERROR1("mediafeeding format invalid : %d", btif_media_cb.media_feeding.format);
+            break;
+    }
+
+    return pcm_time_us;
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_handle_timer
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+static void btif_media_task_aa_handle_timer(void)
+{
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    static UINT16 Debug = 0;
+    APPL_TRACE_DEBUG1("btif_media_task_aa_handle_timer: %d", Debug++);
+#endif
+
+    log_tstamps_us("media task tx timer");
+
+#if (BTA_AV_INCLUDED == TRUE)
+    btif_media_send_aa_frame();
+#endif
+}
+
+#if (BTA_AV_INCLUDED == TRUE)
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_handle_timer
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_aa_handle_uipc_rx_rdy(void)
+{
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    static UINT16 Debug = 0;
+    APPL_TRACE_DEBUG1("btif_media_task_aa_handle_uipc_rx_rdy: %d", Debug++);
+#endif
+
+    /* process all the UIPC data */
+    btif_media_aa_prep_2_send(0xFF);
+
+    /* send it */
+    VERBOSE("btif_media_task_aa_handle_uipc_rx_rdy calls bta_av_ci_src_data_ready");
+    bta_av_ci_src_data_ready(BTA_AV_CHNL_AUDIO);
+}
+#endif
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_init
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+void btif_media_task_init(void)
+{
+    memset(&(btif_media_cb), 0, sizeof(btif_media_cb));
+
+    UIPC_Init(NULL);
+
+#if (BTA_AV_INCLUDED == TRUE)
+    UIPC_Open(UIPC_CH_ID_AV_CTRL , btif_a2dp_ctrl_cb);
+#endif
+
+
+}
+/*******************************************************************************
+ **
+ ** Function         btif_media_task
+ **
+ ** Description      Task for SBC encoder.  This task receives an
+ **                  event when the waveIn interface has a pcm data buffer
+ **                  ready.  On receiving the event, handle all ready pcm
+ **                  data buffers.  If stream is started, run the SBC encoder
+ **                  on each chunk of pcm samples and build an output packet
+ **                  consisting of one or more encoded SBC frames.
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+int btif_media_task(void *p)
+{
+    UINT16 event;
+    BT_HDR *p_msg;
+
+    VERBOSE("================ MEDIA TASK STARTING ================");
+
+    btif_media_task_init();
+
+    media_task_running = MEDIA_TASK_STATE_ON;
+
+    raise_priority_a2dp(TASK_HIGH_MEDIA);
+
+    while (1)
+    {
+        event = GKI_wait(0xffff, 0);
+
+        VERBOSE("================= MEDIA TASK EVENT %d ===============", event);
+
+        if (event & BTIF_MEDIA_TASK_CMD)
+        {
+            /* Process all messages in the queue */
+            while ((p_msg = (BT_HDR *) GKI_read_mbox(BTIF_MEDIA_TASK_CMD_MBOX)) != NULL)
+            {
+                btif_media_task_handle_cmd(p_msg);
+            }
+        }
+
+        if (event & BTIF_MEDIA_TASK_DATA)
+        {
+            /* Process all messages in the queue */
+            while ((p_msg = (BT_HDR *) GKI_read_mbox(BTIF_MEDIA_TASK_DATA_MBOX)) != NULL)
+            {
+                btif_media_task_handle_media(p_msg);
+            }
+        }
+
+        if (event & BTIF_MEDIA_AA_TASK_TIMER)
+        {
+            /* advance audio timer expiration */
+            btif_media_task_aa_handle_timer();
+        }
+
+
+        VERBOSE("=============== MEDIA TASK EVENT %d DONE ============", event);
+
+        /* When we get this event we exit the task  - should only happen on GKI_shutdown  */
+        if (event & BTIF_MEDIA_TASK_KILL)
+        {
+            /* make sure no channels are restarted while shutting down */
+            media_task_running = MEDIA_TASK_STATE_SHUTTING_DOWN;
+
+            /* this calls blocks until uipc is fully closed */
+            UIPC_Close(UIPC_CH_ID_ALL);
+            break;
+        }
+    }
+
+    /* Clear media task flag */
+    media_task_running = MEDIA_TASK_STATE_OFF;
+
+    APPL_TRACE_DEBUG0("MEDIA TASK EXITING");
+
+    return 0;
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_send_cmd_evt
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_send_cmd_evt(UINT16 Evt)
+{
+    BT_HDR *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(BT_HDR))))
+    {
+        return FALSE;
+    }
+
+    p_buf->event = Evt;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_flush_q
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_flush_q(BUFFER_Q *p_q)
+{
+    while (GKI_IS_QUEUE_EMPTY(p_q) == FALSE)
+    {
+        GKI_freebuf(GKI_dequeue(p_q));
+    }
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_handle_cmd
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_handle_cmd(BT_HDR *p_msg)
+{
+    VERBOSE("btif_media_task_handle_cmd : %d %s", p_msg->event, dump_media_event(p_msg->event));
+
+    switch (p_msg->event)
+    {
+#if (BTA_AV_INCLUDED == TRUE)
+    case BTIF_MEDIA_START_AA_TX:
+        btif_media_task_aa_start_tx();
+        break;
+    case BTIF_MEDIA_STOP_AA_TX:
+        btif_media_task_aa_stop_tx();
+        break;
+    case BTIF_MEDIA_SBC_ENC_INIT:
+        btif_media_task_enc_init(p_msg);
+        break;
+    case BTIF_MEDIA_SBC_ENC_UPDATE:
+        btif_media_task_enc_update(p_msg);
+        break;
+    case BTIF_MEDIA_AUDIO_FEEDING_INIT:
+        btif_media_task_audio_feeding_init(p_msg);
+        break;
+    case BTIF_MEDIA_FLUSH_AA_TX:
+        btif_media_task_aa_tx_flush(p_msg);
+        break;
+    case BTIF_MEDIA_UIPC_RX_RDY:
+        btif_media_task_aa_handle_uipc_rx_rdy();
+        break;
+#endif
+    default:
+        APPL_TRACE_ERROR1("ERROR in btif_media_task_handle_cmd unknown event %d", p_msg->event);
+    }
+    GKI_freebuf(p_msg);
+    VERBOSE("btif_media_task_handle_cmd : %s DONE", dump_media_event(p_msg->event));
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_handle_media
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_handle_media(BT_HDR *p_msg)
+{
+    APPL_TRACE_ERROR0("ERROR btif_media_task_handle_media: not in use");
+
+    GKI_freebuf(p_msg);
+}
+
+
+
+
+#if (BTA_AV_INCLUDED == TRUE)
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_enc_init_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_enc_init_req(tBTIF_MEDIA_INIT_AUDIO *p_msg)
+{
+    tBTIF_MEDIA_INIT_AUDIO *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(tBTIF_MEDIA_INIT_AUDIO))))
+    {
+        return FALSE;
+    }
+
+    memcpy(p_buf, p_msg, sizeof(tBTIF_MEDIA_INIT_AUDIO));
+    p_buf->hdr.event = BTIF_MEDIA_SBC_ENC_INIT;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_enc_update_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_enc_update_req(tBTIF_MEDIA_UPDATE_AUDIO *p_msg)
+{
+    tBTIF_MEDIA_UPDATE_AUDIO *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(tBTIF_MEDIA_UPDATE_AUDIO))))
+    {
+        return FALSE;
+    }
+
+    memcpy(p_buf, p_msg, sizeof(tBTIF_MEDIA_UPDATE_AUDIO));
+    p_buf->hdr.event = BTIF_MEDIA_SBC_ENC_UPDATE;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_audio_feeding_init_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_audio_feeding_init_req(tBTIF_MEDIA_INIT_AUDIO_FEEDING *p_msg)
+{
+    tBTIF_MEDIA_INIT_AUDIO_FEEDING *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(tBTIF_MEDIA_INIT_AUDIO_FEEDING))))
+    {
+        return FALSE;
+    }
+
+    memcpy(p_buf, p_msg, sizeof(tBTIF_MEDIA_INIT_AUDIO_FEEDING));
+    p_buf->hdr.event = BTIF_MEDIA_AUDIO_FEEDING_INIT;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_start_aa_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_start_aa_req(void)
+{
+    BT_HDR *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(BT_HDR))))
+    {
+        APPL_TRACE_EVENT0("GKI failed");
+        return FALSE;
+    }
+
+    p_buf->event = BTIF_MEDIA_START_AA_TX;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_stop_aa_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_stop_aa_req(void)
+{
+    BT_HDR *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(BT_HDR))))
+    {
+        return FALSE;
+    }
+
+    p_buf->event = BTIF_MEDIA_STOP_AA_TX;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_tx_flush_req
+ **
+ ** Description
+ **
+ ** Returns          TRUE is success
+ **
+ *******************************************************************************/
+BOOLEAN btif_media_task_aa_tx_flush_req(void)
+{
+    BT_HDR *p_buf;
+    if (NULL == (p_buf = GKI_getbuf(sizeof(BT_HDR))))
+    {
+        return FALSE;
+    }
+
+    p_buf->event = BTIF_MEDIA_FLUSH_AA_TX;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_buf);
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_tx_flush
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_aa_tx_flush(BT_HDR *p_msg)
+{
+    /* Flush all enqueued GKI music buffers (encoded) */
+    APPL_TRACE_DEBUG0("btif_media_task_aa_tx_flush");
+
+    btif_media_flush_q(&(btif_media_cb.TxAaQ));
+
+    UIPC_Ioctl(UIPC_CH_ID_AV_AUDIO, UIPC_REQ_RX_FLUSH, NULL);
+}
+
+/*******************************************************************************
+ **
+ ** Function       btif_media_task_enc_init
+ **
+ ** Description    Initialize encoding task
+ **
+ ** Returns        void
+ **
+ *******************************************************************************/
+static void btif_media_task_enc_init(BT_HDR *p_msg)
+{
+    tBTIF_MEDIA_INIT_AUDIO *pInitAudio = (tBTIF_MEDIA_INIT_AUDIO *) p_msg;
+
+    APPL_TRACE_DEBUG0("btif_media_task_enc_init");
+
+    btif_media_cb.timestamp = 0;
+
+    /* SBC encoder config (enforced even if not used) */
+    btif_media_cb.encoder.s16ChannelMode = pInitAudio->ChannelMode;
+    btif_media_cb.encoder.s16NumOfSubBands = pInitAudio->NumOfSubBands;
+    btif_media_cb.encoder.s16NumOfBlocks = pInitAudio->NumOfBlocks;
+    btif_media_cb.encoder.s16AllocationMethod = pInitAudio->AllocationMethod;
+    btif_media_cb.encoder.s16SamplingFreq = pInitAudio->SamplingFreq;
+
+    btif_media_cb.encoder.u16BitRate = DEFAULT_SBC_BITRATE;
+    /* Default transcoding is PCM to SBC, modified by feeding configuration */
+    btif_media_cb.TxTranscoding = BTIF_MEDIA_TRSCD_PCM_2_SBC;
+    btif_media_cb.TxAaMtuSize = ((BTIF_MEDIA_AA_BUF_SIZE-BTIF_MEDIA_AA_SBC_OFFSET-sizeof(BT_HDR))
+            < pInitAudio->MtuSize) ? (BTIF_MEDIA_AA_BUF_SIZE - BTIF_MEDIA_AA_SBC_OFFSET
+            - sizeof(BT_HDR)) : pInitAudio->MtuSize;
+
+    APPL_TRACE_EVENT3("btif_media_task_enc_init busy %d, mtu %d, peer mtu %d",
+                     btif_media_cb.busy_level, btif_media_cb.TxAaMtuSize, pInitAudio->MtuSize);
+    APPL_TRACE_EVENT6("      ch mode %d, subnd %d, nb blk %d, alloc %d, rate %d, freq %d",
+            btif_media_cb.encoder.s16ChannelMode, btif_media_cb.encoder.s16NumOfSubBands,
+            btif_media_cb.encoder.s16NumOfBlocks,
+            btif_media_cb.encoder.s16AllocationMethod, btif_media_cb.encoder.u16BitRate,
+            btif_media_cb.encoder.s16SamplingFreq);
+
+    /* Reset entirely the SBC encoder */
+    SBC_Encoder_Init(&(btif_media_cb.encoder));
+    APPL_TRACE_DEBUG1("btif_media_task_enc_init bit pool %d", btif_media_cb.encoder.s16BitPool);
+}
+
+/*******************************************************************************
+ **
+ ** Function       btif_media_task_enc_update
+ **
+ ** Description    Update encoding task
+ **
+ ** Returns        void
+ **
+ *******************************************************************************/
+
+static void btif_media_task_enc_update(BT_HDR *p_msg)
+{
+    tBTIF_MEDIA_UPDATE_AUDIO * pUpdateAudio = (tBTIF_MEDIA_UPDATE_AUDIO *) p_msg;
+    SBC_ENC_PARAMS *pstrEncParams = &btif_media_cb.encoder;
+    UINT16 s16SamplingFreq;
+    SINT16 s16BitPool;
+    SINT16 s16BitRate;
+    SINT16 s16FrameLen;
+    UINT8 protect = 0;
+
+    APPL_TRACE_DEBUG3("btif_media_task_enc_update : minmtu %d, maxbp %d minbp %d",
+            pUpdateAudio->MinMtuSize, pUpdateAudio->MaxBitPool, pUpdateAudio->MinBitPool);
+
+    /* Only update the bitrate and MTU size while timer is running to make sure it has been initialized */
+    //if (btif_media_cb.is_tx_timer)
+    {
+        btif_media_cb.TxAaMtuSize = ((BTIF_MEDIA_AA_BUF_SIZE - BTIF_MEDIA_AA_SBC_OFFSET - sizeof(BT_HDR))
+                < pUpdateAudio->MinMtuSize) ? (BTIF_MEDIA_AA_BUF_SIZE - BTIF_MEDIA_AA_SBC_OFFSET
+                - sizeof(BT_HDR)) : pUpdateAudio->MinMtuSize;
+
+        /* Set the initial target bit rate */
+        pstrEncParams->u16BitRate = DEFAULT_SBC_BITRATE;
+
+        if (pstrEncParams->s16SamplingFreq == SBC_sf16000)
+            s16SamplingFreq = 16000;
+        else if (pstrEncParams->s16SamplingFreq == SBC_sf32000)
+            s16SamplingFreq = 32000;
+        else if (pstrEncParams->s16SamplingFreq == SBC_sf44100)
+            s16SamplingFreq = 44100;
+        else
+            s16SamplingFreq = 48000;
+
+        do
+        {
+            if ((pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO) ||
+                (pstrEncParams->s16ChannelMode == SBC_STEREO) )
+            {
+                s16BitPool = (SINT16)( (pstrEncParams->u16BitRate *
+                    pstrEncParams->s16NumOfSubBands * 1000 / s16SamplingFreq)
+                    -( (32 + (4 * pstrEncParams->s16NumOfSubBands *
+                    pstrEncParams->s16NumOfChannels)
+                    + ( (pstrEncParams->s16ChannelMode - 2) *
+                    pstrEncParams->s16NumOfSubBands )   )
+                    / pstrEncParams->s16NumOfBlocks) );
+
+                s16FrameLen = 4 + (4*pstrEncParams->s16NumOfSubBands*
+                    pstrEncParams->s16NumOfChannels)/8
+                    + ( ((pstrEncParams->s16ChannelMode - 2) *
+                    pstrEncParams->s16NumOfSubBands)
+                    + (pstrEncParams->s16NumOfBlocks * s16BitPool) ) / 8;
+
+                s16BitRate = (8 * s16FrameLen * s16SamplingFreq)
+                    / (pstrEncParams->s16NumOfSubBands *
+                    pstrEncParams->s16NumOfBlocks * 1000);
+
+                if (s16BitRate > pstrEncParams->u16BitRate)
+                    s16BitPool--;
+
+                if(pstrEncParams->s16NumOfSubBands == 8)
+                    s16BitPool = (s16BitPool > 255) ? 255 : s16BitPool;
+                else
+                    s16BitPool = (s16BitPool > 128) ? 128 : s16BitPool;
+            }
+            else
+            {
+                s16BitPool = (SINT16)( ((pstrEncParams->s16NumOfSubBands *
+                    pstrEncParams->u16BitRate * 1000)
+                    / (s16SamplingFreq * pstrEncParams->s16NumOfChannels))
+                    -( ( (32 / pstrEncParams->s16NumOfChannels) +
+                    (4 * pstrEncParams->s16NumOfSubBands) )
+                    /   pstrEncParams->s16NumOfBlocks ) );
+
+                pstrEncParams->s16BitPool = (s16BitPool >
+                    (16 * pstrEncParams->s16NumOfSubBands))
+                    ? (16*pstrEncParams->s16NumOfSubBands) : s16BitPool;
+            }
+
+            if (s16BitPool < 0)
+            {
+                s16BitPool = 0;
+            }
+
+            APPL_TRACE_EVENT2("bitpool candidate : %d (%d kbps)", s16BitPool, pstrEncParams->u16BitRate);
+
+            if (s16BitPool > pUpdateAudio->MaxBitPool)
+            {
+                APPL_TRACE_WARNING1("btif_media_task_enc_update computed bitpool too large (%d)", s16BitPool);
+                /* Decrease bitrate */
+                btif_media_cb.encoder.u16BitRate -= BTIF_MEDIA_BITRATE_STEP;
+                /* Record that we have decreased the bitrate */
+                protect |= 1;
+            }
+            else if (s16BitPool < pUpdateAudio->MinBitPool)
+            {
+                APPL_TRACE_WARNING1("btif_media_task_enc_update computed bitpool too small (%d)", s16BitPool);
+                /* Increase bitrate */
+                btif_media_cb.encoder.u16BitRate += BTIF_MEDIA_BITRATE_STEP;
+                /* Record that we have increased the bitrate */
+                protect |= 2;
+            }
+            else
+            {
+                break;
+            }
+            /* In case we have already increased and decreased the bitrate, just stop */
+            if (protect == 3)
+            {
+                APPL_TRACE_ERROR0("btif_media_task_enc_update could not find bitpool in range");
+                break;
+            }
+        } while (1);
+
+        /* Finally update the bitpool in the encoder structure */
+        pstrEncParams->s16BitPool = s16BitPool;
+
+        APPL_TRACE_DEBUG2("btif_media_task_enc_update final bit rate %d, final bit pool %d",
+                btif_media_cb.encoder.u16BitRate, btif_media_cb.encoder.s16BitPool);
+
+        /* make sure we reinitialize encoder with new settings */
+        SBC_Encoder_Init(&(btif_media_cb.encoder));
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_pcm2sbc_init
+ **
+ ** Description      Init encoding task for PCM to SBC according to feeding
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_pcm2sbc_init(tBTIF_MEDIA_INIT_AUDIO_FEEDING * p_feeding)
+{
+    BOOLEAN reconfig_needed = FALSE;
+
+    APPL_TRACE_DEBUG0("PCM feeding:");
+    APPL_TRACE_DEBUG1("sampling_freq:%d", p_feeding->feeding.cfg.pcm.sampling_freq);
+    APPL_TRACE_DEBUG1("num_channel:%d", p_feeding->feeding.cfg.pcm.num_channel);
+    APPL_TRACE_DEBUG1("bit_per_sample:%d", p_feeding->feeding.cfg.pcm.bit_per_sample);
+
+
+    /* Check the PCM feeding sampling_freq */
+    switch (p_feeding->feeding.cfg.pcm.sampling_freq)
+    {
+        case  8000:
+        case 12000:
+        case 16000:
+        case 24000:
+        case 32000:
+        case 48000:
+            /* For these sampling_freq the AV connection must be 48000 */
+            if (btif_media_cb.encoder.s16SamplingFreq != SBC_sf48000)
+            {
+                /* Reconfiguration needed at 48000 */
+                APPL_TRACE_DEBUG0("SBC Reconfiguration needed at 48000");
+                btif_media_cb.encoder.s16SamplingFreq = SBC_sf48000;
+                reconfig_needed = TRUE;
+            }
+            break;
+
+        case 11025:
+        case 22050:
+        case 44100:
+            /* For these sampling_freq the AV connection must be 44100 */
+            if (btif_media_cb.encoder.s16SamplingFreq != SBC_sf44100)
+            {
+                /* Reconfiguration needed at 44100 */
+                APPL_TRACE_DEBUG0("SBC Reconfiguration needed at 44100");
+                btif_media_cb.encoder.s16SamplingFreq = SBC_sf44100;
+                reconfig_needed = TRUE;
+            }
+            break;
+        default:
+            APPL_TRACE_DEBUG0("Feeding PCM sampling_freq unsupported");
+            break;
+    }
+
+    /* Some AV Headsets do not support Mono => always ask for Stereo */
+    if (btif_media_cb.encoder.s16ChannelMode == SBC_MONO)
+    {
+        APPL_TRACE_DEBUG0("SBC Reconfiguration needed in Stereo");
+        btif_media_cb.encoder.s16ChannelMode = SBC_JOINT_STEREO;
+        reconfig_needed = TRUE;
+    }
+
+    if (reconfig_needed != FALSE)
+    {
+        APPL_TRACE_DEBUG0("btif_media_task_pcm2sbc_init calls SBC_Encoder_Init");
+        APPL_TRACE_DEBUG1("btif_media_task_pcm2sbc_init mtu %d", btif_media_cb.TxAaMtuSize);
+        APPL_TRACE_DEBUG6("btif_media_task_pcm2sbc_init ch mode %d, nbsubd %d, nb blk %d, alloc method %d, bit rate %d, Smp freq %d",
+                btif_media_cb.encoder.s16ChannelMode, btif_media_cb.encoder.s16NumOfSubBands, btif_media_cb.encoder.s16NumOfBlocks,
+                btif_media_cb.encoder.s16AllocationMethod, btif_media_cb.encoder.u16BitRate, btif_media_cb.encoder.s16SamplingFreq);
+        SBC_Encoder_Init(&(btif_media_cb.encoder));
+    }
+    else
+    {
+        APPL_TRACE_DEBUG0("btif_media_task_pcm2sbc_init no SBC reconfig needed");
+    }
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_audio_feeding_init
+ **
+ ** Description      Initialize the audio path according to the feeding format
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_audio_feeding_init(BT_HDR *p_msg)
+{
+    tBTIF_MEDIA_INIT_AUDIO_FEEDING *p_feeding = (tBTIF_MEDIA_INIT_AUDIO_FEEDING *) p_msg;
+
+    APPL_TRACE_DEBUG1("btif_media_task_audio_feeding_init format:%d", p_feeding->feeding.format);
+
+    /* Save Media Feeding information */
+    btif_media_cb.feeding_mode = p_feeding->feeding_mode;
+    btif_media_cb.media_feeding = p_feeding->feeding;
+
+    /* Handle different feeding formats */
+    switch (p_feeding->feeding.format)
+    {
+        case BTIF_AV_CODEC_PCM:
+            btif_media_cb.TxTranscoding = BTIF_MEDIA_TRSCD_PCM_2_SBC;
+            btif_media_task_pcm2sbc_init(p_feeding);
+            break;
+
+        default :
+            APPL_TRACE_ERROR1("unknown feeding format %d", p_feeding->feeding.format);
+            break;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_uipc_cback
+ **
+ ** Description      UIPC call back function for synchronous mode only
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_uipc_cback(BT_HDR *p_msg)
+{
+    /* Sanity check */
+    if (NULL == p_msg)
+    {
+        return;
+    }
+
+    /* Just handle RX_EVT */
+    if (p_msg->event != UIPC_RX_DATA_EVT)
+    {
+        return;
+    }
+
+    p_msg->event = BTIF_MEDIA_UIPC_RX_RDY;
+
+    GKI_send_msg(BT_MEDIA_TASK, BTIF_MEDIA_TASK_CMD_MBOX, p_msg);
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_feeding_state_reset
+ **
+ ** Description      Reset the media feeding state
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_feeding_state_reset(void)
+{
+    /* By default, just clear the entire state */
+    memset(&btif_media_cb.media_feeding_state, 0, sizeof(btif_media_cb.media_feeding_state));
+}
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_start_tx
+ **
+ ** Description      Start media task encoding
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_aa_start_tx(void)
+{
+    APPL_TRACE_DEBUG2("btif_media_task_aa_start_tx is timer %d, feeding mode %d",
+            btif_media_cb.is_tx_timer, btif_media_cb.feeding_mode);
+
+
+    /* Use a timer to poll the UIPC, get rid of the UIPC call back */
+    // UIPC_Ioctl(UIPC_CH_ID_AV_AUDIO, UIPC_REG_CBACK, NULL);
+
+    btif_media_cb.is_tx_timer = TRUE;
+
+    /* Reset the media feeding state */
+    btif_media_task_feeding_state_reset();
+
+    APPL_TRACE_EVENT2("starting timer %d ticks (%d)", GKI_MS_TO_TICKS(BTIF_MEDIA_TIME_TICK), TICKS_PER_SEC);
+    GKI_start_timer(BTIF_MEDIA_AA_TASK_TIMER_ID, GKI_MS_TO_TICKS(BTIF_MEDIA_TIME_TICK), TRUE);
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_task_aa_stop_tx
+ **
+ ** Description      Stop media task encoding
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_task_aa_stop_tx(void)
+{
+    APPL_TRACE_DEBUG1("btif_media_task_aa_stop_tx is timer: %d", btif_media_cb.is_tx_timer);
+
+    /* Stop the timer first */
+    GKI_stop_timer(BTIF_MEDIA_AA_TASK_TIMER_ID);
+    btif_media_cb.is_tx_timer = FALSE;
+
+    UIPC_Close(UIPC_CH_ID_AV_AUDIO);
+
+    /* audio engine stopped, reset tx suspended flag */
+    btif_media_cb.tx_flush = 0;
+
+    /* Reset the media feeding state */
+    btif_media_task_feeding_state_reset();
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_get_num_aa_frame
+ **
+ ** Description
+ **
+ ** Returns          The number of media frames in this time slice
+ **
+ *******************************************************************************/
+
+
+static UINT8 btif_get_num_aa_frame(void)
+{
+    UINT8 result=0;
+
+    switch (btif_media_cb.TxTranscoding)
+    {
+        case BTIF_MEDIA_TRSCD_PCM_2_SBC:
+            switch (btif_media_cb.encoder.s16SamplingFreq)
+            {
+            case SBC_sf16000:
+                if (!btif_media_cb.scaling_disabled &&
+                    (btif_media_cb.media_feeding_state.pcm.aa_frame_counter++ % 2) == 0)
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_16-1;
+                }
+                else
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_16;
+                }
+                break;
+
+            case SBC_sf32000:
+                result = BTIF_MEDIA_FR_PER_TICKS_32;
+                break;
+
+            case SBC_sf48000:
+                if (!btif_media_cb.scaling_disabled &&
+                    (btif_media_cb.media_feeding_state.pcm.aa_frame_counter++ % 2) == 0)
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_48-1;
+                }
+                else
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_48;
+                }
+                break;
+
+            case SBC_sf44100:
+                if (!btif_media_cb.scaling_disabled &&
+                    (btif_media_cb.media_feeding_state.pcm.aa_frame_counter++ % 64) < 7)
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_44_1-1;
+                }
+                else
+                {
+                    result = BTIF_MEDIA_FR_PER_TICKS_44_1;
+                }
+                break;
+            }
+
+            VERBOSE("WRITE %d FRAMES", result);
+            break;
+
+        default:
+            APPL_TRACE_ERROR1("ERROR btif_get_num_aa_frame Unsupported transcoding format 0x%x",
+                    btif_media_cb.TxTranscoding);
+            result = 0;
+            break;
+    }
+
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    APPL_TRACE_DEBUG1("btif_get_num_aa_frame returns %d", result);
+#endif
+
+    return result;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_readbuf
+ **
+ ** Description      This function is called by the av_co to get the next buffer to send
+ **
+ **
+ ** Returns          void
+ *******************************************************************************/
+BT_HDR *btif_media_aa_readbuf(void)
+{
+    return GKI_dequeue(&(btif_media_cb.TxAaQ));
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_read_feeding
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+BOOLEAN btif_media_aa_read_feeding(tUIPC_CH_ID channel_id)
+{
+    UINT16 event;
+    /* coverity[SIGN_EXTENSION] False-positive: Parameter are always in range avoiding sign extension*/
+    UINT16 blocm_x_subband = btif_media_cb.encoder.s16NumOfSubBands * btif_media_cb.encoder.s16NumOfBlocks;
+    UINT32 read_size;
+    UINT16 sbc_sampling = 48000;
+    UINT32 src_samples;
+    UINT16 bytes_needed = blocm_x_subband * btif_media_cb.encoder.s16NumOfChannels * sizeof(SINT16);
+    static UINT16 up_sampled_buffer[SBC_MAX_NUM_FRAME * SBC_MAX_NUM_OF_BLOCKS
+            * SBC_MAX_NUM_OF_CHANNELS * SBC_MAX_NUM_OF_SUBBANDS * 2];
+    static UINT16 read_buffer[SBC_MAX_NUM_FRAME * SBC_MAX_NUM_OF_BLOCKS
+            * SBC_MAX_NUM_OF_CHANNELS * SBC_MAX_NUM_OF_SUBBANDS];
+    UINT32 src_size_used;
+    UINT32 dst_size_used;
+    BOOLEAN fract_needed;
+    INT32   fract_max;
+    INT32   fract_threshold;
+    UINT32  nb_byte_read;
+
+    /* Get the SBC sampling rate */
+    switch (btif_media_cb.encoder.s16SamplingFreq)
+    {
+    case SBC_sf48000:
+        sbc_sampling = 48000;
+        break;
+    case SBC_sf44100:
+        sbc_sampling = 44100;
+        break;
+    case SBC_sf32000:
+        sbc_sampling = 32000;
+        break;
+    case SBC_sf16000:
+        sbc_sampling = 16000;
+        break;
+    }
+
+    /* Some Feeding PCM frequencies require to split the number of sample */
+    /* to read. */
+    /* E.g 128/6=21.3333 => read 22 and 21 and 21 => max = 2; threshold = 0*/
+    fract_needed = FALSE;   /* Default */
+    switch (btif_media_cb.media_feeding.cfg.pcm.sampling_freq)
+    {
+    case 32000:
+    case 8000:
+        fract_needed = TRUE;
+        fract_max = 2;          /* 0, 1 and 2 */
+        fract_threshold = 0;    /* Add one for the first */
+        break;
+    case 16000:
+        fract_needed = TRUE;
+        fract_max = 2;          /* 0, 1 and 2 */
+        fract_threshold = 1;    /* Add one for the first two frames*/
+        break;
+    }
+
+    /* Compute number of sample to read from source */
+    src_samples = blocm_x_subband;
+    src_samples *= btif_media_cb.media_feeding.cfg.pcm.sampling_freq;
+    src_samples /= sbc_sampling;
+
+    /* The previous division may have a remainder not null */
+    if (fract_needed)
+    {
+        if (btif_media_cb.media_feeding_state.pcm.aa_feed_counter <= fract_threshold)
+        {
+            src_samples++; /* for every read before threshold add one sample */
+        }
+
+        /* do nothing if counter >= threshold */
+        btif_media_cb.media_feeding_state.pcm.aa_feed_counter++; /* one more read */
+        if (btif_media_cb.media_feeding_state.pcm.aa_feed_counter > fract_max)
+        {
+            btif_media_cb.media_feeding_state.pcm.aa_feed_counter = 0;
+        }
+    }
+
+    /* Compute number of bytes to read from source */
+    read_size = src_samples;
+    read_size *= btif_media_cb.media_feeding.cfg.pcm.num_channel;
+    read_size *= (btif_media_cb.media_feeding.cfg.pcm.bit_per_sample / 8);
+
+    /* Read Data from UIPC channel */
+    nb_byte_read = UIPC_Read(channel_id, &event, (UINT8 *)read_buffer, read_size);
+
+    //tput_mon(TRUE, nb_byte_read, FALSE);
+
+    if (nb_byte_read < read_size)
+    {
+        APPL_TRACE_WARNING2("### UNDERRUN :: ONLY READ %d BYTES OUT OF %d ###",
+                nb_byte_read, read_size);
+
+        if (nb_byte_read == 0)
+            return FALSE;
+
+        if(btif_media_cb.feeding_mode == BTIF_AV_FEEDING_ASYNCHRONOUS)
+        {
+            /* Fill the unfilled part of the read buffer with silence (0) */
+            memset(((UINT8 *)read_buffer) + nb_byte_read, 0, read_size - nb_byte_read);
+            nb_byte_read = read_size;
+        }
+    }
+
+    /* Initialize PCM up-sampling engine */
+    bta_av_sbc_init_up_sample(btif_media_cb.media_feeding.cfg.pcm.sampling_freq,
+            sbc_sampling, btif_media_cb.media_feeding.cfg.pcm.bit_per_sample,
+            btif_media_cb.media_feeding.cfg.pcm.num_channel);
+
+    /* re-sample read buffer */
+    /* The output PCM buffer will be stereo, 16 bit per sec */
+    dst_size_used = bta_av_sbc_up_sample((UINT8 *)read_buffer,
+            (UINT8 *)up_sampled_buffer + btif_media_cb.media_feeding_state.pcm.aa_feed_residue,
+            nb_byte_read,
+            sizeof(up_sampled_buffer) - btif_media_cb.media_feeding_state.pcm.aa_feed_residue,
+            &src_size_used);
+
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    APPL_TRACE_DEBUG3("btif_media_aa_read_feeding read_size:%d src_size_used:%d dst_size_used:%d",
+            read_size, src_size_used, dst_size_used);
+#endif
+
+    /* update the residue */
+    btif_media_cb.media_feeding_state.pcm.aa_feed_residue += dst_size_used;
+
+    /* only copy the pcm sample when we have up-sampled enough PCM */
+    if(btif_media_cb.media_feeding_state.pcm.aa_feed_residue >= bytes_needed)
+    {
+        /* Copy the output pcm samples in SBC encoding buffer */
+        memcpy((UINT8 *)btif_media_cb.encoder.as16PcmBuffer,
+                (UINT8 *)up_sampled_buffer,
+                bytes_needed);
+        /* update the residue */
+        btif_media_cb.media_feeding_state.pcm.aa_feed_residue -= bytes_needed;
+
+        if (btif_media_cb.media_feeding_state.pcm.aa_feed_residue != 0)
+        {
+            memcpy((UINT8 *)up_sampled_buffer,
+                   (UINT8 *)up_sampled_buffer + bytes_needed,
+                   btif_media_cb.media_feeding_state.pcm.aa_feed_residue);
+        }
+        return TRUE;
+    }
+
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    APPL_TRACE_DEBUG3("btif_media_aa_read_feeding residue:%d, dst_size_used %d, bytes_needed %d",
+            btif_media_cb.media_feeding_state.pcm.aa_feed_residue, dst_size_used, bytes_needed);
+#endif
+
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_prep_sbc_2_send
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_aa_prep_sbc_2_send(UINT8 nb_frame)
+{
+    BT_HDR * p_buf;
+    UINT16 blocm_x_subband = btif_media_cb.encoder.s16NumOfSubBands * btif_media_cb.encoder.s16NumOfBlocks;
+
+#if (defined(DEBUG_MEDIA_AV_FLOW) && (DEBUG_MEDIA_AV_FLOW == TRUE))
+    APPL_TRACE_DEBUG2("btif_media_aa_prep_sbc_2_send nb_frame %d, TxAaQ %d", nb_frame, btif_media_cb.TxAaQ.count);
+#endif
+    while (nb_frame)
+    {
+        if (NULL == (p_buf = GKI_getpoolbuf(BTIF_MEDIA_AA_POOL_ID)))
+        {
+            APPL_TRACE_ERROR1 ("ERROR btif_media_aa_prep_sbc_2_send no buffer TxCnt %d ", btif_media_cb.TxAaQ.count);
+            return;
+        }
+
+        /* Init buffer */
+        p_buf->offset = BTIF_MEDIA_AA_SBC_OFFSET;
+        p_buf->len = 0;
+        p_buf->layer_specific = 0;
+
+        do
+        {
+            /* Write @ of allocated buffer in encoder.pu8Packet */
+            btif_media_cb.encoder.pu8Packet = (UINT8 *) (p_buf + 1) + p_buf->offset + p_buf->len;
+            /* Fill allocated buffer with 0 */
+            /* coverity[SIGN_EXTENSION] False-positive: Parameter are always in range avoiding sign extension*/
+            memset(btif_media_cb.encoder.as16PcmBuffer, 0, blocm_x_subband
+                    * btif_media_cb.encoder.s16NumOfChannels);
+
+            /* Read PCM data and upsample them if needed */
+            if (btif_media_aa_read_feeding(UIPC_CH_ID_AV_AUDIO))
+            {
+                /* SBC encode and descramble frame */
+                SBC_Encoder(&(btif_media_cb.encoder));
+                A2D_SbcChkFrInit(btif_media_cb.encoder.pu8Packet);
+                A2D_SbcDescramble(btif_media_cb.encoder.pu8Packet, btif_media_cb.encoder.u16PacketLength);
+                /* Update SBC frame length */
+                p_buf->len += btif_media_cb.encoder.u16PacketLength;
+                nb_frame--;
+                p_buf->layer_specific++;
+            }
+            else
+            {
+                /* no more pcm to read */
+                nb_frame = 0;
+
+                /* break read loop if timer was stopped (media task stopped) */
+                if ( btif_media_cb.is_tx_timer == FALSE )
+                    return;
+            }
+
+        } while (((p_buf->len + btif_media_cb.encoder.u16PacketLength) < btif_media_cb.TxAaMtuSize)
+                && (p_buf->layer_specific < 0x0F) && nb_frame);
+
+        /* coverity[SIGN_EXTENSION] False-positive: Parameter are always in range avoiding sign extension*/
+        btif_media_cb.timestamp += p_buf->layer_specific * blocm_x_subband;
+
+        /* store the time stamp in the buffer to send */
+        *((UINT32 *) (p_buf + 1)) = btif_media_cb.timestamp;
+
+        VERBOSE("TX QUEUE NOW %d", btif_media_cb.TxAaQ.count);
+
+        if (btif_media_cb.tx_flush)
+        {
+            APPL_TRACE_DEBUG0("### tx suspended, discarded frame ###");
+
+            if (btif_media_cb.TxAaQ.count > 0)
+                btif_media_flush_q(&(btif_media_cb.TxAaQ));
+
+            GKI_freebuf(p_buf);
+            return;
+        }
+
+        /* Enqueue the encoded SBC frame in AA Tx Queue */
+        GKI_enqueue(&(btif_media_cb.TxAaQ), p_buf);
+    }
+}
+
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_aa_prep_2_send
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+static void btif_media_aa_prep_2_send(UINT8 nb_frame)
+{
+    VERBOSE("btif_media_aa_prep_2_send : %d frames (queue %d)", nb_frame,
+                       btif_media_cb.TxAaQ.count);
+
+    /* Remove all the buffers not sent until there are only 4 in the queue */
+    while (btif_media_cb.TxAaQ.count >= MAX_OUTPUT_BUFFER_QUEUE_SZ)
+    {
+        APPL_TRACE_WARNING1("btif_media_aa_prep_2_send congestion buf count %d",btif_media_cb.TxAaQ.count);
+        GKI_freebuf(GKI_dequeue(&(btif_media_cb.TxAaQ)));
+    }
+
+    switch (btif_media_cb.TxTranscoding)
+    {
+    case BTIF_MEDIA_TRSCD_PCM_2_SBC:
+        btif_media_aa_prep_sbc_2_send(nb_frame);
+        break;
+
+
+    default:
+        APPL_TRACE_ERROR1("ERROR btif_media_aa_prep_2_send unsupported transcoding format 0x%x",btif_media_cb.TxTranscoding);
+        break;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_send_aa_frame
+ **
+ ** Description
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+static void btif_media_send_aa_frame(void)
+{
+    UINT8 nb_frame_2_send;
+
+    /* get the number of frame to send */
+    nb_frame_2_send = btif_get_num_aa_frame();
+
+    /* format and Q buffer to send */
+    btif_media_aa_prep_2_send(nb_frame_2_send);
+
+    /* send it */
+    VERBOSE("btif_media_send_aa_frame : send %d frames", nb_frame_2_send);
+    bta_av_ci_src_data_ready(BTA_AV_CHNL_AUDIO);
+}
+
+/*******************************************************************************
+ **
+ ** Function         btif_media_check_iop_exceptions
+ **
+ ** Description    Perform any device specific iop changes
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+void btif_media_check_iop_exceptions(UINT8 *peer_bda)
+{
+    /* disable rate scaling for pcm carkit */
+    if ((peer_bda[0] == 0x00) &&
+        (peer_bda[1] == 0x0E) &&
+        (peer_bda[2] == 0x9F))
+    {
+        BTIF_TRACE_WARNING0("detected pcm carkit, disable rate scaling");
+        btif_media_cb.scaling_disabled = TRUE;
+    }
+    else
+    {
+        btif_media_cb.scaling_disabled = FALSE;
+    }
+}
+
+
+#endif /* BTA_AV_INCLUDED == TRUE */
+
+/*******************************************************************************
+ **
+ ** Function         dump_codec_info
+ **
+ ** Description      Decode and display codec_info (for debug)
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+void dump_codec_info(unsigned char *p_codec)
+{
+    tA2D_STATUS a2d_status;
+    tA2D_SBC_CIE sbc_cie;
+
+    a2d_status = A2D_ParsSbcInfo(&sbc_cie, p_codec, FALSE);
+    if (a2d_status != A2D_SUCCESS)
+    {
+        APPL_TRACE_ERROR1("ERROR dump_codec_info A2D_ParsSbcInfo fail:%d", a2d_status);
+        return;
+    }
+
+    APPL_TRACE_DEBUG0("dump_codec_info");
+
+    if (sbc_cie.samp_freq == A2D_SBC_IE_SAMP_FREQ_16)
+    {    APPL_TRACE_DEBUG1("\tsamp_freq:%d (16000)", sbc_cie.samp_freq);}
+    else  if (sbc_cie.samp_freq == A2D_SBC_IE_SAMP_FREQ_32)
+    {    APPL_TRACE_DEBUG1("\tsamp_freq:%d (32000)", sbc_cie.samp_freq);}
+    else  if (sbc_cie.samp_freq == A2D_SBC_IE_SAMP_FREQ_44)
+    {    APPL_TRACE_DEBUG1("\tsamp_freq:%d (44.100)", sbc_cie.samp_freq);}
+    else  if (sbc_cie.samp_freq == A2D_SBC_IE_SAMP_FREQ_48)
+    {    APPL_TRACE_DEBUG1("\tsamp_freq:%d (48000)", sbc_cie.samp_freq);}
+    else
+    {    APPL_TRACE_DEBUG1("\tBAD samp_freq:%d", sbc_cie.samp_freq);}
+
+    if (sbc_cie.ch_mode == A2D_SBC_IE_CH_MD_MONO)
+    {    APPL_TRACE_DEBUG1("\tch_mode:%d (Mono)", sbc_cie.ch_mode);}
+    else  if (sbc_cie.ch_mode == A2D_SBC_IE_CH_MD_DUAL)
+    {    APPL_TRACE_DEBUG1("\tch_mode:%d (Dual)", sbc_cie.ch_mode);}
+    else  if (sbc_cie.ch_mode == A2D_SBC_IE_CH_MD_STEREO)
+    {    APPL_TRACE_DEBUG1("\tch_mode:%d (Stereo)", sbc_cie.ch_mode);}
+    else  if (sbc_cie.ch_mode == A2D_SBC_IE_CH_MD_JOINT)
+    {    APPL_TRACE_DEBUG1("\tch_mode:%d (Joint)", sbc_cie.ch_mode);}
+    else
+    {    APPL_TRACE_DEBUG1("\tBAD ch_mode:%d", sbc_cie.ch_mode);}
+
+    if (sbc_cie.block_len == A2D_SBC_IE_BLOCKS_4)
+    {    APPL_TRACE_DEBUG1("\tblock_len:%d (4)", sbc_cie.block_len);}
+    else  if (sbc_cie.block_len == A2D_SBC_IE_BLOCKS_8)
+    {    APPL_TRACE_DEBUG1("\tblock_len:%d (8)", sbc_cie.block_len);}
+    else  if (sbc_cie.block_len == A2D_SBC_IE_BLOCKS_12)
+    {    APPL_TRACE_DEBUG1("\tblock_len:%d (12)", sbc_cie.block_len);}
+    else  if (sbc_cie.block_len == A2D_SBC_IE_BLOCKS_16)
+    {    APPL_TRACE_DEBUG1("\tblock_len:%d (16)", sbc_cie.block_len);}
+    else
+    {    APPL_TRACE_DEBUG1("\tBAD block_len:%d", sbc_cie.block_len);}
+
+    if (sbc_cie.num_subbands == A2D_SBC_IE_SUBBAND_4)
+    {    APPL_TRACE_DEBUG1("\tnum_subbands:%d (4)", sbc_cie.num_subbands);}
+    else  if (sbc_cie.num_subbands == A2D_SBC_IE_SUBBAND_8)
+    {    APPL_TRACE_DEBUG1("\tnum_subbands:%d (8)", sbc_cie.num_subbands);}
+    else
+    {    APPL_TRACE_DEBUG1("\tBAD num_subbands:%d", sbc_cie.num_subbands);}
+
+    if (sbc_cie.alloc_mthd == A2D_SBC_IE_ALLOC_MD_S)
+    {    APPL_TRACE_DEBUG1("\talloc_mthd:%d (SNR)", sbc_cie.alloc_mthd);}
+    else  if (sbc_cie.alloc_mthd == A2D_SBC_IE_ALLOC_MD_L)
+    {    APPL_TRACE_DEBUG1("\talloc_mthd:%d (Loundess)", sbc_cie.alloc_mthd);}
+    else
+    {    APPL_TRACE_DEBUG1("\tBAD alloc_mthd:%d", sbc_cie.alloc_mthd);}
+
+    APPL_TRACE_DEBUG2("\tBit pool Min:%d Max:%d", sbc_cie.min_bitpool, sbc_cie.max_bitpool);
+
+}
+
diff --git a/btif/src/btif_pan.c b/btif/src/btif_pan.c
new file mode 100644
index 0000000..2f6c932
--- /dev/null
+++ b/btif/src/btif_pan.c
@@ -0,0 +1,668 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_pan.c
+ *
+ *  Description:   PAN Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+#include <hardware/bluetooth.h>
+#include <hardware/bt_pan.h>
+#include <signal.h>
+#include <ctype.h>
+#include <sys/select.h>
+#include <sys/poll.h>
+#include <sys/ioctl.h>
+#include <netinet/in.h>
+#include <netdb.h>
+#include <stdio.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <net/if.h>
+#include <linux/sockios.h>
+#include <sys/prctl.h>
+#include <linux/if.h>
+#include <linux/if_tun.h>
+#include <linux/if_ether.h>
+
+#define LOG_TAG "BTIF_PAN"
+#include "btif_common.h"
+#include "btif_util.h"
+#include "btm_api.h"
+#include "bd.h"
+
+#include "bta_api.h"
+#include "bta_pan_api.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_util.h"
+#include "btif_pan_internal.h"
+
+//#define PANU_DISABLED TRUE
+
+#if (PAN_NAP_DISABLED == TRUE) && (PANU_DISABLED == TRUE)
+#define BTPAN_LOCAL_ROLE BTPAN_ROLE_NONE
+#elif PAN_NAP_DISABLED == TRUE
+#define BTPAN_LOCAL_ROLE BTPAN_ROLE_PANU
+#elif PANU_DISABLED == TRUE
+#define BTPAN_LOCAL_ROLE BTPAN_ROLE_PANNAP
+#else
+#define BTPAN_LOCAL_ROLE (BTPAN_ROLE_PANU | BTPAN_ROLE_PANNAP)
+#endif
+
+
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("btif_pan: %s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("btif_pan: %s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define warn(fmt, ...) ALOGW ("btif_pan: ## WARNING : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("btif_pan: ## ERROR : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("btif_pan: ## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+
+btpan_cb_t btpan_cb;
+
+BD_ADDR local_addr;
+static int jni_initialized, stack_initialized;
+static bt_status_t btpan_jni_init(const btpan_callbacks_t* callbacks);
+static void btpan_jni_cleanup();
+static bt_status_t btpan_connect(const bt_bdaddr_t *bd_addr, int local_role, int remote_role);
+static bt_status_t btpan_disconnect(const bt_bdaddr_t *bd_addr);
+static bt_status_t btpan_enable(int local_role);
+static int btpan_get_local_role(void);
+
+static void btpan_tap_fd_signaled(int fd, int type, int flags, uint32_t user_id);
+static void btpan_cleanup_conn(btpan_conn_t* conn);
+static void bta_pan_callback(tBTA_PAN_EVT event, tBTA_PAN *p_data);
+/*******************************************************************************
+ **
+ ** Function         btpan_ini
+ **
+ ** Description     initializes the pan interface
+ **
+ ** Returns         bt_status_t
+ **
+ *******************************************************************************/
+static btpan_interface_t pan_if = {
+    sizeof(pan_if),
+    btpan_jni_init,
+    btpan_enable,
+    btpan_get_local_role,
+    btpan_connect,
+    btpan_disconnect,
+    btpan_jni_cleanup
+};
+btpan_interface_t *btif_pan_get_interface()
+{
+    return &pan_if;
+}
+void btif_pan_init()
+{
+    debug("jni_initialized = %d, btpan_cb.enabled:%d", jni_initialized, btpan_cb.enabled);
+    stack_initialized = TRUE;
+    if (jni_initialized && !btpan_cb.enabled)
+    {
+        debug("Enabling PAN....");
+        memset(&btpan_cb, 0, sizeof(btpan_cb));
+        btpan_cb.tap_fd = -1;
+        int i;
+        for(i = 0; i < MAX_PAN_CONNS; i++)
+            btpan_cleanup_conn(&btpan_cb.conns[i]);
+        BTA_PanEnable(bta_pan_callback);
+        btpan_cb.enabled = 1;
+        btpan_enable(BTPAN_LOCAL_ROLE);
+    }
+    debug("leaving");
+}
+static void pan_disable()
+{
+    if(btpan_cb.enabled)
+    {
+        btpan_cb.enabled = 0;
+        BTA_PanDisable();
+        if(btpan_cb.tap_fd != -1)
+        {
+            destroy_tap_read_thread();
+            btpan_tap_close(btpan_cb.tap_fd);
+            btpan_cb.tap_fd = -1;
+        }
+    }
+}
+void btif_pan_cleanup()
+{
+    if(stack_initialized)
+    {
+        //bt is shuting down, invalid all bta pan handles
+        int i;
+        for(i = 0; i < MAX_PAN_CONNS; i++)
+            btpan_cleanup_conn(&btpan_cb.conns[i]);
+        pan_disable();
+        debug("leaving");
+    }
+    stack_initialized = FALSE;
+}
+
+static btpan_callbacks_t callback;
+static bt_status_t btpan_jni_init(const btpan_callbacks_t* callbacks)
+{
+    debug("stack_initialized = %d, btpan_cb.enabled:%d", stack_initialized, btpan_cb.enabled);
+    jni_initialized = TRUE;
+    if(stack_initialized && !btpan_cb.enabled)
+        btif_pan_init();
+    callback = *callbacks;
+    debug(" leaving");
+    return BT_STATUS_SUCCESS;
+}
+
+static void btpan_jni_cleanup()
+{
+    pan_disable();
+    jni_initialized = FALSE;
+    debug("leaving");
+}
+static inline int bta_role_to_btpan(int bta_pan_role)
+{
+    int btpan_role = 0;
+    debug("bta_pan_role:0x%x", bta_pan_role);
+    if(bta_pan_role & PAN_ROLE_NAP_SERVER)
+    {
+        debug("BTPAN_ROLE_PANNAP");
+        btpan_role |= BTPAN_ROLE_PANNAP;
+    }
+    if(bta_pan_role & PAN_ROLE_CLIENT)
+    {
+        debug("BTPAN_ROLE_PANU");
+        btpan_role |= BTPAN_ROLE_PANU;
+    }
+    return btpan_role;
+}
+static inline int btpan_role_to_bta(int btpan_role)
+{
+    int bta_pan_role = PAN_ROLE_INACTIVE;
+    debug("btpan_role:0x%x", btpan_role);
+    if(btpan_role & BTPAN_ROLE_PANNAP)
+    {
+        debug("BTPAN_ROLE_PANNAP");
+        bta_pan_role |= PAN_ROLE_NAP_SERVER;
+    }
+    if(btpan_role & BTPAN_ROLE_PANU)
+    {
+        debug("BTPAN_ROLE_CLIENT");
+        bta_pan_role |= PAN_ROLE_CLIENT;
+    }
+    return bta_pan_role;
+}
+static volatile int btpan_dev_local_role;
+static tBTA_PAN_ROLE_INFO bta_panu_info = {PANU_SERVICE_NAME, 0, PAN_SECURITY};
+static tBTA_PAN_ROLE_INFO bta_pan_nap_info = {PAN_NAP_SERVICE_NAME, 0, PAN_SECURITY};
+
+static bt_status_t btpan_enable(int local_role)
+{
+    int bta_pan_role;
+    debug("local_role:%d", local_role);
+    bta_pan_role = btpan_role_to_bta(local_role);
+    BTA_PanSetRole(bta_pan_role, &bta_panu_info, NULL, &bta_pan_nap_info);
+    btpan_dev_local_role = local_role;
+    return BT_STATUS_SUCCESS;
+}
+static int btpan_get_local_role()
+{
+    debug("btpan_dev_local_role:%d", btpan_dev_local_role);
+    return btpan_dev_local_role;
+}
+static bt_status_t btpan_connect(const bt_bdaddr_t *bd_addr, int local_role, int remote_role)
+{
+    debug("local_role:%d, remote_role:%d", local_role, remote_role);
+    int bta_local_role = btpan_role_to_bta(local_role);
+    int bta_remote_role = btpan_role_to_bta(remote_role);
+    btpan_new_conn(-1, bd_addr->address, bta_local_role, bta_remote_role);
+    BTA_PanOpen((UINT8*)bd_addr->address, bta_local_role, bta_remote_role);
+    return BT_STATUS_SUCCESS;
+}
+static void btif_in_pan_generic_evt(UINT16 event, char *p_param)
+{
+    BTIF_TRACE_EVENT2("%s: event=%d", __FUNCTION__, event);
+    switch (event) {
+        case BTIF_PAN_CB_DISCONNECTING:
+        {
+            bt_bdaddr_t *bd_addr = (bt_bdaddr_t*)p_param;
+            btpan_conn_t* conn = btpan_find_conn_addr(bd_addr->address);
+            int btpan_conn_local_role;
+            int btpan_remote_role;
+            asrt(conn != NULL);
+            if (conn) {
+                btpan_conn_local_role = bta_role_to_btpan(conn->local_role);
+                btpan_remote_role = bta_role_to_btpan(conn->remote_role);
+                callback.connection_state_cb(BTPAN_STATE_DISCONNECTING, BT_STATUS_SUCCESS,
+                        (const bt_bdaddr_t*)conn->peer, btpan_conn_local_role, btpan_remote_role);
+            }
+        } break;
+        default:
+        {
+            BTIF_TRACE_WARNING2("%s : Unknown event 0x%x", __FUNCTION__, event);
+        }
+        break;
+    }
+}
+static bt_status_t btpan_disconnect(const bt_bdaddr_t *bd_addr)
+{
+    debug("in");
+    btpan_conn_t* conn = btpan_find_conn_addr(bd_addr->address);
+    if(conn && conn->handle >= 0)
+    {
+        BTA_PanClose(conn->handle);
+        /* Inform the application that the disconnect has been initiated successfully */
+        btif_transfer_context(btif_in_pan_generic_evt, BTIF_PAN_CB_DISCONNECTING,
+                              (char *)bd_addr, sizeof(bt_bdaddr_t), NULL);
+        return BT_STATUS_SUCCESS;
+    }
+    return BT_STATUS_FAIL;
+}
+static int pth = -1;
+void create_tap_read_thread(int tap_fd)
+{
+    debug("in");
+    if(pth < 0)
+    {
+        pth = btsock_thread_create(btpan_tap_fd_signaled, NULL);
+        if(pth >= 0)
+            btsock_thread_add_fd(pth, tap_fd, 0, SOCK_THREAD_FD_RD, 0);
+    }
+}
+void destroy_tap_read_thread(void)
+{
+    if(pth >= 0)
+    {
+        btsock_thread_exit(pth);
+        pth = -1;
+    }
+}
+static int tap_if_up(const char *devname, BD_ADDR addr)
+{
+    struct ifreq ifr;
+    int sk, err;
+
+    sk = socket(AF_INET, SOCK_DGRAM, 0);
+
+    //set mac addr
+    memset(&ifr, 0, sizeof(ifr));
+    strncpy(ifr.ifr_name, devname, IFNAMSIZ - 1);
+    err = ioctl(sk, SIOCGIFHWADDR, &ifr);
+    if(err < 0)
+    {
+        error("Could not get network hardware for interface:%s, errno:%s", devname, strerror(errno));
+        close(sk);
+        return -1;
+    }
+    debug("found mac address for interface:%s = %02x:%02x:%02x:%02x:%02x:%02x", devname,
+            ifr.ifr_hwaddr.sa_data[0], ifr.ifr_hwaddr.sa_data[1], ifr.ifr_hwaddr.sa_data[2],
+            ifr.ifr_hwaddr.sa_data[3], ifr.ifr_hwaddr.sa_data[4], ifr.ifr_hwaddr.sa_data[5]);
+    strncpy(ifr.ifr_name, devname, IFNAMSIZ - 1);
+    memcpy(ifr.ifr_hwaddr.sa_data, addr, 6);
+    debug("setting bt address for interface:%s = %02x:%02x:%02x:%02x:%02x:%02x", devname,
+            ifr.ifr_hwaddr.sa_data[0], ifr.ifr_hwaddr.sa_data[1], ifr.ifr_hwaddr.sa_data[2],
+            ifr.ifr_hwaddr.sa_data[3], ifr.ifr_hwaddr.sa_data[4], ifr.ifr_hwaddr.sa_data[5]);
+
+    err = ioctl(sk, SIOCSIFHWADDR, (caddr_t)&ifr);
+
+    if (err < 0) {
+        error("Could not set bt address for interface:%s, errno:%s", devname, strerror(errno));
+        close(sk);
+        return -1;
+    }
+
+    //bring it up
+    memset(&ifr, 0, sizeof(ifr));
+    strncpy(ifr.ifr_name, devname, IF_NAMESIZE - 1);
+
+    ifr.ifr_flags |= IFF_UP;
+    ifr.ifr_flags |= IFF_MULTICAST;
+
+    err = ioctl(sk, SIOCSIFFLAGS, (caddr_t) &ifr);
+
+
+    if (err < 0) {
+        error("Could not bring up network interface:%s, errno:%d", devname, errno);
+        close(sk);
+        return -1;
+    }
+    close(sk);
+    debug("network interface: %s is up", devname);
+    return 0;
+}
+
+static int tap_if_down(const char *devname)
+{
+    struct ifreq ifr;
+    int sk, err;
+
+    sk = socket(AF_INET, SOCK_DGRAM, 0);
+
+    memset(&ifr, 0, sizeof(ifr));
+    strncpy(ifr.ifr_name, devname, IF_NAMESIZE - 1);
+
+    ifr.ifr_flags &= ~IFF_UP;
+
+    err = ioctl(sk, SIOCSIFFLAGS, (caddr_t) &ifr);
+
+    close(sk);
+
+    return 0;
+}
+int btpan_tap_open()
+{
+    debug("in");
+    struct ifreq ifr;
+    int fd, err;
+    const char *clonedev = "/dev/tun";
+
+    /* open the clone device */
+
+    //system("insmod /system/lib/modules/tun.ko");
+    if( (fd = open(clonedev, O_RDWR)) < 0 ) {
+
+        debug("could not open %s, err:%d", clonedev, errno);
+        return fd;
+    }
+
+    memset(&ifr, 0, sizeof(ifr));
+    ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
+
+    strncpy(ifr.ifr_name, TAP_IF_NAME, IFNAMSIZ);
+
+    /* try to create the device */
+    if( (err = ioctl(fd, TUNSETIFF, (void *) &ifr)) < 0 )//|| tap_setup_ip(TAP_IF_NAME) == FALSE)
+    {
+        debug("ioctl error:%d, errno:%s", err, strerror(errno));
+        close(fd);
+        return err;
+    }
+    BTM_GetLocalDeviceAddr (local_addr);
+    if(tap_if_up(TAP_IF_NAME, local_addr) == 0)
+    {
+        return fd;
+    }
+    error("can not bring up tap interface:%s", TAP_IF_NAME);
+    close(fd);
+    return -1;
+}
+int btpan_tap_send(int tap_fd, const BD_ADDR src, const BD_ADDR dst, UINT16 proto, const char* buf,
+                    UINT16 len, BOOLEAN ext, BOOLEAN forward)
+{
+    debug("in");
+    debug("SRC ADDR = %02x:%02x:%02x:%02x:%02x:%02x",
+            src[0], src[1], src[2], src[3],
+            src[4], src[5]);
+    debug("DST ADDR = %02x:%02x:%02x:%02x:%02x:%02x",
+            dst[0], dst[1], dst[2], dst[3],
+            dst[4], dst[5]);
+
+    debug("Protocol = 0x%x", proto);
+    debug("Ext = 0x%x", ext);
+    debug("Forward = 0x%x", forward);
+    debug("Len = %d", len);
+    if(tap_fd != -1)
+    {
+        tETH_HDR eth_hdr;
+        //if(is_empty_eth_addr(dst))
+        //    memcpy(&eth_hdr.h_dest, local_addr, ETH_ADDR_LEN);
+        //else
+        memcpy(&eth_hdr.h_dest, dst, ETH_ADDR_LEN);
+        memcpy(&eth_hdr.h_src, src, ETH_ADDR_LEN);
+        eth_hdr.h_proto = htons(proto);
+        char packet[2000];
+        memcpy(packet, &eth_hdr, sizeof(tETH_HDR));
+        if(len > 2000)
+        {
+            ALOGE("btpan_tap_send eth packet size:%d is exceeded limit!", len);
+            return -1;
+        }
+        memcpy(packet + sizeof(tETH_HDR), buf, len);
+
+        /* Send data to network interface */
+        //btnet_send(btpan_cb.conn[i].sock.sock, &buffer, (len + sizeof(tETH_HDR)));
+        //dump_bin("packet to network", packet, len + sizeof(tETH_HDR));
+        int ret = write(tap_fd, packet, len + sizeof(tETH_HDR));
+        debug("ret:%d", ret);
+        return ret;
+    }
+    return -1;
+
+}
+int btpan_tap_close(int fd)
+{
+    debug("in");
+    tap_if_down(TAP_IF_NAME);
+    close(fd);
+    return 0;
+}
+btpan_conn_t * btpan_find_conn_handle(UINT16 handle)
+{
+    int i;
+    for(i = 0; i < MAX_PAN_CONNS; i++)
+        if(btpan_cb.conns[i].handle == handle)
+            return &btpan_cb.conns[i];
+    return NULL;
+}
+btpan_conn_t* btpan_find_conn_addr(const BD_ADDR addr)
+{
+    int i;
+    for(i = 0; i < MAX_PAN_CONNS; i++)
+        if(memcmp(btpan_cb.conns[i].peer, addr, sizeof(BD_ADDR)) == 0)
+            return &btpan_cb.conns[i];
+    return NULL;
+}
+static void btpan_cleanup_conn(btpan_conn_t* conn)
+{
+    if(conn)
+    {
+        conn->handle = -1;
+        conn->state = -1;
+        memset(&conn->peer, 0, sizeof(conn->peer));
+        memset(&conn->eth_addr, 0, sizeof(conn->eth_addr));
+        conn->local_role = conn->remote_role = 0;
+    }
+}
+btpan_conn_t* btpan_new_conn(int handle, const BD_ADDR addr, int local_role, int remote_role )
+{
+    int i;
+    debug("in");
+    for(i = 0; i < MAX_PAN_CONNS; i++)
+    {
+        debug("conns[%d]:%d", i, btpan_cb.conns[i].handle);
+        if(btpan_cb.conns[i].handle == -1)
+        {
+            debug("handle:%d, local_role:%d, remote_role:%d", handle, local_role, remote_role);
+
+            btpan_cb.conns[i].handle = handle;
+            bdcpy(btpan_cb.conns[i].peer, addr);
+            btpan_cb.conns[i].local_role = local_role;
+            btpan_cb.conns[i].remote_role = remote_role;
+            return &btpan_cb.conns[i];
+        }
+    }
+    debug("MAX_PAN_CONNS:%d exceeded, return NULL as failed", MAX_PAN_CONNS);
+    return NULL;
+}
+
+void btpan_close_handle(btpan_conn_t *p)
+{
+    debug("btpan_close_handle : close handle %d", p->handle);
+    p->handle = -1;
+    p->local_role = -1;
+    p->remote_role = -1;
+    memset(&p->peer, 0, 6);
+}
+static inline int should_forward(tETH_HDR* hdr)
+{
+    if(ntohs(hdr->h_proto) == ETH_P_IP || ntohs(hdr->h_proto) == ETH_P_ARP)
+        return TRUE;
+    debug("unknown proto:%x", ntohs(hdr->h_proto));
+    return FALSE;
+}
+extern void bta_pan_ci_rx_write(UINT16 handle, BD_ADDR dst, BD_ADDR src, UINT16 protocol,
+        UINT8 *p_data, UINT16 len, BOOLEAN ext);
+static void forward_bnep(tETH_HDR* eth_hdr, char * packet, int size)
+{
+    int broadcast = eth_hdr->h_dest[0] & 1;
+    int i;
+    for(i = 0; i < MAX_PAN_CONNS; i++)
+    {
+        UINT16 handle = btpan_cb.conns[i].handle;
+        if(handle != (UINT16)-1 &&
+                (broadcast || memcmp(btpan_cb.conns[i].eth_addr, eth_hdr->h_dest, sizeof(BD_ADDR)) == 0
+                 || memcmp(btpan_cb.conns[i].peer, eth_hdr->h_dest, sizeof(BD_ADDR)) == 0))
+        {
+            debug("calling bta_pan_ci_rx_write, handle:%d", handle);
+            bta_pan_ci_rx_write(handle, eth_hdr->h_dest, eth_hdr->h_src,
+                    ntohs(eth_hdr->h_proto), (UINT8*)packet, size, 0);
+            break;
+        }
+    }
+}
+
+static void bta_pan_callback_transfer(UINT16 event, char *p_param)
+{
+    tBTA_PAN *p_data = (tBTA_PAN *)p_param;
+    switch(event)
+    {
+        case BTA_PAN_ENABLE_EVT:
+            debug("BTA_PAN_ENABLE_EVT");
+            break;
+        case BTA_PAN_SET_ROLE_EVT:
+            {
+                int btpan_role = bta_role_to_btpan(p_data->set_role.role);
+                bt_status_t status = p_data->set_role.status == BTA_PAN_SUCCESS ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+                btpan_control_state_t state = btpan_role == 0 ? BTPAN_STATE_DISABLED : BTPAN_STATE_ENABLED;
+                callback.control_state_cb(state, btpan_role, status, TAP_IF_NAME);
+                break;
+            }
+        case BTA_PAN_OPENING_EVT:
+            {
+                btpan_conn_t* conn;
+                bdstr_t bds;
+                bd2str((bt_bdaddr_t*)p_data->opening.bd_addr, &bds);
+                debug("BTA_PAN_OPENING_EVT handle %d, addr: %s", p_data->opening.handle, bds);
+                conn = btpan_find_conn_addr(p_data->opening.bd_addr);
+
+                asrt(conn != NULL);
+                if (conn)
+                {
+                    conn->handle = p_data->opening.handle;
+                    int btpan_conn_local_role = bta_role_to_btpan(conn->local_role);
+                    int btpan_remote_role = bta_role_to_btpan(conn->remote_role);
+                    callback.connection_state_cb(BTPAN_STATE_CONNECTING, BT_STATUS_SUCCESS,
+                            (const bt_bdaddr_t*)p_data->opening.bd_addr, btpan_conn_local_role, btpan_remote_role);
+                }
+                else
+                    error("connection not found");
+                break;
+            }
+        case BTA_PAN_OPEN_EVT:
+            {
+                debug("BTA_PAN_OPEN_EVT, open status:%d, bd_addr = [%02X:%02X:%02X:%02X:%02X:%02X]",
+                        p_data->open.status,
+                        p_data->open.bd_addr[0], p_data->open.bd_addr[1], p_data->open.bd_addr[2],
+                        p_data->open.bd_addr[3], p_data->open.bd_addr[4], p_data->open.bd_addr[5]);
+                btpan_connection_state_t state;
+                bt_status_t status;
+                if(p_data->open.status == BTA_PAN_SUCCESS)
+                {
+                    state = BTPAN_STATE_CONNECTED;
+                    status = BT_STATUS_SUCCESS;
+                }
+                else
+                {
+                    state = BTPAN_STATE_DISCONNECTED;
+                    status = BT_STATUS_FAIL;
+                }
+                btpan_conn_t* conn = btpan_find_conn_handle(p_data->open.handle);
+                debug("BTA_PAN_OPEN_EVT handle:%d, conn:%p",  p_data->open.handle, conn);
+                debug("conn bta local_role:%d, bta remote role:%d", conn->local_role, conn->remote_role);
+                int btpan_conn_local_role = bta_role_to_btpan(p_data->open.local_role);
+                debug("bta local_role:%d, bta remote role:%d", p_data->open.local_role, p_data->open.peer_role);
+                int btpan_remote_role = bta_role_to_btpan(p_data->open.peer_role);
+                callback.connection_state_cb(state, status, (const bt_bdaddr_t*)p_data->open.bd_addr,
+                        btpan_conn_local_role, btpan_remote_role);
+                break;
+            }
+        case BTA_PAN_CLOSE_EVT:
+            {
+                btpan_conn_t* conn = btpan_find_conn_handle(p_data->close.handle);
+
+                ALOGI("%s: event = BTA_PAN_CLOSE_EVT handle %d", __FUNCTION__, p_data->close.handle);
+
+                if(conn && conn->handle >= 0)
+                {
+                    debug("BTA_PAN_CLOSE_EVT, conn local_role:%d, remote_role:%d", conn->local_role, conn->remote_role);
+                    int btpan_conn_local_role = bta_role_to_btpan(conn->local_role);
+                    int btpan_remote_role = bta_role_to_btpan(conn->remote_role);
+                    callback.connection_state_cb(BTPAN_STATE_DISCONNECTED, 0, (const bt_bdaddr_t*)conn->peer,
+                            btpan_conn_local_role, btpan_remote_role);
+                    btpan_cleanup_conn(conn);
+                }
+                else
+                    error("pan handle not found (%d)", p_data->close.handle);
+                break;
+            }
+        default:
+            debug("Unknown pan event %d", event);
+            break;
+    }
+}
+
+static void bta_pan_callback(tBTA_PAN_EVT event, tBTA_PAN *p_data)
+{
+    btif_transfer_context(bta_pan_callback_transfer, event, (char*)p_data, sizeof(tBTA_PAN), NULL);
+}
+#define MAX_PACKET_SIZE 2000
+static void btpan_tap_fd_signaled(int fd, int type, int flags, uint32_t user_id)
+{
+    char packet[MAX_PACKET_SIZE];
+    tETH_HDR eth_hdr;
+    if(flags & SOCK_THREAD_FD_EXCEPTION)
+    {
+        error("pan tap fd:%d exception", fd);
+    }
+    else if(flags & SOCK_THREAD_FD_RD)
+    {
+        debug("tab fd read trigged,  data");
+        int size = read(fd, packet, MAX_PACKET_SIZE);
+        debug("tap fd read trigged, read size:%d", size);
+        memcpy(&eth_hdr, &packet, sizeof(tETH_HDR));
+        debug("eth src = %02x:%02x:%02x:%02x:%02x:%02x",
+                eth_hdr.h_src[0],  eth_hdr.h_src[1], eth_hdr.h_src[2], eth_hdr.h_src[3],
+                eth_hdr.h_src[4], eth_hdr.h_src[5]);
+        debug("eth dest = %02x:%02x:%02x:%02x:%02x:%02x",
+                eth_hdr.h_dest[0], eth_hdr.h_dest[1], eth_hdr.h_dest[2], eth_hdr.h_dest[3],
+                eth_hdr.h_dest[4], eth_hdr.h_dest[5]);
+        //dump_bin("eth packet received", packet, size);
+        if(should_forward(&eth_hdr))
+        {
+            forward_bnep(&eth_hdr, packet + sizeof(tETH_HDR),  size - sizeof(tETH_HDR));
+        }
+        btsock_thread_add_fd(pth, fd, 0, SOCK_THREAD_FD_RD | SOCK_THREAD_ADD_FD_SYNC, 0);
+    }
+}
+
+
diff --git a/btif/src/btif_profile_queue.c b/btif/src/btif_profile_queue.c
new file mode 100644
index 0000000..4af3b53
--- /dev/null
+++ b/btif/src/btif_profile_queue.c
@@ -0,0 +1,187 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*******************************************************************************
+ *
+ *  Filename:      btif_profile_queue.c
+ *
+ *  Description:   Bluetooth remote device connection queuing implementation.
+ *
+ ******************************************************************************/
+
+#include <hardware/bluetooth.h>
+
+#define LOG_TAG "BTIF_QUEUE"
+#include "btif_common.h"
+#include "btif_profile_queue.h"
+#include "gki.h"
+
+/*******************************************************************************
+**  Local type definitions
+*******************************************************************************/
+
+typedef enum {
+  BTIF_QUEUE_CONNECT_EVT,
+  BTIF_QUEUE_ADVANCE_EVT
+} btif_queue_event_t;
+
+typedef struct connect_node_tag
+{
+    bt_bdaddr_t bda;
+    uint16_t uuid;
+    uint16_t busy;
+    void *p_cb;
+    struct connect_node_tag *p_next;
+} __attribute__((packed))connect_node_t;
+
+
+/*******************************************************************************
+**  Static variables
+*******************************************************************************/
+
+static connect_node_t *connect_queue;
+
+
+/*******************************************************************************
+**  Queue helper functions
+*******************************************************************************/
+
+static void queue_int_add(connect_node_t *p_param)
+{
+    connect_node_t *p_list = connect_queue;
+    connect_node_t *p_node = GKI_getbuf(sizeof(connect_node_t));
+    ASSERTC(p_node != NULL, "Failed to allocate new list node", 0);
+
+    memcpy(p_node, p_param, sizeof(connect_node_t));
+
+    if (connect_queue == NULL)
+    {
+        connect_queue = p_node;
+        return;
+    }
+
+    while (p_list->p_next)
+        p_list = p_list->p_next;
+    p_list->p_next = p_node;
+}
+
+static void queue_int_advance()
+{
+    connect_node_t *p_head = connect_queue;
+    if (connect_queue == NULL)
+        return;
+
+    connect_queue = connect_queue->p_next;
+    GKI_freebuf(p_head);
+}
+
+static bt_status_t queue_int_connect_next()
+{
+    connect_node_t* p_head = connect_queue;
+
+    if (p_head == NULL)
+        return BT_STATUS_FAIL;
+
+    /* If the queue is currently busy, we return  success anyway,
+     * since the connection has been queued... */
+    if (p_head->busy != FALSE)
+        return BT_STATUS_SUCCESS;
+
+    p_head->busy = TRUE;
+    return (*(btif_connect_cb_t*)p_head->p_cb)(&p_head->bda);
+}
+
+static void queue_int_handle_evt(UINT16 event, char *p_param)
+{
+    switch(event)
+    {
+        case BTIF_QUEUE_CONNECT_EVT:
+            queue_int_add((connect_node_t*)p_param);
+            break;
+
+        case BTIF_QUEUE_ADVANCE_EVT:
+            queue_int_advance();
+            break;
+    }
+
+    queue_int_connect_next();
+}
+
+/*******************************************************************************
+**
+** Function         btif_queue_connect
+**
+** Description      Add a new connection to the queue and trigger the next
+**                  scheduled connection.
+**
+** Returns          BT_STATUS_SUCCESS if successful
+**
+*******************************************************************************/
+bt_status_t btif_queue_connect(uint16_t uuid, const bt_bdaddr_t *bda,
+                        btif_connect_cb_t *connect_cb)
+{
+    connect_node_t node;
+    memset(&node, 0, sizeof(connect_node_t));
+    memcpy(&(node.bda), bda, sizeof(bt_bdaddr_t));
+    node.uuid = uuid;
+    node.p_cb = connect_cb;
+
+    return btif_transfer_context(queue_int_handle_evt, BTIF_QUEUE_CONNECT_EVT,
+                          (char*)&node, sizeof(connect_node_t), NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btif_queue_advance
+**
+** Description      Clear the queue's busy status and advance to the next
+**                  scheduled connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btif_queue_advance()
+{
+    btif_transfer_context(queue_int_handle_evt, BTIF_QUEUE_ADVANCE_EVT,
+                          NULL, 0, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_queue_release
+**
+** Description      Free up all the queue nodes and set the queue head to NULL
+**
+** Returns          void
+**
+*******************************************************************************/
+void btif_queue_release()
+{
+    connect_node_t *current = connect_queue;
+
+    while (current != NULL)
+    {
+         connect_node_t *next = current->p_next;
+         GKI_freebuf(current);
+         current = next;
+    }
+
+    connect_queue = NULL;
+}
+
diff --git a/btif/src/btif_rc.c b/btif/src/btif_rc.c
new file mode 100644
index 0000000..68ddf5b
--- /dev/null
+++ b/btif/src/btif_rc.c
@@ -0,0 +1,492 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+/*****************************************************************************
+ *
+ *  Filename:      btif_rc.c
+ *
+ *  Description:   Bluetooth AVRC implementation
+ *
+ *****************************************************************************/
+#include <hardware/bluetooth.h>
+#include <fcntl.h>
+#include "bta_api.h"
+#include "bta_av_api.h"
+#include "avrc_defs.h"
+#include "bd.h"
+#include "gki.h"
+
+#define LOG_TAG "BTIF_RC"
+#include "btif_common.h"
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+#define BTIF_RC_USE_UINPUT TRUE
+#include "uinput.h"
+
+/* cod value for Headsets */
+#define COD_AV_HEADSETS        0x0404
+
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+typedef struct {
+    BOOLEAN                     rc_connected;
+    UINT8                       rc_handle;
+    BD_ADDR                     rc_addr;
+    UINT16                      rc_pending_play;
+} btif_rc_cb_t;
+
+#ifdef BTIF_RC_USE_UINPUT
+#define MAX_UINPUT_PATHS 3
+static const char* uinput_dev_path[] =
+                       {"/dev/uinput", "/dev/input/uinput", "/dev/misc/uinput" };
+static int uinput_fd = -1;
+
+static int  send_event (int fd, uint16_t type, uint16_t code, int32_t value);
+static void send_key (int fd, uint16_t key, int pressed);
+static int  uinput_driver_check();
+static int  uinput_create(char *name);
+static int  init_uinput (void);
+static void close_uinput (void);
+
+static struct {
+    const char *name;
+    uint8_t avrcp;
+    uint16_t mapped_id;
+    uint8_t release_quirk;
+} key_map[] = {
+    { "PLAY",         AVRC_ID_PLAY,     KEY_PLAYCD,       1 },
+    { "STOP",         AVRC_ID_STOP,     KEY_STOPCD,       0 },
+    { "PAUSE",        AVRC_ID_PAUSE,    KEY_PAUSECD,      1 },
+    { "FORWARD",      AVRC_ID_FORWARD,  KEY_NEXTSONG,     0 },
+    { "BACKWARD",     AVRC_ID_BACKWARD, KEY_PREVIOUSSONG, 0 },
+    { "REWIND",       AVRC_ID_REWIND,   KEY_REWIND,       0 },
+    { "FAST FORWARD", AVRC_ID_FAST_FOR, KEY_FORWARD,      0 },
+    { NULL,           0,                0,                0 }
+};
+#endif /* BTIF_RC_USE_UINPUT */
+
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+static btif_rc_cb_t btif_rc_cb;
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**  Externs
+******************************************************************************/
+extern BOOLEAN btif_hf_call_terminated_recently();
+extern BOOLEAN check_cod(const bt_bdaddr_t *remote_bdaddr, uint32_t cod);
+extern BOOLEAN btif_av_is_connected(void);
+
+/*****************************************************************************
+**  Functions
+******************************************************************************/
+
+
+#ifdef BTIF_RC_USE_UINPUT
+/*****************************************************************************
+**   Local uinput helper functions
+******************************************************************************/
+int send_event (int fd, uint16_t type, uint16_t code, int32_t value)
+{
+    struct uinput_event event;
+
+    memset(&event, 0, sizeof(event));
+    event.type  = type;
+    event.code  = code;
+    event.value = value;
+
+    return write(fd, &event, sizeof(event));
+}
+
+void send_key (int fd, uint16_t key, int pressed)
+{
+    if (fd < 0) {
+        return;
+    }
+
+    BTIF_TRACE_DEBUG3("AVRCP: Send key %d (%d) fd=%d", key, pressed, fd);
+    send_event(fd, EV_KEY, key, pressed);
+    send_event(fd, EV_SYN, SYN_REPORT, 0);
+}
+
+/************** uinput related functions **************/
+int uinput_driver_check()
+{
+    uint32_t i;
+    for (i=0; i < MAX_UINPUT_PATHS; i++)
+    {
+        if (access(uinput_dev_path[i], O_RDWR) == 0) {
+           return 0;
+        }
+    }
+    BTIF_TRACE_ERROR1("%s ERROR: uinput device is not in the system", __FUNCTION__);
+    return -1;
+}
+
+int uinput_create(char *name)
+{
+    struct uinput_dev dev;
+    int fd, err, x = 0;
+
+    for(x=0; x < MAX_UINPUT_PATHS; x++)
+    {
+        fd = open(uinput_dev_path[x], O_RDWR);
+        if (fd < 0)
+            continue;
+        break;
+    }
+    if (x == MAX_UINPUT_PATHS) {
+        BTIF_TRACE_ERROR1("%s ERROR: uinput device open failed", __FUNCTION__);
+        return -1;
+    }
+    memset(&dev, 0, sizeof(dev));
+    if (name)
+        strncpy(dev.name, name, UINPUT_MAX_NAME_SIZE);
+
+    dev.id.bustype = BUS_BLUETOOTH;
+    dev.id.vendor  = 0x0000;
+    dev.id.product = 0x0000;
+    dev.id.version = 0x0000;
+
+    if (write(fd, &dev, sizeof(dev)) < 0) {
+        BTIF_TRACE_ERROR1("%s Unable to write device information", __FUNCTION__);
+        close(fd);
+        return -1;
+    }
+
+    ioctl(fd, UI_SET_EVBIT, EV_KEY);
+    ioctl(fd, UI_SET_EVBIT, EV_REL);
+    ioctl(fd, UI_SET_EVBIT, EV_SYN);
+
+    for (x = 0; key_map[x].name != NULL; x++)
+        ioctl(fd, UI_SET_KEYBIT, key_map[x].mapped_id);
+
+    for(x = 0; x < KEY_MAX; x++)
+        ioctl(fd, UI_SET_KEYBIT, x);
+
+    if (ioctl(fd, UI_DEV_CREATE, NULL) < 0) {
+        BTIF_TRACE_ERROR1("%s Unable to create uinput device", __FUNCTION__);
+        close(fd);
+        return -1;
+    }
+    return fd;
+}
+
+int init_uinput (void)
+{
+    char *name = "AVRCP";
+
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    uinput_fd = uinput_create(name);
+    if (uinput_fd < 0) {
+        BTIF_TRACE_ERROR3("%s AVRCP: Failed to initialize uinput for %s (%d)",
+                          __FUNCTION__, name, uinput_fd);
+    } else {
+        BTIF_TRACE_DEBUG3("%s AVRCP: Initialized uinput for %s (fd=%d)",
+                          __FUNCTION__, name, uinput_fd);
+    }
+    return uinput_fd;
+}
+
+void close_uinput (void)
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    if (uinput_fd > 0) {
+        ioctl(uinput_fd, UI_DEV_DESTROY);
+
+        close(uinput_fd);
+        uinput_fd = -1;
+    }
+}
+#endif // BTA_AVRCP_FORCE_USE_UINPUT
+
+const char *dump_rc_event_name(tBTA_AV_EVT event)
+{
+   switch(event) {
+        case BTA_AV_RC_OPEN_EVT: return "BTA_AV_RC_OPEN_EVT";
+        case BTA_AV_RC_CLOSE_EVT: return "BTA_AV_RC_CLOSE_EVT";
+        case BTA_AV_REMOTE_CMD_EVT: return "BTA_AV_REMOTE_CMD_EVT";
+        case BTA_AV_REMOTE_RSP_EVT: return "BTA_AV_REMOTE_RSP_EVT";
+        case BTA_AV_VENDOR_CMD_EVT: return "BTA_AV_VENDOR_CMD_EVT";
+        case BTA_AV_VENDOR_RSP_EVT: return "BTA_AV_VENDOR_RSP_EVT";
+        default: return "UNKNOWN_EVENT";
+   }
+}
+
+/***************************************************************************
+ *  Function       handle_rc_connect
+ *
+ *  - Argument:    tBTA_AV_RC_OPEN 	RC open data structure
+ *
+ *  - Description: RC connection event handler
+ *
+ ***************************************************************************/
+void handle_rc_connect (tBTA_AV_RC_OPEN *p_rc_open)
+{
+    BTIF_TRACE_DEBUG2("%s: rc_handle: %d", __FUNCTION__, p_rc_open->rc_handle);
+
+#ifdef BTIF_RC_USE_UINPUT
+    init_uinput();
+#endif
+
+    memcpy(btif_rc_cb.rc_addr, p_rc_open->peer_addr, sizeof(BD_ADDR));
+    btif_rc_cb.rc_connected = TRUE;
+    btif_rc_cb.rc_handle = p_rc_open->rc_handle;
+}
+
+/***************************************************************************
+ *  Function       handle_rc_disconnect
+ *
+ *  - Argument:    tBTA_AV_RC_CLOSE 	RC close data structure
+ *
+ *  - Description: RC disconnection event handler
+ *
+ ***************************************************************************/
+void handle_rc_disconnect (tBTA_AV_RC_CLOSE *p_rc_close)
+{
+    BTIF_TRACE_DEBUG2("%s: rc_handle: %d", __FUNCTION__, p_rc_close->rc_handle);
+
+    btif_rc_cb.rc_handle = 0;
+    btif_rc_cb.rc_connected = FALSE;
+    memset(btif_rc_cb.rc_addr, 0, sizeof(BD_ADDR));
+#ifdef BTIF_RC_USE_UINPUT
+    close_uinput();
+#endif /* BTIF_RC_USE_UINPUT */
+}
+
+/***************************************************************************
+ *  Function       handle_rc_passthrough_cmd
+ *
+ *  - Argument:    tBTA_AV_RC rc_id   remote control command ID
+ *                 tBTA_AV_STATE key_state status of key press
+ *
+ *  - Description: Remote control command handler
+ *
+ ***************************************************************************/
+void handle_rc_passthrough_cmd ( tBTA_AV_REMOTE_CMD *p_remote_cmd)
+{
+    const char *status;
+    int pressed, i;
+
+    btif_rc_cb.rc_handle = p_remote_cmd->rc_handle;
+
+    /* If AVRC is open and peer sends PLAY but there is no AVDT, then we queue-up this PLAY */
+    if (p_remote_cmd)
+    {
+        /* queue AVRC PLAY if GAVDTP Open notification to app is pending (2 second timer) */
+        if ((p_remote_cmd->rc_id == BTA_AV_RC_PLAY) && (!btif_av_is_connected()))
+        {
+            if (p_remote_cmd->key_state == AVRC_STATE_PRESS)
+            {
+                APPL_TRACE_WARNING1("%s: AVDT not open, queuing the PLAY command", __FUNCTION__);
+                btif_rc_cb.rc_pending_play = TRUE;
+            }
+            return;
+        }
+
+        if ((p_remote_cmd->rc_id == BTA_AV_RC_PAUSE) && (btif_rc_cb.rc_pending_play))
+        {
+            APPL_TRACE_WARNING1("%s: Clear the pending PLAY on PAUSE received", __FUNCTION__);
+            btif_rc_cb.rc_pending_play = FALSE;
+            return;
+        }
+    }
+    if (p_remote_cmd->key_state == AVRC_STATE_RELEASE) {
+        status = "released";
+        pressed = 0;
+    } else {
+        status = "pressed";
+        pressed = 1;
+    }
+
+    /* If this is Play/Pause command (press or release)  before processing, check the following
+     * a voice call has ended recently
+     * the remote device is not of type headset
+     * If the above conditions meet, drop the Play/Pause command
+     * This fix is to interop with certain carkits which sends an automatic  PLAY  or PAUSE
+     * commands right after call ends
+     */
+    if((p_remote_cmd->rc_id == BTA_AV_RC_PLAY || p_remote_cmd->rc_id == BTA_AV_RC_PAUSE)&&
+       (btif_hf_call_terminated_recently() == TRUE) &&
+       (check_cod( (const bt_bdaddr_t*)&(btif_rc_cb.rc_addr), COD_AV_HEADSETS) != TRUE))
+    {
+        BTIF_TRACE_DEBUG2("%s:Dropping the play/Pause command received right after call end cmd:%d",
+                           __FUNCTION__,p_remote_cmd->rc_id);
+        return;
+    }
+
+    for (i = 0; key_map[i].name != NULL; i++) {
+        if (p_remote_cmd->rc_id == key_map[i].avrcp) {
+            BTIF_TRACE_DEBUG3("%s: %s %s", __FUNCTION__, key_map[i].name, status);
+
+           /* MusicPlayer uses a long_press_timeout of 1 second for PLAYPAUSE button
+            * and maps that to autoshuffle. So if for some reason release for PLAY/PAUSE
+            * comes 1 second after the press, the MediaPlayer UI goes into a bad state.
+            * The reason for the delay could be sniff mode exit or some AVDTP procedure etc.
+            * The fix is to generate a release right after the press and drown the 'actual'
+            * release.
+            */
+            if ((key_map[i].release_quirk == 1) && (pressed == 0))
+            {
+                BTIF_TRACE_DEBUG2("%s: AVRC %s Release Faked earlier, drowned now",
+                                  __FUNCTION__, key_map[i].name);
+                return;
+            }
+#ifdef BTIF_RC_USE_UINPUT
+            send_key(uinput_fd, key_map[i].mapped_id, pressed);
+#endif
+            if ((key_map[i].release_quirk == 1) && (pressed == 1))
+            {
+                GKI_delay(30); // 30ms
+                BTIF_TRACE_DEBUG2("%s: AVRC %s Release quirk enabled, send release now",
+                                  __FUNCTION__, key_map[i].name);
+#ifdef BTIF_RC_USE_UINPUT
+                send_key(uinput_fd, key_map[i].mapped_id, 0);
+#endif
+            }
+            break;
+        }
+    }
+
+    if (key_map[i].name == NULL)
+        BTIF_TRACE_ERROR3("%s AVRCP: unknown button 0x%02X %s", __FUNCTION__,
+                        p_remote_cmd->rc_id, status);
+}
+
+/*****************************************************************************
+**
+** Function        btif_rc_init
+**
+** Description     Initialize RC
+**
+** Returns         Returns 0 on success, -1 otherwise
+**
+*******************************************************************************/
+int btif_rc_init()
+{
+    BTIF_TRACE_DEBUG1("%s", __FUNCTION__);
+    memset (&btif_rc_cb, 0, sizeof(btif_rc_cb));
+
+#ifdef BTIF_RC_USE_UINPUT
+    return uinput_driver_check();
+#endif /* BTIF_RC_USE_UINPUT */
+}
+
+/***************************************************************************
+ **
+ ** Function       btif_rc_handler
+ **
+ ** Description    RC event handler
+ **
+ ***************************************************************************/
+void btif_rc_handler(tBTA_AV_EVT event, tBTA_AV *p_data)
+{
+    BTIF_TRACE_DEBUG2 ("%s event:%s", __FUNCTION__, dump_rc_event_name(event));
+    switch (event)
+    {
+        case BTA_AV_RC_OPEN_EVT:
+        {
+            BTIF_TRACE_DEBUG1("Peer_features:%x", p_data->rc_open.peer_features);
+            handle_rc_connect( &(p_data->rc_open) );
+        }break;
+
+        case BTA_AV_RC_CLOSE_EVT:
+        {
+            handle_rc_disconnect( &(p_data->rc_close) );
+        }break;
+
+        case BTA_AV_REMOTE_CMD_EVT:
+        {
+            BTIF_TRACE_DEBUG2("rc_id:0x%x key_state:%d", p_data->remote_cmd.rc_id,
+                               p_data->remote_cmd.key_state);
+            handle_rc_passthrough_cmd( (&p_data->remote_cmd) );
+        }break;
+        default:
+            BTIF_TRACE_DEBUG0("Unhandled RC event");
+    }
+}
+
+/***************************************************************************
+ **
+ ** Function       btif_rc_get_connected_peer
+ **
+ ** Description    Fetches the connected headset's BD_ADDR if any
+ **
+ ***************************************************************************/
+BOOLEAN btif_rc_get_connected_peer(BD_ADDR peer_addr)
+{
+    if (btif_rc_cb.rc_connected == TRUE) {
+        bdcpy(peer_addr, btif_rc_cb.rc_addr);
+        return TRUE;
+    }
+    return FALSE;
+}
+
+/***************************************************************************
+ **
+ ** Function       btif_rc_check_handle_pending_play
+ **
+ ** Description    Clears the queued PLAY command. if bSend is TRUE, forwards to app
+ **
+ ***************************************************************************/
+
+/* clear the queued PLAY command. if bSend is TRUE, forward to app */
+void btif_rc_check_handle_pending_play (BD_ADDR peer_addr, BOOLEAN bSendToApp)
+{
+    ALOGV("btapp_rc_check_handle_pending_play: bSendToApp=%d", bSendToApp);
+    if (btif_rc_cb.rc_pending_play)
+    {
+        if (bSendToApp)
+        {
+            tBTA_AV_REMOTE_CMD remote_cmd;
+            APPL_TRACE_DEBUG1("%s: Sending queued PLAYED event to app", __FUNCTION__);
+
+            memset (&remote_cmd, 0, sizeof(tBTA_AV_REMOTE_CMD));
+            remote_cmd.rc_handle  = btif_rc_cb.rc_handle;
+            remote_cmd.rc_id      = AVRC_ID_PLAY;
+            remote_cmd.hdr.ctype  = AVRC_CMD_CTRL;
+            remote_cmd.hdr.opcode = AVRC_OP_PASS_THRU;
+
+            /* delay sending to app, else there is a timing issue in the framework,
+             ** which causes the audio to be on th device's speaker. Delay between
+             ** OPEN & RC_PLAYs
+            */
+            GKI_delay (200);
+            /* send to app - both PRESSED & RELEASED */
+            remote_cmd.key_state  = AVRC_STATE_PRESS;
+            handle_rc_passthrough_cmd( &remote_cmd );
+
+            GKI_delay (100);
+
+            remote_cmd.key_state  = AVRC_STATE_RELEASE;
+            handle_rc_passthrough_cmd( &remote_cmd );
+        }
+        btif_rc_cb.rc_pending_play = FALSE;
+    }
+}
+
diff --git a/btif/src/btif_sm.c b/btif/src/btif_sm.c
new file mode 100644
index 0000000..cb4e5ad
--- /dev/null
+++ b/btif/src/btif_sm.c
@@ -0,0 +1,205 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+/*****************************************************************************
+ *
+ *  Filename:      btif_sm.c
+ *
+ *  Description:   Generic BTIF state machine API
+ *
+ *****************************************************************************/
+#include <hardware/bluetooth.h>
+
+#define LOG_TAG "BTIF_SM"
+#include "btif_common.h"
+#include "btif_sm.h"
+#include "gki.h"
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+typedef struct {
+    btif_sm_state_t         state;
+    btif_sm_handler_t       *p_handlers;
+} btif_sm_cb_t;
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**  Externs
+******************************************************************************/
+
+/*****************************************************************************
+**  Functions
+******************************************************************************/
+
+/*****************************************************************************
+**
+** Function     btif_sm_init
+**
+** Description  Initializes the state machine with the state handlers
+**              The caller should ensure that the table and the corresponding
+**              states match. The location that 'p_handlers' points to shall
+**              be available until the btif_sm_shutdown API is invoked.
+**
+** Returns      Returns a pointer to the initialized state machine handle.
+**
+******************************************************************************/
+
+btif_sm_handle_t btif_sm_init(const btif_sm_handler_t *p_handlers, btif_sm_state_t initial_state)
+{
+    btif_sm_cb_t *p_cb;
+
+    if (p_handlers == NULL)
+    {
+        BTIF_TRACE_ERROR1("%s : p_handlers is NULL", __FUNCTION__);
+        return NULL;
+    }
+
+    p_cb = (btif_sm_cb_t*) GKI_os_malloc(sizeof(btif_sm_cb_t));
+    p_cb->state = initial_state;
+    p_cb->p_handlers = (btif_sm_handler_t*)p_handlers;
+
+    /* Send BTIF_SM_ENTER_EVT to the initial state */
+    p_cb->p_handlers[initial_state](BTIF_SM_ENTER_EVT, NULL);
+
+    return (btif_sm_handle_t)p_cb;
+}
+
+/*****************************************************************************
+**
+** Function     btif_sm_shutdown
+**
+** Description  Tears down the state machine
+**
+** Returns      None
+**
+******************************************************************************/
+void btif_sm_shutdown(btif_sm_handle_t handle)
+{
+    btif_sm_cb_t *p_cb = (btif_sm_cb_t*)handle;
+
+    if (p_cb == NULL)
+    {
+        BTIF_TRACE_ERROR1("%s : Invalid handle", __FUNCTION__);
+        return;
+    }
+    GKI_os_free((void*)p_cb);
+}
+
+/*****************************************************************************
+**
+** Function     btif_sm_get_state
+**
+** Description  Fetches the current state of the state machine
+**
+** Returns      Current state
+**
+******************************************************************************/
+btif_sm_state_t btif_sm_get_state(btif_sm_handle_t handle)
+{
+    btif_sm_cb_t *p_cb = (btif_sm_cb_t*)handle;
+
+    if (p_cb == NULL)
+    {
+        BTIF_TRACE_ERROR1("%s : Invalid handle", __FUNCTION__);
+        return 0;
+    }
+
+    return p_cb->state;
+}
+
+/*****************************************************************************
+**
+** Function     btif_sm_dispatch
+**
+** Description  Dispatches the 'event' along with 'data' to the current state handler
+**
+** Returns      BT_STATUS_SUCCESS on success
+**              BT_STATUS_UNHANDLED if event was not processed
+**              BT_STATUS_FAIL otherwise
+**
+******************************************************************************/
+bt_status_t btif_sm_dispatch(btif_sm_handle_t handle, btif_sm_event_t event,
+                                void *data)
+{
+    bt_status_t status = BT_STATUS_SUCCESS;
+
+    btif_sm_cb_t *p_cb = (btif_sm_cb_t*)handle;
+
+    if (p_cb == NULL)
+    {
+        BTIF_TRACE_ERROR1("%s : Invalid handle", __FUNCTION__);
+        return BT_STATUS_FAIL;
+    }
+
+    if (p_cb->p_handlers[p_cb->state](event, data) == FALSE)
+        return BT_STATUS_UNHANDLED;
+
+    return status;
+}
+
+/*****************************************************************************
+**
+** Function     btif_sm_change_state
+**
+** Description  Make a transition to the new 'state'. The 'BTIF_SM_EXIT_EVT'
+**              shall be invoked before exiting the current state. The
+**              'BTIF_SM_ENTER_EVT' shall be invoked before entering the new state
+**
+** Returns      BT_STATUS_SUCCESS on success
+**              BT_STATUS_UNHANDLED if event was not processed
+**              BT_STATUS_FAIL otherwise
+**
+******************************************************************************/
+bt_status_t btif_sm_change_state(btif_sm_handle_t handle, btif_sm_state_t state)
+{
+    bt_status_t status = BT_STATUS_SUCCESS;
+    btif_sm_cb_t *p_cb = (btif_sm_cb_t*)handle;
+
+    if (p_cb == NULL)
+    {
+        BTIF_TRACE_ERROR1("%s : Invalid handle", __FUNCTION__);
+        return BT_STATUS_FAIL;
+    }
+
+    /* Send exit event to the current state */
+    if (p_cb->p_handlers[p_cb->state](BTIF_SM_EXIT_EVT, NULL) == FALSE)
+        status = BT_STATUS_UNHANDLED;
+
+    /* Change to the new state */
+    p_cb->state = state;
+
+    /* Send enter event to the new state */
+    if (p_cb->p_handlers[p_cb->state](BTIF_SM_ENTER_EVT, NULL) == FALSE)
+        status = BT_STATUS_UNHANDLED;
+
+    return status;
+}
diff --git a/btif/src/btif_sock.c b/btif/src/btif_sock.c
new file mode 100644
index 0000000..a2c799a
--- /dev/null
+++ b/btif/src/btif_sock.c
@@ -0,0 +1,182 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+/************************************************************************************
+ *
+ *  Filename:      btif_sock.c
+ *
+ *  Description:   Bluetooth Socket Interface
+ *
+ *
+ ***********************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_sock.h>
+
+#define LOG_TAG "BTIF_SOCK"
+#include "btif_common.h"
+#include "btif_util.h"
+
+#include "bd.h"
+
+#include "bta_api.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_rfc.h"
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("btif_sock: %s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("btif_sock: %s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("btif_sock: ## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("btif_sock: ## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+static bt_status_t btsock_listen(btsock_type_t type, const char* service_name,
+                                const uint8_t* uuid, int channel, int* sock_fd, int flags);
+static bt_status_t btsock_connect(const bt_bdaddr_t *bd_addr, btsock_type_t type,
+                                  const uint8_t* uuid, int channel, int* sock_fd, int flags);
+
+static void btsock_signaled(int fd, int type, int flags, uint32_t user_id);
+
+/*******************************************************************************
+**
+** Function         btsock_ini
+**
+** Description     initializes the bt socket interface
+**
+** Returns         bt_status_t
+**
+*******************************************************************************/
+static btsock_interface_t sock_if = {
+                sizeof(sock_if),
+                btsock_listen,
+                btsock_connect
+       };
+btsock_interface_t *btif_sock_get_interface()
+{
+    return &sock_if;
+}
+bt_status_t btif_sock_init()
+{
+    debug("");
+
+
+    static volatile int binit;
+    if(!binit)
+    {
+        //fix me, the process doesn't exit right now. don't set the init flag for now
+        //binit = 1;
+        debug("btsock initializing...");
+        btsock_thread_init();
+        int handle = btsock_thread_create(btsock_signaled, NULL);
+        if(handle >= 0 && btsock_rfc_init(handle) == BT_STATUS_SUCCESS)
+        {
+            debug("btsock successfully initialized");
+            return BT_STATUS_SUCCESS;
+        }
+    }
+    else error("btsock interface already initialized");
+    return BT_STATUS_FAIL;
+}
+void btif_sock_cleanup()
+{
+    debug("");
+    btsock_rfc_cleanup();
+    debug("leaving");
+}
+
+static bt_status_t btsock_listen(btsock_type_t type, const char* service_name,
+        const uint8_t* service_uuid, int channel, int* sock_fd, int flags)
+{
+    if((service_uuid == NULL && channel <= 0) || sock_fd == NULL)
+    {
+        error("invalid parameters, uuid:%p, channel:%d, sock_fd:%p", service_uuid, channel, sock_fd);
+        return BT_STATUS_PARM_INVALID;
+    }
+    *sock_fd = -1;
+    bt_status_t status = BT_STATUS_FAIL;
+    switch(type)
+    {
+        case BTSOCK_RFCOMM:
+            status = btsock_rfc_listen(service_name, service_uuid, channel, sock_fd, flags);
+            break;
+        case BTSOCK_L2CAP:
+            error("bt l2cap socket type not supported, type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+        case BTSOCK_SCO:
+            error("bt sco socket not supported, type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+        default:
+            error("unknown bt socket type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+    }
+    return status;
+}
+static bt_status_t btsock_connect(const bt_bdaddr_t *bd_addr, btsock_type_t type,
+        const uint8_t* uuid, int channel, int* sock_fd, int flags)
+{
+    if((uuid == NULL && channel <= 0) || bd_addr == NULL || sock_fd == NULL)
+    {
+        error("invalid parameters, bd_addr:%p, uuid:%p, channel:%d, sock_fd:%p",
+                bd_addr, uuid, channel, sock_fd);
+        return BT_STATUS_PARM_INVALID;
+    }
+    *sock_fd = -1;
+    bt_status_t status = BT_STATUS_FAIL;
+    switch(type)
+    {
+        case BTSOCK_RFCOMM:
+            status = btsock_rfc_connect(bd_addr, uuid, channel, sock_fd, flags);
+            break;
+        case BTSOCK_L2CAP:
+            error("bt l2cap socket type not supported, type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+        case BTSOCK_SCO:
+            error("bt sco socket not supported, type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+        default:
+            error("unknown bt socket type:%d", type);
+            status = BT_STATUS_UNSUPPORTED;
+            break;
+    }
+    return status;
+}
+static void btsock_signaled(int fd, int type, int flags, uint32_t user_id)
+{
+    switch(type)
+    {
+        case BTSOCK_RFCOMM:
+            btsock_rfc_signaled(fd, flags, user_id);
+            break;
+        case BTSOCK_L2CAP:
+            error("bt l2cap socket type not supported, fd:%d, flags:%d", fd, flags);
+            break;
+        case BTSOCK_SCO:
+            error("bt sco socket type not supported, fd:%d, flags:%d", fd, flags);
+            break;
+        default:
+            error("unknown socket type:%d, fd:%d, flags:%d", type, fd, flags);
+            break;
+    }
+}
+
+
+
diff --git a/btif/src/btif_sock_rfc.c b/btif/src/btif_sock_rfc.c
new file mode 100644
index 0000000..650549f
--- /dev/null
+++ b/btif/src/btif_sock_rfc.c
@@ -0,0 +1,985 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_sock_rfc.c
+ *
+ *  Description:   Handsfree Profile Bluetooth Interface
+ *
+ ***********************************************************************************/
+#include <hardware/bluetooth.h>
+#include <hardware/bt_sock.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+
+#define LOG_TAG "BTIF_SOCK"
+#include "btif_common.h"
+#include "btif_util.h"
+
+#include "bd.h"
+
+#include "bta_api.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_sdp.h"
+#include "btif_sock_util.h"
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "sdp_api.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "bta_jv_api.h"
+#include "bta_jv_co.h"
+#include "port_api.h"
+
+#include <cutils/log.h>
+#include <hardware/bluetooth.h>
+#define asrt(s) if(!(s)) APPL_TRACE_ERROR3("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+extern void uuid_to_string(bt_uuid_t *p_uuid, char *str);
+static inline void logu(const char* title, const uint8_t * p_uuid)
+{
+    char uuids[128];
+    uuid_to_string((bt_uuid_t*)p_uuid, uuids);
+    ALOGD("%s: %s", title, uuids);
+}
+
+
+
+#define MAX_RFC_CHANNEL 30
+#define MAX_RFC_SESSION BTA_JV_MAX_RFC_SR_SESSION //3 by default
+typedef struct {
+    int outgoing_congest : 1;
+    int pending_sdp_request : 1;
+    int doing_sdp_request : 1;
+    int server : 1;
+    int connected : 1;
+    int closing : 1;
+} flags_t;
+
+typedef struct {
+  flags_t f;
+  uint32_t id;
+  int security;
+  int scn;
+  bt_bdaddr_t addr;
+  uint8_t service_uuid[16];
+  char service_name[256];
+  int fd, app_fd;
+  int mtu;
+  uint8_t* packet;
+  int sdp_handle;
+  int rfc_handle;
+  int rfc_port_handle;
+  int role;
+  BUFFER_Q incoming_que;
+} rfc_slot_t;
+
+static rfc_slot_t rfc_slots[MAX_RFC_CHANNEL];
+static uint32_t rfc_slot_id;
+static volatile int pth = -1; //poll thread handle
+static void jv_dm_cback(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data);
+static void cleanup_rfc_slot(rfc_slot_t* rs);
+static inline void close_rfc_connection(int rfc_handle, int server);
+static bt_status_t dm_get_remote_service_record(bt_bdaddr_t *remote_addr,
+                                                    bt_uuid_t *uuid);
+static void *rfcomm_cback(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data);
+static inline BOOLEAN send_app_scn(rfc_slot_t* rs);
+static pthread_mutex_t slot_lock;
+#define is_init_done() (pth != -1)
+static inline void clear_slot_flag(flags_t* f)
+{
+    memset(f, 0, sizeof(*f));
+}
+
+static inline void bd_copy(UINT8* dest, UINT8* src, BOOLEAN swap)
+{
+    if (swap)
+    {
+        int i;
+        for (i =0; i < 6 ;i++)
+            dest[i]= src[5-i];
+    }
+    else memcpy(dest, src, 6);
+}
+static inline void free_gki_que(BUFFER_Q* q)
+{
+    while(!GKI_queue_is_empty(q))
+           GKI_freebuf(GKI_dequeue(q));
+}
+static void init_rfc_slots()
+{
+    int i;
+    memset(rfc_slots, 0, sizeof(rfc_slot_t)*MAX_RFC_CHANNEL);
+    for(i = 0; i < MAX_RFC_CHANNEL; i++)
+    {
+        rfc_slots[i].scn = -1;
+        rfc_slots[i].sdp_handle = 0;
+        rfc_slots[i].fd = rfc_slots[i].app_fd = -1;
+        GKI_init_q(&rfc_slots[i].incoming_que);
+    }
+    BTA_JvEnable(jv_dm_cback);
+    init_slot_lock(&slot_lock);
+}
+bt_status_t btsock_rfc_init(int poll_thread_handle)
+{
+    pth = poll_thread_handle;
+    init_rfc_slots();
+    return BT_STATUS_SUCCESS;
+}
+void btsock_rfc_cleanup()
+{
+    int curr_pth = pth;
+    pth = -1;
+    btsock_thread_exit(curr_pth);
+    lock_slot(&slot_lock);
+    int i;
+    for(i = 0; i < MAX_RFC_CHANNEL; i++)
+    {
+        if(rfc_slots[i].id)
+            cleanup_rfc_slot(&rfc_slots[i]);
+    }
+    unlock_slot(&slot_lock);
+}
+static inline rfc_slot_t* find_free_slot()
+{
+    int i;
+    for(i = 0; i < MAX_RFC_CHANNEL; i++)
+    {
+        if(rfc_slots[i].fd == -1)
+        {
+             return &rfc_slots[i];
+        }
+    }
+    return NULL;
+}
+static inline rfc_slot_t* find_rfc_slot_by_id(uint32_t id)
+{
+    int i;
+    if(id)
+    {
+        for(i = 0; i < MAX_RFC_CHANNEL; i++)
+        {
+            if(rfc_slots[i].id == id)
+            {
+                return &rfc_slots[i];
+            }
+        }
+    }
+    APPL_TRACE_WARNING1("invalid rfc slot id: %d", id);
+    return NULL;
+}
+static inline rfc_slot_t* find_rfc_slot_by_pending_sdp()
+{
+    uint32_t min_id = (uint32_t)-1;
+    int slot = -1;
+    int i;
+    for(i = 0; i < MAX_RFC_CHANNEL; i++)
+    {
+        if(rfc_slots[i].id && rfc_slots[i].f.pending_sdp_request)
+        {
+            if(rfc_slots[i].id < min_id)
+            {
+                min_id = rfc_slots[i].id;
+                slot = i;
+            }
+        }
+    }
+    if(0<= slot && slot < MAX_RFC_CHANNEL)
+        return &rfc_slots[slot];
+    return NULL;
+}
+static inline rfc_slot_t* find_rfc_slot_requesting_sdp()
+{
+    int i;
+    for(i = 0; i < MAX_RFC_CHANNEL; i++)
+    {
+        if(rfc_slots[i].id && rfc_slots[i].f.doing_sdp_request)
+                return &rfc_slots[i];
+    }
+    APPL_TRACE_DEBUG0("can not find any slot is requesting sdp");
+    return NULL;
+}
+
+static inline rfc_slot_t* find_rfc_slot_by_fd(int fd)
+{
+    int i;
+    if(fd >= 0)
+    {
+        for(i = 0; i < MAX_RFC_CHANNEL; i++)
+        {
+            if(rfc_slots[i].fd == fd)
+            {
+                if(rfc_slots[i].id)
+                    return &rfc_slots[i];
+                else
+                {
+                    APPL_TRACE_ERROR0("invalid rfc slot id, cannot be 0");
+                    break;
+                }
+            }
+        }
+    }
+    return NULL;
+}
+static rfc_slot_t* alloc_rfc_slot(const bt_bdaddr_t *addr, const char* name, const uint8_t* uuid, int channel, int flags, BOOLEAN server)
+{
+    int security = 0;
+    if(flags & BTSOCK_FLAG_ENCRYPT)
+        security |= server ? BTM_SEC_IN_ENCRYPT : BTM_SEC_OUT_ENCRYPT;
+    if(flags & BTSOCK_FLAG_AUTH)
+        security |= server ? BTM_SEC_IN_AUTHENTICATE : BTM_SEC_OUT_AUTHENTICATE;
+
+    rfc_slot_t* rs = find_free_slot();
+    if(rs)
+    {
+        int fds[2] = {-1, -1};
+        if(socketpair(AF_LOCAL, SOCK_STREAM, 0, fds))
+        {
+            APPL_TRACE_ERROR1("socketpair failed, errno:%d", errno);
+            return NULL;
+        }
+        rs->fd = fds[0];
+        rs->app_fd = fds[1];
+        rs->security = security;
+        rs->scn = channel;
+        if(uuid)
+            memcpy(rs->service_uuid, uuid, sizeof(rs->service_uuid));
+        else memset(rs->service_uuid, 0, sizeof(rs->service_uuid));
+        if(name && *name)
+            strncpy(rs->service_name, name, sizeof(rs->service_name) -1);
+        if(addr)
+            rs->addr = *addr;
+        ++rfc_slot_id;
+        if(rfc_slot_id == 0)
+            rfc_slot_id = 1; //skip 0 when wrapped
+        rs->id = rfc_slot_id;
+        rs->f.server = server;
+    }
+    return rs;
+}
+// rfc_slot_t* accept_rs = create_srv_accept_rfc_slot(srv_rs, p_open->rem_bda,p_opne->handle,  p_open->new_listen_handle);
+static inline rfc_slot_t* create_srv_accept_rfc_slot(rfc_slot_t* srv_rs, const bt_bdaddr_t* addr,
+                                        int open_handle, int new_listen_handle)
+{
+    rfc_slot_t *accept_rs = alloc_rfc_slot(addr, srv_rs->service_name, srv_rs->service_uuid, srv_rs->scn, 0, FALSE);
+    clear_slot_flag(&accept_rs->f);
+    accept_rs->f.server = FALSE;
+    accept_rs->f.connected = TRUE;
+    accept_rs->security = srv_rs->security;
+    accept_rs->mtu = srv_rs->mtu;
+    accept_rs->role = srv_rs->role;
+    accept_rs->rfc_handle = open_handle;
+    accept_rs->rfc_port_handle = BTA_JvRfcommGetPortHdl(open_handle);
+    asrt(accept_rs->rfc_handle == srv_rs->rfc_handle);
+    asrt(accept_rs->rfc_port_handle == srv_rs->rfc_port_handle);
+    //now update listen handle of server slot
+    srv_rs->rfc_handle = new_listen_handle;
+    srv_rs->rfc_port_handle =  BTA_JvRfcommGetPortHdl(new_listen_handle);
+    //now swap the slot id
+    uint32_t new_listen_id = accept_rs->id;
+    accept_rs->id = srv_rs->id;
+    srv_rs->id = new_listen_id;
+    return accept_rs;
+}
+bt_status_t btsock_rfc_listen(const char* service_name, const uint8_t* service_uuid, int channel,
+                            int* sock_fd, int flags)
+{
+    if(sock_fd == NULL || (service_uuid == NULL && (channel < 1 || channel > 30)))
+    {
+        APPL_TRACE_ERROR3("invalid rfc channel:%d or sock_fd:%p, uuid:%p", channel, sock_fd, service_uuid);
+        return BT_STATUS_PARM_INVALID;
+    }
+    *sock_fd = -1;
+    if(!is_init_done())
+        return BT_STATUS_NOT_READY;
+    if(is_uuid_empty(service_uuid))
+        service_uuid = UUID_SPP; //use serial port profile to listen to specified channel
+    else
+    {
+        //Check the service_uuid. overwrite the channel # if reserved
+        int reserved_channel = get_reserved_rfc_channel(service_uuid);
+        if(reserved_channel > 0)
+        {
+            channel = reserved_channel;
+        }
+    }
+    int status = BT_STATUS_FAIL;
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = alloc_rfc_slot(NULL, service_name, service_uuid, channel, flags, TRUE);
+    if(rs)
+    {
+        BTA_JvCreateRecordByUser((void *)rs->id);
+        *sock_fd = rs->app_fd;
+        rs->app_fd = -1; //the fd ownership is transferred to app
+        status = BT_STATUS_SUCCESS;
+        btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_EXCEPTION, rs->id);
+    }
+    unlock_slot(&slot_lock);
+    return status;
+}
+bt_status_t btsock_rfc_connect(const bt_bdaddr_t *bd_addr, const uint8_t* service_uuid,
+        int channel, int* sock_fd, int flags)
+{
+    if(sock_fd == NULL || (service_uuid == NULL && (channel < 1 || channel > 30)))
+    {
+        APPL_TRACE_ERROR3("invalid rfc channel:%d or sock_fd:%p, uuid:%p", channel, sock_fd,
+                          service_uuid);
+        return BT_STATUS_PARM_INVALID;
+    }
+    *sock_fd = -1;
+    if(!is_init_done())
+        return BT_STATUS_NOT_READY;
+    int status = BT_STATUS_FAIL;
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = alloc_rfc_slot(bd_addr, NULL, service_uuid, channel, flags, FALSE);
+    if(rs)
+    {
+        if(is_uuid_empty(service_uuid))
+        {
+            APPL_TRACE_DEBUG1("connecting to rfcomm channel:%d without service discovery", channel);
+            if(BTA_JvRfcommConnect(rs->security, rs->role, rs->scn, rs->addr.address,
+                        rfcomm_cback, (void*)rs->id) == BTA_JV_SUCCESS)
+            {
+                if(send_app_scn(rs))
+                {
+                    btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM,
+                                                        SOCK_THREAD_FD_RD, rs->id);
+                    *sock_fd = rs->app_fd;
+                    rs->app_fd = -1; //the fd ownership is transferred to app
+                    status = BT_STATUS_SUCCESS;
+                }
+                else cleanup_rfc_slot(rs);
+            }
+            else cleanup_rfc_slot(rs);
+        }
+        else
+        {
+            tSDP_UUID sdp_uuid;
+            sdp_uuid.len = 16;
+            memcpy(sdp_uuid.uu.uuid128, service_uuid, sizeof(sdp_uuid.uu.uuid128));
+            logu("service_uuid", service_uuid);
+            *sock_fd = rs->app_fd;
+            rs->app_fd = -1; //the fd ownership is transferred to app
+            status = BT_STATUS_SUCCESS;
+            rfc_slot_t* rs_doing_sdp = find_rfc_slot_requesting_sdp();
+            if(rs_doing_sdp == NULL)
+            {
+                BTA_JvStartDiscovery((UINT8*)bd_addr->address, 1, &sdp_uuid, (void*)rs->id);
+                rs->f.pending_sdp_request = FALSE;
+                rs->f.doing_sdp_request = TRUE;
+            }
+            else
+            {
+                rs->f.pending_sdp_request = TRUE;
+                rs->f.doing_sdp_request = FALSE;
+            }
+            btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_RD, rs->id);
+        }
+    }
+    unlock_slot(&slot_lock);
+    return status;
+}
+
+static int create_server_sdp_record(rfc_slot_t* rs)
+{
+    int scn = rs->scn;
+    if(rs->scn > 0)
+    {
+        if(BTM_TryAllocateSCN(rs->scn) == FALSE)
+        {
+            APPL_TRACE_ERROR1("rfc channel:%d already in use", scn);
+            return FALSE;
+        }
+    }
+    else if((rs->scn = BTM_AllocateSCN()) == 0)
+    {
+        APPL_TRACE_ERROR0("run out of rfc channels");
+        return FALSE;
+    }
+    if((rs->sdp_handle = add_rfc_sdp_rec(rs->service_name, rs->service_uuid, rs->scn)) <= 0)
+    {
+        return FALSE;
+    }
+    return TRUE;
+}
+const char * jv_evt[] = {
+    "BTA_JV_ENABLE_EVT",
+    "BTA_JV_SET_DISCOVER_EVT",
+    "BTA_JV_LOCAL_ADDR_EVT",
+    "BTA_JV_LOCAL_NAME_EVT",
+    "BTA_JV_REMOTE_NAME_EVT",
+    "BTA_JV_SET_ENCRYPTION_EVT",
+    "BTA_JV_GET_SCN_EVT",
+    "BTA_JV_GET_PSM_EVT",
+    "BTA_JV_DISCOVERY_COMP_EVT",
+    "BTA_JV_SERVICES_LEN_EVT",
+    "BTA_JV_SERVICE_SEL_EVT",
+    "BTA_JV_CREATE_RECORD_EVT",
+    "BTA_JV_UPDATE_RECORD_EVT",
+    "BTA_JV_ADD_ATTR_EVT",
+    "BTA_JV_DELETE_ATTR_EVT",
+    "BTA_JV_CANCEL_DISCVRY_EVT",
+
+    "BTA_JV_L2CAP_OPEN_EVT",
+    "BTA_JV_L2CAP_CLOSE_EVT",
+    "BTA_JV_L2CAP_START_EVT",
+    "BTA_JV_L2CAP_CL_INIT_EVT",
+    "BTA_JV_L2CAP_DATA_IND_EVT",
+    "BTA_JV_L2CAP_CONG_EVT",
+    "BTA_JV_L2CAP_READ_EVT",
+    "BTA_JV_L2CAP_RECEIVE_EVT",
+    "BTA_JV_L2CAP_WRITE_EVT",
+
+    "BTA_JV_RFCOMM_OPEN_EVT",
+    "BTA_JV_RFCOMM_CLOSE_EVT",
+    "BTA_JV_RFCOMM_START_EVT",
+    "BTA_JV_RFCOMM_CL_INIT_EVT",
+    "BTA_JV_RFCOMM_DATA_IND_EVT",
+    "BTA_JV_RFCOMM_CONG_EVT",
+    "BTA_JV_RFCOMM_READ_EVT",
+    "BTA_JV_RFCOMM_WRITE_EVT",
+    "BTA_JV_RFCOMM_SRV_OPEN_EVT", //  33 /* open status of Server RFCOMM connection */
+    "BTA_JV_MAX_EVT"
+};
+static inline void free_rfc_slot_scn(rfc_slot_t* rs)
+{
+    if(rs->scn > 0)
+    {
+        if(rs->f.server && !rs->f.closing)
+        {
+            BTA_JvRfcommStopServer(rs->rfc_handle);
+            rs->rfc_handle = 0;
+        }
+        BTM_FreeSCN(rs->scn);
+        rs->scn = 0;
+    }
+}
+static void cleanup_rfc_slot(rfc_slot_t* rs)
+{
+    APPL_TRACE_DEBUG3("cleanup slot:%d, fd:%d, scn:%d", rs->id, rs->fd, rs->scn);
+    if(rs->fd != -1)
+    {
+        shutdown(rs->fd, 2);
+        close(rs->fd);
+        rs->fd = -1;
+    }
+    if(rs->app_fd != -1)
+    {
+        close(rs->app_fd);
+        rs->app_fd = -1;
+    }
+    if(rs->sdp_handle > 0)
+    {
+        del_rfc_sdp_rec(rs->sdp_handle);
+        rs->sdp_handle = 0;
+    }
+    if(rs->rfc_handle && !rs->f.closing && !rs->f.server)
+    {
+        APPL_TRACE_DEBUG1("closing rfcomm connection, rfc_handle:%d", rs->rfc_handle);
+        BTA_JvRfcommClose(rs->rfc_handle);
+        rs->rfc_handle = 0;
+    }
+    free_rfc_slot_scn(rs);
+    free_gki_que(&rs->incoming_que);
+
+    rs->rfc_port_handle = 0;
+    //cleanup the flag
+    memset(&rs->f, 0, sizeof(rs->f));
+    rs->id = 0;
+}
+static inline BOOLEAN send_app_scn(rfc_slot_t* rs)
+{
+    if(sock_send_all(rs->fd, (const uint8_t*)&rs->scn, sizeof(rs->scn)) == sizeof(rs->scn))
+    {
+        return TRUE;
+    }
+
+    return FALSE;
+}
+static BOOLEAN send_app_connect_signal(int fd, const bt_bdaddr_t* addr, int channel, int status, int send_fd)
+{
+/*
+    typedef struct {
+    short size;
+    bt_bdaddr_t bd_addr;
+    int channel;
+    int status;
+} __attribute__((packed)) sock_connect_signal_t;
+*/
+    sock_connect_signal_t cs;
+    cs.size = sizeof(cs);
+    cs.bd_addr = *addr;
+    cs.channel = channel;
+    cs.status = status;
+    if(send_fd != -1)
+    {
+        if(sock_send_fd(fd, (const uint8_t*)&cs, sizeof(cs), send_fd) == sizeof(cs))
+            return TRUE;
+        else APPL_TRACE_ERROR2("sock_send_fd failed, fd:%d, send_fd:%d", fd, send_fd);
+    }
+    else if(sock_send_all(fd, (const uint8_t*)&cs, sizeof(cs)) == sizeof(cs))
+    {
+        return TRUE;
+    }
+    return FALSE;
+}
+static void on_cl_rfc_init(tBTA_JV_RFCOMM_CL_INIT *p_init, uint32_t id)
+{
+   lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        if (p_init->status != BTA_JV_SUCCESS)
+            cleanup_rfc_slot(rs);
+        else
+        {
+            rs->rfc_handle = p_init->handle;
+        }
+    }
+    unlock_slot(&slot_lock);
+}
+static void  on_srv_rfc_listen_started(tBTA_JV_RFCOMM_START *p_start, uint32_t id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        if (p_start->status != BTA_JV_SUCCESS)
+            cleanup_rfc_slot(rs);
+        else
+        {
+            rs->rfc_handle = p_start->handle;
+
+            if(!send_app_scn(rs))
+            {
+                //closed
+                APPL_TRACE_DEBUG1("send_app_scn() failed, close rs->id:%d", rs->id);
+                cleanup_rfc_slot(rs);
+            }
+        }
+    }
+    unlock_slot(&slot_lock);
+}
+static uint32_t on_srv_rfc_connect(tBTA_JV_RFCOMM_SRV_OPEN *p_open, uint32_t id)
+{
+    uint32_t new_listen_slot_id = 0;
+    lock_slot(&slot_lock);
+    rfc_slot_t* srv_rs = find_rfc_slot_by_id(id);
+    if(srv_rs)
+    {
+        rfc_slot_t* accept_rs = create_srv_accept_rfc_slot(srv_rs, (const bt_bdaddr_t*)p_open->rem_bda,
+                                                           p_open->handle, p_open->new_listen_handle);
+        if(accept_rs)
+        {
+            //start monitor the socket
+            btsock_thread_add_fd(pth, srv_rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_EXCEPTION, srv_rs->id);
+            btsock_thread_add_fd(pth, accept_rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_RD, accept_rs->id);
+            APPL_TRACE_DEBUG1("sending connect signal & app fd:%dto app server to accept() the connection",
+                             accept_rs->app_fd);
+            APPL_TRACE_DEBUG2("server fd:%d, scn:%d", srv_rs->fd, srv_rs->scn);
+            send_app_connect_signal(srv_rs->fd, &accept_rs->addr, srv_rs->scn, 0, accept_rs->app_fd);
+            accept_rs->app_fd = -1; //the fd is closed after sent to app
+            new_listen_slot_id = srv_rs->id;
+        }
+    }
+    unlock_slot(&slot_lock);
+    return new_listen_slot_id;
+}
+static void on_cli_rfc_connect(tBTA_JV_RFCOMM_OPEN *p_open, uint32_t id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs && p_open->status == BTA_JV_SUCCESS)
+    {
+        rs->rfc_port_handle = BTA_JvRfcommGetPortHdl(p_open->handle);
+        bd_copy(rs->addr.address, p_open->rem_bda, 0);
+        //notify app rfc is connected
+        APPL_TRACE_DEBUG4("call send_app_connect_signal, slot id:%d, fd:%d, rfc scn:%d, server:%d",
+                         rs->id, rs->fd, rs->scn, rs->f.server);
+        if(send_app_connect_signal(rs->fd, &rs->addr, rs->scn, 0, -1))
+        {
+            //start monitoring the socketpair to get call back when app writing data
+            APPL_TRACE_DEBUG3("on_rfc_connect_ind, connect signal sent, slot id:%d, rfc scn:%d, server:%d",
+                             rs->id, rs->scn, rs->f.server);
+            rs->f.connected = TRUE;
+        }
+        else APPL_TRACE_ERROR0("send_app_connect_signal failed");
+    }
+    else if(rs)
+        cleanup_rfc_slot(rs);
+    unlock_slot(&slot_lock);
+}
+static void on_rfc_close(tBTA_JV_RFCOMM_CLOSE * p_close, uint32_t id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        APPL_TRACE_DEBUG4("on_rfc_close, slot id:%d, fd:%d, rfc scn:%d, server:%d",
+                         rs->id, rs->fd, rs->scn, rs->f.server);
+        free_rfc_slot_scn(rs);
+        //rfc_handle already closed when receiving rfcomm close event from stack.
+        rs->rfc_handle = 0;
+        rs->f.connected = FALSE;
+        cleanup_rfc_slot(rs);
+    }
+    unlock_slot(&slot_lock);
+}
+static void on_rfc_write_done(tBTA_JV_RFCOMM_WRITE *p, uint32_t id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs && !rs->f.outgoing_congest)
+    {
+        //mointer the fd for any outgoing data
+        btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_RD, rs->id);
+    }
+    unlock_slot(&slot_lock);
+}
+static void on_rfc_outgoing_congest(tBTA_JV_RFCOMM_CONG *p, uint32_t id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        rs->f.outgoing_congest = p->cong ? 1 : 0;
+        //mointer the fd for any outgoing data
+        if(!rs->f.outgoing_congest)
+            btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_RD, rs->id);
+    }
+    unlock_slot(&slot_lock);
+}
+
+static void *rfcomm_cback(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data)
+{
+    int rc;
+    void* new_user_data = NULL;
+    APPL_TRACE_DEBUG1("event=%s", jv_evt[event]);
+
+    switch (event)
+    {
+    case BTA_JV_RFCOMM_START_EVT:
+        on_srv_rfc_listen_started(&p_data->rfc_start, (uint32_t)user_data);
+        break;
+
+    case BTA_JV_RFCOMM_CL_INIT_EVT:
+        on_cl_rfc_init(&p_data->rfc_cl_init, (uint32_t)user_data);
+        break;
+
+    case BTA_JV_RFCOMM_OPEN_EVT:
+        on_cli_rfc_connect(&p_data->rfc_open, (uint32_t)user_data);
+        break;
+    case BTA_JV_RFCOMM_SRV_OPEN_EVT:
+        new_user_data = (void*)on_srv_rfc_connect(&p_data->rfc_srv_open, (uint32_t)user_data);
+        break;
+
+    case BTA_JV_RFCOMM_CLOSE_EVT:
+        on_rfc_close(&p_data->rfc_close, (uint32_t)user_data);
+        break;
+
+    case BTA_JV_RFCOMM_READ_EVT:
+        APPL_TRACE_DEBUG0("BTA_JV_RFCOMM_READ_EVT not used");
+        break;
+
+    case BTA_JV_RFCOMM_WRITE_EVT:
+        on_rfc_write_done(&p_data->rfc_write, (uint32_t)user_data);
+        break;
+
+    case BTA_JV_RFCOMM_DATA_IND_EVT:
+        APPL_TRACE_DEBUG0("BTA_JV_RFCOMM_DATA_IND_EVT not used");
+        break;
+
+    case BTA_JV_RFCOMM_CONG_EVT:
+        //on_rfc_cong(&p_data->rfc_cong);
+        on_rfc_outgoing_congest(&p_data->rfc_cong, (uint32_t)user_data);
+        break;
+    default:
+        APPL_TRACE_ERROR2("unhandled event %d, slot id:%d", event, (uint32_t)user_data);
+        break;
+    }
+    return new_user_data;
+}
+
+static void jv_dm_cback(tBTA_JV_EVT event, tBTA_JV *p_data, void *user_data)
+{
+    uint32_t id = (uint32_t)user_data;
+    APPL_TRACE_DEBUG2("event:%d, slot id:%d", event, id);
+    switch(event)
+    {
+        case BTA_JV_CREATE_RECORD_EVT:
+            {
+                lock_slot(&slot_lock);
+                rfc_slot_t* rs = find_rfc_slot_by_id(id);
+                if(rs && create_server_sdp_record(rs))
+                {
+                    //now start the rfcomm server after sdp & channel # assigned
+                    BTA_JvRfcommStartServer(rs->security, rs->role, rs->scn, MAX_RFC_SESSION, rfcomm_cback,
+                                            (void*)rs->id);
+                }
+                unlock_slot(&slot_lock);
+                break;
+            }
+        case BTA_JV_DISCOVERY_COMP_EVT:
+            {
+                rfc_slot_t* rs = NULL;
+                lock_slot(&slot_lock);
+                if(p_data->disc_comp.status == BTA_JV_SUCCESS && p_data->disc_comp.scn)
+                {
+                    APPL_TRACE_DEBUG3("BTA_JV_DISCOVERY_COMP_EVT, slot id:%d, status:%d, scn:%d",
+                                      id, p_data->disc_comp.status, p_data->disc_comp.scn);
+
+                    rs = find_rfc_slot_by_id(id);
+                    if(rs && rs->f.doing_sdp_request)
+                    {
+                        if(BTA_JvRfcommConnect(rs->security, rs->role, p_data->disc_comp.scn, rs->addr.address,
+                                    rfcomm_cback, (void*)rs->id) == BTA_JV_SUCCESS)
+                        {
+                            rs->scn = p_data->disc_comp.scn;
+                            rs->f.doing_sdp_request = FALSE;
+                            if(!send_app_scn(rs))
+                                cleanup_rfc_slot(rs);
+                        }
+                        else cleanup_rfc_slot(rs);
+                    }
+                    else if(rs)
+                    {
+                        APPL_TRACE_ERROR3("DISCOVERY_COMP_EVT no pending sdp request, slot id:%d, \
+                                flag sdp pending:%d, flag sdp doing:%d",
+                                id, rs->f.pending_sdp_request, rs->f.doing_sdp_request);
+                    }
+                }
+                else
+                {
+                    APPL_TRACE_ERROR3("DISCOVERY_COMP_EVT slot id:%d, failed to find channle, \
+                                      status:%d, scn:%d", id, p_data->disc_comp.status,
+                                      p_data->disc_comp.scn);
+                    rs = find_rfc_slot_by_id(id);
+                    if(rs)
+                        cleanup_rfc_slot(rs);
+                }
+                rs = find_rfc_slot_by_pending_sdp();
+                if(rs)
+                {
+                    APPL_TRACE_DEBUG0("BTA_JV_DISCOVERY_COMP_EVT, start another pending scn sdp request");
+                    tSDP_UUID sdp_uuid;
+                    sdp_uuid.len = 16;
+                    memcpy(sdp_uuid.uu.uuid128, rs->service_uuid, sizeof(sdp_uuid.uu.uuid128));
+                    BTA_JvStartDiscovery((UINT8*)rs->addr.address, 1, &sdp_uuid, (void*)rs->id);
+                    rs->f.pending_sdp_request = FALSE;
+                    rs->f.doing_sdp_request = TRUE;
+                }
+                unlock_slot(&slot_lock);
+                break;
+            }
+        default:
+            APPL_TRACE_DEBUG2("unhandled event:%d, slot id:%d", event, id);
+            break;
+    }
+
+}
+#define SENT_ALL 2
+#define SENT_PARTIAL 1
+#define SENT_NONE 0
+#define SENT_FAILED (-1)
+static int send_data_to_app(int fd, BT_HDR *p_buf)
+{
+    if(p_buf->len == 0)
+        return SENT_ALL;
+    int sent = send(fd, (UINT8 *)(p_buf + 1) + p_buf->offset,  p_buf->len, MSG_DONTWAIT);
+    if(sent == p_buf->len)
+        return SENT_ALL;
+
+    if(sent > 0 && sent < p_buf->len)
+    {
+        //sent partial
+        APPL_TRACE_ERROR2("send partial, sent:%d, p_buf->len:%d", sent, p_buf->len);
+        p_buf->offset += sent;
+        p_buf->len -= sent;
+        return SENT_PARTIAL;
+
+    }
+    if(sent < 0 &&
+        (errno == EAGAIN || errno == EWOULDBLOCK || errno == EINTR))
+    {
+        APPL_TRACE_ERROR1("send none, EAGAIN or EWOULDBLOCK, errno:%d", errno);
+        return SENT_NONE;
+    }
+    APPL_TRACE_ERROR3("unknown send() error, sent:%d, p_buf->len:%d,  errno:%d", sent, p_buf->len, errno);
+    return SENT_FAILED;
+}
+static BOOLEAN flush_incoming_que_on_wr_signal(rfc_slot_t* rs)
+{
+    while(!GKI_queue_is_empty(&rs->incoming_que))
+    {
+        BT_HDR *p_buf = GKI_dequeue(&rs->incoming_que);
+        int sent = send_data_to_app(rs->fd, p_buf);
+        switch(sent)
+        {
+            case SENT_NONE:
+            case SENT_PARTIAL:
+                //add it back to the queue at same position
+                GKI_enqueue_head (&rs->incoming_que, p_buf);
+                //monitor the fd to get callback when app is ready to receive data
+                btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_WR, rs->id);
+                return TRUE;
+            case SENT_ALL:
+                GKI_freebuf(p_buf);
+                break;
+            case SENT_FAILED:
+                GKI_freebuf(p_buf);
+                return FALSE;
+        }
+    }
+
+    //app is ready to receive data, tell stack to start the data flow
+    //fix me: need a jv flow control api to serialize the call in stack
+    PORT_FlowControl(rs->rfc_port_handle, TRUE);
+    return TRUE;
+}
+void btsock_rfc_signaled(int fd, int flags, uint32_t user_id)
+{
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(user_id);
+    if(rs)
+    {
+        APPL_TRACE_DEBUG3("rfc slot id:%d, fd:%d, flags:%x", rs->id, fd, flags);
+        BOOLEAN need_close = FALSE;
+        if(flags & SOCK_THREAD_FD_RD)
+        {
+            //data available from app, tell stack we have outgoing data
+            if(!rs->f.server)
+            {
+                if(rs->f.connected)
+                    BTA_JvRfcommWrite(rs->rfc_handle, (UINT32)rs->id);
+                else
+                {
+                    APPL_TRACE_ERROR2("SOCK_THREAD_FD_RD signaled when rfc is not connected, \
+                                      slot id:%d, channel:%d", rs->id, rs->scn);
+                    need_close = TRUE;
+                }
+            }
+        }
+        if(flags & SOCK_THREAD_FD_WR)
+        {
+            //app is ready to receive more data, tell stack to enable the data flow
+            if(!rs->f.connected || !flush_incoming_que_on_wr_signal(rs))
+            {
+                need_close = TRUE;
+                APPL_TRACE_ERROR2("SOCK_THREAD_FD_WR signaled when rfc is not connected \
+                                  or app closed fd, slot id:%d, channel:%d", rs->id, rs->scn);
+            }
+
+        }
+        if(need_close || (flags & SOCK_THREAD_FD_EXCEPTION))
+        {
+            APPL_TRACE_DEBUG1("SOCK_THREAD_FD_EXCEPTION, flags:%x", flags);
+            rs->f.closing = TRUE;
+            if(rs->f.server)
+               BTA_JvRfcommStopServer(rs->rfc_handle);
+            else
+                BTA_JvRfcommClose(rs->rfc_handle);
+        }
+    }
+    unlock_slot(&slot_lock);
+}
+//stack rfcomm callout functions
+//[
+int bta_co_rfc_data_incoming(void *user_data, BT_HDR *p_buf)
+{
+    uint32_t id = (uint32_t)user_data;
+    int ret = 0;
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+
+        int sent = send_data_to_app(rs->fd, p_buf);
+        switch(sent)
+        {
+            case SENT_NONE:
+            case SENT_PARTIAL:
+                //add it to the end of the queue
+                GKI_enqueue(&rs->incoming_que, p_buf);
+                //monitor the fd to get callback when app is ready to receive data
+                btsock_thread_add_fd(pth, rs->fd, BTSOCK_RFCOMM, SOCK_THREAD_FD_WR, rs->id);
+                break;
+            case SENT_ALL:
+                GKI_freebuf(p_buf);
+                ret = 1;//enable the data flow
+                break;
+            case SENT_FAILED:
+                GKI_freebuf(p_buf);
+                cleanup_rfc_slot(rs);
+                break;
+        }
+     }
+    unlock_slot(&slot_lock);
+    return ret;//return 0 to disable data flow
+}
+int bta_co_rfc_data_outgoing_size(void *user_data, int *size)
+{
+    uint32_t id = (uint32_t)user_data;
+    int ret = FALSE;
+    *size = 0;
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        if(ioctl(rs->fd, FIONREAD, size) == 0)
+        {
+            APPL_TRACE_DEBUG2("ioctl read avaiable size:%d, fd:%d", *size, rs->fd);
+            ret = TRUE;
+        }
+        else
+        {
+            APPL_TRACE_ERROR2("ioctl FIONREAD error, errno:%d, fd:%d", errno, rs->fd);
+            cleanup_rfc_slot(rs);
+        }
+    }
+    unlock_slot(&slot_lock);
+    return ret;
+}
+int bta_co_rfc_data_outgoing(void *user_data, UINT8* buf, UINT16 size)
+{
+    uint32_t id = (uint32_t)user_data;
+    int ret = FALSE;
+    lock_slot(&slot_lock);
+    rfc_slot_t* rs = find_rfc_slot_by_id(id);
+    if(rs)
+    {
+        int received = recv(rs->fd, buf, size, 0);
+        if(received == size)
+            ret = TRUE;
+        else
+        {
+            APPL_TRACE_ERROR4("recv error, errno:%d, fd:%d, size:%d, received:%d",
+                             errno, rs->fd, size, received);
+            cleanup_rfc_slot(rs);
+        }
+    }
+    unlock_slot(&slot_lock);
+    return ret;
+}
+//]
+
diff --git a/btif/src/btif_sock_sdp.c b/btif/src/btif_sock_sdp.c
new file mode 100644
index 0000000..cf55e8a
--- /dev/null
+++ b/btif/src/btif_sock_sdp.c
@@ -0,0 +1,443 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hf.c
+ *
+ *  Description:   Handsfree Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_sock.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <errno.h>
+
+#define LOG_TAG "BTIF_SOCK_SDP"
+#include "btif_common.h"
+#include "btif_util.h"
+
+#include "bd.h"
+
+#include "bta_api.h"
+
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "sdp_api.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "btif_sock_sdp.h"
+#include "utl.h"
+#include "../bta/pb/bta_pbs_int.h"
+#include "../include/bta_op_api.h"
+#include <cutils/log.h>
+
+#define RESERVED_SCN_PBS 19
+#define RESERVED_SCN_OPS 12
+
+#define UUID_MAX_LENGTH 16
+
+
+#define IS_UUID(u1,u2)  !memcmp(u1,u2,UUID_MAX_LENGTH)
+
+
+#define BTM_NUM_PROTO_ELEMS 2
+static int add_sdp_by_uuid(const char *name,  const uint8_t *service_uuid, UINT16 channel)
+{
+
+    UINT32 btm_sdp_handle;
+
+    tSDP_PROTOCOL_ELEM  proto_elem_list[BTM_NUM_PROTO_ELEMS];
+
+    /* register the service */
+    if ((btm_sdp_handle = SDP_CreateRecord()) != FALSE)
+    {
+        /*** Fill out the protocol element sequence for SDP ***/
+        proto_elem_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        proto_elem_list[0].num_params = 0;
+        proto_elem_list[1].protocol_uuid = UUID_PROTOCOL_RFCOMM;
+        proto_elem_list[1].num_params = 1;
+
+        proto_elem_list[1].params[0] = channel;
+
+        if (SDP_AddProtocolList(btm_sdp_handle, BTM_NUM_PROTO_ELEMS,
+            proto_elem_list))
+        {
+            UINT8           buff[48];
+            UINT8           *p, *type_buf[1];
+            UINT8       type[1], type_len[1];
+         p = type_buf[0] = buff;
+         type[0] = UUID_DESC_TYPE;
+
+//         UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_SIXTEEN_BYTES);
+         ARRAY_TO_BE_STREAM (p, service_uuid, 16);
+            type_len[0] = 16;
+            if( SDP_AddSequence(btm_sdp_handle, (UINT16) ATTR_ID_SERVICE_CLASS_ID_LIST,
+                          1, type, type_len, type_buf) )
+//            if (SDP_AddServiceClassIdList(btm_sdp_handle, 1, &service_uuid))
+            {
+                if ((SDP_AddAttribute(btm_sdp_handle, ATTR_ID_SERVICE_NAME,
+                    TEXT_STR_DESC_TYPE, (UINT32)(strlen(name)+1),
+                    (UINT8 *)name)) )
+                {
+                    UINT16  list[1];
+
+                    /* Make the service browseable */
+                    list[0] = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+                    if ((SDP_AddUuidSequence (btm_sdp_handle,  ATTR_ID_BROWSE_GROUP_LIST,
+                        1, list)) )
+
+                        return btm_sdp_handle;
+                }
+            }
+        }
+    }
+
+    return 0;
+}
+
+
+/* Realm Character Set */
+#define BTA_PBS_REALM_CHARSET   0       /* ASCII */
+
+/* Specifies whether or not client's user id is required during obex authentication */
+#define BTA_PBS_USERID_REQ      FALSE
+extern const tBTA_PBS_CFG bta_pbs_cfg;
+const tBTA_PBS_CFG bta_pbs_cfg =
+{
+    BTA_PBS_REALM_CHARSET,      /* Server only */
+    BTA_PBS_USERID_REQ,         /* Server only */
+    (BTA_PBS_SUPF_DOWNLOAD | BTA_PBS_SURF_BROWSE),
+    BTA_PBS_REPOSIT_LOCAL,
+};
+
+static int add_pbap_sdp(const char* p_service_name, int scn)
+{
+
+    tSDP_PROTOCOL_ELEM  protoList [3];
+    UINT16              pbs_service = UUID_SERVCLASS_PBAP_PSE;
+    UINT16              browse = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    BOOLEAN             status = FALSE;
+    UINT32              sdp_handle = 0;
+    tBTA_PBS_CFG *p_bta_pbs_cfg = (tBTA_PBS_CFG *)&bta_pbs_cfg;
+
+    APPL_TRACE_DEBUG2("scn %d, service name %s", scn, p_service_name);
+
+    if ((sdp_handle = SDP_CreateRecord()) == 0)
+    {
+        APPL_TRACE_ERROR0("PBS SDP: Unable to register PBS Service");
+        return sdp_handle;
+    }
+
+    /* add service class */
+    if (SDP_AddServiceClassIdList(sdp_handle, 1, &pbs_service))
+    {
+        memset( protoList, 0 , 3*sizeof(tSDP_PROTOCOL_ELEM) );
+        /* add protocol list, including RFCOMM scn */
+        protoList[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        protoList[0].num_params = 0;
+        protoList[1].protocol_uuid = UUID_PROTOCOL_RFCOMM;
+        protoList[1].num_params = 1;
+        protoList[1].params[0] = scn;
+        protoList[2].protocol_uuid = UUID_PROTOCOL_OBEX;
+        protoList[2].num_params = 0;
+
+        if (SDP_AddProtocolList(sdp_handle, 3, protoList))
+        {
+            status = TRUE;  /* All mandatory fields were successful */
+
+            /* optional:  if name is not "", add a name entry */
+            if (*p_service_name != '\0')
+                SDP_AddAttribute(sdp_handle,
+                                 (UINT16)ATTR_ID_SERVICE_NAME,
+                                 (UINT8)TEXT_STR_DESC_TYPE,
+                                 (UINT32)(strlen(p_service_name) + 1),
+                                 (UINT8 *)p_service_name);
+
+            /* Add in the Bluetooth Profile Descriptor List */
+            SDP_AddProfileDescriptorList(sdp_handle,
+                                             UUID_SERVCLASS_PHONE_ACCESS,
+                                             BTA_PBS_DEFAULT_VERSION);
+
+        } /* end of setting mandatory protocol list */
+    } /* end of setting mandatory service class */
+
+    /* add supported feature and repositories */
+    if (status)
+    {
+        SDP_AddAttribute(sdp_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE,
+                  (UINT32)1, (UINT8*)&p_bta_pbs_cfg->supported_features);
+        SDP_AddAttribute(sdp_handle, ATTR_ID_SUPPORTED_REPOSITORIES, UINT_DESC_TYPE,
+                  (UINT32)1, (UINT8*)&p_bta_pbs_cfg->supported_repositories);
+
+        /* Make the service browseable */
+        SDP_AddUuidSequence (sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, &browse);
+    }
+
+    if (!status)
+    {
+        SDP_DeleteRecord(sdp_handle);
+        sdp_handle = 0;
+        APPL_TRACE_ERROR0("bta_pbs_sdp_register FAILED");
+    }
+    else
+    {
+        bta_sys_add_uuid(pbs_service);  /* UUID_SERVCLASS_PBAP_PSE */
+        APPL_TRACE_DEBUG1("PBS:  SDP Registered (handle 0x%08x)", sdp_handle);
+    }
+
+    return sdp_handle;
+}
+
+
+/* object format lookup table */
+static const tBTA_OP_FMT bta_ops_obj_fmt[] =
+{
+    BTA_OP_VCARD21_FMT,
+    BTA_OP_VCARD30_FMT,
+    BTA_OP_VCAL_FMT,
+    BTA_OP_ICAL_FMT,
+    BTA_OP_VNOTE_FMT,
+    BTA_OP_VMSG_FMT,
+    BTA_OP_OTHER_FMT
+};
+
+#define BTA_OPS_NUM_FMTS        7
+#define BTA_OPS_PROTOCOL_COUNT  3
+
+#ifndef BTUI_OPS_FORMATS
+#define BTUI_OPS_FORMATS            (BTA_OP_VCARD21_MASK | BTA_OP_VCARD30_MASK | \
+                                         BTA_OP_VCAL_MASK | BTA_OP_ICAL_MASK | \
+                                         BTA_OP_VNOTE_MASK | BTA_OP_VMSG_MASK | \
+                                         BTA_OP_ANY_MASK )
+#endif
+
+static int add_ops_sdp(const char *p_service_name,int scn)
+{
+
+
+    tSDP_PROTOCOL_ELEM  protoList [BTA_OPS_PROTOCOL_COUNT];
+    UINT16      servclass = UUID_SERVCLASS_OBEX_OBJECT_PUSH;
+    int         i, j;
+    tBTA_UTL_COD cod;
+    UINT8       desc_type[BTA_OPS_NUM_FMTS];
+    UINT8       type_len[BTA_OPS_NUM_FMTS];
+    UINT8       *type_value[BTA_OPS_NUM_FMTS];
+    UINT16      browse;
+    UINT32 sdp_handle;
+    tBTA_OP_FMT_MASK    formats = BTUI_OPS_FORMATS;
+
+    APPL_TRACE_DEBUG2("scn %d, service name %s", scn, p_service_name);
+
+    sdp_handle = SDP_CreateRecord();
+
+    /* add service class */
+    if (SDP_AddServiceClassIdList(sdp_handle, 1, &servclass))
+    {
+        /* add protocol list, including RFCOMM scn */
+        protoList[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        protoList[0].num_params = 0;
+        protoList[1].protocol_uuid = UUID_PROTOCOL_RFCOMM;
+        protoList[1].num_params = 1;
+        protoList[1].params[0] = scn;
+        protoList[2].protocol_uuid = UUID_PROTOCOL_OBEX;
+        protoList[2].num_params = 0;
+
+        if (SDP_AddProtocolList(sdp_handle, BTA_OPS_PROTOCOL_COUNT, protoList))
+        {
+            SDP_AddAttribute(sdp_handle,
+               (UINT16)ATTR_ID_SERVICE_NAME,
+                (UINT8)TEXT_STR_DESC_TYPE,
+                (UINT32)(strlen(p_service_name) + 1),
+                (UINT8 *)p_service_name);
+
+            SDP_AddProfileDescriptorList(sdp_handle,
+                UUID_SERVCLASS_OBEX_OBJECT_PUSH,
+                0x0100);
+        }
+    }
+
+    /* Make the service browseable */
+    browse = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    SDP_AddUuidSequence (sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, &browse);
+
+    /* add sequence for supported types */
+    for (i = 0, j = 0; i < BTA_OPS_NUM_FMTS; i++)
+    {
+        if ((formats >> i) & 1)
+        {
+            type_value[j] = (UINT8 *) &bta_ops_obj_fmt[i];
+            desc_type[j] = UINT_DESC_TYPE;
+            type_len[j++] = 1;
+        }
+    }
+
+    SDP_AddSequence(sdp_handle, (UINT16) ATTR_ID_SUPPORTED_FORMATS_LIST,
+        (UINT8) j, desc_type, type_len, type_value);
+
+    /* set class of device */
+    cod.service = BTM_COD_SERVICE_OBJ_TRANSFER;
+    utl_set_device_class(&cod, BTA_UTL_SET_COD_SERVICE_CLASS);
+
+    bta_sys_add_uuid(servclass); /* UUID_SERVCLASS_OBEX_OBJECT_PUSH */
+
+    return sdp_handle;
+}
+#define SPP_NUM_PROTO_ELEMS 2
+static int add_spp_sdp(const char *service_name, int scn)
+{
+    UINT16 serviceclassid = UUID_SERVCLASS_SERIAL_PORT;
+    tSDP_PROTOCOL_ELEM  proto_elem_list[SPP_NUM_PROTO_ELEMS];
+    int              sdp_handle;
+
+    APPL_TRACE_DEBUG2("scn %d, service name %s", scn, service_name);
+
+    /* register the service */
+    if ((sdp_handle = SDP_CreateRecord()) != FALSE)
+    {
+        /*** Fill out the protocol element sequence for SDP ***/
+        proto_elem_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+        proto_elem_list[0].num_params = 0;
+        proto_elem_list[1].protocol_uuid = UUID_PROTOCOL_RFCOMM;
+        proto_elem_list[1].num_params = 1;
+
+        proto_elem_list[1].params[0] = scn;
+
+        if (SDP_AddProtocolList(sdp_handle, SPP_NUM_PROTO_ELEMS, proto_elem_list))
+        {
+            if (SDP_AddServiceClassIdList(sdp_handle, 1, &serviceclassid))
+            {
+                if ((SDP_AddAttribute(sdp_handle, ATTR_ID_SERVICE_NAME,
+                                TEXT_STR_DESC_TYPE, (UINT32)(strlen(service_name)+1),
+                                (UINT8 *)service_name)))
+                {
+                    UINT16  list[1];
+                    /* Make the service browseable */
+                    list[0] = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+                    SDP_AddUuidSequence (sdp_handle,  ATTR_ID_BROWSE_GROUP_LIST,
+                                    1, list);
+                }
+            }
+        }
+    }
+    return sdp_handle;
+}
+
+
+
+static int add_rfc_sdp_by_uuid(const char* name, const uint8_t* uuid, int scn)
+{
+    int handle = 0;
+
+    APPL_TRACE_DEBUG2("name:%s, scn:%d", name, scn);
+
+    /*
+        Bluetooth Socket API relies on having preregistered bluez sdp records for HSAG, HFAG, OPP & PBAP
+        that are mapped to rc chan 10, 11,12 & 19. Today HSAG and HFAG is routed to BRCM AG and are not
+        using BT socket API so for now we will need to support OPP and PBAP to enable 3rd party developer
+        apps running on BRCM Android.
+
+        To do this we will check the UUID for the requested service and mimic the SDP records of bluez
+        upon reception.  See functions add_opush() and add_pbap() in sdptool.c for actual records
+    */
+
+    /* special handling for preregistered bluez services (OPP, PBAP) that we need to mimic */
+
+    int final_scn = get_reserved_rfc_channel(uuid);
+    if (final_scn == -1)
+    {
+        final_scn=scn;
+    }
+    if (IS_UUID(UUID_OBEX_OBJECT_PUSH,uuid))
+    {
+        handle = add_ops_sdp(name,final_scn);
+    }
+    else if (IS_UUID(UUID_PBAP_PSE,uuid))
+    {
+        handle = add_pbap_sdp(name, final_scn); //PBAP Server is always 19
+    }
+    else if (IS_UUID(UUID_SPP, uuid))
+    {
+        handle = add_spp_sdp(name, final_scn);
+    }
+    else
+    {
+        handle = add_sdp_by_uuid(name, uuid, final_scn);
+    }
+    return handle;
+}
+
+BOOLEAN is_reserved_rfc_channel(int scn)
+{
+    switch(scn)
+    {
+        case RESERVED_SCN_PBS:
+        case RESERVED_SCN_OPS:
+            return TRUE;
+    }
+    return FALSE;
+}
+
+
+int get_reserved_rfc_channel (const uint8_t* uuid)
+{
+    if (IS_UUID(UUID_PBAP_PSE,uuid))
+    {
+      return RESERVED_SCN_PBS;
+    }
+    else if (IS_UUID(UUID_OBEX_OBJECT_PUSH,uuid))
+    {
+      return RESERVED_SCN_OPS;
+    }
+    return -1;
+}
+
+int add_rfc_sdp_rec(const char* name, const uint8_t* uuid, int scn)
+{
+    int sdp_handle = 0;
+    if(is_uuid_empty(uuid))
+    {
+        switch(scn)
+        {
+            case RESERVED_SCN_PBS: // PBAP Reserved port
+                uuid = UUID_PBAP_PSE;
+                break;
+             case RESERVED_SCN_OPS:
+                uuid = UUID_OBEX_OBJECT_PUSH;
+                break;
+            default:
+                uuid = UUID_SPP;
+                break;
+        }
+    }
+    sdp_handle = add_rfc_sdp_by_uuid(name, uuid, scn);
+    return sdp_handle;
+}
+
+void del_rfc_sdp_rec(int handle)
+{
+    if(handle != -1 && handle != 0)
+        SDP_DeleteRecord( handle );
+}
+
diff --git a/btif/src/btif_sock_thread.c b/btif/src/btif_sock_thread.c
new file mode 100644
index 0000000..475b8de
--- /dev/null
+++ b/btif/src/btif_sock_thread.c
@@ -0,0 +1,593 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_sock_thread.c
+ *
+ *  Description:   socket select thread
+ *
+ *
+ ***********************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_sock.h>
+
+//bta_jv_co_rfc_data
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <time.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <signal.h>
+#include <pthread.h>
+#include <ctype.h>
+
+#include <sys/select.h>
+#include <sys/poll.h>
+#include <cutils/sockets.h>
+#include <alloca.h>
+
+#define LOG_TAG "BTIF_SOCK"
+#include "btif_common.h"
+#include "btif_util.h"
+
+#include "bd.h"
+
+#include "bta_api.h"
+#include "btif_sock.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_util.h"
+
+#include <cutils/log.h>
+#define asrt(s) if(!(s)) APPL_TRACE_ERROR3("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+#define print_events(events) do { \
+    APPL_TRACE_DEBUG1("print poll event:%x", events); \
+    if (events & POLLIN) APPL_TRACE_DEBUG0(  "   POLLIN "); \
+    if (events & POLLPRI) APPL_TRACE_DEBUG0( "   POLLPRI "); \
+    if (events & POLLOUT) APPL_TRACE_DEBUG0( "   POLLOUT "); \
+    if (events & POLLERR) APPL_TRACE_DEBUG0( "   POLLERR "); \
+    if (events & POLLHUP) APPL_TRACE_DEBUG0( "   POLLHUP "); \
+    if (events & POLLNVAL) APPL_TRACE_DEBUG0("   POLLNVAL "); \
+    if (events & POLLRDHUP) APPL_TRACE_DEBUG0("   POLLRDHUP"); \
+    } while(0)
+
+#define MAX_THREAD 8
+#define MAX_POLL 64
+#define POLL_EXCEPTION_EVENTS (POLLHUP | POLLRDHUP | POLLERR | POLLNVAL)
+#define IS_EXCEPTION(e) ((e) & POLL_EXCEPTION_EVENTS)
+#define IS_READ(e) ((e) & POLLIN)
+#define IS_WRITE(e) ((e) & POLLOUT)
+/*cmd executes in socket poll thread */
+#define CMD_WAKEUP       1
+#define CMD_EXIT         2
+#define CMD_ADD_FD       3
+#define CMD_USER_PRIVATE 4
+
+typedef struct {
+    struct pollfd pfd;
+    uint32_t user_id;
+    int type;
+    int flags;
+} poll_slot_t;
+typedef struct {
+    int cmd_fdr, cmd_fdw;
+    int poll_count;
+    poll_slot_t ps[MAX_POLL];
+    int psi[MAX_POLL]; //index of poll slot
+    volatile pid_t thread_id;
+    btsock_signaled_cb callback;
+    btsock_cmd_cb cmd_callback;
+    int used;
+} thread_slot_t;
+static thread_slot_t ts[MAX_THREAD];
+
+
+
+static void *sock_poll_thread(void *arg);
+static inline void close_cmd_fd(int h);
+
+static inline void add_poll(int h, int fd, int type, int flags, uint32_t user_id);
+
+static pthread_mutex_t thread_slot_lock;
+
+
+static inline void set_socket_blocking(int s, int blocking)
+{
+    int opts;
+    opts = fcntl(s, F_GETFL);
+    if (opts<0) APPL_TRACE_ERROR1("set blocking (%s)", strerror(errno));
+    if(blocking)
+        opts &= ~O_NONBLOCK;
+    else opts |= O_NONBLOCK;
+    fcntl(s, F_SETFL, opts);
+}
+
+static inline int create_server_socket(const char* name)
+{
+    int s = socket(AF_LOCAL, SOCK_STREAM, 0);
+    APPL_TRACE_DEBUG1("covert name to android abstract name:%s", name);
+    if(socket_local_server_bind(s, name, ANDROID_SOCKET_NAMESPACE_ABSTRACT) >= 0)
+    {
+        if(listen(s, 5) == 0)
+        {
+            APPL_TRACE_DEBUG2("listen to local socket:%s, fd:%d", name, s);
+            return s;
+        }
+        else APPL_TRACE_ERROR3("listen to local socket:%s, fd:%d failed, errno:%d", name, s, errno);
+    }
+    else APPL_TRACE_ERROR3("create local socket:%s fd:%d, failed, errno:%d", name, s, errno);
+    close(s);
+    return -1;
+}
+static inline int connect_server_socket(const char* name)
+{
+    int s = socket(AF_LOCAL, SOCK_STREAM, 0);
+    set_socket_blocking(s, TRUE);
+    if(socket_local_client_connect(s, name, ANDROID_SOCKET_NAMESPACE_ABSTRACT, SOCK_STREAM) >= 0)
+    {
+        APPL_TRACE_DEBUG2("connected to local socket:%s, fd:%d", name, s);
+        return s;
+    }
+    else APPL_TRACE_ERROR3("connect to local socket:%s, fd:%d failed, errno:%d", name, s, errno);
+    close(s);
+    return -1;
+}
+static inline int accept_server_socket(int s)
+{
+    struct sockaddr_un client_address;
+    socklen_t clen;
+    int fd = accept(s, (struct sockaddr*)&client_address, &clen);
+    APPL_TRACE_DEBUG2("accepted fd:%d for server fd:%d", fd, s);
+    return fd;
+}
+static inline pthread_t create_thread(void *(*start_routine)(void *), void * arg)
+{
+    pthread_attr_t thread_attr;
+    pthread_attr_init(&thread_attr);
+    pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_JOINABLE);
+    pthread_t thread_id = -1;
+    if( pthread_create(&thread_id, &thread_attr, start_routine, arg)!=0 )
+    {
+        APPL_TRACE_ERROR1("pthread_create : %s", strerror(errno));
+        return -1;
+    }
+    return thread_id;
+}
+static void init_poll(int cmd_fd);
+static int alloc_thread_slot()
+{
+    int i;
+    //revserd order to save guard uninitialized access to 0 index
+    for(i = MAX_THREAD - 1; i >=0; i--)
+    {
+        APPL_TRACE_DEBUG2("ts[%d].used:%d", i, ts[i].used);
+        if(!ts[i].used)
+        {
+            ts[i].used = 1;
+            return i;
+        }
+    }
+    APPL_TRACE_ERROR0("execeeded max thread count");
+    return -1;
+}
+static void free_thread_slot(int h)
+{
+    if(0 <= h && h < MAX_THREAD)
+    {
+        close_cmd_fd(h);
+        ts[h].used = 0;
+    }
+    else APPL_TRACE_ERROR1("invalid thread handle:%d", h);
+}
+int btsock_thread_init()
+{
+    static int initialized;
+    APPL_TRACE_DEBUG1("in initialized:%d", initialized);
+    if(!initialized)
+    {
+        initialized = 1;
+        init_slot_lock(&thread_slot_lock);
+        int h;
+        for(h = 0; h < MAX_THREAD; h++)
+        {
+            ts[h].cmd_fdr = ts[h].cmd_fdw = -1;
+            ts[h].used = 0;
+            ts[h].thread_id = -1;
+            ts[h].poll_count = 0;
+            ts[h].callback = NULL;
+            ts[h].cmd_callback = NULL;
+        }
+    }
+    return TRUE;
+}
+int btsock_thread_create(btsock_signaled_cb callback, btsock_cmd_cb cmd_callback)
+{
+    int ret = FALSE;
+    asrt(callback || cmd_callback);
+    lock_slot(&thread_slot_lock);
+    int h = alloc_thread_slot();
+    unlock_slot(&thread_slot_lock);
+    APPL_TRACE_DEBUG1("alloc_thread_slot ret:%d", h);
+    if(h >= 0)
+    {
+        init_poll(h);
+        if((ts[h].thread_id = create_thread(sock_poll_thread, (void*)h)) != -1)
+        {
+            APPL_TRACE_DEBUG2("h:%d, thread id:%d", h, ts[h].thread_id);
+            ts[h].callback = callback;
+            ts[h].cmd_callback = cmd_callback;
+        }
+        else
+        {
+            free_thread_slot(h);
+            h = -1;
+        }
+    }
+    return h;
+}
+
+/* create dummy socket pair used to wake up select loop */
+static inline void init_cmd_fd(int h)
+{
+    asrt(ts[h].cmd_fdr == -1 && ts[h].cmd_fdw == -1);
+    if(socketpair(AF_UNIX, SOCK_STREAM, 0, &ts[h].cmd_fdr) < 0)
+    {
+        APPL_TRACE_ERROR1("socketpair failed: %s", strerror(errno));
+        return;
+    }
+    APPL_TRACE_DEBUG3("h:%d, cmd_fdr:%d, cmd_fdw:%d", h, ts[h].cmd_fdr, ts[h].cmd_fdw);
+    //add the cmd fd for read & write
+    add_poll(h, ts[h].cmd_fdr, 0, SOCK_THREAD_FD_RD, 0);
+}
+static inline void close_cmd_fd(int h)
+{
+    if(ts[h].cmd_fdr != -1)
+    {
+        close(ts[h].cmd_fdr);
+        ts[h].cmd_fdr = -1;
+    }
+    if(ts[h].cmd_fdw != -1)
+    {
+        close(ts[h].cmd_fdw);
+        ts[h].cmd_fdw = -1;
+    }
+}
+typedef struct
+{
+    int id;
+    int fd;
+    int type;
+    int flags;
+    uint32_t user_id;
+} sock_cmd_t;
+int btsock_thread_add_fd(int h, int fd, int type, int flags, uint32_t user_id)
+{
+    if(h < 0 || h >= MAX_THREAD)
+    {
+        APPL_TRACE_ERROR1("invalid bt thread handle:%d", h);
+        return FALSE;
+    }
+    if(ts[h].cmd_fdw == -1)
+    {
+        APPL_TRACE_ERROR0("cmd socket is not created. socket thread may not initialized");
+        return FALSE;
+    }
+    if(flags & SOCK_THREAD_ADD_FD_SYNC)
+    {
+        //must executed in socket poll thread
+        if(ts[h].thread_id == pthread_self())
+        {
+            //cleanup one-time flags
+            flags &= ~SOCK_THREAD_ADD_FD_SYNC;
+            add_poll(h, fd, type, flags, user_id);
+            return TRUE;
+        }
+        APPL_TRACE_DEBUG0("THREAD_ADD_FD_SYNC is not called in poll thread, fallback to async");
+    }
+    sock_cmd_t cmd = {CMD_ADD_FD, fd, type, flags, user_id};
+    APPL_TRACE_DEBUG2("adding fd:%d, flags:0x%x", fd, flags);
+    return send(ts[h].cmd_fdw, &cmd, sizeof(cmd), 0) == sizeof(cmd);
+}
+int btsock_thread_post_cmd(int h, int type, const unsigned char* data, int size, uint32_t user_id)
+{
+    if(h < 0 || h >= MAX_THREAD)
+    {
+        APPL_TRACE_ERROR1("invalid bt thread handle:%d", h);
+        return FALSE;
+    }
+    if(ts[h].cmd_fdw == -1)
+    {
+        APPL_TRACE_ERROR0("cmd socket is not created. socket thread may not initialized");
+        return FALSE;
+    }
+    sock_cmd_t cmd = {CMD_USER_PRIVATE, 0, type, size, user_id};
+    APPL_TRACE_DEBUG3("post cmd type:%d, size:%d, h:%d, ", type, size, h);
+    sock_cmd_t* cmd_send = &cmd;
+    int size_send = sizeof(cmd);
+    if(data && size)
+    {
+        size_send = sizeof(cmd) + size;
+        cmd_send = (sock_cmd_t*)alloca(size_send);
+        if(cmd_send)
+        {
+            *cmd_send = cmd;
+            memcpy(cmd_send + 1, data, size);
+        }
+        else
+        {
+            APPL_TRACE_ERROR3("alloca failed at h:%d, cmd type:%d, size:%d", h, type, size_send);
+            return FALSE;
+        }
+    }
+    return send(ts[h].cmd_fdw, cmd_send, size_send, 0) == size_send;
+}
+int btsock_thread_wakeup(int h)
+{
+    if(h < 0 || h >= MAX_THREAD)
+    {
+        APPL_TRACE_ERROR1("invalid bt thread handle:%d", h);
+        return FALSE;
+    }
+    if(ts[h].cmd_fdw == -1)
+    {
+        APPL_TRACE_ERROR1("thread handle:%d, cmd socket is not created", h);
+        return FALSE;
+    }
+    sock_cmd_t cmd = {CMD_WAKEUP, 0, 0, 0, 0};
+    return send(ts[h].cmd_fdw, &cmd, sizeof(cmd), 0) == sizeof(cmd);
+}
+int btsock_thread_exit(int h)
+{
+    if(h < 0 || h >= MAX_THREAD)
+    {
+        APPL_TRACE_ERROR1("invalid bt thread handle:%d", h);
+        return FALSE;
+    }
+    if(ts[h].cmd_fdw == -1)
+    {
+        APPL_TRACE_ERROR0("cmd socket is not created");
+        return FALSE;
+    }
+    sock_cmd_t cmd = {CMD_EXIT, 0, 0, 0, 0};
+    if(send(ts[h].cmd_fdw, &cmd, sizeof(cmd), 0) == sizeof(cmd))
+    {
+        pthread_join(ts[h].thread_id, 0);
+        lock_slot(&thread_slot_lock);
+        free_thread_slot(h);
+        unlock_slot(&thread_slot_lock);
+        return TRUE;
+    }
+    return FALSE;
+}
+static void init_poll(int h)
+{
+    int i;
+    ts[h].poll_count = 0;
+    ts[h].thread_id = -1;
+    ts[h].callback = NULL;
+    ts[h].cmd_callback = NULL;
+    for(i = 0; i < MAX_POLL; i++)
+    {
+        ts[h].ps[i].pfd.fd = -1;
+        ts[h].psi[i] = -1;
+    }
+    init_cmd_fd(h);
+}
+static inline unsigned int flags2pevents(int flags)
+{
+    unsigned int pevents = 0;
+    if(flags & SOCK_THREAD_FD_WR)
+        pevents |= POLLOUT;
+    if(flags & SOCK_THREAD_FD_RD)
+        pevents |= POLLIN;
+    pevents |= POLL_EXCEPTION_EVENTS;
+    return pevents;
+}
+
+static inline void set_poll(poll_slot_t* ps, int fd, int type, int flags, uint32_t user_id)
+{
+    ps->pfd.fd = fd;
+    ps->user_id = user_id;
+    if(ps->type != 0 && ps->type != type)
+        APPL_TRACE_ERROR2("poll socket type should not changed! type was:%d, type now:%d", ps->type, type);
+    ps->type = type;
+    ps->flags = flags;
+    ps->pfd.events = flags2pevents(flags);
+    ps->pfd.revents = 0;
+}
+static inline void add_poll(int h, int fd, int type, int flags, uint32_t user_id)
+{
+    asrt(fd != -1);
+    int i;
+    int empty = -1;
+    poll_slot_t* ps = ts[h].ps;
+
+    for(i = 0; i < MAX_POLL; i++)
+    {
+        if(ps[i].pfd.fd == fd)
+        {
+            asrt(ts[h].poll_count < MAX_POLL);
+
+            set_poll(&ps[i], fd, type, flags | ps[i].flags, user_id);
+            return;
+        }
+        else if(empty < 0 && ps[i].pfd.fd == -1)
+            empty = i;
+    }
+    if(empty >= 0)
+    {
+        asrt(ts[h].poll_count < MAX_POLL);
+        set_poll(&ps[empty], fd, type, flags, user_id);
+        ++ts[h].poll_count;
+        return;
+    }
+    APPL_TRACE_ERROR1("exceeded max poll slot:%d!", MAX_POLL);
+}
+static inline void remove_poll(int h, poll_slot_t* ps, int flags)
+{
+    if(flags == ps->flags)
+    {
+        //all monitored events signaled. To remove it, just clear the slot
+        --ts[h].poll_count;
+        memset(ps, 0, sizeof(*ps));
+        ps->pfd.fd = -1;
+    }
+    else
+    {
+        //one read or one write monitor event signaled, removed the accordding bit
+        ps->flags &= ~flags;
+        //update the poll events mask
+        ps->pfd.events = flags2pevents(ps->flags);
+    }
+}
+static int process_cmd_sock(int h)
+{
+    sock_cmd_t cmd = {-1, 0, 0, 0, 0};
+    int fd = ts[h].cmd_fdr;
+    if(recv(fd, &cmd, sizeof(cmd), MSG_WAITALL) != sizeof(cmd))
+    {
+        APPL_TRACE_ERROR1("recv cmd errno:%d", errno);
+        return FALSE;
+    }
+    APPL_TRACE_DEBUG1("cmd.id:%d", cmd.id);
+    switch(cmd.id)
+    {
+        case CMD_ADD_FD:
+            add_poll(h, cmd.fd, cmd.type, cmd.flags, cmd.user_id);
+            break;
+        case CMD_WAKEUP:
+            break;
+        case CMD_USER_PRIVATE:
+            asrt(ts[h].cmd_callback);
+            if(ts[h].cmd_callback)
+                ts[h].cmd_callback(fd, cmd.type, cmd.flags, cmd.user_id);
+            break;
+        case CMD_EXIT:
+            return FALSE;
+        default:
+            APPL_TRACE_DEBUG1("unknown cmd: %d", cmd.id);
+             break;
+    }
+    return TRUE;
+}
+static void process_data_sock(int h, struct pollfd *pfds, int count)
+{
+    asrt(count <= ts[h].poll_count);
+    int i;
+    for( i= 1; i < ts[h].poll_count; i++)
+    {
+        if(pfds[i].revents)
+        {
+            int ps_i = ts[h].psi[i];
+            asrt(pfds[i].fd == ts[h].ps[ps_i].pfd.fd);
+            uint32_t user_id = ts[h].ps[ps_i].user_id;
+            int type = ts[h].ps[ps_i].type;
+            int flags = 0;
+            print_events(pfds[i].revents);
+            if(IS_READ(pfds[i].revents))
+            {
+                flags |= SOCK_THREAD_FD_RD;
+            }
+            if(IS_WRITE(pfds[i].revents))
+            {
+                flags |= SOCK_THREAD_FD_WR;
+            }
+            if(IS_EXCEPTION(pfds[i].revents))
+            {
+                flags |= SOCK_THREAD_FD_EXCEPTION;
+                //remove the whole slot not flags
+                remove_poll(h, &ts[h].ps[ps_i], ts[h].ps[ps_i].flags);
+            }
+            else if(flags)
+                 remove_poll(h, &ts[h].ps[ps_i], flags); //remove the monitor flags that already processed
+            if(flags)
+                ts[h].callback(pfds[i].fd, type, flags, user_id);
+        }
+    }
+}
+
+static void prepare_poll_fds(int h, struct pollfd* pfds)
+{
+    int count = 0;
+    int ps_i = 0;
+    int pfd_i = 0;
+    asrt(ts[h].poll_count <= MAX_POLL);
+    memset(pfds, 0, sizeof(pfds[0])*ts[h].poll_count);
+    while(count < ts[h].poll_count)
+    {
+        if(ps_i >= MAX_POLL)
+        {
+            APPL_TRACE_ERROR4("exceed max poll range, ps_i:%d, MAX_POLL:%d, count:%d, ts[h].poll_count:%d",
+                    ps_i, MAX_POLL, count, ts[h].poll_count);
+            return;
+        }
+        if(ts[h].ps[ps_i].pfd.fd >= 0)
+        {
+            pfds[pfd_i] =  ts[h].ps[ps_i].pfd;
+            ts[h].psi[pfd_i] = ps_i;
+            count++;
+            pfd_i++;
+        }
+        ps_i++;
+    }
+}
+static void *sock_poll_thread(void *arg)
+{
+    struct pollfd pfds[MAX_POLL];
+    memset(pfds, 0, sizeof(pfds));
+    int h = (int)arg;
+    for(;;)
+    {
+        prepare_poll_fds(h, pfds);
+        int ret = poll(pfds, ts[h].poll_count, -1);
+        if(ret == -1)
+        {
+            APPL_TRACE_ERROR2("poll ret -1, exit the thread, errno:%d, err:%s", errno, strerror(errno));
+            break;
+        }
+        if(ret != 0)
+        {
+            int need_process_data_fd = TRUE;
+            if(pfds[0].revents) //cmd fd always is the first one
+            {
+                asrt(pfds[0].fd == ts[h].cmd_fdr);
+                if(!process_cmd_sock(h))
+                {
+                    APPL_TRACE_DEBUG1("h:%d, process_cmd_sock return false, exit...", h);
+                    break;
+                }
+                if(ret == 1)
+                    need_process_data_fd = FALSE;
+                else ret--; //exclude the cmd fd
+            }
+            if(need_process_data_fd)
+                process_data_sock(h, pfds, ret);
+        }
+        else {APPL_TRACE_DEBUG1("no data, select ret: %d", ret)};
+    }
+    ts[h].thread_id = -1;
+    APPL_TRACE_DEBUG1("socket poll thread exiting, h:%d", h);
+    return 0;
+}
+
diff --git a/btif/src/btif_sock_util.c b/btif/src/btif_sock_util.c
new file mode 100644
index 0000000..09df03e
--- /dev/null
+++ b/btif/src/btif_sock_util.c
@@ -0,0 +1,266 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hf.c
+ *
+ *  Description:   Handsfree Profile Bluetooth Interface
+ *
+ *
+ ***********************************************************************************/
+#include <hardware/bluetooth.h>
+#include <hardware/bt_sock.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+
+#include <cutils/sockets.h>
+#include <netinet/tcp.h>
+
+
+#define LOG_TAG "BTIF_SOCK"
+#include "btif_common.h"
+#include "btif_util.h"
+
+#include "bd.h"
+
+#include "bta_api.h"
+#include "btif_sock_thread.h"
+#include "btif_sock_sdp.h"
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "sdp_api.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "bta_jv_api.h"
+#include "bta_jv_co.h"
+#include "port_api.h"
+
+#include <cutils/log.h>
+
+#define info(fmt, ...)  ALOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+int sock_send_all(int sock_fd, const uint8_t* buf, int len)
+{
+    int s = len;
+    int ret;
+    while(s)
+    {
+        do ret = send(sock_fd, buf, s, 0);
+        while(ret < 0 && errno == EINTR);
+        if(ret <= 0)
+        {
+            error("sock fd:%d send errno:%d, ret:%d", sock_fd, errno, ret);
+            return -1;
+        }
+        buf += ret;
+        s -= ret;
+    }
+    return len;
+}
+int sock_recv_all(int sock_fd, uint8_t* buf, int len)
+{
+    int r = len;
+    int ret = -1;
+    while(r)
+    {
+        do ret = recv(sock_fd, buf, r, MSG_WAITALL);
+        while(ret < 0 && errno == EINTR);
+        if(ret <= 0)
+        {
+            error("sock fd:%d recv errno:%d, ret:%d", sock_fd, errno, ret);
+            return -1;
+        }
+        buf += ret;
+        r -= ret;
+    }
+    return len;
+}
+
+int sock_send_fd(int sock_fd, const uint8_t* buf, int len, int send_fd)
+{
+    ssize_t ret;
+    struct msghdr msg;
+    unsigned char *buffer = (unsigned char *)buf;
+    memset(&msg, 0, sizeof(msg));
+
+    struct cmsghdr *cmsg;
+    char msgbuf[CMSG_SPACE(1)];
+    asrt(send_fd != -1);
+    if(sock_fd == -1 || send_fd == -1)
+        return -1;
+    // Add any pending outbound file descriptors to the message
+           // See "man cmsg" really
+    msg.msg_control = msgbuf;
+    msg.msg_controllen = sizeof msgbuf;
+    cmsg = CMSG_FIRSTHDR(&msg);
+    cmsg->cmsg_level = SOL_SOCKET;
+    cmsg->cmsg_type = SCM_RIGHTS;
+    cmsg->cmsg_len = CMSG_LEN(sizeof send_fd);
+    memcpy(CMSG_DATA(cmsg), &send_fd, sizeof send_fd);
+
+    // We only write our msg_control during the first write
+    int ret_len = len;
+    while (len > 0) {
+        struct iovec iv;
+        memset(&iv, 0, sizeof(iv));
+
+        iv.iov_base = buffer;
+        iv.iov_len = len;
+
+        msg.msg_iov = &iv;
+        msg.msg_iovlen = 1;
+
+        do {
+            ret = sendmsg(sock_fd, &msg, MSG_NOSIGNAL);
+        } while (ret < 0 && errno == EINTR);
+
+        if (ret < 0) {
+            error("fd:%d, send_fd:%d, sendmsg ret:%d, errno:%d, %s",
+                     sock_fd, send_fd, (int)ret, errno, strerror(errno));
+            ret_len = -1;
+            break;
+        }
+
+        buffer += ret;
+        len -= ret;
+
+        // Wipes out any msg_control too
+        memset(&msg, 0, sizeof(msg));
+    }
+    debug("close fd:%d after sent", send_fd);
+    close(send_fd);
+    return ret_len;
+}
+
+
+#define PRINT(s) __android_log_write(ANDROID_LOG_DEBUG, NULL, s)
+static const char* hex_table = "0123456789abcdef";
+static inline void byte2hex(const char* data, char** str)
+{
+    **str = hex_table[(*data >> 4) & 0xf];
+    ++*str;
+    **str = hex_table[*data & 0xf];
+    ++*str;
+}
+static inline void byte2char(const char* data, char** str)
+{
+    **str = *data < ' ' ? '.' : *data > '~' ? '.' : *data;
+    ++(*str);
+}
+static inline void word2hex(const char* data, char** hex)
+{
+    byte2hex(&data[1], hex);
+    byte2hex(&data[0], hex);
+}
+void dump_bin(const char* title, const char* data, int size)
+{
+    char line_buff[256];
+    char *line;
+    int i, j, addr;
+    const int width = 16;
+    ALOGD("%s, size:%d, dump started {", title, size);
+    if(size <= 0)
+        return;
+    //write offset
+    line = line_buff;
+    *line++ = ' ';
+    *line++ = ' ';
+    *line++ = ' ';
+    *line++ = ' ';
+    *line++ = ' ';
+    *line++ = ' ';
+    for(j = 0; j < width; j++)
+    {
+        byte2hex((const char*)&j, &line);
+        *line++ = ' ';
+    }
+    *line = 0;
+    PRINT(line_buff);
+
+    for(i = 0; i < size / width; i++)
+    {
+        line = line_buff;
+        //write address:
+        addr = i*width;
+        word2hex((const char*)&addr, &line);
+        *line++ = ':'; *line++ = ' ';
+        //write hex of data
+        for(j = 0; j < width; j++)
+        {
+            byte2hex(&data[j], &line);
+            *line++ = ' ';
+        }
+        //write char of data
+        for(j = 0; j < width; j++)
+            byte2char(data++, &line);
+        //wirte the end of line
+        *line = 0;
+        //output the line
+        PRINT(line_buff);
+    }
+    //last line of left over if any
+    int leftover = size % width;
+    if(leftover > 0)
+    {
+        line = line_buff;
+        //write address:
+        addr = i*width;
+        word2hex((const char*)&addr, &line);
+        *line++ = ':'; *line++ = ' ';
+        //write hex of data
+        for(j = 0; j < leftover; j++) {
+            byte2hex(&data[j], &line);
+            *line++ = ' ';
+        }
+        //write hex padding
+        for(; j < width; j++) {
+            *line++ = ' ';
+            *line++ = ' ';
+            *line++ = ' ';
+        }
+        //write char of data
+        for(j = 0; j < leftover; j++)
+            byte2char(data++, &line);
+        //write the end of line
+        *line = 0;
+        //output the line
+        PRINT(line_buff);
+    }
+    ALOGD("%s, size:%d, dump ended }", title, size);
+}
+
diff --git a/btif/src/btif_storage.c b/btif/src/btif_storage.c
new file mode 100755
index 0000000..6d702a7
--- /dev/null
+++ b/btif/src/btif_storage.c
@@ -0,0 +1,1410 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_storage.c
+ *
+ *  Description:   Stores the local BT adapter and remote device properties in
+ *                 NVRAM storage, typically as xml file in the
+ *                 mobile's filesystem
+ *
+ *
+ */
+#include <stdlib.h>
+#include <time.h>
+#include <string.h>
+#include <ctype.h>
+#include <alloca.h>
+
+
+#include <hardware/bluetooth.h>
+#include "btif_config.h"
+#define LOG_TAG "BTIF_STORAGE"
+
+#include "btif_api.h"
+
+#include "btif_util.h"
+#include "bd.h"
+#include "gki.h"
+#include "bta_hh_api.h"
+#include "btif_hh.h"
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s(L%d): " fmt,__FUNCTION__, __LINE__,  ## __VA_ARGS__)
+#define warn(fmt, ...) ALOGW ("## WARNING : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s(L%d): " fmt "##",__FUNCTION__, __LINE__, ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+
+#define BTIF_STORAGE_PATH_BLUEDROID "/data/misc/bluedroid"
+
+//#define BTIF_STORAGE_PATH_ADAPTER_INFO "adapter_info"
+//#define BTIF_STORAGE_PATH_REMOTE_DEVICES "remote_devices"
+#define BTIF_STORAGE_PATH_REMOTE_DEVTIME "Timestamp"
+#define BTIF_STORAGE_PATH_REMOTE_DEVCLASS "DevClass"
+#define BTIF_STORAGE_PATH_REMOTE_DEVTYPE "DevType"
+#define BTIF_STORAGE_PATH_REMOTE_NAME "Name"
+//#define BTIF_STORAGE_PATH_REMOTE_LINKKEYS "remote_linkkeys"
+#define BTIF_STORAGE_PATH_REMOTE_ALIASE "Aliase"
+#define BTIF_STORAGE_PATH_REMOTE_SERVICE "Service"
+#define BTIF_STORAGE_PATH_REMOTE_HIDINFO "HidInfo"
+#define BTIF_STORAGE_KEY_ADAPTER_NAME "Name"
+#define BTIF_STORAGE_KEY_ADAPTER_SCANMODE "ScanMode"
+#define BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT "DiscoveryTimeout"
+
+
+#define BTIF_AUTO_PAIR_CONF_FILE  "/etc/bluetooth/auto_pair_devlist.conf"
+#define BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST "AutoPairBlacklist"
+#define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR "AddressBlacklist"
+#define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME "ExactNameBlacklist"
+#define BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME "PartialNameBlacklist"
+#define BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST "FixedPinZerosKeyboardBlacklist"
+#define BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR "DynamicAddressBlacklist"
+
+#define BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR ","
+#define BTIF_AUTO_PAIR_CONF_SPACE ' '
+#define BTIF_AUTO_PAIR_CONF_COMMENT '#'
+#define BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER "="
+
+
+/* This is a local property to add a device found */
+#define BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP 0xFF
+
+#define BTIF_STORAGE_GET_ADAPTER_PROP(t,v,l,p) \
+      {p.type=t;p.val=v;p.len=l; btif_storage_get_adapter_property(&p);}
+
+#define BTIF_STORAGE_GET_REMOTE_PROP(b,t,v,l,p) \
+      {p.type=t;p.val=v;p.len=l;btif_storage_get_remote_device_property(b,&p);}
+
+#define STORAGE_BDADDR_STRING_SZ           (18)      /* 00:11:22:33:44:55 */
+#define STORAGE_UUID_STRING_SIZE           (36+1)    /* 00001200-0000-1000-8000-00805f9b34fb; */
+#define STORAGE_PINLEN_STRING_MAX_SIZE     (2)       /* ascii pinlen max chars */
+#define STORAGE_KEYTYPE_STRING_MAX_SIZE    (1)       /* ascii keytype max chars */
+
+#define STORAGE_KEY_TYPE_MAX               (10)
+
+#define STORAGE_HID_ATRR_MASK_SIZE           (4)
+#define STORAGE_HID_SUB_CLASS_SIZE           (2)
+#define STORAGE_HID_APP_ID_SIZE              (2)
+#define STORAGE_HID_VENDOR_ID_SIZE           (4)
+#define STORAGE_HID_PRODUCT_ID_SIZE          (4)
+#define STORAGE_HID_VERSION_SIZE             (4)
+#define STORAGE_HID_CTRY_CODE_SIZE           (2)
+#define STORAGE_HID_DESC_LEN_SIZE            (4)
+#define STORAGE_HID_DESC_MAX_SIZE            (2*512)
+
+/* <18 char bd addr> <space> LIST< <36 char uuid> <;> > <keytype (dec)> <pinlen> */
+#define BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX (STORAGE_BDADDR_STRING_SZ + 1 +\
+                                             STORAGE_UUID_STRING_SIZE*BT_MAX_NUM_UUIDS + \
+                                             STORAGE_PINLEN_STRING_MAX_SIZE +\
+                                             STORAGE_KEYTYPE_STRING_MAX_SIZE)
+
+#define STORAGE_REMOTE_LINKKEYS_ENTRY_SIZE (LINK_KEY_LEN*2 + 1 + 2 + 1 + 2)
+
+/* <18 char bd addr> <space>LIST <attr_mask> <space> > <sub_class> <space> <app_id> <space>
+                                <vendor_id> <space> > <product_id> <space> <version> <space>
+                                <ctry_code> <space> > <desc_len> <space> <desc_list> <space> */
+#define BTIF_HID_INFO_ENTRY_SIZE_MAX    (STORAGE_BDADDR_STRING_SZ + 1 +\
+                                         STORAGE_HID_ATRR_MASK_SIZE + 1 +\
+                                         STORAGE_HID_SUB_CLASS_SIZE + 1 +\
+                                         STORAGE_HID_APP_ID_SIZE+ 1 +\
+                                         STORAGE_HID_VENDOR_ID_SIZE+ 1 +\
+                                         STORAGE_HID_PRODUCT_ID_SIZE+ 1 +\
+                                         STORAGE_HID_VERSION_SIZE+ 1 +\
+                                         STORAGE_HID_CTRY_CODE_SIZE+ 1 +\
+                                         STORAGE_HID_DESC_LEN_SIZE+ 1 +\
+                                         STORAGE_HID_DESC_MAX_SIZE+ 1 )
+
+
+/* currently remote services is the potentially largest entry */
+#define BTIF_STORAGE_MAX_LINE_SZ BTIF_REMOTE_SERVICES_ENTRY_SIZE_MAX
+
+
+/* check against unv max entry size at compile time */
+#if (BTIF_STORAGE_ENTRY_MAX_SIZE > UNV_MAXLINE_LENGTH)
+    #error "btif storage entry size exceeds unv max line size"
+#endif
+
+
+#define BTIF_STORAGE_HL_APP          "hl_app"
+#define BTIF_STORAGE_HL_APP_CB       "hl_app_cb"
+#define BTIF_STORAGE_HL_APP_DATA     "hl_app_data_"
+#define BTIF_STORAGE_HL_APP_MDL_DATA "hl_app_mdl_data_"
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+typedef struct
+{
+    uint32_t num_devices;
+    bt_bdaddr_t devices[BTM_SEC_MAX_DEVICE_RECORDS];
+} btif_bonded_devices_t;
+
+/************************************************************************************
+**  Extern variables
+************************************************************************************/
+extern UINT16 bta_service_id_to_uuid_lkup_tbl [BTA_MAX_SERVICE_ID];
+extern bt_bdaddr_t btif_local_bd_addr;
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+/*******************************************************************************
+**
+** Function         btif_in_make_filename
+**
+** Description      Internal helper function to create NVRAM file path
+**                  from address and filename
+**
+** Returns          NVRAM file path if successfull, NULL otherwise
+**
+*******************************************************************************/
+static char* btif_in_make_filename(bt_bdaddr_t *bd_addr, char *fname)
+{
+    static char path[256];
+    bdstr_t bdstr;
+
+    if (fname == NULL)return NULL;
+    if (bd_addr)
+    {
+        sprintf(path, "%s/%s/%s", BTIF_STORAGE_PATH_BLUEDROID,
+                bd2str(bd_addr, &bdstr), fname);
+    }
+    else
+    {
+        /* local adapter */
+        sprintf(path, "%s/LOCAL/%s", BTIF_STORAGE_PATH_BLUEDROID, fname);
+    }
+
+    return(char*)path;
+}
+/*******************************************************************************
+**
+** Function         btif_in_split_uuids_string_to_list
+**
+** Description      Internal helper function to split the string of UUIDs
+**                  read from the NVRAM to an array
+**
+** Returns          None
+**
+*******************************************************************************/
+static void btif_in_split_uuids_string_to_list(char *str, bt_uuid_t *p_uuid,
+                                               uint32_t *p_num_uuid)
+{
+    char buf[64];
+    char *p_start = str;
+    char *p_needle;
+    uint32_t num = 0;
+    do
+    {
+        //p_needle = strchr(p_start, ';');
+        p_needle = strchr(p_start, ' ');
+        if (p_needle < p_start) break;
+        memset(buf, 0, sizeof(buf));
+        strncpy(buf, p_start, (p_needle-p_start));
+        string_to_uuid(buf, p_uuid + num);
+        num++;
+        p_start = ++p_needle;
+
+    } while (*p_start != 0);
+    *p_num_uuid = num;
+}
+static int prop2cfg(bt_bdaddr_t *remote_bd_addr, bt_property_t *prop)
+{
+    bdstr_t bdstr = {0};
+    if(remote_bd_addr)
+        bd2str(remote_bd_addr, &bdstr);
+    debug("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type, prop->len);
+    char value[1024];
+    if(prop->len <= 0 || prop->len > (int)sizeof(value) - 1)
+    {
+        error("property type:%d, len:%d is invalid", prop->type, prop->len);
+        return FALSE;
+    }
+    switch(prop->type)
+    {
+       case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP:
+            btif_config_set_int("Remote", bdstr,
+                                BTIF_STORAGE_PATH_REMOTE_DEVTIME, (int)time(NULL));
+            break;
+        case BT_PROPERTY_BDNAME:
+            strncpy(value, (char*)prop->val, prop->len);
+            value[prop->len]='\0';
+            if(remote_bd_addr)
+                btif_config_set_str("Remote", bdstr,
+                                BTIF_STORAGE_PATH_REMOTE_NAME, value);
+            else btif_config_set_str("Local", "Adapter",
+                                BTIF_STORAGE_KEY_ADAPTER_NAME, value);
+            break;
+        case BT_PROPERTY_REMOTE_FRIENDLY_NAME:
+            strncpy(value, (char*)prop->val, prop->len);
+            value[prop->len]='\0';
+            btif_config_set_str("Remote", bdstr, BTIF_STORAGE_PATH_REMOTE_ALIASE, value);
+            break;
+        case BT_PROPERTY_ADAPTER_SCAN_MODE:
+            btif_config_set_int("Local", "Adapter",
+                                BTIF_STORAGE_KEY_ADAPTER_SCANMODE, *(int*)prop->val);
+            break;
+        case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
+            btif_config_set_int("Local", "Adapter",
+                                BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT, *(int*)prop->val);
+            break;
+        case BT_PROPERTY_CLASS_OF_DEVICE:
+            btif_config_set_int("Remote", bdstr,
+                                BTIF_STORAGE_PATH_REMOTE_DEVCLASS, *(int*)prop->val);
+            break;
+        case BT_PROPERTY_TYPE_OF_DEVICE:
+            btif_config_set_int("Remote", bdstr,
+                                BTIF_STORAGE_PATH_REMOTE_DEVTYPE, *(int*)prop->val);
+            break;
+        case BT_PROPERTY_UUIDS:
+        {
+            uint32_t i;
+            char buf[64];
+            value[0] = 0;
+            for (i=0; i < (prop->len)/sizeof(bt_uuid_t); i++)
+            {
+                bt_uuid_t *p_uuid = (bt_uuid_t*)prop->val + i;
+                memset(buf, 0, sizeof(buf));
+                uuid_to_string(p_uuid, buf);
+                strcat(value, buf);
+                //strcat(value, ";");
+                strcat(value, " ");
+            }
+            btif_config_set_str("Remote", bdstr, BTIF_STORAGE_PATH_REMOTE_SERVICE, value);
+            btif_config_save();
+            break;
+        }
+        default:
+             error("Unknow prop type:%d", prop->type);
+             return FALSE;
+    }
+    return TRUE;
+}
+static int cfg2prop(bt_bdaddr_t *remote_bd_addr, bt_property_t *prop)
+{
+    bdstr_t bdstr = {0};
+    if(remote_bd_addr)
+        bd2str(remote_bd_addr, &bdstr);
+    debug("in, bd addr:%s, prop type:%d, len:%d", bdstr, prop->type, prop->len);
+    if(prop->len <= 0)
+    {
+        error("property type:%d, len:%d is invalid", prop->type, prop->len);
+        return FALSE;
+    }
+    int ret = FALSE;
+    switch(prop->type)
+    {
+       case BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP:
+            if(prop->len >= (int)sizeof(int))
+                ret = btif_config_get_int("Remote", bdstr,
+                                        BTIF_STORAGE_PATH_REMOTE_DEVTIME, (int*)prop->val);
+            break;
+        case BT_PROPERTY_BDNAME:
+        {
+            int len = prop->len;
+            if(remote_bd_addr)
+                ret = btif_config_get_str("Remote", bdstr,
+                                        BTIF_STORAGE_PATH_REMOTE_NAME, (char*)prop->val, &len);
+            else ret = btif_config_get_str("Local", "Adapter",
+                                        BTIF_STORAGE_KEY_ADAPTER_NAME, (char*)prop->val, &len);
+            if(ret && len && len <= prop->len)
+                prop->len = len - 1;
+            else
+            {
+                prop->len = 0;
+                ret = FALSE;
+            }
+            break;
+        }
+        case BT_PROPERTY_REMOTE_FRIENDLY_NAME:
+        {
+            int len = prop->len;
+            ret = btif_config_get_str("Remote", bdstr,
+                                       BTIF_STORAGE_PATH_REMOTE_ALIASE, (char*)prop->val, &len);
+            if(ret && len && len <= prop->len)
+                prop->len = len - 1;
+            else
+            {
+                prop->len = 0;
+                ret = FALSE;
+            }
+            break;
+        }
+        case BT_PROPERTY_ADAPTER_SCAN_MODE:
+           if(prop->len >= (int)sizeof(int))
+                ret = btif_config_get_int("Local", "Adapter",
+                                          BTIF_STORAGE_KEY_ADAPTER_SCANMODE, (int*)prop->val);
+           break;
+        case BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT:
+           if(prop->len >= (int)sizeof(int))
+                ret = btif_config_get_int("Local", "Adapter",
+                                          BTIF_STORAGE_KEY_ADAPTER_DISC_TIMEOUT, (int*)prop->val);
+            break;
+        case BT_PROPERTY_CLASS_OF_DEVICE:
+            if(prop->len >= (int)sizeof(int))
+                ret = btif_config_get_int("Remote", bdstr,
+                                BTIF_STORAGE_PATH_REMOTE_DEVCLASS, (int*)prop->val);
+            break;
+        case BT_PROPERTY_TYPE_OF_DEVICE:
+            if(prop->len >= (int)sizeof(int))
+                ret = btif_config_get_int("Remote",
+                                    bdstr, BTIF_STORAGE_PATH_REMOTE_DEVTYPE, (int*)prop->val);
+            break;
+        case BT_PROPERTY_UUIDS:
+        {
+            char value[1280];
+            int size = sizeof(value);
+            if(btif_config_get_str("Remote", bdstr,
+                                    BTIF_STORAGE_PATH_REMOTE_SERVICE, value, &size))
+            {
+                bt_uuid_t *p_uuid = (bt_uuid_t*)prop->val;
+                uint32_t num_uuids = 0;
+                btif_in_split_uuids_string_to_list(value, p_uuid, &num_uuids);
+                prop->len = num_uuids * sizeof(bt_uuid_t);
+                ret = TRUE;
+            }
+            break;
+        }
+        default:
+            error("Unknow prop type:%d", prop->type);
+            return FALSE;
+    }
+    return ret;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_in_fetch_bonded_devices
+**
+** Description      Internal helper function to fetch the bonded devices
+**                  from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+static bt_status_t btif_in_fetch_bonded_devices(btif_bonded_devices_t *p_bonded_devices, int add)
+{
+    debug("in add:%d", add);
+    memset(p_bonded_devices, 0, sizeof(btif_bonded_devices_t));
+
+    char kname[128], vname[128];
+    short kpos;
+    int kname_size;
+    kname_size = sizeof(kname);
+    kname[0] = 0;
+    kpos = 0;
+    do
+    {
+        kpos = btif_config_next_key(kpos, "Remote", kname, &kname_size);
+        debug("Remote device:%s, size:%d", kname, kname_size);
+        int type = BTIF_CFG_TYPE_BIN;
+        LINK_KEY link_key;
+        int size = sizeof(link_key);
+        if(btif_config_get("Remote", kname, "LinkKey", (char*)link_key, &size, &type))
+        {
+            int linkkey_type;
+            if(btif_config_get_int("Remote", kname, "LinkKeyType", &linkkey_type))
+            {
+                //int pin_len;
+                //btif_config_get_int("Remote", kname, "PinLength", &pin_len))
+                bt_bdaddr_t bd_addr;
+                str2bd(kname, &bd_addr);
+                if(add)
+                {
+                    DEV_CLASS dev_class = {0, 0, 0};
+                    int cod;
+                    if(btif_config_get_int("Remote", kname, "DevClass", &cod))
+                        uint2devclass((UINT32)cod, dev_class);
+                    BTA_DmAddDevice(bd_addr.address, dev_class, link_key, 0, 0, (UINT8)linkkey_type, 0);
+                }
+                memcpy(&p_bonded_devices->devices[p_bonded_devices->num_devices++], &bd_addr, sizeof(bt_bdaddr_t));
+            }
+            else error("bounded device:%s, LinkKeyType or PinLength is invalid", kname);
+        }
+        else debug("Remote device:%s, no link key", kname);
+        kname_size = sizeof(kname);
+        kname[0] = 0;
+    } while(kpos != -1);
+    debug("out");
+    return BT_STATUS_SUCCESS;
+}
+
+static int hex_str_to_int(const char* str, int size)
+{
+    int  n = 0;
+    char c = *str++;
+    while (size-- != 0)
+    {
+        n <<= 4;
+        if (c >= '0' && c <= '9') {
+            n |= c - '0';
+        }
+        else if (c >= 'a' && c <= 'z') {
+            n |= c - 'a' + 10;
+        }
+        else // (c >= 'A' && c <= 'Z')
+        {
+            n |= c - 'A' + 10;
+        }
+
+        c = *str++;
+    }
+    return n;
+}
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+/** functions are synchronous.
+ * functions can be called by both internal modules such as BTIF_DM and by external entiries from HAL via BTIF_context_switch
+ * For OUT parameters,  caller is expected to provide the memory.
+ * Caller is expected to provide a valid pointer to 'property->value' based on the property->type
+ */
+/*******************************************************************************
+**
+** Function         btif_storage_get_adapter_property
+**
+** Description      BTIF storage API - Fetches the adapter property->type
+**                  from NVRAM and fills property->val.
+**                  Caller should provide memory for property->val and
+**                  set the property->val
+**
+** Returns          BT_STATUS_SUCCESS if the fetch was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_get_adapter_property(bt_property_t *property)
+{
+
+    /* Special handling for adapter BD_ADDR and BONDED_DEVICES */
+    if (property->type == BT_PROPERTY_BDADDR)
+    {
+        BD_ADDR addr;
+        bt_bdaddr_t *bd_addr = (bt_bdaddr_t*)property->val;
+        /* This has been cached in btif. Just fetch it from there */
+        memcpy(bd_addr, &btif_local_bd_addr, sizeof(bt_bdaddr_t));
+        property->len = sizeof(bt_bdaddr_t);
+        return BT_STATUS_SUCCESS;
+    }
+    else if (property->type == BT_PROPERTY_ADAPTER_BONDED_DEVICES)
+    {
+        btif_bonded_devices_t bonded_devices;
+
+        btif_in_fetch_bonded_devices(&bonded_devices, 0);
+
+        BTIF_TRACE_DEBUG2("%s: Number of bonded devices: %d Property:BT_PROPERTY_ADAPTER_BONDED_DEVICES", __FUNCTION__, bonded_devices.num_devices);
+
+        if (bonded_devices.num_devices > 0)
+        {
+            property->len = bonded_devices.num_devices * sizeof(bt_bdaddr_t);
+            memcpy(property->val, bonded_devices.devices, property->len);
+        }
+
+        /* if there are no bonded_devices, then length shall be 0 */
+        return BT_STATUS_SUCCESS;
+    }
+    else if (property->type == BT_PROPERTY_UUIDS)
+    {
+        /* publish list of local supported services */
+        bt_uuid_t *p_uuid = (bt_uuid_t*)property->val;
+        uint32_t num_uuids = 0;
+        uint32_t i;
+
+        tBTA_SERVICE_MASK service_mask = btif_get_enabled_services_mask();
+        BTIF_TRACE_ERROR2("%s service_mask:0x%x", __FUNCTION__, service_mask);
+        for (i=0; i < BTA_MAX_SERVICE_ID; i++)
+        {
+            /* This should eventually become a function when more services are enabled */
+            if (service_mask
+                &(tBTA_SERVICE_MASK)(1 << i))
+            {
+                switch (i)
+                {
+                    case BTA_HFP_SERVICE_ID:
+                        {
+                            uuid16_to_uuid128(UUID_SERVCLASS_AG_HANDSFREE,
+                                              p_uuid+num_uuids);
+                            num_uuids++;
+                        }
+                    /* intentional fall through: Send both BFP & HSP UUIDs if HFP is enabled */
+                    case BTA_HSP_SERVICE_ID:
+                        {
+                            uuid16_to_uuid128(UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
+                                              p_uuid+num_uuids);
+                            num_uuids++;
+                        }break;
+                    case BTA_A2DP_SERVICE_ID:
+                        {
+                            uuid16_to_uuid128(UUID_SERVCLASS_AUDIO_SOURCE,
+                                              p_uuid+num_uuids);
+                            num_uuids++;
+                        }break;
+                }
+            }
+        }
+        property->len = (num_uuids)*sizeof(bt_uuid_t);
+        return BT_STATUS_SUCCESS;
+    }
+
+    /* fall through for other properties */
+    if(!cfg2prop(NULL, property))
+    {
+        return btif_dm_get_adapter_property(property);
+    }
+    return BT_STATUS_SUCCESS;
+ }
+
+/*******************************************************************************
+**
+** Function         btif_storage_set_adapter_property
+**
+** Description      BTIF storage API - Stores the adapter property
+**                  to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_set_adapter_property(bt_property_t *property)
+{
+    return prop2cfg(NULL, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_get_remote_device_property
+**
+** Description      BTIF storage API - Fetches the remote device property->type
+**                  from NVRAM and fills property->val.
+**                  Caller should provide memory for property->val and
+**                  set the property->val
+**
+** Returns          BT_STATUS_SUCCESS if the fetch was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_get_remote_device_property(bt_bdaddr_t *remote_bd_addr,
+                                                    bt_property_t *property)
+{
+    return cfg2prop(remote_bd_addr, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+}
+/*******************************************************************************
+**
+** Function         btif_storage_set_remote_device_property
+**
+** Description      BTIF storage API - Stores the remote device property
+**                  to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_set_remote_device_property(bt_bdaddr_t *remote_bd_addr,
+                                                    bt_property_t *property)
+{
+    return prop2cfg(remote_bd_addr, property) ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_remote_device
+**
+** Description      BTIF storage API - Adds a newly discovered device to NVRAM
+**                  along with the timestamp. Also, stores the various
+**                  properties - RSSI, BDADDR, NAME (if found in EIR)
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_remote_device(bt_bdaddr_t *remote_bdaddr,
+                                           uint32_t num_properties,
+                                           bt_property_t *properties)
+{
+    uint32_t i = 0;
+    /* TODO: If writing a property, fails do we go back undo the earlier
+     * written properties? */
+    for (i=0; i < num_properties; i++)
+    {
+        /* Ignore the RSSI as this is not stored in DB */
+        if (properties[i].type == BT_PROPERTY_REMOTE_RSSI)
+            continue;
+
+        /* BD_ADDR for remote device needs special handling as we also store timestamp */
+        if (properties[i].type == BT_PROPERTY_BDADDR)
+        {
+            bt_property_t addr_prop;
+            memcpy(&addr_prop, &properties[i], sizeof(bt_property_t));
+            addr_prop.type = BT_PROPERTY_REMOTE_DEVICE_TIMESTAMP;
+            btif_storage_set_remote_device_property(remote_bdaddr,
+                                                    &addr_prop);
+        }
+        else
+        {
+            btif_storage_set_remote_device_property(remote_bdaddr,
+                                                    &properties[i]);
+        }
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_bonded_device
+**
+** Description      BTIF storage API - Adds the newly bonded device to NVRAM
+**                  along with the link-key, Key type and Pin key length
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+
+bt_status_t btif_storage_add_bonded_device(bt_bdaddr_t *remote_bd_addr,
+                                           LINK_KEY link_key,
+                                           uint8_t key_type,
+                                           uint8_t pin_length)
+{
+    bdstr_t bdstr;
+    bd2str(remote_bd_addr, &bdstr);
+    int ret = btif_config_set_int("Remote", bdstr, "LinkKeyType", (int)key_type);
+    ret &= btif_config_set_int("Remote", bdstr, "PinLength", (int)pin_length);
+    ret &= btif_config_set("Remote", bdstr, "LinkKey", (const char*)link_key, sizeof(LINK_KEY), BTIF_CFG_TYPE_BIN);
+    btif_config_save();
+    return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_remove_bonded_device
+**
+** Description      BTIF storage API - Deletes the bonded device from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the deletion was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_remove_bonded_device(bt_bdaddr_t *remote_bd_addr)
+{
+    bdstr_t bdstr;
+    bd2str(remote_bd_addr, &bdstr);
+    debug("in bd addr:%s", bdstr);
+    int ret = btif_config_remove("Remote", bdstr, "LinkKeyType");
+    ret &= btif_config_remove("Remote", bdstr, "PinLength");
+    ret &= btif_config_remove("Remote", bdstr, "LinkKey");
+    btif_config_save();
+    return ret ? BT_STATUS_SUCCESS : BT_STATUS_FAIL;
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_load_bonded_devices
+**
+** Description      BTIF storage API - Loads all the bonded devices from NVRAM
+**                  and adds to the BTA.
+**                  Additionally, this API also invokes the adaper_properties_cb
+**                  and remote_device_properties_cb for each of the bonded devices.
+**
+** Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_load_bonded_devices(void)
+{
+    char *fname;
+    btif_bonded_devices_t bonded_devices;
+    uint32_t i = 0;
+    bt_property_t adapter_props[6];
+    uint32_t num_props = 0;
+    bt_property_t remote_properties[8];
+    bt_bdaddr_t addr;
+    bt_bdname_t name, alias;
+    bt_scan_mode_t mode;
+    uint32_t disc_timeout;
+    bt_bdaddr_t *devices_list;
+    bt_uuid_t local_uuids[BT_MAX_NUM_UUIDS];
+    bt_uuid_t remote_uuids[BT_MAX_NUM_UUIDS];
+    uint32_t cod, devtype;
+
+    btif_in_fetch_bonded_devices(&bonded_devices, 1);
+
+    /* Now send the adapter_properties_cb with all adapter_properties */
+    {
+        memset(adapter_props, 0, sizeof(adapter_props));
+
+        /* BD_ADDR */
+        BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_BDADDR, &addr, sizeof(addr),
+                                      adapter_props[num_props]);
+        num_props++;
+
+        /* BD_NAME */
+        BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_BDNAME, &name, sizeof(name),
+                                      adapter_props[num_props]);
+        num_props++;
+
+        /* SCAN_MODE */
+        /* TODO: At the time of BT on, always report the scan mode as 0 irrespective
+         of the scan_mode during the previous enable cycle.
+         This needs to be re-visited as part of the app/stack enable sequence
+         synchronization */
+        mode = BT_SCAN_MODE_NONE;
+        adapter_props[num_props].type = BT_PROPERTY_ADAPTER_SCAN_MODE;
+        adapter_props[num_props].len = sizeof(mode);
+        adapter_props[num_props].val = &mode;
+        num_props++;
+
+        /* DISC_TIMEOUT */
+        BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT,
+                                      &disc_timeout, sizeof(disc_timeout),
+                                      adapter_props[num_props]);
+        num_props++;
+
+        /* BONDED_DEVICES */
+        devices_list = (bt_bdaddr_t*)malloc(sizeof(bt_bdaddr_t)*bonded_devices.num_devices);
+        adapter_props[num_props].type = BT_PROPERTY_ADAPTER_BONDED_DEVICES;
+        adapter_props[num_props].len = bonded_devices.num_devices * sizeof(bt_bdaddr_t);
+        adapter_props[num_props].val = devices_list;
+        for (i=0; i < bonded_devices.num_devices; i++)
+        {
+            memcpy(devices_list + i, &bonded_devices.devices[i], sizeof(bt_bdaddr_t));
+        }
+        num_props++;
+
+        /* LOCAL UUIDs */
+        BTIF_STORAGE_GET_ADAPTER_PROP(BT_PROPERTY_UUIDS,
+                                      local_uuids, sizeof(local_uuids),
+                                      adapter_props[num_props]);
+        num_props++;
+
+        btif_adapter_properties_evt(BT_STATUS_SUCCESS, num_props, adapter_props);
+
+        free(devices_list);
+    }
+
+    BTIF_TRACE_EVENT2("%s: %d bonded devices found", __FUNCTION__, bonded_devices.num_devices);
+
+    {
+        for (i = 0; i < bonded_devices.num_devices; i++)
+        {
+            bt_bdaddr_t *p_remote_addr;
+
+            num_props = 0;
+            p_remote_addr = &bonded_devices.devices[i];
+            memset(remote_properties, 0, sizeof(remote_properties));
+            BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_BDNAME,
+                                         &name, sizeof(name),
+                                         remote_properties[num_props]);
+            num_props++;
+
+            BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_REMOTE_FRIENDLY_NAME,
+                                         &alias, sizeof(alias),
+                                         remote_properties[num_props]);
+            num_props++;
+
+            BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_CLASS_OF_DEVICE,
+                                         &cod, sizeof(cod),
+                                         remote_properties[num_props]);
+            num_props++;
+
+            BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_TYPE_OF_DEVICE,
+                                         &devtype, sizeof(devtype),
+                                         remote_properties[num_props]);
+            num_props++;
+
+            BTIF_STORAGE_GET_REMOTE_PROP(p_remote_addr, BT_PROPERTY_UUIDS,
+                                         remote_uuids, sizeof(remote_uuids),
+                                         remote_properties[num_props]);
+            num_props++;
+
+            btif_remote_properties_evt(BT_STATUS_SUCCESS, p_remote_addr,
+                                       num_props, remote_properties);
+        }
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_hid_device_info
+**
+** Description      BTIF storage API - Adds the hid information of bonded hid devices-to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the store was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+
+bt_status_t btif_storage_add_hid_device_info(bt_bdaddr_t *remote_bd_addr,
+                                                    UINT16 attr_mask, UINT8 sub_class,
+                                                    UINT8 app_id, UINT16 vendor_id,
+                                                    UINT16 product_id, UINT16 version,
+                                                    UINT8 ctry_code, UINT16 dl_len, UINT8 *dsc_list)
+{
+    bdstr_t bdstr;
+    bd2str(remote_bd_addr, &bdstr);
+    btif_config_set_int("Remote", bdstr, "HidAttrMask", attr_mask);
+    btif_config_set_int("Remote", bdstr, "HidSubClass", sub_class);
+    btif_config_set_int("Remote", bdstr, "HidAppId", app_id);
+    btif_config_set_int("Remote", bdstr, "HidVendorId", vendor_id);
+    btif_config_set_int("Remote", bdstr, "HidProductId", product_id);
+    btif_config_set_int("Remote", bdstr, "HidVersion", version);
+    btif_config_set_int("Remote", bdstr, "HidCountryCode", ctry_code);
+    if(dl_len > 0)
+        btif_config_set("Remote", bdstr, "HidDescriptor", (const char*)dsc_list, dl_len, BTIF_CFG_TYPE_BIN);
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_load_bonded_hid_info
+**
+** Description      BTIF storage API - Loads hid info for all the bonded devices from NVRAM
+**                  and adds those devices  to the BTA_HH.
+**
+** Returns          BT_STATUS_SUCCESS if successful, BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_load_bonded_hid_info(void)
+{
+    debug("in");
+    bt_bdaddr_t bd_addr;
+    tBTA_HH_DEV_DSCP_INFO dscp_info;
+    uint32_t i;
+    uint16_t attr_mask;
+    uint8_t  sub_class;
+    uint8_t  app_id;
+
+    char kname[128], vname[128];
+    short kpos;
+    int kname_size;
+    kname_size = sizeof(kname);
+    kname[0] = 0;
+    kpos = 0;
+    memset(&dscp_info, 0, sizeof(dscp_info));
+    do
+    {
+        kpos = btif_config_next_key(kpos, "Remote", kname, &kname_size);
+        debug("Remote device:%s, size:%d", kname, kname_size);
+        int value;
+        if(btif_config_get_int("Remote", kname, "HidAttrMask", &value))
+        {
+            attr_mask = (uint16_t)value;
+
+            btif_config_get_int("Remote", kname, "HidSubClass", &value);
+            sub_class = (uint8_t)value;
+
+            btif_config_get_int("Remote", kname, "HidAppId", &value);
+            app_id = (uint8_t)value;
+
+            btif_config_get_int("Remote", kname, "HidVendorId", &value);
+            dscp_info.vendor_id = (uint16_t) value;
+
+            btif_config_get_int("Remote", kname, "HidProductId", &value);
+            dscp_info.product_id = (uint16_t) value;
+
+            btif_config_get_int("Remote", kname, "HidVersion", &value);
+            dscp_info.version = (uint8_t) value;
+
+            btif_config_get_int("Remote", kname, "HidCountryCode", &value);
+            dscp_info.ctry_code = (uint8_t) value;
+
+            int len = 0;
+            int type;
+            btif_config_get("Remote", kname, "HidDescriptor", NULL, &len, &type);
+            if(len > 0)
+            {
+                dscp_info.descriptor.dl_len = (uint16_t)len;
+                dscp_info.descriptor.dsc_list = (uint8_t*)alloca(len);
+                btif_config_get("Remote", kname, "HidDescriptor", (char*)dscp_info.descriptor.dsc_list, &len, &type);
+            }
+            str2bd(kname, &bd_addr);
+            // add extracted information to BTA HH
+            if (btif_hh_add_added_dev(bd_addr,attr_mask))
+            {
+                BTA_HhAddDev(bd_addr.address, attr_mask, sub_class,
+                        app_id, dscp_info);
+            }
+        }
+    } while(kpos != -1);
+
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_remove_hid_info
+**
+** Description      BTIF storage API - Deletes the bonded hid device info from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the deletion was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_remove_hid_info(bt_bdaddr_t *remote_bd_addr)
+{
+    char *fname;
+    int ret;
+    bdstr_t bdstr;
+    bd2str(remote_bd_addr, &bdstr);
+
+    btif_config_remove("Remote", bdstr, "HidAttrMask");
+    btif_config_remove("Remote", bdstr, "HidSubClass");
+    btif_config_remove("Remote", bdstr, "HidAppId");
+    btif_config_remove("Remote", bdstr, "HidVendorId");
+    btif_config_remove("Remote", bdstr, "HidProductId");
+    btif_config_remove("Remote", bdstr, "HidVersion");
+    btif_config_remove("Remote", bdstr, "HidCountryCode");
+    btif_config_remove("Remote", bdstr, "HidDescriptor");
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_apps_cb
+**
+** Description      BTIF storage API - Read HL application control block from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_apps_cb(char *value, int value_size)
+{
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+    int read_size=value_size, read_type=BTIF_CFG_TYPE_BIN;
+
+    if (!btif_config_exist("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB))
+    {
+        memset(value, value_size, 0);
+        if (!btif_config_set("Local", BTIF_STORAGE_HL_APP,BTIF_STORAGE_HL_APP_CB,
+                             value, value_size, BTIF_CFG_TYPE_BIN))
+        {
+            bt_status = BT_STATUS_FAIL;
+        }
+        else
+        {
+            btif_config_save();
+        }
+    }
+    else
+    {
+        if (!btif_config_get("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB,
+                             value, &read_size, &read_type))
+        {
+            bt_status = BT_STATUS_FAIL;
+        }
+        else
+        {
+            if ((read_size != value_size) || (read_type != BTIF_CFG_TYPE_BIN) )
+            {
+                BTIF_TRACE_ERROR4("%s  value_size=%d read_size=%d read_type=%d",
+                                  __FUNCTION__, value_size, read_size, read_type);
+                bt_status = BT_STATUS_FAIL;
+            }
+        }
+
+    }
+
+    BTIF_TRACE_DEBUG3("%s  status=%d value_size=%d", __FUNCTION__, bt_status, value_size);
+    return bt_status;
+}
+
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_apps_cb
+**
+** Description      BTIF storage API - Write HL application control block to NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_apps_cb(char *value, int value_size)
+{
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+
+    if (!btif_config_set("Local", BTIF_STORAGE_HL_APP, BTIF_STORAGE_HL_APP_CB,
+                         value, value_size, BTIF_CFG_TYPE_BIN))
+    {
+        bt_status = BT_STATUS_FAIL;
+    }
+    else
+    {
+        btif_config_save();
+    }
+    BTIF_TRACE_DEBUG3("%s  status=%d value_size=%d", __FUNCTION__, bt_status, value_size);
+
+    return bt_status;
+}
+
+bt_status_t btif_storage_read_hl_data(char *fname, char *value, int value_size)
+{
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+    int read_size=value_size, read_type=BTIF_CFG_TYPE_BIN;
+
+    if (!btif_config_get("Local", BTIF_STORAGE_HL_APP, fname, value, &read_size, &read_type))
+    {
+        bt_status = BT_STATUS_FAIL;
+    }
+    else
+    {
+        if ((read_size != value_size) || (read_type != BTIF_CFG_TYPE_BIN) )
+        {
+            BTIF_TRACE_ERROR4("%s  value_size=%d read_size=%d read_type=%d",
+                              __FUNCTION__, value_size, read_size, read_type);
+            bt_status = BT_STATUS_FAIL;
+        }
+    }
+
+    return bt_status;
+}
+
+bt_status_t btif_storage_write_hl_data(char *fname, char *value, int value_size)
+{
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+
+    if (!btif_config_set("Local", BTIF_STORAGE_HL_APP, fname, value, value_size, BTIF_CFG_TYPE_BIN))
+    {
+        bt_status = BT_STATUS_FAIL;
+    }
+    else
+    {
+         btif_config_save();
+    }
+    BTIF_TRACE_DEBUG3("%s  status=%d value_size=%d", __FUNCTION__, bt_status, value_size);
+
+    return bt_status;
+
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_app_data
+**
+** Description      BTIF storage API - Read HL application configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_app_data(UINT8 app_idx, char *value, int value_size)
+{
+    char  fname[256];
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+
+    BTIF_TRACE_DEBUG1("%s ", __FUNCTION__);
+    sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_DATA, app_idx);
+    bt_status = btif_storage_read_hl_data(fname,  value, value_size);
+    BTIF_TRACE_DEBUG3("%s read item:(%s) bt_status=%d", __FUNCTION__, fname,   bt_status);
+
+    return bt_status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_app_data
+**
+** Description      BTIF storage API - Write HL application MDL configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_app_data(UINT8 app_idx, char *value, int value_size)
+{
+    char  fname[256];
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+
+
+    BTIF_TRACE_DEBUG1("%s ", __FUNCTION__);
+    sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_DATA, app_idx);
+    bt_status = btif_storage_write_hl_data(fname,  value, value_size);
+    BTIF_TRACE_DEBUG3("%s write item:(%s) bt_status=%d", __FUNCTION__, fname,   bt_status);
+
+    return bt_status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_read_hl_mdl_data
+**
+** Description      BTIF storage API - Read HL application MDL configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_read_hl_mdl_data(UINT8 app_idx, char *value, int value_size)
+{
+    char  fname[256],  tmp[3];
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+    int   status, i, buf_size;
+    char *p_buf;
+
+    BTIF_TRACE_DEBUG1("%s ", __FUNCTION__);
+    sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_MDL_DATA, app_idx);
+    bt_status = btif_storage_read_hl_data(fname,  value, value_size);
+    BTIF_TRACE_DEBUG3("%s read item:(%s) bt_status=%d", __FUNCTION__, fname,   bt_status);
+
+    return bt_status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_write_hl_mdl_data
+**
+** Description      BTIF storage API - Write HL application MDL configuration from NVRAM
+**
+** Returns          BT_STATUS_SUCCESS if the operation was successful,
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_write_hl_mdl_data(UINT8 app_idx, char *value, int value_size)
+{
+    char  fname[256];
+    bt_status_t bt_status = BT_STATUS_SUCCESS;
+    int   status, i, buf_size;
+    char *p_buf;
+
+    BTIF_TRACE_DEBUG1("%s ", __FUNCTION__);
+    sprintf(fname, "%s%d", BTIF_STORAGE_HL_APP_MDL_DATA, app_idx);
+    bt_status = btif_storage_write_hl_data(fname,  value, value_size);
+    BTIF_TRACE_DEBUG3("%s write item:(%s) bt_status=%d", __FUNCTION__, fname,   bt_status);
+
+    return bt_status;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_load_autopair_device_list
+**
+** Description      BTIF storage API - Populates auto pair device list
+**
+** Returns          BT_STATUS_SUCCESS if the auto pair blacklist is successfully populated
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+
+bt_status_t btif_storage_load_autopair_device_list()
+{
+    char *key_name, *key_value;
+    int i=0;
+    char linebuf[BTIF_STORAGE_MAX_LINE_SZ];
+    char *line;
+    FILE *fp;
+
+    if(!btif_config_exist("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, NULL))
+    {
+        /* first time loading of auto pair blacklist configuration  */
+
+        fp = fopen (BTIF_AUTO_PAIR_CONF_FILE, "r");
+
+        if (fp == NULL)
+        {
+            ALOGE("%s: Failed to open auto pair blacklist conf file at %s", __FUNCTION__,BTIF_AUTO_PAIR_CONF_FILE );
+            return BT_STATUS_FAIL;
+        }
+
+        /* read through auto_pairing.conf file and create the key value pairs specific to  auto pair blacklist devices */
+        while (fgets(linebuf, BTIF_STORAGE_MAX_LINE_SZ, fp) != NULL)
+        {
+            /* trip  leading white spaces */
+            while (linebuf[i] == BTIF_AUTO_PAIR_CONF_SPACE)
+                i++;
+
+            /* skip  commented lines */
+            if (linebuf[i] == BTIF_AUTO_PAIR_CONF_COMMENT)
+                continue;
+
+            line = (char*)&(linebuf[i]);
+
+            if (line == NULL)
+                continue;
+
+            key_name = strtok(line, BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER);
+
+            if (key_name == NULL)
+                continue;
+            else if((strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR) == 0) ||
+                    (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME) ==0) ||
+                    (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST) ==0 ) ||
+                    (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME) == 0) ||
+                    (strcmp(key_name, BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR) == 0))
+            {
+                key_value = strtok(NULL, BTIF_AUTO_PAIR_CONF_KEY_VAL_DELIMETER);
+                btif_config_set_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST, key_name, key_value);
+            }
+        }
+        fclose(fp);
+    }
+    return BT_STATUS_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_is_device_autopair_blacklisted
+**
+** Description      BTIF storage API  Checks if the given device is blacklisted for auto pairing
+**
+** Returns          TRUE if the device is found in the auto pair blacklist
+**                  FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN  btif_storage_is_device_autopair_blacklisted(bt_bdaddr_t *remote_dev_addr)
+{
+    char *token;
+    int ret;
+    bdstr_t bdstr;
+    char *dev_name_str;
+    uint8_t i = 0;
+    char value[BTIF_STORAGE_MAX_LINE_SZ];
+    int value_size = sizeof(value);
+
+    bd2str(remote_dev_addr, &bdstr);
+
+    /* Consider only  Lower Address Part from BD Address */
+    bdstr[8] = '\0';
+
+    if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_ADDR, value, &value_size))
+    {
+        if (strcasestr(value,bdstr) != NULL)
+            return TRUE;
+    }
+
+    dev_name_str = BTM_SecReadDevName((remote_dev_addr->address));
+
+    if (dev_name_str != NULL)
+    {
+        value_size = sizeof(value);
+        if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                    BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_EXACTNAME, value, &value_size))
+        {
+            if (strstr(value,dev_name_str) != NULL)
+                return TRUE;
+        }
+        value_size = sizeof(value);
+        if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                    BTIF_STORAGE_KEY_AUTOPAIR_BLACKLIST_PARTIALNAME, value, &value_size))
+        {
+            token = strtok(value, BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR);
+            while (token != NULL)
+            {
+                if (strstr(dev_name_str, token) != NULL)
+                    return TRUE;
+
+                token = strtok(NULL, BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR);
+            }
+        }
+    }
+    if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, value, &value_size))
+    {
+        if (strstr(value,bdstr) != NULL)
+            return TRUE;
+    }
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_add_device_to_autopair_blacklist
+**
+** Description      BTIF storage API - Add a remote device to the auto pairing blacklist
+**
+** Returns          BT_STATUS_SUCCESS if the device is successfully added to the auto pair blacklist
+**                  BT_STATUS_FAIL otherwise
+**
+*******************************************************************************/
+bt_status_t btif_storage_add_device_to_autopair_blacklist(bt_bdaddr_t *remote_dev_addr)
+{
+    int ret;
+    bdstr_t bdstr;
+    char linebuf[BTIF_STORAGE_MAX_LINE_SZ+20];
+    char input_value [20];
+
+    bd2str(remote_dev_addr, &bdstr);
+    strncpy(input_value, (char*)bdstr, 20);
+    strncat(input_value,BTIF_AUTO_PAIR_CONF_VALUE_SEPARATOR, 20);
+    int line_size = sizeof(linebuf);
+    if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                            BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, linebuf, &line_size))
+    {
+         /* Append this address to the dynamic List of BD address  */
+        strncat (linebuf, input_value, BTIF_STORAGE_MAX_LINE_SZ);
+    }
+    else
+    {
+        strncpy( linebuf,input_value, BTIF_STORAGE_MAX_LINE_SZ);
+    }
+
+    /* Write back the key value */
+    ret = btif_config_set_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                        BTIF_STORAGE_KEY_AUTOPAIR_DYNAMIC_BLACKLIST_ADDR, linebuf);
+
+    return ret ? BT_STATUS_SUCCESS:BT_STATUS_FAIL;
+}
+
+/*******************************************************************************
+**
+** Function         btif_storage_is_fixed_pin_zeros_keyboard
+**
+** Description      BTIF storage API - checks if this device has fixed PIN key device list
+**
+** Returns          TRUE   if the device is found in the fixed pin keyboard device list
+**                  FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN btif_storage_is_fixed_pin_zeros_keyboard(bt_bdaddr_t *remote_dev_addr)
+{
+    int ret;
+    bdstr_t bdstr;
+    char *dev_name_str;
+    uint8_t i = 0;
+    char linebuf[BTIF_STORAGE_MAX_LINE_SZ];
+
+    bd2str(remote_dev_addr, &bdstr);
+
+	/*consider on LAP part of BDA string*/
+	bdstr[8] = '\0';
+
+    int line_size = sizeof(linebuf);
+    if(btif_config_get_str("Local", BTIF_STORAGE_PATH_AUTOPAIR_BLACKLIST,
+                            BTIF_STORAGE_KEY_AUTOPAIR_FIXPIN_KBLIST, linebuf, &line_size))
+    {
+        if (strcasestr(linebuf,bdstr) != NULL)
+            return TRUE;
+    }
+    return FALSE;
+
+}
diff --git a/btif/src/btif_util.c b/btif/src/btif_util.c
new file mode 100644
index 0000000..5539c11
--- /dev/null
+++ b/btif/src/btif_util.c
@@ -0,0 +1,462 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_util.c
+ *
+ *  Description:   Miscellaneous helper functions
+ *
+ *
+ ***********************************************************************************/
+
+#include <hardware/bluetooth.h>
+#include <hardware/bt_hf.h>
+#include <hardware/bt_av.h>
+#include <netinet/in.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <ctype.h>
+
+
+#define LOG_TAG "BTIF_UTIL"
+#include "btif_common.h"
+#include "bta_api.h"
+#include "gki.h"
+#include "btu.h"
+#include "bte.h"
+#include "bd.h"
+#include "btif_dm.h"
+#include "btif_util.h"
+#include "bta_ag_api.h"
+#include "bta_hh_api.h"
+
+
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+#define ISDIGIT(a)  ((a>='0') && (a<='9'))
+#define ISXDIGIT(a) (((a>='0') && (a<='9'))||((a>='A') && (a<='F'))||((a>='a') && (a<='f')))
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+/*****************************************************************************
+**   Logging helper functions
+*****************************************************************************/
+
+int str2bd(char *str, bt_bdaddr_t *addr)
+{
+    int32_t i = 0;
+    for (i = 0; i < 6; i++) {
+       addr->address[i] = (uint8_t) strtoul(str, (char **)&str, 16);
+       str++;
+    }
+    return 0;
+}
+
+char *bd2str(bt_bdaddr_t *bdaddr, bdstr_t *bdstr)
+{
+    char *addr = (char *) bdaddr->address;
+
+    sprintf((char*)bdstr, "%02x:%02x:%02x:%02x:%02x:%02x",
+                       (int)addr[0],(int)addr[1],(int)addr[2],
+                       (int)addr[3],(int)addr[4],(int)addr[5]);
+    return (char *)bdstr;
+}
+
+UINT32 devclass2uint(DEV_CLASS dev_class)
+{
+    UINT32 cod = 0;
+
+    /* if COD is 0, irrespective of the device type set it to Unclassified device */
+    cod = (dev_class[2]) | (dev_class[1] << 8) | (dev_class[0] << 16);
+
+    return cod;
+}
+void uint2devclass(UINT32 cod, DEV_CLASS dev_class)
+{
+    dev_class[2] = (UINT8)cod;
+    dev_class[1] = (UINT8)(cod >> 8);
+    dev_class[0] = (UINT8)(cod >> 16);
+}
+
+static const UINT8  sdp_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00,
+                                       0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB};
+
+void uuid16_to_uuid128(uint16_t uuid16, bt_uuid_t* uuid128)
+{
+    uint16_t uuid16_bo;
+    memset(uuid128, 0, sizeof(bt_uuid_t));
+
+    memcpy(uuid128->uu, sdp_base_uuid, MAX_UUID_SIZE);
+    uuid16_bo = ntohs(uuid16);
+    memcpy(uuid128->uu + 2, &uuid16_bo, sizeof(uint16_t));
+}
+
+void string_to_uuid(char *str, bt_uuid_t *p_uuid)
+{
+    uint32_t uuid0, uuid4;
+    uint16_t uuid1, uuid2, uuid3, uuid5;
+
+    sscanf(str, "%08x-%04hx-%04hx-%04hx-%08x%04hx",
+                &uuid0, &uuid1, &uuid2, &uuid3, &uuid4, &uuid5);
+
+    uuid0 = htonl(uuid0);
+    uuid1 = htons(uuid1);
+    uuid2 = htons(uuid2);
+    uuid3 = htons(uuid3);
+    uuid4 = htonl(uuid4);
+    uuid5 = htons(uuid5);
+
+    memcpy(&(p_uuid->uu[0]), &uuid0, 4);
+    memcpy(&(p_uuid->uu[4]), &uuid1, 2);
+    memcpy(&(p_uuid->uu[6]), &uuid2, 2);
+    memcpy(&(p_uuid->uu[8]), &uuid3, 2);
+    memcpy(&(p_uuid->uu[10]), &uuid4, 4);
+    memcpy(&(p_uuid->uu[14]), &uuid5, 2);
+
+    return;
+
+}
+
+void uuid_to_string(bt_uuid_t *p_uuid, char *str)
+{
+    uint32_t uuid0, uuid4;
+    uint16_t uuid1, uuid2, uuid3, uuid5;
+
+    memcpy(&uuid0, &(p_uuid->uu[0]), 4);
+    memcpy(&uuid1, &(p_uuid->uu[4]), 2);
+    memcpy(&uuid2, &(p_uuid->uu[6]), 2);
+    memcpy(&uuid3, &(p_uuid->uu[8]), 2);
+    memcpy(&uuid4, &(p_uuid->uu[10]), 4);
+    memcpy(&uuid5, &(p_uuid->uu[14]), 2);
+
+    sprintf((char *)str, "%.8x-%.4x-%.4x-%.4x-%.8x%.4x",
+            ntohl(uuid0), ntohs(uuid1),
+            ntohs(uuid2), ntohs(uuid3),
+            ntohl(uuid4), ntohs(uuid5));
+    return;
+}
+
+/*****************************************************************************
+**  Function        ascii_2_hex
+**
+**  Description     This function converts an ASCII string into HEX
+**
+**  Returns         the number of hex bytes filled.
+*/
+int ascii_2_hex (char *p_ascii, int len, UINT8 *p_hex)
+{
+    int     x;
+    UINT8   c;
+
+    for (x = 0; (x < len) && (*p_ascii); x++)
+    {
+        if (ISDIGIT (*p_ascii))
+            c = (*p_ascii - '0') << 4;
+        else
+            c = (toupper(*p_ascii) - 'A' + 10) << 4;
+
+        p_ascii++;
+        if (*p_ascii)
+        {
+            if (ISDIGIT (*p_ascii))
+                c |= (*p_ascii - '0');
+            else
+                c |= (toupper(*p_ascii) - 'A' + 10);
+
+            p_ascii++;
+        }
+        *p_hex++ = c;
+    }
+
+    return (x);
+}
+
+
+const char* dump_dm_search_event(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTA_DM_INQ_RES_EVT)
+        CASE_RETURN_STR(BTA_DM_INQ_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_DISC_RES_EVT)
+        CASE_RETURN_STR(BTA_DM_DISC_BLE_RES_EVT)
+        CASE_RETURN_STR(BTA_DM_DISC_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_DI_DISC_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_SEARCH_CANCEL_CMPL_EVT)
+
+        default:
+            return "UNKNOWN MSG ID";
+     }
+}
+
+
+const char* dump_property_type(bt_property_type_t type)
+{
+    switch(type)
+    {
+        CASE_RETURN_STR(BT_PROPERTY_BDNAME)
+        CASE_RETURN_STR(BT_PROPERTY_BDADDR)
+        CASE_RETURN_STR(BT_PROPERTY_UUIDS)
+        CASE_RETURN_STR(BT_PROPERTY_CLASS_OF_DEVICE)
+        CASE_RETURN_STR(BT_PROPERTY_TYPE_OF_DEVICE)
+        CASE_RETURN_STR(BT_PROPERTY_REMOTE_RSSI)
+        CASE_RETURN_STR(BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT)
+        CASE_RETURN_STR(BT_PROPERTY_ADAPTER_BONDED_DEVICES)
+        CASE_RETURN_STR(BT_PROPERTY_ADAPTER_SCAN_MODE)
+        CASE_RETURN_STR(BT_PROPERTY_REMOTE_FRIENDLY_NAME)
+
+        default:
+            return "UNKNOWN PROPERTY ID";
+    }
+}
+
+const char* dump_dm_event(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTA_DM_ENABLE_EVT)
+        CASE_RETURN_STR(BTA_DM_DISABLE_EVT)
+        CASE_RETURN_STR(BTA_DM_PIN_REQ_EVT)
+        CASE_RETURN_STR(BTA_DM_AUTH_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_AUTHORIZE_EVT)
+        CASE_RETURN_STR(BTA_DM_LINK_UP_EVT)
+        CASE_RETURN_STR(BTA_DM_LINK_DOWN_EVT)
+        CASE_RETURN_STR(BTA_DM_SIG_STRENGTH_EVT)
+        CASE_RETURN_STR(BTA_DM_BUSY_LEVEL_EVT)
+        CASE_RETURN_STR(BTA_DM_BOND_CANCEL_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_SP_CFM_REQ_EVT)
+        CASE_RETURN_STR(BTA_DM_SP_KEY_NOTIF_EVT)
+        CASE_RETURN_STR(BTA_DM_SP_RMT_OOB_EVT)
+        CASE_RETURN_STR(BTA_DM_SP_KEYPRESS_EVT)
+        CASE_RETURN_STR(BTA_DM_ROLE_CHG_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_KEY_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_SEC_REQ_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_PASSKEY_NOTIF_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_PASSKEY_REQ_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_OOB_REQ_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_LOCAL_IR_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_LOCAL_ER_EVT)
+        CASE_RETURN_STR(BTA_DM_BLE_AUTH_CMPL_EVT)
+        CASE_RETURN_STR(BTA_DM_DEV_UNPAIRED_EVT)
+        CASE_RETURN_STR(BTA_DM_HW_ERROR_EVT)
+
+        default:
+            return "UNKNOWN DM EVENT";
+    }
+}
+
+const char* dump_hf_event(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTA_AG_ENABLE_EVT)
+        CASE_RETURN_STR(BTA_AG_REGISTER_EVT)
+        CASE_RETURN_STR(BTA_AG_OPEN_EVT)
+        CASE_RETURN_STR(BTA_AG_CLOSE_EVT)
+        CASE_RETURN_STR(BTA_AG_CONN_EVT)
+        CASE_RETURN_STR(BTA_AG_AUDIO_OPEN_EVT)
+        CASE_RETURN_STR(BTA_AG_AUDIO_CLOSE_EVT)
+        CASE_RETURN_STR(BTA_AG_SPK_EVT)
+        CASE_RETURN_STR(BTA_AG_MIC_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CKPD_EVT)
+        CASE_RETURN_STR(BTA_AG_DISABLE_EVT)
+
+        CASE_RETURN_STR(BTA_AG_AT_A_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_D_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CHLD_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CHUP_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CIND_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_VTS_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BINP_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BLDN_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BVRA_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_NREC_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CNUM_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BTRH_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CLCC_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_COPS_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_UNAT_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_CBC_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BAC_EVT)
+        CASE_RETURN_STR(BTA_AG_AT_BCS_EVT)
+
+        default:
+            return "UNKNOWN MSG ID";
+     }
+}
+
+const char* dump_hh_event(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTA_HH_ENABLE_EVT)
+        CASE_RETURN_STR(BTA_HH_DISABLE_EVT)
+        CASE_RETURN_STR(BTA_HH_OPEN_EVT)
+        CASE_RETURN_STR(BTA_HH_CLOSE_EVT)
+        CASE_RETURN_STR(BTA_HH_GET_DSCP_EVT)
+        CASE_RETURN_STR(BTA_HH_GET_PROTO_EVT)
+        CASE_RETURN_STR(BTA_HH_GET_RPT_EVT)
+        CASE_RETURN_STR(BTA_HH_GET_IDLE_EVT)
+        CASE_RETURN_STR(BTA_HH_SET_PROTO_EVT)
+        CASE_RETURN_STR(BTA_HH_SET_RPT_EVT)
+        CASE_RETURN_STR(BTA_HH_SET_IDLE_EVT)
+        CASE_RETURN_STR(BTA_HH_VC_UNPLUG_EVT)
+        CASE_RETURN_STR(BTA_HH_ADD_DEV_EVT)
+        CASE_RETURN_STR(BTA_HH_RMV_DEV_EVT)
+        CASE_RETURN_STR(BTA_HH_API_ERR_EVT)
+        default:
+            return "UNKNOWN MSG ID";
+     }
+}
+
+
+const char* dump_hf_conn_state(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTHF_CONNECTION_STATE_DISCONNECTED)
+        CASE_RETURN_STR(BTHF_CONNECTION_STATE_CONNECTING)
+        CASE_RETURN_STR(BTHF_CONNECTION_STATE_CONNECTED)
+        CASE_RETURN_STR(BTHF_CONNECTION_STATE_SLC_CONNECTED)
+        CASE_RETURN_STR(BTHF_CONNECTION_STATE_DISCONNECTING)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+const char* dump_hf_call_state(bthf_call_state_t call_state)
+{
+    switch(call_state)
+    {
+        CASE_RETURN_STR(BTHF_CALL_STATE_IDLE)
+        CASE_RETURN_STR(BTHF_CALL_STATE_HELD)
+        CASE_RETURN_STR(BTHF_CALL_STATE_DIALING)
+        CASE_RETURN_STR(BTHF_CALL_STATE_ALERTING)
+        CASE_RETURN_STR(BTHF_CALL_STATE_INCOMING)
+        CASE_RETURN_STR(BTHF_CALL_STATE_WAITING)
+        CASE_RETURN_STR(BTHF_CALL_STATE_ACTIVE)
+        default:
+            return "UNKNOWN CALL STATE";
+    }
+}
+
+const char* dump_thread_evt(bt_cb_thread_evt evt)
+{
+    switch(evt)
+    {
+        CASE_RETURN_STR(ASSOCIATE_JVM)
+        CASE_RETURN_STR(DISASSOCIATE_JVM)
+
+        default:
+            return "unknown thread evt";
+    }
+}
+
+
+const char* dump_hf_audio_state(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTHF_AUDIO_STATE_DISCONNECTED)
+        CASE_RETURN_STR(BTHF_AUDIO_STATE_CONNECTING)
+        CASE_RETURN_STR(BTHF_AUDIO_STATE_CONNECTED)
+        CASE_RETURN_STR(BTHF_AUDIO_STATE_DISCONNECTING)
+        default:
+           return "UNKNOWN MSG ID";
+
+    }
+}
+
+const char* dump_av_conn_state(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTAV_CONNECTION_STATE_DISCONNECTED)
+        CASE_RETURN_STR(BTAV_CONNECTION_STATE_CONNECTING)
+        CASE_RETURN_STR(BTAV_CONNECTION_STATE_CONNECTED)
+        CASE_RETURN_STR(BTAV_CONNECTION_STATE_DISCONNECTING)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+const char* dump_av_audio_state(UINT16 event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(BTAV_AUDIO_STATE_REMOTE_SUSPEND)
+        CASE_RETURN_STR(BTAV_AUDIO_STATE_STOPPED)
+        CASE_RETURN_STR(BTAV_AUDIO_STATE_STARTED)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+const char* dump_adapter_scan_mode(bt_scan_mode_t mode)
+{
+    switch(mode)
+    {
+        CASE_RETURN_STR(BT_SCAN_MODE_NONE)
+        CASE_RETURN_STR(BT_SCAN_MODE_CONNECTABLE)
+        CASE_RETURN_STR(BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE)
+
+        default:
+            return "unknown scan mode";
+    }
+}
+
+const char* dump_bt_status(bt_status_t status)
+{
+    switch(status)
+    {
+        CASE_RETURN_STR(BT_STATUS_SUCCESS)
+        CASE_RETURN_STR(BT_STATUS_FAIL)
+        CASE_RETURN_STR(BT_STATUS_NOT_READY)
+        CASE_RETURN_STR(BT_STATUS_NOMEM)
+        CASE_RETURN_STR(BT_STATUS_BUSY)
+        CASE_RETURN_STR(BT_STATUS_UNSUPPORTED)
+
+        default:
+            return "unknown scan mode";
+    }
+}
+
+
+
diff --git a/conf/Android.mk b/conf/Android.mk
new file mode 100644
index 0000000..22d03d7
--- /dev/null
+++ b/conf/Android.mk
@@ -0,0 +1,28 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := bt_stack.conf
+LOCAL_MODULE_CLASS := ETC
+LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth
+LOCAL_MODULE_TAGS := optional
+LOCAL_SRC_FILES := $(LOCAL_MODULE)
+include $(BUILD_PREBUILT)
+
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := bt_did.conf
+LOCAL_MODULE_CLASS := ETC
+LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth
+LOCAL_MODULE_TAGS := optional
+LOCAL_SRC_FILES := $(LOCAL_MODULE)
+include $(BUILD_PREBUILT)
+
+
+include $(CLEAR_VARS)
+LOCAL_MODULE := auto_pair_devlist.conf
+LOCAL_MODULE_CLASS := ETC
+LOCAL_MODULE_PATH := $(TARGET_OUT)/etc/bluetooth
+LOCAL_MODULE_TAGS := optional
+LOCAL_SRC_FILES :=  $(LOCAL_MODULE)
+include $(BUILD_PREBUILT)
+
diff --git a/conf/auto_pair_devlist.conf b/conf/auto_pair_devlist.conf
new file mode 100644
index 0000000..1e25592
--- /dev/null
+++ b/conf/auto_pair_devlist.conf
@@ -0,0 +1,27 @@
+# Do NOT change this file format without updating the parsing logic in
+# BT IF module implementation (btif_storage.c)
+
+# This file contains information to prevent auto pairing with Bluetooth devices.
+# Blacklisting by vendor prefix address:
+# The following companies are included in the list below:
+# ALPS (lexus), Murata (Prius 2007, Nokia 616), TEMIC SDS (Porsche, Audi),
+# Parrot, Zhongshan General K-mate Electronics, Great Well
+# Electronics, Flaircomm Electronics, Jatty Electronics, Delphi,
+# Clarion, Novero, Denso (Lexus, Toyota), Johnson Controls (Acura),
+# Continental Automotive, Harman/Becker, Panasonic/Kyushu Ten,
+# BMW (Motorola PCS), Visteon, Peugeot, BMW (MINI10013)
+AddressBlacklist=00:02:C7,00:16:FE,00:19:C1,00:1B:FB,00:1E:3D,00:21:4F,00:23:06,00:24:33,00:A0:79,00:0E:6D,00:13:E0,00:21:E8,00:60:57,00:0E:9F,00:12:1C,00:18:91,00:18:96,00:13:04,00:16:FD,00:22:A0,00:0B:4C,00:60:6F,00:23:3D,00:C0:59,00:0A:30,00:1E:AE,00:1C:D7,00:80:F0,00:12:8A,00:09:93,00:80:37,00:26:7E
+
+# Blacklisting by Exact Name:
+ExactNameBlacklist=Motorola IHF1000,i.TechBlueBAND,X5 Stereo v1.3,KML_CAN
+
+# Blacklisting by Partial Name (if name starts with)
+PartialNameBlacklist=BMW,Audi,Parrot,Car
+
+# Fixed PIN keyboard blacklist. Keyboards should have variable PIN
+# The keyboards below have a fixed PIN of 0000, so we will auto pair.
+# Note the reverse logic in this case compared to other's in this file
+# where its a blacklist for not auto pairing.
+FixedPinZerosKeyboardBlacklist=00:0F:F6
+
+# Blacklisting by addition of the address during usage
diff --git a/conf/bt_did.conf b/conf/bt_did.conf
new file mode 100644
index 0000000..b08a938
--- /dev/null
+++ b/conf/bt_did.conf
@@ -0,0 +1,94 @@
+# Device ID (DID) configuration
+[DID]
+
+# Record Number: 1, 2 or 3 - maximum of 3 records
+recordNumber = 1
+
+# Primary Record - true or false (default)
+# There can be only one primary record
+primaryRecord = true
+
+# Vendor ID '0xFFFF' indicates no Device ID Service Record is present in the device
+# 0x000F = Broadcom Corporation (default)
+#vendorId = 0x000F
+
+# Vendor ID Source
+# 0x0001 = Bluetooth SIG assigned Device ID Vendor ID value (default)
+# 0x0002 = USB Implementer’s Forum assigned Device ID Vendor ID value
+#vendorIdSource = 0x0001
+
+# Product ID & Product Version
+# Per spec DID v1.3 0xJJMN for version is interpreted as JJ.M.N
+# JJ: major version number, M: minor version number, N: sub-minor version number
+# For example: 1200, v14.3.6
+productId = 0x1200
+version = 0x1436
+
+# Optional attributes
+#clientExecutableURL =
+#serviceDescription =
+#documentationURL =
+
+#=================================================================================================#
+# Device ID (DID) configuration
+[DID]
+
+# Record number: 1, 2 or 3 - maximum of 3 records
+#recordNumber = 2
+
+# Primary Record - true or false (default)
+# There can be only one primary record
+#primaryRecord = false
+
+# Vendor ID '0xFFFF' indicates no Device ID Service Record is present in the device
+# 0x000F = Broadcom Corporation (default)
+#vendorId = 0x000F
+
+# Vendor ID Source
+# 0x0001 = Bluetooth SIG assigned Device ID Vendor ID value (default)
+# 0x0002 = USB Implementer’s Forum assigned Device ID Vendor ID value
+#vendorIdSource = 0x0001
+
+# Product ID & Product Version
+# Per spec DID v1.3 0xJJMN for version is interpreted as JJ.M.N
+# JJ: major version number, M: minor version number, N: sub-minor version number
+# Default: 0x0000, v00.0.0
+#productId = 0x0000
+#version = 0x0000
+
+# Optional attributes
+#clientExecutableURL =
+#serviceDescription =
+#documentationURL =
+
+#=================================================================================================#
+# Device ID (DID) configuration
+[DID]
+
+# Record number: 1, 2 or 3 - maximum of 3 records
+#recordNumber = 3
+
+# Primary Record - true or false (default)
+# There can be only one primary record
+#primaryRecord = false
+
+# Vendor ID '0xFFFF' indicates no Device ID Service Record is present in the device
+# 0x000F = Broadcom Corporation (default)
+#vendorId = 0x000F
+
+# Vendor ID Source
+# 0x0001 = Bluetooth SIG assigned Device ID Vendor ID value (default)
+# 0x0002 = USB Implementer’s Forum assigned Device ID Vendor ID value
+#vendorIdSource = 0x0001
+
+# Product ID & Product Version
+# Per spec DID v1.3 0xJJMN for version is interpreted as JJ.M.N
+# JJ: major version number, M: minor version number, N: sub-minor version number
+# Default: 0x0000, v00.0.0
+#productId = 0x0000
+#version = 0x0000
+
+# Optional attributes
+#clientExecutableURL =
+#serviceDescription =
+#documentationURL =
diff --git a/conf/bt_stack.conf b/conf/bt_stack.conf
new file mode 100644
index 0000000..a956c14
--- /dev/null
+++ b/conf/bt_stack.conf
@@ -0,0 +1,33 @@
+# Enable BtSnoop logging function
+# valid value : true, false
+BtSnoopLogOutput=false
+
+# BtSnoop log output file
+BtSnoopFileName=/sdcard/btsnoop_hci.log
+
+# Enable trace level reconfiguration function
+# Must be present before any TRC_ trace level settings
+TraceConf=true
+
+# Trace level configuration
+#   BT_TRACE_LEVEL_NONE    0    ( No trace messages to be generated )
+#   BT_TRACE_LEVEL_ERROR   1    ( Error condition trace messages )
+#   BT_TRACE_LEVEL_WARNING 2    ( Warning condition trace messages )
+#   BT_TRACE_LEVEL_API     3    ( API traces )
+#   BT_TRACE_LEVEL_EVENT   4    ( Debug messages for events )
+#   BT_TRACE_LEVEL_DEBUG   5    ( Full debug messages )
+TRC_BTM=2
+TRC_HCI=2
+TRC_L2CAP=2
+TRC_RFCOMM=2
+TRC_OBEX=2
+TRC_AVCT=2
+TRC_AVDT=2
+TRC_AVRC=2
+TRC_AVDT_SCB=2
+TRC_AVDT_CCB=2
+TRC_A2D=2
+TRC_SDP=2
+TRC_GATT=2
+TRC_SMP=2
+TRC_BTAPP=2
diff --git a/embdrv/sbc/encoder/include/sbc_dct.h b/embdrv/sbc/encoder/include/sbc_dct.h
new file mode 100644
index 0000000..245e65d
--- /dev/null
+++ b/embdrv/sbc/encoder/include/sbc_dct.h
@@ -0,0 +1,91 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Definitions for the fast DCT.
+ *
+ ******************************************************************************/
+
+#ifndef SBC_DCT_H
+#define SBC_DCT_H
+
+#if (SBC_ARM_ASM_OPT==TRUE)
+#define SBC_MULT_32_16_SIMPLIFIED(s16In2, s32In1, s32OutLow)					\
+{																			    \
+    __asm																		\
+{																				\
+    MUL s32OutLow,(SINT32)s16In2, (s32In1>>15)        \
+}																				\
+}
+#else
+#if (SBC_DSP_OPT==TRUE)
+#define SBC_MULT_32_16_SIMPLIFIED(s16In2, s32In1 , s32OutLow) s32OutLow = SBC_Multiply_32_16_Simplified((SINT32)s16In2,s32In1);
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+/*#define SBC_MULT_32_16_SIMPLIFIED(s16In2, s32In1 , s32OutLow) s32OutLow=(SINT32)((SINT32)(s16In2)*(SINT32)(s32In1>>15)); */
+#define SBC_MULT_32_16_SIMPLIFIED(s16In2, s32In1 , s32OutLow) s32OutLow=(SINT32)(((SINT64)s16In2*(SINT64)s32In1)>>15);
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+#define SBC_MULT_32_32(s32In2, s32In1, s32OutLow)                           \
+{                                                                           \
+    s64Temp = ((SINT64) s32In2) * ((SINT64) s32In1)>>31;            \
+    s32OutLow = (SINT32) s64Temp;                                                    \
+}
+#endif
+#else
+#define SBC_MULT_32_16_SIMPLIFIED(s16In2, s32In1 , s32OutLow)                   \
+{                                                                               \
+    s32In1Temp = s32In1;                                                        \
+    s32In2Temp = (SINT32)s16In2;                                                \
+                                                                                \
+    /* Multiply one +ve and the other -ve number */                             \
+    if (s32In1Temp < 0)                                                         \
+    {                                                                           \
+        s32In1Temp ^= 0xFFFFFFFF;                                               \
+        s32In1Temp++;                                                           \
+        s32OutLow  = (s32In2Temp * (s32In1Temp >> 16));                         \
+        s32OutLow += (( s32In2Temp * (s32In1Temp & 0xFFFF)) >> 16);             \
+        s32OutLow ^= 0xFFFFFFFF;                                                \
+        s32OutLow++;                                                            \
+    }                                                                           \
+    else                                                                        \
+    {                                                                           \
+        s32OutLow  = (s32In2Temp * (s32In1Temp >> 16));                         \
+        s32OutLow += (( s32In2Temp * (s32In1Temp & 0xFFFF)) >> 16);             \
+    }                                                                           \
+    s32OutLow <<= 1;                                                            \
+}
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+#define SBC_MULT_64(s32In1, s32In2, s32OutLow, s32OutHi)  \
+{\
+        s32OutLow=(SINT32)(((SINT64)s32In1*(SINT64)s32In2)& 0x00000000FFFFFFFF);\
+        s32OutHi=(SINT32)(((SINT64)s32In1*(SINT64)s32In2)>>32);\
+}
+#define SBC_MULT_32_32(s32In2, s32In1, s32OutLow)                           \
+{                                                                           \
+    s32HiTemp = 0;                                                          \
+    SBC_MULT_64(s32In2,s32In1 , s32OutLow, s32HiTemp);                      \
+    s32OutLow   = (((s32OutLow>>15)&0x1FFFF) | (s32HiTemp << 17));          \
+}
+#endif
+
+#endif
+#endif
+#endif
+
+#endif
diff --git a/embdrv/sbc/encoder/include/sbc_enc_func_declare.h b/embdrv/sbc/encoder/include/sbc_enc_func_declare.h
new file mode 100644
index 0000000..2ac34ff
--- /dev/null
+++ b/embdrv/sbc/encoder/include/sbc_enc_func_declare.h
@@ -0,0 +1,57 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Function declarations.
+ *
+ ******************************************************************************/
+
+#ifndef SBC_FUNCDECLARE_H
+#define SBC_FUNCDECLARE_H
+
+/*#include "sbc_encoder.h"*/
+/* Global data */
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == FALSE)
+extern const SINT16 gas32CoeffFor4SBs[];
+extern const SINT16 gas32CoeffFor8SBs[];
+#else
+extern const SINT32 gas32CoeffFor4SBs[];
+extern const SINT32 gas32CoeffFor8SBs[];
+#endif
+
+/* Global functions*/
+
+extern void sbc_enc_bit_alloc_mono(SBC_ENC_PARAMS *CodecParams);
+extern void sbc_enc_bit_alloc_ste(SBC_ENC_PARAMS *CodecParams);
+
+extern void SbcAnalysisInit (void);
+
+extern void SbcAnalysisFilter4(SBC_ENC_PARAMS *strEncParams);
+extern void SbcAnalysisFilter8(SBC_ENC_PARAMS *strEncParams);
+
+extern void SBC_FastIDCT8 (SINT32 *pInVect, SINT32 *pOutVect);
+extern void SBC_FastIDCT4 (SINT32 *x0, SINT32 *pOutVect);
+
+extern void EncPacking(SBC_ENC_PARAMS *strEncParams);
+extern void EncQuantizer(SBC_ENC_PARAMS *);
+#if (SBC_DSP_OPT==TRUE)
+    SINT32 SBC_Multiply_32_16_Simplified(SINT32 s32In2Temp,SINT32 s32In1Temp);
+#endif
+#endif
+
diff --git a/embdrv/sbc/encoder/include/sbc_encoder.h b/embdrv/sbc/encoder/include/sbc_encoder.h
new file mode 100644
index 0000000..78ed044
--- /dev/null
+++ b/embdrv/sbc/encoder/include/sbc_encoder.h
@@ -0,0 +1,202 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains constants and structures used by Encoder.
+ *
+ ******************************************************************************/
+
+#ifndef SBC_ENCODER_H
+#define SBC_ENCODER_H
+
+#define ENCODER_VERSION "0025"
+
+#ifdef BUILDCFG
+    #include "bt_target.h"
+#endif
+
+/*DEFINES*/
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef TRUE
+#define TRUE (!FALSE)
+#endif
+
+#define SBC_MAX_NUM_OF_SUBBANDS 8
+#define SBC_MAX_NUM_OF_CHANNELS 2
+#define SBC_MAX_NUM_OF_BLOCKS   16
+
+#define SBC_LOUDNESS    0
+#define SBC_SNR 1
+
+#define SUB_BANDS_8 8
+#define SUB_BANDS_4 4
+
+#define SBC_sf16000 0
+#define SBC_sf32000 1
+#define SBC_sf44100 2
+#define SBC_sf48000 3
+
+#define SBC_MONO    0
+#define SBC_DUAL    1
+#define SBC_STEREO  2
+#define SBC_JOINT_STEREO    3
+
+#define SBC_BLOCK_0 4
+#define SBC_BLOCK_1 8
+#define SBC_BLOCK_2 12
+#define SBC_BLOCK_3 16
+
+#define SBC_NULL    0
+
+#ifndef SBC_MAX_NUM_FRAME
+#define SBC_MAX_NUM_FRAME 1
+#endif
+
+#ifndef SBC_DSP_OPT
+#define SBC_DSP_OPT FALSE
+#endif
+
+/* Set SBC_USE_ARM_PRAGMA to TRUE to use "#pragma arm section zidata" */
+#ifndef SBC_USE_ARM_PRAGMA
+#define SBC_USE_ARM_PRAGMA FALSE
+#endif
+
+/* Set SBC_ARM_ASM_OPT to TRUE in case the target is an ARM */
+/* this will replace all the 32 and 64 bit mult by in line assembly code */
+#ifndef SBC_ARM_ASM_OPT
+#define SBC_ARM_ASM_OPT FALSE
+#endif
+
+/* green hill compiler option -> Used to distinguish the syntax for inline assembly code*/
+#ifndef SBC_GHS_COMPILER
+#define SBC_GHS_COMPILER FALSE
+#endif
+
+/* ARM compiler option -> Used to distinguish the syntax for inline assembly code */
+#ifndef SBC_ARM_COMPILER
+#define SBC_ARM_COMPILER TRUE
+#endif
+
+/* Set SBC_IPAQ_OPT to TRUE in case the target is an ARM */
+/* 32 and 64 bit mult will be performed using SINT64 ( usualy __int64 ) cast that usualy give optimal performance if supported */
+#ifndef SBC_IPAQ_OPT
+#define SBC_IPAQ_OPT TRUE
+#endif
+
+/* Debug only: set SBC_IS_64_MULT_IN_WINDOW_ACCU to TRUE to use 64 bit multiplication in the windowing */
+/* -> not recomended, more MIPS for the same restitution.  */
+#ifndef SBC_IS_64_MULT_IN_WINDOW_ACCU
+#define SBC_IS_64_MULT_IN_WINDOW_ACCU  FALSE
+#endif /*SBC_IS_64_MULT_IN_WINDOW_ACCU */
+
+/* Set SBC_IS_64_MULT_IN_IDCT to TRUE to use 64 bits multiplication in the DCT of Matrixing */
+/* -> more MIPS required for a better audio quality. comparasion with the SIG utilities shows a division by 10 of the RMS */
+/* CAUTION: It only apply in the if SBC_FAST_DCT is set to TRUE */
+#ifndef SBC_IS_64_MULT_IN_IDCT
+#define SBC_IS_64_MULT_IN_IDCT  FALSE
+#endif /*SBC_IS_64_MULT_IN_IDCT */
+
+/* set SBC_IS_64_MULT_IN_QUANTIZER to TRUE to use 64 bits multiplication in the quantizer */
+/* setting this flag to FALSE add whistling noise at 5.5 and 11 KHz usualy not perceptible by human's hears. */
+#ifndef SBC_IS_64_MULT_IN_QUANTIZER
+#define SBC_IS_64_MULT_IN_QUANTIZER  TRUE
+#endif /*SBC_IS_64_MULT_IN_IDCT */
+
+/* Debug only: set this flag to FALSE to disable fast DCT algorithm */
+#ifndef SBC_FAST_DCT
+#define SBC_FAST_DCT  TRUE
+#endif /*SBC_FAST_DCT */
+
+/* In case we do not use joint stereo mode the flag save some RAM and ROM in case it is set to FALSE */
+#ifndef SBC_JOINT_STE_INCLUDED
+#define SBC_JOINT_STE_INCLUDED TRUE
+#endif
+
+/* TRUE -> application should provide PCM buffer, FALSE PCM buffer reside in SBC_ENC_PARAMS */
+#ifndef SBC_NO_PCM_CPY_OPTION
+#define SBC_NO_PCM_CPY_OPTION FALSE
+#endif
+
+#define MINIMUM_ENC_VX_BUFFER_SIZE (8*10*2)
+#ifndef ENC_VX_BUFFER_SIZE
+#define ENC_VX_BUFFER_SIZE (MINIMUM_ENC_VX_BUFFER_SIZE + 64)
+/*#define ENC_VX_BUFFER_SIZE MINIMUM_ENC_VX_BUFFER_SIZE + 1024*/
+#endif
+
+#ifndef SBC_FOR_EMBEDDED_LINUX
+#define SBC_FOR_EMBEDDED_LINUX FALSE
+#endif
+
+/*constants used for index calculation*/
+#define SBC_BLK (SBC_MAX_NUM_OF_CHANNELS * SBC_MAX_NUM_OF_SUBBANDS)
+
+#include "sbc_types.h"
+
+typedef struct SBC_ENC_PARAMS_TAG
+{
+    SINT16 s16SamplingFreq;                         /* 16k, 32k, 44.1k or 48k*/
+    SINT16 s16ChannelMode;                          /* mono, dual, streo or joint streo*/
+    SINT16 s16NumOfSubBands;                        /* 4 or 8 */
+    SINT16 s16NumOfChannels;
+    SINT16 s16NumOfBlocks;                          /* 4, 8, 12 or 16*/
+    SINT16 s16AllocationMethod;                     /* loudness or SNR*/
+    SINT16 s16BitPool;                              /* 16*numOfSb for mono & dual;
+                                                       32*numOfSb for stereo & joint stereo */
+    UINT16 u16BitRate;
+    UINT8   u8NumPacketToEncode;                    /* number of sbc frame to encode. Default is 1 */
+#if (SBC_JOINT_STE_INCLUDED == TRUE)
+    SINT16 as16Join[SBC_MAX_NUM_OF_SUBBANDS];       /*1 if JS, 0 otherwise*/
+#endif
+
+    SINT16 s16MaxBitNeed;
+    SINT16 as16ScaleFactor[SBC_MAX_NUM_OF_CHANNELS*SBC_MAX_NUM_OF_SUBBANDS];
+
+    SINT16 *ps16NextPcmBuffer;
+#if (SBC_NO_PCM_CPY_OPTION == TRUE)
+    SINT16 *ps16PcmBuffer;
+#else
+    SINT16 as16PcmBuffer[SBC_MAX_NUM_FRAME*SBC_MAX_NUM_OF_BLOCKS * SBC_MAX_NUM_OF_CHANNELS * SBC_MAX_NUM_OF_SUBBANDS];
+#endif
+
+    SINT16  s16ScartchMemForBitAlloc[16];
+
+    SINT32  s32SbBuffer[SBC_MAX_NUM_OF_CHANNELS * SBC_MAX_NUM_OF_SUBBANDS * SBC_MAX_NUM_OF_BLOCKS];
+
+    SINT16 as16Bits[SBC_MAX_NUM_OF_CHANNELS*SBC_MAX_NUM_OF_SUBBANDS];
+
+    UINT8  *pu8Packet;
+    UINT8  *pu8NextPacket;
+    UINT16 FrameHeader;
+    UINT16 u16PacketLength;
+
+}SBC_ENC_PARAMS;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+SBC_API extern void SBC_Encoder(SBC_ENC_PARAMS *strEncParams);
+SBC_API extern void SBC_Encoder_Init(SBC_ENC_PARAMS *strEncParams);
+#ifdef __cplusplus
+}
+#endif
+#endif
diff --git a/embdrv/sbc/encoder/include/sbc_if.h b/embdrv/sbc/encoder/include/sbc_if.h
new file mode 100644
index 0000000..de8dd48
--- /dev/null
+++ b/embdrv/sbc/encoder/include/sbc_if.h
@@ -0,0 +1,47 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef _SBC_IF_H
+#define _SBC_IF_H
+
+#define PCM_BUFFER_SIZE 512
+
+/*
+ SBC_Init - called once for each track played
+
+ pcm_sample_freq - 4000 to 48000
+ channels - 1 mono 2 stereo
+ bits_per_sample - 8 or 16
+ return - 0 sucess
+*/
+
+int SBC_init(int pcm_sample_freq, int channels, int bits_per_sample);
+
+/*
+ SBC_write - called repeatedly with pcm_in pointer
+	increasing by length until track is finished.
+
+ pcm_in - pointer to PCM buffer
+ length - any
+ sbc_out - pointer to SBC output buffer
+ return - number of bytes written to sbc_out
+*/
+
+int SBC_write(unsigned char *pcm_in, int length, unsigned char *sbc_out);
+
+#endif
diff --git a/embdrv/sbc/encoder/include/sbc_types.h b/embdrv/sbc/encoder/include/sbc_types.h
new file mode 100644
index 0000000..d161051
--- /dev/null
+++ b/embdrv/sbc/encoder/include/sbc_types.h
@@ -0,0 +1,57 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Data type declarations.
+ *
+ ******************************************************************************/
+
+#ifndef SBC_TYPES_H
+#define SBC_TYPES_H
+
+#ifdef BUILDCFG
+#include "bt_target.h"
+#endif
+
+#include "data_types.h"
+
+typedef short SINT16;
+typedef long SINT32;
+
+#if (SBC_IPAQ_OPT == TRUE)
+
+#if (SBC_FOR_EMBEDDED_LINUX == TRUE)
+typedef long long SINT64;
+#else
+typedef __int64 SINT64;
+#endif
+
+#elif (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE) || (SBC_IS_64_MULT_IN_IDCT == TRUE)
+
+#if (SBC_FOR_EMBEDDED_LINUX == TRUE)
+typedef long long SINT64;
+#else
+typedef __int64 SINT64;
+#endif
+
+#endif
+
+#define abs32(x) ( (x >= 0) ? x : (-x) )
+
+#endif
diff --git a/embdrv/sbc/encoder/srce/sbc_analysis.c b/embdrv/sbc/encoder/srce/sbc_analysis.c
new file mode 100644
index 0000000..95079fa
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_analysis.c
@@ -0,0 +1,1107 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the code that performs Analysis of the input audio
+ *  stream.
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+/*#include <math.h>*/
+
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+#define WIND_4_SUBBANDS_0_1 (SINT32)0x01659F45  /* gas32CoeffFor4SBs[8] = -gas32CoeffFor4SBs[32] = 0x01659F45 */
+#define WIND_4_SUBBANDS_0_2 (SINT32)0x115B1ED2  /* gas32CoeffFor4SBs[16] = -gas32CoeffFor4SBs[24] = 0x115B1ED2 */
+#define WIND_4_SUBBANDS_1_0 (SINT32)0x001194E6  /* gas32CoeffFor4SBs[1 et 39] = 0x001194E6 */
+#define WIND_4_SUBBANDS_1_1 (SINT32)0x029DBAA3  /* gas32CoeffFor4SBs[9 et 31] = 0x029DBAA3 */
+#define WIND_4_SUBBANDS_1_2 (SINT32)0x18F55C90  /* gas32CoeffFor4SBs[17 et 23] = 0x18F55C90 */
+#define WIND_4_SUBBANDS_1_3 (SINT32)0xF60FAF37  /* gas32CoeffFor4SBs[15 et 25] = 0xF60FAF37 */
+#define WIND_4_SUBBANDS_1_4 (SINT32)0xFF9BB9D5  /* gas32CoeffFor4SBs[7 et 33] = 0xFF9BB9D5 */
+#define WIND_4_SUBBANDS_2_0 (SINT32)0x0030E2D3  /* gas32CoeffFor4SBs[2 et 38] = 0x0030E2D3 */
+#define WIND_4_SUBBANDS_2_1 (SINT32)0x03B23341  /* gas32CoeffFor4SBs[10 et 30] = 0x03B23341 */
+#define WIND_4_SUBBANDS_2_2 (SINT32)0x1F91CA46  /* gas32CoeffFor4SBs[18 et 22] = 0x1F91CA46 */
+#define WIND_4_SUBBANDS_2_3 (SINT32)0xFC4F91D4  /* gas32CoeffFor4SBs[14 et 26] = 0xFC4F91D4 */
+#define WIND_4_SUBBANDS_2_4 (SINT32)0x003D239B  /* gas32CoeffFor4SBs[6 et 34] = 0x003D239B */
+#define WIND_4_SUBBANDS_3_0 (SINT32)0x00599403  /* gas32CoeffFor4SBs[3 et 37] = 0x00599403 */
+#define WIND_4_SUBBANDS_3_1 (SINT32)0x041EEE40  /* gas32CoeffFor4SBs[11 et 29] = 0x041EEE40 */
+#define WIND_4_SUBBANDS_3_2 (SINT32)0x2412F251  /* gas32CoeffFor4SBs[19 et 21] = 0x2412F251 */
+#define WIND_4_SUBBANDS_3_3 (SINT32)0x00C8F2BC  /* gas32CoeffFor4SBs[13 et 27] = 0x00C8F2BC */
+#define WIND_4_SUBBANDS_3_4 (SINT32)0x007F88E4  /* gas32CoeffFor4SBs[5 et 35] = 0x007F88E4 */
+#define WIND_4_SUBBANDS_4_0 (SINT32)0x007DBCC8  /* gas32CoeffFor4SBs[4 et 36] = 0x007DBCC8 */
+#define WIND_4_SUBBANDS_4_1 (SINT32)0x034FEE2C  /* gas32CoeffFor4SBs[12 et 28] = 0x034FEE2C */
+#define WIND_4_SUBBANDS_4_2 (SINT32)0x25AC1FF2  /* gas32CoeffFor4SBs[20] = 0x25AC1FF2 */
+
+#define WIND_8_SUBBANDS_0_1 (SINT32)0x00B97348  /* 16 0x00B97348 */
+#define WIND_8_SUBBANDS_0_2 (SINT32)0x08B4307A  /* 32 0x08B4307A */
+#define WIND_8_SUBBANDS_1_0 (SINT32)0x00052173  /* 1 et 79 = 0x00052173 */
+#define WIND_8_SUBBANDS_1_1 (SINT32)0x01071B96  /* 17 et 63 = 0x01071B96 */
+#define WIND_8_SUBBANDS_1_2 (SINT32)0x0A9F3E9A  /* 33 et 47 = 0x0A9F3E9A*/
+#define WIND_8_SUBBANDS_1_3 (SINT32)0xF9312891  /* 31 et 49 = 0xF9312891 */
+#define WIND_8_SUBBANDS_1_4 (SINT32)0xFF8D6793  /* 15 et 65 = 0xFF8D6793 */
+#define WIND_8_SUBBANDS_2_0 (SINT32)0x000B3F71  /* 2 et 78 = 0x000B3F71 */
+#define WIND_8_SUBBANDS_2_1 (SINT32)0x0156B3CA  /* 18 et 62 = 0x0156B3CA */
+#define WIND_8_SUBBANDS_2_2 (SINT32)0x0C7D59B6  /* 34 et 46 = 0x0C7D59B6 */
+#define WIND_8_SUBBANDS_2_3 (SINT32)0xFAFF95FC  /* 30 et 50 = 0xFAFF95FC */
+#define WIND_8_SUBBANDS_2_4 (SINT32)0xFFC9F10E  /* 14 et 66 = 0xFFC9F10E */
+#define WIND_8_SUBBANDS_3_0 (SINT32)0x00122C7D  /* 3 et 77 = 0x00122C7D*/
+#define WIND_8_SUBBANDS_3_1 (SINT32)0x01A1B38B  /* 19 et 61 = 0x01A1B38B */
+#define WIND_8_SUBBANDS_3_2 (SINT32)0x0E3BB16F  /* 35 et 45 = 0x0E3BB16F */
+#define WIND_8_SUBBANDS_3_3 (SINT32)0xFCA86E7E  /* 29 et 51 = 0xFCA86E7E */
+#define WIND_8_SUBBANDS_3_4 (SINT32)0xFFFA2413  /* 13 et 67 = 0xFFFA2413 */
+#define WIND_8_SUBBANDS_4_0 (SINT32)0x001AFF89  /* 4 et 66 = 0x001AFF89 */
+#define WIND_8_SUBBANDS_4_1 (SINT32)0x01E0224C  /* 20 et 60 = 0x01E0224C */
+#define WIND_8_SUBBANDS_4_2 (SINT32)0x0FC721F9  /* 36 et 44 = 0x0FC721F9 */
+#define WIND_8_SUBBANDS_4_3 (SINT32)0xFE20435D  /* 28 et 52 = 0xFE20435D */
+#define WIND_8_SUBBANDS_4_4 (SINT32)0x001D8FD2  /* 12 et 68 = 0x001D8FD2 */
+#define WIND_8_SUBBANDS_5_0 (SINT32)0x00255A62  /* 5 et 75 = 0x00255A62 */
+#define WIND_8_SUBBANDS_5_1 (SINT32)0x0209291F  /* 21 et 59 = 0x0209291F */
+#define WIND_8_SUBBANDS_5_2 (SINT32)0x110ECEF0  /* 37 et 43 = 0x110ECEF0 */
+#define WIND_8_SUBBANDS_5_3 (SINT32)0xFF5EEB73  /* 27 et  53 = 0xFF5EEB73 */
+#define WIND_8_SUBBANDS_5_4 (SINT32)0x0034F8B6  /* 11 et 69 = 0x0034F8B6 */
+#define WIND_8_SUBBANDS_6_0 (SINT32)0x003060F4  /* 6 et 74 = 0x003060F4 */
+#define WIND_8_SUBBANDS_6_1 (SINT32)0x02138653  /* 22 et 58 = 0x02138653 */
+#define WIND_8_SUBBANDS_6_2 (SINT32)0x120435FA  /* 38 et 42 = 0x120435FA */
+#define WIND_8_SUBBANDS_6_3 (SINT32)0x005FD0FF  /* 26 et 54 = 0x005FD0FF */
+#define WIND_8_SUBBANDS_6_4 (SINT32)0x00415B75  /* 10 et 70 = 0x00415B75 */
+#define WIND_8_SUBBANDS_7_0 (SINT32)0x003A72E7  /* 7 et 73 = 0x003A72E7 */
+#define WIND_8_SUBBANDS_7_1 (SINT32)0x01F5F424  /* 23 et 57 = 0x01F5F424 */
+#define WIND_8_SUBBANDS_7_2 (SINT32)0x129C226F  /* 39 et 41 = 0x129C226F */
+#define WIND_8_SUBBANDS_7_3 (SINT32)0x01223EBA  /* 25 et 55 = 0x01223EBA */
+#define WIND_8_SUBBANDS_7_4 (SINT32)0x0044EF48  /* 9 et 71 = 0x0044EF48 */
+#define WIND_8_SUBBANDS_8_0 (SINT32)0x0041EC6A  /* 8 et 72 = 0x0041EC6A */
+#define WIND_8_SUBBANDS_8_1 (SINT32)0x01A7ECEF  /* 24 et 56 = 0x01A7ECEF */
+#define WIND_8_SUBBANDS_8_2 (SINT32)0x12CF6C75  /* 40 = 0x12CF6C75 */
+#else
+#define WIND_4_SUBBANDS_0_1 (SINT16)0x0166  /* gas32CoeffFor4SBs[8] = -gas32CoeffFor4SBs[32] = 0x01659F45 */
+#define WIND_4_SUBBANDS_0_2 (SINT16)0x115B  /* gas32CoeffFor4SBs[16] = -gas32CoeffFor4SBs[24] = 0x115B1ED2 */
+#define WIND_4_SUBBANDS_1_0 (SINT16)0x0012  /* gas32CoeffFor4SBs[1 et 39] = 0x001194E6 */
+#define WIND_4_SUBBANDS_1_1 (SINT16)0x029E  /* gas32CoeffFor4SBs[9 et 31] = 0x029DBAA3 */
+#define WIND_4_SUBBANDS_1_2 (SINT16)0x18F5  /* gas32CoeffFor4SBs[17 et 23] = 0x18F55C90 */
+#define WIND_4_SUBBANDS_1_3 (SINT16)0xF610  /* gas32CoeffFor4SBs[15 et 25] = 0xF60FAF37 */
+#define WIND_4_SUBBANDS_1_4 (SINT16)0xFF9C  /* gas32CoeffFor4SBs[7 et 33] = 0xFF9BB9D5 */
+#define WIND_4_SUBBANDS_2_0 (SINT16)0x0031  /* gas32CoeffFor4SBs[2 et 38] = 0x0030E2D3 */
+#define WIND_4_SUBBANDS_2_1 (SINT16)0x03B2  /* gas32CoeffFor4SBs[10 et 30] = 0x03B23341 */
+#define WIND_4_SUBBANDS_2_2 (SINT16)0x1F91  /* gas32CoeffFor4SBs[18 et 22] = 0x1F91CA46 */
+#define WIND_4_SUBBANDS_2_3 (SINT16)0xFC50  /* gas32CoeffFor4SBs[14 et 26] = 0xFC4F91D4 */
+#define WIND_4_SUBBANDS_2_4 (SINT16)0x003D  /* gas32CoeffFor4SBs[6 et 34] = 0x003D239B */
+#define WIND_4_SUBBANDS_3_0 (SINT16)0x005A  /* gas32CoeffFor4SBs[3 et 37] = 0x00599403 */
+#define WIND_4_SUBBANDS_3_1 (SINT16)0x041F  /* gas32CoeffFor4SBs[11 et 29] = 0x041EEE40 */
+#define WIND_4_SUBBANDS_3_2 (SINT16)0x2413  /* gas32CoeffFor4SBs[19 et 21] = 0x2412F251 */
+#define WIND_4_SUBBANDS_3_3 (SINT16)0x00C9  /* gas32CoeffFor4SBs[13 et 27] = 0x00C8F2BC */
+#define WIND_4_SUBBANDS_3_4 (SINT16)0x0080  /* gas32CoeffFor4SBs[5 et 35] = 0x007F88E4 */
+#define WIND_4_SUBBANDS_4_0 (SINT16)0x007E  /* gas32CoeffFor4SBs[4 et 36] = 0x007DBCC8 */
+#define WIND_4_SUBBANDS_4_1 (SINT16)0x0350  /* gas32CoeffFor4SBs[12 et 28] = 0x034FEE2C */
+#define WIND_4_SUBBANDS_4_2 (SINT16)0x25AC  /* gas32CoeffFor4SBs[20] = 25AC1FF2 */
+
+#define WIND_8_SUBBANDS_0_1 (SINT16)0x00B9  /* 16 0x12CF6C75 */
+#define WIND_8_SUBBANDS_0_2 (SINT16)0x08B4  /* 32 0x08B4307A */
+#define WIND_8_SUBBANDS_1_0 (SINT16)0x0005  /* 1 et 79 = 0x00052173 */
+#define WIND_8_SUBBANDS_1_1 (SINT16)0x0107  /* 17 et 63 = 0x01071B96 */
+#define WIND_8_SUBBANDS_1_2 (SINT16)0x0A9F  /* 33 et 47 = 0x0A9F3E9A*/
+#define WIND_8_SUBBANDS_1_3 (SINT16)0xF931  /* 31 et 49 = 0xF9312891 */
+#define WIND_8_SUBBANDS_1_4 (SINT16)0xFF8D  /* 15 et 65 = 0xFF8D6793 */
+#define WIND_8_SUBBANDS_2_0 (SINT16)0x000B  /* 2 et 78 = 0x000B3F71 */
+#define WIND_8_SUBBANDS_2_1 (SINT16)0x0157  /* 18 et 62 = 0x0156B3CA */
+#define WIND_8_SUBBANDS_2_2 (SINT16)0x0C7D  /* 34 et 46 = 0x0C7D59B6 */
+#define WIND_8_SUBBANDS_2_3 (SINT16)0xFB00  /* 30 et 50 = 0xFAFF95FC */
+#define WIND_8_SUBBANDS_2_4 (SINT16)0xFFCA  /* 14 et 66 = 0xFFC9F10E */
+#define WIND_8_SUBBANDS_3_0 (SINT16)0x0012  /* 3 et 77 = 0x00122C7D*/
+#define WIND_8_SUBBANDS_3_1 (SINT16)0x01A2  /* 19 et 61 = 0x01A1B38B */
+#define WIND_8_SUBBANDS_3_2 (SINT16)0x0E3C  /* 35 et 45 = 0x0E3BB16F */
+#define WIND_8_SUBBANDS_3_3 (SINT16)0xFCA8  /* 29 et 51 = 0xFCA86E7E */
+#define WIND_8_SUBBANDS_3_4 (SINT16)0xFFFA  /* 13 et 67 = 0xFFFA2413 */
+#define WIND_8_SUBBANDS_4_0 (SINT16)0x001B  /* 4 et 66 = 0x001AFF89 */
+#define WIND_8_SUBBANDS_4_1 (SINT16)0x01E0  /* 20 et 60 = 0x01E0224C */
+#define WIND_8_SUBBANDS_4_2 (SINT16)0x0FC7  /* 36 et 44 = 0x0FC721F9 */
+#define WIND_8_SUBBANDS_4_3 (SINT16)0xFE20  /* 28 et 52 = 0xFE20435D */
+#define WIND_8_SUBBANDS_4_4 (SINT16)0x001E  /* 12 et 68 = 0x001D8FD2 */
+#define WIND_8_SUBBANDS_5_0 (SINT16)0x0025  /* 5 et 75 = 0x00255A62 */
+#define WIND_8_SUBBANDS_5_1 (SINT16)0x0209  /* 21 et 59 = 0x0209291F */
+#define WIND_8_SUBBANDS_5_2 (SINT16)0x110F  /* 37 et 43 = 0x110ECEF0 */
+#define WIND_8_SUBBANDS_5_3 (SINT16)0xFF5F  /* 27 et  53 = 0xFF5EEB73 */
+#define WIND_8_SUBBANDS_5_4 (SINT16)0x0035  /* 11 et 69 = 0x0034F8B6 */
+#define WIND_8_SUBBANDS_6_0 (SINT16)0x0030  /* 6 et 74 = 0x003060F4 */
+#define WIND_8_SUBBANDS_6_1 (SINT16)0x0214  /* 22 et 58 = 0x02138653 */
+#define WIND_8_SUBBANDS_6_2 (SINT16)0x1204  /* 38 et 42 = 0x120435FA */
+#define WIND_8_SUBBANDS_6_3 (SINT16)0x0060  /* 26 et 54 = 0x005FD0FF */
+#define WIND_8_SUBBANDS_6_4 (SINT16)0x0041  /* 10 et 70 = 0x00415B75 */
+#define WIND_8_SUBBANDS_7_0 (SINT16)0x003A  /* 7 et 73 = 0x003A72E7 */
+#define WIND_8_SUBBANDS_7_1 (SINT16)0x01F6  /* 23 et 57 = 0x01F5F424 */
+#define WIND_8_SUBBANDS_7_2 (SINT16)0x129C  /* 39 et 41 = 0x129C226F */
+#define WIND_8_SUBBANDS_7_3 (SINT16)0x0122  /* 25 et 55 = 0x01223EBA */
+#define WIND_8_SUBBANDS_7_4 (SINT16)0x0045  /* 9 et 71 = 0x0044EF48 */
+#define WIND_8_SUBBANDS_8_0 (SINT16)0x0042  /* 8 et 72 = 0x0041EC6A */
+#define WIND_8_SUBBANDS_8_1 (SINT16)0x01A8  /* 24 et 56 = 0x01A7ECEF */
+#define WIND_8_SUBBANDS_8_2 (SINT16)0x12CF  /* 40 = 0x12CF6C75 */
+#endif
+
+#if (SBC_USE_ARM_PRAGMA==TRUE)
+#pragma arm section zidata = "sbc_s32_analysis_section"
+#endif
+static SINT32   s32DCTY[16]  = {0};
+static SINT32   s32X[ENC_VX_BUFFER_SIZE/2];
+static SINT16   *s16X=(SINT16*) s32X;      /* s16X must be 32 bits aligned cf  SHIFTUP_X8_2*/
+#if (SBC_USE_ARM_PRAGMA==TRUE)
+#pragma arm section zidata
+#endif
+
+/* This macro is for 4 subbands */
+#define SHIFTUP_X4                                                               \
+{                                                                                   \
+    ps32X=(SINT32 *)(s16X+EncMaxShiftCounter+38);                                 \
+    for (i=0;i<9;i++)                                                               \
+    {                                                                               \
+        *ps32X=*(ps32X-2-(ShiftCounter>>1));  ps32X--;                                 \
+        *ps32X=*(ps32X-2-(ShiftCounter>>1));  ps32X--;                                 \
+    }                                                                               \
+}
+#define SHIFTUP_X4_2                                                              \
+{                                                                                   \
+    ps32X=(SINT32 *)(s16X+EncMaxShiftCounter+38);                                   \
+    ps32X2=(SINT32 *)(s16X+(EncMaxShiftCounter<<1)+78);                             \
+    for (i=0;i<9;i++)                                                               \
+    {                                                                               \
+        *ps32X=*(ps32X-2-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-2-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+        *ps32X=*(ps32X-2-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-2-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+    }                                                                               \
+}
+
+/* This macro is for 8 subbands */
+#define SHIFTUP_X8                                                               \
+{                                                                                   \
+    ps32X=(SINT32 *)(s16X+EncMaxShiftCounter+78);                                 \
+    for (i=0;i<9;i++)                                                               \
+    {                                                                               \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  ps32X--;                                 \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  ps32X--;                                 \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  ps32X--;                                 \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  ps32X--;                                 \
+    }                                                                               \
+}
+#define SHIFTUP_X8_2                                                               \
+{                                                                                   \
+    ps32X=(SINT32 *)(s16X+EncMaxShiftCounter+78);                                   \
+    ps32X2=(SINT32 *)(s16X+(EncMaxShiftCounter<<1)+158);                             \
+    for (i=0;i<9;i++)                                                               \
+    {                                                                               \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-4-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-4-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-4-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+        *ps32X=*(ps32X-4-(ShiftCounter>>1));  *(ps32X2)=*(ps32X2-4-(ShiftCounter>>1)); ps32X--;  ps32X2--;                     \
+    }                                                                               \
+}
+
+#if (SBC_ARM_ASM_OPT==TRUE)
+#define WINDOW_ACCU_8_0 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_0_1,(s16X[ChOffset+16]-s16X[ChOffset+64]);\
+        MLA s32Hi,WIND_8_SUBBANDS_0_2,(s16X[ChOffset+32]-s16X[ChOffset+48]),s32Hi;\
+        MOV s32DCTY[0],s32Hi;\
+    }\
+}
+#define WINDOW_ACCU_8_1_15 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_1_0,s16X[ChOffset+1];\
+        MUL s32Hi2,WIND_8_SUBBANDS_1_0,s16X[ChOffset+64+15];\
+        MLA s32Hi,WIND_8_SUBBANDS_1_1,s16X[ChOffset+16+1],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_1_1,s16X[ChOffset+48+15],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_1_2,s16X[ChOffset+32+1],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_1_2,s16X[ChOffset+32+15],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_1_3,s16X[ChOffset+48+1],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_1_3,s16X[ChOffset+16+15],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_1_4,s16X[ChOffset+64+1],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_1_4,s16X[ChOffset+15],s32Hi2;\
+        MOV s32DCTY[1],s32Hi;\
+        MOV s32DCTY[15],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_2_14 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_2_0,s16X[ChOffset+2];\
+        MUL s32Hi2,WIND_8_SUBBANDS_2_0,s16X[ChOffset+64+14];\
+        MLA s32Hi,WIND_8_SUBBANDS_2_1,s16X[ChOffset+16+2],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_2_1,s16X[ChOffset+48+14],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_2_2,s16X[ChOffset+32+2],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_2_2,s16X[ChOffset+32+14],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_2_3,s16X[ChOffset+48+2],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_2_3,s16X[ChOffset+16+14],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_2_4,s16X[ChOffset+64+2],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_2_4,s16X[ChOffset+14],s32Hi2;\
+        MOV s32DCTY[2],s32Hi;\
+        MOV s32DCTY[14],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_3_13 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_3_0,s16X[ChOffset+3];\
+        MUL s32Hi2,WIND_8_SUBBANDS_3_0,s16X[ChOffset+64+13];\
+        MLA s32Hi,WIND_8_SUBBANDS_3_1,s16X[ChOffset+16+3],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_3_1,s16X[ChOffset+48+13],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_3_2,s16X[ChOffset+32+3],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_3_2,s16X[ChOffset+32+13],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_3_3,s16X[ChOffset+48+3],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_3_3,s16X[ChOffset+16+13],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_3_4,s16X[ChOffset+64+3],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_3_4,s16X[ChOffset+13],s32Hi2;\
+        MOV s32DCTY[3],s32Hi;\
+        MOV s32DCTY[13],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_4_12 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_4_0,s16X[ChOffset+4];\
+        MUL s32Hi2,WIND_8_SUBBANDS_4_0,s16X[ChOffset+64+12];\
+        MLA s32Hi,WIND_8_SUBBANDS_4_1,s16X[ChOffset+16+4],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_4_1,s16X[ChOffset+48+12],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_4_2,s16X[ChOffset+32+4],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_4_2,s16X[ChOffset+32+12],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_4_3,s16X[ChOffset+48+4],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_4_3,s16X[ChOffset+16+12],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_4_4,s16X[ChOffset+64+4],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_4_4,s16X[ChOffset+12],s32Hi2;\
+        MOV s32DCTY[4],s32Hi;\
+        MOV s32DCTY[12],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_5_11 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_5_0,s16X[ChOffset+5];\
+        MUL s32Hi2,WIND_8_SUBBANDS_5_0,s16X[ChOffset+64+11];\
+        MLA s32Hi,WIND_8_SUBBANDS_5_1,s16X[ChOffset+16+5],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_5_1,s16X[ChOffset+48+11],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_5_2,s16X[ChOffset+32+5],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_5_2,s16X[ChOffset+32+11],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_5_3,s16X[ChOffset+48+5],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_5_3,s16X[ChOffset+16+11],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_5_4,s16X[ChOffset+64+5],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_5_4,s16X[ChOffset+11],s32Hi2;\
+        MOV s32DCTY[5],s32Hi;\
+        MOV s32DCTY[11],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_6_10 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_6_0,s16X[ChOffset+6];\
+        MUL s32Hi2,WIND_8_SUBBANDS_6_0,s16X[ChOffset+64+10];\
+        MLA s32Hi,WIND_8_SUBBANDS_6_1,s16X[ChOffset+16+6],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_6_1,s16X[ChOffset+48+10],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_6_2,s16X[ChOffset+32+6],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_6_2,s16X[ChOffset+32+10],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_6_3,s16X[ChOffset+48+6],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_6_3,s16X[ChOffset+16+10],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_6_4,s16X[ChOffset+64+6],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_6_4,s16X[ChOffset+10],s32Hi2;\
+        MOV s32DCTY[6],s32Hi;\
+        MOV s32DCTY[10],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_7_9 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_7_0,s16X[ChOffset+7];\
+        MUL s32Hi2,WIND_8_SUBBANDS_7_0,s16X[ChOffset+64+9];\
+        MLA s32Hi,WIND_8_SUBBANDS_7_1,s16X[ChOffset+16+7],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_7_1,s16X[ChOffset+48+9],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_7_2,s16X[ChOffset+32+7],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_7_2,s16X[ChOffset+32+9],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_7_3,s16X[ChOffset+48+7],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_7_3,s16X[ChOffset+16+9],s32Hi2;\
+        MLA s32Hi,WIND_8_SUBBANDS_7_4,s16X[ChOffset+64+7],s32Hi;\
+        MLA s32Hi2,WIND_8_SUBBANDS_7_4,s16X[ChOffset+9],s32Hi2;\
+        MOV s32DCTY[7],s32Hi;\
+        MOV s32DCTY[9],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_8_8 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_8_SUBBANDS_8_0,(s16X[ChOffset+8]+s16X[ChOffset+8+64]);\
+        MLA s32Hi,WIND_8_SUBBANDS_8_1,(s16X[ChOffset+8+16]+s16X[ChOffset+8+64]),s32Hi;\
+        MLA s32Hi,WIND_8_SUBBANDS_8_2,s16X[ChOffset+8+32],s32Hi;\
+        MOV s32DCTY[8],s32Hi;\
+    }\
+}
+#define WINDOW_ACCU_4_0 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_4_SUBBANDS_0_1,(s16X[ChOffset+8]-s16X[ChOffset+32]);\
+        MLA s32Hi,WIND_4_SUBBANDS_0_2,(s16X[ChOffset+16]-s16X[ChOffset+24]),s32Hi;\
+        MOV s32DCTY[0],s32Hi;\
+    }\
+}
+#define WINDOW_ACCU_4_1_7 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_4_SUBBANDS_1_0,s16X[ChOffset+1];\
+        MUL s32Hi2,WIND_4_SUBBANDS_1_0,s16X[ChOffset+32+7];\
+        MLA s32Hi,WIND_4_SUBBANDS_1_1,s16X[ChOffset+8+1],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_1_1,s16X[ChOffset+24+7],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_1_2,s16X[ChOffset+16+1],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_1_2,s16X[ChOffset+16+7],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_1_3,s16X[ChOffset+24+1],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_1_3,s16X[ChOffset+8+7],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_1_4,s16X[ChOffset+32+1],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_1_4,s16X[ChOffset+7],s32Hi2;\
+        MOV s32DCTY[1],s32Hi;\
+        MOV s32DCTY[7],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_4_2_6 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_4_SUBBANDS_2_0,s16X[ChOffset+2];\
+        MUL s32Hi2,WIND_4_SUBBANDS_2_0,s16X[ChOffset+32+6];\
+        MLA s32Hi,WIND_4_SUBBANDS_2_1,s16X[ChOffset+8+2],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_2_1,s16X[ChOffset+24+6],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_2_2,s16X[ChOffset+16+2],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_2_2,s16X[ChOffset+16+6],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_2_3,s16X[ChOffset+24+2],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_2_3,s16X[ChOffset+8+6],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_2_4,s16X[ChOffset+32+2],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_2_4,s16X[ChOffset+6],s32Hi2;\
+        MOV s32DCTY[2],s32Hi;\
+        MOV s32DCTY[6],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_4_3_5 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_4_SUBBANDS_3_0,s16X[ChOffset+3];\
+        MUL s32Hi2,WIND_4_SUBBANDS_3_0,s16X[ChOffset+32+5];\
+        MLA s32Hi,WIND_4_SUBBANDS_3_1,s16X[ChOffset+8+3],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_3_1,s16X[ChOffset+24+5],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_3_2,s16X[ChOffset+16+3],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_3_2,s16X[ChOffset+16+5],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_3_3,s16X[ChOffset+24+3],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_3_3,s16X[ChOffset+8+5],s32Hi2;\
+        MLA s32Hi,WIND_4_SUBBANDS_3_4,s16X[ChOffset+32+3],s32Hi;\
+        MLA s32Hi2,WIND_4_SUBBANDS_3_4,s16X[ChOffset+5],s32Hi2;\
+        MOV s32DCTY[3],s32Hi;\
+        MOV s32DCTY[5],s32Hi2;\
+    }\
+}
+#define WINDOW_ACCU_4_4 \
+{\
+    __asm\
+    {\
+        MUL s32Hi,WIND_4_SUBBANDS_4_0,(s16X[ChOffset+4]+s16X[ChOffset+4+32]);\
+        MLA s32Hi,WIND_4_SUBBANDS_4_1,(s16X[ChOffset+4+8]+s16X[ChOffset+4+24]),s32Hi;\
+        MLA s32Hi,WIND_4_SUBBANDS_4_2,s16X[ChOffset+4+16],s32Hi;\
+        MOV s32DCTY[4],s32Hi;\
+    }\
+}
+
+#define WINDOW_PARTIAL_4 \
+{\
+    WINDOW_ACCU_4_0;     WINDOW_ACCU_4_1_7;\
+    WINDOW_ACCU_4_2_6;   WINDOW_ACCU_4_3_5;\
+    WINDOW_ACCU_4_4;\
+}
+
+#define WINDOW_PARTIAL_8 \
+{\
+    WINDOW_ACCU_8_0;     WINDOW_ACCU_8_1_15;\
+    WINDOW_ACCU_8_2_14;  WINDOW_ACCU_8_3_13;\
+    WINDOW_ACCU_8_4_12;  WINDOW_ACCU_8_5_11;\
+    WINDOW_ACCU_8_6_10;  WINDOW_ACCU_8_7_9;\
+    WINDOW_ACCU_8_8;\
+}
+
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+#define WINDOW_ACCU_8_0 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_0_1*(SINT64)(s16X[ChOffset+16]-s16X[ChOffset+64]);\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_0_2*(SINT64)(s16X[ChOffset+32]-s16X[ChOffset+48]);\
+    s32DCTY[0]=(SINT32)(s64Temp>>16);\
+}
+#define WINDOW_ACCU_8_1_15 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_1_0*(SINT64)s16X[ChOffset+1];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_1_0*(SINT64)s16X[ChOffset+64+15];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_1_1*(SINT64)s16X[ChOffset+16+1];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_1_1*(SINT64)s16X[ChOffset+48+15];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_1_2*(SINT64)s16X[ChOffset+32+1];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_1_2*(SINT64)s16X[ChOffset+32+15];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_1_3*(SINT64)s16X[ChOffset+48+1];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_1_3*(SINT64)s16X[ChOffset+16+15];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_1_4*(SINT64)s16X[ChOffset+64+1];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_1_4*(SINT64)s16X[ChOffset+15];\
+    s32DCTY[1]=(SINT32)(s64Temp>>16);\
+    s32DCTY[15]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_2_14 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_2_0*(SINT64)s16X[ChOffset+2];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_2_0*(SINT64)s16X[ChOffset+64+14];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_2_1*(SINT64)s16X[ChOffset+16+2];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_2_1*(SINT64)s16X[ChOffset+48+14];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_2_2*(SINT64)s16X[ChOffset+32+2];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_2_2*(SINT64)s16X[ChOffset+32+14];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_2_3*(SINT64)s16X[ChOffset+48+2];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_2_3*(SINT64)s16X[ChOffset+16+14];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_2_4*(SINT64)s16X[ChOffset+64+2];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_2_4*(SINT64)s16X[ChOffset+14];\
+    s32DCTY[2]=(SINT32)(s64Temp>>16);\
+    s32DCTY[14]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_3_13 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_3_0*(SINT64)s16X[ChOffset+3];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_3_0*(SINT64)s16X[ChOffset+64+13];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_3_1*(SINT64)s16X[ChOffset+16+3];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_3_1*(SINT64)s16X[ChOffset+48+13];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_3_2*(SINT64)s16X[ChOffset+32+3];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_3_2*(SINT64)s16X[ChOffset+32+13];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_3_3*(SINT64)s16X[ChOffset+48+3];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_3_3*(SINT64)s16X[ChOffset+16+13];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_3_4*(SINT64)s16X[ChOffset+64+3];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_3_4*(SINT64)s16X[ChOffset+13];\
+    s32DCTY[3]=(SINT32)(s64Temp>>16);\
+    s32DCTY[13]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_4_12 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_4_0*(SINT64)s16X[ChOffset+4];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_4_0*(SINT64)s16X[ChOffset+64+12];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_4_1*(SINT64)s16X[ChOffset+16+4];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_4_1*(SINT64)s16X[ChOffset+48+12];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_4_2*(SINT64)s16X[ChOffset+32+4];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_4_2*(SINT64)s16X[ChOffset+32+12];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_4_3*(SINT64)s16X[ChOffset+48+4];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_4_3*(SINT64)s16X[ChOffset+16+12];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_4_4*(SINT64)s16X[ChOffset+64+4];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_4_4*(SINT64)s16X[ChOffset+12];\
+    s32DCTY[4]=(SINT32)(s64Temp>>16);\
+    s32DCTY[12]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_5_11 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_5_0*(SINT64)s16X[ChOffset+5];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_5_0*(SINT64)s16X[ChOffset+64+11];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_5_1*(SINT64)s16X[ChOffset+16+5];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_5_1*(SINT64)s16X[ChOffset+48+11];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_5_2*(SINT64)s16X[ChOffset+32+5];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_5_2*(SINT64)s16X[ChOffset+32+11];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_5_3*(SINT64)s16X[ChOffset+48+5];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_5_3*(SINT64)s16X[ChOffset+16+11];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_5_4*(SINT64)s16X[ChOffset+64+5];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_5_4*(SINT64)s16X[ChOffset+11];\
+    s32DCTY[5]=(SINT32)(s64Temp>>16);\
+    s32DCTY[11]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_6_10 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_6_0*(SINT64)s16X[ChOffset+6];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_6_0*(SINT64)s16X[ChOffset+64+10];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_6_1*(SINT64)s16X[ChOffset+16+6];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_6_1*(SINT64)s16X[ChOffset+48+10];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_6_2*(SINT64)s16X[ChOffset+32+6];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_6_2*(SINT64)s16X[ChOffset+32+10];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_6_3*(SINT64)s16X[ChOffset+48+6];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_6_3*(SINT64)s16X[ChOffset+16+10];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_6_4*(SINT64)s16X[ChOffset+64+6];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_6_4*(SINT64)s16X[ChOffset+10];\
+    s32DCTY[6]=(SINT32)(s64Temp>>16);\
+    s32DCTY[10]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_7_9 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_7_0*(SINT64)s16X[ChOffset+7];\
+    s64Temp2=(SINT64)WIND_8_SUBBANDS_7_0*(SINT64)s16X[ChOffset+64+9];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_7_1*(SINT64)s16X[ChOffset+16+7];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_7_1*(SINT64)s16X[ChOffset+48+9];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_7_2*(SINT64)s16X[ChOffset+32+7];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_7_2*(SINT64)s16X[ChOffset+32+9];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_7_3*(SINT64)s16X[ChOffset+48+7];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_7_3*(SINT64)s16X[ChOffset+16+9];\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_7_4*(SINT64)s16X[ChOffset+64+7];\
+    s64Temp2+=(SINT64)WIND_8_SUBBANDS_7_4*(SINT64)s16X[ChOffset+9];\
+    s32DCTY[7]=(SINT32)(s64Temp>>16);\
+    s32DCTY[9]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_8_8 \
+{\
+    s64Temp=(SINT64)WIND_8_SUBBANDS_8_0*(SINT64)(s16X[ChOffset+8]+s16X[ChOffset+64+8]);\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_8_1*(SINT64)(s16X[ChOffset+16+8]+s16X[ChOffset+48+8]);\
+    s64Temp+=(SINT64)WIND_8_SUBBANDS_8_2*(SINT64)s16X[ChOffset+32+8];\
+    s32DCTY[8]=(SINT32)(s64Temp>>16);\
+}
+#define WINDOW_ACCU_4_0 \
+{\
+    s64Temp=(SINT64)WIND_4_SUBBANDS_0_1*(SINT64)(s16X[ChOffset+8]-s16X[ChOffset+32]);\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_0_2*(SINT64)(s16X[ChOffset+16]-s16X[ChOffset+24]);\
+    s32DCTY[0]=(SINT32)(s64Temp>>16);\
+}
+#define WINDOW_ACCU_4_1_7 \
+{\
+    s64Temp=(SINT64)WIND_4_SUBBANDS_1_0*(SINT64)s16X[ChOffset+1];\
+    s64Temp2=(SINT64)WIND_4_SUBBANDS_1_0*(SINT64)s16X[ChOffset+32+7];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_1_1*(SINT64)s16X[ChOffset+8+1];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_1_1*(SINT64)s16X[ChOffset+24+7];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_1_2*(SINT64)s16X[ChOffset+16+1];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_1_2*(SINT64)s16X[ChOffset+16+7];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_1_3*(SINT64)s16X[ChOffset+24+1];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_1_3*(SINT64)s16X[ChOffset+8+7];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_1_4*(SINT64)s16X[ChOffset+32+1];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_1_4*(SINT64)s16X[ChOffset+7];\
+    s32DCTY[1]=(SINT32)(s64Temp>>16);\
+    s32DCTY[7]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_4_2_6 \
+{\
+    s64Temp=(SINT64)WIND_4_SUBBANDS_2_0*(SINT64)s16X[ChOffset+2];\
+    s64Temp2=(SINT64)WIND_4_SUBBANDS_2_0*(SINT64)s16X[ChOffset+32+6];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_2_1*(SINT64)s16X[ChOffset+8+2];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_2_1*(SINT64)s16X[ChOffset+24+6];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_2_2*(SINT64)s16X[ChOffset+16+2];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_2_2*(SINT64)s16X[ChOffset+16+6];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_2_3*(SINT64)s16X[ChOffset+24+2];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_2_3*(SINT64)s16X[ChOffset+8+6];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_2_4*(SINT64)s16X[ChOffset+32+2];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_2_4*(SINT64)s16X[ChOffset+6];\
+    s32DCTY[2]=(SINT32)(s64Temp>>16);\
+    s32DCTY[6]=(SINT32)(s64Temp2>>16);\
+}
+#define WINDOW_ACCU_4_3_5 \
+{\
+    s64Temp=(SINT64)WIND_4_SUBBANDS_3_0*(SINT64)s16X[ChOffset+3];\
+    s64Temp2=(SINT64)WIND_4_SUBBANDS_3_0*(SINT64)s16X[ChOffset+32+5];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_3_1*(SINT64)s16X[ChOffset+8+3];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_3_1*(SINT64)s16X[ChOffset+24+5];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_3_2*(SINT64)s16X[ChOffset+16+3];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_3_2*(SINT64)s16X[ChOffset+16+5];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_3_3*(SINT64)s16X[ChOffset+24+3];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_3_3*(SINT64)s16X[ChOffset+8+5];\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_3_4*(SINT64)s16X[ChOffset+32+3];\
+    s64Temp2+=(SINT64)WIND_4_SUBBANDS_3_4*(SINT64)s16X[ChOffset+5];\
+    s32DCTY[3]=(SINT32)(s64Temp>>16);\
+    s32DCTY[5]=(SINT32)(s64Temp2>>16);\
+}
+
+#define WINDOW_ACCU_4_4 \
+{\
+    s64Temp=(SINT64)WIND_4_SUBBANDS_4_0*(SINT64)(s16X[ChOffset+4]+s16X[ChOffset+4+32]);\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_4_1*(SINT64)(s16X[ChOffset+4+8]+s16X[ChOffset+4+24]);\
+    s64Temp+=(SINT64)WIND_4_SUBBANDS_4_2*(SINT64)s16X[ChOffset+4+16];\
+    s32DCTY[4]=(SINT32)(s64Temp>>16);\
+}
+#else /* SBC_IS_64_MULT_IN_WINDOW_ACCU == FALSE */
+#define WINDOW_ACCU_8_0 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_0_1*(SINT32)(s16X[ChOffset+16]-s16X[ChOffset+64]);\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_0_2*(SINT32)(s16X[ChOffset+32]-s16X[ChOffset+48]);\
+    s32DCTY[0]=(SINT32)s32Temp;\
+}
+#define WINDOW_ACCU_8_1_15 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_1_0*(SINT32)s16X[ChOffset+1];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_1_0*(SINT32)s16X[ChOffset+64+15];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_1_1*(SINT32)s16X[ChOffset+16+1];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_1_1*(SINT32)s16X[ChOffset+48+15];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_1_2*(SINT32)s16X[ChOffset+32+1];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_1_2*(SINT32)s16X[ChOffset+32+15];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_1_3*(SINT32)s16X[ChOffset+48+1];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_1_3*(SINT32)s16X[ChOffset+16+15];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_1_4*(SINT32)s16X[ChOffset+64+1];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_1_4*(SINT32)s16X[ChOffset+15];\
+    s32DCTY[1]=(SINT32)s32Temp;\
+    s32DCTY[15]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_2_14 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_2_0*(SINT32)s16X[ChOffset+2];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_2_0*(SINT32)s16X[ChOffset+64+14];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_2_1*(SINT32)s16X[ChOffset+16+2];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_2_1*(SINT32)s16X[ChOffset+48+14];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_2_2*(SINT32)s16X[ChOffset+32+2];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_2_2*(SINT32)s16X[ChOffset+32+14];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_2_3*(SINT32)s16X[ChOffset+48+2];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_2_3*(SINT32)s16X[ChOffset+16+14];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_2_4*(SINT32)s16X[ChOffset+64+2];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_2_4*(SINT32)s16X[ChOffset+14];\
+    s32DCTY[2]=(SINT32)s32Temp;\
+    s32DCTY[14]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_3_13 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_3_0*(SINT32)s16X[ChOffset+3];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_3_0*(SINT32)s16X[ChOffset+64+13];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_3_1*(SINT32)s16X[ChOffset+16+3];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_3_1*(SINT32)s16X[ChOffset+48+13];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_3_2*(SINT32)s16X[ChOffset+32+3];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_3_2*(SINT32)s16X[ChOffset+32+13];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_3_3*(SINT32)s16X[ChOffset+48+3];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_3_3*(SINT32)s16X[ChOffset+16+13];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_3_4*(SINT32)s16X[ChOffset+64+3];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_3_4*(SINT32)s16X[ChOffset+13];\
+    s32DCTY[3]=(SINT32)s32Temp;\
+    s32DCTY[13]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_4_12 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_4_0*(SINT32)s16X[ChOffset+4];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_4_0*(SINT32)s16X[ChOffset+64+12];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_4_1*(SINT32)s16X[ChOffset+16+4];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_4_1*(SINT32)s16X[ChOffset+48+12];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_4_2*(SINT32)s16X[ChOffset+32+4];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_4_2*(SINT32)s16X[ChOffset+32+12];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_4_3*(SINT32)s16X[ChOffset+48+4];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_4_3*(SINT32)s16X[ChOffset+16+12];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_4_4*(SINT32)s16X[ChOffset+64+4];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_4_4*(SINT32)s16X[ChOffset+12];\
+    s32DCTY[4]=(SINT32)s32Temp;\
+    s32DCTY[12]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_5_11 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_5_0*(SINT32)s16X[ChOffset+5];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_5_0*(SINT32)s16X[ChOffset+64+11];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_5_1*(SINT32)s16X[ChOffset+16+5];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_5_1*(SINT32)s16X[ChOffset+48+11];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_5_2*(SINT32)s16X[ChOffset+32+5];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_5_2*(SINT32)s16X[ChOffset+32+11];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_5_3*(SINT32)s16X[ChOffset+48+5];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_5_3*(SINT32)s16X[ChOffset+16+11];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_5_4*(SINT32)s16X[ChOffset+64+5];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_5_4*(SINT32)s16X[ChOffset+11];\
+    s32DCTY[5]=(SINT32)s32Temp;\
+    s32DCTY[11]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_6_10 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_6_0*(SINT32)s16X[ChOffset+6];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_6_0*(SINT32)s16X[ChOffset+64+10];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_6_1*(SINT32)s16X[ChOffset+16+6];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_6_1*(SINT32)s16X[ChOffset+48+10];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_6_2*(SINT32)s16X[ChOffset+32+6];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_6_2*(SINT32)s16X[ChOffset+32+10];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_6_3*(SINT32)s16X[ChOffset+48+6];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_6_3*(SINT32)s16X[ChOffset+16+10];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_6_4*(SINT32)s16X[ChOffset+64+6];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_6_4*(SINT32)s16X[ChOffset+10];\
+    s32DCTY[6]=(SINT32)s32Temp;\
+    s32DCTY[10]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_7_9 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_7_0*(SINT32)s16X[ChOffset+7];\
+    s32Temp2=(SINT32)WIND_8_SUBBANDS_7_0*(SINT32)s16X[ChOffset+64+9];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_7_1*(SINT32)s16X[ChOffset+16+7];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_7_1*(SINT32)s16X[ChOffset+48+9];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_7_2*(SINT32)s16X[ChOffset+32+7];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_7_2*(SINT32)s16X[ChOffset+32+9];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_7_3*(SINT32)s16X[ChOffset+48+7];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_7_3*(SINT32)s16X[ChOffset+16+9];\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_7_4*(SINT32)s16X[ChOffset+64+7];\
+    s32Temp2+=(SINT32)WIND_8_SUBBANDS_7_4*(SINT32)s16X[ChOffset+9];\
+    s32DCTY[7]=(SINT32)s32Temp;\
+    s32DCTY[9]=(SINT32)s32Temp2;\
+}
+#define WINDOW_ACCU_8_8 \
+{\
+    s32Temp=(SINT32)WIND_8_SUBBANDS_8_0*(SINT32)(s16X[ChOffset+8]+s16X[ChOffset+64+8]);\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_8_1*(SINT32)(s16X[ChOffset+16+8]+s16X[ChOffset+48+8]);\
+    s32Temp+=(SINT32)WIND_8_SUBBANDS_8_2*(SINT32)s16X[ChOffset+32+8];\
+    s32DCTY[8]=(SINT32)s32Temp;\
+}
+#define WINDOW_ACCU_4_0 \
+{\
+    s32Temp=(SINT32)WIND_4_SUBBANDS_0_1*(SINT32)(s16X[ChOffset+8]-s16X[ChOffset+32]);\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_0_2*(SINT32)(s16X[ChOffset+16]-s16X[ChOffset+24]);\
+    s32DCTY[0]=(SINT32)(s32Temp);\
+}
+#define WINDOW_ACCU_4_1_7 \
+{\
+    s32Temp=(SINT32)WIND_4_SUBBANDS_1_0*(SINT32)s16X[ChOffset+1];\
+    s32Temp2=(SINT32)WIND_4_SUBBANDS_1_0*(SINT32)s16X[ChOffset+32+7];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_1_1*(SINT32)s16X[ChOffset+8+1];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_1_1*(SINT32)s16X[ChOffset+24+7];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_1_2*(SINT32)s16X[ChOffset+16+1];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_1_2*(SINT32)s16X[ChOffset+16+7];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_1_3*(SINT32)s16X[ChOffset+24+1];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_1_3*(SINT32)s16X[ChOffset+8+7];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_1_4*(SINT32)s16X[ChOffset+32+1];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_1_4*(SINT32)s16X[ChOffset+7];\
+    s32DCTY[1]=(SINT32)(s32Temp);\
+    s32DCTY[7]=(SINT32)(s32Temp2);\
+}
+#define WINDOW_ACCU_4_2_6 \
+{\
+    s32Temp=(SINT32)WIND_4_SUBBANDS_2_0*(SINT32)s16X[ChOffset+2];\
+    s32Temp2=(SINT32)WIND_4_SUBBANDS_2_0*(SINT32)s16X[ChOffset+32+6];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_2_1*(SINT32)s16X[ChOffset+8+2];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_2_1*(SINT32)s16X[ChOffset+24+6];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_2_2*(SINT32)s16X[ChOffset+16+2];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_2_2*(SINT32)s16X[ChOffset+16+6];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_2_3*(SINT32)s16X[ChOffset+24+2];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_2_3*(SINT32)s16X[ChOffset+8+6];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_2_4*(SINT32)s16X[ChOffset+32+2];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_2_4*(SINT32)s16X[ChOffset+6];\
+    s32DCTY[2]=(SINT32)(s32Temp);\
+    s32DCTY[6]=(SINT32)(s32Temp2);\
+}
+#define WINDOW_ACCU_4_3_5 \
+{\
+    s32Temp=(SINT32)WIND_4_SUBBANDS_3_0*(SINT32)s16X[ChOffset+3];\
+    s32Temp2=(SINT32)WIND_4_SUBBANDS_3_0*(SINT32)s16X[ChOffset+32+5];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_3_1*(SINT32)s16X[ChOffset+8+3];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_3_1*(SINT32)s16X[ChOffset+24+5];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_3_2*(SINT32)s16X[ChOffset+16+3];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_3_2*(SINT32)s16X[ChOffset+16+5];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_3_3*(SINT32)s16X[ChOffset+24+3];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_3_3*(SINT32)s16X[ChOffset+8+5];\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_3_4*(SINT32)s16X[ChOffset+32+3];\
+    s32Temp2+=(SINT32)WIND_4_SUBBANDS_3_4*(SINT32)s16X[ChOffset+5];\
+    s32DCTY[3]=(SINT32)(s32Temp);\
+    s32DCTY[5]=(SINT32)(s32Temp2);\
+}
+
+#define WINDOW_ACCU_4_4 \
+{\
+    s32Temp=(SINT32)WIND_4_SUBBANDS_4_0*(SINT32)(s16X[ChOffset+4]+s16X[ChOffset+4+32]);\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_4_1*(SINT32)(s16X[ChOffset+4+8]+s16X[ChOffset+4+24]);\
+    s32Temp+=(SINT32)WIND_4_SUBBANDS_4_2*(SINT32)s16X[ChOffset+4+16];\
+    s32DCTY[4]=(SINT32)(s32Temp);\
+}
+#endif
+#define WINDOW_PARTIAL_4 \
+{\
+    WINDOW_ACCU_4_0;     WINDOW_ACCU_4_1_7;\
+    WINDOW_ACCU_4_2_6;   WINDOW_ACCU_4_3_5;\
+    WINDOW_ACCU_4_4;\
+}
+
+#define WINDOW_PARTIAL_8 \
+{\
+    WINDOW_ACCU_8_0;         WINDOW_ACCU_8_1_15;\
+    WINDOW_ACCU_8_2_14;      WINDOW_ACCU_8_3_13;\
+    WINDOW_ACCU_8_4_12;      WINDOW_ACCU_8_5_11;\
+    WINDOW_ACCU_8_6_10;      WINDOW_ACCU_8_7_9;\
+    WINDOW_ACCU_8_8;\
+}
+#else
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+#define WINDOW_ACCU_4(i) \
+{\
+    s64Temp=((SINT64)gas32CoeffFor4SBs[i] * (SINT64)s16X[ChOffset+i]);                                    \
+    s64Temp+=((SINT64)gas32CoeffFor4SBs[(i+8)] * (SINT64)s16X[ChOffset+i+8]);                                    \
+    s64Temp+=((SINT64)gas32CoeffFor4SBs[(i+16)] * (SINT64)s16X[ChOffset+i+16]);                                    \
+    s64Temp+=((SINT64)gas32CoeffFor4SBs[(i+24)] * (SINT64)s16X[ChOffset+i+24]);                                    \
+    s64Temp+=((SINT64)gas32CoeffFor4SBs[(i+32)] * (SINT64)s16X[ChOffset+i+32]);                                    \
+    s32DCTY[i]=(SINT32)(s64Temp>>16);\
+	/*printf("s32DCTY4: 0x%x \n", s32DCTY[i]);*/\
+}
+#else
+#define WINDOW_ACCU_4(i) \
+{\
+    s32DCTY[i]=(gas32CoeffFor4SBs[i * 2] * s16X[ChOffset+i])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor4SBs[(i * 2) + 1]) * s16X[ChOffset+i]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor4SBs[(i+8) * 2] * s16X[ChOffset+i+8])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor4SBs[((i+8) * 2) + 1]) * s16X[ChOffset+i+8]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor4SBs[(i+16) * 2] * s16X[ChOffset+i+16])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor4SBs[((i+16) * 2) + 1]) * s16X[ChOffset+i+16]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor4SBs[(i+24) * 2] * s16X[ChOffset+i+24])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor4SBs[((i+24) * 2) + 1]) * s16X[ChOffset+i+24]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor4SBs[(i+32) * 2] * s16X[ChOffset+i+32])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor4SBs[((i+32) * 2) + 1]) * s16X[ChOffset+i+32]) >> 16);   \
+}
+#endif
+#define WINDOW_PARTIAL_4 \
+{\
+    WINDOW_ACCU_4(0);      WINDOW_ACCU_4(1);\
+    WINDOW_ACCU_4(2);      WINDOW_ACCU_4(3);\
+    WINDOW_ACCU_4(4);      WINDOW_ACCU_4(5);\
+    WINDOW_ACCU_4(6);      WINDOW_ACCU_4(7);\
+}
+
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+#define WINDOW_ACCU_8(i) \
+{\
+    s64Temp = ((((SINT64)gas32CoeffFor8SBs[i]      * (SINT64)s16X[ChOffset+i]   )));                 \
+    s64Temp+= ((((SINT64)gas32CoeffFor8SBs[(i+16)] * (SINT64)s16X[ChOffset+i+16])));                 \
+    s64Temp+= ((((SINT64)gas32CoeffFor8SBs[(i+32)] * (SINT64)s16X[ChOffset+i+32])));                 \
+    s64Temp+= ((((SINT64)gas32CoeffFor8SBs[(i+48)] * (SINT64)s16X[ChOffset+i+48])));                 \
+    s64Temp+= ((((SINT64)gas32CoeffFor8SBs[(i+64)] * (SINT64)s16X[ChOffset+i+64])));                 \
+	/*printf("s32DCTY8: %d= 0x%x * %d\n", s32DCTY[i], gas32CoeffFor8SBs[i], s16X[ChOffset+i]);*/     \
+    s32DCTY[i]=(SINT32)(s64Temp>>16);\
+}
+#else
+#define WINDOW_ACCU_8(i) \
+{\
+    s32DCTY[i]=(gas32CoeffFor8SBs[i * 2] * s16X[ChOffset+i])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor8SBs[(i * 2) + 1]) * s16X[ChOffset+i]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor8SBs[(i+16) * 2] * s16X[ChOffset+i+16])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor8SBs[((i+16) * 2) + 1]) * s16X[ChOffset+i+16]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor8SBs[(i+32) * 2] * s16X[ChOffset+i+32])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor8SBs[((i+32) * 2) + 1]) * s16X[ChOffset+i+32]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor8SBs[(i+48) * 2] * s16X[ChOffset+i+48])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor8SBs[((i+48) * 2) + 1]) * s16X[ChOffset+i+48]) >> 16);   \
+    s32DCTY[i]+=(gas32CoeffFor8SBs[(i+64) * 2] * s16X[ChOffset+i+64])                                    \
+            +  (((SINT32)(UINT16)(gas32CoeffFor8SBs[((i+64) * 2) + 1]) * s16X[ChOffset+i+64]) >> 16);   \
+	/*printf("s32DCTY8: %d = 0x%4x%4x * %d\n", s32DCTY[i], gas32CoeffFor8SBs[i * 2], (gas32CoeffFor8SBs[(i * 2) + 1]), s16X[ChOffset+i]);*/\
+    /*s32DCTY[i]=(SINT32)(s64Temp>>16);*/\
+}
+#endif
+#define WINDOW_PARTIAL_8 \
+{\
+    WINDOW_ACCU_8(0);      WINDOW_ACCU_8(1);\
+    WINDOW_ACCU_8(2);      WINDOW_ACCU_8(3);\
+    WINDOW_ACCU_8(4);      WINDOW_ACCU_8(5);\
+    WINDOW_ACCU_8(6);      WINDOW_ACCU_8(7);\
+    WINDOW_ACCU_8(8);      WINDOW_ACCU_8(9);\
+    WINDOW_ACCU_8(10);     WINDOW_ACCU_8(11);\
+    WINDOW_ACCU_8(12);     WINDOW_ACCU_8(13);\
+    WINDOW_ACCU_8(14);     WINDOW_ACCU_8(15);\
+}
+#endif
+#endif
+
+static SINT16 ShiftCounter=0;
+extern SINT16 EncMaxShiftCounter;
+/****************************************************************************
+* SbcAnalysisFilter - performs Analysis of the input audio stream
+*
+* RETURNS : N/A
+*/
+void SbcAnalysisFilter4(SBC_ENC_PARAMS *pstrEncParams)
+{
+    SINT16 *ps16PcmBuf;
+    SINT32 *ps32SbBuf;
+    SINT32  s32Blk,s32Ch;
+    SINT32  s32NumOfChannels, s32NumOfBlocks;
+    SINT32 i,*ps32X,*ps32X2;
+    SINT32 Offset,Offset2,ChOffset;
+#if (SBC_ARM_ASM_OPT==TRUE)
+    register SINT32 s32Hi,s32Hi2;
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+    register SINT64 s64Temp,s64Temp2;
+#else
+	register SINT32 s32Temp,s32Temp2;
+#endif
+#else
+
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+    SINT64 s64Temp;
+#endif
+
+#endif
+#endif
+
+    s32NumOfChannels = pstrEncParams->s16NumOfChannels;
+    s32NumOfBlocks   = pstrEncParams->s16NumOfBlocks;
+
+    ps16PcmBuf = pstrEncParams->ps16NextPcmBuffer;
+
+    ps32SbBuf  = pstrEncParams->s32SbBuffer;
+    Offset2=(SINT32)(EncMaxShiftCounter+40);
+    for (s32Blk=0; s32Blk <s32NumOfBlocks; s32Blk++)
+    {
+        Offset=(SINT32)(EncMaxShiftCounter-ShiftCounter);
+        /* Store new samples */
+        if (s32NumOfChannels==1)
+        {
+            s16X[3+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[2+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[1+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[0+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+        }
+        else
+        {
+            s16X[3+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+3+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[2+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+2+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[1+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+1+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[0+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+0+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+        }
+        for (s32Ch=0;s32Ch<s32NumOfChannels;s32Ch++)
+        {
+            ChOffset=s32Ch*Offset2+Offset;
+
+            WINDOW_PARTIAL_4
+
+            SBC_FastIDCT4(s32DCTY, ps32SbBuf);
+
+            ps32SbBuf +=SUB_BANDS_4;
+        }
+        if (s32NumOfChannels==1)
+        {
+            if (ShiftCounter>=EncMaxShiftCounter)
+            {
+                SHIFTUP_X4;
+                ShiftCounter=0;
+            }
+            else
+            {
+                ShiftCounter+=SUB_BANDS_4;
+            }
+        }
+        else
+        {
+            if (ShiftCounter>=EncMaxShiftCounter)
+            {
+                SHIFTUP_X4_2;
+                ShiftCounter=0;
+            }
+            else
+            {
+                ShiftCounter+=SUB_BANDS_4;
+            }
+        }
+    }
+}
+
+/* //////////////////////////////////////////////////////////////////////////////////////////////////////////////////// */
+void SbcAnalysisFilter8 (SBC_ENC_PARAMS *pstrEncParams)
+{
+    SINT16 *ps16PcmBuf;
+    SINT32 *ps32SbBuf;
+    SINT32  s32Blk,s32Ch;                                     /* counter for block*/
+    SINT32 Offset,Offset2;
+    SINT32  s32NumOfChannels, s32NumOfBlocks;
+    SINT32 i,*ps32X,*ps32X2;
+    SINT32 ChOffset;
+#if (SBC_ARM_ASM_OPT==TRUE)
+    register SINT32 s32Hi,s32Hi2;
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+    register SINT64 s64Temp,s64Temp2;
+#else
+	register SINT32 s32Temp,s32Temp2;
+#endif
+#else
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU == TRUE)
+    SINT64 s64Temp;
+#endif
+#endif
+#endif
+
+    s32NumOfChannels = pstrEncParams->s16NumOfChannels;
+    s32NumOfBlocks   = pstrEncParams->s16NumOfBlocks;
+
+    ps16PcmBuf = pstrEncParams->ps16NextPcmBuffer;
+
+    ps32SbBuf  = pstrEncParams->s32SbBuffer;
+    Offset2=(SINT32)(EncMaxShiftCounter+80);
+    for (s32Blk=0; s32Blk <s32NumOfBlocks; s32Blk++)
+    {
+        Offset=(SINT32)(EncMaxShiftCounter-ShiftCounter);
+        /* Store new samples */
+        if (s32NumOfChannels==1)
+        {
+            s16X[7+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[6+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[5+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[4+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[3+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[2+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[1+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+            s16X[0+Offset] = *ps16PcmBuf;   ps16PcmBuf++;
+        }
+        else
+        {
+            s16X[7+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+7+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[6+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+6+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[5+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+5+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[4+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+4+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[3+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+3+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[2+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+2+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[1+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+1+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+            s16X[0+Offset] = *ps16PcmBuf;        ps16PcmBuf++;
+            s16X[Offset2+0+Offset] = *ps16PcmBuf;     ps16PcmBuf++;
+        }
+        for (s32Ch=0;s32Ch<s32NumOfChannels;s32Ch++)
+        {
+            ChOffset=s32Ch*Offset2+Offset;
+
+            WINDOW_PARTIAL_8
+
+            SBC_FastIDCT8 (s32DCTY, ps32SbBuf);
+
+            ps32SbBuf +=SUB_BANDS_8;
+        }
+        if (s32NumOfChannels==1)
+        {
+            if (ShiftCounter>=EncMaxShiftCounter)
+            {
+                SHIFTUP_X8;
+                ShiftCounter=0;
+            }
+            else
+            {
+                ShiftCounter+=SUB_BANDS_8;
+            }
+        }
+        else
+        {
+            if (ShiftCounter>=EncMaxShiftCounter)
+            {
+                SHIFTUP_X8_2;
+                ShiftCounter=0;
+            }
+            else
+            {
+                ShiftCounter+=SUB_BANDS_8;
+            }
+        }
+    }
+}
+
+void SbcAnalysisInit (void)
+{
+    memset(s16X,0,ENC_VX_BUFFER_SIZE*sizeof(SINT16));
+    ShiftCounter=0;
+}
diff --git a/embdrv/sbc/encoder/srce/sbc_dct.c b/embdrv/sbc/encoder/srce/sbc_dct.c
new file mode 100644
index 0000000..0f6c9d3
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_dct.c
@@ -0,0 +1,245 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  source file for fast dct operations
+ *
+ ******************************************************************************/
+
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+#include "sbc_dct.h"
+
+
+
+/*******************************************************************************
+**
+** Function         SBC_FastIDCT8
+**
+** Description      implementation of fast DCT algorithm by Feig and Winograd
+**
+**
+** Returns          y = dct(pInVect)
+**
+**
+*******************************************************************************/
+
+#if (SBC_IS_64_MULT_IN_IDCT == FALSE)
+#define SBC_COS_PI_SUR_4            (0x00005a82)  /* ((0x8000) * 0.7071)     = cos(pi/4) */
+#define SBC_COS_PI_SUR_8            (0x00007641)  /* ((0x8000) * 0.9239)     = (cos(pi/8)) */
+#define SBC_COS_3PI_SUR_8           (0x000030fb)  /* ((0x8000) * 0.3827)     = (cos(3*pi/8)) */
+#define SBC_COS_PI_SUR_16           (0x00007d8a)  /* ((0x8000) * 0.9808))     = (cos(pi/16)) */
+#define SBC_COS_3PI_SUR_16          (0x00006a6d)  /* ((0x8000) * 0.8315))     = (cos(3*pi/16)) */
+#define SBC_COS_5PI_SUR_16          (0x0000471c)  /* ((0x8000) * 0.5556))     = (cos(5*pi/16)) */
+#define SBC_COS_7PI_SUR_16          (0x000018f8)  /* ((0x8000) * 0.1951))     = (cos(7*pi/16)) */
+#define SBC_IDCT_MULT(a,b,c) SBC_MULT_32_16_SIMPLIFIED(a,b,c)
+#else
+#define SBC_COS_PI_SUR_4            (0x5A827999)  /* ((0x80000000) * 0.707106781)      = (cos(pi/4)   ) */
+#define SBC_COS_PI_SUR_8            (0x7641AF3C)  /* ((0x80000000) * 0.923879533)      = (cos(pi/8)   ) */
+#define SBC_COS_3PI_SUR_8           (0x30FBC54D)  /* ((0x80000000) * 0.382683432)      = (cos(3*pi/8) ) */
+#define SBC_COS_PI_SUR_16           (0x7D8A5F3F)  /* ((0x80000000) * 0.98078528 ))     = (cos(pi/16)  ) */
+#define SBC_COS_3PI_SUR_16          (0x6A6D98A4)  /* ((0x80000000) * 0.831469612))     = (cos(3*pi/16)) */
+#define SBC_COS_5PI_SUR_16          (0x471CECE6)  /* ((0x80000000) * 0.555570233))     = (cos(5*pi/16)) */
+#define SBC_COS_7PI_SUR_16          (0x18F8B83C)  /* ((0x80000000) * 0.195090322))     = (cos(7*pi/16)) */
+#define SBC_IDCT_MULT(a,b,c) SBC_MULT_32_32(a,b,c)
+#endif /* SBC_IS_64_MULT_IN_IDCT */
+
+#if (SBC_FAST_DCT == FALSE)
+extern const SINT16 gas16AnalDCTcoeff8[];
+extern const SINT16 gas16AnalDCTcoeff4[];
+#endif
+
+void SBC_FastIDCT8(SINT32 *pInVect, SINT32 *pOutVect)
+{
+#if (SBC_FAST_DCT == TRUE)
+#if (SBC_ARM_ASM_OPT==TRUE)
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+    SINT64 s64Temp;
+#endif
+#else
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+    SINT32 s32HiTemp;
+#else
+    SINT32 s32In2Temp;
+    register SINT32 s32In1Temp;
+#endif
+#endif
+#endif
+
+    register SINT32 x0, x1, x2, x3, x4, x5, x6, x7,temp;
+    SINT32 res_even[4], res_odd[4];
+    /*x0= (pInVect[4])/2 ;*/
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4,pInVect[4], x0);
+    /*printf("x0 0x%x = %d = %d * %d\n", x0, x0, SBC_COS_PI_SUR_4, pInVect[4]);*/
+
+    x1 = (pInVect[3] + pInVect[5])  >>1;
+    x2 = (pInVect[2] + pInVect[6])  >>1;
+    x3 = (pInVect[1] + pInVect[7])  >>1;
+    x4 = (pInVect[0] + pInVect[8])  >>1;
+    x5 = (pInVect[9] - pInVect[15]) >>1;
+    x6 = (pInVect[10] - pInVect[14])>>1;
+    x7 = (pInVect[11] - pInVect[13])>>1;
+
+    /* 2-point IDCT of x0 and x4 as in (11) */
+    temp = x0 ;
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4, ( x0 + x4 ), x0);          /*x0 = ( x0 + x4 ) * cos(1*pi/4) ; */
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4, ( temp - x4 ), x4);        /*x4 = ( temp - x4 ) * cos(1*pi/4) ; */
+
+    /* rearrangement of x2 and x6 as in (15) */
+    x2 -=x6;
+    x6 <<= 1 ;
+
+    /* 2-point IDCT of x2 and x6 and post-multiplication as in (15) */
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4,x6, x6); /*x6 = x6 * cos(1*pi/4) ; */
+    temp = x2 ;
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_8,( x2 + x6 ), x2); /*x2 = ( x2 + x6 ) * cos(1*pi/8) ; */
+    SBC_IDCT_MULT(SBC_COS_3PI_SUR_8,( temp - x6 ), x6); /*x6 = ( temp - x6 ) * cos(3*pi/8) ;*/
+
+    /* 4-point IDCT of x0,x2,x4 and x6 as in (11) */
+    res_even[ 0 ] = x0 + x2 ;
+    res_even[ 1 ] = x4 + x6 ;
+    res_even[ 2 ] = x4 - x6 ;
+    res_even[ 3 ] = x0 - x2 ;
+
+
+    /* rearrangement of x1,x3,x5,x7 as in (15) */
+    x7 <<= 1 ;
+    x5 = ( x5 <<1 ) - x7 ;
+    x3 = ( x3 <<1 ) - x5 ;
+    x1 -= x3 >>1 ;
+
+    /* two-dimensional IDCT of x1 and x5 */
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4, x5, x5);          /*x5 = x5 * cos(1*pi/4) ; */
+    temp = x1 ;
+    x1 = x1 + x5 ;
+    x5 = temp - x5 ;
+
+    /* rearrangement of x3 and x7 as in (15) */
+    x3 -= x7;
+    x7 <<= 1 ;
+    SBC_IDCT_MULT(SBC_COS_PI_SUR_4, x7, x7);          /*x7 = x7 * cos(1*pi/4) ; */
+
+    /* 2-point IDCT of x3 and x7 and post-multiplication as in (15) */
+    temp = x3 ;
+    SBC_IDCT_MULT( SBC_COS_PI_SUR_8,( x3 + x7 ), x3);          /*x3 = ( x3 + x7 ) * cos(1*pi/8)  ; */
+    SBC_IDCT_MULT( SBC_COS_3PI_SUR_8,( temp - x7 ), x7);          /*x7 = ( temp - x7 ) * cos(3*pi/8) ;*/
+
+    /* 4-point IDCT of x1,x3,x5 and x7 and post multiplication by diagonal matrix as in (14) */
+    SBC_IDCT_MULT((SBC_COS_PI_SUR_16),   ( x1 + x3 ) ,   res_odd[0]); /*res_odd[ 0 ] = ( x1 + x3 ) * cos(1*pi/16) ; */
+    SBC_IDCT_MULT((SBC_COS_3PI_SUR_16),  ( x5 + x7 ) ,   res_odd[1]); /*res_odd[ 1 ] = ( x5 + x7 ) * cos(3*pi/16) ; */
+    SBC_IDCT_MULT((SBC_COS_5PI_SUR_16),  ( x5 - x7 ) ,   res_odd[2]); /*res_odd[ 2 ] = ( x5 - x7 ) * cos(5*pi/16) ; */
+    SBC_IDCT_MULT((SBC_COS_7PI_SUR_16),  ( x1 - x3 ) ,  res_odd[3]); /*res_odd[ 3 ] = ( x1 - x3 ) * cos(7*pi/16) ; */
+
+    /* additions and subtractions as in (9) */
+    pOutVect[0] = (res_even[ 0 ] + res_odd[ 0 ])  ;
+    pOutVect[1] = (res_even[ 1 ] + res_odd[ 1 ])  ;
+    pOutVect[2] = (res_even[ 2 ] + res_odd[ 2 ])  ;
+    pOutVect[3] = (res_even[ 3 ] + res_odd[ 3 ])  ;
+    pOutVect[7] = (res_even[ 0 ] - res_odd[ 0 ])  ;
+    pOutVect[6] = (res_even[ 1 ] - res_odd[ 1 ])  ;
+    pOutVect[5] = (res_even[ 2 ] - res_odd[ 2 ])  ;
+    pOutVect[4] = (res_even[ 3 ] - res_odd[ 3 ])  ;
+#else
+    UINT8 Index, k;
+    SINT32 temp;
+	/*Calculate 4 subband samples by matrixing*/
+    for(Index=0; Index<8; Index++)
+    {
+        temp = 0;
+        for(k=0; k<16; k++)
+        {
+            /*temp += (SINT32)(((SINT64)M[(Index*strEncParams->numOfSubBands*2)+k] * Y[k]) >> 16 );*/
+            temp += (gas16AnalDCTcoeff8[(Index*8*2)+k] * (pInVect[k] >> 16));
+            temp += ((gas16AnalDCTcoeff8[(Index*8*2)+k] * (pInVect[k] & 0xFFFF)) >> 16);
+        }
+        pOutVect[Index] = temp;
+    }
+#endif
+/*    printf("pOutVect: 0x%x;0x%x;0x%x;0x%x;0x%x;0x%x;0x%x;0x%x\n",\
+        pOutVect[0],pOutVect[1],pOutVect[2],pOutVect[3],pOutVect[4],pOutVect[5],pOutVect[6],pOutVect[7]);*/
+}
+
+/*******************************************************************************
+**
+** Function         SBC_FastIDCT4
+**
+** Description      implementation of fast DCT algorithm by Feig and Winograd
+**
+**
+** Returns          y = dct(x0)
+**
+**
+*******************************************************************************/
+void SBC_FastIDCT4(SINT32 *pInVect, SINT32 *pOutVect)
+{
+#if (SBC_FAST_DCT == TRUE)
+#if (SBC_ARM_ASM_OPT==TRUE)
+#else
+#if (SBC_IPAQ_OPT==TRUE)
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+    SINT64 s64Temp;
+#endif
+#else
+#if (SBC_IS_64_MULT_IN_IDCT == TRUE)
+    SINT32 s32HiTemp;
+#else
+    UINT16 s32In2Temp;
+    SINT32 s32In1Temp;
+#endif
+#endif
+#endif
+    SINT32 temp,x2;
+    SINT32 tmp[8];
+
+    x2=pInVect[2]>>1;
+    temp=(pInVect[0]+pInVect[4]);
+    SBC_IDCT_MULT((SBC_COS_PI_SUR_4>>1), temp , tmp[0]);
+    tmp[1]=x2-tmp[0];
+    tmp[0]+=x2;
+    temp=(pInVect[1]+pInVect[3]);
+    SBC_IDCT_MULT((SBC_COS_3PI_SUR_8>>1), temp , tmp[3]);
+    SBC_IDCT_MULT((SBC_COS_PI_SUR_8>>1), temp , tmp[2]);
+    temp=(pInVect[5]-pInVect[7]);
+    SBC_IDCT_MULT((SBC_COS_3PI_SUR_8>>1), temp , tmp[5]);
+    SBC_IDCT_MULT((SBC_COS_PI_SUR_8>>1), temp , tmp[4]);
+    tmp[6]=tmp[2]+tmp[5];
+    tmp[7]=tmp[3]-tmp[4];
+    pOutVect[0] = (tmp[0]+tmp[6]);
+    pOutVect[1] = (tmp[1]+tmp[7]);
+    pOutVect[2] = (tmp[1]-tmp[7]);
+    pOutVect[3] = (tmp[0]-tmp[6]);
+#else
+    UINT8 Index, k;
+    SINT32 temp;
+	/*Calculate 4 subband samples by matrixing*/
+    for(Index=0; Index<4; Index++)
+    {
+        temp = 0;
+        for(k=0; k<8; k++)
+        {
+            /*temp += (SINT32)(((SINT64)M[(Index*strEncParams->numOfSubBands*2)+k] * Y[k]) >> 16 ); */
+            temp += (gas16AnalDCTcoeff4[(Index*4*2)+k] * (pInVect[k] >> 16));
+            temp += ((gas16AnalDCTcoeff4[(Index*4*2)+k] * (pInVect[k] & 0xFFFF)) >> 16);
+        }
+        pOutVect[Index] = temp;
+    }
+#endif
+}
diff --git a/embdrv/sbc/encoder/srce/sbc_dct_coeffs.c b/embdrv/sbc/encoder/srce/sbc_dct_coeffs.c
new file mode 100644
index 0000000..c450c27
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_dct_coeffs.c
@@ -0,0 +1,200 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the coefficient table used for DCT computation in
+ *  analysis.
+ *
+ ******************************************************************************/
+
+#include "sbc_encoder.h"
+/*DCT coeff for 4 sub-band case.*/
+#if (SBC_FAST_DCT == FALSE)
+const SINT16 gas16AnalDCTcoeff4[] =
+{
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(0.0000*32768),
+	(SINT16)(-0.3827*32768),
+
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.3827*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.9239*32768),
+
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.0000*32768),
+	(SINT16)(-0.9239*32768),
+
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.3827*32768)
+};
+
+/*DCT coeff for 8 sub-band case.*/
+const SINT16 gas16AnalDCTcoeff8[] =
+{
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.9808*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(0.0000*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.8315*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.5556*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(0.0000*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(0.1951*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(0.0000*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.8315*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(-0.7071*32768),
+	(SINT16)(0.9808*32768),
+	(SINT16)(-0.9239*32768),
+	(SINT16)(0.5556*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(1.0000*32767),
+	(SINT16)(-0.9808*32768),
+	(SINT16)(0.9239*32768),
+	(SINT16)(-0.8315*32768),
+	(SINT16)(0.7071*32768),
+	(SINT16)(-0.5556*32768),
+	(SINT16)(0.3827*32768),
+	(SINT16)(-0.1951*32768),
+	(SINT16)(-0.0000*32768),
+	(SINT16)(0.1951*32768),
+	(SINT16)(-0.3827*32768),
+	(SINT16)(0.5556*32768)
+};
+#endif
diff --git a/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_mono.c b/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_mono.c
new file mode 100644
index 0000000..c033e24
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_mono.c
@@ -0,0 +1,199 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the code for bit allocation algorithm. It calculates
+ *  the number of bits required for the encoded stream of data.
+ *
+ ******************************************************************************/
+
+/*Includes*/
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+
+/*global arrays*/
+const SINT16 sbc_enc_as16Offset4[4][4] = {  {-1, 0, 0, 0}, {-2, 0, 0, 1},
+                                    {-2, 0, 0, 1}, {-2, 0, 0, 1} };
+const SINT16 sbc_enc_as16Offset8[4][8] = {  {-2, 0, 0, 0, 0, 0, 0, 1},
+                                    {-3, 0, 0, 0, 0, 0, 1, 2},
+                                    {-4, 0, 0, 0, 0, 0, 1, 2},
+                                    {-4, 0, 0, 0, 0, 0, 1, 2} };
+
+/****************************************************************************
+* BitAlloc - Calculates the required number of bits for the given scale factor
+* and the number of subbands.
+*
+* RETURNS : N/A
+*/
+
+void sbc_enc_bit_alloc_mono(SBC_ENC_PARAMS *pstrCodecParams)
+{
+    SINT32 s32MaxBitNeed;   /*to store the max bits needed per sb*/
+    SINT32 s32BitCount;     /*the used number of bits*/
+    SINT32 s32SliceCount;   /*to store hwo many slices can be put in bitpool*/
+    SINT32 s32BitSlice;     /*number of bitslices in bitpool*/
+    SINT32 s32Sb;           /*counter for sub-band*/
+    SINT32 s32Ch;           /*counter for channel*/
+    SINT16 *ps16BitNeed;    /*temp memory to store required number of bits*/
+    SINT32 s32Loudness;     /*used in Loudness calculation*/
+    SINT16 *ps16GenBufPtr;
+    SINT16 *ps16GenArrPtr;
+    SINT16 *ps16GenTabPtr;
+    SINT32  s32NumOfSubBands = pstrCodecParams->s16NumOfSubBands;
+
+    ps16BitNeed = pstrCodecParams->s16ScartchMemForBitAlloc;
+
+    for (s32Ch = 0; s32Ch < pstrCodecParams->s16NumOfChannels; s32Ch++)
+    {
+        ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        ps16GenArrPtr = pstrCodecParams->as16Bits+s32Ch*SBC_MAX_NUM_OF_SUBBANDS;
+
+        /* bitneed values are derived from scale factor */
+        if (pstrCodecParams->s16AllocationMethod == SBC_SNR)
+        {
+            ps16BitNeed = pstrCodecParams->as16ScaleFactor;
+            ps16GenBufPtr = ps16BitNeed + s32Ch * s32NumOfSubBands;
+        }
+        else
+        {
+            ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+            if(s32NumOfSubBands == 4)
+            {
+                ps16GenTabPtr = (SINT16 *)
+                    sbc_enc_as16Offset4[pstrCodecParams->s16SamplingFreq];
+            }
+            else
+            {
+                ps16GenTabPtr = (SINT16 *)
+                    sbc_enc_as16Offset8[pstrCodecParams->s16SamplingFreq];
+            }
+            for(s32Sb=0; s32Sb<s32NumOfSubBands; s32Sb++)
+            {
+                if(pstrCodecParams->as16ScaleFactor[s32Ch*s32NumOfSubBands+s32Sb] == 0)
+                    *(ps16GenBufPtr) = -5;
+                else
+                {
+                    s32Loudness =
+                        (SINT32)(pstrCodecParams->as16ScaleFactor[s32Ch*s32NumOfSubBands+s32Sb]
+                                                            - *ps16GenTabPtr);
+                    if(s32Loudness > 0)
+                        *(ps16GenBufPtr) = (SINT16)(s32Loudness >>1);
+                    else
+                        *(ps16GenBufPtr) = (SINT16)s32Loudness;
+                }
+                ps16GenBufPtr++;
+                ps16GenTabPtr++;
+            }
+
+        }
+
+        /* max bitneed index is searched*/
+        s32MaxBitNeed = 0;
+        ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        for(s32Sb=0; s32Sb<s32NumOfSubBands; s32Sb++)
+        {
+            if( *(ps16GenBufPtr) > s32MaxBitNeed)
+                s32MaxBitNeed = *(ps16GenBufPtr);
+
+            ps16GenBufPtr++;
+        }
+        ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        /*iterative process to find hwo many bitslices fit into the bitpool*/
+        s32BitSlice = s32MaxBitNeed + 1;
+        s32BitCount = pstrCodecParams->s16BitPool;
+        s32SliceCount = 0;
+        do
+        {
+            s32BitSlice --;
+            s32BitCount -= s32SliceCount;
+            s32SliceCount = 0;
+
+            for(s32Sb=0; s32Sb<s32NumOfSubBands; s32Sb++)
+            {
+                if( (((*ps16GenBufPtr-s32BitSlice)< 16) && (*ps16GenBufPtr-s32BitSlice) >= 1))
+                {
+                    if((*ps16GenBufPtr-s32BitSlice) == 1)
+                        s32SliceCount+=2;
+                    else
+                        s32SliceCount++;
+                }
+                ps16GenBufPtr++;
+
+            }/*end of for*/
+            ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        }while(s32BitCount-s32SliceCount>0);
+
+        if(s32BitCount == 0)
+        {
+            s32BitCount -= s32SliceCount;
+            s32BitSlice --;
+        }
+
+        /*Bits are distributed until the last bitslice is reached*/
+        ps16GenArrPtr = pstrCodecParams->as16Bits+s32Ch*s32NumOfSubBands;
+        ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        for(s32Sb=0; s32Sb<s32NumOfSubBands; s32Sb++)
+        {
+            if(*(ps16GenBufPtr) < s32BitSlice+2)
+                *(ps16GenArrPtr) = 0;
+            else
+                *(ps16GenArrPtr) = ((*(ps16GenBufPtr)-s32BitSlice)<16) ?
+                    (SINT16)(*(ps16GenBufPtr)-s32BitSlice) : 16;
+
+            ps16GenBufPtr++;
+            ps16GenArrPtr++;
+        }
+        ps16GenArrPtr = pstrCodecParams->as16Bits+s32Ch*s32NumOfSubBands;
+        ps16GenBufPtr = ps16BitNeed + s32Ch*s32NumOfSubBands;
+        /*the remaining bits are allocated starting at subband 0*/
+        s32Sb=0;
+        while( (s32BitCount > 0) && (s32Sb < s32NumOfSubBands) )
+        {
+            if( (*(ps16GenArrPtr) >= 2) && (*(ps16GenArrPtr) < 16) )
+            {
+                (*(ps16GenArrPtr))++;
+                s32BitCount--;
+            }
+            else if( (*(ps16GenBufPtr) == s32BitSlice+1) &&
+                (s32BitCount > 1) )
+            {
+                *(ps16GenArrPtr) = 2;
+                s32BitCount -= 2;
+            }
+            s32Sb++;
+            ps16GenArrPtr++;
+            ps16GenBufPtr++;
+        }
+        ps16GenArrPtr = pstrCodecParams->as16Bits+s32Ch*s32NumOfSubBands;
+
+
+        s32Sb=0;
+        while( (s32BitCount > 0) && (s32Sb < s32NumOfSubBands) )
+        {
+            if( *(ps16GenArrPtr) < 16)
+            {
+                (*(ps16GenArrPtr))++;
+                s32BitCount--;
+            }
+            s32Sb++;
+            ps16GenArrPtr++;
+        }
+    }
+}
+/*End of BitAlloc() function*/
diff --git a/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_ste.c b/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_ste.c
new file mode 100644
index 0000000..75d1630
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_ste.c
@@ -0,0 +1,212 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the code for bit allocation algorithm. It calculates
+ *  the number of bits required for the encoded stream of data.
+ *
+ ******************************************************************************/
+
+/*Includes*/
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+
+/*global arrays*/
+extern const SINT16 sbc_enc_as16Offset4[4][4];
+extern const SINT16 sbc_enc_as16Offset8[4][8];
+
+/****************************************************************************
+* BitAlloc - Calculates the required number of bits for the given scale factor
+* and the number of subbands.
+*
+* RETURNS : N/A
+*/
+
+void sbc_enc_bit_alloc_ste(SBC_ENC_PARAMS *pstrCodecParams)
+{
+	/* CAUTIOM -> mips optim for arm 32 require to use SINT32 instead of SINT16 */
+	/* Do not change variable type or name */
+    SINT32 s32MaxBitNeed;   /*to store the max bits needed per sb*/
+    SINT32 s32BitCount;     /*the used number of bits*/
+    SINT32 s32SliceCount;   /*to store hwo many slices can be put in bitpool*/
+    SINT32 s32BitSlice;     /*number of bitslices in bitpool*/
+    SINT32 s32Sb;           /*counter for sub-band*/
+    SINT32 s32Ch;           /*counter for channel*/
+    SINT16 *ps16BitNeed;    /*temp memory to store required number of bits*/
+    SINT32 s32Loudness;     /*used in Loudness calculation*/
+    SINT16 *ps16GenBufPtr,*pas16ScaleFactor;
+    SINT16 *ps16GenArrPtr;
+    SINT16 *ps16GenTabPtr;
+    SINT32  s32NumOfSubBands = pstrCodecParams->s16NumOfSubBands;
+    SINT32  s32BitPool       = pstrCodecParams->s16BitPool;
+
+    /* bitneed values are derived from scale factor */
+    if (pstrCodecParams->s16AllocationMethod == SBC_SNR)
+    {
+        ps16BitNeed   = pstrCodecParams->as16ScaleFactor;
+        s32MaxBitNeed = pstrCodecParams->s16MaxBitNeed;
+    }
+    else
+    {
+        ps16BitNeed   = pstrCodecParams->s16ScartchMemForBitAlloc;
+        pas16ScaleFactor=pstrCodecParams->as16ScaleFactor;
+        s32MaxBitNeed = 0;
+        ps16GenBufPtr = ps16BitNeed;
+        for (s32Ch = 0; s32Ch < 2; s32Ch++)
+        {
+            if (s32NumOfSubBands == 4)
+            {
+                ps16GenTabPtr = (SINT16 *)sbc_enc_as16Offset4[pstrCodecParams->s16SamplingFreq];
+            }
+            else
+            {
+                ps16GenTabPtr = (SINT16 *)sbc_enc_as16Offset8[pstrCodecParams->s16SamplingFreq];
+            }
+
+            for (s32Sb = 0; s32Sb < s32NumOfSubBands; s32Sb++)
+            {
+                if (*pas16ScaleFactor == 0)
+                    *ps16GenBufPtr = -5;
+                else
+                {
+                    s32Loudness = (SINT32)(*pas16ScaleFactor - *ps16GenTabPtr);
+
+                    if (s32Loudness > 0)
+                        *ps16GenBufPtr = (SINT16)(s32Loudness >> 1);
+                    else
+                        *ps16GenBufPtr = (SINT16)s32Loudness;
+                }
+
+                if (*ps16GenBufPtr > s32MaxBitNeed)
+                    s32MaxBitNeed = *ps16GenBufPtr;
+                pas16ScaleFactor++;
+                ps16GenBufPtr++;
+                ps16GenTabPtr++;
+            }
+        }
+    }
+
+    /* iterative process to find out hwo many bitslices fit into the bitpool */
+    s32BitSlice = s32MaxBitNeed + 1;
+    s32BitCount = s32BitPool;
+    s32SliceCount = 0;
+    do
+    {
+        s32BitSlice --;
+        s32BitCount -= s32SliceCount;
+        s32SliceCount = 0;
+        ps16GenBufPtr = ps16BitNeed;
+
+        for (s32Sb = 0; s32Sb < 2*s32NumOfSubBands; s32Sb++)
+        {
+            if ( (*ps16GenBufPtr >= s32BitSlice + 1) && (*ps16GenBufPtr < s32BitSlice + 16) )
+            {
+                if (*(ps16GenBufPtr) == s32BitSlice+1)
+                    s32SliceCount += 2;
+                else
+                    s32SliceCount++;
+            }
+            ps16GenBufPtr++;
+        }
+    } while (s32BitCount-s32SliceCount>0);
+
+    if (s32BitCount-s32SliceCount == 0)
+    {
+        s32BitCount -= s32SliceCount;
+        s32BitSlice --;
+    }
+
+    /* Bits are distributed until the last bitslice is reached */
+    ps16GenBufPtr = ps16BitNeed;
+    ps16GenArrPtr = pstrCodecParams->as16Bits;
+    for (s32Ch = 0; s32Ch < 2; s32Ch++)
+    {
+        for (s32Sb = 0; s32Sb < s32NumOfSubBands; s32Sb++)
+        {
+            if (*ps16GenBufPtr < s32BitSlice+2)
+                *ps16GenArrPtr = 0;
+            else
+                *ps16GenArrPtr = ((*(ps16GenBufPtr)-s32BitSlice) < 16) ?
+                                        (SINT16)(*(ps16GenBufPtr)-s32BitSlice):16;
+            ps16GenBufPtr++;
+            ps16GenArrPtr++;
+        }
+    }
+
+    /* the remaining bits are allocated starting at subband 0 */
+    s32Ch=0;
+    s32Sb=0;
+    ps16GenBufPtr = ps16BitNeed;
+    ps16GenArrPtr -= 2*s32NumOfSubBands;
+
+    while ( (s32BitCount > 0) && (s32Sb < s32NumOfSubBands) )
+    {
+        if ( (*(ps16GenArrPtr) >= 2) && (*(ps16GenArrPtr) < 16) )
+        {
+            (*(ps16GenArrPtr))++;
+            s32BitCount--;
+        }
+        else if ((*ps16GenBufPtr == s32BitSlice+1) && (s32BitCount > 1))
+        {
+            *(ps16GenArrPtr) = 2;
+            s32BitCount -= 2;
+        }
+        if(s32Ch == 1)
+        {
+            s32Ch = 0;
+            s32Sb++;
+            ps16GenBufPtr = ps16BitNeed+s32Sb;
+            ps16GenArrPtr = pstrCodecParams->as16Bits+s32Sb;
+
+        }
+        else
+        {
+            s32Ch =1;
+            ps16GenBufPtr = ps16BitNeed+s32NumOfSubBands+s32Sb;
+            ps16GenArrPtr = pstrCodecParams->as16Bits+s32NumOfSubBands+s32Sb;
+        }
+    }
+
+    s32Ch=0;
+    s32Sb=0;
+    ps16GenArrPtr = pstrCodecParams->as16Bits;
+
+    while ((s32BitCount >0) && (s32Sb < s32NumOfSubBands))
+    {
+        if(*(ps16GenArrPtr) < 16)
+        {
+            (*(ps16GenArrPtr))++;
+            s32BitCount--;
+        }
+        if (s32Ch == 1)
+        {
+            s32Ch = 0;
+            s32Sb++;
+            ps16GenArrPtr = pstrCodecParams->as16Bits+s32Sb;
+        }
+        else
+        {
+            s32Ch = 1;
+            ps16GenArrPtr = pstrCodecParams->as16Bits+s32NumOfSubBands+s32Sb;
+        }
+    }
+}
+
+/*End of BitAlloc() function*/
+
diff --git a/embdrv/sbc/encoder/srce/sbc_enc_coeffs.c b/embdrv/sbc/encoder/srce/sbc_enc_coeffs.c
new file mode 100644
index 0000000..2ecfbfd
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_enc_coeffs.c
@@ -0,0 +1,319 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the Windowing coeffs for synthesis filter
+ *
+ ******************************************************************************/
+
+#include "sbc_encoder.h"
+
+#if (SBC_ARM_ASM_OPT==FALSE && SBC_IPAQ_OPT==FALSE)
+#if (SBC_IS_64_MULT_IN_WINDOW_ACCU ==  FALSE)
+/*Window coeff for 4 sub band case*/
+const SINT16 gas32CoeffFor4SBs[] =
+{
+    (SINT16)((SINT32)0x00000000 >> 16),	(SINT16)0x00000000,
+	(SINT16)((SINT32)0x001194E6 >> 16),	(SINT16)0x001194E6,
+	(SINT16)((SINT32)0x0030E2D3 >> 16),	(SINT16)0x0030E2D3,
+	(SINT16)((SINT32)0x00599403 >> 16),	(SINT16)0x00599403,
+	(SINT16)((SINT32)0x007DBCC8 >> 16),	(SINT16)0x007DBCC8,
+	(SINT16)((SINT32)0x007F88E4 >> 16),	(SINT16)0x007F88E4,
+	(SINT16)((SINT32)0x003D239B >> 16),	(SINT16)0x003D239B,
+	(SINT16)((SINT32)0xFF9BB9D5 >> 16),	(SINT16)0xFF9BB9D5,
+
+	(SINT16)((SINT32)0x01659F45 >> 16),	(SINT16)0x01659F45,
+	(SINT16)((SINT32)0x029DBAA3 >> 16),	(SINT16)0x029DBAA3,
+	(SINT16)((SINT32)0x03B23341 >> 16),	(SINT16)0x03B23341,
+	(SINT16)((SINT32)0x041EEE40 >> 16),	(SINT16)0x041EEE40,
+	(SINT16)((SINT32)0x034FEE2C >> 16),	(SINT16)0x034FEE2C,
+	(SINT16)((SINT32)0x00C8F2BC >> 16),	(SINT16)0x00C8F2BC,
+	(SINT16)((SINT32)0xFC4F91D4 >> 16),	(SINT16)0xFC4F91D4,
+	(SINT16)((SINT32)0xF60FAF37 >> 16),	(SINT16)0xF60FAF37,
+
+	(SINT16)((SINT32)0x115B1ED2 >> 16),	(SINT16)0x115B1ED2,
+	(SINT16)((SINT32)0x18F55C90 >> 16),	(SINT16)0x18F55C90,
+	(SINT16)((SINT32)0x1F91CA46 >> 16),	(SINT16)0x1F91CA46,
+	(SINT16)((SINT32)0x2412F251 >> 16),	(SINT16)0x2412F251,
+	(SINT16)((SINT32)0x25AC1FF2 >> 16),	(SINT16)0x25AC1FF2,
+	(SINT16)((SINT32)0x2412F251 >> 16),	(SINT16)0x2412F251,
+	(SINT16)((SINT32)0x1F91CA46 >> 16),	(SINT16)0x1F91CA46,
+	(SINT16)((SINT32)0x18F55C90 >> 16),	(SINT16)0x18F55C90,
+
+	(SINT16)((SINT32)0xEEA4E12E >> 16),	(SINT16)0xEEA4E12E,
+	(SINT16)((SINT32)0xF60FAF37 >> 16),	(SINT16)0xF60FAF37,
+	(SINT16)((SINT32)0xFC4F91D4 >> 16),	(SINT16)0xFC4F91D4,
+	(SINT16)((SINT32)0x00C8F2BC >> 16),	(SINT16)0x00C8F2BC,
+	(SINT16)((SINT32)0x034FEE2C >> 16),	(SINT16)0x034FEE2C,
+	(SINT16)((SINT32)0x041EEE40 >> 16),	(SINT16)0x041EEE40,
+	(SINT16)((SINT32)0x03B23341 >> 16),	(SINT16)0x03B23341,
+	(SINT16)((SINT32)0x029DBAA3 >> 16),	(SINT16)0x029DBAA3,
+
+	(SINT16)((SINT32)0xFE9A60BB >> 16),	(SINT16)0xFE9A60BB,
+	(SINT16)((SINT32)0xFF9BB9D5 >> 16),	(SINT16)0xFF9BB9D5,
+	(SINT16)((SINT32)0x003D239B >> 16),	(SINT16)0x003D239B,
+	(SINT16)((SINT32)0x007F88E4 >> 16),	(SINT16)0x007F88E4,
+	(SINT16)((SINT32)0x007DBCC8 >> 16),	(SINT16)0x007DBCC8,
+	(SINT16)((SINT32)0x00599403 >> 16),	(SINT16)0x00599403,
+	(SINT16)((SINT32)0x0030E2D3 >> 16),	(SINT16)0x0030E2D3,
+	(SINT16)((SINT32)0x001194E6 >> 16),	(SINT16)0x001194E6
+};
+
+/*Window coeff for 8 sub band case*/
+const SINT16 gas32CoeffFor8SBs[] =
+{
+    (SINT16)((SINT32)0x00000000 >>16),	(SINT16)0x00000000,
+	(SINT16)((SINT32)0x00052173 >>16),	(SINT16)0x00052173,
+	(SINT16)((SINT32)0x000B3F71 >>16),	(SINT16)0x000B3F71,
+	(SINT16)((SINT32)0x00122C7D >>16),	(SINT16)0x00122C7D,
+	(SINT16)((SINT32)0x001AFF89 >>16),	(SINT16)0x001AFF89,
+	(SINT16)((SINT32)0x00255A62 >>16),	(SINT16)0x00255A62,
+	(SINT16)((SINT32)0x003060F4 >>16),	(SINT16)0x003060F4,
+	(SINT16)((SINT32)0x003A72E7 >>16),	(SINT16)0x003A72E7,
+
+	(SINT16)((SINT32)0x0041EC6A >>16),	(SINT16)0x0041EC6A,  /* 8 */
+	(SINT16)((SINT32)0x0044EF48 >>16),	(SINT16)0x0044EF48,
+	(SINT16)((SINT32)0x00415B75 >>16),	(SINT16)0x00415B75,
+	(SINT16)((SINT32)0x0034F8B6 >>16),	(SINT16)0x0034F8B6,
+	(SINT16)((SINT32)0x001D8FD2 >>16),	(SINT16)0x001D8FD2,
+	(SINT16)((SINT32)0xFFFA2413 >>16),	(SINT16)0xFFFA2413,
+	(SINT16)((SINT32)0xFFC9F10E >>16),	(SINT16)0xFFC9F10E,
+	(SINT16)((SINT32)0xFF8D6793 >>16),	(SINT16)0xFF8D6793,
+
+	(SINT16)((SINT32)0x00B97348 >>16),	(SINT16)0x00B97348,  /* 16 */
+	(SINT16)((SINT32)0x01071B96 >>16),	(SINT16)0x01071B96,
+	(SINT16)((SINT32)0x0156B3CA >>16),	(SINT16)0x0156B3CA,
+	(SINT16)((SINT32)0x01A1B38B >>16),	(SINT16)0x01A1B38B,
+	(SINT16)((SINT32)0x01E0224C >>16),	(SINT16)0x01E0224C,
+	(SINT16)((SINT32)0x0209291F >>16),	(SINT16)0x0209291F,
+	(SINT16)((SINT32)0x02138653 >>16),	(SINT16)0x02138653,
+	(SINT16)((SINT32)0x01F5F424 >>16),	(SINT16)0x01F5F424,
+
+	(SINT16)((SINT32)0x01A7ECEF >>16),	(SINT16)0x01A7ECEF, /* 24 */
+	(SINT16)((SINT32)0x01223EBA >>16),	(SINT16)0x01223EBA,
+	(SINT16)((SINT32)0x005FD0FF >>16),	(SINT16)0x005FD0FF,
+	(SINT16)((SINT32)0xFF5EEB73 >>16),	(SINT16)0xFF5EEB73,
+	(SINT16)((SINT32)0xFE20435D >>16),	(SINT16)0xFE20435D,
+	(SINT16)((SINT32)0xFCA86E7E >>16),	(SINT16)0xFCA86E7E,
+	(SINT16)((SINT32)0xFAFF95FC >>16),	(SINT16)0xFAFF95FC,
+	(SINT16)((SINT32)0xF9312891 >>16),	(SINT16)0xF9312891,
+
+	(SINT16)((SINT32)0x08B4307A >>16),	(SINT16)0x08B4307A, /* 32 */
+	(SINT16)((SINT32)0x0A9F3E9A >>16),	(SINT16)0x0A9F3E9A,
+	(SINT16)((SINT32)0x0C7D59B6 >>16),	(SINT16)0x0C7D59B6,
+	(SINT16)((SINT32)0x0E3BB16F >>16),	(SINT16)0x0E3BB16F,
+	(SINT16)((SINT32)0x0FC721F9 >>16),	(SINT16)0x0FC721F9,
+	(SINT16)((SINT32)0x110ECEF0 >>16),	(SINT16)0x110ECEF0,
+	(SINT16)((SINT32)0x120435FA >>16),	(SINT16)0x120435FA,
+	(SINT16)((SINT32)0x129C226F >>16),	(SINT16)0x129C226F,
+
+	(SINT16)((SINT32)0x12CF6C75 >>16),	(SINT16)0x12CF6C75, /* 40 */
+	(SINT16)((SINT32)0x129C226F >>16),	(SINT16)0x129C226F,
+	(SINT16)((SINT32)0x120435FA >>16),	(SINT16)0x120435FA,
+	(SINT16)((SINT32)0x110ECEF0 >>16),	(SINT16)0x110ECEF0,
+	(SINT16)((SINT32)0x0FC721F9 >>16),	(SINT16)0x0FC721F9,
+	(SINT16)((SINT32)0x0E3BB16F >>16),	(SINT16)0x0E3BB16F,
+	(SINT16)((SINT32)0x0C7D59B6 >>16),	(SINT16)0x0C7D59B6,
+	(SINT16)((SINT32)0x0A9F3E9A >>16),	(SINT16)0x0A9F3E9A,
+
+	(SINT16)((SINT32)0xF74BCF86 >>16),	(SINT16)0xF74BCF86, /* 48 */
+	(SINT16)((SINT32)0xF9312891 >>16),	(SINT16)0xF9312891,
+	(SINT16)((SINT32)0xFAFF95FC >>16),	(SINT16)0xFAFF95FC,
+	(SINT16)((SINT32)0xFCA86E7E >>16),	(SINT16)0xFCA86E7E,
+	(SINT16)((SINT32)0xFE20435D >>16),	(SINT16)0xFE20435D,
+	(SINT16)((SINT32)0xFF5EEB73 >>16),	(SINT16)0xFF5EEB73,
+	(SINT16)((SINT32)0x005FD0FF >>16),	(SINT16)0x005FD0FF,
+	(SINT16)((SINT32)0x01223EBA >>16),	(SINT16)0x01223EBA,
+
+	(SINT16)((SINT32)0x01A7ECEF >>16),	(SINT16)0x01A7ECEF, /* 56 */
+	(SINT16)((SINT32)0x01F5F424 >>16),	(SINT16)0x01F5F424,
+	(SINT16)((SINT32)0x02138653 >>16),	(SINT16)0x02138653,
+	(SINT16)((SINT32)0x0209291F >>16),	(SINT16)0x0209291F,
+	(SINT16)((SINT32)0x01E0224C >>16),	(SINT16)0x01E0224C,
+	(SINT16)((SINT32)0x01A1B38B >>16),	(SINT16)0x01A1B38B,
+	(SINT16)((SINT32)0x0156B3CA >>16),	(SINT16)0x0156B3CA,
+	(SINT16)((SINT32)0x01071B96 >>16),	(SINT16)0x01071B96,
+
+	(SINT16)((SINT32)0xFF468CB8 >>16),	(SINT16)0xFF468CB8, /* 64 */
+	(SINT16)((SINT32)0xFF8D6793 >>16),	(SINT16)0xFF8D6793,
+	(SINT16)((SINT32)0xFFC9F10E >>16),	(SINT16)0xFFC9F10E,
+	(SINT16)((SINT32)0xFFFA2413 >>16),	(SINT16)0xFFFA2413,
+	(SINT16)((SINT32)0x001D8FD2 >>16),	(SINT16)0x001D8FD2,
+	(SINT16)((SINT32)0x0034F8B6 >>16),	(SINT16)0x0034F8B6,
+	(SINT16)((SINT32)0x00415B75 >>16),	(SINT16)0x00415B75,
+	(SINT16)((SINT32)0x0044EF48 >>16),	(SINT16)0x0044EF48,
+
+	(SINT16)((SINT32)0x0041EC6A >>16),	(SINT16)0x0041EC6A, /* 72 */
+	(SINT16)((SINT32)0x003A72E7 >>16),	(SINT16)0x003A72E7,
+	(SINT16)((SINT32)0x003060F4 >>16),	(SINT16)0x003060F4,
+	(SINT16)((SINT32)0x00255A62 >>16),	(SINT16)0x00255A62,
+	(SINT16)((SINT32)0x001AFF89 >>16),	(SINT16)0x001AFF89,
+	(SINT16)((SINT32)0x00122C7D >>16),	(SINT16)0x00122C7D,
+	(SINT16)((SINT32)0x000B3F71 >>16),	(SINT16)0x000B3F71,
+	(SINT16)((SINT32)0x00052173 >>16),	(SINT16)0x00052173
+};
+
+#else
+
+/*Window coeff for 4 sub band case*/
+const SINT32 gas32CoeffFor4SBs[] =
+{
+    (SINT32)0x00000000,
+	(SINT32)0x001194E6,
+	(SINT32)0x0030E2D3,
+	(SINT32)0x00599403,
+	(SINT32)0x007DBCC8,
+	(SINT32)0x007F88E4,
+	(SINT32)0x003D239B,
+	(SINT32)0xFF9BB9D5,
+
+	(SINT32)0x01659F45,
+	(SINT32)0x029DBAA3,
+	(SINT32)0x03B23341,
+	(SINT32)0x041EEE40,
+	(SINT32)0x034FEE2C,
+	(SINT32)0x00C8F2BC,
+	(SINT32)0xFC4F91D4,
+	(SINT32)0xF60FAF37,
+
+	(SINT32)0x115B1ED2,
+	(SINT32)0x18F55C90,
+	(SINT32)0x1F91CA46,
+	(SINT32)0x2412F251,
+	(SINT32)0x25AC1FF2,
+	(SINT32)0x2412F251,
+	(SINT32)0x1F91CA46,
+	(SINT32)0x18F55C90,
+
+	(SINT32)0xEEA4E12E,
+	(SINT32)0xF60FAF37,
+	(SINT32)0xFC4F91D4,
+	(SINT32)0x00C8F2BC,
+	(SINT32)0x034FEE2C,
+	(SINT32)0x041EEE40,
+	(SINT32)0x03B23341,
+	(SINT32)0x029DBAA3,
+
+	(SINT32)0xFE9A60BB,
+	(SINT32)0xFF9BB9D5,
+	(SINT32)0x003D239B,
+	(SINT32)0x007F88E4,
+	(SINT32)0x007DBCC8,
+	(SINT32)0x00599403,
+	(SINT32)0x0030E2D3,
+	(SINT32)0x001194E6
+};
+
+/*Window coeff for 8 sub band case*/
+const SINT32 gas32CoeffFor8SBs[] =
+{
+    (SINT32)0x00000000,
+	(SINT32)0x00052173,
+	(SINT32)0x000B3F71,
+	(SINT32)0x00122C7D,
+	(SINT32)0x001AFF89,
+	(SINT32)0x00255A62,
+	(SINT32)0x003060F4,
+	(SINT32)0x003A72E7,
+
+	(SINT32)0x0041EC6A,  /* 8 */
+	(SINT32)0x0044EF48,
+	(SINT32)0x00415B75,
+	(SINT32)0x0034F8B6,
+	(SINT32)0x001D8FD2,
+	(SINT32)0xFFFA2413,
+	(SINT32)0xFFC9F10E,
+	(SINT32)0xFF8D6793,
+
+	(SINT32)0x00B97348,  /* 16 */
+	(SINT32)0x01071B96,
+	(SINT32)0x0156B3CA,
+	(SINT32)0x01A1B38B,
+	(SINT32)0x01E0224C,
+	(SINT32)0x0209291F,
+	(SINT32)0x02138653,
+	(SINT32)0x01F5F424,
+
+	(SINT32)0x01A7ECEF, /* 24 */
+	(SINT32)0x01223EBA,
+	(SINT32)0x005FD0FF,
+	(SINT32)0xFF5EEB73,
+	(SINT32)0xFE20435D,
+	(SINT32)0xFCA86E7E,
+	(SINT32)0xFAFF95FC,
+	(SINT32)0xF9312891,
+
+	(SINT32)0x08B4307A, /* 32 */
+	(SINT32)0x0A9F3E9A,
+	(SINT32)0x0C7D59B6,
+	(SINT32)0x0E3BB16F,
+	(SINT32)0x0FC721F9,
+	(SINT32)0x110ECEF0,
+	(SINT32)0x120435FA,
+	(SINT32)0x129C226F,
+
+	(SINT32)0x12CF6C75, /* 40 */
+	(SINT32)0x129C226F,
+	(SINT32)0x120435FA,
+	(SINT32)0x110ECEF0,
+	(SINT32)0x0FC721F9,
+	(SINT32)0x0E3BB16F,
+	(SINT32)0x0C7D59B6,
+	(SINT32)0x0A9F3E9A,
+
+	(SINT32)0xF74BCF86, /* 48 */
+	(SINT32)0xF9312891,
+	(SINT32)0xFAFF95FC,
+	(SINT32)0xFCA86E7E,
+	(SINT32)0xFE20435D,
+	(SINT32)0xFF5EEB73,
+	(SINT32)0x005FD0FF,
+	(SINT32)0x01223EBA,
+
+	(SINT32)0x01A7ECEF, /* 56 */
+	(SINT32)0x01F5F424,
+	(SINT32)0x02138653,
+	(SINT32)0x0209291F,
+	(SINT32)0x01E0224C,
+	(SINT32)0x01A1B38B,
+	(SINT32)0x0156B3CA,
+	(SINT32)0x01071B96,
+
+	(SINT32)0xFF468CB8, /* 64 */
+	(SINT32)0xFF8D6793,
+	(SINT32)0xFFC9F10E,
+	(SINT32)0xFFFA2413,
+	(SINT32)0x001D8FD2,
+	(SINT32)0x0034F8B6,
+	(SINT32)0x00415B75,
+	(SINT32)0x0044EF48,
+
+	(SINT32)0x0041EC6A, /* 72 */
+	(SINT32)0x003A72E7,
+	(SINT32)0x003060F4,
+	(SINT32)0x00255A62,
+	(SINT32)0x001AFF89,
+	(SINT32)0x00122C7D,
+	(SINT32)0x000B3F71,
+	(SINT32)0x00052173
+};
+
+#endif
+#endif
+
diff --git a/embdrv/sbc/encoder/srce/sbc_encoder.c b/embdrv/sbc/encoder/srce/sbc_encoder.c
new file mode 100644
index 0000000..f111ed0
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_encoder.c
@@ -0,0 +1,401 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  contains code for encoder flow and initalization of encoder
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+
+SINT16 EncMaxShiftCounter;
+
+/*************************************************************************************************
+ * SBC encoder scramble code
+ * Purpose: to tie the SBC code with BTE/mobile stack code,
+ *          especially for the case when the SBC is ported into a third-party Multimedia chip
+ *
+ * Algorithm:
+ *  init process: all counters reset to 0,
+ *                calculate base_index: (6 + s16NumOfChannels*s16NumOfSubBands/2)
+ *    scramble side:    the init process happens every time SBC_Encoder_Init() is called.
+ *    descramble side:  it would be nice to know if he "init" process has happened.
+ *                      alter the SBC SYNC word 0x9C (1001 1100) to 0x8C (1000 1100).
+ *
+ *  scramble process:
+ *    The CRC byte:
+ *    Every SBC frame has a frame header.
+ *    The 1st byte is the sync word and the following 2 bytes are about the stream format.
+ *    They are supposed to be "constant" within a "song"
+ *    The 4th byte is the CRC byte. The CRC byte is bound to be random.
+ *    Derive 2 items from the CRC byte; one is the "use" bit, the other is the "index".
+ *
+ *    SBC keeps 2 sets of "use" & "index"; derived the current and the previous frame.
+ *
+ *    The "use" bit is any bit in SBC_PRTC_USE_MASK is set.
+ *    If set, SBC uses the "index" from the current frame.
+ *    If not set, SBC uses the "index" from the previous frame or 0.
+ *
+ *    index = (CRC & 0x3) + ((CRC & 0x30) >> 2) // 8 is the max index
+ *
+ *    if(index > 0)
+ *    {
+ *        p = &u8frame[base_index];
+ *        if((index&1)&&(u16PacketLength > (base_index+index*2)))
+ *        {
+ *            // odd index: swap 2 bytes
+ *            tmp = p[index];
+ *            p[index] = p[index*2];
+ *            p[index*2] = tmp;
+ *        }
+ *        else
+ *        {
+ *            // even index: shift by 3
+ *            tmp = (p[index] >> 5) + (p[index] << 3);
+ *            p[index] = tmp;
+ *        }
+ *    }
+ *    //else index is 0. The frame stays unaltered
+ *
+ */
+
+#define SBC_PRTC_CRC_IDX        3
+#define SBC_PRTC_USE_MASK       0x64
+#define SBC_PRTC_SYNC_MASK      0x10
+#define SBC_PRTC_CIDX           0
+#define SBC_PRTC_LIDX           1
+typedef struct
+{
+    UINT8   use;
+    UINT8   idx;
+} tSBC_FR_CB;
+
+typedef struct
+{
+    tSBC_FR_CB      fr[2];
+    UINT8           init;
+    UINT8           index;
+    UINT8           base;
+} tSBC_PRTC_CB;
+tSBC_PRTC_CB sbc_prtc_cb;
+
+#define SBC_PRTC_IDX(sc) (((sc) & 0x3) + (((sc) & 0x30) >> 2))
+#define SBC_PRTC_CHK_INIT(ar) {if(sbc_prtc_cb.init == 0){sbc_prtc_cb.init=1; ar[0] &= ~SBC_PRTC_SYNC_MASK;}}
+#define SBC_PRTC_C2L() {p_last=&sbc_prtc_cb.fr[SBC_PRTC_LIDX]; p_cur=&sbc_prtc_cb.fr[SBC_PRTC_CIDX]; \
+                        p_last->idx = p_cur->idx; p_last->use = p_cur->use;}
+#define SBC_PRTC_GETC(ar) {p_cur->use = ar[SBC_PRTC_CRC_IDX] & SBC_PRTC_USE_MASK; \
+                           p_cur->idx = SBC_PRTC_IDX(ar[SBC_PRTC_CRC_IDX]);}
+#define SBC_PRTC_CHK_CRC(ar) {SBC_PRTC_C2L();SBC_PRTC_GETC(ar);sbc_prtc_cb.index = (p_cur->use)?SBC_PRTC_CIDX:SBC_PRTC_LIDX;}
+#define SBC_PRTC_SCRMB(ar) {idx = sbc_prtc_cb.fr[sbc_prtc_cb.index].idx; \
+    if(idx > 0){if((idx&1)&&(pstrEncParams->u16PacketLength > (sbc_prtc_cb.base+(idx<<1)))) {tmp2=idx<<1; tmp=ar[idx];ar[idx]=ar[tmp2];ar[tmp2]=tmp;} \
+                else{tmp2=ar[idx]; tmp=(tmp2>>5)+(tmp2<<3);ar[idx]=(UINT8)tmp;}}}
+
+#if (SBC_JOINT_STE_INCLUDED == TRUE)
+SINT32   s32LRDiff[SBC_MAX_NUM_OF_BLOCKS]    = {0};
+SINT32   s32LRSum[SBC_MAX_NUM_OF_BLOCKS]     = {0};
+#endif
+
+void SBC_Encoder(SBC_ENC_PARAMS *pstrEncParams)
+{
+    SINT32 s32Ch;                               /* counter for ch*/
+    SINT32 s32Sb;                               /* counter for sub-band*/
+    UINT32 u32Count, maxBit = 0;                          /* loop count*/
+    SINT32 s32MaxValue;                         /* temp variable to store max value */
+
+    SINT16 *ps16ScfL;
+    SINT32 *SbBuffer;
+    SINT32 s32Blk;                              /* counter for block*/
+    SINT32  s32NumOfBlocks   = pstrEncParams->s16NumOfBlocks;
+#if (SBC_JOINT_STE_INCLUDED == TRUE)
+    SINT32 s32MaxValue2;
+    UINT32 u32CountSum,u32CountDiff;
+    SINT32 *pSum, *pDiff;
+#endif
+    UINT8  *pu8;
+    tSBC_FR_CB  *p_cur, *p_last;
+    UINT32       idx, tmp, tmp2;
+    register SINT32  s32NumOfSubBands = pstrEncParams->s16NumOfSubBands;
+
+    pstrEncParams->pu8NextPacket = pstrEncParams->pu8Packet;
+
+#if (SBC_NO_PCM_CPY_OPTION == TRUE)
+    pstrEncParams->ps16NextPcmBuffer = pstrEncParams->ps16PcmBuffer;
+#else
+    pstrEncParams->ps16NextPcmBuffer  = pstrEncParams->as16PcmBuffer;
+#endif
+    do
+    {
+        /* SBC ananlysis filter*/
+        if (s32NumOfSubBands == 4)
+            SbcAnalysisFilter4(pstrEncParams);
+        else
+            SbcAnalysisFilter8(pstrEncParams);
+
+        /* compute the scale factor, and save the max */
+        ps16ScfL = pstrEncParams->as16ScaleFactor;
+        s32Ch=pstrEncParams->s16NumOfChannels*s32NumOfSubBands;
+
+            pstrEncParams->ps16NextPcmBuffer+=s32Ch*s32NumOfBlocks; /* in case of multible sbc frame to encode update the pcm pointer */
+
+        for (s32Sb=0; s32Sb<s32Ch; s32Sb++)
+        {
+            SbBuffer=pstrEncParams->s32SbBuffer+s32Sb;
+            s32MaxValue=0;
+            for (s32Blk=s32NumOfBlocks;s32Blk>0;s32Blk--)
+            {
+                if (s32MaxValue<abs32(*SbBuffer))
+                    s32MaxValue=abs32(*SbBuffer);
+                SbBuffer+=s32Ch;
+            }
+
+            u32Count = (s32MaxValue > 0x800000) ? 9 : 0;
+
+            for ( ; u32Count < 15; u32Count++)
+            {
+                if (s32MaxValue <= (SINT32)(0x8000 << u32Count))
+                    break;
+            }
+            *ps16ScfL++ = (SINT16)u32Count;
+
+            if (u32Count > maxBit)
+                maxBit = u32Count;
+        }
+        /* In case of JS processing,check whether to use JS */
+#if (SBC_JOINT_STE_INCLUDED == TRUE)
+        if (pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO)
+        {
+            /* Calculate sum and differance  scale factors for making JS decision   */
+            ps16ScfL = pstrEncParams->as16ScaleFactor ;
+            /* calculate the scale factor of Joint stereo max sum and diff */
+            for (s32Sb = 0; s32Sb < s32NumOfSubBands-1; s32Sb++)
+            {
+                SbBuffer=pstrEncParams->s32SbBuffer+s32Sb;
+                s32MaxValue2=0;
+                s32MaxValue=0;
+                pSum       = s32LRSum;
+                pDiff      = s32LRDiff;
+                for (s32Blk=0;s32Blk<s32NumOfBlocks;s32Blk++)
+                {
+                    *pSum=(*SbBuffer+*(SbBuffer+s32NumOfSubBands))>>1;
+                    if (abs32(*pSum)>s32MaxValue)
+                        s32MaxValue=abs32(*pSum);
+                    pSum++;
+                    *pDiff=(*SbBuffer-*(SbBuffer+s32NumOfSubBands))>>1;
+                    if (abs32(*pDiff)>s32MaxValue2)
+                        s32MaxValue2=abs32(*pDiff);
+                    pDiff++;
+                    SbBuffer+=s32Ch;
+                }
+                u32Count = (s32MaxValue > 0x800000) ? 9 : 0;
+                for ( ; u32Count < 15; u32Count++)
+                {
+                    if (s32MaxValue <= (SINT32)(0x8000 << u32Count))
+                        break;
+                }
+                u32CountSum=u32Count;
+                u32Count = (s32MaxValue2 > 0x800000) ? 9 : 0;
+                for ( ; u32Count < 15; u32Count++)
+                {
+                    if (s32MaxValue2 <= (SINT32)(0x8000 << u32Count))
+                        break;
+                }
+                u32CountDiff=u32Count;
+                if ( (*ps16ScfL + *(ps16ScfL+s32NumOfSubBands)) > (SINT16)(u32CountSum + u32CountDiff) )
+                {
+
+                    if (u32CountSum > maxBit)
+                        maxBit = u32CountSum;
+
+                    if (u32CountDiff > maxBit)
+                        maxBit = u32CountDiff;
+
+                    *ps16ScfL = (SINT16)u32CountSum;
+                    *(ps16ScfL+s32NumOfSubBands) = (SINT16)u32CountDiff;
+
+                    SbBuffer=pstrEncParams->s32SbBuffer+s32Sb;
+                    pSum       = s32LRSum;
+                    pDiff      = s32LRDiff;
+
+                    for (s32Blk = 0; s32Blk < s32NumOfBlocks; s32Blk++)
+                    {
+                        *SbBuffer = *pSum;
+                        *(SbBuffer+s32NumOfSubBands) = *pDiff;
+
+                        SbBuffer += s32NumOfSubBands<<1;
+                        pSum++;
+                        pDiff++;
+                    }
+
+                    pstrEncParams->as16Join[s32Sb] = 1;
+                }
+                else
+                {
+                    pstrEncParams->as16Join[s32Sb] = 0;
+                }
+                ps16ScfL++;
+            }
+            pstrEncParams->as16Join[s32Sb] = 0;
+        }
+#endif
+
+        pstrEncParams->s16MaxBitNeed = (SINT16)maxBit;
+
+        /* bit allocation */
+        if ((pstrEncParams->s16ChannelMode == SBC_STEREO) || (pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO))
+            sbc_enc_bit_alloc_ste(pstrEncParams);
+        else
+            sbc_enc_bit_alloc_mono(pstrEncParams);
+
+        /* save the beginning of the frame. pu8NextPacket is modified in EncPacking() */
+        pu8 = pstrEncParams->pu8NextPacket;
+        /* Quantize the encoded audio */
+        EncPacking(pstrEncParams);
+
+        /* scramble the code */
+        SBC_PRTC_CHK_INIT(pu8);
+        SBC_PRTC_CHK_CRC(pu8);
+#if 0
+        if(pstrEncParams->u16PacketLength > ((sbc_prtc_cb.fr[sbc_prtc_cb.index].idx * 2) + sbc_prtc_cb.base))
+            printf("len: %d, idx: %d\n", pstrEncParams->u16PacketLength, sbc_prtc_cb.fr[sbc_prtc_cb.index].idx);
+        else
+            printf("len: %d, idx: %d!!!!\n", pstrEncParams->u16PacketLength, sbc_prtc_cb.fr[sbc_prtc_cb.index].idx);
+#endif
+        SBC_PRTC_SCRMB((&pu8[sbc_prtc_cb.base]));
+    }
+    while(--(pstrEncParams->u8NumPacketToEncode));
+
+    pstrEncParams->u8NumPacketToEncode = 1; /* default is one for retrocompatibility purpose */
+
+}
+
+/****************************************************************************
+* InitSbcAnalysisFilt - Initalizes the input data to 0
+*
+* RETURNS : N/A
+*/
+void SBC_Encoder_Init(SBC_ENC_PARAMS *pstrEncParams)
+{
+    UINT16 s16SamplingFreq; /*temp variable to store smpling freq*/
+    SINT16 s16Bitpool;      /*to store bit pool value*/
+    SINT16 s16BitRate;      /*to store bitrate*/
+    SINT16 s16FrameLen;     /*to store frame length*/
+    UINT16 HeaderParams;
+
+    pstrEncParams->u8NumPacketToEncode = 1; /* default is one for retrocompatibility purpose */
+
+    /* Required number of channels */
+    if (pstrEncParams->s16ChannelMode == SBC_MONO)
+        pstrEncParams->s16NumOfChannels = 1;
+    else
+        pstrEncParams->s16NumOfChannels = 2;
+
+    /* Bit pool calculation */
+    if (pstrEncParams->s16SamplingFreq == SBC_sf16000)
+        s16SamplingFreq = 16000;
+    else if (pstrEncParams->s16SamplingFreq == SBC_sf32000)
+        s16SamplingFreq = 32000;
+    else if (pstrEncParams->s16SamplingFreq == SBC_sf44100)
+        s16SamplingFreq = 44100;
+    else
+        s16SamplingFreq = 48000;
+
+    if ( (pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO)
+        ||  (pstrEncParams->s16ChannelMode == SBC_STEREO) )
+    {
+        s16Bitpool = (SINT16)( (pstrEncParams->u16BitRate *
+            pstrEncParams->s16NumOfSubBands * 1000 / s16SamplingFreq)
+            -( (32 + (4 * pstrEncParams->s16NumOfSubBands *
+            pstrEncParams->s16NumOfChannels)
+            + ( (pstrEncParams->s16ChannelMode - 2) *
+            pstrEncParams->s16NumOfSubBands )   )
+            / pstrEncParams->s16NumOfBlocks) );
+
+        s16FrameLen = 4 + (4*pstrEncParams->s16NumOfSubBands*
+            pstrEncParams->s16NumOfChannels)/8
+            + ( ((pstrEncParams->s16ChannelMode - 2) *
+            pstrEncParams->s16NumOfSubBands)
+            + (pstrEncParams->s16NumOfBlocks * s16Bitpool) ) / 8;
+
+        s16BitRate = (8 * s16FrameLen * s16SamplingFreq)
+            / (pstrEncParams->s16NumOfSubBands *
+            pstrEncParams->s16NumOfBlocks * 1000);
+
+        if (s16BitRate > pstrEncParams->u16BitRate)
+            s16Bitpool--;
+
+        if(pstrEncParams->s16NumOfSubBands == 8)
+            pstrEncParams->s16BitPool = (s16Bitpool > 255) ? 255 : s16Bitpool;
+        else
+            pstrEncParams->s16BitPool = (s16Bitpool > 128) ? 128 : s16Bitpool;
+    }
+    else
+    {
+        s16Bitpool = (SINT16)( ((pstrEncParams->s16NumOfSubBands *
+            pstrEncParams->u16BitRate * 1000)
+            / (s16SamplingFreq * pstrEncParams->s16NumOfChannels))
+            -( ( (32 / pstrEncParams->s16NumOfChannels) +
+            (4 * pstrEncParams->s16NumOfSubBands) )
+            /   pstrEncParams->s16NumOfBlocks ) );
+
+        pstrEncParams->s16BitPool = (s16Bitpool >
+            (16 * pstrEncParams->s16NumOfSubBands))
+            ? (16*pstrEncParams->s16NumOfSubBands) : s16Bitpool;
+    }
+
+    if (pstrEncParams->s16BitPool < 0)
+        pstrEncParams->s16BitPool = 0;
+    /* sampling freq */
+    HeaderParams = ((pstrEncParams->s16SamplingFreq & 3)<< 6);
+
+    /* number of blocks*/
+    HeaderParams |= (((pstrEncParams->s16NumOfBlocks -4) & 12) << 2);
+
+    /* channel mode: mono, dual...*/
+    HeaderParams |= ((pstrEncParams->s16ChannelMode & 3)<< 2);
+
+    /* Loudness or SNR */
+    HeaderParams |= ((pstrEncParams->s16AllocationMethod & 1)<< 1);
+    HeaderParams |= ((pstrEncParams->s16NumOfSubBands >> 3) & 1);  /*4 or 8*/
+    pstrEncParams->FrameHeader=HeaderParams;
+
+    if (pstrEncParams->s16NumOfSubBands==4)
+    {
+        if (pstrEncParams->s16NumOfChannels==1)
+            EncMaxShiftCounter=((ENC_VX_BUFFER_SIZE-4*10)>>2)<<2;
+        else
+            EncMaxShiftCounter=((ENC_VX_BUFFER_SIZE-4*10*2)>>3)<<2;
+    }
+    else
+    {
+        if (pstrEncParams->s16NumOfChannels==1)
+            EncMaxShiftCounter=((ENC_VX_BUFFER_SIZE-8*10)>>3)<<3;
+        else
+            EncMaxShiftCounter=((ENC_VX_BUFFER_SIZE-8*10*2)>>4)<<3;
+    }
+
+    APPL_TRACE_EVENT2("SBC_Encoder_Init : bitrate %d, bitpool %d",
+            pstrEncParams->u16BitRate, pstrEncParams->s16BitPool);
+
+    SbcAnalysisInit();
+
+    memset(&sbc_prtc_cb, 0, sizeof(tSBC_PRTC_CB));
+    sbc_prtc_cb.base = 6 + pstrEncParams->s16NumOfChannels*pstrEncParams->s16NumOfSubBands/2;
+}
diff --git a/embdrv/sbc/encoder/srce/sbc_packing.c b/embdrv/sbc/encoder/srce/sbc_packing.c
new file mode 100644
index 0000000..bdbefea
--- /dev/null
+++ b/embdrv/sbc/encoder/srce/sbc_packing.c
@@ -0,0 +1,274 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains code for packing the Encoded data into bit streams.
+ *
+ ******************************************************************************/
+
+#include "sbc_encoder.h"
+#include "sbc_enc_func_declare.h"
+
+#if (SBC_ARM_ASM_OPT==TRUE)
+#define Mult32(s32In1,s32In2,s32OutLow)                                                 \
+{                                                                                       \
+   __asm                                                                                \
+   {                                                                                    \
+        MUL s32OutLow,s32In1,s32In2;                                                    \
+    }                                                                                   \
+}
+#define Mult64(s32In1, s32In2, s32OutLow, s32OutHi)                                     \
+{                                                                                       \
+    __asm													        					\
+    {														    						\
+        SMULL s32OutLow,s32OutHi,s32In1,s32In2          	    						\
+    }														    						\
+}
+#else
+#define Mult32(s32In1,s32In2,s32OutLow) s32OutLow=(SINT32)s32In1*(SINT32)s32In2;
+#define Mult64(s32In1, s32In2, s32OutLow, s32OutHi)                                     \
+{                                                                                       \
+	s32OutLow   = ((SINT32)(UINT16)s32In1  * (UINT16)s32In2);                           \
+	s32TempVal2 = (SINT32)((s32In1 >> 16) * (UINT16)s32In2);                            \
+	s32Carry    = ( (((UINT32)(s32OutLow)>>16)&0xFFFF) +                                \
+										+ (s32TempVal2 & 0xFFFF) ) >> 16;               \
+	s32OutLow   += (s32TempVal2 << 16);                                                 \
+	s32OutHi     = (s32TempVal2 >> 16) + s32Carry;                                      \
+}
+#endif
+
+void EncPacking(SBC_ENC_PARAMS *pstrEncParams)
+{
+    UINT8       *pu8PacketPtr;                      /* packet ptr*/
+    UINT8 Temp;
+    SINT32      s32Blk;                             /* counter for block*/
+    SINT32      s32Ch;                              /* counter for channel*/
+    SINT32      s32Sb;                              /* counter for sub-band*/
+    SINT32 s32PresentBit;                      /* represents bit to be stored*/
+    /*SINT32 s32LoopCountI;                       loop counter*/
+    SINT32 s32LoopCountJ;                      /* loop counter*/
+    UINT32 u32QuantizedSbValue,u32QuantizedSbValue0; /* temp variable to store quantized sb val*/
+    SINT32 s32LoopCount;                       /* loop counter*/
+    UINT8 u8XoredVal;                         /* to store XORed value in CRC calculation*/
+    UINT8 u8CRC;                              /* to store CRC value*/
+    SINT16 *ps16GenPtr;
+    SINT32 s32NumOfBlocks;
+    SINT32 s32NumOfSubBands = pstrEncParams->s16NumOfSubBands;
+    SINT32 s32NumOfChannels = pstrEncParams->s16NumOfChannels;
+	UINT32 u32SfRaisedToPow2;	/*scale factor raised to power 2*/
+    SINT16 *ps16ScfPtr;
+    SINT32 *ps32SbPtr;
+	UINT16 u16Levels;	/*to store levels*/
+	SINT32 s32Temp1;	/*used in 64-bit multiplication*/
+	SINT32 s32Low;	/*used in 64-bit multiplication*/
+#if (SBC_IS_64_MULT_IN_QUANTIZER==TRUE)
+	SINT32 s32Hi1,s32Low1,s32Carry,s32TempVal2,s32Hi, s32Temp2;
+#endif
+
+    pu8PacketPtr    = pstrEncParams->pu8NextPacket;    /*Initialize the ptr*/
+    *pu8PacketPtr++ = (UINT8)0x9C;  /*Sync word*/
+    *pu8PacketPtr++=(UINT8)(pstrEncParams->FrameHeader);
+
+    *pu8PacketPtr = (UINT8)(pstrEncParams->s16BitPool & 0x00FF);
+    pu8PacketPtr += 2;  /*skip for CRC*/
+
+    /*here it indicate if it is byte boundary or nibble boundary*/
+    s32PresentBit = 8;
+    Temp=0;
+#if (SBC_JOINT_STE_INCLUDED == TRUE)
+    if (pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO)
+    {
+        /* pack join stero parameters */
+        for (s32Sb = 0; s32Sb < s32NumOfSubBands; s32Sb++)
+        {
+            Temp <<= 1;
+            Temp |= pstrEncParams->as16Join[s32Sb];
+        }
+
+        /* pack RFA */
+        if (s32NumOfSubBands == SUB_BANDS_4)
+        {
+            s32PresentBit = 4;
+        }
+        else
+        {
+            *(pu8PacketPtr++)=Temp;
+            Temp = 0;
+        }
+    }
+#endif
+
+    /* Pack Scale factor */
+    ps16GenPtr = pstrEncParams->as16ScaleFactor;
+    s32Sb=s32NumOfChannels*s32NumOfSubBands;
+    /*Temp=*pu8PacketPtr;*/
+    for (s32Ch = s32Sb; s32Ch >0; s32Ch--)
+    {
+        Temp<<= 4;
+        Temp |= *ps16GenPtr++;
+
+        if(s32PresentBit == 4)
+        {
+            s32PresentBit = 8;
+            *(pu8PacketPtr++)=Temp;
+            Temp = 0;
+        }
+        else
+        {
+            s32PresentBit = 4;
+        }
+    }
+
+    /* Pack samples */
+    ps32SbPtr   = pstrEncParams->s32SbBuffer;
+    /*Temp=*pu8PacketPtr;*/
+    s32NumOfBlocks= pstrEncParams->s16NumOfBlocks;
+    for (s32Blk = s32NumOfBlocks-1; s32Blk >=0; s32Blk--)
+    {
+        ps16GenPtr  = pstrEncParams->as16Bits;
+        ps16ScfPtr  = pstrEncParams->as16ScaleFactor;
+        for (s32Ch = s32Sb-1; s32Ch >= 0; s32Ch--)
+        {
+            s32LoopCount = *ps16GenPtr++;
+            if (s32LoopCount != 0)
+            {
+#if (SBC_IS_64_MULT_IN_QUANTIZER==TRUE)
+                /* finding level from reconstruction part of decoder */
+                u32SfRaisedToPow2 = ((UINT32)1 << ((*ps16ScfPtr)+1));
+                u16Levels = (UINT16)(((UINT32)1 << s32LoopCount) - 1);
+
+                /* quantizer */
+                s32Temp1 = (*ps32SbPtr >> 2) + (u32SfRaisedToPow2 << 12);
+                s32Temp2 = u16Levels;
+
+                Mult64 (s32Temp1, s32Temp2, s32Low, s32Hi);
+
+                s32Low1   = s32Low >> ((*ps16ScfPtr)+2);
+                s32Low1  &= ((UINT32)1 << (32 - ((*ps16ScfPtr)+2))) - 1;
+                s32Hi1    = s32Hi << (32 - ((*ps16ScfPtr) +2));
+
+                u32QuantizedSbValue0 = (UINT16)((s32Low1 | s32Hi1) >> 12);
+#else
+                /* finding level from reconstruction part of decoder */
+                u32SfRaisedToPow2 = ((UINT32)1 << *ps16ScfPtr);
+                u16Levels = (UINT16)(((UINT32)1 << s32LoopCount)-1);
+
+                /* quantizer */
+                s32Temp1 = (*ps32SbPtr >> 15) + u32SfRaisedToPow2;
+                Mult32(s32Temp1,u16Levels,s32Low);
+                s32Low>>= (*ps16ScfPtr+1);
+                u32QuantizedSbValue0 = (UINT16)s32Low;
+#endif
+                /*store the number of bits required and the quantized s32Sb
+                sample to ease the coding*/
+                u32QuantizedSbValue = u32QuantizedSbValue0;
+
+                if(s32PresentBit >= s32LoopCount)
+                {
+                    Temp <<= s32LoopCount;
+                    Temp |= u32QuantizedSbValue;
+                    s32PresentBit -= s32LoopCount;
+                }
+                else
+                {
+                    while (s32PresentBit < s32LoopCount)
+                    {
+                        s32LoopCount -= s32PresentBit;
+                        u32QuantizedSbValue >>= s32LoopCount;
+
+                        /*remove the unwanted msbs*/
+                        /*u32QuantizedSbValue <<= 16 - s32PresentBit;
+                        u32QuantizedSbValue >>= 16 - s32PresentBit;*/
+
+                        Temp <<= s32PresentBit;
+
+                        Temp |= u32QuantizedSbValue ;
+                        /*restore the original*/
+                        u32QuantizedSbValue=u32QuantizedSbValue0;
+
+                        *(pu8PacketPtr++)=Temp;
+                        Temp = 0;
+                        s32PresentBit = 8;
+                    }
+                    Temp <<= s32LoopCount;
+
+                    /* remove the unwanted msbs */
+                    /*u32QuantizedSbValue <<= 16 - s32LoopCount;
+                    u32QuantizedSbValue >>= 16 - s32LoopCount;*/
+
+                    Temp |= u32QuantizedSbValue;
+
+                    s32PresentBit -= s32LoopCount;
+                }
+            }
+            ps16ScfPtr++;
+            ps32SbPtr++;
+        }
+    }
+
+    Temp <<= s32PresentBit;
+    *pu8PacketPtr=Temp;
+    pstrEncParams->u16PacketLength=pu8PacketPtr-pstrEncParams->pu8NextPacket+1;
+    /*find CRC*/
+    pu8PacketPtr = pstrEncParams->pu8NextPacket+1;    /*Initialize the ptr*/
+    u8CRC = 0x0F;
+    s32LoopCount = s32Sb >> 1;
+
+    /*
+    The loops is run from the start of the packet till the scale factor
+    parameters. In case of JS, 'join' parameter is included in the packet
+    so that many more bytes are included in CRC calculation.
+    */
+    Temp=*pu8PacketPtr;
+    for (s32Ch=1; s32Ch < (s32LoopCount+4); s32Ch++)
+    {
+        /* skip sync word and CRC bytes */
+        if (s32Ch != 3)
+        {
+            for (s32LoopCountJ=7; s32LoopCountJ>=0; s32LoopCountJ--)
+            {
+                u8XoredVal = ((u8CRC >> 7) & 0x01) ^((Temp >> s32LoopCountJ) & 0x01);
+                u8CRC <<= 1;
+                u8CRC ^= (u8XoredVal * 0x1D);
+                u8CRC &= 0xFF;
+            }
+        }
+        Temp=*(++pu8PacketPtr);
+    }
+
+    if (pstrEncParams->s16ChannelMode == SBC_JOINT_STEREO)
+    {
+        for (s32LoopCountJ = 7; s32LoopCountJ >= (8 - s32NumOfSubBands); s32LoopCountJ--)
+        {
+            u8XoredVal = ((u8CRC >> 7) & 0x01) ^((Temp >> s32LoopCountJ) & 0x01);
+            u8CRC <<= 1;
+            u8CRC ^= (u8XoredVal * 0x1D);
+            u8CRC &= 0xFF;
+        }
+    }
+
+    /* CRC calculation ends here */
+
+    /* store CRC in packet */
+    pu8PacketPtr = pstrEncParams->pu8NextPacket;    /*Initialize the ptr*/
+    pu8PacketPtr += 3;
+    *pu8PacketPtr = u8CRC;
+    pstrEncParams->pu8NextPacket+=pstrEncParams->u16PacketLength;  /* move the pointer to the end in case there is more than one frame to encode */
+}
+
diff --git a/gki/Android.mk b/gki/Android.mk
new file mode 100644
index 0000000..0ece25b
--- /dev/null
+++ b/gki/Android.mk
@@ -0,0 +1,35 @@
+ifneq ($(TARGET_SIMULATOR),true)
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_C_INCLUDES:= $(LOCAL_PATH)/common \
+                   $(LOCAL_PATH)/ulinux \
+                   $(LOCAL_PATH)/../include \
+                   $(LOCAL_PATH)/../stack/include \
+                   $(LOCAL_PATH)/../utils/include \
+                   $(bdroid_C_INCLUDES) \
+
+LOCAL_CFLAGS += -Werror $(bdroid_CFLAGS)
+
+ifeq ($(BOARD_HAVE_BLUETOOTH_BCM),true)
+LOCAL_CFLAGS += \
+	-DBOARD_HAVE_BLUETOOTH_BCM
+endif
+
+LOCAL_PRELINK_MODULE:=false
+LOCAL_SRC_FILES:= \
+    ./ulinux/gki_ulinux.c \
+    ./common/gki_debug.c \
+    ./common/gki_time.c \
+    ./common/gki_buffer.c
+
+LOCAL_MODULE := libbt-brcm_gki
+LOCAL_MODULE_TAGS := optional
+LOCAL_SHARED_LIBRARIES := libcutils libc
+LOCAL_MODULE_CLASS := STATIC_LIBRARIES
+
+include $(BUILD_STATIC_LIBRARY)
+
+endif  # TARGET_SIMULATOR != true
diff --git a/gki/common/gki.h b/gki/common/gki.h
new file mode 100644
index 0000000..5180dcd
--- /dev/null
+++ b/gki/common/gki.h
@@ -0,0 +1,494 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GKI_H
+#define GKI_H
+
+
+/* Include platform-specific over-rides */
+#if (defined(NFC_STANDALONE) && (NFC_STANDALONE == TRUE))
+    #include "gki_target.h"
+#else
+    /* For non-nfc_standalone, include Bluetooth definitions */
+    #include "bt_target.h"
+#endif
+
+
+
+#include "bt_types.h"
+
+/* Error codes */
+#define GKI_SUCCESS         0x00
+#define GKI_FAILURE         0x01
+#define GKI_INVALID_TASK    0xF0
+#define GKI_INVALID_POOL    0xFF
+
+
+/************************************************************************
+** Mailbox definitions. Each task has 4 mailboxes that are used to
+** send buffers to the task.
+*/
+#define TASK_MBOX_0    0
+#define TASK_MBOX_1    1
+#define TASK_MBOX_2    2
+#define TASK_MBOX_3    3
+
+#define NUM_TASK_MBOX  4
+
+/************************************************************************
+** Event definitions.
+**
+** There are 4 reserved events used to signal messages rcvd in task mailboxes.
+** There are 4 reserved events used to signal timeout events.
+** There are 8 general purpose events available for applications.
+*/
+#define MAX_EVENTS              16
+
+#define TASK_MBOX_0_EVT_MASK   0x0001
+#define TASK_MBOX_1_EVT_MASK   0x0002
+#define TASK_MBOX_2_EVT_MASK   0x0004
+#define TASK_MBOX_3_EVT_MASK   0x0008
+
+
+#define TIMER_0             0
+#define TIMER_1             1
+#define TIMER_2             2
+#define TIMER_3             3
+
+#define TIMER_0_EVT_MASK    0x0010
+#define TIMER_1_EVT_MASK    0x0020
+#define TIMER_2_EVT_MASK    0x0040
+#define TIMER_3_EVT_MASK    0x0080
+
+#define APPL_EVT_0          8
+#define APPL_EVT_1          9
+#define APPL_EVT_2          10
+#define APPL_EVT_3          11
+#define APPL_EVT_4          12
+#define APPL_EVT_5          13
+#define APPL_EVT_6          14
+#define APPL_EVT_7          15
+
+#define EVENT_MASK(evt)       ((UINT16)(0x0001 << (evt)))
+
+/************************************************************************
+**  Max Time Queue
+**/
+#ifndef GKI_MAX_TIMER_QUEUES
+#define GKI_MAX_TIMER_QUEUES    3
+#endif
+
+/************************************************************************
+**  Macro to determine the pool buffer size based on the GKI POOL ID at compile time.
+**  Pool IDs index from 0 to GKI_NUM_FIXED_BUF_POOLS - 1
+*/
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 1)
+
+#ifndef GKI_POOL_ID_0
+#define GKI_POOL_ID_0                0
+#endif /* ifndef GKI_POOL_ID_0 */
+
+#ifndef GKI_BUF0_SIZE
+#define GKI_BUF0_SIZE                0
+#endif /* ifndef GKI_BUF0_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 1 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 2)
+
+#ifndef GKI_POOL_ID_1
+#define GKI_POOL_ID_1                0
+#endif /* ifndef GKI_POOL_ID_1 */
+
+#ifndef GKI_BUF1_SIZE
+#define GKI_BUF1_SIZE                0
+#endif /* ifndef GKI_BUF1_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 2 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 3)
+
+#ifndef GKI_POOL_ID_2
+#define GKI_POOL_ID_2                0
+#endif /* ifndef GKI_POOL_ID_2 */
+
+#ifndef GKI_BUF2_SIZE
+#define GKI_BUF2_SIZE                0
+#endif /* ifndef GKI_BUF2_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 3 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 4)
+
+#ifndef GKI_POOL_ID_3
+#define GKI_POOL_ID_3                0
+#endif /* ifndef GKI_POOL_ID_4 */
+
+#ifndef GKI_BUF3_SIZE
+#define GKI_BUF3_SIZE                0
+#endif /* ifndef GKI_BUF3_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 4 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 5)
+
+#ifndef GKI_POOL_ID_4
+#define GKI_POOL_ID_4                0
+#endif /* ifndef GKI_POOL_ID_4 */
+
+#ifndef GKI_BUF4_SIZE
+#define GKI_BUF4_SIZE                0
+#endif /* ifndef GKI_BUF4_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 5 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 6)
+
+#ifndef GKI_POOL_ID_5
+#define GKI_POOL_ID_5                0
+#endif /* ifndef GKI_POOL_ID_5 */
+
+#ifndef GKI_BUF5_SIZE
+#define GKI_BUF5_SIZE                0
+#endif /* ifndef GKI_BUF5_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 6 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 7)
+
+#ifndef GKI_POOL_ID_6
+#define GKI_POOL_ID_6                0
+#endif /* ifndef GKI_POOL_ID_6 */
+
+#ifndef GKI_BUF6_SIZE
+#define GKI_BUF6_SIZE                0
+#endif /* ifndef GKI_BUF6_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 7 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 8)
+
+#ifndef GKI_POOL_ID_7
+#define GKI_POOL_ID_7                0
+#endif /* ifndef GKI_POOL_ID_7 */
+
+#ifndef GKI_BUF7_SIZE
+#define GKI_BUF7_SIZE                0
+#endif /* ifndef GKI_BUF7_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 8 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 9)
+
+#ifndef GKI_POOL_ID_8
+#define GKI_POOL_ID_8                0
+#endif /* ifndef GKI_POOL_ID_8 */
+
+#ifndef GKI_BUF8_SIZE
+#define GKI_BUF8_SIZE                0
+#endif /* ifndef GKI_BUF8_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 9 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 10)
+
+#ifndef GKI_POOL_ID_9
+#define GKI_POOL_ID_9                0
+#endif /* ifndef GKI_POOL_ID_9 */
+
+#ifndef GKI_BUF9_SIZE
+#define GKI_BUF9_SIZE                0
+#endif /* ifndef GKI_BUF9_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 10 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 11)
+
+#ifndef GKI_POOL_ID_10
+#define GKI_POOL_ID_10                0
+#endif /* ifndef GKI_POOL_ID_10 */
+
+#ifndef GKI_BUF10_SIZE
+#define GKI_BUF10_SIZE                0
+#endif /* ifndef GKI_BUF10_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 11 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 12)
+
+#ifndef GKI_POOL_ID_11
+#define GKI_POOL_ID_11                0
+#endif /* ifndef GKI_POOL_ID_11 */
+
+#ifndef GKI_BUF11_SIZE
+#define GKI_BUF11_SIZE                0
+#endif /* ifndef GKI_BUF11_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 12 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 13)
+
+#ifndef GKI_POOL_ID_12
+#define GKI_POOL_ID_12                0
+#endif /* ifndef GKI_POOL_ID_12 */
+
+#ifndef GKI_BUF12_SIZE
+#define GKI_BUF12_SIZE                0
+#endif /* ifndef GKI_BUF12_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 13 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 14)
+
+#ifndef GKI_POOL_ID_13
+#define GKI_POOL_ID_13                0
+#endif /* ifndef GKI_POOL_ID_13 */
+
+#ifndef GKI_BUF13_SIZE
+#define GKI_BUF13_SIZE                0
+#endif /* ifndef GKI_BUF13_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 14 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 15)
+
+#ifndef GKI_POOL_ID_14
+#define GKI_POOL_ID_14                0
+#endif /* ifndef GKI_POOL_ID_14 */
+
+#ifndef GKI_BUF14_SIZE
+#define GKI_BUF14_SIZE                0
+#endif /* ifndef GKI_BUF14_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 15 */
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS < 16)
+
+#ifndef GKI_POOL_ID_15
+#define GKI_POOL_ID_15                0
+#endif /* ifndef GKI_POOL_ID_15 */
+
+#ifndef GKI_BUF15_SIZE
+#define GKI_BUF15_SIZE                0
+#endif /* ifndef GKI_BUF15_SIZE */
+
+#endif /* GKI_NUM_FIXED_BUF_POOLS < 16 */
+
+
+/* Timer list entry callback type
+*/
+typedef void (TIMER_CBACK)(void *p_tle);
+#ifndef TIMER_PARAM_TYPE
+#ifdef  WIN2000
+#define TIMER_PARAM_TYPE    void *
+#else
+#define TIMER_PARAM_TYPE    UINT32
+#endif
+#endif
+/* Define a timer list entry
+*/
+typedef struct _tle
+{
+    struct _tle  *p_next;
+    struct _tle  *p_prev;
+    TIMER_CBACK  *p_cback;
+    INT32         ticks;
+    TIMER_PARAM_TYPE   param;
+    UINT16        event;
+    UINT8         in_use;
+} TIMER_LIST_ENT;
+
+/* Define a timer list queue
+*/
+typedef struct
+{
+    TIMER_LIST_ENT   *p_first;
+    TIMER_LIST_ENT   *p_last;
+    INT32             last_ticks;
+} TIMER_LIST_Q;
+
+
+/***********************************************************************
+** This queue is a general purpose buffer queue, for application use.
+*/
+typedef struct
+{
+    void    *p_first;
+    void    *p_last;
+    UINT16   count;
+} BUFFER_Q;
+
+#define GKI_IS_QUEUE_EMPTY(p_q) ((p_q)->count == 0)
+
+/* Task constants
+*/
+#ifndef TASKPTR
+typedef void (*TASKPTR)(UINT32);
+#endif
+
+
+#define GKI_PUBLIC_POOL         0       /* General pool accessible to GKI_getbuf() */
+#define GKI_RESTRICTED_POOL     1       /* Inaccessible pool to GKI_getbuf() */
+
+/***********************************************************************
+** Function prototypes
+*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Task management
+*/
+GKI_API extern UINT8   GKI_create_task (TASKPTR, UINT8, INT8 *, UINT16 *, UINT16);
+GKI_API extern void    GKI_destroy_task(UINT8 task_id);
+GKI_API extern void    GKI_task_self_cleanup(UINT8 task_id);
+GKI_API extern void    GKI_exit_task(UINT8);
+GKI_API extern UINT8   GKI_get_taskid(void);
+GKI_API extern void    GKI_init(void);
+GKI_API extern void    GKI_shutdown(void);
+GKI_API extern INT8   *GKI_map_taskname(UINT8);
+GKI_API extern UINT8   GKI_resume_task(UINT8);
+GKI_API extern void    GKI_run(void *);
+GKI_API extern void    GKI_freeze(void);
+GKI_API extern void    GKI_stop(void);
+GKI_API extern UINT8   GKI_suspend_task(UINT8);
+GKI_API extern UINT8   GKI_is_task_running(UINT8);
+
+/* memory management
+*/
+GKI_API extern void GKI_shiftdown (UINT8 *p_mem, UINT32 len, UINT32 shift_amount);
+GKI_API extern void GKI_shiftup (UINT8 *p_dest, UINT8 *p_src, UINT32 len);
+
+/* To send buffers and events between tasks
+*/
+GKI_API extern UINT8   GKI_isend_event (UINT8, UINT16);
+GKI_API extern void    GKI_isend_msg (UINT8, UINT8, void *);
+GKI_API extern void   *GKI_read_mbox  (UINT8);
+GKI_API extern void    GKI_send_msg   (UINT8, UINT8, void *);
+GKI_API extern UINT8   GKI_send_event (UINT8, UINT16);
+
+
+/* To get and release buffers, change owner and get size
+*/
+GKI_API extern void    GKI_change_buf_owner (void *, UINT8);
+GKI_API extern UINT8   GKI_create_pool (UINT16, UINT16, UINT8, void *);
+GKI_API extern void    GKI_delete_pool (UINT8);
+GKI_API extern void   *GKI_find_buf_start (void *);
+GKI_API extern void    GKI_freebuf (void *);
+GKI_API extern void   *GKI_getbuf (UINT16);
+GKI_API extern UINT16  GKI_get_buf_size (void *);
+GKI_API extern void   *GKI_getpoolbuf (UINT8);
+GKI_API extern UINT16  GKI_poolcount (UINT8);
+GKI_API extern UINT16  GKI_poolfreecount (UINT8);
+GKI_API extern UINT16  GKI_poolutilization (UINT8);
+GKI_API extern void    GKI_register_mempool (void *p_mem);
+GKI_API extern UINT8   GKI_set_pool_permission(UINT8, UINT8);
+
+
+/* User buffer queue management
+*/
+GKI_API extern void   *GKI_dequeue  (BUFFER_Q *);
+GKI_API extern void    GKI_enqueue (BUFFER_Q *, void *);
+GKI_API extern void    GKI_enqueue_head (BUFFER_Q *, void *);
+GKI_API extern void   *GKI_getfirst (BUFFER_Q *);
+GKI_API extern void   *GKI_getlast (BUFFER_Q *);
+GKI_API extern void   *GKI_getnext (void *);
+GKI_API extern void    GKI_init_q (BUFFER_Q *);
+GKI_API extern BOOLEAN GKI_queue_is_empty(BUFFER_Q *);
+GKI_API extern void   *GKI_remove_from_queue (BUFFER_Q *, void *);
+GKI_API extern UINT16  GKI_get_pool_bufsize (UINT8);
+
+/* Timer management
+*/
+GKI_API extern void    GKI_add_to_timer_list (TIMER_LIST_Q *, TIMER_LIST_ENT  *);
+GKI_API extern void    GKI_delay(UINT32);
+GKI_API extern UINT32  GKI_get_tick_count(void);
+GKI_API extern INT8   *GKI_get_time_stamp(INT8 *);
+GKI_API extern void    GKI_init_timer_list (TIMER_LIST_Q *);
+GKI_API extern void    GKI_init_timer_list_entry (TIMER_LIST_ENT  *);
+GKI_API extern INT32   GKI_ready_to_sleep (void);
+GKI_API extern void    GKI_remove_from_timer_list (TIMER_LIST_Q *, TIMER_LIST_ENT  *);
+GKI_API extern void    GKI_start_timer(UINT8, INT32, BOOLEAN);
+GKI_API extern void    GKI_stop_timer (UINT8);
+GKI_API extern void    GKI_timer_update(INT32);
+GKI_API extern UINT16  GKI_update_timer_list (TIMER_LIST_Q *, INT32);
+GKI_API extern UINT32  GKI_get_remaining_ticks (TIMER_LIST_Q *, TIMER_LIST_ENT  *);
+GKI_API extern UINT16  GKI_wait(UINT16, UINT32);
+
+/* Start and Stop system time tick callback
+ * true for start system tick if time queue is not empty
+ * false to stop system tick if time queue is empty
+*/
+typedef void (SYSTEM_TICK_CBACK)(BOOLEAN);
+
+/* Time queue management for system ticks
+*/
+GKI_API extern BOOLEAN GKI_timer_queue_empty (void);
+GKI_API extern void    GKI_timer_queue_register_callback(SYSTEM_TICK_CBACK *);
+
+/* Disable Interrupts, Enable Interrupts
+*/
+GKI_API extern void    GKI_enable(void);
+GKI_API extern void    GKI_disable(void);
+GKI_API extern void    GKI_sched_lock(void);
+GKI_API extern void    GKI_sched_unlock(void);
+
+/* Allocate (Free) memory from an OS
+*/
+GKI_API extern void     *GKI_os_malloc (UINT32);
+GKI_API extern void      GKI_os_free (void *);
+
+/* os timer operation */
+GKI_API extern UINT32 GKI_get_os_tick_count(void);
+
+/* Exception handling
+*/
+GKI_API extern void    GKI_exception (UINT16, char *);
+
+#if GKI_DEBUG == TRUE
+GKI_API extern void    GKI_PrintBufferUsage(UINT8 *p_num_pools, UINT16 *p_cur_used);
+GKI_API extern void    GKI_PrintBuffer(void);
+GKI_API extern void    GKI_print_task(void);
+#else
+#undef GKI_PrintBufferUsage
+#define GKI_PrintBuffer() NULL
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
diff --git a/gki/common/gki_buffer.c b/gki/common/gki_buffer.c
new file mode 100644
index 0000000..f474bab
--- /dev/null
+++ b/gki/common/gki_buffer.c
@@ -0,0 +1,1481 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#include "gki_int.h"
+#include <cutils/log.h>
+
+#if (GKI_NUM_TOTAL_BUF_POOLS > 16)
+#error Number of pools out of range (16 Max)!
+#endif
+
+static void gki_add_to_pool_list(UINT8 pool_id);
+static void gki_remove_from_pool_list(UINT8 pool_id);
+
+/*******************************************************************************
+**
+** Function         gki_init_free_queue
+**
+** Description      Internal function called at startup to initialize a free
+**                  queue. It is called once for each free queue.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gki_init_free_queue (UINT8 id, UINT16 size, UINT16 total, void *p_mem)
+{
+    UINT16           i;
+    UINT16           act_size;
+    BUFFER_HDR_T    *hdr;
+    BUFFER_HDR_T    *hdr1 = NULL;
+    UINT32          *magic;
+    INT32            tempsize = size;
+    tGKI_COM_CB     *p_cb = &gki_cb.com;
+
+    /* Ensure an even number of longwords */
+    tempsize = (INT32)ALIGN_POOL(size);
+    act_size = (UINT16)(tempsize + BUFFER_PADDING_SIZE);
+
+    /* Remember pool start and end addresses */
+// btla-specific ++
+    if(p_mem)
+    {
+        p_cb->pool_start[id] = (UINT8 *)p_mem;
+        p_cb->pool_end[id]   = (UINT8 *)p_mem + (act_size * total);
+    }
+// btla-specific --
+
+    p_cb->pool_size[id]  = act_size;
+
+    p_cb->freeq[id].size      = (UINT16) tempsize;
+    p_cb->freeq[id].total     = total;
+    p_cb->freeq[id].cur_cnt   = 0;
+    p_cb->freeq[id].max_cnt   = 0;
+
+    /* Initialize  index table */
+// btla-specific ++
+    if(p_mem)
+    {
+        hdr = (BUFFER_HDR_T *)p_mem;
+        p_cb->freeq[id].p_first = hdr;
+        for (i = 0; i < total; i++)
+        {
+            hdr->task_id = GKI_INVALID_TASK;
+            hdr->q_id    = id;
+            hdr->status  = BUF_STATUS_FREE;
+            magic        = (UINT32 *)((UINT8 *)hdr + BUFFER_HDR_SIZE + tempsize);
+            *magic       = MAGIC_NO;
+            hdr1         = hdr;
+            hdr          = (BUFFER_HDR_T *)((UINT8 *)hdr + act_size);
+            hdr1->p_next = hdr;
+        }
+        hdr1->p_next = NULL;
+        p_cb->freeq[id].p_last = hdr1;
+    }
+// btla-specific --
+    return;
+}
+
+// btla-specific ++
+#ifdef GKI_USE_DEFERED_ALLOC_BUF_POOLS
+static BOOLEAN gki_alloc_free_queue(UINT8 id)
+{
+    FREE_QUEUE_T  *Q;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+    GKI_TRACE("\ngki_alloc_free_queue in, id:%d \n", (int)id );
+
+    Q = &p_cb->freeq[p_cb->pool_list[id]];
+
+    if(Q->p_first == 0)
+    {
+        void* p_mem = GKI_os_malloc((Q->size + BUFFER_PADDING_SIZE) * Q->total);
+        if(p_mem)
+        {
+            //re-initialize the queue with allocated memory
+            GKI_TRACE("\ngki_alloc_free_queue calling  gki_init_free_queue, id:%d  size:%d, totol:%d\n", id, Q->size, Q->total);
+            gki_init_free_queue(id, Q->size, Q->total, p_mem);
+            GKI_TRACE("\ngki_alloc_free_queue ret OK, id:%d  size:%d, totol:%d\n", id, Q->size, Q->total);
+            return TRUE;
+        }
+        GKI_exception (GKI_ERROR_BUF_SIZE_TOOBIG, "gki_alloc_free_queue: Not enough memory");
+    }
+    GKI_TRACE("\ngki_alloc_free_queue out failed, id:%d\n", id);
+    return FALSE;
+}
+
+void gki_dealloc_free_queue(void)
+{
+    UINT8   i;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    for (i=0; i < p_cb->curr_total_no_of_pools; i++)
+    {
+        if ( 0 < p_cb->freeq[i].max_cnt )
+        {
+            GKI_os_free(p_cb->pool_start[i]);
+
+            p_cb->freeq[i].cur_cnt   = 0;
+            p_cb->freeq[i].max_cnt   = 0;
+            p_cb->freeq[i].p_first   = NULL;
+            p_cb->freeq[i].p_last    = NULL;
+
+            p_cb->pool_start[i] = NULL;
+            p_cb->pool_end[i]   = NULL;
+            p_cb->pool_size[i]  = 0;
+        }
+    }
+}
+
+#endif
+// btla-specific --
+
+/*******************************************************************************
+**
+** Function         gki_buffer_init
+**
+** Description      Called once internally by GKI at startup to initialize all
+**                  buffers and free buffer pools.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_buffer_init(void)
+{
+    UINT8   i, tt, mb;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    /* Initialize mailboxes */
+    for (tt = 0; tt < GKI_MAX_TASKS; tt++)
+    {
+        for (mb = 0; mb < NUM_TASK_MBOX; mb++)
+        {
+            p_cb->OSTaskQFirst[tt][mb] = NULL;
+            p_cb->OSTaskQLast [tt][mb] = NULL;
+        }
+    }
+
+    for (tt = 0; tt < GKI_NUM_TOTAL_BUF_POOLS; tt++)
+    {
+        p_cb->pool_start[tt] = NULL;
+        p_cb->pool_end[tt]   = NULL;
+        p_cb->pool_size[tt]  = 0;
+
+        p_cb->freeq[tt].p_first = 0;
+        p_cb->freeq[tt].p_last  = 0;
+        p_cb->freeq[tt].size    = 0;
+        p_cb->freeq[tt].total   = 0;
+        p_cb->freeq[tt].cur_cnt = 0;
+        p_cb->freeq[tt].max_cnt = 0;
+    }
+
+    /* Use default from target.h */
+    p_cb->pool_access_mask = GKI_DEF_BUFPOOL_PERM_MASK;
+
+// btla-specific ++
+#if (!defined GKI_USE_DEFERED_ALLOC_BUF_POOLS && (GKI_USE_DYNAMIC_BUFFERS == TRUE))
+// btla-specific --
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 0)
+    p_cb->bufpool0 = (UINT8 *)GKI_os_malloc ((GKI_BUF0_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF0_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 1)
+    p_cb->bufpool1 = (UINT8 *)GKI_os_malloc ((GKI_BUF1_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF1_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 2)
+    p_cb->bufpool2 = (UINT8 *)GKI_os_malloc ((GKI_BUF2_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF2_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 3)
+    p_cb->bufpool3 = (UINT8 *)GKI_os_malloc ((GKI_BUF3_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF3_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 4)
+    p_cb->bufpool4 = (UINT8 *)GKI_os_malloc ((GKI_BUF4_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF4_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 5)
+    p_cb->bufpool5 = (UINT8 *)GKI_os_malloc ((GKI_BUF5_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF5_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 6)
+    p_cb->bufpool6 = (UINT8 *)GKI_os_malloc ((GKI_BUF6_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF6_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 7)
+    p_cb->bufpool7 = (UINT8 *)GKI_os_malloc ((GKI_BUF7_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF7_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 8)
+    p_cb->bufpool8 = (UINT8 *)GKI_os_malloc ((GKI_BUF8_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF8_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 9)
+    p_cb->bufpool9 = (UINT8 *)GKI_os_malloc ((GKI_BUF9_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF9_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 10)
+    p_cb->bufpool10 = (UINT8 *)GKI_os_malloc ((GKI_BUF10_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF10_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 11)
+    p_cb->bufpool11 = (UINT8 *)GKI_os_malloc ((GKI_BUF11_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF11_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 12)
+    p_cb->bufpool12 = (UINT8 *)GKI_os_malloc ((GKI_BUF12_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF12_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 13)
+    p_cb->bufpool13 = (UINT8 *)GKI_os_malloc ((GKI_BUF13_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF13_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 14)
+    p_cb->bufpool14 = (UINT8 *)GKI_os_malloc ((GKI_BUF14_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF14_MAX);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 15)
+    p_cb->bufpool15 = (UINT8 *)GKI_os_malloc ((GKI_BUF15_SIZE + BUFFER_PADDING_SIZE) * GKI_BUF15_MAX);
+#endif
+
+#endif
+
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 0)
+    gki_init_free_queue(0, GKI_BUF0_SIZE, GKI_BUF0_MAX, p_cb->bufpool0);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 1)
+    gki_init_free_queue(1, GKI_BUF1_SIZE, GKI_BUF1_MAX, p_cb->bufpool1);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 2)
+    gki_init_free_queue(2, GKI_BUF2_SIZE, GKI_BUF2_MAX, p_cb->bufpool2);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 3)
+    gki_init_free_queue(3, GKI_BUF3_SIZE, GKI_BUF3_MAX, p_cb->bufpool3);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 4)
+    gki_init_free_queue(4, GKI_BUF4_SIZE, GKI_BUF4_MAX, p_cb->bufpool4);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 5)
+    gki_init_free_queue(5, GKI_BUF5_SIZE, GKI_BUF5_MAX, p_cb->bufpool5);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 6)
+    gki_init_free_queue(6, GKI_BUF6_SIZE, GKI_BUF6_MAX, p_cb->bufpool6);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 7)
+    gki_init_free_queue(7, GKI_BUF7_SIZE, GKI_BUF7_MAX, p_cb->bufpool7);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 8)
+    gki_init_free_queue(8, GKI_BUF8_SIZE, GKI_BUF8_MAX, p_cb->bufpool8);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 9)
+    gki_init_free_queue(9, GKI_BUF9_SIZE, GKI_BUF9_MAX, p_cb->bufpool9);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 10)
+    gki_init_free_queue(10, GKI_BUF10_SIZE, GKI_BUF10_MAX, p_cb->bufpool10);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 11)
+    gki_init_free_queue(11, GKI_BUF11_SIZE, GKI_BUF11_MAX, p_cb->bufpool11);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 12)
+    gki_init_free_queue(12, GKI_BUF12_SIZE, GKI_BUF12_MAX, p_cb->bufpool12);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 13)
+    gki_init_free_queue(13, GKI_BUF13_SIZE, GKI_BUF13_MAX, p_cb->bufpool13);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 14)
+    gki_init_free_queue(14, GKI_BUF14_SIZE, GKI_BUF14_MAX, p_cb->bufpool14);
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 15)
+    gki_init_free_queue(15, GKI_BUF15_SIZE, GKI_BUF15_MAX, p_cb->bufpool15);
+#endif
+
+    /* add pools to the pool_list which is arranged in the order of size */
+    for(i=0; i < GKI_NUM_FIXED_BUF_POOLS ; i++)
+    {
+        p_cb->pool_list[i] = i;
+    }
+
+    p_cb->curr_total_no_of_pools = GKI_NUM_FIXED_BUF_POOLS;
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_init_q
+**
+** Description      Called by an application to initialize a buffer queue.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_init_q (BUFFER_Q *p_q)
+{
+    p_q->p_first = p_q->p_last = NULL;
+    p_q->count = 0;
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_getbuf
+**
+** Description      Called by an application to get a free buffer which
+**                  is of size greater or equal to the requested size.
+**
+**                  Note: This routine only takes buffers from public pools.
+**                        It will not use any buffers from pools
+**                        marked GKI_RESTRICTED_POOL.
+**
+** Parameters       size - (input) number of bytes needed.
+**
+** Returns          A pointer to the buffer, or NULL if none available
+**
+*******************************************************************************/
+void *GKI_getbuf (UINT16 size)
+{
+    UINT8         i;
+    FREE_QUEUE_T  *Q;
+    BUFFER_HDR_T  *p_hdr;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    if (size == 0)
+    {
+        GKI_exception (GKI_ERROR_BUF_SIZE_ZERO, "getbuf: Size is zero");
+        return (NULL);
+    }
+
+    /* Find the first buffer pool that is public that can hold the desired size */
+    for (i=0; i < p_cb->curr_total_no_of_pools; i++)
+    {
+        if ( size <= p_cb->freeq[p_cb->pool_list[i]].size )
+            break;
+    }
+
+    if(i == p_cb->curr_total_no_of_pools)
+    {
+        GKI_exception (GKI_ERROR_BUF_SIZE_TOOBIG, "getbuf: Size is too big");
+        return (NULL);
+    }
+
+    /* Make sure the buffers aren't disturbed til finished with allocation */
+    GKI_disable();
+
+    /* search the public buffer pools that are big enough to hold the size
+     * until a free buffer is found */
+    for ( ; i < p_cb->curr_total_no_of_pools; i++)
+    {
+        /* Only look at PUBLIC buffer pools (bypass RESTRICTED pools) */
+        if (((UINT16)1 << p_cb->pool_list[i]) & p_cb->pool_access_mask)
+            continue;
+
+        Q = &p_cb->freeq[p_cb->pool_list[i]];
+        if(Q->cur_cnt < Q->total)
+        {
+// btla-specific ++
+        #ifdef GKI_USE_DEFERED_ALLOC_BUF_POOLS
+            if(Q->p_first == 0 && gki_alloc_free_queue(i) != TRUE)
+                return NULL;
+        #endif
+// btla-specific --
+            p_hdr = Q->p_first;
+            Q->p_first = p_hdr->p_next;
+
+            if (!Q->p_first)
+                Q->p_last = NULL;
+
+            if(++Q->cur_cnt > Q->max_cnt)
+                Q->max_cnt = Q->cur_cnt;
+
+            GKI_enable();
+
+            p_hdr->task_id = GKI_get_taskid();
+
+            p_hdr->status  = BUF_STATUS_UNLINKED;
+            p_hdr->p_next  = NULL;
+            p_hdr->Type    = 0;
+
+            return ((void *) ((UINT8 *)p_hdr + BUFFER_HDR_SIZE));
+        }
+    }
+
+    GKI_enable();
+
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_getpoolbuf
+**
+** Description      Called by an application to get a free buffer from
+**                  a specific buffer pool.
+**
+**                  Note: If there are no more buffers available from the pool,
+**                        the public buffers are searched for an available buffer.
+**
+** Parameters       pool_id - (input) pool ID to get a buffer out of.
+**
+** Returns          A pointer to the buffer, or NULL if none available
+**
+*******************************************************************************/
+void *GKI_getpoolbuf (UINT8 pool_id)
+{
+    FREE_QUEUE_T  *Q;
+    BUFFER_HDR_T  *p_hdr;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    if (pool_id >= GKI_NUM_TOTAL_BUF_POOLS)
+        return (NULL);
+
+    /* Make sure the buffers aren't disturbed til finished with allocation */
+    GKI_disable();
+
+    Q = &p_cb->freeq[pool_id];
+    if(Q->cur_cnt < Q->total)
+    {
+// btla-specific ++
+#ifdef GKI_USE_DEFERED_ALLOC_BUF_POOLS
+        if(Q->p_first == 0 && gki_alloc_free_queue(pool_id) != TRUE)
+            return NULL;
+#endif
+// btla-specific --
+        p_hdr = Q->p_first;
+        Q->p_first = p_hdr->p_next;
+
+        if (!Q->p_first)
+            Q->p_last = NULL;
+
+        if(++Q->cur_cnt > Q->max_cnt)
+            Q->max_cnt = Q->cur_cnt;
+
+        GKI_enable();
+
+
+        p_hdr->task_id = GKI_get_taskid();
+
+        p_hdr->status  = BUF_STATUS_UNLINKED;
+        p_hdr->p_next  = NULL;
+        p_hdr->Type    = 0;
+
+        return ((void *) ((UINT8 *)p_hdr + BUFFER_HDR_SIZE));
+    }
+
+    /* If here, no buffers in the specified pool */
+    GKI_enable();
+
+    /* try for free buffers in public pools */
+    return (GKI_getbuf(p_cb->freeq[pool_id].size));
+
+}
+
+/*******************************************************************************
+**
+** Function         GKI_freebuf
+**
+** Description      Called by an application to return a buffer to the free pool.
+**
+** Parameters       p_buf - (input) address of the beginning of a buffer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_freebuf (void *p_buf)
+{
+    FREE_QUEUE_T    *Q;
+    BUFFER_HDR_T    *p_hdr;
+
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+    if (!p_buf || gki_chk_buf_damage(p_buf))
+    {
+        GKI_exception(GKI_ERROR_BUF_CORRUPTED, "Free - Buf Corrupted");
+        return;
+    }
+#endif
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *)p_buf - BUFFER_HDR_SIZE);
+
+    if (p_hdr->status != BUF_STATUS_UNLINKED)
+    {
+        GKI_exception(GKI_ERROR_FREEBUF_BUF_LINKED, "Freeing Linked Buf");
+        return;
+    }
+
+    if (p_hdr->q_id >= GKI_NUM_TOTAL_BUF_POOLS)
+    {
+        GKI_exception(GKI_ERROR_FREEBUF_BAD_QID, "Bad Buf QId");
+        return;
+    }
+
+    GKI_disable();
+
+    /*
+    ** Release the buffer
+    */
+    Q  = &gki_cb.com.freeq[p_hdr->q_id];
+    if (Q->p_last)
+        Q->p_last->p_next = p_hdr;
+    else
+        Q->p_first = p_hdr;
+
+    Q->p_last      = p_hdr;
+    p_hdr->p_next  = NULL;
+    p_hdr->status  = BUF_STATUS_FREE;
+    p_hdr->task_id = GKI_INVALID_TASK;
+    if (Q->cur_cnt > 0)
+        Q->cur_cnt--;
+
+    GKI_enable();
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_get_buf_size
+**
+** Description      Called by an application to get the size of a buffer.
+**
+** Parameters       p_buf - (input) address of the beginning of a buffer.
+**
+** Returns          the size of the buffer
+**
+*******************************************************************************/
+UINT16 GKI_get_buf_size (void *p_buf)
+{
+    BUFFER_HDR_T    *p_hdr;
+
+    p_hdr = (BUFFER_HDR_T *)((UINT8 *) p_buf - BUFFER_HDR_SIZE);
+
+    if ((UINT32)p_hdr & 1)
+        return (0);
+
+    if (p_hdr->q_id < GKI_NUM_TOTAL_BUF_POOLS)
+    {
+        return (gki_cb.com.freeq[p_hdr->q_id].size);
+    }
+
+    return (0);
+}
+
+/*******************************************************************************
+**
+** Function         gki_chk_buf_damage
+**
+** Description      Called internally by OSS to check for buffer corruption.
+**
+** Returns          TRUE if there is a problem, else FALSE
+**
+*******************************************************************************/
+BOOLEAN gki_chk_buf_damage(void *p_buf)
+{
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+
+    UINT32 *magic;
+    magic  = (UINT32 *)((UINT8 *) p_buf + GKI_get_buf_size(p_buf));
+
+    if ((UINT32)magic & 1)
+        return (TRUE);
+
+    if (*magic == MAGIC_NO)
+        return (FALSE);
+
+    return (TRUE);
+
+#else
+
+    return (FALSE);
+
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         GKI_send_msg
+**
+** Description      Called by applications to send a buffer to a task
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+void GKI_send_msg (UINT8 task_id, UINT8 mbox, void *msg)
+{
+    BUFFER_HDR_T    *p_hdr;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    /* If task non-existant or not started, drop buffer */
+    if ((task_id >= GKI_MAX_TASKS) || (mbox >= NUM_TASK_MBOX) || (p_cb->OSRdyTbl[task_id] == TASK_DEAD))
+    {
+        GKI_exception(GKI_ERROR_SEND_MSG_BAD_DEST, "Sending to unknown dest");
+        GKI_freebuf (msg);
+        return;
+    }
+
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+    if (gki_chk_buf_damage(msg))
+    {
+        GKI_exception(GKI_ERROR_BUF_CORRUPTED, "Send - Buffer corrupted");
+        return;
+    }
+#endif
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *) msg - BUFFER_HDR_SIZE);
+
+    if (p_hdr->status != BUF_STATUS_UNLINKED)
+    {
+        GKI_exception(GKI_ERROR_SEND_MSG_BUF_LINKED, "Send - buffer linked");
+        return;
+    }
+
+    GKI_disable();
+
+    if (p_cb->OSTaskQFirst[task_id][mbox])
+        p_cb->OSTaskQLast[task_id][mbox]->p_next = p_hdr;
+    else
+        p_cb->OSTaskQFirst[task_id][mbox] = p_hdr;
+
+    p_cb->OSTaskQLast[task_id][mbox] = p_hdr;
+
+    p_hdr->p_next = NULL;
+    p_hdr->status = BUF_STATUS_QUEUED;
+    p_hdr->task_id = task_id;
+
+
+    GKI_enable();
+
+    GKI_send_event(task_id, (UINT16)EVENT_MASK(mbox));
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_read_mbox
+**
+** Description      Called by applications to read a buffer from one of
+**                  the task mailboxes.  A task can only read its own mailbox.
+**
+** Parameters:      mbox  - (input) mailbox ID to read (0, 1, 2, or 3)
+**
+** Returns          NULL if the mailbox was empty, else the address of a buffer
+**
+*******************************************************************************/
+void *GKI_read_mbox (UINT8 mbox)
+{
+    UINT8           task_id = GKI_get_taskid();
+    void            *p_buf = NULL;
+    BUFFER_HDR_T    *p_hdr;
+
+    if ((task_id >= GKI_MAX_TASKS) || (mbox >= NUM_TASK_MBOX))
+        return (NULL);
+
+    GKI_disable();
+
+    if (gki_cb.com.OSTaskQFirst[task_id][mbox])
+    {
+        p_hdr = gki_cb.com.OSTaskQFirst[task_id][mbox];
+        gki_cb.com.OSTaskQFirst[task_id][mbox] = p_hdr->p_next;
+
+        p_hdr->p_next = NULL;
+        p_hdr->status = BUF_STATUS_UNLINKED;
+
+        p_buf = (UINT8 *)p_hdr + BUFFER_HDR_SIZE;
+    }
+
+    GKI_enable();
+
+    return (p_buf);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         GKI_enqueue
+**
+** Description      Enqueue a buffer at the tail of the queue
+**
+** Parameters:      p_q  -  (input) pointer to a queue.
+**                  p_buf - (input) address of the buffer to enqueue
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_enqueue (BUFFER_Q *p_q, void *p_buf)
+{
+    BUFFER_HDR_T    *p_hdr;
+
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+    if (gki_chk_buf_damage(p_buf))
+    {
+        GKI_exception(GKI_ERROR_BUF_CORRUPTED, "Enqueue - Buffer corrupted");
+        return;
+    }
+#endif
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *) p_buf - BUFFER_HDR_SIZE);
+
+    if (p_hdr->status != BUF_STATUS_UNLINKED)
+    {
+        GKI_exception(GKI_ERROR_ENQUEUE_BUF_LINKED, "Eneueue - buf already linked");
+        return;
+    }
+
+    GKI_disable();
+
+    /* Since the queue is exposed (C vs C++), keep the pointers in exposed format */
+    if (p_q->p_last)
+    {
+        BUFFER_HDR_T *p_last_hdr = (BUFFER_HDR_T *)((UINT8 *)p_q->p_last - BUFFER_HDR_SIZE);
+        p_last_hdr->p_next = p_hdr;
+    }
+    else
+        p_q->p_first = p_buf;
+
+    p_q->p_last = p_buf;
+    p_q->count++;
+
+    p_hdr->p_next = NULL;
+    p_hdr->status = BUF_STATUS_QUEUED;
+
+    GKI_enable();
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_enqueue_head
+**
+** Description      Enqueue a buffer at the head of the queue
+**
+** Parameters:      p_q  -  (input) pointer to a queue.
+**                  p_buf - (input) address of the buffer to enqueue
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_enqueue_head (BUFFER_Q *p_q, void *p_buf)
+{
+    BUFFER_HDR_T    *p_hdr;
+
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+    if (gki_chk_buf_damage(p_buf))
+    {
+        GKI_exception(GKI_ERROR_BUF_CORRUPTED, "Enqueue - Buffer corrupted");
+        return;
+    }
+#endif
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *) p_buf - BUFFER_HDR_SIZE);
+
+    if (p_hdr->status != BUF_STATUS_UNLINKED)
+    {
+        GKI_exception(GKI_ERROR_ENQUEUE_BUF_LINKED, "Eneueue head - buf already linked");
+        return;
+    }
+
+    GKI_disable();
+
+    if (p_q->p_first)
+    {
+        p_hdr->p_next = (BUFFER_HDR_T *)((UINT8 *)p_q->p_first - BUFFER_HDR_SIZE);
+        p_q->p_first = p_buf;
+    }
+    else
+    {
+        p_q->p_first = p_buf;
+        p_q->p_last  = p_buf;
+        p_hdr->p_next = NULL;
+    }
+    p_q->count++;
+
+    p_hdr->status = BUF_STATUS_QUEUED;
+
+    GKI_enable();
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_dequeue
+**
+** Description      Dequeues a buffer from the head of a queue
+**
+** Parameters:      p_q  - (input) pointer to a queue.
+**
+** Returns          NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *GKI_dequeue (BUFFER_Q *p_q)
+{
+    BUFFER_HDR_T    *p_hdr;
+
+    GKI_disable();
+
+    if (!p_q || !p_q->count)
+    {
+        GKI_enable();
+        return (NULL);
+    }
+
+    p_hdr = (BUFFER_HDR_T *)((UINT8 *)p_q->p_first - BUFFER_HDR_SIZE);
+
+    /* Keep buffers such that GKI header is invisible
+    */
+    if (p_hdr->p_next)
+        p_q->p_first = ((UINT8 *)p_hdr->p_next + BUFFER_HDR_SIZE);
+    else
+    {
+        p_q->p_first = NULL;
+        p_q->p_last  = NULL;
+    }
+
+    p_q->count--;
+
+    p_hdr->p_next = NULL;
+    p_hdr->status = BUF_STATUS_UNLINKED;
+
+    GKI_enable();
+
+    return ((UINT8 *)p_hdr + BUFFER_HDR_SIZE);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_remove_from_queue
+**
+** Description      Dequeue a buffer from the middle of the queue
+**
+** Parameters:      p_q  - (input) pointer to a queue.
+**                  p_buf - (input) address of the buffer to enqueue
+**
+** Returns          NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *GKI_remove_from_queue (BUFFER_Q *p_q, void *p_buf)
+{
+    BUFFER_HDR_T    *p_prev;
+    BUFFER_HDR_T    *p_buf_hdr;
+
+    GKI_disable();
+
+    if (p_buf == p_q->p_first)
+    {
+        GKI_enable();
+        return (GKI_dequeue (p_q));
+    }
+
+    p_buf_hdr = (BUFFER_HDR_T *)((UINT8 *)p_buf - BUFFER_HDR_SIZE);
+    p_prev    = (BUFFER_HDR_T *)((UINT8 *)p_q->p_first - BUFFER_HDR_SIZE);
+
+    for ( ; p_prev; p_prev = p_prev->p_next)
+    {
+        /* If the previous points to this one, move the pointers around */
+        if (p_prev->p_next == p_buf_hdr)
+        {
+            p_prev->p_next = p_buf_hdr->p_next;
+
+            /* If we are removing the last guy in the queue, update p_last */
+            if (p_buf == p_q->p_last)
+                p_q->p_last = p_prev + 1;
+
+            /* One less in the queue */
+            p_q->count--;
+
+            /* The buffer is now unlinked */
+            p_buf_hdr->p_next = NULL;
+            p_buf_hdr->status = BUF_STATUS_UNLINKED;
+
+            GKI_enable();
+            return (p_buf);
+        }
+    }
+
+    GKI_enable();
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_getfirst
+**
+** Description      Return a pointer to the first buffer in a queue
+**
+** Parameters:      p_q  - (input) pointer to a queue.
+**
+** Returns          NULL if queue is empty, else buffer address
+**
+*******************************************************************************/
+void *GKI_getfirst (BUFFER_Q *p_q)
+{
+    return (p_q->p_first);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_getlast
+**
+** Description      Return a pointer to the last buffer in a queue
+**
+** Parameters:      p_q  - (input) pointer to a queue.
+**
+** Returns          NULL if queue is empty, else buffer address
+**
+*******************************************************************************/
+void *GKI_getlast (BUFFER_Q *p_q)
+{
+    return (p_q->p_last);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_getnext
+**
+** Description      Return a pointer to the next buffer in a queue
+**
+** Parameters:      p_buf  - (input) pointer to the buffer to find the next one from.
+**
+** Returns          NULL if no more buffers in the queue, else next buffer address
+**
+*******************************************************************************/
+void *GKI_getnext (void *p_buf)
+{
+    BUFFER_HDR_T    *p_hdr;
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *) p_buf - BUFFER_HDR_SIZE);
+
+    if (p_hdr->p_next)
+        return ((UINT8 *)p_hdr->p_next + BUFFER_HDR_SIZE);
+    else
+        return (NULL);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         GKI_queue_is_empty
+**
+** Description      Check the status of a queue.
+**
+** Parameters:      p_q  - (input) pointer to a queue.
+**
+** Returns          TRUE if queue is empty, else FALSE
+**
+*******************************************************************************/
+BOOLEAN GKI_queue_is_empty(BUFFER_Q *p_q)
+{
+    return ((BOOLEAN) (p_q->count == 0));
+}
+
+/*******************************************************************************
+**
+** Function         GKI_find_buf_start
+**
+** Description      This function is called with an address inside a buffer,
+**                  and returns the start address ofthe buffer.
+**
+**                  The buffer should be one allocated from one of GKI's pools.
+**
+** Parameters:      p_user_area - (input) address of anywhere in a GKI buffer.
+**
+** Returns          void * - Address of the beginning of the specified buffer if successful,
+**                          otherwise NULL if unsuccessful
+**
+*******************************************************************************/
+void *GKI_find_buf_start (void *p_user_area)
+{
+    UINT16       xx, size;
+    UINT32       yy;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+    UINT8       *p_ua = (UINT8 *)p_user_area;
+
+    for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++)
+    {
+        if ((p_ua > p_cb->pool_start[xx]) && (p_ua < p_cb->pool_end[xx]))
+        {
+            yy = (UINT32)(p_ua - p_cb->pool_start[xx]);
+
+            size = p_cb->pool_size[xx];
+
+            yy = (yy / size) * size;
+
+            return ((void *) (p_cb->pool_start[xx] + yy + sizeof(BUFFER_HDR_T)) );
+        }
+    }
+
+    /* If here, invalid address - not in one of our buffers */
+    GKI_exception (GKI_ERROR_BUF_SIZE_ZERO, "GKI_get_buf_start:: bad addr");
+
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_set_pool_permission
+**
+** Description      This function is called to set or change the permissions for
+**                  the specified pool ID.
+**
+** Parameters       pool_id -       (input) pool ID to be set or changed
+**                  permission -    (input) GKI_PUBLIC_POOL or GKI_RESTRICTED_POOL
+**
+** Returns          GKI_SUCCESS if successful
+**                  GKI_INVALID_POOL if unsuccessful
+**
+*******************************************************************************/
+UINT8 GKI_set_pool_permission(UINT8 pool_id, UINT8 permission)
+{
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    if (pool_id < GKI_NUM_TOTAL_BUF_POOLS)
+    {
+        if (permission == GKI_RESTRICTED_POOL)
+            p_cb->pool_access_mask = (UINT16)(p_cb->pool_access_mask | (1 << pool_id));
+
+        else    /* mark the pool as public */
+            p_cb->pool_access_mask = (UINT16)(p_cb->pool_access_mask & ~(1 << pool_id));
+
+        return (GKI_SUCCESS);
+    }
+    else
+        return (GKI_INVALID_POOL);
+}
+
+/*******************************************************************************
+**
+** Function         gki_add_to_pool_list
+**
+** Description      Adds pool to the pool list which is arranged in the
+**                  order of size
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gki_add_to_pool_list(UINT8 pool_id)
+{
+
+    INT32 i, j;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+     /* Find the position where the specified pool should be inserted into the list */
+    for(i=0; i < p_cb->curr_total_no_of_pools; i++)
+    {
+
+        if(p_cb->freeq[pool_id].size <= p_cb->freeq[ p_cb->pool_list[i] ].size)
+            break;
+    }
+
+    /* Insert the new buffer pool ID into the list of pools */
+    for(j = p_cb->curr_total_no_of_pools; j > i; j--)
+    {
+        p_cb->pool_list[j] = p_cb->pool_list[j-1];
+    }
+
+    p_cb->pool_list[i] = pool_id;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         gki_remove_from_pool_list
+**
+** Description      Removes pool from the pool list. Called when a pool is deleted
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gki_remove_from_pool_list(UINT8 pool_id)
+{
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+    UINT8 i;
+
+    for(i=0; i < p_cb->curr_total_no_of_pools; i++)
+    {
+        if(pool_id == p_cb->pool_list[i])
+            break;
+    }
+
+    while (i < (p_cb->curr_total_no_of_pools - 1))
+    {
+        p_cb->pool_list[i] = p_cb->pool_list[i+1];
+        i++;
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_igetpoolbuf
+**
+** Description      Called by an interrupt service routine to get a free buffer from
+**                  a specific buffer pool.
+**
+** Parameters       pool_id - (input) pool ID to get a buffer out of.
+**
+** Returns          A pointer to the buffer, or NULL if none available
+**
+*******************************************************************************/
+void *GKI_igetpoolbuf (UINT8 pool_id)
+{
+    FREE_QUEUE_T  *Q;
+    BUFFER_HDR_T  *p_hdr;
+
+    if (pool_id >= GKI_NUM_TOTAL_BUF_POOLS)
+        return (NULL);
+
+
+    Q = &gki_cb.com.freeq[pool_id];
+    if(Q->cur_cnt < Q->total)
+    {
+        p_hdr = Q->p_first;
+        Q->p_first = p_hdr->p_next;
+
+        if (!Q->p_first)
+            Q->p_last = NULL;
+
+        if(++Q->cur_cnt > Q->max_cnt)
+            Q->max_cnt = Q->cur_cnt;
+
+        p_hdr->task_id = GKI_get_taskid();
+
+        p_hdr->status  = BUF_STATUS_UNLINKED;
+        p_hdr->p_next  = NULL;
+        p_hdr->Type    = 0;
+
+        return ((void *) ((UINT8 *)p_hdr + BUFFER_HDR_SIZE));
+    }
+
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_poolcount
+**
+** Description      Called by an application to get the total number of buffers
+**                  in the specified buffer pool.
+**
+** Parameters       pool_id - (input) pool ID to get the free count of.
+**
+** Returns          the total number of buffers in the pool
+**
+*******************************************************************************/
+UINT16 GKI_poolcount (UINT8 pool_id)
+{
+    if (pool_id >= GKI_NUM_TOTAL_BUF_POOLS)
+        return (0);
+
+    return (gki_cb.com.freeq[pool_id].total);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_poolfreecount
+**
+** Description      Called by an application to get the number of free buffers
+**                  in the specified buffer pool.
+**
+** Parameters       pool_id - (input) pool ID to get the free count of.
+**
+** Returns          the number of free buffers in the pool
+**
+*******************************************************************************/
+UINT16 GKI_poolfreecount (UINT8 pool_id)
+{
+    FREE_QUEUE_T  *Q;
+
+    if (pool_id >= GKI_NUM_TOTAL_BUF_POOLS)
+        return (0);
+
+    Q  = &gki_cb.com.freeq[pool_id];
+
+    return ((UINT16)(Q->total - Q->cur_cnt));
+}
+
+/*******************************************************************************
+**
+** Function         GKI_change_buf_owner
+**
+** Description      Called to change the task ownership of a buffer.
+**
+** Parameters:      p_buf   - (input) pointer to the buffer
+**                  task_id - (input) task id to change ownership to
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_change_buf_owner (void *p_buf, UINT8 task_id)
+{
+    BUFFER_HDR_T    *p_hdr = (BUFFER_HDR_T *) ((UINT8 *) p_buf - BUFFER_HDR_SIZE);
+
+    p_hdr->task_id = task_id;
+
+    return;
+}
+
+#if (defined(GKI_SEND_MSG_FROM_ISR) &&  GKI_SEND_MSG_FROM_ISR == TRUE)
+/*******************************************************************************
+**
+** Function         GKI_isend_msg
+**
+** Description      Called from interrupt context to send a buffer to a task
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+void GKI_isend_msg (UINT8 task_id, UINT8 mbox, void *msg)
+{
+    BUFFER_HDR_T    *p_hdr;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    /* If task non-existant or not started, drop buffer */
+    if ((task_id >= GKI_MAX_TASKS) || (mbox >= NUM_TASK_MBOX) || (p_cb->OSRdyTbl[task_id] == TASK_DEAD))
+    {
+        GKI_exception(GKI_ERROR_SEND_MSG_BAD_DEST, "Sending to unknown dest");
+        GKI_freebuf (msg);
+        return;
+    }
+
+#if (GKI_ENABLE_BUF_CORRUPTION_CHECK == TRUE)
+    if (gki_chk_buf_damage(msg))
+    {
+        GKI_exception(GKI_ERROR_BUF_CORRUPTED, "Send - Buffer corrupted");
+        return;
+    }
+#endif
+
+#if (GKI_ENABLE_OWNER_CHECK == TRUE)
+    if (gki_chk_buf_owner(msg))
+    {
+        GKI_exception(GKI_ERROR_NOT_BUF_OWNER, "Send by non-owner");
+        return;
+    }
+#endif
+
+    p_hdr = (BUFFER_HDR_T *) ((UINT8 *) msg - BUFFER_HDR_SIZE);
+
+    if (p_hdr->status != BUF_STATUS_UNLINKED)
+    {
+        GKI_exception(GKI_ERROR_SEND_MSG_BUF_LINKED, "Send - buffer linked");
+        return;
+    }
+
+    if (p_cb->OSTaskQFirst[task_id][mbox])
+        p_cb->OSTaskQLast[task_id][mbox]->p_next = p_hdr;
+    else
+        p_cb->OSTaskQFirst[task_id][mbox] = p_hdr;
+
+    p_cb->OSTaskQLast[task_id][mbox] = p_hdr;
+
+    p_hdr->p_next = NULL;
+    p_hdr->status = BUF_STATUS_QUEUED;
+    p_hdr->task_id = task_id;
+
+    GKI_isend_event(task_id, (UINT16)EVENT_MASK(mbox));
+
+    return;
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         GKI_create_pool
+**
+** Description      Called by applications to create a buffer pool.
+**
+** Parameters:      size        - (input) length (in bytes) of each buffer in the pool
+**                  count       - (input) number of buffers to allocate for the pool
+**                  permission  - (input) restricted or public access?
+**                                        (GKI_PUBLIC_POOL or GKI_RESTRICTED_POOL)
+**                  p_mem_pool  - (input) pointer to an OS memory pool, NULL if not provided
+**
+** Returns          the buffer pool ID, which should be used in calls to
+**                  GKI_getpoolbuf(). If a pool could not be created, this
+**                  function returns 0xff.
+**
+*******************************************************************************/
+UINT8 GKI_create_pool (UINT16 size, UINT16 count, UINT8 permission, void *p_mem_pool)
+{
+    UINT8        xx;
+    UINT32       mem_needed;
+    INT32        tempsize = size;
+    tGKI_COM_CB *p_cb = &gki_cb.com;
+
+    /* First make sure the size of each pool has a valid size with room for the header info */
+    if (size > MAX_USER_BUF_SIZE)
+        return (GKI_INVALID_POOL);
+
+    /* First, look for an unused pool */
+    for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++)
+    {
+        if (!p_cb->pool_start[xx])
+            break;
+    }
+
+    if (xx == GKI_NUM_TOTAL_BUF_POOLS)
+        return (GKI_INVALID_POOL);
+
+    /* Ensure an even number of longwords */
+    tempsize = (INT32)ALIGN_POOL(size);
+
+    mem_needed = (tempsize + BUFFER_PADDING_SIZE) * count;
+
+    if (!p_mem_pool)
+        p_mem_pool = GKI_os_malloc(mem_needed);
+
+    if (p_mem_pool)
+    {
+        /* Initialize the new pool */
+        gki_init_free_queue (xx, size, count, p_mem_pool);
+        gki_add_to_pool_list(xx);
+        (void) GKI_set_pool_permission (xx, permission);
+        p_cb->curr_total_no_of_pools++;
+
+        return (xx);
+    }
+    else
+        return (GKI_INVALID_POOL);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_delete_pool
+**
+** Description      Called by applications to delete a buffer pool.  The function
+**                  calls the operating specific function to free the actual memory.
+**                  An exception is generated if an error is detected.
+**
+** Parameters:      pool_id - (input) Id of the poll being deleted.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_delete_pool (UINT8 pool_id)
+{
+    FREE_QUEUE_T    *Q;
+    tGKI_COM_CB     *p_cb = &gki_cb.com;
+
+    if ((pool_id >= GKI_NUM_TOTAL_BUF_POOLS) || (!p_cb->pool_start[pool_id]))
+        return;
+
+    GKI_disable();
+    Q  = &p_cb->freeq[pool_id];
+
+    if (!Q->cur_cnt)
+    {
+        Q->size      = 0;
+        Q->total     = 0;
+        Q->cur_cnt   = 0;
+        Q->max_cnt   = 0;
+        Q->p_first   = NULL;
+        Q->p_last    = NULL;
+
+        GKI_os_free (p_cb->pool_start[pool_id]);
+
+        p_cb->pool_start[pool_id] = NULL;
+        p_cb->pool_end[pool_id]   = NULL;
+        p_cb->pool_size[pool_id]  = 0;
+
+        gki_remove_from_pool_list(pool_id);
+        p_cb->curr_total_no_of_pools--;
+    }
+    else
+        GKI_exception(GKI_ERROR_DELETE_POOL_BAD_QID, "Deleting bad pool");
+
+    GKI_enable();
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_get_pool_bufsize
+**
+** Description      Called by an application to get the size of buffers in a pool
+**
+** Parameters       Pool ID.
+**
+** Returns          the size of buffers in the pool
+**
+*******************************************************************************/
+UINT16 GKI_get_pool_bufsize (UINT8 pool_id)
+{
+    if (pool_id < GKI_NUM_TOTAL_BUF_POOLS)
+        return (gki_cb.com.freeq[pool_id].size);
+
+    return (0);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_poolutilization
+**
+** Description      Called by an application to get the buffer utilization
+**                  in the specified buffer pool.
+**
+** Parameters       pool_id - (input) pool ID to get the free count of.
+**
+** Returns          % of buffers used from 0 to 100
+**
+*******************************************************************************/
+UINT16 GKI_poolutilization (UINT8 pool_id)
+{
+    FREE_QUEUE_T  *Q;
+
+    if (pool_id >= GKI_NUM_TOTAL_BUF_POOLS)
+        return (100);
+
+    Q  = &gki_cb.com.freeq[pool_id];
+
+    if (Q->total == 0)
+        return (100);
+
+    return ((Q->cur_cnt * 100) / Q->total);
+}
+
diff --git a/gki/common/gki_common.h b/gki/common/gki_common.h
new file mode 100644
index 0000000..9bc5005
--- /dev/null
+++ b/gki/common/gki_common.h
@@ -0,0 +1,390 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GKI_COMMON_H
+#define GKI_COMMON_H
+
+#include "gki.h"
+#include "dyn_mem.h"
+
+/* Task States: (For OSRdyTbl) */
+#define TASK_DEAD       0   /* b0000 */
+#define TASK_READY      1   /* b0001 */
+#define TASK_WAIT       2   /* b0010 */
+#define TASK_DELAY      4   /* b0100 */
+#define TASK_SUSPEND    8   /* b1000 */
+
+
+/********************************************************************
+**  Internal Error codes
+*********************************************************************/
+#define GKI_ERROR_BUF_CORRUPTED         0xFFFF
+#define GKI_ERROR_NOT_BUF_OWNER         0xFFFE
+#define GKI_ERROR_FREEBUF_BAD_QID       0xFFFD
+#define GKI_ERROR_FREEBUF_BUF_LINKED    0xFFFC
+#define GKI_ERROR_SEND_MSG_BAD_DEST     0xFFFB
+#define GKI_ERROR_SEND_MSG_BUF_LINKED   0xFFFA
+#define GKI_ERROR_ENQUEUE_BUF_LINKED    0xFFF9
+#define GKI_ERROR_DELETE_POOL_BAD_QID   0xFFF8
+#define GKI_ERROR_BUF_SIZE_TOOBIG       0xFFF7
+#define GKI_ERROR_BUF_SIZE_ZERO         0xFFF6
+#define GKI_ERROR_ADDR_NOT_IN_BUF       0xFFF5
+
+
+/********************************************************************
+**  Misc constants
+*********************************************************************/
+
+#define GKI_MAX_INT32           (0x7fffffffL)
+#define GKI_MAX_TIMESTAMP       (0xffffffffL)
+
+/********************************************************************
+**  Buffer Management Data Structures
+*********************************************************************/
+
+typedef struct _buffer_hdr
+{
+    struct _buffer_hdr *p_next;   /* next buffer in the queue */
+	UINT8   q_id;                 /* id of the queue */
+	UINT8   task_id;              /* task which allocated the buffer*/
+    UINT8   status;               /* FREE, UNLINKED or QUEUED */
+	UINT8   Type;
+} BUFFER_HDR_T;
+
+typedef struct _free_queue
+{
+	BUFFER_HDR_T *p_first;      /* first buffer in the queue */
+    BUFFER_HDR_T *p_last;       /* last buffer in the queue */
+	UINT16		 size;          /* size of the buffers in the pool */
+	UINT16		 total;         /* toatal number of buffers */
+	UINT16		 cur_cnt;       /* number of  buffers currently allocated */
+	UINT16		 max_cnt;       /* maximum number of buffers allocated at any time */
+} FREE_QUEUE_T;
+
+
+/* Buffer related defines
+*/
+#define ALIGN_POOL(pl_size)  ( (((pl_size) + 3) / sizeof(UINT32)) * sizeof(UINT32))
+#define BUFFER_HDR_SIZE     (sizeof(BUFFER_HDR_T))                  /* Offset past header */
+#define BUFFER_PADDING_SIZE (sizeof(BUFFER_HDR_T) + sizeof(UINT32)) /* Header + Magic Number */
+#define MAX_USER_BUF_SIZE   ((UINT16)0xffff - BUFFER_PADDING_SIZE)  /* pool size must allow for header */
+#define MAGIC_NO            0xDDBADDBA
+
+#define BUF_STATUS_FREE     0
+#define BUF_STATUS_UNLINKED 1
+#define BUF_STATUS_QUEUED   2
+
+// btla-specific ++
+#define GKI_USE_DEFERED_ALLOC_BUF_POOLS
+// btla-specific --
+
+/* Exception related structures (Used in debug mode only)
+*/
+#if (GKI_DEBUG == TRUE)
+typedef struct
+{
+	UINT16  type;
+	UINT8   taskid;
+	UINT8   msg[GKI_MAX_EXCEPTION_MSGLEN];
+} EXCEPTION_T;
+#endif
+
+
+/* Put all GKI variables into one control block
+*/
+typedef struct
+{
+    /* Task management variables
+    */
+    /* The stack and stack size are not used on Windows
+    */
+// btla-specific ++
+#if (!defined GKI_USE_DEFERED_ALLOC_BUF_POOLS && (GKI_USE_DYNAMIC_BUFFERS == FALSE))
+// btla-specific --
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 0)
+    UINT8 bufpool0[(ALIGN_POOL(GKI_BUF0_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF0_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 1)
+    UINT8 bufpool1[(ALIGN_POOL(GKI_BUF1_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF1_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 2)
+    UINT8 bufpool2[(ALIGN_POOL(GKI_BUF2_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF2_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 3)
+    UINT8 bufpool3[(ALIGN_POOL(GKI_BUF3_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF3_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 4)
+    UINT8 bufpool4[(ALIGN_POOL(GKI_BUF4_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF4_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 5)
+    UINT8 bufpool5[(ALIGN_POOL(GKI_BUF5_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF5_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 6)
+    UINT8 bufpool6[(ALIGN_POOL(GKI_BUF6_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF6_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 7)
+    UINT8 bufpool7[(ALIGN_POOL(GKI_BUF7_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF7_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 8)
+    UINT8 bufpool8[(ALIGN_POOL(GKI_BUF8_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF8_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 9)
+    UINT8 bufpool9[(ALIGN_POOL(GKI_BUF9_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF9_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 10)
+    UINT8 bufpool10[(ALIGN_POOL(GKI_BUF10_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF10_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 11)
+    UINT8 bufpool11[(ALIGN_POOL(GKI_BUF11_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF11_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 12)
+    UINT8 bufpool12[(ALIGN_POOL(GKI_BUF12_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF12_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 13)
+    UINT8 bufpool13[(ALIGN_POOL(GKI_BUF13_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF13_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 14)
+    UINT8 bufpool14[(ALIGN_POOL(GKI_BUF14_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF14_MAX];
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 15)
+    UINT8 bufpool15[(ALIGN_POOL(GKI_BUF15_SIZE) + BUFFER_PADDING_SIZE) * GKI_BUF15_MAX];
+#endif
+
+#else
+/* Definitions for dynamic buffer use */
+#if (GKI_NUM_FIXED_BUF_POOLS > 0)
+    UINT8 *bufpool0;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 1)
+    UINT8 *bufpool1;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 2)
+    UINT8 *bufpool2;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 3)
+    UINT8 *bufpool3;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 4)
+    UINT8 *bufpool4;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 5)
+    UINT8 *bufpool5;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 6)
+    UINT8 *bufpool6;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 7)
+    UINT8 *bufpool7;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 8)
+    UINT8 *bufpool8;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 9)
+    UINT8 *bufpool9;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 10)
+    UINT8 *bufpool10;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 11)
+    UINT8 *bufpool11;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 12)
+    UINT8 *bufpool12;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 13)
+    UINT8 *bufpool13;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 14)
+    UINT8 *bufpool14;
+#endif
+
+#if (GKI_NUM_FIXED_BUF_POOLS > 15)
+    UINT8 *bufpool15;
+#endif
+
+#endif
+
+    UINT8  *OSStack[GKI_MAX_TASKS];         /* pointer to beginning of stack */
+    UINT16  OSStackSize[GKI_MAX_TASKS];     /* stack size available to each task */
+
+
+    INT8   *OSTName[GKI_MAX_TASKS];         /* name of the task */
+
+    UINT8   OSRdyTbl[GKI_MAX_TASKS];        /* current state of the task */
+    UINT16  OSWaitEvt[GKI_MAX_TASKS];       /* events that have to be processed by the task */
+    UINT16  OSWaitForEvt[GKI_MAX_TASKS];    /* events the task is waiting for*/
+
+    UINT32  OSTicks;                        /* system ticks from start */
+    UINT32  OSIdleCnt;                      /* idle counter */
+    INT16   OSDisableNesting;               /* counter to keep track of interrupt disable nesting */
+    INT16   OSLockNesting;                  /* counter to keep track of sched lock nesting */
+    INT16   OSIntNesting;                   /* counter to keep track of interrupt nesting */
+
+    /* Timer related variables
+    */
+    INT32   OSTicksTilExp;      /* Number of ticks till next timer expires */
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+    UINT32  OSTicksTilStop;     /* inactivity delay timer; OS Ticks till stopping system tick */
+#endif
+    INT32   OSNumOrigTicks;     /* Number of ticks between last timer expiration to the next one */
+
+    INT32   OSWaitTmr   [GKI_MAX_TASKS];  /* ticks the task has to wait, for specific events */
+
+    /* Only take up space timers used in the system (GKI_NUM_TIMERS defined in target.h) */
+#if (GKI_NUM_TIMERS > 0)
+    INT32   OSTaskTmr0  [GKI_MAX_TASKS];
+    INT32   OSTaskTmr0R [GKI_MAX_TASKS];
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+    INT32   OSTaskTmr1  [GKI_MAX_TASKS];
+    INT32   OSTaskTmr1R [GKI_MAX_TASKS];
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+    INT32   OSTaskTmr2  [GKI_MAX_TASKS];
+    INT32   OSTaskTmr2R [GKI_MAX_TASKS];
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+    INT32   OSTaskTmr3  [GKI_MAX_TASKS];
+    INT32   OSTaskTmr3R [GKI_MAX_TASKS];
+#endif
+
+
+
+    /* Buffer related variables
+    */
+    BUFFER_HDR_T    *OSTaskQFirst[GKI_MAX_TASKS][NUM_TASK_MBOX]; /* array of pointers to the first event in the task mailbox */
+    BUFFER_HDR_T    *OSTaskQLast [GKI_MAX_TASKS][NUM_TASK_MBOX]; /* array of pointers to the last event in the task mailbox */
+
+    /* Define the buffer pool management variables
+    */
+    FREE_QUEUE_T    freeq[GKI_NUM_TOTAL_BUF_POOLS];
+
+    UINT16   pool_buf_size[GKI_NUM_TOTAL_BUF_POOLS];
+    UINT16   pool_max_count[GKI_NUM_TOTAL_BUF_POOLS];
+    UINT16   pool_additions[GKI_NUM_TOTAL_BUF_POOLS];
+
+    /* Define the buffer pool start addresses
+    */
+    UINT8   *pool_start[GKI_NUM_TOTAL_BUF_POOLS];   /* array of pointers to the start of each buffer pool */
+    UINT8   *pool_end[GKI_NUM_TOTAL_BUF_POOLS];     /* array of pointers to the end of each buffer pool */
+    UINT16   pool_size[GKI_NUM_TOTAL_BUF_POOLS];    /* actual size of the buffers in a pool */
+
+    /* Define the buffer pool access control variables */
+    void        *p_user_mempool;                    /* User O/S memory pool */
+    UINT16      pool_access_mask;                   /* Bits are set if the corresponding buffer pool is a restricted pool */
+    UINT8       pool_list[GKI_NUM_TOTAL_BUF_POOLS]; /* buffer pools arranged in the order of size */
+    UINT8       curr_total_no_of_pools;             /* number of fixed buf pools + current number of dynamic pools */
+
+    BOOLEAN     timer_nesting;                      /* flag to prevent timer interrupt nesting */
+
+    /* Time queue arrays */
+    TIMER_LIST_Q *timer_queues[GKI_MAX_TIMER_QUEUES];
+    /* System tick callback */
+    SYSTEM_TICK_CBACK *p_tick_cb;
+    BOOLEAN     system_tick_running;                /* TRUE if system tick is running. Valid only if p_tick_cb is not NULL */
+
+#if (GKI_DEBUG == TRUE)
+    UINT16      ExceptionCnt;                       /* number of GKI exceptions that have happened */
+    EXCEPTION_T Exception[GKI_MAX_EXCEPTION];
+#endif
+
+} tGKI_COM_CB;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Internal GKI function prototypes
+*/
+GKI_API extern BOOLEAN   gki_chk_buf_damage(void *);
+extern BOOLEAN   gki_chk_buf_owner(void *);
+extern void      gki_buffer_init (void);
+extern void      gki_timers_init(void);
+extern void      gki_adjust_timer_count (INT32);
+
+#ifdef GKI_USE_DEFERED_ALLOC_BUF_POOLS
+extern void      gki_dealloc_free_queue(void);
+#endif
+
+extern void    OSStartRdy(void);
+extern void	   OSCtxSw(void);
+extern void	   OSIntCtxSw(void);
+extern void    OSSched(void);
+extern void    OSIntEnter(void);
+extern void    OSIntExit(void);
+
+
+/* Debug aids
+*/
+typedef void  (*FP_PRINT)(char *, ...);
+
+#if (GKI_DEBUG == TRUE)
+
+typedef void  (*PKT_PRINT)(UINT8 *, UINT16);
+
+extern void gki_print_task(FP_PRINT);
+extern void gki_print_exception(FP_PRINT);
+extern void gki_print_timer(FP_PRINT);
+extern void gki_print_stack(FP_PRINT);
+extern void gki_print_buffer(FP_PRINT);
+extern void gki_print_buffer_statistics(FP_PRINT, INT16);
+GKI_API extern void gki_print_used_bufs (FP_PRINT, UINT8);
+extern void gki_dump(UINT8 *, UINT16, FP_PRINT);
+extern void gki_dump2(UINT16 *, UINT16, FP_PRINT);
+extern void gki_dump4(UINT32 *, UINT16, FP_PRINT);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/gki/common/gki_debug.c b/gki/common/gki_debug.c
new file mode 100644
index 0000000..46d7e38
--- /dev/null
+++ b/gki/common/gki_debug.c
@@ -0,0 +1,354 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "gki_int.h"
+
+#if (GKI_DEBUG == TRUE)
+
+const INT8 * const OSTaskStates[] =
+{
+    (INT8 *)"DEAD",  /* 0 */
+    (INT8 *)"REDY",  /* 1 */
+    (INT8 *)"WAIT",  /* 2 */
+    (INT8 *)"",
+    (INT8 *)"DELY",  /* 4 */
+    (INT8 *)"",
+    (INT8 *)"",
+    (INT8 *)"",
+    (INT8 *)"SUSP",  /* 8 */
+};
+
+
+/*******************************************************************************
+**
+** Function         GKI_PrintBufferUsage
+**
+** Description      Displays Current Buffer Pool summary
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_PrintBufferUsage(UINT8 *p_num_pools, UINT16 *p_cur_used)
+{
+    int i;
+    FREE_QUEUE_T    *p;
+    UINT8   num = gki_cb.com.curr_total_no_of_pools;
+    UINT16   cur[GKI_NUM_TOTAL_BUF_POOLS];
+
+    GKI_TRACE_0("");
+    GKI_TRACE_0("--- GKI Buffer Pool Summary (R - restricted, P - public) ---");
+
+    GKI_TRACE_0("POOL     SIZE  USED  MAXU  TOTAL");
+    GKI_TRACE_0("------------------------------");
+    for (i = 0; i < gki_cb.com.curr_total_no_of_pools; i++)
+    {
+        p = &gki_cb.com.freeq[i];
+        if ((1 << i) & gki_cb.com.pool_access_mask)
+        {
+            GKI_TRACE_5("%02d: (R), %4d, %3d, %3d, %3d",
+                        i, p->size, p->cur_cnt, p->max_cnt, p->total);
+        }
+        else
+        {
+            GKI_TRACE_5("%02d: (P), %4d, %3d, %3d, %3d",
+                        i, p->size, p->cur_cnt, p->max_cnt, p->total);
+        }
+        cur[i] = p->cur_cnt;
+    }
+    if (p_num_pools)
+        *p_num_pools = num;
+    if (p_cur_used)
+        memcpy(p_cur_used, cur, num*2);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_PrintBuffer
+**
+** Description      Called internally by OSS to print the buffer pools
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_PrintBuffer(void)
+{
+    UINT16 i;
+    for(i=0; i<GKI_NUM_TOTAL_BUF_POOLS; i++)
+	{
+		GKI_TRACE_5("pool:%4u free %4u cur %3u max %3u  total%3u", i, gki_cb.com.freeq[i].size,
+                    gki_cb.com.freeq[i].cur_cnt, gki_cb.com.freeq[i].max_cnt, gki_cb.com.freeq[i].total);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gki_calc_stack
+**
+** Description      This function tries to calculate the amount of
+**                  stack used by looking non magic num. Magic num is consider
+**                  the first byte in the stack.
+**
+** Returns          the number of unused byte on the stack. 4 in case of stack overrun
+**
+*******************************************************************************/
+UINT16 gki_calc_stack (UINT8 task)
+{
+    int    j, stacksize;
+    UINT32 MagicNum;
+    UINT32 *p;
+
+    stacksize = (int) gki_cb.com.OSStackSize[task];
+    p = (UINT32 *)gki_cb.com.OSStack[task]; /* assume stack is aligned, */
+    MagicNum = *p;
+
+    for(j = 0; j < stacksize; j++)
+    {
+        if(*p++ != MagicNum) break;
+    }
+
+    return (j * sizeof(UINT32));
+}
+
+/*******************************************************************************
+**
+** Function         GKI_print_task
+**
+** Description      Print task stack usage.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_print_task(void)
+{
+#ifdef _BT_WIN32
+	GKI_TRACE_0("Service not available under insight");
+#else
+    UINT8 TaskId;
+
+	GKI_TRACE_0("TID TASKNAME STATE FREE_STACK  STACK");
+	for(TaskId=0; TaskId < GKI_MAX_TASKS; TaskId++)
+	{
+		if (gki_cb.com.OSRdyTbl[TaskId] != TASK_DEAD)
+		{
+			GKI_TRACE_5("%2u   %-8s %-5s  0x%04X     0x%04X Bytes",
+				(UINT16)TaskId,  gki_cb.com.OSTName[TaskId],
+				OSTaskStates[gki_cb.com.OSRdyTbl[TaskId]],
+                gki_calc_stack(TaskId), gki_cb.com.OSStackSize[TaskId]);
+
+        }
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         gki_print_buffer_statistics
+**
+** Description      Called internally by OSS to print the buffer pools statistics
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_print_buffer_statistics(FP_PRINT print, INT16 pool)
+{
+    UINT16           i;
+    BUFFER_HDR_T    *hdr;
+    UINT16           size,act_size,maxbuffs;
+    UINT32           *magic;
+
+    if (pool > GKI_NUM_TOTAL_BUF_POOLS || pool < 0)
+    {
+        print("Not a valid Buffer pool\n");
+        return;
+    }
+
+    size = gki_cb.com.freeq[pool].size;
+    maxbuffs = gki_cb.com.freeq[pool].total;
+    act_size = size + BUFFER_PADDING_SIZE;
+    print("Buffer Pool[%u] size=%u cur_cnt=%u max_cnt=%u  total=%u\n",
+        pool, gki_cb.com.freeq[pool].size,
+        gki_cb.com.freeq[pool].cur_cnt, gki_cb.com.freeq[pool].max_cnt, gki_cb.com.freeq[pool].total);
+
+    print("      Owner  State    Sanity\n");
+    print("----------------------------\n");
+    hdr = (BUFFER_HDR_T *)(gki_cb.com.pool_start[pool]);
+    for(i=0; i<maxbuffs; i++)
+    {
+        magic = (UINT32 *)((UINT8 *)hdr + BUFFER_HDR_SIZE + size);
+        print("%3d: 0x%02x %4d %10s\n", i, hdr->task_id, hdr->status, (*magic == MAGIC_NO)?"OK":"CORRUPTED");
+        hdr          = (BUFFER_HDR_T *)((UINT8 *)hdr + act_size);
+    }
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         gki_print_used_bufs
+**
+** Description      Dumps used buffers in the particular pool
+**
+*******************************************************************************/
+GKI_API void gki_print_used_bufs (FP_PRINT print, UINT8 pool_id)
+{
+    UINT8        *p_start;
+    UINT16       buf_size;
+    UINT16       num_bufs;
+    BUFFER_HDR_T *p_hdr;
+    UINT16       i;
+    UINT32         *magic;
+    UINT16       *p;
+
+
+    if ((pool_id >= GKI_NUM_TOTAL_BUF_POOLS) || (gki_cb.com.pool_start[pool_id] != 0))
+    {
+        print("Not a valid Buffer pool\n");
+        return;
+    }
+
+    p_start = gki_cb.com.pool_start[pool_id];
+    buf_size = gki_cb.com.freeq[pool_id].size + BUFFER_PADDING_SIZE;
+    num_bufs = gki_cb.com.freeq[pool_id].total;
+
+    for (i = 0; i < num_bufs; i++, p_start += buf_size)
+    {
+        p_hdr = (BUFFER_HDR_T *)p_start;
+        magic = (UINT32 *)((UINT8 *)p_hdr + buf_size - sizeof(UINT32));
+        p     = (UINT16 *) p_hdr;
+
+        if (p_hdr->status != BUF_STATUS_FREE)
+        {
+            print ("%d:0x%x (Q:%d,Task:%s,Stat:%d,%s) %04x %04x %04x %04x %04x %04x %04x %04x\n",
+                i, p_hdr,
+                p_hdr->q_id,
+                GKI_map_taskname(p_hdr->task_id),
+                p_hdr->status,
+                (*magic == MAGIC_NO)? "OK" : "CORRUPTED",
+                p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         gki_print_task
+**
+** Description      This function prints the task states.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_print_task (FP_PRINT print)
+{
+    UINT8 i;
+
+    print("TID VID TASKNAME STATE WAIT WAITFOR TIMEOUT STACK\n");
+    print("-------------------------------------------------\n");
+    for(i=0; i<GKI_MAX_TASKS; i++)
+    {
+        if (gki_cb.com.OSRdyTbl[i] != TASK_DEAD)
+        {
+            print("%2u  %-8s %-5s %04X    %04X %7u %u/%u Bytes\n",
+                (UINT16)i,  gki_cb.com.OSTName[i],
+                OSTaskStates[gki_cb.com.OSRdyTbl[i]],
+                gki_cb.com.OSWaitEvt[i], gki_cb.com.OSWaitForEvt[i],
+                gki_cb.com.OSWaitTmr[i], gki_calc_stack(i), gki_cb.com.OSStackSize[i]);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         gki_print_exception
+**
+** Description      This function prints the exception information.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_print_exception(FP_PRINT print)
+{
+    UINT16 i;
+    EXCEPTION_T *pExp;
+
+    print ("GKI Exceptions:\n");
+    for (i = 0; i < gki_cb.com.ExceptionCnt; i++)
+    {
+        pExp =     &gki_cb.com.Exception[i];
+        print("%d: Type=%d, Task=%d: %s\n", i,
+            (INT32)pExp->type, (INT32)pExp->taskid, (INT8 *)pExp->msg);
+    }
+}
+
+
+/*****************************************************************************/
+void gki_dump (UINT8 *s, UINT16 len, FP_PRINT print)
+{
+    UINT16 i, j;
+
+    for(i=0, j=0; i<len; i++)
+    {
+        if(j == 0)
+            print("\n%lX: %02X, ", &s[i], s[i]);
+        else if(j == 7)
+            print("%02X,  ", s[i]);
+        else
+            print("%02X, ", s[i]);
+        if(++j == 16)
+            j=0;
+    }
+    print("\n");
+}
+
+void gki_dump2 (UINT16 *s, UINT16 len, FP_PRINT print)
+{
+    UINT16 i, j;
+
+    for(i=0, j=0; i<len; i++)
+    {
+        if(j == 0)
+            print("\n%lX: %04X, ", &s[i], s[i]);
+        else
+            print("%04X, ", s[i]);
+        if(++j == 8)
+            j=0;
+    }
+    print("\n");
+}
+
+void gki_dump4 (UINT32 *s, UINT16 len, FP_PRINT print)
+{
+    UINT16 i, j;
+
+    for(i=0, j=0; i<len; i++)
+    {
+        if(j == 0)
+            print("\n%lX: %08lX, ", &s[i], s[i]);
+        else
+            print("%08lX, ", s[i]);
+        if(++j == 4)
+            j=0;
+    }
+    print("\n");
+}
+
+
+#endif
diff --git a/gki/common/gki_inet.h b/gki/common/gki_inet.h
new file mode 100644
index 0000000..6640931
--- /dev/null
+++ b/gki/common/gki_inet.h
@@ -0,0 +1,47 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GKI_INET_H
+#define GKI_INET_H
+
+#include "data_types.h"
+
+#define htons	ntohs
+#define htonl	ntohl
+
+#define htonets	nettohs
+#define htonetl	nettohl
+
+#if BIG_ENDIAN == TRUE
+#define ntohs(n) (n)
+#define ntohl(n) (n)
+#define ntoh6(n) (n)
+
+#define nettohs(n) (n)
+#define nettohl(n) (n)
+#else
+extern UINT16 ntohs(UINT16 n);
+extern UINT32 ntohl(UINT32 n);
+extern UINT8 *ntoh6(UINT8 *p);
+
+#define nettohs(n) ((UINT16)((((n) << 8) & 0xff00) | (((n) >> 8) & 0x00ff)))
+#define nettohl(n) ((((n) & 0x000000ff) << 24) | (((n) << 8) & 0x00ff0000) | \
+                   (((n) >> 8) & 0x0000ff00) | (((n) >> 24) & 0x000000ff))
+#endif
+
+#endif /* GKI_INET_H */
+
diff --git a/gki/common/gki_time.c b/gki/common/gki_time.c
new file mode 100644
index 0000000..a9af8fa
--- /dev/null
+++ b/gki/common/gki_time.c
@@ -0,0 +1,1023 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+
+#include "gki_int.h"
+
+#ifndef BT_ERROR_TRACE_0
+#define BT_ERROR_TRACE_0(l,m)
+#endif
+
+/* Make sure that this has been defined in target.h */
+#ifndef GKI_NUM_TIMERS
+#error  NO TIMERS: Must define at least 1 timer in the system!
+#endif
+
+
+#define GKI_NO_NEW_TMRS_STARTED (0x7fffffffL)   /* Largest signed positive timer count */
+#define GKI_UNUSED_LIST_ENTRY   (0x80000000L)   /* Marks an unused timer list entry (initial value) */
+#define GKI_MAX_INT32           (0x7fffffffL)
+
+/*******************************************************************************
+**
+** Function         gki_timers_init
+**
+** Description      This internal function is called once at startup to initialize
+**                  all the timer structures.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_timers_init(void)
+{
+    UINT8   tt;
+
+    gki_cb.com.OSTicksTilExp = 0;       /* Remaining time (of OSTimeCurTimeout) before next timer expires */
+    gki_cb.com.OSNumOrigTicks = 0;
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+    gki_cb.com.OSTicksTilStop = 0;      /* clear inactivity delay timer */
+#endif
+
+    for (tt = 0; tt < GKI_MAX_TASKS; tt++)
+    {
+        gki_cb.com.OSWaitTmr   [tt] = 0;
+
+#if (GKI_NUM_TIMERS > 0)
+        gki_cb.com.OSTaskTmr0  [tt] = 0;
+        gki_cb.com.OSTaskTmr0R [tt] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        gki_cb.com.OSTaskTmr1  [tt] = 0;
+        gki_cb.com.OSTaskTmr1R [tt] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        gki_cb.com.OSTaskTmr2  [tt] = 0;
+        gki_cb.com.OSTaskTmr2R [tt] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        gki_cb.com.OSTaskTmr3  [tt] = 0;
+        gki_cb.com.OSTaskTmr3R [tt] = 0;
+#endif
+    }
+
+    for (tt = 0; tt < GKI_MAX_TIMER_QUEUES; tt++)
+    {
+        gki_cb.com.timer_queues[tt] = NULL;
+    }
+
+    gki_cb.com.p_tick_cb = NULL;
+    gki_cb.com.system_tick_running = FALSE;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         gki_timers_is_timer_running
+**
+** Description      This internal function is called to test if any gki timer are running
+**
+**
+** Returns          TRUE if at least one time is running in the system, FALSE else.
+**
+*******************************************************************************/
+BOOLEAN gki_timers_is_timer_running(void)
+{
+    UINT8   tt;
+    for (tt = 0; tt < GKI_MAX_TASKS; tt++)
+    {
+
+#if (GKI_NUM_TIMERS > 0)
+        if(gki_cb.com.OSTaskTmr0  [tt])
+        {
+            return TRUE;
+        }
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        if(gki_cb.com.OSTaskTmr1  [tt] )
+        {
+            return TRUE;
+        }
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        if(gki_cb.com.OSTaskTmr2  [tt] )
+        {
+            return TRUE;
+        }
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        if(gki_cb.com.OSTaskTmr3  [tt] )
+        {
+            return TRUE;
+        }
+#endif
+    }
+
+    return FALSE;
+
+}
+
+/*******************************************************************************
+**
+** Function         GKI_get_tick_count
+**
+** Description      This function returns the current system ticks
+**
+** Returns          The current number of system ticks
+**
+*******************************************************************************/
+UINT32  GKI_get_tick_count(void)
+{
+    return gki_cb.com.OSTicks;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_ready_to_sleep
+**
+** Description      This function returns the number of system ticks until the
+**                  next timer will expire.  It is typically called by a power
+**                  savings manager to find out how long it can have the system
+**                  sleep before it needs to service the next entry.
+**
+** Parameters:      None
+**
+** Returns          Number of ticks til the next timer expires
+**                  Note: the value is a signed  value.  This value should be
+**                      compared to x > 0, to avoid misinterpreting negative tick
+**                      values.
+**
+*******************************************************************************/
+INT32    GKI_ready_to_sleep (void)
+{
+    return (gki_cb.com.OSTicksTilExp);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_start_timer
+**
+** Description      An application can call this function to start one of
+**                  it's four general purpose timers. Any of the four timers
+**                  can be 1-shot or continuous. If a timer is already running,
+**                  it will be reset to the new parameters.
+**
+** Parameters       tnum            - (input) timer number to be started (TIMER_0,
+**                                              TIMER_1, TIMER_2, or TIMER_3)
+**                  ticks           - (input) the number of system ticks til the
+**                                              timer expires.
+**                  is_continuous   - (input) TRUE if timer restarts automatically,
+**                                              else FALSE if it is a 'one-shot'.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_start_timer (UINT8 tnum, INT32 ticks, BOOLEAN is_continuous)
+{
+    INT32   reload;
+    INT32   orig_ticks;
+    UINT8   task_id = GKI_get_taskid();
+    BOOLEAN bad_timer = FALSE;
+
+    if (ticks <= 0)
+        ticks = 1;
+
+    orig_ticks = ticks;     /* save the ticks in case adjustment is necessary */
+
+
+    /* If continuous timer, set reload, else set it to 0 */
+    if (is_continuous)
+        reload = ticks;
+    else
+        reload = 0;
+
+    GKI_disable();
+
+    if(gki_timers_is_timer_running() == FALSE)
+    {
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+        /* if inactivity delay timer is not running, start system tick */
+        if(gki_cb.com.OSTicksTilStop == 0)
+        {
+#endif
+            if(gki_cb.com.p_tick_cb)
+            {
+                /* start system tick */
+                gki_cb.com.system_tick_running = TRUE;
+                (gki_cb.com.p_tick_cb) (TRUE);
+            }
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+        }
+        else
+        {
+            /* clear inactivity delay timer */
+            gki_cb.com.OSTicksTilStop = 0;
+        }
+#endif
+    }
+    /* Add the time since the last task timer update.
+    ** Note that this works when no timers are active since
+    ** both OSNumOrigTicks and OSTicksTilExp are 0.
+    */
+    if (GKI_MAX_INT32 - (gki_cb.com.OSNumOrigTicks - gki_cb.com.OSTicksTilExp) > ticks)
+    {
+        ticks += gki_cb.com.OSNumOrigTicks - gki_cb.com.OSTicksTilExp;
+    }
+    else
+        ticks = GKI_MAX_INT32;
+
+    switch (tnum)
+    {
+#if (GKI_NUM_TIMERS > 0)
+        case TIMER_0:
+            gki_cb.com.OSTaskTmr0R[task_id] = reload;
+            gki_cb.com.OSTaskTmr0 [task_id] = ticks;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        case TIMER_1:
+            gki_cb.com.OSTaskTmr1R[task_id] = reload;
+            gki_cb.com.OSTaskTmr1 [task_id] = ticks;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        case TIMER_2:
+            gki_cb.com.OSTaskTmr2R[task_id] = reload;
+            gki_cb.com.OSTaskTmr2 [task_id] = ticks;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        case TIMER_3:
+            gki_cb.com.OSTaskTmr3R[task_id] = reload;
+            gki_cb.com.OSTaskTmr3 [task_id] = ticks;
+            break;
+#endif
+        default:
+            bad_timer = TRUE;       /* Timer number is bad, so do not use */
+    }
+
+    /* Update the expiration timeout if a legitimate timer */
+    if (!bad_timer)
+    {
+        /* Only update the timeout value if it is less than any other newly started timers */
+        gki_adjust_timer_count (orig_ticks);
+    }
+
+    GKI_enable();
+
+}
+
+/*******************************************************************************
+**
+** Function         GKI_stop_timer
+**
+** Description      An application can call this function to stop one of
+**                  it's four general purpose timers. There is no harm in
+**                  stopping a timer that is already stopped.
+**
+** Parameters       tnum            - (input) timer number to be started (TIMER_0,
+**                                              TIMER_1, TIMER_2, or TIMER_3)
+** Returns          void
+**
+*******************************************************************************/
+void GKI_stop_timer (UINT8 tnum)
+{
+    UINT8  task_id = GKI_get_taskid();
+
+    switch (tnum)
+    {
+#if (GKI_NUM_TIMERS > 0)
+        case TIMER_0:
+            gki_cb.com.OSTaskTmr0R[task_id] = 0;
+            gki_cb.com.OSTaskTmr0 [task_id] = 0;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        case TIMER_1:
+            gki_cb.com.OSTaskTmr1R[task_id] = 0;
+            gki_cb.com.OSTaskTmr1 [task_id] = 0;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        case TIMER_2:
+            gki_cb.com.OSTaskTmr2R[task_id] = 0;
+            gki_cb.com.OSTaskTmr2 [task_id] = 0;
+            break;
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        case TIMER_3:
+            gki_cb.com.OSTaskTmr3R[task_id] = 0;
+            gki_cb.com.OSTaskTmr3 [task_id] = 0;
+            break;
+#endif
+    }
+
+    GKI_disable();
+
+    if (gki_timers_is_timer_running() == FALSE)
+    {
+        if (gki_cb.com.p_tick_cb)
+        {
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+            /* if inactivity delay timer is not running */
+            if ((gki_cb.com.system_tick_running)&&(gki_cb.com.OSTicksTilStop == 0))
+            {
+                /* set inactivity delay timer */
+                /* when timer expires, system tick will be stopped */
+                gki_cb.com.OSTicksTilStop = GKI_DELAY_STOP_SYS_TICK;
+            }
+#else
+            gki_cb.com.system_tick_running = FALSE;
+            gki_cb.com.p_tick_cb(FALSE); /* stop system tick */
+#endif
+        }
+    }
+
+    GKI_enable();
+
+
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_timer_update
+**
+** Description      This function is called by an OS to drive the GKI's timers.
+**                  It is typically called at every system tick to
+**                  update the timers for all tasks, and check for timeouts.
+**
+**                  Note: It has been designed to also allow for variable tick updates
+**                      so that systems with strict power savings requirements can
+**                      have the update occur at variable intervals.
+**
+** Parameters:      ticks_since_last_update - (input) This is the number of TICKS that have
+**                          occurred since the last time GKI_timer_update was called.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_timer_update (INT32 ticks_since_last_update)
+{
+    UINT8   task_id;
+    long    next_expiration;        /* Holds the next soonest expiration time after this update */
+
+    /* Increment the number of ticks used for time stamps */
+    gki_cb.com.OSTicks += ticks_since_last_update;
+
+    /* If any timers are running in any tasks, decrement the remaining time til
+     * the timer updates need to take place (next expiration occurs)
+     */
+    gki_cb.com.OSTicksTilExp -= ticks_since_last_update;
+
+    /* Don't allow timer interrupt nesting */
+    if (gki_cb.com.timer_nesting)
+        return;
+
+    gki_cb.com.timer_nesting = 1;
+
+#if (defined(GKI_DELAY_STOP_SYS_TICK) && (GKI_DELAY_STOP_SYS_TICK > 0))
+    /* if inactivity delay timer is set and expired */
+    if (gki_cb.com.OSTicksTilStop)
+    {
+        if( gki_cb.com.OSTicksTilStop <= (UINT32)ticks_since_last_update )
+        {
+            if(gki_cb.com.p_tick_cb)
+            {
+                gki_cb.com.system_tick_running = FALSE;
+                (gki_cb.com.p_tick_cb) (FALSE); /* stop system tick */
+            }
+            gki_cb.com.OSTicksTilStop = 0;      /* clear inactivity delay timer */
+            gki_cb.com.timer_nesting = 0;
+            return;
+        }
+        else
+            gki_cb.com.OSTicksTilStop -= ticks_since_last_update;
+    }
+#endif
+
+    /* No need to update the ticks if no timeout has occurred */
+    if (gki_cb.com.OSTicksTilExp > 0)
+    {
+        gki_cb.com.timer_nesting = 0;
+        return;
+    }
+
+    next_expiration = GKI_NO_NEW_TMRS_STARTED;
+
+    /* If here then gki_cb.com.OSTicksTilExp <= 0. If negative, then increase gki_cb.com.OSNumOrigTicks
+       to account for the difference so timer updates below are decremented by the full number
+       of ticks. gki_cb.com.OSNumOrigTicks is reset at the bottom of this function so changing this
+       value only affects the timer updates below
+     */
+    gki_cb.com.OSNumOrigTicks -= gki_cb.com.OSTicksTilExp;
+
+#if GKI_TIMER_LIST_NOPREEMPT == TRUE
+    /* Protect this section because if a GKI_timer_stop happens between:
+     *   - gki_cb.com.OSTaskTmr0[task_id] -= gki_cb.com.OSNumOrigTicks;
+     *   - gki_cb.com.OSTaskTmr0[task_id] = gki_cb.com.OSTaskTmr0R[task_id];
+     * then the timer may appear stopped while it is about to be reloaded.
+     * Note: Not needed if this function cannot be preempted (typical).
+     */
+    GKI_disable();
+#endif
+
+    /* Check for OS Task Timers */
+    for (task_id = 0; task_id < GKI_MAX_TASKS; task_id++)
+    {
+        if (gki_cb.com.OSWaitTmr[task_id] > 0) /* If timer is running */
+        {
+            gki_cb.com.OSWaitTmr[task_id] -= gki_cb.com.OSNumOrigTicks;
+            if (gki_cb.com.OSWaitTmr[task_id] <= 0)
+            {
+                /* Timer Expired */
+                gki_cb.com.OSRdyTbl[task_id] = TASK_READY;
+            }
+        }
+
+#if (GKI_NUM_TIMERS > 0)
+         /* If any timer is running, decrement */
+        if (gki_cb.com.OSTaskTmr0[task_id] > 0)
+        {
+            gki_cb.com.OSTaskTmr0[task_id] -= gki_cb.com.OSNumOrigTicks;
+
+            if (gki_cb.com.OSTaskTmr0[task_id] <= 0)
+            {
+                /* Reload timer and set Timer 0 Expired event mask */
+                gki_cb.com.OSTaskTmr0[task_id] = gki_cb.com.OSTaskTmr0R[task_id];
+
+#if (defined(GKI_TIMER_UPDATES_FROM_ISR) &&  GKI_TIMER_UPDATES_FROM_ISR == TRUE)
+                GKI_isend_event (task_id, TIMER_0_EVT_MASK);
+#else
+                GKI_send_event (task_id, TIMER_0_EVT_MASK);
+#endif
+            }
+        }
+
+        /* Check to see if this timer is the next one to expire */
+        if (gki_cb.com.OSTaskTmr0[task_id] > 0 && gki_cb.com.OSTaskTmr0[task_id] < next_expiration)
+            next_expiration = gki_cb.com.OSTaskTmr0[task_id];
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+         /* If any timer is running, decrement */
+        if (gki_cb.com.OSTaskTmr1[task_id] > 0)
+        {
+            gki_cb.com.OSTaskTmr1[task_id] -= gki_cb.com.OSNumOrigTicks;
+
+            if (gki_cb.com.OSTaskTmr1[task_id] <= 0)
+            {
+                /* Reload timer and set Timer 1 Expired event mask */
+                gki_cb.com.OSTaskTmr1[task_id] = gki_cb.com.OSTaskTmr1R[task_id];
+
+#if (defined(GKI_TIMER_UPDATES_FROM_ISR) &&  GKI_TIMER_UPDATES_FROM_ISR == TRUE)
+                GKI_isend_event (task_id, TIMER_1_EVT_MASK);
+#else
+                GKI_send_event (task_id, TIMER_1_EVT_MASK);
+#endif
+            }
+        }
+
+        /* Check to see if this timer is the next one to expire */
+        if (gki_cb.com.OSTaskTmr1[task_id] > 0 && gki_cb.com.OSTaskTmr1[task_id] < next_expiration)
+            next_expiration = gki_cb.com.OSTaskTmr1[task_id];
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+         /* If any timer is running, decrement */
+        if (gki_cb.com.OSTaskTmr2[task_id] > 0)
+        {
+            gki_cb.com.OSTaskTmr2[task_id] -= gki_cb.com.OSNumOrigTicks;
+
+            if (gki_cb.com.OSTaskTmr2[task_id] <= 0)
+            {
+                /* Reload timer and set Timer 2 Expired event mask */
+                gki_cb.com.OSTaskTmr2[task_id] = gki_cb.com.OSTaskTmr2R[task_id];
+
+#if (defined(GKI_TIMER_UPDATES_FROM_ISR) &&  GKI_TIMER_UPDATES_FROM_ISR == TRUE)
+                GKI_isend_event (task_id, TIMER_2_EVT_MASK);
+#else
+                GKI_send_event (task_id, TIMER_2_EVT_MASK);
+#endif
+            }
+        }
+
+        /* Check to see if this timer is the next one to expire */
+        if (gki_cb.com.OSTaskTmr2[task_id] > 0 && gki_cb.com.OSTaskTmr2[task_id] < next_expiration)
+            next_expiration = gki_cb.com.OSTaskTmr2[task_id];
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+         /* If any timer is running, decrement */
+        if (gki_cb.com.OSTaskTmr3[task_id] > 0)
+        {
+            gki_cb.com.OSTaskTmr3[task_id] -= gki_cb.com.OSNumOrigTicks;
+
+            if (gki_cb.com.OSTaskTmr3[task_id] <= 0)
+            {
+                /* Reload timer and set Timer 3 Expired event mask */
+                gki_cb.com.OSTaskTmr3[task_id] = gki_cb.com.OSTaskTmr3R[task_id];
+
+#if (defined(GKI_TIMER_UPDATES_FROM_ISR) &&  GKI_TIMER_UPDATES_FROM_ISR == TRUE)
+                GKI_isend_event (task_id, TIMER_3_EVT_MASK);
+#else
+                GKI_send_event (task_id, TIMER_3_EVT_MASK);
+#endif
+            }
+        }
+
+        /* Check to see if this timer is the next one to expire */
+        if (gki_cb.com.OSTaskTmr3[task_id] > 0 && gki_cb.com.OSTaskTmr3[task_id] < next_expiration)
+            next_expiration = gki_cb.com.OSTaskTmr3[task_id];
+#endif
+
+    }
+
+#if GKI_TIMER_LIST_NOPREEMPT == TRUE
+    /* End the critical section */
+    GKI_enable();
+#endif
+
+    /* Set the next timer experation value if there is one to start */
+    if (next_expiration < GKI_NO_NEW_TMRS_STARTED)
+    {
+        gki_cb.com.OSTicksTilExp = gki_cb.com.OSNumOrigTicks = next_expiration;
+    }
+    else
+    {
+        gki_cb.com.OSTicksTilExp = gki_cb.com.OSNumOrigTicks = 0;
+    }
+
+    gki_cb.com.timer_nesting = 0;
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_timer_queue_empty
+**
+** Description      This function is called by applications to see whether the timer
+**                  queue is empty
+**
+** Parameters
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN GKI_timer_queue_empty (void)
+{
+    UINT8 tt;
+
+    for (tt = 0; tt < GKI_MAX_TIMER_QUEUES; tt++)
+    {
+        if (gki_cb.com.timer_queues[tt])
+            return FALSE;
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_timer_queue_register_callback
+**
+** Description      This function is called by applications to register system tick
+**                  start/stop callback for time queues
+**
+**
+** Parameters       p_callback - (input) pointer to the system tick callback
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+void GKI_timer_queue_register_callback (SYSTEM_TICK_CBACK *p_callback)
+{
+    gki_cb.com.p_tick_cb = p_callback;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_init_timer_list
+**
+** Description      This function is called by applications when they
+**                  want to initialize a timer list.
+**
+** Parameters       p_timer_listq   - (input) pointer to the timer list queue object
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_init_timer_list (TIMER_LIST_Q *p_timer_listq)
+{
+    p_timer_listq->p_first    = NULL;
+    p_timer_listq->p_last     = NULL;
+    p_timer_listq->last_ticks = 0;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_init_timer_list_entry
+**
+** Description      This function is called by the applications when they
+**                  want to initialize a timer list entry. This must be
+**                  done prior to first use of the entry.
+**
+** Parameters       p_tle           - (input) pointer to a timer list queue entry
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_init_timer_list_entry (TIMER_LIST_ENT  *p_tle)
+{
+    p_tle->p_next  = NULL;
+    p_tle->p_prev  = NULL;
+    p_tle->ticks   = GKI_UNUSED_LIST_ENTRY;
+    p_tle->in_use  = FALSE;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_update_timer_list
+**
+** Description      This function is called by the applications when they
+**                  want to update a timer list. This should be at every
+**                  timer list unit tick, e.g. once per sec, once per minute etc.
+**
+** Parameters       p_timer_listq   - (input) pointer to the timer list queue object
+**                  num_units_since_last_update - (input) number of units since the last update
+**                                  (allows for variable unit update)
+**
+**      NOTE: The following timer list update routines should not be used for exact time
+**            critical purposes.  The timer tasks should be used when exact timing is needed.
+**
+** Returns          the number of timers that have expired
+**
+*******************************************************************************/
+UINT16 GKI_update_timer_list (TIMER_LIST_Q *p_timer_listq, INT32 num_units_since_last_update)
+{
+    TIMER_LIST_ENT  *p_tle;
+    UINT16           num_time_out = 0;
+    INT32            rem_ticks;
+    INT32            temp_ticks;
+
+    p_tle = p_timer_listq->p_first;
+
+    /* First, get the guys who have previously timed out */
+    /* Note that the tick value of the timers should always be '0' */
+    while ((p_tle) && (p_tle->ticks <= 0))
+    {
+        num_time_out++;
+        p_tle = p_tle->p_next;
+    }
+
+    /* Timer entriy tick values are relative to the preceeding entry */
+    rem_ticks = num_units_since_last_update;
+
+    /* Now, adjust remaining timer entries */
+    while ((p_tle != NULL) && (rem_ticks > 0))
+    {
+        temp_ticks = p_tle->ticks;
+        p_tle->ticks -= rem_ticks;
+
+        /* See if this timer has just timed out */
+        if (p_tle->ticks <= 0)
+        {
+            /* We set the number of ticks to '0' so that the legacy code
+             * that assumes a '0' or nonzero value will still work as coded. */
+            p_tle->ticks = 0;
+
+            num_time_out++;
+        }
+
+        rem_ticks -= temp_ticks;  /* Decrement the remaining ticks to process */
+        p_tle = p_tle->p_next;
+    }
+
+    if (p_timer_listq->last_ticks > 0)
+    {
+        p_timer_listq->last_ticks -= num_units_since_last_update;
+
+        /* If the last timer has expired set last_ticks to 0 so that other list update
+        * functions will calculate correctly
+        */
+        if (p_timer_listq->last_ticks < 0)
+            p_timer_listq->last_ticks = 0;
+    }
+
+    return (num_time_out);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_get_remaining_ticks
+**
+** Description      This function is called by an application to get remaining
+**                  ticks to expire
+**
+** Parameters       p_timer_listq   - (input) pointer to the timer list queue object
+**                  p_target_tle    - (input) pointer to a timer list queue entry
+**
+** Returns          0 if timer is not used or timer is not in the list
+**                  remaining ticks if success
+**
+*******************************************************************************/
+UINT32 GKI_get_remaining_ticks (TIMER_LIST_Q *p_timer_listq, TIMER_LIST_ENT  *p_target_tle)
+{
+    TIMER_LIST_ENT  *p_tle;
+    UINT32           rem_ticks = 0;
+
+    if (p_target_tle->in_use)
+    {
+        p_tle = p_timer_listq->p_first;
+
+        /* adding up all of ticks in previous entries */
+        while ((p_tle)&&(p_tle != p_target_tle))
+        {
+            rem_ticks += p_tle->ticks;
+            p_tle = p_tle->p_next;
+        }
+
+        /* if found target entry */
+        if (p_tle == p_target_tle)
+        {
+            rem_ticks += p_tle->ticks;
+        }
+        else
+        {
+            BT_ERROR_TRACE_0(TRACE_LAYER_GKI, "GKI_get_remaining_ticks: No timer entry in the list");
+            return(0);
+        }
+    }
+    else
+    {
+        BT_ERROR_TRACE_0(TRACE_LAYER_GKI, "GKI_get_remaining_ticks: timer entry is not active");
+    }
+
+    return (rem_ticks);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_add_to_timer_list
+**
+** Description      This function is called by an application to add a timer
+**                  entry to a timer list.
+**
+**                  Note: A timer value of '0' will effectively insert an already
+**                      expired event.  Negative tick values will be ignored.
+**
+** Parameters       p_timer_listq   - (input) pointer to the timer list queue object
+**                  p_tle           - (input) pointer to a timer list queue entry
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_add_to_timer_list (TIMER_LIST_Q *p_timer_listq, TIMER_LIST_ENT  *p_tle)
+{
+    UINT32           nr_ticks_total;
+    UINT8 tt;
+    TIMER_LIST_ENT  *p_temp;
+
+    /* Only process valid tick values */
+    if (p_tle->ticks >= 0)
+    {
+        /* If this entry is the last in the list */
+        if (p_tle->ticks >= p_timer_listq->last_ticks)
+        {
+            /* If this entry is the only entry in the list */
+            if (p_timer_listq->p_first == NULL)
+                p_timer_listq->p_first = p_tle;
+            else
+            {
+                /* Insert the entry onto the end of the list */
+                if (p_timer_listq->p_last != NULL)
+                    p_timer_listq->p_last->p_next = p_tle;
+
+                p_tle->p_prev = p_timer_listq->p_last;
+            }
+
+            p_tle->p_next = NULL;
+            p_timer_listq->p_last = p_tle;
+            nr_ticks_total = p_tle->ticks;
+            p_tle->ticks -= p_timer_listq->last_ticks;
+
+            p_timer_listq->last_ticks = nr_ticks_total;
+        }
+        else    /* This entry needs to be inserted before the last entry */
+        {
+            /* Find the entry that the new one needs to be inserted in front of */
+            p_temp = p_timer_listq->p_first;
+            while (p_tle->ticks > p_temp->ticks)
+            {
+                /* Update the tick value if looking at an unexpired entry */
+                if (p_temp->ticks > 0)
+                    p_tle->ticks -= p_temp->ticks;
+
+                p_temp = p_temp->p_next;
+            }
+
+            /* The new entry is the first in the list */
+            if (p_temp == p_timer_listq->p_first)
+            {
+                p_tle->p_next = p_timer_listq->p_first;
+                p_timer_listq->p_first->p_prev = p_tle;
+                p_timer_listq->p_first = p_tle;
+            }
+            else
+            {
+                p_temp->p_prev->p_next = p_tle;
+                p_tle->p_prev = p_temp->p_prev;
+                p_temp->p_prev = p_tle;
+                p_tle->p_next = p_temp;
+            }
+            p_temp->ticks -= p_tle->ticks;
+        }
+
+        p_tle->in_use = TRUE;
+
+        /* if we already add this timer queue to the array */
+        for (tt = 0; tt < GKI_MAX_TIMER_QUEUES; tt++)
+        {
+             if (gki_cb.com.timer_queues[tt] == p_timer_listq)
+                 return;
+        }
+        /* add this timer queue to the array */
+        for (tt = 0; tt < GKI_MAX_TIMER_QUEUES; tt++)
+        {
+             if (gki_cb.com.timer_queues[tt] == NULL)
+                 break;
+        }
+        if (tt < GKI_MAX_TIMER_QUEUES)
+        {
+            gki_cb.com.timer_queues[tt] = p_timer_listq;
+        }
+    }
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_remove_from_timer_list
+**
+** Description      This function is called by an application to remove a timer
+**                  entry from a timer list.
+**
+** Parameters       p_timer_listq   - (input) pointer to the timer list queue object
+**                  p_tle           - (input) pointer to a timer list queue entry
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_remove_from_timer_list (TIMER_LIST_Q *p_timer_listq, TIMER_LIST_ENT  *p_tle)
+{
+    UINT8 tt;
+
+    /* Verify that the entry is valid */
+    if (p_tle == NULL || p_tle->in_use == FALSE || p_timer_listq->p_first == NULL)
+    {
+        return;
+    }
+
+    /* Add the ticks remaining in this timer (if any) to the next guy in the list.
+    ** Note: Expired timers have a tick value of '0'.
+    */
+    if (p_tle->p_next != NULL)
+    {
+        p_tle->p_next->ticks += p_tle->ticks;
+    }
+    else
+    {
+        p_timer_listq->last_ticks -= p_tle->ticks;
+    }
+
+    /* Unlink timer from the list.
+    */
+    if (p_timer_listq->p_first == p_tle)
+    {
+        p_timer_listq->p_first = p_tle->p_next;
+
+        if (p_timer_listq->p_first != NULL)
+            p_timer_listq->p_first->p_prev = NULL;
+
+        if (p_timer_listq->p_last == p_tle)
+            p_timer_listq->p_last = NULL;
+    }
+    else
+    {
+        if (p_timer_listq->p_last == p_tle)
+        {
+            p_timer_listq->p_last = p_tle->p_prev;
+
+            if (p_timer_listq->p_last != NULL)
+                p_timer_listq->p_last->p_next = NULL;
+        }
+        else
+        {
+            if (p_tle->p_next != NULL && p_tle->p_next->p_prev == p_tle)
+                p_tle->p_next->p_prev = p_tle->p_prev;
+            else
+            {
+                /* Error case - chain messed up ?? */
+                return;
+            }
+
+            if (p_tle->p_prev != NULL && p_tle->p_prev->p_next == p_tle)
+                p_tle->p_prev->p_next = p_tle->p_next;
+            else
+            {
+                /* Error case - chain messed up ?? */
+                return;
+            }
+        }
+    }
+
+    p_tle->p_next = p_tle->p_prev = NULL;
+    p_tle->ticks = GKI_UNUSED_LIST_ENTRY;
+    p_tle->in_use = FALSE;
+
+    /* if timer queue is empty */
+    if (p_timer_listq->p_first == NULL && p_timer_listq->p_last == NULL)
+    {
+        for (tt = 0; tt < GKI_MAX_TIMER_QUEUES; tt++)
+        {
+            if (gki_cb.com.timer_queues[tt] == p_timer_listq)
+            {
+                gki_cb.com.timer_queues[tt] = NULL;
+                break;
+            }
+        }
+    }
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         gki_adjust_timer_count
+**
+** Description      This function is called whenever a new timer or GKI_wait occurs
+**                  to adjust (if necessary) the current time til the first expiration.
+**                  This only needs to make an adjustment if the new timer (in ticks) is
+**                  less than the number of ticks remaining on the current timer.
+**
+** Parameters:      ticks - (input) number of system ticks of the new timer entry
+**
+**                  NOTE:  This routine MUST be called while interrupts are disabled to
+**                          avoid updates while adjusting the timer variables.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gki_adjust_timer_count (INT32 ticks)
+{
+    if (ticks > 0)
+    {
+        /* See if the new timer expires before the current first expiration */
+        if (gki_cb.com.OSNumOrigTicks == 0 || (ticks < gki_cb.com.OSTicksTilExp && gki_cb.com.OSTicksTilExp > 0))
+        {
+            gki_cb.com.OSNumOrigTicks = (gki_cb.com.OSNumOrigTicks - gki_cb.com.OSTicksTilExp) + ticks;
+            gki_cb.com.OSTicksTilExp = ticks;
+        }
+    }
+
+    return;
+}
diff --git a/gki/ulinux/data_types.h b/gki/ulinux/data_types.h
new file mode 100644
index 0000000..8cd086a
--- /dev/null
+++ b/gki/ulinux/data_types.h
@@ -0,0 +1,71 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef DATA_TYPES_H
+#define DATA_TYPES_H
+
+#ifndef NULL
+#define NULL     0
+#endif
+
+#ifndef FALSE
+#define FALSE  0
+#endif
+
+typedef unsigned char   UINT8;
+typedef unsigned short  UINT16;
+typedef unsigned long   UINT32;
+typedef signed   long   INT32;
+typedef signed   char   INT8;
+typedef signed   short  INT16;
+typedef unsigned char   BOOLEAN;
+
+
+typedef UINT32          TIME_STAMP;
+
+#ifndef TRUE
+#define TRUE   (!FALSE)
+#endif
+
+typedef unsigned char   UBYTE;
+
+#ifdef __arm
+#define PACKED  __packed
+#define INLINE  __inline
+#else
+#define PACKED
+#define INLINE
+#endif
+
+#ifndef BIG_ENDIAN
+#define BIG_ENDIAN FALSE
+#endif
+
+#define UINT16_LOW_BYTE(x)      ((x) & 0xff)
+#define UINT16_HI_BYTE(x)       ((x) >> 8)
+
+
+#define BCM_STRCAT_S(x1,x2,x3)      strcat((x1),(x3))
+#define BCM_STRNCAT_S(x1,x2,x3,x4)  strncat((x1),(x3),(x4))
+#define BCM_STRCPY_S(x1,x2,x3)      strcpy((x1),(x3))
+#define BCM_STRNCPY_S(x1,x2,x3,x4)  strncpy((x1),(x3),(x4))
+
+
+
+#endif
+
diff --git a/gki/ulinux/gki_int.h b/gki/ulinux/gki_int.h
new file mode 100644
index 0000000..d1cc68c
--- /dev/null
+++ b/gki/ulinux/gki_int.h
@@ -0,0 +1,117 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GKI_INT_H
+#define GKI_INT_H
+
+#include "gki_common.h"
+#include <pthread.h>
+#include <sys/prctl.h>
+
+/**********************************************************************
+** OS specific definitions
+*/
+/* The base priority used for pthread based GKI task. below value is to keep it retro compatible.
+ * It is recommended to use (GKI_MAX_TASKS+3), this will assign real time priorities GKI_MAX_TASKS-
+ * task_id -2 to the thread */
+#ifndef GKI_LINUX_BASE_PRIORITY
+#define GKI_LINUX_BASE_PRIORITY 30
+#endif
+
+/* The base policy used for pthread based GKI task. the sched defines are defined here to avoid undefined values due
+ * to missing header file, see pthread functions! Overall it is recommend however to use SCHED_NOMRAL */
+#define GKI_SCHED_NORMAL    0
+#define GKI_SCHED_FIFO      1
+#define GKI_SCHED_RR        2
+#ifndef GKI_LINUX_BASE_POLICY
+#define GKI_LINUX_BASE_POLICY GKI_SCHED_NORMAL
+#endif
+
+/* GKI timer bases should use GKI_SCHED_FIFO to ensure the least jitter possible */
+#ifndef GKI_LINUX_TIMER_POLICY
+#define GKI_LINUX_TIMER_POLICY GKI_SCHED_FIFO
+#endif
+
+/* the GKI_timer_update() thread should have the highest real time priority to ensue correct
+ * timer expiry.
+ */
+#ifndef GKI_LINUX_TIMER_TICK_PRIORITY
+#define GKI_LINUX_TIMER_TICK_PRIORITY GKI_LINUX_BASE_PRIORITY+2
+#endif
+
+/* the AV timer should preferably run above the gki timer tick to ensure precise AV timing
+ * If you observe AV jitter under have load you may increase this one */
+#ifndef GKI_LINUX_AV_TIMER_PRIORITY
+#define GKI_LINUX_AV_TIMER_PRIORITY GKI_LINUX_BASE_PRIORITY+3
+#endif
+
+/* defines by how much the nice value of the PROCESS should be changed. Values allowed:
+ * -19 to +19. a negative value give higher priority to btld compared to the default nice value
+ * of 20. in case of SCHED_NORMAL, a level of -5 should give a good btld/bt performance.
+ * In case of real time scheduling, leave default value.
+ */
+#ifndef GKI_LINUX_DEFAULT_NICE_INC
+#define GKI_LINUX_DEFAULT_NICE_INC -7
+#endif
+
+typedef struct
+{
+    pthread_mutex_t     GKI_mutex;
+    pthread_t           thread_id[GKI_MAX_TASKS];
+    pthread_mutex_t     thread_evt_mutex[GKI_MAX_TASKS];
+    pthread_cond_t      thread_evt_cond[GKI_MAX_TASKS];
+    pthread_mutex_t     thread_timeout_mutex[GKI_MAX_TASKS];
+    pthread_cond_t      thread_timeout_cond[GKI_MAX_TASKS];
+    int                 no_timer_suspend;   /* 1: no suspend, 0 stop calling GKI_timer_update() */
+    pthread_mutex_t     gki_timer_mutex;
+    pthread_cond_t      gki_timer_cond;
+#if (GKI_DEBUG == TRUE)
+    pthread_mutex_t     GKI_trace_mutex;
+#endif
+} tGKI_OS;
+
+/* condition to exit or continue GKI_run() timer loop */
+#define GKI_TIMER_TICK_RUN_COND 1
+#define GKI_TIMER_TICK_STOP_COND 0
+
+extern void gki_system_tick_start_stop_cback(BOOLEAN start);
+
+/* Contains common control block as well as OS specific variables */
+typedef struct
+{
+    tGKI_OS     os;
+    tGKI_COM_CB com;
+} tGKI_CB;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if GKI_DYNAMIC_MEMORY == FALSE
+GKI_API extern tGKI_CB  gki_cb;
+#else
+GKI_API extern tGKI_CB *gki_cb_ptr;
+#define gki_cb (*gki_cb_ptr)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/gki/ulinux/gki_ulinux.c b/gki/ulinux/gki_ulinux.c
new file mode 100755
index 0000000..57ff7bb
--- /dev/null
+++ b/gki/ulinux/gki_ulinux.c
@@ -0,0 +1,1514 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/****************************************************************************
+**
+**  Name        gki_linux_pthreads.c
+**
+**  Function    pthreads version of Linux GKI. This version is used for
+**              settop projects that already use pthreads and not pth.
+**
+*****************************************************************************/
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/times.h>
+
+#include <pthread.h>  /* must be 1st header defined  */
+#include <time.h>
+#include "gki_int.h"
+#include "bt_utils.h"
+
+#define LOG_TAG "GKI_LINUX"
+
+#include <utils/Log.h>
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef GKI_TICK_TIMER_DEBUG
+#define GKI_TICK_TIMER_DEBUG FALSE
+#endif
+
+#define GKI_INFO(fmt, ...) ALOGI ("%s: " fmt, __FUNCTION__, ## __VA_ARGS__)
+
+/* always log errors */
+#define GKI_ERROR_LOG(fmt, ...)  ALOGE ("##### ERROR : %s: " fmt "#####", __FUNCTION__, ## __VA_ARGS__)
+
+#if defined (GKI_TICK_TIMER_DEBUG) && (GKI_TICK_TIMER_DEBUG == TRUE)
+#define GKI_TIMER_TRACE(fmt, ...) ALOGI ("%s: " fmt, __FUNCTION__, ## __VA_ARGS__)
+#else
+#define GKI_TIMER_TRACE(fmt, ...)
+#endif
+
+
+#define SCHED_NORMAL 0
+#define SCHED_FIFO 1
+#define SCHED_RR 2
+#define SCHED_BATCH 3
+
+#define NANOSEC_PER_MILLISEC (1000000)
+#define NSEC_PER_SEC (1000*NANOSEC_PER_MILLISEC)
+
+/* works only for 1ms to 1000ms heart beat ranges */
+#define LINUX_SEC (1000/TICKS_PER_SEC)
+
+#define LOCK(m)  pthread_mutex_lock(&m)
+#define UNLOCK(m) pthread_mutex_unlock(&m)
+#define INIT(m) pthread_mutex_init(&m, NULL)
+
+#define WAKE_LOCK_ID "brcm_btld"
+#define PARTIAL_WAKE_LOCK 1
+
+#if GKI_DYNAMIC_MEMORY == FALSE
+tGKI_CB   gki_cb;
+#endif
+
+#ifdef NO_GKI_RUN_RETURN
+static pthread_t            timer_thread_id = 0;
+static int                  shutdown_timer = 0;
+#endif
+
+#ifndef GKI_SHUTDOWN_EVT
+#define GKI_SHUTDOWN_EVT    APPL_EVT_7
+#endif
+
+#define  __likely(cond)    __builtin_expect(!!(cond), 1)
+#define  __unlikely(cond)  __builtin_expect(!!(cond), 0)
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+#define pthread_cond_timedwait_monotonic pthread_cond_timedwait
+
+typedef struct
+{
+    UINT8 task_id;          /* GKI task id */
+    TASKPTR task_entry;     /* Task entry function*/
+    UINT32 params;          /* Extra params to pass to task entry function */
+} gki_pthread_info_t;
+
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+
+int g_GkiTimerWakeLockOn = 0;
+gki_pthread_info_t gki_pthread_info[GKI_MAX_TASKS];
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**  Externs
+******************************************************************************/
+
+extern int acquire_wake_lock(int lock, const char* id);
+extern int release_wake_lock(const char* id);
+
+/*****************************************************************************
+**  Functions
+******************************************************************************/
+
+
+/*****************************************************************************
+**
+** Function        gki_task_entry
+**
+** Description     GKI pthread callback
+**
+** Returns         void
+**
+*******************************************************************************/
+
+void gki_task_entry(UINT32 params)
+{
+    gki_pthread_info_t *p_pthread_info = (gki_pthread_info_t *)params;
+    gki_cb.os.thread_id[p_pthread_info->task_id] = pthread_self();
+
+    prctl(PR_SET_NAME, (unsigned long)gki_cb.com.OSTName[p_pthread_info->task_id], 0, 0, 0);
+
+    GKI_INFO("gki_task_entry task_id=%i [%s] starting\n", p_pthread_info->task_id,
+                gki_cb.com.OSTName[p_pthread_info->task_id]);
+
+    /* Call the actual thread entry point */
+    (p_pthread_info->task_entry)(p_pthread_info->params);
+
+    GKI_INFO("gki_task task_id=%i [%s] terminating\n", p_pthread_info->task_id,
+                gki_cb.com.OSTName[p_pthread_info->task_id]);
+
+    pthread_exit(0);    /* GKI tasks have no return value */
+}
+/* end android */
+
+/*******************************************************************************
+**
+** Function         GKI_init
+**
+** Description      This function is called once at startup to initialize
+**                  all the timer structures.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void GKI_init(void)
+{
+    pthread_mutexattr_t attr;
+    tGKI_OS             *p_os;
+
+    memset (&gki_cb, 0, sizeof (gki_cb));
+
+    gki_buffer_init();
+    gki_timers_init();
+    gki_cb.com.OSTicks = (UINT32) times(0);
+
+    pthread_mutexattr_init(&attr);
+
+#ifndef __CYGWIN__
+    pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE_NP);
+#endif
+    p_os = &gki_cb.os;
+    pthread_mutex_init(&p_os->GKI_mutex, &attr);
+    /* pthread_mutex_init(&GKI_sched_mutex, NULL); */
+#if (GKI_DEBUG == TRUE)
+    pthread_mutex_init(&p_os->GKI_trace_mutex, NULL);
+#endif
+    /* pthread_mutex_init(&thread_delay_mutex, NULL); */  /* used in GKI_delay */
+    /* pthread_cond_init (&thread_delay_cond, NULL); */
+
+    /* Initialiase GKI_timer_update suspend variables & mutexes to be in running state.
+     * this works too even if GKI_NO_TICK_STOP is defined in btld.txt */
+    p_os->no_timer_suspend = GKI_TIMER_TICK_RUN_COND;
+    pthread_mutex_init(&p_os->gki_timer_mutex, NULL);
+#ifndef NO_GKI_RUN_RETURN
+    pthread_cond_init(&p_os->gki_timer_cond, NULL);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_get_os_tick_count
+**
+** Description      This function is called to retrieve the native OS system tick.
+**
+** Returns          Tick count of native OS.
+**
+*******************************************************************************/
+UINT32 GKI_get_os_tick_count(void)
+{
+     /* TODO - add any OS specific code here */
+    return (gki_cb.com.OSTicks);
+}
+
+/*******************************************************************************
+**
+** Function         GKI_create_task
+**
+** Description      This function is called to create a new OSS task.
+**
+** Parameters:      task_entry  - (input) pointer to the entry function of the task
+**                  task_id     - (input) Task id is mapped to priority
+**                  taskname    - (input) name given to the task
+**                  stack       - (input) pointer to the top of the stack (highest memory location)
+**                  stacksize   - (input) size of the stack allocated for the task
+**
+** Returns          GKI_SUCCESS if all OK, GKI_FAILURE if any problem
+**
+** NOTE             This function take some parameters that may not be needed
+**                  by your particular OS. They are here for compatability
+**                  of the function prototype.
+**
+*******************************************************************************/
+UINT8 GKI_create_task (TASKPTR task_entry, UINT8 task_id, INT8 *taskname, UINT16 *stack, UINT16 stacksize)
+{
+    UINT16  i;
+    UINT8   *p;
+    struct sched_param param;
+    int policy, ret = 0;
+    pthread_attr_t attr1;
+
+    GKI_TRACE( "GKI_create_task %x %d %s %x %d", (int)task_entry, (int)task_id,
+            (char*) taskname, (int) stack, (int)stacksize);
+
+    if (task_id >= GKI_MAX_TASKS)
+    {
+        GKI_ERROR_LOG("Error! task ID > max task allowed");
+        return (GKI_FAILURE);
+    }
+
+
+    gki_cb.com.OSRdyTbl[task_id]    = TASK_READY;
+    gki_cb.com.OSTName[task_id]     = taskname;
+    gki_cb.com.OSWaitTmr[task_id]   = 0;
+    gki_cb.com.OSWaitEvt[task_id]   = 0;
+
+    /* Initialize mutex and condition variable objects for events and timeouts */
+    pthread_mutex_init(&gki_cb.os.thread_evt_mutex[task_id], NULL);
+    pthread_cond_init (&gki_cb.os.thread_evt_cond[task_id], NULL);
+    pthread_mutex_init(&gki_cb.os.thread_timeout_mutex[task_id], NULL);
+    pthread_cond_init (&gki_cb.os.thread_timeout_cond[task_id], NULL);
+
+    pthread_attr_init(&attr1);
+    /* by default, pthread creates a joinable thread */
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+    pthread_attr_setdetachstate(&attr1, PTHREAD_CREATE_DETACHED);
+
+    GKI_TRACE("GKI creating task %i\n", task_id);
+#else
+    GKI_TRACE("GKI creating JOINABLE task %i\n", task_id);
+#endif
+
+    /* On Android, the new tasks starts running before 'gki_cb.os.thread_id[task_id]' is initialized */
+    /* Pass task_id to new task so it can initialize gki_cb.os.thread_id[task_id] for it calls GKI_wait */
+    gki_pthread_info[task_id].task_id = task_id;
+    gki_pthread_info[task_id].task_entry = task_entry;
+    gki_pthread_info[task_id].params = 0;
+
+    ret = pthread_create( &gki_cb.os.thread_id[task_id],
+              &attr1,
+              (void *)gki_task_entry,
+              &gki_pthread_info[task_id]);
+
+    if (ret != 0)
+    {
+         GKI_ERROR_LOG("pthread_create failed(%d), %s!\n\r", ret, taskname);
+         return GKI_FAILURE;
+    }
+
+    if(pthread_getschedparam(gki_cb.os.thread_id[task_id], &policy, &param)==0)
+     {
+#if (GKI_LINUX_BASE_POLICY!=GKI_SCHED_NORMAL)
+#if defined(PBS_SQL_TASK)
+         if (task_id == PBS_SQL_TASK)
+         {
+             GKI_TRACE("PBS SQL lowest priority task");
+             policy = SCHED_NORMAL;
+         }
+         else
+#endif
+#endif
+         {
+             /* check if define in gki_int.h is correct for this compile environment! */
+             policy = GKI_LINUX_BASE_POLICY;
+#if (GKI_LINUX_BASE_POLICY!=GKI_SCHED_NORMAL)
+             param.sched_priority = GKI_LINUX_BASE_PRIORITY - task_id - 2;
+#endif
+         }
+         pthread_setschedparam(gki_cb.os.thread_id[task_id], policy, &param);
+     }
+
+    GKI_TRACE( "Leaving GKI_create_task %x %d %x %s %x %d\n",
+              (int)task_entry,
+              (int)task_id,
+              (int)gki_cb.os.thread_id[task_id],
+              (char*)taskname,
+              (int)stack,
+              (int)stacksize);
+
+    return (GKI_SUCCESS);
+}
+
+void GKI_destroy_task(UINT8 task_id)
+{
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+        int i = 0;
+#else
+        int result;
+#endif
+    if (gki_cb.com.OSRdyTbl[task_id] != TASK_DEAD)
+    {
+        gki_cb.com.OSRdyTbl[task_id] = TASK_DEAD;
+
+        /* paranoi settings, make sure that we do not execute any mailbox events */
+        gki_cb.com.OSWaitEvt[task_id] &= ~(TASK_MBOX_0_EVT_MASK|TASK_MBOX_1_EVT_MASK|
+                                            TASK_MBOX_2_EVT_MASK|TASK_MBOX_3_EVT_MASK);
+
+#if (GKI_NUM_TIMERS > 0)
+        gki_cb.com.OSTaskTmr0R[task_id] = 0;
+        gki_cb.com.OSTaskTmr0 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        gki_cb.com.OSTaskTmr1R[task_id] = 0;
+        gki_cb.com.OSTaskTmr1 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        gki_cb.com.OSTaskTmr2R[task_id] = 0;
+        gki_cb.com.OSTaskTmr2 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        gki_cb.com.OSTaskTmr3R[task_id] = 0;
+        gki_cb.com.OSTaskTmr3 [task_id] = 0;
+#endif
+
+        GKI_send_event(task_id, EVENT_MASK(GKI_SHUTDOWN_EVT));
+
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+        i = 0;
+
+        while ((gki_cb.com.OSWaitEvt[task_id] != 0) && (++i < 10))
+            usleep(100 * 1000);
+#else
+        result = pthread_join( gki_cb.os.thread_id[task_id], NULL );
+        if ( result < 0 )
+        {
+            GKI_ERROR_LOG( "pthread_join() FAILED: result: %d", result );
+        }
+#endif
+        GKI_exit_task(task_id);
+        GKI_INFO( "GKI_shutdown(): task [%s] terminated\n", gki_cb.com.OSTName[task_id]);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_task_self_cleanup
+**
+** Description      This function is used in the case when the calling thread
+**                  is exiting itself. The GKI_destroy_task function can not be
+**                  used in this case due to the pthread_join call. The function
+**                  cleans up GKI control block associated to the terminating
+**                  thread.
+**
+** Parameters:      task_id     - (input) Task id is used for sanity check to
+**                                 make sure the calling thread is in the right
+**                                 context.
+**
+** Returns          None
+**
+*******************************************************************************/
+void GKI_task_self_cleanup(UINT8 task_id)
+{
+    UINT8 my_task_id = GKI_get_taskid();
+
+    if (task_id != my_task_id)
+    {
+        GKI_ERROR_LOG("%s: Wrong context - current task %d is not the given task id %d",\
+                      __FUNCTION__, my_task_id, task_id);
+        return;
+    }
+
+    if (gki_cb.com.OSRdyTbl[task_id] != TASK_DEAD)
+    {
+        /* paranoi settings, make sure that we do not execute any mailbox events */
+        gki_cb.com.OSWaitEvt[task_id] &= ~(TASK_MBOX_0_EVT_MASK|TASK_MBOX_1_EVT_MASK|
+                                            TASK_MBOX_2_EVT_MASK|TASK_MBOX_3_EVT_MASK);
+
+#if (GKI_NUM_TIMERS > 0)
+        gki_cb.com.OSTaskTmr0R[task_id] = 0;
+        gki_cb.com.OSTaskTmr0 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 1)
+        gki_cb.com.OSTaskTmr1R[task_id] = 0;
+        gki_cb.com.OSTaskTmr1 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 2)
+        gki_cb.com.OSTaskTmr2R[task_id] = 0;
+        gki_cb.com.OSTaskTmr2 [task_id] = 0;
+#endif
+
+#if (GKI_NUM_TIMERS > 3)
+        gki_cb.com.OSTaskTmr3R[task_id] = 0;
+        gki_cb.com.OSTaskTmr3 [task_id] = 0;
+#endif
+
+        GKI_exit_task(task_id);
+
+        /* Calling pthread_detach here to mark the thread as detached.
+           Once the thread terminates, the system can reclaim its resources
+           without waiting for another thread to join with.
+        */
+        pthread_detach(gki_cb.os.thread_id[task_id]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         GKI_shutdown
+**
+** Description      shutdowns the GKI tasks/threads in from max task id to 0 and frees
+**                  pthread resources!
+**                  IMPORTANT: in case of join method, GKI_shutdown must be called outside
+**                  a GKI thread context!
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void GKI_shutdown(void)
+{
+    UINT8 task_id;
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+    int i = 0;
+#else
+    int result;
+#endif
+
+#ifdef GKI_USE_DEFERED_ALLOC_BUF_POOLS
+    gki_dealloc_free_queue();
+#endif
+
+    /* release threads and set as TASK_DEAD. going from low to high priority fixes
+     * GKI_exception problem due to btu->hci sleep request events  */
+    for (task_id = GKI_MAX_TASKS; task_id > 0; task_id--)
+    {
+        if (gki_cb.com.OSRdyTbl[task_id - 1] != TASK_DEAD)
+        {
+            gki_cb.com.OSRdyTbl[task_id - 1] = TASK_DEAD;
+
+            /* paranoi settings, make sure that we do not execute any mailbox events */
+            gki_cb.com.OSWaitEvt[task_id-1] &= ~(TASK_MBOX_0_EVT_MASK|TASK_MBOX_1_EVT_MASK|
+                                                TASK_MBOX_2_EVT_MASK|TASK_MBOX_3_EVT_MASK);
+            GKI_send_event(task_id - 1, EVENT_MASK(GKI_SHUTDOWN_EVT));
+
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+            i = 0;
+
+            while ((gki_cb.com.OSWaitEvt[task_id - 1] != 0) && (++i < 10))
+                usleep(100 * 1000);
+#else
+            result = pthread_join( gki_cb.os.thread_id[task_id-1], NULL );
+
+            if ( result < 0 )
+            {
+                ALOGE( "pthread_join() FAILED: result: %d", result );
+            }
+#endif
+            // GKI_ERROR_LOG( "GKI_shutdown(): task %s dead\n", gki_cb.com.OSTName[task_id]);
+            GKI_exit_task(task_id - 1);
+        }
+    }
+
+    /* Destroy mutex and condition variable objects */
+    pthread_mutex_destroy(&gki_cb.os.GKI_mutex);
+
+    /*    pthread_mutex_destroy(&GKI_sched_mutex); */
+#if (GKI_DEBUG == TRUE)
+    pthread_mutex_destroy(&gki_cb.os.GKI_trace_mutex);
+#endif
+    /*    pthread_mutex_destroy(&thread_delay_mutex);
+     pthread_cond_destroy (&thread_delay_cond); */
+#if ( FALSE == GKI_PTHREAD_JOINABLE )
+    i = 0;
+#endif
+
+#ifdef NO_GKI_RUN_RETURN
+    shutdown_timer = 1;
+#endif
+    if (g_GkiTimerWakeLockOn)
+    {
+        GKI_TRACE("GKI_shutdown :  release_wake_lock(brcm_btld)");
+        release_wake_lock(WAKE_LOCK_ID);
+        g_GkiTimerWakeLockOn = 0;
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function        gki_system_tick_start_stop_cback
+ **
+ ** Description     This function runs a task
+ **
+ ** Parameters:     start: TRUE start system tick (again), FALSE stop
+ **
+ ** Returns         void
+ **
+ *********************************************************************************/
+
+void gki_system_tick_start_stop_cback(BOOLEAN start)
+{
+    tGKI_OS         *p_os = &gki_cb.os;
+    int    *p_run_cond = &p_os->no_timer_suspend;
+    static int wake_lock_count;
+
+    if ( FALSE == start )
+    {
+        /* gki_system_tick_start_stop_cback() maybe called even so it was already stopped! */
+        if (GKI_TIMER_TICK_RUN_COND == *p_run_cond)
+        {
+#ifdef NO_GKI_RUN_RETURN
+            /* take free mutex to block timer thread */
+            pthread_mutex_lock(&p_os->gki_timer_mutex);
+#endif
+            /* this can lead to a race condition. however as we only read this variable in the
+             * timer loop we should be fine with this approach. otherwise uncomment below mutexes.
+             */
+            /* GKI_disable(); */
+            *p_run_cond = GKI_TIMER_TICK_STOP_COND;
+            /* GKI_enable(); */
+
+            GKI_TIMER_TRACE(">>> STOP GKI_timer_update(), wake_lock_count:%d", --wake_lock_count);
+
+            release_wake_lock(WAKE_LOCK_ID);
+            g_GkiTimerWakeLockOn = 0;
+        }
+    }
+    else
+    {
+        /* restart GKI_timer_update() loop */
+        acquire_wake_lock(PARTIAL_WAKE_LOCK, WAKE_LOCK_ID);
+
+        g_GkiTimerWakeLockOn = 1;
+        *p_run_cond = GKI_TIMER_TICK_RUN_COND;
+
+#ifdef NO_GKI_RUN_RETURN
+        pthread_mutex_unlock( &p_os->gki_timer_mutex );
+#else
+        pthread_mutex_lock( &p_os->gki_timer_mutex );
+        pthread_cond_signal( &p_os->gki_timer_cond );
+        pthread_mutex_unlock( &p_os->gki_timer_mutex );
+#endif
+
+        GKI_TIMER_TRACE(">>> START GKI_timer_update(), wake_lock_count:%d", ++wake_lock_count );
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_run
+**
+** Description      This function runs a task
+****
+** Returns          void
+**
+** NOTE             This function is only needed for operating systems where
+**                  starting a task is a 2-step process. Most OS's do it in
+**                  one step, If your OS does it in one step, this function
+**                  should be empty.
+*********************************************************************************/
+#ifdef NO_GKI_RUN_RETURN
+void* timer_thread(void *arg)
+{
+    int timeout_ns=0;
+    struct timespec timeout;
+    struct timespec previous = {0,0};
+    struct timespec current;
+    int err;
+    int delta_ns;
+    int restart;
+    tGKI_OS         *p_os = &gki_cb.os;
+    int  *p_run_cond = &p_os->no_timer_suspend;
+
+    /* Indicate that tick is just starting */
+    restart = 1;
+
+    prctl(PR_SET_NAME, (unsigned long)"gki timer", 0, 0, 0);
+
+    raise_priority_a2dp(TASK_HIGH_GKI_TIMER);
+
+    while(!shutdown_timer)
+    {
+        /* If the timer has been stopped (no SW timer running) */
+        if (*p_run_cond == GKI_TIMER_TICK_STOP_COND)
+        {
+            /*
+             * We will lock/wait on GKI_timer_mutex.
+             * This mutex will be unlocked when timer is re-started
+             */
+            GKI_TRACE("GKI_run lock mutex");
+            pthread_mutex_lock(&p_os->gki_timer_mutex);
+
+            /* We are here because the mutex has been released by timer cback */
+            /* Let's release it for future use */
+            GKI_TRACE("GKI_run unlock mutex");
+            pthread_mutex_unlock(&p_os->gki_timer_mutex);
+
+            /* Indicate that tick is just starting */
+            restart = 1;
+        }
+
+        /* Get time */
+        clock_gettime(CLOCK_MONOTONIC, &current);
+
+        /* Check if tick was just restarted, indicating to the compiler that this is
+         * unlikely to happen (to help branch prediction) */
+        if (__unlikely(restart))
+        {
+            /* Clear the restart indication */
+            restart = 0;
+
+            timeout_ns = (GKI_TICKS_TO_MS(1) * 1000000);
+        }
+        else
+        {
+            /* Compute time elapsed since last sleep start */
+            delta_ns = current.tv_nsec - previous.tv_nsec;
+            delta_ns += (current.tv_sec - previous.tv_sec) * 1000000000;
+
+            /* Compute next timeout:
+             *    timeout = (next theoretical expiration) - current time
+             *    timeout = (previous time + timeout + delay) - current time
+             *    timeout = timeout + delay - (current time - previous time)
+             *    timeout += delay - delta */
+            timeout_ns += (GKI_TICKS_TO_MS(1) * 1000000) - delta_ns;
+        }
+        /* Save the current time for next iteration */
+        previous = current;
+
+        timeout.tv_sec = 0;
+
+        /* Sleep until next theoretical tick time.  In case of excessive
+           elapsed time since last theoretical tick expiration, it is
+           possible that the timeout value is negative.  To protect
+           against this error, we set minimum sleep time to 10% of the
+           tick period.  We indicate to compiler that this is unlikely to
+           happen (to help branch prediction) */
+
+        if (__unlikely(timeout_ns < ((GKI_TICKS_TO_MS(1) * 1000000) * 0.1)))
+        {
+            timeout.tv_nsec = (GKI_TICKS_TO_MS(1) * 1000000) * 0.1;
+
+            /* Print error message if tick really got delayed
+               (more than 5 ticks) */
+            if (timeout_ns < GKI_TICKS_TO_MS(-5) * 1000000)
+            {
+                GKI_ERROR_LOG("tick delayed > 5 slots (%d,%d) -- cpu overload ? ",
+                        timeout_ns, GKI_TICKS_TO_MS(-5) * 1000000);
+            }
+        }
+        else
+        {
+            timeout.tv_nsec = timeout_ns;
+        }
+
+        do
+        {
+            /* [u]sleep can't be used because it uses SIGALRM */
+            err = nanosleep(&timeout, &timeout);
+        } while (err < 0 && errno == EINTR);
+
+        /* Increment the GKI time value by one tick and update internal timers */
+        GKI_timer_update(1);
+    }
+    GKI_TRACE("gki_ulinux: Exiting timer_thread");
+    pthread_exit(NULL);
+    return NULL;
+}
+#endif
+
+
+/*****************************************************************************
+**
+** Function        gki_set_timer_scheduling
+**
+** Description     helper function to set scheduling policy and priority of btdl
+**
+** Returns         void
+**
+*******************************************************************************/
+
+static void gki_set_timer_scheduling( void )
+{
+    pid_t               main_pid = getpid();
+    struct sched_param  param;
+    int                 policy;
+
+    policy = sched_getscheduler(main_pid);
+
+    if ( policy != -1 )
+    {
+        GKI_TRACE("gki_set_timer_scheduling(()::scheduler current policy: %d", policy);
+
+        /* ensure highest priority in the system + 2 to allow space for read threads */
+        param.sched_priority = GKI_LINUX_TIMER_TICK_PRIORITY;
+
+        if ( 0!=sched_setscheduler(main_pid, GKI_LINUX_TIMER_POLICY, &param ) )
+        {
+            GKI_TRACE("sched_setscheduler() failed with error: %d", errno);
+        }
+    }
+    else
+    {
+        GKI_TRACE( "getscheduler failed: %d", errno);
+    }
+}
+
+
+/*****************************************************************************
+**
+** Function        GKI_freeze
+**
+** Description     Freeze GKI. Relevant only when NO_GKI_RUN_RETURN is defined
+**
+** Returns
+**
+*******************************************************************************/
+
+void GKI_freeze()
+{
+#ifdef NO_GKI_RUN_RETURN
+   shutdown_timer = 1;
+   pthread_mutex_unlock( &gki_cb.os.gki_timer_mutex );
+   /* Ensure that the timer thread exits */
+   pthread_join(timer_thread_id, NULL);
+#endif
+}
+
+/*****************************************************************************
+**
+** Function        GKI_run
+**
+** Description     Main GKI loop
+**
+** Returns
+**
+*******************************************************************************/
+
+void GKI_run (void *p_task_id)
+{
+    struct timespec delay;
+    int err;
+    volatile int * p_run_cond = &gki_cb.os.no_timer_suspend;
+
+#ifndef GKI_NO_TICK_STOP
+    /* adjust btld scheduling scheme now */
+    gki_set_timer_scheduling();
+
+    /* register start stop function which disable timer loop in GKI_run() when no timers are
+     * in any GKI/BTA/BTU this should save power when BTLD is idle! */
+    GKI_timer_queue_register_callback( gki_system_tick_start_stop_cback );
+    GKI_TRACE( "GKI_run(): Start/Stop GKI_timer_update_registered!" );
+#endif
+
+#ifdef NO_GKI_RUN_RETURN
+    pthread_attr_t timer_attr;
+
+    shutdown_timer = 0;
+
+    pthread_attr_init(&timer_attr);
+    if (pthread_create( &timer_thread_id,
+              &timer_attr,
+              timer_thread,
+              NULL) != 0 )
+    {
+        GKI_ERROR_LOG("pthread_create failed to create timer_thread!\n\r");
+        return;
+    }
+
+#else
+    GKI_TRACE("GKI_run ");
+    for (;;)
+    {
+        do
+        {
+            /* adjust hear bit tick in btld by changning TICKS_PER_SEC!!!!! this formula works only for
+             * 1-1000ms heart beat units! */
+            delay.tv_sec = LINUX_SEC / 1000;
+            delay.tv_nsec = 1000 * 1000 * (LINUX_SEC % 1000);
+
+            /* [u]sleep can't be used because it uses SIGALRM */
+            do
+            {
+                err = nanosleep(&delay, &delay);
+            } while (err < 0 && errno == EINTR);
+
+            /* the unit should be alsways 1 (1 tick). only if you vary for some reason heart beat tick
+             * e.g. power saving you may want to provide more ticks
+             */
+            GKI_timer_update( 1 );
+            /* BT_TRACE_2( TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, "update: tv_sec: %d, tv_nsec: %d", delay.tv_sec, delay.tv_nsec ); */
+        } while ( GKI_TIMER_TICK_RUN_COND == *p_run_cond );
+
+        /* currently on reason to exit above loop is no_timer_suspend == GKI_TIMER_TICK_STOP_COND
+         * block timer main thread till re-armed by  */
+
+        GKI_TIMER_TRACE(">>> SUSPENDED GKI_timer_update()" );
+
+        pthread_mutex_lock( &gki_cb.os.gki_timer_mutex );
+        pthread_cond_wait( &gki_cb.os.gki_timer_cond, &gki_cb.os.gki_timer_mutex );
+        pthread_mutex_unlock( &gki_cb.os.gki_timer_mutex );
+
+        /* potentially we need to adjust os gki_cb.com.OSTicks */
+        GKI_TIMER_TRACE(">>> RESTARTED GKI_timer_update(): run_cond: %d",
+                    *p_run_cond );
+
+    }
+#endif
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_stop
+**
+** Description      This function is called to stop
+**                  the tasks and timers when the system is being stopped
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to use it in your own implementation,
+**                  put specific code here.
+**
+*******************************************************************************/
+
+void GKI_stop (void)
+{
+    UINT8 task_id;
+
+    /*  gki_queue_timer_cback(FALSE); */
+    /* TODO - add code here if needed*/
+
+    for(task_id = 0; task_id<GKI_MAX_TASKS; task_id++)
+    {
+        if(gki_cb.com.OSRdyTbl[task_id] != TASK_DEAD)
+        {
+            GKI_exit_task(task_id);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_wait
+**
+** Description      This function is called by tasks to wait for a specific
+**                  event or set of events. The task may specify the duration
+**                  that it wants to wait for, or 0 if infinite.
+**
+** Parameters:      flag -    (input) the event or set of events to wait for
+**                  timeout - (input) the duration that the task wants to wait
+**                                    for the specific events (in system ticks)
+**
+**
+** Returns          the event mask of received events or zero if timeout
+**
+*******************************************************************************/
+UINT16 GKI_wait (UINT16 flag, UINT32 timeout)
+{
+    UINT16 evt;
+    UINT8 rtask;
+    struct timespec abstime = { 0, 0 };
+
+    int sec;
+    int nano_sec;
+
+    rtask = GKI_get_taskid();
+
+    GKI_TRACE("GKI_wait %d %x %d", (int)rtask, (int)flag, (int)timeout);
+
+    gki_cb.com.OSWaitForEvt[rtask] = flag;
+
+    /* protect OSWaitEvt[rtask] from modification from an other thread */
+    pthread_mutex_lock(&gki_cb.os.thread_evt_mutex[rtask]);
+
+    if (!(gki_cb.com.OSWaitEvt[rtask] & flag))
+    {
+        if (timeout)
+        {
+            clock_gettime(CLOCK_MONOTONIC, &abstime);
+
+            /* add timeout */
+            sec = timeout / 1000;
+            nano_sec = (timeout % 1000) * NANOSEC_PER_MILLISEC;
+            abstime.tv_nsec += nano_sec;
+            if (abstime.tv_nsec > NSEC_PER_SEC)
+            {
+                abstime.tv_sec += (abstime.tv_nsec / NSEC_PER_SEC);
+                abstime.tv_nsec = abstime.tv_nsec % NSEC_PER_SEC;
+            }
+            abstime.tv_sec += sec;
+
+            pthread_cond_timedwait_monotonic(&gki_cb.os.thread_evt_cond[rtask],
+                    &gki_cb.os.thread_evt_mutex[rtask], &abstime);
+
+        }
+        else
+        {
+            pthread_cond_wait(&gki_cb.os.thread_evt_cond[rtask], &gki_cb.os.thread_evt_mutex[rtask]);
+        }
+
+        /* TODO: check, this is probably neither not needed depending on phtread_cond_wait() implmentation,
+         e.g. it looks like it is implemented as a counter in which case multiple cond_signal
+         should NOT be lost! */
+
+        /* we are waking up after waiting for some events, so refresh variables
+           no need to call GKI_disable() here as we know that we will have some events as we've been waking
+           up after condition pending or timeout */
+
+        if (gki_cb.com.OSTaskQFirst[rtask][0])
+            gki_cb.com.OSWaitEvt[rtask] |= TASK_MBOX_0_EVT_MASK;
+        if (gki_cb.com.OSTaskQFirst[rtask][1])
+            gki_cb.com.OSWaitEvt[rtask] |= TASK_MBOX_1_EVT_MASK;
+        if (gki_cb.com.OSTaskQFirst[rtask][2])
+            gki_cb.com.OSWaitEvt[rtask] |= TASK_MBOX_2_EVT_MASK;
+        if (gki_cb.com.OSTaskQFirst[rtask][3])
+            gki_cb.com.OSWaitEvt[rtask] |= TASK_MBOX_3_EVT_MASK;
+
+        if (gki_cb.com.OSRdyTbl[rtask] == TASK_DEAD)
+        {
+            gki_cb.com.OSWaitEvt[rtask] = 0;
+            /* unlock thread_evt_mutex as pthread_cond_wait() does auto lock when cond is met */
+            pthread_mutex_unlock(&gki_cb.os.thread_evt_mutex[rtask]);
+            return (EVENT_MASK(GKI_SHUTDOWN_EVT));
+        }
+    }
+
+    /* Clear the wait for event mask */
+    gki_cb.com.OSWaitForEvt[rtask] = 0;
+
+    /* Return only those bits which user wants... */
+    evt = gki_cb.com.OSWaitEvt[rtask] & flag;
+
+    /* Clear only those bits which user wants... */
+    gki_cb.com.OSWaitEvt[rtask] &= ~flag;
+
+    /* unlock thread_evt_mutex as pthread_cond_wait() does auto lock mutex when cond is met */
+    pthread_mutex_unlock(&gki_cb.os.thread_evt_mutex[rtask]);
+
+    GKI_TRACE("GKI_wait %d %x %d %x done", (int)rtask, (int)flag, (int)timeout, (int)evt);
+    return (evt);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_delay
+**
+** Description      This function is called by tasks to sleep unconditionally
+**                  for a specified amount of time. The duration is in milliseconds
+**
+** Parameters:      timeout -    (input) the duration in milliseconds
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void GKI_delay (UINT32 timeout)
+{
+    UINT8 rtask = GKI_get_taskid();
+    struct timespec delay;
+    int err;
+
+    GKI_TRACE("GKI_delay %d %d", (int)rtask, (int)timeout);
+
+    delay.tv_sec = timeout / 1000;
+    delay.tv_nsec = 1000 * 1000 * (timeout%1000);
+
+    /* [u]sleep can't be used because it uses SIGALRM */
+
+    do {
+        err = nanosleep(&delay, &delay);
+    } while (err < 0 && errno ==EINTR);
+
+    /* Check if task was killed while sleeping */
+
+     /* NOTE : if you do not implement task killing, you do not need this check */
+
+    if (rtask && gki_cb.com.OSRdyTbl[rtask] == TASK_DEAD)
+    {
+    }
+
+    GKI_TRACE("GKI_delay %d %d done", (int)rtask, (int)timeout);
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_send_event
+**
+** Description      This function is called by tasks to send events to other
+**                  tasks. Tasks can also send events to themselves.
+**
+** Parameters:      task_id -  (input) The id of the task to which the event has to
+**                  be sent
+**                  event   -  (input) The event that has to be sent
+**
+**
+** Returns          GKI_SUCCESS if all OK, else GKI_FAILURE
+**
+*******************************************************************************/
+
+UINT8 GKI_send_event (UINT8 task_id, UINT16 event)
+{
+    GKI_TRACE("GKI_send_event %d %x", task_id, event);
+
+    /* use efficient coding to avoid pipeline stalls */
+    if (task_id < GKI_MAX_TASKS)
+    {
+        /* protect OSWaitEvt[task_id] from manipulation in GKI_wait() */
+        pthread_mutex_lock(&gki_cb.os.thread_evt_mutex[task_id]);
+
+        /* Set the event bit */
+        gki_cb.com.OSWaitEvt[task_id] |= event;
+
+        pthread_cond_signal(&gki_cb.os.thread_evt_cond[task_id]);
+
+        pthread_mutex_unlock(&gki_cb.os.thread_evt_mutex[task_id]);
+
+        GKI_TRACE("GKI_send_event %d %x done", task_id, event);
+        return ( GKI_SUCCESS );
+    }
+    GKI_TRACE("############## GKI_send_event FAILED!! ##################");
+    return (GKI_FAILURE);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_isend_event
+**
+** Description      This function is called from ISRs to send events to other
+**                  tasks. The only difference between this function and GKI_send_event
+**                  is that this function assumes interrupts are already disabled.
+**
+** Parameters:      task_id -  (input) The destination task Id for the event.
+**                  event   -  (input) The event flag
+**
+** Returns          GKI_SUCCESS if all OK, else GKI_FAILURE
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to use it in your own implementation,
+**                  put your code here, otherwise you can delete the entire
+**                  body of the function.
+**
+*******************************************************************************/
+UINT8 GKI_isend_event (UINT8 task_id, UINT16 event)
+{
+    GKI_TRACE("GKI_isend_event %d %x", task_id, event);
+    GKI_TRACE("GKI_isend_event %d %x done", task_id, event);
+    return    GKI_send_event(task_id, event);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_get_taskid
+**
+** Description      This function gets the currently running task ID.
+**
+** Returns          task ID
+**
+** NOTE             The Broadcom upper stack and profiles may run as a single task.
+**                  If you only have one GKI task, then you can hard-code this
+**                  function to return a '1'. Otherwise, you should have some
+**                  OS-specific method to determine the current task.
+**
+*******************************************************************************/
+UINT8 GKI_get_taskid (void)
+{
+    int i;
+
+    pthread_t thread_id = pthread_self( );
+
+    GKI_TRACE("GKI_get_taskid %x", (int)thread_id);
+
+    for (i = 0; i < GKI_MAX_TASKS; i++) {
+        if (gki_cb.os.thread_id[i] == thread_id) {
+            //GKI_TRACE("GKI_get_taskid %x %d done", thread_id, i);
+            return(i);
+        }
+    }
+
+    GKI_TRACE("GKI_get_taskid: task id = -1");
+
+    return(-1);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_map_taskname
+**
+** Description      This function gets the task name of the taskid passed as arg.
+**                  If GKI_MAX_TASKS is passed as arg the currently running task
+**                  name is returned
+**
+** Parameters:      task_id -  (input) The id of the task whose name is being
+**                  sought. GKI_MAX_TASKS is passed to get the name of the
+**                  currently running task.
+**
+** Returns          pointer to task name
+**
+** NOTE             this function needs no customization
+**
+*******************************************************************************/
+
+INT8 *GKI_map_taskname (UINT8 task_id)
+{
+    GKI_TRACE("GKI_map_taskname %d", task_id);
+
+    if (task_id < GKI_MAX_TASKS)
+    {
+        GKI_TRACE("GKI_map_taskname %d %s done", task_id, gki_cb.com.OSTName[task_id]);
+         return (gki_cb.com.OSTName[task_id]);
+    }
+    else if (task_id == GKI_MAX_TASKS )
+    {
+        return (gki_cb.com.OSTName[GKI_get_taskid()]);
+    }
+    else
+    {
+        return (INT8*)"BAD";
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_enable
+**
+** Description      This function enables interrupts.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GKI_enable (void)
+{
+    //GKI_TRACE("GKI_enable");
+    pthread_mutex_unlock(&gki_cb.os.GKI_mutex);
+    //GKI_TRACE("Leaving GKI_enable");
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_disable
+**
+** Description      This function disables interrupts.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void GKI_disable (void)
+{
+    //GKI_TRACE("GKI_disable");
+
+    pthread_mutex_lock(&gki_cb.os.GKI_mutex);
+
+    //GKI_TRACE("Leaving GKI_disable");
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_exception
+**
+** Description      This function throws an exception.
+**                  This is normally only called for a nonrecoverable error.
+**
+** Parameters:      code    -  (input) The code for the error
+**                  msg     -  (input) The message that has to be logged
+**
+** Returns          void
+**
+*******************************************************************************/
+
+void GKI_exception (UINT16 code, char *msg)
+{
+    UINT8 task_id;
+    int i = 0;
+
+    GKI_ERROR_LOG( "GKI_exception(): Task State Table\n");
+
+    for(task_id = 0; task_id < GKI_MAX_TASKS; task_id++)
+    {
+        GKI_ERROR_LOG( "TASK ID [%d] task name [%s] state [%d]\n",
+                         task_id,
+                         gki_cb.com.OSTName[task_id],
+                         gki_cb.com.OSRdyTbl[task_id]);
+    }
+
+    GKI_ERROR_LOG("GKI_exception %d %s", code, msg);
+    GKI_ERROR_LOG( "\n********************************************************************\n");
+    GKI_ERROR_LOG( "* GKI_exception(): %d %s\n", code, msg);
+    GKI_ERROR_LOG( "********************************************************************\n");
+
+#if 0//(GKI_DEBUG == TRUE)
+    GKI_disable();
+
+    if (gki_cb.com.ExceptionCnt < GKI_MAX_EXCEPTION)
+    {
+        EXCEPTION_T *pExp;
+
+        pExp =  &gki_cb.com.Exception[gki_cb.com.ExceptionCnt++];
+        pExp->type = code;
+        pExp->taskid = GKI_get_taskid();
+        strncpy((char *)pExp->msg, msg, GKI_MAX_EXCEPTION_MSGLEN - 1);
+    }
+
+    GKI_enable();
+#endif
+
+    GKI_TRACE("GKI_exception %d %s done", code, msg);
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_get_time_stamp
+**
+** Description      This function formats the time into a user area
+**
+** Parameters:      tbuf -  (output) the address to the memory containing the
+**                  formatted time
+**
+** Returns          the address of the user area containing the formatted time
+**                  The format of the time is ????
+**
+** NOTE             This function is only called by OBEX.
+**
+*******************************************************************************/
+INT8 *GKI_get_time_stamp (INT8 *tbuf)
+{
+    UINT32 ms_time;
+    UINT32 s_time;
+    UINT32 m_time;
+    UINT32 h_time;
+    INT8   *p_out = tbuf;
+
+    gki_cb.com.OSTicks = times(0);
+    ms_time = GKI_TICKS_TO_MS(gki_cb.com.OSTicks);
+    s_time  = ms_time/100;   /* 100 Ticks per second */
+    m_time  = s_time/60;
+    h_time  = m_time/60;
+
+    ms_time -= s_time*100;
+    s_time  -= m_time*60;
+    m_time  -= h_time*60;
+
+    *p_out++ = (INT8)((h_time / 10) + '0');
+    *p_out++ = (INT8)((h_time % 10) + '0');
+    *p_out++ = ':';
+    *p_out++ = (INT8)((m_time / 10) + '0');
+    *p_out++ = (INT8)((m_time % 10) + '0');
+    *p_out++ = ':';
+    *p_out++ = (INT8)((s_time / 10) + '0');
+    *p_out++ = (INT8)((s_time % 10) + '0');
+    *p_out++ = ':';
+    *p_out++ = (INT8)((ms_time / 10) + '0');
+    *p_out++ = (INT8)((ms_time % 10) + '0');
+    *p_out++ = ':';
+    *p_out   = 0;
+
+    return (tbuf);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_register_mempool
+**
+** Description      This function registers a specific memory pool.
+**
+** Parameters:      p_mem -  (input) pointer to the memory pool
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If your OS has different memory pools, you
+**                  can tell GKI the pool to use by calling this function.
+**
+*******************************************************************************/
+void GKI_register_mempool (void *p_mem)
+{
+    gki_cb.com.p_user_mempool = p_mem;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         GKI_os_malloc
+**
+** Description      This function allocates memory
+**
+** Parameters:      size -  (input) The size of the memory that has to be
+**                  allocated
+**
+** Returns          the address of the memory allocated, or NULL if failed
+**
+** NOTE             This function is called by the Broadcom stack when
+**                  dynamic memory allocation is used. (see dyn_mem.h)
+**
+*******************************************************************************/
+void *GKI_os_malloc (UINT32 size)
+{
+    return (malloc(size));
+}
+
+/*******************************************************************************
+**
+** Function         GKI_os_free
+**
+** Description      This function frees memory
+**
+** Parameters:      size -  (input) The address of the memory that has to be
+**                  freed
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. It is only called from within GKI if dynamic
+**
+*******************************************************************************/
+void GKI_os_free (void *p_mem)
+{
+    if(p_mem != NULL)
+        free(p_mem);
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_suspend_task()
+**
+** Description      This function suspends the task specified in the argument.
+**
+** Parameters:      task_id  - (input) the id of the task that has to suspended
+**
+** Returns          GKI_SUCCESS if all OK, else GKI_FAILURE
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to implement task suspension capability,
+**                  put specific code here.
+**
+*******************************************************************************/
+UINT8 GKI_suspend_task (UINT8 task_id)
+{
+    GKI_TRACE("GKI_suspend_task %d - NOT implemented", task_id);
+
+
+    GKI_TRACE("GKI_suspend_task %d done", task_id);
+
+    return (GKI_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_resume_task()
+**
+** Description      This function resumes the task specified in the argument.
+**
+** Parameters:      task_id  - (input) the id of the task that has to resumed
+**
+** Returns          GKI_SUCCESS if all OK
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to implement task suspension capability,
+**                  put specific code here.
+**
+*******************************************************************************/
+UINT8 GKI_resume_task (UINT8 task_id)
+{
+    GKI_TRACE("GKI_resume_task %d - NOT implemented", task_id);
+
+
+    GKI_TRACE("GKI_resume_task %d done", task_id);
+
+    return (GKI_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_exit_task
+**
+** Description      This function is called to stop a GKI task.
+**
+** Parameters:      task_id  - (input) the id of the task that has to be stopped
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to use it in your own implementation,
+**                  put specific code here to kill a task.
+**
+*******************************************************************************/
+void GKI_exit_task (UINT8 task_id)
+{
+    GKI_disable();
+    gki_cb.com.OSRdyTbl[task_id] = TASK_DEAD;
+
+    /* Destroy mutex and condition variable objects */
+    pthread_mutex_destroy(&gki_cb.os.thread_evt_mutex[task_id]);
+    pthread_cond_destroy (&gki_cb.os.thread_evt_cond[task_id]);
+    pthread_mutex_destroy(&gki_cb.os.thread_timeout_mutex[task_id]);
+    pthread_cond_destroy (&gki_cb.os.thread_timeout_cond[task_id]);
+
+    GKI_enable();
+
+    //GKI_send_event(task_id, EVENT_MASK(GKI_SHUTDOWN_EVT));
+
+    GKI_INFO("GKI_exit_task %d done", task_id);
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_sched_lock
+**
+** Description      This function is called by tasks to disable scheduler
+**                  task context switching.
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to use it in your own implementation,
+**                  put code here to tell the OS to disable context switching.
+**
+*******************************************************************************/
+void GKI_sched_lock(void)
+{
+    GKI_TRACE("GKI_sched_lock");
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         GKI_sched_unlock
+**
+** Description      This function is called by tasks to enable scheduler switching.
+**
+** Returns          void
+**
+** NOTE             This function is NOT called by the Broadcom stack and
+**                  profiles. If you want to use it in your own implementation,
+**                  put code here to tell the OS to re-enable context switching.
+**
+*******************************************************************************/
+void GKI_sched_unlock(void)
+{
+    GKI_TRACE("GKI_sched_unlock");
+}
+
+
diff --git a/hci/Android.mk b/hci/Android.mk
new file mode 100644
index 0000000..f2a63e5
--- /dev/null
+++ b/hci/Android.mk
@@ -0,0 +1,41 @@
+LOCAL_PATH := $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES := \
+        src/bt_hci_bdroid.c \
+        src/lpm.c \
+        src/bt_hw.c \
+        src/btsnoop.c \
+        src/utils.c
+
+ifeq ($(BLUETOOTH_HCI_USE_MCT),true)
+
+LOCAL_CFLAGS := -DHCI_USE_MCT
+
+LOCAL_SRC_FILES += \
+        src/hci_mct.c \
+        src/userial_mct.c
+
+else
+
+LOCAL_SRC_FILES += \
+        src/hci_h4.c \
+        src/userial.c
+
+endif
+
+LOCAL_C_INCLUDES += \
+        $(LOCAL_PATH)/include \
+        $(LOCAL_PATH)/../utils/include
+
+LOCAL_SHARED_LIBRARIES := \
+        libcutils \
+        libdl \
+        libbt-utils
+
+LOCAL_MODULE := libbt-hci
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/hci/include/bt_hci_bdroid.h b/hci/include/bt_hci_bdroid.h
new file mode 100644
index 0000000..5681e85
--- /dev/null
+++ b/hci/include/bt_hci_bdroid.h
@@ -0,0 +1,156 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      bt_hci_bdroid.h
+ *
+ *  Description:   A wrapper header file of bt_hci_lib.h
+ *
+ *                 Contains definitions specific for interfacing with Bluedroid
+ *                 Bluetooth stack
+ *
+ ******************************************************************************/
+
+#ifndef BT_HCI_BDROID_H
+#define BT_HCI_BDROID_H
+
+#include "bt_hci_lib.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef FALSE
+#define FALSE  0
+#endif
+
+#ifndef TRUE
+#define TRUE   (!FALSE)
+#endif
+
+#ifndef BTHC_LINUX_BASE_POLICY
+#define BTHC_LINUX_BASE_POLICY SCHED_NORMAL
+#endif
+
+#if (BTHC_LINUX_BASE_POLICY != SCHED_NORMAL)
+#ifndef BTHC_LINUX_BASE_PRIORITY
+#define BTHC_LINUX_BASE_PRIORITY 30
+#endif
+
+#ifndef BTHC_USERIAL_READ_THREAD_PRIORITY
+#define BTHC_USERIAL_READ_THREAD_PRIORITY (BTHC_LINUX_BASE_PRIORITY)
+#endif
+
+#ifndef BTHC_MAIN_THREAD_PRIORITY
+#define BTHC_MAIN_THREAD_PRIORITY (BTHC_LINUX_BASE_PRIORITY-1)
+#endif
+#endif  // (BTHC_LINUX_BASE_POLICY != SCHED_NORMAL)
+
+#ifndef BTHC_USERIAL_READ_MEM_SIZE
+#define BTHC_USERIAL_READ_MEM_SIZE (1024)
+#endif
+
+#ifndef BTSNOOPDISP_INCLUDED
+#define BTSNOOPDISP_INCLUDED TRUE
+#endif
+
+/* Disable external parser for production */
+#ifndef BTSNOOP_EXT_PARSER_INCLUDED
+#define BTSNOOP_EXT_PARSER_INCLUDED FALSE
+#endif
+
+/* Host/Controller lib internal event ID */
+#define HC_EVENT_PRELOAD               0x0001
+#define HC_EVENT_POSTLOAD              0x0002
+#define HC_EVENT_RX                    0x0004
+#define HC_EVENT_TX                    0x0008
+#define HC_EVENT_LPM_ENABLE            0x0010
+#define HC_EVENT_LPM_DISABLE           0x0020
+#define HC_EVENT_LPM_WAKE_DEVICE       0x0040
+#define HC_EVENT_LPM_ALLOW_SLEEP       0x0080
+#define HC_EVENT_LPM_IDLE_TIMEOUT      0x0100
+#define HC_EVENT_EXIT                  0x0200
+
+/* Message event mask across Host/Controller lib and stack */
+#define MSG_EVT_MASK                    0xFF00 /* eq. BT_EVT_MASK */
+#define MSG_SUB_EVT_MASK                0x00FF /* eq. BT_SUB_EVT_MASK */
+
+/* Message event ID passed from Host/Controller lib to stack */
+#define MSG_HC_TO_STACK_HCI_ERR        0x1300 /* eq. BT_EVT_TO_BTU_HCIT_ERR */
+#define MSG_HC_TO_STACK_HCI_ACL        0x1100 /* eq. BT_EVT_TO_BTU_HCI_ACL */
+#define MSG_HC_TO_STACK_HCI_SCO        0x1200 /* eq. BT_EVT_TO_BTU_HCI_SCO */
+#define MSG_HC_TO_STACK_HCI_EVT        0x1000 /* eq. BT_EVT_TO_BTU_HCI_EVT */
+#define MSG_HC_TO_STACK_L2C_SEG_XMIT   0x1900 /* eq. BT_EVT_TO_BTU_L2C_SEG_XMIT */
+
+/* Message event ID passed from stack to vendor lib */
+#define MSG_STACK_TO_HC_HCI_ACL        0x2100 /* eq. BT_EVT_TO_LM_HCI_ACL */
+#define MSG_STACK_TO_HC_HCI_SCO        0x2200 /* eq. BT_EVT_TO_LM_HCI_SCO */
+#define MSG_STACK_TO_HC_HCI_CMD        0x2000 /* eq. BT_EVT_TO_LM_HCI_CMD */
+
+/* Local Bluetooth Controller ID for BR/EDR */
+#define LOCAL_BR_EDR_CONTROLLER_ID      0
+
+/******************************************************************************
+**  Type definitions and return values
+******************************************************************************/
+
+typedef struct
+{
+    uint16_t          event;
+    uint16_t          len;
+    uint16_t          offset;
+    uint16_t          layer_specific;
+} HC_BT_HDR;
+
+#define BT_HC_HDR_SIZE (sizeof(HC_BT_HDR))
+
+
+typedef struct _hc_buffer_hdr
+{
+    struct _hc_buffer_hdr *p_next;   /* next buffer in the queue */
+    uint8_t   reserved1;
+    uint8_t   reserved2;
+    uint8_t   reserved3;
+    uint8_t   reserved4;
+} HC_BUFFER_HDR_T;
+
+#define BT_HC_BUFFER_HDR_SIZE (sizeof(HC_BUFFER_HDR_T))
+
+/******************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+extern bt_hc_callbacks_t *bt_hc_cbacks;
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function        bthc_signal_event
+**
+** Description     Perform context switch to bt_hc main thread
+**
+** Returns         None
+**
+*******************************************************************************/
+extern void bthc_signal_event(uint16_t event);
+
+#endif /* BT_HCI_BDROID_H */
diff --git a/hci/include/bt_hci_lib.h b/hci/include/bt_hci_lib.h
new file mode 100644
index 0000000..468e513
--- /dev/null
+++ b/hci/include/bt_hci_lib.h
@@ -0,0 +1,202 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_HCI_LIB_H
+#define BT_HCI_LIB_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+/** Struct types */
+
+
+/** Typedefs and defines */
+
+/* Generic purpose transac returned upon request complete */
+typedef void* TRANSAC;
+
+/** Bluetooth Power Control States */
+typedef enum {
+    BT_HC_CHIP_PWR_OFF,
+    BT_HC_CHIP_PWR_ON,
+}  bt_hc_chip_power_state_t;
+
+/** Bluetooth Low Power Mode */
+typedef enum {
+    BT_HC_LPM_DISABLE,
+    BT_HC_LPM_ENABLE,
+    BT_HC_LPM_WAKE_ASSERT,
+    BT_HC_LPM_WAKE_DEASSERT,
+} bt_hc_low_power_event_t;
+
+/** Receive flow control */
+typedef enum {
+    BT_RXFLOW_OFF, /* add transport device fd to select set */
+    BT_RXFLOW_ON,  /* remove transport device to from select set */
+} bt_rx_flow_state_t;
+
+/** HCI logging control */
+typedef enum {
+    BT_HC_LOGGING_OFF,
+    BT_HC_LOGGING_ON,
+} bt_hc_logging_state_t;
+
+/** Result of write request */
+typedef enum {
+    BT_HC_TX_SUCCESS,  /* a buffer is fully processed and can be released */
+    BT_HC_TX_FAIL,     /* transmit fail */
+    BT_HC_TX_FRAGMENT, /* send split ACL pkt back to stack to reprocess */
+} bt_hc_transmit_result_t;
+
+/** Result of preload initialization */
+typedef enum {
+    BT_HC_PRELOAD_SUCCESS,
+    BT_HC_PRELOAD_FAIL,
+} bt_hc_preload_result_t;
+
+/** Result of postload initialization */
+typedef enum {
+    BT_HC_POSTLOAD_SUCCESS,
+    BT_HC_POSTLOAD_FAIL,
+} bt_hc_postload_result_t;
+
+/** Result of low power enable/disable request */
+typedef enum {
+    BT_HC_LPM_DISABLED,
+    BT_HC_LPM_ENABLED,
+} bt_hc_lpm_request_result_t;
+
+/** Host/Controller Library Return Status */
+typedef enum {
+    BT_HC_STATUS_SUCCESS,
+    BT_HC_STATUS_FAIL,
+    BT_HC_STATUS_NOT_READY,
+    BT_HC_STATUS_NOMEM,
+    BT_HC_STATUS_BUSY,
+    BT_HC_STATUS_CORRUPTED_BUFFER
+} bt_hc_status_t;
+
+
+/* Section comment */
+
+/*
+ * Bluetooth Host/Controller callback structure.
+ */
+
+/* called upon bt host wake signal */
+typedef void (*hostwake_ind_cb)(bt_hc_low_power_event_t event);
+
+/* preload initialization callback */
+typedef void (*preload_result_cb)(TRANSAC transac, bt_hc_preload_result_t result);
+
+/* postload initialization callback */
+typedef void (*postload_result_cb)(TRANSAC transac, bt_hc_postload_result_t result);
+
+/* lpm enable/disable callback */
+typedef void (*lpm_result_cb)(bt_hc_lpm_request_result_t result);
+
+/* datapath buffer allocation callback (callout) */
+typedef char* (*alloc_mem_cb)(int size);
+
+/* datapath buffer deallocation callback (callout) */
+typedef int (*dealloc_mem_cb)(TRANSAC transac, char *p_buf);
+
+/* transmit result callback */
+typedef int (*tx_result_cb)(TRANSAC transac, char *p_buf, bt_hc_transmit_result_t result);
+
+/* a previously setup buffer is read and available for processing
+   buffer is deallocated in stack when processed */
+typedef int (*data_ind_cb)(TRANSAC transac, char *p_buf, int len);
+
+typedef struct {
+    /** set to sizeof(bt_hc_callbacks_t) */
+    size_t         size;
+
+    /* notifies caller result of preload request */
+    preload_result_cb  preload_cb;
+
+    /* notifies caller result of postload request */
+    postload_result_cb  postload_cb;
+
+    /* notifies caller result of lpm enable/disable */
+    lpm_result_cb  lpm_cb;
+
+    /* notifies hardware on host wake state */
+    hostwake_ind_cb       hostwake_ind;
+
+    /* buffer allocation request */
+    alloc_mem_cb   alloc;
+
+    /* buffer deallocation request */
+    dealloc_mem_cb dealloc;
+
+    /* notifies stack data is available */
+    data_ind_cb data_ind;
+
+    /* notifies caller when a buffer is transmitted (or failed) */
+    tx_result_cb  tx_result;
+} bt_hc_callbacks_t;
+
+/*
+ * Bluetooth Host/Controller Interface
+ */
+typedef struct {
+    /** Set to sizeof(bt_hc_interface_t) */
+    size_t          size;
+
+    /**
+     * Opens the interface and provides the callback routines
+     * to the implemenation of this interface.
+     */
+    int   (*init)(const bt_hc_callbacks_t* p_cb, unsigned char *local_bdaddr);
+
+    /** Chip power control */
+    void (*set_power)(bt_hc_chip_power_state_t state);
+
+    /** Set low power mode wake */
+    int   (*lpm)(bt_hc_low_power_event_t event);
+
+    /** Called prior to stack initialization */
+    void (*preload)(TRANSAC transac);
+
+    /** Called post stack initialization */
+    void (*postload)(TRANSAC transac);
+
+    /** Transmit buffer */
+    int (*transmit_buf)(TRANSAC transac, char *p_buf, int len);
+
+    /** Controls receive flow */
+    int (*set_rxflow)(bt_rx_flow_state_t state);
+
+    /** Controls HCI logging on/off */
+    int (*logging)(bt_hc_logging_state_t state, char *p_path);
+
+    /** Closes the interface */
+    void  (*cleanup)( void );
+} bt_hc_interface_t;
+
+
+/*
+ * External shared lib functions
+ */
+
+extern const bt_hc_interface_t* bt_hc_get_interface(void);
+
+#endif /* BT_HCI_LIB_H */
+
diff --git a/hci/include/bt_vendor_lib.h b/hci/include/bt_vendor_lib.h
new file mode 100644
index 0000000..054e317
--- /dev/null
+++ b/hci/include/bt_vendor_lib.h
@@ -0,0 +1,323 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_VENDOR_LIB_H
+#define BT_VENDOR_LIB_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <sys/types.h>
+
+/** Struct types */
+
+
+/** Typedefs and defines */
+
+/** Vendor specific operations OPCODE */
+typedef enum {
+/*  [operation]
+ *      Power on or off the BT Controller.
+ *  [input param]
+ *      A pointer to int type with content of bt_vendor_power_state_t.
+ *      Typecasting conversion: (int *) param.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      None.
+ */
+    BT_VND_OP_POWER_CTRL,
+
+/*  [operation]
+ *      Perform any vendor specific initialization or configuration
+ *      on the BT Controller. This is called before stack initialization.
+ *  [input param]
+ *      None.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      Must call fwcfg_cb to notify the stack of the completion of vendor
+ *      specific initialization once it has been done.
+ */
+    BT_VND_OP_FW_CFG,
+
+/*  [operation]
+ *      Perform any vendor specific SCO/PCM configuration on the BT Controller.
+ *      This is called after stack initialization.
+ *  [input param]
+ *      None.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      Must call scocfg_cb to notify the stack of the completion of vendor
+ *      specific SCO configuration once it has been done.
+ */
+    BT_VND_OP_SCO_CFG,
+
+/*  [operation]
+ *      Open UART port on where the BT Controller is attached.
+ *      This is called before stack initialization.
+ *  [input param]
+ *      A pointer to int array type for open file descriptors.
+ *      The mapping of HCI channel to fd slot in the int array is given in
+ *      bt_vendor_hci_channels_t.
+ *      And, it requires the vendor lib to fill up the content before returning
+ *      the call.
+ *      Typecasting conversion: (int (*)[]) param.
+ *  [return]
+ *      Numbers of opened file descriptors.
+     *      Valid number:
+     *          1 - CMD/EVT/ACL-In/ACL-Out via the same fd (e.g. UART)
+     *          2 - CMD/EVT on one fd, and ACL-In/ACL-Out on the other fd
+     *          4 - CMD, EVT, ACL-In, ACL-Out are on their individual fd
+ *  [callback]
+ *      None.
+ */
+    BT_VND_OP_USERIAL_OPEN,
+
+/*  [operation]
+ *      Close the previously opened UART port.
+ *  [input param]
+ *      None.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      None.
+ */
+    BT_VND_OP_USERIAL_CLOSE,
+
+/*  [operation]
+ *      Get the LPM idle timeout in milliseconds.
+ *      The stack uses this information to launch a timer delay before it
+ *      attempts to de-assert LPM WAKE signal once downstream HCI packet
+ *      has been delivered.
+ *  [input param]
+ *      A pointer to uint32_t type which is passed in by the stack. And, it
+ *      requires the vendor lib to fill up the content before returning
+ *      the call.
+ *      Typecasting conversion: (uint32_t *) param.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      None.
+ */
+    BT_VND_OP_GET_LPM_IDLE_TIMEOUT,
+
+/*  [operation]
+ *      Enable or disable LPM mode on BT Controller.
+ *  [input param]
+ *      A pointer to uint8_t type with content of bt_vendor_lpm_mode_t.
+ *      Typecasting conversion: (uint8_t *) param.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      Must call lpm_cb to notify the stack of the completion of LPM
+ *      disable/enable process once it has been done.
+ */
+    BT_VND_OP_LPM_SET_MODE,
+
+/*  [operation]
+ *      Assert or Deassert LPM WAKE on BT Controller.
+ *  [input param]
+ *      A pointer to uint8_t type with content of bt_vendor_lpm_wake_state_t.
+ *      Typecasting conversion: (uint8_t *) param.
+ *  [return]
+ *      0 - default, don't care.
+ *  [callback]
+ *      None.
+ */
+    BT_VND_OP_LPM_WAKE_SET_STATE,
+} bt_vendor_opcode_t;
+
+/** Power on/off control states */
+typedef enum {
+    BT_VND_PWR_OFF,
+    BT_VND_PWR_ON,
+}  bt_vendor_power_state_t;
+
+/** Define HCI channel identifier in the file descriptors array
+    used in BT_VND_OP_USERIAL_OPEN operation.
+ */
+typedef enum {
+    CH_CMD,     // HCI Command channel
+    CH_EVT,     // HCI Event channel
+    CH_ACL_OUT, // HCI ACL downstream channel
+    CH_ACL_IN,  // HCI ACL upstream channel
+
+    CH_MAX      // Total channels
+}  bt_vendor_hci_channels_t;
+
+/** LPM disable/enable request */
+typedef enum {
+    BT_VND_LPM_DISABLE,
+    BT_VND_LPM_ENABLE,
+} bt_vendor_lpm_mode_t;
+
+/** LPM WAKE set state request */
+typedef enum {
+    BT_VND_LPM_WAKE_ASSERT,
+    BT_VND_LPM_WAKE_DEASSERT,
+} bt_vendor_lpm_wake_state_t;
+
+/** Callback result values */
+typedef enum {
+    BT_VND_OP_RESULT_SUCCESS,
+    BT_VND_OP_RESULT_FAIL,
+} bt_vendor_op_result_t;
+
+/*
+ * Bluetooth Host/Controller Vendor callback structure.
+ */
+
+/* vendor initialization/configuration callback */
+typedef void (*cfg_result_cb)(bt_vendor_op_result_t result);
+
+/* datapath buffer allocation callback (callout)
+ *
+ *  Vendor lib needs to request a buffer through the alloc callout function
+ *  from HCI lib if the buffer is for constructing a HCI Command packet which
+ *  will be sent through xmit_cb to BT Controller.
+ *
+ *  For each buffer allocation, the requested size needs to be big enough to
+ *  accommodate the below header plus a complete HCI packet --
+ *      typedef struct
+ *      {
+ *          uint16_t          event;
+ *          uint16_t          len;
+ *          uint16_t          offset;
+ *          uint16_t          layer_specific;
+ *      } HC_BT_HDR;
+ *
+ *  HCI lib returns a pointer to the buffer where Vendor lib should use to
+ *  construct a HCI command packet as below format:
+ *
+ *  --------------------------------------------
+ *  |  HC_BT_HDR  |  HCI command               |
+ *  --------------------------------------------
+ *  where
+ *      HC_BT_HDR.event = 0x2000;
+ *      HC_BT_HDR.len = Length of HCI command;
+ *      HC_BT_HDR.offset = 0;
+ *      HC_BT_HDR.layer_specific = 0;
+ *
+ *  For example, a HCI_RESET Command will be formed as
+ *  ------------------------
+ *  |  HC_BT_HDR  |03|0c|00|
+ *  ------------------------
+ *  with
+ *      HC_BT_HDR.event = 0x2000;
+ *      HC_BT_HDR.len = 3;
+ *      HC_BT_HDR.offset = 0;
+ *      HC_BT_HDR.layer_specific = 0;
+ */
+typedef void* (*malloc_cb)(int size);
+
+/* datapath buffer deallocation callback (callout) */
+typedef void (*mdealloc_cb)(void *p_buf);
+
+/* define callback of the cmd_xmit_cb
+ *
+ *  The callback function which HCI lib will call with the return of command
+ *  complete packet. Vendor lib is responsible for releasing the buffer passed
+ *  in at the p_mem parameter by calling dealloc callout function.
+ */
+typedef void (*tINT_CMD_CBACK)(void *p_mem);
+
+/* hci command packet transmit callback (callout)
+ *
+ *  Vendor lib calls xmit_cb callout function in order to send a HCI Command
+ *  packet to BT Controller. The buffer carrying HCI Command packet content
+ *  needs to be first allocated through the alloc callout function.
+ *  HCI lib will release the buffer for Vendor lib once it has delivered the
+ *  packet content to BT Controller.
+ *
+ *  Vendor lib needs also provide a callback function (p_cback) which HCI lib
+ *  will call with the return of command complete packet.
+ *
+ *  The opcode parameter gives the HCI OpCode (combination of OGF and OCF) of
+ *  HCI Command packet. For example, opcode = 0x0c03 for the HCI_RESET command
+ *  packet.
+ */
+typedef uint8_t (*cmd_xmit_cb)(uint16_t opcode, void *p_buf, tINT_CMD_CBACK p_cback);
+
+typedef struct {
+    /** set to sizeof(bt_vendor_callbacks_t) */
+    size_t         size;
+
+    /*
+     * Callback and callout functions have implemented in HCI libray
+     * (libbt-hci.so).
+     */
+
+    /* notifies caller result of firmware configuration request */
+    cfg_result_cb  fwcfg_cb;
+
+    /* notifies caller result of sco configuration request */
+    cfg_result_cb  scocfg_cb;
+
+    /* notifies caller result of lpm enable/disable */
+    cfg_result_cb  lpm_cb;
+
+    /* buffer allocation request */
+    malloc_cb   alloc;
+
+    /* buffer deallocation request */
+    mdealloc_cb dealloc;
+
+    /* hci command packet transmit request */
+    cmd_xmit_cb xmit_cb;
+} bt_vendor_callbacks_t;
+
+/*
+ * Bluetooth Host/Controller VENDOR Interface
+ */
+typedef struct {
+    /** Set to sizeof(bt_vndor_interface_t) */
+    size_t          size;
+
+    /*
+     * Functions need to be implemented in Vendor libray (libbt-vendor.so).
+     */
+
+    /**
+     * Caller will open the interface and pass in the callback routines
+     * to the implemenation of this interface.
+     */
+    int   (*init)(const bt_vendor_callbacks_t* p_cb, unsigned char *local_bdaddr);
+
+    /**  Vendor specific operations */
+    int (*op)(bt_vendor_opcode_t opcode, void *param);
+
+    /** Closes the interface */
+    void  (*cleanup)(void);
+} bt_vendor_interface_t;
+
+
+/*
+ * External shared lib functions/data
+ */
+
+/* Entry point of DLib --
+ *      Vendor library needs to implement the body of bt_vendor_interface_t
+ *      structure and uses the below name as the variable name. HCI library
+ *      will use this symbol name to get address of the object through the
+ *      dlsym call.
+ */
+extern const bt_vendor_interface_t BLUETOOTH_VENDOR_LIB_INTERFACE;
+
+#endif /* BT_VENDOR_LIB_H */
+
diff --git a/hci/include/hci.h b/hci/include/hci.h
new file mode 100644
index 0000000..0bfec2b
--- /dev/null
+++ b/hci/include/hci.h
@@ -0,0 +1,86 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      hci.h
+ *
+ *  Description:   Contains definitions used for HCI transport controls
+ *
+ ******************************************************************************/
+
+#ifndef HCI_H
+#define HCI_H
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+/******************************************************************************
+**  Type definitions
+******************************************************************************/
+
+/** Prototypes for HCI Service interface functions **/
+
+/* Initialize transport's control block */
+typedef void (*tHCI_INIT)(void);
+
+/* Do transport's control block clean-up */
+typedef void (*tHCI_CLEANUP)(void);
+
+/* Send HCI command/data to the transport */
+typedef void (*tHCI_SEND)(HC_BT_HDR *p_msg);
+
+/* Handler for HCI upstream path */
+typedef uint16_t (*tHCI_RCV)(void);
+
+/* Callback function for the returned event of internally issued command */
+typedef void (*tINT_CMD_CBACK)(void *p_mem);
+
+/* Handler for sending HCI command from the local module */
+typedef uint8_t (*tHCI_SEND_INT)(uint16_t opcode, HC_BT_HDR *p_buf, \
+                                  tINT_CMD_CBACK p_cback);
+
+/* Handler for getting acl data length */
+typedef void (*tHCI_ACL_DATA_LEN_HDLR)(void);
+
+/******************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+typedef struct {
+    tHCI_INIT init;
+    tHCI_CLEANUP cleanup;
+    tHCI_SEND send;
+    tHCI_SEND_INT send_int_cmd;
+    tHCI_ACL_DATA_LEN_HDLR get_acl_max_len;
+#ifdef HCI_USE_MCT
+    tHCI_RCV evt_rcv;
+    tHCI_RCV acl_rcv;
+#else
+    tHCI_RCV rcv;
+#endif
+} tHCI_IF;
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+
+#endif /* HCI_H */
+
diff --git a/hci/include/userial.h b/hci/include/userial.h
new file mode 100644
index 0000000..d3a5480
--- /dev/null
+++ b/hci/include/userial.h
@@ -0,0 +1,141 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      userial.h
+ *
+ *  Description:   Contains definitions used for serial port controls
+ *
+ ******************************************************************************/
+
+#ifndef USERIAL_H
+#define USERIAL_H
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+/**** port IDs ****/
+#define USERIAL_PORT_1          0
+#define USERIAL_PORT_2          1
+#define USERIAL_PORT_3          2
+#define USERIAL_PORT_4          3
+#define USERIAL_PORT_5          4
+#define USERIAL_PORT_6          5
+#define USERIAL_PORT_7          6
+#define USERIAL_PORT_8          7
+#define USERIAL_PORT_9          8
+#define USERIAL_PORT_10         9
+#define USERIAL_PORT_11         10
+#define USERIAL_PORT_12         11
+#define USERIAL_PORT_13         12
+#define USERIAL_PORT_14         13
+#define USERIAL_PORT_15         14
+#define USERIAL_PORT_16         15
+#define USERIAL_PORT_17         16
+#define USERIAL_PORT_18         17
+
+typedef enum {
+    USERIAL_OP_INIT,
+    USERIAL_OP_RXFLOW_ON,
+    USERIAL_OP_RXFLOW_OFF,
+} userial_ioctl_op_t;
+
+/******************************************************************************
+**  Type definitions
+******************************************************************************/
+
+/******************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function        userial_init
+**
+** Description     Initializes the userial driver
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_init(void);
+
+/*******************************************************************************
+**
+** Function        userial_open
+**
+** Description     Open Bluetooth device with the port ID
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_open(uint8_t port);
+
+/*******************************************************************************
+**
+** Function        userial_read
+**
+** Description     Read data from the userial port
+**
+** Returns         Number of bytes actually read from the userial port and
+**                 copied into p_data.  This may be less than len.
+**
+*******************************************************************************/
+uint16_t  userial_read(uint16_t msg_id, uint8_t *p_buffer, uint16_t len);
+
+/*******************************************************************************
+**
+** Function        userial_write
+**
+** Description     Write data to the userial port
+**
+** Returns         Number of bytes actually written to the userial port. This
+**                 may be less than len.
+**
+*******************************************************************************/
+uint16_t userial_write(uint16_t msg_id, uint8_t *p_data, uint16_t len);
+
+/*******************************************************************************
+**
+** Function        userial_close
+**
+** Description     Close the userial port
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_close(void);
+
+/*******************************************************************************
+**
+** Function        userial_ioctl
+**
+** Description     ioctl inteface
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_ioctl(userial_ioctl_op_t op, void *p_data);
+
+#endif /* USERIAL_H */
+
diff --git a/hci/include/utils.h b/hci/include/utils.h
new file mode 100644
index 0000000..0f1517c
--- /dev/null
+++ b/hci/include/utils.h
@@ -0,0 +1,194 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      utils.h
+ *
+ *  Description:   Utility functions declaration
+ *
+ ******************************************************************************/
+
+#ifndef UTILS_H
+#define UTILS_H
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define STREAM_TO_UINT16(u16, p) {u16 = ((uint16_t)(*(p)) + (((uint16_t)(*((p) + 1))) << 8)); (p) += 2;}
+#define UINT16_TO_STREAM(p, u16) {*(p)++ = (uint8_t)(u16); *(p)++ = (uint8_t)((u16) >> 8);}
+#define UINT32_TO_STREAM(p, u32) {*(p)++ = (uint8_t)(u32); *(p)++ = (uint8_t)((u32) >> 8); *(p)++ = (uint8_t)((u32) >> 16); *(p)++ = (uint8_t)((u32) >> 24);}
+
+/******************************************************************************
+**  Type definitions
+******************************************************************************/
+
+typedef struct
+{
+    void        *p_first;
+    void        *p_last;
+    uint16_t    count;
+} BUFFER_Q;
+
+/******************************************************************************
+**  Extern variables and functions
+******************************************************************************/
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function        utils_init
+**
+** Description     Utils initialization
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_init ();
+
+/*******************************************************************************
+**
+** Function        utils_cleanup
+**
+** Description     Utils cleanup
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_cleanup ();
+
+/*******************************************************************************
+**
+** Function        utils_queue_init
+**
+** Description     Initialize the given buffer queue
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_queue_init (BUFFER_Q *p_q);
+
+/*******************************************************************************
+**
+** Function        utils_enqueue
+**
+** Description     Enqueue a buffer at the tail of the given queue
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_enqueue (BUFFER_Q *p_q, void *p_buf);
+
+/*******************************************************************************
+**
+** Function        utils_dequeue
+**
+** Description     Dequeues a buffer from the head of the given queue
+**
+** Returns         NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *utils_dequeue (BUFFER_Q *p_q);
+
+/*******************************************************************************
+**
+** Function        utils_dequeue_unlocked
+**
+** Description     Dequeues a buffer from the head of the given queue without lock
+**
+** Returns         NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *utils_dequeue_unlocked (BUFFER_Q *p_q);
+
+/*******************************************************************************
+**
+** Function        utils_getnext
+**
+** Description     Return a pointer to the next buffer linked to the given buffer
+**
+** Returns         NULL if the given buffer does not point to any next buffer,
+**                 else next buffer address
+**
+*******************************************************************************/
+void *utils_getnext (void *p_buf);
+
+/*******************************************************************************
+**
+** Function        utils_remove_from_queue
+**
+** Description     Dequeue the given buffer from the middle of the given queue
+**
+** Returns         NULL if the given queue is empty, else the given buffer
+**
+*******************************************************************************/
+void *utils_remove_from_queue (BUFFER_Q *p_q, void *p_buf);
+
+/*******************************************************************************
+**
+** Function        utils_remove_from_queue_unlocked
+**
+** Description     Dequeue the given buffer from the middle of the given queue without lock
+**
+** Returns         NULL if the given queue is empty, else the given buffer
+**
+*******************************************************************************/
+void *utils_remove_from_queue_unlocked (BUFFER_Q *p_q, void *p_buf);
+
+
+/*******************************************************************************
+**
+** Function        utils_delay
+**
+** Description     sleep unconditionally for timeout milliseconds
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_delay (uint32_t timeout);
+
+/*******************************************************************************
+**
+** Function        utils_lock
+**
+** Description     application calls this function before entering critical
+**                 section
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_lock (void);
+
+/*******************************************************************************
+**
+** Function        utils_unlock
+**
+** Description     application calls this function when leaving critical
+**                 section
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_unlock (void);
+
+#endif /* UTILS_H */
+
diff --git a/hci/src/bt_hci_bdroid.c b/hci/src/bt_hci_bdroid.c
new file mode 100644
index 0000000..7b14eb3
--- /dev/null
+++ b/hci/src/bt_hci_bdroid.c
@@ -0,0 +1,505 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      bt_hci_bdroid.c
+ *
+ *  Description:   Bluedroid Bluetooth Host/Controller interface library
+ *                 implementation
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_hci_bdroid"
+
+#include <utils/Log.h>
+#include <pthread.h>
+#include "bt_hci_bdroid.h"
+#include "bt_vendor_lib.h"
+#include "utils.h"
+#include "hci.h"
+#include "userial.h"
+#include "bt_utils.h"
+#include <sys/prctl.h>
+
+#ifndef BTHC_DBG
+#define BTHC_DBG FALSE
+#endif
+
+#if (BTHC_DBG == TRUE)
+#define BTHCDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
+#else
+#define BTHCDBG(param, ...) {}
+#endif
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern bt_vendor_interface_t *bt_vnd_if;
+extern int num_hci_cmd_pkts;
+void lpm_init(void);
+void lpm_cleanup(void);
+void lpm_enable(uint8_t turn_on);
+void lpm_wake_deassert(void);
+void lpm_allow_bt_device_sleep(void);
+void lpm_wake_assert(void);
+void init_vnd_if(unsigned char *local_bdaddr);
+void btsnoop_open(char *p_path);
+void btsnoop_close(void);
+
+/******************************************************************************
+**  Variables
+******************************************************************************/
+
+bt_hc_callbacks_t *bt_hc_cbacks = NULL;
+BUFFER_Q tx_q;
+tHCI_IF *p_hci_if;
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+/* Host/Controller lib thread control block */
+typedef struct
+{
+    pthread_t       worker_thread;
+    pthread_mutex_t mutex;
+    pthread_cond_t  cond;
+} bt_hc_cb_t;
+
+/******************************************************************************
+**  Static Variables
+******************************************************************************/
+
+static bt_hc_cb_t hc_cb;
+static volatile uint8_t lib_running = 0;
+static volatile uint16_t ready_events = 0;
+static volatile uint8_t tx_cmd_pkts_pending = FALSE;
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+static void *bt_hc_worker_thread(void *arg);
+
+void bthc_signal_event(uint16_t event)
+{
+    pthread_mutex_lock(&hc_cb.mutex);
+    ready_events |= event;
+    pthread_cond_signal(&hc_cb.cond);
+    pthread_mutex_unlock(&hc_cb.mutex);
+}
+
+/*****************************************************************************
+**
+**   BLUETOOTH HOST/CONTROLLER INTERFACE LIBRARY FUNCTIONS
+**
+*****************************************************************************/
+
+static int init(const bt_hc_callbacks_t* p_cb, unsigned char *local_bdaddr)
+{
+    pthread_attr_t thread_attr;
+    struct sched_param param;
+    int policy, result;
+
+    ALOGI("init");
+
+    if (p_cb == NULL)
+    {
+        ALOGE("init failed with no user callbacks!");
+        return BT_HC_STATUS_FAIL;
+    }
+
+    /* store reference to user callbacks */
+    bt_hc_cbacks = (bt_hc_callbacks_t *) p_cb;
+
+    init_vnd_if(local_bdaddr);
+
+    utils_init();
+#ifdef HCI_USE_MCT
+    extern tHCI_IF hci_mct_func_table;
+    p_hci_if = &hci_mct_func_table;
+#else
+    extern tHCI_IF hci_h4_func_table;
+    p_hci_if = &hci_h4_func_table;
+#endif
+
+    p_hci_if->init();
+
+    userial_init();
+    lpm_init();
+
+    utils_queue_init(&tx_q);
+
+    if (lib_running)
+    {
+        ALOGW("init has been called repeatedly without calling cleanup ?");
+    }
+
+    lib_running = 1;
+    ready_events = 0;
+    pthread_mutex_init(&hc_cb.mutex, NULL);
+    pthread_cond_init(&hc_cb.cond, NULL);
+    pthread_attr_init(&thread_attr);
+
+    if (pthread_create(&hc_cb.worker_thread, &thread_attr, \
+                       bt_hc_worker_thread, NULL) != 0)
+    {
+        ALOGE("pthread_create failed!");
+        lib_running = 0;
+        return BT_HC_STATUS_FAIL;
+    }
+
+    if(pthread_getschedparam(hc_cb.worker_thread, &policy, &param)==0)
+    {
+        policy = BTHC_LINUX_BASE_POLICY;
+#if (BTHC_LINUX_BASE_POLICY!=SCHED_NORMAL)
+        param.sched_priority = BTHC_MAIN_THREAD_PRIORITY;
+#endif
+        result = pthread_setschedparam(hc_cb.worker_thread, policy, &param);
+        if (result != 0)
+        {
+            ALOGW("libbt-hci init: pthread_setschedparam failed (%s)", \
+                  strerror(result));
+        }
+    }
+
+    return BT_HC_STATUS_SUCCESS;
+}
+
+
+/** Chip power control */
+static void set_power(bt_hc_chip_power_state_t state)
+{
+    int pwr_state;
+
+    BTHCDBG("set_power %d", state);
+
+    /* Calling vendor-specific part */
+    pwr_state = (state == BT_HC_CHIP_PWR_ON) ? BT_VND_PWR_ON : BT_VND_PWR_OFF;
+
+    if (bt_vnd_if)
+        bt_vnd_if->op(BT_VND_OP_POWER_CTRL, &pwr_state);
+    else
+        ALOGE("vendor lib is missing!");
+}
+
+
+/** Configure low power mode wake state */
+static int lpm(bt_hc_low_power_event_t event)
+{
+    uint8_t status = TRUE;
+
+    switch (event)
+    {
+        case BT_HC_LPM_DISABLE:
+            bthc_signal_event(HC_EVENT_LPM_DISABLE);
+            break;
+
+        case BT_HC_LPM_ENABLE:
+            bthc_signal_event(HC_EVENT_LPM_ENABLE);
+            break;
+
+        case BT_HC_LPM_WAKE_ASSERT:
+            bthc_signal_event(HC_EVENT_LPM_WAKE_DEVICE);
+            break;
+
+        case BT_HC_LPM_WAKE_DEASSERT:
+            bthc_signal_event(HC_EVENT_LPM_ALLOW_SLEEP);
+            break;
+    }
+
+    return(status == TRUE) ? BT_HC_STATUS_SUCCESS : BT_HC_STATUS_FAIL;
+}
+
+
+/** Called prio to stack initialization */
+static void preload(TRANSAC transac)
+{
+    BTHCDBG("preload");
+    bthc_signal_event(HC_EVENT_PRELOAD);
+}
+
+
+/** Called post stack initialization */
+static void postload(TRANSAC transac)
+{
+    BTHCDBG("postload");
+    bthc_signal_event(HC_EVENT_POSTLOAD);
+}
+
+
+/** Transmit frame */
+static int transmit_buf(TRANSAC transac, char *p_buf, int len)
+{
+    utils_enqueue(&tx_q, (void *) transac);
+
+    bthc_signal_event(HC_EVENT_TX);
+
+    return BT_HC_STATUS_SUCCESS;
+}
+
+
+/** Controls receive flow */
+static int set_rxflow(bt_rx_flow_state_t state)
+{
+    BTHCDBG("set_rxflow %d", state);
+
+    userial_ioctl(\
+     ((state == BT_RXFLOW_ON) ? USERIAL_OP_RXFLOW_ON : USERIAL_OP_RXFLOW_OFF), \
+     NULL);
+
+    return BT_HC_STATUS_SUCCESS;
+}
+
+
+/** Controls HCI logging on/off */
+static int logging(bt_hc_logging_state_t state, char *p_path)
+{
+    BTHCDBG("logging %d", state);
+
+    if (state == BT_HC_LOGGING_ON)
+    {
+        if (p_path != NULL)
+            btsnoop_open(p_path);
+    }
+    else
+    {
+        btsnoop_close();
+    }
+
+    return BT_HC_STATUS_SUCCESS;
+}
+
+
+/** Closes the interface */
+static void cleanup( void )
+{
+    BTHCDBG("cleanup");
+
+    if (lib_running)
+    {
+        lib_running = 0;
+        bthc_signal_event(HC_EVENT_EXIT);
+        pthread_join(hc_cb.worker_thread, NULL);
+    }
+
+    lpm_cleanup();
+    userial_close();
+    p_hci_if->cleanup();
+    utils_cleanup();
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+        bt_vnd_if->cleanup();
+
+    bt_hc_cbacks = NULL;
+}
+
+
+static const bt_hc_interface_t bluetoothHCLibInterface = {
+    sizeof(bt_hc_interface_t),
+    init,
+    set_power,
+    lpm,
+    preload,
+    postload,
+    transmit_buf,
+    set_rxflow,
+    logging,
+    cleanup
+};
+
+
+/*******************************************************************************
+**
+** Function        bt_hc_worker_thread
+**
+** Description     Mian worker thread
+**
+** Returns         void *
+**
+*******************************************************************************/
+static void *bt_hc_worker_thread(void *arg)
+{
+    uint16_t events;
+    HC_BT_HDR *p_msg, *p_next_msg;
+
+    ALOGI("bt_hc_worker_thread started");
+    prctl(PR_SET_NAME, (unsigned long)"bt_hc_worker", 0, 0, 0);
+    tx_cmd_pkts_pending = FALSE;
+
+    raise_priority_a2dp(TASK_HIGH_HCI_WORKER);
+
+    while (lib_running)
+    {
+        pthread_mutex_lock(&hc_cb.mutex);
+        while (ready_events == 0)
+        {
+            pthread_cond_wait(&hc_cb.cond, &hc_cb.mutex);
+        }
+        events = ready_events;
+        ready_events = 0;
+        pthread_mutex_unlock(&hc_cb.mutex);
+
+#ifndef HCI_USE_MCT
+        if (events & HC_EVENT_RX)
+        {
+            p_hci_if->rcv();
+
+            if ((tx_cmd_pkts_pending == TRUE) && (num_hci_cmd_pkts > 0))
+            {
+                /* Got HCI Cmd Credits from Controller.
+                 * Prepare to send prior pending Cmd packets in the
+                 * following HC_EVENT_TX session.
+                 */
+                events |= HC_EVENT_TX;
+            }
+        }
+#endif
+
+        if (events & HC_EVENT_PRELOAD)
+        {
+            userial_open(USERIAL_PORT_1);
+
+            /* Calling vendor-specific part */
+            if (bt_vnd_if)
+            {
+                bt_vnd_if->op(BT_VND_OP_FW_CFG, NULL);
+            }
+            else
+            {
+                if (bt_hc_cbacks)
+                    bt_hc_cbacks->preload_cb(NULL, BT_HC_PRELOAD_FAIL);
+            }
+        }
+
+        if (events & HC_EVENT_POSTLOAD)
+        {
+            /* Start from SCO related H/W configuration, if SCO configuration
+             * is required. Then, follow with reading requests of getting
+             * ACL data length for both BR/EDR and LE.
+             */
+            int result = -1;
+
+            /* Calling vendor-specific part */
+            if (bt_vnd_if)
+                result = bt_vnd_if->op(BT_VND_OP_SCO_CFG, NULL);
+
+            if (result == -1)
+                p_hci_if->get_acl_max_len();
+        }
+
+        if (events & HC_EVENT_TX)
+        {
+            /*
+             *  We will go through every packets in the tx queue.
+             *  Fine to clear tx_cmd_pkts_pending.
+             */
+            tx_cmd_pkts_pending = FALSE;
+            HC_BT_HDR * sending_msg_que[64];
+            int sending_msg_count = 0;
+            utils_lock();
+            p_next_msg = tx_q.p_first;
+            while (p_next_msg && sending_msg_count <
+                            (int)sizeof(sending_msg_que)/sizeof(sending_msg_que[0]))
+            {
+                if ((p_next_msg->event & MSG_EVT_MASK)==MSG_STACK_TO_HC_HCI_CMD)
+                {
+                    /*
+                     *  if we have used up controller's outstanding HCI command
+                     *  credits (normally is 1), skip all HCI command packets in
+                     *  the queue.
+                     *  The pending command packets will be sent once controller
+                     *  gives back us credits through CommandCompleteEvent or
+                     *  CommandStatusEvent.
+                     */
+                    if ((tx_cmd_pkts_pending == TRUE) || (num_hci_cmd_pkts <= 0))
+                    {
+                        tx_cmd_pkts_pending = TRUE;
+                        p_next_msg = utils_getnext(p_next_msg);
+                        continue;
+                    }
+                }
+
+                p_msg = p_next_msg;
+                p_next_msg = utils_getnext(p_msg);
+                utils_remove_from_queue_unlocked(&tx_q, p_msg);
+                sending_msg_que[sending_msg_count++] = p_msg;
+            }
+            utils_unlock();
+            int i;
+            for(i = 0; i < sending_msg_count; i++)
+                p_hci_if->send(sending_msg_que[i]);
+            if (tx_cmd_pkts_pending == TRUE)
+                BTHCDBG("Used up Tx Cmd credits");
+
+        }
+
+        if (events & HC_EVENT_LPM_ENABLE)
+        {
+            lpm_enable(TRUE);
+        }
+
+        if (events & HC_EVENT_LPM_DISABLE)
+        {
+            lpm_enable(FALSE);
+        }
+
+        if (events & HC_EVENT_LPM_IDLE_TIMEOUT)
+        {
+            lpm_wake_deassert();
+        }
+
+        if (events & HC_EVENT_LPM_ALLOW_SLEEP)
+        {
+            lpm_allow_bt_device_sleep();
+        }
+
+        if (events & HC_EVENT_LPM_WAKE_DEVICE)
+        {
+            lpm_wake_assert();
+        }
+
+        if (events & HC_EVENT_EXIT)
+            break;
+    }
+
+    ALOGI("bt_hc_worker_thread exiting");
+
+    pthread_exit(NULL);
+
+    return NULL;    // compiler friendly
+}
+
+
+/*******************************************************************************
+**
+** Function        bt_hc_get_interface
+**
+** Description     Caller calls this function to get API instance
+**
+** Returns         API table
+**
+*******************************************************************************/
+const bt_hc_interface_t *bt_hc_get_interface(void)
+{
+    return &bluetoothHCLibInterface;
+}
+
diff --git a/hci/src/bt_hw.c b/hci/src/bt_hw.c
new file mode 100644
index 0000000..b2a099f
--- /dev/null
+++ b/hci/src/bt_hw.c
@@ -0,0 +1,207 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      bt_hw.c
+ *
+ *  Description:   Bluedroid libbt-vendor callback functions
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_hw"
+
+#include <dlfcn.h>
+#include <utils/Log.h>
+#include <pthread.h>
+#include "bt_vendor_lib.h"
+#include "bt_hci_bdroid.h"
+#include "hci.h"
+#include "userial.h"
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern tHCI_IF *p_hci_if;
+void lpm_vnd_cback(uint8_t vnd_result);
+
+/******************************************************************************
+**  Variables
+******************************************************************************/
+
+bt_vendor_interface_t *bt_vnd_if=NULL;
+
+/******************************************************************************
+**  Functions
+******************************************************************************/
+
+/******************************************************************************
+**
+** Function         fwcfg_cb
+**
+** Description      HOST/CONTROLLER VENDOR LIB CALLBACK API - This function is
+**                  called when the libbt-vendor completed firmware
+**                  configuration process
+**
+** Returns          None
+**
+******************************************************************************/
+static void fwcfg_cb(bt_vendor_op_result_t result)
+{
+    bt_hc_postload_result_t status = (result == BT_VND_OP_RESULT_SUCCESS) ? \
+                                     BT_HC_PRELOAD_SUCCESS : BT_HC_PRELOAD_FAIL;
+
+    if (bt_hc_cbacks)
+        bt_hc_cbacks->preload_cb(NULL, status);
+}
+
+/******************************************************************************
+**
+** Function         scocfg_cb
+**
+** Description      HOST/CONTROLLER VENDOR LIB CALLBACK API - This function is
+**                  called when the libbt-vendor completed vendor specific SCO
+**                  configuration process
+**
+** Returns          None
+**
+******************************************************************************/
+static void scocfg_cb(bt_vendor_op_result_t result)
+{
+    /* Continue rest of postload process*/
+    p_hci_if->get_acl_max_len();
+}
+
+/******************************************************************************
+**
+** Function         lpm_vnd_cb
+**
+** Description      HOST/CONTROLLER VENDOR LIB CALLBACK API - This function is
+**                  called back from the libbt-vendor to indicate the result of
+**                  previous LPM enable/disable request
+**
+** Returns          None
+**
+******************************************************************************/
+static void lpm_vnd_cb(bt_vendor_op_result_t result)
+{
+    uint8_t status = (result == BT_VND_OP_RESULT_SUCCESS) ? 0 : 1;
+
+    lpm_vnd_cback(status);
+}
+
+/******************************************************************************
+**
+** Function         alloc
+**
+** Description      HOST/CONTROLLER VENDOR LIB CALLOUT API - This function is
+**                  called from the libbt-vendor to request for data buffer
+**                  allocation
+**
+** Returns          NULL / pointer to allocated buffer
+**
+******************************************************************************/
+static void *alloc(int size)
+{
+    HC_BT_HDR *p_hdr = NULL;
+
+    if (bt_hc_cbacks)
+        p_hdr = (HC_BT_HDR *) bt_hc_cbacks->alloc(size);
+
+    return (p_hdr);
+}
+
+/******************************************************************************
+**
+** Function         dealloc
+**
+** Description      HOST/CONTROLLER VENDOR LIB CALLOUT API - This function is
+**                  called from the libbt-vendor to release the data buffer
+**                  allocated through the alloc call earlier
+**
+** Returns          None
+**
+******************************************************************************/
+static void dealloc(void *p_buf)
+{
+    HC_BT_HDR *p_hdr = (HC_BT_HDR *) p_buf;
+
+    if (bt_hc_cbacks)
+        bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_hdr+1));
+}
+
+/******************************************************************************
+**
+** Function         xmit_cb
+**
+** Description      HOST/CONTROLLER VEDNOR LIB CALLOUT API - This function is
+**                  called from the libbt-vendor in order to send a prepared
+**                  HCI command packet through HCI transport TX function.
+**
+** Returns          TRUE/FALSE
+**
+******************************************************************************/
+static uint8_t xmit_cb(uint16_t opcode, void *p_buf, tINT_CMD_CBACK p_cback)
+{
+    return p_hci_if->send_int_cmd(opcode, (HC_BT_HDR *)p_buf, p_cback);
+}
+
+/*****************************************************************************
+**   The libbt-vendor Callback Functions Table
+*****************************************************************************/
+static const bt_vendor_callbacks_t vnd_callbacks = {
+    sizeof(bt_vendor_callbacks_t),
+    fwcfg_cb,
+    scocfg_cb,
+    lpm_vnd_cb,
+    alloc,
+    dealloc,
+    xmit_cb
+};
+
+/******************************************************************************
+**
+** Function         init_vnd_if
+**
+** Description      Initialize vendor lib interface
+**
+** Returns          None
+**
+******************************************************************************/
+void init_vnd_if(unsigned char *local_bdaddr)
+{
+    void *dlhandle;
+
+    dlhandle = dlopen("libbt-vendor.so", RTLD_NOW);
+    if (!dlhandle)
+    {
+        ALOGE("!!! Failed to load libbt-vendor.so !!!");
+        return;
+    }
+
+    bt_vnd_if = (bt_vendor_interface_t *) dlsym(dlhandle, "BLUETOOTH_VENDOR_LIB_INTERFACE");
+    if (!bt_vnd_if)
+    {
+        ALOGE("!!! Failed to get bt vendor interface !!!");
+        return;
+    }
+
+    bt_vnd_if->init(&vnd_callbacks, local_bdaddr);
+}
+
diff --git a/hci/src/btsnoop.c b/hci/src/btsnoop.c
new file mode 100755
index 0000000..4807df8
--- /dev/null
+++ b/hci/src/btsnoop.c
@@ -0,0 +1,694 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/****************************************************************************
+ *
+ *  Name:       btsnoopdisp.c
+ *
+ *  Function:   this file contains functions to generate a BTSNOOP file
+ *
+ *
+ ****************************************************************************/
+#include <stdio.h>
+#include <dlfcn.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <pthread.h>
+#include <sys/prctl.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <fcntl.h>
+
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <netdb.h>
+
+/* for gettimeofday */
+#include <sys/time.h>
+/* for the S_* open parameters */
+#include <sys/stat.h>
+/* for write */
+#include <unistd.h>
+/* for O_* open parameters */
+#include <fcntl.h>
+/* defines the O_* open parameters */
+#include <fcntl.h>
+
+#define LOG_TAG "BTSNOOP-DISP"
+#include <cutils/log.h>
+
+#include "bt_hci_bdroid.h"
+#include "utils.h"
+
+#ifndef BTSNOOP_DBG
+#define BTSNOOP_DBG FALSE
+#endif
+
+#if (BTSNOOP_DBG == TRUE)
+#define SNOOPDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
+#else
+#define SNOOPDBG(param, ...) {}
+#endif
+
+/* file descriptor of the BT snoop file (by default, -1 means disabled) */
+int hci_btsnoop_fd = -1;
+
+/* Macro to perform a multiplication of 2 unsigned 32bit values and store the result
+ * in an unsigned 64 bit value (as two 32 bit variables):
+ * u64 = u32In1 * u32In2
+ * u32OutLow = u64[31:0]
+ * u32OutHi = u64[63:32]
+ * basically the algorithm:
+ * (hi1*2^16 + lo1)*(hi2*2^16 + lo2) = lo1*lo2 + (hi1*hi2)*2^32 + (hi1*lo2 + hi2*lo1)*2^16
+ * and the carry is propagated 16 bit by 16 bit:
+ * result[15:0] = lo1*lo2 & 0xFFFF
+ * result[31:16] = ((lo1*lo2) >> 16) + (hi1*lo2 + hi2*lo1)
+ * and so on
+ */
+#define HCIDISP_MULT_64(u32In1, u32In2, u32OutLo, u32OutHi)                             \
+do {                                                                                    \
+    uint32_t u32In1Tmp = u32In1;                                                          \
+    uint32_t u32In2Tmp = u32In2;                                                          \
+    uint32_t u32Tmp, u32Carry;                                                            \
+    u32OutLo = (u32In1Tmp & 0xFFFF) * (u32In2Tmp & 0xFFFF);              /*lo1*lo2*/    \
+    u32OutHi = ((u32In1Tmp >> 16) & 0xFFFF) * ((u32In2Tmp >> 16) & 0xFFFF); /*hi1*hi2*/ \
+    u32Tmp = (u32In1Tmp & 0xFFFF) * ((u32In2Tmp >> 16) & 0xFFFF);  /*lo1*hi2*/          \
+    u32Carry = (uint32_t)((u32OutLo>>16)&0xFFFF);                                         \
+    u32Carry += (u32Tmp&0xFFFF);                                                        \
+    u32OutLo += (u32Tmp << 16) ;                                                        \
+    u32OutHi += (u32Tmp >> 16);                                                         \
+    u32Tmp = ((u32In1Tmp >> 16) & 0xFFFF) * (u32In2Tmp & 0xFFFF);                       \
+    u32Carry += (u32Tmp)&0xFFFF;                                                        \
+    u32Carry>>=16;                                                                      \
+    u32OutLo += (u32Tmp << 16);                                                         \
+    u32OutHi += (u32Tmp >> 16);                                                         \
+    u32OutHi += u32Carry;                                                               \
+} while (0)
+
+/* Macro to make an addition of 2 64 bit values:
+ * result = (u32OutHi & u32OutLo) + (u32InHi & u32InLo)
+ * u32OutHi = result[63:32]
+ * u32OutLo = result[31:0]
+ */
+#define HCIDISP_ADD_64(u32InLo, u32InHi, u32OutLo, u32OutHi)                            \
+do {                                                                                    \
+    (u32OutLo) += (u32InLo);                                                            \
+    if ((u32OutLo) < (u32InLo)) (u32OutHi)++;                                           \
+    (u32OutHi) += (u32InHi);                                                            \
+} while (0)
+
+/* EPOCH in microseconds since 01/01/0000 : 0x00dcddb3.0f2f8000 */
+#define BTSNOOP_EPOCH_HI 0x00dcddb3U
+#define BTSNOOP_EPOCH_LO 0x0f2f8000U
+
+/*******************************************************************************
+ **
+ ** Function         tv_to_btsnoop_ts
+ **
+ ** Description      This function generate a BT Snoop timestamp.
+ **
+ ** Returns          void
+ **
+ ** NOTE
+ ** The return value is 64 bit as 2 32 bit variables out_lo and * out_hi.
+ ** A BT Snoop timestamp is the number of microseconds since 01/01/0000.
+ ** The timeval structure contains the number of microseconds since EPOCH
+ ** (01/01/1970) encoded as: tv.tv_sec, number of seconds since EPOCH and
+ ** tv_usec, number of microseconds in current second
+ **
+ ** Therefore the algorithm is:
+ **  result = tv.tv_sec * 1000000
+ **  result += tv.tv_usec
+ **  result += EPOCH_OFFSET
+ *******************************************************************************/
+static void tv_to_btsnoop_ts(uint32_t *out_lo, uint32_t *out_hi, struct timeval *tv)
+{
+    /* multiply the seconds by 1000000 */
+    HCIDISP_MULT_64(tv->tv_sec, 0xf4240, *out_lo, *out_hi);
+
+    /* add the microseconds */
+    HCIDISP_ADD_64((uint32_t)tv->tv_usec, 0, *out_lo, *out_hi);
+
+    /* add the epoch */
+    HCIDISP_ADD_64(BTSNOOP_EPOCH_LO, BTSNOOP_EPOCH_HI, *out_lo, *out_hi);
+}
+
+/*******************************************************************************
+ **
+ ** Function         l_to_be
+ **
+ ** Description      Function to convert a 32 bit value into big endian format
+ **
+ ** Returns          32 bit value in big endian format
+*******************************************************************************/
+static uint32_t l_to_be(uint32_t x)
+{
+    #if __BIG_ENDIAN != TRUE
+    x = (x >> 24) |
+        ((x >> 8) & 0xFF00) |
+        ((x << 8) & 0xFF0000) |
+        (x << 24);
+    #endif
+    return x;
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_is_open
+ **
+ ** Description      Function to check if BTSNOOP is open
+ **
+ ** Returns          1 if open otherwise 0
+*******************************************************************************/
+int btsnoop_is_open(void)
+{
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    SNOOPDBG("btsnoop_is_open: snoop fd = %d\n", hci_btsnoop_fd);
+
+    if (hci_btsnoop_fd != -1)
+    {
+        return 1;
+    }
+    return 0;
+#else
+    return 2;  /* Snoop not available  */
+#endif
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_log_open
+ **
+ ** Description      Function to open the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+static int btsnoop_log_open(char *btsnoop_logfile)
+{
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    hci_btsnoop_fd = -1;
+
+    SNOOPDBG("btsnoop_log_open: snoop log file = %s\n", btsnoop_logfile);
+
+    /* write the BT snoop header */
+    if ((btsnoop_logfile != NULL) && (strlen(btsnoop_logfile) != 0))
+    {
+        hci_btsnoop_fd = open(btsnoop_logfile, \
+                              O_WRONLY|O_CREAT|O_TRUNC, \
+                              S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH);
+        if (hci_btsnoop_fd == -1)
+        {
+            perror("open");
+            SNOOPDBG("btsnoop_log_open: Unable to open snoop log file\n");
+            hci_btsnoop_fd = -1;
+            return 0;
+        }
+        write(hci_btsnoop_fd, "btsnoop\0\0\0\0\1\0\0\x3\xea", 16);
+        return 1;
+    }
+#endif
+    return 2;  /* Snoop not available  */
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_log_close
+ **
+ ** Description      Function to close the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+static int btsnoop_log_close(void)
+{
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    /* write the BT snoop header */
+    if (hci_btsnoop_fd != -1)
+    {
+        SNOOPDBG("btsnoop_log_close: Closing snoop log file\n");
+        close(hci_btsnoop_fd);
+        hci_btsnoop_fd = -1;
+        return 1;
+    }
+    return 0;
+#else
+    return 2;  /* Snoop not available  */
+#endif
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_hci_cmd
+ **
+ ** Description      Function to add a command in the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+void btsnoop_hci_cmd(uint8_t *p)
+{
+    SNOOPDBG("btsnoop_hci_cmd: fd = %d", hci_btsnoop_fd);
+
+    if (hci_btsnoop_fd != -1)
+    {
+        uint32_t value, value_hi;
+        struct timeval tv;
+
+        /* since these display functions are called from different contexts */
+        utils_lock();
+
+        /* store the length in both original and included fields */
+        value = l_to_be(p[2] + 4);
+        write(hci_btsnoop_fd, &value, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* flags: command sent from the host */
+        value = l_to_be(2);
+        write(hci_btsnoop_fd, &value, 4);
+        /* drops: none */
+        value = 0;
+        write(hci_btsnoop_fd, &value, 4);
+        /* time */
+        gettimeofday(&tv, NULL);
+        tv_to_btsnoop_ts(&value, &value_hi, &tv);
+        value_hi = l_to_be(value_hi);
+        value = l_to_be(value);
+        write(hci_btsnoop_fd, &value_hi, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* data */
+        write(hci_btsnoop_fd, "\x1", 1);
+        write(hci_btsnoop_fd, p, p[2] + 3);
+
+        /* since these display functions are called from different contexts */
+        utils_unlock();
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_hci_evt
+ **
+ ** Description      Function to add a event in the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+void btsnoop_hci_evt(uint8_t *p)
+{
+    SNOOPDBG("btsnoop_hci_evt: fd = %d", hci_btsnoop_fd);
+
+    if (hci_btsnoop_fd != -1)
+    {
+        uint32_t value, value_hi;
+        struct timeval tv;
+
+        /* since these display functions are called from different contexts */
+        utils_lock();
+
+        /* store the length in both original and included fields */
+        value = l_to_be(p[1] + 3);
+        write(hci_btsnoop_fd, &value, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* flags: event received in the host */
+        value = l_to_be(3);
+        write(hci_btsnoop_fd, &value, 4);
+        /* drops: none */
+        value = 0;
+        write(hci_btsnoop_fd, &value, 4);
+        /* time */
+        gettimeofday(&tv, NULL);
+        tv_to_btsnoop_ts(&value, &value_hi, &tv);
+        value_hi = l_to_be(value_hi);
+        value = l_to_be(value);
+        write(hci_btsnoop_fd, &value_hi, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* data */
+        write(hci_btsnoop_fd, "\x4", 1);
+        write(hci_btsnoop_fd, p, p[1] + 2);
+
+        /* since these display functions are called from different contexts */
+        utils_unlock();
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_sco_data
+ **
+ ** Description      Function to add a SCO data packet in the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+void btsnoop_sco_data(uint8_t *p, uint8_t is_rcvd)
+{
+    SNOOPDBG("btsnoop_sco_data: fd = %d", hci_btsnoop_fd);
+
+    if (hci_btsnoop_fd != -1)
+    {
+        uint32_t value, value_hi;
+        struct timeval tv;
+
+        /* since these display functions are called from different contexts */
+        utils_lock();
+
+        /* store the length in both original and included fields */
+        value = l_to_be(p[2] + 4);
+        write(hci_btsnoop_fd, &value, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* flags: data can be sent or received */
+        value = l_to_be(is_rcvd?1:0);
+        write(hci_btsnoop_fd, &value, 4);
+        /* drops: none */
+        value = 0;
+        write(hci_btsnoop_fd, &value, 4);
+        /* time */
+        gettimeofday(&tv, NULL);
+        tv_to_btsnoop_ts(&value, &value_hi, &tv);
+        value_hi = l_to_be(value_hi);
+        value = l_to_be(value);
+        write(hci_btsnoop_fd, &value_hi, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* data */
+        write(hci_btsnoop_fd, "\x3", 1);
+        write(hci_btsnoop_fd, p, p[2] + 3);
+
+        /* since these display functions are called from different contexts */
+        utils_unlock();
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         btsnoop_acl_data
+ **
+ ** Description      Function to add an ACL data packet in the BTSNOOP file
+ **
+ ** Returns          None
+*******************************************************************************/
+void btsnoop_acl_data(uint8_t *p, uint8_t is_rcvd)
+{
+    SNOOPDBG("btsnoop_acl_data: fd = %d", hci_btsnoop_fd);
+    if (hci_btsnoop_fd != -1)
+    {
+        uint32_t value, value_hi;
+        struct timeval tv;
+
+        /* since these display functions are called from different contexts */
+        utils_lock();
+
+        /* store the length in both original and included fields */
+        value = l_to_be((p[3]<<8) + p[2] + 5);
+        write(hci_btsnoop_fd, &value, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* flags: data can be sent or received */
+        value = l_to_be(is_rcvd?1:0);
+        write(hci_btsnoop_fd, &value, 4);
+        /* drops: none */
+        value = 0;
+        write(hci_btsnoop_fd, &value, 4);
+        /* time */
+        gettimeofday(&tv, NULL);
+        tv_to_btsnoop_ts(&value, &value_hi, &tv);
+        value_hi = l_to_be(value_hi);
+        value = l_to_be(value);
+        write(hci_btsnoop_fd, &value_hi, 4);
+        write(hci_btsnoop_fd, &value, 4);
+        /* data */
+        write(hci_btsnoop_fd, "\x2", 1);
+        write(hci_btsnoop_fd, p, (p[3]<<8) + p[2] + 4);
+
+        /* since these display functions are called from different contexts */
+        utils_unlock();
+    }
+}
+
+
+/********************************************************************************
+ ** API allow external realtime parsing of output using e.g hcidump
+ *********************************************************************************/
+
+#define EXT_PARSER_PORT 4330
+
+static pthread_t thread_id;
+static int s_listen = -1;
+static int ext_parser_fd = -1;
+
+static void ext_parser_detached(void);
+
+static int ext_parser_accept(int port)
+{
+    socklen_t           clilen;
+    struct sockaddr_in  cliaddr, servaddr;
+    int s, srvlen;
+    int n = 1;
+    int size_n;
+    int result = 0;
+
+    ALOGD("waiting for connection on port %d", port);
+
+    s_listen = socket(AF_INET, SOCK_STREAM, 0);
+
+    if (s_listen < 0)
+    {
+        ALOGE("listener not created: listen fd %d", s_listen);
+        return -1;
+    }
+
+    bzero(&servaddr, sizeof(servaddr));
+    servaddr.sin_family      = AF_INET;
+    servaddr.sin_addr.s_addr = htonl(INADDR_ANY);
+    servaddr.sin_port        = htons(port);
+
+    srvlen = sizeof(servaddr);
+
+    /* allow reuse of sock addr upon bind */
+    result = setsockopt(s_listen, SOL_SOCKET, SO_REUSEADDR, &n, sizeof(n));
+
+    if (result<0)
+    {
+        perror("setsockopt");
+    }
+
+    result = bind(s_listen, (struct sockaddr *) &servaddr, srvlen);
+
+    if (result < 0)
+        perror("bind");
+
+    result = listen(s_listen, 1);
+
+    if (result < 0)
+        perror("listen");
+
+    clilen = sizeof(struct sockaddr_in);
+
+    s = accept(s_listen, (struct sockaddr *) &cliaddr, &clilen);
+
+    if (s < 0)
+{
+        perror("accept");
+        return -1;
+    }
+
+    ALOGD("connected (%d)", s);
+
+    return s;
+}
+
+static int send_ext_parser(char *p, int len)
+{
+    int n;
+
+    /* check if io socket is connected */
+    if (ext_parser_fd == -1)
+        return 0;
+
+    SNOOPDBG("write %d to snoop socket\n", len);
+
+    n = write(ext_parser_fd, p, len);
+
+    if (n<=0)
+    {
+        ext_parser_detached();
+    }
+
+    return n;
+}
+
+static void ext_parser_detached(void)
+{
+    ALOGD("ext parser detached");
+
+    if (ext_parser_fd>0)
+        close(ext_parser_fd);
+
+    if (s_listen > 0)
+        close(s_listen);
+
+    ext_parser_fd = -1;
+    s_listen = -1;
+}
+
+static void interruptFn (int sig)
+{
+    ALOGD("interruptFn");
+    pthread_exit(0);
+}
+
+static void ext_parser_thread(void* param)
+{
+    int fd;
+    int sig = SIGUSR2;
+    sigset_t sigSet;
+    sigemptyset (&sigSet);
+    sigaddset (&sigSet, sig);
+
+    ALOGD("ext_parser_thread");
+
+    prctl(PR_SET_NAME, (unsigned long)"BtsnoopExtParser", 0, 0, 0);
+
+    pthread_sigmask (SIG_UNBLOCK, &sigSet, NULL);
+
+    struct sigaction act;
+    act.sa_handler = interruptFn;
+    sigaction (sig, &act, NULL );
+
+    do
+    {
+        fd = ext_parser_accept(EXT_PARSER_PORT);
+
+        ext_parser_fd = fd;
+
+        ALOGD("ext parser attached on fd %d\n", ext_parser_fd);
+    } while (1);
+}
+
+void btsnoop_stop_listener(void)
+{
+    ALOGD("btsnoop_init");
+    ext_parser_detached();
+}
+
+void btsnoop_init(void)
+{
+#if defined(BTSNOOP_EXT_PARSER_INCLUDED) && (BTSNOOP_EXT_PARSER_INCLUDED == TRUE)
+    ALOGD("btsnoop_init");
+
+    /* always setup ext listener port */
+    if (pthread_create(&thread_id, NULL,
+                       (void*)ext_parser_thread,NULL)!=0)
+      perror("pthread_create");
+#endif
+}
+
+void btsnoop_open(char *p_path)
+{
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    ALOGD("btsnoop_open");
+    btsnoop_log_open(p_path);
+#endif // BTSNOOPDISP_INCLUDED
+}
+
+void btsnoop_close(void)
+{
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    ALOGD("btsnoop_close");
+    btsnoop_log_close();
+#endif
+}
+
+void btsnoop_cleanup (void)
+{
+#if defined(BTSNOOP_EXT_PARSER_INCLUDED) && (BTSNOOP_EXT_PARSER_INCLUDED == TRUE)
+    ALOGD("btsnoop_cleanup");
+    pthread_kill(thread_id, SIGUSR2);
+    pthread_join(thread_id, NULL);
+    ext_parser_detached();
+#endif
+}
+
+
+#define HCIT_TYPE_COMMAND   1
+#define HCIT_TYPE_ACL_DATA  2
+#define HCIT_TYPE_SCO_DATA  3
+#define HCIT_TYPE_EVENT     4
+
+void btsnoop_capture(HC_BT_HDR *p_buf, uint8_t is_rcvd)
+{
+    uint8_t *p = (uint8_t *)(p_buf + 1) + p_buf->offset;
+
+    SNOOPDBG("btsnoop_capture: fd = %d, type %x, rcvd %d, ext %d", \
+             hci_btsnoop_fd, p_buf->event, is_rcvd, ext_parser_fd);
+
+#if defined(BTSNOOP_EXT_PARSER_INCLUDED) && (BTSNOOP_EXT_PARSER_INCLUDED == TRUE)
+    if (ext_parser_fd > 0)
+    {
+        uint8_t tmp = *p;
+
+        /* borrow one byte for H4 packet type indicator */
+        p--;
+
+        switch (p_buf->event & MSG_EVT_MASK)
+        {
+              case MSG_HC_TO_STACK_HCI_EVT:
+                  *p = HCIT_TYPE_EVENT;
+                  break;
+              case MSG_HC_TO_STACK_HCI_ACL:
+              case MSG_STACK_TO_HC_HCI_ACL:
+                  *p = HCIT_TYPE_ACL_DATA;
+                  break;
+              case MSG_HC_TO_STACK_HCI_SCO:
+              case MSG_STACK_TO_HC_HCI_SCO:
+                  *p = HCIT_TYPE_SCO_DATA;
+                  break;
+              case MSG_STACK_TO_HC_HCI_CMD:
+                  *p = HCIT_TYPE_COMMAND;
+                  break;
+        }
+
+        send_ext_parser((char*)p, p_buf->len+1);
+        *(++p) = tmp;
+        return;
+    }
+#endif
+
+#if defined(BTSNOOPDISP_INCLUDED) && (BTSNOOPDISP_INCLUDED == TRUE)
+    if (hci_btsnoop_fd == -1)
+        return;
+
+    switch (p_buf->event & MSG_EVT_MASK)
+    {
+        case MSG_HC_TO_STACK_HCI_EVT:
+            SNOOPDBG("TYPE : EVT");
+            btsnoop_hci_evt(p);
+            break;
+        case MSG_HC_TO_STACK_HCI_ACL:
+        case MSG_STACK_TO_HC_HCI_ACL:
+            SNOOPDBG("TYPE : ACL");
+            btsnoop_acl_data(p, is_rcvd);
+            break;
+        case MSG_HC_TO_STACK_HCI_SCO:
+        case MSG_STACK_TO_HC_HCI_SCO:
+            SNOOPDBG("TYPE : SCO");
+            btsnoop_sco_data(p, is_rcvd);
+            break;
+        case MSG_STACK_TO_HC_HCI_CMD:
+            SNOOPDBG("TYPE : CMD");
+            btsnoop_hci_cmd(p);
+            break;
+    }
+#endif // BTSNOOPDISP_INCLUDED
+}
+
+
diff --git a/hci/src/hci_h4.c b/hci/src/hci_h4.c
new file mode 100644
index 0000000..ba15426
--- /dev/null
+++ b/hci/src/hci_h4.c
@@ -0,0 +1,1075 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      hci_h4.c
+ *
+ *  Description:   Contains HCI transport send/receive functions
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_h4"
+
+#include <utils/Log.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include "bt_hci_bdroid.h"
+#include "hci.h"
+#include "userial.h"
+#include "utils.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef HCI_DBG
+#define HCI_DBG FALSE
+#endif
+
+#if (HCI_DBG == TRUE)
+#define HCIDBG(param, ...) {LOGD(param, ## __VA_ARGS__);}
+#else
+#define HCIDBG(param, ...) {}
+#endif
+
+/* Preamble length for HCI Commands:
+**      2-bytes for opcode and 1 byte for length
+*/
+#define HCI_CMD_PREAMBLE_SIZE   3
+
+/* Preamble length for HCI Events:
+**      1-byte for opcode and 1 byte for length
+*/
+#define HCI_EVT_PREAMBLE_SIZE   2
+
+/* Preamble length for SCO Data:
+**      2-byte for Handle and 1 byte for length
+*/
+#define HCI_SCO_PREAMBLE_SIZE   3
+
+/* Preamble length for ACL Data:
+**      2-byte for Handle and 2 byte for length
+*/
+#define HCI_ACL_PREAMBLE_SIZE   4
+
+/* Table of HCI preamble sizes for the different HCI message types */
+static const uint8_t hci_preamble_table[] =
+{
+    HCI_CMD_PREAMBLE_SIZE,
+    HCI_ACL_PREAMBLE_SIZE,
+    HCI_SCO_PREAMBLE_SIZE,
+    HCI_EVT_PREAMBLE_SIZE
+};
+
+/* HCI H4 message type definitions */
+#define H4_TYPE_COMMAND         1
+#define H4_TYPE_ACL_DATA        2
+#define H4_TYPE_SCO_DATA        3
+#define H4_TYPE_EVENT           4
+
+static const uint16_t msg_evt_table[] =
+{
+    MSG_HC_TO_STACK_HCI_ERR,       /* H4_TYPE_COMMAND */
+    MSG_HC_TO_STACK_HCI_ACL,       /* H4_TYPE_ACL_DATA */
+    MSG_HC_TO_STACK_HCI_SCO,       /* H4_TYPE_SCO_DATA */
+    MSG_HC_TO_STACK_HCI_EVT        /* H4_TYPE_EVENT */
+};
+
+#define ACL_RX_PKT_START        2
+#define ACL_RX_PKT_CONTINUE     1
+#define L2CAP_HEADER_SIZE       4
+
+/* Maximum numbers of allowed internal
+** outstanding command packets at any time
+*/
+#define INT_CMD_PKT_MAX_COUNT       8
+#define INT_CMD_PKT_IDX_MASK        0x07
+
+#define HCI_COMMAND_COMPLETE_EVT    0x0E
+#define HCI_COMMAND_STATUS_EVT      0x0F
+#define HCI_READ_BUFFER_SIZE        0x1005
+#define HCI_LE_READ_BUFFER_SIZE     0x2002
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+/* H4 Rx States */
+typedef enum {
+    H4_RX_MSGTYPE_ST,
+    H4_RX_LEN_ST,
+    H4_RX_DATA_ST,
+    H4_RX_IGNORE_ST
+} tHCI_H4_RCV_STATE;
+
+/* Callback function for the returned event of internal issued command */
+typedef void (*tINT_CMD_CBACK)(void *p_mem);
+
+typedef struct
+{
+    uint16_t opcode;        /* OPCODE of outstanding internal commands */
+    tINT_CMD_CBACK cback;   /* Callback function when return of internal
+                             * command is received */
+} tINT_CMD_Q;
+
+/* Control block for HCISU_H4 */
+typedef struct
+{
+    HC_BT_HDR *p_rcv_msg;          /* Buffer to hold current rx HCI message */
+    uint16_t rcv_len;               /* Size of current incoming message */
+    uint8_t rcv_msg_type;           /* Current incoming message type */
+    tHCI_H4_RCV_STATE rcv_state;    /* Receive state of current rx message */
+    uint16_t hc_acl_data_size;      /* Controller's max ACL data length */
+    uint16_t hc_ble_acl_data_size;  /* Controller's max BLE ACL data length */
+    BUFFER_Q acl_rx_q;      /* Queue of base buffers for fragmented ACL pkts */
+    uint8_t preload_count;          /* Count numbers of preload bytes */
+    uint8_t preload_buffer[6];      /* HCI_ACL_PREAMBLE_SIZE + 2 */
+    int int_cmd_rsp_pending;        /* Num of internal cmds pending for ack */
+    uint8_t int_cmd_rd_idx;         /* Read index of int_cmd_opcode queue */
+    uint8_t int_cmd_wrt_idx;        /* Write index of int_cmd_opcode queue */
+    tINT_CMD_Q int_cmd[INT_CMD_PKT_MAX_COUNT]; /* FIFO queue */
+} tHCI_H4_CB;
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern BUFFER_Q tx_q;
+
+void btsnoop_init(void);
+void btsnoop_close(void);
+void btsnoop_cleanup (void);
+void btsnoop_capture(HC_BT_HDR *p_buf, uint8_t is_rcvd);
+uint8_t hci_h4_send_int_cmd(uint16_t opcode, HC_BT_HDR *p_buf, \
+                                  tINT_CMD_CBACK p_cback);
+void lpm_wake_assert(void);
+void lpm_tx_done(uint8_t is_tx_done);
+
+/******************************************************************************
+**  Variables
+******************************************************************************/
+
+/* Num of allowed outstanding HCI CMD packets */
+volatile int num_hci_cmd_pkts = 1;
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static tHCI_H4_CB       h4_cb;
+
+/******************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         get_acl_data_length_cback
+**
+** Description      Callback function for HCI_READ_BUFFER_SIZE and
+**                  HCI_LE_READ_BUFFER_SIZE commands if they were sent because
+**                  of internal request.
+**
+** Returns          None
+**
+*******************************************************************************/
+void get_acl_data_length_cback(void *p_mem)
+{
+    uint8_t     *p, status;
+    uint16_t    opcode, len=0;
+    HC_BT_HDR   *p_buf = (HC_BT_HDR *) p_mem;
+
+    p = (uint8_t *)(p_buf + 1) + 3;
+    STREAM_TO_UINT16(opcode, p)
+    status = *p++;
+    if (status == 0) /* Success */
+        STREAM_TO_UINT16(len, p)
+
+    if (opcode == HCI_READ_BUFFER_SIZE)
+    {
+        if (status == 0)
+            h4_cb.hc_acl_data_size = len;
+
+        /* reuse the rx buffer for sending HCI_LE_READ_BUFFER_SIZE command */
+        p_buf->event = MSG_STACK_TO_HC_HCI_CMD;
+        p_buf->offset = 0;
+        p_buf->layer_specific = 0;
+        p_buf->len = 3;
+
+        p = (uint8_t *) (p_buf + 1);
+        UINT16_TO_STREAM(p, HCI_LE_READ_BUFFER_SIZE);
+        *p = 0;
+
+        if ((status = hci_h4_send_int_cmd(HCI_LE_READ_BUFFER_SIZE, p_buf, \
+                                           get_acl_data_length_cback)) == FALSE)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+            bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_SUCCESS);
+        }
+    }
+    else if (opcode == HCI_LE_READ_BUFFER_SIZE)
+    {
+        if (status == 0)
+            h4_cb.hc_ble_acl_data_size = (len) ? len : h4_cb.hc_acl_data_size;
+
+        if (bt_hc_cbacks)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+            ALOGE("vendor lib postload completed");
+            bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_SUCCESS);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         internal_event_intercept
+**
+** Description      This function is called to parse received HCI event and
+**                  - update the Num_HCI_Command_Packets
+**                  - intercept the event if it is the result of an early
+**                    issued internal command.
+**
+** Returns          TRUE : if the event had been intercepted for internal process
+**                  FALSE : send this event to core stack
+**
+*******************************************************************************/
+uint8_t internal_event_intercept(void)
+{
+    uint8_t     *p;
+    uint8_t     event_code;
+    uint16_t    opcode, len;
+    tHCI_H4_CB  *p_cb = &h4_cb;
+
+    p = (uint8_t *)(p_cb->p_rcv_msg + 1);
+
+    event_code = *p++;
+    len = *p++;
+
+    if (event_code == HCI_COMMAND_COMPLETE_EVT)
+    {
+        num_hci_cmd_pkts = *p++;
+
+        if (p_cb->int_cmd_rsp_pending > 0)
+        {
+            STREAM_TO_UINT16(opcode, p)
+
+            if (opcode == p_cb->int_cmd[p_cb->int_cmd_rd_idx].opcode)
+            {
+                HCIDBG( \
+                "Intercept CommandCompleteEvent for internal command (0x%04X)",\
+                          opcode);
+                if (p_cb->int_cmd[p_cb->int_cmd_rd_idx].cback != NULL)
+                {
+                    p_cb->int_cmd[p_cb->int_cmd_rd_idx].cback(p_cb->p_rcv_msg);
+                }
+                else
+                {
+                    // Missing cback function!
+                    // Release the p_rcv_msg buffer.
+                    if (bt_hc_cbacks)
+                    {
+                        bt_hc_cbacks->dealloc((TRANSAC) p_cb->p_rcv_msg, \
+                                              (char *) (p_cb->p_rcv_msg + 1));
+                    }
+                }
+                p_cb->int_cmd_rd_idx = ((p_cb->int_cmd_rd_idx+1) & \
+                                        INT_CMD_PKT_IDX_MASK);
+                p_cb->int_cmd_rsp_pending--;
+                return TRUE;
+            }
+        }
+    }
+    else if (event_code == HCI_COMMAND_STATUS_EVT)
+    {
+        num_hci_cmd_pkts = *(++p);
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         acl_rx_frame_buffer_alloc
+**
+** Description      This function is called from the HCI transport when the
+**                  first 4 or 6 bytes of an HCI ACL packet have been received:
+**                  - Allocate a new buffer if it is a start pakcet of L2CAP
+**                    message.
+**                  - Return the buffer address of the starting L2CAP message
+**                    frame if the packet is the next segment of a fragmented
+**                    L2CAP message.
+**
+** Returns          the address of the receive buffer H4 RX should use
+**                  (CR419: Modified to return NULL in case of error.)
+**
+** NOTE             This assumes that the L2CAP MTU size is less than the size
+**                  of an HCI ACL buffer, so the maximum L2CAP message will fit
+**                  into one buffer.
+**
+*******************************************************************************/
+static HC_BT_HDR *acl_rx_frame_buffer_alloc (void)
+{
+    uint8_t     *p;
+    uint16_t    handle;
+    uint16_t    hci_len;
+    uint16_t    total_len;
+    uint8_t     pkt_type;
+    HC_BT_HDR  *p_return_buf = NULL;
+    tHCI_H4_CB  *p_cb = &h4_cb;
+
+
+    p = p_cb->preload_buffer;
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (hci_len, p);
+    STREAM_TO_UINT16 (total_len, p);
+
+    pkt_type = (uint8_t)(((handle) >> 12) & 0x0003);
+    handle   = (uint16_t)((handle) & 0x0FFF);
+
+    if (p_cb->acl_rx_q.count)
+    {
+        uint16_t save_handle;
+        HC_BT_HDR *p_hdr = p_cb->acl_rx_q.p_first;
+
+        while (p_hdr != NULL)
+        {
+            p = (uint8_t *)(p_hdr + 1);
+            STREAM_TO_UINT16 (save_handle, p);
+            save_handle   = (uint16_t)((save_handle) & 0x0FFF);
+            if (save_handle == handle)
+            {
+                p_return_buf = p_hdr;
+                break;
+            }
+            p_hdr = utils_getnext(p_hdr);
+        }
+    }
+
+    if (pkt_type == ACL_RX_PKT_START)       /*** START PACKET ***/
+    {
+        /* Might have read 2 bytes for the L2CAP payload length */
+        p_cb->rcv_len = (hci_len) ? (hci_len - 2) : 0;
+
+        /* Start of packet. If we were in the middle of receiving */
+        /* a packet on the same ACL handle, the original packet is incomplete.
+         * Drop it. */
+        if (p_return_buf)
+        {
+            ALOGW("H4 - dropping incomplete ACL frame");
+
+            utils_remove_from_queue(&(p_cb->acl_rx_q), p_return_buf);
+
+            if (bt_hc_cbacks)
+            {
+                bt_hc_cbacks->dealloc((TRANSAC) p_return_buf, \
+                                          (char *) (p_return_buf + 1));
+            }
+            p_return_buf = NULL;
+        }
+
+        /* Allocate a buffer for message */
+        if (bt_hc_cbacks)
+        {
+            int len = total_len + HCI_ACL_PREAMBLE_SIZE + L2CAP_HEADER_SIZE + \
+                      BT_HC_HDR_SIZE;
+            p_return_buf = (HC_BT_HDR *) bt_hc_cbacks->alloc(len);
+        }
+
+        if (p_return_buf)
+        {
+            /* Initialize buffer with preloaded data */
+            p_return_buf->offset = 0;
+            p_return_buf->layer_specific = 0;
+            p_return_buf->event = MSG_HC_TO_STACK_HCI_ACL;
+            p_return_buf->len = p_cb->preload_count;
+            memcpy((uint8_t *)(p_return_buf + 1), p_cb->preload_buffer, \
+                   p_cb->preload_count);
+
+            if (hci_len && ((total_len + L2CAP_HEADER_SIZE) > hci_len))
+            {
+                /* Will expect to see fragmented ACL packets */
+                /* Keep the base buffer address in the watching queue */
+                utils_enqueue(&(p_cb->acl_rx_q), p_return_buf);
+            }
+        }
+    }
+    else                                    /*** CONTINUATION PACKET ***/
+    {
+        p_cb->rcv_len = hci_len;
+
+        if (p_return_buf)
+        {
+            /* Packet continuation and found the original rx buffer */
+            uint8_t *p_f = p = (uint8_t *)(p_return_buf + 1) + 2;
+
+            STREAM_TO_UINT16 (total_len, p);
+
+            /* Update HCI header of first segment (base buffer) with new len */
+            total_len += hci_len;
+            UINT16_TO_STREAM (p_f, total_len);
+        }
+    }
+
+    return (p_return_buf);
+}
+
+/*******************************************************************************
+**
+** Function         acl_rx_frame_end_chk
+**
+** Description      This function is called from the HCI transport when the last
+**                  byte of an HCI ACL packet has been received. It checks if
+**                  the L2CAP message is complete, i.e. no more continuation
+**                  packets are expected.
+**
+** Returns          TRUE if message complete, FALSE if continuation expected
+**
+*******************************************************************************/
+static uint8_t acl_rx_frame_end_chk (void)
+{
+    uint8_t     *p;
+    uint16_t    handle, hci_len, l2cap_len;
+    HC_BT_HDR  *p_buf;
+    tHCI_H4_CB  *p_cb = &h4_cb;
+    uint8_t     frame_end=TRUE;
+
+    p_buf = p_cb->p_rcv_msg;
+    p = (uint8_t *)(p_buf + 1);
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (hci_len, p);
+    STREAM_TO_UINT16 (l2cap_len, p);
+
+    if (hci_len > 0)
+    {
+        if (l2cap_len > (p_buf->len-(HCI_ACL_PREAMBLE_SIZE+L2CAP_HEADER_SIZE)) )
+        {
+            /* If the L2CAP length has not been reached, tell H4 not to send
+             * this buffer to stack */
+            frame_end = FALSE;
+        }
+        else
+        {
+            /*
+             * The current buffer coulb be in the watching list.
+             * Remove it from the list if it is in.
+             */
+            if (p_cb->acl_rx_q.count)
+                utils_remove_from_queue(&(p_cb->acl_rx_q), p_buf);
+        }
+    }
+
+    /****
+     ** Print snoop trace
+     ****/
+    if (p_buf->offset)
+    {
+        /* CONTINUATION PACKET */
+
+        /* save original p_buf->len content */
+        uint16_t tmp_u16 = p_buf->len;
+
+        /* borrow HCI_ACL_PREAMBLE_SIZE bytes from the payload section */
+        p = (uint8_t *)(p_buf + 1) + p_buf->offset - HCI_ACL_PREAMBLE_SIZE;
+
+        /* save contents */
+        memcpy(p_cb->preload_buffer, p, HCI_ACL_PREAMBLE_SIZE);
+
+        /* Set packet boundary flags to "continuation packet" */
+        handle = (handle & 0xCFFF) | 0x1000;
+
+        /* write handl & length info */
+        UINT16_TO_STREAM (p, handle);
+        UINT16_TO_STREAM (p, (p_buf->len - p_buf->offset));
+
+        /* roll pointer back */
+        p = p - HCI_ACL_PREAMBLE_SIZE;
+
+        /* adjust `p_buf->offset` & `p_buf->len`
+         * before calling btsnoop_capture() */
+        p_buf->offset = p_buf->offset - HCI_ACL_PREAMBLE_SIZE;
+        p_buf->len = p_buf->len - p_buf->offset;
+
+        btsnoop_capture(p_buf, TRUE);
+
+        /* restore contents */
+        memcpy(p, p_cb->preload_buffer, HCI_ACL_PREAMBLE_SIZE);
+
+        /* restore p_buf->len */
+        p_buf->len = tmp_u16;
+    }
+    else
+    {
+        /* START PACKET */
+        btsnoop_capture(p_buf, TRUE);
+    }
+
+    if (frame_end == TRUE)
+        p_buf->offset = 0;
+    else
+        p_buf->offset = p_buf->len; /* save current buffer-end position */
+
+    return frame_end;
+}
+
+/*****************************************************************************
+**   HCI H4 INTERFACE FUNCTIONS
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        hci_h4_init
+**
+** Description     Initialize H4 module
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_h4_init(void)
+{
+    HCIDBG("hci_h4_init");
+
+    memset(&h4_cb, 0, sizeof(tHCI_H4_CB));
+    utils_queue_init(&(h4_cb.acl_rx_q));
+
+    /* Per HCI spec., always starts with 1 */
+    num_hci_cmd_pkts = 1;
+
+    /* Give an initial values of Host Controller's ACL data packet length
+     * Will update with an internal HCI(_LE)_Read_Buffer_Size request
+     */
+    h4_cb.hc_acl_data_size = 1021;
+    h4_cb.hc_ble_acl_data_size = 27;
+
+    btsnoop_init();
+}
+
+/*******************************************************************************
+**
+** Function        hci_h4_cleanup
+**
+** Description     Clean H4 module
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_h4_cleanup(void)
+{
+    HCIDBG("hci_h4_cleanup");
+
+    btsnoop_close();
+    btsnoop_cleanup();
+}
+
+/*******************************************************************************
+**
+** Function        hci_h4_send_msg
+**
+** Description     Determine message type, set HCI H4 packet indicator, and
+**                 send message through USERIAL driver
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_h4_send_msg(HC_BT_HDR *p_msg)
+{
+    uint8_t type = 0;
+    uint16_t handle;
+    uint16_t bytes_to_send, lay_spec;
+    uint8_t *p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+    uint16_t event = p_msg->event & MSG_EVT_MASK;
+    uint16_t sub_event = p_msg->event & MSG_SUB_EVT_MASK;
+    uint16_t acl_pkt_size = 0, acl_data_size = 0;
+    uint16_t bytes_sent;
+
+    /* wake up BT device if its in sleep mode */
+    lpm_wake_assert();
+
+    if (event == MSG_STACK_TO_HC_HCI_ACL)
+        type = H4_TYPE_ACL_DATA;
+    else if (event == MSG_STACK_TO_HC_HCI_SCO)
+        type = H4_TYPE_SCO_DATA;
+    else if (event == MSG_STACK_TO_HC_HCI_CMD)
+        type = H4_TYPE_COMMAND;
+
+    if (sub_event == LOCAL_BR_EDR_CONTROLLER_ID)
+    {
+        acl_data_size = h4_cb.hc_acl_data_size;
+        acl_pkt_size = h4_cb.hc_acl_data_size + HCI_ACL_PREAMBLE_SIZE;
+    }
+    else
+    {
+        acl_data_size = h4_cb.hc_ble_acl_data_size;
+        acl_pkt_size = h4_cb.hc_ble_acl_data_size + HCI_ACL_PREAMBLE_SIZE;
+    }
+
+    /* Check if sending ACL data that needs fragmenting */
+    if ((event == MSG_STACK_TO_HC_HCI_ACL) && (p_msg->len > acl_pkt_size))
+    {
+        /* Get the handle from the packet */
+        STREAM_TO_UINT16 (handle, p);
+
+        /* Set packet boundary flags to "continuation packet" */
+        handle = (handle & 0xCFFF) | 0x1000;
+
+        /* Do all the first chunks */
+        while (p_msg->len > acl_pkt_size)
+        {
+            /* remember layer_specific because uart borrow
+               one byte from layer_specific for packet type */
+            lay_spec = p_msg->layer_specific;
+
+            p = ((uint8_t *)(p_msg + 1)) + p_msg->offset - 1;
+            *p = type;
+            bytes_to_send = acl_pkt_size + 1; /* packet_size + message type */
+
+            bytes_sent = userial_write(event,(uint8_t *) p,bytes_to_send);
+
+            /* generate snoop trace message */
+            btsnoop_capture(p_msg, FALSE);
+
+            p_msg->layer_specific = lay_spec;
+            /* Adjust offset and length for what we just sent */
+            p_msg->offset += acl_data_size;
+            p_msg->len    -= acl_data_size;
+
+            p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+
+            UINT16_TO_STREAM (p, handle);
+
+            if (p_msg->len > acl_pkt_size)
+            {
+                UINT16_TO_STREAM (p, acl_data_size);
+            }
+            else
+            {
+                UINT16_TO_STREAM (p, p_msg->len - HCI_ACL_PREAMBLE_SIZE);
+            }
+
+            /* If we were only to send partial buffer, stop when done.    */
+            /* Send the buffer back to L2CAP to send the rest of it later */
+            if (p_msg->layer_specific)
+            {
+                if (--p_msg->layer_specific == 0)
+                {
+                    p_msg->event = MSG_HC_TO_STACK_L2C_SEG_XMIT;
+
+                    if (bt_hc_cbacks)
+                    {
+                        bt_hc_cbacks->tx_result((TRANSAC) p_msg, \
+                                                    (char *) (p_msg + 1), \
+                                                    BT_HC_TX_FRAGMENT);
+                    }
+
+                    return;
+                }
+            }
+        }
+    }
+
+
+    /* remember layer_specific because uart borrow
+       one byte from layer_specific for packet type */
+    lay_spec = p_msg->layer_specific;
+
+    /* Put the HCI Transport packet type 1 byte before the message */
+    p = ((uint8_t *)(p_msg + 1)) + p_msg->offset - 1;
+    *p = type;
+    bytes_to_send = p_msg->len + 1;     /* message_size + message type */
+
+    bytes_sent = userial_write(event,(uint8_t *) p, bytes_to_send);
+
+    p_msg->layer_specific = lay_spec;
+
+    if (event == MSG_STACK_TO_HC_HCI_CMD)
+    {
+        num_hci_cmd_pkts--;
+
+        /* If this is an internal Cmd packet, the layer_specific field would
+         * have stored with the opcode of HCI command.
+         * Retrieve the opcode from the Cmd packet.
+         */
+         p++;
+        STREAM_TO_UINT16(lay_spec, p);
+    }
+
+    /* generate snoop trace message */
+    btsnoop_capture(p_msg, FALSE);
+
+    if (bt_hc_cbacks)
+    {
+        if ((event == MSG_STACK_TO_HC_HCI_CMD) && \
+            (h4_cb.int_cmd_rsp_pending > 0) && \
+            (p_msg->layer_specific == lay_spec))
+        {
+            /* dealloc buffer of internal command */
+            bt_hc_cbacks->dealloc((TRANSAC) p_msg, (char *) (p_msg + 1));
+        }
+        else
+        {
+            bt_hc_cbacks->tx_result((TRANSAC) p_msg, (char *) (p_msg + 1), \
+                                        BT_HC_TX_SUCCESS);
+        }
+    }
+
+    lpm_tx_done(TRUE);
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_h4_receive_msg
+**
+** Description     Construct HCI EVENT/ACL packets and send them to stack once
+**                 complete packet has been received.
+**
+** Returns         Number of read bytes
+**
+*******************************************************************************/
+uint16_t hci_h4_receive_msg(void)
+{
+    uint16_t    bytes_read = 0;
+    uint8_t     byte;
+    uint16_t    msg_len, len;
+    uint8_t     msg_received;
+    tHCI_H4_CB  *p_cb=&h4_cb;
+
+    while (TRUE)
+    {
+        /* Read one byte to see if there is anything waiting to be read */
+        if (userial_read(0 /*dummy*/, &byte, 1) == 0)
+        {
+            break;
+        }
+
+        bytes_read++;
+        msg_received = FALSE;
+
+        switch (p_cb->rcv_state)
+        {
+        case H4_RX_MSGTYPE_ST:
+            /* Start of new message */
+            if ((byte < H4_TYPE_ACL_DATA) || (byte > H4_TYPE_EVENT))
+            {
+                /* Unknown HCI message type */
+                /* Drop this byte */
+                ALOGE("[h4] Unknown HCI message type drop this byte 0x%x", byte);
+                break;
+            }
+
+            /* Initialize rx parameters */
+            p_cb->rcv_msg_type = byte;
+            p_cb->rcv_len = hci_preamble_table[byte-1];
+            memset(p_cb->preload_buffer, 0 , 6);
+            p_cb->preload_count = 0;
+            // p_cb->p_rcv_msg = NULL;
+            p_cb->rcv_state = H4_RX_LEN_ST; /* Next, wait for length to come */
+            break;
+
+        case H4_RX_LEN_ST:
+            /* Receiving preamble */
+            p_cb->preload_buffer[p_cb->preload_count++] = byte;
+            p_cb->rcv_len--;
+
+            /* Check if we received entire preamble yet */
+            if (p_cb->rcv_len == 0)
+            {
+                if (p_cb->rcv_msg_type == H4_TYPE_ACL_DATA)
+                {
+                    /* ACL data lengths are 16-bits */
+                    msg_len = p_cb->preload_buffer[3];
+                    msg_len = (msg_len << 8) + p_cb->preload_buffer[2];
+
+                    if (msg_len && (p_cb->preload_count == 4))
+                    {
+                        /* Check if this is a start packet */
+                        byte = ((p_cb->preload_buffer[1] >> 4) & 0x03);
+
+                        if (byte == ACL_RX_PKT_START)
+                        {
+                           /*
+                            * A start packet & with non-zero data payload length.
+                            * We want to read 2 more bytes to get L2CAP payload
+                            * length.
+                            */
+                            p_cb->rcv_len = 2;
+
+                            break;
+                        }
+                    }
+
+                    /*
+                     * Check for segmented packets. If this is a continuation
+                     * packet, then we will continue appending data to the
+                     * original rcv buffer.
+                     */
+                    p_cb->p_rcv_msg = acl_rx_frame_buffer_alloc();
+                }
+                else
+                {
+                    /* Received entire preamble.
+                     * Length is in the last received byte */
+                    msg_len = byte;
+                    p_cb->rcv_len = msg_len;
+
+                    /* Allocate a buffer for message */
+                    if (bt_hc_cbacks)
+                    {
+                        len = msg_len + p_cb->preload_count + BT_HC_HDR_SIZE;
+                        p_cb->p_rcv_msg = \
+                            (HC_BT_HDR *) bt_hc_cbacks->alloc(len);
+                    }
+
+                    if (p_cb->p_rcv_msg)
+                    {
+                        /* Initialize buffer with preloaded data */
+                        p_cb->p_rcv_msg->offset = 0;
+                        p_cb->p_rcv_msg->layer_specific = 0;
+                        p_cb->p_rcv_msg->event = \
+                            msg_evt_table[p_cb->rcv_msg_type-1];
+                        p_cb->p_rcv_msg->len = p_cb->preload_count;
+                        memcpy((uint8_t *)(p_cb->p_rcv_msg + 1), \
+                               p_cb->preload_buffer, p_cb->preload_count);
+                    }
+                }
+
+                if (p_cb->p_rcv_msg == NULL)
+                {
+                    /* Unable to acquire message buffer. */
+                    ALOGE( \
+                     "H4: Unable to acquire buffer for incoming HCI message." \
+                    );
+
+                    if (msg_len == 0)
+                    {
+                        /* Wait for next message */
+                        p_cb->rcv_state = H4_RX_MSGTYPE_ST;
+                    }
+                    else
+                    {
+                        /* Ignore rest of the packet */
+                        p_cb->rcv_state = H4_RX_IGNORE_ST;
+                    }
+
+                    break;
+                }
+
+                /* Message length is valid */
+                if (msg_len)
+                {
+                    /* Read rest of message */
+                    p_cb->rcv_state = H4_RX_DATA_ST;
+                }
+                else
+                {
+                    /* Message has no additional parameters.
+                     * (Entire message has been received) */
+                    if (p_cb->rcv_msg_type == H4_TYPE_ACL_DATA)
+                        acl_rx_frame_end_chk(); /* to print snoop trace */
+
+                    msg_received = TRUE;
+
+                    /* Next, wait for next message */
+                    p_cb->rcv_state = H4_RX_MSGTYPE_ST;
+                }
+            }
+            break;
+
+        case H4_RX_DATA_ST:
+            *((uint8_t *)(p_cb->p_rcv_msg + 1) + p_cb->p_rcv_msg->len++) = byte;
+            p_cb->rcv_len--;
+
+            if (p_cb->rcv_len > 0)
+            {
+                /* Read in the rest of the message */
+                len = userial_read(0 /*dummy*/, \
+                      ((uint8_t *)(p_cb->p_rcv_msg+1) + p_cb->p_rcv_msg->len), \
+                      p_cb->rcv_len);
+                p_cb->p_rcv_msg->len += len;
+                p_cb->rcv_len -= len;
+                bytes_read += len;
+            }
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Received entire packet. */
+                /* Check for segmented l2cap packets */
+                if ((p_cb->rcv_msg_type == H4_TYPE_ACL_DATA) &&
+                    !acl_rx_frame_end_chk())
+                {
+                    /* Not the end of packet yet. */
+                    /* Next, wait for next message */
+                    p_cb->rcv_state = H4_RX_MSGTYPE_ST;
+                }
+                else
+                {
+                    msg_received = TRUE;
+                    /* Next, wait for next message */
+                    p_cb->rcv_state = H4_RX_MSGTYPE_ST;
+                }
+            }
+            break;
+
+
+        case H4_RX_IGNORE_ST:
+            /* Ignore reset of packet */
+            p_cb->rcv_len--;
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Next, wait for next message */
+                p_cb->rcv_state = H4_RX_MSGTYPE_ST;
+            }
+            break;
+        }
+
+
+        /* If we received entire message, then send it to the task */
+        if (msg_received)
+        {
+            uint8_t intercepted = FALSE;
+
+            /* generate snoop trace message */
+            /* ACL packet tracing had done in acl_rx_frame_end_chk() */
+            if (p_cb->p_rcv_msg->event != MSG_HC_TO_STACK_HCI_ACL)
+                btsnoop_capture(p_cb->p_rcv_msg, TRUE);
+
+            if (p_cb->p_rcv_msg->event == MSG_HC_TO_STACK_HCI_EVT)
+                intercepted = internal_event_intercept();
+
+            if ((bt_hc_cbacks) && (intercepted == FALSE))
+            {
+                bt_hc_cbacks->data_ind((TRANSAC) p_cb->p_rcv_msg, \
+                                       (char *) (p_cb->p_rcv_msg + 1), \
+                                       p_cb->p_rcv_msg->len + BT_HC_HDR_SIZE);
+            }
+            p_cb->p_rcv_msg = NULL;
+        }
+    }
+
+    return (bytes_read);
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_h4_send_int_cmd
+**
+** Description     Place the internal commands (issued internally by vendor lib)
+**                 in the tx_q.
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t hci_h4_send_int_cmd(uint16_t opcode, HC_BT_HDR *p_buf, \
+                                  tINT_CMD_CBACK p_cback)
+{
+    if (h4_cb.int_cmd_rsp_pending > INT_CMD_PKT_MAX_COUNT)
+    {
+        ALOGE( \
+        "Allow only %d outstanding internal commands at a time [Reject 0x%04X]"\
+        , INT_CMD_PKT_MAX_COUNT, opcode);
+        return FALSE;
+    }
+
+    h4_cb.int_cmd_rsp_pending++;
+    h4_cb.int_cmd[h4_cb.int_cmd_wrt_idx].opcode = opcode;
+    h4_cb.int_cmd[h4_cb.int_cmd_wrt_idx].cback = p_cback;
+    h4_cb.int_cmd_wrt_idx = ((h4_cb.int_cmd_wrt_idx+1) & INT_CMD_PKT_IDX_MASK);
+
+    /* stamp signature to indicate an internal command */
+    p_buf->layer_specific = opcode;
+
+    utils_enqueue(&tx_q, (void *) p_buf);
+    bthc_signal_event(HC_EVENT_TX);
+
+    return TRUE;
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_h4_get_acl_data_length
+**
+** Description     Issue HCI_READ_BUFFER_SIZE command to retrieve Controller's
+**                 ACL data length setting
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_h4_get_acl_data_length(void)
+{
+    HC_BT_HDR  *p_buf = NULL;
+    uint8_t     *p, ret;
+
+    if (bt_hc_cbacks)
+    {
+        p_buf = (HC_BT_HDR *) bt_hc_cbacks->alloc(BT_HC_HDR_SIZE + \
+                                                       HCI_CMD_PREAMBLE_SIZE);
+    }
+
+    if (p_buf)
+    {
+        p_buf->event = MSG_STACK_TO_HC_HCI_CMD;
+        p_buf->offset = 0;
+        p_buf->layer_specific = 0;
+        p_buf->len = HCI_CMD_PREAMBLE_SIZE;
+
+        p = (uint8_t *) (p_buf + 1);
+        UINT16_TO_STREAM(p, HCI_READ_BUFFER_SIZE);
+        *p = 0;
+
+        if ((ret = hci_h4_send_int_cmd(HCI_READ_BUFFER_SIZE, p_buf, \
+                                       get_acl_data_length_cback)) == FALSE)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+        }
+        else
+            return;
+    }
+
+    if (bt_hc_cbacks)
+    {
+        ALOGE("vendor lib postload aborted");
+        bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_FAIL);
+    }
+}
+
+
+/******************************************************************************
+**  HCI H4 Services interface table
+******************************************************************************/
+
+const tHCI_IF hci_h4_func_table =
+{
+    hci_h4_init,
+    hci_h4_cleanup,
+    hci_h4_send_msg,
+    hci_h4_send_int_cmd,
+    hci_h4_get_acl_data_length,
+    hci_h4_receive_msg
+};
+
diff --git a/hci/src/hci_mct.c b/hci/src/hci_mct.c
new file mode 100755
index 0000000..4e70063
--- /dev/null
+++ b/hci/src/hci_mct.c
@@ -0,0 +1,1179 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      hci_mct.c
+ *
+ *  Description:   Contains HCI transport send/receive functions
+ *                 for Multi-Channels Transport
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_mct"
+
+#include <utils/Log.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include "bt_hci_bdroid.h"
+#include "hci.h"
+#include "userial.h"
+#include "utils.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef HCI_DBG
+#define HCI_DBG FALSE
+#endif
+
+#if (HCI_DBG == TRUE)
+#define HCIDBG(param, ...) {LOGD(param, ## __VA_ARGS__);}
+#else
+#define HCIDBG(param, ...) {}
+#endif
+
+/* Preamble length for HCI Commands:
+**      2-bytes for opcode and 1 byte for length
+*/
+#define HCI_CMD_PREAMBLE_SIZE   3
+
+/* Preamble length for HCI Events:
+**      1-byte for opcode and 1 byte for length
+*/
+#define HCI_EVT_PREAMBLE_SIZE   2
+
+/* Preamble length for SCO Data:
+**      2-byte for Handle and 1 byte for length
+*/
+#define HCI_SCO_PREAMBLE_SIZE   3
+
+/* Preamble length for ACL Data:
+**      2-byte for Handle and 2 byte for length
+*/
+#define HCI_ACL_PREAMBLE_SIZE   4
+
+#define ACL_RX_PKT_START        2
+#define ACL_RX_PKT_CONTINUE     1
+#define L2CAP_HEADER_SIZE       4
+
+/* Maximum numbers of allowed internal
+** outstanding command packets at any time
+*/
+#define INT_CMD_PKT_MAX_COUNT       8
+#define INT_CMD_PKT_IDX_MASK        0x07
+
+#define HCI_COMMAND_COMPLETE_EVT    0x0E
+#define HCI_COMMAND_STATUS_EVT      0x0F
+#define HCI_READ_BUFFER_SIZE        0x1005
+#define HCI_LE_READ_BUFFER_SIZE     0x2002
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+/* MCT Rx States */
+typedef enum {
+    MCT_RX_NEWMSG_ST,
+    MCT_RX_LEN_ST,
+    MCT_RX_DATA_ST,
+    MCT_RX_IGNORE_ST
+} tHCI_MCT_RCV_STATE;
+
+/* Callback function for the returned event of internal issued command */
+typedef void (*tINT_CMD_CBACK)(void *p_mem);
+
+typedef struct
+{
+    uint16_t opcode;        /* OPCODE of outstanding internal commands */
+    tINT_CMD_CBACK cback;   /* Callback function when return of internal
+                             * command is received */
+} tINT_CMD_Q;
+
+typedef struct
+{
+    HC_BT_HDR *p_rcv_msg;          /* Buffer to hold current rx HCI message */
+    uint16_t rcv_len;               /* Size of current incoming message */
+    tHCI_MCT_RCV_STATE rcv_state;   /* Receive state of current rx message */
+    uint8_t preload_count;          /* Count numbers of preload bytes */
+    uint8_t preload_buffer[6];      /* HCI_ACL_PREAMBLE_SIZE + 2 */
+} tHCI_RCV_CB;
+
+/* Control block for HCISU_MCT */
+typedef struct
+{
+    tHCI_RCV_CB rcv_evt;
+    tHCI_RCV_CB rcv_acl;
+    uint16_t hc_acl_data_size;      /* Controller's max ACL data length */
+    uint16_t hc_ble_acl_data_size;  /* Controller's max BLE ACL data length */
+    BUFFER_Q acl_rx_q;      /* Queue of base buffers for fragmented ACL pkts */
+    int int_cmd_rsp_pending;        /* Num of internal cmds pending for ack */
+    uint8_t int_cmd_rd_idx;         /* Read index of int_cmd_opcode queue */
+    uint8_t int_cmd_wrt_idx;        /* Write index of int_cmd_opcode queue */
+    tINT_CMD_Q int_cmd[INT_CMD_PKT_MAX_COUNT]; /* FIFO queue */
+} tHCI_MCT_CB;
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern BUFFER_Q tx_q;
+
+void btsnoop_init(void);
+void btsnoop_close(void);
+void btsnoop_cleanup (void);
+void btsnoop_capture(HC_BT_HDR *p_buf, uint8_t is_rcvd);
+uint8_t hci_mct_send_int_cmd(uint16_t opcode, HC_BT_HDR *p_buf, \
+                                  tINT_CMD_CBACK p_cback);
+void lpm_wake_assert(void);
+void lpm_tx_done(uint8_t is_tx_done);
+
+/******************************************************************************
+**  Variables
+******************************************************************************/
+
+/* Num of allowed outstanding HCI CMD packets */
+volatile int num_hci_cmd_pkts = 1;
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static tHCI_MCT_CB       mct_cb;
+
+/******************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         get_acl_data_length_cback
+**
+** Description      Callback function for HCI_READ_BUFFER_SIZE and
+**                  HCI_LE_READ_BUFFER_SIZE commands if they were sent because
+**                  of internal request.
+**
+** Returns          None
+**
+*******************************************************************************/
+void get_acl_data_length_cback(void *p_mem)
+{
+    uint8_t     *p, status;
+    uint16_t    opcode, len=0;
+    HC_BT_HDR   *p_buf = (HC_BT_HDR *) p_mem;
+
+    p = (uint8_t *)(p_buf + 1) + 3;
+    STREAM_TO_UINT16(opcode, p)
+    status = *p++;
+    if (status == 0) /* Success */
+        STREAM_TO_UINT16(len, p)
+
+    if (opcode == HCI_READ_BUFFER_SIZE)
+    {
+        if (status == 0)
+            mct_cb.hc_acl_data_size = len;
+
+        /* reuse the rx buffer for sending HCI_LE_READ_BUFFER_SIZE command */
+        p_buf->event = MSG_STACK_TO_HC_HCI_CMD;
+        p_buf->offset = 0;
+        p_buf->layer_specific = 0;
+        p_buf->len = 3;
+
+        p = (uint8_t *) (p_buf + 1);
+        UINT16_TO_STREAM(p, HCI_LE_READ_BUFFER_SIZE);
+        *p = 0;
+
+        if ((status = hci_mct_send_int_cmd(HCI_LE_READ_BUFFER_SIZE, p_buf, \
+                                           get_acl_data_length_cback)) == FALSE)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+            bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_SUCCESS);
+        }
+    }
+    else if (opcode == HCI_LE_READ_BUFFER_SIZE)
+    {
+        if (status == 0)
+            mct_cb.hc_ble_acl_data_size = (len) ? len : mct_cb.hc_acl_data_size;
+
+        if (bt_hc_cbacks)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+            ALOGE("hci lib postload completed");
+            bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_SUCCESS);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         internal_event_intercept
+**
+** Description      This function is called to parse received HCI event and
+**                  - update the Num_HCI_Command_Packets
+**                  - intercept the event if it is the result of an early
+**                    issued internal command.
+**
+** Returns          TRUE : if the event had been intercepted for internal process
+**                  FALSE : send this event to core stack
+**
+*******************************************************************************/
+uint8_t internal_event_intercept(void)
+{
+    uint8_t     *p;
+    uint8_t     event_code;
+    uint16_t    opcode, len;
+    tHCI_MCT_CB *p_cb = &mct_cb;
+
+    p = (uint8_t *)(p_cb->rcv_evt.p_rcv_msg + 1);
+
+    event_code = *p++;
+    len = *p++;
+
+    if (event_code == HCI_COMMAND_COMPLETE_EVT)
+    {
+        utils_lock();
+        num_hci_cmd_pkts = *p++;
+        utils_unlock();
+
+        // Signal TX event so the worker thread can check if it has anything
+        // to send
+        bthc_signal_event(HC_EVENT_TX);
+
+        if (p_cb->int_cmd_rsp_pending > 0)
+        {
+            STREAM_TO_UINT16(opcode, p)
+
+            if (opcode == p_cb->int_cmd[p_cb->int_cmd_rd_idx].opcode)
+            {
+                HCIDBG( \
+                "Intercept CommandCompleteEvent for internal command (0x%04X)",\
+                          opcode);
+                if (p_cb->int_cmd[p_cb->int_cmd_rd_idx].cback != NULL)
+                {
+                    p_cb->int_cmd[p_cb->int_cmd_rd_idx].cback(p_cb->rcv_evt.p_rcv_msg);
+                }
+                else
+                {
+                    // Missing cback function!
+                    // Release the p_rcv_msg buffer.
+                    if (bt_hc_cbacks)
+                    {
+                        bt_hc_cbacks->dealloc((TRANSAC) p_cb->rcv_evt.p_rcv_msg, \
+                                              (char *) (p_cb->rcv_evt.p_rcv_msg + 1));
+                    }
+                }
+                p_cb->int_cmd_rd_idx = ((p_cb->int_cmd_rd_idx+1) & \
+                                        INT_CMD_PKT_IDX_MASK);
+                p_cb->int_cmd_rsp_pending--;
+                return TRUE;
+            }
+        }
+    }
+    else if (event_code == HCI_COMMAND_STATUS_EVT)
+    {
+        utils_lock();
+        num_hci_cmd_pkts = *(++p);
+        utils_unlock();
+
+        // Signal TX event so the worker thread can check if it has anything
+        // to send
+        bthc_signal_event(HC_EVENT_TX);
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         acl_rx_frame_buffer_alloc
+**
+** Description      This function is called from the HCI transport when the
+**                  first 4 or 6 bytes of an HCI ACL packet have been received:
+**                  - Allocate a new buffer if it is a start pakcet of L2CAP
+**                    message.
+**                  - Return the buffer address of the starting L2CAP message
+**                    frame if the packet is the next segment of a fragmented
+**                    L2CAP message.
+**
+** Returns          the address of the receive buffer caller should use
+**                  (CR419: Modified to return NULL in case of error.)
+**
+** NOTE             This assumes that the L2CAP MTU size is less than the size
+**                  of an HCI ACL buffer, so the maximum L2CAP message will fit
+**                  into one buffer.
+**
+*******************************************************************************/
+static HC_BT_HDR *acl_rx_frame_buffer_alloc (void)
+{
+    uint8_t     *p;
+    uint16_t    handle;
+    uint16_t    hci_len;
+    uint16_t    total_len;
+    uint8_t     pkt_type;
+    HC_BT_HDR  *p_return_buf = NULL;
+    tHCI_MCT_CB  *p_cb = &mct_cb;
+
+
+    p = p_cb->rcv_acl.preload_buffer;
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (hci_len, p);
+    STREAM_TO_UINT16 (total_len, p);
+
+    pkt_type = (uint8_t)(((handle) >> 12) & 0x0003);
+    handle   = (uint16_t)((handle) & 0x0FFF);
+
+    if (p_cb->acl_rx_q.count)
+    {
+        uint16_t save_handle;
+        HC_BT_HDR *p_hdr = p_cb->acl_rx_q.p_first;
+
+        while (p_hdr != NULL)
+        {
+            p = (uint8_t *)(p_hdr + 1);
+            STREAM_TO_UINT16 (save_handle, p);
+            save_handle   = (uint16_t)((save_handle) & 0x0FFF);
+            if (save_handle == handle)
+            {
+                p_return_buf = p_hdr;
+                break;
+            }
+            p_hdr = utils_getnext(p_hdr);
+        }
+    }
+
+    if (pkt_type == ACL_RX_PKT_START)       /*** START PACKET ***/
+    {
+        /* Might have read 2 bytes for the L2CAP payload length */
+        p_cb->rcv_acl.rcv_len = (hci_len) ? (hci_len - 2) : 0;
+
+        /* Start of packet. If we were in the middle of receiving */
+        /* a packet on the same ACL handle, the original packet is incomplete.
+         * Drop it. */
+        if (p_return_buf)
+        {
+            ALOGW("dropping incomplete ACL frame");
+
+            utils_remove_from_queue(&(p_cb->acl_rx_q), p_return_buf);
+
+            if (bt_hc_cbacks)
+            {
+                bt_hc_cbacks->dealloc((TRANSAC) p_return_buf, \
+                                          (char *) (p_return_buf + 1));
+            }
+            p_return_buf = NULL;
+        }
+
+        /* Allocate a buffer for message */
+        if (bt_hc_cbacks)
+        {
+            int len = total_len + HCI_ACL_PREAMBLE_SIZE + L2CAP_HEADER_SIZE + \
+                      BT_HC_HDR_SIZE;
+            p_return_buf = (HC_BT_HDR *) bt_hc_cbacks->alloc(len);
+        }
+
+        if (p_return_buf)
+        {
+            /* Initialize buffer with preloaded data */
+            p_return_buf->offset = 0;
+            p_return_buf->layer_specific = 0;
+            p_return_buf->event = MSG_HC_TO_STACK_HCI_ACL;
+            p_return_buf->len = p_cb->rcv_acl.preload_count;
+            memcpy((uint8_t *)(p_return_buf + 1), p_cb->rcv_acl.preload_buffer, \
+                   p_cb->rcv_acl.preload_count);
+
+            if (hci_len && ((total_len + L2CAP_HEADER_SIZE) > hci_len))
+            {
+                /* Will expect to see fragmented ACL packets */
+                /* Keep the base buffer address in the watching queue */
+                utils_enqueue(&(p_cb->acl_rx_q), p_return_buf);
+            }
+        }
+    }
+    else                                    /*** CONTINUATION PACKET ***/
+    {
+        p_cb->rcv_acl.rcv_len = hci_len;
+
+        if (p_return_buf)
+        {
+            /* Packet continuation and found the original rx buffer */
+            uint8_t *p_f = p = (uint8_t *)(p_return_buf + 1) + 2;
+
+            STREAM_TO_UINT16 (total_len, p);
+
+            /* Update HCI header of first segment (base buffer) with new len */
+            total_len += hci_len;
+            UINT16_TO_STREAM (p_f, total_len);
+        }
+    }
+
+    return (p_return_buf);
+}
+
+/*******************************************************************************
+**
+** Function         acl_rx_frame_end_chk
+**
+** Description      This function is called from the HCI transport when the last
+**                  byte of an HCI ACL packet has been received. It checks if
+**                  the L2CAP message is complete, i.e. no more continuation
+**                  packets are expected.
+**
+** Returns          TRUE if message complete, FALSE if continuation expected
+**
+*******************************************************************************/
+static uint8_t acl_rx_frame_end_chk (void)
+{
+    uint8_t     *p;
+    uint16_t    handle, hci_len, l2cap_len;
+    HC_BT_HDR  *p_buf;
+    tHCI_MCT_CB  *p_cb = &mct_cb;
+    uint8_t     frame_end=TRUE;
+
+    p_buf = p_cb->rcv_acl.p_rcv_msg;
+    p = (uint8_t *)(p_buf + 1);
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (hci_len, p);
+    STREAM_TO_UINT16 (l2cap_len, p);
+
+    if (hci_len > 0)
+    {
+        if (l2cap_len > (p_buf->len-(HCI_ACL_PREAMBLE_SIZE+L2CAP_HEADER_SIZE)) )
+        {
+            /* If the L2CAP length has not been reached, tell caller not to send
+             * this buffer to stack */
+            frame_end = FALSE;
+        }
+        else
+        {
+            /*
+             * The current buffer coulb be in the watching list.
+             * Remove it from the list if it is in.
+             */
+            if (p_cb->acl_rx_q.count)
+                utils_remove_from_queue(&(p_cb->acl_rx_q), p_buf);
+        }
+    }
+
+    /****
+     ** Print snoop trace
+     ****/
+    if (p_buf->offset)
+    {
+        /* CONTINUATION PACKET */
+
+        /* save original p_buf->len content */
+        uint16_t tmp_u16 = p_buf->len;
+
+        /* borrow HCI_ACL_PREAMBLE_SIZE bytes from the payload section */
+        p = (uint8_t *)(p_buf + 1) + p_buf->offset - HCI_ACL_PREAMBLE_SIZE;
+
+        /* save contents */
+        memcpy(p_cb->rcv_acl.preload_buffer, p, HCI_ACL_PREAMBLE_SIZE);
+
+        /* Set packet boundary flags to "continuation packet" */
+        handle = (handle & 0xCFFF) | 0x1000;
+
+        /* write handl & length info */
+        UINT16_TO_STREAM (p, handle);
+        UINT16_TO_STREAM (p, (p_buf->len - p_buf->offset));
+
+        /* roll pointer back */
+        p = p - HCI_ACL_PREAMBLE_SIZE;
+
+        /* adjust `p_buf->offset` & `p_buf->len`
+         * before calling btsnoop_capture() */
+        p_buf->offset = p_buf->offset - HCI_ACL_PREAMBLE_SIZE;
+        p_buf->len = p_buf->len - p_buf->offset;
+
+        btsnoop_capture(p_buf, TRUE);
+
+        /* restore contents */
+        memcpy(p, p_cb->rcv_acl.preload_buffer, HCI_ACL_PREAMBLE_SIZE);
+
+        /* restore p_buf->len */
+        p_buf->len = tmp_u16;
+    }
+    else
+    {
+        /* START PACKET */
+        btsnoop_capture(p_buf, TRUE);
+    }
+
+    if (frame_end == TRUE)
+        p_buf->offset = 0;
+    else
+        p_buf->offset = p_buf->len; /* save current buffer-end position */
+
+    return frame_end;
+}
+
+/*****************************************************************************
+**   HCI MCT INTERFACE FUNCTIONS
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        hci_mct_init
+**
+** Description     Initialize MCT module
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_mct_init(void)
+{
+    HCIDBG("hci_mct_init");
+
+    memset(&mct_cb, 0, sizeof(tHCI_MCT_CB));
+    utils_queue_init(&(mct_cb.acl_rx_q));
+
+    /* Per HCI spec., always starts with 1 */
+    num_hci_cmd_pkts = 1;
+
+    /* Give an initial values of Host Controller's ACL data packet length
+     * Will update with an internal HCI(_LE)_Read_Buffer_Size request
+     */
+    mct_cb.hc_acl_data_size = 1021;
+    mct_cb.hc_ble_acl_data_size = 27;
+
+    btsnoop_init();
+}
+
+/*******************************************************************************
+**
+** Function        hci_mct_cleanup
+**
+** Description     Clean MCT module
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_mct_cleanup(void)
+{
+    HCIDBG("hci_mct_cleanup");
+
+    btsnoop_close();
+    btsnoop_cleanup();
+}
+
+/*******************************************************************************
+**
+** Function        hci_mct_send_msg
+**
+** Description     Determine message type, then send message through according
+**                 channel
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_mct_send_msg(HC_BT_HDR *p_msg)
+{
+    uint16_t handle;
+    uint16_t lay_spec;
+    uint8_t *p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+    uint16_t event = p_msg->event & MSG_EVT_MASK;
+    uint16_t sub_event = p_msg->event & MSG_SUB_EVT_MASK;
+    uint16_t acl_pkt_size = 0, acl_data_size = 0;
+
+    /* wake up BT device if its in sleep mode */
+    lpm_wake_assert();
+
+    if (sub_event == LOCAL_BR_EDR_CONTROLLER_ID)
+    {
+        acl_data_size = mct_cb.hc_acl_data_size;
+        acl_pkt_size = mct_cb.hc_acl_data_size + HCI_ACL_PREAMBLE_SIZE;
+    }
+    else
+    {
+        acl_data_size = mct_cb.hc_ble_acl_data_size;
+        acl_pkt_size = mct_cb.hc_ble_acl_data_size + HCI_ACL_PREAMBLE_SIZE;
+    }
+
+    /* Check if sending ACL data that needs fragmenting */
+    if ((event == MSG_STACK_TO_HC_HCI_ACL) && (p_msg->len > acl_pkt_size))
+    {
+        /* Get the handle from the packet */
+        STREAM_TO_UINT16 (handle, p);
+
+        /* Set packet boundary flags to "continuation packet" */
+        handle = (handle & 0xCFFF) | 0x1000;
+
+        /* Do all the first chunks */
+        while (p_msg->len > acl_pkt_size)
+        {
+            p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+
+            userial_write(event, (uint8_t *) p, acl_pkt_size);
+
+            /* generate snoop trace message */
+            btsnoop_capture(p_msg, FALSE);
+
+            /* Adjust offset and length for what we just sent */
+            p_msg->offset += acl_data_size;
+            p_msg->len    -= acl_data_size;
+
+            p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+
+            UINT16_TO_STREAM (p, handle);
+
+            if (p_msg->len > acl_pkt_size)
+            {
+                UINT16_TO_STREAM (p, acl_data_size);
+            }
+            else
+            {
+                UINT16_TO_STREAM (p, p_msg->len - HCI_ACL_PREAMBLE_SIZE);
+            }
+
+            /* If we were only to send partial buffer, stop when done.    */
+            /* Send the buffer back to L2CAP to send the rest of it later */
+            if (p_msg->layer_specific)
+            {
+                if (--p_msg->layer_specific == 0)
+                {
+                    p_msg->event = MSG_HC_TO_STACK_L2C_SEG_XMIT;
+
+                    if (bt_hc_cbacks)
+                    {
+                        bt_hc_cbacks->tx_result((TRANSAC) p_msg, \
+                                                    (char *) (p_msg + 1), \
+                                                    BT_HC_TX_FRAGMENT);
+                    }
+
+                    return;
+                }
+            }
+        }
+    }
+
+    p = ((uint8_t *)(p_msg + 1)) + p_msg->offset;
+
+    if (event == MSG_STACK_TO_HC_HCI_CMD)
+    {
+        uint8_t *p_tmp = p;
+
+        utils_lock();
+        num_hci_cmd_pkts--;
+        utils_unlock();
+
+        /* If this is an internal Cmd packet, the layer_specific field would
+         * have stored with the opcode of HCI command.
+         * Retrieve the opcode from the Cmd packet.
+         */
+        p_tmp++;
+        STREAM_TO_UINT16(lay_spec, p_tmp);
+    }
+
+    userial_write(event, (uint8_t *) p, p_msg->len);
+
+
+    /* generate snoop trace message */
+    btsnoop_capture(p_msg, FALSE);
+
+    if (bt_hc_cbacks)
+    {
+        if ((event == MSG_STACK_TO_HC_HCI_CMD) && \
+            (mct_cb.int_cmd_rsp_pending > 0) && \
+            (p_msg->layer_specific == lay_spec))
+        {
+            /* dealloc buffer of internal command */
+            bt_hc_cbacks->dealloc((TRANSAC) p_msg, (char *) (p_msg + 1));
+        }
+        else
+        {
+            bt_hc_cbacks->tx_result((TRANSAC) p_msg, (char *) (p_msg + 1), \
+                                        BT_HC_TX_SUCCESS);
+        }
+    }
+
+    lpm_tx_done(TRUE);
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_mct_receive_evt_msg
+**
+** Description     Construct HCI EVENT packet
+**
+** Returns         Number of read bytes
+**
+*******************************************************************************/
+uint16_t hci_mct_receive_evt_msg(void)
+{
+    uint16_t    bytes_read = 0;
+    uint8_t     byte;
+    uint16_t    msg_len, len;
+    uint8_t     msg_received;
+    tHCI_RCV_CB  *p_cb=&mct_cb.rcv_evt;
+    uint8_t     continue_fetch_looping = TRUE;
+
+    while (continue_fetch_looping)
+    {
+        /* Read one byte to see if there is anything waiting to be read */
+        if (userial_read(MSG_HC_TO_STACK_HCI_EVT, &byte, 1) == 0)
+        {
+            break;
+        }
+
+        bytes_read++;
+        msg_received = FALSE;
+
+        switch (p_cb->rcv_state)
+        {
+        case MCT_RX_NEWMSG_ST:
+            /* Start of new message */
+            /* Initialize rx parameters */
+            memset(p_cb->preload_buffer, 0 , 6);
+            p_cb->preload_buffer[0] = byte;
+            p_cb->preload_count = 1;
+            p_cb->rcv_len = HCI_EVT_PREAMBLE_SIZE - 1;
+            // p_cb->p_rcv_msg = NULL;
+            p_cb->rcv_state = MCT_RX_LEN_ST; /* Next, wait for length to come */
+            break;
+
+        case MCT_RX_LEN_ST:
+            /* Receiving preamble */
+            p_cb->preload_buffer[p_cb->preload_count++] = byte;
+            p_cb->rcv_len--;
+
+            /* Check if we received entire preamble yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Received entire preamble.
+                 * Length is in the last received byte */
+                msg_len = byte;
+                p_cb->rcv_len = msg_len;
+
+                /* Allocate a buffer for message */
+                if (bt_hc_cbacks)
+                {
+                    len = msg_len + p_cb->preload_count + BT_HC_HDR_SIZE;
+                    p_cb->p_rcv_msg = \
+                        (HC_BT_HDR *) bt_hc_cbacks->alloc(len);
+                }
+
+                if (p_cb->p_rcv_msg)
+                {
+                    /* Initialize buffer with preloaded data */
+                    p_cb->p_rcv_msg->offset = 0;
+                    p_cb->p_rcv_msg->layer_specific = 0;
+                    p_cb->p_rcv_msg->event = MSG_HC_TO_STACK_HCI_EVT;
+                    p_cb->p_rcv_msg->len = p_cb->preload_count;
+                    memcpy((uint8_t *)(p_cb->p_rcv_msg + 1), \
+                           p_cb->preload_buffer, p_cb->preload_count);
+                }
+                else
+                {
+                    /* Unable to acquire message buffer. */
+                    ALOGE( \
+                     "Unable to acquire buffer for incoming HCI message." \
+                    );
+
+                    if (msg_len == 0)
+                    {
+                        /* Wait for next message */
+                        p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                        continue_fetch_looping = FALSE;
+                    }
+                    else
+                    {
+                        /* Ignore rest of the packet */
+                        p_cb->rcv_state = MCT_RX_IGNORE_ST;
+                    }
+
+                    break;
+                }
+
+                /* Message length is valid */
+                if (msg_len)
+                {
+                    /* Read rest of message */
+                    p_cb->rcv_state = MCT_RX_DATA_ST;
+                }
+                else
+                {
+                    /* Message has no additional parameters.
+                     * (Entire message has been received) */
+                    msg_received = TRUE;
+
+                    /* Next, wait for next message */
+                    p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                    continue_fetch_looping = FALSE;
+                }
+            }
+            break;
+
+        case MCT_RX_DATA_ST:
+            *((uint8_t *)(p_cb->p_rcv_msg + 1) + p_cb->p_rcv_msg->len++) = byte;
+            p_cb->rcv_len--;
+
+            if (p_cb->rcv_len > 0)
+            {
+                /* Read in the rest of the message */
+                len = userial_read(MSG_HC_TO_STACK_HCI_EVT, \
+                      ((uint8_t *)(p_cb->p_rcv_msg+1) + p_cb->p_rcv_msg->len), \
+                      p_cb->rcv_len);
+                p_cb->p_rcv_msg->len += len;
+                p_cb->rcv_len -= len;
+                bytes_read += len;
+            }
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Received entire packet. */
+                msg_received = TRUE;
+                /* Next, wait for next message */
+                p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                continue_fetch_looping = FALSE;
+            }
+            break;
+
+
+        case MCT_RX_IGNORE_ST:
+            /* Ignore reset of packet */
+            p_cb->rcv_len--;
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Next, wait for next message */
+                p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                continue_fetch_looping = FALSE;
+            }
+            break;
+        }
+
+
+        /* If we received entire message, then send it to the task */
+        if (msg_received)
+        {
+            uint8_t intercepted = FALSE;
+
+            /* generate snoop trace message */
+            btsnoop_capture(p_cb->p_rcv_msg, TRUE);
+
+            intercepted = internal_event_intercept();
+
+            if ((bt_hc_cbacks) && (intercepted == FALSE))
+            {
+                bt_hc_cbacks->data_ind((TRANSAC) p_cb->p_rcv_msg, \
+                                       (char *) (p_cb->p_rcv_msg + 1), \
+                                       p_cb->p_rcv_msg->len + BT_HC_HDR_SIZE);
+            }
+            p_cb->p_rcv_msg = NULL;
+        }
+    }
+
+    return (bytes_read);
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_mct_receive_acl_msg
+**
+** Description     Construct HCI ACL packet
+**
+** Returns         Number of read bytes
+**
+*******************************************************************************/
+uint16_t hci_mct_receive_acl_msg(void)
+{
+    uint16_t    bytes_read = 0;
+    uint8_t     byte;
+    uint16_t    msg_len, len;
+    uint8_t     msg_received;
+    tHCI_RCV_CB *p_cb=&mct_cb.rcv_acl;
+    uint8_t     continue_fetch_looping = TRUE;
+
+    while (continue_fetch_looping)
+    {
+        /* Read one byte to see if there is anything waiting to be read */
+        if (userial_read(MSG_HC_TO_STACK_HCI_ACL, &byte, 1) == 0)
+        {
+            break;
+        }
+
+        bytes_read++;
+        msg_received = FALSE;
+
+        switch (p_cb->rcv_state)
+        {
+        case MCT_RX_NEWMSG_ST:
+            /* Start of new message */
+            /* Initialize rx parameters */
+            memset(p_cb->preload_buffer, 0 , 6);
+            p_cb->preload_buffer[0] = byte;
+            p_cb->preload_count = 1;
+            p_cb->rcv_len = HCI_ACL_PREAMBLE_SIZE - 1;
+            // p_cb->p_rcv_msg = NULL;
+            p_cb->rcv_state = MCT_RX_LEN_ST; /* Next, wait for length to come */
+            break;
+
+        case MCT_RX_LEN_ST:
+            /* Receiving preamble */
+            p_cb->preload_buffer[p_cb->preload_count++] = byte;
+            p_cb->rcv_len--;
+
+            /* Check if we received entire preamble yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* ACL data lengths are 16-bits */
+                msg_len = p_cb->preload_buffer[3];
+                msg_len = (msg_len << 8) + p_cb->preload_buffer[2];
+
+                if (msg_len && (p_cb->preload_count == 4))
+                {
+                    /* Check if this is a start packet */
+                    byte = ((p_cb->preload_buffer[1] >> 4) & 0x03);
+
+                    if (byte == ACL_RX_PKT_START)
+                    {
+                       /*
+                        * A start packet & with non-zero data payload length.
+                        * We want to read 2 more bytes to get L2CAP payload
+                        * length.
+                        */
+                        p_cb->rcv_len = 2;
+
+                        break;
+                    }
+                }
+
+                /*
+                 * Check for segmented packets. If this is a continuation
+                 * packet, then we will continue appending data to the
+                 * original rcv buffer.
+                 */
+                p_cb->p_rcv_msg = acl_rx_frame_buffer_alloc();
+
+                if (p_cb->p_rcv_msg == NULL)
+                {
+                    /* Unable to acquire message buffer. */
+                    ALOGE( \
+                     "Unable to acquire buffer for incoming HCI message." \
+                    );
+
+                    if (msg_len == 0)
+                    {
+                        /* Wait for next message */
+                        p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                        continue_fetch_looping = FALSE;
+                    }
+                    else
+                    {
+                        /* Ignore rest of the packet */
+                        p_cb->rcv_state = MCT_RX_IGNORE_ST;
+                    }
+
+                    break;
+                }
+
+                /* Message length is valid */
+                if (msg_len)
+                {
+                    /* Read rest of message */
+                    p_cb->rcv_state = MCT_RX_DATA_ST;
+                }
+                else
+                {
+                    /* Message has no additional parameters.
+                     * (Entire message has been received) */
+                    acl_rx_frame_end_chk(); /* to print snoop trace */
+
+                    msg_received = TRUE;
+
+                    /* Next, wait for next message */
+                    p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                    continue_fetch_looping = FALSE;
+                }
+            }
+            break;
+
+        case MCT_RX_DATA_ST:
+            *((uint8_t *)(p_cb->p_rcv_msg + 1) + p_cb->p_rcv_msg->len++) = byte;
+            p_cb->rcv_len--;
+
+            if (p_cb->rcv_len > 0)
+            {
+                /* Read in the rest of the message */
+                len = userial_read(MSG_HC_TO_STACK_HCI_ACL, \
+                      ((uint8_t *)(p_cb->p_rcv_msg+1) + p_cb->p_rcv_msg->len), \
+                      p_cb->rcv_len);
+                p_cb->p_rcv_msg->len += len;
+                p_cb->rcv_len -= len;
+                bytes_read += len;
+            }
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Received entire packet. */
+                /* Check for segmented l2cap packets */
+                if (acl_rx_frame_end_chk())
+                {
+                    msg_received = TRUE;
+                }
+
+                /* Next, wait for next message */
+                p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                continue_fetch_looping = FALSE;
+            }
+            break;
+
+
+        case MCT_RX_IGNORE_ST:
+            /* Ignore reset of packet */
+            p_cb->rcv_len--;
+
+            /* Check if we read in entire message yet */
+            if (p_cb->rcv_len == 0)
+            {
+                /* Next, wait for next message */
+                p_cb->rcv_state = MCT_RX_NEWMSG_ST;
+                continue_fetch_looping = FALSE;
+            }
+            break;
+        }
+
+
+        /* If we received entire message, then send it to the task */
+        if (msg_received)
+        {
+            if (bt_hc_cbacks)
+            {
+                bt_hc_cbacks->data_ind((TRANSAC) p_cb->p_rcv_msg, \
+                                       (char *) (p_cb->p_rcv_msg + 1), \
+                                       p_cb->p_rcv_msg->len + BT_HC_HDR_SIZE);
+            }
+            p_cb->p_rcv_msg = NULL;
+        }
+    }
+
+    return (bytes_read);
+}
+
+/*******************************************************************************
+**
+** Function        hci_mct_send_int_cmd
+**
+** Description     Place the internal commands (issued internally by hci or
+**                 vendor lib) in the tx_q.
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t hci_mct_send_int_cmd(uint16_t opcode, HC_BT_HDR *p_buf, \
+                                  tINT_CMD_CBACK p_cback)
+{
+    if (mct_cb.int_cmd_rsp_pending > INT_CMD_PKT_MAX_COUNT)
+    {
+        ALOGE( \
+        "Allow only %d outstanding internal commands at a time [Reject 0x%04X]"\
+        , INT_CMD_PKT_MAX_COUNT, opcode);
+        return FALSE;
+    }
+
+    mct_cb.int_cmd_rsp_pending++;
+    mct_cb.int_cmd[mct_cb.int_cmd_wrt_idx].opcode = opcode;
+    mct_cb.int_cmd[mct_cb.int_cmd_wrt_idx].cback = p_cback;
+    mct_cb.int_cmd_wrt_idx = ((mct_cb.int_cmd_wrt_idx+1) & INT_CMD_PKT_IDX_MASK);
+
+    /* stamp signature to indicate an internal command */
+    p_buf->layer_specific = opcode;
+
+    utils_enqueue(&tx_q, (void *) p_buf);
+    bthc_signal_event(HC_EVENT_TX);
+
+    return TRUE;
+}
+
+
+/*******************************************************************************
+**
+** Function        hci_mct_get_acl_data_length
+**
+** Description     Issue HCI_READ_BUFFER_SIZE command to retrieve Controller's
+**                 ACL data length setting
+**
+** Returns         None
+**
+*******************************************************************************/
+void hci_mct_get_acl_data_length(void)
+{
+    HC_BT_HDR  *p_buf = NULL;
+    uint8_t     *p, ret;
+
+    if (bt_hc_cbacks)
+    {
+        p_buf = (HC_BT_HDR *) bt_hc_cbacks->alloc(BT_HC_HDR_SIZE + \
+                                                       HCI_CMD_PREAMBLE_SIZE);
+    }
+
+    if (p_buf)
+    {
+        p_buf->event = MSG_STACK_TO_HC_HCI_CMD;
+        p_buf->offset = 0;
+        p_buf->layer_specific = 0;
+        p_buf->len = HCI_CMD_PREAMBLE_SIZE;
+
+        p = (uint8_t *) (p_buf + 1);
+        UINT16_TO_STREAM(p, HCI_READ_BUFFER_SIZE);
+        *p = 0;
+
+        if ((ret = hci_mct_send_int_cmd(HCI_READ_BUFFER_SIZE, p_buf, \
+                                       get_acl_data_length_cback)) == FALSE)
+        {
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+        }
+        else
+            return;
+    }
+
+    if (bt_hc_cbacks)
+    {
+        ALOGE("hci lib postload aborted");
+        bt_hc_cbacks->postload_cb(NULL, BT_HC_POSTLOAD_FAIL);
+    }
+}
+
+
+/******************************************************************************
+**  HCI MCT Services interface table
+******************************************************************************/
+
+const tHCI_IF hci_mct_func_table =
+{
+    hci_mct_init,
+    hci_mct_cleanup,
+    hci_mct_send_msg,
+    hci_mct_send_int_cmd,
+    hci_mct_get_acl_data_length,
+    hci_mct_receive_evt_msg,
+    hci_mct_receive_acl_msg
+};
+
+
diff --git a/hci/src/lpm.c b/hci/src/lpm.c
new file mode 100644
index 0000000..fb6f837
--- /dev/null
+++ b/hci/src/lpm.c
@@ -0,0 +1,425 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      lpm.c
+ *
+ *  Description:   Contains low power mode implementation
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_lpm"
+
+#include <utils/Log.h>
+#include <signal.h>
+#include <time.h>
+#include "bt_hci_bdroid.h"
+#include "bt_vendor_lib.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef BTLPM_DBG
+#define BTLPM_DBG FALSE
+#endif
+
+#if (BTLPM_DBG == TRUE)
+#define BTLPMDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
+#else
+#define BTLPMDBG(param, ...) {}
+#endif
+
+#ifndef DEFAULT_LPM_IDLE_TIMEOUT
+#define DEFAULT_LPM_IDLE_TIMEOUT    3000
+#endif
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern bt_vendor_interface_t *bt_vnd_if;
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+/* Low power mode state */
+enum {
+    LPM_DISABLED = 0,                    /* initial state */
+    LPM_ENABLED,
+    LPM_ENABLING,
+    LPM_DISABLING
+};
+
+/* LPM WAKE state */
+enum {
+    LPM_WAKE_DEASSERTED = 0,              /* initial state */
+    LPM_WAKE_W4_TX_DONE,
+    LPM_WAKE_W4_TIMEOUT,
+    LPM_WAKE_ASSERTED
+};
+
+/* low power mode control block */
+typedef struct
+{
+    uint8_t state;                          /* Low power mode state */
+    uint8_t wake_state;                     /* LPM WAKE state */
+    uint8_t no_tx_data;
+    uint8_t timer_created;
+    timer_t timer_id;
+    uint32_t timeout_ms;
+} bt_lpm_cb_t;
+
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static bt_lpm_cb_t bt_lpm_cb;
+
+/******************************************************************************
+**   LPM Static Functions
+******************************************************************************/
+
+/*******************************************************************************
+**
+** Function        lpm_idle_timeout
+**
+** Description     Timeout thread of transport idle timer
+**
+** Returns         None
+**
+*******************************************************************************/
+static void lpm_idle_timeout(union sigval arg)
+{
+    BTLPMDBG("..lpm_idle_timeout..");
+
+    if ((bt_lpm_cb.state == LPM_ENABLED) && \
+        (bt_lpm_cb.wake_state == LPM_WAKE_W4_TIMEOUT))
+    {
+        bthc_signal_event(HC_EVENT_LPM_IDLE_TIMEOUT);
+    }
+}
+
+/*******************************************************************************
+**
+** Function        lpm_start_transport_idle_timer
+**
+** Description     Launch transport idle timer
+**
+** Returns         None
+**
+*******************************************************************************/
+static void lpm_start_transport_idle_timer(void)
+{
+    int status;
+    struct itimerspec ts;
+    struct sigevent se;
+
+    if (bt_lpm_cb.state != LPM_ENABLED)
+        return;
+
+    if (bt_lpm_cb.timer_created == FALSE)
+    {
+        se.sigev_notify = SIGEV_THREAD;
+        se.sigev_value.sival_ptr = &bt_lpm_cb.timer_id;
+        se.sigev_notify_function = lpm_idle_timeout;
+        se.sigev_notify_attributes = NULL;
+
+        status = timer_create(CLOCK_MONOTONIC, &se, &bt_lpm_cb.timer_id);
+
+        if (status == 0)
+            bt_lpm_cb.timer_created = TRUE;
+    }
+
+    if (bt_lpm_cb.timer_created == TRUE)
+    {
+        ts.it_value.tv_sec = bt_lpm_cb.timeout_ms/1000;
+        ts.it_value.tv_nsec = 1000*(bt_lpm_cb.timeout_ms%1000);
+        ts.it_interval.tv_sec = 0;
+        ts.it_interval.tv_nsec = 0;
+
+        status = timer_settime(bt_lpm_cb.timer_id, 0, &ts, 0);
+        if (status == -1)
+            ALOGE("[START] Failed to set LPM idle timeout");
+    }
+}
+
+/*******************************************************************************
+**
+** Function        lpm_stop_transport_idle_timer
+**
+** Description     Launch transport idle timer
+**
+** Returns         None
+**
+*******************************************************************************/
+static void lpm_stop_transport_idle_timer(void)
+{
+    int status;
+    struct itimerspec ts;
+
+    if (bt_lpm_cb.timer_created == TRUE)
+    {
+        ts.it_value.tv_sec = 0;
+        ts.it_value.tv_nsec = 0;
+        ts.it_interval.tv_sec = 0;
+        ts.it_interval.tv_nsec = 0;
+
+        status = timer_settime(bt_lpm_cb.timer_id, 0, &ts, 0);
+        if (status == -1)
+            ALOGE("[STOP] Failed to set LPM idle timeout");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         lpm_vnd_cback
+**
+** Description      Callback of vendor specific result for lpm enable/disable
+**                  rquest
+**
+** Returns          None
+**
+*******************************************************************************/
+void lpm_vnd_cback(uint8_t vnd_result)
+{
+    if (vnd_result == 0)
+    {
+        /* Status == Success */
+        bt_lpm_cb.state = (bt_lpm_cb.state == LPM_ENABLING) ? \
+                          LPM_ENABLED : LPM_DISABLED;
+    }
+    else
+    {
+        bt_lpm_cb.state = (bt_lpm_cb.state == LPM_ENABLING) ? \
+                          LPM_DISABLED : LPM_ENABLED;
+    }
+
+    if (bt_hc_cbacks)
+    {
+        if (bt_lpm_cb.state == LPM_ENABLED)
+            bt_hc_cbacks->lpm_cb(BT_HC_LPM_ENABLED);
+        else
+            bt_hc_cbacks->lpm_cb(BT_HC_LPM_DISABLED);
+    }
+
+    if (bt_lpm_cb.state == LPM_DISABLED)
+    {
+        if (bt_lpm_cb.timer_created == TRUE)
+        {
+            timer_delete(bt_lpm_cb.timer_id);
+        }
+
+        memset(&bt_lpm_cb, 0, sizeof(bt_lpm_cb_t));
+    }
+}
+
+
+/*****************************************************************************
+**   Low Power Mode Interface Functions
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        lpm_init
+**
+** Description     Init LPM
+**
+** Returns         None
+**
+*******************************************************************************/
+void lpm_init(void)
+{
+    memset(&bt_lpm_cb, 0, sizeof(bt_lpm_cb_t));
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+        bt_vnd_if->op(BT_VND_OP_GET_LPM_IDLE_TIMEOUT, &(bt_lpm_cb.timeout_ms));
+    else
+        bt_lpm_cb.timeout_ms = DEFAULT_LPM_IDLE_TIMEOUT;
+}
+
+/*******************************************************************************
+**
+** Function        lpm_cleanup
+**
+** Description     Clean up
+**
+** Returns         None
+**
+*******************************************************************************/
+void lpm_cleanup(void)
+{
+    if (bt_lpm_cb.timer_created == TRUE)
+    {
+        timer_delete(bt_lpm_cb.timer_id);
+    }
+}
+
+/*******************************************************************************
+**
+** Function        lpm_enable
+**
+** Description     Enalbe/Disable LPM
+**
+** Returns         None
+**
+*******************************************************************************/
+void lpm_enable(uint8_t turn_on)
+{
+    if ((bt_lpm_cb.state!=LPM_DISABLED) && (bt_lpm_cb.state!=LPM_ENABLED))
+    {
+        ALOGW("Still busy on processing prior LPM enable/disable request...");
+        return;
+    }
+
+    if ((turn_on == TRUE) && (bt_lpm_cb.state == LPM_ENABLED))
+    {
+        ALOGI("LPM is already on!!!");
+        if (bt_hc_cbacks)
+            bt_hc_cbacks->lpm_cb(BT_HC_LPM_ENABLED);
+    }
+    else if ((turn_on == FALSE) && (bt_lpm_cb.state == LPM_DISABLED))
+    {
+        ALOGI("LPM is already off!!!");
+        if (bt_hc_cbacks)
+            bt_hc_cbacks->lpm_cb(BT_HC_LPM_DISABLED);
+    }
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+    {
+        uint8_t lpm_cmd = (turn_on) ? BT_VND_LPM_ENABLE : BT_VND_LPM_DISABLE;
+        bt_lpm_cb.state = (turn_on) ? LPM_ENABLING : LPM_DISABLING;
+        bt_vnd_if->op(BT_VND_OP_LPM_SET_MODE, &lpm_cmd);
+    }
+}
+
+/*******************************************************************************
+**
+** Function          lpm_tx_done
+**
+** Description       This function is to inform the lpm module
+**                   if data is waiting in the Tx Q or not.
+**
+**                   IsTxDone: TRUE if All data in the Tx Q are gone
+**                             FALSE if any data is still in the Tx Q.
+**                   Typicaly this function must be called
+**                   before USERIAL Write and in the Tx Done routine
+**
+** Returns           None
+**
+*******************************************************************************/
+void lpm_tx_done(uint8_t is_tx_done)
+{
+    bt_lpm_cb.no_tx_data = is_tx_done;
+
+    if ((bt_lpm_cb.wake_state==LPM_WAKE_W4_TX_DONE) && (is_tx_done==TRUE))
+    {
+        bt_lpm_cb.wake_state = LPM_WAKE_W4_TIMEOUT;
+        lpm_start_transport_idle_timer();
+    }
+}
+
+/*******************************************************************************
+**
+** Function        lpm_wake_assert
+**
+** Description     Called to wake up Bluetooth chip.
+**                 Normally this is called when there is data to be sent
+**                 over UART.
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+void lpm_wake_assert(void)
+{
+    if (bt_lpm_cb.state != LPM_DISABLED)
+    {
+        BTLPMDBG("LPM WAKE assert");
+
+        /* Calling vendor-specific part */
+        if (bt_vnd_if)
+        {
+            uint8_t state = BT_VND_LPM_WAKE_ASSERT;
+            bt_vnd_if->op(BT_VND_OP_LPM_WAKE_SET_STATE, &state);
+        }
+
+        lpm_stop_transport_idle_timer();
+
+        bt_lpm_cb.wake_state = LPM_WAKE_ASSERTED;
+    }
+
+    lpm_tx_done(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function        lpm_allow_bt_device_sleep
+**
+** Description     Start LPM idle timer if allowed
+**
+** Returns         None
+**
+*******************************************************************************/
+void lpm_allow_bt_device_sleep(void)
+{
+    if ((bt_lpm_cb.state == LPM_ENABLED) && \
+        (bt_lpm_cb.wake_state == LPM_WAKE_ASSERTED))
+    {
+        if(bt_lpm_cb.no_tx_data == TRUE)
+        {
+            bt_lpm_cb.wake_state = LPM_WAKE_W4_TIMEOUT;
+            lpm_start_transport_idle_timer();
+        }
+        else
+        {
+            bt_lpm_cb.wake_state = LPM_WAKE_W4_TX_DONE;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         lpm_wake_deassert
+**
+** Description      Deassert wake if allowed
+**
+** Returns          None
+**
+*******************************************************************************/
+void lpm_wake_deassert(void)
+{
+    if ((bt_lpm_cb.state == LPM_ENABLED) && (bt_lpm_cb.no_tx_data == TRUE))
+    {
+        BTLPMDBG("LPM WAKE deassert");
+
+        /* Calling vendor-specific part */
+        if (bt_vnd_if)
+        {
+            uint8_t state = BT_VND_LPM_WAKE_DEASSERT;
+            bt_vnd_if->op(BT_VND_OP_LPM_WAKE_SET_STATE, &state);
+        }
+
+        bt_lpm_cb.wake_state = LPM_WAKE_DEASSERTED;
+    }
+}
+
diff --git a/hci/src/userial.c b/hci/src/userial.c
new file mode 100644
index 0000000..afd3010
--- /dev/null
+++ b/hci/src/userial.c
@@ -0,0 +1,530 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      userial.c
+ *
+ *  Description:   Contains open/read/write/close functions on serial port
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_userial"
+
+#include <utils/Log.h>
+#include <pthread.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <sys/socket.h>
+#include "bt_hci_bdroid.h"
+#include "userial.h"
+#include "utils.h"
+#include "bt_vendor_lib.h"
+#include <sys/prctl.h>
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#ifndef USERIAL_DBG
+#define USERIAL_DBG FALSE
+#endif
+
+#if (USERIAL_DBG == TRUE)
+#define USERIALDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
+#else
+#define USERIALDBG(param, ...) {}
+#endif
+
+#define MAX_SERIAL_PORT (USERIAL_PORT_3 + 1)
+#define READ_LIMIT (BTHC_USERIAL_READ_MEM_SIZE - BT_HC_HDR_SIZE)
+
+enum {
+    USERIAL_RX_EXIT,
+    USERIAL_RX_FLOW_OFF,
+    USERIAL_RX_FLOW_ON
+};
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern bt_vendor_interface_t *bt_vnd_if;
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+typedef struct
+{
+    int             fd;
+    uint8_t         port;
+    pthread_t       read_thread;
+    BUFFER_Q        rx_q;
+    HC_BT_HDR      *p_rx_hdr;
+} tUSERIAL_CB;
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static tUSERIAL_CB userial_cb;
+static volatile uint8_t userial_running = 0;
+
+/******************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**   Socket signal functions to wake up userial_read_thread for termination
+**
+**   creating an unnamed pair of connected sockets
+**      - signal_fds[0]: join fd_set in select call of userial_read_thread
+**      - signal_fds[1]: trigger from userial_close
+*****************************************************************************/
+static int signal_fds[2]={0,1};
+static uint8_t rx_flow_on = TRUE;
+static inline int create_signal_fds(fd_set* set)
+{
+    if(signal_fds[0]==0 && socketpair(AF_UNIX, SOCK_STREAM, 0, signal_fds)<0)
+    {
+        ALOGE("create_signal_sockets:socketpair failed, errno: %d", errno);
+        return -1;
+    }
+    FD_SET(signal_fds[0], set);
+    return signal_fds[0];
+}
+static inline int send_wakeup_signal(char sig_cmd)
+{
+    return send(signal_fds[1], &sig_cmd, sizeof(sig_cmd), 0);
+}
+static inline char reset_signal()
+{
+    char sig_recv = -1;
+    recv(signal_fds[0], &sig_recv, sizeof(sig_recv), MSG_WAITALL);
+    return sig_recv;
+}
+static inline int is_signaled(fd_set* set)
+{
+    return FD_ISSET(signal_fds[0], set);
+}
+
+/*******************************************************************************
+**
+** Function        select_read
+**
+** Description     check if fd is ready for reading and listen for termination
+**                  signal. need to use select in order to avoid collision
+**                  between read and close on the same fd
+**
+** Returns         -1: termination
+**                 >=0: numbers of bytes read back from fd
+**
+*******************************************************************************/
+static int select_read(int fd, uint8_t *pbuf, int len)
+{
+    fd_set input;
+    int n = 0, ret = -1;
+    char reason = 0;
+
+    while (userial_running)
+    {
+        /* Initialize the input fd set */
+        FD_ZERO(&input);
+        if (rx_flow_on == TRUE)
+        {
+            FD_SET(fd, &input);
+        }
+        int fd_max = create_signal_fds(&input);
+        fd_max = fd_max > fd ? fd_max : fd;
+
+        /* Do the select */
+        n = select(fd_max+1, &input, NULL, NULL, NULL);
+        if(is_signaled(&input))
+        {
+            reason = reset_signal();
+            if (reason == USERIAL_RX_EXIT)
+            {
+                USERIALDBG("RX termination");
+                return -1;
+            }
+            else if (reason == USERIAL_RX_FLOW_OFF)
+            {
+                USERIALDBG("RX flow OFF");
+                rx_flow_on = FALSE;
+            }
+            else if (reason == USERIAL_RX_FLOW_ON)
+            {
+                USERIALDBG("RX flow ON");
+                rx_flow_on = TRUE;
+            }
+        }
+
+        if (n > 0)
+        {
+            /* We might have input */
+            if (FD_ISSET(fd, &input))
+            {
+                ret = read(fd, pbuf, (size_t)len);
+                if (0 == ret)
+                    ALOGW( "read() returned 0!" );
+
+                return ret;
+            }
+        }
+        else if (n < 0)
+            ALOGW( "select() Failed");
+        else if (n == 0)
+            ALOGW( "Got a select() TIMEOUT");
+
+    }
+
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function        userial_read_thread
+**
+** Description
+**
+** Returns         void *
+**
+*******************************************************************************/
+static void *userial_read_thread(void *arg)
+{
+    int rx_length = 0;
+    HC_BT_HDR *p_buf = NULL;
+    uint8_t *p;
+
+    USERIALDBG("Entering userial_read_thread()");
+    prctl(PR_SET_NAME, (unsigned long)"userial_read", 0, 0, 0);
+
+    rx_flow_on = TRUE;
+    userial_running = 1;
+
+    while (userial_running)
+    {
+        if (bt_hc_cbacks)
+        {
+            p_buf = (HC_BT_HDR *) bt_hc_cbacks->alloc( \
+                                                BTHC_USERIAL_READ_MEM_SIZE);
+        }
+        else
+            p_buf = NULL;
+
+        if (p_buf != NULL)
+        {
+            p_buf->offset = 0;
+            p_buf->layer_specific = 0;
+
+            p = (uint8_t *) (p_buf + 1);
+            rx_length = select_read(userial_cb.fd, p, READ_LIMIT);
+        }
+        else
+        {
+            rx_length = 0;
+            utils_delay(100);
+            ALOGW("userial_read_thread() failed to gain buffers");
+            continue;
+        }
+
+
+        if (rx_length > 0)
+        {
+            p_buf->len = (uint16_t)rx_length;
+            utils_enqueue(&(userial_cb.rx_q), p_buf);
+            bthc_signal_event(HC_EVENT_RX);
+        }
+        else /* either 0 or < 0 */
+        {
+            ALOGW("select_read return size <=0:%d, exiting userial_read_thread",\
+                 rx_length);
+            /* if we get here, we should have a buffer */
+            bt_hc_cbacks->dealloc((TRANSAC) p_buf, (char *) (p_buf + 1));
+            /* negative value means exit thread */
+            break;
+        }
+    } /* for */
+
+    userial_running = 0;
+    USERIALDBG("Leaving userial_read_thread()");
+    pthread_exit(NULL);
+
+    return NULL;    // Compiler friendly
+}
+
+
+/*****************************************************************************
+**   Userial API Functions
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        userial_init
+**
+** Description     Initializes the userial driver
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_init(void)
+{
+    USERIALDBG("userial_init");
+    memset(&userial_cb, 0, sizeof(tUSERIAL_CB));
+    userial_cb.fd = -1;
+    utils_queue_init(&(userial_cb.rx_q));
+    return TRUE;
+}
+
+
+/*******************************************************************************
+**
+** Function        userial_open
+**
+** Description     Open Bluetooth device with the port ID
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_open(uint8_t port)
+{
+    struct sched_param param;
+    int policy, result;
+    pthread_attr_t thread_attr;
+    int fd_array[CH_MAX];
+
+    USERIALDBG("userial_open(port:%d)", port);
+
+    if (userial_running)
+    {
+        /* Userial is open; close it first */
+        userial_close();
+        utils_delay(50);
+    }
+
+    if (port >= MAX_SERIAL_PORT)
+    {
+        ALOGE("Port > MAX_SERIAL_PORT");
+        return FALSE;
+    }
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+    {
+        result = bt_vnd_if->op(BT_VND_OP_USERIAL_OPEN, &fd_array);
+
+        if (result != 1)
+        {
+            ALOGE("userial_open: wrong numbers of open fd in vendor lib [%d]!",
+                    result);
+            ALOGE("userial_open: HCI UART expects only one open fd");
+            bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+            return FALSE;
+        }
+
+        userial_cb.fd = fd_array[0];
+    }
+    else
+    {
+        ALOGE("userial_open: missing vendor lib interface !!!");
+        ALOGE("userial_open: unable to open UART port");
+        return FALSE;
+    }
+
+    if (userial_cb.fd == -1)
+    {
+        ALOGE("userial_open: failed to open UART port");
+        return FALSE;
+    }
+
+    USERIALDBG( "fd = %d", userial_cb.fd);
+
+    userial_cb.port = port;
+
+    pthread_attr_init(&thread_attr);
+
+    if (pthread_create(&(userial_cb.read_thread), &thread_attr, \
+                       userial_read_thread, NULL) != 0 )
+    {
+        ALOGE("pthread_create failed!");
+        return FALSE;
+    }
+
+    if(pthread_getschedparam(userial_cb.read_thread, &policy, &param)==0)
+    {
+        policy = BTHC_LINUX_BASE_POLICY;
+#if (BTHC_LINUX_BASE_POLICY!=SCHED_NORMAL)
+        param.sched_priority = BTHC_USERIAL_READ_THREAD_PRIORITY;
+#endif
+        result = pthread_setschedparam(userial_cb.read_thread, policy, &param);
+        if (result != 0)
+        {
+            ALOGW("userial_open: pthread_setschedparam failed (%s)", \
+                  strerror(result));
+        }
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function        userial_read
+**
+** Description     Read data from the userial port
+**
+** Returns         Number of bytes actually read from the userial port and
+**                 copied into p_data.  This may be less than len.
+**
+*******************************************************************************/
+uint16_t  userial_read(uint16_t msg_id, uint8_t *p_buffer, uint16_t len)
+{
+    uint16_t total_len = 0;
+    uint16_t copy_len = 0;
+    uint8_t *p_data = NULL;
+
+    do
+    {
+        if(userial_cb.p_rx_hdr != NULL)
+        {
+            p_data = ((uint8_t *)(userial_cb.p_rx_hdr + 1)) + \
+                     (userial_cb.p_rx_hdr->offset);
+
+            if((userial_cb.p_rx_hdr->len) <= (len - total_len))
+                copy_len = userial_cb.p_rx_hdr->len;
+            else
+                copy_len = (len - total_len);
+
+            memcpy((p_buffer + total_len), p_data, copy_len);
+
+            total_len += copy_len;
+
+            userial_cb.p_rx_hdr->offset += copy_len;
+            userial_cb.p_rx_hdr->len -= copy_len;
+
+            if(userial_cb.p_rx_hdr->len == 0)
+            {
+                if (bt_hc_cbacks)
+                    bt_hc_cbacks->dealloc((TRANSAC) userial_cb.p_rx_hdr, \
+                                              (char *) (userial_cb.p_rx_hdr+1));
+
+                userial_cb.p_rx_hdr = NULL;
+            }
+        }
+
+        if(userial_cb.p_rx_hdr == NULL)
+        {
+            userial_cb.p_rx_hdr=(HC_BT_HDR *)utils_dequeue(&(userial_cb.rx_q));
+        }
+    } while ((userial_cb.p_rx_hdr != NULL) && (total_len < len));
+
+    return total_len;
+}
+
+/*******************************************************************************
+**
+** Function        userial_write
+**
+** Description     Write data to the userial port
+**
+** Returns         Number of bytes actually written to the userial port. This
+**                 may be less than len.
+**
+*******************************************************************************/
+uint16_t userial_write(uint16_t msg_id, uint8_t *p_data, uint16_t len)
+{
+    int ret, total = 0;
+
+    while(len != 0)
+    {
+        ret = write(userial_cb.fd, p_data+total, len);
+        total += ret;
+        len -= ret;
+    }
+
+    return ((uint16_t)total);
+}
+
+/*******************************************************************************
+**
+** Function        userial_close
+**
+** Description     Close the userial port
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_close(void)
+{
+    int result;
+    TRANSAC p_buf;
+
+    USERIALDBG("userial_close(fd:%d)", userial_cb.fd);
+
+    if (userial_running)
+        send_wakeup_signal(USERIAL_RX_EXIT);
+
+    if ((result=pthread_join(userial_cb.read_thread, NULL)) < 0)
+        ALOGE( "pthread_join() FAILED result:%d", result);
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+        bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+
+    userial_cb.fd = -1;
+
+    if (bt_hc_cbacks)
+    {
+        while ((p_buf = utils_dequeue (&(userial_cb.rx_q))) != NULL)
+        {
+            bt_hc_cbacks->dealloc(p_buf, (char *) ((HC_BT_HDR *)p_buf+1));
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function        userial_ioctl
+**
+** Description     ioctl inteface
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_ioctl(userial_ioctl_op_t op, void *p_data)
+{
+    switch(op)
+    {
+        case USERIAL_OP_RXFLOW_ON:
+            if (userial_running)
+                send_wakeup_signal(USERIAL_RX_FLOW_ON);
+            break;
+
+        case USERIAL_OP_RXFLOW_OFF:
+            if (userial_running)
+                send_wakeup_signal(USERIAL_RX_FLOW_OFF);
+            break;
+
+        case USERIAL_OP_INIT:
+        default:
+            break;
+    }
+}
+
diff --git a/hci/src/userial_mct.c b/hci/src/userial_mct.c
new file mode 100644
index 0000000..5c33285
--- /dev/null
+++ b/hci/src/userial_mct.c
@@ -0,0 +1,439 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      userial_mct.c
+ *
+ *  Description:   Contains open/read/write/close functions on multi-channels
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bt_userial_mct"
+
+#include <utils/Log.h>
+#include <pthread.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <stdio.h>
+#include <sys/socket.h>
+#include "bt_hci_bdroid.h"
+#include "userial.h"
+#include "utils.h"
+#include "bt_vendor_lib.h"
+
+/******************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define USERIAL_DBG TRUE
+
+#ifndef USERIAL_DBG
+#define USERIAL_DBG FALSE
+#endif
+
+#if (USERIAL_DBG == TRUE)
+#define USERIALDBG(param, ...) {ALOGD(param, ## __VA_ARGS__);}
+#else
+#define USERIALDBG(param, ...) {}
+#endif
+
+#define MAX_SERIAL_PORT (USERIAL_PORT_3 + 1)
+
+enum {
+    USERIAL_RX_EXIT,
+    USERIAL_RX_FLOW_OFF,
+    USERIAL_RX_FLOW_ON
+};
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+
+extern bt_vendor_interface_t *bt_vnd_if;
+uint16_t hci_mct_receive_evt_msg(void);
+uint16_t hci_mct_receive_acl_msg(void);
+
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+typedef struct
+{
+    int             fd[CH_MAX];
+    uint8_t         port;
+    pthread_t       read_thread;
+    BUFFER_Q        rx_q;
+    HC_BT_HDR      *p_rx_hdr;
+} tUSERIAL_CB;
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static tUSERIAL_CB userial_cb;
+static volatile uint8_t userial_running = 0;
+
+/******************************************************************************
+**  Static functions
+******************************************************************************/
+
+/*****************************************************************************
+**   Socket signal functions to wake up userial_read_thread for termination
+**
+**   creating an unnamed pair of connected sockets
+**      - signal_fds[0]: join fd_set in select call of userial_read_thread
+**      - signal_fds[1]: trigger from userial_close
+*****************************************************************************/
+static int signal_fds[2]={0,1};
+static uint8_t rx_flow_on = TRUE;
+static inline int create_signal_fds(fd_set* set)
+{
+    if(signal_fds[0]==0 && socketpair(AF_UNIX, SOCK_STREAM, 0, signal_fds)<0)
+    {
+        ALOGE("create_signal_sockets:socketpair failed, errno: %d", errno);
+        return -1;
+    }
+    FD_SET(signal_fds[0], set);
+    return signal_fds[0];
+}
+static inline int send_wakeup_signal(char sig_cmd)
+{
+    return send(signal_fds[1], &sig_cmd, sizeof(sig_cmd), 0);
+}
+static inline char reset_signal()
+{
+    char sig_recv = -1;
+    recv(signal_fds[0], &sig_recv, sizeof(sig_recv), MSG_WAITALL);
+    return sig_recv;
+}
+static inline int is_signaled(fd_set* set)
+{
+    return FD_ISSET(signal_fds[0], set);
+}
+
+/*******************************************************************************
+**
+** Function        userial_evt_read_thread
+**
+** Description     The reading thread on EVT and ACL_IN channels
+**
+** Returns         void *
+**
+*******************************************************************************/
+static void *userial_read_thread(void *arg)
+{
+    fd_set input;
+    int n;
+    char reason = 0;
+
+    USERIALDBG("Entering userial_read_thread()");
+
+    rx_flow_on = TRUE;
+    userial_running = 1;
+
+    while (userial_running)
+    {
+        /* Initialize the input fd set */
+        FD_ZERO(&input);
+        if (rx_flow_on == TRUE)
+        {
+            FD_SET(userial_cb.fd[CH_EVT], &input);
+            FD_SET(userial_cb.fd[CH_ACL_IN], &input);
+        }
+
+        int fd_max = create_signal_fds(&input);
+        fd_max = (fd_max>userial_cb.fd[CH_EVT]) ? fd_max : userial_cb.fd[CH_EVT];
+        fd_max = (fd_max>userial_cb.fd[CH_ACL_IN]) ? fd_max : userial_cb.fd[CH_ACL_IN];
+
+        /* Do the select */
+        n = 0;
+        n = select(fd_max+1, &input, NULL, NULL, NULL);
+        if(is_signaled(&input))
+        {
+            reason = reset_signal();
+            if (reason == USERIAL_RX_EXIT)
+            {
+                ALOGI("exiting userial_read_thread");
+                userial_running = 0;
+                break;
+            }
+            else if (reason == USERIAL_RX_FLOW_OFF)
+            {
+                USERIALDBG("RX flow OFF");
+                rx_flow_on = FALSE;
+            }
+            else if (reason == USERIAL_RX_FLOW_ON)
+            {
+                USERIALDBG("RX flow ON");
+                rx_flow_on = TRUE;
+            }
+        }
+
+        if (n > 0)
+        {
+            /* We might have input */
+            if (FD_ISSET(userial_cb.fd[CH_EVT], &input))
+            {
+                hci_mct_receive_evt_msg();
+            }
+
+            if (FD_ISSET(userial_cb.fd[CH_ACL_IN], &input))
+            {
+                hci_mct_receive_acl_msg();
+            }
+        }
+        else if (n < 0)
+            ALOGW( "select() Failed");
+        else if (n == 0)
+            ALOGW( "Got a select() TIMEOUT");
+    } /* while */
+
+    userial_running = 0;
+    USERIALDBG("Leaving userial_evt_read_thread()");
+    pthread_exit(NULL);
+
+    return NULL;    // Compiler friendly
+}
+
+
+/*****************************************************************************
+**   Userial API Functions
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        userial_init
+**
+** Description     Initializes the userial driver
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_init(void)
+{
+    int idx;
+
+    USERIALDBG("userial_init");
+    memset(&userial_cb, 0, sizeof(tUSERIAL_CB));
+    for (idx=0; idx < CH_MAX; idx++)
+        userial_cb.fd[idx] = -1;
+    utils_queue_init(&(userial_cb.rx_q));
+    return TRUE;
+}
+
+
+/*******************************************************************************
+**
+** Function        userial_open
+**
+** Description     Open Bluetooth device with the port ID
+**
+** Returns         TRUE/FALSE
+**
+*******************************************************************************/
+uint8_t userial_open(uint8_t port)
+{
+    struct sched_param param;
+    int policy, result;
+    pthread_attr_t thread_attr;
+
+    USERIALDBG("userial_open(port:%d)", port);
+
+    if (userial_running)
+    {
+        /* Userial is open; close it first */
+        userial_close();
+        utils_delay(50);
+    }
+
+    if (port >= MAX_SERIAL_PORT)
+    {
+        ALOGE("Port > MAX_SERIAL_PORT");
+        return FALSE;
+    }
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+    {
+        result = bt_vnd_if->op(BT_VND_OP_USERIAL_OPEN, &userial_cb.fd);
+
+        if ((result != 2) && (result != 4))
+        {
+            ALOGE("userial_open: wrong numbers of open fd in vendor lib [%d]!",
+                    result);
+            ALOGE("userial_open: HCI MCT expects 2 or 4 open file descriptors");
+            bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+            return FALSE;
+        }
+    }
+    else
+    {
+        ALOGE("userial_open: missing vendor lib interface !!!");
+        ALOGE("userial_open: unable to open BT transport");
+        return FALSE;
+    }
+
+    ALOGI("CMD=%d, EVT=%d, ACL_Out=%d, ACL_In=%d", \
+        userial_cb.fd[CH_CMD], userial_cb.fd[CH_EVT], \
+        userial_cb.fd[CH_ACL_OUT], userial_cb.fd[CH_ACL_IN]);
+
+    if ((userial_cb.fd[CH_CMD] == -1) || (userial_cb.fd[CH_EVT] == -1) ||
+        (userial_cb.fd[CH_ACL_OUT] == -1) || (userial_cb.fd[CH_ACL_IN] == -1))
+    {
+        ALOGE("userial_open: failed to open BT transport");
+        bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+        return FALSE;
+    }
+
+    userial_cb.port = port;
+
+    /* Start listening thread */
+    pthread_attr_init(&thread_attr);
+
+    if (pthread_create(&(userial_cb.read_thread), &thread_attr, \
+                       userial_read_thread, NULL) != 0 )
+    {
+        ALOGE("pthread_create failed!");
+        bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+        return FALSE;
+    }
+
+    if(pthread_getschedparam(userial_cb.read_thread, &policy, &param)==0)
+    {
+        policy = BTHC_LINUX_BASE_POLICY;
+#if (BTHC_LINUX_BASE_POLICY!=SCHED_NORMAL)
+        param.sched_priority = BTHC_USERIAL_READ_THREAD_PRIORITY;
+#endif
+        result=pthread_setschedparam(userial_cb.read_thread,policy,&param);
+        if (result != 0)
+        {
+            ALOGW("userial_open: pthread_setschedparam failed (%s)", \
+                  strerror(result));
+        }
+    }
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function        userial_read
+**
+** Description     Read data from the userial channel
+**
+** Returns         Number of bytes actually read from the userial port and
+**                 copied into p_data.  This may be less than len.
+**
+*******************************************************************************/
+uint16_t  userial_read(uint16_t msg_id, uint8_t *p_buffer, uint16_t len)
+{
+    int ret = -1;
+    int ch_idx = (msg_id == MSG_HC_TO_STACK_HCI_EVT) ? CH_EVT : CH_ACL_IN;
+
+    ret = read(userial_cb.fd[ch_idx], p_buffer, (size_t)len);
+    if (ret <= 0)
+        ALOGW( "userial_read: read() returned %d!", ret);
+
+    return (uint16_t) ((ret >= 0) ? ret : 0);
+}
+
+/*******************************************************************************
+**
+** Function        userial_write
+**
+** Description     Write data to the userial port
+**
+** Returns         Number of bytes actually written to the userial port. This
+**                 may be less than len.
+**
+*******************************************************************************/
+uint16_t userial_write(uint16_t msg_id, uint8_t *p_data, uint16_t len)
+{
+    int ret, total = 0;
+    int ch_idx = (msg_id == MSG_STACK_TO_HC_HCI_CMD) ? CH_CMD : CH_ACL_OUT;
+
+    while(len != 0)
+    {
+        ret = write(userial_cb.fd[ch_idx], p_data+total, len);
+        total += ret;
+        len -= ret;
+    }
+
+    return ((uint16_t)total);
+}
+
+/*******************************************************************************
+**
+** Function        userial_close
+**
+** Description     Close the userial port
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_close(void)
+{
+    int idx, result;
+
+    USERIALDBG("userial_close");
+
+    if (userial_running)
+        send_wakeup_signal(USERIAL_RX_EXIT);
+
+    if ((result=pthread_join(userial_cb.read_thread, NULL)) < 0)
+        ALOGE( "pthread_join() FAILED result:%d", result);
+
+    /* Calling vendor-specific part */
+    if (bt_vnd_if)
+        bt_vnd_if->op(BT_VND_OP_USERIAL_CLOSE, NULL);
+
+    for (idx=0; idx < CH_MAX; idx++)
+        userial_cb.fd[idx] = -1;
+}
+
+/*******************************************************************************
+**
+** Function        userial_ioctl
+**
+** Description     ioctl inteface
+**
+** Returns         None
+**
+*******************************************************************************/
+void userial_ioctl(userial_ioctl_op_t op, void *p_data)
+{
+    switch(op)
+    {
+        case USERIAL_OP_RXFLOW_ON:
+            if (userial_running)
+                send_wakeup_signal(USERIAL_RX_FLOW_ON);
+            break;
+
+        case USERIAL_OP_RXFLOW_OFF:
+            if (userial_running)
+                send_wakeup_signal(USERIAL_RX_FLOW_OFF);
+            break;
+
+        case USERIAL_OP_INIT:
+        default:
+            break;
+    }
+}
+
diff --git a/hci/src/utils.c b/hci/src/utils.c
new file mode 100644
index 0000000..bfcf724
--- /dev/null
+++ b/hci/src/utils.c
@@ -0,0 +1,308 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      utils.c
+ *
+ *  Description:   Contains helper functions
+ *
+ ******************************************************************************/
+
+#include <errno.h>
+#include <pthread.h>
+#include <time.h>
+#include "bt_hci_bdroid.h"
+#include "utils.h"
+
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+static pthread_mutex_t utils_mutex;
+
+/*****************************************************************************
+**   UTILS INTERFACE FUNCTIONS
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        utils_init
+**
+** Description     Utils initialization
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_init (void)
+{
+    pthread_mutex_init(&utils_mutex, NULL);
+}
+
+/*******************************************************************************
+**
+** Function        utils_cleanup
+**
+** Description     Utils cleanup
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_cleanup (void)
+{
+}
+
+/*******************************************************************************
+**
+** Function        utils_queue_init
+**
+** Description     Initialize the given buffer queue
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_queue_init (BUFFER_Q *p_q)
+{
+    p_q->p_first = p_q->p_last = NULL;
+    p_q->count = 0;
+}
+
+/*******************************************************************************
+**
+** Function        utils_enqueue
+**
+** Description     Enqueue a buffer at the tail of the given queue
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_enqueue (BUFFER_Q *p_q, void *p_buf)
+{
+    HC_BUFFER_HDR_T    *p_hdr;
+
+    p_hdr = (HC_BUFFER_HDR_T *) ((uint8_t *) p_buf - BT_HC_BUFFER_HDR_SIZE);
+
+    pthread_mutex_lock(&utils_mutex);
+
+    if (p_q->p_last)
+    {
+        HC_BUFFER_HDR_T *p_last_hdr = \
+          (HC_BUFFER_HDR_T *)((uint8_t *)p_q->p_last - BT_HC_BUFFER_HDR_SIZE);
+
+        p_last_hdr->p_next = p_hdr;
+    }
+    else
+        p_q->p_first = p_buf;
+
+    p_q->p_last = p_buf;
+    p_q->count++;
+
+    p_hdr->p_next = NULL;
+
+    pthread_mutex_unlock(&utils_mutex);
+}
+/*******************************************************************************
+**
+** Function        utils_dequeue
+**
+** Description     Dequeues a buffer from the head of the given queue
+**
+** Returns         NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *utils_dequeue (BUFFER_Q *p_q)
+{
+    pthread_mutex_lock(&utils_mutex);
+    void* p_buf =  utils_dequeue_unlocked(p_q);
+    pthread_mutex_unlock(&utils_mutex);
+    return p_buf;
+}
+
+/*******************************************************************************
+**
+** Function        utils_dequeue_unlocked
+**
+** Description     Dequeues a buffer from the head of the given queue without lock
+**
+** Returns         NULL if queue is empty, else buffer
+**
+*******************************************************************************/
+void *utils_dequeue_unlocked (BUFFER_Q *p_q)
+{
+    HC_BUFFER_HDR_T    *p_hdr;
+
+
+    if (!p_q || !p_q->count)
+    {
+        return (NULL);
+    }
+
+    p_hdr=(HC_BUFFER_HDR_T *)((uint8_t *)p_q->p_first-BT_HC_BUFFER_HDR_SIZE);
+
+    if (p_hdr->p_next)
+        p_q->p_first = ((uint8_t *)p_hdr->p_next + BT_HC_BUFFER_HDR_SIZE);
+    else
+    {
+        p_q->p_first = NULL;
+        p_q->p_last  = NULL;
+    }
+
+    p_q->count--;
+
+    p_hdr->p_next = NULL;
+    return ((uint8_t *)p_hdr + BT_HC_BUFFER_HDR_SIZE);
+}
+
+/*******************************************************************************
+**
+** Function        utils_getnext
+**
+** Description     Return a pointer to the next buffer linked to the given
+**                 buffer
+**
+** Returns         NULL if the given buffer does not point to any next buffer,
+**                 else next buffer address
+**
+*******************************************************************************/
+void *utils_getnext (void *p_buf)
+{
+    HC_BUFFER_HDR_T    *p_hdr;
+
+    p_hdr = (HC_BUFFER_HDR_T *) ((uint8_t *) p_buf - BT_HC_BUFFER_HDR_SIZE);
+
+    if (p_hdr->p_next)
+        return ((uint8_t *)p_hdr->p_next + BT_HC_BUFFER_HDR_SIZE);
+    else
+        return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function        utils_remove_from_queue
+**
+** Description     Dequeue the given buffer from the middle of the given queue
+**
+** Returns         NULL if the given queue is empty, else the given buffer
+**
+*******************************************************************************/
+void *utils_remove_from_queue (BUFFER_Q *p_q, void *p_buf)
+{
+    pthread_mutex_lock(&utils_mutex);
+    p_buf = utils_remove_from_queue_unlocked(p_q, p_buf);
+    pthread_mutex_unlock(&utils_mutex);
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function        utils_remove_from_queue_unlocked
+**
+** Description     Dequeue the given buffer from the middle of the given queue
+**
+** Returns         NULL if the given queue is empty, else the given buffer
+**
+*******************************************************************************/
+void *utils_remove_from_queue_unlocked (BUFFER_Q *p_q, void *p_buf)
+{
+    HC_BUFFER_HDR_T    *p_prev;
+    HC_BUFFER_HDR_T    *p_buf_hdr;
+
+
+    if (p_buf == p_q->p_first)
+    {
+        return (utils_dequeue_unlocked (p_q));
+    }
+
+    p_buf_hdr = (HC_BUFFER_HDR_T *)((uint8_t *)p_buf - BT_HC_BUFFER_HDR_SIZE);
+    p_prev=(HC_BUFFER_HDR_T *)((uint8_t *)p_q->p_first-BT_HC_BUFFER_HDR_SIZE);
+
+    for ( ; p_prev; p_prev = p_prev->p_next)
+    {
+        /* If the previous points to this one, move the pointers around */
+        if (p_prev->p_next == p_buf_hdr)
+        {
+            p_prev->p_next = p_buf_hdr->p_next;
+
+            /* If we are removing the last guy in the queue, update p_last */
+            if (p_buf == p_q->p_last)
+                p_q->p_last = p_prev + 1;
+
+            /* One less in the queue */
+            p_q->count--;
+
+            /* The buffer is now unlinked */
+            p_buf_hdr->p_next = NULL;
+
+            return (p_buf);
+        }
+    }
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function        utils_delay
+**
+** Description     sleep unconditionally for timeout milliseconds
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_delay (uint32_t timeout)
+{
+    struct timespec delay;
+    int err;
+
+    delay.tv_sec = timeout / 1000;
+    delay.tv_nsec = 1000 * 1000 * (timeout%1000);
+
+    /* [u]sleep can't be used because it uses SIGALRM */
+    do {
+        err = nanosleep(&delay, &delay);
+    } while (err < 0 && errno ==EINTR);
+}
+
+/*******************************************************************************
+**
+** Function        utils_lock
+**
+** Description     application calls this function before entering critical
+**                 section
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_lock (void)
+{
+    pthread_mutex_lock(&utils_mutex);
+}
+
+/*******************************************************************************
+**
+** Function        utils_unlock
+**
+** Description     application calls this function when leaving critical
+**                 section
+**
+** Returns         None
+**
+*******************************************************************************/
+void utils_unlock (void)
+{
+    pthread_mutex_unlock(&utils_mutex);
+}
+
diff --git a/include/bt_target.h b/include/bt_target.h
new file mode 100644
index 0000000..05c4a35
--- /dev/null
+++ b/include/bt_target.h
@@ -0,0 +1,3828 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_TARGET_H
+#define BT_TARGET_H
+
+#ifndef BUILDCFG
+#define BUILDCFG
+#endif
+#include "data_types.h"
+
+
+#ifndef BTIF_HSAG_SERVICE_NAME
+#define BTIF_HSAG_SERVICE_NAME  ("Headset Gateway")
+#endif
+
+#ifndef BTIF_HFAG_SERVICE_NAME
+#define BTIF_HFAG_SERVICE_NAME  ("Handsfree Gateway")
+#endif
+
+
+#ifdef BUILDCFG
+
+#if !defined(HAS_BDROID_BUILDCFG) && !defined(HAS_NO_BDROID_BUILDCFG)
+#error "An Android.mk file did not include bdroid_CFLAGS and possibly not bdorid_C_INCLUDES"
+#endif
+
+#ifdef HAS_BDROID_BUILDCFG
+#include "bdroid_buildcfg.h"
+#endif
+
+#endif
+
+/* Include common GKI definitions used by this platform */
+#include "gki_target.h"
+
+#include "bt_types.h"   /* This must be defined AFTER buildcfg.h */
+#include "dyn_mem.h"    /* defines static and/or dynamic memory for components */
+
+
+//------------------Added from Bluedroid buildcfg.h---------------------
+#ifndef UNV_INCLUDED
+#define UNV_INCLUDED FALSE
+#endif
+
+#ifndef GATT_PTS
+#define GATT_PTS FALSE
+#endif
+
+#ifndef L2CAP_INCLUDED
+#define L2CAP_INCLUDED TRUE
+#endif
+
+#ifndef L2CAP_EXTFEA_SUPPORTED_MASK
+#define L2CAP_EXTFEA_SUPPORTED_MASK (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE | L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_FIXED_CHNLS)
+#endif
+
+#ifndef BTUI_OPS_FORMATS
+#define BTUI_OPS_FORMATS (BTA_OP_VCARD21_MASK | BTA_OP_ANY_MASK)
+#endif
+
+#ifndef BTA_RFC_MTU_SIZE
+#define BTA_RFC_MTU_SIZE (L2CAP_MTU_SIZE-L2CAP_MIN_OFFSET-RFCOMM_DATA_OVERHEAD)
+#endif
+
+#ifndef BTA_DUN_MTU
+#define BTA_DUN_MTU BTA_RFC_MTU_SIZE
+#endif
+
+#ifndef BTA_SPP_MTU
+#define BTA_SPP_MTU BTA_RFC_MTU_SIZE
+#endif
+
+#ifndef BTA_FAX_MTU
+#define BTA_FAX_MTU BTA_RFC_MTU_SIZE
+#endif
+
+#ifndef SDP_RAW_PDU_INCLUDED
+#define SDP_RAW_PDU_INCLUDED  TRUE
+#endif
+
+#ifndef GATTS_APPU_USE_GATT_TRACE
+#define GATTS_APPU_USE_GATT_TRACE FALSE
+#endif
+
+#ifndef SMP_HOST_ENCRYPT_INCLUDED
+#define SMP_HOST_ENCRYPT_INCLUDED FALSE
+#endif
+
+#ifndef SAP_INCLUDED
+#define SAP_INCLUDED FALSE
+#endif
+
+#ifndef SBC_NO_PCM_CPY_OPTION
+#define SBC_NO_PCM_CPY_OPTION FALSE
+#endif
+
+#ifndef SBC_IPAQ_OPT
+#define SBC_IPAQ_OPT FALSE
+#endif
+
+#ifndef SBC_IS_64_MULT_IN_QUANTIZER
+#define SBC_IS_64_MULT_IN_QUANTIZER FALSE
+#endif
+
+#ifndef BTA_INCLUDED
+#define BTA_INCLUDED TRUE
+#endif
+
+#ifndef BTA_AG_INCLUDED
+#define BTA_AG_INCLUDED  TRUE
+#endif
+
+#ifndef BTA_CT_INCLUDED
+#define BTA_CT_INCLUDED  FALSE
+#endif
+
+#ifndef BTA_CG_INCLUDED
+#define BTA_CG_INCLUDED  FALSE
+#endif
+
+#ifndef BTA_DG_INCLUDED
+#define BTA_DG_INCLUDED  FALSE
+#endif
+
+#ifndef BTA_FT_INCLUDED
+#define BTA_FT_INCLUDED FALSE
+#endif
+
+#ifndef BTA_OP_INCLUDED
+#define BTA_OP_INCLUDED FALSE
+#endif
+
+#ifndef BTA_PR_INCLUDED
+#define BTA_PR_INCLUDED FALSE
+#endif
+
+#ifndef BTA_SS_INCLUDED
+#define BTA_SS_INCLUDED FALSE
+#endif
+
+#ifndef BTA_DM_INCLUDED
+#define BTA_DM_INCLUDED TRUE
+#endif
+
+
+#ifndef BTA_DI_INCLUDED
+#define BTA_DI_INCLUDED FALSE
+#endif
+
+#ifndef BTA_BI_INCLUDED
+#define BTA_BI_INCLUDED FALSE
+#endif
+
+#ifndef BTA_SC_INCLUDED
+#define BTA_SC_INCLUDED FALSE
+#endif
+
+#ifndef BTA_PAN_INCLUDED
+#define BTA_PAN_INCLUDED TRUE
+#endif
+
+#ifndef BTA_FS_INCLUDED
+#define BTA_FS_INCLUDED TRUE
+#endif
+
+#ifndef BTA_AC_INCLUDED
+#define BTA_AC_INCLUDED FALSE
+#endif
+
+#ifndef BTA_HD_INCLUDED
+#define BTA_HD_INCLUDED FALSE
+#endif
+
+#ifndef BTA_HH_INCLUDED
+#define BTA_HH_INCLUDED TRUE
+#endif
+
+#ifndef BTA_HH_ROLE
+#define BTA_HH_ROLE BTA_MASTER_ROLE_PREF
+#endif
+
+#ifndef BTA_AR_INCLUDED
+#define BTA_AR_INCLUDED TRUE
+#endif
+
+#ifndef BTA_AV_INCLUDED
+#define BTA_AV_INCLUDED TRUE
+#endif
+
+#ifndef BTA_AV_VDP_INCLUDED
+#define BTA_AV_VDP_INCLUDED FALSE
+#endif
+
+#ifndef BTA_AVK_INCLUDED
+#define BTA_AVK_INCLUDED FALSE
+#endif
+
+#ifndef BTA_PBS_INCLUDED
+#define BTA_PBS_INCLUDED FALSE
+#endif
+
+#ifndef BTA_PBC_INCLUDED
+#define BTA_PBC_INCLUDED FALSE
+#endif
+
+#ifndef BTA_FM_INCLUDED
+#define BTA_FM_INCLUDED FALSE
+#endif
+
+#ifndef BTA_FM_DEBUG
+#define BTA_FM_DEBUG FALSE
+#endif
+
+#ifndef BTA_FMTX_INCLUDED
+#define BTA_FMTX_INCLUDED FALSE
+#endif
+
+#ifndef BTA_FMTX_DEBUG
+#define BTA_FMTX_DEBUG FALSE
+#endif
+
+#ifndef BTA_FMTX_FMRX_SWITCH_WORKAROUND
+#define BTA_FMTX_FMRX_SWITCH_WORKAROUND FALSE
+#endif
+
+#ifndef BTA_FMTX_US_FCC_RULES
+#define BTA_FMTX_US_FCC_RULES FALSE
+#endif
+
+#ifndef BTA_HS_INCLUDED
+#define BTA_HS_INCLUDED FALSE
+#endif
+
+#ifndef BTA_MSE_INCLUDED
+#define BTA_MSE_INCLUDED FALSE
+#endif
+
+#ifndef BTA_MCE_INCLUDED
+#define BTA_MCE_INCLUDED FALSE
+#endif
+
+#ifndef BTA_PLAYBACK_INCLUDED
+#define BTA_PLAYBACK_INCLUDED FALSE
+#endif
+
+#ifndef BTA_SSR_INCLUDED
+#define BTA_SSR_INCLUDED FALSE
+#endif
+
+#ifndef BTA_JV_INCLUDED
+#define BTA_JV_INCLUDED FALSE
+#endif
+
+#ifndef BTA_GATT_INCLUDED
+#define BTA_GATT_INCLUDED FALSE
+#endif
+
+#ifndef BTA_DISABLE_DELAY
+#define BTA_DISABLE_DELAY 200 /* in milliseconds */
+#endif
+
+#ifndef RPC_TRACE_ONLY
+#define RPC_TRACE_ONLY  FALSE
+#endif
+
+#ifndef ANDROID_APP_INCLUDED
+#define ANDROID_APP_INCLUDED  TRUE
+#endif
+
+#ifndef ANDROID_USE_LOGCAT
+#define ANDROID_USE_LOGCAT  TRUE
+#endif
+
+#ifndef LINUX_GKI_INCLUDED
+#define LINUX_GKI_INCLUDED  TRUE
+#endif
+
+#ifndef BTA_SYS_TIMER_PERIOD
+#define BTA_SYS_TIMER_PERIOD  100
+#endif
+
+#ifndef GKI_SHUTDOWN_EVT
+#define GKI_SHUTDOWN_EVT  APPL_EVT_7
+#endif
+
+#ifndef GKI_PTHREAD_JOINABLE
+#define GKI_PTHREAD_JOINABLE  TRUE
+#endif
+
+#ifndef LINUX_DRV_INCLUDED
+#define LINUX_DRV_INCLUDED  TRUE
+#endif
+
+#ifndef LINUX_OS
+#define LINUX_OS  TRUE
+#endif
+
+#ifndef BTM_APP_DEV_INIT
+#define BTM_APP_DEV_INIT  bte_main_post_reset_init
+#endif
+
+#ifndef SBC_FOR_EMBEDDED_LINUX
+#define SBC_FOR_EMBEDDED_LINUX TRUE
+#endif
+
+#ifndef BTA_DM_REMOTE_DEVICE_NAME_LENGTH
+#define BTA_DM_REMOTE_DEVICE_NAME_LENGTH 248
+#endif
+
+#ifndef AVDT_VERSION
+#define AVDT_VERSION  0x0102
+#endif
+
+#ifndef BTA_AG_AT_MAX_LEN
+#define BTA_AG_AT_MAX_LEN  512
+#endif
+
+#ifndef BTA_AVRCP_FF_RW_SUPPORT
+#define BTA_AVRCP_FF_RW_SUPPORT TRUE
+#endif
+
+#ifndef BTA_AG_SCO_PKT_TYPES
+#define BTA_AG_SCO_PKT_TYPES  (BTM_SCO_LINK_ONLY_MASK | BTM_SCO_PKT_TYPES_MASK_EV3 |  BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 | BTM_SCO_PKT_TYPES_MASK_NO_2_EV5 | BTM_SCO_PKT_TYPES_MASK_NO_3_EV5)
+#endif
+
+#ifndef BTA_AV_MAX_A2DP_MTU
+#define BTA_AV_MAX_A2DP_MTU  668
+#endif
+
+#ifndef BTA_AV_RET_TOUT
+#define BTA_AV_RET_TOUT 15
+#endif
+
+#ifndef PORCHE_PAIRING_CONFLICT
+#define PORCHE_PAIRING_CONFLICT  TRUE
+#endif
+
+#ifndef BTA_AV_CO_CP_SCMS_T
+#define BTA_AV_CO_CP_SCMS_T  FALSE
+#endif
+
+#ifndef AVDT_CONNECT_CP_ONLY
+#define AVDT_CONNECT_CP_ONLY  FALSE
+#endif
+
+#ifndef BT_TRACE_PROTOCOL
+#define BT_TRACE_PROTOCOL  TRUE
+#endif
+
+#ifndef BT_USE_TRACES
+#define BT_USE_TRACES  TRUE
+#endif
+
+#ifndef BT_TRACE_BTIF
+#define BT_TRACE_BTIF  TRUE
+#endif
+
+#ifndef BTTRC_INCLUDED
+#define BTTRC_INCLUDED  FALSE
+#endif
+
+#ifndef BT_TRACE_VERBOSE
+#define BT_TRACE_VERBOSE  FALSE
+#endif
+
+#ifndef BTTRC_PARSER_INCLUDED
+#define BTTRC_PARSER_INCLUDED  FALSE
+#endif
+
+#ifndef MAX_TRACE_RAM_SIZE
+#define MAX_TRACE_RAM_SIZE  10000
+#endif
+
+#ifndef OBX_INITIAL_TRACE_LEVEL
+#define OBX_INITIAL_TRACE_LEVEL  BT_TRACE_LEVEL_ERROR
+#endif
+
+#ifndef PBAP_ZERO_VCARD_IN_DB
+#define PBAP_ZERO_VCARD_IN_DB  FALSE
+#endif
+
+#ifndef BTA_DM_SDP_DB_SIZE
+#define BTA_DM_SDP_DB_SIZE  8000
+#endif
+
+#ifndef FTS_REJECT_INVALID_OBEX_SET_PATH_REQ
+#define FTS_REJECT_INVALID_OBEX_SET_PATH_REQ FALSE
+#endif
+
+#ifndef HL_INCLUDED
+#define HL_INCLUDED  TRUE
+#endif
+
+#ifndef NO_GKI_RUN_RETURN
+#define NO_GKI_RUN_RETURN  TRUE
+#endif
+
+#ifndef AG_VOICE_SETTINGS
+#define AG_VOICE_SETTINGS  HCI_DEFAULT_VOICE_SETTINGS
+#endif
+
+#ifndef BTIF_DM_OOB_TEST
+#define BTIF_DM_OOB_TEST  TRUE
+#endif
+//------------------End added from Bluedroid buildcfg.h---------------------
+
+
+
+/* #define BYPASS_AVDATATRACE */
+
+/******************************************************************************
+**
+** Platform-Specific
+**
+******************************************************************************/
+
+/* API macros for simulator */
+
+#define BTAPI
+
+#ifndef BTE_BSE_WRAPPER
+#ifdef  BTE_SIM_APP
+#undef  BTAPI
+#define BTAPI         __declspec(dllexport)
+#endif
+#endif
+
+#define BT_API          BTAPI
+#define BTU_API         BTAPI
+#define A2D_API         BTAPI
+#define VDP_API         BTAPI
+#define AVDT_API        BTAPI
+#define AVCT_API        BTAPI
+#define AVRC_API        BTAPI
+#define BIP_API         BTAPI
+#define BNEP_API        BTAPI
+#define BPP_API         BTAPI
+#define BTM_API         BTAPI
+#define CTP_API         BTAPI
+#define DUN_API         BTAPI
+#define FTP_API         BTAPI
+#define GAP_API         BTAPI
+#define GOEP_API        BTAPI
+#define HCI_API         BTAPI
+#define HCRP_API        BTAPI
+#define HID_API         BTAPI
+#define HFP_API         BTAPI
+#define HSP2_API        BTAPI
+#define ICP_API         BTAPI
+#define L2C_API         BTAPI
+#define OBX_API         BTAPI
+#define OPP_API         BTAPI
+#define PAN_API         BTAPI
+#define RFC_API         BTAPI
+#define RPC_API         BTAPI
+#define SDP_API         BTAPI
+#define SPP_API         BTAPI
+#define TCS_API         BTAPI
+#define XML_API         BTAPI
+#define BTA_API         BTAPI
+#define SBC_API         BTAPI
+#define MCE_API         BTAPI
+#define MCA_API         BTAPI
+#define GATT_API        BTAPI
+#define SMP_API         BTAPI
+
+
+/******************************************************************************
+**
+** GKI Buffer Pools
+**
+******************************************************************************/
+
+/* Receives HCI events from the lower-layer. */
+#ifndef HCI_CMD_POOL_ID
+#define HCI_CMD_POOL_ID             GKI_POOL_ID_2
+#endif
+
+#ifndef HCI_CMD_POOL_BUF_SIZE
+#define HCI_CMD_POOL_BUF_SIZE       GKI_BUF2_SIZE
+#endif
+
+/* Receives ACL data packets from thelower-layer. */
+#ifndef HCI_ACL_POOL_ID
+#define HCI_ACL_POOL_ID             GKI_POOL_ID_3
+#endif
+
+#ifndef HCI_ACL_POOL_BUF_SIZE
+#define HCI_ACL_POOL_BUF_SIZE       GKI_BUF3_SIZE
+#endif
+
+/* Maximum number of buffers available for ACL receive data. */
+#ifndef HCI_ACL_BUF_MAX
+#define HCI_ACL_BUF_MAX             GKI_BUF3_MAX
+#endif
+
+/* Receives SCO data packets from the lower-layer. */
+#ifndef HCI_SCO_POOL_ID
+#define HCI_SCO_POOL_ID             GKI_POOL_ID_6
+#endif
+
+/* Not used. */
+#ifndef HCI_DATA_DESCR_POOL_ID
+#define HCI_DATA_DESCR_POOL_ID      GKI_POOL_ID_0
+#endif
+
+/* Sends SDP data packets. */
+#ifndef SDP_POOL_ID
+#define SDP_POOL_ID                 3
+#endif
+
+/* Sends RFCOMM command packets. */
+#ifndef RFCOMM_CMD_POOL_ID
+#define RFCOMM_CMD_POOL_ID          GKI_POOL_ID_2
+#endif
+
+#ifndef RFCOMM_CMD_POOL_BUF_SIZE
+#define RFCOMM_CMD_POOL_BUF_SIZE    GKI_BUF2_SIZE
+#endif
+
+/* Sends RFCOMM data packets. */
+#ifndef RFCOMM_DATA_POOL_ID
+#define RFCOMM_DATA_POOL_ID         GKI_POOL_ID_3
+#endif
+
+#ifndef RFCOMM_DATA_POOL_BUF_SIZE
+#define RFCOMM_DATA_POOL_BUF_SIZE   GKI_BUF3_SIZE
+#endif
+
+/* Sends L2CAP packets to the peer and HCI messages to the controller. */
+#ifndef L2CAP_CMD_POOL_ID
+#define L2CAP_CMD_POOL_ID           GKI_POOL_ID_2
+#endif
+
+/* Sends L2CAP segmented packets in ERTM mode */
+#ifndef L2CAP_FCR_TX_POOL_ID
+#define L2CAP_FCR_TX_POOL_ID        HCI_ACL_POOL_ID
+#endif
+
+/* Receives L2CAP segmented packets in ERTM mode */
+#ifndef L2CAP_FCR_RX_POOL_ID
+#define L2CAP_FCR_RX_POOL_ID        HCI_ACL_POOL_ID
+#endif
+
+/* Used by BTM when it sends HCI commands to the controller. */
+#ifndef BTM_CMD_POOL_ID
+#define BTM_CMD_POOL_ID             GKI_POOL_ID_2
+#endif
+
+/* Sends TCS messages. */
+#ifndef TCS_MSG_POOL_ID
+#define TCS_MSG_POOL_ID             GKI_POOL_ID_2
+#endif
+
+#ifndef OBX_CMD_POOL_SIZE
+#define OBX_CMD_POOL_SIZE           GKI_BUF2_SIZE
+#endif
+
+#ifndef OBX_LRG_DATA_POOL_SIZE
+#define OBX_LRG_DATA_POOL_SIZE      GKI_BUF4_SIZE
+#endif
+
+#ifndef OBX_LRG_DATA_POOL_ID
+#define OBX_LRG_DATA_POOL_ID        GKI_POOL_ID_4
+#endif
+
+/* Used for CTP discovery database. */
+#ifndef CTP_SDP_DB_POOL_ID
+#define CTP_SDP_DB_POOL_ID          GKI_POOL_ID_3
+#endif
+
+/* Used for CTP data exchange feature. */
+#ifndef CTP_DATA_EXCHG_POOL_ID
+#define CTP_DATA_EXCHG_POOL_ID      GKI_POOL_ID_2
+#endif
+
+/* Used to send data to L2CAP. */
+#ifndef GAP_DATA_POOL_ID
+#define GAP_DATA_POOL_ID            GKI_POOL_ID_3
+#endif
+
+/* Used for SPP inquiry and discovery databases. */
+#ifndef SPP_DB_POOL_ID
+#define SPP_DB_POOL_ID              GKI_POOL_ID_3
+#endif
+
+#ifndef SPP_DB_SIZE
+#define SPP_DB_SIZE                 GKI_BUF3_SIZE
+#endif
+
+/* HCRP protocol and internal commands. */
+#ifndef HCRP_CMD_POOL_ID
+#define HCRP_CMD_POOL_ID            GKI_POOL_ID_2
+#endif
+
+#ifndef HCRP_CMD_POOL_SIZE
+#define HCRP_CMD_POOL_SIZE          GKI_BUF2_SIZE
+#endif
+
+#ifndef BIP_EVT_POOL_SIZE
+#define BIP_EVT_POOL_SIZE           GKI_BUF3_SIZE
+#endif
+
+#ifndef BIP_DB_SIZE
+#define BIP_DB_SIZE                 GKI_BUF3_SIZE
+#endif
+
+
+/* BNEP data and protocol messages. */
+#ifndef BNEP_POOL_ID
+#define BNEP_POOL_ID                GKI_POOL_ID_3
+#endif
+
+/* RPC pool for temporary trace message buffers. */
+#ifndef RPC_SCRATCH_POOL_ID
+#define RPC_SCRATCH_POOL_ID         GKI_POOL_ID_2
+#endif
+
+/* RPC scratch buffer size (not related to RPC_SCRATCH_POOL_ID) */
+#ifndef RPC_SCRATCH_BUF_SIZE
+#define RPC_SCRATCH_BUF_SIZE        GKI_BUF3_SIZE
+#endif
+
+/* RPC pool for protocol messages */
+#ifndef RPC_MSG_POOL_ID
+#define RPC_MSG_POOL_ID             GKI_POOL_ID_3
+#endif
+
+#ifndef RPC_MSG_POOL_SIZE
+#define RPC_MSG_POOL_SIZE           GKI_BUF3_SIZE
+#endif
+
+/* AVDTP pool for protocol messages */
+#ifndef AVDT_CMD_POOL_ID
+#define AVDT_CMD_POOL_ID            GKI_POOL_ID_2
+#endif
+
+/* AVDTP pool size for media packets in case of fragmentation */
+#ifndef AVDT_DATA_POOL_SIZE
+#define AVDT_DATA_POOL_SIZE         GKI_BUF3_SIZE
+#endif
+
+#ifndef PAN_POOL_ID
+#define PAN_POOL_ID                 GKI_POOL_ID_3
+#endif
+
+/* UNV pool for read/write serialization */
+#ifndef UNV_MSG_POOL_ID
+#define UNV_MSG_POOL_ID             GKI_POOL_ID_2
+#endif
+
+#ifndef UNV_MSG_POOL_SIZE
+#define UNV_MSG_POOL_SIZE           GKI_BUF2_SIZE
+#endif
+
+/* AVCTP pool for protocol messages */
+#ifndef AVCT_CMD_POOL_ID
+#define AVCT_CMD_POOL_ID            GKI_POOL_ID_1
+#endif
+
+#ifndef AVCT_META_CMD_POOL_ID
+#define AVCT_META_CMD_POOL_ID       GKI_POOL_ID_2
+#endif
+
+/* AVRCP pool for protocol messages */
+#ifndef AVRC_CMD_POOL_ID
+#define AVRC_CMD_POOL_ID            GKI_POOL_ID_1
+#endif
+
+/* AVRCP pool size for protocol messages */
+#ifndef AVRC_CMD_POOL_SIZE
+#define AVRC_CMD_POOL_SIZE          GKI_BUF1_SIZE
+#endif
+
+/* AVRCP Metadata pool for protocol messages */
+#ifndef AVRC_META_CMD_POOL_ID
+#define AVRC_META_CMD_POOL_ID       GKI_POOL_ID_2
+#endif
+
+/* AVRCP Metadata pool size for protocol messages */
+#ifndef AVRC_META_CMD_POOL_SIZE
+#define AVRC_META_CMD_POOL_SIZE     GKI_BUF2_SIZE
+#endif
+
+
+/* AVRCP buffer size for browsing channel messages */
+#ifndef AVRC_BROWSE_POOL_SIZE
+#define AVRC_BROWSE_POOL_SIZE     GKI_MAX_BUF_SIZE
+#endif
+
+/*  HDP buffer size for the Pulse Oximeter  */
+#ifndef BTA_HL_LRG_DATA_POOL_SIZE
+#define BTA_HL_LRG_DATA_POOL_SIZE      GKI_BUF7_SIZE
+#endif
+
+#ifndef BTA_HL_LRG_DATA_POOL_ID
+#define BTA_HL_LRG_DATA_POOL_ID        GKI_POOL_ID_7
+#endif
+
+/* GATT Server Database pool ID */
+#ifndef GATT_DB_POOL_ID
+#define GATT_DB_POOL_ID                 GKI_POOL_ID_8
+#endif
+
+/******************************************************************************
+**
+** Lower Layer Interface
+**
+******************************************************************************/
+
+/* Sends ACL data received over HCI to the upper stack. */
+#ifndef HCI_ACL_DATA_TO_UPPER
+#define HCI_ACL_DATA_TO_UPPER(p)    {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_ACL; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* Sends SCO data received over HCI to the upper stack. */
+#ifndef HCI_SCO_DATA_TO_UPPER
+#define HCI_SCO_DATA_TO_UPPER(p)    {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_SCO; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* Sends an HCI event received over HCI to theupper stack. */
+#ifndef HCI_EVT_TO_UPPER
+#define HCI_EVT_TO_UPPER(p)         {((BT_HDR *)p)->event = BT_EVT_TO_BTU_HCI_EVT; GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, p);}
+#endif
+
+/* Macro for allocating buffer for HCI commands */
+#ifndef HCI_GET_CMD_BUF
+#if (!defined(HCI_USE_VARIABLE_SIZE_CMD_BUF) || (HCI_USE_VARIABLE_SIZE_CMD_BUF == FALSE))
+/* Allocate fixed-size buffer from HCI_CMD_POOL (default case) */
+#define HCI_GET_CMD_BUF(paramlen)    ((BT_HDR *)GKI_getpoolbuf (HCI_CMD_POOL_ID))
+#else
+/* Allocate smallest possible buffer (for platforms with limited RAM) */
+#define HCI_GET_CMD_BUF(paramlen)    ((BT_HDR *)GKI_getbuf ((UINT16)(BT_HDR_SIZE + HCIC_PREAMBLE_SIZE + (paramlen))))
+#endif
+#endif  /* HCI_GET_CMD_BUF */
+
+/******************************************************************************
+**
+** HCI Services (H4)
+**
+******************************************************************************/
+#ifndef HCISU_H4_INCLUDED
+#define HCISU_H4_INCLUDED               TRUE
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+BT_API extern void bte_main_hci_send (BT_HDR *p_msg, UINT16 event);
+#if (HCISU_H4_INCLUDED == TRUE)
+BT_API extern void bte_main_lpm_allow_bt_device_sleep(void);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Sends ACL data received from the upper stack to the BD/EDR HCI transport. */
+#ifndef HCI_ACL_DATA_TO_LOWER
+#define HCI_ACL_DATA_TO_LOWER(p)    bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_ACL);
+#endif
+
+#ifndef HCI_BLE_ACL_DATA_TO_LOWER
+#define HCI_BLE_ACL_DATA_TO_LOWER(p)    bte_main_hci_send((BT_HDR *)(p), (UINT16)(BT_EVT_TO_LM_HCI_ACL|LOCAL_BLE_CONTROLLER_ID));
+#endif
+
+/* Sends SCO data received from the upper stack to the HCI transport. */
+#ifndef HCI_SCO_DATA_TO_LOWER
+#define HCI_SCO_DATA_TO_LOWER(p)    bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_SCO);
+#endif
+
+/* Sends an HCI command received from the upper stack to the BD/EDR HCI transport. */
+#ifndef HCI_CMD_TO_LOWER
+#define HCI_CMD_TO_LOWER(p)         bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_HCI_CMD);
+#endif
+
+/* Sends an LM Diagnosic command received from the upper stack to the HCI transport. */
+#ifndef HCI_LM_DIAG_TO_LOWER
+#define HCI_LM_DIAG_TO_LOWER(p)     bte_main_hci_send((BT_HDR *)(p), BT_EVT_TO_LM_DIAG);
+#endif
+
+/* Send HCISU a message to allow BT sleep */
+#ifndef HCI_LP_ALLOW_BT_DEVICE_SLEEP
+#define HCI_LP_ALLOW_BT_DEVICE_SLEEP()       bte_main_lpm_allow_bt_device_sleep()
+#endif
+
+/* If nonzero, the upper-layer sends at most this number of HCI commands to the lower-layer. */
+#ifndef HCI_MAX_SIMUL_CMDS
+#define HCI_MAX_SIMUL_CMDS          0
+#endif
+
+/* Timeout for receiving response to HCI command */
+#ifndef BTU_CMD_CMPL_TIMEOUT
+#define BTU_CMD_CMPL_TIMEOUT        8
+#endif
+
+/* If TRUE, BTU task will check HCISU again when HCI command timer expires */
+#ifndef BTU_CMD_CMPL_TOUT_DOUBLE_CHECK
+#define BTU_CMD_CMPL_TOUT_DOUBLE_CHECK      FALSE
+#endif
+
+/* Use 2 second for low-resolution systems, override to 1 for high-resolution systems */
+#ifndef BT_1SEC_TIMEOUT
+#define BT_1SEC_TIMEOUT             (2)
+#endif
+
+/* Quick Timer */
+/* if L2CAP_FCR_INCLUDED is TRUE then it should have 100 millisecond resolution */
+/* if none of them is included then QUICK_TIMER_TICKS_PER_SEC is set to 0 to exclude quick timer */
+#ifndef QUICK_TIMER_TICKS_PER_SEC
+#define QUICK_TIMER_TICKS_PER_SEC   10       /* 10ms timer */
+#endif
+
+/******************************************************************************
+**
+** BTM
+**
+******************************************************************************/
+/* if set to TRUE, stack will automatically send an HCI reset at start-up. To be
+set to FALSE for advanced start-up / shut-down procedures using USER_HW_ENABLE_API
+and USER_HW_DISABLE_API macros */
+#ifndef BTM_AUTOMATIC_HCI_RESET
+#define BTM_AUTOMATIC_HCI_RESET      FALSE
+#endif
+
+/* Include BTM Discovery database and code. */
+#ifndef BTM_DISCOVERY_INCLUDED
+#define BTM_DISCOVERY_INCLUDED      TRUE
+#endif
+
+/* Include inquiry code. */
+#ifndef BTM_INQUIRY_INCLUDED
+#define BTM_INQUIRY_INCLUDED        TRUE
+#endif
+
+/* Cancel Inquiry on incoming SSP */
+#ifndef BTM_NO_SSP_ON_INQUIRY
+#define BTM_NO_SSP_ON_INQUIRY       FALSE
+#endif
+
+/* Include periodic inquiry code (used when BTM_INQUIRY_INCLUDED is TRUE). */
+#ifndef BTM_PERIODIC_INQ_INCLUDED
+#define BTM_PERIODIC_INQ_INCLUDED   TRUE
+#endif
+
+/* Include security authorization code */
+#ifndef BTM_AUTHORIZATION_INCLUDED
+#define BTM_AUTHORIZATION_INCLUDED  TRUE
+#endif
+
+/* Includes SCO if TRUE */
+#ifndef BTM_SCO_INCLUDED
+#define BTM_SCO_INCLUDED            TRUE       /* TRUE includes SCO code */
+#endif
+
+/* Includes SCO if TRUE */
+#ifndef BTM_SCO_HCI_INCLUDED
+#define BTM_SCO_HCI_INCLUDED            FALSE       /* TRUE includes SCO over HCI code */
+#endif
+
+/* Includes WBS if TRUE */
+#ifndef BTM_WBS_INCLUDED
+#define BTM_WBS_INCLUDED            FALSE       /* TRUE includes WBS code */
+#endif
+
+/* Includes PCM2 support if TRUE */
+#ifndef BTM_PCM2_INCLUDED
+#define BTM_PCM2_INCLUDED           FALSE
+#endif
+
+/*  This is used to work around a controller bug that doesn't like Disconnect
+**  issued while there is a role switch in progress
+*/
+#ifndef BTM_DISC_DURING_RS
+#define BTM_DISC_DURING_RS TRUE
+#endif
+
+/**************************
+** Initial SCO TX credit
+*************************/
+/* max TX SCO data packet size */
+#ifndef BTM_SCO_DATA_SIZE_MAX
+#define BTM_SCO_DATA_SIZE_MAX       240
+#endif
+
+/* maximum BTM buffering capacity */
+#ifndef BTM_SCO_MAX_BUF_CAP
+#define BTM_SCO_MAX_BUF_CAP     (BTM_SCO_INIT_XMIT_CREDIT * 4)
+#endif
+
+/* The size in bytes of the BTM inquiry database. */
+#ifndef BTM_INQ_DB_SIZE
+#define BTM_INQ_DB_SIZE             40
+#endif
+
+/* This is set to enable automatic periodic inquiry at startup. */
+#ifndef BTM_ENABLE_AUTO_INQUIRY
+#define BTM_ENABLE_AUTO_INQUIRY     FALSE
+#endif
+
+/* This is set to always try to acquire the remote device name. */
+#ifndef BTM_INQ_GET_REMOTE_NAME
+#define BTM_INQ_GET_REMOTE_NAME     FALSE
+#endif
+
+/* The inquiry duration in 1.28 second units when auto inquiry is enabled. */
+#ifndef BTM_DEFAULT_INQ_DUR
+#define BTM_DEFAULT_INQ_DUR         5
+#endif
+
+/* The inquiry mode when auto inquiry is enabled. */
+#ifndef BTM_DEFAULT_INQ_MODE
+#define BTM_DEFAULT_INQ_MODE        BTM_GENERAL_INQUIRY
+#endif
+
+/* The default periodic inquiry maximum delay when auto inquiry is enabled, in 1.28 second units. */
+#ifndef BTM_DEFAULT_INQ_MAX_DELAY
+#define BTM_DEFAULT_INQ_MAX_DELAY   30
+#endif
+
+/* The default periodic inquiry minimum delay when auto inquiry is enabled, in 1.28 second units. */
+#ifndef BTM_DEFAULT_INQ_MIN_DELAY
+#define BTM_DEFAULT_INQ_MIN_DELAY   20
+#endif
+
+/* The maximum age of entries in inquiry database in seconds ('0' disables feature). */
+#ifndef BTM_INQ_MAX_AGE
+#define BTM_INQ_MAX_AGE             0
+#endif
+
+/* The maximum age of entries in inquiry database based on inquiry response failure ('0' disables feature). */
+#ifndef BTM_INQ_AGE_BY_COUNT
+#define BTM_INQ_AGE_BY_COUNT        0
+#endif
+
+/* TRUE if controller does not support inquiry event filtering. */
+#ifndef BTM_BYPASS_EVENT_FILTERING
+#define BTM_BYPASS_EVENT_FILTERING  FALSE
+#endif
+
+/* TRUE if inquiry filtering is desired from BTM. */
+#ifndef BTM_USE_INQ_RESULTS_FILTER
+#define BTM_USE_INQ_RESULTS_FILTER  TRUE
+#endif
+
+/* The default scan mode */
+#ifndef BTM_DEFAULT_SCAN_TYPE
+#define BTM_DEFAULT_SCAN_TYPE       BTM_SCAN_TYPE_INTERLACED
+#endif
+
+/* Should connections to unknown devices be allowed when not discoverable? */
+#ifndef BTM_ALLOW_CONN_IF_NONDISCOVER
+#define BTM_ALLOW_CONN_IF_NONDISCOVER   TRUE
+#endif
+
+/* When connectable mode is set to TRUE, the device will respond to paging. */
+#ifndef BTM_IS_CONNECTABLE
+#define BTM_IS_CONNECTABLE          FALSE
+#endif
+
+/* Sets the Page_Scan_Window:  the length of time that the device is performing a page scan. */
+#ifndef BTM_DEFAULT_CONN_WINDOW
+#define BTM_DEFAULT_CONN_WINDOW     0x0012
+#endif
+
+/* Sets the Page_Scan_Activity:  the interval between the start of two consecutive page scans. */
+#ifndef BTM_DEFAULT_CONN_INTERVAL
+#define BTM_DEFAULT_CONN_INTERVAL   0x0800
+#endif
+
+/* This is set to automatically perform inquiry scan on startup. */
+#ifndef BTM_IS_DISCOVERABLE
+#define BTM_IS_DISCOVERABLE         FALSE
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the discovery mode. */
+#ifndef BTM_DEFAULT_DISC_MODE
+#define BTM_DEFAULT_DISC_MODE       BTM_GENERAL_DISCOVERABLE
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the inquiry scan window. */
+#ifndef BTM_DEFAULT_DISC_WINDOW
+#define BTM_DEFAULT_DISC_WINDOW     0x0012
+#endif
+
+/* When automatic inquiry scan is enabled, this sets the inquiry scan interval. */
+#ifndef BTM_DEFAULT_DISC_INTERVAL
+#define BTM_DEFAULT_DISC_INTERVAL   0x0800
+#endif
+
+/* Sets the period, in seconds, to automatically perform service discovery. */
+#ifndef BTM_AUTO_DISCOVERY_PERIOD
+#define BTM_AUTO_DISCOVERY_PERIOD   0
+#endif
+
+/* The size in bytes of the BTM discovery database (if discovery is included). */
+#ifndef BTM_DISCOVERY_DB_SIZE
+#define BTM_DISCOVERY_DB_SIZE       4000
+#endif
+
+/* Number of milliseconds to delay BTU task startup upon device initialization. */
+#ifndef BTU_STARTUP_DELAY
+#define BTU_STARTUP_DELAY           0
+#endif
+
+/* Whether BTA is included in BTU task. */
+#ifndef BTU_BTA_INCLUDED
+#define BTU_BTA_INCLUDED            TRUE
+#endif
+
+/* Number of seconds to wait to send an HCI Reset command upon device initialization. */
+#ifndef BTM_FIRST_RESET_DELAY
+#define BTM_FIRST_RESET_DELAY       0
+#endif
+
+/* The number of seconds to wait for controller module to reset after issuing an HCI Reset command. */
+#ifndef BTM_AFTER_RESET_TIMEOUT
+#define BTM_AFTER_RESET_TIMEOUT     0
+#endif
+
+/* Default class of device
+* {SERVICE_CLASS, MAJOR_CLASS, MINOR_CLASS}
+*
+* SERVICE_CLASS:0x5A (Bit17 -Networking,Bit19 - Capturing,Bit20 -Object Transfer,Bit22 -Telephony)
+* MAJOR_CLASS:0x02 - PHONE
+* MINOR_CLASS:0x0C - SMART_PHONE
+*
+*/
+#ifndef BTA_DM_COD
+#define BTA_DM_COD {0x5A, 0x02, 0x0C}
+#endif
+
+/* The number of SCO links. */
+#ifndef BTM_MAX_SCO_LINKS
+#define BTM_MAX_SCO_LINKS           2
+#endif
+
+/* The preferred type of SCO links (2-eSCO, 0-SCO). */
+#ifndef BTM_DEFAULT_SCO_MODE
+#define BTM_DEFAULT_SCO_MODE        2
+#endif
+
+/* The number of security records for peer devices. */
+#ifndef BTM_SEC_MAX_DEVICE_RECORDS
+#define BTM_SEC_MAX_DEVICE_RECORDS  100
+#endif
+
+/* The number of security records for services. */
+#ifndef BTM_SEC_MAX_SERVICE_RECORDS
+#define BTM_SEC_MAX_SERVICE_RECORDS 32
+#endif
+
+/* If True, force a retrieval of remote device name for each bond in case it's changed */
+#ifndef BTM_SEC_FORCE_RNR_FOR_DBOND
+#define BTM_SEC_FORCE_RNR_FOR_DBOND  FALSE
+#endif
+
+/* Maximum device name length used in btm database. */
+#ifndef BTM_MAX_REM_BD_NAME_LEN
+#define BTM_MAX_REM_BD_NAME_LEN     248
+#endif
+
+/* Maximum local device name length stored btm database.
+  '0' disables storage of the local name in BTM */
+#ifndef BTM_MAX_LOC_BD_NAME_LEN
+#define BTM_MAX_LOC_BD_NAME_LEN     248
+#endif
+
+/* TRUE if default string is used, FALSE if device name is set in the application */
+#ifndef BTM_USE_DEF_LOCAL_NAME
+#define BTM_USE_DEF_LOCAL_NAME      TRUE
+#endif
+
+/* Fixed Default String (Ignored if BTM_USE_DEF_LOCAL_NAME is FALSE) */
+#ifndef BTM_DEF_LOCAL_NAME
+#define BTM_DEF_LOCAL_NAME      ""
+#endif
+
+/* Maximum service name stored with security authorization (0 if not needed) */
+#ifndef BTM_SEC_SERVICE_NAME_LEN
+#define BTM_SEC_SERVICE_NAME_LEN    BT_MAX_SERVICE_NAME_LEN
+#endif
+
+/* Maximum number of pending security callback */
+#ifndef BTM_SEC_MAX_CALLBACKS
+#define BTM_SEC_MAX_CALLBACKS       7
+#endif
+
+/* Maximum length of the service name. */
+#ifndef BT_MAX_SERVICE_NAME_LEN
+#define BT_MAX_SERVICE_NAME_LEN     21
+#endif
+
+/* ACL buffer size in HCI Host Buffer Size command. */
+#ifndef BTM_ACL_BUF_SIZE
+#define BTM_ACL_BUF_SIZE            0
+#endif
+
+/* This is set to use the BTM power manager. */
+#ifndef BTM_PWR_MGR_INCLUDED
+#define BTM_PWR_MGR_INCLUDED        TRUE
+#endif
+
+/* The maximum number of clients that can register with the power manager. */
+#ifndef BTM_MAX_PM_RECORDS
+#define BTM_MAX_PM_RECORDS          2
+#endif
+
+/* This is set to show debug trace messages for the power manager. */
+#ifndef BTM_PM_DEBUG
+#define BTM_PM_DEBUG                FALSE
+#endif
+
+/* This is set to TRUE if link is to be unparked due to BTM_CreateSCO API. */
+#ifndef BTM_SCO_WAKE_PARKED_LINK
+#define BTM_SCO_WAKE_PARKED_LINK    TRUE
+#endif
+
+/* May be set to the the name of a function used for vendor specific chip initialization */
+#ifndef BTM_APP_DEV_INIT
+/* #define BTM_APP_DEV_INIT         myInitFunction() */
+#endif
+
+/* This is set to TRUE if the busy level change event is desired. (replace ACL change event) */
+#ifndef BTM_BUSY_LEVEL_CHANGE_INCLUDED
+#define BTM_BUSY_LEVEL_CHANGE_INCLUDED  TRUE
+#endif
+
+/* If the user does not respond to security process requests within this many seconds,
+ * a negative response would be sent automatically.
+ * It's recommended to use a value between 30 and OBX_TIMEOUT_VALUE
+ * 30 is LMP response timeout value */
+#ifndef BTM_SEC_TIMEOUT_VALUE
+#define BTM_SEC_TIMEOUT_VALUE           35
+#endif
+
+/* Maximum number of callbacks that can be registered using BTM_RegisterForVSEvents */
+#ifndef BTM_MAX_VSE_CALLBACKS
+#define BTM_MAX_VSE_CALLBACKS           3
+#endif
+
+/* Number of streams for dual stack */
+#ifndef BTM_SYNC_INFO_NUM_STR
+#define BTM_SYNC_INFO_NUM_STR           2
+#endif
+
+/* Number of streams for dual stack in BT Controller */
+#ifndef BTM_SYNC_INFO_NUM_STR_BTC
+#define BTM_SYNC_INFO_NUM_STR_BTC       2
+#endif
+
+/******************************************
+**    Lisbon Features
+*******************************************/
+/* This is set to TRUE if the server Extended Inquiry Response feature is desired. */
+/* server sends EIR to client */
+#ifndef BTM_EIR_SERVER_INCLUDED
+#define BTM_EIR_SERVER_INCLUDED         TRUE
+#endif
+
+/* This is set to TRUE if the client Extended Inquiry Response feature is desired. */
+/* client inquiry to server */
+#ifndef BTM_EIR_CLIENT_INCLUDED
+#define BTM_EIR_CLIENT_INCLUDED         TRUE
+#endif
+
+/* This is set to TRUE if the FEC is required for EIR packet. */
+#ifndef BTM_EIR_DEFAULT_FEC_REQUIRED
+#define BTM_EIR_DEFAULT_FEC_REQUIRED    TRUE
+#endif
+
+/* User defined UUID look up table */
+#ifndef BTM_EIR_UUID_LKUP_TBL
+#endif
+
+/* The IO capability of the local device (for Simple Pairing) */
+#ifndef BTM_LOCAL_IO_CAPS
+#define BTM_LOCAL_IO_CAPS               BTM_IO_CAP_IO
+#endif
+
+/* The default MITM Protection Requirement (for Simple Pairing)
+ * Possible values are BTM_AUTH_SP_YES or BTM_AUTH_SP_NO */
+#ifndef BTM_DEFAULT_AUTH_REQ
+#define BTM_DEFAULT_AUTH_REQ            BTM_AUTH_SP_NO
+#endif
+
+/* The default MITM Protection Requirement for dedicated bonding using Simple Pairing
+ * Possible values are BTM_AUTH_AP_YES or BTM_AUTH_AP_NO */
+#ifndef BTM_DEFAULT_DD_AUTH_REQ
+#define BTM_DEFAULT_DD_AUTH_REQ            BTM_AUTH_AP_YES
+#endif
+
+/* Include Out-of-Band implementation for Simple Pairing */
+#ifndef BTM_OOB_INCLUDED
+#define BTM_OOB_INCLUDED                TRUE
+#endif
+
+/* TRUE to include Sniff Subrating */
+#ifndef BTM_SSR_INCLUDED
+#define BTM_SSR_INCLUDED                TRUE
+#endif
+
+/*************************
+** End of Lisbon Features
+**************************/
+
+/* Used for conformance testing ONLY */
+#ifndef BTM_BLE_CONFORMANCE_TESTING
+#define BTM_BLE_CONFORMANCE_TESTING           FALSE
+#endif
+
+
+/******************************************************************************
+**
+** L2CAP
+**
+******************************************************************************/
+
+/* Flow control and retransmission mode */
+
+#ifndef L2CAP_FCR_INCLUDED
+#define L2CAP_FCR_INCLUDED TRUE
+#endif
+
+/* The maximum number of simultaneous links that L2CAP can support. */
+#ifndef MAX_ACL_CONNECTIONS
+#define MAX_L2CAP_LINKS             7
+#else
+#define MAX_L2CAP_LINKS             MAX_ACL_CONNECTIONS
+#endif
+
+/* The maximum number of simultaneous channels that L2CAP can support. */
+#ifndef MAX_L2CAP_CHANNELS
+#define MAX_L2CAP_CHANNELS          10
+#endif
+
+/* The maximum number of simultaneous applications that can register with L2CAP. */
+#ifndef MAX_L2CAP_CLIENTS
+#define MAX_L2CAP_CLIENTS           15
+#endif
+
+/* The number of seconds of link inactivity before a link is disconnected. */
+#ifndef L2CAP_LINK_INACTIVITY_TOUT
+#define L2CAP_LINK_INACTIVITY_TOUT  4
+#endif
+
+/* The number of seconds of link inactivity after bonding before a link is disconnected. */
+#ifndef L2CAP_BONDING_TIMEOUT
+#define L2CAP_BONDING_TIMEOUT       3
+#endif
+
+/* The time from the HCI connection complete to disconnect if no channel is established. */
+#ifndef L2CAP_LINK_STARTUP_TOUT
+#define L2CAP_LINK_STARTUP_TOUT     60
+#endif
+
+/* The L2CAP MTU; must be in accord with the HCI ACL pool size. */
+#ifndef L2CAP_MTU_SIZE
+#define L2CAP_MTU_SIZE              1691
+#endif
+
+/* The L2CAP MPS over Bluetooth; must be in accord with the FCR tx pool size and ACL down buffer size. */
+#ifndef L2CAP_MPS_OVER_BR_EDR
+#define L2CAP_MPS_OVER_BR_EDR       1010
+#endif
+
+/* This is set to enable host flow control. */
+#ifndef L2CAP_HOST_FLOW_CTRL
+#define L2CAP_HOST_FLOW_CTRL        FALSE
+#endif
+
+/* If host flow control enabled, this is the number of buffers the controller can have unacknowledged. */
+#ifndef L2CAP_HOST_FC_ACL_BUFS
+#define L2CAP_HOST_FC_ACL_BUFS      20
+#endif
+
+/* The percentage of the queue size allowed before a congestion event is sent to the L2CAP client (typically 120%). */
+#ifndef L2CAP_FWD_CONG_THRESH
+#define L2CAP_FWD_CONG_THRESH       120
+#endif
+
+/* This is set to enable L2CAP to  take the ACL link out of park mode when ACL data is to be sent. */
+#ifndef L2CAP_WAKE_PARKED_LINK
+#define L2CAP_WAKE_PARKED_LINK      TRUE
+#endif
+
+/* Whether link wants to be the master or the slave. */
+#ifndef L2CAP_DESIRED_LINK_ROLE
+#define L2CAP_DESIRED_LINK_ROLE     HCI_ROLE_SLAVE
+#endif
+
+/* Include Non-Flushable Packet Boundary Flag feature of Lisbon */
+#ifndef L2CAP_NON_FLUSHABLE_PB_INCLUDED
+#define L2CAP_NON_FLUSHABLE_PB_INCLUDED     TRUE
+#endif
+
+/* Minimum number of ACL credit for high priority link */
+#ifndef L2CAP_HIGH_PRI_MIN_XMIT_QUOTA
+#define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA       4
+#endif
+
+/* used for monitoring HCI ACL credit management */
+#ifndef L2CAP_HCI_FLOW_CONTROL_DEBUG
+#define L2CAP_HCI_FLOW_CONTROL_DEBUG        TRUE
+#endif
+
+/* Used for calculating transmit buffers off of */
+#ifndef L2CAP_NUM_XMIT_BUFFS
+#define L2CAP_NUM_XMIT_BUFFS                HCI_ACL_BUF_MAX
+#endif
+
+/* Unicast Connectionless Data */
+#ifndef L2CAP_UCD_INCLUDED
+#define L2CAP_UCD_INCLUDED                  FALSE
+#endif
+
+/* Unicast Connectionless Data MTU */
+#ifndef L2CAP_UCD_MTU
+#define L2CAP_UCD_MTU                       L2CAP_MTU_SIZE
+#endif
+
+/* Unicast Connectionless Data Idle Timeout */
+#ifndef L2CAP_UCD_IDLE_TIMEOUT
+#define L2CAP_UCD_IDLE_TIMEOUT              2
+#endif
+
+/* Unicast Connectionless Data Idle Timeout */
+#ifndef L2CAP_UCD_CH_PRIORITY
+#define L2CAP_UCD_CH_PRIORITY               L2CAP_CHNL_PRIORITY_MEDIUM
+#endif
+
+/* Max clients on Unicast Connectionless Data */
+#ifndef L2CAP_MAX_UCD_CLIENTS
+#define L2CAP_MAX_UCD_CLIENTS               5
+#endif
+
+/* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */
+/* Excluding L2CAP signaling channel and UCD */
+#ifndef L2CAP_NUM_FIXED_CHNLS
+#define L2CAP_NUM_FIXED_CHNLS               4
+#endif
+
+/* First fixed channel supported */
+#ifndef L2CAP_FIRST_FIXED_CHNL
+#define L2CAP_FIRST_FIXED_CHNL              3
+#endif
+
+#ifndef L2CAP_LAST_FIXED_CHNL
+#define L2CAP_LAST_FIXED_CHNL           (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1)
+#endif
+
+/* Round Robin service channels in link */
+#ifndef L2CAP_ROUND_ROBIN_CHANNEL_SERVICE
+#define L2CAP_ROUND_ROBIN_CHANNEL_SERVICE   TRUE
+#endif
+
+/* Used for calculating transmit buffers off of */
+#ifndef L2CAP_NUM_XMIT_BUFFS
+#define L2CAP_NUM_XMIT_BUFFS                HCI_ACL_BUF_MAX
+#endif
+
+/* Used for features using fixed channels; set to zero if no fixed channels supported (BLE, etc.) */
+#ifndef L2CAP_NUM_FIXED_CHNLS
+#define L2CAP_NUM_FIXED_CHNLS               1
+#endif
+
+/* First fixed channel supported */
+#ifndef L2CAP_FIRST_FIXED_CHNL
+#define L2CAP_FIRST_FIXED_CHNL              3
+#endif
+
+#ifndef L2CAP_LAST_FIXED_CHNL
+#define L2CAP_LAST_FIXED_CHNL           (L2CAP_FIRST_FIXED_CHNL + L2CAP_NUM_FIXED_CHNLS - 1)
+#endif
+
+/* used for monitoring eL2CAP data flow */
+#ifndef L2CAP_ERTM_STATS
+#define L2CAP_ERTM_STATS                    FALSE
+#endif
+
+/* USED FOR FCR TEST ONLY:  When TRUE generates bad tx and rx packets */
+#ifndef L2CAP_CORRUPT_ERTM_PKTS
+#define L2CAP_CORRUPT_ERTM_PKTS             FALSE
+#endif
+
+/* Used for conformance testing ONLY:  When TRUE lets scriptwrapper overwrite info response */
+#ifndef L2CAP_CONFORMANCE_TESTING
+#define L2CAP_CONFORMANCE_TESTING           FALSE
+#endif
+
+
+#ifndef TIMER_PARAM_TYPE
+#ifdef  WIN2000
+#define TIMER_PARAM_TYPE    void *
+#else
+#define TIMER_PARAM_TYPE    UINT32
+#endif
+#endif
+
+/******************************************************************************
+**
+** BLE
+**
+******************************************************************************/
+
+#ifndef BLE_INCLUDED
+#define BLE_INCLUDED            FALSE
+#endif
+
+#ifndef LOCAL_BLE_CONTROLLER_ID
+#define LOCAL_BLE_CONTROLLER_ID         (1)
+#endif
+
+/******************************************************************************
+**
+** ATT/GATT Protocol/Profile Settings
+**
+******************************************************************************/
+#ifndef ATT_INCLUDED
+#define ATT_INCLUDED         FALSE
+#endif
+
+#ifndef ATT_DEBUG
+#define ATT_DEBUG           FALSE
+#endif
+
+#ifndef GATT_SERVER_ENABLED
+#define GATT_SERVER_ENABLED          FALSE
+#endif
+
+#ifndef GATT_CLIENT_ENABLED
+#define GATT_CLIENT_ENABLED          FALSE
+#endif
+
+#ifndef GATT_MAX_SR_PROFILES
+#define GATT_MAX_SR_PROFILES        32 /* max is 32 */
+#endif
+
+#ifndef GATT_MAX_APPS
+#define GATT_MAX_APPS            10 /* note: 2 apps used internally GATT and GAP */
+#endif
+
+#ifndef GATT_MAX_CL_PROFILES
+#define GATT_MAX_CL_PROFILES        4
+#endif
+
+#ifndef GATT_MAX_PHY_CHANNEL
+#define GATT_MAX_PHY_CHANNEL        4
+#endif
+
+/* Used for conformance testing ONLY */
+#ifndef GATT_CONFORMANCE_TESTING
+#define GATT_CONFORMANCE_TESTING           FALSE
+#endif
+
+/* number of background connection device allowence, ideally to be the same as WL size
+*/
+#ifndef GATT_MAX_BG_CONN_DEV
+#define GATT_MAX_BG_CONN_DEV        32
+#endif
+
+/******************************************************************************
+**
+** SMP
+**
+******************************************************************************/
+#ifndef SMP_INCLUDED
+#define SMP_INCLUDED         FALSE
+#endif
+
+#ifndef SMP_DEBUG
+#define SMP_DEBUG            FALSE
+#endif
+
+#ifndef SMP_DEFAULT_AUTH_REQ
+#define SMP_DEFAULT_AUTH_REQ    SMP_AUTH_NB_ENC_ONLY
+#endif
+
+#ifndef SMP_MAX_ENC_KEY_SIZE
+#define SMP_MAX_ENC_KEY_SIZE    16
+#endif
+
+#ifndef SMP_MIN_ENC_KEY_SIZE
+#define SMP_MIN_ENC_KEY_SIZE    7
+#endif
+
+/* Used for conformance testing ONLY */
+#ifndef SMP_CONFORMANCE_TESTING
+#define SMP_CONFORMANCE_TESTING           FALSE
+#endif
+
+/******************************************************************************
+**
+** SDP
+**
+******************************************************************************/
+
+/* This is set to enable SDP server functionality. */
+#ifndef SDP_SERVER_ENABLED
+#define SDP_SERVER_ENABLED          TRUE
+#endif
+
+/* The maximum number of SDP records the server can support. */
+#ifndef SDP_MAX_RECORDS
+#define SDP_MAX_RECORDS             20
+#endif
+
+/* The maximum number of attributes in each record. */
+#ifndef SDP_MAX_REC_ATTR
+//#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
+#define SDP_MAX_REC_ATTR            25
+//#else
+//#define SDP_MAX_REC_ATTR            13
+//#endif
+#endif
+
+#ifndef SDP_MAX_PAD_LEN
+#define SDP_MAX_PAD_LEN             600
+#endif
+
+/* The maximum length, in bytes, of an attribute. */
+#ifndef SDP_MAX_ATTR_LEN
+//#if defined(HID_DEV_INCLUDED) && (HID_DEV_INCLUDED==TRUE)
+//#define SDP_MAX_ATTR_LEN            80
+//#else
+//#define SDP_MAX_ATTR_LEN            100
+//#endif
+#define SDP_MAX_ATTR_LEN            400
+#endif
+
+/* The maximum number of attribute filters supported by SDP databases. */
+#ifndef SDP_MAX_ATTR_FILTERS
+#define SDP_MAX_ATTR_FILTERS        15
+#endif
+
+/* The maximum number of UUID filters supported by SDP databases. */
+#ifndef SDP_MAX_UUID_FILTERS
+#define SDP_MAX_UUID_FILTERS        3
+#endif
+
+/* This is set to enable SDP client functionality. */
+#ifndef SDP_CLIENT_ENABLED
+#define SDP_CLIENT_ENABLED          TRUE
+#endif
+
+/* The maximum number of record handles retrieved in a search. */
+#ifndef SDP_MAX_DISC_SERVER_RECS
+#define SDP_MAX_DISC_SERVER_RECS    21
+#endif
+
+/* The size of a scratchpad buffer, in bytes, for storing the response to an attribute request. */
+#ifndef SDP_MAX_LIST_BYTE_COUNT
+#define SDP_MAX_LIST_BYTE_COUNT     4096
+#endif
+
+/* The maximum number of parameters in an SDP protocol element. */
+#ifndef SDP_MAX_PROTOCOL_PARAMS
+#define SDP_MAX_PROTOCOL_PARAMS     2
+#endif
+
+/* The maximum number of simultaneous client and server connections. */
+#ifndef SDP_MAX_CONNECTIONS
+#define SDP_MAX_CONNECTIONS         4
+#endif
+
+/* The MTU size for the L2CAP configuration. */
+#ifndef SDP_MTU_SIZE
+#define SDP_MTU_SIZE                256
+#endif
+
+/* The flush timeout for the L2CAP configuration. */
+#ifndef SDP_FLUSH_TO
+#define SDP_FLUSH_TO                0xFFFF
+#endif
+
+/* The name for security authorization. */
+#ifndef SDP_SERVICE_NAME
+#define SDP_SERVICE_NAME            "Service Discovery"
+#endif
+
+/* The security level for BTM. */
+#ifndef SDP_SECURITY_LEVEL
+#define SDP_SECURITY_LEVEL          BTM_SEC_NONE
+#endif
+
+/* Device identification feature. */
+#ifndef SDP_DI_INCLUDED
+#define SDP_DI_INCLUDED             TRUE
+#endif
+
+/******************************************************************************
+**
+** RFCOMM
+**
+******************************************************************************/
+
+#ifndef RFCOMM_INCLUDED
+#define RFCOMM_INCLUDED             TRUE
+#endif
+
+/* The maximum number of ports supported. */
+#ifndef MAX_RFC_PORTS
+#define MAX_RFC_PORTS               30
+#endif
+
+/* The maximum simultaneous links to different devices. */
+#ifndef MAX_ACL_CONNECTIONS
+#define MAX_BD_CONNECTIONS          7
+#else
+#define MAX_BD_CONNECTIONS          MAX_ACL_CONNECTIONS
+#endif
+
+/* The port receive queue low watermark level, in bytes. */
+#ifndef PORT_RX_LOW_WM
+#define PORT_RX_LOW_WM              (BTA_RFC_MTU_SIZE * PORT_RX_BUF_LOW_WM)
+#endif
+
+/* The port receive queue high watermark level, in bytes. */
+#ifndef PORT_RX_HIGH_WM
+#define PORT_RX_HIGH_WM             (BTA_RFC_MTU_SIZE * PORT_RX_BUF_HIGH_WM)
+#endif
+
+/* The port receive queue critical watermark level, in bytes. */
+#ifndef PORT_RX_CRITICAL_WM
+#define PORT_RX_CRITICAL_WM         (BTA_RFC_MTU_SIZE * PORT_RX_BUF_CRITICAL_WM)
+#endif
+
+/* The port receive queue low watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_LOW_WM
+#define PORT_RX_BUF_LOW_WM          4
+#endif
+
+/* The port receive queue high watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_HIGH_WM
+#define PORT_RX_BUF_HIGH_WM         10
+#endif
+
+/* The port receive queue critical watermark level, in number of buffers. */
+#ifndef PORT_RX_BUF_CRITICAL_WM
+#define PORT_RX_BUF_CRITICAL_WM     15
+#endif
+
+/* The port transmit queue high watermark level, in bytes. */
+#ifndef PORT_TX_HIGH_WM
+#define PORT_TX_HIGH_WM             (BTA_RFC_MTU_SIZE * PORT_TX_BUF_HIGH_WM)
+#endif
+
+/* The port transmit queue critical watermark level, in bytes. */
+#ifndef PORT_TX_CRITICAL_WM
+#define PORT_TX_CRITICAL_WM         (BTA_RFC_MTU_SIZE * PORT_TX_BUF_CRITICAL_WM)
+#endif
+
+/* The port transmit queue high watermark level, in number of buffers. */
+#ifndef PORT_TX_BUF_HIGH_WM
+#define PORT_TX_BUF_HIGH_WM         10
+#endif
+
+/* The port transmit queue high watermark level, in number of buffers. */
+#ifndef PORT_TX_BUF_CRITICAL_WM
+#define PORT_TX_BUF_CRITICAL_WM     15
+#endif
+
+/* The RFCOMM multiplexer preferred flow control mechanism. */
+#ifndef PORT_FC_DEFAULT
+#define PORT_FC_DEFAULT             PORT_FC_CREDIT
+#endif
+
+/* The maximum number of credits receiver sends to peer when using credit-based flow control. */
+#ifndef PORT_CREDIT_RX_MAX
+#define PORT_CREDIT_RX_MAX          16
+#endif
+
+/* The credit low watermark level. */
+#ifndef PORT_CREDIT_RX_LOW
+#define PORT_CREDIT_RX_LOW          8
+#endif
+
+/* Test code allowing l2cap FEC on RFCOMM.*/
+#ifndef PORT_ENABLE_L2CAP_FCR_TEST
+#define PORT_ENABLE_L2CAP_FCR_TEST  FALSE
+#endif
+
+/* if application like BTA, Java or script test engine is running on other than BTU thread, */
+/* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_lock() or GKI_disable() */
+#ifndef PORT_SCHEDULE_LOCK
+#define PORT_SCHEDULE_LOCK          GKI_disable()
+#endif
+
+/* if application like BTA, Java or script test engine is running on other than BTU thread, */
+/* PORT_SCHEDULE_LOCK shall be defined as GKI_sched_unlock() or GKI_enable() */
+#ifndef PORT_SCHEDULE_UNLOCK
+#define PORT_SCHEDULE_UNLOCK        GKI_enable()
+#endif
+
+/******************************************************************************
+**
+** TCS
+**
+******************************************************************************/
+
+#ifndef TCS_INCLUDED
+#define TCS_INCLUDED                FALSE
+#endif
+
+/* If set to TRUE, gives lean TCS state machine configuration. */
+#ifndef TCS_LEAN
+#define TCS_LEAN                    FALSE
+#endif
+
+/* To include/exclude point-to-multipoint broadcast SETUP configuration. */
+#ifndef TCS_BCST_SETUP_INCLUDED
+#define TCS_BCST_SETUP_INCLUDED     TRUE
+#endif
+
+/* To include/exclude supplementary services. */
+#ifndef TCS_SUPP_SVCS_INCLUDED
+#define TCS_SUPP_SVCS_INCLUDED      TRUE
+#endif
+
+/* To include/exclude WUG master role. */
+#ifndef TCS_WUG_MASTER_INCLUDED
+#define TCS_WUG_MASTER_INCLUDED     TRUE
+#endif
+
+/* To include/exclude WUG member role. */
+#ifndef TCS_WUG_MEMBER_INCLUDED
+#define TCS_WUG_MEMBER_INCLUDED     TRUE
+#endif
+
+/* Maximum number of WUG members. */
+#ifndef TCS_MAX_WUG_MEMBERS
+#define TCS_MAX_WUG_MEMBERS         7
+#endif
+
+/* Broadcom specific acknowledgement message to ensure fast and robust operation of WUG FIMA procedure. */
+#ifndef TCS_WUG_LISTEN_ACPT_ACK_INCLUDED
+#define TCS_WUG_LISTEN_ACPT_ACK_INCLUDED TRUE
+#endif
+
+/* The number of simultaneous calls supported. */
+#ifndef TCS_MAX_NUM_SIMUL_CALLS
+#define TCS_MAX_NUM_SIMUL_CALLS     3
+#endif
+
+/* The number of devices the device can connect to. */
+#ifndef TCS_MAX_NUM_ACL_CONNS
+#define TCS_MAX_NUM_ACL_CONNS       7
+#endif
+
+/* The maximum length, in bytes, of the company specific information element. */
+#ifndef TCS_MAX_CO_SPEC_LEN
+#define TCS_MAX_CO_SPEC_LEN         40
+#endif
+
+/* The maximum length, in bytes, of the audio control information element . */
+#ifndef TCS_MAX_AUDIO_CTL_LEN
+#define TCS_MAX_AUDIO_CTL_LEN       40
+#endif
+
+/* (Dis)allow EDR ESCO */
+#ifndef TCS_AUDIO_USE_ESCO_EDR
+#define TCS_AUDIO_USE_ESCO_EDR      FALSE
+#endif
+
+/******************************************************************************
+**
+** OBX
+**
+******************************************************************************/
+#ifndef OBX_INCLUDED
+#define OBX_INCLUDED               FALSE
+#endif
+
+#ifndef OBX_CLIENT_INCLUDED
+#define OBX_CLIENT_INCLUDED        TRUE
+#endif
+
+#ifndef OBX_SERVER_INCLUDED
+#define OBX_SERVER_INCLUDED        TRUE
+#endif
+
+/* TRUE to include OBEX authentication/MD5 code */
+#ifndef OBX_MD5_INCLUDED
+#define OBX_MD5_INCLUDED           TRUE
+#endif
+
+/* TRUE to include OBEX authentication/MD5 test code */
+#ifndef OBX_MD5_TEST_INCLUDED
+#define OBX_MD5_TEST_INCLUDED       FALSE
+#endif
+
+/* TRUE to include OBEX 1.4 enhancement (including Obex Over L2CAP) */
+#ifndef OBX_14_INCLUDED
+#define OBX_14_INCLUDED             FALSE
+#endif
+/* MD5 code is required to use OBEX 1.4 features (Reliable session) */
+#if (OBX_MD5_INCLUDED == FALSE)
+#undef OBX_14_INCLUDED
+#define OBX_14_INCLUDED             FALSE
+#endif
+
+/* L2CAP FCR/eRTM mode is required to use OBEX Over L2CAP */
+#if (L2CAP_FCR_INCLUDED == FALSE)
+#undef OBX_14_INCLUDED
+#define OBX_14_INCLUDED             FALSE
+#endif
+
+/* The timeout value (in seconds) for reliable sessions to remain in suspend. 0xFFFFFFFF for no timeout event. */
+#ifndef OBX_SESS_TIMEOUT_VALUE
+#define OBX_SESS_TIMEOUT_VALUE      600
+#endif
+
+/* The idle timeout value. 0 for no timeout event. */
+#ifndef OBX_TIMEOUT_VALUE
+#define OBX_TIMEOUT_VALUE           60
+#endif
+
+/* Timeout value used for disconnect */
+#ifndef OBX_DISC_TOUT_VALUE
+#define OBX_DISC_TOUT_VALUE         5
+#endif
+
+/* The maximum number of registered servers. */
+#ifndef OBX_NUM_SERVERS
+#define OBX_NUM_SERVERS             12
+#endif
+
+/* The maximum number of sessions per registered server. */
+#ifndef OBX_MAX_SR_SESSION
+#define OBX_MAX_SR_SESSION          4
+#endif
+
+/* The maximum number of sessions for all registered servers.
+ * (must be equal or bigger than OBX_NUM_SERVERS) */
+#ifndef OBX_NUM_SR_SESSIONS
+#define OBX_NUM_SR_SESSIONS         26
+#endif
+
+/* The maximum number of sessions per registered server.
+ * must be less than MAX_BD_CONNECTIONS */
+#ifndef OBX_MAX_SR_SESSION
+#define OBX_MAX_SR_SESSION          4
+#endif
+
+/* The maximum number of suspended sessions per registered servers. */
+#ifndef OBX_MAX_SUSPEND_SESSIONS
+#define OBX_MAX_SUSPEND_SESSIONS    4
+#endif
+
+/* The maximum number of active clients. */
+#ifndef OBX_NUM_CLIENTS
+#define OBX_NUM_CLIENTS             8
+#endif
+
+/* The maximum length of OBEX target header.*/
+#ifndef OBX_MAX_TARGET_LEN
+#define OBX_MAX_TARGET_LEN          16
+#endif
+
+/* The maximum length of authentication challenge realm.*/
+#ifndef OBX_MAX_REALM_LEN
+#define OBX_MAX_REALM_LEN           30
+#endif
+
+/* The maximum of GKI buffer queued at OBX before flow control L2CAP */
+#ifndef OBX_MAX_RX_QUEUE_COUNT
+#define OBX_MAX_RX_QUEUE_COUNT      3
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+   Pool ID where to reassemble the SDU.
+   This Pool will allow buffers to be used that are larger than
+   the L2CAP_MAX_MTU. */
+#ifndef OBX_USER_RX_POOL_ID
+#define OBX_USER_RX_POOL_ID     OBX_LRG_DATA_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+   Pool ID where to hold the SDU.
+   This Pool will allow buffers to be used that are larger than
+   the L2CAP_MAX_MTU. */
+#ifndef OBX_USER_TX_POOL_ID
+#define OBX_USER_TX_POOL_ID     OBX_LRG_DATA_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef OBX_FCR_RX_POOL_ID
+#define OBX_FCR_RX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note:  This pool needs to have enough buffers to hold two times the window size negotiated
+ in the L2CA_SetFCROptions (2 * tx_win_size)  to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ L2CA_SetFCROptions plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef OBX_FCR_TX_POOL_ID
+#define OBX_FCR_TX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Size of the transmission window when using enhanced retransmission mode. Not used
+in basic and streaming modes. Range: 1 - 63
+*/
+#ifndef OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR
+#define OBX_FCR_OPT_TX_WINDOW_SIZE_BR_EDR       20
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef OBX_FCR_OPT_MAX_TX_B4_DISCNT
+#define OBX_FCR_OPT_MAX_TX_B4_DISCNT    20
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Retransmission Timeout
+Range: Minimum 2000 (2 secs) on BR/EDR when supporting PBF.
+ */
+#ifndef OBX_FCR_OPT_RETX_TOUT
+#define OBX_FCR_OPT_RETX_TOUT           2000
+#endif
+
+/* This option is application when OBX_14_INCLUDED=TRUE
+Monitor Timeout
+Range: Minimum 12000 (12 secs) on BR/EDR when supporting PBF.
+*/
+#ifndef OBX_FCR_OPT_MONITOR_TOUT
+#define OBX_FCR_OPT_MONITOR_TOUT        12000
+#endif
+
+/******************************************************************************
+**
+** BNEP
+**
+******************************************************************************/
+
+#ifndef BNEP_INCLUDED
+#define BNEP_INCLUDED               TRUE
+#endif
+
+/* Protocol filtering is an optional feature. Bydefault it will be turned on */
+#ifndef BNEP_SUPPORTS_PROT_FILTERS
+#define BNEP_SUPPORTS_PROT_FILTERS          TRUE
+#endif
+
+/* Multicast filtering is an optional feature. Bydefault it will be turned on */
+#ifndef BNEP_SUPPORTS_MULTI_FILTERS
+#define BNEP_SUPPORTS_MULTI_FILTERS         TRUE
+#endif
+
+/* BNEP status API call is used mainly to get the L2CAP handle */
+#ifndef BNEP_SUPPORTS_STATUS_API
+#define BNEP_SUPPORTS_STATUS_API            TRUE
+#endif
+
+/* This is just a debug function */
+#ifndef BNEP_SUPPORTS_DEBUG_DUMP
+#define BNEP_SUPPORTS_DEBUG_DUMP            TRUE
+#endif
+
+#ifndef BNEP_SUPPORTS_ALL_UUID_LENGTHS
+#define BNEP_SUPPORTS_ALL_UUID_LENGTHS      TRUE    /* Otherwise it will support only 16bit UUIDs */
+#endif
+
+/*
+** When BNEP connection changes roles after the connection is established
+** we will do an authentication check again on the new role
+*/
+#ifndef BNEP_DO_AUTH_FOR_ROLE_SWITCH
+#define BNEP_DO_AUTH_FOR_ROLE_SWITCH        TRUE
+#endif
+
+
+/* Maximum number of protocol filters supported. */
+#ifndef BNEP_MAX_PROT_FILTERS
+#define BNEP_MAX_PROT_FILTERS       5
+#endif
+
+/* Maximum number of multicast filters supported. */
+#ifndef BNEP_MAX_MULTI_FILTERS
+#define BNEP_MAX_MULTI_FILTERS      5
+#endif
+
+/* Minimum MTU size. */
+#ifndef BNEP_MIN_MTU_SIZE
+#define BNEP_MIN_MTU_SIZE           L2CAP_MTU_SIZE
+#endif
+
+/* Preferred MTU size. */
+#ifndef BNEP_MTU_SIZE
+#define BNEP_MTU_SIZE               BNEP_MIN_MTU_SIZE
+#endif
+
+/* Maximum size of user data, in bytes.  */
+#ifndef BNEP_MAX_USER_DATA_SIZE
+#define BNEP_MAX_USER_DATA_SIZE     1500
+#endif
+
+/* Maximum number of buffers allowed in transmit data queue. */
+#ifndef BNEP_MAX_XMITQ_DEPTH
+#define BNEP_MAX_XMITQ_DEPTH        20
+#endif
+
+/* Maximum number BNEP of connections supported. */
+#ifndef BNEP_MAX_CONNECTIONS
+#define BNEP_MAX_CONNECTIONS        7
+#endif
+
+
+/******************************************************************************
+**
+** AVDTP
+**
+******************************************************************************/
+
+#ifndef AVDT_INCLUDED
+#define AVDT_INCLUDED               TRUE
+#endif
+
+/* Include reporting capability in AVDTP */
+#ifndef AVDT_REPORTING
+#define AVDT_REPORTING              TRUE
+#endif
+
+/* Include multiplexing capability in AVDTP */
+#ifndef AVDT_MULTIPLEXING
+#define AVDT_MULTIPLEXING           TRUE
+#endif
+
+/* Number of simultaneous links to different peer devices. */
+#ifndef AVDT_NUM_LINKS
+#define AVDT_NUM_LINKS              2
+#endif
+
+/* Number of simultaneous stream endpoints. */
+#ifndef AVDT_NUM_SEPS
+#define AVDT_NUM_SEPS               3
+#endif
+
+/* Number of transport channels setup per media stream(audio or video) */
+#ifndef AVDT_NUM_CHANNELS
+
+#if AVDT_REPORTING == TRUE
+/* signaling, media and reporting channels */
+#define AVDT_NUM_CHANNELS   3
+#else
+/* signaling and media channels */
+#define AVDT_NUM_CHANNELS   2
+#endif
+
+#endif
+
+/* Number of transport channels setup by AVDT for all media streams
+ * AVDT_NUM_CHANNELS * Number of simultaneous streams.
+ */
+#ifndef AVDT_NUM_TC_TBL
+#define AVDT_NUM_TC_TBL             6
+#endif
+
+
+/* Maximum size in bytes of the codec capabilities information element. */
+#ifndef AVDT_CODEC_SIZE
+#define AVDT_CODEC_SIZE             10
+#endif
+
+/* Maximum size in bytes of the content protection information element. */
+#ifndef AVDT_PROTECT_SIZE
+#define AVDT_PROTECT_SIZE           90
+#endif
+
+/* Maximum number of GKI buffers in the fragment queue (for video frames).
+ * Must be less than the number of buffers in the buffer pool of size AVDT_DATA_POOL_SIZE */
+#ifndef AVDT_MAX_FRAG_COUNT
+#define AVDT_MAX_FRAG_COUNT         15
+#endif
+
+/******************************************************************************
+**
+** PAN
+**
+******************************************************************************/
+
+#ifndef PAN_INCLUDED
+#define PAN_INCLUDED                     TRUE
+#endif
+
+/* This will enable the PANU role */
+#ifndef PAN_SUPPORTS_ROLE_PANU
+#define PAN_SUPPORTS_ROLE_PANU              TRUE
+#endif
+
+/* This will enable the GN role */
+#ifndef PAN_SUPPORTS_ROLE_GN
+#define PAN_SUPPORTS_ROLE_GN                TRUE
+#endif
+
+/* This will enable the NAP role */
+#ifndef PAN_SUPPORTS_ROLE_NAP
+#define PAN_SUPPORTS_ROLE_NAP               TRUE
+#endif
+
+/* This is just for debugging purposes */
+#ifndef PAN_SUPPORTS_DEBUG_DUMP
+#define PAN_SUPPORTS_DEBUG_DUMP             TRUE
+#endif
+
+
+/* Maximum number of PAN connections allowed */
+#ifndef MAX_PAN_CONNS
+#define MAX_PAN_CONNS                    7
+#endif
+
+/* Default service name for NAP role */
+#ifndef PAN_NAP_DEFAULT_SERVICE_NAME
+#define PAN_NAP_DEFAULT_SERVICE_NAME    "Network Access Point Service"
+#endif
+
+/* Default service name for GN role */
+#ifndef PAN_GN_DEFAULT_SERVICE_NAME
+#define PAN_GN_DEFAULT_SERVICE_NAME     "Group Network Service"
+#endif
+
+/* Default service name for PANU role */
+#ifndef PAN_PANU_DEFAULT_SERVICE_NAME
+#define PAN_PANU_DEFAULT_SERVICE_NAME   "PAN User Service"
+#endif
+
+/* Default description for NAP role service */
+#ifndef PAN_NAP_DEFAULT_DESCRIPTION
+#define PAN_NAP_DEFAULT_DESCRIPTION     "NAP"
+#endif
+
+/* Default description for GN role service */
+#ifndef PAN_GN_DEFAULT_DESCRIPTION
+#define PAN_GN_DEFAULT_DESCRIPTION      "GN"
+#endif
+
+/* Default description for PANU role service */
+#ifndef PAN_PANU_DEFAULT_DESCRIPTION
+#define PAN_PANU_DEFAULT_DESCRIPTION    "PANU"
+#endif
+
+/* Default Security level for PANU role. */
+#ifndef PAN_PANU_SECURITY_LEVEL
+#define PAN_PANU_SECURITY_LEVEL          0
+#endif
+
+/* Default Security level for GN role. */
+#ifndef PAN_GN_SECURITY_LEVEL
+#define PAN_GN_SECURITY_LEVEL            0
+#endif
+
+/* Default Security level for NAP role. */
+#ifndef PAN_NAP_SECURITY_LEVEL
+#define PAN_NAP_SECURITY_LEVEL           0
+#endif
+
+
+
+
+/******************************************************************************
+**
+** GAP
+**
+******************************************************************************/
+
+#ifndef GAP_INCLUDED
+#define GAP_INCLUDED                FALSE
+#endif
+
+/* This is set to enable use of GAP L2CAP connections. */
+#ifndef GAP_CONN_INCLUDED
+#define GAP_CONN_INCLUDED           TRUE
+#endif
+
+/* This is set to enable posting event for data write */
+#ifndef GAP_CONN_POST_EVT_INCLUDED
+#define GAP_CONN_POST_EVT_INCLUDED  FALSE
+#endif
+
+/* The maximum number of simultaneous GAP L2CAP connections. */
+#ifndef GAP_MAX_CONNECTIONS
+#define GAP_MAX_CONNECTIONS         8
+#endif
+
+/******************************************************************************
+**
+** CTP
+**
+******************************************************************************/
+
+#ifndef CTP_INCLUDED
+#define CTP_INCLUDED                FALSE
+#endif
+
+/* To include CTP gateway functionality or not. */
+#ifndef CTP_GW_INCLUDED
+#define CTP_GW_INCLUDED             TRUE
+#endif
+
+/* The number of terminals supported. */
+#ifndef CTP_MAX_NUM_TLS
+#define CTP_MAX_NUM_TLS             7
+#endif
+
+/* If the controller can not support sniff mode when the SCO is up, set this to FALSE. */
+#ifndef CTP_USE_SNIFF_ON_SCO
+#define CTP_USE_SNIFF_ON_SCO        FALSE
+#endif
+
+/* When ACL link between TL and GW is idle for more than this amount of seconds, the ACL may be put to low power mode. */
+#ifndef CTP_TL_IDLE_TIMEOUT
+#define CTP_TL_IDLE_TIMEOUT         90
+#endif
+
+/* To include CTP terminal functionality or not. */
+#ifndef CTP_TL_INCLUDED
+#define CTP_TL_INCLUDED             TRUE
+#endif
+
+/* To include CTP device discovery functionality or not. */
+#ifndef CTP_DISCOVERY_INCLUDED
+#define CTP_DISCOVERY_INCLUDED      TRUE
+#endif
+
+/* set to TRUE for controllers that do not support multi-point */
+#ifndef CTP_TL_WAIT_DISC
+#define CTP_TL_WAIT_DISC            TRUE
+#endif
+
+/* The CTP inquiry database size. */
+#ifndef CTP_INQ_DB_SIZE
+#define CTP_INQ_DB_SIZE             CTP_DISC_REC_SIZE
+#endif
+
+/* The CTP discovery record size. */
+#ifndef CTP_DISC_REC_SIZE
+#define CTP_DISC_REC_SIZE           60
+#endif
+
+/* CTP TL would try to re-establish L2CAP channel after channel is disconnected for this amount of seconds. */
+#ifndef CTP_GUARD_LINK_LOST
+#define CTP_GUARD_LINK_LOST         1
+#endif
+
+/* The link policy bitmap. */
+#ifndef CTP_DEFAULT_LINK_POLICY
+#define CTP_DEFAULT_LINK_POLICY     0x000F
+#endif
+
+/* The minimum period interval used for the sniff and park modes. */
+#ifndef CTP_DEF_LOWPWR_MIN_PERIOD
+#define CTP_DEF_LOWPWR_MIN_PERIOD   0x100
+#endif
+
+/* The maximum period interval used for the sniff and park modes. */
+#ifndef CTP_DEF_LOWPWR_MAX_PERIOD
+#define CTP_DEF_LOWPWR_MAX_PERIOD   0x1E0
+#endif
+
+/* The number of baseband receive slot sniff attempts. */
+#ifndef CTP_DEF_LOWPWR_ATTEMPT
+#define CTP_DEF_LOWPWR_ATTEMPT      0x200
+#endif
+
+/* The number of baseband receive slots for sniff timeout. */
+#ifndef CTP_DEF_LOWPWR_TIMEOUT
+#define CTP_DEF_LOWPWR_TIMEOUT      0x200
+#endif
+
+/* This is set if CTP is to use park mode. */
+#ifndef CTP_PARK_INCLUDED
+#define CTP_PARK_INCLUDED           TRUE
+#endif
+
+/* This is set if CTP is to use sniff mode. */
+#ifndef CTP_SNIFF_INCLUDED
+#define CTP_SNIFF_INCLUDED          TRUE
+#endif
+
+/* To include CTP data exchange functionality or not. */
+#ifndef CTP_DATA_EXCHG_FEATURE
+#define CTP_DATA_EXCHG_FEATURE      FALSE
+#endif
+
+/* To include CTP GW intercom functionality or not. */
+#ifndef CTP_GW_INTERCOM_FEATURE
+#define CTP_GW_INTERCOM_FEATURE     FALSE
+#endif
+
+/* The MTU size for L2CAP channel. */
+#ifndef CTP_MTU_SIZE
+#define CTP_MTU_SIZE                200
+#endif
+
+/* The L2CAP PSM for the data exchange feature. */
+#ifndef CTP_DATA_EXCHG_PSM
+#define CTP_DATA_EXCHG_PSM          13
+#endif
+
+/* The flush timeout for L2CAP channels. */
+#ifndef CTP_FLUSH_TO
+#define CTP_FLUSH_TO                0xFFFF
+#endif
+
+/* The default service name for CTP. */
+#ifndef CTP_DEFAULT_SERVICE_NAME
+#define CTP_DEFAULT_SERVICE_NAME    "Cordless Telephony"
+#endif
+
+/* The CTP security level. */
+#ifndef CTP_SECURITY_LEVEL
+#define CTP_SECURITY_LEVEL          (BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)
+#endif
+
+/* The number of lines to the external network. */
+#ifndef CTP_MAX_LINES
+#define CTP_MAX_LINES               1
+#endif
+
+/* Test if the number of resources in TCS is consistent with CTP setting. */
+#ifndef CTP_TEST_FULL_TCS
+#define CTP_TEST_FULL_TCS           TRUE
+#endif
+
+/* The default inquiry mode. */
+#ifndef CTP_DEFAULT_INQUIRY_MODE
+#define CTP_DEFAULT_INQUIRY_MODE    BTM_GENERAL_INQUIRY
+#endif
+
+/* The default inquiry duration. */
+#ifndef CTP_DEFAULT_INQ_DURATION
+#define CTP_DEFAULT_INQ_DURATION    4
+#endif
+
+/* The maximum number of inquiry responses. */
+#ifndef CTP_DEFAULT_INQ_MAX_RESP
+#define CTP_DEFAULT_INQ_MAX_RESP    3
+#endif
+
+/* When TL does not create another L2CAP channel within this period of time GW declares that it's "Connected Limited". */
+#ifndef CTP_TL_CONN_TIMEOUT
+#define CTP_TL_CONN_TIMEOUT         5
+#endif
+
+/* The delay for ACL to completely disconnect (for intercom) before sending the connect request to GW. */
+#ifndef CTP_RECONNECT_DELAY
+#define CTP_RECONNECT_DELAY         5
+#endif
+
+/* How many times to retry connection when it has failed. */
+#ifndef CTP_RETRY_ON_CONN_ERR
+#define CTP_RETRY_ON_CONN_ERR       5
+#endif
+
+/******************************************************************************
+**
+** ICP
+**
+******************************************************************************/
+
+#ifndef ICP_INCLUDED
+#define ICP_INCLUDED                FALSE
+#endif
+
+/* The ICP default MTU. */
+#ifndef ICP_MTU_SIZE
+#define ICP_MTU_SIZE                100
+#endif
+
+/* The ICP security level. */
+#ifndef ICP_SECURITY_LEVEL
+#define ICP_SECURITY_LEVEL          BTM_SEC_NONE
+#endif
+
+/* The default service name for ICP. */
+#ifndef ICP_DEFAULT_SERVICE_NAME
+#define ICP_DEFAULT_SERVICE_NAME    "Intercom"
+#endif
+
+/* The flush timeout for L2CAP channels. */
+#ifndef ICP_FLUSH_TO
+#define ICP_FLUSH_TO                0xFFFF
+#endif
+
+/******************************************************************************
+**
+** SPP
+**
+******************************************************************************/
+
+#ifndef SPP_INCLUDED
+#define SPP_INCLUDED                FALSE
+#endif
+
+/* The SPP default MTU. */
+#ifndef SPP_DEFAULT_MTU
+#define SPP_DEFAULT_MTU             127
+#endif
+
+/* The interval, in seconds, that a client tries to reconnect to a service. */
+#ifndef SPP_RETRY_CONN_INTERVAL
+#define SPP_RETRY_CONN_INTERVAL     1
+#endif
+
+/* The SPP discoverable mode: limited or general. */
+#ifndef SPP_DISCOVERABLE_MODE
+#define SPP_DISCOVERABLE_MODE       BTM_GENERAL_DISCOVERABLE
+#endif
+
+/* The maximum number of inquiry results returned in by inquiry procedure. */
+#ifndef SPP_DEF_INQ_MAX_RESP
+#define SPP_DEF_INQ_MAX_RESP        10
+#endif
+
+/* The SPP discovery record size. */
+#ifndef SPP_DISC_REC_SIZE
+#define SPP_DISC_REC_SIZE           60
+#endif
+
+#ifndef SPP_MAX_RECS_PER_DEVICE
+#define SPP_MAX_RECS_PER_DEVICE     (SPP_DB_SIZE / SPP_DISC_REC_SIZE)
+#endif
+
+/* Inquiry duration in 1.28 second units. */
+#ifndef SPP_DEF_INQ_DURATION
+#define SPP_DEF_INQ_DURATION        9
+#endif
+
+/* keep the raw data received from SDP server in database. */
+#ifndef SDP_RAW_DATA_INCLUDED
+#define SDP_RAW_DATA_INCLUDED       TRUE
+#endif
+
+/* TRUE, to allow JV to create L2CAP connection on SDP PSM. */
+#ifndef SDP_FOR_JV_INCLUDED
+#define SDP_FOR_JV_INCLUDED         FALSE
+#endif
+
+/* Inquiry duration in 1.28 second units. */
+#ifndef SDP_DEBUG
+#define SDP_DEBUG                   TRUE
+#endif
+
+/******************************************************************************
+**
+** HSP2, HFP
+**
+******************************************************************************/
+
+#ifndef HSP2_INCLUDED
+#define HSP2_INCLUDED               FALSE
+#endif
+
+/* Include the ability to perform inquiry for peer devices. */
+#ifndef HSP2_INQUIRY_INCLUDED
+#define HSP2_INQUIRY_INCLUDED       TRUE
+#endif
+
+/* Include Audio Gateway specific code. */
+#ifndef HSP2_AG_INCLUDED
+#define HSP2_AG_INCLUDED            TRUE
+#endif
+
+/* Include Headset Specific Code. */
+#ifndef HSP2_HS_INCLUDED
+#define HSP2_HS_INCLUDED            TRUE
+#endif
+
+/* Include the ability to open an SCO connection for In-Band Ringing. */
+#ifndef HSP2_IB_RING_INCLUDED
+#define HSP2_IB_RING_INCLUDED       TRUE
+#endif
+
+/* Include the ability to repeat a ring. */
+#ifndef HSP2_AG_REPEAT_RING
+#define HSP2_AG_REPEAT_RING         TRUE
+#endif
+
+#ifndef HSP2_APP_CLOSES_ON_CKPD
+#define HSP2_APP_CLOSES_ON_CKPD     FALSE
+#endif
+
+
+/* Include the ability to park a connection. */
+#ifndef HSP2_PARK_INCLUDED
+#define HSP2_PARK_INCLUDED          TRUE
+#endif
+
+/* Include HSP State Machine debug trace messages. */
+#ifndef HSP2_FSM_DEBUG
+#define HSP2_FSM_DEBUG              TRUE
+#endif
+
+/* The Module's Inquiry Scan Window. */
+#ifndef HSP2_INQ_SCAN_WINDOW
+#define HSP2_INQ_SCAN_WINDOW        0
+#endif
+
+/* The Module's Inquiry Scan Interval. */
+#ifndef HSP2_INQ_SCAN_INTERVAL
+#define HSP2_INQ_SCAN_INTERVAL      0
+#endif
+
+/* The Module's Page Scan Interval. */
+#ifndef HSP2_PAGE_SCAN_INTERVAL
+#define HSP2_PAGE_SCAN_INTERVAL     0
+#endif
+
+/* The Module's Page Scan Window. */
+#ifndef HSP2_PAGE_SCAN_WINDOW
+#define HSP2_PAGE_SCAN_WINDOW       0
+#endif
+
+/* The Park Mode's Minimum Beacon Period. */
+#ifndef HSP2_BEACON_MIN_PERIOD
+#define HSP2_BEACON_MIN_PERIOD      450
+#endif
+
+/* The Park Mode's Maximum Beacon Period. */
+#ifndef HSP2_BEACON_MAX_PERIOD
+#define HSP2_BEACON_MAX_PERIOD      500
+#endif
+
+/* The duration of the inquiry in seconds. */
+#ifndef HSP2_INQ_DURATION
+#define HSP2_INQ_DURATION           4
+#endif
+
+/* Maximum number of peer responses during an inquiry. */
+#ifndef HSP2_INQ_MAX_NUM_RESPS
+#define HSP2_INQ_MAX_NUM_RESPS      3
+#endif
+
+/* Maximum number of times to retry an inquiry prior to failure. */
+#ifndef HSP2_MAX_INQ_RETRY
+#define HSP2_MAX_INQ_RETRY          6
+#endif
+
+/* Maximum number of times to retry an RFCOMM connection prior to failure. */
+#ifndef HSP2_MAX_CONN_RETRY
+#define HSP2_MAX_CONN_RETRY         3
+#endif
+
+/* If the connect request failed for authentication reasons, do not retry */
+#ifndef HSP2_NO_RETRY_ON_AUTH_FAIL
+#define HSP2_NO_RETRY_ON_AUTH_FAIL  TRUE
+#endif
+
+/* Maximum number of characters in an HSP2 device name. */
+#ifndef HSP2_MAX_NAME_LEN
+#define HSP2_MAX_NAME_LEN           32
+#endif
+
+/* The minimum speaker and/or microphone gain setting. */
+#ifndef HSP2_MIN_GAIN
+#define HSP2_MIN_GAIN               0
+#endif
+
+/* The maximum speaker and/or microphone setting. */
+#ifndef HSP2_MAX_GAIN
+#define HSP2_MAX_GAIN               15
+#endif
+
+/* The default value to send on an AT+CKPD. */
+#ifndef HSP2_KEYPRESS_DEFAULT
+#define HSP2_KEYPRESS_DEFAULT       200
+#endif
+
+/* Maximum amount a data that can be received per RFCOMM frame. */
+#ifndef HSP2_MAX_RFC_READ_LEN
+#define HSP2_MAX_RFC_READ_LEN       128
+#endif
+
+/* The time in seconds to wait for completion of a partial AT command or response from the peer. */
+#ifndef HSP2_AT_TO_INTERVAL
+#define HSP2_AT_TO_INTERVAL         30
+#endif
+
+/* The time to wait before repeating a ring to a peer Headset. */
+#ifndef HSP2_REPEAT_RING_TO
+#define HSP2_REPEAT_RING_TO         4
+#endif
+
+/* Time to wait for a response for an AT command */
+#ifndef HSP2_AT_RSP_TO
+#define HSP2_AT_RSP_TO              20
+#endif
+
+/* SCO packet type(s) to use (bitmask: see spec), 0 - device default (recommended) */
+#ifndef HSP2_SCO_PKT_TYPES
+#define HSP2_SCO_PKT_TYPES          ((UINT16)0x0000)
+#endif
+
+/* The default settings of the SCO voice link. */
+#ifndef HSP2_DEFAULT_VOICE_SETTINGS
+#define HSP2_DEFAULT_VOICE_SETTINGS (HCI_INP_CODING_LINEAR | HCI_INP_DATA_FMT_2S_COMPLEMENT | HCI_INP_SAMPLE_SIZE_16BIT | HCI_AIR_CODING_FORMAT_CVSD)
+#endif
+
+#ifndef HSP2_MAX_AT_CMD_LENGTH
+#define HSP2_MAX_AT_CMD_LENGTH       16
+#endif
+
+#ifndef HSP2_MAX_AT_VAL_LENGTH
+#if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE)
+#define HSP2_MAX_AT_VAL_LENGTH       310
+#else
+#define HSP2_MAX_AT_VAL_LENGTH       5
+#endif
+#endif
+
+
+#ifndef HSP2_SDP_DB_SIZE
+#define HSP2_SDP_DB_SIZE             300
+#endif
+
+
+/******************************************************************************
+**
+** HFP
+**
+******************************************************************************/
+
+#ifndef HFP_INCLUDED
+#define HFP_INCLUDED                FALSE
+#endif
+
+/* Include Audio Gateway specific code. */
+#ifndef HFP_AG_INCLUDED
+#define HFP_AG_INCLUDED             TRUE
+#endif
+
+/* Include Hand Free Specific Code. */
+#ifndef HFP_HF_INCLUDED
+#define HFP_HF_INCLUDED             TRUE
+#endif
+
+/* Use AT interface instead of full blown API */
+#ifndef AT_INTERFACE
+#define AT_INTERFACE            FALSE
+#endif
+
+/* HFP Manages SCO establishement for various procedures */
+#ifndef HFP_SCO_MGMT_INCLUDED
+#define HFP_SCO_MGMT_INCLUDED             TRUE
+#endif
+
+/* CCAP compliant features and behavior desired */
+#ifndef CCAP_COMPLIANCE
+#define CCAP_COMPLIANCE             TRUE
+#endif
+
+/* Caller ID string, part of +CLIP result code */
+#ifndef HFP_MAX_CLIP_INFO
+#define HFP_MAX_CLIP_INFO             45
+#endif
+
+#ifndef HFP_RPT_PEER_INFO_INCLUDED
+#define HFP_RPT_PEER_INFO_INCLUDED  TRUE  /* Reporting of peer features enabled */
+#endif
+
+/******************************************************************************
+**
+** HID
+**
+******************************************************************************/
+
+/* HID Device Role Included */
+#ifndef HID_DEV_INCLUDED
+#define HID_DEV_INCLUDED             FALSE
+#endif
+
+#ifndef HID_DEV_PM_INCLUDED
+#define HID_DEV_PM_INCLUDED         TRUE
+#endif
+
+/* The HID Device is a virtual cable */
+#ifndef HID_DEV_VIRTUAL_CABLE
+#define HID_DEV_VIRTUAL_CABLE       TRUE
+#endif
+
+/* The HID device initiates the reconnections */
+#ifndef HID_DEV_RECONN_INITIATE
+#define HID_DEV_RECONN_INITIATE     TRUE
+#endif
+
+/* THe HID device is normally connectable */
+#ifndef HID_DEV_NORMALLY_CONN
+#define HID_DEV_NORMALLY_CONN       FALSE
+#endif
+
+/* The device is battery powered */
+#ifndef HID_DEV_BATTERY_POW
+#define HID_DEV_BATTERY_POW         TRUE
+#endif
+
+/* Device is capable of waking up the host */
+#ifndef HID_DEV_REMOTE_WAKE
+#define HID_DEV_REMOTE_WAKE         TRUE
+#endif
+
+/* Device needs host to close SDP channel after SDP is over */
+#ifndef HID_DEV_SDP_DISABLE
+#define HID_DEV_SDP_DISABLE         TRUE
+#endif
+
+#ifndef HID_DEV_MTU_SIZE
+#define HID_DEV_MTU_SIZE                 64
+#endif
+
+#ifndef HID_DEV_FLUSH_TO
+#define HID_DEV_FLUSH_TO                 0xffff
+#endif
+
+#ifndef HID_DEV_PAGE_SCAN_WIN
+#define HID_DEV_PAGE_SCAN_WIN       (0)
+#endif
+
+#ifndef HID_DEV_PAGE_SCAN_INT
+#define HID_DEV_PAGE_SCAN_INT       (0)
+#endif
+
+#ifndef HID_DEV_MAX_CONN_RETRY
+#define HID_DEV_MAX_CONN_RETRY      (15)
+#endif
+
+#ifndef HID_DEV_REPAGE_WIN
+#define HID_DEV_REPAGE_WIN          (1)
+#endif
+
+#ifndef HID_DEV_SVC_NAME
+#define HID_DEV_SVC_NAME            "HID"
+#endif
+
+#ifndef HID_DEV_SVC_DESCR
+#define HID_DEV_SVC_DESCR           "3-button mouse and keyboard"
+#endif
+
+#ifndef HID_DEV_PROVIDER_NAME
+#define HID_DEV_PROVIDER_NAME       "Widcomm"
+#endif
+
+#ifndef HID_DEV_REL_NUM
+#define HID_DEV_REL_NUM             0x0100
+#endif
+
+#ifndef HID_DEV_PARSER_VER
+#define HID_DEV_PARSER_VER          0x0111
+#endif
+
+#ifndef HID_DEV_SUBCLASS
+#define HID_DEV_SUBCLASS            COD_MINOR_POINTING
+#endif
+
+#ifndef HID_DEV_COUNTRY_CODE
+#define HID_DEV_COUNTRY_CODE        0x33
+#endif
+
+#ifndef HID_DEV_SUP_TOUT
+#define HID_DEV_SUP_TOUT            0x8000
+#endif
+
+#ifndef HID_DEV_NUM_LANGS
+#define HID_DEV_NUM_LANGS           1
+#endif
+
+#ifndef HID_DEV_INACT_TIMEOUT
+#define HID_DEV_INACT_TIMEOUT       60
+#endif
+
+#ifndef HID_DEV_BUSY_MODE_PARAMS
+#define HID_DEV_BUSY_MODE_PARAMS    { 320, 160, 10, 20, HCI_MODE_ACTIVE }
+#endif
+
+#ifndef HID_DEV_IDLE_MODE_PARAMS
+#define HID_DEV_IDLE_MODE_PARAMS    { 320, 160, 10, 20, HCI_MODE_SNIFF }
+#endif
+
+#ifndef HID_DEV_SUSP_MODE_PARAMS
+#define HID_DEV_SUSP_MODE_PARAMS    { 640, 320,  0,    0, HCI_MODE_PARK }
+#endif
+
+#ifndef HID_DEV_MAX_DESCRIPTOR_SIZE
+#define HID_DEV_MAX_DESCRIPTOR_SIZE      128     /* Max descriptor size          */
+#endif
+
+#ifndef HID_DEV_LANGUAGELIST
+#define HID_DEV_LANGUAGELIST             {0x35, 0x06, 0x09, 0x04, 0x09, 0x09, 0x01, 0x00}
+#endif
+
+#ifndef HID_DEV_LINK_SUPERVISION_TO
+#define HID_DEV_LINK_SUPERVISION_TO      0x8000
+#endif
+
+#ifndef HID_CONTROL_POOL_ID
+#define HID_CONTROL_POOL_ID             2
+#endif
+
+#ifndef HID_INTERRUPT_POOL_ID
+#define HID_INTERRUPT_POOL_ID           2
+#endif
+
+/*************************************************************************
+** Definitions for Both HID-Host & Device
+*/
+#ifndef HID_MAX_SVC_NAME_LEN
+#define HID_MAX_SVC_NAME_LEN  32
+#endif
+
+#ifndef HID_MAX_SVC_DESCR_LEN
+#define HID_MAX_SVC_DESCR_LEN 32
+#endif
+
+#ifndef HID_MAX_PROV_NAME_LEN
+#define HID_MAX_PROV_NAME_LEN 32
+#endif
+
+/*************************************************************************
+** Definitions for HID-Host
+*/
+#ifndef  HID_HOST_INCLUDED
+#define HID_HOST_INCLUDED           TRUE
+#endif
+
+#ifndef HID_HOST_MAX_DEVICES
+#define HID_HOST_MAX_DEVICES        7
+#endif
+
+#ifndef HID_HOST_MTU
+#define HID_HOST_MTU                640
+#endif
+
+#ifndef HID_HOST_FLUSH_TO
+#define HID_HOST_FLUSH_TO                 0xffff
+#endif
+
+#ifndef HID_HOST_MAX_CONN_RETRY
+#define HID_HOST_MAX_CONN_RETRY     (3)
+#endif
+
+#ifndef HID_HOST_REPAGE_WIN
+#define HID_HOST_REPAGE_WIN          (2)
+#endif
+
+
+/******************************************************************************
+**
+** DUN and FAX
+**
+******************************************************************************/
+
+#ifndef DUN_INCLUDED
+#define DUN_INCLUDED                FALSE
+#endif
+
+
+/******************************************************************************
+**
+** GOEP
+**
+******************************************************************************/
+
+#ifndef GOEP_INCLUDED
+#define GOEP_INCLUDED               FALSE
+#endif
+
+/* This is set to enable GOEP non-blocking file system access functions. */
+#ifndef GOEP_FS_INCLUDED
+#define GOEP_FS_INCLUDED        FALSE
+#endif
+
+/* GOEP authentication key size. */
+#ifndef GOEP_MAX_AUTH_KEY_SIZE
+#define GOEP_MAX_AUTH_KEY_SIZE      16
+#endif
+
+/* Maximum size of the realm authentication string. */
+#ifndef GOEP_MAX_AUTH_REALM_SIZE
+#define GOEP_MAX_AUTH_REALM_SIZE    16
+#endif
+
+/* Realm Character Set */
+#ifndef GOEP_REALM_CHARSET
+#define GOEP_REALM_CHARSET          0       /* ASCII */
+#endif
+
+/* This is set to the maximum length of path name allowed in the system (_MAX_PATH). */
+#ifndef GOEP_MAX_PATH_SIZE
+#define GOEP_MAX_PATH_SIZE          255
+#endif
+
+/* Specifies whether or not client's user id is required during obex authentication */
+#ifndef GOEP_SERVER_USERID_REQUIRED
+#define GOEP_SERVER_USERID_REQUIRED FALSE
+#endif
+
+/* This is set to the maximum length of file name allowed in the system (_MAX_FNAME). */
+#ifndef GOEP_MAX_FILE_SIZE
+#define GOEP_MAX_FILE_SIZE          128
+#endif
+
+/* Character used as path separator */
+#ifndef GOEP_PATH_SEPARATOR
+#define GOEP_PATH_SEPARATOR         ((char) 0x5c)   /* 0x2f ('/'), or 0x5c ('\') */
+#endif
+
+/******************************************************************************
+**
+** OPP
+**
+******************************************************************************/
+
+#ifndef OPP_INCLUDED
+#define OPP_INCLUDED                FALSE
+#endif
+
+/* This is set to enable OPP client capabilities. */
+#ifndef OPP_CLIENT_INCLUDED
+#define OPP_CLIENT_INCLUDED         FALSE
+#endif
+
+/* This is set to enable OPP server capabilities. */
+#ifndef OPP_SERVER_INCLUDED
+#define OPP_SERVER_INCLUDED         FALSE
+#endif
+
+/* if the optional formating functions are to be included or not */
+#ifndef OPP_FORMAT_INCLUDED
+#define OPP_FORMAT_INCLUDED         FALSE
+#endif
+
+/* Maximum number of client sessions allowed by server */
+#ifndef OPP_MAX_SRVR_SESS
+#define OPP_MAX_SRVR_SESS           3
+#endif
+
+/******************************************************************************
+**
+** FTP
+**
+******************************************************************************/
+
+#ifndef FTP_INCLUDED
+#define FTP_INCLUDED                FALSE
+#endif
+
+/* This is set to enable FTP client capabilities. */
+#ifndef FTP_CLIENT_INCLUDED
+#define FTP_CLIENT_INCLUDED         TRUE
+#endif
+
+/* This is set to enable FTP server capabilities. */
+#ifndef FTP_SERVER_INCLUDED
+#define FTP_SERVER_INCLUDED         TRUE
+#endif
+
+/******************************************************************************
+**
+** XML Parser
+**
+******************************************************************************/
+
+#ifndef XML_STACK_SIZE
+#define XML_STACK_SIZE             7
+#endif
+
+/******************************************************************************
+**
+** BPP Printer
+**
+******************************************************************************/
+#ifndef BPP_DEBUG
+#define BPP_DEBUG            FALSE
+#endif
+
+#ifndef BPP_INCLUDED
+#define BPP_INCLUDED                FALSE
+#endif
+
+#ifndef BPP_SND_INCLUDED
+#define BPP_SND_INCLUDED            FALSE
+#endif
+
+/* Maximum number of senders allowed to connect simultaneously
+** The maximum is 6 or (OBX_NUM_SERVERS / 2), whichever is smaller
+*/
+#ifndef BPP_PR_MAX_CON
+#define BPP_PR_MAX_CON         3
+#endif
+
+/* Service Name. maximum length: 248
+#ifndef BPP_SERVICE_NAME
+#define BPP_SERVICE_NAME            "Basic Printing"
+#endif
+ */
+/* Document Format Supported. ASCII comma-delimited list of MIME type:version string
+#ifndef BPP_DOC_FORMAT_SUPPORTED
+#define BPP_DOC_FORMAT_SUPPORTED    "application/vnd.pwg-xhtml-print:1.0,application/vnd.hp-PCL:5E,application/PDF"
+#endif
+
+#ifndef BPP_DOC_FORMAT_SUPPORTED_LEN
+#define BPP_DOC_FORMAT_SUPPORTED_LEN    77
+#endif
+ */
+/* Character repertoires.
+#ifndef BPP_CHARACTER_REPERTOIRES
+#define BPP_CHARACTER_REPERTOIRES {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01}
+#endif
+ */
+/* XHTML formats.
+#ifndef BPP_XHTML_PRINT_FORMATS
+#define BPP_XHTML_PRINT_FORMATS     "image/gif:89A,image/jpeg"
+#endif
+
+#ifndef BPP_XHTML_PRINT_FORMATS_LEN
+#define BPP_XHTML_PRINT_FORMATS_LEN 24
+#endif
+ */
+/* Color supported.
+#ifndef BPP_COLOR_SUPORTED
+#define BPP_COLOR_SUPORTED          FALSE
+#endif
+ */
+/* 1284 ID string. First 2 bytes are the length.
+#ifndef BPP_1284ID
+#define BPP_1284ID                  "\x00\x48MANUFACTURER:ACME Manufacturing;COMMAND SET:PCL,MPL;MODEL:LaserBeam \?;"
+#endif
+
+#ifndef BPP_1284ID_LEN
+#define BPP_1284ID_LEN              72
+#endif
+ */
+/* Printer name.
+#ifndef BPP_PRINTER_NAME
+#define BPP_PRINTER_NAME            "My Printer"
+#endif
+
+#ifndef BPP_PRINTER_NAME_LEN
+#define BPP_PRINTER_NAME_LEN        10
+#endif
+ */
+
+/* Printer location.
+#ifndef BPP_PRINTER_LOCATION
+#define BPP_PRINTER_LOCATION        "Hotel Lobby"
+#endif
+
+#ifndef BPP_PRINTER_LOCATION_LEN
+#define BPP_PRINTER_LOCATION_LEN    11
+#endif
+ */
+/* Duplex printing supported.
+#ifndef BPP_DUPLEX_SUPPORTED
+#define BPP_DUPLEX_SUPPORTED        TRUE
+#endif
+ */
+
+/* Media types supported.
+#ifndef BPP_MEDIA_TYPES_SUPPORTED
+#define BPP_MEDIA_TYPES_SUPPORTED   "stationary,continuous-long,photographic-high-gloss,cardstock"
+#endif
+
+#ifndef BPP_MEDIA_TYPES_SUPPORTED_LEN
+#define BPP_MEDIA_TYPES_SUPPORTED_LEN   60
+#endif
+ */
+/* Maximum media with supported.
+#ifndef BPP_MAX_MEDIA_WIDTH
+#define BPP_MAX_MEDIA_WIDTH         205
+#endif
+ */
+/* Maximum media length supported.
+#ifndef BPP_MAX_MEDIA_LENGTH
+#define BPP_MAX_MEDIA_LENGTH        285
+#endif
+ */
+/* the maximum string len for the media size of medium loaded */
+#ifndef BPP_MEDIA_SIZE_LEN
+#define BPP_MEDIA_SIZE_LEN          33
+#endif
+
+/* Debug Trace the SOAP object, if TRUE */
+#ifndef BPP_TRACE_XML
+#define BPP_TRACE_XML               TRUE
+#endif
+
+/* in case that the SOAP object does not all come in one OBEX packet,
+ * this size of data may be kept in the BPP control block for continuing parsing.
+ * The maximum is the size of the biggest GKI buffer (GKI_MAX_BUF_SIZE) */
+#ifndef BPP_SOAP_KEEP_SIZE
+#define BPP_SOAP_KEEP_SIZE          200
+#endif
+
+
+/******************************************************************************
+**
+** BIP
+**
+******************************************************************************/
+#ifndef BIP_INCLUDED
+#define BIP_INCLUDED                FALSE
+#endif
+
+/* TRUE to include imaging initiator */
+#ifndef BIP_INITR_INCLUDED
+#define BIP_INITR_INCLUDED          FALSE
+#endif
+
+/* TRUE to include imaging responder */
+#ifndef BIP_RSPDR_INCLUDED
+#define BIP_RSPDR_INCLUDED          FALSE
+#endif
+
+/* TRUE to include image push feature */
+#ifndef BIP_PUSH_INCLUDED
+#define BIP_PUSH_INCLUDED           TRUE
+#endif
+
+/* TRUE to include image pull feature */
+#ifndef BIP_PULL_INCLUDED
+#define BIP_PULL_INCLUDED           TRUE
+#endif
+
+/* TRUE to include advanced image printing feature */
+#ifndef BIP_PRINTING_INCLUDED
+#define BIP_PRINTING_INCLUDED       TRUE
+#endif
+
+/* TRUE to include automatic archive feature */
+#ifndef BIP_ARCHIVE_INCLUDED
+#define BIP_ARCHIVE_INCLUDED        TRUE
+#endif
+
+/* TRUE to include remote camera feature */
+#ifndef BIP_CAMERA_INCLUDED
+#define BIP_CAMERA_INCLUDED         TRUE
+#endif
+
+/* TRUE to include remote display feature */
+#ifndef BIP_DISPLAY_INCLUDED
+#define BIP_DISPLAY_INCLUDED        TRUE
+#endif
+
+/* TRUE to include sanity check code for API functions */
+#ifndef BIP_SANITY_CHECKS
+#define BIP_SANITY_CHECKS           TRUE
+#endif
+
+/* TRUE to show the received XML object in trace for conformance tests */
+#ifndef BIP_TRACE_XML
+#define BIP_TRACE_XML               TRUE
+#endif
+
+/* in case that the received XML object is not complete, the XML parser state machine needs
+ * to keep a copy of the data from the last '<'
+ * This macro specifies the maximun amount of data for this purpose */
+#ifndef BIP_XML_CARRY_OVER_LEN
+#define BIP_XML_CARRY_OVER_LEN      100
+#endif
+
+/* minimum 4, maximum is 255. The value should be set to the maximum size of encoding string + 1. JPEG2000.
+ * If vendor specific format is supported, it might be bigger than 9 */
+#ifndef BIP_IMG_ENCODE_SIZE
+#define BIP_IMG_ENCODE_SIZE         9
+#endif
+
+/* MIME type: text/plain */
+#ifndef BIP_TYPE_SIZE
+#define BIP_TYPE_SIZE               20
+#endif
+
+/* example: iso-8895-1 */
+#ifndef BIP_CHARSET_SIZE
+#define BIP_CHARSET_SIZE            10
+#endif
+
+/* friendly name */
+#ifndef BIP_FNAME_SIZE
+#define BIP_FNAME_SIZE              20
+#endif
+
+/* service name */
+#ifndef BIP_SNAME_SIZE
+#define BIP_SNAME_SIZE              60
+#endif
+
+/* temporary storage file name(for file system access, may include path) */
+#ifndef BIP_TEMP_NAME_SIZE
+#define BIP_TEMP_NAME_SIZE          200
+#endif
+
+/* image file name */
+#ifndef BIP_IMG_NAME_SIZE
+#define BIP_IMG_NAME_SIZE           200
+#endif
+
+/* attachment file name */
+#ifndef BIP_ATT_NAME_SIZE
+#define BIP_ATT_NAME_SIZE           200
+#endif
+
+/* object (image, attachment, thumbnail) file name (may be used for file system) */
+#ifndef BIP_OBJ_NAME_SIZE
+#define BIP_OBJ_NAME_SIZE           200
+#endif
+
+
+
+/******************************************************************************
+**
+** HCRP
+**
+******************************************************************************/
+
+#ifndef HCRP_INCLUDED
+#define HCRP_INCLUDED               FALSE
+#endif
+
+/* This is set to enable server. */
+#ifndef HCRP_SERVER_INCLUDED
+#define HCRP_SERVER_INCLUDED       FALSE
+#endif
+
+/* This is set to enable client. */
+#ifndef HCRP_CLIENT_INCLUDED
+#define HCRP_CLIENT_INCLUDED        FALSE
+#endif
+
+/* TRUE enables the notification option of the profile. */
+#ifndef HCRP_NOTIFICATION_INCLUDED
+#define HCRP_NOTIFICATION_INCLUDED  TRUE
+#endif
+
+/* TRUE enables the vendor specific option of the profile. */
+#ifndef HCRP_VENDOR_SPEC_INCLUDED
+#define HCRP_VENDOR_SPEC_INCLUDED   TRUE
+#endif
+
+/* TRUE enables state machine traces. */
+#ifndef HCRP_FSM_DEBUG
+#define HCRP_FSM_DEBUG              FALSE
+#endif
+
+/* TRUE enables protocol message traces. */
+#ifndef HCRP_PROTO_DEBUG
+#define HCRP_PROTO_DEBUG            FALSE
+#endif
+
+/* Maximum length used to store the service name (Minimum 1). */
+#ifndef HCRP_MAX_SERVICE_NAME_LEN
+#define HCRP_MAX_SERVICE_NAME_LEN   32
+#endif
+
+/* Maximum length used to store the device name (Minimum 1). */
+#ifndef HCRP_MAX_DEVICE_NAME_LEN
+#define HCRP_MAX_DEVICE_NAME_LEN    32
+#endif
+
+/* Maximum length of device location (Minimum 1) */
+#ifndef HCRP_MAX_DEVICE_LOC_LEN
+#define HCRP_MAX_DEVICE_LOC_LEN     32
+#endif
+
+/* Maximum length used to store the friendly name (Minimum 1). */
+#ifndef HCRP_MAX_FRIENDLY_NAME_LEN
+#define HCRP_MAX_FRIENDLY_NAME_LEN  32
+#endif
+
+/* Maximum length used to store the 1284 id string (Minimum 2 byte length field). */
+#ifndef HCRP_MAX_SDP_1284_ID_LEN
+#define HCRP_MAX_SDP_1284_ID_LEN    128
+#endif
+
+/* Maximum length for parameters to be processed for vendor specific commands. */
+#ifndef HCRP_MAX_VEND_SPEC_LEN
+#define HCRP_MAX_VEND_SPEC_LEN      4
+#endif
+
+/* Number of seconds to wait for 2nd GAP to open. */
+#ifndef HCRP_OPEN_CHAN_TOUT
+#define HCRP_OPEN_CHAN_TOUT         5
+#endif
+
+/* Number of seconds to wait for 2nd GAP to close. */
+#ifndef HCRP_CLOSE_CHAN_TOUT
+#define HCRP_CLOSE_CHAN_TOUT        3
+#endif
+
+/* Number of seconds to wait for the application to respond to a protocol request. */
+#ifndef HCRP_APPL_RSP_TOUT
+#define HCRP_APPL_RSP_TOUT          5
+#endif
+
+/* Number of seconds to wait for the peer device to respond to a protocol request. */
+#ifndef HCRP_CMD_RSP_TOUT
+#define HCRP_CMD_RSP_TOUT           7
+#endif
+
+/* Number of seconds between subsequent credit requests to the server when the send watermark has been exceeded. */
+#ifndef HCRP_CREDIT_REQ_UPDATES
+#define HCRP_CREDIT_REQ_UPDATES     1
+#endif
+
+/* Maximum number of results to return in a HCRP_FindServices search. */
+#ifndef HCRP_MAX_SEARCH_RESULTS
+#define HCRP_MAX_SEARCH_RESULTS     1
+#endif
+
+/* Maximum number of bytes to be reserved for searching for the client's notification record. */
+#ifndef HCRP_MAX_NOTIF_DISC_BUF
+#define HCRP_MAX_NOTIF_DISC_BUF     300
+#endif
+
+/* Maximum number of clients the server will allow to be registered for notifications. */
+#ifndef HCRP_MAX_NOTIF_CLIENTS
+#define HCRP_MAX_NOTIF_CLIENTS      3
+#endif
+
+/* Spec says minimum of two notification retries. */
+#ifndef HCRP_NOTIF_NUM_RETRIES
+#define HCRP_NOTIF_NUM_RETRIES      4
+#endif
+
+/*************************************************************************
+** Definitions for Multi-Client Server HCRP
+** Note: Many of the above HCRP definitions are also used
+** Maximum number of clients allowed to connect simultaneously
+** Must be less than ((GAP_MAX_CONNECTIONS - 1) / 2)
+*/
+#ifndef HCRPM_MAX_CLIENTS
+#define HCRPM_MAX_CLIENTS           3
+#endif
+
+
+/******************************************************************************
+**
+** PAN
+**
+******************************************************************************/
+
+#ifndef PAN_INCLUDED
+#define PAN_INCLUDED                FALSE
+#endif
+
+
+/******************************************************************************
+**
+** SAP
+**
+******************************************************************************/
+
+#ifndef SAP_SERVER_INCLUDED
+#define SAP_SERVER_INCLUDED         FALSE
+#endif
+
+
+/*************************************************************************
+ * A2DP Definitions
+ */
+#ifndef A2D_INCLUDED
+#define A2D_INCLUDED            TRUE
+#endif
+
+/* TRUE to include SBC utility functions */
+#ifndef A2D_SBC_INCLUDED
+#define A2D_SBC_INCLUDED        A2D_INCLUDED
+#endif
+
+/* TRUE to include MPEG-1,2 (mp3) utility functions */
+#ifndef A2D_M12_INCLUDED
+#define A2D_M12_INCLUDED        A2D_INCLUDED
+#endif
+
+/* TRUE to include MPEG-2,4 (aac) utility functions */
+#ifndef A2D_M24_INCLUDED
+#define A2D_M24_INCLUDED        A2D_INCLUDED
+#endif
+
+/******************************************************************************
+**
+** AVCTP
+**
+******************************************************************************/
+
+#ifndef AVCT_INCLUDED
+#define AVCT_INCLUDED               TRUE
+#endif
+
+/* Number of simultaneous ACL links to different peer devices. */
+#ifndef AVCT_NUM_LINKS
+#define AVCT_NUM_LINKS              2
+#endif
+
+/* Number of simultaneous AVCTP connections. */
+#ifndef AVCT_NUM_CONN
+#define AVCT_NUM_CONN               3
+#endif
+
+/* Pool ID where to reassemble the SDU.
+   This Pool allows buffers to be used that are larger than
+   the L2CAP_MAX_MTU. */
+#ifndef AVCT_BR_USER_RX_POOL_ID
+#define AVCT_BR_USER_RX_POOL_ID     HCI_ACL_POOL_ID
+#endif
+
+/* Pool ID where to hold the SDU.
+   This Pool allows buffers to be used that are larger than
+   the L2CAP_MAX_MTU. */
+#ifndef AVCT_BR_USER_TX_POOL_ID
+#define AVCT_BR_USER_TX_POOL_ID     HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef AVCT_BR_FCR_RX_POOL_ID
+#define AVCT_BR_FCR_RX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note:  This pool needs to have enough buffers to hold two times the window size negotiated
+ in the tL2CAP_FCR_OPTIONS (2 * tx_win_size)  to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef AVCT_BR_FCR_TX_POOL_ID
+#define AVCT_BR_FCR_TX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/* AVCTP Browsing channel FCR Option:
+Size of the transmission window when using enhanced retransmission mode. Not used
+in basic and streaming modes. Range: 1 - 63
+*/
+#ifndef AVCT_BR_FCR_OPT_TX_WINDOW_SIZE
+#define AVCT_BR_FCR_OPT_TX_WINDOW_SIZE      10
+#endif
+
+/* AVCTP Browsing channel FCR Option:
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT
+#define AVCT_BR_FCR_OPT_MAX_TX_B4_DISCNT    20
+#endif
+
+/* AVCTP Browsing channel FCR Option: Retransmission Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 2000 (2 secs) when supporting PBF.
+ */
+#ifndef AVCT_BR_FCR_OPT_RETX_TOUT
+#define AVCT_BR_FCR_OPT_RETX_TOUT           2000
+#endif
+
+/* AVCTP Browsing channel FCR Option: Monitor Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 12000 (12 secs) when supporting PBF.
+*/
+#ifndef AVCT_BR_FCR_OPT_MONITOR_TOUT
+#define AVCT_BR_FCR_OPT_MONITOR_TOUT        12000
+#endif
+
+/******************************************************************************
+**
+** AVRCP
+**
+******************************************************************************/
+
+#ifndef AVRC_INCLUDED
+#define AVRC_INCLUDED               TRUE
+#endif
+
+/******************************************************************************
+**
+** MCAP
+**
+******************************************************************************/
+#ifndef MCA_INCLUDED
+#define MCA_INCLUDED                FALSE
+#endif
+
+/* TRUE to support Clock Synchronization OpCodes */
+#ifndef MCA_SYNC_INCLUDED
+#define MCA_SYNC_INCLUDED           FALSE
+#endif
+
+/* The MTU size for the L2CAP configuration on control channel. 48 is the minimal */
+#ifndef MCA_CTRL_MTU
+#define MCA_CTRL_MTU    60
+#endif
+
+/* The maximum number of registered MCAP instances. */
+#ifndef MCA_NUM_REGS
+#define MCA_NUM_REGS    3
+#endif
+
+/* The maximum number of control channels (to difference devices) per registered MCAP instances. */
+#ifndef MCA_NUM_LINKS
+#define MCA_NUM_LINKS   3
+#endif
+
+/* The maximum number of MDEP (including HDP echo) per registered MCAP instances. */
+#ifndef MCA_NUM_DEPS
+#define MCA_NUM_DEPS    3
+#endif
+
+/* The maximum number of MDL link per control channel. */
+#ifndef MCA_NUM_MDLS
+#define MCA_NUM_MDLS    4
+#endif
+
+/* Pool ID where to reassemble the SDU. */
+#ifndef MCA_USER_RX_POOL_ID
+#define MCA_USER_RX_POOL_ID     HCI_ACL_POOL_ID
+#endif
+
+/* Pool ID where to hold the SDU. */
+#ifndef MCA_USER_TX_POOL_ID
+#define MCA_USER_TX_POOL_ID     HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments during SDU reassembly
+*/
+#ifndef MCA_FCR_RX_POOL_ID
+#define MCA_FCR_RX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/*
+GKI Buffer Pool ID used to hold MPS segments used in (re)transmissions.
+L2CAP_DEFAULT_ERM_POOL_ID is specified to use the HCI ACL data pool.
+Note:  This pool needs to have enough buffers to hold two times the window size negotiated
+ in the tL2CAP_FCR_OPTIONS (2 * tx_win_size)  to allow for retransmissions.
+ The size of each buffer must be able to hold the maximum MPS segment size passed in
+ tL2CAP_FCR_OPTIONS plus BT_HDR (8) + HCI preamble (4) + L2CAP_MIN_OFFSET (11 - as of BT 2.1 + EDR Spec).
+*/
+#ifndef MCA_FCR_TX_POOL_ID
+#define MCA_FCR_TX_POOL_ID      HCI_ACL_POOL_ID
+#endif
+
+/* MCAP control channel FCR Option:
+Size of the transmission window when using enhanced retransmission mode.
+1 is defined by HDP specification for control channel.
+*/
+#ifndef MCA_FCR_OPT_TX_WINDOW_SIZE
+#define MCA_FCR_OPT_TX_WINDOW_SIZE      1
+#endif
+
+/* MCAP control channel FCR Option:
+Number of transmission attempts for a single I-Frame before taking
+Down the connection. Used In ERTM mode only. Value is Ignored in basic and
+Streaming modes.
+Range: 0, 1-0xFF
+0 - infinite retransmissions
+1 - single transmission
+*/
+#ifndef MCA_FCR_OPT_MAX_TX_B4_DISCNT
+#define MCA_FCR_OPT_MAX_TX_B4_DISCNT    20
+#endif
+
+/* MCAP control channel FCR Option: Retransmission Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost I-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 2000 (2 secs) when supporting PBF.
+ */
+#ifndef MCA_FCR_OPT_RETX_TOUT
+#define MCA_FCR_OPT_RETX_TOUT           2000
+#endif
+
+/* MCAP control channel FCR Option: Monitor Timeout
+The AVRCP specification set a value in the range of 300 - 2000 ms
+Timeout (in msecs) to detect Lost S-Frames. Only used in Enhanced retransmission mode.
+Range: Minimum 12000 (12 secs) when supporting PBF.
+*/
+#ifndef MCA_FCR_OPT_MONITOR_TOUT
+#define MCA_FCR_OPT_MONITOR_TOUT        12000
+#endif
+
+/* MCAP control channel FCR Option: Maximum PDU payload size.
+The maximum number of payload octets that the local device can receive in a single PDU.
+*/
+#ifndef MCA_FCR_OPT_MPS_SIZE
+#define MCA_FCR_OPT_MPS_SIZE            1000
+#endif
+
+/* Shared transport */
+#ifndef NFC_SHARED_TRANSPORT_ENABLED
+#define NFC_SHARED_TRANSPORT_ENABLED    FALSE
+#endif
+
+/******************************************************************************
+**
+** SER
+**
+******************************************************************************/
+
+#ifndef SER_INCLUDED
+#define SER_INCLUDED                FALSE
+#endif
+
+/* Task which runs the serial application. */
+#ifndef SER_TASK
+#define SER_TASK                    BTE_APPL_TASK
+#endif
+
+/* Mailbox used by serial application. */
+#ifndef SER_MBOX
+#define SER_MBOX                    TASK_MBOX_1
+#endif
+
+/* Mailbox mask. */
+#ifndef SER_MBOX_MASK
+#define SER_MBOX_MASK               TASK_MBOX_1_EVT_MASK
+#endif
+
+/* TX path application event. */
+#ifndef SER_TX_PATH_APPL_EVT
+#define SER_TX_PATH_APPL_EVT        EVENT_MASK(APPL_EVT_3)
+#endif
+
+/* RX path application event. */
+#ifndef SER_RX_PATH_APPL_EVT
+#define SER_RX_PATH_APPL_EVT        EVENT_MASK(APPL_EVT_4)
+#endif
+
+/******************************************************************************
+**
+** Sleep Mode (Low Power Mode)
+**
+******************************************************************************/
+
+#ifndef HCILP_INCLUDED
+#define HCILP_INCLUDED                  TRUE
+#endif
+
+/******************************************************************************
+**
+** RPC
+**
+******************************************************************************/
+
+#ifndef RPC_INCLUDED
+#define RPC_INCLUDED                FALSE
+#endif
+
+/* RPCT task mailbox ID for messages coming from rpcgen code. */
+#ifndef RPCT_MBOX
+#define RPCT_MBOX                   TASK_MBOX_0
+#endif
+
+/* RPCT task event for mailbox. */
+#ifndef RPCT_RPC_MBOX_EVT
+#define RPCT_RPC_MBOX_EVT           TASK_MBOX_0_EVT_MASK
+#endif
+
+/* RPCT task event from driver indicating RX data is ready. */
+#ifndef RPCT_RX_READY_EVT
+#define RPCT_RX_READY_EVT           APPL_EVT_0
+#endif
+
+/* RPCT task event from driver indicating data TX is done. */
+#ifndef RPCT_TX_DONE_EVT
+#define RPCT_TX_DONE_EVT            APPL_EVT_1
+#endif
+
+/* RPCT task event indicating data is in the circular buffer. */
+#ifndef RPCT_UCBUF_EVT
+#define RPCT_UCBUF_EVT              APPL_EVT_2
+#endif
+
+/* Task ID of RPCGEN task. */
+#ifndef RPCGEN_TASK
+#define RPCGEN_TASK                 BTU_TASK
+#endif
+
+/* RPCGEN task event for messages coming from RPCT. */
+#ifndef RPCGEN_MSG_EVT
+#define RPCGEN_MSG_EVT              TASK_MBOX_1_EVT_MASK
+#endif
+
+#ifndef RPCGEN_MSG_MBOX
+#define RPCGEN_MSG_MBOX             TASK_MBOX_1
+#endif
+
+/* Size of circular buffer used to store diagnostic messages. */
+#ifndef RPCT_UCBUF_SIZE
+#define RPCT_UCBUF_SIZE             2000
+#endif
+
+/******************************************************************************
+**
+** SAP - Sample applications
+**
+******************************************************************************/
+
+#ifndef MMI_INCLUDED
+#define MMI_INCLUDED                FALSE
+#endif
+
+/******************************************************************************
+**
+** APPL - Application Task
+**
+******************************************************************************/
+/* When TRUE indicates that an application task is to be run */
+#ifndef APPL_INCLUDED
+#define APPL_INCLUDED                TRUE
+#endif
+
+/* When TRUE remote terminal code included (RPC MUST be included) */
+#ifndef RSI_INCLUDED
+#define RSI_INCLUDED                TRUE
+#endif
+
+
+
+#define L2CAP_FEATURE_REQ_ID      73
+#define L2CAP_FEATURE_RSP_ID     173
+
+
+#define L2CAP_ENHANCED_FEATURES   0
+
+
+/******************************************************************************
+**
+** BTA
+**
+******************************************************************************/
+/* BTA EIR canned UUID list (default is dynamic) */
+#ifndef BTA_EIR_CANNED_UUID_LIST
+#define BTA_EIR_CANNED_UUID_LIST FALSE
+#endif
+
+/* Number of supported customer UUID in EIR */
+#ifndef BTA_EIR_SERVER_NUM_CUSTOM_UUID
+#define BTA_EIR_SERVER_NUM_CUSTOM_UUID     8
+#endif
+
+/* CHLD override for bluedroid */
+#ifndef BTA_AG_CHLD_VAL_ECC
+#define BTA_AG_CHLD_VAL_ECC  "(0,1,1x,2,2x,3)"
+#endif
+
+#ifndef BTA_AG_CHLD_VAL
+#define BTA_AG_CHLD_VAL  "(0,1,2,3)"
+#endif
+
+/* Set the CIND to match HFP 1.5 */
+#ifndef BTA_AG_CIND_INFO
+#define BTA_AG_CIND_INFO "(\"call\",(0,1)),(\"callsetup\",(0-3)),(\"service\",(0-1)),(\"signal\",(0-5)),(\"roam\",(0,1)),(\"battchg\",(0-5)),(\"callheld\",(0-2))"
+#endif
+
+
+/******************************************************************************
+**
+** BTE
+**
+******************************************************************************/
+#ifndef BTE_PLATFORM_IDLE
+#define BTE_PLATFORM_IDLE
+#endif
+
+#ifndef BTE_IDLE_TASK_INCLUDED
+#define BTE_IDLE_TASK_INCLUDED FALSE
+#endif
+
+#ifndef BTE_PLATFORM_INITHW
+#define BTE_PLATFORM_INITHW
+#endif
+
+#ifndef BTE_BTA_CODE_INCLUDED
+#define BTE_BTA_CODE_INCLUDED FALSE
+#endif
+
+/******************************************************************************
+**
+** BTTRC
+**
+******************************************************************************/
+/* Whether to parse and display traces-> Platform specific implementation */
+#ifndef BTTRC_DISP
+#define BTTRC_DISP        BTTRC_DispOnInsight
+#endif
+
+/******************************************************************************
+**
+** Tracing:  Include trace header file here.
+**
+******************************************************************************/
+
+#include "bt_trace.h"
+
+#endif /* BT_TARGET_H */
+
diff --git a/include/bt_trace.h b/include/bt_trace.h
new file mode 100644
index 0000000..6c3e7b1
--- /dev/null
+++ b/include/bt_trace.h
@@ -0,0 +1,4778 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains definitions for implementing the
+ *  diagnostic trace message service.
+ *
+ ******************************************************************************/
+
+#ifndef BT_TRACE_H
+#define BT_TRACE_H
+
+#ifndef BTTRC_INCLUDED
+#define BTTRC_INCLUDED  FALSE
+#endif
+#ifndef BTTRC_PARSER_INCLUDED
+#define BTTRC_PARSER_INCLUDED FALSE
+#endif
+#ifndef MAX_TRACE_RAM_SIZE
+#define MAX_TRACE_RAM_SIZE 10000
+#endif
+
+/* BTE tracing IDs for debug purposes */
+/* LayerIDs for stack */
+#define BTTRC_ID_STK_GKI                   1
+#define BTTRC_ID_STK_BTU                   2
+#define BTTRC_ID_STK_HCI                   3
+#define BTTRC_ID_STK_L2CAP                 4
+#define BTTRC_ID_STK_RFCM_MX               5
+#define BTTRC_ID_STK_RFCM_PRT              6
+#define BTTRC_ID_STK_OBEX_C                7
+#define BTTRC_ID_STK_OBEX_S                8
+#define BTTRC_ID_STK_AVCT                  9
+#define BTTRC_ID_STK_AVDT                  10
+#define BTTRC_ID_STK_AVRC                  11
+#define BTTRC_ID_STK_BIC                   12
+#define BTTRC_ID_STK_BIS                   13
+#define BTTRC_ID_STK_BNEP                  14
+#define BTTRC_ID_STK_BPP                   15
+#define BTTRC_ID_STK_BTM_ACL               16
+#define BTTRC_ID_STK_BTM_PM                17
+#define BTTRC_ID_STK_BTM_DEV_CTRL          18
+#define BTTRC_ID_STK_BTM_SVC_DSC           19
+#define BTTRC_ID_STK_BTM_INQ               20
+#define BTTRC_ID_STK_BTM_SCO               21
+#define BTTRC_ID_STK_BTM_SEC               22
+#define BTTRC_ID_STK_DUN                   23
+#define BTTRC_ID_STK_HID                   24
+#define BTTRC_ID_STK_HSP2                  25
+#define BTTRC_ID_STK_CTP                   26
+#define BTTRC_ID_STK_FTC                   27
+#define BTTRC_ID_STK_FTS                   28
+#define BTTRC_ID_STK_GAP                   29
+#define BTTRC_ID_STK_GOEP                  30
+#define BTTRC_ID_STK_HCRP                  31
+#define BTTRC_ID_STK_ICP                   32
+#define BTTRC_ID_STK_OPC                   33
+#define BTTRC_ID_STK_OPS                   34
+#define BTTRC_ID_STK_PAN                   35
+#define BTTRC_ID_STK_SAP                   36
+#define BTTRC_ID_STK_SDP                   37
+#define BTTRC_ID_STK_SLIP                  38
+#define BTTRC_ID_STK_SPP                   39
+#define BTTRC_ID_STK_TCS                   40
+#define BTTRC_ID_STK_VDP                   41
+#define BTTRC_ID_STK_MCAP                  42
+#define BTTRC_ID_STK_GATT                  43
+#define BTTRC_ID_STK_SMP                   44
+#define BTTRC_ID_STK_NFC                   45
+#define BTTRC_ID_STK_NCI                   46
+#define BTTRC_ID_STK_IDEP                  47
+#define BTTRC_ID_STK_NDEP                  48
+#define BTTRC_ID_STK_LLCP                  49
+#define BTTRC_ID_STK_RW                    50
+#define BTTRC_ID_STK_CE                    51
+#define BTTRC_ID_STK_SNEP                  52
+#define BTTRC_ID_STK_NDEF                  53
+
+
+/* LayerIDs for BTA */
+#define BTTRC_ID_BTA_ACC                   55         /* Advanced Camera Client */
+#define BTTRC_ID_BTA_AG                    56         /* audio gateway */
+#define BTTRC_ID_BTA_AV                    57         /* Advanced audio */
+#define BTTRC_ID_BTA_BIC                   58         /* Basic Imaging Client */
+#define BTTRC_ID_BTA_BIS                   59         /* Basic Imaging Server */
+#define BTTRC_ID_BTA_BP                    60         /* Basic Printing Client */
+#define BTTRC_ID_BTA_CG                    61
+#define BTTRC_ID_BTA_CT                    62         /* cordless telephony terminal */
+#define BTTRC_ID_BTA_DG                    63         /* data gateway */
+#define BTTRC_ID_BTA_DM                    64         /* device manager */
+#define BTTRC_ID_BTA_DM_SRCH               65         /* device manager search */
+#define BTTRC_ID_BTA_DM_SEC                66         /* device manager security */
+#define BTTRC_ID_BTA_FM                    67
+#define BTTRC_ID_BTA_FTC                   68         /* file transfer client */
+#define BTTRC_ID_BTA_FTS                   69         /* file transfer server */
+#define BTTRC_ID_BTA_HIDH                  70
+#define BTTRC_ID_BTA_HIDD                  71
+#define BTTRC_ID_BTA_JV                    72
+#define BTTRC_ID_BTA_OPC                   73         /* object push client */
+#define BTTRC_ID_BTA_OPS                   74         /* object push server */
+#define BTTRC_ID_BTA_PAN                   75         /* Personal Area Networking */
+#define BTTRC_ID_BTA_PR                    76         /* Printer client */
+#define BTTRC_ID_BTA_SC                    77         /* SIM Card Access server */
+#define BTTRC_ID_BTA_SS                    78         /* synchronization server */
+#define BTTRC_ID_BTA_SYS                   79         /* system manager */
+#define BTTRC_ID_AVDT_SCB                  80         /* avdt scb */
+#define BTTRC_ID_AVDT_CCB                  81         /* avdt ccb */
+
+// btla-specific ++
+/* LayerIDs added for BTL-A. Probably should modify bte_logmsg.c in future. */
+#define BTTRC_ID_STK_RFCOMM                82
+#define BTTRC_ID_STK_RFCOMM_DATA           83
+#define BTTRC_ID_STK_OBEX                  84
+#define BTTRC_ID_STK_A2D                   85
+#define BTTRC_ID_STK_BIP                   86
+
+/* LayerIDs for BT APP */
+#define BTTRC_ID_BTAPP                     87
+#define BTTRC_ID_BT_PROTOCOL               88         /* this is a temporary solution to allow dynamic
+                                                         enable/disable of BT_PROTOCOL_TRACE */
+#define BTTRC_ID_MAX_ID                    BTTRC_ID_BT_PROTOCOL
+// btla-specific --
+#define BTTRC_ID_ALL_LAYERS                0xFF       /* all trace layers */
+typedef UINT8 tBTTRC_LAYER_ID;
+
+/* Trace type definitions. Note that these are mutually exclusive in a trace. This
+means that any trace can be either error,warning,api,event or dbg */
+#define BTTRC_TYPE_ERROR                   0x01       /* Traces for error situation */
+#define BTTRC_TYPE_WARNING	               0x02       /* Traces for warning situation */
+#define BTTRC_TYPE_API                     0x04       /* Traces for API */
+#define BTTRC_TYPE_EVENT                   0x08       /* Traces for EVENT */
+#define BTTRC_TYPE_ACTION                  0x10       /* Traces for Action functions */
+#define BTTRC_TYPE_DBG                     0x20       /* Traces for debugging purpose */
+typedef UINT8 tBTTRC_TYPE;
+
+/* Masks to identify the stack that originated the trace */
+#define BTTRC_TRACE_LITE                   0x80       /* MM Lite stack */
+#define BTTRC_TRACE_EMBD                   0x40       /* Embedded host stack */
+
+/* Parameter datatypes used in Trace APIs */
+#define BTTRC_PARAM_UINT8                  1
+#define BTTRC_PARAM_UINT16                 2
+#define BTTRC_PARAM_UINT32                 3
+typedef UINT8 tBTTRC_PARAM_TYPE;
+
+/* Special token definitions */
+#define BTTRC_TOKEN_SM_STATE               0xFFFF     /* Token indicating the State of a State m/c */
+
+// btla-specific ++
+typedef struct {
+    tBTTRC_LAYER_ID layer_id;
+    tBTTRC_TYPE     type;      /* TODO: use tBTTRC_TYPE instead of "classical level 0-5" */
+} tBTTRC_LEVEL;
+
+typedef UINT8 (tBTTRC_SET_TRACE_LEVEL)( UINT8 );
+
+typedef struct {
+    const tBTTRC_LAYER_ID         layer_id_start;
+    const tBTTRC_LAYER_ID         layer_id_end;
+    tBTTRC_SET_TRACE_LEVEL        *p_f;
+    const char                    *trc_name;
+    UINT8                         trace_level;
+} tBTTRC_FUNC_MAP;
+
+extern tBTTRC_FUNC_MAP bttrc_set_level_map[];
+extern const UINT16 bttrc_map_size;
+extern BT_API tBTTRC_LEVEL * BTA_SysSetTraceLevel( tBTTRC_LEVEL * p_levels );
+// btla-specific --
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* External declaration for appl_trace_level here to avoid to add the declaration in all the files using APPL_TRACExxx macros */
+extern UINT8 appl_trace_level ;
+
+// btla-specific ++
+EXPORT_API extern void BTE_InitTraceLevels( void );
+// btla-specific --
+
+/* Prototype for message logging function. */
+EXPORT_API extern void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...);
+extern void LogMsg_0 (UINT32 trace_set_mask, const char *p_str);
+extern void LogMsg_1 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1);
+extern void LogMsg_2 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2);
+extern void LogMsg_3 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+                      UINT32 p3);
+extern void LogMsg_4 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+                      UINT32 p3, UINT32 p4);
+extern void LogMsg_5 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+                      UINT32 p3, UINT32 p4, UINT32 p5);
+extern void LogMsg_6 (UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+                      UINT32 p3, UINT32 p4, UINT32 p5, UINT32 p6);
+
+/* Prototype for stack tracing function. */
+EXPORT_API extern void BTTRC_StackTrace0(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token);
+EXPORT_API extern void BTTRC_StackTrace1(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val);
+EXPORT_API extern void BTTRC_StackTrace2(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val,
+                                   tBTTRC_PARAM_TYPE p2_type, UINT32 p2_val);
+EXPORT_API extern void BTTRC_StackTrace3(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val,
+                                   tBTTRC_PARAM_TYPE p2_type, UINT32 p2_val,
+                                   tBTTRC_PARAM_TYPE p3_type, UINT32 p3_val);
+EXPORT_API extern void BTTRC_StackTrace4(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val,
+                                   tBTTRC_PARAM_TYPE p2_type, UINT32 p2_val,
+                                   tBTTRC_PARAM_TYPE p3_type, UINT32 p3_val,
+                                   tBTTRC_PARAM_TYPE p4_type, UINT32 p4_val);
+EXPORT_API extern void BTTRC_StackTrace5(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val,
+                                   tBTTRC_PARAM_TYPE p2_type, UINT32 p2_val,
+                                   tBTTRC_PARAM_TYPE p3_type, UINT32 p3_val,
+                                   tBTTRC_PARAM_TYPE p4_type, UINT32 p4_val,
+                                   tBTTRC_PARAM_TYPE p5_type, UINT32 p5_val);
+EXPORT_API extern void BTTRC_StackTrace6(tBTTRC_LAYER_ID layer_id,
+                                   tBTTRC_TYPE type,
+                                   UINT16 token,
+                                   tBTTRC_PARAM_TYPE p1_type, UINT32 p1_val,
+                                   tBTTRC_PARAM_TYPE p2_type, UINT32 p2_val,
+                                   tBTTRC_PARAM_TYPE p3_type, UINT32 p3_val,
+                                   tBTTRC_PARAM_TYPE p4_type, UINT32 p4_val,
+                                   tBTTRC_PARAM_TYPE p5_type, UINT32 p5_val,
+                                   tBTTRC_PARAM_TYPE p6_type, UINT32 p6_val);
+
+// btla-specific ++
+/* p_levels must be a 0 terminated list ! */
+//EXPORT_API extern tBTTRC_LEVEL * BTA_SysSetTraceLevel( tBTTRC_LEVEL * p_levels );
+// btla-specific --
+
+#ifdef __cplusplus
+}
+#endif
+
+/******************************************************************************
+**
+** Trace configurable parameters
+**
+******************************************************************************/
+
+/* Enables or disables verbose trace information. */
+#ifndef BT_TRACE_VERBOSE
+#define BT_TRACE_VERBOSE    FALSE
+#endif
+
+/* Enables or disables all trace messages. */
+#ifndef BT_USE_TRACES
+#define BT_USE_TRACES       TRUE
+#endif
+
+
+/******************************************************************************
+**
+** Trace Levels
+**
+** The following values may be used for different levels:
+**      BT_TRACE_LEVEL_NONE    0        * No trace messages to be generated
+**      BT_TRACE_LEVEL_ERROR   1        * Error condition trace messages
+**      BT_TRACE_LEVEL_WARNING 2        * Warning condition trace messages
+**      BT_TRACE_LEVEL_API     3        * API traces
+**      BT_TRACE_LEVEL_EVENT   4        * Debug messages for events
+**      BT_TRACE_LEVEL_DEBUG   5        * Debug messages (general)
+******************************************************************************/
+
+// btla-specific ++
+/* Core Stack default trace levels */
+#ifndef HCI_INITIAL_TRACE_LEVEL
+#define HCI_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BTM_INITIAL_TRACE_LEVEL
+#define BTM_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef L2CAP_INITIAL_TRACE_LEVEL
+#define L2CAP_INITIAL_TRACE_LEVEL           BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef LLCP_INITIAL_TRACE_LEVEL
+#define LLCP_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef AMP_INITIAL_TRACE_LEVEL
+#define AMP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef RFCOMM_INITIAL_TRACE_LEVEL
+#define RFCOMM_INITIAL_TRACE_LEVEL          BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef OBX_INITIAL_TRACE_LEVEL
+#define OBX_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef SDP_INITIAL_TRACE_LEVEL
+#define SDP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef TCS_INITIAL_TRACE_LEVEL
+#define TCS_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+/* Profile default trace levels */
+#ifndef DUN_INITIAL_TRACE_LEVEL
+#define DUN_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef GAP_INITIAL_TRACE_LEVEL
+#define GAP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef GOEP_INITIAL_TRACE_LEVEL
+#define GOEP_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef HSP2_INITIAL_TRACE_LEVEL
+#define HSP2_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef SPP_INITIAL_TRACE_LEVEL
+#define SPP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef ICP_INITIAL_TRACE_LEVEL
+#define ICP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef CTP_INITIAL_TRACE_LEVEL
+#define CTP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef HCRP_INITIAL_TRACE_LEVEL
+#define HCRP_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef HCRPM_INITIAL_TRACE_LEVEL
+#define HCRPM_INITIAL_TRACE_LEVEL           BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BPP_INITIAL_TRACE_LEVEL
+#define BPP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BIP_INITIAL_TRACE_LEVEL
+#define BIP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BNEP_INITIAL_TRACE_LEVEL
+#define BNEP_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef PAN_INITIAL_TRACE_LEVEL
+#define PAN_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef SAP_INITIAL_TRACE_LEVEL
+#define SAP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef FTP_INITIAL_TRACE_LEVEL
+#define FTP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef OPP_INITIAL_TRACE_LEVEL
+#define OPP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef HFP_INITIAL_TRACE_LEVEL
+#define HFP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef PAP_INITIAL_TRACE_LEVEL
+#define PAP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef A2D_INITIAL_TRACE_LEVEL
+#define A2D_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef VDP_INITIAL_TRACE_LEVEL
+#define VDP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef AVDT_INITIAL_TRACE_LEVEL
+#define AVDT_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef AVCT_INITIAL_TRACE_LEVEL
+#define AVCT_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef AVRC_INITIAL_TRACE_LEVEL
+#define AVRC_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef MCA_INITIAL_TRACE_LEVEL
+#define MCA_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef HID_INITIAL_TRACE_LEVEL
+#define HID_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+/* Application and other default trace levels */
+#ifndef RPC_INITIAL_TRACE_LEVEL
+#define RPC_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef APPL_INITIAL_TRACE_LEVEL
+#define APPL_INITIAL_TRACE_LEVEL            BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BT_TRACE_APPL
+#define BT_TRACE_APPL   BT_USE_TRACES
+#endif
+
+#ifndef NFC_INITIAL_TRACE_LEVEL
+#define NFC_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef GATT_INITIAL_TRACE_LEVEL
+#define GATT_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef SMP_INITIAL_TRACE_LEVEL
+#define SMP_INITIAL_TRACE_LEVEL             BT_TRACE_LEVEL_WARNING
+#endif
+// btla-specific --
+
+
+#if (BTTRC_INCLUDED == TRUE)
+/***************************************************************************************/
+/* BTTRC MACROS */
+
+#define BTTRC_EVENT(lid, event, state)   \
+            {BTTRC_StackTrace1(lid, BTTRC_TYPE_EVENT, event, BTTRC_PARAM_UINT8, state);}
+#define BTTRC_ACTION(lid, action)  \
+            {BTTRC_StackTrace0(lid, BTTRC_TYPE_ACTION, action);}
+#define BTTRC_STATE(lid, state)   \
+            {BTTRC_StackTrace1(lid, BTTRC_TYPE_EVENT, BTTRC_TOKEN_SM_STATE, BTTRC_PARAM_UINT8, state);}
+
+#define BTTRC_API0(lid, api)  \
+            {BTTRC_StackTrace0(lid, BTTRC_TYPE_API, api);}
+#define BTTRC_API1(lid, api, p1_t,p1_v)  \
+            {BTTRC_StackTrace1(lid, BTTRC_TYPE_API, api, p1_t,p1_v);}
+#define BTTRC_API2(lid, api, p1_t,p1_v,p2_t,p2_v)  \
+            {BTTRC_StackTrace2(lid, BTTRC_TYPE_API, api, p1_t,p1_v,p2_t,p2_v);}
+#define BTTRC_API3(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)  \
+            {BTTRC_StackTrace3(lid, BTTRC_TYPE_API, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v);}
+#define BTTRC_API4(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)  \
+            {BTTRC_StackTrace4(lid, BTTRC_TYPE_API, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v);}
+#define BTTRC_API5(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)  \
+            {BTTRC_StackTrace5(lid, BTTRC_TYPE_API, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v);}
+#define BTTRC_API6(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)  \
+            {BTTRC_StackTrace6(lid, BTTRC_TYPE_API, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v);}
+
+
+#define BTTRC_DBG0(lid, dbg)  \
+            {BTTRC_StackTrace0(lid, BTTRC_TYPE_DBG, dbg);}
+#define BTTRC_DBG1(lid, dbg, p1_t,p1_v)  \
+            {BTTRC_StackTrace1(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v);}
+#define BTTRC_DBG2(lid, dbg, p1_t,p1_v,p2_t,p2_v)  \
+            {BTTRC_StackTrace2(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v,p2_t,p2_v);}
+#define BTTRC_DBG3(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)  \
+            {BTTRC_StackTrace3(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v);}
+#define BTTRC_DBG4(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)  \
+            {BTTRC_StackTrace4(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v);}
+#define BTTRC_DBG5(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)  \
+            {BTTRC_StackTrace5(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v);}
+#define BTTRC_DBG6(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)  \
+            {BTTRC_StackTrace6(lid, BTTRC_TYPE_DBG, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v);}
+
+/***************************************************************************************/
+/*AVDT MACROS */
+
+#define BTTRC_AVDT_API0(api)   \
+        BTTRC_API0(BTTRC_ID_STK_AVDT, api)
+#define BTTRC_AVDT_API1(api, p1_t, p1_v) \
+        BTTRC_API1(BTTRC_ID_STK_AVDT, api, p1_t, p1_v)
+#define BTTRC_AVDT_API2(api, p1_t, p1_v, p2_t, p2_v) \
+        BTTRC_API2(BTTRC_ID_STK_AVDT, api, p1_t, p1_v, p2_t, p2_v)
+/***************************************************************************************/
+/*AVDT_SCB MACROS */
+
+#define BTTRC_AVDT_SCB_EVENT(event, state)   \
+            BTTRC_EVENT(BTTRC_ID_AVDT_SCB, event, state)
+#define BTTRC_AVDT_SCB_ACTION(action)  \
+            BTTRC_ACTION(BTTRC_ID_AVDT_SCB, action)
+#define BTTRC_AVDT_SCB_STATE(next_state)   \
+            BTTRC_STATE(BTTRC_ID_AVDT_SCB, next_state)
+
+#define BTTRC_AVDT_SCB_DBG0(dbg)  \
+            BTTRC_DBG0(BTTRC_ID_AVDT_SCB, dbg)
+#define BTTRC_AVDT_SCB_DBG1(dbg, p1_t,p1_v)  \
+            BTTRC_DBG1(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v)
+#define BTTRC_AVDT_SCB_DBG2(dbg, p1_t,p1_v,p2_t,p2_v)  \
+            BTTRC_DBG2(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v,p2_t,p2_v)
+#define BTTRC_AVDT_SCB_DBG3(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)  \
+            BTTRC_DBG3(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_AVDT_SCB_DBG4(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)  \
+            BTTRC_DBG4(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_AVDT_SCB_DBG5(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)  \
+            BTTRC_DBG5(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_AVDT_SCB_DBG6(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)  \
+            BTTRC_DBG6(BTTRC_ID_AVDT_SCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+/***************************************************************************************/
+/*AVDT_CCB MACROS */
+
+#define BTTRC_AVDT_CCB_EVENT(event, state)   \
+            BTTRC_EVENT(BTTRC_ID_AVDT_CCB, event, state)
+#define BTTRC_AVDT_CCB_ACTION(action)  \
+            BTTRC_ACTION(BTTRC_ID_AVDT_CCB, action)
+#define BTTRC_AVDT_CCB_STATE(next_state)   \
+            BTTRC_STATE(BTTRC_ID_AVDT_CCB, next_state)
+
+#define BTTRC_AVDT_CCB_DBG0(dbg)  \
+            BTTRC_DBG0(BTTRC_ID_AVDT_CCB, dbg)
+#define BTTRC_AVDT_CCB_DBG1(dbg, p1_t,p1_v)  \
+            BTTRC_DBG1(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v)
+#define BTTRC_AVDT_CCB_DBG2(dbg, p1_t,p1_v,p2_t,p2_v)  \
+            BTTRC_DBG2(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v,p2_t,p2_v)
+#define BTTRC_AVDT_CCB_DBG3(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)  \
+            BTTRC_DBG3(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_AVDT_CCB_DBG4(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)  \
+            BTTRC_DBG4(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_AVDT_CCB_DBG5(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)  \
+            BTTRC_DBG5(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_AVDT_CCB_DBG6(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)  \
+            BTTRC_DBG6(BTTRC_ID_AVDT_CCB, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+/***************************************************************************************/
+
+#else /*BTTRC_INCLUDED*/
+
+/***************************************************************************************/
+/* BTTRC MACROS */
+
+#define BTTRC_EVENT(lid, event, state)
+#define BTTRC_ACTION(lid, action)
+#define BTTRC_STATE(lid, state)
+
+#define BTTRC_API0(lid, api)
+#define BTTRC_API1(lid, api, p1_t, p1_v)
+#define BTTRC_API2(lid, api, p1_t, p1_v, p2_t, p2_v)
+#define BTTRC_API3(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_API4(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_API5(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_API6(lid, api, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+
+
+#define BTTRC_DBG0(lid, dbg)
+#define BTTRC_DBG1(lid, dbg, p1_t,p1_v)
+#define BTTRC_DBG2(lid, dbg, p1_t,p1_v,p2_t,p2_v)
+#define BTTRC_DBG3(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_DBG4(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_DBG5(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_DBG6(lid, dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+
+/***************************************************************************************/
+/*AVDT MACROS */
+#define BTTRC_AVDT_API0(api)
+#define BTTRC_AVDT_API1(api, p1_t,p1_v)
+#define BTTRC_AVDT_API2(api, p1_t,p1_v,p2_t,p2_v)
+/***************************************************************************************/
+/*AVDT_SCB MACROS */
+
+#define BTTRC_AVDT_SCB_EVENT(event, state)
+#define BTTRC_AVDT_SCB_ACTION(action)
+#define BTTRC_AVDT_SCB_STATE(next_state)
+
+#define BTTRC_AVDT_SCB_DBG0(dbg)
+#define BTTRC_AVDT_SCB_DBG1(dbg, p1_t,p1_v)
+#define BTTRC_AVDT_SCB_DBG2(dbg, p1_t,p1_v,p2_t,p2_v)
+#define BTTRC_AVDT_SCB_DBG3(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_AVDT_SCB_DBG4(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_AVDT_SCB_DBG5(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_AVDT_SCB_DBG6(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+
+/***************************************************************************************/
+/*AVDT_CCB MACROS */
+
+#define BTTRC_AVDT_CCB_EVENT(event, state)
+#define BTTRC_AVDT_CCB_ACTION(action)
+#define BTTRC_AVDT_CCB_STATE(next_state)
+
+#define BTTRC_AVDT_CCB_DBG0(dbg)
+#define BTTRC_AVDT_CCB_DBG1(dbg, p1_t,p1_v)
+#define BTTRC_AVDT_CCB_DBG2(dbg, p1_t,p1_v,p2_t,p2_v)
+#define BTTRC_AVDT_CCB_DBG3(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v)
+#define BTTRC_AVDT_CCB_DBG4(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v)
+#define BTTRC_AVDT_CCB_DBG5(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v)
+#define BTTRC_AVDT_CCB_DBG6(dbg, p1_t,p1_v,p2_t,p2_v,p3_t,p3_v,p4_t,p4_v,p5_t,p5_v,p6_t,p6_v)
+
+/***************************************************************************************/
+
+#endif /*BTTRC_INCLUDED*/
+
+
+#if (BT_USE_TRACES == TRUE)
+
+#define BT_TRACE_0(l,t,m)                           LogMsg_0((TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t)),(m))
+#define BT_TRACE_1(l,t,m,p1)                        LogMsg_1(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1))
+#define BT_TRACE_2(l,t,m,p1,p2)                     LogMsg_2(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1),   \
+                                                        (UINT32)(p2))
+#define BT_TRACE_3(l,t,m,p1,p2,p3)                  LogMsg_3(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1),   \
+                                                        (UINT32)(p2),(UINT32)(p3))
+#define BT_TRACE_4(l,t,m,p1,p2,p3,p4)               LogMsg_4(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1),   \
+                                                        (UINT32)(p2),(UINT32)(p3),(UINT32)(p4))
+#define BT_TRACE_5(l,t,m,p1,p2,p3,p4,p5)            LogMsg_5(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1),   \
+                                                        (UINT32)(p2),(UINT32)(p3),(UINT32)(p4), \
+                                                        (UINT32)(p5))
+#define BT_TRACE_6(l,t,m,p1,p2,p3,p4,p5,p6)         LogMsg_6(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | (t),(m),(UINT32)(p1),   \
+                                                        (UINT32)(p2),(UINT32)(p3),(UINT32)(p4), \
+                                                        (UINT32)(p5),(UINT32)(p6))
+
+#define BT_ERROR_TRACE_0(l,m)                     LogMsg_0(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | TRACE_TYPE_ERROR,(m))
+#define BT_ERROR_TRACE_1(l,m,p1)                  LogMsg_1(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | TRACE_TYPE_ERROR,(m),(UINT32)(p1))
+#define BT_ERROR_TRACE_2(l,m,p1,p2)               LogMsg_2(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | TRACE_TYPE_ERROR,(m),(UINT32)(p1),(UINT32)(p2))
+#define BT_ERROR_TRACE_3(l,m,p1,p2,p3)            LogMsg_3(TRACE_CTRL_GENERAL | (l) | TRACE_ORG_STACK | TRACE_TYPE_ERROR,(m),(UINT32)(p1),(UINT32)(p2),(UINT32)(p3))
+
+/* Define tracing for the HCI unit
+*/
+#define HCI_TRACE_ERROR0(m)                     {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m);}
+#define HCI_TRACE_ERROR1(m,p1)                  {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1);}
+#define HCI_TRACE_ERROR2(m,p1,p2)               {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HCI_TRACE_ERROR3(m,p1,p2,p3)            {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HCI_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HCI_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HCI_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (btu_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCI_TRACE_WARNING0(m)                   {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m);}
+#define HCI_TRACE_WARNING1(m,p1)                {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1);}
+#define HCI_TRACE_WARNING2(m,p1,p2)             {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HCI_TRACE_WARNING3(m,p1,p2,p3)          {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HCI_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HCI_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HCI_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (btu_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCI_TRACE_EVENT0(m)                     {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m);}
+#define HCI_TRACE_EVENT1(m,p1)                  {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m, p1);}
+#define HCI_TRACE_EVENT2(m,p1,p2)               {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HCI_TRACE_EVENT3(m,p1,p2,p3)            {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HCI_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HCI_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HCI_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (btu_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCI_TRACE_DEBUG0(m)                     {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m);}
+#define HCI_TRACE_DEBUG1(m,p1)                  {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1);}
+#define HCI_TRACE_DEBUG2(m,p1,p2)               {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HCI_TRACE_DEBUG3(m,p1,p2,p3)            {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HCI_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HCI_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HCI_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (btu_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+
+/* Define tracing for BTM
+*/
+#define BTM_TRACE_ERROR0(m)                     {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m);}
+#define BTM_TRACE_ERROR1(m,p1)                  {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1);}
+#define BTM_TRACE_ERROR2(m,p1,p2)               {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1,p2);}
+#define BTM_TRACE_ERROR3(m,p1,p2,p3)            {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define BTM_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define BTM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define BTM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (btm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_BTM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define BTM_TRACE_WARNING0(m)                   {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m);}
+#define BTM_TRACE_WARNING1(m,p1)                {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1);}
+#define BTM_TRACE_WARNING2(m,p1,p2)             {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1,p2);}
+#define BTM_TRACE_WARNING3(m,p1,p2,p3)          {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define BTM_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define BTM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define BTM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (btm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_BTM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define BTM_TRACE_API0(m)                       {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_BTM, TRACE_TYPE_API, m);}
+#define BTM_TRACE_API1(m,p1)                    {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_BTM, TRACE_TYPE_API, m, p1);}
+#define BTM_TRACE_API2(m,p1,p2)                 {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_BTM, TRACE_TYPE_API, m,p1,p2);}
+#define BTM_TRACE_API3(m,p1,p2,p3)              {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_BTM, TRACE_TYPE_API, m,p1,p2,p3);}
+#define BTM_TRACE_API4(m,p1,p2,p3,p4)           {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_BTM, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define BTM_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_BTM, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define BTM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (btm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_BTM, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define BTM_TRACE_EVENT0(m)                     {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m);}
+#define BTM_TRACE_EVENT1(m,p1)                  {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m, p1);}
+#define BTM_TRACE_EVENT2(m,p1,p2)               {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m,p1,p2);}
+#define BTM_TRACE_EVENT3(m,p1,p2,p3)            {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define BTM_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define BTM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define BTM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (btm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_BTM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define BTM_TRACE_DEBUG0(m)                     {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m);}
+#define BTM_TRACE_DEBUG1(m,p1)                  {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1);}
+#define BTM_TRACE_DEBUG2(m,p1,p2)               {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define BTM_TRACE_DEBUG3(m,p1,p2,p3)            {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define BTM_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define BTM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define BTM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (btm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+
+/* Define tracing for the L2CAP unit
+*/
+#define L2CAP_TRACE_ERROR0(m)                     {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m);}
+#define L2CAP_TRACE_ERROR1(m,p1)                  {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1);}
+#define L2CAP_TRACE_ERROR2(m,p1,p2)               {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define L2CAP_TRACE_ERROR3(m,p1,p2,p3)            {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define L2CAP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define L2CAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define L2CAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_L2CAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define L2CAP_TRACE_WARNING0(m)                   {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m);}
+#define L2CAP_TRACE_WARNING1(m,p1)                {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1);}
+#define L2CAP_TRACE_WARNING2(m,p1,p2)             {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define L2CAP_TRACE_WARNING3(m,p1,p2,p3)          {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define L2CAP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define L2CAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define L2CAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_L2CAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define L2CAP_TRACE_API0(m)                       {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m);}
+#define L2CAP_TRACE_API1(m,p1)                    {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1);}
+#define L2CAP_TRACE_API2(m,p1,p2)                 {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1,p2);}
+#define L2CAP_TRACE_API3(m,p1,p2,p3)              {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define L2CAP_TRACE_API4(m,p1,p2,p3,p4)           {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define L2CAP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define L2CAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_L2CAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define L2CAP_TRACE_EVENT0(m)                     {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m);}
+#define L2CAP_TRACE_EVENT1(m,p1)                  {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m, p1);}
+#define L2CAP_TRACE_EVENT2(m,p1,p2)               {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define L2CAP_TRACE_EVENT3(m,p1,p2,p3)            {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define L2CAP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define L2CAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define L2CAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_L2CAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define L2CAP_TRACE_DEBUG0(m)                     {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m);}
+#define L2CAP_TRACE_DEBUG1(m,p1)                  {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1);}
+#define L2CAP_TRACE_DEBUG2(m,p1,p2)               {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define L2CAP_TRACE_DEBUG3(m,p1,p2,p3)            {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define L2CAP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define L2CAP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define L2CAP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (l2cb.l2cap_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_L2CAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the LLCP unit
+*/
+#define LLCP_TRACE_ERROR0(m)                     {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m);}
+#define LLCP_TRACE_ERROR1(m,p1)                  {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1);}
+#define LLCP_TRACE_ERROR2(m,p1,p2)               {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define LLCP_TRACE_ERROR3(m,p1,p2,p3)            {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define LLCP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define LLCP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define LLCP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_LLCP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define LLCP_TRACE_WARNING0(m)                   {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m);}
+#define LLCP_TRACE_WARNING1(m,p1)                {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1);}
+#define LLCP_TRACE_WARNING2(m,p1,p2)             {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define LLCP_TRACE_WARNING3(m,p1,p2,p3)          {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define LLCP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define LLCP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define LLCP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_LLCP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define LLCP_TRACE_API0(m)                       {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_LLCP, TRACE_TYPE_API, m);}
+#define LLCP_TRACE_API1(m,p1)                    {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1);}
+#define LLCP_TRACE_API2(m,p1,p2)                 {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1,p2);}
+#define LLCP_TRACE_API3(m,p1,p2,p3)              {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define LLCP_TRACE_API4(m,p1,p2,p3,p4)           {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define LLCP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define LLCP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_LLCP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define LLCP_TRACE_EVENT0(m)                     {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m);}
+#define LLCP_TRACE_EVENT1(m,p1)                  {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m, p1);}
+#define LLCP_TRACE_EVENT2(m,p1,p2)               {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define LLCP_TRACE_EVENT3(m,p1,p2,p3)            {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define LLCP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define LLCP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define LLCP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_LLCP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define LLCP_TRACE_DEBUG0(m)                     {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m);}
+#define LLCP_TRACE_DEBUG1(m,p1)                  {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1);}
+#define LLCP_TRACE_DEBUG2(m,p1,p2)               {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define LLCP_TRACE_DEBUG3(m,p1,p2,p3)            {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define LLCP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define LLCP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define LLCP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (llcp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_LLCP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the SDP unit
+*/
+#define SDP_TRACE_ERROR0(m)                     {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m);}
+#define SDP_TRACE_ERROR1(m,p1)                  {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1);}
+#define SDP_TRACE_ERROR2(m,p1,p2)               {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define SDP_TRACE_ERROR3(m,p1,p2,p3)            {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define SDP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define SDP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define SDP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_SDP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define SDP_TRACE_WARNING0(m)                   {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m);}
+#define SDP_TRACE_WARNING1(m,p1)                {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1);}
+#define SDP_TRACE_WARNING2(m,p1,p2)             {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define SDP_TRACE_WARNING3(m,p1,p2,p3)          {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define SDP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define SDP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define SDP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_SDP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define SDP_TRACE_API0(m)                       {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_SDP, TRACE_TYPE_API, m);}
+#define SDP_TRACE_API1(m,p1)                    {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1);}
+#define SDP_TRACE_API2(m,p1,p2)                 {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1,p2);}
+#define SDP_TRACE_API3(m,p1,p2,p3)              {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define SDP_TRACE_API4(m,p1,p2,p3,p4)           {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define SDP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define SDP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_SDP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define SDP_TRACE_EVENT0(m)                     {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m);}
+#define SDP_TRACE_EVENT1(m,p1)                  {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m, p1);}
+#define SDP_TRACE_EVENT2(m,p1,p2)               {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define SDP_TRACE_EVENT3(m,p1,p2,p3)            {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define SDP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define SDP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define SDP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_SDP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define SDP_TRACE_DEBUG0(m)                     {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m);}
+#define SDP_TRACE_DEBUG1(m,p1)                  {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1);}
+#define SDP_TRACE_DEBUG2(m,p1,p2)               {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define SDP_TRACE_DEBUG3(m,p1,p2,p3)            {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define SDP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define SDP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define SDP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_SDP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the RFCOMM unit
+*/
+#define RFCOMM_TRACE_ERROR0(m)                     {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m);}
+#define RFCOMM_TRACE_ERROR1(m,p1)                  {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1);}
+#define RFCOMM_TRACE_ERROR2(m,p1,p2)               {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1,p2);}
+#define RFCOMM_TRACE_ERROR3(m,p1,p2,p3)            {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define RFCOMM_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define RFCOMM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define RFCOMM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_RFCOMM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define RFCOMM_TRACE_WARNING0(m)                   {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m);}
+#define RFCOMM_TRACE_WARNING1(m,p1)                {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1);}
+#define RFCOMM_TRACE_WARNING2(m,p1,p2)             {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1,p2);}
+#define RFCOMM_TRACE_WARNING3(m,p1,p2,p3)          {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define RFCOMM_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define RFCOMM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define RFCOMM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_RFCOMM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define RFCOMM_TRACE_API0(m)                       {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m);}
+#define RFCOMM_TRACE_API1(m,p1)                    {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1);}
+#define RFCOMM_TRACE_API2(m,p1,p2)                 {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1,p2);}
+#define RFCOMM_TRACE_API3(m,p1,p2,p3)              {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1,p2,p3);}
+#define RFCOMM_TRACE_API4(m,p1,p2,p3,p4)           {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define RFCOMM_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define RFCOMM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_RFCOMM, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define RFCOMM_TRACE_EVENT0(m)                     {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m);}
+#define RFCOMM_TRACE_EVENT1(m,p1)                  {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m, p1);}
+#define RFCOMM_TRACE_EVENT2(m,p1,p2)               {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m,p1,p2);}
+#define RFCOMM_TRACE_EVENT3(m,p1,p2,p3)            {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define RFCOMM_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define RFCOMM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define RFCOMM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_RFCOMM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define RFCOMM_TRACE_DEBUG0(m)                     {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m);}
+#define RFCOMM_TRACE_DEBUG1(m,p1)                  {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1);}
+#define RFCOMM_TRACE_DEBUG2(m,p1,p2)               {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define RFCOMM_TRACE_DEBUG3(m,p1,p2,p3)            {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define RFCOMM_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define RFCOMM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define RFCOMM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (rfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_RFCOMM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for Serial Port Profile
+*/
+#define SPP_TRACE_ERROR0(m)                     {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m);}
+#define SPP_TRACE_ERROR1(m,p1)                  {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1);}
+#define SPP_TRACE_ERROR2(m,p1,p2)               {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define SPP_TRACE_ERROR3(m,p1,p2,p3)            {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define SPP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define SPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define SPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (spp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_SPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define SPP_TRACE_WARNING0(m)                   {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m);}
+#define SPP_TRACE_WARNING1(m,p1)                {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1);}
+#define SPP_TRACE_WARNING2(m,p1,p2)             {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define SPP_TRACE_WARNING3(m,p1,p2,p3)          {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define SPP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define SPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define SPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (spp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_SPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define SPP_TRACE_EVENT0(m)                     {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m);}
+#define SPP_TRACE_EVENT1(m,p1)                  {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m, p1);}
+#define SPP_TRACE_EVENT2(m,p1,p2)               {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define SPP_TRACE_EVENT3(m,p1,p2,p3)            {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define SPP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define SPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define SPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (spp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_SPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define SPP_TRACE_API0(m)                       {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_SPP, TRACE_TYPE_API, m);}
+#define SPP_TRACE_API1(m,p1)                    {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_SPP, TRACE_TYPE_API, m, p1);}
+#define SPP_TRACE_API2(m,p1,p2)                 {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_SPP, TRACE_TYPE_API, m,p1,p2);}
+#define SPP_TRACE_API3(m,p1,p2,p3)              {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_SPP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define SPP_TRACE_API4(m,p1,p2,p3,p4)           {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_SPP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define SPP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_SPP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define SPP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (spp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_SPP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define SPP_TRACE_DEBUG0(m)                     {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m);}
+#define SPP_TRACE_DEBUG1(m,p1)                  {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1);}
+#define SPP_TRACE_DEBUG2(m,p1,p2)               {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define SPP_TRACE_DEBUG3(m,p1,p2,p3)            {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define SPP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define SPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define SPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (spp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_SPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Generic Access Profile traces */
+#define GAP_TRACE_ERROR0(m)                     {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m);}
+#define GAP_TRACE_ERROR1(m,p1)                  {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m, p1);}
+#define GAP_TRACE_ERROR2(m,p1,p2)               {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define GAP_TRACE_ERROR3(m,p1,p2,p3)            {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define GAP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define GAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define GAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (gap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_GAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define GAP_TRACE_EVENT0(m)                     {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m);}
+#define GAP_TRACE_EVENT1(m,p1)                  {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m, p1);}
+#define GAP_TRACE_EVENT2(m,p1,p2)               {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define GAP_TRACE_EVENT3(m,p1,p2,p3)            {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define GAP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define GAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define GAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (gap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_GAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define GAP_TRACE_API0(m)                       {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_GAP, TRACE_TYPE_API, m);}
+#define GAP_TRACE_API1(m,p1)                    {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_GAP, TRACE_TYPE_API, m, p1);}
+#define GAP_TRACE_API2(m,p1,p2)                 {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_GAP, TRACE_TYPE_API, m,p1,p2);}
+#define GAP_TRACE_API3(m,p1,p2,p3)              {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_GAP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define GAP_TRACE_API4(m,p1,p2,p3,p4)           {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_GAP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define GAP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_GAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define GAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (gap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_GAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define GAP_TRACE_WARNING0(m)                   {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m);}
+#define GAP_TRACE_WARNING1(m,p1)                {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m, p1);}
+#define GAP_TRACE_WARNING2(m,p1,p2)             {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define GAP_TRACE_WARNING3(m,p1,p2,p3)          {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define GAP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define GAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define GAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (gap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_GAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+
+/* Define tracing for OBX
+*/
+#define OBX_TRACE_ERROR0(m)                      {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m);}
+#define OBX_TRACE_ERROR1(m,p1)                   {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1);}
+#define OBX_TRACE_ERROR2(m,p1,p2)                {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1,p2);}
+#define OBX_TRACE_ERROR3(m,p1,p2,p3)             {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define OBX_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define OBX_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define OBX_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (obx_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_OBEX, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define OBX_TRACE_WARNING0(m)                    {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m);}
+#define OBX_TRACE_WARNING1(m,p1)                 {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1);}
+#define OBX_TRACE_WARNING2(m,p1,p2)              {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1,p2);}
+#define OBX_TRACE_WARNING3(m,p1,p2,p3)           {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define OBX_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define OBX_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define OBX_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (obx_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_OBEX, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define OBX_TRACE_EVENT0(m)                      {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m);}
+#define OBX_TRACE_EVENT1(m,p1)                   {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m, p1);}
+#define OBX_TRACE_EVENT2(m,p1,p2)                {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m,p1,p2);}
+#define OBX_TRACE_EVENT3(m,p1,p2,p3)             {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define OBX_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define OBX_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define OBX_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (obx_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_OBEX, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define OBX_TRACE_DEBUG0(m)                      {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m);}
+#define OBX_TRACE_DEBUG1(m,p1)                   {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1);}
+#define OBX_TRACE_DEBUG2(m,p1,p2)                {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define OBX_TRACE_DEBUG3(m,p1,p2,p3)             {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define OBX_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define OBX_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define OBX_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (obx_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_OBEX, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define OBX_TRACE_API0(m)                        {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_OBEX, TRACE_TYPE_API, m);}
+#define OBX_TRACE_API1(m,p1)                     {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_OBEX, TRACE_TYPE_API, m, p1);}
+#define OBX_TRACE_API2(m,p1,p2)                  {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_OBEX, TRACE_TYPE_API, m,p1,p2);}
+#define OBX_TRACE_API3(m,p1,p2,p3)               {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_OBEX, TRACE_TYPE_API, m,p1,p2,p3);}
+#define OBX_TRACE_API4(m,p1,p2,p3,p4)            {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_OBEX, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define OBX_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_OBEX, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define OBX_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (obx_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_OBEX, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for OBEX application profiles
+*/
+#define GOEP_TRACE_ERROR0(m)                     {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m);}
+#define GOEP_TRACE_ERROR1(m,p1)                  {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1);}
+#define GOEP_TRACE_ERROR2(m,p1,p2)               {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define GOEP_TRACE_ERROR3(m,p1,p2,p3)            {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define GOEP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define GOEP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define GOEP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (goep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_GOEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define GOEP_TRACE_WARNING0(m)                   {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m);}
+#define GOEP_TRACE_WARNING1(m,p1)                {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1);}
+#define GOEP_TRACE_WARNING2(m,p1,p2)             {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define GOEP_TRACE_WARNING3(m,p1,p2,p3)          {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define GOEP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define GOEP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define GOEP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (goep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_GOEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define GOEP_TRACE_EVENT0(m)                     {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m);}
+#define GOEP_TRACE_EVENT1(m,p1)                  {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m, p1);}
+#define GOEP_TRACE_EVENT2(m,p1,p2)               {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define GOEP_TRACE_EVENT3(m,p1,p2,p3)            {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define GOEP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define GOEP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define GOEP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (goep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_GOEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define GOEP_TRACE_DEBUG0(m)                     {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m);}
+#define GOEP_TRACE_DEBUG1(m,p1)                  {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1);}
+#define GOEP_TRACE_DEBUG2(m,p1,p2)               {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define GOEP_TRACE_DEBUG3(m,p1,p2,p3)            {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define GOEP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define GOEP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define GOEP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (goep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_GOEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define GOEP_TRACE_API0(m)                       {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_GOEP, TRACE_TYPE_API, m);}
+#define GOEP_TRACE_API1(m,p1)                    {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_GOEP, TRACE_TYPE_API, m, p1);}
+#define GOEP_TRACE_API2(m,p1,p2)                 {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_GOEP, TRACE_TYPE_API, m,p1,p2);}
+#define GOEP_TRACE_API3(m,p1,p2,p3)              {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_GOEP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define GOEP_TRACE_API4(m,p1,p2,p3,p4)           {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_GOEP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define GOEP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_GOEP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define GOEP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (goep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_GOEP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the BPP profile
+*/
+#define BPP_TRACE_ERROR0(m)                      {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m);}
+#define BPP_TRACE_ERROR1(m,p1)                   {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1);}
+#define BPP_TRACE_ERROR2(m,p1,p2)                {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define BPP_TRACE_ERROR3(m,p1,p2,p3)             {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define BPP_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define BPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define BPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_BPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define BPP_TRACE_WARNING0(m)                    {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m);}
+#define BPP_TRACE_WARNING1(m,p1)                 {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1);}
+#define BPP_TRACE_WARNING2(m,p1,p2)              {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define BPP_TRACE_WARNING3(m,p1,p2,p3)           {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define BPP_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define BPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define BPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_BPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define BPP_TRACE_EVENT0(m)                      {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m);}
+#define BPP_TRACE_EVENT1(m,p1)                   {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m, p1);}
+#define BPP_TRACE_EVENT2(m,p1,p2)                {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define BPP_TRACE_EVENT3(m,p1,p2,p3)             {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define BPP_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define BPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define BPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_BPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define BPP_TRACE_DEBUG0(m)                      {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m);}
+#define BPP_TRACE_DEBUG1(m,p1)                   {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1);}
+#define BPP_TRACE_DEBUG2(m,p1,p2)                {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define BPP_TRACE_DEBUG3(m,p1,p2,p3)             {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define BPP_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define BPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define BPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_BPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define BPP_TRACE_API0(m)                        {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_BPP, TRACE_TYPE_API, m);}
+#define BPP_TRACE_API1(m,p1)                     {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_BPP, TRACE_TYPE_API, m, p1);}
+#define BPP_TRACE_API2(m,p1,p2)                  {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_BPP, TRACE_TYPE_API, m,p1,p2);}
+#define BPP_TRACE_API3(m,p1,p2,p3)               {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_BPP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define BPP_TRACE_API4(m,p1,p2,p3,p4)            {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_BPP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define BPP_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_BPP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define BPP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (bpp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_BPP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the BIP profile
+*/
+#define BIP_TRACE_ERROR0(m)                      {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m);}
+#define BIP_TRACE_ERROR1(m,p1)                   {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1);}
+#define BIP_TRACE_ERROR2(m,p1,p2)                {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define BIP_TRACE_ERROR3(m,p1,p2,p3)             {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define BIP_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define BIP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define BIP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (bip_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_BIP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define BIP_TRACE_WARNING0(m)                    {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m);}
+#define BIP_TRACE_WARNING1(m,p1)                 {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1);}
+#define BIP_TRACE_WARNING2(m,p1,p2)              {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define BIP_TRACE_WARNING3(m,p1,p2,p3)           {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define BIP_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define BIP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define BIP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (bip_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_BIP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define BIP_TRACE_EVENT0(m)                      {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m);}
+#define BIP_TRACE_EVENT1(m,p1)                   {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m, p1);}
+#define BIP_TRACE_EVENT2(m,p1,p2)                {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define BIP_TRACE_EVENT3(m,p1,p2,p3)             {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define BIP_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define BIP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define BIP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (bip_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_BIP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define BIP_TRACE_DEBUG0(m)                      {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m);}
+#define BIP_TRACE_DEBUG1(m,p1)                   {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1);}
+#define BIP_TRACE_DEBUG2(m,p1,p2)                {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define BIP_TRACE_DEBUG3(m,p1,p2,p3)             {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define BIP_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define BIP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define BIP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (bip_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_BIP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define BIP_TRACE_API0(m)                        {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_BIP, TRACE_TYPE_API, m);}
+#define BIP_TRACE_API1(m,p1)                     {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_BIP, TRACE_TYPE_API, m, p1);}
+#define BIP_TRACE_API2(m,p1,p2)                  {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_BIP, TRACE_TYPE_API, m,p1,p2);}
+#define BIP_TRACE_API3(m,p1,p2,p3)               {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_BIP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define BIP_TRACE_API4(m,p1,p2,p3,p4)            {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_BIP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define BIP_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_BIP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define BIP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (bip_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_BIP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for TCS
+*/
+#define TCS_TRACE_ERROR0(m)                     {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m);}
+#define TCS_TRACE_ERROR1(m,p1)                  {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1);}
+#define TCS_TRACE_ERROR2(m,p1,p2)               {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1,p2);}
+#define TCS_TRACE_ERROR3(m,p1,p2,p3)            {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define TCS_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define TCS_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define TCS_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_TCS, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define TCS_TRACE_WARNING0(m)                   {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m);}
+#define TCS_TRACE_WARNING1(m,p1)                {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1);}
+#define TCS_TRACE_WARNING2(m,p1,p2)             {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1,p2);}
+#define TCS_TRACE_WARNING3(m,p1,p2,p3)          {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define TCS_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define TCS_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define TCS_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_TCS, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define TCS_TRACE_EVENT0(m)                     {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m);}
+#define TCS_TRACE_EVENT1(m,p1)                  {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m, p1);}
+#define TCS_TRACE_EVENT2(m,p1,p2)               {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m,p1,p2);}
+#define TCS_TRACE_EVENT3(m,p1,p2,p3)            {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define TCS_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define TCS_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define TCS_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_TCS, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define TCS_TRACE_DEBUG0(m)                     {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m);}
+#define TCS_TRACE_DEBUG1(m,p1)                  {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1);}
+#define TCS_TRACE_DEBUG2(m,p1,p2)               {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define TCS_TRACE_DEBUG3(m,p1,p2,p3)            {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define TCS_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define TCS_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define TCS_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_TCS, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define TCS_TRACE_API0(m)                       {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_TCS, TRACE_TYPE_API, m);}
+#define TCS_TRACE_API1(m,p1)                    {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_TCS, TRACE_TYPE_API, m, p1);}
+#define TCS_TRACE_API2(m,p1,p2)                 {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_TCS, TRACE_TYPE_API, m,p1,p2);}
+#define TCS_TRACE_API3(m,p1,p2,p3)              {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_TCS, TRACE_TYPE_API, m,p1,p2,p3);}
+#define TCS_TRACE_API4(m,p1,p2,p3,p4)           {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_TCS, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define TCS_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_TCS, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define TCS_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (tcs_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_TCS, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for ICP
+*/
+#define ICP_TRACE_ERROR0(m)                     {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m);}
+#define ICP_TRACE_ERROR1(m,p1)                  {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1);}
+#define ICP_TRACE_ERROR2(m,p1,p2)               {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define ICP_TRACE_ERROR3(m,p1,p2,p3)            {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define ICP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define ICP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define ICP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (icp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_ICP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define ICP_TRACE_WARNING0(m)                   {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m);}
+#define ICP_TRACE_WARNING1(m,p1)                {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1);}
+#define ICP_TRACE_WARNING2(m,p1,p2)             {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define ICP_TRACE_WARNING3(m,p1,p2,p3)          {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define ICP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define ICP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define ICP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (icp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_ICP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define ICP_TRACE_EVENT0(m)                     {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m);}
+#define ICP_TRACE_EVENT1(m,p1)                  {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m, p1);}
+#define ICP_TRACE_EVENT2(m,p1,p2)               {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define ICP_TRACE_EVENT3(m,p1,p2,p3)            {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define ICP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define ICP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define ICP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (icp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_ICP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define ICP_TRACE_DEBUG0(m)                     {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m);}
+#define ICP_TRACE_DEBUG1(m,p1)                  {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1);}
+#define ICP_TRACE_DEBUG2(m,p1,p2)               {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define ICP_TRACE_DEBUG3(m,p1,p2,p3)            {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define ICP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define ICP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define ICP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (icp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_ICP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define ICP_TRACE_API0(m)                       {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_ICP, TRACE_TYPE_API, m);}
+#define ICP_TRACE_API1(m,p1)                    {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_ICP, TRACE_TYPE_API, m, p1);}
+#define ICP_TRACE_API2(m,p1,p2)                 {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_ICP, TRACE_TYPE_API, m,p1,p2);}
+#define ICP_TRACE_API3(m,p1,p2,p3)              {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_ICP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define ICP_TRACE_API4(m,p1,p2,p3,p4)           {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_ICP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define ICP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_ICP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define ICP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (icp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_ICP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* CTP */
+#define CTP_TRACE_ERROR0(m)                     {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m);}
+#define CTP_TRACE_ERROR1(m,p1)                  {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1);}
+#define CTP_TRACE_ERROR2(m,p1,p2)               {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define CTP_TRACE_ERROR3(m,p1,p2,p3)            {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define CTP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define CTP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define CTP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_CTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define CTP_TRACE_WARNING0(m)                   {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m);}
+#define CTP_TRACE_WARNING1(m,p1)                {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1);}
+#define CTP_TRACE_WARNING2(m,p1,p2)             {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define CTP_TRACE_WARNING3(m,p1,p2,p3)          {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define CTP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define CTP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define CTP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_CTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define CTP_TRACE_EVENT0(m)                     {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m);}
+#define CTP_TRACE_EVENT1(m,p1)                  {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m, p1);}
+#define CTP_TRACE_EVENT2(m,p1,p2)               {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define CTP_TRACE_EVENT3(m,p1,p2,p3)            {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define CTP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define CTP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define CTP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_CTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define CTP_TRACE_DEBUG0(m)                     {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m);}
+#define CTP_TRACE_DEBUG1(m,p1)                  {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1);}
+#define CTP_TRACE_DEBUG2(m,p1,p2)               {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define CTP_TRACE_DEBUG3(m,p1,p2,p3)            {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define CTP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define CTP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define CTP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (ctp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_CTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+
+/* define traces for HID Host */
+#define HIDH_TRACE_ERROR0(m)                     {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m);}
+#define HIDH_TRACE_ERROR1(m,p1)                  {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m, p1);}
+#define HIDH_TRACE_ERROR2(m,p1,p2)               {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HIDH_TRACE_ERROR3(m,p1,p2,p3)            {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HIDH_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HIDH_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HIDH_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (hh_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDH_TRACE_WARNING0(m)                   {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m);}
+#define HIDH_TRACE_WARNING1(m,p1)                {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1);}
+#define HIDH_TRACE_WARNING2(m,p1,p2)             {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HIDH_TRACE_WARNING3(m,p1,p2,p3)          {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HIDH_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HIDH_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HIDH_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (hh_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDH_TRACE_API0(m)                       {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_API, m);}
+#define HIDH_TRACE_API1(m,p1)                    {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_API, m, p1);}
+#define HIDH_TRACE_API2(m,p1,p2)                 {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2);}
+#define HIDH_TRACE_API3(m,p1,p2,p3)              {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3);}
+#define HIDH_TRACE_API4(m,p1,p2,p3,p4)           {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define HIDH_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define HIDH_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (hh_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDH_TRACE_EVENT0(m)                     {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m);}
+#define HIDH_TRACE_EVENT1(m,p1)                  {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m, p1);}
+#define HIDH_TRACE_EVENT2(m,p1,p2)               {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HIDH_TRACE_EVENT3(m,p1,p2,p3)            {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HIDH_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HIDH_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HIDH_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (hh_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDH_TRACE_DEBUG0(m)                     {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m);}
+#define HIDH_TRACE_DEBUG1(m,p1)                  {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1);}
+#define HIDH_TRACE_DEBUG2(m,p1,p2)               {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HIDH_TRACE_DEBUG3(m,p1,p2,p3)            {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HIDH_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HIDH_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HIDH_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (hh_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for HID Device */
+#define HIDD_TRACE_ERROR0(m)                     {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m);}
+#define HIDD_TRACE_ERROR1(m,p1)                  {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m, p1);}
+#define HIDD_TRACE_ERROR2(m,p1,p2)               {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HIDD_TRACE_ERROR3(m,p1,p2,p3)            {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HIDD_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HIDD_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HIDD_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (hd_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDD_TRACE_WARNING0(m)                   {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m);}
+#define HIDD_TRACE_WARNING1(m,p1)                {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1);}
+#define HIDD_TRACE_WARNING2(m,p1,p2)             {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HIDD_TRACE_WARNING3(m,p1,p2,p3)          {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HIDD_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HIDD_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HIDD_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (hd_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDD_TRACE_API0(m)                       {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_API, m);}
+#define HIDD_TRACE_API1(m,p1)                    {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_API, m, p1);}
+#define HIDD_TRACE_API2(m,p1,p2)                 {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2);}
+#define HIDD_TRACE_API3(m,p1,p2,p3)              {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3);}
+#define HIDD_TRACE_API4(m,p1,p2,p3,p4)           {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define HIDD_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define HIDD_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (hd_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDD_TRACE_EVENT0(m)                     {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m);}
+#define HIDD_TRACE_EVENT1(m,p1)                  {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m, p1);}
+#define HIDD_TRACE_EVENT2(m,p1,p2)               {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HIDD_TRACE_EVENT3(m,p1,p2,p3)            {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HIDD_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HIDD_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HIDD_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (hd_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HIDD_TRACE_DEBUG0(m)                     {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m);}
+#define HIDD_TRACE_DEBUG1(m,p1)                  {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1);}
+#define HIDD_TRACE_DEBUG2(m,p1,p2)               {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HIDD_TRACE_DEBUG3(m,p1,p2,p3)            {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HIDD_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HIDD_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HIDD_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (hd_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for headset profile */
+#define HSP2_TRACE_ERROR0(pcb,m)                     {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m);}
+#define HSP2_TRACE_ERROR1(pcb,m,p1)                  {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m, p1);}
+#define HSP2_TRACE_ERROR2(pcb,m,p1,p2)               {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HSP2_TRACE_ERROR3(pcb,m,p1,p2,p3)            {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HSP2_TRACE_ERROR4(pcb,m,p1,p2,p3,p4)         {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HSP2_TRACE_ERROR5(pcb,m,p1,p2,p3,p4,p5)      {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HSP2_TRACE_ERROR6(pcb,m,p1,p2,p3,p4,p5,p6)   {if (pcb->trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HSP2, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HSP2_TRACE_WARNING0(pcb,m)                   {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m);}
+#define HSP2_TRACE_WARNING1(pcb,m,p1)                {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1);}
+#define HSP2_TRACE_WARNING2(pcb,m,p1,p2)             {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HSP2_TRACE_WARNING3(pcb,m,p1,p2,p3)          {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HSP2_TRACE_WARNING4(pcb,m,p1,p2,p3,p4)       {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HSP2_TRACE_WARNING5(pcb,m,p1,p2,p3,p4,p5)    {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HSP2_TRACE_WARNING6(pcb,m,p1,p2,p3,p4,p5,p6) {if (pcb->trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HSP2, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HSP2_TRACE_API0(pcb,m)                       {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_HSP2, TRACE_TYPE_API, m);}
+#define HSP2_TRACE_API1(pcb,m,p1)                    {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_HSP2, TRACE_TYPE_API, m, p1);}
+#define HSP2_TRACE_API2(pcb,m,p1,p2)                 {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_HSP2, TRACE_TYPE_API, m,p1,p2);}
+#define HSP2_TRACE_API3(pcb,m,p1,p2,p3)              {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_HSP2, TRACE_TYPE_API, m,p1,p2,p3);}
+#define HSP2_TRACE_API4(pcb,m,p1,p2,p3,p4)           {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_HSP2, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define HSP2_TRACE_API5(pcb,m,p1,p2,p3,p4,p5)        {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_HSP2, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define HSP2_TRACE_API6(pcb,m,p1,p2,p3,p4,p5,p6)     {if (pcb->trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_HSP2, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define HSP2_TRACE_EVENT0(pcb,m)                     {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m);}
+#define HSP2_TRACE_EVENT1(pcb,m,p1)                  {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m, p1);}
+#define HSP2_TRACE_EVENT2(pcb,m,p1,p2)               {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HSP2_TRACE_EVENT3(pcb,m,p1,p2,p3)            {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HSP2_TRACE_EVENT4(pcb,m,p1,p2,p3,p4)         {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HSP2_TRACE_EVENT5(pcb,m,p1,p2,p3,p4,p5)      {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HSP2_TRACE_EVENT6(pcb,m,p1,p2,p3,p4,p5,p6)   {if (pcb->trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HSP2, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HSP2_TRACE_DEBUG0(pcb,m)                     {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m);}
+#define HSP2_TRACE_DEBUG1(pcb,m,p1)                  {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1);}
+#define HSP2_TRACE_DEBUG2(pcb,m,p1,p2)               {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HSP2_TRACE_DEBUG3(pcb,m,p1,p2,p3)            {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HSP2_TRACE_DEBUG4(pcb,m,p1,p2,p3,p4)         {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HSP2_TRACE_DEBUG5(pcb,m,p1,p2,p3,p4,p5)      {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HSP2_TRACE_DEBUG6(pcb,m,p1,p2,p3,p4,p5,p6)   {if (pcb->trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HSP2, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the NFC unit
+*/
+#define NFC_TRACE_ERROR0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m);}
+#define NFC_TRACE_ERROR1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1);}
+#define NFC_TRACE_ERROR2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1,p2);}
+#define NFC_TRACE_ERROR3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define NFC_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define NFC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define NFC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_NFC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFC_TRACE_WARNING0(m)                   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m);}
+#define NFC_TRACE_WARNING1(m,p1)                {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1);}
+#define NFC_TRACE_WARNING2(m,p1,p2)             {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1,p2);}
+#define NFC_TRACE_WARNING3(m,p1,p2,p3)          {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define NFC_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define NFC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define NFC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_NFC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFC_TRACE_API0(m)                       {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_NFC, TRACE_TYPE_API, m);}
+#define NFC_TRACE_API1(m,p1)                    {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1);}
+#define NFC_TRACE_API2(m,p1,p2)                 {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1,p2);}
+#define NFC_TRACE_API3(m,p1,p2,p3)              {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1,p2,p3);}
+#define NFC_TRACE_API4(m,p1,p2,p3,p4)           {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define NFC_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define NFC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_NFC, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFC_TRACE_EVENT0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m);}
+#define NFC_TRACE_EVENT1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m, p1);}
+#define NFC_TRACE_EVENT2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m,p1,p2);}
+#define NFC_TRACE_EVENT3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define NFC_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define NFC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define NFC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_NFC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFC_TRACE_DEBUG0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m);}
+#define NFC_TRACE_DEBUG1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1);}
+#define NFC_TRACE_DEBUG2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define NFC_TRACE_DEBUG3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define NFC_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define NFC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define NFC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_NFC, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define NCI_TRACE_ERROR0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m);}
+#define NCI_TRACE_ERROR1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1);}
+#define NCI_TRACE_ERROR2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1,p2);}
+#define NCI_TRACE_ERROR3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define NCI_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define NCI_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define NCI_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_NCI, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define NCI_TRACE_WARNING0(m)                   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m);}
+#define NCI_TRACE_WARNING1(m,p1)                {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1);}
+#define NCI_TRACE_WARNING2(m,p1,p2)             {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1,p2);}
+#define NCI_TRACE_WARNING3(m,p1,p2,p3)          {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define NCI_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define NCI_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define NCI_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_NCI, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define NCI_TRACE_API0(m)                       {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_NCI, TRACE_TYPE_API, m);}
+#define NCI_TRACE_API1(m,p1)                    {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1);}
+#define NCI_TRACE_API2(m,p1,p2)                 {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1,p2);}
+#define NCI_TRACE_API3(m,p1,p2,p3)              {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1,p2,p3);}
+#define NCI_TRACE_API4(m,p1,p2,p3,p4)           {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define NCI_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define NCI_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_NCI, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define NCI_TRACE_EVENT0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m);}
+#define NCI_TRACE_EVENT1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m, p1);}
+#define NCI_TRACE_EVENT2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m,p1,p2);}
+#define NCI_TRACE_EVENT3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define NCI_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define NCI_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define NCI_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_NCI, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define NCI_TRACE_DEBUG0(m)                     {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m);}
+#define NCI_TRACE_DEBUG1(m,p1)                  {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1);}
+#define NCI_TRACE_DEBUG2(m,p1,p2)               {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define NCI_TRACE_DEBUG3(m,p1,p2,p3)            {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define NCI_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define NCI_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define NCI_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (nfc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_NCI, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define RW_TRACE_ERROR0(m)                     {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m);}
+#define RW_TRACE_ERROR1(m,p1)                  {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1);}
+#define RW_TRACE_ERROR2(m,p1,p2)               {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1,p2);}
+#define RW_TRACE_ERROR3(m,p1,p2,p3)            {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define RW_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define RW_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define RW_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (rw_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_RW, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define RW_TRACE_WARNING0(m)                   {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m);}
+#define RW_TRACE_WARNING1(m,p1)                {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1);}
+#define RW_TRACE_WARNING2(m,p1,p2)             {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1,p2);}
+#define RW_TRACE_WARNING3(m,p1,p2,p3)          {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define RW_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define RW_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define RW_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (rw_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_RW, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define RW_TRACE_API0(m)                       {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_RW, TRACE_TYPE_API, m);}
+#define RW_TRACE_API1(m,p1)                    {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1);}
+#define RW_TRACE_API2(m,p1,p2)                 {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1,p2);}
+#define RW_TRACE_API3(m,p1,p2,p3)              {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1,p2,p3);}
+#define RW_TRACE_API4(m,p1,p2,p3,p4)           {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define RW_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define RW_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (rw_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_RW, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define RW_TRACE_EVENT0(m)                     {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m);}
+#define RW_TRACE_EVENT1(m,p1)                  {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m, p1);}
+#define RW_TRACE_EVENT2(m,p1,p2)               {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m,p1,p2);}
+#define RW_TRACE_EVENT3(m,p1,p2,p3)            {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define RW_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define RW_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define RW_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (rw_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_RW, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define RW_TRACE_DEBUG0(m)                     {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m);}
+#define RW_TRACE_DEBUG1(m,p1)                  {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1);}
+#define RW_TRACE_DEBUG2(m,p1,p2)               {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define RW_TRACE_DEBUG3(m,p1,p2,p3)            {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define RW_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define RW_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define RW_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (rw_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_RW, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define CE_TRACE_ERROR0(m)                     {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m);}
+#define CE_TRACE_ERROR1(m,p1)                  {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1);}
+#define CE_TRACE_ERROR2(m,p1,p2)               {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1,p2);}
+#define CE_TRACE_ERROR3(m,p1,p2,p3)            {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define CE_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define CE_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define CE_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (ce_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_CE, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define CE_TRACE_WARNING0(m)                   {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m);}
+#define CE_TRACE_WARNING1(m,p1)                {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1);}
+#define CE_TRACE_WARNING2(m,p1,p2)             {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1,p2);}
+#define CE_TRACE_WARNING3(m,p1,p2,p3)          {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define CE_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define CE_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define CE_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (ce_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_CE, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define CE_TRACE_API0(m)                       {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_CE, TRACE_TYPE_API, m);}
+#define CE_TRACE_API1(m,p1)                    {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1);}
+#define CE_TRACE_API2(m,p1,p2)                 {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1,p2);}
+#define CE_TRACE_API3(m,p1,p2,p3)              {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1,p2,p3);}
+#define CE_TRACE_API4(m,p1,p2,p3,p4)           {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define CE_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define CE_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (ce_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_CE, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define CE_TRACE_EVENT0(m)                     {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m);}
+#define CE_TRACE_EVENT1(m,p1)                  {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m, p1);}
+#define CE_TRACE_EVENT2(m,p1,p2)               {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m,p1,p2);}
+#define CE_TRACE_EVENT3(m,p1,p2,p3)            {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define CE_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define CE_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define CE_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (ce_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_CE, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define CE_TRACE_DEBUG0(m)                     {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m);}
+#define CE_TRACE_DEBUG1(m,p1)                  {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1);}
+#define CE_TRACE_DEBUG2(m,p1,p2)               {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define CE_TRACE_DEBUG3(m,p1,p2,p3)            {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define CE_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define CE_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define CE_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (ce_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_CE, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define NDEF_TRACE_ERROR0(m)                     {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m);}
+#define NDEF_TRACE_ERROR1(m,p1)                  {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1);}
+#define NDEF_TRACE_ERROR2(m,p1,p2)               {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1,p2);}
+#define NDEF_TRACE_ERROR3(m,p1,p2,p3)            {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define NDEF_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define NDEF_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define NDEF_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_NDEF, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define NDEF_TRACE_WARNING0(m)                   {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m);}
+#define NDEF_TRACE_WARNING1(m,p1)                {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1);}
+#define NDEF_TRACE_WARNING2(m,p1,p2)             {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1,p2);}
+#define NDEF_TRACE_WARNING3(m,p1,p2,p3)          {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define NDEF_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define NDEF_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define NDEF_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_NDEF, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define NDEF_TRACE_API0(m)                       {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_NDEF, TRACE_TYPE_API, m);}
+#define NDEF_TRACE_API1(m,p1)                    {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1);}
+#define NDEF_TRACE_API2(m,p1,p2)                 {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1,p2);}
+#define NDEF_TRACE_API3(m,p1,p2,p3)              {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1,p2,p3);}
+#define NDEF_TRACE_API4(m,p1,p2,p3,p4)           {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define NDEF_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define NDEF_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_NDEF, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define NDEF_TRACE_EVENT0(m)                     {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m);}
+#define NDEF_TRACE_EVENT1(m,p1)                  {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m, p1);}
+#define NDEF_TRACE_EVENT2(m,p1,p2)               {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m,p1,p2);}
+#define NDEF_TRACE_EVENT3(m,p1,p2,p3)            {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define NDEF_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define NDEF_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define NDEF_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_NDEF, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define NDEF_TRACE_DEBUG0(m)                     {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m);}
+#define NDEF_TRACE_DEBUG1(m,p1)                  {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1);}
+#define NDEF_TRACE_DEBUG2(m,p1,p2)               {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define NDEF_TRACE_DEBUG3(m,p1,p2,p3)            {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define NDEF_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define NDEF_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define NDEF_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (ndef_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_NDEF, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the NFA unit
+*/
+#define NFA_TRACE_ERROR0(m)                     {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m);}
+#define NFA_TRACE_ERROR1(m,p1)                  {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1);}
+#define NFA_TRACE_ERROR2(m,p1,p2)               {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1,p2);}
+#define NFA_TRACE_ERROR3(m,p1,p2,p3)            {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define NFA_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define NFA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define NFA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_NFA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFA_TRACE_WARNING0(m)                   {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m);}
+#define NFA_TRACE_WARNING1(m,p1)                {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1);}
+#define NFA_TRACE_WARNING2(m,p1,p2)             {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1,p2);}
+#define NFA_TRACE_WARNING3(m,p1,p2,p3)          {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define NFA_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define NFA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define NFA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_NFA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFA_TRACE_API0(m)                       {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_NFA, TRACE_TYPE_API, m);}
+#define NFA_TRACE_API1(m,p1)                    {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1);}
+#define NFA_TRACE_API2(m,p1,p2)                 {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1,p2);}
+#define NFA_TRACE_API3(m,p1,p2,p3)              {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1,p2,p3);}
+#define NFA_TRACE_API4(m,p1,p2,p3,p4)           {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define NFA_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define NFA_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_NFA, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFA_TRACE_EVENT0(m)                     {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m);}
+#define NFA_TRACE_EVENT1(m,p1)                  {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m, p1);}
+#define NFA_TRACE_EVENT2(m,p1,p2)               {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m,p1,p2);}
+#define NFA_TRACE_EVENT3(m,p1,p2,p3)            {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define NFA_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define NFA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define NFA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_NFA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define NFA_TRACE_DEBUG0(m)                     {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m);}
+#define NFA_TRACE_DEBUG1(m,p1)                  {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1);}
+#define NFA_TRACE_DEBUG2(m,p1,p2)               {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define NFA_TRACE_DEBUG3(m,p1,p2,p3)            {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define NFA_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define NFA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define NFA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (nfa_sys_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_NFA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define MMI_TRACE_0(m)
+#define MMI_TRACE_1(m,p1)
+#define MMI_TRACE_2(m,p1,p2)
+#define MMI_TRACE_3(m,p1,p2,p3)
+#define MMI_TRACE_4(m,p1,p2,p3,p4)
+#define MMI_TRACE_5(m,p1,p2,p3,p4,p5)
+#define MMI_TRACE_6(m,p1,p2,p3,p4,p5,p6)
+
+#define MMI_DEBUG_0(m)                           BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m)
+#define MMI_DEBUG_1(m,p1)                        BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1)
+#define MMI_DEBUG_2(m,p1,p2)                     BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2)
+#define MMI_DEBUG_3(m,p1,p2,p3)                  BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3)
+#define MMI_DEBUG_4(m,p1,p2,p3,p4)               BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4)
+#define MMI_DEBUG_5(m,p1,p2,p3,p4,p5)            BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5)
+#define MMI_DEBUG_6(m,p1,p2,p3,p4,p5,p6)         BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6)
+
+#define MMI_WARNING_0(m)                         BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m)
+#define MMI_WARNING_1(m,p1)                      BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1)
+#define MMI_WARNING_2(m,p1,p2)                   BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2)
+#define MMI_WARNING_3(m,p1,p2,p3)                BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3)
+#define MMI_WARNING_4(m,p1,p2,p3,p4)             BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4)
+#define MMI_WARNING_5(m,p1,p2,p3,p4,p5)          BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5)
+#define MMI_WARNING_6(m,p1,p2,p3,p4,p5,p6)       BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6)
+
+#define MMI_ERROR_0(m)                           BT_TRACE_0(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m)
+#define MMI_ERROR_1(m,p1)                        BT_TRACE_1(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1)
+#define MMI_ERROR_2(m,p1,p2)                     BT_TRACE_2(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2)
+#define MMI_ERROR_3(m,p1,p2,p3)                  BT_TRACE_3(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3)
+#define MMI_ERROR_4(m,p1,p2,p3,p4)               BT_TRACE_4(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4)
+#define MMI_ERROR_5(m,p1,p2,p3,p4,p5)            BT_TRACE_5(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5)
+#define MMI_ERROR_6(m,p1,p2,p3,p4,p5,p6)         BT_TRACE_6(TRACE_LAYER_HID, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6)
+
+#define TAK_TRACE_0(m)                            MMI_Echo(m)
+
+/* hid mouse module traces */
+
+#define MSKB_TRACE_0(m)                         MMI_Echo(m)
+#define MSKB_TRACE_1(m,p1)                      MMI_Echo(m,p1)
+#define MSKB_TRACE_2(m,p1,p2)                   MMI_Echo(m,p1,p2)
+#define MSKB_TRACE_3(m,p1,p2,p3)                MMI_Echo(m,p1,p2,p3)
+#define MSKB_TRACE_4(m,p1,p2,p3,p4)             MMI_Echo(m,p1,p2,p3,p4)
+#define MSKB_TRACE_5(m,p1,p2,p3,p4,p5)          MMI_Echo(m,p1,p2,p3,p4,p5)
+#define MSKB_TRACE_6(m,p1,p2,p3,p4,p5,p6)       MMI_Echo(m,p1,p2,p3,p4,p5,p6)
+
+#define MSKB_DEBUG_0(m)                         MMI_Echo(m)
+#define MSKB_DEBUG_1(m,p1)                      MMI_Echo(m,p1)
+#define MSKB_DEBUG_2(m,p1,p2)                   MMI_Echo(m,p1,p2)
+#define MSKB_DEBUG_3(m,p1,p2,p3)                MMI_Echo(m,p1,p2,p3)
+#define MSKB_DEBUG_4(m,p1,p2,p3,p4)             MMI_Echo(m,p1,p2,p3,p4)
+#define MSKB_DEBUG_5(m,p1,p2,p3,p4,p5)          MMI_Echo(m,p1,p2,p3,p4,p5)
+#define MSKB_DEBUG_6(m,p1,p2,p3,p4,p5,p6)       MMI_Echo(m,p1,p2,p3,p4,p5,p6)
+
+#define MSKB_ERROR_0(m)                         MMI_Echo(m)
+#define MSKB_ERROR_1(m,p1)                      MMI_Echo(m,p1)
+#define MSKB_ERROR_2(m,p1,p2)                   MMI_Echo(m,p1,p2)
+#define MSKB_ERROR_3(m,p1,p2,p3)                MMI_Echo(m,p1,p2,p3)
+#define MSKB_ERROR_4(m,p1,p2,p3,p4)             MMI_Echo(m,p1,p2,p3,p4)
+#define MSKB_ERROR_5(m,p1,p2,p3,p4,p5)          MMI_Echo(m,p1,p2,p3,p4,p5)
+#define MSKB_ERROR_6(m,p1,p2,p3,p4,p5,p6)       MMI_Echo(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for DUN */
+
+#define DUN_TRACE_ERROR0(m)                     {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m);}
+#define DUN_TRACE_ERROR1(m,p1)                  {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m, p1);}
+#define DUN_TRACE_ERROR2(m,p1,p2)               {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m,p1,p2);}
+#define DUN_TRACE_ERROR3(m,p1,p2,p3)            {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define DUN_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define DUN_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define DUN_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (dun_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_DUN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define DUN_TRACE_WARNING0(m)                   {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m);}
+#define DUN_TRACE_WARNING1(m,p1)                {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1);}
+#define DUN_TRACE_WARNING2(m,p1,p2)             {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1,p2);}
+#define DUN_TRACE_WARNING3(m,p1,p2,p3)          {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define DUN_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define DUN_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define DUN_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (dun_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_DUN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define DUN_TRACE_API0(m)                       {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_DUN, TRACE_TYPE_API, m);}
+#define DUN_TRACE_API1(m,p1)                    {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_DUN, TRACE_TYPE_API, m, p1);}
+#define DUN_TRACE_API2(m,p1,p2)                 {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_DUN, TRACE_TYPE_API, m,p1,p2);}
+#define DUN_TRACE_API3(m,p1,p2,p3)              {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_DUN, TRACE_TYPE_API, m,p1,p2,p3);}
+#define DUN_TRACE_API4(m,p1,p2,p3,p4)           {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_DUN, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define DUN_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_DUN, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define DUN_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (dun_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_DUN, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define DUN_TRACE_EVENT0(m)                     {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m);}
+#define DUN_TRACE_EVENT1(m,p1)                  {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m, p1);}
+#define DUN_TRACE_EVENT2(m,p1,p2)               {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m,p1,p2);}
+#define DUN_TRACE_EVENT3(m,p1,p2,p3)            {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define DUN_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define DUN_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define DUN_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (dun_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_DUN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define DUN_TRACE_DEBUG0(m)                     {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m);}
+#define DUN_TRACE_DEBUG1(m,p1)                  {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1);}
+#define DUN_TRACE_DEBUG2(m,p1,p2)               {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define DUN_TRACE_DEBUG3(m,p1,p2,p3)            {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define DUN_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define DUN_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define DUN_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (dun_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_DUN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for hardcopy cable replacement profile */
+
+#define HCRP_TRACE_ERROR0(m)                     {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m);}
+#define HCRP_TRACE_ERROR1(m,p1)                  {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m, p1);}
+#define HCRP_TRACE_ERROR2(m,p1,p2)               {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HCRP_TRACE_ERROR3(m,p1,p2,p3)            {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HCRP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HCRP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HCRP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRP_TRACE_WARNING0(m)                   {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m);}
+#define HCRP_TRACE_WARNING1(m,p1)                {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1);}
+#define HCRP_TRACE_WARNING2(m,p1,p2)             {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HCRP_TRACE_WARNING3(m,p1,p2,p3)          {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HCRP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HCRP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HCRP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRP_TRACE_API0(m)                       {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_API, m);}
+#define HCRP_TRACE_API1(m,p1)                    {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_API, m, p1);}
+#define HCRP_TRACE_API2(m,p1,p2)                 {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2);}
+#define HCRP_TRACE_API3(m,p1,p2,p3)              {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define HCRP_TRACE_API4(m,p1,p2,p3,p4)           {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define HCRP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define HCRP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRP_TRACE_EVENT0(m)                     {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m);}
+#define HCRP_TRACE_EVENT1(m,p1)                  {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m, p1);}
+#define HCRP_TRACE_EVENT2(m,p1,p2)               {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HCRP_TRACE_EVENT3(m,p1,p2,p3)            {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HCRP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HCRP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HCRP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRP_TRACE_DEBUG0(m)                     {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m);}
+#define HCRP_TRACE_DEBUG1(m,p1)                  {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1);}
+#define HCRP_TRACE_DEBUG2(m,p1,p2)               {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HCRP_TRACE_DEBUG3(m,p1,p2,p3)            {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HCRP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HCRP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HCRP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (hcrp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for multi-client server hardcopy cable replacement profile */
+
+#define HCRPM_TRACE_ERROR0(m)                     {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m);}
+#define HCRPM_TRACE_ERROR1(m,p1)                  {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m, p1);}
+#define HCRPM_TRACE_ERROR2(m,p1,p2)               {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define HCRPM_TRACE_ERROR3(m,p1,p2,p3)            {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define HCRPM_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define HCRPM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define HCRPM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRPM_TRACE_WARNING0(m)                   {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m);}
+#define HCRPM_TRACE_WARNING1(m,p1)                {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1);}
+#define HCRPM_TRACE_WARNING2(m,p1,p2)             {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define HCRPM_TRACE_WARNING3(m,p1,p2,p3)          {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define HCRPM_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define HCRPM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define HCRPM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRPM_TRACE_API0(m)                       {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_API, m);}
+#define HCRPM_TRACE_API1(m,p1)                    {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_API, m, p1);}
+#define HCRPM_TRACE_API2(m,p1,p2)                 {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2);}
+#define HCRPM_TRACE_API3(m,p1,p2,p3)              {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define HCRPM_TRACE_API4(m,p1,p2,p3,p4)           {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define HCRPM_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define HCRPM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRPM_TRACE_EVENT0(m)                     {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m);}
+#define HCRPM_TRACE_EVENT1(m,p1)                  {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m, p1);}
+#define HCRPM_TRACE_EVENT2(m,p1,p2)               {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define HCRPM_TRACE_EVENT3(m,p1,p2,p3)            {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define HCRPM_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define HCRPM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define HCRPM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define HCRPM_TRACE_DEBUG0(m)                     {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m);}
+#define HCRPM_TRACE_DEBUG1(m,p1)                  {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1);}
+#define HCRPM_TRACE_DEBUG2(m,p1,p2)               {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define HCRPM_TRACE_DEBUG3(m,p1,p2,p3)            {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define HCRPM_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define HCRPM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define HCRPM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (hcrpm_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_HCRP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for RPC */
+
+#define RPC_TRACE_ERROR0(m)                      {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, (m));}
+#define RPC_TRACE_ERROR1(m,p1)                   {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1));}
+#define RPC_TRACE_ERROR2(m,p1,p2)                {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define RPC_TRACE_ERROR3(m,p1,p2,p3)             {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define RPC_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define RPC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define RPC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (rpc_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define RPC_TRACE_WARNING0(m)                    {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, (m));}
+#define RPC_TRACE_WARNING1(m,p1)                 {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1));}
+#define RPC_TRACE_WARNING2(m,p1,p2)              {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define RPC_TRACE_WARNING3(m,p1,p2,p3)           {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define RPC_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define RPC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define RPC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (rpc_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define RPC_TRACE_API0(m)                        {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, (m));}
+#define RPC_TRACE_API1(m,p1)                     {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1));}
+#define RPC_TRACE_API2(m,p1,p2)                  {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define RPC_TRACE_API3(m,p1,p2,p3)               {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define RPC_TRACE_API4(m,p1,p2,p3,p4)            {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define RPC_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define RPC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (rpc_trace_level >= BT_TRACE_LEVEL_API) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define RPC_TRACE_EVENT0(m)                      {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, (m));}
+#define RPC_TRACE_EVENT1(m,p1)                   {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1));}
+#define RPC_TRACE_EVENT2(m,p1,p2)                {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define RPC_TRACE_EVENT3(m,p1,p2,p3)             {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define RPC_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define RPC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define RPC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (rpc_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define RPC_TRACE_DEBUG0(m)                      {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, (m));}
+#define RPC_TRACE_DEBUG1(m,p1)                   {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1));}
+#define RPC_TRACE_DEBUG2(m,p1,p2)                {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define RPC_TRACE_DEBUG3(m,p1,p2,p3)             {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define RPC_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define RPC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define RPC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (rpc_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_RPC | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+/* define traces for BNEP */
+
+#define BNEP_TRACE_ERROR0(m)                     {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m);}
+#define BNEP_TRACE_ERROR1(m,p1)                  {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m, p1);}
+#define BNEP_TRACE_ERROR2(m,p1,p2)               {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define BNEP_TRACE_ERROR3(m,p1,p2,p3)            {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define BNEP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define BNEP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define BNEP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_BNEP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define BNEP_TRACE_WARNING0(m)                   {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m);}
+#define BNEP_TRACE_WARNING1(m,p1)                {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1);}
+#define BNEP_TRACE_WARNING2(m,p1,p2)             {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define BNEP_TRACE_WARNING3(m,p1,p2,p3)          {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define BNEP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define BNEP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define BNEP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_BNEP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define BNEP_TRACE_API0(m)                       {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_BNEP, TRACE_TYPE_API, m);}
+#define BNEP_TRACE_API1(m,p1)                    {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_BNEP, TRACE_TYPE_API, m, p1);}
+#define BNEP_TRACE_API2(m,p1,p2)                 {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_BNEP, TRACE_TYPE_API, m,p1,p2);}
+#define BNEP_TRACE_API3(m,p1,p2,p3)              {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_BNEP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define BNEP_TRACE_API4(m,p1,p2,p3,p4)           {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_BNEP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define BNEP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_BNEP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define BNEP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_BNEP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define BNEP_TRACE_EVENT0(m)                     {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m);}
+#define BNEP_TRACE_EVENT1(m,p1)                  {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m, p1);}
+#define BNEP_TRACE_EVENT2(m,p1,p2)               {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define BNEP_TRACE_EVENT3(m,p1,p2,p3)            {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define BNEP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define BNEP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define BNEP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_BNEP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define BNEP_TRACE_DEBUG0(m)                     {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m);}
+#define BNEP_TRACE_DEBUG1(m,p1)                  {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1);}
+#define BNEP_TRACE_DEBUG2(m,p1,p2)               {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define BNEP_TRACE_DEBUG3(m,p1,p2,p3)            {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define BNEP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define BNEP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define BNEP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (bnep_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_BNEP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for PAN */
+
+#define PAN_TRACE_ERROR0(m)                     {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m);}
+#define PAN_TRACE_ERROR1(m,p1)                  {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m, p1);}
+#define PAN_TRACE_ERROR2(m,p1,p2)               {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m,p1,p2);}
+#define PAN_TRACE_ERROR3(m,p1,p2,p3)            {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define PAN_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define PAN_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define PAN_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (pan_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_PAN, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define PAN_TRACE_WARNING0(m)                   {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m);}
+#define PAN_TRACE_WARNING1(m,p1)                {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1);}
+#define PAN_TRACE_WARNING2(m,p1,p2)             {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1,p2);}
+#define PAN_TRACE_WARNING3(m,p1,p2,p3)          {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define PAN_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define PAN_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define PAN_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (pan_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_PAN, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define PAN_TRACE_API0(m)                       {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_PAN, TRACE_TYPE_API, m);}
+#define PAN_TRACE_API1(m,p1)                    {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_PAN, TRACE_TYPE_API, m, p1);}
+#define PAN_TRACE_API2(m,p1,p2)                 {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_PAN, TRACE_TYPE_API, m,p1,p2);}
+#define PAN_TRACE_API3(m,p1,p2,p3)              {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_PAN, TRACE_TYPE_API, m,p1,p2,p3);}
+#define PAN_TRACE_API4(m,p1,p2,p3,p4)           {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_PAN, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define PAN_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_PAN, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define PAN_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (pan_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_PAN, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define PAN_TRACE_EVENT0(m)                     {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m);}
+#define PAN_TRACE_EVENT1(m,p1)                  {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m, p1);}
+#define PAN_TRACE_EVENT2(m,p1,p2)               {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m,p1,p2);}
+#define PAN_TRACE_EVENT3(m,p1,p2,p3)            {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define PAN_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define PAN_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define PAN_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (pan_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_PAN, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define PAN_TRACE_DEBUG0(m)                     {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m);}
+#define PAN_TRACE_DEBUG1(m,p1)                  {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1);}
+#define PAN_TRACE_DEBUG2(m,p1,p2)               {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define PAN_TRACE_DEBUG3(m,p1,p2,p3)            {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define PAN_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define PAN_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define PAN_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (pan_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_PAN, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* define traces for SIM */
+
+#define SAP_TRACE_ERROR0(m)                     {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m);}
+#define SAP_TRACE_ERROR1(m,p1)                  {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m, p1);}
+#define SAP_TRACE_ERROR2(m,p1,p2)               {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define SAP_TRACE_ERROR3(m,p1,p2,p3)            {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define SAP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define SAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define SAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (sap_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_SAP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define SAP_TRACE_WARNING0(m)                   {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m);}
+#define SAP_TRACE_WARNING1(m,p1)                {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1);}
+#define SAP_TRACE_WARNING2(m,p1,p2)             {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define SAP_TRACE_WARNING3(m,p1,p2,p3)          {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define SAP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define SAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define SAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (sap_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_SAP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define SAP_TRACE_API0(m)                       {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_SAP, TRACE_TYPE_API, m);}
+#define SAP_TRACE_API1(m,p1)                    {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_SAP, TRACE_TYPE_API, m, p1);}
+#define SAP_TRACE_API2(m,p1,p2)                 {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_SAP, TRACE_TYPE_API, m,p1,p2);}
+#define SAP_TRACE_API3(m,p1,p2,p3)              {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_SAP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define SAP_TRACE_API4(m,p1,p2,p3,p4)           {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_SAP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define SAP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_SAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define SAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (sap_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_SAP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define SAP_TRACE_EVENT0(m)                     {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m);}
+#define SAP_TRACE_EVENT1(m,p1)                  {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m, p1);}
+#define SAP_TRACE_EVENT2(m,p1,p2)               {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define SAP_TRACE_EVENT3(m,p1,p2,p3)            {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define SAP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define SAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define SAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (sap_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_SAP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define SAP_TRACE_DEBUG0(m)                     {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m);}
+#define SAP_TRACE_DEBUG1(m,p1)                  {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1);}
+#define SAP_TRACE_DEBUG2(m,p1,p2)               {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define SAP_TRACE_DEBUG3(m,p1,p2,p3)            {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define SAP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define SAP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define SAP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (sap_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_SAP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for OPP profile
+*/
+#define OPP_TRACE_ERROR0(m)                      {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m);}
+#define OPP_TRACE_ERROR1(m,p1)                   {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1);}
+#define OPP_TRACE_ERROR2(m,p1,p2)                {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define OPP_TRACE_ERROR3(m,p1,p2,p3)             {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define OPP_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define OPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define OPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (opp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_OPP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define OPP_TRACE_WARNING0(m)                    {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m);}
+#define OPP_TRACE_WARNING1(m,p1)                 {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1);}
+#define OPP_TRACE_WARNING2(m,p1,p2)              {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define OPP_TRACE_WARNING3(m,p1,p2,p3)           {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define OPP_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define OPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define OPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (opp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_OPP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define OPP_TRACE_EVENT0(m)                      {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m);}
+#define OPP_TRACE_EVENT1(m,p1)                   {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m, p1);}
+#define OPP_TRACE_EVENT2(m,p1,p2)                {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define OPP_TRACE_EVENT3(m,p1,p2,p3)             {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define OPP_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define OPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define OPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (opp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_OPP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define OPP_TRACE_DEBUG0(m)                      {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m);}
+#define OPP_TRACE_DEBUG1(m,p1)                   {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1);}
+#define OPP_TRACE_DEBUG2(m,p1,p2)                {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define OPP_TRACE_DEBUG3(m,p1,p2,p3)             {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define OPP_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define OPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define OPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (opp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_OPP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for FTP profile
+*/
+#define FTP_TRACE_ERROR0(m)                      {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m);}
+#define FTP_TRACE_ERROR1(m,p1)                   {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1);}
+#define FTP_TRACE_ERROR2(m,p1,p2)                {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define FTP_TRACE_ERROR3(m,p1,p2,p3)             {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define FTP_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define FTP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define FTP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_FTP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define FTP_TRACE_WARNING0(m)                    {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m);}
+#define FTP_TRACE_WARNING1(m,p1)                 {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1);}
+#define FTP_TRACE_WARNING2(m,p1,p2)              {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define FTP_TRACE_WARNING3(m,p1,p2,p3)           {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define FTP_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define FTP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define FTP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_FTP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define FTP_TRACE_EVENT0(m)                      {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m);}
+#define FTP_TRACE_EVENT1(m,p1)                   {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m, p1);}
+#define FTP_TRACE_EVENT2(m,p1,p2)                {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define FTP_TRACE_EVENT3(m,p1,p2,p3)             {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define FTP_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define FTP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define FTP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_FTP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define FTP_TRACE_DEBUG0(m)                      {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m);}
+#define FTP_TRACE_DEBUG1(m,p1)                   {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1);}
+#define FTP_TRACE_DEBUG2(m,p1,p2)                {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define FTP_TRACE_DEBUG3(m,p1,p2,p3)             {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define FTP_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define FTP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define FTP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (ftp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_FTP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the A2DP profile
+*/
+#define A2D_TRACE_ERROR0(m)                      {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m);}
+#define A2D_TRACE_ERROR1(m,p1)                   {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1);}
+#define A2D_TRACE_ERROR2(m,p1,p2)                {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1,p2);}
+#define A2D_TRACE_ERROR3(m,p1,p2,p3)             {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1,p2,p3);}
+#define A2D_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1,p2,p3,p4);}
+#define A2D_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5);}
+#define A2D_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_A2D, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5,p6);}
+
+#define A2D_TRACE_WARNING0(m)                    {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m);}
+#define A2D_TRACE_WARNING1(m,p1)                 {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1);}
+#define A2D_TRACE_WARNING2(m,p1,p2)              {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1,p2);}
+#define A2D_TRACE_WARNING3(m,p1,p2,p3)           {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1,p2,p3);}
+#define A2D_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1,p2,p3,p4);}
+#define A2D_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5);}
+#define A2D_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_A2D, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5,p6);}
+
+#define A2D_TRACE_EVENT0(m)                      {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m);}
+#define A2D_TRACE_EVENT1(m,p1)                   {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m, p1);}
+#define A2D_TRACE_EVENT2(m,p1,p2)                {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m,p1,p2);}
+#define A2D_TRACE_EVENT3(m,p1,p2,p3)             {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m,p1,p2,p3);}
+#define A2D_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m,p1,p2,p3,p4);}
+#define A2D_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5);}
+#define A2D_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_A2D, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5,p6);}
+
+#define A2D_TRACE_DEBUG0(m)                      {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m);}
+#define A2D_TRACE_DEBUG1(m,p1)                   {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1);}
+#define A2D_TRACE_DEBUG2(m,p1,p2)                {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1,p2);}
+#define A2D_TRACE_DEBUG3(m,p1,p2,p3)             {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1,p2,p3);}
+#define A2D_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4);}
+#define A2D_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5);}
+#define A2D_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_A2D, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5,p6);}
+
+#define A2D_TRACE_API0(m)                        {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_A2D, TRACE_TYPE_API,m);}
+#define A2D_TRACE_API1(m,p1)                     {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_A2D, TRACE_TYPE_API,m, p1);}
+#define A2D_TRACE_API2(m,p1,p2)                  {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_A2D, TRACE_TYPE_API,m,p1,p2);}
+#define A2D_TRACE_API3(m,p1,p2,p3)               {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_A2D, TRACE_TYPE_API,m,p1,p2,p3);}
+#define A2D_TRACE_API4(m,p1,p2,p3,p4)            {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_A2D, TRACE_TYPE_API,m,p1,p2,p3,p4);}
+#define A2D_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_A2D, TRACE_TYPE_API,m,p1,p2,p3,p4,p5);}
+#define A2D_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (a2d_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_A2D, TRACE_TYPE_API,m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the VDP profile
+*/
+#define VDP_TRACE_ERROR0(m)                      {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m);}
+#define VDP_TRACE_ERROR1(m,p1)                   {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1);}
+#define VDP_TRACE_ERROR2(m,p1,p2)                {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2);}
+#define VDP_TRACE_ERROR3(m,p1,p2,p3)             {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3);}
+#define VDP_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4);}
+#define VDP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5);}
+#define VDP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5,p6);}
+
+#define VDP_TRACE_WARNING0(m)                    {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m);}
+#define VDP_TRACE_WARNING1(m,p1)                 {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1);}
+#define VDP_TRACE_WARNING2(m,p1,p2)              {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2);}
+#define VDP_TRACE_WARNING3(m,p1,p2,p3)           {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3);}
+#define VDP_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4);}
+#define VDP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5);}
+#define VDP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5,p6);}
+
+#define VDP_TRACE_EVENT0(m)                      {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m);}
+#define VDP_TRACE_EVENT1(m,p1)                   {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m, p1);}
+#define VDP_TRACE_EVENT2(m,p1,p2)                {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2);}
+#define VDP_TRACE_EVENT3(m,p1,p2,p3)             {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3);}
+#define VDP_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4);}
+#define VDP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5);}
+#define VDP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5,p6);}
+
+#define VDP_TRACE_DEBUG0(m)                      {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m);}
+#define VDP_TRACE_DEBUG1(m,p1)                   {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1);}
+#define VDP_TRACE_DEBUG2(m,p1,p2)                {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2);}
+#define VDP_TRACE_DEBUG3(m,p1,p2,p3)             {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3);}
+#define VDP_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4);}
+#define VDP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5);}
+#define VDP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5,p6);}
+
+#define VDP_TRACE_API0(m)                        {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_API,m);}
+#define VDP_TRACE_API1(m,p1)                     {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_API,m, p1);}
+#define VDP_TRACE_API2(m,p1,p2)                  {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2);}
+#define VDP_TRACE_API3(m,p1,p2,p3)               {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3);}
+#define VDP_TRACE_API4(m,p1,p2,p3,p4)            {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4);}
+#define VDP_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4,p5);}
+#define VDP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (vdp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4,p5,p6);}
+
+
+/* Define tracing for the LM unit
+*/
+#define LMP_TRACE_ERROR0(m)                     {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m);}
+#define LMP_TRACE_ERROR1(m,p1)                  {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1);}
+#define LMP_TRACE_ERROR2(m,p1,p2)               {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1,p2);}
+#define LMP_TRACE_ERROR3(m,p1,p2,p3)            {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define LMP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define LMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define LMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (lmp_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_LM, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define LMP_TRACE_WARNING0(m)                   {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m);}
+#define LMP_TRACE_WARNING1(m,p1)                {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1);}
+#define LMP_TRACE_WARNING2(m,p1,p2)             {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1,p2);}
+#define LMP_TRACE_WARNING3(m,p1,p2,p3)          {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define LMP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define LMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define LMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (lmp_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_LM, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define LMP_TRACE_EVENT0(m)                     {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m);}
+#define LMP_TRACE_EVENT1(m,p1)                  {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m, p1);}
+#define LMP_TRACE_EVENT2(m,p1,p2)               {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m,p1,p2);}
+#define LMP_TRACE_EVENT3(m,p1,p2,p3)            {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define LMP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define LMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define LMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (lmp_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_LM, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define LMP_TRACE_DEBUG0(m)                     {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m);}
+#define LMP_TRACE_DEBUG1(m,p1)                  {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1);}
+#define LMP_TRACE_DEBUG2(m,p1,p2)               {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define LMP_TRACE_DEBUG3(m,p1,p2,p3)            {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define LMP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define LMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define LMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (lmp_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_LM, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the LC unit
+*/
+#define LC_TRACE_ERROR0(m)                     {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_0(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m);}
+#define LC_TRACE_ERROR1(m,p1)                  {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_1(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1);}
+#define LC_TRACE_ERROR2(m,p1,p2)               {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_2(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1,p2);}
+#define LC_TRACE_ERROR3(m,p1,p2,p3)            {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_3(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define LC_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_4(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define LC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_5(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define LC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_ERROR]) BT_TRACE_6(TRACE_LAYER_LC, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define LC_TRACE_WARNING0(m)                   {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_0(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m);}
+#define LC_TRACE_WARNING1(m,p1)                {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_1(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1);}
+#define LC_TRACE_WARNING2(m,p1,p2)             {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_2(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1,p2);}
+#define LC_TRACE_WARNING3(m,p1,p2,p3)          {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_3(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define LC_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_4(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define LC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_5(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define LC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_WARNING]) BT_TRACE_6(TRACE_LAYER_LC, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define LC_TRACE_EVENT0(m)                     {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_0(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m);}
+#define LC_TRACE_EVENT1(m,p1)                  {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_1(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m, p1);}
+#define LC_TRACE_EVENT2(m,p1,p2)               {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_2(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m,p1,p2);}
+#define LC_TRACE_EVENT3(m,p1,p2,p3)            {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_3(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define LC_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_4(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define LC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_5(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define LC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_EVENT]) BT_TRACE_6(TRACE_LAYER_LC, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define LC_TRACE_DEBUG0(m)                     {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_0(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m);}
+#define LC_TRACE_DEBUG1(m,p1)                  {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_1(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m,p1);}
+#define LC_TRACE_DEBUG2(m,p1,p2)               {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_2(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define LC_TRACE_DEBUG3(m,p1,p2,p3)            {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_3(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define LC_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_5(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define LC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (lc_trace_level & trace_map[BT_TRACE_LEVEL_DEBUG]) BT_TRACE_6(TRACE_LAYER_LC, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the Serial Dongle Application SDA
+*/
+#define SDA_TRACE_ERROR0(m)                     {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(m);}
+#define SDA_TRACE_ERROR1(m,p1)                  {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(m,p1);}
+#define SDA_TRACE_ERROR2(m,p1,p2)               {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(m,p1,p2);}
+#define SDA_TRACE_ERROR3(m,p1,p2,p3)            {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(m,p1,p2,p3);}
+#define SDA_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(m,p1,p2,p3,p4);}
+#define SDA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(m,p1,p2,p3,p4,p5);}
+#define SDA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(m,p1,p2,p3,p4,p5,p6);}
+
+#define SDA_TRACE_WARNING0(m)                   {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(m);}
+#define SDA_TRACE_WARNING1(m,p1)                {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(m,p1);}
+#define SDA_TRACE_WARNING2(m,p1,p2)             {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(m,p1,p2);}
+#define SDA_TRACE_WARNING3(m,p1,p2,p3)          {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(m,p1,p2,p3);}
+#define SDA_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(m,p1,p2,p3,p4);}
+#define SDA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(m,p1,p2,p3,p4,p5);}
+#define SDA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(m,p1,p2,p3,p4,p5,p6);}
+
+#define SDA_TRACE_EVENT0(m)                     {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(m);}
+#define SDA_TRACE_EVENT1(m,p1)                  {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(m, p1);}
+#define SDA_TRACE_EVENT2(m,p1,p2)               {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(m,p1,p2);}
+#define SDA_TRACE_EVENT3(m,p1,p2,p3)            {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(m,p1,p2,p3);}
+#define SDA_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(m,p1,p2,p3,p4);}
+#define SDA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(m,p1,p2,p3,p4,p5);}
+#define SDA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(m,p1,p2,p3,p4,p5,p6);}
+
+#define SDA_TRACE_DEBUG0(m)                     {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(m);}
+#define SDA_TRACE_DEBUG1(m,p1)                  {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(m,p1);}
+#define SDA_TRACE_DEBUG2(m,p1,p2)               {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(m,p1,p2);}
+#define SDA_TRACE_DEBUG3(m,p1,p2,p3)            {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(m,p1,p2,p3);}
+#define SDA_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(m,p1,p2,p3,p4);}
+#define SDA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(m,p1,p2,p3,p4,p5);}
+#define SDA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (sda_config_cb.sda_trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(m,p1,p2,p3,p4,p5,p6);}
+
+/* AVDTP
+*/
+#define AVDT_TRACE_ERROR0(m)                     {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m);}
+#define AVDT_TRACE_ERROR1(m,p1)                  {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1);}
+#define AVDT_TRACE_ERROR2(m,p1,p2)               {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define AVDT_TRACE_ERROR3(m,p1,p2,p3)            {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define AVDT_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define AVDT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define AVDT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVDT_TRACE_WARNING0(m)                   {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m);}
+#define AVDT_TRACE_WARNING1(m,p1)                {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1);}
+#define AVDT_TRACE_WARNING2(m,p1,p2)             {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define AVDT_TRACE_WARNING3(m,p1,p2,p3)          {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define AVDT_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define AVDT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define AVDT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVDT_TRACE_EVENT0(m)                     {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m);}
+#define AVDT_TRACE_EVENT1(m,p1)                  {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m, p1);}
+#define AVDT_TRACE_EVENT2(m,p1,p2)               {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define AVDT_TRACE_EVENT3(m,p1,p2,p3)            {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define AVDT_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define AVDT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define AVDT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVDT_TRACE_DEBUG0(m)                     {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m);}
+#define AVDT_TRACE_DEBUG1(m,p1)                  {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1);}
+#define AVDT_TRACE_DEBUG2(m,p1,p2)               {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define AVDT_TRACE_DEBUG3(m,p1,p2,p3)            {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define AVDT_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define AVDT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define AVDT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVDT_TRACE_API0(m)                     {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_API, m);}
+#define AVDT_TRACE_API1(m,p1)                  {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1);}
+#define AVDT_TRACE_API2(m,p1,p2)               {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2);}
+#define AVDT_TRACE_API3(m,p1,p2,p3)            {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define AVDT_TRACE_API4(m,p1,p2,p3,p4)         {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define AVDT_TRACE_API5(m,p1,p2,p3,p4,p5)      {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define AVDT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)   {if (avdt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the AVCTP protocol
+*/
+#define AVCT_TRACE_ERROR0(m)                     {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m);}
+#define AVCT_TRACE_ERROR1(m,p1)                  {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1);}
+#define AVCT_TRACE_ERROR2(m,p1,p2)               {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define AVCT_TRACE_ERROR3(m,p1,p2,p3)            {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define AVCT_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define AVCT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define AVCT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (avct_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVCT_TRACE_WARNING0(m)                   {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m);}
+#define AVCT_TRACE_WARNING1(m,p1)                {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1);}
+#define AVCT_TRACE_WARNING2(m,p1,p2)             {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define AVCT_TRACE_WARNING3(m,p1,p2,p3)          {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define AVCT_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define AVCT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define AVCT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (avct_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVCT_TRACE_EVENT0(m)                     {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m);}
+#define AVCT_TRACE_EVENT1(m,p1)                  {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m, p1);}
+#define AVCT_TRACE_EVENT2(m,p1,p2)               {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define AVCT_TRACE_EVENT3(m,p1,p2,p3)            {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define AVCT_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define AVCT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define AVCT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (avct_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVCT_TRACE_DEBUG0(m)                     {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m);}
+#define AVCT_TRACE_DEBUG1(m,p1)                  {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1);}
+#define AVCT_TRACE_DEBUG2(m,p1,p2)               {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define AVCT_TRACE_DEBUG3(m,p1,p2,p3)            {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define AVCT_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define AVCT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define AVCT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (avct_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define AVCT_TRACE_API0(m)                     {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_API, m);}
+#define AVCT_TRACE_API1(m,p1)                  {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1);}
+#define AVCT_TRACE_API2(m,p1,p2)               {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2);}
+#define AVCT_TRACE_API3(m,p1,p2,p3)            {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define AVCT_TRACE_API4(m,p1,p2,p3,p4)         {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define AVCT_TRACE_API5(m,p1,p2,p3,p4,p5)      {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define AVCT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)   {if (avct_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+
+/* Define tracing for the AVRCP profile
+*/
+#define AVRC_TRACE_ERROR0(m)                      {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m);}
+#define AVRC_TRACE_ERROR1(m,p1)                   {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1);}
+#define AVRC_TRACE_ERROR2(m,p1,p2)                {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2);}
+#define AVRC_TRACE_ERROR3(m,p1,p2,p3)             {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3);}
+#define AVRC_TRACE_ERROR4(m,p1,p2,p3,p4)          {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4);}
+#define AVRC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5);}
+#define AVRC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5,p6);}
+
+#define AVRC_TRACE_WARNING0(m)                    {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m);}
+#define AVRC_TRACE_WARNING1(m,p1)                 {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1);}
+#define AVRC_TRACE_WARNING2(m,p1,p2)              {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2);}
+#define AVRC_TRACE_WARNING3(m,p1,p2,p3)           {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3);}
+#define AVRC_TRACE_WARNING4(m,p1,p2,p3,p4)        {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4);}
+#define AVRC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)     {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5);}
+#define AVRC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)  {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_WARNING,m,p1,p2,p3,p4,p5,p6);}
+
+#define AVRC_TRACE_EVENT0(m)                      {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m);}
+#define AVRC_TRACE_EVENT1(m,p1)                   {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m, p1);}
+#define AVRC_TRACE_EVENT2(m,p1,p2)                {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2);}
+#define AVRC_TRACE_EVENT3(m,p1,p2,p3)             {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3);}
+#define AVRC_TRACE_EVENT4(m,p1,p2,p3,p4)          {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4);}
+#define AVRC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)       {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5);}
+#define AVRC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)    {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_EVENT,m,p1,p2,p3,p4,p5,p6);}
+
+#define AVRC_TRACE_DEBUG0(m)                      {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m);}
+#define AVRC_TRACE_DEBUG1(m,p1)                   {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1);}
+#define AVRC_TRACE_DEBUG2(m,p1,p2)                {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2);}
+#define AVRC_TRACE_DEBUG3(m,p1,p2,p3)             {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3);}
+#define AVRC_TRACE_DEBUG4(m,p1,p2,p3,p4)          {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4);}
+#define AVRC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)       {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5);}
+#define AVRC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)    {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_DEBUG,m,p1,p2,p3,p4,p5,p6);}
+
+#define AVRC_TRACE_API0(m)                        {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_AVP, TRACE_TYPE_API,m);}
+#define AVRC_TRACE_API1(m,p1)                     {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_AVP, TRACE_TYPE_API,m, p1);}
+#define AVRC_TRACE_API2(m,p1,p2)                  {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2);}
+#define AVRC_TRACE_API3(m,p1,p2,p3)               {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3);}
+#define AVRC_TRACE_API4(m,p1,p2,p3,p4)            {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4);}
+#define AVRC_TRACE_API5(m,p1,p2,p3,p4,p5)         {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4,p5);}
+#define AVRC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)      {if (avrc_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_AVP, TRACE_TYPE_API,m,p1,p2,p3,p4,p5,p6);}
+
+/* MCAP
+*/
+#define MCA_TRACE_ERROR0(m)                     {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m);}
+#define MCA_TRACE_ERROR1(m,p1)                  {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1);}
+#define MCA_TRACE_ERROR2(m,p1,p2)               {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1,p2);}
+#define MCA_TRACE_ERROR3(m,p1,p2,p3)            {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define MCA_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define MCA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define MCA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (mca_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_MCA, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define MCA_TRACE_WARNING0(m)                   {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m);}
+#define MCA_TRACE_WARNING1(m,p1)                {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1);}
+#define MCA_TRACE_WARNING2(m,p1,p2)             {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1,p2);}
+#define MCA_TRACE_WARNING3(m,p1,p2,p3)          {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define MCA_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define MCA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define MCA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (mca_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_MCA, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define MCA_TRACE_EVENT0(m)                     {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m);}
+#define MCA_TRACE_EVENT1(m,p1)                  {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m, p1);}
+#define MCA_TRACE_EVENT2(m,p1,p2)               {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m,p1,p2);}
+#define MCA_TRACE_EVENT3(m,p1,p2,p3)            {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define MCA_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define MCA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define MCA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (mca_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_MCA, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define MCA_TRACE_DEBUG0(m)                     {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m);}
+#define MCA_TRACE_DEBUG1(m,p1)                  {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1);}
+#define MCA_TRACE_DEBUG2(m,p1,p2)               {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define MCA_TRACE_DEBUG3(m,p1,p2,p3)            {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define MCA_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define MCA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define MCA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (mca_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_MCA, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+#define MCA_TRACE_API0(m)                     {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_MCA, TRACE_TYPE_API, m);}
+#define MCA_TRACE_API1(m,p1)                  {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1);}
+#define MCA_TRACE_API2(m,p1,p2)               {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1,p2);}
+#define MCA_TRACE_API3(m,p1,p2,p3)            {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1,p2,p3);}
+#define MCA_TRACE_API4(m,p1,p2,p3,p4)         {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define MCA_TRACE_API5(m,p1,p2,p3,p4,p5)      {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define MCA_TRACE_API6(m,p1,p2,p3,p4,p5,p6)   {if (mca_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_MCA, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the AMP unit
+*/
+#define AMP_TRACE_ERROR0(m)                     {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m);}
+#define AMP_TRACE_ERROR1(m,p1)                  {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1);}
+#define AMP_TRACE_ERROR2(m,p1,p2)               {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define AMP_TRACE_ERROR3(m,p1,p2,p3)            {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define AMP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define AMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define AMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (amp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_AMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define AMP_TRACE_WARNING0(m)                   {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m);}
+#define AMP_TRACE_WARNING1(m,p1)                {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1);}
+#define AMP_TRACE_WARNING2(m,p1,p2)             {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define AMP_TRACE_WARNING3(m,p1,p2,p3)          {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define AMP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define AMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define AMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (amp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_AMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define AMP_TRACE_API0(m)                       {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_AMP, TRACE_TYPE_API, m);}
+#define AMP_TRACE_API1(m,p1)                    {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1);}
+#define AMP_TRACE_API2(m,p1,p2)                 {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1,p2);}
+#define AMP_TRACE_API3(m,p1,p2,p3)              {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define AMP_TRACE_API4(m,p1,p2,p3,p4)           {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define AMP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define AMP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (amp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_AMP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define AMP_TRACE_EVENT0(m)                     {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m);}
+#define AMP_TRACE_EVENT1(m,p1)                  {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m, p1);}
+#define AMP_TRACE_EVENT2(m,p1,p2)               {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define AMP_TRACE_EVENT3(m,p1,p2,p3)            {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define AMP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define AMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define AMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (amp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_AMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define AMP_TRACE_DEBUG0(m)                     {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m);}
+#define AMP_TRACE_DEBUG1(m,p1)                  {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1);}
+#define AMP_TRACE_DEBUG2(m,p1,p2)               {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define AMP_TRACE_DEBUG3(m,p1,p2,p3)            {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define AMP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define AMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define AMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (amp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_AMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the ATT/GATT unit
+*/
+#define GATT_TRACE_ERROR0(m)                     {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m);}
+#define GATT_TRACE_ERROR1(m,p1)                  {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1);}
+#define GATT_TRACE_ERROR2(m,p1,p2)               {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1,p2);}
+#define GATT_TRACE_ERROR3(m,p1,p2,p3)            {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define GATT_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define GATT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define GATT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_ATT, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define GATT_TRACE_WARNING0(m)                   {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m);}
+#define GATT_TRACE_WARNING1(m,p1)                {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1);}
+#define GATT_TRACE_WARNING2(m,p1,p2)             {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1,p2);}
+#define GATT_TRACE_WARNING3(m,p1,p2,p3)          {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define GATT_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define GATT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define GATT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_ATT, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define GATT_TRACE_API0(m)                       {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_ATT, TRACE_TYPE_API, m);}
+#define GATT_TRACE_API1(m,p1)                    {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1);}
+#define GATT_TRACE_API2(m,p1,p2)                 {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1,p2);}
+#define GATT_TRACE_API3(m,p1,p2,p3)              {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1,p2,p3);}
+#define GATT_TRACE_API4(m,p1,p2,p3,p4)           {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define GATT_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define GATT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_ATT, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define GATT_TRACE_EVENT0(m)                     {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m);}
+#define GATT_TRACE_EVENT1(m,p1)                  {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m, p1);}
+#define GATT_TRACE_EVENT2(m,p1,p2)               {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m,p1,p2);}
+#define GATT_TRACE_EVENT3(m,p1,p2,p3)            {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define GATT_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define GATT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define GATT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_ATT, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define GATT_TRACE_DEBUG0(m)                     {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m);}
+#define GATT_TRACE_DEBUG1(m,p1)                  {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1);}
+#define GATT_TRACE_DEBUG2(m,p1,p2)               {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define GATT_TRACE_DEBUG3(m,p1,p2,p3)            {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define GATT_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define GATT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define GATT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (gatt_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_ATT, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* Define tracing for the SMP unit
+*/
+#define SMP_TRACE_ERROR0(m)                     {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_0(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m);}
+#define SMP_TRACE_ERROR1(m,p1)                  {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_1(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1);}
+#define SMP_TRACE_ERROR2(m,p1,p2)               {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_2(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1,p2);}
+#define SMP_TRACE_ERROR3(m,p1,p2,p3)            {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_3(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1,p2,p3);}
+#define SMP_TRACE_ERROR4(m,p1,p2,p3,p4)         {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_4(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4);}
+#define SMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)      {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_5(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5);}
+#define SMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)   {if (smp_cb.trace_level >= BT_TRACE_LEVEL_ERROR) BT_TRACE_6(TRACE_LAYER_SMP, TRACE_TYPE_ERROR, m,p1,p2,p3,p4,p5,p6);}
+
+#define SMP_TRACE_WARNING0(m)                   {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_0(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m);}
+#define SMP_TRACE_WARNING1(m,p1)                {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_1(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1);}
+#define SMP_TRACE_WARNING2(m,p1,p2)             {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_2(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1,p2);}
+#define SMP_TRACE_WARNING3(m,p1,p2,p3)          {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_3(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1,p2,p3);}
+#define SMP_TRACE_WARNING4(m,p1,p2,p3,p4)       {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_4(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4);}
+#define SMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)    {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_5(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5);}
+#define SMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (smp_cb.trace_level >= BT_TRACE_LEVEL_WARNING) BT_TRACE_6(TRACE_LAYER_SMP, TRACE_TYPE_WARNING, m,p1,p2,p3,p4,p5,p6);}
+
+#define SMP_TRACE_API0(m)                       {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_0(TRACE_LAYER_SMP, TRACE_TYPE_API, m);}
+#define SMP_TRACE_API1(m,p1)                    {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_1(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1);}
+#define SMP_TRACE_API2(m,p1,p2)                 {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_2(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1,p2);}
+#define SMP_TRACE_API3(m,p1,p2,p3)              {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_3(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1,p2,p3);}
+#define SMP_TRACE_API4(m,p1,p2,p3,p4)           {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_4(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1,p2,p3,p4);}
+#define SMP_TRACE_API5(m,p1,p2,p3,p4,p5)        {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_5(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5);}
+#define SMP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)     {if (smp_cb.trace_level >= BT_TRACE_LEVEL_API) BT_TRACE_6(TRACE_LAYER_SMP, TRACE_TYPE_API, m,p1,p2,p3,p4,p5,p6);}
+
+#define SMP_TRACE_EVENT0(m)                     {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_0(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m);}
+#define SMP_TRACE_EVENT1(m,p1)                  {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_1(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m, p1);}
+#define SMP_TRACE_EVENT2(m,p1,p2)               {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_2(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m,p1,p2);}
+#define SMP_TRACE_EVENT3(m,p1,p2,p3)            {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_3(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m,p1,p2,p3);}
+#define SMP_TRACE_EVENT4(m,p1,p2,p3,p4)         {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_4(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4);}
+#define SMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)      {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_5(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5);}
+#define SMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)   {if (smp_cb.trace_level >= BT_TRACE_LEVEL_EVENT) BT_TRACE_6(TRACE_LAYER_SMP, TRACE_TYPE_EVENT, m,p1,p2,p3,p4,p5,p6);}
+
+#define SMP_TRACE_DEBUG0(m)                     {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_0(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m);}
+#define SMP_TRACE_DEBUG1(m,p1)                  {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_1(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1);}
+#define SMP_TRACE_DEBUG2(m,p1,p2)               {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_2(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1,p2);}
+#define SMP_TRACE_DEBUG3(m,p1,p2,p3)            {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_3(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1,p2,p3);}
+#define SMP_TRACE_DEBUG4(m,p1,p2,p3,p4)         {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_4(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4);}
+#define SMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)      {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_5(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5);}
+#define SMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)   {if (smp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG) BT_TRACE_6(TRACE_LAYER_SMP, TRACE_TYPE_DEBUG, m,p1,p2,p3,p4,p5,p6);}
+
+/* END OF USE TRACES */
+#else
+
+#define BT_TRACE_0(l,t,m)
+#define BT_TRACE_1(l,t,m,p1)
+#define BT_TRACE_2(l,t,m,p1,p2)
+#define BT_TRACE_3(l,t,m,p1,p2,p3)
+#define BT_TRACE_4(l,t,m,p1,p2,p3,p4)
+#define BT_TRACE_5(l,t,m,p1,p2,p3,p4,p5)
+#define BT_TRACE_6(l,t,m,p1,p2,p3,p4,p5,p6)
+
+#define BT_ERROR_TRACE_0(l,m)
+#define BT_ERROR_TRACE_1(l,m,p1)
+#define BT_ERROR_TRACE_2(l,m,p1,p2)
+#define BT_ERROR_TRACE_3(l,m,p1,p2,p3)
+
+/* Define tracing for the HCI unit
+*/
+#define HCI_TRACE_ERROR0(m)
+#define HCI_TRACE_ERROR1(m,p1)
+#define HCI_TRACE_ERROR2(m,p1,p2)
+#define HCI_TRACE_ERROR3(m,p1,p2,p3)
+#define HCI_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define HCI_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define HCI_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCI_TRACE_WARNING0(m)
+#define HCI_TRACE_WARNING1(m,p1)
+#define HCI_TRACE_WARNING2(m,p1,p2)
+#define HCI_TRACE_WARNING3(m,p1,p2,p3)
+#define HCI_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define HCI_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define HCI_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCI_TRACE_EVENT0(m)
+#define HCI_TRACE_EVENT1(m,p1)
+#define HCI_TRACE_EVENT2(m,p1,p2)
+#define HCI_TRACE_EVENT3(m,p1,p2,p3)
+#define HCI_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define HCI_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define HCI_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCI_TRACE_DEBUG0(m)
+#define HCI_TRACE_DEBUG1(m,p1)
+#define HCI_TRACE_DEBUG2(m,p1,p2)
+#define HCI_TRACE_DEBUG3(m,p1,p2,p3)
+#define HCI_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define HCI_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define HCI_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for BTM
+*/
+#define BTM_TRACE_ERROR0(m)
+#define BTM_TRACE_ERROR1(m,p1)
+#define BTM_TRACE_ERROR2(m,p1,p2)
+#define BTM_TRACE_ERROR3(m,p1,p2,p3)
+#define BTM_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define BTM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define BTM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTM_TRACE_WARNING0(m)
+#define BTM_TRACE_WARNING1(m,p1)
+#define BTM_TRACE_WARNING2(m,p1,p2)
+#define BTM_TRACE_WARNING3(m,p1,p2,p3)
+#define BTM_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define BTM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define BTM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTM_TRACE_API0(m)
+#define BTM_TRACE_API1(m,p1)
+#define BTM_TRACE_API2(m,p1,p2)
+#define BTM_TRACE_API3(m,p1,p2,p3)
+#define BTM_TRACE_API4(m,p1,p2,p3,p4)
+#define BTM_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define BTM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTM_TRACE_EVENT0(m)
+#define BTM_TRACE_EVENT1(m,p1)
+#define BTM_TRACE_EVENT2(m,p1,p2)
+#define BTM_TRACE_EVENT3(m,p1,p2,p3)
+#define BTM_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define BTM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define BTM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTM_TRACE_DEBUG0(m)
+#define BTM_TRACE_DEBUG1(m,p1)
+#define BTM_TRACE_DEBUG2(m,p1,p2)
+#define BTM_TRACE_DEBUG3(m,p1,p2,p3)
+#define BTM_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define BTM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define BTM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for the L2CAP unit
+*/
+#define L2CAP_TRACE_ERROR0(m)
+#define L2CAP_TRACE_ERROR1(m,p1)
+#define L2CAP_TRACE_ERROR2(m,p1,p2)
+#define L2CAP_TRACE_ERROR3(m,p1,p2,p3)
+#define L2CAP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define L2CAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define L2CAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define L2CAP_TRACE_WARNING0(m)
+#define L2CAP_TRACE_WARNING1(m,p1)
+#define L2CAP_TRACE_WARNING2(m,p1,p2)
+#define L2CAP_TRACE_WARNING3(m,p1,p2,p3)
+#define L2CAP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define L2CAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define L2CAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define L2CAP_TRACE_API0(m)
+#define L2CAP_TRACE_API1(m,p1)
+#define L2CAP_TRACE_API2(m,p1,p2)
+#define L2CAP_TRACE_API3(m,p1,p2,p3)
+#define L2CAP_TRACE_API4(m,p1,p2,p3,p4)
+#define L2CAP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define L2CAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define L2CAP_TRACE_EVENT0(m)
+#define L2CAP_TRACE_EVENT1(m,p1)
+#define L2CAP_TRACE_EVENT2(m,p1,p2)
+#define L2CAP_TRACE_EVENT3(m,p1,p2,p3)
+#define L2CAP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define L2CAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define L2CAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define L2CAP_TRACE_DEBUG0(m)
+#define L2CAP_TRACE_DEBUG1(m,p1)
+#define L2CAP_TRACE_DEBUG2(m,p1,p2)
+#define L2CAP_TRACE_DEBUG3(m,p1,p2,p3)
+#define L2CAP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define L2CAP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define L2CAP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the LLCP unit
+*/
+#define LLCP_TRACE_ERROR0(m)
+#define LLCP_TRACE_ERROR1(m,p1)
+#define LLCP_TRACE_ERROR2(m,p1,p2)
+#define LLCP_TRACE_ERROR3(m,p1,p2,p3)
+#define LLCP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define LLCP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define LLCP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define LLCP_TRACE_WARNING0(m)
+#define LLCP_TRACE_WARNING1(m,p1)
+#define LLCP_TRACE_WARNING2(m,p1,p2)
+#define LLCP_TRACE_WARNING3(m,p1,p2,p3)
+#define LLCP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define LLCP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define LLCP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define LLCP_TRACE_API0(m)
+#define LLCP_TRACE_API1(m,p1)
+#define LLCP_TRACE_API2(m,p1,p2)
+#define LLCP_TRACE_API3(m,p1,p2,p3)
+#define LLCP_TRACE_API4(m,p1,p2,p3,p4)
+#define LLCP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define LLCP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define LLCP_TRACE_EVENT0(m)
+#define LLCP_TRACE_EVENT1(m,p1)
+#define LLCP_TRACE_EVENT2(m,p1,p2)
+#define LLCP_TRACE_EVENT3(m,p1,p2,p3)
+#define LLCP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define LLCP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define LLCP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define LLCP_TRACE_DEBUG0(m)
+#define LLCP_TRACE_DEBUG1(m,p1)
+#define LLCP_TRACE_DEBUG2(m,p1,p2)
+#define LLCP_TRACE_DEBUG3(m,p1,p2,p3)
+#define LLCP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define LLCP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define LLCP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the SDP unit
+*/
+#define SDP_TRACE_ERROR0(m)
+#define SDP_TRACE_ERROR1(m,p1)
+#define SDP_TRACE_ERROR2(m,p1,p2)
+#define SDP_TRACE_ERROR3(m,p1,p2,p3)
+#define SDP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define SDP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define SDP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDP_TRACE_WARNING0(m)
+#define SDP_TRACE_WARNING1(m,p1)
+#define SDP_TRACE_WARNING2(m,p1,p2)
+#define SDP_TRACE_WARNING3(m,p1,p2,p3)
+#define SDP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define SDP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define SDP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDP_TRACE_API0(m)
+#define SDP_TRACE_API1(m,p1)
+#define SDP_TRACE_API2(m,p1,p2)
+#define SDP_TRACE_API3(m,p1,p2,p3)
+#define SDP_TRACE_API4(m,p1,p2,p3,p4)
+#define SDP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define SDP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDP_TRACE_EVENT0(m)
+#define SDP_TRACE_EVENT1(m,p1)
+#define SDP_TRACE_EVENT2(m,p1,p2)
+#define SDP_TRACE_EVENT3(m,p1,p2,p3)
+#define SDP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define SDP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define SDP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDP_TRACE_DEBUG0(m)
+#define SDP_TRACE_DEBUG1(m,p1)
+#define SDP_TRACE_DEBUG2(m,p1,p2)
+#define SDP_TRACE_DEBUG3(m,p1,p2,p3)
+#define SDP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define SDP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define SDP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the RFCOMM unit
+*/
+#define RFCOMM_TRACE_ERROR0(m)
+#define RFCOMM_TRACE_ERROR1(m,p1)
+#define RFCOMM_TRACE_ERROR2(m,p1,p2)
+#define RFCOMM_TRACE_ERROR3(m,p1,p2,p3)
+#define RFCOMM_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define RFCOMM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define RFCOMM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define RFCOMM_TRACE_WARNING0(m)
+#define RFCOMM_TRACE_WARNING1(m,p1)
+#define RFCOMM_TRACE_WARNING2(m,p1,p2)
+#define RFCOMM_TRACE_WARNING3(m,p1,p2,p3)
+#define RFCOMM_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define RFCOMM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define RFCOMM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define RFCOMM_TRACE_API0(m)
+#define RFCOMM_TRACE_API1(m,p1)
+#define RFCOMM_TRACE_API2(m,p1,p2)
+#define RFCOMM_TRACE_API3(m,p1,p2,p3)
+#define RFCOMM_TRACE_API4(m,p1,p2,p3,p4)
+#define RFCOMM_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define RFCOMM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define RFCOMM_TRACE_EVENT0(m)
+#define RFCOMM_TRACE_EVENT1(m,p1)
+#define RFCOMM_TRACE_EVENT2(m,p1,p2)
+#define RFCOMM_TRACE_EVENT3(m,p1,p2,p3)
+#define RFCOMM_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define RFCOMM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define RFCOMM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define RFCOMM_TRACE_DEBUG0(m)
+#define RFCOMM_TRACE_DEBUG1(m,p1)
+#define RFCOMM_TRACE_DEBUG2(m,p1,p2)
+#define RFCOMM_TRACE_DEBUG3(m,p1,p2,p3)
+#define RFCOMM_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define RFCOMM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define RFCOMM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for Serial Port Profile
+*/
+#define SPP_TRACE_ERROR0(m)
+#define SPP_TRACE_ERROR1(m,p1)
+#define SPP_TRACE_ERROR2(m,p1,p2)
+#define SPP_TRACE_ERROR3(m,p1,p2,p3)
+#define SPP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define SPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define SPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define SPP_TRACE_WARNING0(m)
+#define SPP_TRACE_WARNING1(m,p1)
+#define SPP_TRACE_WARNING2(m,p1,p2)
+#define SPP_TRACE_WARNING3(m,p1,p2,p3)
+#define SPP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define SPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define SPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define SPP_TRACE_EVENT0(m)
+#define SPP_TRACE_EVENT1(m,p1)
+#define SPP_TRACE_EVENT2(m,p1,p2)
+#define SPP_TRACE_EVENT3(m,p1,p2,p3)
+#define SPP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define SPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define SPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define SPP_TRACE_API0(m)
+#define SPP_TRACE_API1(m,p1)
+#define SPP_TRACE_API2(m,p1,p2)
+#define SPP_TRACE_API3(m,p1,p2,p3)
+#define SPP_TRACE_API4(m,p1,p2,p3,p4)
+#define SPP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define SPP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define SPP_TRACE_DEBUG0(m)
+#define SPP_TRACE_DEBUG1(m,p1)
+#define SPP_TRACE_DEBUG2(m,p1,p2)
+#define SPP_TRACE_DEBUG3(m,p1,p2,p3)
+#define SPP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define SPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define SPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Generic Access Profile traces */
+#define GAP_TRACE_ERROR0(m)
+#define GAP_TRACE_ERROR1(m,p1)
+#define GAP_TRACE_ERROR2(m,p1,p2)
+#define GAP_TRACE_ERROR3(m,p1,p2,p3)
+#define GAP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define GAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define GAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define GAP_TRACE_EVENT0(m)
+#define GAP_TRACE_EVENT1(m,p1)
+#define GAP_TRACE_EVENT2(m,p1,p2)
+#define GAP_TRACE_EVENT3(m,p1,p2,p3)
+#define GAP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define GAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define GAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define GAP_TRACE_API0(m)
+#define GAP_TRACE_API1(m,p1)
+#define GAP_TRACE_API2(m,p1,p2)
+#define GAP_TRACE_API3(m,p1,p2,p3)
+#define GAP_TRACE_API4(m,p1,p2,p3,p4)
+#define GAP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define GAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define GAP_TRACE_WARNING0(m)
+#define GAP_TRACE_WARNING1(m,p1)
+#define GAP_TRACE_WARNING2(m,p1,p2)
+#define GAP_TRACE_WARNING3(m,p1,p2,p3)
+#define GAP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define GAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define GAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for OBX
+*/
+#define OBX_TRACE_ERROR0(m)
+#define OBX_TRACE_ERROR1(m,p1)
+#define OBX_TRACE_ERROR2(m,p1,p2)
+#define OBX_TRACE_ERROR3(m,p1,p2,p3)
+#define OBX_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define OBX_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define OBX_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define OBX_TRACE_WARNING0(m)
+#define OBX_TRACE_WARNING1(m,p1)
+#define OBX_TRACE_WARNING2(m,p1,p2)
+#define OBX_TRACE_WARNING3(m,p1,p2,p3)
+#define OBX_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define OBX_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define OBX_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define OBX_TRACE_EVENT0(m)
+#define OBX_TRACE_EVENT1(m,p1)
+#define OBX_TRACE_EVENT2(m,p1,p2)
+#define OBX_TRACE_EVENT3(m,p1,p2,p3)
+#define OBX_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define OBX_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define OBX_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define OBX_TRACE_DEBUG0(m)
+#define OBX_TRACE_DEBUG1(m,p1)
+#define OBX_TRACE_DEBUG2(m,p1,p2)
+#define OBX_TRACE_DEBUG3(m,p1,p2,p3)
+#define OBX_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define OBX_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define OBX_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define OBX_TRACE_API0(m)
+#define OBX_TRACE_API1(m,p1)
+#define OBX_TRACE_API2(m,p1,p2)
+#define OBX_TRACE_API3(m,p1,p2,p3)
+#define OBX_TRACE_API4(m,p1,p2,p3,p4)
+#define OBX_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define OBX_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for GOEP application profiles
+*/
+#define GOEP_TRACE_ERROR0(m)
+#define GOEP_TRACE_ERROR1(m,p1)
+#define GOEP_TRACE_ERROR2(m,p1,p2)
+#define GOEP_TRACE_ERROR3(m,p1,p2,p3)
+#define GOEP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define GOEP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define GOEP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define GOEP_TRACE_WARNING0(m)
+#define GOEP_TRACE_WARNING1(m,p1)
+#define GOEP_TRACE_WARNING2(m,p1,p2)
+#define GOEP_TRACE_WARNING3(m,p1,p2,p3)
+#define GOEP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define GOEP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define GOEP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define GOEP_TRACE_EVENT0(m)
+#define GOEP_TRACE_EVENT1(m,p1)
+#define GOEP_TRACE_EVENT2(m,p1,p2)
+#define GOEP_TRACE_EVENT3(m,p1,p2,p3)
+#define GOEP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define GOEP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define GOEP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define GOEP_TRACE_DEBUG0(m)
+#define GOEP_TRACE_DEBUG1(m,p1)
+#define GOEP_TRACE_DEBUG2(m,p1,p2)
+#define GOEP_TRACE_DEBUG3(m,p1,p2,p3)
+#define GOEP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define GOEP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define GOEP_TRACE_API0(m)
+#define GOEP_TRACE_API1(m,p1)
+#define GOEP_TRACE_API2(m,p1,p2)
+#define GOEP_TRACE_API3(m,p1,p2,p3)
+#define GOEP_TRACE_API4(m,p1,p2,p3,p4)
+#define GOEP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define GOEP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the BPP profile
+*/
+#define BPP_TRACE_ERROR0(m)
+#define BPP_TRACE_ERROR1(m,p1)
+#define BPP_TRACE_ERROR2(m,p1,p2)
+#define BPP_TRACE_ERROR3(m,p1,p2,p3)
+#define BPP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define BPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define BPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define BPP_TRACE_WARNING0(m)
+#define BPP_TRACE_WARNING1(m,p1)
+#define BPP_TRACE_WARNING2(m,p1,p2)
+#define BPP_TRACE_WARNING3(m,p1,p2,p3)
+#define BPP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define BPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define BPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define BPP_TRACE_EVENT0(m)
+#define BPP_TRACE_EVENT1(m,p1)
+#define BPP_TRACE_EVENT2(m,p1,p2)
+#define BPP_TRACE_EVENT3(m,p1,p2,p3)
+#define BPP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define BPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define BPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define BPP_TRACE_DEBUG0(m)
+#define BPP_TRACE_DEBUG1(m,p1)
+#define BPP_TRACE_DEBUG2(m,p1,p2)
+#define BPP_TRACE_DEBUG3(m,p1,p2,p3)
+#define BPP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define BPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define BPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define BPP_TRACE_API0(m)
+#define BPP_TRACE_API1(m,p1)
+#define BPP_TRACE_API2(m,p1,p2)
+#define BPP_TRACE_API3(m,p1,p2,p3)
+#define BPP_TRACE_API4(m,p1,p2,p3,p4)
+#define BPP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define BPP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the BIP profile
+*/
+#define BIP_TRACE_ERROR0(m)
+#define BIP_TRACE_ERROR1(m,p1)
+#define BIP_TRACE_ERROR2(m,p1,p2)
+#define BIP_TRACE_ERROR3(m,p1,p2,p3)
+#define BIP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define BIP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define BIP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define BIP_TRACE_WARNING0(m)
+#define BIP_TRACE_WARNING1(m,p1)
+#define BIP_TRACE_WARNING2(m,p1,p2)
+#define BIP_TRACE_WARNING3(m,p1,p2,p3)
+#define BIP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define BIP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define BIP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define BIP_TRACE_EVENT0(m)
+#define BIP_TRACE_EVENT1(m,p1)
+#define BIP_TRACE_EVENT2(m,p1,p2)
+#define BIP_TRACE_EVENT3(m,p1,p2,p3)
+#define BIP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define BIP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define BIP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define BIP_TRACE_DEBUG0(m)
+#define BIP_TRACE_DEBUG1(m,p1)
+#define BIP_TRACE_DEBUG2(m,p1,p2)
+#define BIP_TRACE_DEBUG3(m,p1,p2,p3)
+#define BIP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define BIP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define BIP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define BIP_TRACE_API0(m)
+#define BIP_TRACE_API1(m,p1)
+#define BIP_TRACE_API2(m,p1,p2)
+#define BIP_TRACE_API3(m,p1,p2,p3)
+#define BIP_TRACE_API4(m,p1,p2,p3,p4)
+#define BIP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define BIP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for TCS
+*/
+#define TCS_TRACE_ERROR0(m)
+#define TCS_TRACE_ERROR1(m,p1)
+#define TCS_TRACE_ERROR2(m,p1,p2)
+#define TCS_TRACE_ERROR3(m,p1,p2,p3)
+#define TCS_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define TCS_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define TCS_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define TCS_TRACE_WARNING0(m)
+#define TCS_TRACE_WARNING1(m,p1)
+#define TCS_TRACE_WARNING2(m,p1,p2)
+#define TCS_TRACE_WARNING3(m,p1,p2,p3)
+#define TCS_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define TCS_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define TCS_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define TCS_TRACE_EVENT0(m)
+#define TCS_TRACE_EVENT1(m,p1)
+#define TCS_TRACE_EVENT2(m,p1,p2)
+#define TCS_TRACE_EVENT3(m,p1,p2,p3)
+#define TCS_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define TCS_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define TCS_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define TCS_TRACE_DEBUG0(m)
+#define TCS_TRACE_DEBUG1(m,p1)
+#define TCS_TRACE_DEBUG2(m,p1,p2)
+#define TCS_TRACE_DEBUG3(m,p1,p2,p3)
+#define TCS_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define TCS_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define TCS_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define TCS_TRACE_API0(m)
+#define TCS_TRACE_API1(m,p1)
+#define TCS_TRACE_API2(m,p1,p2)
+#define TCS_TRACE_API3(m,p1,p2,p3)
+#define TCS_TRACE_API4(m,p1,p2,p3,p4)
+#define TCS_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define TCS_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for ICP
+*/
+#define ICP_TRACE_ERROR0(m)
+#define ICP_TRACE_ERROR1(m,p1)
+#define ICP_TRACE_ERROR2(m,p1,p2)
+#define ICP_TRACE_ERROR3(m,p1,p2,p3)
+#define ICP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define ICP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define ICP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define ICP_TRACE_WARNING0(m)
+#define ICP_TRACE_WARNING1(m,p1)
+#define ICP_TRACE_WARNING2(m,p1,p2)
+#define ICP_TRACE_WARNING3(m,p1,p2,p3)
+#define ICP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define ICP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define ICP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define ICP_TRACE_EVENT0(m)
+#define ICP_TRACE_EVENT1(m,p1)
+#define ICP_TRACE_EVENT2(m,p1,p2)
+#define ICP_TRACE_EVENT3(m,p1,p2,p3)
+#define ICP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define ICP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define ICP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define ICP_TRACE_DEBUG0(m)
+#define ICP_TRACE_DEBUG1(m,p1)
+#define ICP_TRACE_DEBUG2(m,p1,p2)
+#define ICP_TRACE_DEBUG3(m,p1,p2,p3)
+#define ICP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define ICP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define ICP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define ICP_TRACE_API0(m)
+#define ICP_TRACE_API1(m,p1)
+#define ICP_TRACE_API2(m,p1,p2)
+#define ICP_TRACE_API3(m,p1,p2,p3)
+#define ICP_TRACE_API4(m,p1,p2,p3,p4)
+#define ICP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define ICP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for CTP
+*/
+#define CTP_TRACE_ERROR0(m)
+#define CTP_TRACE_ERROR1(m,p1)
+#define CTP_TRACE_ERROR2(m,p1,p2)
+#define CTP_TRACE_ERROR3(m,p1,p2,p3)
+#define CTP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define CTP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define CTP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define CTP_TRACE_WARNING0(m)
+#define CTP_TRACE_WARNING1(m,p1)
+#define CTP_TRACE_WARNING2(m,p1,p2)
+#define CTP_TRACE_WARNING3(m,p1,p2,p3)
+#define CTP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define CTP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define CTP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define CTP_TRACE_EVENT0(m)
+#define CTP_TRACE_EVENT1(m,p1)
+#define CTP_TRACE_EVENT2(m,p1,p2)
+#define CTP_TRACE_EVENT3(m,p1,p2,p3)
+#define CTP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define CTP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define CTP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define CTP_TRACE_DEBUG0(m)
+#define CTP_TRACE_DEBUG1(m,p1)
+#define CTP_TRACE_DEBUG2(m,p1,p2)
+#define CTP_TRACE_DEBUG3(m,p1,p2,p3)
+#define CTP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define CTP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define CTP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define CTP_TRACE_API0(m)
+#define CTP_TRACE_API1(m,p1)
+#define CTP_TRACE_API2(m,p1,p2)
+#define CTP_TRACE_API3(m,p1,p2,p3)
+#define CTP_TRACE_API4(m,p1,p2,p3,p4)
+#define CTP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define CTP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for headset profile */
+
+#define HSP2_TRACE_ERROR0(pcb,m)
+#define HSP2_TRACE_ERROR1(pcb,m,p1)
+#define HSP2_TRACE_ERROR2(pcb,m,p1,p2)
+#define HSP2_TRACE_ERROR3(pcb,m,p1,p2,p3)
+#define HSP2_TRACE_ERROR4(pcb,m,p1,p2,p3,p4)
+#define HSP2_TRACE_ERROR5(pcb,m,p1,p2,p3,p4,p5)
+#define HSP2_TRACE_ERROR6(pcb,m,p1,p2,p3,p4,p5,p6)
+
+#define HSP2_TRACE_WARNING0(pcb,m)
+#define HSP2_TRACE_WARNING1(pcb,m,p1)
+#define HSP2_TRACE_WARNING2(pcb,m,p1,p2)
+#define HSP2_TRACE_WARNING3(pcb,m,p1,p2,p3)
+#define HSP2_TRACE_WARNING4(pcb,m,p1,p2,p3,p4)
+#define HSP2_TRACE_WARNING5(pcb,m,p1,p2,p3,p4,p5)
+#define HSP2_TRACE_WARNING6(pcb,m,p1,p2,p3,p4,p5,p6)
+
+#define HSP2_TRACE_API0(pcb,m)
+#define HSP2_TRACE_API1(pcb,m,p1)
+#define HSP2_TRACE_API2(pcb,m,p1,p2)
+#define HSP2_TRACE_API3(pcb,m,p1,p2,p3)
+#define HSP2_TRACE_API4(pcb,m,p1,p2,p3,p4)
+#define HSP2_TRACE_API5(pcb,m,p1,p2,p3,p4,p5)
+#define HSP2_TRACE_API6(pcb,m,p1,p2,p3,p4,p5,p6)
+
+#define HSP2_TRACE_EVENT0(pcb,m)
+#define HSP2_TRACE_EVENT1(pcb,m,p1)
+#define HSP2_TRACE_EVENT2(pcb,m,p1,p2)
+#define HSP2_TRACE_EVENT3(pcb,m,p1,p2,p3)
+#define HSP2_TRACE_EVENT4(pcb,m,p1,p2,p3,p4)
+#define HSP2_TRACE_EVENT5(pcb,m,p1,p2,p3,p4,p5)
+#define HSP2_TRACE_EVENT6(pcb,m,p1,p2,p3,p4,p5,p6)
+
+#define HSP2_TRACE_DEBUG0(pcb,m)
+#define HSP2_TRACE_DEBUG1(pcb,m,p1)
+#define HSP2_TRACE_DEBUG2(pcb,m,p1,p2)
+#define HSP2_TRACE_DEBUG3(pcb,m,p1,p2,p3)
+#define HSP2_TRACE_DEBUG4(pcb,m,p1,p2,p3,p4)
+#define HSP2_TRACE_DEBUG5(pcb,m,p1,p2,p3,p4,p5)
+#define HSP2_TRACE_DEBUG6(pcb,m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the NFC unit
+*/
+#define NFC_TRACE_ERROR0(m)
+#define NFC_TRACE_ERROR1(m,p1)
+#define NFC_TRACE_ERROR2(m,p1,p2)
+#define NFC_TRACE_ERROR3(m,p1,p2,p3)
+#define NFC_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define NFC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define NFC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFC_TRACE_WARNING0(m)
+#define NFC_TRACE_WARNING1(m,p1)
+#define NFC_TRACE_WARNING2(m,p1,p2)
+#define NFC_TRACE_WARNING3(m,p1,p2,p3)
+#define NFC_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define NFC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define NFC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFC_TRACE_API0(m)
+#define NFC_TRACE_API1(m,p1)
+#define NFC_TRACE_API2(m,p1,p2)
+#define NFC_TRACE_API3(m,p1,p2,p3)
+#define NFC_TRACE_API4(m,p1,p2,p3,p4)
+#define NFC_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define NFC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFC_TRACE_EVENT0(m)
+#define NFC_TRACE_EVENT1(m,p1)
+#define NFC_TRACE_EVENT2(m,p1,p2)
+#define NFC_TRACE_EVENT3(m,p1,p2,p3)
+#define NFC_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define NFC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define NFC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFC_TRACE_DEBUG0(m)
+#define NFC_TRACE_DEBUG1(m,p1)
+#define NFC_TRACE_DEBUG2(m,p1,p2)
+#define NFC_TRACE_DEBUG3(m,p1,p2,p3)
+#define NFC_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define NFC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define NFC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define NCI_TRACE_ERROR0(m)
+#define NCI_TRACE_ERROR1(m,p1)
+#define NCI_TRACE_ERROR2(m,p1,p2)
+#define NCI_TRACE_ERROR3(m,p1,p2,p3)
+#define NCI_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define NCI_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define NCI_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define NCI_TRACE_WARNING0(m)
+#define NCI_TRACE_WARNING1(m,p1)
+#define NCI_TRACE_WARNING2(m,p1,p2)
+#define NCI_TRACE_WARNING3(m,p1,p2,p3)
+#define NCI_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define NCI_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define NCI_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define NCI_TRACE_API0(m)
+#define NCI_TRACE_API1(m,p1)
+#define NCI_TRACE_API2(m,p1,p2)
+#define NCI_TRACE_API3(m,p1,p2,p3)
+#define NCI_TRACE_API4(m,p1,p2,p3,p4)
+#define NCI_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define NCI_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define NCI_TRACE_EVENT0(m)
+#define NCI_TRACE_EVENT1(m,p1)
+#define NCI_TRACE_EVENT2(m,p1,p2)
+#define NCI_TRACE_EVENT3(m,p1,p2,p3)
+#define NCI_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define NCI_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define NCI_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define NCI_TRACE_DEBUG0(m)
+#define NCI_TRACE_DEBUG1(m,p1)
+#define NCI_TRACE_DEBUG2(m,p1,p2)
+#define NCI_TRACE_DEBUG3(m,p1,p2,p3)
+#define NCI_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define NCI_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define NCI_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define RW_TRACE_ERROR0(m)
+#define RW_TRACE_ERROR1(m,p1)
+#define RW_TRACE_ERROR2(m,p1,p2)
+#define RW_TRACE_ERROR3(m,p1,p2,p3)
+#define RW_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define RW_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define RW_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define RW_TRACE_WARNING0(m)
+#define RW_TRACE_WARNING1(m,p1)
+#define RW_TRACE_WARNING2(m,p1,p2)
+#define RW_TRACE_WARNING3(m,p1,p2,p3)
+#define RW_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define RW_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define RW_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) }
+
+#define RW_TRACE_API0(m)
+#define RW_TRACE_API1(m,p1)
+#define RW_TRACE_API2(m,p1,p2)
+#define RW_TRACE_API3(m,p1,p2,p3)
+#define RW_TRACE_API4(m,p1,p2,p3,p4)
+#define RW_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define RW_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define RW_TRACE_EVENT0(m)
+#define RW_TRACE_EVENT1(m,p1)
+#define RW_TRACE_EVENT2(m,p1,p2)
+#define RW_TRACE_EVENT3(m,p1,p2,p3)
+#define RW_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define RW_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define RW_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define RW_TRACE_DEBUG0(m)
+#define RW_TRACE_DEBUG1(m,p1)
+#define RW_TRACE_DEBUG2(m,p1,p2)
+#define RW_TRACE_DEBUG3(m,p1,p2,p3)
+#define RW_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define RW_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define RW_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define CE_TRACE_ERROR0(m)
+#define CE_TRACE_ERROR1(m,p1)
+#define CE_TRACE_ERROR2(m,p1,p2)
+#define CE_TRACE_ERROR3(m,p1,p2,p3)
+#define CE_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define CE_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define CE_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define CE_TRACE_WARNING0(m)
+#define CE_TRACE_WARNING1(m,p1)
+#define CE_TRACE_WARNING2(m,p1,p2)
+#define CE_TRACE_WARNING3(m,p1,p2,p3)
+#define CE_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define CE_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define CE_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define CE_TRACE_API0(m)
+#define CE_TRACE_API1(m,p1)
+#define CE_TRACE_API2(m,p1,p2)
+#define CE_TRACE_API3(m,p1,p2,p3)
+#define CE_TRACE_API4(m,p1,p2,p3,p4)
+#define CE_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define CE_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define CE_TRACE_EVENT0(m)
+#define CE_TRACE_EVENT1(m,p1)
+#define CE_TRACE_EVENT2(m,p1,p2)
+#define CE_TRACE_EVENT3(m,p1,p2,p3)
+#define CE_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define CE_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define CE_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define CE_TRACE_DEBUG0(m)
+#define CE_TRACE_DEBUG1(m,p1)
+#define CE_TRACE_DEBUG2(m,p1,p2)
+#define CE_TRACE_DEBUG3(m,p1,p2,p3)
+#define CE_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define CE_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define CE_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define NDEF_TRACE_ERROR0(m)
+#define NDEF_TRACE_ERROR1(m,p1)
+#define NDEF_TRACE_ERROR2(m,p1,p2)
+#define NDEF_TRACE_ERROR3(m,p1,p2,p3)
+#define NDEF_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define NDEF_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define NDEF_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define NDEF_TRACE_WARNING0(m)
+#define NDEF_TRACE_WARNING1(m,p1)
+#define NDEF_TRACE_WARNING2(m,p1,p2)
+#define NDEF_TRACE_WARNING3(m,p1,p2,p3)
+#define NDEF_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define NDEF_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define NDEF_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define NDEF_TRACE_API0(m)
+#define NDEF_TRACE_API1(m,p1)
+#define NDEF_TRACE_API2(m,p1,p2)
+#define NDEF_TRACE_API3(m,p1,p2,p3)
+#define NDEF_TRACE_API4(m,p1,p2,p3,p4)
+#define NDEF_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define NDEF_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define NDEF_TRACE_EVENT0(m)
+#define NDEF_TRACE_EVENT1(m,p1)
+#define NDEF_TRACE_EVENT2(m,p1,p2)
+#define NDEF_TRACE_EVENT3(m,p1,p2,p3)
+#define NDEF_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define NDEF_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define NDEF_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define NDEF_TRACE_DEBUG0(m)
+#define NDEF_TRACE_DEBUG1(m,p1)
+#define NDEF_TRACE_DEBUG2(m,p1,p2)
+#define NDEF_TRACE_DEBUG3(m,p1,p2,p3)
+#define NDEF_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define NDEF_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define NDEF_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the NFA unit
+*/
+#define NFA_TRACE_ERROR0(m)
+#define NFA_TRACE_ERROR1(m,p1)
+#define NFA_TRACE_ERROR2(m,p1,p2)
+#define NFA_TRACE_ERROR3(m,p1,p2,p3)
+#define NFA_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define NFA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define NFA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFA_TRACE_WARNING0(m)
+#define NFA_TRACE_WARNING1(m,p1)
+#define NFA_TRACE_WARNING2(m,p1,p2)
+#define NFA_TRACE_WARNING3(m,p1,p2,p3)
+#define NFA_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define NFA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define NFA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFA_TRACE_API0(m)
+#define NFA_TRACE_API1(m,p1)
+#define NFA_TRACE_API2(m,p1,p2)
+#define NFA_TRACE_API3(m,p1,p2,p3)
+#define NFA_TRACE_API4(m,p1,p2,p3,p4)
+#define NFA_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define NFA_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFA_TRACE_EVENT0(m)
+#define NFA_TRACE_EVENT1(m,p1)
+#define NFA_TRACE_EVENT2(m,p1,p2)
+#define NFA_TRACE_EVENT3(m,p1,p2,p3)
+#define NFA_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define NFA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define NFA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define NFA_TRACE_DEBUG0(m)
+#define NFA_TRACE_DEBUG1(m,p1)
+#define NFA_TRACE_DEBUG2(m,p1,p2)
+#define NFA_TRACE_DEBUG3(m,p1,p2,p3)
+#define NFA_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define NFA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define NFA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* define traces for HID Host */
+#define HIDH_TRACE_ERROR0(m)
+#define HIDH_TRACE_ERROR1(m,p1)
+#define HIDH_TRACE_ERROR2(m,p1,p2)
+#define HIDH_TRACE_ERROR3(m,p1,p2,p3)
+#define HIDH_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define HIDH_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define HIDH_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDH_TRACE_WARNING0(m)
+#define HIDH_TRACE_WARNING1(m,p1)
+#define HIDH_TRACE_WARNING2(m,p1,p2)
+#define HIDH_TRACE_WARNING3(m,p1,p2,p3)
+#define HIDH_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define HIDH_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define HIDH_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDH_TRACE_API0(m)
+#define HIDH_TRACE_API1(m,p1)
+#define HIDH_TRACE_API2(m,p1,p2)
+#define HIDH_TRACE_API3(m,p1,p2,p3)
+#define HIDH_TRACE_API4(m,p1,p2,p3,p4)
+#define HIDH_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define HIDH_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDH_TRACE_EVENT0(m)
+#define HIDH_TRACE_EVENT1(m,p1)
+#define HIDH_TRACE_EVENT2(m,p1,p2)
+#define HIDH_TRACE_EVENT3(m,p1,p2,p3)
+#define HIDH_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define HIDH_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define HIDH_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDH_TRACE_DEBUG0(m)
+#define HIDH_TRACE_DEBUG1(m,p1)
+#define HIDH_TRACE_DEBUG2(m,p1,p2)
+#define HIDH_TRACE_DEBUG3(m,p1,p2,p3)
+#define HIDH_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define HIDH_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define HIDH_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for HID Device */
+#define HIDD_TRACE_ERROR0(m)
+#define HIDD_TRACE_ERROR1(m,p1)
+#define HIDD_TRACE_ERROR2(m,p1,p2)
+#define HIDD_TRACE_ERROR3(m,p1,p2,p3)
+#define HIDD_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define HIDD_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define HIDD_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDD_TRACE_WARNING0(m)
+#define HIDD_TRACE_WARNING1(m,p1)
+#define HIDD_TRACE_WARNING2(m,p1,p2)
+#define HIDD_TRACE_WARNING3(m,p1,p2,p3)
+#define HIDD_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define HIDD_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define HIDD_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDD_TRACE_API0(m)
+#define HIDD_TRACE_API1(m,p1)
+#define HIDD_TRACE_API2(m,p1,p2)
+#define HIDD_TRACE_API3(m,p1,p2,p3)
+#define HIDD_TRACE_API4(m,p1,p2,p3,p4)
+#define HIDD_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define HIDD_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDD_TRACE_EVENT0(m)
+#define HIDD_TRACE_EVENT1(m,p1)
+#define HIDD_TRACE_EVENT2(m,p1,p2)
+#define HIDD_TRACE_EVENT3(m,p1,p2,p3)
+#define HIDD_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define HIDD_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define HIDD_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define HIDD_TRACE_DEBUG0(m)
+#define HIDD_TRACE_DEBUG1(m,p1)
+#define HIDD_TRACE_DEBUG2(m,p1,p2)
+#define HIDD_TRACE_DEBUG3(m,p1,p2,p3)
+#define HIDD_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define HIDD_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define HIDD_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for DUN */
+
+#define DUN_TRACE_ERROR0(m)
+#define DUN_TRACE_ERROR1(m,p1)
+#define DUN_TRACE_ERROR2(m,p1,p2)
+#define DUN_TRACE_ERROR3(m,p1,p2,p3)
+#define DUN_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define DUN_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define DUN_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define DUN_TRACE_WARNING0(m)
+#define DUN_TRACE_WARNING1(m,p1)
+#define DUN_TRACE_WARNING2(m,p1,p2)
+#define DUN_TRACE_WARNING3(m,p1,p2,p3)
+#define DUN_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define DUN_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define DUN_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define DUN_TRACE_API0(m)
+#define DUN_TRACE_API1(m,p1)
+#define DUN_TRACE_API2(m,p1,p2)
+#define DUN_TRACE_API3(m,p1,p2,p3)
+#define DUN_TRACE_API4(m,p1,p2,p3,p4)
+#define DUN_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define DUN_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define DUN_TRACE_EVENT0(m)
+#define DUN_TRACE_EVENT1(m,p1)
+#define DUN_TRACE_EVENT2(m,p1,p2)
+#define DUN_TRACE_EVENT3(m,p1,p2,p3)
+#define DUN_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define DUN_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define DUN_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define DUN_TRACE_DEBUG0(m)
+#define DUN_TRACE_DEBUG1(m,p1)
+#define DUN_TRACE_DEBUG2(m,p1,p2)
+#define DUN_TRACE_DEBUG3(m,p1,p2,p3)
+#define DUN_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define DUN_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define DUN_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for HCRP */
+
+#define HCRP_TRACE_ERROR0(m)
+#define HCRP_TRACE_ERROR1(m,p1)
+#define HCRP_TRACE_ERROR2(m,p1,p2)
+#define HCRP_TRACE_ERROR3(m,p1,p2,p3)
+#define HCRP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define HCRP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define HCRP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRP_TRACE_WARNING0(m)
+#define HCRP_TRACE_WARNING1(m,p1)
+#define HCRP_TRACE_WARNING2(m,p1,p2)
+#define HCRP_TRACE_WARNING3(m,p1,p2,p3)
+#define HCRP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define HCRP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define HCRP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRP_TRACE_API0(m)
+#define HCRP_TRACE_API1(m,p1)
+#define HCRP_TRACE_API2(m,p1,p2)
+#define HCRP_TRACE_API3(m,p1,p2,p3)
+#define HCRP_TRACE_API4(m,p1,p2,p3,p4)
+#define HCRP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define HCRP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRP_TRACE_EVENT0(m)
+#define HCRP_TRACE_EVENT1(m,p1)
+#define HCRP_TRACE_EVENT2(m,p1,p2)
+#define HCRP_TRACE_EVENT3(m,p1,p2,p3)
+#define HCRP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define HCRP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define HCRP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRP_TRACE_DEBUG0(m)
+#define HCRP_TRACE_DEBUG1(m,p1)
+#define HCRP_TRACE_DEBUG2(m,p1,p2)
+#define HCRP_TRACE_DEBUG3(m,p1,p2,p3)
+#define HCRP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define HCRP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define HCRP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* define traces for HCRP */
+
+#define HCRPM_TRACE_ERROR0(m)
+#define HCRPM_TRACE_ERROR1(m,p1)
+#define HCRPM_TRACE_ERROR2(m,p1,p2)
+#define HCRPM_TRACE_ERROR3(m,p1,p2,p3)
+#define HCRPM_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define HCRPM_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define HCRPM_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRPM_TRACE_WARNING0(m)
+#define HCRPM_TRACE_WARNING1(m,p1)
+#define HCRPM_TRACE_WARNING2(m,p1,p2)
+#define HCRPM_TRACE_WARNING3(m,p1,p2,p3)
+#define HCRPM_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define HCRPM_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define HCRPM_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRPM_TRACE_API0(m)
+#define HCRPM_TRACE_API1(m,p1)
+#define HCRPM_TRACE_API2(m,p1,p2)
+#define HCRPM_TRACE_API3(m,p1,p2,p3)
+#define HCRPM_TRACE_API4(m,p1,p2,p3,p4)
+#define HCRPM_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define HCRPM_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRPM_TRACE_EVENT0(m)
+#define HCRPM_TRACE_EVENT1(m,p1)
+#define HCRPM_TRACE_EVENT2(m,p1,p2)
+#define HCRPM_TRACE_EVENT3(m,p1,p2,p3)
+#define HCRPM_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define HCRPM_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define HCRPM_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define HCRPM_TRACE_DEBUG0(m)
+#define HCRPM_TRACE_DEBUG1(m,p1)
+#define HCRPM_TRACE_DEBUG2(m,p1,p2)
+#define HCRPM_TRACE_DEBUG3(m,p1,p2,p3)
+#define HCRPM_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define HCRPM_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define HCRPM_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for RPC */
+
+#define RPC_TRACE_ERROR0(m)
+#define RPC_TRACE_ERROR1(m,p1)
+#define RPC_TRACE_ERROR2(m,p1,p2)
+#define RPC_TRACE_ERROR3(m,p1,p2,p3)
+#define RPC_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define RPC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define RPC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define RPC_TRACE_WARNING0(m)
+#define RPC_TRACE_WARNING1(m,p1)
+#define RPC_TRACE_WARNING2(m,p1,p2)
+#define RPC_TRACE_WARNING3(m,p1,p2,p3)
+#define RPC_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define RPC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define RPC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define RPC_TRACE_API0(m)
+#define RPC_TRACE_API1(m,p1)
+#define RPC_TRACE_API2(m,p1,p2)
+#define RPC_TRACE_API3(m,p1,p2,p3)
+#define RPC_TRACE_API4(m,p1,p2,p3,p4)
+#define RPC_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define RPC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define RPC_TRACE_EVENT0(m)
+#define RPC_TRACE_EVENT1(m,p1)
+#define RPC_TRACE_EVENT2(m,p1,p2)
+#define RPC_TRACE_EVENT3(m,p1,p2,p3)
+#define RPC_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define RPC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define RPC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define RPC_TRACE_DEBUG0(m)
+#define RPC_TRACE_DEBUG1(m,p1)
+#define RPC_TRACE_DEBUG2(m,p1,p2)
+#define RPC_TRACE_DEBUG3(m,p1,p2,p3)
+#define RPC_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define RPC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define RPC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for BNEP */
+
+#define BNEP_TRACE_ERROR0(m)
+#define BNEP_TRACE_ERROR1(m,p1)
+#define BNEP_TRACE_ERROR2(m,p1,p2)
+#define BNEP_TRACE_ERROR3(m,p1,p2,p3)
+#define BNEP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define BNEP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define BNEP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define BNEP_TRACE_WARNING0(m)
+#define BNEP_TRACE_WARNING1(m,p1)
+#define BNEP_TRACE_WARNING2(m,p1,p2)
+#define BNEP_TRACE_WARNING3(m,p1,p2,p3)
+#define BNEP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define BNEP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define BNEP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define BNEP_TRACE_API0(m)
+#define BNEP_TRACE_API1(m,p1)
+#define BNEP_TRACE_API2(m,p1,p2)
+#define BNEP_TRACE_API3(m,p1,p2,p3)
+#define BNEP_TRACE_API4(m,p1,p2,p3,p4)
+#define BNEP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define BNEP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define BNEP_TRACE_EVENT0(m)
+#define BNEP_TRACE_EVENT1(m,p1)
+#define BNEP_TRACE_EVENT2(m,p1,p2)
+#define BNEP_TRACE_EVENT3(m,p1,p2,p3)
+#define BNEP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define BNEP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define BNEP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define BNEP_TRACE_DEBUG0(m)
+#define BNEP_TRACE_DEBUG1(m,p1)
+#define BNEP_TRACE_DEBUG2(m,p1,p2)
+#define BNEP_TRACE_DEBUG3(m,p1,p2,p3)
+#define BNEP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define BNEP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define BNEP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* hid module traces */
+
+#define MSKB_TRACE_0(m)
+#define MSKB_TRACE_1(m,p1)
+#define MSKB_TRACE_2(m,p1,p2)
+#define MSKB_TRACE_3(m,p1,p2,p3)
+#define MSKB_TRACE_4(m,p1,p2,p3,p4)
+#define MSKB_TRACE_5(m,p1,p2,p3,p4,p5)
+#define MSKB_TRACE_6(m,p1,p2,p3,p4,p5,p6)
+
+#define MSKB_DEBUG_0(m)
+#define MSKB_DEBUG_1(m,p1)
+#define MSKB_DEBUG_2(m,p1,p2)
+#define MSKB_DEBUG_3(m,p1,p2,p3)
+#define MSKB_DEBUG_4(m,p1,p2,p3,p4)
+#define MSKB_DEBUG_5(m,p1,p2,p3,p4,p5)
+#define MSKB_DEBUG_6(m,p1,p2,p3,p4,p5,p6)
+
+#define MSKB_ERROR_0(m)
+#define MSKB_ERROR_1(m,p1)
+#define MSKB_ERROR_2(m,p1,p2)
+#define MSKB_ERROR_3(m,p1,p2,p3)
+#define MSKB_ERROR_4(m,p1,p2,p3,p4)
+#define MSKB_ERROR_5(m,p1,p2,p3,p4,p5)
+#define MSKB_ERROR_6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for PAN */
+
+#define PAN_TRACE_ERROR0(m)
+#define PAN_TRACE_ERROR1(m,p1)
+#define PAN_TRACE_ERROR2(m,p1,p2)
+#define PAN_TRACE_ERROR3(m,p1,p2,p3)
+#define PAN_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define PAN_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define PAN_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define PAN_TRACE_WARNING0(m)
+#define PAN_TRACE_WARNING1(m,p1)
+#define PAN_TRACE_WARNING2(m,p1,p2)
+#define PAN_TRACE_WARNING3(m,p1,p2,p3)
+#define PAN_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define PAN_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define PAN_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define PAN_TRACE_API0(m)
+#define PAN_TRACE_API1(m,p1)
+#define PAN_TRACE_API2(m,p1,p2)
+#define PAN_TRACE_API3(m,p1,p2,p3)
+#define PAN_TRACE_API4(m,p1,p2,p3,p4)
+#define PAN_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define PAN_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define PAN_TRACE_EVENT0(m)
+#define PAN_TRACE_EVENT1(m,p1)
+#define PAN_TRACE_EVENT2(m,p1,p2)
+#define PAN_TRACE_EVENT3(m,p1,p2,p3)
+#define PAN_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define PAN_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define PAN_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define PAN_TRACE_DEBUG0(m)
+#define PAN_TRACE_DEBUG1(m,p1)
+#define PAN_TRACE_DEBUG2(m,p1,p2)
+#define PAN_TRACE_DEBUG3(m,p1,p2,p3)
+#define PAN_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define PAN_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define PAN_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* define traces for SIM */
+
+#define SAP_TRACE_ERROR0(m)
+#define SAP_TRACE_ERROR1(m,p1)
+#define SAP_TRACE_ERROR2(m,p1,p2)
+#define SAP_TRACE_ERROR3(m,p1,p2,p3)
+#define SAP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define SAP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define SAP_TRACE_WARNING0(m)
+#define SAP_TRACE_WARNING1(m,p1)
+#define SAP_TRACE_WARNING2(m,p1,p2)
+#define SAP_TRACE_WARNING3(m,p1,p2,p3)
+#define SAP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define SAP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define SAP_TRACE_API0(m)
+#define SAP_TRACE_API1(m,p1)
+#define SAP_TRACE_API2(m,p1,p2)
+#define SAP_TRACE_API3(m,p1,p2,p3)
+#define SAP_TRACE_API4(m,p1,p2,p3,p4)
+#define SAP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define SAP_TRACE_EVENT0(m)
+#define SAP_TRACE_EVENT1(m,p1)
+#define SAP_TRACE_EVENT2(m,p1,p2)
+#define SAP_TRACE_EVENT3(m,p1,p2,p3)
+#define SAP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define SAP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define SAP_TRACE_DEBUG0(m)
+#define SAP_TRACE_DEBUG1(m,p1)
+#define SAP_TRACE_DEBUG2(m,p1,p2)
+#define SAP_TRACE_DEBUG3(m,p1,p2,p3)
+#define SAP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define SAP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the OPP profile
+*/
+#define OPP_TRACE_ERROR0(m)
+#define OPP_TRACE_ERROR1(m,p1)
+#define OPP_TRACE_ERROR2(m,p1,p2)
+#define OPP_TRACE_ERROR3(m,p1,p2,p3)
+#define OPP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define OPP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define OPP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define OPP_TRACE_WARNING0(m)
+#define OPP_TRACE_WARNING1(m,p1)
+#define OPP_TRACE_WARNING2(m,p1,p2)
+#define OPP_TRACE_WARNING3(m,p1,p2,p3)
+#define OPP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define OPP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define OPP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define OPP_TRACE_EVENT0(m)
+#define OPP_TRACE_EVENT1(m,p1)
+#define OPP_TRACE_EVENT2(m,p1,p2)
+#define OPP_TRACE_EVENT3(m,p1,p2,p3)
+#define OPP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define OPP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define OPP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define OPP_TRACE_DEBUG0(m)
+#define OPP_TRACE_DEBUG1(m,p1)
+#define OPP_TRACE_DEBUG2(m,p1,p2)
+#define OPP_TRACE_DEBUG3(m,p1,p2,p3)
+#define OPP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define OPP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define OPP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define OPP_TRACE_API0(m)
+#define OPP_TRACE_API1(m,p1)
+#define OPP_TRACE_API2(m,p1,p2)
+#define OPP_TRACE_API3(m,p1,p2,p3)
+#define OPP_TRACE_API4(m,p1,p2,p3,p4)
+#define OPP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define OPP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the FTP profile
+*/
+#define FTP_TRACE_ERROR0(m)
+#define FTP_TRACE_ERROR1(m,p1)
+#define FTP_TRACE_ERROR2(m,p1,p2)
+#define FTP_TRACE_ERROR3(m,p1,p2,p3)
+#define FTP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define FTP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define FTP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define FTP_TRACE_WARNING0(m)
+#define FTP_TRACE_WARNING1(m,p1)
+#define FTP_TRACE_WARNING2(m,p1,p2)
+#define FTP_TRACE_WARNING3(m,p1,p2,p3)
+#define FTP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define FTP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define FTP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define FTP_TRACE_EVENT0(m)
+#define FTP_TRACE_EVENT1(m,p1)
+#define FTP_TRACE_EVENT2(m,p1,p2)
+#define FTP_TRACE_EVENT3(m,p1,p2,p3)
+#define FTP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define FTP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define FTP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define FTP_TRACE_DEBUG0(m)
+#define FTP_TRACE_DEBUG1(m,p1)
+#define FTP_TRACE_DEBUG2(m,p1,p2)
+#define FTP_TRACE_DEBUG3(m,p1,p2,p3)
+#define FTP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define FTP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define FTP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define FTP_TRACE_API0(m)
+#define FTP_TRACE_API1(m,p1)
+#define FTP_TRACE_API2(m,p1,p2)
+#define FTP_TRACE_API3(m,p1,p2,p3)
+#define FTP_TRACE_API4(m,p1,p2,p3,p4)
+#define FTP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define FTP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for the A2DP profile
+*/
+#define A2D_TRACE_ERROR0(m)
+#define A2D_TRACE_ERROR1(m,p1)
+#define A2D_TRACE_ERROR2(m,p1,p2)
+#define A2D_TRACE_ERROR3(m,p1,p2,p3)
+#define A2D_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define A2D_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define A2D_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define A2D_TRACE_WARNING0(m)
+#define A2D_TRACE_WARNING1(m,p1)
+#define A2D_TRACE_WARNING2(m,p1,p2)
+#define A2D_TRACE_WARNING3(m,p1,p2,p3)
+#define A2D_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define A2D_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define A2D_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define A2D_TRACE_EVENT0(m)
+#define A2D_TRACE_EVENT1(m,p1)
+#define A2D_TRACE_EVENT2(m,p1,p2)
+#define A2D_TRACE_EVENT3(m,p1,p2,p3)
+#define A2D_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define A2D_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define A2D_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define A2D_TRACE_DEBUG0(m)
+#define A2D_TRACE_DEBUG1(m,p1)
+#define A2D_TRACE_DEBUG2(m,p1,p2)
+#define A2D_TRACE_DEBUG3(m,p1,p2,p3)
+#define A2D_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define A2D_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define A2D_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define A2D_TRACE_API0(m)
+#define A2D_TRACE_API1(m,p1)
+#define A2D_TRACE_API2(m,p1,p2)
+#define A2D_TRACE_API3(m,p1,p2,p3)
+#define A2D_TRACE_API4(m,p1,p2,p3,p4)
+#define A2D_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define A2D_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the VDP profile
+*/
+#define VDP_TRACE_ERROR0(m)
+#define VDP_TRACE_ERROR1(m,p1)
+#define VDP_TRACE_ERROR2(m,p1,p2)
+#define VDP_TRACE_ERROR3(m,p1,p2,p3)
+#define VDP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define VDP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define VDP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define VDP_TRACE_WARNING0(m)
+#define VDP_TRACE_WARNING1(m,p1)
+#define VDP_TRACE_WARNING2(m,p1,p2)
+#define VDP_TRACE_WARNING3(m,p1,p2,p3)
+#define VDP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define VDP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define VDP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define VDP_TRACE_EVENT0(m)
+#define VDP_TRACE_EVENT1(m,p1)
+#define VDP_TRACE_EVENT2(m,p1,p2)
+#define VDP_TRACE_EVENT3(m,p1,p2,p3)
+#define VDP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define VDP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define VDP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define VDP_TRACE_DEBUG0(m)
+#define VDP_TRACE_DEBUG1(m,p1)
+#define VDP_TRACE_DEBUG2(m,p1,p2)
+#define VDP_TRACE_DEBUG3(m,p1,p2,p3)
+#define VDP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define VDP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define VDP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define VDP_TRACE_API0(m)
+#define VDP_TRACE_API1(m,p1)
+#define VDP_TRACE_API2(m,p1,p2)
+#define VDP_TRACE_API3(m,p1,p2,p3)
+#define VDP_TRACE_API4(m,p1,p2,p3,p4)
+#define VDP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define VDP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for the LM unit
+*/
+#define LMP_TRACE_ERROR0(m)
+#define LMP_TRACE_ERROR1(m,p1)
+#define LMP_TRACE_ERROR2(m,p1,p2)
+#define LMP_TRACE_ERROR3(m,p1,p2,p3)
+#define LMP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define LMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define LMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define LMP_TRACE_WARNING0(m)
+#define LMP_TRACE_WARNING1(m,p1)
+#define LMP_TRACE_WARNING2(m,p1,p2)
+#define LMP_TRACE_WARNING3(m,p1,p2,p3)
+#define LMP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define LMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define LMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define LMP_TRACE_EVENT0(m)
+#define LMP_TRACE_EVENT1(m,p1)
+#define LMP_TRACE_EVENT2(m,p1,p2)
+#define LMP_TRACE_EVENT3(m,p1,p2,p3)
+#define LMP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define LMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define LMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define LMP_TRACE_DEBUG0(m)
+#define LMP_TRACE_DEBUG1(m,p1)
+#define LMP_TRACE_DEBUG2(m,p1,p2)
+#define LMP_TRACE_DEBUG3(m,p1,p2,p3)
+#define LMP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define LMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define LMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the LC unit
+*/
+#define LC_TRACE_ERROR0(m)
+#define LC_TRACE_ERROR1(m,p1)
+#define LC_TRACE_ERROR2(m,p1,p2)
+#define LC_TRACE_ERROR3(m,p1,p2,p3)
+#define LC_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define LC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define LC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define LC_TRACE_WARNING0(m)
+#define LC_TRACE_WARNING1(m,p1)
+#define LC_TRACE_WARNING2(m,p1,p2)
+#define LC_TRACE_WARNING3(m,p1,p2,p3)
+#define LC_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define LC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define LC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define LC_TRACE_EVENT0(m)
+#define LC_TRACE_EVENT1(m,p1)
+#define LC_TRACE_EVENT2(m,p1,p2)
+#define LC_TRACE_EVENT3(m,p1,p2,p3)
+#define LC_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define LC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define LC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define LC_TRACE_DEBUG0(m)
+#define LC_TRACE_DEBUG1(m,p1)
+#define LC_TRACE_DEBUG2(m,p1,p2)
+#define LC_TRACE_DEBUG3(m,p1,p2,p3)
+#define LC_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define LC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define LC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDA_TRACE_ERROR0(m)
+#define SDA_TRACE_ERROR1(m,p1)
+#define SDA_TRACE_ERROR2(m,p1,p2)
+#define SDA_TRACE_ERROR3(m,p1,p2,p3)
+#define SDA_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define SDA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define SDA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDA_TRACE_WARNING0(m)
+#define SDA_TRACE_WARNING1(m,p1)
+#define SDA_TRACE_WARNING2(m,p1,p2)
+#define SDA_TRACE_WARNING3(m,p1,p2,p3)
+#define SDA_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define SDA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define SDA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDA_TRACE_EVENT0(m)
+#define SDA_TRACE_EVENT1(m,p1)
+#define SDA_TRACE_EVENT2(m,p1,p2)
+#define SDA_TRACE_EVENT3(m,p1,p2,p3)
+#define SDA_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define SDA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define SDA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define SDA_TRACE_DEBUG0(m)
+#define SDA_TRACE_DEBUG1(m,p1)
+#define SDA_TRACE_DEBUG2(m,p1,p2)
+#define SDA_TRACE_DEBUG3(m,p1,p2,p3)
+#define SDA_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define SDA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define SDA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* AVDTP
+*/
+#define AVDT_TRACE_ERROR0(m)
+#define AVDT_TRACE_ERROR1(m,p1)
+#define AVDT_TRACE_ERROR2(m,p1,p2)
+#define AVDT_TRACE_ERROR3(m,p1,p2,p3)
+#define AVDT_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define AVDT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define AVDT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVDT_TRACE_WARNING0(m)
+#define AVDT_TRACE_WARNING1(m,p1)
+#define AVDT_TRACE_WARNING2(m,p1,p2)
+#define AVDT_TRACE_WARNING3(m,p1,p2,p3)
+#define AVDT_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define AVDT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define AVDT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVDT_TRACE_EVENT0(m)
+#define AVDT_TRACE_EVENT1(m,p1)
+#define AVDT_TRACE_EVENT2(m,p1,p2)
+#define AVDT_TRACE_EVENT3(m,p1,p2,p3)
+#define AVDT_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define AVDT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define AVDT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVDT_TRACE_DEBUG0(m)
+#define AVDT_TRACE_DEBUG1(m,p1)
+#define AVDT_TRACE_DEBUG2(m,p1,p2)
+#define AVDT_TRACE_DEBUG3(m,p1,p2,p3)
+#define AVDT_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define AVDT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define AVDT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVDT_TRACE_API0(m)
+#define AVDT_TRACE_API1(m,p1)
+#define AVDT_TRACE_API2(m,p1,p2)
+#define AVDT_TRACE_API3(m,p1,p2,p3)
+#define AVDT_TRACE_API4(m,p1,p2,p3,p4)
+#define AVDT_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define AVDT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the AVCTP protocol
+*/
+#define AVCT_TRACE_ERROR0(m)
+#define AVCT_TRACE_ERROR1(m,p1)
+#define AVCT_TRACE_ERROR2(m,p1,p2)
+#define AVCT_TRACE_ERROR3(m,p1,p2,p3)
+#define AVCT_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define AVCT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define AVCT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVCT_TRACE_WARNING0(m)
+#define AVCT_TRACE_WARNING1(m,p1)
+#define AVCT_TRACE_WARNING2(m,p1,p2)
+#define AVCT_TRACE_WARNING3(m,p1,p2,p3)
+#define AVCT_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define AVCT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define AVCT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVCT_TRACE_EVENT0(m)
+#define AVCT_TRACE_EVENT1(m,p1)
+#define AVCT_TRACE_EVENT2(m,p1,p2)
+#define AVCT_TRACE_EVENT3(m,p1,p2,p3)
+#define AVCT_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define AVCT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define AVCT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVCT_TRACE_DEBUG0(m)
+#define AVCT_TRACE_DEBUG1(m,p1)
+#define AVCT_TRACE_DEBUG2(m,p1,p2)
+#define AVCT_TRACE_DEBUG3(m,p1,p2,p3)
+#define AVCT_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define AVCT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define AVCT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVCT_TRACE_API0(m)
+#define AVCT_TRACE_API1(m,p1)
+#define AVCT_TRACE_API2(m,p1,p2)
+#define AVCT_TRACE_API3(m,p1,p2,p3)
+#define AVCT_TRACE_API4(m,p1,p2,p3,p4)
+#define AVCT_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define AVCT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+
+/* Define tracing for the AVRCP profile
+*/
+#define AVRC_TRACE_ERROR0(m)
+#define AVRC_TRACE_ERROR1(m,p1)
+#define AVRC_TRACE_ERROR2(m,p1,p2)
+#define AVRC_TRACE_ERROR3(m,p1,p2,p3)
+#define AVRC_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define AVRC_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define AVRC_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVRC_TRACE_WARNING0(m)
+#define AVRC_TRACE_WARNING1(m,p1)
+#define AVRC_TRACE_WARNING2(m,p1,p2)
+#define AVRC_TRACE_WARNING3(m,p1,p2,p3)
+#define AVRC_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define AVRC_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define AVRC_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVRC_TRACE_EVENT0(m)
+#define AVRC_TRACE_EVENT1(m,p1)
+#define AVRC_TRACE_EVENT2(m,p1,p2)
+#define AVRC_TRACE_EVENT3(m,p1,p2,p3)
+#define AVRC_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define AVRC_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define AVRC_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVRC_TRACE_DEBUG0(m)
+#define AVRC_TRACE_DEBUG1(m,p1)
+#define AVRC_TRACE_DEBUG2(m,p1,p2)
+#define AVRC_TRACE_DEBUG3(m,p1,p2,p3)
+#define AVRC_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define AVRC_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define AVRC_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define AVRC_TRACE_API0(m)
+#define AVRC_TRACE_API1(m,p1)
+#define AVRC_TRACE_API2(m,p1,p2)
+#define AVRC_TRACE_API3(m,p1,p2,p3)
+#define AVRC_TRACE_API4(m,p1,p2,p3,p4)
+#define AVRC_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define AVRC_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* MCAP
+*/
+#define MCA_TRACE_ERROR0(m)
+#define MCA_TRACE_ERROR1(m,p1)
+#define MCA_TRACE_ERROR2(m,p1,p2)
+#define MCA_TRACE_ERROR3(m,p1,p2,p3)
+#define MCA_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define MCA_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define MCA_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define MCA_TRACE_WARNING0(m)
+#define MCA_TRACE_WARNING1(m,p1)
+#define MCA_TRACE_WARNING2(m,p1,p2)
+#define MCA_TRACE_WARNING3(m,p1,p2,p3)
+#define MCA_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define MCA_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define MCA_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define MCA_TRACE_EVENT0(m)
+#define MCA_TRACE_EVENT1(m,p1)
+#define MCA_TRACE_EVENT2(m,p1,p2)
+#define MCA_TRACE_EVENT3(m,p1,p2,p3)
+#define MCA_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define MCA_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define MCA_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define MCA_TRACE_DEBUG0(m)
+#define MCA_TRACE_DEBUG1(m,p1)
+#define MCA_TRACE_DEBUG2(m,p1,p2)
+#define MCA_TRACE_DEBUG3(m,p1,p2,p3)
+#define MCA_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define MCA_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define MCA_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#define MCA_TRACE_API0(m)
+#define MCA_TRACE_API1(m,p1)
+#define MCA_TRACE_API2(m,p1,p2)
+#define MCA_TRACE_API3(m,p1,p2,p3)
+#define MCA_TRACE_API4(m,p1,p2,p3,p4)
+#define MCA_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define MCA_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the AMP unit
+*/
+#define AMP_TRACE_ERROR0(m)
+#define AMP_TRACE_ERROR1(m,p1)
+#define AMP_TRACE_ERROR2(m,p1,p2)
+#define AMP_TRACE_ERROR3(m,p1,p2,p3)
+#define AMP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define AMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define AMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define AMP_TRACE_WARNING0(m)
+#define AMP_TRACE_WARNING1(m,p1)
+#define AMP_TRACE_WARNING2(m,p1,p2)
+#define AMP_TRACE_WARNING3(m,p1,p2,p3)
+#define AMP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define AMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define AMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define AMP_TRACE_API0(m)
+#define AMP_TRACE_API1(m,p1)
+#define AMP_TRACE_API2(m,p1,p2)
+#define AMP_TRACE_API3(m,p1,p2,p3)
+#define AMP_TRACE_API4(m,p1,p2,p3,p4)
+#define AMP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define AMP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define AMP_TRACE_EVENT0(m)
+#define AMP_TRACE_EVENT1(m,p1)
+#define AMP_TRACE_EVENT2(m,p1,p2)
+#define AMP_TRACE_EVENT3(m,p1,p2,p3)
+#define AMP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define AMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define AMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define AMP_TRACE_DEBUG0(m)
+#define AMP_TRACE_DEBUG1(m,p1)
+#define AMP_TRACE_DEBUG2(m,p1,p2)
+#define AMP_TRACE_DEBUG3(m,p1,p2,p3)
+#define AMP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define AMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define AMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the GATT
+*/
+#define GATT_TRACE_ERROR0(m)
+#define GATT_TRACE_ERROR1(m,p1)
+#define GATT_TRACE_ERROR2(m,p1,p2)
+#define GATT_TRACE_ERROR3(m,p1,p2,p3)
+#define GATT_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define GATT_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define GATT_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define GATT_TRACE_WARNING0(m)
+#define GATT_TRACE_WARNING1(m,p1)
+#define GATT_TRACE_WARNING2(m,p1,p2)
+#define GATT_TRACE_WARNING3(m,p1,p2,p3)
+#define GATT_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define GATT_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define GATT_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define GATT_TRACE_API0(m)
+#define GATT_TRACE_API1(m,p1)
+#define GATT_TRACE_API2(m,p1,p2)
+#define GATT_TRACE_API3(m,p1,p2,p3)
+#define GATT_TRACE_API4(m,p1,p2,p3,p4)
+#define GATT_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define GATT_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define GATT_TRACE_EVENT0(m)
+#define GATT_TRACE_EVENT1(m,p1)
+#define GATT_TRACE_EVENT2(m,p1,p2)
+#define GATT_TRACE_EVENT3(m,p1,p2,p3)
+#define GATT_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define GATT_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define GATT_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define GATT_TRACE_DEBUG0(m)
+#define GATT_TRACE_DEBUG1(m,p1)
+#define GATT_TRACE_DEBUG2(m,p1,p2)
+#define GATT_TRACE_DEBUG3(m,p1,p2,p3)
+#define GATT_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define GATT_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define GATT_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+/* Define tracing for the SMP unit
+*/
+#define SMP_TRACE_ERROR0(m)
+#define SMP_TRACE_ERROR1(m,p1)
+#define SMP_TRACE_ERROR2(m,p1,p2)
+#define SMP_TRACE_ERROR3(m,p1,p2,p3)
+#define SMP_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define SMP_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define SMP_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define SMP_TRACE_WARNING0(m)
+#define SMP_TRACE_WARNING1(m,p1)
+#define SMP_TRACE_WARNING2(m,p1,p2)
+#define SMP_TRACE_WARNING3(m,p1,p2,p3)
+#define SMP_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define SMP_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define SMP_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define SMP_TRACE_API0(m)
+#define SMP_TRACE_API1(m,p1)
+#define SMP_TRACE_API2(m,p1,p2)
+#define SMP_TRACE_API3(m,p1,p2,p3)
+#define SMP_TRACE_API4(m,p1,p2,p3,p4)
+#define SMP_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define SMP_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define SMP_TRACE_EVENT0(m)
+#define SMP_TRACE_EVENT1(m,p1)
+#define SMP_TRACE_EVENT2(m,p1,p2)
+#define SMP_TRACE_EVENT3(m,p1,p2,p3)
+#define SMP_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define SMP_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define SMP_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define SMP_TRACE_DEBUG0(m)
+#define SMP_TRACE_DEBUG1(m,p1)
+#define SMP_TRACE_DEBUG2(m,p1,p2)
+#define SMP_TRACE_DEBUG3(m,p1,p2,p3)
+#define SMP_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define SMP_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define SMP_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#endif
+
+#if (BT_TRACE_BTIF == TRUE)
+
+extern UINT8 btif_trace_level;
+
+/* define traces for application */
+#define BTIF_TRACE_ERROR0(m)                    {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, (m));}
+#define BTIF_TRACE_ERROR1(m,p1)                 {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_ERROR2(m,p1,p2)              {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_ERROR3(m,p1,p2,p3)           {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_ERROR4(m,p1,p2,p3,p4)        {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_ERROR5(m,p1,p2,p3,p4,p5)     {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)  {if (btif_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define BTIF_TRACE_WARNING0(m)                  {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, (m));}
+#define BTIF_TRACE_WARNING1(m,p1)               {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_WARNING2(m,p1,p2)            {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_WARNING3(m,p1,p2,p3)         {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_WARNING4(m,p1,p2,p3,p4)      {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_WARNING5(m,p1,p2,p3,p4,p5)   {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (btif_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define BTIF_TRACE_API0(m)                      {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, (m));}
+#define BTIF_TRACE_API1(m,p1)                   {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_API2(m,p1,p2)                {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_API3(m,p1,p2,p3)             {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_API4(m,p1,p2,p3,p4)          {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_API5(m,p1,p2,p3,p4,p5)       {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_API6(m,p1,p2,p3,p4,p5,p6)    {if (btif_trace_level >= BT_TRACE_LEVEL_API) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define BTIF_TRACE_EVENT0(m)                    {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, (m));}
+#define BTIF_TRACE_EVENT1(m,p1)                 {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_EVENT2(m,p1,p2)              {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_EVENT3(m,p1,p2,p3)           {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_EVENT4(m,p1,p2,p3,p4)        {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_EVENT5(m,p1,p2,p3,p4,p5)     {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)  {if (btif_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define BTIF_TRACE_DEBUG0(m)                    {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, (m));}
+#define BTIF_TRACE_DEBUG1(m,p1)                 {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_DEBUG2(m,p1,p2)              {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_DEBUG3(m,p1,p2,p3)           {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_DEBUG4(m,p1,p2,p3,p4)        {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)     {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)  {if (btif_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define BTIF_TRACE_VERBOSE0(m)                    {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, (m));}
+#define BTIF_TRACE_VERBOSE1(m,p1)                 {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1));}
+#define BTIF_TRACE_VERBOSE2(m,p1,p2)              {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define BTIF_TRACE_VERBOSE3(m,p1,p2,p3)           {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define BTIF_TRACE_VERBOSE4(m,p1,p2,p3,p4)        {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define BTIF_TRACE_VERBOSE5(m,p1,p2,p3,p4,p5)     {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define BTIF_TRACE_VERBOSE6(m,p1,p2,p3,p4,p5,p6)  {if (btif_trace_level >= BT_TRACE_LEVEL_VERBOSE) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#else
+/* define traces for Application */
+
+#define BTIF_TRACE_ERROR0(m)
+#define BTIF_TRACE_ERROR1(m,p1)
+#define BTIF_TRACE_ERROR2(m,p1,p2)
+#define BTIF_TRACE_ERROR3(m,p1,p2,p3)
+#define BTIF_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+#define BTIF_TRACE_ERROR7(m,p1,p2,p3,p4,p5,p6,p7)
+
+
+#define BTIF_TRACE_WARNING0(m)
+#define BTIF_TRACE_WARNING1(m,p1)
+#define BTIF_TRACE_WARNING2(m,p1,p2)
+#define BTIF_TRACE_WARNING3(m,p1,p2,p3)
+#define BTIF_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+#define BTIF_TRACE_WARNING7(m,p1,p2,p3,p4,p5,p6,p7)
+
+
+#define BTIF_TRACE_API0(m)
+#define BTIF_TRACE_API1(m,p1)
+#define BTIF_TRACE_API2(m,p1,p2)
+#define BTIF_TRACE_API3(m,p1,p2,p3)
+#define BTIF_TRACE_API4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTIF_TRACE_EVENT0(m)
+#define BTIF_TRACE_EVENT1(m,p1)
+#define BTIF_TRACE_EVENT2(m,p1,p2)
+#define BTIF_TRACE_EVENT3(m,p1,p2,p3)
+#define BTIF_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define BTIF_TRACE_DEBUG0(m)
+#define BTIF_TRACE_DEBUG1(m,p1)
+#define BTIF_TRACE_DEBUG2(m,p1,p2)
+#define BTIF_TRACE_DEBUG3(m,p1,p2,p3)
+#define BTIF_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+#define BTIF_TRACE_DEBUG7(m,p1,p2,p3,p4,p5,p6,p7)
+#define BTIF_TRACE_DEBUG8(m,p1,p2,p3,p4,p5,p6,p7,p8)
+
+
+
+
+#define BTIF_TRACE_VERBOSE0(m)
+#define BTIF_TRACE_VERBOSE1(m,p1)
+#define BTIF_TRACE_VERBOSE2(m,p1,p2)
+#define BTIF_TRACE_VERBOSE3(m,p1,p2,p3)
+#define BTIF_TRACE_VERBOSE4(m,p1,p2,p3,p4)
+#define BTIF_TRACE_VERBOSE5(m,p1,p2,p3,p4,p5)
+#define BTIF_TRACE_VERBOSE6(m,p1,p2,p3,p4,p5,p6)
+
+#endif
+
+
+#if (BT_USE_TRACES == TRUE || BT_TRACE_APPL == TRUE)
+
+/* define traces for application */
+#define APPL_TRACE_ERROR0(m)                    {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, (m));}
+#define APPL_TRACE_ERROR1(m,p1)                 {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1));}
+#define APPL_TRACE_ERROR2(m,p1,p2)              {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define APPL_TRACE_ERROR3(m,p1,p2,p3)           {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define APPL_TRACE_ERROR4(m,p1,p2,p3,p4)        {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define APPL_TRACE_ERROR5(m,p1,p2,p3,p4,p5)     {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define APPL_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)  {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_ERROR, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define APPL_TRACE_WARNING0(m)                  {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, (m));}
+#define APPL_TRACE_WARNING1(m,p1)               {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1));}
+#define APPL_TRACE_WARNING2(m,p1,p2)            {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define APPL_TRACE_WARNING3(m,p1,p2,p3)         {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define APPL_TRACE_WARNING4(m,p1,p2,p3,p4)      {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define APPL_TRACE_WARNING5(m,p1,p2,p3,p4,p5)   {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define APPL_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6) {if (appl_trace_level >= BT_TRACE_LEVEL_WARNING) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_WARNING, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define APPL_TRACE_API0(m)                      {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, (m));}
+#define APPL_TRACE_API1(m,p1)                   {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1));}
+#define APPL_TRACE_API2(m,p1,p2)                {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define APPL_TRACE_API3(m,p1,p2,p3)             {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define APPL_TRACE_API4(m,p1,p2,p3,p4)          {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define APPL_TRACE_API5(m,p1,p2,p3,p4,p5)       {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define APPL_TRACE_API6(m,p1,p2,p3,p4,p5,p6)    {if (appl_trace_level >= BT_TRACE_LEVEL_API) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_API, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define APPL_TRACE_EVENT0(m)                    {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, (m));}
+#define APPL_TRACE_EVENT1(m,p1)                 {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1));}
+#define APPL_TRACE_EVENT2(m,p1,p2)              {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define APPL_TRACE_EVENT3(m,p1,p2,p3)           {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define APPL_TRACE_EVENT4(m,p1,p2,p3,p4)        {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define APPL_TRACE_EVENT5(m,p1,p2,p3,p4,p5)     {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define APPL_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)  {if (appl_trace_level >= BT_TRACE_LEVEL_EVENT) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_EVENT, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+
+#define APPL_TRACE_DEBUG0(m)                    {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_0(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, (m));}
+#define APPL_TRACE_DEBUG1(m,p1)                 {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_1(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1));}
+#define APPL_TRACE_DEBUG2(m,p1,p2)              {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_2(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2));}
+#define APPL_TRACE_DEBUG3(m,p1,p2,p3)           {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_3(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3));}
+#define APPL_TRACE_DEBUG4(m,p1,p2,p3,p4)        {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_4(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4));}
+#define APPL_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)     {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_5(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5));}
+#define APPL_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)  {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg_6(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, \
+                                                        (m), (UINT32)(p1), (UINT32)(p2), (UINT32)(p3), (UINT32)(p4), (UINT32)(p5), (UINT32)(p6));}
+#else
+/* define traces for Application */
+
+#define APPL_TRACE_ERROR0(m)
+#define APPL_TRACE_ERROR1(m,p1)
+#define APPL_TRACE_ERROR2(m,p1,p2)
+#define APPL_TRACE_ERROR3(m,p1,p2,p3)
+#define APPL_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define APPL_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define APPL_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+#define APPL_TRACE_WARNING0(m)
+#define APPL_TRACE_WARNING1(m,p1)
+#define APPL_TRACE_WARNING2(m,p1,p2)
+#define APPL_TRACE_WARNING3(m,p1,p2,p3)
+#define APPL_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define APPL_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define APPL_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+
+#define APPL_TRACE_API0(m)
+#define APPL_TRACE_API1(m,p1)
+#define APPL_TRACE_API2(m,p1,p2)
+#define APPL_TRACE_API3(m,p1,p2,p3)
+#define APPL_TRACE_API4(m,p1,p2,p3,p4)
+#define APPL_TRACE_API5(m,p1,p2,p3,p4,p5)
+#define APPL_TRACE_API6(m,p1,p2,p3,p4,p5,p6)
+
+#define APPL_TRACE_EVENT0(m)
+#define APPL_TRACE_EVENT1(m,p1)
+#define APPL_TRACE_EVENT2(m,p1,p2)
+#define APPL_TRACE_EVENT3(m,p1,p2,p3)
+#define APPL_TRACE_EVENT4(m,p1,p2,p3,p4)
+#define APPL_TRACE_EVENT5(m,p1,p2,p3,p4,p5)
+#define APPL_TRACE_EVENT6(m,p1,p2,p3,p4,p5,p6)
+
+#define APPL_TRACE_DEBUG0(m)
+#define APPL_TRACE_DEBUG1(m,p1)
+#define APPL_TRACE_DEBUG2(m,p1,p2)
+#define APPL_TRACE_DEBUG3(m,p1,p2,p3)
+#define APPL_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define APPL_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define APPL_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+#endif
+
+#if ((MMI_INCLUDED == TRUE) && (!defined(HID_MSKB_INCLUDED) || (HID_MSKB_INCLUDED == FALSE)))
+/* UI for sample applications */
+#define SAP_TRACE_0(m)                            MMI_Echo(m)
+#define SAP_TRACE_1(m,p1)                         MMI_Echo(m,p1)
+#define SAP_TRACE_2(m,p1,p2)                      MMI_Echo(m,p1,p2)
+#define SAP_TRACE_3(m,p1,p2,p3)                   MMI_Echo(m,p1,p2,p3)
+#define SAP_TRACE_4(m,p1,p2,p3,p4)                MMI_Echo(m,p1,p2,p3,p4)
+#define SAP_TRACE_5(m,p1,p2,p3,p4,p5)             MMI_Echo(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_6(m,p1,p2,p3,p4,p5,p6)          MMI_Echo(m,p1,p2,p3,p4,p5,p6)
+#else
+#define SAP_TRACE_0(m)
+#define SAP_TRACE_1(m,p1)
+#define SAP_TRACE_2(m,p1,p2)
+#define SAP_TRACE_3(m,p1,p2,p3)
+#define SAP_TRACE_4(m,p1,p2,p3,p4)
+#define SAP_TRACE_5(m,p1,p2,p3,p4,p5)
+#define SAP_TRACE_6(m,p1,p2,p3,p4,p5,p6)
+
+#endif  /* End of MMI_INCLUDED */
+#if defined(DRV_DEBUG_MSG) && (DRV_DEBUG_MSG == TRUE)
+/* Driver Trace macros
+*/
+#define DRV_TRACE_WARNING0(m)                      APPL_TRACE_WARNING0(m)
+#define DRV_TRACE_WARNING1(m,p1)                   APPL_TRACE_WARNING1(m,p1)
+#define DRV_TRACE_WARNING2(m,p1,p2)                APPL_TRACE_WARNING2(m,p1,p2)
+#define DRV_TRACE_WARNING3(m,p1,p2,p3)             APPL_TRACE_WARNING3(m,p1,p2,p3)
+#define DRV_TRACE_WARNING4(m,p1,p2,p3,p4)          APPL_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define DRV_TRACE_WARNING5(m,p1,p2,p3,p4,p5)       APPL_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define DRV_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)    APPL_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+#else
+/* Driver Trace macros
+*/
+#define DRV_TRACE_WARNING0(m)
+#define DRV_TRACE_WARNING1(m,p1)
+#define DRV_TRACE_WARNING2(m,p1,p2)
+#define DRV_TRACE_WARNING3(m,p1,p2,p3)
+#define DRV_TRACE_WARNING4(m,p1,p2,p3,p4)
+#define DRV_TRACE_WARNING5(m,p1,p2,p3,p4,p5)
+#define DRV_TRACE_WARNING6(m,p1,p2,p3,p4,p5,p6)
+#endif
+
+#define DRV_TRACE_ERROR0(m)                      APPL_TRACE_ERROR0(m)
+#define DRV_TRACE_ERROR1(m,p1)                   APPL_TRACE_ERROR1(m,p1)
+#define DRV_TRACE_ERROR2(m,p1,p2)                APPL_TRACE_ERROR2(m,p1,p2)
+#define DRV_TRACE_ERROR3(m,p1,p2,p3)             APPL_TRACE_ERROR3(m,p1,p2,p3)
+#define DRV_TRACE_ERROR4(m,p1,p2,p3,p4)          APPL_TRACE_ERROR4(m,p1,p2,p3,p4)
+#define DRV_TRACE_ERROR5(m,p1,p2,p3,p4,p5)       APPL_TRACE_ERROR5(m,p1,p2,p3,p4,p5)
+#define DRV_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)    APPL_TRACE_ERROR6(m,p1,p2,p3,p4,p5,p6)
+
+/* Driver Trace macros
+*/
+#define DRV_TRACE_DEBUG0(m)                    APPL_TRACE_DEBUG0(m)
+#define DRV_TRACE_DEBUG1(m,p1)                 APPL_TRACE_DEBUG1(m,p1)
+#define DRV_TRACE_DEBUG2(m,p1,p2)              APPL_TRACE_DEBUG2(m,p1,p2)
+#define DRV_TRACE_DEBUG3(m,p1,p2,p3)           APPL_TRACE_DEBUG3(m,p1,p2,p3)
+#define DRV_TRACE_DEBUG4(m,p1,p2,p3,p4)        APPL_TRACE_DEBUG4(m,p1,p2,p3,p4)
+#define DRV_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)     APPL_TRACE_DEBUG5(m,p1,p2,p3,p4,p5)
+#define DRV_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)  APPL_TRACE_DEBUG6(m,p1,p2,p3,p4,p5,p6)
+
+
+#endif /* BT_TRACE_H */
+
+
diff --git a/include/bte.h b/include/bte.h
new file mode 100644
index 0000000..103b660
--- /dev/null
+++ b/include/bte.h
@@ -0,0 +1,119 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains constants and definitions for the bte project
+ *
+ ******************************************************************************/
+#ifndef BTE_H
+#define BTE_H
+
+#include <semaphore.h>
+#include <signal.h>
+#include <pthread.h>
+#include "bt_target.h"
+
+/* by default on shutdown, baudrate is reset 115kbits. this should NOT be need for platforms
+ * that kill BTE driver and remove/reset BT chip
+ */
+#ifndef BTE_RESET_BAUD_ON_BT_DISABLE
+#define BTE_RESET_BAUD_ON_BT_DISABLE TRUE
+#endif
+
+/* Target Modes (based on jumper settings on hardware [see user manual]) */
+enum
+{
+                            /* BTE                  BBY                     */
+                            /* J3   J4              SW3-3   SW3-2   SW3-1   */
+                            /* -------------------------------------------- */
+    BTE_MODE_SERIAL_APP,    /* OUT  OUT             OFF     OFF     OFF     Sample serial port application      */
+    BTE_MODE_APPL,    	    /* IN   OUT             OFF     OFF     ON      Target used with Tester through RPC */
+    BTE_MODE_RESERVED,      /* OUT  IN              OFF     ON      OFF     Reserved                            */
+    BTE_MODE_SAMPLE_APPS,   /* IN   IN              OFF     ON      ON      Sample applications (ICP/HSP)       */
+    BTE_MODE_DONGLE,        /* not yet supported    ON      OFF     OFF     Dongle mode                         */
+    BTE_MODE_APPL_PROTOCOL_TRACE, /* this is a fake mode do allow protocol tracing in application without rpc */
+    BTE_MODE_INVALID
+};
+
+extern volatile UINT8    bte_target_mode;    /* indicates the mode that the board is running in */
+
+/* Startup options */
+extern UINT32 bte_startup_options;                      /* Switch and jumper settings at startup */
+void bte_get_startup_options(UINT32 *p_options);        /* Platform specific function for getting startup options */
+
+#define BTE_OPTIONS_TARGET_MODE_MASK    0x00000007      /* bits 2-0 indicate target mode (QuickConnect: jp3 & jp4, BBY: SW3-1 & SW3-2)*/
+
+
+/****************************************************************************
+ * Definitions to define which type of application gets built
+ ****************************************************************************/
+#define BUILD_HCITOOL         FALSE
+#define BUILD_L2PING          FALSE
+
+
+#define LINUX_FM_DRIVER_INCLUDED		FALSE
+
+
+/* hcisu userial operations. should probably go into bt_types to avoid collisions! */
+#define BT_EVT_TO_HCISU_USERIAL_OP (0x0080 | BT_EVT_HCISU)
+/* operation for above hcisu event */
+#define BT_HCISU_USERIAL_OPEN (0)   /* open serial port calling USERIAL_Open() */
+#define BT_HCISU_USERIAL_CLOSE (1)  /* close userial port */
+/* options associated with close op */
+#define BT_HCISU_USERIAL_CL_NO_DIS_BT   0 /* do not touch bt_wake and power gpio */
+#define BT_HCISU_USERIAL_CL_DIS_BT      1 /* put power and bt_wake into defined off state to preserve
+                                             power */
+/* status codes for callback */
+#define BTE_HCISU_USERIAL_FAIL      0
+#define BTE_HCISU_USERIAL_OK        1
+typedef void (tUSERIAL_MSG_CBACK) (int status);
+typedef struct tHCISU_USERIAL_MSG_tag {
+    BT_HDR      hdr;
+    tUSERIAL_MSG_CBACK *p_cback;
+    UINT8       port;   /* port number */
+    UINT8       op;
+    UINT8       option; /* option for operation. depends on operation */
+} tHCISU_USERIAL_MSG;
+
+extern void bte_hcisu_userial_oper( tUSERIAL_MSG_CBACK *p_cback, UINT8 port, UINT8 op, UINT8 option );
+
+/* Pointer to function for sending HCI commands and data to the HCI tranport */
+extern int (*p_bte_hci_send)(UINT16 port, BT_HDR *p_msg);
+
+
+/* Protocol trace mask */
+extern UINT32 bte_proto_trace_mask;
+
+/* Version string */
+extern const UINT8 bte_version_string[];
+
+typedef struct tBAUD_REG_tag {
+    UINT8 DHBR;
+    UINT8 DLBR;
+    UINT8 ExplicitBaudRate0;
+    UINT8 ExplicitBaudRate1;
+    UINT8 ExplicitBaudRate2;
+    UINT8 ExplicitBaudRate3;
+} tBAUD_REG;
+
+#include "gki.h"
+
+extern const tBAUD_REG baud_rate_regs[];
+
+#endif  /* BTE_H */
diff --git a/include/bte_appl.h b/include/bte_appl.h
new file mode 100644
index 0000000..63689da
--- /dev/null
+++ b/include/bte_appl.h
@@ -0,0 +1,193 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the interface file for the bte application task
+ *
+ ******************************************************************************/
+
+#ifndef BTE_APPL_H
+#define BTE_APPL_H
+
+#include "btm_int.h"
+#include "bta_api.h"
+#include "bta_sys.h"
+#include "bte.h"
+
+/* Maximum length for serial port device name */
+#ifndef BTE_APPL_MAX_USERIAL_DEV_NAME
+#define BTE_APPL_MAX_USERIAL_DEV_NAME       (256)
+#endif
+#ifndef BTAPP_AHF_API_SUPPORT
+#define BTAPP_AHF_API_SUPPORT FALSE
+#endif
+
+/* BTA APP_IDs */
+#define UI_DM_ID    1
+#define UI_PRM_ID   20
+/* this defines the enabled BTA modules. client may not be defined as those are enabled at run time.
+ * they are defined for completeness. please check with bta_sys.h for new modules.
+ * BTA_ID_DM serves as flag for BTA_EnableBluetooth()
+ * BTA_ID_RES can be used to fs ID in bte_appl.
+ */
+
+#define BTAPP_NUM_ID_BLOCKS ((BTA_ID_MAX/32)+1)        /* number of 32 bit required to store one bit per
+                                                            btapp id */
+
+#define BTAPP_APPL_MAIL_EVENT(x)  (x<<8)    /* define bte_appl task mail box event. LSB contains
+                                                BTA_ID_xxx (see bta_sys.h) */
+#define BTAPP_APPL_MAIL_EVT       0xff00    /* high byte contains bitmap of application module event */
+
+/* helper macro to copy BTA callack data y into message buffer x, for event data structure z */
+#define MEMCPY_APPL_MSG(x, y, z)  memcpy( (void *)(((UINT8 *)x)+sizeof(BT_HDR)), (void *)y, sizeof(z) )
+
+/* Event masks for BTE_APPL_TASK */
+#define BTE_APPL_STARTUP_EVT    EVENT_MASK(APPL_EVT_0)      /* Bluetooth has started */
+#define BTE_APPL_SHUTDOWN_EVT   EVENT_MASK(APPL_EVT_1)      /* Bluetooth is shutting down */
+#define BTE_APPL_SOCKET_RX_EVT  EVENT_MASK(APPL_EVT_2)      /* Socket data ready to be read */
+#define BTE_APPL_DBUS_RX_EVT    EVENT_MASK(APPL_EVT_3)      /* DBUS message ready to be read */
+#define BTE_APPL_BTA_ENABLE_EVT EVENT_MASK(APPL_EVT_4)      /* BTA Enabled event */
+
+
+/* Application configuration */
+#define BTE_APPL_PATCHRAM_PATH_MAXLEN   128
+#define BTE_APPL_CONTACTS_DB_PATH       256
+
+typedef struct {
+    char    patchram_path[BTE_APPL_PATCHRAM_PATH_MAXLEN+1];
+    UINT32  patchram_addr;
+    UINT32  reconfig_baud;
+    UINT32  clock_rate;             /* clock rate (for uart baud calculation) */
+    BD_ADDR local_addr;             /* local bd addr */
+    BD_ADDR rem_addr;
+    UINT8   lpm_enabled;
+    UINT8   bt_wake_polarity;
+    UINT8   host_wake_polarity;
+    BOOLEAN ag_enable_3way_conf;
+    UINT16  ag_voice_settings;
+    UINT8   ag_vsc_pcm_config[5];
+    UINT8   ag_vsc_sco_pcm[5];
+    /*tBTM_CMPL_CB*/ tBTM_DEV_STATUS_CB *p_reset_cplt_cb;  /* Current reset_cplt_cb */
+    char    contacts_db[BTE_APPL_CONTACTS_DB_PATH+1];
+    UINT32  bta_module_state[BTAPP_NUM_ID_BLOCKS]; /* state of enabled bta modules */
+#if (BTAPP_AHF_API_SUPPORT==TRUE)
+    UINT8   afh_first;
+    UINT8   afh_last;
+#endif
+} tBTE_APPL_CFG;
+
+extern tBTE_APPL_CFG bte_appl_cfg;
+
+typedef struct {
+    pthread_mutex_t     mutex;  /* mutex to protect below signal condition */
+    pthread_cond_t      cond;   /* signal event */
+} tBTAPP_SEMAPHORE;
+
+/* helper functions to handle pthread conditions event from outside GKI */
+extern void bte_create_semaphore( tBTAPP_SEMAPHORE * p_sema );
+extern void bte_wait_semaphore( tBTAPP_SEMAPHORE * p_sema, unsigned msecs_to );
+extern void bte_signal_semaphore( tBTAPP_SEMAPHORE * p_sema );
+extern void bte_destroy_semaphore( tBTAPP_SEMAPHORE * p_sema );
+
+/* global application control block storing global application states and variables */
+typedef struct tBTE_APPL_CB_tag {
+    sigset_t            signal_handler_set;        /* signal handler set used by signal handler thread */
+#if ( TRUE == BTE_RESET_BAUD_ON_BT_DISABLE )
+    tBTAPP_SEMAPHORE    shutdown_semaphore;   /* used to sync with  terminate handler initated ops */
+#endif
+    BOOLEAN amp_enabled;                        /* TRUE if AMP is in use */
+} tBTE_APPL_CB;
+
+extern tBTE_APPL_CB bte_appl_cb;
+
+/* Exports the application task */
+extern void BTE_appl_task(UINT32 params);
+extern int BTAPP_enable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM );
+extern int BTAPP_disable_bta( const UINT32 bta_module_state[BTAPP_NUM_ID_BLOCKS], int includingFM );
+
+extern UINT8 appl_trace_level;
+#define BT_PCM_CLK_IDX 1
+#ifndef BT_PCM_DEF_CLK
+#define BT_PCM_DEF_CLK 4       /* defaults to 2048khz PCM clk */
+#endif
+#define BT_PCM_SYNC_MS_ROLE_IDX 3
+#define BT_PCM_CLK_MS_ROLE_IDX  4
+#ifndef BT_PCM_DEF_ROLE
+#define BT_PCM_DEF_ROLE    0x00     /* assume slave as default */
+#endif
+
+/* helper macros to set, clear and get current BTA module id in a 32bit ARRAY!! */
+/* set bit id to 1 in UINT32 a[] NO RANGE CHECK!*/
+#define BTAPP_SET_BTA_MOD(id, a)    { a[id/32] |= (UINT32)(1<<(id % 32)); }
+
+/* set bit id to 0 (cleared) in UINT32 a[] NO RANGE CHECK */
+#define BTAPP_CLEAR_BTA_MOD(id, a)  { a[id/32] &= (UINT32)!(1<<(id % 32)); }
+
+/* tests if bit id is 1 in UINT32 a[] NO RANGE CHECK */
+#define BTAPP_BTA_MOD_IS_SET(id, a) (a[id/32] & (UINT32)(1<<(id % 32)))
+
+/* update this list either via btld.txt or directly here by adding the new profiles as per bta_sys.h.
+ * each xxx_LISTx may only contain 32 bits */
+#ifndef BTAPP_BTA_MODULES_LIST0
+#define BTAPP_BTA_MODULES_LIST0 (\
+        ( 1<<BTA_ID_DM ) | \
+        ( 1<<BTA_ID_DG ) | \
+        ( 1<<BTA_ID_AG ) | \
+        ( 1<<BTA_ID_OPC )| \
+        ( 1<<BTA_ID_OPS )| \
+        ( 1<<BTA_ID_FTS )| \
+        ( 1<<BTA_ID_PAN )| \
+        ( 1<<BTA_ID_PR ) | \
+        ( 1<<BTA_ID_SC)  | \
+        ( 1<<BTA_ID_AV ) | \
+        ( 1<<BTA_ID_HH ) | \
+        ( 1<<BTA_ID_PBS) | \
+        ( 1<<BTA_ID_FMTX)| \
+        ( 1<<BTA_ID_JV) | \
+        ( 1<<BTA_ID_MSE) \
+        )
+#endif
+
+#define BTAPP_LIST1_BLOCK 32    /* next 32 bit block */
+#ifndef BTAPP_BTA_MODULES_LIST1
+#define BTAPP_BTA_MODULES_LIST1 (\
+        ( 1<<(BTA_ID_MAX-BTAPP_LIST1_BLOCK) ) | \
+        ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) | \
+        0 \
+        )
+#endif
+/* for future GPS etc support. goes int LIST1 above */
+#if 0
+    ( 1<<(BTA_ID_SSR-BTAPP_LIST1_BLOCK) ) \
+    ( 1<<(BTA_ID_MSE-BTAPP_LIST1_BLOCK) ) \
+    ( 1<<(BTA_ID_MCE-BTAPP_LIST1_BLOCK) )
+#endif
+
+/* used application init default in bte_main.c, bte_appl_cfg */
+#ifndef BTAPP_DEFAULT_MODULES
+#if (1==BTAPP_NUM_ID_BLOCKS)
+#define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0} /* max 32 modules IDs */
+#elif (2==BTAPP_NUM_ID_BLOCKS)
+#define BTAPP_DEFAULT_MODULES {BTAPP_BTA_MODULES_LIST0, BTAPP_BTA_MODULES_LIST1} /* 64 module IDs max */
+#else
+#error "Define more BTAPP_BTA_MODULES_LISTx"
+#endif
+#endif
+
+#endif  /* BTE_APPL_H */
diff --git a/include/gki_target.h b/include/gki_target.h
new file mode 100644
index 0000000..d2a4c48
--- /dev/null
+++ b/include/gki_target.h
@@ -0,0 +1,433 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GKI_TARGET_H
+#define GKI_TARGET_H
+
+/* Operating System Selection */
+#ifndef BTE_SIM_APP
+#define _GKI_ARM
+#define _GKI_STANDALONE
+#else
+#define _BT_WIN32
+#endif
+
+/* define prefix for exporting APIs from libraries */
+#define EXPORT_API
+
+#ifndef BTE_BSE_WRAPPER
+#ifdef  BTE_SIM_APP
+#undef  EXPORT_API
+#define EXPORT_API  __declspec(dllexport)
+#endif
+#endif
+
+#define GKI_API EXPORT_API
+#define UDRV_API EXPORT_API
+
+#ifndef GKI_DEBUG
+#define GKI_DEBUG FALSE
+#endif
+
+
+#if defined (GKI_DEBUG) && (GKI_DEBUG == TRUE)
+#define GKI_TRACE(fmt, ...)     ALOGI ("%s: " fmt, __FUNCTION__, ## __VA_ARGS__)
+#else
+#define GKI_TRACE(fmt, ...)
+#endif
+
+/******************************************************************************
+**
+** Task configuration
+**
+******************************************************************************/
+
+/* Definitions of task IDs for inter-task messaging */
+#ifndef BTU_TASK
+#define BTU_TASK                0
+#endif
+
+#ifndef BTIF_TASK
+#define BTIF_TASK               1
+#endif
+
+#ifndef A2DP_MEDIA_TASK
+#define A2DP_MEDIA_TASK         2
+#endif
+
+/* The number of GKI tasks in the software system. */
+#ifndef GKI_MAX_TASKS
+#define GKI_MAX_TASKS               3
+#endif
+
+/******************************************************************************
+**
+** Timer configuration
+**
+******************************************************************************/
+
+/* The number of GKI timers in the software system. */
+#ifndef GKI_NUM_TIMERS
+#define GKI_NUM_TIMERS              3
+#endif
+
+/* A conversion value for translating ticks to calculate GKI timer.  */
+#ifndef TICKS_PER_SEC
+#define TICKS_PER_SEC               100
+#endif
+
+/************************************************************************
+**  Utility macros converting ticks to time with user define OS ticks per sec
+**/
+#ifndef GKI_MS_TO_TICKS
+#define GKI_MS_TO_TICKS(x)   ((x) / (1000 / TICKS_PER_SEC))
+#endif
+
+#ifndef GKI_SECS_TO_TICKS
+#define GKI_SECS_TO_TICKS(x)   ((x) * (TICKS_PER_SEC))
+#endif
+
+#ifndef GKI_TICKS_TO_MS
+#define GKI_TICKS_TO_MS(x)   ((x) * 1000 / TICKS_PER_SEC)
+#endif
+
+#ifndef GKI_TICKS_TO_SECS
+#define GKI_TICKS_TO_SECS(x)   ((x) / TICKS_PER_SEC)
+#endif
+
+
+
+/* TICK per second from OS (OS dependent change this macro accordingly to various OS) */
+#ifndef OS_TICKS_PER_SEC
+#define OS_TICKS_PER_SEC               1000
+#endif
+
+/************************************************************************
+**  Utility macros converting ticks to time with user define OS ticks per sec
+**/
+
+#ifndef GKI_OS_TICKS_TO_MS
+#define GKI_OS_TICKS_TO_MS(x)   ((x) * 1000 / OS_TICKS_PER_SEC)
+#endif
+
+
+#ifndef GKI_OS_TICKS_TO_SECS
+#define GKI_OS_TICKS_TO_SECS(x)   ((x) / OS_TICKS_PER_SEC))
+#endif
+
+
+/* delay in ticks before stopping system tick. */
+#ifndef GKI_DELAY_STOP_SYS_TICK
+#define GKI_DELAY_STOP_SYS_TICK     10
+#endif
+
+/* Option to guarantee no preemption during timer expiration (most system don't need this) */
+#ifndef GKI_TIMER_LIST_NOPREEMPT
+#define GKI_TIMER_LIST_NOPREEMPT    FALSE
+#endif
+
+/******************************************************************************
+**
+** Buffer configuration
+**
+******************************************************************************/
+
+/* TRUE if GKI uses dynamic buffers. */
+#ifndef GKI_USE_DYNAMIC_BUFFERS
+#define GKI_USE_DYNAMIC_BUFFERS     FALSE
+#endif
+
+/* The size of the buffers in pool 0. */
+#ifndef GKI_BUF0_SIZE
+#define GKI_BUF0_SIZE               64
+#endif
+
+/* The number of buffers in buffer pool 0. */
+#ifndef GKI_BUF0_MAX
+#define GKI_BUF0_MAX                48
+#endif
+
+/* The ID of buffer pool 0. */
+#ifndef GKI_POOL_ID_0
+#define GKI_POOL_ID_0               0
+#endif
+
+/* The size of the buffers in pool 1. */
+#ifndef GKI_BUF1_SIZE
+#define GKI_BUF1_SIZE               288
+#endif
+
+/* The number of buffers in buffer pool 1. */
+#ifndef GKI_BUF1_MAX
+#define GKI_BUF1_MAX                26
+#endif
+
+/* The ID of buffer pool 1. */
+#ifndef GKI_POOL_ID_1
+#define GKI_POOL_ID_1               1
+#endif
+
+/* The size of the buffers in pool 2. */
+#ifndef GKI_BUF2_SIZE
+#define GKI_BUF2_SIZE               660
+#endif
+
+/* The number of buffers in buffer pool 2. */
+#ifndef GKI_BUF2_MAX
+#define GKI_BUF2_MAX                45
+#endif
+
+/* The ID of buffer pool 2. */
+#ifndef GKI_POOL_ID_2
+#define GKI_POOL_ID_2               2
+#endif
+
+/* The size of the buffers in pool 3. */
+#ifndef GKI_BUF3_SIZE
+#define GKI_BUF3_SIZE               (4096+16)
+#endif
+
+/* The number of buffers in buffer pool 3. */
+#ifndef GKI_BUF3_MAX
+#define GKI_BUF3_MAX                200
+#endif
+
+/* The ID of buffer pool 3. */
+#ifndef GKI_POOL_ID_3
+#define GKI_POOL_ID_3               3
+#endif
+
+/* The size of the largest PUBLIC fixed buffer in system. */
+#ifndef GKI_MAX_BUF_SIZE
+#define GKI_MAX_BUF_SIZE            GKI_BUF3_SIZE
+#endif
+
+/* The pool ID of the largest PUBLIC fixed buffer in system. */
+#ifndef GKI_MAX_BUF_SIZE_POOL_ID
+#define GKI_MAX_BUF_SIZE_POOL_ID    GKI_POOL_ID_3
+#endif
+
+/* RESERVED buffer pool for OBX */
+/* Ideally there should be 1 buffer for each instance for RX data, and some number
+of TX buffers based on active instances. OBX will only use these if packet size
+requires it. In most cases the large packets are used in only one direction so
+the other direction will use smaller buffers.
+Devices with small amount of RAM should limit the number of active obex objects.
+*/
+/* The size of the buffers in pool 4. */
+#ifndef GKI_BUF4_SIZE
+#define GKI_BUF4_SIZE               (8080+26)
+#endif
+
+/* The number of buffers in buffer pool 4. */
+#ifndef GKI_BUF4_MAX
+#define GKI_BUF4_MAX                (OBX_NUM_SERVERS + OBX_NUM_CLIENTS)
+#endif
+
+/* The ID of buffer pool 4. */
+#ifndef GKI_POOL_ID_4
+#define GKI_POOL_ID_4               4
+#endif
+
+/* The number of fixed GKI buffer pools.
+eL2CAP requires Pool ID 5
+If BTM_SCO_HCI_INCLUDED is FALSE, Pool ID 6 is unnecessary, otherwise set to 7
+If BTA_HL_INCLUDED is FALSE then Pool ID 7 is uncessary and set the following to 7, otherwise set to 8
+If BLE_INCLUDED is FALSE then Pool ID 8 is uncessary and set the following to 8, otherwise set to 9
+POOL_ID 9 is a public pool meant for large buffer needs such as SDP_DB
+*/
+// btla-specific ++
+#ifndef GKI_NUM_FIXED_BUF_POOLS
+#define GKI_NUM_FIXED_BUF_POOLS     10
+#endif
+
+/* The buffer pool usage mask. */
+#ifndef GKI_DEF_BUFPOOL_PERM_MASK
+/* Setting POOL_ID 9 as a public pool meant for large buffers such as SDP_DB */
+#define GKI_DEF_BUFPOOL_PERM_MASK   0xfdf0
+#endif
+// btla-specific --
+
+/* The number of fixed and dynamic buffer pools */
+#ifndef GKI_NUM_TOTAL_BUF_POOLS
+#define GKI_NUM_TOTAL_BUF_POOLS     10
+#endif
+
+/* The following is intended to be a reserved pool for L2CAP
+Flow control and retransmissions and intentionally kept out
+of order */
+
+/* The number of buffers in buffer pool 5. */
+#ifndef GKI_BUF5_MAX
+#define GKI_BUF5_MAX                64
+#endif
+
+/* The ID of buffer pool 5. */
+#ifndef GKI_POOL_ID_5
+#define GKI_POOL_ID_5               5
+#endif
+
+/* The size of the buffers in pool 5
+** Special pool used by l2cap retransmissions only.  This size based on segment
+** that will fit into both DH5 and 2-DH3 packet types after accounting for GKI
+** header.  13 bytes of max headers allows us a 339 payload max. (in btui_app.txt)
+** Note: 748 used for insight scriptwrapper with CAT-2 scripts.
+*/
+#ifndef GKI_BUF5_SIZE
+#define GKI_BUF5_SIZE               748
+#endif
+
+/* The buffer corruption check flag. */
+#ifndef GKI_ENABLE_BUF_CORRUPTION_CHECK
+#define GKI_ENABLE_BUF_CORRUPTION_CHECK TRUE
+#endif
+
+/* The GKI severe error macro. */
+#ifndef GKI_SEVERE
+#define GKI_SEVERE(code)
+#endif
+
+/* TRUE if GKI includes debug functionality. */
+#ifndef GKI_DEBUG
+#define GKI_DEBUG                   FALSE
+#endif
+
+/* Maximum number of exceptions logged. */
+#ifndef GKI_MAX_EXCEPTION
+#define GKI_MAX_EXCEPTION           8
+#endif
+
+/* Maximum number of chars stored for each exception message. */
+#ifndef GKI_MAX_EXCEPTION_MSGLEN
+#define GKI_MAX_EXCEPTION_MSGLEN    64
+#endif
+
+#ifndef GKI_SEND_MSG_FROM_ISR
+#define GKI_SEND_MSG_FROM_ISR    FALSE
+#endif
+
+
+/* The following is intended to be a reserved pool for SCO
+over HCI data and intentionally kept out of order */
+
+/* The ID of buffer pool 6. */
+#ifndef GKI_POOL_ID_6
+#define GKI_POOL_ID_6               6
+#endif
+
+/* The size of the buffers in pool 6,
+  BUF_SIZE = max SCO data 255 + sizeof(BT_HDR) = 8 + SCO packet header 3 + padding 2 = 268 */
+#ifndef GKI_BUF6_SIZE
+#define GKI_BUF6_SIZE               268
+#endif
+
+/* The number of buffers in buffer pool 6. */
+#ifndef GKI_BUF6_MAX
+#define GKI_BUF6_MAX                60
+#endif
+
+
+/* The following pool is a dedicated pool for HDP
+   If a shared pool is more desirable then
+   1. set BTA_HL_LRG_DATA_POOL_ID to the desired Gki Pool ID
+   2. make sure that the shared pool size is larger than 9472
+   3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
+      POOL ID 7 is not needed
+*/
+
+/* The ID of buffer pool 7. */
+#ifndef GKI_POOL_ID_7
+#define GKI_POOL_ID_7               7
+#endif
+
+/* The size of the buffers in pool 7 */
+#ifndef GKI_BUF7_SIZE
+#define GKI_BUF7_SIZE               9472
+#endif
+
+/* The number of buffers in buffer pool 7. */
+#ifndef GKI_BUF7_MAX
+#define GKI_BUF7_MAX                2
+#endif
+
+/* The following pool is a dedicated pool for GATT
+   If a shared pool is more desirable then
+   1. set GATT_DB_POOL_ID to the desired Gki Pool ID
+   2. make sure that the shared pool size fit a common GATT database needs
+   3. adjust GKI_NUM_FIXED_BUF_POOLS accordingly since
+      POOL ID 8 is not needed
+*/
+
+/* The ID of buffer pool 8. */
+#ifndef GKI_POOL_ID_8
+#define GKI_POOL_ID_8               8
+#endif
+
+/* The size of the buffers in pool 8 */
+#ifndef GKI_BUF8_SIZE
+#define GKI_BUF8_SIZE               128
+#endif
+
+/* The number of buffers in buffer pool 8. */
+#ifndef GKI_BUF8_MAX
+#define GKI_BUF8_MAX                30
+#endif
+
+// btla-specific ++
+/* The following pool is  meant for large allocations such as SDP_DB */
+#ifndef GKI_POOL_ID_9
+#define GKI_POOL_ID_9              9
+#endif
+
+#ifndef GKI_BUF9_SIZE
+#define GKI_BUF9_SIZE            8192
+#endif
+
+#ifndef GKI_BUF9_MAX
+#define GKI_BUF9_MAX           5
+#endif
+// btla-specific --
+
+/* GKI Trace Macros */
+#define GKI_TRACE_0(m)                          LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m)
+#define GKI_TRACE_1(m,p1)                       LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1)
+#define GKI_TRACE_2(m,p1,p2)                    LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2)
+#define GKI_TRACE_3(m,p1,p2,p3)                 LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3)
+#define GKI_TRACE_4(m,p1,p2,p3,p4)              LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4)
+#define GKI_TRACE_5(m,p1,p2,p3,p4,p5)           LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4,p5)
+#define GKI_TRACE_6(m,p1,p2,p3,p4,p5,p6)        LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_GENERIC,m,p1,p2,p3,p4,p5,p6)
+
+#define GKI_TRACE_ERROR_0(m)                    LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m)
+#define GKI_TRACE_ERROR_1(m,p1)                 LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1)
+#define GKI_TRACE_ERROR_2(m,p1,p2)              LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2)
+#define GKI_TRACE_ERROR_3(m,p1,p2,p3)           LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3)
+#define GKI_TRACE_ERROR_4(m,p1,p2,p3,p4)        LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4)
+#define GKI_TRACE_ERROR_5(m,p1,p2,p3,p4,p5)     LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5)
+#define GKI_TRACE_ERROR_6(m,p1,p2,p3,p4,p5,p6)  LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI | TRACE_TYPE_ERROR,m,p1,p2,p3,p4,p5,p6)
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+EXPORT_API extern void LogMsg (UINT32 trace_set_mask, const char *fmt_str, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* GKI_TARGET_H */
diff --git a/main/Android.mk b/main/Android.mk
new file mode 100644
index 0000000..8ecb3c3
--- /dev/null
+++ b/main/Android.mk
@@ -0,0 +1,129 @@
+LOCAL_PATH:= $(call my-dir)
+
+#
+# Bluetooth HW module
+#
+
+include $(CLEAR_VARS)
+
+# HAL layer
+LOCAL_SRC_FILES:= \
+	../btif/src/bluetooth.c
+
+# platform specific
+LOCAL_SRC_FILES+= \
+	bte_main.c \
+	bte_init.c \
+	bte_version.c \
+	bte_logmsg.c \
+	bte_conf.c
+
+# BTIF
+LOCAL_SRC_FILES += \
+    ../btif/src/btif_core.c \
+    ../btif/src/btif_dm.c \
+    ../btif/src/btif_storage.c \
+    ../btif/src/btif_util.c \
+    ../btif/src/btif_sm.c \
+    ../btif/src/btif_hf.c \
+    ../btif/src/btif_av.c \
+    ../btif/src/btif_rc.c \
+    ../btif/src/btif_media_task.c \
+    ../btif/src/btif_hh.c \
+    ../btif/src/btif_hl.c \
+    ../btif/src/btif_sock.c \
+    ../btif/src/btif_sock_rfc.c \
+    ../btif/src/btif_sock_thread.c \
+    ../btif/src/btif_sock_sdp.c \
+    ../btif/src/btif_sock_util.c \
+    ../btif/src/btif_pan.c \
+    ../btif/src/btif_config.c \
+    ../btif/src/btif_config_util.cpp \
+    ../btif/src/btif_profile_queue.c
+
+# callouts
+LOCAL_SRC_FILES+= \
+    ../btif/co/bta_sys_co.c \
+    ../btif/co/bta_fs_co.c \
+    ../btif/co/bta_ag_co.c \
+    ../btif/co/bta_dm_co.c \
+    ../btif/co/bta_av_co.c \
+    ../btif/co/bta_hh_co.c \
+    ../btif/co/bta_hl_co.c \
+    ../btif/co/bta_pan_co.c
+
+# sbc encoder
+LOCAL_SRC_FILES+= \
+	../embdrv/sbc/encoder/srce/sbc_analysis.c \
+	../embdrv/sbc/encoder/srce/sbc_dct.c \
+	../embdrv/sbc/encoder/srce/sbc_dct_coeffs.c \
+	../embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_mono.c \
+	../embdrv/sbc/encoder/srce/sbc_enc_bit_alloc_ste.c \
+	../embdrv/sbc/encoder/srce/sbc_enc_coeffs.c \
+	../embdrv/sbc/encoder/srce/sbc_encoder.c \
+	../embdrv/sbc/encoder/srce/sbc_packing.c \
+
+LOCAL_SRC_FILES+= \
+	../udrv/ulinux/uipc.c
+
+LOCAL_C_INCLUDES+= . \
+	$(LOCAL_PATH)/../bta/include \
+	$(LOCAL_PATH)/../bta/sys \
+	$(LOCAL_PATH)/../bta/dm \
+	$(LOCAL_PATH)/../gki/common \
+	$(LOCAL_PATH)/../gki/ulinux \
+	$(LOCAL_PATH)/../include \
+	$(LOCAL_PATH)/../stack/include \
+	$(LOCAL_PATH)/../stack/l2cap \
+	$(LOCAL_PATH)/../stack/a2dp \
+	$(LOCAL_PATH)/../stack/btm \
+	$(LOCAL_PATH)/../stack/avdt \
+	$(LOCAL_PATH)/../hcis \
+	$(LOCAL_PATH)/../hcis/include \
+	$(LOCAL_PATH)/../hcis/patchram \
+	$(LOCAL_PATH)/../udrv/include \
+	$(LOCAL_PATH)/../btif/include \
+	$(LOCAL_PATH)/../btif/co \
+	$(LOCAL_PATH)/../hci/include\
+	$(LOCAL_PATH)/../brcm/include \
+	$(LOCAL_PATH)/../embdrv/sbc/encoder/include \
+	$(LOCAL_PATH)/../audio_a2dp_hw \
+	$(LOCAL_PATH)/../utils/include \
+	$(bdroid_C_INCLUDES) \
+	external/tinyxml2
+
+LOCAL_CFLAGS += -DBUILDCFG $(bdroid_CFLAGS) -Werror -Wno-error=maybe-uninitialized -Wno-error=uninitialized
+
+ifeq ($(TARGET_PRODUCT), full_crespo)
+     LOCAL_CFLAGS += -DTARGET_CRESPO
+endif
+ifeq ($(TARGET_PRODUCT), full_crespo4g)
+     LOCAL_CFLAGS += -DTARGET_CRESPO
+endif
+ifeq ($(TARGET_PRODUCT), full_maguro)
+     LOCAL_CFLAGS += -DTARGET_MAGURO
+endif
+
+# Fix this
+#ifeq ($(TARGET_VARIANT), eng)
+#     LOCAL_CFLAGS += -O2 # and other production release flags
+#else
+#     LOCAL_CFLAGS +=
+#endif
+
+LOCAL_SHARED_LIBRARIES := \
+    libcutils \
+    libpower \
+    libbt-hci \
+    libbt-utils
+
+#LOCAL_WHOLE_STATIC_LIBRARIES := libbt-brcm_gki libbt-brcm_stack libbt-brcm_bta
+LOCAL_STATIC_LIBRARIES := libbt-brcm_gki libbt-brcm_bta libbt-brcm_stack libtinyxml2
+
+LOCAL_MODULE := bluetooth.default
+LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/hw
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+LOCAL_REQUIRED_MODULES := libbt-hci libbt-vendor bt_stack.conf bt_did.conf auto_pair_devlist.conf
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/main/bte_conf.c b/main/bte_conf.c
new file mode 100644
index 0000000..e001d59
--- /dev/null
+++ b/main/bte_conf.c
@@ -0,0 +1,449 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      bte_conf.c
+ *
+ *  Description:   Contains functions to conduct run-time module configuration
+ *                 based on entries present in the .conf file
+ *
+ ******************************************************************************/
+
+#define LOG_TAG "bte_conf"
+
+#include <utils/Log.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+
+#include "bt_target.h"
+#include "bta_api.h"
+
+/******************************************************************************
+**  Externs
+******************************************************************************/
+extern BOOLEAN hci_logging_enabled;
+extern char hci_logfile[256];
+extern BOOLEAN trace_conf_enabled;
+void bte_trace_conf(char *p_name, char *p_conf_value);
+int device_name_cfg(char *p_conf_name, char *p_conf_value);
+int device_class_cfg(char *p_conf_name, char *p_conf_value);
+int logging_cfg_onoff(char *p_conf_name, char *p_conf_value);
+int logging_set_filepath(char *p_conf_name, char *p_conf_value);
+int trace_cfg_onoff(char *p_conf_name, char *p_conf_value);
+
+BD_NAME local_device_default_name = BTM_DEF_LOCAL_NAME;
+DEV_CLASS local_device_default_class = {0x40, 0x02, 0x0C};
+
+/******************************************************************************
+**  Local type definitions
+******************************************************************************/
+#define CONF_DBG          0
+#define info(format, ...) ALOGI (format, ## __VA_ARGS__)
+#define debug(format, ...) if (CONF_DBG) ALOGD (format, ## __VA_ARGS__)
+#define error(format, ...) ALOGE (format, ## __VA_ARGS__)
+
+#define CONF_KEY_LEN   32
+#define CONF_VALUE_LEN 96
+
+#define CONF_COMMENT '#'
+#define CONF_DELIMITERS " =\n\r\t"
+#define CONF_VALUES_DELIMITERS "\"=\n\r\t"
+#define CONF_COD_DELIMITERS " {,}\t"
+#define CONF_MAX_LINE_LEN 255
+
+typedef int (conf_action_t)(char *p_conf_name, char *p_conf_value);
+
+typedef struct {
+    const char *conf_entry;
+    conf_action_t *p_action;
+} conf_entry_t;
+
+typedef struct {
+    char key[CONF_KEY_LEN];
+    char value[CONF_VALUE_LEN];
+} tKEY_VALUE_PAIRS;
+
+enum {
+    CONF_DID,
+    CONF_DID_RECORD_NUM,
+    CONF_DID_PRIMARY_RECORD,
+    CONF_DID_VENDOR_ID,
+    CONF_DID_VENDOR_ID_SOURCE,
+    CONF_DID_PRODUCT_ID,
+    CONF_DID_VERSION,
+    CONF_DID_CLIENT_EXECUTABLE_URL,
+    CONF_DID_SERVICE_DESCRIPTION,
+    CONF_DID_DOCUMENTATION_URL,
+    CONF_DID_MAX
+};
+typedef UINT8 tCONF_DID;
+/******************************************************************************
+**  Static variables
+******************************************************************************/
+
+/*
+ * Current supported entries and corresponding action functions
+ */
+/* TODO: Name and Class are duplicated with NVRAM adapter_info. Need to be sorted out */
+static const conf_entry_t conf_table[] = {
+    /*{"Name", device_name_cfg},
+    {"Class", device_class_cfg},*/
+    {"BtSnoopLogOutput", logging_cfg_onoff},
+    {"BtSnoopFileName", logging_set_filepath},
+    {"TraceConf", trace_cfg_onoff},
+    {(const char *) NULL, NULL}
+};
+
+static tKEY_VALUE_PAIRS did_conf_pairs[CONF_DID_MAX] = {
+    { "[DID]",               "" },
+    { "recordNumber",        "" },
+    { "primaryRecord",       "" },
+    { "vendorId",            "" },
+    { "vendorIdSource",      "" },
+    { "productId",           "" },
+    { "version",             "" },
+    { "clientExecutableURL", "" },
+    { "serviceDescription",  "" },
+    { "documentationURL",    "" },
+};
+/*****************************************************************************
+**   FUNCTIONS
+*****************************************************************************/
+
+int device_name_cfg(char *p_conf_name, char *p_conf_value)
+{
+    strcpy((char *)local_device_default_name, p_conf_value);
+    return 0;
+}
+
+int device_class_cfg(char *p_conf_name, char *p_conf_value)
+{
+    char *p_token;
+    unsigned int x;
+
+    p_token = strtok(p_conf_value, CONF_COD_DELIMITERS);
+    sscanf(p_token, "%x", &x);
+    local_device_default_class[0] = (UINT8) x;
+    p_token = strtok(NULL, CONF_COD_DELIMITERS);
+    sscanf(p_token, "%x", &x);
+    local_device_default_class[1] = (UINT8) x;
+    p_token = strtok(NULL, CONF_COD_DELIMITERS);
+    sscanf(p_token, "%x", &x);
+    local_device_default_class[2] = (UINT8) x;
+
+    return 0;
+}
+
+int logging_cfg_onoff(char *p_conf_name, char *p_conf_value)
+{
+    if (strcmp(p_conf_value, "true") == 0)
+        hci_logging_enabled = TRUE;
+    else
+        hci_logging_enabled = FALSE;
+    return 0;
+}
+
+int logging_set_filepath(char *p_conf_name, char *p_conf_value)
+{
+    strcpy(hci_logfile, p_conf_value);
+    return 0;
+}
+
+int trace_cfg_onoff(char *p_conf_name, char *p_conf_value)
+{
+    trace_conf_enabled = (strcmp(p_conf_value, "true") == 0) ? TRUE : FALSE;
+    return 0;
+}
+
+/*****************************************************************************
+**   CONF INTERFACE FUNCTIONS
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function        bte_load_conf
+**
+** Description     Read conf entry from p_path file one by one and call
+**                 the corresponding config function
+**
+** Returns         None
+**
+*******************************************************************************/
+void bte_load_conf(const char *p_path)
+{
+    FILE    *p_file;
+    char    *p_name;
+    char    *p_value;
+    conf_entry_t    *p_entry;
+    char    line[CONF_MAX_LINE_LEN+1]; /* add 1 for \0 char */
+    BOOLEAN name_matched;
+
+    ALOGI("Attempt to load stack conf from %s", p_path);
+
+    if ((p_file = fopen(p_path, "r")) != NULL)
+    {
+        /* read line by line */
+        while (fgets(line, CONF_MAX_LINE_LEN+1, p_file) != NULL)
+        {
+            if (line[0] == CONF_COMMENT)
+                continue;
+
+            p_name = strtok(line, CONF_DELIMITERS);
+
+            if (NULL == p_name)
+            {
+                continue;
+            }
+
+            p_value = strtok(NULL, CONF_VALUES_DELIMITERS);
+
+            if (NULL == p_value)
+            {
+                ALOGW("bte_load_conf: missing value for name: %s", p_name);
+                continue;
+            }
+
+            name_matched = FALSE;
+            p_entry = (conf_entry_t *)conf_table;
+
+            while (p_entry->conf_entry != NULL)
+            {
+                if (strcmp(p_entry->conf_entry, (const char *)p_name) == 0)
+                {
+                    name_matched = TRUE;
+                    if (p_entry->p_action != NULL)
+                        p_entry->p_action(p_name, p_value);
+                    break;
+                }
+
+                p_entry++;
+            }
+
+            if ((name_matched == FALSE) && (trace_conf_enabled == TRUE))
+            {
+                /* Check if this is a TRC config item */
+                bte_trace_conf(p_name, p_value);
+            }
+        }
+
+        fclose(p_file);
+    }
+    else
+    {
+        ALOGI( "bte_load_conf file >%s< not found", p_path);
+    }
+}
+
+/*******************************************************************************
+**
+** Function        bte_parse_did_conf
+**
+** Description     Read conf entry from p_path file one by one and get
+**                 the corresponding config value
+**
+** Returns         TRUE if success, else FALSE
+**
+*******************************************************************************/
+static BOOLEAN bte_parse_did_conf (const char *p_path, UINT32 num,
+    tKEY_VALUE_PAIRS *conf_pairs, UINT32 conf_pairs_num)
+{
+    UINT32 i, param_num=0, count=0, start_count=0, end_count=0, conf_num=0;
+    BOOLEAN key=TRUE, conf_found=FALSE;
+
+    FILE    *p_file;
+    char    *p;
+    char    line[CONF_MAX_LINE_LEN+1]; /* add 1 for \0 char */
+
+    ALOGI("Attempt to load did conf from %s", p_path);
+
+    if ((p_file = fopen(p_path, "r")) != NULL)
+    {
+        /* read line by line */
+        while (fgets(line, CONF_MAX_LINE_LEN+1, p_file) != NULL)
+        {
+            count++;
+            if (line[0] == CONF_COMMENT)
+                continue;
+
+            if (conf_found && (conf_num == num) && (*line == '[')) {
+                conf_found = FALSE;
+                end_count = count-1;
+                break;
+            }
+
+            p = strtok(line, CONF_DELIMITERS);
+            while (p != NULL) {
+                if (conf_num <= num) {
+                    if (key) {
+                        if (!strcmp(p, conf_pairs[0].key)) {
+                            if (++conf_num == num) {
+                                conf_found = TRUE;
+                                start_count = count;
+                                strncpy(conf_pairs[0].value, "1", CONF_VALUE_LEN);
+                            }
+                        } else {
+                            if (conf_num == num) {
+                                for (i=1; i<conf_pairs_num; i++) {
+                                    if (!strcmp(p, conf_pairs[i].key)) {
+                                        param_num = i;
+                                        break;
+                                    }
+                                }
+                                if (i == conf_pairs_num) {
+                                    error("Attribute %s does not belong to %s configuration",
+                                        p, conf_pairs[0].key);
+                                    fclose(p_file);
+                                    return FALSE;
+                                }
+                            }
+                            key = FALSE;
+                        }
+                    } else {
+                        if ((conf_num == num) && param_num) {
+                            strncpy(conf_pairs[param_num].value, p, CONF_VALUE_LEN-1);
+                            param_num = 0;
+                        }
+                        key = TRUE;
+                    }
+                }
+                p = strtok(NULL, CONF_DELIMITERS);
+            }
+        }
+
+        fclose(p_file);
+   }
+   else
+   {
+        ALOGI( "bte_parse_did_conf file >%s< not found", p_path);
+   }
+   if (!end_count)
+       end_count = count;
+
+   if (start_count) {
+        debug("Read %s configuration #%u from lines %u to %u in file %s",
+            conf_pairs[0].key, (unsigned int)num, (unsigned int)start_count,
+            (unsigned int)end_count, p_path);
+        return TRUE;
+   }
+
+   error("%s configuration not found in file %s", conf_pairs[0].key, p_path);
+        return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function        bte_load_did_conf
+**
+** Description     Set local Device ID records, reading from configuration files
+**
+** Returns         None
+**
+*******************************************************************************/
+
+void bte_load_did_conf (const char *p_path)
+{
+    tBTA_DI_RECORD rec;
+    UINT32 rec_num, i, j;
+
+    for (i=1; i<=BTA_DI_NUM_MAX; i++) {
+        for (j=0; j<CONF_DID_MAX; j++) {
+            *did_conf_pairs[j].value = 0;
+        }
+
+        if (bte_parse_did_conf(p_path, i, did_conf_pairs, CONF_DID_MAX)) {
+            memset(&rec, 0, sizeof(rec));
+
+            if (*did_conf_pairs[CONF_DID_RECORD_NUM].value) {
+                rec_num = (UINT32)(strtoul(did_conf_pairs[CONF_DID_RECORD_NUM].value, NULL, 0)-1);
+            } else {
+                debug("[%d] Unknown %s", (unsigned int)i, did_conf_pairs[CONF_DID_RECORD_NUM].key);
+                continue;
+            }
+
+            if (*did_conf_pairs[CONF_DID_VENDOR_ID].value) {
+                rec.vendor = (UINT16)strtoul(did_conf_pairs[CONF_DID_VENDOR_ID].value, NULL, 0);
+            } else {
+                rec.vendor = LMP_COMPID_BROADCOM;
+            }
+
+            if (*did_conf_pairs[CONF_DID_VENDOR_ID_SOURCE].value) {
+                rec.vendor_id_source = (UINT16)strtoul(did_conf_pairs[CONF_DID_VENDOR_ID_SOURCE].value, NULL, 0);
+            } else {
+                rec.vendor_id_source = DI_VENDOR_ID_SOURCE_BTSIG;
+            }
+
+            if ((*did_conf_pairs[CONF_DID].value == 0) ||
+                (rec_num >= BTA_DI_NUM_MAX) ||
+                (!((rec.vendor_id_source >= DI_VENDOR_ID_SOURCE_BTSIG) &&
+                   (rec.vendor_id_source <= DI_VENDOR_ID_SOURCE_USBIF))) ||
+                (rec.vendor == DI_VENDOR_ID_DEFAULT)) {
+
+                error("DID record #%u not set", (unsigned int)i);
+                for (j=0; j<CONF_DID_MAX; j++) {
+                    error("%s:%s", did_conf_pairs[j].key, did_conf_pairs[j].value);
+                }
+                continue;
+            }
+
+            rec.product = (UINT16)strtoul(did_conf_pairs[CONF_DID_PRODUCT_ID].value, NULL, 0);
+            rec.version = (UINT16)strtoul(did_conf_pairs[CONF_DID_VERSION].value, NULL, 0);
+
+            strncpy(rec.client_executable_url,
+                did_conf_pairs[CONF_DID_CLIENT_EXECUTABLE_URL].value,
+                SDP_MAX_ATTR_LEN);
+            strncpy(rec.service_description,
+                did_conf_pairs[CONF_DID_SERVICE_DESCRIPTION].value,
+                SDP_MAX_ATTR_LEN);
+            strncpy(rec.documentation_url,
+                did_conf_pairs[CONF_DID_DOCUMENTATION_URL].value,
+                SDP_MAX_ATTR_LEN);
+
+            for (j=0; j<strlen(did_conf_pairs[CONF_DID_PRIMARY_RECORD].value); j++) {
+                did_conf_pairs[CONF_DID_PRIMARY_RECORD].value[j] =
+                    tolower(did_conf_pairs[CONF_DID_PRIMARY_RECORD].value[j]);
+            }
+            if ((!strcmp(did_conf_pairs[CONF_DID_PRIMARY_RECORD].value, "true")) ||
+                (!strcmp(did_conf_pairs[CONF_DID_PRIMARY_RECORD].value, "1"))) {
+                rec.primary_record = TRUE;
+            } else {
+                rec.primary_record = FALSE;
+            }
+
+            info("[%u] primary_record=%d vendor_id=0x%04X vendor_id_source=0x%04X product_id=0x%04X version=0x%04X",
+                (unsigned int)rec_num+1, rec.primary_record, rec.vendor,
+                rec.vendor_id_source, rec.product, rec.version);
+            if (*rec.client_executable_url) {
+                info(" client_executable_url=%s", rec.client_executable_url);
+            }
+            if (*rec.service_description) {
+                info(" service_description=%s", rec.service_description);
+            }
+            if (*rec.documentation_url) {
+                info(" documentation_url=%s", rec.documentation_url);
+            }
+
+            if (BTA_DmSetLocalDiRecord(&rec, &rec_num) != BTA_SUCCESS) {
+                error("SetLocalDiInfo failed for #%u!", (unsigned int)i);
+            }
+        }
+    }
+}
+
diff --git a/main/bte_init.c b/main/bte_init.c
new file mode 100644
index 0000000..b189281
--- /dev/null
+++ b/main/bte_init.c
@@ -0,0 +1,521 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the routines that initialize the stack components. 
+ *  It must be called before the BTU task is started.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include <string.h>
+
+#ifndef BTA_INCLUDED
+#define BTA_INCLUDED FALSE
+#endif
+
+/* Include initialization functions definitions */
+#if (defined(RFCOMM_INCLUDED) && RFCOMM_INCLUDED == TRUE)
+#include "port_api.h"
+#endif
+
+#if (defined(TCS_INCLUDED) && TCS_INCLUDED == TRUE)
+#include "tcs_api.h"
+#endif
+
+#if (defined(OBX_INCLUDED) && OBX_INCLUDED == TRUE)
+#include "obx_api.h"
+#endif
+
+#if (defined(BNEP_INCLUDED) && BNEP_INCLUDED == TRUE)
+#include "bnep_api.h"
+#endif
+
+#if (defined(GAP_INCLUDED) && GAP_INCLUDED == TRUE)
+#include "gap_api.h"
+#endif
+
+#if ((defined(CTP_INCLUDED) && CTP_INCLUDED == TRUE))
+#include "ctp_api.h"
+#endif
+
+#if ((defined(ICP_INCLUDED) && ICP_INCLUDED == TRUE))
+#include "icp_api.h"
+#endif
+
+#if (defined(SPP_INCLUDED) && SPP_INCLUDED == TRUE)
+#include "spp_api.h"
+#endif
+
+#if (defined(DUN_INCLUDED) && DUN_INCLUDED == TRUE)
+#include "dun_api.h"
+#endif
+
+#if (defined(GOEP_INCLUDED) &&  GOEP_INCLUDED == TRUE)
+#include "goep_util.h"
+#endif /* GOEP included */
+
+#if (defined(FTP_INCLUDED) && FTP_INCLUDED == TRUE)
+#include "ftp_api.h"
+#endif /* FTP */
+
+#if (defined(OPP_INCLUDED) && OPP_INCLUDED == TRUE)
+#include "opp_api.h"
+#endif /* OPP */
+
+#if (defined(BIP_INCLUDED) && BIP_INCLUDED == TRUE)
+#include "bip_api.h"
+#endif
+
+#if (defined(BTU_BTA_INCLUDED) && BTU_BTA_INCLUDED == TRUE)
+#if (defined(BTA_BI_INCLUDED) && BTA_BI_INCLUDED == TRUE)
+#include "bta_bi_api.h"
+#endif
+#endif
+
+#if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE)
+#include "hfp_api.h"
+#endif
+
+#if ((defined(HSP2_INCLUDED) && HSP2_INCLUDED == TRUE)) || \
+    ((defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE))
+#include "hsp2_api.h"
+#endif
+
+#if (defined(HCRP_INCLUDED) && HCRP_INCLUDED == TRUE)
+#if (defined(HCRP_CLIENT_INCLUDED) && HCRP_CLIENT_INCLUDED == TRUE)
+#include "hcrp_api.h"
+#endif
+#if (defined(HCRP_SERVER_INCLUDED) && HCRP_SERVER_INCLUDED == TRUE)
+#include "hcrpm_api.h"
+#endif
+#endif
+
+#if (defined(BPP_INCLUDED) && BPP_INCLUDED == TRUE)
+#include "bpp_api.h"
+#endif
+
+#if (defined(PAN_INCLUDED) && PAN_INCLUDED == TRUE)
+#include "pan_api.h"
+#endif
+
+#if (defined(AVRC_INCLUDED) && AVRC_INCLUDED == TRUE)
+#include "avrc_api.h"
+#endif
+
+#if (defined(A2D_INCLUDED) && A2D_INCLUDED == TRUE)
+#include "a2d_api.h"
+#endif
+
+
+#if (defined(HID_DEV_INCLUDED) && HID_DEV_INCLUDED == TRUE)
+#include "hidd_api.h"
+#endif
+
+#if (defined(HID_HOST_INCLUDED) && HID_HOST_INCLUDED == TRUE)
+#include "hidh_api.h"
+#endif
+
+#if (defined(SAP_SERVER_INCLUDED) && SAP_SERVER_INCLUDED == TRUE)
+#include "sap_api.h"
+#endif  /* SAP_SERVER_INCLUDED */
+
+#if (defined(MCA_INCLUDED) && MCA_INCLUDED == TRUE)
+#include "mca_api.h"
+#endif
+
+#if (defined(BLE_INCLUDED) && BLE_INCLUDED == TRUE)
+#include "gatt_api.h"
+#if (defined(SMP_INCLUDED) && SMP_INCLUDED == TRUE)
+#include "smp_api.h"
+#endif
+#endif
+
+// btla-specific ++
+/***** BTA Modules ******/
+#if BTA_INCLUDED == TRUE && BTA_DYNAMIC_MEMORY == TRUE
+#include "bta_api.h"
+#include "bta_sys.h"
+
+#if BTA_AC_INCLUDED == TRUE
+#include "bta_acs_int.h"
+#include "bta_acc_int.h"
+#endif
+
+#if BTA_AG_INCLUDED == TRUE
+#include "bta_ag_int.h"
+#endif
+
+#if BTA_HS_INCLUDED == TRUE
+#include "bta_hs_int.h"
+#endif
+
+#include "bta_dm_int.h"
+
+#if BTA_DG_INCLUDED == TRUE
+#include "bta_dg_api.h"
+#include "bta_dg_int.h"
+#endif
+
+#if BTA_FT_INCLUDED == TRUE
+#include "bta_ftc_int.h"
+#include "bta_fts_int.h"
+#endif
+
+#if BTA_PBC_INCLUDED == TRUE
+#include "bta_pbc_int.h"
+#endif
+
+#if BTA_PBS_INCLUDED == TRUE
+#include "bta_pbs_int.h"
+#endif
+
+#if BTA_OP_INCLUDED == TRUE
+#include "bta_opc_int.h"
+#include "bta_ops_int.h"
+#endif
+
+#if BTA_SS_INCLUDED==TRUE
+#include "bta_ss_int.h"
+#endif
+
+#if BTA_CT_INCLUDED==TRUE
+#include "bta_ct_int.h"
+#endif
+
+#if BTA_CG_INCLUDED==TRUE
+#include "bta_cg_int.h"
+#endif
+
+#if BTA_BI_INCLUDED==TRUE
+#include "bta_bic_int.h"
+#include "bta_bis_int.h"
+#endif
+
+#if BTA_PR_INCLUDED==TRUE
+#include "bta_pr_int.h"
+#endif
+
+#if BTA_AR_INCLUDED==TRUE
+#include "bta_ar_int.h"
+#endif
+#if BTA_AV_INCLUDED==TRUE
+#include "bta_av_int.h"
+#endif
+
+#if BTA_SC_INCLUDED==TRUE
+#include "bta_sc_int.h"
+#endif
+
+#if BTA_HD_INCLUDED==TRUE
+#include "bta_hd_int.h"
+#endif
+
+#if BTA_HH_INCLUDED==TRUE
+#include "bta_hh_int.h"
+#endif
+
+#if BTA_FM_INCLUDED==TRUE
+#include "bta_fm_int.h"
+#endif
+
+#if BTA_FMTX_INCLUDED==TRUE
+#include "bta_fmtx_int.h"
+#endif
+
+#if BTA_JV_INCLUDED==TRUE
+#include "bta_jv_int.h"
+tBTA_JV_CB *bta_jv_cb_ptr = NULL;
+#endif
+
+#if BTA_MCE_INCLUDED == TRUE
+#include "bta_mce_int.h"
+#endif
+
+#if BTA_MSE_INCLUDED == TRUE
+#include "bta_mse_int.h"
+#endif
+
+#if BTA_HL_INCLUDED == TRUE
+#include "bta_hl_int.h"
+#endif
+
+#if BTA_GATT_INCLUDED == TRUE
+#include "bta_gattc_int.h"
+#include "bta_gatts_int.h"
+#endif
+
+#if BTA_PAN_INCLUDED==TRUE
+#include "bta_pan_int.h"
+#endif
+
+#include "bta_sys_int.h"
+
+/* control block for patch ram downloading */
+#include "bta_prm_int.h"
+
+#endif /* BTA_INCLUDED */
+// btla-specific --
+
+/*****************************************************************************
+**                          F U N C T I O N S                                *
+******************************************************************************/
+
+/*****************************************************************************
+**
+** Function         BTE_InitStack
+**
+** Description      Initialize control block memory for each component.
+**
+**                  Note: The core stack components must be called
+**                      before creating the BTU Task.  The rest of the
+**                      components can be initialized at a later time if desired
+**                      as long as the component's init function is called
+**                      before accessing any of its functions.
+**
+** Returns          void
+**
+******************************************************************************/
+BT_API void BTE_InitStack(void)
+{
+/* Initialize the optional stack components */
+
+/****************************
+** RFCOMM and its profiles **
+*****************************/
+#if (defined(RFCOMM_INCLUDED) && RFCOMM_INCLUDED == TRUE)
+    RFCOMM_Init();
+
+#if (defined(SPP_INCLUDED) && SPP_INCLUDED == TRUE)
+    SPP_Init();
+#endif  /* SPP */
+
+#if (defined(DUN_INCLUDED) && DUN_INCLUDED == TRUE)
+    DUN_Init();
+#endif  /* DUN */
+
+#if (defined(HSP2_INCLUDED) && HSP2_INCLUDED == TRUE)
+    HSP2_Init();
+#endif  /* HSP2 */
+
+#if (defined(HFP_INCLUDED) && HFP_INCLUDED == TRUE)
+    HFP_Init();
+#endif  /* HFP */
+
+/**************************
+** OBEX and its profiles **
+***************************/
+#if (defined(OBX_INCLUDED) && OBX_INCLUDED == TRUE)
+    OBX_Init();
+#if (defined(BIP_INCLUDED) && BIP_INCLUDED == TRUE)
+    BIP_Init();
+#if (defined(BTU_BTA_INCLUDED) && BTU_BTA_INCLUDED == TRUE)
+#if (defined(BTA_BI_INCLUDED) && BTA_BI_INCLUDED == TRUE)
+    BTA_BicInit();
+#endif  /* BTA BI */
+#endif
+#endif  /* BIP */
+
+#if (defined(GOEP_INCLUDED) && GOEP_INCLUDED == TRUE)
+    GOEP_Init();
+#endif /* GOEP */
+
+
+#if (defined(FTP_INCLUDED) && FTP_INCLUDED == TRUE)
+    FTP_Init();
+#endif
+#if (defined(OPP_INCLUDED) && OPP_INCLUDED == TRUE)
+    OPP_Init();
+#endif
+
+#if (defined(BPP_INCLUDED) && BPP_INCLUDED == TRUE)
+    BPP_Init();
+#endif  /* BPP */
+#endif  /* OBX */
+
+
+#endif  /* RFCOMM Included */
+
+/*************************
+** TCS and its profiles **
+**************************/
+#if (defined(TCS_INCLUDED) && TCS_INCLUDED == TRUE)
+    TCS_Init();
+
+#if (defined(CTP_INCLUDED) && CTP_INCLUDED == TRUE)
+    CTP_Init();
+#endif /* CTP_INCLUDED */
+
+#if (defined(ICP_INCLUDED) && ICP_INCLUDED == TRUE)
+    ICP_Init();
+#endif /* ICP_INCLUDED */
+
+#endif /* TCS_INCLUDED */
+
+
+/**************************
+** BNEP and its profiles **
+***************************/
+#if (defined(BNEP_INCLUDED) && BNEP_INCLUDED == TRUE)
+    BNEP_Init();
+
+#if (defined(PAN_INCLUDED) && PAN_INCLUDED == TRUE)
+    PAN_Init();
+#endif  /* PAN */
+#endif  /* BNEP Included */
+
+
+/**************************
+** AVDT and its profiles **
+***************************/
+#if (defined(A2D_INCLUDED) && A2D_INCLUDED == TRUE)
+    A2D_Init();
+#endif  /* AADP */
+
+
+#if (defined(AVRC_INCLUDED) && AVRC_INCLUDED == TRUE)
+    AVRC_Init();
+#endif
+
+
+/***********
+** Others **
+************/
+#if (defined(GAP_INCLUDED) && GAP_INCLUDED == TRUE)
+    GAP_Init();
+#endif  /* GAP Included */
+
+#if (defined(HCRP_INCLUDED) && HCRP_INCLUDED == TRUE)
+#if (defined(HCRP_CLIENT_INCLUDED) && HCRP_CLIENT_INCLUDED == TRUE)
+    HCRP_Init();
+#endif
+#if (defined(HCRP_SERVER_INCLUDED) && HCRP_SERVER_INCLUDED == TRUE)
+    HCRPM_Init();
+#endif
+#endif  /* HCRP Included */
+
+#if (defined(SAP_SERVER_INCLUDED) && SAP_SERVER_INCLUDED == TRUE)
+    SAP_Init();
+#endif  /* SAP_SERVER_INCLUDED */
+
+#if (defined(HID_DEV_INCLUDED) && HID_DEV_INCLUDED == TRUE)
+    HID_DevInit();
+#endif
+#if (defined(HID_HOST_INCLUDED) && HID_HOST_INCLUDED == TRUE)
+    HID_HostInit();
+#endif
+
+#if (defined(MCA_INCLUDED) && MCA_INCLUDED == TRUE)
+    MCA_Init();
+#endif  /* SAP_SERVER_INCLUDED */
+
+/****************
+** BTA Modules **
+*****************/
+// btla-specific ++
+#if (BTA_INCLUDED == TRUE && BTA_DYNAMIC_MEMORY == TRUE)
+    memset((void*)bta_sys_cb_ptr, 0, sizeof(tBTA_SYS_CB));
+    memset((void*)bta_dm_cb_ptr, 0, sizeof(tBTA_DM_CB));
+    memset((void*)bta_dm_search_cb_ptr, 0, sizeof(tBTA_DM_SEARCH_CB));
+    memset((void*)bta_dm_di_cb_ptr, 0, sizeof(tBTA_DM_DI_CB));
+    memset((void*)bta_prm_cb_ptr, 0, sizeof(tBTA_PRM_CB));
+
+#if BTA_AC_INCLUDED == TRUE
+    memset((void*)bta_acc_cb_ptr, 0, sizeof(tBTA_ACC_CB));
+    memset((void*)bta_acs_cb_ptr, 0, sizeof(tBTA_ACS_CB));
+#endif
+#if BTA_AG_INCLUDED == TRUE
+    memset((void*)bta_ag_cb_ptr, 0, sizeof(tBTA_AG_CB));
+#endif
+#if BTA_HS_INCLUDED == TRUE
+    memset((void*)bta_hs_cb_ptr, 0, sizeof(tBTA_HS_CB));
+#endif
+#if BTA_DG_INCLUDED == TRUE
+    memset((void*)bta_dg_cb_ptr, 0, sizeof(tBTA_DG_CB));
+#endif
+#if BTA_FT_INCLUDED==TRUE
+    memset((void*)bta_ftc_cb_ptr, 0, sizeof(tBTA_FTC_CB));
+    memset((void*)bta_fts_cb_ptr, 0, sizeof(tBTA_FTS_CB));
+#endif
+#if BTA_PBC_INCLUDED==TRUE
+    memset((void*)bta_pbc_cb_ptr, 0, sizeof(tBTA_PBC_CB));
+#endif
+#if BTA_PBS_INCLUDED==TRUE
+    memset((void*)bta_pbs_cb_ptr, 0, sizeof(tBTA_PBS_CB));
+#endif
+#if BTA_OP_INCLUDED==TRUE
+    memset((void*)bta_opc_cb_ptr, 0, sizeof(tBTA_OPC_CB));
+    memset((void*)bta_ops_cb_ptr, 0, sizeof(tBTA_OPS_CB));
+#endif
+#if BTA_SS_INCLUDED==TRUE
+    memset((void*)bta_ss_cb_ptr, 0, sizeof(tBTA_SS_CB));
+#endif
+#if BTA_CT_INCLUDED==TRUE
+    memset((void*)bta_ct_cb_ptr, 0, sizeof(tBTA_CT_CB));
+#endif
+#if BTA_CG_INCLUDED==TRUE
+    memset((void*)bta_cg_cb_ptr, 0, sizeof(tBTA_CG_CB));
+#endif
+#if BTA_BI_INCLUDED==TRUE
+    memset((void *)bta_bic_cb_ptr, 0, sizeof(tBTA_BIC_CB));
+    memset((void *)bta_bis_cb_ptr, 0, sizeof(tBTA_BIS_CB));
+#endif
+#if BTA_AR_INCLUDED==TRUE
+    memset((void *)bta_ar_cb_ptr, 0, sizeof(tBTA_AR_CB));
+#endif
+#if BTA_AV_INCLUDED==TRUE
+    memset((void *)bta_av_cb_ptr, 0, sizeof(tBTA_AV_CB));
+#endif
+#if BTA_PR_INCLUDED==TRUE
+    memset((void *)bta_pr_cb_ptr, 0, sizeof(tBTA_PR_CB));
+#endif
+#if BTA_SC_INCLUDED==TRUE
+    memset((void *)bta_sc_cb_ptr, 0, sizeof(tBTA_SC_CB));
+#endif
+#if BTA_HD_INCLUDED==TRUE
+    memset((void *)bta_hd_cb_ptr, 0, sizeof(tBTA_HD_CB));
+#endif
+#if BTA_HH_INCLUDED==TRUE
+    memset((void *)bta_hh_cb_ptr, 0, sizeof(tBTA_HH_CB));
+#endif
+#if BTA_FM_INCLUDED==TRUE
+    memset((void *)bta_fm_cb_ptr, 0, sizeof(tBTA_FM_CB));
+#endif
+#if BTA_FMTX_INCLUDED==TRUE
+    memset((void *)bta_fmtx_cb_ptr, 0, sizeof(tBTA_FMTX_CB));
+#endif
+#if 0
+#if BTA_JV_INCLUDED==TRUE
+    memset((void *)bta_jv_cb_ptr, 0, sizeof(tBTA_JV_CB));
+#endif
+#endif
+#if BTA_HL_INCLUDED==TRUE
+    memset((void *)bta_hl_cb_ptr, 0, sizeof(tBTA_HL_CB));
+#endif
+#if BTA_GATT_INCLUDED==TRUE
+    memset((void *)bta_gattc_cb_ptr, 0, sizeof(tBTA_GATTC_CB));
+    memset((void *)bta_gatts_cb_ptr, 0, sizeof(tBTA_GATTS_CB));
+#endif
+#if BTA_PAN_INCLUDED==TRUE
+    memset((void *)bta_pan_cb_ptr, 0, sizeof(tBTA_PAN_CB));
+#endif
+
+#endif /* BTA_INCLUDED == TRUE */
+// btla-specific --
+}
diff --git a/main/bte_logmsg.c b/main/bte_logmsg.c
new file mode 100644
index 0000000..52502ae
--- /dev/null
+++ b/main/bte_logmsg.c
@@ -0,0 +1,636 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Contains the LogMsg wrapper routines for BTE.  It routes calls the
+ *  appropriate application's LogMsg equivalent.
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdarg.h>
+
+#include "gki.h"
+#include "bte.h"
+
+#include "bte_appl.h"
+
+#if MMI_INCLUDED == TRUE
+#include "mmi.h"
+#endif
+
+/* always enable trace framework */
+
+#include "btu.h"
+#include "l2c_api.h"
+#if (RFCOMM_INCLUDED==TRUE)
+#include "port_api.h"
+#endif
+#if (OBX_INCLUDED==TRUE)
+#include "obx_api.h"
+#endif
+#if (AVCT_INCLUDED==TRUE)
+#include "avct_api.h"
+#endif
+#if (AVDT_INCLUDED==TRUE)
+#include "avdt_api.h"
+#endif
+#if (AVRC_INCLUDED==TRUE)
+#include "avrc_api.h"
+#endif
+#if (AVDT_INCLUDED==TRUE)
+#include "avdt_api.h"
+#endif
+#if (A2D_INCLUDED==TRUE)
+#include "a2d_api.h"
+#endif
+#if (BIP_INCLUDED==TRUE)
+#include "bip_api.h"
+#endif
+#if (BNEP_INCLUDED==TRUE)
+#include "bnep_api.h"
+#endif
+#if (BPP_INCLUDED==TRUE)
+#include "bpp_api.h"
+#endif
+#include "btm_api.h"
+#if (DUN_INCLUDED==TRUE)
+#include "dun_api.h"
+#endif
+#if (GAP_INCLUDED==TRUE)
+#include "gap_api.h"
+#endif
+#if (GOEP_INCLUDED==TRUE)
+#include "goep_util.h"
+#endif
+#if (HCRP_INCLUDED==TRUE)
+#include "hcrp_api.h"
+#endif
+#if (PAN_INCLUDED==TRUE)
+#include "pan_api.h"
+#endif
+#include "sdp_api.h"
+
+#if (BLE_INCLUDED==TRUE)
+#include "gatt_api.h"
+#endif
+
+    /* LayerIDs for BTA, currently everything maps onto appl_trace_level */
+#if (BTA_INCLUDED==TRUE)
+#include "bta_api.h"
+#endif
+
+
+#if defined(__CYGWIN__) || defined(__linux__)
+#undef RPC_INCLUDED
+#define RPC_INCLUDED TRUE
+
+#include <sys/time.h>
+#include <time.h>
+
+#if (defined(ANDROID_USE_LOGCAT) && (ANDROID_USE_LOGCAT==TRUE))
+const char * const bt_layer_tags[] = {
+    "bt-btif",
+    "bt-usb",
+    "bt-serial",
+    "bt-socket",
+    "bt-rs232",
+    "bt-lc",
+    "bt-lm",
+    "bt-hci",
+    "bt-l2cap",
+    "bt-rfcomm",
+    "bt-sdp",
+    "bt-tcs",
+    "bt-obex",
+    "bt-btm",
+    "bt-gap",
+    "bt-dun",
+    "bt-goep",
+    "bt-icp",
+    "bt-hsp2",
+    "bt-spp",
+    "bt-ctp",
+    "bt-bpp",
+    "bt-hcrp",
+    "bt-ftp",
+    "bt-opp",
+    "bt-btu",
+    "bt-gki",
+    "bt-bnep",
+    "bt-pan",
+    "bt-hfp",
+    "bt-hid",
+    "bt-bip",
+    "bt-avp",
+    "bt-a2d",
+    "bt-sap",
+    "bt-amp",
+    "bt-mca",
+    "bt-att",
+    "bt-smp",
+    "bt-nfc",
+    "bt-nci",
+    "bt-idep",
+    "bt-ndep",
+    "bt-llcp",
+    "bt-rw",
+    "bt-ce",
+    "bt-snep",
+    "bt-ndef",
+    "bt-nfa",
+};
+
+#ifndef LINUX_NATIVE
+#include <cutils/log.h>
+#define LOGI0(t,s) __android_log_write(ANDROID_LOG_INFO, t, s)
+#define LOGD0(t,s) __android_log_write(ANDROID_LOG_DEBUG, t, s)
+#define LOGW0(t,s) __android_log_write(ANDROID_LOG_WARN, t, s)
+#define LOGE0(t,s) __android_log_write(ANDROID_LOG_ERROR, t, s)
+
+#else
+#undef ANDROID_USE_LOGCAT
+#endif
+
+#endif
+
+
+//#include "btl_cfg.h"
+#define BTL_GLOBAL_PROP_TRC_FLAG "TRC_BTAPP"
+#ifndef DEFAULT_CONF_TRACE_LEVEL
+#define DEFAULT_CONF_TRACE_LEVEL BT_TRACE_LEVEL_WARNING
+#endif
+
+#ifndef BTE_LOG_BUF_SIZE
+#define BTE_LOG_BUF_SIZE  1024
+#endif
+#define BTE_LOG_MAX_SIZE  (BTE_LOG_BUF_SIZE - 12)
+
+
+//#define BTE_MAP_TRACE_LEVEL FALSE
+/* map by default BTE trace levels onto android trace levels */
+#ifndef BTE_MAP_TRACE_LEVEL
+#define BTE_MAP_TRACE_LEVEL TRUE
+#endif
+
+// #define BTE_ANDROID_INTERNAL_TIMESTAMP TRUE
+/* by default no internal timestamp. adb logcate -v time allows having timestamps */
+#ifndef BTE_ANDROID_INTERNAL_TIMESTAMP
+#define BTE_ANDROID_INTERNAL_TIMESTAMP FALSE
+#endif
+#if (BTE_ANDROID_INTERNAL_TIMESTAMP==TRUE)
+#define MSG_BUFFER_OFFSET strlen(buffer)
+#else
+#define MSG_BUFFER_OFFSET 0
+#endif
+
+//#define DBG_TRACE
+
+#if defined( DBG_TRACE )
+#define DBG_TRACE_API0( m ) BT_TRACE_0( TRACE_LAYER_HCI, TRACE_TYPE_API, m )
+#define DBG_TRACE_WARNING2( m, p0, p1 ) BT_TRACE_2( TRACE_LAYER_BTM, (TRACE_ORG_APPL|TRACE_TYPE_WARNING), m, p0, p1 )
+#else
+#define DBG_TRACE_API0( m )
+#define DBG_TRACE_WARNING2( m, p0, p1 )
+#endif
+#define DBG_TRACE_DEBUG2( m, p0, p1 ) BT_TRACE_2( TRACE_LAYER_BTM, (TRACE_ORG_APPL|TRACE_TYPE_DEBUG), m, p0, p1 )
+
+void
+LogMsg(UINT32 trace_set_mask, const char *fmt_str, ...)
+{
+	static char buffer[BTE_LOG_BUF_SIZE];
+    int trace_layer = TRACE_GET_LAYER(trace_set_mask);
+    if (trace_layer >= TRACE_LAYER_MAX_NUM)
+        trace_layer = 0;
+
+	va_list ap;
+#if (BTE_ANDROID_INTERNAL_TIMESTAMP==TRUE)
+	struct timeval tv;
+	struct timezone tz;
+	struct tm *tm;
+	time_t t;
+
+	gettimeofday(&tv, &tz);
+	time(&t);
+	tm = localtime(&t);
+
+    sprintf(buffer, "%02d:%02d:%02d.%03d ", tm->tm_hour, tm->tm_min, tm->tm_sec,
+        tv.tv_usec / 1000);
+#endif
+	va_start(ap, fmt_str);
+	vsnprintf(&buffer[MSG_BUFFER_OFFSET], BTE_LOG_MAX_SIZE, fmt_str, ap);
+	va_end(ap);
+
+#if (defined(ANDROID_USE_LOGCAT) && (ANDROID_USE_LOGCAT==TRUE))
+#if (BTE_MAP_TRACE_LEVEL==TRUE)
+    switch ( TRACE_GET_TYPE(trace_set_mask) )
+    {
+        case TRACE_TYPE_ERROR:
+            LOGE0(bt_layer_tags[trace_layer], buffer);
+            break;
+        case TRACE_TYPE_WARNING:
+            LOGW0(bt_layer_tags[trace_layer], buffer);
+            break;
+        case TRACE_TYPE_API:
+        case TRACE_TYPE_EVENT:
+            LOGI0(bt_layer_tags[trace_layer], buffer);
+            break;
+        case TRACE_TYPE_DEBUG:
+            LOGD0(bt_layer_tags[trace_layer], buffer);
+            break;
+        default:
+            LOGE0(bt_layer_tags[trace_layer], buffer);      /* we should never get this */
+            break;
+    }
+#else
+    LOGI0(bt_layer_tags[trace_layer], buffer);
+#endif
+#else
+	write(2, buffer, strlen(buffer));
+	write(2, "\n", 1);
+#endif
+}
+
+void
+ScrLog(UINT32 trace_set_mask, const char *fmt_str, ...)
+{
+	static char buffer[BTE_LOG_BUF_SIZE];
+
+	va_list ap;
+	struct timeval tv;
+	struct timezone tz;
+	struct tm *tm;
+	time_t t;
+    int trace_layer = TRACE_GET_LAYER(trace_set_mask);
+    if (trace_layer >= TRACE_LAYER_MAX_NUM)
+        trace_layer = 0;
+
+	gettimeofday(&tv, &tz);
+	time(&t);
+	tm = localtime(&t);
+
+        sprintf(buffer, "%02d:%02d:%02d.%03ld ", tm->tm_hour, tm->tm_min, tm->tm_sec,
+        tv.tv_usec / 1000);
+
+	va_start(ap, fmt_str);
+	vsnprintf(&buffer[strlen(buffer)], BTE_LOG_MAX_SIZE, fmt_str, ap);
+	va_end(ap);
+
+#if (defined(ANDROID_USE_LOGCAT) && (ANDROID_USE_LOGCAT==TRUE))
+    LOGI0(bt_layer_tags[trace_layer], buffer);
+#else
+	write(2, buffer, strlen(buffer));
+	write(2, "\n", 1);
+#endif
+}
+
+/* this function should go into BTAPP_DM for example */
+BT_API UINT8 BTAPP_SetTraceLevel( UINT8 new_level )
+{
+    if (new_level != 0xFF)
+        appl_trace_level = new_level;
+
+    return (appl_trace_level);
+}
+
+BTU_API UINT8 BTU_SetTraceLevel( UINT8 new_level )
+{
+    if (new_level != 0xFF)
+        btu_cb.trace_level = new_level;
+
+    return (btu_cb.trace_level);
+}
+
+BOOLEAN trace_conf_enabled = FALSE;
+
+void bte_trace_conf(char *p_conf_name, char *p_conf_value)
+{
+    tBTTRC_FUNC_MAP *p_f_map = (tBTTRC_FUNC_MAP *) &bttrc_set_level_map[0];
+
+    while (p_f_map->trc_name != NULL)
+    {
+        if (strcmp(p_f_map->trc_name, (const char *)p_conf_name) == 0)
+        {
+            p_f_map->trace_level = (UINT8) atoi(p_conf_value);
+            break;
+        }
+        p_f_map++;
+    }
+}
+
+/********************************************************************************
+ **
+ **    Function Name:    BTA_SysSetTraceLevel
+ **
+ **    Purpose:          set or reads the different Trace Levels of layer IDs (see bt_trace.h,
+ **                      BTTRC_ID_xxxx
+ **
+ **    Input Parameters: Array with trace layers to set to a given level or read. a layer ID of 0
+ **                      defines the end of the list
+ **                      WARNING: currently type should be 0-5! or FF for reading!!!!
+ **
+ **    Returns:
+ **                      input array with trace levels for given layer id
+ **
+ *********************************************************************************/
+BT_API tBTTRC_LEVEL * BTA_SysSetTraceLevel(tBTTRC_LEVEL * p_levels)
+{
+    const tBTTRC_FUNC_MAP *p_f_map;
+    tBTTRC_LEVEL *p_l = p_levels;
+
+    DBG_TRACE_API0( "BTA_SysSetTraceLevel()" );
+
+    while (0 != p_l->layer_id)
+    {
+        p_f_map = &bttrc_set_level_map[0];
+
+        while (0 != p_f_map->layer_id_start)
+        {
+            printf("BTA_SysSetTraceLevel - trace id in map start = %d end= %d,  paramter id = %d\r\n", p_f_map->layer_id_start, p_f_map->layer_id_end, p_l->layer_id );
+            /* as p_f_map is ordered by increasing layer id, go to next map entry as long end id
+             * is smaller */
+            //if (p_f_map->layer_id_end < p_l->layer_id)
+            //{
+                //p_f_map++;
+            //}
+            //else
+            {
+                /* check if layer_id actually false into a range or if it is note existing in the  map */
+                if ((NULL != p_f_map->p_f) && (p_f_map->layer_id_start <= p_l->layer_id) && (p_f_map->layer_id_end >= p_l->layer_id) )
+                {
+                    DBG_TRACE_DEBUG2( "BTA_SysSetTraceLevel( id:%d, level:%d ): setting/reading",
+                            p_l->layer_id, p_l->type );
+                    p_l->type = p_f_map->p_f(p_l->type);
+                    break;
+                }
+                else
+                {
+                    DBG_TRACE_WARNING2( "BTA_SysSetTraceLevel( id:%d, level:%d ): MISSING Set function OR ID in map!",
+                            p_l->layer_id, p_l->type );
+                }
+                /* set/read next trace level by getting out ot map loop */
+                //p_l++;
+                //break;
+            }
+            p_f_map++;
+        }
+        //if (0 == p_f_map->layer_id_start)
+        {
+            DBG_TRACE_WARNING2( "BTA_SysSetTraceLevel( id:%d, level:%d ): ID NOT FOUND in map. Skip to next",
+                    p_l->layer_id, p_l->type );
+            p_l++;
+        }
+    }
+
+    return p_levels;
+} /* BTA_SysSetTraceLevel() */
+
+/* make sure list is order by increasing layer id!!! */
+tBTTRC_FUNC_MAP bttrc_set_level_map[] = {
+    {BTTRC_ID_STK_BTU, BTTRC_ID_STK_HCI, BTU_SetTraceLevel, "TRC_HCI", DEFAULT_CONF_TRACE_LEVEL},
+    {BTTRC_ID_STK_L2CAP, BTTRC_ID_STK_L2CAP, L2CA_SetTraceLevel, "TRC_L2CAP", DEFAULT_CONF_TRACE_LEVEL},
+#if (RFCOMM_INCLUDED==TRUE)
+    {BTTRC_ID_STK_RFCOMM, BTTRC_ID_STK_RFCOMM_DATA, PORT_SetTraceLevel, "TRC_RFCOMM", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (OBX_INCLUDED==TRUE)
+    {BTTRC_ID_STK_OBEX, BTTRC_ID_STK_OBEX, OBX_SetTraceLevel, "TRC_OBEX", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (AVCT_INCLUDED==TRUE)
+    //{BTTRC_ID_STK_AVCT, BTTRC_ID_STK_AVCT, NULL, "TRC_AVCT", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (AVDT_INCLUDED==TRUE)
+    {BTTRC_ID_STK_AVDT, BTTRC_ID_STK_AVDT, AVDT_SetTraceLevel, "TRC_AVDT", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (AVRC_INCLUDED==TRUE)
+    {BTTRC_ID_STK_AVRC, BTTRC_ID_STK_AVRC, AVRC_SetTraceLevel, "TRC_AVRC", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (AVDT_INCLUDED==TRUE)
+    //{BTTRC_ID_AVDT_SCB, BTTRC_ID_AVDT_CCB, NULL, "TRC_AVDT_SCB", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (A2D_INCLUDED==TRUE)
+    {BTTRC_ID_STK_A2D, BTTRC_ID_STK_A2D, A2D_SetTraceLevel, "TRC_A2D", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (BIP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_BIP, BTTRC_ID_STK_BIP, BIP_SetTraceLevel, "TRC_BIP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (BNEP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_BNEP, BTTRC_ID_STK_BNEP, BNEP_SetTraceLevel, "TRC_BNEP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (BPP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_BPP, BTTRC_ID_STK_BPP, BPP_SetTraceLevel, "TRC_BPP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+    {BTTRC_ID_STK_BTM_ACL, BTTRC_ID_STK_BTM_SEC, BTM_SetTraceLevel, "TRC_BTM", DEFAULT_CONF_TRACE_LEVEL},
+#if (DUN_INCLUDED==TRUE)
+    {BTTRC_ID_STK_DUN, BTTRC_ID_STK_DUN, DUN_SetTraceLevel, "TRC_DUN", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (GAP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_GAP, BTTRC_ID_STK_GAP, GAP_SetTraceLevel, "TRC_GAP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (GOEP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_GOEP, BTTRC_ID_STK_GOEP, GOEP_SetTraceLevel, "TRC_GOEP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (HCRP_INCLUDED==TRUE)
+    {BTTRC_ID_STK_HCRP, BTTRC_ID_STK_HCRP, HCRP_SetTraceLevel, "TRC_HCRP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (PAN_INCLUDED==TRUE)
+    {BTTRC_ID_STK_PAN, BTTRC_ID_STK_PAN, PAN_SetTraceLevel, "TRC_PAN", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (SAP_SERVER_INCLUDED==TRUE)
+    {BTTRC_ID_STK_SAP, BTTRC_ID_STK_SAP, NULL, "TRC_SAP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+    {BTTRC_ID_STK_SDP, BTTRC_ID_STK_SDP, SDP_SetTraceLevel, "TRC_SDP", DEFAULT_CONF_TRACE_LEVEL},
+#if (BLE_INCLUDED==TRUE)
+    {BTTRC_ID_STK_GATT, BTTRC_ID_STK_GATT, GATT_SetTraceLevel, "TRC_GATT", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+#if (BLE_INCLUDED==TRUE)
+    {BTTRC_ID_STK_SMP, BTTRC_ID_STK_SMP, SMP_SetTraceLevel, "TRC_SMP", DEFAULT_CONF_TRACE_LEVEL},
+#endif
+
+#if (BTA_INCLUDED==TRUE)
+    /* LayerIDs for BTA, currently everything maps onto appl_trace_level.
+     * BTL_GLOBAL_PROP_TRC_FLAG serves as flag in conf.
+     */
+    {BTTRC_ID_BTA_ACC, BTTRC_ID_BTAPP, BTAPP_SetTraceLevel, BTL_GLOBAL_PROP_TRC_FLAG, DEFAULT_CONF_TRACE_LEVEL},
+#endif
+
+    {0, 0, NULL, NULL, DEFAULT_CONF_TRACE_LEVEL}
+};
+
+const UINT16 bttrc_map_size = sizeof(bttrc_set_level_map)/sizeof(tBTTRC_FUNC_MAP);
+#endif
+
+/********************************************************************************
+ **
+ **    Function Name:     BTE_InitTraceLevels
+ **
+ **    Purpose:           This function can be used to set the boot time reading it from the
+ **                       platform.
+ **                       WARNING: it is called under BTU context and it blocks the BTU task
+ **                       till it returns (sync call)
+ **
+ **    Input Parameters:  None, platform to provide levels
+ **    Returns:
+ **                       Newly set levels, if any!
+ **
+ *********************************************************************************/
+BT_API void BTE_InitTraceLevels( void )
+{
+    /* read and set trace levels by calling the different XXX_SetTraceLevel().
+     */
+#if ( BT_USE_TRACES==TRUE )
+    if (trace_conf_enabled == TRUE)
+    {
+        tBTTRC_FUNC_MAP *p_f_map = (tBTTRC_FUNC_MAP *) &bttrc_set_level_map[0];
+
+        while (p_f_map->trc_name != NULL)
+        {
+            ALOGI("BTE_InitTraceLevels -- %s", p_f_map->trc_name);
+
+            if (p_f_map->p_f)
+                p_f_map->p_f(p_f_map->trace_level);
+
+            p_f_map++;
+        }
+    }
+    else
+    {
+        ALOGI("[bttrc] using compile default trace settings");
+    }
+#endif
+}
+
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_0
+ **
+ **    Purpose:  Encodes a trace message that has no parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_0(UINT32 trace_set_mask, const char *fmt_str) {
+    LogMsg(trace_set_mask, fmt_str);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_1
+ **
+ **    Purpose:  Encodes a trace message that has one parameter argument
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_1(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1) {
+
+    LogMsg(trace_set_mask, fmt_str, p1);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_2
+ **
+ **    Purpose:  Encodes a trace message that has two parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_2(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2) {
+    LogMsg(trace_set_mask, fmt_str, p1, p2);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_3
+ **
+ **    Purpose:  Encodes a trace message that has three parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_3(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+        UINT32 p3) {
+    LogMsg(trace_set_mask, fmt_str, p1, p2, p3);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_4
+ **
+ **    Purpose:  Encodes a trace message that has four parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_4(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+        UINT32 p3, UINT32 p4) {
+    LogMsg(trace_set_mask, fmt_str, p1, p2, p3, p4);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_5
+ **
+ **    Purpose:  Encodes a trace message that has five parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_5(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+        UINT32 p3, UINT32 p4, UINT32 p5) {
+    LogMsg(trace_set_mask, fmt_str, p1, p2, p3, p4, p5);
+}
+
+/********************************************************************************
+ **
+ **    Function Name:   LogMsg_6
+ **
+ **    Purpose:  Encodes a trace message that has six parameter arguments
+ **
+ **    Input Parameters:  trace_set_mask: tester trace type.
+ **                       fmt_str: displayable string.
+ **    Returns:
+ **                      Nothing.
+ **
+ *********************************************************************************/
+void LogMsg_6(UINT32 trace_set_mask, const char *fmt_str, UINT32 p1, UINT32 p2,
+        UINT32 p3, UINT32 p4, UINT32 p5, UINT32 p6) {
+    LogMsg(trace_set_mask, fmt_str, p1, p2, p3, p4, p5, p6);
+}
diff --git a/main/bte_main.c b/main/bte_main.c
new file mode 100644
index 0000000..4e7e37c
--- /dev/null
+++ b/main/bte_main.c
@@ -0,0 +1,570 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Filename:      bte_main.c
+ *
+ *  Description:   Contains BTE core stack initialization and shutdown code
+ *
+ ******************************************************************************/
+#include <fcntl.h>
+#include <stdlib.h>
+#include <assert.h>
+
+#include "gki.h"
+#include "bd.h"
+#include "btu.h"
+#include "bte.h"
+#include "bta_api.h"
+#include "bt_hci_lib.h"
+
+/*******************************************************************************
+**  Constants & Macros
+*******************************************************************************/
+
+/* Run-time configuration file */
+#ifndef BTE_STACK_CONF_FILE
+#define BTE_STACK_CONF_FILE "/etc/bluetooth/bt_stack.conf"
+#endif
+
+/* if not specified in .txt file then use this as default  */
+#ifndef HCI_LOGGING_FILENAME
+#define HCI_LOGGING_FILENAME  "/data/misc/bluedroid/btsnoop_hci.log"
+#endif
+
+/*******************************************************************************
+**  Local type definitions
+*******************************************************************************/
+
+/******************************************************************************
+**  Variables
+******************************************************************************/
+BOOLEAN hci_logging_enabled = FALSE;    /* by default, turn hci log off */
+char hci_logfile[256] = HCI_LOGGING_FILENAME;
+
+
+/*******************************************************************************
+**  Static variables
+*******************************************************************************/
+static bt_hc_interface_t *bt_hc_if=NULL;
+static const bt_hc_callbacks_t hc_callbacks;
+static BOOLEAN lpm_enabled = FALSE;
+
+/*******************************************************************************
+**  Static functions
+*******************************************************************************/
+static void bte_main_in_hw_init(void);
+
+/*******************************************************************************
+**  Externs
+*******************************************************************************/
+BTU_API extern UINT32 btu_task (UINT32 param);
+BTU_API extern void BTE_Init (void);
+BT_API extern void BTE_LoadStack(void);
+BT_API void BTE_UnloadStack(void);
+extern void scru_flip_bda (BD_ADDR dst, const BD_ADDR src);
+extern void bte_load_conf(const char *p_path);
+
+
+/*******************************************************************************
+**                        System Task Configuration
+*******************************************************************************/
+
+/* bluetooth protocol stack (BTU) task */
+#ifndef BTE_BTU_STACK_SIZE
+#define BTE_BTU_STACK_SIZE       0//0x2000         /* In bytes */
+#endif
+#define BTE_BTU_TASK_STR        ((INT8 *) "BTU")
+UINT32 bte_btu_stack[(BTE_BTU_STACK_SIZE + 3) / 4];
+
+/******************************************************************************
+**
+** Function         bte_main_in_hw_init
+**
+** Description      Internal helper function for chip hardware init
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_in_hw_init(void)
+{
+    if ( (bt_hc_if = (bt_hc_interface_t *) bt_hc_get_interface()) \
+         == NULL)
+    {
+        APPL_TRACE_ERROR0("!!! Failed to get BtHostControllerInterface !!!");
+    }
+}
+
+/******************************************************************************
+**
+** Function         bte_main_boot_entry
+**
+** Description      BTE MAIN API - Entry point for BTE chip/stack initialization
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_boot_entry(void)
+{
+    /* initialize OS */
+    GKI_init();
+
+    bte_main_in_hw_init();
+
+    bte_load_conf(BTE_STACK_CONF_FILE);
+
+#if (BTTRC_INCLUDED == TRUE)
+    /* Initialize trace feature */
+    BTTRC_TraceInit(MAX_TRACE_RAM_SIZE, &BTE_TraceLogBuf[0], BTTRC_METHOD_RAM);
+#endif
+}
+
+/******************************************************************************
+**
+** Function         bte_main_shutdown
+**
+** Description      BTE MAIN API - Shutdown code for BTE chip/stack
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_shutdown()
+{
+    GKI_shutdown();
+}
+
+/******************************************************************************
+**
+** Function         bte_main_enable
+**
+** Description      BTE MAIN API - Creates all the BTE tasks. Should be called
+**                  part of the Bluetooth stack enable sequence
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_enable(uint8_t *local_addr)
+{
+    APPL_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    /* Initialize BTE control block */
+    BTE_Init();
+
+    lpm_enabled = FALSE;
+
+    if (bt_hc_if)
+    {
+        int result = bt_hc_if->init(&hc_callbacks, local_addr);
+        APPL_TRACE_EVENT1("libbt-hci init returns %d", result);
+
+        assert(result == BT_HC_STATUS_SUCCESS);
+
+        if (hci_logging_enabled == TRUE)
+            bt_hc_if->logging(BT_HC_LOGGING_ON, hci_logfile);
+
+#if (defined (BT_CLEAN_TURN_ON_DISABLED) && BT_CLEAN_TURN_ON_DISABLED == TRUE)
+        APPL_TRACE_DEBUG1("%s  Not Turninig Off the BT before Turninig ON", __FUNCTION__);
+
+        /* Do not power off the chip before powering on  if BT_CLEAN_TURN_ON_DISABLED flag
+         is defined and set to TRUE to avoid below mentioned issue.
+
+         Wingray kernel driver maintains a combined  counter to keep track of
+         BT-Wifi state. Invoking  set_power(BT_HC_CHIP_PWR_OFF) when the BT is already
+         in OFF state causes this counter to be incorrectly decremented and results in undesired
+         behavior of the chip.
+
+         This is only a workaround and when the issue is fixed in the kernel this work around
+         should be removed. */
+#else
+        /* toggle chip power to ensure we will reset chip in case
+           a previous stack shutdown wasn't completed gracefully */
+        bt_hc_if->set_power(BT_HC_CHIP_PWR_OFF);
+#endif
+        bt_hc_if->set_power(BT_HC_CHIP_PWR_ON);
+
+        bt_hc_if->preload(NULL);
+    }
+
+    GKI_create_task((TASKPTR)btu_task, BTU_TASK, BTE_BTU_TASK_STR,
+                    (UINT16 *) ((UINT8 *)bte_btu_stack + BTE_BTU_STACK_SIZE),
+                    sizeof(bte_btu_stack));
+
+    GKI_run(0);
+}
+
+/******************************************************************************
+**
+** Function         bte_main_disable
+**
+** Description      BTE MAIN API - Destroys all the BTE tasks. Should be called
+**                  part of the Bluetooth stack disable sequence
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_disable(void)
+{
+    APPL_TRACE_DEBUG1("%s", __FUNCTION__);
+
+    if (bt_hc_if)
+    {
+        bt_hc_if->cleanup();
+        bt_hc_if->set_power(BT_HC_CHIP_PWR_OFF);
+    }
+
+    GKI_destroy_task(BTU_TASK);
+
+    GKI_freeze();
+}
+
+/******************************************************************************
+**
+** Function         bte_main_postload_cfg
+**
+** Description      BTE MAIN API - Stack postload configuration
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_postload_cfg(void)
+{
+    if (bt_hc_if)
+        bt_hc_if->postload(NULL);
+}
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+/******************************************************************************
+**
+** Function         bte_main_enable_lpm
+**
+** Description      BTE MAIN API - Enable/Disable low power mode operation
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_enable_lpm(BOOLEAN enable)
+{
+    int result = -1;
+
+    if (bt_hc_if)
+        result = bt_hc_if->lpm( \
+        (enable == TRUE) ? BT_HC_LPM_ENABLE : BT_HC_LPM_DISABLE \
+        );
+
+    APPL_TRACE_EVENT2("HC lib lpm enable=%d return %d", enable, result);
+}
+
+/******************************************************************************
+**
+** Function         bte_main_lpm_allow_bt_device_sleep
+**
+** Description      BTE MAIN API - Allow BT controller goest to sleep
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_lpm_allow_bt_device_sleep()
+{
+    int result = -1;
+
+    if ((bt_hc_if) && (lpm_enabled == TRUE))
+        result = bt_hc_if->lpm(BT_HC_LPM_WAKE_DEASSERT);
+
+    APPL_TRACE_DEBUG1("HC lib lpm deassertion return %d", result);
+}
+
+/******************************************************************************
+**
+** Function         bte_main_lpm_wake_bt_device
+**
+** Description      BTE MAIN API - Wake BT controller up if it is in sleep mode
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_lpm_wake_bt_device()
+{
+    int result = -1;
+
+    if ((bt_hc_if) && (lpm_enabled == TRUE))
+        result = bt_hc_if->lpm(BT_HC_LPM_WAKE_ASSERT);
+
+    APPL_TRACE_DEBUG1("HC lib lpm assertion return %d", result);
+}
+#endif  // HCILP_INCLUDED
+
+/******************************************************************************
+**
+** Function         bte_main_hci_send
+**
+** Description      BTE MAIN API - This function is called by the upper stack to
+**                  send an HCI message. The function displays a protocol trace
+**                  message (if enabled), and then calls the 'transmit' function
+**                  associated with the currently selected HCI transport
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_hci_send (BT_HDR *p_msg, UINT16 event)
+{
+    UINT16 sub_event = event & BT_SUB_EVT_MASK;  /* local controller ID */
+
+    p_msg->event = event;
+
+
+    if((sub_event == LOCAL_BR_EDR_CONTROLLER_ID) || \
+       (sub_event == LOCAL_BLE_CONTROLLER_ID))
+    {
+        if (bt_hc_if)
+            bt_hc_if->transmit_buf((TRANSAC)p_msg, \
+                                       (char *) (p_msg + 1), \
+                                        p_msg->len);
+        else
+            GKI_freebuf(p_msg);
+    }
+    else
+    {
+        APPL_TRACE_ERROR0("Invalid Controller ID. Discarding message.");
+        GKI_freebuf(p_msg);
+    }
+}
+
+/******************************************************************************
+**
+** Function         bte_main_post_reset_init
+**
+** Description      BTE MAIN API - This function is mapped to BTM_APP_DEV_INIT
+**                  and shall be automatically called from BTE after HCI_Reset
+**
+** Returns          None
+**
+******************************************************************************/
+void bte_main_post_reset_init()
+{
+    BTM_ContinueReset();
+}
+
+/*****************************************************************************
+**
+**   libbt-hci Callback Functions
+**
+*****************************************************************************/
+
+/******************************************************************************
+**
+** Function         preload_cb
+**
+** Description      HOST/CONTROLLER LIB CALLBACK API - This function is called
+**                  when the libbt-hci completed stack preload process
+**
+** Returns          None
+**
+******************************************************************************/
+static void preload_cb(TRANSAC transac, bt_hc_preload_result_t result)
+{
+    APPL_TRACE_EVENT1("HC preload_cb %d [0:SUCCESS 1:FAIL]", result);
+
+    /* notify BTU task that libbt-hci is ready */
+    /* even if PRELOAD process failed */
+    GKI_send_event(BTU_TASK, TASK_MBOX_0_EVT_MASK);
+}
+
+/******************************************************************************
+**
+** Function         postload_cb
+**
+** Description      HOST/CONTROLLER LIB CALLBACK API - This function is called
+**                  when the libbt-hci lib completed stack postload process
+**
+** Returns          None
+**
+******************************************************************************/
+static void postload_cb(TRANSAC transac, bt_hc_postload_result_t result)
+{
+    APPL_TRACE_EVENT1("HC postload_cb %d", result);
+}
+
+/******************************************************************************
+**
+** Function         lpm_cb
+**
+** Description      HOST/CONTROLLER LIB CALLBACK API - This function is called
+**                  back from the libbt-hci to indicate the current LPM state
+**
+** Returns          None
+**
+******************************************************************************/
+static void lpm_cb(bt_hc_lpm_request_result_t result)
+{
+    APPL_TRACE_EVENT1("HC lpm_result_cb %d", result);
+    lpm_enabled = (result == BT_HC_LPM_ENABLED) ? TRUE : FALSE;
+}
+
+/******************************************************************************
+**
+** Function         hostwake_ind
+**
+** Description      HOST/CONTROLLER LIB CALLOUT API - This function is called
+**                  from the libbt-hci to indicate the HostWake event
+**
+** Returns          None
+**
+******************************************************************************/
+static void hostwake_ind(bt_hc_low_power_event_t event)
+{
+    APPL_TRACE_EVENT1("HC hostwake_ind %d", event);
+}
+
+/******************************************************************************
+**
+** Function         alloc
+**
+** Description      HOST/CONTROLLER LIB CALLOUT API - This function is called
+**                  from the libbt-hci to request for data buffer allocation
+**
+** Returns          NULL / pointer to allocated buffer
+**
+******************************************************************************/
+static char *alloc(int size)
+{
+    BT_HDR *p_hdr = NULL;
+
+    /*
+    APPL_TRACE_DEBUG1("HC alloc size=%d", size);
+    */
+
+    p_hdr = (BT_HDR *) GKI_getbuf ((UINT16) size);
+
+    if (p_hdr == NULL)
+    {
+        APPL_TRACE_WARNING0("alloc returns NO BUFFER!");
+    }
+
+    return ((char *) p_hdr);
+}
+
+/******************************************************************************
+**
+** Function         dealloc
+**
+** Description      HOST/CONTROLLER LIB CALLOUT API - This function is called
+**                  from the libbt-hci to release the data buffer allocated
+**                  through the alloc call earlier
+**
+**                  Bluedroid libbt-hci library uses 'transac' parameter to
+**                  pass data-path buffer/packet across bt_hci_lib interface
+**                  boundary. The 'p_buf' is not intended to be used here
+**                  but might point to data portion of data-path buffer.
+**
+** Returns          bt_hc_status_t
+**
+******************************************************************************/
+static int dealloc(TRANSAC transac, char *p_buf)
+{
+    GKI_freebuf(transac);
+    return BT_HC_STATUS_SUCCESS;
+}
+
+/******************************************************************************
+**
+** Function         data_ind
+**
+** Description      HOST/CONTROLLER LIB CALLOUT API - This function is called
+**                  from the libbt-hci to pass in the received HCI packets
+**
+**                  The core stack is responsible for releasing the data buffer
+**                  passed in from the libbt-hci once the core stack has done
+**                  with it.
+**
+**                  Bluedroid libbt-hci library uses 'transac' parameter to
+**                  pass data-path buffer/packet across bt_hci_lib interface
+**                  boundary. The 'p_buf' and 'len' parameters are not intended
+**                  to be used here but might point to data portion in data-
+**                  path buffer and length of valid data respectively.
+**
+** Returns          bt_hc_status_t
+**
+******************************************************************************/
+static int data_ind(TRANSAC transac, char *p_buf, int len)
+{
+    BT_HDR *p_msg = (BT_HDR *) transac;
+
+    /*
+    APPL_TRACE_DEBUG2("HC data_ind event=0x%04X (len=%d)", p_msg->event, len);
+    */
+
+    GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, transac);
+    return BT_HC_STATUS_SUCCESS;
+}
+
+/******************************************************************************
+**
+** Function         tx_result
+**
+** Description      HOST/CONTROLLER LIB CALLBACK API - This function is called
+**                  from the libbt-hci once it has processed/sent the prior data
+**                  buffer which core stack passed to it through transmit_buf
+**                  call earlier.
+**
+**                  The core stack is responsible for releasing the data buffer
+**                  if it has been completedly processed.
+**
+**                  Bluedroid libbt-hci library uses 'transac' parameter to
+**                  pass data-path buffer/packet across bt_hci_lib interface
+**                  boundary. The 'p_buf' is not intended to be used here
+**                  but might point to data portion in data-path buffer.
+**
+** Returns          bt_hc_status_t
+**
+******************************************************************************/
+static int tx_result(TRANSAC transac, char *p_buf, \
+                      bt_hc_transmit_result_t result)
+{
+    /*
+    APPL_TRACE_DEBUG2("HC tx_result %d (event=%04X)", result, \
+                      ((BT_HDR *)transac)->event);
+    */
+
+    if (result == BT_HC_TX_FRAGMENT)
+    {
+        GKI_send_msg (BTU_TASK, BTU_HCI_RCV_MBOX, transac);
+    }
+    else
+    {
+        GKI_freebuf(transac);
+    }
+
+    return BT_HC_STATUS_SUCCESS;
+}
+
+/*****************************************************************************
+**   The libbt-hci Callback Functions Table
+*****************************************************************************/
+static const bt_hc_callbacks_t hc_callbacks = {
+    sizeof(bt_hc_callbacks_t),
+    preload_cb,
+    postload_cb,
+    lpm_cb,
+    hostwake_ind,
+    alloc,
+    dealloc,
+    data_ind,
+    tx_result
+};
+
diff --git a/main/bte_version.c b/main/bte_version.c
new file mode 100644
index 0000000..0751e1d
--- /dev/null
+++ b/main/bte_version.c
@@ -0,0 +1,22 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "bt_types.h"
+
+const UINT8 bte_version_string[] = "BCM1200_PI_10.3.20.33";
+
diff --git a/stack/Android.mk b/stack/Android.mk
new file mode 100644
index 0000000..0c24805
--- /dev/null
+++ b/stack/Android.mk
@@ -0,0 +1,141 @@
+ifneq ($(TARGET_SIMULATOR),true)
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_C_INCLUDES:= . \
+                   $(LOCAL_PATH)/include \
+                   $(LOCAL_PATH)/avct \
+                   $(LOCAL_PATH)/btm \
+                   $(LOCAL_PATH)/avrc \
+                   $(LOCAL_PATH)/l2cap \
+                   $(LOCAL_PATH)/avdt \
+                   $(LOCAL_PATH)/gatt \
+                   $(LOCAL_PATH)/gap \
+                   $(LOCAL_PATH)/pan \
+                   $(LOCAL_PATH)/bnep \
+                   $(LOCAL_PATH)/hid \
+                   $(LOCAL_PATH)/sdp \
+                   $(LOCAL_PATH)/smp \
+                   $(LOCAL_PATH)/../include \
+                   $(LOCAL_PATH)/../gki/common \
+                   $(LOCAL_PATH)/../gki/ulinux \
+                   $(LOCAL_PATH)/../udrv/include \
+                   $(LOCAL_PATH)/../rpc/include \
+                   $(LOCAL_PATH)/../hcis \
+                   $(LOCAL_PATH)/../ctrlr/include \
+                   $(LOCAL_PATH)/../bta/include \
+                   $(LOCAL_PATH)/../bta/sys \
+                   $(LOCAL_PATH)/../brcm/include \
+                   $(LOCAL_PATH)/../utils/include \
+                   $(bdroid_C_INCLUDES) \
+
+LOCAL_CFLAGS += $(bdroid_CFLAGS)
+
+ifeq ($(BOARD_HAVE_BLUETOOTH_BCM),true)
+LOCAL_CFLAGS += \
+	-DBOARD_HAVE_BLUETOOTH_BCM
+endif
+
+LOCAL_PRELINK_MODULE:=false
+LOCAL_SRC_FILES:= \
+    ./a2dp/a2d_api.c \
+    ./a2dp/a2d_sbc.c \
+    ./avrc/avrc_api.c \
+    ./avrc/avrc_sdp.c \
+    ./avrc/avrc_opt.c \
+    ./hid/hidh_api.c \
+    ./hid/hidh_conn.c \
+    ./bnep/bnep_main.c \
+    ./bnep/bnep_utils.c \
+    ./bnep/bnep_api.c \
+    ./hcic/hciblecmds.c \
+    ./hcic/hcicmds.c \
+    ./btm/btm_ble.c \
+    ./btm/btm_sec.c \
+    ./btm/btm_inq.c \
+    ./btm/btm_ble_addr.c \
+    ./btm/btm_ble_bgconn.c \
+    ./btm/btm_main.c \
+    ./btm/btm_dev.c \
+    ./btm/btm_ble_gap.c \
+    ./btm/btm_acl.c \
+    ./btm/btm_sco.c \
+    ./btm/btm_pm.c \
+    ./btm/btm_devctl.c \
+    ./rfcomm/rfc_utils.c \
+    ./rfcomm/port_rfc.c \
+    ./rfcomm/rfc_l2cap_if.c \
+    ./rfcomm/rfc_mx_fsm.c \
+    ./rfcomm/port_utils.c \
+    ./rfcomm/rfc_port_fsm.c \
+    ./rfcomm/rfc_port_if.c \
+    ./rfcomm/port_api.c \
+    ./rfcomm/rfc_ts_frames.c \
+    ./mcap/mca_dact.c \
+    ./mcap/mca_dsm.c \
+    ./mcap/mca_l2c.c \
+    ./mcap/mca_main.c \
+    ./mcap/mca_csm.c \
+    ./mcap/mca_cact.c \
+    ./mcap/mca_api.c \
+    ./gatt/gatt_sr.c \
+    ./gatt/gatt_cl.c \
+    ./gatt/gatt_api.c \
+    ./gatt/gatt_auth.c \
+    ./gatt/gatt_utils.c \
+    ./gatt/gatt_main.c \
+    ./gatt/att_protocol.c \
+    ./gatt/gatt_attr.c \
+    ./gatt/gatt_db.c \
+    ./avct/avct_api.c \
+    ./avct/avct_l2c.c \
+    ./avct/avct_lcb.c \
+    ./avct/avct_ccb.c \
+    ./avct/avct_lcb_act.c \
+    ./smp/smp_main.c \
+    ./smp/smp_l2c.c \
+    ./smp/smp_cmac.c \
+    ./smp/smp_utils.c \
+    ./smp/smp_act.c \
+    ./smp/smp_keys.c \
+    ./smp/smp_api.c \
+    ./smp/aes.c \
+    ./avdt/avdt_ccb.c \
+    ./avdt/avdt_scb_act.c \
+    ./avdt/avdt_msg.c \
+    ./avdt/avdt_ccb_act.c \
+    ./avdt/avdt_api.c \
+    ./avdt/avdt_scb.c \
+    ./avdt/avdt_ad.c \
+    ./avdt/avdt_l2c.c \
+    ./sdp/sdp_server.c \
+    ./sdp/sdp_main.c \
+    ./sdp/sdp_db.c \
+    ./sdp/sdp_utils.c \
+    ./sdp/sdp_api.c \
+    ./sdp/sdp_discovery.c \
+    ./pan/pan_main.c \
+    ./pan/pan_api.c \
+    ./pan/pan_utils.c \
+    ./btu/btu_hcif.c \
+    ./btu/btu_init.c \
+    ./btu/btu_task.c \
+    ./l2cap/l2c_fcr.c \
+    ./l2cap/l2c_ucd.c \
+    ./l2cap/l2c_main.c \
+    ./l2cap/l2c_api.c \
+    ./l2cap/l2c_utils.c \
+    ./l2cap/l2c_csm.c \
+    ./l2cap/l2c_link.c \
+    ./l2cap/l2c_ble.c
+
+LOCAL_MODULE := libbt-brcm_stack
+LOCAL_MODULE_TAGS := optional
+LOCAL_MODULE_CLASS := STATIC_LIBRARIES
+LOCAL_SHARED_LIBRARIES := libcutils libc
+
+include $(BUILD_STATIC_LIBRARY)
+
+endif  # TARGET_SIMULATOR != true
diff --git a/stack/a2dp/a2d_api.c b/stack/a2dp/a2d_api.c
new file mode 100644
index 0000000..71dcc13
--- /dev/null
+++ b/stack/a2dp/a2d_api.c
@@ -0,0 +1,395 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  ommon API for the Advanced Audio Distribution Profile (A2DP)
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "bt_target.h"
+#include "sdpdefs.h"
+#include "a2d_api.h"
+#include "a2d_int.h"
+#include "avdt_api.h"
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+#if A2D_DYNAMIC_MEMORY == FALSE
+tA2D_CB a2d_cb;
+#endif
+
+
+/******************************************************************************
+**
+** Function         a2d_sdp_cback
+**
+** Description      This is the SDP callback function used by A2D_FindService.
+**                  This function will be executed by SDP when the service
+**                  search is completed.  If the search is successful, it
+**                  finds the first record in the database that matches the
+**                  UUID of the search.  Then retrieves various parameters
+**                  from the record.  When it is finished it calls the
+**                  application callback function.
+**
+** Returns          Nothing.
+**
+******************************************************************************/
+static void a2d_sdp_cback(UINT16 status)
+{
+    tSDP_DISC_REC       *p_rec = NULL;
+    tSDP_DISC_ATTR      *p_attr;
+    BOOLEAN             found = FALSE;
+    tA2D_Service        a2d_svc;
+    tSDP_PROTOCOL_ELEM  elem;
+
+    A2D_TRACE_API1("a2d_sdp_cback status: %d", status);
+
+    if (status == SDP_SUCCESS)
+    {
+        /* loop through all records we found */
+        do
+        {
+            /* get next record; if none found, we're done */
+            if ((p_rec = SDP_FindServiceInDb(a2d_cb.find.p_db,
+                            a2d_cb.find.service_uuid, p_rec)) == NULL)
+            {
+                break;
+            }
+            memset(&a2d_svc, 0, sizeof(tA2D_Service));
+
+            /* get service name */
+            if ((p_attr = SDP_FindAttributeInRec(p_rec,
+                            ATTR_ID_SERVICE_NAME)) != NULL)
+            {
+                a2d_svc.p_service_name = (char *) p_attr->attr_value.v.array;
+                a2d_svc.service_len    = SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+            }
+
+            /* get provider name */
+            if ((p_attr = SDP_FindAttributeInRec(p_rec,
+                            ATTR_ID_PROVIDER_NAME)) != NULL)
+            {
+                a2d_svc.p_provider_name = (char *) p_attr->attr_value.v.array;
+                a2d_svc.provider_len    = SDP_DISC_ATTR_LEN(p_attr->attr_len_type);
+            }
+
+            /* get supported features */
+            if ((p_attr = SDP_FindAttributeInRec(p_rec,
+                            ATTR_ID_SUPPORTED_FEATURES)) != NULL)
+            {
+                a2d_svc.features = p_attr->attr_value.v.u16;
+            }
+
+            /* get AVDTP version */
+            if (SDP_FindProtocolListElemInRec(p_rec, UUID_PROTOCOL_AVDTP, &elem))
+            {
+                a2d_svc.avdt_version = elem.params[0];
+                A2D_TRACE_DEBUG1("avdt_version: 0x%x", a2d_svc.avdt_version);
+            }
+
+            /* we've got everything, we're done */
+            found = TRUE;
+            break;
+
+        } while (TRUE);
+    }
+
+    a2d_cb.find.service_uuid = 0;
+    /* return info from sdp record in app callback function */
+    if (a2d_cb.find.p_cback != NULL)
+    {
+        (*a2d_cb.find.p_cback)(found, &a2d_svc);
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         a2d_set_avdt_sdp_ver
+**
+** Description      This function allows the script wrapper to change the
+**                  avdt version of a2dp.
+**
+** Returns          None
+**
+*******************************************************************************/
+void a2d_set_avdt_sdp_ver (UINT16 avdt_sdp_ver)
+{
+    a2d_cb.avdt_sdp_ver = avdt_sdp_ver;
+}
+
+/******************************************************************************
+**
+** Function         A2D_AddRecord
+**
+** Description      This function is called by a server application to add
+**                  SRC or SNK information to an SDP record.  Prior to
+**                  calling this function the application must call
+**                  SDP_CreateRecord() to create an SDP record.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates SRC or SNK.
+**
+**                      p_service_name:  Pointer to a null-terminated character
+**                      string containing the service name.
+**
+**                      p_provider_name:  Pointer to a null-terminated character
+**                      string containing the provider name.
+**
+**                      features:  Profile supported features.
+**
+**                      sdp_handle:  SDP handle returned by SDP_CreateRecord().
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          A2D_SUCCESS if function execution succeeded,
+**                  A2D_INVALID_PARAMS if bad parameters are given.
+**                  A2D_FAIL if function execution failed.
+**
+******************************************************************************/
+tA2D_STATUS A2D_AddRecord(UINT16 service_uuid, char *p_service_name, char *p_provider_name,
+        UINT16 features, UINT32 sdp_handle)
+{
+    UINT16      browse_list[1];
+    BOOLEAN     result = TRUE;
+    UINT8       temp[8];
+    UINT8       *p;
+    tSDP_PROTOCOL_ELEM  proto_list [A2D_NUM_PROTO_ELEMS];
+
+    A2D_TRACE_API1("A2D_AddRecord uuid: %x", service_uuid);
+
+    if( (sdp_handle == 0) ||
+        (service_uuid != UUID_SERVCLASS_AUDIO_SOURCE && service_uuid != UUID_SERVCLASS_AUDIO_SINK) )
+        return A2D_INVALID_PARAMS;
+
+    /* add service class id list */
+    result &= SDP_AddServiceClassIdList(sdp_handle, 1, &service_uuid);
+
+    memset((void*) proto_list, 0 , A2D_NUM_PROTO_ELEMS*sizeof(tSDP_PROTOCOL_ELEM));
+
+    /* add protocol descriptor list   */
+    proto_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+    proto_list[0].num_params = 1;
+    proto_list[0].params[0] = AVDT_PSM;
+    proto_list[1].protocol_uuid = UUID_PROTOCOL_AVDTP;
+    proto_list[1].num_params = 1;
+    proto_list[1].params[0] = a2d_cb.avdt_sdp_ver;
+
+    result &= SDP_AddProtocolList(sdp_handle, A2D_NUM_PROTO_ELEMS, proto_list);
+
+    /* add profile descriptor list   */
+    result &= SDP_AddProfileDescriptorList(sdp_handle, UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION, A2D_VERSION);
+
+    /* add supported feature */
+    if (features != 0)
+    {
+        p = temp;
+        UINT16_TO_BE_STREAM(p, features);
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE,
+                  (UINT32)2, (UINT8*)temp);
+    }
+
+    /* add provider name */
+    if (p_provider_name != NULL)
+    {
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_PROVIDER_NAME, TEXT_STR_DESC_TYPE,
+                    (UINT32)(strlen(p_provider_name)+1), (UINT8 *) p_provider_name);
+    }
+
+    /* add service name */
+    if (p_service_name != NULL)
+    {
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SERVICE_NAME, TEXT_STR_DESC_TYPE,
+                    (UINT32)(strlen(p_service_name)+1), (UINT8 *) p_service_name);
+    }
+
+    /* add browse group list */
+    browse_list[0] = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    result &= SDP_AddUuidSequence(sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, browse_list);
+
+
+    return (result ? A2D_SUCCESS : A2D_FAIL);
+}
+
+/******************************************************************************
+**
+** Function         A2D_FindService
+**
+** Description      This function is called by a client application to
+**                  perform service discovery and retrieve SRC or SNK SDP
+**                  record information from a server.  Information is
+**                  returned for the first service record found on the
+**                  server that matches the service UUID.  The callback
+**                  function will be executed when service discovery is
+**                  complete.  There can only be one outstanding call to
+**                  A2D_FindService() at a time; the application must wait
+**                  for the callback before it makes another call to
+**                  the function.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates SRC or SNK.
+**
+**                      bd_addr:  BD address of the peer device.
+**
+**                      p_db:  Pointer to the information to initialize
+**                             the discovery database.
+**
+**                      p_cback:  Pointer to the A2D_FindService()
+**                      callback function.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          A2D_SUCCESS if function execution succeeded,
+**                  A2D_INVALID_PARAMS if bad parameters are given.
+**                  A2D_BUSY if discovery is already in progress.
+**                  A2D_FAIL if function execution failed.
+**
+******************************************************************************/
+tA2D_STATUS A2D_FindService(UINT16 service_uuid, BD_ADDR bd_addr,
+                        tA2D_SDP_DB_PARAMS *p_db, tA2D_FIND_CBACK *p_cback)
+{
+    tSDP_UUID   uuid_list;
+    BOOLEAN     result = TRUE;
+    UINT16      a2d_attr_list[] = {ATTR_ID_SERVICE_CLASS_ID_LIST, /* update A2D_NUM_ATTR, if changed */
+                                   ATTR_ID_BT_PROFILE_DESC_LIST,
+                                   ATTR_ID_SUPPORTED_FEATURES,
+                                   ATTR_ID_SERVICE_NAME,
+                                   ATTR_ID_PROTOCOL_DESC_LIST,
+                                   ATTR_ID_PROVIDER_NAME};
+
+    A2D_TRACE_API1("A2D_FindService uuid: %x", service_uuid);
+    if( (service_uuid != UUID_SERVCLASS_AUDIO_SOURCE && service_uuid != UUID_SERVCLASS_AUDIO_SINK) ||
+        p_db == NULL || p_db->p_db == NULL || p_cback == NULL)
+        return A2D_INVALID_PARAMS;
+
+    if( a2d_cb.find.service_uuid == UUID_SERVCLASS_AUDIO_SOURCE ||
+        a2d_cb.find.service_uuid == UUID_SERVCLASS_AUDIO_SINK)
+        return A2D_BUSY;
+
+    /* set up discovery database */
+    uuid_list.len = LEN_UUID_16;
+    uuid_list.uu.uuid16 = service_uuid;
+
+    if(p_db->p_attrs == NULL || p_db->num_attr == 0)
+    {
+        p_db->p_attrs  = a2d_attr_list;
+        p_db->num_attr = A2D_NUM_ATTR;
+    }
+
+    result = SDP_InitDiscoveryDb(p_db->p_db, p_db->db_len, 1, &uuid_list, p_db->num_attr,
+                                 p_db->p_attrs);
+
+    if (result == TRUE)
+    {
+        /* store service_uuid and discovery db pointer */
+        a2d_cb.find.p_db = p_db->p_db;
+        a2d_cb.find.service_uuid = service_uuid;
+        a2d_cb.find.p_cback = p_cback;
+
+        /* perform service search */
+        result = SDP_ServiceSearchAttributeRequest(bd_addr, p_db->p_db, a2d_sdp_cback);
+        if(FALSE == result)
+        {
+            a2d_cb.find.service_uuid = 0;
+        }
+    }
+
+    return (result ? A2D_SUCCESS : A2D_FAIL);
+}
+
+/******************************************************************************
+**
+** Function         A2D_SetTraceLevel
+**
+** Description      Sets the trace level for A2D. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the A2D tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+UINT8 A2D_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        a2d_cb.trace_level = new_level;
+
+    return (a2d_cb.trace_level);
+}
+
+/******************************************************************************
+** Function         A2D_BitsSet
+**
+** Description      Check the given num for the number of bits set
+** Returns          A2D_SET_ONE_BIT, if one and only one bit is set
+**                  A2D_SET_ZERO_BIT, if all bits clear
+**                  A2D_SET_MULTL_BIT, if multiple bits are set
+******************************************************************************/
+UINT8 A2D_BitsSet(UINT8 num)
+{
+    UINT8   count;
+    BOOLEAN res;
+    if(num == 0)
+        res = A2D_SET_ZERO_BIT;
+    else
+    {
+        count = (num & (num - 1));
+        res = ((count==0)?A2D_SET_ONE_BIT:A2D_SET_MULTL_BIT);
+    }
+    return res;
+}
+
+/*******************************************************************************
+**
+** Function         A2D_Init
+**
+** Description      This function is called to initialize the control block
+**                  for this layer.  It must be called before accessing any
+**                  other API functions for this layer.  It is typically called
+**                  once during the start up of the stack.
+**
+** Returns          void
+**
+*******************************************************************************/
+void A2D_Init(void)
+{
+    memset(&a2d_cb, 0, sizeof(tA2D_CB));
+
+    a2d_cb.avdt_sdp_ver = AVDT_VERSION;
+
+#if defined(A2D_INITIAL_TRACE_LEVEL)
+    a2d_cb.trace_level  = A2D_INITIAL_TRACE_LEVEL;
+#else
+    a2d_cb.trace_level  = BT_TRACE_LEVEL_NONE;
+#endif
+}
+
diff --git a/stack/a2dp/a2d_int.h b/stack/a2dp/a2d_int.h
new file mode 100644
index 0000000..4aaa083
--- /dev/null
+++ b/stack/a2dp/a2d_int.h
@@ -0,0 +1,83 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  2DP internal header file
+ *
+ ******************************************************************************/
+#ifndef A2D_INT_H
+#define A2D_INT_H
+
+#include "a2d_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+#define A2D_VERSION             0x0102
+
+/* Number of attributes in A2D SDP record. */
+#define A2D_NUM_ATTR            6
+
+/* Number of protocol elements in protocol element list. */
+#define A2D_NUM_PROTO_ELEMS     2
+
+/*****************************************************************************
+**  Type definitions
+*****************************************************************************/
+
+/* Control block used by A2D_FindService(). */
+typedef struct
+{
+    tA2D_FIND_CBACK     *p_cback;       /* pointer to application callback */
+    tSDP_DISCOVERY_DB   *p_db;          /* pointer to discovery database */
+    UINT16              service_uuid;   /* service UUID of search */
+} tA2D_FIND_CB;
+
+typedef struct
+{
+    tA2D_FIND_CB    find;   /* find service control block */
+    UINT8           trace_level;
+    BOOLEAN         use_desc;
+    UINT16          avdt_sdp_ver;   /* AVDTP version */
+} tA2D_CB;
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+#if A2D_DYNAMIC_MEMORY == FALSE
+A2D_API extern tA2D_CB  a2d_cb;
+#else
+A2D_API extern tA2D_CB *a2d_cb_ptr;
+#define a2d_cb (*a2d_cb_ptr)
+#endif
+
+/* Used only for conformance testing */
+A2D_API extern void a2d_set_avdt_sdp_ver (UINT16 avdt_sdp_ver);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* A2D_INT_H */
diff --git a/stack/a2dp/a2d_sbc.c b/stack/a2dp/a2d_sbc.c
new file mode 100644
index 0000000..a4e5255
--- /dev/null
+++ b/stack/a2dp/a2d_sbc.c
@@ -0,0 +1,401 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Utility functions to help build and parse SBC Codec Information Element
+ *  and Media Payload.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if (A2D_SBC_INCLUDED == TRUE)
+#include <string.h>
+#include "a2d_api.h"
+#include "a2d_int.h"
+#include "a2d_sbc.h"
+
+/*************************************************************************************************
+ * SBC descramble code
+ * Purpose: to tie the SBC code with BTE/mobile stack code,
+ *          especially for the case when the SBC is ported into a third-party Multimedia chip
+ *
+ * Algorithm:
+ *  init process: all counters reset to 0,
+ *                calculate base_index: (6 + s16NumOfChannels*s16NumOfSubBands/2)
+ *    scramble side:    the init process happens every time SBC_Encoder_Init() is called.
+ *    descramble side:  it would be nice to know if he "init" process has happened.
+ *                      alter the SBC SYNC word 0x9C (1001 1100) to 0x8C (1000 1100).
+ *
+ *  scramble process:
+ *    The CRC byte:
+ *    Every SBC frame has a frame header.
+ *    The 1st byte is the sync word and the following 2 bytes are about the stream format.
+ *    They are supposed to be "constant" within a "song"
+ *    The 4th byte is the CRC byte. The CRC byte is bound to be random.
+ *    Derive 2 items from the CRC byte; one is the "use" bit, the other is the "index".
+ *
+ *    SBC keeps 2 sets of "use" & "index"; derived the current and the previous frame.
+ *
+ *    The "use" bit is any bit in SBC_PRTC_USE_MASK is set.
+ *    If set, SBC uses the "index" from the current frame.
+ *    If not set, SBC uses the "index" from the previous frame or 0.
+ *
+ *    index = (CRC & 0x3) + ((CRC & 0x30) >> 2) // 8 is the max index
+ *
+ *    if(index > 0)
+ *    {
+ *        p = &u8frame[base_index];
+ *        if((index&1)&&(u16PacketLength > (base_index+index*2)))
+ *        {
+ *            // odd index: swap 2 bytes
+ *            tmp = p[index];
+ *            p[index] = p[index*2];
+ *            p[index*2] = tmp;
+ *        }
+ *        else
+ *        {
+ *            // even index: shift by 3
+ *            tmp = (p[index] >> 3) + (p[index] << 5);
+ *            p[index] = tmp;
+ *        }
+ *    }
+ *    //else index is 0. The frame stays unaltered
+ *
+ */
+#define A2D_SBC_SYNC_WORD       0x9C
+#define A2D_SBC_CRC_IDX         3
+#define A2D_SBC_USE_MASK        0x64
+#define A2D_SBC_SYNC_MASK       0x10
+#define A2D_SBC_CIDX            0
+#define A2D_SBC_LIDX            1
+#define A2D_SBC_CH_M_BITS       0xC /* channel mode bits: 0: mono; 1 ch */
+#define A2D_SBC_SUBBAND_BIT     0x1 /* num of subband bit: 0:4; 1: 8 */
+
+#define A2D_SBC_GET_IDX(sc) (((sc) & 0x3) + (((sc) & 0x30) >> 2))
+
+typedef struct
+{
+    UINT8   use;
+    UINT8   idx;
+} tA2D_SBC_FR_CB;
+
+typedef struct
+{
+    tA2D_SBC_FR_CB  fr[2];
+    UINT8           index;
+    UINT8           base;
+} tA2D_SBC_DS_CB;
+
+static tA2D_SBC_DS_CB a2d_sbc_ds_cb;
+/*int a2d_count = 0;*/
+/******************************************************************************
+**
+** Function         A2D_SbcChkFrInit
+**
+** Description      check if need to init the descramble control block.
+**
+** Returns          nothing.
+******************************************************************************/
+void A2D_SbcChkFrInit(UINT8 *p_pkt)
+{
+    UINT8   fmt;
+    UINT8   num_chnl = 1;
+    UINT8   num_subband = 4;
+
+    if((p_pkt[0] & A2D_SBC_SYNC_MASK) == 0)
+    {
+        a2d_cb.use_desc = TRUE;
+        fmt = p_pkt[1];
+        p_pkt[0] |= A2D_SBC_SYNC_MASK;
+        memset(&a2d_sbc_ds_cb, 0, sizeof(tA2D_SBC_DS_CB));
+        if(fmt & A2D_SBC_CH_M_BITS)
+            num_chnl = 2;
+        if(fmt & A2D_SBC_SUBBAND_BIT)
+            num_subband = 8;
+        a2d_sbc_ds_cb.base = 6 + num_chnl*num_subband/2;
+        /*printf("base: %d\n", a2d_sbc_ds_cb.base);
+        a2d_count = 0;*/
+    }
+}
+
+/******************************************************************************
+**
+** Function         A2D_SbcDescramble
+**
+** Description      descramble the packet.
+**
+** Returns          nothing.
+******************************************************************************/
+void A2D_SbcDescramble(UINT8 *p_pkt, UINT16 len)
+{
+    tA2D_SBC_FR_CB *p_cur, *p_last;
+    UINT32   idx, tmp, tmp2;
+
+    if(a2d_cb.use_desc)
+    {
+        /* c2l */
+        p_last  = &a2d_sbc_ds_cb.fr[A2D_SBC_LIDX];
+        p_cur   = &a2d_sbc_ds_cb.fr[A2D_SBC_CIDX];
+        p_last->idx = p_cur->idx;
+        p_last->use = p_cur->use;
+        /* getc */
+        p_cur->use = p_pkt[A2D_SBC_CRC_IDX] & A2D_SBC_USE_MASK;
+        p_cur->idx = A2D_SBC_GET_IDX(p_pkt[A2D_SBC_CRC_IDX]);
+        a2d_sbc_ds_cb.index = (p_cur->use)?A2D_SBC_CIDX:A2D_SBC_LIDX;
+        /*
+        printf("%05d: ar[%02d]: x%02x, msk: x%02x, use: %s, idx: %02d, ",
+            a2d_count++,
+            A2D_SBC_CRC_IDX, p_pkt[A2D_SBC_CRC_IDX], A2D_SBC_USE_MASK,
+            (p_cur->use)?"cur":"lst", p_cur->idx);
+        */
+        /* descramble */
+        idx = a2d_sbc_ds_cb.fr[a2d_sbc_ds_cb.index].idx;
+        if(idx > 0)
+        {
+            p_pkt = &p_pkt[a2d_sbc_ds_cb.base];
+            if((idx&1) && (len > (a2d_sbc_ds_cb.base+(idx<<1))))
+            {
+                tmp2        = (idx<<1);
+                tmp         = p_pkt[idx];
+                p_pkt[idx]  = p_pkt[tmp2];
+                p_pkt[tmp2]  = tmp;
+                /*
+                printf("tmp2: %02d, len: %d, idx: %d\n",
+                    tmp2, len, a2d_sbc_ds_cb.fr[a2d_sbc_ds_cb.index].idx);
+                    */
+            }
+            else
+            {
+                tmp2        = p_pkt[idx];
+                tmp         = (tmp2>>3)+(tmp2<<5);
+                p_pkt[idx]  = (UINT8)tmp;
+                /*
+                printf("tmp: x%02x, len: %d, idx: %d(cmp:%d)\n",
+                    (UINT8)tmp2, len, a2d_sbc_ds_cb.fr[a2d_sbc_ds_cb.index].idx,
+                    (a2d_sbc_ds_cb.base+(idx<<1)));
+                    */
+            }
+        }
+        /*
+        else
+        {
+            printf("!!!!\n");
+        }
+        */
+    }
+}
+
+/******************************************************************************
+**
+** Function         A2D_BldSbcInfo
+**
+** Description      This function is called by an application to build
+**                  the SBC Media Codec Capabilities byte sequence
+**                  beginning from the LOSC octet.
+**                  Input Parameters:
+**                      media_type:  Indicates Audio, or Multimedia.
+**
+**                      p_ie:  The SBC Codec Information Element information.
+**
+**                  Output Parameters:
+**                      p_result:  the resulting codec info byte sequence.
+**
+** Returns          A2D_SUCCESS if function execution succeeded.
+**                  Error status code, otherwise.
+******************************************************************************/
+tA2D_STATUS A2D_BldSbcInfo(UINT8 media_type, tA2D_SBC_CIE *p_ie, UINT8 *p_result)
+{
+    tA2D_STATUS status;
+
+    if( p_ie == NULL || p_result == NULL ||
+        (p_ie->samp_freq & ~A2D_SBC_IE_SAMP_FREQ_MSK) ||
+        (p_ie->ch_mode & ~A2D_SBC_IE_CH_MD_MSK) ||
+        (p_ie->block_len & ~A2D_SBC_IE_BLOCKS_MSK) ||
+        (p_ie->num_subbands & ~A2D_SBC_IE_SUBBAND_MSK) ||
+        (p_ie->alloc_mthd & ~A2D_SBC_IE_ALLOC_MD_MSK) ||
+        (p_ie->max_bitpool < p_ie->min_bitpool) ||
+        (p_ie->max_bitpool < A2D_SBC_IE_MIN_BITPOOL) ||
+        (p_ie->max_bitpool > A2D_SBC_IE_MAX_BITPOOL) ||
+        (p_ie->min_bitpool < A2D_SBC_IE_MIN_BITPOOL) ||
+        (p_ie->min_bitpool > A2D_SBC_IE_MAX_BITPOOL) )
+    {
+        /* if any unused bit is set */
+        status = A2D_INVALID_PARAMS;
+    }
+    else
+    {
+        status = A2D_SUCCESS;
+        *p_result++ = A2D_SBC_INFO_LEN;
+        *p_result++ = media_type;
+        *p_result++ = A2D_MEDIA_CT_SBC;
+
+        /* Media Codec Specific Information Element */
+        *p_result++ = p_ie->samp_freq | p_ie->ch_mode;
+
+        *p_result++ = p_ie->block_len | p_ie->num_subbands | p_ie->alloc_mthd;
+
+        *p_result++ = p_ie->min_bitpool;
+        *p_result   = p_ie->max_bitpool;
+    }
+    return status;
+}
+
+/******************************************************************************
+**
+** Function         A2D_ParsSbcInfo
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Codec Capabilities byte sequence
+**                  beginning from the LOSC octet.
+**                  Input Parameters:
+**                      p_info:  the byte sequence to parse.
+**
+**                      for_caps:  TRUE, if the byte sequence is for get capabilities response.
+**
+**                  Output Parameters:
+**                      p_ie:  The SBC Codec Information Element information.
+**
+** Returns          A2D_SUCCESS if function execution succeeded.
+**                  Error status code, otherwise.
+******************************************************************************/
+tA2D_STATUS A2D_ParsSbcInfo(tA2D_SBC_CIE *p_ie, UINT8 *p_info, BOOLEAN for_caps)
+{
+    tA2D_STATUS status;
+    UINT8   losc;
+    UINT8   mt;
+
+    if( p_ie == NULL || p_info == NULL)
+        status = A2D_INVALID_PARAMS;
+    else
+    {
+        losc    = *p_info++;
+        mt      = *p_info++;
+        /* If the function is called for the wrong Media Type or Media Codec Type */
+        if(losc != A2D_SBC_INFO_LEN || *p_info != A2D_MEDIA_CT_SBC)
+            status = A2D_WRONG_CODEC;
+        else
+        {
+            p_info++;
+            p_ie->samp_freq = *p_info & A2D_SBC_IE_SAMP_FREQ_MSK;
+            p_ie->ch_mode   = *p_info & A2D_SBC_IE_CH_MD_MSK;
+            p_info++;
+            p_ie->block_len     = *p_info & A2D_SBC_IE_BLOCKS_MSK;
+            p_ie->num_subbands  = *p_info & A2D_SBC_IE_SUBBAND_MSK;
+            p_ie->alloc_mthd    = *p_info & A2D_SBC_IE_ALLOC_MD_MSK;
+            p_info++;
+            p_ie->min_bitpool = *p_info++;
+            p_ie->max_bitpool = *p_info;
+            status = A2D_SUCCESS;
+            if(p_ie->min_bitpool < A2D_SBC_IE_MIN_BITPOOL || p_ie->min_bitpool > A2D_SBC_IE_MAX_BITPOOL )
+                status = A2D_BAD_MIN_BITPOOL;
+
+            if(p_ie->max_bitpool < A2D_SBC_IE_MIN_BITPOOL || p_ie->max_bitpool > A2D_SBC_IE_MAX_BITPOOL ||
+                p_ie->max_bitpool < p_ie->min_bitpool)
+                status = A2D_BAD_MAX_BITPOOL;
+
+            if(for_caps == FALSE)
+            {
+                if(A2D_BitsSet(p_ie->samp_freq) != A2D_SET_ONE_BIT)
+                    status = A2D_BAD_SAMP_FREQ;
+                if(A2D_BitsSet(p_ie->ch_mode) != A2D_SET_ONE_BIT)
+                    status = A2D_BAD_CH_MODE;
+                if(A2D_BitsSet(p_ie->block_len) != A2D_SET_ONE_BIT)
+                    status = A2D_BAD_BLOCK_LEN;
+                if(A2D_BitsSet(p_ie->num_subbands) != A2D_SET_ONE_BIT)
+                    status = A2D_BAD_SUBBANDS;
+                if(A2D_BitsSet(p_ie->alloc_mthd) != A2D_SET_ONE_BIT)
+                    status = A2D_BAD_ALLOC_MTHD;
+            }
+        }
+    }
+    return status;
+}
+
+/******************************************************************************
+**
+** Function         A2D_BldSbcMplHdr
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Payload header.
+**                  Input Parameters:
+**                      frag:  1, if fragmented. 0, otherwise.
+**
+**                      start:  1, if the starting packet of a fragmented frame.
+**
+**                      last:  1, if the last packet of a fragmented frame.
+**
+**                      num:  If frag is 1, this is the number of remaining fragments
+**                            (including this fragment) of this frame.
+**                            If frag is 0, this is the number of frames in this packet.
+**
+**                  Output Parameters:
+**                      p_dst:  the resulting media payload header byte sequence.
+**
+** Returns          void.
+******************************************************************************/
+void A2D_BldSbcMplHdr(UINT8 *p_dst, BOOLEAN frag, BOOLEAN start, BOOLEAN last, UINT8 num)
+{
+    if(p_dst)
+    {
+        *p_dst  = 0;
+        if(frag)
+            *p_dst  |= A2D_SBC_HDR_F_MSK;
+        if(start)
+            *p_dst  |= A2D_SBC_HDR_S_MSK;
+        if(last)
+            *p_dst  |= A2D_SBC_HDR_L_MSK;
+        *p_dst  |= (A2D_SBC_HDR_NUM_MSK & num);
+    }
+}
+
+/******************************************************************************
+**
+** Function         A2D_ParsSbcMplHdr
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Payload header.
+**                  Input Parameters:
+**                      p_src:  the byte sequence to parse..
+**
+**                  Output Parameters:
+**                      frag:  1, if fragmented. 0, otherwise.
+**
+**                      start:  1, if the starting packet of a fragmented frame.
+**
+**                      last:  1, if the last packet of a fragmented frame.
+**
+**                      num:  If frag is 1, this is the number of remaining fragments
+**                            (including this fragment) of this frame.
+**                            If frag is 0, this is the number of frames in this packet.
+**
+** Returns          void.
+******************************************************************************/
+void A2D_ParsSbcMplHdr(UINT8 *p_src, BOOLEAN *p_frag, BOOLEAN *p_start, BOOLEAN *p_last, UINT8 *p_num)
+{
+    if(p_src && p_frag && p_start && p_last && p_num)
+    {
+        *p_frag = (*p_src & A2D_SBC_HDR_F_MSK) ? TRUE: FALSE;
+        *p_start= (*p_src & A2D_SBC_HDR_S_MSK) ? TRUE: FALSE;
+        *p_last = (*p_src & A2D_SBC_HDR_L_MSK) ? TRUE: FALSE;
+        *p_num  = (*p_src & A2D_SBC_HDR_NUM_MSK);
+    }
+}
+
+#endif /* A2D_SBC_INCLUDED == TRUE */
diff --git a/stack/avct/avct_api.c b/stack/avct/avct_api.c
new file mode 100644
index 0000000..7e37a90
--- /dev/null
+++ b/stack/avct/avct_api.c
@@ -0,0 +1,465 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains API of the audio/video control transport protocol.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "gki.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "btm_api.h"
+#include "avct_api.h"
+#include "avct_int.h"
+
+/* Control block for AVCT */
+#if AVCT_DYNAMIC_MEMORY == FALSE
+tAVCT_CB avct_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         AVCT_Register
+**
+** Description      This is the system level registration function for the
+**                  AVCTP protocol.  This function initializes AVCTP and
+**                  prepares the protocol stack for its use.  This function
+**                  must be called once by the system or platform using AVCTP
+**                  before the other functions of the API an be used.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask)
+{
+    AVCT_TRACE_API0("AVCT_Register");
+
+    /* register PSM with L2CAP */
+    L2CA_Register(AVCT_PSM, (tL2CAP_APPL_INFO *) &avct_l2c_appl);
+
+    /* set security level */
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVCTP, sec_mask, AVCT_PSM, 0, 0);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVCTP, sec_mask, AVCT_PSM, 0, 0);
+
+    /* initialize AVCTP data structures */
+    memset(&avct_cb, 0, sizeof(tAVCT_CB));
+
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    /* Include the browsing channel which uses eFCR */
+    L2CA_Register(AVCT_BR_PSM, (tL2CAP_APPL_INFO *) &avct_l2c_br_appl);
+
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVCTP_BROWSE, sec_mask, AVCT_BR_PSM, 0, 0);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVCTP_BROWSE, sec_mask, AVCT_BR_PSM, 0, 0);
+
+    if (mtu_br < AVCT_MIN_BROWSE_MTU)
+        mtu_br = AVCT_MIN_BROWSE_MTU;
+    avct_cb.mtu_br = mtu_br;
+#endif
+
+#if defined(AVCT_INITIAL_TRACE_LEVEL)
+    avct_cb.trace_level = AVCT_INITIAL_TRACE_LEVEL;
+#else
+    avct_cb.trace_level = BT_TRACE_LEVEL_NONE;
+#endif
+
+    if (mtu < AVCT_MIN_CONTROL_MTU)
+        mtu = AVCT_MIN_CONTROL_MTU;
+    /* store mtu */
+    avct_cb.mtu = mtu;
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_Deregister
+**
+** Description      This function is called to deregister use AVCTP protocol.
+**                  It is called when AVCTP is no longer being used by any
+**                  application in the system.  Before this function can be
+**                  called, all connections must be removed with
+**                  AVCT_RemoveConn().
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void AVCT_Deregister(void)
+{
+    AVCT_TRACE_API0("AVCT_Deregister");
+
+    /* deregister PSM with L2CAP */
+    L2CA_Deregister(AVCT_PSM);
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_CreateConn
+**
+** Description      Create an AVCTP connection.  There are two types of
+**                  connections, initiator and acceptor, as determined by
+**                  the p_cc->role parameter.  When this function is called to
+**                  create an initiator connection, an AVCTP connection to
+**                  the peer device is initiated if one does not already exist.
+**                  If an acceptor connection is created, the connection waits
+**                  passively for an incoming AVCTP connection from a peer device.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVCT_CreateConn(UINT8 *p_handle, tAVCT_CC *p_cc, BD_ADDR peer_addr)
+{
+    UINT16      result = AVCT_SUCCESS;
+    tAVCT_CCB   *p_ccb;
+    tAVCT_LCB   *p_lcb;
+
+    AVCT_TRACE_API2("AVCT_CreateConn: %d, control:%d", p_cc->role, p_cc->control);
+
+    /* Allocate ccb; if no ccbs, return failure */
+    if ((p_ccb = avct_ccb_alloc(p_cc)) == NULL)
+    {
+        result = AVCT_NO_RESOURCES;
+    }
+    else
+    {
+        /* get handle */
+        *p_handle = avct_ccb_to_idx(p_ccb);
+
+        /* if initiator connection */
+        if (p_cc->role == AVCT_INT)
+        {
+            /* find link; if none allocate a new one */
+            if ((p_lcb = avct_lcb_by_bd(peer_addr)) == NULL)
+            {
+                if ((p_lcb = avct_lcb_alloc(peer_addr)) == NULL)
+                {
+                    /* no link resources; free ccb as well */
+                    avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
+                    result = AVCT_NO_RESOURCES;
+                }
+            }
+            /* check if PID already in use */
+            else if (avct_lcb_has_pid(p_lcb, p_cc->pid))
+            {
+                avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
+                result = AVCT_PID_IN_USE;
+            }
+
+            if (result == AVCT_SUCCESS)
+            {
+                /* bind lcb to ccb */
+                p_ccb->p_lcb = p_lcb;
+                AVCT_TRACE_DEBUG1("ch_state: %d", p_lcb->ch_state);
+                avct_lcb_event(p_lcb, AVCT_LCB_UL_BIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
+            }
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_RemoveConn
+**
+** Description      Remove an AVCTP connection.  This function is called when
+**                  the application is no longer using a connection.  If this
+**                  is the last connection to a peer the L2CAP channel for AVCTP
+**                  will be closed.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVCT_RemoveConn(UINT8 handle)
+{
+    UINT16              result = AVCT_SUCCESS;
+    tAVCT_CCB           *p_ccb;
+
+    AVCT_TRACE_API0("AVCT_RemoveConn");
+
+    /* map handle to ccb */
+    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
+    {
+        result = AVCT_BAD_HANDLE;
+    }
+    /* if connection not bound to lcb, dealloc */
+    else if (p_ccb->p_lcb == NULL)
+    {
+        avct_ccb_dealloc(p_ccb, AVCT_NO_EVT, 0, NULL);
+    }
+    /* send unbind event to lcb */
+    else
+    {
+        avct_lcb_event(p_ccb->p_lcb, AVCT_LCB_UL_UNBIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_CreateBrowse
+**
+** Description      Create an AVCTP Browse channel.  There are two types of
+**                  connections, initiator and acceptor, as determined by
+**                  the role parameter.  When this function is called to
+**                  create an initiator connection, the Browse channel to
+**                  the peer device is initiated if one does not already exist.
+**                  If an acceptor connection is created, the connection waits
+**                  passively for an incoming AVCTP connection from a peer device.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVCT_CreateBrowse (UINT8 handle, UINT8 role)
+{
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    UINT16      result = AVCT_SUCCESS;
+    tAVCT_CCB   *p_ccb;
+    tAVCT_BCB   *p_bcb;
+    int         index;
+
+    AVCT_TRACE_API1("AVCT_CreateBrowse: %d", role);
+
+    /* map handle to ccb */
+    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
+    {
+        return AVCT_BAD_HANDLE;
+    }
+    else
+    {
+        /* mark this CCB as supporting browsing channel */
+        if ((p_ccb->allocated & AVCT_ALOC_BCB) == 0)
+        {
+            p_ccb->allocated |= AVCT_ALOC_BCB;
+        }
+    }
+
+    /* if initiator connection */
+    if (role == AVCT_INT)
+    {
+        /* the link control block must exist before this function is called as INT. */
+        if (p_ccb->p_lcb == NULL)
+        {
+            result = AVCT_NOT_OPEN;
+        }
+        else
+        {
+            /* find link; if none allocate a new one */
+            index = p_ccb->p_lcb->allocated;
+            if (index > AVCT_NUM_LINKS)
+            {
+                result = AVCT_BAD_HANDLE;
+            }
+            else
+            {
+                p_bcb = &avct_cb.bcb[index - 1];
+                p_bcb->allocated = index;
+            }
+        }
+
+        if (result == AVCT_SUCCESS)
+        {
+            /* bind bcb to ccb */
+            p_ccb->p_bcb = p_bcb;
+            AVCT_TRACE_DEBUG1("ch_state: %d", p_bcb->ch_state);
+            avct_bcb_event(p_bcb, AVCT_LCB_UL_BIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
+        }
+    }
+
+    return result;
+#else
+    return AVCT_NO_RESOURCES;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_RemoveBrowse
+**
+** Description      Remove an AVCTP Browse channel.  This function is called when
+**                  the application is no longer using a connection.  If this
+**                  is the last connection to a peer the L2CAP channel for AVCTP
+**                  will be closed.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVCT_RemoveBrowse (UINT8 handle)
+{
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    UINT16              result = AVCT_SUCCESS;
+    tAVCT_CCB           *p_ccb;
+
+    AVCT_TRACE_API0("AVCT_RemoveBrowse");
+
+    /* map handle to ccb */
+    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
+    {
+        result = AVCT_BAD_HANDLE;
+    }
+    else if (p_ccb->p_bcb != NULL)
+    /* send unbind event to bcb */
+    {
+        avct_bcb_event(p_ccb->p_bcb, AVCT_LCB_UL_UNBIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
+    }
+    return result;
+#else
+    return AVCT_NO_RESOURCES;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_GetBrowseMtu
+**
+** Description      Get the peer_mtu for the AVCTP Browse channel of the given
+**                  connection.
+**
+** Returns          the peer browsing channel MTU.
+**
+*******************************************************************************/
+UINT16 AVCT_GetBrowseMtu (UINT8 handle)
+{
+    UINT16  peer_mtu = AVCT_MIN_BROWSE_MTU;
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    tAVCT_CCB           *p_ccb;
+
+    if ((p_ccb = avct_ccb_by_idx(handle)) != NULL && p_ccb->p_bcb != NULL)
+    {
+        peer_mtu = p_ccb->p_bcb->peer_mtu;
+    }
+#endif
+    return peer_mtu;
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_GetPeerMtu
+**
+** Description      Get the peer_mtu for the AVCTP channel of the given
+**                  connection.
+**
+** Returns          the peer MTU size.
+**
+*******************************************************************************/
+UINT16 AVCT_GetPeerMtu (UINT8 handle)
+{
+    UINT16      peer_mtu = L2CAP_DEFAULT_MTU;
+    tAVCT_CCB   *p_ccb;
+
+    /* map handle to ccb */
+    if ((p_ccb = avct_ccb_by_idx(handle)) != NULL)
+    {
+        if (p_ccb->p_lcb)
+        {
+            peer_mtu = p_ccb->p_lcb->peer_mtu;
+        }
+    }
+
+    return peer_mtu;
+}
+
+/*******************************************************************************
+**
+** Function         AVCT_MsgReq
+**
+** Description      Send an AVCTP message to a peer device.  In calling
+**                  AVCT_MsgReq(), the application should keep track of the
+**                  congestion state of AVCTP as communicated with events
+**                  AVCT_CONG_IND_EVT and AVCT_UNCONG_IND_EVT.   If the
+**                  application calls AVCT_MsgReq() when AVCTP is congested
+**                  the message may be discarded.  The application may make its
+**                  first call to AVCT_MsgReq() after it receives an
+**                  AVCT_CONNECT_CFM_EVT or AVCT_CONNECT_IND_EVT on control channel or
+**                  AVCT_BROWSE_CONN_CFM_EVT or AVCT_BROWSE_CONN_IND_EVT on browsing channel.
+**
+**                  p_msg->layer_specific must be set to
+**                  AVCT_DATA_CTRL for control channel traffic;
+**                  AVCT_DATA_BROWSE for for browse channel traffic.
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVCT_MsgReq(UINT8 handle, UINT8 label, UINT8 cr, BT_HDR *p_msg)
+{
+    UINT16          result = AVCT_SUCCESS;
+    tAVCT_CCB       *p_ccb;
+    tAVCT_UL_MSG    ul_msg;
+
+    AVCT_TRACE_API0("AVCT_MsgReq");
+
+    /* verify p_msg parameter */
+    if (p_msg == NULL)
+    {
+        return AVCT_NO_RESOURCES;
+    }
+    AVCT_TRACE_API1("len: %d", p_msg->len);
+
+    /* map handle to ccb */
+    if ((p_ccb = avct_ccb_by_idx(handle)) == NULL)
+    {
+        result = AVCT_BAD_HANDLE;
+        GKI_freebuf(p_msg);
+    }
+    /* verify channel is bound to link */
+    else if (p_ccb->p_lcb == NULL)
+    {
+        result = AVCT_NOT_OPEN;
+        GKI_freebuf(p_msg);
+    }
+
+    if (result == AVCT_SUCCESS)
+    {
+        ul_msg.p_buf = p_msg;
+        ul_msg.p_ccb = p_ccb;
+        ul_msg.label = label;
+        ul_msg.cr = cr;
+
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+        /* send msg event to bcb */
+        if (p_msg->layer_specific == AVCT_DATA_BROWSE)
+        {
+            if (p_ccb->p_bcb == NULL && (p_ccb->allocated & AVCT_ALOC_BCB) == 0)
+            {
+                /* BCB channel is not open and not allocated */
+                result = AVCT_BAD_HANDLE;
+                GKI_freebuf(p_msg);
+            }
+            else
+            {
+                p_ccb->p_bcb = avct_bcb_by_lcb(p_ccb->p_lcb);
+                avct_bcb_event(p_ccb->p_bcb, AVCT_LCB_UL_MSG_EVT, (tAVCT_LCB_EVT *) &ul_msg);
+            }
+        }
+        /* send msg event to lcb */
+        else
+#endif
+        {
+            avct_lcb_event(p_ccb->p_lcb, AVCT_LCB_UL_MSG_EVT, (tAVCT_LCB_EVT *) &ul_msg);
+        }
+    }
+    return result;
+}
+
diff --git a/stack/avct/avct_ccb.c b/stack/avct/avct_ccb.c
new file mode 100644
index 0000000..09051b1
--- /dev/null
+++ b/stack/avct/avct_ccb.c
@@ -0,0 +1,150 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains functions which operate on the AVCTP connection
+ *  control block.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avct_api.h"
+#include "avct_int.h"
+
+/*******************************************************************************
+**
+** Function         avct_ccb_alloc
+**
+** Description      Allocate a connection control block; copy parameters to ccb.
+**
+**
+** Returns          pointer to the ccb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+tAVCT_CCB *avct_ccb_alloc(tAVCT_CC *p_cc)
+{
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (!p_ccb->allocated)
+        {
+            p_ccb->allocated = AVCT_ALOC_LCB;
+            memcpy(&p_ccb->cc, p_cc, sizeof(tAVCT_CC));
+            AVCT_TRACE_DEBUG1("avct_ccb_alloc %d", i);
+            break;
+        }
+    }
+
+    if (i == AVCT_NUM_CONN)
+    {
+        /* out of ccbs */
+        p_ccb = NULL;
+        AVCT_TRACE_WARNING0("Out of ccbs");
+    }
+    return p_ccb;
+}
+
+/*******************************************************************************
+**
+** Function         avct_ccb_dealloc
+**
+** Description      Deallocate a connection control block and call application
+**                  callback.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avct_ccb_dealloc(tAVCT_CCB *p_ccb, UINT8 event, UINT16 result, BD_ADDR bd_addr)
+{
+    tAVCT_CTRL_CBACK    *p_cback = p_ccb->cc.p_ctrl_cback;
+
+    AVCT_TRACE_DEBUG1("avct_ccb_dealloc %d", avct_ccb_to_idx(p_ccb));
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    if(p_ccb->p_bcb == NULL)
+        memset(p_ccb, 0, sizeof(tAVCT_CCB));
+    else
+    {
+        /* control channel is down, but the browsing channel is still connected 0 disconnect it now */
+        avct_bcb_event(p_ccb->p_bcb, AVCT_LCB_UL_UNBIND_EVT, (tAVCT_LCB_EVT *) &p_ccb);
+        p_ccb->p_lcb = NULL;
+    }
+#else
+    memset(p_ccb, 0, sizeof(tAVCT_CCB));
+#endif
+
+    if (event != AVCT_NO_EVT)
+    {
+        (*p_cback)(avct_ccb_to_idx(p_ccb), event, result, bd_addr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_ccb_to_idx
+**
+** Description      Given a pointer to an ccb, return its index.
+**
+**
+** Returns          Index of ccb.
+**
+*******************************************************************************/
+UINT8 avct_ccb_to_idx(tAVCT_CCB *p_ccb)
+{
+    /* use array arithmetic to determine index */
+    return (UINT8) (p_ccb - avct_cb.ccb);
+}
+
+/*******************************************************************************
+**
+** Function         avct_ccb_by_idx
+**
+** Description      Return ccb pointer based on ccb index (or handle).
+**
+**
+** Returns          pointer to the ccb, or NULL if none found.
+**
+*******************************************************************************/
+tAVCT_CCB *avct_ccb_by_idx(UINT8 idx)
+{
+    tAVCT_CCB   *p_ccb;
+
+    /* verify index */
+    if (idx < AVCT_NUM_CONN)
+    {
+        p_ccb = &avct_cb.ccb[idx];
+
+        /* verify ccb is allocated */
+        if (!p_ccb->allocated)
+        {
+            p_ccb = NULL;
+            AVCT_TRACE_WARNING1("ccb %d not allocated", idx);
+        }
+    }
+    else
+    {
+        p_ccb = NULL;
+        AVCT_TRACE_WARNING1("No ccb for idx %d", idx);
+    }
+    return p_ccb;
+}
diff --git a/stack/avct/avct_defs.h b/stack/avct/avct_defs.h
new file mode 100644
index 0000000..30b8859
--- /dev/null
+++ b/stack/avct/avct_defs.h
@@ -0,0 +1,62 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This contains constants definitions and other information from the AVCTP
+ *  specification.  This file is intended for use internal to AVCT only.
+ *
+ ******************************************************************************/
+#ifndef AVCT_DEFS_H
+#define AVCT_DEFS_H
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* packet type */
+#define AVCT_PKT_TYPE_SINGLE        0       /* single packet */
+#define AVCT_PKT_TYPE_START         1       /* start packet */
+#define AVCT_PKT_TYPE_CONT          2       /* continue packet */
+#define AVCT_PKT_TYPE_END           3       /* end packet */
+
+/* header lengths for different packet types */
+#define AVCT_HDR_LEN_SINGLE         3
+#define AVCT_HDR_LEN_START          4
+#define AVCT_HDR_LEN_CONT           1
+#define AVCT_HDR_LEN_END            1
+
+/* invalid cr+ipid value */
+#define AVCT_CR_IPID_INVALID        1
+
+/*****************************************************************************
+** message parsing and building macros
+*****************************************************************************/
+
+#define AVCT_BLD_HDR(p, label, type, cr_ipid) \
+    *(p)++ = ((label) << 4) | ((type) << 2) | (cr_ipid);
+
+#define AVCT_PRS_HDR(p, label, type, cr_ipid) \
+    label = *(p) >> 4; \
+    type = (*(p) >> 2) & 3; \
+    cr_ipid = *(p)++ & 3;
+
+#define AVCT_PRS_PKT_TYPE(p, type) \
+    type = (*(p) >> 2) & 3;
+
+#endif /* AVCT_DEFS_H */
diff --git a/stack/avct/avct_int.h b/stack/avct/avct_int.h
new file mode 100644
index 0000000..b93c032
--- /dev/null
+++ b/stack/avct/avct_int.h
@@ -0,0 +1,239 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains interfaces which are internal to AVCTP.
+ *
+ ******************************************************************************/
+#ifndef AVCT_INT_H
+#define AVCT_INT_H
+
+#include "gki.h"
+#include "avct_api.h"
+#include "avct_defs.h"
+#include "l2c_api.h"
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* lcb state machine events */
+enum {
+    AVCT_LCB_UL_BIND_EVT,
+    AVCT_LCB_UL_UNBIND_EVT,
+    AVCT_LCB_UL_MSG_EVT,
+    AVCT_LCB_INT_CLOSE_EVT,
+    AVCT_LCB_LL_OPEN_EVT,
+    AVCT_LCB_LL_CLOSE_EVT,
+    AVCT_LCB_LL_MSG_EVT,
+    AVCT_LCB_LL_CONG_EVT
+};
+
+
+/* "states" used for L2CAP channel */
+#define AVCT_CH_IDLE    0       /* No connection */
+#define AVCT_CH_CONN    1       /* Waiting for connection confirm */
+#define AVCT_CH_CFG     2       /* Waiting for configuration complete */
+#define AVCT_CH_OPEN    3       /* Channel opened */
+
+/* "no event" indicator used by ccb dealloc */
+#define AVCT_NO_EVT     0xFF
+
+/*****************************************************************************
+** data types
+*****************************************************************************/
+/* sub control block type - common data members for tAVCT_LCB and tAVCT_BCB */
+typedef struct {
+    UINT16              peer_mtu;	    /* peer l2c mtu */
+    UINT16              ch_result;      /* L2CAP connection result value */
+    UINT16              ch_lcid;        /* L2CAP channel LCID */
+    UINT8               allocated;      /* 0, not allocated. index+1, otherwise. */
+    UINT8               state;          /* The state machine state */
+    UINT8               ch_state;       /* L2CAP channel state */
+    UINT8               ch_flags;       /* L2CAP configuration flags */
+} tAVCT_SCB;
+
+/* link control block type */
+typedef struct {
+    UINT16              peer_mtu;	    /* peer l2c mtu */
+    UINT16              ch_result;      /* L2CAP connection result value */
+    UINT16              ch_lcid;        /* L2CAP channel LCID */
+    UINT8               allocated;      /* 0, not allocated. index+1, otherwise. */
+    UINT8               state;          /* The state machine state */
+    UINT8               ch_state;       /* L2CAP channel state */
+    UINT8               ch_flags;       /* L2CAP configuration flags */
+    BT_HDR              *p_rx_msg;      /* Message being reassembled */
+    UINT16              conflict_lcid;  /* L2CAP channel LCID */
+    BD_ADDR             peer_addr;      /* BD address of peer */
+    BUFFER_Q            tx_q;           /* Transmit data buffer queue       */
+    BOOLEAN             cong;           /* TRUE, if congested */
+} tAVCT_LCB;
+
+/* browse control block type */
+typedef struct {
+    UINT16              peer_mtu;	    /* peer l2c mtu */
+    UINT16              ch_result;      /* L2CAP connection result value */
+    UINT16              ch_lcid;        /* L2CAP channel LCID */
+    UINT8               allocated;      /* 0, not allocated. index+1, otherwise. */
+    UINT8               state;          /* The state machine state */
+    UINT8               ch_state;       /* L2CAP channel state */
+    UINT8               ch_flags;       /* L2CAP configuration flags */
+    BT_HDR              *p_tx_msg;      /* Message to be sent - in case the browsing channel is not open when MsgReg is called */
+    UINT8               ch_close;       /* CCB index+1, if CCB initiated channel close */
+} tAVCT_BCB;
+
+#define AVCT_ALOC_LCB       0x01
+#define AVCT_ALOC_BCB       0x02
+/* connection control block */
+typedef struct {
+    tAVCT_CC            cc;                 /* parameters from connection creation */
+    tAVCT_LCB           *p_lcb;             /* Associated LCB */
+    tAVCT_BCB           *p_bcb;             /* associated BCB */
+    BOOLEAN             ch_close;           /* Whether CCB initiated channel close */
+    UINT8               allocated;          /* Whether LCB/BCB is allocated */
+} tAVCT_CCB;
+
+/* data type associated with UL_MSG_EVT */
+typedef struct {
+    BT_HDR                  *p_buf;
+    tAVCT_CCB               *p_ccb;
+    UINT8                   label;
+    UINT8                   cr;
+} tAVCT_UL_MSG;
+
+/* union associated with lcb state machine events */
+typedef union {
+    tAVCT_UL_MSG            ul_msg;
+    BT_HDR                  *p_buf;
+    tAVCT_CCB               *p_ccb;
+    UINT16                  result;
+    BOOLEAN                 cong;
+    UINT8                   err_code;
+} tAVCT_LCB_EVT;
+
+/* Control block for AVCT */
+typedef struct {
+    tAVCT_LCB       lcb[AVCT_NUM_LINKS];    /* link control blocks */
+    tAVCT_BCB       bcb[AVCT_NUM_LINKS];    /* browse control blocks */
+    tAVCT_CCB       ccb[AVCT_NUM_CONN];     /* connection control blocks */
+    UINT16          mtu;                    /* our L2CAP MTU */
+    UINT16          mtu_br;                 /* our L2CAP MTU for the Browsing channel */
+    UINT8           trace_level;            /* trace level */
+} tAVCT_CB;
+
+/*****************************************************************************
+** function declarations
+*****************************************************************************/
+
+/* LCB function declarations */
+extern void avct_lcb_event(tAVCT_LCB *p_lcb, UINT8 event, tAVCT_LCB_EVT *p_data);
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+extern void avct_bcb_event(tAVCT_BCB *p_bcb, UINT8 event, tAVCT_LCB_EVT *p_data);
+extern void avct_close_bcb(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern tAVCT_LCB *avct_lcb_by_bcb(tAVCT_BCB *p_bcb);
+extern tAVCT_BCB *avct_bcb_by_lcb(tAVCT_LCB *p_lcb);
+extern BOOLEAN avct_bcb_last_ccb(tAVCT_BCB *p_bcb, tAVCT_CCB *p_ccb_last);
+extern tAVCT_BCB *avct_bcb_by_lcid(UINT16 lcid);
+#endif
+extern tAVCT_LCB *avct_lcb_by_bd(BD_ADDR bd_addr);
+extern tAVCT_LCB *avct_lcb_alloc(BD_ADDR bd_addr);
+extern void avct_lcb_dealloc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern tAVCT_LCB *avct_lcb_by_lcid(UINT16 lcid);
+extern tAVCT_CCB *avct_lcb_has_pid(tAVCT_LCB *p_lcb, UINT16 pid);
+extern BOOLEAN avct_lcb_last_ccb(tAVCT_LCB *p_lcb, tAVCT_CCB *p_ccb_last);
+
+/* LCB action functions */
+extern void avct_lcb_chnl_open(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_unbind_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_open_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_open_fail(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_close_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_close_cfm(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_bind_conn(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_chk_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_chnl_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_bind_fail(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_cong_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_discard_msg(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_send_msg(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_msg_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+extern void avct_lcb_free_msg_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data);
+
+/* BCB action functions */
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+typedef void (*tAVCT_BCB_ACTION)(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_chnl_open(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_unbind_disc(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_open_ind(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_open_fail(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_close_ind(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_close_cfm(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_bind_conn(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_chk_disc(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_chnl_disc(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_bind_fail(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_cong_ind(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_discard_msg(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_send_msg(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_msg_ind(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+extern void avct_bcb_free_msg_ind(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+
+extern void avct_bcb_dealloc(tAVCT_BCB *p_bcb, tAVCT_LCB_EVT *p_data);
+
+extern const tAVCT_BCB_ACTION avct_bcb_action[];
+extern const UINT8 avct_lcb_pkt_type_len[];
+extern const tL2CAP_FCR_OPTS avct_l2c_br_fcr_opts_def;
+#endif
+
+/* CCB function declarations */
+extern tAVCT_CCB *avct_ccb_alloc(tAVCT_CC *p_cc);
+extern void avct_ccb_dealloc(tAVCT_CCB *p_ccb, UINT8 event, UINT16 result, BD_ADDR bd_addr);
+extern UINT8 avct_ccb_to_idx(tAVCT_CCB *p_ccb);
+extern tAVCT_CCB *avct_ccb_by_idx(UINT8 idx);
+
+
+/*****************************************************************************
+** global data
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* Main control block */
+#if AVCT_DYNAMIC_MEMORY == FALSE
+AVCT_API extern tAVCT_CB avct_cb;
+#else
+AVCT_API extern tAVCT_CB *avct_cb_ptr;
+#define avct_cb (*avct_cb_ptr)
+#endif
+
+/* L2CAP callback registration structure */
+extern const tL2CAP_APPL_INFO avct_l2c_appl;
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+extern const tL2CAP_APPL_INFO avct_l2c_br_appl;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* AVCT_INT_H */
+
+
diff --git a/stack/avct/avct_l2c.c b/stack/avct/avct_l2c.c
new file mode 100644
index 0000000..ef0f5fc
--- /dev/null
+++ b/stack/avct/avct_l2c.c
@@ -0,0 +1,434 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This AVCTP module interfaces to L2CAP
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avct_api.h"
+#include "avct_int.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+
+/* Configuration flags. */
+#define AVCT_L2C_CFG_IND_DONE   (1<<0)
+#define AVCT_L2C_CFG_CFM_DONE   (1<<1)
+
+/* callback function declarations */
+void avct_l2c_connect_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+void avct_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result);
+void avct_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void avct_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void avct_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed);
+void avct_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result);
+void avct_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested);
+void avct_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf);
+
+/* L2CAP callback function structure */
+const tL2CAP_APPL_INFO avct_l2c_appl = {
+    avct_l2c_connect_ind_cback,
+    avct_l2c_connect_cfm_cback,
+    NULL,
+    avct_l2c_config_ind_cback,
+    avct_l2c_config_cfm_cback,
+    avct_l2c_disconnect_ind_cback,
+    avct_l2c_disconnect_cfm_cback,
+    NULL,
+    avct_l2c_data_ind_cback,
+    avct_l2c_congestion_ind_cback,
+    NULL                                /* tL2CA_TX_COMPLETE_CB */
+};
+
+/*******************************************************************************
+**
+** Function         avct_l2c_is_passive
+**
+** Description      check is the CCB associated with the given LCB was created
+**                  as passive
+**
+** Returns          TRUE, if the given LCB is created as AVCT_PASSIVE
+**
+*******************************************************************************/
+static BOOLEAN avct_l2c_is_passive (tAVCT_LCB *p_lcb)
+{
+    BOOLEAN     is_passive = FALSE;
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb))
+        {
+            AVCT_TRACE_DEBUG1("avct_l2c_is_ct control:x%x", p_ccb->cc.control);
+            if (p_ccb->cc.control & AVCT_PASSIVE)
+            {
+                is_passive = TRUE;
+                break;
+            }
+        }
+    }
+    return is_passive;
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_connect_ind_cback
+**
+** Description      This is the L2CAP connect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_connect_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    tAVCT_LCB       *p_lcb;
+    UINT16          result = L2CAP_CONN_OK;
+    tL2CAP_CFG_INFO cfg;
+
+    /* do we already have a channel for this peer? */
+    if ((p_lcb = avct_lcb_by_bd(bd_addr)) == NULL)
+    {
+        /* no, allocate lcb */
+        if ((p_lcb = avct_lcb_alloc(bd_addr)) == NULL)
+        {
+            /* no ccb available, reject L2CAP connection */
+            result = L2CAP_CONN_NO_RESOURCES;
+        }
+    }
+    /* else we already have a channel for this peer */
+    else
+    {
+        if (!avct_l2c_is_passive (p_lcb) || (p_lcb->ch_state == AVCT_CH_OPEN))
+        {
+            /* this LCB included CT role - reject */
+            result = L2CAP_CONN_NO_RESOURCES;
+        }
+        else
+        {
+            /* TG role only - accept the connection from CT. move the channel ID to the conflict list */
+            p_lcb->conflict_lcid = p_lcb->ch_lcid;
+            AVCT_TRACE_DEBUG1("avct_l2c_connect_ind_cback conflict_lcid:0x%x", p_lcb->conflict_lcid);
+        }
+    }
+
+    if(p_lcb)
+    {
+        AVCT_TRACE_DEBUG3("avct_l2c_connect_ind_cback: 0x%x, res: %d, ch_state: %d",
+            lcid, result, p_lcb->ch_state);
+    }
+    /* Send L2CAP connect rsp */
+    L2CA_ConnectRsp(bd_addr, id, lcid, result, 0);
+
+    /* if result ok, proceed with connection */
+    if (result == L2CAP_CONN_OK)
+    {
+        /* store LCID */
+        p_lcb->ch_lcid = lcid;
+
+        /* transition to configuration state */
+        p_lcb->ch_state = AVCT_CH_CFG;
+
+        /* Send L2CAP config req */
+        memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        cfg.mtu_present = TRUE;
+        cfg.mtu = avct_cb.mtu;
+        L2CA_ConfigReq(lcid, &cfg);
+        AVCT_TRACE_DEBUG0("avct_l2c snd Cfg Req");
+    }
+
+#if (BT_USE_TRACES == TRUE)
+    if(p_lcb)
+        AVCT_TRACE_DEBUG1("ch_state cni: %d ", p_lcb->ch_state);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_connect_cfm_cback
+**
+** Description      This is the L2CAP connect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tAVCT_LCB       *p_lcb;
+    tL2CAP_CFG_INFO cfg;
+
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        AVCT_TRACE_DEBUG4("avct_l2c_connect_cfm_cback lcid:0x%x result: %d ch_state: %d, conflict_lcid:0x%x",
+            lcid, result, p_lcb->ch_state, p_lcb->conflict_lcid);
+        /* if in correct state */
+        if (p_lcb->ch_state == AVCT_CH_CONN)
+        {
+            /* if result successful */
+            if (result == L2CAP_CONN_OK)
+            {
+                /* set channel state */
+                p_lcb->ch_state = AVCT_CH_CFG;
+
+                /* Send L2CAP config req */
+                memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+                cfg.mtu_present = TRUE;
+                cfg.mtu = avct_cb.mtu;
+                L2CA_ConfigReq(lcid, &cfg);
+                AVCT_TRACE_DEBUG0("avct_l2c snd Cfg Req");
+            }
+            /* else failure */
+            else
+            {
+                AVCT_TRACE_DEBUG1("avct_l2c_connect_cfm_cback conflict_lcid:0x%x", p_lcb->conflict_lcid);
+                if (p_lcb->conflict_lcid == lcid)
+                    p_lcb->conflict_lcid = 0;
+                else
+                    avct_lcb_event(p_lcb, AVCT_LCB_LL_CLOSE_EVT, (tAVCT_LCB_EVT *) &result);
+            }
+        }
+        else if (p_lcb->conflict_lcid == lcid)
+        {
+            /* we must be in AVCT_CH_CFG state for the ch_lcid channel */
+            AVCT_TRACE_DEBUG2("avct_l2c_connect_cfm_cback ch_state: %d, conflict_lcid:0x%x", p_lcb->ch_state, p_lcb->conflict_lcid);
+            if (result == L2CAP_CONN_OK)
+            {
+                /* just in case the peer also accepts our connection - Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+            p_lcb->conflict_lcid = 0;
+        }
+        AVCT_TRACE_DEBUG1("ch_state cnc: %d ", p_lcb->ch_state);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_config_cfm_cback
+**
+** Description      This is the L2CAP config confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tAVCT_LCB       *p_lcb;
+
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        AVCT_TRACE_DEBUG3("avct_l2c_config_cfm_cback: 0x%x, ch_state: %d, res: %d",
+            lcid, p_lcb->ch_state, p_cfg->result);
+        /* if in correct state */
+        if (p_lcb->ch_state == AVCT_CH_CFG)
+        {
+            /* if result successful */
+            if (p_cfg->result == L2CAP_CFG_OK)
+            {
+                /* update flags */
+                p_lcb->ch_flags |= AVCT_L2C_CFG_CFM_DONE;
+
+                /* if configuration complete */
+                if (p_lcb->ch_flags & AVCT_L2C_CFG_IND_DONE)
+                {
+                    p_lcb->ch_state = AVCT_CH_OPEN;
+                    avct_lcb_event(p_lcb, AVCT_LCB_LL_OPEN_EVT, NULL);
+                }
+            }
+            /* else failure */
+            else
+            {
+                AVCT_TRACE_DEBUG1("ERROR avct_l2c_config_cfm_cback L2CA_DisconnectReq %d ", p_lcb->ch_state);
+                /* store result value */
+                p_lcb->ch_result = p_cfg->result;
+
+                /* Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+        }
+        AVCT_TRACE_DEBUG1("ch_state cfc: %d ", p_lcb->ch_state);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_config_ind_cback
+**
+** Description      This is the L2CAP config indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tAVCT_LCB       *p_lcb;
+
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        AVCT_TRACE_DEBUG2("avct_l2c_config_ind_cback: 0x%x, ch_state: %d", lcid, p_lcb->ch_state);
+        /* store the mtu in tbl */
+        if (p_cfg->mtu_present)
+        {
+            p_lcb->peer_mtu = p_cfg->mtu;
+        }
+        else
+        {
+            p_lcb->peer_mtu = L2CAP_DEFAULT_MTU;
+        }
+
+        /* send L2CAP configure response */
+        memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        p_cfg->result = L2CAP_CFG_OK;
+        L2CA_ConfigRsp(lcid, p_cfg);
+
+        /* if first config ind */
+        if ((p_lcb->ch_flags & AVCT_L2C_CFG_IND_DONE) == 0)
+        {
+            /* update flags */
+            p_lcb->ch_flags |= AVCT_L2C_CFG_IND_DONE;
+
+            /* if configuration complete */
+            if (p_lcb->ch_flags & AVCT_L2C_CFG_CFM_DONE)
+            {
+                p_lcb->ch_state = AVCT_CH_OPEN;
+                avct_lcb_event(p_lcb, AVCT_LCB_LL_OPEN_EVT, NULL);
+            }
+        }
+        AVCT_TRACE_DEBUG1("ch_state cfi: %d ", p_lcb->ch_state);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_disconnect_ind_cback
+**
+** Description      This is the L2CAP disconnect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed)
+{
+    tAVCT_LCB       *p_lcb;
+    UINT16          result = AVCT_RESULT_FAIL;
+
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        AVCT_TRACE_DEBUG2("avct_l2c_disconnect_ind_cback: 0x%x, ch_state: %d", lcid, p_lcb->ch_state);
+        if (ack_needed)
+        {
+            /* send L2CAP disconnect response */
+            L2CA_DisconnectRsp(lcid);
+        }
+
+        avct_lcb_event(p_lcb, AVCT_LCB_LL_CLOSE_EVT, (tAVCT_LCB_EVT *) &result);
+        AVCT_TRACE_DEBUG1("ch_state di: %d ", p_lcb->ch_state);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_disconnect_cfm_cback
+**
+** Description      This is the L2CAP disconnect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tAVCT_LCB       *p_lcb;
+    UINT16          res;
+
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        AVCT_TRACE_DEBUG3("avct_l2c_disconnect_cfm_cback: 0x%x, ch_state: %d, res: %d",
+            lcid, p_lcb->ch_state, result);
+        /* result value may be previously stored */
+        res = (p_lcb->ch_result != 0) ? p_lcb->ch_result : result;
+        p_lcb->ch_result = 0;
+
+        avct_lcb_event(p_lcb, AVCT_LCB_LL_CLOSE_EVT, (tAVCT_LCB_EVT *) &res);
+        AVCT_TRACE_DEBUG1("ch_state dc: %d ", p_lcb->ch_state);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_congestion_ind_cback
+**
+** Description      This is the L2CAP congestion indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested)
+{
+    tAVCT_LCB       *p_lcb;
+
+    AVCT_TRACE_DEBUG1("avct_l2c_congestion_ind_cback: 0x%x", lcid);
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        avct_lcb_event(p_lcb, AVCT_LCB_LL_CONG_EVT, (tAVCT_LCB_EVT *) &is_congested);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_l2c_data_ind_cback
+**
+** Description      This is the L2CAP data indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avct_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf)
+{
+    tAVCT_LCB       *p_lcb;
+
+    AVCT_TRACE_DEBUG1("avct_l2c_data_ind_cback: 0x%x", lcid);
+    /* look up lcb for this channel */
+    if ((p_lcb = avct_lcb_by_lcid(lcid)) != NULL)
+    {
+        avct_lcb_event(p_lcb, AVCT_LCB_LL_MSG_EVT, (tAVCT_LCB_EVT *) &p_buf);
+    }
+    else /* prevent buffer leak */
+    {
+        AVCT_TRACE_WARNING0("ERROR -> avct_l2c_data_ind_cback drop buffer");
+        GKI_freebuf(p_buf);
+    }
+}
+
diff --git a/stack/avct/avct_lcb.c b/stack/avct/avct_lcb.c
new file mode 100644
index 0000000..bb3f447
--- /dev/null
+++ b/stack/avct/avct_lcb.c
@@ -0,0 +1,471 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the link control state machine and functions which
+ *  operate on the link control block.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avct_api.h"
+#include "avct_int.h"
+#include "gki.h"
+
+/*****************************************************************************
+** state machine constants and types
+*****************************************************************************/
+
+#if BT_TRACE_VERBOSE == TRUE
+
+/* verbose state strings for trace */
+const char * const avct_lcb_st_str[] = {
+    "LCB_IDLE_ST",
+    "LCB_OPENING_ST",
+    "LCB_OPEN_ST",
+    "LCB_CLOSING_ST"
+};
+
+/* verbose event strings for trace */
+const char * const avct_lcb_evt_str[] = {
+    "UL_BIND_EVT",
+    "UL_UNBIND_EVT",
+    "UL_MSG_EVT",
+    "INT_CLOSE_EVT",
+    "LL_OPEN_EVT",
+    "LL_CLOSE_EVT",
+    "LL_MSG_EVT",
+    "LL_CONG_EVT"
+};
+
+#endif
+
+/* lcb state machine states */
+enum {
+    AVCT_LCB_IDLE_ST,
+    AVCT_LCB_OPENING_ST,
+    AVCT_LCB_OPEN_ST,
+    AVCT_LCB_CLOSING_ST
+};
+
+/* state machine action enumeration list */
+enum {
+    AVCT_LCB_CHNL_OPEN,
+    AVCT_LCB_CHNL_DISC,
+    AVCT_LCB_SEND_MSG,
+    AVCT_LCB_OPEN_IND,
+    AVCT_LCB_OPEN_FAIL,
+    AVCT_LCB_CLOSE_IND,
+    AVCT_LCB_CLOSE_CFM,
+    AVCT_LCB_MSG_IND,
+    AVCT_LCB_CONG_IND,
+    AVCT_LCB_BIND_CONN,
+    AVCT_LCB_BIND_FAIL,
+    AVCT_LCB_UNBIND_DISC,
+    AVCT_LCB_CHK_DISC,
+    AVCT_LCB_DISCARD_MSG,
+    AVCT_LCB_DEALLOC,
+    AVCT_LCB_FREE_MSG_IND,
+    AVCT_LCB_NUM_ACTIONS
+};
+
+#define AVCT_LCB_IGNORE     AVCT_LCB_NUM_ACTIONS
+
+/* type for action functions */
+typedef void (*tAVCT_LCB_ACTION)(tAVCT_LCB *p_ccb, tAVCT_LCB_EVT *p_data);
+
+/* action function list */
+const tAVCT_LCB_ACTION avct_lcb_action[] = {
+    avct_lcb_chnl_open,
+    avct_lcb_chnl_disc,
+    avct_lcb_send_msg,
+    avct_lcb_open_ind,
+    avct_lcb_open_fail,
+    avct_lcb_close_ind,
+    avct_lcb_close_cfm,
+    avct_lcb_msg_ind,
+    avct_lcb_cong_ind,
+    avct_lcb_bind_conn,
+    avct_lcb_bind_fail,
+    avct_lcb_unbind_disc,
+    avct_lcb_chk_disc,
+    avct_lcb_discard_msg,
+    avct_lcb_dealloc,
+    avct_lcb_free_msg_ind
+};
+
+/* state table information */
+#define AVCT_LCB_ACTIONS            2       /* number of actions */
+#define AVCT_LCB_NEXT_STATE         2       /* position of next state */
+#define AVCT_LCB_NUM_COLS           3       /* number of columns in state tables */
+
+/* state table for idle state */
+const UINT8 avct_lcb_st_idle[][AVCT_LCB_NUM_COLS] = {
+/* Event                Action 1                    Action 2                    Next state */
+/* UL_BIND_EVT */       {AVCT_LCB_CHNL_OPEN,        AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST},
+/* UL_UNBIND_EVT */     {AVCT_LCB_UNBIND_DISC,      AVCT_LCB_IGNORE,            AVCT_LCB_IDLE_ST},
+/* UL_MSG_EVT */        {AVCT_LCB_DISCARD_MSG,      AVCT_LCB_IGNORE,            AVCT_LCB_IDLE_ST},
+/* INT_CLOSE_EVT */     {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_IDLE_ST},
+/* LL_OPEN_EVT */       {AVCT_LCB_OPEN_IND,         AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* LL_CLOSE_EVT */      {AVCT_LCB_CLOSE_IND,        AVCT_LCB_DEALLOC,           AVCT_LCB_IDLE_ST},
+/* LL_MSG_EVT */        {AVCT_LCB_FREE_MSG_IND,     AVCT_LCB_IGNORE,            AVCT_LCB_IDLE_ST},
+/* LL_CONG_EVT */       {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_IDLE_ST}
+};
+
+/* state table for opening state */
+const UINT8 avct_lcb_st_opening[][AVCT_LCB_NUM_COLS] = {
+/* Event                Action 1                    Action 2                    Next state */
+/* UL_BIND_EVT */       {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST},
+/* UL_UNBIND_EVT */     {AVCT_LCB_UNBIND_DISC,      AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST},
+/* UL_MSG_EVT */        {AVCT_LCB_DISCARD_MSG,      AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST},
+/* INT_CLOSE_EVT */     {AVCT_LCB_CHNL_DISC,        AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* LL_OPEN_EVT */       {AVCT_LCB_OPEN_IND,         AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* LL_CLOSE_EVT */      {AVCT_LCB_OPEN_FAIL,        AVCT_LCB_DEALLOC,           AVCT_LCB_IDLE_ST},
+/* LL_MSG_EVT */        {AVCT_LCB_FREE_MSG_IND,     AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST},
+/* LL_CONG_EVT */       {AVCT_LCB_CONG_IND,         AVCT_LCB_IGNORE,            AVCT_LCB_OPENING_ST}
+};
+
+/* state table for open state */
+const UINT8 avct_lcb_st_open[][AVCT_LCB_NUM_COLS] = {
+/* Event                Action 1                    Action 2                    Next state */
+/* UL_BIND_EVT */       {AVCT_LCB_BIND_CONN,        AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* UL_UNBIND_EVT */     {AVCT_LCB_CHK_DISC,         AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* UL_MSG_EVT */        {AVCT_LCB_SEND_MSG,         AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* INT_CLOSE_EVT */     {AVCT_LCB_CHNL_DISC,        AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* LL_OPEN_EVT */       {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* LL_CLOSE_EVT */      {AVCT_LCB_CLOSE_IND,        AVCT_LCB_DEALLOC,           AVCT_LCB_IDLE_ST},
+/* LL_MSG_EVT */        {AVCT_LCB_MSG_IND,          AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST},
+/* LL_CONG_EVT */       {AVCT_LCB_CONG_IND,         AVCT_LCB_IGNORE,            AVCT_LCB_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 avct_lcb_st_closing[][AVCT_LCB_NUM_COLS] = {
+/* Event                Action 1                    Action 2                    Next state */
+/* UL_BIND_EVT */       {AVCT_LCB_BIND_FAIL,        AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* UL_UNBIND_EVT */     {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* UL_MSG_EVT */        {AVCT_LCB_DISCARD_MSG,      AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* INT_CLOSE_EVT */     {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* LL_OPEN_EVT */       {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* LL_CLOSE_EVT */      {AVCT_LCB_CLOSE_CFM,        AVCT_LCB_DEALLOC,           AVCT_LCB_IDLE_ST},
+/* LL_MSG_EVT */        {AVCT_LCB_FREE_MSG_IND,     AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST},
+/* LL_CONG_EVT */       {AVCT_LCB_IGNORE,           AVCT_LCB_IGNORE,            AVCT_LCB_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tAVCT_LCB_ST_TBL)[AVCT_LCB_NUM_COLS];
+
+/* state table */
+const tAVCT_LCB_ST_TBL avct_lcb_st_tbl[] = {
+    avct_lcb_st_idle,
+    avct_lcb_st_opening,
+    avct_lcb_st_open,
+    avct_lcb_st_closing
+};
+
+/*******************************************************************************
+**
+** Function         avct_lcb_event
+**
+** Description      State machine event handling function for lcb
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_event(tAVCT_LCB *p_lcb, UINT8 event, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_LCB_ST_TBL    state_table;
+    UINT8               action;
+    int                 i;
+
+#if BT_TRACE_VERBOSE == TRUE
+    AVCT_TRACE_EVENT3("LCB lcb=%d event=%s state=%s", p_lcb->allocated, avct_lcb_evt_str[event], avct_lcb_st_str[p_lcb->state]);
+#else
+    AVCT_TRACE_EVENT3("LCB lcb=%d event=%d state=%d", p_lcb->allocated, event, p_lcb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = avct_lcb_st_tbl[p_lcb->state];
+
+    /* set next state */
+    p_lcb->state = state_table[event][AVCT_LCB_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < AVCT_LCB_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != AVCT_LCB_IGNORE)
+        {
+            (*avct_lcb_action[action])(p_lcb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_bcb_event
+**
+** Description      State machine event handling function for lcb
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+void avct_bcb_event(tAVCT_BCB *p_bcb, UINT8 event, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_LCB_ST_TBL    state_table;
+    UINT8               action;
+    int                 i;
+
+#if BT_TRACE_VERBOSE == TRUE
+    AVCT_TRACE_EVENT3("BCB lcb=%d event=%s state=%s", p_bcb->allocated, avct_lcb_evt_str[event], avct_lcb_st_str[p_bcb->state]);
+#else
+    AVCT_TRACE_EVENT3("BCB lcb=%d event=%d state=%d", p_bcb->allocated, event, p_bcb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = avct_lcb_st_tbl[p_bcb->state];
+
+    /* set next state */
+    p_bcb->state = state_table[event][AVCT_LCB_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < AVCT_LCB_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != AVCT_LCB_IGNORE)
+        {
+            (*avct_bcb_action[action])(p_bcb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         avct_lcb_by_bd
+**
+** Description      This lookup function finds the lcb for a BD address.
+**
+**
+** Returns          pointer to the lcb, or NULL if none found.
+**
+*******************************************************************************/
+tAVCT_LCB *avct_lcb_by_bd(BD_ADDR bd_addr)
+{
+    tAVCT_LCB   *p_lcb = &avct_cb.lcb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_LINKS; i++, p_lcb++)
+    {
+        /* if allocated lcb has matching lcb */
+        if (p_lcb->allocated && (!memcmp(p_lcb->peer_addr, bd_addr, BD_ADDR_LEN)))
+        {
+            break;
+        }
+    }
+
+    if (i == AVCT_NUM_LINKS)
+    {
+        /* if no lcb found */
+        p_lcb = NULL;
+
+        AVCT_TRACE_DEBUG6("No lcb for addr %02x-%02x-%02x-%02x-%02x-%02x",
+                          bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
+    }
+    return p_lcb;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_alloc
+**
+** Description      Allocate a link control block.
+**
+**
+** Returns          pointer to the lcb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+tAVCT_LCB *avct_lcb_alloc(BD_ADDR bd_addr)
+{
+    tAVCT_LCB   *p_lcb = &avct_cb.lcb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_LINKS; i++, p_lcb++)
+    {
+        if (!p_lcb->allocated)
+        {
+            p_lcb->allocated = (UINT8)(i + 1);
+            memcpy(p_lcb->peer_addr, bd_addr, BD_ADDR_LEN);
+            AVCT_TRACE_DEBUG1("avct_lcb_alloc %d", p_lcb->allocated);
+            break;
+        }
+    }
+
+    if (i == AVCT_NUM_LINKS)
+    {
+        /* out of lcbs */
+        p_lcb = NULL;
+        AVCT_TRACE_WARNING0("Out of lcbs");
+    }
+    return p_lcb;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_dealloc
+**
+** Description      Deallocate a link control block.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avct_lcb_dealloc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    BOOLEAN     found = FALSE;
+    int         i;
+
+    AVCT_TRACE_DEBUG1("avct_lcb_dealloc %d", p_lcb->allocated);
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        /* if ccb allocated and */
+        if (p_ccb->allocated)
+        {
+            if (p_ccb->p_lcb == p_lcb)
+            {
+                AVCT_TRACE_DEBUG1("avct_lcb_dealloc used by ccb: %d", i);
+                found = TRUE;
+                break;
+            }
+        }
+    }
+
+    if (!found)
+    {
+        AVCT_TRACE_DEBUG0("avct_lcb_dealloc now");
+
+        /* clear reassembled msg buffer if in use */
+        if (p_lcb->p_rx_msg != NULL)
+        {
+            GKI_freebuf(p_lcb->p_rx_msg);
+        }
+        memset(p_lcb, 0, sizeof(tAVCT_LCB));
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_by_lcid
+**
+** Description      Find the LCB associated with the L2CAP LCID
+**
+**
+** Returns          pointer to the lcb, or NULL if none found.
+**
+*******************************************************************************/
+tAVCT_LCB *avct_lcb_by_lcid(UINT16 lcid)
+{
+    tAVCT_LCB   *p_lcb = &avct_cb.lcb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_LINKS; i++, p_lcb++)
+    {
+        if (p_lcb->allocated && ((p_lcb->ch_lcid == lcid) || (p_lcb->conflict_lcid == lcid)))
+        {
+            break;
+        }
+    }
+
+    if (i == AVCT_NUM_LINKS)
+    {
+        /* out of lcbs */
+        p_lcb = NULL;
+        AVCT_TRACE_WARNING1("No lcb for lcid %x", lcid);
+    }
+
+    return p_lcb;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_has_pid
+**
+** Description      See if any ccbs on this lcb have a particular pid.
+**
+**
+** Returns          Pointer to CCB if PID found, NULL otherwise.
+**
+*******************************************************************************/
+tAVCT_CCB *avct_lcb_has_pid(tAVCT_LCB *p_lcb, UINT16 pid)
+{
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    int         i;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb) && (p_ccb->cc.pid == pid))
+        {
+            return p_ccb;
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_last_ccb
+**
+** Description      See if given ccb is only one on the lcb.
+**
+**
+** Returns          TRUE if ccb is last, FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN avct_lcb_last_ccb(tAVCT_LCB *p_lcb, tAVCT_CCB *p_ccb_last)
+{
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    int         i;
+
+    AVCT_TRACE_WARNING0("avct_lcb_last_ccb");
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        AVCT_TRACE_WARNING6("%x: aloc:%d, lcb:0x%x/0x%x, ccb:0x%x/0x%x",
+            i, p_ccb->allocated, p_ccb->p_lcb, p_lcb, p_ccb, p_ccb_last);
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb) && (p_ccb != p_ccb_last))
+        {
+            return FALSE;
+        }
+    }
+    return TRUE;
+}
+
+
+
diff --git a/stack/avct/avct_lcb_act.c b/stack/avct/avct_lcb_act.c
new file mode 100644
index 0000000..b883517
--- /dev/null
+++ b/stack/avct/avct_lcb_act.c
@@ -0,0 +1,702 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains action functions of the link control state machine.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avct_api.h"
+#include "avct_int.h"
+#include "gki.h"
+#include "btm_api.h"
+
+/* packet header length lookup table */
+const UINT8 avct_lcb_pkt_type_len[] = {
+    AVCT_HDR_LEN_SINGLE,
+    AVCT_HDR_LEN_START,
+    AVCT_HDR_LEN_CONT,
+    AVCT_HDR_LEN_END
+};
+
+/*******************************************************************************
+**
+** Function         avct_lcb_msg_asmbl
+**
+** Description      Reassemble incoming message.
+**
+**
+** Returns          Pointer to reassembled message;  NULL if no message
+**                  available.
+**
+*******************************************************************************/
+static BT_HDR *avct_lcb_msg_asmbl(tAVCT_LCB *p_lcb, BT_HDR *p_buf)
+{
+    UINT8   *p;
+    UINT8   pkt_type;
+    BT_HDR  *p_ret;
+    UINT16  buf_len;
+
+    /* parse the message header */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    AVCT_PRS_PKT_TYPE(p, pkt_type);
+
+    /* quick sanity check on length */
+    if (p_buf->len < avct_lcb_pkt_type_len[pkt_type])
+    {
+        GKI_freebuf(p_buf);
+        AVCT_TRACE_WARNING0("Bad length during reassembly");
+        p_ret = NULL;
+    }
+    /* single packet */
+    else if (pkt_type == AVCT_PKT_TYPE_SINGLE)
+    {
+        /* if reassembly in progress drop message and process new single */
+        if (p_lcb->p_rx_msg != NULL)
+        {
+            GKI_freebuf(p_lcb->p_rx_msg);
+            p_lcb->p_rx_msg = NULL;
+            AVCT_TRACE_WARNING0("Got single during reassembly");
+        }
+        p_ret = p_buf;
+    }
+    /* start packet */
+    else if (pkt_type == AVCT_PKT_TYPE_START)
+    {
+        /* if reassembly in progress drop message and process new start */
+        if (p_lcb->p_rx_msg != NULL)
+        {
+            GKI_freebuf(p_lcb->p_rx_msg);
+            AVCT_TRACE_WARNING0("Got start during reassembly");
+        }
+        p_lcb->p_rx_msg = p_buf;
+
+        /* copy first header byte over nosp */
+        *(p + 1) = *p;
+
+        /* set offset to point to where to copy next */
+        p_lcb->p_rx_msg->offset += p_lcb->p_rx_msg->len;
+
+        /* adjust length for packet header */
+        p_lcb->p_rx_msg->len -= 1;
+
+        p_ret = NULL;
+    }
+    /* continue or end */
+    else
+    {
+        /* if no reassembly in progress drop message */
+        if (p_lcb->p_rx_msg == NULL)
+        {
+            GKI_freebuf(p_buf);
+            AVCT_TRACE_WARNING1("Pkt type=%d out of order", pkt_type);
+            p_ret = NULL;
+        }
+        else
+        {
+            /* get size of buffer holding assembled message */
+            buf_len = GKI_get_buf_size(p_lcb->p_rx_msg) - sizeof(BT_HDR);
+
+            /* adjust offset and len of fragment for header byte */
+            p_buf->offset += AVCT_HDR_LEN_CONT;
+            p_buf->len -= AVCT_HDR_LEN_CONT;
+
+            /* verify length */
+            if ((p_lcb->p_rx_msg->offset + p_buf->len) > buf_len)
+            {
+                /* won't fit; free everything */
+                GKI_freebuf(p_lcb->p_rx_msg);
+                p_lcb->p_rx_msg = NULL;
+                GKI_freebuf(p_buf);
+                p_ret = NULL;
+                AVCT_TRACE_WARNING0("Fragmented message to big!");
+            }
+            else
+            {
+                /* copy contents of p_buf to p_rx_msg */
+                memcpy((UINT8 *)(p_lcb->p_rx_msg + 1) + p_lcb->p_rx_msg->offset,
+                       (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len);
+
+                if (pkt_type == AVCT_PKT_TYPE_END)
+                {
+                    p_lcb->p_rx_msg->offset -= p_lcb->p_rx_msg->len;
+                    p_lcb->p_rx_msg->len += p_buf->len;
+                    p_ret = p_lcb->p_rx_msg;
+                    p_lcb->p_rx_msg = NULL;
+                }
+                else
+                {
+                    p_lcb->p_rx_msg->offset += p_buf->len;
+                    p_lcb->p_rx_msg->len += p_buf->len;
+                    p_ret = NULL;
+                }
+                GKI_freebuf(p_buf);
+            }
+        }
+    }
+    return p_ret;
+}
+
+
+/*******************************************************************************
+**
+** Function         avct_lcb_chnl_open
+**
+** Description      Open L2CAP channel to peer
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_chnl_open(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    UINT16 result = AVCT_RESULT_FAIL;
+
+    BTM_SetOutService(p_lcb->peer_addr, BTM_SEC_SERVICE_AVCTP, 0);
+    /* call l2cap connect req */
+    p_lcb->ch_state = AVCT_CH_CONN;
+    if ((p_lcb->ch_lcid = L2CA_ConnectReq(AVCT_PSM, p_lcb->peer_addr)) == 0)
+    {
+        /* if connect req failed, send ourselves close event */
+        avct_lcb_event(p_lcb, AVCT_LCB_LL_CLOSE_EVT, (tAVCT_LCB_EVT *) &result);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_unbind_disc
+**
+** Description      Deallocate ccb and call callback with disconnect event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_unbind_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    avct_ccb_dealloc(p_data->p_ccb, AVCT_DISCONNECT_CFM_EVT, 0, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_open_ind
+**
+** Description      Handle an LL_OPEN event.  For each allocated ccb already
+**                  bound to this lcb, send a connect event.  For each
+**                  unbound ccb with a new PID, bind that ccb to this lcb and
+**                  send a connect event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_open_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB   *p_ccb = &avct_cb.ccb[0];
+    int         i;
+    BOOLEAN     bind = FALSE;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        /* if ccb allocated and */
+        if (p_ccb->allocated)
+        {
+            /* if bound to this lcb send connect confirm event */
+            if (p_ccb->p_lcb == p_lcb)
+            {
+                bind = TRUE;
+                L2CA_SetTxPriority(p_lcb->ch_lcid, L2CAP_CHNL_PRIORITY_HIGH);
+                p_ccb->cc.p_ctrl_cback(avct_ccb_to_idx(p_ccb), AVCT_CONNECT_CFM_EVT,
+                                       0, p_lcb->peer_addr);
+            }
+            /* if unbound acceptor and lcb doesn't already have a ccb for this PID */
+            else if ((p_ccb->p_lcb == NULL) && (p_ccb->cc.role == AVCT_ACP) &&
+                     (avct_lcb_has_pid(p_lcb, p_ccb->cc.pid) == NULL))
+            {
+                /* bind ccb to lcb and send connect ind event */
+                bind = TRUE;
+                p_ccb->p_lcb = p_lcb;
+                L2CA_SetTxPriority(p_lcb->ch_lcid, L2CAP_CHNL_PRIORITY_HIGH);
+                p_ccb->cc.p_ctrl_cback(avct_ccb_to_idx(p_ccb), AVCT_CONNECT_IND_EVT,
+                                    0, p_lcb->peer_addr);
+            }
+        }
+    }
+
+    /* if no ccbs bound to this lcb, disconnect */
+    if (bind == FALSE)
+    {
+        avct_lcb_event(p_lcb, AVCT_LCB_INT_CLOSE_EVT, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_open_fail
+**
+** Description      L2CAP channel open attempt failed.  Deallocate any ccbs
+**                  on this lcb and send connect confirm event with failure.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_open_fail(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB           *p_ccb = &avct_cb.ccb[0];
+    int                 i;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb))
+        {
+            avct_ccb_dealloc(p_ccb, AVCT_CONNECT_CFM_EVT,
+                             p_data->result, p_lcb->peer_addr);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_close_ind
+**
+** Description      L2CAP channel closed by peer.  Deallocate any initiator
+**                  ccbs on this lcb and send disconnect ind event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_close_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB           *p_ccb = &avct_cb.ccb[0];
+    int                 i;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb))
+        {
+            if (p_ccb->cc.role == AVCT_INT)
+            {
+                avct_ccb_dealloc(p_ccb, AVCT_DISCONNECT_IND_EVT,
+                                 0, p_lcb->peer_addr);
+            }
+            else
+            {
+                p_ccb->p_lcb = NULL;
+                (*p_ccb->cc.p_ctrl_cback)(avct_ccb_to_idx(p_ccb), AVCT_DISCONNECT_IND_EVT,
+                                          0, p_lcb->peer_addr);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_close_cfm
+**
+** Description      L2CAP channel closed by us.  Deallocate any initiator
+**                  ccbs on this lcb and send disconnect ind or cfm event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_close_cfm(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB           *p_ccb = &avct_cb.ccb[0];
+    int                 i;
+    UINT8               event;
+
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb))
+        {
+            /* if this ccb initiated close send disconnect cfm otherwise ind */
+            if (p_ccb->ch_close)
+            {
+                p_ccb->ch_close = FALSE;
+                event = AVCT_DISCONNECT_CFM_EVT;
+            }
+            else
+            {
+                event = AVCT_DISCONNECT_IND_EVT;
+            }
+
+            if (p_ccb->cc.role == AVCT_INT)
+            {
+                avct_ccb_dealloc(p_ccb, event, p_data->result, p_lcb->peer_addr);
+            }
+            else
+            {
+                p_ccb->p_lcb = NULL;
+                (*p_ccb->cc.p_ctrl_cback)(avct_ccb_to_idx(p_ccb), event,
+                                       p_data->result, p_lcb->peer_addr);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_bind_conn
+**
+** Description      Bind ccb to lcb and send connect cfm event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_bind_conn(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    p_data->p_ccb->p_lcb = p_lcb;
+    (*p_data->p_ccb->cc.p_ctrl_cback)(avct_ccb_to_idx(p_data->p_ccb),
+                                      AVCT_CONNECT_CFM_EVT, 0, p_lcb->peer_addr);
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_chk_disc
+**
+** Description      A ccb wants to close; if it is the last ccb on this lcb,
+**                  close channel.  Otherwise just deallocate and call
+**                  callback.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_chk_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    AVCT_TRACE_WARNING0("avct_lcb_chk_disc");
+#if (AVCT_BROWSE_INCLUDED == TRUE)
+    avct_close_bcb(p_lcb, p_data);
+#endif
+    if (avct_lcb_last_ccb(p_lcb, p_data->p_ccb))
+    {
+        AVCT_TRACE_WARNING0("closing");
+        p_data->p_ccb->ch_close = TRUE;
+        avct_lcb_event(p_lcb, AVCT_LCB_INT_CLOSE_EVT, p_data);
+    }
+    else
+    {
+        AVCT_TRACE_WARNING0("dealloc ccb");
+        avct_lcb_unbind_disc(p_lcb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_chnl_disc
+**
+** Description      Disconnect L2CAP channel.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_chnl_disc(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    L2CA_DisconnectReq(p_lcb->ch_lcid);
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_bind_fail
+**
+** Description      Deallocate ccb and call callback with connect event
+**                  with failure result.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_bind_fail(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    avct_ccb_dealloc(p_data->p_ccb, AVCT_CONNECT_CFM_EVT, AVCT_RESULT_FAIL, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_cong_ind
+**
+** Description      Handle congestion indication from L2CAP.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_cong_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    tAVCT_CCB           *p_ccb = &avct_cb.ccb[0];
+    int                 i;
+    UINT8               event;
+    BT_HDR          *p_buf;
+
+    /* set event */
+    event = (p_data->cong) ? AVCT_CONG_IND_EVT : AVCT_UNCONG_IND_EVT;
+    p_lcb->cong = p_data->cong;
+    if (p_lcb->cong == FALSE && GKI_getfirst(&p_lcb->tx_q))
+    {
+        while ( !p_lcb->cong  && (p_buf = (BT_HDR *)GKI_dequeue(&p_lcb->tx_q)) != NULL)
+        {
+            if (L2CA_DataWrite(p_lcb->ch_lcid, p_buf) == L2CAP_DW_CONGESTED)
+            {
+                p_lcb->cong = TRUE;
+            }
+        }
+    }
+
+    /* send event to all ccbs on this lcb */
+    for (i = 0; i < AVCT_NUM_CONN; i++, p_ccb++)
+    {
+        if (p_ccb->allocated && (p_ccb->p_lcb == p_lcb))
+        {
+            (*p_ccb->cc.p_ctrl_cback)(avct_ccb_to_idx(p_ccb), event, 0, p_lcb->peer_addr);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_discard_msg
+**
+** Description      Discard a message sent in from the API.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_discard_msg(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    AVCT_TRACE_WARNING0("Dropping msg");
+
+    GKI_freebuf(p_data->ul_msg.p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_send_msg
+**
+** Description      Build and send an AVCTP message.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_send_msg(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    UINT16          curr_msg_len;
+    UINT8           pkt_type;
+    UINT8           hdr_len;
+    BT_HDR          *p_buf;
+    UINT8           *p;
+    UINT8           nosp = 0;       /* number of subsequent packets */
+    UINT16          temp;
+    UINT16          buf_size = p_lcb->peer_mtu + L2CAP_MIN_OFFSET + BT_HDR_SIZE;
+
+
+    /* store msg len */
+    curr_msg_len = p_data->ul_msg.p_buf->len;
+
+    /* initialize packet type and other stuff */
+    if (curr_msg_len <= (p_lcb->peer_mtu - AVCT_HDR_LEN_SINGLE))
+    {
+        pkt_type = AVCT_PKT_TYPE_SINGLE;
+    }
+    else
+    {
+        pkt_type = AVCT_PKT_TYPE_START;
+        temp = (curr_msg_len + AVCT_HDR_LEN_START - p_lcb->peer_mtu);
+        nosp = temp / (p_lcb->peer_mtu - 1) + 1;
+        if ( (temp % (p_lcb->peer_mtu - 1)) != 0)
+            nosp++;
+    }
+
+    /* while we haven't sent all packets */
+    while (curr_msg_len != 0)
+    {
+        /* set header len */
+        hdr_len = avct_lcb_pkt_type_len[pkt_type];
+
+        /* if remaining msg must be fragmented */
+        if (p_data->ul_msg.p_buf->len > (p_lcb->peer_mtu - hdr_len))
+        {
+            /* get a new buffer for fragment we are sending */
+            if ((p_buf = (BT_HDR *) GKI_getbuf(buf_size)) == NULL)
+            {
+                /* whoops; free original msg buf and bail */
+                AVCT_TRACE_ERROR0 ("avct_lcb_send_msg cannot alloc buffer!!");
+                GKI_freebuf(p_data->ul_msg.p_buf);
+                break;
+            }
+
+            /* copy portion of data from current message to new buffer */
+            p_buf->offset = L2CAP_MIN_OFFSET + hdr_len;
+            p_buf->len = p_lcb->peer_mtu - hdr_len;
+
+            memcpy((UINT8 *)(p_buf + 1) + p_buf->offset,
+                   (UINT8 *)(p_data->ul_msg.p_buf + 1) + p_data->ul_msg.p_buf->offset, p_buf->len);
+
+            p_data->ul_msg.p_buf->offset += p_buf->len;
+            p_data->ul_msg.p_buf->len -= p_buf->len;
+        }
+        else
+        {
+            p_buf = p_data->ul_msg.p_buf;
+        }
+
+        curr_msg_len -= p_buf->len;
+
+        /* set up to build header */
+        p_buf->len += hdr_len;
+        p_buf->offset -= hdr_len;
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+        /* build header */
+        AVCT_BLD_HDR(p, p_data->ul_msg.label, pkt_type, p_data->ul_msg.cr);
+        if (pkt_type == AVCT_PKT_TYPE_START)
+        {
+            UINT8_TO_STREAM(p, nosp);
+        }
+        if ((pkt_type == AVCT_PKT_TYPE_START) || (pkt_type == AVCT_PKT_TYPE_SINGLE))
+        {
+            UINT16_TO_BE_STREAM(p, p_data->ul_msg.p_ccb->cc.pid);
+        }
+
+        if (p_lcb->cong == TRUE)
+        {
+            GKI_enqueue (&p_lcb->tx_q, p_buf);
+        }
+
+        /* send message to L2CAP */
+        else
+        {
+            if (L2CA_DataWrite(p_lcb->ch_lcid, p_buf) == L2CAP_DW_CONGESTED)
+            {
+                p_lcb->cong = TRUE;
+            }
+        }
+
+        /* update pkt type for next packet */
+        if (curr_msg_len > (p_lcb->peer_mtu - AVCT_HDR_LEN_END))
+        {
+            pkt_type = AVCT_PKT_TYPE_CONT;
+        }
+        else
+        {
+            pkt_type = AVCT_PKT_TYPE_END;
+        }
+    }
+    AVCT_TRACE_DEBUG1 ("avct_lcb_send_msg tx_q_count:%d", p_lcb->tx_q.count);
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_free_msg_ind
+**
+** Description      Discard an incoming AVCTP message.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_free_msg_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    if (p_data)
+        GKI_freebuf(p_data->p_buf);
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         avct_lcb_msg_ind
+**
+** Description      Handle an incoming AVCTP message.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avct_lcb_msg_ind(tAVCT_LCB *p_lcb, tAVCT_LCB_EVT *p_data)
+{
+    UINT8       *p;
+    UINT8       label, type, cr_ipid;
+    UINT16      pid;
+    tAVCT_CCB   *p_ccb;
+    BT_HDR      *p_buf;
+
+    /* this p_buf is to be reported through p_msg_cback. The layer_specific
+     * needs to be set properly to indicate that it is received through
+     * control channel */
+    p_data->p_buf->layer_specific = AVCT_DATA_CTRL;
+
+    /* reassemble message; if no message available (we received a fragment) return */
+    if ((p_data->p_buf = avct_lcb_msg_asmbl(p_lcb, p_data->p_buf)) == NULL)
+    {
+        return;
+    }
+
+    p = (UINT8 *)(p_data->p_buf + 1) + p_data->p_buf->offset;
+
+    /* parse header byte */
+    AVCT_PRS_HDR(p, label, type, cr_ipid);
+
+    /* check for invalid cr_ipid */
+    if (cr_ipid == AVCT_CR_IPID_INVALID)
+    {
+        AVCT_TRACE_WARNING1("Invalid cr_ipid", cr_ipid);
+        GKI_freebuf(p_data->p_buf);
+        return;
+    }
+
+    /* parse and lookup PID */
+    BE_STREAM_TO_UINT16(pid, p);
+    if ((p_ccb = avct_lcb_has_pid(p_lcb, pid)) != NULL)
+    {
+        /* PID found; send msg up, adjust bt hdr and call msg callback */
+        p_data->p_buf->offset += AVCT_HDR_LEN_SINGLE;
+        p_data->p_buf->len -= AVCT_HDR_LEN_SINGLE;
+        (*p_ccb->cc.p_msg_cback)(avct_ccb_to_idx(p_ccb), label, cr_ipid, p_data->p_buf);
+    }
+    else
+    {
+        /* PID not found; drop message */
+        AVCT_TRACE_WARNING1("No ccb for PID=%x", pid);
+        GKI_freebuf(p_data->p_buf);
+
+        /* if command send reject */
+        if (cr_ipid == AVCT_CMD)
+        {
+            if ((p_buf = (BT_HDR *) GKI_getpoolbuf(AVCT_CMD_POOL_ID)) != NULL)
+            {
+                p_buf->len = AVCT_HDR_LEN_SINGLE;
+                p_buf->offset = AVCT_MSG_OFFSET - AVCT_HDR_LEN_SINGLE;
+                p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+                AVCT_BLD_HDR(p, label, AVCT_PKT_TYPE_SINGLE, AVCT_REJ);
+                UINT16_TO_BE_STREAM(p, pid);
+                L2CA_DataWrite(p_lcb->ch_lcid, p_buf);
+            }
+        }
+    }
+}
diff --git a/stack/avdt/avdt_ad.c b/stack/avdt/avdt_ad.c
new file mode 100644
index 0000000..92f429a
--- /dev/null
+++ b/stack/avdt/avdt_ad.c
@@ -0,0 +1,628 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the AVDTP adaption layer.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "wcassert.h"
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_type_to_tcid
+**
+** Description      Derives the TCID from the channel type and SCB.
+**
+**
+** Returns          TCID value.
+**
+*******************************************************************************/
+UINT8 avdt_ad_type_to_tcid(UINT8 type, tAVDT_SCB *p_scb)
+{
+    UINT8 scb_idx;
+
+    if (type == AVDT_CHAN_SIG)
+    {
+        return 0;
+    }
+    else
+    {
+        scb_idx = avdt_scb_to_hdl(p_scb) - 1;
+        /*
+        AVDT_TRACE_DEBUG2("type: %d, tcid: %d", type, ((scb_idx * (AVDT_CHAN_NUM_TYPES - 1)) + type));
+        */
+        return ((scb_idx * (AVDT_CHAN_NUM_TYPES - 1)) + type);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tcid_to_type
+**
+** Description      Derives the channel type from the TCID.
+**
+**
+** Returns          Channel type value.
+**
+*******************************************************************************/
+static UINT8 avdt_ad_tcid_to_type(UINT8 tcid)
+{
+    UINT8 type;
+
+    if (tcid == 0)
+    {
+        type = AVDT_CHAN_SIG;
+    }
+    else
+    {
+        /* tcid translates to type based on number of channels, as follows:
+        ** only media channel   :  tcid=1,2,3,4,5,6...  type=1,1,1,1,1,1...
+        ** media and report     :  tcid=1,2,3,4,5,6...  type=1,2,1,2,1,2...
+        ** media, report, recov :  tcid=1,2,3,4,5,6...  type=1,2,3,1,2,3...
+        */
+        type = ((tcid + AVDT_CHAN_NUM_TYPES - 2) % (AVDT_CHAN_NUM_TYPES - 1)) + 1;
+    }
+    AVDT_TRACE_DEBUG2("tcid: %d, type: %d", tcid, type);
+    return type;
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_init
+**
+** Description      Initialize adaption layer.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_init(void)
+{
+    int             i;
+    tAVDT_TC_TBL    *p_tbl = avdt_cb.ad.tc_tbl;
+    memset(&avdt_cb.ad, 0, sizeof(tAVDT_AD));
+
+    /* make sure the peer_mtu is a valid value */
+    for (i = 0; i < AVDT_NUM_TC_TBL; i++, p_tbl++)
+    {
+        p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_tbl_by_st
+**
+** Description      Find adaption layer transport channel table entry matching
+**                  the given state.
+**
+**
+** Returns          Pointer to matching entry.  For control channel it returns
+**                  the matching entry.  For media or other it returns the
+**                  first matching entry (there could be more than one).
+**
+*******************************************************************************/
+tAVDT_TC_TBL *avdt_ad_tc_tbl_by_st(UINT8 type, tAVDT_CCB *p_ccb, UINT8 state)
+{
+    int             i;
+    tAVDT_TC_TBL    *p_tbl = avdt_cb.ad.tc_tbl;
+    UINT8           ccb_idx;
+
+    if (p_ccb == NULL)
+    {
+        /* resending security req */
+        for (i = 0; i < AVDT_NUM_TC_TBL; i++, p_tbl++)
+        {
+            /* must be AVDT_CHAN_SIG - tcid always zero */
+            if ((p_tbl->tcid == 0) &&
+                (p_tbl->state == state))
+            {
+                break;
+            }
+        }
+    }
+    else
+    {
+        ccb_idx = avdt_ccb_to_idx(p_ccb);
+
+        for (i = 0; i < AVDT_NUM_TC_TBL; i++, p_tbl++)
+        {
+            if (type == AVDT_CHAN_SIG)
+            {
+                /* if control channel, tcid always zero */
+                if ((p_tbl->tcid == 0) &&
+                    (p_tbl->ccb_idx == ccb_idx) &&
+                    (p_tbl->state == state))
+                {
+                    break;
+                }
+            }
+            else
+            {
+                /* if other channel, tcid is always > zero */
+                if ((p_tbl->tcid > 0) &&
+                    (p_tbl->ccb_idx == ccb_idx) &&
+                    (p_tbl->state == state))
+                {
+                    break;
+                }
+            }
+        }
+    }
+
+    /* if nothing found return null */
+    if (i == AVDT_NUM_TC_TBL)
+    {
+        p_tbl = NULL;
+    }
+
+    return p_tbl;
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_tbl_by_lcid
+**
+** Description      Find adaption layer transport channel table entry by LCID.
+**
+**
+** Returns          Pointer to entry.
+**
+*******************************************************************************/
+tAVDT_TC_TBL *avdt_ad_tc_tbl_by_lcid(UINT16 lcid)
+{
+    UINT8 idx;
+
+    idx = avdt_cb.ad.lcid_tbl[lcid - L2CAP_BASE_APPL_CID];
+
+    if (idx < AVDT_NUM_TC_TBL)
+    {
+        return &avdt_cb.ad.tc_tbl[idx];
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_tbl_by_type
+**
+** Description      This function retrieves the transport channel table entry
+**                  for a particular channel.
+**
+**
+** Returns          Pointer to transport channel table entry.
+**
+*******************************************************************************/
+tAVDT_TC_TBL *avdt_ad_tc_tbl_by_type(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb)
+{
+    UINT8           tcid;
+    int             i;
+    tAVDT_TC_TBL    *p_tbl = avdt_cb.ad.tc_tbl;
+    UINT8           ccb_idx = avdt_ccb_to_idx(p_ccb);
+
+    /* get tcid from type, scb */
+    tcid = avdt_ad_type_to_tcid(type, p_scb);
+
+    for (i = 0; i < AVDT_NUM_TC_TBL; i++, p_tbl++)
+    {
+        if ((p_tbl->tcid == tcid) && (p_tbl->ccb_idx == ccb_idx))
+        {
+            break;
+        }
+    }
+
+    WC_ASSERT(i != AVDT_NUM_TC_TBL);
+
+    return p_tbl;
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_tbl_alloc
+**
+** Description      Allocate an entry in the traffic channel table.
+**
+**
+** Returns          Pointer to entry.
+**
+*******************************************************************************/
+tAVDT_TC_TBL *avdt_ad_tc_tbl_alloc(tAVDT_CCB *p_ccb)
+{
+    int             i;
+    tAVDT_TC_TBL    *p_tbl = avdt_cb.ad.tc_tbl;
+
+    /* find next free entry in tc table */
+    for (i = 0; i < AVDT_NUM_TC_TBL; i++, p_tbl++)
+    {
+        if (p_tbl->state == AVDT_AD_ST_UNUSED)
+        {
+            break;
+        }
+    }
+
+    /* sanity check */
+    WC_ASSERT(i != AVDT_NUM_TC_TBL);
+
+    /* initialize entry */
+    p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+    p_tbl->cfg_flags = 0;
+    p_tbl->ccb_idx = avdt_ccb_to_idx(p_ccb);
+    p_tbl->state = AVDT_AD_ST_IDLE;
+
+    return p_tbl;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_tbl_to_idx
+**
+** Description      Convert a transport channel table entry to an index.
+**
+**
+** Returns          Index value.
+**
+*******************************************************************************/
+UINT8 avdt_ad_tc_tbl_to_idx(tAVDT_TC_TBL *p_tbl)
+{
+    AVDT_TRACE_DEBUG1("avdt_ad_tc_tbl_to_idx: %d", (p_tbl - avdt_cb.ad.tc_tbl));
+    /* use array arithmetic to determine index */
+    return (UINT8) (p_tbl - avdt_cb.ad.tc_tbl);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_close_ind
+**
+** Description      This function is called by the L2CAP interface when the
+**                  L2CAP channel is closed.  It looks up the CCB or SCB for
+**                  the channel and sends it a close event.  The reason
+**                  parameter is the same value passed by the L2CAP
+**                  callback function.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_tc_close_ind(tAVDT_TC_TBL *p_tbl, UINT16 reason)
+{
+    tAVDT_CCB   *p_ccb;
+    tAVDT_SCB   *p_scb;
+    tAVDT_SCB_TC_CLOSE  close;
+
+    close.old_tc_state = p_tbl->state;
+    /* clear avdt_ad_tc_tbl entry */
+    p_tbl->state = AVDT_AD_ST_UNUSED;
+    p_tbl->cfg_flags = 0;
+    p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+
+    AVDT_TRACE_DEBUG2("avdt_ad_tc_close_ind tcid: %d, old: %d",
+        p_tbl->tcid, close.old_tc_state);
+    /* if signaling channel, notify ccb that channel open */
+    if (p_tbl->tcid == 0)
+    {
+        p_ccb = avdt_ccb_by_idx(p_tbl->ccb_idx);
+        avdt_ccb_event(p_ccb, AVDT_CCB_LL_CLOSE_EVT, NULL);
+    }
+    /* if media or other channel, notify scb that channel close */
+    else
+    {
+        /* look up scb in stream routing table by ccb, tcid */
+        p_scb = avdt_scb_by_hdl(avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][p_tbl->tcid].scb_hdl);
+        if (p_scb != NULL)
+        {
+            close.tcid = p_tbl->tcid;
+            close.type = avdt_ad_tcid_to_type(p_tbl->tcid);
+            avdt_scb_event(p_scb, AVDT_SCB_TC_CLOSE_EVT, (tAVDT_SCB_EVT *)&close);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_open_ind
+**
+** Description      This function is called by the L2CAP interface when
+**                  the L2CAP channel is opened.  It looks up the CCB or SCB
+**                  for the channel and sends it an open event.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_tc_open_ind(tAVDT_TC_TBL *p_tbl)
+{
+    tAVDT_CCB   *p_ccb;
+    tAVDT_SCB   *p_scb;
+    tAVDT_OPEN  open;
+    tAVDT_EVT_HDR evt;
+
+    p_tbl->state = AVDT_AD_ST_OPEN;
+
+    /* if signaling channel, notify ccb that channel open */
+    if (p_tbl->tcid == 0)
+    {
+        /* set the signal channel to use high priority within the ACL link */
+        L2CA_SetTxPriority(avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][AVDT_CHAN_SIG].lcid, L2CAP_CHNL_PRIORITY_HIGH);
+
+        p_ccb = avdt_ccb_by_idx(p_tbl->ccb_idx);
+        /* use err_param to indicate the role of connection.
+         * AVDT_ACP, if ACP */
+        evt.err_param = AVDT_INT;
+        if(p_tbl->cfg_flags & AVDT_L2C_CFG_CONN_ACP)
+        {
+            evt.err_param = AVDT_ACP;
+        }
+        avdt_ccb_event(p_ccb, AVDT_CCB_LL_OPEN_EVT, (tAVDT_CCB_EVT *)&evt);
+    }
+    /* if media or other channel, notify scb that channel open */
+    else
+    {
+        /* look up scb in stream routing table by ccb, tcid */
+        p_scb = avdt_scb_by_hdl(avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][p_tbl->tcid].scb_hdl);
+
+        /* put lcid in event data */
+        if (p_scb != NULL)
+        {
+            open.peer_mtu = p_tbl->peer_mtu;
+            open.lcid = avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][p_tbl->tcid].lcid;
+            open.hdr.err_code = avdt_ad_tcid_to_type(p_tbl->tcid);
+            avdt_scb_event(p_scb, AVDT_SCB_TC_OPEN_EVT, (tAVDT_SCB_EVT *) &open);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_cong_ind
+**
+** Description      This function is called by the L2CAP interface layer when
+**                  L2CAP calls the congestion callback.  It looks up the CCB
+**                  or SCB for the channel and sends it a congestion event.
+**                  The is_congested parameter is the same value passed by
+**                  the L2CAP callback function.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_tc_cong_ind(tAVDT_TC_TBL *p_tbl, BOOLEAN is_congested)
+{
+    tAVDT_CCB   *p_ccb;
+    tAVDT_SCB   *p_scb;
+
+    /* if signaling channel, notify ccb of congestion */
+    if (p_tbl->tcid == 0)
+    {
+        p_ccb = avdt_ccb_by_idx(p_tbl->ccb_idx);
+        avdt_ccb_event(p_ccb, AVDT_CCB_LL_CONG_EVT, (tAVDT_CCB_EVT *) &is_congested);
+    }
+    /* if media or other channel, notify scb that channel open */
+    else
+    {
+        /* look up scb in stream routing table by ccb, tcid */
+        p_scb = avdt_scb_by_hdl(avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][p_tbl->tcid].scb_hdl);
+        if (p_scb != NULL)
+        {
+            avdt_scb_event(p_scb, AVDT_SCB_TC_CONG_EVT, (tAVDT_SCB_EVT *) &is_congested);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_tc_data_ind
+**
+** Description      This function is called by the L2CAP interface layer when
+**                  incoming data is received from L2CAP.  It looks up the CCB
+**                  or SCB for the channel and routes the data accordingly.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_tc_data_ind(tAVDT_TC_TBL *p_tbl, BT_HDR *p_buf)
+{
+    tAVDT_CCB   *p_ccb;
+    tAVDT_SCB   *p_scb;
+
+    /* store type (media, recovery, reporting) */
+    p_buf->layer_specific = avdt_ad_tcid_to_type(p_tbl->tcid);
+
+
+    /* if signaling channel, handle control message */
+    if (p_tbl->tcid == 0)
+    {
+        p_ccb = avdt_ccb_by_idx(p_tbl->ccb_idx);
+        avdt_msg_ind(p_ccb, p_buf);
+    }
+    /* if media or other channel, send event to scb */
+    else
+    {
+        p_scb = avdt_scb_by_hdl(avdt_cb.ad.rt_tbl[p_tbl->ccb_idx][p_tbl->tcid].scb_hdl);
+        if (p_scb != NULL)
+        {
+            avdt_scb_event(p_scb, AVDT_SCB_TC_DATA_EVT, (tAVDT_SCB_EVT *) &p_buf);
+        }
+        else
+            GKI_freebuf(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_write_req
+**
+** Description      This function is called by a CCB or SCB to send data to a
+**                  transport channel.  It looks up the LCID of the channel
+**                  based on the type, CCB, and SCB (if present).  Then it
+**                  passes the data to L2CA_DataWrite().
+**
+**
+** Returns          AVDT_AD_SUCCESS, if data accepted, else FALSE
+**                  AVDT_AD_CONGESTED, if data accepted and the channel is congested
+**                  AVDT_AD_FAILED, if error
+**
+*******************************************************************************/
+UINT8 avdt_ad_write_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb, BT_HDR *p_buf)
+{
+    UINT8   tcid;
+
+    /* get tcid from type, scb */
+    tcid = avdt_ad_type_to_tcid(type, p_scb);
+
+
+    return L2CA_DataWrite(avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ad_open_req
+**
+** Description      This function is called by a CCB or SCB to open a transport
+**                  channel.  This function allocates and initializes a
+**                  transport channel table entry.  The channel can be opened
+**                  in two roles:  as an initiator or acceptor.  When opened
+**                  as an initiator the function will start an L2CAP connection.
+**                  When opened as an acceptor the function simply configures
+**                  the table entry to listen for an incoming channel.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_open_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb, UINT8 role)
+{
+    tAVDT_TC_TBL    *p_tbl;
+    UINT16          lcid;
+
+    p_tbl = avdt_ad_tc_tbl_alloc(p_ccb);
+
+    p_tbl->tcid = avdt_ad_type_to_tcid(type, p_scb);
+    AVDT_TRACE_DEBUG3("avdt_ad_open_req: type: %d, role: %d, tcid:%d",
+        type, role, p_tbl->tcid);
+
+    if (type == AVDT_CHAN_SIG)
+    {
+        /* if signaling, get mtu from registration control block */
+        p_tbl->my_mtu = avdt_cb.rcb.ctrl_mtu;
+        p_tbl->my_flush_to = L2CAP_DEFAULT_FLUSH_TO;
+    }
+    else
+    {
+        /* otherwise get mtu from scb */
+        p_tbl->my_mtu = p_scb->cs.mtu;
+        p_tbl->my_flush_to = p_scb->cs.flush_to;
+
+        /* also set scb_hdl in rt_tbl */
+        avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][p_tbl->tcid].scb_hdl = avdt_scb_to_hdl(p_scb);
+        AVDT_TRACE_DEBUG3("avdt_cb.ad.rt_tbl[%d][%d].scb_hdl = %d",
+            avdt_ccb_to_idx(p_ccb), p_tbl->tcid,
+            avdt_scb_to_hdl(p_scb));
+    }
+
+    /* if we're acceptor, we're done; just sit back and listen */
+    if (role == AVDT_ACP)
+    {
+        p_tbl->state = AVDT_AD_ST_ACP;
+    }
+    /* else we're inititator, start the L2CAP connection */
+    else
+    {
+        p_tbl->state = AVDT_AD_ST_CONN;
+
+        /* call l2cap connect req */
+        if ((lcid = L2CA_ConnectReq(AVDT_PSM, p_ccb->peer_addr)) != 0)
+        {
+            /* if connect req ok, store tcid in lcid table  */
+            avdt_cb.ad.lcid_tbl[lcid - L2CAP_BASE_APPL_CID] = avdt_ad_tc_tbl_to_idx(p_tbl);
+            AVDT_TRACE_DEBUG2("avdt_cb.ad.lcid_tbl[%d] = %d",
+                (lcid - L2CAP_BASE_APPL_CID), avdt_ad_tc_tbl_to_idx(p_tbl));
+
+            avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][p_tbl->tcid].lcid = lcid;
+            AVDT_TRACE_DEBUG3("avdt_cb.ad.rt_tbl[%d][%d].lcid = 0x%x",
+                avdt_ccb_to_idx(p_ccb), p_tbl->tcid,
+                lcid);
+        }
+        else
+        {
+            /* if connect req failed, call avdt_ad_tc_close_ind() */
+            avdt_ad_tc_close_ind(p_tbl, 0);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ad_close_req
+**
+** Description      This function is called by a CCB or SCB to close a
+**                  transport channel.  The function looks up the LCID for the
+**                  channel and calls L2CA_DisconnectReq().
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ad_close_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb)
+{
+    UINT8           tcid;
+    tAVDT_TC_TBL    *p_tbl;
+
+    p_tbl = avdt_ad_tc_tbl_by_type(type, p_ccb, p_scb);
+    AVDT_TRACE_DEBUG1("avdt_ad_close_req state: %d", p_tbl->state);
+
+    switch(p_tbl->state)
+    {
+    case AVDT_AD_ST_UNUSED:
+        /* probably for reporting */
+        break;
+    case AVDT_AD_ST_ACP:
+        /* if we're listening on this channel, send ourselves a close ind */
+        avdt_ad_tc_close_ind(p_tbl, 0);
+        break;
+    default:
+        /* get tcid from type, scb */
+        tcid = avdt_ad_type_to_tcid(type, p_scb);
+
+        /* call l2cap disconnect req */
+        L2CA_DisconnectReq(avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid);
+    }
+}
+
diff --git a/stack/avdt/avdt_api.c b/stack/avdt/avdt_api.c
new file mode 100644
index 0000000..67fe452
--- /dev/null
+++ b/stack/avdt/avdt_api.c
@@ -0,0 +1,1383 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains API of the audio/video distribution transport
+ *  protocol.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "l2c_api.h"
+#include "btm_api.h"
+#include "btu.h"
+
+
+#if (defined BTTRC_INCLUDED && BTTRC_INCLUDED == TRUE)
+#include "bttrc_str_ids.h"
+#endif
+
+/* Control block for AVDT */
+#if AVDT_DYNAMIC_MEMORY == FALSE
+tAVDT_CB avdt_cb;
+#endif
+
+
+/*******************************************************************************
+**
+** Function         avdt_process_timeout
+**
+** Description      This function is called by BTU when an AVDTP timer
+**                  expires.  The function sends a timer event to the
+**                  appropriate CCB or SCB state machine.
+**
+**                  This function is for use internal to the stack only.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_process_timeout(TIMER_LIST_ENT *p_tle)
+{
+    UINT8   event = 0;
+    UINT8   err_code = AVDT_ERR_TIMEOUT;
+
+    switch (p_tle->event)
+    {
+        case BTU_TTYPE_AVDT_CCB_RET:
+            event = AVDT_CCB_RET_TOUT_EVT + AVDT_CCB_MKR;
+            break;
+
+        case BTU_TTYPE_AVDT_CCB_RSP:
+            event = AVDT_CCB_RSP_TOUT_EVT + AVDT_CCB_MKR;
+            break;
+
+        case BTU_TTYPE_AVDT_CCB_IDLE:
+            event = AVDT_CCB_IDLE_TOUT_EVT + AVDT_CCB_MKR;
+            break;
+
+        case BTU_TTYPE_AVDT_SCB_TC:
+            event = AVDT_SCB_TC_TOUT_EVT;
+            break;
+
+        default:
+            break;
+    }
+
+    if (event & AVDT_CCB_MKR)
+    {
+        avdt_ccb_event((tAVDT_CCB *) p_tle->param, (UINT8) (event & ~AVDT_CCB_MKR),
+                       (tAVDT_CCB_EVT *) &err_code);
+    }
+    else
+    {
+        avdt_scb_event((tAVDT_SCB *) p_tle->param, event, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_Register
+**
+** Description      This is the system level registration function for the
+**                  AVDTP protocol.  This function initializes AVDTP and
+**                  prepares the protocol stack for its use.  This function
+**                  must be called once by the system or platform using AVDTP
+**                  before the other functions of the API an be used.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback)
+{
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_REGISTER);
+
+    /* register PSM with L2CAP */
+    L2CA_Register(AVDT_PSM, (tL2CAP_APPL_INFO *) &avdt_l2c_appl);
+
+    /* set security level */
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP, p_reg->sec_mask,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP, p_reg->sec_mask,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG);
+
+    /* do not use security on the media channel */
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_MEDIA);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_MEDIA);
+
+#if AVDT_REPORTING == TRUE
+    /* do not use security on the reporting channel */
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_REPORT);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_AVDTP_NOSEC, BTM_SEC_NONE,
+        AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_REPORT);
+#endif
+
+    /* initialize AVDTP data structures */
+    avdt_scb_init();
+    avdt_ccb_init();
+    avdt_ad_init();
+#if defined(AVDT_INITIAL_TRACE_LEVEL)
+    avdt_cb.trace_level = AVDT_INITIAL_TRACE_LEVEL;
+#else
+    avdt_cb.trace_level = BT_TRACE_LEVEL_NONE;
+#endif
+
+    /* copy registration struct */
+    memcpy(&avdt_cb.rcb, p_reg, sizeof(tAVDT_REG));
+    avdt_cb.p_conn_cback = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_Deregister
+**
+** Description      This function is called to deregister use AVDTP protocol.
+**                  It is called when AVDTP is no longer being used by any
+**                  application in the system.  Before this function can be
+**                  called, all streams must be removed with AVDT_RemoveStream().
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void AVDT_Deregister(void)
+{
+    BTTRC_AVDT_API0(AVDT_TRACE_API_DEREGISTER);
+
+    /* deregister PSM with L2CAP */
+    L2CA_Deregister(AVDT_PSM);
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_CreateStream
+**
+** Description      Create a stream endpoint.  After a stream endpoint is
+**                  created an application can initiate a connection between
+**                  this endpoint and an endpoint on a peer device.  In
+**                  addition, a peer device can discover, get the capabilities,
+**                  and connect to this endpoint.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs)
+{
+    UINT16      result = AVDT_SUCCESS;
+    tAVDT_SCB   *p_scb;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_CREATESTREAM);
+
+    /* Verify parameters; if invalid, return failure */
+    if (((p_cs->cfg.psc_mask & (~AVDT_PSC)) != 0) || (p_cs->p_ctrl_cback == NULL))
+    {
+        result = AVDT_BAD_PARAMS;
+    }
+    /* Allocate scb; if no scbs, return failure */
+    else if ((p_scb = avdt_scb_alloc(p_cs)) == NULL)
+    {
+        result = AVDT_NO_RESOURCES;
+    }
+    else
+    {
+        *p_handle = avdt_scb_to_hdl(p_scb);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_RemoveStream
+**
+** Description      Remove a stream endpoint.  This function is called when
+**                  the application is no longer using a stream endpoint.
+**                  If this function is called when the endpoint is connected
+**                  the connection is closed and then the stream endpoint
+**                  is removed.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_RemoveStream(UINT8 handle)
+{
+    UINT16      result = AVDT_SUCCESS;
+    tAVDT_SCB   *p_scb;
+
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_REMOVESTREAM);
+
+    /* look up scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    else
+    {
+        /* send remove event to scb */
+        avdt_scb_event(p_scb, AVDT_SCB_API_REMOVE_EVT, NULL);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_DiscoverReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and discovers
+**                  the stream endpoints on the peer device.  (Please note
+**                  that AVDTP discovery is unrelated to SDP discovery).
+**                  This function can be called at any time regardless of whether
+**                  there is an AVDTP connection to the peer device.
+**
+**                  When discovery is complete, an AVDT_DISCOVER_CFM_EVT
+**                  is sent to the application via its callback function.
+**                  The application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again to the same device until
+**                  discovery is complete.
+**
+**                  The memory addressed by sep_info is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the discovery procedure.  This memory must remain
+**                  accessible until the application receives the
+**                  AVDT_DISCOVER_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info,
+                        UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback)
+{
+    tAVDT_CCB       *p_ccb;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_CCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_DISCOVER_REQ);
+
+    /* find channel control block for this bd addr; if none, allocate one */
+    if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL)
+        {
+            /* could not allocate channel control block */
+            result = AVDT_NO_RESOURCES;
+        }
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        /* make sure no discovery or get capabilities req already in progress */
+        if (p_ccb->proc_busy)
+        {
+            result = AVDT_BUSY;
+        }
+        /* send event to ccb */
+        else
+        {
+            evt.discover.p_sep_info = p_sep_info;
+            evt.discover.num_seps = max_seps;
+            evt.discover.p_cback = p_cback;
+            avdt_ccb_event(p_ccb, AVDT_CCB_API_DISCOVER_REQ_EVT, &evt);
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_get_cap_req
+**
+** Description      internal function to serve both AVDT_GetCapReq and
+**                  AVDT_GetAllCapReq
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+static UINT16 avdt_get_cap_req(BD_ADDR bd_addr, tAVDT_CCB_API_GETCAP *p_evt)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    UINT16          result = AVDT_SUCCESS;
+
+    /* verify SEID */
+    if ((p_evt->single.seid < AVDT_SEID_MIN) || (p_evt->single.seid > AVDT_SEID_MAX))
+    {
+        AVDT_TRACE_ERROR1("seid: %d", p_evt->single.seid);
+        result = AVDT_BAD_PARAMS;
+    }
+    /* find channel control block for this bd addr; if none, allocate one */
+    else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL)
+        {
+            /* could not allocate channel control block */
+            result = AVDT_NO_RESOURCES;
+        }
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        /* make sure no discovery or get capabilities req already in progress */
+        if (p_ccb->proc_busy)
+        {
+            result = AVDT_BUSY;
+        }
+        /* send event to ccb */
+        else
+        {
+            avdt_ccb_event(p_ccb, AVDT_CCB_API_GETCAP_REQ_EVT, (tAVDT_CCB_EVT *)p_evt);
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_GetCapReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and gets the
+**                  capabilities of a stream endpoint on the peer device.
+**                  This function can be called at any time regardless of
+**                  whether there is an AVDTP connection to the peer device.
+**
+**                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
+**                  sent to the application via its callback function.  The
+**                  application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again until the procedure is complete.
+**
+**                  The memory pointed to by p_cfg is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the get capabilities procedure.  This memory must
+**                  remain accessible until the application receives
+**                  the AVDT_GETCAP_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback)
+{
+    tAVDT_CCB_API_GETCAP    getcap;
+
+    BTTRC_AVDT_API1(AVDT_TRACE_API_GETCAP_REQ, BTTRC_PARAM_UINT8, seid);
+
+    getcap.single.seid = seid;
+    getcap.single.sig_id = AVDT_SIG_GETCAP;
+    getcap.p_cfg = p_cfg;
+    getcap.p_cback = p_cback;
+    return avdt_get_cap_req (bd_addr, &getcap);
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_GetAllCapReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and gets the
+**                  capabilities of a stream endpoint on the peer device.
+**                  This function can be called at any time regardless of
+**                  whether there is an AVDTP connection to the peer device.
+**
+**                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
+**                  sent to the application via its callback function.  The
+**                  application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again until the procedure is complete.
+**
+**                  The memory pointed to by p_cfg is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the get capabilities procedure.  This memory must
+**                  remain accessible until the application receives
+**                  the AVDT_GETCAP_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback)
+{
+    tAVDT_CCB_API_GETCAP    getcap;
+
+    BTTRC_AVDT_API1(AVDT_TRACE_API_GET_ALLCAP_REQ, BTTRC_PARAM_UINT8, seid);
+
+    getcap.single.seid = seid;
+    getcap.single.sig_id = AVDT_SIG_GET_ALLCAP;
+    getcap.p_cfg = p_cfg;
+    getcap.p_cback = p_cback;
+    return avdt_get_cap_req (bd_addr, &getcap);
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_DelayReport
+**
+** Description      This functions sends a Delay Report to the peer device
+**                  that is associated with a particular SEID.
+**                  This function is called by SNK device.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_SCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_DELAY_REPORT);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    else
+    /* send event to scb */
+    {
+        evt.apidelay.hdr.seid   = seid;
+        evt.apidelay.delay      = delay;
+        avdt_scb_event(p_scb, AVDT_SCB_API_DELAY_RPT_REQ_EVT, &evt);
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_OpenReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and connects
+**                  to a stream endpoint on a peer device.  When the connection
+**                  is completed, an AVDT_OPEN_CFM_EVT is sent to the
+**                  application via the control callback function for this handle.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    tAVDT_SCB       *p_scb = NULL;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_SCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_OPEN_REQ);
+
+
+    /* verify SEID */
+    if ((seid < AVDT_SEID_MIN) || (seid > AVDT_SEID_MAX))
+    {
+        result = AVDT_BAD_PARAMS;
+    }
+    /* map handle to scb */
+    else if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* find channel control block for this bd addr; if none, allocate one */
+    else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL)
+        {
+            /* could not allocate channel control block */
+            result = AVDT_NO_RESOURCES;
+        }
+    }
+
+    /* send event to scb */
+    if (result == AVDT_SUCCESS)
+    {
+        evt.msg.config_cmd.hdr.seid = seid;
+        evt.msg.config_cmd.hdr.ccb_idx = avdt_ccb_to_idx(p_ccb);
+        evt.msg.config_cmd.int_seid = handle;
+        evt.msg.config_cmd.p_cfg = p_cfg;
+        avdt_scb_event(p_scb, AVDT_SCB_API_SETCONFIG_REQ_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_ConfigRsp
+**
+** Description      Respond to a configure request from the peer device.  This
+**                  function must be called if the application receives an
+**                  AVDT_CONFIG_IND_EVT through its control callback.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category)
+{
+    tAVDT_SCB       *p_scb;
+    tAVDT_SCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+    UINT8           event_code;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_CONFIG_RSP);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* handle special case when this function is called but peer has not send
+    ** a configuration cmd; ignore and return error result
+    */
+    else if (!p_scb->in_use)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* send event to scb */
+    else
+    {
+        evt.msg.hdr.err_code = error_code;
+        evt.msg.hdr.err_param = category;
+        evt.msg.hdr.label = label;
+        if (error_code == 0)
+        {
+            event_code = AVDT_SCB_API_SETCONFIG_RSP_EVT;
+        }
+        else
+        {
+            event_code = AVDT_SCB_API_SETCONFIG_REJ_EVT;
+        }
+        avdt_scb_event(p_scb, event_code, &evt);
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_StartReq
+**
+** Description      Start one or more stream endpoints.  This initiates the
+**                  transfer of media packets for the streams.  All stream
+**                  endpoints must previously be opened.  When the streams
+**                  are started, an AVDT_START_CFM_EVT is sent to the
+**                  application via the control callback function for each stream.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles)
+{
+    tAVDT_SCB       *p_scb = NULL;
+    tAVDT_CCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+    int             i;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_START_REQ);
+
+    if ((num_handles == 0) || (num_handles > AVDT_NUM_SEPS))
+    {
+        result = AVDT_BAD_PARAMS;
+    }
+    else
+    {
+        /* verify handles */
+        for (i = 0; i < num_handles; i++)
+        {
+            if ((p_scb = avdt_scb_by_hdl(p_handles[i])) == NULL)
+            {
+                result = AVDT_BAD_HANDLE;
+                break;
+            }
+        }
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        if (p_scb->p_ccb == NULL)
+        {
+            result = AVDT_BAD_HANDLE;
+        }
+        else
+        {
+            /* send event to ccb */
+            memcpy(evt.msg.multi.seid_list, p_handles, num_handles);
+            evt.msg.multi.num_seps = num_handles;
+            avdt_ccb_event(p_scb->p_ccb, AVDT_CCB_API_START_REQ_EVT, &evt);
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_SuspendReq
+**
+** Description      Suspend one or more stream endpoints. This suspends the
+**                  transfer of media packets for the streams.  All stream
+**                  endpoints must previously be open and started.  When the
+**                  streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to
+**                  the application via the control callback function for
+**                  each stream.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles)
+{
+    tAVDT_SCB       *p_scb = NULL;
+    tAVDT_CCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+    int             i;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_SUSPEND_REQ);
+
+    if ((num_handles == 0) || (num_handles > AVDT_NUM_SEPS))
+    {
+        result = AVDT_BAD_PARAMS;
+    }
+    else
+    {
+        /* verify handles */
+        for (i = 0; i < num_handles; i++)
+        {
+            if ((p_scb = avdt_scb_by_hdl(p_handles[i])) == NULL)
+            {
+                result = AVDT_BAD_HANDLE;
+                break;
+            }
+        }
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        if (p_scb->p_ccb == NULL)
+        {
+            result = AVDT_BAD_HANDLE;
+        }
+        else
+        {
+            /* send event to ccb */
+            memcpy(evt.msg.multi.seid_list, p_handles, num_handles);
+            evt.msg.multi.num_seps = num_handles;
+            avdt_ccb_event(p_scb->p_ccb, AVDT_CCB_API_SUSPEND_REQ_EVT, &evt);
+        }
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_CloseReq
+**
+** Description      Close a stream endpoint.  This stops the transfer of media
+**                  packets and closes the transport channel associated with
+**                  this stream endpoint.  When the stream is closed, an
+**                  AVDT_CLOSE_CFM_EVT is sent to the application via the
+**                  control callback function for this handle.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_CloseReq(UINT8 handle)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_CLOSE_REQ);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    else
+    /* send event to scb */
+    {
+        avdt_scb_event(p_scb, AVDT_SCB_API_CLOSE_REQ_EVT, NULL);
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_ReconfigReq
+**
+** Description      Reconfigure a stream endpoint.  This allows the application
+**                  to change the codec or content protection capabilities of
+**                  a stream endpoint after it has been opened.  This function
+**                  can only be called if the stream is opened but not started
+**                  or if the stream has been suspended.  When the procedure
+**                  is completed, an AVDT_RECONFIG_CFM_EVT is sent to the
+**                  application via the control callback function for this handle.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_SCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_RECONFIG_REQ);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* send event to scb */
+    else
+    {
+        /* force psc_mask to zero */
+        p_cfg->psc_mask = 0;
+
+        evt.msg.reconfig_cmd.p_cfg = p_cfg;
+        avdt_scb_event(p_scb, AVDT_SCB_API_RECONFIG_REQ_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_ReconfigRsp
+**
+** Description      Respond to a reconfigure request from the peer device.
+**                  This function must be called if the application receives
+**                  an AVDT_RECONFIG_IND_EVT through its control callback.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code, UINT8 category)
+{
+    tAVDT_SCB       *p_scb;
+    tAVDT_SCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_RECONFIG_RSP);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* send event to scb */
+    else
+    {
+        evt.msg.hdr.err_code = error_code;
+        evt.msg.hdr.err_param = category;
+        evt.msg.hdr.label = label;
+        avdt_scb_event(p_scb, AVDT_SCB_API_RECONFIG_RSP_EVT, &evt);
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_SecurityReq
+**
+** Description      Send a security request to the peer device.  When the
+**                  security procedure is completed, an AVDT_SECURITY_CFM_EVT
+**                  is sent to the application via the control callback function
+**                  for this handle.  (Please note that AVDTP security procedures
+**                  are unrelated to Bluetooth link level security.)
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_SCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_SECURITY_REQ);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* send event to scb */
+    else
+    {
+        evt.msg.security_rsp.p_data = p_data;
+        evt.msg.security_rsp.len = len;
+        avdt_scb_event(p_scb, AVDT_SCB_API_SECURITY_REQ_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_SecurityRsp
+**
+** Description      Respond to a security request from the peer device.
+**                  This function must be called if the application receives
+**                  an AVDT_SECURITY_IND_EVT through its control callback.
+**                  (Please note that AVDTP security procedures are unrelated
+**                  to Bluetooth link level security.)
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code,
+                        UINT8 *p_data, UINT16 len)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_SCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_SECURITY_RSP);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    /* send event to scb */
+    else
+    {
+        evt.msg.security_rsp.hdr.err_code = error_code;
+        evt.msg.security_rsp.hdr.label = label;
+        evt.msg.security_rsp.p_data = p_data;
+        evt.msg.security_rsp.len = len;
+        avdt_scb_event(p_scb, AVDT_SCB_API_SECURITY_RSP_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_WriteReq
+**
+** Description      Send a media packet to the peer device.  The stream must
+**                  be started before this function is called.  Also, this
+**                  function can only be called if the stream is a SRC.
+**
+**                  When AVDTP has sent the media packet and is ready for the
+**                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
+**                  application via the control callback.  The application must
+**                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
+**                  call to AVDT_WriteReq().  If the applications calls
+**                  AVDT_WriteReq() before it receives the event the packet
+**                  will not be sent.  The application may make its first call
+**                  to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
+**                  or AVDT_START_IND_EVT.
+**
+**                  The application passes the packet using the BT_HDR structure.
+**                  This structure is described in section 2.1.  The offset
+**                  field must be equal to or greater than AVDT_MEDIA_OFFSET.
+**                  This allows enough space in the buffer for the L2CAP and
+**                  AVDTP headers.
+**
+**                  The memory pointed to by p_pkt must be a GKI buffer
+**                  allocated by the application.  This buffer will be freed
+**                  by the protocol stack; the application must not free
+**                  this buffer.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp, UINT8 m_pt)
+{
+    tAVDT_SCB       *p_scb;
+    tAVDT_SCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_WRITE_REQ);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    else
+    {
+        evt.apiwrite.p_buf = p_pkt;
+        evt.apiwrite.time_stamp = time_stamp;
+        evt.apiwrite.m_pt = m_pt;
+#if AVDT_MULTIPLEXING == TRUE
+        GKI_init_q (&evt.apiwrite.frag_q);
+#endif
+        avdt_scb_event(p_scb, AVDT_SCB_API_WRITE_REQ_EVT, &evt);
+    }
+
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_ConnectReq
+**
+** Description      This function initiates an AVDTP signaling connection
+**                  to the peer device.  When the connection is completed, an
+**                  AVDT_CONNECT_IND_EVT is sent to the application via its
+**                  control callback function.  If the connection attempt fails
+**                  an AVDT_DISCONNECT_IND_EVT is sent.  The security mask
+**                  parameter overrides the outgoing security mask set in
+**                  AVDT_Register().
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask, tAVDT_CTRL_CBACK *p_cback)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_CCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_CONNECT_REQ);
+
+    /* find channel control block for this bd addr; if none, allocate one */
+    if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL)
+        {
+            /* could not allocate channel control block */
+            result = AVDT_NO_RESOURCES;
+        }
+    }
+    else if (p_ccb->ll_opened == FALSE)
+    {
+        AVDT_TRACE_WARNING0("AVDT_ConnectReq: CCB LL is in the middle of opening");
+
+        /* ccb was already allocated for the incoming signalling. */
+        result = AVDT_BUSY;
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        /* send event to ccb */
+        evt.connect.p_cback = p_cback;
+        evt.connect.sec_mask = sec_mask;
+        avdt_ccb_event(p_ccb, AVDT_CCB_API_CONNECT_REQ_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_DisconnectReq
+**
+** Description      This function disconnect an AVDTP signaling connection
+**                  to the peer device.  When disconnected an
+**                  AVDT_DISCONNECT_IND_EVT is sent to the application via its
+**                  control callback function.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    UINT16          result = AVDT_SUCCESS;
+    tAVDT_CCB_EVT   evt;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_DISCONNECT_REQ);
+
+
+    /* find channel control block for this bd addr; if none, error */
+    if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        result = AVDT_BAD_PARAMS;
+    }
+
+    if (result == AVDT_SUCCESS)
+    {
+        /* send event to ccb */
+        evt.disconnect.p_cback = p_cback;
+        avdt_ccb_event(p_ccb, AVDT_CCB_API_DISCONNECT_REQ_EVT, &evt);
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_GetL2CapChannel
+**
+** Description      Get the L2CAP CID used by the handle.
+**
+** Returns          CID if successful, otherwise 0.
+**
+*******************************************************************************/
+UINT16 AVDT_GetL2CapChannel(UINT8 handle)
+{
+    tAVDT_SCB       *p_scb;
+    tAVDT_CCB       *p_ccb;
+    UINT8           tcid;
+    UINT16          lcid = 0;
+
+    /* map handle to scb */
+    if (((p_scb = avdt_scb_by_hdl(handle)) != NULL)
+     && ((p_ccb = p_scb->p_ccb) != NULL))
+    {
+        /* get tcid from type, scb */
+        tcid = avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb);
+
+        lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid;
+    }
+
+    BTTRC_AVDT_API1(AVDT_TRACE_API_GET_L2CAP_CHAN, BTTRC_PARAM_UINT16, lcid);
+
+    return (lcid);
+}
+
+/*******************************************************************************
+**
+** Function         AVDT_GetSignalChannel
+**
+** Description      Get the L2CAP CID used by the signal channel of the given handle.
+**
+** Returns          CID if successful, otherwise 0.
+**
+*******************************************************************************/
+UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr)
+{
+    tAVDT_SCB       *p_scb;
+    tAVDT_CCB       *p_ccb;
+    UINT8           tcid = 0; /* tcid is always 0 for signal channel */
+    UINT16          lcid = 0;
+
+    /* map handle to scb */
+    if (((p_scb = avdt_scb_by_hdl(handle)) != NULL)
+     && ((p_ccb = p_scb->p_ccb) != NULL))
+    {
+        lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid;
+    }
+    else if ((p_ccb = avdt_ccb_by_bd(bd_addr)) != NULL)
+    {
+        lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid;
+    }
+
+    BTTRC_AVDT_API1(AVDT_TRACE_API_GET_SIGNAL_CHAN, BTTRC_PARAM_UINT16, lcid);
+
+    return (lcid);
+}
+
+#if AVDT_MULTIPLEXING == TRUE
+/*******************************************************************************
+**
+** Function         AVDT_WriteDataReq
+**
+** Description      Send a media packet to the peer device.  The stream must
+**                  be started before this function is called.  Also, this
+**                  function can only be called if the stream is a SRC.
+**
+**                  When AVDTP has sent the media packet and is ready for the
+**                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
+**                  application via the control callback.  The application must
+**                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
+**                  call to AVDT_WriteDataReq().  If the applications calls
+**                  AVDT_WriteDataReq() before it receives the event the packet
+**                  will not be sent.  The application may make its first call
+**                  to AVDT_WriteDataReq() after it receives an
+**                  AVDT_START_CFM_EVT or AVDT_START_IND_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_WriteDataReq(UINT8 handle, UINT8 *p_data, UINT32 data_len,
+                                     UINT32 time_stamp, UINT8 m_pt, UINT8 marker)
+{
+
+    tAVDT_SCB       *p_scb;
+    tAVDT_SCB_EVT   evt;
+    UINT16          result = AVDT_SUCCESS;
+
+    BTTRC_AVDT_API1(AVDT_TRACE_API_WRITE_DATA_REQ, BTTRC_PARAM_UINT32, data_len);
+
+    do
+    {
+        /* check length of media frame */
+        if(data_len > AVDT_MAX_MEDIA_SIZE)
+        {
+            result = AVDT_BAD_PARAMS;
+            break;
+        }
+        /* map handle to scb */
+        if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+        {
+            result = AVDT_BAD_HANDLE;
+            break;
+        }
+        AVDT_TRACE_WARNING1("mux_tsid_media:%d", p_scb->curr_cfg.mux_tsid_media);
+
+        if (p_scb->p_pkt != NULL
+            || p_scb->p_ccb == NULL
+            || !GKI_queue_is_empty(&p_scb->frag_q)
+            || p_scb->frag_off != 0
+            || p_scb->curr_cfg.mux_tsid_media == 0)
+        {
+            result = AVDT_ERR_BAD_STATE;
+            AVDT_TRACE_WARNING4("p_scb->p_pkt=%x, p_scb->p_ccb=%x, IsQueueEmpty=%x, p_scb->frag_off=%x",
+                p_scb->p_pkt, p_scb->p_ccb, GKI_queue_is_empty(&p_scb->frag_q), p_scb->frag_off);
+            break;
+        }
+        evt.apiwrite.p_buf = 0; /* it will indicate using of fragments queue frag_q */
+        /* create queue of media fragments */
+        GKI_init_q (&evt.apiwrite.frag_q);
+
+        /* compose fragments from media payload and put fragments into gueue */
+        avdt_scb_queue_frags(p_scb, &p_data, &data_len, &evt.apiwrite.frag_q);
+
+        if(GKI_queue_is_empty(&evt.apiwrite.frag_q))
+        {
+            AVDT_TRACE_WARNING0("AVDT_WriteDataReq out of GKI buffers");
+            result = AVDT_ERR_RESOURCE;
+            break;
+        }
+        evt.apiwrite.data_len = data_len;
+        evt.apiwrite.p_data = p_data;
+
+        /* process the fragments queue */
+        evt.apiwrite.time_stamp = time_stamp;
+        evt.apiwrite.m_pt = m_pt | (marker<<7);
+        avdt_scb_event(p_scb, AVDT_SCB_API_WRITE_REQ_EVT, &evt);
+    } while (0);
+
+#if (BT_USE_TRACES == TRUE)
+    if(result != AVDT_SUCCESS)
+    {
+        AVDT_TRACE_WARNING1("*** AVDT_WriteDataReq failed result=%d",result);
+    }
+#endif
+    return result;
+}
+#endif
+
+#if AVDT_MULTIPLEXING == TRUE
+/*******************************************************************************
+**
+** Function         AVDT_SetMediaBuf
+**
+** Description      Assigns buffer for media packets or forbids using of assigned
+**                  buffer if argument p_buf is NULL. This function can only
+**                  be called if the stream is a SNK.
+**
+**                  AVDTP uses this buffer to reassemble fragmented media packets.
+**                  When AVDTP receives a complete media packet, it calls the
+**                  p_media_cback assigned by AVDT_CreateStream().
+**                  This function can be called during callback to assign a
+**                  different buffer for next media packet or can leave the current
+**                  buffer for next packet.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_SUCCESS;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_SET_MEDIABUF);
+
+    /* map handle to scb */
+    if ((p_scb = avdt_scb_by_hdl(handle)) == NULL)
+    {
+        result = AVDT_BAD_HANDLE;
+    }
+    else
+    {
+        if(p_buf && p_scb->cs.p_media_cback == NULL)
+            result = AVDT_NO_RESOURCES;
+        else
+        {
+            p_scb->p_media_buf = p_buf;
+            p_scb->media_buf_len = buf_len;
+        }
+    }
+
+    return result;
+}
+#endif
+
+#if AVDT_REPORTING == TRUE
+/*******************************************************************************
+**
+** Function         AVDT_SendReport
+**
+** Description
+**
+**
+**
+** Returns
+**
+*******************************************************************************/
+UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type,
+                       tAVDT_REPORT_DATA *p_data)
+{
+    tAVDT_SCB       *p_scb;
+    UINT16          result = AVDT_BAD_PARAMS;
+    BT_HDR          *p_pkt;
+    tAVDT_TC_TBL    *p_tbl;
+    UINT8           *p, *plen, *pm1, *p_end;
+#if AVDT_MULTIPLEXING == TRUE
+    UINT8           *p_al, u;
+#endif
+    UINT32  ssrc;
+    UINT16  len;
+
+    BTTRC_AVDT_API0(AVDT_TRACE_API_SEND_REPORT);
+
+    /* map handle to scb && verify parameters */
+    if (((p_scb = avdt_scb_by_hdl(handle)) != NULL)
+     && (p_scb->p_ccb != NULL)
+     && (((type == AVDT_RTCP_PT_SR) && (p_scb->cs.tsep == AVDT_TSEP_SRC)) ||
+        ((type == AVDT_RTCP_PT_RR) && (p_scb->cs.tsep == AVDT_TSEP_SNK)) ||
+        (type == AVDT_RTCP_PT_SDES)) )
+    {
+        result = AVDT_NO_RESOURCES;
+
+        /* build SR - assume fit in one packet */
+        p_tbl = avdt_ad_tc_tbl_by_type(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb);
+        if((p_tbl->state == AVDT_AD_ST_OPEN) &&
+            (p_pkt = (BT_HDR *)GKI_getbuf(p_tbl->peer_mtu)) != NULL)
+        {
+            p_pkt->offset = L2CAP_MIN_OFFSET;
+            p = (UINT8 *)(p_pkt + 1) + p_pkt->offset;
+#if AVDT_MULTIPLEXING == TRUE
+            if(p_scb->curr_cfg.psc_mask & AVDT_PSC_MUX)
+            {
+                /* Adaptation Layer header later */
+                p_al = p;
+                p += 2;
+            }
+#endif
+            pm1 = p;
+            *p++ = AVDT_MEDIA_OCTET1 | 1;
+            *p++ = type;
+            /* save the location for length */
+            plen = p;
+            p+= 2;
+            ssrc = avdt_scb_gen_ssrc(p_scb);
+            UINT32_TO_BE_STREAM(p, ssrc);
+
+            switch(type)
+            {
+            case AVDT_RTCP_PT_SR:   /* Sender Report */
+                *pm1 = AVDT_MEDIA_OCTET1;
+                UINT32_TO_BE_STREAM(p, p_data->sr.ntp_sec);
+                UINT32_TO_BE_STREAM(p, p_data->sr.ntp_frac);
+                UINT32_TO_BE_STREAM(p, p_data->sr.rtp_time);
+                UINT32_TO_BE_STREAM(p, p_data->sr.pkt_count);
+                UINT32_TO_BE_STREAM(p, p_data->sr.octet_count);
+                break;
+
+            case AVDT_RTCP_PT_RR:   /* Receiver Report */
+                *p++ = p_data->rr.frag_lost;
+                AVDT_TRACE_API1("packet_lost: %d", p_data->rr.packet_lost);
+                p_data->rr.packet_lost &= 0xFFFFFF;
+                AVDT_TRACE_API1("packet_lost: %d", p_data->rr.packet_lost);
+                UINT24_TO_BE_STREAM(p, p_data->rr.packet_lost);
+                UINT32_TO_BE_STREAM(p, p_data->rr.seq_num_rcvd);
+                UINT32_TO_BE_STREAM(p, p_data->rr.jitter);
+                UINT32_TO_BE_STREAM(p, p_data->rr.lsr);
+                UINT32_TO_BE_STREAM(p, p_data->rr.dlsr);
+                break;
+
+            case AVDT_RTCP_PT_SDES: /* Source Description */
+                *p++ = AVDT_RTCP_SDES_CNAME;
+                len = strlen((char *)p_data->cname);
+                if(len > AVDT_MAX_CNAME_SIZE)
+                    len = AVDT_MAX_CNAME_SIZE;
+                *p++ = (UINT8)len;
+                BCM_STRNCPY_S((char *)p, len+1, (char *)p_data->cname, len+1);
+                p += len;
+                break;
+            }
+            p_end = p;
+            len = p - pm1 - 1;
+            UINT16_TO_BE_STREAM(plen, len);
+
+#if AVDT_MULTIPLEXING == TRUE
+            if(p_scb->curr_cfg.psc_mask & AVDT_PSC_MUX)
+            {
+                /* Adaptation Layer header */
+                p = p_al;
+                len++;
+                UINT16_TO_BE_STREAM(p_al, len );
+                /* TSID, no-fragment bit and coding of length(9-bit length field) */
+                u = *p;
+                *p = (p_scb->curr_cfg.mux_tsid_report<<3) | AVDT_ALH_LCODE_9BITM0;
+                if(u)
+                    *p |= AVDT_ALH_LCODE_9BITM1;
+            }
+#endif
+
+            /* set the actual payload length */
+            p_pkt->len = p_end - p;
+            /* send the packet */
+            if(L2CAP_DW_FAILED != avdt_ad_write_req(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb, p_pkt))
+                result = AVDT_SUCCESS;
+        }
+    }
+
+    return result;
+}
+#endif
+
+/******************************************************************************
+**
+** Function         AVDT_SetTraceLevel
+**
+** Description      Sets the trace level for AVDT. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the AVDT tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+UINT8 AVDT_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        avdt_cb.trace_level = new_level;
+
+    return (avdt_cb.trace_level);
+}
+
diff --git a/stack/avdt/avdt_ccb.c b/stack/avdt/avdt_ccb.c
new file mode 100644
index 0000000..9cb40b2
--- /dev/null
+++ b/stack/avdt/avdt_ccb.c
@@ -0,0 +1,464 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the channel control block state machine and
+ *  functions which operate on the channel control block.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "gki.h"
+#include "btu.h"
+
+/*****************************************************************************
+** state machine constants and types
+*****************************************************************************/
+#if AVDT_DEBUG == TRUE
+
+/* verbose state strings for trace */
+const char * const avdt_ccb_st_str[] = {
+    "CCB_IDLE_ST",
+    "CCB_OPENING_ST",
+    "CCB_OPEN_ST",
+    "CCB_CLOSING_ST"
+};
+
+/* verbose event strings for trace */
+const char * const avdt_ccb_evt_str[] = {
+    "API_DISCOVER_REQ_EVT",
+    "API_GETCAP_REQ_EVT",
+    "API_START_REQ_EVT",
+    "API_SUSPEND_REQ_EVT",
+    "API_DISCOVER_RSP_EVT",
+    "API_GETCAP_RSP_EVT",
+    "API_START_RSP_EVT",
+    "API_SUSPEND_RSP_EVT",
+    "API_CONNECT_REQ_EVT",
+    "API_DISCONNECT_REQ_EVT",
+    "MSG_DISCOVER_CMD_EVT",
+    "MSG_GETCAP_CMD_EVT",
+    "MSG_START_CMD_EVT",
+    "MSG_SUSPEND_CMD_EVT",
+    "MSG_DISCOVER_RSP_EVT",
+    "MSG_GETCAP_RSP_EVT",
+    "MSG_START_RSP_EVT",
+    "MSG_SUSPEND_RSP_EVT",
+    "RCVRSP_EVT",
+    "SENDMSG_EVT",
+    "RET_TOUT_EVT",
+    "RSP_TOUT_EVT",
+    "IDLE_TOUT_EVT",
+    "UL_OPEN_EVT",
+    "UL_CLOSE_EVT",
+    "LL_OPEN_EVT",
+    "LL_CLOSE_EVT",
+    "LL_CONG_EVT"
+};
+
+#endif
+
+
+/* action function list */
+const tAVDT_CCB_ACTION avdt_ccb_action[] = {
+    avdt_ccb_chan_open,
+    avdt_ccb_chan_close,
+    avdt_ccb_chk_close,
+    avdt_ccb_hdl_discover_cmd,
+    avdt_ccb_hdl_discover_rsp,
+    avdt_ccb_hdl_getcap_cmd,
+    avdt_ccb_hdl_getcap_rsp,
+    avdt_ccb_hdl_start_cmd,
+    avdt_ccb_hdl_start_rsp,
+    avdt_ccb_hdl_suspend_cmd,
+    avdt_ccb_hdl_suspend_rsp,
+    avdt_ccb_snd_discover_cmd,
+    avdt_ccb_snd_discover_rsp,
+    avdt_ccb_snd_getcap_cmd,
+    avdt_ccb_snd_getcap_rsp,
+    avdt_ccb_snd_start_cmd,
+    avdt_ccb_snd_start_rsp,
+    avdt_ccb_snd_suspend_cmd,
+    avdt_ccb_snd_suspend_rsp,
+    avdt_ccb_clear_cmds,
+    avdt_ccb_cmd_fail,
+    avdt_ccb_free_cmd,
+    avdt_ccb_cong_state,
+    avdt_ccb_ret_cmd,
+    avdt_ccb_snd_cmd,
+    avdt_ccb_snd_msg,
+    avdt_ccb_set_reconn,
+    avdt_ccb_clr_reconn,
+    avdt_ccb_chk_reconn,
+    avdt_ccb_chk_timer,
+    avdt_ccb_set_conn,
+    avdt_ccb_set_disconn,
+    avdt_ccb_do_disconn,
+    avdt_ccb_ll_closed,
+    avdt_ccb_ll_opened,
+    avdt_ccb_dealloc
+};
+
+/* state table information */
+#define AVDT_CCB_ACTIONS            2       /* number of actions */
+#define AVDT_CCB_NEXT_STATE         2       /* position of next state */
+#define AVDT_CCB_NUM_COLS           3       /* number of columns in state tables */
+
+/* state table for idle state */
+const UINT8 avdt_ccb_st_idle[][AVDT_CCB_NUM_COLS] = {
+/* Event                      Action 1                    Action 2                    Next state */
+/* API_DISCOVER_REQ_EVT */   {AVDT_CCB_SND_DISCOVER_CMD,  AVDT_CCB_CHAN_OPEN,         AVDT_CCB_OPENING_ST},
+/* API_GETCAP_REQ_EVT */     {AVDT_CCB_SND_GETCAP_CMD,    AVDT_CCB_CHAN_OPEN,         AVDT_CCB_OPENING_ST},
+/* API_START_REQ_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_SUSPEND_REQ_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_DISCOVER_RSP_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_GETCAP_RSP_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_START_RSP_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_SUSPEND_RSP_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* API_CONNECT_REQ_EVT */    {AVDT_CCB_SET_CONN,          AVDT_CCB_CHAN_OPEN,         AVDT_CCB_OPENING_ST},
+/* API_DISCONNECT_REQ_EVT */ {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_DISCOVER_CMD_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_GETCAP_CMD_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_START_CMD_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_SUSPEND_CMD_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_DISCOVER_RSP_EVT */   {AVDT_CCB_HDL_DISCOVER_RSP,  AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_GETCAP_RSP_EVT */     {AVDT_CCB_HDL_GETCAP_RSP,    AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_START_RSP_EVT */      {AVDT_CCB_HDL_START_RSP,     AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* MSG_SUSPEND_RSP_EVT */    {AVDT_CCB_HDL_SUSPEND_RSP,   AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* RCVRSP_EVT */             {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* SENDMSG_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* RET_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* RSP_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* IDLE_TOUT_EVT */          {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* UL_OPEN_EVT */            {AVDT_CCB_CHAN_OPEN,         AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* UL_CLOSE_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* LL_OPEN_EVT */            {AVDT_CCB_LL_OPENED,         AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* LL_CLOSE_EVT */           {AVDT_CCB_LL_CLOSED,         AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* LL_CONG_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST}
+};
+
+/* state table for opening state */
+const UINT8 avdt_ccb_st_opening[][AVDT_CCB_NUM_COLS] = {
+/* Event                      Action 1                    Action 2                    Next state */
+/* API_DISCOVER_REQ_EVT */   {AVDT_CCB_SND_DISCOVER_CMD,  AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_GETCAP_REQ_EVT */     {AVDT_CCB_SND_GETCAP_CMD,    AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_START_REQ_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_SUSPEND_REQ_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_DISCOVER_RSP_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_GETCAP_RSP_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_START_RSP_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_SUSPEND_RSP_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_CONNECT_REQ_EVT */    {AVDT_CCB_SET_CONN,          AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* API_DISCONNECT_REQ_EVT */ {AVDT_CCB_SET_DISCONN,       AVDT_CCB_DO_DISCONN,        AVDT_CCB_CLOSING_ST},
+/* MSG_DISCOVER_CMD_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_GETCAP_CMD_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_START_CMD_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_SUSPEND_CMD_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_DISCOVER_RSP_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_GETCAP_RSP_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_START_RSP_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* MSG_SUSPEND_RSP_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* RCVRSP_EVT */             {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* SENDMSG_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* RET_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* RSP_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* IDLE_TOUT_EVT */          {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* UL_OPEN_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST},
+/* UL_CLOSE_EVT */           {AVDT_CCB_CLEAR_CMDS,        AVDT_CCB_CHAN_CLOSE,        AVDT_CCB_CLOSING_ST},
+/* LL_OPEN_EVT */            {AVDT_CCB_SND_CMD,           AVDT_CCB_LL_OPENED,         AVDT_CCB_OPEN_ST},
+/* LL_CLOSE_EVT */           {AVDT_CCB_LL_CLOSED,         AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* LL_CONG_EVT */            {AVDT_CCB_CONG_STATE,        AVDT_CCB_IGNORE,            AVDT_CCB_OPENING_ST}
+};
+
+/* state table for open state */
+const UINT8 avdt_ccb_st_open[][AVDT_CCB_NUM_COLS] = {
+/* Event                      Action 1                    Action 2                    Next state */
+/* API_DISCOVER_REQ_EVT */   {AVDT_CCB_SND_DISCOVER_CMD,  AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_GETCAP_REQ_EVT */     {AVDT_CCB_SND_GETCAP_CMD,    AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_START_REQ_EVT */      {AVDT_CCB_SND_START_CMD,     AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_SUSPEND_REQ_EVT */    {AVDT_CCB_SND_SUSPEND_CMD,   AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_DISCOVER_RSP_EVT */   {AVDT_CCB_SND_DISCOVER_RSP,  AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_GETCAP_RSP_EVT */     {AVDT_CCB_SND_GETCAP_RSP,    AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_START_RSP_EVT */      {AVDT_CCB_SND_START_RSP,     AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_SUSPEND_RSP_EVT */    {AVDT_CCB_SND_SUSPEND_RSP,   AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* API_CONNECT_REQ_EVT */    {AVDT_CCB_SET_CONN,          AVDT_CCB_LL_OPENED,         AVDT_CCB_OPEN_ST},
+/* API_DISCONNECT_REQ_EVT */ {AVDT_CCB_SET_DISCONN,       AVDT_CCB_DO_DISCONN,        AVDT_CCB_CLOSING_ST},
+/* MSG_DISCOVER_CMD_EVT */   {AVDT_CCB_HDL_DISCOVER_CMD,  AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* MSG_GETCAP_CMD_EVT */     {AVDT_CCB_HDL_GETCAP_CMD,    AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* MSG_START_CMD_EVT */      {AVDT_CCB_HDL_START_CMD,     AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* MSG_SUSPEND_CMD_EVT */    {AVDT_CCB_HDL_SUSPEND_CMD,   AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* MSG_DISCOVER_RSP_EVT */   {AVDT_CCB_CHK_CLOSE,         AVDT_CCB_HDL_DISCOVER_RSP,  AVDT_CCB_OPEN_ST},
+/* MSG_GETCAP_RSP_EVT */     {AVDT_CCB_CHK_CLOSE,         AVDT_CCB_HDL_GETCAP_RSP,    AVDT_CCB_OPEN_ST},
+/* MSG_START_RSP_EVT */      {AVDT_CCB_HDL_START_RSP,     AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* MSG_SUSPEND_RSP_EVT */    {AVDT_CCB_HDL_SUSPEND_RSP,   AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* RCVRSP_EVT */             {AVDT_CCB_FREE_CMD,          AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* SENDMSG_EVT */            {AVDT_CCB_SND_MSG,           AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* RET_TOUT_EVT */           {AVDT_CCB_RET_CMD,           AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* RSP_TOUT_EVT */           {AVDT_CCB_CMD_FAIL,          AVDT_CCB_SND_CMD,           AVDT_CCB_OPEN_ST},
+/* IDLE_TOUT_EVT */          {AVDT_CCB_CLEAR_CMDS,        AVDT_CCB_CHAN_CLOSE,        AVDT_CCB_CLOSING_ST},
+/* UL_OPEN_EVT */            {AVDT_CCB_CHK_TIMER,         AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* UL_CLOSE_EVT */           {AVDT_CCB_CHK_CLOSE,         AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* LL_OPEN_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_OPEN_ST},
+/* LL_CLOSE_EVT */           {AVDT_CCB_LL_CLOSED,         AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* LL_CONG_EVT */            {AVDT_CCB_CONG_STATE,        AVDT_CCB_SND_MSG,           AVDT_CCB_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 avdt_ccb_st_closing[][AVDT_CCB_NUM_COLS] = {
+/* Event                      Action 1                    Action 2                    Next state */
+/* API_DISCOVER_REQ_EVT */   {AVDT_CCB_SET_RECONN,        AVDT_CCB_SND_DISCOVER_CMD,  AVDT_CCB_CLOSING_ST},
+/* API_GETCAP_REQ_EVT */     {AVDT_CCB_SET_RECONN,        AVDT_CCB_SND_GETCAP_CMD,    AVDT_CCB_CLOSING_ST},
+/* API_START_REQ_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_SUSPEND_REQ_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_DISCOVER_RSP_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_GETCAP_RSP_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_START_RSP_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_SUSPEND_RSP_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* API_CONNECT_REQ_EVT */    {AVDT_CCB_SET_RECONN,        AVDT_CCB_SET_CONN,          AVDT_CCB_CLOSING_ST},
+/* API_DISCONNECT_REQ_EVT */ {AVDT_CCB_CLR_RECONN,        AVDT_CCB_SET_DISCONN,       AVDT_CCB_CLOSING_ST},
+/* MSG_DISCOVER_CMD_EVT */   {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_GETCAP_CMD_EVT */     {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_START_CMD_EVT */      {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_SUSPEND_CMD_EVT */    {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_DISCOVER_RSP_EVT */   {AVDT_CCB_HDL_DISCOVER_RSP,  AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_GETCAP_RSP_EVT */     {AVDT_CCB_HDL_GETCAP_RSP,    AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_START_RSP_EVT */      {AVDT_CCB_HDL_START_RSP,     AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* MSG_SUSPEND_RSP_EVT */    {AVDT_CCB_HDL_SUSPEND_RSP,   AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* RCVRSP_EVT */             {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* SENDMSG_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* RET_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* RSP_TOUT_EVT */           {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* IDLE_TOUT_EVT */          {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* UL_OPEN_EVT */            {AVDT_CCB_SET_RECONN,        AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* UL_CLOSE_EVT */           {AVDT_CCB_CLR_RECONN,        AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* LL_OPEN_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST},
+/* LL_CLOSE_EVT */           {AVDT_CCB_CHK_RECONN,        AVDT_CCB_IGNORE,            AVDT_CCB_IDLE_ST},
+/* LL_CONG_EVT */            {AVDT_CCB_IGNORE,            AVDT_CCB_IGNORE,            AVDT_CCB_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tAVDT_CCB_ST_TBL)[AVDT_CCB_NUM_COLS];
+
+/* state table */
+const tAVDT_CCB_ST_TBL avdt_ccb_st_tbl[] = {
+    avdt_ccb_st_idle,
+    avdt_ccb_st_opening,
+    avdt_ccb_st_open,
+    avdt_ccb_st_closing
+};
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_init
+**
+** Description      Initialize channel control block module.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ccb_init(void)
+{
+    memset(&avdt_cb.ccb[0], 0, sizeof(tAVDT_CCB) * AVDT_NUM_LINKS);
+    avdt_cb.p_ccb_act = (tAVDT_CCB_ACTION *) avdt_ccb_action;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_event
+**
+** Description      State machine event handling function for ccb
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_ccb_event(tAVDT_CCB *p_ccb, UINT8 event, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_CCB_ST_TBL    state_table;
+    UINT8               action;
+    int                 i;
+
+#if AVDT_DEBUG == TRUE
+    AVDT_TRACE_EVENT3("CCB ccb=%d event=%s state=%s", avdt_ccb_to_idx(p_ccb), avdt_ccb_evt_str[event], avdt_ccb_st_str[p_ccb->state]);
+#endif
+    BTTRC_AVDT_CCB_EVENT(event, p_ccb->state);
+
+    /* look up the state table for the current state */
+    state_table = avdt_ccb_st_tbl[p_ccb->state];
+
+    /* set next state */
+    if (p_ccb->state != state_table[event][AVDT_CCB_NEXT_STATE])
+        BTTRC_AVDT_CCB_STATE(state_table[event][AVDT_CCB_NEXT_STATE]);
+    p_ccb->state = state_table[event][AVDT_CCB_NEXT_STATE];
+
+    /* execute action functions */
+    for (i = 0; i < AVDT_CCB_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != AVDT_CCB_IGNORE)
+        {
+            BTTRC_AVDT_CCB_ACTION(action);
+            (*avdt_cb.p_ccb_act[action])(p_ccb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_by_bd
+**
+** Description      This lookup function finds the ccb for a BD address.
+**
+**
+** Returns          pointer to the ccb, or NULL if none found.
+**
+*******************************************************************************/
+tAVDT_CCB *avdt_ccb_by_bd(BD_ADDR bd_addr)
+{
+    tAVDT_CCB   *p_ccb = &avdt_cb.ccb[0];
+    int         i;
+
+    for (i = 0; i < AVDT_NUM_LINKS; i++, p_ccb++)
+    {
+        /* if allocated ccb has matching ccb */
+        if (p_ccb->allocated && (!memcmp(p_ccb->peer_addr, bd_addr, BD_ADDR_LEN)))
+        {
+            break;
+        }
+    }
+
+    if (i == AVDT_NUM_LINKS)
+    {
+        /* if no ccb found */
+        p_ccb = NULL;
+
+        AVDT_TRACE_DEBUG6("No ccb for addr %02x-%02x-%02x-%02x-%02x-%02x",
+                          bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
+    }
+    return p_ccb;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_alloc
+**
+** Description      Allocate a channel control block.
+**
+**
+** Returns          pointer to the ccb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+tAVDT_CCB *avdt_ccb_alloc(BD_ADDR bd_addr)
+{
+    tAVDT_CCB   *p_ccb = &avdt_cb.ccb[0];
+    int         i;
+
+    for (i = 0; i < AVDT_NUM_LINKS; i++, p_ccb++)
+    {
+        if (!p_ccb->allocated)
+        {
+            p_ccb->allocated = TRUE;
+            memcpy(p_ccb->peer_addr, bd_addr, BD_ADDR_LEN);
+            GKI_init_q(&p_ccb->cmd_q);
+            GKI_init_q(&p_ccb->rsp_q);
+            p_ccb->timer_entry.param = (UINT32) p_ccb;
+            AVDT_TRACE_DEBUG1("avdt_ccb_alloc %d", i);
+            break;
+        }
+    }
+
+    if (i == AVDT_NUM_LINKS)
+    {
+        /* out of ccbs */
+        p_ccb = NULL;
+        AVDT_TRACE_WARNING0("Out of ccbs");
+    }
+    return p_ccb;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_dealloc
+**
+** Description      Deallocate a stream control block.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_dealloc(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    AVDT_TRACE_DEBUG1("avdt_ccb_dealloc %d", avdt_ccb_to_idx(p_ccb));
+    btu_stop_timer(&p_ccb->timer_entry);
+    memset(p_ccb, 0, sizeof(tAVDT_CCB));
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_to_idx
+**
+** Description      Given a pointer to an ccb, return its index.
+**
+**
+** Returns          Index of ccb.
+**
+*******************************************************************************/
+UINT8 avdt_ccb_to_idx(tAVDT_CCB *p_ccb)
+{
+    /* use array arithmetic to determine index */
+    return (UINT8) (p_ccb - avdt_cb.ccb);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_by_idx
+**
+** Description      Return ccb pointer based on ccb index.
+**
+**
+** Returns          pointer to the ccb, or NULL if none found.
+**
+*******************************************************************************/
+tAVDT_CCB *avdt_ccb_by_idx(UINT8 idx)
+{
+    tAVDT_CCB   *p_ccb;
+
+    /* verify index */
+    if (idx < AVDT_NUM_LINKS)
+    {
+        p_ccb = &avdt_cb.ccb[idx];
+    }
+    else
+    {
+        p_ccb = NULL;
+        AVDT_TRACE_WARNING1("No ccb for idx %d", idx);
+    }
+    return p_ccb;
+}
+
diff --git a/stack/avdt/avdt_ccb_act.c b/stack/avdt/avdt_ccb_act.c
new file mode 100644
index 0000000..5719be9
--- /dev/null
+++ b/stack/avdt/avdt_ccb_act.c
@@ -0,0 +1,1108 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the action functions associated with the channel
+ *  control block state machine.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "gki.h"
+#include "btu.h"
+#include "btm_api.h"
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_clear_ccb
+**
+** Description      This function clears out certain buffers, queues, and
+**                  other data elements of a ccb.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_ccb_clear_ccb(tAVDT_CCB *p_ccb)
+{
+    BT_HDR          *p_buf;
+
+    /* clear certain ccb variables */
+    p_ccb->cong = FALSE;
+    p_ccb->ret_count = 0;
+
+    /* free message being fragmented */
+    if (p_ccb->p_curr_msg != NULL)
+    {
+        GKI_freebuf(p_ccb->p_curr_msg);
+        p_ccb->p_curr_msg = NULL;
+    }
+
+    /* free message being reassembled */
+    if (p_ccb->p_rx_msg != NULL)
+    {
+        GKI_freebuf(p_ccb->p_rx_msg);
+        p_ccb->p_rx_msg = NULL;
+    }
+
+    /* clear out response queue */
+    while ((p_buf = (BT_HDR *) GKI_dequeue(&p_ccb->rsp_q)) != NULL)
+    {
+        GKI_freebuf(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_chan_open
+**
+** Description      This function calls avdt_ad_open_req() to
+**                  initiate a signaling channel connection.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_chan_open(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    BTM_SetOutService(p_ccb->peer_addr, BTM_SEC_SERVICE_AVDTP, AVDT_CHAN_SIG);
+    avdt_ad_open_req(AVDT_CHAN_SIG, p_ccb, NULL, AVDT_INT);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_chan_close
+**
+** Description      This function calls avdt_ad_close_req() to close a
+**                  signaling channel connection.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_chan_close(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* close the transport channel used by this CCB */
+    avdt_ad_close_req(AVDT_CHAN_SIG, p_ccb, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_chk_close
+**
+** Description      This function checks for active streams on this CCB.
+**                  If there are none, it starts an idle timer.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_chk_close(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    int         i;
+    tAVDT_SCB   *p_scb = &avdt_cb.scb[0];
+
+    /* see if there are any active scbs associated with this ccb */
+    for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++)
+    {
+        if ((p_scb->allocated) && (p_scb->p_ccb == p_ccb))
+        {
+            break;
+        }
+    }
+
+    /* if no active scbs start idle timer */
+    if (i == AVDT_NUM_SEPS)
+    {
+        btu_start_timer(&p_ccb->timer_entry, BTU_TTYPE_AVDT_CCB_IDLE, avdt_cb.rcb.idle_tout);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_discover_cmd
+**
+** Description      This function is called when a discover command is
+**                  received from the peer.  It gathers up the stream
+**                  information for all allocated streams and initiates
+**                  sending of a discover response.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_discover_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_SEP_INFO      sep_info[AVDT_NUM_SEPS];
+    tAVDT_SCB           *p_scb = &avdt_cb.scb[0];
+    int                 i;
+
+    p_data->msg.discover_rsp.p_sep_info = sep_info;
+    p_data->msg.discover_rsp.num_seps = 0;
+
+    /* for all allocated scbs */
+    for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++)
+    {
+        if (p_scb->allocated)
+        {
+            /* copy sep info */
+            sep_info[i].in_use = p_scb->in_use;
+            sep_info[i].seid = i + 1;
+            sep_info[i].media_type = p_scb->cs.media_type;
+            sep_info[i].tsep = p_scb->cs.tsep;
+
+            p_data->msg.discover_rsp.num_seps++;
+        }
+    }
+
+    /* send response */
+    avdt_ccb_event(p_ccb, AVDT_CCB_API_DISCOVER_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_discover_rsp
+**
+** Description      This function is called when a discover response or
+**                  reject is received from the peer.  It calls the application
+**                  callback function with the results.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_discover_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* we're done with procedure */
+    p_ccb->proc_busy = FALSE;
+
+    /* call app callback with results */
+    (*p_ccb->proc_cback)(0, p_ccb->peer_addr, AVDT_DISCOVER_CFM_EVT,
+                         (tAVDT_CTRL *)(&p_data->msg.discover_rsp));
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_getcap_cmd
+**
+** Description      This function is called when a get capabilities command
+**                  is received from the peer.  It retrieves the stream
+**                  configuration for the requested stream and initiates
+**                  sending of a get capabilities response.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_getcap_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_SCB       *p_scb;
+
+    /* look up scb for seid sent to us */
+    p_scb = avdt_scb_by_hdl(p_data->msg.single.seid);
+
+    p_data->msg.svccap.p_cfg = &p_scb->cs.cfg;
+
+    avdt_ccb_event(p_ccb, AVDT_CCB_API_GETCAP_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_getcap_rsp
+**
+** Description      This function is called with a get capabilities response
+**                  or reject is received from the peer.  It calls the
+**                  application callback function with the results.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_getcap_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* we're done with procedure */
+    p_ccb->proc_busy = FALSE;
+
+    /* call app callback with results */
+    (*p_ccb->proc_cback)(0, p_ccb->peer_addr, AVDT_GETCAP_CFM_EVT,
+                         (tAVDT_CTRL *)(&p_data->msg.svccap));
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_start_cmd
+**
+** Description      This function is called when a start command is received
+**                  from the peer.  It verifies that all requested streams
+**                  are in the proper state.  If so, it initiates sending of
+**                  a start response.  Otherwise it sends a start reject.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_start_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8   seid;
+    UINT8   err_code;
+
+    /* verify all streams in the right state */
+    if ((seid = avdt_scb_verify(p_ccb, AVDT_VERIFY_START, p_data->msg.multi.seid_list,
+                                p_data->msg.multi.num_seps, &err_code)) == 0)
+    {
+        /* we're ok, send response */
+        avdt_ccb_event(p_ccb, AVDT_CCB_API_START_RSP_EVT, p_data);
+    }
+    else
+    {
+        /* not ok, send reject */
+        p_data->msg.hdr.err_code = err_code;
+        p_data->msg.hdr.err_param = seid;
+        avdt_msg_send_rej(p_ccb, AVDT_SIG_START, &p_data->msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_start_rsp
+**
+** Description      This function is called when a start response or reject
+**                  is received from the peer.  Using the SEIDs stored in the
+**                  current command message, it sends a start response or start
+**                  reject event to each SCB associated with the command.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_start_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8       event;
+    int         i;
+    UINT8       *p;
+    tAVDT_SCB   *p_scb;
+
+    /* determine rsp or rej event */
+    event = (p_data->msg.hdr.err_code == 0) ?
+            AVDT_SCB_MSG_START_RSP_EVT : AVDT_SCB_MSG_START_REJ_EVT;
+
+    /* get to where seid's are stashed in current cmd */
+    p = (UINT8 *)(p_ccb->p_curr_cmd + 1);
+
+    /* little trick here; length of current command equals number of streams */
+    for (i = 0; i < p_ccb->p_curr_cmd->len; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p[i])) != NULL)
+        {
+            avdt_scb_event(p_scb, event, (tAVDT_SCB_EVT *) &p_data->msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_suspend_cmd
+**
+** Description      This function is called when a suspend command is received
+**                  from the peer.  It verifies that all requested streams are
+**                  in the proper state.  If so, it initiates sending of a
+**                  suspend response.  Otherwise it sends a suspend reject.
+
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_suspend_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8   seid;
+    UINT8   err_code;
+
+    /* verify all streams in the right state */
+    if ((seid = avdt_scb_verify(p_ccb, AVDT_VERIFY_SUSPEND, p_data->msg.multi.seid_list,
+                                p_data->msg.multi.num_seps, &err_code)) == 0)
+    {
+        /* we're ok, send response */
+        avdt_ccb_event(p_ccb, AVDT_CCB_API_SUSPEND_RSP_EVT, p_data);
+    }
+    else
+    {
+        /* not ok, send reject */
+        p_data->msg.hdr.err_code = err_code;
+        p_data->msg.hdr.err_param = seid;
+        avdt_msg_send_rej(p_ccb, AVDT_SIG_SUSPEND, &p_data->msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_hdl_suspend_rsp
+**
+** Description      This function is called when a suspend response or reject
+**                  is received from the peer.  Using the SEIDs stored in the
+**                  current command message, it sends a suspend response or
+**                  suspend reject event to each SCB associated with the command.
+**
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_hdl_suspend_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8       event;
+    int         i;
+    UINT8       *p;
+    tAVDT_SCB   *p_scb;
+
+    /* determine rsp or rej event */
+    event = (p_data->msg.hdr.err_code == 0) ?
+            AVDT_SCB_MSG_SUSPEND_RSP_EVT : AVDT_SCB_MSG_SUSPEND_REJ_EVT;
+
+    /* get to where seid's are stashed in current cmd */
+    p = (UINT8 *)(p_ccb->p_curr_cmd + 1);
+
+    /* little trick here; length of current command equals number of streams */
+    for (i = 0; i < p_ccb->p_curr_cmd->len; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p[i])) != NULL)
+        {
+            avdt_scb_event(p_scb, event, (tAVDT_SCB_EVT *) &p_data->msg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_discover_cmd
+**
+** Description      This function is called to send a discover command to the
+**                  peer.  It copies variables needed for the procedure from
+**                  the event to the CCB.  It marks the CCB as busy and then
+**                  sends a discover command.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_discover_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* store info in ccb struct */
+    p_ccb->p_proc_data = p_data->discover.p_sep_info;
+    p_ccb->proc_cback = p_data->discover.p_cback;
+    p_ccb->proc_param = p_data->discover.num_seps;
+
+    /* we're busy */
+    p_ccb->proc_busy = TRUE;
+
+    /* build and queue discover req */
+    avdt_msg_send_cmd(p_ccb, NULL, AVDT_SIG_DISCOVER, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_discover_rsp
+**
+** Description      This function is called to send a discover response to
+**                  the peer.  It takes the stream information passed in the
+**                  event and sends a discover response.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_discover_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* send response */
+    avdt_msg_send_rsp(p_ccb, AVDT_SIG_DISCOVER, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_getcap_cmd
+**
+** Description      This function is called to send a get capabilities command
+**                  to the peer.  It copies variables needed for the procedure
+**                  from the event to the CCB.  It marks the CCB as busy and
+**                  then sends a get capabilities command.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_getcap_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8 sig_id = AVDT_SIG_GETCAP;
+
+    /* store info in ccb struct */
+    p_ccb->p_proc_data = p_data->getcap.p_cfg;
+    p_ccb->proc_cback = p_data->getcap.p_cback;
+
+    /* we're busy */
+    p_ccb->proc_busy = TRUE;
+
+    /* build and queue discover req */
+    if (p_data->msg.hdr.sig_id == AVDT_SIG_GET_ALLCAP)
+        sig_id = AVDT_SIG_GET_ALLCAP;
+
+    avdt_msg_send_cmd(p_ccb, NULL, sig_id, (tAVDT_MSG *) &p_data->getcap.single);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_getcap_rsp
+**
+** Description      This function is called to send a get capabilities response
+**                  to the peer.  It takes the stream information passed in the
+**                  event and sends a get capabilities response.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_getcap_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8 sig_id = AVDT_SIG_GETCAP;
+
+    if (p_data->msg.hdr.sig_id == AVDT_SIG_GET_ALLCAP)
+        sig_id = AVDT_SIG_GET_ALLCAP;
+
+    /* send response */
+    avdt_msg_send_rsp(p_ccb, sig_id, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_start_cmd
+**
+** Description      This function is called to send a start command to the
+**                  peer.  It verifies that all requested streams are in the
+**                  proper state.  If so, it sends a start command.  Otherwise
+**                  send ourselves back a start reject.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_start_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    int             i;
+    tAVDT_SCB       *p_scb;
+    tAVDT_MSG       avdt_msg;
+    UINT8           seid_list[AVDT_NUM_SEPS];
+
+    /* make copy of our seid list */
+    memcpy(seid_list, p_data->msg.multi.seid_list, p_data->msg.multi.num_seps);
+
+    /* verify all streams in the right state */
+    if ((avdt_msg.hdr.err_param = avdt_scb_verify(p_ccb, AVDT_VERIFY_OPEN, p_data->msg.multi.seid_list,
+                                         p_data->msg.multi.num_seps, &avdt_msg.hdr.err_code)) == 0)
+    {
+        /* set peer seid list in messsage */
+        avdt_scb_peer_seid_list(&p_data->msg.multi);
+
+        /* send command */
+        avdt_msg_send_cmd(p_ccb, seid_list, AVDT_SIG_START, &p_data->msg);
+    }
+    else
+    {
+        /* failed; send ourselves a reject for each stream */
+        for (i = 0; i < p_data->msg.multi.num_seps; i++)
+        {
+            if ((p_scb = avdt_scb_by_hdl(seid_list[i])) != NULL)
+            {
+                avdt_scb_event(p_scb, AVDT_SCB_MSG_START_REJ_EVT, (tAVDT_SCB_EVT *) &avdt_msg.hdr);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_start_rsp
+**
+** Description      This function is called to send a start response to the
+**                  peer.  It takes the stream information passed in the event
+**                  and sends a start response.  Then it sends a start event
+**                  to the SCB for each stream.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_start_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_SCB *p_scb;
+    int i;
+
+    /* send response message */
+    avdt_msg_send_rsp(p_ccb, AVDT_SIG_START, &p_data->msg);
+
+    /* send start event to each scb */
+    for (i = 0; i < p_data->msg.multi.num_seps; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p_data->msg.multi.seid_list[i])) != NULL)
+        {
+            avdt_scb_event(p_scb, AVDT_SCB_MSG_START_CMD_EVT, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_suspend_cmd
+**
+** Description      This function is called to send a suspend command to the
+**                  peer.  It verifies that all requested streams are in the
+**                  proper state.  If so, it sends a suspend command.
+**                  Otherwise it calls the callback function for each requested
+**                  stream and sends a suspend confirmation with failure.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_suspend_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    int             i;
+    tAVDT_SCB       *p_scb;
+    tAVDT_MSG       avdt_msg;
+    UINT8           seid_list[AVDT_NUM_SEPS];
+
+    /* make copy of our seid list */
+    memcpy(seid_list, p_data->msg.multi.seid_list, p_data->msg.multi.num_seps);
+
+    /* verify all streams in the right state */
+    if ((avdt_msg.hdr.err_param = avdt_scb_verify(p_ccb, AVDT_VERIFY_STREAMING, p_data->msg.multi.seid_list,
+                                         p_data->msg.multi.num_seps, &avdt_msg.hdr.err_code)) == 0)
+    {
+        /* set peer seid list in messsage */
+        avdt_scb_peer_seid_list(&p_data->msg.multi);
+
+        /* send command */
+        avdt_msg_send_cmd(p_ccb, seid_list, AVDT_SIG_SUSPEND, &p_data->msg);
+    }
+    else
+    {
+        /* failed; send ourselves a reject for each stream */
+        for (i = 0; i < p_data->msg.multi.num_seps; i++)
+        {
+            if ((p_scb = avdt_scb_by_hdl(seid_list[i])) != NULL)
+            {
+                avdt_scb_event(p_scb, AVDT_SCB_MSG_SUSPEND_REJ_EVT, (tAVDT_SCB_EVT *) &avdt_msg.hdr);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_suspend_rsp
+**
+** Description      This function is called to send a suspend response to the
+**                  peer.  It takes the stream information passed in the event
+**                  and sends a suspend response.  Then it sends a suspend event
+**                  to the SCB for each stream.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_suspend_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_SCB *p_scb;
+    int i;
+
+    /* send response message */
+    avdt_msg_send_rsp(p_ccb, AVDT_SIG_SUSPEND, &p_data->msg);
+
+    /* send start event to each scb */
+    for (i = 0; i < p_data->msg.multi.num_seps; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p_data->msg.multi.seid_list[i])) != NULL)
+        {
+            avdt_scb_event(p_scb, AVDT_SCB_MSG_SUSPEND_CMD_EVT, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_clear_cmds
+**
+** Description      This function is called when the signaling channel is
+**                  closed to clean up any pending commands.  For each pending
+**                  command in the command queue, it frees the command and
+**                  calls the application callback function indicating failure.
+**                  Certain CCB variables are also initialized.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_clear_cmds(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    int             i;
+    tAVDT_SCB       *p_scb = &avdt_cb.scb[0];
+    UINT8           err_code = AVDT_ERR_CONNECT;
+
+    /* clear the ccb */
+    avdt_ccb_clear_ccb(p_ccb);
+
+    /* clear out command queue; this is a little tricky here; we need
+    ** to handle the case where there is a command on deck in p_curr_cmd,
+    ** plus we need to clear out the queue
+    */
+    do
+    {
+        /* we know p_curr_cmd = NULL after this */
+        avdt_ccb_cmd_fail(p_ccb, (tAVDT_CCB_EVT *) &err_code);
+
+        /* set up next message */
+        p_ccb->p_curr_cmd = (BT_HDR *) GKI_dequeue(&p_ccb->cmd_q);
+
+    } while (p_ccb->p_curr_cmd != NULL);
+
+    /* send a CC_CLOSE_EVT any active scbs associated with this ccb */
+    for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++)
+    {
+        if ((p_scb->allocated) && (p_scb->p_ccb == p_ccb))
+        {
+            avdt_scb_event(p_scb, AVDT_SCB_CC_CLOSE_EVT, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_cmd_fail
+**
+** Description      This function is called when there is a response timeout.
+**                  The currently pending command is freed and we fake a
+**                  reject message back to ourselves.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_cmd_fail(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_MSG       msg;
+    UINT8           evt;
+    tAVDT_SCB       *p_scb;
+
+    if (p_ccb->p_curr_cmd != NULL)
+    {
+        /* set up data */
+        msg.hdr.err_code = p_data->err_code;
+        msg.hdr.err_param = 0;
+        msg.hdr.ccb_idx = avdt_ccb_to_idx(p_ccb);
+
+        /* pretend that we received a rej message */
+        evt = avdt_msg_rej_2_evt[p_ccb->p_curr_cmd->event - 1];
+
+        if (evt & AVDT_CCB_MKR)
+        {
+            avdt_ccb_event(p_ccb, (UINT8) (evt & ~AVDT_CCB_MKR), (tAVDT_CCB_EVT *) &msg);
+        }
+        else
+        {
+            /* we get the scb out of the current cmd */
+            p_scb = avdt_scb_by_hdl(*((UINT8 *)(p_ccb->p_curr_cmd + 1)));
+            if (p_scb != NULL)
+            {
+                avdt_scb_event(p_scb, evt, (tAVDT_SCB_EVT *) &msg);
+            }
+        }
+
+        GKI_freebuf(p_ccb->p_curr_cmd);
+        p_ccb->p_curr_cmd = NULL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_free_cmd
+**
+** Description      This function is called when a response is received for a
+**                  currently pending command.  The command is freed.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_free_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    if (p_ccb->p_curr_cmd != NULL)
+    {
+        GKI_freebuf(p_ccb->p_curr_cmd);
+        p_ccb->p_curr_cmd = NULL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_cong_state
+**
+** Description      This function is called to set the congestion state for
+**                  the CCB.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_cong_state(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    p_ccb->cong = p_data->llcong;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_ret_cmd
+**
+** Description      This function is called to retransmit the currently
+**                  pending command.  The retransmission count is incremented.
+**                  If the count reaches the maximum number of retransmissions,
+**                  the event is treated as a response timeout.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_ret_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8   err_code = AVDT_ERR_TIMEOUT;
+    BT_HDR  *p_msg;
+
+    p_ccb->ret_count++;
+    if (p_ccb->ret_count == AVDT_RET_MAX)
+    {
+        /* command failed */
+        p_ccb->ret_count = 0;
+        avdt_ccb_cmd_fail(p_ccb, (tAVDT_CCB_EVT *) &err_code);
+
+        /* go to next queued command */
+        avdt_ccb_snd_cmd(p_ccb, p_data);
+    }
+    else
+    {
+        /* if command pending and we're not congested and not sending a fragment */
+        if ((!p_ccb->cong) && (p_ccb->p_curr_msg == NULL) && (p_ccb->p_curr_cmd != NULL))
+        {
+            /* make copy of message in p_curr_cmd and send it */
+            if ((p_msg = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID)) != NULL)
+            {
+                memcpy(p_msg, p_ccb->p_curr_cmd,
+                       (sizeof(BT_HDR) + p_ccb->p_curr_cmd->offset + p_ccb->p_curr_cmd->len));
+                avdt_msg_send(p_ccb, p_msg);
+            }
+        }
+
+        /* restart timer */
+        btu_start_timer(&p_ccb->timer_entry, BTU_TTYPE_AVDT_CCB_RET, avdt_cb.rcb.ret_tout);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_cmd
+**
+** Description      This function is called the send the next command,
+**                  if any, in the command queue.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    BT_HDR  *p_msg;
+
+    /* do we have commands to send?  send next command;  make sure we're clear;
+    ** not congested, not sending fragment, not waiting for response
+    */
+    if ((!p_ccb->cong) && (p_ccb->p_curr_msg == NULL) && (p_ccb->p_curr_cmd == NULL))
+    {
+        if ((p_msg = (BT_HDR *) GKI_dequeue(&p_ccb->cmd_q)) != NULL)
+        {
+            /* make a copy of buffer in p_curr_cmd */
+            if ((p_ccb->p_curr_cmd = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID)) != NULL)
+            {
+                memcpy(p_ccb->p_curr_cmd, p_msg, (sizeof(BT_HDR) + p_msg->offset + p_msg->len));
+
+                avdt_msg_send(p_ccb, p_msg);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_snd_msg
+**
+** Description
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_snd_msg(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    BT_HDR      *p_msg;
+
+    /* if not congested */
+    if (!p_ccb->cong)
+    {
+        /* are we sending a fragmented message? continue sending fragment */
+        if (p_ccb->p_curr_msg != NULL)
+        {
+            avdt_msg_send(p_ccb, NULL);
+        }
+        /* do we have responses to send?  send them */
+        else if (!GKI_queue_is_empty(&p_ccb->rsp_q))
+        {
+            while ((p_msg = (BT_HDR *) GKI_dequeue(&p_ccb->rsp_q)) != NULL)
+            {
+                if (avdt_msg_send(p_ccb, p_msg) == TRUE)
+                {
+                    /* break out if congested */
+                    break;
+                }
+            }
+        }
+
+        /* do we have commands to send?  send next command */
+        avdt_ccb_snd_cmd(p_ccb, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_set_reconn
+**
+** Description      This function is called to enable a reconnect attempt when
+**                  a channel transitions from closing to idle state.  It sets
+**                  the reconn variable to TRUE.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_set_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    p_ccb->reconn = TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_clr_reconn
+**
+** Description      This function is called to clear the reconn variable.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_clr_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    p_ccb->reconn = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_chk_reconn
+**
+** Description      This function is called to check if a reconnect attempt
+**                  is enabled.  If enabled, it sends an AVDT_CCB_UL_OPEN_EVT
+**                  to the CCB.  If disabled, the CCB is deallocated.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_chk_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    UINT8   err_code = AVDT_ERR_CONNECT;
+
+    if (p_ccb->reconn)
+    {
+        p_ccb->reconn = FALSE;
+
+        /* clear out ccb */
+        avdt_ccb_clear_ccb(p_ccb);
+
+        /* clear out current command, if any */
+        avdt_ccb_cmd_fail(p_ccb, (tAVDT_CCB_EVT *) &err_code);
+
+        /* reopen the signaling channel */
+        avdt_ccb_event(p_ccb, AVDT_CCB_UL_OPEN_EVT, NULL);
+    }
+    else
+    {
+        avdt_ccb_ll_closed(p_ccb, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_chk_timer
+**
+** Description      This function stops the CCB timer if the idle timer is
+**                  running.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_chk_timer(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    if (p_ccb->timer_entry.event == BTU_TTYPE_AVDT_CCB_IDLE)
+    {
+        btu_stop_timer(&p_ccb->timer_entry);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_set_conn
+**
+** Description      Set CCB variables associated with AVDT_ConnectReq().
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_set_conn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* save callback */
+    p_ccb->p_conn_cback = p_data->connect.p_cback;
+
+    /* set security level */
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_AVDTP, p_data->connect.sec_mask,
+                         AVDT_PSM, BTM_SEC_PROTO_AVDT, AVDT_CHAN_SIG);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_set_disconn
+**
+** Description      Set CCB variables associated with AVDT_DisconnectReq().
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_set_disconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /*
+    AVDT_TRACE_EVENT2("avdt_ccb_set_disconn:conn:x%x, api:x%x",
+        p_ccb->p_conn_cback, p_data->disconnect.p_cback);
+        */
+    /* save callback */
+    if (p_data->disconnect.p_cback)
+        p_ccb->p_conn_cback = p_data->disconnect.p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_do_disconn
+**
+** Description      Do action associated with AVDT_DisconnectReq().
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_do_disconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    /* clear any pending commands */
+    avdt_ccb_clear_cmds(p_ccb, NULL);
+
+    /* close channel */
+    avdt_ccb_chan_close(p_ccb, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_ll_closed
+**
+** Description      Clear commands from and deallocate CCB.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_ll_closed(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_CTRL_CBACK    *p_cback;
+    BD_ADDR             bd_addr;
+    tAVDT_CTRL          avdt_ctrl;
+
+    /* clear any pending commands */
+    avdt_ccb_clear_cmds(p_ccb, NULL);
+
+    /* save callback pointer, bd addr */
+    p_cback = p_ccb->p_conn_cback;
+    if (!p_cback)
+        p_cback = avdt_cb.p_conn_cback;
+    memcpy(bd_addr, p_ccb->peer_addr, BD_ADDR_LEN);
+
+    /* dealloc ccb */
+    avdt_ccb_dealloc(p_ccb, NULL);
+
+    /* call callback */
+    if (p_cback)
+    {
+        avdt_ctrl.hdr.err_code = 0;
+        (*p_cback)(0, bd_addr, AVDT_DISCONNECT_IND_EVT, &avdt_ctrl);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_ccb_ll_opened
+**
+** Description      Call callback on open.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_ccb_ll_opened(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data)
+{
+    tAVDT_CTRL          avdt_ctrl;
+
+    p_ccb->ll_opened = TRUE;
+
+    if (!p_ccb->p_conn_cback)
+        p_ccb->p_conn_cback = avdt_cb.p_conn_cback;
+
+    /* call callback */
+    if (p_ccb->p_conn_cback)
+    {
+        avdt_ctrl.hdr.err_code = 0;
+        avdt_ctrl.hdr.err_param = p_data->msg.hdr.err_param;
+        (*p_ccb->p_conn_cback)(0, p_ccb->peer_addr, AVDT_CONNECT_IND_EVT, &avdt_ctrl);
+    }
+}
diff --git a/stack/avdt/avdt_defs.h b/stack/avdt/avdt_defs.h
new file mode 100644
index 0000000..b6dbbc4
--- /dev/null
+++ b/stack/avdt/avdt_defs.h
@@ -0,0 +1,203 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This contains constants definitions and other information from the AVDTP
+ *  specification.  This file is intended for use internal to AVDT only.
+ *
+ ******************************************************************************/
+#ifndef AVDT_DEFS_H
+#define AVDT_DEFS_H
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* signalling packet type */
+#define AVDT_PKT_TYPE_SINGLE        0       /* single packet */
+#define AVDT_PKT_TYPE_START         1       /* start packet */
+#define AVDT_PKT_TYPE_CONT          2       /* continue packet */
+#define AVDT_PKT_TYPE_END           3       /* end packet */
+
+/* signalling message type */
+#define AVDT_MSG_TYPE_CMD           0       /* command */
+#define AVDT_MSG_TYPE_GRJ           1       /* general reject */
+#define AVDT_MSG_TYPE_RSP           2       /* response accept */
+#define AVDT_MSG_TYPE_REJ           3       /* response reject */
+
+/* signalling messages */
+#define AVDT_SIG_DISCOVER           1       /* discover */
+#define AVDT_SIG_GETCAP             2       /* get capabilities */
+#define AVDT_SIG_SETCONFIG          3       /* set configuration */
+#define AVDT_SIG_GETCONFIG          4       /* get configuration */
+#define AVDT_SIG_RECONFIG           5       /* reconfigure */
+#define AVDT_SIG_OPEN               6       /* open */
+#define AVDT_SIG_START              7       /* start */
+#define AVDT_SIG_CLOSE              8       /* close */
+#define AVDT_SIG_SUSPEND            9       /* suspend */
+#define AVDT_SIG_ABORT              10      /* abort */
+#define AVDT_SIG_SECURITY           11      /* security control */
+#define AVDT_SIG_GET_ALLCAP         12      /* get all capabilities */
+#define AVDT_SIG_DELAY_RPT          13      /* delay report */
+
+/* maximum signal value */
+#define AVDT_SIG_MAX                AVDT_SIG_DELAY_RPT
+
+/* used for general reject */
+#define AVDT_SIG_NONE               0
+
+/* some maximum and minimum sizes of signalling messages */
+#define AVDT_DISCOVER_REQ_MIN       1
+#define AVDT_DISCOVER_REQ_MAX       124
+
+/* service category information element field values */
+#define AVDT_CAT_TRANS              1       /* Media Transport */
+#define AVDT_CAT_REPORT             2       /* Reporting */
+#define AVDT_CAT_RECOV              3       /* Recovery */
+#define AVDT_CAT_PROTECT            4       /* Content Protection */
+#define AVDT_CAT_HDRCMP             5       /* Header Compression */
+#define AVDT_CAT_MUX                6       /* Multiplexing */
+#define AVDT_CAT_CODEC              7       /* Media Codec */
+#define AVDT_CAT_DELAY_RPT          8       /* Delay Reporting */
+#define AVDT_CAT_MAX_CUR            AVDT_CAT_DELAY_RPT
+
+/* min/max lengths of service category information elements */
+#define AVDT_LEN_TRANS_MIN          0
+#define AVDT_LEN_REPORT_MIN         0
+#define AVDT_LEN_RECOV_MIN          3
+#define AVDT_LEN_PROTECT_MIN        2
+#define AVDT_LEN_HDRCMP_MIN         1
+#define AVDT_LEN_MUX_MIN            3
+#define AVDT_LEN_CODEC_MIN          2
+#define AVDT_LEN_DELAY_RPT_MIN      0
+
+#define AVDT_LEN_TRANS_MAX          0
+#define AVDT_LEN_REPORT_MAX         0
+#define AVDT_LEN_RECOV_MAX          3
+#define AVDT_LEN_PROTECT_MAX        255
+#define AVDT_LEN_HDRCMP_MAX         1
+#define AVDT_LEN_MUX_MAX            7
+#define AVDT_LEN_CODEC_MAX          255
+#define AVDT_LEN_DELAY_RPT_MAX      0
+
+/* minimum possible size of configuration or capabilities data */
+#define AVDT_LEN_CFG_MIN            2
+
+/* minimum and maximum lengths for different message types */
+#define AVDT_LEN_SINGLE             1
+#define AVDT_LEN_SETCONFIG_MIN      2
+#define AVDT_LEN_RECONFIG_MIN       1
+#define AVDT_LEN_MULTI_MIN          1
+#define AVDT_LEN_SECURITY_MIN       1
+#define AVDT_LEN_DELAY_RPT          3
+
+/* header lengths for different packet types */
+#define AVDT_LEN_TYPE_SINGLE        2       /* single packet */
+#define AVDT_LEN_TYPE_START         3       /* start packet */
+#define AVDT_LEN_TYPE_CONT          1       /* continue packet */
+#define AVDT_LEN_TYPE_END           1       /* end packet */
+
+/* length of general reject message */
+#define AVDT_LEN_GEN_REJ            2
+
+/* recovery service capabilities information elements */
+#define AVDT_RECOV_MRWS_MIN         0x01    /* min value for maximum recovery window */
+#define AVDT_RECOV_MRWS_MAX         0x18    /* max value for maximum recovery window */
+#define AVDT_RECOV_MNMP_MIN         0x01    /* min value for maximum number of media packets */
+#define AVDT_RECOV_MNMP_MAX         0x18    /* max value for maximum number of media packets */
+
+/* SEID value range */
+#define AVDT_SEID_MIN               0x01
+#define AVDT_SEID_MAX               0x3E
+
+/* first byte of media packet header */
+#define AVDT_MEDIA_OCTET1           0x80
+
+/* for adaptation layer header */
+#define AVDT_ALH_LCODE_MASK     0x03    /* coding of length field */
+#define AVDT_ALH_LCODE_NONE     0x00    /* No length field present. Take length from l2cap */
+#define AVDT_ALH_LCODE_16BIT    0x01    /* 16bit length field */
+#define AVDT_ALH_LCODE_9BITM0   0x02    /* 9 bit length field, MSB = 0, 8 LSBs in 1 octet following */
+#define AVDT_ALH_LCODE_9BITM1   0x03    /* 9 bit length field, MSB = 1, 8 LSBs in 1 octet following */
+
+#define AVDT_ALH_FRAG_MASK      0x04    /* set this for continuation packet */
+
+/*****************************************************************************
+** message parsing and building macros
+*****************************************************************************/
+
+#define AVDT_MSG_PRS_HDR(p, lbl, pkt, msg) \
+    lbl = *(p) >> 4; \
+    pkt = (*(p) >> 2) & 0x03; \
+    msg = *(p)++ & 0x03;
+
+#define AVDT_MSG_PRS_DISC(p, seid, in_use, type, tsep) \
+    seid = *(p) >> 2; \
+    in_use = (*(p)++ >> 1) & 0x01; \
+    type = *(p) >> 4; \
+    tsep = (*(p)++ >> 3) & 0x01;
+
+#define AVDT_MSG_PRS_SIG(p, sig) \
+    sig = *(p)++ & 0x3F;
+
+#define AVDT_MSG_PRS_SEID(p, seid) \
+    seid = *(p)++ >> 2;
+
+#define AVDT_MSG_PRS_PKT_TYPE(p, pkt) \
+    pkt = (*(p) >> 2) & 0x03;
+
+#define AVDT_MSG_PRS_OCTET1(p, o_v, o_p, o_x, o_cc) \
+    o_v = *(p) >> 6; \
+    o_p = (*(p) >> 5) & 0x01; \
+    o_x = (*(p) >> 4) & 0x01; \
+    o_cc = *(p)++ & 0x0F;
+
+#define AVDT_MSG_PRS_RPT_OCTET1(p, o_v, o_p, o_cc) \
+    o_v = *(p) >> 6; \
+    o_p = (*(p) >> 5) & 0x01; \
+    o_cc = *(p)++ & 0x1F;
+
+#define AVDT_MSG_PRS_M_PT(p, m_pt, marker) \
+    marker = *(p) >> 7; \
+    m_pt = *(p)++ & 0x7F;
+
+#define AVDT_MSG_BLD_HDR(p, lbl, pkt, msg) \
+    *(p)++ = (UINT8) ((lbl) << 4) | ((pkt) << 2) | (msg);
+
+#define AVDT_MSG_BLD_DISC(p, seid, in_use, type, tsep) \
+    *(p)++ = (UINT8) (((seid) << 2) | ((in_use) << 1)); \
+    *(p)++ = (UINT8) (((type) << 4) | ((tsep) << 3));
+
+#define AVDT_MSG_BLD_SIG(p, sig) \
+    *(p)++ = (UINT8) (sig);
+
+#define AVDT_MSG_BLD_SEID(p, seid) \
+    *(p)++ = (UINT8) ((seid) << 2);
+
+#define AVDT_MSG_BLD_ERR(p, err) \
+    *(p)++ = (UINT8) (err);
+
+#define AVDT_MSG_BLD_PARAM(p, param) \
+    *(p)++ = (UINT8) (param);
+
+#define AVDT_MSG_BLD_NOSP(p, nosp) \
+    *(p)++ = (UINT8) (nosp);
+
+#endif /* AVDT_DEFS_H */
+
diff --git a/stack/avdt/avdt_int.h b/stack/avdt/avdt_int.h
new file mode 100644
index 0000000..9b101fc
--- /dev/null
+++ b/stack/avdt/avdt_int.h
@@ -0,0 +1,744 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains interfaces which are internal to AVDTP.
+ *
+ ******************************************************************************/
+#ifndef AVDT_INT_H
+#define AVDT_INT_H
+
+#include "gki.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_defs.h"
+#include "l2c_api.h"
+#include "btm_api.h"
+
+#ifndef AVDT_DEBUG
+#if (!defined BTTRC_INCLUDED || BTTRC_INCLUDED == FALSE)
+#define AVDT_DEBUG  TRUE
+#else
+#define AVDT_DEBUG  FALSE
+#endif
+#endif
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* channel types */
+enum {
+    AVDT_CHAN_SIG,                  /* signaling channel */
+    AVDT_CHAN_MEDIA,                /* media channel */
+#if AVDT_REPORTING == TRUE
+    AVDT_CHAN_REPORT,               /* reporting channel */
+#endif
+    AVDT_CHAN_NUM_TYPES
+};
+
+/* protocol service capabilities of this AVDTP implementation */
+/* for now multiplexing will be used only for fragmentation */
+#if ((AVDT_MULTIPLEXING == TRUE) && (AVDT_REPORTING == TRUE))
+#define AVDT_PSC                (AVDT_PSC_TRANS | AVDT_PSC_MUX | AVDT_PSC_REPORT | AVDT_PSC_DELAY_RPT)
+#define AVDT_LEG_PSC            (AVDT_PSC_TRANS | AVDT_PSC_MUX | AVDT_PSC_REPORT)
+#else /* AVDT_MULTIPLEXING && AVDT_REPORTING  */
+
+#if (AVDT_MULTIPLEXING == TRUE)
+#define AVDT_PSC                (AVDT_PSC_TRANS | AVDT_PSC_MUX | AVDT_PSC_DELAY_RPT)
+#define AVDT_LEG_PSC            (AVDT_PSC_TRANS | AVDT_PSC_MUX)
+#else /* AVDT_MULTIPLEXING */
+
+#if (AVDT_REPORTING == TRUE)
+#define AVDT_PSC                (AVDT_PSC_TRANS | AVDT_PSC_REPORT | AVDT_PSC_DELAY_RPT)
+#define AVDT_LEG_PSC            (AVDT_PSC_TRANS | AVDT_PSC_REPORT)
+#else /* AVDT_REPORTING  */
+#define AVDT_PSC                (AVDT_PSC_TRANS | AVDT_PSC_DELAY_RPT)
+#define AVDT_LEG_PSC            (AVDT_PSC_TRANS)
+#endif /* AVDT_REPORTING  */
+
+#endif /* AVDT_MULTIPLEXING */
+
+#endif /* AVDT_MULTIPLEXING && AVDT_REPORTING  */
+
+/* initiator/acceptor signaling roles */
+#define AVDT_CLOSE_ACP          0
+#define AVDT_CLOSE_INT          1
+#define AVDT_OPEN_ACP           2
+#define AVDT_OPEN_INT           3
+
+/* states for avdt_scb_verify */
+#define AVDT_VERIFY_OPEN        0
+#define AVDT_VERIFY_STREAMING   1
+#define AVDT_VERIFY_SUSPEND     2
+#define AVDT_VERIFY_START       3
+
+/* to distinguish CCB events from SCB events */
+#define AVDT_CCB_MKR            0x80
+
+/* offset where AVDTP signaling message header starts in message  */
+#define AVDT_HDR_OFFSET         (L2CAP_MIN_OFFSET + AVDT_NUM_SEPS)
+
+/* offset where AVDTP signaling message content starts;
+** use the size of a start header since it's the largest possible
+** layout of signaling message in a buffer is:
+**
+** |  BT_HDR  | SCB handles | L2CAP + HCI header | AVDTP header | data ... |
+**
+** Note that we "hide" the scb handles at the top of the message buffer.
+*/
+#define AVDT_MSG_OFFSET         (L2CAP_MIN_OFFSET + AVDT_NUM_SEPS + AVDT_LEN_TYPE_START)
+
+/* scb transport channel connect timeout value */
+#define AVDT_SCB_TC_CONN_TOUT   10
+
+/* scb transport channel disconnect timeout value */
+#define AVDT_SCB_TC_DISC_TOUT   10
+
+/* maximum number of command retransmissions */
+#ifndef AVDT_RET_MAX
+#define AVDT_RET_MAX            1
+#endif
+
+
+/* ccb state machine states */
+enum {
+    AVDT_CCB_IDLE_ST,
+    AVDT_CCB_OPENING_ST,
+    AVDT_CCB_OPEN_ST,
+    AVDT_CCB_CLOSING_ST
+};
+
+/* state machine action enumeration list */
+enum {
+    AVDT_CCB_CHAN_OPEN,
+    AVDT_CCB_CHAN_CLOSE,
+    AVDT_CCB_CHK_CLOSE,
+    AVDT_CCB_HDL_DISCOVER_CMD,
+    AVDT_CCB_HDL_DISCOVER_RSP,
+    AVDT_CCB_HDL_GETCAP_CMD,
+    AVDT_CCB_HDL_GETCAP_RSP,
+    AVDT_CCB_HDL_START_CMD,
+    AVDT_CCB_HDL_START_RSP,
+    AVDT_CCB_HDL_SUSPEND_CMD,
+    AVDT_CCB_HDL_SUSPEND_RSP,
+    AVDT_CCB_SND_DISCOVER_CMD,
+    AVDT_CCB_SND_DISCOVER_RSP,
+    AVDT_CCB_SND_GETCAP_CMD,
+    AVDT_CCB_SND_GETCAP_RSP,
+    AVDT_CCB_SND_START_CMD,
+    AVDT_CCB_SND_START_RSP,
+    AVDT_CCB_SND_SUSPEND_CMD,
+    AVDT_CCB_SND_SUSPEND_RSP,
+    AVDT_CCB_CLEAR_CMDS,
+    AVDT_CCB_CMD_FAIL,
+    AVDT_CCB_FREE_CMD,
+    AVDT_CCB_CONG_STATE,
+    AVDT_CCB_RET_CMD,
+    AVDT_CCB_SND_CMD,
+    AVDT_CCB_SND_MSG,
+    AVDT_CCB_SET_RECONN,
+    AVDT_CCB_CLR_RECONN,
+    AVDT_CCB_CHK_RECONN,
+    AVDT_CCB_CHK_TIMER,
+    AVDT_CCB_SET_CONN,
+    AVDT_CCB_SET_DISCONN,
+    AVDT_CCB_DO_DISCONN,
+    AVDT_CCB_LL_CLOSED,
+    AVDT_CCB_LL_OPENED,
+    AVDT_CCB_DEALLOC,
+    AVDT_CCB_NUM_ACTIONS
+};
+
+#define AVDT_CCB_IGNORE     AVDT_CCB_NUM_ACTIONS
+
+/* ccb state machine events */
+enum {
+    AVDT_CCB_API_DISCOVER_REQ_EVT,
+    AVDT_CCB_API_GETCAP_REQ_EVT,
+    AVDT_CCB_API_START_REQ_EVT,
+    AVDT_CCB_API_SUSPEND_REQ_EVT,
+    AVDT_CCB_API_DISCOVER_RSP_EVT,
+    AVDT_CCB_API_GETCAP_RSP_EVT,
+    AVDT_CCB_API_START_RSP_EVT,
+    AVDT_CCB_API_SUSPEND_RSP_EVT,
+    AVDT_CCB_API_CONNECT_REQ_EVT,
+    AVDT_CCB_API_DISCONNECT_REQ_EVT,
+    AVDT_CCB_MSG_DISCOVER_CMD_EVT,
+    AVDT_CCB_MSG_GETCAP_CMD_EVT,
+    AVDT_CCB_MSG_START_CMD_EVT,
+    AVDT_CCB_MSG_SUSPEND_CMD_EVT,
+    AVDT_CCB_MSG_DISCOVER_RSP_EVT,
+    AVDT_CCB_MSG_GETCAP_RSP_EVT,
+    AVDT_CCB_MSG_START_RSP_EVT,
+    AVDT_CCB_MSG_SUSPEND_RSP_EVT,
+    AVDT_CCB_RCVRSP_EVT,
+    AVDT_CCB_SENDMSG_EVT,
+    AVDT_CCB_RET_TOUT_EVT,
+    AVDT_CCB_RSP_TOUT_EVT,
+    AVDT_CCB_IDLE_TOUT_EVT,
+    AVDT_CCB_UL_OPEN_EVT,
+    AVDT_CCB_UL_CLOSE_EVT,
+    AVDT_CCB_LL_OPEN_EVT,
+    AVDT_CCB_LL_CLOSE_EVT,
+    AVDT_CCB_LL_CONG_EVT
+};
+
+
+/* scb state machine states; these state values are private to this module so
+** the scb state cannot be read or set by actions functions
+*/
+enum {
+    AVDT_SCB_IDLE_ST,
+    AVDT_SCB_CONF_ST,
+    AVDT_SCB_OPENING_ST,
+    AVDT_SCB_OPEN_ST,
+    AVDT_SCB_STREAM_ST,
+    AVDT_SCB_CLOSING_ST
+};
+
+/* state machine action enumeration list */
+enum {
+    AVDT_SCB_HDL_ABORT_CMD,
+    AVDT_SCB_HDL_ABORT_RSP,
+    AVDT_SCB_HDL_CLOSE_CMD,
+    AVDT_SCB_HDL_CLOSE_RSP,
+    AVDT_SCB_HDL_GETCONFIG_CMD,
+    AVDT_SCB_HDL_GETCONFIG_RSP,
+    AVDT_SCB_HDL_OPEN_CMD,
+    AVDT_SCB_HDL_OPEN_REJ,
+    AVDT_SCB_HDL_OPEN_RSP,
+    AVDT_SCB_HDL_PKT,
+    AVDT_SCB_DROP_PKT,
+    AVDT_SCB_HDL_RECONFIG_CMD,
+    AVDT_SCB_HDL_RECONFIG_RSP,
+    AVDT_SCB_HDL_SECURITY_CMD,
+    AVDT_SCB_HDL_SECURITY_RSP,
+    AVDT_SCB_HDL_SETCONFIG_CMD,
+    AVDT_SCB_HDL_SETCONFIG_REJ,
+    AVDT_SCB_HDL_SETCONFIG_RSP,
+    AVDT_SCB_HDL_START_CMD,
+    AVDT_SCB_HDL_START_RSP,
+    AVDT_SCB_HDL_SUSPEND_CMD,
+    AVDT_SCB_HDL_SUSPEND_RSP,
+    AVDT_SCB_HDL_TC_CLOSE,
+#if AVDT_REPORTING == TRUE
+    AVDT_SCB_HDL_TC_CLOSE_STO,
+#endif
+    AVDT_SCB_HDL_TC_OPEN,
+#if AVDT_REPORTING == TRUE
+    AVDT_SCB_HDL_TC_OPEN_STO,
+#endif
+    AVDT_SCB_SND_DELAY_RPT_REQ,
+    AVDT_SCB_HDL_DELAY_RPT_CMD,
+    AVDT_SCB_HDL_DELAY_RPT_RSP,
+    AVDT_SCB_HDL_WRITE_REQ,
+    AVDT_SCB_SND_ABORT_REQ,
+    AVDT_SCB_SND_ABORT_RSP,
+    AVDT_SCB_SND_CLOSE_REQ,
+    AVDT_SCB_SND_STREAM_CLOSE,
+    AVDT_SCB_SND_CLOSE_RSP,
+    AVDT_SCB_SND_GETCONFIG_REQ,
+    AVDT_SCB_SND_GETCONFIG_RSP,
+    AVDT_SCB_SND_OPEN_REQ,
+    AVDT_SCB_SND_OPEN_RSP,
+    AVDT_SCB_SND_RECONFIG_REQ,
+    AVDT_SCB_SND_RECONFIG_RSP,
+    AVDT_SCB_SND_SECURITY_REQ,
+    AVDT_SCB_SND_SECURITY_RSP,
+    AVDT_SCB_SND_SETCONFIG_REQ,
+    AVDT_SCB_SND_SETCONFIG_REJ,
+    AVDT_SCB_SND_SETCONFIG_RSP,
+    AVDT_SCB_SND_TC_CLOSE,
+    AVDT_SCB_CB_ERR,
+    AVDT_SCB_CONG_STATE,
+    AVDT_SCB_REJ_STATE,
+    AVDT_SCB_REJ_IN_USE,
+    AVDT_SCB_REJ_NOT_IN_USE,
+    AVDT_SCB_SET_REMOVE,
+    AVDT_SCB_FREE_PKT,
+    AVDT_SCB_CLR_PKT,
+    AVDT_SCB_CHK_SND_PKT,
+    AVDT_SCB_TC_TIMER,
+    AVDT_SCB_CLR_VARS,
+    AVDT_SCB_DEALLOC,
+    AVDT_SCB_NUM_ACTIONS
+};
+
+#define AVDT_SCB_IGNORE     AVDT_SCB_NUM_ACTIONS
+
+/* scb state machine events */
+enum {
+    AVDT_SCB_API_REMOVE_EVT,
+    AVDT_SCB_API_WRITE_REQ_EVT,
+    AVDT_SCB_API_GETCONFIG_REQ_EVT,
+    AVDT_SCB_API_DELAY_RPT_REQ_EVT,
+    AVDT_SCB_API_SETCONFIG_REQ_EVT,
+    AVDT_SCB_API_OPEN_REQ_EVT,
+    AVDT_SCB_API_CLOSE_REQ_EVT,
+    AVDT_SCB_API_RECONFIG_REQ_EVT,
+    AVDT_SCB_API_SECURITY_REQ_EVT,
+    AVDT_SCB_API_ABORT_REQ_EVT,
+    AVDT_SCB_API_GETCONFIG_RSP_EVT,
+    AVDT_SCB_API_SETCONFIG_RSP_EVT,
+    AVDT_SCB_API_SETCONFIG_REJ_EVT,
+    AVDT_SCB_API_OPEN_RSP_EVT,
+    AVDT_SCB_API_CLOSE_RSP_EVT,
+    AVDT_SCB_API_RECONFIG_RSP_EVT,
+    AVDT_SCB_API_SECURITY_RSP_EVT,
+    AVDT_SCB_API_ABORT_RSP_EVT,
+    AVDT_SCB_MSG_SETCONFIG_CMD_EVT,
+    AVDT_SCB_MSG_GETCONFIG_CMD_EVT,
+    AVDT_SCB_MSG_OPEN_CMD_EVT,
+    AVDT_SCB_MSG_START_CMD_EVT,
+    AVDT_SCB_MSG_SUSPEND_CMD_EVT,
+    AVDT_SCB_MSG_CLOSE_CMD_EVT,
+    AVDT_SCB_MSG_ABORT_CMD_EVT,
+    AVDT_SCB_MSG_RECONFIG_CMD_EVT,
+    AVDT_SCB_MSG_SECURITY_CMD_EVT,
+    AVDT_SCB_MSG_DELAY_RPT_CMD_EVT,
+    AVDT_SCB_MSG_DELAY_RPT_RSP_EVT,
+    AVDT_SCB_MSG_SETCONFIG_RSP_EVT,
+    AVDT_SCB_MSG_GETCONFIG_RSP_EVT,
+    AVDT_SCB_MSG_OPEN_RSP_EVT,
+    AVDT_SCB_MSG_START_RSP_EVT,
+    AVDT_SCB_MSG_SUSPEND_RSP_EVT,
+    AVDT_SCB_MSG_CLOSE_RSP_EVT,
+    AVDT_SCB_MSG_ABORT_RSP_EVT,
+    AVDT_SCB_MSG_RECONFIG_RSP_EVT,
+    AVDT_SCB_MSG_SECURITY_RSP_EVT,
+    AVDT_SCB_MSG_SETCONFIG_REJ_EVT,
+    AVDT_SCB_MSG_OPEN_REJ_EVT,
+    AVDT_SCB_MSG_START_REJ_EVT,
+    AVDT_SCB_MSG_SUSPEND_REJ_EVT,
+    AVDT_SCB_TC_TOUT_EVT,
+    AVDT_SCB_TC_OPEN_EVT,
+    AVDT_SCB_TC_CLOSE_EVT,
+    AVDT_SCB_TC_CONG_EVT,
+    AVDT_SCB_TC_DATA_EVT,
+    AVDT_SCB_CC_CLOSE_EVT
+};
+
+/* adaption layer number of stream routing table entries */
+#if AVDT_REPORTING == TRUE
+/* 2 channels(1 media, 1 report) for each SEP and one for signalling */
+#define AVDT_NUM_RT_TBL     ((AVDT_NUM_SEPS<<1) + 1)
+#else
+#define AVDT_NUM_RT_TBL     (AVDT_NUM_SEPS + 1)
+#endif
+
+/* adaption layer number of transport channel table entries - moved to target.h
+#define AVDT_NUM_TC_TBL     (AVDT_NUM_SEPS + AVDT_NUM_LINKS) */
+
+/* "states" used in transport channel table */
+#define AVDT_AD_ST_UNUSED   0       /* Unused - unallocated */
+#define AVDT_AD_ST_IDLE     1       /* No connection */
+#define AVDT_AD_ST_ACP      2       /* Waiting to accept a connection */
+#define AVDT_AD_ST_INT      3       /* Initiating a connection */
+#define AVDT_AD_ST_CONN     4       /* Waiting for connection confirm */
+#define AVDT_AD_ST_CFG      5       /* Waiting for configuration complete */
+#define AVDT_AD_ST_OPEN     6       /* Channel opened */
+#define AVDT_AD_ST_SEC_INT  7       /* Security process as INT */
+#define AVDT_AD_ST_SEC_ACP  8       /* Security process as ACP */
+
+/* Configuration flags. tAVDT_TC_TBL.cfg_flags */
+#define AVDT_L2C_CFG_IND_DONE   (1<<0)
+#define AVDT_L2C_CFG_CFM_DONE   (1<<1)
+#define AVDT_L2C_CFG_CONN_INT   (1<<2)
+#define AVDT_L2C_CFG_CONN_ACP   (1<<3)
+
+
+/* result code for avdt_ad_write_req() (L2CA_DataWrite()) */
+#define AVDT_AD_FAILED       L2CAP_DW_FAILED        /* FALSE */
+#define AVDT_AD_SUCCESS      L2CAP_DW_SUCCESS       /* TRUE */
+#define AVDT_AD_CONGESTED    L2CAP_DW_CONGESTED     /* 2 */
+
+/*****************************************************************************
+** data types
+*****************************************************************************/
+
+/* msg union of all message parameter types */
+typedef union {
+    tAVDT_EVT_HDR           hdr;
+    tAVDT_EVT_HDR           single;
+    tAVDT_SETCONFIG         config_cmd;
+    tAVDT_CONFIG            reconfig_cmd;
+    tAVDT_MULTI             multi;
+    tAVDT_SECURITY          security_cmd;
+    tAVDT_DISCOVER          discover_rsp;
+    tAVDT_CONFIG            svccap;
+    tAVDT_SECURITY          security_rsp;
+    tAVDT_DELAY_RPT         delay_rpt_cmd;
+} tAVDT_MSG;
+
+/* data type for AVDT_CCB_API_DISCOVER_REQ_EVT */
+typedef struct {
+    tAVDT_CTRL_CBACK    *p_cback;
+    tAVDT_SEP_INFO      *p_sep_info;
+    UINT8               num_seps;
+} tAVDT_CCB_API_DISCOVER;
+
+/* data type for AVDT_CCB_API_GETCAP_REQ_EVT */
+typedef struct {
+    tAVDT_EVT_HDR       single;
+    tAVDT_CTRL_CBACK    *p_cback;
+    tAVDT_CFG           *p_cfg;
+} tAVDT_CCB_API_GETCAP;
+
+/* data type for AVDT_CCB_API_CONNECT_REQ_EVT */
+typedef struct {
+    tAVDT_CTRL_CBACK    *p_cback;
+    UINT8               sec_mask;
+} tAVDT_CCB_API_CONNECT;
+
+/* data type for AVDT_CCB_API_DISCONNECT_REQ_EVT */
+typedef struct {
+    tAVDT_CTRL_CBACK    *p_cback;
+} tAVDT_CCB_API_DISCONNECT;
+
+/* union associated with ccb state machine events */
+typedef union {
+    tAVDT_CCB_API_DISCOVER      discover;
+    tAVDT_CCB_API_GETCAP        getcap;
+    tAVDT_CCB_API_CONNECT       connect;
+    tAVDT_CCB_API_DISCONNECT    disconnect;
+    tAVDT_MSG                   msg;
+    BOOLEAN                     llcong;
+    UINT8                       err_code;
+} tAVDT_CCB_EVT;
+
+/* channel control block type */
+typedef struct {
+    BD_ADDR             peer_addr;      /* BD address of peer */
+    TIMER_LIST_ENT      timer_entry;    /* CCB timer list entry */
+    BUFFER_Q            cmd_q;          /* Queue for outgoing command messages */
+    BUFFER_Q            rsp_q;          /* Queue for outgoing response and reject messages */
+    tAVDT_CTRL_CBACK    *proc_cback;    /* Procedure callback function */
+    tAVDT_CTRL_CBACK    *p_conn_cback;  /* Connection/disconnection callback function */
+    void                *p_proc_data;   /* Pointer to data storage for procedure */
+    BT_HDR              *p_curr_cmd;    /* Current command being sent awaiting response */
+    BT_HDR              *p_curr_msg;    /* Current message being sent */
+    BT_HDR              *p_rx_msg;      /* Current message being received */
+    BOOLEAN             allocated;      /* Whether ccb is allocated */
+    UINT8               state;          /* The CCB state machine state */
+    BOOLEAN             ll_opened;      /* TRUE if LL is opened */
+    BOOLEAN             proc_busy;      /* TRUE when a discover or get capabilities procedure in progress */
+    UINT8               proc_param;     /* Procedure parameter; either SEID for get capabilities or number of SEPS for discover */
+    BOOLEAN             cong;           /* Whether signaling channel is congested */
+    UINT8               label;          /* Message header "label" (sequence number) */
+    BOOLEAN             reconn;         /* If TRUE, reinitiate connection after transitioning from CLOSING to IDLE state */
+    UINT8               ret_count;      /* Command retransmission count */
+} tAVDT_CCB;
+
+/* type for action functions */
+typedef void (*tAVDT_CCB_ACTION)(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+
+/* type for AVDT_SCB_API_WRITE_REQ_EVT */
+typedef struct {
+    BT_HDR      *p_buf;
+    UINT32      time_stamp;
+#if AVDT_MULTIPLEXING == TRUE
+    BUFFER_Q    frag_q;          /* Queue for outgoing media fragments. p_buf should be 0 */
+    UINT8       *p_data;
+    UINT32      data_len;
+#endif
+    UINT8       m_pt;
+} tAVDT_SCB_APIWRITE;
+
+/* type for AVDT_SCB_TC_CLOSE_EVT */
+typedef struct {
+    UINT8           old_tc_state;       /* channel state before closed */
+    UINT8           tcid;               /* TCID  */
+    UINT8           type;               /* channel type */
+} tAVDT_SCB_TC_CLOSE;
+
+/* type for scb event data */
+typedef union {
+    tAVDT_MSG           msg;
+    tAVDT_SCB_APIWRITE  apiwrite;
+    tAVDT_DELAY_RPT     apidelay;
+    tAVDT_OPEN          open;
+    tAVDT_SCB_TC_CLOSE  close;
+    BOOLEAN             llcong;
+    BT_HDR              *p_pkt;
+} tAVDT_SCB_EVT;
+
+/* stream control block type */
+typedef struct {
+    tAVDT_CS        cs;             /* stream creation struct */
+    tAVDT_CFG       curr_cfg;       /* current configuration */
+    tAVDT_CFG       req_cfg;        /* requested configuration */
+    TIMER_LIST_ENT  timer_entry;    /* timer entry */
+    BT_HDR          *p_pkt;         /* packet waiting to be sent */
+    tAVDT_CCB       *p_ccb;         /* ccb associated with this scb */
+    UINT16          media_seq;      /* media packet sequence number */
+    BOOLEAN         allocated;      /* whether scb is allocated or unused */
+    BOOLEAN         in_use;         /* whether stream being used by peer */
+    UINT8           role;           /* initiator/acceptor role in current procedure */
+    BOOLEAN         remove;         /* whether CB is marked for removal */
+    UINT8           state;          /* state machine state */
+    UINT8           peer_seid;      /* SEID of peer stream */
+    UINT8           curr_evt;       /* current event; set only by state machine */
+    BOOLEAN         cong;           /* Whether media transport channel is congested */
+    UINT8           close_code;     /* Error code received in close response */
+#if AVDT_MULTIPLEXING == TRUE
+    BUFFER_Q        frag_q;         /* Queue for outgoing media fragments */
+    UINT32          frag_off;       /* length of already received media fragments */
+    UINT32          frag_org_len;   /* original length before fragmentation of receiving media packet */
+    UINT8           *p_next_frag;   /* next fragment to send */
+    UINT8           *p_media_buf;   /* buffer for media packet assigned by AVDT_SetMediaBuf */
+    UINT32          media_buf_len;  /* length of buffer for media packet assigned by AVDT_SetMediaBuf */
+#endif
+} tAVDT_SCB;
+
+/* type for action functions */
+typedef void (*tAVDT_SCB_ACTION)(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+
+/* adaption layer type for transport channel table */
+typedef struct {
+    UINT16  peer_mtu;       /* L2CAP mtu of the peer device */
+    UINT16  my_mtu;         /* Our MTU for this channel */
+    UINT16  my_flush_to;    /* Our flush timeout for this channel */
+    UINT16  lcid;
+    UINT8   tcid;           /* transport channel id */
+    UINT8   ccb_idx;        /* channel control block associated with this tc */
+    UINT8   state;          /* transport channel state */
+    UINT8   cfg_flags;      /* L2CAP configuration flags */
+    UINT8   id;
+} tAVDT_TC_TBL;
+
+/* adaption layer type for stream routing table */
+typedef struct {
+    UINT16  lcid;           /* L2CAP LCID of the associated transport channel */
+    UINT8   scb_hdl;        /* stream control block associated with this tc */
+} tAVDT_RT_TBL;
+
+
+/* adaption layer control block */
+typedef struct {
+    tAVDT_RT_TBL    rt_tbl[AVDT_NUM_LINKS][AVDT_NUM_RT_TBL];
+    tAVDT_TC_TBL    tc_tbl[AVDT_NUM_TC_TBL];
+    UINT8           lcid_tbl[MAX_L2CAP_CHANNELS];   /* map LCID to tc_tbl index */
+} tAVDT_AD;
+
+/* Control block for AVDT */
+typedef struct {
+    tAVDT_REG           rcb;                    /* registration control block */
+    tAVDT_CCB           ccb[AVDT_NUM_LINKS];    /* channel control blocks */
+    tAVDT_SCB           scb[AVDT_NUM_SEPS];     /* stream control blocks */
+    tAVDT_AD            ad;                     /* adaption layer control block */
+    tAVDTC_CTRL_CBACK   *p_conf_cback;          /* conformance callback function */
+    tAVDT_CCB_ACTION    *p_ccb_act;             /* pointer to CCB action functions */
+    tAVDT_SCB_ACTION    *p_scb_act;             /* pointer to SCB action functions */
+    tAVDT_CTRL_CBACK    *p_conn_cback;          /* connection callback function */
+    UINT8               trace_level;            /* trace level */
+} tAVDT_CB;
+
+
+/*****************************************************************************
+** function declarations
+*****************************************************************************/
+
+/* CCB function declarations */
+extern void avdt_ccb_init(void);
+extern void avdt_ccb_event(tAVDT_CCB *p_ccb, UINT8 event, tAVDT_CCB_EVT *p_data);
+extern tAVDT_CCB *avdt_ccb_by_bd(BD_ADDR bd_addr);
+extern tAVDT_CCB *avdt_ccb_alloc(BD_ADDR bd_addr);
+extern void avdt_ccb_dealloc(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern UINT8 avdt_ccb_to_idx(tAVDT_CCB *p_ccb);
+extern tAVDT_CCB *avdt_ccb_by_idx(UINT8 idx);
+
+/* CCB action functions */
+extern void avdt_ccb_chan_open(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_chan_close(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_chk_close(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_discover_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_discover_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_getcap_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_getcap_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_start_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_start_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_suspend_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_hdl_suspend_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_discover_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_discover_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_getcap_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_getcap_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_start_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_start_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_suspend_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_suspend_rsp(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_clear_cmds(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_cmd_fail(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_free_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_cong_state(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_ret_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_cmd(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_snd_msg(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_set_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_clr_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_chk_reconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_chk_timer(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_set_conn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_set_disconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_do_disconn(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_ll_closed(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+extern void avdt_ccb_ll_opened(tAVDT_CCB *p_ccb, tAVDT_CCB_EVT *p_data);
+
+/* SCB function prototypes */
+extern void avdt_scb_event(tAVDT_SCB *p_scb, UINT8 event, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_init(void);
+extern tAVDT_SCB *avdt_scb_alloc(tAVDT_CS *p_cs);
+extern void avdt_scb_dealloc(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern UINT8 avdt_scb_to_hdl(tAVDT_SCB *p_scb);
+extern tAVDT_SCB *avdt_scb_by_hdl(UINT8 hdl);
+extern UINT8 avdt_scb_verify(tAVDT_CCB *p_ccb, UINT8 state, UINT8 *p_seid, UINT16 num_seid, UINT8 *p_err_code);
+extern void avdt_scb_peer_seid_list(tAVDT_MULTI *p_multi);
+extern UINT32 avdt_scb_gen_ssrc(tAVDT_SCB *p_scb);
+
+/* SCB action functions */
+extern void avdt_scb_hdl_abort_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_abort_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_close_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_close_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_getconfig_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_getconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_open_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_open_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_open_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_drop_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_reconfig_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_reconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_security_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_security_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_setconfig_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_setconfig_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_setconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_start_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_start_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_suspend_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_suspend_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_delay_rpt_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_delay_rpt_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_delay_rpt_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_tc_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_tc_open(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_tc_close_sto(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_tc_open_sto(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_hdl_write_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_abort_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_abort_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_close_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_stream_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_close_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_getconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_getconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_open_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_open_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_reconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_reconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_security_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_security_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_setconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_setconfig_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_setconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_snd_tc_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_cb_err(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_cong_state(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_rej_state(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_rej_in_use(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_rej_not_in_use(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_set_remove(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_free_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_chk_snd_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_clr_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_tc_timer(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_clr_vars(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data);
+extern void avdt_scb_queue_frags(tAVDT_SCB *p_scb, UINT8 **pp_data, UINT32 *p_data_len, BUFFER_Q *pq);
+
+/* msg function declarations */
+extern BOOLEAN avdt_msg_send(tAVDT_CCB *p_ccb, BT_HDR *p_msg);
+extern void avdt_msg_send_cmd(tAVDT_CCB *p_ccb, void *p_scb, UINT8 sig_id, tAVDT_MSG *p_params);
+extern void avdt_msg_send_rsp(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params);
+extern void avdt_msg_send_rej(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params);
+extern void avdt_msg_send_grej(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params);
+extern void avdt_msg_ind(tAVDT_CCB *p_ccb, BT_HDR *p_buf);
+
+/* adaption layer function declarations */
+extern void avdt_ad_init(void);
+extern UINT8 avdt_ad_type_to_tcid(UINT8 type, tAVDT_SCB *p_scb);
+extern tAVDT_TC_TBL *avdt_ad_tc_tbl_by_st(UINT8 type, tAVDT_CCB *p_ccb, UINT8 state);
+extern tAVDT_TC_TBL *avdt_ad_tc_tbl_by_lcid(UINT16 lcid);
+extern tAVDT_TC_TBL *avdt_ad_tc_tbl_alloc(tAVDT_CCB *p_ccb);
+extern UINT8 avdt_ad_tc_tbl_to_idx(tAVDT_TC_TBL *p_tbl);
+extern void avdt_ad_tc_close_ind(tAVDT_TC_TBL *p_tbl, UINT16 reason);
+extern void avdt_ad_tc_open_ind(tAVDT_TC_TBL *p_tbl);
+extern void avdt_ad_tc_cong_ind(tAVDT_TC_TBL *p_tbl, BOOLEAN is_congested);
+extern void avdt_ad_tc_data_ind(tAVDT_TC_TBL *p_tbl, BT_HDR *p_buf);
+extern tAVDT_TC_TBL *avdt_ad_tc_tbl_by_type(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb);
+extern UINT8 avdt_ad_write_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb, BT_HDR *p_buf);
+extern void avdt_ad_open_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb, UINT8 role);
+extern void avdt_ad_close_req(UINT8 type, tAVDT_CCB *p_ccb, tAVDT_SCB *p_scb);
+
+extern void avdt_process_timeout(TIMER_LIST_ENT *p_tle);
+
+/*****************************************************************************
+** macros
+*****************************************************************************/
+
+/* we store the scb and the label in the layer_specific field of the
+** current cmd
+*/
+#define AVDT_BLD_LAYERSPEC(ls, msg, label) \
+            ls = (((label) << 4) | (msg))
+
+#define AVDT_LAYERSPEC_LABEL(ls)    ((UINT8)((ls) >> 4))
+
+#define AVDT_LAYERSPEC_MSG(ls)      ((UINT8)((ls) & 0x000F))
+
+/*****************************************************************************
+** global data
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+#if AVDT_DYNAMIC_MEMORY == FALSE
+AVDT_API extern tAVDT_CB  avdt_cb;
+#else
+AVDT_API extern tAVDT_CB *avdt_cb_ptr;
+#define avdt_cb (*avdt_cb_ptr)
+#endif
+
+
+/* L2CAP callback registration structure */
+extern const tL2CAP_APPL_INFO avdt_l2c_appl;
+
+/* reject message event lookup table */
+extern const UINT8 avdt_msg_rej_2_evt[];
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* AVDT_INT_H */
diff --git a/stack/avdt/avdt_l2c.c b/stack/avdt/avdt_l2c.c
new file mode 100644
index 0000000..20979b4
--- /dev/null
+++ b/stack/avdt/avdt_l2c.c
@@ -0,0 +1,521 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This AVDTP adaption layer module interfaces to L2CAP
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+
+/* callback function declarations */
+void avdt_l2c_connect_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+void avdt_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result);
+void avdt_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void avdt_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void avdt_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed);
+void avdt_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result);
+void avdt_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested);
+void avdt_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf);
+
+/* L2CAP callback function structure */
+const tL2CAP_APPL_INFO avdt_l2c_appl = {
+    avdt_l2c_connect_ind_cback,
+    avdt_l2c_connect_cfm_cback,
+    NULL,
+    avdt_l2c_config_ind_cback,
+    avdt_l2c_config_cfm_cback,
+    avdt_l2c_disconnect_ind_cback,
+    avdt_l2c_disconnect_cfm_cback,
+    NULL,
+    avdt_l2c_data_ind_cback,
+    avdt_l2c_congestion_ind_cback,
+    NULL                /* tL2CA_TX_COMPLETE_CB */
+};
+
+/*******************************************************************************
+**
+** Function         avdt_sec_check_complete_term
+**
+** Description      The function called when Security Manager finishes
+**                  verification of the service side connection
+**
+** Returns          void
+**
+*******************************************************************************/
+static void avdt_sec_check_complete_term (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    tL2CAP_CFG_INFO cfg;
+    tAVDT_TC_TBL    *p_tbl;
+
+    AVDT_TRACE_DEBUG1("avdt_sec_check_complete_term res: %d", res);
+    if (!bd_addr)
+    {
+        AVDT_TRACE_WARNING0("avdt_sec_check_complete_term: NULL BD_ADDR");
+        return;
+
+    }
+    p_ccb = avdt_ccb_by_bd(bd_addr);
+
+    p_tbl = avdt_ad_tc_tbl_by_st(AVDT_CHAN_SIG, p_ccb, AVDT_AD_ST_SEC_ACP);
+    if (p_tbl == NULL)
+        return;
+
+    if (res == BTM_SUCCESS)
+    {
+	    /* Send response to the L2CAP layer. */
+        L2CA_ConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_OK, L2CAP_CONN_OK);
+
+        /* store idx in LCID table, store LCID in routing table */
+        avdt_cb.ad.lcid_tbl[p_tbl->lcid - L2CAP_BASE_APPL_CID] = avdt_ad_tc_tbl_to_idx(p_tbl);
+        avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][p_tbl->tcid].lcid = p_tbl->lcid;
+
+        /* transition to configuration state */
+        p_tbl->state = AVDT_AD_ST_CFG;
+
+        /* Send L2CAP config req */
+        memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        cfg.mtu_present = TRUE;
+        cfg.mtu = p_tbl->my_mtu;
+        cfg.flush_to_present = TRUE;
+        cfg.flush_to = p_tbl->my_flush_to;
+        L2CA_ConfigReq(p_tbl->lcid, &cfg);
+    }
+    else
+    {
+        L2CA_ConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK);
+        avdt_ad_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_sec_check_complete_orig
+**
+** Description      The function called when Security Manager finishes
+**                  verification of the service side connection
+**
+** Returns          void
+**
+*******************************************************************************/
+static void avdt_sec_check_complete_orig (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tAVDT_CCB       *p_ccb = NULL;
+    tL2CAP_CFG_INFO cfg;
+    tAVDT_TC_TBL    *p_tbl;
+
+    AVDT_TRACE_DEBUG1("avdt_sec_check_complete_orig res: %d", res);
+    if (bd_addr)
+        p_ccb = avdt_ccb_by_bd(bd_addr);
+    p_tbl = avdt_ad_tc_tbl_by_st(AVDT_CHAN_SIG, p_ccb, AVDT_AD_ST_SEC_INT);
+    if(p_tbl == NULL)
+        return;
+
+    if( res == BTM_SUCCESS )
+    {
+        /* set channel state */
+        p_tbl->state = AVDT_AD_ST_CFG;
+
+        /* Send L2CAP config req */
+        memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        cfg.mtu_present = TRUE;
+        cfg.mtu = p_tbl->my_mtu;
+        cfg.flush_to_present = TRUE;
+        cfg.flush_to = p_tbl->my_flush_to;
+        L2CA_ConfigReq(p_tbl->lcid, &cfg);
+    }
+    else
+    {
+        L2CA_DisconnectReq (p_tbl->lcid);
+        avdt_ad_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
+    }
+}
+/*******************************************************************************
+**
+** Function         avdt_l2c_connect_ind_cback
+**
+** Description      This is the L2CAP connect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_connect_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    tAVDT_CCB       *p_ccb;
+    tAVDT_TC_TBL    *p_tbl = NULL;
+    UINT16          result;
+    tL2CAP_CFG_INFO cfg;
+    tBTM_STATUS rc;
+
+    /* do we already have a control channel for this peer? */
+    if ((p_ccb = avdt_ccb_by_bd(bd_addr)) == NULL)
+    {
+        /* no, allocate ccb */
+        if ((p_ccb = avdt_ccb_alloc(bd_addr)) == NULL)
+        {
+            /* no ccb available, reject L2CAP connection */
+            result = L2CAP_CONN_NO_RESOURCES;
+        }
+        else
+        {
+            /* allocate and set up entry; first channel is always signaling */
+            p_tbl = avdt_ad_tc_tbl_alloc(p_ccb);
+            p_tbl->my_mtu = avdt_cb.rcb.ctrl_mtu;
+            p_tbl->my_flush_to = L2CAP_DEFAULT_FLUSH_TO;
+            p_tbl->tcid = AVDT_CHAN_SIG;
+            p_tbl->lcid = lcid;
+            p_tbl->id   = id;
+            p_tbl->state = AVDT_AD_ST_SEC_ACP;
+            p_tbl->cfg_flags = AVDT_L2C_CFG_CONN_ACP;
+
+            /* Check the security */
+            rc = btm_sec_mx_access_request (bd_addr, AVDT_PSM,
+                FALSE, BTM_SEC_PROTO_AVDT,
+                AVDT_CHAN_SIG,
+                &avdt_sec_check_complete_term, NULL);
+            if(rc == BTM_CMD_STARTED)
+            {
+                L2CA_ConnectRsp (p_ccb->peer_addr, p_tbl->id, lcid, L2CAP_CONN_PENDING, L2CAP_CONN_OK);
+            }
+            return;
+        }
+    }
+    /* deal with simultaneous control channel connect case */
+    else if ((p_tbl = avdt_ad_tc_tbl_by_st(AVDT_CHAN_SIG, p_ccb, AVDT_AD_ST_CONN)) != NULL)
+    {
+        /* reject their connection */
+        result = L2CAP_CONN_NO_RESOURCES;
+    }
+    /* this must be a traffic channel; are we accepting a traffic channel
+    ** for this ccb?
+    */
+    else if ((p_tbl = avdt_ad_tc_tbl_by_st(AVDT_CHAN_MEDIA, p_ccb, AVDT_AD_ST_ACP)) != NULL)
+    {
+        /* yes; proceed with connection */
+        result = L2CAP_CONN_OK;
+    }
+#if AVDT_REPORTING == TRUE
+    /* this must be a reporting channel; are we accepting a reporting channel
+    ** for this ccb?
+    */
+    else if ((p_tbl = avdt_ad_tc_tbl_by_st(AVDT_CHAN_REPORT, p_ccb, AVDT_AD_ST_ACP)) != NULL)
+    {
+        /* yes; proceed with connection */
+        result = L2CAP_CONN_OK;
+    }
+#endif
+    /* else we're not listening for traffic channel; reject */
+    else
+    {
+        result = L2CAP_CONN_NO_PSM;
+    }
+
+    /* Send L2CAP connect rsp */
+    L2CA_ConnectRsp(bd_addr, id, lcid, result, 0);
+
+    /* if result ok, proceed with connection */
+    if (result == L2CAP_CONN_OK)
+    {
+        /* store idx in LCID table, store LCID in routing table */
+        avdt_cb.ad.lcid_tbl[lcid - L2CAP_BASE_APPL_CID] = avdt_ad_tc_tbl_to_idx(p_tbl);
+        avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][p_tbl->tcid].lcid = lcid;
+
+        /* transition to configuration state */
+        p_tbl->state = AVDT_AD_ST_CFG;
+
+        /* Send L2CAP config req */
+        memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        cfg.mtu_present = TRUE;
+        cfg.mtu = p_tbl->my_mtu;
+        cfg.flush_to_present = TRUE;
+        cfg.flush_to = p_tbl->my_flush_to;
+        L2CA_ConfigReq(lcid, &cfg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_connect_cfm_cback
+**
+** Description      This is the L2CAP connect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tAVDT_TC_TBL    *p_tbl;
+    tL2CAP_CFG_INFO cfg;
+    tAVDT_CCB *p_ccb;
+
+    AVDT_TRACE_DEBUG2("avdt_l2c_connect_cfm_cback lcid: %d, result: %d",
+        lcid, result);
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        /* if in correct state */
+        if (p_tbl->state == AVDT_AD_ST_CONN)
+        {
+            /* if result successful */
+            if (result == L2CAP_CONN_OK)
+            {
+                if(p_tbl->tcid != AVDT_CHAN_SIG)
+                {
+                    /* set channel state */
+                    p_tbl->state = AVDT_AD_ST_CFG;
+
+                    /* Send L2CAP config req */
+                    memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+                    cfg.mtu_present = TRUE;
+                    cfg.mtu = p_tbl->my_mtu;
+                    cfg.flush_to_present = TRUE;
+                    cfg.flush_to = p_tbl->my_flush_to;
+                    L2CA_ConfigReq(lcid, &cfg);
+                }
+                else
+                {
+                    p_ccb = avdt_ccb_by_idx(p_tbl->ccb_idx);
+                    if(p_ccb == NULL)
+                    {
+                        result = L2CAP_CONN_NO_RESOURCES;
+                    }
+                    else
+                    {
+                        /* set channel state */
+                        p_tbl->state = AVDT_AD_ST_SEC_INT;
+                        p_tbl->lcid = lcid;
+                        p_tbl->cfg_flags = AVDT_L2C_CFG_CONN_INT;
+
+                        /* Check the security */
+                        btm_sec_mx_access_request (p_ccb->peer_addr, AVDT_PSM,
+                            TRUE, BTM_SEC_PROTO_AVDT,
+                            AVDT_CHAN_SIG,
+                            &avdt_sec_check_complete_orig, NULL);
+                    }
+                }
+            }
+
+            /* failure; notify adaption that channel closed */
+            if (result != L2CAP_CONN_OK)
+            {
+                avdt_ad_tc_close_ind(p_tbl, result);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_config_cfm_cback
+**
+** Description      This is the L2CAP config confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        /* if in correct state */
+        if (p_tbl->state == AVDT_AD_ST_CFG)
+        {
+            /* if result successful */
+            if (p_cfg->result == L2CAP_CONN_OK)
+            {
+                /* update cfg_flags */
+                p_tbl->cfg_flags |= AVDT_L2C_CFG_CFM_DONE;
+
+                /* if configuration complete */
+                if (p_tbl->cfg_flags & AVDT_L2C_CFG_IND_DONE)
+                {
+                    avdt_ad_tc_open_ind(p_tbl);
+                }
+            }
+            /* else failure */
+            else
+            {
+                /* Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_config_ind_cback
+**
+** Description      This is the L2CAP config indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        /* store the mtu in tbl */
+        if (p_cfg->mtu_present)
+        {
+            p_tbl->peer_mtu = p_cfg->mtu;
+        }
+        else
+        {
+            p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+        }
+        AVDT_TRACE_DEBUG2("peer_mtu: %d, lcid: x%x",p_tbl->peer_mtu, lcid);
+
+        /* send L2CAP configure response */
+        memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        p_cfg->result = L2CAP_CFG_OK;
+        L2CA_ConfigRsp(lcid, p_cfg);
+
+        /* if first config ind */
+        if ((p_tbl->cfg_flags & AVDT_L2C_CFG_IND_DONE) == 0)
+        {
+            /* update cfg_flags */
+            p_tbl->cfg_flags |= AVDT_L2C_CFG_IND_DONE;
+
+            /* if configuration complete */
+            if (p_tbl->cfg_flags & AVDT_L2C_CFG_CFM_DONE)
+            {
+                avdt_ad_tc_open_ind(p_tbl);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_disconnect_ind_cback
+**
+** Description      This is the L2CAP disconnect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    AVDT_TRACE_DEBUG2("avdt_l2c_disconnect_ind_cback lcid: %d, ack_needed: %d",
+        lcid, ack_needed);
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        if (ack_needed)
+        {
+            /* send L2CAP disconnect response */
+            L2CA_DisconnectRsp(lcid);
+        }
+
+        avdt_ad_tc_close_ind(p_tbl, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_disconnect_cfm_cback
+**
+** Description      This is the L2CAP disconnect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    AVDT_TRACE_DEBUG2("avdt_l2c_disconnect_cfm_cback lcid: %d, result: %d",
+        lcid, result);
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        avdt_ad_tc_close_ind(p_tbl, result);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_congestion_ind_cback
+**
+** Description      This is the L2CAP congestion indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        avdt_ad_tc_cong_ind(p_tbl, is_congested);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_l2c_data_ind_cback
+**
+** Description      This is the L2CAP data indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void avdt_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf)
+{
+    tAVDT_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = avdt_ad_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        avdt_ad_tc_data_ind(p_tbl, p_buf);
+    }
+    else /* prevent buffer leak */
+        GKI_freebuf(p_buf);
+}
+
diff --git a/stack/avdt/avdt_msg.c b/stack/avdt/avdt_msg.c
new file mode 100644
index 0000000..5d9c2fb
--- /dev/null
+++ b/stack/avdt/avdt_msg.c
@@ -0,0 +1,1891 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains functions for parsing and building AVDTP signaling
+ *  messages.  It also contains functions called by the SCB or CCB state
+ *  machines for sending command, response, and reject messages.  It also
+ *  contains a function that processes incoming messages and dispatches them
+ *  to the appropriate SCB or CCB.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "gki.h"
+#include "btu.h"
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* mask of all psc values */
+#define AVDT_MSG_PSC_MASK   (AVDT_PSC_TRANS | AVDT_PSC_REPORT | AVDT_PSC_DELAY_RPT | \
+                             AVDT_PSC_RECOV | AVDT_PSC_HDRCMP | AVDT_PSC_MUX)
+#define AVDT_PSC_PROTECT    (1<<4)  /* Content Protection */
+#define AVDT_PSC_CODEC      (1<<7)  /* codec */
+
+
+/*****************************************************************************
+** type definitions
+*****************************************************************************/
+
+/* type for message building functions */
+typedef void (*tAVDT_MSG_BLD)(UINT8 **p, tAVDT_MSG *p_msg);
+
+/* type for message parsing functions */
+typedef UINT8 (*tAVDT_MSG_PRS)(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+
+
+/*****************************************************************************
+** local function declarations
+*****************************************************************************/
+
+static void avdt_msg_bld_none(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_single(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_setconfig_cmd(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_reconfig_cmd(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_multi(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_security_cmd(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_discover_rsp(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_svccap(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_security_rsp(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_all_svccap(UINT8 **p, tAVDT_MSG *p_msg);
+static void avdt_msg_bld_delay_rpt(UINT8 **p, tAVDT_MSG *p_msg);
+
+static UINT8 avdt_msg_prs_none(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_single(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_setconfig_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_reconfig_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_multi(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_security_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_discover_rsp(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_svccap(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_all_svccap(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_security_rsp(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+static UINT8 avdt_msg_prs_delay_rpt (tAVDT_MSG *p_msg, UINT8 *p, UINT16 len);
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* table of information element minimum lengths used for parsing */
+const UINT8 avdt_msg_ie_len_min[] = {
+    0,                              /* unused */
+    AVDT_LEN_TRANS_MIN,             /* media transport */
+    AVDT_LEN_REPORT_MIN,            /* reporting */
+    AVDT_LEN_RECOV_MIN,             /* recovery */
+    AVDT_LEN_PROTECT_MIN,           /* content protection */
+    AVDT_LEN_HDRCMP_MIN,            /* header compression */
+    AVDT_LEN_MUX_MIN,               /* multiplexing */
+    AVDT_LEN_CODEC_MIN,             /* codec */
+    AVDT_LEN_DELAY_RPT_MIN          /* delay report */
+};
+
+/* table of information element minimum lengths used for parsing */
+const UINT8 avdt_msg_ie_len_max[] = {
+    0,                              /* unused */
+    AVDT_LEN_TRANS_MAX,             /* media transport */
+    AVDT_LEN_REPORT_MAX,            /* reporting */
+    AVDT_LEN_RECOV_MAX,             /* recovery */
+    AVDT_LEN_PROTECT_MAX,           /* content protection */
+    AVDT_LEN_HDRCMP_MAX,            /* header compression */
+    AVDT_LEN_MUX_MAX,               /* multiplexing */
+    AVDT_LEN_CODEC_MAX,             /* codec */
+    AVDT_LEN_DELAY_RPT_MAX          /* delay report */
+};
+
+/* table of error codes used when decoding information elements */
+const UINT8 avdt_msg_ie_err[] = {
+    0,                              /* unused */
+    AVDT_ERR_MEDIA_TRANS,           /* media transport */
+    AVDT_ERR_LENGTH,                /* reporting */
+    AVDT_ERR_RECOV_FMT,             /* recovery */
+    AVDT_ERR_CP_FMT,                /* content protection */
+    AVDT_ERR_ROHC_FMT,              /* header compression */
+    AVDT_ERR_MUX_FMT,               /* multiplexing */
+    AVDT_ERR_SERVICE,               /* codec */
+    AVDT_ERR_SERVICE                /* delay report ?? */
+};
+
+/* table of packet type minimum lengths */
+static const UINT8 avdt_msg_pkt_type_len[] = {
+    AVDT_LEN_TYPE_SINGLE,
+    AVDT_LEN_TYPE_START,
+    AVDT_LEN_TYPE_CONT,
+    AVDT_LEN_TYPE_END
+};
+
+/* function table for building command messages */
+const tAVDT_MSG_BLD avdt_msg_bld_cmd[] = {
+    avdt_msg_bld_none,            /* discover */
+    avdt_msg_bld_single,          /* get capabilities */
+    avdt_msg_bld_setconfig_cmd,   /* set configuration */
+    avdt_msg_bld_single,          /* get configuration */
+    avdt_msg_bld_reconfig_cmd,    /* reconfigure */
+    avdt_msg_bld_single,          /* open */
+    avdt_msg_bld_multi,           /* start */
+    avdt_msg_bld_single,          /* close */
+    avdt_msg_bld_multi,           /* suspend */
+    avdt_msg_bld_single,          /* abort */
+    avdt_msg_bld_security_cmd,    /* security control */
+    avdt_msg_bld_single,          /* get all capabilities */
+    avdt_msg_bld_delay_rpt        /* delay report */
+};
+
+/* function table for building response messages */
+const tAVDT_MSG_BLD avdt_msg_bld_rsp[] = {
+    avdt_msg_bld_discover_rsp,    /* discover */
+    avdt_msg_bld_svccap,          /* get capabilities */
+    avdt_msg_bld_none,            /* set configuration */
+    avdt_msg_bld_all_svccap,      /* get configuration */
+    avdt_msg_bld_none,            /* reconfigure */
+    avdt_msg_bld_none,            /* open */
+    avdt_msg_bld_none,            /* start */
+    avdt_msg_bld_none,            /* close */
+    avdt_msg_bld_none,            /* suspend */
+    avdt_msg_bld_none,            /* abort */
+    avdt_msg_bld_security_rsp,    /* security control */
+    avdt_msg_bld_all_svccap,      /* get all capabilities */
+    avdt_msg_bld_none             /* delay report */
+};
+
+/* function table for parsing command messages */
+const tAVDT_MSG_PRS avdt_msg_prs_cmd[] = {
+    avdt_msg_prs_none,            /* discover */
+    avdt_msg_prs_single,          /* get capabilities */
+    avdt_msg_prs_setconfig_cmd,   /* set configuration */
+    avdt_msg_prs_single,          /* get configuration */
+    avdt_msg_prs_reconfig_cmd,    /* reconfigure */
+    avdt_msg_prs_single,          /* open */
+    avdt_msg_prs_multi,           /* start */
+    avdt_msg_prs_single,          /* close */
+    avdt_msg_prs_multi,           /* suspend */
+    avdt_msg_prs_single,          /* abort */
+    avdt_msg_prs_security_cmd,    /* security control */
+    avdt_msg_prs_single,          /* get all capabilities */
+    avdt_msg_prs_delay_rpt        /* delay report */
+};
+
+/* function table for parsing response messages */
+const tAVDT_MSG_PRS avdt_msg_prs_rsp[] = {
+    avdt_msg_prs_discover_rsp,    /* discover */
+    avdt_msg_prs_svccap,          /* get capabilities */
+    avdt_msg_prs_none,            /* set configuration */
+    avdt_msg_prs_all_svccap,      /* get configuration */
+    avdt_msg_prs_none,            /* reconfigure */
+    avdt_msg_prs_none,            /* open */
+    avdt_msg_prs_none,            /* start */
+    avdt_msg_prs_none,            /* close */
+    avdt_msg_prs_none,            /* suspend */
+    avdt_msg_prs_none,            /* abort */
+    avdt_msg_prs_security_rsp,    /* security control */
+    avdt_msg_prs_all_svccap,      /* get all capabilities */
+    avdt_msg_prs_none             /* delay report */
+};
+
+/* command message-to-event lookup table */
+const UINT8 avdt_msg_cmd_2_evt[] = {
+    AVDT_CCB_MSG_DISCOVER_CMD_EVT + AVDT_CCB_MKR,   /* discover */
+    AVDT_CCB_MSG_GETCAP_CMD_EVT + AVDT_CCB_MKR,     /* get capabilities */
+    AVDT_SCB_MSG_SETCONFIG_CMD_EVT,                 /* set configuration */
+    AVDT_SCB_MSG_GETCONFIG_CMD_EVT,                 /* get configuration */
+    AVDT_SCB_MSG_RECONFIG_CMD_EVT,                  /* reconfigure */
+    AVDT_SCB_MSG_OPEN_CMD_EVT,                      /* open */
+    AVDT_CCB_MSG_START_CMD_EVT + AVDT_CCB_MKR,      /* start */
+    AVDT_SCB_MSG_CLOSE_CMD_EVT,                     /* close */
+    AVDT_CCB_MSG_SUSPEND_CMD_EVT + AVDT_CCB_MKR,    /* suspend */
+    AVDT_SCB_MSG_ABORT_CMD_EVT,                     /* abort */
+    AVDT_SCB_MSG_SECURITY_CMD_EVT,                  /* security control */
+    AVDT_CCB_MSG_GETCAP_CMD_EVT + AVDT_CCB_MKR,     /* get all capabilities */
+    AVDT_SCB_MSG_DELAY_RPT_CMD_EVT                  /* delay report */
+};
+
+/* response message-to-event lookup table */
+const UINT8 avdt_msg_rsp_2_evt[] = {
+    AVDT_CCB_MSG_DISCOVER_RSP_EVT + AVDT_CCB_MKR,   /* discover */
+    AVDT_CCB_MSG_GETCAP_RSP_EVT + AVDT_CCB_MKR,     /* get capabilities */
+    AVDT_SCB_MSG_SETCONFIG_RSP_EVT,                 /* set configuration */
+    AVDT_SCB_MSG_GETCONFIG_RSP_EVT,                 /* get configuration */
+    AVDT_SCB_MSG_RECONFIG_RSP_EVT,                  /* reconfigure */
+    AVDT_SCB_MSG_OPEN_RSP_EVT,                      /* open */
+    AVDT_CCB_MSG_START_RSP_EVT + AVDT_CCB_MKR,      /* start */
+    AVDT_SCB_MSG_CLOSE_RSP_EVT,                     /* close */
+    AVDT_CCB_MSG_SUSPEND_RSP_EVT + AVDT_CCB_MKR,    /* suspend */
+    AVDT_SCB_MSG_ABORT_RSP_EVT,                     /* abort */
+    AVDT_SCB_MSG_SECURITY_RSP_EVT,                  /* security control */
+    AVDT_CCB_MSG_GETCAP_RSP_EVT + AVDT_CCB_MKR,     /* get all capabilities */
+    AVDT_SCB_MSG_DELAY_RPT_RSP_EVT                  /* delay report */
+};
+
+/* reject message-to-event lookup table */
+const UINT8 avdt_msg_rej_2_evt[] = {
+    AVDT_CCB_MSG_DISCOVER_RSP_EVT + AVDT_CCB_MKR,   /* discover */
+    AVDT_CCB_MSG_GETCAP_RSP_EVT + AVDT_CCB_MKR,     /* get capabilities */
+    AVDT_SCB_MSG_SETCONFIG_REJ_EVT,                 /* set configuration */
+    AVDT_SCB_MSG_GETCONFIG_RSP_EVT,                 /* get configuration */
+    AVDT_SCB_MSG_RECONFIG_RSP_EVT,                  /* reconfigure */
+    AVDT_SCB_MSG_OPEN_REJ_EVT,                      /* open */
+    AVDT_CCB_MSG_START_RSP_EVT + AVDT_CCB_MKR,      /* start */
+    AVDT_SCB_MSG_CLOSE_RSP_EVT,                     /* close */
+    AVDT_CCB_MSG_SUSPEND_RSP_EVT + AVDT_CCB_MKR,    /* suspend */
+    AVDT_SCB_MSG_ABORT_RSP_EVT,                     /* abort */
+    AVDT_SCB_MSG_SECURITY_RSP_EVT,                  /* security control */
+    AVDT_CCB_MSG_GETCAP_RSP_EVT + AVDT_CCB_MKR,     /* get all capabilities */
+    0                                               /* delay report */
+};
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_cfg
+**
+** Description      This function builds the configuration parameters contained
+**                  in a command or response message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_cfg(UINT8 **p, tAVDT_CFG *p_cfg)
+{
+    UINT8 len;
+
+    /* for now, just build media transport, codec, and content protection, and multiplexing */
+
+    /* media transport */
+    if (p_cfg->psc_mask & AVDT_PSC_TRANS)
+    {
+        *(*p)++ = AVDT_CAT_TRANS;
+        *(*p)++ = 0; /* length */
+    }
+
+#if AVDT_REPORTING == TRUE
+    /* reporting transport */
+    if (p_cfg->psc_mask & AVDT_PSC_REPORT)
+    {
+        *(*p)++ = AVDT_CAT_REPORT;
+        *(*p)++ = 0; /* length */
+    }
+#endif
+
+    /* codec */
+    if (p_cfg->num_codec != 0)
+    {
+        *(*p)++ = AVDT_CAT_CODEC;
+        len = p_cfg->codec_info[0] + 1;
+        if( len > AVDT_CODEC_SIZE )
+            len = AVDT_CODEC_SIZE;
+
+        memcpy(*p, p_cfg->codec_info, len);
+        *p += len;
+    }
+
+    /* content protection */
+    if (p_cfg->num_protect != 0)
+    {
+        *(*p)++ = AVDT_CAT_PROTECT;
+        len = p_cfg->protect_info[0] + 1;
+        if( len > AVDT_PROTECT_SIZE )
+            len = AVDT_PROTECT_SIZE;
+
+        memcpy(*p, p_cfg->protect_info, len);
+        *p += len;
+    }
+
+#if AVDT_MULTIPLEXING == TRUE
+    /* multiplexing */
+    if (p_cfg->psc_mask & AVDT_PSC_MUX)
+    {
+        *(*p)++ = AVDT_CAT_MUX;
+        /* length */
+        if (p_cfg->psc_mask & AVDT_PSC_RECOV)
+            *(*p)++ = 7; /* frag (1) + media + report + recovery */
+        else if (p_cfg->psc_mask & AVDT_PSC_REPORT)
+            *(*p)++ = 5; /* frag (1) + media + report */
+        else
+            *(*p)++ = 3; /* frag (1) + media */
+
+        /* allow fragmentation */
+        if(p_cfg->mux_mask & AVDT_MUX_FRAG)
+            *(*p)++ = 0x80;
+        else
+            *(*p)++ = 0;
+
+        /* media transport session */
+        *(*p)++ = p_cfg->mux_tsid_media<<3; /* TSID */
+        *(*p)++ = p_cfg->mux_tcid_media<<3; /* TCID */
+
+        if (p_cfg->psc_mask & AVDT_PSC_RECOV)
+        {
+            /* reporting transport session */
+            *(*p)++ = p_cfg->mux_tsid_report<<3; /* TSID */
+            *(*p)++ = p_cfg->mux_tcid_report<<3; /* TCID */
+            /* recovery transport session */
+            *(*p)++ = p_cfg->mux_tsid_recov<<3; /* TSID */
+            *(*p)++ = p_cfg->mux_tcid_recov<<3; /* TCID */
+        }
+        else if (p_cfg->psc_mask & AVDT_PSC_REPORT)
+        {
+            /* reporting transport session */
+            *(*p)++ = p_cfg->mux_tsid_report<<3; /* TSID */
+            *(*p)++ = p_cfg->mux_tcid_report<<3; /* TCID */
+        }
+    }
+#endif
+
+    /* delay report */
+    if (p_cfg->psc_mask & AVDT_PSC_DELAY_RPT)
+    {
+        *(*p)++ = AVDT_CAT_DELAY_RPT;
+        *(*p)++ = 0; /* length */
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_none
+**
+** Description      This message building function builds an empty message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_none(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_single
+**
+** Description      This message building function builds a message containing
+**                  a single SEID.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_single(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    AVDT_MSG_BLD_SEID(*p, p_msg->single.seid);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_setconfig_cmd
+**
+** Description      This message building function builds a set configuration
+**                  command message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_setconfig_cmd(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    AVDT_MSG_BLD_SEID(*p, p_msg->config_cmd.hdr.seid);
+    AVDT_MSG_BLD_SEID(*p, p_msg->config_cmd.int_seid);
+    avdt_msg_bld_cfg(p, p_msg->config_cmd.p_cfg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_reconfig_cmd
+**
+** Description      This message building function builds a reconfiguration
+**                  command message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_reconfig_cmd(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    AVDT_MSG_BLD_SEID(*p, p_msg->reconfig_cmd.hdr.seid);
+
+    /* force psc mask zero to build only codec and security */
+    p_msg->reconfig_cmd.p_cfg->psc_mask = 0;
+    avdt_msg_bld_cfg(p, p_msg->reconfig_cmd.p_cfg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_multi
+**
+** Description      This message building function builds a message containing
+**                  multiple SEID's.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_multi(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    int i;
+
+    for (i = 0; i < p_msg->multi.num_seps; i++)
+    {
+        AVDT_MSG_BLD_SEID(*p, p_msg->multi.seid_list[i]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_security_cmd
+**
+** Description      This message building function builds a security
+**                  command message.
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_security_cmd(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    AVDT_MSG_BLD_SEID(*p, p_msg->security_cmd.hdr.seid);
+    memcpy(*p, p_msg->security_cmd.p_data, p_msg->security_cmd.len);
+    *p += p_msg->security_cmd.len;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_delay_rpt
+**
+** Description      This message building function builds a delay report
+**                  command message.
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_delay_rpt(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    AVDT_MSG_BLD_SEID(*p, p_msg->delay_rpt_cmd.hdr.seid);
+    UINT16_TO_BE_STREAM(*p, p_msg->delay_rpt_cmd.delay);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_discover_rsp
+**
+** Description      This message building function builds a discover
+**                  response message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_discover_rsp(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    int     i;
+
+    for (i = 0; i < p_msg->discover_rsp.num_seps; i++)
+    {
+        /* build discover rsp info */
+        AVDT_MSG_BLD_DISC(*p, p_msg->discover_rsp.p_sep_info[i].seid,
+                              p_msg->discover_rsp.p_sep_info[i].in_use,
+                              p_msg->discover_rsp.p_sep_info[i].media_type,
+                              p_msg->discover_rsp.p_sep_info[i].tsep);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_svccap
+**
+** Description      This message building function builds a message containing
+**                  service capabilities parameters.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_svccap(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    tAVDT_CFG cfg;
+
+    /* make sure the delay report category is not reported */
+    memcpy (&cfg, p_msg->svccap.p_cfg, sizeof(tAVDT_CFG));
+    cfg.psc_mask &= ~AVDT_PSC_DELAY_RPT;
+    avdt_msg_bld_cfg(p, &cfg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_all_svccap
+**
+** Description      This message building function builds a message containing
+**                  service capabilities parameters.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_all_svccap(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    avdt_msg_bld_cfg(p, p_msg->svccap.p_cfg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_bld_security_rsp
+**
+** Description      This message building function builds a security
+**                  response message.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void avdt_msg_bld_security_rsp(UINT8 **p, tAVDT_MSG *p_msg)
+{
+    memcpy(*p, p_msg->security_rsp.p_data, p_msg->security_rsp.len);
+    *p += p_msg->security_rsp.len;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_cfg
+**
+** Description      This message parsing function parses the configuration
+**                  parameters field of a message.
+**
+**
+** Returns          Error code or zero if no error, and element that failed
+**                  in p_elem.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_cfg(tAVDT_CFG *p_cfg, UINT8 *p, UINT16 len, UINT8* p_elem, UINT8 sig_id)
+{
+    UINT8   *p_end;
+    UINT8   elem = 0;
+    UINT8   elem_len;
+    UINT8   tmp;
+    UINT8   err = 0;
+    UINT8   protect_offset = 0;
+
+    if (!p_cfg)
+    {
+        AVDT_TRACE_ERROR0 ("not expecting this cfg");
+        return AVDT_ERR_BAD_STATE;
+    }
+
+    p_cfg->psc_mask = 0;
+    p_cfg->num_codec = 0;
+    p_cfg->num_protect = 0;
+#if AVDT_MULTIPLEXING == TRUE
+    p_cfg->mux_mask = 0;
+#endif
+
+    /* while there is still data to parse */
+    p_end = p + len;
+    while ((p < p_end) && (err == 0))
+    {
+        /* verify overall length */
+        if ((p_end - p) < AVDT_LEN_CFG_MIN)
+        {
+            err = AVDT_ERR_PAYLOAD;
+            break;
+        }
+
+        /* get and verify info elem id, length */
+        elem = *p++;
+        elem_len = *p++;
+
+        if ((elem == 0) || (elem > AVDT_CAT_MAX_CUR))
+        {
+            /* this may not be really bad.
+             * It may be a service category that is too new for us.
+             * allow these to be parsed without reporting an error.
+             * If this is a "capability" (as in GetCapRsp & GetConfigRsp), this is filtered out.
+             * If this is a Configuration (as in SetConfigCmd & ReconfigCmd),
+             *    this will be marked as an error in the caller of this function */
+            if ((sig_id == AVDT_SIG_SETCONFIG) || (sig_id == AVDT_SIG_RECONFIG))
+            {
+                /* Cannot accept unknown category. */
+                err = AVDT_ERR_CATEGORY;
+                break;
+            }
+            else    /* GETCAP or GET_ALLCAP */
+            {
+                /* Skip unknown categories. */
+                p += elem_len;
+                AVDT_TRACE_DEBUG2("skipping unknown service category=%d len: %d", elem, elem_len);
+                continue;
+            }
+        }
+
+        if ((elem_len > avdt_msg_ie_len_max[elem]) ||
+            (elem_len < avdt_msg_ie_len_min[elem]))
+        {
+            err = avdt_msg_ie_err[elem];
+            break;
+        }
+
+        /* add element to psc mask, but mask out codec or protect */
+        p_cfg->psc_mask |= (1 << elem);
+        AVDT_TRACE_DEBUG3("elem=%d elem_len: %d psc_mask=0x%x", elem, elem_len, p_cfg->psc_mask);
+
+        /* parse individual information elements with additional parameters */
+        switch (elem)
+        {
+            case AVDT_CAT_RECOV:
+                p_cfg->recov_type = *p++;
+                p_cfg->recov_mrws = *p++;
+                p_cfg->recov_mnmp = *p++;
+                if (p_cfg->recov_type != AVDT_RECOV_RFC2733)
+                {
+                    err = AVDT_ERR_RECOV_TYPE;
+                }
+                else if ((p_cfg->recov_mrws < AVDT_RECOV_MRWS_MIN) ||
+                         (p_cfg->recov_mrws > AVDT_RECOV_MRWS_MAX) ||
+                         (p_cfg->recov_mnmp < AVDT_RECOV_MNMP_MIN) ||
+                         (p_cfg->recov_mnmp > AVDT_RECOV_MNMP_MAX))
+                {
+                    err = AVDT_ERR_RECOV_FMT;
+                }
+                break;
+
+            case AVDT_CAT_PROTECT:
+                p_cfg->psc_mask &= ~AVDT_PSC_PROTECT;
+                if ((elem_len + protect_offset) < AVDT_PROTECT_SIZE)
+                {
+                    p_cfg->num_protect++;
+                    p_cfg->protect_info[protect_offset] = elem_len;
+                    protect_offset++;
+                    memcpy(&p_cfg->protect_info[protect_offset], p, elem_len);
+                    protect_offset += elem_len;
+                }
+                p += elem_len;
+                break;
+
+            case AVDT_CAT_HDRCMP:
+                p_cfg->hdrcmp_mask = *p++;
+                break;
+
+#if AVDT_MULTIPLEXING == TRUE
+            case AVDT_CAT_MUX:
+                /* verify length */
+                AVDT_TRACE_WARNING2("psc_mask=0x%x elem_len=%d", p_cfg->psc_mask, elem_len);
+                if( ((0 == (p_cfg->psc_mask & (AVDT_PSC_RECOV|AVDT_PSC_REPORT))) && (elem_len != 3))
+                    || ((p_cfg->psc_mask & AVDT_PSC_RECOV) && (elem_len != 7))
+                    || ((p_cfg->psc_mask & AVDT_PSC_REPORT) && (elem_len != 5)) )
+                {
+                    err = AVDT_ERR_MUX_FMT;
+                    break;
+                }
+
+                /* parse fragmentation */
+                p_cfg->mux_mask = *p++ & (UINT8)AVDT_MUX_FRAG;
+
+                /* parse TSIDs and TCIDs */
+                if(--elem_len)
+                    p_cfg->mux_tsid_media = (*p++)>>3;
+                else
+                    break;
+
+                if(--elem_len)
+                    p_cfg->mux_tcid_media = (*p++)>>3;
+                else
+                    break;
+
+                if(--elem_len)
+                    p_cfg->mux_tsid_report = (*p++)>>3;
+                else
+                    break;
+
+                if(--elem_len)
+                    p_cfg->mux_tcid_report = (*p++)>>3;
+                else
+                    break;
+
+                if(--elem_len)
+                    p_cfg->mux_tsid_recov = (*p++)>>3;
+                else
+                    break;
+
+                if(--elem_len)
+                    p_cfg->mux_tcid_recov = (*p++)>>3;
+                else
+                    break;
+                break;
+#endif
+
+            case AVDT_CAT_CODEC:
+                p_cfg->psc_mask &= ~AVDT_PSC_CODEC;
+                tmp = elem_len;
+                if (elem_len >= AVDT_CODEC_SIZE)
+                {
+                    tmp = AVDT_CODEC_SIZE - 1;
+                }
+                p_cfg->num_codec++;
+                p_cfg->codec_info[0] = elem_len;
+                memcpy(&p_cfg->codec_info[1], p, tmp);
+                p += elem_len;
+                break;
+
+            case AVDT_CAT_DELAY_RPT:
+                break;
+
+            default:
+                p += elem_len;
+                break;
+        } /* switch */
+    } /* while ! err, !end*/
+    *p_elem = elem;
+    AVDT_TRACE_DEBUG3("err=0x%x, elem:0x%x psc_mask=0x%x", err, elem, p_cfg->psc_mask);
+
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_none
+**
+** Description      This message parsing function parses a message with no parameters.
+
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_none(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_single
+**
+** Description      This message parsing function parses a message with a
+**                  single SEID.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_single(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8       err = 0;
+
+    /* verify len */
+    if (len != AVDT_LEN_SINGLE)
+    {
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        AVDT_MSG_PRS_SEID(p, p_msg->single.seid);
+
+        if (avdt_scb_by_hdl(p_msg->single.seid) == NULL)
+        {
+            err = AVDT_ERR_SEID;
+        }
+    }
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_setconfig_cmd
+**
+** Description      This message parsing function parses a set configuration
+**                  command message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_setconfig_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8       err = 0;
+
+    p_msg->hdr.err_param = 0;
+
+    /* verify len */
+    if (len < AVDT_LEN_SETCONFIG_MIN)
+    {
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        /* get seids */
+        AVDT_MSG_PRS_SEID(p, p_msg->config_cmd.hdr.seid);
+        if (avdt_scb_by_hdl(p_msg->config_cmd.hdr.seid) == NULL)
+        {
+            err = AVDT_ERR_SEID;
+        }
+
+        AVDT_MSG_PRS_SEID(p, p_msg->config_cmd.int_seid);
+        if ((p_msg->config_cmd.int_seid < AVDT_SEID_MIN) ||
+            (p_msg->config_cmd.int_seid > AVDT_SEID_MAX))
+        {
+            err = AVDT_ERR_SEID;
+        }
+    }
+
+    if (!err)
+    {
+        /* parse configuration parameters */
+        len -= 2;
+        err = avdt_msg_prs_cfg(p_msg->config_cmd.p_cfg, p, len, &p_msg->hdr.err_param, AVDT_SIG_SETCONFIG);
+
+        if (!err)
+        {
+            /* verify protocol service capabilities are supported */
+            if (((p_msg->config_cmd.p_cfg->psc_mask & (~AVDT_PSC)) != 0) ||
+                (p_msg->config_cmd.p_cfg->num_codec == 0))
+            {
+                err = AVDT_ERR_INVALID_CAP;
+            }
+        }
+    }
+
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_reconfig_cmd
+**
+** Description      This message parsing function parses a reconfiguration
+**                  command message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_reconfig_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8       err = 0;
+
+    p_msg->hdr.err_param = 0;
+
+    /* verify len */
+    if (len < AVDT_LEN_RECONFIG_MIN)
+    {
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        /* get seid */
+        AVDT_MSG_PRS_SEID(p, p_msg->reconfig_cmd.hdr.seid);
+        if (avdt_scb_by_hdl(p_msg->reconfig_cmd.hdr.seid) == NULL)
+        {
+            err = AVDT_ERR_SEID;
+        }
+        else
+        {
+            /* parse config parameters */
+            len--;
+            err = avdt_msg_prs_cfg(p_msg->config_cmd.p_cfg, p, len, &p_msg->hdr.err_param, AVDT_SIG_RECONFIG);
+
+            /* verify no protocol service capabilities in parameters */
+            if (!err)
+            {
+                AVDT_TRACE_DEBUG2("avdt_msg_prs_reconfig_cmd psc_mask=0x%x/0x%x", p_msg->config_cmd.p_cfg->psc_mask, AVDT_MSG_PSC_MASK);
+                if ((p_msg->config_cmd.p_cfg->psc_mask != 0) ||
+                    (p_msg->config_cmd.p_cfg->num_codec == 0 && p_msg->config_cmd.p_cfg->num_protect == 0))
+                {
+                    err = AVDT_ERR_INVALID_CAP;
+                }
+            }
+        }
+    }
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_multi
+**
+** Description      This message parsing function parses a message containing
+**                  multiple SEID's.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_multi(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    int     i;
+    UINT8   err = 0;
+
+    p_msg->hdr.err_param = 0;
+
+    /* verify len */
+    if (len < AVDT_LEN_MULTI_MIN || (len > AVDT_NUM_SEPS))
+    {
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        /* get and verify all seps */
+        for (i = 0; i < len; i++)
+        {
+            AVDT_MSG_PRS_SEID(p, p_msg->multi.seid_list[i]);
+            if (avdt_scb_by_hdl(p_msg->multi.seid_list[i]) == NULL)
+            {
+                err = AVDT_ERR_SEID;
+                p_msg->hdr.err_param = p_msg->multi.seid_list[i];
+                break;
+            }
+        }
+        p_msg->multi.num_seps = (UINT8)i;
+    }
+
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_security_cmd
+**
+** Description      This message parsing function parses a security
+**                  command message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_security_cmd(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8       err = 0;
+
+    /* verify len */
+    if (len < AVDT_LEN_SECURITY_MIN)
+    {
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        /* get seid */
+        AVDT_MSG_PRS_SEID(p, p_msg->security_cmd.hdr.seid);
+        if (avdt_scb_by_hdl(p_msg->security_cmd.hdr.seid) == NULL)
+        {
+            err = AVDT_ERR_SEID;
+        }
+        else
+        {
+            p_msg->security_cmd.p_data = p;
+            p_msg->security_cmd.len = len - 1;
+        }
+    }
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_discover_rsp
+**
+** Description      This message parsing function parses a discover
+**                  response message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_discover_rsp(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    int     i;
+    UINT8   err = 0;
+
+    /* determine number of seps; seps in msg is len/2, but set to minimum
+    ** of seps app has supplied memory for and seps in msg
+    */
+    if (p_msg->discover_rsp.num_seps > (len / 2))
+    {
+        p_msg->discover_rsp.num_seps = (len / 2);
+    }
+
+    /* parse out sep info */
+    for (i = 0; i < p_msg->discover_rsp.num_seps; i++)
+    {
+        /* parse discover rsp info */
+        AVDT_MSG_PRS_DISC(p, p_msg->discover_rsp.p_sep_info[i].seid,
+                          p_msg->discover_rsp.p_sep_info[i].in_use,
+                          p_msg->discover_rsp.p_sep_info[i].media_type,
+                          p_msg->discover_rsp.p_sep_info[i].tsep);
+
+        /* verify that seid is valid */
+        if ((p_msg->discover_rsp.p_sep_info[i].seid < AVDT_SEID_MIN) ||
+            (p_msg->discover_rsp.p_sep_info[i].seid > AVDT_SEID_MAX))
+        {
+            err = AVDT_ERR_SEID;
+            break;
+        }
+    }
+
+    return err;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_svccap
+**
+** Description      This message parsing function parses a message containing
+**                  service capabilities parameters.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_svccap(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    /* parse parameters */
+    UINT8   err = avdt_msg_prs_cfg(p_msg->svccap.p_cfg, p, len, &p_msg->hdr.err_param, AVDT_SIG_GETCAP);
+    if (p_msg->svccap.p_cfg)
+    {
+        p_msg->svccap.p_cfg->psc_mask &= AVDT_LEG_PSC;
+    }
+
+    return (err);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_all_svccap
+**
+** Description      This message parsing function parses a message containing
+**                  service capabilities parameters.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_all_svccap(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8   err = avdt_msg_prs_cfg(p_msg->svccap.p_cfg, p, len, &p_msg->hdr.err_param, AVDT_SIG_GET_ALLCAP);
+    if (p_msg->svccap.p_cfg)
+    {
+        p_msg->svccap.p_cfg->psc_mask &= AVDT_MSG_PSC_MASK;
+    }
+    return (err);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_security_rsp
+**
+** Description      This message parsing function parsing a security
+**                  response message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_security_rsp(tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    p_msg->security_rsp.p_data = p;
+    p_msg->security_rsp.len = len;
+
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_rej
+**
+** Description
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_rej(tAVDT_MSG *p_msg, UINT8 *p, UINT8 sig)
+{
+    if ((sig == AVDT_SIG_SETCONFIG) || (sig == AVDT_SIG_RECONFIG))
+    {
+        p_msg->hdr.err_param = *p++;
+        p_msg->hdr.err_code = *p;
+    }
+    else if ((sig == AVDT_SIG_START) || (sig == AVDT_SIG_SUSPEND))
+    {
+        AVDT_MSG_PRS_SEID(p, p_msg->hdr.err_param);
+        p_msg->hdr.err_code = *p;
+    }
+    else
+    {
+        p_msg->hdr.err_code = *p;
+    }
+
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_prs_delay_rpt
+**
+** Description      This message parsing function parses a security
+**                  command message.
+**
+**
+** Returns          Error code or zero if no error.
+**
+*******************************************************************************/
+static UINT8 avdt_msg_prs_delay_rpt (tAVDT_MSG *p_msg, UINT8 *p, UINT16 len)
+{
+    UINT8       err = 0;
+
+    /* verify len */
+    if (len != AVDT_LEN_DELAY_RPT)
+    {
+        AVDT_TRACE_WARNING2("avdt_msg_prs_delay_rpt expected len: %u  got: %u", AVDT_LEN_DELAY_RPT, len);
+        err = AVDT_ERR_LENGTH;
+    }
+    else
+    {
+        /* get seid */
+        AVDT_MSG_PRS_SEID (p, p_msg->delay_rpt_cmd.hdr.seid);
+
+        if (avdt_scb_by_hdl(p_msg->delay_rpt_cmd.hdr.seid) == NULL)
+        {
+            err = AVDT_ERR_SEID;
+        }
+        else
+        {
+            BE_STREAM_TO_UINT16 (p_msg->delay_rpt_cmd.delay, p);
+            AVDT_TRACE_DEBUG1("avdt_msg_prs_delay_rpt delay: %u", p_msg->delay_rpt_cmd.delay);
+        }
+    }
+    return err;
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_msg_send
+**
+** Description      Send, and if necessary fragment the next message.
+**
+**
+** Returns          Congested state; TRUE if CCB congested, FALSE if not.
+**
+*******************************************************************************/
+BOOLEAN avdt_msg_send(tAVDT_CCB *p_ccb, BT_HDR *p_msg)
+{
+    UINT16          curr_msg_len;
+    UINT8           pkt_type;
+    UINT8           hdr_len;
+    tAVDT_TC_TBL    *p_tbl;
+    BT_HDR          *p_buf;
+    UINT8           *p;
+    UINT8           label;
+    UINT8           msg;
+    UINT8           sig;
+    UINT8           nosp = 0;       /* number of subsequent packets */
+
+    /* look up transport channel table entry to get peer mtu */
+    p_tbl = avdt_ad_tc_tbl_by_type(AVDT_CHAN_SIG, p_ccb, NULL);
+
+    /* set the current message if there is a message passed in */
+    if (p_msg != NULL)
+    {
+        p_ccb->p_curr_msg = p_msg;
+    }
+
+    /* store copy of curr_msg->len */
+    curr_msg_len = p_ccb->p_curr_msg->len;
+
+    /* while not congested and we haven't sent it all */
+    while ((!p_ccb->cong) && (p_ccb->p_curr_msg != NULL))
+    {
+        /* check what kind of message we've got here; we are using the offset
+        ** to indicate that a message is being fragmented
+        */
+
+        /* if message isn't being fragmented and it fits in mtu */
+        if ((p_ccb->p_curr_msg->offset == AVDT_MSG_OFFSET) &&
+            (p_ccb->p_curr_msg->len <= p_tbl->peer_mtu - AVDT_LEN_TYPE_SINGLE))
+        {
+            pkt_type = AVDT_PKT_TYPE_SINGLE;
+            hdr_len = AVDT_LEN_TYPE_SINGLE;
+            p_buf = p_ccb->p_curr_msg;
+        }
+        /* if message isn't being fragmented and it doesn't fit in mtu */
+        else if ((p_ccb->p_curr_msg->offset == AVDT_MSG_OFFSET) &&
+                 (p_ccb->p_curr_msg->len > p_tbl->peer_mtu - AVDT_LEN_TYPE_SINGLE))
+        {
+            pkt_type = AVDT_PKT_TYPE_START;
+            hdr_len = AVDT_LEN_TYPE_START;
+            nosp = (p_ccb->p_curr_msg->len + AVDT_LEN_TYPE_START - p_tbl->peer_mtu) /
+                   (p_tbl->peer_mtu - 1) + 2;
+
+            /* get a new buffer for fragment we are sending */
+            if ((p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID)) == NULL)
+            {
+                /* do we even want to try and recover from this? could do so
+                by setting retransmission timer */
+                return TRUE;
+            }
+
+            /* copy portion of data from current message to new buffer */
+            p_buf->offset = L2CAP_MIN_OFFSET + hdr_len;
+            p_buf->len = p_tbl->peer_mtu - hdr_len;
+            memcpy((UINT8 *)(p_buf + 1) + p_buf->offset,
+                   (UINT8 *)(p_ccb->p_curr_msg + 1) + p_ccb->p_curr_msg->offset, p_buf->len);
+        }
+        /* if message is being fragmented and remaining bytes don't fit in mtu */
+        else if ((p_ccb->p_curr_msg->offset > AVDT_MSG_OFFSET) &&
+                 (p_ccb->p_curr_msg->len > (p_tbl->peer_mtu - AVDT_LEN_TYPE_CONT)))
+        {
+            pkt_type = AVDT_PKT_TYPE_CONT;
+            hdr_len = AVDT_LEN_TYPE_CONT;
+
+            /* get a new buffer for fragment we are sending */
+            if ((p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID)) == NULL)
+            {
+                /* do we even want to try and recover from this? could do so
+                by setting retransmission timer */
+                return TRUE;
+            }
+
+            /* copy portion of data from current message to new buffer */
+            p_buf->offset = L2CAP_MIN_OFFSET + hdr_len;
+            p_buf->len = p_tbl->peer_mtu - hdr_len;
+            memcpy((UINT8 *)(p_buf + 1) + p_buf->offset,
+                   (UINT8 *)(p_ccb->p_curr_msg + 1) + p_ccb->p_curr_msg->offset, p_buf->len);
+        }
+        /* if message is being fragmented and remaining bytes do fit in mtu */
+        else
+        {
+            pkt_type = AVDT_PKT_TYPE_END;
+            hdr_len = AVDT_LEN_TYPE_END;
+            p_buf = p_ccb->p_curr_msg;
+        }
+
+        /* label, sig id, msg type are in hdr of p_curr_msg */
+        label = AVDT_LAYERSPEC_LABEL(p_ccb->p_curr_msg->layer_specific);
+        msg = AVDT_LAYERSPEC_MSG(p_ccb->p_curr_msg->layer_specific);
+        sig = (UINT8) p_ccb->p_curr_msg->event;
+        AVDT_TRACE_DEBUG3("avdt_msg_send label:%d, msg:%d, sig:%d", label, msg, sig);
+
+        /* keep track of how much of msg we've sent */
+        curr_msg_len -= p_buf->len;
+        if (curr_msg_len == 0)
+        {
+            /* entire message sent; mark as finished */
+            p_ccb->p_curr_msg = NULL;
+
+            /* start timer here for commands */
+            if (msg == AVDT_MSG_TYPE_CMD)
+            {
+                /* if retransmit timeout set to zero, sig doesn't use retransmit */
+                if ((sig == AVDT_SIG_DISCOVER) || (sig == AVDT_SIG_GETCAP) ||
+                    (sig == AVDT_SIG_SECURITY) || (avdt_cb.rcb.ret_tout == 0))
+                {
+                    btu_start_timer(&p_ccb->timer_entry, BTU_TTYPE_AVDT_CCB_RSP, avdt_cb.rcb.sig_tout);
+                }
+                else if (sig != AVDT_SIG_DELAY_RPT)
+                {
+                    btu_start_timer(&p_ccb->timer_entry, BTU_TTYPE_AVDT_CCB_RET, avdt_cb.rcb.ret_tout);
+                }
+            }
+        }
+        else
+        {
+            /* message being fragmented and not completely sent */
+            p_ccb->p_curr_msg->len -= p_buf->len;
+            p_ccb->p_curr_msg->offset += p_buf->len;
+        }
+
+        /* set up to build header */
+        p_buf->len += hdr_len;
+        p_buf->offset -= hdr_len;
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+        /* build header */
+        AVDT_MSG_BLD_HDR(p, label, pkt_type, msg);
+        if (pkt_type == AVDT_PKT_TYPE_START)
+        {
+            AVDT_MSG_BLD_NOSP(p, nosp);
+        }
+        if ((pkt_type == AVDT_PKT_TYPE_START) || (pkt_type == AVDT_PKT_TYPE_SINGLE))
+        {
+            AVDT_MSG_BLD_SIG(p, sig);
+        }
+
+        /* send msg buffer down */
+        avdt_ad_write_req(AVDT_CHAN_SIG, p_ccb, NULL, p_buf);
+    }
+    return (p_ccb->cong);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_asmbl
+**
+** Description      Reassemble incoming message.
+**
+**
+** Returns          Pointer to reassembled message;  NULL if no message
+**                  available.
+**
+*******************************************************************************/
+BT_HDR *avdt_msg_asmbl(tAVDT_CCB *p_ccb, BT_HDR *p_buf)
+{
+    UINT8   *p;
+    UINT8   pkt_type;
+    BT_HDR  *p_ret;
+    UINT16  buf_len;
+
+    /* parse the message header */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    AVDT_MSG_PRS_PKT_TYPE(p, pkt_type);
+
+    /* quick sanity check on length */
+    if (p_buf->len < avdt_msg_pkt_type_len[pkt_type])
+    {
+        GKI_freebuf(p_buf);
+        AVDT_TRACE_WARNING0("Bad length during reassembly");
+        p_ret = NULL;
+    }
+    /* single packet */
+    else if (pkt_type == AVDT_PKT_TYPE_SINGLE)
+    {
+        /* if reassembly in progress drop message and process new single */
+        if (p_ccb->p_rx_msg != NULL)
+        {
+            GKI_freebuf(p_ccb->p_rx_msg);
+            p_ccb->p_rx_msg = NULL;
+            AVDT_TRACE_WARNING0("Got single during reassembly");
+        }
+        p_ret = p_buf;
+    }
+    /* start packet */
+    else if (pkt_type == AVDT_PKT_TYPE_START)
+    {
+        /* if reassembly in progress drop message and process new single */
+        if (p_ccb->p_rx_msg != NULL)
+        {
+            GKI_freebuf(p_ccb->p_rx_msg);
+            AVDT_TRACE_WARNING0("Got start during reassembly");
+        }
+        p_ccb->p_rx_msg = p_buf;
+
+        /* copy first header byte over nosp */
+        *(p + 1) = *p;
+
+        /* set offset to point to where to copy next */
+        p_ccb->p_rx_msg->offset += p_ccb->p_rx_msg->len;
+
+        /* adjust length for packet header */
+        p_ccb->p_rx_msg->len -= 1;
+
+        p_ret = NULL;
+    }
+    /* continue or end */
+    else
+    {
+        /* if no reassembly in progress drop message */
+        if (p_ccb->p_rx_msg == NULL)
+        {
+            GKI_freebuf(p_buf);
+            AVDT_TRACE_WARNING1("Pkt type=%d out of order", pkt_type);
+            p_ret = NULL;
+        }
+        else
+        {
+            /* get size of buffer holding assembled message */
+            buf_len = GKI_get_buf_size(p_ccb->p_rx_msg) - sizeof(BT_HDR);
+
+            /* adjust offset and len of fragment for header byte */
+            p_buf->offset += AVDT_LEN_TYPE_CONT;
+            p_buf->len -= AVDT_LEN_TYPE_CONT;
+
+            /* verify length */
+            if ((p_ccb->p_rx_msg->offset + p_buf->len) > buf_len)
+            {
+                /* won't fit; free everything */
+                GKI_freebuf(p_ccb->p_rx_msg);
+                p_ccb->p_rx_msg = NULL;
+                GKI_freebuf(p_buf);
+                p_ret = NULL;
+            }
+            else
+            {
+                /* copy contents of p_buf to p_rx_msg */
+                memcpy((UINT8 *)(p_ccb->p_rx_msg + 1) + p_ccb->p_rx_msg->offset,
+                       (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len);
+
+                if (pkt_type == AVDT_PKT_TYPE_END)
+                {
+                    p_ccb->p_rx_msg->offset -= p_ccb->p_rx_msg->len;
+                    p_ccb->p_rx_msg->len += p_buf->len;
+                    p_ret = p_ccb->p_rx_msg;
+                    p_ccb->p_rx_msg = NULL;
+                }
+                else
+                {
+                    p_ccb->p_rx_msg->offset += p_buf->len;
+                    p_ccb->p_rx_msg->len += p_buf->len;
+                    p_ret = NULL;
+                }
+                GKI_freebuf(p_buf);
+            }
+        }
+    }
+    return p_ret;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_send_cmd
+**
+** Description      This function is called to send a command message.  The
+**                  sig_id parameter indicates the message type, p_params
+**                  points to the message parameters, if any.  It gets a buffer
+**                  from the AVDTP command pool, executes the message building
+**                  function for this message type.  It then queues the message
+**                  in the command queue for this CCB.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_msg_send_cmd(tAVDT_CCB *p_ccb, void *p_scb, UINT8 sig_id, tAVDT_MSG *p_params)
+{
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT8       *p_start;
+
+    /* get a buffer */
+    p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID);
+    if (p_buf == NULL)
+    {
+        AVDT_TRACE_ERROR0("avdt_msg_send_cmd out of buffer!!");
+        return;
+    }
+
+    /* set up gki buf pointer and offset */
+    p_buf->offset = AVDT_MSG_OFFSET;
+    p_start = p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* execute parameter building function to build message */
+    (*avdt_msg_bld_cmd[sig_id - 1])(&p, p_params);
+
+    /* set len */
+    p_buf->len = (UINT16) (p - p_start);
+
+    /* now store scb hdls, if any, in buf */
+    if (p_scb != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1);
+
+        /* for start and suspend, p_scb points to array of handles */
+        if ((sig_id == AVDT_SIG_START) || (sig_id == AVDT_SIG_SUSPEND))
+        {
+            memcpy(p, (UINT8 *) p_scb, p_buf->len);
+        }
+        /* for all others, p_scb points to scb as usual */
+        else
+        {
+            *p = avdt_scb_to_hdl((tAVDT_SCB *) p_scb);
+        }
+    }
+
+    /* stash sig, label, and message type in buf */
+    p_buf->event = sig_id;
+    AVDT_BLD_LAYERSPEC(p_buf->layer_specific, AVDT_MSG_TYPE_CMD, p_ccb->label);
+
+    /* increment label */
+    p_ccb->label = (p_ccb->label + 1) % 16;
+
+    /* queue message and trigger ccb to send it */
+    GKI_enqueue(&p_ccb->cmd_q, p_buf);
+    avdt_ccb_event(p_ccb, AVDT_CCB_SENDMSG_EVT, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_msg_send_rsp
+**
+** Description      This function is called to send a response message.  The
+**                  sig_id parameter indicates the message type, p_params
+**                  points to the message parameters, if any.  It gets a buffer
+**                  from the AVDTP command pool, executes the message building
+**                  function for this message type.  It then queues the message
+**                  in the response queue for this CCB.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_msg_send_rsp(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params)
+{
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT8       *p_start;
+
+    /* get a buffer */
+    p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID);
+    if (p_buf == NULL) return;
+
+    /* set up gki buf pointer and offset */
+    p_buf->offset = AVDT_MSG_OFFSET;
+    p_start = p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* execute parameter building function to build message */
+    (*avdt_msg_bld_rsp[sig_id - 1])(&p, p_params);
+
+    /* set length */
+    p_buf->len = (UINT16) (p - p_start);
+
+    /* stash sig, label, and message type in buf */
+    p_buf->event = sig_id;
+    AVDT_BLD_LAYERSPEC(p_buf->layer_specific, AVDT_MSG_TYPE_RSP, p_params->hdr.label);
+
+    /* queue message and trigger ccb to send it */
+    GKI_enqueue(&p_ccb->rsp_q, p_buf);
+    avdt_ccb_event(p_ccb, AVDT_CCB_SENDMSG_EVT, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_msg_send_rej
+**
+** Description      This function is called to send a reject message.  The
+**                  sig_id parameter indicates the message type.  It gets
+**                  a buffer from the AVDTP command pool and builds the
+**                  message based on the message type and the error code.
+**                  It then queues the message in the response queue for
+**                  this CCB.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_msg_send_rej(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params)
+{
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT8       *p_start;
+
+    /* get a buffer */
+    p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID);
+    if (p_buf == NULL) return;
+
+    /* set up gki buf pointer and offset */
+    p_buf->offset = AVDT_MSG_OFFSET;
+    p_start = p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* if sig id included, build into message */
+    if (sig_id != AVDT_SIG_NONE)
+    {
+        /* if this sig has a parameter, add the parameter */
+        if ((sig_id == AVDT_SIG_SETCONFIG) ||
+            (sig_id == AVDT_SIG_RECONFIG))
+        {
+            AVDT_MSG_BLD_PARAM(p, p_params->hdr.err_param);
+        }
+        else if ((sig_id == AVDT_SIG_START) ||
+                 (sig_id == AVDT_SIG_SUSPEND))
+        {
+            AVDT_MSG_BLD_SEID(p, p_params->hdr.err_param);
+        }
+
+        /* add the error code */
+        AVDT_MSG_BLD_ERR(p, p_params->hdr.err_code);
+    }
+    AVDT_TRACE_DEBUG0("avdt_msg_send_rej");
+
+    /* calculate length */
+    p_buf->len = (UINT16) (p - p_start);
+
+    /* stash sig, label, and message type in buf */
+    p_buf->event = sig_id;
+    AVDT_BLD_LAYERSPEC(p_buf->layer_specific, AVDT_MSG_TYPE_REJ, p_params->hdr.label);
+
+    /* queue message and trigger ccb to send it */
+    GKI_enqueue(&p_ccb->rsp_q, p_buf);
+    avdt_ccb_event(p_ccb, AVDT_CCB_SENDMSG_EVT, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_send_grej
+**
+** Description      This function is called to send a general reject message.  The
+**                  sig_id parameter indicates the message type.  It gets
+**                  a buffer from the AVDTP command pool and builds the
+**                  message based on the message type and the error code.
+**                  It then queues the message in the response queue for
+**                  this CCB.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_msg_send_grej(tAVDT_CCB *p_ccb, UINT8 sig_id, tAVDT_MSG *p_params)
+{
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT8       *p_start;
+
+    /* get a buffer */
+    p_buf = (BT_HDR *) GKI_getpoolbuf(AVDT_CMD_POOL_ID);
+    if (p_buf == NULL) return;
+
+    /* set up gki buf pointer and offset */
+    p_buf->offset = AVDT_MSG_OFFSET;
+    p_start = p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* calculate length */
+    p_buf->len = (UINT16) (p - p_start);
+
+    /* stash sig, label, and message type in buf */
+    p_buf->event = sig_id;
+    AVDT_BLD_LAYERSPEC(p_buf->layer_specific, AVDT_MSG_TYPE_GRJ, p_params->hdr.label);
+    //p_buf->event = 0;
+    //AVDT_BLD_LAYERSPEC(p_buf->layer_specific, 0, p_params->hdr.label);
+    AVDT_TRACE_DEBUG0("avdt_msg_send_grej");
+
+    /* queue message and trigger ccb to send it */
+    GKI_enqueue(&p_ccb->rsp_q, p_buf);
+    avdt_ccb_event(p_ccb, AVDT_CCB_SENDMSG_EVT, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_msg_ind
+**
+** Description      This function is called by the adaption layer when an
+**                  incoming message is received on the signaling channel.
+**                  It parses the message and sends an event to the appropriate
+**                  SCB or CCB for the message.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_msg_ind(tAVDT_CCB *p_ccb, BT_HDR *p_buf)
+{
+    tAVDT_SCB   *p_scb;
+    UINT8       *p;
+    BOOLEAN     ok = TRUE;
+    BOOLEAN     handle_rsp = FALSE;
+    BOOLEAN     gen_rej = FALSE;
+    UINT8       label;
+    UINT8       pkt_type;
+    UINT8       msg_type;
+    UINT8       sig = 0;
+    tAVDT_MSG   msg;
+    tAVDT_CFG   cfg;
+    UINT8       err;
+    UINT8       evt = 0;
+    UINT8       scb_hdl;
+
+    /* reassemble message; if no message available (we received a fragment) return */
+    if ((p_buf = avdt_msg_asmbl(p_ccb, p_buf)) == NULL)
+    {
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* parse the message header */
+    AVDT_MSG_PRS_HDR(p, label, pkt_type, msg_type);
+
+    /* AVDT_TRACE_DEBUG1("msg_type=%d", msg_type); */
+    /* set up label and ccb_idx in message hdr */
+    msg.hdr.label = label;
+    msg.hdr.ccb_idx = avdt_ccb_to_idx(p_ccb);
+
+    /* verify msg type */
+    if (msg_type == AVDT_MSG_TYPE_GRJ)
+    {
+        AVDT_TRACE_WARNING1("Dropping msg msg_type=%d", msg_type);
+        ok = FALSE;
+    }
+    /* check for general reject */
+    else if ((msg_type == AVDT_MSG_TYPE_REJ) && (p_buf->len == AVDT_LEN_GEN_REJ))
+    {
+        gen_rej = TRUE;
+        if (p_ccb->p_curr_cmd != NULL)
+        {
+            msg.hdr.sig_id = sig = (UINT8) p_ccb->p_curr_cmd->event;
+            evt = avdt_msg_rej_2_evt[sig - 1];
+            msg.hdr.err_code = AVDT_ERR_NSC;
+            msg.hdr.err_param = 0;
+        }
+    }
+    else /* not a general reject */
+    {
+        /* get and verify signal */
+        AVDT_MSG_PRS_SIG(p, sig);
+        msg.hdr.sig_id = sig;
+        if ((sig == 0) || (sig > AVDT_SIG_MAX))
+        {
+            AVDT_TRACE_WARNING2("Dropping msg sig=%d msg_type:%d", sig, msg_type);
+            ok = FALSE;
+
+            /* send a general reject */
+            if (msg_type == AVDT_MSG_TYPE_CMD)
+            {
+                avdt_msg_send_grej(p_ccb, sig, &msg);
+            }
+        }
+    }
+
+    if (ok && !gen_rej)
+    {
+        /* skip over header (msg length already verified during reassembly) */
+        p_buf->len -= AVDT_LEN_TYPE_SINGLE;
+
+        /* set up to parse message */
+        if ((msg_type == AVDT_MSG_TYPE_RSP) && (sig == AVDT_SIG_DISCOVER))
+        {
+            /* parse discover rsp message to struct supplied by app */
+            msg.discover_rsp.p_sep_info = (tAVDT_SEP_INFO *) p_ccb->p_proc_data;
+            msg.discover_rsp.num_seps = p_ccb->proc_param;
+        }
+        else if ((msg_type == AVDT_MSG_TYPE_RSP) &&
+            ((sig == AVDT_SIG_GETCAP) || (sig == AVDT_SIG_GET_ALLCAP)))
+        {
+            /* parse discover rsp message to struct supplied by app */
+            msg.svccap.p_cfg = (tAVDT_CFG *) p_ccb->p_proc_data;
+        }
+        else if ((msg_type == AVDT_MSG_TYPE_RSP) && (sig == AVDT_SIG_GETCONFIG))
+        {
+            /* parse get config rsp message to struct allocated locally */
+            msg.svccap.p_cfg = &cfg;
+        }
+        else if ((msg_type == AVDT_MSG_TYPE_CMD) && (sig == AVDT_SIG_SETCONFIG))
+        {
+            /* parse config cmd message to struct allocated locally */
+            msg.config_cmd.p_cfg = &cfg;
+        }
+        else if ((msg_type == AVDT_MSG_TYPE_CMD) && (sig == AVDT_SIG_RECONFIG))
+        {
+            /* parse reconfig cmd message to struct allocated locally */
+            msg.reconfig_cmd.p_cfg = &cfg;
+        }
+
+        /* parse message; while we're at it map message sig to event */
+        if (msg_type == AVDT_MSG_TYPE_CMD)
+        {
+            msg.hdr.err_code = err = (*avdt_msg_prs_cmd[sig - 1])(&msg, p, p_buf->len);
+            evt = avdt_msg_cmd_2_evt[sig - 1];
+        }
+        else if (msg_type == AVDT_MSG_TYPE_RSP)
+        {
+            msg.hdr.err_code = err = (*avdt_msg_prs_rsp[sig - 1])(&msg, p, p_buf->len);
+            evt = avdt_msg_rsp_2_evt[sig - 1];
+        }
+        else /* msg_type == AVDT_MSG_TYPE_REJ */
+        {
+            err = avdt_msg_prs_rej(&msg, p, sig);
+            evt = avdt_msg_rej_2_evt[sig - 1];
+        }
+
+        /* if parsing failed */
+        if (err != 0)
+        {
+            AVDT_TRACE_WARNING2("Parsing failed sig=%d err=0x%x", sig, err);
+
+            /* if its a rsp or rej, drop it; if its a cmd, send a rej;
+            ** note special case for abort; never send abort reject
+            */
+            ok = FALSE;
+            if ((msg_type == AVDT_MSG_TYPE_CMD) && (sig != AVDT_SIG_ABORT))
+            {
+                avdt_msg_send_rej(p_ccb, sig, &msg);
+            }
+        }
+    }
+
+    /* if its a rsp or rej, check sent cmd to see if we're waiting for
+    ** the rsp or rej.  If we didn't send a cmd for it, drop it.  If
+    ** it does match a cmd, stop timer for the cmd.
+    */
+    if (ok)
+    {
+        if ((msg_type == AVDT_MSG_TYPE_RSP) || (msg_type == AVDT_MSG_TYPE_REJ))
+        {
+            if ((p_ccb->p_curr_cmd != NULL) &&
+                (p_ccb->p_curr_cmd->event == sig) &&
+                (AVDT_LAYERSPEC_LABEL(p_ccb->p_curr_cmd->layer_specific) == label))
+            {
+                /* stop timer */
+                btu_stop_timer(&p_ccb->timer_entry);
+
+                /* clear retransmission count */
+                p_ccb->ret_count = 0;
+
+                /* later in this function handle ccb event */
+                handle_rsp = TRUE;
+            }
+            else
+            {
+                ok = FALSE;
+                AVDT_TRACE_WARNING2("Cmd not found for rsp sig=%d label=%d", sig, label);
+            }
+        }
+    }
+
+    if (ok)
+    {
+        /* if it's a ccb event send to ccb */
+        if (evt & AVDT_CCB_MKR)
+        {
+            avdt_ccb_event(p_ccb, (UINT8)(evt & ~AVDT_CCB_MKR), (tAVDT_CCB_EVT *) &msg);
+        }
+        /* if it's a scb event */
+        else
+        {
+            /* Scb events always have a single seid.  For cmd, get seid from
+            ** message.  For rej and rsp, get seid from p_curr_cmd.
+            */
+            if (msg_type == AVDT_MSG_TYPE_CMD)
+            {
+                scb_hdl = msg.single.seid;
+            }
+            else
+            {
+                scb_hdl = *((UINT8 *)(p_ccb->p_curr_cmd + 1));
+            }
+
+            /* Map seid to the scb and send it the event.  For cmd, seid has
+            ** already been verified by parsing function.
+            */
+            if (evt && (p_scb = avdt_scb_by_hdl(scb_hdl)) != NULL)
+            {
+                avdt_scb_event(p_scb, evt, (tAVDT_SCB_EVT *) &msg);
+            }
+        }
+    }
+
+    /* free message buffer */
+    GKI_freebuf(p_buf);
+
+    /* if its a rsp or rej, send event to ccb to free associated
+    ** cmd msg buffer and handle cmd queue
+    */
+    if (handle_rsp)
+    {
+        avdt_ccb_event(p_ccb, AVDT_CCB_RCVRSP_EVT, NULL);
+    }
+}
diff --git a/stack/avdt/avdt_scb.c b/stack/avdt/avdt_scb.c
new file mode 100644
index 0000000..b44af06
--- /dev/null
+++ b/stack/avdt/avdt_scb.c
@@ -0,0 +1,800 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the stream control block and functions which
+ *  operate on the stream control block.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "gki.h"
+#include "btu.h"
+
+/*****************************************************************************
+** state machine constants and types
+*****************************************************************************/
+#if AVDT_DEBUG == TRUE
+
+/* verbose state strings for trace */
+const char * const avdt_scb_st_str[] = {
+    "SCB_IDLE_ST",
+    "SCB_CONF_ST",
+    "SCB_OPENING_ST",
+    "SCB_OPEN_ST",
+    "SCB_STREAM_ST",
+    "SCB_CLOSING_ST"
+};
+
+/* verbose event strings for trace */
+const char * const avdt_scb_evt_str[] = {
+    "API_REMOVE_EVT",
+    "API_WRITE_REQ_EVT",
+    "API_GETCONFIG_REQ_EVT",
+    "API_DELAY_RPT_REQ",
+    "API_SETCONFIG_REQ_EVT",
+    "API_OPEN_REQ_EVT",
+    "API_CLOSE_REQ_EVT",
+    "API_RECONFIG_REQ_EVT",
+    "API_SECURITY_REQ_EVT",
+    "API_ABORT_REQ_EVT",
+    "API_GETCONFIG_RSP_EVT",
+    "API_SETCONFIG_RSP_EVT",
+    "API_SETCONFIG_REJ_EVT",
+    "API_OPEN_RSP_EVT",
+    "API_CLOSE_RSP_EVT",
+    "API_RECONFIG_RSP_EVT",
+    "API_SECURITY_RSP_EVT",
+    "API_ABORT_RSP_EVT",
+    "MSG_SETCONFIG_CMD_EVT",
+    "MSG_GETCONFIG_CMD_EVT",
+    "MSG_OPEN_CMD_EVT",
+    "MSG_START_CMD_EVT",
+    "MSG_SUSPEND_CMD_EVT",
+    "MSG_CLOSE_CMD_EVT",
+    "MSG_ABORT_CMD_EVT",
+    "MSG_RECONFIG_CMD_EVT",
+    "MSG_SECURITY_CMD_EVT",
+    "MSG_DELAY_RPT_CMD_EVT",
+    "MSG_DELAY_RPT_RSP_EVT",
+    "MSG_SETCONFIG_RSP_EVT",
+    "MSG_GETCONFIG_RSP_EVT",
+    "MSG_OPEN_RSP_EVT",
+    "MSG_START_RSP_EVT",
+    "MSG_SUSPEND_RSP_EVT",
+    "MSG_CLOSE_RSP_EVT",
+    "MSG_ABORT_RSP_EVT",
+    "MSG_RECONFIG_RSP_EVT",
+    "MSG_SECURITY_RSP_EVT",
+    "MSG_SETCONFIG_REJ_EVT",
+    "MSG_OPEN_REJ_EVT",
+    "MSG_START_REJ_EVT",
+    "MSG_SUSPEND_REJ_EVT",
+    "TC_TOUT_EVT",
+    "TC_OPEN_EVT",
+    "TC_CLOSE_EVT",
+    "TC_CONG_EVT",
+    "TC_DATA_EVT",
+    "CC_CLOSE_EVT"
+};
+
+#endif
+
+
+/* action function list */
+const tAVDT_SCB_ACTION avdt_scb_action[] = {
+    avdt_scb_hdl_abort_cmd,
+    avdt_scb_hdl_abort_rsp,
+    avdt_scb_hdl_close_cmd,
+    avdt_scb_hdl_close_rsp,
+    avdt_scb_hdl_getconfig_cmd,
+    avdt_scb_hdl_getconfig_rsp,
+    avdt_scb_hdl_open_cmd,
+    avdt_scb_hdl_open_rej,
+    avdt_scb_hdl_open_rsp,
+    avdt_scb_hdl_pkt,
+    avdt_scb_drop_pkt,
+    avdt_scb_hdl_reconfig_cmd,
+    avdt_scb_hdl_reconfig_rsp,
+    avdt_scb_hdl_security_cmd,
+    avdt_scb_hdl_security_rsp,
+    avdt_scb_hdl_setconfig_cmd,
+    avdt_scb_hdl_setconfig_rej,
+    avdt_scb_hdl_setconfig_rsp,
+    avdt_scb_hdl_start_cmd,
+    avdt_scb_hdl_start_rsp,
+    avdt_scb_hdl_suspend_cmd,
+    avdt_scb_hdl_suspend_rsp,
+    avdt_scb_hdl_tc_close,
+#if AVDT_REPORTING == TRUE
+    avdt_scb_hdl_tc_close_sto,
+#endif
+    avdt_scb_hdl_tc_open,
+#if AVDT_REPORTING == TRUE
+    avdt_scb_hdl_tc_open_sto,
+#endif
+    avdt_scb_snd_delay_rpt_req,
+    avdt_scb_hdl_delay_rpt_cmd,
+    avdt_scb_hdl_delay_rpt_rsp,
+    avdt_scb_hdl_write_req,
+    avdt_scb_snd_abort_req,
+    avdt_scb_snd_abort_rsp,
+    avdt_scb_snd_close_req,
+    avdt_scb_snd_stream_close,
+    avdt_scb_snd_close_rsp,
+    avdt_scb_snd_getconfig_req,
+    avdt_scb_snd_getconfig_rsp,
+    avdt_scb_snd_open_req,
+    avdt_scb_snd_open_rsp,
+    avdt_scb_snd_reconfig_req,
+    avdt_scb_snd_reconfig_rsp,
+    avdt_scb_snd_security_req,
+    avdt_scb_snd_security_rsp,
+    avdt_scb_snd_setconfig_req,
+    avdt_scb_snd_setconfig_rej,
+    avdt_scb_snd_setconfig_rsp,
+    avdt_scb_snd_tc_close,
+    avdt_scb_cb_err,
+    avdt_scb_cong_state,
+    avdt_scb_rej_state,
+    avdt_scb_rej_in_use,
+    avdt_scb_rej_not_in_use,
+    avdt_scb_set_remove,
+    avdt_scb_free_pkt,
+    avdt_scb_clr_pkt,
+    avdt_scb_chk_snd_pkt,
+    avdt_scb_tc_timer,
+    avdt_scb_clr_vars,
+    avdt_scb_dealloc
+};
+
+/* state table information */
+#define AVDT_SCB_ACTIONS            2       /* number of actions */
+#define AVDT_SCB_NEXT_STATE         2       /* position of next state */
+#define AVDT_SCB_NUM_COLS           3       /* number of columns in state tables */
+
+/* state table for idle state */
+const UINT8 avdt_scb_st_idle[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_DEALLOC,              AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_FREE_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_SND_SETCONFIG_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_SND_SETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_SND_SETCONFIG_REJ,    AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_HDL_SETCONFIG_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_REJ_NOT_IN_USE,       AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_HDL_SETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_HDL_SETCONFIG_REJ,    AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_OPEN_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_CONG_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_DROP_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_CLR_VARS,             AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST}
+};
+
+/* state table for configured state */
+const UINT8 avdt_scb_st_conf[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_SET_REMOVE,        AVDT_SCB_CONF_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_FREE_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_SND_GETCONFIG_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_SND_DELAY_RPT_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_SND_OPEN_REQ,         AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_SND_SECURITY_REQ,     AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_SND_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_SND_OPEN_RSP,         AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_SND_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_HDL_TC_CLOSE,      AVDT_SCB_IDLE_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_IN_USE,           AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_HDL_GETCONFIG_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_HDL_OPEN_CMD,         AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_HDL_SECURITY_CMD,     AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_HDL_DELAY_RPT_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_HDL_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_HDL_OPEN_RSP,         AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_HDL_ABORT_RSP,        AVDT_SCB_HDL_TC_CLOSE,      AVDT_SCB_IDLE_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_HDL_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_HDL_OPEN_REJ,         AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* TC_OPEN_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* TC_CONG_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_DROP_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_CONF_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST}
+};
+
+/* state table for opening state */
+const UINT8 avdt_scb_st_opening[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_SND_CLOSE_REQ,        AVDT_SCB_SET_REMOVE,        AVDT_SCB_CLOSING_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_FREE_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_SND_GETCONFIG_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_SND_DELAY_RPT_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_SND_CLOSE_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_SND_SECURITY_REQ,     AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_SND_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_SND_CLOSE_RSP,        AVDT_SCB_SND_TC_CLOSE,      AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_SND_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_SND_TC_CLOSE,      AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_HDL_GETCONFIG_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_HDL_CLOSE_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_HDL_SECURITY_CMD,     AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_HDL_DELAY_RPT_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_HDL_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_HDL_ABORT_RSP,     AVDT_SCB_CLOSING_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_HDL_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* TC_OPEN_EVT */           {AVDT_SCB_HDL_TC_OPEN,          AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_CONG_EVT */           {AVDT_SCB_CONG_STATE,           AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_DROP_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_OPENING_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST}
+};
+
+/* state table for open state */
+const UINT8 avdt_scb_st_open[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_SND_CLOSE_REQ,        AVDT_SCB_SET_REMOVE,        AVDT_SCB_CLOSING_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_FREE_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_SND_GETCONFIG_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_SND_DELAY_RPT_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_SND_CLOSE_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_SND_RECONFIG_REQ,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_SND_SECURITY_REQ,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_SND_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_SND_CLOSE_RSP,        AVDT_SCB_TC_TIMER,          AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_SND_RECONFIG_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_SND_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_TC_TIMER,          AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_HDL_GETCONFIG_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_HDL_START_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_HDL_CLOSE_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_HDL_RECONFIG_CMD,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_HDL_SECURITY_CMD,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_HDL_DELAY_RPT_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_HDL_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_HDL_RECONFIG_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_HDL_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+#if AVDT_REPORTING == TRUE
+/* TC_OPEN_EVT */           {AVDT_SCB_HDL_TC_OPEN_STO,      AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE_STO,     AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+#else
+/* TC_OPEN_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+#endif
+/* TC_CONG_EVT */           {AVDT_SCB_CONG_STATE,           AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_DROP_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_OPEN_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST}
+};
+
+/* state table for streaming state */
+const UINT8 avdt_scb_st_stream[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_SND_STREAM_CLOSE,     AVDT_SCB_SET_REMOVE,        AVDT_SCB_CLOSING_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_HDL_WRITE_REQ,        AVDT_SCB_CHK_SND_PKT,       AVDT_SCB_STREAM_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_SND_GETCONFIG_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_SND_DELAY_RPT_REQ,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_SND_STREAM_CLOSE,     AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_SND_SECURITY_REQ,     AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_SND_ABORT_REQ,        AVDT_SCB_CLR_PKT,           AVDT_SCB_CLOSING_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_SND_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_SND_CLOSE_RSP,        AVDT_SCB_TC_TIMER,          AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_SND_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_TC_TIMER,          AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_HDL_GETCONFIG_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_HDL_SUSPEND_CMD,      AVDT_SCB_CLR_PKT,           AVDT_SCB_OPEN_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_HDL_CLOSE_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_CLR_PKT,           AVDT_SCB_STREAM_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_HDL_SECURITY_CMD,     AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_HDL_DELAY_RPT_CMD,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_HDL_GETCONFIG_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_CLR_PKT,           AVDT_SCB_OPEN_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_HDL_RECONFIG_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_HDL_SECURITY_RSP,     AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* TC_OPEN_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_CONG_EVT */           {AVDT_SCB_CONG_STATE,           AVDT_SCB_CHK_SND_PKT,       AVDT_SCB_STREAM_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_HDL_PKT,              AVDT_SCB_IGNORE,            AVDT_SCB_STREAM_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST}
+};
+
+/* state table for closing state */
+const UINT8 avdt_scb_st_closing[][AVDT_SCB_NUM_COLS] = {
+/* Event                     Action 1                       Action 2                    Next state */
+/* API_REMOVE_EVT */        {AVDT_SCB_SET_REMOVE,           AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_WRITE_REQ_EVT */     {AVDT_SCB_FREE_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_GETCONFIG_REQ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_DELAY_RPT_REQ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_SETCONFIG_REQ_EVT */ {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_OPEN_REQ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_CLOSE_REQ_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_SECURITY_REQ_EVT */  {AVDT_SCB_CB_ERR,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_ABORT_REQ_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_GETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_CLOSE_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_SECURITY_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* API_ABORT_RSP_EVT */     {AVDT_SCB_SND_ABORT_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_GETCONFIG_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_OPEN_CMD_EVT */      {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_START_CMD_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SUSPEND_CMD_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_CLOSE_CMD_EVT */     {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_ABORT_CMD_EVT */     {AVDT_SCB_HDL_ABORT_CMD,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_RECONFIG_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SECURITY_CMD_EVT */  {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_DELAY_RPT_CMD_EVT */ {AVDT_SCB_REJ_STATE,            AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_DELAY_RPT_RSP_EVT */ {AVDT_SCB_HDL_DELAY_RPT_RSP,    AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_GETCONFIG_RSP_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_OPEN_RSP_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_START_RSP_EVT */     {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SUSPEND_RSP_EVT */   {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_CLOSE_RSP_EVT */     {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_HDL_CLOSE_RSP,     AVDT_SCB_CLOSING_ST},
+/* MSG_ABORT_RSP_EVT */     {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_HDL_ABORT_RSP,     AVDT_SCB_CLOSING_ST},
+/* MSG_RECONFIG_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SECURITY_RSP_EVT */  {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SETCONFIG_REJ_EVT */ {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_OPEN_REJ_EVT */      {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_START_REJ_EVT */     {AVDT_SCB_HDL_START_RSP,        AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* MSG_SUSPEND_REJ_EVT */   {AVDT_SCB_HDL_SUSPEND_RSP,      AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* TC_TOUT_EVT */           {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* TC_OPEN_EVT */           {AVDT_SCB_SND_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* TC_CLOSE_EVT */          {AVDT_SCB_HDL_TC_CLOSE,         AVDT_SCB_IGNORE,            AVDT_SCB_IDLE_ST},
+/* TC_CONG_EVT */           {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* TC_DATA_EVT */           {AVDT_SCB_DROP_PKT,             AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST},
+/* CC_CLOSE_EVT */          {AVDT_SCB_IGNORE,               AVDT_SCB_IGNORE,            AVDT_SCB_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tAVDT_SCB_ST_TBL)[AVDT_SCB_NUM_COLS];
+
+/* state table */
+const tAVDT_SCB_ST_TBL avdt_scb_st_tbl[] = {
+    avdt_scb_st_idle,
+    avdt_scb_st_conf,
+    avdt_scb_st_opening,
+    avdt_scb_st_open,
+    avdt_scb_st_stream,
+    avdt_scb_st_closing
+};
+
+
+/*******************************************************************************
+**
+** Function         avdt_scb_event
+**
+** Description      State machine event handling function for scb
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_event(tAVDT_SCB *p_scb, UINT8 event, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_SCB_ST_TBL    state_table;
+    UINT8               action;
+    int                 i;
+
+#if AVDT_DEBUG == TRUE
+    AVDT_TRACE_EVENT4("SCB hdl=%d event=%d/%s state=%s", avdt_scb_to_hdl(p_scb), event, avdt_scb_evt_str[event], avdt_scb_st_str[p_scb->state]);
+#endif
+    BTTRC_AVDT_SCB_EVENT(event, p_scb->state);
+
+    /* set current event */
+    p_scb->curr_evt = event;
+
+    /* look up the state table for the current state */
+    state_table = avdt_scb_st_tbl[p_scb->state];
+
+    /* set next state */
+    if (p_scb->state != state_table[event][AVDT_SCB_NEXT_STATE])
+        BTTRC_AVDT_SCB_STATE(state_table[event][AVDT_SCB_NEXT_STATE]);
+    p_scb->state = state_table[event][AVDT_SCB_NEXT_STATE];
+
+
+    /* execute action functions */
+    for (i = 0; i < AVDT_SCB_ACTIONS; i++)
+    {
+        if ((action = state_table[event][i]) != AVDT_SCB_IGNORE)
+        {
+            BTTRC_AVDT_SCB_ACTION(action);
+            (*avdt_cb.p_scb_act[action])(p_scb, p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_scb_init
+**
+** Description      Initialize stream control block module.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_init(void)
+{
+    memset(&avdt_cb.scb[0], 0, sizeof(tAVDT_SCB) * AVDT_NUM_SEPS);
+    avdt_cb.p_scb_act = (tAVDT_SCB_ACTION *) avdt_scb_action;
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_scb_alloc
+**
+** Description      Allocate a stream control block.
+**
+**
+** Returns          pointer to the scb, or NULL if none could be allocated.
+**
+*******************************************************************************/
+tAVDT_SCB *avdt_scb_alloc(tAVDT_CS *p_cs)
+{
+    tAVDT_SCB   *p_scb = &avdt_cb.scb[0];
+    int         i;
+
+    /* find available scb */
+    for (i = 0; i < AVDT_NUM_SEPS; i++, p_scb++)
+    {
+        if (!p_scb->allocated)
+        {
+            memset(p_scb,0,sizeof(tAVDT_SCB));
+            p_scb->allocated = TRUE;
+            p_scb->p_ccb = NULL;
+            memcpy(&p_scb->cs, p_cs, sizeof(tAVDT_CS));
+#if AVDT_MULTIPLEXING == TRUE
+            /* initialize fragments gueue */
+            GKI_init_q(&p_scb->frag_q);
+
+            if(p_cs->cfg.psc_mask & AVDT_PSC_MUX)
+            {
+                p_scb->cs.cfg.mux_tcid_media = avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb);
+#if AVDT_REPORTING == TRUE
+                if(p_cs->cfg.psc_mask & AVDT_PSC_REPORT)
+                {
+                    p_scb->cs.cfg.mux_tcid_report = avdt_ad_type_to_tcid(AVDT_CHAN_REPORT, p_scb);
+                }
+#endif
+            }
+#endif
+            p_scb->timer_entry.param = (UINT32) p_scb;
+            AVDT_TRACE_DEBUG2("avdt_scb_alloc hdl=%d, psc_mask:0x%x", i+1, p_cs->cfg.psc_mask);
+            break;
+        }
+    }
+
+    if (i == AVDT_NUM_SEPS)
+    {
+        /* out of ccbs */
+        p_scb = NULL;
+        AVDT_TRACE_WARNING0("Out of scbs");
+    }
+
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_dealloc
+**
+** Description      Deallocate a stream control block.
+**
+**
+** Returns          void.
+**
+*******************************************************************************/
+void avdt_scb_dealloc(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+#if AVDT_MULTIPLEXING == TRUE
+    void *p_buf;
+#endif
+
+    AVDT_TRACE_DEBUG1("avdt_scb_dealloc hdl=%d", avdt_scb_to_hdl(p_scb));
+    btu_stop_timer(&p_scb->timer_entry);
+
+#if AVDT_MULTIPLEXING == TRUE
+    /* free fragments we're holding, if any; it shouldn't happen */
+    while ((p_buf = GKI_dequeue (&p_scb->frag_q)) != NULL)
+        GKI_freebuf(p_buf);
+#endif
+
+    memset(p_scb, 0, sizeof(tAVDT_SCB));
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_to_hdl
+**
+** Description      Given a pointer to an scb, return its handle (or seid).
+**
+**
+** Returns          Index of scb.
+**
+*******************************************************************************/
+UINT8 avdt_scb_to_hdl(tAVDT_SCB *p_scb)
+{
+    return (UINT8) (p_scb - avdt_cb.scb + 1);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_by_hdl
+**
+** Description      Given an scb handle (or seid), return a pointer to the scb.
+**
+**
+** Returns          Pointer to scb or NULL if index is out of range or scb
+**                  is not allocated.
+**
+*******************************************************************************/
+tAVDT_SCB *avdt_scb_by_hdl(UINT8 hdl)
+{
+    tAVDT_SCB   *p_scb;
+
+    /* verify index */
+    if ((hdl > 0) && (hdl <= AVDT_NUM_SEPS))
+    {
+        p_scb = &avdt_cb.scb[hdl - 1];
+
+        /* verify scb is allocated */
+        if (!p_scb->allocated)
+        {
+            p_scb = NULL;
+            AVDT_TRACE_WARNING1("scb hdl %d not allocated", hdl);
+        }
+    }
+    else
+    {
+        p_scb = NULL;
+        AVDT_TRACE_WARNING1("scb hdl %d out of range", hdl);
+    }
+    return p_scb;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_verify
+**
+** Description      Verify the condition of a list of scbs.
+**
+**
+** Returns          SEID that failed, or 0 if success.
+**
+*******************************************************************************/
+UINT8 avdt_scb_verify(tAVDT_CCB *p_ccb, UINT8 state, UINT8 *p_seid, UINT16 num_seid, UINT8 *p_err_code)
+{
+    int         i;
+    tAVDT_SCB   *p_scb;
+    UINT8       nsc_mask;
+    UINT8       chk_state;
+    UINT8       ret = 0;
+
+    AVDT_TRACE_DEBUG1("avdt_scb_verify state %d", state);
+    /* set nonsupported command mask */
+    /* translate public state into private state */
+    nsc_mask = 0;
+    chk_state = AVDT_SCB_STREAM_ST;
+    switch(state)
+    {
+    case AVDT_VERIFY_SUSPEND:
+        nsc_mask = AVDT_NSC_SUSPEND;
+        break;
+    case AVDT_VERIFY_OPEN:
+    case AVDT_VERIFY_START:
+        chk_state = AVDT_SCB_OPEN_ST;
+        break;
+    }
+
+    /* verify every scb */
+    for (i = 0; i < num_seid; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p_seid[i])) == NULL)
+        {
+            *p_err_code = AVDT_ERR_BAD_STATE;
+            break;
+        }
+        else if ((p_scb->state != chk_state) || (p_scb->p_ccb != p_ccb))
+        {
+            *p_err_code = AVDT_ERR_BAD_STATE;
+            break;
+        }
+        else if (p_scb->cs.nsc_mask & nsc_mask)
+        {
+            *p_err_code = AVDT_ERR_NSC;
+            break;
+        }
+    }
+
+    if (i != num_seid)
+    {
+        ret = p_seid[i];
+    }
+    AVDT_TRACE_DEBUG3("avdt_scb_verify state %d, nsc_mask0x%x, ret: %d",
+        chk_state, nsc_mask, ret);
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_peer_seid_list
+**
+** Description      Given a list of SCB handles, return a list of peer SEIDs
+**                  for the handles, copied in place into the struct passed in.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_peer_seid_list(tAVDT_MULTI *p_multi)
+{
+    int         i;
+    tAVDT_SCB   *p_scb;
+
+    for (i = 0; i < p_multi->num_seps; i++)
+    {
+        if ((p_scb = avdt_scb_by_hdl(p_multi->seid_list[i])) != NULL)
+        {
+            p_multi->seid_list[i] = p_scb->peer_seid;
+        }
+    }
+}
+
diff --git a/stack/avdt/avdt_scb_act.c b/stack/avdt/avdt_scb_act.c
new file mode 100644
index 0000000..c2ced74
--- /dev/null
+++ b/stack/avdt/avdt_scb_act.c
@@ -0,0 +1,2124 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the action functions associated with the stream
+ *  control block state machine.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "data_types.h"
+#include "bt_target.h"
+#include "avdt_api.h"
+#include "avdtc_api.h"
+#include "avdt_int.h"
+#include "gki.h"
+#include "btu.h"
+
+/* This table is used to lookup the callback event that matches a particular
+** state machine API request event.  Note that state machine API request
+** events are at the beginning of the event list starting at zero, thus
+** allowing for this table.
+*/
+const UINT8 avdt_scb_cback_evt[] = {
+    0,                          /* API_REMOVE_EVT (no event) */
+    AVDT_WRITE_CFM_EVT,         /* API_WRITE_REQ_EVT */
+    0,                          /* API_GETCONFIG_REQ_EVT (no event) */
+    0,                          /* API_DELAY_RPT_REQ_EVT (no event) */
+    AVDT_OPEN_CFM_EVT,          /* API_SETCONFIG_REQ_EVT */
+    AVDT_OPEN_CFM_EVT,          /* API_OPEN_REQ_EVT */
+    AVDT_CLOSE_CFM_EVT,         /* API_CLOSE_REQ_EVT */
+    AVDT_RECONFIG_CFM_EVT,      /* API_RECONFIG_REQ_EVT */
+    AVDT_SECURITY_CFM_EVT,      /* API_SECURITY_REQ_EVT */
+    0                           /* API_ABORT_REQ_EVT (no event) */
+};
+
+/* This table is used to look up the callback event based on the signaling
+** role when the stream is closed.
+*/
+const UINT8 avdt_scb_role_evt[] = {
+    AVDT_CLOSE_IND_EVT,         /* AVDT_CLOSE_ACP */
+    AVDT_CLOSE_CFM_EVT,         /* AVDT_CLOSE_INT */
+    AVDT_CLOSE_IND_EVT,         /* AVDT_OPEN_ACP */
+    AVDT_OPEN_CFM_EVT           /* AVDT_OPEN_INT */
+};
+
+/*******************************************************************************
+**
+** Function         avdt_scb_gen_ssrc
+**
+** Description      This function generates a SSRC number unique to the stream.
+**
+** Returns          SSRC value.
+**
+*******************************************************************************/
+UINT32 avdt_scb_gen_ssrc(tAVDT_SCB *p_scb)
+{
+    /* combine the value of the media type and codec type of the SCB */
+    return ((UINT32)(p_scb->cs.cfg.codec_info[1] | p_scb->cs.cfg.codec_info[2]));
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_abort_cmd
+**
+** Description      This function sends the SCB an AVDT_SCB_API_ABORT_RSP_EVT
+**                  to initiate sending of an abort response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_abort_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->role = AVDT_CLOSE_ACP;
+    avdt_scb_event(p_scb, AVDT_SCB_API_ABORT_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_abort_rsp
+**
+** Description      This function is an empty function; it serves as a
+**                  placeholder for a conformance API action function.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_abort_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_close_cmd
+**
+** Description      This function sends the SCB an AVDT_SCB_API_CLOSE_RSP_EVT
+**                  to initiate sending of a close response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_close_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->role = AVDT_CLOSE_ACP;
+    avdt_scb_event(p_scb, AVDT_SCB_API_CLOSE_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_close_rsp
+**
+** Description      This function sets the close_code variable to the error
+**                  code returned in the close response.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_close_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->close_code = p_data->msg.hdr.err_code;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_getconfig_cmd
+**
+** Description      This function retrieves the configuration parameters of
+**                  the SCB and sends the SCB an AVDT_SCB_API_GETCONFIG_RSP_EVT
+**                  to initiate sending of a get configuration response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_getconfig_cmd(tAVDT_SCB *p_scb,tAVDT_SCB_EVT *p_data)
+{
+    p_data->msg.svccap.p_cfg = &p_scb->curr_cfg;
+
+    avdt_scb_event(p_scb, AVDT_SCB_API_GETCONFIG_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_getconfig_rsp
+**
+** Description      This function is an empty function; it serves as a
+**                  placeholder for a conformance API action function.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_getconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_open_cmd
+**
+** Description      This function sends the SCB an AVDT_SCB_API_OPEN_RSP_EVT
+**                  to initiate sending of an open response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_open_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    avdt_scb_event(p_scb, AVDT_SCB_API_OPEN_RSP_EVT, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_open_rej
+**
+** Description      This function calls the application callback function
+**                  indicating the open request has failed.  It initializes
+**                  certain SCB variables and sends a AVDT_CCB_UL_CLOSE_EVT
+**                  to the CCB.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_open_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* do exactly same as setconfig reject */
+    avdt_scb_hdl_setconfig_rej(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_open_rsp
+**
+** Description      This function calls avdt_ad_open_req() to initiate
+**                  connection of the transport channel for this stream.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_open_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* initiate opening of trans channels for this SEID */
+    p_scb->role = AVDT_OPEN_INT;
+    avdt_ad_open_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb, AVDT_INT);
+
+    /* start tc connect timer */
+    btu_start_timer(&p_scb->timer_entry, BTU_TTYPE_AVDT_SCB_TC, AVDT_SCB_TC_CONN_TOUT);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_pkt_no_frag
+**
+** Description
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_pkt_no_frag(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    UINT8   *p, *p_start;
+    UINT8   o_v, o_p, o_x, o_cc;
+    UINT8   m_pt;
+    UINT8   marker;
+    UINT16  seq;
+    UINT32  time_stamp;
+    UINT32  ssrc;
+    UINT16  offset;
+    UINT16  ex_len;
+    UINT8   pad_len = 0;
+
+    p = p_start = (UINT8 *)(p_data->p_pkt + 1) + p_data->p_pkt->offset;
+
+    /* parse media packet header */
+    AVDT_MSG_PRS_OCTET1(p, o_v, o_p, o_x, o_cc);
+    AVDT_MSG_PRS_M_PT(p, m_pt, marker);
+    BE_STREAM_TO_UINT16(seq, p);
+    BE_STREAM_TO_UINT32(time_stamp, p);
+    BE_STREAM_TO_UINT32(ssrc, p);
+
+    /* skip over any csrc's in packet */
+    p += o_cc * 4;
+
+    /* check for and skip over extension header */
+    if (o_x)
+    {
+        p += 2;
+        BE_STREAM_TO_UINT16(ex_len, p);
+        p += ex_len * 4;
+    }
+
+    /* save our new offset */
+    offset = (UINT16) (p - p_start);
+
+    /* adjust length for any padding at end of packet */
+    if (o_p)
+    {
+        /* padding length in last byte of packet */
+        pad_len =  *(p_start + p_data->p_pkt->len);
+    }
+
+    /* do sanity check */
+    if ((offset > p_data->p_pkt->len) || ((pad_len + offset) > p_data->p_pkt->len))
+    {
+        AVDT_TRACE_WARNING0("Got bad media packet");
+        GKI_freebuf(p_data->p_pkt);
+    }
+    /* adjust offset and length and send it up */
+    else
+    {
+        p_data->p_pkt->len -= (offset + pad_len);
+        p_data->p_pkt->offset += offset;
+
+        if (p_scb->cs.p_data_cback != NULL)
+        {
+            /* report sequence number */
+            p_data->p_pkt->layer_specific = seq;
+            (*p_scb->cs.p_data_cback)(avdt_scb_to_hdl(p_scb), p_data->p_pkt,
+                time_stamp, (UINT8)(m_pt | (marker<<7)));
+        }
+        else
+        {
+#if AVDT_MULTIPLEXING == TRUE
+            if ((p_scb->cs.p_media_cback != NULL)
+             && (p_scb->p_media_buf != NULL)
+             && (p_scb->media_buf_len > p_data->p_pkt->len))
+            {
+                /* media buffer enough length is assigned by application. Lets use it*/
+                memcpy(p_scb->p_media_buf,(UINT8*)(p_data->p_pkt + 1) + p_data->p_pkt->offset,
+                    p_data->p_pkt->len);
+                (*p_scb->cs.p_media_cback)(avdt_scb_to_hdl(p_scb),p_scb->p_media_buf,
+                    p_scb->media_buf_len,time_stamp,seq,m_pt,marker);
+            }
+#endif
+            GKI_freebuf(p_data->p_pkt);
+        }
+    }
+}
+
+#if AVDT_REPORTING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_report
+**
+** Description
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+UINT8 * avdt_scb_hdl_report(tAVDT_SCB *p_scb, UINT8 *p, UINT16 len)
+{
+    UINT16  result = AVDT_SUCCESS;
+    UINT8   *p_start = p;
+    UINT32  ssrc;
+    UINT8   o_v, o_p, o_cc;
+    UINT16  pkt_len;
+    AVDT_REPORT_TYPE    pt;
+    tAVDT_REPORT_DATA   report, *p_rpt;
+
+    AVDT_TRACE_DEBUG0( "avdt_scb_hdl_report");
+    if(p_scb->cs.p_report_cback)
+    {
+        p_rpt = &report;
+        /* parse report packet header */
+        AVDT_MSG_PRS_RPT_OCTET1(p, o_v, o_p, o_cc);
+        pt = *p++;
+        BE_STREAM_TO_UINT16(pkt_len, p);
+        BE_STREAM_TO_UINT32(ssrc, p);
+
+        switch(pt)
+        {
+        case AVDT_RTCP_PT_SR:   /* the packet type - SR (Sender Report) */
+            BE_STREAM_TO_UINT32(report.sr.ntp_sec, p);
+            BE_STREAM_TO_UINT32(report.sr.ntp_frac, p);
+            BE_STREAM_TO_UINT32(report.sr.rtp_time, p);
+            BE_STREAM_TO_UINT32(report.sr.pkt_count, p);
+            BE_STREAM_TO_UINT32(report.sr.octet_count, p);
+            break;
+
+        case AVDT_RTCP_PT_RR:   /* the packet type - RR (Receiver Report) */
+            report.rr.frag_lost = *p;
+            BE_STREAM_TO_UINT32(report.rr.packet_lost, p);
+            report.rr.packet_lost &= 0xFFFFFF;
+            BE_STREAM_TO_UINT32(report.rr.seq_num_rcvd, p);
+            BE_STREAM_TO_UINT32(report.rr.jitter, p);
+            BE_STREAM_TO_UINT32(report.rr.lsr, p);
+            BE_STREAM_TO_UINT32(report.rr.dlsr, p);
+            break;
+
+        case AVDT_RTCP_PT_SDES: /* the packet type - SDES (Source Description) */
+            if(*p == AVDT_RTCP_SDES_CNAME)
+            {
+                p_rpt = (tAVDT_REPORT_DATA *)(p+2);
+            }
+            else
+            {
+                AVDT_TRACE_WARNING5( " - SDES SSRC=0x%08x sc=%d %d len=%d %s",
+                    ssrc, o_cc, *p, *(p+1), p+2);
+                result = AVDT_BUSY;
+            }
+            break;
+
+        default:
+            AVDT_TRACE_ERROR1( "Bad Report pkt - packet type: %d", pt);
+            result = AVDT_BAD_PARAMS;
+        }
+
+        if(result == AVDT_SUCCESS)
+            (*p_scb->cs.p_report_cback)(avdt_scb_to_hdl(p_scb), pt, p_rpt);
+
+    }
+    p_start += len;
+    return p_start;
+}
+#endif
+
+#if AVDT_MULTIPLEXING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_pkt_frag
+**
+** Description
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_pkt_frag(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* Fields of Adaptation Layer Header */
+    UINT8   al_tsid,al_frag,al_lcode;
+    UINT16  al_len;
+    /* media header fields */
+    UINT8   o_v, o_p, o_x, o_cc;
+    UINT8   m_pt;
+    UINT8   marker;
+    UINT16  seq;
+    UINT32  time_stamp;
+    UINT32  ssrc;
+    UINT16  ex_len;
+    UINT8   pad_len;
+    /* other variables */
+    UINT8   *p; /* current pointer */
+    UINT8   *p_end; /* end of all packet */
+    UINT8   *p_payload; /* pointer to media fragment payload in the buffer */
+    UINT32  payload_len; /* payload length */
+    UINT16  frag_len; /* fragment length */
+
+    p = (UINT8 *)(p_data->p_pkt + 1) + p_data->p_pkt->offset;
+    p_end = p + p_data->p_pkt->len;
+    /* parse all fragments */
+    while(p < p_end)
+    {
+        if (p_end - p < 4) /* length check. maximum length of AL header = 4 */
+        {
+            AVDT_TRACE_WARNING2("p_end: 0x%x - p:0x%x < 4", p_end, p);
+            break;
+        }
+
+        /* parse first byte */
+        al_tsid = (*p)>>3;
+        al_frag = ( (*p) >> 2 ) & 0x01;
+        al_lcode = (*p++) & AVDT_ALH_LCODE_MASK;
+
+        /* in case of TSID=00000, a second AL header byte, before the length field,
+        ** is expected and contains the actual TSID, aligned with MSB */
+        if(al_tsid == 0)
+            al_tsid = *p++;
+
+        /* get remaining media length on base of lcode */
+        switch(al_lcode)
+        {
+        case AVDT_ALH_LCODE_NONE:  /* No length field present. Take length from l2cap */
+            al_len = (UINT16)(p_end - p);
+            break;
+        case AVDT_ALH_LCODE_16BIT:  /* 16 bit length field */
+            BE_STREAM_TO_UINT16(al_len, p);
+            break;
+        case AVDT_ALH_LCODE_9BITM0:  /* 9 bit length field, MSB = 0, 8 LSBs in 1 octet following */
+            al_len = *p++;
+            break;
+        default:    /* 9 bit length field, MSB = 1, 8 LSBs in 1 octet following */
+            al_len =(UINT16)*p++ + 0x100;
+        }
+
+        /* max fragment length */
+        frag_len = (UINT16)(p_end - p);
+        /* if it isn't last fragment */
+        if(frag_len >= al_len)
+            frag_len = al_len;
+
+        /* check TSID corresponds to config */
+        if (al_tsid != p_scb->curr_cfg.mux_tsid_media)
+        {
+#if AVDT_REPORTING == TRUE
+            if((p_scb->curr_cfg.psc_mask & AVDT_PSC_REPORT) &&
+                (al_tsid == p_scb->curr_cfg.mux_tsid_report))
+            {
+                /* parse reporting packet */
+                p = avdt_scb_hdl_report(p_scb, p, frag_len);
+                continue;
+            }
+            else
+#endif
+            {
+                AVDT_TRACE_WARNING2("bad tsid: %d, mux_tsid_media:%d", al_tsid, p_scb->curr_cfg.mux_tsid_media);
+                break;
+            }
+        }
+        /* check are buffer for assembling and related callback set */
+        else if ((p_scb->p_media_buf == NULL) || (p_scb->cs.p_media_cback == NULL))
+        {
+            AVDT_TRACE_WARNING0("NULL p_media_buf or p_media_cback");
+            break;
+        }
+
+
+        /* it is media fragment beginning */
+        if(!al_frag) /* is it first fragment of original media packet */
+        {
+            AVDT_TRACE_DEBUG2("al:%d media:%d",
+                al_len, p_scb->media_buf_len);
+
+            p_scb->frag_off = 0;
+            p_scb->frag_org_len = al_len; /* total length of original media packet */
+            /* length check: minimum length of media header is 12 */
+            if (p_scb->frag_org_len < 12)
+            {
+                AVDT_TRACE_WARNING1("bad al_len: %d(<12)", al_len);
+                break;
+            }
+            /* check that data fit into buffer */
+            if (al_len > p_scb->media_buf_len)
+            {
+                AVDT_TRACE_WARNING2("bad al_len: %d(>%d)", al_len, p_scb->media_buf_len);
+                break;
+            }
+            /* make sure it is the last fragment in l2cap packet */
+            if (p + al_len < p_end)
+            {
+                AVDT_TRACE_WARNING2("bad al_len: %d(>%d)", al_len, p_scb->media_buf_len);
+                break;
+            }
+        }
+        else
+        {
+            AVDT_TRACE_DEBUG4("al:%d media:%d frag_org_len:%d frag_off:%d",
+                al_len, p_scb->media_buf_len, p_scb->frag_org_len, p_scb->frag_off);
+
+            /* check that remaining length from AL header equals to original len - length of already received fragments */
+            if(al_len != p_scb->frag_org_len - p_scb->frag_off)
+            {
+                AVDT_TRACE_WARNING4("al_len:%d != (frag_org_len:%d - frag_off:%d) %d",
+                    al_len, p_scb->frag_org_len, p_scb->frag_off,
+                    (p_scb->frag_org_len- p_scb->frag_off));
+                break;
+            }
+
+            /* do sanity check */
+            if (p_scb->frag_off == 0)
+            {
+                AVDT_TRACE_WARNING0("frag_off=0");
+                break;
+            }
+        }
+        /* do common sanity check */
+        if((p_scb->frag_org_len <= p_scb->frag_off) || (p_scb->frag_org_len >= p_scb->media_buf_len))
+        {
+            AVDT_TRACE_WARNING3("common sanity frag_off:%d frag_org_len:%d media_buf_len:%d",
+                p_scb->frag_off, p_scb->frag_org_len, p_scb->media_buf_len);
+            break;
+        }
+
+        AVDT_TRACE_DEBUG4("Received fragment org_len=%d off=%d al_len=%d frag_len=%d",
+            p_scb->frag_org_len, p_scb->frag_off, al_len, frag_len);
+
+        /* copy fragment into buffer */
+        memcpy(p_scb->p_media_buf + p_scb->frag_off, p, frag_len);
+        p_scb->frag_off += frag_len;
+        /* move to the next fragment */
+        p += frag_len;
+        /* if it is last fragment in original media packet then process total media pocket */
+        if(p_scb->frag_off == p_scb->frag_org_len)
+        {
+            p_payload = p_scb->p_media_buf;
+
+            /* media header */
+            AVDT_MSG_PRS_OCTET1(p_payload, o_v, o_p, o_x, o_cc);
+            AVDT_MSG_PRS_M_PT(p_payload, m_pt, marker);
+            BE_STREAM_TO_UINT16(seq, p_payload);
+            BE_STREAM_TO_UINT32(time_stamp, p_payload);
+            BE_STREAM_TO_UINT32(ssrc, p_payload);
+
+            /* skip over any csrc's in packet */
+            p_payload += o_cc * 4;
+
+            /* check for and skip over extension header */
+            if (o_x)
+            {
+                if(p_scb->p_media_buf + p_scb->frag_off - p_payload < 4)
+                {
+                    AVDT_TRACE_WARNING3("length check frag_off:%d p_media_buf:%d p_payload:%d",
+                        p_scb->frag_off, p_scb->p_media_buf, p_payload);
+                    break;/* length check */
+                }
+                p_payload += 2;
+                BE_STREAM_TO_UINT16(ex_len, p_payload);
+                p_payload += ex_len * 4;
+            }
+
+            if(p_payload >= p_scb->p_media_buf + p_scb->frag_off)
+            {
+                AVDT_TRACE_WARNING3("length check2 frag_off:%d p_media_buf:%d p_payload:%d",
+                    p_scb->frag_off, p_scb->p_media_buf, p_payload);
+                break;/* length check */
+            }
+
+            /* adjust length for any padding at end of packet */
+            if (o_p)
+            {
+                /* padding length in last byte of packet */
+                pad_len =  *(p_scb->p_media_buf + p_scb->frag_off - 1);
+            }
+            else
+                pad_len =  0;
+            /* payload length */
+            payload_len = (UINT32)(p_scb->p_media_buf + p_scb->frag_off - pad_len - p_payload);
+
+            AVDT_TRACE_DEBUG2("Received last fragment header=%d len=%d",
+                p_payload - p_scb->p_media_buf,payload_len);
+
+            /* send total media packet up */
+            if (p_scb->cs.p_media_cback != NULL)
+            {
+                (*p_scb->cs.p_media_cback)(avdt_scb_to_hdl(p_scb), p_payload,
+                                           payload_len, time_stamp, seq, m_pt, marker);
+            }
+        }
+    } /* while(p < p_end) */
+
+    if(p < p_end)
+    {
+        AVDT_TRACE_WARNING0("*** Got bad media packet");
+    }
+    GKI_freebuf(p_data->p_pkt);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_pkt
+**
+** Description
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+#if AVDT_REPORTING == TRUE
+    UINT8 *p;
+#endif
+
+#if AVDT_MULTIPLEXING == TRUE
+    /* select right function in dependance of is fragmentation supported or not */
+    if( 0 != (p_scb->curr_cfg.psc_mask & AVDT_PSC_MUX))
+    {
+        avdt_scb_hdl_pkt_frag(p_scb, p_data);
+    }
+    else
+#endif
+#if AVDT_REPORTING == TRUE
+    if(p_data->p_pkt->layer_specific == AVDT_CHAN_REPORT)
+    {
+        p = (UINT8 *)(p_data->p_pkt + 1) + p_data->p_pkt->offset;
+        avdt_scb_hdl_report(p_scb, p, p_data->p_pkt->len);
+        GKI_freebuf(p_data->p_pkt);
+    }
+    else
+#endif
+        avdt_scb_hdl_pkt_no_frag(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_drop_pkt
+**
+** Description      Drop an incoming media packet.  This function is called if
+**                  a media packet is received in any state besides streaming.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_drop_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    GKI_freebuf(p_data->p_pkt);
+    AVDT_TRACE_WARNING0("Dropped incoming media packet");
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_reconfig_cmd
+**
+** Description      This function calls the application callback function
+**                  with a reconfiguration indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_reconfig_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* if command not supported */
+    if (p_scb->cs.nsc_mask & AVDT_NSC_RECONFIG)
+    {
+        /* send reject */
+        p_data->msg.hdr.err_code = AVDT_ERR_NSC;
+        p_data->msg.hdr.err_param = 0;
+        avdt_scb_event(p_scb, AVDT_SCB_API_RECONFIG_RSP_EVT, p_data);
+    }
+    else
+    {
+        /* store requested configuration */
+        memcpy(&p_scb->req_cfg, p_data->msg.reconfig_cmd.p_cfg, sizeof(tAVDT_CFG));
+
+        /* call application callback */
+        (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                                  NULL,
+                                  AVDT_RECONFIG_IND_EVT,
+                                  (tAVDT_CTRL *) &p_data->msg.reconfig_cmd);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_reconfig_rsp
+**
+** Description      This function calls the application callback function
+**                  with a reconfiguration confirm.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_reconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    if (p_data->msg.hdr.err_code == 0)
+    {
+        /* store new configuration */
+        if (p_scb->req_cfg.num_codec > 0)
+        {
+            p_scb->curr_cfg.num_codec = p_scb->req_cfg.num_codec;
+            memcpy(p_scb->curr_cfg.codec_info, p_scb->req_cfg.codec_info, AVDT_CODEC_SIZE);
+        }
+        if (p_scb->req_cfg.num_protect > 0)
+        {
+            p_scb->curr_cfg.num_protect = p_scb->req_cfg.num_protect;
+            memcpy(p_scb->curr_cfg.protect_info, p_scb->req_cfg.protect_info, AVDT_PROTECT_SIZE);
+        }
+    }
+
+    p_data->msg.svccap.p_cfg = &p_scb->curr_cfg;
+
+    /* call application callback */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              NULL,
+                              AVDT_RECONFIG_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.svccap);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_security_cmd
+**
+** Description      This function calls the application callback with a
+**                  security indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_security_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* if command not supported */
+    if (p_scb->cs.nsc_mask & AVDT_NSC_SECURITY)
+    {
+        /* send reject */
+        p_data->msg.hdr.err_code = AVDT_ERR_NSC;
+        avdt_scb_event(p_scb, AVDT_SCB_API_SECURITY_RSP_EVT, p_data);
+    }
+    else
+    {
+        /* call application callback */
+        (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                                  NULL,
+                                  AVDT_SECURITY_IND_EVT,
+                                  (tAVDT_CTRL *) &p_data->msg.security_cmd);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_security_rsp
+**
+** Description      This function calls the application callback with a
+**                  security confirm.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_security_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* call application callback */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              NULL,
+                              AVDT_SECURITY_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.security_cmd);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_setconfig_cmd
+**
+** Description      This function marks the SCB as in use and copies the
+**                  configuration and peer SEID to the SCB.  It then calls
+**                  the application callback with a configuration indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_setconfig_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CFG *p_cfg;
+
+    if (!p_scb->in_use)
+    {
+        p_cfg = p_data->msg.config_cmd.p_cfg;
+        if(p_scb->cs.cfg.codec_info[AVDT_CODEC_TYPE_INDEX] == p_cfg->codec_info[AVDT_CODEC_TYPE_INDEX])
+        {
+            /* set sep as in use */
+            p_scb->in_use = TRUE;
+
+            /* copy info to scb */
+            p_scb->p_ccb = avdt_ccb_by_idx(p_data->msg.config_cmd.hdr.ccb_idx);
+            p_scb->peer_seid = p_data->msg.config_cmd.int_seid;
+            memcpy(&p_scb->req_cfg, p_cfg, sizeof(tAVDT_CFG));
+            /* call app callback */
+            (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                                      p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                                      AVDT_CONFIG_IND_EVT,
+                                      (tAVDT_CTRL *) &p_data->msg.config_cmd);
+        }
+        else
+        {
+            p_data->msg.hdr.err_code = AVDT_ERR_UNSUP_CFG;
+            p_data->msg.hdr.err_param = 0;
+            avdt_msg_send_rej(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx),
+                              p_data->msg.hdr.sig_id, &p_data->msg);
+        }
+    }
+    else
+    {
+        avdt_scb_rej_in_use(p_scb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_setconfig_rej
+**
+** Description      This function marks the SCB as not in use and calls the
+**                  application callback with an open confirm indicating failure.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_setconfig_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* clear scb variables */
+    avdt_scb_clr_vars(p_scb, p_data);
+
+    /* tell ccb we're done with signaling channel */
+    avdt_ccb_event(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx), AVDT_CCB_UL_CLOSE_EVT, NULL);
+
+    /* call application callback */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              NULL,
+                              AVDT_OPEN_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_setconfig_rsp
+**
+** Description      This function sends the SCB an AVDT_SCB_API_OPEN_REQ_EVT
+**                  to initiate sending of an open command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_setconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_EVT_HDR   single;
+
+    if (p_scb->p_ccb != NULL)
+    {
+        /* save configuration */
+        memcpy(&p_scb->curr_cfg, &p_scb->req_cfg, sizeof(tAVDT_CFG));
+
+        /* initiate open */
+        single.seid = p_scb->peer_seid;
+        avdt_scb_event(p_scb, AVDT_SCB_API_OPEN_REQ_EVT, (tAVDT_SCB_EVT *) &single);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_start_cmd
+**
+** Description      This function calls the application callback with a
+**                  start indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_start_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_START_IND_EVT,
+                              NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_start_rsp
+**
+** Description      This function calls the application callback with a
+**                  start confirm.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_start_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_START_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_suspend_cmd
+**
+** Description      This function calls the application callback with a suspend
+**                  indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_suspend_cmd(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_SUSPEND_IND_EVT,
+                              NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_suspend_rsp
+**
+** Description      This function calls the application callback with a suspend
+**                  confirm.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_suspend_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_SUSPEND_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_tc_close
+**
+** Description      This function is called when the transport channel is
+**                  closed.  It marks the SCB as not in use and
+**                  initializes certain SCB parameters.  It then sends
+**                  an AVDT_CCB_UL_CLOSE_EVT to the CCB if the SCB
+**                  initiated the close.  It then checks to see if the SCB
+**                  is to be removed.  If it is it deallocates the SCB.  Finally,
+**                  it calls the application callback with a close indication.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_tc_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    UINT8               hdl = avdt_scb_to_hdl(p_scb);
+    tAVDT_CTRL_CBACK    *p_ctrl_cback = p_scb->cs.p_ctrl_cback;
+    tAVDT_CTRL          avdt_ctrl;
+    UINT8               event;
+    tAVDT_CCB           *p_ccb = p_scb->p_ccb;
+    BD_ADDR remote_addr;
+
+
+    memcpy (remote_addr, p_ccb->peer_addr, BD_ADDR_LEN);
+
+    /* set up hdr */
+    avdt_ctrl.hdr.err_code = p_scb->close_code;
+
+    /* clear sep variables */
+    avdt_scb_clr_vars(p_scb, p_data);
+    p_scb->media_seq = 0;
+    p_scb->cong = FALSE;
+
+    /* free pkt we're holding, if any */
+    if (p_scb->p_pkt != NULL)
+    {
+        GKI_freebuf(p_scb->p_pkt);
+        p_scb->p_pkt = NULL;
+    }
+
+    /* stop transport channel timer */
+    btu_stop_timer(&p_scb->timer_entry);
+
+    if ((p_scb->role == AVDT_CLOSE_INT) || (p_scb->role == AVDT_OPEN_INT))
+    {
+        /* tell ccb we're done with signaling channel */
+        avdt_ccb_event(p_ccb, AVDT_CCB_UL_CLOSE_EVT, NULL);
+    }
+    event = (p_scb->role == AVDT_CLOSE_INT) ? AVDT_CLOSE_CFM_EVT : AVDT_CLOSE_IND_EVT;
+    p_scb->role = AVDT_CLOSE_ACP;
+
+    if (p_scb->remove)
+    {
+        avdt_scb_dealloc(p_scb, NULL);
+    }
+
+    /* call app callback */
+    (*p_ctrl_cback)(hdl, remote_addr, event, &avdt_ctrl);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_delay_rpt_req
+**
+** Description      This function calls the application callback with a delay
+**                  report.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_delay_rpt_req (tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_DELAY_RPT, (tAVDT_MSG *) &p_data->apidelay);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_delay_rpt_cmd
+**
+** Description      This function calls the application callback with a delay
+**                  report.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_delay_rpt_cmd (tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_DELAY_REPORT_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.hdr);
+
+    if (p_scb->p_ccb)
+        avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_DELAY_RPT, &p_data->msg);
+    else
+        avdt_scb_rej_not_in_use(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_delay_rpt_rsp
+**
+** Description      This function calls the application callback with a delay
+**                  report.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_delay_rpt_rsp (tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_DELAY_REPORT_CFM_EVT,
+                              (tAVDT_CTRL *) &p_data->msg.hdr);
+}
+
+#if AVDT_REPORTING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_tc_close_sto
+**
+** Description      This function is called when a channel is closed in OPEN
+**                  state.  Check the channel type and process accordingly.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_tc_close_sto(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL          avdt_ctrl;
+    /* AVDT_CHAN_SIG does not visit this action */
+    if(p_data && p_data->close.type != AVDT_CHAN_MEDIA)
+    {
+        /* it's reporting or recovery channel,
+         * the channel close in open state means the peer does not support it */
+        if(p_data->close.old_tc_state == AVDT_AD_ST_OPEN)
+        {
+            avdt_ctrl.hdr.err_code = 0;
+            avdt_ctrl.hdr.err_param = 0;
+            /* call app callback */
+            (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                                      p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                                      AVDT_REPORT_DISCONN_EVT, &avdt_ctrl);
+        }
+    }
+    else
+    {
+        /* must be in OPEN state. need to go back to idle */
+        avdt_scb_event(p_scb, AVDT_SCB_MSG_ABORT_RSP_EVT, NULL);
+        avdt_scb_hdl_tc_close(p_scb, p_data);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_tc_open
+**
+** Description      This function is called when the transport channel is
+**                  opened while in the opening state.  It calls the
+**                  application callback with an open indication or open
+**                  confirm depending on who initiated the open procedure.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_tc_open(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    UINT8   event;
+#if AVDT_REPORTING == TRUE
+    UINT8   role;
+#endif
+
+    /* stop transport channel connect timer */
+    btu_stop_timer(&p_scb->timer_entry);
+
+    event = (p_scb->role == AVDT_OPEN_INT) ? AVDT_OPEN_CFM_EVT : AVDT_OPEN_IND_EVT;
+    p_data->open.hdr.err_code = 0;
+
+    AVDT_TRACE_DEBUG3("psc_mask: cfg: 0x%x, req:0x%x, cur: 0x%x",
+        p_scb->cs.cfg.psc_mask, p_scb->req_cfg.psc_mask, p_scb->curr_cfg.psc_mask);
+#if AVDT_REPORTING == TRUE
+    if(p_scb->curr_cfg.psc_mask & AVDT_PSC_REPORT)
+    {
+        /* open the reporting channel, if both devices support it */
+        role = (p_scb->role == AVDT_OPEN_INT) ? AVDT_INT : AVDT_ACP;
+        avdt_ad_open_req(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb, role);
+    }
+#endif
+
+    /* call app callback */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              event,
+                              (tAVDT_CTRL *) &p_data->open);
+}
+
+#if AVDT_REPORTING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_tc_open_sto
+**
+** Description      This function is called when the transport channel is
+**                  opened while in the opening state.  It calls the
+**                  application callback with an open indication or open
+**                  confirm depending on who initiated the open procedure.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_tc_open_sto(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL          avdt_ctrl;
+    /* open reporting channel here, when it is implemented */
+
+    /* call app callback */
+    if(p_data->open.hdr.err_code == AVDT_CHAN_REPORT)
+    {
+        avdt_ctrl.hdr.err_code = 0;
+        avdt_ctrl.hdr.err_param = 1;
+        (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              p_scb->p_ccb ? p_scb->p_ccb->peer_addr : NULL,
+                              AVDT_REPORT_CONN_EVT, &avdt_ctrl);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_write_req_no_frag
+**
+** Description      This function frees the media packet currently stored in
+**                  the SCB, if any.  Then it builds a new media packet from
+**                  with the passed in buffer and stores it in the SCB.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_write_req_no_frag(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    UINT8   *p;
+    UINT32  ssrc;
+
+    /* free packet we're holding, if any; to be replaced with new */
+    if (p_scb->p_pkt != NULL)
+    {
+        GKI_freebuf(p_scb->p_pkt);
+
+        /* this shouldn't be happening */
+        AVDT_TRACE_WARNING0("Dropped media packet; congested");
+    }
+
+    /* build a media packet */
+
+    ssrc = avdt_scb_gen_ssrc(p_scb);
+
+    p_data->apiwrite.p_buf->len += AVDT_MEDIA_HDR_SIZE;
+    p_data->apiwrite.p_buf->offset -= AVDT_MEDIA_HDR_SIZE;
+
+    p = (UINT8 *)(p_data->apiwrite.p_buf + 1) + p_data->apiwrite.p_buf->offset;
+
+    UINT8_TO_BE_STREAM(p, AVDT_MEDIA_OCTET1);
+    UINT8_TO_BE_STREAM(p, p_data->apiwrite.m_pt);
+    UINT16_TO_BE_STREAM(p, p_scb->media_seq);
+    UINT32_TO_BE_STREAM(p, p_data->apiwrite.time_stamp);
+    UINT32_TO_BE_STREAM(p, ssrc);
+
+    p_scb->media_seq++;
+
+    /* store it */
+    p_scb->p_pkt = p_data->apiwrite.p_buf;
+}
+
+#if AVDT_MULTIPLEXING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_write_req_frag
+**
+** Description      This function builds a new fragments of media packet from
+**                  the passed in buffers and stores them in the SCB.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_write_req_frag(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    UINT8   *p;
+    UINT32  ssrc;
+    BT_HDR  *p_frag;
+
+    /* free fragments we're holding, if any; it shouldn't happen */
+    if (!GKI_queue_is_empty(&p_scb->frag_q))
+    {
+        while((p_frag = (BT_HDR*)GKI_dequeue (&p_scb->frag_q)) != NULL)
+            GKI_freebuf(p_frag);
+
+        /* this shouldn't be happening */
+        AVDT_TRACE_WARNING0("*** Dropped media packet; congested");
+    }
+
+    /* build a media fragments */
+    p_scb->frag_off = p_data->apiwrite.data_len;
+    p_scb->p_next_frag = p_data->apiwrite.p_data;
+
+    ssrc = avdt_scb_gen_ssrc(p_scb);
+
+    /* get first packet */
+    p_frag = (BT_HDR*)GKI_getfirst (&p_data->apiwrite.frag_q);
+    /* posit on Adaptation Layer header */
+    p_frag->len += AVDT_AL_HDR_SIZE + AVDT_MEDIA_HDR_SIZE;
+    p_frag->offset -= AVDT_AL_HDR_SIZE + AVDT_MEDIA_HDR_SIZE;
+    p = (UINT8 *)(p_frag + 1) + p_frag->offset;
+
+    /* Adaptation Layer header */
+    /* TSID, no-fragment bit and coding of length(in 2 length octets following) */
+    *p++ = (p_scb->curr_cfg.mux_tsid_media<<3) | AVDT_ALH_LCODE_16BIT;
+
+    /* length of all remaining transport packet */
+    UINT16_TO_BE_STREAM(p, p_frag->layer_specific+AVDT_MEDIA_HDR_SIZE );
+    /* media header */
+    UINT8_TO_BE_STREAM(p, AVDT_MEDIA_OCTET1);
+    UINT8_TO_BE_STREAM(p, p_data->apiwrite.m_pt);
+    UINT16_TO_BE_STREAM(p, p_scb->media_seq);
+    UINT32_TO_BE_STREAM(p, p_data->apiwrite.time_stamp);
+    UINT32_TO_BE_STREAM(p, ssrc);
+    p_scb->media_seq++;
+
+    while((p_frag = (BT_HDR*)GKI_getnext (p_frag)) != NULL)
+    {
+        /* posit on Adaptation Layer header */
+        p_frag->len += AVDT_AL_HDR_SIZE;
+        p_frag->offset -= AVDT_AL_HDR_SIZE;
+        p = (UINT8 *)(p_frag + 1) + p_frag->offset;
+        /* Adaptation Layer header */
+        /* TSID, fragment bit and coding of length(in 2 length octets following) */
+        *p++ = (p_scb->curr_cfg.mux_tsid_media<<3) | (AVDT_ALH_FRAG_MASK|AVDT_ALH_LCODE_16BIT);
+
+        /* length of all remaining transport packet */
+        UINT16_TO_BE_STREAM(p, p_frag->layer_specific );
+    }
+
+    /* store it */
+    p_scb->frag_q = p_data->apiwrite.frag_q;
+}
+#endif
+
+
+/*******************************************************************************
+**
+** Function         avdt_scb_hdl_write_req
+**
+** Description      This function calls one of the two versions of building functions
+**                  for case with and without fragmentation
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_hdl_write_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+#if AVDT_MULTIPLEXING == TRUE
+    if (GKI_queue_is_empty(&p_data->apiwrite.frag_q))
+#endif
+        avdt_scb_hdl_write_req_no_frag(p_scb, p_data);
+#if AVDT_MULTIPLEXING == TRUE
+    else
+        avdt_scb_hdl_write_req_frag(p_scb, p_data);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_abort_req
+**
+** Description      This function sends an abort command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_abort_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_EVT_HDR   hdr;
+
+    if (p_scb->p_ccb != NULL)
+    {
+        p_scb->role = AVDT_CLOSE_INT;
+
+        hdr.seid = p_scb->peer_seid;
+
+        avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_ABORT, (tAVDT_MSG *) &hdr);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_abort_rsp
+**
+** Description      This function sends an abort response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_abort_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    avdt_msg_send_rsp(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx), AVDT_SIG_ABORT,
+                      &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_close_req
+**
+** Description      This function sends a close command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_close_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_EVT_HDR   hdr;
+
+    p_scb->role = AVDT_CLOSE_INT;
+
+    hdr.seid = p_scb->peer_seid;
+
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_CLOSE, (tAVDT_MSG *) &hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_stream_close
+**
+** Description      This function sends a close command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_stream_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+#if AVDT_MULTIPLEXING == TRUE
+    BT_HDR          *p_frag;
+
+    AVDT_TRACE_WARNING2("avdt_scb_snd_stream_close c:%d, off:%d",
+        p_scb->frag_q.count, p_scb->frag_off);
+    /* clean fragments queue */
+    while((p_frag = (BT_HDR*)GKI_dequeue (&p_scb->frag_q)) != NULL)
+         GKI_freebuf(p_frag);
+    p_scb->frag_off = 0;
+#endif
+    if (p_scb->p_pkt)
+    {
+        GKI_freebuf(p_scb->p_pkt);
+        p_scb->p_pkt = NULL;
+    }
+
+#if 0
+    if(p_scb->cong)
+        p_scb->cong = FALSE;
+
+    /* p_scb->curr_cfg.mux_tsid_media == 0 */
+#endif
+    avdt_scb_snd_close_req(p_scb, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_close_rsp
+**
+** Description      This function sends a close response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_close_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_CLOSE, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_getconfig_req
+**
+** Description      This function sends a get configuration command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_getconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_EVT_HDR   hdr;
+
+    hdr.seid = p_scb->peer_seid;
+
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_GETCONFIG, (tAVDT_MSG *) &hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_getconfig_rsp
+**
+** Description      This function sends a get configuration response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_getconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_GETCONFIG, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_open_req
+**
+** Description      This function sends an open command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_open_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_EVT_HDR   hdr;
+
+    hdr.seid = p_scb->peer_seid;
+
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_OPEN, (tAVDT_MSG *) &hdr);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_open_rsp
+**
+** Description      This function sends an open response message.  It also
+**                  calls avdt_ad_open_req() to accept a transport channel
+**                  connection.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_open_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    /* notify adaption that we're waiting for transport channel open */
+    p_scb->role = AVDT_OPEN_ACP;
+    avdt_ad_open_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb, AVDT_ACP);
+
+    /* send response */
+    avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_OPEN, &p_data->msg);
+
+    /* start tc connect timer */
+    btu_start_timer(&p_scb->timer_entry, BTU_TTYPE_AVDT_SCB_TC, AVDT_SCB_TC_CONN_TOUT);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_reconfig_req
+**
+** Description      This function stores the configuration parameters in the
+**                  SCB and sends a reconfiguration command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_reconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    memcpy(&p_scb->req_cfg, p_data->msg.config_cmd.p_cfg, sizeof(tAVDT_CFG));
+    p_data->msg.hdr.seid = p_scb->peer_seid;
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_RECONFIG, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_reconfig_rsp
+**
+** Description      This function stores the configuration parameters in the
+**                  SCB and sends a reconfiguration response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_reconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    if (p_data->msg.hdr.err_code == 0)
+    {
+        /* store new configuration */
+        if (p_scb->req_cfg.num_codec > 0)
+        {
+            p_scb->curr_cfg.num_codec = p_scb->req_cfg.num_codec;
+            memcpy(p_scb->curr_cfg.codec_info, p_scb->req_cfg.codec_info, AVDT_CODEC_SIZE);
+        }
+        if (p_scb->req_cfg.num_protect > 0)
+        {
+            p_scb->curr_cfg.num_protect = p_scb->req_cfg.num_protect;
+            memcpy(p_scb->curr_cfg.protect_info, p_scb->req_cfg.protect_info, AVDT_PROTECT_SIZE);
+        }
+
+        /* send response */
+        avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_RECONFIG, &p_data->msg);
+    }
+    else
+    {
+        /* send reject */
+        avdt_msg_send_rej(p_scb->p_ccb, AVDT_SIG_RECONFIG, &p_data->msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_security_req
+**
+** Description      This function sends a security command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_security_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_data->msg.hdr.seid = p_scb->peer_seid;
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_SECURITY, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_security_rsp
+**
+** Description      This function sends a security response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_security_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    if (p_data->msg.hdr.err_code == 0)
+    {
+        avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_SECURITY, &p_data->msg);
+    }
+    else
+    {
+        avdt_msg_send_rej(p_scb->p_ccb, AVDT_SIG_SECURITY, &p_data->msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_setconfig_rej
+**
+** Description      This function marks the SCB as not in use and sends a
+**                  set configuration reject message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_setconfig_rej(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    if (p_scb->p_ccb != NULL)
+    {
+        avdt_msg_send_rej(p_scb->p_ccb, AVDT_SIG_SETCONFIG, &p_data->msg);
+
+        /* clear scb variables */
+        avdt_scb_clr_vars(p_scb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_setconfig_req
+**
+** Description      This function marks the SCB as in use and copies the
+**                  configuration parameters to the SCB.  Then the function
+**                  sends a set configuration command message and initiates
+**                  opening of the signaling channel.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_setconfig_req(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CFG *p_req, *p_cfg;
+
+    /* copy API parameters to scb, set scb as in use */
+    p_scb->in_use = TRUE;
+    p_scb->p_ccb = avdt_ccb_by_idx(p_data->msg.config_cmd.hdr.ccb_idx);
+    p_scb->peer_seid = p_data->msg.config_cmd.hdr.seid;
+    p_req = p_data->msg.config_cmd.p_cfg;
+    p_cfg = &p_scb->cs.cfg;
+#if AVDT_MULTIPLEXING == TRUE
+    p_req->mux_tsid_media = p_cfg->mux_tsid_media;
+    p_req->mux_tcid_media = p_cfg->mux_tcid_media;
+    if(p_req->psc_mask & AVDT_PSC_REPORT)
+    {
+        p_req->mux_tsid_report = p_cfg->mux_tsid_report;
+        p_req->mux_tcid_report = p_cfg->mux_tcid_report;
+    }
+#endif
+    memcpy(&p_scb->req_cfg, p_data->msg.config_cmd.p_cfg, sizeof(tAVDT_CFG));
+
+    avdt_msg_send_cmd(p_scb->p_ccb, p_scb, AVDT_SIG_SETCONFIG, &p_data->msg);
+
+    /* tell ccb to open channel */
+    avdt_ccb_event(p_scb->p_ccb, AVDT_CCB_UL_OPEN_EVT, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_setconfig_rsp
+**
+** Description      This function copies the requested configuration into the
+**                  current configuration and sends a set configuration
+**                  response message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_setconfig_rsp(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    if (p_scb->p_ccb != NULL)
+    {
+        memcpy(&p_scb->curr_cfg, &p_scb->req_cfg, sizeof(tAVDT_CFG));
+
+        avdt_msg_send_rsp(p_scb->p_ccb, AVDT_SIG_SETCONFIG, &p_data->msg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_snd_tc_close
+**
+** Description      This function calls avdt_ad_close_req() to close the
+**                  transport channel for this SCB.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_snd_tc_close(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+#if AVDT_REPORTING == TRUE
+    if(p_scb->curr_cfg.psc_mask & AVDT_PSC_REPORT)
+        avdt_ad_close_req(AVDT_CHAN_REPORT, p_scb->p_ccb, p_scb);
+#endif
+    avdt_ad_close_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_cb_err
+**
+** Description      This function calls the application callback function
+**                  indicating an error.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_cb_err(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL          avdt_ctrl;
+
+    /* set error code and parameter */
+    avdt_ctrl.hdr.err_code = AVDT_ERR_BAD_STATE;
+    avdt_ctrl.hdr.err_param = 0;
+
+    /* call callback, using lookup table to get callback event */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb),
+                              NULL,
+                              avdt_scb_cback_evt[p_scb->curr_evt],
+                              &avdt_ctrl);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_cong_state
+**
+** Description      This function sets the congestion state of the SCB media
+**                  transport channel.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_cong_state(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->cong = p_data->llcong;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_rej_state
+**
+** Description      This function sends a reject message to the peer indicating
+**                  incorrect state for the received command message.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_rej_state(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_data->msg.hdr.err_code = AVDT_ERR_BAD_STATE;
+    p_data->msg.hdr.err_param = 0;
+    avdt_msg_send_rej(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx),
+                      p_data->msg.hdr.sig_id, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_rej_in_use
+**
+** Description      This function sends a reject message to the peer indicating
+**                  the stream is in use.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_rej_in_use(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_data->msg.hdr.err_code = AVDT_ERR_IN_USE;
+    p_data->msg.hdr.err_param = 0;
+    avdt_msg_send_rej(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx),
+                      p_data->msg.hdr.sig_id, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_rej_not_in_use
+**
+** Description      This function sends a reject message to the peer indicating
+**                  the stream is in use.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_rej_not_in_use(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_data->msg.hdr.err_code = AVDT_ERR_NOT_IN_USE;
+    p_data->msg.hdr.err_param = 0;
+    avdt_msg_send_rej(avdt_ccb_by_idx(p_data->msg.hdr.ccb_idx),
+                      p_data->msg.hdr.sig_id, &p_data->msg);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_set_remove
+**
+** Description      This function marks an SCB to be removed.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_set_remove(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->remove = TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_free_pkt
+**
+** Description      This function frees the media packet passed in.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_free_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL      avdt_ctrl;
+#if AVDT_MULTIPLEXING == TRUE
+    BT_HDR          *p_frag;
+#endif
+
+    /* set error code and parameter */
+    avdt_ctrl.hdr.err_code = AVDT_ERR_BAD_STATE;
+    avdt_ctrl.hdr.err_param = 0;
+
+    /* p_buf can be NULL in case using of fragments queue frag_q */
+    if(p_data->apiwrite.p_buf)
+        GKI_freebuf(p_data->apiwrite.p_buf);
+
+#if AVDT_MULTIPLEXING == TRUE
+    /* clean fragments queue */
+    while((p_frag = (BT_HDR*)GKI_dequeue (&p_data->apiwrite.frag_q)) != NULL)
+         GKI_freebuf(p_frag);
+#endif
+
+    AVDT_TRACE_WARNING0("Dropped media packet");
+
+    /* we need to call callback to keep data flow going */
+    (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb), NULL, AVDT_WRITE_CFM_EVT,
+                              &avdt_ctrl);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_clr_pkt
+**
+** Description      This function frees the media packet stored in the SCB.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_clr_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL      avdt_ctrl;
+    tAVDT_CCB       *p_ccb;
+    UINT8           tcid;
+    UINT16          lcid;
+#if AVDT_MULTIPLEXING == TRUE
+    BT_HDR          *p_frag;
+#endif
+
+    /* set error code and parameter */
+    avdt_ctrl.hdr.err_code = AVDT_ERR_BAD_STATE;
+    avdt_ctrl.hdr.err_param = 0;
+    /* flush the media data queued at L2CAP */
+    if((p_ccb = p_scb->p_ccb) != NULL)
+    {
+        /* get tcid from type, scb */
+        tcid = avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb);
+
+        lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_ccb)][tcid].lcid;
+        L2CA_FlushChannel (lcid, L2CAP_FLUSH_CHANS_ALL);
+    }
+
+    if (p_scb->p_pkt != NULL)
+    {
+        GKI_freebuf(p_scb->p_pkt);
+        p_scb->p_pkt = NULL;
+
+        AVDT_TRACE_DEBUG0("Dropped stored media packet");
+
+        /* we need to call callback to keep data flow going */
+        (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb), NULL, AVDT_WRITE_CFM_EVT,
+                                  &avdt_ctrl);
+    }
+#if AVDT_MULTIPLEXING == TRUE
+    else if(!GKI_queue_is_empty (&p_scb->frag_q))
+    {
+        AVDT_TRACE_DEBUG0("Dropped fragments queue");
+        /* clean fragments queue */
+        while((p_frag = (BT_HDR*)GKI_dequeue (&p_scb->frag_q)) != NULL)
+             GKI_freebuf(p_frag);
+
+        p_scb->frag_off = 0;
+
+        /* we need to call callback to keep data flow going */
+        (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb), NULL, AVDT_WRITE_CFM_EVT,
+                                  &avdt_ctrl);
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         avdt_scb_chk_snd_pkt
+**
+** Description      This function checks if the SCB is congested, and if not
+**                  congested it sends a stored media packet, if any.  After it
+**                  sends the packet it calls the application callback function
+**                  with a write confirm.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_chk_snd_pkt(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    tAVDT_CTRL      avdt_ctrl;
+    BT_HDR          *p_pkt;
+#if AVDT_MULTIPLEXING == TRUE
+    BOOLEAN         sent = FALSE;
+    UINT8   res = AVDT_AD_SUCCESS;
+    tAVDT_SCB_EVT data;
+#endif
+
+    avdt_ctrl.hdr.err_code = 0;
+
+    if (!p_scb->cong)
+    {
+        if (p_scb->p_pkt != NULL)
+        {
+            p_pkt = p_scb->p_pkt;
+            p_scb->p_pkt = NULL;
+            avdt_ad_write_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb, p_pkt);
+
+            (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb), NULL, AVDT_WRITE_CFM_EVT, &avdt_ctrl);
+        }
+#if AVDT_MULTIPLEXING == TRUE
+        else
+        {
+#if 0
+            AVDT_TRACE_DEBUG1("num_q=%d",
+                L2CA_FlushChannel(avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_scb->p_ccb)][avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb)].lcid),
+                                  L2CAP_FLUSH_CHANS_GET);
+#endif
+            while((p_pkt = (BT_HDR*)GKI_dequeue (&p_scb->frag_q)) != NULL)
+            {
+                sent = TRUE;
+                AVDT_TRACE_DEBUG1("Send fragment len=%d",p_pkt->len);
+                /* fragments queue contains fragment to send */
+                res = avdt_ad_write_req(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb, p_pkt);
+                if(AVDT_AD_CONGESTED == res)
+                {
+                    p_scb->cong = TRUE;
+                    AVDT_TRACE_DEBUG0("avdt/l2c congested!!");
+                    break;/* exit loop if channel became congested */
+            }
+            }
+            AVDT_TRACE_DEBUG2("res=%d left=%d",res, p_scb->frag_off);
+
+            if(p_scb->frag_off)
+            {
+                if(AVDT_AD_SUCCESS == res || GKI_queue_is_empty (&p_scb->frag_q))
+                {
+                    /* all buffers were sent to L2CAP, compose more to queue */
+                    avdt_scb_queue_frags(p_scb, &p_scb->p_next_frag, &p_scb->frag_off, &p_scb->frag_q);
+                    if(!GKI_queue_is_empty (&p_scb->frag_q))
+                    {
+                        data.llcong = p_scb->cong;
+                        avdt_scb_event(p_scb, AVDT_SCB_TC_CONG_EVT, &data);
+                    }
+                }
+            }
+
+            /* Send event AVDT_WRITE_CFM_EVT if it was last fragment */
+            else if (sent && GKI_queue_is_empty (&p_scb->frag_q))
+            {
+                (*p_scb->cs.p_ctrl_cback)(avdt_scb_to_hdl(p_scb), NULL, AVDT_WRITE_CFM_EVT, &avdt_ctrl);
+            }
+        }
+#endif
+    }
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_tc_timer
+**
+** Description      This function is called to start a timer when the peer
+**                  initiates closing of the stream.  The timer verifies that
+**                  the peer disconnects the transport channel.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_tc_timer(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    btu_start_timer(&p_scb->timer_entry, BTU_TTYPE_AVDT_SCB_TC, AVDT_SCB_TC_DISC_TOUT);
+}
+
+/*******************************************************************************
+**
+** Function         avdt_scb_clr_vars
+**
+** Description      This function initializes certain SCB variables.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_clr_vars(tAVDT_SCB *p_scb, tAVDT_SCB_EVT *p_data)
+{
+    p_scb->in_use = FALSE;
+    p_scb->p_ccb = NULL;
+    p_scb->peer_seid = 0;
+}
+
+#if AVDT_MULTIPLEXING == TRUE
+/*******************************************************************************
+**
+** Function         avdt_scb_queue_frags
+**
+** Description      This function breaks media payload into fragments
+**                  and put the fragments in the given queue.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void avdt_scb_queue_frags(tAVDT_SCB *p_scb, UINT8 **pp_data, UINT32 *p_data_len, BUFFER_Q *pq)
+{
+    UINT16  lcid;
+    UINT16  num_frag;
+    UINT16  mtu_used;
+    UINT8   *p;
+    BOOLEAN al_hdr = FALSE;
+    UINT8   tcid;
+    tAVDT_TC_TBL    *p_tbl;
+    UINT16          buf_size;
+    UINT16          offset = AVDT_MEDIA_OFFSET + AVDT_AL_HDR_SIZE;
+    UINT16          cont_offset = offset - AVDT_MEDIA_HDR_SIZE;
+    BT_HDR          *p_frag;
+
+    tcid = avdt_ad_type_to_tcid(AVDT_CHAN_MEDIA, p_scb);
+    lcid = avdt_cb.ad.rt_tbl[avdt_ccb_to_idx(p_scb->p_ccb)][tcid].lcid;
+
+    if( p_scb->frag_off != 0)
+    {
+        /* continuing process is usually triggered by un-congest event.
+         * the number of buffers at L2CAP is very small (if not 0).
+         * we do not need to L2CA_FlushChannel() */
+        offset = cont_offset;
+        al_hdr = TRUE;
+        num_frag = AVDT_MAX_FRAG_COUNT;
+    }
+    else
+    {
+        num_frag = L2CA_FlushChannel(lcid, L2CAP_FLUSH_CHANS_GET);
+        AVDT_TRACE_DEBUG2("num_q=%d lcid=%d", num_frag, lcid);
+        if(num_frag >= AVDT_MAX_FRAG_COUNT)
+        {
+            num_frag = 0;
+        }
+        else
+        {
+            num_frag = AVDT_MAX_FRAG_COUNT - num_frag;
+        }
+    }
+
+    /* look up transport channel table entry to get peer mtu */
+    p_tbl = avdt_ad_tc_tbl_by_type(AVDT_CHAN_MEDIA, p_scb->p_ccb, p_scb);
+    buf_size = p_tbl->peer_mtu + BT_HDR_SIZE;
+    AVDT_TRACE_DEBUG3("peer_mtu: %d, buf_size: %d num_frag=%d",
+        p_tbl->peer_mtu, buf_size, num_frag);
+
+    if(buf_size > AVDT_DATA_POOL_SIZE)
+        buf_size = AVDT_DATA_POOL_SIZE;
+
+    mtu_used = buf_size - BT_HDR_SIZE;
+
+    while(*p_data_len && num_frag)
+    {
+        /* allocate buffer for fragment */
+        if(NULL == (p_frag = (BT_HDR*)GKI_getbuf(buf_size)))
+        {
+            AVDT_TRACE_WARNING1("avdt_scb_queue_frags len=%d(out of GKI buffers)",*p_data_len);
+            break;
+        }
+        /* fill fragment by chunk of media payload */
+        p_frag->layer_specific = *p_data_len;/* length of all remaining transport packet */
+        p_frag->offset = offset;
+        /* adjust packet offset for continuing packets */
+        offset = cont_offset;
+
+        p_frag->len = mtu_used - p_frag->offset;
+        if(p_frag->len > *p_data_len)
+            p_frag->len = *p_data_len;
+        memcpy((UINT8*)(p_frag+1) + p_frag->offset, *pp_data, p_frag->len);
+        *pp_data += p_frag->len;
+        *p_data_len -= p_frag->len;
+        AVDT_TRACE_DEBUG1("Prepared fragment len=%d", p_frag->len);
+
+        if(al_hdr)
+        {
+            /* Adaptation Layer header */
+            p_frag->len += AVDT_AL_HDR_SIZE;
+            p_frag->offset -= AVDT_AL_HDR_SIZE;
+            p = (UINT8 *)(p_frag + 1) + p_frag->offset;
+            /* TSID, fragment bit and coding of length(in 2 length octets following) */
+            *p++ = (p_scb->curr_cfg.mux_tsid_media<<3) | (AVDT_ALH_FRAG_MASK|AVDT_ALH_LCODE_16BIT);
+
+            /* length of all remaining transport packet */
+            UINT16_TO_BE_STREAM(p, p_frag->layer_specific );
+        }
+        /* put fragment into gueue */
+        GKI_enqueue(pq, p_frag);
+        num_frag--;
+    }
+}
+#endif
+
diff --git a/stack/avrc/avrc_api.c b/stack/avrc/avrc_api.c
new file mode 100644
index 0000000..b6347d7
--- /dev/null
+++ b/stack/avrc/avrc_api.c
@@ -0,0 +1,588 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  nterface to AVRCP mandatory commands
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "gki.h"
+#include "avrc_api.h"
+#include "avrc_int.h"
+#include "wcassert.h"
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+
+
+#define AVRC_MAX_RCV_CTRL_EVT   AVCT_BROWSE_UNCONG_IND_EVT
+
+static const UINT8 avrc_ctrl_event_map[] =
+{
+    AVRC_OPEN_IND_EVT,  /* AVCT_CONNECT_CFM_EVT */
+    AVRC_OPEN_IND_EVT,  /* AVCT_CONNECT_IND_EVT */
+    AVRC_CLOSE_IND_EVT, /* AVCT_DISCONNECT_CFM_EVT */
+    AVRC_CLOSE_IND_EVT, /* AVCT_DISCONNECT_IND_EVT */
+    AVRC_CONG_IND_EVT,  /* AVCT_CONG_IND_EVT */
+    AVRC_UNCONG_IND_EVT,/* AVCT_UNCONG_IND_EVT */
+    AVRC_BROWSE_OPEN_IND_EVT,  /* AVCT_BROWSE_CONN_CFM_EVT   */
+    AVRC_BROWSE_OPEN_IND_EVT,  /* AVCT_BROWSE_CONN_IND_EVT   */
+    AVRC_BROWSE_CLOSE_IND_EVT, /* AVCT_BROWSE_DISCONN_CFM_EVT */
+    AVRC_BROWSE_CLOSE_IND_EVT, /* AVCT_BROWSE_DISCONN_IND_EVT */
+    AVRC_BROWSE_CONG_IND_EVT,  /* AVCT_BROWSE_CONG_IND_EVT    */
+    AVRC_BROWSE_UNCONG_IND_EVT /* AVCT_BROWSE_UNCONG_IND_EVT  */
+};
+
+#define AVRC_OP_DROP        0xFE    /* use this unused opcode to indication no need to call the callback function */
+#define AVRC_OP_DROP_N_FREE 0xFD    /* use this unused opcode to indication no need to call the callback function & free buffer */
+
+/******************************************************************************
+**
+** Function         avrc_ctrl_cback
+**
+** Description      This is the callback function used by AVCTP to report
+**                  received link events.
+**
+** Returns          Nothing.
+**
+******************************************************************************/
+static void avrc_ctrl_cback(UINT8 handle, UINT8 event, UINT16 result,
+                                BD_ADDR peer_addr)
+{
+    UINT8   avrc_event;
+
+    if (event <= AVRC_MAX_RCV_CTRL_EVT && avrc_cb.ccb[handle].p_ctrl_cback)
+    {
+        avrc_event = avrc_ctrl_event_map[event];
+        if (event == AVCT_CONNECT_CFM_EVT)
+        {
+            if (result != 0) /* failed */
+                avrc_event = AVRC_CLOSE_IND_EVT;
+        }
+        (*avrc_cb.ccb[handle].p_ctrl_cback)(handle, avrc_event, result, peer_addr);
+    }
+    /* else drop the unknown event*/
+}
+
+/******************************************************************************
+**
+** Function         avrc_get_data_ptr
+**
+** Description      If the offset in the received buffer is smaller than required
+**                  move the portion of data AVRC cares.
+**
+** Returns          Nothing.
+**
+******************************************************************************/
+static UINT8 * avrc_get_data_ptr(BT_HDR *p_pkt)
+{
+    UINT8   *p_data = (UINT8 *)(p_pkt+1) + p_pkt->offset;
+    int     i, gap;
+
+    if (p_pkt->offset < AVCT_MSG_OFFSET)
+    {
+        gap = AVCT_MSG_OFFSET - p_pkt->offset;
+        for(i=p_pkt->len; i>0; i--)
+        {
+            *(p_data + i + gap) = *(p_data + i);
+        }
+        p_pkt->offset   += gap;
+        p_data          = (UINT8 *)(p_pkt+1) + p_pkt->offset;
+    }
+    *p_data         = AVRC_RSP_IMPL_STBL;
+    return p_data;
+}
+
+
+/******************************************************************************
+**
+** Function         avrc_msg_cback
+**
+** Description      This is the callback function used by AVCTP to report
+**                  received AV control messages.
+**
+** Returns          Nothing.
+**
+******************************************************************************/
+static void avrc_msg_cback(UINT8 handle, UINT8 label, UINT8 cr,
+                               BT_HDR *p_pkt)
+{
+    UINT8       opcode;
+    tAVRC_MSG   msg;
+    UINT8       *p_data;
+    UINT8       *p_begin;
+    BOOLEAN     drop = FALSE;
+    BOOLEAN     free = TRUE;
+    BT_HDR      *p_rsp = NULL;
+    UINT8       *p_rsp_data;
+    int         xx;
+    BOOLEAN     reject = FALSE;
+#if (BT_USE_TRACES == TRUE)
+    char        *p_drop_msg = "dropped";
+#endif
+    tAVRC_MSG_VENDOR *p_msg = &msg.vendor;
+
+    if (cr == AVCT_CMD &&
+        (p_pkt->layer_specific & AVCT_DATA_CTRL && AVRC_PACKET_LEN < sizeof(p_pkt->len)))
+    {
+        /* Ignore the invalid AV/C command frame */
+#if (BT_USE_TRACES == TRUE)
+        p_drop_msg = "dropped - too long AV/C cmd frame size";
+#endif
+        GKI_freebuf(p_pkt);
+        return;
+    }
+
+    if (cr == AVCT_REJ)
+    {
+        /* The peer thinks that this PID is no longer open - remove this handle */
+        /*  */
+        GKI_freebuf(p_pkt);
+        AVCT_RemoveConn(handle);
+        return;
+    }
+
+    p_data  = (UINT8 *)(p_pkt+1) + p_pkt->offset;
+    memset(&msg, 0, sizeof(tAVRC_MSG) );
+    {
+        msg.hdr.ctype           = p_data[0] & AVRC_CTYPE_MASK;
+        AVRC_TRACE_DEBUG4("avrc_msg_cback handle:%d, ctype:%d, offset:%d, len: %d",
+                handle, msg.hdr.ctype, p_pkt->offset, p_pkt->len);
+        msg.hdr.subunit_type    = (p_data[1] & AVRC_SUBTYPE_MASK) >> AVRC_SUBTYPE_SHIFT;
+        msg.hdr.subunit_id      = p_data[1] & AVRC_SUBID_MASK;
+        opcode                  = p_data[2];
+    }
+
+    if ( ((avrc_cb.ccb[handle].control & AVRC_CT_TARGET) && (cr == AVCT_CMD)) ||
+        ((avrc_cb.ccb[handle].control & AVRC_CT_CONTROL) && (cr == AVCT_RSP)) )
+    {
+
+        switch(opcode)
+        {
+        case AVRC_OP_UNIT_INFO:
+            if (cr == AVCT_CMD)
+            {
+                /* send the response to the peer */
+                p_rsp           = p_pkt; /* this also sets free = FALSE, drop = TRUE */
+                /* check & set the offset. set response code, set subunit_type & subunit_id,
+                   set AVRC_OP_UNIT_INFO */
+                p_rsp_data      = avrc_get_data_ptr(p_pkt) + AVRC_AVC_HDR_SIZE; /* 3 bytes: ctype, subunit*, opcode */
+                *p_rsp_data++   = 7;
+                /* Panel subunit & id=0 */
+                *p_rsp_data++   = (AVRC_SUB_PANEL << AVRC_SUBTYPE_SHIFT);
+                AVRC_CO_ID_TO_BE_STREAM(p_rsp_data, avrc_cb.ccb[handle].company_id);
+                p_rsp->len      = (UINT16) (p_rsp_data - (UINT8 *)(p_rsp + 1) - p_rsp->offset);
+                cr = AVCT_RSP;
+#if (BT_USE_TRACES == TRUE)
+                p_drop_msg = "auto respond";
+#endif
+            }
+            else
+            {
+                /* parse response */
+                p_data += 4; /* 3 bytes: ctype, subunit*, opcode + octet 3 (is 7)*/
+                msg.unit.unit_type  = (*p_data & AVRC_SUBTYPE_MASK) >> AVRC_SUBTYPE_SHIFT;
+                msg.unit.unit       = *p_data & AVRC_SUBID_MASK;
+                p_data++;
+                AVRC_BE_STREAM_TO_CO_ID(msg.unit.company_id, p_data);
+            }
+            break;
+
+        case AVRC_OP_SUB_INFO:
+            if (cr == AVCT_CMD)
+            {
+                /* send the response to the peer */
+                p_rsp           = p_pkt; /* this also sets free = FALSE, drop = TRUE */
+                /* check & set the offset. set response code, set (subunit_type & subunit_id),
+                   set AVRC_OP_SUB_INFO, set (page & extention code) */
+                p_rsp_data      = avrc_get_data_ptr(p_pkt) + 4;
+                /* Panel subunit & id=0 */
+                *p_rsp_data++   = (AVRC_SUB_PANEL << AVRC_SUBTYPE_SHIFT);
+                memset(p_rsp_data, AVRC_CMD_OPRND_PAD, AVRC_SUBRSP_OPRND_BYTES);
+                p_rsp_data      += AVRC_SUBRSP_OPRND_BYTES;
+                p_rsp->len      = (UINT16) (p_rsp_data - (UINT8 *)(p_rsp + 1) - p_rsp->offset);
+                cr = AVCT_RSP;
+#if (BT_USE_TRACES == TRUE)
+                p_drop_msg = "auto responded";
+#endif
+            }
+            else
+            {
+                /* parse response */
+                p_data += AVRC_AVC_HDR_SIZE; /* 3 bytes: ctype, subunit*, opcode */
+                msg.sub.page    = (*p_data++ >> AVRC_SUB_PAGE_SHIFT) & AVRC_SUB_PAGE_MASK;
+                xx      = 0;
+                while (*p_data != AVRC_CMD_OPRND_PAD && xx<AVRC_SUB_TYPE_LEN)
+                {
+                    msg.sub.subunit_type[xx] = *p_data++ >> AVRC_SUBTYPE_SHIFT;
+                    if (msg.sub.subunit_type[xx] == AVRC_SUB_PANEL)
+                        msg.sub.panel   = TRUE;
+                    xx++;
+                }
+            }
+            break;
+
+        case AVRC_OP_VENDOR:
+            p_data  = (UINT8 *)(p_pkt+1) + p_pkt->offset;
+            p_begin = p_data;
+            if (p_pkt->len < AVRC_VENDOR_HDR_SIZE) /* 6 = ctype, subunit*, opcode & CO_ID */
+            {
+                if (cr == AVCT_CMD)
+                    reject = TRUE;
+                else
+                    drop = TRUE;
+                break;
+            }
+            p_data += AVRC_AVC_HDR_SIZE; /* skip the first 3 bytes: ctype, subunit*, opcode */
+            AVRC_BE_STREAM_TO_CO_ID(p_msg->company_id, p_data);
+            p_msg->p_vendor_data   = p_data;
+            p_msg->vendor_len      = p_pkt->len - (p_data - p_begin);
+
+            break;
+
+        case AVRC_OP_PASS_THRU:
+            if (p_pkt->len < 5) /* 3 bytes: ctype, subunit*, opcode & op_id & len */
+            {
+                if (cr == AVCT_CMD)
+                    reject = TRUE;
+                else
+                    drop = TRUE;
+                break;
+            }
+            p_data += AVRC_AVC_HDR_SIZE; /* skip the first 3 bytes: ctype, subunit*, opcode */
+            msg.pass.op_id  = (AVRC_PASS_OP_ID_MASK & *p_data);
+            if (AVRC_PASS_STATE_MASK & *p_data)
+                msg.pass.state  = TRUE;
+            else
+                msg.pass.state  = FALSE;
+            p_data++;
+            msg.pass.pass_len    = *p_data++;
+            if (msg.pass.pass_len != p_pkt->len - 5)
+                msg.pass.pass_len = p_pkt->len - 5;
+            if (msg.pass.pass_len)
+                msg.pass.p_pass_data = p_data;
+            else
+                msg.pass.p_pass_data = NULL;
+            break;
+
+
+        default:
+            if ((avrc_cb.ccb[handle].control & AVRC_CT_TARGET) && (cr == AVCT_CMD))
+            {
+                /* reject unsupported opcode */
+                reject = TRUE;
+            }
+            drop    = TRUE;
+            break;
+        }
+    }
+    else /* drop the event */
+    {
+            drop    = TRUE;
+    }
+
+    if (reject)
+    {
+        /* reject unsupported opcode */
+        p_rsp           = p_pkt; /* this also sets free = FALSE, drop = TRUE */
+        p_rsp_data      = avrc_get_data_ptr(p_pkt);
+        *p_rsp_data     = AVRC_RSP_REJ;
+#if (BT_USE_TRACES == TRUE)
+        p_drop_msg = "rejected";
+#endif
+        cr      = AVCT_RSP;
+        drop    = TRUE;
+    }
+
+    if (p_rsp)
+    {
+        /* set to send response right away */
+        AVCT_MsgReq( handle, label, cr, p_rsp);
+        free = FALSE;
+        drop = TRUE;
+    }
+
+    if (drop == FALSE)
+    {
+        msg.hdr.opcode = opcode;
+        (*avrc_cb.ccb[handle].p_msg_cback)(handle, label, opcode, &msg);
+    }
+#if (BT_USE_TRACES == TRUE)
+    else
+    {
+        AVRC_TRACE_WARNING5("avrc_msg_cback %s msg handle:%d, control:%d, cr:%d, opcode:x%x",
+                p_drop_msg,
+                handle, avrc_cb.ccb[handle].control, cr, opcode);
+    }
+#endif
+
+
+    if (free)
+        GKI_freebuf(p_pkt);
+}
+
+
+
+
+/******************************************************************************
+**
+** Function         avrc_pass_msg
+**
+** Description      Compose a PASS THROUGH command according to p_msg
+**
+**                  Input Parameters:
+**                      p_msg: Pointer to PASS THROUGH message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          pointer to a valid GKI buffer if successful.
+**                  NULL if p_msg is NULL.
+**
+******************************************************************************/
+static BT_HDR  * avrc_pass_msg(tAVRC_MSG_PASS *p_msg)
+{
+    BT_HDR  *p_cmd = NULL;
+    UINT8   *p_data;
+
+    WC_ASSERT(p_msg != NULL);
+    WC_ASSERT(AVRC_CMD_POOL_SIZE > (AVRC_MIN_CMD_LEN+p_msg->pass_len));
+
+    if ((p_cmd = (BT_HDR *) GKI_getpoolbuf(AVRC_CMD_POOL_ID)) != NULL)
+    {
+        p_cmd->offset   = AVCT_MSG_OFFSET;
+        p_cmd->layer_specific   = AVCT_DATA_CTRL;
+        p_data          = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+        *p_data++       = (p_msg->hdr.ctype & AVRC_CTYPE_MASK);
+        *p_data++       = (AVRC_SUB_PANEL << AVRC_SUBTYPE_SHIFT); /* Panel subunit & id=0 */
+        *p_data++       = AVRC_OP_PASS_THRU;
+        *p_data         = (AVRC_PASS_OP_ID_MASK&p_msg->op_id);
+        if (p_msg->state)
+            *p_data     |= AVRC_PASS_STATE_MASK;
+        p_data++;
+
+        if (p_msg->op_id == AVRC_ID_VENDOR)
+        {
+            *p_data++       = p_msg->pass_len;
+            if (p_msg->pass_len && p_msg->p_pass_data)
+            {
+                memcpy(p_data, p_msg->p_pass_data, p_msg->pass_len);
+                p_data += p_msg->pass_len;
+            }
+        }
+        else /* set msg len to 0 for other op_id */
+        {
+            /* set msg len to 0 for other op_id */
+            *p_data++       = 0;
+        }
+        p_cmd->len      = (UINT16) (p_data - (UINT8 *)(p_cmd + 1) - p_cmd->offset);
+    }
+    return p_cmd;
+}
+
+/******************************************************************************
+**
+** Function         AVRC_Open
+**
+** Description      This function is called to open a connection to AVCTP.
+**                  The connection can be either an initiator or acceptor, as
+**                  determined by the p_ccb->stream parameter.
+**                  The connection can be a target, a controller or for both role,
+**                  as determined by the p_ccb->control parameter.
+**                  By definition, a target connection is an acceptor connection
+**                  that waits for an incoming AVCTP connection from the peer.
+**                  The connection remains available to the application until
+**                  the application closes it by calling AVRC_Close().  The
+**                  application does not need to reopen the connection after an
+**                  AVRC_CLOSE_IND_EVT is received.
+**
+**                  Input Parameters:
+**                      p_ccb->company_id: Company Identifier.
+**
+**                      p_ccb->p_ctrl_cback:  Pointer to control callback function.
+**
+**                      p_ccb->p_msg_cback:  Pointer to message callback function.
+**
+**                      p_ccb->conn: AVCTP connection role.  This is set to
+**                      AVCTP_INT for initiator connections and AVCTP_ACP
+**                      for acceptor connections.
+**
+**                      p_ccb->control: Control role.  This is set to
+**                      AVRC_CT_TARGET for target connections, AVRC_CT_CONTROL
+**                      for control connections or (AVRC_CT_TARGET|AVRC_CT_CONTROL)
+**                      for connections that support both roles.
+**
+**                      peer_addr: BD address of peer device.  This value is
+**                      only used for initiator connections; for acceptor
+**                      connections it can be set to NULL.
+**
+**                  Output Parameters:
+**                      p_handle: Pointer to handle.  This parameter is only
+**                                valid if AVRC_SUCCESS is returned.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_NO_RESOURCES if there are not enough resources to open
+**                  the connection.
+**
+******************************************************************************/
+UINT16 AVRC_Open(UINT8 *p_handle, tAVRC_CONN_CB *p_ccb, BD_ADDR_PTR peer_addr)
+{
+    UINT16      status;
+    tAVCT_CC    cc;
+
+    cc.p_ctrl_cback = avrc_ctrl_cback;      /* Control callback */
+    cc.p_msg_cback  = avrc_msg_cback;       /* Message callback */
+    cc.pid          = UUID_SERVCLASS_AV_REMOTE_CONTROL;  /* Profile ID */
+    cc.role         = p_ccb->conn;          /* Initiator/acceptor role */
+    cc.control      = p_ccb->control;       /* Control role (Control/Target) */
+
+    status = AVCT_CreateConn(p_handle, &cc, peer_addr);
+    if (status == AVCT_SUCCESS)
+    {
+        memcpy(&avrc_cb.ccb[*p_handle], p_ccb, sizeof(tAVRC_CONN_CB));
+    }
+    AVRC_TRACE_DEBUG4("AVRC_Open role: %d, control:%d status:%d, handle:%d", cc.role, cc.control, status, *p_handle);
+
+    return status;
+}
+
+/******************************************************************************
+**
+** Function         AVRC_Close
+**
+** Description      Close a connection opened with AVRC_Open().
+**                  This function is called when the
+**                  application is no longer using a connection.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_Close(UINT8 handle)
+{
+    AVRC_TRACE_DEBUG1("AVRC_Close handle:%d", handle);
+    return AVCT_RemoveConn(handle);
+}
+
+
+/******************************************************************************
+**
+** Function         AVRC_MsgReq
+**
+** Description      This function is used to send the AVRCP byte stream in p_pkt
+**                  down to AVCTP.
+**
+**                  It is expected that p_pkt->offset is at least AVCT_MSG_OFFSET
+**                  p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE
+**                  p_pkt->event is AVRC_OP_VENDOR, AVRC_OP_PASS_THRU or AVRC_OP_BROWSE
+**                  The above BT_HDR settings are set by the AVRC_Bld* functions.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_MsgReq (UINT8 handle, UINT8 label, UINT8 ctype, BT_HDR *p_pkt)
+{
+    return AVRC_NO_RESOURCES;
+}
+
+
+/******************************************************************************
+**
+** Function         AVRC_PassCmd
+**
+** Description      Send a PASS THROUGH command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      p_msg: Pointer to PASS THROUGH message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_PassCmd(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg)
+{
+    BT_HDR *p_buf;
+    WC_ASSERT(p_msg != NULL);
+    if (p_msg)
+    {
+        p_msg->hdr.ctype    = AVRC_CMD_CTRL;
+        p_buf = avrc_pass_msg(p_msg);
+        if (p_buf)
+            return AVCT_MsgReq( handle, label, AVCT_CMD, p_buf);
+    }
+    return AVRC_NO_RESOURCES;
+}
+
+/******************************************************************************
+**
+** Function         AVRC_PassRsp
+**
+** Description      Send a PASS THROUGH response to the peer device.  This
+**                  function can only be called for target role connections.
+**                  This function must be called when a PASS THROUGH command
+**                  message is received from the peer through the
+**                  tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.  Must be the same value as
+**                      passed with the command message in the callback function.
+**
+**                      p_msg: Pointer to PASS THROUGH message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_PassRsp(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg)
+{
+    BT_HDR *p_buf;
+    WC_ASSERT(p_msg != NULL);
+    if (p_msg)
+    {
+        p_buf = avrc_pass_msg(p_msg);
+        if (p_buf)
+            return AVCT_MsgReq( handle, label, AVCT_RSP, p_buf);
+    }
+    return AVRC_NO_RESOURCES;
+}
+
diff --git a/stack/avrc/avrc_int.h b/stack/avrc/avrc_int.h
new file mode 100644
index 0000000..b6c90b1
--- /dev/null
+++ b/stack/avrc/avrc_int.h
@@ -0,0 +1,138 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  VRCP internal header file.
+ *
+ ******************************************************************************/
+
+
+#ifndef AVRC_INT_H
+#define AVRC_INT_H
+
+#include "avct_defs.h"
+#include "avrc_api.h"
+
+/*      DEBUG FLAGS
+ *
+ * #define META_DEBUG_ENABLED
+ */
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* Number of attributes in AVRC SDP record. */
+#define AVRC_NUM_ATTR            6
+
+/* Number of protocol elements in protocol element list. */
+#define AVRC_NUM_PROTO_ELEMS     2
+
+#ifndef AVRC_MIN_CMD_LEN
+#define AVRC_MIN_CMD_LEN    20
+#endif
+
+#define AVRC_UNIT_OPRND_BYTES   5
+#define AVRC_SUB_OPRND_BYTES    4
+#define AVRC_SUBRSP_OPRND_BYTES 3
+#define AVRC_SUB_PAGE_MASK      7
+#define AVRC_SUB_PAGE_SHIFT     4
+#define AVRC_SUB_EXT_CODE       7
+#define AVRC_PASS_OP_ID_MASK    0x7F
+#define AVRC_PASS_STATE_MASK    0x80
+#define AVRC_CMD_OPRND_PAD      0xFF
+
+#define AVRC_CTYPE_MASK         0x0F
+#define AVRC_SUBTYPE_MASK       0xF8
+#define AVRC_SUBTYPE_SHIFT      3
+#define AVRC_SUBID_MASK         0x07
+#define AVRC_SUBID_IGNORE       0x07
+
+#define AVRC_SINGLE_PARAM_SIZE      1
+#define AVRC_METADATA_PKT_TYPE_MASK 0x03
+#define AVRC_PASS_THOUGH_MSG_MASK   0x80           /* MSB of msg_type indicates the PAS THROUGH msg */
+#define AVRC_VENDOR_UNIQUE_MASK     0x70           /* vendor unique id */
+
+
+/* Company ID is 24-bit integer We can not use the macros in bt_types.h */
+#define AVRC_CO_ID_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); }
+#define AVRC_BE_STREAM_TO_CO_ID(u32, p) {u32 = (((UINT32)(*((p) + 2))) + (((UINT32)(*((p) + 1))) << 8) + (((UINT32)(*(p))) << 16)); (p) += 3;}
+
+#define AVRC_AVC_HDR_SIZE           3   /* ctype, subunit*, opcode */
+
+#define AVRC_MIN_META_HDR_SIZE      4   /* pdu id(1), packet type(1), param len(2) */
+#define AVRC_MIN_BROWSE_HDR_SIZE    3   /* pdu id(1), param len(2) */
+
+#define AVRC_VENDOR_HDR_SIZE        6   /* ctype, subunit*, opcode, CO_ID */
+#define AVRC_MSG_VENDOR_OFFSET      23
+#define AVRC_MIN_VENDOR_SIZE        (AVRC_MSG_VENDOR_OFFSET + BT_HDR_SIZE + AVRC_MIN_META_HDR_SIZE)
+
+#define AVRC_PASS_THRU_SIZE         8
+#define AVRC_MSG_PASS_THRU_OFFSET   25
+#define AVRC_MIN_PASS_THRU_SIZE     (AVRC_MSG_PASS_THRU_OFFSET + BT_HDR_SIZE + 4)
+
+#define AVRC_MIN_BROWSE_SIZE        (AVCT_BROWSE_OFFSET + BT_HDR_SIZE + AVRC_MIN_BROWSE_HDR_SIZE)
+
+#define AVRC_CTRL_PKT_LEN(pf, pk)   {pf = (UINT8 *)((pk) + 1) + (pk)->offset + 2;}
+
+#define AVRC_MAX_CTRL_DATA_LEN      (AVRC_PACKET_LEN)
+
+/*****************************************************************************
+**  Type definitions
+*****************************************************************************/
+
+
+typedef struct
+{
+    tAVRC_CONN_CB       ccb[AVCT_NUM_CONN];
+    tAVRC_FIND_CBACK    *p_cback;       /* pointer to application callback */
+    tSDP_DISCOVERY_DB   *p_db;          /* pointer to discovery database */
+    UINT16              service_uuid;   /* service UUID to search */
+    UINT8               trace_level;
+} tAVRC_CB;
+
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+#if AVRC_DYNAMIC_MEMORY == FALSE
+AVRC_API extern tAVRC_CB  avrc_cb;
+#else
+AVRC_API extern tAVRC_CB *avrc_cb_ptr;
+#define avrc_cb (*avrc_cb_ptr)
+#endif
+
+extern BOOLEAN avrc_is_valid_pdu_id(UINT8 pdu_id);
+extern BOOLEAN avrc_is_valid_player_attrib_value(UINT8 attrib, UINT8 value);
+extern BT_HDR * avrc_alloc_ctrl_pkt (UINT8 pdu);
+extern tAVRC_STS avrc_pars_pass_thru(tAVRC_MSG_PASS *p_msg, UINT16 *p_vendor_unique_id);
+extern UINT8 avrc_opcode_from_pdu(UINT8 pdu);
+extern BOOLEAN avrc_is_valid_opcode(UINT8 opcode);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* AVRC_INT_H */
+
diff --git a/stack/avrc/avrc_opt.c b/stack/avrc/avrc_opt.c
new file mode 100644
index 0000000..208a6c2
--- /dev/null
+++ b/stack/avrc/avrc_opt.c
@@ -0,0 +1,230 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  nterface to AVRCP optional commands
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "gki.h"
+#include "avrc_api.h"
+#include "avrc_int.h"
+
+#include "wcassert.h"
+
+
+/******************************************************************************
+**
+** Function         avrc_vendor_msg
+**
+** Description      Compose a VENDOR DEPENDENT command according to p_msg
+**
+**                  Input Parameters:
+**                      p_msg: Pointer to VENDOR DEPENDENT message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          pointer to a valid GKI buffer if successful.
+**                  NULL if p_msg is NULL.
+**
+******************************************************************************/
+static BT_HDR  * avrc_vendor_msg(tAVRC_MSG_VENDOR *p_msg)
+{
+    BT_HDR  *p_cmd;
+    UINT8   *p_data;
+
+    WC_ASSERT(p_msg != NULL);
+
+    WC_ASSERT(AVRC_CMD_POOL_SIZE > (AVRC_MIN_CMD_LEN+p_msg->vendor_len));
+    if ((p_cmd = (BT_HDR *) GKI_getpoolbuf(AVRC_CMD_POOL_ID)) != NULL)
+    {
+        p_cmd->offset   = AVCT_MSG_OFFSET;
+        p_data          = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+        *p_data++       = (p_msg->hdr.ctype & AVRC_CTYPE_MASK);
+        *p_data++       = (p_msg->hdr.subunit_type << AVRC_SUBTYPE_SHIFT) | p_msg->hdr.subunit_id;
+        *p_data++       = AVRC_OP_VENDOR;
+        AVRC_CO_ID_TO_BE_STREAM(p_data, p_msg->company_id);
+        if(p_msg->vendor_len && p_msg->p_vendor_data)
+        {
+            memcpy(p_data, p_msg->p_vendor_data, p_msg->vendor_len);
+        }
+        p_cmd->len  = (UINT16) (p_data + p_msg->vendor_len - (UINT8 *)(p_cmd + 1) - p_cmd->offset);
+        p_cmd->layer_specific   = AVCT_DATA_CTRL;
+    }
+    return p_cmd;
+}
+
+/******************************************************************************
+**
+** Function         AVRC_UnitCmd
+**
+** Description      Send a UNIT INFO command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_UnitCmd(UINT8 handle, UINT8 label)
+{
+    BT_HDR  *p_cmd;
+    UINT8   *p_data;
+
+    if ((p_cmd = (BT_HDR *) GKI_getpoolbuf(AVRC_CMD_POOL_ID)) != NULL)
+    {
+        p_cmd->offset   = AVCT_MSG_OFFSET;
+        p_data          = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+        *p_data++       = AVRC_CMD_STATUS;
+        /* unit & id ignore */
+        *p_data++       = (AVRC_SUB_UNIT << AVRC_SUBTYPE_SHIFT) | AVRC_SUBID_IGNORE;
+        *p_data++       = AVRC_OP_UNIT_INFO;
+        memset(p_data, AVRC_CMD_OPRND_PAD, AVRC_UNIT_OPRND_BYTES);
+        p_cmd->len      = p_data + AVRC_UNIT_OPRND_BYTES - (UINT8 *)(p_cmd + 1) - p_cmd->offset;
+        p_cmd->layer_specific   = AVCT_DATA_CTRL;
+    }
+    return AVCT_MsgReq( handle, label, AVCT_CMD, p_cmd);
+}
+
+/******************************************************************************
+**
+** Function         AVRC_SubCmd
+**
+** Description      Send a SUBUNIT INFO command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      page: Specifies which part of the subunit type table
+**                      is requested.  For AVRCP it is typically zero.
+**                      Value range is 0-7.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_SubCmd(UINT8 handle, UINT8 label, UINT8 page)
+{
+    BT_HDR  *p_cmd;
+    UINT8   *p_data;
+
+    if ((p_cmd = (BT_HDR *) GKI_getpoolbuf(AVRC_CMD_POOL_ID)) != NULL)
+    {
+        p_cmd->offset   = AVCT_MSG_OFFSET;
+        p_data          = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+        *p_data++       = AVRC_CMD_STATUS;
+        /* unit & id ignore */
+        *p_data++       = (AVRC_SUB_UNIT << AVRC_SUBTYPE_SHIFT) | AVRC_SUBID_IGNORE;
+        *p_data++       = AVRC_OP_SUB_INFO;
+        *p_data++       = ((page&AVRC_SUB_PAGE_MASK) << AVRC_SUB_PAGE_SHIFT) | AVRC_SUB_EXT_CODE;
+        memset(p_data, AVRC_CMD_OPRND_PAD, AVRC_SUB_OPRND_BYTES);
+        p_cmd->len      = p_data + AVRC_SUB_OPRND_BYTES - (UINT8 *)(p_cmd + 1) - p_cmd->offset;
+        p_cmd->layer_specific   = AVCT_DATA_CTRL;
+    }
+    return AVCT_MsgReq( handle, label, AVCT_CMD, p_cmd);
+}
+
+/******************************************************************************
+**
+** Function         AVRC_VendorCmd
+**
+** Description      Send a VENDOR DEPENDENT command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      p_msg: Pointer to VENDOR DEPENDENT message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_VendorCmd(UINT8  handle, UINT8  label, tAVRC_MSG_VENDOR *p_msg)
+{
+    BT_HDR *p_buf = avrc_vendor_msg(p_msg);
+    if (p_buf)
+        return AVCT_MsgReq( handle, label, AVCT_CMD, p_buf);
+    else
+        return AVCT_NO_RESOURCES;
+}
+
+
+/******************************************************************************
+**
+** Function         AVRC_VendorRsp
+**
+** Description      Send a VENDOR DEPENDENT response to the peer device.  This
+**                  function can only be called for target role connections.
+**                  This function must be called when a VENDOR DEPENDENT
+**                  command message is received from the peer through the
+**                  tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.  Must be the same value as
+**                      passed with the command message in the callback function.
+**
+**                      p_msg: Pointer to VENDOR DEPENDENT message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+UINT16 AVRC_VendorRsp(UINT8  handle, UINT8  label, tAVRC_MSG_VENDOR *p_msg)
+{
+    BT_HDR *p_buf = avrc_vendor_msg(p_msg);
+    if (p_buf)
+        return AVCT_MsgReq( handle, label, AVCT_RSP, p_buf);
+    else
+        return AVCT_NO_RESOURCES;
+}
+
+
+
diff --git a/stack/avrc/avrc_sdp.c b/stack/avrc/avrc_sdp.c
new file mode 100644
index 0000000..427894c
--- /dev/null
+++ b/stack/avrc/avrc_sdp.c
@@ -0,0 +1,297 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  AVRCP SDP related functions
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "gki.h"
+#include "avrc_api.h"
+#include "avrc_int.h"
+
+/*****************************************************************************
+**  Global data
+*****************************************************************************/
+#if AVRC_DYNAMIC_MEMORY == FALSE
+tAVRC_CB avrc_cb;
+#endif
+
+/* update AVRC_NUM_PROTO_ELEMS if this constant is changed */
+const tSDP_PROTOCOL_ELEM  avrc_proto_list [] =
+{
+    {UUID_PROTOCOL_L2CAP, 1, {AVCT_PSM, 0} },
+    {UUID_PROTOCOL_AVCTP, 1, {AVCT_REV_1_0, 0}  }
+};
+
+
+
+/******************************************************************************
+**
+** Function         avrc_sdp_cback
+**
+** Description      This is the SDP callback function used by A2D_FindService.
+**                  This function will be executed by SDP when the service
+**                  search is completed.  If the search is successful, it
+**                  finds the first record in the database that matches the
+**                  UUID of the search.  Then retrieves various parameters
+**                  from the record.  When it is finished it calls the
+**                  application callback function.
+**
+** Returns          Nothing.
+**
+******************************************************************************/
+static void avrc_sdp_cback(UINT16 status)
+{
+    AVRC_TRACE_API1("avrc_sdp_cback status: %d", status);
+
+    /* reset service_uuid, so can start another find service */
+    avrc_cb.service_uuid = 0;
+
+    /* return info from sdp record in app callback function */
+    (*avrc_cb.p_cback) (status);
+
+    return;
+}
+
+/******************************************************************************
+**
+** Function         AVRC_FindService
+**
+** Description      This function is called by the application to perform service
+**                  discovery and retrieve AVRCP SDP record information from a
+**                  peer device.  Information is returned for the first service
+**                  record found on the server that matches the service UUID.
+**                  The callback function will be executed when service discovery
+**                  is complete.  There can only be one outstanding call to
+**                  AVRC_FindService() at a time; the application must wait for
+**                  the callback before it makes another call to the function.
+**                  The application is responsible for allocating memory for the
+**                  discovery database.  It is recommended that the size of the
+**                  discovery database be at least 300 bytes.  The application
+**                  can deallocate the memory after the callback function has
+**                  executed.
+**
+**                  Input Parameters:
+**                      service_uuid: Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+**                                           or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
+**
+**                      bd_addr:  BD address of the peer device.
+**
+**                      p_db:  SDP discovery database parameters.
+**
+**                      p_cback:  Pointer to the callback function.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_PARAMS if discovery database parameters are invalid.
+**                  AVRC_NO_RESOURCES if there are not enough resources to
+**                                    perform the service search.
+**
+******************************************************************************/
+UINT16 AVRC_FindService(UINT16 service_uuid, BD_ADDR bd_addr,
+                tAVRC_SDP_DB_PARAMS *p_db, tAVRC_FIND_CBACK *p_cback)
+{
+    tSDP_UUID   uuid_list;
+    BOOLEAN     result = TRUE;
+    UINT16      a2d_attr_list[] = {ATTR_ID_SERVICE_CLASS_ID_LIST, /* update AVRC_NUM_ATTR, if changed */
+                                   ATTR_ID_PROTOCOL_DESC_LIST,
+                                   ATTR_ID_BT_PROFILE_DESC_LIST,
+                                   ATTR_ID_SERVICE_NAME,
+                                   ATTR_ID_SUPPORTED_FEATURES,
+                                   ATTR_ID_PROVIDER_NAME};
+
+    AVRC_TRACE_API1("AVRC_FindService uuid: %x", service_uuid);
+    if( (service_uuid != UUID_SERVCLASS_AV_REM_CTRL_TARGET && service_uuid != UUID_SERVCLASS_AV_REMOTE_CONTROL) ||
+        p_db == NULL || p_db->p_db == NULL || p_cback == NULL)
+        return AVRC_BAD_PARAM;
+
+    /* check if it is busy */
+    if( avrc_cb.service_uuid == UUID_SERVCLASS_AV_REM_CTRL_TARGET ||
+        avrc_cb.service_uuid == UUID_SERVCLASS_AV_REMOTE_CONTROL)
+        return AVRC_NO_RESOURCES;
+
+    /* set up discovery database */
+    uuid_list.len = LEN_UUID_16;
+    uuid_list.uu.uuid16 = service_uuid;
+
+    if(p_db->p_attrs == NULL || p_db->num_attr == 0)
+    {
+        p_db->p_attrs  = a2d_attr_list;
+        p_db->num_attr = AVRC_NUM_ATTR;
+    }
+
+    result = SDP_InitDiscoveryDb(p_db->p_db, p_db->db_len, 1, &uuid_list, p_db->num_attr,
+                                 p_db->p_attrs);
+
+    if (result == TRUE)
+    {
+        /* store service_uuid and discovery db pointer */
+        avrc_cb.p_db = p_db->p_db;
+        avrc_cb.service_uuid = service_uuid;
+        avrc_cb.p_cback = p_cback;
+
+        /* perform service search */
+        result = SDP_ServiceSearchAttributeRequest(bd_addr, p_db->p_db, avrc_sdp_cback);
+    }
+
+    return (result ? AVRC_SUCCESS : AVRC_FAIL);
+}
+
+/******************************************************************************
+**
+** Function         AVRC_AddRecord
+**
+** Description      This function is called to build an AVRCP SDP record.
+**                  Prior to calling this function the application must
+**                  call SDP_CreateRecord() to create an SDP record.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+**                                            or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
+**
+**                      p_service_name:  Pointer to a null-terminated character
+**                      string containing the service name.
+**                      If service name is not used set this to NULL.
+**
+**                      p_provider_name:  Pointer to a null-terminated character
+**                      string containing the provider name.
+**                      If provider name is not used set this to NULL.
+**
+**                      categories:  Supported categories.
+**
+**                      sdp_handle:  SDP handle returned by SDP_CreateRecord().
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_NO_RESOURCES if not enough resources to build the SDP record.
+**
+******************************************************************************/
+UINT16 AVRC_AddRecord(UINT16 service_uuid, char *p_service_name,
+                char *p_provider_name, UINT16 categories, UINT32 sdp_handle)
+{
+    UINT16      browse_list[1];
+    BOOLEAN     result = TRUE;
+    UINT8       temp[8];
+    UINT8       *p;
+    UINT16      count = 1;
+    UINT16      class_list[2];
+
+
+    AVRC_TRACE_API1("AVRC_AddRecord uuid: %x", service_uuid);
+
+    if( service_uuid != UUID_SERVCLASS_AV_REM_CTRL_TARGET && service_uuid != UUID_SERVCLASS_AV_REMOTE_CONTROL )
+        return AVRC_BAD_PARAM;
+
+    /* add service class id list */
+    class_list[0] = service_uuid;
+    result &= SDP_AddServiceClassIdList(sdp_handle, count, class_list);
+
+    /* add protocol descriptor list   */
+    result &= SDP_AddProtocolList(sdp_handle, AVRC_NUM_PROTO_ELEMS, (tSDP_PROTOCOL_ELEM *)avrc_proto_list);
+
+    /* add profile descriptor list   */
+    result &= SDP_AddProfileDescriptorList(sdp_handle, UUID_SERVCLASS_AV_REMOTE_CONTROL, AVRC_REV_1_0);
+
+    /* add supported categories */
+    p = temp;
+    UINT16_TO_BE_STREAM(p, categories);
+    result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SUPPORTED_FEATURES, UINT_DESC_TYPE,
+              (UINT32)2, (UINT8*)temp);
+
+    /* add provider name */
+    if (p_provider_name != NULL)
+    {
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_PROVIDER_NAME, TEXT_STR_DESC_TYPE,
+                    (UINT32)(strlen(p_provider_name)+1), (UINT8 *) p_provider_name);
+    }
+
+    /* add service name */
+    if (p_service_name != NULL)
+    {
+        result &= SDP_AddAttribute(sdp_handle, ATTR_ID_SERVICE_NAME, TEXT_STR_DESC_TYPE,
+                    (UINT32)(strlen(p_service_name)+1), (UINT8 *) p_service_name);
+    }
+
+    /* add browse group list */
+    browse_list[0] = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    result &= SDP_AddUuidSequence(sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, browse_list);
+
+
+    return (result ? AVRC_SUCCESS : AVRC_FAIL);
+}
+
+
+
+/******************************************************************************
+**
+** Function         AVRC_SetTraceLevel
+**
+** Description      Sets the trace level for AVRC. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the AVRC tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+UINT8 AVRC_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        avrc_cb.trace_level = new_level;
+
+    return (avrc_cb.trace_level);
+}
+
+/*******************************************************************************
+**
+** Function         AVRC_Init
+**
+** Description      This function is called at stack startup to allocate the
+**                  control block (if using dynamic memory), and initializes the
+**                  control block and tracing level.
+**
+** Returns          void
+**
+*******************************************************************************/
+void AVRC_Init(void)
+{
+    memset(&avrc_cb, 0, sizeof(tAVRC_CB));
+
+#if defined(AVRC_INITIAL_TRACE_LEVEL)
+    avrc_cb.trace_level  = AVRC_INITIAL_TRACE_LEVEL;
+#else
+    avrc_cb.trace_level  = BT_TRACE_LEVEL_NONE;
+#endif
+}
+
diff --git a/stack/bnep/bnep_api.c b/stack/bnep/bnep_api.c
new file mode 100644
index 0000000..fbbf179
--- /dev/null
+++ b/stack/bnep/bnep_api.c
@@ -0,0 +1,781 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the BNEP API code
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bnep_api.h"
+#include "bnep_int.h"
+
+/*******************************************************************************
+**
+** Function         BNEP_Init
+**
+** Description      This function initializes the BNEP unit. It should be called
+**                  before accessing any other APIs to initialize the control block
+**
+** Returns          void
+**
+*******************************************************************************/
+void BNEP_Init (void)
+{
+    memset (&bnep_cb, 0, sizeof (tBNEP_CB));
+
+#if defined(BNEP_INITIAL_TRACE_LEVEL)
+    bnep_cb.trace_level = BNEP_INITIAL_TRACE_LEVEL;
+#else
+    bnep_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+
+    /* Start a timer to read our BD address */
+    btu_start_timer (&bnep_cb.bnep_tle, BTU_TTYPE_BNEP, 2);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Register
+**
+** Description      This function is called by the upper layer to register
+**                  its callbacks with BNEP
+**
+** Parameters:      p_reg_info - contains all callback function pointers
+**
+**
+** Returns          BNEP_SUCCESS        if registered successfully
+**                  BNEP_FAILURE        if connection state callback is missing
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_Register (tBNEP_REGISTER *p_reg_info)
+{
+    /* There should be connection state call back registered */
+    if ((!p_reg_info) || (!(p_reg_info->p_conn_state_cb)))
+        return BNEP_SECURITY_FAIL;
+
+    bnep_cb.p_conn_ind_cb       = p_reg_info->p_conn_ind_cb;
+    bnep_cb.p_conn_state_cb     = p_reg_info->p_conn_state_cb;
+    bnep_cb.p_data_ind_cb       = p_reg_info->p_data_ind_cb;
+    bnep_cb.p_data_buf_cb       = p_reg_info->p_data_buf_cb;
+    bnep_cb.p_filter_ind_cb     = p_reg_info->p_filter_ind_cb;
+    bnep_cb.p_mfilter_ind_cb    = p_reg_info->p_mfilter_ind_cb;
+    bnep_cb.p_tx_data_flow_cb   = p_reg_info->p_tx_data_flow_cb;
+
+    if (bnep_register_with_l2cap ())
+        return BNEP_SECURITY_FAIL;
+
+    bnep_cb.profile_registered  = TRUE;
+    BTM_GetLocalDeviceAddr (bnep_cb.my_bda);
+    return BNEP_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Deregister
+**
+** Description      This function is called by the upper layer to de-register
+**                  its callbacks.
+**
+** Parameters:      void
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BNEP_Deregister (void)
+{
+    /* Clear all the call backs registered */
+    bnep_cb.p_conn_ind_cb       = NULL;
+    bnep_cb.p_conn_state_cb     = NULL;
+    bnep_cb.p_data_ind_cb       = NULL;
+    bnep_cb.p_data_buf_cb       = NULL;
+    bnep_cb.p_filter_ind_cb     = NULL;
+    bnep_cb.p_mfilter_ind_cb    = NULL;
+
+    bnep_cb.profile_registered  = FALSE;
+    L2CA_Deregister (BT_PSM_BNEP);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Connect
+**
+** Description      This function creates a BNEP connection to a remote
+**                  device.
+**
+** Parameters:      p_rem_addr  - BD_ADDR of the peer
+**                  src_uuid    - source uuid for the connection
+**                  dst_uuid    - destination uuid for the connection
+**                  p_handle    - pointer to return the handle for the connection
+**
+** Returns          BNEP_SUCCESS                if connection started
+**                  BNEP_NO_RESOURCES           if no resources
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_Connect (BD_ADDR p_rem_bda,
+                           tBT_UUID *src_uuid,
+                           tBT_UUID *dst_uuid,
+                           UINT16 *p_handle)
+{
+    UINT16          cid;
+    tBNEP_CONN      *p_bcb = bnepu_find_bcb_by_bd_addr (p_rem_bda);
+
+    BNEP_TRACE_API6 ("BNEP_Connect()  BDA: %02x-%02x-%02x-%02x-%02x-%02x",
+                     p_rem_bda[0], p_rem_bda[1], p_rem_bda[2],
+                     p_rem_bda[3], p_rem_bda[4], p_rem_bda[5]);
+
+    if (!bnep_cb.profile_registered)
+        return BNEP_WRONG_STATE;
+
+    /* Both source and destination UUID lengths should be same */
+    if (src_uuid->len != dst_uuid->len)
+        return BNEP_CONN_FAILED_UUID_SIZE;
+
+#if (!defined (BNEP_SUPPORTS_ALL_UUID_LENGTHS) || BNEP_SUPPORTS_ALL_UUID_LENGTHS == FALSE)
+    if (src_uuid->len != 2)
+        return BNEP_CONN_FAILED_UUID_SIZE;
+#endif
+
+    if (!p_bcb)
+    {
+        if ((p_bcb = bnepu_allocate_bcb (p_rem_bda)) == NULL)
+            return (BNEP_NO_RESOURCES);
+    }
+    else if (p_bcb->con_state != BNEP_STATE_CONNECTED)
+            return BNEP_WRONG_STATE;
+    else
+    {
+        /* Backup current UUID values to restore if role change fails */
+        memcpy ((UINT8 *)&(p_bcb->prv_src_uuid), (UINT8 *)&(p_bcb->src_uuid), sizeof (tBT_UUID));
+        memcpy ((UINT8 *)&(p_bcb->prv_dst_uuid), (UINT8 *)&(p_bcb->dst_uuid), sizeof (tBT_UUID));
+    }
+
+    /* We are the originator of this connection */
+    p_bcb->con_flags |= BNEP_FLAGS_IS_ORIG;
+
+    memcpy ((UINT8 *)&(p_bcb->src_uuid), (UINT8 *)src_uuid, sizeof (tBT_UUID));
+    memcpy ((UINT8 *)&(p_bcb->dst_uuid), (UINT8 *)dst_uuid, sizeof (tBT_UUID));
+
+    if (p_bcb->con_state == BNEP_STATE_CONNECTED)
+    {
+        /* Transition to the next appropriate state, waiting for connection confirm. */
+        p_bcb->con_state = BNEP_STATE_SEC_CHECKING;
+
+        BNEP_TRACE_API1 ("BNEP initiating security procedures for src uuid 0x%x",
+            p_bcb->src_uuid.uu.uuid16);
+
+#if (defined (BNEP_DO_AUTH_FOR_ROLE_SWITCH) && BNEP_DO_AUTH_FOR_ROLE_SWITCH == TRUE)
+        btm_sec_mx_access_request (p_bcb->rem_bda, BT_PSM_BNEP, TRUE,
+                                   BTM_SEC_PROTO_BNEP,
+                                   bnep_get_uuid32(src_uuid),
+                                   &bnep_sec_check_complete, p_bcb);
+#else
+        bnep_sec_check_complete (p_bcb->rem_bda, p_bcb, BTM_SUCCESS);
+#endif
+
+    }
+    else
+    {
+        /* Transition to the next appropriate state, waiting for connection confirm. */
+        p_bcb->con_state = BNEP_STATE_CONN_START;
+
+        if ((cid = L2CA_ConnectReq (BT_PSM_BNEP, p_bcb->rem_bda)) != 0)
+        {
+            p_bcb->l2cap_cid = cid;
+
+        }
+        else
+        {
+            BNEP_TRACE_ERROR0 ("BNEP - Originate failed");
+            if (bnep_cb.p_conn_state_cb)
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_FAILED, FALSE);
+            bnepu_release_bcb (p_bcb);
+            return BNEP_CONN_FAILED;
+        }
+
+        /* Start timer waiting for connect */
+        btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_CONN_TIMEOUT);
+    }
+
+    *p_handle = p_bcb->handle;
+    return (BNEP_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_ConnectResp
+**
+** Description      This function is called in responce to connection indication
+**
+**
+** Parameters:      handle  - handle given in the connection indication
+**                  resp    - responce for the connection indication
+**
+** Returns          BNEP_SUCCESS                if connection started
+**                  BNEP_WRONG_HANDLE           if the connection is not found
+**                  BNEP_WRONG_STATE            if the responce is not expected
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_ConnectResp (UINT16 handle, tBNEP_RESULT resp)
+{
+    tBNEP_CONN      *p_bcb;
+    UINT16          resp_code = BNEP_SETUP_CONN_OK;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    if (p_bcb->con_state != BNEP_STATE_CONN_SETUP ||
+        (!(p_bcb->con_flags & BNEP_FLAGS_SETUP_RCVD)))
+        return (BNEP_WRONG_STATE);
+
+    BNEP_TRACE_API2 ("BNEP_ConnectResp()  for handle %d, responce %d", handle, resp);
+
+    /* Form appropriate responce based on profile responce */
+    if      (resp == BNEP_CONN_FAILED_SRC_UUID)   resp_code = BNEP_SETUP_INVALID_SRC_UUID;
+    else if (resp == BNEP_CONN_FAILED_DST_UUID)   resp_code = BNEP_SETUP_INVALID_DEST_UUID;
+    else if (resp == BNEP_CONN_FAILED_UUID_SIZE)  resp_code = BNEP_SETUP_INVALID_UUID_SIZE;
+    else if (resp == BNEP_SUCCESS)                resp_code = BNEP_SETUP_CONN_OK;
+    else                                          resp_code = BNEP_SETUP_CONN_NOT_ALLOWED;
+
+    bnep_send_conn_responce (p_bcb, resp_code);
+    p_bcb->con_flags &= (~BNEP_FLAGS_SETUP_RCVD);
+
+    if (resp == BNEP_SUCCESS)
+        bnep_connected (p_bcb);
+    else if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+    {
+        /* Restore the original parameters */
+        p_bcb->con_state = BNEP_STATE_CONNECTED;
+        p_bcb->con_flags &= (~BNEP_FLAGS_SETUP_RCVD);
+
+        memcpy ((UINT8 *)&(p_bcb->src_uuid), (UINT8 *)&(p_bcb->prv_src_uuid), sizeof (tBT_UUID));
+        memcpy ((UINT8 *)&(p_bcb->dst_uuid), (UINT8 *)&(p_bcb->prv_dst_uuid), sizeof (tBT_UUID));
+    }
+
+    /* Process remaining part of the setup message (extension headers) */
+    if (p_bcb->p_pending_data)
+    {
+        UINT8   extension_present = TRUE, *p, ext_type;
+        UINT16  rem_len;
+
+        rem_len = p_bcb->p_pending_data->len;
+        p       = (UINT8 *)(p_bcb->p_pending_data + 1) + p_bcb->p_pending_data->offset;
+        while (extension_present && p && rem_len)
+        {
+            ext_type = *p++;
+            extension_present = ext_type >> 7;
+            ext_type &= 0x7F;
+
+            /* if unknown extension present stop processing */
+            if (ext_type)
+                break;
+
+            p = bnep_process_control_packet (p_bcb, p, &rem_len, TRUE);
+        }
+
+        GKI_freebuf (p_bcb->p_pending_data);
+        p_bcb->p_pending_data = NULL;
+    }
+    return (BNEP_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Disconnect
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle   - handle of the connection
+**
+** Returns          BNEP_SUCCESS                if connection is disconnected
+**                  BNEP_WRONG_HANDLE           if no connection is not found
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_Disconnect (UINT16 handle)
+{
+    tBNEP_CONN      *p_bcb;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    if (p_bcb->con_state == BNEP_STATE_IDLE)
+        return (BNEP_WRONG_HANDLE);
+
+    BNEP_TRACE_API1 ("BNEP_Disconnect()  for handle %d", handle);
+
+    L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+    bnepu_release_bcb (p_bcb);
+
+    return (BNEP_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_WriteBuf
+**
+** Description      This function sends data in a GKI buffer on BNEP connection
+**
+** Parameters:      handle       - handle of the connection to write
+**                  p_dest_addr  - BD_ADDR/Ethernet addr of the destination
+**                  p_buf        - pointer to address of buffer with data
+**                  protocol     - protocol type of the packet
+**                  p_src_addr   - (optional) BD_ADDR/ethernet address of the source
+**                                 (should be NULL if it is local BD Addr)
+**                  fw_ext_present - forwarded extensions present
+**
+** Returns:         BNEP_WRONG_HANDLE       - if passed handle is not valid
+**                  BNEP_MTU_EXCEDED        - If the data length is greater than MTU
+**                  BNEP_IGNORE_CMD         - If the packet is filtered out
+**                  BNEP_Q_SIZE_EXCEEDED    - If the Tx Q is full
+**                  BNEP_SUCCESS            - If written successfully
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_WriteBuf (UINT16 handle,
+                            UINT8 *p_dest_addr,
+                            BT_HDR *p_buf,
+                            UINT16 protocol,
+                            UINT8 *p_src_addr,
+                            BOOLEAN fw_ext_present)
+{
+    tBNEP_CONN      *p_bcb;
+    UINT8           *p_data;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+    {
+        GKI_freebuf (p_buf);
+        return (BNEP_WRONG_HANDLE);
+    }
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+    /* Check MTU size */
+    if (p_buf->len > BNEP_MTU_SIZE)
+    {
+        BNEP_TRACE_ERROR2 ("BNEP_Write() length %d exceeded MTU %d", p_buf->len, BNEP_MTU_SIZE);
+        GKI_freebuf (p_buf);
+        return (BNEP_MTU_EXCEDED);
+    }
+
+    /* Check if the packet should be filtered out */
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    if (bnep_is_packet_allowed (p_bcb, p_dest_addr, protocol, fw_ext_present, p_data) != BNEP_SUCCESS)
+    {
+        /*
+        ** If packet is filtered and ext headers are present
+        ** drop the data and forward the ext headers
+        */
+        if (fw_ext_present)
+        {
+            UINT8       ext, length;
+            UINT16      org_len, new_len;
+            /* parse the extension headers and findout the new packet len */
+            org_len = p_buf->len;
+            new_len = 0;
+            do {
+
+                ext     = *p_data++;
+                length  = *p_data++;
+                p_data += length;
+
+                new_len += (length + 2);
+
+                if (new_len > org_len)
+                {
+                    GKI_freebuf (p_buf);
+                    return BNEP_IGNORE_CMD;
+                }
+
+            } while (ext & 0x80);
+
+            if (protocol != BNEP_802_1_P_PROTOCOL)
+                protocol = 0;
+            else
+            {
+                new_len += 4;
+                p_data[2] = 0;
+                p_data[3] = 0;
+            }
+            p_buf->len  = new_len;
+        }
+        else
+        {
+            GKI_freebuf (p_buf);
+            return BNEP_IGNORE_CMD;
+        }
+    }
+
+    /* Check transmit queue */
+    if (p_bcb->xmit_q.count >= BNEP_MAX_XMITQ_DEPTH)
+    {
+        GKI_freebuf (p_buf);
+        return (BNEP_Q_SIZE_EXCEEDED);
+    }
+
+    /* Build the BNEP header */
+    bnepu_build_bnep_hdr (p_bcb, p_buf, protocol, p_src_addr, p_dest_addr, fw_ext_present);
+
+    /* Send the data or queue it up */
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+    return (BNEP_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Write
+**
+** Description      This function sends data over a BNEP connection
+**
+** Parameters:      handle       - handle of the connection to write
+**                  p_dest_addr  - BD_ADDR/Ethernet addr of the destination
+**                  p_data       - pointer to data start
+**                  protocol     - protocol type of the packet
+**                  p_src_addr   - (optional) BD_ADDR/ethernet address of the source
+**                                 (should be NULL if it is local BD Addr)
+**                  fw_ext_present - forwarded extensions present
+**
+** Returns:         BNEP_WRONG_HANDLE       - if passed handle is not valid
+**                  BNEP_MTU_EXCEDED        - If the data length is greater than MTU
+**                  BNEP_IGNORE_CMD         - If the packet is filtered out
+**                  BNEP_Q_SIZE_EXCEEDED    - If the Tx Q is full
+**                  BNEP_NO_RESOURCES       - If not able to allocate a buffer
+**                  BNEP_SUCCESS            - If written successfully
+**
+*******************************************************************************/
+tBNEP_RESULT  BNEP_Write (UINT16 handle,
+                          UINT8 *p_dest_addr,
+                          UINT8 *p_data,
+                          UINT16 len,
+                          UINT16 protocol,
+                          UINT8 *p_src_addr,
+                          BOOLEAN fw_ext_present)
+{
+    BT_HDR       *p_buf;
+    tBNEP_CONN   *p_bcb;
+    UINT8        *p;
+
+    /* Check MTU size. Consider the possibility of having extension headers */
+    if (len > BNEP_MTU_SIZE)
+    {
+        BNEP_TRACE_ERROR2 ("BNEP_Write() length %d exceeded MTU %d", len, BNEP_MTU_SIZE);
+        return (BNEP_MTU_EXCEDED);
+    }
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    /* Check if the packet should be filtered out */
+    if (bnep_is_packet_allowed (p_bcb, p_dest_addr, protocol, fw_ext_present, p_data) != BNEP_SUCCESS)
+    {
+        /*
+        ** If packet is filtered and ext headers are present
+        ** drop the data and forward the ext headers
+        */
+        if (fw_ext_present)
+        {
+            UINT8       ext, length;
+            UINT16      org_len, new_len;
+            /* parse the extension headers and findout the new packet len */
+            org_len = len;
+            new_len = 0;
+            p       = p_data;
+            do {
+
+                ext     = *p_data++;
+                length  = *p_data++;
+                p_data += length;
+
+                new_len += (length + 2);
+
+                if (new_len > org_len)
+                    return BNEP_IGNORE_CMD;
+
+            } while (ext & 0x80);
+
+            if (protocol != BNEP_802_1_P_PROTOCOL)
+                protocol = 0;
+            else
+            {
+                new_len += 4;
+                p_data[2] = 0;
+                p_data[3] = 0;
+            }
+            len         = new_len;
+            p_data      = p;
+        }
+        else
+            return BNEP_IGNORE_CMD;
+    }
+
+    /* Check transmit queue */
+    if (p_bcb->xmit_q.count >= BNEP_MAX_XMITQ_DEPTH)
+        return (BNEP_Q_SIZE_EXCEEDED);
+
+    /* Get a buffer to copy teh data into */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP_Write() not able to get buffer");
+        return (BNEP_NO_RESOURCES);
+    }
+
+    p_buf->len = len;
+    p_buf->offset = BNEP_MINIMUM_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + BNEP_MINIMUM_OFFSET;
+
+    memcpy (p, p_data, len);
+
+    /* Build the BNEP header */
+    bnepu_build_bnep_hdr (p_bcb, p_buf, protocol, p_src_addr, p_dest_addr, fw_ext_present);
+
+    /* Send the data or queue it up */
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+    return (BNEP_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_SetProtocolFilters
+**
+** Description      This function sets the protocol filters on peer device
+**
+** Parameters:      handle        - Handle for the connection
+**                  num_filters   - total number of filter ranges
+**                  p_start_array - Array of beginings of all protocol ranges
+**                  p_end_array   - Array of ends of all protocol ranges
+**
+** Returns          BNEP_WRONG_HANDLE           - if the connection handle is not valid
+**                  BNEP_SET_FILTER_FAIL        - if the connection is in wrong state
+**                  BNEP_TOO_MANY_FILTERS       - if too many filters
+**                  BNEP_SUCCESS                - if request sent successfully
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_SetProtocolFilters (UINT16 handle,
+                                      UINT16 num_filters,
+                                      UINT16 *p_start_array,
+                                      UINT16 *p_end_array)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    UINT16          xx;
+    tBNEP_CONN     *p_bcb;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    /* Check the connection state */
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+        return (BNEP_WRONG_STATE);
+
+    /* Validate the parameters */
+    if (num_filters && (!p_start_array || !p_end_array))
+        return (BNEP_SET_FILTER_FAIL);
+
+    if (num_filters > BNEP_MAX_PROT_FILTERS)
+        return (BNEP_TOO_MANY_FILTERS);
+
+    /* Fill the filter values in connnection block */
+    for (xx = 0; xx < num_filters; xx++)
+    {
+        p_bcb->sent_prot_filter_start[xx] = *p_start_array++;
+        p_bcb->sent_prot_filter_end[xx]   = *p_end_array++;
+    }
+
+    p_bcb->sent_num_filters = num_filters;
+
+    bnepu_send_peer_our_filters (p_bcb);
+
+    return (BNEP_SUCCESS);
+#else
+    return (BNEP_SET_FILTER_FAIL);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_SetMulticastFilters
+**
+** Description      This function sets the filters for multicast addresses for BNEP.
+**
+** Parameters:      handle        - Handle for the connection
+**                  num_filters   - total number of filter ranges
+**                  p_start_array - Pointer to sequence of beginings of all
+**                                         multicast address ranges
+**                  p_end_array   - Pointer to sequence of ends of all
+**                                         multicast address ranges
+**
+** Returns          BNEP_WRONG_HANDLE           - if the connection handle is not valid
+**                  BNEP_SET_FILTER_FAIL        - if the connection is in wrong state
+**                  BNEP_TOO_MANY_FILTERS       - if too many filters
+**                  BNEP_SUCCESS                - if request sent successfully
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_SetMulticastFilters (UINT16 handle,
+                                       UINT16 num_filters,
+                                       UINT8 *p_start_array,
+                                       UINT8 *p_end_array)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    UINT16          xx;
+    tBNEP_CONN     *p_bcb;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    /* Check the connection state */
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+        return (BNEP_WRONG_STATE);
+
+    /* Validate the parameters */
+    if (num_filters && (!p_start_array || !p_end_array))
+        return (BNEP_SET_FILTER_FAIL);
+
+    if (num_filters > BNEP_MAX_MULTI_FILTERS)
+        return (BNEP_TOO_MANY_FILTERS);
+
+    /* Fill the multicast filter values in connnection block */
+    for (xx = 0; xx < num_filters; xx++)
+    {
+        memcpy (p_bcb->sent_mcast_filter_start[xx], p_start_array, BD_ADDR_LEN);
+        memcpy (p_bcb->sent_mcast_filter_end[xx], p_end_array, BD_ADDR_LEN);
+
+        p_start_array += BD_ADDR_LEN;
+        p_end_array   += BD_ADDR_LEN;
+    }
+
+    p_bcb->sent_mcast_filters = num_filters;
+
+    bnepu_send_peer_our_multi_filters (p_bcb);
+
+    return (BNEP_SUCCESS);
+#else
+    return (BNEP_SET_FILTER_FAIL);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_GetMyBdAddr
+**
+** Description      This function returns a pointer to the local device BD address.
+**                  If the BD address has not been read yet, it returns NULL.
+**
+** Returns          the BD address
+**
+*******************************************************************************/
+UINT8 *BNEP_GetMyBdAddr (void)
+{
+    if (bnep_cb.got_my_bd_addr)
+        return (bnep_cb.my_bda);
+    else
+        return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         BNEP_SetTraceLevel
+**
+** Description      This function sets the trace level for BNEP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 BNEP_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        bnep_cb.trace_level = new_level;
+
+    return (bnep_cb.trace_level);
+}
+
+
+/*******************************************************************************
+**
+** Function         BNEP_GetStatus
+**
+** Description      This function gets the status information for BNEP connection
+**
+** Returns          BNEP_SUCCESS            - if the status is available
+**                  BNEP_NO_RESOURCES       - if no structure is passed for output
+**                  BNEP_WRONG_HANDLE       - if the handle is invalid
+**                  BNEP_WRONG_STATE        - if not in connected state
+**
+*******************************************************************************/
+tBNEP_RESULT BNEP_GetStatus (UINT16 handle, tBNEP_STATUS *p_status)
+{
+#if (defined (BNEP_SUPPORTS_STATUS_API) && BNEP_SUPPORTS_STATUS_API == TRUE)
+    tBNEP_CONN     *p_bcb;
+
+    if (!p_status)
+        return BNEP_NO_RESOURCES;
+
+    if ((!handle) || (handle > BNEP_MAX_CONNECTIONS))
+        return (BNEP_WRONG_HANDLE);
+
+    p_bcb = &(bnep_cb.bcb[handle - 1]);
+
+    memset (p_status, 0, sizeof (tBNEP_STATUS));
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+        return BNEP_WRONG_STATE;
+
+    /* Read the status parameters from the connection control block */
+    p_status->con_status            = BNEP_STATUS_CONNECTED;
+    p_status->l2cap_cid             = p_bcb->l2cap_cid;
+    p_status->rem_mtu_size          = p_bcb->rem_mtu_size;
+    p_status->xmit_q_depth          = p_bcb->xmit_q.count;
+    p_status->sent_num_filters      = p_bcb->sent_num_filters;
+    p_status->sent_mcast_filters    = p_bcb->sent_mcast_filters;
+    p_status->rcvd_num_filters      = p_bcb->rcvd_num_filters;
+    p_status->rcvd_mcast_filters    = p_bcb->rcvd_mcast_filters;
+
+    memcpy (p_status->rem_bda, p_bcb->rem_bda, BD_ADDR_LEN);
+    memcpy (&(p_status->src_uuid), &(p_bcb->src_uuid), sizeof (tBT_UUID));
+    memcpy (&(p_status->dst_uuid), &(p_bcb->dst_uuid), sizeof (tBT_UUID));
+
+    return BNEP_SUCCESS;
+#else
+    return (BNEP_IGNORE_CMD);
+#endif
+}
+
+
diff --git a/stack/bnep/bnep_int.h b/stack/bnep/bnep_int.h
new file mode 100644
index 0000000..528c809
--- /dev/null
+++ b/stack/bnep/bnep_int.h
@@ -0,0 +1,251 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains internally used BNEP definitions
+ *
+ ******************************************************************************/
+
+#ifndef  BNEP_INT_H
+#define  BNEP_INT_H
+
+#include "bt_target.h"
+#include "gki.h"
+#include "bnep_api.h"
+#include "btm_int.h"
+#include "btu.h"
+
+
+/* BNEP frame types
+*/
+#define BNEP_FRAME_GENERAL_ETHERNET                 0x00
+#define BNEP_FRAME_CONTROL                          0x01
+#define BNEP_FRAME_COMPRESSED_ETHERNET              0x02
+#define BNEP_FRAME_COMPRESSED_ETHERNET_SRC_ONLY     0x03
+#define BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY    0x04
+
+
+/* BNEP filter control message types
+*/
+#define BNEP_CONTROL_COMMAND_NOT_UNDERSTOOD         0x00
+#define BNEP_SETUP_CONNECTION_REQUEST_MSG           0x01
+#define BNEP_SETUP_CONNECTION_RESPONSE_MSG          0x02
+#define BNEP_FILTER_NET_TYPE_SET_MSG                0x03
+#define BNEP_FILTER_NET_TYPE_RESPONSE_MSG           0x04
+#define BNEP_FILTER_MULTI_ADDR_SET_MSG              0x05
+#define BNEP_FILTER_MULTI_ADDR_RESPONSE_MSG         0x06
+
+
+/* BNEP header extension types
+*/
+#define BNEP_EXTENSION_FILTER_CONTROL   0x00
+
+
+/* BNEP Setup Connection response codes
+*/
+#define BNEP_SETUP_CONN_OK              0x0000
+#define BNEP_SETUP_INVALID_DEST_UUID    0x0001
+#define BNEP_SETUP_INVALID_SRC_UUID     0x0002
+#define BNEP_SETUP_INVALID_UUID_SIZE    0x0003
+#define BNEP_SETUP_CONN_NOT_ALLOWED     0x0004
+
+
+/* BNEP filter control response codes
+*/
+#define BNEP_FILTER_CRL_OK              0x0000
+#define BNEP_FILTER_CRL_UNSUPPORTED     0x0001
+#define BNEP_FILTER_CRL_BAD_RANGE       0x0002
+#define BNEP_FILTER_CRL_MAX_REACHED     0x0003
+#define BNEP_FILTER_CRL_SECURITY_ERR    0x0004
+
+
+/* 802.1p protocol packet will have actual protocol field in side the payload */
+#define BNEP_802_1_P_PROTOCOL           0x8100
+
+/* Timeout definitions.
+*/
+#define BNEP_CONN_TIMEOUT           20               /* Connection related timeout */
+#define BNEP_HOST_TIMEOUT           200              /* host responce timeout */
+#define BNEP_FILTER_SET_TIMEOUT     10
+
+/* Define the Out-Flow default values. */
+#define  BNEP_OFLOW_QOS_FLAG                 0
+#define  BNEP_OFLOW_SERV_TYPE                0
+#define  BNEP_OFLOW_TOKEN_RATE               0
+#define  BNEP_OFLOW_TOKEN_BUCKET_SIZE        0
+#define  BNEP_OFLOW_PEAK_BANDWIDTH           0
+#define  BNEP_OFLOW_LATENCY                  0
+#define  BNEP_OFLOW_DELAY_VARIATION          0
+
+/* Define the In-Flow default values. */
+#define  BNEP_IFLOW_QOS_FLAG                 0
+#define  BNEP_IFLOW_SERV_TYPE                0
+#define  BNEP_IFLOW_TOKEN_RATE               0
+#define  BNEP_IFLOW_TOKEN_BUCKET_SIZE        0
+#define  BNEP_IFLOW_PEAK_BANDWIDTH           0
+#define  BNEP_IFLOW_LATENCY                  0
+#define  BNEP_IFLOW_DELAY_VARIATION          0
+
+#define BNEP_FLUSH_TO                       0xFFFF
+
+#define BNEP_MAX_RETRANSMITS                 3
+
+/* Define the BNEP Connection Control Block
+*/
+typedef struct
+{
+#define BNEP_STATE_IDLE              0
+#define BNEP_STATE_CONN_START        1
+#define BNEP_STATE_CFG_SETUP         2
+#define BNEP_STATE_CONN_SETUP        3
+#define BNEP_STATE_SEC_CHECKING      4
+#define BNEP_STATE_SETUP_RCVD        5
+#define BNEP_STATE_CONNECTED         6
+    UINT8             con_state;
+
+#define BNEP_FLAGS_IS_ORIG           0x01
+#define BNEP_FLAGS_HIS_CFG_DONE      0x02
+#define BNEP_FLAGS_MY_CFG_DONE       0x04
+#define BNEP_FLAGS_L2CAP_CONGESTED   0x08
+#define BNEP_FLAGS_FILTER_RESP_PEND  0x10
+#define BNEP_FLAGS_MULTI_RESP_PEND   0x20
+#define BNEP_FLAGS_SETUP_RCVD        0x40
+#define BNEP_FLAGS_CONN_COMPLETED    0x80
+    UINT8             con_flags;
+    BT_HDR            *p_pending_data;
+
+    UINT16            l2cap_cid;
+    BD_ADDR           rem_bda;
+    UINT16            rem_mtu_size;
+    TIMER_LIST_ENT    conn_tle;
+    BUFFER_Q          xmit_q;
+
+    UINT16            sent_num_filters;
+    UINT16            sent_prot_filter_start[BNEP_MAX_PROT_FILTERS];
+    UINT16            sent_prot_filter_end[BNEP_MAX_PROT_FILTERS];
+
+    UINT16            sent_mcast_filters;
+    BD_ADDR           sent_mcast_filter_start[BNEP_MAX_MULTI_FILTERS];
+    BD_ADDR           sent_mcast_filter_end[BNEP_MAX_MULTI_FILTERS];
+
+    UINT16            rcvd_num_filters;
+    UINT16            rcvd_prot_filter_start[BNEP_MAX_PROT_FILTERS];
+    UINT16            rcvd_prot_filter_end[BNEP_MAX_PROT_FILTERS];
+
+    UINT16            rcvd_mcast_filters;
+    BD_ADDR           rcvd_mcast_filter_start[BNEP_MAX_MULTI_FILTERS];
+    BD_ADDR           rcvd_mcast_filter_end[BNEP_MAX_MULTI_FILTERS];
+
+    UINT16            bad_pkts_rcvd;
+    UINT8             re_transmits;
+    UINT16            handle;
+    tBT_UUID          prv_src_uuid;
+    tBT_UUID          prv_dst_uuid;
+    tBT_UUID          src_uuid;
+    tBT_UUID          dst_uuid;
+
+} tBNEP_CONN;
+
+
+/*  The main BNEP control block
+*/
+typedef struct
+{
+    tL2CAP_CFG_INFO         l2cap_my_cfg;                   /* My L2CAP config     */
+    tBNEP_CONN              bcb[BNEP_MAX_CONNECTIONS];
+
+    tBNEP_CONNECT_IND_CB    *p_conn_ind_cb;
+    tBNEP_CONN_STATE_CB     *p_conn_state_cb;
+    tBNEP_DATA_IND_CB       *p_data_ind_cb;
+    tBNEP_DATA_BUF_CB       *p_data_buf_cb;
+    tBNEP_FILTER_IND_CB     *p_filter_ind_cb;
+    tBNEP_MFILTER_IND_CB    *p_mfilter_ind_cb;
+    tBNEP_TX_DATA_FLOW_CB   *p_tx_data_flow_cb;
+
+    tL2CAP_APPL_INFO        reg_info;
+
+    TIMER_LIST_ENT          bnep_tle;
+    BOOLEAN                 profile_registered;             /* TRUE when we got our BD addr */
+    UINT8                   trace_level;
+    BOOLEAN                 got_my_bd_addr;         /* TRUE when we got our BD addr */
+    BD_ADDR                 my_bda;                 /* BD Address of this device    */
+
+} tBNEP_CB;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Global BNEP data
+*/
+#if BNEP_DYNAMIC_MEMORY == FALSE
+BNEP_API extern tBNEP_CB  bnep_cb;
+#else
+BNEP_API extern tBNEP_CB  *bnep_cb_ptr;
+#define bnep_cb (*bnep_cb_ptr)
+#endif
+
+/* Functions provided by bnep_main.c
+*/
+extern tBNEP_RESULT bnep_register_with_l2cap (void);
+extern void        bnep_disconnect (tBNEP_CONN *p_bcb, UINT16 reason);
+extern tBNEP_CONN *bnep_conn_originate (UINT8 *p_bd_addr);
+extern void        bnep_process_timeout (TIMER_LIST_ENT *p_tle);
+extern void        bnep_connected (tBNEP_CONN *p_bcb);
+
+
+/* Functions provided by bnep_utils.c
+*/
+extern tBNEP_CONN *bnepu_find_bcb_by_cid (UINT16 cid);
+extern tBNEP_CONN *bnepu_find_bcb_by_bd_addr (UINT8 *p_bda);
+extern tBNEP_CONN *bnepu_allocate_bcb (BD_ADDR p_rem_bda);
+extern void        bnepu_release_bcb (tBNEP_CONN *p_bcb);
+extern void        bnepu_send_peer_our_filters (tBNEP_CONN *p_bcb);
+extern void        bnepu_send_peer_our_multi_filters (tBNEP_CONN *p_bcb);
+extern BOOLEAN     bnepu_does_dest_support_prot (tBNEP_CONN *p_bcb, UINT16 protocol);
+extern void        bnepu_build_bnep_hdr (tBNEP_CONN *p_bcb, BT_HDR *p_buf, UINT16 protocol,
+                                         UINT8 *p_src_addr, UINT8 *p_dest_addr, BOOLEAN ext_bit);
+extern void        test_bnepu_build_bnep_hdr (tBNEP_CONN *p_bcb, BT_HDR *p_buf, UINT16 protocol,
+                                         UINT8 *p_src_addr, UINT8 *p_dest_addr, UINT8 type);
+
+extern tBNEP_CONN *bnepu_get_route_to_dest (UINT8 *p_bda);
+extern void        bnepu_check_send_packet (tBNEP_CONN *p_bcb, BT_HDR *p_buf);
+extern void        bnep_send_command_not_understood (tBNEP_CONN *p_bcb, UINT8 cmd_code);
+extern void        bnepu_process_peer_filter_set (tBNEP_CONN *p_bcb, UINT8 *p_filters, UINT16 len);
+extern void        bnepu_process_peer_filter_rsp (tBNEP_CONN *p_bcb, UINT8 *p_data);
+extern void        bnepu_process_multicast_filter_rsp (tBNEP_CONN *p_bcb, UINT8 *p_data);
+extern void        bnep_send_conn_req (tBNEP_CONN *p_bcb);
+extern void        bnep_send_conn_responce (tBNEP_CONN *p_bcb, UINT16 resp_code);
+extern void        bnep_process_setup_conn_req (tBNEP_CONN *p_bcb, UINT8 *p_setup, UINT8 len);
+extern void        bnep_process_setup_conn_responce (tBNEP_CONN *p_bcb, UINT8 *p_setup);
+extern UINT8       *bnep_process_control_packet (tBNEP_CONN *p_bcb, UINT8 *p, UINT16 *len, BOOLEAN is_ext);
+extern void        bnep_sec_check_complete (BD_ADDR bd_addr, void *p_ref_data, UINT8 result);
+extern tBNEP_RESULT bnep_is_packet_allowed (tBNEP_CONN *p_bcb, BD_ADDR p_dest_addr, UINT16 protocol, BOOLEAN fw_ext_present, UINT8 *p_data);
+extern UINT32      bnep_get_uuid32 (tBT_UUID *src_uuid);
+extern void        bnep_dump_status (void);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
+
diff --git a/stack/bnep/bnep_main.c b/stack/bnep/bnep_main.c
new file mode 100644
index 0000000..12c9da0
--- /dev/null
+++ b/stack/bnep/bnep_main.c
@@ -0,0 +1,838 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main BNEP functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "l2c_api.h"
+#include "l2cdefs.h"
+
+#include "btu.h"
+#include "btm_api.h"
+
+#include "bnep_api.h"
+#include "bnep_int.h"
+
+
+/********************************************************************************/
+/*                       G L O B A L    B N E P       D A T A                   */
+/********************************************************************************/
+#if BNEP_DYNAMIC_MEMORY == FALSE
+tBNEP_CB   bnep_cb;
+#endif
+
+const UINT16 bnep_frame_hdr_sizes[] = {14, 1, 2, 8, 8};
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void bnep_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id);
+static void bnep_connect_cfm (UINT16 l2cap_cid, UINT16 result);
+static void bnep_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void bnep_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void bnep_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed);
+static void bnep_disconnect_cfm (UINT16 l2cap_cid, UINT16 result);
+static void bnep_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg);
+static void bnep_congestion_ind (UINT16 lcid, BOOLEAN is_congested);
+
+static void bnep_read_addr_cb (void *p_bda);
+
+
+/*******************************************************************************
+**
+** Function         bnep_register_with_l2cap
+**
+** Description      This function registers BNEP PSM with L2CAP
+**
+** Returns          void
+**
+*******************************************************************************/
+tBNEP_RESULT bnep_register_with_l2cap (void)
+{
+    /* Initialize the L2CAP configuration. We only care about MTU and flush */
+    memset(&bnep_cb.l2cap_my_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+
+    bnep_cb.l2cap_my_cfg.mtu_present            = TRUE;
+    bnep_cb.l2cap_my_cfg.mtu                    = BNEP_MTU_SIZE;
+    bnep_cb.l2cap_my_cfg.flush_to_present       = TRUE;
+    bnep_cb.l2cap_my_cfg.flush_to               = BNEP_FLUSH_TO;
+
+    bnep_cb.reg_info.pL2CA_ConnectInd_Cb        = bnep_connect_ind;
+    bnep_cb.reg_info.pL2CA_ConnectCfm_Cb        = bnep_connect_cfm;
+    bnep_cb.reg_info.pL2CA_ConfigInd_Cb         = bnep_config_ind;
+    bnep_cb.reg_info.pL2CA_ConfigCfm_Cb         = bnep_config_cfm;
+    bnep_cb.reg_info.pL2CA_DisconnectInd_Cb     = bnep_disconnect_ind;
+    bnep_cb.reg_info.pL2CA_DisconnectCfm_Cb     = bnep_disconnect_cfm;
+    bnep_cb.reg_info.pL2CA_DataInd_Cb           = bnep_data_ind;
+    bnep_cb.reg_info.pL2CA_CongestionStatus_Cb  = bnep_congestion_ind;
+
+    /* Now, register with L2CAP */
+    if (!L2CA_Register (BT_PSM_BNEP, &bnep_cb.reg_info))
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - Registration failed");
+        return BNEP_SECURITY_FAIL;
+    }
+
+    return BNEP_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_connect_ind
+**
+** Description      This function handles an inbound connection indication
+**                  from L2CAP. This is the case where we are acting as a
+**                  server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id)
+{
+    tBNEP_CONN    *p_bcb = bnepu_find_bcb_by_bd_addr (bd_addr);
+
+    /* If we are not acting as server, or already have a connection, or have */
+    /* no more resources to handle the connection, reject the connection.    */
+    if (!(bnep_cb.profile_registered) || (p_bcb)
+     || ((p_bcb = bnepu_allocate_bcb(bd_addr)) == NULL))
+    {
+        L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_NO_PSM, 0);
+        return;
+    }
+
+    /* Transition to the next appropriate state, waiting for config setup. */
+    p_bcb->con_state = BNEP_STATE_CFG_SETUP;
+
+    /* Save the L2CAP Channel ID. */
+    p_bcb->l2cap_cid = l2cap_cid;
+
+    /* Send response to the L2CAP layer. */
+    L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK);
+
+    /* Send a Configuration Request. */
+    L2CA_ConfigReq (l2cap_cid, &bnep_cb.l2cap_my_cfg);
+
+    /* Start timer waiting for config setup */
+    btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_CONN_TIMEOUT);
+
+    BNEP_TRACE_EVENT1("BNEP - Rcvd L2CAP conn ind, CID: 0x%x", p_bcb->l2cap_cid);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_connect_cfm
+**
+** Description      This function handles the connect confirm events
+**                  from L2CAP. This is the case when we are acting as a
+**                  client and have sent a connect request.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_connect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    tBNEP_CONN    *bcb;
+
+    /* Find CCB based on CID */
+    if ((bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd conn cnf for unknown CID 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* If the connection response contains success status, then */
+    /* Transition to the next state and startup the timer.      */
+    if ((result == L2CAP_CONN_OK) && (bcb->con_state == BNEP_STATE_CONN_START))
+    {
+        bcb->con_state = BNEP_STATE_CFG_SETUP;
+
+        /* Send a Configuration Request. */
+        L2CA_ConfigReq (l2cap_cid, &bnep_cb.l2cap_my_cfg);
+
+        /* Start timer waiting for config results */
+        btu_start_timer (&bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_CONN_TIMEOUT);
+
+        BNEP_TRACE_EVENT1 ("BNEP - got conn cnf, sent cfg req, CID: 0x%x", bcb->l2cap_cid);
+    }
+    else
+    {
+        BNEP_TRACE_WARNING2 ("BNEP - Rcvd conn cnf with error: 0x%x  CID 0x%x", result, bcb->l2cap_cid);
+
+        /* Tell the upper layer, if he has a callback */
+        if (bnep_cb.p_conn_state_cb &&
+            bcb->con_flags & BNEP_FLAGS_IS_ORIG)
+        {
+            (*bnep_cb.p_conn_state_cb) (bcb->handle, bcb->rem_bda, BNEP_CONN_FAILED, FALSE);
+        }
+
+        bnepu_release_bcb (bcb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         bnep_config_ind
+**
+** Description      This function processes the L2CAP configuration indication
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tBNEP_CONN    *p_bcb;
+    UINT16        result, mtu = 0;
+
+    /* Find CCB based on CID */
+    if ((p_bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    BNEP_TRACE_EVENT1 ("BNEP - Rcvd cfg ind, CID: 0x%x", l2cap_cid);
+
+    /* Remember the remote MTU size */
+    if ((!p_cfg->mtu_present) || (p_cfg->mtu < BNEP_MIN_MTU_SIZE))
+    {
+        mtu                     = p_cfg->mtu;
+        p_cfg->flush_to_present = FALSE;
+        p_cfg->mtu_present      = TRUE;
+        p_cfg->mtu              = BNEP_MIN_MTU_SIZE;
+        p_cfg->result           = result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+    }
+    else
+    {
+        if (p_cfg->mtu > BNEP_MTU_SIZE)
+            p_bcb->rem_mtu_size = BNEP_MTU_SIZE;
+        else
+            p_bcb->rem_mtu_size = p_cfg->mtu;
+
+        /* For now, always accept configuration from the other side */
+        p_cfg->flush_to_present = FALSE;
+        p_cfg->mtu_present      = FALSE;
+        p_cfg->result           = result = L2CAP_CFG_OK;
+    }
+
+    L2CA_ConfigRsp (l2cap_cid, p_cfg);
+
+    if (result != L2CAP_CFG_OK)
+    {
+        BNEP_TRACE_EVENT2 ("BNEP - Rcvd cfg ind with bad MTU %d, CID: 0x%x", mtu, l2cap_cid);
+        return;
+    }
+
+    p_bcb->con_flags |= BNEP_FLAGS_HIS_CFG_DONE;
+
+    if (p_bcb->con_flags & BNEP_FLAGS_MY_CFG_DONE)
+    {
+        p_bcb->con_state = BNEP_STATE_SEC_CHECKING;
+
+        /* Start timer waiting for setup or response */
+        btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_HOST_TIMEOUT);
+
+        if (p_bcb->con_flags & BNEP_FLAGS_IS_ORIG)
+        {
+            btm_sec_mx_access_request (p_bcb->rem_bda, BT_PSM_BNEP, TRUE,
+                                       BTM_SEC_PROTO_BNEP,
+                                       bnep_get_uuid32(&(p_bcb->src_uuid)),
+                                       &bnep_sec_check_complete, p_bcb);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_config_cfm
+**
+** Description      This function processes the L2CAP configuration confirmation
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tBNEP_CONN    *p_bcb;
+
+    BNEP_TRACE_EVENT2 ("BNEP - Rcvd cfg cfm, CID: 0x%x  Result: %d", l2cap_cid, p_cfg->result);
+
+    /* Find CCB based on CID */
+    if ((p_bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* For now, always accept configuration from the other side */
+    if (p_cfg->result == L2CAP_CFG_OK)
+    {
+        p_bcb->con_flags |= BNEP_FLAGS_MY_CFG_DONE;
+
+        if (p_bcb->con_flags & BNEP_FLAGS_HIS_CFG_DONE)
+        {
+            p_bcb->con_state = BNEP_STATE_SEC_CHECKING;
+
+            /* Start timer waiting for setup or response */
+            btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_HOST_TIMEOUT);
+
+            if (p_bcb->con_flags & BNEP_FLAGS_IS_ORIG)
+            {
+                btm_sec_mx_access_request (p_bcb->rem_bda, BT_PSM_BNEP, TRUE,
+                                           BTM_SEC_PROTO_BNEP,
+                                           bnep_get_uuid32(&(p_bcb->src_uuid)),
+                                           &bnep_sec_check_complete, p_bcb);
+            }
+        }
+    }
+    else
+    {
+        /* Tell the upper layer, if he has a callback */
+        if ((p_bcb->con_flags & BNEP_FLAGS_IS_ORIG) && (bnep_cb.p_conn_state_cb))
+        {
+            (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_FAILED_CFG, FALSE);
+        }
+
+        L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+        bnepu_release_bcb (p_bcb);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_disconnect_ind
+**
+** Description      This function handles a disconnect event from L2CAP. If
+**                  requested to, we ack the disconnect before dropping the CCB
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed)
+{
+    tBNEP_CONN    *p_bcb;
+
+    if (ack_needed)
+        L2CA_DisconnectRsp (l2cap_cid);
+
+    /* Find CCB based on CID */
+    if ((p_bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd L2CAP disc, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    BNEP_TRACE_EVENT1 ("BNEP - Rcvd L2CAP disc, CID: 0x%x", l2cap_cid);
+
+    /* Tell the user if he has a callback */
+    if (p_bcb->con_state == BNEP_STATE_CONNECTED)
+    {
+        if (bnep_cb.p_conn_state_cb)
+            (*bnep_cb.p_conn_state_cb)(p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_DISCONNECTED, FALSE);
+    }
+    else
+    {
+        if (((p_bcb->con_flags & BNEP_FLAGS_IS_ORIG) && (bnep_cb.p_conn_state_cb)) ||
+            p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+            (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_FAILED, FALSE);
+    }
+
+    bnepu_release_bcb (p_bcb);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_disconnect_cfm
+**
+** Description      This function gets the disconnect confirm event from L2CAP
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_disconnect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    BNEP_TRACE_EVENT2 ("BNEP - Rcvd L2CAP disc cfm, CID: 0x%x, Result 0x%x", l2cap_cid, result);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_congestion_ind
+**
+** Description      This is a callback function called by L2CAP when
+**                  congestion status changes
+**
+*******************************************************************************/
+static void bnep_congestion_ind (UINT16 l2cap_cid, BOOLEAN is_congested)
+{
+    tBNEP_CONN    *p_bcb;
+
+    /* Find BCB based on CID */
+    if ((p_bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd L2CAP cong, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    if (is_congested)
+   {
+        p_bcb->con_flags |= BNEP_FLAGS_L2CAP_CONGESTED;
+       if(bnep_cb.p_tx_data_flow_cb)
+       {
+           bnep_cb.p_tx_data_flow_cb(p_bcb->handle, BNEP_TX_FLOW_OFF);
+       }
+   }
+    else
+    {
+        p_bcb->con_flags &= ~BNEP_FLAGS_L2CAP_CONGESTED;
+
+       if(bnep_cb.p_tx_data_flow_cb)
+       {
+           bnep_cb.p_tx_data_flow_cb(p_bcb->handle, BNEP_TX_FLOW_ON);
+       }
+
+        /* While not congested, send as many buffers as we can */
+        while (!(p_bcb->con_flags & BNEP_FLAGS_L2CAP_CONGESTED))
+        {
+            BT_HDR   *p_buf = (BT_HDR *)GKI_dequeue (&p_bcb->xmit_q);
+
+            if (!p_buf)
+                break;
+
+            L2CA_DataWrite (l2cap_cid, p_buf);
+        }
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_data_ind
+**
+** Description      This function is called when data is received from L2CAP.
+**                  if we are the originator of the connection, we are the SDP
+**                  client, and the received message is queued up for the client.
+**
+**                  If we are the destination of the connection, we are the SDP
+**                  server, so the message is passed to the server processing
+**                  function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_data_ind (UINT16 l2cap_cid, BT_HDR *p_buf)
+{
+    tBNEP_CONN    *p_bcb;
+    UINT8         *p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    UINT16        rem_len = p_buf->len;
+    UINT8         type, ctrl_type, ext_type = 0;
+    BOOLEAN       extension_present, fw_ext_present;
+    UINT16        protocol = 0;
+    UINT8         *p_src_addr, *p_dst_addr;
+
+
+    /* Find CCB based on CID */
+    if ((p_bcb = bnepu_find_bcb_by_cid (l2cap_cid)) == NULL)
+    {
+        BNEP_TRACE_WARNING1 ("BNEP - Rcvd L2CAP data, unknown CID: 0x%x", l2cap_cid);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    /* Get the type and extension bits */
+    type = *p++;
+    extension_present = type >> 7;
+    type &= 0x7f;
+    if ((rem_len <= bnep_frame_hdr_sizes[type]) || (rem_len > BNEP_MTU_SIZE))
+    {
+        BNEP_TRACE_EVENT2 ("BNEP - rcvd frame, bad len: %d  type: 0x%02x", p_buf->len, type);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    rem_len--;
+
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)) &&
+        (type != BNEP_FRAME_CONTROL))
+    {
+        BNEP_TRACE_WARNING2 ("BNEP - Ignored L2CAP data while in state: %d, CID: 0x%x",
+                            p_bcb->con_state, l2cap_cid);
+
+        if (extension_present)
+        {
+            /*
+            ** When there is no connection if a data packet is received
+            ** with unknown control extension headers then those should be processed
+            ** according to complain/ignore law
+            */
+            UINT8       ext, length, *p_data;
+            UINT16      org_len, new_len;
+            /* parse the extension headers and process unknown control headers */
+            org_len = rem_len;
+            new_len = 0;
+            p_data  = p;
+            do {
+
+                ext     = *p++;
+                length  = *p++;
+                p += length;
+
+                if ((!(ext & 0x7F)) && (*p > BNEP_FILTER_MULTI_ADDR_RESPONSE_MSG))
+                    bnep_send_command_not_understood (p_bcb, *p);
+
+                new_len += (length + 2);
+
+                if (new_len > org_len)
+                    break;
+
+            } while (ext & 0x80);
+        }
+
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    if (type > BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY)
+    {
+        BNEP_TRACE_EVENT1 ("BNEP - rcvd frame, unknown type: 0x%02x", type);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    BNEP_TRACE_DEBUG3 ("BNEP - rcv frame, type: %d len: %d Ext: %d", type, p_buf->len, extension_present);
+
+    /* Initialize addresses to 'not supplied' */
+    p_src_addr = p_dst_addr = NULL;
+
+    switch (type)
+    {
+    case BNEP_FRAME_GENERAL_ETHERNET:
+        p_dst_addr = p;
+        p += BD_ADDR_LEN;
+        p_src_addr = p;
+        p += BD_ADDR_LEN;
+        BE_STREAM_TO_UINT16 (protocol, p);
+        rem_len -= 14;
+        break;
+
+    case BNEP_FRAME_CONTROL:
+        ctrl_type = *p;
+        p = bnep_process_control_packet (p_bcb, p, &rem_len, FALSE);
+
+        if (ctrl_type == BNEP_SETUP_CONNECTION_REQUEST_MSG &&
+            p_bcb->con_state != BNEP_STATE_CONNECTED &&
+            extension_present && p && rem_len)
+        {
+            p_bcb->p_pending_data = (BT_HDR *)GKI_getbuf (rem_len);
+            if (p_bcb->p_pending_data)
+            {
+                memcpy ((UINT8 *)(p_bcb->p_pending_data + 1), p, rem_len);
+                p_bcb->p_pending_data->len    = rem_len;
+                p_bcb->p_pending_data->offset = 0;
+            }
+        }
+        else
+        {
+            while (extension_present && p && rem_len)
+            {
+                ext_type = *p++;
+                extension_present = ext_type >> 7;
+                ext_type &= 0x7F;
+
+                /* if unknown extension present stop processing */
+                if (ext_type)
+                    break;
+
+                p = bnep_process_control_packet (p_bcb, p, &rem_len, TRUE);
+            }
+        }
+        GKI_freebuf (p_buf);
+        return;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET:
+        BE_STREAM_TO_UINT16 (protocol, p);
+        rem_len -= 2;
+        break;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET_SRC_ONLY:
+        p_src_addr = p;
+        p += BD_ADDR_LEN;
+        BE_STREAM_TO_UINT16 (protocol, p);
+        rem_len -= 8;
+        break;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY:
+        p_dst_addr = p;
+        p += BD_ADDR_LEN;
+        BE_STREAM_TO_UINT16 (protocol, p);
+        rem_len -= 8;
+        break;
+    }
+
+    /* Process the header extension if there is one */
+    while (extension_present && p && rem_len)
+    {
+        ext_type = *p;
+        extension_present = ext_type >> 7;
+        ext_type &= 0x7F;
+
+        /* if unknown extension present stop processing */
+        if (ext_type)
+        {
+            BNEP_TRACE_EVENT1 ("Data extension type 0x%x found", ext_type);
+            break;
+        }
+
+        p++;
+        rem_len--;
+        p = bnep_process_control_packet (p_bcb, p, &rem_len, TRUE);
+    }
+
+    p_buf->offset += p_buf->len - rem_len;
+    p_buf->len     = rem_len;
+
+    /* Always give the upper layer MAC addresses */
+    if (!p_src_addr)
+        p_src_addr = (UINT8 *) p_bcb->rem_bda;
+
+    if (!p_dst_addr)
+        p_dst_addr = (UINT8 *) bnep_cb.my_bda;
+
+    /* check whether there are any extensions to be forwarded */
+    if (ext_type)
+        fw_ext_present = TRUE;
+    else
+        fw_ext_present = FALSE;
+
+    if (bnep_cb.p_data_buf_cb)
+    {
+        (*bnep_cb.p_data_buf_cb)(p_bcb->handle, p_src_addr, p_dst_addr, protocol, p_buf, fw_ext_present);
+    }
+    else if (bnep_cb.p_data_ind_cb)
+    {
+        (*bnep_cb.p_data_ind_cb)(p_bcb->handle, p_src_addr, p_dst_addr, protocol, p, rem_len, fw_ext_present);
+        GKI_freebuf (p_buf);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_process_timeout
+**
+** Description      This function processes a timeout. If it is a startup
+**                  timeout, we check for reading our BD address. If it
+**                  is an L2CAP timeout, we send a disconnect req to L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_process_timeout (TIMER_LIST_ENT  *p_tle)
+{
+    tBNEP_CONN *p_bcb;
+
+    if (!p_tle->param)
+    {
+        if (!bnep_cb.got_my_bd_addr)
+        {
+            if (BTM_IsDeviceUp())
+                BTM_ReadLocalDeviceAddr (bnep_read_addr_cb);
+
+            btu_start_timer (&bnep_cb.bnep_tle, BTU_TTYPE_BNEP, 2);
+        }
+        return;
+    }
+
+    p_bcb = (tBNEP_CONN *)p_tle->param;
+
+    BNEP_TRACE_EVENT4 ("BNEP - CCB timeout in state: %d  CID: 0x%x flags %x, re_transmit %d",
+                       p_bcb->con_state, p_bcb->l2cap_cid, p_bcb->con_flags, p_bcb->re_transmits);
+
+    if (p_bcb->con_state == BNEP_STATE_CONN_SETUP)
+    {
+        BNEP_TRACE_EVENT2 ("BNEP - CCB timeout in state: %d  CID: 0x%x",
+                           p_bcb->con_state, p_bcb->l2cap_cid);
+
+        if (!(p_bcb->con_flags & BNEP_FLAGS_IS_ORIG))
+        {
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+
+        if (p_bcb->re_transmits++ != BNEP_MAX_RETRANSMITS)
+        {
+            bnep_send_conn_req (p_bcb);
+            btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_CONN_TIMEOUT);
+        }
+        else
+        {
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            if ((p_bcb->con_flags & BNEP_FLAGS_IS_ORIG) && (bnep_cb.p_conn_state_cb))
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_FAILED, FALSE);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+    }
+    else if (p_bcb->con_state != BNEP_STATE_CONNECTED)
+    {
+        BNEP_TRACE_EVENT2 ("BNEP - CCB timeout in state: %d  CID: 0x%x",
+                           p_bcb->con_state, p_bcb->l2cap_cid);
+
+        L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+        /* Tell the user if he has a callback */
+        if ((p_bcb->con_flags & BNEP_FLAGS_IS_ORIG) && (bnep_cb.p_conn_state_cb))
+            (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_CONN_FAILED, FALSE);
+
+        bnepu_release_bcb (p_bcb);
+    }
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    else if (p_bcb->con_flags & BNEP_FLAGS_FILTER_RESP_PEND)
+    {
+        if (p_bcb->re_transmits++ != BNEP_MAX_RETRANSMITS)
+        {
+            bnepu_send_peer_our_filters (p_bcb);
+            btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_FILTER_SET_TIMEOUT);
+        }
+        else
+        {
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            /* Tell the user if he has a callback */
+            if (bnep_cb.p_conn_state_cb)
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_SET_FILTER_FAIL, FALSE);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+    }
+#endif
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    else if (p_bcb->con_flags & BNEP_FLAGS_MULTI_RESP_PEND)
+    {
+        if (p_bcb->re_transmits++ != BNEP_MAX_RETRANSMITS)
+        {
+            bnepu_send_peer_our_multi_filters (p_bcb);
+            btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_FILTER_SET_TIMEOUT);
+        }
+        else
+        {
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            /* Tell the user if he has a callback */
+            if (bnep_cb.p_conn_state_cb)
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_SET_FILTER_FAIL, FALSE);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_connected
+**
+** Description      This function is called when a connection is established
+**                  (after config).
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_connected (tBNEP_CONN *p_bcb)
+{
+    BOOLEAN     is_role_change;
+
+    if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+        is_role_change = TRUE;
+    else
+        is_role_change = FALSE;
+
+    p_bcb->con_state = BNEP_STATE_CONNECTED;
+    p_bcb->con_flags |= BNEP_FLAGS_CONN_COMPLETED;
+    p_bcb->con_flags &= (~BNEP_FLAGS_SETUP_RCVD);
+
+    /* Ensure timer is stopped */
+    btu_stop_timer (&p_bcb->conn_tle);
+    p_bcb->re_transmits = 0;
+
+    /* Tell the upper layer, if he has a callback */
+    if (bnep_cb.p_conn_state_cb)
+        (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_SUCCESS, is_role_change);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_read_addr_cb
+**
+** Description      This function is called by BTM when the local BD address
+**                  is read. It saves the BD address, and flags it as read.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void bnep_read_addr_cb (void *p_bda)
+{
+    UINT8 *bda = (UINT8 *)p_bda;
+    if (p_bda &&
+            (bda[0] | bda[1] | bda[2] | bda[3] | bda[4] | bda[5]) != 0)
+    {
+        /* Save my BD address */
+        memcpy (bnep_cb.my_bda, p_bda, BD_ADDR_LEN);
+
+        bnep_cb.got_my_bd_addr = TRUE;
+    }
+    else
+        /* Retry after a couple seconds */
+        btu_start_timer (&bnep_cb.bnep_tle, BTU_TTYPE_BNEP, 2);
+}
+
diff --git a/stack/bnep/bnep_utils.c b/stack/bnep/bnep_utils.c
new file mode 100644
index 0000000..205eeeb
--- /dev/null
+++ b/stack/bnep/bnep_utils.c
@@ -0,0 +1,1463 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains BNEP utility functions
+ *
+ ******************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include "gki.h"
+#include "bt_types.h"
+#include "bnep_int.h"
+#include "btu.h"
+#include "btm_int.h"
+
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static UINT8 *bnepu_init_hdr (BT_HDR *p_buf, UINT16 hdr_len, UINT8 pkt_type);
+
+void bnepu_process_peer_multicast_filter_set (tBNEP_CONN *p_bcb, UINT8 *p_filters, UINT16 len);
+void bnepu_send_peer_multicast_filter_rsp (tBNEP_CONN *p_bcb, UINT16 response_code);
+
+
+/*******************************************************************************
+**
+** Function         bnepu_find_bcb_by_cid
+**
+** Description      This function searches the bcb table for an entry with the
+**                  passed CID.
+**
+** Returns          the BCB address, or NULL if not found.
+**
+*******************************************************************************/
+tBNEP_CONN *bnepu_find_bcb_by_cid (UINT16 cid)
+{
+    UINT16          xx;
+    tBNEP_CONN     *p_bcb;
+
+    /* Look through each connection control block */
+    for (xx = 0, p_bcb = bnep_cb.bcb; xx < BNEP_MAX_CONNECTIONS; xx++, p_bcb++)
+    {
+        if ((p_bcb->con_state != BNEP_STATE_IDLE) && (p_bcb->l2cap_cid == cid))
+            return (p_bcb);
+    }
+
+    /* If here, not found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_find_bcb_by_bd_addr
+**
+** Description      This function searches the BCB table for an entry with the
+**                  passed Bluetooth Address.
+**
+** Returns          the BCB address, or NULL if not found.
+**
+*******************************************************************************/
+tBNEP_CONN *bnepu_find_bcb_by_bd_addr (UINT8 *p_bda)
+{
+    UINT16          xx;
+    tBNEP_CONN     *p_bcb;
+
+    /* Look through each connection control block */
+    for (xx = 0, p_bcb = bnep_cb.bcb; xx < BNEP_MAX_CONNECTIONS; xx++, p_bcb++)
+    {
+        if (p_bcb->con_state != BNEP_STATE_IDLE)
+        {
+            if (!memcmp ((UINT8 *)(p_bcb->rem_bda), p_bda, BD_ADDR_LEN))
+                return (p_bcb);
+        }
+    }
+
+    /* If here, not found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_allocate_bcb
+**
+** Description      This function allocates a new BCB.
+**
+** Returns          BCB address, or NULL if none available.
+**
+*******************************************************************************/
+tBNEP_CONN *bnepu_allocate_bcb (BD_ADDR p_rem_bda)
+{
+    UINT16          xx;
+    tBNEP_CONN     *p_bcb;
+
+    /* Look through each connection control block for a free one */
+    for (xx = 0, p_bcb = bnep_cb.bcb; xx < BNEP_MAX_CONNECTIONS; xx++, p_bcb++)
+    {
+        if (p_bcb->con_state == BNEP_STATE_IDLE)
+        {
+            memset ((UINT8 *)p_bcb, 0, sizeof (tBNEP_CONN));
+
+            p_bcb->conn_tle.param = (UINT32) p_bcb;
+
+            memcpy ((UINT8 *)(p_bcb->rem_bda), (UINT8 *)p_rem_bda, BD_ADDR_LEN);
+            p_bcb->handle = xx + 1;
+
+            return (p_bcb);
+        }
+    }
+
+    /* If here, no free BCB found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_release_bcb
+**
+** Description      This function releases a BCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_release_bcb (tBNEP_CONN *p_bcb)
+{
+    /* Ensure timer is stopped */
+    btu_stop_timer (&p_bcb->conn_tle);
+
+    /* Drop any response pointer we may be holding */
+    p_bcb->con_state        = BNEP_STATE_IDLE;
+    p_bcb->p_pending_data   = NULL;
+
+    /* Free transmit queue */
+    while (p_bcb->xmit_q.count)
+    {
+        GKI_freebuf (GKI_dequeue (&p_bcb->xmit_q));
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_send_conn_req
+**
+** Description      This function sends a BNEP connection request to peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_send_conn_req (tBNEP_CONN *p_bcb)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p, *p_start;
+
+    BNEP_TRACE_DEBUG1 ("BNEP sending setup req with dst uuid %x", p_bcb->dst_uuid.uu.uuid16);
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - not able to send connection request");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = p_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_SETUP_CONNECTION_REQUEST_MSG);
+
+    UINT8_TO_BE_STREAM (p, p_bcb->dst_uuid.len);
+
+    if (p_bcb->dst_uuid.len == 2)
+    {
+        UINT16_TO_BE_STREAM (p, p_bcb->dst_uuid.uu.uuid16);
+        UINT16_TO_BE_STREAM (p, p_bcb->src_uuid.uu.uuid16);
+    }
+#if (defined (BNEP_SUPPORTS_ALL_UUID_LENGTHS) && BNEP_SUPPORTS_ALL_UUID_LENGTHS == TRUE)
+    else if (p_bcb->dst_uuid.len == 4)
+    {
+        UINT32_TO_BE_STREAM (p, p_bcb->dst_uuid.uu.uuid32);
+        UINT32_TO_BE_STREAM (p, p_bcb->src_uuid.uu.uuid32);
+    }
+    else
+    {
+        memcpy (p, p_bcb->dst_uuid.uu.uuid128, p_bcb->dst_uuid.len);
+        p += p_bcb->dst_uuid.len;
+        memcpy (p, p_bcb->src_uuid.uu.uuid128, p_bcb->dst_uuid.len);
+        p += p_bcb->dst_uuid.len;
+    }
+#endif
+
+    p_buf->len = (UINT16)(p - p_start);
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_send_conn_responce
+**
+** Description      This function sends a BNEP setup response to peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_send_conn_responce (tBNEP_CONN *p_bcb, UINT16 resp_code)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    BNEP_TRACE_EVENT1 ("BNEP - bnep_send_conn_responce for CID: 0x%x", p_bcb->l2cap_cid);
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - not able to send connection response");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_SETUP_CONNECTION_RESPONSE_MSG);
+
+    UINT16_TO_BE_STREAM (p, resp_code);
+
+    p_buf->len = 4;
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_send_peer_our_filters
+**
+** Description      This function sends our filters to a peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_send_peer_our_filters (tBNEP_CONN *p_bcb)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT16      xx;
+
+    BNEP_TRACE_DEBUG0 ("BNEP sending peer our filters");
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - no buffer send filters");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_FILTER_NET_TYPE_SET_MSG);
+
+    UINT16_TO_BE_STREAM (p, (4 * p_bcb->sent_num_filters));
+    for (xx = 0; xx < p_bcb->sent_num_filters; xx++)
+    {
+        UINT16_TO_BE_STREAM (p, p_bcb->sent_prot_filter_start[xx]);
+        UINT16_TO_BE_STREAM (p, p_bcb->sent_prot_filter_end[xx]);
+    }
+
+    p_buf->len = 4 + (4 * p_bcb->sent_num_filters);
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+    p_bcb->con_flags |= BNEP_FLAGS_FILTER_RESP_PEND;
+
+    /* Start timer waiting for setup response */
+    btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_FILTER_SET_TIMEOUT);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_send_peer_our_multi_filters
+**
+** Description      This function sends our multicast filters to a peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_send_peer_our_multi_filters (tBNEP_CONN *p_bcb)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT16      xx;
+
+    BNEP_TRACE_DEBUG0 ("BNEP sending peer our multicast filters");
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - no buffer to send multicast filters");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_FILTER_MULTI_ADDR_SET_MSG);
+
+    UINT16_TO_BE_STREAM (p, (2 * BD_ADDR_LEN * p_bcb->sent_mcast_filters));
+    for (xx = 0; xx < p_bcb->sent_mcast_filters; xx++)
+    {
+        memcpy (p, p_bcb->sent_mcast_filter_start[xx], BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+        memcpy (p, p_bcb->sent_mcast_filter_end[xx], BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+    }
+
+    p_buf->len = 4 + (2 * BD_ADDR_LEN * p_bcb->sent_mcast_filters);
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+    p_bcb->con_flags |= BNEP_FLAGS_MULTI_RESP_PEND;
+
+    /* Start timer waiting for setup response */
+    btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_FILTER_SET_TIMEOUT);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_send_peer_filter_rsp
+**
+** Description      This function sends a filter response to a peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_send_peer_filter_rsp (tBNEP_CONN *p_bcb, UINT16 response_code)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    BNEP_TRACE_DEBUG0 ("BNEP sending filter response");
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - no buffer filter rsp");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_FILTER_NET_TYPE_RESPONSE_MSG);
+
+    UINT16_TO_BE_STREAM (p, response_code);
+
+    p_buf->len = 4;
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_send_command_not_understood
+**
+** Description      This function sends a BNEP command not understood message
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_send_command_not_understood (tBNEP_CONN *p_bcb, UINT8 cmd_code)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    BNEP_TRACE_EVENT2 ("BNEP - bnep_send_command_not_understood for CID: 0x%x, cmd 0x%x", p_bcb->l2cap_cid, cmd_code);
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - not able to send connection response");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_CONTROL_COMMAND_NOT_UNDERSTOOD);
+
+    UINT8_TO_BE_STREAM (p, cmd_code);
+
+    p_buf->len = 3;
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_check_send_packet
+**
+** Description      This function tries to send a packet to L2CAP.
+**                  If L2CAP is flow controlled, it enqueues the
+**                  packet to the transmit queue
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_check_send_packet (tBNEP_CONN *p_bcb, BT_HDR *p_buf)
+{
+    BNEP_TRACE_EVENT1 ("BNEP - bnepu_check_send_packet for CID: 0x%x", p_bcb->l2cap_cid);
+    if (p_bcb->con_flags & BNEP_FLAGS_L2CAP_CONGESTED)
+    {
+        if (p_bcb->xmit_q.count >= BNEP_MAX_XMITQ_DEPTH)
+        {
+            BNEP_TRACE_EVENT1 ("BNEP - congested, dropping buf, CID: 0x%x", p_bcb->l2cap_cid);
+
+            GKI_freebuf (p_buf);
+        }
+        else
+        {
+            GKI_enqueue (&p_bcb->xmit_q, p_buf);
+        }
+    }
+    else
+    {
+        L2CA_DataWrite (p_bcb->l2cap_cid, p_buf);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_build_bnep_hdr
+**
+** Description      This function builds the BNEP header for a packet
+**                  Extension headers are not sent yet, so there is no
+**                  check for that.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_build_bnep_hdr (tBNEP_CONN *p_bcb, BT_HDR *p_buf, UINT16 protocol,
+                           UINT8 *p_src_addr, UINT8 *p_dest_addr, BOOLEAN fw_ext_present)
+{
+    UINT8    ext_bit, *p = (UINT8 *)NULL;
+    UINT8    type = BNEP_FRAME_COMPRESSED_ETHERNET;
+
+    ext_bit = fw_ext_present ? 0x80 : 0x00;
+
+    if ((p_src_addr) && (memcmp (p_src_addr, bnep_cb.my_bda, BD_ADDR_LEN)))
+        type = BNEP_FRAME_COMPRESSED_ETHERNET_SRC_ONLY;
+
+    if (memcmp (p_dest_addr, p_bcb->rem_bda, BD_ADDR_LEN))
+        type = (type == BNEP_FRAME_COMPRESSED_ETHERNET) ? BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY : BNEP_FRAME_GENERAL_ETHERNET;
+
+    if (!p_src_addr)
+        p_src_addr = (UINT8 *)bnep_cb.my_bda;
+
+    switch (type)
+    {
+    case BNEP_FRAME_GENERAL_ETHERNET:
+        p = bnepu_init_hdr (p_buf, 15, (UINT8)(ext_bit | BNEP_FRAME_GENERAL_ETHERNET));
+
+        memcpy (p, p_dest_addr, BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+
+        memcpy (p, p_src_addr, BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+        break;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET:
+        p = bnepu_init_hdr (p_buf, 3, (UINT8)(ext_bit | BNEP_FRAME_COMPRESSED_ETHERNET));
+        break;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET_SRC_ONLY:
+        p = bnepu_init_hdr (p_buf, 9, (UINT8)(ext_bit | BNEP_FRAME_COMPRESSED_ETHERNET_SRC_ONLY));
+
+        memcpy (p, p_src_addr, BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+        break;
+
+    case BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY:
+        p = bnepu_init_hdr (p_buf, 9, (UINT8)(ext_bit | BNEP_FRAME_COMPRESSED_ETHERNET_DEST_ONLY));
+
+        memcpy (p, p_dest_addr, BD_ADDR_LEN);
+        p += BD_ADDR_LEN;
+        break;
+    }
+
+    UINT16_TO_BE_STREAM (p, protocol);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_init_hdr
+**
+** Description      This function initializes the BNEP header
+**
+** Returns          pointer to header in buffer
+**
+*******************************************************************************/
+static UINT8 *bnepu_init_hdr (BT_HDR *p_buf, UINT16 hdr_len, UINT8 pkt_type)
+{
+    UINT8    *p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* See if we need to make space in the buffer */
+    if (p_buf->offset < (hdr_len + L2CAP_MIN_OFFSET))
+    {
+        UINT16 xx, diff = BNEP_MINIMUM_OFFSET - p_buf->offset;
+        p = p + p_buf->len - 1;
+        for (xx = 0; xx < p_buf->len; xx++, p--)
+            p[diff] = *p;
+
+        p_buf->offset = BNEP_MINIMUM_OFFSET;
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    }
+
+    p_buf->len    += hdr_len;
+    p_buf->offset -= hdr_len;
+    p             -= hdr_len;
+
+    *p++ = pkt_type;
+
+    return (p);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_process_setup_conn_req
+**
+** Description      This function processes a peer's setup connection request
+**                  message. The destination UUID is verified and response sent
+**                  Connection open indication will be given to PAN profile
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_process_setup_conn_req (tBNEP_CONN *p_bcb, UINT8 *p_setup, UINT8 len)
+{
+    BNEP_TRACE_EVENT1 ("BNEP - bnep_process_setup_conn_req for CID: 0x%x", p_bcb->l2cap_cid);
+
+    if (p_bcb->con_state != BNEP_STATE_CONN_SETUP &&
+        p_bcb->con_state != BNEP_STATE_SEC_CHECKING &&
+        p_bcb->con_state != BNEP_STATE_CONNECTED)
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - setup request in bad state %d", p_bcb->con_state);
+        bnep_send_conn_responce (p_bcb, BNEP_SETUP_CONN_NOT_ALLOWED);
+        return;
+    }
+
+    /* Check if we already initiated security check or if waiting for user responce */
+    if (p_bcb->con_flags & BNEP_FLAGS_SETUP_RCVD)
+    {
+        BNEP_TRACE_EVENT0 ("BNEP - Duplicate Setup message received while doing security check");
+        return;
+    }
+
+    /* Check if peer is the originator */
+    if (p_bcb->con_state != BNEP_STATE_CONNECTED &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_SETUP_RCVD)) &&
+        (p_bcb->con_flags & BNEP_FLAGS_IS_ORIG))
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - setup request when we are originator", p_bcb->con_state);
+        bnep_send_conn_responce (p_bcb, BNEP_SETUP_CONN_NOT_ALLOWED);
+        return;
+    }
+
+    if (p_bcb->con_state == BNEP_STATE_CONNECTED)
+    {
+        memcpy ((UINT8 *)&(p_bcb->prv_src_uuid), (UINT8 *)&(p_bcb->src_uuid), sizeof (tBT_UUID));
+        memcpy ((UINT8 *)&(p_bcb->prv_dst_uuid), (UINT8 *)&(p_bcb->dst_uuid), sizeof (tBT_UUID));
+    }
+
+    p_bcb->dst_uuid.len = p_bcb->src_uuid.len = len;
+
+    if (p_bcb->dst_uuid.len == 2)
+    {
+        /* because peer initiated connection keep src uuid as dst uuid */
+        BE_STREAM_TO_UINT16 (p_bcb->src_uuid.uu.uuid16, p_setup);
+        BE_STREAM_TO_UINT16 (p_bcb->dst_uuid.uu.uuid16, p_setup);
+
+        /* If nothing has changed don't bother the profile */
+        if (p_bcb->con_state == BNEP_STATE_CONNECTED &&
+            p_bcb->src_uuid.uu.uuid16 == p_bcb->prv_src_uuid.uu.uuid16 &&
+            p_bcb->dst_uuid.uu.uuid16 == p_bcb->prv_dst_uuid.uu.uuid16)
+        {
+            bnep_send_conn_responce (p_bcb, BNEP_SETUP_CONN_OK);
+            return;
+        }
+    }
+#if (defined (BNEP_SUPPORTS_ALL_UUID_LENGTHS) && BNEP_SUPPORTS_ALL_UUID_LENGTHS == TRUE)
+    else if (p_bcb->dst_uuid.len == 4)
+    {
+        BE_STREAM_TO_UINT32 (p_bcb->src_uuid.uu.uuid32, p_setup);
+        BE_STREAM_TO_UINT32 (p_bcb->dst_uuid.uu.uuid32, p_setup);
+    }
+    else if (p_bcb->dst_uuid.len == 16)
+    {
+        memcpy (p_bcb->src_uuid.uu.uuid128, p_setup, p_bcb->src_uuid.len);
+        p_setup += p_bcb->src_uuid.len;
+        memcpy (p_bcb->dst_uuid.uu.uuid128, p_setup, p_bcb->dst_uuid.len);
+        p_setup += p_bcb->dst_uuid.len;
+    }
+#endif
+    else
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - Bad UID len %d in ConnReq", p_bcb->dst_uuid.len);
+        bnep_send_conn_responce (p_bcb, BNEP_SETUP_INVALID_UUID_SIZE);
+        return;
+    }
+
+    p_bcb->con_state = BNEP_STATE_SEC_CHECKING;
+    p_bcb->con_flags |= BNEP_FLAGS_SETUP_RCVD;
+
+    BNEP_TRACE_EVENT1 ("BNEP initiating security check for incoming call for uuid 0x%x", p_bcb->src_uuid.uu.uuid16);
+#if (!defined (BNEP_DO_AUTH_FOR_ROLE_SWITCH) || BNEP_DO_AUTH_FOR_ROLE_SWITCH == FALSE)
+    if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+        bnep_sec_check_complete (p_bcb->rem_bda, p_bcb, BTM_SUCCESS);
+    else
+#endif
+    btm_sec_mx_access_request (p_bcb->rem_bda, BT_PSM_BNEP, FALSE,
+                               BTM_SEC_PROTO_BNEP, bnep_get_uuid32(&(p_bcb->src_uuid)),
+                               &bnep_sec_check_complete, p_bcb);
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_process_setup_conn_responce
+**
+** Description      This function processes a peer's setup connection response
+**                  message. The response code is verified and
+**                  Connection open indication will be given to PAN profile
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_process_setup_conn_responce (tBNEP_CONN *p_bcb, UINT8 *p_setup)
+{
+    tBNEP_RESULT    resp;
+    UINT16          resp_code;
+
+    BNEP_TRACE_DEBUG0 ("BNEP received setup responce");
+    /* The state should be either SETUP or CONNECTED */
+    if (p_bcb->con_state != BNEP_STATE_CONN_SETUP)
+    {
+        /* Should we disconnect ? */
+        BNEP_TRACE_ERROR1 ("BNEP - setup response in bad state %d", p_bcb->con_state);
+        return;
+    }
+
+    /* Check if we are the originator */
+    if (!(p_bcb->con_flags & BNEP_FLAGS_IS_ORIG))
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - setup response when we are not originator", p_bcb->con_state);
+        return;
+    }
+
+    BE_STREAM_TO_UINT16  (resp_code, p_setup);
+
+    switch (resp_code)
+    {
+    case BNEP_SETUP_INVALID_SRC_UUID:
+        resp = BNEP_CONN_FAILED_SRC_UUID;
+        break;
+
+    case BNEP_SETUP_INVALID_DEST_UUID:
+        resp = BNEP_CONN_FAILED_DST_UUID;
+        break;
+
+    case BNEP_SETUP_INVALID_UUID_SIZE:
+        resp = BNEP_CONN_FAILED_UUID_SIZE;
+        break;
+
+    case BNEP_SETUP_CONN_NOT_ALLOWED:
+    default:
+        resp = BNEP_CONN_FAILED;
+        break;
+    }
+
+    /* Check the responce code */
+    if (resp_code != BNEP_SETUP_CONN_OK)
+    {
+        if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+        {
+            BNEP_TRACE_EVENT1 ("BNEP - role change response is %d", resp_code);
+
+            /* Restore the earlier BNEP status */
+            p_bcb->con_state = BNEP_STATE_CONNECTED;
+            p_bcb->con_flags &= (~BNEP_FLAGS_SETUP_RCVD);
+            memcpy ((UINT8 *)&(p_bcb->src_uuid), (UINT8 *)&(p_bcb->prv_src_uuid), sizeof (tBT_UUID));
+            memcpy ((UINT8 *)&(p_bcb->dst_uuid), (UINT8 *)&(p_bcb->prv_dst_uuid), sizeof (tBT_UUID));
+
+            /* Ensure timer is stopped */
+            btu_stop_timer (&p_bcb->conn_tle);
+            p_bcb->re_transmits = 0;
+
+            /* Tell the user if he has a callback */
+            if (bnep_cb.p_conn_state_cb)
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, resp, TRUE);
+
+            return;
+        }
+        else
+        {
+            BNEP_TRACE_ERROR1 ("BNEP - setup response %d is not OK", resp_code);
+
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            /* Tell the user if he has a callback */
+            if ((p_bcb->con_flags & BNEP_FLAGS_IS_ORIG) && (bnep_cb.p_conn_state_cb))
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, resp, FALSE);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+    }
+
+    /* Received successful responce */
+    bnep_connected (p_bcb);
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_process_control_packet
+**
+** Description      This function processes a peer's setup connection request
+**                  message. The destination UUID is verified and response sent
+**                  Connection open indication will be given to PAN profile
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8 *bnep_process_control_packet (tBNEP_CONN *p_bcb, UINT8 *p, UINT16 *rem_len, BOOLEAN is_ext)
+{
+    UINT8       control_type;
+    BOOLEAN     bad_pkt = FALSE;
+    UINT16      len, ext_len = 0;
+
+    if (is_ext)
+    {
+        ext_len = *p++;
+        *rem_len = *rem_len - 1;
+    }
+
+    control_type = *p++;
+    *rem_len = *rem_len - 1;
+
+    BNEP_TRACE_EVENT3 ("BNEP processing control packet rem_len %d, is_ext %d, ctrl_type %d", *rem_len, is_ext, control_type);
+
+    switch (control_type)
+    {
+    case BNEP_CONTROL_COMMAND_NOT_UNDERSTOOD:
+        BNEP_TRACE_ERROR1 ("BNEP Received Cmd not understood for ctl pkt type: %d", *p);
+        p++;
+        *rem_len = *rem_len - 1;
+        break;
+
+    case BNEP_SETUP_CONNECTION_REQUEST_MSG:
+        len = *p++;
+        if (*rem_len < ((2 * len) + 1))
+        {
+            bad_pkt = TRUE;
+            BNEP_TRACE_ERROR0 ("BNEP Received Setup message with bad length");
+            break;
+        }
+        if (!is_ext)
+            bnep_process_setup_conn_req (p_bcb, p, (UINT8)len);
+        p += (2 * len);
+        *rem_len = *rem_len - (2 * len) - 1;
+        break;
+
+    case BNEP_SETUP_CONNECTION_RESPONSE_MSG:
+        if (!is_ext)
+            bnep_process_setup_conn_responce (p_bcb, p);
+        p += 2;
+        *rem_len = *rem_len - 2;
+        break;
+
+    case BNEP_FILTER_NET_TYPE_SET_MSG:
+        BE_STREAM_TO_UINT16 (len, p);
+        if (*rem_len < (len + 2))
+        {
+            bad_pkt = TRUE;
+            BNEP_TRACE_ERROR0 ("BNEP Received Filter set message with bad length");
+            break;
+        }
+        bnepu_process_peer_filter_set (p_bcb, p, len);
+        p += len;
+        *rem_len = *rem_len - len - 2;
+        break;
+
+    case BNEP_FILTER_NET_TYPE_RESPONSE_MSG:
+        bnepu_process_peer_filter_rsp (p_bcb, p);
+        p += 2;
+        *rem_len = *rem_len - 2;
+        break;
+
+    case BNEP_FILTER_MULTI_ADDR_SET_MSG:
+        BE_STREAM_TO_UINT16 (len, p);
+        if (*rem_len < (len + 2))
+        {
+            bad_pkt = TRUE;
+            BNEP_TRACE_ERROR0 ("BNEP Received Multicast Filter Set message with bad length");
+            break;
+        }
+        bnepu_process_peer_multicast_filter_set (p_bcb, p, len);
+        p += len;
+        *rem_len = *rem_len - len - 2;
+        break;
+
+    case BNEP_FILTER_MULTI_ADDR_RESPONSE_MSG:
+        bnepu_process_multicast_filter_rsp (p_bcb, p);
+        p += 2;
+        *rem_len = *rem_len - 2;
+        break;
+
+    default :
+        BNEP_TRACE_ERROR1 ("BNEP - bad ctl pkt type: %d", control_type);
+        bnep_send_command_not_understood (p_bcb, control_type);
+        if (is_ext)
+        {
+            p += (ext_len - 1);
+            *rem_len -= (ext_len - 1);
+        }
+        break;
+    }
+
+    if (bad_pkt)
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - bad ctl pkt length: %d", *rem_len);
+        *rem_len = 0;
+        return NULL;
+    }
+
+    return p;
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_process_peer_filter_set
+**
+** Description      This function processes a peer's filter control
+**                  'set' message. The filters are stored in the BCB,
+**                  and an appropriate filter response message sent.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_process_peer_filter_set (tBNEP_CONN *p_bcb, UINT8 *p_filters, UINT16 len)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    UINT16      num_filters = 0;
+    UINT16      xx, resp_code = BNEP_FILTER_CRL_OK;
+    UINT16      start, end;
+    UINT8       *p_temp_filters;
+
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+    {
+        BNEP_TRACE_DEBUG0 ("BNEP received filter set from peer when there is no connection");
+        return;
+    }
+
+    BNEP_TRACE_DEBUG0 ("BNEP received filter set from peer");
+    /* Check for length not a multiple of 4 */
+    if (len & 3)
+    {
+        BNEP_TRACE_EVENT1 ("BNEP - bad filter len: %d", len);
+        bnepu_send_peer_filter_rsp (p_bcb, BNEP_FILTER_CRL_BAD_RANGE);
+        return;
+    }
+
+    if (len)
+        num_filters = (UINT16) (len >> 2);
+
+    /* Validate filter values */
+    if (num_filters <= BNEP_MAX_PROT_FILTERS)
+    {
+        p_temp_filters = p_filters;
+        for (xx = 0; xx < num_filters; xx++)
+        {
+            BE_STREAM_TO_UINT16  (start, p_temp_filters);
+            BE_STREAM_TO_UINT16  (end,   p_temp_filters);
+
+            if (start > end)
+            {
+                resp_code = BNEP_FILTER_CRL_BAD_RANGE;
+                break;
+            }
+        }
+    }
+    else
+        resp_code   = BNEP_FILTER_CRL_MAX_REACHED;
+
+    if (resp_code != BNEP_FILTER_CRL_OK)
+    {
+        bnepu_send_peer_filter_rsp (p_bcb, resp_code);
+        return;
+    }
+
+    if (bnep_cb.p_filter_ind_cb)
+        (*bnep_cb.p_filter_ind_cb) (p_bcb->handle, TRUE, 0, len, p_filters);
+
+    p_bcb->rcvd_num_filters = num_filters;
+    for (xx = 0; xx < num_filters; xx++)
+    {
+        BE_STREAM_TO_UINT16  (start, p_filters);
+        BE_STREAM_TO_UINT16  (end,   p_filters);
+
+        p_bcb->rcvd_prot_filter_start[xx] = start;
+        p_bcb->rcvd_prot_filter_end[xx]   = end;
+    }
+
+    bnepu_send_peer_filter_rsp (p_bcb, resp_code);
+#else
+    bnepu_send_peer_filter_rsp (p_bcb, BNEP_FILTER_CRL_UNSUPPORTED);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_process_peer_filter_rsp
+**
+** Description      This function processes a peer's filter control
+**                  'response' message.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_process_peer_filter_rsp (tBNEP_CONN *p_bcb, UINT8 *p_data)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    UINT16          resp_code;
+    tBNEP_RESULT    result;
+
+    BNEP_TRACE_DEBUG0 ("BNEP received filter responce");
+    /* The state should be  CONNECTED */
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - filter response in bad state %d", p_bcb->con_state);
+        return;
+    }
+
+    /* Check if we are the originator */
+    if (!(p_bcb->con_flags & BNEP_FLAGS_FILTER_RESP_PEND))
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - filter response when not expecting");
+        return;
+    }
+
+    /* Ensure timer is stopped */
+    btu_stop_timer (&p_bcb->conn_tle);
+    p_bcb->con_flags &= ~BNEP_FLAGS_FILTER_RESP_PEND;
+    p_bcb->re_transmits = 0;
+
+    BE_STREAM_TO_UINT16  (resp_code, p_data);
+
+    result = BNEP_SUCCESS;
+    if (resp_code != BNEP_FILTER_CRL_OK)
+        result = BNEP_SET_FILTER_FAIL;
+
+    if (bnep_cb.p_filter_ind_cb)
+        (*bnep_cb.p_filter_ind_cb) (p_bcb->handle, FALSE, result, 0, NULL);
+
+    return;
+#endif
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnepu_process_multicast_filter_rsp
+**
+** Description      This function processes multicast filter control
+**                  'response' message.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_process_multicast_filter_rsp (tBNEP_CONN *p_bcb, UINT8 *p_data)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    UINT16          resp_code;
+    tBNEP_RESULT    result;
+
+    BNEP_TRACE_DEBUG0 ("BNEP received multicast filter responce");
+    /* The state should be  CONNECTED */
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+    {
+        BNEP_TRACE_ERROR1 ("BNEP - multicast filter response in bad state %d", p_bcb->con_state);
+        return;
+    }
+
+    /* Check if we are the originator */
+    if (!(p_bcb->con_flags & BNEP_FLAGS_MULTI_RESP_PEND))
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - multicast filter response when not expecting");
+        return;
+    }
+
+    /* Ensure timer is stopped */
+    btu_stop_timer (&p_bcb->conn_tle);
+    p_bcb->con_flags &= ~BNEP_FLAGS_MULTI_RESP_PEND;
+    p_bcb->re_transmits = 0;
+
+    BE_STREAM_TO_UINT16  (resp_code, p_data);
+
+    result = BNEP_SUCCESS;
+    if (resp_code != BNEP_FILTER_CRL_OK)
+        result = BNEP_SET_FILTER_FAIL;
+
+    if (bnep_cb.p_mfilter_ind_cb)
+        (*bnep_cb.p_mfilter_ind_cb) (p_bcb->handle, FALSE, result, 0, NULL);
+
+    return;
+#endif
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnepu_process_peer_multicast_filter_set
+**
+** Description      This function processes a peer's filter control
+**                  'set' message. The filters are stored in the BCB,
+**                  and an appropriate filter response message sent.
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_process_peer_multicast_filter_set (tBNEP_CONN *p_bcb, UINT8 *p_filters, UINT16 len)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    UINT16          resp_code = BNEP_FILTER_CRL_OK;
+    UINT16          num_filters, xx;
+    UINT8           *p_temp_filters, null_bda[BD_ADDR_LEN] = {0,0,0,0,0,0};
+
+    if ((p_bcb->con_state != BNEP_STATE_CONNECTED) &&
+        (!(p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)))
+    {
+        BNEP_TRACE_DEBUG0 ("BNEP received multicast filter set from peer when there is no connection");
+        return;
+    }
+
+    if (len % 12)
+    {
+        BNEP_TRACE_EVENT1 ("BNEP - bad filter len: %d", len);
+        bnepu_send_peer_multicast_filter_rsp (p_bcb, BNEP_FILTER_CRL_BAD_RANGE);
+        return;
+    }
+
+    if (len > (BNEP_MAX_MULTI_FILTERS * 2 * BD_ADDR_LEN))
+    {
+        BNEP_TRACE_EVENT0 ("BNEP - Too many filters");
+        bnepu_send_peer_multicast_filter_rsp (p_bcb, BNEP_FILTER_CRL_MAX_REACHED);
+        return;
+    }
+
+    num_filters = 0;
+    if (len)
+        num_filters = (UINT16) (len / 12);
+
+    /* Validate filter values */
+    if (num_filters <= BNEP_MAX_MULTI_FILTERS)
+    {
+        p_temp_filters = p_filters;
+        for (xx = 0; xx < num_filters; xx++)
+        {
+            if (memcmp (p_temp_filters, p_temp_filters + BD_ADDR_LEN, BD_ADDR_LEN) > 0)
+            {
+                bnepu_send_peer_multicast_filter_rsp (p_bcb, BNEP_FILTER_CRL_BAD_RANGE);
+                return;
+            }
+
+            p_temp_filters += (BD_ADDR_LEN * 2);
+        }
+    }
+
+    p_bcb->rcvd_mcast_filters = num_filters;
+    for (xx = 0; xx < num_filters; xx++)
+    {
+        memcpy (p_bcb->rcvd_mcast_filter_start[xx], p_filters, BD_ADDR_LEN);
+        memcpy (p_bcb->rcvd_mcast_filter_end[xx], p_filters + BD_ADDR_LEN, BD_ADDR_LEN);
+        p_filters += (BD_ADDR_LEN * 2);
+
+        /* Check if any of the ranges have all zeros as both starting and ending addresses */
+        if ((memcmp (null_bda, p_bcb->rcvd_mcast_filter_start[xx], BD_ADDR_LEN) == 0) &&
+            (memcmp (null_bda, p_bcb->rcvd_mcast_filter_end[xx], BD_ADDR_LEN) == 0))
+        {
+            p_bcb->rcvd_mcast_filters = 0xFFFF;
+            break;
+        }
+    }
+
+    BNEP_TRACE_EVENT1 ("BNEP multicast filters %d", p_bcb->rcvd_mcast_filters);
+    bnepu_send_peer_multicast_filter_rsp (p_bcb, resp_code);
+
+    if (bnep_cb.p_mfilter_ind_cb)
+        (*bnep_cb.p_mfilter_ind_cb) (p_bcb->handle, TRUE, 0, len, p_filters);
+#else
+    bnepu_send_peer_multicast_filter_rsp (p_bcb, BNEP_FILTER_CRL_UNSUPPORTED);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         bnepu_send_peer_multicast_filter_rsp
+**
+** Description      This function sends a filter response to a peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnepu_send_peer_multicast_filter_rsp (tBNEP_CONN *p_bcb, UINT16 response_code)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    BNEP_TRACE_DEBUG1 ("BNEP sending multicast filter response %d", response_code);
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (BNEP_POOL_ID)) == NULL)
+    {
+        BNEP_TRACE_ERROR0 ("BNEP - no buffer filter rsp");
+        return;
+    }
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Put in BNEP frame type - filter control */
+    UINT8_TO_BE_STREAM (p, BNEP_FRAME_CONTROL);
+
+    /* Put in filter message type - set filters */
+    UINT8_TO_BE_STREAM (p, BNEP_FILTER_MULTI_ADDR_RESPONSE_MSG);
+
+    UINT16_TO_BE_STREAM (p, response_code);
+
+    p_buf->len = 4;
+
+    bnepu_check_send_packet (p_bcb, p_buf);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_sec_check_complete
+**
+** Description      This function is registered with BTM and will be called
+**                  after completing the security procedures
+**
+** Returns          void
+**
+*******************************************************************************/
+void bnep_sec_check_complete (BD_ADDR bd_addr, void *p_ref_data, UINT8 result)
+{
+    tBNEP_CONN      *p_bcb = (tBNEP_CONN *)p_ref_data;
+    UINT16          resp_code = BNEP_SETUP_CONN_OK;
+    BOOLEAN         is_role_change;
+
+    BNEP_TRACE_EVENT1 ("BNEP security callback returned result %d", result);
+    if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+        is_role_change = TRUE;
+    else
+        is_role_change = FALSE;
+
+    /* check if the port is still waiting for security to complete */
+    if (p_bcb->con_state != BNEP_STATE_SEC_CHECKING)
+    {
+        BNEP_TRACE_ERROR1 ("BNEP Connection in wrong state %d when security is completed", p_bcb->con_state);
+        return;
+    }
+
+    /* if it is outgoing call and result is FAILURE return security fail error */
+    if (!(p_bcb->con_flags & BNEP_FLAGS_SETUP_RCVD))
+    {
+        if (result != BTM_SUCCESS)
+        {
+            if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+            {
+                /* Tell the user that role change is failed because of security */
+                if (bnep_cb.p_conn_state_cb)
+                    (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_SECURITY_FAIL, is_role_change);
+
+                p_bcb->con_state = BNEP_STATE_CONNECTED;
+                memcpy ((UINT8 *)&(p_bcb->src_uuid), (UINT8 *)&(p_bcb->prv_src_uuid), sizeof (tBT_UUID));
+                memcpy ((UINT8 *)&(p_bcb->dst_uuid), (UINT8 *)&(p_bcb->prv_dst_uuid), sizeof (tBT_UUID));
+                return;
+            }
+
+            L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+            /* Tell the user if he has a callback */
+            if (bnep_cb.p_conn_state_cb)
+                (*bnep_cb.p_conn_state_cb) (p_bcb->handle, p_bcb->rem_bda, BNEP_SECURITY_FAIL, is_role_change);
+
+            bnepu_release_bcb (p_bcb);
+            return;
+        }
+
+        /* Transition to the next appropriate state, waiting for connection confirm. */
+        p_bcb->con_state = BNEP_STATE_CONN_SETUP;
+
+        bnep_send_conn_req (p_bcb);
+        btu_start_timer (&p_bcb->conn_tle, BTU_TTYPE_BNEP, BNEP_CONN_TIMEOUT);
+        return;
+    }
+
+    /* it is an incoming call respond appropriately */
+    if (result != BTM_SUCCESS)
+    {
+        bnep_send_conn_responce (p_bcb, BNEP_SETUP_CONN_NOT_ALLOWED);
+        if (p_bcb->con_flags & BNEP_FLAGS_CONN_COMPLETED)
+        {
+            /* Role change is failed because of security. Revert back to connected state */
+            p_bcb->con_state = BNEP_STATE_CONNECTED;
+            p_bcb->con_flags &= (~BNEP_FLAGS_SETUP_RCVD);
+            memcpy ((UINT8 *)&(p_bcb->src_uuid), (UINT8 *)&(p_bcb->prv_src_uuid), sizeof (tBT_UUID));
+            memcpy ((UINT8 *)&(p_bcb->dst_uuid), (UINT8 *)&(p_bcb->prv_dst_uuid), sizeof (tBT_UUID));
+            return;
+        }
+
+        L2CA_DisconnectReq (p_bcb->l2cap_cid);
+
+        bnepu_release_bcb (p_bcb);
+        return;
+    }
+
+    if (bnep_cb.p_conn_ind_cb)
+    {
+        p_bcb->con_state = BNEP_STATE_CONN_SETUP;
+        (*bnep_cb.p_conn_ind_cb) (p_bcb->handle, p_bcb->rem_bda, &p_bcb->dst_uuid, &p_bcb->src_uuid, is_role_change);
+    }
+    else
+    {
+        /* Profile didn't register connection indication call back */
+        bnep_send_conn_responce (p_bcb, resp_code);
+        bnep_connected (p_bcb);
+    }
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         bnep_is_packet_allowed
+**
+** Description      This function verifies whether the protocol passes through
+**                  the protocol filters set by the peer
+**
+** Returns          BNEP_SUCCESS          - if the protocol is allowed
+**                  BNEP_IGNORE_CMD       - if the protocol is filtered out
+**
+*******************************************************************************/
+tBNEP_RESULT bnep_is_packet_allowed (tBNEP_CONN *p_bcb,
+                                     BD_ADDR p_dest_addr,
+                                     UINT16 protocol,
+                                     BOOLEAN fw_ext_present,
+                                     UINT8 *p_data)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    if (p_bcb->rcvd_num_filters)
+    {
+        UINT16          i, proto;
+
+        /* Findout the actual protocol to check for the filtering */
+        proto = protocol;
+        if (proto == BNEP_802_1_P_PROTOCOL)
+        {
+            if (fw_ext_present)
+            {
+                UINT8       len, ext;
+                /* parse the extension headers and findout actual protocol */
+                do {
+
+                    ext     = *p_data++;
+                    len     = *p_data++;
+                    p_data += len;
+
+                } while (ext & 0x80);
+            }
+            p_data += 2;
+            BE_STREAM_TO_UINT16 (proto, p_data);
+        }
+
+        for (i=0; i<p_bcb->rcvd_num_filters; i++)
+        {
+            if ((p_bcb->rcvd_prot_filter_start[i] <= proto) &&
+                (proto <= p_bcb->rcvd_prot_filter_end[i]))
+                break;
+        }
+
+        if (i == p_bcb->rcvd_num_filters)
+        {
+            BNEP_TRACE_DEBUG1 ("Ignoring protocol 0x%x in BNEP data write", proto);
+            return BNEP_IGNORE_CMD;
+        }
+    }
+#endif
+
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    /* Ckeck for multicast address filtering */
+    if ((p_dest_addr[0] & 0x01) &&
+        p_bcb->rcvd_mcast_filters)
+    {
+        UINT16          i;
+
+        /* Check if every multicast should be filtered */
+        if (p_bcb->rcvd_mcast_filters != 0xFFFF)
+        {
+            /* Check if the address is mentioned in the filter range */
+            for (i = 0; i < p_bcb->rcvd_mcast_filters; i++)
+            {
+                if ((memcmp (p_bcb->rcvd_mcast_filter_start[i], p_dest_addr, BD_ADDR_LEN) <= 0) &&
+                    (memcmp (p_bcb->rcvd_mcast_filter_end[i], p_dest_addr, BD_ADDR_LEN) >= 0))
+                    break;
+            }
+        }
+
+        /*
+        ** If every multicast should be filtered or the address is not in the filter range
+        ** drop the packet
+        */
+        if ((p_bcb->rcvd_mcast_filters == 0xFFFF) || (i == p_bcb->rcvd_mcast_filters))
+        {
+            BNEP_TRACE_DEBUG6 ("Ignoring multicast address %x.%x.%x.%x.%x.%x in BNEP data write",
+                p_dest_addr[0], p_dest_addr[1], p_dest_addr[2],
+                p_dest_addr[3], p_dest_addr[4], p_dest_addr[5]);
+            return BNEP_IGNORE_CMD;
+        }
+    }
+#endif
+
+    return BNEP_SUCCESS;
+}
+
+
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_get_uuid32
+**
+** Description      This function returns the 32 bit equivalent of the given UUID
+**
+** Returns          UINT32          - 32 bit equivalent of the UUID
+**
+*******************************************************************************/
+UINT32 bnep_get_uuid32 (tBT_UUID *src_uuid)
+{
+    UINT32      result;
+
+    if (src_uuid->len == 2)
+        return ((UINT32)src_uuid->uu.uuid16);
+    else if (src_uuid->len == 4)
+        return (src_uuid->uu.uuid32 & 0x0000FFFF);
+    else
+    {
+        result = src_uuid->uu.uuid128[2];
+        result = (result << 8) | (src_uuid->uu.uuid128[3]);
+        return result;
+    }
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         bnep_dump_status
+**
+** Description      This function dumps the bnep control block and connection
+**                  blocks information
+**
+** Returns          none
+**
+*******************************************************************************/
+void bnep_dump_status (void)
+{
+#if (defined (BNEP_SUPPORTS_DEBUG_DUMP) && BNEP_SUPPORTS_DEBUG_DUMP == TRUE)
+    UINT16          i;
+    char            buff[200];
+    tBNEP_CONN     *p_bcb;
+
+    BNEP_TRACE_DEBUG6 ("BNEP my BD Addr %x.%x.%x.%x.%x.%x",
+        bnep_cb.my_bda[0], bnep_cb.my_bda[1], bnep_cb.my_bda[2],
+        bnep_cb.my_bda[3], bnep_cb.my_bda[4], bnep_cb.my_bda[5]);
+    BNEP_TRACE_DEBUG3 ("profile registered %d, trace %d, got_my_bd_addr %d",
+        bnep_cb.profile_registered, bnep_cb.trace_level, bnep_cb.got_my_bd_addr);
+
+    for (i = 0, p_bcb = bnep_cb.bcb; i < BNEP_MAX_CONNECTIONS; i++, p_bcb++)
+    {
+        sprintf (buff, "%d state %d, flags 0x%x, cid %d, pfilts %d, mfilts %d, src 0x%x, dst 0x%x, BD %x.%x.%x.%x.%x.%x",
+            i, p_bcb->con_state, p_bcb->con_flags, p_bcb->l2cap_cid,
+            p_bcb->rcvd_num_filters, p_bcb->rcvd_mcast_filters,
+            p_bcb->src_uuid.uu.uuid16, p_bcb->dst_uuid.uu.uuid16,
+            p_bcb->rem_bda[0], p_bcb->rem_bda[1], p_bcb->rem_bda[2],
+            p_bcb->rem_bda[3], p_bcb->rem_bda[4], p_bcb->rem_bda[5]);
+
+        BNEP_TRACE_DEBUG0 (buff);
+    }
+#endif
+}
+
+
diff --git a/stack/btm/btm_acl.c b/stack/btm/btm_acl.c
new file mode 100644
index 0000000..e3ac11b
--- /dev/null
+++ b/stack/btm/btm_acl.c
@@ -0,0 +1,3141 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that handle ACL connections. This includes
+ *  operations such as hold and sniff modes, supported packet types.
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+
+#include "bt_types.h"
+#include "bt_target.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "l2c_int.h"
+#include "hcidefs.h"
+static void btm_establish_continue (tACL_CONN *p_acl_cb);
+
+#define BTM_DEV_REPLY_TIMEOUT   3       /* 3 second timeout waiting for responses */
+
+/*******************************************************************************
+**
+** Function         btm_acl_init
+**
+** Description      This function is called at BTM startup to initialize
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_init (void)
+{
+    BTM_TRACE_DEBUG0 ("btm_acl_init");
+#if 0  /* cleared in btm_init; put back in if called from anywhere else! */
+    memset (&btm_cb.acl_db, 0, sizeof (btm_cb.acl_db));
+#if RFCOMM_INCLUDED == TRUE
+    memset (btm_cb.btm_scn, 0, BTM_MAX_SCN);          /* Initialize the SCN usage to FALSE */
+#endif
+    btm_cb.btm_def_link_policy     = 0;
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_cb.p_bl_changed_cb         = NULL;
+#else
+    btm_cb.p_acl_changed_cb        = NULL;
+#endif
+#endif
+
+    /* Initialize nonzero defaults */
+    btm_cb.btm_def_link_super_tout = HCI_DEFAULT_INACT_TOUT;
+    btm_cb.acl_disc_reason         = 0xff ;
+}
+
+/*******************************************************************************
+**
+** Function         btm_bda_to_acl
+**
+** Description      This function returns the FIRST acl_db entry for the passed BDA.
+**
+** Returns          Returns pointer to the ACL DB for the requested BDA if found.
+**                  NULL if not found.
+**
+*******************************************************************************/
+tACL_CONN *btm_bda_to_acl (BD_ADDR bda)
+{
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+    UINT16       xx;
+    if (bda)
+    {
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++)
+        {
+            if ((p->in_use) && (!memcmp (p->remote_addr, bda, BD_ADDR_LEN)))
+            {
+                BTM_TRACE_DEBUG0 ("btm_bda_to_acl found");
+                return(p);
+            }
+        }
+    }
+    BTM_TRACE_DEBUG0 ("btm_bda_to_acl Not found");
+
+    /* If here, no BD Addr found */
+    return((tACL_CONN *)NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btm_handle_to_acl_index
+**
+** Description      This function returns the FIRST acl_db entry for the passed hci_handle.
+**
+** Returns          index to the acl_db or MAX_L2CAP_LINKS.
+**
+*******************************************************************************/
+UINT8 btm_handle_to_acl_index (UINT16 hci_handle)
+{
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+    UINT8       xx;
+    BTM_TRACE_DEBUG0 ("btm_handle_to_acl_index");
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++)
+    {
+        if ((p->in_use) && (p->hci_handle == hci_handle))
+        {
+            break;
+        }
+    }
+
+    /* If here, no BD Addr found */
+    return(xx);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_acl_created
+**
+** Description      This function is called by L2CAP when an ACL connection
+**                  is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn,
+                      UINT16 hci_handle, UINT8 link_role, UINT8 is_le_link)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    UINT8             yy;
+    tACL_CONN        *p;
+    UINT8             xx;
+
+    BTM_TRACE_DEBUG3 ("btm_acl_created hci_handle=%d link_role=%d  is_le_link=%d",
+                      hci_handle,link_role, is_le_link);
+    /* Ensure we don't have duplicates */
+    p = btm_bda_to_acl(bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        p->hci_handle = hci_handle;
+        p->link_role  = link_role;
+#if BLE_INCLUDED == TRUE
+        p->is_le_link = is_le_link;
+#endif
+        BTM_TRACE_DEBUG6 ("Duplicate btm_acl_created: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                          bda[0], bda[1], bda[2], bda[3], bda[4], bda[5]);
+        BTM_SetLinkPolicy(p->remote_addr, &btm_cb.btm_def_link_policy);
+        return;
+    }
+
+    /* Allocate acl_db entry */
+    for (xx = 0, p = &btm_cb.acl_db[0]; xx < MAX_L2CAP_LINKS; xx++, p++)
+    {
+        if (!p->in_use)
+        {
+            p->in_use            = TRUE;
+            p->hci_handle        = hci_handle;
+            p->link_role         = link_role;
+            p->link_up_issued    = FALSE;
+#if BLE_INCLUDED == TRUE
+            p->is_le_link        = is_le_link;
+#endif
+            p->restore_pkt_types = 0;   /* Only exists while SCO is active */
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+
+#if BTM_PWR_MGR_INCLUDED == FALSE
+            p->mode             = BTM_ACL_MODE_NORMAL;
+#else
+            btm_pm_sm_alloc(xx);
+#endif /* BTM_PWR_MGR_INCLUDED == FALSE */
+
+            memcpy (p->remote_addr, bda, BD_ADDR_LEN);
+
+            if (dc)
+                memcpy (p->remote_dc, dc, DEV_CLASS_LEN);
+
+            if (bdn)
+                memcpy (p->remote_name, bdn, BTM_MAX_REM_BD_NAME_LEN);
+
+
+            /* Check if we already know features for this device */
+            p_dev_rec = btm_find_dev_by_handle (hci_handle);
+
+#if (BLE_INCLUDED == TRUE)
+            if (p_dev_rec )
+            {
+                BTM_TRACE_DEBUG1 ("device_type=0x%x", p_dev_rec->device_type);
+            }
+#endif
+
+
+            if (p_dev_rec
+#if (BLE_INCLUDED == TRUE)
+                && p_dev_rec->device_type != BT_DEVICE_TYPE_BLE
+#endif
+               )
+            {
+
+                /* if BR/EDR do something more */
+                btsnd_hcic_read_rmt_clk_offset (p->hci_handle);
+                btsnd_hcic_rmt_ver_req (p->hci_handle);
+
+                for (yy = 0; yy < BD_FEATURES_LEN; yy++)
+                {
+                    if (p_dev_rec->features[yy])
+                    {
+                        memcpy (p->features, p_dev_rec->features, BD_FEATURES_LEN);
+                        if (BTM_SEC_MODE_SP == btm_cb.security_mode &&
+                            HCI_SIMPLE_PAIRING_SUPPORTED(p->features))
+                        {
+                            /* if SM4 supported, check peer support for SM4
+                             * The remote controller supports SSP according to saved remote features
+                             * read the extended feature page 1 for the host support for SSP */
+                            if (btsnd_hcic_rmt_ext_features (p_dev_rec->hci_handle, 1))
+                                return;
+                        }
+                        /* peer does not support SSP */
+                        p_dev_rec->sm4 |= BTM_SM4_KNOWN;
+
+                        btm_establish_continue (p);
+                        return;
+                    }
+                }
+            }
+#if (BLE_INCLUDED == TRUE)
+            /* If here, features are not known yet */
+            if (p_dev_rec && p_dev_rec->device_type == BT_DEVICE_TYPE_BLE)
+            {
+                btm_establish_continue(p);
+
+                if (link_role == HCI_ROLE_MASTER)
+                {
+                    btm_ble_update_bg_state();
+                    btm_ble_resume_bg_conn (NULL, FALSE);
+
+                    btsnd_hcic_ble_read_remote_feat(p->hci_handle);
+                }
+            }
+            else
+#endif
+            {
+                btsnd_hcic_rmt_features_req (p->hci_handle);
+            }
+
+            /* read page 1 - on rmt feature event for buffer reasons */
+            return;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_acl_report_role_change
+**
+** Description      This function is called when the local device is deemed
+**                  to be down. It notifies L2CAP of the failure.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_report_role_change (UINT8 hci_status, BD_ADDR bda)
+{
+    tBTM_ROLE_SWITCH_CMPL   ref_data;
+    BTM_TRACE_DEBUG0 ("btm_acl_report_role_change");
+    if (btm_cb.devcb.p_switch_role_cb && (bda &&
+                                          (0 == memcmp(btm_cb.devcb.switch_role_ref_data.remote_bd_addr, bda, BD_ADDR_LEN))))
+    {
+        memset (&btm_cb.devcb.switch_role_ref_data, 0, sizeof(tBTM_ROLE_SWITCH_CMPL));
+        ref_data.hci_status = hci_status;
+        memcpy (&ref_data, &btm_cb.devcb.switch_role_ref_data, sizeof(tBTM_ROLE_SWITCH_CMPL));
+        (*btm_cb.devcb.p_switch_role_cb)(&ref_data);
+        btm_cb.devcb.p_switch_role_cb = NULL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_removed
+**
+** Description      This function is called by L2CAP when an ACL connection
+**                  is removed. Since only L2CAP creates ACL links, we use
+**                  the L2CAP link index as our index into the control blocks.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_removed (BD_ADDR bda)
+{
+    tACL_CONN   *p;
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_EVENT_DATA  evt_data;
+#endif
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC *p_dev_rec=NULL;
+    UINT16 combined_mode;
+#endif
+
+    BTM_TRACE_DEBUG0 ("btm_acl_removed");
+    p = btm_bda_to_acl(bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        p->in_use = FALSE;
+
+        /* if the disconnected channel has a pending role switch, clear it now */
+        btm_acl_report_role_change(HCI_ERR_NO_CONNECTION, bda);
+
+        /* Only notify if link up has had a chance to be issued */
+        if (p->link_up_issued)
+        {
+            p->link_up_issued = FALSE;
+
+            /* If anyone cares, tell him database changed */
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+            if (btm_cb.p_bl_changed_cb)
+            {
+                evt_data.event = BTM_BL_DISCN_EVT;
+                evt_data.discn.p_bda = bda;
+
+                (*btm_cb.p_bl_changed_cb)(&evt_data);
+            }
+
+            btm_acl_update_busy_level (BTM_BLI_ACL_DOWN_EVT);
+#else
+            if (btm_cb.p_acl_changed_cb)
+                (*btm_cb.p_acl_changed_cb) (bda, NULL, NULL, NULL, FALSE);
+#endif
+        }
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+
+        BTM_TRACE_DEBUG4 ("acl hci_handle=%d is_le_link=%d connectable_mode=0x%0x link_role=%d",
+                          p->hci_handle,
+                          p->is_le_link,
+                          btm_cb.ble_ctr_cb.inq_var.connectable_mode,
+                          p->link_role);
+
+
+        /* If we are LE connectable, check if we need to start advertising again */
+        if ( p->is_le_link && (btm_cb.ble_ctr_cb.inq_var.connectable_mode != BTM_BLE_NON_CONNECTABLE) )
+        {
+            tACL_CONN   *pa = &btm_cb.acl_db[0];
+            UINT16       xx;
+
+            for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, pa++)
+            {
+                /* If any other LE link is up, we are still not connectable */
+                if (pa->in_use && pa->is_le_link)
+                    return;
+            }
+            combined_mode = (btm_cb.ble_ctr_cb.inq_var.connectable_mode | btm_cb.btm_inq_vars.connectable_mode);
+            btm_ble_set_connectability ( combined_mode );
+        }
+
+        p_dev_rec = btm_find_dev(bda);
+        if ( p_dev_rec)
+        {
+            BTM_TRACE_DEBUG1("before update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags);
+            if (p->is_le_link)
+            {
+                BTM_TRACE_DEBUG0("LE link down");
+                p_dev_rec->sec_flags &= ~(BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED);
+                if ( (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) == 0)
+                {
+                    BTM_TRACE_DEBUG0("Not Bonded");
+                    p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHENTICATED | BTM_SEC_LINK_KEY_AUTHED);
+                }
+                else
+                {
+                    BTM_TRACE_DEBUG0("Bonded");
+                }
+            }
+            else
+            {
+                BTM_TRACE_DEBUG0("Bletooth link down");
+                p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED);
+            }
+            BTM_TRACE_DEBUG1("after update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags);
+        }
+        else
+        {
+            BTM_TRACE_ERROR0("Device not found");
+
+        }
+#endif
+
+        return;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_acl_device_down
+**
+** Description      This function is called when the local device is deemed
+**                  to be down. It notifies L2CAP of the failure.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_device_down (void)
+{
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+    UINT16      xx;
+    BTM_TRACE_DEBUG0 ("btm_acl_device_down");
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++)
+    {
+        if (p->in_use)
+        {
+            BTM_TRACE_DEBUG1 ("hci_handle=%d HCI_ERR_HW_FAILURE ",p->hci_handle );
+            l2c_link_hci_disc_comp (p->hci_handle, HCI_ERR_HW_FAILURE);
+        }
+    }
+}
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btm_acl_update_busy_level
+**
+** Description      This function is called to update the busy level of the system
+**                  .
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_update_busy_level (tBTM_BLI_EVENT event)
+{
+    tBTM_BL_UPDATE_DATA  evt;
+    UINT8 busy_level;
+    BTM_TRACE_DEBUG0 ("btm_acl_update_busy_level");
+    switch (event)
+    {
+        case BTM_BLI_ACL_UP_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_ACL_UP_EVT");
+            btm_cb.num_acl++;
+            busy_level = (UINT8)btm_cb.num_acl;
+            break;
+        case BTM_BLI_ACL_DOWN_EVT:
+            if (btm_cb.num_acl)
+            {
+                btm_cb.num_acl--;
+                BTM_TRACE_DEBUG1 ("BTM_BLI_ACL_DOWN_EVT", btm_cb.num_acl);
+            }
+            else
+            {
+                BTM_TRACE_ERROR0 ("BTM_BLI_ACL_DOWN_EVT issued, but num_acl already zero !!!");
+            }
+            busy_level = (UINT8)btm_cb.num_acl;
+            break;
+        case BTM_BLI_PAGE_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_PAGE_EVT");
+            btm_cb.is_paging = TRUE;
+            busy_level = BTM_BL_PAGING_STARTED;
+            break;
+        case BTM_BLI_PAGE_DONE_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_PAGE_DONE_EVT");
+            btm_cb.is_paging = FALSE;
+            busy_level = BTM_BL_PAGING_COMPLETE;
+            break;
+        case BTM_BLI_INQ_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_INQ_EVT");
+            btm_cb.is_inquiry = TRUE;
+            busy_level = BTM_BL_INQUIRY_STARTED;
+            break;
+        case BTM_BLI_INQ_CANCEL_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_INQ_CANCEL_EVT");
+            btm_cb.is_inquiry = FALSE;
+            busy_level = BTM_BL_INQUIRY_CANCELLED;
+            break;
+        case BTM_BLI_INQ_DONE_EVT:
+            BTM_TRACE_DEBUG0 ("BTM_BLI_INQ_DONE_EVT");
+            btm_cb.is_inquiry = FALSE;
+            busy_level = BTM_BL_INQUIRY_COMPLETE;
+            break;
+    }
+
+    if (busy_level != btm_cb.busy_level)
+    {
+        evt.event         = BTM_BL_UPDATE_EVT;
+        evt.busy_level    = busy_level;
+        btm_cb.busy_level = busy_level;
+        if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_UPDATE_MASK))
+        {
+            (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt);
+        }
+    }
+}
+#endif
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetRole
+**
+** Description      This function is called to get the role of the local device
+**                  for the ACL connection with the specified remote device
+**
+** Returns          BTM_SUCCESS if connection exists.
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**
+*******************************************************************************/
+tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, UINT8 *p_role)
+{
+    tACL_CONN   *p;
+    BTM_TRACE_DEBUG0 ("BTM_GetRole");
+    if ((p = btm_bda_to_acl(remote_bd_addr)) == NULL)
+    {
+        *p_role = BTM_ROLE_UNDEFINED;
+        return(BTM_UNKNOWN_ADDR);
+    }
+
+    /* Get the current role */
+    *p_role = p->link_role;
+    return(BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SwitchRole
+**
+** Description      This function is called to switch role between master and
+**                  slave.  If role is already set it will do nothing.  If the
+**                  command was initiated, the callback function is called upon
+**                  completion.
+**
+** Returns          BTM_SUCCESS if already in specified role.
+**                  BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_MODE_UNSUPPORTED if local device does not support role switching
+**                  BTM_BUSY if the previous command is not completed
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr, UINT8 new_role, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+    tBTM_SEC_DEV_REC  *p_dev_rec = NULL;
+#if BTM_SCO_INCLUDED == TRUE
+    BOOLEAN    is_sco_active;
+#endif
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    tBTM_STATUS  status;
+    tBTM_PM_MODE pwr_mode;
+    tBTM_PM_PWR_MD settings;
+#endif
+#if (BT_USE_TRACES == TRUE)
+    BD_ADDR_PTR  p_bda;
+#endif
+    BTM_TRACE_API6 ("BTM_SwitchRole BDA: %02x-%02x-%02x-%02x-%02x-%02x",
+                    remote_bd_addr[0], remote_bd_addr[1], remote_bd_addr[2],
+                    remote_bd_addr[3], remote_bd_addr[4], remote_bd_addr[5]);
+
+    /* Make sure the local device supports switching */
+    if (!(HCI_SWITCH_SUPPORTED(btm_cb.devcb.local_features)))
+        return(BTM_MODE_UNSUPPORTED);
+
+    if (btm_cb.devcb.p_switch_role_cb && p_cb)
+    {
+#if (BT_USE_TRACES == TRUE)
+        p_bda = btm_cb.devcb.switch_role_ref_data.remote_bd_addr;
+        BTM_TRACE_DEBUG6 ("Role switch on other device is in progress 0x%02x%02x%02x%02x%02x%02x",
+                          p_bda[0], p_bda[1], p_bda[2],
+                          p_bda[3], p_bda[4], p_bda[5]);
+#endif
+        return(BTM_BUSY);
+    }
+
+    if ((p = btm_bda_to_acl(remote_bd_addr)) == NULL)
+        return(BTM_UNKNOWN_ADDR);
+
+    /* Finished if already in desired role */
+    if (p->link_role == new_role)
+        return(BTM_SUCCESS);
+
+#if BTM_SCO_INCLUDED == TRUE
+    /* Check if there is any SCO Active on this BD Address */
+    is_sco_active = btm_is_sco_active_by_bdaddr(remote_bd_addr);
+
+    if (is_sco_active == TRUE)
+        return(BTM_NO_RESOURCES);
+#endif
+
+    /* Ignore role switch request if the previous request was not completed */
+    if (p->switch_role_state != BTM_ACL_SWKEY_STATE_IDLE)
+    {
+        BTM_TRACE_DEBUG1 ("BTM_SwitchRole busy: %d",
+                          p->switch_role_state);
+        return(BTM_BUSY);
+    }
+
+    /* Cannot switch role while parked or sniffing */
+#if BTM_PWR_MGR_INCLUDED == FALSE
+    if (p->mode == HCI_MODE_PARK)
+    {
+        if (!btsnd_hcic_exit_park_mode (p->hci_handle))
+            return(BTM_NO_RESOURCES);
+
+        p->switch_role_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE;
+    }
+    else if (p->mode == HCI_MODE_SNIFF)
+    {
+        if (!btsnd_hcic_exit_sniff_mode (p->hci_handle))
+            return(BTM_NO_RESOURCES);
+
+        p->switch_role_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE;
+    }
+#else   /* power manager is in use */
+
+    if ((status = BTM_ReadPowerMode(p->remote_addr, &pwr_mode)) != BTM_SUCCESS)
+        return(status);
+
+    /* Wake up the link if in sniff or park before attempting switch */
+    if (pwr_mode == BTM_PM_MD_PARK || pwr_mode == BTM_PM_MD_SNIFF)
+    {
+/* Coverity FALSE-POSITIVE error from Coverity tool. Please do NOT remove following comment.     */
+/* coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode
+                                the other data members of tBTM_PM_PWR_MD are ignored
+*/
+        settings.mode = BTM_PM_MD_ACTIVE;
+        status = BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p->remote_addr, &settings);
+        if (status != BTM_CMD_STARTED)
+            return(BTM_WRONG_MODE);
+
+        p->switch_role_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE;
+    }
+#endif
+    /* some devices do not support switch while encryption is on */
+    else
+    {
+        if (((p_dev_rec = btm_find_dev (remote_bd_addr)) != NULL)
+            && ((p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) != 0)
+            && !BTM_EPR_AVAILABLE(p))
+        {
+            /* bypass turning off encryption if change link key is already doing it */
+            if (p->encrypt_state != BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF)
+            {
+                if (!btsnd_hcic_set_conn_encrypt (p->hci_handle, FALSE))
+                    return(BTM_NO_RESOURCES);
+                else
+                    p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF;
+            }
+
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF;
+        }
+        else
+        {
+            if (!btsnd_hcic_switch_role (remote_bd_addr, new_role))
+                return(BTM_NO_RESOURCES);
+
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS;
+
+#if BTM_DISC_DURING_RS == TRUE
+            if (p_dev_rec)
+                p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING;
+#endif
+        }
+    }
+
+    /* Initialize return structure in case request fails */
+    if (p_cb)
+    {
+        memcpy (btm_cb.devcb.switch_role_ref_data.remote_bd_addr, remote_bd_addr,
+                BD_ADDR_LEN);
+        btm_cb.devcb.switch_role_ref_data.role = new_role;
+        /* initialized to an error code */
+        btm_cb.devcb.switch_role_ref_data.hci_status = HCI_ERR_UNSUPPORTED_VALUE;
+        btm_cb.devcb.p_switch_role_cb = p_cb;
+    }
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ChangeLinkKey
+**
+** Description      This function is called to change the link key of the
+**                  connection.
+**
+** Returns          BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_BUSY if the previous command is not completed
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ChangeLinkKey (BD_ADDR remote_bd_addr, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+    tBTM_SEC_DEV_REC  *p_dev_rec = NULL;
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    tBTM_STATUS  status;
+    tBTM_PM_MODE pwr_mode;
+    tBTM_PM_PWR_MD settings;
+#endif
+    BTM_TRACE_DEBUG0 ("BTM_ChangeLinkKey");
+    if ((p = btm_bda_to_acl(remote_bd_addr)) == NULL)
+        return(BTM_UNKNOWN_ADDR);
+
+    /* Ignore change link key request if the previsous request has not completed */
+    if (p->change_key_state != BTM_ACL_SWKEY_STATE_IDLE)
+    {
+        BTM_TRACE_DEBUG0 ("Link key change request declined since the previous request for this device has not completed ");
+        return(BTM_BUSY);
+    }
+
+    memset (&btm_cb.devcb.chg_link_key_ref_data, 0, sizeof(tBTM_CHANGE_KEY_CMPL));
+
+    /* Cannot change key while parked */
+#if BTM_PWR_MGR_INCLUDED == FALSE
+    if (p->mode == HCI_MODE_PARK)
+    {
+        if (!btsnd_hcic_exit_park_mode (p->hci_handle))
+            return(BTM_NO_RESOURCES);
+
+        p->change_key_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE;
+    }
+#else   /* power manager is in use */
+
+
+    if ((status = BTM_ReadPowerMode(p->remote_addr, &pwr_mode)) != BTM_SUCCESS)
+        return(status);
+
+    /* Wake up the link if in park before attempting to change link keys */
+    if (pwr_mode == BTM_PM_MD_PARK)
+    {
+/* Coverity: FALSE-POSITIVE error from Coverity tool. Please do NOT remove following comment. */
+/* coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode
+                                the other data members of tBTM_PM_PWR_MD are ignored
+*/
+        settings.mode = BTM_PM_MD_ACTIVE;
+        status = BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p->remote_addr, &settings);
+        if (status != BTM_CMD_STARTED)
+            return(BTM_WRONG_MODE);
+
+        p->change_key_state = BTM_ACL_SWKEY_STATE_MODE_CHANGE;
+    }
+#endif
+    /* some devices do not support change of link key while encryption is on */
+    else if (((p_dev_rec = btm_find_dev (remote_bd_addr)) != NULL)
+             && ((p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) != 0) && !BTM_EPR_AVAILABLE(p))
+    {
+        /* bypass turning off encryption if switch role is already doing it */
+        if (p->encrypt_state != BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF)
+        {
+            if (!btsnd_hcic_set_conn_encrypt (p->hci_handle, FALSE))
+                return(BTM_NO_RESOURCES);
+            else
+                p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF;
+        }
+
+        p->change_key_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF;
+    }
+    else    /* Ok to initiate change of link key */
+    {
+        if (!btsnd_hcic_change_link_key (p->hci_handle))
+            return(BTM_NO_RESOURCES);
+
+        p->change_key_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS;
+    }
+
+    /* Initialize return structure in case request fails */
+    memcpy (btm_cb.devcb.chg_link_key_ref_data.remote_bd_addr, remote_bd_addr,
+            BD_ADDR_LEN);
+    btm_cb.devcb.p_chg_link_key_cb = p_cb;
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_link_key_change
+**
+** Description      This function is called to when a change link key event
+**                  is received.
+**
+*******************************************************************************/
+void btm_acl_link_key_change (UINT16 handle, UINT8 status)
+{
+    tBTM_CHANGE_KEY_CMPL *p_data;
+    tACL_CONN            *p;
+    UINT8                xx;
+    BTM_TRACE_DEBUG0 ("btm_acl_link_key_change");
+    /* Look up the connection by handle and set the current mode */
+    xx = btm_handle_to_acl_index(handle);
+
+    /* don't assume that we can never get a bad hci_handle */
+    if (xx >= MAX_L2CAP_LINKS)
+        return;
+
+    p_data = &btm_cb.devcb.chg_link_key_ref_data;
+    p = &btm_cb.acl_db[xx];
+    p_data->hci_status = status;
+
+    /* if switching state is switching we need to turn encryption on */
+    /* if idle, we did not change encryption */
+    if (p->change_key_state == BTM_ACL_SWKEY_STATE_SWITCHING)
+    {
+        /* Make sure there's not also a role switch going on before re-enabling */
+        if (p->switch_role_state != BTM_ACL_SWKEY_STATE_SWITCHING)
+        {
+            if (btsnd_hcic_set_conn_encrypt (p->hci_handle, TRUE))
+            {
+                p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON;
+                p->change_key_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_ON;
+                return;
+            }
+        }
+        else    /* Set the state and wait for change link key */
+        {
+            p->change_key_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_ON;
+            return;
+        }
+    }
+
+    /* Set the switch_role_state to IDLE since the reply received from HCI */
+    /* regardless of its result either success or failed. */
+    if (p->change_key_state == BTM_ACL_SWKEY_STATE_IN_PROGRESS)
+    {
+        p->change_key_state = BTM_ACL_SWKEY_STATE_IDLE;
+        p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+    }
+
+    if (btm_cb.devcb.p_chg_link_key_cb)
+    {
+        (*btm_cb.devcb.p_chg_link_key_cb)((void *)p_data);
+        btm_cb.devcb.p_chg_link_key_cb = NULL;
+    }
+
+    BTM_TRACE_ERROR2("Change Link Key Complete Event: Handle 0x%02x, HCI Status 0x%02x",
+                     handle, p_data->hci_status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_encrypt_change
+**
+** Description      This function is when encryption of the connection is
+**                  completed by the LM.  Checks to see if a role switch or
+**                  change of link key was active and initiates or continues
+**                  process if needed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable)
+{
+    tACL_CONN *p;
+    UINT8     xx;
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_ROLE_CHG_DATA   evt;
+#endif
+#if BTM_DISC_DURING_RS == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+#endif
+    BTM_TRACE_DEBUG3 ("btm_acl_encrypt_change handle=%d status=%d encr_enabl=%d", handle, status, encr_enable);
+    xx = btm_handle_to_acl_index(handle);
+    /* don't assume that we can never get a bad hci_handle */
+    if (xx < MAX_L2CAP_LINKS)
+        p = &btm_cb.acl_db[xx];
+    else
+        return;
+
+    /* Process Role Switch if active */
+    if (p->switch_role_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF)
+    {
+        /* if encryption turn off failed we still will try to switch role */
+        if (encr_enable)
+        {
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+        }
+        else
+        {
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_SWITCHING;
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_TEMP_FUNC;
+        }
+
+        if (!btsnd_hcic_switch_role (p->remote_addr, (UINT8)!p->link_role))
+        {
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+            btm_acl_report_role_change(btm_cb.devcb.switch_role_ref_data.hci_status, p->remote_addr);
+        }
+#if BTM_DISC_DURING_RS == TRUE
+        else
+        {
+            if ((p_dev_rec = btm_find_dev (p->remote_addr)) != NULL)
+                p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING;
+        }
+#endif
+
+    }
+    /* Finished enabling Encryption after role switch */
+    else if (p->switch_role_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_ON)
+    {
+        p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+        p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+        btm_acl_report_role_change(btm_cb.devcb.switch_role_ref_data.hci_status, p->remote_addr);
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+        /* if role change event is registered, report it now */
+        if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_ROLE_CHG_MASK))
+        {
+            evt.event       = BTM_BL_ROLE_CHG_EVT;
+            evt.new_role    = btm_cb.devcb.switch_role_ref_data.role;
+            evt.p_bda       = btm_cb.devcb.switch_role_ref_data.remote_bd_addr;
+            evt.hci_status  = btm_cb.devcb.switch_role_ref_data.hci_status;
+            (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt);
+
+            BTM_TRACE_DEBUG3("Role Switch Event: new_role 0x%02x, HCI Status 0x%02x, rs_st:%d",
+                             evt.new_role, evt.hci_status, p->switch_role_state);
+        }
+#endif
+
+#if BTM_DISC_DURING_RS == TRUE
+        /* If a disconnect is pending, issue it now that role switch has completed */
+        if ((p_dev_rec = btm_find_dev (p->remote_addr)) != NULL)
+        {
+            if (p_dev_rec->rs_disc_pending == BTM_SEC_DISC_PENDING)
+            {
+                BTM_TRACE_WARNING0("btm_acl_encrypt_change -> Issuing delayed HCI_Disconnect!!!");
+                btsnd_hcic_disconnect(p_dev_rec->hci_handle, HCI_ERR_PEER_USER);
+            }
+            BTM_TRACE_ERROR2("btm_acl_encrypt_change: tBTM_SEC_DEV:0x%x rs_disc_pending=%d",
+                (UINT32)p_dev_rec, p_dev_rec->rs_disc_pending);
+            p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING;     /* reset flag */
+        }
+#endif
+    }
+
+
+    /* Process Change Link Key if active */
+    if (p->change_key_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF)
+    {
+        /* if encryption turn off failed we still will try to change link key */
+        if (encr_enable)
+        {
+            p->change_key_state = BTM_ACL_SWKEY_STATE_IDLE;
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+        }
+        else
+        {
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_TEMP_FUNC;
+            p->change_key_state = BTM_ACL_SWKEY_STATE_SWITCHING;
+        }
+
+        if (!btsnd_hcic_change_link_key (p->hci_handle))
+        {
+            p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+            p->change_key_state = BTM_ACL_SWKEY_STATE_IDLE;
+            if (btm_cb.devcb.p_chg_link_key_cb)
+            {
+                (*btm_cb.devcb.p_chg_link_key_cb)(&btm_cb.devcb.chg_link_key_ref_data);
+                btm_cb.devcb.p_chg_link_key_cb = NULL;
+            }
+        }
+    }
+    /* Finished enabling Encryption after changing link key */
+    else if (p->change_key_state == BTM_ACL_SWKEY_STATE_ENCRYPTION_ON)
+    {
+        p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+        p->change_key_state = BTM_ACL_SWKEY_STATE_IDLE;
+        if (btm_cb.devcb.p_chg_link_key_cb)
+        {
+            (*btm_cb.devcb.p_chg_link_key_cb)(&btm_cb.devcb.chg_link_key_ref_data);
+            btm_cb.devcb.p_chg_link_key_cb = NULL;
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         BTM_SetLinkPolicy
+**
+** Description      Create and send HCI "Write Policy Set" command
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda, UINT16 *settings)
+{
+    tACL_CONN   *p;
+    UINT8       *localFeatures = BTM_ReadLocalFeatures();
+    BTM_TRACE_DEBUG0 ("BTM_SetLinkPolicy");
+/*    BTM_TRACE_API1 ("BTM_SetLinkPolicy: requested settings: 0x%04x", *settings ); */
+
+    /* First, check if hold mode is supported */
+    if (*settings != HCI_DISABLE_ALL_LM_MODES)
+    {
+        if ( (*settings & HCI_ENABLE_MASTER_SLAVE_SWITCH) && (!HCI_SWITCH_SUPPORTED(localFeatures)) )
+        {
+            *settings &= (~HCI_ENABLE_MASTER_SLAVE_SWITCH);
+            BTM_TRACE_API1 ("BTM_SetLinkPolicy switch not supported (settings: 0x%04x)", *settings );
+        }
+        if ( (*settings & HCI_ENABLE_HOLD_MODE) && (!HCI_HOLD_MODE_SUPPORTED(localFeatures)) )
+        {
+            *settings &= (~HCI_ENABLE_HOLD_MODE);
+            BTM_TRACE_API1 ("BTM_SetLinkPolicy hold not supported (settings: 0x%04x)", *settings );
+        }
+        if ( (*settings & HCI_ENABLE_SNIFF_MODE) && (!HCI_SNIFF_MODE_SUPPORTED(localFeatures)) )
+        {
+            *settings &= (~HCI_ENABLE_SNIFF_MODE);
+            BTM_TRACE_API1 ("BTM_SetLinkPolicy sniff not supported (settings: 0x%04x)", *settings );
+        }
+        if ( (*settings & HCI_ENABLE_PARK_MODE) && (!HCI_PARK_MODE_SUPPORTED(localFeatures)) )
+        {
+            *settings &= (~HCI_ENABLE_PARK_MODE);
+            BTM_TRACE_API1 ("BTM_SetLinkPolicy park not supported (settings: 0x%04x)", *settings );
+        }
+    }
+
+    if ((p = btm_bda_to_acl(remote_bda)) != NULL)
+        return(btsnd_hcic_write_policy_set (p->hci_handle, *settings) ? BTM_CMD_STARTED : BTM_NO_RESOURCES);
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetDefaultLinkPolicy
+**
+** Description      Set the default value for HCI "Write Policy Set" command
+**                  to use when an ACL link is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetDefaultLinkPolicy (UINT16 settings)
+{
+    BTM_TRACE_DEBUG0 ("BTM_SetDefaultLinkPolicy");
+    btm_cb.btm_def_link_policy = settings;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLinkPolicy
+**
+** Description      This function is called to read the link policy settings.
+**                  The address of link policy results are returned in the callback.
+**                  (tBTM_LNK_POLICY_RESULTS)
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLinkPolicy (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadLinkPolicy: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    /* If someone already waiting on the version, do not allow another */
+    if (btm_cb.devcb.p_rlinkp_cmpl_cb)
+        return(BTM_BUSY);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        btu_start_timer (&btm_cb.devcb.rlinkp_timer, BTU_TTYPE_BTM_ACL, BTM_DEV_REPLY_TIMEOUT);
+        btm_cb.devcb.p_rlinkp_cmpl_cb = p_cb;
+
+        if (!btsnd_hcic_read_policy_set (p->hci_handle))
+        {
+            btu_stop_timer (&btm_cb.devcb.rlinkp_timer);
+            btm_cb.devcb.p_rlinkp_cmpl_cb = NULL;
+            return(BTM_NO_RESOURCES);
+        }
+
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_link_policy_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read local link policy request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_link_policy_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_rlinkp_cmpl_cb;
+    tBTM_LNK_POLICY_RESULTS  lnkpol;
+    UINT16                   handle;
+    tACL_CONN               *p_acl_cb = &btm_cb.acl_db[0];
+    UINT16                   index;
+    BTM_TRACE_DEBUG0 ("btm_read_link_policy_complete");
+    btu_stop_timer (&btm_cb.devcb.rlinkp_timer);
+
+    /* If there was a callback address for read local version, call it */
+    btm_cb.devcb.p_rlinkp_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (lnkpol.hci_status, p);
+
+        if (lnkpol.hci_status == HCI_SUCCESS)
+        {
+            lnkpol.status = BTM_SUCCESS;
+
+            STREAM_TO_UINT16 (handle, p);
+
+            STREAM_TO_UINT16 (lnkpol.settings, p);
+
+            /* Search through the list of active channels for the correct BD Addr */
+            for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++)
+            {
+                if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle))
+                {
+                    memcpy (lnkpol.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN);
+                    break;
+                }
+            }
+        }
+        else
+            lnkpol.status = BTM_ERR_PROCESSING;
+
+        (*p_cb)(&lnkpol);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_remote_version_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the remote version info.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_remote_version_complete (UINT8 *p)
+{
+    tACL_CONN        *p_acl_cb = &btm_cb.acl_db[0];
+    UINT8             status;
+    UINT16            handle;
+    int               xx;
+    BTM_TRACE_DEBUG0 ("btm_read_remote_version_complete");
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT16 (handle, p);
+
+        /* Look up the connection by handle and copy features */
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++)
+        {
+            if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle))
+            {
+                STREAM_TO_UINT8  (p_acl_cb->lmp_version, p);
+                STREAM_TO_UINT16 (p_acl_cb->manufacturer, p);
+                STREAM_TO_UINT16 (p_acl_cb->lmp_subversion, p);
+                break;
+            }
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_remote_features_complete
+**
+** Description      This function is called when the remote extended features
+**                  complete event is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_remote_features_complete (UINT8 *p)
+{
+    tACL_CONN        *p_acl_cb = &btm_cb.acl_db[0];
+    UINT8             status;
+    UINT16            handle;
+    int               xx, yy;
+    UINT8             req_pend;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BTM_TRACE_DEBUG0 ("btm_read_remote_features_complete");
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT16 (handle, p);
+
+        /* Look up the connection by handle and copy features */
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++)
+        {
+            if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle))
+            {
+                for (yy = 0; yy < BD_FEATURES_LEN; yy++)
+                    STREAM_TO_UINT8 (p_acl_cb->features[yy], p);
+
+                p_dev_rec = btm_find_dev_by_handle (handle);
+                if (!p_dev_rec)
+                {
+                    /* Get a new device; might be doing dedicated bonding */
+                    p_dev_rec = btm_find_or_alloc_dev (p_acl_cb->remote_addr);
+                }
+
+                memcpy (p_dev_rec->features, p_acl_cb->features, BD_FEATURES_LEN);
+
+                if (BTM_SEC_MODE_SP == btm_cb.security_mode &&
+                    HCI_SIMPLE_PAIRING_SUPPORTED(p_acl_cb->features))
+                {
+                    /* if SM4 supported, check peer support for SM4
+                     * The remote controller supports SSP
+                     * read the extended feature page 1 for the host support for SSP */
+                    if (btsnd_hcic_rmt_ext_features (handle, 1))
+                        break;
+                }
+                else
+                {
+                    req_pend = (p_dev_rec->sm4 & BTM_SM4_REQ_PEND);
+                    p_dev_rec->sm4 = BTM_SM4_KNOWN;
+                    if (req_pend)
+                    {
+                        l2cu_resubmit_pending_sec_req (p_dev_rec->bd_addr);
+                    }
+                }
+
+                btm_establish_continue (p_acl_cb);
+                break;
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_remote_ext_features_complete
+**
+** Description      This function is called when the remote extended features
+**                  complete event is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_remote_ext_features_complete (UINT8 *p)
+{
+    tACL_CONN        *p_acl_cb = &btm_cb.acl_db[0];
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    UINT8             status, page_num, max_page;
+    UINT16            handle;
+    int               xx;
+    BD_FEATURES       ext_features;       /* extended Features suported by the device    */
+    UINT8             req_pend;
+    BTM_TRACE_DEBUG0 ("btm_read_remote_ext_features_complete");
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT16 (handle, p);
+
+        /* Look up the connection by handle and copy features */
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++)
+        {
+            if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle))
+            {
+                STREAM_TO_UINT8  (page_num, p);
+                STREAM_TO_UINT8  (max_page, p);
+                p_dev_rec = btm_find_dev_by_handle (handle);
+                if (!p_dev_rec)
+                    p_dev_rec = btm_find_or_alloc_dev (p_acl_cb->remote_addr);
+
+                req_pend = (p_dev_rec->sm4 & BTM_SM4_REQ_PEND);
+
+                if (page_num == 1 && max_page >= 1)
+                {
+                    /* only the byte 0 of page 1 is used right now */
+                    STREAM_TO_UINT8 (ext_features[0], p);
+
+                    if (HCI_SSP_HOST_SUPPORTED(ext_features))
+                    {
+                        p_dev_rec->sm4 = BTM_SM4_TRUE;
+                    }
+                }
+
+                BTM_TRACE_API5 ("ext_features_complt page_num:%d max_page:%d f[0]:x%02x, sm4:%x, pend:%d",
+                                page_num, max_page, *p, p_dev_rec->sm4, req_pend);
+
+                if (!BTM_SEC_IS_SM4(p_dev_rec->sm4))
+                {
+                    p_dev_rec->sm4 = BTM_SM4_KNOWN;
+                }
+
+                if (req_pend)
+                    l2cu_resubmit_pending_sec_req (p_dev_rec->bd_addr);
+
+                btm_establish_continue (p_acl_cb);
+
+                break;
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_remote_ext_features_failed
+**
+** Description      This function is called when the remote extended features
+**                  complete event returns a failed status.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_remote_ext_features_failed (UINT8 status)
+{
+    BTM_TRACE_ERROR1 ("btm_read_remote_ext_features_failed (status 0x%02x)", status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_establish_continue
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read local link policy request.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_establish_continue (tACL_CONN *p_acl_cb)
+{
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_EVENT_DATA  evt_data;
+#endif
+    BTM_TRACE_DEBUG0 ("btm_establish_continue");
+#if (!defined(BTM_BYPASS_EXTRA_ACL_SETUP) || BTM_BYPASS_EXTRA_ACL_SETUP == FALSE)
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+    if (!p_acl_cb->is_le_link)
+#endif
+    {
+        /* For now there are a some devices that do not like sending */
+        /* commands events and data at the same time. */
+        /* Set the packet types to the default allowed by the device */
+        btm_set_packet_types (p_acl_cb, btm_cb.btm_acl_pkt_types_supported);
+
+        if (btm_cb.btm_def_link_policy)
+            BTM_SetLinkPolicy (p_acl_cb->remote_addr, &btm_cb.btm_def_link_policy);
+
+        BTM_SetLinkSuperTout (p_acl_cb->remote_addr, btm_cb.btm_def_link_super_tout);
+    }
+#endif
+    p_acl_cb->link_up_issued = TRUE;
+
+    /* If anyone cares, tell him database changed */
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    if (btm_cb.p_bl_changed_cb)
+    {
+        evt_data.event = BTM_BL_CONN_EVT;
+        evt_data.conn.p_bda = p_acl_cb->remote_addr;
+        evt_data.conn.p_bdn = p_acl_cb->remote_name;
+        evt_data.conn.p_dc  = p_acl_cb->remote_dc;
+        evt_data.conn.p_features = p_acl_cb->features;
+
+
+        (*btm_cb.p_bl_changed_cb)(&evt_data);
+    }
+    btm_acl_update_busy_level (BTM_BLI_ACL_UP_EVT);
+#else
+    if (btm_cb.p_acl_changed_cb)
+        (*btm_cb.p_acl_changed_cb) (p_acl_cb->remote_addr,
+                                    p_acl_cb->remote_dc,
+                                    p_acl_cb->remote_name,
+                                    p_acl_cb->features,
+                                    TRUE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetDefaultLinkSuperTout
+**
+** Description      Set the default value for HCI "Write Link Supervision Timeout"
+**                  command to use when an ACL link is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetDefaultLinkSuperTout (UINT16 timeout)
+{
+    BTM_TRACE_DEBUG0 ("BTM_SetDefaultLinkSuperTout");
+    btm_cb.btm_def_link_super_tout = timeout;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetLinkSuperTout
+**
+** Description      Create and send HCI "Write Link Supervision Timeout" command
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda, UINT16 timeout)
+{
+    tACL_CONN   *p = btm_bda_to_acl(remote_bda);
+
+    BTM_TRACE_DEBUG0 ("BTM_SetLinkSuperTout");
+    if (p != (tACL_CONN *)NULL)
+    {
+        p->link_super_tout = timeout;
+
+        /* Only send if current role is Master; 2.0 spec requires this */
+        if (p->link_role == BTM_ROLE_MASTER)
+        {
+            if (!btsnd_hcic_write_link_super_tout (LOCAL_BR_EDR_CONTROLLER_ID,
+                                                   p->hci_handle, timeout))
+                return(BTM_NO_RESOURCES);
+
+            return(BTM_CMD_STARTED);
+        }
+        else
+            return(BTM_SUCCESS);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RegForLstoEvt
+**
+** Description      register for the HCI "Link Supervision Timeout Change" event
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_RegForLstoEvt (tBTM_LSTO_CBACK *p_cback)
+{
+    BTM_TRACE_DEBUG0 ("BTM_RegForLstoEvt");
+    btm_cb.p_lsto_cback = p_cback;
+}
+
+/*******************************************************************************
+**
+** Function         btm_proc_lsto_evt
+**
+** Description      process the HCI "Link Supervision Timeout Change" event
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout)
+{
+    UINT8 xx;
+
+    BTM_TRACE_DEBUG0 ("btm_proc_lsto_evt");
+    if (btm_cb.p_lsto_cback)
+    {
+        /* Look up the connection by handle and set the current mode */
+        xx = btm_handle_to_acl_index(handle);
+
+        /* don't assume that we can never get a bad hci_handle */
+        if (xx < MAX_L2CAP_LINKS)
+        {
+            (*btm_cb.p_lsto_cback)(btm_cb.acl_db[xx].remote_addr, timeout);
+        }
+    }
+}
+
+#if BTM_PWR_MGR_INCLUDED == FALSE
+/*******************************************************************************
+**
+** Function         BTM_SetHoldMode
+**
+** Description      This function is called to set a connection into hold mode.
+**                  A check is made if the connection is in sniff or park mode,
+**                  and if yes, the hold mode is ignored.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetHoldMode (BD_ADDR remote_bda, UINT16 min_interval, UINT16 max_interval)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_DEBUG0 ("BTM_SetHoldMode");
+    /* First, check if hold mode is supported */
+    if (!HCI_HOLD_MODE_SUPPORTED(BTM_ReadLocalFeatures()))
+        return(BTM_MODE_UNSUPPORTED);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        /* If the connection is in park or sniff mode, forget about holding it */
+        if (p->mode != BTM_ACL_MODE_NORMAL)
+            return(BTM_SUCCESS);
+
+        if (!btsnd_hcic_hold_mode (p->hci_handle, max_interval, min_interval))
+            return(BTM_NO_RESOURCES);
+
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetSniffMode
+**
+** Description      This function is called to set a connection into sniff mode.
+**                  A check is made if the connection is already in sniff or park
+**                  mode, and if yes, the sniff mode is ignored.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetSniffMode (BD_ADDR remote_bda, UINT16 min_period, UINT16 max_period,
+                              UINT16 attempt, UINT16 timeout)
+{
+    tACL_CONN   *p;
+    BTM_TRACE_DEBUG0 ("BTM_SetSniffMode");
+    /* First, check if sniff mode is supported */
+    if (!HCI_SNIFF_MODE_SUPPORTED(BTM_ReadLocalFeatures()))
+        return(BTM_MODE_UNSUPPORTED);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        /* If the connection is in park mode, forget about sniffing it */
+        if (p->mode != BTM_ACL_MODE_NORMAL)
+            return(BTM_WRONG_MODE);
+
+        if (!btsnd_hcic_sniff_mode (p->hci_handle, max_period,
+                                    min_period, attempt, timeout))
+            return(BTM_NO_RESOURCES);
+
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelSniffMode
+**
+** Description      This function is called to put a connection out of sniff mode.
+**                  A check is made if the connection is already in sniff mode,
+**                  and if not, the cancel sniff mode is ignored.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_CancelSniffMode (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p = btm_bda_to_acl(remote_bda);
+    BTM_TRACE_DEBUG0 ("BTM_CancelSniffMode ");
+    if (p == (tACL_CONN *)NULL)
+        return(BTM_UNKNOWN_ADDR);
+
+    /* If the connection is not in sniff mode, cannot cancel */
+    if (p->mode != BTM_ACL_MODE_SNIFF)
+        return(BTM_WRONG_MODE);
+
+    if (!btsnd_hcic_exit_sniff_mode (p->hci_handle))
+        return(BTM_NO_RESOURCES);
+
+    return(BTM_CMD_STARTED);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetParkMode
+**
+** Description      This function is called to set a connection into park mode.
+**                  A check is made if the connection is already in sniff or park
+**                  mode, and if yes, the park mode is ignored.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetParkMode (BD_ADDR remote_bda, UINT16 beacon_min_period, UINT16 beacon_max_period)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_DEBUG0 ("BTM_SetParkMode");
+    /* First, check if park mode is supported */
+    if (!HCI_PARK_MODE_SUPPORTED(BTM_ReadLocalFeatures()))
+        return(BTM_MODE_UNSUPPORTED);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        /* If the connection is in sniff mode, forget about parking it */
+        if (p->mode != BTM_ACL_MODE_NORMAL)
+            return(BTM_WRONG_MODE);
+
+        /* no park mode if SCO exists -- CR#1982, 1.1 errata 1124
+           command status event should be returned /w error code 0x0C "Command Disallowed"
+           Let LM do this.
+        */
+        if (!btsnd_hcic_park_mode (p->hci_handle,
+                                   beacon_max_period, beacon_min_period))
+            return(BTM_NO_RESOURCES);
+
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_CancelParkMode
+**
+** Description      This function is called to put a connection out of park mode.
+**                  A check is made if the connection is already in park mode,
+**                  and if not, the cancel sniff mode is ignored.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_CancelParkMode (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_DEBUG0 ("BTM_CancelParkMode");
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        /* If the connection is not in park mode, cannot cancel */
+        if (p->mode != BTM_ACL_MODE_PARK)
+            return(BTM_WRONG_MODE);
+
+        if (!btsnd_hcic_exit_park_mode (p->hci_handle))
+            return(BTM_NO_RESOURCES);
+
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+#endif /* BTM_PWR_MGR_INCLUDED == FALSE */
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPacketTypes
+**
+** Description      This function is set the packet types used for a specific
+**                  ACL connection,
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetPacketTypes (BD_ADDR remote_bda, UINT16 pkt_types)
+{
+    tACL_CONN   *p;
+    BTM_TRACE_DEBUG0 ("BTM_SetPacketTypes");
+
+    if ((p = btm_bda_to_acl(remote_bda)) != NULL)
+        return(btm_set_packet_types (p, pkt_types));
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadPacketTypes
+**
+** Description      This function is set the packet types used for a specific
+**                  ACL connection,
+**
+** Returns          packet types supported for the connection, or 0 if no BD address
+**
+*******************************************************************************/
+UINT16 BTM_ReadPacketTypes (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_DEBUG0 ("BTM_ReadPacketTypes");
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        return(p->pkt_types_mask);
+    }
+
+    /* If here, no BD Addr found */
+    return(0);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadAclMode
+**
+** Description      This returns the current mode for a specific
+**                  ACL connection.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**
+** Output Param     p_mode - address where the current mode is copied into.
+**                          BTM_ACL_MODE_NORMAL
+**                          BTM_ACL_MODE_HOLD
+**                          BTM_ACL_MODE_SNIFF
+**                          BTM_ACL_MODE_PARK
+**                          (valid only if return code is BTM_SUCCESS)
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+#if BTM_PWR_MGR_INCLUDED == FALSE
+tBTM_STATUS BTM_ReadAclMode (BD_ADDR remote_bda, UINT8 *p_mode)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadAclMode: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        *p_mode = p->mode;
+        return(BTM_SUCCESS);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+#endif /* BTM_PWR_MGR_INCLUDED == FALSE */
+
+/*******************************************************************************
+**
+** Function         BTM_ReadClockOffset
+**
+** Description      This returns the clock offset for a specific
+**                  ACL connection.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**
+** Returns          clock-offset or 0 if unknown
+**
+*******************************************************************************/
+UINT16 BTM_ReadClockOffset (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadClockOffset: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    if ( (p = btm_bda_to_acl(remote_bda)) != NULL)
+        return(p->clock_offset);
+
+    /* If here, no BD Addr found */
+    return(0);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_IsAclConnectionUp
+**
+** Description      This function is called to check if an ACL connection exists
+**                  to a specific remote BD Address.
+**
+** Returns          TRUE if connection is up, else FALSE.
+**
+*******************************************************************************/
+BOOLEAN BTM_IsAclConnectionUp (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadClockOffset: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        return(TRUE);
+    }
+
+    /* If here, no BD Addr found */
+    return(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetNumAclLinks
+**
+** Description      This function is called to count the number of
+**                  ACL links that are active.
+**
+** Returns          UINT16  Number of active ACL links
+**
+*******************************************************************************/
+UINT16 BTM_GetNumAclLinks (void)
+{
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    return(UINT16)btm_cb.num_acl;
+#else
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+    UINT16      xx, yy;
+    BTM_TRACE_DEBUG0 ("BTM_GetNumAclLinks");
+    for (xx = yy = 0; xx < MAX_L2CAP_LINKS; xx++, p++)
+    {
+        if (p->in_use)
+            yy++;
+    }
+
+    return(yy);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_acl_disc_reason_code
+**
+** Description      This function is called to get the disconnection reason code
+**                  returned by the HCI at disconnection complete event.
+**
+** Returns          TRUE if connection is up, else FALSE.
+**
+*******************************************************************************/
+UINT16 btm_get_acl_disc_reason_code (void)
+{
+    UINT8 res = btm_cb.acl_disc_reason;
+    BTM_TRACE_DEBUG0 ("btm_get_acl_disc_reason_code");
+    return(res);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetHCIConnHandle
+**
+** Description      This function is called to get the handle for an ACL connection
+**                  to a specific remote BD Address.
+**
+** Returns          the handle of the connection, or 0xFFFF if none.
+**
+*******************************************************************************/
+UINT16 BTM_GetHCIConnHandle (BD_ADDR remote_bda)
+{
+    tACL_CONN   *p;
+    BTM_TRACE_DEBUG0 ("BTM_GetHCIConnHandle");
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        return(p->hci_handle);
+    }
+
+    /* If here, no BD Addr found */
+    return(0xFFFF);
+}
+
+#if BTM_PWR_MGR_INCLUDED == FALSE
+/*******************************************************************************
+**
+** Function         btm_process_mode_change
+**
+** Description      This function is called when an HCI mode change event occurs.
+**
+** Input Parms      hci_status - status of the event (HCI_SUCCESS if no errors)
+**                  hci_handle - connection handle associated with the change
+**                  mode - HCI_MODE_ACTIVE, HCI_MODE_HOLD, HCI_MODE_SNIFF, or HCI_MODE_PARK
+**                  interval - number of baseband slots (meaning depends on mode)
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, UINT16 interval)
+{
+    tACL_CONN        *p;
+    UINT8             xx;
+    BTM_TRACE_DEBUG0 ("btm_process_mode_change");
+    if (hci_status != HCI_SUCCESS)
+    {
+        BTM_TRACE_WARNING1 ("BTM: HCI Mode Change Error Status: 0x%02x", hci_status);
+    }
+
+    /* Look up the connection by handle and set the current mode */
+    xx = btm_handle_to_acl_index(hci_handle);
+
+    /* don't assume that we can never get a bad hci_handle */
+    if (xx >= MAX_L2CAP_LINKS)
+        return;
+
+    p = &btm_cb.acl_db[xx];
+
+    /* If status is not success mode does not mean anything */
+    if (hci_status == HCI_SUCCESS)
+        p->mode = mode;
+
+    /* If mode change was because of an active role switch or change link key */
+    btm_cont_rswitch_or_chglinkkey(p, btm_find_dev(p->remote_addr), hci_status);
+}
+#endif /* BTM_PWR_MGR_INCLUDED == FALSE */
+
+/*******************************************************************************
+**
+** Function         btm_process_clk_off_comp_evt
+**
+** Description      This function is called when clock offset command completes.
+**
+** Input Parms      hci_handle - connection handle associated with the change
+**                  clock offset
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset)
+{
+    UINT8      xx;
+    BTM_TRACE_DEBUG0 ("btm_process_clk_off_comp_evt");
+    /* Look up the connection by handle and set the current mode */
+    if ((xx = btm_handle_to_acl_index(hci_handle)) < MAX_L2CAP_LINKS)
+        btm_cb.acl_db[xx].clock_offset = clock_offset;
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_role_changed
+**
+** Description      This function is called whan a link's master/slave role change
+**                  event or command status event (with error) is received.
+**                  It updates the link control block, and calls
+**                  the registered callback with status and role (if registered).
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role)
+{
+    UINT8                   *p_bda = (bd_addr) ? bd_addr : btm_cb.devcb.switch_role_ref_data.remote_bd_addr;
+    tACL_CONN               *p = btm_bda_to_acl(p_bda);
+    tBTM_ROLE_SWITCH_CMPL   *p_data = &btm_cb.devcb.switch_role_ref_data;
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_ROLE_CHG_DATA   evt;
+#endif
+#if BTM_DISC_DURING_RS == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+#endif
+    BTM_TRACE_DEBUG0 ("btm_acl_role_changed");
+    /* Ignore any stray events */
+    if (p == NULL)
+    {
+        /* it could be a failure */
+        if (hci_status != HCI_SUCCESS)
+            btm_acl_report_role_change(hci_status, bd_addr);
+        return;
+    }
+
+    p_data->hci_status = hci_status;
+
+    if (hci_status == HCI_SUCCESS)
+    {
+        p_data->role = new_role;
+        memcpy(p_data->remote_bd_addr, p_bda, BD_ADDR_LEN);
+
+        /* Update cached value */
+        p->link_role = new_role;
+
+        /* Reload LSTO: link supervision timeout is reset in the LM after a role switch */
+        if (new_role == BTM_ROLE_MASTER)
+        {
+            BTM_SetLinkSuperTout (p->remote_addr, p->link_super_tout);
+        }
+    }
+    else
+    {
+        /* so the BTM_BL_ROLE_CHG_EVT uses the old role */
+        new_role = p->link_role;
+    }
+
+    /* Check if any SCO req is pending for role change */
+    btm_sco_chk_pend_rolechange (p->hci_handle);
+
+    /* if switching state is switching we need to turn encryption on */
+    /* if idle, we did not change encryption */
+    if (p->switch_role_state == BTM_ACL_SWKEY_STATE_SWITCHING)
+    {
+        /* Make sure there's not also a change link key going on before re-enabling */
+        if (p->change_key_state != BTM_ACL_SWKEY_STATE_SWITCHING)
+        {
+            if (btsnd_hcic_set_conn_encrypt (p->hci_handle, TRUE))
+            {
+                p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON;
+                p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_ON;
+                return;
+            }
+        }
+        else    /* Set the state and wait for change link key */
+        {
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_ON;
+            return;
+        }
+    }
+
+    /* Set the switch_role_state to IDLE since the reply received from HCI */
+    /* regardless of its result either success or failed. */
+    if (p->switch_role_state == BTM_ACL_SWKEY_STATE_IN_PROGRESS)
+    {
+        p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+        p->encrypt_state = BTM_ACL_ENCRYPT_STATE_IDLE;
+    }
+
+    /* if role switch complete is needed, report it now */
+    btm_acl_report_role_change(hci_status, bd_addr);
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    /* if role change event is registered, report it now */
+    if (btm_cb.p_bl_changed_cb && (btm_cb.bl_evt_mask & BTM_BL_ROLE_CHG_MASK))
+    {
+        evt.event       = BTM_BL_ROLE_CHG_EVT;
+        evt.new_role    = new_role;
+        evt.p_bda       = p_bda;
+        evt.hci_status  = hci_status;
+        (*btm_cb.p_bl_changed_cb)((tBTM_BL_EVENT_DATA *)&evt);
+    }
+
+    BTM_TRACE_DEBUG3("Role Switch Event: new_role 0x%02x, HCI Status 0x%02x, rs_st:%d",
+                     p_data->role, p_data->hci_status, p->switch_role_state);
+#endif
+
+#if BTM_DISC_DURING_RS == TRUE
+    /* If a disconnect is pending, issue it now that role switch has completed */
+    if ((p_dev_rec = btm_find_dev (p_bda)) != NULL)
+    {
+        if (p_dev_rec->rs_disc_pending == BTM_SEC_DISC_PENDING)
+        {
+            BTM_TRACE_WARNING0("btm_acl_role_changed -> Issuing delayed HCI_Disconnect!!!");
+            btsnd_hcic_disconnect(p_dev_rec->hci_handle, HCI_ERR_PEER_USER);
+        }
+        BTM_TRACE_ERROR2("tBTM_SEC_DEV:0x%x rs_disc_pending=%d", (UINT32)p_dev_rec, p_dev_rec->rs_disc_pending);
+        p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING;     /* reset flag */
+    }
+
+#endif
+
+}
+
+#if (RFCOMM_INCLUDED==TRUE)
+/*******************************************************************************
+**
+** Function         BTM_AllocateSCN
+**
+** Description      Look through the Server Channel Numbers for a free one.
+**
+** Returns          Allocated SCN number or 0 if none.
+**
+*******************************************************************************/
+
+UINT8 BTM_AllocateSCN(void)
+{
+    UINT8   x;
+    BTM_TRACE_DEBUG0 ("BTM_AllocateSCN");
+
+    // stack reserves scn 1 for HFP, HSP we still do the correct way
+    for (x = 1; x < BTM_MAX_SCN; x++)
+    {
+        if (!btm_cb.btm_scn[x])
+        {
+            btm_cb.btm_scn[x] = TRUE;
+            return(x+1);
+        }
+    }
+
+    return(0);     /* No free ports */
+}
+
+/*******************************************************************************
+**
+** Function         BTM_TryAllocateSCN
+**
+** Description      Try to allocate a fixed server channel
+**
+** Returns          Returns TRUE if server channel was available
+**
+*******************************************************************************/
+
+BOOLEAN BTM_TryAllocateSCN(UINT8 scn)
+{
+    UINT8   x;
+
+    /* Make sure we don't exceed max port range.
+     * Stack reserves scn 1 for HFP, HSP we still do the correct way.
+     */
+    if ( (scn>=BTM_MAX_SCN) || (scn == 1) )
+        return FALSE;
+
+    /* check if this port is available */
+    if (!btm_cb.btm_scn[scn-1])
+    {
+        btm_cb.btm_scn[scn-1] = TRUE;
+        return TRUE;
+    }
+
+    return (FALSE);     /* Port was busy */
+}
+
+/*******************************************************************************
+**
+** Function         BTM_FreeSCN
+**
+** Description      Free the specified SCN.
+**
+** Returns          TRUE or FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_FreeSCN(UINT8 scn)
+{
+    BTM_TRACE_DEBUG0 ("BTM_FreeSCN ");
+    if (scn <= BTM_MAX_SCN)
+    {
+        btm_cb.btm_scn[scn-1] = FALSE;
+        return(TRUE);
+    }
+    else
+        return(FALSE);      /* Illegal SCN passed in */
+}
+
+#else
+
+/* Make dummy functions for the RPC to link against */
+UINT8 BTM_AllocateSCN(void)
+{
+    return(0);
+}
+
+BOOLEAN BTM_FreeSCN(UINT8 scn)
+{
+    return(FALSE);
+}
+
+#endif
+
+
+/*******************************************************************************
+**
+** Function         btm_acl_timeout
+**
+** Description      This function is called when a timer list entry expires.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_acl_timeout (TIMER_LIST_ENT  *p_tle)
+{
+    UINT32 timer_type = p_tle->param;
+
+    BTM_TRACE_DEBUG0 ("btm_acl_timeout");
+    if (timer_type == TT_DEV_RLNKP)
+    {
+        tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_rlinkp_cmpl_cb;
+        tBTM_LNK_POLICY_RESULTS  lnkpol;
+
+        lnkpol.status = BTM_ERR_PROCESSING;
+        lnkpol.settings = 0;
+
+        btm_cb.devcb.p_rlinkp_cmpl_cb = NULL;
+
+        if (p_cb)
+            (*p_cb)(&lnkpol);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_set_packet_types
+**
+** Description      This function sets the packet types used for a specific
+**                  ACL connection. It is called internally by btm_acl_created
+**                  or by an application/profile by BTM_SetPacketTypes.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types)
+{
+    UINT16 temp_pkt_types;
+    BTM_TRACE_DEBUG0 ("btm_set_packet_types");
+    /* Save in the ACL control blocks, types that we support */
+    temp_pkt_types = (pkt_types & BTM_ACL_SUPPORTED_PKTS_MASK &
+                      btm_cb.btm_acl_pkt_types_supported);
+
+    /* OR in any exception packet types if at least 2.0 version of spec */
+    if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+    {
+        temp_pkt_types |= ((pkt_types & BTM_ACL_EXCEPTION_PKTS_MASK) |
+                           (btm_cb.btm_acl_pkt_types_supported & BTM_ACL_EXCEPTION_PKTS_MASK));
+    }
+    else
+    {
+        temp_pkt_types &= (~BTM_ACL_EXCEPTION_PKTS_MASK);
+    }
+
+    /* Exclude packet types not supported by the peer */
+    btm_acl_chk_peer_pkt_type_support (p, &temp_pkt_types);
+
+    BTM_TRACE_DEBUG1 ("SetPacketType Mask -> 0x%04x", temp_pkt_types);
+
+    if (!btsnd_hcic_change_conn_type (p->hci_handle, temp_pkt_types))
+    {
+        return(BTM_NO_RESOURCES);
+    }
+
+    p->pkt_types_mask = temp_pkt_types;
+
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_max_packet_size
+**
+** Returns          Returns maximum packet size that can be used for current
+**                  connection, 0 if connection is not established
+**
+*******************************************************************************/
+UINT16 btm_get_max_packet_size (BD_ADDR addr)
+{
+    tACL_CONN   *p = btm_bda_to_acl(addr);
+    UINT16      pkt_types = 0;
+    UINT16      pkt_size = 0;
+    BTM_TRACE_DEBUG0 ("btm_get_max_packet_size");
+    if (p != NULL)
+    {
+        pkt_types = p->pkt_types_mask;
+    }
+    else
+    {
+        /* Special case for when info for the local device is requested */
+        if (memcmp (btm_cb.devcb.local_addr, addr, BD_ADDR_LEN) == 0)
+        {
+            pkt_types = btm_cb.btm_acl_pkt_types_supported;
+        }
+    }
+
+    if (pkt_types)
+    {
+        if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH5))
+            pkt_size = HCI_EDR3_DH5_PACKET_SIZE;
+        else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH5))
+            pkt_size = HCI_EDR2_DH5_PACKET_SIZE;
+        else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH3))
+            pkt_size = HCI_EDR3_DH3_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH5)
+            pkt_size = HCI_DH5_PACKET_SIZE;
+        else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH3))
+            pkt_size = HCI_EDR2_DH3_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM5)
+            pkt_size = HCI_DM5_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH3)
+            pkt_size = HCI_DH3_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM3)
+            pkt_size = HCI_DM3_PACKET_SIZE;
+        else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_3_DH1))
+            pkt_size = HCI_EDR3_DH1_PACKET_SIZE;
+        else if (!(pkt_types & BTM_ACL_PKT_TYPES_MASK_NO_2_DH1))
+            pkt_size = HCI_EDR2_DH1_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DH1)
+            pkt_size = HCI_DH1_PACKET_SIZE;
+        else if (pkt_types & BTM_ACL_PKT_TYPES_MASK_DM1)
+            pkt_size = HCI_DM1_PACKET_SIZE;
+    }
+
+#ifdef BRCM_VS
+    /* Using HCI size 1017 instead of 1021 */
+    if ((pkt_size == HCI_EDR3_DH5_PACKET_SIZE)
+        && (btu_cb.hcit_acl_data_size == 1017))
+        pkt_size = 1017;
+#endif
+
+    return(pkt_size);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteVersion
+**
+** Returns          If connected report peer device info
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr, UINT8 *lmp_version,
+                                   UINT16 *manufacturer, UINT16 *lmp_sub_version)
+{
+    tACL_CONN        *p = btm_bda_to_acl(addr);
+    BTM_TRACE_DEBUG0 ("BTM_ReadRemoteVersion");
+    if (p == NULL)
+        return(BTM_UNKNOWN_ADDR);
+
+    if (lmp_version)
+        *lmp_version = p->lmp_version;
+
+    if (manufacturer)
+        *manufacturer = p->manufacturer;
+
+    if (lmp_sub_version)
+        *lmp_sub_version = p->lmp_subversion;
+
+    return(BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteFeatures
+**
+** Returns          pointer to the features string
+**
+*******************************************************************************/
+UINT8 *BTM_ReadRemoteFeatures (BD_ADDR addr)
+{
+    tACL_CONN        *p = btm_bda_to_acl(addr);
+    BTM_TRACE_DEBUG0 ("BTM_ReadRemoteFeatures");
+    if (p == NULL)
+    {
+        return(NULL);
+    }
+
+    return(p->features);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RegBusyLevelNotif
+**
+** Description      This function is called to register a callback to receive
+**                  busy level change events.
+**
+** Returns          BTM_SUCCESS if successfully registered, otherwise error
+**
+*******************************************************************************/
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, UINT8 *p_level,
+                                   tBTM_BL_EVENT_MASK evt_mask)
+{
+    BTM_TRACE_DEBUG0 ("BTM_RegBusyLevelNotif");
+    if (p_level)
+        *p_level = btm_cb.busy_level;
+
+    btm_cb.bl_evt_mask = evt_mask;
+
+    if (!p_cb)
+        btm_cb.p_bl_changed_cb = NULL;
+    else if (btm_cb.p_bl_changed_cb)
+        return(BTM_BUSY);
+    else
+        btm_cb.p_bl_changed_cb = p_cb;
+
+    return(BTM_SUCCESS);
+}
+#else
+/*******************************************************************************
+**
+** Function         BTM_AclRegisterForChanges
+**
+** Returns          This function is called to register a callback for when the
+**                  ACL database changes, i.e. new entry or entry deleted.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_AclRegisterForChanges (tBTM_ACL_DB_CHANGE_CB *p_cb)
+{
+    BTM_TRACE_DEBUG0 ("BTM_AclRegisterForChanges");
+    if (!p_cb)
+        btm_cb.p_acl_changed_cb = NULL;
+    else if (btm_cb.p_acl_changed_cb)
+        return(BTM_BUSY);
+    else
+        btm_cb.p_acl_changed_cb = p_cb;
+
+    return(BTM_SUCCESS);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_SetQoS
+**
+** Description      This function is called to setup QoS
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetQoS (BD_ADDR bd, FLOW_SPEC *p_flow, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+
+    BTM_TRACE_API6 ("BTM_SetQoS: BdAddr: %02x%02x%02x%02x%02x%02x",
+                    bd[0], bd[1], bd[2],
+                    bd[3], bd[4], bd[5]);
+
+    /* If someone already waiting on the version, do not allow another */
+    if (btm_cb.devcb.p_qossu_cmpl_cb)
+        return(BTM_BUSY);
+
+    if ( (p = btm_bda_to_acl(bd)) != NULL)
+    {
+        btu_start_timer (&btm_cb.devcb.qossu_timer, BTU_TTYPE_BTM_ACL, BTM_DEV_REPLY_TIMEOUT);
+        btm_cb.devcb.p_qossu_cmpl_cb = p_cb;
+
+        if (!btsnd_hcic_qos_setup (p->hci_handle, p_flow->qos_flags, p_flow->service_type,
+                                   p_flow->token_rate, p_flow->peak_bandwidth, p_flow->latency,p_flow->delay_variation))
+        {
+            btm_cb.devcb.p_qossu_cmpl_cb = NULL;
+            btu_stop_timer(&btm_cb.devcb.qossu_timer);
+            return(BTM_NO_RESOURCES);
+        }
+        else
+            return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         btm_qos_setup_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the qos setup request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow)
+{
+    tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_qossu_cmpl_cb;
+    tBTM_QOS_SETUP_CMPL     qossu;
+    BTM_TRACE_DEBUG0 ("btm_qos_setup_complete");
+    btu_stop_timer (&btm_cb.devcb.qossu_timer);
+
+    btm_cb.devcb.p_qossu_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        memset(&qossu, 0, sizeof(tBTM_QOS_SETUP_CMPL));
+        qossu.status = status;
+        qossu.handle = handle;
+        if (p_flow != NULL)
+        {
+            qossu.flow.qos_flags = p_flow->qos_flags;
+            qossu.flow.service_type = p_flow->service_type;
+            qossu.flow.token_rate = p_flow->token_rate;
+            qossu.flow.peak_bandwidth = p_flow->peak_bandwidth;
+            qossu.flow.latency = p_flow->latency;
+            qossu.flow.delay_variation = p_flow->delay_variation;
+        }
+        BTM_TRACE_DEBUG1 ("BTM: p_flow->delay_variation: 0x%02x",
+                          qossu.flow.delay_variation);
+        (*p_cb)(&qossu);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRSSI
+**
+** Description      This function is called to read the link policy settings.
+**                  The address of link policy results are returned in the callback.
+**                  (tBTM_RSSI_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully initiated or error code
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadRSSI (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadRSSI: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    /* If someone already waiting on the version, do not allow another */
+    if (btm_cb.devcb.p_rssi_cmpl_cb)
+        return(BTM_BUSY);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        btu_start_timer (&btm_cb.devcb.rssi_timer, BTU_TTYPE_BTM_ACL,
+                         BTM_DEV_REPLY_TIMEOUT);
+
+        btm_cb.devcb.p_rssi_cmpl_cb = p_cb;
+
+        if (!btsnd_hcic_read_rssi (p->hci_handle))
+        {
+            btm_cb.devcb.p_rssi_cmpl_cb = NULL;
+            btu_stop_timer (&btm_cb.devcb.rssi_timer);
+            return(BTM_NO_RESOURCES);
+        }
+        else
+            return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLinkQuality
+**
+** Description      This function is called to read the link qulaity.
+**                  The value of the link quality is returned in the callback.
+**                  (tBTM_LINK_QUALITY_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully initiated or error code
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLinkQuality (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+
+    BTM_TRACE_API6 ("BTM_ReadLinkQuality: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    /* If someone already waiting on the version, do not allow another */
+    if (btm_cb.devcb.p_lnk_qual_cmpl_cb)
+        return(BTM_BUSY);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        btu_start_timer (&btm_cb.devcb.lnk_quality_timer, BTU_TTYPE_BTM_ACL,
+                         BTM_DEV_REPLY_TIMEOUT);
+        btm_cb.devcb.p_lnk_qual_cmpl_cb = p_cb;
+
+        if (!btsnd_hcic_get_link_quality (p->hci_handle))
+        {
+            btu_stop_timer (&btm_cb.devcb.lnk_quality_timer);
+            btm_cb.devcb.p_lnk_qual_cmpl_cb = NULL;
+            return(BTM_NO_RESOURCES);
+        }
+        else
+            return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return(BTM_UNKNOWN_ADDR);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadTxPower
+**
+** Description      This function is called to read the current
+**                  TX power of the connection. The tx power level results
+**                  are returned in the callback.
+**                  (tBTM_RSSI_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully initiated or error code
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadTxPower (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb)
+{
+    tACL_CONN   *p;
+    BOOLEAN     ret;
+#define BTM_READ_RSSI_TYPE_CUR  0x00
+#define BTM_READ_RSSI_TYPE_MAX  0X01
+
+    BTM_TRACE_API6 ("BTM_ReadTxPower: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                    remote_bda[0], remote_bda[1], remote_bda[2],
+                    remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    /* If someone already waiting on the version, do not allow another */
+    if (btm_cb.devcb.p_tx_power_cmpl_cb)
+        return(BTM_BUSY);
+
+    p = btm_bda_to_acl(remote_bda);
+    if (p != (tACL_CONN *)NULL)
+    {
+        btu_start_timer (&btm_cb.devcb.tx_power_timer, BTU_TTYPE_BTM_ACL,
+                         BTM_DEV_REPLY_TIMEOUT);
+
+        btm_cb.devcb.p_tx_power_cmpl_cb = p_cb;
+
+#if BLE_INCLUDED == TRUE
+        if (p->is_le_link)
+        {
+            memcpy(btm_cb.devcb.read_tx_pwr_addr, remote_bda, BD_ADDR_LEN);
+            ret = btsnd_hcic_ble_read_adv_chnl_tx_power();
+        }
+        else
+#endif
+        {
+            ret = btsnd_hcic_read_tx_power (p->hci_handle, BTM_READ_RSSI_TYPE_CUR);
+        }
+        if (!ret)
+        {
+            btm_cb.devcb.p_tx_power_cmpl_cb = NULL;
+            btu_stop_timer (&btm_cb.devcb.tx_power_timer);
+            return(BTM_NO_RESOURCES);
+        }
+        else
+            return(BTM_CMD_STARTED);
+    }
+
+    /* If here, no BD Addr found */
+    return (BTM_UNKNOWN_ADDR);
+}
+/*******************************************************************************
+**
+** Function         btm_read_tx_power_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read tx power request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble)
+{
+    tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_tx_power_cmpl_cb;
+    tBTM_TX_POWER_RESULTS   results;
+    UINT16                   handle;
+    tACL_CONN               *p_acl_cb = &btm_cb.acl_db[0];
+    UINT16                   index;
+    BTM_TRACE_DEBUG0 ("btm_read_tx_power_complete");
+    btu_stop_timer (&btm_cb.devcb.tx_power_timer);
+
+    /* If there was a callback registered for read rssi, call it */
+    btm_cb.devcb.p_tx_power_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (results.hci_status, p);
+
+        if (results.hci_status == HCI_SUCCESS)
+        {
+            results.status = BTM_SUCCESS;
+
+            if (!is_ble)
+            {
+                STREAM_TO_UINT16 (handle, p);
+                STREAM_TO_UINT8 (results.tx_power, p);
+
+                /* Search through the list of active channels for the correct BD Addr */
+                for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++)
+                {
+                    if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle))
+                    {
+                        memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN);
+                        break;
+                    }
+                }
+            }
+#if BLE_INCLUDED == TRUE
+            else
+            {
+                STREAM_TO_UINT8 (results.tx_power, p);
+                memcpy(results.rem_bda, btm_cb.devcb.read_tx_pwr_addr, BD_ADDR_LEN);
+            }
+#endif
+            BTM_TRACE_DEBUG2 ("BTM TX power Complete: tx_power %d, hci status 0x%02x",
+                                  results.tx_power, results.hci_status);
+        }
+        else
+            results.status = BTM_ERR_PROCESSING;
+
+        (*p_cb)(&results);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_rssi_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read rssi request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_rssi_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_rssi_cmpl_cb;
+    tBTM_RSSI_RESULTS        results;
+    UINT16                   handle;
+    tACL_CONN               *p_acl_cb = &btm_cb.acl_db[0];
+    UINT16                   index;
+    BTM_TRACE_DEBUG0 ("btm_read_rssi_complete");
+    btu_stop_timer (&btm_cb.devcb.rssi_timer);
+
+    /* If there was a callback registered for read rssi, call it */
+    btm_cb.devcb.p_rssi_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (results.hci_status, p);
+
+        if (results.hci_status == HCI_SUCCESS)
+        {
+            results.status = BTM_SUCCESS;
+
+            STREAM_TO_UINT16 (handle, p);
+
+            STREAM_TO_UINT8 (results.rssi, p);
+            BTM_TRACE_DEBUG2 ("BTM RSSI Complete: rssi %d, hci status 0x%02x",
+                              results.rssi, results.hci_status);
+
+            /* Search through the list of active channels for the correct BD Addr */
+            for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++)
+            {
+                if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle))
+                {
+                    memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN);
+                    break;
+                }
+            }
+        }
+        else
+            results.status = BTM_ERR_PROCESSING;
+
+        (*p_cb)(&results);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_link_quality_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read link quality.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_link_quality_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB            *p_cb = btm_cb.devcb.p_lnk_qual_cmpl_cb;
+    tBTM_LINK_QUALITY_RESULTS results;
+    UINT16                   handle;
+    tACL_CONN               *p_acl_cb = &btm_cb.acl_db[0];
+    UINT16                   index;
+    BTM_TRACE_DEBUG0 ("btm_read_link_quality_complete");
+    btu_stop_timer (&btm_cb.devcb.rssi_timer);
+
+    /* If there was a callback registered for read rssi, call it */
+    btm_cb.devcb.p_lnk_qual_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (results.hci_status, p);
+
+        if (results.hci_status == HCI_SUCCESS)
+        {
+            results.status = BTM_SUCCESS;
+
+            STREAM_TO_UINT16 (handle, p);
+
+            STREAM_TO_UINT8 (results.link_quality, p);
+            BTM_TRACE_DEBUG2 ("BTM Link Quality Complete: Link Quality %d, hci status 0x%02x",
+                              results.link_quality, results.hci_status);
+
+            /* Search through the list of active channels for the correct BD Addr */
+            for (index = 0; index < MAX_L2CAP_LINKS; index++, p_acl_cb++)
+            {
+                if ((p_acl_cb->in_use) && (handle == p_acl_cb->hci_handle))
+                {
+                    memcpy (results.rem_bda, p_acl_cb->remote_addr, BD_ADDR_LEN);
+                    break;
+                }
+            }
+        }
+        else
+            results.status = BTM_ERR_PROCESSING;
+
+        (*p_cb)(&results);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_remove_acl
+**
+** Description      This function is called to disconnect an ACL connection
+**
+** Returns          BTM_SUCCESS if successfully initiated, otherwise BTM_NO_RESOURCES.
+**
+*******************************************************************************/
+tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr)
+{
+    UINT16  hci_handle = BTM_GetHCIConnHandle(bd_addr);
+    tBTM_STATUS status = BTM_SUCCESS;
+
+    BTM_TRACE_DEBUG0 ("btm_remove_acl");
+#if BTM_DISC_DURING_RS == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
+
+    /* Role Switch is pending, postpone until completed */
+    if (p_dev_rec && (p_dev_rec->rs_disc_pending == BTM_SEC_RS_PENDING))
+    {
+        p_dev_rec->rs_disc_pending = BTM_SEC_DISC_PENDING;
+    }
+    else    /* otherwise can disconnect right away */
+#endif
+
+    if (hci_handle != 0xFFFF)
+    {
+        if (!btsnd_hcic_disconnect (hci_handle, HCI_ERR_PEER_USER))
+            status = BTM_NO_RESOURCES;
+    }
+    else
+        status = BTM_UNKNOWN_ADDR;
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetTraceLevel
+**
+** Description      This function sets the trace level for BTM.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+UINT8 BTM_SetTraceLevel (UINT8 new_level)
+{
+    BTM_TRACE_DEBUG0 ("BTM_SetTraceLevel");
+    if (new_level != 0xFF)
+        btm_cb.trace_level = new_level;
+
+    return(btm_cb.trace_level);
+}
+
+/*******************************************************************************
+**
+** Function         btm_cont_rswitch_or_chglinkkey
+**
+** Description      This function is called to continue processing an active
+**                  role switch or change of link key procedure.  It first
+**                  disables encryption if enabled and EPR is not supported
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_cont_rswitch_or_chglinkkey (tACL_CONN *p, tBTM_SEC_DEV_REC *p_dev_rec,
+                                     UINT8 hci_status)
+{
+    BOOLEAN sw_ok = TRUE;
+    BOOLEAN chlk_ok = TRUE;
+    BTM_TRACE_DEBUG0 ("btm_cont_rswitch_or_chglinkkey ");
+    /* Check to see if encryption needs to be turned off if pending
+       change of link key or role switch */
+    if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE ||
+        p->change_key_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+    {
+        /* Must turn off Encryption first if necessary */
+        /* Some devices do not support switch or change of link key while encryption is on */
+        if (p_dev_rec != NULL && ((p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED) != 0)
+            && !BTM_EPR_AVAILABLE(p))
+        {
+            if (btsnd_hcic_set_conn_encrypt (p->hci_handle, FALSE))
+            {
+                p->encrypt_state = BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF;
+                if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+                    p->switch_role_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF;
+
+                if (p->change_key_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+                    p->change_key_state = BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF;
+            }
+            else
+            {
+                /* Error occurred; set states back to Idle */
+                if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+                    sw_ok = FALSE;
+
+                if (p->change_key_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+                    chlk_ok = FALSE;
+            }
+        }
+        else    /* Encryption not used or EPR supported, continue with switch
+                   and/or change of link key */
+        {
+            if (p->switch_role_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+            {
+                p->switch_role_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS;
+#if BTM_DISC_DURING_RS == TRUE
+                if (p_dev_rec)
+                    p_dev_rec->rs_disc_pending = BTM_SEC_RS_PENDING;
+#endif
+                sw_ok = btsnd_hcic_switch_role (p->remote_addr, (UINT8)!p->link_role);
+            }
+
+            if (p->change_key_state == BTM_ACL_SWKEY_STATE_MODE_CHANGE)
+            {
+                p->switch_role_state = BTM_ACL_SWKEY_STATE_IN_PROGRESS;
+                chlk_ok = btsnd_hcic_change_link_key (p->hci_handle);
+            }
+        }
+
+        if (!sw_ok)
+        {
+            p->switch_role_state = BTM_ACL_SWKEY_STATE_IDLE;
+            btm_acl_report_role_change(hci_status, p->remote_addr);
+        }
+
+        if (!chlk_ok)
+        {
+            p->change_key_state = BTM_ACL_SWKEY_STATE_IDLE;
+            if (btm_cb.devcb.p_chg_link_key_cb)
+            {
+                btm_cb.devcb.chg_link_key_ref_data.hci_status = hci_status;
+                (*btm_cb.devcb.p_chg_link_key_cb)(&btm_cb.devcb.chg_link_key_ref_data);
+                btm_cb.devcb.p_chg_link_key_cb = NULL;
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_resubmit_page
+**
+** Description      send pending page request
+**
+*******************************************************************************/
+void btm_acl_resubmit_page (void)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BT_HDR  *p_buf;
+    UINT8   *pp;
+    BD_ADDR bda;
+    BTM_TRACE_DEBUG0 ("btm_acl_resubmit_page");
+    /* If there were other page request schedule can start the next one */
+    if ((p_buf = (BT_HDR *)GKI_dequeue (&btm_cb.page_queue)) != NULL)
+    {
+        /* skip 3 (2 bytes opcode and 1 byte len) to get to the bd_addr
+         * for both create_conn and rmt_name */
+        pp = (UINT8 *)(p_buf + 1) + p_buf->offset + 3;
+
+        STREAM_TO_BDADDR (bda, pp);
+
+        p_dev_rec = btm_find_or_alloc_dev (bda);
+
+        memcpy (btm_cb.connecting_bda, p_dev_rec->bd_addr,   BD_ADDR_LEN);
+        memcpy (btm_cb.connecting_dc,  p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+        btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p_buf);
+    }
+    else
+        btm_cb.paging = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_reset_paging
+**
+** Description      set paging to FALSE and free the page queue - called at hci_reset
+**
+*******************************************************************************/
+void  btm_acl_reset_paging (void)
+{
+    BT_HDR *p;
+    BTM_TRACE_DEBUG0 ("btm_acl_reset_paging");
+    /* If we sent reset we are definitely not paging any more */
+    while ((p = (BT_HDR *)GKI_dequeue(&btm_cb.page_queue)) != NULL)
+        GKI_freebuf (p);
+
+    btm_cb.paging = FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_set_discing
+**
+** Description      set discing to the given value
+**
+*******************************************************************************/
+void  btm_acl_set_discing (BOOLEAN discing)
+{
+    BTM_TRACE_DEBUG0 ("btm_acl_set_discing");
+    btm_cb.discing = discing;
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_paging
+**
+** Description      send a paging command or queue it in btm_cb
+**
+*******************************************************************************/
+void  btm_acl_paging (BT_HDR *p, BD_ADDR bda)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_DEBUG4 ("btm_acl_paging discing:%d, paging:%d BDA: %06x%06x",
+                      btm_cb.discing, btm_cb.paging,
+                      (bda[0]<<16) + (bda[1]<<8) + bda[2], (bda[3]<<16) + (bda[4] << 8) + bda[5]);
+    if (btm_cb.discing)
+    {
+        btm_cb.paging = TRUE;
+        GKI_enqueue (&btm_cb.page_queue, p);
+    }
+    else
+    {
+        if (!BTM_ACL_IS_CONNECTED (bda))
+        {
+            BTM_TRACE_DEBUG2 ("connecting_bda: %06x%06x",
+                              (btm_cb.connecting_bda[0]<<16) + (btm_cb.connecting_bda[1]<<8) + btm_cb.connecting_bda[2],
+                              (btm_cb.connecting_bda[3]<<16) + (btm_cb.connecting_bda[4] << 8) + btm_cb.connecting_bda[5]);
+            if (btm_cb.paging &&
+                memcmp (bda, btm_cb.connecting_bda, BD_ADDR_LEN) != 0)
+            {
+                GKI_enqueue (&btm_cb.page_queue, p);
+            }
+            else
+            {
+                p_dev_rec = btm_find_or_alloc_dev (bda);
+                memcpy (btm_cb.connecting_bda, p_dev_rec->bd_addr,   BD_ADDR_LEN);
+                memcpy (btm_cb.connecting_dc,  p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+                btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+            }
+
+            btm_cb.paging = TRUE;
+        }
+        else /* ACL is already up */
+        {
+            btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_acl_notif_conn_collision
+**
+** Description      Send connection collision event to upper layer if registered
+**
+** Returns          TRUE if sent out to upper layer,
+**                  FALSE if BTM_BUSY_LEVEL_CHANGE_INCLUDED == FALSE, or no one
+**                  needs the notification.
+**
+**          Note: Function only used if BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE
+**
+*******************************************************************************/
+BOOLEAN  btm_acl_notif_conn_collision (BD_ADDR bda)
+{
+#if (BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_EVENT_DATA  evt_data;
+
+    /* Report possible collision to the upper layer. */
+    if (btm_cb.p_bl_changed_cb)
+    {
+        BTM_TRACE_DEBUG6 ("btm_acl_notif_conn_collision: RemBdAddr: %02x%02x%02x%02x%02x%02x",
+                          bda[0], bda[1], bda[2], bda[3], bda[4], bda[5]);
+
+        evt_data.event = BTM_BL_COLLISION_EVT;
+        evt_data.conn.p_bda = bda;
+        (*btm_cb.p_bl_changed_cb)(&evt_data);
+        return TRUE;
+    }
+    else
+        return FALSE;
+#else
+    return FALSE;
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_acl_chk_peer_pkt_type_support
+**
+** Description      Check if peer supports requested packets
+**
+*******************************************************************************/
+void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type)
+{
+    /* 3 and 5 slot packets? */
+    if (!HCI_3_SLOT_PACKETS_SUPPORTED(p->features))
+        *p_pkt_type &= ~(BTM_ACL_PKT_TYPES_MASK_DH3 +BTM_ACL_PKT_TYPES_MASK_DM3);
+
+    if (!HCI_5_SLOT_PACKETS_SUPPORTED(p->features))
+        *p_pkt_type &= ~(BTM_ACL_PKT_TYPES_MASK_DH5 + BTM_ACL_PKT_TYPES_MASK_DM5);
+
+    /* If HCI version > 2.0, then also check EDR packet types */
+    if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+    {
+        /* 2 and 3 MPS support? */
+        if (!HCI_EDR_ACL_2MPS_SUPPORTED(p->features))
+            /* Not supported. Add 'not_supported' mask for all 2MPS packet types */
+            *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 + BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 + BTM_ACL_PKT_TYPES_MASK_NO_2_DH5);
+
+        if (!HCI_EDR_ACL_3MPS_SUPPORTED(p->features))
+            /* Not supported. Add 'not_supported' mask for all 3MPS packet types */
+            *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
+
+        /* EDR 3 and 5 slot support? */
+        if (HCI_EDR_ACL_2MPS_SUPPORTED(p->features) || HCI_EDR_ACL_3MPS_SUPPORTED(p->features))
+        {
+            if (!HCI_3_SLOT_EDR_ACL_SUPPORTED(p->features))
+                /* Not supported. Add 'not_supported' mask for all 3-slot EDR packet types */
+                *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH3);
+
+            if (!HCI_5_SLOT_EDR_ACL_SUPPORTED(p->features))
+                /* Not supported. Add 'not_supported' mask for all 5-slot EDR packet types */
+                *p_pkt_type |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 + BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
+        }
+    }
+}
diff --git a/stack/btm/btm_ble.c b/stack/btm/btm_ble.c
new file mode 100644
index 0000000..74b5767
--- /dev/null
+++ b/stack/btm/btm_ble.c
@@ -0,0 +1,1900 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for BLE device control utilities, and LE
+ *  security functions.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "btm_ble_api.h"
+#include "smp_api.h"
+
+#if SMP_INCLUDED == TRUE
+extern BOOLEAN AES_CMAC ( BT_OCTET16 key, UINT8 *input, UINT16 length, UINT16 tlen, UINT8 *p_signature);
+extern void smp_link_encrypted(BD_ADDR bda, UINT8 encr_enable);
+extern BOOLEAN smp_proc_ltk_request(BD_ADDR bda);
+#endif
+
+static void btm_ble_update_active_bgconn_scan_params(void);
+
+/*******************************************************************************/
+/* External Function to be called by other modules                             */
+/*******************************************************************************/
+/********************************************************
+**
+** Function         BTM_SecAddBleDevice
+**
+** Description      Add/modify device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  for a LE device stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  bd_name          - Name of the peer device.  NULL if unknown.
+**                  dev_type         - Remote device's device type.
+**                  addr_type        - LE device address type.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name, tBT_DEVICE_TYPE dev_type,
+                             tBLE_ADDR_TYPE addr_type)
+{
+#if BLE_INCLUDED == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    UINT8               i = 0;
+    tBTM_INQ_INFO      *p_info=NULL;
+
+    BTM_TRACE_DEBUG1 ("BTM_SecAddBleDevice dev_type=0x%x", dev_type);
+    p_dev_rec = btm_find_dev (bd_addr);
+
+    if (!p_dev_rec)
+    {
+        BTM_TRACE_DEBUG0("Add a new device");
+
+        /* There is no device record, allocate one.
+         * If we can not find an empty spot for this one, let it fail. */
+        for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++)
+        {
+            if (!(btm_cb.sec_dev_rec[i].sec_flags & BTM_SEC_IN_USE))
+            {
+                BTM_TRACE_DEBUG1 ("allocate a new dev rec idx=0x%x ", i );
+                p_dev_rec = &btm_cb.sec_dev_rec[i];
+
+                /* Mark this record as in use and initialize */
+                memset (p_dev_rec, 0, sizeof (tBTM_SEC_DEV_REC));
+                p_dev_rec->sec_flags = BTM_SEC_IN_USE;
+                memcpy (p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN);
+                p_dev_rec->hci_handle = BTM_GetHCIConnHandle (bd_addr);
+
+                /* update conn params, use default value for background connection params */
+                p_dev_rec->conn_params.min_conn_int     =
+                p_dev_rec->conn_params.max_conn_int     =
+                p_dev_rec->conn_params.supervision_tout =
+                p_dev_rec->conn_params.slave_latency    = BTM_BLE_CONN_PARAM_UNDEF;
+
+                BTM_TRACE_DEBUG1 ("hci_handl=0x%x ",  p_dev_rec->hci_handle );
+                break;
+            }
+        }
+
+        if (!p_dev_rec)
+            return(FALSE);
+    }
+    else
+    {
+        BTM_TRACE_DEBUG0("Device already exist");
+    }
+
+    memset(p_dev_rec->sec_bd_name, 0, sizeof(tBTM_BD_NAME));
+
+    if (bd_name && bd_name[0])
+    {
+        p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
+        BCM_STRNCPY_S ((char *)p_dev_rec->sec_bd_name, sizeof (p_dev_rec->sec_bd_name),
+            (char *)bd_name, BTM_MAX_REM_BD_NAME_LEN);
+    }
+    p_dev_rec->device_type = dev_type;
+    p_dev_rec->ble.ble_addr_type = addr_type;
+    BTM_TRACE_DEBUG3 ("p_dev_rec->device_type =0x%x  addr_type=0x%x sec_flags=0x%x",
+                      dev_type,  addr_type, p_dev_rec->sec_flags);
+
+    /* sync up with the Inq Data base*/
+    p_info = BTM_InqDbRead(bd_addr);
+    if (p_info)
+    {
+        p_info->results.ble_addr_type = p_dev_rec->ble.ble_addr_type ;
+        p_info->results.device_type = p_dev_rec->device_type;
+        BTM_TRACE_DEBUG2 ("InqDb  device_type =0x%x  addr_type=0x%x",
+                          p_info->results.device_type, p_info->results.ble_addr_type);
+    }
+
+#endif
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddBleKey
+**
+** Description      Add/modify LE device information.  This function will be
+**                  normally called during host startup to restore all required
+**                  information stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  p_le_key         - LE key values.
+**                  key_type         - LE SMP key type.
+*
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key, tBTM_LE_KEY_TYPE key_type)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    BTM_TRACE_DEBUG0 ("BTM_SecAddBleKey");
+    p_dev_rec = btm_find_dev (bd_addr);
+    if (!p_dev_rec || !p_le_key ||
+        (key_type != BTM_LE_KEY_PENC && key_type != BTM_LE_KEY_PID &&
+         key_type != BTM_LE_KEY_PCSRK && key_type != BTM_LE_KEY_LENC))
+    {
+        BTM_TRACE_WARNING3 ("BTM_SecAddLeKey()  No BT Link Key, Wrong Type, or No Device record \
+                        for bdaddr: %08x%04x, Type: %d",
+                            (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                            (bd_addr[4]<<8)+bd_addr[5], key_type);
+        return(FALSE);
+    }
+
+    BTM_TRACE_DEBUG3 ("BTM_SecAddLeKey()  BDA: %08x%04x, Type: 0x%02x",
+                      (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                      (bd_addr[4]<<8)+bd_addr[5], key_type);
+
+    if (key_type == BTM_LE_KEY_PENC || key_type == BTM_LE_KEY_PID ||
+        key_type == BTM_LE_KEY_PCSRK || key_type == BTM_LE_KEY_LENC ||
+        key_type == BTM_LE_KEY_LCSRK)
+    {
+        btm_sec_save_le_key (bd_addr, key_type, p_le_key, FALSE);
+    }
+
+#endif
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleLoadLocalKeys
+**
+** Description      Local local identity key, encryption root or sign counter.
+**
+** Parameters:      key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
+**                            or BTM_BLE_KEY_TYPE_COUNTER.
+**                  p_key: pointer to the key.
+*
+** Returns          non2.
+**
+*******************************************************************************/
+void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key)
+{
+#if BLE_INCLUDED == TRUE
+    tBTM_DEVCB *p_devcb = &btm_cb.devcb;
+    BTM_TRACE_DEBUG0 ("BTM_BleLoadLocalKeys");
+    if (p_key != NULL)
+    {
+        switch (key_type)
+        {
+            case BTM_BLE_KEY_TYPE_ID:
+                memcpy(&p_devcb->id_keys, &p_key->id_keys, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
+                break;
+
+            case BTM_BLE_KEY_TYPE_ER:
+                memcpy(p_devcb->er, p_key->er, sizeof(BT_OCTET16));
+                break;
+
+            default:
+                BTM_TRACE_ERROR1("unknow local key type: %d", key_type);
+                break;
+        }
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceEncRoot
+**
+** Description      This function is called to read the local device encryption
+**                  root.
+**
+** Returns          void
+**                  the local device ER is copied into er
+**
+*******************************************************************************/
+void BTM_GetDeviceEncRoot (BT_OCTET16 er)
+{
+    BTM_TRACE_DEBUG0 ("BTM_GetDeviceEncRoot");
+
+#if BLE_INCLUDED == TRUE
+    memcpy (er, btm_cb.devcb.er, BT_OCTET16_LEN);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceIDRoot
+**
+** Description      This function is called to read the local device identity
+**                  root.
+**
+** Returns          void
+**                  the local device IR is copied into irk
+**
+*******************************************************************************/
+void BTM_GetDeviceIDRoot (BT_OCTET16 irk)
+{
+    BTM_TRACE_DEBUG0 ("BTM_GetDeviceIDRoot ");
+
+#if BLE_INCLUDED == TRUE
+    memcpy (irk, btm_cb.devcb.id_keys.irk, BT_OCTET16_LEN);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceDHK
+**
+** Description      This function is called to read the local device DHK.
+**
+** Returns          void
+**                  the local device DHK is copied into dhk
+**
+*******************************************************************************/
+void BTM_GetDeviceDHK (BT_OCTET16 dhk)
+{
+#if BLE_INCLUDED == TRUE
+    BTM_TRACE_DEBUG0 ("BTM_GetDeviceDHK");
+    memcpy (dhk, btm_cb.devcb.id_keys.dhk, BT_OCTET16_LEN);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadConnectionAddr
+**
+** Description      This function is called to set the local device random address
+**                  .
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_ReadConnectionAddr (BD_ADDR conn_addr)
+{
+#if BLE_INCLUDED == TRUE
+    BTM_TRACE_DEBUG0 ("BTM_ReadConnectionAddr");
+    if (btm_cb.ble_ctr_cb.inq_var.own_addr_type == BLE_ADDR_PUBLIC)
+    {
+        BTM_GetLocalDeviceAddr(conn_addr);
+    }
+    else
+    {
+        memcpy (conn_addr, btm_cb.ble_ctr_cb.addr_mgnt_cb.private_addr, BD_ADDR_LEN);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecurityGrant
+**
+** Description      This function is called to grant security process.
+**
+** Parameters       bd_addr - peer device bd address.
+**                  res     - result of the operation BTM_SUCCESS if success.
+**                            Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_REPEATED_ATTEMPTS;
+    BTM_TRACE_DEBUG0 ("BTM_SecurityGrant");
+    SMP_SecurityGrant(bd_addr, res_smp);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BlePasskeyReply
+**
+** Description      This function is called after Security Manager submitted
+**                  passkey request to the application.
+**
+** Parameters:      bd_addr      - Address of the device for which passkey was requested
+**                  res          - result of the operation BTM_SUCCESS if success
+**                  key_len      - length in bytes of the Passkey
+**                  p_passkey        - pointer to array with the passkey
+**                  trusted_mask - bitwise OR of trusted services (array of UINT32)
+**
+*******************************************************************************/
+void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
+    tSMP_STATUS      res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_PASSKEY_ENTRY_FAIL;
+
+    p_dev_rec->sec_flags   |= BTM_SEC_LINK_KEY_AUTHED;
+    BTM_TRACE_DEBUG0 ("BTM_BlePasskeyReply");
+    SMP_PasskeyReply(bd_addr, res_smp, passkey);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleOobDataReply
+**
+** Description      This function is called to provide the OOB data for
+**                  SMP in response to BTM_LE_OOB_REQ_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  res         - result of the operation SMP_SUCCESS if success
+**                  p_data      - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tSMP_STATUS res_smp = (res == BTM_SUCCESS) ? SMP_SUCCESS : SMP_OOB_FAIL;
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
+
+    BTM_TRACE_DEBUG0 ("BTM_BleOobDataReply");
+    p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
+    SMP_OobDataReply(bd_addr, res_smp, len, p_data);
+#endif
+}
+
+/******************************************************************************
+**
+** Function         BTM_BleSetConnScanParams
+**
+** Description      Set scan parameter used in BLE connection request
+**
+** Parameters:      scan_interval: scan interval
+**                  scan_window: scan window
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_BLE_CB *p_ble_cb = &btm_cb.ble_ctr_cb;
+    BOOLEAN     new_param = FALSE;
+
+    if (BTM_BLE_VALID_PRAM(scan_interval, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
+        BTM_BLE_VALID_PRAM(scan_window, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX))
+    {
+        btu_stop_timer(&p_ble_cb->scan_param_idle_timer);
+
+        if (p_ble_cb->scan_int != scan_interval)
+        {
+            p_ble_cb->scan_int = scan_interval;
+            new_param = TRUE;
+        }
+
+        if (p_ble_cb->scan_win != scan_window)
+        {
+            p_ble_cb->scan_win = scan_window;
+            new_param = TRUE;
+        }
+
+        if (new_param)
+            btm_ble_update_active_bgconn_scan_params();
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Illegal Connection Scan Parameters");
+    }
+#endif
+}
+
+/********************************************************
+**
+** Function         BTM_BleSetPrefConnParams
+**
+** Description      Set a peripheral's preferred connection parameters
+**
+** Parameters:      bd_addr          - BD address of the peripheral
+**                  scan_interval: scan interval
+**                  scan_window: scan window
+**                  min_conn_int     - minimum preferred connection interval
+**                  max_conn_int     - maximum preferred connection interval
+**                  slave_latency    - preferred slave latency
+**                  supervision_tout - preferred supervision timeout
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
+                               UINT16 min_conn_int, UINT16 max_conn_int,
+                               UINT16 slave_latency, UINT16 supervision_tout)
+{
+#if BLE_INCLUDED == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
+
+    BTM_TRACE_API4 ("BTM_BleSetPrefConnParams min: %u  max: %u  latency: %u  \
+                    tout: %u",
+                    min_conn_int, max_conn_int, slave_latency, supervision_tout);
+
+    if (BTM_BLE_VALID_PRAM(min_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
+        BTM_BLE_VALID_PRAM(max_conn_int, BTM_BLE_CONN_INT_MIN, BTM_BLE_CONN_INT_MAX) &&
+        BTM_BLE_VALID_PRAM(supervision_tout, BTM_BLE_CONN_SUP_TOUT_MIN, BTM_BLE_CONN_SUP_TOUT_MAX) &&
+        slave_latency <= BTM_BLE_CONN_LATENCY_MAX)
+    {
+        if (p_dev_rec)
+        {
+            /* expect conn int and stout and slave latency to be updated all together */
+            if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF || max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
+            {
+                if (min_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
+                    p_dev_rec->conn_params.min_conn_int = min_conn_int;
+                else
+                    p_dev_rec->conn_params.min_conn_int = max_conn_int;
+
+                if (max_conn_int != BTM_BLE_CONN_PARAM_UNDEF)
+                    p_dev_rec->conn_params.max_conn_int = max_conn_int;
+                else
+                    p_dev_rec->conn_params.max_conn_int = min_conn_int;
+
+                if (slave_latency != BTM_BLE_CONN_PARAM_UNDEF)
+                    p_dev_rec->conn_params.slave_latency = slave_latency;
+                else
+                    p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_SLAVE_LATENCY_DEF;
+
+                if (supervision_tout != BTM_BLE_CONN_PARAM_UNDEF)
+                    p_dev_rec->conn_params.supervision_tout = supervision_tout;
+                else
+                    p_dev_rec->conn_params.slave_latency = BTM_BLE_CONN_TIMEOUT_DEF;
+
+            }
+
+        }
+        else
+        {
+            BTM_TRACE_ERROR0("Unknown Device, setting rejected");
+        }
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Illegal Connection Parameters");
+    }
+#endif  /* BLE_INCLUDED */
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDevInfo
+**
+** Description      This function is called to read the device/address type
+**                  of BD address.
+**
+** Parameter        remote_bda: remote device address
+**                  p_dev_type: output parameter to read the device type.
+**                  p_addr_type: output parameter to read the address type.
+**
+*******************************************************************************/
+void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type, tBLE_ADDR_TYPE *p_addr_type)
+{
+#if BLE_INCLUDED == TRUE
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (remote_bda);
+    tBTM_INQ_INFO     *p_inq_info = BTM_InqDbRead(remote_bda);
+
+    *p_dev_type = BT_DEVICE_TYPE_BREDR;
+    *p_addr_type = BLE_ADDR_PUBLIC;
+
+    if (!p_dev_rec)
+    {
+        /* Check with the BT manager if details about remote device are known */
+        if (p_inq_info != NULL)
+        {
+            *p_dev_type = p_inq_info->results.device_type ;
+            *p_addr_type = p_inq_info->results.ble_addr_type;
+        }
+        /* unknown device, assume BR/EDR */
+    }
+    else /* there is a security device record exisitng */
+    {
+        /* new inquiry result, overwrite device type in security device record */
+        if (p_inq_info)
+        {
+            p_dev_rec->device_type          = p_inq_info->results.device_type;
+            p_dev_rec->ble.ble_addr_type    = p_inq_info->results.ble_addr_type;
+        }
+        *p_dev_type = p_dev_rec->device_type;
+        *p_addr_type = p_dev_rec->ble.ble_addr_type;
+
+    }
+
+    BTM_TRACE_DEBUG2 ("btm_find_dev_type - device_type = %d addr_type = %d", *p_dev_type , *p_addr_type);
+#endif
+
+    return;
+}
+
+
+/*******************************************************************************
+** Internal Functions
+*******************************************************************************/
+#if BLE_INCLUDED == TRUE
+
+/*******************************************************************************
+**
+** Function         btm_ble_update_active_bgconn_scan_params
+**
+** Description      This function is called to update the scan parameter if background
+**                  connection has been active.
+**
+*******************************************************************************/
+static void btm_ble_update_active_bgconn_scan_params(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    tBTM_BLE_SEL_CBACK   *p_select_cback;
+
+    /* if active , cancel and restart and apply the params */
+    if (p_cb->bg_conn_state == BLE_BG_CONN_ACTIVE)
+    {
+        if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
+        {
+            if (btm_ble_start_auto_conn(FALSE))
+                btm_ble_start_auto_conn(TRUE);
+        }
+        else if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+        {
+            p_select_cback = p_cb->p_select_cback;
+            if (btm_ble_start_select_conn(FALSE, NULL))
+                btm_ble_start_select_conn(TRUE, p_select_cback);
+        }
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_check_link_type
+**
+** Description      This function is to check the link type is BLE or BR/EDR.
+**
+** Returns          TRUE if BLE link; FALSE if BR/EDR.
+**
+*******************************************************************************/
+BOOLEAN btm_ble_check_link_type (BD_ADDR bd_addr)
+{
+    tACL_CONN         *p;
+    BTM_TRACE_DEBUG0 ("btm_ble_check_link_type");
+    if ((p = btm_bda_to_acl(bd_addr)) != NULL)
+        return p->is_le_link;
+    else
+        return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_rand_enc_complete
+**
+** Description      This function is the callback functions for HCI_Rand command
+**                  and HCI_Encrypt command is completed.
+**                  This message is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback)
+{
+    tBTM_RAND_ENC   params;
+    UINT8           *p_dest = params.param_buf;
+
+    BTM_TRACE_DEBUG0 ("btm_ble_rand_enc_complete");
+
+    memset(&params, 0, sizeof(tBTM_RAND_ENC));
+
+    /* If there was a callback address for vcs complete, call it */
+    if (p_enc_cplt_cback && p)
+    {
+        /* Pass paramters to the callback function */
+        STREAM_TO_UINT8(params.status, p); /* command status */
+
+        if (params.status == HCI_SUCCESS)
+        {
+            params.opcode = op_code;
+
+            if (op_code == HCI_BLE_RAND)
+                params.param_len = BT_OCTET8_LEN;
+            else
+                params.param_len = BT_OCTET16_LEN;
+
+            memcpy(p_dest, p, params.param_len);  /* Fetch return info from HCI event message */
+        }
+        if (p_enc_cplt_cback)
+            (*p_enc_cplt_cback)(&params);  /* Call the Encryption complete callback function */
+    }
+}
+
+
+#if (SMP_INCLUDED == TRUE)
+
+/*******************************************************************************
+**
+** Function         btm_ble_get_enc_key_type
+**
+** Description      This function is to increment local sign counter
+** Returns         None
+**
+*******************************************************************************/
+void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local )
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_DEBUG1 ("btm_ble_increment_sign_ctr is_local=%d", is_local);
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+    {
+        if (is_local)
+            p_dev_rec->ble.keys.local_counter++;
+        else
+            p_dev_rec->ble.keys.counter++;
+        BTM_TRACE_DEBUG3 ("is_local=%d local sign counter=%d peer sign counter=%d",
+                          is_local,
+                          p_dev_rec->ble.keys.local_counter,
+                          p_dev_rec->ble.keys.counter);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_get_enc_key_type
+**
+** Description      This function is to get the BLE key type that has been exchanged
+**                  in betweem local device and peer device.
+**
+** Returns          p_key_type: output parameter to carry the key type value.
+**
+*******************************************************************************/
+BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_DEBUG0 ("btm_ble_get_enc_key_type");
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+    {
+        *p_key_types = p_dev_rec->ble.key_type;
+        return TRUE;
+    }
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_local_div
+**
+** Description      This function is called to read the local DIV
+**
+** Returns          TURE - if a valid DIV is availavle
+*******************************************************************************/
+BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div)
+{
+    tBTM_SEC_DEV_REC   *p_dev_rec;
+    BOOLEAN            status = FALSE;
+    BTM_TRACE_DEBUG0 ("btm_get_local_div");
+
+    BTM_TRACE_DEBUG6("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                     bd_addr[0],bd_addr[1],
+                     bd_addr[2],bd_addr[3],
+                     bd_addr[4],bd_addr[5]);
+
+    p_dev_rec = btm_find_dev (bd_addr);
+
+    if (p_dev_rec && p_dev_rec->ble.keys.div)
+    {
+        status = TRUE;
+        *p_div = p_dev_rec->ble.keys.div;
+    }
+    BTM_TRACE_DEBUG2 ("btm_get_local_div status=%d (1-OK) DIV=0x%x", status, *p_div);
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_save_le_key
+**
+** Description      This function is called by the SMP to update
+**                  an  BLE key.  SMP is internal, whereas all the keys shall
+**                  be sent to the application.  The function is also called
+**                  when application passes ble key stored in NVRAM to the btm_sec.
+**                  pass_to_application parameter is false in this case.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys,
+                         BOOLEAN pass_to_application)
+{
+    tBTM_SEC_DEV_REC *p_rec;
+    tBTM_LE_EVT_DATA    cb_data;
+
+    BTM_TRACE_DEBUG2 ("btm_sec_save_le_key key_type=0x%x pass_to_application=%d",key_type, pass_to_application);
+    /* Store the updated key in the device database */
+
+    BTM_TRACE_DEBUG6("bd_addr:%02x-%02x-%02x-%02x-%02x-%02x",
+                     bd_addr[0],bd_addr[1],
+                     bd_addr[2],bd_addr[3],
+                     bd_addr[4],bd_addr[5]);
+
+    if ((p_rec = btm_find_dev (bd_addr)) != NULL && p_keys)
+    {
+        switch (key_type)
+        {
+            case BTM_LE_KEY_PENC:
+                memcpy(p_rec->ble.keys.ltk, p_keys->penc_key.ltk, BT_OCTET16_LEN);
+                memcpy(p_rec->ble.keys.rand, p_keys->penc_key.rand, BT_OCTET8_LEN);
+                p_rec->ble.keys.sec_level = p_keys->penc_key.sec_level;
+                p_rec->ble.keys.ediv = p_keys->penc_key.ediv;
+                p_rec->ble.keys.key_size = p_keys->penc_key.key_size;
+                p_rec->ble.key_type |= BTM_LE_KEY_PENC;
+                p_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN;
+                if (p_keys->penc_key.sec_level == SMP_SEC_AUTHENTICATED)
+                    p_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
+                else
+                    p_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED;
+                BTM_TRACE_DEBUG3("BTM_LE_KEY_PENC key_type=0x%x sec_flags=0x%x sec_leve=0x%x",
+                                 p_rec->ble.key_type,
+                                 p_rec->sec_flags,
+                                 p_rec->ble.keys.sec_level);
+                break;
+
+            case BTM_LE_KEY_PID:
+                memcpy(p_rec->ble.keys.irk, p_keys->pid_key, BT_OCTET16_LEN);
+                p_rec->ble.key_type |= BTM_LE_KEY_PID;
+                BTM_TRACE_DEBUG1("BTM_LE_KEY_PID key_type=0x%x save peer IRK",  p_rec->ble.key_type);
+                break;
+
+            case BTM_LE_KEY_PCSRK:
+                memcpy(p_rec->ble.keys.csrk, p_keys->pcsrk_key.csrk, BT_OCTET16_LEN);
+                p_rec->ble.keys.srk_sec_level = p_keys->pcsrk_key.sec_level;
+                p_rec->ble.keys.counter  = p_keys->pcsrk_key.counter;
+                p_rec->ble.key_type |= BTM_LE_KEY_PCSRK;
+                p_rec->sec_flags |=  BTM_SEC_LINK_KEY_KNOWN;
+                if ( p_keys->pcsrk_key.sec_level== SMP_SEC_AUTHENTICATED)
+                    p_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
+                else
+                    p_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED;
+
+                BTM_TRACE_DEBUG4("BTM_LE_KEY_PCSRK key_type=0x%x sec_flags=0x%x sec_level=0x%x peer_counter=%d",
+                                 p_rec->ble.key_type,
+                                 p_rec->sec_flags,
+                                 p_rec->ble.keys.srk_sec_level,
+                                 p_rec->ble.keys.counter );
+                break;
+
+            case BTM_LE_KEY_LENC:
+                p_rec->ble.keys.div = p_keys->lenc_key.div; /* update DIV */
+                p_rec->ble.keys.sec_level = p_keys->lenc_key.sec_level;
+                p_rec->ble.keys.key_size = p_keys->lenc_key.key_size;
+                p_rec->ble.key_type |= BTM_LE_KEY_LENC;
+
+                BTM_TRACE_DEBUG4("BTM_LE_KEY_LENC key_type=0x%x DIV=0x%x key_size=0x%x sec_level=0x%x",
+                                 p_rec->ble.key_type,
+                                 p_rec->ble.keys.div,
+                                 p_rec->ble.keys.key_size,
+                                 p_rec->ble.keys.sec_level );
+                break;
+
+            case BTM_LE_KEY_LCSRK:/* local CSRK has been delivered */
+                p_rec->ble.keys.div = p_keys->lcsrk_key.div; /* update DIV */
+                p_rec->ble.keys.local_csrk_sec_level = p_keys->lcsrk_key.sec_level;
+                p_rec->ble.keys.local_counter  = p_keys->lcsrk_key.counter;
+                p_rec->ble.key_type |= BTM_LE_KEY_LCSRK;
+                BTM_TRACE_DEBUG4("BTM_LE_KEY_LCSRK key_type=0x%x DIV=0x%x scrk_sec_level=0x%x local_counter=%d",
+                                 p_rec->ble.key_type,
+                                 p_rec->ble.keys.div,
+                                 p_rec->ble.keys.local_csrk_sec_level,
+                                 p_rec->ble.keys.local_counter );
+                break;
+
+            default:
+                BTM_TRACE_WARNING1("btm_sec_save_le_key (Bad key_type 0x%02x)", key_type);
+                return;
+        }
+
+        BTM_TRACE_DEBUG3 ("BLE key type 0x%02x updated for BDA: %08x%04x (btm_sec_save_le_key)", key_type,
+                          (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                          (bd_addr[4]<<8)+bd_addr[5]);
+
+        /* Notify the application that one of the BLE keys has been updated
+           If link key is in progress, it will get sent later.*/
+        if (pass_to_application && btm_cb.api.p_le_callback)
+        {
+            cb_data.key.p_key_value = p_keys;
+            cb_data.key.key_type = key_type;
+
+            (*btm_cb.api.p_le_callback) (BTM_LE_KEY_EVT, bd_addr, &cb_data);
+        }
+        return;
+    }
+
+    BTM_TRACE_WARNING3 ("BLE key type 0x%02x called for Unknown BDA or type: %08x%04x !! (btm_sec_save_le_key)", key_type,
+                        (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                        (bd_addr[4]<<8)+bd_addr[5]);
+
+    if (p_rec)
+    {
+        BTM_TRACE_DEBUG1 ("sec_flags=0x%x", p_rec->sec_flags);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_update_sec_key_size
+**
+** Description      update the current lin kencryption key size
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size)
+{
+    tBTM_SEC_DEV_REC *p_rec;
+
+    BTM_TRACE_DEBUG1("btm_ble_update_sec_key_size enc_key_size = %d", enc_key_size);
+
+    if ((p_rec = btm_find_dev (bd_addr)) != NULL )
+    {
+        p_rec->enc_key_size = enc_key_size;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_read_sec_key_size
+**
+** Description      update the current lin kencryption key size
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_rec;
+
+    if ((p_rec = btm_find_dev (bd_addr)) != NULL )
+    {
+        return p_rec->enc_key_size;
+    }
+    else
+        return 0;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_link_sec_check
+**
+** Description      Check BLE link security level match.
+**
+** Returns          TRUE: check is OK and the *p_sec_req_act contain the action
+**
+*******************************************************************************/
+void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bd_addr);
+    UINT8 req_sec_level, cur_sec_level;
+
+    BTM_TRACE_DEBUG1 ("btm_ble_link_sec_check auth_req =0x%x", auth_req);
+
+    if (p_dev_rec == NULL)
+    {
+        BTM_TRACE_ERROR0 ("btm_ble_link_sec_check received for unknown device");
+        return;
+    }
+
+    if (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING)
+    {
+        /* race condition: discard the security request while master is encrypting the link */
+        *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_DISCARD;
+    }
+    else
+    {
+        req_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
+        if ((auth_req == (BTM_LE_AUTH_REQ_BOND|BTM_LE_AUTH_REQ_MITM)) ||
+            (auth_req == (BTM_LE_AUTH_REQ_MITM)) )
+        {
+            req_sec_level = BTM_LE_SEC_AUTHENTICATED;
+        }
+
+        BTM_TRACE_DEBUG1 ("dev_rec sec_flags=0x%x", p_dev_rec->sec_flags);
+
+        /* currently encrpted  */
+        if (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)
+        {
+            if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED)
+                cur_sec_level = BTM_LE_SEC_AUTHENTICATED;
+            else
+                cur_sec_level = BTM_LE_SEC_UNAUTHENTICATE;
+        }
+        else /* unencrypted link */
+        {
+            /* if bonded, get the key security level */
+            if (p_dev_rec->ble.key_type & BTM_LE_KEY_PENC)
+                cur_sec_level = p_dev_rec->ble.keys.sec_level;
+            else
+                cur_sec_level = BTM_LE_SEC_NONE;
+        }
+
+        if (cur_sec_level >= req_sec_level)
+        {
+            if (cur_sec_level == BTM_LE_SEC_NONE)
+            {
+                *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_NONE;
+            }
+            else
+            {
+                /* To avoid re-encryption on an encrypted link for an equal condition encryption
+                if (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)
+                    *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_DISCARD;
+                else
+                */
+                    *p_sec_req_act = BTM_BLE_SEC_REQ_ACT_ENCRYPT;
+            }
+        }
+        else
+        {
+            *p_sec_req_act =  BTM_BLE_SEC_REQ_ACT_PAIR; /* start the pariring process to upgrade the keys*/
+        }
+    }
+
+    BTM_TRACE_DEBUG3("cur_sec_level=%d req_sec_level=%d sec_req_act=%d",
+                     cur_sec_level,
+                     req_sec_level,
+                     *p_sec_req_act);
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_set_encryption
+**
+** Description      This function is called to ensure that LE connection is
+**                  encrypted.  Should be called only on an open connection.
+**                  Typically only needed for connections that first want to
+**                  bring up unencrypted links, then later encrypt them.
+**
+** Returns          void
+**                  the local device ER is copied into er
+**
+*******************************************************************************/
+tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, void *p_ref_data, UINT8 link_role)
+{
+    tBTM_STATUS         cmd = BTM_NO_RESOURCES;
+    tBTM_BLE_SEC_ACT    sec_act = *(tBTM_BLE_SEC_ACT *)p_ref_data ;
+    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bd_addr);
+
+    BTM_TRACE_DEBUG2 ("btm_ble_set_encryption sec_act=0x%x role_master=%d", sec_act, p_rec->role_master);
+
+    if (p_rec == NULL)
+    {
+        return(BTM_WRONG_MODE);
+    }
+
+    if (sec_act == BTM_BLE_SEC_ENCRYPT_MITM)
+    {
+        p_rec->security_required |= BTM_SEC_IN_MITM;
+    }
+
+    switch (sec_act)
+    {
+        case BTM_BLE_SEC_ENCRYPT:
+            if (link_role == BTM_ROLE_MASTER)
+            {
+                /* start link layer encryption using the security info stored */
+                btm_ble_start_encrypt(bd_addr, FALSE, NULL);
+                p_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
+                cmd = BTM_CMD_STARTED;
+                break;
+            }
+            /* if salve role then fall through to call SMP_Pair below which will send a
+               sec_request to request the master to encrypt the link */
+        case BTM_BLE_SEC_ENCRYPT_NO_MITM:
+        case BTM_BLE_SEC_ENCRYPT_MITM:
+
+            if (SMP_Pair(bd_addr) == SMP_STARTED)
+            {
+                cmd = BTM_CMD_STARTED;
+                p_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
+            }
+            break;
+
+        default:
+            cmd = BTM_SUCCESS;
+            break;
+    }
+    return cmd;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_ltk_request
+**
+** Description      This function is called when encryption request is received
+**                  on a slave device.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv)
+{
+    tBTM_CB *p_cb = &btm_cb;
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev_by_handle (handle);
+    BT_OCTET8 dummy_stk = {0};
+
+    BTM_TRACE_DEBUG0 ("btm_ble_ltk_request");
+
+    p_cb->ediv = ediv;
+
+    memcpy(p_cb->enc_rand, rand, BT_OCTET8_LEN);
+
+    if (!smp_proc_ltk_request(p_dev_rec->bd_addr))
+        btm_ble_ltk_request_reply(p_dev_rec->bd_addr, FALSE, dummy_stk);
+
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_start_encrypt
+**
+** Description      This function is called to start LE encryption.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk)
+{
+    tBTM_CB *p_cb = &btm_cb;
+    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bda);
+    BT_OCTET8    dummy_rand = {0};
+
+    BTM_TRACE_DEBUG0 ("btm_ble_start_encrypt");
+
+    if (!p_rec ||
+        (p_rec && p_rec->sec_state == BTM_SEC_STATE_ENCRYPTING))
+        return FALSE;
+
+    if (p_rec->sec_state == BTM_SEC_STATE_IDLE)
+        p_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
+    p_cb->enc_handle = p_rec->hci_handle;
+
+    if (use_stk)
+    {
+        if (!btsnd_hcic_ble_start_enc(p_rec->hci_handle, dummy_rand, 0, stk))
+            return FALSE;
+    }
+    else
+    {
+        if (!btsnd_hcic_ble_start_enc(p_rec->hci_handle, p_rec->ble.keys.rand,
+                                      p_rec->ble.keys.ediv, p_rec->ble.keys.ltk))
+            return FALSE;
+    }
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_link_encrypted
+**
+** Description      This function is called when LE link encrption status is changed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable)
+{
+    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_dev (bd_addr);
+
+    BTM_TRACE_DEBUG1 ("btm_ble_link_encrypted encr_enable=%d", encr_enable);
+
+    smp_link_encrypted(bd_addr, encr_enable);
+
+    if (p_dev_rec)
+    {
+        BTM_TRACE_DEBUG1(" p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags);
+
+        if (encr_enable && p_dev_rec->enc_key_size == 0)
+            p_dev_rec->enc_key_size = p_dev_rec->ble.keys.key_size;
+
+        if (p_dev_rec->p_callback)
+        {
+            if (p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING)
+            {
+                if (encr_enable)
+                    btm_sec_dev_rec_cback_event(p_dev_rec, BTM_SUCCESS);
+                else if (p_dev_rec->role_master)
+                    btm_sec_dev_rec_cback_event(p_dev_rec, BTM_ERR_PROCESSING);
+            }
+        }
+        p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+    }
+}
+
+/*******************************************************************************
+** Function         btm_enc_proc_ltk
+** Description      send LTK reply when it's ready.
+*******************************************************************************/
+static void btm_enc_proc_ltk(tSMP_ENC *p)
+{
+    UINT8   i;
+    BTM_TRACE_DEBUG0 ("btm_enc_proc_ltk");
+    if (p && p->param_len == BT_OCTET16_LEN)
+    {
+        for (i = 0; i < (BT_OCTET16_LEN - btm_cb.key_size); i ++)
+            p->param_buf[BT_OCTET16_LEN - i - 1] = 0;
+        btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, p->param_buf);
+    }
+}
+
+/*******************************************************************************
+** Function         btm_enc_proc_slave_y
+** Description      calculate LTK when Y is ready
+*******************************************************************************/
+static void btm_enc_proc_slave_y(tSMP_ENC *p)
+{
+    UINT16  div, y;
+    UINT8   *pp = p->param_buf;
+    tBTM_CB *p_cb = &btm_cb;
+    tSMP_ENC output;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_DEBUG0 ("btm_enc_proc_slave_y");
+    if (p != NULL)
+    {
+        STREAM_TO_UINT16(y, pp);
+
+        div = p_cb->ediv ^ y;
+        p_dev_rec = btm_find_dev_by_handle (p_cb->enc_handle);
+
+        if ( p_dev_rec &&
+            p_dev_rec->ble.keys.div == div )
+        {
+            BTM_TRACE_DEBUG0 ("LTK request OK");
+            /* calculating LTK , LTK = E er(div) */
+            SMP_Encrypt(p_cb->devcb.er, BT_OCTET16_LEN, (UINT8 *)&div, 2, &output);
+            btm_enc_proc_ltk(&output);
+        }
+        else
+        {
+            BTM_TRACE_DEBUG0 ("LTK request failed - send negative reply");
+            btsnd_hcic_ble_ltk_req_neg_reply(p_cb->enc_handle);
+            if (p_dev_rec)
+                btm_ble_link_encrypted(p_dev_rec->bd_addr, 0);
+
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_ltk_request_reply
+**
+** Description      This function is called to send a LTK request reply on a slave
+**                  device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_ltk_request_reply(BD_ADDR bda,  BOOLEAN use_stk, BT_OCTET16 stk)
+{
+    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bda);
+    tBTM_CB *p_cb = &btm_cb;
+    tSMP_ENC output;
+
+    if (p_rec == NULL)
+    {
+        BTM_TRACE_ERROR0("btm_ble_ltk_request_reply received for unknown device");
+        return;
+    }
+
+    BTM_TRACE_DEBUG0 ("btm_ble_ltk_request_reply");
+    p_cb->enc_handle = p_rec->hci_handle;
+    p_cb->key_size = p_rec->ble.keys.key_size;
+
+    BTM_TRACE_ERROR1("key size = %d", p_rec->ble.keys.key_size);
+    if (use_stk)
+    {
+        btsnd_hcic_ble_ltk_req_reply(btm_cb.enc_handle, stk);
+    }
+    else /* calculate LTK using peer device  */
+    {
+        /* generate Y= Encrypt(DHK, Rand) received from encrypt request  */
+        SMP_Encrypt(p_cb->devcb.id_keys.dhk, BT_OCTET16_LEN, p_cb->enc_rand,
+                    BT_OCTET8_LEN, &output);
+        btm_enc_proc_slave_y(&output);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_io_capabilities_req
+**
+** Description      This function is called to handle SMP get IO capability request.
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8 btm_ble_io_capabilities_req(tBTM_SEC_DEV_REC *p_dev_rec, tBTM_LE_IO_REQ *p_data)
+{
+    UINT8           callback_rc = BTM_SUCCESS;
+    BTM_TRACE_DEBUG0 ("btm_ble_io_capabilities_req");
+    if (btm_cb.api.p_le_callback)
+    {
+        /* the callback function implementation may change the IO capability... */
+        callback_rc = (*btm_cb.api.p_le_callback) (BTM_LE_IO_REQ_EVT, p_dev_rec->bd_addr, (tBTM_LE_EVT_DATA *)p_data);
+    }
+#if BTM_OOB_INCLUDED == TRUE
+    if ((callback_rc == BTM_SUCCESS) || (BTM_OOB_UNKNOWN != p_data->oob_data))
+#else
+    if (callback_rc == BTM_SUCCESS)
+#endif
+    {
+        p_data->auth_req &= BTM_LE_AUTH_REQ_MASK;
+
+        BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 1: p_dev_rec->security_required = %d auth_req:%d",
+                          p_dev_rec->security_required, p_data->auth_req);
+        BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 2: i_keys=0x%x r_keys=0x%x (bit 0-LTK 1-IRK 2-CSRK)",
+                          p_data->init_keys,
+                          p_data->resp_keys);
+
+        /* if authentication requires MITM protection, put on the mask */
+        if (p_dev_rec->security_required & BTM_SEC_IN_MITM)
+            p_data->auth_req |= BTM_LE_AUTH_REQ_MITM;
+
+        if (!(p_data->auth_req & SMP_AUTH_BOND))
+        {
+            BTM_TRACE_DEBUG0("Non bonding: No keys should be exchanged");
+            p_data->init_keys = 0;
+            p_data->resp_keys = 0;
+        }
+
+        BTM_TRACE_DEBUG1 ("btm_ble_io_capabilities_req 3: auth_req:%d", p_data->auth_req);
+        BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 4: i_keys=0x%x r_keys=0x%x",
+                          p_data->init_keys,
+                          p_data->resp_keys);
+
+        BTM_TRACE_DEBUG2 ("btm_ble_io_capabilities_req 5: p_data->io_cap = %d auth_req:%d",
+                          p_data->io_cap, p_data->auth_req);
+
+        /* remove MITM protection requirement if IO cap does not allow it */
+        if ((p_data->io_cap == BTM_IO_CAP_NONE) && p_data->oob_data == SMP_OOB_NONE)
+            p_data->auth_req &= ~BTM_LE_AUTH_REQ_MITM;
+
+        BTM_TRACE_DEBUG3 ("btm_ble_io_capabilities_req 6: IO_CAP:%d oob_data:%d auth_req:%d",
+                          p_data->io_cap, p_data->oob_data, p_data->auth_req);
+    }
+    return callback_rc;
+}
+
+/*****************************************************************************
+**  Function        btm_proc_smp_cback
+**
+**  Description     This function is the SMP callback handler.
+**
+******************************************************************************/
+UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data)
+{
+    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_dev (bd_addr);
+    UINT8 res;
+
+    BTM_TRACE_DEBUG1 ("btm_proc_smp_cback event = %d", event);
+
+    if (p_dev_rec != NULL)
+    {
+        switch (event)
+        {
+            case SMP_IO_CAP_REQ_EVT:
+                btm_ble_io_capabilities_req(p_dev_rec, (tBTM_LE_IO_REQ *)&p_data->io_req);
+                break;
+
+            case SMP_PASSKEY_REQ_EVT:
+            case SMP_PASSKEY_NOTIF_EVT:
+            case SMP_OOB_REQ_EVT:
+                p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
+            case SMP_SEC_REQUEST_EVT:
+            case SMP_COMPLT_EVT:
+                if (btm_cb.api.p_le_callback)
+                {
+                    /* the callback function implementation may change the IO capability... */
+                    BTM_TRACE_DEBUG1 ("btm_cb.api.p_le_callback=0x%x", btm_cb.api.p_le_callback );
+                    (*btm_cb.api.p_le_callback) (event, bd_addr, (tBTM_LE_EVT_DATA *)p_data);
+                }
+                else
+                {
+                    BTM_TRACE_ERROR0 ("btm_proc_smp_cback: btm_cb.api.p_le_callback ==NULL");
+                }
+
+                if (event == SMP_COMPLT_EVT)
+                {
+                    BTM_TRACE_DEBUG2 ("evt=SMP_COMPLT_EVT before update sec_level=0x%x sec_flags=0x%x", p_data->cmplt.sec_level , p_dev_rec->sec_flags );
+
+                    res = (p_data->cmplt.reason == SMP_SUCCESS) ? BTM_SUCCESS : BTM_ERR_PROCESSING;
+
+                    BTM_TRACE_DEBUG3 ("after update result=%d sec_level=0x%x sec_flags=0x%x",
+                                      res, p_data->cmplt.sec_level , p_dev_rec->sec_flags );
+
+                    btm_sec_dev_rec_cback_event(p_dev_rec, res);
+
+                    if (p_data->cmplt.is_pair_cancel && btm_cb.api.p_bond_cancel_cmpl_callback )
+                    {
+                        BTM_TRACE_DEBUG0 ("Pairing Cancel completed");
+                        (*btm_cb.api.p_bond_cancel_cmpl_callback)(BTM_SUCCESS);
+                    }
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+                    if (res != BTM_SUCCESS)
+                    {
+                        if (!btm_cb.devcb.no_disc_if_pair_fail)
+                        {
+                            BTM_TRACE_DEBUG0 ("Pairing failed - Remove ACL");
+                            btm_remove_acl(bd_addr);
+                        }
+                        else
+                        {
+                            BTM_TRACE_DEBUG0 ("Pairing failed - Not Removing ACL");
+	                        p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+                        }
+                    }
+#else
+                    if (res != BTM_SUCCESS)
+                        btm_remove_acl(bd_addr);
+#endif
+
+                    BTM_TRACE_DEBUG3 ("btm_cb pairing_state=%x pairing_flags=%x pin_code_len=%x",
+                                      btm_cb.pairing_state,
+                                      btm_cb.pairing_flags,
+                                      btm_cb.pin_code_len  );
+                    BTM_TRACE_DEBUG6 ("btm_cb.pairing_bda %02x:%02x:%02x:%02x:%02x:%02x",
+                                      btm_cb.pairing_bda[0], btm_cb.pairing_bda[1], btm_cb.pairing_bda[2],
+                                      btm_cb.pairing_bda[3], btm_cb.pairing_bda[4], btm_cb.pairing_bda[5]);
+
+                    memset (btm_cb.pairing_bda, 0xff, BD_ADDR_LEN);
+                    btm_cb.pairing_flags = 0;
+                }
+                break;
+
+            default:
+                BTM_TRACE_DEBUG1 ("unknown event = %d", event);
+                break;
+
+
+        }
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("btm_proc_smp_cback received for unknown device");
+    }
+
+    return 0;
+}
+
+#endif  /* SMP_INCLUDED */
+#endif  /* BLE_INCLUDED */
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleDataSignature
+**
+** Description      This function is called to sign the data using AES128 CMAC
+**                  algorith.
+**
+** Parameter        bd_addr: target device the data to be signed for.
+**                  p_text: singing data
+**                  len: length of the data to be signed.
+**                  signature: output parameter where data signature is going to
+**                             be stored.
+**
+** Returns          TRUE if signing sucessul, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len,
+                              BLE_SIGNATURE signature)
+{
+    BOOLEAN     ret = FALSE;
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bd_addr);
+    UINT8   *p_buf, *pp;
+
+    BT_OCTET16  er;
+    UINT16      div;
+    UINT8       temp[4]; /* for (r || DIV)  r=1*/
+    UINT16      r=1;
+    UINT8       *p=temp, *p_mac = (UINT8 *)signature;
+    tSMP_ENC    output;
+    BT_OCTET16  local_csrk;
+
+    BTM_TRACE_DEBUG0 ("BTM_BleDataSignature");
+    if (p_rec == NULL)
+    {
+        BTM_TRACE_ERROR0("data signing can not be done from unknow device");
+    }
+    else
+    {
+        if ((p_buf = (UINT8 *)GKI_getbuf((UINT16)(len + 4))) != NULL)
+        {
+            BTM_TRACE_DEBUG0("Start to generate Local CSRK");
+            /* prepare plain text */
+            if (p_text)
+            {
+                memcpy(p_buf, p_text, len);
+                pp = (p_buf + len);
+            }
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+            if ( btm_cb.devcb.enable_test_local_sign_cntr)
+            {
+                BTM_TRACE_DEBUG1 ("Use Test local counter value from script counter_val=%d", btm_cb.devcb.test_local_sign_cntr);
+                UINT32_TO_STREAM(pp, btm_cb.devcb.test_local_sign_cntr);
+            }
+            else
+            {
+                UINT32_TO_STREAM(pp, p_rec->ble.keys.local_counter);
+            }
+#else
+            UINT32_TO_STREAM(pp, p_rec->ble.keys.local_counter);
+#endif
+            /* compute local csrk */
+            if (btm_get_local_div(bd_addr, &div))
+            {
+                BTM_TRACE_DEBUG1 ("compute_csrk div=%x", div);
+                BTM_GetDeviceEncRoot(er);
+
+                /* CSRK = d1(ER, DIV, 1) */
+                UINT16_TO_STREAM(p, div);
+                UINT16_TO_STREAM(p, r);
+
+                if (!SMP_Encrypt(er, BT_OCTET16_LEN, temp, 4, &output))
+                {
+                    BTM_TRACE_ERROR0("Local CSRK generation failed ");
+                }
+                else
+                {
+                    BTM_TRACE_DEBUG0("local CSRK generation success");
+                    memcpy((void *)local_csrk, output.param_buf, BT_OCTET16_LEN);
+
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+                    if (btm_cb.devcb.enable_test_local_sign_cntr)
+                    {
+                        UINT32_TO_STREAM(p_mac, btm_cb.devcb.test_local_sign_cntr);
+                    }
+                    else
+                    {
+                        UINT32_TO_STREAM(p_mac, p_rec->ble.keys.local_counter);
+                    }
+#else
+                    UINT32_TO_STREAM(p_mac, p_rec->ble.keys.local_counter);
+#endif
+
+                    if ((ret = AES_CMAC(local_csrk, p_buf, (UINT16)(len + 4), BTM_CMAC_TLEN_SIZE, p_mac)) == TRUE)
+                    {
+                        btm_ble_increment_sign_ctr(bd_addr, TRUE);
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+                        if ( btm_cb.devcb.enable_test_mac_val)
+                        {
+                            BTM_TRACE_DEBUG0 ("Use MAC value from script");
+                            memcpy(p_mac, btm_cb.devcb.test_mac, BTM_CMAC_TLEN_SIZE);
+                        }
+#endif
+                    }
+                    BTM_TRACE_DEBUG1("BTM_BleDataSignature p_mac = %d", p_mac);
+                    BTM_TRACE_DEBUG4("p_mac[0] = 0x%02x p_mac[1] = 0x%02x p_mac[2] = 0x%02x p_mac[3] = 0x%02x",
+                                     *p_mac, *(p_mac + 1), *(p_mac + 2), *(p_mac + 3));
+                    BTM_TRACE_DEBUG4("p_mac[4] = 0x%02x p_mac[5] = 0x%02x p_mac[6] = 0x%02x p_mac[7] = 0x%02x",
+                                     *(p_mac + 4), *(p_mac + 5), *(p_mac + 6), *(p_mac + 7));
+
+                    GKI_freebuf(p_buf);
+                }
+            }
+        }
+    }
+#endif  /* BLE_INCLUDED */
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleVerifySignature
+**
+** Description      This function is called to verify the data signature
+**
+** Parameter        bd_addr: target device the data to be signed for.
+**                  p_orig:  original data before signature.
+**                  len: length of the signing data
+**                  counter: counter used when doing data signing
+**                  p_comp: signature to be compared against.
+
+** Returns          TRUE if signature verified correctly; otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig, UINT16 len, UINT32 counter,
+                             UINT8 *p_comp)
+{
+    BOOLEAN             verified = FALSE;
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC    *p_rec = btm_find_dev (bd_addr);
+    UINT8               p_mac[BTM_CMAC_TLEN_SIZE];
+
+    if (p_rec == NULL || (p_rec && !(p_rec->ble.key_type & BTM_LE_KEY_PCSRK)))
+    {
+        BTM_TRACE_ERROR0("can not verify signature for unknown device");
+    }
+    else if (counter < p_rec->ble.keys.counter)
+    {
+        BTM_TRACE_ERROR0("signature received with out dated sign counter");
+    }
+    else if (p_orig == NULL)
+    {
+        BTM_TRACE_ERROR0("No signature to verify");
+    }
+    else
+    {
+        BTM_TRACE_DEBUG2 ("BTM_BleVerifySignature rcv_cnt=%d >= expected_cnt=%d", counter, p_rec->ble.keys.counter);
+
+        if (AES_CMAC(p_rec->ble.keys.csrk, p_orig, len, BTM_CMAC_TLEN_SIZE, p_mac))
+        {
+            if (memcmp(p_mac, p_comp, BTM_CMAC_TLEN_SIZE) == 0)
+            {
+                btm_ble_increment_sign_ctr(bd_addr, FALSE);
+                verified = TRUE;
+            }
+        }
+    }
+#endif  /* BLE_INCLUDED */
+    return verified;
+}
+
+#if BLE_INCLUDED == TRUE
+/*******************************************************************************
+**  Utility functions for LE device IR/ER generation
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         btm_notify_new_key
+**
+** Description      This function is to notify application new keys have been
+**                  generated.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_notify_new_key(UINT8 key_type)
+{
+    tBTM_BLE_LOCAL_KEYS *p_locak_keys = NULL;
+
+    BTM_TRACE_DEBUG1 ("btm_notify_new_key key_type=%d", key_type);
+
+    if (btm_cb.api.p_le_key_callback)
+    {
+        switch (key_type)
+        {
+            case BTM_BLE_KEY_TYPE_ID:
+                BTM_TRACE_DEBUG0 ("BTM_BLE_KEY_TYPE_ID");
+                p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.id_keys;
+                break;
+
+            case BTM_BLE_KEY_TYPE_ER:
+                BTM_TRACE_DEBUG0 ("BTM_BLE_KEY_TYPE_ER");
+                p_locak_keys = (tBTM_BLE_LOCAL_KEYS *)&btm_cb.devcb.er;
+                break;
+
+            default:
+                BTM_TRACE_ERROR1("unknown key type: %d", key_type);
+                break;
+        }
+        if (p_locak_keys != NULL)
+            (*btm_cb.api.p_le_key_callback) (key_type, p_locak_keys);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_er2
+**
+** Description      This function is called when ER is generated, store it in
+**                  local control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_er2(tBTM_RAND_ENC *p)
+{
+    BTM_TRACE_DEBUG0 ("btm_ble_process_er2");
+
+    if (p &&p->opcode == HCI_BLE_RAND)
+    {
+        memcpy(&btm_cb.devcb.er[8], p->param_buf, BT_OCTET8_LEN);
+        btm_notify_new_key(BTM_BLE_KEY_TYPE_ER);
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Generating ER2 exception.");
+        memset(&btm_cb.devcb.er, 0, sizeof(BT_OCTET16));
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_er
+**
+** Description      This function is called when ER is generated, store it in
+**                  local control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_er(tBTM_RAND_ENC *p)
+{
+    BTM_TRACE_DEBUG0 ("btm_ble_process_er");
+
+    if (p &&p->opcode == HCI_BLE_RAND)
+    {
+        memcpy(&btm_cb.devcb.er[0], p->param_buf, BT_OCTET8_LEN);
+
+        if (!btsnd_hcic_ble_rand((void *)btm_ble_process_er2))
+        {
+            memset(&btm_cb.devcb.er, 0, sizeof(BT_OCTET16));
+            BTM_TRACE_ERROR0("Generating ER2 failed.");
+        }
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Generating ER1 exception.");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_irk
+**
+** Description      This function is called when IRK is generated, store it in
+**                  local control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_irk(tSMP_ENC *p)
+{
+    BTM_TRACE_DEBUG0 ("btm_ble_process_irk");
+    if (p &&p->opcode == HCI_BLE_ENCRYPT)
+    {
+        memcpy(btm_cb.devcb.id_keys.irk, p->param_buf, BT_OCTET16_LEN);
+        btm_notify_new_key(BTM_BLE_KEY_TYPE_ID);
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Generating IRK exception.");
+    }
+
+    /* proceed generate ER */
+    if (!btsnd_hcic_ble_rand((void *)btm_ble_process_er))
+    {
+        BTM_TRACE_ERROR0("Generating ER failed.");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_dhk
+**
+** Description      This function is called when DHK is calculated, store it in
+**                  local control block, and proceed to generate ER, a 128-bits
+**                  random number.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_dhk(tSMP_ENC *p)
+{
+#if SMP_INCLUDED == TRUE
+    UINT8 btm_ble_irk_pt = 0x01;
+    tSMP_ENC output;
+
+    BTM_TRACE_DEBUG0 ("btm_ble_process_dhk");
+
+    if (p && p->opcode == HCI_BLE_ENCRYPT)
+    {
+        memcpy(btm_cb.devcb.id_keys.dhk, p->param_buf, BT_OCTET16_LEN);
+        BTM_TRACE_DEBUG0("BLE DHK generated.");
+
+        /* IRK = D1(IR, 1) */
+        if (!SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_irk_pt,
+                         1,   &output))
+        {
+            /* reset all identity root related key */
+            memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
+        }
+        else
+        {
+            btm_ble_process_irk(&output);
+        }
+    }
+    else
+    {
+        /* reset all identity root related key */
+        memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_ir2
+**
+** Description      This function is called when IR is generated, proceed to calculate
+**                  DHK = Eir({0x03, 0, 0 ...})
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_ir2(tBTM_RAND_ENC *p)
+{
+#if SMP_INCLUDED == TRUE
+    UINT8 btm_ble_dhk_pt = 0x03;
+    tSMP_ENC output;
+
+    BTM_TRACE_DEBUG0 ("btm_ble_process_ir2");
+
+    if (p && p->opcode == HCI_BLE_RAND)
+    {
+        /* remembering in control block */
+        memcpy(&btm_cb.devcb.id_keys.ir[8], p->param_buf, BT_OCTET8_LEN);
+        /* generate DHK= Eir({0x03, 0x00, 0x00 ...}) */
+
+
+        SMP_Encrypt(btm_cb.devcb.id_keys.ir, BT_OCTET16_LEN, &btm_ble_dhk_pt,
+                    1, &output);
+        btm_ble_process_dhk(&output);
+
+        BTM_TRACE_DEBUG0("BLE IR generated.");
+    }
+    else
+    {
+        memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_ir
+**
+** Description      This function is called when IR is generated, proceed to calculate
+**                  DHK = Eir({0x02, 0, 0 ...})
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_ir(tBTM_RAND_ENC *p)
+{
+    BTM_TRACE_DEBUG0 ("btm_ble_process_ir");
+
+    if (p && p->opcode == HCI_BLE_RAND)
+    {
+        /* remembering in control block */
+        memcpy(btm_cb.devcb.id_keys.ir, p->param_buf, BT_OCTET8_LEN);
+
+        if (!btsnd_hcic_ble_rand((void *)btm_ble_process_ir2))
+        {
+            BTM_TRACE_ERROR0("Generating IR2 failed.");
+            memset(&btm_cb.devcb.id_keys, 0, sizeof(tBTM_BLE_LOCAL_ID_KEYS));
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_reset_id
+**
+** Description      This function is called to reset LE device identity.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_reset_id( void )
+{
+    BTM_TRACE_DEBUG0 ("btm_ble_reset_id");
+
+    /* regenrate Identity Root*/
+    if (!btsnd_hcic_ble_rand((void *)btm_ble_process_ir))
+    {
+        BTM_TRACE_DEBUG0("Generating IR failed.");
+    }
+}
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+/*******************************************************************************
+**
+** Function         btm_ble_set_no_disc_if_pair_fail
+**
+** Description      This function indicates that whether no disconnect of the ACL
+**                  should be used if pairing failed
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_set_no_disc_if_pair_fail(BOOLEAN disable_disc )
+{
+    BTM_TRACE_DEBUG1 ("btm_ble_set_disc_enable_if_pair_fail disable_disc=%d", disable_disc);
+    btm_cb.devcb.no_disc_if_pair_fail = disable_disc;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_set_test_mac_value
+**
+** Description      This function set test MAC value
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_set_test_mac_value(BOOLEAN enable, UINT8 *p_test_mac_val )
+{
+    BTM_TRACE_DEBUG1 ("btm_ble_set_test_mac_value enable=%d", enable);
+    btm_cb.devcb.enable_test_mac_val = enable;
+    memcpy(btm_cb.devcb.test_mac, p_test_mac_val, BT_OCTET8_LEN);
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_set_test_local_sign_cntr_value
+**
+** Description      This function set test local sign counter value
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr )
+{
+    BTM_TRACE_DEBUG2 ("btm_ble_set_test_local_sign_cntr_value enable=%d local_sign_cntr=%d",
+                      enable, test_local_sign_cntr);
+    btm_cb.devcb.enable_test_local_sign_cntr = enable;
+    btm_cb.devcb.test_local_sign_cntr =  test_local_sign_cntr;
+}
+
+#endif /* BTM_BLE_CONFORMANCE_TESTING */
+
+
+#endif /* BLE_INCLUDED */
diff --git a/stack/btm/btm_ble_addr.c b/stack/btm/btm_ble_addr.c
new file mode 100644
index 0000000..04872f9
--- /dev/null
+++ b/stack/btm/btm_ble_addr.c
@@ -0,0 +1,383 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for BLE address management.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_int.h"
+
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+    #include "smp_api.h"
+    #define BTM_BLE_PRIVATE_ADDR_INT    900             /* 15 minutes minimum for random address refreshing */
+
+/*******************************************************************************
+**
+** Function         btm_gen_resolve_paddr_cmpl
+**
+** Description      This is callback functioin when resolvable private address
+**                  generation is complete.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_gen_resolve_paddr_cmpl(tSMP_ENC *p)
+{
+    tBTM_LE_RANDOM_CB *p_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    tBTM_BLE_INQ_CB  *p_inq_cb = &btm_cb.ble_ctr_cb.inq_var;
+    BTM_TRACE_EVENT0 ("btm_gen_resolve_paddr_cmpl");
+    if (p && p->param_buf)
+    {
+        /* get the high bytes of the random address */
+        p_cb->private_addr[2] = p->param_buf[0];
+        p_cb->private_addr[1] = p->param_buf[1];
+        p_cb->private_addr[0] = p->param_buf[2];
+        /* mask off the 1st MSB */
+        p_cb->private_addr[0] &= 0xfe;
+        /* set the 2nd MSB to be 1 */
+        p_cb->private_addr[0] |= 0x02;
+        /* set it to controller */
+        btsnd_hcic_ble_set_random_addr(p_cb->private_addr);
+
+        p_inq_cb->own_addr_type = BLE_ADDR_RANDOM;
+
+        /* start a periodical timer to refresh random addr */
+        btu_stop_timer(&p_cb->raddr_timer_ent);
+        btu_start_timer (&p_cb->raddr_timer_ent, BTU_TTYPE_BLE_RANDOM_ADDR,
+                         BTM_BLE_PRIVATE_ADDR_INT);
+
+        /* if adv is active, restart adv with new private addr */
+        if (p_inq_cb->adv_mode == BTM_BLE_ADV_ENABLE)
+        {
+            btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE);
+
+            btsnd_hcic_ble_write_adv_params (p_inq_cb->adv_interval_min,
+                                             p_inq_cb->adv_interval_max,
+                                             p_inq_cb->evt_type,
+                                             p_inq_cb->own_addr_type,
+                                             p_inq_cb->direct_bda.type,
+                                             p_inq_cb->direct_bda.bda,
+                                             p_inq_cb->adv_chnl_map,
+                                             p_inq_cb->afp);
+        }
+    }
+    else
+    {
+        /* random address set failure */
+        BTM_TRACE_DEBUG0("set random address failed");
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_gen_resolve_paddr_low
+**
+** Description      This function is called when random address has generate the
+**                  random number base for low 3 byte bd address.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_gen_resolve_paddr_low(tBTM_RAND_ENC *p)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_LE_RANDOM_CB *p_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    tSMP_ENC    output;
+
+    BTM_TRACE_EVENT0 ("btm_gen_resolve_paddr_low");
+    if (p && p->param_buf)
+    {
+        p_cb->private_addr[5] = p->param_buf[0];
+        p_cb->private_addr[4] = p->param_buf[1];
+        p_cb->private_addr[3] = p->param_buf[2];
+
+        /* encrypt with ur IRK */
+        if (!SMP_Encrypt(btm_cb.devcb.id_keys.irk, BT_OCTET16_LEN, p->param_buf, 3, &output))
+        {
+            btm_gen_resolve_paddr_cmpl(NULL);
+        }
+        else
+        {
+            btm_gen_resolve_paddr_cmpl(&output);
+        }
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         btm_gen_resolvable_private_addr
+**
+** Description      This function generate a resolvable private address.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_gen_resolvable_private_addr (void)
+{
+    BTM_TRACE_EVENT0 ("btm_gen_resolvable_private_addr");
+    /* generate 3B rand as BD LSB, SRK with it, get BD MSB */
+    if (!btsnd_hcic_ble_rand((void *)btm_gen_resolve_paddr_low))
+        btm_gen_resolve_paddr_cmpl(NULL);
+}
+/*******************************************************************************
+**
+** Function         btm_gen_non_resolve_paddr_cmpl
+**
+** Description      This is the callback function when non-resolvable private
+**                  function is generated and write to controller.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_gen_non_resolve_paddr_cmpl(tBTM_RAND_ENC *p)
+{
+    tBTM_LE_RANDOM_CB *p_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    UINT8   *pp;
+    BTM_TRACE_EVENT0 ("btm_gen_non_resolve_paddr_cmpl");
+    if (p && p->param_buf)
+    {
+        pp = p->param_buf;
+        STREAM_TO_BDADDR(p_cb->private_addr, pp);
+        /* mask off the 2 MSB */
+        p_cb->private_addr[0] &= 0xfc;
+        /* write to controller */
+        btsnd_hcic_ble_set_random_addr(p_cb->private_addr);
+
+        btm_cb.ble_ctr_cb.inq_var.own_addr_type = BLE_ADDR_RANDOM;
+    }
+    else
+    {
+        BTM_TRACE_DEBUG0("btm_gen_non_resolvable_private_addr failed");
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_gen_non_resolvable_private_addr
+**
+** Description      This function generate a non-resolvable private address.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_gen_non_resolvable_private_addr (void)
+{
+    BTM_TRACE_EVENT0 ("btm_gen_non_resolvable_private_addr");
+    if (!btsnd_hcic_ble_rand((void *)btm_gen_non_resolve_paddr_cmpl))
+    {
+        btm_gen_non_resolve_paddr_cmpl(NULL);
+    }
+}
+    #if SMP_INCLUDED == TRUE
+/*******************************************************************************
+**  Utility functions for Random address resolving
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         btm_ble_resolve_address_cmpl
+**
+** Description      This function sends the random address resolving complete
+**                  callback.
+**
+** Returns          None.
+**
+*******************************************************************************/
+static void btm_ble_resolve_address_cmpl(void)
+{
+    tBTM_LE_RANDOM_CB   *p_mgnt_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    tBTM_SEC_DEV_REC    *p_dev_rec = NULL;
+
+    BTM_TRACE_EVENT0 ("btm_ble_resolve_address_cmpl");
+    if (p_mgnt_cb->index < BTM_SEC_MAX_DEVICE_RECORDS)
+        p_dev_rec = &btm_cb.sec_dev_rec[p_mgnt_cb->index];
+
+    p_mgnt_cb->busy = FALSE;
+
+    (* p_mgnt_cb->p_resolve_cback)(p_dev_rec, p_mgnt_cb->p);
+}
+/*******************************************************************************
+**
+** Function         btm_ble_proc_resolve_x
+**
+** Description      This function compares the X with random address 3 MSO bytes
+**                  to find a match, if not match, continue for next record.
+**
+** Returns          None.
+**
+*******************************************************************************/
+static BOOLEAN btm_ble_proc_resolve_x(tSMP_ENC *p)
+{
+    tBTM_LE_RANDOM_CB   *p_mgnt_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    UINT8    comp[3];
+    BTM_TRACE_EVENT0 ("btm_ble_proc_resolve_x");
+    /* compare the hash with 3 LSB of bd address */
+    comp[0] = p_mgnt_cb->random_bda[5];
+    comp[1] = p_mgnt_cb->random_bda[4];
+    comp[2] = p_mgnt_cb->random_bda[3];
+
+    if (p && p->param_buf)
+    {
+        if (!memcmp(p->param_buf, &comp[0], 3))
+        {
+            /* match is found */
+            BTM_TRACE_EVENT0 ("match is found");
+            btm_ble_resolve_address_cmpl();
+            return TRUE;
+        }
+    }
+    return FALSE;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_match_random_bda
+**
+** Description      This function match the random address to the appointed device
+**                  record, starting from calculating IRK. If record index exceed
+**                  the maximum record number, matching failed and send callback.
+**
+** Returns          None.
+**
+*******************************************************************************/
+static BOOLEAN btm_ble_match_random_bda(UINT16 rec_index)
+{
+#if (BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE)
+    tBTM_SEC_DEV_REC    *p_dev_rec;
+    tBTM_LE_RANDOM_CB   *p_mgnt_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+    UINT8       rand[3];
+    tSMP_ENC    output;
+
+    /* use the 3 MSB of bd address as prand */
+    rand[0] = p_mgnt_cb->random_bda[2];
+    rand[1] = p_mgnt_cb->random_bda[1];
+    rand[2] = p_mgnt_cb->random_bda[0];
+
+    BTM_TRACE_EVENT1("btm_ble_match_random_bda rec_index = %d", rec_index);
+
+    if (rec_index < BTM_SEC_MAX_DEVICE_RECORDS)
+    {
+        p_dev_rec = &btm_cb.sec_dev_rec[rec_index];
+
+        BTM_TRACE_ERROR2("sec_flags = %02x device_type = %d", p_dev_rec->sec_flags, p_dev_rec->device_type);
+
+        if ((p_dev_rec->device_type == BT_DEVICE_TYPE_BLE) &&
+            (p_dev_rec->ble.key_type & BTM_LE_KEY_PID))
+        {
+            /* generate X = E irk(R0, R1, R2) and R is random address 3 LSO */
+            SMP_Encrypt(p_dev_rec->ble.keys.irk, BT_OCTET16_LEN,
+                        &rand[0], 3, &output);
+            return btm_ble_proc_resolve_x(&output);
+        }
+        else
+        {
+            // not completed
+            return FALSE;
+        }
+    }
+    else /* no  match found */
+    {
+        btm_ble_resolve_address_cmpl();
+        return TRUE;
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_resolve_random_addr
+**
+** Description      This function is called to resolve a random address.
+**
+** Returns          pointer to the security record of the device whom a random
+**                  address is matched to.
+**
+*******************************************************************************/
+void btm_ble_resolve_random_addr(BD_ADDR random_bda, tBTM_BLE_RESOLVE_CBACK * p_cback, void *p)
+{
+    tBTM_LE_RANDOM_CB   *p_mgnt_cb = &btm_cb.ble_ctr_cb.addr_mgnt_cb;
+
+    BTM_TRACE_EVENT0 ("btm_ble_resolve_random_addr");
+    if ( !p_mgnt_cb->busy)
+    {
+        p_mgnt_cb->p = p;
+        p_mgnt_cb->busy = TRUE;
+        p_mgnt_cb->index = 0;
+        p_mgnt_cb->p_resolve_cback = p_cback;
+        memcpy(p_mgnt_cb->random_bda, random_bda, BD_ADDR_LEN);
+        /* start to resolve random address */
+        /* check for next security record */
+        while (TRUE)
+        {
+            if (btm_ble_match_random_bda(p_mgnt_cb->index++))
+            {
+                // match found or went through the list
+                break;
+            }
+        }
+    }
+    else
+        (*p_cback)(NULL, p);
+}
+    #endif
+/*******************************************************************************
+**  address mapping between pseudo address and real connection address
+*******************************************************************************/
+/*******************************************************************************
+**
+** Function         btm_ble_map_bda_to_conn_bda
+**
+** Description      This function map a BD address to the real connection address
+**                  and return the connection address type.
+*******************************************************************************/
+tBLE_ADDR_TYPE btm_ble_map_bda_to_conn_bda(BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC    *p_dev_rec = NULL;
+    BTM_TRACE_EVENT0 ("btm_ble_map_bda_to_conn_bda");
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL &&
+        p_dev_rec->device_type == BT_DEVICE_TYPE_BLE)
+    {
+        if (p_dev_rec->ble.ble_addr_type != BLE_ADDR_PUBLIC)
+        {
+            memcpy(bd_addr, p_dev_rec->ble.static_addr, BD_ADDR_LEN);
+        }
+        return p_dev_rec->ble.ble_addr_type;
+    }
+    else
+        return BLE_ADDR_PUBLIC;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_map_bda_to_pseudo_bda
+**
+** Description      This function map a BD address to a pseudo address when the
+**                  address given is a random address.
+**
+*******************************************************************************/
+void btm_ble_map_bda_to_pseudo_bda(BD_ADDR bd_addr)
+{
+    BTM_TRACE_EVENT0 ("btm_ble_map_bda_to_pseudo_bda");
+}
+#endif
+
+
diff --git a/stack/btm/btm_ble_bgconn.c b/stack/btm/btm_ble_bgconn.c
new file mode 100644
index 0000000..aa002e8
--- /dev/null
+++ b/stack/btm/btm_ble_bgconn.c
@@ -0,0 +1,616 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for BLE whitelist operation.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+
+#include "bt_types.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "l2c_int.h"
+#include "hcimsgs.h"
+
+#ifndef BTM_BLE_SCAN_PARAM_TOUT
+#define BTM_BLE_SCAN_PARAM_TOUT      50    /* 50 seconds */
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btm_update_scanner_filter_policy
+**
+** Description      This function update the filter policy of scnner or advertiser.
+*******************************************************************************/
+void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy)
+{
+    tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var;
+    BTM_TRACE_EVENT0 ("btm_update_scanner_filter_policy");
+    btm_cb.ble_ctr_cb.inq_var.sfp = scan_policy;
+
+    btsnd_hcic_ble_set_scan_params ((UINT8)((p_inq->scan_type == BTM_BLE_SCAN_MODE_NONE) ? BTM_BLE_SCAN_MODE_ACTI: p_inq->scan_type),
+                                    (UINT16)(!p_inq->scan_interval ? BTM_BLE_GAP_DISC_SCAN_INT : p_inq->scan_interval),
+                                    (UINT16)(!p_inq->scan_window ? BTM_BLE_GAP_DISC_SCAN_WIN : p_inq->scan_window),
+                                     BLE_ADDR_PUBLIC,
+                                     scan_policy);
+}
+/*******************************************************************************
+**
+** Function         btm_update_adv_filter_policy
+**
+** Description      This function update the filter policy of scnner or advertiser.
+*******************************************************************************/
+void btm_update_adv_filter_policy(tBTM_BLE_AFP adv_policy)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    BTM_TRACE_EVENT0 ("btm_update_adv_filter_policy");
+    p_cb->afp = adv_policy;
+}
+/*******************************************************************************
+**
+** Function         btm_update_dev_to_white_list
+**
+** Description      This function adds a device into white list.
+*******************************************************************************/
+BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type)
+{
+    /* look up the sec device record, and find the address */
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    tBTM_SEC_DEV_REC    *p_dev_rec;
+    BD_ADDR             dummy_bda = {0};
+    BOOLEAN             started = FALSE, suspend = FALSE;
+
+    if (btm_cb.btm_inq_vars.inq_active)
+    {
+        suspend = TRUE;
+        btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_DISABLE, BTM_BLE_DUPLICATE_ENABLE);
+    }
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL &&
+        p_dev_rec->device_type == BT_DEVICE_TYPE_BLE)
+    {
+        BTM_TRACE_DEBUG0("btm_update_dev_to_white_list 1");
+
+        if ((to_add && p_cb->num_empty_filter == 0) ||
+            (!to_add && p_cb->num_empty_filter == p_cb->max_filter_entries))
+        {
+            BTM_TRACE_ERROR1("num_entry available in controller: %d", p_cb->num_empty_filter);
+            return started;
+        }
+
+
+        if ( p_dev_rec->ble.ble_addr_type == BLE_ADDR_PUBLIC)
+        {
+            if (to_add)
+                started = btsnd_hcic_ble_add_white_list (BLE_ADDR_PUBLIC, bd_addr);
+            else
+                started = btsnd_hcic_ble_remove_from_white_list (BLE_ADDR_PUBLIC, bd_addr);
+        }
+        else
+        {
+            if (BLE_ADDR_IS_STATIC(bd_addr))
+            {
+                if (to_add)
+                    started = btsnd_hcic_ble_add_white_list (BLE_ADDR_RANDOM, bd_addr);
+                else
+                    started = btsnd_hcic_ble_remove_from_white_list (BLE_ADDR_RANDOM, bd_addr);
+
+            }
+            if (memcmp(p_dev_rec->ble.reconn_addr, dummy_bda, BD_ADDR_LEN) != 0)
+            {
+                if (to_add)
+                    started = btsnd_hcic_ble_add_white_list (BLE_ADDR_RANDOM, p_dev_rec->ble.reconn_addr);
+                else
+                    started = btsnd_hcic_ble_remove_from_white_list (BLE_ADDR_RANDOM, p_dev_rec->ble.reconn_addr);
+            }
+        }
+    }
+    /* if not a known device, shall we add it? */
+    else
+    {
+        if (to_add)
+            started = btsnd_hcic_ble_add_white_list (addr_type, bd_addr);
+        else
+            started = btsnd_hcic_ble_remove_from_white_list (addr_type, bd_addr);
+    }
+
+    if (suspend)
+    {
+        btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_ENABLE, BTM_BLE_DUPLICATE_DISABLE);
+    }
+
+    return started;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_clear_white_list
+**
+** Description      This function clears the white list.
+*******************************************************************************/
+void btm_ble_clear_white_list (void)
+{
+    BTM_TRACE_EVENT0 ("btm_ble_clear_white_list");
+    btsnd_hcic_ble_clear_white_list();
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_clear_white_list_complete
+**
+** Description      This function clears the white list complete.
+*******************************************************************************/
+void btm_ble_clear_white_list_complete(UINT8 *p_data, UINT16 evt_len)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT8       status;
+    BTM_TRACE_EVENT0 ("btm_ble_clear_white_list_complete");
+    STREAM_TO_UINT8  (status, p_data);
+
+    if (status == HCI_SUCCESS)
+        p_cb->num_empty_filter = p_cb->max_filter_entries;
+
+}
+/*******************************************************************************
+**
+** Function         btm_ble_add_2_white_list_complete
+**
+** Description      This function read the current white list size.
+*******************************************************************************/
+void btm_ble_add_2_white_list_complete(UINT8 *p, UINT16 evt_len)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BTM_TRACE_EVENT0 ("btm_ble_add_2_white_list_complete");
+
+    if (*p == HCI_SUCCESS)
+    {
+        p_cb->num_empty_filter --;
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_add_2_white_list_complete
+**
+** Description      This function read the current white list size.
+*******************************************************************************/
+void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BTM_TRACE_EVENT0 ("btm_ble_remove_from_white_list_complete");
+    if (*p == HCI_SUCCESS)
+    {
+        p_cb->num_empty_filter ++;
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_find_dev_in_whitelist
+**
+** Description      This function check if the device is in the white list
+*******************************************************************************/
+BOOLEAN btm_ble_find_dev_in_whitelist(BD_ADDR bd_addr)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT8 i;
+
+    BTM_TRACE_EVENT0 ("btm_ble_find_dev_in_whitelist");
+
+    /* empty wl */
+    if (p_cb->num_empty_filter == p_cb->max_filter_entries)
+    {
+        BTM_TRACE_DEBUG0("white list empty");
+        return FALSE;
+    }
+
+    for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM && i < p_cb->max_filter_entries; i ++)
+    {
+        if (memcmp(p_cb->bg_conn_dev_list[i], bd_addr, BD_ADDR_LEN) == 0)
+            return TRUE;
+    }
+    return FALSE;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_count_unconn_dev_in_whitelist
+**
+** Description      This function check the number of unconnected device in white list.
+*******************************************************************************/
+UINT8 btm_ble_count_unconn_dev_in_whitelist(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT8 count = 0, i;
+    BD_ADDR dummy_bda ={0};
+
+    BTM_TRACE_EVENT0 ("btm_ble_find_dev_in_whitelist");
+
+    for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM && i < p_cb->max_filter_entries; i ++)
+    {
+        if (memcmp(p_cb->bg_conn_dev_list[i], dummy_bda, BD_ADDR_LEN) != 0 &&
+            !BTM_IsAclConnectionUp(p_cb->bg_conn_dev_list[i]))
+        {
+            count ++;
+        }
+    }
+    return count;
+}
+/*******************************************************************************
+**
+** Function         btm_update_bg_conn_list
+**
+** Description      This function update the local background connection device list.
+*******************************************************************************/
+BOOLEAN btm_update_bg_conn_list(BOOLEAN to_add, BD_ADDR bd_addr)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT8 i;
+    BD_ADDR dummy_bda = {0};
+    BTM_TRACE_EVENT0 ("btm_update_bg_conn_list");
+    if ((to_add && (p_cb->bg_conn_dev_num == BTM_BLE_MAX_BG_CONN_DEV_NUM || p_cb->num_empty_filter == 0)) ||
+        (!to_add && p_cb->num_empty_filter == p_cb->max_filter_entries))
+    {
+        BTM_TRACE_DEBUG1("num_empty_filter = %d", p_cb->num_empty_filter);
+        return FALSE;
+    }
+
+    for (i = 0; i < BTM_BLE_MAX_BG_CONN_DEV_NUM && i < p_cb->max_filter_entries; i ++)
+    {
+        /* to add */
+        if (memcmp(p_cb->bg_conn_dev_list[i], dummy_bda, BD_ADDR_LEN) == 0 && to_add)
+        {
+            memcpy(p_cb->bg_conn_dev_list[i], bd_addr, BD_ADDR_LEN);
+            p_cb->bg_conn_dev_num ++;
+            return TRUE;
+        }
+        /* to remove */
+        if (!to_add && memcmp(p_cb->bg_conn_dev_list[i], bd_addr, BD_ADDR_LEN) == 0)
+        {
+            memset(p_cb->bg_conn_dev_list[i], 0, BD_ADDR_LEN);
+            p_cb->bg_conn_dev_num --;
+            return TRUE;
+        }
+    }
+    return FALSE;
+}
+/*******************************************************************************
+**
+** Function         btm_write_bg_conn_wl
+**
+** Description      This function write background connection device list into
+**                  controller.
+*******************************************************************************/
+void btm_write_bg_conn_wl(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT8       i;
+    BTM_TRACE_EVENT0 ("btm_write_bg_conn_wl");
+    btm_ble_clear_white_list();
+
+    for (i = 0; i < p_cb->bg_conn_dev_num; i ++)
+    {
+        if (!btm_update_dev_to_white_list(TRUE, p_cb->bg_conn_dev_list[i], BLE_ADDR_PUBLIC))
+            break;
+    }
+    return;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_start_auto_conn
+**
+** Description      This function is to start/stop auto connection procedure.
+**
+** Parameters       start: TRUE to start; FALSE to stop.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_ble_start_auto_conn(BOOLEAN start)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BD_ADDR dummy_bda = {0};
+    BOOLEAN exec = TRUE;
+    UINT16 scan_int, scan_win;
+
+    scan_int = (p_cb->scan_int == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_CONN_EST_SCAN_INT : p_cb->scan_int;
+    scan_win = (p_cb->scan_win == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_CONN_EST_SCAN_WIND : p_cb->scan_win;
+
+    if (start)
+    {
+        if (!l2cb.is_ble_connecting &&
+            btm_ble_count_unconn_dev_in_whitelist() > 0)
+        {
+            if (p_cb->bg_conn_state != BLE_BG_CONN_ACTIVE && p_cb->bg_conn_dev_num > 0)
+            {
+                if (!btsnd_hcic_ble_create_ll_conn (scan_int,  /* UINT16 scan_int      */
+                                                    scan_win,    /* UINT16 scan_win      */
+                                                    0x01,                   /* UINT8 white_list     */
+                                                    BLE_ADDR_PUBLIC,        /* UINT8 addr_type_peer */
+                                                    dummy_bda,              /* BD_ADDR bda_peer     */
+                                                    BLE_ADDR_PUBLIC,         /* UINT8 addr_type_own  */
+                                                    BTM_BLE_CONN_INT_MIN_DEF,   /* UINT16 conn_int_min  */
+                                                    BTM_BLE_CONN_INT_MAX_DEF,   /* UINT16 conn_int_max  */
+                                                    BTM_BLE_CONN_SLAVE_LATENCY_DEF,  /* UINT16 conn_latency  */
+                                                    BTM_BLE_CONN_TIMEOUT_DEF,        /* UINT16 conn_timeout  */
+                                                    0,                       /* UINT16 min_len       */
+                                                    0))                      /* UINT16 max_len       */
+                {
+                    /* start auto connection failed */
+                    exec =  FALSE;
+                }
+                else
+                {
+                    p_cb->bg_conn_state = BLE_BG_CONN_ACTIVE;
+                }
+            }
+        }
+        else
+            exec = FALSE;
+    }
+    else
+    {
+        if (p_cb->bg_conn_state == BLE_BG_CONN_ACTIVE)
+        {
+            if (!btsnd_hcic_ble_create_conn_cancel())
+                exec = FALSE;
+            else
+                p_cb->bg_conn_state = BLE_BG_CONN_IDLE;
+        }
+    }
+    return exec;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_start_select_conn
+**
+** Description      This function is to start/stop selective connection procedure.
+**
+** Parameters       start: TRUE to start; FALSE to stop.
+**                  p_select_cback: callback function to return application
+**                                  selection.
+**
+** Returns          BOOLEAN: selective connectino procedure is started.
+**
+*******************************************************************************/
+BOOLEAN btm_ble_start_select_conn(BOOLEAN start,tBTM_BLE_SEL_CBACK   *p_select_cback)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    UINT16 scan_int, scan_win;
+
+    BTM_TRACE_EVENT0 ("btm_ble_start_select_conn");
+
+    scan_int = (p_cb->scan_int == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_CONN_EST_SCAN_INT : p_cb->scan_int;
+    scan_win = (p_cb->scan_win == BTM_BLE_CONN_PARAM_UNDEF) ? BTM_BLE_CONN_EST_SCAN_WIND : p_cb->scan_win;
+
+    if (start)
+    {
+        if (!btm_cb.btm_inq_vars.inq_active)
+        {
+            btm_cb.ble_ctr_cb.p_select_cback = p_select_cback;
+
+            btm_update_scanner_filter_policy(SP_ADV_WL);
+
+            if (!btsnd_hcic_ble_set_scan_params(BTM_BLE_SCAN_MODE_PASS,  /* use passive scan by default */
+                                                scan_int, /* scan interval */
+                                                scan_win,    /* scan window */
+                                                BLE_ADDR_PUBLIC,         /* own device, DUMO always use public */
+                                                SP_ADV_WL)              /* process advertising packets only from devices in the White List */
+                )
+                return FALSE;
+
+            if (p_cb->inq_var.adv_mode == BTM_BLE_ADV_ENABLE)
+            {
+                BTM_TRACE_ERROR0("peripheral device cannot initiate a selective connection");
+                return FALSE;
+            }
+            else if (p_cb->bg_conn_dev_num > 0 && btm_ble_count_unconn_dev_in_whitelist() > 0 )
+            {
+
+                if (!btsnd_hcic_ble_set_scan_enable(TRUE, TRUE)) /* duplicate filtering enabled */
+                    return FALSE;
+
+                /* mark up inquiry status flag */
+                btm_cb.btm_inq_vars.inq_active = TRUE;
+                btm_cb.ble_ctr_cb.inq_var.proc_mode = BTM_BLE_SELECT_SCAN;
+
+                p_cb->bg_conn_state = BLE_BG_CONN_ACTIVE;
+
+            }
+        }
+        else
+        {
+            BTM_TRACE_ERROR0("scan active, can not start selective connection procedure");
+            return FALSE;
+        }
+    }
+    else /* disable selective connection mode */
+    {
+        p_cb->p_select_cback = NULL;
+        btm_cb.btm_inq_vars.inq_active = FALSE;
+        btm_cb.ble_ctr_cb.inq_var.proc_mode = BTM_BLE_INQUIRY_NONE;
+
+        btm_update_scanner_filter_policy(SP_ADV_ALL);
+
+        /* stop scanning */
+        if (p_cb->bg_conn_dev_num > 0)
+        {
+            if (!btsnd_hcic_ble_set_scan_enable(FALSE, TRUE)) /* duplicate filtering enabled */
+                return FALSE;
+        }
+    }
+    return TRUE;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_initiate_select_conn
+**
+** Description      This function is to start/stop selective connection procedure.
+**
+** Parameters       start: TRUE to start; FALSE to stop.
+**                  p_select_cback: callback function to return application
+**                                  selection.
+**
+** Returns          BOOLEAN: selective connectino procedure is started.
+**
+*******************************************************************************/
+void btm_ble_initiate_select_conn(BD_ADDR bda)
+{
+    UINT8   addr_type;
+    BTM_TRACE_EVENT0 ("btm_ble_initiate_select_conn");
+    addr_type = btm_ble_map_bda_to_conn_bda(bda);
+
+    /* use direct connection procedure to initiate connection */
+    if (!L2CA_ConnectFixedChnl(L2CAP_ATT_CID, bda))
+    {
+        BTM_TRACE_ERROR0("btm_ble_initiate_select_conn failed");
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_suspend_bg_sele_conn
+**
+** Description      This function is to suspend an active background connection
+**                  procedure.
+**
+** Parameters       none.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void btm_ble_suspend_bg_sele_conn(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BTM_TRACE_EVENT0 ("btm_ble_suspend_bg_sele_conn");
+
+    if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+    {
+        p_cb->bg_conn_state = BLE_BG_CONN_SUSPEND;
+        btm_ble_start_select_conn(FALSE, NULL);
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_suspend_bg_conn
+**
+** Description      This function is to suspend an active background connection
+**                  procedure.
+**
+** Parameters       none.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void btm_ble_suspend_bg_conn(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BTM_TRACE_EVENT0 ("btm_ble_suspend_bg_conn");
+
+    if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
+    {
+        if (btm_ble_start_auto_conn(FALSE))
+            p_cb->bg_conn_state = BLE_BG_CONN_SUSPEND;
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_scan_param_idle
+**
+** Description      This function is to process the scan parameter idle timeout
+**                  timeout.
+********************************************************************************/
+void btm_ble_scan_param_idle(void)
+{
+    BTM_BleSetConnScanParams(BTM_BLE_CONN_EST_SCAN_INT_LO, BTM_BLE_CONN_EST_SCAN_WIND_LO);
+}
+/*******************************************************************************
+**
+** Function         btm_ble_resume_bg_conn
+**
+** Description      This function is to resume a background auto connection
+**                  procedure.
+**
+** Parameters       none.
+**
+** Returns          none.
+**
+*******************************************************************************/
+BOOLEAN btm_ble_resume_bg_conn(tBTM_BLE_SEL_CBACK *p_sele_callback, BOOLEAN def_param)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BOOLEAN ret = FALSE;
+
+    if (p_cb->bg_conn_state != BLE_BG_CONN_ACTIVE )
+    {
+        if (def_param)
+        {
+            p_cb->scan_int = BTM_BLE_CONN_PARAM_UNDEF;
+            p_cb->scan_win = BTM_BLE_CONN_PARAM_UNDEF;
+
+            /* start scan param idle timer */
+            btu_start_timer(&p_cb->scan_param_idle_timer,
+                            BTU_TTYPE_BLE_SCAN_PARAM_IDLE,
+                            BTM_BLE_SCAN_PARAM_TOUT);
+        }
+
+        if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
+            ret = btm_ble_start_auto_conn(TRUE);
+
+        if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+        {
+            /* terminate selective connection mode if all devices are connected */
+            if (btm_ble_count_unconn_dev_in_whitelist() == 0)
+            {
+                btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_DISABLE, BTM_BLE_DUPLICATE_DISABLE);
+                btm_cb.ble_ctr_cb.inq_var.proc_mode = BTM_BLE_INQUIRY_NONE;
+                btm_cb.btm_inq_vars.inq_active = FALSE;
+            }
+            else if (!btm_cb.btm_inq_vars.inq_active)
+                btm_ble_start_select_conn(TRUE, btm_cb.ble_ctr_cb.p_select_cback);
+        }
+
+        if (ret)
+            p_cb->bg_conn_state = BLE_BG_CONN_ACTIVE;
+
+    }
+
+    return ret;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_update_bg_state
+**
+** Description      This function is to update the bg connection status.
+**
+** Parameters       none.
+**
+** Returns          none.
+**
+*******************************************************************************/
+void btm_ble_update_bg_state(void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+
+    if (!l2cb.is_ble_connecting && (p_cb->bg_conn_state != BLE_BG_CONN_SUSPEND))
+        p_cb->bg_conn_state = BLE_BG_CONN_IDLE;
+
+}
+
+#endif
+
diff --git a/stack/btm/btm_ble_gap.c b/stack/btm/btm_ble_gap.c
new file mode 100644
index 0000000..b9e17c0
--- /dev/null
+++ b/stack/btm/btm_ble_gap.c
@@ -0,0 +1,2084 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for BLE GAP.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+
+#include "bt_types.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "hcimsgs.h"
+#if (GAP_INCLUDED == TRUE)
+#include "gap_api.h"
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+#define BTM_BLE_NAME_SHORT                  0x01
+#define BTM_BLE_NAME_CMPL                   0x02
+
+#define BTM_BLE_FILTER_TARGET_UNKNOWN       0xff
+#define BTM_BLE_POLICY_UNKNOWN              0xff
+
+#define BLE_RESOLVE_ADDR_MSB                 0x40   /*  most significant bit, bit7, bit6 is 01 to be resolvable random */
+#define BLE_RESOLVE_ADDR_MASK                0xc0   /* bit 6, and bit7 */
+#define BTM_BLE_IS_RESOLVE_BDA(x)           ((x[0] & BLE_RESOLVE_ADDR_MASK) == BLE_RESOLVE_ADDR_MSB)
+
+#define BTM_EXT_BLE_RMT_NAME_TIMEOUT        30
+static tBLE_BD_ADDR le_bda_any ={BLE_ADDR_PUBLIC, {0x00,0x00,0x00,0x00,0x00,0x00}};
+
+
+#define BTM_BLE_VALID_CONN_DIRECT(x) (memcmp(&le_bda_any, x, sizeof(tBLE_BD_ADDR)) != 0)
+
+/*******************************************************************************
+**  Local functions
+*******************************************************************************/
+static void btm_ble_update_adv_flag(UINT8 flag);
+static void btm_ble_process_adv_pkt_cont(BD_ADDR bda, UINT8 addr_type, UINT8 evt_type, UINT8 *p);
+static UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst, tBTM_BLE_ADV_DATA *p_data);
+
+
+
+
+
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleReset
+**
+** Description      This function is called to reset ULP controller.
+**
+** Parameters       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleReset(void)
+{
+    btsnd_hcic_ble_reset();
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleObserve
+**
+** Description      This procedure keep the device listening for advertising
+**                  events from a broadcast device.
+**
+** Parameters       start: start or stop observe.
+**                  white_list: use white list in observer mode or not.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration,
+                           tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb)
+{
+    tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var;
+    tBTM_STATUS     status = BTM_NO_RESOURCES;
+
+    BTM_TRACE_EVENT0 ("BTM_BleObserve ");
+
+    if (start)
+    {
+        if (p_inq->proc_mode != BTM_BLE_INQUIRY_NONE)
+            return BTM_BUSY;
+
+        btm_cb.btm_inq_vars.p_inq_results_cb = p_results_cb;
+        btm_cb.btm_inq_vars.p_inq_cmpl_cb = p_cmpl_cb;
+
+        /* allow config scanning type */
+        if (btsnd_hcic_ble_set_scan_params ((UINT8)((p_inq->scan_type == BTM_BLE_SCAN_MODE_NONE) ? BTM_BLE_SCAN_MODE_ACTI: p_inq->scan_type),
+                                            (UINT16)(!p_inq->scan_interval ? BTM_BLE_GAP_DISC_SCAN_INT : p_inq->scan_interval),
+                                            (UINT16)(!p_inq->scan_window ? BTM_BLE_GAP_DISC_SCAN_WIN : p_inq->scan_window),
+                                            BLE_ADDR_PUBLIC,
+                                            BTM_BLE_DEFAULT_SFP)) /* assume observe always not using white list */
+        {
+            /* start scan, disable duplicate filtering */
+            if (btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_ENABLE, BTM_BLE_DUPLICATE_DISABLE))
+            {
+                status = BTM_SUCCESS;
+                p_inq->proc_mode = BTM_BLE_OBSERVE;
+                btm_cb.btm_inq_vars.inq_active = TRUE;
+
+                if (duration != 0)
+                {
+                    /* start inquiry timer */
+                    btu_start_timer (&p_inq->inq_timer_ent, BTU_TTYPE_BLE_INQUIRY, duration);
+                }
+            }
+        }
+    }
+    else if (p_inq->proc_mode == BTM_BLE_OBSERVE)
+    {
+        btm_ble_stop_scan();
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleBroadcast
+**
+** Description      This function is to start or stop broadcasting.
+**
+** Parameters       start: start or stop broadcasting.
+**
+** Returns          status.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleBroadcast(BOOLEAN start)
+{
+    tBTM_STATUS status = BTM_NO_RESOURCES;
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    UINT8 evt_type = p_cb->scan_rsp ? BTM_BLE_DISCOVER_EVT: BTM_BLE_NON_CONNECT_EVT;
+
+#ifdef  BTM_BLE_PC_ADV_TEST_MODE
+    if (BTM_BLE_PC_ADV_TEST_MODE)
+    {
+        evt_type = p_cb->scan_rsp ? BTM_BLE_CONNECT_EVT: BTM_BLE_NON_CONNECT_EVT;
+    }
+#endif
+
+    if (start && p_cb->adv_mode == BTM_BLE_ADV_DISABLE)
+    {
+        /* update adv params */
+        if (!btsnd_hcic_ble_write_adv_params ((UINT16)(p_cb->adv_interval_min ? p_cb->adv_interval_min : BTM_BLE_GAP_ADV_INT),
+                                              (UINT16)(p_cb->adv_interval_max ? p_cb->adv_interval_max : BTM_BLE_GAP_ADV_INT),
+                                              evt_type,
+                                              p_cb->own_addr_type,
+                                              p_cb->direct_bda.type, p_cb->direct_bda.bda,
+                                              p_cb->adv_chnl_map,
+                                              p_cb->afp))
+
+            status = BTM_NO_RESOURCES;
+        else
+            p_cb->evt_type = evt_type;
+
+        if (btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_ENABLE))
+        {
+            p_cb->adv_mode = BTM_BLE_ADV_ENABLE;
+
+            status = BTM_SUCCESS;
+        }
+    }
+    else if (!start && p_cb->adv_mode == BTM_BLE_ADV_ENABLE)
+    {
+        if (btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE))
+        {
+            p_cb->adv_mode = BTM_BLE_ADV_DISABLE;
+
+            status = BTM_SUCCESS;
+        }
+    }
+    else
+    {
+        status = BTM_WRONG_MODE;
+        BTM_TRACE_ERROR2("Can not %s Broadcast, device %s in Broadcast mode",
+            (start ? "Start" : "Stop"), (start ? "alerady" :"not"));
+    }
+
+    return status;
+}
+
+
+
+
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterScanReqEvt
+**
+** Description      This function is called to register a scan request callback
+**                  on the advertiser.
+**
+** Parameters       p_scan_req_cback: scan request callback.  If NULL, remove the
+**                                    registration.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK   *p_scan_req_cback)
+{
+#ifdef BTM_BLE_PC_ADV_TEST_MODE // For general stack code (e.g. BTInsight testing), we simply do not define it to exclude or set it to TRUE to include
+    if (BTM_BLE_PC_ADV_TEST_MODE)   // For stack component, it is always defined and maps to a global variable g_bDraculaAdvertisingMode
+    {
+        tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+        p_cb->p_scan_req_cback = p_scan_req_cback;
+    }
+#endif
+}
+/*******************************************************************************
+**
+** Function         BTM_BleConfigPrivacy
+**
+** Description      This function is called to enable or disable the privacy in
+**                  the local device.
+**
+** Parameters       enable: TRUE to enable it; FALSE to disable it.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleConfigPrivacy(BOOLEAN enable)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    BTM_TRACE_EVENT0 (" BTM_BleConfigPrivacy");
+    p_cb->privacy = enable;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetBgConnType
+**
+** Description      This function is called to set BLE connectable mode for a
+**                  peripheral device.
+**
+** Parameters       bg_conn_type: it can be auto connection, or selective connection.
+**                  p_select_cback: callback function when selective connection procedure
+**                              is being used.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE   bg_conn_type,
+                             tBTM_BLE_SEL_CBACK   *p_select_cback)
+{
+    BOOLEAN started = TRUE;
+
+    BTM_TRACE_EVENT0 ("BTM_BleSetBgConnType ");
+
+    if (btm_cb.ble_ctr_cb.bg_conn_type != bg_conn_type)
+    {
+        switch (bg_conn_type)
+        {
+            case BTM_BLE_CONN_AUTO:
+                btm_ble_start_auto_conn(TRUE);
+                break;
+
+            case BTM_BLE_CONN_SELECTIVE:
+                if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_AUTO)
+                {
+                    btm_ble_start_auto_conn(FALSE);
+                }
+                started = btm_ble_start_select_conn(TRUE, p_select_cback);
+                break;
+
+            case BTM_BLE_CONN_NONE:
+                if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_AUTO)
+                {
+                    btm_ble_start_auto_conn(FALSE);
+                }
+                else if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+                {
+                    btm_ble_start_select_conn(FALSE, NULL);
+                }
+                started = TRUE;
+                break;
+
+            default:
+                BTM_TRACE_ERROR1("invalid bg connection type : %d ", bg_conn_type);
+                started = FALSE;
+                break;
+        }
+
+        if (started)
+            btm_cb.ble_ctr_cb.bg_conn_type = bg_conn_type;
+    }
+    return started;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleUpdateBgConnDev
+**
+** Description      This function is called to add or remove a device into/from
+**                  background connection procedure. The background connection
+*                   procedure is decided by the background connection type, it can be
+*                   auto connection, or selective connection.
+**
+** Parameters       add_remove: TRUE to add; FALSE to remove.
+**                  remote_bda: device address to add/remove.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR   remote_bda)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+    tBTM_BLE_SEL_CBACK   *p_select_cback;
+    BOOLEAN ret = TRUE;
+
+    BTM_TRACE_EVENT0 (" BTM_BleUpdateBgConnDev");
+
+    /* if auto connection is active */
+    if (p_cb->bg_conn_state == BLE_BG_CONN_ACTIVE)
+    {
+        if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
+        {
+            /* terminate auto connection first */
+            ret = btm_ble_start_auto_conn(FALSE);
+        }
+        else if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+        {
+            p_select_cback = btm_cb.ble_ctr_cb.p_select_cback;
+            ret = btm_ble_start_select_conn(FALSE, NULL);
+        }
+    }
+    if (ret)
+    {
+        /* update white list */
+        ret = btm_update_bg_conn_list(add_remove, remote_bda);
+        btm_update_dev_to_white_list(add_remove, remote_bda, BLE_ADDR_PUBLIC);
+    }
+
+    if (ret && p_cb->bg_conn_state == BLE_BG_CONN_IDLE)
+    {
+        if (p_cb->bg_conn_type == BTM_BLE_CONN_AUTO)
+        {
+            /* restart auto connection */
+            btm_ble_start_auto_conn(TRUE);
+        }
+        else if (p_cb->bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+        {
+            p_select_cback = btm_cb.ble_ctr_cb.p_select_cback;
+            btm_ble_start_select_conn(TRUE, p_select_cback);
+        }
+    }
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetConnMode
+**
+** Description      This function is called to set BLE connectable mode for a
+**                  peripheral device.
+**
+** Parameters       directed: is directed connectable mode, or non-directed.
+**                  p_dir_bda: connectable direct initiator's LE device address
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleSetConnMode(BOOLEAN directed, tBLE_BD_ADDR *p_dir_bda)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    tBTM_STATUS status = BTM_SUCCESS;
+    BD_ADDR     reconn_bda;
+
+    BTM_TRACE_EVENT0 ("BTM_BleSetConnMode ");
+
+    memcpy(&p_cb->direct_bda, &le_bda_any, sizeof(tBLE_BD_ADDR));
+    p_cb->own_addr_type = BLE_ADDR_PUBLIC;
+
+    if (directed)
+    {
+        if (p_dir_bda)
+        {
+            memcpy(&p_cb->direct_bda, p_dir_bda, sizeof(tBLE_BD_ADDR));
+
+            if (btm_cb.ble_ctr_cb.privacy /* && GAP privacy ad reconnect addr exist */)
+            {
+                /* write reconnect address to controller*/
+                btsnd_hcic_ble_set_random_addr(reconn_bda);
+            }
+            /* else use static address or publich address */
+
+        }
+        else
+            status = BTM_ILLEGAL_VALUE;
+    }
+    else /* undirected connecatable */
+    {
+        if (btm_cb.ble_ctr_cb.privacy /* GAP privacy flag enabled */)
+        {
+            /* generate resolvable private address */
+            btm_gen_resolvable_private_addr();
+        } /* else use publich address */
+
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetAdvParams
+**
+** Description      This function is called to set advertising parameters.
+**
+** Parameters       adv_int_min: minimum advertising interval
+**                  adv_int_max: maximum advertising interval
+**                  p_dir_bda: connectable direct initiator's LE device address
+**                  chnl_map: advertising channel map.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max,
+                                tBLE_BD_ADDR *p_dir_bda,
+                                tBTM_BLE_ADV_CHNL_MAP chnl_map)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    tBTM_STATUS status = BTM_SUCCESS;
+
+    BTM_TRACE_EVENT0 ("BTM_BleSetAdvParams");
+
+    if (!BTM_BLE_VALID_PRAM(adv_int_min, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX) ||
+        !BTM_BLE_VALID_PRAM(adv_int_max, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX))
+    {
+        return BTM_ILLEGAL_VALUE;
+    }
+
+    p_cb->adv_interval_min = adv_int_min;
+    p_cb->adv_interval_max = adv_int_max;
+    p_cb->adv_chnl_map = chnl_map;
+
+    if (p_dir_bda)
+    {
+        memcpy(&p_cb->direct_bda, p_dir_bda, sizeof(tBLE_BD_ADDR));
+    }
+    else
+        memcpy(&p_cb->direct_bda, &le_bda_any, sizeof(tBLE_BD_ADDR));
+
+    if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE)
+    {
+        BTM_TRACE_EVENT0 ("update params for an active adv");
+
+        if (p_cb->connectable_mode == BTM_BLE_NON_CONNECTABLE)
+        {
+            if (BTM_BLE_VALID_CONN_DIRECT(&p_cb->direct_bda))
+                p_cb->evt_type = BTM_BLE_CONNECT_DIR_EVT;
+            else
+                p_cb->evt_type = BTM_BLE_CONNECT_EVT;
+
+            BTM_TRACE_DEBUG1(" evt_type = %d", p_cb->evt_type);
+        }
+
+        if (!btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE))
+            status = BTM_NO_RESOURCES;
+        else
+        /* update adv params */
+        if (!btsnd_hcic_ble_write_adv_params (p_cb->adv_interval_min,
+                                              p_cb->adv_interval_max,
+                                              p_cb->evt_type,
+                                              p_cb->own_addr_type,
+                                              p_cb->direct_bda.type,
+                                              p_cb->direct_bda.bda,
+                                              p_cb->adv_chnl_map,
+                                              p_cb->afp))
+
+            status = BTM_NO_RESOURCES;
+
+        else if (!btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_ENABLE))
+        {
+            p_cb->adv_mode = BTM_BLE_ADV_DISABLE;
+
+            status = BTM_NO_RESOURCES;
+        }
+
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleReadAdvParams
+**
+** Description      This function is called to set advertising parameters.
+**
+** Parameters       adv_int_min: minimum advertising interval
+**                  adv_int_max: maximum advertising interval
+**                  p_dir_bda: connectable direct initiator's LE device address
+**                  chnl_map: advertising channel map.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max,
+                           tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+
+    BTM_TRACE_EVENT0 ("BTM_BleReadAdvParams ");
+
+    *adv_int_min = p_cb->adv_interval_min;
+    *adv_int_max = p_cb->adv_interval_max;
+    *p_chnl_map = p_cb->adv_chnl_map;
+
+    if (p_dir_bda != NULL)
+    {
+        memcpy(p_dir_bda, &p_cb->direct_bda, sizeof(tBLE_BD_ADDR));
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetScanParams
+**
+** Description      This function is called to set Scan parameters.
+**
+** Parameters       adv_int_min: minimum advertising interval
+**                  adv_int_max: maximum advertising interval
+**                  p_dir_bda: connectable direct initiator's LE device address
+**                  chnl_map: advertising channel map.
+**                  scan_type: active scan or passive scan
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window, tBTM_BLE_SCAN_MODE scan_mode)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+
+    BTM_TRACE_EVENT0 (" BTM_BleSetScanParams");
+
+    if (BTM_BLE_VALID_PRAM(scan_interval, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
+        BTM_BLE_VALID_PRAM(scan_window, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX) &&
+        (scan_mode == BTM_BLE_SCAN_MODE_ACTI || scan_mode == BTM_BLE_SCAN_MODE_PASS))
+    {
+        p_cb->scan_type     = scan_mode;
+
+        if (BTM_BLE_CONN_PARAM_UNDEF != scan_interval)
+            p_cb->scan_interval = scan_interval;
+
+        if (BTM_BLE_CONN_PARAM_UNDEF != scan_window)
+            p_cb->scan_window   = scan_window;
+    }
+    else
+    {
+        BTM_TRACE_ERROR2("Illegal params: scan_interval = %d scan_window = %d",
+                        scan_interval, scan_window);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleWriteScanRsp
+**
+** Description      This function is called to write LE scan response.
+**
+** Parameters:      p_scan_rsp: scan response information.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data)
+{
+    tBTM_STATUS     status = BTM_NO_RESOURCES;
+    UINT8   rsp_data[BTM_BLE_AD_DATA_LEN],
+            *p = rsp_data;
+
+    BTM_TRACE_EVENT0 (" BTM_BleWriteScanRsp");
+    memset(rsp_data, 0, BTM_BLE_AD_DATA_LEN);
+    btm_ble_build_adv_data(&data_mask, &p, p_data);
+
+    if (btsnd_hcic_ble_set_scan_rsp_data((UINT8)(p - rsp_data), rsp_data))
+    {
+        status = BTM_SUCCESS;
+
+        if (p_data != NULL)
+            btm_cb.ble_ctr_cb.inq_var.scan_rsp = TRUE;
+        else
+            btm_cb.ble_ctr_cb.inq_var.scan_rsp = FALSE;
+    }
+    else
+        status = BTM_ILLEGAL_VALUE;
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BleWriteAdvData
+**
+** Description      This function is called to write advertising data.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK data_mask, tBTM_BLE_ADV_DATA *p_data)
+{
+    tBTM_BLE_LOCAL_ADV_DATA *p_cb_data = &btm_cb.ble_ctr_cb.inq_var.adv_data;
+    UINT8  *p;
+    UINT16   mask = data_mask;
+
+    memset(p_cb_data, 0, sizeof(tBTM_BLE_LOCAL_ADV_DATA));
+    p = p_cb_data->ad_data;
+    p_cb_data->data_mask = data_mask;
+
+    BTM_TRACE_EVENT0 ("BTM_BleWriteAdvData ");
+    p_cb_data->p_flags = btm_ble_build_adv_data(&mask, &p, p_data);
+
+    p_cb_data->p_pad = p;
+
+    if (data_mask != 0)
+    {
+        BTM_TRACE_ERROR0("Partial data write into ADV");
+    }
+
+    p_cb_data->data_mask &= ~mask;
+
+    if (btsnd_hcic_ble_set_adv_data((UINT8)(p_cb_data->p_pad - p_cb_data->ad_data),
+                                    p_cb_data->ad_data))
+        return BTM_SUCCESS;
+    else
+        return BTM_NO_RESOURCES;
+
+}
+
+/*******************************************************************************
+**
+** Function         BTM_CheckAdvData
+**
+** Description      This function is called to get ADV data for a specific type.
+**
+** Parameters       p_adv - pointer of ADV data
+**                  type   - finding ADV data type
+**                  p_length - return the length of ADV data not including type
+**
+** Returns          pointer of ADV data
+**
+*******************************************************************************/
+UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length)
+{
+    UINT8 *p = p_adv;
+    UINT8 length;
+    UINT8 adv_type;
+    BTM_TRACE_API1("BTM_CheckAdvData type=0x%02X", type);
+
+    STREAM_TO_UINT8(length, p);
+
+    while ( length && (p - p_adv <= BTM_BLE_CACHE_ADV_DATA_MAX))
+    {
+        STREAM_TO_UINT8(adv_type, p);
+
+        if ( adv_type == type )
+        {
+            /* length doesn't include itself */
+            *p_length = length - 1; /* minus the length of type */
+            return p;
+        }
+        p += length - 1; /* skip the length of data */
+        STREAM_TO_UINT8(length, p);
+    }
+
+    *p_length = 0;
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_build_adv_data
+**
+** Description      This function is called build the adv data and rsp data.
+*******************************************************************************/
+static UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst, tBTM_BLE_ADV_DATA *p_data)
+{
+    UINT16 data_mask = *p_data_mask;
+    UINT8   *p = *p_dst,
+    *p_flag = NULL;
+    UINT16  len = BTM_BLE_AD_DATA_LEN, cp_len = 0;
+    UINT8   i = 0;
+    tBTM_BLE_ATTR           *p_attr;
+    tBTM_BLE_PROP_ELEM      *p_elem;
+
+    BTM_TRACE_EVENT0 (" btm_ble_build_adv_data");
+
+    /* build the adv data structure and build the data string */
+    if (data_mask)
+    {
+        /* flags */
+        if (data_mask & BTM_BLE_AD_BIT_FLAGS)
+        {
+            *p++ = 2;
+            *p++ = BTM_BLE_AD_TYPE_FLAG;
+            p_flag = p;
+            if (p_data)
+                *p++ = p_data->flag;
+            else
+                *p++ = 0;
+
+            len -= 3;
+
+            data_mask &= ~BTM_BLE_AD_BIT_FLAGS;
+        }
+        /* device name */
+        if (len > 2 && data_mask & BTM_BLE_AD_BIT_DEV_NAME)
+        {
+            if (strlen(btm_cb.cfg.bd_name) > (UINT16)(len - 2))
+            {
+                *p++ = len - 2 + 1;
+                *p++ = BTM_BLE_AD_TYPE_NAME_SHORT;
+                ARRAY_TO_STREAM(p, btm_cb.cfg.bd_name, len - 2);
+            }
+            else
+            {
+                cp_len = (UINT16)strlen(btm_cb.cfg.bd_name);
+                *p++ = cp_len + 1;
+                *p++ = BTM_BLE_AD_TYPE_NAME_CMPL;
+                ARRAY_TO_STREAM(p, btm_cb.cfg.bd_name, cp_len);
+            }
+
+            len -= (cp_len + 2);
+            data_mask &= ~BTM_BLE_AD_BIT_DEV_NAME;
+        }
+        /* manufacturer data */
+        if (len > 2 && data_mask & BTM_BLE_AD_BIT_MANU &&
+            p_data && p_data->manu.len != 0 && p_data->manu.p_val)
+        {
+            if (p_data->manu.len > (len - 2))
+                cp_len = len - 2;
+            else
+                cp_len = p_data->manu.len;
+
+            *p++ = cp_len + 1;
+            *p++ = BTM_BLE_AD_TYPE_MANU;
+            ARRAY_TO_STREAM(p, p_data->manu.p_val, cp_len);
+
+            len -= (cp_len + 2);
+            data_mask &= ~BTM_BLE_AD_BIT_MANU;
+        }
+        /* TX power */
+        if (len > 2 && data_mask & BTM_BLE_AD_BIT_TX_PWR)
+        {
+            *p++ = 2;
+            *p++ = BTM_BLE_AD_TYPE_TX_PWR;
+            *p++ = btm_cb.ble_ctr_cb.inq_var.tx_power;
+            len -= 3;
+
+            data_mask &= ~BTM_BLE_AD_BIT_TX_PWR;
+        }
+        /* services */
+        if (len > 2 && data_mask & BTM_BLE_AD_BIT_SERVICE &&
+            p_data && p_data->services.num_service != 0 &&
+            p_data->services.p_uuid)
+        {
+            if (p_data->services.num_service * 2 > (len - 2))
+            {
+                cp_len = (len - 2)/2;
+                *p ++ = 1 + cp_len * 2;
+                *p++ = BTM_BLE_AD_TYPE_SRV_PART;
+            }
+            else
+            {
+                cp_len = p_data->services.num_service;
+                *p++ = 1 + cp_len * 2;
+                *p++ = BTM_BLE_AD_TYPE_SRV_CMPL;
+            }
+            for (i = 0; i < cp_len; i ++)
+            {
+                UINT16_TO_STREAM(p, *(p_data->services.p_uuid + i));
+            }
+
+            len -= (cp_len * 2 + 2);
+            data_mask &= ~BTM_BLE_AD_BIT_SERVICE;
+        }
+        if (len >= 6 && data_mask & BTM_BLE_AD_BIT_INT_RANGE &&
+            p_data)
+        {
+            *p++ = 5;
+            *p++ = BTM_BLE_AD_TYPE_INT_RANGE;
+            UINT16_TO_STREAM(p, p_data->int_range.low);
+            UINT16_TO_STREAM(p, p_data->int_range.hi);
+            len -= 6;
+            data_mask &= ~BTM_BLE_AD_BIT_INT_RANGE;
+        }
+        if (data_mask & BTM_BLE_AD_BIT_ATTR && p_data && p_data->attr.num_attr != 0)
+        {
+            for (i = 0; i < p_data->attr.num_attr ; i ++)
+            {
+                p_attr = p_data->attr.attr_list + i;
+
+                if (len >= (2 + 2 + p_attr->data_len))/* len byte(1) + ATTR type(1) + Uuid len(2) + value length */
+                {
+                    *p ++ = p_attr->data_len + 2 + 1; /* Uuid len + value length */
+                    *p ++ = BTM_BLE_AD_TYPE_ATTR;
+                    UINT16_TO_STREAM(p, p_attr->uuid);
+                    ARRAY_TO_STREAM(p, p_attr->p_data, p_attr->data_len);
+
+                    len -= (4 + p_attr->data_len);
+                }
+                else
+                    break;
+            }
+            if (i == p_data->attr.num_attr)
+                data_mask &= ~BTM_BLE_AD_BIT_ATTR;
+        }
+        if (data_mask & BTM_BLE_AD_BIT_PROPRIETARY && p_data && p_data->p_proprietary)
+        {
+            for (i = 0; i < p_data->p_proprietary->num_elem ; i ++)
+            {
+                p_elem = p_data->p_proprietary->p_elem  + i;
+
+                if (len >= (2 + p_elem->len))/* len byte(1) + ATTR type(1) + Uuid len(2) + value length */
+                {
+                    *p ++ = p_elem->len + 1; /* Uuid len + value length */
+                    *p ++ = p_elem->adv_type;
+                    ARRAY_TO_STREAM(p, p_elem->p_val, p_elem->len);
+
+                    len -= (2 + p_elem->len);
+                }
+                else
+                {
+                    BTM_TRACE_WARNING0("data exceed max adv packet length");
+                    break;
+                }
+            }
+            data_mask &= ~BTM_BLE_AD_BIT_PROPRIETARY;
+        }
+    }
+
+    *p_data_mask = data_mask;
+    *p_dst = p;
+
+    return p_flag;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_set_discoverability
+**
+** Description      This function is called to set BLE discoverable mode.
+**
+** Parameters:      mode: discoverability mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode)
+{
+    tBTM_BLE_INQ_CB     *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    UINT16              mode = (combined_mode &  BTM_BLE_DISCOVERABLE_MASK);
+    UINT8               flag = 0;
+    UINT8               new_mode = BTM_BLE_ADV_ENABLE;
+    UINT8               evt_type = (p_cb->connectable_mode == BTM_BLE_NON_CONNECTABLE) ? \
+                                   ((p_cb->scan_rsp) ? BTM_BLE_DISCOVER_EVT : BTM_BLE_NON_CONNECT_EVT )\
+                                   : BTM_BLE_CONNECT_EVT;
+    tBTM_STATUS         status = BTM_SUCCESS;
+
+    BTM_TRACE_EVENT2 ("btm_ble_set_discoverability mode=0x%0x combined_mode=0x%x", mode, combined_mode);
+
+    /*** Check mode parameter ***/
+    if (mode > BTM_BLE_MAX_DISCOVERABLE)
+        return(BTM_ILLEGAL_VALUE);
+
+    p_cb->br_edr_supported_flag |= (combined_mode & BTM_DISCOVERABLE_MASK);
+    p_cb->discoverable_mode = mode;
+
+    if (!p_cb->br_edr_supported_flag)
+    {
+        flag = BTM_BLE_BREDR_NOT_SPT;
+        BTM_TRACE_DEBUG1("btm_ble_set_discoverability (BREDR not sup)flag=0x%x",flag);
+    }
+
+    BTM_TRACE_DEBUG1 ("br_edr_supported=0x%x", p_cb->br_edr_supported_flag);
+
+    if (mode == BTM_BLE_LIMITED_DISCOVERABLE || mode == BTM_BLE_GENERAL_DISCOVERABLE)
+    {
+        BTM_TRACE_EVENT0 ("mode == BTM_BLE_LIMITED_DISCOVERABLE ");
+        /* write ADV data with limited disc flag */
+        if (mode == BTM_BLE_LIMITED_DISCOVERABLE)
+            flag |= BTM_BLE_LIMIT_DISC_FLAG ;
+        else
+            flag |= BTM_BLE_GEN_DISC_FLAG;
+    }
+    else  /* non-discoverable */
+    {
+        BTM_TRACE_EVENT0 ("mode == BTM_BLE_NON_DISCOVERABLE ");
+
+        if (p_cb->connectable_mode == BTM_BLE_NON_CONNECTABLE)
+        {
+            p_cb->br_edr_supported_flag = 0;
+
+            BTM_TRACE_EVENT0 ("always disable adv in non-discoverable non-connectable mode if no scan rsp ");
+            if (!p_cb->scan_rsp )
+	            new_mode = BTM_BLE_ADV_DISABLE;
+        }
+        else
+        {
+            if (BTM_BLE_VALID_CONN_DIRECT(&p_cb->direct_bda))
+            {
+                BTM_TRACE_DEBUG0("evt_type = BTM_BLE_CONNECT_DIR_EVT");
+                evt_type = BTM_BLE_CONNECT_DIR_EVT;
+            }
+            else
+            {
+                BTM_TRACE_DEBUG0(" evt_type = BTM_BLE_CONNECT_EVT");
+                evt_type = BTM_BLE_CONNECT_EVT;
+            }
+        }
+    }
+    btm_ble_update_adv_flag(flag);
+
+    /* update adv params if start advertising */
+    BTM_TRACE_EVENT2 ("evt_type=0x%x p-cb->evt_type=0x%x ", evt_type, p_cb->evt_type);
+    if (new_mode == BTM_BLE_ADV_ENABLE && evt_type != p_cb->evt_type)
+    {
+        if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE)
+        {
+            BTM_TRACE_EVENT0 ("Set Adv disable");
+            p_cb->adv_mode = BTM_BLE_ADV_DISABLE;
+            btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE);
+        }
+
+        /* update adv params */
+        if (!btsnd_hcic_ble_write_adv_params ((UINT16)(p_cb->adv_interval_min ? p_cb->adv_interval_min : BTM_BLE_GAP_ADV_INT),
+                                              (UINT16)(p_cb->adv_interval_max ? p_cb->adv_interval_max : BTM_BLE_GAP_ADV_INT),
+                                              evt_type,
+                                              p_cb->own_addr_type,
+                                              p_cb->direct_bda.type, p_cb->direct_bda.bda,
+                                              p_cb->adv_chnl_map,
+                                              p_cb->afp))
+
+            status = BTM_NO_RESOURCES;
+        else
+            p_cb->evt_type = evt_type;
+
+    }
+    if (status == BTM_SUCCESS && p_cb->adv_mode != new_mode)
+    {
+        /* update advertising mode */
+        if (!btsnd_hcic_ble_set_adv_enable (new_mode))
+            status = BTM_NO_RESOURCES;
+        else
+            p_cb->adv_mode = new_mode;
+    }
+
+    /* set up stop advertising timer */
+    if (status == BTM_SUCCESS && mode == BTM_BLE_LIMITED_DISCOVERABLE)
+    {
+        BTM_TRACE_EVENT1 ("start timer for limited disc mode duration=%d (30 secs)", BTM_BLE_GAP_LIM_TOUT);
+        /* start Tgap(lim_timeout) */
+        btu_start_timer (&p_cb->inq_timer_ent, BTU_TTYPE_BLE_GAP_LIM_DISC,
+                         BTM_BLE_GAP_LIM_TOUT);
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_set_connectability
+**
+** Description      This function is called to set BLE connectability mode.
+**
+** Parameters:      mode: connectability mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode)
+{
+    tBTM_BLE_INQ_CB         *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    UINT16                  mode = (combined_mode & BTM_BLE_CONNECTABLE_MASK);
+    UINT8                   cur_flag = 0;
+    UINT8                   cur_br_edr_not_sup_flag;
+    UINT8                   new_flag;
+    UINT8                   new_mode = BTM_BLE_ADV_ENABLE;
+    UINT8                   evt_type = (p_cb->scan_rsp) ? BTM_BLE_DISCOVER_EVT: BTM_BLE_NON_CONNECT_EVT;
+    tBTM_STATUS             status = BTM_SUCCESS;
+
+    BTM_TRACE_EVENT2 ("btm_ble_set_connectability mode=0x%0x combined_mode=0x%x", mode, combined_mode);
+
+    /*** Check mode parameter ***/
+    if (mode > BTM_BLE_MAX_CONNECTABLE)
+        return(BTM_ILLEGAL_VALUE);
+    if (btm_cb.ble_ctr_cb.inq_var.adv_data.p_flags)
+        cur_flag = *btm_cb.ble_ctr_cb.inq_var.adv_data.p_flags ;
+    cur_br_edr_not_sup_flag = (cur_flag & ((UINT8) BTM_BLE_BREDR_NOT_SPT));
+
+    p_cb->br_edr_supported_flag |= ((combined_mode & BTM_CONNECTABLE_MASK) << 4);
+    if (p_cb->br_edr_supported_flag && cur_br_edr_not_sup_flag)
+    {
+        new_flag = cur_flag & ((UINT8) (~BTM_BLE_BREDR_NOT_SPT));
+        BTM_TRACE_EVENT2 ("new flag=0x%x cur flag=0x%x",new_flag,  cur_flag);
+        btm_ble_update_adv_flag(new_flag);
+    }
+    p_cb->connectable_mode = mode;
+
+    if (mode == BTM_BLE_NON_CONNECTABLE)
+    {
+        if (p_cb->discoverable_mode == BTM_BLE_NON_DISCOVERABLE)
+        {
+            p_cb->br_edr_supported_flag = 0;
+            BTM_TRACE_EVENT0 ("always disable adv in non-discoverable non-connectable mode with no scan rsp");
+            if(!p_cb->scan_rsp)
+	            new_mode = BTM_BLE_ADV_DISABLE;
+        }
+    }
+    else /* connectable */
+    {
+        BTM_TRACE_DEBUG2("btm_ble_set_connectability: mode = %04x discoverable_mode= %02x", mode, p_cb->discoverable_mode);
+
+        if (BTM_BLE_VALID_CONN_DIRECT(&p_cb->direct_bda))
+        {
+            BTM_TRACE_DEBUG0("evt_type = BTM_BLE_CONNECT_DIR_EVT");
+            evt_type = BTM_BLE_CONNECT_DIR_EVT;
+        }
+        else
+        {
+            BTM_TRACE_DEBUG0(" evt_type = BTM_BLE_CONNECT_EVT");
+            evt_type = BTM_BLE_CONNECT_EVT;
+        }
+    }
+
+    /* update adv params if needed */
+    if (p_cb->evt_type != evt_type && new_mode == BTM_BLE_ADV_ENABLE)
+    {
+        if (p_cb->adv_mode == BTM_BLE_ADV_ENABLE)
+        {
+            p_cb->adv_mode = BTM_BLE_ADV_DISABLE;
+            btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE);
+        }
+
+        if (!btsnd_hcic_ble_write_adv_params ((UINT16)(p_cb->adv_interval_min ? p_cb->adv_interval_min : BTM_BLE_GAP_ADV_INT),
+                                              (UINT16)(p_cb->adv_interval_max ? p_cb->adv_interval_max : BTM_BLE_GAP_ADV_INT),
+                                              evt_type,
+                                              p_cb->own_addr_type,
+                                              p_cb->direct_bda.type,
+                                              p_cb->direct_bda.bda,
+                                              p_cb->adv_chnl_map,
+                                              p_cb->afp))
+            status = BTM_NO_RESOURCES;
+        else
+            p_cb->evt_type = evt_type;
+    }
+    /* update advertising mode */
+    if (status == BTM_SUCCESS && new_mode != p_cb->adv_mode)
+    {
+        if (btsnd_hcic_ble_set_adv_enable (new_mode))
+        {
+            status = BTM_SUCCESS;
+
+            p_cb->adv_mode = new_mode;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_start_inquiry
+**
+** Description      This function is called to start BLE inquiry procedure.
+**                  If the duration is zero, the periodic inquiry mode is cancelled.
+**
+** Parameters:      mode - GENERAL or LIMITED inquiry
+**                  p_inq_params - pointer to the BLE inquiry parameter.
+**                  p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS)
+**                  p_cmpl_cb - callback indicating the end of an inquiry
+**
+**
+**
+** Returns          BTM_CMD_STARTED if successfully started
+**                  BTM_ILLEGAL_VALUE if a bad parameter is detected
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_SUCCESS - if cancelling the periodic inquiry
+**                  BTM_BUSY - if an inquiry is already active
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8   duration)
+{
+    tBTM_STATUS status = BTM_NO_RESOURCES;
+    tBTM_BLE_INQ_CB *p_inq = &btm_cb.ble_ctr_cb.inq_var;
+
+    BTM_TRACE_DEBUG2("btm_ble_start_inquiry: mode = %02x inq_active = %d", mode, btm_cb.btm_inq_vars.inq_active);
+
+    if (p_inq->proc_mode != BTM_BLE_INQUIRY_NONE)
+    {
+        BTM_TRACE_ERROR0("LE scan is active, can not start inquiry");
+        return(BTM_BUSY);
+    }
+
+    btm_update_scanner_filter_policy(SP_ADV_ALL);
+
+    /* start scan, already enable duplicate filtering */
+    if (btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_ENABLE, BTM_BLE_DUPLICATE_DISABLE))
+    {
+        status = BTM_SUCCESS;
+        p_inq->proc_mode = mode;
+
+        if (duration != 0)
+        {
+            /* start inquiry timer */
+            btu_start_timer (&p_inq->inq_timer_ent, BTU_TTYPE_BLE_INQUIRY, duration);
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_read_remote_name_cmpl
+**
+** Description      This function is called when BLE remote name is received.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_read_remote_name_cmpl(BOOLEAN status, BD_ADDR bda, UINT16 length, char *p_name)
+{
+    UINT8   hci_status = HCI_SUCCESS;
+    BD_NAME bd_name;
+
+    memset(bd_name, 0, BD_NAME_LEN);
+    memcpy((UINT8*)bd_name, p_name, length);
+
+    if ((!status) || (length==0))
+    {
+        hci_status = HCI_ERR_HOST_TIMEOUT;
+    }
+
+    btm_process_remote_name(bda, bd_name, length, hci_status);
+    btm_sec_rmt_name_request_complete (bda, (UINT8 *)p_name, hci_status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_read_remote_name
+**
+** Description      This function read remote LE device name using GATT read
+**                  procedure.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb)
+{
+    tBTM_INQUIRY_VAR_ST      *p_inq = &btm_cb.btm_inq_vars;
+
+    if (p_cur &&
+        p_cur->results.ble_evt_type != BTM_BLE_EVT_CONN_ADV &&
+        p_cur->results.ble_evt_type != BTM_BLE_EVT_CONN_DIR_ADV)
+    {
+        BTM_TRACE_DEBUG0("name request to non-connectable device failed.");
+        return BTM_ERR_PROCESSING;
+    }
+
+    /* read remote device name using GATT procedure */
+    if (p_inq->remname_active)
+        return BTM_BUSY;
+
+    if (!GAP_BleReadPeerDevName(remote_bda, btm_ble_read_remote_name_cmpl))
+        return BTM_BUSY;
+
+    p_inq->p_remname_cmpl_cb = p_cb;
+    p_inq->remname_active = TRUE;
+
+    memcpy(p_inq->remname_bda, remote_bda, BD_ADDR_LEN);
+
+    btu_start_timer (&p_inq->rmt_name_timer_ent,
+                     BTU_TTYPE_BTM_RMT_NAME,
+                     BTM_EXT_BLE_RMT_NAME_TIMEOUT);
+
+    return BTM_CMD_STARTED;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_cancel_remote_name
+**
+** Description      This function cancel read remote LE device name.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda)
+{
+    tBTM_INQUIRY_VAR_ST      *p_inq = &btm_cb.btm_inq_vars;
+    BOOLEAN     status;
+
+    status = GAP_BleCancelReadPeerDevName(remote_bda);
+
+    p_inq->remname_active = FALSE;
+    memset(p_inq->remname_bda, 0, BD_ADDR_LEN);
+    btu_stop_timer(&p_inq->rmt_name_timer_ent);
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_update_adv_flag
+**
+** Description      This function update the limited discoverable flag in the adv
+**                  data.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_update_adv_flag(UINT8 flag)
+{
+    tBTM_BLE_LOCAL_ADV_DATA *p_adv_data = &btm_cb.ble_ctr_cb.inq_var.adv_data;
+    UINT8   *p;
+
+    BTM_TRACE_DEBUG1 ("btm_ble_update_adv_flag new=0x%x", flag);
+
+    if (p_adv_data->p_flags != NULL)
+    {
+        BTM_TRACE_DEBUG1 ("btm_ble_update_adv_flag old=0x%x",   *p_adv_data->p_flags);
+        *p_adv_data->p_flags = flag;
+    }
+    else /* no FLAGS in ADV data*/
+    {
+        p = (p_adv_data->p_pad == NULL) ? p_adv_data->ad_data : p_adv_data->p_pad;
+        /* need 3 bytes space to stuff in the flags, if not */
+        /* erase all written data, just for flags */
+        if ((BTM_BLE_AD_DATA_LEN - (p - p_adv_data->ad_data)) < 3)
+        {
+            p = p_adv_data->p_pad = p_adv_data->ad_data;
+            memset(p_adv_data->ad_data, 0, BTM_BLE_AD_DATA_LEN);
+        }
+
+        *p++ = 2;
+        *p++ = BTM_BLE_AD_TYPE_FLAG;
+        p_adv_data->p_flags = p;
+        *p++ = flag;
+        p_adv_data->p_pad = p;
+    }
+
+    if (btsnd_hcic_ble_set_adv_data((UINT8)(p_adv_data->p_pad - p_adv_data->ad_data),
+                                    p_adv_data->ad_data))
+        p_adv_data->data_mask |= BTM_BLE_AD_BIT_FLAGS;
+
+}
+
+#if 0
+/*******************************************************************************
+**
+** Function         btm_ble_parse_adv_data
+**
+** Description      This function parse the adv data into a structure.
+**
+** Returns          pointer to entry, or NULL if not found
+**
+*******************************************************************************/
+static void btm_ble_parse_adv_data(tBTM_INQ_INFO *p_info, UINT8 *p_data,
+                                   UINT8 len, tBTM_BLE_INQ_DATA *p_adv_data, UINT8 *p_buf)
+{
+    UINT8   *p_cur = p_data;
+    UINT8   ad_len, ad_type, ad_flag;
+    tBTM_BLE_ATTR   *p_attr;
+
+    BTM_TRACE_EVENT0 (" btm_ble_parse_adv_data");
+
+    while (len > 0)
+    {
+        BTM_TRACE_DEBUG1("btm_ble_parse_adv_data: len = %d", len);
+        if ((ad_len = *p_cur ++) == 0)
+            break;
+
+        ad_type = *p_cur ++;
+
+        BTM_TRACE_DEBUG2("     ad_type = %02x ad_len = %d", ad_type, ad_len);
+
+        switch (ad_type)
+        {
+            case BTM_BLE_AD_TYPE_NAME_SHORT:
+
+            case BTM_BLE_AD_TYPE_NAME_CMPL:
+                p_adv_data->ad_mask |= BTM_BLE_AD_BIT_DEV_NAME;
+                if (p_info)
+                {
+                    p_info->remote_name_type =(ad_type == BTM_BLE_AD_TYPE_NAME_SHORT) ?
+                                              BTM_BLE_NAME_SHORT: BTM_BLE_NAME_CMPL;
+                    memcpy(p_info->remote_name, p_cur, ad_len -1);
+                    p_info->remote_name[ad_len] = 0;
+                    p_adv_data->p_remote_name = p_info->remote_name;
+                    p_info->remote_name_len = p_adv_data->remote_name_len = ad_len - 1;
+                    BTM_TRACE_DEBUG1("BTM_BLE_AD_TYPE_NAME name = %s",p_adv_data->p_remote_name);
+                }
+                p_cur += (ad_len -1);
+
+                break;
+
+            case BTM_BLE_AD_TYPE_FLAG:
+                p_adv_data->ad_mask |= BTM_BLE_AD_BIT_FLAGS;
+                ad_flag = *p_cur ++;
+                p_adv_data->flag = (UINT8)(ad_flag & BTM_BLE_ADV_FLAG_MASK) ;
+                BTM_TRACE_DEBUG3("BTM_BLE_AD_TYPE_FLAG flag = %s | %s | %s",
+                                 (p_adv_data->flag & BTM_BLE_LIMIT_DISC_FLAG)? "LE_LIMIT_DISC" : "",
+                                 (p_adv_data->flag & BTM_BLE_GEN_DISC_FLAG)? "LE_GENERAL_DISC" : "",
+                                 (p_adv_data->flag & BTM_BLE_BREDR_NOT_SPT)? "LE Only device" : "");
+                break;
+
+            case BTM_BLE_AD_TYPE_TX_PWR:
+                p_adv_data->ad_mask |= BTM_BLE_AD_BIT_TX_PWR;
+                p_adv_data->tx_power_level = (INT8)*p_cur ++;
+                BTM_TRACE_DEBUG1("BTM_BLE_AD_TYPE_TX_PWR tx_level = %d", p_adv_data->tx_power_level);
+                break;
+
+            case BTM_BLE_AD_TYPE_ATTR:
+                p_adv_data->ad_mask |= BTM_BLE_AD_BIT_ATTR;
+                p_attr = &p_adv_data->attr_data.attr_list[p_adv_data->attr_data.num_attr];
+                p_attr->uuid = *p_cur ++;
+
+                if (ad_len > 3)
+                {
+                    p_attr->data_len = ad_len - 3;
+                    p_attr->p_data = p_buf;
+                    memcpy(p_attr->p_data, p_cur, p_attr->data_len);
+                    p_buf += p_attr->data_len;
+                }
+
+                p_adv_data->attr_data.num_attr ++;
+                BTM_TRACE_DEBUG2("BTM_BLE_AD_TYPE_ATTR[%d] uuid = 0x%04x",p_adv_data->attr_data.num_attr, p_attr->uuid);
+                break;
+
+            case BTM_BLE_AD_TYPE_MANU:
+
+            case BTM_BLE_AD_TYPE_SRV_CMPL:
+            case BTM_BLE_AD_TYPE_SRV_PART:
+                p_adv_data->ad_mask |= ad_type;
+                /* need allocate memory to store UUID list */
+                p_adv_data->service.num_service = (ad_len - 1)/2;
+                BTM_TRACE_DEBUG1("service UUID list, num = %d", p_adv_data->service.num_service);
+
+            default:
+                p_cur += (ad_len - 1);
+                break;
+        }
+        len -= (ad_len + 1);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         btm_ble_cache_adv_data
+**
+** Description      Update advertising cache data.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_cache_adv_data(tBTM_INQ_RESULTS *p_cur, UINT8 data_len, UINT8 *p, UINT8 evt_type)
+{
+    tBTM_BLE_INQ_CB     *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var;
+    UINT8 *p_cache;
+    UINT8 length;
+
+    /* cache adv report/scan response data */
+    if (evt_type != BTM_BLE_SCAN_RSP_EVT)
+    {
+        p_le_inq_cb->adv_len = 0;
+        memset(p_le_inq_cb->adv_data_cache, 0, BTM_BLE_CACHE_ADV_DATA_MAX);
+    }
+
+    if (data_len > 0)
+    {
+        p_cache = &p_le_inq_cb->adv_data_cache[p_le_inq_cb->adv_len];
+        STREAM_TO_UINT8(length, p);
+        while ( length && ((p_le_inq_cb->adv_len + length + 1) <= BTM_BLE_CACHE_ADV_DATA_MAX))
+        {
+            /* copy from the length byte & data into cache */
+            memcpy(p_cache, p-1, length+1);
+            /* advance the cache pointer past data */
+            p_cache += length+1;
+            /* increment cache length */
+            p_le_inq_cb->adv_len += length+1;
+            /* skip the length of data */
+            p += length;
+            STREAM_TO_UINT8(length, p);
+        }
+    }
+
+    /* parse service UUID from adv packet and save it in inq db eir_uuid */
+    /* TODO */
+}
+/*******************************************************************************
+**
+** Function         btm_ble_is_discoverable
+**
+** Description      check ADV flag to make sure device is discoverable and match
+**                  the search condition
+**
+** Parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_ble_is_discoverable(BD_ADDR bda, UINT8 evt_type, UINT8 *p)
+{
+    BOOLEAN             is_discoverable = FALSE;
+    UINT8               *p_flag, flag = 0;
+    UINT8                data_len;
+    tBTM_INQ_PARMS      *p_cond = &btm_cb.btm_inq_vars.inqparms;
+
+    STREAM_TO_UINT8    (data_len, p);
+
+    /* for observer, always "discoverable */
+    if (btm_cb.ble_ctr_cb.inq_var.proc_mode == BTM_BLE_OBSERVE ||
+        (btm_cb.ble_ctr_cb.inq_var.proc_mode == BTM_BLE_SELECT_SCAN &&
+        btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_SELECTIVE))
+        return TRUE;
+
+    /* does not match filter condition */
+    if (p_cond->filter_cond_type == BTM_FILTER_COND_BD_ADDR &&
+        memcmp(bda, p_cond->filter_cond.bdaddr_cond, BD_ADDR_LEN) != 0)
+    {
+        BTM_TRACE_DEBUG0("BD ADDR does not meet filter condition");
+        return FALSE;
+    }
+
+    /* scan response does not include the flag */
+    if (evt_type == BTM_BLE_SCAN_RSP_EVT)
+        return FALSE;
+
+    if (data_len > BTM_BLE_ADV_DATA_LEN_MAX)
+    {
+        BTM_TRACE_WARNING1("ADV data too long %d. discard", data_len);
+        return FALSE;
+    }
+
+    if (data_len != 0)
+    {
+        if ((p_flag = BTM_CheckAdvData(p, BTM_BLE_AD_TYPE_FLAG, &data_len)) != NULL)
+        {
+            flag = * p_flag;
+
+            if ((btm_cb.ble_ctr_cb.inq_var.proc_mode == BTM_BLE_GENERAL_INQUIRY) &&
+                (flag & (BTM_BLE_LIMIT_DISC_FLAG|BTM_BLE_GEN_DISC_FLAG)) != 0)
+            {
+                BTM_TRACE_DEBUG0("Find Generable Discoverable device");
+                is_discoverable = TRUE;
+            }
+
+            else if (btm_cb.ble_ctr_cb.inq_var.proc_mode == BTM_BLE_LIMITED_INQUIRY &&
+                     (flag & BTM_BLE_LIMIT_DISC_FLAG) != 0)
+            {
+                BTM_TRACE_DEBUG0("Find limited discoverable device");
+                is_discoverable = TRUE;
+            }
+
+        }
+    }
+
+    if (!is_discoverable)
+    {
+        BTM_TRACE_ERROR1("discoverable flag not desired: %d", flag);
+    }
+
+    return is_discoverable;
+}
+/*******************************************************************************
+**
+** Function         btm_ble_update_inq_result
+**
+** Description      Update adv packet information into inquiry result.
+**
+** Parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_ble_update_inq_result(tINQ_DB_ENT *p_i, UINT8 addr_type, UINT8 evt_type, UINT8 *p)
+{
+    BOOLEAN             to_report = TRUE;
+    tBTM_INQ_RESULTS     *p_cur = &p_i->inq_info.results;
+    UINT8               len;
+    UINT8               *p_flag;
+    tBTM_INQUIRY_VAR_ST  *p_inq = &btm_cb.btm_inq_vars;
+    UINT8                data_len, rssi;
+    tBTM_BLE_INQ_CB     *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var;
+    UINT8 *p1;
+
+    STREAM_TO_UINT8    (data_len, p);
+
+    if (data_len > BTM_BLE_ADV_DATA_LEN_MAX)
+    {
+        BTM_TRACE_WARNING1("EIR data too long %d. discard", data_len);
+        return FALSE;
+    }
+    btm_ble_cache_adv_data(p_cur, data_len, p, evt_type);
+
+    p1 = (p + data_len);
+    STREAM_TO_UINT8 (rssi, p1);
+
+    /* Save the info */
+    p_cur->inq_result_type = BTM_INQ_RESULT_BLE;
+    p_cur->ble_addr_type    = addr_type;
+    p_cur->rssi = rssi;
+
+    /* active scan, always wait until get scan_rsp to report the result */
+    if ((btm_cb.ble_ctr_cb.inq_var.scan_type == BTM_BLE_SCAN_MODE_ACTI &&
+         (evt_type == BTM_BLE_CONNECT_EVT || evt_type == BTM_BLE_DISCOVER_EVT)))
+    {
+        p_i->scan_rsp = FALSE;
+        to_report = FALSE;
+    }
+    else
+        p_i->scan_rsp = TRUE;
+
+    if (p_i->inq_count != p_inq->inq_counter)
+        p_cur->device_type = BT_DEVICE_TYPE_BLE;
+    else
+        p_cur->device_type |= BT_DEVICE_TYPE_BLE;
+
+    if (evt_type != BTM_BLE_SCAN_RSP_EVT)
+        p_cur->ble_evt_type     = evt_type;
+
+    p_i->inq_count = p_inq->inq_counter;   /* Mark entry for current inquiry */
+
+    if (p_le_inq_cb->adv_len != 0)
+    {
+        if ((p_flag = BTM_CheckAdvData(p_le_inq_cb->adv_data_cache, BTM_BLE_AD_TYPE_FLAG, &len)) != NULL)
+            p_cur->flag = * p_flag;
+    }
+
+    /* if BR/EDR not supported is not set, assume is a DUMO device */
+    if ((p_cur->flag & BTM_BLE_BREDR_NOT_SPT) == 0)
+    {
+        BTM_TRACE_ERROR0("BR/EDR NOT support bit not set, treat as DUMO");
+        p_cur->device_type |= BT_DEVICE_TYPE_DUMO;
+    }
+    else
+    {
+        BTM_TRACE_DEBUG0("BR/EDR NOT SUPPORT bit set, LE only device");
+    }
+
+    return to_report;
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_send_sel_conn_callback
+**
+** Description      send selection connection request callback.
+**
+** Parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_send_sel_conn_callback(BD_ADDR remote_bda, UINT8 evt_type, UINT8 *p_data, UINT8 addr_type)
+{
+    UINT8   data_len, len;
+    UINT8   *p_dev_name, remname[31] = {0};
+
+    if (btm_cb.ble_ctr_cb.p_select_cback == NULL ||
+        /* non-connectable device */
+        (evt_type != BTM_BLE_EVT_CONN_ADV && evt_type != BTM_BLE_EVT_CONN_DIR_ADV))
+        return;
+
+    STREAM_TO_UINT8    (data_len, p_data);
+
+    /* get the device name if exist in ADV data */
+    if (data_len != 0)
+    {
+        p_dev_name = BTM_CheckAdvData(p_data, BTM_BLE_AD_TYPE_NAME_CMPL, &len);
+
+        if (p_dev_name == NULL)
+            p_dev_name = BTM_CheckAdvData(p_data, BTM_BLE_AD_TYPE_NAME_SHORT, &len);
+
+        if (p_dev_name)
+            memcpy(remname, p_dev_name, len);
+    }
+    /* allow connection */
+    if ((* btm_cb.ble_ctr_cb.p_select_cback)(remote_bda, remname))
+    {
+        /* terminate selective connection, initiate connection */
+        btm_ble_initiate_select_conn(remote_bda);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_resolve_random_addr_cmpl
+**
+** Description      resolve random address complete callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_resolve_random_addr_cmpl(void * p_rec, void *p)
+{
+    tBTM_SEC_DEV_REC    *match_rec = (tBTM_SEC_DEV_REC *) p_rec;
+    UINT8       addr_type = BLE_ADDR_RANDOM;
+    BD_ADDR     bda;
+    UINT8       *pp = (UINT8 *)p + 1;
+    UINT8           evt_type;
+
+    BTM_TRACE_EVENT0 ("btm_ble_resolve_random_addr_cmpl ");
+
+    STREAM_TO_UINT8    (evt_type, pp);
+    STREAM_TO_UINT8    (addr_type, pp);
+    STREAM_TO_BDADDR   (bda, pp);
+
+    if (match_rec)
+    {
+        BTM_TRACE_ERROR0("Random match");
+        memcpy(match_rec->ble.cur_rand_addr, bda, BD_ADDR_LEN);
+        memcpy(bda, match_rec->bd_addr, BD_ADDR_LEN);
+    }
+    else
+    {
+        BTM_TRACE_ERROR0("Random unmatch");
+    }
+
+    btm_ble_process_adv_pkt_cont(bda, addr_type, evt_type, pp);
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_adv_pkt
+**
+** Description      This function is called when adv packet report events are
+**                  received from the device. It updates the inquiry database.
+**                  If the inquiry database is full, the oldest entry is discarded.
+**
+** Parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_process_adv_pkt (UINT8 *p_data)
+{
+    BD_ADDR             bda;
+    UINT8               evt_type = 0, *p = p_data;
+    UINT8               addr_type = 0;
+
+    BTM_TRACE_EVENT0 ("btm_ble_process_adv_pkt ");
+
+    /* always get one device at a time */
+    p ++;
+
+    /* Extract inquiry results */
+    STREAM_TO_UINT8    (evt_type, p);
+    STREAM_TO_UINT8    (addr_type, p);
+    STREAM_TO_BDADDR   (bda, p);
+
+#ifdef BTM_BLE_PC_ADV_TEST_MODE // For general stack code (e.g. BTInsight testing), we simply do not define it to exclude or set it to TRUE to include
+    if (BTM_BLE_PC_ADV_TEST_MODE)   // For stack component, it is always defined and maps to a global variable g_bDraculaAdvertisingMode
+    {
+        if (btm_cb.ble_ctr_cb.p_scan_req_cback)
+            (*btm_cb.ble_ctr_cb.p_scan_req_cback)(bda, addr_type, evt_type);
+    }
+#endif
+
+    /* Only process the results if the inquiry is still active */
+    if (!btm_cb.btm_inq_vars.inq_active &&
+        (btm_cb.ble_ctr_cb.bg_conn_type != BTM_BLE_CONN_SELECTIVE ||
+         /* or selective auto connection is active */
+         btm_cb.ble_ctr_cb.p_select_cback == NULL))
+        return;
+
+
+#if SMP_INCLUDED == TRUE
+    if (addr_type == BLE_ADDR_RANDOM && BTM_BLE_IS_RESOLVE_BDA(bda))
+    {
+        btm_ble_resolve_random_addr(bda, btm_ble_resolve_random_addr_cmpl, p_data);
+    }
+    else
+#endif
+        btm_ble_process_adv_pkt_cont(bda, addr_type, evt_type, p);
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_process_adv_pkt_cont
+**
+** Description      This function is called after random address resolution is
+**                  done, and proceed to process adv packet.
+**
+** Parameters
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_ble_process_adv_pkt_cont(BD_ADDR bda, UINT8 addr_type, UINT8 evt_type, UINT8 *p)
+{
+    tINQ_DB_ENT          *p_i;
+    BOOLEAN              to_report = FALSE;
+    tBTM_INQUIRY_VAR_ST  *p_inq = &btm_cb.btm_inq_vars;
+    tBTM_INQ_RESULTS_CB  *p_inq_results_cb = p_inq->p_inq_results_cb;
+    tBTM_BLE_INQ_CB      *p_le_inq_cb = &btm_cb.ble_ctr_cb.inq_var;
+
+    p_i = btm_inq_db_find (bda);
+
+    /* Check if this address has already been processed for this inquiry */
+    if (btm_inq_find_bdaddr(bda))
+    {
+        /* never been report as an LE device */
+        if ((p_i &&
+            (!(p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BLE) ||
+              /* scan repsonse to be updated */
+              (!p_i->scan_rsp)))
+            ||
+            btm_cb.ble_ctr_cb.inq_var.proc_mode == BTM_BLE_OBSERVE)
+        {
+            BTM_TRACE_DEBUG0("update new BLE information ");
+            to_report = TRUE;
+        }
+        else
+        {
+            BTM_TRACE_DEBUG0("LE in le_bd_db already");
+            /* if yes, skip it */
+            return; /* assumption: one result per event */
+        }
+    }
+    else /* not been processed int his round */
+    {
+        BTM_TRACE_DEBUG0("new LE BD_ADDR");
+        to_report = TRUE;
+    }
+
+    /* If existing entry, use that, else get  a new one (possibly reusing the oldest) */
+    if (p_i == NULL)
+    {
+        if (btm_ble_is_discoverable(bda, evt_type, p))
+        {
+            if ((p_i = btm_inq_db_new (bda)) != NULL)
+            {
+                p_inq->inq_cmpl_info.num_resp++;
+                BTM_TRACE_DEBUG0("adv pkt process:  new record is added into inq db");
+                to_report = TRUE;
+            }
+            else
+                return;
+        }
+        else
+        {
+            BTM_TRACE_ERROR0("discard adv pkt");
+            return;
+        }
+    }
+    else if (p_i->inq_count != p_inq->inq_counter) /* first time seen in this inquiry */
+    {
+        p_inq->inq_cmpl_info.num_resp++;
+    }
+
+    /* update the LE device information in inquiry database */
+    if (to_report)
+    {
+        to_report = btm_ble_update_inq_result(p_i, addr_type, evt_type, p);
+    }
+
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+    /* If the number of responses found and limited, issue a cancel inquiry */
+    if (p_inq->inqparms.max_resps &&
+        p_inq->inq_cmpl_info.num_resp == p_inq->inqparms.max_resps)
+    {
+        /* new device */
+        if (p_i == NULL ||
+            (/* assume a DUMO device, BR/EDR inquiry is always active */
+             p_i && p_i->inq_info.results.device_type == BT_DEVICE_TYPE_BLE && p_i->scan_rsp))
+        {
+            BTM_TRACE_WARNING0("INQ RES: Extra Response Received...cancelling inquiry..");
+
+            if (!(p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE) )
+                btsnd_hcic_inq_cancel();
+
+            /* stop LE scan now */
+            btm_ble_stop_scan();
+
+#if BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE
+            btm_acl_update_busy_level (BTM_BLI_INQ_DONE_EVT);
+#endif
+        }
+    }
+#endif
+
+    /* background connection in selective connection mode */
+    if (btm_cb.ble_ctr_cb.bg_conn_type == BTM_BLE_CONN_SELECTIVE)
+    {
+        btm_send_sel_conn_callback(bda, evt_type, p, addr_type);
+    }
+    else if (p_inq_results_cb && to_report)
+    {
+        BTM_TRACE_DEBUG0("BTMINQ LE: Found devices, send callback btm_inqrslt_cb");
+
+        if (p_inq->inq_active)
+            (p_inq_results_cb)((tBTM_INQ_RESULTS *) &p_i->inq_info.results, p_le_inq_cb->adv_data_cache);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_stop_scan
+**
+** Description      Stop the BLE scan.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_stop_scan(void)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    BTM_TRACE_EVENT0 ("btm_ble_stop_scan ");
+
+    btu_stop_timer (&p_cb->inq_timer_ent);
+
+    /* Clear the inquiry callback if set */
+    p_cb->scan_type = BTM_BLE_SCAN_MODE_NONE;
+    p_cb->proc_mode = BTM_BLE_INQUIRY_NONE;
+
+    /* stop discovery now */
+    btsnd_hcic_ble_set_scan_enable (BTM_BLE_SCAN_DISABLE, BTM_BLE_DUPLICATE_ENABLE);
+
+    /* If we have a callback registered for inquiry complete, call it */
+    BTM_TRACE_DEBUG2 ("BTM Inq Compl Callback: status 0x%02x, num results %d",
+                      p_inq->inq_cmpl_info.status, p_inq->inq_cmpl_info.num_resp);
+
+    btm_update_scanner_filter_policy(SP_ADV_ALL);
+
+    btm_process_inq_complete(HCI_SUCCESS, (UINT8)(p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK));
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_stop_adv
+**
+** Description      Stop the BLE advertising.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_stop_adv(void)
+{
+    BTM_TRACE_EVENT0 (" btm_ble_stop_adv");
+
+    if (btsnd_hcic_ble_set_adv_enable (BTM_BLE_ADV_DISABLE))
+    {
+        btm_cb.ble_ctr_cb.inq_var.adv_mode = BTM_BLE_ADV_DISABLE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_timeout
+**
+** Description      Called when BTM BLE inquiry timer expires
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_timeout(TIMER_LIST_ENT *p_tle)
+{
+    BTM_TRACE_EVENT0 ("btm_ble_timeout");
+
+    switch (p_tle->event)
+    {
+        case BTU_TTYPE_BLE_INQUIRY:
+            btm_ble_stop_scan();
+            break;
+
+        case BTU_TTYPE_BLE_GAP_LIM_DISC:
+            /* lim_timeout expiried, limited discovery should exit now */
+            btm_ble_update_adv_flag(BTM_BLE_NON_LIMIT_DISC_FLAG);
+
+            btm_ble_stop_adv();
+            break;
+
+        case BTU_TTYPE_BLE_RANDOM_ADDR:
+            if (btm_cb.ble_ctr_cb.inq_var.adv_mode == BTM_BLE_ADV_ENABLE &&
+                btm_cb.ble_ctr_cb.inq_var.own_addr_type == BLE_ADDR_RANDOM)
+            {
+                /* refresh the random addr */
+                btm_gen_resolvable_private_addr();
+            }
+            break;
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_connected
+**
+** Description      This function is when a LE connection to the peer device is
+**                  establsihed
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bda);
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+
+    BTM_TRACE_EVENT0 ("btm_ble_connected");
+
+    /* Commenting out trace due to obf/compilation problems.
+    */
+#if (BT_USE_TRACES == TRUE)
+    if (p_dev_rec)
+    {
+        BTM_TRACE_EVENT4 ("Security Manager: btm_sec_connected :  handle:%d  enc_mode:%d  bda:%x RName:%s",
+                          handle,  enc_mode,
+                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5],
+                          p_dev_rec->sec_bd_name);
+
+        BTM_TRACE_DEBUG1 ("btm_ble_connected sec_flags=0x%x",p_dev_rec->sec_flags);
+    }
+    else
+    {
+        BTM_TRACE_EVENT3 ("Security Manager: btm_sec_connected:   handle:%d  enc_mode:%d  bda:%x ",
+                          handle,  enc_mode,
+                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5]);
+    }
+#endif
+
+    if (!p_dev_rec)
+    {
+        /* There is no device record for new connection.  Allocate one */
+        p_dev_rec = btm_sec_alloc_dev (bda);
+    }
+    else    /* Update the timestamp for this device */
+    {
+        p_dev_rec->timestamp = btm_cb.dev_rec_count++;
+    }
+
+    p_dev_rec->device_type = BT_DEVICE_TYPE_BLE;
+    p_dev_rec->hci_handle = handle;
+    if (role == HCI_ROLE_MASTER)
+        p_dev_rec->role_master = TRUE;
+
+    p_cb->inq_var.adv_mode = BTM_BLE_ADV_DISABLE;
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_read_remote_features_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read LE remote feature supported
+**                  complete event.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_read_remote_features_complete(UINT8 *p)
+{
+    tACL_CONN        *p_acl_cb = &btm_cb.acl_db[0];
+    UINT8             size;
+    UINT16            handle;
+    int               xx, yy;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_EVENT0 ("btm_ble_read_remote_features_complete ");
+
+    STREAM_TO_UINT16  (handle, p);
+    STREAM_TO_UINT8  (size, p);
+
+    /* Look up the connection by handle and copy features */
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_acl_cb++)
+    {
+        if ((p_acl_cb->in_use) && (p_acl_cb->hci_handle == handle))
+        {
+            for (yy = 0; yy < BD_FEATURES_LEN; yy++)
+                STREAM_TO_UINT8 (p_acl_cb->features[yy], p);
+
+            p_dev_rec = btm_find_dev_by_handle (handle);
+            if (!p_dev_rec)
+            {
+                /* Get a new device; might be doing dedicated bonding */
+                p_dev_rec = btm_find_or_alloc_dev (p_acl_cb->remote_addr);
+            }
+
+            memcpy (p_dev_rec->features, p_acl_cb->features, BD_FEATURES_LEN);
+            break;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_ble_write_adv_enable_complete
+**
+** Description      This function process the write adv enable command complete.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_write_adv_enable_complete(UINT8 * p)
+{
+    tBTM_BLE_INQ_CB *p_cb = &btm_cb.ble_ctr_cb.inq_var;
+
+    /* if write adv enable/disbale not succeed */
+    if (*p != HCI_SUCCESS)
+    {
+        /* toggle back the adv mode */
+        p_cb->adv_mode = !p_cb->adv_mode;
+    }
+}
+/*******************************************************************************
+**
+** Function         btm_ble_init
+**
+** Description      Initialize the control block variable values.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_ble_init (void)
+{
+    tBTM_BLE_CB *p_cb = &btm_cb.ble_ctr_cb;
+
+    BTM_TRACE_EVENT0 ("btm_ble_init ");
+
+    memset(p_cb, 0, sizeof(tBTM_BLE_CB));
+
+    p_cb->inq_var.adv_mode = BTM_BLE_ADV_DISABLE;
+    p_cb->inq_var.scan_type = BTM_BLE_SCAN_MODE_NONE;
+    p_cb->inq_var.adv_chnl_map = BTM_BLE_DEFAULT_ADV_CHNL_MAP;
+    p_cb->inq_var.afp = BTM_BLE_DEFAULT_AFP;
+    p_cb->inq_var.sfp = BTM_BLE_DEFAULT_SFP;
+    p_cb->inq_var.connectable_mode = BTM_BLE_NON_CONNECTABLE;
+    p_cb->inq_var.discoverable_mode = BTM_BLE_NON_DISCOVERABLE;
+
+    /* for background connection, reset connection params to be undefined */
+    p_cb->scan_int = p_cb->scan_win = BTM_BLE_CONN_PARAM_UNDEF;
+
+    p_cb->inq_var.evt_type = BTM_BLE_UNKNOWN_EVT;
+}
+
+#endif  /* BLE_INCLUDED */
diff --git a/stack/btm/btm_ble_int.h b/stack/btm/btm_ble_int.h
new file mode 100644
index 0000000..449de8f
--- /dev/null
+++ b/stack/btm/btm_ble_int.h
@@ -0,0 +1,299 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main Bluetooth Manager (BTM) internal
+ *  definitions.
+ *
+ ******************************************************************************/
+
+#ifndef BTM_BLE_INT_H
+#define BTM_BLE_INT_H
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcidefs.h"
+#include "btm_ble_api.h"
+#include "btm_int.h"
+
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+#include "smp_api.h"
+#endif
+
+#define BTM_BLE_CONNECT_EVT     0x00
+#define BTM_BLE_CONNECT_DIR_EVT 0x01
+#define BTM_BLE_DISCOVER_EVT    0x02
+#define BTM_BLE_NON_CONNECT_EVT 0x03
+#define BTM_BLE_SCAN_RSP_EVT    0x04
+#define BTM_BLE_SCAN_REQ_EVT    0x06
+#define BTM_BLE_UNKNOWN_EVT     0xff
+
+#define BTM_BLE_UNKNOWN_EVT     0xff
+
+/* scanning enable status */
+#define BTM_BLE_SCAN_ENABLE      0x01
+#define BTM_BLE_SCAN_DISABLE     0x00
+
+/* advertising enable status */
+#define BTM_BLE_ADV_ENABLE     0x01
+#define BTM_BLE_ADV_DISABLE    0x00
+
+/* use the high 4 bits unused by inquiry mode */
+#define BTM_BLE_SELECT_SCAN     0x20
+#define BTM_BLE_NAME_REQUEST    0x40
+#define BTM_BLE_OBSERVE         0x80
+
+#define BTM_BLE_MAX_WL_ENTRY        1
+#define BTM_BLE_AD_DATA_LEN         31
+
+#define BTM_BLE_ENC_MASK    0x03
+
+#define BTM_BLE_DUPLICATE_ENABLE        1
+#define BTM_BLE_DUPLICATE_DISABLE       0
+
+#define BTM_BLE_GAP_DISC_SCAN_INT   18         /* Interval(scan_int) = 11.25 ms= 0x0010 * 0.625 ms */
+#define BTM_BLE_GAP_DISC_SCAN_WIN   18         /* scan_window = 11.25 ms= 0x0010 * 0.625 ms */
+#define BTM_BLE_GAP_ADV_INT         512         /* Tgap(gen_disc) = 1.28 s= 512 * 0.625 ms */
+#define BTM_BLE_GAP_LIM_TOUT        30          /* Tgap(lim_timeout) = 30.72 s max, round down to 30 */
+
+
+#define BTM_BLE_SEC_REQ_ACT_NONE           0
+#define BTM_BLE_SEC_REQ_ACT_ENCRYPT        1 /* encrypt the link using current key or key refresh */
+#define BTM_BLE_SEC_REQ_ACT_PAIR           2
+#define BTM_BLE_SEC_REQ_ACT_DISCARD        3 /* discard the sec request while encryption is started but not completed */
+typedef UINT8   tBTM_BLE_SEC_REQ_ACT;
+
+
+
+typedef struct
+{
+    UINT16              data_mask;
+    UINT8               *p_flags;
+    UINT8               ad_data[BTM_BLE_AD_DATA_LEN];
+    UINT8               *p_pad;
+}tBTM_BLE_LOCAL_ADV_DATA;
+
+typedef struct
+{
+    UINT32          inq_count;          /* Used for determining if a response has already been      */
+                                        /* received for the current inquiry operation. (We do not   */
+                                        /* want to flood the caller with multiple responses from    */
+                                        /* the same device.                                         */
+    BOOLEAN         scan_rsp;
+    tBLE_BD_ADDR    le_bda;
+} tINQ_LE_BDADDR;
+
+#define BTM_BLE_ADV_DATA_LEN_MAX        31
+#define BTM_BLE_CACHE_ADV_DATA_MAX      62
+
+#define BTM_BLE_VALID_PRAM(x, min, max)  (((x) >= (min) && (x) <= (max)) || ((x) == BTM_BLE_CONN_PARAM_UNDEF))
+
+typedef struct
+{
+
+    UINT16           discoverable_mode;
+    UINT16           connectable_mode;
+    UINT16           br_edr_supported_flag;  /* combined BR EDR discoverable and connectable mode */
+                                             /* only meaningful when it is zero. This means
+                                                BR EDR is not supported*/
+    UINT8            proc_mode;        /* current procedure mode : inquiry or discovery */
+
+    UINT16           scan_window;
+    UINT16           scan_interval;
+    UINT8            scan_type;        /* current scan type: active or passive */
+    UINT16           adv_interval_min;
+    UINT16           adv_interval_max;
+    tBLE_ADDR_TYPE	 own_addr_type;
+    tBTM_BLE_AFP     afp;               /* advertising filter policy */
+    tBTM_BLE_SFP     sfp;               /* scanning filter policy */
+
+    UINT8            evt_type;
+    UINT8            adv_mode;
+    tBLE_BD_ADDR     direct_bda;
+
+    UINT8            adv_len;
+    UINT8            adv_data_cache[BTM_BLE_CACHE_ADV_DATA_MAX];
+
+    /* inquiry BD addr database */
+    UINT8               num_bd_entries;
+    UINT8               max_bd_entries;
+
+    tBLE_BD_ADDR        local_bda;
+
+    tBTM_BLE_LOCAL_ADV_DATA   adv_data;
+    tBTM_BLE_ADV_CHNL_MAP     adv_chnl_map;
+
+    TIMER_LIST_ENT   inq_timer_ent;
+    BOOLEAN          scan_rsp;
+    UINT8            state;             /* Current state that the inquiry process is in */
+    UINT8           tx_power;
+} tBTM_BLE_INQ_CB;
+
+
+/* random address resolving complete callback */
+typedef void (tBTM_BLE_RESOLVE_CBACK) (void * match_rec, void *p);
+
+/* random address management control block */
+typedef struct
+{
+    BD_ADDR			            private_addr;
+    BD_ADDR                     random_bda;
+    BOOLEAN                     busy;
+    UINT16                       index;
+    tBTM_BLE_RESOLVE_CBACK      *p_resolve_cback;
+    void                        *p;
+    TIMER_LIST_ENT              raddr_timer_ent;
+} tBTM_LE_RANDOM_CB;
+
+#define BTM_BLE_MAX_BG_CONN_DEV_NUM    10
+
+typedef struct
+{
+    UINT16              min_conn_int;
+    UINT16              max_conn_int;
+    UINT16              slave_latency;
+    UINT16              supervision_tout;
+
+}tBTM_LE_CONN_PRAMS;
+
+/* Define BLE Device Management control structure
+*/
+typedef struct
+{
+    /*****************************************************
+    **      BLE Inquiry
+    *****************************************************/
+    tBTM_BLE_INQ_CB     inq_var;
+
+    /* background connection procedure cb value */
+    tBTM_BLE_CONN_TYPE  bg_conn_type;
+    UINT16              scan_int;
+    UINT16              scan_win;
+    tBTM_BLE_SEL_CBACK  *p_select_cback;
+    TIMER_LIST_ENT      scan_param_idle_timer;
+
+    UINT8               bg_conn_dev_num;
+    BD_ADDR             bg_conn_dev_list[BTM_BLE_MAX_BG_CONN_DEV_NUM];
+
+#define BLE_BG_CONN_IDLE    0
+#define BLE_BG_CONN_ACTIVE  1
+#define BLE_BG_CONN_SUSPEND 2
+
+    UINT8               bg_conn_state;
+
+    /* random address management control block */
+    tBTM_LE_RANDOM_CB   addr_mgnt_cb;
+
+    /* white list information */
+    UINT8            num_empty_filter;      /* Number of entries in white list */
+    UINT8            max_filter_entries;    /* Maximum number of entries that can be stored */
+    BOOLEAN          enabled;
+    BOOLEAN          privacy;               /* privacy enabled or disabled */
+
+#ifdef BTM_BLE_PC_ADV_TEST_MODE
+    tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback;
+#endif
+
+} tBTM_BLE_CB;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void btm_ble_timeout(TIMER_LIST_ENT *p_tle);
+extern void btm_ble_process_adv_pkt (UINT8 *p);
+extern void btm_ble_proc_scan_rsp_rpt (UINT8 *p);
+extern tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb);
+extern BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda);
+
+extern tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode);
+extern tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode);
+extern tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8   duration);
+
+extern void btm_ble_stop_scan(void);
+extern void btm_ble_att_db_init(void);
+extern void btm_ble_init (void);
+extern void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role);
+extern void btm_ble_read_remote_features_complete(UINT8 *p);
+extern void btm_ble_stop_adv(void);
+extern void btm_ble_write_adv_enable_complete(UINT8 * p);
+
+/* LE security function from btm_sec.c */
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+extern void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act);
+extern void btm_ble_ltk_request_reply(BD_ADDR bda,  BOOLEAN use_stk, BT_OCTET16 stk);
+extern UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data);
+extern tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, void *p_ref_data, UINT8 link_role);
+extern void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv);
+extern BOOLEAN btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk);
+extern void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable);
+#endif
+
+/* LE device management functions */
+extern void btm_ble_reset_id( void );
+
+/* security related functions */
+extern void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local );
+extern BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div);
+extern BOOLEAN btm_ble_check_link_type (BD_ADDR bd_addr);
+extern BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types);
+
+extern void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback);
+extern void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys, BOOLEAN pass_to_application);
+extern void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size);
+extern UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr);
+
+/* white list function */
+extern BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr,tBLE_ADDR_TYPE addr_type);
+extern BOOLEAN btm_update_bg_conn_list(BOOLEAN to_add, BD_ADDR bd_addr);
+extern void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy);
+extern void btm_update_adv_filter_policy(tBTM_BLE_AFP adv_policy);
+extern void btm_ble_clear_white_list (void);
+extern void btm_write_bg_conn_wl(void);
+
+/* background connection function */
+extern void btm_ble_suspend_bg_conn(void);
+extern BOOLEAN btm_ble_resume_bg_conn(tBTM_BLE_SEL_CBACK *p_sele_callback, BOOLEAN def_param);
+extern void btm_ble_update_bg_state(void);
+extern void btm_ble_initiate_select_conn(BD_ADDR bda);
+extern BOOLEAN btm_ble_start_auto_conn(BOOLEAN start);
+extern BOOLEAN btm_ble_start_select_conn(BOOLEAN start,tBTM_BLE_SEL_CBACK   *p_select_cback);
+extern BOOLEAN btm_ble_find_dev_in_whitelist(BD_ADDR bd_addr);
+extern BOOLEAN btm_ble_renew_bg_conn_params(BOOLEAN add, BD_ADDR bd_addr);
+extern void btm_ble_scan_param_idle(void);
+extern UINT8 btm_ble_count_unconn_dev_in_whitelist(void);
+
+/* BLE address management */
+extern tBLE_ADDR_TYPE btm_ble_map_bda_to_conn_bda(BD_ADDR bda);
+extern void btm_gen_resolvable_private_addr (void);
+extern void btm_gen_non_resolvable_private_addr (void);
+extern void btm_ble_resolve_random_addr(BD_ADDR random_bda, tBTM_BLE_RESOLVE_CBACK * p_cback, void *p);
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+BT_API extern void btm_ble_set_no_disc_if_pair_fail (BOOLEAN disble_disc);
+BT_API extern void btm_ble_set_test_mac_value (BOOLEAN enable, UINT8 *p_test_mac_val);
+BT_API extern void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr);
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/stack/btm/btm_dev.c b/stack/btm/btm_dev.c
new file mode 100644
index 0000000..04994d1
--- /dev/null
+++ b/stack/btm/btm_dev.c
@@ -0,0 +1,464 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for the Bluetooth Device Manager
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+
+#include "bt_types.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "hcidefs.h"
+#include "l2c_api.h"
+static tBTM_SEC_DEV_REC *btm_find_oldest_dev (void);
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddDevice
+**
+** Description      Add/modify device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  dev_class        - Device Class
+**                  bd_name          - Name of the peer device.  NULL if unknown.
+**                  features         - Remote device's supported features. NULL if not known
+**                  trusted_mask     - Bitwise OR of services that do not
+**                                     require authorization. (array of UINT32)
+**                  link_key         - Connection link key. NULL if unknown.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class, BD_NAME bd_name,
+                          BD_FEATURES features, UINT32 trusted_mask[],
+                          LINK_KEY link_key, UINT8 key_type, tBTM_IO_CAP io_cap)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    int               i;
+
+    p_dev_rec = btm_find_dev (bd_addr);
+    if (!p_dev_rec)
+    {
+        /* There is no device record, allocate one.
+         * If we can not find an empty spot for this one, let it fail. */
+        for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++)
+        {
+            if (!(btm_cb.sec_dev_rec[i].sec_flags & BTM_SEC_IN_USE))
+            {
+                p_dev_rec = &btm_cb.sec_dev_rec[i];
+
+                /* Mark this record as in use and initialize */
+                memset (p_dev_rec, 0, sizeof (tBTM_SEC_DEV_REC));
+                p_dev_rec->sec_flags = BTM_SEC_IN_USE;
+                memcpy (p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN);
+                p_dev_rec->hci_handle = BTM_GetHCIConnHandle (bd_addr);
+
+#if BLE_INCLUDED == TRUE
+                /* use default value for background connection params */
+                /* update conn params, use default value for background connection params */
+                memset(&p_dev_rec->conn_params, 0xff, sizeof(tBTM_LE_CONN_PRAMS));
+#endif
+                break;
+            }
+        }
+
+        if (!p_dev_rec)
+            return(FALSE);
+    }
+
+    p_dev_rec->timestamp = btm_cb.dev_rec_count++;
+
+    if (dev_class)
+        memcpy (p_dev_rec->dev_class, dev_class, DEV_CLASS_LEN);
+
+    memset(p_dev_rec->sec_bd_name, 0, sizeof(tBTM_BD_NAME));
+
+    if (bd_name && bd_name[0])
+    {
+        p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
+        BCM_STRNCPY_S ((char *)p_dev_rec->sec_bd_name, sizeof (p_dev_rec->sec_bd_name),
+            (char *)bd_name, BTM_MAX_REM_BD_NAME_LEN);
+    }
+
+    if (features)
+        memcpy (p_dev_rec->features, features, sizeof (BD_FEATURES));
+    else
+        memset (p_dev_rec->features, 0, sizeof (BD_FEATURES));
+
+    BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask);
+
+    if (link_key)
+    {
+        BTM_TRACE_EVENT6 ("BTM_SecAddDevice()  BDA: %02x:%02x:%02x:%02x:%02x:%02x",
+                          bd_addr[0], bd_addr[1], bd_addr[2],
+                          bd_addr[3], bd_addr[4], bd_addr[5]);
+        p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN;
+        memcpy (p_dev_rec->link_key, link_key, LINK_KEY_LEN);
+        p_dev_rec->link_key_type = key_type;
+    }
+
+#if defined(BTIF_MIXED_MODE_INCLUDED) && (BTIF_MIXED_MODE_INCLUDED == TRUE)
+    p_dev_rec->sm4 = BTM_SM4_KNOWN;
+#endif
+
+    p_dev_rec->rmt_io_caps = io_cap;
+
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecDeleteDevice
+**
+** Description      Free resources associated with the device.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**
+** Returns          TRUE if removed OK, FALSE if not found or ACL link is active
+**
+*******************************************************************************/
+BOOLEAN BTM_SecDeleteDevice (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+
+    if (BTM_IsAclConnectionUp(bd_addr))
+    {
+        BTM_TRACE_WARNING0("BTM_SecDeleteDevice FAILED: Cannot Delete when connection is active");
+        return(FALSE);
+    }
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+        return(FALSE);
+
+    btm_sec_free_dev (p_dev_rec);
+
+    /* Tell controller to get rid of the link key if it has one stored */
+    BTM_DeleteStoredLinkKey (bd_addr, NULL);
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecReadDevName
+**
+** Description      Looks for the device name in the security database for the
+**                  specified BD address.
+**
+** Returns          Pointer to the name or NULL
+**
+*******************************************************************************/
+char *BTM_SecReadDevName (BD_ADDR bd_addr)
+{
+    char *p_name = NULL;
+    tBTM_SEC_DEV_REC *p_srec;
+
+    if ((p_srec = btm_find_dev(bd_addr)) != NULL)
+        p_name = (char *)p_srec->sec_bd_name;
+
+    return(p_name);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_alloc_dev
+**
+** Description      Look for the record in the device database for the record
+**                  with specified handle
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = NULL;
+    tBTM_INQ_INFO    *p_inq_info;
+    int               i;
+    BTM_TRACE_EVENT0 ("btm_sec_alloc_dev");
+    for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++)
+    {
+        if (!(btm_cb.sec_dev_rec[i].sec_flags & BTM_SEC_IN_USE))
+        {
+            p_dev_rec = &btm_cb.sec_dev_rec[i];
+            break;
+        }
+    }
+
+    if (!p_dev_rec)
+        p_dev_rec = btm_find_oldest_dev();
+
+    memset (p_dev_rec, 0, sizeof (tBTM_SEC_DEV_REC));
+
+    p_dev_rec->sec_flags = BTM_SEC_IN_USE;
+
+    /* Check with the BT manager if details about remote device are known */
+    /* outgoing connection */
+    if ((p_inq_info = BTM_InqDbRead(bd_addr)) != NULL)
+    {
+        memcpy (p_dev_rec->dev_class, p_inq_info->results.dev_class, DEV_CLASS_LEN);
+
+#if BLE_INCLUDED == TRUE
+        p_dev_rec->device_type = p_inq_info->results.device_type;
+        p_dev_rec->ble.ble_addr_type = p_inq_info->results.ble_addr_type;
+
+        /* update conn params, use default value for background connection params */
+        memset(&p_dev_rec->conn_params, 0xff, sizeof(tBTM_LE_CONN_PRAMS));
+#endif
+
+#if BTM_INQ_GET_REMOTE_NAME == TRUE
+        if (p_inq_info->remote_name_state == BTM_INQ_RMT_NAME_DONE)
+        {
+            BCM_STRNCPY_S ((char *)p_dev_rec->sec_bd_name, sizeof (p_dev_rec->sec_bd_name),
+                     (char *)p_inq_info->remote_name, BTM_MAX_REM_BD_NAME_LEN);
+            p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
+        }
+#endif
+    }
+    else
+    {
+#if BLE_INCLUDED == TRUE
+        p_dev_rec->device_type = BT_DEVICE_TYPE_BREDR;  /* initialize it as BR/EDR device */
+        /* update conn params, use default value for background connection params */
+        memset(&p_dev_rec->conn_params, 0xff, sizeof(tBTM_LE_CONN_PRAMS));
+#endif
+
+        if (!memcmp (bd_addr, btm_cb.connecting_bda, BD_ADDR_LEN))
+            memcpy (p_dev_rec->dev_class, btm_cb.connecting_dc, DEV_CLASS_LEN);
+    }
+
+    memcpy (p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN);
+
+    p_dev_rec->hci_handle = BTM_GetHCIConnHandle (bd_addr);
+    p_dev_rec->timestamp = btm_cb.dev_rec_count++;
+
+    return(p_dev_rec);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_free_dev
+**
+** Description      Mark device record as not used
+**
+*******************************************************************************/
+void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    p_dev_rec->sec_flags = 0;
+
+#if BLE_INCLUDED == TRUE
+    /* Clear out any saved BLE keys */
+    btm_sec_clear_ble_keys (p_dev_rec);
+#endif
+
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_dev_support_switch
+**
+** Description      This function is called by the L2CAP to check if remote
+**                  device supports role switch
+**
+** Parameters:      bd_addr       - Address of the peer device
+**
+** Returns          TRUE if device is known and role switch is supported
+**
+*******************************************************************************/
+BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    UINT8   xx;
+    BOOLEAN feature_empty = TRUE;
+
+#if BTM_SCO_INCLUDED == TRUE
+    /* Role switch is not allowed if a SCO is up */
+    if (btm_is_sco_active_by_bdaddr(bd_addr))
+        return(FALSE);
+#endif
+    p_dev_rec = btm_find_dev (bd_addr);
+    if (p_dev_rec && HCI_SWITCH_SUPPORTED(btm_cb.devcb.local_features))
+    {
+        if (HCI_SWITCH_SUPPORTED(p_dev_rec->features))
+        {
+            BTM_TRACE_DEBUG0("btm_dev_support_switch return TRUE (feature found)");
+            return (TRUE);
+        }
+
+        /* If the feature field is all zero, we never received them */
+        for (xx = 0 ; xx < BD_FEATURES_LEN ; xx++)
+        {
+            if (p_dev_rec->features[xx] != 0x00)
+            {
+                feature_empty = FALSE; /* at least one is != 0 */
+                break;
+            }
+        }
+
+        /* If we don't know peer's capabilities, assume it supports Role-switch */
+        if (feature_empty)
+        {
+            BTM_TRACE_DEBUG0("btm_dev_support_switch return TRUE (feature empty)");
+            return (TRUE);
+        }
+    }
+
+    BTM_TRACE_DEBUG0("btm_dev_support_switch return FALSE");
+    return(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_find_dev_by_handle
+**
+** Description      Look for the record in the device database for the record
+**                  with specified handle
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = &btm_cb.sec_dev_rec[0];
+    int i;
+
+    for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+    {
+        if ((p_dev_rec->sec_flags & BTM_SEC_IN_USE)
+            && (p_dev_rec->hci_handle == handle))
+            return(p_dev_rec);
+    }
+    return(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btm_find_dev
+**
+** Description      Look for the record in the device database for the record
+**                  with specified BD address
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = &btm_cb.sec_dev_rec[0];
+    int i;
+
+    if (bd_addr)
+    {
+        for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+        {
+            if ((p_dev_rec->sec_flags & BTM_SEC_IN_USE)
+                && (!memcmp (p_dev_rec->bd_addr, bd_addr, BD_ADDR_LEN)))
+                return(p_dev_rec);
+        }
+    }
+    return(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btm_find_or_alloc_dev
+**
+** Description      Look for the record in the device database for the record
+**                  with specified BD address
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BTM_TRACE_EVENT0 ("btm_find_or_alloc_dev");
+    if ((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+    {
+
+        /* Allocate a new device record or reuse the oldest one */
+        p_dev_rec = btm_sec_alloc_dev (bd_addr);
+    }
+    return(p_dev_rec);
+}
+
+/*******************************************************************************
+**
+** Function         btm_find_oldest_dev
+**
+** Description      Locates the oldest device in use. It first looks for
+**                  the oldest non-paired device.  If all devices are paired it
+**                  deletes the oldest paired device.
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_find_oldest_dev (void)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = &btm_cb.sec_dev_rec[0];
+    tBTM_SEC_DEV_REC *p_oldest = p_dev_rec;
+    UINT32       ot = 0xFFFFFFFF;
+    int i;
+
+    /* First look for the non-paired devices for the oldest entry */
+    for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+    {
+        if (((p_dev_rec->sec_flags & BTM_SEC_IN_USE) == 0)
+            || ((p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) != 0))
+            continue; /* Device is paired so skip it */
+
+        if (p_dev_rec->timestamp < ot)
+        {
+            p_oldest = p_dev_rec;
+            ot       = p_dev_rec->timestamp;
+        }
+    }
+
+    if (ot != 0xFFFFFFFF)
+        return(p_oldest);
+
+    /* All devices are paired; find the oldest */
+    p_dev_rec = &btm_cb.sec_dev_rec[0];
+    for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+    {
+        if ((p_dev_rec->sec_flags & BTM_SEC_IN_USE) == 0)
+            continue;
+
+        if (p_dev_rec->timestamp < ot)
+        {
+            p_oldest = p_dev_rec;
+            ot       = p_dev_rec->timestamp;
+        }
+    }
+    return(p_oldest);
+}
+
+
diff --git a/stack/btm/btm_devctl.c b/stack/btm/btm_devctl.c
new file mode 100644
index 0000000..f0fc437
--- /dev/null
+++ b/stack/btm/btm_devctl.c
@@ -0,0 +1,1953 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that handle BTM interface functions for the
+ *  Bluetooth device including Rest, HCI buffer size and others
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "l2c_int.h"
+
+#if BLE_INCLUDED == TRUE
+#include "gatt_int.h"
+
+#if GAP_INCLUDED == TRUE
+#include "gap_api.h"
+#include "gattdefs.h"
+#endif
+
+#endif /* BLE_INCLUDED */
+
+/* BTM_APP_DEV_INIT should be defined if additional controller initialization is
+**      needed by the application to be performed after the HCI reset
+*/
+#ifdef BTM_APP_DEV_INIT
+extern void BTM_APP_DEV_INIT(void);
+#endif
+
+#ifdef BTA_PRM_CHECK_FW_VER
+extern BOOLEAN BTA_PRM_CHECK_FW_VER(UINT8 *p);
+#endif
+
+#ifndef TT_DEV_RESET_MASK
+#define TT_DEV_RESET_MASK 0xff
+#endif
+
+/********************************************************************************/
+/*                 L O C A L    D A T A    D E F I N I T I O N S                */
+/********************************************************************************/
+
+/* The default class of device. */
+#ifndef BTM_INIT_CLASS_OF_DEVICE
+#define BTM_INIT_CLASS_OF_DEVICE    "\x00\x1F\x00"
+#endif
+
+#ifndef BTM_DEV_RESET_TIMEOUT
+#define BTM_DEV_RESET_TIMEOUT   4
+#endif
+
+#define BTM_DEV_REPLY_TIMEOUT   2    /* 1 second expiration time is not good. Timer may start between 0 and 1 second. */
+                                     /* if it starts at the very end of the 0 second, timer will expire really easily. */
+
+#define BTM_INFO_TIMEOUT        5   /* 5 seconds for info response */
+
+/* After Reset a timeout can be specified in the target.h for specific targets
+ * that may require additional time to reset
+ * otherwise no timeout is required
+*/
+#ifndef BTM_AFTER_RESET_TIMEOUT
+#define BTM_AFTER_RESET_TIMEOUT 0
+#endif
+
+/* Internal baseband so the parameters such as local features, version etc. are known
+so there is no need to issue HCI commands and wait for responses at BTM initialization */
+#ifndef BTM_INTERNAL_BB
+#define BTM_INTERNAL_BB FALSE
+#endif
+
+/* The local version information in the format specified in the HCI read local version
+response message */
+#ifndef BTM_INTERNAL_LOCAL_VER
+#define BTM_INTERNAL_LOCAL_VER {0x00, 0x01, 0x05, 0x81, 0x01, 0x30, 0x00, 0x40, 0x8D}
+#endif
+
+/* The local features information in the format specified in the HCI read local features
+response message */
+#ifndef BTM_INTERNAL_LOCAL_FEA
+#define BTM_INTERNAL_LOCAL_FEA {0x00, 0xFF, 0xF9, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00}
+#endif
+
+#ifndef BTM_SET_DEV_NAME_UPON_RESET
+#define BTM_SET_DEV_NAME_UPON_RESET TRUE
+#endif
+
+/* host SCO buffer size */
+#ifndef BTM_SCO_HOST_BUF_SIZE
+#define BTM_SCO_HOST_BUF_SIZE       0xff
+#endif
+
+#ifndef BTM_GPS_UIPC_CH_NB
+#define BTM_GPS_UIPC_CH_NB UIPC_CH_ID_1
+#endif
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void btm_dev_reset (void);
+static void btm_after_reset_hold_complete (void);
+static void btm_continue_reset (void);
+
+/*******************************************************************************
+**
+** Function         btm_dev_init
+**
+** Description      This function is on the BTM startup
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_dev_init (void)
+{
+#if 0  /* cleared in btm_init; put back in if called from anywhere else! */
+    memset (&btm_cb.devcb, 0, sizeof (tBTM_DEVCB));
+#endif
+
+    /* Initialize nonzero defaults */
+#if (BTM_MAX_LOC_BD_NAME_LEN > 0)
+    memset(btm_cb.cfg.bd_name, 0, sizeof(tBTM_LOC_BD_NAME));
+#if (BTM_USE_DEF_LOCAL_NAME == TRUE)
+    BCM_STRNCPY_S(btm_cb.cfg.bd_name, sizeof(btm_cb.cfg.bd_name), BTM_DEF_LOCAL_NAME, BTM_MAX_LOC_BD_NAME_LEN);
+#endif
+#endif
+
+    btm_cb.devcb.reset_timer.param  = (TIMER_PARAM_TYPE)TT_DEV_RESET;
+    btm_cb.devcb.rln_timer.param    = (TIMER_PARAM_TYPE)TT_DEV_RLN;
+    btm_cb.devcb.rlinkp_timer.param = (TIMER_PARAM_TYPE)TT_DEV_RLNKP;
+
+    btm_cb.btm_acl_pkt_types_supported = BTM_ACL_PKT_TYPES_MASK_DH1 + BTM_ACL_PKT_TYPES_MASK_DM1 +
+                                         BTM_ACL_PKT_TYPES_MASK_DH3 + BTM_ACL_PKT_TYPES_MASK_DM3 +
+                                         BTM_ACL_PKT_TYPES_MASK_DH5 + BTM_ACL_PKT_TYPES_MASK_DM5;
+
+    btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1 +
+                                         BTM_SCO_PKT_TYPES_MASK_HV2 +
+                                         BTM_SCO_PKT_TYPES_MASK_HV3 +
+                                         BTM_SCO_PKT_TYPES_MASK_EV3 +
+                                         BTM_SCO_PKT_TYPES_MASK_EV4 +
+                                         BTM_SCO_PKT_TYPES_MASK_EV5;
+
+    btm_cb.first_disabled_channel = 0xff; /* To allow disabling 0th channel alone */
+    btm_cb.last_disabled_channel = 0xff; /* To allow disabling 0th channel alone */
+
+#if (BTM_AUTOMATIC_HCI_RESET == TRUE)
+
+#if (BTM_FIRST_RESET_DELAY > 0)
+    btm_cb.devcb.state = BTM_DEV_STATE_WAIT_RESET_CMPLT;
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_FIRST_RESET_DELAY);
+#else
+    btm_dev_reset();
+#endif
+
+#else
+   BTM_TRACE_EVENT0 ("BTM_AUTOMATIC_HCI_RESET is FALSE, so skip btm reset for now");
+#endif
+
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_db_reset
+**
+** Description      This function is called by BTM_DeviceReset and clears out any
+**                  pending callbacks for inquiries, discoveries, other pending
+**                  functions that may be in progress.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_db_reset (void)
+{
+    tBTM_CMPL_CB    *p_cb;
+    tBTM_STATUS      status = BTM_DEV_RESET;
+
+    btm_inq_db_reset();
+
+    if (btm_cb.devcb.p_rln_cmpl_cb)
+    {
+        p_cb = btm_cb.devcb.p_rln_cmpl_cb;
+        btm_cb.devcb.p_rln_cmpl_cb = NULL;
+
+        if (p_cb)
+            (*p_cb)((void *) NULL);
+    }
+
+    if (btm_cb.devcb.p_rlinkp_cmpl_cb)
+    {
+        p_cb = btm_cb.devcb.p_rlinkp_cmpl_cb;
+        btm_cb.devcb.p_rlinkp_cmpl_cb = NULL;
+
+        if (p_cb)
+            (*p_cb)((void *) &status);
+    }
+
+    if (btm_cb.devcb.p_rssi_cmpl_cb)
+    {
+        p_cb = btm_cb.devcb.p_rssi_cmpl_cb;
+        btm_cb.devcb.p_rssi_cmpl_cb = NULL;
+
+        if (p_cb)
+            (*p_cb)((tBTM_RSSI_RESULTS *) &status);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         btm_dev_absent
+**
+** Description      This function is called by when it is detected that the
+**                  device is not connected any more.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_dev_absent (void)
+{
+    btm_cb.devcb.state = BTM_DEV_STATE_WAIT_RESET_CMPLT;
+
+    btm_db_reset ();
+    btm_inq_db_reset();
+
+    /* If anyone wants device status notifications, give him one */
+    btm_report_device_status (BTM_DEV_STATUS_DOWN);
+
+    btu_stop_timer (&btm_cb.devcb.reset_timer);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_DeviceReset
+**
+** Description      This function is called to reset the HCI.  Callback function
+**                  if provided is called when startup of the device is
+**                  completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_DeviceReset (tBTM_CMPL_CB *p_cb)
+{
+    tBTM_STATUS status;
+
+    /* If device is already resetting, do not allow another */
+    if ((!btm_cb.devcb.p_reset_cmpl_cb) || (btm_cb.devcb.p_reset_cmpl_cb == p_cb))
+    {
+        /* Flush all ACL connections */
+        btm_acl_device_down();
+
+        /* Clear the callback, so application would not hang on reset */
+        btm_db_reset();
+
+        /* Save address of the completion routine, if provided */
+        btm_cb.devcb.p_reset_cmpl_cb = p_cb;
+
+        btm_dev_reset ();
+    }
+    else
+    {
+        /* pass an error to the bad callback, another one was already provided */
+        if (p_cb)
+        {
+            status = BTM_ILLEGAL_VALUE;
+            p_cb (&status);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_IsDeviceUp
+**
+** Description      This function is called to check if the device is up.
+**
+** Returns          TRUE if device is up, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_IsDeviceUp (void)
+{
+    return ((BOOLEAN) (btm_cb.devcb.state == BTM_DEV_STATE_READY));
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetAfhChannels
+**
+** Description      This function is called disable channels
+**
+** Returns          tBTM_STATUS
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetAfhChannels (UINT8 first, UINT8 last)
+{
+    BTM_TRACE_API4 ("BTM_SetAfhChannels first: %d (%d) last: %d (%d)",
+                       first, btm_cb.first_disabled_channel, last,
+                       btm_cb.last_disabled_channel);
+
+    /* Make sure the local device supports the feature before sending */
+    if ((!HCI_LMP_AFH_CAP_MASTR_SUPPORTED(btm_cb.devcb.local_features))   &&
+        (!HCI_LMP_AFH_CLASS_SLAVE_SUPPORTED(btm_cb.devcb.local_features)) &&
+        (!HCI_LMP_AFH_CLASS_MASTR_SUPPORTED(btm_cb.devcb.local_features)))
+        return (BTM_MODE_UNSUPPORTED);
+
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    if ((btm_cb.first_disabled_channel != first)
+     || (btm_cb.last_disabled_channel  != last))
+    {
+        if (btsnd_hcic_set_afh_channels (first, last))
+        {
+            btm_cb.first_disabled_channel = first;
+            btm_cb.last_disabled_channel  = last;
+        }
+        else
+            return (BTM_NO_RESOURCES);
+    }
+    return (BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetAfhChannelAssessment
+**
+** Description      This function is called to set the channel assessment mode on or off
+**
+** Returns          none
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetAfhChannelAssessment (BOOLEAN enable_or_disable)
+{
+    /* whatever app wants if device is not 1.2 scan type should be STANDARD */
+    if (!HCI_LMP_AFH_CAP_SLAVE_SUPPORTED(btm_cb.devcb.local_features))
+     return (BTM_MODE_UNSUPPORTED);
+
+    if (!btsnd_hcic_write_afh_channel_assessment_mode (enable_or_disable))
+        return (BTM_NO_RESOURCES);
+
+    return (BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ContinueReset
+**
+** Description      This function is called by the application to continue
+**                  initialization after the application has completed its
+**                  vendor specific sequence.  It is only used when
+**                  BTM_APP_DEV_INIT is defined in target.h.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_ContinueReset (void)
+{
+#ifdef BTM_APP_DEV_INIT
+    btm_continue_reset();
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_dev_reset
+**
+** Description      Local function called to send a reset command
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_dev_reset (void)
+{
+    btm_cb.devcb.state = BTM_DEV_STATE_WAIT_RESET_CMPLT;
+
+    /* flush out the command complete queue and command transmit queue */
+    btu_hcif_flush_cmd_queue();
+
+    /* Start reset timer.  When timer expires we will send first command */
+    /* from the setup sequence */
+
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL,
+                     BTM_DEV_RESET_TIMEOUT);
+    btsnd_hcic_reset (LOCAL_BR_EDR_CONTROLLER_ID);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_get_hci_buf_size
+**
+** Description      Local function called to send a read buffer size command
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_get_hci_buf_size (void)
+{
+
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    /* Send a Read Buffer Size message to the Host Controller. */
+    btsnd_hcic_read_buffer_size ();
+
+}
+#if BLE_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function         btm_read_ble_wl_size
+**
+** Description      Local function called to send a read BLE buffer size command
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_ble_wl_size(void)
+{
+    BTM_TRACE_DEBUG0("btm_read_ble_wl_size ");
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    /* Send a Read Buffer Size message to the Host Controller. */
+    btsnd_hcic_ble_read_white_list_size();
+}
+/*******************************************************************************
+**
+** Function         btm_get_ble_buffer_size
+**
+** Description      Local function called to send a read BLE buffer size command
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_get_ble_buffer_size(void)
+{
+    BTM_TRACE_DEBUG0("btm_get_ble_buffer_size ");
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    /* Send a Read Buffer Size message to the Host Controller. */
+    btsnd_hcic_ble_read_buffer_size ();
+}
+#endif
+/*******************************************************************************
+**
+** Function         btm_get_local_version
+**
+** Description      Local function called to send a read local version to controller
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_get_local_version (void)
+{
+
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    /* Send a Read Local Version message to the Host Controller. */
+    btsnd_hcic_read_local_ver (LOCAL_BR_EDR_CONTROLLER_ID);
+    btsnd_hcic_read_bd_addr ();
+
+#if BTM_PWR_MGR_INCLUDED == TRUE
+        btm_pm_reset();
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_local_features
+**
+** Description      Local function called to send a read local features
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_get_local_features (void)
+{
+    btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    btsnd_hcic_read_local_features ();
+}
+
+/*******************************************************************************
+**
+** Function         btm_dev_timeout
+**
+** Description      This function is called when a timer list entry expires.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_dev_timeout (TIMER_LIST_ENT  *p_tle)
+{
+    TIMER_PARAM_TYPE timer_type = (TIMER_PARAM_TYPE)p_tle->param;
+
+    if ((timer_type & TT_DEV_RESET_MASK) == TT_DEV_RESET)
+    {
+        /* Call device reset as long as there is timeout*/
+        btm_dev_reset();
+    }
+    else if (timer_type == (TIMER_PARAM_TYPE)TT_DEV_RLN)
+    {
+        tBTM_CMPL_CB  *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
+
+        btm_cb.devcb.p_rln_cmpl_cb = NULL;
+
+        if (p_cb)
+            (*p_cb)((void *) NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_reset_complete
+**
+** Description      This function is called when command complete for HCI_Reset
+**                  is received.  It does not make sense to send next command
+**                  because device is resetting after command complete is
+**                  received.  Just start timer and set required state.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_reset_complete (void)
+{
+    int devinx;
+
+    BTM_TRACE_EVENT0 ("btm_reset_complete");
+
+#ifdef BRCM_VS
+    btm_vs_reset_complete();
+#endif
+
+
+    /* Handle if btm initiated the reset */
+    if (btm_cb.devcb.state == BTM_DEV_STATE_WAIT_RESET_CMPLT)
+    {
+        /* Tell L2CAP that all connections are gone */
+        l2cu_device_reset ();
+
+        /* Clear current security state */
+        for (devinx = 0; devinx < BTM_SEC_MAX_DEVICE_RECORDS; devinx++)
+        {
+            btm_cb.sec_dev_rec[devinx].sec_state = BTM_SEC_STATE_IDLE;
+        }
+
+        /* After the reset controller should restore all parameters to defaults. */
+        btm_cb.btm_inq_vars.inq_counter       = 1;
+        btm_cb.btm_inq_vars.inq_scan_window   = HCI_DEF_INQUIRYSCAN_WINDOW;
+        btm_cb.btm_inq_vars.inq_scan_period   = HCI_DEF_INQUIRYSCAN_INTERVAL;
+        btm_cb.btm_inq_vars.inq_scan_type     = HCI_DEF_SCAN_TYPE;
+
+        btm_cb.btm_inq_vars.page_scan_window  = HCI_DEF_PAGESCAN_WINDOW;
+        btm_cb.btm_inq_vars.page_scan_period  = HCI_DEF_PAGESCAN_INTERVAL;
+        btm_cb.btm_inq_vars.page_scan_type    = HCI_DEF_SCAN_TYPE;
+
+#if (BTM_AFTER_RESET_TIMEOUT > 0)
+        btu_start_timer (&btm_cb.devcb.reset_timer, BTU_TTYPE_BTM_DEV_CTL,
+                         BTM_AFTER_RESET_TIMEOUT);
+#else
+        btm_cb.devcb.state = BTM_DEV_STATE_WAIT_AFTER_RESET;
+        btm_after_reset_hold_complete();
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+     btm_cb.ble_ctr_cb.bg_conn_state = BLE_BG_CONN_IDLE;
+     btm_cb.ble_ctr_cb.bg_conn_dev_num = 0;
+     btm_cb.ble_ctr_cb.bg_conn_type = BTM_BLE_CONN_NONE;
+     btm_cb.ble_ctr_cb.p_select_cback = NULL;
+     memset(&btm_cb.ble_ctr_cb.bg_conn_dev_list, 0, (sizeof(BD_ADDR)*BTM_BLE_MAX_BG_CONN_DEV_NUM));
+     gatt_reset_bgdev_list();
+#endif
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_continue_reset
+**
+** Description      This function is called when wait period expired after
+**                  device reset or called by the application to continue
+**                  initialization after the application has completed its
+**                  vendor specific sequence.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_continue_reset (void)
+{
+
+    /* Reinitialize the default class of device */
+#if BTM_INTERNAL_BB == TRUE
+    btsnd_hcic_read_bd_addr ();
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    btm_pm_reset();
+#endif
+#endif
+
+    btm_get_hci_buf_size ();
+
+    /* default device class */
+    BTM_SetDeviceClass((UINT8 *) BTM_INIT_CLASS_OF_DEVICE);
+
+#if (BTM_MAX_LOC_BD_NAME_LEN > 0) && (BTM_SET_DEV_NAME_UPON_RESET == TRUE)
+    BTM_SetLocalDeviceName(btm_cb.cfg.bd_name);
+#elif BTM_USE_DEF_LOCAL_NAME == TRUE
+    BTM_SetLocalDeviceName(BTM_DEF_LOCAL_NAME);
+#endif
+
+    BTM_SetPinType (btm_cb.cfg.pin_type, btm_cb.cfg.pin_code, btm_cb.cfg.pin_code_len);
+}
+
+/*******************************************************************************
+**
+** Function         btm_after_reset_hold_complete
+**
+** Description      This function is called when wait period expired after
+**                  device reset.  Continue intitialization
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_after_reset_hold_complete (void)
+{
+#ifdef BTM_APP_DEV_INIT
+    btu_stop_timer(&btm_cb.devcb.reset_timer);
+    BTM_APP_DEV_INIT();
+#else
+    btm_continue_reset();
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_hci_buf_size_complete
+**
+** Description      This function is called when command complete for
+**                  get HCI buffer size is received.  Start timer and send
+**                  read local featues request
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT8       lm_sco_buf_size;
+    UINT16      lm_num_acl_bufs;
+    UINT16      lm_num_sco_bufs;
+    UINT16      acl_buf_size;
+
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT16 (btu_cb.hcit_acl_data_size, p);
+        STREAM_TO_UINT8  (lm_sco_buf_size,   p);
+        STREAM_TO_UINT16 (lm_num_acl_bufs,   p);
+        STREAM_TO_UINT16 (lm_num_sco_bufs,   p);
+
+        btu_cb.hcit_acl_pkt_size = btu_cb.hcit_acl_data_size + HCI_DATA_PREAMBLE_SIZE;
+
+        l2c_link_processs_num_bufs (lm_num_acl_bufs);
+
+#if BTM_ACL_BUF_SIZE > 0
+        acl_buf_size = (BTM_ACL_BUF_SIZE < L2CAP_MTU_SIZE) ? BTM_ACL_BUF_SIZE : L2CAP_MTU_SIZE;
+#else
+        acl_buf_size = L2CAP_MTU_SIZE;
+#endif
+        /* Tell the controller what our buffer sizes are. ?? Need SCO info */
+        btsnd_hcic_set_host_buf_size (acl_buf_size, BTM_SCO_HOST_BUF_SIZE, L2CAP_HOST_FC_ACL_BUFS, 10);
+
+#if L2CAP_HOST_FLOW_CTRL == TRUE
+        btsnd_hcic_set_host_flow_ctrl (HCI_HOST_FLOW_CTRL_ACL_ON);
+#endif
+    }
+
+    /* Set the device into connectable and/or discoverable mode (if configured to do so) */
+#if BTM_IS_CONNECTABLE == TRUE
+    (void) BTM_SetConnectability (BTM_CONNECTABLE, BTM_DEFAULT_CONN_WINDOW, BTM_DEFAULT_CONN_INTERVAL);
+#endif
+
+#if BTM_IS_DISCOVERABLE == TRUE
+    (void) BTM_SetDiscoverability (BTM_DEFAULT_DISC_MODE, BTM_DEFAULT_DISC_WINDOW, BTM_DEFAULT_DISC_INTERVAL);
+#endif
+
+#if BTM_INTERNAL_BB == TRUE
+    {
+        UINT8 buf[9] = BTM_INTERNAL_LOCAL_VER;
+        btm_read_local_version_complete( buf, 9 );
+    }
+#else
+    btm_get_local_version ();
+#endif
+}
+
+#if (BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btm_read_ble_buf_size_complete
+**
+** Description      This function is called when command complete for
+**                  get HCI buffer size is received.  Start timer and send
+**                  read local featues request
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT16      lm_num_le_bufs;
+
+     BTM_TRACE_DEBUG0("btm_read_ble_buf_size_complete ");
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT16 (btu_cb.hcit_ble_acl_data_size, p);
+        STREAM_TO_UINT8 (lm_num_le_bufs,   p);
+
+        btu_cb.hcit_ble_acl_pkt_size = btu_cb.hcit_ble_acl_data_size + HCI_DATA_PREAMBLE_SIZE;
+
+        l2c_link_processs_ble_num_bufs (lm_num_le_bufs);
+    }
+
+#if BTM_INTERNAL_BB == TRUE
+    {
+        UINT8 buf[9] = BTM_INTERNAL_LOCAL_FEA;
+        btm_read_local_features_complete( buf, 9 );
+    }
+#else
+#ifdef BRCM_VS
+    btm_brcm_feat_init();
+#else
+    /* get local feature if BRCM specific feature is not included  */
+    btm_get_local_features ();
+#endif
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_white_list_size_complete
+**
+** Description      This function read the current white list size.
+*******************************************************************************/
+void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+
+     BTM_TRACE_DEBUG0("btm_read_white_list_size_complete ");
+    STREAM_TO_UINT8  (status, p);
+
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_UINT8(btm_cb.ble_ctr_cb.max_filter_entries, p);
+        btm_cb.ble_ctr_cb.num_empty_filter = btm_cb.ble_ctr_cb.max_filter_entries;
+    }
+
+    btm_get_ble_buffer_size();
+}
+
+#endif
+/*******************************************************************************
+**
+** Function         btm_read_local_version_complete
+**
+** Description      This function is called when local BD Addr read complete
+**                  message is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len)
+{
+    tBTM_VERSION_INFO   *p_vi = &btm_cb.devcb.local_version;
+    UINT8                status;
+
+#ifdef BTA_PRM_CHECK_FW_VER
+    if(BTA_PRM_CHECK_FW_VER(p))
+        return;
+#endif
+
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+
+        STREAM_TO_UINT8  (p_vi->hci_version, p);
+        STREAM_TO_UINT16 (p_vi->hci_revision, p);
+        STREAM_TO_UINT8  (p_vi->lmp_version, p);
+        STREAM_TO_UINT16 (p_vi->manufacturer, p);
+        STREAM_TO_UINT16 (p_vi->lmp_subversion, p);
+    }
+
+#if BLE_INCLUDED == TRUE
+    {
+        btm_read_ble_wl_size();
+    }
+#elif BTM_INTERNAL_BB == TRUE
+    {
+        UINT8 buf[9] = BTM_INTERNAL_LOCAL_FEA;
+        btm_read_local_features_complete( buf, 9 );
+    }
+#else
+#ifdef BRCM_VS
+    btm_brcm_feat_init();
+#else
+    /* get local feature if BRCM specific feature is not included  */
+    btm_get_local_features ();
+#endif
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_local_features_complete
+**
+** Description      This function is called when local features read is complete.
+**                  This is the last step of the startup sequence.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len)
+{
+    tBTM_DEVCB     *p_devcb = &btm_cb.devcb;
+    tBTM_CMPL_CB   *p_cb = p_devcb->p_reset_cmpl_cb;
+    UINT8           status;
+    UINT16          xx;
+    UINT8 last;
+    UINT8 first;
+
+    btu_stop_timer (&btm_cb.devcb.reset_timer);
+    /* If there was a callback address for reset complete, call it */
+    p_devcb->p_reset_cmpl_cb = NULL;
+
+    STREAM_TO_UINT8  (status, p);
+    if (status == HCI_SUCCESS)
+    {
+        /* stop guard timer to avoid accidental timeout */
+        btu_stop_timer(&p_devcb->reset_timer);
+
+        p_devcb->state = BTM_DEV_STATE_READY;
+
+        /* Extract features and create "btm_acl_pkt_types_supported" flag
+        */
+        for (xx = 0; xx < HCI_NUM_FEATURE_BYTES; xx++)
+            STREAM_TO_UINT8 (p_devcb->local_features[xx], p);
+
+        /* Create ACL supported packet types mask
+        */
+        btm_cb.btm_acl_pkt_types_supported = (BTM_ACL_PKT_TYPES_MASK_DH1 +
+                                              BTM_ACL_PKT_TYPES_MASK_DM1);
+
+        if (HCI_3_SLOT_PACKETS_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH3 +
+                                                   BTM_ACL_PKT_TYPES_MASK_DM3);
+
+        if (HCI_5_SLOT_PACKETS_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_DH5 +
+                                                   BTM_ACL_PKT_TYPES_MASK_DM5);
+
+        /* _NO_X_DXX masks are reserved before ver 2.0.
+           Set them only for later versions of controller */
+        if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+        {
+
+            /* Add in EDR related ACL types */
+            if (!HCI_EDR_ACL_2MPS_SUPPORTED(p_devcb->local_features))
+            {
+                btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 +
+                                                       BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
+                                                       BTM_ACL_PKT_TYPES_MASK_NO_2_DH5);
+            }
+
+            if (!HCI_EDR_ACL_3MPS_SUPPORTED(p_devcb->local_features))
+            {
+                btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 +
+                                                       BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 +
+                                                       BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
+            }
+
+            /* Check to see if 3 and 5 slot packets are available */
+            if (HCI_EDR_ACL_2MPS_SUPPORTED(p_devcb->local_features) ||
+                HCI_EDR_ACL_3MPS_SUPPORTED(p_devcb->local_features))
+            {
+                if (!HCI_3_SLOT_EDR_ACL_SUPPORTED(p_devcb->local_features))
+                    btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 +
+                                                           BTM_ACL_PKT_TYPES_MASK_NO_3_DH3);
+
+                if (!HCI_5_SLOT_EDR_ACL_SUPPORTED(p_devcb->local_features))
+                    btm_cb.btm_acl_pkt_types_supported |= (BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 +
+                                                           BTM_ACL_PKT_TYPES_MASK_NO_3_DH5);
+            }
+        }
+
+        BTM_TRACE_DEBUG1("Local supported ACL packet types: 0x%04x",
+                         btm_cb.btm_acl_pkt_types_supported);
+
+        /* Create (e)SCO supported packet types mask
+        */
+        btm_cb.btm_sco_pkt_types_supported = 0;
+#if BTM_SCO_INCLUDED == TRUE
+        btm_cb.sco_cb.esco_supported = FALSE;
+#endif
+        if (HCI_SCO_LINK_SUPPORTED(p_devcb->local_features))
+        {
+            btm_cb.btm_sco_pkt_types_supported = BTM_SCO_PKT_TYPES_MASK_HV1;
+
+            if (HCI_HV2_PACKETS_SUPPORTED(p_devcb->local_features))
+                btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV2;
+
+            if (HCI_HV3_PACKETS_SUPPORTED(p_devcb->local_features))
+                btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_HV3;
+        }
+
+        if (HCI_ESCO_EV3_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV3;
+
+        if (HCI_ESCO_EV4_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV4;
+
+        if (HCI_ESCO_EV5_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_EV5;
+#if BTM_SCO_INCLUDED == TRUE
+        if (btm_cb.btm_sco_pkt_types_supported & BTM_ESCO_LINK_ONLY_MASK)
+        {
+            btm_cb.sco_cb.esco_supported = TRUE;
+
+            /* Add in EDR related eSCO types */
+            if (HCI_EDR_ESCO_2MPS_SUPPORTED(p_devcb->local_features))
+            {
+                if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_devcb->local_features))
+                    btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_2_EV5;
+            }
+            else
+            {
+                btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_2_EV3 +
+                                                       BTM_SCO_PKT_TYPES_MASK_NO_2_EV5);
+            }
+
+            if (HCI_EDR_ESCO_3MPS_SUPPORTED(p_devcb->local_features))
+            {
+                if (!HCI_3_SLOT_EDR_ESCO_SUPPORTED(p_devcb->local_features))
+                    btm_cb.btm_sco_pkt_types_supported |= BTM_SCO_PKT_TYPES_MASK_NO_3_EV5;
+            }
+            else
+            {
+                btm_cb.btm_sco_pkt_types_supported |= (BTM_SCO_PKT_TYPES_MASK_NO_3_EV3 +
+                                                       BTM_SCO_PKT_TYPES_MASK_NO_3_EV5);
+            }
+        }
+#endif
+
+        BTM_TRACE_DEBUG1("Local supported SCO packet types: 0x%04x",
+                         btm_cb.btm_sco_pkt_types_supported);
+
+        /* Create Default Policy Settings
+        */
+        if (HCI_SWITCH_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_def_link_policy |= HCI_ENABLE_MASTER_SLAVE_SWITCH;
+        else
+            btm_cb.btm_def_link_policy &= ~HCI_ENABLE_MASTER_SLAVE_SWITCH;
+
+        if (HCI_HOLD_MODE_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_def_link_policy |= HCI_ENABLE_HOLD_MODE;
+        else
+            btm_cb.btm_def_link_policy &= ~HCI_ENABLE_HOLD_MODE;
+
+        if (HCI_SNIFF_MODE_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_def_link_policy |= HCI_ENABLE_SNIFF_MODE;
+        else
+            btm_cb.btm_def_link_policy &= ~HCI_ENABLE_SNIFF_MODE;
+
+        if (HCI_PARK_MODE_SUPPORTED(p_devcb->local_features))
+            btm_cb.btm_def_link_policy |= HCI_ENABLE_PARK_MODE;
+        else
+            btm_cb.btm_def_link_policy &= ~HCI_ENABLE_PARK_MODE;
+
+        btm_sec_dev_reset ();
+
+        /* If 802.11 present might have to disable some channels */
+        if (btm_cb.last_disabled_channel != 0xff)
+        {
+            last  = btm_cb.last_disabled_channel;
+            first = btm_cb.first_disabled_channel;
+            btm_cb.last_disabled_channel  = 0xff;
+            btm_cb.first_disabled_channel = 0xff;
+            BTM_SetAfhChannels(first, last);
+        }
+
+#if ((BTM_EIR_SERVER_INCLUDED == TRUE)||(BTM_EIR_CLIENT_INCLUDED == TRUE))
+        if (HCI_LMP_INQ_RSSI_SUPPORTED(p_devcb->local_features))
+        {
+            if (HCI_EXT_INQ_RSP_SUPPORTED(p_devcb->local_features))
+                BTM_SetInquiryMode (BTM_INQ_RESULT_EXTENDED);
+            else
+                BTM_SetInquiryMode (BTM_INQ_RESULT_WITH_RSSI);
+        }
+#else
+        if (HCI_LMP_INQ_RSSI_SUPPORTED(p_devcb->local_features))
+            BTM_SetInquiryMode (BTM_INQ_RESULT_WITH_RSSI);
+#endif
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+        if( HCI_NON_FLUSHABLE_PB_SUPPORTED(p_devcb->local_features))
+            l2cu_set_non_flushable_pbf(TRUE);
+        else
+            l2cu_set_non_flushable_pbf(FALSE);
+#endif
+        BTM_SetPageScanType (BTM_DEFAULT_SCAN_TYPE);
+        BTM_SetInquiryScanType (BTM_DEFAULT_SCAN_TYPE);
+
+        /* If anyone wants device status notifications, give him one */
+        btm_report_device_status (BTM_DEV_STATUS_UP);
+
+#ifdef BRCM_VS
+    btm_brcm_arc_init();
+#endif
+
+        /* Reset sequence is complete. If this was an application originated */
+        /* reset, tell him its done.                                         */
+        if (p_cb)
+            (*p_cb)((void *) NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_voice_coding_support
+**
+** Description      This function is provides a way to get the voice coding schemes
+**                  supported the device.
+**
+** Returns          A bit mask - Bit 0 if set indicates CVSD support
+**                               Bit 1 if set indicates PCM A-law support
+**                               Bit 2 if set indicates PCM Mu-law support
+**
+*******************************************************************************/
+
+UINT8 btm_get_voice_coding_support( void )
+{
+    UINT8 code = 0;
+
+    if( HCI_LMP_CVSD_SUPPORTED(btm_cb.devcb.local_features) ) code |= 0x01 ;
+    if( HCI_LMP_A_LAW_SUPPORTED(btm_cb.devcb.local_features) ) code |= 0x02 ;
+    if( HCI_LMP_U_LAW_SUPPORTED(btm_cb.devcb.local_features) )  code |= 0x04 ;
+
+    return code ;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetLocalDeviceName
+**
+** Description      This function is called to set the local device name.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetLocalDeviceName (char *p_name)
+{
+    UINT8    *p;
+#if BLE_INCLUDED == TRUE && GAP_INCLUDED == TRUE
+    tGAP_BLE_ATTR_VALUE     attr_value;
+#endif
+
+    if (!p_name || !p_name[0] || (strlen ((char *)p_name) > BD_NAME_LEN))
+        return (BTM_ILLEGAL_VALUE);
+
+    if (btm_cb.devcb.state == BTM_DEV_STATE_WAIT_RESET_CMPLT ||
+        btm_cb.devcb.state == BTM_DEV_STATE_WAIT_AFTER_RESET)
+        return (BTM_DEV_RESET);
+
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+    /* Save the device name if local storage is enabled */
+    p = (UINT8 *)btm_cb.cfg.bd_name;
+    if (p != (UINT8 *)p_name)
+    {
+        BCM_STRNCPY_S(btm_cb.cfg.bd_name, sizeof(btm_cb.cfg.bd_name), p_name, BTM_MAX_LOC_BD_NAME_LEN);
+        btm_cb.cfg.bd_name[BTM_MAX_LOC_BD_NAME_LEN] = '\0';
+    }
+#else
+    p = (UINT8 *)p_name;
+#endif
+
+#if BLE_INCLUDED == TRUE && GAP_INCLUDED == TRUE
+    attr_value.p_dev_name = (UINT8 *)p_name;
+    GAP_BleAttrDBUpdate(GATT_UUID_GAP_DEVICE_NAME, &attr_value);
+#endif
+
+    if (btsnd_hcic_change_name(p))
+        return (BTM_CMD_STARTED);
+    else
+        return (BTM_NO_RESOURCES);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceName
+**
+** Description      This function is called to read the local device name.
+**
+** Returns          status of the operation
+**                  If success, BTM_SUCCESS is returned and p_name points stored
+**                              local device name
+**                  If BTM doesn't store local device name, BTM_NO_RESOURCES is
+**                              is returned and p_name is set to NULL
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name)
+{
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+    *p_name = btm_cb.cfg.bd_name;
+    return(BTM_SUCCESS);
+#else
+    *p_name = NULL;
+    return(BTM_NO_RESOURCES);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceNameFromController
+**
+** Description      Get local device name from controller. Do not use cached
+**                  name (used to get chip-id prior to btm reset complete).
+**
+** Returns          BTM_CMD_STARTED if successful, otherwise an error
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback)
+{
+    /* Check if rln already in progress */
+    if (btm_cb.devcb.p_rln_cmpl_cb)
+        return(BTM_NO_RESOURCES);
+
+    /* Save callback */
+    btm_cb.devcb.p_rln_cmpl_cb = p_rln_cmpl_cback;
+
+    btsnd_hcic_read_name();
+    btu_start_timer (&btm_cb.devcb.rln_timer, BTU_TTYPE_BTM_DEV_CTL, BTM_DEV_REPLY_TIMEOUT);
+
+    return BTM_CMD_STARTED;
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_local_name_complete
+**
+** Description      This function is called when local name read complete.
+**                  message is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len)
+{
+    tBTM_CMPL_CB   *p_cb = btm_cb.devcb.p_rln_cmpl_cb;
+    UINT8           status;
+
+    btu_stop_timer (&btm_cb.devcb.rln_timer);
+
+    /* If there was a callback address for read local name, call it */
+    btm_cb.devcb.p_rln_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (status, p);
+
+        if (status == HCI_SUCCESS)
+            (*p_cb)(p);
+        else
+            (*p_cb)(NULL);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetLocalDeviceAddr
+**
+** Description      This function is called to read the local device address
+**
+** Returns          void
+**                  the local device address is copied into bd_addr
+**
+*******************************************************************************/
+void BTM_GetLocalDeviceAddr (BD_ADDR bd_addr)
+{
+    memcpy (bd_addr, btm_cb.devcb.local_addr, BD_ADDR_LEN);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceAddr
+**
+** Description      This function is called to read the local device address
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLocalDeviceAddr (tBTM_CMPL_CB *p_cb)
+{
+    if(p_cb)
+        (*p_cb)(btm_cb.devcb.local_addr);
+
+    return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_local_addr_complete
+**
+** Description      This function is called when local BD Addr read complete
+**                  message is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len)
+{
+    UINT8           status;
+
+    STREAM_TO_UINT8  (status, p);
+
+    if (status == HCI_SUCCESS)
+    {
+        STREAM_TO_BDADDR (btm_cb.devcb.local_addr, p);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalVersion
+**
+** Description      This function is called to read the local device version
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLocalVersion (tBTM_VERSION_INFO *p_vers)
+{
+    /* Make sure the device has retrieved the info (not being reset) */
+    if (btm_cb.devcb.state < BTM_DEV_STATE_READY)
+        return (BTM_DEV_RESET);
+
+    *p_vers = btm_cb.devcb.local_version;
+
+    return (BTM_SUCCESS);
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetDeviceClass
+**
+** Description      This function is called to set the local device class
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetDeviceClass (DEV_CLASS dev_class)
+{
+    if(!memcmp (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN))
+        return(BTM_SUCCESS);
+
+    memcpy (btm_cb.devcb.dev_class, dev_class, DEV_CLASS_LEN);
+
+    if (btm_cb.devcb.state == BTM_DEV_STATE_WAIT_RESET_CMPLT ||
+        btm_cb.devcb.state == BTM_DEV_STATE_WAIT_AFTER_RESET)
+        return (BTM_DEV_RESET);
+
+    if (!btsnd_hcic_write_dev_class (dev_class))
+        return (BTM_NO_RESOURCES);
+
+    return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDeviceClass
+**
+** Description      This function is called to read the local device class
+**
+** Returns          pointer to the device class
+**
+*******************************************************************************/
+UINT8 *BTM_ReadDeviceClass (void)
+{
+    return ((UINT8 *)btm_cb.devcb.dev_class);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalFeatures
+**
+** Description      This function is called to read the local features
+**
+** Returns          pointer to the local features string
+**
+*******************************************************************************/
+UINT8 *BTM_ReadLocalFeatures (void)
+{
+    return (btm_cb.devcb.local_features);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadBrcmFeatures
+**
+** Description      This function is called to read the Broadcom specific features
+**
+** Returns          pointer to the Broadcom features string
+**
+*******************************************************************************/
+UINT8 *BTM_ReadBrcmFeatures (void)
+{
+    return (btm_cb.devcb.brcm_features);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterForDeviceStatusNotif
+**
+** Description      This function is called to register for device status
+**                  change notifications.
+**
+**                  If one registration is already there calling function should
+**                  save the pointer to the function that is return and
+**                  call it when processing of the event is complete
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb)
+{
+    tBTM_DEV_STATUS_CB *p_prev = btm_cb.devcb.p_dev_status_cb;
+
+    btm_cb.devcb.p_dev_status_cb = p_cb;
+    return (p_prev);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_VendorSpecificCommand
+**
+** Description      Send a vendor specific HCI command to the controller.
+**
+** Returns
+**      BTM_SUCCESS         Command sent. Does not expect command complete
+**                              event. (command cmpl callback param is NULL)
+**      BTM_CMD_STARTED     Command sent. Waiting for command cmpl event.
+**
+** Notes
+**      Opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode, UINT8 param_len,
+                                      UINT8 *p_param_buf, tBTM_VSC_CMPL_CB *p_cb)
+{
+    void *p_buf;
+
+    BTM_TRACE_EVENT2 ("BTM: BTM_VendorSpecificCommand: Opcode: 0x%04X, ParamLen: %i.",
+                      opcode, param_len);
+
+    /* Allocate a buffer to hold HCI command plus the callback function */
+    if ((p_buf = GKI_getbuf((UINT16)(sizeof(BT_HDR) + sizeof (tBTM_CMPL_CB *) +
+                            param_len + HCIC_PREAMBLE_SIZE))) != NULL)
+    {
+        /* Send the HCI command (opcode will be OR'd with HCI_GRP_VENDOR_SPECIFIC) */
+        btsnd_hcic_vendor_spec_cmd (p_buf, opcode, param_len, p_param_buf, (void *)p_cb);
+
+        /* Return value */
+        if (p_cb != NULL)
+            return (BTM_CMD_STARTED);
+        else
+            return (BTM_SUCCESS);
+    }
+    else
+        return (BTM_NO_RESOURCES);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_vsc_complete
+**
+** Description      This function is called when local HCI Vendor Specific
+**                  Command complete message is received from the HCI.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_vsc_complete (UINT8 *p, UINT16 opcode, UINT16 evt_len,
+                       tBTM_CMPL_CB *p_vsc_cplt_cback)
+{
+    tBTM_VSC_CMPL   vcs_cplt_params;
+
+    /* If there was a callback address for vcs complete, call it */
+    if (p_vsc_cplt_cback)
+    {
+        /* Pass paramters to the callback function */
+        vcs_cplt_params.opcode = opcode;        /* Number of bytes in return info */
+        vcs_cplt_params.param_len = evt_len;    /* Number of bytes in return info */
+        vcs_cplt_params.p_param_buf = p;
+        (*p_vsc_cplt_cback)(&vcs_cplt_params);  /* Call the VSC complete callback function */
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterForVSEvents
+**
+** Description      This function is called to register/deregister for vendor
+**                  specific HCI events.
+**
+**                  If is_register=TRUE, then the function will be registered;
+**                  if is_register=FALSE, then the function will be deregistered.
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_BUSY if maximum number of callbacks have already been
+**                           registered.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register)
+{
+    tBTM_STATUS retval = BTM_SUCCESS;
+    UINT8 i, free_idx = BTM_MAX_VSE_CALLBACKS;
+
+    /* See if callback is already registered */
+    for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
+    {
+        if (btm_cb.devcb.p_vend_spec_cb[i] == NULL)
+        {
+            /* Found a free slot. Store index */
+            free_idx = i;
+        }
+        else if (btm_cb.devcb.p_vend_spec_cb[i] == p_cb)
+        {
+            /* Found callback in lookup table. If deregistering, clear the entry. */
+            if (is_register == FALSE)
+            {
+                btm_cb.devcb.p_vend_spec_cb[i] = NULL;
+                BTM_TRACE_EVENT0("BTM Deregister For VSEvents is successfully");
+            }
+            return (BTM_SUCCESS);
+        }
+    }
+
+    /* Didn't find callback. Add callback to free slot if registering */
+    if (is_register)
+    {
+        if (free_idx < BTM_MAX_VSE_CALLBACKS)
+        {
+            btm_cb.devcb.p_vend_spec_cb[free_idx] = p_cb;
+            BTM_TRACE_EVENT0("BTM Register For VSEvents is successfully");
+        }
+        else
+        {
+            /* No free entries available */
+            BTM_TRACE_ERROR0 ("BTM_RegisterForVSEvents: too many callbacks registered");
+
+            retval = BTM_NO_RESOURCES;
+        }
+    }
+
+    return (retval);
+}
+
+/*******************************************************************************
+**
+** Function         btm_vendor_specific_evt
+**
+** Description      Process event HCI_VENDOR_SPECIFIC_EVT
+**
+**                  Note: Some controllers do not send command complete, so
+**                  the callback and busy flag are cleared here also.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len)
+{
+    UINT8 i;
+
+    BTM_TRACE_DEBUG0 ("BTM Event: Vendor Specific event from controller");
+
+    for (i=0; i<BTM_MAX_VSE_CALLBACKS; i++)
+    {
+        if (btm_cb.devcb.p_vend_spec_cb[i])
+            (*btm_cb.devcb.p_vend_spec_cb[i])(evt_len, p);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_WritePageTimeout
+**
+** Description      Send HCI Write Page Timeout.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES     If out of resources to send the command.
+**
+**
+*******************************************************************************/
+tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout)
+{
+    BTM_TRACE_EVENT1 ("BTM: BTM_WritePageTimeout: Timeout: %d.", timeout);
+
+    /* Send the HCI command */
+    if (btsnd_hcic_write_page_tout (timeout))
+        return (BTM_SUCCESS);
+    else
+        return (BTM_NO_RESOURCES);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_WriteVoiceSettings
+**
+** Description      Send HCI Write Voice Settings command.
+**                  See hcidefs.h for settings bitmask values.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES     If out of resources to send the command.
+**
+**
+*******************************************************************************/
+tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings)
+{
+    BTM_TRACE_EVENT1 ("BTM: BTM_WriteVoiceSettings: Settings: 0x%04x.", settings);
+
+    /* Send the HCI command */
+    if (btsnd_hcic_write_voice_settings ((UINT16)(settings & 0x03ff)))
+        return (BTM_SUCCESS);
+
+    return (BTM_NO_RESOURCES);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_EnableTestMode
+**
+** Description      Send HCI the enable device under test command.
+**
+**                  Note: Controller can only be taken out of this mode by
+**                      resetting the controller.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES    If out of resources to send the command.
+**
+**
+*******************************************************************************/
+tBTM_STATUS BTM_EnableTestMode(void)
+{
+    UINT8   cond;
+
+    BTM_TRACE_EVENT0 ("BTM: BTM_EnableTestMode");
+
+    /* set auto accept connection as this is needed during test mode */
+    /* Allocate a buffer to hold HCI command */
+    cond = HCI_DO_AUTO_ACCEPT_CONNECT;
+    if (!btsnd_hcic_set_event_filter(HCI_FILTER_CONNECTION_SETUP,
+                                     HCI_FILTER_COND_NEW_DEVICE,
+                                     &cond, sizeof(cond)))
+    {
+        return (BTM_NO_RESOURCES);
+    }
+
+    /* put device to connectable mode */
+    if (!BTM_SetConnectability(BTM_CONNECTABLE, BTM_DEFAULT_CONN_WINDOW,
+                               BTM_DEFAULT_CONN_INTERVAL) == BTM_SUCCESS)
+    {
+        return BTM_NO_RESOURCES;
+    }
+
+    /* put device to discoverable mode */
+    if (!BTM_SetDiscoverability(BTM_GENERAL_DISCOVERABLE, BTM_DEFAULT_DISC_WINDOW,
+                                BTM_DEFAULT_DISC_INTERVAL) == BTM_SUCCESS)
+    {
+        return BTM_NO_RESOURCES;
+    }
+
+    /* mask off all of event from controller */
+    if (!btsnd_hcic_set_event_mask(LOCAL_BR_EDR_CONTROLLER_ID,
+                                   (UINT8 *)"\x00\x00\x00\x00\x00\x00\x00\x00"))
+    {
+        return BTM_NO_RESOURCES;
+    }
+
+    /* Send the HCI command */
+    if (btsnd_hcic_enable_test_mode ())
+        return (BTM_SUCCESS);
+    else
+        return (BTM_NO_RESOURCES);
+}
+
+/*******************************************************************************
+**
+** Function         btm_get_hci_version
+**
+** Description      Local function called to retrieve the current HCI version
+**
+** Returns          Bluetooth HCI Version returned by the controller
+**
+*******************************************************************************/
+UINT8 btm_get_hci_version (void)
+{
+    return (btm_cb.devcb.local_version.hci_version);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadStoredLinkKey
+**
+** Description      This function is called to obtain link key for the specified
+**                  device from the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      bd_addr      - Address of the device
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadStoredLinkKey (BD_ADDR bd_addr,	tBTM_CMPL_CB *p_cb)
+{
+    BD_ADDR local_bd_addr;
+    BOOLEAN read_all_flag = FALSE;
+
+    /* Check if the previous command is completed */
+    if (btm_cb.devcb.p_stored_link_key_cmpl_cb)
+        return (BTM_BUSY);
+
+    if (!bd_addr)
+    {
+        /* This is to read all the link keys */
+        read_all_flag = TRUE;
+
+        /* We don't care the BD address. Just pass a non zero pointer */
+        bd_addr = local_bd_addr;
+    }
+
+    BTM_TRACE_EVENT1 ("BTM: BTM_ReadStoredLinkKey: Read_All: %s",
+                        read_all_flag ? "TRUE" : "FALSE");
+
+    /* Send the HCI command */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = p_cb;
+    if (btsnd_hcic_read_stored_key (bd_addr, read_all_flag))
+        return (BTM_SUCCESS);
+    else
+        return (BTM_NO_RESOURCES);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_WriteStoredLinkKey
+**
+** Description      This function is called to write link keys for the specified
+**                  device addresses to the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      num_keys     - Number of link keys
+**                  bd_addr      - Addresses of the devices
+**                  link_key     - Link Keys to be stored
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+tBTM_STATUS BTM_WriteStoredLinkKey (UINT8 num_keys,
+                                    BD_ADDR *bd_addr,
+                                    LINK_KEY *link_key,
+                                    tBTM_CMPL_CB *p_cb)
+{
+    /* Check if the previous command is completed */
+    if (btm_cb.devcb.p_stored_link_key_cmpl_cb)
+        return (BTM_BUSY);
+
+    BTM_TRACE_EVENT1 ("BTM: BTM_WriteStoredLinkKey: num_keys: %d", num_keys);
+
+    /* Check the maximum number of link keys */
+    if(num_keys > HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD)
+        num_keys = HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD;
+
+    /* Send the HCI command */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = p_cb;
+    if (btsnd_hcic_write_stored_key (num_keys, bd_addr, link_key))
+        return (BTM_SUCCESS);
+    else
+        return (BTM_NO_RESOURCES);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_DeleteStoredLinkKey
+**
+** Description      This function is called to delete link key for the specified
+**                  device addresses from the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      bd_addr      - Addresses of the devices
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb)
+{
+    BD_ADDR local_bd_addr;
+    BOOLEAN delete_all_flag = FALSE;
+
+    /* Check if the previous command is completed */
+    if (btm_cb.devcb.p_stored_link_key_cmpl_cb)
+        return (BTM_BUSY);
+
+    if (!bd_addr)
+    {
+        /* This is to delete all link keys */
+        delete_all_flag = TRUE;
+
+        /* We don't care the BD address. Just pass a non zero pointer */
+        bd_addr = local_bd_addr;
+    }
+
+    BTM_TRACE_EVENT1 ("BTM: BTM_DeleteStoredLinkKey: delete_all_flag: %s",
+                        delete_all_flag ? "TRUE" : "FALSE");
+
+    /* Send the HCI command */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = p_cb;
+    if (!btsnd_hcic_delete_stored_key (bd_addr, delete_all_flag))
+    {
+        return (BTM_NO_RESOURCES);
+    }
+    else
+        return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_read_stored_link_key_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the read stored link key command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_stored_link_key_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB      *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
+    tBTM_READ_STORED_LINK_KEY_COMPLETE  result;
+
+    /* If there was a callback registered for read stored link key, call it */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        /* Set the call back event to indicate command complete */
+        result.event = BTM_CB_EVT_READ_STORED_LINK_KEYS;
+
+        /* Extract the result fields from the HCI event if status is success */
+        STREAM_TO_UINT8  (result.status, p);
+        if (result.status == HCI_SUCCESS)
+        {
+            STREAM_TO_UINT16 (result.max_keys, p);
+            STREAM_TO_UINT16 (result.read_keys, p);
+        }
+        else
+        {
+            BTM_TRACE_WARNING1("Read stored link key status %d", result.status);
+            result.max_keys = 0;
+            result.read_keys = 0;
+        }
+        /* Call the call back and pass the result */
+        (*p_cb)(&result);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_write_stored_link_key_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the write stored link key command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_write_stored_link_key_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB       *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
+    tBTM_WRITE_STORED_LINK_KEY_COMPLETE  result;
+
+    /* If there was a callback registered for read stored link key, call it */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        /* Set the call back event to indicate command complete */
+        result.event = BTM_CB_EVT_WRITE_STORED_LINK_KEYS;
+
+        /* Extract the result fields from the HCI event */
+        STREAM_TO_UINT8 (result.status, p);
+        STREAM_TO_UINT8 (result.num_keys, p);
+
+        /* Call the call back and pass the result */
+        (*p_cb)(&result);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_delete_stored_link_key_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the delete stored link key command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_delete_stored_link_key_complete (UINT8 *p)
+{
+    tBTM_CMPL_CB         *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
+    tBTM_DELETE_STORED_LINK_KEY_COMPLETE  result;
+
+    /* If there was a callback registered for read stored link key, call it */
+    btm_cb.devcb.p_stored_link_key_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        /* Set the call back event to indicate command complete */
+        result.event = BTM_CB_EVT_DELETE_STORED_LINK_KEYS;
+
+        /* Extract the result fields from the HCI event */
+        STREAM_TO_UINT8  (result.status, p);
+        STREAM_TO_UINT16 (result.num_keys, p);
+
+        /* Call the call back and pass the result */
+        (*p_cb)(&result);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_return_link_keys_evt
+**
+** Description      This function is called when the return link keys event
+**                  is received from the HCI for the read stored link key command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result)
+{
+    tBTM_CMPL_CB  *p_cb = btm_cb.devcb.p_stored_link_key_cmpl_cb;
+    UINT8          i, *p, *p1;
+    UINT8          bd_addr[BD_ADDR_LEN];
+    UINT8          link_key[LINK_KEY_LEN];
+
+    /* Call the call back to pass the link keys to application */
+    if (p_cb)
+    {
+        /* Change the BD addr and Link key in to big endian order */
+        p = (UINT8 *)(result + 1);
+        for (i=0; i<result->num_keys; i++)
+        {
+            /* Initialize the backup pointer */
+            p1 = p;
+
+            /* Extract the BD Addr and Link Key */
+            REVERSE_STREAM_TO_ARRAY(bd_addr, p1, BD_ADDR_LEN);
+            REVERSE_STREAM_TO_ARRAY(link_key, p1, LINK_KEY_LEN);
+
+            /* Write the BD Addr and Link Key back in big endian format */
+            ARRAY_TO_STREAM(p, bd_addr, BD_ADDR_LEN);
+            ARRAY_TO_STREAM(p, link_key, LINK_KEY_LEN);
+        }
+
+        (*p_cb)(result);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         btm_report_device_status
+**
+** Description      This function is called when there is a change in the device
+**                  status. This function will report the new device status to
+**                  the application
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_report_device_status (tBTM_DEV_STATUS status)
+{
+    tBTM_DEV_STATUS_CB *p_cb = btm_cb.devcb.p_dev_status_cb;
+
+    /* Call the call back to pass the device status to application */
+    if (p_cb)
+        (*p_cb)(status);
+}
+
+
diff --git a/stack/btm/btm_inq.c b/stack/btm/btm_inq.c
new file mode 100644
index 0000000..5598562
--- /dev/null
+++ b/stack/btm/btm_inq.c
@@ -0,0 +1,3265 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that handle inquiries. These include
+ *  setting discoverable mode, controlling the mode of the Baseband, and
+ *  maintaining a small database of inquiry responses, with API for people
+ *  to browse it.
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+
+#include "bt_types.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "hcidefs.h"
+
+#define BTM_INQ_REPLY_TIMEOUT   3       /* 3 second timeout waiting for responses */
+
+/* TRUE to enable DEBUG traces for btm_inq */
+#ifndef BTM_INQ_DEBUG
+#define BTM_INQ_DEBUG   FALSE
+#endif
+/********************************************************************************/
+/*                 L O C A L    D A T A    D E F I N I T I O N S                */
+/********************************************************************************/
+static const LAP general_inq_lap = {0x9e,0x8b,0x33};
+static const LAP limited_inq_lap = {0x9e,0x8b,0x00};
+
+#if (( BTM_EIR_CLIENT_INCLUDED == TRUE )||( BTM_EIR_SERVER_INCLUDED == TRUE ))
+#ifndef BTM_EIR_UUID_LKUP_TBL
+const UINT16 BTM_EIR_UUID_LKUP_TBL[BTM_EIR_MAX_SERVICES] =
+{
+    UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER,
+/*    UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR,   */
+/*    UUID_SERVCLASS_PUBLIC_BROWSE_GROUP,       */
+    UUID_SERVCLASS_SERIAL_PORT,
+    UUID_SERVCLASS_LAN_ACCESS_USING_PPP,
+    UUID_SERVCLASS_DIALUP_NETWORKING,
+    UUID_SERVCLASS_IRMC_SYNC,
+    UUID_SERVCLASS_OBEX_OBJECT_PUSH,
+    UUID_SERVCLASS_OBEX_FILE_TRANSFER,
+    UUID_SERVCLASS_IRMC_SYNC_COMMAND,
+    UUID_SERVCLASS_HEADSET,
+    UUID_SERVCLASS_CORDLESS_TELEPHONY,
+    UUID_SERVCLASS_AUDIO_SOURCE,
+    UUID_SERVCLASS_AUDIO_SINK,
+    UUID_SERVCLASS_AV_REM_CTRL_TARGET,
+/*    UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION,    */
+    UUID_SERVCLASS_AV_REMOTE_CONTROL,
+/*    UUID_SERVCLASS_VIDEO_CONFERENCING,        */
+    UUID_SERVCLASS_INTERCOM,
+    UUID_SERVCLASS_FAX,
+    UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
+/*    UUID_SERVCLASS_WAP,                       */
+/*    UUID_SERVCLASS_WAP_CLIENT,                */
+    UUID_SERVCLASS_PANU,
+    UUID_SERVCLASS_NAP,
+    UUID_SERVCLASS_GN,
+    UUID_SERVCLASS_DIRECT_PRINTING,
+/*    UUID_SERVCLASS_REFERENCE_PRINTING,        */
+    UUID_SERVCLASS_IMAGING,
+    UUID_SERVCLASS_IMAGING_RESPONDER,
+    UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE,
+    UUID_SERVCLASS_IMAGING_REF_OBJECTS,
+    UUID_SERVCLASS_HF_HANDSFREE,
+    UUID_SERVCLASS_AG_HANDSFREE,
+    UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE,
+/*    UUID_SERVCLASS_REFLECTED_UI,              */
+    UUID_SERVCLASS_BASIC_PRINTING,
+    UUID_SERVCLASS_PRINTING_STATUS,
+    UUID_SERVCLASS_HUMAN_INTERFACE,
+    UUID_SERVCLASS_CABLE_REPLACEMENT,
+    UUID_SERVCLASS_HCRP_PRINT,
+    UUID_SERVCLASS_HCRP_SCAN,
+/*    UUID_SERVCLASS_COMMON_ISDN_ACCESS,        */
+/*    UUID_SERVCLASS_VIDEO_CONFERENCING_GW,     */
+/*    UUID_SERVCLASS_UDI_MT,                    */
+/*    UUID_SERVCLASS_UDI_TA,                    */
+/*    UUID_SERVCLASS_VCP,                       */
+    UUID_SERVCLASS_SAP,
+    UUID_SERVCLASS_PBAP_PCE,
+    UUID_SERVCLASS_PBAP_PSE,
+    UUID_SERVCLASS_PHONE_ACCESS,
+    UUID_SERVCLASS_HEADSET_HS,
+    UUID_SERVCLASS_PNP_INFORMATION,
+/*    UUID_SERVCLASS_GENERIC_NETWORKING,        */
+/*    UUID_SERVCLASS_GENERIC_FILETRANSFER,      */
+/*    UUID_SERVCLASS_GENERIC_AUDIO,             */
+/*    UUID_SERVCLASS_GENERIC_TELEPHONY,         */
+/*    UUID_SERVCLASS_UPNP_SERVICE,              */
+/*    UUID_SERVCLASS_UPNP_IP_SERVICE,           */
+/*    UUID_SERVCLASS_ESDP_UPNP_IP_PAN,          */
+/*    UUID_SERVCLASS_ESDP_UPNP_IP_LAP,          */
+/*    UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP,        */
+    UUID_SERVCLASS_VIDEO_SOURCE,
+    UUID_SERVCLASS_VIDEO_SINK,
+/*    UUID_SERVCLASS_VIDEO_DISTRIBUTION         */
+    UUID_SERVCLASS_MESSAGE_ACCESS,
+    UUID_SERVCLASS_MESSAGE_NOTIFICATION,
+    UUID_SERVCLASS_HDP_SOURCE,
+    UUID_SERVCLASS_HDP_SINK
+};
+#else
+/*
+If customized UUID look-up table needs to be used,
+the followings should be defined in bdroid_buildcfg.h.
+BTM_EIR_UUID_LKUP_TBL = <customized UUID list>
+BTM_EIR_MAX_SERVICES = <number of UUID in list>
+*/
+#if (BTM_EIR_MAX_SERVICES == 0)
+const UINT16 BTM_EIR_UUID_LKUP_TBL[];
+#else
+extern UINT16 BTM_EIR_UUID_LKUP_TBL[BTM_EIR_MAX_SERVICES];
+#endif
+#endif
+#endif /* BTM_EIR_UUID_LKUP_TBL*/
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void         btm_initiate_inquiry (tBTM_INQUIRY_VAR_ST *p_inq);
+static tBTM_STATUS  btm_set_inq_event_filter (UINT8 filter_cond_type, tBTM_INQ_FILT_COND *p_filt_cond);
+static void         btm_clr_inq_result_flt (void);
+
+#if ((BTM_EIR_SERVER_INCLUDED == TRUE)||(BTM_EIR_CLIENT_INCLUDED == TRUE))
+static UINT8        btm_convert_uuid_to_eir_service( UINT16 uuid16 );
+#endif
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+static void         btm_set_eir_uuid( UINT8 *p_eir, tBTM_INQ_RESULTS *p_results );
+static UINT8       *btm_eir_get_uuid_list( UINT8 *p_eir, UINT8 uuid_size,
+                                           UINT8 *p_num_uuid, UINT8 *p_uuid_list_type );
+static UINT16       btm_convert_uuid_to_uuid16( UINT8 *p_uuid, UINT8 uuid_size );
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_SetDiscoverability
+**
+** Description      This function is called to set the device into or out of
+**                  discoverable mode. Discoverable mode means inquiry
+**                  scans are enabled.  If a value of '0' is entered for window or
+**                  interval, the default values are used.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_BUSY if a setting of the filter is already in progress
+**                  BTM_NO_RESOURCES if couldn't get a memory pool buffer
+**                  BTM_ILLEGAL_VALUE if a bad parameter was detected
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetDiscoverability (UINT16 inq_mode, UINT16 window, UINT16 interval)
+{
+    UINT8        scan_mode = 0;
+    UINT16       service_class;
+    UINT8       *p_cod;
+    UINT8        major, minor;
+    DEV_CLASS    cod;
+    LAP          temp_lap[2];
+    BOOLEAN      is_limited;
+    BOOLEAN      cod_limited;
+
+    BTM_TRACE_API0 ("BTM_SetDiscoverability");
+#if (BLE_INCLUDED == TRUE && BLE_INCLUDED == TRUE)
+    if (btm_ble_set_discoverability((UINT16)(inq_mode))
+                        == BTM_SUCCESS)
+    {
+        btm_cb.btm_inq_vars.discoverable_mode &= (~BTM_BLE_DISCOVERABLE_MASK);
+        btm_cb.btm_inq_vars.discoverable_mode |= (inq_mode & BTM_BLE_CONNECTABLE_MASK);
+    }
+    inq_mode &= ~BTM_BLE_DISCOVERABLE_MASK;
+#endif
+
+    /*** Check mode parameter ***/
+    if (inq_mode > BTM_MAX_DISCOVERABLE)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* Make sure the controller is active */
+    if (btm_cb.devcb.state < BTM_DEV_STATE_READY)
+        return (BTM_DEV_RESET);
+
+    /* If the window and/or interval is '0', set to default values */
+    if (!window)
+        window = BTM_DEFAULT_DISC_WINDOW;
+
+    if (!interval)
+        interval = BTM_DEFAULT_DISC_INTERVAL;
+
+    BTM_TRACE_API3 ("BTM_SetDiscoverability: mode %d [NonDisc-0, Lim-1, Gen-2], window 0x%04x, interval 0x%04x",
+                        inq_mode, window, interval);
+
+    /*** Check for valid window and interval parameters ***/
+    /*** Only check window and duration if mode is connectable ***/
+    if (inq_mode != BTM_NON_DISCOVERABLE)
+    {
+        /* window must be less than or equal to interval */
+        if (window < HCI_MIN_INQUIRYSCAN_WINDOW     ||
+            window > HCI_MAX_INQUIRYSCAN_WINDOW     ||
+            interval < HCI_MIN_INQUIRYSCAN_INTERVAL ||
+            interval > HCI_MAX_INQUIRYSCAN_INTERVAL ||
+            window > interval)
+        {
+            return (BTM_ILLEGAL_VALUE);
+        }
+    }
+
+    /* Set the IAC if needed */
+    if (inq_mode != BTM_NON_DISCOVERABLE)
+    {
+        if (inq_mode & BTM_LIMITED_DISCOVERABLE)
+        {
+            /* Use the GIAC and LIAC codes for limited discoverable mode */
+            memcpy (temp_lap[0], limited_inq_lap, LAP_LEN);
+            memcpy (temp_lap[1], general_inq_lap, LAP_LEN);
+
+            if (!btsnd_hcic_write_cur_iac_lap (2, (LAP * const) temp_lap))
+                return (BTM_NO_RESOURCES);  /* Cannot continue */
+        }
+        else
+        {
+            if (!btsnd_hcic_write_cur_iac_lap (1, (LAP * const) &general_inq_lap))
+                return (BTM_NO_RESOURCES);  /* Cannot continue */
+        }
+
+        scan_mode |= HCI_INQUIRY_SCAN_ENABLED;
+    }
+
+    /* Send down the inquiry scan window and period if changed */
+    if ((window != btm_cb.btm_inq_vars.inq_scan_window) ||
+        (interval != btm_cb.btm_inq_vars.inq_scan_period))
+    {
+        if (btsnd_hcic_write_inqscan_cfg (interval, window))
+        {
+            btm_cb.btm_inq_vars.inq_scan_window = window;
+            btm_cb.btm_inq_vars.inq_scan_period = interval;
+        }
+        else
+            return (BTM_NO_RESOURCES);
+    }
+
+    if (btm_cb.btm_inq_vars.connectable_mode & BTM_CONNECTABLE_MASK)
+        scan_mode |= HCI_PAGE_SCAN_ENABLED;
+
+    if (btsnd_hcic_write_scan_enable (scan_mode))
+    {
+        btm_cb.btm_inq_vars.discoverable_mode &= (~BTM_DISCOVERABLE_MASK);
+        btm_cb.btm_inq_vars.discoverable_mode |= inq_mode;
+    }
+    else
+        return (BTM_NO_RESOURCES);
+
+    /* Change the service class bit if mode has changed */
+    p_cod = BTM_ReadDeviceClass();
+    BTM_COD_SERVICE_CLASS(service_class, p_cod);
+    is_limited = (inq_mode & BTM_LIMITED_DISCOVERABLE) ? TRUE : FALSE;
+    cod_limited = (service_class & BTM_COD_SERVICE_LMTD_DISCOVER) ? TRUE : FALSE;
+    if (is_limited ^ cod_limited)
+    {
+        BTM_COD_MINOR_CLASS(minor, p_cod );
+        BTM_COD_MAJOR_CLASS(major, p_cod );
+        if (is_limited)
+            service_class |= BTM_COD_SERVICE_LMTD_DISCOVER;
+        else
+            service_class &= ~BTM_COD_SERVICE_LMTD_DISCOVER;
+
+        FIELDS_TO_COD(cod, minor, major, service_class);
+        (void) BTM_SetDeviceClass (cod);
+    }
+
+    return (BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryScanType
+**
+** Description      This function is called to set the iquiry scan-type to
+**                  standard or interlaced.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_MODE_UNSUPPORTED if not a 1.2 device
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetInquiryScanType (UINT16 scan_type)
+{
+
+    BTM_TRACE_API0 ("BTM_SetInquiryScanType");
+    if (scan_type != BTM_SCAN_TYPE_STANDARD && scan_type != BTM_SCAN_TYPE_INTERLACED)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* whatever app wants if device is not 1.2 scan type should be STANDARD */
+    if (!HCI_LMP_INTERLACED_INQ_SCAN_SUPPORTED(btm_cb.devcb.local_features))
+     return (BTM_MODE_UNSUPPORTED);
+
+    /* Check for scan type if configuration has been changed */
+    if (scan_type != btm_cb.btm_inq_vars.inq_scan_type)
+    {
+        if (BTM_IsDeviceUp())
+        {
+            if (btsnd_hcic_write_inqscan_type ((UINT8)scan_type))
+                btm_cb.btm_inq_vars.inq_scan_type = scan_type;
+            else
+                return (BTM_NO_RESOURCES);
+        }
+        else return (BTM_WRONG_MODE);
+    }
+    return (BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetPageScanType
+**
+** Description      This function is called to set the page scan-type to
+**                  standard or interlaced.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_MODE_UNSUPPORTED if not a 1.2 device
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetPageScanType (UINT16 scan_type)
+{
+    BTM_TRACE_API0 ("BTM_SetPageScanType");
+    if (scan_type != BTM_SCAN_TYPE_STANDARD && scan_type != BTM_SCAN_TYPE_INTERLACED)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* whatever app wants if device is not 1.2 scan type should be STANDARD */
+    if (!HCI_LMP_INTERLACED_PAGE_SCAN_SUPPORTED(btm_cb.devcb.local_features))
+     return (BTM_MODE_UNSUPPORTED);
+
+    /* Check for scan type if configuration has been changed */
+    if (scan_type != btm_cb.btm_inq_vars.page_scan_type)
+    {
+        if (BTM_IsDeviceUp())
+        {
+            if (btsnd_hcic_write_pagescan_type ((UINT8)scan_type))
+                btm_cb.btm_inq_vars.page_scan_type  = scan_type;
+            else
+                return (BTM_NO_RESOURCES);
+        }
+        else return (BTM_WRONG_MODE);
+    }
+    return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryMode
+**
+** Description      This function is called to set standard or with RSSI
+**                  mode of the inquiry for local device.
+**
+** Output Params:   mode - standard, with RSSI, extended
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_NO_RESOURCES if couldn't get a memory pool buffer
+**                  BTM_ILLEGAL_VALUE if a bad parameter was detected
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetInquiryMode (UINT8 mode)
+{
+    BTM_TRACE_API0 ("BTM_SetInquiryMode");
+    if (mode == BTM_INQ_RESULT_STANDARD)
+    {
+        /* mandatory mode */
+    }
+    else if (mode == BTM_INQ_RESULT_WITH_RSSI)
+    {
+    if (!HCI_LMP_INQ_RSSI_SUPPORTED(btm_cb.devcb.local_features))
+        return (BTM_MODE_UNSUPPORTED);
+    }
+#if (( BTM_EIR_CLIENT_INCLUDED == TRUE )||( BTM_EIR_SERVER_INCLUDED == TRUE ))
+    else if (mode == BTM_INQ_RESULT_EXTENDED)
+    {
+        if (!HCI_EXT_INQ_RSP_SUPPORTED(btm_cb.devcb.local_features))
+            return (BTM_MODE_UNSUPPORTED);
+    }
+#endif
+    else
+        return (BTM_ILLEGAL_VALUE);
+
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    if (!btsnd_hcic_write_inquiry_mode (mode))
+        return (BTM_NO_RESOURCES);
+
+    return (BTM_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDiscoverability
+**
+** Description      This function is called to read the current discoverability
+**                  mode of the device.
+**
+** Output Params:   p_window - current inquiry scan duration
+**                  p_interval - current inquiry scan interval
+**
+** Returns          BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or
+**                  BTM_GENERAL_DISCOVERABLE
+**
+*******************************************************************************/
+UINT16 BTM_ReadDiscoverability (UINT16 *p_window, UINT16 *p_interval)
+{
+    BTM_TRACE_API0 ("BTM_ReadDiscoverability");
+    if (p_window)
+        *p_window = btm_cb.btm_inq_vars.inq_scan_window;
+
+    if (p_interval)
+        *p_interval = btm_cb.btm_inq_vars.inq_scan_period;
+
+    return (btm_cb.btm_inq_vars.discoverable_mode);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPeriodicInquiryMode
+**
+** Description      This function is called to set the device periodic inquiry mode.
+**                  If the duration is zero, the periodic inquiry mode is cancelled.
+**
+**                  Note: We currently do not allow concurrent inquiry and periodic inquiry.
+**
+** Parameters:      p_inqparms - pointer to the inquiry information
+**                      mode - GENERAL or LIMITED inquiry
+**                      duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED)
+**                      max_resps - maximum amount of devices to search for before ending the inquiry
+**                      filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or
+**                                         BTM_FILTER_COND_BD_ADDR
+**                      filter_cond - value for the filter (based on filter_cond_type)
+**
+**                  max_delay - maximum amount of time between successive inquiries
+**                  min_delay - minimum amount of time between successive inquiries
+**                  p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully started
+**                  BTM_ILLEGAL_VALUE if a bad parameter is detected
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_SUCCESS - if cancelling the periodic inquiry
+**                  BTM_BUSY - if an inquiry is already active
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetPeriodicInquiryMode (tBTM_INQ_PARMS *p_inqparms, UINT16 max_delay,
+                                        UINT16 min_delay, tBTM_INQ_RESULTS_CB *p_results_cb)
+{
+    tBTM_STATUS  status;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    BTM_TRACE_API6 ("BTM_SetPeriodicInquiryMode: mode: %d, dur: %d, rsps: %d, flt: %d, min: %d, max: %d",
+        p_inqparms->mode, p_inqparms->duration, p_inqparms->max_resps,
+        p_inqparms->filter_cond_type, min_delay, max_delay);
+
+    /*** Make sure the device is ready ***/
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    /* Only one active inquiry is allowed in this implementation.
+       Also do not allow an inquiry if the inquiry filter is being updated */
+    if (p_inq->inq_active || p_inq->inqfilt_active)
+        return (BTM_BUSY);
+
+    /* If illegal parameters return FALSE */
+    if (p_inqparms->mode != BTM_GENERAL_INQUIRY &&
+        p_inqparms->mode != BTM_LIMITED_INQUIRY)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* Verify the parameters for this command */
+    if (p_inqparms->duration < BTM_MIN_INQUIRY_LEN     ||
+        p_inqparms->duration > BTM_MAX_INQUIRY_LENGTH  ||
+        min_delay <= p_inqparms->duration              ||
+        min_delay < BTM_PER_INQ_MIN_MIN_PERIOD         ||
+        min_delay > BTM_PER_INQ_MAX_MIN_PERIOD         ||
+        max_delay <= min_delay                         ||
+        max_delay < BTM_PER_INQ_MIN_MAX_PERIOD         ||
+        max_delay > BTM_PER_INQ_MAX_MAX_PERIOD)
+    {
+        return (BTM_ILLEGAL_VALUE);
+    }
+
+    /* Save the inquiry parameters to be used upon the completion of setting/clearing the inquiry filter */
+    p_inq->inqparms = *p_inqparms;
+    p_inq->per_min_delay = min_delay;
+    p_inq->per_max_delay = max_delay;
+    p_inq->inq_cmpl_info.num_resp = 0;         /* Clear the results counter */
+    p_inq->p_inq_results_cb = p_results_cb;
+
+    p_inq->inq_active = (UINT8)((p_inqparms->mode == BTM_LIMITED_INQUIRY) ?
+                            (BTM_LIMITED_INQUIRY_ACTIVE | BTM_PERIODIC_INQUIRY_ACTIVE) :
+                            (BTM_GENERAL_INQUIRY_ACTIVE | BTM_PERIODIC_INQUIRY_ACTIVE));
+
+#if (defined(BTM_BYPASS_EVENT_FILTERING) && BTM_BYPASS_EVENT_FILTERING == TRUE)
+    BTM_TRACE_WARNING0("BTM: Bypassing event filtering...");
+
+    p_inq->state = BTM_INQ_ACTIVE_STATE;
+    p_inq->inqfilt_active = FALSE;
+    btm_initiate_inquiry (p_inq);
+    status = BTM_CMD_STARTED;
+#else
+    /* If a filter is specified, then save it for later and clear the current filter.
+       The setting of the filter is done upon completion of clearing of the previous
+       filter.
+    */
+    if (p_inqparms->filter_cond_type != BTM_CLR_INQUIRY_FILTER)
+    {
+        p_inq->state = BTM_INQ_CLR_FILT_STATE;
+        p_inqparms->filter_cond_type = BTM_CLR_INQUIRY_FILTER;
+    }
+    else    /* The filter is not being used so simply clear it; the inquiry can start after this operation */
+        p_inq->state = BTM_INQ_SET_FILT_STATE;
+
+    /* Before beginning the inquiry the current filter must be cleared, so initiate the command */
+    if ((status = btm_set_inq_event_filter (p_inqparms->filter_cond_type, &p_inqparms->filter_cond)) != BTM_CMD_STARTED)
+    {
+        /* If set filter command is not succesful reset the state */
+        p_inq->p_inq_results_cb = NULL;
+        p_inq->state = BTM_INQ_INACTIVE_STATE;
+
+    }
+
+#endif
+    return (status);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelPeriodicInquiry
+**
+** Description      This function cancels a periodic inquiry
+**
+** Returns
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_SUCCESS - if cancelling the periodic inquiry
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_CancelPeriodicInquiry(void)
+{
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+    tBTM_STATUS          status = BTM_SUCCESS;
+    BTM_TRACE_API0 ("BTM_CancelPeriodicInquiry called");
+
+    /*** Make sure the device is ready ***/
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    /* Only cancel if one is active */
+    if (btm_cb.btm_inq_vars.inq_active & BTM_PERIODIC_INQUIRY_ACTIVE)
+    {
+        btm_cb.btm_inq_vars.inq_active = BTM_INQUIRY_INACTIVE;
+        btm_cb.btm_inq_vars.p_inq_results_cb = (tBTM_INQ_RESULTS_CB *) NULL;
+
+        if (!btsnd_hcic_exit_per_inq ())
+            status = BTM_NO_RESOURCES;
+
+        /* If the event filter is in progress, mark it so that the processing of the return
+           event will be ignored */
+        if(p_inq->inqfilt_active)
+            p_inq->pending_filt_complete_event++;
+
+        p_inq->inqfilt_active = FALSE;
+        p_inq->inq_counter++;
+    }
+
+    return (status);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetConnectability
+**
+** Description      This function is called to set the device into or out of
+**                  connectable mode. Discoverable mode means page scans enabled.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_ILLEGAL_VALUE if a bad parameter is detected
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetConnectability (UINT16 page_mode, UINT16 window, UINT16 interval)
+{
+    UINT8    scan_mode = 0;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    BTM_TRACE_API0 ("BTM_SetConnectability");
+
+#if (BLE_INCLUDED == TRUE && BLE_INCLUDED == TRUE)
+    if (btm_ble_set_connectability(page_mode) == BTM_SUCCESS)
+    {
+        p_inq->connectable_mode &= (~BTM_BLE_CONNECTABLE_MASK);
+        p_inq->connectable_mode |= (page_mode & BTM_BLE_CONNECTABLE_MASK);
+    }
+    page_mode &= ~BTM_BLE_CONNECTABLE_MASK;
+
+#endif
+
+    /*** Check mode parameter ***/
+    if (page_mode != BTM_NON_CONNECTABLE && page_mode != BTM_CONNECTABLE)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* Make sure the controller is active */
+    if (btm_cb.devcb.state < BTM_DEV_STATE_READY)
+        return (BTM_DEV_RESET);
+
+    /* If the window and/or interval is '0', set to default values */
+    if (!window)
+        window = BTM_DEFAULT_CONN_WINDOW;
+
+    if (!interval)
+        interval = BTM_DEFAULT_CONN_INTERVAL;
+
+    BTM_TRACE_API3 ("BTM_SetConnectability: mode %d [NonConn-0, Conn-1], window 0x%04x, interval 0x%04x",
+                        page_mode, window, interval);
+
+    /*** Check for valid window and interval parameters ***/
+    /*** Only check window and duration if mode is connectable ***/
+    if (page_mode == BTM_CONNECTABLE)
+    {
+        /* window must be less than or equal to interval */
+        if (window < HCI_MIN_PAGESCAN_WINDOW     ||
+            window > HCI_MAX_PAGESCAN_WINDOW     ||
+            interval < HCI_MIN_PAGESCAN_INTERVAL ||
+            interval > HCI_MAX_PAGESCAN_INTERVAL ||
+            window > interval)
+        {
+            return (BTM_ILLEGAL_VALUE);
+        }
+
+        scan_mode |= HCI_PAGE_SCAN_ENABLED;
+    }
+
+    if ((window != p_inq->page_scan_window) ||
+        (interval != p_inq->page_scan_period))
+    {
+        p_inq->page_scan_window = window;
+        p_inq->page_scan_period = interval;
+        if (!btsnd_hcic_write_pagescan_cfg (interval, window))
+            return (BTM_NO_RESOURCES);
+    }
+
+    /* Keep the inquiry scan as previouosly set */
+    if (p_inq->discoverable_mode & BTM_DISCOVERABLE_MASK)
+        scan_mode |= HCI_INQUIRY_SCAN_ENABLED;
+
+    if (btsnd_hcic_write_scan_enable (scan_mode))
+    {
+        p_inq->connectable_mode &= (~BTM_CONNECTABLE_MASK);
+        p_inq->connectable_mode |= page_mode;
+
+        return (BTM_SUCCESS);
+    }
+
+    return (BTM_NO_RESOURCES);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadConnectability
+**
+** Description      This function is called to read the current discoverability
+**                  mode of the device.
+** Output Params    p_window - current page scan duration
+**                  p_interval - current time between page scans
+**
+** Returns          BTM_NON_CONNECTABLE or BTM_CONNECTABLE
+**
+*******************************************************************************/
+UINT16 BTM_ReadConnectability (UINT16 *p_window, UINT16 *p_interval)
+{
+    BTM_TRACE_API0 ("BTM_ReadConnectability");
+    if (p_window)
+        *p_window = btm_cb.btm_inq_vars.page_scan_window;
+
+    if (p_interval)
+        *p_interval = btm_cb.btm_inq_vars.page_scan_period;
+
+    return (btm_cb.btm_inq_vars.connectable_mode);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_IsInquiryActive
+**
+** Description      This function returns a bit mask of the current inquiry state
+**
+** Returns          BTM_INQUIRY_INACTIVE if inactive (0)
+**                  BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active
+**                  BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active
+**                  BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
+**
+*******************************************************************************/
+UINT16 BTM_IsInquiryActive (void)
+{
+    BTM_TRACE_API0 ("BTM_IsInquiryActive");
+
+    return(btm_cb.btm_inq_vars.inq_active);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelInquiry
+**
+** Description      This function cancels an inquiry if active
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_CancelInquiry(void)
+{
+    tBTM_STATUS           status = BTM_SUCCESS;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    BTM_TRACE_API0 ("BTM_CancelInquiry called");
+
+    /*** Make sure the device is ready ***/
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    /* Only cancel if not in periodic mode, otherwise the caller should call BTM_CancelPeriodicMode */
+    if (p_inq->inq_active &&
+        (!(p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE)))
+    {
+        p_inq->inq_active = BTM_INQUIRY_INACTIVE;
+        p_inq->state = BTM_INQ_INACTIVE_STATE;
+        p_inq->p_inq_results_cb = (tBTM_INQ_RESULTS_CB *) NULL; /* Do not notify caller anymore */
+        p_inq->p_inq_cmpl_cb = (tBTM_CMPL_CB *) NULL;    /* Do not notify caller anymore */
+
+        /* If the event filter is in progress, mark it so that the processing of the return
+            event will be ignored */
+        if (p_inq->inqfilt_active)
+        {
+            p_inq->inqfilt_active = FALSE;
+            p_inq->pending_filt_complete_event++;
+        }
+         /* Initiate the cancel inquiry */
+        else
+        {
+            if (!btsnd_hcic_inq_cancel())
+                status = BTM_NO_RESOURCES;
+#if BLE_INCLUDED == TRUE
+            if ((p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK) != 0)
+                btm_ble_stop_scan();
+#endif
+        }
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+        /* Do not send the BUSY_LEVEL event yet. Wait for the cancel_complete event
+         * and then send the BUSY_LEVEL event
+         * btm_acl_update_busy_level (BTM_BLI_INQ_DONE_EVT);
+         */
+#endif
+
+        p_inq->inq_counter++;
+        btm_clr_inq_result_flt();
+    }
+
+    return (status);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_StartInquiry
+**
+** Description      This function is called to start an inquiry.
+**
+** Parameters:      p_inqparms - pointer to the inquiry information
+**                      mode - GENERAL or LIMITED inquiry
+**                      duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED)
+**                      max_resps - maximum amount of devices to search for before ending the inquiry
+**                      filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or
+**                                         BTM_FILTER_COND_BD_ADDR
+**                      filter_cond - value for the filter (based on filter_cond_type)
+**
+**                  p_results_cb   - Pointer to the callback routine which gets called
+**                                upon receipt of an inquiry result. If this field is
+**                                NULL, the application is not notified.
+**
+**                  p_cmpl_cb   - Pointer to the callback routine which gets called
+**                                upon completion.  If this field is NULL, the
+**                                application is not notified when completed.
+** Returns          tBTM_STATUS
+**                  BTM_CMD_STARTED if successfully initiated
+**                  BTM_BUSY if already in progress
+**                  BTM_ILLEGAL_VALUE if parameter(s) are out of range
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_StartInquiry (tBTM_INQ_PARMS *p_inqparms, tBTM_INQ_RESULTS_CB *p_results_cb,
+                              tBTM_CMPL_CB *p_cmpl_cb)
+{
+    tBTM_STATUS  status;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    BTM_TRACE_API4 ("BTM_StartInquiry: mode: %d, dur: %d, rsps: %d, flt: %d",
+                        p_inqparms->mode, p_inqparms->duration, p_inqparms->max_resps,
+                        p_inqparms->filter_cond_type);
+
+    /* Only one active inquiry is allowed in this implementation.
+       Also do not allow an inquiry if the inquiry filter is being updated */
+    if (p_inq->inq_active || p_inq->inqfilt_active)
+        return (BTM_BUSY);
+
+        /*** Make sure the device is ready ***/
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+    if ((p_inqparms->mode & BTM_BR_INQUIRY_MASK)!= BTM_GENERAL_INQUIRY &&
+        (p_inqparms->mode & BTM_BR_INQUIRY_MASK)!= BTM_LIMITED_INQUIRY)
+        return (BTM_ILLEGAL_VALUE);
+
+    /* Save the inquiry parameters to be used upon the completion of setting/clearing the inquiry filter */
+    p_inq->inqparms = *p_inqparms;
+#if (BLE_INCLUDED == TRUE)
+    p_inq->inqparms.mode = (UINT8)(p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK) | (UINT8)(1 << (p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+#else
+    p_inq->inqparms.mode = (UINT8)(1 << (p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+#endif
+
+    /* Initialize the inquiry variables */
+    p_inq->state = BTM_INQ_ACTIVE_STATE;
+    p_inq->p_inq_cmpl_cb = p_cmpl_cb;
+    p_inq->p_inq_results_cb = p_results_cb;
+    p_inq->inq_cmpl_info.num_resp = 0;         /* Clear the results counter */
+    p_inq->inq_active = (UINT8)(1 << (p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+
+    BTM_TRACE_DEBUG1("BTM_StartInquiry: p_inq->inq_active = 0x%02x", p_inq->inq_active);
+
+/* start LE inquiry here if requested */
+#if BLE_INCLUDED == TRUE
+    if (p_inqparms->mode & BTM_BLE_INQUIRY_MASK)
+    {
+        /* BLE for now does not support filter condition for inquiry */
+        if (btm_ble_start_inquiry((UINT8)(p_inqparms->mode & BTM_BLE_INQUIRY_MASK),
+                        p_inq->inqparms.duration) != BTM_SUCCESS)
+        {
+            BTM_TRACE_ERROR0("Err Starting LE Inquiry.");
+            p_inq->inqparms.mode &= ~ BTM_BLE_INQUIRY_MASK;
+        }
+
+        p_inqparms->mode &= ~BTM_BLE_INQUIRY_MASK;
+
+        BTM_TRACE_DEBUG1("BTM_StartInquiry: mode = %02x", p_inqparms->mode);
+    }
+#endif /* end of BLE_INCLUDED */
+
+#if (defined(BTM_BYPASS_EVENT_FILTERING) && BTM_BYPASS_EVENT_FILTERING == TRUE)
+    BTM_TRACE_WARNING0("BTM: Bypassing event filtering...");
+    p_inq->inqfilt_active = FALSE;
+    btm_initiate_inquiry (p_inq);
+    status = BTM_CMD_STARTED;
+#else
+    /* If a filter is specified, then save it for later and clear the current filter.
+       The setting of the filter is done upon completion of clearing of the previous
+       filter.
+    */
+    switch (p_inqparms->filter_cond_type)
+    {
+    case BTM_CLR_INQUIRY_FILTER:
+        p_inq->state = BTM_INQ_SET_FILT_STATE;
+        break;
+
+    case BTM_FILTER_COND_DEVICE_CLASS:
+    case BTM_FILTER_COND_BD_ADDR:
+        /* The filter is not being used so simply clear it;
+            the inquiry can start after this operation */
+        p_inq->state = BTM_INQ_CLR_FILT_STATE;
+        p_inqparms->filter_cond_type = BTM_CLR_INQUIRY_FILTER;
+        /* =============>>>> adding LE filtering here ????? */
+        break;
+
+    default:
+        return (BTM_ILLEGAL_VALUE);
+    }
+
+    /* Before beginning the inquiry the current filter must be cleared, so initiate the command */
+    if ((status = btm_set_inq_event_filter (p_inqparms->filter_cond_type, &p_inqparms->filter_cond)) != BTM_CMD_STARTED)
+        p_inq->state = BTM_INQ_INACTIVE_STATE;
+#endif
+    return (status);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteDeviceName
+**
+** Description      This function initiates a remote device HCI command to the
+**                  controller and calls the callback when the process has completed.
+**
+** Input Params:    remote_bda      - device address of name to retrieve
+**                  p_cb            - callback function called when BTM_CMD_STARTED
+**                                    is returned.
+**                                    A pointer to tBTM_REMOTE_DEV_NAME is passed to the
+**                                    callback.
+**
+** Returns
+**                  BTM_CMD_STARTED is returned if the request was successfully sent
+**                                  to HCI.
+**                  BTM_BUSY if already in progress
+**                  BTM_UNKNOWN_ADDR if device address is bad
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS  BTM_ReadRemoteDeviceName (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb)
+{
+    tBTM_INQ_INFO   *p_cur = NULL;
+    tINQ_DB_ENT     *p_i;
+
+#if BLE_INCLUDED == TRUE
+    tBT_DEVICE_TYPE dev_type;
+    tBLE_ADDR_TYPE  addr_type;
+#endif
+
+    BTM_TRACE_API6 ("BTM_ReadRemoteDeviceName: bd addr [%02x%02x%02x%02x%02x%02x]",
+               remote_bda[0], remote_bda[1], remote_bda[2],
+               remote_bda[3], remote_bda[4], remote_bda[5]);
+
+    /* Use the remote device's clock offset if it is in the local inquiry database */
+    if ((p_i = btm_inq_db_find (remote_bda)) != NULL)
+    {
+        p_cur = &p_i->inq_info;
+
+#if (BTM_INQ_GET_REMOTE_NAME == TRUE)
+        p_cur->remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+#endif
+    }
+    BTM_TRACE_API0 ("no device found in inquiry db");
+
+#if (BLE_INCLUDED == TRUE)
+    BTM_ReadDevInfo(remote_bda, &dev_type, &addr_type);
+    if (dev_type == BT_DEVICE_TYPE_BLE)
+    {
+        return btm_ble_read_remote_name(remote_bda, p_cur, p_cb);
+    }
+    else
+#endif
+
+    return (btm_initiate_rem_name (remote_bda, p_cur, BTM_RMT_NAME_EXT,
+                                   BTM_EXT_RMT_NAME_TIMEOUT, p_cb));
+}
+
+/*******************************************************************************
+**
+** Function         BTM_CancelRemoteDeviceName
+**
+** Description      This function initiates the cancel request for the specified
+**                  remote device.
+**
+** Input Params:    None
+**
+** Returns
+**                  BTM_CMD_STARTED is returned if the request was successfully sent
+**                                  to HCI.
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if there is not an active remote name request.
+**
+*******************************************************************************/
+tBTM_STATUS  BTM_CancelRemoteDeviceName (void)
+{
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+#if BLE_INCLUDED == TRUE
+    tBT_DEVICE_TYPE dev_type;
+    tBLE_ADDR_TYPE  addr_type;
+#endif
+
+    BTM_TRACE_API0 ("BTM_CancelRemoteDeviceName()");
+
+    /* Make sure there is not already one in progress */
+    if (p_inq->remname_active)
+    {
+#if BLE_INCLUDED == TRUE
+        BTM_ReadDevInfo(p_inq->remname_bda, &dev_type, &addr_type);
+        if (dev_type == BT_DEVICE_TYPE_BLE)
+        {
+            if (btm_ble_cancel_remote_name(p_inq->remname_bda))
+                return (BTM_CMD_STARTED);
+            else
+                return (BTM_UNKNOWN_ADDR);
+        }
+        else
+#endif
+        if (btsnd_hcic_rmt_name_req_cancel (p_inq->remname_bda))
+            return (BTM_CMD_STARTED);
+        else
+            return (BTM_NO_RESOURCES);
+    }
+    else
+        return (BTM_WRONG_MODE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_InqFirstResult
+**
+** Description      This function looks through the inquiry database for the first
+**                  used entrysince the LAST inquiry. This is used in conjunction
+**                  with BTM_InqNext by applications as a way to walk through the
+**                  inquiry results database.
+**
+** Returns          pointer to first in-use entry, or NULL if DB is empty
+**
+*******************************************************************************/
+tBTM_INQ_INFO *BTM_InqFirstResult (void)
+{
+    UINT16       xx;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+    UINT32       cur_inq_count = btm_cb.btm_inq_vars.inq_counter - 1;
+
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if (p_ent->in_use && p_ent->inq_count == cur_inq_count)
+            return (&p_ent->inq_info);
+    }
+
+    /* If here, no used entry found */
+    return ((tBTM_INQ_INFO *)NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqNextResult
+**
+** Description      This function looks through the inquiry database for the next
+**                  used entrysince the LAST inquiry. If the input parameter is NULL,
+**                  the first entry is returned.
+**
+** Returns          pointer to next in-use entry, or NULL if no more found.
+**
+*******************************************************************************/
+tBTM_INQ_INFO *BTM_InqNextResult (tBTM_INQ_INFO *p_cur)
+{
+    tINQ_DB_ENT  *p_ent;
+    UINT16        inx;
+    UINT32        cur_inq_count = btm_cb.btm_inq_vars.inq_counter - 1;
+
+    if (p_cur)
+    {
+        p_ent = (tINQ_DB_ENT *) ((UINT8 *)p_cur - offsetof (tINQ_DB_ENT, inq_info));
+        inx = (UINT16)((p_ent - btm_cb.btm_inq_vars.inq_db) + 1);
+
+        for (p_ent = &btm_cb.btm_inq_vars.inq_db[inx]; inx < BTM_INQ_DB_SIZE; inx++, p_ent++)
+        {
+            if (p_ent->in_use && p_ent->inq_count == cur_inq_count)
+                return (&p_ent->inq_info);
+        }
+
+        /* If here, more entries found */
+        return ((tBTM_INQ_INFO *)NULL);
+    }
+    else
+        return (BTM_InqDbFirst());
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbRead
+**
+** Description      This function looks through the inquiry database for a match
+**                  based on Bluetooth Device Address. This is the application's
+**                  interface to get the inquiry details of a specific BD address.
+**
+** Returns          pointer to entry, or NULL if not found
+**
+*******************************************************************************/
+tBTM_INQ_INFO *BTM_InqDbRead (BD_ADDR p_bda)
+{
+    UINT16       xx;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+
+    BTM_TRACE_API6 ("BTM_InqDbRead: bd addr [%02x%02x%02x%02x%02x%02x]",
+               p_bda[0], p_bda[1], p_bda[2], p_bda[3], p_bda[4], p_bda[5]);
+
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if ((p_ent->in_use) && (!memcmp (p_ent->inq_info.results.remote_bd_addr, p_bda, BD_ADDR_LEN)))
+            return (&p_ent->inq_info);
+    }
+
+    /* If here, not found */
+    return ((tBTM_INQ_INFO *)NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbFirst
+**
+** Description      This function looks through the inquiry database for the first
+**                  used entry, and returns that. This is used in conjunction with
+**                  BTM_InqDbNext by applications as a way to walk through the
+**                  inquiry database.
+**
+** Returns          pointer to first in-use entry, or NULL if DB is empty
+**
+*******************************************************************************/
+tBTM_INQ_INFO *BTM_InqDbFirst (void)
+{
+    UINT16       xx;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if (p_ent->in_use)
+            return (&p_ent->inq_info);
+    }
+
+    /* If here, no used entry found */
+    return ((tBTM_INQ_INFO *)NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbNext
+**
+** Description      This function looks through the inquiry database for the next
+**                  used entry, and returns that.  If the input parameter is NULL,
+**                  the first entry is returned.
+**
+** Returns          pointer to next in-use entry, or NULL if no more found.
+**
+*******************************************************************************/
+tBTM_INQ_INFO *BTM_InqDbNext (tBTM_INQ_INFO *p_cur)
+{
+    tINQ_DB_ENT  *p_ent;
+    UINT16        inx;
+
+    if (p_cur)
+    {
+        p_ent = (tINQ_DB_ENT *) ((UINT8 *)p_cur - offsetof (tINQ_DB_ENT, inq_info));
+        inx = (UINT16)((p_ent - btm_cb.btm_inq_vars.inq_db) + 1);
+
+        for (p_ent = &btm_cb.btm_inq_vars.inq_db[inx]; inx < BTM_INQ_DB_SIZE; inx++, p_ent++)
+        {
+            if (p_ent->in_use)
+                return (&p_ent->inq_info);
+        }
+
+        /* If here, more entries found */
+        return ((tBTM_INQ_INFO *)NULL);
+    }
+    else
+        return (BTM_InqDbFirst());
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ClearInqDb
+**
+** Description      This function is called to clear out a device or all devices
+**                  from the inquiry database.
+**
+** Parameter        p_bda - (input) BD_ADDR ->  Address of device to clear
+**                                              (NULL clears all entries)
+**
+** Returns          BTM_BUSY if an inquiry, get remote name, or event filter
+**                          is active, otherwise BTM_SUCCESS
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ClearInqDb (BD_ADDR p_bda)
+{
+    tBTM_INQUIRY_VAR_ST     *p_inq = &btm_cb.btm_inq_vars;
+
+    /* If an inquiry or remote name is in progress return busy */
+    if (p_inq->inq_active != BTM_INQUIRY_INACTIVE ||
+        p_inq->inqfilt_active)
+        return (BTM_BUSY);
+
+    btm_clr_inq_db(p_bda);
+
+    return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadNumInqDbEntries
+**
+** Returns          This function returns the number of entries in the inquiry database.
+**
+*******************************************************************************/
+UINT8 BTM_ReadNumInqDbEntries (void)
+{
+    UINT8         num_entries;
+    UINT8         num_results;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+
+    for (num_entries = 0, num_results = 0; num_entries < BTM_INQ_DB_SIZE; num_entries++, p_ent++)
+    {
+        if (p_ent->in_use)
+            num_results++;
+    }
+
+    return (num_results);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_InquiryRegisterForChanges
+**
+** Returns          This function is called to register a callback for when the
+**                  inquiry database changes, i.e. new entry or entry deleted.
+**
+*******************************************************************************/
+tBTM_STATUS  BTM_InquiryRegisterForChanges (tBTM_INQ_DB_CHANGE_CB *p_cb)
+{
+    if (!p_cb)
+        btm_cb.btm_inq_vars.p_inq_change_cb = NULL;
+    else if (btm_cb.btm_inq_vars.p_inq_change_cb)
+        return (BTM_BUSY);
+    else
+        btm_cb.btm_inq_vars.p_inq_change_cb = p_cb;
+
+    return (BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryFilterCallback
+**
+** Description      Host can register to be asked whenever an inquiry result
+**                  is received.  If host does not like the device no name
+**                  request is issued for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetInquiryFilterCallback (tBTM_FILTER_CB *p_callback)
+{
+    btm_cb.p_inq_filter_cb = p_callback;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadInquiryRspTxPower
+**
+** Description      This command will read the inquiry Transmit Power level used
+**                  to transmit the FHS and EIR data packets.
+**                  This can be used directly in the Tx Power Level EIR data type.
+**
+** Returns          BTM_SUCCESS if successful
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadInquiryRspTxPower (tBTM_CMPL_CB *p_cb)
+{
+    if (btm_cb.devcb.p_txpwer_cmpl_cb)
+        return (BTM_BUSY);
+
+     btu_start_timer (&btm_cb.devcb.txpwer_timer, BTU_TTYPE_BTM_ACL, BTM_INQ_REPLY_TIMEOUT );
+
+
+    btm_cb.devcb.p_txpwer_cmpl_cb = p_cb;
+
+    if (!btsnd_hcic_read_inq_tx_power ())
+    {
+        btm_cb.devcb.p_txpwer_cmpl_cb = NULL;
+        btu_stop_timer (&btm_cb.devcb.txpwer_timer);
+        return (BTM_NO_RESOURCES);
+    }
+    else
+        return (BTM_CMD_STARTED);
+}
+/*******************************************************************************
+**
+** Function         BTM_WriteInquiryTxPower
+**
+** Description      This command is used to write the inquiry transmit power level
+**                  used to transmit the inquiry (ID) data packets. The Controller
+**                  should use the supported TX power level closest to the Tx_Power
+**                  parameter.
+**
+** Returns          BTM_SUCCESS if successful
+**
+*******************************************************************************/
+tBTM_STATUS  BTM_WriteInquiryTxPower (INT8 tx_power)
+{
+    tBTM_STATUS status = BTM_SUCCESS;
+
+    if (tx_power < BTM_MIN_INQ_TX_POWER || tx_power > BTM_MAX_INQ_TX_POWER)
+    {
+        status = BTM_ILLEGAL_VALUE;
+    }
+    else if (!btsnd_hcic_write_inq_tx_power(tx_power))
+        status = BTM_NO_RESOURCES;
+
+    return status;
+}
+/*********************************************************************************
+**********************************************************************************
+**                                                                              **
+**                      BTM Internal Inquiry Functions                          **
+**                                                                              **
+**********************************************************************************
+*********************************************************************************/
+/*******************************************************************************
+**
+** Function         btm_inq_db_reset
+**
+** Description      This function is called at at reset to clear the inquiry
+**                  database & pending callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_inq_db_reset (void)
+{
+    tBTM_REMOTE_DEV_NAME     rem_name;
+    tBTM_INQUIRY_VAR_ST     *p_inq = &btm_cb.btm_inq_vars;
+    UINT8                    num_responses;
+    UINT8                    temp_inq_active;
+    tBTM_STATUS              status;
+
+    btu_stop_timer (&p_inq->inq_timer_ent);
+
+    /* If an inquiry or periodic inquiry is active, reset the mode to inactive */
+    if (p_inq->inq_active != BTM_INQUIRY_INACTIVE)
+    {
+        temp_inq_active = p_inq->inq_active;    /* Save so state can change BEFORE
+                                                       callback is called */
+        p_inq->inq_active = BTM_INQUIRY_INACTIVE;
+
+        /* If not a periodic inquiry, the complete callback must be called to notify caller */
+        if (temp_inq_active == BTM_LIMITED_INQUIRY_ACTIVE ||
+            temp_inq_active == BTM_GENERAL_INQUIRY_ACTIVE)
+        {
+            if (p_inq->p_inq_cmpl_cb)
+            {
+                num_responses = 0;
+                (*p_inq->p_inq_cmpl_cb)(&num_responses);
+            }
+        }
+    }
+
+    /* Cancel a remote name request if active, and notify the caller (if waiting) */
+    if (p_inq->remname_active )
+    {
+        btu_stop_timer (&p_inq->rmt_name_timer_ent);
+        p_inq->remname_active = FALSE;
+        memset(p_inq->remname_bda, 0, BD_ADDR_LEN);
+
+        if (p_inq->p_remname_cmpl_cb)
+        {
+            rem_name.status = BTM_DEV_RESET;
+
+            (*p_inq->p_remname_cmpl_cb)(&rem_name);
+            p_inq->p_remname_cmpl_cb = NULL;
+        }
+    }
+
+    /* Cancel an inquiry filter request if active, and notify the caller (if waiting) */
+    if (p_inq->inqfilt_active)
+    {
+        p_inq->inqfilt_active = FALSE;
+
+        if (p_inq->p_inqfilter_cmpl_cb)
+        {
+            status = BTM_DEV_RESET;
+            (*p_inq->p_inqfilter_cmpl_cb)(&status);
+        }
+    }
+
+    p_inq->state = BTM_INQ_INACTIVE_STATE;
+    p_inq->pending_filt_complete_event = 0;
+    p_inq->p_inq_results_cb = NULL;
+    btm_clr_inq_db(NULL);   /* Clear out all the entries in the database */
+    btm_clr_inq_result_flt();
+
+    p_inq->discoverable_mode = BTM_NON_DISCOVERABLE;
+    p_inq->connectable_mode  = BTM_NON_CONNECTABLE;
+    p_inq->page_scan_type    = BTM_SCAN_TYPE_STANDARD;
+    p_inq->inq_scan_type     = BTM_SCAN_TYPE_STANDARD;
+
+#if BLE_INCLUDED == TRUE
+    p_inq->discoverable_mode |= BTM_BLE_NON_DISCOVERABLE;
+    p_inq->connectable_mode  |= BTM_BLE_NON_CONNECTABLE;
+#endif
+    return;
+}
+
+
+/*********************************************************************************
+**
+** Function         btm_inq_db_init
+**
+** Description      This function is called at startup to initialize the inquiry
+**                  database.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_inq_db_init (void)
+{
+#if 0  /* cleared in btm_init; put back in if called from anywhere else! */
+    memset (&btm_cb.btm_inq_vars, 0, sizeof (tBTM_INQUIRY_VAR_ST));
+#endif
+    btm_cb.btm_inq_vars.no_inc_ssp = BTM_NO_SSP_ON_INQUIRY;
+}
+
+/*********************************************************************************
+**
+** Function         btm_inq_stop_on_ssp
+**
+** Description      This function is called on incoming SSP
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_inq_stop_on_ssp(void)
+{
+    UINT8 normal_active = (BTM_GENERAL_INQUIRY_ACTIVE|BTM_LIMITED_INQUIRY_ACTIVE);
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG4 ("btm_inq_stop_on_ssp: no_inc_ssp=%d inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.no_inc_ssp, btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+    if (btm_cb.btm_inq_vars.no_inc_ssp)
+    {
+        if (btm_cb.btm_inq_vars.state == BTM_INQ_ACTIVE_STATE)
+        {
+            if (btm_cb.btm_inq_vars.inq_active & BTM_PERIODIC_INQUIRY_ACTIVE)
+            {
+                BTM_CancelPeriodicInquiry();
+            }
+            else if (btm_cb.btm_inq_vars.inq_active & normal_active)
+            {
+                /* can not call BTM_CancelInquiry() here. We need to report inquiry complete evt */
+                btsnd_hcic_inq_cancel();
+            }
+        }
+        /* do not allow inquiry to start */
+        btm_cb.btm_inq_vars.inq_active |= BTM_SSP_INQUIRY_ACTIVE;
+    }
+}
+
+/*********************************************************************************
+**
+** Function         btm_inq_clear_ssp
+**
+** Description      This function is called when pairing_state becomes idle
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_inq_clear_ssp(void)
+{
+    btm_cb.btm_inq_vars.inq_active &= ~BTM_SSP_INQUIRY_ACTIVE;
+}
+
+/*********************************************************************************
+**
+** Function         btm_clr_inq_db
+**
+** Description      This function is called to clear out a device or all devices
+**                  from the inquiry database.
+**
+** Parameter        p_bda - (input) BD_ADDR ->  Address of device to clear
+**                                              (NULL clears all entries)
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_clr_inq_db (BD_ADDR p_bda)
+{
+    tBTM_INQUIRY_VAR_ST     *p_inq = &btm_cb.btm_inq_vars;
+    tINQ_DB_ENT             *p_ent = p_inq->inq_db;
+    UINT16                   xx;
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG2 ("btm_clr_inq_db: inq_active:0x%x state:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state);
+#endif
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if (p_ent->in_use)
+        {
+            /* If this is the specified BD_ADDR or clearing all devices */
+            if (p_bda == NULL ||
+                (!memcmp (p_ent->inq_info.results.remote_bd_addr, p_bda, BD_ADDR_LEN)))
+            {
+                p_ent->in_use = FALSE;
+#if (BTM_INQ_GET_REMOTE_NAME == TRUE)
+                p_ent->inq_info.remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+#endif
+
+                if (btm_cb.btm_inq_vars.p_inq_change_cb)
+                    (*btm_cb.btm_inq_vars.p_inq_change_cb) (&p_ent->inq_info, FALSE);
+            }
+        }
+    }
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG2 ("inq_active:0x%x state:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_clr_inq_result_flt
+**
+** Description      This function looks through the bdaddr database for a match
+**                  based on Bluetooth Device Address
+**
+** Returns          TRUE if found, else FALSE (new entry)
+**
+*******************************************************************************/
+static void btm_clr_inq_result_flt (void)
+{
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+    if (p_inq->p_bd_db)
+    {
+        GKI_freebuf(p_inq->p_bd_db);
+        p_inq->p_bd_db = NULL;
+    }
+    p_inq->num_bd_entries = 0;
+    p_inq->max_bd_entries = 0;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_inq_find_bdaddr
+**
+** Description      This function looks through the bdaddr database for a match
+**                  based on Bluetooth Device Address
+**
+** Returns          TRUE if found, else FALSE (new entry)
+**
+*******************************************************************************/
+BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda)
+{
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+    tINQ_BDADDR         *p_db = &p_inq->p_bd_db[0];
+    UINT16       xx;
+
+    /* Don't bother searching, database doesn't exist or periodic mode */
+    if ((p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE) || !p_db)
+        return (FALSE);
+
+    for (xx = 0; xx < p_inq->num_bd_entries; xx++, p_db++)
+    {
+        if (!memcmp(p_db->bd_addr, p_bda, BD_ADDR_LEN)
+            && p_db->inq_count == p_inq->inq_counter)
+            return (TRUE);
+    }
+
+    if (xx < p_inq->max_bd_entries)
+    {
+        p_db->inq_count = p_inq->inq_counter;
+        memcpy(p_db->bd_addr, p_bda, BD_ADDR_LEN);
+        p_inq->num_bd_entries++;
+    }
+
+#endif
+    /* If here, New Entry */
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_inq_db_find
+**
+** Description      This function looks through the inquiry database for a match
+**                  based on Bluetooth Device Address
+**
+** Returns          pointer to entry, or NULL if not found
+**
+*******************************************************************************/
+tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda)
+{
+    UINT16       xx;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if ((p_ent->in_use) && (!memcmp (p_ent->inq_info.results.remote_bd_addr, p_bda, BD_ADDR_LEN)))
+            return (p_ent);
+    }
+
+    /* If here, not found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_inq_db_new
+**
+** Description      This function looks through the inquiry database for an unused
+**                  entry. If no entry is free, it allocates the oldest entry.
+**
+** Returns          pointer to entry
+**
+*******************************************************************************/
+tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda)
+{
+    UINT16       xx;
+    tINQ_DB_ENT  *p_ent = btm_cb.btm_inq_vars.inq_db;
+    tINQ_DB_ENT  *p_old = btm_cb.btm_inq_vars.inq_db;
+    UINT32       ot = 0xFFFFFFFF;
+
+    for (xx = 0; xx < BTM_INQ_DB_SIZE; xx++, p_ent++)
+    {
+        if (!p_ent->in_use)
+        {
+            memset (p_ent, 0, sizeof (tINQ_DB_ENT));
+            memcpy (p_ent->inq_info.results.remote_bd_addr, p_bda, BD_ADDR_LEN);
+            p_ent->in_use = TRUE;
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+            p_ent->inq_info.remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+#endif
+
+            return (p_ent);
+        }
+
+        if (p_ent->time_of_resp < ot)
+        {
+            p_old = p_ent;
+            ot    = p_ent->time_of_resp;
+        }
+    }
+
+    /* If here, no free entry found. Return the oldest. */
+
+    /* Before deleting the oldest, if anyone is registered for change */
+    /* notifications, then tell him we are deleting an entry.         */
+    if (btm_cb.btm_inq_vars.p_inq_change_cb)
+        (*btm_cb.btm_inq_vars.p_inq_change_cb) (&p_old->inq_info, FALSE);
+
+    memset (p_old, 0, sizeof (tINQ_DB_ENT));
+    memcpy (p_old->inq_info.results.remote_bd_addr, p_bda, BD_ADDR_LEN);
+    p_old->in_use = TRUE;
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+    p_old->inq_info.remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+#endif
+
+    return (p_old);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_set_inq_event_filter
+**
+** Description      This function is called to set the inquiry event filter.
+**                  It is called by either internally, or by the external API function
+**                  (BTM_SetInqEventFilter).  It is used internally as part of the
+**                  inquiry processing.
+**
+** Input Params:
+**                  filter_cond_type - this is the type of inquiry filter to apply:
+**                          BTM_FILTER_COND_DEVICE_CLASS,
+**                          BTM_FILTER_COND_BD_ADDR, or
+**                          BTM_CLR_INQUIRY_FILTER
+**
+**                  p_filt_cond - this is either a BD_ADDR or DEV_CLASS depending on the
+**                          filter_cond_type  (See section 4.7.3 of Core Spec 1.0b).
+**
+** Returns          BTM_CMD_STARTED if successfully initiated
+**                  BTM_NO_RESOURCES if couldn't get a memory pool buffer
+**                  BTM_ILLEGAL_VALUE if a bad parameter was detected
+**
+*******************************************************************************/
+static tBTM_STATUS btm_set_inq_event_filter (UINT8 filter_cond_type,
+                                             tBTM_INQ_FILT_COND *p_filt_cond)
+{
+    UINT8    condition_length = DEV_CLASS_LEN * 2;
+    UINT8    condition_buf[DEV_CLASS_LEN * 2];
+    UINT8   *p_cond = condition_buf;                    /* points to the condition to pass to HCI */
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG1 ("btm_set_inq_event_filter: filter type %d [Clear-0, COD-1, BDADDR-2]",
+        filter_cond_type);
+    BTM_TRACE_DEBUG6 ("                       condition [%02x%02x%02x %02x%02x%02x]",
+               p_filt_cond->bdaddr_cond[0], p_filt_cond->bdaddr_cond[1], p_filt_cond->bdaddr_cond[2],
+               p_filt_cond->bdaddr_cond[3], p_filt_cond->bdaddr_cond[4], p_filt_cond->bdaddr_cond[5]);
+#endif
+
+    /* Load the correct filter condition to pass to the lower layer */
+    switch (filter_cond_type)
+    {
+    case BTM_FILTER_COND_DEVICE_CLASS:
+        /* copy the device class and device class fields into contiguous memory to send to HCI */
+        memcpy (condition_buf, p_filt_cond->cod_cond.dev_class, DEV_CLASS_LEN);
+        memcpy (&condition_buf[DEV_CLASS_LEN],
+                p_filt_cond->cod_cond.dev_class_mask, DEV_CLASS_LEN);
+
+        /* condition length should already be set as the default */
+        break;
+
+    case BTM_FILTER_COND_BD_ADDR:
+        p_cond = p_filt_cond->bdaddr_cond;
+
+        /* condition length should already be set as the default */
+        break;
+
+    case BTM_CLR_INQUIRY_FILTER:
+        condition_length = 0;
+        break;
+
+    default:
+        return (BTM_ILLEGAL_VALUE);     /* Bad parameter was passed in */
+    }
+
+    btm_cb.btm_inq_vars.inqfilt_active = TRUE;
+
+    /* Filter the inquiry results for the specified condition type and value */
+    if (btsnd_hcic_set_event_filter(HCI_FILTER_INQUIRY_RESULT, filter_cond_type,
+                                    p_cond, condition_length))
+
+        return (BTM_CMD_STARTED);
+    else
+        return (BTM_NO_RESOURCES);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_event_filter_complete
+**
+** Description      This function is called when a set event filter has completed.
+**                  Note: This routine currently only handles inquiry filters.
+**                      Connection filters are ignored for now.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_event_filter_complete (UINT8 *p)
+{
+    UINT8            hci_status;
+    tBTM_STATUS      status;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+    tBTM_CMPL_CB   *p_cb = p_inq->p_inqfilter_cmpl_cb;
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG3 ("btm_event_filter_complete: inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+    /* If the filter complete event is from an old or cancelled request, ignore it */
+    if(p_inq->pending_filt_complete_event)
+    {
+        p_inq->pending_filt_complete_event--;
+        return;
+    }
+
+    /* Only process the inquiry filter; Ignore the connection filter until it
+       is used by the upper layers */
+    if (p_inq->inqfilt_active == TRUE )
+    {
+        /* Extract the returned status from the buffer */
+        STREAM_TO_UINT8 (hci_status, p);
+        if (hci_status != HCI_SUCCESS)
+        {
+            /* If standalone operation, return the error status; if embedded in the inquiry, continue the inquiry */
+            BTM_TRACE_WARNING1 ("BTM Warning: Set Event Filter Failed (HCI returned 0x%x)", hci_status);
+            status = BTM_ERR_PROCESSING;
+        }
+        else
+            status = BTM_SUCCESS;
+
+        /* If the set filter was initiated externally (via BTM_SetInqEventFilter), call the
+           callback function to notify the initiator that it has completed */
+        if (p_inq->state == BTM_INQ_INACTIVE_STATE)
+        {
+            p_inq->inqfilt_active = FALSE;
+            if (p_cb)
+                (*p_cb) (&status);
+        }
+        else    /* An inquiry is active (the set filter command was internally generated),
+                   process the next state of the process (Set a new filter or start the inquiry). */
+        {
+            if(status != BTM_SUCCESS)
+            {
+                /* Process the inquiry complete (Error Status) */
+                btm_process_inq_complete (BTM_ERR_PROCESSING, (UINT8)(p_inq->inqparms.mode & BTM_BR_INQUIRY_MASK));
+
+                /* btm_process_inq_complete() does not restore the following settings on periodic inquiry */
+                p_inq->inqfilt_active = FALSE;
+                p_inq->inq_active = BTM_INQUIRY_INACTIVE;
+                p_inq->state = BTM_INQ_INACTIVE_STATE;
+
+                return;
+            }
+
+            /* Check to see if a new filter needs to be set up */
+            if (p_inq->state == BTM_INQ_CLR_FILT_STATE)
+            {
+                if ((status = btm_set_inq_event_filter (p_inq->inqparms.filter_cond_type, &p_inq->inqparms.filter_cond)) == BTM_CMD_STARTED)
+                {
+                    p_inq->state = BTM_INQ_SET_FILT_STATE;
+                }
+                else    /* Error setting the filter: Call the initiator's callback function to indicate a failure */
+                {
+                    p_inq->inqfilt_active = FALSE;
+
+                    /* Process the inquiry complete (Error Status) */
+                    btm_process_inq_complete (BTM_ERR_PROCESSING, (UINT8)(p_inq->inqparms.mode & BTM_BR_INQUIRY_MASK));
+                }
+            }
+            else    /* Initiate the Inquiry or Periodic Inquiry */
+            {
+                p_inq->state = BTM_INQ_ACTIVE_STATE;
+                p_inq->inqfilt_active = FALSE;
+                btm_initiate_inquiry (p_inq);
+            }
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_initiate_inquiry
+**
+** Description      This function is called to start an inquiry or periodic inquiry
+**                  upon completion of the setting and/or clearing of the inquiry filter.
+**
+** Inputs:          p_inq (btm_cb.btm_inq_vars) - pointer to saved inquiry information
+**                      mode - GENERAL or LIMITED inquiry
+**                      duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED)
+**                      max_resps - maximum amount of devices to search for before ending the inquiry
+**                      filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or
+**                                         BTM_FILTER_COND_BD_ADDR
+**                      filter_cond - value for the filter (based on filter_cond_type)
+**
+** Returns          If an error occurs the initiator's callback is called with the error status.
+**
+*******************************************************************************/
+static void btm_initiate_inquiry (tBTM_INQUIRY_VAR_ST *p_inq)
+{
+    const LAP       *lap;
+    tBTM_INQ_PARMS  *p_inqparms = &p_inq->inqparms;
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG3 ("btm_initiate_inquiry: inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_acl_update_busy_level (BTM_BLI_INQ_EVT);
+#endif
+
+    if (p_inq->inq_active & BTM_SSP_INQUIRY_ACTIVE)
+    {
+        btm_process_inq_complete (BTM_NO_RESOURCES, (UINT8)(p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+        return;
+    }
+
+    /* Make sure the number of responses doesn't overflow the database configuration */
+    p_inqparms->max_resps = (UINT8)((p_inqparms->max_resps <= BTM_INQ_DB_SIZE) ? p_inqparms->max_resps : BTM_INQ_DB_SIZE);
+
+    lap = (p_inq->inq_active & BTM_LIMITED_INQUIRY_ACTIVE) ? &limited_inq_lap : &general_inq_lap;
+
+    if (p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE)
+    {
+        if (!btsnd_hcic_per_inq_mode (p_inq->per_max_delay,
+                                      p_inq->per_min_delay,
+                                      *lap, p_inqparms->duration,
+                                      p_inqparms->max_resps))
+            btm_process_inq_complete (BTM_NO_RESOURCES, (UINT8)(p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+    }
+    else
+    {
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+        btm_clr_inq_result_flt();
+
+        /* Allocate memory to hold bd_addrs responding */
+        if ((p_inq->p_bd_db = (tINQ_BDADDR *)GKI_getbuf(GKI_MAX_BUF_SIZE)) != NULL)
+        {
+            p_inq->max_bd_entries = (UINT16)(GKI_MAX_BUF_SIZE / sizeof(tINQ_BDADDR));
+            memset(p_inq->p_bd_db, 0, GKI_MAX_BUF_SIZE);
+/*            BTM_TRACE_DEBUG1("btm_initiate_inquiry: memory allocated for %d bdaddrs",
+                              p_inq->max_bd_entries); */
+        }
+
+        if (!btsnd_hcic_inquiry(*lap, p_inqparms->duration, 0))
+#else
+        if (!btsnd_hcic_inquiry(*lap, p_inqparms->duration, p_inqparms->max_resps))
+#endif /* BTM_USE_INQ_RESULTS_FILTER */
+            btm_process_inq_complete (BTM_NO_RESOURCES, (UINT8)(p_inqparms->mode & BTM_BR_INQUIRY_MASK));
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_process_inq_results
+**
+** Description      This function is called when inquiry results are received from
+**                  the device. It updates the inquiry database. If the inquiry
+**                  database is full, the oldest entry is discarded.
+**
+** Parameters       inq_res_mode - BTM_INQ_RESULT_STANDARD
+**                                 BTM_INQ_RESULT_WITH_RSSI
+**                                 BTM_INQ_RESULT_EXTENDED
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode)
+{
+    UINT8            num_resp, xx;
+    BD_ADDR          bda;
+    tINQ_DB_ENT     *p_i;
+    tBTM_INQ_RESULTS *p_cur;
+    BOOLEAN          is_new = TRUE;
+    BOOLEAN          update = FALSE;
+    INT8             i_rssi;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+    tBTM_INQ_RESULTS_CB *p_inq_results_cb = p_inq->p_inq_results_cb;
+    UINT8            page_scan_rep_mode = 0;
+    UINT8            page_scan_per_mode = 0;
+    UINT8            page_scan_mode = 0;
+    UINT8            rssi = 0;
+    DEV_CLASS        dc;
+    UINT16           clock_offset;
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+    UINT8            *p_eir_data = NULL;
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+    UINT8            remote_name_len;
+#endif
+#endif
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG3 ("btm_process_inq_results inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+    /* Only process the results if the inquiry is still active */
+    if (!p_inq->inq_active)
+        return;
+
+    STREAM_TO_UINT8 (num_resp, p);
+
+    for (xx = 0; xx < num_resp; xx++)
+    {
+        update = FALSE;
+        /* Extract inquiry results */
+        STREAM_TO_BDADDR   (bda, p);
+        STREAM_TO_UINT8    (page_scan_rep_mode, p);
+        STREAM_TO_UINT8    (page_scan_per_mode, p);
+
+        if (inq_res_mode == BTM_INQ_RESULT_STANDARD)
+        {
+            STREAM_TO_UINT8(page_scan_mode, p);
+        }
+
+        STREAM_TO_DEVCLASS (dc, p);
+        STREAM_TO_UINT16   (clock_offset, p);
+        if (inq_res_mode != BTM_INQ_RESULT_STANDARD)
+        {
+            STREAM_TO_UINT8(rssi, p);
+        }
+
+        p_i = btm_inq_db_find (bda);
+
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+        /* Only process the num_resp is smaller than max_resps.
+           If results are queued to BTU task while canceling inquiry,
+           or when more than one result is in this response, > max_resp
+           responses could be processed which can confuse some apps
+        */
+        if (p_inq->inqparms.max_resps &&
+            p_inq->inq_cmpl_info.num_resp >= p_inq->inqparms.max_resps
+#if BLE_INCLUDED == TRUE
+            /* new device response */
+            && ( p_i == NULL ||
+                /* exisiting device with BR/EDR info */
+                (p_i && (p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BREDR) != 0)
+               )
+#endif
+
+            )
+        {
+/*            BTM_TRACE_WARNING0("INQ RES: Extra Response Received...ignoring"); */
+            return;
+        }
+#endif
+
+        /* Check if this address has already been processed for this inquiry */
+        if (btm_inq_find_bdaddr(bda))
+        {
+/*             BTM_TRACE_DEBUG6("BDA seen before [%02x%02x %02x%02x %02x%02x]",
+                             bda[0], bda[1], bda[2], bda[3], bda[4], bda[5]);*/
+             /* By default suppose no update needed */
+            i_rssi = (INT8)rssi;
+
+            /* If this new RSSI is higher than the last one */
+            if(p_inq->inqparms.report_dup && (rssi != 0) &&
+               p_i && (i_rssi > p_i->inq_info.results.rssi || p_i->inq_info.results.rssi == 0
+#if BLE_INCLUDED == TRUE
+               /* BR/EDR inquiry information update */
+                       || (p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BREDR) != 0
+#endif
+                       ))
+            {
+                p_cur = &p_i->inq_info.results;
+                BTM_TRACE_DEBUG2("update RSSI new:%d, old:%d", i_rssi, p_cur->rssi);
+                p_cur->rssi = i_rssi;
+                update = TRUE;
+            }
+            /* If we received a second Extended Inq Event for an already */
+            /* discovered device, this is because for the first one EIR was not received */
+            else if ((inq_res_mode == BTM_INQ_RESULT_EXTENDED) && (p_i))
+            {
+                p_cur = &p_i->inq_info.results;
+                update = TRUE;
+            }
+            /* If no update needed continue with next response (if any) */
+            else
+                continue;
+        }
+
+        /* Host can be registered to verify comming BDA or DC */
+        if (btm_cb.p_inq_filter_cb)
+        {
+            if (!(* btm_cb.p_inq_filter_cb) (bda, dc))
+            {
+                continue;
+            }
+        }
+
+        /* If existing entry, use that, else get a new one (possibly reusing the oldest) */
+        if (p_i == NULL)
+        {
+            p_i = btm_inq_db_new (bda);
+            is_new = TRUE;
+        }
+
+        /* If an entry for the device already exists, overwrite it ONLY if it is from
+           a previous inquiry. (Ignore it if it is a duplicate response from the same
+           inquiry.
+        */
+        else if (p_i->inq_count == p_inq->inq_counter
+#if (BLE_INCLUDED == TRUE )
+            && (p_i->inq_info.results.device_type & BT_DEVICE_TYPE_BREDR)
+#endif
+            )
+            is_new = FALSE;
+
+        /* keep updating RSSI to have latest value */
+        if( inq_res_mode != BTM_INQ_RESULT_STANDARD )
+            p_i->inq_info.results.rssi = (INT8)rssi;
+        else
+            p_i->inq_info.results.rssi = BTM_INQ_RES_IGNORE_RSSI;
+
+        if (is_new == TRUE)
+        {
+            /* Save the info */
+            p_cur = &p_i->inq_info.results;
+            p_cur->page_scan_rep_mode = page_scan_rep_mode;
+            p_cur->page_scan_per_mode = page_scan_per_mode;
+            p_cur->page_scan_mode     = page_scan_mode;
+            p_cur->dev_class[0]       = dc[0];
+            p_cur->dev_class[1]       = dc[1];
+            p_cur->dev_class[2]       = dc[2];
+            p_cur->clock_offset       = clock_offset  | BTM_CLOCK_OFFSET_VALID;
+
+            p_i->time_of_resp = GKI_get_tick_count ();
+
+            if (p_i->inq_count != p_inq->inq_counter)
+                p_inq->inq_cmpl_info.num_resp++;       /* A new response was found */
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+            p_cur->inq_result_type    = BTM_INQ_RESULT_BR;
+            if (p_i->inq_count != p_inq->inq_counter)
+            {
+                p_cur->device_type  = BT_DEVICE_TYPE_BREDR;
+                p_i->scan_rsp       = FALSE;
+            }
+            else
+                p_cur->device_type    |= BT_DEVICE_TYPE_BREDR;
+#endif
+                p_i->inq_count = p_inq->inq_counter;   /* Mark entry for current inquiry */
+
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+            /* If the number of responses found and not unlimited, issue a cancel inquiry */
+            if (!(p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE) &&
+                p_inq->inqparms.max_resps &&
+                p_inq->inq_cmpl_info.num_resp == p_inq->inqparms.max_resps
+#if BLE_INCLUDED == TRUE
+                /* BLE scanning is active and received adv */
+                && ((((p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK) != 0) &&
+                     p_cur->device_type == BT_DEVICE_TYPE_DUMO && p_i->scan_rsp) ||
+                    (p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK) == 0)
+#endif
+                )
+            {
+/*                BTM_TRACE_DEBUG0("BTMINQ: Found devices, cancelling inquiry..."); */
+                btsnd_hcic_inq_cancel();
+
+#if BLE_INCLUDED == TRUE
+                if ((p_inq->inqparms.mode & BTM_BLE_INQUIRY_MASK) != 0)
+                    btm_ble_stop_scan();
+#endif
+
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+                btm_acl_update_busy_level (BTM_BLI_INQ_DONE_EVT);
+#endif
+            }
+#endif
+            /* Initialize flag to FALSE. This flag is set/used by application */
+            p_i->inq_info.appl_knows_rem_name = FALSE;
+        }
+
+        if (is_new || update)
+        {
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+            if( inq_res_mode == BTM_INQ_RESULT_EXTENDED )
+            {
+                if((p_eir_data = BTM_CheckEirData( p, BTM_EIR_COMPLETE_LOCAL_NAME_TYPE,
+                                                   &remote_name_len )) == NULL)
+                {
+                    p_eir_data = BTM_CheckEirData( p, BTM_EIR_SHORTENED_LOCAL_NAME_TYPE,
+                                                   &remote_name_len );
+                }
+
+                if( p_eir_data )
+                {
+                    if( remote_name_len > BTM_MAX_REM_BD_NAME_LEN )
+                        remote_name_len = BTM_MAX_REM_BD_NAME_LEN;
+
+                    p_i->inq_info.remote_name_len = remote_name_len;
+                    memcpy( p_i->inq_info.remote_name, p_eir_data, p_i->inq_info.remote_name_len );
+                    p_i->inq_info.remote_name[p_i->inq_info.remote_name_len] = 0;
+                    p_i->inq_info.remote_name_state = BTM_INQ_RMT_NAME_DONE;
+                }
+                else
+                    p_i->inq_info.remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+            }
+            else
+#endif
+            {
+            /* Clear out the device name so that it can be re-read */
+            p_i->inq_info.remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+            }
+#endif /*(BTM_INQ_GET_REMOTE_NAME==TRUE)*/
+
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+            if( inq_res_mode == BTM_INQ_RESULT_EXTENDED )
+            {
+                memset( p_cur->eir_uuid, 0,
+                        BTM_EIR_SERVICE_ARRAY_SIZE * (BTM_EIR_ARRAY_BITS/8));
+                /* set bit map of UUID list from received EIR */
+                btm_set_eir_uuid( p, p_cur );
+                p_eir_data = p;
+            }
+            else
+                p_eir_data = NULL;
+#endif
+
+            /* If a callback is registered, call it with the results */
+            if (p_inq_results_cb)
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+                (p_inq_results_cb)((tBTM_INQ_RESULTS *) p_cur, p_eir_data);
+#else
+                (p_inq_results_cb)((tBTM_INQ_RESULTS *) p_cur, NULL);
+#endif
+
+            /* If anyone is registered for change notifications, then tell him we added an entry.  */
+            if (p_inq->p_inq_change_cb)
+                (*p_inq->p_inq_change_cb) (&p_i->inq_info, TRUE);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sort_inq_result
+**
+** Description      This function is called when inquiry complete is received
+**                  from the device to sort inquiry results based on rssi.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sort_inq_result(void)
+{
+    UINT8               xx, yy, num_resp;
+    tINQ_DB_ENT         *p_tmp  = NULL;
+    tINQ_DB_ENT         *p_ent  = btm_cb.btm_inq_vars.inq_db;
+    tINQ_DB_ENT         *p_next = btm_cb.btm_inq_vars.inq_db+1;
+    int                 size;
+
+    num_resp = (btm_cb.btm_inq_vars.inq_cmpl_info.num_resp<BTM_INQ_DB_SIZE)?
+                btm_cb.btm_inq_vars.inq_cmpl_info.num_resp: BTM_INQ_DB_SIZE;
+
+    if((p_tmp = (tINQ_DB_ENT *)GKI_getbuf(sizeof(tINQ_DB_ENT))) != NULL)
+    {
+        size = sizeof(tINQ_DB_ENT);
+        for(xx = 0; xx < num_resp-1; xx++, p_ent++)
+        {
+            for(yy = xx+1, p_next = p_ent+1; yy < num_resp; yy++, p_next++)
+            {
+                if(p_ent->inq_info.results.rssi < p_next->inq_info.results.rssi)
+                {
+                    memcpy (p_tmp,  p_next, size);
+                    memcpy (p_next, p_ent,  size);
+                    memcpy (p_ent,  p_tmp,  size);
+                }
+            }
+        }
+
+        GKI_freebuf(p_tmp);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_process_inq_complete
+**
+** Description      This function is called when inquiry complete is received
+**                  from the device.  Call the callback if not in periodic inquiry
+**                  mode AND it is not NULL (The caller wants the event).
+**
+**                  The callback pass back the status and the number of responses
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_inq_complete (UINT8 status, UINT8 mode)
+{
+    tBTM_CMPL_CB        *p_inq_cb = btm_cb.btm_inq_vars.p_inq_cmpl_cb;
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+    tBTM_INQ_INFO  *p_cur;
+    UINT8           tempstate;
+#endif
+
+    p_inq->inqparms.mode &= ~(mode);
+
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG3 ("btm_process_inq_complete inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_acl_update_busy_level (BTM_BLI_INQ_DONE_EVT);
+#endif
+    /* Ignore any stray or late complete messages if the inquiry is not active */
+    if (p_inq->inq_active)
+    {
+        p_inq->inq_cmpl_info.status = (tBTM_STATUS)((status == HCI_SUCCESS) ? BTM_SUCCESS : BTM_ERR_PROCESSING);
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+        if (p_inq->inq_cmpl_info.status == BTM_SUCCESS)
+        {
+            for (p_cur = BTM_InqDbFirst(); p_cur; p_cur = BTM_InqDbNext (p_cur))
+            {
+                if (p_cur->remote_name_state == BTM_INQ_RMT_NAME_EMPTY)
+                {
+                    tempstate = p_cur->remote_name_state;
+                    p_cur->remote_name_state = BTM_INQ_RMT_NAME_PENDING;
+
+                    if (btm_initiate_rem_name (p_cur->results.remote_bd_addr,
+                                               p_cur, BTM_RMT_NAME_INQ,
+                                               BTM_INQ_RMT_NAME_TIMEOUT, NULL) != BTM_CMD_STARTED)
+                        p_cur->remote_name_state = tempstate;
+                    else
+                        return;
+                }
+            }
+        }
+#endif
+
+        /* Notify caller that the inquiry has completed; (periodic inquiries do not send completion events */
+        if (!(p_inq->inq_active & BTM_PERIODIC_INQUIRY_ACTIVE) && p_inq->inqparms.mode == 0)
+        {
+            p_inq->state = BTM_INQ_INACTIVE_STATE;
+
+            /* Increment so the start of a next inquiry has a new count */
+            p_inq->inq_counter++;
+
+            btm_clr_inq_result_flt();
+
+            if((p_inq->inq_cmpl_info.status == BTM_SUCCESS) && HCI_LMP_INQ_RSSI_SUPPORTED(btm_cb.devcb.local_features))
+            {
+                btm_sort_inq_result();
+            }
+
+            /* Clear the results callback if set */
+            p_inq->p_inq_results_cb = (tBTM_INQ_RESULTS_CB *) NULL;
+            p_inq->inq_active = BTM_INQUIRY_INACTIVE;
+            p_inq->p_inq_cmpl_cb = (tBTM_CMPL_CB *) NULL;
+
+            /* If we have a callback registered for inquiry complete, call it */
+            BTM_TRACE_DEBUG2 ("BTM Inq Compl Callback: status 0x%02x, num results %d",
+                        p_inq->inq_cmpl_info.status, p_inq->inq_cmpl_info.num_resp);
+
+            if (p_inq_cb)
+                (p_inq_cb)((tBTM_INQUIRY_CMPL *) &p_inq->inq_cmpl_info);
+        }
+
+    }
+#if (BTM_INQ_DEBUG == TRUE)
+    BTM_TRACE_DEBUG3 ("inq_active:0x%x state:%d inqfilt_active:%d",
+        btm_cb.btm_inq_vars.inq_active, btm_cb.btm_inq_vars.state, btm_cb.btm_inq_vars.inqfilt_active);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_process_cancel_complete
+**
+** Description      This function is called when inquiry cancel complete is received
+**                  from the device.This function will also call the btm_process_inq_complete
+**                  This function is needed to differentiate a cancel_cmpl_evt from the
+**                  inq_cmpl_evt
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_cancel_complete(UINT8 status, UINT8 mode)
+{
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+     btm_acl_update_busy_level (BTM_BLI_INQ_CANCEL_EVT);
+#endif
+     btm_process_inq_complete(status, mode);
+}
+/*******************************************************************************
+**
+** Function         btm_initiate_rem_name
+**
+** Description      This function looks initiates a remote name request.  It is called
+**                  either by GAP or by the API call BTM_ReadRemoteDeviceName.
+**
+** Input Params:    p_cur         - pointer to an inquiry result structure (NULL if nonexistent)
+**                  p_cb            - callback function called when BTM_CMD_STARTED
+**                                    is returned.
+**                                    A pointer to tBTM_REMOTE_DEV_NAME is passed to the
+**                                    callback.
+**
+** Returns
+**                  BTM_CMD_STARTED is returned if the request was sent to HCI.
+**                  BTM_BUSY if already in progress
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+tBTM_STATUS  btm_initiate_rem_name (BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur,
+                                    UINT8 origin, UINT32 timeout, tBTM_CMPL_CB *p_cb)
+{
+    tBTM_INQUIRY_VAR_ST *p_inq = &btm_cb.btm_inq_vars;
+    BOOLEAN              cmd_ok;
+
+
+    /*** Make sure the device is ready ***/
+    if (!BTM_IsDeviceUp())
+        return (BTM_WRONG_MODE);
+
+
+    if (origin == BTM_RMT_NAME_SEC)
+    {
+        cmd_ok = btsnd_hcic_rmt_name_req (remote_bda, HCI_PAGE_SCAN_REP_MODE_R1,
+                                         HCI_MANDATARY_PAGE_SCAN_MODE, 0);
+        if (cmd_ok)
+            return BTM_CMD_STARTED;
+        else
+            return BTM_NO_RESOURCES;
+    }
+    /* Make sure there are no two remote name requests from external API in progress */
+    else if (origin == BTM_RMT_NAME_EXT)
+    {
+        if (p_inq->remname_active)
+        {
+            return (BTM_BUSY);
+        }
+        else
+        {
+            /* If there is no remote name request running,call the callback function and start timer */
+            p_inq->p_remname_cmpl_cb = p_cb;
+            memcpy(p_inq->remname_bda, remote_bda, BD_ADDR_LEN);
+            btu_start_timer (&p_inq->rmt_name_timer_ent,
+                             BTU_TTYPE_BTM_RMT_NAME,
+                             timeout);
+
+            /* If the database entry exists for the device, use its clock offset */
+            if (p_cur)
+            {
+                cmd_ok = btsnd_hcic_rmt_name_req (remote_bda,
+                                         p_cur->results.page_scan_rep_mode,
+                                         p_cur->results.page_scan_mode,
+                                         (UINT16)(p_cur->results.clock_offset |
+                                                  BTM_CLOCK_OFFSET_VALID));
+            }
+            else /* Otherwise use defaults and mark the clock offset as invalid */
+            {
+                cmd_ok = btsnd_hcic_rmt_name_req (remote_bda, HCI_PAGE_SCAN_REP_MODE_R1,
+                                         HCI_MANDATARY_PAGE_SCAN_MODE, 0);
+            }
+            if (cmd_ok)
+            {
+                p_inq->remname_active = TRUE;
+                return BTM_CMD_STARTED;
+            }
+            else
+                return BTM_NO_RESOURCES;
+        }
+    }
+    /* If the inquire feature is on */
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+
+    else if (origin == BTM_RMT_NAME_INQ)
+    {
+        /* If the database entry exists for the device, use its clock offset */
+        if (p_cur)
+        {
+            cmd_ok = btsnd_hcic_rmt_name_req (remote_bda,
+                                     p_cur->results.page_scan_rep_mode,
+                                     p_cur->results.page_scan_mode,
+                                     (UINT16)(p_cur->results.clock_offset |
+                                              BTM_CLOCK_OFFSET_VALID));
+        }
+        else
+        {
+            cmd_ok = FALSE
+        }
+
+        if (cmd_ok)
+            return BTM_CMD_STARTED;
+        else
+            return BTM_NO_RESOURCES;
+    }
+#endif
+    else
+    {
+
+        return BTM_ILLEGAL_VALUE;
+
+
+    }
+
+
+}
+
+/*******************************************************************************
+**
+** Function         btm_process_remote_name
+**
+** Description      This function is called when a remote name is received from
+**                  the device. If remote names are cached, it updates the inquiry
+**                  database.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_process_remote_name (BD_ADDR bda, BD_NAME bdn, UINT16 evt_len, UINT8 hci_status)
+{
+    tBTM_REMOTE_DEV_NAME    rem_name = {0};
+    tBTM_INQUIRY_VAR_ST    *p_inq = &btm_cb.btm_inq_vars;
+    tBTM_CMPL_CB           *p_cb = p_inq->p_remname_cmpl_cb;
+    UINT8                  *p_n1;
+
+    UINT16                 temp_evt_len;
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+    /*** These are only used if part of the Inquiry Process ***/
+    tBTM_CMPL_CB           *p_inq_cb;
+    tINQ_DB_ENT            *p_i = NULL;
+    UINT8                  *p_n;
+    tBTM_INQ_INFO          *p_cur;
+#endif
+#if BLE_INCLUDED == TRUE
+    tBT_DEVICE_TYPE     dev_type;
+    tBLE_ADDR_TYPE      addr_type;
+#endif
+
+
+    if (bda != NULL)
+    {
+        BTM_TRACE_EVENT6("BDA %02x:%02x:%02x:%02x:%02x:%02x",bda[0], bda[1],
+                 bda[2], bda[3],
+                 bda[4], bda[5]);
+    }
+
+	BTM_TRACE_EVENT6("Inquire BDA %02x:%02x:%02x:%02x:%02x:%02x",p_inq->remname_bda[0], p_inq->remname_bda[1],
+             p_inq->remname_bda[2], p_inq->remname_bda[3],
+             p_inq->remname_bda[4], p_inq->remname_bda[5]);
+
+
+
+    /* If the inquire BDA and remote DBA are the same, then stop the timer and set the active to false */
+    if ((p_inq->remname_active ==TRUE)&&
+        (((bda != NULL) &&
+        (memcmp(bda, p_inq->remname_bda,BD_ADDR_LEN)==0)) || bda == NULL))
+
+	{
+#if BLE_INCLUDED == TRUE
+        BTM_ReadDevInfo(p_inq->remname_bda, &dev_type, &addr_type);
+        if (dev_type == BT_DEVICE_TYPE_BLE)
+        {
+            if (hci_status == HCI_ERR_UNSPECIFIED)
+                btm_ble_cancel_remote_name(p_inq->remname_bda);
+        }
+#endif
+        btu_stop_timer (&p_inq->rmt_name_timer_ent);
+        p_inq->remname_active = FALSE;
+         /* Clean up and return the status if the command was not successful */
+         /* Note: If part of the inquiry, the name is not stored, and the    */
+         /*       inquiry complete callback is called.                       */
+
+        if ((hci_status == HCI_SUCCESS))
+        {
+            /* Copy the name from the data stream into the return structure */
+            /* Note that even if it is not being returned, it is used as a  */
+            /*      temporary buffer.                                       */
+            p_n1 = (UINT8 *)rem_name.remote_bd_name;
+            rem_name.length = (evt_len < BD_NAME_LEN) ? evt_len : BD_NAME_LEN;
+            rem_name.status = BTM_SUCCESS;
+            temp_evt_len = rem_name.length;
+
+            while (temp_evt_len > 0)
+            {
+                *p_n1++ = *bdn++;
+                temp_evt_len--;
+            }
+        }
+
+
+        /* If processing a stand alone remote name then report the error in the callback */
+        else
+        {
+            rem_name.status = BTM_BAD_VALUE_RET;
+            rem_name.length = 0;
+            rem_name.remote_bd_name[0] = 0;
+        }
+        /* Reset the remote BAD to zero and call callback if possible */
+        memset(p_inq->remname_bda, 0, BD_ADDR_LEN);
+
+        p_inq->p_remname_cmpl_cb = NULL;
+        if (p_cb)
+            (p_cb)((tBTM_REMOTE_DEV_NAME *)&rem_name);
+    }
+
+
+#if (BTM_INQ_GET_REMOTE_NAME==TRUE)
+    /* If existing entry, update the name */
+    if ((bda != NULL) && ((p_i = btm_inq_db_find (bda)) != NULL)
+     && (hci_status == HCI_SUCCESS))
+    {
+        p_i->inq_info.remote_name_state = BTM_INQ_RMT_NAME_DONE;
+        p_n = p_i->inq_info.remote_name;
+        memset(p_n, 0, BTM_MAX_REM_BD_NAME_LEN + 1);
+        p_i->inq_info.remote_name_len = (rem_name.length < BTM_MAX_REM_BD_NAME_LEN) ?
+                                         rem_name.length : BTM_MAX_REM_BD_NAME_LEN;
+        evt_len = p_i->inq_info.remote_name_len;
+        p_n1 = (UINT8 *)rem_name.remote_bd_name;
+        while (evt_len > 0)
+        {
+            *p_n++ = *p_n1++;
+            evt_len--;
+        }
+
+        if (btm_cb.btm_inq_vars.p_inq_change_cb)
+            (*btm_cb.btm_inq_vars.p_inq_change_cb) (&p_i->inq_info, TRUE);
+    }
+    else
+    {
+        if (p_i)
+            p_i->inq_info.remote_name_state = BTM_INQ_RMT_NAME_FAILED;
+        else
+        {
+            /* Find the entry which is currently doing name request */
+            for (p_cur = BTM_InqDbFirst(); p_cur; p_cur = BTM_InqDbNext (p_cur))
+            {
+                if (p_cur->remote_name_state == BTM_INQ_RMT_NAME_PENDING)
+                {
+                    /* Should be only one */
+                    p_cur->remote_name_state = BTM_INQ_RMT_NAME_FAILED;
+                    break;
+                }
+            }
+        }
+    }
+
+    /* If an inquiry is in progress then update other entries */
+    if (p_inq->inq_active)
+    {
+        /* Check if there are any more entries inquired but not named */
+        for (p_cur = BTM_InqDbFirst(); p_cur; p_cur = BTM_InqDbNext (p_cur))
+        {
+            if (p_cur->remote_name_state == BTM_INQ_RMT_NAME_EMPTY)
+            {
+                p_cur->remote_name_state = BTM_INQ_RMT_NAME_PENDING;
+#if (BLE_INCLUDED == TRUE)
+                BTM_ReadDevInfo(remote_bda, &dev_type, &addr_type);
+                if (dev_type == BT_DEVICE_TYPE_BLE)
+                {
+                    if (btm_ble_read_remote_name(remote_bda, p_cur, p_cb) != BTM_CMD_STARTED)
+                        p_cur->remote_name_state = BTM_INQ_RMT_NAME_FAILED;
+                    else
+                        return;
+                }
+                else
+#endif
+                {
+                    if (btm_initiate_rem_name (p_cur->results.remote_bd_addr,
+                                               p_cur, BTM_RMT_NAME_INQ,
+                                               BTM_INQ_RMT_NAME_TIMEOUT, NULL) != BTM_CMD_STARTED)
+                        p_cur->remote_name_state = BTM_INQ_RMT_NAME_FAILED;
+                    else
+                        return;
+                }
+            }
+        }
+
+        /* The inquiry has finished so call the callback for the inquiry */
+        p_inq_cb = p_inq->p_inq_cmpl_cb;
+        p_inq->state = BTM_INQ_INACTIVE_STATE;
+        p_inq->inq_active = BTM_INQUIRY_INACTIVE;
+        p_inq->p_inq_cmpl_cb = NULL;
+
+        /* If we have a callback registered for inquiry complete, call it */
+        if (p_inq_cb)
+            (p_inq_cb)((tBTM_INQUIRY_CMPL *) &p_inq->inq_cmpl_info);
+
+        /* In some cases we can not get name of the device once but will be */
+        /* able to do it next time.  Until we have better solution we will  */
+        /* try to get name every time */
+        for (p_cur = BTM_InqDbFirst(); p_cur; p_cur = BTM_InqDbNext (p_cur))
+        {
+            if (p_cur->remote_name_state == BTM_INQ_RMT_NAME_FAILED)
+                p_cur->remote_name_state = BTM_INQ_RMT_NAME_EMPTY;
+        }
+    }
+#endif  /* BTM_INQ_GET_REMOTE_NAME == TRUE */
+}
+
+/*******************************************************************************
+**
+** Function         btm_inq_rmt_name_failed
+**
+** Description      This function is if timeout expires while getting remote
+**                  name.  This is done for devices that incorrectly do not
+**                  report operation failure
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_inq_rmt_name_failed (void)
+{
+    BTM_TRACE_ERROR1 ("btm_inq_rmt_name_failed()  remname_active=%d", btm_cb.btm_inq_vars.remname_active);
+
+    if (btm_cb.btm_inq_vars.remname_active)
+        btm_process_remote_name (btm_cb.btm_inq_vars.remname_bda, NULL, 0, HCI_ERR_UNSPECIFIED);
+    else
+        btm_process_remote_name (NULL, NULL, 0, HCI_ERR_UNSPECIFIED);
+
+    btm_sec_rmt_name_request_complete (NULL, NULL, HCI_ERR_UNSPECIFIED);
+}
+/*******************************************************************************
+**
+** Function         btm_read_linq_tx_power_complete
+**
+** Description      read inquiry tx power level complete callback function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_linq_tx_power_complete(UINT8 *p)
+{
+    tBTM_CMPL_CB                *p_cb = btm_cb.devcb.p_txpwer_cmpl_cb;
+    tBTM_INQ_TXPWR_RESULTS        results;
+
+    btu_stop_timer (&btm_cb.devcb.txpwer_timer);
+    /* If there was a callback registered for read inq tx power, call it */
+    btm_cb.devcb.p_txpwer_cmpl_cb = NULL;
+
+    if (p_cb)
+    {
+        STREAM_TO_UINT8  (results.hci_status, p);
+
+        if (results.hci_status == HCI_SUCCESS)
+        {
+            results.status = BTM_SUCCESS;
+
+            STREAM_TO_UINT8 (results.tx_power, p);
+            BTM_TRACE_EVENT2 ("BTM INQ TX POWER Complete: tx_power %d, hci status 0x%02x",
+                              results.tx_power, results.hci_status);
+        }
+        else
+            results.status = BTM_ERR_PROCESSING;
+
+        (*p_cb)(&results);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         BTM_WriteEIR
+**
+** Description      This function is called to write EIR data to controller.
+**
+** Parameters       p_buff - allocated HCI command buffer including extended
+**                           inquriry response
+**
+** Returns          BTM_SUCCESS  - if successful
+**                  BTM_MODE_UNSUPPORTED - if local device cannot support it
+**
+*******************************************************************************/
+tBTM_STATUS BTM_WriteEIR( BT_HDR *p_buff )
+{
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    if (HCI_EXT_INQ_RSP_SUPPORTED(btm_cb.devcb.local_features))
+    {
+        BTM_TRACE_API0("Write Extended Inquiry Response to controller");
+        btsnd_hcic_write_ext_inquiry_response (p_buff, BTM_EIR_DEFAULT_FEC_REQUIRED);
+        return BTM_SUCCESS;
+    }
+    else
+    {
+        GKI_freebuf(p_buff);
+        return BTM_MODE_UNSUPPORTED;
+    }
+#else
+    GKI_freebuf(p_buff);
+    return BTM_SUCCESS;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_CheckEirData
+**
+** Description      This function is called to get EIR data from significant part.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  type   - finding EIR data type
+**                  p_length - return the length of EIR data not including type
+**
+** Returns          pointer of EIR data
+**
+*******************************************************************************/
+UINT8 *BTM_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length )
+{
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+    UINT8 *p = p_eir;
+    UINT8 length;
+    UINT8 eir_type;
+    BTM_TRACE_API1("BTM_CheckEirData type=0x%02X", type);
+
+    STREAM_TO_UINT8(length, p);
+    while( length && (p - p_eir <= HCI_EXT_INQ_RESPONSE_LEN))
+    {
+        STREAM_TO_UINT8(eir_type, p);
+        if( eir_type == type )
+        {
+            /* length doesn't include itself */
+            *p_length = length - 1; /* minus the length of type */
+            return p;
+        }
+        p += length - 1; /* skip the length of data */
+        STREAM_TO_UINT8(length, p);
+    }
+
+    *p_length = 0;
+    return NULL;
+#else
+    return NULL;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_convert_uuid_to_eir_service
+**
+** Description      This function is called to get the bit position of UUID.
+**
+** Parameters       uuid16 - UUID 16-bit
+**
+** Returns          BTM EIR service ID if found
+**                  BTM_EIR_MAX_SERVICES - if not found
+**
+*******************************************************************************/
+#if (( BTM_EIR_CLIENT_INCLUDED == TRUE )||( BTM_EIR_SERVER_INCLUDED == TRUE ))
+static UINT8 btm_convert_uuid_to_eir_service( UINT16 uuid16 )
+{
+    UINT8 xx;
+
+    for( xx = 0; xx < BTM_EIR_MAX_SERVICES; xx++ )
+    {
+        if( uuid16 == BTM_EIR_UUID_LKUP_TBL[xx])
+        {
+            return xx;
+        }
+    }
+    return BTM_EIR_MAX_SERVICES;
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_HasEirService
+**
+** Description      This function is called to know if UUID in bit map of UUID.
+**
+** Parameters       p_eir_uuid - bit map of UUID list
+**                  uuid16 - UUID 16-bit
+**
+** Returns          TRUE - if found
+**                  FALSE - if not found
+**
+*******************************************************************************/
+BOOLEAN BTM_HasEirService( UINT32 *p_eir_uuid, UINT16 uuid16 )
+{
+#if ((BTM_EIR_SERVER_INCLUDED == TRUE)||(BTM_EIR_CLIENT_INCLUDED == TRUE))
+    UINT8 service_id;
+
+    service_id = btm_convert_uuid_to_eir_service(uuid16);
+    if( service_id < BTM_EIR_MAX_SERVICES )
+        return( BTM_EIR_HAS_SERVICE( p_eir_uuid, service_id ));
+    else
+        return( FALSE );
+#else
+    return( FALSE );
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_HasInquiryEirService
+**
+** Description      This function is called to know if UUID in bit map of UUID list.
+**
+** Parameters       p_results - inquiry results
+**                  uuid16 - UUID 16-bit
+**
+** Returns          BTM_EIR_FOUND - if found
+**                  BTM_EIR_NOT_FOUND - if not found and it is complete list
+**                  BTM_EIR_UNKNOWN - if not found and it is not complete list
+**
+*******************************************************************************/
+tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService( tBTM_INQ_RESULTS *p_results, UINT16 uuid16 )
+{
+#if ((BTM_EIR_SERVER_INCLUDED == TRUE)||(BTM_EIR_CLIENT_INCLUDED == TRUE))
+    if( BTM_HasEirService( p_results->eir_uuid, uuid16 ))
+    {
+        return BTM_EIR_FOUND;
+    }
+    else if( p_results->eir_complete_list )
+    {
+        return BTM_EIR_NOT_FOUND;
+    }
+    else
+        return BTM_EIR_UNKNOWN;
+#else
+    return BTM_EIR_UNKNOWN;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_AddEirService
+**
+** Description      This function is called to add a service in bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  uuid16 - UUID 16-bit
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTM_AddEirService( UINT32 *p_eir_uuid, UINT16 uuid16 )
+{
+#if ((BTM_EIR_SERVER_INCLUDED == TRUE)||(BTM_EIR_CLIENT_INCLUDED == TRUE))
+    UINT8 service_id;
+
+    service_id = btm_convert_uuid_to_eir_service(uuid16);
+    if( service_id < BTM_EIR_MAX_SERVICES )
+        BTM_EIR_SET_SERVICE( p_eir_uuid, service_id );
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RemoveEirService
+**
+** Description      This function is called to remove a service in bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  uuid16 - UUID 16-bit
+**
+** Returns          None
+**
+*******************************************************************************/
+void BTM_RemoveEirService( UINT32 *p_eir_uuid, UINT16 uuid16 )
+{
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    UINT8 service_id;
+
+    service_id = btm_convert_uuid_to_eir_service(uuid16);
+    if( service_id < BTM_EIR_MAX_SERVICES )
+        BTM_EIR_CLR_SERVICE( p_eir_uuid, service_id );
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetEirSupportedServices
+**
+** Description      This function is called to get UUID list from bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  p - reference of current pointer of EIR
+**                  max_num_uuid16 - max number of UUID can be written in EIR
+**                  num_uuid16 - number of UUID have been written in EIR
+**
+** Returns          BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max
+**                  BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
+**
+*******************************************************************************/
+UINT8 BTM_GetEirSupportedServices( UINT32 *p_eir_uuid,    UINT8 **p,
+                                   UINT8  max_num_uuid16, UINT8 *p_num_uuid16)
+{
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+    UINT8 service_index;
+
+    *p_num_uuid16 = 0;
+
+    for(service_index = 0; service_index < BTM_EIR_MAX_SERVICES; service_index++)
+    {
+        if( BTM_EIR_HAS_SERVICE( p_eir_uuid, service_index ))
+        {
+            if( *p_num_uuid16 < max_num_uuid16 )
+            {
+                UINT16_TO_STREAM(*p, BTM_EIR_UUID_LKUP_TBL[service_index]);
+                (*p_num_uuid16)++;
+            }
+            /* if max number of UUIDs are stored and found one more */
+            else
+            {
+                return BTM_EIR_MORE_16BITS_UUID_TYPE;
+            }
+        }
+    }
+    return BTM_EIR_COMPLETE_16BITS_UUID_TYPE;
+#else
+    return BTM_EIR_COMPLETE_16BITS_UUID_TYPE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetEirUuidList
+**
+** Description      This function parses EIR and returns UUID list.
+**
+** Parameters       p_eir - EIR
+**                  uuid_size - LEN_UUID_16, LEN_UUID_32, LEN_UUID_128
+**                  p_num_uuid - return number of UUID in found list
+**                  p_uuid_list - return UUID list
+**                  max_num_uuid - maximum number of UUID to be returned
+**
+** Returns          0 - if not found
+**                  BTM_EIR_COMPLETE_16BITS_UUID_TYPE
+**                  BTM_EIR_MORE_16BITS_UUID_TYPE
+**                  BTM_EIR_COMPLETE_32BITS_UUID_TYPE
+**                  BTM_EIR_MORE_32BITS_UUID_TYPE
+**                  BTM_EIR_COMPLETE_128BITS_UUID_TYPE
+**                  BTM_EIR_MORE_128BITS_UUID_TYPE
+**
+*******************************************************************************/
+UINT8 BTM_GetEirUuidList( UINT8 *p_eir, UINT8 uuid_size, UINT8 *p_num_uuid,
+                            UINT8 *p_uuid_list, UINT8 max_num_uuid)
+{
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+    UINT8   *p_uuid_data;
+    UINT8   type;
+    UINT8   yy, xx;
+    UINT16  *p_uuid16 = (UINT16 *)p_uuid_list;
+    UINT32  *p_uuid32 = (UINT32 *)p_uuid_list;
+    char    buff[LEN_UUID_128 * 2 + 1];
+
+    p_uuid_data = btm_eir_get_uuid_list( p_eir, uuid_size, p_num_uuid, &type );
+    if( p_uuid_data == NULL )
+    {
+        return 0x00;
+    }
+
+    if( *p_num_uuid > max_num_uuid )
+    {
+        BTM_TRACE_WARNING2("BTM_GetEirUuidList number of uuid in EIR = %d, size of uuid list = %d",
+                           *p_num_uuid, max_num_uuid );
+        *p_num_uuid = max_num_uuid;
+    }
+
+    BTM_TRACE_DEBUG2("BTM_GetEirUuidList type = %02X, number of uuid = %d", type, *p_num_uuid );
+
+    if( uuid_size == LEN_UUID_16 )
+    {
+        for( yy = 0; yy < *p_num_uuid; yy++ )
+        {
+            STREAM_TO_UINT16(*(p_uuid16 + yy), p_uuid_data);
+            BTM_TRACE_DEBUG1("                     0x%04X", *(p_uuid16 + yy));
+        }
+    }
+    else if( uuid_size == LEN_UUID_32 )
+    {
+        for( yy = 0; yy < *p_num_uuid; yy++ )
+        {
+            STREAM_TO_UINT32(*(p_uuid32 + yy), p_uuid_data);
+            BTM_TRACE_DEBUG1("                     0x%08X", *(p_uuid32 + yy));
+        }
+    }
+    else if( uuid_size == LEN_UUID_128 )
+    {
+        for( yy = 0; yy < *p_num_uuid; yy++ )
+        {
+            STREAM_TO_ARRAY16(p_uuid_list + yy * LEN_UUID_128, p_uuid_data);
+            for( xx = 0; xx < LEN_UUID_128; xx++ )
+                sprintf(buff + xx*2, "%02X", *(p_uuid_list + yy * LEN_UUID_128 + xx));
+            BTM_TRACE_DEBUG1("                     0x%s", buff);
+        }
+    }
+
+    return type;
+#else
+    *p_num_uuid = 0;
+    return 0x00;
+#endif
+}
+
+
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btm_eir_get_uuid_list
+**
+** Description      This function searches UUID list in EIR.
+**
+** Parameters       p_eir - address of EIR
+**                  uuid_size - size of UUID to find
+**                  p_num_uuid - number of UUIDs found
+**                  p_uuid_list_type - EIR data type
+**
+** Returns          NULL - if UUID list with uuid_size is not found
+**                  beginning of UUID list in EIR - otherwise
+**
+*******************************************************************************/
+static UINT8 *btm_eir_get_uuid_list( UINT8 *p_eir, UINT8 uuid_size,
+                                     UINT8 *p_num_uuid, UINT8 *p_uuid_list_type )
+{
+    UINT8   *p_uuid_data;
+    UINT8   complete_type, more_type;
+    UINT8   uuid_len;
+
+    switch( uuid_size )
+    {
+    case LEN_UUID_16:
+        complete_type = BTM_EIR_COMPLETE_16BITS_UUID_TYPE;
+        more_type     = BTM_EIR_MORE_16BITS_UUID_TYPE;
+        break;
+    case LEN_UUID_32:
+        complete_type = BTM_EIR_COMPLETE_32BITS_UUID_TYPE;
+        more_type     = BTM_EIR_MORE_32BITS_UUID_TYPE;
+        break;
+    case LEN_UUID_128:
+        complete_type = BTM_EIR_COMPLETE_128BITS_UUID_TYPE;
+        more_type     = BTM_EIR_MORE_128BITS_UUID_TYPE;
+        break;
+    default:
+        *p_num_uuid = 0;
+        return NULL;
+        break;
+    }
+
+    p_uuid_data = BTM_CheckEirData( p_eir, complete_type, &uuid_len );
+    if(p_uuid_data == NULL)
+    {
+        p_uuid_data = BTM_CheckEirData( p_eir, more_type, &uuid_len );
+        *p_uuid_list_type = more_type;
+    }
+    else
+    {
+        *p_uuid_list_type = complete_type;
+    }
+
+    *p_num_uuid = uuid_len / uuid_size;
+    return p_uuid_data;
+}
+
+/*******************************************************************************
+**
+** Function         btm_convert_uuid_to_uuid16
+**
+** Description      This function converts UUID to UUID 16-bit.
+**
+** Parameters       p_uuid - address of UUID
+**                  uuid_size - size of UUID
+**
+** Returns          0 - if UUID cannot be converted to UUID 16-bit
+**                  UUID 16-bit - otherwise
+**
+*******************************************************************************/
+static UINT16 btm_convert_uuid_to_uuid16( UINT8 *p_uuid, UINT8 uuid_size )
+{
+    static const UINT8  base_uuid[LEN_UUID_128] = {0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80,
+                                                   0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+    UINT16 uuid16 = 0;
+    UINT32 uuid32;
+    BOOLEAN is_base_uuid;
+    UINT8  xx;
+
+    switch (uuid_size)
+    {
+    case LEN_UUID_16:
+        STREAM_TO_UINT16 (uuid16, p_uuid);
+        break;
+    case LEN_UUID_32:
+        STREAM_TO_UINT32 (uuid32, p_uuid);
+        if (uuid32 < 0x10000)
+            uuid16 = (UINT16) uuid32;
+        break;
+    case LEN_UUID_128:
+        /* See if we can compress his UUID down to 16 or 32bit UUIDs */
+        is_base_uuid = TRUE;
+        for (xx = 0; xx < LEN_UUID_128 - 4; xx++)
+        {
+            if (p_uuid[xx] != base_uuid[xx])
+            {
+                is_base_uuid = FALSE;
+                break;
+            }
+        }
+        if (is_base_uuid)
+        {
+            if ((p_uuid[LEN_UUID_128 - 1] == 0) && (p_uuid[LEN_UUID_128 - 2] == 0))
+            {
+                p_uuid += (LEN_UUID_128 - 4);
+                STREAM_TO_UINT16(uuid16, p_uuid);
+            }
+        }
+        break;
+    default:
+        BTM_TRACE_WARNING0("btm_convert_uuid_to_uuid16 invalid uuid size");
+        break;
+    }
+
+    return( uuid16);
+}
+
+/*******************************************************************************
+**
+** Function         btm_set_eir_uuid
+**
+** Description      This function is called to store received UUID into inquiry result.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  p_results - pointer of inquiry result
+**
+** Returns          None
+**
+*******************************************************************************/
+void btm_set_eir_uuid( UINT8 *p_eir, tBTM_INQ_RESULTS *p_results )
+{
+    UINT8   *p_uuid_data;
+    UINT8   num_uuid;
+    UINT16  uuid16;
+    UINT8   yy;
+    UINT8   type = BTM_EIR_MORE_16BITS_UUID_TYPE;
+
+    p_uuid_data = btm_eir_get_uuid_list( p_eir, LEN_UUID_16, &num_uuid, &type );
+
+    if(type == BTM_EIR_COMPLETE_16BITS_UUID_TYPE)
+    {
+        p_results->eir_complete_list = TRUE;
+    }
+    else
+    {
+        p_results->eir_complete_list = FALSE;
+    }
+
+    BTM_TRACE_API1("btm_set_eir_uuid eir_complete_list=0x%02X", p_results->eir_complete_list);
+
+    if( p_uuid_data )
+    {
+        for( yy = 0; yy < num_uuid; yy++ )
+        {
+            STREAM_TO_UINT16(uuid16, p_uuid_data);
+            BTM_AddEirService( p_results->eir_uuid, uuid16 );
+        }
+    }
+
+    p_uuid_data = btm_eir_get_uuid_list( p_eir, LEN_UUID_32, &num_uuid, &type );
+    if( p_uuid_data )
+    {
+        for( yy = 0; yy < num_uuid; yy++ )
+        {
+            uuid16 = btm_convert_uuid_to_uuid16( p_uuid_data, LEN_UUID_32 );
+            p_uuid_data += LEN_UUID_32;
+            if( uuid16 )
+                BTM_AddEirService( p_results->eir_uuid, uuid16 );
+        }
+    }
+
+    p_uuid_data = btm_eir_get_uuid_list( p_eir, LEN_UUID_128, &num_uuid, &type );
+    if( p_uuid_data )
+    {
+        for( yy = 0; yy < num_uuid; yy++ )
+        {
+            uuid16 = btm_convert_uuid_to_uuid16( p_uuid_data, LEN_UUID_128 );
+            p_uuid_data += LEN_UUID_128;
+            if( uuid16 )
+                BTM_AddEirService( p_results->eir_uuid, uuid16 );
+        }
+    }
+
+    BTM_TRACE_DEBUG2("btm_set_eir_uuid eir_uuid=0x%08X %08X",
+                     p_results->eir_uuid[1], p_results->eir_uuid[0] );
+}
+#endif
+
diff --git a/stack/btm/btm_int.h b/stack/btm/btm_int.h
new file mode 100644
index 0000000..e5f4c15
--- /dev/null
+++ b/stack/btm/btm_int.h
@@ -0,0 +1,1114 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main Bluetooth Manager (BTM) internal
+ *  definitions.
+ *
+ ******************************************************************************/
+#ifndef BTM_INT_H
+#define BTM_INT_H
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcidefs.h"
+
+#if RFCOMM_INCLUDED == TRUE
+#include "rfcdefs.h"
+#endif
+
+#include "btm_api.h"
+
+#if (BLE_INCLUDED == TRUE)
+#include "btm_ble_int.h"
+#if (SMP_INCLUDED == TRUE)
+#include "smp_api.h"
+#endif
+#endif
+
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1];
+#endif
+
+#define  BTM_ACL_IS_CONNECTED(bda)   (btm_bda_to_acl (bda) != NULL)
+
+/* Definitions for Server Channel Number (SCN) management
+*/
+#define BTM_MAX_SCN      PORT_MAX_RFC_PORTS
+
+/* Define masks for supported and exception 2.0 ACL packet types
+*/
+#define BTM_ACL_SUPPORTED_PKTS_MASK      (HCI_PKT_TYPES_MASK_DM1        | \
+                                          HCI_PKT_TYPES_MASK_DH1        | \
+                                          HCI_PKT_TYPES_MASK_DM3        | \
+                                          HCI_PKT_TYPES_MASK_DH3        | \
+                                          HCI_PKT_TYPES_MASK_DM5        | \
+                                          HCI_PKT_TYPES_MASK_DH5)
+
+#define BTM_ACL_EXCEPTION_PKTS_MASK      (HCI_PKT_TYPES_MASK_NO_2_DH1   | \
+                                          HCI_PKT_TYPES_MASK_NO_3_DH1   | \
+                                          HCI_PKT_TYPES_MASK_NO_2_DH3   | \
+                                          HCI_PKT_TYPES_MASK_NO_3_DH3   | \
+                                          HCI_PKT_TYPES_MASK_NO_2_DH5   | \
+                                          HCI_PKT_TYPES_MASK_NO_3_DH5)
+
+#define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->features) && \
+                               HCI_ATOMIC_ENCRYPT_SUPPORTED(btm_cb.devcb.local_features)) \
+                               ? TRUE : FALSE)
+
+#define BTM_IS_BRCM_CONTROLLER() (btm_cb.devcb.local_version.manufacturer == LMP_COMPID_BROADCOM)
+
+
+/* Define the ACL Management control structure
+*/
+typedef struct
+{
+    UINT16          hci_handle;
+    UINT16          pkt_types_mask;
+    UINT16          restore_pkt_types;  /* when coming in/out of SCO connection restore the packet types */
+    UINT16          clock_offset;
+    BD_ADDR         remote_addr;
+    DEV_CLASS       remote_dc;
+    BD_NAME         remote_name;
+
+    UINT16          manufacturer;
+    UINT16          lmp_subversion;
+    UINT16          link_super_tout;
+    BD_FEATURES     features;           /* Features suported by the device    */
+    UINT8           lmp_version;
+
+    BOOLEAN         in_use;
+    UINT8           link_role;
+    BOOLEAN         link_up_issued;     /* True if busy_level link up has been issued */
+
+#define BTM_ACL_SWKEY_STATE_IDLE                0
+#define BTM_ACL_SWKEY_STATE_MODE_CHANGE         1
+#define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF      2
+#define BTM_ACL_SWKEY_STATE_SWITCHING           3
+#define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON       4
+#define BTM_ACL_SWKEY_STATE_IN_PROGRESS         5
+    UINT8           switch_role_state;
+    UINT8           change_key_state;
+
+#define BTM_ACL_ENCRYPT_STATE_IDLE              0
+#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF       1   /* encryption turning off */
+#define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC         2   /* temporarily off for change link key or role switch */
+#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON        3   /* encryption turning on */
+    UINT8           encrypt_state;                  /* overall BTM encryption state */
+
+#if BTM_PWR_MGR_INCLUDED == FALSE
+    UINT8           mode;
+#endif /* BTM_PWR_MGR_INCLUDED */
+#if BLE_INCLUDED == TRUE
+    UINT8           is_le_link;
+#endif
+
+} tACL_CONN;
+
+/*****************************************************
+** TIMER Definitions
+******************************************************/
+#define TT_DEV_RESET     1
+#define TT_DEV_RLN       2
+#define TT_DEV_RLNKP     4              /* Read Link Policy Settings */
+
+/* Define the Device Management control structure
+*/
+typedef struct
+{
+    tBTM_DEV_STATUS_CB  *p_dev_status_cb;   /* Device status change callback        */
+    tBTM_VS_EVT_CB      *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS];     /* Register for vendor specific events  */
+
+    tBTM_CMPL_CB        *p_stored_link_key_cmpl_cb;   /* Read/Write/Delete stored link key    */
+
+    TIMER_LIST_ENT       reset_timer;
+    tBTM_CMPL_CB        *p_reset_cmpl_cb;   /* Callback function to be called       */
+                                            /* when startup of the device is done   */
+    TIMER_LIST_ENT       rln_timer;
+    tBTM_CMPL_CB        *p_rln_cmpl_cb;     /* Callback function to be called when  */
+                                            /* read local name function complete    */
+    TIMER_LIST_ENT       rlinkp_timer;
+    tBTM_CMPL_CB        *p_rlinkp_cmpl_cb;  /* Callback function to be called when  */
+                                            /* read link policy function completes  */
+    TIMER_LIST_ENT       rssi_timer;
+    tBTM_CMPL_CB        *p_rssi_cmpl_cb;    /* Callback function to be called when  */
+                                            /* read rssi function completes         */
+    TIMER_LIST_ENT       lnk_quality_timer;
+    tBTM_CMPL_CB        *p_lnk_qual_cmpl_cb;/* Callback function to be called when  */
+                                            /* read link quality function completes */
+    TIMER_LIST_ENT       txpwer_timer;
+    tBTM_CMPL_CB        *p_txpwer_cmpl_cb;    /* Callback function to be called when  */
+                                            /* read inq tx power function completes  */
+
+    TIMER_LIST_ENT       qossu_timer;
+    tBTM_CMPL_CB        *p_qossu_cmpl_cb;   /* Callback function to be called when  */
+                                            /* qos setup function completes         */
+
+    tBTM_ROLE_SWITCH_CMPL switch_role_ref_data;
+    tBTM_CMPL_CB        *p_switch_role_cb;  /* Callback function to be called when  */
+                                            /* requested switch role is completed   */
+
+    tBTM_CHANGE_KEY_CMPL chg_link_key_ref_data;
+    tBTM_CMPL_CB        *p_chg_link_key_cb; /* Callback function to be called when  */
+                                            /* change of link key is completed      */
+
+    TIMER_LIST_ENT       tx_power_timer;
+    tBTM_CMPL_CB        *p_tx_power_cmpl_cb;   /* Callback function to be called       */
+
+    BD_ADDR              local_addr;        /* BD_ADDR of the local device          */
+    tBTM_VERSION_INFO    local_version;     /* Local Version Information            */
+    BD_FEATURES          local_features;    /* Local features bit mask              */
+    DEV_CLASS            dev_class;         /* Local device class                   */
+#if BLE_INCLUDED == TRUE
+    BD_ADDR                 read_tx_pwr_addr;   /* read TX power target address */
+
+    tBTM_BLE_LOCAL_ID_KEYS  id_keys;            /* local BLE ID keys */
+    BT_OCTET16              er;                 /* BLE encryption key */
+
+#if BTM_BLE_CONFORMANCE_TESTING == TRUE
+    BOOLEAN                 no_disc_if_pair_fail;
+    BOOLEAN			        enable_test_mac_val;
+    BT_OCTET8               test_mac;
+    BOOLEAN			        enable_test_local_sign_cntr;
+    UINT32			        test_local_sign_cntr;
+#endif
+
+
+#endif  /* BLE_INCLUDED */
+
+#define BTM_DEV_STATE_WAIT_RESET_CMPLT  0
+#define BTM_DEV_STATE_WAIT_AFTER_RESET  1
+#define BTM_DEV_STATE_READY             2
+
+    UINT8                state;
+    tBTM_IO_CAP          loc_io_caps;       /* IO capability of the local device */
+    BOOLEAN              loc_auth_req;      /* the auth_req flag  */
+    BD_FEATURES          brcm_features;     /* Broadcom specific features bit mask  */
+} tBTM_DEVCB;
+
+
+/* Define the structures and constants used for inquiry
+*/
+
+/* Definitions of limits for inquiries */
+#define BTM_PER_INQ_MIN_MAX_PERIOD      HCI_PER_INQ_MIN_MAX_PERIOD
+#define BTM_PER_INQ_MAX_MAX_PERIOD      HCI_PER_INQ_MAX_MAX_PERIOD
+#define BTM_PER_INQ_MIN_MIN_PERIOD      HCI_PER_INQ_MIN_MIN_PERIOD
+#define BTM_PER_INQ_MAX_MIN_PERIOD      HCI_PER_INQ_MAX_MIN_PERIOD
+#define BTM_MAX_INQUIRY_LENGTH          HCI_MAX_INQUIRY_LENGTH
+#define BTM_MIN_INQUIRY_LEN             0x01
+
+#define BTM_MIN_INQ_TX_POWER    -70
+#define BTM_MAX_INQ_TX_POWER    20
+
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+typedef struct
+{
+    UINT32          inq_count;          /* Used for determining if a response has already been      */
+                                        /* received for the current inquiry operation. (We do not   */
+                                        /* want to flood the caller with multiple responses from    */
+                                        /* the same device.                                         */
+    BD_ADDR         bd_addr;
+} tINQ_BDADDR;
+#endif
+
+typedef struct
+{
+    UINT32          time_of_resp;
+    UINT32          inq_count;          /* "timestamps" the entry with a particular inquiry count   */
+                                        /* Used for determining if a response has already been      */
+                                        /* received for the current inquiry operation. (We do not   */
+                                        /* want to flood the caller with multiple responses from    */
+                                        /* the same device.                                         */
+    tBTM_INQ_INFO   inq_info;
+    BOOLEAN         in_use;
+
+#if (BLE_INCLUDED == TRUE)
+    BOOLEAN         scan_rsp;
+#endif
+} tINQ_DB_ENT;
+
+
+typedef struct
+{
+    tBTM_CMPL_CB *p_remname_cmpl_cb;
+
+#define BTM_EXT_RMT_NAME_TIMEOUT    40
+
+
+    TIMER_LIST_ENT  rmt_name_timer_ent;
+
+    UINT16           discoverable_mode;
+    UINT16           connectable_mode;
+    UINT16           page_scan_window;
+    UINT16           page_scan_period;
+    UINT16           inq_scan_window;
+    UINT16           inq_scan_period;
+    UINT16           inq_scan_type;
+    UINT16           page_scan_type;        /* current page scan type */
+
+    BD_ADDR          remname_bda;           /* Name of bd addr for active remote name request */
+#define BTM_RMT_NAME_INACTIVE       0
+#define BTM_RMT_NAME_EXT            0x1     /* Initiated through API */
+#define BTM_RMT_NAME_SEC            0x2     /* Initiated internally by security manager */
+#define BTM_RMT_NAME_INQ            0x4     /* Remote name initiated internally by inquiry */
+    BOOLEAN          remname_active;        /* State of a remote name request by external API */
+
+    tBTM_CMPL_CB    *p_inq_cmpl_cb;
+    tBTM_INQ_RESULTS_CB *p_inq_results_cb;
+    tBTM_CMPL_CB    *p_inqfilter_cmpl_cb;   /* Called (if not NULL) after inquiry filter completed */
+    tBTM_INQ_DB_CHANGE_CB *p_inq_change_cb; /* Inquiry database changed callback    */
+    UINT32           inq_counter;           /* Counter incremented each time an inquiry completes */
+                                            /* Used for determining whether or not duplicate devices */
+                                            /* have responded to the same inquiry */
+    TIMER_LIST_ENT   inq_timer_ent;
+#if BTM_USE_INQ_RESULTS_FILTER == TRUE
+    tINQ_BDADDR     *p_bd_db;               /* Pointer to memory that holds bdaddrs */
+    UINT16           num_bd_entries;        /* Number of entries in database */
+    UINT16           max_bd_entries;        /* Maximum number of entries that can be stored */
+#endif
+    tINQ_DB_ENT      inq_db[BTM_INQ_DB_SIZE];
+    tBTM_INQ_PARMS   inqparms;              /* Contains the parameters for the current inquiry */
+    tBTM_INQUIRY_CMPL inq_cmpl_info;        /* Status and number of responses from the last inquiry */
+
+    UINT16           per_min_delay;         /* Current periodic minimum delay */
+    UINT16           per_max_delay;         /* Current periodic maximum delay */
+    BOOLEAN          inqfilt_active;
+    UINT8            pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */
+                                                  /* inquiry that has been cancelled*/
+    UINT8            inqfilt_type;          /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */
+
+#define BTM_INQ_INACTIVE_STATE      0
+#define BTM_INQ_CLR_FILT_STATE      1   /* Currently clearing the inquiry filter preceeding the inquiry request */
+                                        /* (bypassed if filtering is not used)                                  */
+#define BTM_INQ_SET_FILT_STATE      2   /* Sets the new filter (or turns off filtering) in this state */
+#define BTM_INQ_ACTIVE_STATE        3   /* Actual inquiry or periodic inquiry is in progress */
+#define BTM_INQ_REMNAME_STATE       4   /* Remote name requests are active  */
+
+    UINT8            state;             /* Current state that the inquiry process is in */
+    UINT8            inq_active;        /* Bit Mask indicating type of inquiry is active */
+    BOOLEAN          no_inc_ssp;        /* TRUE, to stop inquiry on incoming SSP */
+} tBTM_INQUIRY_VAR_ST;
+
+/* The MSB of the clock offset field indicates that the offset is valid if TRUE */
+#define BTM_CLOCK_OFFSET_VALID      0x8000
+
+/* Define the structures needed by security management
+*/
+
+#define BTM_SEC_INVALID_HANDLE  0xFFFF
+
+typedef UINT8 *BTM_BD_NAME_PTR;                        /* Pointer to Device name */
+
+/* Security callback is called by this unit when security
+**   procedures are completed.  Parameters are
+**              BD Address of remote
+**              Result of the operation
+*/
+typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK;
+
+typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ;
+
+/* MACROs to convert from SCO packet types mask to ESCO and back */
+#define BTM_SCO_PKT_TYPE_MASK   (   HCI_PKT_TYPES_MASK_HV1      \
+                                 |  HCI_PKT_TYPES_MASK_HV2      \
+                                 |  HCI_PKT_TYPES_MASK_HV3)
+
+/* Mask defining only the SCO types of an esco packet type */
+#define BTM_ESCO_PKT_TYPE_MASK  (   HCI_ESCO_PKT_TYPES_MASK_HV1 \
+                                 |  HCI_ESCO_PKT_TYPES_MASK_HV2 \
+                                 |  HCI_ESCO_PKT_TYPES_MASK_HV3)
+
+#define BTM_SCO_2_ESCO(scotype)  ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5))
+#define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5))
+
+/* Define masks for supported and exception 2.0 SCO packet types
+*/
+#define BTM_SCO_SUPPORTED_PKTS_MASK      (HCI_ESCO_PKT_TYPES_MASK_HV1       | \
+                                          HCI_ESCO_PKT_TYPES_MASK_HV2       | \
+                                          HCI_ESCO_PKT_TYPES_MASK_HV3       | \
+                                          HCI_ESCO_PKT_TYPES_MASK_EV3       | \
+                                          HCI_ESCO_PKT_TYPES_MASK_EV4       | \
+                                          HCI_ESCO_PKT_TYPES_MASK_EV5)
+
+#define BTM_SCO_EXCEPTION_PKTS_MASK      (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3  | \
+                                          HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3  | \
+                                          HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5  | \
+                                          HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5)
+
+
+#define BTM_SCO_ROUTE_UNKNOWN       0xff
+
+/* Define the structure that contains (e)SCO data */
+typedef struct
+{
+    tBTM_ESCO_CBACK    *p_esco_cback;   /* Callback for eSCO events     */
+    tBTM_ESCO_PARAMS    setup;
+    tBTM_ESCO_DATA      data;           /* Connection complete information */
+    UINT8               hci_status;
+} tBTM_ESCO_INFO;
+
+/* Define the structure used for SCO Management
+*/
+typedef struct
+{
+    tBTM_ESCO_INFO   esco;              /* Current settings             */
+#if BTM_SCO_HCI_INCLUDED == TRUE
+    BUFFER_Q         xmit_data_q;       /* SCO data transmitting queue  */
+#endif
+    tBTM_SCO_CB     *p_conn_cb;         /* Callback for when connected  */
+    tBTM_SCO_CB     *p_disc_cb;         /* Callback for when disconnect */
+    UINT16           state;             /* The state of the SCO link    */
+    UINT16           hci_handle;        /* HCI Handle                   */
+    BOOLEAN          is_orig;           /* TRUE if the originator       */
+    BOOLEAN          rem_bd_known;      /* TRUE if remote BD addr known */
+
+} tSCO_CONN;
+
+/* SCO Management control block */
+typedef struct
+{
+    tBTM_SCO_IND_CBACK  *app_sco_ind_cb;
+#if BTM_SCO_HCI_INCLUDED == TRUE
+    tBTM_SCO_DATA_CB     *p_data_cb;        /* Callback for SCO data over HCI */
+    UINT32               xmit_window_size; /* Total SCO window in bytes  */
+#endif
+    tSCO_CONN            sco_db[BTM_MAX_SCO_LINKS];
+    tBTM_ESCO_PARAMS     def_esco_parms;
+    BD_ADDR              xfer_addr;
+    UINT16               sco_disc_reason;
+    BOOLEAN              esco_supported;    /* TRUE if 1.2 cntlr AND supports eSCO links */
+    tBTM_SCO_TYPE        desired_sco_mode;
+    tBTM_SCO_TYPE        xfer_sco_type;
+    tBTM_SCO_PCM_PARAM   sco_pcm_param;
+    tBTM_SCO_CODEC_TYPE  codec_in_use;      /* None, CVSD, MSBC, etc. */
+#if BTM_SCO_HCI_INCLUDED == TRUE
+	tBTM_SCO_ROUTE_TYPE	 sco_path;
+#endif
+
+} tSCO_CB;
+
+
+#if BTM_SCO_INCLUDED == TRUE
+extern void     btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb );
+extern void     btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup,
+                                    tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb);
+extern void     btm_reject_sco_link(UINT16 sco_inx );
+extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle);
+#else
+#define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb)
+#define btm_reject_sco_link(sco_inx)
+#define btm_set_sco_ind_cback(sco_ind_cb)
+#define btm_sco_chk_pend_rolechange(hci_handle)
+#endif  /* BTM_SCO_INCLUDED */
+
+/*
+** Define structure for Security Service Record.
+** A record exists for each service registered with the Security Manager
+*/
+typedef struct
+{
+    UINT32          mx_proto_id;        /* Service runs over this multiplexer protocol */
+    UINT32          orig_mx_chan_id;    /* Channel on the multiplexer protocol    */
+    UINT32          term_mx_chan_id;    /* Channel on the multiplexer protocol    */
+    UINT16          psm;                /* L2CAP PSM value */
+    UINT16          security_flags;     /* Bitmap of required security features */
+    UINT8           service_id;         /* Passed in authorization callback */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    UINT16          ucd_security_flags; /* Bitmap of required security features for UCD */
+#endif
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+    UINT8           orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1];
+    UINT8           term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1];
+#endif
+} tBTM_SEC_SERV_REC;
+
+#if BLE_INCLUDED == TRUE
+/* LE Security information of device in Slave Role */
+typedef struct
+{
+    BT_OCTET16          irk;            /* peer diverified identity root */
+    BT_OCTET16          ltk;            /* peer long term key */
+    BT_OCTET16          csrk;           /* peer SRK peer device used to secured sign local data  */
+
+    BT_OCTET8           rand;           /* random vector for LTK generation */
+    UINT16              ediv;           /* LTK diversifier of this slave device */
+    UINT16              div;            /* local DIV  to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1)  */
+    UINT8               sec_level;      /* local pairing security level */
+    UINT8               key_size;       /* key size of the LTK delivered to peer device */
+    UINT8               srk_sec_level;  /* security property of peer SRK for this device */
+    UINT8               local_csrk_sec_level;  /* security property of local CSRK for this device */
+
+    UINT32              counter;        /* peer sign counter for verifying rcv signed cmd */
+    UINT32              local_counter;  /* local sign counter for sending signed write cmd*/
+}tBTM_SEC_BLE_KEYS;
+
+#endif  /* BLE_INCLUDED */
+
+typedef struct
+{
+    tBLE_ADDR_TYPE      ble_addr_type;  /* LE device type: public or random address */
+    BD_ADDR             reconn_addr;    /* reconnect address */
+    BD_ADDR             cur_rand_addr;  /* current random address */
+    BD_ADDR             static_addr;    /* static address */
+
+#if SMP_INCLUDED == TRUE
+    tBTM_LE_KEY_TYPE    key_type;       /* bit mask of valid key types in record */
+    tBTM_SEC_BLE_KEYS   keys;           /* LE device security info in slave rode */
+#endif
+} tBTM_SEC_BLE;
+
+/*
+** Define structure for Security Device Record.
+** A record exists for each device authenticated with this device
+*/
+typedef struct
+{
+    tBTM_SEC_SERV_REC   *p_cur_service;
+    tBTM_SEC_CALLBACK   *p_callback;
+    void                *p_ref_data;
+    UINT32               timestamp;         /* Timestamp of the last connection   */
+    UINT32               trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE];  /* Bitwise OR of trusted services     */
+    UINT16               hci_handle;        /* Handle to connection when exists   */
+    UINT16               clock_offset;      /* Latest known clock offset          */
+    BD_ADDR              bd_addr;           /* BD_ADDR of the device              */
+    DEV_CLASS            dev_class;         /* DEV_CLASS of the device            */
+    LINK_KEY             link_key;          /* Device link key                    */
+
+#define BTM_SEC_AUTHORIZED      BTM_SEC_FLAG_AUTHORIZED
+#define BTM_SEC_AUTHENTICATED   BTM_SEC_FLAG_AUTHENTICATED
+#define BTM_SEC_ENCRYPTED       BTM_SEC_FLAG_ENCRYPTED
+#define BTM_SEC_NAME_KNOWN      0x08
+#define BTM_SEC_LINK_KEY_KNOWN  BTM_SEC_FLAG_LKEY_KNOWN
+#define BTM_SEC_LINK_KEY_AUTHED 0x20
+#define BTM_SEC_ROLE_SWITCHED   0x40
+#define BTM_SEC_IN_USE          0x80
+
+    tBTM_BD_NAME    sec_bd_name;        /* User friendly name of the device. (may be truncated to save space in dev_rec table) */
+    UINT8           sec_flags;          /* Current device security state      */
+    BD_FEATURES     features;           /* Features suported by the device    */
+
+#define BTM_SEC_STATE_IDLE              0
+#define BTM_SEC_STATE_AUTHENTICATING    1
+#define BTM_SEC_STATE_ENCRYPTING        2
+#define BTM_SEC_STATE_GETTING_NAME      3
+#define BTM_SEC_STATE_AUTHORIZING       4
+#define BTM_SEC_STATE_SWITCHING_ROLE    5
+#define BTM_SEC_STATE_DISCONNECTING     6
+#define BTM_SEC_STATE_DELAY_FOR_ENC     7   /* delay to check for encryption to work around controller problems */
+
+    UINT8       sec_state;              /* Operating state                    */
+    BOOLEAN     is_originator;          /* TRUE if device is originating connection */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    BOOLEAN     is_ucd;                 /* TRUE if device is sending or receiving UCD */
+                                        /* if incoming security failed, received UCD will be discarded */
+#endif
+    BOOLEAN     role_master;            /* TRUE if current mode is master     */
+    UINT16      security_required;      /* Security required for connection   */
+    BOOLEAN     link_key_not_sent;      /* link key notification has not been sent waiting for name */
+    UINT8       link_key_type;          /* Type of key used in pairing   */
+    BOOLEAN     link_key_changed;       /* Changed link key during current connection */
+
+#define BTM_SM4_UNKNOWN     0x00
+#define BTM_SM4_KNOWN       0x10
+#define BTM_SM4_TRUE        0x11
+#define BTM_SM4_REQ_PEND    0x08        /* set this bit when getting remote features */
+#define BTM_SM4_UPGRADE     0x04        /* set this bit when upgrading link key */
+#define BTM_SM4_RETRY       0x02        /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */
+#define BTM_SM4_DD_ACP      0x20        /* set this bit to indicate peer initiated dedicated bonding */
+#define BTM_SM4_CONN_PEND   0x40        /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */
+    UINT8       sm4;                    /* BTM_SM4_TRUE, if the peer supports SM4 */
+    tBTM_IO_CAP rmt_io_caps;            /* IO capability of the peer device */
+    BOOLEAN     rmt_auth_req;           /* the auth_req flag as in the IO caps rsp evt */
+
+#if (BLE_INCLUDED == TRUE)
+    UINT8               enc_key_size;           /* current link encryption key size */
+    tBTM_SEC_BLE        ble;
+    tBT_DEVICE_TYPE     device_type;
+    tBTM_LE_CONN_PRAMS  conn_params;
+#endif
+
+// btla-specific ++
+#if BTM_DISC_DURING_RS == TRUE
+#define BTM_SEC_RS_NOT_PENDING          0           /* Role Switch not in progress */
+#define BTM_SEC_RS_PENDING              1           /* Role Switch in progress */
+#define BTM_SEC_DISC_PENDING            2           /* Disconnect is pending */
+    UINT8           rs_disc_pending;
+#endif
+// btla-specific --
+} tBTM_SEC_DEV_REC;
+
+#define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE)))
+#define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE)))
+#define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE)))
+
+
+/*
+** Define device configuration structure
+*/
+typedef struct
+{
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+    tBTM_LOC_BD_NAME bd_name;                    /* local Bluetooth device name */
+#endif
+    BOOLEAN          pin_type;                   /* TRUE if PIN type is fixed */
+    UINT8            pin_code_len;               /* Bonding information */
+    PIN_CODE         pin_code;                   /* PIN CODE if pin type is fixed */
+    BOOLEAN          connectable;                /* If TRUE page scan should be enabled */
+    UINT8            def_inq_scan_mode;          /* ??? limited/general/none */
+} tBTM_CFG;
+
+#if BTM_PWR_MGR_INCLUDED == TRUE
+enum
+{
+    BTM_PM_ST_ACTIVE  = BTM_PM_STS_ACTIVE,
+    BTM_PM_ST_HOLD    = BTM_PM_STS_HOLD,
+    BTM_PM_ST_SNIFF   = BTM_PM_STS_SNIFF,
+    BTM_PM_ST_PARK    = BTM_PM_STS_PARK,
+    BTM_PM_ST_PENDING = BTM_PM_STS_PENDING
+};
+typedef UINT8 tBTM_PM_STATE;
+
+enum
+{
+    BTM_PM_SET_MODE_EVT,    /* Set power mode API is called. */
+    BTM_PM_UPDATE_EVT,
+    BTM_PM_RD_MODE_EVT     /* Read power mode API is called. */
+};
+typedef UINT8 tBTM_PM_EVENT;
+
+typedef struct
+{
+    UINT16          event;
+    UINT16          len;
+    UINT8           link_ind;
+} tBTM_PM_MSG_DATA;
+
+typedef struct
+{
+    UINT8 hci_status;
+    UINT8 mode;
+    UINT16 interval;
+} tBTM_PM_MD_CHG_DATA;
+
+typedef struct
+{
+    UINT8          pm_id;      /* the entity that calls SetPowerMode API */
+    tBTM_PM_PWR_MD *p_pmd;
+} tBTM_PM_SET_MD_DATA;
+
+typedef struct
+{
+    void        *p_data;
+    UINT8        link_ind;
+} tBTM_PM_SM_DATA;
+
+typedef struct
+{
+    tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/
+    tBTM_PM_PWR_MD set_mode;  /* the mode and parameters sent down to the host controller. */
+    UINT16         interval;  /* the interval from last mode change event. */
+#if (BTM_SSR_INCLUDED == TRUE)
+    UINT16         max_lat;   /* stored SSR maximum latency */
+    UINT16         min_rmt_to;/* stored SSR minimum remote timeout */
+    UINT16         min_loc_to;/* stored SSR minimum local timeout */
+#endif
+    tBTM_PM_STATE  state;     /* contains the current mode of the connection */
+    BOOLEAN        chg_ind;   /* a request change indication */
+} tBTM_PM_MCB;
+
+#define BTM_PM_REC_NOT_USED 0
+typedef struct
+{
+    tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */
+    UINT8                 mask; /* registered request mask. 0, if this entry is not used */
+} tBTM_PM_RCB;
+#endif  /* BTM_PWR_MGR_INCLUDED */
+
+enum
+{
+    BTM_BLI_ACL_UP_EVT,
+    BTM_BLI_ACL_DOWN_EVT,
+    BTM_BLI_PAGE_EVT,
+    BTM_BLI_PAGE_DONE_EVT,
+    BTM_BLI_INQ_EVT,
+    BTM_BLI_INQ_CANCEL_EVT,
+    BTM_BLI_INQ_DONE_EVT
+};
+typedef UINT8 tBTM_BLI_EVENT;
+
+/* Pairing State */
+enum
+{
+    BTM_PAIR_STATE_IDLE,                        /* Idle                                         */
+    BTM_PAIR_STATE_GET_REM_NAME,                /* Getting the remote name (to check for SM4)   */
+    BTM_PAIR_STATE_WAIT_PIN_REQ,                /* Started authentication, waiting for PIN req (PIN is pre-fetched) */
+    BTM_PAIR_STATE_WAIT_LOCAL_PIN,              /* Waiting for local PIN code                   */
+    BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM,        /* Waiting user 'yes' to numeric confirmation   */
+    BTM_PAIR_STATE_KEY_ENTRY,                   /* Key entry state (we are a keyboard)          */
+    BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP,          /* Waiting for local response to peer OOB data  */
+    BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS,           /* Waiting for local IO capabilities and OOB data */
+    BTM_PAIR_STATE_INCOMING_SSP,                /* Incoming SSP (got peer IO caps when idle)    */
+    BTM_PAIR_STATE_WAIT_AUTH_COMPLETE,          /* All done, waiting authentication cpmplete    */
+    BTM_PAIR_STATE_WAIT_DISCONNECT              /* Waiting to disconnect the ACL                */
+};
+typedef UINT8 tBTM_PAIRING_STATE;
+
+#define BTM_PAIR_FLAGS_WE_STARTED_DD    0x01    /* We want to do dedicated bonding              */
+#define BTM_PAIR_FLAGS_PEER_STARTED_DD  0x02    /* Peer initiated dedicated bonding             */
+#define BTM_PAIR_FLAGS_DISC_WHEN_DONE   0x04
+#define BTM_PAIR_FLAGS_PIN_REQD         0x08    /* set this bit when pin_callback is called     */
+#define BTM_PAIR_FLAGS_PRE_FETCH_PIN    0x10    /* set this bit when pre-fetch pin     */
+#define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20    /* set this bit when rejected incoming connection  */
+
+typedef struct
+{
+    BOOLEAN             is_mux;
+    BD_ADDR             bd_addr;
+    UINT16              psm;
+    BOOLEAN             is_orig;
+    tBTM_SEC_CALLBACK   *p_callback;
+    void                *p_ref_data;
+    UINT32              mx_proto_id;
+    UINT32              mx_chan_id;
+} tBTM_SEC_QUEUE_ENTRY;
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+
+#define CONN_ORIENT_TERM                0x00    /* incoming connection oriented */
+#define CONN_ORIENT_ORIG                0x01    /* outgoing connection oriented */
+#define CONNLESS_TERM                   0x02    /* incoming connectionless      */
+#define CONNLESS_ORIG                   0x03    /* outgoing connectionless      */
+#define CONNECTION_TYPE_ORIG_MASK       0x01    /* mask for direction           */
+#define CONNECTION_TYPE_CONNLESS_MASK   0x02    /* mask for connectionless or not */
+typedef UINT8 CONNECTION_TYPE;
+
+#else
+
+#define CONN_ORIENT_TERM                FALSE
+#define CONN_ORIENT_ORIG                TRUE
+typedef BOOLEAN CONNECTION_TYPE;
+
+#endif /* (L2CAP_UCD_INCLUDED == TRUE) */
+
+/* Define a structure to hold all the BTM data
+*/
+
+#define BTM_STATE_BUFFER_SIZE  5                  /* size of state buffer */
+
+#if (BTM_PCM2_INCLUDED == TRUE)
+/* Define pcm2_action           */
+enum
+{
+    BTM_PCM2_ACT_NONE,
+    BTM_PCM2_ACT_SENT_ARC,
+    BTM_PCM2_READ_PARAM,
+    BTM_PCM2_WRITE_PARAM,
+};
+typedef UINT8 tBTM_PCM2_ACTION;
+#endif
+
+typedef struct
+{
+    tBTM_CFG    cfg;                        /* Device configuration */
+
+    /****************************************************
+    **      ACL Management
+    ****************************************************/
+    tACL_CONN   acl_db[MAX_L2CAP_LINKS];
+#if( RFCOMM_INCLUDED==TRUE)
+    UINT8       btm_scn[BTM_MAX_SCN];        /* current SCNs: TRUE if SCN is in use */
+#endif
+    UINT16      btm_def_link_policy;
+    UINT16      btm_def_link_super_tout;
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    tBTM_BL_EVENT_MASK     bl_evt_mask;
+    tBTM_BL_CHANGE_CB     *p_bl_changed_cb;    /* Callback for when Busy Level changed */
+#else
+    tBTM_ACL_DB_CHANGE_CB *p_acl_changed_cb;    /* Callback for when ACL DB changed */
+#endif
+
+    tBTM_LSTO_CBACK       *p_lsto_cback;  /* for link supervision timeout change event */
+
+    /****************************************************
+    **      Power Management
+    ****************************************************/
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS];   /* per ACL link */
+    tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */
+    UINT8       pm_pend_link;  /* the index of acl_db, which has a pending PM cmd */
+    UINT8       pm_pend_id;    /* the id pf the module, which has a pending PM cmd */
+#endif /* BTM_PWR_MGR_INCLUDED == TRUE */
+
+    /*****************************************************
+    **      Device control
+    *****************************************************/
+    tBTM_DEVCB  devcb;
+
+    /*****************************************************
+    **      BLE Device controllers
+    *****************************************************/
+#if (BLE_INCLUDED == TRUE)
+    tBTM_BLE_CB             ble_ctr_cb;
+
+    UINT16                  enc_handle;
+    BT_OCTET8               enc_rand;   /* received rand value from LTK request*/
+    UINT16                  ediv;       /* received ediv value from LTK request */
+    UINT8                   key_size;
+#endif
+
+                                            /* Packet types supported by the local device */
+    UINT16      btm_acl_pkt_types_supported;
+    UINT16      btm_sco_pkt_types_supported;
+
+
+    /*****************************************************
+    **      Inquiry
+    *****************************************************/
+    tBTM_INQUIRY_VAR_ST     btm_inq_vars;
+    tBTM_FILTER_CB          *p_inq_filter_cb;   /* Callback that can be set if host */
+                                                /* wants to verify inquiry filters */
+
+    /*****************************************************
+    **      SCO Management
+    *****************************************************/
+#if BTM_SCO_INCLUDED == TRUE
+    tSCO_CB             sco_cb;
+#endif
+
+    /*****************************************************
+    **      Security Management
+    *****************************************************/
+    tBTM_APPL_INFO          api;
+
+#define BTM_SEC_MAX_RMT_NAME_CALLBACKS  2
+    tBTM_RMT_NAME_CALLBACK  *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS];
+
+    tBTM_FILTER_CB          *p_conn_filter_cb;  /* Callback that can be set if host */
+                                                /* wants to verify connectability filters*/
+
+    tBTM_SEC_DEV_REC        *p_collided_dev_rec;
+    TIMER_LIST_ENT           sec_collision_tle;
+    UINT32                   collision_start_time;
+    UINT32                   max_collision_delay;
+    UINT32                   dev_rec_count;      /* Counter used for device record timestamp */
+    UINT8                    security_mode;
+    BOOLEAN                  pairing_disabled;
+    BOOLEAN                  connect_only_paired;
+    BOOLEAN                  security_mode_changed;  /* mode changed during bonding */
+    BOOLEAN                  pin_type_changed;       /* pin type changed during bonding */
+    BOOLEAN                  sec_req_pending;       /*   TRUE if a request is pending */
+// btla-specific ++
+#ifdef PORCHE_PAIRING_CONFLICT
+    UINT8                    pin_code_len_saved;     /* for legacy devices */
+#endif
+// btla-specific --
+
+    UINT8                    pin_code_len;  /* for legacy devices */
+    PIN_CODE                 pin_code;      /* for legacy devices */
+    tBTM_PAIRING_STATE       pairing_state; /* The current pairing state    */
+    UINT8                    pairing_flags; /* The current pairing flags    */
+    BD_ADDR                  pairing_bda;   /* The device currently pairing */
+    TIMER_LIST_ENT           pairing_tle;   /* Timer for pairing process    */
+    UINT16                   disc_handle;   /* for legacy devices */
+    UINT8                    disc_reason;   /* for legacy devices */
+    tBTM_SEC_SERV_REC        sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS];
+    tBTM_SEC_DEV_REC         sec_dev_rec[BTM_SEC_MAX_DEVICE_RECORDS];
+    tBTM_SEC_SERV_REC       *p_out_serv;
+    tBTM_MKEY_CALLBACK      *mkey_cback;
+
+    BD_ADDR                  connecting_bda;
+    DEV_CLASS                connecting_dc;
+
+    UINT8                   first_disabled_channel;
+    UINT8                   last_disabled_channel;
+
+    UINT8                   acl_disc_reason;
+    UINT8                   trace_level;
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    UINT8                   num_acl;    /* num of active ACL links */
+    UINT8                   busy_level; /* the current busy level */
+    BOOLEAN                 is_paging;  /* TRUE, if paging is in progess */
+    BOOLEAN                 is_inquiry; /* TRUE, if inquiry is in progess */
+#endif
+    BUFFER_Q                page_queue;
+    BOOLEAN                 paging;
+    BOOLEAN                 discing;
+    BUFFER_Q                sec_pending_q;  /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */
+
+#if  (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE))
+    char state_temp_buffer[BTM_STATE_BUFFER_SIZE];
+#endif
+
+#if (defined(BTM_PCM2_INCLUDED) && BTM_PCM2_INCLUDED == TRUE)
+    UINT16                  sys_features;
+    UINT8                   pcm2_params[BRCM_PCM2_SETUP_WRITE_SIZE];
+    tBTM_PCM2_ACTION        pcm2_action;
+#endif
+
+} tBTM_CB;
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#if BTM_DYNAMIC_MEMORY == FALSE
+BTM_API extern tBTM_CB  btm_cb;
+#else
+BTM_API extern tBTM_CB *btm_cb_ptr;
+#define btm_cb (*btm_cb_ptr)
+#endif
+
+/* Internal functions provided by btm_main.c
+********************************************
+*/
+extern void         btm_init (void);
+
+/* Internal functions provided by btm_inq.c
+*******************************************
+*/
+extern tBTM_STATUS  btm_initiate_rem_name (BD_ADDR remote_bda,
+                                           tBTM_INQ_INFO *p_cur,
+                                           UINT8 origin, UINT32 timeout,
+                                           tBTM_CMPL_CB *p_cb);
+
+extern void         btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len,
+                                             UINT8 hci_status);
+extern void         btm_inq_rmt_name_failed(void);
+
+/* Inquiry related functions */
+extern void         btm_clr_inq_db (BD_ADDR p_bda);
+extern void         btm_inq_db_init (void);
+extern void         btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode);
+extern void         btm_process_inq_complete (UINT8 status, UINT8 mode);
+extern void         btm_event_filter_complete (UINT8 *p);
+extern void         btm_inq_stop_on_ssp(void);
+extern void         btm_inq_clear_ssp(void);
+extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda);
+extern BOOLEAN      btm_inq_find_bdaddr (BD_ADDR p_bda);
+
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr);
+#endif
+
+/* Internal functions provided by btm_acl.c
+********************************************
+*/
+extern void         btm_acl_init (void);
+extern void         btm_acl_timeout (TIMER_LIST_ENT  *p_tle);
+extern void         btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn,
+                                     UINT16 hci_handle, UINT8 link_role, UINT8 is_le_link);
+extern void         btm_acl_removed (BD_ADDR bda);
+extern void         btm_acl_device_down (void);
+extern void         btm_acl_update_busy_level (tBTM_BLI_EVENT event);
+extern void         btm_acl_link_key_change (UINT16 handle, UINT8 status);
+
+extern void         btm_cont_rswitch_or_chglinkkey (tACL_CONN *p,
+                                                    tBTM_SEC_DEV_REC *p_dev_rec,
+                                                    UINT8 hci_status);
+
+extern UINT8        btm_handle_to_acl_index (UINT16 hci_handle);
+extern void         btm_read_link_policy_complete (UINT8 *p);
+extern void         btm_read_rssi_complete (UINT8 *p);
+extern void         btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble);
+extern void         btm_read_link_quality_complete (UINT8 *p);
+extern tBTM_STATUS  btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types);
+extern void         btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset);
+extern void         btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role);
+extern void         btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable);
+BTM_API extern UINT16       btm_get_acl_disc_reason_code (void);
+BTM_API extern tBTM_STATUS  btm_remove_acl (BD_ADDR bd_addr);
+extern void         btm_read_remote_features_complete (UINT8 *p);
+extern void         btm_read_remote_ext_features_complete (UINT8 *p);
+extern void         btm_read_remote_ext_features_failed (UINT8 status);
+extern void         btm_read_remote_version_complete (UINT8 *p);
+// btla-specific ++
+extern void         btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type);
+// btla-specific --
+/* Read maximum data packet that can be sent over current connection */
+extern UINT16 btm_get_max_packet_size (BD_ADDR addr);
+extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda);
+extern BOOLEAN    btm_acl_notif_conn_collision (BD_ADDR bda);
+
+#if BTM_PWR_MGR_INCLUDED == FALSE
+extern void         btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode,
+                                             UINT16 interval);
+
+/* Internal functions provided by btm_pm.c
+********************************************
+*/
+#else
+extern void btm_pm_reset(void);
+extern void btm_pm_sm_alloc(UINT8 ind);
+extern void btm_pm_proc_cmd_status(UINT8 status);
+extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode,
+                                     UINT16 interval);
+extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len);
+#if BTM_SCO_INCLUDED == TRUE
+extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle);
+#else
+#define btm_sco_chk_pend_unpark(hci_status, hci_handle)
+#endif /* BTM_SCO_INCLUDED */
+#endif /* BTM_PWR_MGR_INCLUDED == FALSE */
+extern void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow);
+
+
+/* Internal functions provided by btm_sco.c
+********************************************
+*/
+extern void btm_sco_init (void);
+extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle,
+                               tBTM_ESCO_DATA *p_esco_data);
+extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval,
+                                    UINT8 retrans_window, UINT16 rx_pkt_len,
+                                    UINT16 tx_pkt_len);
+extern void btm_sco_conn_req (BD_ADDR bda,  DEV_CLASS dev_class, UINT8 link_type);
+extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason);
+extern void btm_sco_acl_removed (BD_ADDR bda);
+extern void btm_route_sco_data (BT_HDR *p_msg);
+extern BOOLEAN btm_is_sco_active (UINT16 handle);
+extern void btm_remove_sco_links (BD_ADDR bda);
+extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda);
+
+extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms);
+extern UINT16  btm_find_scb_by_handle (UINT16 handle);
+extern void btm_sco_flush_sco_data(UINT16 sco_inx);
+
+/* Internal functions provided by btm_devctl.c
+**********************************************
+*/
+extern void btm_dev_init (void);
+extern void btm_dev_absent (void);
+extern void btm_dev_timeout (TIMER_LIST_ENT *p_tle);
+extern void btm_reset_complete (void);
+extern void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_get_local_features (void);
+
+#if (BLE_INCLUDED == TRUE)
+extern void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len);
+extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len);
+extern void btm_ble_add_2_white_list_complete(UINT8 *p, UINT16 evt_len);
+extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len);
+extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len);
+#endif  /* BLE_INCLUDED */
+
+/* Vendor Specific Command complete evt handler */
+extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len,
+                              tBTM_CMPL_CB *p_vsc_cplt_cback);
+extern void btm_inq_db_reset (void);
+extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len);
+extern UINT8 btm_get_hci_version (void);
+extern void btm_read_stored_link_key_complete (UINT8 *p);
+extern void btm_write_stored_link_key_complete (UINT8 *p);
+extern void btm_delete_stored_link_key_complete (UINT8 *p);
+extern void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result);
+extern void btm_report_device_status (tBTM_DEV_STATUS status);
+
+
+/* Internal functions provided by btm_dev.c
+**********************************************
+*/
+extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr);
+extern UINT8 btm_get_voice_coding_support (void);
+
+extern tBTM_SEC_DEV_REC  *btm_sec_alloc_dev (BD_ADDR bd_addr);
+extern void               btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec);
+extern tBTM_SEC_DEV_REC  *btm_find_dev (BD_ADDR bd_addr);
+extern tBTM_SEC_DEV_REC  *btm_find_or_alloc_dev (BD_ADDR bd_addr);
+extern tBTM_SEC_DEV_REC  *btm_find_dev_by_handle (UINT16 handle);
+
+/* Internal functions provided by btm_sec.c
+**********************************************
+*/
+extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr);
+extern tBTM_STATUS  btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm,
+                                       UINT16 handle, CONNECTION_TYPE conn_type,
+                                       tBTM_SEC_CALLBACK *p_callback, void *p_ref_data);
+extern tBTM_STATUS  btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator,
+                                        UINT32 mx_proto_id, UINT32 mx_chan_id,
+                                        tBTM_SEC_CALLBACK *p_callback, void *p_ref_data);
+extern void  btm_sec_conn_req (UINT8 *bda, UINT8 *dc);
+extern void btm_create_conn_cancel_complete (UINT8 *p);
+extern void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout);
+extern void btm_read_linq_tx_power_complete (UINT8 *p);
+
+extern void  btm_sec_init (UINT8 sec_mode);
+extern void  btm_sec_dev_reset (void);
+extern void  btm_sec_abort_access_req (BD_ADDR bd_addr);
+extern void  btm_sec_auth_complete (UINT16 handle, UINT8 status);
+extern void  btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg);
+extern void  btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable);
+extern void  btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode);
+extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason);
+extern void  btm_sec_disconnected (UINT16 handle, UINT8 reason);
+extern void  btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status);
+extern void  btm_sec_rmt_host_support_feat_evt (UINT8 *p);
+extern void  btm_io_capabilities_req (UINT8 *p);
+extern void  btm_io_capabilities_rsp (UINT8 *p);
+extern void  btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p);
+extern void  btm_keypress_notif_evt (UINT8 *p);
+extern void  btm_simple_pair_complete (UINT8 *p);
+extern void  btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type);
+extern void  btm_sec_link_key_request (UINT8 *p_bda);
+extern void  btm_sec_pin_code_request (UINT8 *p_bda);
+extern void  btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset);
+extern void  btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res);
+
+#if BLE_INCLUDED == TRUE
+extern void  btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC  *p_dev_rec);
+extern  BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC *p_rec);
+extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda);
+#endif /* BLE_INCLUDED */
+
+extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda);
+
+#if BTM_OOB_INCLUDED == TRUE
+extern void  btm_rem_oob_req (UINT8 *p);
+extern void  btm_read_local_oob_complete (UINT8 *p);
+#else
+#define btm_rem_oob_req(p)
+#define btm_read_local_oob_complete(p)
+#endif
+
+extern void  btm_acl_resubmit_page (void);
+extern void  btm_acl_reset_paging (void);
+extern void  btm_acl_paging (BT_HDR *p, BD_ADDR dest);
+extern void  btm_acl_set_discing (BOOLEAN discing);
+extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm);
+
+#ifdef BRCM_VS
+extern void btm_brcm_feat_init(void);
+extern void btm_vs_reset_complete (void);
+extern void btm_brcm_arc_init (void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/stack/btm/btm_main.c b/stack/btm/btm_main.c
new file mode 100644
index 0000000..f3037f6
--- /dev/null
+++ b/stack/btm/btm_main.c
@@ -0,0 +1,70 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the definition of the btm control block when
+ *  BTM_DYNAMIC_MEMORY is used.
+ *
+ ******************************************************************************/
+
+#include "bt_types.h"
+#include "bt_target.h"
+#include <string.h>
+#include "btm_int.h"
+
+/* Global BTM control block structure
+*/
+#if BTM_DYNAMIC_MEMORY == FALSE
+tBTM_CB  btm_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         btm_init
+**
+** Description      This function is called at BTM startup to allocate the
+**                  control block (if using dynamic memory), and initializes the
+**                  tracing level.  It then initializes the various components of
+**                  btm.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_init (void)
+{
+    /* All fields are cleared; nonzero fields are reinitialized in appropriate function */
+    memset(&btm_cb, 0, sizeof(tBTM_CB));
+
+#if defined(BTM_INITIAL_TRACE_LEVEL)
+    btm_cb.trace_level = BTM_INITIAL_TRACE_LEVEL;
+#else
+    btm_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+    /* Initialize BTM component structures */
+    btm_inq_db_init();                  /* Inquiry Database and Structures */
+    btm_acl_init();                     /* ACL Database and Structures */
+    btm_sec_init(BTM_SEC_MODE_SP);      /* Security Manager Database and Structures */
+#if BTM_SCO_INCLUDED == TRUE
+    btm_sco_init();                     /* SCO Database and Structures (If included) */
+#endif
+
+    btm_dev_init();                     /* Device Manager Structures & HCI_Reset */
+}
+
+
diff --git a/stack/btm/btm_pm.c b/stack/btm/btm_pm.c
new file mode 100644
index 0000000..19b90d3
--- /dev/null
+++ b/stack/btm/btm_pm.c
@@ -0,0 +1,998 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains functions that manages ACL link modes.
+ *  This includes operations such as active, hold,
+ *  park and sniff modes.
+ *
+ *  This module contains both internal and external (API)
+ *  functions. External (API) functions are distinguishable
+ *  by their names beginning with uppercase BTM.
+ *
+ *****************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stddef.h>
+#include "bt_types.h"
+#include "gki.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "l2c_int.h"
+#include "hcidefs.h"
+
+
+#if BTM_PWR_MGR_INCLUDED == TRUE
+
+/* This compile option is only useful when the FW has a bug
+ * it automatically uses single slot when entering SNIFF mode, but does not restore the setting
+ * This issue was found when A2DP link goes into sniff and existing sniff still has choppy audio.
+ * If this issue is seen, look for FW solution first.
+ * This work around code will be removed later. */
+#ifndef BTM_PM_SNIFF_SLOT_WORK_AROUND
+#define BTM_PM_SNIFF_SLOT_WORK_AROUND       FALSE
+#endif
+
+/*****************************************************************************/
+/*      to handle different modes                                            */
+/*****************************************************************************/
+#define BTM_PM_STORED_MASK      0x80 /* set this mask if the command is stored */
+#define BTM_PM_NUM_SET_MODES    3 /* only hold, sniff & park */
+
+/* Usage:  (ptr_features[ offset ] & mask )?TRUE:FALSE */
+/* offset to supported feature */
+const UINT8 btm_pm_mode_off[BTM_PM_NUM_SET_MODES] = {0,    0,    1};
+/* mask to supported feature */
+const UINT8 btm_pm_mode_msk[BTM_PM_NUM_SET_MODES] = {0x40, 0x80, 0x01};
+
+#define BTM_PM_GET_MD1      1
+#define BTM_PM_GET_MD2      2
+#define BTM_PM_GET_COMP     3
+
+const UINT8 btm_pm_md_comp_matrix[BTM_PM_NUM_SET_MODES*BTM_PM_NUM_SET_MODES] =
+{
+    BTM_PM_GET_COMP,
+    BTM_PM_GET_MD2,
+    BTM_PM_GET_MD2,
+
+    BTM_PM_GET_MD1,
+    BTM_PM_GET_COMP,
+    BTM_PM_GET_MD1,
+
+    BTM_PM_GET_MD1,
+    BTM_PM_GET_MD2,
+    BTM_PM_GET_COMP
+};
+
+/* function prototype */
+static int btm_pm_find_acl_ind(BD_ADDR remote_bda);
+static tBTM_STATUS btm_pm_snd_md_req( UINT8 pm_id, int link_ind, tBTM_PM_PWR_MD *p_mode );
+
+/*
+#ifdef BTM_PM_DEBUG
+#undef BTM_PM_DEBUG
+#define BTM_PM_DEBUG    TRUE
+#endif
+*/
+
+#if BTM_PM_DEBUG == TRUE
+const char * btm_pm_state_str[] =
+{
+    "pm_active_state",
+    "pm_hold_state",
+    "pm_sniff_state",
+    "pm_park_state",
+    "pm_pend_state"
+};
+
+const char * btm_pm_event_str[] =
+{
+    "pm_set_mode_event",
+    "pm_hci_sts_event",
+    "pm_mod_chg_event",
+    "pm_update_event"
+};
+
+const char * btm_pm_action_str[] =
+{
+    "pm_set_mode_action",
+    "pm_update_db_action",
+    "pm_mod_chg_action",
+    "pm_hci_sts_action",
+    "pm_update_action"
+};
+#endif
+
+/*****************************************************************************/
+/*                     P U B L I C  F U N C T I O N S                        */
+/*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_PmRegister
+**
+** Description      register or deregister with power manager
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_NO_RESOURCES if no room to hold registration
+**                  BTM_ILLEGAL_VALUE
+**
+*******************************************************************************/
+tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, tBTM_PM_STATUS_CBACK *p_cb)
+{
+    int xx;
+
+    /* de-register */
+    if(mask & BTM_PM_DEREG)
+    {
+        if(*p_pm_id >= BTM_MAX_PM_RECORDS)
+            return BTM_ILLEGAL_VALUE;
+        btm_cb.pm_reg_db[*p_pm_id].mask = BTM_PM_REC_NOT_USED;
+        return BTM_SUCCESS;
+    }
+
+    for(xx=0; xx<BTM_MAX_PM_RECORDS; xx++)
+    {
+        /* find an unused entry */
+        if(btm_cb.pm_reg_db[xx].mask == BTM_PM_REC_NOT_USED)
+        {
+            /* if register for notification, should provide callback routine */
+            if(mask & BTM_PM_REG_NOTIF)
+            {
+                if(p_cb == NULL)
+                    return BTM_ILLEGAL_VALUE;
+                btm_cb.pm_reg_db[xx].cback = p_cb;
+            }
+            btm_cb.pm_reg_db[xx].mask = mask;
+            *p_pm_id = xx;
+            return BTM_SUCCESS;
+        }
+    }
+
+    return BTM_NO_RESOURCES;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetPowerMode
+**
+** Description      store the mode in control block or
+**                  alter ACL connection behavior.
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda, tBTM_PM_PWR_MD *p_mode)
+{
+    UINT8               *p_features;
+    int               ind, acl_ind;
+    tBTM_PM_MCB *p_cb = NULL;   /* per ACL link */
+    tBTM_PM_MODE        mode;
+    int                 temp_pm_id;
+
+
+    if(pm_id >= BTM_MAX_PM_RECORDS)
+        pm_id = BTM_PM_SET_ONLY_ID;
+
+    if(p_mode == NULL)
+        return BTM_ILLEGAL_VALUE;
+
+    BTM_TRACE_API3( "BTM_SetPowerMode: pm_id %d BDA: %08x mode:0x%x", pm_id,
+                   (remote_bda[2]<<24)+(remote_bda[3]<<16)+(remote_bda[4]<<8)+remote_bda[5], p_mode->mode);
+
+    /* take out the force bit */
+    mode = p_mode->mode & ~BTM_PM_MD_FORCE;
+
+    acl_ind = btm_pm_find_acl_ind(remote_bda);
+    if(acl_ind == MAX_L2CAP_LINKS)
+        return (BTM_UNKNOWN_ADDR);
+
+    p_cb = &(btm_cb.pm_mode_db[acl_ind]);
+
+    if(mode != BTM_PM_MD_ACTIVE)
+    {
+        /* check if the requested mode is supported */
+        ind = mode - BTM_PM_MD_HOLD; /* make it base 0 */
+        p_features = BTM_ReadLocalFeatures();
+        if( !(p_features[ btm_pm_mode_off[ind] ] & btm_pm_mode_msk[ind] ) )
+            return BTM_MODE_UNSUPPORTED;
+    }
+
+    if(mode == p_cb->state) /* the requested mode is current mode */
+    {
+        /* already in the requested mode and the current interval has less latency than the max */
+        if( (mode == BTM_PM_MD_ACTIVE) ||
+            ((p_mode->mode & BTM_PM_MD_FORCE) && (p_mode->max >= p_cb->interval) && (p_mode->min <= p_cb->interval)) ||
+            ((p_mode->mode & BTM_PM_MD_FORCE)==0 && (p_mode->max >= p_cb->interval)) )
+        {
+            BTM_TRACE_DEBUG4( "BTM_SetPowerMode: mode:0x%x interval %d max:%d, min:%d", p_mode->mode, p_cb->interval, p_mode->max, p_mode->min);
+            return BTM_SUCCESS;
+        }
+    }
+
+    temp_pm_id = pm_id;
+    if(pm_id == BTM_PM_SET_ONLY_ID)
+        temp_pm_id = BTM_MAX_PM_RECORDS;
+
+    /* update mode database */
+    if( ((pm_id != BTM_PM_SET_ONLY_ID) &&
+         (btm_cb.pm_reg_db[pm_id].mask & BTM_PM_REG_SET))
+       || ((pm_id == BTM_PM_SET_ONLY_ID) && (btm_cb.pm_pend_link != MAX_L2CAP_LINKS)) )
+    {
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2( "BTM_SetPowerMode: Saving cmd acl_ind %d temp_pm_id %d", acl_ind,temp_pm_id);
+#endif
+        /* Make sure mask is set to BTM_PM_REG_SET */
+        btm_cb.pm_reg_db[temp_pm_id].mask |= BTM_PM_REG_SET;
+        *(&p_cb->req_mode[temp_pm_id]) = *((tBTM_PM_PWR_MD *)p_mode);
+        p_cb->chg_ind = TRUE;
+    }
+
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2( "btm_pm state:0x%x, pm_pend_link: %d", p_cb->state, btm_cb.pm_pend_link);
+#endif
+    /* if mode == hold or pending, return */
+    if( (p_cb->state == BTM_PM_STS_HOLD) ||
+        (p_cb->state ==  BTM_PM_STS_PENDING) ||
+        (btm_cb.pm_pend_link != MAX_L2CAP_LINKS) ) /* command pending */
+    {
+        if(acl_ind != btm_cb.pm_pend_link)
+        {
+            /* set the stored mask */
+            p_cb->state |= BTM_PM_STORED_MASK;
+            BTM_TRACE_DEBUG1( "btm_pm state stored:%d",acl_ind);
+        }
+        return BTM_CMD_STORED;
+    }
+
+
+
+    return btm_pm_snd_md_req(pm_id, acl_ind, p_mode);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadPowerMode
+**
+** Description      This returns the current mode for a specific
+**                  ACL connection.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**
+** Output Param     p_mode - address where the current mode is copied into.
+**                          BTM_ACL_MODE_NORMAL
+**                          BTM_ACL_MODE_HOLD
+**                          BTM_ACL_MODE_SNIFF
+**                          BTM_ACL_MODE_PARK
+**                          (valid only if return code is BTM_SUCCESS)
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, tBTM_PM_MODE *p_mode)
+{
+    int acl_ind;
+
+    if( (acl_ind = btm_pm_find_acl_ind(remote_bda)) == MAX_L2CAP_LINKS)
+        return (BTM_UNKNOWN_ADDR);
+
+    *p_mode = btm_cb.pm_mode_db[acl_ind].state;
+    return BTM_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetSsrParams
+**
+** Description      This sends the given SSR parameters for the given ACL
+**                  connection if it is in ACTIVE mode.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**                  max_lat    - maximum latency (in 0.625ms)(0-0xFFFE)
+**                  min_rmt_to - minimum remote timeout
+**                  min_loc_to - minimum local timeout
+**
+**
+** Returns          BTM_SUCCESS if the HCI command is issued successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**                  BTM_CMD_STORED if the command is stored
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat,
+                              UINT16 min_rmt_to, UINT16 min_loc_to)
+{
+#if (BTM_SSR_INCLUDED == TRUE)
+    int acl_ind;
+    tBTM_PM_MCB *p_cb;
+
+    if( (acl_ind = btm_pm_find_acl_ind(remote_bda)) == MAX_L2CAP_LINKS)
+        return (BTM_UNKNOWN_ADDR);
+
+    if(BTM_PM_STS_ACTIVE == btm_cb.pm_mode_db[acl_ind].state ||
+        BTM_PM_STS_SNIFF == btm_cb.pm_mode_db[acl_ind].state)
+    {
+        if (btsnd_hcic_sniff_sub_rate(btm_cb.acl_db[acl_ind].hci_handle, max_lat,
+                                      min_rmt_to, min_loc_to))
+            return BTM_SUCCESS;
+        else
+            return BTM_NO_RESOURCES;
+    }
+    p_cb = &btm_cb.pm_mode_db[acl_ind];
+    p_cb->max_lat       = max_lat;
+    p_cb->min_rmt_to    = min_rmt_to;
+    p_cb->min_loc_to    = min_loc_to;
+    return BTM_CMD_STORED;
+#else
+    return BTM_ILLEGAL_ACTION;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_pm_reset
+**
+** Description      as a part of the BTM reset process.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_pm_reset(void)
+{
+    int xx;
+    tBTM_PM_STATUS_CBACK *cb = NULL;
+
+    /* clear the pending request for application */
+    if( (btm_cb.pm_pend_id != BTM_PM_SET_ONLY_ID) &&
+        (btm_cb.pm_reg_db[btm_cb.pm_pend_id].mask & BTM_PM_REG_NOTIF) )
+    {
+        cb = btm_cb.pm_reg_db[btm_cb.pm_pend_id].cback;
+    }
+
+    /* no command pending */
+    btm_cb.pm_pend_link = MAX_L2CAP_LINKS;
+
+    /* clear the register record */
+    for(xx=0; xx<BTM_MAX_PM_RECORDS; xx++)
+    {
+        btm_cb.pm_reg_db[xx].mask = BTM_PM_REC_NOT_USED;
+    }
+
+    if(cb != NULL)
+        (*cb)(btm_cb.acl_db[btm_cb.pm_pend_link].remote_addr, BTM_PM_STS_ERROR, BTM_DEV_RESET, 0);
+}
+
+/*******************************************************************************
+**
+** Function         btm_pm_sm_alloc
+**
+** Description      This function initializes the control block of an ACL link.
+**                  It is called when an ACL connection is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_pm_sm_alloc(UINT8 ind)
+{
+    tBTM_PM_MCB *p_db = &btm_cb.pm_mode_db[ind];   /* per ACL link */
+    memset (p_db, 0, sizeof(tBTM_PM_MCB));
+    p_db->state = BTM_PM_ST_ACTIVE;
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2( "btm_pm_sm_alloc ind:%d st:%d", ind, p_db->state);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_pm_find_acl_ind
+**
+** Description      This function initializes the control block of an ACL link.
+**                  It is called when an ACL connection is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+static int btm_pm_find_acl_ind(BD_ADDR remote_bda)
+{
+    tACL_CONN   *p = &btm_cb.acl_db[0];
+    UINT8 xx;
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p++)
+    {
+        if ((p->in_use) && (!memcmp (p->remote_addr, remote_bda, BD_ADDR_LEN)))
+        {
+#if BTM_PM_DEBUG == TRUE
+            BTM_TRACE_DEBUG2( "btm_pm_find_acl_ind ind:%d, st:%d", xx, btm_cb.pm_mode_db[xx].state);
+#endif
+            break;
+        }
+    }
+    return xx;
+}
+
+/*******************************************************************************
+**
+** Function     btm_pm_compare_modes
+** Description  get the "more active" mode of the 2
+** Returns      void
+**
+*******************************************************************************/
+static tBTM_PM_PWR_MD * btm_pm_compare_modes(tBTM_PM_PWR_MD *p_md1, tBTM_PM_PWR_MD *p_md2, tBTM_PM_PWR_MD *p_res)
+{
+    UINT8 res;
+
+    if(p_md1 == NULL)
+    {
+        *p_res = *p_md2;
+        p_res->mode &= ~BTM_PM_MD_FORCE;
+
+        return p_md2;
+    }
+
+    if(p_md2->mode == BTM_PM_MD_ACTIVE || p_md1->mode == BTM_PM_MD_ACTIVE)
+    {
+        return NULL;
+    }
+
+    /* check if force bit is involved */
+    if(p_md1->mode & BTM_PM_MD_FORCE)
+    {
+        *p_res = *p_md1;
+        p_res->mode &= ~BTM_PM_MD_FORCE;
+        return p_res;
+    }
+
+    if(p_md2->mode & BTM_PM_MD_FORCE)
+    {
+        *p_res = *p_md2;
+        p_res->mode &= ~BTM_PM_MD_FORCE;
+        return p_res;
+    }
+
+    res = (p_md1->mode - 1) * BTM_PM_NUM_SET_MODES + (p_md2->mode - 1);
+    res = btm_pm_md_comp_matrix[res];
+    switch(res)
+    {
+    case BTM_PM_GET_MD1:
+        *p_res = *p_md1;
+        return p_md1;
+
+    case BTM_PM_GET_MD2:
+        *p_res = *p_md2;
+        return p_md2;
+
+    case BTM_PM_GET_COMP:
+        p_res->mode = p_md1->mode;
+        /* min of the two */
+        p_res->max  = (p_md1->max < p_md2->max)? (p_md1->max) : (p_md2->max);
+        /* max of the two */
+        p_res->min  = (p_md1->min > p_md2->min)? (p_md1->min) : (p_md2->min);
+
+        /* the intersection is NULL */
+        if( p_res->max < p_res->min)
+            return NULL;
+
+        if(p_res->mode == BTM_PM_MD_SNIFF)
+        {
+            /* max of the two */
+            p_res->attempt  = (p_md1->attempt > p_md2->attempt)? (p_md1->attempt) : (p_md2->attempt);
+            p_res->timeout  = (p_md1->timeout > p_md2->timeout)? (p_md1->timeout) : (p_md2->timeout);
+        }
+        return p_res;
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function     btm_pm_get_set_mode
+** Description  get the resulting mode from the registered parties, then compare it
+**              with the requested mode, if the command is from an unregistered party.
+** Returns      void
+**
+*******************************************************************************/
+static tBTM_PM_MODE btm_pm_get_set_mode(UINT8 pm_id, tBTM_PM_MCB *p_cb, tBTM_PM_PWR_MD *p_mode, tBTM_PM_PWR_MD *p_res)
+{
+    int   xx, loop_max;
+    tBTM_PM_PWR_MD *p_md = NULL;
+
+    if(p_mode != NULL && p_mode->mode & BTM_PM_MD_FORCE)
+    {
+        *p_res = *p_mode;
+        p_res->mode &= ~BTM_PM_MD_FORCE;
+        return p_res->mode;
+    }
+
+    if(!p_mode)
+        loop_max = BTM_MAX_PM_RECORDS+1;
+    else
+        loop_max = BTM_MAX_PM_RECORDS;
+
+    for( xx=0; xx<loop_max; xx++)
+    {
+        /* g through all the registered "set" parties */
+        if(btm_cb.pm_reg_db[xx].mask & BTM_PM_REG_SET)
+        {
+            if(p_cb->req_mode[xx].mode == BTM_PM_MD_ACTIVE)
+            {
+                /* if at least one registered (SET) party says ACTIVE, stay active */
+                return BTM_PM_MD_ACTIVE;
+            }
+            else
+            {
+                /* if registered parties give conflicting information, stay active */
+                if( (btm_pm_compare_modes(p_md, &p_cb->req_mode[xx], p_res)) == NULL)
+                    return BTM_PM_MD_ACTIVE;
+                p_md = p_res;
+            }
+        }
+    }
+
+    /* if the resulting mode is NULL(nobody registers SET), use the requested mode */
+    if(p_md == NULL)
+    {
+        if(p_mode)
+            *p_res = *((tBTM_PM_PWR_MD *)p_mode);
+        else /* p_mode is NULL when btm_pm_snd_md_req is called from btm_pm_proc_mode_change */
+            return BTM_PM_MD_ACTIVE;
+    }
+    else
+    {
+        /* if the command is from unregistered party,
+           compare the resulting mode from registered party*/
+        if( (pm_id == BTM_PM_SET_ONLY_ID) &&
+            ((btm_pm_compare_modes(p_mode, p_md, p_res)) == NULL) )
+            return BTM_PM_MD_ACTIVE;
+    }
+
+    return p_res->mode;
+}
+
+/*******************************************************************************
+**
+** Function     btm_pm_snd_md_req
+** Description  get the resulting mode and send the resuest to host controller
+** Returns      tBTM_STATUS
+**, BOOLEAN *p_chg_ind
+*******************************************************************************/
+static tBTM_STATUS btm_pm_snd_md_req(UINT8 pm_id, int link_ind, tBTM_PM_PWR_MD *p_mode)
+{
+    tBTM_PM_PWR_MD  md_res;
+    tBTM_PM_MODE    mode;
+    tBTM_PM_MCB *p_cb = &btm_cb.pm_mode_db[link_ind];
+    BOOLEAN      chg_ind = FALSE;
+
+    mode = btm_pm_get_set_mode(pm_id, p_cb, p_mode, &md_res);
+    md_res.mode = mode;
+
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2( "btm_pm_snd_md_req link_ind:%d, mode: %d",
+        link_ind, mode);
+#endif
+
+    if( p_cb->state == mode)
+    {
+        /* already in the resulting mode */
+        if( (mode == BTM_PM_MD_ACTIVE) ||
+            ((md_res.max >= p_cb->interval) && (md_res.min <= p_cb->interval)) )
+            return BTM_CMD_STORED;
+        /* Otherwise, needs to wake, then sleep */
+        chg_ind = TRUE;
+    }
+    p_cb->chg_ind = chg_ind;
+
+     /* cannot go directly from current mode to resulting mode. */
+    if( mode != BTM_PM_MD_ACTIVE && p_cb->state != BTM_PM_MD_ACTIVE)
+        p_cb->chg_ind = TRUE; /* needs to wake, then sleep */
+
+    if(p_cb->chg_ind == TRUE) /* needs to wake first */
+        md_res.mode = BTM_PM_MD_ACTIVE;
+#if (BTM_SSR_INCLUDED == TRUE)
+    else if(BTM_PM_MD_SNIFF == md_res.mode && p_cb->max_lat)
+    {
+        btsnd_hcic_sniff_sub_rate(btm_cb.acl_db[link_ind].hci_handle, p_cb->max_lat,
+                                  p_cb->min_rmt_to, p_cb->min_loc_to);
+        p_cb->max_lat = 0;
+    }
+#endif
+    /* Default is failure */
+    btm_cb.pm_pend_link = MAX_L2CAP_LINKS;
+
+    /* send the appropriate HCI command */
+    btm_cb.pm_pend_id   = pm_id;
+
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2("btm_pm_snd_md_req state:0x%x, link_ind: %d", p_cb->state, link_ind);
+#endif
+    switch(md_res.mode)
+    {
+    case BTM_PM_MD_ACTIVE:
+        switch(p_cb->state)
+        {
+        case BTM_PM_MD_SNIFF:
+            if (btsnd_hcic_exit_sniff_mode(btm_cb.acl_db[link_ind].hci_handle))
+            {
+                btm_cb.pm_pend_link = link_ind;
+            }
+            break;
+        case BTM_PM_MD_PARK:
+            if (btsnd_hcic_exit_park_mode(btm_cb.acl_db[link_ind].hci_handle))
+            {
+                btm_cb.pm_pend_link = link_ind;
+            }
+            break;
+        default:
+            /* Failure btm_cb.pm_pend_link = MAX_L2CAP_LINKS */
+            break;
+        }
+        break;
+
+    case BTM_PM_MD_HOLD:
+        if (btsnd_hcic_hold_mode (btm_cb.acl_db[link_ind].hci_handle,
+                                  md_res.max, md_res.min))
+        {
+            btm_cb.pm_pend_link = link_ind;
+        }
+        break;
+
+    case BTM_PM_MD_SNIFF:
+        if (btsnd_hcic_sniff_mode (btm_cb.acl_db[link_ind].hci_handle,
+                                   md_res.max, md_res.min, md_res.attempt,
+                                   md_res.timeout))
+        {
+            btm_cb.pm_pend_link = link_ind;
+        }
+        break;
+
+    case BTM_PM_MD_PARK:
+        if (btsnd_hcic_park_mode (btm_cb.acl_db[link_ind].hci_handle,
+                                  md_res.max, md_res.min))
+        {
+            btm_cb.pm_pend_link = link_ind;
+        }
+        break;
+    default:
+        /* Failure btm_cb.pm_pend_link = MAX_L2CAP_LINKS */
+        break;
+    }
+
+    if(btm_cb.pm_pend_link == MAX_L2CAP_LINKS)
+    {
+        /* the command was not sent */
+#if BTM_PM_DEBUG == TRUE
+        BTM_TRACE_DEBUG1( "pm_pend_link: %d",btm_cb.pm_pend_link);
+#endif
+        return (BTM_NO_RESOURCES);
+    }
+
+    return BTM_CMD_STARTED;
+}
+
+/*******************************************************************************
+**
+** Function         btm_pm_check_stored
+**
+** Description      This function is called when an HCI command status event occurs
+**                  to check if there's any PM command issued while waiting for
+**                  HCI command status.
+**
+** Returns          none.
+**
+*******************************************************************************/
+static void btm_pm_check_stored(void)
+{
+    int     xx;
+    for(xx=0; xx<MAX_L2CAP_LINKS; xx++)
+    {
+        if(btm_cb.pm_mode_db[xx].state & BTM_PM_STORED_MASK)
+        {
+            btm_cb.pm_mode_db[xx].state &= ~BTM_PM_STORED_MASK;
+            BTM_TRACE_DEBUG1( "btm_pm_check_stored :%d", xx);
+            btm_pm_snd_md_req(BTM_PM_SET_ONLY_ID, xx, NULL);
+            break;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_pm_proc_cmd_status
+**
+** Description      This function is called when an HCI command status event occurs
+**                  for power manager related commands.
+**
+** Input Parms      status - status of the event (HCI_SUCCESS if no errors)
+**
+** Returns          none.
+**
+*******************************************************************************/
+void btm_pm_proc_cmd_status(UINT8 status)
+{
+    tBTM_PM_MCB     *p_cb;
+    tBTM_PM_STATUS  pm_status;
+
+    if(btm_cb.pm_pend_link >= MAX_L2CAP_LINKS)
+        return;
+
+    p_cb = &btm_cb.pm_mode_db[btm_cb.pm_pend_link];
+
+    if(status == HCI_SUCCESS)
+    {
+        p_cb->state = BTM_PM_ST_PENDING;
+        pm_status = BTM_PM_STS_PENDING;
+#if BTM_PM_DEBUG == TRUE
+        BTM_TRACE_DEBUG1( "btm_pm_proc_cmd_status new state:0x%x", p_cb->state);
+#endif
+    }
+    else /* the command was not successfull. Stay in the same state */
+    {
+        pm_status = BTM_PM_STS_ERROR;
+    }
+
+    /* notify the caller is appropriate */
+    if( (btm_cb.pm_pend_id != BTM_PM_SET_ONLY_ID) &&
+        (btm_cb.pm_reg_db[btm_cb.pm_pend_id].mask & BTM_PM_REG_NOTIF) )
+    {
+        (*btm_cb.pm_reg_db[btm_cb.pm_pend_id].cback)(btm_cb.acl_db[btm_cb.pm_pend_link].remote_addr, pm_status, 0, status);
+    }
+
+    /* no pending cmd now */
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG3( "btm_pm_proc_cmd_status state:0x%x, pm_pend_link: %d(new: %d)",
+        p_cb->state, btm_cb.pm_pend_link, MAX_L2CAP_LINKS);
+#endif
+    btm_cb.pm_pend_link = MAX_L2CAP_LINKS;
+
+    btm_pm_check_stored();
+}
+
+/*******************************************************************************
+**
+** Function         btm_process_mode_change
+**
+** Description      This function is called when an HCI mode change event occurs.
+**
+** Input Parms      hci_status - status of the event (HCI_SUCCESS if no errors)
+**                  hci_handle - connection handle associated with the change
+**                  mode - HCI_MODE_ACTIVE, HCI_MODE_HOLD, HCI_MODE_SNIFF, or HCI_MODE_PARK
+**                  interval - number of baseband slots (meaning depends on mode)
+**
+** Returns          none.
+**
+*******************************************************************************/
+void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, UINT16 interval)
+{
+    tACL_CONN   *p;
+    tBTM_PM_MCB *p_cb = NULL;
+    int xx, yy, zz;
+    tBTM_PM_STATE  old_state;
+    tL2C_LCB        *p_lcb;
+
+    /* get the index to acl_db */
+    if ((xx = btm_handle_to_acl_index(hci_handle)) >= MAX_L2CAP_LINKS)
+        return;
+
+    p = &btm_cb.acl_db[xx];
+
+    /*** 2035 and 2045 work around:  If mode is active and coming out of a SCO disconnect, restore packet types ***/
+    if (mode == HCI_MODE_ACTIVE)
+    {
+        if(BTM_GetNumScoLinks() == 0)
+        {
+            if(p->restore_pkt_types)
+    {
+        BTM_TRACE_DEBUG3("btm mode change AFTER unsniffing; hci hdl 0x%x, types 0x%02x/0x%02x",
+                            hci_handle, p->pkt_types_mask, p->restore_pkt_types);
+        p->pkt_types_mask = p->restore_pkt_types;
+        p->restore_pkt_types = 0;   /* Only exists while SCO is active */
+        btsnd_hcic_change_conn_type (p->hci_handle, p->pkt_types_mask);
+    }
+#if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE)
+            else
+            {
+                BTM_TRACE_DEBUG2("btm mode change AFTER unsniffing; hci hdl 0x%x, types 0x%02x",
+                                    hci_handle, btm_cb.btm_acl_pkt_types_supported);
+                btm_set_packet_types (p, btm_cb.btm_acl_pkt_types_supported);
+            }
+#endif
+        }
+#if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE)
+        else
+        {
+            /* Mode changed from Sniff to Active while SCO is open. */
+            /* Packet types of active mode, not sniff mode, should be used for ACL when SCO is closed. */
+            p->restore_pkt_types = btm_cb.btm_acl_pkt_types_supported;
+
+            /* Exclude packet types not supported by the peer */
+            btm_acl_chk_peer_pkt_type_support (p, &p->restore_pkt_types);
+        }
+#endif
+    }
+#if (BTM_PM_SNIFF_SLOT_WORK_AROUND == TRUE)
+    else if (mode == HCI_MODE_SNIFF)
+    {
+        BTM_TRACE_DEBUG1("btm mode change to sniff; hci hdl 0x%x use single slot",
+                            hci_handle);
+        btm_set_packet_types (p, (HCI_PKT_TYPES_MASK_DM1 | HCI_PKT_TYPES_MASK_DH1));
+    }
+#endif
+
+    /* update control block */
+    p_cb = &(btm_cb.pm_mode_db[xx]);
+    old_state       = p_cb->state;
+    p_cb->state     = mode;
+    p_cb->interval  = interval;
+#if BTM_PM_DEBUG == TRUE
+    BTM_TRACE_DEBUG2( "btm_pm_proc_mode_change new state:0x%x (old:0x%x)", p_cb->state, old_state);
+#endif
+
+    if ((p_cb->state == HCI_MODE_ACTIVE) &&
+        ((p_lcb = l2cu_find_lcb_by_bd_addr (p->remote_addr)) != NULL))
+    {
+        /* There might be any pending packets due to SNIFF or PENDING state */
+        /* Trigger L2C to start transmission of the pending packets.        */
+        BTM_TRACE_DEBUG0 ("btm mode change to active; check l2c_link for outgoing packets");
+        l2c_link_check_send_pkts (p_lcb, NULL, NULL);
+
+        //btu_stop_timer (&p_lcb->timer_entry);
+    }
+
+    /* notify registered parties */
+    for(yy=0; yy<=BTM_MAX_PM_RECORDS; yy++)
+    {
+        /* set req_mode  HOLD mode->ACTIVE */
+        if( (mode == BTM_PM_MD_ACTIVE) && (p_cb->req_mode[yy].mode == BTM_PM_MD_HOLD) )
+            p_cb->req_mode[yy].mode = BTM_PM_MD_ACTIVE;
+    }
+
+    /* new request has been made. - post a message to BTU task */
+    if(old_state & BTM_PM_STORED_MASK)
+    {
+#if BTM_PM_DEBUG == TRUE
+        BTM_TRACE_DEBUG1( "btm_pm_proc_mode_change: Sending stored req:%d", xx);
+#endif
+        btm_pm_snd_md_req(BTM_PM_SET_ONLY_ID, xx, NULL);
+    }
+    else
+    {
+        for(zz=0; zz<MAX_L2CAP_LINKS; zz++)
+        {
+            if(btm_cb.pm_mode_db[zz].chg_ind == TRUE)
+            {
+#if BTM_PM_DEBUG == TRUE
+                BTM_TRACE_DEBUG1( "btm_pm_proc_mode_change: Sending PM req :%d", zz);
+#endif
+                btm_pm_snd_md_req(BTM_PM_SET_ONLY_ID, zz, NULL);
+                break;
+            }
+        }
+    }
+
+
+    /* notify registered parties */
+    for(yy=0; yy<BTM_MAX_PM_RECORDS; yy++)
+    {
+        if(btm_cb.pm_reg_db[yy].mask & BTM_PM_REG_NOTIF)
+        {
+            (*btm_cb.pm_reg_db[yy].cback)( p->remote_addr, mode, interval, hci_status);
+        }
+    }
+
+    /* If mode change was because of an active role switch or change link key */
+    btm_cont_rswitch_or_chglinkkey(p, btm_find_dev(p->remote_addr), hci_status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_pm_proc_ssr_evt
+**
+** Description      This function is called when an HCI sniff subrating event occurs.
+**
+** Returns          none.
+**
+*******************************************************************************/
+#if (BTM_SSR_INCLUDED == TRUE)
+void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT16      handle;
+    UINT16      max_tx_lat, max_rx_lat;
+    int         xx, yy;
+    tBTM_PM_MCB *p_cb;
+    tACL_CONN   *p_acl=NULL;
+    UINT16      use_ssr = TRUE;
+
+    STREAM_TO_UINT8 (status, p);
+
+    STREAM_TO_UINT16 (handle, p);
+    /* get the index to acl_db */
+    if ((xx = btm_handle_to_acl_index(handle)) >= MAX_L2CAP_LINKS)
+        return;
+
+    STREAM_TO_UINT16 (max_tx_lat, p);
+    STREAM_TO_UINT16 (max_rx_lat, p);
+    p_cb = &(btm_cb.pm_mode_db[xx]);
+
+    p_acl = &btm_cb.acl_db[xx];
+    if(p_cb->interval == max_rx_lat)
+    {
+        /* using legacy sniff */
+        use_ssr = FALSE;
+    }
+
+    /* notify registered parties */
+    for(yy=0; yy<BTM_MAX_PM_RECORDS; yy++)
+    {
+        if(btm_cb.pm_reg_db[yy].mask & BTM_PM_REG_NOTIF)
+        {
+            if( p_acl)
+            {
+                (*btm_cb.pm_reg_db[yy].cback)( p_acl->remote_addr, BTM_PM_STS_SSR, use_ssr, status);
+            }
+        }
+    }
+}
+#endif
+#else /* BTM_PWR_MGR_INCLUDED == TRUE */
+
+/*******************************************************************************
+**
+** Functions        BTM_PmRegister, BTM_SetPowerMode, and BTM_ReadPowerMode
+**
+** Description      Stubbed versions for BTM_PWR_MGR_INCLUDED = FALSE
+**
+** Returns          BTM_MODE_UNSUPPORTED.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id, tBTM_PM_STATUS_CBACK *p_cb)
+{
+    return BTM_MODE_UNSUPPORTED;
+}
+
+tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda, tBTM_PM_PWR_MD *p_mode)
+{
+    return BTM_MODE_UNSUPPORTED;
+}
+
+tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda, tBTM_PM_MODE *p_mode)
+{
+    return BTM_MODE_UNSUPPORTED;
+}
+
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_IsPowerManagerOn
+**
+** Description      This function is called to check if power manager is included.
+**                  in the BTE version.
+**
+** Returns          BTM_PWR_MGR_INCLUDED.
+**
+*******************************************************************************/
+BOOLEAN BTM_IsPowerManagerOn (void)
+{
+    return BTM_PWR_MGR_INCLUDED;
+}
diff --git a/stack/btm/btm_sco.c b/stack/btm/btm_sco.c
new file mode 100644
index 0000000..5a11404
--- /dev/null
+++ b/stack/btm/btm_sco.c
@@ -0,0 +1,1750 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that handle SCO connections. This includes
+ *  operations such as connect, disconnect, change supported packet types.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bt_types.h"
+#include "bt_target.h"
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "hcidefs.h"
+
+#if BTM_SCO_INCLUDED == TRUE
+
+/********************************************************************************/
+/*                 L O C A L    D A T A    D E F I N I T I O N S                */
+/********************************************************************************/
+
+#define SCO_ST_UNUSED           0
+#define SCO_ST_LISTENING        1
+#define SCO_ST_W4_CONN_RSP      2
+#define SCO_ST_CONNECTING       3
+#define SCO_ST_CONNECTED        4
+#define SCO_ST_DISCONNECTING    5
+#define SCO_ST_PEND_UNPARK      6
+#define SCO_ST_PEND_ROLECHANGE  7
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+
+static const tBTM_ESCO_PARAMS btm_esco_defaults =
+{
+    BTM_64KBITS_RATE,               /* TX Bandwidth (64 kbits/sec)              */
+    BTM_64KBITS_RATE,               /* RX Bandwidth (64 kbits/sec)              */
+    0x000a,                         /* 10 ms (HS/HF can use EV3, 2-EV3, 3-EV3)  */
+    0x0060,                         /* Inp Linear, Air CVSD, 2s Comp, 16bit     */
+    (BTM_SCO_PKT_TYPES_MASK_HV1 +   /* Packet Types                             */
+     BTM_SCO_PKT_TYPES_MASK_HV2 +
+     BTM_SCO_PKT_TYPES_MASK_HV3 +
+     BTM_SCO_PKT_TYPES_MASK_EV3 +
+     BTM_SCO_PKT_TYPES_MASK_EV4 +
+     BTM_SCO_PKT_TYPES_MASK_EV5),
+     BTM_ESCO_RETRANS_POWER        /* Retransmission Effort (Power)   */
+};
+
+/*******************************************************************************
+**
+** Function         btm_sco_flush_sco_data
+**
+** Description      This function is called to flush the SCO data for this channel.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_flush_sco_data(UINT16 sco_inx)
+{
+#if BTM_SCO_HCI_INCLUDED == TRUE
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p ;
+    BT_HDR      *p_buf;
+
+    if (sco_inx < BTM_MAX_SCO_LINKS)
+    {
+        p = &btm_cb.sco_cb.sco_db[sco_inx];
+        while (p->xmit_data_q.p_first)
+        {
+            if ((p_buf = (BT_HDR *)GKI_dequeue (&p->xmit_data_q)) != NULL)
+                GKI_freebuf (p_buf);
+        }
+    }
+#endif
+#endif
+}
+/*******************************************************************************
+**
+** Function         btm_sco_init
+**
+** Description      This function is called at BTM startup to initialize
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_init (void)
+{
+#if 0  /* cleared in btm_init; put back in if called from anywhere else! */
+    memset (&btm_cb.sco_cb, 0, sizeof(tSCO_CB));
+#endif
+    /* Initialize nonzero defaults */
+    btm_cb.sco_cb.sco_disc_reason  = BTM_INVALID_SCO_DISC_REASON;
+
+    btm_cb.sco_cb.def_esco_parms = btm_esco_defaults; /* Initialize with defaults */
+    btm_cb.sco_cb.desired_sco_mode = BTM_DEFAULT_SCO_MODE;
+}
+
+/*******************************************************************************
+**
+** Function         btm_esco_conn_rsp
+**
+** Description      This function is called upon receipt of an (e)SCO connection
+**                  request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject
+**                  the request. Parameters used to negotiate eSCO links.
+**                  If p_parms is NULL, then default values are used.
+**                  If the link type of the incoming request is SCO, then only
+**                  the tx_bw, max_latency, content format, and packet_types are
+**                  valid.  The hci_status parameter should be
+**                  ([0x0] to accept, [0x0d..0x0f] to reject)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_esco_conn_rsp (UINT16 sco_inx, UINT8 hci_status, BD_ADDR bda,
+                               tBTM_ESCO_PARAMS *p_parms)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN        *p_sco = NULL;
+    tBTM_ESCO_PARAMS *p_setup;
+    UINT16            temp_pkt_types;
+
+    if (sco_inx < BTM_MAX_SCO_LINKS)
+        p_sco = &btm_cb.sco_cb.sco_db[sco_inx];
+
+    /* Reject the connect request if refused by caller or wrong state */
+    if (hci_status != HCI_SUCCESS || p_sco == NULL)
+    {
+        if (p_sco)
+        {
+            p_sco->state = (p_sco->state == SCO_ST_W4_CONN_RSP) ? SCO_ST_LISTENING
+                                                                : SCO_ST_UNUSED;
+        }
+
+        if (!btm_cb.sco_cb.esco_supported)
+        {
+            if (!btsnd_hcic_reject_conn (bda, hci_status))
+            {
+                BTM_TRACE_ERROR0("Could not reject (e)SCO conn: No Buffer!!!");
+            }
+        }
+        else
+        {
+            if (!btsnd_hcic_reject_esco_conn (bda, hci_status))
+            {
+                BTM_TRACE_ERROR0("Could not reject (e)SCO conn: No Buffer!!!");
+            }
+        }
+    }
+    else    /* Connection is being accepted */
+    {
+        p_sco->state = SCO_ST_CONNECTING;
+        if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_1_2)
+        {
+            p_setup = &p_sco->esco.setup;
+            /* If parameters not specified use the default */
+            if (p_parms)
+                *p_setup = *p_parms;
+            else /* Use the last setup passed thru BTM_SetEscoMode (or defaults) */
+            {
+                *p_setup = btm_cb.sco_cb.def_esco_parms;
+            }
+
+            temp_pkt_types = (p_setup->packet_types &
+                              BTM_SCO_SUPPORTED_PKTS_MASK &
+                              btm_cb.btm_sco_pkt_types_supported);
+
+            /* Make sure at least one eSCO packet type is sent, else might confuse peer */
+            /* Taking this out to confirm with BQB tests
+            ** Real application would like to include this though, as many devices
+            ** do not retry with SCO only if an eSCO connection fails.
+            if (!(temp_pkt_types & BTM_ESCO_LINK_ONLY_MASK))
+            {
+                temp_pkt_types |= BTM_SCO_PKT_TYPES_MASK_EV3;
+            }
+            */
+            /* If SCO request, remove eSCO packet types (conformance) */
+            if (p_sco->esco.data.link_type == BTM_LINK_TYPE_SCO)
+            {
+                temp_pkt_types &= BTM_SCO_LINK_ONLY_MASK;
+
+                if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+                {
+                    temp_pkt_types |= BTM_SCO_EXCEPTION_PKTS_MASK;
+                }
+            }
+             /* OR in any exception packet types if at least 2.0 version of spec */
+            else if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+            {
+                temp_pkt_types |= ((p_setup->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) |
+                    (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK));
+            }
+
+            if (btsnd_hcic_accept_esco_conn (bda, p_setup->tx_bw, p_setup->rx_bw,
+                                         p_setup->max_latency, p_setup->voice_contfmt,
+                                             p_setup->retrans_effort, temp_pkt_types))
+            {
+                p_setup->packet_types = temp_pkt_types;
+            }
+            else
+            {
+                BTM_TRACE_ERROR0("Could not accept SCO conn: No Buffer!!!");
+            }
+        }
+        else    /* Controller is version 1.1 or earlier */
+        {
+            btsnd_hcic_accept_conn (bda, 0);
+        }
+    }
+#endif
+}
+
+
+#if BTM_SCO_HCI_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function         btm_sco_check_send_pkts
+**
+** Description      This function is called to check if it can send packets
+**                  to the Host Controller.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_check_send_pkts (UINT16 sco_inx)
+{
+    BT_HDR  *p_buf;
+    tSCO_CB  *p_cb = &btm_cb.sco_cb;
+    tSCO_CONN   *p_ccb = &p_cb->sco_db[sco_inx];
+
+    /* If there is data to send, send it now */
+    while (p_ccb->xmit_data_q.p_first != NULL)
+    {
+        p_buf = NULL;
+
+#if BTM_SCO_HCI_DEBUG
+        BTM_TRACE_DEBUG1 ("btm: [%d] buf in xmit_data_q", p_ccb->xmit_data_q.count );
+#endif
+        p_buf = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_data_q);
+
+        HCI_SCO_DATA_TO_LOWER (p_buf);
+    }
+}
+#endif /* BTM_SCO_HCI_INCLUDED == TRUE */
+
+/*******************************************************************************
+**
+** Function         btm_route_sco_data
+**
+** Description      Route received SCO data.
+**
+** Returns          void
+**
+*******************************************************************************/
+void  btm_route_sco_data(BT_HDR *p_msg)
+{
+#if BTM_SCO_HCI_INCLUDED == TRUE
+    UINT16      sco_inx, handle;
+    UINT8       *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
+    UINT8       pkt_size = 0;
+    UINT8       pkt_status = 0;
+
+    /* Extract Packet_Status_Flag and handle */
+    STREAM_TO_UINT16 (handle, p);
+    pkt_status = HCID_GET_EVENT(handle);
+    handle   = HCID_GET_HANDLE (handle);
+
+    STREAM_TO_UINT8 (pkt_size, p);
+
+    if ((sco_inx = btm_find_scb_by_handle(handle)) != BTM_MAX_SCO_LINKS )
+    {
+        /* send data callback */
+        if (!btm_cb.sco_cb.p_data_cb )
+            /* if no data callback registered,  just free the buffer  */
+            GKI_freebuf (p_msg);
+        else
+        {
+            (*btm_cb.sco_cb.p_data_cb)(sco_inx, p_msg, (tBTM_SCO_DATA_FLAG) pkt_status);
+        }
+    }
+    else /* no mapping handle SCO connection is active, free the buffer */
+    {
+        GKI_freebuf (p_msg);
+    }
+#else
+    GKI_freebuf(p_msg);
+#endif
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_WriteScoData
+**
+** Description      This function write SCO data to a specified instance. The data
+**                  to be written p_buf needs to carry an offset of
+**                  HCI_SCO_PREAMBLE_SIZE bytes, and the data length can not
+**                  exceed BTM_SCO_DATA_SIZE_MAX bytes, whose default value is set
+**                  to 60 and is configurable. Data longer than the maximum bytes
+**                  will be truncated.
+**
+** Returns          BTM_SUCCESS: data write is successful
+**                  BTM_ILLEGAL_VALUE: SCO data contains illegal offset value.
+**                  BTM_SCO_BAD_LENGTH: SCO data length exceeds the max SCO packet
+**                                      size.
+**                  BTM_NO_RESOURCES: no resources.
+**                  BTM_UNKNOWN_ADDR: unknown SCO connection handle, or SCO is not
+**                                    routed via HCI.
+**
+**
+*******************************************************************************/
+tBTM_STATUS BTM_WriteScoData (UINT16 sco_inx, BT_HDR *p_buf)
+{
+#if (BTM_SCO_HCI_INCLUDED == TRUE) && (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p_ccb = &btm_cb.sco_cb.sco_db[sco_inx];
+    UINT8   *p;
+    tBTM_STATUS     status = BTM_SUCCESS;
+
+    if (sco_inx < BTM_MAX_SCO_LINKS && btm_cb.sco_cb.p_data_cb &&
+        p_ccb->state == SCO_ST_CONNECTED)
+    {
+        /* Ensure we have enough space in the buffer for the SCO and HCI headers */
+        if (p_buf->offset < HCI_SCO_PREAMBLE_SIZE)
+        {
+            BTM_TRACE_ERROR1 ("BTM SCO - cannot send buffer, offset: %d", p_buf->offset);
+            GKI_freebuf (p_buf);
+            status = BTM_ILLEGAL_VALUE;
+        }
+        else    /* write HCI header */
+        {
+            /* Step back 3 bytes to add the headers */
+            p_buf->offset -= HCI_SCO_PREAMBLE_SIZE;
+            /* Set the pointer to the beginning of the data */
+            p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+            /* add HCI handle */
+            UINT16_TO_STREAM (p, p_ccb->hci_handle);
+            /* only sent the first BTM_SCO_DATA_SIZE_MAX bytes data if more than max,
+               and set warning status */
+            if (p_buf->len > BTM_SCO_DATA_SIZE_MAX)
+            {
+                p_buf->len = BTM_SCO_DATA_SIZE_MAX;
+                status = BTM_SCO_BAD_LENGTH;
+            }
+
+            UINT8_TO_STREAM (p, (UINT8)p_buf->len);
+            p_buf->len += HCI_SCO_PREAMBLE_SIZE;
+
+            GKI_enqueue (&p_ccb->xmit_data_q, p_buf);
+
+            btm_sco_check_send_pkts (sco_inx);
+        }
+    }
+    else
+    {
+        GKI_freebuf(p_buf);
+
+        BTM_TRACE_WARNING2 ("BTM_WriteScoData, invalid sco index: %d at state [%d]",
+            sco_inx, btm_cb.sco_cb.sco_db[sco_inx].state);
+        status = BTM_UNKNOWN_ADDR;
+    }
+
+    return (status);
+
+#else
+    return (BTM_NO_RESOURCES);
+#endif
+}
+
+#if (BTM_MAX_SCO_LINKS>0)
+/*******************************************************************************
+**
+** Function         btm_send_connect_request
+**
+** Description      This function is called to respond to SCO connect indications
+**
+** Returns          void
+**
+*******************************************************************************/
+static tBTM_STATUS btm_send_connect_request(UINT16 acl_handle,
+                                            tBTM_ESCO_PARAMS *p_setup)
+{
+    UINT16 temp_pkt_types;
+    UINT8 xx;
+    tACL_CONN *p_acl;
+
+    /* Send connect request depending on version of spec */
+    if (!btm_cb.sco_cb.esco_supported)
+    {
+        if (!btsnd_hcic_add_SCO_conn (acl_handle, BTM_ESCO_2_SCO(p_setup->packet_types)))
+            return (BTM_NO_RESOURCES);
+    }
+    else
+    {
+        temp_pkt_types = (p_setup->packet_types & BTM_SCO_SUPPORTED_PKTS_MASK &
+                             btm_cb.btm_sco_pkt_types_supported);
+
+        /* OR in any exception packet types if at least 2.0 version of spec */
+        if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+        {
+            temp_pkt_types |= ((p_setup->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) |
+                (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK));
+        }
+
+        /* Finally, remove EDR eSCO if the remote device doesn't support it */
+        /* UPF25:  Only SCO was brought up in this case */
+        btm_handle_to_acl_index(acl_handle);
+        if ((xx = btm_handle_to_acl_index(acl_handle)) < MAX_L2CAP_LINKS)
+        {
+            p_acl = &btm_cb.acl_db[xx];
+            if (!HCI_EDR_ESCO_2MPS_SUPPORTED(p_acl->features))
+            {
+
+                BTM_TRACE_WARNING0("BTM Remote does not support 2-EDR eSCO");
+                temp_pkt_types |= (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 |
+                                   HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5);
+            }
+            if (!HCI_EDR_ESCO_3MPS_SUPPORTED(p_acl->features))
+            {
+
+                BTM_TRACE_WARNING0("BTM Remote does not support 3-EDR eSCO");
+                temp_pkt_types |= (HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 |
+                                   HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5);
+            }
+        }
+
+
+        BTM_TRACE_API6("      txbw 0x%x, rxbw 0x%x, lat 0x%x, voice 0x%x, retrans 0x%02x, pkt 0x%04x",
+            p_setup->tx_bw, p_setup->rx_bw,
+            p_setup->max_latency, p_setup->voice_contfmt,
+            p_setup->retrans_effort, temp_pkt_types);
+
+        if (!btsnd_hcic_setup_esco_conn(acl_handle,
+                                        p_setup->tx_bw,
+                                        p_setup->rx_bw,
+                                        p_setup->max_latency,
+                                        p_setup->voice_contfmt,
+                                        p_setup->retrans_effort,
+                                        temp_pkt_types))
+            return (BTM_NO_RESOURCES);
+        else
+            p_setup->packet_types = temp_pkt_types;
+    }
+
+    return (BTM_CMD_STARTED);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         btm_set_sco_ind_cback
+**
+** Description      This function is called to register for TCS SCO connect
+**                  indications.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb )
+{
+    btm_cb.sco_cb.app_sco_ind_cb = sco_ind_cb;
+}
+
+/*******************************************************************************
+**
+** Function         btm_accept_sco_link
+**
+** Description      This function is called to respond to TCS SCO connect
+**                  indications
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup,
+                         tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN        *p_sco;
+
+    if (sco_inx >= BTM_MAX_SCO_LINKS)
+    {
+        BTM_TRACE_ERROR1("btm_accept_sco_link: Invalid sco_inx(%d)", sco_inx);
+        return;
+    }
+
+    /* Link role is ignored in for this message */
+    p_sco = &btm_cb.sco_cb.sco_db[sco_inx];
+    p_sco->p_conn_cb = p_conn_cb;
+    p_sco->p_disc_cb = p_disc_cb;
+    p_sco->esco.data.link_type = BTM_LINK_TYPE_ESCO; /* Accept with all supported types */
+
+    BTM_TRACE_DEBUG1("TCS accept SCO: Packet Types 0x%04x", p_setup->packet_types);
+
+    btm_esco_conn_rsp(sco_inx, HCI_SUCCESS, p_sco->esco.data.bd_addr, p_setup);
+#else
+    btm_reject_sco_link(sco_inx);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_reject_sco_link
+**
+** Description      This function is called to respond to SCO connect indications
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_reject_sco_link( UINT16 sco_inx )
+{
+    btm_esco_conn_rsp(sco_inx, HCI_ERR_HOST_REJECT_RESOURCES,
+                      btm_cb.sco_cb.sco_db[sco_inx].esco.data.bd_addr, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_CreateSco
+**
+** Description      This function is called to create an SCO connection. If the
+**                  "is_orig" flag is TRUE, the connection will be originated,
+**                  otherwise BTM will wait for the other side to connect.
+**
+**                  NOTE:  If BTM_IGNORE_SCO_PKT_TYPE is passed in the pkt_types
+**                      parameter the default packet types is used.
+**
+** Returns          BTM_UNKNOWN_ADDR if the ACL connection is not up
+**                  BTM_BUSY         if another SCO being set up to
+**                                   the same BD address
+**                  BTM_NO_RESOURCES if the max SCO limit has been reached
+**                  BTM_CMD_STARTED  if the connection establishment is started.
+**                                   In this case, "*p_sco_inx" is filled in
+**                                   with the sco index used for the connection.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig, UINT16 pkt_types,
+                           UINT16 *p_sco_inx, tBTM_SCO_CB *p_conn_cb,
+                           tBTM_SCO_CB *p_disc_cb)
+{
+#if (BTM_MAX_SCO_LINKS > 0)
+    tBTM_ESCO_PARAMS *p_setup;
+    tSCO_CONN        *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16            xx;
+    UINT16            acl_handle = 0;
+    UINT16            temp_pkt_types;
+    tACL_CONN        *p_acl;
+
+#if (BTM_PWR_MGR_INCLUDED == TRUE) && (BTM_SCO_WAKE_PARKED_LINK == TRUE)
+    tBTM_PM_MODE      md;
+    tBTM_PM_PWR_MD    pm;
+#else
+    UINT8             mode;
+#endif
+
+    *p_sco_inx = BTM_INVALID_SCO_INDEX;
+
+    /* If originating, ensure that there is an ACL connection to the BD Address */
+    if (is_orig)
+    {
+        if ((!remote_bda) || ((acl_handle = BTM_GetHCIConnHandle (remote_bda)) == 0xFFFF))
+            return (BTM_UNKNOWN_ADDR);
+    }
+
+    if (remote_bda)
+    {
+        /* If any SCO is being established to the remote BD address, refuse this */
+        for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+        {
+            if (((p->state == SCO_ST_CONNECTING) || (p->state == SCO_ST_LISTENING)
+                || (p->state == SCO_ST_PEND_UNPARK))
+                && (!memcmp (p->esco.data.bd_addr, remote_bda, BD_ADDR_LEN)))
+            {
+                return (BTM_BUSY);
+            }
+        }
+    }
+    else
+    {
+        /* Support only 1 wildcard BD address at a time */
+        for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+        {
+            if ((p->state == SCO_ST_LISTENING) && (!p->rem_bd_known))
+                return (BTM_BUSY);
+        }
+    }
+
+    /* Now, try to find an unused control block, and kick off the SCO establishment */
+    for (xx = 0, p = &btm_cb.sco_cb.sco_db[0]; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (p->state == SCO_ST_UNUSED)
+        {
+            if (remote_bda)
+            {
+                if (is_orig)
+                {
+                    /* can not create SCO link if in park mode */
+#if (BTM_PWR_MGR_INCLUDED == TRUE) && (BTM_SCO_WAKE_PARKED_LINK == TRUE)
+                    if(BTM_ReadPowerMode(remote_bda, &md) == BTM_SUCCESS)
+                    {
+                        if (md == BTM_PM_MD_PARK || md == BTM_PM_MD_SNIFF)
+                        {
+/* Coverity: FALSE-POSITIVE error from Coverity tool. Please do NOT remove following comment. */
+/* coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode
+                                the other data members of tBTM_PM_PWR_MD are ignored
+*/
+                            pm.mode = BTM_PM_MD_ACTIVE;
+                            BTM_SetPowerMode(BTM_PM_SET_ONLY_ID, remote_bda, &pm);
+                            p->state = SCO_ST_PEND_UNPARK;
+                        }
+                    }
+#elif BTM_PWR_MGR_INCLUDED == TRUE
+                    if( (BTM_ReadPowerMode(remote_bda, &mode) == BTM_SUCCESS) && (mode == BTM_PM_MD_PARK) )
+                        return (BTM_WRONG_MODE);
+#else
+                    if( (BTM_ReadAclMode(remote_bda, &mode) == BTM_SUCCESS) && (mode == BTM_ACL_MODE_PARK) )
+                        return (BTM_WRONG_MODE);
+#endif
+                }
+                memcpy (p->esco.data.bd_addr, remote_bda, BD_ADDR_LEN);
+                p->rem_bd_known = TRUE;
+            }
+            else
+                p->rem_bd_known = FALSE;
+
+            /* Link role is ignored in for this message */
+            if (pkt_types == BTM_IGNORE_SCO_PKT_TYPE)
+                pkt_types = btm_cb.sco_cb.def_esco_parms.packet_types;
+
+            p_setup = &p->esco.setup;
+            *p_setup = btm_cb.sco_cb.def_esco_parms;
+            p_setup->packet_types = (btm_cb.sco_cb.desired_sco_mode == BTM_LINK_TYPE_SCO)
+                ? (pkt_types & BTM_SCO_LINK_ONLY_MASK) : pkt_types;
+
+            temp_pkt_types = (p_setup->packet_types & BTM_SCO_SUPPORTED_PKTS_MASK &
+                             btm_cb.btm_sco_pkt_types_supported);
+
+            /* OR in any exception packet types if at least 2.0 version of spec */
+            if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+            {
+                if (btm_cb.sco_cb.desired_sco_mode == HCI_LINK_TYPE_ESCO)
+                {
+                    temp_pkt_types |= ((p_setup->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) |
+                        (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK));
+                }
+                else    /* Only using SCO packet types; turn off EDR also */
+                {
+                    temp_pkt_types |= BTM_SCO_EXCEPTION_PKTS_MASK;
+                }
+            }
+
+            p_setup->packet_types = temp_pkt_types;
+            p->p_conn_cb  = p_conn_cb;
+            p->p_disc_cb  = p_disc_cb;
+            p->hci_handle = BTM_INVALID_HCI_HANDLE;
+            p->is_orig = is_orig;
+
+            if( p->state != SCO_ST_PEND_UNPARK )
+            {
+                if (is_orig)
+                {
+                    /* If role change is in progress, do not proceed with SCO setup
+                     * Wait till role change is complete */
+                    p_acl = btm_bda_to_acl(remote_bda);
+                    if (p_acl && p_acl->switch_role_state != BTM_ACL_SWKEY_STATE_IDLE)
+                    {
+                        BTM_TRACE_API1("Role Change is in progress for ACL handle 0x%04x",acl_handle);
+                        p->state = SCO_ST_PEND_ROLECHANGE;
+
+                    }
+                }
+            }
+
+            if( p->state != SCO_ST_PEND_UNPARK && p->state != SCO_ST_PEND_ROLECHANGE )
+            {
+                if (is_orig)
+                {
+                    BTM_TRACE_API2("BTM_CreateSco -> (e)SCO Link for ACL handle 0x%04x, Desired Type %d",
+                                    acl_handle, btm_cb.sco_cb.desired_sco_mode);
+
+                    if ((btm_send_connect_request(acl_handle, p_setup)) != BTM_CMD_STARTED)
+                        return (BTM_NO_RESOURCES);
+
+                    p->state = SCO_ST_CONNECTING;
+                }
+                else
+                    p->state = SCO_ST_LISTENING;
+            }
+
+            *p_sco_inx = xx;
+
+            return (BTM_CMD_STARTED);
+        }
+    }
+
+#endif
+    /* If here, all SCO blocks in use */
+    return (BTM_NO_RESOURCES);
+}
+
+#if (BTM_PWR_MGR_INCLUDED == TRUE) && (BTM_SCO_WAKE_PARKED_LINK == TRUE)
+/*******************************************************************************
+**
+** Function         btm_sco_chk_pend_unpark
+**
+** Description      This function is called by BTIF when there is a mode change
+**                  event to see if there are SCO commands waiting for the unpark.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    UINT16      xx;
+    UINT16      acl_handle;
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if ((p->state == SCO_ST_PEND_UNPARK) &&
+            ((acl_handle = BTM_GetHCIConnHandle (p->esco.data.bd_addr)) == hci_handle))
+
+        {
+            BTM_TRACE_API3("btm_sco_chk_pend_unpark -> (e)SCO Link for ACL handle 0x%04x, Desired Type %d, hci_status 0x%02x",
+                                    acl_handle, btm_cb.sco_cb.desired_sco_mode, hci_status);
+
+            if ((btm_send_connect_request(acl_handle, &p->esco.setup)) == BTM_CMD_STARTED)
+                p->state = SCO_ST_CONNECTING;
+        }
+    }
+#endif
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         btm_sco_chk_pend_rolechange
+**
+** Description      This function is called by BTIF when there is a role change
+**                  event to see if there are SCO commands waiting for the role change.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_chk_pend_rolechange (UINT16 hci_handle)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    UINT16      xx;
+    UINT16      acl_handle;
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if ((p->state == SCO_ST_PEND_ROLECHANGE) &&
+            ((acl_handle = BTM_GetHCIConnHandle (p->esco.data.bd_addr)) == hci_handle))
+
+        {
+            BTM_TRACE_API1("btm_sco_chk_pend_rolechange -> (e)SCO Link for ACL handle 0x%04x", acl_handle);
+
+            if ((btm_send_connect_request(acl_handle, &p->esco.setup)) == BTM_CMD_STARTED)
+                p->state = SCO_ST_CONNECTING;
+        }
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_sco_conn_req
+**
+** Description      This function is called by BTIF when an SCO connection
+**                  request is received from a remote.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_conn_req (BD_ADDR bda,  DEV_CLASS dev_class, UINT8 link_type)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CB     *p_sco = &btm_cb.sco_cb;
+    tSCO_CONN   *p = &p_sco->sco_db[0];
+    UINT16      xx;
+    tBTM_ESCO_CONN_REQ_EVT_DATA evt_data;
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        /*
+         * If the sco state is in the SCO_ST_CONNECTING state, we still need
+         * to return accept sco to avoid race conditon for sco creation
+         */
+        if (((p->state == SCO_ST_LISTENING && p->rem_bd_known) || p->state == SCO_ST_CONNECTING)
+         && (!memcmp (p->esco.data.bd_addr, bda, BD_ADDR_LEN)))
+        {
+            /* If this guy was a wildcard, he is not one any more */
+            p->rem_bd_known = TRUE;
+            p->esco.data.link_type = link_type;
+            p->state = SCO_ST_W4_CONN_RSP;
+            memcpy (p->esco.data.bd_addr, bda, BD_ADDR_LEN);
+
+            /* If no callback, auto-accept the connection if packet types match */
+            if (!p->esco.p_esco_cback)
+            {
+                /* If requesting eSCO reject if default parameters are SCO only */
+                if ((link_type == BTM_LINK_TYPE_ESCO
+                    && !(p_sco->def_esco_parms.packet_types & BTM_ESCO_LINK_ONLY_MASK)
+                    && ((p_sco->def_esco_parms.packet_types & BTM_SCO_EXCEPTION_PKTS_MASK)
+                       == BTM_SCO_EXCEPTION_PKTS_MASK))
+
+                    /* Reject request if SCO is desired but no SCO packets delected */
+                    || (link_type == BTM_LINK_TYPE_SCO
+                    && !(p_sco->def_esco_parms.packet_types & BTM_SCO_LINK_ONLY_MASK)))
+                {
+                    btm_esco_conn_rsp(xx, HCI_ERR_HOST_REJECT_RESOURCES, bda, NULL);
+                }
+                else    /* Accept the request */
+                {
+                    btm_esco_conn_rsp(xx, HCI_SUCCESS, bda, NULL);
+                }
+            }
+            else    /* Notify upper layer of connect indication */
+            {
+                memcpy(evt_data.bd_addr, bda, BD_ADDR_LEN);
+                memcpy(evt_data.dev_class, dev_class, DEV_CLASS_LEN);
+                evt_data.link_type = link_type;
+                evt_data.sco_inx = xx;
+                p->esco.p_esco_cback(BTM_ESCO_CONN_REQ_EVT, (tBTM_ESCO_EVT_DATA *)&evt_data);
+            }
+
+            return;
+        }
+    }
+
+    /* TCS usage */
+    if (btm_cb.sco_cb.app_sco_ind_cb)
+    {
+        /* Now, try to find an unused control block */
+        for (xx = 0, p = &btm_cb.sco_cb.sco_db[0]; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+        {
+            if (p->state == SCO_ST_UNUSED)
+            {
+                p->is_orig = FALSE;
+                p->state = SCO_ST_LISTENING;
+
+                p->esco.data.link_type = link_type;
+                memcpy (p->esco.data.bd_addr, bda, BD_ADDR_LEN);
+                p->rem_bd_known = TRUE;
+                break;
+            }
+        }
+        if( xx < BTM_MAX_SCO_LINKS)
+        {
+            btm_cb.sco_cb.app_sco_ind_cb(xx);
+            return;
+        }
+    }
+
+#endif
+    /* If here, no one wants the SCO connection. Reject it */
+    BTM_TRACE_WARNING0("btm_sco_conn_req: No one wants this SCO connection; rejecting it");
+    btm_esco_conn_rsp(BTM_MAX_SCO_LINKS, HCI_ERR_HOST_REJECT_RESOURCES, bda, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sco_connected
+**
+** Description      This function is called by BTIF when an (e)SCO connection
+**                  is connected.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle,
+                        tBTM_ESCO_DATA *p_esco_data)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16      xx;
+    BOOLEAN     spt = FALSE;
+    tBTM_CHG_ESCO_PARAMS parms;
+#endif
+
+    btm_cb.sco_cb.sco_disc_reason = hci_status;
+
+#if (BTM_MAX_SCO_LINKS>0)
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (((p->state == SCO_ST_CONNECTING) ||
+             (p->state == SCO_ST_LISTENING)  ||
+             (p->state == SCO_ST_W4_CONN_RSP))
+         && (p->rem_bd_known)
+         && (!bda || !memcmp (p->esco.data.bd_addr, bda, BD_ADDR_LEN)))
+        {
+            if (hci_status != HCI_SUCCESS)
+            {
+                /* Report the error if originator, otherwise remain in Listen mode */
+                if (p->is_orig)
+                {
+                    /* If role switch is pending, we need try again after role switch is complete */
+                    if(hci_status == HCI_ERR_ROLE_SWITCH_PENDING)
+                    {
+                        BTM_TRACE_API1("Role Change pending for HCI handle 0x%04x",hci_handle);
+                        p->state = SCO_ST_PEND_ROLECHANGE;
+                    }
+                    /* avoid calling disconnect callback because of sco creation race */
+                    else if (hci_status != HCI_ERR_LMP_ERR_TRANS_COLLISION)
+                    {
+                        p->state = SCO_ST_UNUSED;
+                        (*p->p_disc_cb)(xx);
+                    }
+                }
+                else
+                {
+                    /* Notify the upper layer that incoming sco connection has failed. */
+                    if (p->state == SCO_ST_CONNECTING)
+                    {
+                        p->state = SCO_ST_UNUSED;
+                        (*p->p_disc_cb)(xx);
+                    }
+                    else
+                        p->state = SCO_ST_LISTENING;
+                }
+
+                return;
+            }
+
+            if (p->state == SCO_ST_LISTENING)
+                spt = TRUE;
+
+            p->state = SCO_ST_CONNECTED;
+            p->hci_handle = hci_handle;
+
+            if (!btm_cb.sco_cb.esco_supported)
+            {
+                p->esco.data.link_type = BTM_LINK_TYPE_SCO;
+                if (spt)
+                {
+                    parms.packet_types = p->esco.setup.packet_types;
+                    /* Keep the other parameters the same for SCO */
+                    parms.max_latency = p->esco.setup.max_latency;
+                    parms.retrans_effort = p->esco.setup.retrans_effort;
+
+                    BTM_ChangeEScoLinkParms(xx, &parms);
+                }
+            }
+            else
+            {
+                if (p_esco_data)
+                    p->esco.data = *p_esco_data;
+            }
+
+            (*p->p_conn_cb)(xx);
+
+            return;
+        }
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_find_scb_by_handle
+**
+** Description      Look through all active SCO connection for a match based on the
+**                  HCI handle.
+**
+** Returns          index to matched SCO connection CB, or BTM_MAX_SCO_LINKS if
+**                  no match.
+**
+*******************************************************************************/
+UINT16  btm_find_scb_by_handle (UINT16 handle)
+{
+    int         xx;
+    tSCO_CONN    *p = &btm_cb.sco_cb.sco_db[0];
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if ((p->state == SCO_ST_CONNECTED) && (p->hci_handle == handle))
+        {
+            return (xx);
+        }
+    }
+
+    /* If here, no match found */
+    return (xx);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RemoveSco
+**
+** Description      This function is called to remove a specific SCO connection.
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[sco_inx];
+    UINT16       tempstate;
+
+    /* Validity check */
+    if ((sco_inx >= BTM_MAX_SCO_LINKS) || (p->state == SCO_ST_UNUSED))
+        return (BTM_UNKNOWN_ADDR);
+
+    /* If no HCI handle, simply drop the connection and return */
+    if (p->hci_handle == BTM_INVALID_HCI_HANDLE || p->state == SCO_ST_PEND_UNPARK)
+    {
+        p->hci_handle = BTM_INVALID_HCI_HANDLE;
+        p->state = SCO_ST_UNUSED;
+        p->esco.p_esco_cback = NULL;    /* Deregister the eSCO event callback */
+        return (BTM_SUCCESS);
+    }
+
+    tempstate = p->state;
+    p->state = SCO_ST_DISCONNECTING;
+
+    if (!btsnd_hcic_disconnect (p->hci_handle, HCI_ERR_PEER_USER))
+    {
+        p->state = tempstate;
+        return (BTM_NO_RESOURCES);
+    }
+
+    return (BTM_CMD_STARTED);
+#else
+    return (BTM_NO_RESOURCES);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_remove_sco_links
+**
+** Description      This function is called to remove all sco links for an ACL link.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_remove_sco_links (BD_ADDR bda)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16       xx;
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (p->rem_bd_known && (!memcmp (p->esco.data.bd_addr, bda, BD_ADDR_LEN)))
+        {
+            BTM_RemoveSco(xx);
+        }
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_sco_removed
+**
+** Description      This function is called by BTIF when an SCO connection
+**                  is removed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_removed (UINT16 hci_handle, UINT8 reason)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16      xx;
+#endif
+
+    btm_cb.sco_cb.sco_disc_reason = reason;
+
+#if (BTM_MAX_SCO_LINKS>0)
+    p = &btm_cb.sco_cb.sco_db[0];
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if ((p->state != SCO_ST_UNUSED) && (p->state != SCO_ST_LISTENING) && (p->hci_handle == hci_handle))
+        {
+            btm_sco_flush_sco_data(xx);
+
+            p->state = SCO_ST_UNUSED;
+            p->hci_handle = BTM_INVALID_HCI_HANDLE;
+            p->rem_bd_known = FALSE;
+            p->esco.p_esco_cback = NULL;    /* Deregister eSCO callback */
+            (*p->p_disc_cb)(xx);
+
+            return;
+        }
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sco_acl_removed
+**
+** Description      This function is called when an ACL connection is
+**                  removed. If the BD address is NULL, it is assumed that
+**                  the local device is down, and all SCO links are removed.
+**                  If a specific BD address is passed, only SCO connections
+**                  to that BD address are removed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sco_acl_removed (BD_ADDR bda)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16      xx;
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (p->state != SCO_ST_UNUSED)
+        {
+            if ((!bda) || (!memcmp (p->esco.data.bd_addr, bda, BD_ADDR_LEN) && p->rem_bd_known))
+            {
+                btm_sco_flush_sco_data(xx);
+
+                p->state = SCO_ST_UNUSED;
+                p->esco.p_esco_cback = NULL;    /* Deregister eSCO callback */
+                (*p->p_disc_cb)(xx);
+            }
+        }
+    }
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetScoPacketTypes
+**
+** Description      This function is called to set the packet types used for
+**                  a specific SCO connection,
+**
+** Parameters       pkt_types - One or more of the following
+**                  BTM_SCO_PKT_TYPES_MASK_HV1
+**                  BTM_SCO_PKT_TYPES_MASK_HV2
+**                  BTM_SCO_PKT_TYPES_MASK_HV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV4
+**                  BTM_SCO_PKT_TYPES_MASK_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV5
+**
+**                  BTM_SCO_LINK_ALL_MASK   - enables all supported types
+**
+** Returns          status of the operation
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tBTM_CHG_ESCO_PARAMS parms;
+    tSCO_CONN           *p;
+
+    /* Validity check */
+    if (sco_inx >= BTM_MAX_SCO_LINKS)
+        return (BTM_UNKNOWN_ADDR);
+
+    p = &btm_cb.sco_cb.sco_db[sco_inx];
+    parms.packet_types = pkt_types;
+
+    /* Keep the other parameters the same for SCO */
+    parms.max_latency = p->esco.setup.max_latency;
+    parms.retrans_effort = p->esco.setup.retrans_effort;
+
+    return (BTM_ChangeEScoLinkParms(sco_inx, &parms));
+#else
+    return (BTM_UNKNOWN_ADDR);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoPacketTypes
+**
+** Description      This function is read the packet types used for a specific
+**                  SCO connection.
+**
+** Returns          Packet types supported for the connection
+**                  One or more of the following (bitmask):
+**                  BTM_SCO_PKT_TYPES_MASK_HV1
+**                  BTM_SCO_PKT_TYPES_MASK_HV2
+**                  BTM_SCO_PKT_TYPES_MASK_HV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV4
+**                  BTM_SCO_PKT_TYPES_MASK_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV5
+**
+*******************************************************************************/
+UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN *p = &btm_cb.sco_cb.sco_db[sco_inx];
+
+    /* Validity check */
+    if ((sco_inx < BTM_MAX_SCO_LINKS) && (p->state == SCO_ST_CONNECTED))
+        return (p->esco.setup.packet_types);
+    else
+        return (0);
+#else
+    return (0);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoDiscReason
+**
+** Description      This function is returns the reason why an (e)SCO connection
+**                  has been removed. It contains the value until read, or until
+**                  another (e)SCO connection has disconnected.
+**
+** Returns          HCI reason or BTM_INVALID_SCO_DISC_REASON if not set.
+**
+*******************************************************************************/
+UINT16 BTM_ReadScoDiscReason (void)
+{
+    UINT16 res = btm_cb.sco_cb.sco_disc_reason;
+    btm_cb.sco_cb.sco_disc_reason = BTM_INVALID_SCO_DISC_REASON;
+    return (res);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDeviceScoPacketTypes
+**
+** Description      This function is read the SCO packet types that
+**                  the device supports.
+**
+** Returns          Packet types supported by the device.
+**                  One or more of the following (bitmask):
+**                  BTM_SCO_PKT_TYPES_MASK_HV1
+**                  BTM_SCO_PKT_TYPES_MASK_HV2
+**                  BTM_SCO_PKT_TYPES_MASK_HV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV4
+**                  BTM_SCO_PKT_TYPES_MASK_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_NO_2_EV5
+**                  BTM_SCO_PKT_TYPES_MASK_NO_3_EV5
+**
+*******************************************************************************/
+UINT16 BTM_ReadDeviceScoPacketTypes (void)
+{
+    return (btm_cb.btm_sco_pkt_types_supported);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoHandle
+**
+** Description      This function is used to read the HCI handle used for a specific
+**                  SCO connection,
+**
+** Returns          handle for the connection, or 0xFFFF if invalid SCO index.
+**
+*******************************************************************************/
+UINT16 BTM_ReadScoHandle (UINT16 sco_inx)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[sco_inx];
+
+    /* Validity check */
+    if ((sco_inx < BTM_MAX_SCO_LINKS) && (p->state == SCO_ST_CONNECTED))
+        return (p->hci_handle);
+    else
+        return (BTM_INVALID_HCI_HANDLE);
+#else
+    return (BTM_INVALID_HCI_HANDLE);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoBdAddr
+**
+** Description      This function is read the remote BD Address for a specific
+**                  SCO connection,
+**
+** Returns          pointer to BD address or NULL if not known
+**
+*******************************************************************************/
+UINT8 *BTM_ReadScoBdAddr (UINT16 sco_inx)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN   *p = &btm_cb.sco_cb.sco_db[sco_inx];
+
+    /* Validity check */
+    if ((sco_inx < BTM_MAX_SCO_LINKS) && (p->rem_bd_known))
+        return (p->esco.data.bd_addr);
+    else
+        return (NULL);
+#else
+    return (NULL);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetEScoMode
+**
+** Description      This function sets up the negotiated parameters for SCO or
+**                  eSCO, and sets as the default mode used for outgoing calls to
+**                  BTM_CreateSco.  It does not change any currently active (e)SCO links.
+**                  Note:  Incoming (e)SCO connections will always use packet types
+**                      supported by the controller.  If eSCO is not desired the
+**                      feature should be disabled in the controller's feature mask.
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_BUSY if there are one or more active (e)SCO links.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetEScoMode (tBTM_SCO_TYPE sco_mode, tBTM_ESCO_PARAMS *p_parms)
+{
+    tSCO_CB          *p_esco = &btm_cb.sco_cb;
+    tBTM_ESCO_PARAMS *p_def = &p_esco->def_esco_parms;
+
+    if (p_esco->esco_supported)
+    {
+        if (p_parms)
+        {
+            if (sco_mode == BTM_LINK_TYPE_ESCO)
+                *p_def = *p_parms;  /* Save as the default parameters */
+            else    /* Load only the SCO packet types */
+            {
+                p_def->packet_types = p_parms->packet_types;
+                p_def->tx_bw            = BTM_64KBITS_RATE;
+                p_def->rx_bw            = BTM_64KBITS_RATE;
+                p_def->max_latency      = 0x000a;
+                p_def->voice_contfmt    = 0x0060;
+                p_def->retrans_effort   = 0;
+
+                /* OR in any exception packet types if at least 2.0 version of spec */
+                if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+                {
+                    p_def->packet_types |= BTM_SCO_EXCEPTION_PKTS_MASK;
+                }
+            }
+        }
+        p_esco->desired_sco_mode = sco_mode;
+        BTM_TRACE_API1("BTM_SetEScoMode -> mode %d",  sco_mode);
+    }
+    else
+    {
+        p_esco->desired_sco_mode = BTM_LINK_TYPE_SCO;
+        p_def->packet_types &= BTM_SCO_LINK_ONLY_MASK;
+        p_def->retrans_effort = 0;
+        BTM_TRACE_API0("BTM_SetEScoMode -> mode SCO (eSCO not supported)");
+    }
+
+    BTM_TRACE_DEBUG6("    txbw 0x%08x, rxbw 0x%08x, max_lat 0x%04x, voice 0x%04x, pkt 0x%04x, rtx effort 0x%02x",
+                     p_def->tx_bw, p_def->rx_bw, p_def->max_latency,
+                     p_def->voice_contfmt, p_def->packet_types,
+                     p_def->retrans_effort);
+
+    return (BTM_SUCCESS);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_RegForEScoEvts
+**
+** Description      This function registers a SCO event callback with the
+**                  specified instance.  It should be used to received
+**                  connection indication events and change of link parameter
+**                  events.
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_ILLEGAL_VALUE if there is an illegal sco_inx
+**                  BTM_MODE_UNSUPPORTED if controller version is not BT1.2 or
+**                          later or does not support eSCO.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx, tBTM_ESCO_CBACK *p_esco_cback)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    if (!btm_cb.sco_cb.esco_supported)
+    {
+        btm_cb.sco_cb.sco_db[sco_inx].esco.p_esco_cback = NULL;
+        return (BTM_MODE_UNSUPPORTED);
+    }
+
+    if (sco_inx < BTM_MAX_SCO_LINKS &&
+        btm_cb.sco_cb.sco_db[sco_inx].state != SCO_ST_UNUSED)
+    {
+        btm_cb.sco_cb.sco_db[sco_inx].esco.p_esco_cback = p_esco_cback;
+        return (BTM_SUCCESS);
+    }
+    return (BTM_ILLEGAL_VALUE);
+#else
+    return (BTM_MODE_UNSUPPORTED);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadEScoLinkParms
+**
+** Description      This function returns the current eSCO link parameters for
+**                  the specified handle.  This can be called anytime a connection
+**                  is active, but is typically called after receiving the SCO
+**                  opened callback.
+**
+**                  Note: If called over a 1.1 controller, only the packet types
+**                        field has meaning.
+**
+** Returns          BTM_SUCCESS if returned data is valid connection.
+**                  BTM_WRONG_MODE if no connection with a peer device or bad sco_inx.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx, tBTM_ESCO_DATA *p_parms)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    BTM_TRACE_API1("BTM_ReadEScoLinkParms -> sco_inx 0x%04x", sco_inx);
+
+    if (sco_inx < BTM_MAX_SCO_LINKS &&
+        btm_cb.sco_cb.sco_db[sco_inx].state >= SCO_ST_CONNECTED)
+    {
+        *p_parms = btm_cb.sco_cb.sco_db[sco_inx].esco.data;
+        return (BTM_SUCCESS);
+    }
+#endif
+
+    memset(p_parms, 0, sizeof(tBTM_ESCO_DATA));
+    return (BTM_WRONG_MODE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ChangeEScoLinkParms
+**
+** Description      This function requests renegotiation of the parameters on
+**                  the current eSCO Link.  If any of the changes are accepted
+**                  by the controllers, the BTM_ESCO_CHG_EVT event is sent in
+**                  the tBTM_ESCO_CBACK function with the current settings of
+**                  the link. The callback is registered through the call to
+**                  BTM_SetEScoMode.
+**
+**                  Note: If called over a SCO link (including 1.1 controller),
+**                        a change packet type request is sent out instead.
+**
+** Returns          BTM_CMD_STARTED if command is successfully initiated.
+**                  BTM_NO_RESOURCES - not enough resources to initiate command.
+**                  BTM_WRONG_MODE if no connection with a peer device or bad sco_inx.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx, tBTM_CHG_ESCO_PARAMS *p_parms)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tBTM_ESCO_PARAMS *p_setup;
+    tSCO_CONN        *p_sco;
+    UINT16            temp_pkt_types;
+
+    /* Make sure sco handle is valid and on an active link */
+    if (sco_inx >= BTM_MAX_SCO_LINKS ||
+        btm_cb.sco_cb.sco_db[sco_inx].state != SCO_ST_CONNECTED)
+        return (BTM_WRONG_MODE);
+
+    p_sco = &btm_cb.sco_cb.sco_db[sco_inx];
+    p_setup = &p_sco->esco.setup;
+
+    /* If SCO connection OR eSCO not supported just send change packet types */
+    if (p_sco->esco.data.link_type == BTM_LINK_TYPE_SCO ||
+        !btm_cb.sco_cb.esco_supported)
+    {
+        p_setup->packet_types = p_parms->packet_types &
+            (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_LINK_ONLY_MASK);
+
+
+        BTM_TRACE_API2("BTM_ChangeEScoLinkParms -> SCO Link for handle 0x%04x, pkt 0x%04x",
+                         p_sco->hci_handle, p_setup->packet_types);
+
+        if (!btsnd_hcic_change_conn_type (p_sco->hci_handle,
+                                     BTM_ESCO_2_SCO(p_setup->packet_types)))
+            return (BTM_NO_RESOURCES);
+    }
+    else
+    {
+        temp_pkt_types = (p_parms->packet_types & BTM_SCO_SUPPORTED_PKTS_MASK &
+                             btm_cb.btm_sco_pkt_types_supported);
+
+        /* OR in any exception packet types if at least 2.0 version of spec */
+        if (btm_cb.devcb.local_version.hci_version >= HCI_PROTO_VERSION_2_0)
+        {
+            temp_pkt_types |= ((p_parms->packet_types & BTM_SCO_EXCEPTION_PKTS_MASK) |
+                (btm_cb.btm_sco_pkt_types_supported & BTM_SCO_EXCEPTION_PKTS_MASK));
+        }
+
+        BTM_TRACE_API1("BTM_ChangeEScoLinkParms -> eSCO Link for handle 0x%04x", p_sco->hci_handle);
+        BTM_TRACE_API6("      txbw 0x%x, rxbw 0x%x, lat 0x%x, voice 0x%x, retrans 0x%02x, pkt 0x%04x",
+                         p_setup->tx_bw, p_setup->rx_bw, p_parms->max_latency,
+                         p_setup->voice_contfmt, p_parms->retrans_effort, temp_pkt_types);
+
+        /* When changing an existing link, only change latency, retrans, and pkts */
+        if (!btsnd_hcic_setup_esco_conn(p_sco->hci_handle, p_setup->tx_bw,
+                                        p_setup->rx_bw, p_parms->max_latency,
+                                        p_setup->voice_contfmt,
+                                        p_parms->retrans_effort,
+                                        temp_pkt_types))
+            return (BTM_NO_RESOURCES);
+        else
+            p_parms->packet_types = temp_pkt_types;
+    }
+
+    return (BTM_CMD_STARTED);
+#else
+    return (BTM_WRONG_MODE);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_EScoConnRsp
+**
+** Description      This function is called upon receipt of an (e)SCO connection
+**                  request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject
+**                  the request. Parameters used to negotiate eSCO links.
+**                  If p_parms is NULL, then values set through BTM_SetEScoMode
+**                  are used.
+**                  If the link type of the incoming request is SCO, then only
+**                  the tx_bw, max_latency, content format, and packet_types are
+**                  valid.  The hci_status parameter should be
+**                  ([0x0] to accept, [0x0d..0x0f] to reject)
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status, tBTM_ESCO_PARAMS *p_parms)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    if (sco_inx < BTM_MAX_SCO_LINKS &&
+        btm_cb.sco_cb.sco_db[sco_inx].state == SCO_ST_W4_CONN_RSP)
+    {
+        btm_esco_conn_rsp(sco_inx, hci_status,
+                          btm_cb.sco_cb.sco_db[sco_inx].esco.data.bd_addr,
+                          p_parms);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_def_esco_mode
+**
+** Description      This function copies the current default esco settings into
+**                  the return buffer.
+**
+** Returns          tBTM_SCO_TYPE
+**
+*******************************************************************************/
+tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    *p_parms = btm_cb.sco_cb.def_esco_parms;
+    return btm_cb.sco_cb.desired_sco_mode;
+#else
+    return BTM_LINK_TYPE_SCO;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_esco_proc_conn_chg
+**
+** Description      This function is called by BTIF when an SCO connection
+**                  is changed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval,
+                             UINT8 retrans_window, UINT16 rx_pkt_len,
+                             UINT16 tx_pkt_len)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN               *p = &btm_cb.sco_cb.sco_db[0];
+    tBTM_CHG_ESCO_EVT_DATA   data;
+    UINT16                   xx;
+
+    BTM_TRACE_EVENT2("btm_esco_proc_conn_chg -> handle 0x%04x, status 0x%02x",
+                      handle, status);
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (p->state == SCO_ST_CONNECTED && handle == p->hci_handle)
+        {
+            /* If upper layer wants notification */
+            if (p->esco.p_esco_cback)
+            {
+                memcpy(data.bd_addr, p->esco.data.bd_addr, BD_ADDR_LEN);
+                data.hci_status = status;
+                data.sco_inx = xx;
+                data.rx_pkt_len = p->esco.data.rx_pkt_len = rx_pkt_len;
+                data.tx_pkt_len = p->esco.data.tx_pkt_len = tx_pkt_len;
+                data.tx_interval = p->esco.data.tx_interval = tx_interval;
+                data.retrans_window = p->esco.data.retrans_window = retrans_window;
+
+                (*p->esco.p_esco_cback)(BTM_ESCO_CHG_EVT,
+                                        (tBTM_ESCO_EVT_DATA *)&data);
+            }
+            return;
+        }
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_is_sco_active
+**
+** Description      This function is called to see if a SCO handle is already in
+**                  use.
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btm_is_sco_active (UINT16 handle)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    UINT16     xx;
+    tSCO_CONN *p = &btm_cb.sco_cb.sco_db[0];
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if (handle == p->hci_handle && p->state == SCO_ST_CONNECTED)
+            return (TRUE);
+    }
+#endif
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetNumScoLinks
+**
+** Description      This function returns the number of active sco links.
+**
+** Returns          UINT8
+**
+*******************************************************************************/
+UINT8 BTM_GetNumScoLinks (void)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    tSCO_CONN *p = &btm_cb.sco_cb.sco_db[0];
+    UINT16     xx;
+    UINT8      num_scos = 0;
+
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        switch (p->state)
+        {
+        case SCO_ST_W4_CONN_RSP:
+        case SCO_ST_CONNECTING:
+        case SCO_ST_CONNECTED:
+        case SCO_ST_DISCONNECTING:
+        case SCO_ST_PEND_UNPARK:
+            num_scos++;
+        }
+    }
+    return (num_scos);
+#else
+    return (0);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_is_sco_active_by_bdaddr
+**
+** Description      This function is called to see if a SCO active to a bd address.
+**
+** Returns          BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda)
+{
+#if (BTM_MAX_SCO_LINKS>0)
+    UINT8 xx;
+    tSCO_CONN *p = &btm_cb.sco_cb.sco_db[0];
+
+    /* If any SCO is being established to the remote BD address, refuse this */
+    for (xx = 0; xx < BTM_MAX_SCO_LINKS; xx++, p++)
+    {
+        if ((!memcmp (p->esco.data.bd_addr, remote_bda, BD_ADDR_LEN)) && (p->state == SCO_ST_CONNECTED))
+        {
+            return (TRUE);
+        }
+    }
+#endif
+    return (FALSE);
+}
+#else   /* SCO_EXCLUDED == TRUE (Link in stubs) */
+
+tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig,
+                           UINT16 pkt_types, UINT16 *p_sco_inx,
+                           tBTM_SCO_CB *p_conn_cb,
+                           tBTM_SCO_CB *p_disc_cb) {return (BTM_NO_RESOURCES);}
+tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx) {return (BTM_NO_RESOURCES);}
+tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types) {return (BTM_NO_RESOURCES);}
+UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx) {return (0);}
+UINT16 BTM_ReadDeviceScoPacketTypes (void) {return (0);}
+UINT16 BTM_ReadScoHandle (UINT16 sco_inx) {return (BTM_INVALID_HCI_HANDLE);}
+UINT8 *BTM_ReadScoBdAddr(UINT16 sco_inx) {return((UINT8 *) NULL);}
+UINT16 BTM_ReadScoDiscReason (void) {return (BTM_INVALID_SCO_DISC_REASON);}
+tBTM_STATUS BTM_SetEScoMode (tBTM_SCO_TYPE sco_mode, tBTM_ESCO_PARAMS *p_parms) {return (BTM_MODE_UNSUPPORTED);}
+tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx, tBTM_ESCO_CBACK *p_esco_cback) { return (BTM_ILLEGAL_VALUE);}
+tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx, tBTM_ESCO_DATA *p_parms) { return (BTM_MODE_UNSUPPORTED);}
+tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx, tBTM_CHG_ESCO_PARAMS *p_parms) { return (BTM_MODE_UNSUPPORTED);}
+void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status, tBTM_ESCO_PARAMS *p_parms) {}
+UINT8 BTM_GetNumScoLinks (void)  {return (0);}
+
+#endif /* If SCO is being used */
diff --git a/stack/btm/btm_sec.c b/stack/btm/btm_sec.c
new file mode 100644
index 0000000..956364e
--- /dev/null
+++ b/stack/btm/btm_sec.c
@@ -0,0 +1,5649 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for the Bluetooth Security Manager
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "l2c_int.h"
+
+#if (BT_USE_TRACES == TRUE && BT_TRACE_VERBOSE == FALSE)
+/* needed for sprintf() */
+#include <stdio.h>
+#endif
+
+#if BLE_INCLUDED == TRUE
+    #include "gatt_int.h"
+#endif
+
+#define BTM_SEC_MAX_COLLISION_DELAY     (GKI_SECS_TO_TICKS(5))
+
+#ifdef APPL_AUTH_WRITE_EXCEPTION
+BOOLEAN (APPL_AUTH_WRITE_EXCEPTION)(BD_ADDR bd_addr);
+#endif
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static tBTM_SEC_SERV_REC *btm_sec_find_first_serv (BOOLEAN is_originator, UINT16 psm);
+static tBTM_SEC_SERV_REC *btm_sec_find_next_serv (tBTM_SEC_SERV_REC *p_cur);
+static tBTM_SEC_SERV_REC *btm_sec_find_mx_serv (UINT8 is_originator, UINT16 psm,
+                                                UINT32 mx_proto_id,
+                                                UINT32 mx_chan_id);
+
+static tBTM_STATUS btm_sec_execute_procedure (tBTM_SEC_DEV_REC *p_dev_rec);
+static BOOLEAN  btm_sec_start_get_name (tBTM_SEC_DEV_REC *p_dev_rec);
+static BOOLEAN  btm_sec_start_authentication (tBTM_SEC_DEV_REC *p_dev_rec);
+static BOOLEAN  btm_sec_start_encryption (tBTM_SEC_DEV_REC *p_dev_rec);
+static void     btm_sec_collision_timeout (TIMER_LIST_ENT *p_tle);
+static void     btm_restore_mode(void);
+static void     btm_sec_pairing_timeout (TIMER_LIST_ENT *p_tle);
+static tBTM_STATUS btm_sec_dd_create_conn (tBTM_SEC_DEV_REC *p_dev_rec);
+static void     btm_sec_change_pairing_state (tBTM_PAIRING_STATE new_state);
+
+#if (BT_USE_TRACES == TRUE)
+static char     *btm_pair_state_descr (tBTM_PAIRING_STATE state);
+#endif
+
+static void     btm_sec_check_pending_reqs(void);
+static BOOLEAN  btm_sec_queue_mx_request (BD_ADDR bd_addr,  UINT16 psm,  BOOLEAN is_orig,
+                                          UINT32 mx_proto_id, UINT32 mx_chan_id,
+                                          tBTM_SEC_CALLBACK *p_callback, void *p_ref_data);
+static void     btm_sec_bond_cancel_complete (void);
+static void     btm_send_link_key_notif (tBTM_SEC_DEV_REC *p_dev_rec);
+static BOOLEAN  btm_sec_check_prefetch_pin (tBTM_SEC_DEV_REC  *p_dev_rec);
+
+static UINT8    btm_sec_start_authorization (tBTM_SEC_DEV_REC *p_dev_rec);
+BOOLEAN         btm_sec_are_all_trusted(UINT32 p_mask[]);
+
+static tBTM_STATUS btm_sec_send_hci_disconnect (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 reason);
+tBTM_SEC_DEV_REC *btm_sec_find_dev_by_sec_state (UINT8 state);
+
+static BOOLEAN  btm_sec_set_security_level ( CONNECTION_TYPE conn_type, char *p_name, UINT8 service_id,
+                                            UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id,
+                                            UINT32 mx_chan_id);
+
+/* TRUE - authenticated link key is possible */
+static const BOOLEAN btm_sec_io_map [BTM_IO_CAP_MAX][BTM_IO_CAP_MAX] =
+{
+    /*   OUT,    IO,     IN,     NONE */
+/* OUT  */ {FALSE,  FALSE,  TRUE,   FALSE},
+/* IO   */ {FALSE,  TRUE,   TRUE,   FALSE},
+/* IN   */ {TRUE,   TRUE,   TRUE,   FALSE},
+/* NONE */ {FALSE,  FALSE,  FALSE,  FALSE}
+};
+/*  BTM_IO_CAP_OUT      0   DisplayOnly */
+/*  BTM_IO_CAP_IO       1   DisplayYesNo */
+/*  BTM_IO_CAP_IN       2   KeyboardOnly */
+/*  BTM_IO_CAP_NONE     3   NoInputNoOutput */
+
+/*******************************************************************************
+**
+** Function         BTM_SecRegister
+**
+** Description      Application manager calls this function to register for
+**                  security services.  There can be one and only one application
+**                  saving link keys.  BTM allows only first registration.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN  BTM_SecRegister (tBTM_APPL_INFO *p_cb_info)
+{
+#if BLE_INCLUDED == TRUE
+    BT_OCTET16      temp_value = {0};
+#endif
+
+    BTM_TRACE_EVENT0 ("BTM_Sec: application registered");
+
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+    BTM_TRACE_ERROR1 ("BTM_SecRegister:p_cb_info->p_le_callback == 0x%x ", p_cb_info->p_le_callback);
+
+    if (p_cb_info->p_le_callback)
+    {
+#if SMP_INCLUDED == TRUE
+        BTM_TRACE_EVENT0 ("BTM_Sec: SMP_Register( btm_proc_smp_cback )");
+        SMP_Register(btm_proc_smp_cback);
+#endif
+        /* if no IR is loaded, need to regenerate all the keys */
+        if (memcmp(btm_cb.devcb.id_keys.ir, &temp_value, sizeof(BT_OCTET16)) == 0)
+        {
+            btm_ble_reset_id();
+        }
+    }
+    else
+    {
+        BTM_TRACE_ERROR0 ("BTM_SecRegister:p_cb_info->p_le_callback == NULL ");
+    }
+#endif
+
+
+
+    btm_cb.api = *p_cb_info;
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+     BTM_TRACE_ERROR1 ("BTM_SecRegister: btm_cb.api.p_le_callback = 0x%x ", btm_cb.api.p_le_callback);
+#endif
+    BTM_TRACE_EVENT0 ("BTM_Sec: application registered");
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecRegisterLinkKeyNotificationCallback
+**
+** Description      Application manager calls this function to register for
+**                  link key notification.  When there is nobody registered
+**                  we should avoid changing link key
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SecRegisterLinkKeyNotificationCallback (tBTM_LINK_KEY_CALLBACK *p_callback)
+{
+    btm_cb.api.p_link_key_callback = p_callback;
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddRmtNameNotifyCallback
+**
+** Description      Any profile can register to be notified when name of the
+**                  remote device is resolved.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN  BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback)
+{
+    int i;
+
+    for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++)
+    {
+        if (btm_cb.p_rmt_name_callback[i] == NULL)
+        {
+            btm_cb.p_rmt_name_callback[i] = p_callback;
+            return(TRUE);
+        }
+    }
+
+    return(FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecDeleteRmtNameNotifyCallback
+**
+** Description      Any profile can deregister notification when a new Link Key
+**                  is generated per connection.
+**
+** Returns          TRUE if OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN  BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback)
+{
+    int i;
+
+    for (i = 0; i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++)
+    {
+        if (btm_cb.p_rmt_name_callback[i] == p_callback)
+        {
+            btm_cb.p_rmt_name_callback[i] = NULL;
+            return(TRUE);
+        }
+    }
+
+    return(FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecSetConnectFilterCallback
+**
+** Description      Host can register to be asked whenever a HCI connection
+**                  request is received.  In the registered function host
+**                  suppose to check connectibility filters.  Yes/No result
+**                  should be returned syncronously
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SecSetConnectFilterCallback (tBTM_FILTER_CB *p_callback)
+{
+    btm_cb.p_conn_filter_cb = p_callback;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetSecurityMode
+**
+** Description      Get security mode for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8 BTM_GetSecurityMode (void)
+{
+    return(btm_cb.security_mode);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_GetSecurityFlags
+**
+** Description      Get security flags for the device
+**
+** Returns          BOOLEAN TRUE or FALSE is device found
+**
+*******************************************************************************/
+BOOLEAN BTM_GetSecurityFlags (BD_ADDR bd_addr, UINT8 * p_sec_flags)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+    {
+        *p_sec_flags = p_dev_rec->sec_flags;
+        return(TRUE);
+    }
+    BTM_TRACE_ERROR0 ("BTM_GetSecurityFlags false");
+    return(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetSecurityMode
+**
+** Description      Set security mode for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetSecurityMode (UINT8 security_mode)
+{
+    UINT8   old_mode = btm_cb.security_mode;
+
+    UINT8   sp_mode = HCI_SPD_MODE_ENABLED;
+    UINT8   sp_debug_mode = HCI_SPD_MODE_DISABLED;
+
+    switch (security_mode)
+    {
+#if (BTM_PRE_LISBON_INCLUDED == TRUE)
+        case BTM_SEC_MODE_NONE:
+        case BTM_SEC_MODE_SERVICE:
+        case BTM_SEC_MODE_LINK:
+            break;
+#endif
+
+        case BTM_SEC_MODE_SP_DEBUG:
+            sp_debug_mode = HCI_SPD_MODE_ENABLED;
+            break;
+        case BTM_SEC_MODE_SP:
+            /* the default is enabled */
+            break;
+        default:
+            BTM_TRACE_ERROR1 ("BTM_SetSecurityMode: unknown mode:%d", security_mode);
+            return;
+    }
+    btm_cb.security_mode = security_mode;
+
+    if (HCI_SIMPLE_PAIRING_SUPPORTED(btm_cb.devcb.local_features))
+    {
+        /* Lisbon devices and only use BTM_SEC_MODE_SP */
+        btm_cb.security_mode = BTM_SEC_MODE_SP;
+        BTM_TRACE_DEBUG2("BTM_SetSecurityMode: SP:%d, debug:%d", sp_mode, sp_debug_mode);
+        btsnd_hcic_write_simple_pairing_mode(sp_mode);
+        btsnd_hcic_write_simp_pair_debug_mode(sp_debug_mode);
+        return;
+    }
+
+    /* must be a pre-Lisbon device */
+#if (BTM_PRE_LISBON_INCLUDED == TRUE)
+    /* If previously security mode was Link Level and now lesser notify */
+    /* controller not to perform authentication, encryption on startup  */
+    if ((old_mode == BTM_SEC_MODE_LINK)
+        && (       security_mode != BTM_SEC_MODE_LINK))
+    {
+        BTM_TRACE_DEBUG0("BTM_SetSecurityMode: Authen Enable -> FALSE");
+        btsnd_hcic_write_auth_enable (FALSE);
+        btsnd_hcic_write_encr_mode (HCI_ENCRYPT_MODE_DISABLED);
+    }
+
+    /* If previously security is increased to Link Level notify */
+    /* controller to perform authentication, encryption on startup  */
+    if ((old_mode != BTM_SEC_MODE_LINK)
+        && (       security_mode == BTM_SEC_MODE_LINK))
+    {
+        BTM_TRACE_DEBUG0("BTM_SetSecurityMode: Authen Enable -> TRUE");
+        btsnd_hcic_write_auth_enable (TRUE);
+        btsnd_hcic_write_encr_mode (HCI_ENCRYPT_MODE_POINT_TO_POINT);
+    }
+#endif  /* BTM_PRE_LISBON_INCLUDED == TRUE */
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetPinType
+**
+** Description      Set PIN type for the device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetPinType (UINT8 pin_type, PIN_CODE pin_code, UINT8 pin_code_len)
+{
+    BTM_TRACE_API3 ("BTM_SetPinType: pin type %d [variable-0, fixed-1], code %s, length %d",
+                    pin_type, (char *) pin_code, pin_code_len);
+
+    /* If device is not up security mode will be set as a part of startup */
+    if ( (btm_cb.cfg.pin_type != pin_type)
+         && (btm_cb.devcb.state > BTM_DEV_STATE_WAIT_AFTER_RESET) )
+    {
+        btsnd_hcic_write_pin_type (pin_type);
+    }
+
+    btm_cb.cfg.pin_type     = pin_type;
+    btm_cb.cfg.pin_code_len = pin_code_len;
+    memcpy (btm_cb.cfg.pin_code, pin_code, pin_code_len);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetPairableMode
+**
+** Description      Enable or disable pairing
+**
+** Parameters       allow_pairing - (TRUE or FALSE) whether or not the device
+**                      allows pairing.
+**                  connect_only_paired - (TRUE or FALSE) whether or not to
+**                      only allow paired devices to connect.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetPairableMode (BOOLEAN allow_pairing, BOOLEAN connect_only_paired)
+{
+    BTM_TRACE_API2 ("BTM_SetPairableMode()  allow_pairing: %u   connect_only_paired: %u", allow_pairing, connect_only_paired);
+
+    btm_cb.pairing_disabled    = !allow_pairing;
+    btm_cb.connect_only_paired = connect_only_paired;
+}
+
+
+#define BTM_NO_AVAIL_SEC_SERVICES   ((UINT16) 0xffff)
+
+/*******************************************************************************
+**
+** Function         BTM_SetUCDSecurityLevel
+**
+** Description      Register UCD service security level with Security Manager
+**
+** Parameters:      is_originator - TRUE if originating the connection, FALSE if not
+**                  p_name      - Name of the service relevant only if
+**                                authorization will show this name to user. ignored
+**                                if BTM_SEC_SERVICE_NAME_LEN is 0.
+**                  service_id  - service ID for the service passed to authorization callback
+**                  sec_level   - bit mask of the security features
+**                  psm         - L2CAP PSM
+**                  mx_proto_id - protocol ID of multiplexing proto below
+**                  mx_chan_id  - channel ID of multiplexing proto below
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SetUCDSecurityLevel (BOOLEAN is_originator, char *p_name, UINT8 service_id,
+                                 UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id,
+                                 UINT32 mx_chan_id)
+{
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    CONNECTION_TYPE conn_type;
+
+    if (is_originator)
+        conn_type = CONNLESS_ORIG;
+    else
+        conn_type = CONNLESS_TERM;
+
+    return(btm_sec_set_security_level (conn_type, p_name, service_id,
+                                       sec_level, psm, mx_proto_id, mx_chan_id));
+#else
+    return FALSE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetSecurityLevel
+**
+** Description      Register service security level with Security Manager
+**
+** Parameters:      is_originator - TRUE if originating the connection, FALSE if not
+**                  p_name      - Name of the service relevant only if
+**                                authorization will show this name to user. ignored
+**                                if BTM_SEC_SERVICE_NAME_LEN is 0.
+**                  service_id  - service ID for the service passed to authorization callback
+**                  sec_level   - bit mask of the security features
+**                  psm         - L2CAP PSM
+**                  mx_proto_id - protocol ID of multiplexing proto below
+**                  mx_chan_id  - channel ID of multiplexing proto below
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN BTM_SetSecurityLevel (BOOLEAN is_originator, char *p_name, UINT8 service_id,
+                              UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id,
+                              UINT32 mx_chan_id)
+{
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    CONNECTION_TYPE conn_type;
+
+    if (is_originator)
+        conn_type = CONN_ORIENT_ORIG;
+    else
+        conn_type = CONN_ORIENT_TERM;
+
+    return(btm_sec_set_security_level (conn_type, p_name, service_id,
+                                       sec_level, psm, mx_proto_id, mx_chan_id));
+#else
+    return(btm_sec_set_security_level (is_originator, p_name, service_id,
+                                       sec_level, psm, mx_proto_id, mx_chan_id));
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_set_security_level
+**
+** Description      Register service security level with Security Manager
+**
+** Parameters:      conn_type   - TRUE if originating the connection, FALSE if not
+**                  p_name      - Name of the service relevant only if
+**                                authorization will show this name to user. ignored
+**                                if BTM_SEC_SERVICE_NAME_LEN is 0.
+**                  service_id  - service ID for the service passed to authorization callback
+**                  sec_level   - bit mask of the security features
+**                  psm         - L2CAP PSM
+**                  mx_proto_id - protocol ID of multiplexing proto below
+**                  mx_chan_id  - channel ID of multiplexing proto below
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+static BOOLEAN btm_sec_set_security_level (CONNECTION_TYPE conn_type, char *p_name, UINT8 service_id,
+                                           UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id,
+                                           UINT32 mx_chan_id)
+{
+    tBTM_SEC_SERV_REC   *p_srec;
+    UINT16               index;
+    UINT16               first_unused_record = BTM_NO_AVAIL_SEC_SERVICES;
+    BOOLEAN              record_allocated = FALSE;
+    BOOLEAN              is_originator;
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    BOOLEAN              is_ucd;
+
+    if (conn_type & CONNECTION_TYPE_ORIG_MASK)
+        is_originator = TRUE;
+    else
+        is_originator = FALSE;
+
+    if (conn_type & CONNECTION_TYPE_CONNLESS_MASK )
+    {
+        is_ucd = TRUE;
+    }
+    else
+    {
+        is_ucd = FALSE;
+    }
+#else
+    is_originator = conn_type;
+#endif
+
+    /* See if the record can be reused (same service name, psm, mx_proto_id,
+       service_id, and mx_chan_id), or obtain the next unused record */
+
+    p_srec = &btm_cb.sec_serv_rec[0];
+
+
+    for (index = 0; index < BTM_SEC_MAX_SERVICE_RECORDS; index++, p_srec++)
+    {
+        /* Check if there is already a record for this service */
+        if (p_srec->security_flags & BTM_SEC_IN_USE)
+        {
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+            if (p_srec->psm == psm                  &&
+                p_srec->mx_proto_id == mx_proto_id  &&
+                service_id == p_srec->service_id    &&
+                (!strncmp (p_name, (char *) p_srec->orig_service_name,
+                           BTM_SEC_SERVICE_NAME_LEN) ||
+                 !strncmp (p_name, (char *) p_srec->term_service_name,
+                           BTM_SEC_SERVICE_NAME_LEN)))
+#else
+            if (p_srec->psm == psm                  &&
+                p_srec->mx_proto_id == mx_proto_id  &&
+                service_id == p_srec->service_id)
+#endif
+            {
+                record_allocated = TRUE;
+                break;
+            }
+        }
+        /* Mark the first available service record */
+        else if (!record_allocated)
+        {
+            memset (p_srec, 0, sizeof(tBTM_SEC_SERV_REC));
+            record_allocated = TRUE;
+            first_unused_record = index;
+        }
+    }
+
+    if (!record_allocated)
+    {
+        BTM_TRACE_WARNING1("BTM_SEC_REG: Out of Service Records (%d)",  BTM_SEC_MAX_SERVICE_RECORDS);
+        return(record_allocated);
+    }
+
+    /* Process the request if service record is valid */
+    /* If a duplicate service wasn't found, use the first available */
+    if (index >= BTM_SEC_MAX_SERVICE_RECORDS)
+    {
+        index = first_unused_record;
+        p_srec = &btm_cb.sec_serv_rec[index];
+    }
+
+    p_srec->psm         = psm;
+    p_srec->service_id  = service_id;
+    p_srec->mx_proto_id = mx_proto_id;
+
+    if (is_originator)
+    {
+        p_srec->orig_mx_chan_id = mx_chan_id;
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+        BCM_STRNCPY_S ((char *)p_srec->orig_service_name, sizeof(p_srec->orig_service_name), p_name, BTM_SEC_SERVICE_NAME_LEN);
+#endif
+        /* clear out the old setting, just in case it exists */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        if ( is_ucd )
+        {
+            p_srec->ucd_security_flags &=
+            ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_ENCRYPT    | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_MITM |
+              BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE);
+        }
+        else
+#endif
+        {
+            p_srec->security_flags &=
+            ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_ENCRYPT    | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_MITM |
+              BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE);
+        }
+
+        /* Parameter validation.  Originator should not set requirements for incoming connections */
+        sec_level &= ~(BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_MITM);
+
+        if (btm_cb.security_mode == BTM_SEC_MODE_SP)
+        {
+            if (sec_level & BTM_SEC_OUT_AUTHENTICATE)
+                sec_level |= BTM_SEC_OUT_MITM;
+        }
+
+        /* Make sure the authenticate bit is set, when encrypt bit is set */
+        if (sec_level & BTM_SEC_OUT_ENCRYPT)
+            sec_level |= BTM_SEC_OUT_AUTHENTICATE;
+
+        /* outgoing connections usually set the security level right before
+         * the connection is initiated.
+         * set it to be the outgoing service */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        if ( is_ucd == FALSE )
+#endif
+        {
+            btm_cb.p_out_serv = p_srec;
+        }
+    }
+    else
+    {
+        p_srec->term_mx_chan_id = mx_chan_id;
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+        BCM_STRNCPY_S ((char *)p_srec->term_service_name, sizeof(p_srec->term_service_name), p_name, BTM_SEC_SERVICE_NAME_LEN);
+#endif
+        /* clear out the old setting, just in case it exists */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        if ( is_ucd )
+        {
+            p_srec->ucd_security_flags &=
+            ~(BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT     | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_MITM |
+              BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE);
+        }
+        else
+#endif
+        {
+            p_srec->security_flags &=
+            ~(BTM_SEC_IN_AUTHORIZE | BTM_SEC_IN_ENCRYPT     | BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_MITM |
+              BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER | BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE);
+        }
+
+        /* Parameter validation.  Acceptor should not set requirements for outgoing connections */
+        sec_level &= ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_MITM);
+
+        if (btm_cb.security_mode == BTM_SEC_MODE_SP)
+        {
+            if (sec_level & BTM_SEC_IN_AUTHENTICATE)
+                sec_level |= BTM_SEC_IN_MITM;
+        }
+
+        /* Make sure the authenticate bit is set, when encrypt bit is set */
+        if (sec_level & BTM_SEC_IN_ENCRYPT)
+            sec_level |= BTM_SEC_IN_AUTHENTICATE;
+    }
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( is_ucd )
+    {
+        p_srec->security_flags     |= (UINT16)(BTM_SEC_IN_USE);
+        p_srec->ucd_security_flags |= (UINT16)(sec_level | BTM_SEC_IN_USE);
+    }
+    else
+    {
+        p_srec->security_flags |= (UINT16)(sec_level | BTM_SEC_IN_USE);
+    }
+
+    BTM_TRACE_API6("BTM_SEC_REG[%d]: id %d, conn_type 0x%x, psm 0x%04x, proto_id %d, chan_id %d",
+                   index, service_id, conn_type, psm, mx_proto_id, mx_chan_id);
+
+    BTM_TRACE_API2("               : security_flags: 0x%04x, ucd_security_flags: 0x%04x",
+                   p_srec->security_flags, p_srec->ucd_security_flags);
+
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+    BTM_TRACE_API2("               : service name [%s] (up to %d chars saved)",
+                   p_name, BTM_SEC_SERVICE_NAME_LEN);
+#endif
+#else
+    p_srec->security_flags |= (UINT16)(sec_level | BTM_SEC_IN_USE);
+
+    BTM_TRACE_API6("BTM_SEC_REG[%d]: id %d, is_orig %d, psm 0x%04x, proto_id %d, chan_id %d",
+                   index, service_id, is_originator, psm, mx_proto_id, mx_chan_id);
+
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+    BTM_TRACE_API3("               : sec: 0x%x, service name [%s] (up to %d chars saved)",
+                   p_srec->security_flags, p_name, BTM_SEC_SERVICE_NAME_LEN);
+#endif
+#endif
+
+
+    return(record_allocated);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecClrService
+**
+** Description      Removes specified service record(s) from the security database.
+**                  All service records with the specified name are removed.
+**                  Typically used only by devices with limited RAM so that it can
+**                  reuse an old security service record.
+**
+**                  Note: Unpredictable results may occur if a service is cleared
+**                      that is still in use by an application/profile.
+**
+** Parameters       Service ID - Id of the service to remove. ('0' removes all service
+**                          records (except SDP).
+**
+** Returns          Number of records that were freed.
+**
+*******************************************************************************/
+UINT8 BTM_SecClrService (UINT8 service_id)
+{
+    tBTM_SEC_SERV_REC   *p_srec = &btm_cb.sec_serv_rec[0];
+    UINT8   num_freed = 0;
+    int     i;
+
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_srec++)
+    {
+        /* Delete services with specified name (if in use and not SDP) */
+        if ((p_srec->security_flags & BTM_SEC_IN_USE) && (p_srec->psm != BT_PSM_SDP) &&
+            (!service_id || (service_id == p_srec->service_id)))
+        {
+            BTM_TRACE_API2("BTM_SEC_CLR[%d]: id %d", i, service_id);
+            p_srec->security_flags = 0;
+#if (L2CAP_UCD_INCLUDED == TRUE)
+            p_srec->ucd_security_flags = 0;
+#endif
+            num_freed++;
+        }
+    }
+
+    return(num_freed);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_clr_service_by_psm
+**
+** Description      Removes specified service record from the security database.
+**                  All service records with the specified psm are removed.
+**                  Typically used by L2CAP to free up the service record used
+**                  by dynamic PSM clients when the channel is closed.
+**                  The given psm must be a virtual psm.
+**
+** Parameters       Service ID - Id of the service to remove. ('0' removes all service
+**                          records (except SDP).
+**
+** Returns          Number of records that were freed.
+**
+*******************************************************************************/
+UINT8 btm_sec_clr_service_by_psm (UINT16 psm)
+{
+    tBTM_SEC_SERV_REC   *p_srec = &btm_cb.sec_serv_rec[0];
+    UINT8   num_freed = 0;
+    int     i;
+
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_srec++)
+    {
+        /* Delete services with specified name (if in use and not SDP) */
+        if ((p_srec->security_flags & BTM_SEC_IN_USE) && (p_srec->psm == psm) )
+        {
+            BTM_TRACE_API2("BTM_SEC_CLR[%d]: id %d ", i, p_srec->service_id);
+            p_srec->security_flags = 0;
+            num_freed++;
+        }
+    }
+    BTM_TRACE_API2("btm_sec_clr_service_by_psm psm:0x%x num_freed:%d", psm, num_freed);
+
+    return(num_freed);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecClrUCDService
+**
+** Description
+**
+** Parameters       Service ID - Id of the service to remove.
+**                               ('0' removes all service records )
+**
+** Returns          Number of records that were cleared.
+**
+*******************************************************************************/
+UINT8 BTM_SecClrUCDService (UINT8 service_id)
+{
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    tBTM_SEC_SERV_REC   *p_srec = &btm_cb.sec_serv_rec[0];
+    UINT8   num_cleared = 0;
+    int     i;
+
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_srec++)
+    {
+        /* Delete services with specified name (if in use and not SDP) */
+        if ((p_srec->security_flags & BTM_SEC_IN_USE) &&
+            (!service_id || (service_id == (UINT32)p_srec->service_id)))
+        {
+            BTM_TRACE_API2("BTM_UCD_SEC_CLR[%d]: id %d", i, service_id);
+            p_srec->ucd_security_flags = 0;
+            num_cleared++;
+        }
+    }
+
+    return(num_cleared);
+#else
+    return(0);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         BTM_PINCodeReply
+**
+** Description      This function is called after Security Manager submitted
+**                  PIN code request to the UI.
+**
+** Parameters:      bd_addr      - Address of the device for which PIN was requested
+**                  res          - result of the operation BTM_SUCCESS if success
+**                  pin_len      - length in bytes of the PIN Code
+**                  p_pin        - pointer to array with the PIN Code
+**                  trusted_mask - bitwise OR of trusted services (array of UINT32)
+**
+*******************************************************************************/
+void BTM_PINCodeReply (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[])
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_API4 ("BTM_PINCodeReply(): PairState: %s   PairFlags: 0x%02x  PinLen:%d  Result:%d",
+                    btm_pair_state_descr(btm_cb.pairing_state), btm_cb.pairing_flags, pin_len, res);
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_PIN)
+    {
+        BTM_TRACE_WARNING1 ("BTM_PINCodeReply() - Wrong State: %d", btm_cb.pairing_state);
+        return;
+    }
+
+    if (memcmp (bd_addr, btm_cb.pairing_bda, BD_ADDR_LEN) != 0)
+    {
+        BTM_TRACE_ERROR0 ("BTM_PINCodeReply() - Wrong BD Addr");
+        return;
+    }
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+    {
+        BTM_TRACE_ERROR0 ("BTM_PINCodeReply() - no dev CB");
+        return;
+    }
+
+    if ( (pin_len > PIN_CODE_LEN) || (pin_len == 0) || (p_pin == NULL) )
+        res = BTM_ILLEGAL_VALUE;
+
+    if (res != BTM_SUCCESS)
+    {
+        /* if peer started dd OR we started dd and pre-fetch pin was not used send negative reply */
+        if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PEER_STARTED_DD) ||
+            ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) &&
+            (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE)) )
+        {
+            /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed event */
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+            btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+
+            btsnd_hcic_pin_code_neg_reply (bd_addr);
+        }
+        else
+        {
+            p_dev_rec->security_required = BTM_SEC_NONE;
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+        }
+        return;
+    }
+    if (trusted_mask)
+        BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask);
+    p_dev_rec->sec_flags   |= BTM_SEC_LINK_KEY_AUTHED;
+
+    if ( (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+         &&  (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE)
+         &&  (btm_cb.security_mode_changed == FALSE) )
+    {
+        /* This is start of the dedicated bonding if local device is 2.0 */
+        btm_cb.pin_code_len = pin_len;
+        memcpy (btm_cb.pin_code, p_pin, pin_len);
+
+        btm_cb.security_mode_changed = TRUE;
+#ifdef APPL_AUTH_WRITE_EXCEPTION
+        if(!(APPL_AUTH_WRITE_EXCEPTION)(p_dev_rec->bd_addr))
+#endif
+        btsnd_hcic_write_auth_enable (TRUE);
+
+        btm_cb.acl_disc_reason = 0xff ;
+
+        /* if we rejected incoming connection request, we have to wait HCI_Connection_Complete event */
+        /*  before originating  */
+        if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT)
+        {
+            BTM_TRACE_WARNING0 ("BTM_PINCodeReply(): waiting HCI_Connection_Complete after rejected incoming connection");
+            /* we change state little bit early so btm_sec_connected() will originate connection */
+            /*   when existing ACL link is down completely */
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_PIN_REQ);
+        }
+        /* if we already accepted incoming connection from pairing device */
+        else if (p_dev_rec->sm4 & BTM_SM4_CONN_PEND)
+        {
+            BTM_TRACE_WARNING0 ("BTM_PINCodeReply(): link is connecting so wait pin code request from peer");
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_PIN_REQ);
+        }
+        else if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED)
+        {
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_AUTHED;
+
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,  p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, HCI_ERR_AUTH_FAILURE);
+        }
+        return;
+    }
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+    btm_cb.acl_disc_reason = HCI_SUCCESS;
+
+#ifdef PORCHE_PAIRING_CONFLICT
+    BTM_TRACE_EVENT2("BTM_PINCodeReply(): Saving pin_len: %d btm_cb.pin_code_len: %d", pin_len, btm_cb.pin_code_len);
+    /* if this was not pre-fetched, save the PIN */
+    if (btm_cb.pin_code_len == 0)
+        memcpy (btm_cb.pin_code, p_pin, pin_len);
+    btm_cb.pin_code_len_saved = pin_len;
+#endif
+    btsnd_hcic_pin_code_req_reply (bd_addr, pin_len, p_pin);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_DeviceAuthorized
+**
+** Description      This function is called after Security Manager submitted
+**                  authorization request to the UI.
+**
+** Parameters:      bd_addr     - Address of the device for which PIN was requested
+**                  res         - result of the operation BTM_SUCCESS if success
+**
+*******************************************************************************/
+void BTM_DeviceAuthorized (BD_ADDR bd_addr, UINT8 res, UINT32 trusted_mask[])
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+    {
+        BTM_TRACE_WARNING6 ("Security Manager: Attempting Authorization of Unknown Device Address [%02x%02x%02x%02x%02x%02x]",
+                            bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
+        return;
+    }
+
+    BTM_TRACE_EVENT4 ("Security Manager: authorized status:%d State:%d Trusted:%08x %08x",
+                      res, (p_dev_rec) ? p_dev_rec->sec_state : 0, trusted_mask[0], trusted_mask[1]);
+
+    if (res == BTM_SUCCESS)
+    {
+        p_dev_rec->sec_flags   |= BTM_SEC_AUTHORIZED;
+        if (trusted_mask)
+            BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask);
+    }
+
+    if (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHORIZING)
+        return;
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+
+    if (res != BTM_SUCCESS)
+    {
+        btm_sec_dev_rec_cback_event (p_dev_rec, res);
+        return;
+    }
+
+    if ((res = (UINT8)btm_sec_execute_procedure (p_dev_rec)) != BTM_CMD_STARTED)
+    {
+        btm_sec_dev_rec_cback_event (p_dev_rec, res);
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecBond
+**
+** Description      This function is called to perform bonding with peer device.
+**                  If the connection is already up, but not secure, pairing
+**                  is attempted.  If already paired BTM_SUCCESS is returned.
+**
+** Parameters:      bd_addr      - Address of the device to bond
+**                  pin_len      - length in bytes of the PIN Code
+**                  p_pin        - pointer to array with the PIN Code
+**                  trusted_mask - bitwise OR of trusted services (array of UINT32)
+**
+**  Note: After 2.1 parameters are not used and preserved here not to change API
+*******************************************************************************/
+tBTM_STATUS BTM_SecBond (BD_ADDR bd_addr, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[])
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    tBTM_STATUS      status;
+#if SMP_INCLUDED == TRUE
+    tACL_CONN   *p=NULL;
+    BOOLEAN     is_le_slave_role=FALSE;
+#endif
+    BTM_TRACE_API6 ("BTM_SecBond BDA: %02x:%02x:%02x:%02x:%02x:%02x",
+                    bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
+
+    /* Other security process is in progress */
+    if (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+    {
+        BTM_TRACE_ERROR1 ("BTM_SecBond: already busy in state: %s", btm_pair_state_descr(btm_cb.pairing_state));
+        return(BTM_WRONG_MODE);
+    }
+
+
+    p_dev_rec = btm_find_or_alloc_dev (bd_addr);
+    BTM_TRACE_DEBUG1 ("before update sec_flags=0x%x", p_dev_rec->sec_flags);
+
+
+#if SMP_INCLUDED == TRUE
+    p = btm_bda_to_acl(bd_addr);
+    if (p && p->is_le_link )
+    {
+        if (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING)
+        {
+            BTM_TRACE_ERROR1 ("BTM_SecBond: LE already busy in state: %x", p_dev_rec->sec_state );
+            return(BTM_WRONG_MODE);
+        }
+
+        if (p->link_role == BTM_ROLE_SLAVE)
+        {
+            is_le_slave_role = TRUE;
+            BTM_TRACE_DEBUG0 ("LE Link Slave" );
+        }
+        else
+        {
+            BTM_TRACE_DEBUG0 ("LE Link Maste" );
+        }
+    }
+    else
+    {
+        BTM_TRACE_DEBUG0 ("No LE Link" );
+    }
+
+    if (!is_le_slave_role)
+    {
+        /* Finished if connection is active and already paired */
+        if ( (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)
+             &&  (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED) )
+        {
+            BTM_TRACE_WARNING0("BTM_SecBond -> Already Paired");
+            return(BTM_SUCCESS);
+        }
+    }
+#else
+    /* Finished if connection is active and already paired */
+    if ( (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)
+         &&  (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED) )
+    {
+        BTM_TRACE_WARNING0("BTM_SecBond -> Already Paired");
+        return(BTM_SUCCESS);
+    }
+#endif
+
+    /* Tell controller to get rid of the link key if it has one stored */
+    if ((BTM_DeleteStoredLinkKey (bd_addr, NULL)) != BTM_SUCCESS)
+        return(BTM_NO_RESOURCES);
+
+    /* Save the PIN code if we got a valid one */
+    if (p_pin && (pin_len <= PIN_CODE_LEN) && (pin_len != 0))
+    {
+        btm_cb.pin_code_len = pin_len;
+        memcpy (btm_cb.pin_code, p_pin, PIN_CODE_LEN);
+    }
+
+    memcpy (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN);
+
+    btm_cb.pairing_flags = BTM_PAIR_FLAGS_WE_STARTED_DD;
+
+    p_dev_rec->security_required = BTM_SEC_OUT_AUTHENTICATE;
+    p_dev_rec->is_originator     = TRUE;
+    if (trusted_mask)
+        BTM_SEC_COPY_TRUSTED_DEVICE(trusted_mask, p_dev_rec->trusted_mask);
+
+
+
+#if SMP_INCLUDED == TRUE
+
+    if (!is_le_slave_role)
+    {
+        p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED
+                                  | BTM_SEC_ROLE_SWITCHED  | BTM_SEC_LINK_KEY_AUTHED);
+
+    }
+
+    /* LE device, do SMP pairing */
+    if (p_dev_rec->device_type == BT_DEVICE_TYPE_BLE)
+    {
+        if (SMP_Pair(p_dev_rec->bd_addr) == SMP_STARTED)
+        {
+            p_dev_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
+            return BTM_CMD_STARTED;
+        }
+        else
+            return(BTM_NO_RESOURCES);
+    }
+#else
+    p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED
+                              | BTM_SEC_ROLE_SWITCHED  | BTM_SEC_LINK_KEY_AUTHED);
+#endif
+
+    BTM_TRACE_DEBUG1 ("after update sec_flags=0x%x", p_dev_rec->sec_flags);
+    if (!HCI_SIMPLE_PAIRING_SUPPORTED(btm_cb.devcb.local_features))
+    {
+        /* The special case when we authenticate keyboard.  Set pin type to fixed */
+        /* It would be probably better to do it from the application, but it is */
+        /* complicated */
+        if (((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) == BTM_COD_MAJOR_PERIPHERAL)
+            && (p_dev_rec->dev_class[2] & BTM_COD_MINOR_KEYBOARD)
+            && (btm_cb.cfg.pin_type != HCI_PIN_TYPE_FIXED))
+        {
+            btm_cb.pin_type_changed = TRUE;
+            btsnd_hcic_write_pin_type (HCI_PIN_TYPE_FIXED);
+        }
+    }
+
+    BTM_TRACE_EVENT1("BTM_SecBond: Local device supports SSP=%d", HCI_SIMPLE_PAIRING_SUPPORTED(btm_cb.devcb.local_features));
+
+    BTM_TRACE_EVENT4("  remote_features=%02x-%02x-%02x-%02x",
+                     p_dev_rec->features[0], p_dev_rec->features[1], p_dev_rec->features[2], p_dev_rec->features[3]);
+    BTM_TRACE_EVENT4("                  %02x-%02x-%02x-%02x",
+                     p_dev_rec->features[4], p_dev_rec->features[5], p_dev_rec->features[6], p_dev_rec->features[7]);
+
+    BTM_TRACE_EVENT2 ("BTM_SecBond: Remote sm4: 0x%x  HCI Handle: 0x%04x", p_dev_rec->sm4, p_dev_rec->hci_handle);
+
+#if BTM_SEC_FORCE_RNR_FOR_DBOND == TRUE
+    p_dev_rec->sec_flags &= ~BTM_SEC_NAME_KNOWN;
+#endif
+
+    /* If connection already exists... */
+    if (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)
+    {
+        if (!btm_sec_start_authentication (p_dev_rec))
+            return(BTM_NO_RESOURCES);
+
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_PIN_REQ);
+
+        /* Mark lcb as bonding */
+        l2cu_update_lcb_4_bonding (bd_addr, TRUE);
+        return(BTM_CMD_STARTED);
+    }
+
+    BTM_TRACE_DEBUG2 ("sec mode: %d sm4:x%x", btm_cb.security_mode, p_dev_rec->sm4);
+    if (!HCI_SIMPLE_PAIRING_SUPPORTED(btm_cb.devcb.local_features)
+        || (p_dev_rec->sm4 == BTM_SM4_KNOWN))
+    {
+        if ( btm_sec_check_prefetch_pin (p_dev_rec) )
+	        return(BTM_CMD_STARTED);
+    }
+    if (BTM_SEC_MODE_SP == btm_cb.security_mode && BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4))
+    {
+        /* local is 2.1 and peer is unknown */
+        if ((p_dev_rec->sm4 & BTM_SM4_CONN_PEND) == 0)
+        {
+            /* we are not accepting connection request from peer
+             * -> RNR (to learn if peer is 2.1)
+             * RNR when no ACL causes HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT */
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_GET_REM_NAME);
+            BTM_ReadRemoteDeviceName(bd_addr, NULL);
+        }
+        else
+        {
+            /* We are accepting connection request from peer */
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_PIN_REQ);
+        }
+        BTM_TRACE_DEBUG3 ("State:%s sm4: 0x%x sec_state:%d", btm_pair_state_descr (btm_cb.pairing_state), p_dev_rec->sm4, p_dev_rec->sec_state);
+        return BTM_CMD_STARTED;
+    }
+
+    /* both local and peer are 2.1  */
+    status = btm_sec_dd_create_conn(p_dev_rec);
+
+    if (status != BTM_CMD_STARTED)
+    {
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecBondCancel
+**
+** Description      This function is called to cancel ongoing bonding process
+**                  with peer device.
+**
+** Parameters:      bd_addr      - Address of the peer device
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SecBondCancel (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+#if SMP_INCLUDED == TRUE
+    tACL_CONN   *p=NULL;
+#endif
+
+    BTM_TRACE_API2 ("BTM_SecBondCancel()  State: %s flags:0x%x",
+                    btm_pair_state_descr (btm_cb.pairing_state), btm_cb.pairing_flags);
+
+    if (((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+        ||  (memcmp (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN) != 0) )
+        return BTM_UNKNOWN_ADDR;
+
+#if SMP_INCLUDED == TRUE
+    p = btm_bda_to_acl(bd_addr);
+    if (p && p->is_le_link &&
+        (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING))
+    {
+        BTM_TRACE_DEBUG0 ("Cancel LE pairing");
+        if (SMP_PairCancel(bd_addr))
+        {
+            return BTM_CMD_STARTED;
+        }
+        else
+        {
+            return BTM_WRONG_MODE;
+        }
+    }
+
+#endif
+    BTM_TRACE_DEBUG2 ("hci_handle:0x%x sec_state:%d", p_dev_rec->hci_handle, p_dev_rec->sec_state );
+    if (BTM_PAIR_STATE_WAIT_LOCAL_PIN == btm_cb.pairing_state &&
+        BTM_PAIR_FLAGS_WE_STARTED_DD & btm_cb.pairing_flags)
+    {
+        /* pre-fetching pin for dedicated bonding */
+        btm_sec_bond_cancel_complete();
+        return BTM_SUCCESS;
+    }
+
+    /* If this BDA is in a bonding procedure */
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         &&  (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD))
+    {
+        /* If the HCI link is up */
+        if (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)
+        {
+            /* If some other thread disconnecting, we do not send second command */
+            if (p_dev_rec->sec_state == BTM_SEC_STATE_DISCONNECTING)
+                return(BTM_CMD_STARTED);
+
+            /* If the HCI link was set up by Bonding process */
+            if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE)
+                return btm_sec_send_hci_disconnect(p_dev_rec, HCI_ERR_PEER_USER);
+            else
+                l2cu_update_lcb_4_bonding(bd_addr, FALSE);
+
+            return BTM_NOT_AUTHORIZED;
+        }
+        else /*HCI link is not up */
+        {
+            /* If the HCI link creation was started by Bonding process */
+            if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE)
+            {
+                if (btsnd_hcic_create_conn_cancel(bd_addr))
+                    return BTM_CMD_STARTED;
+
+                return BTM_NO_RESOURCES;
+            }
+
+            return BTM_NOT_AUTHORIZED;
+        }
+    }
+
+    return BTM_WRONG_MODE;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecUseMasterLinkKey
+**
+** Description      This function is called to tell master of the piconet to
+**                  switch to master link key
+**
+** Parameters:      use_master_key - If true Master Link Key shoul be used
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SecUseMasterLinkKey (BOOLEAN use_master_key)
+{
+    return(btsnd_hcic_master_link_key (use_master_key) ?  BTM_SUCCESS :
+           BTM_NO_RESOURCES);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SetMasterKeyCompCback
+**
+** Description      This function is called to register for the master key complete
+**                  status event.
+**
+** Parameters:      mkey_cback - callback registered with the security manager
+**
+*******************************************************************************/
+void BTM_SetMasterKeyCompCback( tBTM_MKEY_CALLBACK *mkey_cback )
+{
+    btm_cb.mkey_cback = mkey_cback;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_SecGetDeviceLinkKey
+**
+** Description      This function is called to obtain link key for the device
+**                  it returns BTM_SUCCESS if link key is available, or
+**                  BTM_UNKNOWN_ADDR if Security Manager does not know about
+**                  the device or device record does not contain link key info
+**
+** Parameters:      bd_addr      - Address of the device
+**                  link_key     - Link Key is copied into this array
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SecGetDeviceLinkKey (BD_ADDR bd_addr, LINK_KEY link_key)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if (((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+        && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN))
+    {
+        memcpy (link_key, p_dev_rec->link_key, LINK_KEY_LEN);
+        return(BTM_SUCCESS);
+    }
+    return(BTM_UNKNOWN_ADDR);
+}
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetEncryption
+**
+** Description      This function is called to ensure that connection is
+**                  encrypted.  Should be called only on an open connection.
+**                  Typically only needed for connections that first want to
+**                  bring up unencrypted links, then later encrypt them.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  p_callback    - Pointer to callback function called if
+**                                  this function returns PENDING after required
+**                                  procedures are completed.  Can be set to NULL
+**                                  if status is not desired.
+**                  p_ref_data    - pointer to any data the caller wishes to receive
+**                                  in the callback function upon completion.
+*                                   can be set to NULL if not used.
+**
+** Returns          BTM_SUCCESS   - already encrypted
+**                  BTM_PENDING   - command will be returned in the callback
+**                  BTM_WRONG_MODE- connection not up.
+**                  BTM_BUSY      - security procedures are currently active
+**                  BTM_MODE_UNSUPPORTED - if security manager not linked in.
+**
+*******************************************************************************/
+tBTM_STATUS BTM_SetEncryption (BD_ADDR bd_addr, tBTM_SEC_CBACK *p_callback,
+                               void *p_ref_data)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    tBTM_STATUS       rc;
+
+#if BLE_INCLUDED == TRUE
+    tACL_CONN         *p;
+    p = btm_bda_to_acl(bd_addr);
+#endif
+
+    p_dev_rec = btm_find_dev (bd_addr);
+    if (!p_dev_rec || (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE))
+    {
+        /* Connection should be up and runnning */
+        BTM_TRACE_WARNING0 ("Security Manager: BTM_SetEncryption not connected");
+
+        if (p_callback)
+            (*p_callback) (bd_addr, p_ref_data, BTM_WRONG_MODE);
+
+        return(BTM_WRONG_MODE);
+    }
+
+
+    if (
+#if BLE_INCLUDED == TRUE
+       !p->is_le_link &&
+#endif
+       (p_dev_rec->sec_flags & (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED))
+       == (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED))
+    {
+        BTM_TRACE_EVENT0 ("Security Manager: BTM_SetEncryption already encrypted");
+
+        if (p_callback)
+            (*p_callback) (bd_addr, p_ref_data, BTM_SUCCESS);
+
+        return(BTM_SUCCESS);
+    }
+
+    if (p_dev_rec->p_callback)
+    {
+        /* Connection should be up and runnning */
+        BTM_TRACE_WARNING0 ("Security Manager: BTM_SetEncryption busy");
+
+        if (p_callback)
+            (*p_callback) (bd_addr, p_ref_data, BTM_BUSY);
+
+        return(BTM_BUSY);
+    }
+
+    p_dev_rec->p_callback        = p_callback;
+    p_dev_rec->p_ref_data        = p_ref_data;
+    p_dev_rec->security_required |= (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT);
+    p_dev_rec->is_originator     = FALSE;
+
+    BTM_TRACE_API4 ("Security Manager: BTM_SetEncryption Handle:%d State:%d Flags:0x%x Required:0x%x",
+                    p_dev_rec->hci_handle, p_dev_rec->sec_state, p_dev_rec->sec_flags,
+                    p_dev_rec->security_required);
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+    if (p->is_le_link)
+    {
+        rc = btm_ble_set_encryption(bd_addr, p_ref_data, p->link_role);
+    }
+    else
+#endif
+
+        rc = btm_sec_execute_procedure (p_dev_rec);
+
+    if ( rc != BTM_CMD_STARTED)
+    {
+        if (p_callback)
+        {
+            p_dev_rec->p_callback = NULL;
+            (*p_callback) (bd_addr, p_dev_rec->p_ref_data, rc);
+        }
+    }
+    return(rc);
+}
+
+/*******************************************************************************
+ * disconnect the ACL link, if it's not done yet.
+*******************************************************************************/
+static tBTM_STATUS btm_sec_send_hci_disconnect (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 reason)
+{
+    UINT8 old_state = p_dev_rec->sec_state;
+
+    BTM_TRACE_EVENT2 ("btm_sec_send_hci_disconnect:  handle:0x%x, reason=0x%x",
+                      p_dev_rec->hci_handle, reason);
+
+    /* if some other thread disconnecting, we do not send second command */
+    if (BTM_SEC_STATE_DISCONNECTING != old_state)
+    {
+        p_dev_rec->sec_state = BTM_SEC_STATE_DISCONNECTING;
+
+#if BTM_DISC_DURING_RS == TRUE
+        /* If a Role Switch is in progress, delay the HCI Disconnect to avoid controller problem (4329B1) */
+        if (p_dev_rec->rs_disc_pending == BTM_SEC_RS_PENDING)
+        {
+                 BTM_TRACE_ERROR0("RS in progress - Set DISC Pending flag in btm_sec_send_hci_disconnect to delay disconnect");
+                 p_dev_rec->rs_disc_pending = BTM_SEC_DISC_PENDING;
+                 return BTM_SUCCESS;
+        }
+#endif
+        /* Tear down the HCI link */
+        if (!btsnd_hcic_disconnect (p_dev_rec->hci_handle, reason))
+        {
+            /* could not send disconnect. restore old state */
+            p_dev_rec->sec_state = old_state;
+            return(BTM_NO_RESOURCES);
+        }
+    }
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ConfirmReqReply
+**
+** Description      This function is called to confirm the numeric value for
+**                  Simple Pairing in response to BTM_SP_CFM_REQ_EVT
+**
+** Parameters:      res           - result of the operation BTM_SUCCESS if success
+**                  bd_addr       - Address of the peer device
+**
+*******************************************************************************/
+void BTM_ConfirmReqReply(tBTM_STATUS res, BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_EVENT2 ("BTM_ConfirmReqReply() State: %s  Res: %u",
+                      btm_pair_state_descr(btm_cb.pairing_state), res);
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM)
+         ||  (memcmp (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN) != 0) )
+        return;
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+
+    if ( (res == BTM_SUCCESS) || (res == BTM_SUCCESS_NO_SECURITY) )
+    {
+        btm_cb.acl_disc_reason = HCI_SUCCESS;
+
+        if (res == BTM_SUCCESS)
+        {
+            if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+                p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_AUTHED;
+        }
+
+        btsnd_hcic_user_conf_reply (bd_addr, TRUE);
+    }
+    else
+    {
+        /* Report authentication failed event from state BTM_PAIR_STATE_WAIT_AUTH_COMPLETE */
+        btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+        btsnd_hcic_user_conf_reply (bd_addr, FALSE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTM_PasskeyReqReply
+**
+** Description      This function is called to provide the passkey for
+**                  Simple Pairing in response to BTM_SP_KEY_REQ_EVT
+**
+** Parameters:      res     - result of the operation BTM_SUCCESS if success
+**                  bd_addr - Address of the peer device
+**                  passkey - numeric value in the range of
+**                  BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
+**
+*******************************************************************************/
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, UINT32 passkey)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    BTM_TRACE_API2 ("BTM_PasskeyReqReply: State: %s  res:%d",
+                    btm_pair_state_descr(btm_cb.pairing_state), res);
+
+    if ( (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE)
+         ||  (memcmp (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN) != 0) )
+    {
+        return;
+    }
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if ( (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_AUTH_COMPLETE) && (res != BTM_SUCCESS) )
+    {
+        if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+        {
+            btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+
+            if (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE)
+                btm_sec_send_hci_disconnect (p_dev_rec, HCI_ERR_AUTH_FAILURE);
+            else
+                BTM_SecBondCancel(bd_addr);
+
+            p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_AUTHED | BTM_SEC_LINK_KEY_KNOWN);
+
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            return;
+        }
+    }
+    else if (btm_cb.pairing_state != BTM_PAIR_STATE_KEY_ENTRY)
+        return;
+
+    if (passkey > BTM_MAX_PASSKEY_VAL)
+        res = BTM_ILLEGAL_VALUE;
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+
+    if (res != BTM_SUCCESS)
+    {
+        /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed event */
+        btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+        btsnd_hcic_user_passkey_neg_reply (bd_addr);
+    }
+    else
+    {
+        btm_cb.acl_disc_reason = HCI_SUCCESS;
+        btsnd_hcic_user_passkey_reply (bd_addr, passkey);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_SendKeypressNotif
+**
+** Description      This function is used during the passkey entry model
+**                  by a device with KeyboardOnly IO capabilities
+**                  (very likely to be a HID Device).
+**                  It is called by a HID Device to inform the remote device when
+**                  a key has been entered or erased.
+**
+** Parameters:      bd_addr - Address of the peer device
+**                  type - notification type
+**
+*******************************************************************************/
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+void BTM_SendKeypressNotif(BD_ADDR bd_addr, tBTM_SP_KEY_TYPE type)
+{
+    /* This API only make sense between PASSKEY_REQ and SP complete */
+    if (btm_cb.pairing_state == BTM_PAIR_STATE_KEY_ENTRY)
+        btsnd_hcic_send_keypress_notif (bd_addr, type);
+}
+#endif
+
+#if BTM_OOB_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function         BTM_IoCapRsp
+**
+** Description      This function is called in response to BTM_SP_IO_REQ_EVT
+**                  When the event data io_req.oob_data is set to BTM_OOB_UNKNOWN
+**                  by the tBTM_SP_CALLBACK implementation, this function is
+**                  called to provide the actual response
+**
+** Parameters:      bd_addr - Address of the peer device
+**                  io_cap  - The IO capability of local device.
+**                  oob     - BTM_OOB_NONE or BTM_OOB_PRESENT.
+**                  auth_req- MITM protection required or not.
+**
+*******************************************************************************/
+void BTM_IoCapRsp(BD_ADDR bd_addr, tBTM_IO_CAP io_cap, tBTM_OOB_DATA oob, tBTM_AUTH_REQ auth_req)
+{
+    BTM_TRACE_EVENT3 ("BTM_IoCapRsp: state: %s  oob: %d io_cap: %d",
+                      btm_pair_state_descr(btm_cb.pairing_state), oob, io_cap);
+
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS)
+         ||  (memcmp (btm_cb.pairing_bda, bd_addr, BD_ADDR_LEN) != 0) )
+        return;
+
+    if (oob < BTM_OOB_UNKNOWN && io_cap < BTM_IO_CAP_MAX)
+    {
+        btm_cb.devcb.loc_auth_req   = auth_req;
+        btm_cb.devcb.loc_io_caps    = io_cap;
+
+        if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+            auth_req = (BTM_AUTH_DD_BOND | (auth_req&BTM_AUTH_YN_BIT));
+
+        btsnd_hcic_io_cap_req_reply (bd_addr, io_cap, oob, auth_req);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalOobData
+**
+** Description      This function is called to read the local OOB data from
+**                  LM
+**
+*******************************************************************************/
+tBTM_STATUS BTM_ReadLocalOobData(void)
+{
+    tBTM_STATUS status = BTM_SUCCESS;
+
+    if (btsnd_hcic_read_local_oob_data() == FALSE)
+        status = BTM_NO_RESOURCES;
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_RemoteOobDataReply
+**
+** Description      This function is called to provide the remote OOB data for
+**                  Simple Pairing in response to BTM_SP_RMT_OOB_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  c           - simple pairing Hash C.
+**                  r           - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+void BTM_RemoteOobDataReply(tBTM_STATUS res, BD_ADDR bd_addr, BT_OCTET16 c, BT_OCTET16 r)
+{
+    BTM_TRACE_EVENT2 ("BTM_RemoteOobDataReply():  State: %s  res:%d",
+                      btm_pair_state_descr(btm_cb.pairing_state), res);
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP)
+        return;
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+
+    if (res != BTM_SUCCESS)
+    {
+        /* use BTM_PAIR_STATE_WAIT_AUTH_COMPLETE to report authentication failed event */
+        btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+        btsnd_hcic_rem_oob_neg_reply (bd_addr);
+    }
+    else
+    {
+        btm_cb.acl_disc_reason = HCI_SUCCESS;
+        btsnd_hcic_rem_oob_reply (bd_addr, c, r);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         BTM_BuildOobData
+**
+** Description      This function is called to build the OOB data payload to
+**                  be sent over OOB (non-Bluetooth) link
+**
+** Parameters:      p_data  - the location for OOB data
+**                  max_len - p_data size.
+**                  c       - simple pairing Hash C.
+**                  r       - simple pairing Randomizer  C.
+**                  name_len- 0, local device name would not be included.
+**                            otherwise, the local device name is included for
+**                            up to this specified length
+**
+** Returns          Number of bytes in p_data.
+**
+*******************************************************************************/
+UINT16 BTM_BuildOobData(UINT8 *p_data, UINT16 max_len, BT_OCTET16 c,
+                        BT_OCTET16 r, UINT8 name_len)
+{
+    UINT8   *p = p_data;
+    UINT16  len = 0;
+    UINT16  delta;
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+    UINT16  name_size;
+    UINT8   name_type = BTM_EIR_SHORTENED_LOCAL_NAME_TYPE;
+#endif
+
+    if (p_data && max_len >= BTM_OOB_MANDATORY_SIZE)
+    {
+        /* add mandatory part */
+        UINT16_TO_STREAM(p, len);
+        BDADDR_TO_STREAM(p, btm_cb.devcb.local_addr);
+
+        len = BTM_OOB_MANDATORY_SIZE;
+        max_len -= len;
+
+        /* now optional part */
+
+        /* add Hash C */
+        delta = BTM_OOB_HASH_C_SIZE + 2;
+        if (max_len >= delta)
+        {
+            *p++ = BTM_OOB_HASH_C_SIZE + 1;
+            *p++ = BTM_EIR_OOB_SSP_HASH_C_TYPE;
+            ARRAY_TO_STREAM(p, c, BTM_OOB_HASH_C_SIZE);
+            len     += delta;
+            max_len -= delta;
+        }
+
+        /* add Rand R */
+        delta = BTM_OOB_RAND_R_SIZE + 2;
+        if (max_len >= delta)
+        {
+            *p++ = BTM_OOB_RAND_R_SIZE + 1;
+            *p++ = BTM_EIR_OOB_SSP_RAND_R_TYPE;
+            ARRAY_TO_STREAM(p, r, BTM_OOB_RAND_R_SIZE);
+            len     += delta;
+            max_len -= delta;
+        }
+
+        /* add class of device */
+        delta = BTM_OOB_COD_SIZE + 2;
+        if (max_len >= delta)
+        {
+            *p++ = BTM_OOB_COD_SIZE + 1;
+            *p++ = BTM_EIR_OOB_COD_TYPE;
+            DEVCLASS_TO_STREAM(p, btm_cb.devcb.dev_class);
+            len     += delta;
+            max_len -= delta;
+        }
+#if BTM_MAX_LOC_BD_NAME_LEN > 0
+        name_size = name_len;
+        if (name_size > strlen(btm_cb.cfg.bd_name))
+        {
+            name_type = BTM_EIR_COMPLETE_LOCAL_NAME_TYPE;
+            name_size = (UINT16)strlen(btm_cb.cfg.bd_name);
+        }
+        delta = name_size + 2;
+        if (max_len >= delta)
+        {
+            *p++ = name_size + 1;
+            *p++ = name_type;
+            ARRAY_TO_STREAM (p, btm_cb.cfg.bd_name, name_size);
+            len     += delta;
+            max_len -= delta;
+        }
+#endif
+        /* update len */
+        p = p_data;
+        UINT16_TO_STREAM(p, len);
+    }
+    return len;
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadOobData
+**
+** Description      This function is called to parse the OOB data payload
+**                  received over OOB (non-Bluetooth) link
+**
+** Parameters:      p_data  - the location for OOB data
+**                  eir_tag - The associated EIR tag to read the data.
+**                  *p_len(output) - the length of the data with the given tag.
+**
+** Returns          the beginning of the data with the given tag.
+**                  NULL, if the tag is not found.
+**
+*******************************************************************************/
+UINT8 * BTM_ReadOobData(UINT8 *p_data, UINT8 eir_tag, UINT8 *p_len)
+{
+    UINT8   *p = p_data;
+    UINT16  max_len;
+    UINT8   len, type;
+    UINT8   *p_ret = NULL;
+    UINT8   ret_len = 0;
+
+    if (p_data)
+    {
+        STREAM_TO_UINT16(max_len, p);
+        if (max_len >= BTM_OOB_MANDATORY_SIZE)
+        {
+            if (BTM_EIR_OOB_BD_ADDR_TYPE == eir_tag)
+            {
+                p_ret = p; /* the location for bd_addr */
+                ret_len = BTM_OOB_BD_ADDR_SIZE;
+            }
+            else
+            {
+                p += BD_ADDR_LEN;
+                max_len -= BTM_OOB_MANDATORY_SIZE;
+                /* now the optional data in EIR format */
+                while (max_len > 0)
+                {
+                    len     = *p++; /* tag data len + 1 */
+                    type    = *p++;
+                    if (eir_tag == type)
+                    {
+                        p_ret = p;
+                        ret_len = len - 1;
+                        break;
+                    }
+                    /* the data size of this tag is len + 1 (tag data len + 2) */
+                    if (max_len > len)
+                    {
+                        max_len -= len;
+                        max_len--;
+                        len--;
+                        p += len;
+                    }
+                    else
+                        max_len = 0;
+                }
+            }
+        }
+    }
+
+    if (p_len)
+        *p_len = ret_len;
+
+    return p_ret;
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         BTM_SetOutService
+**
+** Description      This function is called to set the service for
+**                  outgoing connections.
+**
+**                  If the profile/application calls BTM_SetSecurityLevel
+**                  before initiating a connection, this function does not
+**                  need to be called.
+**
+** Returns          void
+**
+*******************************************************************************/
+void BTM_SetOutService(BD_ADDR bd_addr, UINT8 service_id, UINT32 mx_chan_id)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    tBTM_SEC_SERV_REC *p_serv_rec = &btm_cb.sec_serv_rec[0];
+    int i;
+
+    btm_cb.p_out_serv = p_serv_rec;
+    p_dev_rec = btm_find_dev (bd_addr);
+
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++)
+    {
+        if ((p_serv_rec->security_flags & BTM_SEC_IN_USE)
+            && (p_serv_rec->service_id == service_id)
+            && (p_serv_rec->orig_mx_chan_id == mx_chan_id))
+        {
+            BTM_TRACE_API4("BTM_SetOutService p_out_serv id %d, psm 0x%04x, proto_id %d, chan_id %d",
+                           p_serv_rec->service_id, p_serv_rec->psm, p_serv_rec->mx_proto_id, p_serv_rec->orig_mx_chan_id);
+            btm_cb.p_out_serv = p_serv_rec;
+            if (p_dev_rec)
+                p_dev_rec->p_cur_service = p_serv_rec;
+            break;
+        }
+    }
+}
+
+/************************************************************************
+**              I N T E R N A L     F U N C T I O N S
+*************************************************************************/
+/*******************************************************************************
+**
+** Function         btm_sec_check_upgrade
+**
+** Description      This function is called to check if the existing link key
+**                  needs to be upgraded.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_sec_check_upgrade(tBTM_SEC_DEV_REC  *p_dev_rec, BOOLEAN is_originator)
+{
+    tBTM_SP_UPGRADE     evt_data;
+    UINT16              mtm_check = is_originator ? BTM_SEC_OUT_MITM : BTM_SEC_IN_MITM;
+
+    if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)
+    {
+
+        BTM_TRACE_DEBUG5 ("btm_sec_check_upgrade id:%d, link_key_typet:%d, rmt_io_caps:%d, chk flags:x%x, flags:x%x",
+                          p_dev_rec->p_cur_service->service_id, p_dev_rec->link_key_type, p_dev_rec->rmt_io_caps,
+                          mtm_check, p_dev_rec->p_cur_service->security_flags);
+        /* Already have a link key to the connected peer. Is the link key secure enough?
+        ** Is a link key upgrade even possible?
+        */
+        if ((p_dev_rec->security_required & mtm_check)                          /* needs MITM */
+            && (p_dev_rec->link_key_type == BTM_LKEY_TYPE_UNAUTH_COMB) /* has unauthenticated link key */
+            && (p_dev_rec->rmt_io_caps < BTM_IO_CAP_MAX)                           /* a valid peer IO cap */
+            && (btm_sec_io_map[p_dev_rec->rmt_io_caps][btm_cb.devcb.loc_io_caps])) /* authenticated link key is possible */
+        {
+            BTM_TRACE_DEBUG1 ("need upgrade!! sec_flags:0x%x", p_dev_rec->sec_flags);
+            /* upgrade is possible: check if the application wants the upgrade.
+             * If the application is configured to use a global MITM flag,
+             * it probably would not want to upgrade the link key based on the security level database */
+            memcpy (evt_data.bd_addr, p_dev_rec->bd_addr, BD_ADDR_LEN);
+            evt_data.upgrade = TRUE;
+            if (btm_cb.api.p_sp_callback)
+                (*btm_cb.api.p_sp_callback) (BTM_SP_UPGRADE_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+
+            BTM_TRACE_DEBUG1 ("evt_data.upgrade:0x%x", evt_data.upgrade);
+            if (evt_data.upgrade)
+            {
+                /* if the application confirms the upgrade, set the upgrade bit */
+                p_dev_rec->sm4 |= BTM_SM4_UPGRADE;
+
+                /* Clear the link key known to go through authentication/pairing again */
+                p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED);
+                p_dev_rec->sec_flags &= ~BTM_SEC_AUTHENTICATED;
+                BTM_TRACE_DEBUG1 ("sec_flags:0x%x", p_dev_rec->sec_flags);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_l2cap_access_req
+**
+** Description      This function is called by the L2CAP to grant permission to
+**                  establish L2CAP connection to or from the peer device.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  psm           - L2CAP PSM
+**                  is_originator - TRUE if protocol above L2CAP originates
+**                                  connection
+**                  p_callback    - Pointer to callback function called if
+**                                  this function returns PENDING after required
+**                                  procedures are complete. MUST NOT BE NULL.
+**
+** Returns          tBTM_STATUS
+**
+*******************************************************************************/
+#define BTM_SEC_OUT_FLAGS   (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT | BTM_SEC_OUT_AUTHORIZE)
+#define BTM_SEC_IN_FLAGS    (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT | BTM_SEC_IN_AUTHORIZE)
+
+tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, UINT16 handle,
+                                      CONNECTION_TYPE conn_type,
+                                      tBTM_SEC_CALLBACK *p_callback,
+                                      void *p_ref_data)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    tBTM_SEC_SERV_REC *p_serv_rec;
+    UINT16         security_required;
+    UINT16         old_security_required;
+    BOOLEAN       old_is_originator;
+    tBTM_STATUS   rc = BTM_SUCCESS;
+    BOOLEAN       chk_acp_auth_done = FALSE;
+    BOOLEAN is_originator;
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if (conn_type & CONNECTION_TYPE_ORIG_MASK)
+        is_originator = TRUE;
+    else
+        is_originator = FALSE;
+
+    BTM_TRACE_DEBUG2 ("btm_sec_l2cap_access_req conn_type:0x%x, 0x%x", conn_type, p_ref_data);
+#else
+    is_originator = conn_type;
+
+    BTM_TRACE_DEBUG2 ("btm_sec_l2cap_access_req is_originator:%d, 0x%x", is_originator, p_ref_data);
+#endif
+
+    /* Find or get oldest record */
+    p_dev_rec = btm_find_or_alloc_dev (bd_addr);
+
+    p_dev_rec->hci_handle = handle;
+
+    /* Find the service record for the PSM */
+    p_serv_rec = btm_sec_find_first_serv (conn_type, psm);
+
+    /* If there is no application registered with this PSM do not allow connection */
+    if (!p_serv_rec)
+    {
+        BTM_TRACE_WARNING1 ("btm_sec_l2cap_access_req()  PSM:%d no application registerd", psm);
+
+        (*p_callback) (bd_addr, p_ref_data, BTM_MODE_UNSUPPORTED);
+
+        return(BTM_MODE_UNSUPPORTED);
+    }
+
+    /* SDP connection we will always let through */
+    if (BT_PSM_SDP == psm)
+    {
+        (*p_callback) (bd_addr, p_ref_data, BTM_SUCCESS_NO_SECURITY);
+
+        return(BTM_SUCCESS);
+    }
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( conn_type & CONNECTION_TYPE_CONNLESS_MASK )
+    {
+        security_required = p_serv_rec->ucd_security_flags;
+
+        rc = BTM_CMD_STARTED;
+        if (is_originator)
+        {
+            if (((security_required & BTM_SEC_OUT_FLAGS) == 0) ||
+                ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_AUTHENTICATE) && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))) ||
+                ((((security_required & BTM_SEC_OUT_FLAGS) == (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT)) && (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED))) ||
+                ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_FLAGS) && (p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED))) )
+            {
+                rc = BTM_SUCCESS;
+            }
+        }
+        else
+        {
+            if (((security_required & BTM_SEC_IN_FLAGS) == 0) ||
+                ((((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHENTICATE) && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))) ||
+                ((((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)) && (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED))) ||
+                ((((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_FLAGS) && (p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED))) )
+            {
+                rc = BTM_SUCCESS;
+            }
+        }
+
+        if (rc == BTM_SUCCESS)
+        {
+            if (p_callback)
+                (*p_callback) (bd_addr, (void *)p_ref_data, BTM_SUCCESS);
+
+            return(BTM_SUCCESS);
+        }
+    }
+    else
+#endif
+    {
+        security_required = p_serv_rec->security_flags;
+    }
+
+    /* there are some devices (moto KRZR) which connects to several services at the same time */
+    /* we will process one after another */
+    if ( (p_dev_rec->p_callback) || (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) )
+    {
+        BTM_TRACE_EVENT2 ("btm_sec_l2cap_access_req() - busy - PSM:%d delayed  state: %s",
+                          psm, btm_pair_state_descr(btm_cb.pairing_state));
+        rc = BTM_CMD_STARTED;
+        if ((BTM_SEC_MODE_SP != btm_cb.security_mode)
+            || ((BTM_SEC_MODE_SP == btm_cb.security_mode) && (BTM_SM4_KNOWN == p_dev_rec->sm4))
+           )
+        {
+            BTM_TRACE_EVENT2 ("security_flags:x%x, sec_flags:x%x", security_required, p_dev_rec->sec_flags);
+            /* legacy mode - local is legacy or local is lisbon/peer is legacy */
+            if (is_originator)
+            {
+                if (((security_required & BTM_SEC_OUT_FLAGS) == 0) ||
+                    ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_AUTHENTICATE) && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))) ||
+                    ((((security_required & BTM_SEC_OUT_FLAGS) == (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT)) && (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED))) ||
+                    ((((security_required & BTM_SEC_OUT_FLAGS) == BTM_SEC_OUT_FLAGS) && (p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED))) )
+                {
+                    rc = BTM_SUCCESS;
+                }
+            }
+            else
+            {
+                if (((security_required & BTM_SEC_IN_FLAGS) == 0) ||
+                    ((((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_AUTHENTICATE) && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))) ||
+                    ((((security_required & BTM_SEC_IN_FLAGS) == (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT)) && (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED))) ||
+                    ((((security_required & BTM_SEC_IN_FLAGS) == BTM_SEC_IN_FLAGS) && (p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED))) )
+                {
+                    rc = BTM_SUCCESS;
+                }
+            }
+
+            if (rc == BTM_SUCCESS)
+            {
+                if (p_callback)
+                    (*p_callback) (bd_addr, (void *)p_ref_data, BTM_SUCCESS);
+
+                return(BTM_SUCCESS);
+            }
+        }
+
+        btm_cb.sec_req_pending = TRUE;
+        return(BTM_CMD_STARTED);
+    }
+
+    /* Save pointer to service record */
+    p_dev_rec->p_cur_service = p_serv_rec;
+
+
+    /* mess /w security_required in btm_sec_l2cap_access_req for Lisbon */
+    if (btm_cb.security_mode == BTM_SEC_MODE_SP)
+    {
+        if (is_originator)
+        {
+            if (BTM_SEC_IS_SM4(p_dev_rec->sm4))
+            {
+                /* SM4 to SM4 -> always authenticate & encrypt */
+                security_required |= (BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT);
+            }
+            else
+            {
+                if ( !(BTM_SM4_KNOWN & p_dev_rec->sm4))
+                {
+                    BTM_TRACE_DEBUG1 ("remote features unknown!!sec_flags:0x%x", p_dev_rec->sec_flags);
+                    /* the remote features are not known yet */
+                    p_dev_rec->sm4          |= BTM_SM4_REQ_PEND;
+
+                    return(BTM_CMD_STARTED);
+                }
+            }
+        }
+        else
+        {
+            /* responder */
+            if (BTM_SEC_IS_SM4(p_dev_rec->sm4))
+            {
+                /* SM4 to SM4: the acceptor needs to make sure the authentication is already done */
+                chk_acp_auth_done = TRUE;
+                /* SM4 to SM4 -> always authenticate & encrypt */
+                security_required |= (BTM_SEC_IN_AUTHENTICATE | BTM_SEC_IN_ENCRYPT);
+            }
+            else
+            {
+                if ( !(BTM_SM4_KNOWN & p_dev_rec->sm4))
+                {
+                    BTM_TRACE_DEBUG1 ("(rsp) remote features unknown!!sec_flags:0x%x", p_dev_rec->sec_flags);
+                    /* the remote features are not known yet */
+                    p_dev_rec->sm4          |= BTM_SM4_REQ_PEND;
+
+                    return(BTM_CMD_STARTED);
+                }
+            }
+        }
+    }
+
+    BTM_TRACE_DEBUG4 ("btm_sec_l2cap_access_req()  sm4:0x%x, sec_flags:0x%x, security_required:0x%x chk:%d",
+                      p_dev_rec->sm4, p_dev_rec->sec_flags, security_required, chk_acp_auth_done);
+
+    old_security_required        = p_dev_rec->security_required;
+    old_is_originator            = p_dev_rec->is_originator;
+    p_dev_rec->security_required = security_required;
+    p_dev_rec->p_ref_data        = p_ref_data;
+    p_dev_rec->is_originator     = is_originator;
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( conn_type & CONNECTION_TYPE_CONNLESS_MASK )
+        p_dev_rec->is_ucd = TRUE;
+    else
+        p_dev_rec->is_ucd = FALSE;
+#endif
+
+    /* If there are multiple service records used through the same PSM */
+    /* leave security decision for the multiplexor on the top */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if (((btm_sec_find_next_serv (p_serv_rec)) != NULL)
+        &&(!( conn_type & CONNECTION_TYPE_CONNLESS_MASK ))) /* if not UCD */
+#else
+    if ((btm_sec_find_next_serv (p_serv_rec)) != NULL)
+#endif
+    {
+        BTM_TRACE_DEBUG2 ("no next_serv sm4:0x%x, chk:%d", p_dev_rec->sm4, chk_acp_auth_done);
+        if (!BTM_SEC_IS_SM4(p_dev_rec->sm4))
+        {
+            BTM_TRACE_EVENT1 ("Security Manager: l2cap_access_req PSM:%d postponed for multiplexer", psm);
+            /* pre-Lisbon: restore the old settings */
+            p_dev_rec->security_required = old_security_required;
+            p_dev_rec->is_originator     = old_is_originator;
+
+            (*p_callback) (bd_addr, p_ref_data, BTM_SUCCESS);
+
+            return(BTM_SUCCESS);
+        }
+    }
+
+    /* if the originator is using dynamic PSM in legacy mode, do not start any security process now.
+     * The layer above L2CAP needs to carry out the security requirement after L2CAP connect response is received*/
+    if (is_originator && (btm_cb.security_mode != BTM_SEC_MODE_SP || !BTM_SEC_IS_SM4(p_dev_rec->sm4)) && (psm >= 0x1001))
+    {
+        BTM_TRACE_EVENT1 ("dynamic PSM:0x%x in legacy mode - postponed for upper layer", psm);
+        /* restore the old settings */
+        p_dev_rec->security_required = old_security_required;
+        p_dev_rec->is_originator     = old_is_originator;
+
+        (*p_callback) (bd_addr, p_ref_data, BTM_SUCCESS);
+
+        return(BTM_SUCCESS);
+    }
+
+    if (chk_acp_auth_done)
+    {
+        BTM_TRACE_DEBUG2 ("(SM4 to SM4) btm_sec_l2cap_access_req rspd. authenticated: x%x, enc: x%x",
+                          (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED), (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED));
+        /* SM4, but we do not know for sure which level of security we need.
+         * as long as we have a link key, it's OK */
+        if ((0 == (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))
+            ||(0 == (p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)))
+        {
+            rc = BTM_DELAY_CHECK;
+            /*
+            2046 may report HCI_Encryption_Change and L2C Connection Request out of sequence
+            because of data path issues. Delay this disconnect a little bit
+            */
+            BTM_TRACE_ERROR0 ("peer should have initiated security process by now (SM4 to SM4)");
+            p_dev_rec->p_callback        = p_callback;
+            p_dev_rec->sec_state         = BTM_SEC_STATE_DELAY_FOR_ENC;
+            (*p_callback) (bd_addr, p_ref_data, rc);
+
+            return(BTM_SUCCESS);
+        }
+    }
+
+    p_dev_rec->p_callback        = p_callback;
+
+    /* Although authentication and encryption are per connection */
+    /* authorization is per access request.  For example when serial connection */
+    /* is up and authorized and client requests to read file (access to other */
+    /* scn, we need to request user's permission again. */
+    p_dev_rec->sec_flags &= ~BTM_SEC_AUTHORIZED;
+
+    if (BTM_SEC_IS_SM4(p_dev_rec->sm4))
+    {
+        /* If we already have a link key to the connected peer, is the link key secure enough ? */
+        btm_sec_check_upgrade(p_dev_rec, is_originator);
+    }
+
+    BTM_TRACE_EVENT6 ("Security Manager: l2cap_access_req PSM:%d Handle:%d State:%d Flags:0x%x Required:0x%x Service ID:%d",
+                      psm, handle, p_dev_rec->sec_state, p_dev_rec->sec_flags, p_dev_rec->security_required, p_dev_rec->p_cur_service->service_id);
+
+    if ((rc = btm_sec_execute_procedure (p_dev_rec)) != BTM_CMD_STARTED)
+    {
+        p_dev_rec->p_callback = NULL;
+        (*p_callback) (bd_addr, p_dev_rec->p_ref_data, (UINT8)rc);
+    }
+
+    return(rc);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_mx_access_request
+**
+** Description      This function is called by all Multiplexing Protocols during
+**                  establishing connection to or from peer device to grant
+**                  permission to establish application connection.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  psm           - L2CAP PSM
+**                  is_originator - TRUE if protocol above L2CAP originates
+**                                  connection
+**                  mx_proto_id   - protocol ID of the multiplexer
+**                  mx_chan_id    - multiplexer channel to reach application
+**                  p_callback    - Pointer to callback function called if
+**                                  this function returns PENDING after required
+**                                  procedures are completed
+**                  p_ref_data    - Pointer to any reference data needed by the
+**                                  the callback function.
+**
+** Returns          BTM_CMD_STARTED
+**
+*******************************************************************************/
+tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator,
+                                       UINT32 mx_proto_id, UINT32 mx_chan_id,
+                                       tBTM_SEC_CALLBACK *p_callback, void *p_ref_data)
+
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    tBTM_SEC_SERV_REC *p_serv_rec;
+    tBTM_STATUS        rc;
+
+    BTM_TRACE_DEBUG1 ("btm_sec_mx_access_request is_originator:%d", is_originator);
+    /* Find or get oldest record */
+    p_dev_rec = btm_find_or_alloc_dev (bd_addr);
+
+    /* Find the service record for the PSM */
+    p_serv_rec = btm_sec_find_mx_serv (is_originator, psm, mx_proto_id, mx_chan_id);
+
+    /* If there is no application registered with this PSM do not allow connection */
+    if (!p_serv_rec)
+    {
+        if (p_callback)
+            (*p_callback) (bd_addr, p_ref_data, BTM_MODE_UNSUPPORTED);
+
+        BTM_TRACE_ERROR3 ("Security Manager: MX service not found PSM:%d Proto:%d SCN:%d",
+                          psm, mx_proto_id, mx_chan_id);
+        return BTM_NO_RESOURCES;
+    }
+
+    /* there are some devices (moto phone) which connects to several services at the same time */
+    /* we will process one after another */
+    if ( (p_dev_rec->p_callback) || (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE) )
+    {
+        BTM_TRACE_EVENT4 ("btm_sec_mx_access_request service PSM:%d Proto:%d SCN:%d delayed  state: %s",
+                          psm, mx_proto_id, mx_chan_id, btm_pair_state_descr(btm_cb.pairing_state));
+
+        btm_sec_queue_mx_request (bd_addr, psm,  is_originator, mx_proto_id, mx_chan_id, p_callback, p_ref_data);
+        return BTM_CMD_STARTED;
+    }
+
+    p_dev_rec->p_cur_service     = p_serv_rec;
+    p_dev_rec->security_required = p_serv_rec->security_flags;
+
+    if (BTM_SEC_MODE_SP == btm_cb.security_mode)
+    {
+        if (BTM_SEC_IS_SM4(p_dev_rec->sm4))
+        {
+            /* If we already have a link key, check if that link key is good enough */
+            btm_sec_check_upgrade(p_dev_rec, is_originator);
+        }
+    }
+
+    p_dev_rec->is_originator     = is_originator;
+    p_dev_rec->p_callback        = p_callback;
+    p_dev_rec->p_ref_data        = p_ref_data;
+
+    /* Although authentication and encryption are per connection */
+    /* authorization is per access request.  For example when serial connection */
+    /* is up and authorized and client requests to read file (access to other */
+    /* scn, we need to request user's permission again. */
+    p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED);
+
+    BTM_TRACE_EVENT6 ("Security Manager: mx_access_req proto_id:%d chan_id:%d State:%d Flags:0x%x Required:0x%x Service ID:%d",
+                      mx_proto_id, mx_chan_id, p_dev_rec->sec_state, p_dev_rec->sec_flags, p_dev_rec->security_required, p_dev_rec->p_cur_service->service_id);
+
+    if ((rc = btm_sec_execute_procedure (p_dev_rec)) != BTM_CMD_STARTED)
+    {
+        if (p_callback)
+        {
+            p_dev_rec->p_callback = NULL;
+
+            (*p_callback) (bd_addr, p_ref_data, (UINT8)rc);
+        }
+    }
+
+    return rc;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_conn_req
+**
+** Description      This function is when the peer device is requesting
+**                  connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_conn_req (UINT8 *bda, UINT8 *dc)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bda);
+
+    /* Some device may request a connection before we are done with the HCI_Reset sequence */
+    if (btm_cb.devcb.state != BTM_DEV_STATE_READY)
+    {
+        BTM_TRACE_EVENT0 ("Security Manager: connect request when device not ready");
+        btsnd_hcic_reject_conn (bda, HCI_ERR_HOST_REJECT_DEVICE);
+        return;
+    }
+
+    /* Security guys wants us not to allow connection from not paired devices */
+
+    /* Check if connection is allowed for only paired devices */
+    if (btm_cb.connect_only_paired)
+    {
+        if (!p_dev_rec || !(p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED))
+        {
+            BTM_TRACE_EVENT0 ("Security Manager: connect request from non-paired device");
+            btsnd_hcic_reject_conn (bda, HCI_ERR_HOST_REJECT_DEVICE);
+            return;
+        }
+    }
+
+#if BTM_ALLOW_CONN_IF_NONDISCOVER == FALSE
+    /* If non-discoverable, only allow known devices to connect */
+    if (btm_cb.btm_inq_vars.discoverable_mode == BTM_NON_DISCOVERABLE)
+    {
+        if (!p_dev_rec)
+        {
+            BTM_TRACE_EVENT0 ("Security Manager: connect request from not paired device");
+            btsnd_hcic_reject_conn (bda, HCI_ERR_HOST_REJECT_DEVICE);
+            return;
+        }
+    }
+#endif
+
+    /* Host can be registered to verify comming BDA or DC */
+    if (btm_cb.p_conn_filter_cb)
+    {
+        if (!(* btm_cb.p_conn_filter_cb) (bda, dc))
+        {
+            BTM_TRACE_EVENT0 ("Security Manager: connect request did not pass filter");
+
+            /* incomming call did not pass connection filters.  Reject */
+            btsnd_hcic_reject_conn (bda, HCI_ERR_HOST_REJECT_DEVICE);
+            return;
+        }
+    }
+
+    if ((btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+        &&(btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+        &&(!memcmp (btm_cb.pairing_bda, bda, BD_ADDR_LEN)))
+    {
+        BTM_TRACE_EVENT0 ("Security Manager: reject connect request from bonding device");
+
+        /* incoming connection from bonding device is rejected */
+        btm_cb.pairing_flags |= BTM_PAIR_FLAGS_REJECTED_CONNECT;
+        btsnd_hcic_reject_conn (bda, HCI_ERR_HOST_REJECT_DEVICE);
+        return;
+    }
+
+    /* Host is not interested or approved connection.  Save BDA and DC and */
+    /* pass request to L2CAP */
+    memcpy (btm_cb.connecting_bda, bda, BD_ADDR_LEN);
+    memcpy (btm_cb.connecting_dc,  dc,  DEV_CLASS_LEN);
+
+    if (l2c_link_hci_conn_req (bda))
+    {
+        if (!p_dev_rec)
+        {
+            /* accept the connection -> allocate a device record */
+            p_dev_rec = btm_sec_alloc_dev (bda);
+        }
+        if (p_dev_rec)
+        {
+            p_dev_rec->sm4 |= BTM_SM4_CONN_PEND;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_bond_cancel_complete
+**
+** Description      This function is called to report bond cancel complete
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_sec_bond_cancel_complete (void)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE) ||
+        (BTM_PAIR_STATE_WAIT_LOCAL_PIN == btm_cb.pairing_state &&
+         BTM_PAIR_FLAGS_WE_STARTED_DD & btm_cb.pairing_flags))
+    {
+        /* for dedicated bonding in legacy mode, authentication happens at "link level"
+         * btm_sec_connected is called with failed status.
+         * In theory, the code that handles is_pairing_device/TRUE should clean out security related code.
+         * However, this function may clean out the security related flags and btm_sec_connected would not know
+         * this function also needs to do proper clean up.
+         */
+        if ((p_dev_rec = btm_find_dev (btm_cb.pairing_bda)) != NULL)
+            p_dev_rec->security_required = BTM_SEC_NONE;
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+        /* Notify application that the cancel succeeded */
+        if (btm_cb.api.p_bond_cancel_cmpl_callback)
+            btm_cb.api.p_bond_cancel_cmpl_callback(BTM_SUCCESS);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_create_conn_cancel_complete
+**
+** Description      This function is called when the command complete message
+**                  is received from the HCI for the create connection cancel
+**                  command.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_create_conn_cancel_complete (UINT8 *p)
+{
+    UINT8       status;
+
+    STREAM_TO_UINT8 (status, p);
+    BTM_TRACE_EVENT2 ("btm_create_conn_cancel_complete(): in State: %s  status:%d",
+                      btm_pair_state_descr(btm_cb.pairing_state), status);
+
+    /* if the create conn cancel cmd was issued by the bond cancel,
+    ** the application needs to be notified that bond cancel succeeded
+    */
+    switch (status)
+    {
+        case HCI_SUCCESS:
+            btm_sec_bond_cancel_complete();
+            break;
+        case HCI_ERR_CONNECTION_EXISTS:
+        case HCI_ERR_NO_CONNECTION:
+        default:
+            /* Notify application of the error */
+            if (btm_cb.api.p_bond_cancel_cmpl_callback)
+                btm_cb.api.p_bond_cancel_cmpl_callback(BTM_ERR_PROCESSING);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_check_pending_reqs
+**
+** Description      This function is called at the end of the security procedure
+**                  to let L2CAP and RFCOMM know to re-submit any pending requests
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_check_pending_reqs (void)
+{
+    tBTM_SEC_QUEUE_ENTRY    *p_e;
+    BUFFER_Q                bq;
+
+    if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE)
+    {
+        /* First, resubmit L2CAP requests */
+        if (btm_cb.sec_req_pending)
+        {
+            btm_cb.sec_req_pending = FALSE;
+            l2cu_resubmit_pending_sec_req (NULL);
+        }
+
+        /* Now, re-submit anything in the mux queue */
+        bq = btm_cb.sec_pending_q;
+
+        GKI_init_q (&btm_cb.sec_pending_q);
+
+        while ((p_e = (tBTM_SEC_QUEUE_ENTRY *)GKI_dequeue (&bq)) != NULL)
+        {
+            /* Check that the ACL is still up before starting security procedures */
+            if (btm_bda_to_acl(p_e->bd_addr) != NULL)
+            {
+                BTM_TRACE_EVENT4 ("btm_sec_check_pending_reqs() submitting  PSM: 0x%04x  Is_Orig: %u  mx_proto_id: %u  mx_chan_id: %u",
+                                  p_e->psm, p_e->is_orig, p_e->mx_proto_id, p_e->mx_chan_id);
+
+                btm_sec_mx_access_request (p_e->bd_addr, p_e->psm, p_e->is_orig,
+                                           p_e->mx_proto_id, p_e->mx_chan_id,
+                                           p_e->p_callback, p_e->p_ref_data);
+            }
+
+            GKI_freebuf (p_e);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_init
+**
+** Description      This function is on the SEC startup
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_init (UINT8 sec_mode)
+{
+#if 0  /* cleared in btm_init; put back in if calling from anywhere else! */
+    int i;
+
+    memset (btm_cb.sec_serv_rec, 0, sizeof (btm_cb.sec_serv_rec));
+    memset (btm_cb.sec_dev_rec, 0, sizeof (btm_cb.sec_dev_rec));
+    memset (&btm_cb.pairing_tle, 0, sizeof(TIMER_LIST_ENT));
+
+#endif
+    btm_cb.security_mode = sec_mode;
+    memset (btm_cb.pairing_bda, 0xff, BD_ADDR_LEN);
+    btm_cb.max_collision_delay = BTM_SEC_MAX_COLLISION_DELAY;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_device_down
+**
+** Description      This function should be called when device is disabled or
+**                  turned off
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_device_down (void)
+{
+    BTM_TRACE_EVENT1 ("btm_sec_device_down()  State: %s", btm_pair_state_descr(btm_cb.pairing_state));
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_dev_reset
+**
+** Description      This function should be called after device reset
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_dev_reset (void)
+{
+#if (BTM_PRE_LISBON_INCLUDED == TRUE)
+    if (btm_cb.security_mode == BTM_SEC_MODE_LINK)
+    {
+        btsnd_hcic_write_auth_enable (TRUE);
+        btsnd_hcic_write_encr_mode (HCI_ENCRYPT_MODE_POINT_TO_POINT);
+    }
+#endif
+#if (BTM_PRE_LISBON_INCLUDED == TRUE)
+    else
+#endif
+        /* this function is only called from btm_read_local_features_complete()
+         * right now. */
+        if (HCI_SIMPLE_PAIRING_SUPPORTED(btm_cb.devcb.local_features))
+    {
+        btsnd_hcic_write_simple_pairing_mode(HCI_SP_MODE_ENABLED);
+#if BLE_INCLUDED == TRUE
+        btsnd_hcic_set_event_mask(LOCAL_BR_EDR_CONTROLLER_ID,
+                                  (UINT8 *)HCI_DUMO_EVENT_MASK_EXT);
+#else
+        btsnd_hcic_set_event_mask(LOCAL_BR_EDR_CONTROLLER_ID,
+                                  (UINT8 *)HCI_LISBON_EVENT_MASK_EXT);
+#endif
+        /* set the default IO capabilities */
+        btm_cb.devcb.loc_io_caps = BTM_LOCAL_IO_CAPS;
+        /* add mx service to use no security */
+#if (RFCOMM_INCLUDED == TRUE)
+        BTM_SetSecurityLevel(FALSE, "RFC_MUX", BTM_SEC_SERVICE_RFC_MUX,
+                             BTM_SEC_NONE, BT_PSM_RFCOMM, BTM_SEC_PROTO_RFCOMM, 0);
+#endif
+    }
+    else
+    {
+        btm_cb.security_mode = BTM_SEC_MODE_SERVICE;
+    }
+
+    BTM_TRACE_DEBUG1 ("btm_sec_dev_reset sec mode: %d", btm_cb.security_mode);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_abort_access_req
+**
+** Description      This function is called by the L2CAP or RFCOMM to abort
+**                  the pending operation.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_abort_access_req (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev (bd_addr);
+
+    if (!p_dev_rec)
+        return;
+
+    if (btm_cb.api.p_abort_callback)
+        (*btm_cb.api.p_abort_callback)(bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name);
+
+    if ((p_dev_rec->sec_state != BTM_SEC_STATE_AUTHORIZING)
+        && (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHENTICATING))
+        return;
+
+    p_dev_rec->sec_state  = BTM_SEC_STATE_IDLE;
+    p_dev_rec->p_callback = NULL;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_dd_create_conn
+**
+** Description      This function is called to create the ACL connection for
+**                  the dedicated boding process
+**
+** Returns          void
+**
+*******************************************************************************/
+static tBTM_STATUS btm_sec_dd_create_conn (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    tL2C_LCB         *p_lcb;
+
+    /* Make sure an L2cap link control block is available */
+    if ((p_lcb = l2cu_allocate_lcb (p_dev_rec->bd_addr, TRUE)) == NULL)
+    {
+        BTM_TRACE_WARNING6 ("Security Manager: failed allocate LCB [%02x%02x%02x%02x%02x%02x]",
+                            p_dev_rec->bd_addr[0], p_dev_rec->bd_addr[1], p_dev_rec->bd_addr[2],
+                            p_dev_rec->bd_addr[3], p_dev_rec->bd_addr[4], p_dev_rec->bd_addr[5]);
+
+        return(BTM_NO_RESOURCES);
+    }
+
+    /* set up the control block to indicated dedicated bonding */
+    btm_cb.pairing_flags |= BTM_PAIR_FLAGS_DISC_WHEN_DONE;
+
+    if (l2cu_create_conn(p_lcb) == FALSE)
+    {
+        BTM_TRACE_WARNING6 ("Security Manager: failed create  [%02x%02x%02x%02x%02x%02x]",
+                            p_dev_rec->bd_addr[0], p_dev_rec->bd_addr[1], p_dev_rec->bd_addr[2],
+                            p_dev_rec->bd_addr[3], p_dev_rec->bd_addr[4], p_dev_rec->bd_addr[5]);
+
+        l2cu_release_lcb(p_lcb);
+        return(BTM_NO_RESOURCES);
+    }
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_acl_update_busy_level (BTM_BLI_PAGE_EVT);
+#endif
+
+    BTM_TRACE_DEBUG6 ("Security Manager: btm_sec_dd_create_conn [%02x%02x%02x%02x%02x%02x]",
+                      p_dev_rec->bd_addr[0], p_dev_rec->bd_addr[1], p_dev_rec->bd_addr[2],
+                      p_dev_rec->bd_addr[3], p_dev_rec->bd_addr[4], p_dev_rec->bd_addr[5]);
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_PIN_REQ);
+
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_rmt_name_request_complete
+**
+** Description      This function is called when remote name was obtained from
+**                  the peer device
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_rmt_name_request_complete (UINT8 *p_bd_addr, UINT8 *p_bd_name, UINT8 status)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    int              i;
+    DEV_CLASS        dev_class;
+    UINT8            old_sec_state;
+
+    BTM_TRACE_EVENT0 ("btm_sec_rmt_name_request_complete");
+    if (((p_bd_addr == NULL) && !BTM_ACL_IS_CONNECTED(btm_cb.connecting_bda))
+        || ((p_bd_addr != NULL) && !BTM_ACL_IS_CONNECTED(p_bd_addr)))
+    {
+        btm_acl_resubmit_page();
+    }
+
+    /* If remote name request failed, p_bd_addr is null and we need to search */
+    /* based on state assuming that we are doing 1 at a time */
+    if (p_bd_addr)
+        p_dev_rec = btm_find_dev (p_bd_addr);
+    else
+    {
+        p_dev_rec = &btm_cb.sec_dev_rec[0];
+
+        for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+        {
+            if ((p_dev_rec->sec_flags & BTM_SEC_IN_USE)
+                && (p_dev_rec->sec_state == BTM_SEC_STATE_GETTING_NAME))
+            {
+                p_bd_addr = p_dev_rec->bd_addr;
+                break;
+            }
+        }
+
+        if (i == BTM_SEC_MAX_DEVICE_RECORDS)
+            p_dev_rec = NULL;
+    }
+
+
+    /* Commenting out trace due to obf/compilation problems.
+    */
+#if (BT_USE_TRACES == TRUE)
+    if (!p_bd_name)
+        p_bd_name = (UINT8 *)"";
+
+    if (p_dev_rec)
+    {
+        BTM_TRACE_EVENT5 ("Security Manager: rmt_name_complete PairState: %s  RemName: %s  status: %d State:%d  p_dev_rec: 0x%08x ",
+                          btm_pair_state_descr (btm_cb.pairing_state), p_bd_name,
+                          status, p_dev_rec->sec_state, p_dev_rec);
+    }
+    else
+    {
+        BTM_TRACE_EVENT3 ("Security Manager: rmt_name_complete PairState: %s  RemName: %s  status: %d",
+                          btm_pair_state_descr (btm_cb.pairing_state), p_bd_name,
+                          status);
+    }
+#endif
+
+    if (p_dev_rec)
+    {
+        old_sec_state = p_dev_rec->sec_state;
+        if (status == HCI_SUCCESS)
+        {
+            BCM_STRNCPY_S ((char *)p_dev_rec->sec_bd_name, sizeof (p_dev_rec->sec_bd_name), (char *)p_bd_name, BTM_MAX_REM_BD_NAME_LEN);
+            p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
+            BTM_TRACE_EVENT1 ("setting BTM_SEC_NAME_KNOWN sec_flags:0x%x", p_dev_rec->sec_flags);
+        }
+        else
+        {
+            /* Notify all clients waiting for name to be resolved even if it failed so clients can continue */
+            p_dev_rec->sec_bd_name[0] = 0;
+        }
+
+        if (p_dev_rec->sec_state == BTM_SEC_STATE_GETTING_NAME)
+            p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+
+        /* Notify all clients waiting for name to be resolved */
+        for (i = 0;i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++)
+        {
+            if (btm_cb.p_rmt_name_callback[i])
+                (*btm_cb.p_rmt_name_callback[i])(p_bd_addr, p_dev_rec->dev_class,
+                                                 p_dev_rec->sec_bd_name);
+        }
+    }
+    else
+    {
+        dev_class[0] = 0;
+        dev_class[1] = 0;
+        dev_class[2] = 0;
+
+        /* Notify all clients waiting for name to be resolved even if not found so clients can continue */
+        for (i = 0;i < BTM_SEC_MAX_RMT_NAME_CALLBACKS; i++)
+        {
+            if (btm_cb.p_rmt_name_callback[i])
+                (*btm_cb.p_rmt_name_callback[i])(p_bd_addr, dev_class, (UINT8 *)"");
+        }
+
+        return;
+    }
+
+    /* If we were delaying asking UI for a PIN because name was not resolved, ask now */
+    if ( (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_LOCAL_PIN) && p_bd_addr
+         &&  (memcmp (btm_cb.pairing_bda, p_bd_addr, BD_ADDR_LEN) == 0) )
+    {
+        BTM_TRACE_EVENT2 ("btm_sec_rmt_name_request_complete() delayed pin now being requested flags:0x%x, (p_pin_callback=0x%p)", btm_cb.pairing_flags, btm_cb.api.p_pin_callback);
+
+        if (((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) == 0) &&
+            ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PIN_REQD) == 0) &&
+            btm_cb.api.p_pin_callback)
+        {
+            BTM_TRACE_EVENT0 ("btm_sec_rmt_name_request_complete() calling pin_callback");
+            btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD;
+            (*btm_cb.api.p_pin_callback) (p_dev_rec->bd_addr, p_dev_rec->dev_class, p_bd_name);
+        }
+
+        /* Set the same state again to force the timer to be restarted */
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_LOCAL_PIN);
+        return;
+    }
+
+    /* Check if we were delaying bonding because name was not resolved */
+    if ( btm_cb.pairing_state == BTM_PAIR_STATE_GET_REM_NAME)
+    {
+        if (p_bd_addr && memcmp (btm_cb.pairing_bda, p_bd_addr, BD_ADDR_LEN) == 0)
+        {
+            BTM_TRACE_EVENT2 ("btm_sec_rmt_name_request_complete() continue bonding sm4: 0x%04x, status:0x%x", p_dev_rec->sm4, status);
+            if (status != HCI_SUCCESS)
+            {
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+                (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,  p_dev_rec->dev_class,
+                                                        p_dev_rec->sec_bd_name, status);
+                return;
+            }
+
+            /* if peer is very old legacy devices, HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT is not reported */
+            if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4))
+            {
+                /* set the KNOWN flag only if BTM_PAIR_FLAGS_REJECTED_CONNECT is not set.
+                 * If it is set, there may be a race condition */
+				BTM_TRACE_EVENT1 ("btm_sec_rmt_name_request_complete  IS_SM4_UNKNOWN Flags:0x%04x", btm_cb.pairing_flags);
+                if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT) == 0)
+                {
+                    p_dev_rec->sm4 |= BTM_SM4_KNOWN;
+                }
+            }
+
+            /* BT 2.1 or carkit, bring up the connection to force the peer to request PIN.
+            ** Else prefetch (btm_sec_check_prefetch_pin will do the prefetching if needed)
+            */
+            if ((p_dev_rec->sm4 != BTM_SM4_KNOWN) || !btm_sec_check_prefetch_pin(p_dev_rec))
+            {
+                /* if we rejected incoming connection request, we have to wait HCI_Connection_Complete event */
+                /*  before originating  */
+                if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT)
+                {
+                    BTM_TRACE_WARNING0 ("btm_sec_rmt_name_request_complete: waiting HCI_Connection_Complete after rejecting connection");
+                }
+                /* Both we and the peer are 2.1 - continue to create connection */
+                else if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED)
+                {
+                    BTM_TRACE_WARNING0 ("btm_sec_rmt_name_request_complete: failed to start connection");
+
+                    btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+                    (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,  p_dev_rec->dev_class,
+                                                            p_dev_rec->sec_bd_name, HCI_ERR_MEMORY_FULL);
+                }
+            }
+            return;
+        }
+        else
+        {
+            BTM_TRACE_WARNING0 ("btm_sec_rmt_name_request_complete: wrong BDA, retry with pairing BDA");
+
+            BTM_ReadRemoteDeviceName (btm_cb.pairing_bda, NULL);
+            return;
+        }
+    }
+
+    /* check if we were delaying link_key_callback because name was not resolved */
+    if (p_dev_rec->link_key_not_sent)
+    {
+        /* If HCI connection complete has not arrived, wait for it */
+        if (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE)
+            return;
+
+        p_dev_rec->link_key_not_sent = FALSE;
+        btm_send_link_key_notif(p_dev_rec);
+
+        /* If its not us who perform authentication, we should tell stackserver */
+        /* that some authentication has been completed                          */
+        /* This is required when different entities receive link notification and auth complete */
+        if (!(p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE))
+        {
+            if (btm_cb.api.p_auth_complete_callback)
+                (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                        p_dev_rec->dev_class,
+                                                        p_dev_rec->sec_bd_name, HCI_SUCCESS);
+
+        }
+    }
+
+    /* If this is a bonding procedure can disconnect the link now */
+    if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+        && (p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))
+    {
+        BTM_TRACE_WARNING0 ("btm_sec_rmt_name_request_complete (none/ce)");
+        p_dev_rec->security_required &= ~(BTM_SEC_OUT_AUTHENTICATE);
+        l2cu_start_post_bond_timer(p_dev_rec->hci_handle);
+        return;
+    }
+
+    if (old_sec_state != BTM_SEC_STATE_GETTING_NAME)
+        return;
+
+    /* If get name failed, notify the waiting layer */
+    if (status != HCI_SUCCESS)
+    {
+        btm_sec_dev_rec_cback_event  (p_dev_rec, BTM_ERR_PROCESSING);
+        return;
+    }
+
+    if (p_dev_rec->sm4 & BTM_SM4_REQ_PEND)
+    {
+        BTM_TRACE_EVENT0 ("waiting for remote features!!");
+        return;
+    }
+
+    /* Remote Name succeeded, execute the next security procedure, if any */
+    status = (UINT8)btm_sec_execute_procedure (p_dev_rec);
+
+    /* If result is pending reply from the user or from the device is pending */
+    if (status == BTM_CMD_STARTED)
+        return;
+
+    /* There is no next procedure or start of procedure failed, notify the waiting layer */
+    btm_sec_dev_rec_cback_event  (p_dev_rec, status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_rmt_host_support_feat_evt
+**
+** Description      This function is called when the
+**                  HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT is received
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_rmt_host_support_feat_evt (UINT8 *p)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BD_ADDR         bd_addr;        /* peer address */
+    BD_FEATURES     features;
+
+    STREAM_TO_BDADDR (bd_addr, p);
+    p_dev_rec = btm_find_or_alloc_dev (bd_addr);
+
+    BTM_TRACE_EVENT2 ("btm_sec_rmt_host_support_feat_evt  sm4: 0x%x  p[0]: 0x%x", p_dev_rec->sm4, p[0]);
+
+    if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4))
+    {
+        p_dev_rec->sm4 = BTM_SM4_KNOWN;
+        STREAM_TO_ARRAY(features, p, BD_FEATURES_LEN);
+        if (HCI_SSP_HOST_SUPPORTED(features))
+        {
+            p_dev_rec->sm4 = BTM_SM4_TRUE;
+        }
+        BTM_TRACE_EVENT2 ("btm_sec_rmt_host_support_feat_evt sm4: 0x%x features[0]: 0x%x", p_dev_rec->sm4, features[0]);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_io_capabilities_req
+**
+** Description      This function is called when LM request for the IO
+**                  capability of the local device and
+**                  if the OOB data is present for the device in the event
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_io_capabilities_req (UINT8 *p)
+{
+    tBTM_SP_IO_REQ  evt_data;
+    UINT8           err_code = 0;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BOOLEAN         is_orig = TRUE;
+    UINT8           callback_rc = BTM_SUCCESS;
+
+    STREAM_TO_BDADDR (evt_data.bd_addr, p);
+
+    /* setup the default response according to compile options */
+    /* assume that the local IO capability does not change
+     * loc_io_caps is initialized with the default value */
+    evt_data.io_cap = btm_cb.devcb.loc_io_caps;
+    evt_data.oob_data = BTM_OOB_NONE;
+    evt_data.auth_req = BTM_DEFAULT_AUTH_REQ;
+
+    BTM_TRACE_EVENT1 ("btm_io_capabilities_req() State: %s", btm_pair_state_descr(btm_cb.pairing_state));
+
+    p_dev_rec = btm_find_or_alloc_dev (evt_data.bd_addr);
+    p_dev_rec->sm4 |= BTM_SM4_TRUE;
+
+    BTM_TRACE_EVENT3 ("btm_io_capabilities_req() State: %s  Flags: 0x%04x  p_cur_service: 0x%08x",
+                      btm_pair_state_descr(btm_cb.pairing_state), btm_cb.pairing_flags, p_dev_rec->p_cur_service);
+
+    if (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+    {
+        if (btm_cb.pairing_state == BTM_PAIR_STATE_INCOMING_SSP)
+        {
+            /* received IO capability response already-> not the originator of SSP */
+            is_orig = FALSE;
+
+            if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_PEER_STARTED_DD)
+                evt_data.auth_req = BTM_DEFAULT_DD_AUTH_REQ;
+        }
+        /* security is already in progress */
+        else if (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_PIN_REQ)
+        {
+/* coverity[uninit_use_in_call]
+Event uninit_use_in_call: Using uninitialized element of array "evt_data.bd_addr" in call to function "memcmp"
+False-positive: evt_data.bd_addr is set at the beginning with:     STREAM_TO_BDADDR (evt_data.bd_addr, p);
+*/
+            if (memcmp (evt_data.bd_addr, btm_cb.pairing_bda, BD_ADDR_LEN))
+            {
+                /* and it's not the device in bonding -> reject it */
+                err_code = HCI_ERR_HOST_BUSY_PAIRING;
+            }
+            else
+            {
+                /* local device initiated dedicated bonding */
+                evt_data.auth_req = BTM_DEFAULT_DD_AUTH_REQ;
+            }
+        }
+        else
+        {
+            err_code = HCI_ERR_HOST_BUSY_PAIRING;
+        }
+    }
+
+    /* paring is not allowed */
+    if (btm_cb.pairing_disabled)
+        err_code = HCI_ERR_PAIRING_NOT_ALLOWED;
+
+    if (err_code != 0)
+    {
+/* coverity[uninit_use_in_call]
+Event uninit_use_in_call: Using uninitialized element of array "evt_data.bd_addr" in call to function "memcmp"
+False-positive: evt_data.bd_addr is set at the beginning with:     STREAM_TO_BDADDR (evt_data.bd_addr, p);
+*/
+        btsnd_hcic_io_cap_req_neg_reply(evt_data.bd_addr, err_code);
+        return;
+    }
+
+    evt_data.is_orig = is_orig;
+
+    if (is_orig)
+    {
+        /* local device initiated the pairing non-bonding -> use p_cur_service */
+        if (!(btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) &&
+            p_dev_rec->p_cur_service &&
+            (p_dev_rec->p_cur_service->security_flags & BTM_SEC_OUT_AUTHENTICATE))
+        {
+            evt_data.auth_req = (p_dev_rec->p_cur_service->security_flags & BTM_SEC_OUT_MITM) ? BTM_AUTH_SP_YES : BTM_AUTH_SP_NO;
+        }
+    }
+
+    /* Notify L2CAP to increase timeout */
+    l2c_pin_code_request (evt_data.bd_addr);
+
+    memcpy (btm_cb.pairing_bda, evt_data.bd_addr, BD_ADDR_LEN);
+
+/* coverity[uninit_use_in_call]
+Event uninit_use_in_call: Using uninitialized element of array "evt_data.bd_addr" in call to function "memcmp"
+False-positive: False-positive: evt_data.bd_addr is set at the beginning with:     STREAM_TO_BDADDR (evt_data.bd_addr, p);
+*/
+    if (!memcmp (evt_data.bd_addr, btm_cb.connecting_bda, BD_ADDR_LEN))
+        memcpy (p_dev_rec->dev_class, btm_cb.connecting_dc, DEV_CLASS_LEN);
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS);
+
+    callback_rc = BTM_SUCCESS;
+    if (p_dev_rec->sm4 & BTM_SM4_UPGRADE)
+    {
+        p_dev_rec->sm4 &= ~BTM_SM4_UPGRADE;
+
+        /* link key upgrade: always use SPGB_YES - assuming we want to save the link key */
+        evt_data.auth_req = BTM_AUTH_SPGB_YES;
+    }
+    else if (btm_cb.api.p_sp_callback)
+    {
+        /* the callback function implementation may change the IO capability... */
+        callback_rc = (*btm_cb.api.p_sp_callback) (BTM_SP_IO_REQ_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+    }
+
+#if BTM_OOB_INCLUDED == TRUE
+    if ((callback_rc == BTM_SUCCESS) || (BTM_OOB_UNKNOWN != evt_data.oob_data))
+#else
+    if (callback_rc == BTM_SUCCESS)
+#endif
+    {
+        if ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD))
+        {
+            evt_data.auth_req = (BTM_AUTH_DD_BOND | (evt_data.auth_req & BTM_AUTH_YN_BIT));
+        }
+
+        /* if the user does not indicate "reply later" by setting the oob_data to unknown
+         * send the response right now. Save the current IO capability in the control block */
+        btm_cb.devcb.loc_auth_req   = evt_data.auth_req;
+        btm_cb.devcb.loc_io_caps    = evt_data.io_cap;
+
+        BTM_TRACE_EVENT4 ("btm_io_capabilities_req: State: %s  IO_CAP:%d oob_data:%d auth_req:%d",
+                          btm_pair_state_descr(btm_cb.pairing_state), evt_data.io_cap,
+                          evt_data.oob_data, evt_data.auth_req);
+
+        btsnd_hcic_io_cap_req_reply(evt_data.bd_addr, evt_data.io_cap,
+                                    evt_data.oob_data, evt_data.auth_req);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_io_capabilities_rsp
+**
+** Description      This function is called when the IO capability of the
+**                  specified device is received
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_io_capabilities_rsp (UINT8 *p)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    tBTM_SP_IO_RSP evt_data;
+
+    STREAM_TO_BDADDR (evt_data.bd_addr, p);
+    STREAM_TO_UINT8 (evt_data.io_cap, p);
+    STREAM_TO_UINT8 (evt_data.oob_data, p);
+    STREAM_TO_UINT8 (evt_data.auth_req, p);
+
+    /* Allocate a new device record or reuse the oldest one */
+    p_dev_rec = btm_find_or_alloc_dev (evt_data.bd_addr);
+
+    /* If no security is in progress, this indicates incoming security */
+    if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE)
+    {
+        memcpy (btm_cb.pairing_bda, evt_data.bd_addr, BD_ADDR_LEN);
+
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_INCOMING_SSP);
+
+        /* Make sure we reset the trusted mask to help against attacks */
+        BTM_SEC_CLR_TRUSTED_DEVICE(p_dev_rec->trusted_mask);
+
+        /* work around for FW bug */
+        btm_inq_stop_on_ssp();
+    }
+
+    /* Notify L2CAP to increase timeout */
+    l2c_pin_code_request (evt_data.bd_addr);
+
+    /* We must have a device record here.
+     * Use the connecting device's CoD for the connection */
+/* coverity[uninit_use_in_call]
+Event uninit_use_in_call: Using uninitialized element of array "evt_data.bd_addr" in call to function "memcmp"
+FALSE-POSITIVE error from Coverity test-tool. evt_data.bd_addr is set at the beginning with:     STREAM_TO_BDADDR (evt_data.bd_addr, p);
+*/
+    if (!memcmp (evt_data.bd_addr, btm_cb.connecting_bda, BD_ADDR_LEN))
+        memcpy (p_dev_rec->dev_class, btm_cb.connecting_dc, DEV_CLASS_LEN);
+
+    /* peer sets dedicated bonding bit and we did not initiate dedicated bonding */
+    if (btm_cb.pairing_state == BTM_PAIR_STATE_INCOMING_SSP /* peer initiated bonding */
+        && (evt_data.auth_req & BTM_AUTH_DD_BOND) )            /* and dedicated bonding bit is set */
+    {
+        btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PEER_STARTED_DD;
+    }
+
+    /* save the IO capability in the device record */
+    p_dev_rec->rmt_io_caps  = evt_data.io_cap;
+    p_dev_rec->rmt_auth_req = evt_data.auth_req;
+
+    if (btm_cb.api.p_sp_callback)
+        (*btm_cb.api.p_sp_callback) (BTM_SP_IO_RSP_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+}
+
+/*******************************************************************************
+**
+** Function         btm_proc_sp_req_evt
+**
+** Description      This function is called to process/report
+**                  HCI_USER_CONFIRMATION_REQUEST_EVT
+**                  or HCI_USER_PASSKEY_REQUEST_EVT
+**                  or HCI_USER_PASSKEY_NOTIFY_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p)
+{
+    tBTM_STATUS status = BTM_ERR_PROCESSING;
+    tBTM_SP_EVT_DATA evt_data;
+    UINT8               *p_bda = evt_data.cfm_req.bd_addr;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    /* All events start with bd_addr */
+    STREAM_TO_BDADDR (p_bda, p);
+
+    BTM_TRACE_EVENT4 ("btm_proc_sp_req_evt() BDA: %08x%04x event: 0x%x, State: %s",
+                      (p_bda[0]<<24) + (p_bda[1]<<16) + (p_bda[2]<<8) + p_bda[3], (p_bda[4] << 8) + p_bda[5],
+                      event, btm_pair_state_descr(btm_cb.pairing_state));
+
+    if ( ((p_dev_rec = btm_find_dev (p_bda)) != NULL)
+         &&  (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         &&  (memcmp (btm_cb.pairing_bda, p_bda, BD_ADDR_LEN) == 0) )
+    {
+        memcpy (evt_data.cfm_req.bd_addr, p_dev_rec->bd_addr, BD_ADDR_LEN);
+        memcpy (evt_data.cfm_req.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+        BCM_STRNCPY_S ((char *)evt_data.cfm_req.bd_name, sizeof(evt_data.cfm_req.bd_name), (char *)p_dev_rec->sec_bd_name, BTM_MAX_REM_BD_NAME_LEN);
+
+        switch (event)
+        {
+            case BTM_SP_CFM_REQ_EVT:
+                /* Numeric confirmation. Need user to conf the passkey */
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM);
+
+                /* The device record must be allocated in the "IO cap exchange" step */
+                STREAM_TO_UINT32 (evt_data.cfm_req.num_val, p);
+
+                evt_data.cfm_req.just_works = TRUE;
+
+                /* process user confirm req in association with the auth_req param */
+#if (BTM_LOCAL_IO_CAPS == BTM_IO_CAP_IO)
+                if ( (p_dev_rec->rmt_io_caps == BTM_IO_CAP_IO)
+                     &&  (btm_cb.devcb.loc_io_caps == BTM_IO_CAP_IO)
+                     &&  ((p_dev_rec->rmt_auth_req & BTM_AUTH_SP_YES) || (btm_cb.devcb.loc_auth_req & BTM_AUTH_SP_YES)) )
+                {
+                    /* Both devices are DisplayYesNo and one or both devices want to authenticate
+                       -> use authenticated link key */
+                    evt_data.cfm_req.just_works = FALSE;
+                }
+#endif
+                BTM_TRACE_DEBUG5 ("btm_proc_sp_req_evt()  just_works:%d, io loc:%d, rmt:%d, auth loc:%d, rmt:%d",
+                                  evt_data.cfm_req.just_works, btm_cb.devcb.loc_io_caps, p_dev_rec->rmt_io_caps,
+                                  btm_cb.devcb.loc_auth_req, p_dev_rec->rmt_auth_req);
+
+                evt_data.cfm_req.loc_auth_req   = btm_cb.devcb.loc_auth_req;
+                evt_data.cfm_req.rmt_auth_req   = p_dev_rec->rmt_auth_req;
+                evt_data.cfm_req.loc_io_caps    = btm_cb.devcb.loc_io_caps;
+                evt_data.cfm_req.rmt_io_caps    = p_dev_rec->rmt_io_caps;
+                break;
+
+            case BTM_SP_KEY_NOTIF_EVT:
+                /* Passkey notification (other side is a keyboard) */
+                STREAM_TO_UINT32 (evt_data.key_notif.passkey, p);
+
+                BTM_TRACE_DEBUG1 ("BTM_SP_KEY_NOTIF_EVT:  passkey: %u", evt_data.key_notif.passkey);
+
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+                break;
+
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+            case BTM_SP_KEY_REQ_EVT:
+                /* HCI_USER_PASSKEY_REQUEST_EVT */
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_KEY_ENTRY);
+                break;
+#endif
+        }
+
+        if (btm_cb.api.p_sp_callback)
+        {
+            status = (*btm_cb.api.p_sp_callback) (event, (tBTM_SP_EVT_DATA *)&evt_data);
+            if (status != BTM_NOT_AUTHORIZED)
+            {
+                return;
+            }
+            /* else BTM_NOT_AUTHORIZED means when the app wants to reject the req right now */
+        }
+        else if ( (event == BTM_SP_CFM_REQ_EVT) && (evt_data.cfm_req.just_works == TRUE) )
+        {
+            /* automatically reply with just works if no sp_cback */
+            status = BTM_SUCCESS;
+        }
+
+        if (event == BTM_SP_CFM_REQ_EVT)
+        {
+            BTM_TRACE_DEBUG1 ("calling BTM_ConfirmReqReply with status: %d", status);
+            BTM_ConfirmReqReply (status, p_bda);
+        }
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+        else if (event == BTM_SP_KEY_REQ_EVT)
+        {
+            BTM_PasskeyReqReply(status, p_bda, 0);
+        }
+#endif
+        return;
+    }
+
+    /* Something bad. we can only fail this connection */
+    btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+
+    if (BTM_SP_CFM_REQ_EVT == event)
+    {
+        btsnd_hcic_user_conf_reply (p_bda, FALSE);
+    }
+    else if (BTM_SP_KEY_NOTIF_EVT == event)
+    {
+        /* do nothing -> it very unlikely to happen.
+        This event is most likely to be received by a HID host when it first connects to a HID device.
+        Usually the Host initiated the connection in this case.
+        On Mobile platforms, if there's a security process happening,
+        the host probably can not initiate another connection.
+        BTW (PC) is another story.  */
+        if (NULL != (p_dev_rec = btm_find_dev (p_bda)) )
+        {
+            btm_sec_disconnect (p_dev_rec->hci_handle, HCI_ERR_AUTH_FAILURE);
+        }
+    }
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+    else
+    {
+        btsnd_hcic_user_passkey_neg_reply(p_bda);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btm_keypress_notif_evt
+**
+** Description      This function is called when a key press notification is
+**                  received
+**
+** Returns          void
+**
+*******************************************************************************/
+void  btm_keypress_notif_evt (UINT8 *p)
+{
+    tBTM_SP_KEYPRESS    evt_data;
+    UINT8 *p_bda;
+
+    /* parse & report BTM_SP_KEYPRESS_EVT */
+    if (btm_cb.api.p_sp_callback)
+    {
+        p_bda = evt_data.bd_addr;
+
+        STREAM_TO_BDADDR (p_bda, p);
+        evt_data.notif_type = *p;
+
+        (*btm_cb.api.p_sp_callback) (BTM_SP_KEYPRESS_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_simple_pair_complete
+**
+** Description      This function is called when simple pairing process is
+**                  complete
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_simple_pair_complete (UINT8 *p)
+{
+    tBTM_SP_COMPLT  evt_data;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    UINT8           status;
+    BOOLEAN         disc = FALSE;
+
+    status = *p++;
+    STREAM_TO_BDADDR (evt_data.bd_addr, p);
+
+    if ((p_dev_rec = btm_find_dev (evt_data.bd_addr)) == NULL)
+    {
+        BTM_TRACE_ERROR2 ("btm_simple_pair_complete() with unknown BDA: %08x%04x",
+                          (evt_data.bd_addr[0]<<24) + (evt_data.bd_addr[1]<<16) + (evt_data.bd_addr[2]<<8) + evt_data.bd_addr[3],
+                          (evt_data.bd_addr[4] << 8) + evt_data.bd_addr[5]);
+        return;
+    }
+
+    BTM_TRACE_EVENT3 ("btm_simple_pair_complete()  Pair State: %s  Status:%d  sec_state: %u",
+                      btm_pair_state_descr(btm_cb.pairing_state),  status, p_dev_rec->sec_state);
+
+    evt_data.status = BTM_ERR_PROCESSING;
+    if (status == HCI_SUCCESS)
+    {
+        evt_data.status = BTM_SUCCESS;
+        p_dev_rec->sec_flags |= BTM_SEC_AUTHENTICATED;
+    }
+    else
+    {
+        if (status == HCI_ERR_PAIRING_NOT_ALLOWED)
+        {
+            /* The test spec wants the peer device to get this failure code. */
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_DISCONNECT);
+
+            /* Change the timer to 1 second */
+            btu_start_timer (&btm_cb.pairing_tle, BTU_TTYPE_USER_FUNC, BT_1SEC_TIMEOUT);
+        }
+        else if (memcmp (btm_cb.pairing_bda, evt_data.bd_addr, BD_ADDR_LEN) == 0)
+        {
+            /* stop the timer */
+            btu_stop_timer (&btm_cb.pairing_tle);
+
+            if (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHENTICATING)
+            {
+                /* the initiating side: will receive auth complete event. disconnect ACL at that time */
+                disc = TRUE;
+            }
+        }
+        else
+            disc = TRUE;
+    }
+
+    /* Let the pairing state stay active, p_auth_complete_callback will report the failure */
+    memcpy (evt_data.bd_addr, p_dev_rec->bd_addr, BD_ADDR_LEN);
+    memcpy (evt_data.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+    if (btm_cb.api.p_sp_callback)
+        (*btm_cb.api.p_sp_callback) (BTM_SP_COMPLT_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+
+    if (disc)
+    {
+        /* simple pairing failed */
+        btm_sec_send_hci_disconnect (p_dev_rec, HCI_ERR_AUTH_FAILURE);
+    }
+}
+
+#if BTM_OOB_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function         btm_rem_oob_req
+**
+** Description      This function is called to process/report
+**                  HCI_REMOTE_OOB_DATA_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_rem_oob_req (UINT8 *p)
+{
+    UINT8 *p_bda;
+    tBTM_SP_RMT_OOB  evt_data;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    BT_OCTET16      c;
+    BT_OCTET16      r;
+
+    p_bda = evt_data.bd_addr;
+
+    STREAM_TO_BDADDR (p_bda, p);
+
+    BTM_TRACE_EVENT6 ("btm_rem_oob_req() BDA: %02x:%02x:%02x:%02x:%02x:%02x",
+                      p_bda[0], p_bda[1], p_bda[2], p_bda[3], p_bda[4], p_bda[5]);
+
+    if ( (NULL != (p_dev_rec = btm_find_dev (p_bda))) &&
+         btm_cb.api.p_sp_callback)
+    {
+        memcpy (evt_data.bd_addr, p_dev_rec->bd_addr, BD_ADDR_LEN);
+        memcpy (evt_data.dev_class, p_dev_rec->dev_class, DEV_CLASS_LEN);
+        BCM_STRNCPY_S((char *)evt_data.bd_name, sizeof(evt_data.bd_name), (char *)p_dev_rec->sec_bd_name, BTM_MAX_REM_BD_NAME_LEN+1);
+
+        btm_sec_change_pairing_state(BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP);
+        if ((*btm_cb.api.p_sp_callback) (BTM_SP_RMT_OOB_EVT, (tBTM_SP_EVT_DATA *)&evt_data) == BTM_NOT_AUTHORIZED)
+        {
+            BTM_RemoteOobDataReply(TRUE, p_bda, c, r);
+        }
+        return;
+    }
+
+    /* something bad. we can only fail this connection */
+    btm_cb.acl_disc_reason = HCI_ERR_HOST_REJECT_SECURITY;
+    btsnd_hcic_rem_oob_neg_reply (p_bda);
+}
+
+/*******************************************************************************
+**
+** Function         btm_read_local_oob_complete
+**
+** Description      This function is called when read local oob data is
+**                  completed by the LM
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_read_local_oob_complete (UINT8 *p)
+{
+    tBTM_SP_LOC_OOB evt_data;
+    UINT8           status = *p++;
+
+    BTM_TRACE_EVENT1 ("btm_read_local_oob_complete:%d", status);
+    if (status == HCI_SUCCESS)
+    {
+        evt_data.status = BTM_SUCCESS;
+        STREAM_TO_ARRAY16(evt_data.c, p);
+        STREAM_TO_ARRAY16(evt_data.r, p);
+    }
+    else
+        evt_data.status = BTM_ERR_PROCESSING;
+
+    if (btm_cb.api.p_sp_callback)
+        (*btm_cb.api.p_sp_callback) (BTM_SP_LOC_OOB_EVT, (tBTM_SP_EVT_DATA *)&evt_data);
+}
+#endif /* BTM_OOB_INCLUDED */
+
+/*******************************************************************************
+**
+** Function         btm_sec_auth_collision
+**
+** Description      This function is called when authentication or encryption
+**                  needs to be retried at a later time.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btm_sec_auth_collision (UINT16 handle)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if (!btm_cb.collision_start_time)
+        btm_cb.collision_start_time = GKI_get_tick_count ();
+
+    if ((GKI_get_tick_count () - btm_cb.collision_start_time) < btm_cb.max_collision_delay)
+    {
+        if (handle == BTM_SEC_INVALID_HANDLE)
+        {
+            if ((p_dev_rec = btm_sec_find_dev_by_sec_state (BTM_SEC_STATE_AUTHENTICATING)) == NULL)
+                p_dev_rec = btm_sec_find_dev_by_sec_state (BTM_SEC_STATE_ENCRYPTING);
+        }
+        else
+            p_dev_rec = btm_find_dev_by_handle (handle);
+
+        if (p_dev_rec != NULL)
+        {
+            BTM_TRACE_DEBUG1 ("btm_sec_auth_collision: state %d (retrying in a moment...)", p_dev_rec->sec_state);
+            /* We will restart authentication after timeout */
+            if (p_dev_rec->sec_state == BTM_SEC_STATE_AUTHENTICATING || p_dev_rec->sec_state == BTM_SEC_STATE_ENCRYPTING)
+                p_dev_rec->sec_state = 0;
+
+            btm_cb.p_collided_dev_rec = p_dev_rec;
+            btm_cb.sec_collision_tle.param = (UINT32) btm_sec_collision_timeout;
+            btu_start_timer (&btm_cb.sec_collision_tle, BTU_TTYPE_USER_FUNC, BT_1SEC_TIMEOUT);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_auth_complete
+**
+** Description      This function is when authentication of the connection is
+**                  completed by the LM
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_auth_complete (UINT16 handle, UINT8 status)
+{
+    UINT8            old_sm4;
+    tBTM_PAIRING_STATE  old_state   = btm_cb.pairing_state;
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev_by_handle (handle);
+    BOOLEAN             are_bonding = FALSE;
+
+    /* Commenting out trace due to obf/compilation problems.
+    */
+#if (BT_USE_TRACES == TRUE)
+    if (p_dev_rec)
+    {
+        BTM_TRACE_EVENT6 ("Security Manager: auth_complete PairState: %s  handle:%u  status:%d  dev->sec_state: %u  Bda:%08x, RName:%s",
+                          btm_pair_state_descr (btm_cb.pairing_state),
+                          handle, status,
+                          p_dev_rec->sec_state,
+                          (p_dev_rec->bd_addr[2]<<24)+(p_dev_rec->bd_addr[3]<<16)+(p_dev_rec->bd_addr[4]<<8)+p_dev_rec->bd_addr[5],
+                          p_dev_rec->sec_bd_name);
+    }
+    else
+    {
+        BTM_TRACE_EVENT3 ("Security Manager: auth_complete PairState: %s  handle:%u  status:%d",
+                          btm_pair_state_descr (btm_cb.pairing_state),
+                          handle, status);
+    }
+#endif
+
+    /* For transaction collision we need to wait and repeat.  There is no need */
+    /* for random timeout because only slave should receive the result */
+    if ((status == HCI_ERR_LMP_ERR_TRANS_COLLISION) || (status == HCI_ERR_DIFF_TRANSACTION_COLLISION))
+    {
+        btm_sec_auth_collision(handle);
+        return;
+    }
+    btm_cb.collision_start_time = 0;
+
+    btm_restore_mode();
+
+    /* Check if connection was made just to do bonding.  If we authenticate
+       the connection that is up, this is the last event received.
+    */
+    if (p_dev_rec
+        && (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+        && !(btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE))
+    {
+        p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE;
+
+        l2cu_start_post_bond_timer (p_dev_rec->hci_handle);
+    }
+
+    if (!p_dev_rec)
+        return;
+
+    /* keep the old sm4 flag and clear the retry bit in control block */
+    old_sm4 = p_dev_rec->sm4;
+    p_dev_rec->sm4 &= ~BTM_SM4_RETRY;
+
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         &&  (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+         &&  (memcmp (p_dev_rec->bd_addr, btm_cb.pairing_bda, BD_ADDR_LEN) == 0) )
+        are_bonding = TRUE;
+
+    btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+    if (p_dev_rec->sec_state != BTM_SEC_STATE_AUTHENTICATING)
+    {
+        if ( (btm_cb.api.p_auth_complete_callback && status != HCI_SUCCESS)
+             &&  (old_state != BTM_PAIR_STATE_IDLE) )
+        {
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                    p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, status);
+        }
+        return;
+    }
+
+    /* There can be a race condition, when we are starting authentication and
+    ** the peer device is doing encryption.
+    ** If first we receive encryption change up, then initiated authentication
+    ** can not be performed.  According to the spec we can not do authentication
+    ** on the encrypted link, so device is correct.
+    */
+    if ((status == HCI_ERR_COMMAND_DISALLOWED)
+        && ((p_dev_rec->sec_flags & (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED)) ==
+            (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED)))
+    {
+        status = HCI_SUCCESS;
+    }
+    /* Currently we do not notify user if it is a keyboard which connects */
+    /* User probably Disabled the keyboard while it was asleap.  Let her try */
+    if (btm_cb.api.p_auth_complete_callback)
+    {
+        /* report the suthentication status */
+        if (old_state != BTM_PAIR_STATE_IDLE)
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                    p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, status);
+    }
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+
+    /* If this is a bonding procedure can disconnect the link now */
+    if (are_bonding)
+    {
+        p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE;
+
+        if (status != HCI_SUCCESS)
+            btm_sec_send_hci_disconnect (p_dev_rec, HCI_ERR_PEER_USER);
+        else
+            l2cu_start_post_bond_timer (p_dev_rec->hci_handle);
+
+        return;
+    }
+
+    /* If authentication failed, notify the waiting layer */
+    if (status != HCI_SUCCESS)
+    {
+        if ((old_sm4 & BTM_SM4_RETRY) == 0)
+        {
+            /* allow retry only once */
+            if (status == HCI_ERR_LMP_ERR_TRANS_COLLISION)
+            {
+                /* not retried yet. set the retry bit */
+                p_dev_rec->sm4 |= BTM_SM4_RETRY;
+                BTM_TRACE_DEBUG2 ("Collision retry sm4:x%x sec_flags:0x%x", p_dev_rec->sm4, p_dev_rec->sec_flags);
+            }
+            /* this retry for missing key is for Lisbon or later only.
+             * Legacy device do not need this. the controller will drive the retry automatically */
+            else if (HCI_ERR_KEY_MISSING == status && BTM_SEC_IS_SM4(p_dev_rec->sm4))
+            {
+                /* not retried yet. set the retry bit */
+                p_dev_rec->sm4 |= BTM_SM4_RETRY;
+                p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_KNOWN;
+                BTM_TRACE_DEBUG2 ("Retry for missing key sm4:x%x sec_flags:0x%x", p_dev_rec->sm4, p_dev_rec->sec_flags);
+
+                /* With BRCM controller, we do not need to delete the stored link key in controller.
+                If the stack may sit on top of other controller, we may need this
+                BTM_DeleteStoredLinkKey (bd_addr, NULL); */
+            }
+
+            if (p_dev_rec->sm4 & BTM_SM4_RETRY)
+            {
+                btm_sec_execute_procedure (p_dev_rec);
+                return;
+            }
+        }
+
+        btm_sec_dev_rec_cback_event (p_dev_rec, BTM_ERR_PROCESSING);
+
+        if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_DISC_WHEN_DONE)
+        {
+            btm_sec_send_hci_disconnect (p_dev_rec, HCI_ERR_AUTH_FAILURE);
+        }
+        return;
+    }
+
+    p_dev_rec->sec_flags |= BTM_SEC_AUTHENTICATED;
+
+    /* Authentication succeeded, execute the next security procedure, if any */
+    status = btm_sec_execute_procedure (p_dev_rec);
+
+    /* If there is no next procedure, or procedure failed to start, notify the caller */
+    if (status != BTM_CMD_STARTED)
+        btm_sec_dev_rec_cback_event (p_dev_rec, status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_mkey_comp_event
+**
+** Description      This function is when encryption of the connection is
+**                  completed by the LM
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev_by_handle (handle);
+    UINT8 bd_addr[BD_ADDR_LEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff} ;
+
+    BTM_TRACE_EVENT2 ("Security Manager: mkey comp status:%d State:%d",
+                      status, (p_dev_rec) ? p_dev_rec->sec_state : 0);
+
+    /* If encryption setup failed, notify the waiting layer */
+    /* There is no next procedure or start of procedure failed, notify the waiting layer */
+    if (btm_cb.mkey_cback)
+    {
+        if (!p_dev_rec)
+            (btm_cb.mkey_cback)(bd_addr, status, key_flg );
+        else
+            (btm_cb.mkey_cback)(p_dev_rec->bd_addr, status, key_flg );
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_encrypt_change
+**
+** Description      This function is when encryption of the connection is
+**                  completed by the LM
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev_by_handle (handle);
+
+    BTM_TRACE_EVENT3 ("Security Manager: encrypt_change status:%d State:%d, encr_enable = %d",
+                      status, (p_dev_rec) ? p_dev_rec->sec_state : 0, encr_enable);
+    BTM_TRACE_DEBUG1 ("before update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags );
+
+    /* For transaction collision we need to wait and repeat.  There is no need */
+    /* for random timeout because only slave should receive the result */
+    if ((status == HCI_ERR_LMP_ERR_TRANS_COLLISION) || (status == HCI_ERR_DIFF_TRANSACTION_COLLISION))
+    {
+        btm_sec_auth_collision(handle);
+        return;
+    }
+    btm_cb.collision_start_time = 0;
+
+    if (!p_dev_rec)
+        return;
+
+    if ((status == HCI_SUCCESS) && encr_enable)
+        p_dev_rec->sec_flags |= (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED);
+
+    /* It is possible that we decrypted the link to perform role switch */
+    /* mark link not to be encrypted, so that when we execute security next time it will kick in again */
+    if ((status == HCI_SUCCESS) && !encr_enable)
+        p_dev_rec->sec_flags &= ~BTM_SEC_ENCRYPTED;
+
+    BTM_TRACE_DEBUG1 ("after update p_dev_rec->sec_flags=0x%x", p_dev_rec->sec_flags );
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+    if (p_dev_rec->device_type  == BT_DEVICE_TYPE_BLE)
+    {
+        btm_ble_link_encrypted(p_dev_rec->bd_addr, encr_enable);
+        return;
+    }
+    else
+        /* BR/EDR connection, update the encryption key size to be 16 as always */
+        p_dev_rec->enc_key_size = 16;
+#endif
+
+    /* If this encryption was started by peer do not need to do anything */
+    if (p_dev_rec->sec_state != BTM_SEC_STATE_ENCRYPTING)
+    {
+        if (BTM_SEC_STATE_DELAY_FOR_ENC == p_dev_rec->sec_state)
+        {
+            p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+            p_dev_rec->p_callback = NULL;
+            l2cu_resubmit_pending_sec_req (p_dev_rec->bd_addr);
+        }
+        return;
+    }
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+
+    /* If encryption setup failed, notify the waiting layer */
+    if (status != HCI_SUCCESS)
+    {
+        btm_sec_dev_rec_cback_event (p_dev_rec, BTM_ERR_PROCESSING);
+        return;
+    }
+
+    /* Encryption setup succeeded, execute the next security procedure, if any */
+    status = (UINT8)btm_sec_execute_procedure (p_dev_rec);
+
+    /* If there is no next procedure, or procedure failed to start, notify the caller */
+    if (status != BTM_CMD_STARTED)
+        btm_sec_dev_rec_cback_event (p_dev_rec, status);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_create_conn
+**
+** Description      This function records current role and forwards request to
+**                  HCI
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN btm_sec_create_conn (BD_ADDR bda, UINT16 packet_types,
+                             UINT8 page_scan_rep_mode, UINT8 page_scan_mode,
+                             UINT16 clock_offset, UINT8 allow_switch)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_or_alloc_dev (bda);
+
+    memcpy (btm_cb.connecting_bda, p_dev_rec->bd_addr,   BD_ADDR_LEN);
+    memcpy (btm_cb.connecting_dc,  p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+    btm_cb.acl_disc_reason = 0xff ;
+
+    p_dev_rec->sec_state   = BTM_SEC_STATE_IDLE;
+    p_dev_rec->role_master = TRUE;
+
+    /* If any SCO link up, do not allow a switch */
+    if (BTM_GetNumScoLinks() != 0)
+        allow_switch = HCI_CR_CONN_NOT_ALLOW_SWITCH;
+
+    return(btsnd_hcic_create_conn (bda, packet_types, page_scan_rep_mode,
+                                   page_scan_mode, clock_offset, allow_switch));
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_connect_after_reject_timeout
+**
+** Description      Connection for bonding could not start because of the collision
+**                  Initiate outgoing connection
+**
+** Returns          Pointer to the TLE struct
+**
+*******************************************************************************/
+static void btm_sec_connect_after_reject_timeout (TIMER_LIST_ENT *p_tle)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_cb.p_collided_dev_rec;
+
+    BTM_TRACE_EVENT0 ("btm_sec_connect_after_reject_timeout()");
+    btm_cb.sec_collision_tle.param = 0;
+    btm_cb.p_collided_dev_rec = 0;
+
+    if (btm_sec_dd_create_conn(p_dev_rec) != BTM_CMD_STARTED)
+    {
+        BTM_TRACE_WARNING0 ("Security Manager: btm_sec_connect_after_reject_timeout: failed to start connection");
+
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+        (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,  p_dev_rec->dev_class,
+                                                p_dev_rec->sec_bd_name, HCI_ERR_MEMORY_FULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_connected
+**
+** Description      This function is when a connection to the peer device is
+**                  establsihed
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (bda);
+    UINT8            res;
+    BOOLEAN          is_pairing_device = FALSE;
+    tACL_CONN        *p_acl_cb;
+
+    btm_acl_resubmit_page();
+
+    /* Commenting out trace due to obf/compilation problems.
+    */
+#if (BT_USE_TRACES == TRUE)
+    if (p_dev_rec)
+    {
+        BTM_TRACE_EVENT6 ("Security Manager: btm_sec_connected in state: %s  handle:%d status:%d enc_mode:%d  bda:%x RName:%s",
+                          btm_pair_state_descr(btm_cb.pairing_state), handle, status, enc_mode,
+                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5],
+                          p_dev_rec->sec_bd_name);
+    }
+    else
+    {
+        BTM_TRACE_EVENT5 ("Security Manager: btm_sec_connected in state: %s  handle:%d status:%d enc_mode:%d  bda:%x ",
+                          btm_pair_state_descr(btm_cb.pairing_state), handle, status, enc_mode,
+                          (bda[2]<<24)+(bda[3]<<16)+(bda[4]<<8)+bda[5]);
+    }
+#endif
+
+    if (!p_dev_rec)
+    {
+        /* There is no device record for new connection.  Allocate one */
+        if (status == HCI_SUCCESS)
+        {
+            p_dev_rec = btm_sec_alloc_dev (bda);
+        }
+        else
+        {
+            /* can not find the device record and the status is error,
+             * just ignore it */
+            return;
+        }
+    }
+    else    /* Update the timestamp for this device */
+    {
+        p_dev_rec->timestamp = btm_cb.dev_rec_count++;
+        if (p_dev_rec->sm4 & BTM_SM4_CONN_PEND)
+        {
+            /* tell L2CAP it's a bonding connection. */
+            if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+                 &&  (memcmp (btm_cb.pairing_bda, p_dev_rec->bd_addr, BD_ADDR_LEN) == 0)
+                 &&  (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) )
+            {
+                /* if incoming connection failed while pairing, then try to connect and continue */
+                /* Motorola S9 disconnects without asking pin code */
+                if ((status != HCI_SUCCESS)&&(btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_PIN_REQ))
+                {
+                    BTM_TRACE_WARNING0 ("Security Manager: btm_sec_connected: incoming connection failed without asking PIN");
+
+                    p_dev_rec->sm4 &= ~BTM_SM4_CONN_PEND;
+                    if (p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN)
+                    {
+                        /* Start timer with 0 to initiate connection with new LCB */
+                        /* because L2CAP will delete current LCB with this event  */
+                        btm_cb.p_collided_dev_rec = p_dev_rec;
+                        btm_cb.sec_collision_tle.param = (UINT32) btm_sec_connect_after_reject_timeout;
+                        btu_start_timer (&btm_cb.sec_collision_tle, BTU_TTYPE_USER_FUNC, 0);
+                    }
+                    else
+                    {
+                        btm_sec_change_pairing_state (BTM_PAIR_STATE_GET_REM_NAME);
+                        BTM_ReadRemoteDeviceName(p_dev_rec->bd_addr, NULL);
+                    }
+#if BTM_DISC_DURING_RS == TRUE
+                    p_dev_rec->rs_disc_pending   = BTM_SEC_RS_NOT_PENDING;     /* reset flag */
+#endif
+                    return;
+                }
+                else
+                {
+                    l2cu_update_lcb_4_bonding(p_dev_rec->bd_addr, TRUE);
+                }
+            }
+            /* always clear the pending flag */
+            p_dev_rec->sm4 &= ~BTM_SM4_CONN_PEND;
+        }
+    }
+
+#if BTM_DISC_DURING_RS == TRUE
+    p_dev_rec->rs_disc_pending   = BTM_SEC_RS_NOT_PENDING;     /* reset flag */
+#endif
+
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         && (memcmp (btm_cb.pairing_bda, bda, BD_ADDR_LEN) == 0) )
+    {
+        /* if we rejected incoming connection from bonding device */
+        if ((status == HCI_ERR_HOST_REJECT_DEVICE)
+            &&(btm_cb.pairing_flags & BTM_PAIR_FLAGS_REJECTED_CONNECT))
+        {
+            BTM_TRACE_WARNING2 ("Security Manager: btm_sec_connected: HCI_Conn_Comp Flags:0x%04x, sm4: 0x%x",
+                btm_cb.pairing_flags, p_dev_rec->sm4);
+
+            btm_cb.pairing_flags &= ~BTM_PAIR_FLAGS_REJECTED_CONNECT;
+            if (BTM_SEC_IS_SM4_UNKNOWN(p_dev_rec->sm4))
+            {
+                /* Try again: RNR when no ACL causes HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT */
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_GET_REM_NAME);
+                BTM_ReadRemoteDeviceName(bda, NULL);
+                return;
+            }
+
+            /* if we already have pin code */
+            if (btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_LOCAL_PIN)
+            {
+                /* Start timer with 0 to initiate connection with new LCB */
+                /* because L2CAP will delete current LCB with this event  */
+                btm_cb.p_collided_dev_rec = p_dev_rec;
+                btm_cb.sec_collision_tle.param = (UINT32) btm_sec_connect_after_reject_timeout;
+                btu_start_timer (&btm_cb.sec_collision_tle, BTU_TTYPE_USER_FUNC, 0);
+            }
+
+            return;
+        }
+        /* wait for incoming connection without resetting pairing state */
+        else if (status == HCI_ERR_CONNECTION_EXISTS)
+        {
+            BTM_TRACE_WARNING0 ("Security Manager: btm_sec_connected: Wait for incoming connection");
+            return;
+        }
+
+        is_pairing_device = TRUE;
+    }
+
+    /* If connection was made to do bonding restore link security if changed */
+    btm_restore_mode();
+
+    /* if connection fails during pin request, notify application */
+    if (status != HCI_SUCCESS)
+    {
+        /* If connection failed because of during pairing, need to tell user */
+        if (is_pairing_device)
+        {
+            p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE;
+            p_dev_rec->sec_flags &= ~(BTM_SEC_LINK_KEY_KNOWN | BTM_SEC_LINK_KEY_AUTHED);
+            BTM_TRACE_DEBUG1 ("security_required:%x ", p_dev_rec->security_required );
+
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+            /* We need to notify host that the key is not known any more */
+            if (btm_cb.api.p_auth_complete_callback)
+            {
+                (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                        p_dev_rec->dev_class,
+                                                        p_dev_rec->sec_bd_name, status);
+            }
+        }
+        else if ((status == HCI_ERR_AUTH_FAILURE)                   ||
+                 (status == HCI_ERR_KEY_MISSING)                         ||
+                 (status == HCI_ERR_HOST_REJECT_SECURITY)                ||
+                 (status == HCI_ERR_PAIRING_NOT_ALLOWED)                 ||
+                 (status == HCI_ERR_UNIT_KEY_USED)                       ||
+                 (status == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED) ||
+                 (status == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE)           ||
+                 (status == HCI_ERR_REPEATED_ATTEMPTS))
+        {
+            p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE;
+            p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_KNOWN;
+
+            /* We need to notify host that the key is not known any more */
+            if (btm_cb.api.p_auth_complete_callback)
+            {
+                (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                        p_dev_rec->dev_class,
+                                                        p_dev_rec->sec_bd_name, status);
+            }
+        }
+
+        if (status == HCI_ERR_CONNECTION_TOUT || status == HCI_ERR_LMP_RESPONSE_TIMEOUT  ||
+            status == HCI_ERR_UNSPECIFIED     || status == HCI_ERR_PAGE_TIMEOUT)
+            btm_sec_dev_rec_cback_event (p_dev_rec, BTM_DEVICE_TIMEOUT);
+        else
+            btm_sec_dev_rec_cback_event (p_dev_rec, BTM_ERR_PROCESSING);
+
+        return;
+    }
+
+    /* If initiated dedicated bonding, return the link key now, and initiate disconnect */
+    /* If dedicated bonding, and we now have a link key, we are all done */
+    if ( is_pairing_device
+         && (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN) )
+    {
+        if (p_dev_rec->link_key_not_sent)
+        {
+            p_dev_rec->link_key_not_sent = FALSE;
+            btm_send_link_key_notif(p_dev_rec);
+        }
+
+        p_dev_rec->security_required &= ~BTM_SEC_OUT_AUTHENTICATE;
+
+        /* remember flag before it is initialized */
+        if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+            res = TRUE;
+        else
+            res = FALSE;
+
+        if (btm_cb.api.p_auth_complete_callback)
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                    p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, HCI_SUCCESS);
+
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+
+        if ( res )
+        {
+            /* Let l2cap start bond timer */
+            l2cu_update_lcb_4_bonding (p_dev_rec->bd_addr, TRUE);
+        }
+
+        return;
+    }
+
+    p_dev_rec->hci_handle = handle;
+
+    /* role may not be correct here, it will be updated by l2cap, but we need to */
+    /* notify btm_acl that link is up, so starting of rmt name request will not */
+    /* set paging flag up */
+    p_acl_cb = btm_bda_to_acl(bda);
+    if (p_acl_cb)
+    {
+        /* whatever is in btm_establish_continue() without reporting the BTM_BL_CONN_EVT event */
+#if (!defined(BTM_BYPASS_EXTRA_ACL_SETUP) || BTM_BYPASS_EXTRA_ACL_SETUP == FALSE)
+        /* For now there are a some devices that do not like sending */
+        /* commands events and data at the same time. */
+        /* Set the packet types to the default allowed by the device */
+        btm_set_packet_types (p_acl_cb, btm_cb.btm_acl_pkt_types_supported);
+
+        if (btm_cb.btm_def_link_policy)
+            BTM_SetLinkPolicy (p_acl_cb->remote_addr, &btm_cb.btm_def_link_policy);
+#endif
+
+        BTM_SetLinkSuperTout (p_acl_cb->remote_addr, btm_cb.btm_def_link_super_tout);
+    }
+    btm_acl_created (bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name, handle, HCI_ROLE_SLAVE, FALSE);
+
+    /* Initialize security flags.  We need to do that because some            */
+    /* authorization complete could have come after the connection is dropped */
+    /* and that would set wrong flag that link has been authorized already    */
+    p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED |
+                              BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED);
+
+    if (enc_mode != HCI_ENCRYPT_MODE_DISABLED)
+        p_dev_rec->sec_flags |= (BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED);
+
+    if (btm_cb.security_mode == BTM_SEC_MODE_LINK)
+        p_dev_rec->sec_flags |= BTM_SEC_AUTHENTICATED;
+
+    p_dev_rec->link_key_changed = FALSE;
+
+    /* After connection is established we perform security if we do not know */
+    /* the name, or if we are originator because some procedure can have */
+    /* been scheduled while connection was down */
+    BTM_TRACE_DEBUG1 ("is_originator:%d ", p_dev_rec->is_originator);
+    if (!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN) || p_dev_rec->is_originator)
+    {
+        if ((res = btm_sec_execute_procedure (p_dev_rec)) != BTM_CMD_STARTED)
+            btm_sec_dev_rec_cback_event (p_dev_rec, res);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_role_changed
+**
+** Description      This function is colled when controller reports role
+**                  changed, or failed command status for Role Change request
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_role_changed (void *p_ref_data)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = (tBTM_SEC_DEV_REC *)p_ref_data;
+    UINT8 res;
+
+    BTM_TRACE_EVENT0 ("Security Manager: role changed");
+
+    /* If this role switch was started by peer do not need to do anything */
+    if (p_dev_rec->sec_state != BTM_SEC_STATE_SWITCHING_ROLE)
+        return;
+
+    /* If serurity required was to FORCE switch and it failed, notify the waiting layer */
+    if (((p_dev_rec->security_required & BTM_SEC_FORCE_MASTER) && !p_dev_rec->role_master)
+        || ((p_dev_rec->security_required & BTM_SEC_FORCE_SLAVE)  &&  p_dev_rec->role_master))
+    {
+        btm_sec_dev_rec_cback_event (p_dev_rec, BTM_ERR_PROCESSING);
+        return;
+    }
+
+    p_dev_rec->sec_flags |= BTM_SEC_ROLE_SWITCHED;
+
+    p_dev_rec->security_required &= ~(BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER |
+                                      BTM_SEC_FORCE_SLAVE  | BTM_SEC_ATTEMPT_SLAVE);
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+
+    if ((res = (UINT8)btm_sec_execute_procedure (p_dev_rec)) != BTM_CMD_STARTED)
+    {
+        btm_sec_dev_rec_cback_event (p_dev_rec, res);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_disconnect
+**
+** Description      This function is called to disconnect HCI link
+**
+** Returns          btm status
+**
+*******************************************************************************/
+tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev_by_handle (handle);
+
+    /* In some weird race condition we may not have a record */
+    if (!p_dev_rec)
+    {
+        btsnd_hcic_disconnect (handle, reason);
+        return(BTM_SUCCESS);
+    }
+
+    /* If we are in the process of bonding we need to tell client that auth failed */
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         &&  (memcmp (btm_cb.pairing_bda, p_dev_rec->bd_addr, BD_ADDR_LEN) == 0)
+         &&  (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD) )
+    {
+        /* we are currently doing bonding.  Link will be disconnected when done */
+        btm_cb.pairing_flags |= BTM_PAIR_FLAGS_DISC_WHEN_DONE;
+        return(BTM_BUSY);
+    }
+
+    return(btm_sec_send_hci_disconnect(p_dev_rec, reason));
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_disconnected
+**
+** Description      This function is when a connection to the peer device is
+**                  dropped
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_disconnected (UINT16 handle, UINT8 reason)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev_by_handle (handle);
+    UINT8             old_pairing_flags = btm_cb.pairing_flags;
+    int               result = HCI_ERR_AUTH_FAILURE;
+
+    /* If page was delayed for disc complete, can do it now */
+    btm_cb.discing = FALSE;
+
+    btm_acl_resubmit_page();
+
+    if (!p_dev_rec)
+        return;
+
+#if BTM_DISC_DURING_RS == TRUE
+    BTM_TRACE_ERROR0("btm_sec_disconnected - Clearing Pending flag");
+    p_dev_rec->rs_disc_pending = BTM_SEC_RS_NOT_PENDING;     /* reset flag */
+#endif
+
+    /* clear unused flags */
+    p_dev_rec->sm4 &= BTM_SM4_TRUE;
+
+    BTM_TRACE_EVENT6("btm_sec_disconnected() sec_req:x%x  State: %s   reason:%d bda:%04x%08x RName:%s",
+                     p_dev_rec->security_required, btm_pair_state_descr(btm_cb.pairing_state), reason,  (p_dev_rec->bd_addr[0]<<8)+p_dev_rec->bd_addr[1],
+                     (p_dev_rec->bd_addr[2]<<24)+(p_dev_rec->bd_addr[3]<<16)+(p_dev_rec->bd_addr[4]<<8)+p_dev_rec->bd_addr[5], p_dev_rec->sec_bd_name);
+
+    BTM_TRACE_EVENT1("before Update sec_flags=0x%x", p_dev_rec->sec_flags);
+
+    /* If we are in the process of bonding we need to tell client that auth failed */
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         && (memcmp (btm_cb.pairing_bda, p_dev_rec->bd_addr, BD_ADDR_LEN) == 0))
+    {
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+        p_dev_rec->sec_flags &= ~BTM_SEC_LINK_KEY_KNOWN;
+        if (btm_cb.api.p_auth_complete_callback)
+        {
+            /* If the disconnection reason is REPEATED_ATTEMPTS,
+               send this error message to complete callback function
+               to display the error message of Repeated attempts.
+               All others, send HCI_ERR_AUTH_FAILURE. */
+            if (reason == HCI_ERR_REPEATED_ATTEMPTS)
+            {
+                result = HCI_ERR_REPEATED_ATTEMPTS;
+            }
+            else if (old_pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+            {
+                result = HCI_ERR_HOST_REJECT_SECURITY;
+            }
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,     p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, result);
+        }
+    }
+
+    p_dev_rec->hci_handle = BTM_SEC_INVALID_HANDLE;
+    p_dev_rec->sec_state  = BTM_SEC_STATE_IDLE;
+
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+    p_dev_rec->enc_key_size = 0;
+    btm_ble_resume_bg_conn(NULL, TRUE);
+    /* see sec_flags processing in btm_acl_removed */
+#endif
+    p_dev_rec->sec_flags &= ~(BTM_SEC_AUTHORIZED | BTM_SEC_AUTHENTICATED | BTM_SEC_ENCRYPTED | BTM_SEC_ROLE_SWITCHED);
+
+    p_dev_rec->security_required = BTM_SEC_NONE;
+    p_dev_rec->p_callback = NULL; /* when the peer device time out the authentication before we do, this call back must be reset here */
+    BTM_TRACE_EVENT1("after Update sec_flags=0x%x", p_dev_rec->sec_flags);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_link_key_notification
+**
+** Description      This function is called when a new connection link key is
+**                  generated
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_or_alloc_dev (p_bda);
+    BOOLEAN          we_are_bonding = FALSE;
+
+    BTM_TRACE_EVENT3 ("btm_sec_link_key_notification()  BDA:%04x%08x, TYPE: %d",
+                      (p_bda[0]<<8)+p_bda[1], (p_bda[2]<<24)+(p_bda[3]<<16)+(p_bda[4]<<8)+p_bda[5],
+                      key_type);
+
+    /* If connection was made to do bonding restore link security if changed */
+    btm_restore_mode();
+
+    /* Override the key type if version is pre-1.1 */
+    if (btm_cb.devcb.local_version.hci_version < HCI_VERSION_1_1)
+        p_dev_rec->link_key_type = BTM_LKEY_TYPE_IGNORE;
+    if (key_type != BTM_LKEY_TYPE_CHANGED_COMB)
+        p_dev_rec->link_key_type = key_type;
+
+    p_dev_rec->sec_flags |= BTM_SEC_LINK_KEY_KNOWN;
+
+    memcpy (p_dev_rec->link_key, p_link_key, LINK_KEY_LEN);
+
+    if ( (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+         && (memcmp (btm_cb.pairing_bda, p_bda, BD_ADDR_LEN) == 0) )
+    {
+        if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+            we_are_bonding = TRUE;
+        else
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+    }
+
+    /* If name is not known at this point delay calling callback until the name is   */
+    /* resolved. Unless it is a HID Device and we really need to send all link keys. */
+    if ((!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN)
+        &&  ((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) != BTM_COD_MAJOR_PERIPHERAL)) )
+    {
+        BTM_TRACE_EVENT3 ("btm_sec_link_key_notification()  Delayed BDA: %08x%04x Type:%d",
+                          (p_bda[0]<<24) + (p_bda[1]<<16) + (p_bda[2]<<8) + p_bda[3], (p_bda[4] << 8) + p_bda[5], key_type);
+
+        p_dev_rec->link_key_not_sent = TRUE;
+
+        /* If it is for bonding nothing else will follow, so we need to start name resolution */
+        if (we_are_bonding)
+        {
+            if (!(btsnd_hcic_rmt_name_req (p_bda, HCI_PAGE_SCAN_REP_MODE_R1, HCI_MANDATARY_PAGE_SCAN_MODE, 0)))
+                btm_inq_rmt_name_failed();
+        }
+
+        BTM_TRACE_EVENT3 ("rmt_io_caps:%d, sec_flags:x%x, dev_class[1]:x%02x", p_dev_rec->rmt_io_caps, p_dev_rec->sec_flags, p_dev_rec->dev_class[1])
+        return;
+    }
+
+    /* If its not us who perform authentication, we should tell stackserver */
+    /* that some authentication has been completed                          */
+    /* This is required when different entities receive link notification and auth complete */
+    if (!(p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE))
+    {
+        if (btm_cb.api.p_auth_complete_callback)
+            (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr, p_dev_rec->dev_class,
+                                                    p_dev_rec->sec_bd_name, HCI_SUCCESS);
+    }
+
+    /* We will save link key only if the user authorized it - BTE report link key in all cases */
+#ifdef BRCM_NONE_BTE
+    if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_AUTHED)
+#endif
+    {
+        if (btm_cb.api.p_link_key_callback)
+        {
+            (*btm_cb.api.p_link_key_callback) (p_bda, p_dev_rec->dev_class,  p_dev_rec->sec_bd_name,
+                                               p_link_key, p_dev_rec->link_key_type);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_link_key_request
+**
+** Description      This function is called when controller requests link key
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+void btm_sec_link_key_request (UINT8 *p_bda)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_or_alloc_dev (p_bda);
+
+    BTM_TRACE_EVENT6 ("btm_sec_link_key_request()  BDA: %02x:%02x:%02x:%02x:%02x:%02x",
+                      p_bda[0], p_bda[1], p_bda[2], p_bda[3], p_bda[4], p_bda[5]);
+
+    if (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)
+    {
+        btsnd_hcic_link_key_req_reply (p_bda, p_dev_rec->link_key);
+        return;
+    }
+
+    /* Notify L2CAP to increase timeout */
+    l2c_pin_code_request (p_bda);
+
+    /* Only ask the host for a key if this guy is not already bonding */
+    if ( (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE)
+         || (memcmp (p_bda, btm_cb.pairing_bda, BD_ADDR_LEN) != 0) )
+    {
+        if (btm_cb.api.p_link_key_req_callback)
+        {
+            if ((*btm_cb.api.p_link_key_req_callback)(p_bda, p_dev_rec->link_key) == BTM_SUCCESS)
+            {
+                btsnd_hcic_link_key_req_reply (p_bda, p_dev_rec->link_key);
+                return;
+            }
+        }
+    }
+
+    /* The link key is not in the database and it is not known to the manager */
+    btsnd_hcic_link_key_neg_reply (p_bda);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_pairing_timeout
+**
+** Description      This function is called when host does not provide PIN
+**                  within requested time
+**
+** Returns          Pointer to the TLE struct
+**
+*******************************************************************************/
+static void btm_sec_pairing_timeout (TIMER_LIST_ENT *p_tle)
+{
+    tBTM_CB *p_cb = &btm_cb;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+#if BTM_OOB_INCLUDED == TRUE
+#if (BTM_LOCAL_IO_CAPS == BTM_IO_CAP_NONE)
+    tBTM_AUTH_REQ   auth_req = BTM_AUTH_AP_NO;
+#else
+    tBTM_AUTH_REQ   auth_req = BTM_AUTH_AP_YES;
+#endif
+#endif
+    UINT8   name[2];
+
+    p_cb->pairing_tle.param = 0;
+/* Coverity: FALSE-POSITIVE error from Coverity tool. Please do NOT remove following comment. */
+/* coverity[UNUSED_VALUE] pointer p_dev_rec is actually used several times... This is a Coverity false-positive, i.e. a fake issue.
+*/
+    p_dev_rec = btm_find_dev (p_cb->pairing_bda);
+
+    BTM_TRACE_EVENT2 ("btm_sec_pairing_timeout()  State: %s   Flags: %u",
+                      btm_pair_state_descr(p_cb->pairing_state), p_cb->pairing_flags);
+
+    switch (p_cb->pairing_state)
+    {
+        case BTM_PAIR_STATE_WAIT_PIN_REQ:
+            btm_sec_bond_cancel_complete();
+            break;
+
+        case BTM_PAIR_STATE_WAIT_LOCAL_PIN:
+            if ( (btm_cb.pairing_flags & BTM_PAIR_FLAGS_PRE_FETCH_PIN) == 0)
+                btsnd_hcic_pin_code_neg_reply (p_cb->pairing_bda);
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            /* We need to notify the UI that no longer need the PIN */
+            if (btm_cb.api.p_auth_complete_callback)
+            {
+                if (p_dev_rec == NULL)
+                {
+                    name[0] = 0;
+                    (*btm_cb.api.p_auth_complete_callback) (p_cb->pairing_bda,
+                                                            NULL,
+                                                            name, HCI_ERR_CONNECTION_TOUT);
+                }
+                else
+                    (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                            p_dev_rec->dev_class,
+                                                            p_dev_rec->sec_bd_name, HCI_ERR_CONNECTION_TOUT);
+            }
+            break;
+
+        case BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM:
+            btsnd_hcic_user_conf_reply (p_cb->pairing_bda, FALSE);
+            /* btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE); */
+            break;
+
+#if (BTM_LOCAL_IO_CAPS != BTM_IO_CAP_NONE)
+        case BTM_PAIR_STATE_KEY_ENTRY:
+            btsnd_hcic_user_passkey_neg_reply(p_cb->pairing_bda);
+            /* btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE); */
+            break;
+#endif /* !BTM_IO_CAP_NONE */
+
+#if BTM_OOB_INCLUDED == TRUE
+        case BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS:
+            if (btm_cb.pairing_flags & BTM_PAIR_FLAGS_WE_STARTED_DD)
+                auth_req |= BTM_AUTH_DD_BOND;
+
+            btsnd_hcic_io_cap_req_reply (p_cb->pairing_bda, btm_cb.devcb.loc_io_caps,
+                                         BTM_OOB_NONE, auth_req);
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            break;
+
+        case BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP:
+            btsnd_hcic_rem_oob_neg_reply (p_cb->pairing_bda);
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            break;
+#endif /* BTM_OOB_INCLUDED */
+
+        case BTM_PAIR_STATE_WAIT_DISCONNECT:
+            /* simple pairing failed. Started a 1-sec timer at simple pairing complete.
+             * now it's time to tear down the ACL link*/
+            if (p_dev_rec == NULL)
+            {
+                BTM_TRACE_ERROR2 ("btm_sec_pairing_timeout() BTM_PAIR_STATE_WAIT_DISCONNECT unknown BDA: %08x%04x",
+                                  (p_cb->pairing_bda[0]<<24) + (p_cb->pairing_bda[1]<<16) + (p_cb->pairing_bda[2]<<8) + p_cb->pairing_bda[3],
+                                  (p_cb->pairing_bda[4] << 8) + p_cb->pairing_bda[5]);
+                break;
+            }
+            btm_sec_send_hci_disconnect (p_dev_rec, HCI_ERR_AUTH_FAILURE);
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            break;
+
+        case BTM_PAIR_STATE_WAIT_AUTH_COMPLETE:
+            /* We need to notify the UI that timeout has happened while waiting for authentication*/
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            if (btm_cb.api.p_auth_complete_callback)
+            {
+                if (p_dev_rec == NULL)
+                {
+                    name[0] = 0;
+                    (*btm_cb.api.p_auth_complete_callback) (p_cb->pairing_bda,
+                                                            NULL,
+                                                            name, HCI_ERR_CONNECTION_TOUT);
+                }
+                else
+                    (*btm_cb.api.p_auth_complete_callback) (p_dev_rec->bd_addr,
+                                                            p_dev_rec->dev_class,
+                                                            p_dev_rec->sec_bd_name, HCI_ERR_CONNECTION_TOUT);
+            }
+            break;
+
+        default:
+            BTM_TRACE_WARNING1 ("btm_sec_pairing_timeout() not processed state: %s", btm_pair_state_descr(btm_cb.pairing_state));
+            btm_sec_change_pairing_state (BTM_PAIR_STATE_IDLE);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_pin_code_request
+**
+** Description      This function is called when controller requests PIN code
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+void btm_sec_pin_code_request (UINT8 *p_bda)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    tBTM_CB          *p_cb = &btm_cb;
+
+    BTM_TRACE_EVENT3 ("btm_sec_pin_code_request()  State: %s, BDA:%04x%08x",
+                      btm_pair_state_descr(btm_cb.pairing_state),
+                      (p_bda[0]<<8)+p_bda[1], (p_bda[2]<<24)+(p_bda[3]<<16)+(p_bda[4]<<8)+p_bda[5] );
+
+    if (btm_cb.pairing_state != BTM_PAIR_STATE_IDLE)
+    {
+        if ( (memcmp (p_bda, btm_cb.pairing_bda, BD_ADDR_LEN) == 0)  &&
+             (btm_cb.pairing_state == BTM_PAIR_STATE_WAIT_AUTH_COMPLETE) )
+        {
+             /* fake this out - porshe carkit issue - */
+//            btm_cb.pairing_state = BTM_PAIR_STATE_IDLE;
+             if(! btm_cb.pin_code_len_saved)
+             {
+                 btsnd_hcic_pin_code_neg_reply (p_bda);
+                 return;
+             }
+             else
+             {
+                 btsnd_hcic_pin_code_req_reply (p_bda, btm_cb.pin_code_len_saved, p_cb->pin_code);
+      	         return;
+             }
+        }
+        else if ((btm_cb.pairing_state != BTM_PAIR_STATE_WAIT_PIN_REQ)
+                 || memcmp (p_bda, btm_cb.pairing_bda, BD_ADDR_LEN) != 0)
+        {
+            BTM_TRACE_WARNING1 ("btm_sec_pin_code_request() rejected - state: %s",
+                                btm_pair_state_descr(btm_cb.pairing_state));
+
+#ifdef PORCHE_PAIRING_CONFLICT
+            /* reply pin code again due to counter in_rand when local initiates pairing */
+            BTM_TRACE_EVENT0 ("btm_sec_pin_code_request from remote dev. for local initiated pairing");
+            if(! btm_cb.pin_code_len_saved)
+            {
+                btsnd_hcic_pin_code_neg_reply (p_bda);
+            }
+            else
+            {
+                btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+                btsnd_hcic_pin_code_req_reply (p_bda, btm_cb.pin_code_len_saved, p_cb->pin_code);
+            }
+#else
+            btsnd_hcic_pin_code_neg_reply (p_bda);
+#endif
+            return;
+        }
+    }
+
+    p_dev_rec = btm_find_or_alloc_dev (p_bda);
+    /* received PIN code request. must be non-sm4 */
+    p_dev_rec->sm4 = BTM_SM4_KNOWN;
+
+    if (btm_cb.pairing_state == BTM_PAIR_STATE_IDLE)
+    {
+        memcpy (btm_cb.pairing_bda, p_bda, BD_ADDR_LEN);
+
+        btm_cb.pairing_flags = BTM_PAIR_FLAGS_PEER_STARTED_DD;
+        /* Make sure we reset the trusted mask to help against attacks */
+        BTM_SEC_CLR_TRUSTED_DEVICE(p_dev_rec->trusted_mask);
+    }
+
+    if (!p_cb->pairing_disabled && (p_cb->cfg.pin_type == HCI_PIN_TYPE_FIXED))
+    {
+        BTM_TRACE_EVENT0 ("btm_sec_pin_code_request fixed pin replying");
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+        btsnd_hcic_pin_code_req_reply (p_bda, p_cb->cfg.pin_code_len, p_cb->cfg.pin_code);
+        return;
+    }
+
+    /* Use the connecting device's CoD for the connection */
+    if ( (!memcmp (p_bda, p_cb->connecting_bda, BD_ADDR_LEN))
+         &&  (p_cb->connecting_dc[0] || p_cb->connecting_dc[1] || p_cb->connecting_dc[2]) )
+        memcpy (p_dev_rec->dev_class, p_cb->connecting_dc, DEV_CLASS_LEN);
+
+    /* We could have started connection after asking user for the PIN code */
+    if (btm_cb.pin_code_len != 0)
+    {
+        BTM_TRACE_EVENT0 ("btm_sec_pin_code_request bonding sending reply");
+        btsnd_hcic_pin_code_req_reply (p_bda, btm_cb.pin_code_len, p_cb->pin_code);
+
+#ifdef PORCHE_PAIRING_CONFLICT
+        btm_cb.pin_code_len_saved = btm_cb.pin_code_len;
+#endif
+
+        /* Mark that we forwarded received from the user PIN code */
+        btm_cb.pin_code_len = 0;
+
+        /* We can change mode back right away, that other connection being established */
+        /* is not forced to be secure - found a FW issue, so we can not do this
+        btm_restore_mode(); */
+
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_AUTH_COMPLETE);
+    }
+
+    /* If pairing disabled OR (no PIN callback and not bonding) */
+    /* OR we could not allocate entry in the database reject pairing request */
+    else if (p_cb->pairing_disabled
+             || (p_cb->api.p_pin_callback == NULL)
+
+             /* OR Microsoft keyboard can for some reason try to establish connection */
+             /*  the only thing we can do here is to shut it up.  Normally we will be originator */
+             /*  for keyboard bonding */
+             || (!p_dev_rec->is_originator
+                 && ((p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK) == BTM_COD_MAJOR_PERIPHERAL)
+                 &&  (p_dev_rec->dev_class[2] & BTM_COD_MINOR_KEYBOARD)) )
+    {
+        BTM_TRACE_WARNING3("btm_sec_pin_code_request(): Pairing disabled:%d; PIN callback:%x, Dev Rec:%x!",
+                           p_cb->pairing_disabled, p_cb->api.p_pin_callback, p_dev_rec);
+
+        btsnd_hcic_pin_code_neg_reply (p_bda);
+    }
+    /* Notify upper layer of PIN request and start expiration timer */
+    else
+    {
+        btm_cb.pin_code_len_saved = 0;
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_LOCAL_PIN);
+        /* Pin code request can not come at the same time as connection request */
+        memcpy (p_cb->connecting_bda, p_bda, BD_ADDR_LEN);
+        memcpy (p_cb->connecting_dc,  p_dev_rec->dev_class, DEV_CLASS_LEN);
+
+        /* Check if the name is known */
+        /* Even if name is not known we might not be able to get one */
+        /* this is the case when we are already getting something from the */
+        /* device, so HCI level is flow controlled */
+        /* Also cannot send remote name request while paging, i.e. connection is not completed */
+        if (p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN)
+        {
+            BTM_TRACE_EVENT0 ("btm_sec_pin_code_request going for callback");
+
+            btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD;
+            if (p_cb->api.p_pin_callback)
+                (*p_cb->api.p_pin_callback) (p_bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name);
+        }
+        else
+        {
+            BTM_TRACE_EVENT0 ("btm_sec_pin_code_request going for remote name");
+
+            /* We received PIN code request for the device with unknown name */
+            /* it is not user friendly just to ask for the PIN without name */
+            /* try to get name at first */
+            if (!btsnd_hcic_rmt_name_req (p_dev_rec->bd_addr,
+                                          HCI_PAGE_SCAN_REP_MODE_R1,
+                                          HCI_MANDATARY_PAGE_SCAN_MODE, 0))
+            {
+                p_dev_rec->sec_flags |= BTM_SEC_NAME_KNOWN;
+                p_dev_rec->sec_bd_name[0] = 'f';
+                p_dev_rec->sec_bd_name[1] = '0';
+                BTM_TRACE_ERROR0 ("can not send rmt_name_req?? fake a name and call callback");
+
+                btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD;
+                if (p_cb->api.p_pin_callback)
+                    (*p_cb->api.p_pin_callback) (p_bda, p_dev_rec->dev_class, p_dev_rec->sec_bd_name);
+            }
+        }
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_update_clock_offset
+**
+** Description      This function is called to update clock offset
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+    tBTM_INQ_INFO     *p_inq_info;
+
+    if ((p_dev_rec = btm_find_dev_by_handle (handle)) == NULL)
+        return;
+
+    p_dev_rec->clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID;
+
+    if ((p_inq_info = BTM_InqDbRead(p_dev_rec->bd_addr)) == NULL)
+        return;
+
+    p_inq_info->results.clock_offset = clock_offset | BTM_CLOCK_OFFSET_VALID;
+}
+
+
+/******************************************************************
+** S T A T I C     F U N C T I O N S
+*******************************************************************/
+
+/*******************************************************************************
+**
+** Function         btm_sec_execute_procedure
+**
+** Description      This function is called to start required security
+**                  procedure.  There is a case when multiplexing protocol
+**                  calls this function on the originating side, connection to
+**                  the peer will not be established.  This function in this
+**                  case performs only authorization.
+**
+** Returns          BTM_SUCCESS     - permission is granted
+**                  BTM_CMD_STARTED - in process
+**                  BTM_NO_RESOURCES  - permission declined
+**
+*******************************************************************************/
+static tBTM_STATUS btm_sec_execute_procedure (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    BTM_TRACE_EVENT3 ("btm_sec_execute_procedure: Required:0x%x Flags:0x%x State:%d",
+                      p_dev_rec->security_required, p_dev_rec->sec_flags, p_dev_rec->sec_state);
+
+    /* There is a chance that we are getting name.  Wait until done. */
+    if (p_dev_rec->sec_state != 0)
+        return(BTM_CMD_STARTED);
+
+    /* If any security is required, get the name first */
+    if (!(p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN)
+        && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE))
+    {
+        BTM_TRACE_EVENT0 ("Security Manager: Start get name");
+        if (!btm_sec_start_get_name (p_dev_rec))
+        {
+            return(BTM_NO_RESOURCES);
+        }
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If connection is not authenticated and authentication is required */
+    /* start authentication and return PENDING to the caller */
+    if ((!(p_dev_rec->sec_flags & BTM_SEC_AUTHENTICATED))
+        && (( p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_AUTHENTICATE))
+            || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_AUTHENTICATE)))
+        && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE))
+    {
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        /* if incoming UCD packet, discard it */
+        if ( !p_dev_rec->is_originator && (p_dev_rec->is_ucd == TRUE ))
+            return(BTM_FAILED_ON_SECURITY);
+#endif
+
+        BTM_TRACE_EVENT0 ("Security Manager: Start authentication");
+
+        if (!btm_sec_start_authentication (p_dev_rec))
+        {
+            return(BTM_NO_RESOURCES);
+        }
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If connection is not encrypted and encryption is required */
+    /* start encryption and return PENDING to the caller */
+    if (!(p_dev_rec->sec_flags & BTM_SEC_ENCRYPTED)
+        && (( p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_ENCRYPT))
+            || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_ENCRYPT)))
+        && (p_dev_rec->hci_handle != BTM_SEC_INVALID_HANDLE))
+    {
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        /* if incoming UCD packet, discard it */
+        if ( !p_dev_rec->is_originator && (p_dev_rec->is_ucd == TRUE ))
+            return(BTM_FAILED_ON_SECURITY);
+#endif
+
+        BTM_TRACE_EVENT0 ("Security Manager: Start encryption");
+
+        if (!btm_sec_start_encryption (p_dev_rec))
+        {
+            return(BTM_NO_RESOURCES);
+        }
+        return(BTM_CMD_STARTED);
+    }
+
+    /* If connection is not authorized and authorization is required */
+    /* start authorization and return PENDING to the caller */
+    if (!(p_dev_rec->sec_flags & BTM_SEC_AUTHORIZED)
+        && (( p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_OUT_AUTHORIZE))
+            || (!p_dev_rec->is_originator && (p_dev_rec->security_required & BTM_SEC_IN_AUTHORIZE))))
+    {
+        BTM_TRACE_EVENT2 ("service id:%d, is trusted:%d",
+                          p_dev_rec->p_cur_service->service_id,
+                          (BTM_SEC_IS_SERVICE_TRUSTED(p_dev_rec->trusted_mask,
+                                                      p_dev_rec->p_cur_service->service_id)));
+        if ((btm_sec_are_all_trusted(p_dev_rec->trusted_mask) == FALSE) &&
+            (p_dev_rec->p_cur_service->service_id < BTM_SEC_MAX_SERVICES) &&
+            (BTM_SEC_IS_SERVICE_TRUSTED(p_dev_rec->trusted_mask,
+                                        p_dev_rec->p_cur_service->service_id) == FALSE))
+        {
+            BTM_TRACE_EVENT0 ("Security Manager: Start authorization");
+            return(btm_sec_start_authorization (p_dev_rec));
+        }
+    }
+
+    /* All required  security procedures already established */
+    p_dev_rec->security_required &= ~(BTM_SEC_OUT_AUTHORIZE | BTM_SEC_IN_AUTHORIZE |
+                                      BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_IN_AUTHENTICATE |
+                                      BTM_SEC_OUT_ENCRYPT | BTM_SEC_IN_ENCRYPT |
+                                      BTM_SEC_FORCE_MASTER | BTM_SEC_ATTEMPT_MASTER |
+                                      BTM_SEC_FORCE_SLAVE | BTM_SEC_ATTEMPT_SLAVE);
+
+    BTM_TRACE_EVENT2 ("Security Manager: trusted:0x%04x%04x", p_dev_rec->trusted_mask[1], p_dev_rec->trusted_mask[0]);
+    BTM_TRACE_EVENT0 ("Security Manager: access granted");
+
+    return(BTM_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_start_get_name
+**
+** Description      This function is called to start get name procedure
+**
+** Returns          TRUE if started
+**
+*******************************************************************************/
+static BOOLEAN btm_sec_start_get_name (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    UINT8 tempstate = p_dev_rec->sec_state;
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_GETTING_NAME;
+
+    /* Device should be connected, no need to provide correct page params */
+    /* 0 and NULL are as timeout and callback params because they are not used in security get name case */
+    if ((btm_initiate_rem_name (p_dev_rec->bd_addr, NULL, BTM_RMT_NAME_SEC,
+                                0, NULL)) != BTM_CMD_STARTED)
+    {
+        p_dev_rec->sec_state = tempstate;
+        return(FALSE);
+    }
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_start_authentication
+**
+** Description      This function is called to start authentication
+**
+** Returns          TRUE if started
+**
+*******************************************************************************/
+static BOOLEAN btm_sec_start_authentication (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    p_dev_rec->sec_state = BTM_SEC_STATE_AUTHENTICATING;
+
+    return(btsnd_hcic_auth_request (p_dev_rec->hci_handle));
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_start_encryption
+**
+** Description      This function is called to start encryption
+**
+** Returns          TRUE if started
+**
+*******************************************************************************/
+static BOOLEAN btm_sec_start_encryption (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    if (!btsnd_hcic_set_conn_encrypt (p_dev_rec->hci_handle, TRUE))
+        return(FALSE);
+
+    p_dev_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_start_authorization
+**
+** Description      This function is called to start authorization
+**
+** Returns          TRUE if started
+**
+*******************************************************************************/
+static UINT8 btm_sec_start_authorization (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    UINT8    result;
+    UINT8   *p_service_name = NULL;
+    UINT8    service_id;
+
+    if ((p_dev_rec->sec_flags & BTM_SEC_NAME_KNOWN)
+        || (p_dev_rec->hci_handle == BTM_SEC_INVALID_HANDLE))
+    {
+        if (!btm_cb.api.p_authorize_callback)
+            return(BTM_MODE_UNSUPPORTED);
+
+        if (p_dev_rec->p_cur_service)
+        {
+#if BTM_SEC_SERVICE_NAME_LEN > 0
+            if (p_dev_rec->is_originator)
+                p_service_name = p_dev_rec->p_cur_service->orig_service_name;
+            else
+                p_service_name = p_dev_rec->p_cur_service->term_service_name;
+#endif
+            service_id = p_dev_rec->p_cur_service->service_id;
+        }
+        else
+            service_id = 0;
+
+        p_dev_rec->sec_state = BTM_SEC_STATE_AUTHORIZING;
+        result = (*btm_cb.api.p_authorize_callback) (p_dev_rec->bd_addr,
+                                                     p_dev_rec->dev_class,
+                                                     p_dev_rec->sec_bd_name,
+                                                     p_service_name,
+                                                     service_id,
+                                                     p_dev_rec->is_originator);
+        if (result == BTM_SUCCESS)
+        {
+            p_dev_rec->sec_flags |= BTM_SEC_AUTHORIZED;
+            p_dev_rec->sec_state = BTM_SEC_STATE_IDLE;
+        }
+        return(result);
+    }
+    btm_sec_start_get_name (p_dev_rec);
+    return(BTM_CMD_STARTED);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_are_all_trusted
+**
+** Description      This function is called check if all services are trusted
+**
+** Returns          TRUE if all are trusted, otherwise FALSE
+**
+*******************************************************************************/
+BOOLEAN btm_sec_are_all_trusted(UINT32 p_mask[])
+{
+    int trusted_inx;
+    for (trusted_inx = 0; trusted_inx < BTM_SEC_SERVICE_ARRAY_SIZE; trusted_inx++)
+    {
+        if (p_mask[trusted_inx] != BTM_SEC_TRUST_ALL)
+            return(FALSE);
+    }
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_find_first_serv
+**
+** Description      Look for the first record in the service database
+**                  with specified PSM
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+static tBTM_SEC_SERV_REC *btm_sec_find_first_serv (CONNECTION_TYPE conn_type, UINT16 psm)
+{
+    tBTM_SEC_SERV_REC *p_serv_rec = &btm_cb.sec_serv_rec[0];
+    int i;
+    BOOLEAN is_originator;
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+
+    if ( conn_type & CONNECTION_TYPE_ORIG_MASK )
+        is_originator = TRUE;
+    else
+        is_originator = FALSE;
+#else
+    is_originator = conn_type;
+#endif
+
+    if (is_originator && btm_cb.p_out_serv && btm_cb.p_out_serv->psm == psm)
+    {
+        /* If this is outgoing connection and the PSM matches p_out_serv,
+         * use it as the current service */
+        return btm_cb.p_out_serv;
+    }
+
+    /* otherwise, just find the first record with the specified PSM */
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++)
+    {
+        if ( (p_serv_rec->security_flags & BTM_SEC_IN_USE) && (p_serv_rec->psm == psm) )
+            return(p_serv_rec);
+    }
+    return(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_find_next_serv
+**
+** Description      Look for the next record in the service database
+**                  with specified PSM
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+static tBTM_SEC_SERV_REC *btm_sec_find_next_serv (tBTM_SEC_SERV_REC *p_cur)
+{
+    tBTM_SEC_SERV_REC *p_serv_rec   = &btm_cb.sec_serv_rec[0];
+    int               i;
+
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++)
+    {
+        if ((p_serv_rec->security_flags & BTM_SEC_IN_USE)
+            && (p_serv_rec->psm == p_cur->psm) )
+        {
+            if (p_cur != p_serv_rec)
+            {
+                return(p_serv_rec);
+            }
+        }
+    }
+    return(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_find_mx_serv
+**
+** Description      Look for the record in the service database with specified
+**                  PSM and multiplexor channel information
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+static tBTM_SEC_SERV_REC *btm_sec_find_mx_serv (UINT8 is_originator, UINT16 psm,
+                                                UINT32 mx_proto_id, UINT32 mx_chan_id)
+{
+    tBTM_SEC_SERV_REC *p_out_serv = btm_cb.p_out_serv;
+    tBTM_SEC_SERV_REC *p_serv_rec = &btm_cb.sec_serv_rec[0];
+    int i;
+
+    BTM_TRACE_DEBUG0 ("btm_sec_find_mx_serv");
+    if (is_originator && p_out_serv && p_out_serv->psm == psm
+        && p_out_serv->mx_proto_id == mx_proto_id
+        && p_out_serv->orig_mx_chan_id == mx_chan_id)
+    {
+        /* If this is outgoing connection and the parameters match p_out_serv,
+         * use it as the current service */
+        return btm_cb.p_out_serv;
+    }
+
+    /* otherwise, the old way */
+    for (i = 0; i < BTM_SEC_MAX_SERVICE_RECORDS; i++, p_serv_rec++)
+    {
+        if ((p_serv_rec->security_flags & BTM_SEC_IN_USE)
+            && (p_serv_rec->psm == psm)
+            && (p_serv_rec->mx_proto_id == mx_proto_id)
+            && (( is_originator && (p_serv_rec->orig_mx_chan_id  == mx_chan_id))
+                || (!is_originator && (p_serv_rec->term_mx_chan_id  == mx_chan_id))))
+        {
+            return(p_serv_rec);
+        }
+    }
+    return(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_collision_timeout
+**
+** Description      Encryption could not start because of the collision
+**                  try to do it again
+**
+** Returns          Pointer to the TLE struct
+**
+*******************************************************************************/
+static void btm_sec_collision_timeout (TIMER_LIST_ENT *p_tle)
+{
+    tBTM_STATUS status;
+
+    BTM_TRACE_EVENT0 ("btm_sec_collision_timeout()");
+    btm_cb.sec_collision_tle.param = 0;
+
+    status = btm_sec_execute_procedure (btm_cb.p_collided_dev_rec);
+
+    /* If result is pending reply from the user or from the device is pending */
+    if (status != BTM_CMD_STARTED)
+    {
+        /* There is no next procedure or start of procedure failed, notify the waiting layer */
+        btm_sec_dev_rec_cback_event (btm_cb.p_collided_dev_rec, status);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_link_key_request
+**
+** Description      This function is called when controller requests link key
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+static void btm_send_link_key_notif (tBTM_SEC_DEV_REC *p_dev_rec)
+{
+    if (btm_cb.api.p_link_key_callback)
+        (*btm_cb.api.p_link_key_callback) (p_dev_rec->bd_addr, p_dev_rec->dev_class,
+                                           p_dev_rec->sec_bd_name, p_dev_rec->link_key,
+                                           p_dev_rec->link_key_type);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_ReadTrustedMask
+**
+** Description      Get trusted mask for the peer device
+**
+** Parameters:      bd_addr   - Address of the device
+**
+** Returns          NULL, if the device record is not found.
+**                  otherwise, the trusted mask
+**
+*******************************************************************************/
+UINT32 * BTM_ReadTrustedMask (BD_ADDR bd_addr)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) != NULL)
+    {
+        return(p_dev_rec->trusted_mask);
+    }
+    else
+    {
+        return NULL;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btm_restore_mode
+**
+** Description      This function returns the security mode to previous setting
+**                  if it was changed during bonding.
+**
+**
+** Parameters:      void
+**
+*******************************************************************************/
+static void btm_restore_mode(void)
+{
+    if (btm_cb.security_mode_changed)
+    {
+        btm_cb.security_mode_changed = FALSE;
+        BTM_TRACE_DEBUG1("btm_restore_mode: Authen Enable -> %d", (btm_cb.security_mode == BTM_SEC_MODE_LINK));
+        btsnd_hcic_write_auth_enable ((UINT8)(btm_cb.security_mode == BTM_SEC_MODE_LINK));
+    }
+
+    if (btm_cb.pin_type_changed)
+    {
+        btm_cb.pin_type_changed = FALSE;
+        btsnd_hcic_write_pin_type (btm_cb.cfg.pin_type);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_find_dev_by_sec_state
+**
+** Description      Look for the record in the device database for the device
+**                  which is being authenticated or encrypted
+**
+** Returns          Pointer to the record or NULL
+**
+*******************************************************************************/
+tBTM_SEC_DEV_REC *btm_sec_find_dev_by_sec_state (UINT8 state)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = &btm_cb.sec_dev_rec[0];
+    int i;
+
+    for (i = 0; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+    {
+        if ((p_dev_rec->sec_flags & BTM_SEC_IN_USE)
+            && (p_dev_rec->sec_state == state))
+            return(p_dev_rec);
+    }
+    return(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         BTM_snd_conn_encrypt
+**
+** Description      This function is called to start/stop encryption
+**                  Used by JSR-82
+**
+** Returns          TRUE if request started
+**
+*******************************************************************************/
+BOOLEAN BTM_snd_conn_encrypt (UINT16  handle, BOOLEAN enable)
+{
+    tBTM_SEC_DEV_REC  *p_dev_rec = btm_find_dev_by_handle (handle);
+
+    BTM_TRACE_EVENT2 ("BTM_snd_conn_encrypt Security Manager: encrypt_change p_dev_rec : 0x%x, enable = %s", p_dev_rec, (enable == TRUE) ? "TRUE" : "FALSE");
+
+    if (!p_dev_rec)
+    {
+        BTM_TRACE_EVENT1 ("BTM_snd_conn_encrypt Error no  p_dev_rec : 0x%x\n", p_dev_rec);
+        return(FALSE);
+    }
+
+    if ( p_dev_rec->sec_state == BTM_SEC_STATE_IDLE)
+    {
+        if (!btsnd_hcic_set_conn_encrypt (handle, enable))
+            return(FALSE);
+
+        p_dev_rec->sec_state = BTM_SEC_STATE_ENCRYPTING;
+
+        return(TRUE);
+    }
+    else
+        return(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_change_pairing_state
+**
+** Description      This function is called to change pairing state
+**
+*******************************************************************************/
+static void btm_sec_change_pairing_state (tBTM_PAIRING_STATE new_state)
+{
+    tBTM_PAIRING_STATE  old_state = btm_cb.pairing_state;
+
+    BTM_TRACE_EVENT1 ("btm_sec_change_pairing_state  Old: %s",  btm_pair_state_descr(btm_cb.pairing_state));
+    BTM_TRACE_EVENT2 ("btm_sec_change_pairing_state  New: %s pairing_flags:0x%x",btm_pair_state_descr(new_state), btm_cb.pairing_flags);
+
+    btm_cb.pairing_state = new_state;
+
+    if (new_state == BTM_PAIR_STATE_IDLE)
+    {
+        btu_stop_timer (&btm_cb.pairing_tle);
+
+        btm_cb.pairing_flags = 0;
+        btm_cb.pin_code_len  = 0;
+
+        /* Make sure the the lcb shows we are not bonding */
+        l2cu_update_lcb_4_bonding (btm_cb.pairing_bda, FALSE);
+
+        btm_restore_mode();
+        btm_sec_check_pending_reqs();
+        btm_inq_clear_ssp();
+
+        memset (btm_cb.pairing_bda, 0xFF, BD_ADDR_LEN);
+    }
+    else
+    {
+        /* If transitionng out of idle, mark the lcb as bonding */
+        if (old_state == BTM_PAIR_STATE_IDLE)
+            l2cu_update_lcb_4_bonding (btm_cb.pairing_bda, TRUE);
+
+        btm_cb.pairing_tle.param = (TIMER_PARAM_TYPE)btm_sec_pairing_timeout;
+
+        btu_start_timer (&btm_cb.pairing_tle, BTU_TTYPE_USER_FUNC, BTM_SEC_TIMEOUT_VALUE);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_pair_state_descr
+**
+** Description      Return state description for tracing
+**
+*******************************************************************************/
+#if (BT_USE_TRACES == TRUE)
+static char *btm_pair_state_descr (tBTM_PAIRING_STATE state)
+{
+#if (BT_TRACE_VERBOSE == TRUE)
+    switch (state)
+    {
+        case BTM_PAIR_STATE_IDLE:                   return("IDLE");
+        case BTM_PAIR_STATE_GET_REM_NAME:           return("GET_REM_NAME");
+        case BTM_PAIR_STATE_WAIT_PIN_REQ:           return("WAIT_PIN_REQ");
+        case BTM_PAIR_STATE_WAIT_LOCAL_PIN:         return("WAIT_LOCAL_PIN");
+        case BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM:   return("WAIT_NUM_CONFIRM");
+        case BTM_PAIR_STATE_KEY_ENTRY:              return("KEY_ENTRY");
+        case BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP:     return("WAIT_LOCAL_OOB_RSP");
+        case BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS:      return("WAIT_LOCAL_IOCAPS");
+        case BTM_PAIR_STATE_INCOMING_SSP:           return("INCOMING_SSP");
+        case BTM_PAIR_STATE_WAIT_AUTH_COMPLETE:     return("WAIT_AUTH_COMPLETE");
+        case BTM_PAIR_STATE_WAIT_DISCONNECT:        return("WAIT_DISCONNECT");
+    }
+
+    return("???");
+#else
+    sprintf(btm_cb.state_temp_buffer,"%hu",state);
+
+    return(btm_cb.state_temp_buffer);
+#endif
+}
+#endif
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_dev_rec_cback_event
+**
+** Description      This function calls the callback function with the given
+**                  result and clear the callback function.
+**
+** Parameters:      void
+**
+*******************************************************************************/
+void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res)
+{
+    tBTM_SEC_CALLBACK   *p_callback = p_dev_rec->p_callback;
+
+    if (p_dev_rec->p_callback)
+    {
+        p_dev_rec->p_callback = NULL;
+
+        (*p_callback) (p_dev_rec->bd_addr, p_dev_rec->p_ref_data, res);
+
+    }
+    btm_sec_check_pending_reqs();
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_queue_mx_request
+**
+** Description      Return state description for tracing
+**
+*******************************************************************************/
+static BOOLEAN btm_sec_queue_mx_request (BD_ADDR bd_addr,  UINT16 psm,  BOOLEAN is_orig,
+                                         UINT32 mx_proto_id, UINT32 mx_chan_id,
+                                         tBTM_SEC_CALLBACK *p_callback, void *p_ref_data)
+{
+    tBTM_SEC_QUEUE_ENTRY    *p_e;
+
+    p_e = (tBTM_SEC_QUEUE_ENTRY *)GKI_getbuf (sizeof(tBTM_SEC_QUEUE_ENTRY));
+
+    if (p_e)
+    {
+        p_e->psm            = psm;
+        p_e->is_orig        = is_orig;
+        p_e->p_callback     = p_callback;
+        p_e->p_ref_data     = p_ref_data;
+        p_e->mx_proto_id    = mx_proto_id;
+        p_e->mx_chan_id     = mx_chan_id;
+
+        memcpy (p_e->bd_addr, bd_addr, BD_ADDR_LEN);
+
+        BTM_TRACE_EVENT4 ("btm_sec_queue_mx_request() PSM: 0x%04x  Is_Orig: %u  mx_proto_id: %u  mx_chan_id: %u",
+                          psm, is_orig, mx_proto_id, mx_chan_id);
+
+        GKI_enqueue (&btm_cb.sec_pending_q, p_e);
+
+        return(TRUE);
+    }
+
+    return(FALSE);
+}
+
+static BOOLEAN btm_sec_check_prefetch_pin (tBTM_SEC_DEV_REC  *p_dev_rec)
+{
+    UINT8 major = (UINT8)(p_dev_rec->dev_class[1] & BTM_COD_MAJOR_CLASS_MASK);
+    UINT8 minor = (UINT8)(p_dev_rec->dev_class[2] & BTM_COD_MINOR_CLASS_MASK);
+    BOOLEAN rv = FALSE;
+
+    if ((major == BTM_COD_MAJOR_AUDIO)
+        &&  ((minor == BTM_COD_MINOR_CONFM_HANDSFREE) || (minor == BTM_COD_MINOR_CAR_AUDIO)) )
+    {
+        BTM_TRACE_EVENT2 ("btm_sec_check_prefetch_pin: Skipping pre-fetch PIN for carkit COD Major: 0x%02x Minor: 0x%02x", major, minor);
+
+        if (btm_cb.security_mode_changed == FALSE)
+        {
+            btm_cb.security_mode_changed = TRUE;
+#ifdef APPL_AUTH_WRITE_EXCEPTION
+            if(!(APPL_AUTH_WRITE_EXCEPTION)(p_dev_rec->bd_addr))
+#endif
+                btsnd_hcic_write_auth_enable (TRUE);
+        }
+    }
+    else
+    {
+        btm_sec_change_pairing_state (BTM_PAIR_STATE_WAIT_LOCAL_PIN);
+
+        /* If we got a PIN, use that, else try to get one */
+        if (btm_cb.pin_code_len)
+        {
+            BTM_PINCodeReply (p_dev_rec->bd_addr, BTM_SUCCESS, btm_cb.pin_code_len, btm_cb.pin_code, p_dev_rec->trusted_mask);
+        }
+        else
+        {
+            /* pin was not supplied - pre-fetch pin code now */
+            if (btm_cb.api.p_pin_callback && ((btm_cb.pairing_flags & BTM_PAIR_FLAGS_PIN_REQD) == 0))
+            {
+                BTM_TRACE_DEBUG0("btm_sec_check_prefetch_pin: PIN code callback called");
+                if (btm_bda_to_acl(p_dev_rec->bd_addr) == NULL)
+                btm_cb.pairing_flags |= BTM_PAIR_FLAGS_PIN_REQD;
+                (btm_cb.api.p_pin_callback) (p_dev_rec->bd_addr, p_dev_rec->dev_class, p_dev_rec->sec_bd_name);
+            }
+        }
+
+        rv = TRUE;
+    }
+
+    return rv;
+}
+
+#if (BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btm_sec_clear_ble_keys
+**
+** Description      This function is called to clear out the BLE keys.
+**                  Typically when devices are removed in BTM_SecDeleteDevice,
+**                  or when a new BT Link key is generated.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC  *p_dev_rec)
+{
+
+    BTM_TRACE_DEBUG0 ("btm_sec_clear_ble_keys: Clearing BLE Keys");
+#if (SMP_INCLUDED== TRUE)
+    p_dev_rec->ble.key_type = 0;
+    memset (&p_dev_rec->ble.keys, 0, sizeof(tBTM_SEC_BLE_KEYS));
+#endif
+    gatt_delete_dev_from_srv_chg_clt_list(p_dev_rec->bd_addr);
+}
+
+
+/*******************************************************************************
+**
+** Function         btm_sec_is_a_bonded_dev
+**
+** Description       Is the specified device is a bonded device
+**
+** Returns          TRUE - dev is bonded
+**
+*******************************************************************************/
+BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda)
+{
+
+    tBTM_SEC_DEV_REC *p_dev_rec= btm_find_dev (bda);
+    BOOLEAN is_bonded= FALSE;
+
+#if (SMP_INCLUDED== TRUE)
+    if (p_dev_rec && (p_dev_rec->ble.key_type || (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN)))
+    {
+        is_bonded = TRUE;
+    }
+#endif
+    BTM_TRACE_DEBUG1 ("btm_sec_is_a_bonded_dev is_bonded=%d", is_bonded);
+    return(is_bonded);
+}
+
+/*******************************************************************************
+**
+** Function         btm_sec_find_bonded_dev
+**
+** Description      Find a bonded device starting from the specified index
+**
+** Returns          TRUE - found a bonded device
+**
+*******************************************************************************/
+BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC *p_rec)
+{
+    BOOLEAN found= FALSE;
+
+#if (SMP_INCLUDED== TRUE)
+    tBTM_SEC_DEV_REC *p_dev_rec;
+    int i;
+    if (start_idx >= BTM_SEC_MAX_DEVICE_RECORDS)
+    {
+        BTM_TRACE_DEBUG0 ("LE bonded device not found");
+        return found;
+    }
+
+    p_dev_rec = &btm_cb.sec_dev_rec[start_idx];
+    for (i = start_idx; i < BTM_SEC_MAX_DEVICE_RECORDS; i++, p_dev_rec++)
+    {
+        if (p_dev_rec->ble.key_type || (p_dev_rec->sec_flags & BTM_SEC_LINK_KEY_KNOWN))
+        {
+            *p_found_idx = i;
+            p_rec = p_dev_rec;
+            break;
+        }
+    }
+    BTM_TRACE_DEBUG1 ("btm_sec_find_bonded_dev=%d", found);
+#endif
+    return(found);
+}
+#endif /* BLE_INCLUDED */
+
diff --git a/stack/btu/btu_hcif.c b/stack/btu/btu_hcif.c
new file mode 100644
index 0000000..8ca9d35
--- /dev/null
+++ b/stack/btu/btu_hcif.c
@@ -0,0 +1,2257 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that interface with the HCI transport. On
+ *  the receive side, it routes events to the appropriate handler, e.g.
+ *  L2CAP, ScoMgr. On the transmit side, it manages the command
+ *  transmission.
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "btu.h"
+#include "l2c_int.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+// btla-specific ++
+#define LOG_TAG "BTLD"
+#if (defined(ANDROID_APP_INCLUDED) && (ANDROID_APP_INCLUDED == TRUE) && (!defined(LINUX_NATIVE)) )
+#include <cutils/log.h>
+#else
+#define LOGV(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#define LOGE(format, ...)  fprintf (stderr, LOG_TAG format"\n", ## __VA_ARGS__)
+#define LOGI(format, ...)  fprintf (stdout, LOG_TAG format"\n", ## __VA_ARGS__)
+#endif
+
+// btla-specific ++
+/* BTE application task */
+#if APPL_INCLUDED == TRUE
+#include "bte_appl.h"
+#endif
+// btla-specific --
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void btu_hcif_inquiry_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_inquiry_result_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p, UINT16 evt_len);
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+static void btu_hcif_extended_inquiry_result_evt (UINT8 *p, UINT16 evt_len);
+#endif
+
+static void btu_hcif_connection_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_connection_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_disconnection_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_authentication_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_encryption_change_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_change_conn_link_key_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_master_link_key_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_qos_setup_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_command_complete_evt (UINT8 controller_id, UINT8 *p, UINT16 evt_len);
+static void btu_hcif_command_status_evt (UINT8 controller_id, UINT8 *p, UINT16 evt_len);
+static void btu_hcif_hardware_error_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_flush_occured_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_role_change_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_mode_change_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_return_link_keys_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_pin_code_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_link_key_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_link_key_notification_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_loopback_command_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_data_buf_overflow_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_max_slots_changed_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_read_clock_off_comp_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_conn_pkt_type_change_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_qos_violation_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_page_scan_mode_change_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_page_scan_rep_mode_chng_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_esco_connection_comp_evt(UINT8 *p, UINT16 evt_len);
+static void btu_hcif_esco_connection_chg_evt(UINT8 *p, UINT16 evt_len);
+
+/* Simple Pairing Events */
+static void btu_hcif_host_support_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_io_cap_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_io_cap_response_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_user_conf_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_user_passkey_request_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_user_passkey_notif_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_keypress_notif_evt (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_link_super_tout_evt (UINT8 *p, UINT16 evt_len);
+
+    #if BTM_OOB_INCLUDED == TRUE
+static void btu_hcif_rem_oob_request_evt (UINT8 *p, UINT16 evt_len);
+    #endif
+
+static void btu_hcif_simple_pair_complete_evt (UINT8 *p, UINT16 evt_len);
+    #if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+static void btu_hcif_enhanced_flush_complete_evt (UINT8 *p, UINT16 evt_len);
+    #endif
+
+    #if (BTM_SSR_INCLUDED == TRUE)
+static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len);
+    #endif /* BTM_SSR_INCLUDED == TRUE */
+
+    #if (HID_DEV_INCLUDED == TRUE) && (HID_DEV_PM_INCLUDED == TRUE)
+extern void hidd_pm_proc_mode_change( UINT8 hci_status, UINT8 mode, UINT16 interval );
+    #endif
+
+
+    #if BLE_INCLUDED == TRUE
+static void btu_ble_ll_conn_complete_evt (UINT8 *p, UINT16 evt_len);
+static void btu_ble_process_adv_pkt (UINT8 *p, UINT16 evt_len);
+static void btu_ble_read_remote_feat_evt (UINT8 *p, UINT16 evt_len);
+static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len);
+static void btu_ble_proc_ltk_req (UINT8 *p, UINT16 evt_len);
+static void btu_hcif_encyption_key_refresh_cmpl_evt (UINT8 *p, UINT16 evt_len);
+    #endif
+/*******************************************************************************
+**
+** Function         btu_hcif_store_cmd
+**
+** Description      This function stores a copy of an outgoing command and
+**                  and sets a timer waiting for a event in response to the
+**                  command.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_store_cmd (UINT8 controller_id, BT_HDR *p_buf)
+{
+    tHCI_CMD_CB * p_hci_cmd_cb = &(btu_cb.hci_cmd_cb[controller_id]);
+    UINT16  opcode;
+    BT_HDR  *p_cmd;
+    UINT8   *p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* get command opcode */
+    STREAM_TO_UINT16 (opcode, p);
+
+    /* don't do anything for certain commands */
+    if ((opcode == HCI_RESET) || (opcode == HCI_HOST_NUM_PACKETS_DONE))
+    {
+        return;
+    }
+
+    /* allocate buffer (HCI_GET_CMD_BUF will either get a buffer from HCI_CMD_POOL or from 'best-fit' pool) */
+    if ((p_cmd = HCI_GET_CMD_BUF(p_buf->len + p_buf->offset - HCIC_PREAMBLE_SIZE)) == NULL)
+    {
+        return;
+    }
+
+    /* copy buffer */
+    memcpy (p_cmd, p_buf, sizeof(BT_HDR));
+
+    /* If vendor specific save the callback function */
+    if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC
+#if BLE_INCLUDED == TRUE
+        || (opcode == HCI_BLE_RAND )
+        || (opcode == HCI_BLE_ENCRYPT)
+#endif
+       )
+    {
+#if 0
+        BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_DEBUG,
+                    "Storing VSC callback opcode=0x%04x, Callback function=0x%07x",
+                    opcode, *(UINT32 *)(p_buf + 1));
+#endif
+        memcpy ((UINT8 *)(p_cmd + 1), (UINT8 *)(p_buf + 1), sizeof(void *));
+    }
+
+    memcpy ((UINT8 *)(p_cmd + 1) + p_cmd->offset,
+            (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len);
+
+    /* queue copy of cmd */
+    GKI_enqueue(&(p_hci_cmd_cb->cmd_cmpl_q), p_cmd);
+
+    /* start timer */
+    if (BTU_CMD_CMPL_TIMEOUT > 0)
+    {
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+        p_hci_cmd_cb->checked_hcisu = FALSE;
+#endif
+        btu_start_timer (&(p_hci_cmd_cb->cmd_cmpl_timer),
+                         (UINT16)(BTU_TTYPE_BTU_CMD_CMPL + controller_id),
+                         BTU_CMD_CMPL_TIMEOUT);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_process_event
+**
+** Description      This function is called when an event is received from
+**                  the Host Controller.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_hcif_process_event (UINT8 controller_id, BT_HDR *p_msg)
+{
+    UINT8   *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
+    UINT8   hci_evt_code, hci_evt_len;
+#if BLE_INCLUDED == TRUE
+    UINT8   ble_sub_code;
+#endif
+    STREAM_TO_UINT8  (hci_evt_code, p);
+    STREAM_TO_UINT8  (hci_evt_len, p);
+
+    switch (hci_evt_code)
+    {
+        case HCI_INQUIRY_COMP_EVT:
+            btu_hcif_inquiry_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_INQUIRY_RESULT_EVT:
+            btu_hcif_inquiry_result_evt (p, hci_evt_len);
+            break;
+        case HCI_INQUIRY_RSSI_RESULT_EVT:
+            btu_hcif_inquiry_rssi_result_evt (p, hci_evt_len);
+            break;
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+        case HCI_EXTENDED_INQUIRY_RESULT_EVT:
+            btu_hcif_extended_inquiry_result_evt (p, hci_evt_len);
+            break;
+#endif
+        case HCI_CONNECTION_COMP_EVT:
+            btu_hcif_connection_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_CONNECTION_REQUEST_EVT:
+            btu_hcif_connection_request_evt (p, hci_evt_len);
+            break;
+        case HCI_DISCONNECTION_COMP_EVT:
+            btu_hcif_disconnection_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_AUTHENTICATION_COMP_EVT:
+            btu_hcif_authentication_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_RMT_NAME_REQUEST_COMP_EVT:
+            btu_hcif_rmt_name_request_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_ENCRYPTION_CHANGE_EVT:
+            btu_hcif_encryption_change_evt (p, hci_evt_len);
+            break;
+#if BLE_INCLUDED == TRUE
+        case HCI_ENCRYPTION_KEY_REFRESH_COMP_EVT:
+            btu_hcif_encyption_key_refresh_cmpl_evt(p, hci_evt_len);
+            break;
+#endif
+        case HCI_CHANGE_CONN_LINK_KEY_EVT:
+            btu_hcif_change_conn_link_key_evt (p, hci_evt_len);
+            break;
+        case HCI_MASTER_LINK_KEY_COMP_EVT:
+            btu_hcif_master_link_key_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_READ_RMT_FEATURES_COMP_EVT:
+            btu_hcif_read_rmt_features_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_READ_RMT_EXT_FEATURES_COMP_EVT:
+            btu_hcif_read_rmt_ext_features_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_READ_RMT_VERSION_COMP_EVT:
+            btu_hcif_read_rmt_version_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_QOS_SETUP_COMP_EVT:
+            btu_hcif_qos_setup_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_COMMAND_COMPLETE_EVT:
+            btu_hcif_command_complete_evt (controller_id, p, hci_evt_len);
+            break;
+        case HCI_COMMAND_STATUS_EVT:
+            btu_hcif_command_status_evt (controller_id, p, hci_evt_len);
+            break;
+        case HCI_HARDWARE_ERROR_EVT:
+            btu_hcif_hardware_error_evt (p, hci_evt_len);
+            break;
+        case HCI_FLUSH_OCCURED_EVT:
+            btu_hcif_flush_occured_evt (p, hci_evt_len);
+            break;
+        case HCI_ROLE_CHANGE_EVT:
+            btu_hcif_role_change_evt (p, hci_evt_len);
+            break;
+        case HCI_NUM_COMPL_DATA_PKTS_EVT:
+            btu_hcif_num_compl_data_pkts_evt (p, hci_evt_len);
+            break;
+        case HCI_MODE_CHANGE_EVT:
+            btu_hcif_mode_change_evt (p, hci_evt_len);
+            break;
+        case HCI_RETURN_LINK_KEYS_EVT:
+            btu_hcif_return_link_keys_evt (p, hci_evt_len);
+            break;
+        case HCI_PIN_CODE_REQUEST_EVT:
+            btu_hcif_pin_code_request_evt (p, hci_evt_len);
+            break;
+        case HCI_LINK_KEY_REQUEST_EVT:
+            btu_hcif_link_key_request_evt (p, hci_evt_len);
+            break;
+        case HCI_LINK_KEY_NOTIFICATION_EVT:
+            btu_hcif_link_key_notification_evt (p, hci_evt_len);
+            break;
+        case HCI_LOOPBACK_COMMAND_EVT:
+            btu_hcif_loopback_command_evt (p, hci_evt_len);
+            break;
+        case HCI_DATA_BUF_OVERFLOW_EVT:
+            btu_hcif_data_buf_overflow_evt (p, hci_evt_len);
+            break;
+        case HCI_MAX_SLOTS_CHANGED_EVT:
+            btu_hcif_max_slots_changed_evt (p, hci_evt_len);
+            break;
+        case HCI_READ_CLOCK_OFF_COMP_EVT:
+            btu_hcif_read_clock_off_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_CONN_PKT_TYPE_CHANGE_EVT:
+            btu_hcif_conn_pkt_type_change_evt (p, hci_evt_len);
+            break;
+        case HCI_QOS_VIOLATION_EVT:
+            btu_hcif_qos_violation_evt (p, hci_evt_len);
+            break;
+        case HCI_PAGE_SCAN_MODE_CHANGE_EVT:
+            btu_hcif_page_scan_mode_change_evt (p, hci_evt_len);
+            break;
+        case HCI_PAGE_SCAN_REP_MODE_CHNG_EVT:
+            btu_hcif_page_scan_rep_mode_chng_evt (p, hci_evt_len);
+            break;
+        case HCI_ESCO_CONNECTION_COMP_EVT:
+            btu_hcif_esco_connection_comp_evt (p, hci_evt_len);
+            break;
+        case HCI_ESCO_CONNECTION_CHANGED_EVT:
+            btu_hcif_esco_connection_chg_evt (p, hci_evt_len);
+            break;
+#if (BTM_SSR_INCLUDED == TRUE)
+        case HCI_SNIFF_SUB_RATE_EVT:
+            btu_hcif_ssr_evt (p, hci_evt_len);
+            break;
+#endif  /* BTM_SSR_INCLUDED == TRUE */
+        case HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT:
+            btu_hcif_host_support_evt (p, hci_evt_len);
+            break;
+        case HCI_IO_CAPABILITY_REQUEST_EVT:
+            btu_hcif_io_cap_request_evt (p, hci_evt_len);
+            break;
+        case HCI_IO_CAPABILITY_RESPONSE_EVT:
+            btu_hcif_io_cap_response_evt (p, hci_evt_len);
+            break;
+        case HCI_USER_CONFIRMATION_REQUEST_EVT:
+            btu_hcif_user_conf_request_evt (p, hci_evt_len);
+            break;
+        case HCI_USER_PASSKEY_REQUEST_EVT:
+            btu_hcif_user_passkey_request_evt (p, hci_evt_len);
+            break;
+#if BTM_OOB_INCLUDED == TRUE
+        case HCI_REMOTE_OOB_DATA_REQUEST_EVT:
+            btu_hcif_rem_oob_request_evt (p, hci_evt_len);
+            break;
+#endif
+        case HCI_SIMPLE_PAIRING_COMPLETE_EVT:
+            btu_hcif_simple_pair_complete_evt (p, hci_evt_len);
+            break;
+        case HCI_USER_PASSKEY_NOTIFY_EVT:
+            btu_hcif_user_passkey_notif_evt (p, hci_evt_len);
+            break;
+        case HCI_KEYPRESS_NOTIFY_EVT:
+            btu_hcif_keypress_notif_evt (p, hci_evt_len);
+            break;
+        case HCI_LINK_SUPER_TOUT_CHANGED_EVT:
+            btu_hcif_link_super_tout_evt (p, hci_evt_len);
+            break;
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+        case HCI_ENHANCED_FLUSH_COMPLETE_EVT:
+            btu_hcif_enhanced_flush_complete_evt (p, hci_evt_len);
+            break;
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+        case HCI_BLE_EVENT:
+            STREAM_TO_UINT8  (ble_sub_code, p);
+
+            BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_EVENT, "BLE HCI(id=%d) event = 0x%02x)",
+                        hci_evt_code,  ble_sub_code);
+
+            switch (ble_sub_code)
+            {
+                case HCI_BLE_ADV_PKT_RPT_EVT: /* result of inquiry */
+                    btu_ble_process_adv_pkt(p, hci_evt_len);
+                    break;
+                case HCI_BLE_CONN_COMPLETE_EVT:
+                    btu_ble_ll_conn_complete_evt(p, hci_evt_len);
+                    break;
+                case HCI_BLE_LL_CONN_PARAM_UPD_EVT:
+                    btu_ble_ll_conn_param_upd_evt(p, hci_evt_len);
+                    break;
+                case HCI_BLE_READ_REMOTE_FEAT_CMPL_EVT:
+                    btu_ble_read_remote_feat_evt(p, hci_evt_len);
+                    break;
+                case HCI_BLE_LTK_REQ_EVT: /* received only at slave device */
+                    btu_ble_proc_ltk_req(p, hci_evt_len);
+                    break;
+            }
+            break;
+#endif /* BLE_INCLUDED */
+        case HCI_VENDOR_SPECIFIC_EVT:
+                btm_vendor_specific_evt (p, hci_evt_len);
+            break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_send_cmd
+**
+** Description      This function is called to check if it can send commands
+**                  to the Host Controller. It may be passed the address of
+**                  a packet to send.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_hcif_send_cmd (UINT8 controller_id, BT_HDR *p_buf)
+{
+    tHCI_CMD_CB * p_hci_cmd_cb = &(btu_cb.hci_cmd_cb[controller_id]);
+
+#if ((L2CAP_HOST_FLOW_CTRL == TRUE)||defined(HCI_TESTER))
+    UINT8 *pp;
+    UINT16 code;
+#endif
+
+    /* If there are already commands in the queue, then enqueue this command */
+    if ((p_buf) && (p_hci_cmd_cb->cmd_xmit_q.count))
+    {
+        GKI_enqueue (&(p_hci_cmd_cb->cmd_xmit_q), p_buf);
+        p_buf = NULL;
+    }
+
+    /* Allow for startup case, where no acks may be received */
+    if ( ((controller_id == LOCAL_BR_EDR_CONTROLLER_ID)
+         && (p_hci_cmd_cb->cmd_window == 0)
+         && (btm_cb.devcb.state == BTM_DEV_STATE_WAIT_RESET_CMPLT)) )
+    {
+        p_hci_cmd_cb->cmd_window = p_hci_cmd_cb->cmd_xmit_q.count + 1;
+    }
+
+    /* See if we can send anything */
+    while (p_hci_cmd_cb->cmd_window != 0)
+    {
+        if (!p_buf)
+            p_buf = (BT_HDR *)GKI_dequeue (&(p_hci_cmd_cb->cmd_xmit_q));
+
+        if (p_buf)
+        {
+            btu_hcif_store_cmd(controller_id, p_buf);
+
+#if ((L2CAP_HOST_FLOW_CTRL == TRUE)||defined(HCI_TESTER))
+            pp = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+            STREAM_TO_UINT16 (code, pp);
+
+            /*
+             * We do not need to decrease window for host flow control,
+             * host flow control does not receive an event back from controller
+             */
+            if (code != HCI_HOST_NUM_PACKETS_DONE)
+#endif
+                p_hci_cmd_cb->cmd_window--;
+
+            if (controller_id == LOCAL_BR_EDR_CONTROLLER_ID)
+            {
+                HCI_CMD_TO_LOWER(p_buf);
+            }
+            else
+            {
+                /* Unknown controller */
+                BT_TRACE_1 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING, "BTU HCI(ctrl id=%d) controller ID not recognized", controller_id);
+                GKI_freebuf(p_buf);;
+            }
+
+            p_buf = NULL;
+        }
+        else
+            break;
+    }
+
+    if (p_buf)
+        GKI_enqueue (&(p_hci_cmd_cb->cmd_xmit_q), p_buf);
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+    if (controller_id == LOCAL_BR_EDR_CONTROLLER_ID)
+    {
+        /* check if controller can go to sleep */
+        btu_check_bt_sleep ();
+    }
+#endif
+
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_send_host_rdy_for_data
+**
+** Description      This function is called to check if it can send commands
+**                  to the Host Controller. It may be passed the address of
+**                  a packet to send.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_hcif_send_host_rdy_for_data(void)
+{
+    UINT16      num_pkts[MAX_L2CAP_LINKS + 4];      /* 3 SCO connections */
+    UINT16      handles[MAX_L2CAP_LINKS + 4];
+    UINT8       num_ents;
+
+    /* Get the L2CAP numbers */
+    num_ents = l2c_link_pkts_rcvd (num_pkts, handles);
+
+    /* Get the SCO numbers */
+    /* No SCO for now ?? */
+
+    if (num_ents)
+    {
+        btsnd_hcic_host_num_xmitted_pkts (num_ents, handles, num_pkts);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_inquiry_comp_evt
+**
+** Description      Process event HCI_INQUIRY_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_inquiry_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+
+    STREAM_TO_UINT8    (status, p);
+
+    /* Tell inquiry processing that we are done */
+    btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_inquiry_result_evt
+**
+** Description      Process event HCI_INQUIRY_RESULT_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_inquiry_result_evt (UINT8 *p, UINT16 evt_len)
+{
+    /* Store results in the cache */
+    btm_process_inq_results (p, BTM_INQ_RESULT_STANDARD);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_inquiry_rssi_result_evt
+**
+** Description      Process event HCI_INQUIRY_RSSI_RESULT_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_inquiry_rssi_result_evt (UINT8 *p, UINT16 evt_len)
+{
+    /* Store results in the cache */
+    btm_process_inq_results (p, BTM_INQ_RESULT_WITH_RSSI);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_extended_inquiry_result_evt
+**
+** Description      Process event HCI_EXTENDED_INQUIRY_RESULT_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+static void btu_hcif_extended_inquiry_result_evt (UINT8 *p, UINT16 evt_len)
+{
+    /* Store results in the cache */
+    btm_process_inq_results (p, BTM_INQ_RESULT_EXTENDED);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         btu_hcif_connection_comp_evt
+**
+** Description      Process event HCI_CONNECTION_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_connection_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT16      handle;
+    BD_ADDR     bda;
+    UINT8       link_type;
+    UINT8       enc_mode;
+#if BTM_SCO_INCLUDED == TRUE
+    tBTM_ESCO_DATA  esco_data;
+#endif
+
+    STREAM_TO_UINT8    (status, p);
+    STREAM_TO_UINT16   (handle, p);
+    STREAM_TO_BDADDR   (bda, p);
+    STREAM_TO_UINT8    (link_type, p);
+    STREAM_TO_UINT8    (enc_mode, p);
+
+    handle = HCID_GET_HANDLE (handle);
+
+    if (link_type == HCI_LINK_TYPE_ACL)
+    {
+        btm_sec_connected (bda, handle, status, enc_mode);
+
+        l2c_link_hci_conn_comp (status, handle, bda);
+    }
+#if BTM_SCO_INCLUDED == TRUE
+    else
+    {
+        memset(&esco_data, 0, sizeof(tBTM_ESCO_DATA));
+        /* esco_data.link_type = HCI_LINK_TYPE_SCO; already zero */
+        memcpy (esco_data.bd_addr, bda, BD_ADDR_LEN);
+        btm_sco_connected (status, bda, handle, &esco_data);
+    }
+#endif /* BTM_SCO_INCLUDED */
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_connection_request_evt
+**
+** Description      Process event HCI_CONNECTION_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_connection_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    BD_ADDR     bda;
+    DEV_CLASS   dc;
+    UINT8       link_type;
+
+    STREAM_TO_BDADDR   (bda, p);
+    STREAM_TO_DEVCLASS (dc, p);
+    STREAM_TO_UINT8    (link_type, p);
+
+    /* Pass request to security manager to check connect filters before */
+    /* passing request to l2cap */
+    if (link_type == HCI_LINK_TYPE_ACL)
+    {
+        btm_sec_conn_req (bda, dc);
+    }
+#if BTM_SCO_INCLUDED == TRUE
+    else
+    {
+        btm_sco_conn_req (bda, dc, link_type);
+    }
+#endif /* BTM_SCO_INCLUDED */
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_disconnection_comp_evt
+**
+** Description      Process event HCI_DISCONNECTION_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_disconnection_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+    UINT8   reason;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT8  (reason, p);
+
+    handle = HCID_GET_HANDLE (handle);
+
+#if BTM_SCO_INCLUDED == TRUE
+    /* If L2CAP doesn't know about it, send it to SCO */
+    if (!l2c_link_hci_disc_comp (handle, reason))
+        btm_sco_removed (handle, reason);
+#else
+    l2c_link_hci_disc_comp (handle, reason);
+#endif /* BTM_SCO_INCLUDED */
+
+    /* Notify security manager */
+    btm_sec_disconnected (handle, reason);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_authentication_comp_evt
+**
+** Description      Process event HCI_AUTHENTICATION_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_authentication_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+
+    btm_sec_auth_complete (handle, status);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_rmt_name_request_comp_evt
+**
+** Description      Process event HCI_RMT_NAME_REQUEST_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_rmt_name_request_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    BD_ADDR bd_addr;
+
+    STREAM_TO_UINT8 (status, p);
+    STREAM_TO_BDADDR (bd_addr, p);
+
+    evt_len -= (1 + BD_ADDR_LEN);
+
+    btm_process_remote_name (bd_addr, p, evt_len, status);
+
+    btm_sec_rmt_name_request_complete (bd_addr, p, status);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_encryption_change_evt
+**
+** Description      Process event HCI_ENCRYPTION_CHANGE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_encryption_change_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+    UINT8   encr_enable;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT8  (encr_enable, p);
+
+    btm_acl_encrypt_change (handle, status, encr_enable);
+    btm_sec_encrypt_change (handle, status, encr_enable);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_change_conn_link_key_evt
+**
+** Description      Process event HCI_CHANGE_CONN_LINK_KEY_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_change_conn_link_key_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+
+    btm_acl_link_key_change (handle, status);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_master_link_key_comp_evt
+**
+** Description      Process event HCI_MASTER_LINK_KEY_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_master_link_key_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+    UINT8   key_flg;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT8  (key_flg, p);
+
+    btm_sec_mkey_comp_event (handle, status, key_flg);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_read_rmt_features_comp_evt
+**
+** Description      Process event HCI_READ_RMT_FEATURES_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_read_rmt_features_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_read_remote_features_complete(p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_read_rmt_ext_features_comp_evt
+**
+** Description      Process event HCI_READ_RMT_EXT_FEATURES_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_read_rmt_ext_features_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    /* Status is in first byte of stream */
+    if (*p == HCI_SUCCESS)
+        btm_read_remote_ext_features_complete(p);
+    else
+        btm_read_remote_ext_features_failed(*p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_read_rmt_version_comp_evt
+**
+** Description      Process event HCI_READ_RMT_VERSION_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_read_rmt_version_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_read_remote_version_complete (p);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_qos_setup_comp_evt
+**
+** Description      Process event HCI_QOS_SETUP_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_qos_setup_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8 status;
+    UINT16 handle;
+    FLOW_SPEC flow;
+
+    STREAM_TO_UINT8 (status, p);
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT8 (flow.qos_flags, p);
+    STREAM_TO_UINT8 (flow.service_type, p);
+    STREAM_TO_UINT32 (flow.token_rate, p);
+    STREAM_TO_UINT32 (flow.peak_bandwidth, p);
+    STREAM_TO_UINT32 (flow.latency, p);
+    STREAM_TO_UINT32 (flow.delay_variation, p);
+
+    btm_qos_setup_complete(status, handle, &flow);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_esco_connection_comp_evt
+**
+** Description      Process event HCI_ESCO_CONNECTION_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_esco_connection_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+#if BTM_SCO_INCLUDED == TRUE
+    tBTM_ESCO_DATA  data;
+    UINT16          handle;
+    BD_ADDR         bda;
+    UINT8           status;
+
+    STREAM_TO_UINT8 (status, p);
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_BDADDR (bda, p);
+
+    STREAM_TO_UINT8 (data.link_type, p);
+    STREAM_TO_UINT8 (data.tx_interval, p);
+    STREAM_TO_UINT8 (data.retrans_window, p);
+    STREAM_TO_UINT16 (data.rx_pkt_len, p);
+    STREAM_TO_UINT16 (data.tx_pkt_len, p);
+    STREAM_TO_UINT8 (data.air_mode, p);
+
+    memcpy (data.bd_addr, bda, BD_ADDR_LEN);
+    btm_sco_connected (status, bda, handle, &data);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_esco_connection_chg_evt
+**
+** Description      Process event HCI_ESCO_CONNECTION_CHANGED_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_esco_connection_chg_evt (UINT8 *p, UINT16 evt_len)
+{
+#if BTM_SCO_INCLUDED == TRUE
+    UINT16  handle;
+    UINT16  tx_pkt_len;
+    UINT16  rx_pkt_len;
+    UINT8   status;
+    UINT8   tx_interval;
+    UINT8   retrans_window;
+
+    STREAM_TO_UINT8 (status, p);
+    STREAM_TO_UINT16 (handle, p);
+
+    STREAM_TO_UINT8 (tx_interval, p);
+    STREAM_TO_UINT8 (retrans_window, p);
+    STREAM_TO_UINT16 (rx_pkt_len, p);
+    STREAM_TO_UINT16 (tx_pkt_len, p);
+
+    btm_esco_proc_conn_chg (status, handle, tx_interval, retrans_window,
+                            rx_pkt_len, tx_pkt_len);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_hdl_command_complete
+**
+** Description      Handle command complete event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_hdl_command_complete (UINT16 opcode, UINT8 *p, UINT16 evt_len,
+                                           void *p_cplt_cback, UINT8 ctr_id)
+{
+    switch (opcode)
+    {
+        case HCI_RESET:
+            btm_reset_complete ();  /* BR/EDR */
+            break;
+
+        case HCI_INQUIRY_CANCEL:
+            /* Tell inquiry processing that we are done */
+            btm_process_cancel_complete(HCI_SUCCESS, BTM_BR_INQUIRY_MASK);
+            break;
+        case HCI_SET_EVENT_FILTER:
+            btm_event_filter_complete (p);
+            break;
+
+        case HCI_READ_STORED_LINK_KEY:
+            btm_read_stored_link_key_complete (p);
+            break;
+
+        case HCI_WRITE_STORED_LINK_KEY:
+            btm_write_stored_link_key_complete (p);
+            break;
+
+        case HCI_DELETE_STORED_LINK_KEY:
+            btm_delete_stored_link_key_complete (p);
+            break;
+
+        case HCI_READ_LOCAL_VERSION_INFO:
+            btm_read_local_version_complete (p, evt_len);
+            break;
+
+        case HCI_READ_POLICY_SETTINGS:
+            btm_read_link_policy_complete (p);
+            break;
+
+        case HCI_READ_BUFFER_SIZE:
+            btm_read_hci_buf_size_complete (p, evt_len);
+            break;
+
+        case HCI_READ_LOCAL_FEATURES:
+            btm_read_local_features_complete (p, evt_len);
+            break;
+
+        case HCI_READ_LOCAL_NAME:
+            btm_read_local_name_complete (p, evt_len);
+            break;
+
+        case HCI_READ_BD_ADDR:
+            btm_read_local_addr_complete (p, evt_len);
+            break;
+
+        case HCI_GET_LINK_QUALITY:
+            btm_read_link_quality_complete (p);
+            break;
+
+        case HCI_READ_RSSI:
+            btm_read_rssi_complete (p);
+            break;
+
+        case HCI_READ_TRANSMIT_POWER_LEVEL:
+            btm_read_tx_power_complete(p, FALSE);
+            break;
+
+        case HCI_CREATE_CONNECTION_CANCEL:
+            btm_create_conn_cancel_complete(p);
+            break;
+
+        case HCI_READ_LOCAL_OOB_DATA:
+#if BTM_OOB_INCLUDED == TRUE
+            btm_read_local_oob_complete(p);
+#endif
+            break;
+
+
+        case HCI_READ_INQ_TX_POWER_LEVEL:
+            btm_read_linq_tx_power_complete (p);
+            break;
+
+#if (BLE_INCLUDED == TRUE)
+/* BLE Commands */
+        case HCI_BLE_READ_WHITE_LIST_SIZE :
+            btm_read_white_list_size_complete(p, evt_len);
+            break;
+
+        case HCI_BLE_ADD_WHITE_LIST:
+            btm_ble_add_2_white_list_complete(p, evt_len);
+            break;
+
+        case HCI_BLE_CLEAR_WHITE_LIST:
+            btm_ble_clear_white_list_complete(p, evt_len);
+            break;
+
+        case HCI_BLE_REMOVE_WHITE_LIST:
+            btm_ble_remove_from_white_list_complete(p, evt_len);
+            break;
+
+        case HCI_BLE_RAND:
+        case HCI_BLE_ENCRYPT:
+
+            btm_ble_rand_enc_complete (p, opcode, (tBTM_RAND_ENC_CB *)p_cplt_cback);
+            break;
+        case HCI_BLE_READ_BUFFER_SIZE:
+            btm_read_ble_buf_size_complete(p, evt_len);
+            break;
+
+        case HCI_BLE_READ_ADV_CHNL_TX_POWER:
+            btm_read_tx_power_complete(p, TRUE);
+            break;
+
+        case HCI_BLE_WRITE_ADV_ENABLE:
+            btm_ble_write_adv_enable_complete(p);
+            break;
+
+#endif /* (BLE_INCLUDED == TRUE) */
+
+        default:
+            if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC)
+                btm_vsc_complete (p, opcode, evt_len, (tBTM_CMPL_CB *)p_cplt_cback);
+            break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_command_complete_evt
+**
+** Description      Process event HCI_COMMAND_COMPLETE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_command_complete_evt (UINT8 controller_id, UINT8 *p, UINT16 evt_len)
+{
+    tHCI_CMD_CB *p_hci_cmd_cb = &(btu_cb.hci_cmd_cb[controller_id]);
+    UINT16      cc_opcode;
+    BT_HDR      *p_cmd;
+    void        *p_cplt_cback = NULL;
+
+    STREAM_TO_UINT8  (p_hci_cmd_cb->cmd_window, p);
+
+#if (defined(HCI_MAX_SIMUL_CMDS) && (HCI_MAX_SIMUL_CMDS > 0))
+    if (p_hci_cmd_cb->cmd_window > HCI_MAX_SIMUL_CMDS)
+        p_hci_cmd_cb->cmd_window = HCI_MAX_SIMUL_CMDS;
+#endif
+
+    STREAM_TO_UINT16 (cc_opcode, p);
+
+    evt_len -= 3;
+
+    /* only do this for certain commands */
+    if ((cc_opcode != HCI_RESET) && (cc_opcode != HCI_HOST_NUM_PACKETS_DONE) &&
+        (cc_opcode != HCI_COMMAND_NONE))
+    {
+        /* dequeue and free stored command */
+
+/* always use cmd code check, when one cmd timeout waiting for cmd_cmpl,
+   it'll cause the rest of the command goes in wrong order                  */
+        p_cmd = (BT_HDR *) GKI_getfirst (&p_hci_cmd_cb->cmd_cmpl_q);
+
+        while (p_cmd)
+        {
+            UINT16 opcode_dequeued;
+            UINT8  *p_dequeued;
+
+            /* Make sure dequeued command is for the command_cplt received */
+            p_dequeued = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+            STREAM_TO_UINT16 (opcode_dequeued, p_dequeued);
+
+            if (opcode_dequeued != cc_opcode)
+            {
+                /* opcode does not match, check next command in the queue */
+                p_cmd = (BT_HDR *) GKI_getnext(p_cmd);
+                continue;
+            }
+            GKI_remove_from_queue(&p_hci_cmd_cb->cmd_cmpl_q, p_cmd);
+
+            /* If command was a VSC, then extract command_complete callback */
+            if ((cc_opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC
+#if BLE_INCLUDED == TRUE
+                || (cc_opcode == HCI_BLE_RAND )
+                || (cc_opcode == HCI_BLE_ENCRYPT)
+#endif
+               )
+            {
+                p_cplt_cback = *((void **)(p_cmd + 1));
+            }
+
+            GKI_freebuf (p_cmd);
+
+            break;
+        }
+
+        /* if more commands in queue restart timer */
+        if (BTU_CMD_CMPL_TIMEOUT > 0)
+        {
+            if (!GKI_queue_is_empty (&(p_hci_cmd_cb->cmd_cmpl_q)))
+            {
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+                p_hci_cmd_cb->checked_hcisu = FALSE;
+#endif
+                btu_start_timer (&(p_hci_cmd_cb->cmd_cmpl_timer),
+                                 (UINT16)(BTU_TTYPE_BTU_CMD_CMPL + controller_id),
+                                 BTU_CMD_CMPL_TIMEOUT);
+            }
+            else
+            {
+                btu_stop_timer (&(p_hci_cmd_cb->cmd_cmpl_timer));
+            }
+        }
+    }
+
+    /* handle event */
+    btu_hcif_hdl_command_complete (cc_opcode, p, evt_len, p_cplt_cback, controller_id);
+
+    /* see if we can send more commands */
+    btu_hcif_send_cmd (controller_id, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_hdl_command_status
+**
+** Description      Handle a command status event
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_hdl_command_status (UINT16 opcode, UINT8 status, UINT8 *p_cmd,
+                                         void *p_vsc_status_cback, UINT8 controller_id)
+{
+    BD_ADDR         bd_addr;
+    UINT16          handle;
+#if BTM_SCO_INCLUDED == TRUE
+    tBTM_ESCO_DATA  esco_data;
+#endif
+
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    switch (opcode)
+    {
+        case HCI_EXIT_SNIFF_MODE:
+        case HCI_EXIT_PARK_MODE:
+#if BTM_SCO_WAKE_PARKED_LINK == TRUE
+            if (status != HCI_SUCCESS)
+            {
+                /* Allow SCO initiation to continue if waiting for change mode event */
+                if (p_cmd != NULL)
+                {
+                    p_cmd++;    /* bypass length field */
+                    STREAM_TO_UINT16 (handle, p_cmd);
+                    btm_sco_chk_pend_unpark (status, handle);
+                }
+            }
+#endif
+            /* Case Falls Through */
+
+        case HCI_HOLD_MODE:
+        case HCI_SNIFF_MODE:
+        case HCI_PARK_MODE:
+            btm_pm_proc_cmd_status(status);
+            break;
+
+        default:
+#endif  /* BTM_PWR_MGR_INCLUDED */
+            /* If command failed to start, we may need to tell BTM */
+            if (status != HCI_SUCCESS)
+            {
+                switch (opcode)
+                {
+                    case HCI_INQUIRY:
+                        /* Tell inquiry processing that we are done */
+                        btm_process_inq_complete(status, BTM_BR_INQUIRY_MASK);
+                        break;
+
+                    case HCI_RMT_NAME_REQUEST:
+                        /* Tell inquiry processing that we are done */
+                        btm_process_remote_name (NULL, NULL, 0, status);
+
+                        btm_sec_rmt_name_request_complete (NULL, NULL, status);
+                        break;
+
+                    case HCI_CHANGE_CONN_LINK_KEY:
+                        /* Let host know we're done with error */
+                        /* read handle out of stored command */
+                        if (p_cmd != NULL)
+                        {
+                            p_cmd++;
+                            STREAM_TO_UINT16 (handle, p_cmd);
+
+                            btm_acl_link_key_change (handle, status);
+                        }
+                        break;
+
+                    case HCI_QOS_SETUP_COMP_EVT:
+                        /* Tell qos setup that we are done */
+                        btm_qos_setup_complete(status,0,NULL);
+                        break;
+
+                    case HCI_SWITCH_ROLE:
+                        /* Tell BTM that the command failed */
+                        /* read bd addr out of stored command */
+                        if (p_cmd != NULL)
+                        {
+                            p_cmd++;
+                            STREAM_TO_BDADDR (bd_addr, p_cmd);
+                            btm_acl_role_changed(status, bd_addr, BTM_ROLE_UNDEFINED);
+                        }
+                        else
+                            btm_acl_role_changed(status, NULL, BTM_ROLE_UNDEFINED);
+                        l2c_link_role_changed (NULL, BTM_ROLE_UNDEFINED, HCI_ERR_COMMAND_DISALLOWED);
+                        break;
+
+                    case HCI_CREATE_CONNECTION:
+                        /* read bd addr out of stored command */
+                        if (p_cmd != NULL)
+                        {
+                            p_cmd++;
+                            STREAM_TO_BDADDR (bd_addr, p_cmd);
+                            btm_sec_connected (bd_addr, HCI_INVALID_HANDLE, status, 0);
+                            l2c_link_hci_conn_comp (status, HCI_INVALID_HANDLE, bd_addr);
+                        }
+                        break;
+
+                    case HCI_READ_RMT_EXT_FEATURES_COMP_EVT:
+// btla-specific ++
+		                btu_hcif_read_rmt_ext_features_comp_evt (p_cmd - 3, 0);
+// btla-specific --
+                        break;
+
+                    case HCI_AUTHENTICATION_REQUESTED:
+                        /* Device refused to start authentication.  That should be treated as authentication failure. */
+                        btm_sec_auth_complete (BTM_INVALID_HCI_HANDLE, status);
+                        break;
+
+                    case HCI_SET_CONN_ENCRYPTION:
+                        /* Device refused to start encryption.  That should be treated as encryption failure. */
+                        btm_sec_encrypt_change (BTM_INVALID_HCI_HANDLE, status, FALSE);
+                        break;
+
+#if BTM_SCO_INCLUDED == TRUE
+                    case HCI_SETUP_ESCO_CONNECTION:
+                        /* read handle out of stored command */
+                        if (p_cmd != NULL)
+                        {
+                            p_cmd++;
+                            STREAM_TO_UINT16 (handle, p_cmd);
+
+                            /* Determine if initial connection failed or is a change of setup */
+                            if (btm_is_sco_active(handle))
+                                btm_esco_proc_conn_chg (status, handle, 0, 0, 0, 0);
+                            else
+                                btm_sco_connected (status, NULL, handle, &esco_data);
+                        }
+                        break;
+#endif
+
+/* This is commented out until an upper layer cares about returning event
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+            case HCI_ENHANCED_FLUSH:
+                break;
+#endif
+*/
+                    default:
+                        if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC)
+                            btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback);
+                        break;
+                }
+
+            }
+            else
+            {
+                if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC)
+                    btm_vsc_complete (&status, opcode, 1, (tBTM_CMPL_CB *)p_vsc_status_cback);
+            }
+#if BTM_PWR_MGR_INCLUDED == TRUE
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_command_status_evt
+**
+** Description      Process event HCI_COMMAND_STATUS_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_command_status_evt (UINT8 controller_id, UINT8 *p, UINT16 evt_len)
+{
+    tHCI_CMD_CB * p_hci_cmd_cb = &(btu_cb.hci_cmd_cb[controller_id]);
+    UINT8       status;
+    UINT16      opcode;
+    BT_HDR      *p_cmd = NULL;
+    UINT16      cmd_opcode;
+    UINT8       *p_data = NULL;
+    void        *p_vsc_status_cback = NULL;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT8  (p_hci_cmd_cb->cmd_window, p);
+
+#if (defined(HCI_MAX_SIMUL_CMDS) && (HCI_MAX_SIMUL_CMDS > 0))
+    if (p_hci_cmd_cb->cmd_window > HCI_MAX_SIMUL_CMDS)
+        p_hci_cmd_cb->cmd_window = HCI_MAX_SIMUL_CMDS;
+#endif
+
+    STREAM_TO_UINT16 (opcode, p);
+
+    /* only do this for certain commands */
+    if ((opcode != HCI_RESET) && (opcode != HCI_HOST_NUM_PACKETS_DONE) &&
+        (opcode != HCI_COMMAND_NONE))
+    {
+        /* dequeue stored command */
+        if ((p_cmd = (BT_HDR *) GKI_dequeue (&(p_hci_cmd_cb->cmd_cmpl_q))) != NULL)
+        {
+            /* verify event opcode matches command opcode */
+            p_data = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+            STREAM_TO_UINT16 (cmd_opcode, p_data);
+
+            if (cmd_opcode != opcode)
+            {
+                p_data = NULL;
+                BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING,
+                            "Event mismatch opcode=%X cmd opcode=%X", opcode, cmd_opcode);
+            }
+            /* If command was a VSC, then extract command_status callback */
+            else if ((cmd_opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC)
+            {
+                p_vsc_status_cback = *((void **)(p_cmd + 1));
+            }
+        }
+
+        /* if more commands in queue restart timer */
+        if (BTU_CMD_CMPL_TIMEOUT > 0)
+        {
+            if (!GKI_queue_is_empty (&(p_hci_cmd_cb->cmd_cmpl_q)))
+            {
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+                p_hci_cmd_cb->checked_hcisu = FALSE;
+#endif
+                btu_start_timer (&(p_hci_cmd_cb->cmd_cmpl_timer),
+                                 (UINT16)(BTU_TTYPE_BTU_CMD_CMPL + controller_id),
+                                 BTU_CMD_CMPL_TIMEOUT);
+            }
+            else
+            {
+                btu_stop_timer (&(p_hci_cmd_cb->cmd_cmpl_timer));
+            }
+        }
+    }
+
+    /* handle command */
+    btu_hcif_hdl_command_status (opcode, status, p_data, p_vsc_status_cback, controller_id);
+
+    /* free stored command */
+    if (p_cmd != NULL)
+    {
+        GKI_freebuf (p_cmd);
+    }
+
+    /* See if we can forward any more commands */
+    btu_hcif_send_cmd (controller_id, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_cmd_timeout
+**
+** Description      Handle a command timeout
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_hcif_cmd_timeout (UINT8 controller_id)
+{
+    tHCI_CMD_CB * p_hci_cmd_cb = &(btu_cb.hci_cmd_cb[controller_id]);
+    BT_HDR  *p_cmd;
+    UINT8   *p;
+    void    *p_cplt_cback = NULL;
+    UINT16  opcode;
+// btla-specific ++
+    UINT16  event;
+// btla-specific --
+
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+    if (!(p_hci_cmd_cb->checked_hcisu))
+    {
+        BT_TRACE_1 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING, "BTU HCI(id=%d) command timeout - double check HCISU", controller_id);
+
+        /* trigger HCISU to read any pending data in transport buffer */
+        GKI_send_event(HCISU_TASK, HCISU_EVT_MASK);
+
+        btu_start_timer (&(p_hci_cmd_cb->cmd_cmpl_timer),
+                         (UINT16)(BTU_TTYPE_BTU_CMD_CMPL + controller_id),
+                         2); /* start short timer, if timer is set to 1 then it could expire before HCISU checks. */
+
+        p_hci_cmd_cb->checked_hcisu = TRUE;
+
+        return;
+    }
+#endif
+
+    /* set the controller cmd window to 1, as if we received a response, so
+    ** the flow of commands from the stack doesn't hang */
+    p_hci_cmd_cb->cmd_window = 1;
+
+    /* get queued command */
+    if ((p_cmd = (BT_HDR *) GKI_dequeue (&(p_hci_cmd_cb->cmd_cmpl_q))) == NULL)
+    {
+        BT_TRACE_0 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING, "Cmd timeout; no cmd in queue");
+        return;
+    }
+
+    /* if more commands in queue restart timer */
+    if (BTU_CMD_CMPL_TIMEOUT > 0)
+    {
+        if (!GKI_queue_is_empty (&(p_hci_cmd_cb->cmd_cmpl_q)))
+        {
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+            p_hci_cmd_cb->checked_hcisu = FALSE;
+#endif
+            btu_start_timer (&(p_hci_cmd_cb->cmd_cmpl_timer),
+                             (UINT16)(BTU_TTYPE_BTU_CMD_CMPL + controller_id),
+                             BTU_CMD_CMPL_TIMEOUT);
+        }
+    }
+
+    p = (UINT8 *)(p_cmd + 1) + p_cmd->offset;
+#if (NFC_INCLUDED == TRUE)
+    if (controller_id == NFC_CONTROLLER_ID)
+    {
+        //TODO call nfc_ncif_cmd_timeout
+        BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING, "BTU NCI command timeout - header 0x%02x%02x", p[0], p[1]);
+        return;
+    }
+#endif
+
+    /* get opcode from stored command */
+    STREAM_TO_UINT16 (opcode, p);
+
+// btla-specific ++
+#if (defined(ANDROID_APP_INCLUDED) && (ANDROID_APP_INCLUDED == TRUE))
+    ALOGE("######################################################################");
+    ALOGE("#");
+    ALOGE("# WARNING : BTU HCI(id=%d) command timeout. opcode=0x%x", controller_id, opcode);
+    ALOGE("#");
+    ALOGE("######################################################################");
+#else
+    BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_WARNING, "BTU HCI(id=%d) command timeout. opcode=0x%x", controller_id, opcode);
+#endif
+// btla-specific ++
+
+    /* send stack a fake command complete or command status, but first determine
+    ** which to send
+    */
+    switch (opcode)
+    {
+        case HCI_HOLD_MODE:
+        case HCI_SNIFF_MODE:
+        case HCI_EXIT_SNIFF_MODE:
+        case HCI_PARK_MODE:
+        case HCI_EXIT_PARK_MODE:
+        case HCI_INQUIRY:
+        case HCI_RMT_NAME_REQUEST:
+        case HCI_QOS_SETUP_COMP_EVT:
+        case HCI_CREATE_CONNECTION:
+        case HCI_CHANGE_CONN_LINK_KEY:
+        case HCI_SWITCH_ROLE:
+        case HCI_READ_RMT_EXT_FEATURES_COMP_EVT:
+        case HCI_AUTHENTICATION_REQUESTED:
+        case HCI_SET_CONN_ENCRYPTION:
+#if BTM_SCO_INCLUDED == TRUE
+        case HCI_SETUP_ESCO_CONNECTION:
+#endif
+            /* fake a command status */
+            btu_hcif_hdl_command_status (opcode, HCI_ERR_UNSPECIFIED, p, NULL, controller_id);
+            break;
+
+        default:
+            /* If vendor specific restore the callback function */
+            if ((opcode & HCI_GRP_VENDOR_SPECIFIC) == HCI_GRP_VENDOR_SPECIFIC
+#if BLE_INCLUDED == TRUE
+                || (opcode == HCI_BLE_RAND ) ||
+                (opcode == HCI_BLE_ENCRYPT)
+#endif
+               )
+            {
+                p_cplt_cback = *((void **)(p_cmd + 1));
+#if 0
+                BT_TRACE_2 (TRACE_LAYER_HCI, TRACE_TYPE_DEBUG,
+                            "Restoring VSC callback for opcode=0x%04x, Callback function=0x%07x",
+                            opcode, (UINT32)p_cplt_cback);
+#endif
+            }
+
+            /* fake a command complete; first create a fake event */
+// btla-specific ++
+            event = HCI_ERR_UNSPECIFIED;
+            btu_hcif_hdl_command_complete (opcode, (UINT8 *)&event, 1, p_cplt_cback, controller_id);
+// btla-specific --
+            break;
+    }
+
+    /* free stored command */
+    GKI_freebuf(p_cmd);
+
+    /* If anyone wants device status notifications, give him one */
+    btm_report_device_status (BTM_DEV_STATUS_CMD_TOUT);
+
+    /* See if we can forward any more commands */
+    btu_hcif_send_cmd (controller_id, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_hardware_error_evt
+**
+** Description      Process event HCI_HARDWARE_ERROR_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_hardware_error_evt (UINT8 *p, UINT16 evt_len)
+{
+    BT_TRACE_1 (TRACE_LAYER_HCI, TRACE_TYPE_ERROR, "Ctlr H/w error event - code:0x%x", *p);
+
+    /* If anyone wants device status notifications, give him one. */
+    btm_report_device_status (BTM_DEV_STATUS_DOWN);
+
+    /* Reset the controller */
+    if (BTM_IsDeviceUp())
+        BTM_DeviceReset (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_flush_occured_evt
+**
+** Description      Process event HCI_FLUSH_OCCURED_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_flush_occured_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_role_change_evt
+**
+** Description      Process event HCI_ROLE_CHANGE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_role_change_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    BD_ADDR     bda;
+    UINT8       role;
+
+    STREAM_TO_UINT8 (status, p);
+    STREAM_TO_BDADDR (bda, p);
+    STREAM_TO_UINT8  (role, p);
+
+    l2c_link_role_changed (bda, role, status);
+    btm_acl_role_changed(status, bda, role);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_num_compl_data_pkts_evt
+**
+** Description      Process event HCI_NUM_COMPL_DATA_PKTS_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_num_compl_data_pkts_evt (UINT8 *p, UINT16 evt_len)
+{
+    /* Process for L2CAP and SCO */
+    l2c_link_process_num_completed_pkts (p);
+
+    /* Send on to SCO */
+    /*?? No SCO for now */
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_mode_change_evt
+**
+** Description      Process event HCI_MODE_CHANGE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_mode_change_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT16      handle;
+    UINT8       current_mode;
+    UINT16      interval;
+
+    STREAM_TO_UINT8 (status, p);
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT8 (current_mode, p);
+    STREAM_TO_UINT16 (interval, p);
+#if BTM_PWR_MGR_INCLUDED == TRUE
+#if BTM_SCO_WAKE_PARKED_LINK == TRUE
+    btm_sco_chk_pend_unpark (status, handle);
+#endif
+    btm_pm_proc_mode_change (status, handle, current_mode, interval);
+#else
+    btm_process_mode_change (status, handle, current_mode, interval);
+#endif /* BTM_PWR_MGR_INCLUDED == TRUE */
+
+#if (HID_DEV_INCLUDED == TRUE) && (HID_DEV_PM_INCLUDED == TRUE)
+    hidd_pm_proc_mode_change( status, current_mode, interval ) ;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_ssr_evt
+**
+** Description      Process event HCI_SNIFF_SUB_RATE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+    #if (BTM_SSR_INCLUDED == TRUE)
+static void btu_hcif_ssr_evt (UINT8 *p, UINT16 evt_len)
+{
+#if (BTM_PWR_MGR_INCLUDED == TRUE)
+    btm_pm_proc_ssr_evt(p, evt_len);
+#endif
+}
+    #endif
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_return_link_keys_evt
+**
+** Description      Process event HCI_RETURN_LINK_KEYS_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+
+static void btu_hcif_return_link_keys_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8                       num_keys;
+    tBTM_RETURN_LINK_KEYS_EVT   *result;
+
+    /* get the number of link keys */
+    num_keys = *p;
+
+    /* If there are no link keys don't call the call back */
+    if (!num_keys)
+        return;
+
+    /* Take one extra byte at the beginning to specify event */
+    result = (tBTM_RETURN_LINK_KEYS_EVT *)(--p);
+    result->event = BTM_CB_EVT_RETURN_LINK_KEYS;
+
+    /* Call the BTM function to pass the link keys to application */
+    btm_return_link_keys_evt (result);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_pin_code_request_evt
+**
+** Description      Process event HCI_PIN_CODE_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_pin_code_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    BD_ADDR  bda;
+
+    STREAM_TO_BDADDR (bda, p);
+
+    /* Tell L2CAP that there was a PIN code request,  */
+    /* it may need to stretch timeouts                */
+    l2c_pin_code_request (bda);
+
+    btm_sec_pin_code_request (bda);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_link_key_request_evt
+**
+** Description      Process event HCI_LINK_KEY_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_link_key_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    BD_ADDR  bda;
+
+    STREAM_TO_BDADDR (bda, p);
+    btm_sec_link_key_request (bda);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_link_key_notification_evt
+**
+** Description      Process event HCI_LINK_KEY_NOTIFICATION_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_link_key_notification_evt (UINT8 *p, UINT16 evt_len)
+{
+    BD_ADDR  bda;
+    LINK_KEY key;
+    UINT8    key_type;
+
+    STREAM_TO_BDADDR (bda, p);
+    STREAM_TO_ARRAY16 (key, p);
+    STREAM_TO_UINT8 (key_type, p);
+
+    btm_sec_link_key_notification (bda, key, key_type);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_loopback_command_evt
+**
+** Description      Process event HCI_LOOPBACK_COMMAND_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_loopback_command_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_data_buf_overflow_evt
+**
+** Description      Process event HCI_DATA_BUF_OVERFLOW_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_data_buf_overflow_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_max_slots_changed_evt
+**
+** Description      Process event HCI_MAX_SLOTS_CHANGED_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_max_slots_changed_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_read_clock_off_comp_evt
+**
+** Description      Process event HCI_READ_CLOCK_OFF_COMP_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_read_clock_off_comp_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8       status;
+    UINT16      handle;
+    UINT16      clock_offset;
+
+    STREAM_TO_UINT8  (status, p);
+
+    /* If failed to get clock offset just drop the result */
+    if (status != HCI_SUCCESS)
+        return;
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (clock_offset, p);
+
+    handle = HCID_GET_HANDLE (handle);
+
+    btm_process_clk_off_comp_evt (handle, clock_offset);
+    btm_sec_update_clock_offset (handle, clock_offset);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_conn_pkt_type_change_evt
+**
+** Description      Process event HCI_CONN_PKT_TYPE_CHANGE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_conn_pkt_type_change_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_qos_violation_evt
+**
+** Description      Process event HCI_QOS_VIOLATION_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_qos_violation_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT16   handle;
+
+    STREAM_TO_UINT16 (handle, p);
+
+    handle = HCID_GET_HANDLE (handle);
+
+
+    l2c_link_hci_qos_violation (handle);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_page_scan_mode_change_evt
+**
+** Description      Process event HCI_PAGE_SCAN_MODE_CHANGE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_page_scan_mode_change_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_page_scan_rep_mode_chng_evt
+**
+** Description      Process event HCI_PAGE_SCAN_REP_MODE_CHNG_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_page_scan_rep_mode_chng_evt (UINT8 *p, UINT16 evt_len)
+{
+}
+
+/**********************************************
+** Simple Pairing Events
+***********************************************/
+
+/*******************************************************************************
+**
+** Function         btu_hcif_host_support_evt
+**
+** Description      Process event HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_host_support_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_sec_rmt_host_support_feat_evt(p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_io_cap_request_evt
+**
+** Description      Process event HCI_IO_CAPABILITY_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_io_cap_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_io_capabilities_req(p);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_io_cap_response_evt
+**
+** Description      Process event HCI_IO_CAPABILITY_RESPONSE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_io_cap_response_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_io_capabilities_rsp(p);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_user_conf_request_evt
+**
+** Description      Process event HCI_USER_CONFIRMATION_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_user_conf_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_proc_sp_req_evt(BTM_SP_CFM_REQ_EVT, p);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_hcif_user_passkey_request_evt
+**
+** Description      Process event HCI_USER_PASSKEY_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_user_passkey_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_proc_sp_req_evt(BTM_SP_KEY_REQ_EVT, p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_user_passkey_notif_evt
+**
+** Description      Process event HCI_USER_PASSKEY_NOTIFY_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_user_passkey_notif_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_proc_sp_req_evt(BTM_SP_KEY_NOTIF_EVT, p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_keypress_notif_evt
+**
+** Description      Process event HCI_KEYPRESS_NOTIFY_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_keypress_notif_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_keypress_notif_evt(p);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_link_super_tout_evt
+**
+** Description      Process event HCI_LINK_SUPER_TOUT_CHANGED_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_link_super_tout_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT16 handle, timeout;
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (timeout, p);
+
+    btm_proc_lsto_evt(handle, timeout);
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_rem_oob_request_evt
+**
+** Description      Process event HCI_REMOTE_OOB_DATA_REQUEST_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+    #if BTM_OOB_INCLUDED == TRUE
+static void btu_hcif_rem_oob_request_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_rem_oob_req(p);
+}
+    #endif
+
+/*******************************************************************************
+**
+** Function         btu_hcif_simple_pair_complete_evt
+**
+** Description      Process event HCI_SIMPLE_PAIRING_COMPLETE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+static void btu_hcif_simple_pair_complete_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_simple_pair_complete(p);
+}
+/*******************************************************************************
+**
+** Function         btu_hcif_flush_cmd_queue
+**
+** Description      Flush the HCI command complete queue and transmit queue when
+**                  needed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_hcif_flush_cmd_queue(void)
+{
+    BT_HDR *p_cmd;
+
+    btu_cb.hci_cmd_cb[0].cmd_window = 0;
+    while ((p_cmd = (BT_HDR *) GKI_dequeue (&btu_cb.hci_cmd_cb[0].cmd_cmpl_q)) != NULL)
+    {
+        GKI_freebuf (p_cmd);
+    }
+    while ((p_cmd = (BT_HDR *) GKI_dequeue (&btu_cb.hci_cmd_cb[0].cmd_xmit_q)) != NULL)
+    {
+        GKI_freebuf (p_cmd);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btu_hcif_enhanced_flush_complete_evt
+**
+** Description      Process event HCI_ENHANCED_FLUSH_COMPLETE_EVT
+**
+** Returns          void
+**
+*******************************************************************************/
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+static void btu_hcif_enhanced_flush_complete_evt (UINT8 *p, UINT16 evt_len)
+{
+/* This is empty until an upper layer cares about returning event */
+}
+#endif
+/**********************************************
+** End of Simple Pairing Events
+***********************************************/
+
+
+/**********************************************
+** BLE Events
+***********************************************/
+#if (defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)
+static void btu_hcif_encyption_key_refresh_cmpl_evt (UINT8 *p, UINT16 evt_len)
+{
+    UINT8   status;
+    UINT16  handle;
+
+    STREAM_TO_UINT8  (status, p);
+    STREAM_TO_UINT16 (handle, p);
+
+    btm_sec_encrypt_change (handle, status, 1);
+}
+
+static void btu_ble_process_adv_pkt (UINT8 *p, UINT16 evt_len)
+{
+    BT_TRACE_0 (TRACE_LAYER_HCI, TRACE_TYPE_EVENT, "btu_ble_process_adv_pkt");
+
+    btm_ble_process_adv_pkt(p);
+}
+
+
+static void btu_ble_ll_conn_complete_evt ( UINT8 *p, UINT16 evt_len)
+{
+    UINT8       role, status, bda_type;
+    UINT16      handle;
+    BD_ADDR     bda;
+    UINT16      conn_interval, conn_latency, conn_timeout;
+	UINT16      combined_mode;
+
+    STREAM_TO_UINT8   (status, p);
+    STREAM_TO_UINT16   (handle, p);
+    STREAM_TO_UINT8    (role, p);
+    STREAM_TO_UINT8    (bda_type, p);
+    STREAM_TO_BDADDR   (bda, p);
+    STREAM_TO_UINT16   (conn_interval, p);
+    STREAM_TO_UINT16   (conn_latency, p);
+    STREAM_TO_UINT16   (conn_timeout, p);
+
+    handle = HCID_GET_HANDLE (handle);
+
+    if (status == 0)
+    {
+        btm_ble_connected(bda, handle, HCI_ENCRYPT_MODE_DISABLED, role);
+
+        l2cble_conn_comp (handle, role, bda, bda_type, conn_interval,
+                          conn_latency, conn_timeout);
+    }
+    else
+    {
+        /* If we are LE connectable, check if we need to start advertising again */
+        if (btm_cb.ble_ctr_cb.inq_var.connectable_mode != BTM_BLE_NON_CONNECTABLE)
+        {
+            tACL_CONN   *pa = &btm_cb.acl_db[0];
+            UINT16       xx;
+
+            for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, pa++)
+            {
+                /* If any other LE link is up, we are still not connectable */
+                if (pa->in_use && pa->is_le_link)
+                    return;
+            }
+			combined_mode = (btm_cb.ble_ctr_cb.inq_var.connectable_mode | btm_cb.btm_inq_vars.connectable_mode);
+            btm_ble_set_connectability ( combined_mode );
+        }
+    }
+}
+
+static void btu_ble_ll_conn_param_upd_evt (UINT8 *p, UINT16 evt_len)
+{
+/* This is empty until an upper layer cares about returning event */
+}
+
+static void btu_ble_read_remote_feat_evt (UINT8 *p, UINT16 evt_len)
+{
+    btm_ble_read_remote_features_complete(p);
+}
+
+static void btu_ble_proc_ltk_req (UINT8 *p, UINT16 evt_len)
+{
+    UINT16 ediv, handle;
+    UINT8   *pp;
+
+    STREAM_TO_UINT16(handle, p);
+    pp = p + 8;
+    STREAM_TO_UINT16(ediv, pp);
+#if SMP_INCLUDED == TRUE
+    btm_ble_ltk_request(handle, p, ediv);
+#endif
+    /* This is empty until an upper layer cares about returning event */
+}
+/**********************************************
+** End of BLE Events Handler
+***********************************************/
+#endif /* BLE_INCLUDED */
+
diff --git a/stack/btu/btu_init.c b/stack/btu/btu_init.c
new file mode 100644
index 0000000..fe52361
--- /dev/null
+++ b/stack/btu/btu_init.c
@@ -0,0 +1,157 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains the routines that load and shutdown the core stack
+ *  components.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include <string.h>
+#include "dyn_mem.h"
+
+#include "btu.h"
+#include "btm_int.h"
+#include "sdpint.h"
+#include "l2c_int.h"
+
+#if (BLE_INCLUDED == TRUE)
+#include "gatt_api.h"
+#include "gatt_int.h"
+#if SMP_INCLUDED == TRUE
+#include "smp_int.h"
+#endif
+#endif
+
+extern void PLATFORM_DisableHciTransport(UINT8 bDisable);
+/*****************************************************************************
+**                          V A R I A B L E S                                *
+******************************************************************************/
+const BD_ADDR   BT_BD_ANY = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+/*****************************************************************************
+**                          F U N C T I O N S                                *
+******************************************************************************/
+/*****************************************************************************
+**
+** Function         btu_init_core
+**
+** Description      Initialize control block memory for each core component.
+**
+**
+** Returns          void
+**
+******************************************************************************/
+void btu_init_core(void)
+{
+    /* Initialize the mandatory core stack components */
+    btm_init();
+
+    l2c_init();
+
+    sdp_init();
+
+#if BLE_INCLUDED == TRUE
+    gatt_init();
+#if (defined(SMP_INCLUDED) && SMP_INCLUDED == TRUE)
+    SMP_Init();
+#endif
+    btm_ble_init();
+#endif
+}
+
+
+/*****************************************************************************
+**
+** Function         BTE_Init
+**
+** Description      Initializes the BTU control block.
+**
+**                  NOTE: Must be called before creating any tasks
+**                      (RPC, BTU, HCIT, APPL, etc.)
+**
+** Returns          void
+**
+******************************************************************************/
+void BTE_Init(void)
+{
+    int i = 0;
+
+    memset (&btu_cb, 0, sizeof (tBTU_CB));
+    btu_cb.hcit_acl_pkt_size = BTU_DEFAULT_DATA_SIZE + HCI_DATA_PREAMBLE_SIZE;
+#if (BLE_INCLUDED == TRUE)
+    btu_cb.hcit_ble_acl_pkt_size = BTU_DEFAULT_BLE_DATA_SIZE + HCI_DATA_PREAMBLE_SIZE;
+#endif
+    btu_cb.trace_level = HCI_INITIAL_TRACE_LEVEL;
+
+    for ( i = 0; i < BTU_MAX_LOCAL_CTRLS; i++ ) /* include BR/EDR */
+        btu_cb.hci_cmd_cb[i].cmd_window = 1;
+}
+
+
+/*****************************************************************************
+**
+** Function         BTU_AclPktSize
+**
+** Description      export the ACL packet size.
+**
+** Returns          UINT16
+**
+******************************************************************************/
+UINT16 BTU_AclPktSize(void)
+{
+    return btu_cb.hcit_acl_pkt_size;
+}
+/*****************************************************************************
+**
+** Function         BTU_BleAclPktSize
+**
+** Description      export the BLE ACL packet size.
+**
+** Returns          UINT16
+**
+******************************************************************************/
+UINT16 BTU_BleAclPktSize(void)
+{
+#if BLE_INCLUDED == TRUE
+    return btu_cb.hcit_ble_acl_pkt_size;
+#else
+    return 0;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         btu_uipc_rx_cback
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_uipc_rx_cback(BT_HDR *p_msg)
+{
+    BT_TRACE_3 (TRACE_LAYER_BTM, TRACE_TYPE_DEBUG, "btu_uipc_rx_cback event 0x%x, len %d, offset %d",
+		p_msg->event, p_msg->len, p_msg->offset);
+    GKI_send_msg(BTU_TASK, BTU_HCI_RCV_MBOX, p_msg);
+
+}
+
diff --git a/stack/btu/btu_task.c b/stack/btu/btu_task.c
new file mode 100644
index 0000000..48ce489
--- /dev/null
+++ b/stack/btu/btu_task.c
@@ -0,0 +1,835 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the main Bluetooth Upper Layer processing loop.
+ *  The Broadcom implementations of L2CAP RFCOMM, SDP and the BTIf run as one
+ *  GKI task. This btu_task switches between them.
+ *
+ *  Note that there will always be an L2CAP, but there may or may not be an
+ *  RFCOMM or SDP. Whether these layers are present or not is determined by
+ *  compile switches.
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "l2c_int.h"
+#include "btu.h"
+#include "bt_utils.h"
+
+#include "sdpint.h"
+
+#if ( defined(RFCOMM_INCLUDED) && RFCOMM_INCLUDED == TRUE )
+#include "port_api.h"
+#include "port_ext.h"
+#endif
+
+#include "btm_api.h"
+#include "btm_int.h"
+
+#if (defined(EVAL) && EVAL == TRUE)
+#include "btu_eval.h"
+#endif
+
+#if GAP_INCLUDED == TRUE
+#include "gap_int.h"
+#endif
+
+#if (defined(OBX_INCLUDED) && OBX_INCLUDED == TRUE)
+#include "obx_int.h"
+
+#if (defined(BIP_INCLUDED) && BIP_INCLUDED == TRUE)
+#include "bip_int.h"
+#endif /* BIP */
+
+#if (BPP_SND_INCLUDED == TRUE ||  BPP_INCLUDED == TRUE)
+#include "bpp_int.h"
+#endif /* BPP */
+
+#endif /* OBX */
+
+#include "bt_trace.h"
+
+/* BTE application task */
+#if APPL_INCLUDED == TRUE
+#include "bte_appl.h"
+#endif
+
+#if (defined(RPC_INCLUDED) && RPC_INCLUDED == TRUE)
+#include "rpct_main.h"
+#endif
+
+#if (defined(BNEP_INCLUDED) && BNEP_INCLUDED == TRUE)
+#include "bnep_int.h"
+#endif
+
+#if (defined(PAN_INCLUDED) && PAN_INCLUDED == TRUE)
+#include "pan_int.h"
+#endif
+
+#if (defined(SAP_SERVER_INCLUDED) && SAP_SERVER_INCLUDED == TRUE)
+#include "sap_int.h"
+#endif
+
+#if (defined(HID_DEV_INCLUDED) && HID_DEV_INCLUDED == TRUE )
+#include "hidd_int.h"
+#endif
+
+#if (defined(HID_HOST_INCLUDED) && HID_HOST_INCLUDED == TRUE )
+#include "hidh_int.h"
+#endif
+
+#if (defined(AVDT_INCLUDED) && AVDT_INCLUDED == TRUE)
+#include "avdt_int.h"
+#else
+extern void avdt_rcv_sync_info (BT_HDR *p_buf); /* this is for hci_test */
+#endif
+
+#if (defined(MCA_INCLUDED) && MCA_INCLUDED == TRUE)
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+#endif
+
+
+#if (defined(BTU_BTA_INCLUDED) && BTU_BTA_INCLUDED == TRUE)
+#include "bta_sys.h"
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+#include "gatt_int.h"
+#if (SMP_INCLUDED == TRUE)
+#include "smp_int.h"
+#endif
+#include "btm_ble_int.h"
+#endif
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+BT_API extern void BTE_InitStack(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Define BTU storage area
+*/
+#if BTU_DYNAMIC_MEMORY == FALSE
+tBTU_CB  btu_cb;
+#endif
+
+
+/* Define a function prototype to allow a generic timeout handler */
+typedef void (tUSER_TIMEOUT_FUNC) (TIMER_LIST_ENT *p_tle);
+
+/*******************************************************************************
+**
+** Function         btu_task
+**
+** Description      This is the main task of the Bluetooth Upper Layers unit.
+**                  It sits in a loop waiting for messages, and dispatches them
+**                  to the appropiate handlers.
+**
+** Returns          should never return
+**
+*******************************************************************************/
+BTU_API UINT32 btu_task (UINT32 param)
+{
+    UINT16           event;
+    BT_HDR          *p_msg;
+    UINT8            i;
+    UINT16           mask;
+    BOOLEAN          handled;
+
+#if (defined(HCISU_H4_INCLUDED) && HCISU_H4_INCLUDED == TRUE)
+    /* wait an event that HCISU is ready */
+    GKI_wait(0xFFFF, 0);
+#endif
+    /* Initialize the mandatory core stack control blocks
+       (BTU, BTM, L2CAP, and SDP)
+     */
+    btu_init_core();
+
+    /* Initialize any optional stack components */
+    BTE_InitStack();
+
+#if (defined(BTU_BTA_INCLUDED) && BTU_BTA_INCLUDED == TRUE)
+    bta_sys_init();
+#endif
+
+    /* Initialise platform trace levels at this point as BTE_InitStack() and bta_sys_init()
+     * reset the control blocks and preset the trace level with XXX_INITIAL_TRACE_LEVEL
+     */
+#if ( BT_USE_TRACES==TRUE )
+    BTE_InitTraceLevels();
+#endif
+
+    /* Send a startup evt message to BTIF_TASK to kickstart the init procedure */
+    GKI_send_event(BTIF_TASK, BT_EVT_TRIGGER_STACK_INIT);
+
+    raise_priority_a2dp(TASK_HIGH_BTU);
+
+    /* Wait for, and process, events */
+    for (;;)
+    {
+        event = GKI_wait (0xFFFF, 0);
+
+        if (event & TASK_MBOX_0_EVT_MASK)
+        {
+            /* Process all messages in the queue */
+            while ((p_msg = (BT_HDR *) GKI_read_mbox (BTU_HCI_RCV_MBOX)) != NULL)
+            {
+                /* Determine the input message type. */
+                switch (p_msg->event & BT_EVT_MASK)
+                {
+                    case BT_EVT_TO_BTU_HCI_ACL:
+                        /* All Acl Data goes to L2CAP */
+                        l2c_rcv_acl_data (p_msg);
+                        break;
+
+                    case BT_EVT_TO_BTU_L2C_SEG_XMIT:
+                        /* L2CAP segment transmit complete */
+                        l2c_link_segments_xmitted (p_msg);
+                        break;
+
+                    case BT_EVT_TO_BTU_HCI_SCO:
+#if BTM_SCO_INCLUDED == TRUE
+                        btm_route_sco_data (p_msg);
+                        break;
+#endif
+
+                    case BT_EVT_TO_BTU_HCI_EVT:
+                        btu_hcif_process_event ((UINT8)(p_msg->event & BT_SUB_EVT_MASK), p_msg);
+                        GKI_freebuf(p_msg);
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+                        /* If host receives events which it doesn't response to, */
+                        /* host should start idle timer to enter sleep mode.     */
+                        btu_check_bt_sleep ();
+#endif
+                        break;
+
+                    case BT_EVT_TO_BTU_HCI_CMD:
+                        btu_hcif_send_cmd ((UINT8)(p_msg->event & BT_SUB_EVT_MASK), p_msg);
+                        break;
+
+#if (defined(OBX_INCLUDED) && OBX_INCLUDED == TRUE)
+#if (defined(OBX_SERVER_INCLUDED) && OBX_SERVER_INCLUDED == TRUE)
+                    case BT_EVT_TO_OBX_SR_MSG:
+                        obx_sr_proc_evt((tOBX_PORT_EVT *)(p_msg + 1));
+                        GKI_freebuf (p_msg);
+                        break;
+
+                    case BT_EVT_TO_OBX_SR_L2C_MSG:
+                        obx_sr_proc_l2c_evt((tOBX_L2C_EVT_MSG *)(p_msg + 1));
+                        GKI_freebuf (p_msg);
+                        break;
+#endif
+
+#if (defined(OBX_CLIENT_INCLUDED) && OBX_CLIENT_INCLUDED == TRUE)
+                    case BT_EVT_TO_OBX_CL_MSG:
+                        obx_cl_proc_evt((tOBX_PORT_EVT *)(p_msg + 1));
+                        GKI_freebuf (p_msg);
+                        break;
+
+                    case BT_EVT_TO_OBX_CL_L2C_MSG:
+                        obx_cl_proc_l2c_evt((tOBX_L2C_EVT_MSG *)(p_msg + 1));
+                        GKI_freebuf (p_msg);
+                        break;
+#endif
+
+#if (defined(BIP_INCLUDED) && BIP_INCLUDED == TRUE)
+                    case BT_EVT_TO_BIP_CMDS :
+                        bip_proc_btu_event(p_msg);
+                        GKI_freebuf (p_msg);
+                        break;
+#endif /* BIP */
+#if (BPP_SND_INCLUDED == TRUE || BPP_INCLUDED == TRUE)
+                    case BT_EVT_TO_BPP_PR_CMDS:
+                        bpp_pr_proc_event(p_msg);
+                        GKI_freebuf (p_msg);
+                        break;
+                    case BT_EVT_TO_BPP_SND_CMDS:
+                        bpp_snd_proc_event(p_msg);
+                        GKI_freebuf (p_msg);
+                        break;
+
+#endif /* BPP */
+
+#endif /* OBX */
+
+#if (defined(SAP_SERVER_INCLUDED) && SAP_SERVER_INCLUDED == TRUE)
+                    case BT_EVT_TO_BTU_SAP :
+                        sap_proc_btu_event(p_msg);
+                        GKI_freebuf (p_msg);
+                        break;
+#endif /* SAP */
+#if (defined(GAP_CONN_INCLUDED) && GAP_CONN_INCLUDED == TRUE && GAP_CONN_POST_EVT_INCLUDED == TRUE)
+                    case BT_EVT_TO_GAP_MSG :
+                        gap_proc_btu_event(p_msg);
+                        GKI_freebuf (p_msg);
+                        break;
+#endif
+                    case BT_EVT_TO_START_TIMER :
+                        /* Start free running 1 second timer for list management */
+                        GKI_start_timer (TIMER_0, GKI_SECS_TO_TICKS (1), TRUE);
+                        GKI_freebuf (p_msg);
+                        break;
+
+#if defined(QUICK_TIMER_TICKS_PER_SEC) && (QUICK_TIMER_TICKS_PER_SEC > 0)
+                    case BT_EVT_TO_START_QUICK_TIMER :
+                        GKI_start_timer (TIMER_2, QUICK_TIMER_TICKS, TRUE);
+                        GKI_freebuf (p_msg);
+                        break;
+#endif
+
+                    default:
+                        i = 0;
+                        mask = (UINT16) (p_msg->event & BT_EVT_MASK);
+                        handled = FALSE;
+
+                        for (; !handled && i < BTU_MAX_REG_EVENT; i++)
+                        {
+                            if (btu_cb.event_reg[i].event_cb == NULL)
+                                continue;
+
+                            if (mask == btu_cb.event_reg[i].event_range)
+                            {
+                                if (btu_cb.event_reg[i].event_cb)
+                                {
+                                    btu_cb.event_reg[i].event_cb(p_msg);
+                                    handled = TRUE;
+                                }
+                            }
+                        }
+
+                        if (handled == FALSE)
+                            GKI_freebuf (p_msg);
+
+                        break;
+                }
+            }
+        }
+
+
+        if (event & TIMER_0_EVT_MASK)
+        {
+            TIMER_LIST_ENT  *p_tle;
+
+            GKI_update_timer_list (&btu_cb.timer_queue, 1);
+
+            while ((btu_cb.timer_queue.p_first) && (!btu_cb.timer_queue.p_first->ticks))
+            {
+                p_tle = btu_cb.timer_queue.p_first;
+                GKI_remove_from_timer_list (&btu_cb.timer_queue, p_tle);
+
+                switch (p_tle->event)
+                {
+                    case BTU_TTYPE_BTM_DEV_CTL:
+                        btm_dev_timeout(p_tle);
+                        break;
+
+                    case BTU_TTYPE_BTM_ACL:
+                        btm_acl_timeout(p_tle);
+                        break;
+
+                    case BTU_TTYPE_L2CAP_LINK:
+                    case BTU_TTYPE_L2CAP_CHNL:
+                    case BTU_TTYPE_L2CAP_HOLD:
+                    case BTU_TTYPE_L2CAP_INFO:
+                    case BTU_TTYPE_L2CAP_FCR_ACK:
+
+                        l2c_process_timeout (p_tle);
+                        break;
+
+                    case BTU_TTYPE_SDP:
+                        sdp_conn_timeout ((tCONN_CB *)p_tle->param);
+                        break;
+
+                    case BTU_TTYPE_BTM_RMT_NAME:
+                        btm_inq_rmt_name_failed();
+                        break;
+
+#if (defined(RFCOMM_INCLUDED) && RFCOMM_INCLUDED == TRUE)
+                    case BTU_TTYPE_RFCOMM_MFC:
+                    case BTU_TTYPE_RFCOMM_PORT:
+                        rfcomm_process_timeout (p_tle);
+                        break;
+
+#endif /* If defined(RFCOMM_INCLUDED) && RFCOMM_INCLUDED == TRUE */
+
+#if ((defined(BNEP_INCLUDED) && BNEP_INCLUDED == TRUE))
+                    case BTU_TTYPE_BNEP:
+                        bnep_process_timeout(p_tle);
+                        break;
+#endif
+
+
+#if (defined(AVDT_INCLUDED) && AVDT_INCLUDED == TRUE)
+                    case BTU_TTYPE_AVDT_CCB_RET:
+                    case BTU_TTYPE_AVDT_CCB_RSP:
+                    case BTU_TTYPE_AVDT_CCB_IDLE:
+                    case BTU_TTYPE_AVDT_SCB_TC:
+                        avdt_process_timeout(p_tle);
+                        break;
+#endif
+
+#if (defined(OBX_INCLUDED) && OBX_INCLUDED == TRUE)
+#if (defined(OBX_CLIENT_INCLUDED) && OBX_CLIENT_INCLUDED == TRUE)
+                    case BTU_TTYPE_OBX_CLIENT_TO:
+                        obx_cl_timeout(p_tle);
+                        break;
+#endif
+#if (defined(OBX_SERVER_INCLUDED) && OBX_SERVER_INCLUDED == TRUE)
+                    case BTU_TTYPE_OBX_SERVER_TO:
+                        obx_sr_timeout(p_tle);
+                        break;
+
+                    case BTU_TTYPE_OBX_SVR_SESS_TO:
+                        obx_sr_sess_timeout(p_tle);
+                        break;
+#endif
+#endif
+
+#if (defined(SAP_SERVER_INCLUDED) && SAP_SERVER_INCLUDED == TRUE)
+                    case BTU_TTYPE_SAP_TO:
+                        sap_process_timeout(p_tle);
+                        break;
+#endif
+
+                    case BTU_TTYPE_BTU_CMD_CMPL:
+                        btu_hcif_cmd_timeout((UINT8)(p_tle->event - BTU_TTYPE_BTU_CMD_CMPL));
+                        break;
+
+#if (defined(HID_HOST_INCLUDED) && HID_HOST_INCLUDED == TRUE)
+                    case BTU_TTYPE_HID_HOST_REPAGE_TO :
+                        hidh_proc_repage_timeout(p_tle);
+                        break;
+#endif
+
+#if (defined(BLE_INCLUDED) && BLE_INCLUDED == TRUE)
+                    case BTU_TTYPE_BLE_INQUIRY:
+                    case BTU_TTYPE_BLE_GAP_LIM_DISC:
+                    case BTU_TTYPE_BLE_RANDOM_ADDR:
+                        btm_ble_timeout(p_tle);
+                        break;
+
+                    case BTU_TTYPE_BLE_SCAN_PARAM_IDLE:
+                        btm_ble_scan_param_idle();
+                        break;
+
+                    case BTU_TTYPE_ATT_WAIT_FOR_RSP:
+                        gatt_rsp_timeout(p_tle);
+                        break;
+
+                    case BTU_TTYPE_ATT_WAIT_FOR_IND_ACK:
+                        gatt_ind_ack_timeout(p_tle);
+                        break;
+#if (defined(SMP_INCLUDED) && SMP_INCLUDED == TRUE)
+                    case BTU_TTYPE_SMP_PAIRING_CMD:
+                        smp_rsp_timeout(p_tle);
+                        break;
+#endif
+
+#endif
+
+#if (MCA_INCLUDED == TRUE)
+                    case BTU_TTYPE_MCA_CCB_RSP:
+                        mca_process_timeout(p_tle);
+                        break;
+#endif
+                    case BTU_TTYPE_USER_FUNC:
+                        {
+                            tUSER_TIMEOUT_FUNC  *p_uf = (tUSER_TIMEOUT_FUNC *)p_tle->param;
+                            (*p_uf)(p_tle);
+                        }
+                        break;
+
+                    default:
+                        i = 0;
+                        handled = FALSE;
+
+                        for (; !handled && i < BTU_MAX_REG_TIMER; i++)
+                        {
+                            if (btu_cb.timer_reg[i].timer_cb == NULL)
+                                continue;
+                            if (btu_cb.timer_reg[i].p_tle == p_tle)
+                            {
+                                btu_cb.timer_reg[i].timer_cb(p_tle);
+                                handled = TRUE;
+                            }
+                        }
+                        break;
+                }
+            }
+
+            /* if timer list is empty stop periodic GKI timer */
+            if (btu_cb.timer_queue.p_first == NULL)
+            {
+                GKI_stop_timer(TIMER_0);
+            }
+        }
+
+#if defined(QUICK_TIMER_TICKS_PER_SEC) && (QUICK_TIMER_TICKS_PER_SEC > 0)
+        if (event & TIMER_2_EVT_MASK)
+        {
+            btu_process_quick_timer_evt();
+        }
+#endif
+
+
+#if (RPC_INCLUDED == TRUE)
+        /* if RPC message queue event */
+        if (event & RPCGEN_MSG_EVT)
+        {
+            if ((p_msg = (BT_HDR *) GKI_read_mbox(RPCGEN_MSG_MBOX)) != NULL)
+                RPCT_RpcgenMsg(p_msg);  /* handle RPC message queue */
+        }
+#endif
+
+#if (defined(BTU_BTA_INCLUDED) && BTU_BTA_INCLUDED == TRUE)
+        if (event & TASK_MBOX_2_EVT_MASK)
+        {
+            while ((p_msg = (BT_HDR *) GKI_read_mbox(TASK_MBOX_2)) != NULL)
+            {
+                bta_sys_event(p_msg);
+            }
+        }
+
+        if (event & TIMER_1_EVT_MASK)
+        {
+            bta_sys_timer_update();
+        }
+#endif
+
+        if (event & EVENT_MASK(APPL_EVT_7))
+            break;
+    }
+
+    return(0);
+}
+
+/*******************************************************************************
+**
+** Function         btu_start_timer
+**
+** Description      Start a timer for the specified amount of time.
+**                  NOTE: The timeout resolution is in SECONDS! (Even
+**                          though the timer structure field is ticks)
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_start_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout)
+{
+    BT_HDR *p_msg;
+    /* if timer list is currently empty, start periodic GKI timer */
+    if (btu_cb.timer_queue.p_first == NULL)
+    {
+        /* if timer starts on other than BTU task */
+        if (GKI_get_taskid() != BTU_TASK)
+        {
+            /* post event to start timer in BTU task */
+            if ((p_msg = (BT_HDR *)GKI_getbuf(BT_HDR_SIZE)) != NULL)
+            {
+                p_msg->event = BT_EVT_TO_START_TIMER;
+                GKI_send_msg (BTU_TASK, TASK_MBOX_0, p_msg);
+            }
+        }
+        else
+        {
+            /* Start free running 1 second timer for list management */
+            GKI_start_timer (TIMER_0, GKI_SECS_TO_TICKS (1), TRUE);
+        }
+    }
+
+    GKI_remove_from_timer_list (&btu_cb.timer_queue, p_tle);
+
+    p_tle->event = type;
+    p_tle->ticks = timeout;         /* Save the number of seconds for the timer */
+
+    GKI_add_to_timer_list (&btu_cb.timer_queue, p_tle);
+}
+
+/*******************************************************************************
+**
+** Function         btu_remaining_time
+**
+** Description      Return amount of time to expire
+**
+** Returns          time in second
+**
+*******************************************************************************/
+UINT32 btu_remaining_time (TIMER_LIST_ENT *p_tle)
+{
+    return(GKI_get_remaining_ticks (&btu_cb.timer_queue, p_tle));
+}
+
+/*******************************************************************************
+**
+** Function         btu_stop_timer
+**
+** Description      Stop a timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_stop_timer (TIMER_LIST_ENT *p_tle)
+{
+    GKI_remove_from_timer_list (&btu_cb.timer_queue, p_tle);
+
+    /* if timer list is empty stop periodic GKI timer */
+    if (btu_cb.timer_queue.p_first == NULL)
+    {
+        GKI_stop_timer(TIMER_0);
+    }
+
+}
+
+#if defined(QUICK_TIMER_TICKS_PER_SEC) && (QUICK_TIMER_TICKS_PER_SEC > 0)
+/*******************************************************************************
+**
+** Function         btu_start_quick_timer
+**
+** Description      Start a timer for the specified amount of time.
+**                  NOTE: The timeout resolution depends on including modules.
+**                  QUICK_TIMER_TICKS_PER_SEC should be used to convert from
+**                  time to ticks.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_start_quick_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout)
+{
+    BT_HDR *p_msg;
+
+    /* if timer list is currently empty, start periodic GKI timer */
+    if (btu_cb.quick_timer_queue.p_first == NULL)
+    {
+        /* script test calls stack API without posting event */
+        if (GKI_get_taskid() != BTU_TASK)
+        {
+            /* post event to start timer in BTU task */
+            if ((p_msg = (BT_HDR *)GKI_getbuf(BT_HDR_SIZE)) != NULL)
+            {
+                p_msg->event = BT_EVT_TO_START_QUICK_TIMER;
+                GKI_send_msg (BTU_TASK, TASK_MBOX_0, p_msg);
+            }
+        }
+        else
+            GKI_start_timer(TIMER_2, QUICK_TIMER_TICKS, TRUE);
+    }
+
+    GKI_remove_from_timer_list (&btu_cb.quick_timer_queue, p_tle);
+
+    p_tle->event = type;
+    p_tle->ticks = timeout; /* Save the number of ticks for the timer */
+
+    GKI_add_to_timer_list (&btu_cb.quick_timer_queue, p_tle);
+}
+
+
+/*******************************************************************************
+**
+** Function         btu_stop_quick_timer
+**
+** Description      Stop a timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_stop_quick_timer (TIMER_LIST_ENT *p_tle)
+{
+    GKI_remove_from_timer_list (&btu_cb.quick_timer_queue, p_tle);
+
+    /* if timer list is empty stop periodic GKI timer */
+    if (btu_cb.quick_timer_queue.p_first == NULL)
+    {
+        GKI_stop_timer(TIMER_2);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         btu_process_quick_timer_evt
+**
+** Description      Process quick timer event
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_process_quick_timer_evt(void)
+{
+    process_quick_timer_evt(&btu_cb.quick_timer_queue);
+
+    /* if timer list is empty stop periodic GKI timer */
+    if (btu_cb.quick_timer_queue.p_first == NULL)
+    {
+        GKI_stop_timer(TIMER_2);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         process_quick_timer_evt
+**
+** Description      Process quick timer event
+**
+** Returns          void
+**
+*******************************************************************************/
+void process_quick_timer_evt(TIMER_LIST_Q *p_tlq)
+{
+    TIMER_LIST_ENT  *p_tle;
+
+    GKI_update_timer_list (p_tlq, 1);
+
+    while ((p_tlq->p_first) && (!p_tlq->p_first->ticks))
+    {
+        p_tle = p_tlq->p_first;
+        GKI_remove_from_timer_list (p_tlq, p_tle);
+
+        switch (p_tle->event)
+        {
+            case BTU_TTYPE_L2CAP_CHNL:      /* monitor or retransmission timer */
+            case BTU_TTYPE_L2CAP_FCR_ACK:   /* ack timer */
+                l2c_process_timeout (p_tle);
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+#endif /* defined(QUICK_TIMER_TICKS_PER_SEC) && (QUICK_TIMER_TICKS_PER_SEC > 0) */
+
+
+
+void btu_register_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout, tBTU_TIMER_CALLBACK timer_cb)
+{
+    UINT8 i = 0;
+    INT8  first = -1;
+    for (; i < BTU_MAX_REG_TIMER; i++)
+    {
+        if (btu_cb.timer_reg[i].p_tle == NULL && first < 0)
+            first = i;
+        if (btu_cb.timer_reg[i].p_tle == p_tle)
+        {
+            btu_cb.timer_reg[i].timer_cb = timer_cb;
+            btu_start_timer(p_tle, type, timeout);
+            first = -1;
+            break;
+        }
+    }
+
+    if (first >= 0 && first < BTU_MAX_REG_TIMER)
+    {
+        btu_cb.timer_reg[first].timer_cb = timer_cb;
+        btu_cb.timer_reg[first].p_tle = p_tle;
+        btu_start_timer(p_tle, type, timeout);
+    }
+
+}
+
+
+void btu_deregister_timer(TIMER_LIST_ENT *p_tle)
+{
+    UINT8 i = 0;
+
+    for (; i < BTU_MAX_REG_TIMER; i++)
+    {
+        if (btu_cb.timer_reg[i].p_tle == p_tle)
+        {
+            btu_stop_timer(p_tle);
+            btu_cb.timer_reg[i].timer_cb = NULL;
+            btu_cb.timer_reg[i].p_tle = NULL;
+            break;
+        }
+    }
+}
+
+void btu_register_event_range (UINT16 start, tBTU_EVENT_CALLBACK event_cb)
+{
+    UINT8 i = 0;
+    INT8  first = -1;
+
+    for (; i < BTU_MAX_REG_EVENT; i++)
+    {
+        if (btu_cb.event_reg[i].event_cb == NULL && first < 0)
+            first = i;
+
+        if (btu_cb.event_reg[i].event_range == start)
+        {
+            btu_cb.event_reg[i].event_cb = event_cb;
+
+            if (!event_cb)
+                btu_cb.event_reg[i].event_range = 0;
+
+            first = -1;
+        }
+    }
+
+    /* if not deregistering && an empty index was found in range, register */
+    if (event_cb && first >= 0 && first < BTU_MAX_REG_EVENT)
+    {
+        btu_cb.event_reg[first].event_range = start;
+        btu_cb.event_reg[first].event_cb = event_cb;
+    }
+}
+
+
+void btu_deregister_event_range (UINT16 range)
+{
+    btu_register_event_range(range, NULL);
+}
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         btu_check_bt_sleep
+**
+** Description      This function is called to check if controller can go to sleep.
+**
+** Returns          void
+**
+*******************************************************************************/
+void btu_check_bt_sleep (void)
+{
+    if ((btu_cb.hci_cmd_cb[LOCAL_BR_EDR_CONTROLLER_ID].cmd_cmpl_q.count == 0)
+        &&(btu_cb.hci_cmd_cb[LOCAL_BR_EDR_CONTROLLER_ID].cmd_xmit_q.count == 0))
+    {
+        if (l2cb.controller_xmit_window == l2cb.num_lm_acl_bufs)
+        {
+            /* enable dev to sleep  in the cmd cplt and cmd status only and num cplt packet */
+            HCI_LP_ALLOW_BT_DEVICE_SLEEP();
+        }
+    }
+}
+#endif
diff --git a/stack/gatt/att_protocol.c b/stack/gatt/att_protocol.c
new file mode 100644
index 0000000..a114a33
--- /dev/null
+++ b/stack/gatt/att_protocol.c
@@ -0,0 +1,630 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains ATT protocol functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+
+#include "gatt_int.h"
+#include "l2c_api.h"
+
+#define GATT_HDR_FIND_TYPE_VALUE_LEN    21
+#define GATT_OP_CODE_SIZE   1
+/**********************************************************************
+**   ATT protocl message building utility                              *
+***********************************************************************/
+/*******************************************************************************
+**
+** Function         attp_build_mtu_exec_cmd
+**
+** Description      Build a exchange MTU request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_mtu_cmd(UINT8 op_code, UINT16 rx_mtu)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + GATT_HDR_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, op_code);
+        UINT16_TO_STREAM (p, rx_mtu);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = GATT_HDR_SIZE; /* opcode + 2 bytes mtu */
+    }
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_exec_write_cmd
+**
+** Description      Build a execute write request or response.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_exec_write_cmd (UINT8 op_code, UINT8 flag)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)(sizeof(BT_HDR) + 10 + L2CAP_MIN_OFFSET))) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = GATT_OP_CODE_SIZE;
+
+        UINT8_TO_STREAM (p, op_code);
+
+        if (op_code == GATT_REQ_EXEC_WRITE)
+        {
+            flag &= GATT_PREP_WRITE_EXEC;
+            UINT8_TO_STREAM (p, flag);
+            p_buf->len += 1;
+        }
+
+    }
+
+    return p_buf;
+}
+
+/*******************************************************************************
+**
+** Function         attp_build_err_cmd
+**
+** Description      Build a exchange MTU request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_err_cmd(UINT8 cmd_code, UINT16 err_handle, UINT8 reason)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + L2CAP_MIN_OFFSET + 5)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, GATT_RSP_ERROR);
+        UINT8_TO_STREAM (p, cmd_code);
+        UINT16_TO_STREAM(p, err_handle);
+        UINT8_TO_STREAM (p, reason);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        /* GATT_HDR_SIZE (1B ERR_RSP op code+ 2B handle) + 1B cmd_op_code  + 1B status */
+        p_buf->len = GATT_HDR_SIZE + 1 + 1;
+    }
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_browse_cmd
+**
+** Description      Build a read information request or read by type request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_browse_cmd(UINT8 op_code, UINT16 s_hdl, UINT16 e_hdl, tBT_UUID uuid)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + 8 + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+        /* Describe the built message location and size */
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = GATT_OP_CODE_SIZE + 4;
+
+        UINT8_TO_STREAM (p, op_code);
+        UINT16_TO_STREAM (p, s_hdl);
+        UINT16_TO_STREAM (p, e_hdl);
+        p_buf->len += gatt_build_uuid_to_stream(&p, uuid);
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_read_handles_cmd
+**
+** Description      Build a read by type and value request.
+**
+** Returns          pointer to the command buffer.
+**
+*******************************************************************************/
+BT_HDR *attp_build_read_handles_cmd (UINT16 payload_size, tGATT_FIND_TYPE_VALUE *p_value_type)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+    UINT16      len = p_value_type->value_len;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)(sizeof(BT_HDR) + payload_size + L2CAP_MIN_OFFSET))) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = 5; /* opcode + s_handle + e_handle */
+
+        UINT8_TO_STREAM  (p, GATT_REQ_FIND_TYPE_VALUE);
+        UINT16_TO_STREAM (p, p_value_type->s_handle);
+        UINT16_TO_STREAM (p, p_value_type->e_handle);
+
+        p_buf->len += gatt_build_uuid_to_stream(&p, p_value_type->uuid);
+
+        if (p_value_type->value_len +  p_buf->len > payload_size )
+            len = payload_size - p_buf->len;
+
+        memcpy (p, p_value_type->value, len);
+        p_buf->len += len;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_read_multi_cmd
+**
+** Description      Build a read multiple request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_read_multi_cmd(UINT16 payload_size, UINT16 num_handle, UINT16 *p_handle)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p, i = 0;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)(sizeof(BT_HDR) + num_handle * 2 + 1 + L2CAP_MIN_OFFSET))) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = 1;
+
+        UINT8_TO_STREAM (p, GATT_REQ_READ_MULTI);
+
+        for (i = 0; i < num_handle && p_buf->len + 2 <= payload_size; i ++)
+        {
+            UINT16_TO_STREAM (p, *(p_handle + i));
+            p_buf->len += 2;
+        }
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_handle_cmd
+**
+** Description      Build a read /read blob request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_handle_cmd(UINT8 op_code, UINT16 handle, UINT16 offset)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + 5 + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, op_code);
+        p_buf->len  = 1;
+
+        UINT16_TO_STREAM (p, handle);
+        p_buf->len += 2;
+
+        if (op_code == GATT_REQ_READ_BLOB)
+        {
+            UINT16_TO_STREAM (p, offset);
+            p_buf->len += 2;
+        }
+
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_opcode_cmd
+**
+** Description      Build a  request/response with opcode only.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_opcode_cmd(UINT8 op_code)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + 1 + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+        p_buf->offset = L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, op_code);
+        p_buf->len  = 1;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         attp_build_value_cmd
+**
+** Description      Build a attribute value request
+**
+** Returns          None.
+**
+*******************************************************************************/
+BT_HDR *attp_build_value_cmd (UINT16 payload_size, UINT8 op_code, UINT16 handle,
+                              UINT16 offset, UINT16 len, UINT8 *p_data)
+{
+    BT_HDR      *p_buf = NULL;
+    UINT8       *p, *pp, pair_len, *p_pair_len;
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf((UINT16)(sizeof(BT_HDR) + payload_size + L2CAP_MIN_OFFSET))) != NULL)
+    {
+        p = pp =(UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, op_code);
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = 1;
+
+        if (op_code == GATT_RSP_READ_BY_TYPE)
+        {
+            p_pair_len = p;
+            pair_len = len + 2;
+            UINT8_TO_STREAM (p, pair_len);
+            p_buf->len += 1;
+        }
+        if (op_code != GATT_RSP_READ_BLOB && op_code != GATT_RSP_READ)
+        {
+            UINT16_TO_STREAM (p, handle);
+            p_buf->len += 2;
+        }
+
+        if (op_code == GATT_REQ_PREPARE_WRITE ||op_code == GATT_RSP_PREPARE_WRITE )
+        {
+            UINT16_TO_STREAM (p, offset);
+            p_buf->len += 2;
+        }
+
+        if (len > 0 && p_data != NULL)
+        {
+            /* ensure data not exceed MTU size */
+            if (payload_size - p_buf->len < len)
+            {
+                len = payload_size - p_buf->len;
+                /* update handle value pair length */
+                if (op_code == GATT_RSP_READ_BY_TYPE)
+                    *p_pair_len = (len + 2);
+
+                GATT_TRACE_WARNING1("attribute value too long, to be truncated to %d", len);
+            }
+
+            ARRAY_TO_STREAM (p, p_data, len);
+            p_buf->len += len;
+        }
+    }
+    return p_buf;
+}
+
+/*******************************************************************************
+**
+** Function         attp_send_msg_to_L2CAP
+**
+** Description      Send message to L2CAP.
+**
+*******************************************************************************/
+BOOLEAN  attp_send_msg_to_L2CAP(tGATT_TCB *p_tcb, BT_HDR *p_toL2CAP)
+{
+    UINT16      l2cap_ret;
+
+
+    if (p_tcb->att_lcid == L2CAP_ATT_CID)
+        l2cap_ret = L2CA_SendFixedChnlData (L2CAP_ATT_CID, p_tcb->peer_bda, p_toL2CAP);
+    else
+        l2cap_ret = (UINT16) L2CA_DataWrite (p_tcb->att_lcid, p_toL2CAP);
+
+    if (l2cap_ret == L2CAP_DW_FAILED)
+    {
+        GATT_TRACE_ERROR1("ATT   failed to pass msg:0x%0x to L2CAP",
+            *((UINT8 *)(p_toL2CAP + 1) + p_toL2CAP->offset));
+        GKI_freebuf(p_toL2CAP);
+        return FALSE;
+    }
+    else
+    {
+        return TRUE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         attp_build_sr_msg
+**
+** Description      Build ATT Server PDUs.
+**
+*******************************************************************************/
+BT_HDR *attp_build_sr_msg(tGATT_TCB *p_tcb, UINT8 op_code, tGATT_SR_MSG *p_msg)
+{
+    BT_HDR          *p_cmd = NULL;
+    UINT16          offset = 0;
+
+    switch (op_code)
+    {
+    case GATT_RSP_READ_BLOB:
+        GATT_TRACE_EVENT2 ("ATT_RSP_READ_BLOB: len = %d offset = %d", p_msg->attr_value.len, p_msg->attr_value.offset);
+        offset = p_msg->attr_value.offset;
+
+    case GATT_RSP_PREPARE_WRITE:
+        if (offset == 0)
+            offset = p_msg->attr_value.offset;
+
+    case GATT_RSP_READ_BY_TYPE:
+    case GATT_RSP_READ:
+    case GATT_HANDLE_VALUE_NOTIF:
+    case GATT_HANDLE_VALUE_IND:
+        p_cmd = attp_build_value_cmd(p_tcb->payload_size,
+                                     op_code,
+                                     p_msg->attr_value.handle,
+                                     offset,
+                                     p_msg->attr_value.len,
+                                     p_msg->attr_value.value);
+        break;
+
+    case GATT_RSP_WRITE:
+        p_cmd = attp_build_opcode_cmd(op_code);
+        break;
+
+    case GATT_RSP_ERROR:
+        p_cmd = attp_build_err_cmd(p_msg->error.cmd_code, p_msg->error.handle, p_msg->error.reason);
+        break;
+
+    case GATT_RSP_EXEC_WRITE:
+        p_cmd = attp_build_exec_write_cmd(op_code, 0);
+        break;
+
+    case GATT_RSP_MTU:
+        p_cmd = attp_build_mtu_cmd(op_code, p_msg->mtu);
+        break;
+
+    default:
+        GATT_TRACE_DEBUG1("attp_build_sr_msg: unknown op code = %d", op_code);
+        break;
+    }
+
+    if (!p_cmd)
+        GATT_TRACE_ERROR0("No resources");
+
+    return p_cmd;
+}
+
+/*******************************************************************************
+**
+** Function         attp_send_sr_msg
+**
+** Description      This function sends the server response or indication message
+**                  to client.
+**
+** Parameter        p_tcb: pointer to the connecton control block.
+**                  p_msg: pointer to message parameters structure.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+**
+*******************************************************************************/
+tGATT_STATUS attp_send_sr_msg (tGATT_TCB *p_tcb, BT_HDR *p_msg)
+{
+    tGATT_STATUS     cmd_sent = GATT_NO_RESOURCES;
+
+    if (p_tcb != NULL)
+    {
+        if (p_msg != NULL)
+        {
+            p_msg->offset = L2CAP_MIN_OFFSET;
+
+            if (attp_send_msg_to_L2CAP (p_tcb, p_msg))
+                cmd_sent = GATT_SUCCESS;
+            else
+                cmd_sent = GATT_INTERNAL_ERROR;
+        }
+    }
+    return cmd_sent;
+}
+
+/*******************************************************************************
+**
+** Function         attp_cl_send_cmd
+**
+** Description      Send a ATT command or enqueue it.
+**
+** Returns          TRUE if command sent, otherwise FALSE.
+**
+*******************************************************************************/
+UINT8 attp_cl_send_cmd(tGATT_TCB *p_tcb, UINT16 clcb_idx, UINT8 cmd_code, BT_HDR *p_cmd)
+{
+    UINT8       att_ret = GATT_SUCCESS;
+
+    if (p_tcb != NULL)
+    {
+        cmd_code &= ~GATT_AUTH_SIGN_MASK;
+
+        if (p_tcb->pending_cl_req == p_tcb->next_slot_inq ||
+            cmd_code == GATT_HANDLE_VALUE_CONF)
+        {
+            /* no penindg request or value confirmation */
+            if (attp_send_msg_to_L2CAP(p_tcb, p_cmd))
+            {
+                /* do not enq cmd if handle value confirmation or set request */
+                if (cmd_code != GATT_HANDLE_VALUE_CONF && cmd_code != GATT_CMD_WRITE)
+                {
+                    gatt_start_rsp_timer (p_tcb);
+                    gatt_cmd_enq(p_tcb, clcb_idx, FALSE, cmd_code, NULL);
+                }
+            }
+            else
+                att_ret = GATT_INTERNAL_ERROR;
+        }
+        else
+            gatt_cmd_enq(p_tcb, clcb_idx, TRUE, cmd_code, p_cmd);
+    }
+    else
+        att_ret = GATT_ILLEGAL_PARAMETER;
+
+    return att_ret;
+}
+/*******************************************************************************
+**
+** Function         attp_send_cl_msg
+**
+** Description      This function sends the client request or confirmation message
+**                  to server.
+**
+** Parameter        p_tcb: pointer to the connectino control block.
+**                  clcb_idx: clcb index
+**                  op_code: message op code.
+**                  p_msg: pointer to message parameters structure.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+**
+*******************************************************************************/
+tGATT_STATUS attp_send_cl_msg (tGATT_TCB *p_tcb, UINT16 clcb_idx, UINT8 op_code, tGATT_CL_MSG *p_msg)
+{
+    tGATT_STATUS     status = GATT_NO_RESOURCES;
+    BT_HDR          *p_cmd = NULL;
+    UINT16          offset = 0, handle;
+
+    if (p_tcb != NULL)
+    {
+        switch (op_code)
+        {
+        case GATT_REQ_MTU:
+            if (p_msg->mtu <= GATT_MAX_MTU_SIZE)
+            {
+                p_tcb->payload_size = p_msg->mtu;
+                p_cmd = attp_build_mtu_cmd(GATT_REQ_MTU, p_msg->mtu);
+            }
+            else
+                status = GATT_ILLEGAL_PARAMETER;
+            break;
+
+        case GATT_REQ_FIND_INFO:
+        case GATT_REQ_READ_BY_TYPE:
+        case GATT_REQ_READ_BY_GRP_TYPE:
+            if (GATT_HANDLE_IS_VALID (p_msg->browse.s_handle) &&
+                GATT_HANDLE_IS_VALID (p_msg->browse.e_handle)  &&
+                p_msg->browse.s_handle <= p_msg->browse.e_handle)
+            {
+                p_cmd = attp_build_browse_cmd(op_code,
+                                            p_msg->browse.s_handle,
+                                            p_msg->browse.e_handle,
+                                            p_msg->browse.uuid);
+            }
+            else
+                status = GATT_ILLEGAL_PARAMETER;
+            break;
+
+        case GATT_REQ_READ_BLOB:
+            offset = p_msg->read_blob.offset;
+            /* fall through */
+        case GATT_REQ_READ:
+            handle = (op_code == GATT_REQ_READ) ? p_msg->handle: p_msg->read_blob.handle;
+            /*  handle checking */
+            if (GATT_HANDLE_IS_VALID (handle))
+            {
+                p_cmd = attp_build_handle_cmd(op_code, handle, offset);
+            }
+            else
+                status = GATT_ILLEGAL_PARAMETER;
+            break;
+
+        case GATT_HANDLE_VALUE_CONF:
+            p_cmd = attp_build_opcode_cmd(op_code);
+            break;
+
+        case GATT_REQ_PREPARE_WRITE:
+            offset = p_msg->attr_value.offset;
+            /* fall through */
+        case GATT_REQ_WRITE:
+        case GATT_CMD_WRITE:
+        case GATT_SIGN_CMD_WRITE:
+            if (GATT_HANDLE_IS_VALID (p_msg->attr_value.handle))
+            {
+                p_cmd = attp_build_value_cmd (p_tcb->payload_size,
+                                              op_code, p_msg->attr_value.handle,
+                                              offset,
+                                              p_msg->attr_value.len,
+                                              p_msg->attr_value.value);
+            }
+            else
+                status = GATT_ILLEGAL_PARAMETER;
+            break;
+
+        case GATT_REQ_EXEC_WRITE:
+            p_cmd = attp_build_exec_write_cmd(op_code, p_msg->exec_write);
+            break;
+
+        case GATT_REQ_FIND_TYPE_VALUE:
+            p_cmd = attp_build_read_handles_cmd(p_tcb->payload_size, &p_msg->find_type_value);
+            break;
+
+        case GATT_REQ_READ_MULTI:
+            p_cmd = attp_build_read_multi_cmd(p_tcb->payload_size,
+                                              p_msg->read_multi.num_handles,
+                                              p_msg->read_multi.handles);
+            break;
+
+        default:
+            break;
+        }
+
+        if (p_cmd != NULL)
+            status = attp_cl_send_cmd(p_tcb, clcb_idx, op_code, p_cmd);
+
+    }
+    else
+    {
+        GATT_TRACE_ERROR0("Peer device not connected");
+    }
+
+    return status;
+}
+#endif
diff --git a/stack/gatt/gatt_api.c b/stack/gatt/gatt_api.c
new file mode 100644
index 0000000..7845f3c
--- /dev/null
+++ b/stack/gatt/gatt_api.c
@@ -0,0 +1,1555 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains GATT interface functions
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+
+
+#if defined(BTA_GATT_INCLUDED) && (BTA_GATT_INCLUDED == TRUE)
+
+#include "gki.h"
+#include <stdio.h>
+#include <string.h>
+#include "gatt_api.h"
+#include "gatt_int.h"
+#include "l2c_api.h"
+#include "btm_int.h"
+
+
+/*******************************************************************************
+**
+** Function         GATT_SetTraceLevel
+**
+** Description      This function sets the trace level.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+**                  Input Parameters:
+**                      level:  The level to set the GATT tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+UINT8 GATT_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        gatt_cb.trace_level = new_level;
+
+    return(gatt_cb.trace_level);
+}
+
+/*****************************************************************************
+**
+**                  GATT SERVER API
+**
+******************************************************************************/
+/*******************************************************************************
+**
+** Function         GATTS_AddHandleRange
+**
+** Description      This function add the allocated handles range for the specifed
+**                  application UUID, service UUID and service instance
+**
+** Parameter        p_hndl_range:   pointer to allocated handles information
+**
+** Returns          TRUE if handle range is added sucessfully; otherwise FALSE.
+**
+*******************************************************************************/
+
+BOOLEAN GATTS_AddHandleRange(tGATTS_HNDL_RANGE *p_hndl_range)
+{
+    tGATT_HDL_LIST_ELEM *p_buf;
+    BOOLEAN status= FALSE;
+
+    if ((p_buf = gatt_alloc_hdl_buffer()) != NULL)
+    {
+        p_buf->asgn_range = *p_hndl_range;
+        status  = gatt_add_an_item_to_list(&gatt_cb.hdl_list_info, p_buf);
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         GATTS_NVRegister
+**
+** Description      Application manager calls this function to register for
+**                  NV save callback function.  There can be one and only one
+**                  NV save callback function.
+**
+** Parameter        p_cb_info : callback informaiton
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN  GATTS_NVRegister (tGATT_APPL_INFO *p_cb_info)
+{
+    BOOLEAN status= FALSE;
+    if (p_cb_info)
+    {
+        gatt_cb.cb_info = *p_cb_info;
+        status = TRUE;
+        gatt_init_srv_chg();
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_CreateService
+**
+** Description      This function is called to reserve a block of handles for a service.
+**
+**                  *** It should be called only once per service instance  ***
+**
+** Parameter        gatt_if       : application if
+**                  p_svc_uuid    : service UUID
+**                  svc_inst      : instance of the service inside the application
+**                  num_handles   : number of handles needed by the service.
+**                  is_pri        : is a primary service or not.
+**
+** Returns          service handle if sucessful, otherwise 0.
+**
+*******************************************************************************/
+UINT16 GATTS_CreateService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid,
+                            UINT16 svc_inst, UINT16 num_handles, BOOLEAN is_pri)
+{
+
+    tGATT_HDL_LIST_INFO     *p_list_info= &gatt_cb.hdl_list_info;
+    tGATT_HDL_LIST_ELEM     *p_list=NULL;
+    UINT16                  s_hdl=0;
+    BOOLEAN                 save_hdl=FALSE;
+    tGATTS_PENDING_NEW_SRV_START      *p_buf=NULL;
+    tGATT_REG              *p_reg = gatt_get_regcb(gatt_if);
+    tBT_UUID     *p_app_uuid128;
+
+
+    GATT_TRACE_API0 ("GATTS_CreateService" );
+
+    if (p_reg == NULL)
+    {
+        GATT_TRACE_ERROR1 ("Inavlid gatt_if=%d", gatt_if);
+        return(0);
+    }
+
+    p_app_uuid128 = &p_reg->app_uuid128;
+
+    if ((p_list = gatt_find_hdl_buffer_by_app_id(p_app_uuid128, p_svc_uuid, svc_inst)) != NULL)
+    {
+        s_hdl = p_list->asgn_range.s_handle;
+        GATT_TRACE_DEBUG0 ("Service already been created!!");
+    }
+    else
+    {
+        if ( (p_svc_uuid->len == LEN_UUID_16) && (p_svc_uuid->uu.uuid16 == UUID_SERVCLASS_GATT_SERVER))
+        {
+            s_hdl=  gatt_cb.hdl_cfg.gatt_start_hdl;
+        }
+        else if ((p_svc_uuid->len == LEN_UUID_16) && (p_svc_uuid->uu.uuid16 == UUID_SERVCLASS_GAP_SERVER))
+        {
+            s_hdl= gatt_cb.hdl_cfg.gap_start_hdl;
+        }
+        else
+        {
+            p_list = p_list_info->p_first;
+
+            if (p_list)
+            {
+                s_hdl = p_list->asgn_range.e_handle + 1;
+            }
+
+            if (s_hdl < gatt_cb.hdl_cfg.app_start_hdl)
+            {
+
+                s_hdl= gatt_cb.hdl_cfg.app_start_hdl;
+            }
+            save_hdl = TRUE;
+        }
+
+        /* check for space */
+        if (num_handles > (0xFFFF - s_hdl + 1))
+        {
+            GATT_TRACE_ERROR2 ("GATTS_ReserveHandles: no handles, s_hdl: %u  needed: %u", s_hdl, num_handles);
+            return(0);
+        }
+
+        if ( (p_list = gatt_alloc_hdl_buffer()) == NULL)
+        {
+            /* No free entry */
+            GATT_TRACE_ERROR0 ("GATTS_ReserveHandles: no free handle blocks");
+            return(0);
+        }
+
+        p_list->asgn_range.app_uuid128 = *p_app_uuid128;
+        p_list->asgn_range.svc_uuid    = *p_svc_uuid;
+        p_list->asgn_range.svc_inst    = svc_inst;
+        p_list->asgn_range.s_handle    = s_hdl;
+        p_list->asgn_range.e_handle    = s_hdl+num_handles-1;
+        p_list->asgn_range.is_primary  = is_pri;
+
+        gatt_add_an_item_to_list(p_list_info, p_list);
+
+        if (save_hdl)
+        {
+            if (gatt_cb.cb_info.p_nv_save_callback)
+                (*gatt_cb.cb_info.p_nv_save_callback)(TRUE, &p_list->asgn_range);
+            /* add a pending new  service change item to the list */
+            if ( (p_buf = gatt_add_pending_new_srv_start(&p_list->asgn_range)) == NULL)
+            {
+                /* No free entry */
+                GATT_TRACE_ERROR0 ("gatt_add_pending_new_srv_start: no free blocks");
+
+                if (p_list)
+                {
+                    gatt_remove_an_item_from_list(p_list_info, p_list);
+                    gatt_free_hdl_buffer(p_list);
+                }
+                return(0);
+            }
+
+            GATT_TRACE_DEBUG0 ("Add a new srv chg item");
+        }
+    }
+
+    if (!gatts_init_service_db(&p_list->svc_db, *p_svc_uuid, is_pri, s_hdl , num_handles))
+    {
+        GATT_TRACE_ERROR0 ("GATTS_ReserveHandles: service DB initialization failed");
+        if (p_list)
+        {
+            gatt_remove_an_item_from_list(p_list_info, p_list);
+            gatt_free_hdl_buffer(p_list);
+        }
+
+        if (p_buf)
+            GKI_freebuf (GKI_remove_from_queue (&gatt_cb.pending_new_srv_start_q, p_buf));
+        return(0);
+    }
+
+    GATT_TRACE_DEBUG6 ("GATTS_CreateService(success): handles needed:%u s_hdl=%u e_hdl=%u %s[%x] is_primary=%d",
+                       num_handles, p_list->asgn_range.s_handle , p_list->asgn_range.e_handle,
+                       ((p_list->asgn_range.svc_uuid.len == 2) ? "uuid16": "uuid128" ),
+                       p_list->asgn_range.svc_uuid.uu.uuid16,
+                       p_list->asgn_range.is_primary);
+
+    return(s_hdl);
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_AddIncludeService
+**
+** Description      This function is called to add an included service.
+**
+** Parameter        service_handle : To which service this included service is added to.
+**                  include_svc_handle    : included service handle.
+**
+** Returns          included service attribute handle. If 0, add included service
+**                  fail.
+**
+*******************************************************************************/
+UINT16 GATTS_AddIncludeService (UINT16 service_handle, UINT16 include_svc_handle)
+
+{
+    tGATT_HDL_LIST_ELEM  *p_decl, *p_incl_decl;
+
+    if ((p_decl = gatt_find_hdl_buffer_by_handle(service_handle)) == NULL)
+    {
+        GATT_TRACE_DEBUG0("Service not created");
+        return 0;
+    }
+    if ((p_incl_decl = gatt_find_hdl_buffer_by_handle(include_svc_handle)) == NULL)
+    {
+        GATT_TRACE_DEBUG0("Included Service not created");
+        return 0;
+    }
+
+    return gatts_add_included_service(&p_decl->svc_db,
+                                      p_incl_decl->asgn_range.s_handle,
+                                      p_incl_decl->asgn_range.e_handle,
+                                      p_incl_decl->asgn_range.svc_uuid);
+}
+/*******************************************************************************
+**
+** Function         GATTS_AddCharacteristic
+**
+** Description      This function is called to add a characteristic into a service.
+**                  It will add a characteristic declaration and characteristic
+**                  value declaration into the service database identified by the
+**                  service handle.
+**
+** Parameter        service_handle : To which service this included service is added to.
+**                  char_uuid : Characteristic UUID.
+**                  perm      : Characteristic value declaration attribute permission.
+**                  property  : Characteristic Properties
+**
+** Returns          Characteristic value declaration attribute handle. 0 if failed.
+**
+*******************************************************************************/
+UINT16 GATTS_AddCharacteristic (UINT16 service_handle, tBT_UUID *p_char_uuid,
+                                tGATT_PERM perm,tGATT_CHAR_PROP property)
+{
+    tGATT_HDL_LIST_ELEM  *p_decl;
+
+    if ((p_decl = gatt_find_hdl_buffer_by_handle(service_handle)) == NULL)
+    {
+        GATT_TRACE_DEBUG0("Service not created");
+        return 0;
+    }
+    /* data validity checking */
+    if (  ((property & GATT_CHAR_PROP_BIT_AUTH) && !(perm & GATT_WRITE_SIGNED_PERM)) ||
+          ((perm & GATT_WRITE_SIGNED_PERM) && !(property & GATT_CHAR_PROP_BIT_AUTH)) )
+    {
+        GATT_TRACE_DEBUG2("Invalid configuration property=0x%x perm=0x%x ", property, perm);
+        return 0;
+    }
+
+    return gatts_add_characteristic(&p_decl->svc_db,
+                                    perm,
+                                    property,
+                                    p_char_uuid);
+}
+/*******************************************************************************
+**
+** Function         GATTS_AddCharDescriptor
+**
+** Description      This function is called to add a characteristic descriptor
+**                  into a service database. Add descriptor should follow add char
+**                  to which it belongs, and next add char should be done only
+**                  after all add descriptors for the previous char.
+**
+** Parameter        service_handle  : To which service this characteristic descriptor
+**                                    is added to.
+**                  perm            : Characteristic value declaration attribute
+**                                    permission.
+**                  p_descr_uuid    : Characteristic descriptor UUID
+**
+** Returns         Characteristic descriptor attribute handle. 0 if add
+**                 characteristic descriptor failed.
+**
+*******************************************************************************/
+UINT16 GATTS_AddCharDescriptor (UINT16 service_handle,
+                                 tGATT_PERM perm,
+                                 tBT_UUID  * p_descr_uuid)
+{
+    tGATT_HDL_LIST_ELEM  *p_decl;
+
+    if ((p_decl = gatt_find_hdl_buffer_by_handle(service_handle)) == NULL)
+    {
+        GATT_TRACE_DEBUG0("Service not created");
+        return 0;
+    }
+    if (p_descr_uuid == NULL ||
+        (p_descr_uuid->len != LEN_UUID_128 && p_descr_uuid->len !=  LEN_UUID_16))
+    {
+        GATT_TRACE_DEBUG0("Illegal parameter");
+        return 0;
+    }
+
+    return gatts_add_char_descr(&p_decl->svc_db,
+                                perm,
+                                p_descr_uuid);
+
+}
+/*******************************************************************************
+**
+** Function         GATTS_DeleteService
+**
+** Description      This function is called to delete a service.
+**
+** Parameter        gatt_if       : application interface
+**                  p_svc_uuid    : service UUID
+**                  svc_inst      : instance of the service inside the application
+**
+** Returns          TRUE if operation succeed, FALSE if handle block was not found.
+**
+*******************************************************************************/
+BOOLEAN GATTS_DeleteService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid, UINT16 svc_inst)
+{
+
+    tGATT_HDL_LIST_INFO             *p_list_info= &gatt_cb.hdl_list_info;
+    tGATT_HDL_LIST_ELEM             *p_list=NULL;
+    UINT8                           i_sreg;
+    tGATTS_PENDING_NEW_SRV_START    *p_buf;
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tBT_UUID *p_app_uuid128;
+
+    GATT_TRACE_DEBUG0 ("GATTS_DeleteService");
+
+    if (p_reg == NULL)
+    {
+        GATT_TRACE_ERROR0 ("Applicaiton not foud");
+        return(FALSE);
+    }
+    p_app_uuid128 = &p_reg->app_uuid128;
+
+    if ((p_list = gatt_find_hdl_buffer_by_app_id(p_app_uuid128, p_svc_uuid, svc_inst)) == NULL)
+    {
+        GATT_TRACE_ERROR0 ("No Service found");
+        return(FALSE);
+    }
+
+    if ( (p_buf = gatt_sr_is_new_srv_chg(&p_list->asgn_range.app_uuid128,
+                                         &p_list->asgn_range.svc_uuid,
+                                         p_list->asgn_range.svc_inst)) != NULL)
+    {
+        GATT_TRACE_DEBUG0 ("Delete a new service changed item - the service has not yet started");
+        GKI_freebuf (GKI_remove_from_queue (&gatt_cb.pending_new_srv_start_q, p_buf));
+    }
+    else
+    {
+        gatt_proc_srv_chg();
+    }
+
+    if ((i_sreg = gatt_sr_find_i_rcb_by_app_id (p_app_uuid128,
+                                                p_svc_uuid,
+                                                svc_inst)) != GATT_MAX_SR_PROFILES)
+    {
+        GATTS_StopService(gatt_cb.sr_reg[i_sreg].s_hdl);
+    }
+
+    GATT_TRACE_DEBUG2 ("released handles s_hdl=%u e_hdl=%u",
+                       p_list->asgn_range.s_handle , p_list->asgn_range.e_handle  );
+
+    if ( (p_list->asgn_range.s_handle >= gatt_cb.hdl_cfg.app_start_hdl)
+         && gatt_cb.cb_info.p_nv_save_callback)
+        (*gatt_cb.cb_info.p_nv_save_callback)(FALSE, &p_list->asgn_range);
+
+    gatt_remove_an_item_from_list(p_list_info, p_list);
+    gatt_free_hdl_buffer(p_list);
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_StartService
+**
+** Description      This function is called to start a service with GATT
+**
+** Parameter        gatt_if : service handle.
+**                  p_cback       : application service callback functions.
+**                  sup_transport : supported transport(s) for this primary service
+**
+** return           GATT_SUCCESS if sucessfully started; otherwise error code.
+**
+*******************************************************************************/
+tGATT_STATUS GATTS_StartService (tGATT_IF gatt_if, UINT16 service_handle,
+                                 tGATT_TRANSPORT sup_transport)
+{
+    tGATT_SR_REG            *p_sreg;
+    tGATT_HDL_LIST_ELEM      *p_list=NULL;
+    UINT8                    i_sreg;
+    tBT_UUID                *p_uuid;
+    tGATT_REG              *p_reg = gatt_get_regcb(gatt_if);
+
+    tGATTS_PENDING_NEW_SRV_START *p_buf;
+
+    GATT_TRACE_API0 ("GATTS_StartService");
+
+    if (p_reg == NULL)
+    {
+        /* Not found  */
+        GATT_TRACE_ERROR0 ("Applicaiton not found ");
+        return GATT_NOT_FOUND;
+    }
+
+    if ((p_list = gatt_find_hdl_buffer_by_handle(service_handle)) == NULL)
+    {
+        /* Not found  */
+        GATT_TRACE_ERROR0 ("no service found");
+        return GATT_NOT_FOUND;
+    }
+
+    if (gatt_sr_find_i_rcb_by_app_id (&p_list->asgn_range.app_uuid128,
+                                      &p_list->asgn_range.svc_uuid,
+                                      p_list->asgn_range.svc_inst) != GATT_MAX_SR_PROFILES)
+    {
+        GATT_TRACE_ERROR0 ("Duplicate Service start - Service already started");
+        return GATT_SERVICE_STARTED;
+    }
+
+    /*this is a new application servoce start */
+    if ((i_sreg = gatt_sr_alloc_rcb(p_list)) ==  GATT_MAX_SR_PROFILES)
+    {
+        GATT_TRACE_ERROR0 ("GATTS_StartService: no free server registration block");
+        return GATT_NO_RESOURCES;
+    }
+
+    p_sreg = &gatt_cb.sr_reg[i_sreg];
+    p_sreg->gatt_if = gatt_if;
+
+    switch (sup_transport)
+    {
+        case GATT_TRANSPORT_BR_EDR:
+        case GATT_TRANSPORT_LE_BR_EDR:
+            if (p_sreg->type == GATT_UUID_PRI_SERVICE)
+            {
+                p_uuid = gatts_get_service_uuid (p_sreg->p_db);
+
+                p_sreg->sdp_handle = gatt_add_sdp_record(p_uuid, p_sreg->s_hdl, p_sreg->e_hdl);
+            }
+            break;
+        default:
+            break;
+    }
+
+    gatts_update_srv_list_elem(i_sreg, p_sreg->s_hdl,
+                               p_list->asgn_range.is_primary);
+
+    gatt_add_a_srv_to_list(&gatt_cb.srv_list_info, &gatt_cb.srv_list[i_sreg]);
+
+    GATT_TRACE_DEBUG1 ("allocated i_sreg=%d ",i_sreg);
+
+    GATT_TRACE_DEBUG5 ("s_hdl=%d e_hdl=%d type=0x%x svc_inst=%d sdp_hdl=0x%x",
+                       p_sreg->s_hdl,p_sreg->e_hdl,
+                       p_sreg->type,  p_sreg->service_instance,
+                       p_sreg->sdp_handle);
+
+
+    if ( (p_buf = gatt_sr_is_new_srv_chg(&p_list->asgn_range.app_uuid128,
+                                         &p_list->asgn_range.svc_uuid,
+                                         p_list->asgn_range.svc_inst)) != NULL)
+    {
+        gatt_proc_srv_chg();
+        /* remove the new service element after the srv changed processing is completed*/
+
+        GKI_freebuf (GKI_remove_from_queue (&gatt_cb.pending_new_srv_start_q, p_buf));
+    }
+    return GATT_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_StopService
+**
+** Description      This function is called to stop a service
+**
+** Parameter         service_handle : this is the start handle of a service
+**
+** Returns          None.
+**
+*******************************************************************************/
+void GATTS_StopService (UINT16 service_handle)
+{
+    UINT8           ii = gatt_sr_find_i_rcb_by_handle(service_handle);
+
+    GATT_TRACE_API1("GATTS_StopService %u", service_handle);
+
+    /* Index 0 is reserved for GATT, and is never stopped */
+    if ( (ii > 0) && (ii < GATT_MAX_SR_PROFILES) && (gatt_cb.sr_reg[ii].in_use) )
+    {
+        if (gatt_cb.sr_reg[ii].sdp_handle)
+        {
+            SDP_DeleteRecord(gatt_cb.sr_reg[ii].sdp_handle);
+        }
+        gatt_remove_a_srv_from_list(&gatt_cb.srv_list_info, &gatt_cb.srv_list[ii]);
+        gatt_cb.srv_list[ii].in_use = FALSE;
+        memset (&gatt_cb.sr_reg[ii], 0, sizeof(tGATT_SR_REG));
+    }
+    else
+    {
+        GATT_TRACE_ERROR1("GATTS_StopService service_handle: %u is not in use", service_handle);
+    }
+}
+/*******************************************************************************
+**
+** Function         GATTs_HandleValueIndication
+**
+** Description      This function sends a handle value indication to a client.
+**
+** Parameter        conn_id: connection identifier.
+**                  attr_handle: Attribute handle of this handle value indication.
+**                  val_len: Length of the indicated attribute value.
+**                  p_val: Pointer to the indicated attribute value data.
+**
+** Returns          GATT_SUCCESS if sucessfully sent or queued; otherwise error code.
+**
+*******************************************************************************/
+tGATT_STATUS GATTS_HandleValueIndication (UINT16 conn_id,  UINT16 attr_handle, UINT16 val_len, UINT8 *p_val)
+{
+    tGATT_STATUS    cmd_status = GATT_ILLEGAL_PARAMETER;
+
+    tGATT_VALUE      indication;
+    BT_HDR          *p_msg;
+    tGATT_VALUE     *p_buf;
+    tGATT_IF         gatt_if = GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+
+
+    GATT_TRACE_API0 ("GATTS_HandleValueIndication");
+    if ( (p_reg == NULL) || (p_tcb == NULL))
+    {
+        GATT_TRACE_ERROR1 ("GATTS_HandleValueIndication Unknown  conn_id: %u ", conn_id);
+        return(tGATT_STATUS) GATT_INVALID_CONN_ID;
+    }
+    indication.conn_id  = conn_id;
+    indication.handle   = attr_handle;
+    indication.len      = val_len;
+    memcpy (indication.value, p_val, val_len);
+    indication.auth_req = GATT_AUTH_REQ_NONE;
+
+    if (GATT_HANDLE_IS_VALID (attr_handle)  )
+    {
+        if (GATT_HANDLE_IS_VALID(p_tcb->indicate_handle))
+        {
+            GATT_TRACE_DEBUG0 ("Add a pending indication");
+            if ((p_buf = gatt_add_pending_ind(p_tcb, &indication)) !=NULL)
+            {
+                cmd_status = GATT_SUCCESS;
+            }
+            else
+            {
+                cmd_status = GATT_NO_RESOURCES;
+            }
+        }
+        else
+        {
+
+            if ( (p_msg = attp_build_sr_msg (p_tcb, GATT_HANDLE_VALUE_IND, (tGATT_SR_MSG *)&indication)) != NULL)
+            {
+                cmd_status = attp_send_sr_msg (p_tcb, p_msg);
+
+                if (cmd_status == GATT_SUCCESS)
+                {
+                    p_tcb->indicate_handle = indication.handle;
+                    gatt_start_conf_timer(p_tcb);
+                }
+            }
+        }
+    }
+    return cmd_status;
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_HandleValueNotification
+**
+** Description      This function sends a handle value notification to a client.
+**
+** Parameter        conn_id: connection identifier.
+**                  attr_handle: Attribute handle of this handle value indication.
+**                  val_len: Length of the indicated attribute value.
+**                  p_val: Pointer to the indicated attribute value data.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+*******************************************************************************/
+tGATT_STATUS GATTS_HandleValueNotification (UINT16 conn_id, UINT16 attr_handle,
+                                            UINT16 val_len, UINT8 *p_val)
+{
+    tGATT_STATUS    cmd_sent = GATT_ILLEGAL_PARAMETER;
+    BT_HDR          *p_buf;
+    tGATT_VALUE     notif;
+    tGATT_IF         gatt_if = GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+
+    GATT_TRACE_API0 ("GATTS_HandleValueNotification");
+
+    if ( (p_reg == NULL) || (p_tcb == NULL))
+    {
+        GATT_TRACE_ERROR1 ("GATTS_HandleValueNotification Unknown  conn_id: %u ", conn_id);
+        return(tGATT_STATUS) GATT_INVALID_CONN_ID;
+    }
+
+    if (GATT_HANDLE_IS_VALID (attr_handle))
+    {
+        notif.handle    = attr_handle;
+        notif.len       = val_len;
+        memcpy (notif.value, p_val, val_len);
+        notif.auth_req = GATT_AUTH_REQ_NONE;;
+
+        p_buf = attp_build_sr_msg (p_tcb, GATT_HANDLE_VALUE_NOTIF, (tGATT_SR_MSG *)&notif);
+        cmd_sent = attp_send_sr_msg (p_tcb, p_buf);
+    }
+    return cmd_sent;
+}
+
+/*******************************************************************************
+**
+** Function         GATTS_SendRsp
+**
+** Description      This function sends the server response to client.
+**
+** Parameter        conn_id: connection identifier.
+**                  trans_id: transaction id
+**                  status: response status
+**                  p_msg: pointer to message parameters structure.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+*******************************************************************************/
+tGATT_STATUS GATTS_SendRsp (UINT16 conn_id,  UINT32 trans_id,
+                            tGATT_STATUS status, tGATTS_RSP *p_msg)
+{
+    tGATT_STATUS cmd_sent = GATT_ILLEGAL_PARAMETER;
+    tGATT_IF         gatt_if = GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+
+    GATT_TRACE_API3 ("GATTS_SendRsp: conn_id: %u  trans_id: %u  Status: 0x%04x",
+                     conn_id, trans_id, status);
+
+    if ( (p_reg == NULL) || (p_tcb == NULL))
+    {
+        GATT_TRACE_ERROR1 ("GATTS_SendRsp Unknown  conn_id: %u ", conn_id);
+        return(tGATT_STATUS) GATT_INVALID_CONN_ID;
+    }
+
+    if (p_tcb->sr_cmd.trans_id != trans_id)
+    {
+        GATT_TRACE_ERROR2 ("GATTS_SendRsp conn_id: %u  waiting for op_code = %02x",
+                           conn_id, p_tcb->sr_cmd.op_code);
+
+        return(GATT_WRONG_STATE);
+    }
+    /* Process App response */
+    cmd_sent = gatt_sr_process_app_rsp (p_tcb,  gatt_if, trans_id, p_tcb->sr_cmd.op_code, status, p_msg);
+
+    return cmd_sent;
+}
+
+/*******************************************************************************/
+/* GATT Profile Srvr Functions */
+/*******************************************************************************/
+
+/*******************************************************************************/
+/*                                                                             */
+/*                   GATT CLIENT APIs                                          */
+/*                                                                             */
+/*******************************************************************************/
+
+
+/*******************************************************************************
+**
+** Function         GATTC_ConfigureMTU
+**
+** Description      This function is called to configure the ATT MTU size.
+**
+** Parameters       conn_id: connection identifier.
+**                  mtu    - attribute MTU size..
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_ConfigureMTU (UINT16 conn_id, UINT16 mtu)
+{
+    UINT8           ret = GATT_NO_RESOURCES;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+    tGATT_CLCB    *p_clcb;
+
+    GATT_TRACE_API2 ("GATTC_ConfigureMTU conn_id=%d mtu=%d", conn_id, mtu );
+
+    // Validate that the link is BLE, not BR/EDR
+    // ????
+
+    if ( (p_tcb == NULL) || (p_reg==NULL) || (mtu < GATT_DEF_BLE_MTU_SIZE) || (mtu > GATT_MAX_MTU_SIZE))
+    {
+        return GATT_ILLEGAL_PARAMETER;
+    }
+
+    if (gatt_is_clcb_allocated(conn_id))
+    {
+        GATT_TRACE_ERROR1("GATTC_ConfigureMTU GATT_BUSY conn_id = %d", conn_id);
+        return GATT_BUSY;
+    }
+
+    if ((p_clcb = gatt_clcb_alloc(conn_id)) != NULL)
+    {
+        p_clcb->p_tcb->payload_size = mtu;
+        p_clcb->operation = GATTC_OPTYPE_CONFIG;
+
+        ret = attp_send_cl_msg (p_clcb->p_tcb, p_clcb->clcb_idx, GATT_REQ_MTU, (tGATT_CL_MSG *)&mtu);
+    }
+
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         GATTC_Discover
+**
+** Description      This function is called to do a discovery procedure on ATT server.
+**
+** Parameters       conn_id: connection identifier.
+**                  disc_type:discovery type.
+**                  p_param: parameters of discovery requirement.
+**
+** Returns          GATT_SUCCESS if command received/sent successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_Discover (UINT16 conn_id, tGATT_DISC_TYPE disc_type,
+                             tGATT_DISC_PARAM *p_param)
+{
+    tGATT_STATUS    status = GATT_SUCCESS;
+    tGATT_CLCB      *p_clcb;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+
+    GATT_TRACE_API2 ("GATTC_Discover conn_id=%d disc_type=%d",conn_id, disc_type);
+
+    if ( (p_tcb == NULL) || (p_reg==NULL) ||(p_param == NULL) ||
+         (disc_type >= GATT_DISC_MAX))
+    {
+        GATT_TRACE_ERROR2("GATTC_Discover Illegal param: disc_type %d conn_id = %d", disc_type, conn_id);
+        return GATT_ILLEGAL_PARAMETER;
+    }
+
+
+    if (gatt_is_clcb_allocated(conn_id))
+    {
+        GATT_TRACE_ERROR1("GATTC_Discover GATT_BUSY conn_id = %d", conn_id);
+        return GATT_BUSY;
+    }
+
+
+    if ((p_clcb = gatt_clcb_alloc(conn_id)) != NULL )
+    {
+        if (!GATT_HANDLE_IS_VALID(p_param->s_handle) ||
+            !GATT_HANDLE_IS_VALID(p_param->e_handle) ||
+            /* search by type does not have a valid UUID param */
+            (disc_type == GATT_DISC_SRVC_BY_UUID &&
+             p_param->service.len == 0))
+        {
+            return GATT_ILLEGAL_PARAMETER;
+        }
+
+        p_clcb->operation  = GATTC_OPTYPE_DISCOVERY;
+        p_clcb->op_subtype = disc_type;
+        p_clcb->s_handle   = p_param->s_handle;
+        p_clcb->e_handle   = p_param->e_handle;
+        p_clcb->uuid       = p_param->service;
+
+        gatt_act_discovery(p_clcb);
+    }
+    else
+    {
+        status = GATT_NO_RESOURCES;
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         GATTC_Read
+**
+** Description      This function is called to read the value of an attribute from
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  type    - attribute read type.
+**                  p_read  - read operation parameters.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_Read (UINT16 conn_id, tGATT_READ_TYPE type, tGATT_READ_PARAM *p_read)
+{
+    tGATT_STATUS status = GATT_SUCCESS;
+    tGATT_CLCB          *p_clcb;
+    tGATT_READ_MULTI    *p_read_multi;
+    tGATT_IF            gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8               tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB           *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG           *p_reg = gatt_get_regcb(gatt_if);
+
+
+    GATT_TRACE_API2 ("GATTC_Read conn_id=%d type=%d", conn_id, type);
+
+    if ( (p_tcb == NULL) || (p_reg==NULL) || (p_read == NULL) || ((type >= GATT_READ_MAX) || (type == 0)))
+    {
+        GATT_TRACE_ERROR2("GATT_Read Illegal param: conn_id %d, type 0%d,", conn_id, type);
+        return GATT_ILLEGAL_PARAMETER;
+    }
+
+    if (gatt_is_clcb_allocated(conn_id))
+    {
+        GATT_TRACE_ERROR1("GATTC_Read GATT_BUSY conn_id = %d", conn_id);
+        return GATT_BUSY;
+    }
+
+    if ( (p_clcb = gatt_clcb_alloc(conn_id)) != NULL  )
+    {
+        p_clcb->operation = GATTC_OPTYPE_READ;
+        p_clcb->op_subtype = type;
+        p_clcb->auth_req = p_read->by_handle.auth_req;
+        p_clcb->counter = 0;
+
+        switch (type)
+        {
+            case GATT_READ_BY_TYPE:
+            case GATT_READ_CHAR_VALUE:
+                p_clcb->s_handle = p_read->service.s_handle;
+                p_clcb->e_handle = p_read->service.e_handle;
+                memcpy(&p_clcb->uuid, &p_read->service.uuid, sizeof(tBT_UUID));
+                break;
+            case GATT_READ_MULTIPLE:
+                p_clcb->s_handle = 0;
+                /* copy multiple handles in CB */
+                p_read_multi = (tGATT_READ_MULTI *)GKI_getbuf(sizeof(tGATT_READ_MULTI));
+                p_clcb->p_attr_buf = (UINT8*)p_read_multi;
+                memcpy (p_read_multi, &p_read->read_multiple, sizeof(tGATT_READ_MULTI));
+            case GATT_READ_BY_HANDLE:
+            case GATT_READ_PARTIAL:
+                memset(&p_clcb->uuid, 0, sizeof(tBT_UUID));
+                p_clcb->s_handle = p_read->by_handle.handle;
+
+                if (type == GATT_READ_PARTIAL)
+                {
+                    p_clcb->counter = p_read->partial.offset;
+                }
+
+                break;
+            default:
+                break;
+        }
+        /* start security check */
+        if (gatt_security_check_start(p_clcb) == FALSE)
+        {
+            status = GATT_NO_RESOURCES;
+            gatt_clcb_dealloc(p_clcb);
+        }
+    }
+    else
+    {
+        status = GATT_NO_RESOURCES;
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         GATTC_Write
+**
+** Description      This function is called to write the value of an attribute to
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  type    - attribute write type.
+**                  p_write  - write operation parameters.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_Write (UINT16 conn_id, tGATT_WRITE_TYPE type, tGATT_VALUE *p_write)
+{
+    tGATT_STATUS status = GATT_SUCCESS;
+    tGATT_CLCB      *p_clcb;
+    tGATT_VALUE     *p;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+    if ( (p_tcb == NULL) || (p_reg==NULL) || (p_write == NULL) ||
+         ((type != GATT_WRITE) && (type != GATT_WRITE_PREPARE) && (type != GATT_WRITE_NO_RSP)) )
+    {
+        GATT_TRACE_ERROR2("GATT_Write Illegal param: conn_id %d, type 0%d,", conn_id, type);
+        return GATT_ILLEGAL_PARAMETER;
+    }
+
+    if (gatt_is_clcb_allocated(conn_id))
+    {
+        GATT_TRACE_ERROR1("GATTC_Write GATT_BUSY conn_id = %d", conn_id);
+        return GATT_BUSY;
+    }
+
+    if ((p_clcb = gatt_clcb_alloc(conn_id)) != NULL )
+    {
+        p_clcb->operation  = GATTC_OPTYPE_WRITE;
+        p_clcb->op_subtype = type;
+        p_clcb->auth_req = p_write->auth_req;
+
+        if (( p_clcb->p_attr_buf = (UINT8 *)GKI_getbuf((UINT16)sizeof(tGATT_VALUE))) != NULL)
+        {
+            memcpy(p_clcb->p_attr_buf, (void *)p_write, sizeof(tGATT_VALUE));
+
+            p =  (tGATT_VALUE *)p_clcb->p_attr_buf;
+            if (type == GATT_WRITE_PREPARE)
+            {
+                p_clcb->start_offset = p_write->offset;
+                p->offset = 0;
+            }
+
+            if (gatt_security_check_start(p_clcb) == FALSE)
+            {
+                status = GATT_NO_RESOURCES;
+            }
+        }
+        else
+        {
+            status = GATT_NO_RESOURCES;
+        }
+
+        if (status == GATT_NO_RESOURCES)
+            gatt_clcb_dealloc(p_clcb);
+    }
+    else
+    {
+        status = GATT_NO_RESOURCES;
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         GATTC_ExecuteWrite
+**
+** Description      This function is called to send an Execute write request to
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  is_execute - to execute or cancel the prepare write requet(s)
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_ExecuteWrite (UINT16 conn_id, BOOLEAN is_execute)
+{
+    tGATT_STATUS status = GATT_SUCCESS;
+    tGATT_CLCB      *p_clcb;
+    tGATT_EXEC_FLAG flag;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+    GATT_TRACE_API2 ("GATTC_ExecuteWrite conn_id=%d is_execute=%d", conn_id, is_execute);
+
+    if ( (p_tcb == NULL) || (p_reg==NULL) )
+    {
+        GATT_TRACE_ERROR1("GATTC_ExecuteWrite Illegal param: conn_id %d", conn_id);
+        return GATT_ILLEGAL_PARAMETER;
+    }
+
+    if (gatt_is_clcb_allocated(conn_id))
+    {
+        GATT_TRACE_ERROR1("GATTC_Write GATT_BUSY conn_id = %d", conn_id);
+        return GATT_BUSY;
+    }
+
+    if ((p_clcb = gatt_clcb_alloc(conn_id)) != NULL)
+    {
+        p_clcb->operation  = GATTC_OPTYPE_EXE_WRITE;
+        flag = is_execute ? GATT_PREP_WRITE_EXEC : GATT_PREP_WRITE_CANCEL;
+        gatt_send_queue_write_cancel (p_clcb->p_tcb, p_clcb, flag);
+    }
+    else
+    {
+        GATT_TRACE_ERROR1("Unable to allocate client CB for conn_id %d ", conn_id);
+        status = GATT_NO_RESOURCES;
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         GATTC_SendHandleValueConfirm
+**
+** Description      This function is called to send a handle value confirmation
+**                  as response to a handle value notification from server.
+**
+** Parameters       conn_id: connection identifier.
+**                  handle: the handle of the attribute confirmation.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+tGATT_STATUS GATTC_SendHandleValueConfirm (UINT16 conn_id, UINT16 handle)
+{
+    tGATT_STATUS    ret = GATT_ILLEGAL_PARAMETER;
+    tGATT_TCB     *p_tcb=gatt_get_tcb_by_idx(GATT_GET_TCB_IDX(conn_id));
+
+    GATT_TRACE_API2 ("GATTC_SendHandleValueConfirm conn_id=%d handle=0x%x", conn_id, handle);
+
+    if (p_tcb)
+    {
+        if (p_tcb->ind_count > 0 )
+        {
+            btu_stop_timer (&p_tcb->ind_ack_timer_ent);
+
+            GATT_TRACE_DEBUG1 ("notif_count=%d ", p_tcb->ind_count);
+            /* send confirmation now */
+            ret = attp_send_cl_msg(p_tcb, 0, GATT_HANDLE_VALUE_CONF, (tGATT_CL_MSG *)&handle);
+
+            p_tcb->ind_count = 0;
+
+        }
+        else
+        {
+            GATT_TRACE_DEBUG1 ("GATTC_SendHandleValueConfirm - conn_id: %u - ignored not waiting for indicaiton ack", conn_id);
+            ret = GATT_SUCCESS;
+        }
+    }
+    else
+    {
+        GATT_TRACE_ERROR1 ("GATTC_SendHandleValueConfirm - Unknown conn_id: %u", conn_id);
+    }
+    return ret;
+}
+
+
+/*******************************************************************************/
+/*                                                                             */
+/*                   GATT  APIs                                                */
+/*                                                                             */
+/*******************************************************************************/
+/*******************************************************************************
+**
+** Function         GATT_SetIdleTimeout
+**
+** Description      This function (common to both client and server) sets the idle
+**                  timeout for a tansport connection
+**
+** Parameter        bd_addr:   target device bd address.
+**                  idle_tout: timeout value in seconds.
+**
+** Returns          void
+**
+*******************************************************************************/
+void GATT_SetIdleTimeout (BD_ADDR bd_addr, UINT16 idle_tout)
+{
+    tGATT_TCB       *p_tcb;
+    BOOLEAN         status = FALSE;
+
+    if ((p_tcb = gatt_find_tcb_by_addr (bd_addr)) != NULL)
+    {
+        if (p_tcb->att_lcid == L2CAP_ATT_CID)
+        {
+            status = L2CA_SetFixedChannelTout (bd_addr, L2CAP_ATT_CID, idle_tout);
+        }
+        else
+        {
+            status = L2CA_SetIdleTimeout (p_tcb->att_lcid, idle_tout, FALSE);
+        }
+    }
+
+    GATT_TRACE_API2 ("GATT_SetIdleTimeout idle_tout=%d status=%d(1-OK 0-not performed)",
+                    idle_tout, status);
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_Register
+**
+** Description      This function is called to register an  application
+**                  with GATT
+**
+** Parameter        p_app_uuid128: Application UUID
+**                  p_cb_info: callback functions.
+**
+** Returns          0 for error, otherwise the index of the client registered with GATT
+**
+*******************************************************************************/
+tGATT_IF GATT_Register (tBT_UUID *p_app_uuid128, tGATT_CBACK *p_cb_info)
+{
+    tGATT_REG    *p_reg;
+    UINT8        i_gatt_if=0;
+    tGATT_IF     gatt_if=0;
+
+    GATT_TRACE_API0 ("GATT_Register");
+    gatt_dbg_display_uuid(*p_app_uuid128);
+
+    for (i_gatt_if = 0, p_reg = gatt_cb.cl_rcb; i_gatt_if < GATT_MAX_APPS; i_gatt_if++, p_reg++)
+    {
+        if (p_reg->in_use  && !memcmp(p_app_uuid128->uu.uuid128, p_reg->app_uuid128.uu.uuid128, LEN_UUID_128))
+        {
+            GATT_TRACE_ERROR0("application already registered.");
+            return 0;
+        }
+    }
+
+    for (i_gatt_if = 0, p_reg = gatt_cb.cl_rcb; i_gatt_if < GATT_MAX_APPS; i_gatt_if++, p_reg++)
+    {
+        if (!p_reg->in_use)
+        {
+            memset(p_reg, 0 , sizeof(tGATT_REG));
+            i_gatt_if++;              /* one based number */
+            p_reg->app_uuid128 =  *p_app_uuid128;
+            gatt_if            =
+            p_reg->gatt_if     = (tGATT_IF)i_gatt_if;
+            p_reg->app_cb      = *p_cb_info;
+            p_reg->in_use      = TRUE;
+
+            break;
+        }
+    }
+    GATT_TRACE_API1 ("allocated gatt_if=%d", gatt_if);
+    return gatt_if;
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_Deregister
+**
+** Description      This function deregistered the application from GATT.
+**
+** Parameters       gatt_if: applicaiton interface.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void GATT_Deregister (tGATT_IF gatt_if)
+{
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tGATT_TCB       *p_tcb;
+    tGATT_CLCB       *p_clcb;
+    UINT8           i, ii, j;
+    tGATT_SR_REG    *p_sreg;
+
+    GATT_TRACE_API1 ("GATT_Deregister gatt_if=%d", gatt_if);
+    /* Index 0 is GAP and is never deregistered */
+    if ( (gatt_if == 0) || (p_reg == NULL) )
+    {
+        GATT_TRACE_ERROR1 ("GATT_Deregister with invalid gatt_if: %u", gatt_if);
+        return;
+    }
+
+    /* stop all services  */
+    /* todo an applcaiton can not be deregistered if its services is also used by other application
+      deregisteration need to bed performed in an orderly fashion
+      no check for now */
+
+    for (ii = 0, p_sreg = gatt_cb.sr_reg; ii < GATT_MAX_SR_PROFILES; ii++, p_sreg++)
+    {
+        if (p_sreg->in_use && (p_sreg->gatt_if == gatt_if))
+        {
+            GATTS_StopService(p_sreg->s_hdl);
+        }
+    }
+
+    /* free all services db buffers if owned by this application */
+    gatt_free_srvc_db_buffer_app_id(&p_reg->app_uuid128);
+
+    /* When an application deregisters, check remove the link associated with the app */
+
+    for (i=0, p_tcb = gatt_cb.tcb; i < GATT_MAX_PHY_CHANNEL; i++, p_tcb++)
+    {
+        if (p_tcb->in_use)
+        {
+            if (gatt_get_ch_state(p_tcb) != GATT_CH_CLOSE)
+            {
+                gatt_update_app_use_link_flag(gatt_if, p_tcb,  FALSE, FALSE);
+                if (!gatt_num_apps_hold_link(p_tcb))
+                {
+                    /* this will disconnect the link or cancel the pending connect request at lower layer*/
+                    gatt_disconnect(p_tcb->peer_bda);
+                }
+            }
+
+            for (j = 0, p_clcb= &gatt_cb.clcb[j]; j < GATT_CL_MAX_LCB; j++, p_clcb++)
+            {
+                if (p_clcb->in_use &&
+                    (p_clcb->p_reg->gatt_if == gatt_if) &&
+                    (p_clcb->p_tcb->tcb_idx == p_tcb->tcb_idx))
+                {
+                    gatt_clcb_dealloc (p_clcb);
+                    break;
+                }
+            }
+        }
+    }
+
+    gatt_deregister_bgdev_list(gatt_if);
+    memset (p_reg, 0, sizeof(tGATT_REG));
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_StartIf
+**
+** Description      This function is called after registration to start receiving
+**                  callbacks for registered interface.  Function may call back
+**                  with connection status and queued notifications
+**
+** Parameter        gatt_if: applicaiton interface.
+**
+** Returns          0 for error, otherwise the index of the client registered with GATT
+**
+*******************************************************************************/
+void GATT_StartIf (tGATT_IF gatt_if)
+{
+    tGATT_REG   *p_reg;
+    tGATT_TCB   *p_tcb;
+    //tGATT_CLCB   *p_clcb;
+    BD_ADDR     bda;
+    UINT8       start_idx, found_idx;
+    UINT16      conn_id;
+
+    GATT_TRACE_API1 ("GATT_StartIf gatt_if=%d", gatt_if);
+    if ((p_reg = gatt_get_regcb(gatt_if)) != NULL)
+    {
+        p_reg = &gatt_cb.cl_rcb[gatt_if - 1];
+        start_idx = 0;
+        while (gatt_find_the_connected_bda(start_idx, bda, &found_idx))
+        {
+            p_tcb = gatt_find_tcb_by_addr(bda);
+            if (p_reg->app_cb.p_conn_cb)
+            {
+                conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, gatt_if);
+                (*p_reg->app_cb.p_conn_cb)(gatt_if, bda, conn_id, TRUE, 0);
+            }
+            start_idx = ++found_idx;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_Connect
+**
+** Description      This function initiate a connecttion to a ATT server.
+**
+** Parameters       gatt_if: applicaiton interface
+**                  bd_addr: peer device address.
+**                  is_direct: is a direct conenection or a background auto connection
+**
+** Returns          TRUE if connection started; FALSE if connection start failure.
+**
+*******************************************************************************/
+BOOLEAN GATT_Connect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct){
+    tGATT_REG    *p_reg;
+    BOOLEAN status;
+
+    GATT_TRACE_API1 ("GATT_Connect gatt_if=%d", gatt_if);
+
+    /* Make sure app is registered */
+    if ((p_reg = gatt_get_regcb(gatt_if)) == NULL)
+    {
+        GATT_TRACE_ERROR1("GATT_Connect - gatt_if =%d is not registered", gatt_if);
+        return(FALSE);
+    }
+
+    if (is_direct)
+        status = gatt_act_connect (p_reg, bd_addr);
+    else
+        status = gatt_update_auto_connect_dev(gatt_if,TRUE, bd_addr);
+
+    return status;
+
+}
+
+/*******************************************************************************
+**
+** Function         GATT_CancelConnect
+**
+** Description      This function initiate a connecttion to a ATT server.
+**
+** Parameters       gatt_if: client interface. If 0 used as unconditionally disconnect,
+**                          typically used for direct connection cancellation.
+**                  bd_addr: peer device address.
+**
+** Returns          TRUE if connection started; FALSE if connection start failure.
+**
+*******************************************************************************/
+BOOLEAN GATT_CancelConnect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct){
+    tGATT_REG     *p_reg;
+    tGATT_TCB     *p_tcb;
+    BOOLEAN       status = TRUE;
+    tGATT_IF      temp_gatt_if;
+    UINT8         start_idx, found_idx;
+
+    GATT_TRACE_API1 ("GATT_CancelConnect gatt_if=%d", gatt_if);
+
+    if ((gatt_if != 0) && ((p_reg = gatt_get_regcb(gatt_if)) == NULL))
+    {
+        GATT_TRACE_ERROR1("GATT_CancelConnect - gatt_if =%d is not registered", gatt_if);
+        return(FALSE);
+    }
+
+    if (is_direct)
+    {
+        if (!gatt_if)
+        {
+            GATT_TRACE_DEBUG0("GATT_CancelConnect - unconditional");
+            start_idx = 0;
+            p_tcb = gatt_find_tcb_by_addr(bd_addr);
+            if (p_tcb && gatt_num_apps_hold_link(p_tcb))
+            {
+                while (status && gatt_find_app_hold_link(p_tcb, start_idx, &found_idx, &temp_gatt_if))
+                {
+                    status = gatt_cancel_open(temp_gatt_if, bd_addr);
+                    start_idx = ++found_idx;
+                }
+            }
+            else
+            {
+                GATT_TRACE_ERROR0("GATT_CancelConnect - no app found");
+                status = FALSE;
+            }
+        }
+        else
+        {
+            status = gatt_cancel_open(gatt_if, bd_addr);
+        }
+    }
+    else
+    {
+        if (!gatt_if)
+        {
+            if (gatt_get_num_apps_for_bg_dev(bd_addr))
+            {
+                while (gatt_find_app_for_bg_dev(bd_addr, &temp_gatt_if))
+                    gatt_remove_bg_dev_for_app(temp_gatt_if, bd_addr);
+            }
+            else
+            {
+                GATT_TRACE_ERROR0("GATT_CancelConnect -no app associated with the bg device for unconditional removal");
+                status = FALSE;
+            }
+        }
+        else
+        {
+            status = gatt_remove_bg_dev_for_app(gatt_if, bd_addr);
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         GATT_Disconnect
+**
+** Description      This function disconnect a logic channel.
+**
+** Parameters       conn_id: connection identifier.
+**
+** Returns          GATT_SUCCESS if disconnected.
+**
+*******************************************************************************/
+tGATT_STATUS GATT_Disconnect (UINT16 conn_id)
+{
+    tGATT_STATUS    ret = GATT_ILLEGAL_PARAMETER;
+    tGATT_TCB       *p_tcb=NULL;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8          tcb_idx = GATT_GET_TCB_IDX(conn_id);
+
+    GATT_TRACE_API1 ("GATT_Disconnect conn_id=%d ", conn_id);
+
+    p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+
+    if (p_tcb)
+    {
+        gatt_update_app_use_link_flag(gatt_if, p_tcb, FALSE, FALSE);
+        if (!gatt_num_apps_hold_link(p_tcb))
+        {
+            gatt_disconnect(p_tcb->peer_bda);
+        }
+        ret = GATT_SUCCESS;
+    }
+    return ret;
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_GetConnectionInfor
+**
+** Description      This function use conn_id to find its associated BD address and applciation
+**                  interface
+**
+** Parameters        conn_id: connection id  (input)
+**                   p_gatt_if: applicaiton interface (output)
+**                   bd_addr: peer device address. (output)
+**
+** Returns          TRUE the ligical link information is found for conn_id
+**
+*******************************************************************************/
+BOOLEAN GATT_GetConnectionInfor(UINT16 conn_id, tGATT_IF *p_gatt_if, BD_ADDR bd_addr)
+{
+
+    tGATT_IF        gatt_if = GATT_GET_GATT_IF(conn_id);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb= gatt_get_tcb_by_idx(tcb_idx);
+    BOOLEAN         status=FALSE;
+
+    GATT_TRACE_API1 ("GATT_GetConnectionInfor conn_id=%d", conn_id);
+
+    if (p_tcb && p_reg )
+    {
+        memcpy(bd_addr, p_tcb->peer_bda, BD_ADDR_LEN);
+        *p_gatt_if = gatt_if;
+        status = TRUE;
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         GATT_GetConnIdIfConnected
+**
+** Description      This function find the conn_id if the logical link for BD address
+**                  and applciation interface is connected
+**
+** Parameters        gatt_if: applicaiton interface (input)
+**                   bd_addr: peer device address. (input)
+**                   p_conn_id: connection id  (output)
+**
+** Returns          TRUE the ligical link is connected
+**
+*******************************************************************************/
+BOOLEAN GATT_GetConnIdIfConnected(tGATT_IF gatt_if, BD_ADDR bd_addr, UINT16 *p_conn_id)
+{
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+    tGATT_TCB       *p_tcb= gatt_find_tcb_by_addr(bd_addr);
+    BOOLEAN         status=FALSE;
+
+    if (p_reg && p_tcb && (gatt_get_ch_state(p_tcb) == GATT_CH_OPEN) )
+    {
+        *p_conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, gatt_if);
+        status = TRUE;
+    }
+
+    GATT_TRACE_API1 ("GATT_GetConnIdIfConnected status=%d", status);
+    return status;
+}
+
+#endif
+
+
diff --git a/stack/gatt/gatt_attr.c b/stack/gatt/gatt_attr.c
new file mode 100644
index 0000000..b7ec2fc
--- /dev/null
+++ b/stack/gatt/gatt_attr.c
@@ -0,0 +1,278 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main GATT server attributes access request
+ *  handling functions.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#include "gatt_api.h"
+#include "gatt_int.h"
+
+#if BLE_INCLUDED == TRUE
+
+#define GATTP_MAX_NUM_INC_SVR       0
+#define GATTP_MAX_CHAR_NUM          2
+#define GATTP_MAX_ATTR_NUM          (GATTP_MAX_CHAR_NUM * 2 + GATTP_MAX_NUM_INC_SVR + 1)
+#define GATTP_MAX_CHAR_VALUE_SIZE   50
+
+#ifndef GATTP_ATTR_DB_SIZE
+#define GATTP_ATTR_DB_SIZE      GATT_DB_MEM_SIZE(GATTP_MAX_NUM_INC_SVR, GATTP_MAX_CHAR_NUM, GATTP_MAX_CHAR_VALUE_SIZE)
+#endif
+
+static void gatt_profile_request_cback (UINT16 conn_id, UINT32 trans_id, UINT8 op_code, tGATTS_DATA *p_data);
+static void gatt_profile_connect_cback (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id, BOOLEAN connected, tGATT_DISCONN_REASON reason);
+
+static tGATT_CBACK gatt_profile_cback =
+{
+    gatt_profile_connect_cback,
+    NULL,
+    NULL,
+    NULL,
+    gatt_profile_request_cback
+} ;
+
+/*******************************************************************************
+**
+** Function         gatt_profile_find_conn_id_by_bd_addr
+**
+** Description      The function searches all LCB with macthing bd address
+**
+** Returns          total number of clcb found.
+**
+*******************************************************************************/
+UINT16 gatt_profile_find_conn_id_by_bd_addr(BD_ADDR bda)
+{
+    UINT8 i_clcb;
+    tGATT_PROFILE_CLCB    *p_clcb = NULL;
+
+    for (i_clcb = 0, p_clcb= gatt_cb.profile_clcb; i_clcb < GATT_MAX_APPS; i_clcb++, p_clcb++)
+    {
+        if (p_clcb->in_use && p_clcb->connected && !memcmp(p_clcb->bda, bda, BD_ADDR_LEN))
+        {
+            return p_clcb->conn_id;
+        }
+    }
+
+    return GATT_INVALID_CONN_ID;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_profile_find_clcb_by_bd_addr
+**
+** Description      The function searches all LCBs with macthing bd address.
+**
+** Returns          Pointer to the found link conenction control block.
+**
+*******************************************************************************/
+tGATT_PROFILE_CLCB *gatt_profile_find_clcb_by_bd_addr(BD_ADDR bda)
+{
+    UINT8 i_clcb;
+    tGATT_PROFILE_CLCB    *p_clcb = NULL;
+
+    for (i_clcb = 0, p_clcb= gatt_cb.profile_clcb; i_clcb < GATT_MAX_APPS; i_clcb++, p_clcb++)
+    {
+        if (p_clcb->in_use && p_clcb->connected && !memcmp(p_clcb->bda, bda, BD_ADDR_LEN))
+        {
+            return p_clcb;
+        }
+    }
+
+    return p_clcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_profile_clcb_alloc
+**
+** Description      The function allocates a GATT profile  connection link control block
+**
+** Returns           NULL if not found. Otherwise pointer to the connection link block.
+**
+*******************************************************************************/
+tGATT_PROFILE_CLCB *gatt_profile_clcb_alloc (UINT16 conn_id, BD_ADDR bda)
+{
+    UINT8                   i_clcb = 0;
+    tGATT_PROFILE_CLCB      *p_clcb = NULL;
+
+    for (i_clcb = 0, p_clcb= gatt_cb.profile_clcb; i_clcb < GATT_MAX_APPS; i_clcb++, p_clcb++)
+    {
+        if (!p_clcb->in_use)
+        {
+            p_clcb->in_use      = TRUE;
+            p_clcb->conn_id     = conn_id;
+            p_clcb->connected   = TRUE;
+            memcpy (p_clcb->bda, bda, BD_ADDR_LEN);
+            break;
+        }
+    }
+    return p_clcb;
+}
+/*******************************************************************************
+**
+** Function         gatt_profile_clcb_dealloc
+**
+** Description      The function deallocates a GATT profile  connection link control block
+**
+** Returns           NTrue the deallocation is successful
+**
+*******************************************************************************/
+BOOLEAN gatt_profile_clcb_dealloc (UINT16 conn_id)
+{
+    UINT8                   i_clcb = 0;
+    tGATT_PROFILE_CLCB      *p_clcb = NULL;
+
+    for (i_clcb = 0, p_clcb= gatt_cb.profile_clcb; i_clcb < GATT_MAX_APPS; i_clcb++, p_clcb++)
+    {
+        if (p_clcb->in_use && p_clcb->connected && (p_clcb->conn_id == conn_id))
+        {
+            memset(p_clcb, 0, sizeof(tGATT_PROFILE_CLCB));
+            return TRUE;
+        }
+    }
+    return FALSE;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_profile_request_cback
+**
+** Description      GATT profile attribute access request callback.
+**
+** Returns          void.
+**
+*******************************************************************************/
+static void gatt_profile_request_cback (UINT16 conn_id, UINT32 trans_id, tGATTS_REQ_TYPE type,
+                                        tGATTS_DATA *p_data)
+{
+    UINT8       status = GATT_INVALID_PDU;
+    tGATTS_RSP   rsp_msg ;
+    BOOLEAN     ignore = FALSE;
+
+    memset(&rsp_msg, 0, sizeof(tGATTS_RSP));
+
+    switch (type)
+    {
+        case GATTS_REQ_TYPE_READ:
+            status = GATT_READ_NOT_PERMIT;
+            break;
+
+        case GATTS_REQ_TYPE_WRITE:
+            status = GATT_WRITE_NOT_PERMIT;
+            break;
+
+        case GATTS_REQ_TYPE_WRITE_EXEC:
+            //case GATT_CMD_WRITE:
+            ignore = TRUE;
+            GATT_TRACE_EVENT0("Ignore GATT_REQ_EXEC_WRITE/WRITE_CMD" );
+            break;
+
+        case GATTS_REQ_TYPE_MTU:
+            GATT_TRACE_EVENT1("Get MTU exchange new mtu size: %d", p_data->mtu);
+            ignore = TRUE;
+            break;
+
+        default:
+            GATT_TRACE_EVENT1("Unknown/unexpected LE GAP ATT request: 0x%02x", type);
+            break;
+    }
+
+    if (!ignore)
+        GATTS_SendRsp (conn_id, trans_id, status, &rsp_msg);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_profile_connect_cback
+**
+** Description      Gatt profile connection callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatt_profile_connect_cback (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id,
+                                        BOOLEAN connected, tGATT_DISCONN_REASON reason)
+{
+    GATT_TRACE_EVENT5 ("gatt_profile_connect_cback: from %08x%04x connected:%d conn_id=%d reason = 0x%04x",
+                       (bda[0]<<24)+(bda[1]<<16)+(bda[2]<<8)+bda[3],
+                       (bda[4]<<8)+bda[5], connected, conn_id, reason);
+
+    if (connected)
+    {
+        if (gatt_profile_clcb_alloc(conn_id, bda) == NULL)
+        {
+            GATT_TRACE_ERROR0 ("gatt_profile_connect_cback: no_resource");
+            return;
+        }
+    }
+    else
+    {
+        gatt_profile_clcb_dealloc(conn_id);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_profile_db_init
+**
+** Description      Initializa the GATT profile attribute database.
+**
+*******************************************************************************/
+void gatt_profile_db_init (void)
+{
+    tBT_UUID          app_uuid = {LEN_UUID_128, {0}};
+    tBT_UUID          uuid = {LEN_UUID_16, {UUID_SERVCLASS_GATT_SERVER}};
+    UINT16            service_handle = 0;
+    tGATT_STATUS      status;
+
+    /* Fill our internal UUID with a fixed pattern 0x81 */
+    memset (&app_uuid.uu.uuid128, 0x81, LEN_UUID_128);
+
+
+    /* Create a GATT profile service */
+    gatt_cb.gatt_if = GATT_Register(&app_uuid, &gatt_profile_cback);
+    GATT_StartIf(gatt_cb.gatt_if);
+
+    service_handle = GATTS_CreateService (gatt_cb.gatt_if , &uuid, 0, GATTP_MAX_ATTR_NUM, TRUE);
+    /* add Service Changed characteristic
+    */
+    uuid.uu.uuid16 = gatt_cb.gattp_attr.uuid = GATT_UUID_GATT_SRV_CHGD;
+    gatt_cb.gattp_attr.service_change = 0;
+    gatt_cb.gattp_attr.handle   =
+    gatt_cb.handle_of_h_r       = GATTS_AddCharacteristic(service_handle, &uuid, 0, GATT_CHAR_PROP_BIT_INDICATE);
+
+    GATT_TRACE_DEBUG1 ("gatt_profile_db_init:  handle of service changed%d",
+                       gatt_cb.handle_of_h_r  );
+
+    /* start service
+    */
+    status = GATTS_StartService (gatt_cb.gatt_if, service_handle, GATT_TRANSPORT_LE_BR_EDR);
+
+    GATT_TRACE_DEBUG2 ("gatt_profile_db_init:  gatt_if=%d   start status%d",
+                       gatt_cb.gatt_if,  status);
+}
+
+#endif  /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_auth.c b/stack/gatt/gatt_auth.c
new file mode 100644
index 0000000..de0c14f
--- /dev/null
+++ b/stack/gatt/gatt_auth.c
@@ -0,0 +1,448 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains GATT authentication handling functions
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+#include <string.h>
+#include "gki.h"
+
+#include "gatt_int.h"
+#include "gatt_api.h"
+#include "btm_int.h"
+
+/*******************************************************************************
+**
+** Function         gatt_sign_data
+**
+** Description      This function sign the data for write command.
+**
+** Returns          TRUE if encrypted, otherwise FALSE.
+**
+*******************************************************************************/
+static BOOLEAN gatt_sign_data (tGATT_CLCB *p_clcb)
+{
+    tGATT_VALUE         *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf;
+    UINT8               *p_data = NULL, *p;
+    UINT16              payload_size = p_clcb->p_tcb->payload_size;
+    BOOLEAN             status = FALSE;
+    UINT8                *p_signature;
+
+    p_data = (UINT8 *)GKI_getbuf((UINT16)(p_attr->len + 3)); /* 3 = 2 byte handle + opcode */
+
+    if (p_data != NULL)
+    {
+        p = p_data;
+        UINT8_TO_STREAM(p, GATT_SIGN_CMD_WRITE);
+        UINT16_TO_STREAM(p, p_attr->handle);
+        ARRAY_TO_STREAM(p, p_attr->value, p_attr->len);
+
+        /* sign data length should be attribulte value length plus 2B handle + 1B op code */
+        if ((payload_size - GATT_AUTH_SIGN_LEN - 3) < p_attr->len)
+            p_attr->len = payload_size - GATT_AUTH_SIGN_LEN - 3;
+
+        p_signature = p_attr->value + p_attr->len;
+        if (BTM_BleDataSignature(p_clcb->p_tcb->peer_bda,
+                                p_data,
+                                (UINT16)(p_attr->len + 3), /* 3 = 2 byte handle + opcode */
+                                p_signature))
+        {
+            p_attr->len += BTM_BLE_AUTH_SIGN_LEN;
+            gatt_set_ch_state(p_clcb->p_tcb, GATT_CH_OPEN);
+            gatt_act_write(p_clcb);
+        }
+        else
+        {
+            gatt_end_operation(p_clcb, GATT_INTERNAL_ERROR, NULL);
+        }
+
+        GKI_freebuf(p_data);
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_verify_signature
+**
+** Description      This function start to verify the sign data when receiving
+**                  the data from peer device.
+**
+** Returns
+**
+*******************************************************************************/
+void gatt_verify_signature(tGATT_TCB *p_tcb, BT_HDR *p_buf)
+{
+    UINT16  cmd_len;
+    UINT8   op_code;
+    UINT8   *p, *p_orig = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    UINT32  counter;
+
+    cmd_len = p_buf->len - GATT_AUTH_SIGN_LEN + 4;
+    p =  p_orig + cmd_len - 4;
+    STREAM_TO_UINT32(counter, p);
+
+    if (BTM_BleVerifySignature(p_tcb->peer_bda, p_orig, cmd_len, counter, p))
+    {
+        STREAM_TO_UINT8(op_code, p_orig);
+        gatt_server_handle_client_req (p_tcb, op_code, (UINT16)(p_buf->len - 1), p_orig);
+    }
+    else
+    {
+        /* if this is a bad signature, assume from attacker, ignore it */
+        GATT_TRACE_ERROR0("Signature Verification Failed");
+        gatt_disconnect(p_tcb->peer_bda);
+    }
+
+    return;
+}
+/*******************************************************************************
+**
+** Function         gatt_sec_check_complete
+**
+** Description      security check complete and proceed to data sending action.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_sec_check_complete(BOOLEAN sec_check_ok, tGATT_CLCB   *p_clcb)
+{
+    p_clcb->p_tcb->p_clcb = NULL;
+    gatt_set_sec_act(p_clcb->p_tcb, GATT_SEC_NONE);
+
+    if (!sec_check_ok)
+    {
+        gatt_end_operation(p_clcb, GATT_AUTH_FAIL, NULL);
+    }
+    else if (p_clcb->operation == GATTC_OPTYPE_WRITE)
+    {
+        gatt_act_write(p_clcb);
+    }
+    else if (p_clcb->operation == GATTC_OPTYPE_READ)
+    {
+        gatt_act_read(p_clcb, p_clcb->counter);
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_enc_cmpl_cback
+**
+** Description      link encryption complete callback.
+**
+** Returns
+**
+*******************************************************************************/
+void gatt_enc_cmpl_cback(BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result)
+{
+    tGATT_TCB   *p_tcb;
+    UINT8       sec_flag;
+    BOOLEAN     status = FALSE;
+
+    GATT_TRACE_DEBUG0("gatt_enc_cmpl_cback");
+    if ((p_tcb = gatt_find_tcb_by_addr(bd_addr)) != NULL)
+    {
+        gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+
+        if (result == BTM_SUCCESS)
+        {
+            if (gatt_get_sec_act(p_tcb) == GATT_SEC_ENCRYPT_MITM )
+            {
+                BTM_GetSecurityFlags(bd_addr, &sec_flag);
+                if (sec_flag & sec_flag & BTM_SEC_FLAG_LKEY_AUTHED)
+                {
+                    status = TRUE;
+                }
+            }
+            else
+            {
+                status = TRUE;
+            }
+        }
+        gatt_sec_check_complete(status , (tGATT_CLCB   *)p_tcb->p_clcb);
+    }
+    else
+    {
+        GATT_TRACE_ERROR0("enc callback for unknown bd_addr");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_set_sec_act
+**
+** Description      This function set the sec_act in clcb
+**
+** Returns          none
+**
+*******************************************************************************/
+void gatt_set_sec_act(tGATT_TCB *p_tcb, tGATT_SEC_ACTION sec_act)
+{
+    if (p_tcb)
+    {
+        p_tcb->sec_act = sec_act;
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_get_sec_act
+**
+** Description      This function get the sec_act in clcb
+**
+** Returns          none
+**
+*******************************************************************************/
+tGATT_SEC_ACTION gatt_get_sec_act(tGATT_TCB *p_tcb)
+{
+    tGATT_SEC_ACTION sec_act = GATT_SEC_NONE;
+    if (p_tcb)
+    {
+        sec_act = p_tcb->sec_act;
+    }
+    return sec_act;
+}
+/*******************************************************************************
+**
+** Function         gatt_determine_sec_act
+**
+** Description      This routine determine the security action based on auth_request and
+**                  current link status
+**
+** Returns          tGATT_SEC_ACTION security action
+**
+*******************************************************************************/
+tGATT_SEC_ACTION gatt_determine_sec_act(tGATT_CLCB *p_clcb )
+{
+    tGATT_SEC_ACTION    act = GATT_SEC_OK;
+    UINT8               sec_flag;
+    tGATT_TCB           *p_tcb = p_clcb->p_tcb;
+    tGATT_AUTH_REQ      auth_req = p_clcb->auth_req;
+
+    BOOLEAN             is_link_encrypted= FALSE;
+    BOOLEAN             is_le_link=FALSE;
+    BOOLEAN             is_link_key_known=FALSE;
+    BOOLEAN             is_key_mitm=FALSE;
+    UINT8               key_type;
+
+    if (auth_req == GATT_AUTH_REQ_NONE )
+        return act;
+
+    is_le_link = btm_ble_check_link_type(p_tcb->peer_bda);
+    BTM_GetSecurityFlags(p_tcb->peer_bda, &sec_flag);
+
+    if (sec_flag & BTM_SEC_FLAG_ENCRYPTED)
+    {
+        is_link_encrypted = TRUE;
+    }
+    if (sec_flag & BTM_SEC_FLAG_LKEY_KNOWN)
+    {
+        is_link_key_known = TRUE;
+        if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED)
+        {
+            is_key_mitm = TRUE;
+        }
+    }
+
+    /* first check link key upgrade required or not */
+    switch (auth_req)
+    {
+        case GATT_AUTH_REQ_MITM:
+        case GATT_AUTH_REQ_SIGNED_MITM:
+            if (!is_key_mitm)
+                act = GATT_SEC_ENCRYPT_MITM;
+            break;
+
+        case GATT_AUTH_REQ_NO_MITM:
+        case GATT_AUTH_REQ_SIGNED_NO_MITM:
+            if (!is_link_key_known)
+                act = GATT_SEC_ENCRYPT_NO_MITM;
+            break;
+        default:
+            break;
+    }
+
+    /* now check link needs to be encrypted or not if the link key upgrade is not required */
+    if (act == GATT_SEC_OK)
+    {
+        if (is_le_link &&
+            (p_clcb->operation == GATTC_OPTYPE_WRITE) &&
+            (p_clcb->op_subtype == GATT_WRITE_NO_RSP))
+        {
+            /* this is a write command request
+               check data signing required or not */
+            if (!is_link_encrypted)
+            {
+                btm_ble_get_enc_key_type(p_tcb->peer_bda, &key_type);
+
+                if ( (key_type & BTM_LE_KEY_LCSRK) &&
+                     ((auth_req == GATT_AUTH_REQ_SIGNED_NO_MITM) ||
+                      (auth_req == GATT_AUTH_REQ_SIGNED_MITM)))
+                {
+                    act = GATT_SEC_SIGN_DATA;
+                }
+                else
+                {
+                    act = GATT_SEC_ENCRYPT;
+                }
+            }
+        }
+        else
+        {
+            if (!is_link_encrypted)
+            {
+                act = GATT_SEC_ENCRYPT;
+            }
+        }
+
+    }
+
+    return  act ;
+
+}
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_get_link_encrypt_status
+**
+** Description      This routine get the encryption status of the specified link
+**
+**
+** Returns          tGATT_STATUS link encryption status
+**
+*******************************************************************************/
+tGATT_STATUS gatt_get_link_encrypt_status(tGATT_TCB *p_tcb)
+{
+    tGATT_STATUS    encrypt_status = GATT_NOT_ENCRYPTED;
+    UINT8           sec_flag=0;
+
+    BTM_GetSecurityFlags(p_tcb->peer_bda, &sec_flag);
+
+    if ((sec_flag & BTM_SEC_FLAG_ENCRYPTED) && (sec_flag & BTM_SEC_FLAG_LKEY_KNOWN))
+    {
+        encrypt_status = GATT_ENCRYPED_NO_MITM;
+        if (sec_flag & BTM_SEC_FLAG_LKEY_AUTHED)
+            encrypt_status = GATT_ENCRYPED_MITM;
+    }
+
+    GATT_TRACE_DEBUG1("gatt_get_link_encrypt_status status=0x%x",encrypt_status);
+    return  encrypt_status ;
+}
+
+
+/*******************************************************************************
+**
+** Function          gatt_convert_sec_action
+**
+** Description      Convert GATT security action enum into equivalent BTM BLE security action enum
+**
+** Returns          BOOLEAN TRUE - conversation is successful
+**
+*******************************************************************************/
+static BOOLEAN gatt_convert_sec_action(tGATT_SEC_ACTION gatt_sec_act, tBTM_BLE_SEC_ACT *p_btm_sec_act )
+{
+    BOOLEAN status = TRUE;
+    switch (gatt_sec_act)
+    {
+        case GATT_SEC_ENCRYPT:
+            *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT;
+            break;
+        case GATT_SEC_ENCRYPT_NO_MITM:
+            *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_NO_MITM;
+            break;
+        case GATT_SEC_ENCRYPT_MITM:
+            *p_btm_sec_act = BTM_BLE_SEC_ENCRYPT_MITM;
+            break;
+        default:
+            status = FALSE;
+            break;
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         gatt_check_enc_req
+**
+** Description      check link security.
+**
+** Returns          TRUE if encrypted, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN gatt_security_check_start(tGATT_CLCB *p_clcb)
+{
+    tGATT_TCB           *p_tcb = p_clcb->p_tcb;
+    tGATT_SEC_ACTION    gatt_sec_act;
+    tBTM_BLE_SEC_ACT    btm_ble_sec_act;
+    BOOLEAN             status = TRUE;
+    tBTM_STATUS         btm_status;
+
+    if ( gatt_get_ch_state(p_tcb) == GATT_CH_OPEN)
+    {
+        gatt_sec_act = gatt_determine_sec_act(p_clcb);
+        gatt_set_sec_act(p_tcb, gatt_sec_act);
+        switch (gatt_sec_act )
+        {
+            case GATT_SEC_SIGN_DATA:
+                GATT_TRACE_DEBUG0("gatt_security_check_start: Do data signing");
+                gatt_set_ch_state(p_tcb, GATT_CH_W4_DATA_SIGN_COMP);
+                gatt_sign_data(p_clcb);
+                break;
+            case GATT_SEC_ENCRYPT:
+            case GATT_SEC_ENCRYPT_NO_MITM:
+            case GATT_SEC_ENCRYPT_MITM:
+                GATT_TRACE_DEBUG0("gatt_security_check_start: Encrypt now or key upgreade first");
+                gatt_convert_sec_action(p_tcb->sec_act, &btm_ble_sec_act);
+                gatt_set_ch_state(p_tcb, GATT_CH_W4_SEC_COMP);
+                p_tcb->p_clcb = p_clcb;           /* keep the clcb pointer in CCB */
+                btm_status = BTM_SetEncryption(p_tcb->peer_bda, gatt_enc_cmpl_cback, &btm_ble_sec_act);
+                if ( (btm_status != BTM_SUCCESS) && (btm_status != BTM_CMD_STARTED))
+                {
+                    GATT_TRACE_ERROR1("gatt_security_check_start BTM_SetEncryption failed btm_status=%d", btm_status);
+                    p_tcb->p_clcb  = NULL;
+                    status = FALSE;
+                }
+                break;
+            default:
+                gatt_sec_check_complete(TRUE, p_clcb);
+                break;
+        }
+
+        if (status == FALSE)
+        {
+            gatt_set_sec_act(p_tcb, GATT_SEC_NONE);
+            gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+        }
+    }
+    else
+    {
+        GATT_TRACE_ERROR0("gatt_security_check_start channel not open");
+        status = FALSE;
+    }
+
+    return status;
+}
+
+
+#endif  /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_cl.c b/stack/gatt/gatt_cl.c
new file mode 100644
index 0000000..91fb985
--- /dev/null
+++ b/stack/gatt/gatt_cl.c
@@ -0,0 +1,1220 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main GATT client functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+
+#include <string.h>
+#include "gki.h"
+#include "gatt_int.h"
+
+#define GATT_WRITE_LONG_HDR_SIZE    5 /* 1 opcode + 2 handle + 2 offset */
+#define GATT_READ_CHAR_VALUE_HDL    (GATT_READ_CHAR_VALUE | 0x80)
+#define GATT_READ_INC_SRV_UUID128   (GATT_DISC_INC_SRVC   | 0x90)
+
+/********************************************************************************
+**                       G L O B A L      G A T T       D A T A                 *
+*********************************************************************************/
+void gatt_send_prepare_write(tGATT_TCB  *p_tcb, tGATT_CLCB *p_clcb);
+
+UINT8   disc_type_to_att_opcode[GATT_DISC_MAX] =
+{
+    0,
+    GATT_REQ_READ_BY_GRP_TYPE,     /*  GATT_DISC_SRVC_ALL = 1, */
+    GATT_REQ_FIND_TYPE_VALUE,      /*  GATT_DISC_SRVC_BY_UUID,  */
+    GATT_REQ_READ_BY_TYPE,         /*  GATT_DISC_INC_SRVC,      */
+    GATT_REQ_READ_BY_TYPE,         /*  GATT_DISC_CHAR,          */
+    GATT_REQ_FIND_INFO             /*  GATT_DISC_CHAR_DSCPT,    */
+};
+
+UINT16 disc_type_to_uuid[GATT_DISC_MAX] =
+{
+    0,                  /* reserved */
+    GATT_UUID_PRI_SERVICE, /* <service> DISC_SRVC_ALL */
+    GATT_UUID_PRI_SERVICE, /* <service> for DISC_SERVC_BY_UUID */
+    GATT_UUID_INCLUDE_SERVICE, /* <include_service> for DISC_INC_SRVC */
+    GATT_UUID_CHAR_DECLARE,   /* <characteristic> for DISC_CHAR */
+    0                   /* no type filtering for DISC_CHAR_DSCPT */
+};
+
+
+/*******************************************************************************
+**
+** Function         gatt_act_discovery
+**
+** Description      GATT discovery operation.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_act_discovery(tGATT_CLCB *p_clcb)
+{
+    UINT8       op_code = disc_type_to_att_opcode[p_clcb->op_subtype];
+    tGATT_CL_MSG   cl_req;
+
+    if (p_clcb->s_handle <= p_clcb->e_handle && p_clcb->s_handle != 0)
+    {
+        memset(&cl_req, 0, sizeof(tGATT_CL_MSG));
+
+        cl_req.browse.s_handle = p_clcb->s_handle;
+        cl_req.browse.e_handle = p_clcb->e_handle;
+
+        if (disc_type_to_uuid[p_clcb->op_subtype] != 0)
+        {
+            cl_req.browse.uuid.len = 2;
+            cl_req.browse.uuid.uu.uuid16 = disc_type_to_uuid[p_clcb->op_subtype];
+        }
+
+        if (p_clcb->op_subtype == GATT_DISC_SRVC_BY_UUID) /* fill in the FindByTypeValue request info*/
+        {
+            cl_req.find_type_value.uuid.len = 2;
+            cl_req.find_type_value.uuid.uu.uuid16 = disc_type_to_uuid[p_clcb->op_subtype];
+            cl_req.find_type_value.s_handle = p_clcb->s_handle;
+            cl_req.find_type_value.e_handle = p_clcb->e_handle;
+            cl_req.find_type_value.value_len = p_clcb->uuid.len;
+            memcpy (cl_req.find_type_value.value,  &p_clcb->uuid.uu, p_clcb->uuid.len);
+        }
+
+        if (attp_send_cl_msg(p_clcb->p_tcb, p_clcb->clcb_idx, op_code, &cl_req) !=  GATT_SUCCESS)
+        {
+            gatt_end_operation(p_clcb, GATT_ERROR, NULL);
+        }
+    }
+    else /* end of handle range */
+        gatt_end_operation(p_clcb, GATT_SUCCESS, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_act_read
+**
+** Description      GATT read operation.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_act_read (tGATT_CLCB *p_clcb, UINT16 offset)
+{
+    tGATT_TCB  *p_tcb = p_clcb->p_tcb;
+    UINT8   rt = GATT_INTERNAL_ERROR;
+    tGATT_CL_MSG  msg;
+    UINT8        op_code = 0;
+
+    memset (&msg, 0, sizeof(tGATT_CL_MSG));
+
+    switch (p_clcb->op_subtype)
+    {
+        case GATT_READ_CHAR_VALUE:
+        case GATT_READ_BY_TYPE:
+            op_code = GATT_REQ_READ_BY_TYPE;
+            msg.browse.s_handle = p_clcb->s_handle;
+            msg.browse.e_handle = p_clcb->e_handle;
+            if (p_clcb->op_subtype == GATT_READ_BY_TYPE)
+                memcpy(&msg.browse.uuid, &p_clcb->uuid, sizeof(tBT_UUID));
+            else
+            {
+                msg.browse.uuid.len = LEN_UUID_16;
+                msg.browse.uuid.uu.uuid16 = GATT_UUID_CHAR_DECLARE;
+            }
+            break;
+
+        case GATT_READ_CHAR_VALUE_HDL:
+        case GATT_READ_BY_HANDLE:
+            if (!p_clcb->counter)
+            {
+                op_code = GATT_REQ_READ;
+                msg.handle = p_clcb->s_handle;
+            }
+            else
+            {
+                if (!p_clcb->first_read_blob_after_read)
+                    p_clcb->first_read_blob_after_read = TRUE;
+                else
+                    p_clcb->first_read_blob_after_read = FALSE;
+
+                GATT_TRACE_DEBUG1("gatt_act_read first_read_blob_after_read=%d",
+                                  p_clcb->first_read_blob_after_read);
+                op_code = GATT_REQ_READ_BLOB;
+                msg.read_blob.offset = offset;
+                msg.read_blob.handle = p_clcb->s_handle;
+            }
+            p_clcb->op_subtype &= ~ 0x80;
+            break;
+
+        case GATT_READ_PARTIAL:
+            op_code = GATT_REQ_READ_BLOB;
+            msg.read_blob.handle = p_clcb->s_handle;
+            msg.read_blob.offset = offset;
+            break;
+
+        case GATT_READ_MULTIPLE:
+            op_code = GATT_REQ_READ_MULTI;
+            memcpy (&msg.read_multi, p_clcb->p_attr_buf, sizeof(tGATT_READ_MULTI));
+            break;
+
+        case GATT_READ_INC_SRV_UUID128:
+            op_code = GATT_REQ_READ;
+            msg.handle = p_clcb->s_handle;
+            p_clcb->op_subtype &= ~ 0x90;
+            break;
+
+        default:
+            GATT_TRACE_ERROR1("Unknown read type: %d", p_clcb->op_subtype);
+            break;
+    }
+
+    if ( op_code == 0 ||
+         (rt = attp_send_cl_msg(p_tcb, p_clcb->clcb_idx, op_code, &msg)) != GATT_SUCCESS)
+    {
+        gatt_end_operation(p_clcb, rt, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_act_write
+**
+** Description      GATT write operation.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_act_write (tGATT_CLCB *p_clcb)
+{
+    tGATT_TCB           *p_tcb = p_clcb->p_tcb;
+    UINT8               rt = GATT_SUCCESS, op_code;
+    tGATT_VALUE         *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf;
+
+    if (p_attr)
+    {
+        switch (p_clcb->op_subtype)
+        {
+            case GATT_WRITE_NO_RSP:
+                p_clcb->s_handle = p_attr->handle;
+                op_code = (p_tcb->sec_act & GATT_SEC_SIGN_DATA) ? GATT_SIGN_CMD_WRITE : GATT_CMD_WRITE;
+                rt = gatt_send_write_msg(p_tcb,
+                                         p_clcb->clcb_idx,
+                                         op_code,
+                                         p_attr->handle,
+                                         p_attr->len,
+                                         0,
+                                         p_attr->value);
+                break;
+
+            case GATT_WRITE:
+                if (p_attr->len <= (p_tcb->payload_size - GATT_HDR_SIZE))
+                {
+                    p_clcb->s_handle = p_attr->handle;
+
+                    rt = gatt_send_write_msg(p_tcb,
+                                             p_clcb->clcb_idx,
+                                             GATT_REQ_WRITE,
+                                             p_attr->handle,
+                                             p_attr->len,
+                                             0,
+                                             p_attr->value);
+                }
+                else /* prepare write for long attribute */
+                {
+                    gatt_send_prepare_write(p_tcb, p_clcb);
+                }
+                break;
+
+            case GATT_WRITE_PREPARE:
+                gatt_send_prepare_write(p_tcb, p_clcb);
+                break;
+
+            default:
+                rt = GATT_INTERNAL_ERROR;
+                GATT_TRACE_ERROR1("Unknown write type: %d", p_clcb->op_subtype);
+                break;
+        }
+    }
+    else
+        rt = GATT_INTERNAL_ERROR;
+
+    if ((rt != GATT_SUCCESS  && rt != GATT_CMD_STARTED)
+        || (rt != GATT_CMD_STARTED && p_clcb->op_subtype == GATT_WRITE_NO_RSP))
+    {
+        if (rt != GATT_SUCCESS)
+        {
+            GATT_TRACE_ERROR1("gatt_act_write() failed op_code=0x%x", op_code);
+        }
+        gatt_end_operation(p_clcb, rt, NULL);
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_send_queue_write_cancel
+**
+** Description      send queue write cancel
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_send_queue_write_cancel (tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, tGATT_EXEC_FLAG flag)
+{
+    UINT8       rt ;
+
+    GATT_TRACE_DEBUG0("gatt_send_queue_write_cancel ");
+
+    rt = attp_send_cl_msg(p_tcb, p_clcb->clcb_idx, GATT_REQ_EXEC_WRITE, (tGATT_CL_MSG *)&flag);
+
+    if (rt != GATT_SUCCESS)
+    {
+        gatt_end_operation(p_clcb, rt, NULL);
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_check_write_long_terminate
+**
+** Description      To terminate write long or not.
+**
+** Returns          TRUE: write long is terminated; FALSE keep sending.
+**
+*******************************************************************************/
+BOOLEAN gatt_check_write_long_terminate(tGATT_TCB  *p_tcb, tGATT_CLCB *p_clcb, tGATT_VALUE *p_rsp_value)
+{
+    tGATT_VALUE         *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf;
+    BOOLEAN             exec = FALSE;
+    tGATT_EXEC_FLAG     flag = GATT_PREP_WRITE_EXEC;
+
+    GATT_TRACE_DEBUG0("gatt_check_write_long_terminate ");
+    /* check the first write response status */
+    if (p_rsp_value != NULL)
+    {
+        if (p_rsp_value->handle != p_attr->handle ||
+            p_rsp_value->len != p_clcb->counter ||
+            memcmp(p_rsp_value->value, p_attr->value + p_attr->offset, p_rsp_value->len))
+        {
+            /* data does not match    */
+            p_clcb->status = GATT_ERROR;
+            flag = GATT_PREP_WRITE_CANCEL;
+            exec = TRUE;
+        }
+        else /* response checking is good */
+        {
+            p_clcb->status = GATT_SUCCESS;
+            /* update write offset and check if end of attribute value */
+            if ((p_attr->offset += p_rsp_value->len) >= p_attr->len)
+                exec = TRUE;
+        }
+    }
+    if (exec)
+    {
+        gatt_send_queue_write_cancel (p_tcb, p_clcb, flag);
+        return TRUE;
+    }
+    return FALSE;
+}
+/*******************************************************************************
+**
+** Function         gatt_send_prepare_write
+**
+** Description      Send prepare write.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_send_prepare_write(tGATT_TCB  *p_tcb, tGATT_CLCB *p_clcb)
+{
+    tGATT_VALUE  *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf;
+    UINT16  to_send, offset;
+    UINT8   rt = GATT_SUCCESS;
+    UINT8   type = p_clcb->op_subtype;
+
+    GATT_TRACE_DEBUG1("gatt_send_prepare_write type=0x%x", type );
+    to_send = p_attr->len - p_attr->offset;
+
+    if (to_send > (p_tcb->payload_size - GATT_WRITE_LONG_HDR_SIZE)) /* 2 = UINT16 offset bytes  */
+        to_send = p_tcb->payload_size - GATT_WRITE_LONG_HDR_SIZE;
+
+    p_clcb->s_handle = p_attr->handle;
+
+    offset = p_attr->offset;
+    if (type == GATT_WRITE_PREPARE)
+    {
+        offset += p_clcb->start_offset;
+    }
+
+    GATT_TRACE_DEBUG2("offset =0x%x len=%d", offset, to_send );
+
+    rt = gatt_send_write_msg(p_tcb,
+                             p_clcb->clcb_idx,
+                             GATT_REQ_PREPARE_WRITE,
+                             p_attr->handle,
+                             to_send,                           /* length */
+                             offset,                            /* used as offset */
+                             p_attr->value + p_attr->offset);   /* data */
+
+    /* remember the write long attribute length */
+    p_clcb->counter = to_send;
+
+    if (rt != GATT_SUCCESS )
+    {
+        gatt_end_operation(p_clcb, rt, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_proc_disc_read_by_type_rsp
+**
+** Description      This function process the read by type response and send another
+**                  request if needed.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_proc_disc_read_by_type_rsp(tGATT_CLCB *p_clcb, UINT16 len, UINT8 *p_data)
+{
+    /*
+      tGATT_TCB   *p_tcb = p_clcb->p_tcb;
+      tGATT_DISCOVERY_DB  *p_db = p_clcb->p_disc_db;
+      tGATT_DISC_REC      *p_rec;
+      tGATT_STATUS         status = GATT_INTERNAL_ERROR;
+
+
+      if ((p_rec = gatt_add_record(p_clcb->p_disc_db)) != NULL)
+      {
+          p_rec->handle   = handle;
+          p_rec->type     = p_db->uuid_filter;
+          p_rec->attr_len = len;
+
+          // copy the attibute value into DB
+          p_rec->p_value  = p_db->p_free_mem;
+          memcpy(p_rec->p_value, p_value, len);
+          p_db->p_free_mem += len;
+          p_db->mem_free -= len;
+
+          if (handle < p_clcb->e_handle)
+          {
+              // send another request
+              if (gatt_act_send_browse(p_tcb, p_clcb->conn_id,
+                                       GATT_REQ_READ_BY_TYPE,
+                                       (UINT16)(handle + 1), // starting handle
+                                       p_clcb->e_handle,              // end handle
+                                       p_clcb->p_disc_db->uuid_filter) // uuid filter /
+                          == GATT_SUCCESS)
+              {
+                  status = GATT_SUCCESS;
+              }
+          }
+      }
+      else
+          status = GATT_DB_FULL;
+
+      if (status != GATT_SUCCESS) // DB full
+      {
+          gatt_end_operation(p_clcb, status, NULL);
+      }*/
+}
+/*******************************************************************************
+**
+** Function         gatt_process_find_type_value_rsp
+**
+** Description      This function is called to handle find by type value response.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_find_type_value_rsp (tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT16 len, UINT8 *p_data)
+{
+    tGATT_DISC_RES      result;
+    tGATT_DISC_VALUE    record_value;
+    UINT8               *p = p_data;
+
+    GATT_TRACE_DEBUG0("gatt_process_find_type_value_rsp ");
+    /* unexpected response */
+    if (p_clcb->operation != GATTC_OPTYPE_DISCOVERY || p_clcb->op_subtype != GATT_DISC_SRVC_BY_UUID)
+        return;
+
+    memset (&record_value, 0, sizeof(tGATT_DISC_VALUE));
+    result.type.len = 2;
+    result.type.uu.uuid16 = GATT_UUID_PRI_SERVICE;
+
+    /* returns a series of handle ranges */
+    while (len >= 4)
+    {
+        STREAM_TO_UINT16 (result.handle, p);
+        STREAM_TO_UINT16 (record_value.handle, p);
+        len -= 4;
+
+        memcpy (&result.value, &record_value, sizeof (result.value));;
+
+        if (p_clcb->p_reg->app_cb.p_disc_res_cb)
+            (*p_clcb->p_reg->app_cb.p_disc_res_cb)(p_clcb->conn_id, p_clcb->op_subtype, &result);
+    }
+
+    /* last handle  + 1 */
+    p_clcb->s_handle = (record_value.handle == 0) ? 0 : (record_value.handle + 1);
+    /* initiate another request */
+    gatt_act_discovery(p_clcb) ;
+}
+/*******************************************************************************
+**
+** Function         gatt_process_read_info_rsp
+**
+** Description      This function is called to handle the read information
+**                  response.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_read_info_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 op_code,
+                                UINT16 len, UINT8 *p_data)
+{
+    tGATT_DISC_RES  result;
+    UINT8   *p = p_data, uuid_len = 0, type;
+
+    /* unexpected response */
+    if (p_clcb->operation != GATTC_OPTYPE_DISCOVERY || p_clcb->op_subtype != GATT_DISC_CHAR_DSCPT)
+        return;
+
+    STREAM_TO_UINT8(type, p);
+    len -= 1;
+
+    if (type == GATT_INFO_TYPE_PAIR_16)
+        uuid_len = LEN_UUID_16;
+    else if (type == GATT_INFO_TYPE_PAIR_128)
+        uuid_len = LEN_UUID_128;
+
+    while (len >= uuid_len + 2)
+    {
+        STREAM_TO_UINT16 (result.handle, p);
+
+        if (uuid_len > 0)
+        {
+            if (!gatt_parse_uuid_from_cmd(&result.type, uuid_len, &p))
+                break;
+        }
+        else
+            memcpy (&result.type, &p_clcb->uuid, sizeof(tBT_UUID));
+
+        len -= (uuid_len + 2);
+
+        if (p_clcb->p_reg->app_cb.p_disc_res_cb)
+            (*p_clcb->p_reg->app_cb.p_disc_res_cb)(p_clcb->conn_id, p_clcb->op_subtype, &result);
+    }
+
+    p_clcb->s_handle = (result.handle == 0) ? 0 :(result.handle + 1);
+    /* initiate another request */
+    gatt_act_discovery(p_clcb) ;
+}
+/*******************************************************************************
+**
+** Function         gatt_proc_disc_error_rsp
+**
+** Description      This function process the read by type response and send another
+**                  request if needed.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_proc_disc_error_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 opcode,
+                              UINT16 handle, UINT8 reason)
+{
+    tGATT_STATUS    status = (tGATT_STATUS) reason;
+
+    GATT_TRACE_DEBUG2("gatt_proc_disc_error_rsp reason: %02x cmd_code %04x", reason, opcode);
+
+    switch (opcode)
+    {
+        case GATT_REQ_READ_BY_GRP_TYPE:
+        case GATT_REQ_FIND_TYPE_VALUE:
+        case GATT_REQ_READ_BY_TYPE:
+        case GATT_REQ_FIND_INFO:
+            if (reason == GATT_NOT_FOUND)
+            {
+                status = GATT_SUCCESS;
+                GATT_TRACE_DEBUG0("Discovery completed");
+            }
+            break;
+        default:
+            GATT_TRACE_ERROR1("Incorrect discovery opcode %04x",   opcode);
+            break;
+    }
+
+    gatt_end_operation(p_clcb, status, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_process_error_rsp
+**
+** Description      This function is called to handle the error response
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_error_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 op_code,
+                            UINT16 len, UINT8 *p_data)
+{
+    UINT8   opcode, reason, * p= p_data;
+    UINT16  handle;
+    tGATT_VALUE  *p_attr = (tGATT_VALUE *)p_clcb->p_attr_buf;
+
+    GATT_TRACE_DEBUG0("gatt_process_error_rsp ");
+    STREAM_TO_UINT8(opcode, p);
+    STREAM_TO_UINT16(handle, p);
+    STREAM_TO_UINT8(reason, p);
+
+    if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY)
+    {
+        gatt_proc_disc_error_rsp(p_tcb, p_clcb, opcode, handle, reason);
+    }
+    else
+    {
+        if ( (p_clcb->operation == GATTC_OPTYPE_WRITE) &&
+             (p_clcb->op_subtype == GATT_WRITE) &&
+             (opcode == GATT_REQ_PREPARE_WRITE) &&
+             (p_attr) &&
+             (handle == p_attr->handle)  )
+        {
+            p_clcb->status = reason;
+            gatt_send_queue_write_cancel(p_tcb, p_clcb, GATT_PREP_WRITE_CANCEL);
+        }
+        else if ((p_clcb->operation == GATTC_OPTYPE_READ) &&
+                 ((p_clcb->op_subtype == GATT_READ_CHAR_VALUE_HDL) ||
+                  (p_clcb->op_subtype == GATT_READ_BY_HANDLE)) &&
+                 (opcode == GATT_REQ_READ_BLOB) &&
+                 p_clcb->first_read_blob_after_read &&
+                 (reason == GATT_NOT_LONG))
+        {
+            gatt_end_operation(p_clcb, GATT_SUCCESS, (void *)p_clcb->p_attr_buf);
+        }
+        else
+            gatt_end_operation(p_clcb, reason, NULL);
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_process_prep_write_rsp
+**
+** Description      This function is called to handle the read response
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_prep_write_rsp (tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 op_code,
+                                  UINT16 len, UINT8 *p_data)
+{
+    tGATT_VALUE  value = {0};
+    UINT8        *p= p_data;
+
+    GATT_TRACE_ERROR2("value resp op_code = %s len = %d", gatt_dbg_op_name(op_code), len);
+
+    STREAM_TO_UINT16 (value.handle, p);
+    STREAM_TO_UINT16 (value.offset, p);
+
+    value.len = len - 4;
+
+    memcpy (value.value, p, value.len);
+
+    if (p_clcb->op_subtype == GATT_WRITE_PREPARE)
+    {
+        p_clcb->status = GATT_SUCCESS;
+        /* application should verify handle offset
+           and value are matched or not */
+
+        gatt_end_operation(p_clcb, p_clcb->status, &value);
+    }
+    else if (p_clcb->op_subtype == GATT_WRITE )
+    {
+        if (!gatt_check_write_long_terminate(p_tcb, p_clcb, &value))
+            gatt_send_prepare_write(p_tcb, p_clcb);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         gatt_process_notification
+**
+** Description      This function is called to handle the handle value indication
+**                  or handle value notification.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_notification(tGATT_TCB *p_tcb, UINT8 op_code,
+                               UINT16 len, UINT8 *p_data)
+{
+    tGATT_VALUE     value = {0};
+    tGATT_REG       *p_reg;
+    UINT16          conn_id;
+    tGATT_STATUS    encrypt_status;
+    UINT8           *p= p_data, i,
+    event = (op_code == GATT_HANDLE_VALUE_NOTIF) ? GATTC_OPTYPE_NOTIFICATION : GATTC_OPTYPE_INDICATION;
+
+    GATT_TRACE_DEBUG0("gatt_process_notification ");
+
+    STREAM_TO_UINT16 (value.handle, p);
+    value.len = len - 2;
+    memcpy (value.value, p, value.len);
+
+    if (!GATT_HANDLE_IS_VALID(value.handle))
+    {
+        /* illegal handle, send ack now */
+        if (op_code == GATT_HANDLE_VALUE_IND)
+            attp_send_cl_msg(p_tcb, 0, GATT_HANDLE_VALUE_CONF, NULL);
+        return;
+    }
+
+    if (event == GATTC_OPTYPE_INDICATION)
+    {
+        if (p_tcb->ind_count)
+        {
+            /* this is an error case that receiving an indication but we
+               still has an indication not being acked yet.
+               For now, just log the error reset the counter.
+               Later we need to disconnect the link unconditionally.
+            */
+            GATT_TRACE_ERROR1("gatt_process_notification rcv Ind. but ind_count=%d (will reset ind_count)",  p_tcb->ind_count);
+        }
+        p_tcb->ind_count = 0;
+    }
+
+    /* should notify all registered client with the handle value notificaion/indication
+       Note: need to do the indication count and start timer first then do callback
+     */
+
+    for (i = 0, p_reg = gatt_cb.cl_rcb; i < GATT_MAX_APPS; i++, p_reg++)
+    {
+        if (p_reg->in_use && p_reg->app_cb.p_cmpl_cb && (event == GATTC_OPTYPE_INDICATION))
+            p_tcb->ind_count++;
+    }
+
+    if (event == GATTC_OPTYPE_INDICATION)
+    {
+        /* start a timer for app confirmation */
+        if (p_tcb->ind_count > 0)
+            gatt_start_ind_ack_timer(p_tcb);
+        else /* no app to indicate, or invalid handle */
+            attp_send_cl_msg(p_tcb, 0, GATT_HANDLE_VALUE_CONF, NULL);
+    }
+
+    for (i = 0, p_reg = gatt_cb.cl_rcb; i < GATT_MAX_APPS; i++, p_reg++)
+    {
+        if (p_reg->in_use && p_reg->app_cb.p_cmpl_cb)
+        {
+            conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_reg->gatt_if);
+            encrypt_status = gatt_get_link_encrypt_status(p_tcb);
+            (*p_reg->app_cb.p_cmpl_cb) (conn_id, event, encrypt_status, (tGATT_CL_COMPLETE *)&value);
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_process_read_by_type_rsp
+**
+** Description      This function is called to handle the read by type response.
+**                  read by type can be used for discovery, or read by type or
+**                  read characteristic value.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_read_by_type_rsp (tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 op_code,
+                                    UINT16 len, UINT8 *p_data)
+{
+    tGATT_DISC_RES      result;
+    tGATT_DISC_VALUE    record_value;
+    UINT8               *p = p_data, value_len, handle_len = 2;
+    UINT16              handle = 0;
+
+    /* discovery procedure and no callback function registered */
+    if (((!p_clcb->p_reg) || (!p_clcb->p_reg->app_cb.p_disc_res_cb)) && (p_clcb->operation == GATTC_OPTYPE_DISCOVERY))
+        return;
+
+    STREAM_TO_UINT8(value_len, p);
+
+    if ((value_len > (p_tcb->payload_size - 2)) || (value_len > (len-1))  )
+    {
+        /* this is an error case that server's response containing a value length which is larger than MTU-2
+           or value_len > message total length -1 */
+        GATT_TRACE_ERROR4("gatt_process_read_by_type_rsp: Discard response op_code=%d vale_len=%d > (MTU-2=%d or msg_len-1=%d)",
+                          op_code, value_len, (p_tcb->payload_size - 2), (len-1));
+        gatt_end_operation(p_clcb, GATT_ERROR, NULL);
+        return;
+    }
+
+    if (op_code == GATT_RSP_READ_BY_GRP_TYPE)
+        handle_len = 4;
+
+    value_len -= handle_len; /* substract the handle pairs bytes */
+    len -= 1;
+
+    while (len >= (handle_len + value_len))
+    {
+        STREAM_TO_UINT16(handle, p);
+
+        if (!GATT_HANDLE_IS_VALID(handle))
+        {
+            gatt_end_operation(p_clcb, GATT_INVALID_HANDLE, NULL);
+            return;
+        }
+
+        memset(&result, 0, sizeof(tGATT_DISC_RES));
+        memset(&record_value, 0, sizeof(tGATT_DISC_VALUE));
+
+        result.handle = handle;
+        result.type.len = 2;
+        result.type.uu.uuid16 = disc_type_to_uuid[p_clcb->op_subtype];
+
+        /* discover all services */
+        if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY &&
+            p_clcb->op_subtype == GATT_DISC_SRVC_ALL &&
+            op_code == GATT_RSP_READ_BY_GRP_TYPE)
+        {
+            STREAM_TO_UINT16(handle, p);
+
+            if (!GATT_HANDLE_IS_VALID(handle))
+            {
+                gatt_end_operation(p_clcb, GATT_INVALID_HANDLE, NULL);
+                return;
+            }
+            else
+            {
+                record_value.group_value.e_handle = handle;
+                if (!gatt_parse_uuid_from_cmd(&record_value.group_value.service_type, value_len, &p))
+                {
+                    GATT_TRACE_ERROR0("discover all service response parsing failure");
+                    break;
+                }
+            }
+        }
+        /* discover included service */
+        else if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY && p_clcb->op_subtype == GATT_DISC_INC_SRVC)
+        {
+            STREAM_TO_UINT16(record_value.incl_service.s_handle, p);
+            STREAM_TO_UINT16(record_value.incl_service.e_handle, p);
+
+            if (!GATT_HANDLE_IS_VALID(record_value.incl_service.s_handle) ||
+                !GATT_HANDLE_IS_VALID(record_value.incl_service.e_handle))
+            {
+                gatt_end_operation(p_clcb, GATT_INVALID_HANDLE, NULL);
+                return;
+            }
+
+            if(value_len == 6)
+            {
+                STREAM_TO_UINT16(record_value.incl_service.service_type.uu.uuid16, p);
+                record_value.incl_service.service_type.len = LEN_UUID_16;
+            }
+            else if (value_len == 4)
+            {
+                p_clcb->s_handle = record_value.incl_service.s_handle;
+                p_clcb->read_uuid128.wait_for_read_rsp = TRUE;
+                p_clcb->read_uuid128.next_disc_start_hdl = handle + 1;
+                memcpy(&p_clcb->read_uuid128.result, &result, sizeof(result));
+                memcpy(&p_clcb->read_uuid128.result.value, &record_value, sizeof (result.value));
+                p_clcb->op_subtype |= 0x90;
+                gatt_act_read(p_clcb, 0);
+                return;
+            }
+            else
+            {
+               GATT_TRACE_ERROR1("gatt_process_read_by_type_rsp INCL_SRVC failed with invalid data value_len=%d", value_len);
+               gatt_end_operation(p_clcb, GATT_INVALID_PDU, (void *)p);
+               return;
+            }
+        }
+        /* read by type */
+        else if (p_clcb->operation == GATTC_OPTYPE_READ && p_clcb->op_subtype == GATT_READ_BY_TYPE)
+        {
+            p_clcb->counter = len - 2;
+            p_clcb->s_handle = handle;
+            if ( p_clcb->counter == (p_clcb->p_tcb->payload_size -4))
+            {
+                p_clcb->op_subtype = GATT_READ_BY_HANDLE;
+                if (!p_clcb->p_attr_buf)
+                    p_clcb->p_attr_buf = (UINT8 *)GKI_getbuf(GATT_MAX_ATTR_LEN);
+                if (p_clcb->p_attr_buf && p_clcb->counter <= GATT_MAX_ATTR_LEN)
+                {
+                    memcpy(p_clcb->p_attr_buf, p, p_clcb->counter);
+                    gatt_act_read(p_clcb, p_clcb->counter);
+                }
+                else
+                   gatt_end_operation(p_clcb, GATT_INTERNAL_ERROR, (void *)p);
+            }
+            else
+            {
+                 gatt_end_operation(p_clcb, GATT_SUCCESS, (void *)p);
+            }
+            return;
+        }
+        else /* discover characterisitic or read characteristic value */
+        {
+            STREAM_TO_UINT8 (record_value.dclr_value.char_prop, p);
+            STREAM_TO_UINT16(record_value.dclr_value.val_handle, p);
+            if (!GATT_HANDLE_IS_VALID(record_value.dclr_value.val_handle))
+            {
+                gatt_end_operation(p_clcb, GATT_INVALID_HANDLE, NULL);
+                return;
+            }
+            gatt_parse_uuid_from_cmd(&record_value.dclr_value.char_uuid, (UINT16)(value_len - 3), &p);
+
+            /* UUID not matching */
+            if (!gatt_uuid_compare(record_value.dclr_value.char_uuid, p_clcb->uuid))
+            {
+                len -= (value_len + 2);
+                continue; /* skip the result, and look for next one */
+            }
+            else if (p_clcb->operation == GATTC_OPTYPE_READ)
+            /* UUID match for read characteristic value */
+            {
+                /* only read the first matching UUID characteristic value, and
+                  discard the rest results */
+                p_clcb->s_handle = record_value.dclr_value.val_handle;
+                p_clcb->op_subtype |= 0x80;
+                gatt_act_read(p_clcb, 0);
+                return;
+            }
+        }
+        len -= (value_len + handle_len);
+
+        /* result is (handle, 16bits UUID) pairs */
+        memcpy (&result.value, &record_value, sizeof (result.value));
+
+        /* send callback if is discover procedure */
+        if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY && p_clcb->p_reg->app_cb.p_disc_res_cb)
+            (*p_clcb->p_reg->app_cb.p_disc_res_cb)(p_clcb->conn_id, p_clcb->op_subtype, &result);
+    }
+
+    p_clcb->s_handle = (handle == 0) ? 0 : (handle + 1);
+
+    if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY)
+    {
+        /* initiate another request */
+        gatt_act_discovery(p_clcb) ;
+    }
+    else /* read characteristic value */
+    {
+        gatt_act_read(p_clcb, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_process_read_rsp
+**
+** Description      This function is called to handle the read BLOB response
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_read_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb,  UINT8 op_code,
+                           UINT16 len, UINT8 *p_data)
+{
+    UINT16      offset = p_clcb->counter;
+    UINT8       * p= p_data;
+
+    if (p_clcb->operation == GATTC_OPTYPE_READ)
+    {
+        if (p_clcb->op_subtype != GATT_READ_BY_HANDLE)
+        {
+            p_clcb->counter = len;
+            gatt_end_operation(p_clcb, GATT_SUCCESS, (void *)p);
+        }
+        else
+        {
+
+            /* allocate GKI buffer holding up long attribute value  */
+            if (!p_clcb->p_attr_buf)
+                p_clcb->p_attr_buf = (UINT8 *)GKI_getbuf(GATT_MAX_ATTR_LEN);
+
+            /* copy attrobute value into cb buffer  */
+            if (p_clcb->p_attr_buf && offset < GATT_MAX_ATTR_LEN)
+            {
+                if ((len + offset) > GATT_MAX_ATTR_LEN)
+                    len = GATT_MAX_ATTR_LEN - offset;
+
+                p_clcb->counter += len;
+
+                memcpy(p_clcb->p_attr_buf + offset, p, len);
+
+                /* send next request if needed  */
+
+                if (len == (p_tcb->payload_size - 1) && /* full packet for read or read blob rsp */
+                    len + offset < GATT_MAX_ATTR_LEN)
+                {
+                    GATT_TRACE_DEBUG3("full pkt issue read blob for remianing bytes old offset=%d len=%d new offset=%d",
+                                      offset, len, p_clcb->counter);
+                    gatt_act_read(p_clcb, p_clcb->counter);
+                }
+                else /* end of request, send callback */
+                {
+                    gatt_end_operation(p_clcb, GATT_SUCCESS, (void *)p_clcb->p_attr_buf);
+                }
+            }
+            else /* exception, should not happen */
+            {
+                GATT_TRACE_ERROR2("attr offset = %d p_attr_buf = %d ", offset, p_clcb->p_attr_buf);
+                gatt_end_operation(p_clcb, GATT_NO_RESOURCES, (void *)p_clcb->p_attr_buf);
+            }
+        }
+    }
+    else
+    {
+        if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY &&
+            p_clcb->op_subtype == GATT_DISC_INC_SRVC &&
+            p_clcb->read_uuid128.wait_for_read_rsp )
+        {
+            p_clcb->s_handle = p_clcb->read_uuid128.next_disc_start_hdl;
+            p_clcb->read_uuid128.wait_for_read_rsp = FALSE;
+            if (len == LEN_UUID_128)
+            {
+
+                memcpy(p_clcb->read_uuid128.result.value.incl_service.service_type.uu.uuid128, p, len);
+                p_clcb->read_uuid128.result.value.incl_service.service_type.len = LEN_UUID_128;
+                if ( p_clcb->p_reg->app_cb.p_disc_res_cb)
+                    (*p_clcb->p_reg->app_cb.p_disc_res_cb)(p_clcb->conn_id, p_clcb->op_subtype, &p_clcb->read_uuid128.result);
+                gatt_act_discovery(p_clcb) ;
+            }
+            else
+            {
+                gatt_end_operation(p_clcb, GATT_INVALID_PDU, (void *)p);
+            }
+        }
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_process_handle_rsp
+**
+** Description      This function is called to handle the write response
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_handle_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    UINT16      handle;
+    UINT8       * p= p_data;
+
+    STREAM_TO_UINT16(handle, p);
+    len -= 2;
+
+    if (op_code == GATT_RSP_WRITE)
+        gatt_end_operation(p_clcb, GATT_SUCCESS, NULL);
+}
+/*******************************************************************************
+**
+** Function         gatt_process_mtu_rsp
+**
+** Description      This function is called to process the configure MTU response.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_mtu_rsp(tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, UINT16 len, UINT8 *p_data)
+{
+    UINT16 mtu;
+
+    STREAM_TO_UINT16(mtu, p_data);
+
+    if (mtu < p_tcb->payload_size && mtu >= GATT_DEF_BLE_MTU_SIZE)
+        p_tcb->payload_size = mtu;
+
+    gatt_end_operation(p_clcb, p_clcb->status, NULL);
+}
+/*******************************************************************************
+**
+** Function         gatt_cmd_to_rsp_code
+**
+** Description      The function convert a ATT command op code into the corresponding
+**                  response code assume no error occurs.
+**
+** Returns          response code.
+**
+*******************************************************************************/
+UINT8 gatt_cmd_to_rsp_code (UINT8 cmd_code)
+{
+    UINT8   rsp_code  = 0;
+
+    if (cmd_code > 1 && cmd_code != GATT_CMD_WRITE)
+    {
+        rsp_code = cmd_code + 1;
+    }
+    return rsp_code;
+}
+/*******************************************************************************
+**
+** Function         gatt_cl_send_next_cmd_inq
+**
+** Description      Find next command in queue and sent to server
+**
+** Returns          TRUE if command sent, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN gatt_cl_send_next_cmd_inq(tGATT_TCB *p_tcb)
+{
+    tGATT_CMD_Q  *p_cmd = &p_tcb->cl_cmd_q[p_tcb->pending_cl_req];
+    BOOLEAN     sent = FALSE;
+
+    while (!sent &&
+           p_tcb->pending_cl_req != p_tcb->next_slot_inq &&
+           p_cmd->to_send && p_cmd->p_cmd != NULL)
+    {
+        sent = attp_send_msg_to_L2CAP(p_tcb, p_cmd->p_cmd);
+
+        if (sent)
+        {
+            p_cmd->to_send = FALSE;
+            p_cmd->p_cmd = NULL;
+
+            gatt_start_rsp_timer (p_tcb);
+        }
+        else
+        {
+            GATT_TRACE_ERROR0("gatt_cl_send_next_cmd_inq: L2CAP sent error");
+
+            memset(p_cmd, 0, sizeof(tGATT_CMD_Q));
+            p_tcb->pending_cl_req ++;
+            p_cmd = &p_tcb->cl_cmd_q[p_tcb->pending_cl_req];
+        }
+    }
+    return sent;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_client_handle_server_rsp
+**
+** Description      This function is called to handle the server response to
+**                  client.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_client_handle_server_rsp (tGATT_TCB *p_tcb, UINT8 op_code,
+                                    UINT16 len, UINT8 *p_data)
+{
+    tGATT_CLCB   *p_clcb = NULL;
+    UINT8        rsp_code;
+
+    if (op_code != GATT_HANDLE_VALUE_IND && op_code != GATT_HANDLE_VALUE_NOTIF)
+    {
+        p_clcb = gatt_cmd_dequeue(p_tcb, &rsp_code);
+
+        rsp_code = gatt_cmd_to_rsp_code(rsp_code);
+
+        if (p_clcb == NULL || (rsp_code != op_code && op_code != GATT_RSP_ERROR))
+        {
+            GATT_TRACE_WARNING2 ("ATT - Ignore wrong response. Receives (%02x) \
+                                Request(%02x) Ignored", op_code, rsp_code);
+
+            return;
+        }
+        else
+            btu_stop_timer (&p_tcb->rsp_timer_ent);
+    }
+    /* the size of the message may not be bigger than the local max PDU size*/
+    /* The message has to be smaller than the agreed MTU, len does not count op_code */
+    if (len >= p_tcb->payload_size)
+    {
+        GATT_TRACE_ERROR2("invalid response/indicate pkt size: %d, PDU size: %d", len + 1, p_tcb->payload_size);
+        if (op_code != GATT_HANDLE_VALUE_NOTIF &&
+            op_code != GATT_HANDLE_VALUE_IND)
+            gatt_end_operation(p_clcb, GATT_ERROR, NULL);
+    }
+    else
+    {
+        switch (op_code)
+        {
+            case GATT_RSP_ERROR:
+                gatt_process_error_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_MTU:       /* 2 bytes mtu */
+                gatt_process_mtu_rsp(p_tcb, p_clcb, len ,p_data);
+                break;
+
+            case GATT_RSP_FIND_INFO:
+                gatt_process_read_info_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_READ_BY_TYPE:
+            case GATT_RSP_READ_BY_GRP_TYPE:
+                gatt_process_read_by_type_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_READ:
+            case GATT_RSP_READ_BLOB:
+            case GATT_RSP_READ_MULTI:
+                gatt_process_read_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_FIND_TYPE_VALUE: /* disc service with UUID */
+                gatt_process_find_type_value_rsp(p_tcb, p_clcb, len, p_data);
+                break;
+
+            case GATT_RSP_WRITE:
+                gatt_process_handle_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_PREPARE_WRITE:
+                gatt_process_prep_write_rsp(p_tcb, p_clcb, op_code, len, p_data);
+                break;
+
+            case GATT_RSP_EXEC_WRITE:
+                gatt_end_operation(p_clcb, p_clcb->status, NULL);
+                break;
+
+            case GATT_HANDLE_VALUE_NOTIF:
+            case GATT_HANDLE_VALUE_IND:
+                gatt_process_notification(p_tcb, op_code, len, p_data);
+                break;
+
+            default:
+                GATT_TRACE_ERROR1("Unknown opcode = %d", op_code);
+                break;
+        }
+    }
+
+    if (op_code != GATT_HANDLE_VALUE_IND && op_code != GATT_HANDLE_VALUE_NOTIF)
+    {
+        gatt_cl_send_next_cmd_inq(p_tcb);
+    }
+
+    return;
+}
+
+#endif  /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_db.c b/stack/gatt/gatt_db.c
new file mode 100644
index 0000000..bd94e50
--- /dev/null
+++ b/stack/gatt/gatt_db.c
@@ -0,0 +1,1130 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains GATT database building and query functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+
+#include "bt_trace.h"
+
+#include <stdio.h>
+#include <string.h>
+#include "gatt_int.h"
+#include "l2c_api.h"
+
+/********************************************************************************
+**              L O C A L    F U N C T I O N     P R O T O T Y P E S            *
+*********************************************************************************/
+static BOOLEAN allocate_svc_db_buf(tGATT_SVC_DB *p_db);
+static void *allocate_attr_in_db(tGATT_SVC_DB *p_db, UINT16 uuid16, UINT8 *p_uuid128, tGATT_PERM perm);
+static BOOLEAN deallocate_attr_in_db(tGATT_SVC_DB *p_db, void *p_attr);
+static BOOLEAN copy_extra_byte_in_db(tGATT_SVC_DB *p_db, void **p_dst, UINT16 len);
+
+static void gatts_db_add_service_declaration(tGATT_SVC_DB *p_db, tBT_UUID service, BOOLEAN is_pri);
+static tGATT_STATUS gatts_send_app_read_request(tGATT_TCB *p_tcb, UINT8 op_code,
+                                                UINT16 handle, UINT16 offset, UINT32 trans_id);
+
+/*******************************************************************************
+**
+** Function         gatts_init_service_db
+**
+** Description      This function initialize a memory space to be a service database.
+**
+** Parameter        p_db: database pointer.
+**                  len: size of the memory space.
+**
+** Returns          Status of te operation.
+**
+*******************************************************************************/
+BOOLEAN gatts_init_service_db (tGATT_SVC_DB *p_db, tBT_UUID service,  BOOLEAN is_pri,
+                               UINT16 s_hdl, UINT16 num_handle)
+{
+    if (!allocate_svc_db_buf(p_db))
+    {
+        GATT_TRACE_ERROR0("gatts_init_service_db failed, no resources");
+        return FALSE;
+    }
+
+    GATT_TRACE_DEBUG0("gatts_init_service_db");
+    GATT_TRACE_DEBUG2("s_hdl = %d num_handle = %d", s_hdl, num_handle );
+
+    /* update service database information */
+    p_db->next_handle   = s_hdl;
+    p_db->end_handle    = s_hdl + num_handle;
+
+    gatts_db_add_service_declaration(p_db, service, is_pri);
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_init_service_db
+**
+** Description      This function initialize a memory space to be a service database.
+**
+** Parameter        p_db: database pointer.
+**                  len: size of the memory space.
+**
+** Returns          Status of te operation.
+**
+*******************************************************************************/
+tBT_UUID * gatts_get_service_uuid (tGATT_SVC_DB *p_db)
+{
+    if (!p_db || !p_db->p_attr_list)
+    {
+        GATT_TRACE_ERROR0("service DB empty");
+
+        return NULL;
+    }
+    else
+    {
+        return &((tGATT_ATTR16 *)p_db->p_attr_list)->p_value->uuid;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatts_check_attr_readability
+**
+** Description      check attribute readability
+**
+** Returns          status of operation.
+**
+*******************************************************************************/
+static tGATT_STATUS gatts_check_attr_readability(tGATT_ATTR16 *p_attr,
+                                                 UINT16 offset,
+                                                 BOOLEAN read_long,
+                                                 tGATT_SEC_FLAG sec_flag,
+                                                 UINT8 key_size)
+{
+    UINT16          min_key_size;
+    tGATT_PERM      perm = p_attr->permission;
+
+    min_key_size = (((perm & GATT_ENCRYPT_KEY_SIZE_MASK) >> 12));
+    if (min_key_size != 0 )
+    {
+        min_key_size +=6;
+    }
+
+    if (!(perm & GATT_READ_ALLOWED))
+    {
+        GATT_TRACE_ERROR0( "GATT_READ_NOT_PERMIT");
+        return GATT_READ_NOT_PERMIT;
+    }
+
+    if ((perm & GATT_READ_AUTH_REQUIRED ) && !(sec_flag & GATT_SEC_FLAG_LKEY_UNAUTHED))
+    {
+        GATT_TRACE_ERROR0( "GATT_INSUF_AUTHENTICATION");
+        return GATT_INSUF_AUTHENTICATION;
+    }
+
+    if ((perm & GATT_READ_MITM_REQUIRED ) && !(sec_flag & GATT_SEC_FLAG_LKEY_AUTHED))
+    {
+        GATT_TRACE_ERROR0( "GATT_INSUF_AUTHENTICATION: MITM Required");
+        return GATT_INSUF_AUTHENTICATION;
+    }
+
+    if ((perm & GATT_READ_ENCRYPTED_REQUIRED ) && !(sec_flag & GATT_SEC_FLAG_ENCRYPTED))
+    {
+        GATT_TRACE_ERROR0( "GATT_INSUF_ENCRYPTION");
+        return GATT_INSUF_ENCRYPTION;
+    }
+
+    if ( (perm & GATT_READ_ENCRYPTED_REQUIRED) && (sec_flag & GATT_SEC_FLAG_ENCRYPTED) && (key_size < min_key_size))
+    {
+        GATT_TRACE_ERROR0( "GATT_INSUF_KEY_SIZE");
+        return GATT_INSUF_KEY_SIZE;
+    }
+
+
+    if (read_long)
+    {
+        switch (p_attr->uuid)
+        {
+            case GATT_UUID_PRI_SERVICE:
+            case GATT_UUID_SEC_SERVICE:
+            case GATT_UUID_CHAR_DECLARE:
+            case GATT_UUID_INCLUDE_SERVICE:
+            case GATT_UUID_CHAR_EXT_PROP:
+            case GATT_UUID_CHAR_CLIENT_CONFIG:
+            case GATT_UUID_CHAR_SRVR_CONFIG:
+            case GATT_UUID_CHAR_PRESENT_FORMAT:
+                GATT_TRACE_ERROR0("GATT_NOT_LONG");
+                return GATT_NOT_LONG;
+
+            default:
+                break;
+        }
+    }
+
+    return GATT_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         read_attr_value
+**
+** Description      Utility function to read an attribute value.
+**
+** Parameter        p_attr: pointer to the attribute to read.
+**                  offset: read offset.
+**                  p_value: output parameter to carry out the attribute value.
+**                  p_len: output parameter to carry out the attribute length.
+**                  read_long: this is a read blob request.
+**                  mtu: MTU
+**                  sec_flag: current link security status.
+**                  key_size: encryption key size.
+**
+** Returns          status of operation.
+**
+*******************************************************************************/
+static tGATT_STATUS read_attr_value (void *p_attr,
+                                     UINT16 offset,
+                                     UINT8 **p_data,
+                                     BOOLEAN read_long,
+                                     UINT16 mtu,
+                                     UINT16 *p_len,
+                                     tGATT_SEC_FLAG sec_flag,
+                                     UINT8 key_size)
+{
+    UINT16          len = 0, uuid16 = 0;
+    UINT8           *p = *p_data;
+    tGATT_STATUS    status;
+    UINT16          read_long_uuid=0;
+    tGATT_ATTR16    *p_attr16  = (tGATT_ATTR16  *)p_attr;
+
+    GATT_TRACE_DEBUG5("read_attr_value uuid=0x%04x perm=0x%0x sec_flag=0x%x offset=%d read_long=%d",
+                      p_attr16->uuid,
+                      p_attr16->permission,
+                      sec_flag,
+                      offset,
+                      read_long);
+
+    status = gatts_check_attr_readability((tGATT_ATTR16 *)p_attr, offset, read_long, sec_flag, key_size);
+
+    if (p_attr16->uuid_type == GATT_ATTR_UUID_TYPE_16)
+        uuid16 = p_attr16->uuid;
+
+    if (status != GATT_SUCCESS)
+        return status;
+
+    status = GATT_NO_RESOURCES;
+
+    if (read_long &&
+        (uuid16 == GATT_UUID_CHAR_DESCRIPTION || uuid16 == GATT_UUID_CHAR_AGG_FORMAT))
+    {
+        read_long_uuid = p_attr16->uuid;
+    }
+
+    if (uuid16 == GATT_UUID_PRI_SERVICE || uuid16 == GATT_UUID_SEC_SERVICE)
+    {
+        len = p_attr16->p_value->uuid.len;
+        if (mtu >= p_attr16->p_value->uuid.len)
+        {
+            gatt_build_uuid_to_stream(&p, p_attr16->p_value->uuid);
+            status = GATT_SUCCESS;
+        }
+    }
+    else if (uuid16 == GATT_UUID_CHAR_DECLARE)
+    {
+        len = (((tGATT_ATTR16 *)(p_attr16->p_next))->uuid_type == GATT_ATTR_UUID_TYPE_16) ? 5 :19;
+
+        if (mtu >= len)
+        {
+            UINT8_TO_STREAM(p, p_attr16->p_value->char_decl.property);
+            UINT16_TO_STREAM(p, p_attr16->p_value->char_decl.char_val_handle);
+
+            if (((tGATT_ATTR16 *)(p_attr16->p_next))->uuid_type == GATT_ATTR_UUID_TYPE_16)
+            {
+                UINT16_TO_STREAM(p, ((tGATT_ATTR16 *)(p_attr16->p_next))->uuid);
+            }
+            else
+            {
+                ARRAY_TO_STREAM (p, ((tGATT_ATTR128 *)(p_attr16->p_next))->uuid, LEN_UUID_128);
+            }
+            status = GATT_SUCCESS;
+        }
+
+    }
+    else if (uuid16 == GATT_UUID_INCLUDE_SERVICE)
+    {
+        len = (p_attr16->p_value->incl_handle.service_type.len == 2) ? 6 : 4;
+        if (mtu >= len)
+        {
+            UINT16_TO_STREAM(p, p_attr16->p_value->incl_handle.s_handle);
+            UINT16_TO_STREAM(p, p_attr16->p_value->incl_handle.e_handle);
+
+            if (p_attr16->p_value->incl_handle.service_type.len == 2)
+            {
+                UINT16_TO_STREAM(p, p_attr16->p_value->incl_handle.service_type.uu.uuid16);
+            }
+            status = GATT_SUCCESS;
+        }
+    }
+    else /* characteristic description or characteristic value */
+    {
+        status = GATT_PENDING;
+    }
+
+    *p_len = len;
+    *p_data = p;
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_db_read_attr_value_by_type
+**
+** Description      Query attribute value by attribute type.
+**
+** Parameter        p_db: pointer to the attribute database.
+**                  p_rsp: Read By type response data.
+**                  s_handle: starting handle of the range we are looking for.
+**                  e_handle: ending handle of the range we are looking for.
+**                  type: Attribute type.
+**                  mtu: MTU.
+**                  sec_flag: current link security status.
+**                  key_size: encryption key size.
+**
+** Returns          Status of the operation.
+**
+*******************************************************************************/
+tGATT_STATUS gatts_db_read_attr_value_by_type (tGATT_TCB   *p_tcb,
+                                               tGATT_SVC_DB    *p_db,
+                                               UINT8        op_code,
+                                               BT_HDR      *p_rsp,
+                                               UINT16       s_handle,
+                                               UINT16       e_handle,
+                                               tBT_UUID     type,
+                                               UINT16      *p_len,
+                                               tGATT_SEC_FLAG sec_flag,
+                                               UINT8        key_size,
+                                               UINT32       trans_id,
+                                               UINT16       *p_cur_handle)
+{
+    tGATT_STATUS status = GATT_NOT_FOUND;
+    tGATT_ATTR16  *p_attr;
+    UINT16      len = 0;
+    UINT8       *p = (UINT8 *)(p_rsp + 1) + p_rsp->len + L2CAP_MIN_OFFSET;
+    tBT_UUID    attr_uuid;
+
+    if (p_db && p_db->p_attr_list)
+    {
+        p_attr = (tGATT_ATTR16 *)p_db->p_attr_list;
+
+        while (p_attr && p_attr->handle <= e_handle)
+        {
+            if (p_attr->uuid_type == GATT_ATTR_UUID_TYPE_16)
+            {
+                attr_uuid.len = LEN_UUID_16;
+                attr_uuid.uu.uuid16 = p_attr->uuid;
+            }
+            else
+            {
+                attr_uuid.len = LEN_UUID_128;
+                memcpy(attr_uuid.uu.uuid128, ((tGATT_ATTR128 *)p_attr)->uuid, LEN_UUID_128);
+            }
+
+            if (p_attr->handle >= s_handle && gatt_uuid_compare(type, attr_uuid))
+            {
+                if (*p_len <= 2)
+                {
+                    status = GATT_NO_RESOURCES;
+                    break;
+                }
+
+                UINT16_TO_STREAM (p, p_attr->handle);
+
+                status = read_attr_value ((void *)p_attr, 0, &p, FALSE, (UINT16)(*p_len -2), &len, sec_flag, key_size);
+
+                if (status == GATT_PENDING)
+                {
+                    status = gatts_send_app_read_request(p_tcb, op_code, p_attr->handle, 0, trans_id);
+
+                    /* one callback at a time */
+                    break;
+                }
+                else if (status == GATT_SUCCESS)
+                {
+                    if (p_rsp->offset == 0)
+                        p_rsp->offset = len + 2;
+
+                    if (p_rsp->offset == len + 2)
+                    {
+                        p_rsp->len += (len  + 2);
+                        *p_len -= (len + 2);
+                    }
+                    else
+                    {
+                        GATT_TRACE_ERROR0("format mismatch");
+                        status = GATT_NO_RESOURCES;
+                        break;
+                    }
+                }
+                else
+                {
+                    *p_cur_handle = p_attr->handle;
+                    break;
+                }
+            }
+            p_attr = (tGATT_ATTR16 *)p_attr->p_next;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_add_included_service
+**
+** Description      This function adds an included service into a database.
+**
+** Parameter        p_db: database pointer.
+**                  inc_srvc_type: included service type.
+**
+** Returns          Status of the operation.
+**
+*******************************************************************************/
+UINT16 gatts_add_included_service (tGATT_SVC_DB *p_db, UINT16 s_handle, UINT16 e_handle,
+                                   tBT_UUID service)
+{
+    tGATT_ATTR16      *p_attr;
+
+    GATT_TRACE_DEBUG3("gatts_add_included_service: s_hdl = 0x%04x e_hdl = 0x%04x uuid = 0x%04x",
+                      s_handle, e_handle, service.uu.uuid16);
+
+    if (service.len == 0 || s_handle == 0 || e_handle == 0)
+    {
+        GATT_TRACE_ERROR0("gatts_add_included_service Illegal Params.");
+        return 0;
+    }
+
+    if ((p_attr = (tGATT_ATTR16 *) allocate_attr_in_db(p_db, GATT_UUID_INCLUDE_SERVICE, NULL, GATT_PERM_READ)) != NULL)
+    {
+        if (copy_extra_byte_in_db(p_db, (void **)&p_attr->p_value, sizeof(tGATT_INCL_SRVC)))
+        {
+            p_attr->p_value->incl_handle.s_handle = s_handle;
+            p_attr->p_value->incl_handle.e_handle = e_handle;
+            memcpy(&p_attr->p_value->incl_handle.service_type, &service, sizeof(tBT_UUID));
+
+            return p_attr->handle;
+        }
+        else
+        {
+            deallocate_attr_in_db(p_db, p_attr);
+        }
+    }
+
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_add_characteristic
+**
+** Description      This function add a characteristics and its descriptor into
+**                  a servce identified by the service database pointer.
+**
+** Parameter        p_db: database pointer.
+**                  perm: permission (authentication and key size requirements)
+**                  property: property of the characteristic.
+**                  p_char: characteristic value information.
+**
+** Returns          Status of te operation.
+**
+*******************************************************************************/
+UINT16 gatts_add_characteristic (tGATT_SVC_DB *p_db, tGATT_PERM perm,
+                                 tGATT_CHAR_PROP property,
+                                 tBT_UUID * p_char_uuid)
+{
+    tGATT_ATTR16     *p_char_decl, *p_char_val;
+    UINT16          uuid16 = (p_char_uuid->len == LEN_UUID_16) ? p_char_uuid->uu.uuid16 : 0;
+
+    GATT_TRACE_DEBUG2("gatts_add_characteristic perm=0x%0x property=0x%0x", perm, property);
+
+    if ((p_char_decl = (tGATT_ATTR16 *)allocate_attr_in_db(p_db, GATT_UUID_CHAR_DECLARE, NULL, GATT_PERM_READ)) != NULL)
+    {
+        if (!copy_extra_byte_in_db(p_db, (void **)&p_char_decl->p_value, sizeof(tGATT_CHAR_DECL)))
+        {
+            deallocate_attr_in_db(p_db, p_char_decl);
+            return 0;
+        }
+
+        p_char_val = (tGATT_ATTR16 *)allocate_attr_in_db(p_db, uuid16, p_char_uuid->uu.uuid128, perm);
+
+        if (p_char_val == NULL)
+        {
+            deallocate_attr_in_db(p_db, p_char_decl);
+            return 0;
+        }
+
+        p_char_decl->p_value->char_decl.property = property;
+        p_char_decl->p_value->char_decl.char_val_handle  = p_char_val->handle;
+
+        p_char_val->p_value = NULL;
+
+        return p_char_val->handle;
+    }
+
+    return 0;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_convertchar_descr_type
+**
+** Description      This function convert a char descript UUID into descriptor type.
+**
+** Returns          descriptor type.
+**
+*******************************************************************************/
+UINT8 gatt_convertchar_descr_type(tBT_UUID *p_descr_uuid)
+{
+    tBT_UUID std_descr = {LEN_UUID_16, {GATT_UUID_CHAR_EXT_PROP}};
+
+    if (gatt_uuid_compare(std_descr, * p_descr_uuid))
+        return GATT_DESCR_EXT_DSCPTOR;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_USER_DSCPTOR;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_CLT_CONFIG;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_SVR_CONFIG;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_PRES_FORMAT;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_AGGR_FORMAT;
+
+    std_descr.uu.uuid16 ++;
+    if (gatt_uuid_compare(std_descr,  * p_descr_uuid))
+        return GATT_DESCR_VALID_RANGE;
+
+
+    return GATT_DESCR_UNKNOWN;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_add_char_descr
+**
+** Description      This function add a characteristics descriptor.
+**
+** Parameter        p_db: database pointer.
+**                  perm: characteristic descriptor permission type.
+**                  char_dscp_tpye: the characteristic descriptor masks.
+**                  p_dscp_params: characteristic descriptors values.
+**
+** Returns          Status of the operation.
+**
+*******************************************************************************/
+UINT16 gatts_add_char_descr (tGATT_SVC_DB *p_db, tGATT_PERM perm,
+                             tBT_UUID *     p_descr_uuid)
+{
+    tGATT_ATTR16    *p_char_dscptr;
+    UINT16    uuid16  = (p_descr_uuid->len == LEN_UUID_16)? p_descr_uuid->uu.uuid16 : 0;
+
+    GATT_TRACE_DEBUG1("gatts_add_char_descr uuid=0x%04x", p_descr_uuid->uu.uuid16);
+
+    /* Add characteristic descriptors */
+    if ((p_char_dscptr = (tGATT_ATTR16 *)allocate_attr_in_db(p_db,
+                                                             uuid16,
+                                                             p_descr_uuid->uu.uuid128,
+                                                             perm))
+        == NULL)
+    {
+        GATT_TRACE_DEBUG0("gatts_add_char_descr Fail for adding char descriptors.");
+        return 0;
+    }
+    else
+    {
+        return p_char_dscptr->handle;
+    }
+}
+
+/*******************************************************************************/
+/* Service Attribute Database Query Utility Functions */
+/*******************************************************************************/
+/*******************************************************************************
+**
+** Function         gatts_read_attr_value_by_handle
+**
+** Description      Query attribute value by attribute handle.
+**
+** Parameter        p_db: pointer to the attribute database.
+**                  handle: Attribute handle to read.
+**                  offset: Read offset.
+**                  p_value: output parameter to carry out the attribute value.
+**                  p_len: output parameter as attribute length read.
+**                  read_long: this is a read blob request.
+**                  mtu: MTU.
+**                  sec_flag: current link security status.
+**                  key_size: encryption key size
+**
+** Returns          Status of operation.
+**
+*******************************************************************************/
+tGATT_STATUS gatts_read_attr_value_by_handle(tGATT_TCB *p_tcb,
+                                             tGATT_SVC_DB *p_db,
+                                             UINT8 op_code,
+                                             UINT16 handle, UINT16 offset,
+                                             UINT8 *p_value, UINT16 *p_len,
+                                             UINT16 mtu,
+                                             tGATT_SEC_FLAG sec_flag,
+                                             UINT8 key_size,
+                                             UINT32 trans_id)
+{
+    tGATT_STATUS status = GATT_NOT_FOUND;
+    tGATT_ATTR16  *p_attr;
+    UINT8       *pp = p_value;
+
+    if (p_db && p_db->p_attr_list)
+    {
+        p_attr = (tGATT_ATTR16 *)p_db->p_attr_list;
+
+        while (p_attr && handle >= p_attr->handle)
+        {
+            if (p_attr->handle == handle)
+            {
+                status = read_attr_value (p_attr, offset, &pp,
+                                          (BOOLEAN)(op_code == GATT_REQ_READ_BLOB),
+                                          mtu, p_len, sec_flag, key_size);
+
+                if (status == GATT_PENDING)
+                {
+                    status = gatts_send_app_read_request(p_tcb, op_code, p_attr->handle, offset, trans_id);
+                }
+                break;
+            }
+            p_attr = (tGATT_ATTR16 *)p_attr->p_next;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_read_attr_perm_check
+**
+** Description      Check attribute readability.
+**
+** Parameter        p_db: pointer to the attribute database.
+**                  handle: Attribute handle to read.
+**                  offset: Read offset.
+**                  p_value: output parameter to carry out the attribute value.
+**                  p_len: output parameter as attribute length read.
+**                  read_long: this is a read blob request.
+**                  mtu: MTU.
+**                  sec_flag: current link security status.
+**                  key_size: encryption key size
+**
+** Returns          Status of operation.
+**
+*******************************************************************************/
+tGATT_STATUS gatts_read_attr_perm_check(tGATT_SVC_DB *p_db,
+                                        BOOLEAN is_long,
+                                        UINT16 handle,
+                                        tGATT_SEC_FLAG sec_flag,
+                                        UINT8 key_size)
+{
+    tGATT_STATUS status = GATT_NOT_FOUND;
+    tGATT_ATTR16  *p_attr;
+
+    if (p_db && p_db->p_attr_list)
+    {
+        p_attr = (tGATT_ATTR16 *)p_db->p_attr_list;
+
+        while (p_attr && handle >= p_attr->handle)
+        {
+            if (p_attr->handle == handle)
+            {
+                status = gatts_check_attr_readability (p_attr, 0,
+                                                       is_long,
+                                                       sec_flag, key_size);
+                break;
+            }
+            p_attr = (tGATT_ATTR16 *) p_attr->p_next;
+        }
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         gatts_write_attr_perm_check
+**
+** Description      Write attribute value into database.
+**
+** Parameter        p_db: pointer to the attribute database.
+**                  op_code:op code of this write.
+**                  handle: handle of the attribute to write.
+**                  offset: Write offset if write op code is write blob.
+**                  p_data: Attribute value to write.
+**                  len: attribute data length.
+**                  sec_flag: current link security status.
+**                  key_size: encryption key size
+**
+** Returns          Status of the operation.
+**
+*******************************************************************************/
+tGATT_STATUS gatts_write_attr_perm_check (tGATT_SVC_DB *p_db, UINT8 op_code,
+                                          UINT16 handle, UINT16 offset, UINT8 *p_data,
+                                          UINT16 len, tGATT_SEC_FLAG sec_flag, UINT8 key_size)
+{
+    tGATT_STATUS    status = GATT_NOT_FOUND;
+    tGATT_ATTR16    *p_attr;
+    UINT16          max_size = 0;
+    tGATT_PERM      perm;
+    UINT16          min_key_size;
+
+    GATT_TRACE_DEBUG6( "gatts_write_attr_perm_check op_code=0x%0x handle=0x%04x offset=%d len=%d sec_flag=0x%0x key_size=%d",
+                       op_code, handle, offset, len, sec_flag, key_size);
+
+    if (p_db != NULL)
+    {
+        p_attr = (tGATT_ATTR16 *) p_db->p_attr_list;
+
+        while (p_attr != NULL)
+        {
+            if (p_attr->handle == handle)
+            {
+                perm = p_attr->permission;
+                min_key_size = (((perm & GATT_ENCRYPT_KEY_SIZE_MASK) >> 12));
+                if (min_key_size != 0 )
+                {
+                    min_key_size +=6;
+                }
+                GATT_TRACE_DEBUG2( "gatts_write_attr_perm_check p_attr->permission =0x%04x min_key_size==0x%04x",
+                                   p_attr->permission,
+                                   min_key_size);
+
+                if ((op_code == GATT_CMD_WRITE) && (perm & GATT_WRITE_SIGNED_PERM) )
+                {
+                    /* use the rules for the mixed security see section 10.2.3*/
+                    if (perm & GATT_PERM_WRITE_SIGNED)
+                    {
+                        perm = GATT_PERM_WRITE_ENCRYPTED;
+                    }
+                    else
+                    {
+                        perm = GATT_PERM_WRITE_ENC_MITM;
+                    }
+                }
+
+                if ((op_code == GATT_SIGN_CMD_WRITE) && !(perm & GATT_WRITE_SIGNED_PERM))
+                {
+                    status = GATT_WRITE_NOT_PERMIT;
+                    GATT_TRACE_DEBUG0( "gatts_write_attr_perm_check - sign cmd write not allowed");
+                }
+                 if ((op_code == GATT_SIGN_CMD_WRITE) && (sec_flag & GATT_SEC_FLAG_ENCRYPTED))
+                {
+                    status = GATT_INVALID_PDU;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - Error!! sign cmd write sent on a encypted link");
+                }
+                else if (!(perm & GATT_WRITE_ALLOWED))
+                {
+                    status = GATT_WRITE_NOT_PERMIT;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_WRITE_NOT_PERMIT");
+                }
+                else if ((perm & GATT_WRITE_AUTH_REQUIRED ) && !(sec_flag & GATT_SEC_FLAG_LKEY_UNAUTHED))
+                {
+                    status = GATT_INSUF_AUTHENTICATION;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_INSUF_AUTHENTICATION");
+                }
+                else if ((perm & GATT_WRITE_MITM_REQUIRED ) && !(sec_flag & GATT_SEC_FLAG_LKEY_AUTHED))
+                {
+                    status = GATT_INSUF_AUTHENTICATION;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_INSUF_AUTHENTICATION: MITM required");
+                }
+                else if ((perm & GATT_WRITE_ENCRYPTED_PERM ) && !(sec_flag & GATT_SEC_FLAG_ENCRYPTED))
+                {
+                    status = GATT_INSUF_ENCRYPTION;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_INSUF_ENCRYPTION");
+                }
+                else if ((perm & GATT_WRITE_ENCRYPTED_PERM ) && (sec_flag & GATT_SEC_FLAG_ENCRYPTED) && (key_size < min_key_size))
+                {
+                    status = GATT_INSUF_KEY_SIZE;
+                    GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_INSUF_KEY_SIZE");
+                }
+                else /* writable: must be char value declaration or char descritpors */
+                {
+                    if(p_attr->uuid_type == GATT_ATTR_UUID_TYPE_16)
+                    {
+                    switch (p_attr->uuid)
+                    {
+                        case GATT_UUID_CHAR_PRESENT_FORMAT:/* should be readable only */
+                        case GATT_UUID_CHAR_EXT_PROP:/* should be readable only */
+                        case GATT_UUID_CHAR_AGG_FORMAT: /* should be readable only */
+                            case GATT_UUID_CHAR_VALID_RANGE:
+                            status = GATT_WRITE_NOT_PERMIT;
+                            break;
+
+                        case GATT_UUID_CHAR_CLIENT_CONFIG:
+                        case GATT_UUID_CHAR_SRVR_CONFIG:
+                            max_size = 2;
+                        case GATT_UUID_CHAR_DESCRIPTION:
+                        default: /* any other must be character value declaration */
+                            status = GATT_SUCCESS;
+                            break;
+                        }
+                    }
+                    else if (p_attr->uuid_type == GATT_ATTR_UUID_TYPE_128)
+                    {
+                         status = GATT_SUCCESS;
+                    }
+                    else
+                    {
+                        status = GATT_INVALID_PDU;
+                    }
+
+                    if (p_data == NULL && len  > 0)
+                    {
+                        status = GATT_INVALID_PDU;
+                    }
+                    /* these attribute does not allow write blob */
+// btla-specific ++
+                    else if ( (p_attr->uuid_type == GATT_ATTR_UUID_TYPE_16) &&
+                              (p_attr->uuid == GATT_UUID_CHAR_CLIENT_CONFIG ||
+                               p_attr->uuid == GATT_UUID_CHAR_SRVR_CONFIG) )
+// btla-specific --
+                    {
+                        if (op_code == GATT_REQ_PREPARE_WRITE && offset != 0) /* does not allow write blob */
+                        {
+                            status = GATT_NOT_LONG;
+                            GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_NOT_LONG");
+                        }
+                        else if (len != max_size)    /* data does not match the required format */
+                        {
+                            status = GATT_INVALID_PDU;
+                            GATT_TRACE_ERROR0( "gatts_write_attr_perm_check - GATT_INVALID_PDU");
+                        }
+                        else
+                        {
+                            status = GATT_SUCCESS;
+                        }
+                    }
+                }
+                break;
+            }
+            else
+                p_attr = (tGATT_ATTR16 *)p_attr->p_next;
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         allocate_attr_in_db
+**
+** Description      Allocate a memory space for a new attribute, and link this
+**                  attribute into the database attribute list.
+**
+**
+** Parameter        p_db    : database pointer.
+**                  service : type of attribute to be added.
+**
+** Returns          pointer to the newly allocated attribute.
+**
+*******************************************************************************/
+static void *allocate_attr_in_db(tGATT_SVC_DB *p_db, UINT16 uuid16, UINT8 *uuid128, tGATT_PERM perm)
+{
+    tGATT_ATTR16    *p_attr16 = NULL, *p_last;
+    tGATT_ATTR128   *p_attr128 = NULL;
+    UINT16      len = (uuid16 == 0) ? sizeof(tGATT_ATTR128): sizeof(tGATT_ATTR16);
+
+    GATT_TRACE_DEBUG1("allocate attr %d bytes ",len);
+
+    if (uuid16 == GATT_ILLEGAL_UUID && uuid128 == NULL)
+    {
+        GATT_TRACE_ERROR0("illegal UUID");
+        return NULL;
+    }
+
+    if (p_db->end_handle <= p_db->next_handle)
+    {
+        GATT_TRACE_DEBUG2("handle space full. handle_max = %d next_handle = %d",
+                          p_db->end_handle, p_db->next_handle);
+        return NULL;
+    }
+
+    if (p_db->mem_free < len)
+    {
+        if (!allocate_svc_db_buf(p_db))
+        {
+            GATT_TRACE_ERROR0("allocate_attr_in_db failed, no resources");
+            return NULL;
+        }
+    }
+
+    p_attr16 = (tGATT_ATTR16 *) p_db->p_free_mem;
+    p_attr128 = (tGATT_ATTR128 *) p_db->p_free_mem;
+
+    memset(p_attr16, 0, len);
+
+    if (uuid16 != GATT_ILLEGAL_UUID)
+    {
+        p_attr16->uuid_type = GATT_ATTR_UUID_TYPE_16;
+        p_attr16->uuid = uuid16;
+    }
+    else
+    {
+        p_attr128->uuid_type = GATT_ATTR_UUID_TYPE_128;
+        memcpy(p_attr128->uuid, uuid128, LEN_UUID_128);
+    }
+
+    p_db->p_free_mem += len;
+    p_db->mem_free -= len;
+
+    p_attr16->handle = p_db->next_handle++;
+    p_attr16->permission = perm;
+    p_attr16->p_next = NULL;
+
+    /* link the attribute record into the end of DB */
+    if (p_db->p_attr_list == NULL)
+        p_db->p_attr_list = p_attr16;
+    else
+    {
+        p_last = (tGATT_ATTR16 *)p_db->p_attr_list;
+
+        while (p_last != NULL && p_last->p_next != NULL)
+            p_last = (tGATT_ATTR16 *)p_last->p_next;
+
+        p_last->p_next = p_attr16;
+    }
+
+    if (p_attr16->uuid_type == GATT_ATTR_UUID_TYPE_16)
+    {
+        GATT_TRACE_DEBUG3("=====> handle = [0x%04x] uuid = [0x%04x] perm=0x%02x ",
+                          p_attr16->handle, p_attr16->uuid, p_attr16->permission);
+    }
+    else
+    {
+        GATT_TRACE_DEBUG4("=====> handle = [0x%04x] uuid128 = [0x%02x:0x%02x] perm=0x%02x ",
+                          p_attr128->handle, p_attr128->uuid[0],p_attr128->uuid[1],
+                          p_attr128->permission);
+    }
+    return(void *)p_attr16;
+}
+
+/*******************************************************************************
+**
+** Function         deallocate_attr_in_db
+**
+** Description      Free an attribute within the database.
+**
+** Parameter        p_db: database pointer.
+**                  p_attr: pointer to the attribute record to be freed.
+**
+** Returns          BOOLEAN: success
+**
+*******************************************************************************/
+static BOOLEAN deallocate_attr_in_db(tGATT_SVC_DB *p_db, void *p_attr)
+{
+    tGATT_ATTR16  *p_cur, *p_next;
+    BOOLEAN     found = FALSE;
+
+    if (p_db->p_attr_list == NULL)
+        return found;
+
+    p_cur   = (tGATT_ATTR16 *) p_db->p_attr_list;
+    p_next  = (tGATT_ATTR16 *) p_cur->p_next;
+
+    for (; p_cur != NULL && p_next != NULL;
+        p_cur = p_next, p_next = (tGATT_ATTR16 *)p_next->p_next)
+    {
+        if (p_next == p_attr)
+        {
+            p_cur->p_next = p_next->p_next;
+            found = TRUE;
+        }
+    }
+    if (p_cur == p_attr && p_cur == p_db->p_attr_list)
+    {
+        p_db->p_attr_list = p_cur->p_next;
+        found = TRUE;
+    }
+    /* else attr not found */
+    if ( found)
+        p_db->next_handle --;
+
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function         copy_extra_byte_in_db
+**
+** Description      Utility function to allocate extra bytes memory in DB and copy
+**                  the value from a source place.
+**
+**
+** Parameter        p_db: database pointer.
+**                  p_dst: destination data pointer.
+**                  p_src: source data pointer.
+**                  len: data length to be copied.
+**
+** Returns          None.
+**
+*******************************************************************************/
+static BOOLEAN copy_extra_byte_in_db(tGATT_SVC_DB *p_db, void **p_dst, UINT16 len)
+{
+    UINT8 *p = (UINT8 *)*p_dst;
+
+    if (p_db->mem_free < len)
+    {
+        if (!allocate_svc_db_buf(p_db))
+        {
+            GATT_TRACE_ERROR0("copy_extra_byte_in_db failed, no resources");
+            return FALSE;
+        }
+    }
+
+    p = p_db->p_free_mem;
+    p_db->p_free_mem += len;
+    p_db->mem_free -= len;
+    memset((void *)p, 0, len);
+    *p_dst = (void *)p;
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         allocate_svc_db_buf
+**
+** Description      Utility function to allocate extra buffer for service database.
+**
+** Returns          TRUE if allocation succeed, otherwise FALSE.
+**
+*******************************************************************************/
+static BOOLEAN allocate_svc_db_buf(tGATT_SVC_DB *p_db)
+{
+    BT_HDR  *p_buf;
+
+    GATT_TRACE_DEBUG0("allocate_svc_db_buf allocating extra buffer");
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf(GATT_DB_POOL_ID)) == NULL)
+    {
+        GATT_TRACE_ERROR0("allocate_svc_db_buf failed, no resources");
+        return FALSE;
+    }
+
+    memset(p_buf, 0, GKI_get_buf_size(p_buf));
+    p_db->p_free_mem    = (UINT8 *) p_buf;
+    p_db->mem_free      = GKI_get_buf_size(p_buf);
+
+    GKI_enqueue(&p_db->svc_buffer, p_buf);
+
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_send_app_read_request
+**
+** Description      Send application read request callback
+**
+** Returns          status of operation.
+**
+*******************************************************************************/
+static tGATT_STATUS gatts_send_app_read_request(tGATT_TCB *p_tcb, UINT8 op_code,
+                                                UINT16 handle, UINT16 offset, UINT32 trans_id)
+{
+    tGATTS_DATA   sr_data;
+    UINT8       i_rcb;
+    tGATT_SR_REG *p_sreg;
+    UINT16   conn_id;
+
+    i_rcb = gatt_sr_find_i_rcb_by_handle(handle);
+    p_sreg = &gatt_cb.sr_reg[i_rcb];
+    conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_sreg->gatt_if);
+
+    if (trans_id == 0)
+    {
+        trans_id = gatt_sr_enqueue_cmd(p_tcb, op_code, handle);
+        gatt_sr_update_cback_cnt(p_tcb, p_sreg->gatt_if, TRUE, TRUE);
+    }
+
+    if (trans_id != 0 )
+    {
+        memset(&sr_data, 0, sizeof(tGATTS_DATA));
+
+        sr_data.read_req.handle = handle;
+        sr_data.read_req.is_long = (BOOLEAN)(op_code == GATT_REQ_READ_BLOB);
+        sr_data.read_req.offset = offset;
+
+        gatt_sr_send_req_callback(conn_id,
+                                  trans_id, GATTS_REQ_TYPE_READ, &sr_data);
+        return(tGATT_STATUS) GATT_PENDING;
+    }
+    else
+        return(tGATT_STATUS) GATT_BUSY; /* max pending command, application error */
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_db_add_service_declaration
+**
+** Description      Update a service database service declaration record.
+**
+** Parameter        p_db: database pointer.
+**                  service: UUID of the service.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_db_add_service_declaration(tGATT_SVC_DB *p_db, tBT_UUID service, BOOLEAN is_pri)
+{
+    tGATT_ATTR16  *p_attr;
+    UINT16      service_type = is_pri ? GATT_UUID_PRI_SERVICE: GATT_UUID_SEC_SERVICE;
+
+    GATT_TRACE_DEBUG0( "add_service_declaration");
+
+    /* add service declration record */
+    if ((p_attr = (tGATT_ATTR16 *)(allocate_attr_in_db(p_db, service_type, NULL, GATT_PERM_READ))) != NULL)
+    {
+        if (copy_extra_byte_in_db (p_db, (void **)&p_attr->p_value, sizeof(tBT_UUID)))
+        {
+            memcpy (&p_attr->p_value->uuid, &service, sizeof(tBT_UUID));
+        }
+    }
+}
+
+#endif /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_int.h b/stack/gatt/gatt_int.h
new file mode 100644
index 0000000..44a2bc1
--- /dev/null
+++ b/stack/gatt/gatt_int.h
@@ -0,0 +1,671 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef  GATT_INT_H
+#define  GATT_INT_H
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+
+
+#include "bt_trace.h"
+#include "gatt_api.h"
+#include "btm_ble_api.h"
+#include "btu.h"
+
+#include <string.h>
+
+
+#define GATT_CREATE_CONN_ID(tcb_idx, gatt_if)  ((UINT16) ((((UINT8)(tcb_idx) ) << 8) | ((UINT8) (gatt_if))))
+#define GATT_GET_TCB_IDX(conn_id)  ((UINT8) (((UINT16) (conn_id)) >> 8))
+#define GATT_GET_GATT_IF(conn_id)  ((tGATT_IF)((UINT8) (conn_id)))
+
+#define GATT_GET_SR_REG_PTR(index) (&gatt_cb.sr_reg[(UINT8) (index)]);
+#define GATT_TRANS_ID_MAX                   0x0fffffff      /* 4 MSB is reserved */
+
+/* security action for GATT write and read request */
+#define GATT_SEC_NONE              0
+#define GATT_SEC_OK                1
+#define GATT_SEC_ENCRYPT           2    /* encrypt the link with current key */
+#define GATT_SEC_ENCRYPT_NO_MITM   3    /* unauthenticated encryption or better */
+#define GATT_SEC_ENCRYPT_MITM      4    /* authenticated encryption */
+#define GATT_SEC_SIGN_DATA         5   /* compute the signature for the write cmd */
+typedef UINT8 tGATT_SEC_ACTION;
+
+
+#define GATT_ATTR_OP_SPT_MTU               (0x00000001 << 0)
+#define GATT_ATTR_OP_SPT_FIND_INFO         (0x00000001 << 1)
+#define GATT_ATTR_OP_SPT_FIND_BY_TYPE      (0x00000001 << 2)
+#define GATT_ATTR_OP_SPT_READ_BY_TYPE      (0x00000001 << 3)
+#define GATT_ATTR_OP_SPT_READ              (0x00000001 << 4)
+#define GATT_ATTR_OP_SPT_MULT_READ         (0x00000001 << 5)
+#define GATT_ATTR_OP_SPT_READ_BLOB         (0x00000001 << 6)
+#define GATT_ATTR_OP_SPT_READ_BY_GRP_TYPE  (0x00000001 << 7)
+#define GATT_ATTR_OP_SPT_WRITE             (0x00000001 << 8)
+#define GATT_ATTR_OP_SPT_WRITE_CMD         (0x00000001 << 9)
+#define GATT_ATTR_OP_SPT_PREP_WRITE        (0x00000001 << 10)
+#define GATT_ATTR_OP_SPT_EXE_WRITE         (0x00000001 << 11)
+#define GATT_ATTR_OP_SPT_HDL_VALUE_CONF    (0x00000001 << 12)
+#define GATT_ATTR_OP_SP_SIGN_WRITE        (0x00000001 << 13)
+
+#define GATT_INDEX_INVALID  0xff
+
+#define GATT_PENDING_REQ_NONE    0
+
+
+#define GATT_WRITE_CMD_MASK  0xc0  /*0x1100-0000*/
+#define GATT_AUTH_SIGN_MASK  0x80  /*0x1000-0000*/
+#define GATT_AUTH_SIGN_LEN   12
+
+#define GATT_HDR_SIZE           3 /* 1B opcode + 2B handle */
+
+/* wait for ATT cmd response timeout value */
+#define GATT_WAIT_FOR_RSP_TOUT       30
+
+/* characteristic descriptor type */
+#define GATT_DESCR_EXT_DSCPTOR   1    /* Characteristic Extended Properties */
+#define GATT_DESCR_USER_DSCPTOR  2    /* Characteristic User Description    */
+#define GATT_DESCR_CLT_CONFIG    3    /* Client Characteristic Configuration */
+#define GATT_DESCR_SVR_CONFIG    4    /* Server Characteristic Configuration */
+#define GATT_DESCR_PRES_FORMAT   5    /* Characteristic Presentation Format */
+#define GATT_DESCR_AGGR_FORMAT   6    /* Characteristic Aggregate Format */
+#define GATT_DESCR_VALID_RANGE   7    /* Characteristic Valid Range */
+#define GATT_DESCR_UNKNOWN       0xff
+
+#define GATT_SEC_FLAG_LKEY_UNAUTHED     BTM_SEC_FLAG_LKEY_KNOWN
+#define GATT_SEC_FLAG_LKEY_AUTHED       BTM_SEC_FLAG_LKEY_AUTHED
+#define GATT_SEC_FLAG_ENCRYPTED         BTM_SEC_FLAG_ENCRYPTED
+typedef UINT8 tGATT_SEC_FLAG;
+
+/* Find Information Response Type
+*/
+#define GATT_INFO_TYPE_PAIR_16      0x01
+#define GATT_INFO_TYPE_PAIR_128     0x02
+
+/*  GATT client FIND_TYPE_VALUE_Request data */
+typedef struct
+{
+    tBT_UUID        uuid;           /* type of attribute to be found */
+    UINT16          s_handle;       /* starting handle */
+    UINT16          e_handle;       /* ending handle */
+    UINT16          value_len;      /* length of the attribute value */
+    UINT8           value[GATT_MAX_MTU_SIZE];       /* pointer to the attribute value to be found */
+} tGATT_FIND_TYPE_VALUE;
+
+/* client request message to ATT protocol
+*/
+typedef union
+{
+    tGATT_READ_BY_TYPE      browse;     /* read by type request */
+    tGATT_FIND_TYPE_VALUE   find_type_value;/* find by type value */
+    tGATT_READ_MULTI        read_multi;   /* read multiple request */
+    tGATT_READ_PARTIAL      read_blob;    /* read blob */
+    tGATT_VALUE             attr_value;   /* write request */
+                                          /* prepare write */
+    /* write blob */
+    UINT16                  handle;        /* read,  handle value confirmation */
+    UINT16                  mtu;
+    tGATT_EXEC_FLAG         exec_write;    /* execute write */
+}tGATT_CL_MSG;
+
+/* error response strucutre */
+typedef struct
+{
+    UINT16  handle;
+    UINT8   cmd_code;
+    UINT8   reason;
+}tGATT_ERROR;
+
+/* server response message to ATT protocol
+*/
+typedef union
+{
+    /* data type            member          event   */
+    tGATT_VALUE             attr_value;     /* READ, HANDLE_VALUE_IND, PREPARE_WRITE */
+                                            /* READ_BLOB, READ_BY_TYPE */
+    tGATT_ERROR             error;          /* ERROR_RSP */
+    UINT16                  handle;         /* WRITE, WRITE_BLOB */
+    UINT16                  mtu;            /* exchange MTU request */
+} tGATT_SR_MSG;
+
+/* Characteristic declaration attribute value
+*/
+typedef struct
+{
+    tGATT_CHAR_PROP             property;
+    UINT16                      char_val_handle;
+} tGATT_CHAR_DECL;
+
+/* attribute value maintained in the server database
+*/
+typedef union
+{
+    tBT_UUID                uuid;               /* service declaration */
+    tGATT_CHAR_DECL         char_decl;          /* characteristic declaration */
+    tGATT_INCL_SRVC         incl_handle;        /* included service */
+
+} tGATT_ATTR_VALUE;
+
+/* Attribute UUID type
+*/
+#define GATT_ATTR_UUID_TYPE_16      0
+#define GATT_ATTR_UUID_TYPE_128     1
+typedef UINT8   tGATT_ATTR_UUID_TYPE;
+
+/* 16 bits UUID Attribute in server database
+*/
+typedef struct
+{
+    void                                *p_next;  /* pointer to the next attribute,
+                                                    either tGATT_ATTR16 or tGATT_ATTR128 */
+    tGATT_ATTR_VALUE                    *p_value;
+    tGATT_ATTR_UUID_TYPE                uuid_type;
+    tGATT_PERM                          permission;
+    UINT16                              handle;
+    UINT16                              uuid;
+} tGATT_ATTR16;
+
+/* 128 bits UUID Attribute in server database
+*/
+typedef struct
+{
+    void                                *p_next;  /* pointer to the next attribute,
+                                                    either tGATT_ATTR16 or tGATT_ATTR128 */
+    tGATT_ATTR_VALUE                    *p_value;
+    tGATT_ATTR_UUID_TYPE                uuid_type;
+    tGATT_PERM                          permission;
+    UINT16                              handle;
+    UINT8                               uuid[LEN_UUID_128];
+} tGATT_ATTR128;
+
+/* Service Database definition
+*/
+typedef struct
+{
+    void            *p_attr_list;               /* pointer to the first attribute,
+                                                  either tGATT_ATTR16 or tGATT_ATTR128 */
+    UINT8           *p_free_mem;                /* Pointer to free memory       */
+    BUFFER_Q        svc_buffer;                 /* buffer queue used for service database */
+    UINT32          mem_free;                   /* Memory still available       */
+    UINT16          end_handle;                 /* Last handle number           */
+    UINT16          next_handle;                /* Next usable handle value     */
+} tGATT_SVC_DB;
+
+/* Data Structure used for GATT server                                        */
+/* A GATT registration record consists of a handle, and 1 or more attributes  */
+/* A service registration information record consists of beginning and ending */
+/* attribute handle, service UUID and a set of GATT server callback.          */
+typedef struct
+{
+    tGATT_SVC_DB    *p_db;      /* pointer to the service database */
+    //tGATT_SR_CBACK  sr_cb;      /* server callback functions */
+    tBT_UUID        app_uuid;           /* applicatino UUID */
+    UINT32          sdp_handle; /* primamry service SDP handle */
+    UINT16          service_instance;   /* service instance number */
+    UINT16          type;       /* service type UUID, primary or secondary */
+    UINT16          s_hdl;      /* service starting handle */
+    UINT16          e_hdl;      /* service ending handle */
+    tGATT_IF        gatt_if;    /* this service is belong to which application */
+    BOOLEAN         in_use;
+} tGATT_SR_REG;
+
+
+/* Data Structure used for GATT server */
+/* An GATT registration record consists of a handle, and 1 or more attributes */
+/* A service registration information record consists of beginning and ending */
+/* attribute handle, service UUID and a set of GATT server callback.          */
+
+typedef struct
+{
+    tBT_UUID     app_uuid128;
+    tGATT_CBACK  app_cb;
+    tGATT_IF     gatt_if; /* one based */
+    BOOLEAN      in_use;
+} tGATT_REG;
+
+
+
+
+/* command queue for each connection */
+typedef struct
+{
+    BT_HDR      *p_cmd;
+    UINT16      clcb_idx;
+    UINT8       op_code;
+    BOOLEAN     to_send;
+}tGATT_CMD_Q;
+
+
+#if GATT_MAX_SR_PROFILES <= 8
+typedef UINT8 tGATT_APP_MASK;
+#elif GATT_MAX_SR_PROFILES <= 16
+typedef UINT16 tGATT_APP_MASK;
+#elif GATT_MAX_SR_PROFILES <= 32
+typedef UINT32 tGATT_APP_MASK;
+#endif
+
+/* command details for each connection */
+typedef struct
+{
+    BT_HDR          *p_rsp_msg;
+    UINT32           trans_id;
+    tGATT_READ_MULTI multi_req;
+    BUFFER_Q         multi_rsp_q;
+    UINT16           handle;
+    UINT8            op_code;
+    UINT8            status;
+    UINT8            cback_cnt[GATT_MAX_APPS];
+} tGATT_SR_CMD;
+
+#define     GATT_CH_CLOSE               0
+#define     GATT_CH_CLOSING             1
+#define     GATT_CH_CONN                2
+#define     GATT_CH_CFG                 3
+#define     GATT_CH_OPEN                4
+#define     GATT_CH_W4_SEC_COMP         5
+#define     GATT_CH_W4_DATA_SIGN_COMP   6
+
+typedef UINT8 tGATT_CH_STATE;
+
+#define GATT_GATT_START_HANDLE  1
+#define GATT_GAP_START_HANDLE   20
+#define GATT_APP_START_HANDLE   40
+
+typedef struct hdl_cfg
+{
+    UINT16               gatt_start_hdl;
+    UINT16               gap_start_hdl;
+    UINT16               app_start_hdl;
+}tGATT_HDL_CFG;
+
+typedef struct hdl_list_elem
+{
+    struct              hdl_list_elem *p_next;
+    struct              hdl_list_elem *p_prev;
+    tGATTS_HNDL_RANGE   asgn_range; /* assigned handle range */
+    tGATT_SVC_DB        svc_db;
+    BOOLEAN             in_use;
+}tGATT_HDL_LIST_ELEM;
+
+typedef struct
+{
+    tGATT_HDL_LIST_ELEM  *p_first;
+    tGATT_HDL_LIST_ELEM  *p_last;
+    UINT16               count;
+}tGATT_HDL_LIST_INFO;
+
+
+typedef struct srv_list_elem
+{
+    struct              srv_list_elem *p_next;
+    struct              srv_list_elem *p_prev;
+    UINT16              s_hdl;
+    UINT8               i_sreg;
+    BOOLEAN             in_use;
+    BOOLEAN             is_primary;
+}tGATT_SRV_LIST_ELEM;
+
+
+typedef struct
+{
+    tGATT_SRV_LIST_ELEM  *p_last_primary;
+    tGATT_SRV_LIST_ELEM  *p_first;
+    tGATT_SRV_LIST_ELEM  *p_last;
+    UINT16               count;
+}tGATT_SRV_LIST_INFO;
+
+typedef struct
+{
+    void            *p_clcb;            /* which clcb is doing encryption */
+    tGATT_SEC_ACTION sec_act;
+    BD_ADDR         peer_bda;
+    UINT32          trans_id;
+
+    UINT16          att_lcid;           /* L2CAP channel ID for ATT */
+    UINT16          payload_size;
+
+    tGATT_CH_STATE  ch_state;
+    UINT8           ch_flags;
+
+    tGATT_IF         app_hold_link[GATT_MAX_APPS];
+
+    /* server needs */
+    /* server response data */
+    tGATT_SR_CMD    sr_cmd;
+    UINT16          indicate_handle;
+    BUFFER_Q        pending_ind_q;
+
+    TIMER_LIST_ENT  conf_timer_ent;     /* peer confirm to indication timer */
+
+    UINT8            prep_cnt[GATT_MAX_APPS];
+    UINT8            ind_count;
+
+    tGATT_CMD_Q       cl_cmd_q[GATT_CL_MAX_LCB];
+    TIMER_LIST_ENT    rsp_timer_ent;        /* peer response timer */
+    TIMER_LIST_ENT    ind_ack_timer_ent;    /* local app confirm to indication timer */
+    UINT8             pending_cl_req;
+    UINT8             next_slot_inq;    /* index of next available slot in queue */
+
+    BOOLEAN         in_use;
+    UINT8           tcb_idx;
+} tGATT_TCB;
+
+/* logic channel */
+typedef struct
+{
+    UINT16                  next_disc_start_hdl;   /* starting handle for the next inc srvv discovery */
+    tGATT_DISC_RES          result;
+    BOOLEAN                 wait_for_read_rsp;
+} tGATT_READ_INC_UUID128;
+typedef struct
+{
+    tGATT_TCB               *p_tcb;         /* associated TCB of this CLCB */
+    tGATT_REG               *p_reg;        /* owner of this CLCB */
+    UINT8                   sccb_idx;
+    UINT8                   *p_attr_buf;    /* attribute buffer for read multiple, prepare write */
+    tBT_UUID                uuid;
+    UINT16                  conn_id;        /* connection handle */
+    UINT16                  clcb_idx;
+    UINT16                  s_handle;       /* starting handle of the active request */
+    UINT16                  e_handle;       /* ending handle of the active request */
+    UINT16                  counter;        /* used as offset, attribute length, num of prepare write */
+    UINT16                  start_offset;
+    tGATT_AUTH_REQ          auth_req;       /* authentication requirement */
+    UINT8                   operation;      /* one logic channel can have one operation active */
+    UINT8                   op_subtype;     /* operation subtype */
+    UINT8                   status;         /* operation status */
+    BOOLEAN                 first_read_blob_after_read;
+    tGATT_READ_INC_UUID128  read_uuid128;
+    BOOLEAN                 in_use;
+} tGATT_CLCB;
+
+#define GATT_SIGN_WRITE             1
+#define GATT_VERIFY_SIGN_DATA       2
+
+typedef struct
+{
+    BT_HDR      hdr;
+    tGATT_CLCB  *p_clcb;
+}tGATT_SIGN_WRITE_OP;
+
+typedef struct
+{
+    BT_HDR      hdr;
+    tGATT_TCB   *p_tcb;
+    BT_HDR      *p_data;
+
+}tGATT_VERIFY_SIGN_OP;
+
+
+typedef struct
+{
+    UINT16                  clcb_idx;
+    BOOLEAN                 in_use;
+} tGATT_SCCB;
+
+typedef struct
+{
+    UINT16      handle;
+    UINT16      uuid;
+    UINT32      service_change;
+}tGATT_SVC_CHG;
+
+typedef struct
+{
+    tGATT_IF        gatt_if[GATT_MAX_APPS];
+    BD_ADDR         remote_bda;
+    BOOLEAN         in_use;
+}tGATT_BG_CONN_DEV;
+
+
+typedef struct
+{
+    UINT16  conn_id;
+    BOOLEAN in_use;
+    BOOLEAN connected;
+    BD_ADDR bda;
+}tGATT_PROFILE_CLCB;
+
+typedef struct
+{
+    tGATT_TCB           tcb[GATT_MAX_PHY_CHANNEL];
+    BUFFER_Q            sign_op_queue;
+
+    tGATT_SR_REG        sr_reg[GATT_MAX_SR_PROFILES];
+    UINT16              next_handle;    /* next available handle */
+    tGATT_SVC_CHG       gattp_attr;     /* GATT profile attribute service change */
+    tGATT_IF            gatt_if;
+    tGATT_HDL_LIST_INFO hdl_list_info;
+    tGATT_HDL_LIST_ELEM hdl_list[GATT_MAX_SR_PROFILES];
+    tGATT_SRV_LIST_INFO srv_list_info;
+    tGATT_SRV_LIST_ELEM srv_list[GATT_MAX_SR_PROFILES];
+
+    BUFFER_Q            srv_chg_clt_q;   /* service change clients queue */
+    BUFFER_Q            pending_new_srv_start_q; /* pending new service start queue */
+    tGATT_REG           cl_rcb[GATT_MAX_APPS];
+    tGATT_CLCB          clcb[GATT_CL_MAX_LCB];  /* connection link control block*/
+    tGATT_SCCB          sccb[GATT_MAX_SCCB];    /* sign complete callback function GATT_MAX_SCCB <= GATT_CL_MAX_LCB */
+    UINT8               trace_level;
+    UINT16              def_mtu_size;
+
+#if GATT_CONFORMANCE_TESTING == TRUE
+    BOOLEAN             enable_err_rsp;
+    UINT8               req_op_code;
+    UINT8               err_status;
+#endif
+
+    tGATT_PROFILE_CLCB  profile_clcb[GATT_MAX_APPS];
+    UINT16              handle_of_h_r;          /* Handle of the handles reused characteristic value */
+
+    tGATT_APPL_INFO       cb_info;
+
+
+
+    tGATT_HDL_CFG           hdl_cfg;
+    tGATT_BG_CONN_DEV       bgconn_dev[GATT_MAX_BG_CONN_DEV];
+
+} tGATT_CB;
+
+
+#define GATT_SIZE_OF_SRV_CHG_HNDL_RANGE 4
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Global GATT data */
+#if GATT_DYNAMIC_MEMORY == FALSE
+GATT_API extern tGATT_CB  gatt_cb;
+#else
+GATT_API extern tGATT_CB *gatt_cb_ptr;
+#define gatt_cb (*gatt_cb_ptr)
+#endif
+
+#if GATT_CONFORMANCE_TESTING == TRUE
+GATT_API extern void gatt_set_err_rsp(BOOLEAN enable, UINT8 req_op_code, UINT8 err_status);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* internal functions */
+extern void gatt_init (void);
+
+/* from gatt_main.c */
+extern BOOLEAN gatt_disconnect (BD_ADDR rem_bda);
+extern BOOLEAN gatt_act_connect (tGATT_REG *p_reg, BD_ADDR bd_addr);
+extern BOOLEAN gatt_connect (BD_ADDR rem_bda,  tGATT_TCB *p_tcb);
+extern void gatt_data_process (tGATT_TCB *p_tcb, BT_HDR *p_buf);
+extern void gatt_update_app_use_link_flag ( tGATT_IF gatt_if, tGATT_TCB *p_tcb, BOOLEAN is_add, BOOLEAN check_acl_link);
+
+extern void gatt_profile_db_init(void);
+extern void gatt_set_ch_state(tGATT_TCB *p_tcb, tGATT_CH_STATE ch_state);
+extern tGATT_CH_STATE gatt_get_ch_state(tGATT_TCB *p_tcb);
+extern void gatt_init_srv_chg(void);
+extern void gatt_proc_srv_chg (void);
+extern void gatt_send_srv_chg_ind (BD_ADDR peer_bda);
+extern void gatt_chk_srv_chg(tGATTS_SRV_CHG *p_srv_chg_clt);
+extern void gatt_add_a_bonded_dev_for_srv_chg (BD_ADDR bda);
+
+/* from gatt_attr.c */
+extern UINT16 gatt_profile_find_conn_id_by_bd_addr(BD_ADDR bda);
+extern tGATT_PROFILE_CLCB *gatt_profile_find_clcb_by_bd_addr(BD_ADDR bda);
+extern BOOLEAN gatt_profile_clcb_dealloc (UINT16 conn_id);
+extern tGATT_PROFILE_CLCB *gatt_profile_clcb_alloc (UINT16 conn_id, BD_ADDR bda);
+
+
+/* Functions provided by att_protocol.c */
+extern tGATT_STATUS attp_send_cl_msg (tGATT_TCB *p_tcb, UINT16 clcb_idx, UINT8 op_code, tGATT_CL_MSG *p_msg);
+extern BT_HDR *attp_build_sr_msg(tGATT_TCB *p_tcb, UINT8 op_code, tGATT_SR_MSG *p_msg);
+extern tGATT_STATUS attp_send_sr_msg (tGATT_TCB *p_tcb, BT_HDR *p_msg);
+extern BOOLEAN  attp_send_msg_to_L2CAP(tGATT_TCB *p_tcb, BT_HDR *p_toL2CAP);
+
+/* utility functions */
+extern UINT8 * gatt_dbg_op_name(UINT8 op_code);
+extern UINT32 gatt_add_sdp_record (tBT_UUID *p_uuid, UINT16 start_hdl, UINT16 end_hdl);
+extern BOOLEAN gatt_parse_uuid_from_cmd(tBT_UUID *p_uuid, UINT16 len, UINT8 **p_data);
+extern UINT8 gatt_build_uuid_to_stream(UINT8 **p_dst, tBT_UUID uuid);
+extern BOOLEAN gatt_uuid_compare(tBT_UUID src, tBT_UUID tar);
+extern void gatt_sr_get_sec_info(BD_ADDR rem_bda, BOOLEAN le_conn, UINT8 *p_sec_flag, UINT8 *p_key_size);
+extern void gatt_start_rsp_timer(tGATT_TCB    *p_tcb);
+extern void gatt_start_conf_timer(tGATT_TCB    *p_tcb);
+extern void gatt_rsp_timeout(TIMER_LIST_ENT *p_tle);
+extern void gatt_ind_ack_timeout(TIMER_LIST_ENT *p_tle);
+extern void gatt_start_ind_ack_timer(tGATT_TCB *p_tcb);
+extern tGATT_STATUS gatt_send_error_rsp(tGATT_TCB *p_tcb, UINT8 err_code, UINT8 op_code, UINT16 handle, BOOLEAN deq);
+extern void gatt_dbg_display_uuid(tBT_UUID bt_uuid);
+
+extern tGATTS_PENDING_NEW_SRV_START *gatt_sr_is_new_srv_chg(tBT_UUID *p_app_uuid128, tBT_UUID *p_svc_uuid, UINT16 svc_inst);
+
+extern BOOLEAN gatt_is_srv_chg_ind_pending (tGATT_TCB *p_tcb);
+extern tGATTS_SRV_CHG *gatt_is_bda_in_the_srv_chg_clt_list (BD_ADDR bda);
+
+extern BOOLEAN gatt_find_the_connected_bda(UINT8 start_idx, BD_ADDR bda, UINT8 *p_found_idx);
+extern void gatt_set_srv_chg(void);
+extern void gatt_delete_dev_from_srv_chg_clt_list(BD_ADDR bd_addr);
+extern tGATT_VALUE *gatt_add_pending_ind(tGATT_TCB  *p_tcb, tGATT_VALUE *p_ind);
+extern tGATTS_PENDING_NEW_SRV_START *gatt_add_pending_new_srv_start( tGATTS_HNDL_RANGE *p_new_srv_start);
+extern void gatt_free_srvc_db_buffer_app_id(tBT_UUID *p_app_id);
+
+/* reserved handle list */
+extern tGATT_HDL_LIST_ELEM *gatt_find_hdl_buffer_by_app_id (tBT_UUID *p_app_uuid128, tBT_UUID *p_svc_uuid, UINT16 svc_inst);
+extern tGATT_HDL_LIST_ELEM *gatt_find_hdl_buffer_by_handle(UINT16 handle);
+extern tGATT_HDL_LIST_ELEM *gatt_alloc_hdl_buffer(void);
+extern void gatt_free_hdl_buffer(tGATT_HDL_LIST_ELEM *p);
+extern BOOLEAN gatt_is_last_attribute(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_start, tBT_UUID value);
+extern void gatt_update_last_pri_srv_info(tGATT_SRV_LIST_INFO *p_list);
+extern BOOLEAN gatt_add_a_srv_to_list(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_new);
+extern BOOLEAN gatt_remove_a_srv_from_list(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_remove);
+extern BOOLEAN gatt_add_an_item_to_list(tGATT_HDL_LIST_INFO *p_list, tGATT_HDL_LIST_ELEM *p_new);
+extern BOOLEAN gatt_remove_an_item_from_list(tGATT_HDL_LIST_INFO *p_list, tGATT_HDL_LIST_ELEM *p_remove);
+extern tGATTS_SRV_CHG *gatt_add_srv_chg_clt(tGATTS_SRV_CHG *p_srv_chg);
+
+/* for background connection */
+extern BOOLEAN gatt_update_auto_connect_dev (tGATT_IF gatt_if, BOOLEAN add, BD_ADDR bd_addr);
+extern BOOLEAN gatt_add_bg_dev_list(tGATT_IF gatt_if, BD_ADDR bd_addr);
+extern BOOLEAN gatt_is_bg_dev_for_app(tGATT_BG_CONN_DEV *p_dev, tGATT_IF gatt_if);
+extern BOOLEAN gatt_remove_bg_dev_for_app(tGATT_IF gatt_if, BD_ADDR bd_addr);
+extern UINT8 gatt_get_num_apps_for_bg_dev(BD_ADDR bd_addr);
+extern BOOLEAN gatt_find_app_for_bg_dev(BD_ADDR bd_addr, tGATT_IF *p_gatt_if);
+extern BOOLEAN gatt_remove_bg_dev_from_list(tGATT_IF gatt_if, BD_ADDR bd_addr);
+extern tGATT_BG_CONN_DEV * gatt_find_bg_dev(BD_ADDR remote_bda);
+extern void gatt_deregister_bgdev_list(tGATT_IF gatt_if);
+extern void gatt_reset_bgdev_list(void);
+
+/* server function */
+extern UINT8 gatt_sr_find_i_rcb_by_handle(UINT16 handle);
+extern UINT8 gatt_sr_find_i_rcb_by_app_id(tBT_UUID *p_app_uuid128, tBT_UUID *p_svc_uuid, UINT16 svc_inst);
+extern UINT8 gatt_sr_alloc_rcb(tGATT_HDL_LIST_ELEM *p_list);
+extern tGATT_STATUS gatt_sr_process_app_rsp (tGATT_TCB *p_tcb, tGATT_IF gatt_if, UINT32 trans_id, UINT8 op_code, tGATT_STATUS status, tGATTS_RSP *p_msg);
+extern void gatt_server_handle_client_req (tGATT_TCB *p_tcb, UINT8 op_code,
+                                           UINT16 len, UINT8 *p_data);
+extern void gatt_sr_send_req_callback(UINT16 conn_id,  UINT32 trans_id,
+                                      UINT8 op_code, tGATTS_DATA *p_req_data);
+extern UINT32 gatt_sr_enqueue_cmd (tGATT_TCB *p_tcb, UINT8 op_code, UINT16 handle);
+extern BOOLEAN gatt_cancel_open(tGATT_IF gatt_if, BD_ADDR bda);
+
+/*   */
+
+extern tGATT_REG *gatt_get_regcb (tGATT_IF gatt_if);
+extern BOOLEAN gatt_is_clcb_allocated (UINT16 conn_id);
+extern tGATT_CLCB *gatt_clcb_alloc (UINT16 conn_id);
+extern void gatt_clcb_dealloc (tGATT_CLCB *p_clcb);
+
+extern void gatt_sr_copy_prep_cnt_to_cback_cnt(tGATT_TCB *p_tcb );
+extern BOOLEAN gatt_sr_is_cback_cnt_zero(tGATT_TCB *p_tcb );
+extern BOOLEAN gatt_sr_is_prep_cnt_zero(tGATT_TCB *p_tcb );
+extern void gatt_sr_reset_cback_cnt(tGATT_TCB *p_tcb );
+extern void gatt_sr_reset_prep_cnt(tGATT_TCB *p_tcb );
+extern void gatt_sr_update_cback_cnt(tGATT_TCB *p_tcb, tGATT_IF gatt_if, BOOLEAN is_inc, BOOLEAN is_reset_first);
+extern void gatt_sr_update_prep_cnt(tGATT_TCB *p_tcb, tGATT_IF gatt_if, BOOLEAN is_inc, BOOLEAN is_reset_first);
+
+extern BOOLEAN gatt_find_app_hold_link(tGATT_TCB *p_tcb, UINT8 start_idx, UINT8 *p_found_idx, tGATT_IF *p_gatt_if);
+extern UINT8 gatt_num_apps_hold_link(tGATT_TCB *p_tcb);
+extern UINT8 gatt_num_clcb_by_bd_addr(BD_ADDR bda);
+extern tGATT_TCB * gatt_find_tcb_by_cid(UINT16 lcid);
+extern tGATT_TCB * gatt_allocate_tcb_by_bdaddr(BD_ADDR bda);
+extern tGATT_TCB * gatt_get_tcb_by_idx(UINT8 tcb_idx);
+extern tGATT_TCB * gatt_find_tcb_by_addr(BD_ADDR bda);
+
+
+/* GATT client functions */
+extern void gatt_dequeue_sr_cmd (tGATT_TCB *p_tcb);
+extern UINT8 gatt_send_write_msg(tGATT_TCB *p_tcb, UINT16 clcb_idx, UINT8 op_code, UINT16 handle,
+                                 UINT16 len, UINT16 offset, UINT8 *p_data);
+extern void gatt_cleanup_upon_disc(BD_ADDR bda, UINT16 reason);
+extern void gatt_end_operation(tGATT_CLCB *p_clcb, tGATT_STATUS status, void *p_data);
+
+extern void gatt_act_discovery(tGATT_CLCB *p_clcb);
+extern void gatt_act_read(tGATT_CLCB *p_clcb, UINT16 offset);
+extern void gatt_act_write(tGATT_CLCB *p_clcb);
+extern UINT8 gatt_act_send_browse(tGATT_TCB *p_tcb, UINT16 index, UINT8 op, UINT16 s_handle, UINT16 e_handle,
+                                  tBT_UUID uuid);
+extern tGATT_CLCB *gatt_cmd_dequeue(tGATT_TCB *p_tcb, UINT8 *p_opcode);
+extern BOOLEAN gatt_cmd_enq(tGATT_TCB *p_tcb, UINT16 clcb_idx, BOOLEAN to_send, UINT8 op_code, BT_HDR *p_buf);
+extern void gatt_client_handle_server_rsp (tGATT_TCB *p_tcb, UINT8 op_code,
+                                           UINT16 len, UINT8 *p_data);
+extern void gatt_send_queue_write_cancel (tGATT_TCB *p_tcb, tGATT_CLCB *p_clcb, tGATT_EXEC_FLAG flag);
+
+/* gatt_auth.c */
+extern BOOLEAN gatt_security_check_start(tGATT_CLCB *p_clcb);
+extern void gatt_verify_signature(tGATT_TCB *p_tcb, BT_HDR *p_buf);
+extern tGATT_SEC_ACTION gatt_determine_sec_act(tGATT_CLCB *p_clcb );
+extern tGATT_STATUS gatt_get_link_encrypt_status(tGATT_TCB *p_tcb);
+extern tGATT_SEC_ACTION gatt_get_sec_act(tGATT_TCB *p_tcb);
+extern void gatt_set_sec_act(tGATT_TCB *p_tcb, tGATT_SEC_ACTION sec_act);
+
+/* gatt_db.c */
+extern BOOLEAN gatts_init_service_db (tGATT_SVC_DB *p_db, tBT_UUID service, BOOLEAN is_pri, UINT16 s_hdl, UINT16 num_handle);
+extern UINT16 gatts_add_included_service (tGATT_SVC_DB *p_db, UINT16 s_handle, UINT16 e_handle, tBT_UUID service);
+extern UINT16 gatts_add_characteristic (tGATT_SVC_DB *p_db, tGATT_PERM perm, tGATT_CHAR_PROP property, tBT_UUID *p_char_uuid);
+extern UINT16 gatts_add_char_descr (tGATT_SVC_DB *p_db, tGATT_PERM perm, tBT_UUID *p_dscp_uuid);
+extern tGATT_STATUS gatts_db_read_attr_value_by_type (tGATT_TCB *p_tcb, tGATT_SVC_DB *p_db, UINT8 op_code, BT_HDR *p_rsp, UINT16 s_handle,
+                                                      UINT16 e_handle, tBT_UUID type, UINT16 *p_len, tGATT_SEC_FLAG sec_flag, UINT8 key_size,UINT32 trans_id, UINT16 *p_cur_handle);
+extern tGATT_STATUS gatts_read_attr_value_by_handle(tGATT_TCB *p_tcb,tGATT_SVC_DB *p_db, UINT8 op_code, UINT16 handle, UINT16 offset,
+                                                    UINT8 *p_value, UINT16 *p_len, UINT16 mtu,tGATT_SEC_FLAG sec_flag,UINT8 key_size,UINT32 trans_id);
+extern tGATT_STATUS gatts_write_attr_perm_check (tGATT_SVC_DB *p_db, UINT8 op_code,UINT16 handle, UINT16 offset, UINT8 *p_data,
+                                                 UINT16 len, tGATT_SEC_FLAG sec_flag, UINT8 key_size);
+extern tGATT_STATUS gatts_read_attr_perm_check(tGATT_SVC_DB *p_db, BOOLEAN is_long, UINT16 handle, tGATT_SEC_FLAG sec_flag,UINT8 key_size);
+extern void gatts_update_srv_list_elem(UINT8 i_sreg, UINT16 handle, BOOLEAN is_primary);
+extern tBT_UUID * gatts_get_service_uuid (tGATT_SVC_DB *p_db);
+
+#endif
+
+#endif /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_main.c b/stack/gatt/gatt_main.c
new file mode 100644
index 0000000..06d87bb
--- /dev/null
+++ b/stack/gatt/gatt_main.c
@@ -0,0 +1,1115 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main ATT functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+
+#include "gki.h"
+#include "gatt_int.h"
+#include "l2c_api.h"
+#include "btm_int.h"
+#include "btm_ble_int.h"
+
+/* Configuration flags. */
+#define GATT_L2C_CFG_IND_DONE   (1<<0)
+#define GATT_L2C_CFG_CFM_DONE   (1<<1)
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void gatt_le_connect_cback (BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason);
+static void gatt_le_data_ind (BD_ADDR bd_addr, BT_HDR *p_buf);
+
+static void gatt_l2cif_connect_ind_cback (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id);
+static void gatt_l2cif_connect_cfm_cback (UINT16 l2cap_cid, UINT16 result);
+static void gatt_l2cif_config_ind_cback (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void gatt_l2cif_config_cfm_cback (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void gatt_l2cif_disconnect_ind_cback (UINT16 l2cap_cid, BOOLEAN ack_needed);
+static void gatt_l2cif_disconnect_cfm_cback (UINT16 l2cap_cid, UINT16 result);
+static void gatt_l2cif_data_ind_cback (UINT16 l2cap_cid, BT_HDR *p_msg);
+static void gatt_send_conn_cback (BOOLEAN is_bg_conn, tGATT_TCB *p_tcb);
+
+static const tL2CAP_APPL_INFO dyn_info =
+{
+    gatt_l2cif_connect_ind_cback,
+    gatt_l2cif_connect_cfm_cback,
+    NULL,
+    gatt_l2cif_config_ind_cback,
+    gatt_l2cif_config_cfm_cback,
+    gatt_l2cif_disconnect_ind_cback,
+    gatt_l2cif_disconnect_cfm_cback,
+    NULL,
+    gatt_l2cif_data_ind_cback,
+    NULL
+} ;
+
+#if GATT_DYNAMIC_MEMORY == FALSE
+tGATT_CB  gatt_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         gatt_init
+**
+** Description      This function is enable the GATT profile on the device.
+**                  It clears out the control blocks, and registers with L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_init (void)
+{
+    tL2CAP_FIXED_CHNL_REG  fixed_reg;
+
+    GATT_TRACE_DEBUG0("gatt_init()");
+
+    memset (&gatt_cb, 0, sizeof(tGATT_CB));
+
+#if defined(GATT_INITIAL_TRACE_LEVEL)
+    gatt_cb.trace_level = GATT_INITIAL_TRACE_LEVEL;
+#else
+    gatt_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+    gatt_cb.def_mtu_size = GATT_DEF_BLE_MTU_SIZE;
+    GKI_init_q (&gatt_cb.sign_op_queue);
+    /* First, register fixed L2CAP channel for ATT over BLE */
+    fixed_reg.fixed_chnl_opts.mode         = L2CAP_FCR_BASIC_MODE;
+    fixed_reg.fixed_chnl_opts.max_transmit = 0xFF;
+    fixed_reg.fixed_chnl_opts.rtrans_tout  = 2000;
+    fixed_reg.fixed_chnl_opts.mon_tout     = 12000;
+    fixed_reg.fixed_chnl_opts.mps          = 670;
+    fixed_reg.fixed_chnl_opts.tx_win_sz    = 1;
+
+    fixed_reg.pL2CA_FixedConn_Cb = gatt_le_connect_cback;
+    fixed_reg.pL2CA_FixedData_Cb = gatt_le_data_ind;
+    fixed_reg.default_idle_tout  = 0xffff;                  /* 0xffff default idle timeout */
+
+    L2CA_RegisterFixedChannel (L2CAP_ATT_CID, &fixed_reg);
+
+    /* Now, register with L2CAP for ATT PSM over BR/EDR */
+    if (!L2CA_Register (BT_PSM_ATT, (tL2CAP_APPL_INFO *) &dyn_info))
+    {
+        GATT_TRACE_ERROR0 ("ATT Dynamic Registration failed");
+    }
+
+    BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_ATT, BTM_SEC_NONE, BT_PSM_ATT, 0, 0);
+    BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_ATT, BTM_SEC_NONE, BT_PSM_ATT, 0, 0);
+
+    gatt_cb.hdl_cfg.gatt_start_hdl = GATT_GATT_START_HANDLE;
+    gatt_cb.hdl_cfg.gap_start_hdl  = GATT_GAP_START_HANDLE;
+    gatt_cb.hdl_cfg.app_start_hdl  = GATT_APP_START_HANDLE;
+    gatt_profile_db_init();
+
+}
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_connect
+**
+** Description      This function is called to initiate a connection to a peer device.
+**
+** Parameter        rem_bda: remote device address to connect to.
+**
+** Returns          TRUE if connection is started, otherwise return FALSE.
+**
+*******************************************************************************/
+BOOLEAN gatt_connect (BD_ADDR rem_bda, tGATT_TCB *p_tcb)
+{
+    BOOLEAN             gatt_ret = TRUE;
+    tBT_DEVICE_TYPE     dev_type;
+    tBLE_ADDR_TYPE      addr_type;
+
+    BTM_ReadDevInfo(rem_bda, &dev_type, &addr_type);
+
+    gatt_set_ch_state(p_tcb, GATT_CH_CONN);
+
+    if (dev_type == BT_DEVICE_TYPE_BLE)
+    {
+        p_tcb->att_lcid = L2CAP_ATT_CID;
+        gatt_ret = L2CA_ConnectFixedChnl (L2CAP_ATT_CID, rem_bda);
+    }
+    else
+    {
+        if ((p_tcb->att_lcid = L2CA_ConnectReq(BT_PSM_ATT, rem_bda)) == 0)
+            gatt_ret = FALSE;
+    }
+
+    return gatt_ret;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_disconnect
+**
+** Description      This function is called to disconnect to an ATT device.
+**
+** Parameter        rem_bda: remote device address to disconnect from.
+**
+** Returns          TRUE: if connection found and to be disconnected; otherwise
+**                  return FALSE.
+**
+*******************************************************************************/
+BOOLEAN gatt_disconnect (BD_ADDR rem_bda)
+{
+    tGATT_TCB           *p_tcb = gatt_find_tcb_by_addr(rem_bda);
+    BOOLEAN             ret = FALSE;
+    tGATT_CH_STATE      ch_state;
+    GATT_TRACE_DEBUG0 ("gatt_disconnect ");
+
+    if (p_tcb != NULL)
+    {
+        ret = TRUE;
+        if ( (ch_state = gatt_get_ch_state(p_tcb)) != GATT_CH_CLOSING )
+        {
+            if (p_tcb->att_lcid == L2CAP_ATT_CID)
+            {
+                if (ch_state == GATT_CH_OPEN)
+                    /* only LCB exist between remote device and local */
+                    ret = L2CA_RemoveFixedChnl (L2CAP_ATT_CID, rem_bda);
+                else
+                {
+                    gatt_set_ch_state(p_tcb, GATT_CH_CLOSING);
+                    ret = L2CA_CancelBleConnectReq (rem_bda);
+                }
+            }
+            else
+            {
+                ret = L2CA_DisconnectReq(p_tcb->att_lcid);
+            }
+        }
+        else
+        {
+            GATT_TRACE_DEBUG0 ("gatt_disconnect already in closing state");
+        }
+    }
+
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_update_app_hold_link_status
+**
+** Description      Update the application use link status
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_update_app_hold_link_status (tGATT_IF gatt_if, tGATT_TCB *p_tcb, BOOLEAN is_add)
+{
+    UINT8 i;
+    BOOLEAN found=FALSE;
+
+    if (p_tcb == NULL)
+    {
+        GATT_TRACE_ERROR0("gatt_update_app_hold_link_status p_tcb=NULL");
+        return;
+    }
+
+
+    for (i=0; i<GATT_MAX_APPS; i++)
+    {
+        if (p_tcb->app_hold_link[i] ==  gatt_if)
+        {
+            found = TRUE;
+            if (!is_add)
+            {
+                p_tcb->app_hold_link[i] = 0;
+                break;
+            }
+        }
+    }
+
+    if (!found && is_add)
+    {
+        for (i=0; i<GATT_MAX_APPS; i++)
+        {
+            if (p_tcb->app_hold_link[i] ==  0)
+            {
+                p_tcb->app_hold_link[i] = gatt_if;
+                found = TRUE;
+                break;
+            }
+        }
+    }
+
+    GATT_TRACE_DEBUG4("gatt_update_app_hold_link_status found=%d[1-found] idx=%d gatt_if=%d is_add=%d", found, i, gatt_if, is_add);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_update_app_use_link_flag
+**
+** Description      Update the application use link flag and optional to check the acl link
+**                  if the link is up then set the idle time out accordingly
+**
+** Returns          void.
+**
+*******************************************************************************/
+void gatt_update_app_use_link_flag (tGATT_IF gatt_if, tGATT_TCB *p_tcb, BOOLEAN is_add, BOOLEAN check_acl_link)
+{
+    GATT_TRACE_DEBUG2("gatt_update_app_use_link_flag  is_add=%d chk_link=%d",
+                      is_add, check_acl_link);
+
+    gatt_update_app_hold_link_status(gatt_if, p_tcb, is_add);
+
+    if (check_acl_link &&
+        p_tcb &&
+        (BTM_GetHCIConnHandle(p_tcb->peer_bda) != GATT_INVALID_ACL_HANDLE))
+    {
+        if (is_add)
+        {
+            GATT_TRACE_DEBUG0("GATT disables link idle timer");
+            /* acl link is connected disable the idle timeout */
+            GATT_SetIdleTimeout(p_tcb->peer_bda, GATT_LINK_NO_IDLE_TIMEOUT);
+        }
+        else
+        {
+            if (!gatt_num_apps_hold_link(p_tcb))
+            {
+                /* acl link is connected but no application needs to use the link
+                   so set the timeout value to GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP seconds */
+                GATT_TRACE_DEBUG1("GATT starts link idle timer =%d sec", GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP);
+                GATT_SetIdleTimeout(p_tcb->peer_bda, GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP);
+            }
+
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_act_connect
+**
+** Description      GATT connection initiation.
+**
+** Returns          void.
+**
+*******************************************************************************/
+BOOLEAN gatt_act_connect (tGATT_REG *p_reg, BD_ADDR bd_addr)
+{
+    BOOLEAN     ret = FALSE;
+    tGATT_TCB   *p_tcb;
+
+    GATT_TRACE_DEBUG0("gatt_act_connect");
+
+    if ((p_tcb = gatt_find_tcb_by_addr(bd_addr)) != NULL)
+    {
+        ret = TRUE;
+        if(gatt_get_ch_state(p_tcb) == GATT_CH_CLOSING )
+        {
+            /* need to complete the closing first */
+            ret = FALSE;
+        }
+    }
+    else
+    {
+        if ((p_tcb = gatt_allocate_tcb_by_bdaddr(bd_addr)) != NULL)
+        {
+            if (!gatt_connect(bd_addr,  p_tcb))
+            {
+                GATT_TRACE_ERROR0("gatt_connect failed");
+                memset(p_tcb, 0, sizeof(tGATT_TCB));
+            }
+            else
+                ret = TRUE;
+        }
+        else
+        {
+            ret = 0;
+            GATT_TRACE_ERROR1("Max TCB for gatt_if [%d] reached.", p_reg->gatt_if);
+        }
+    }
+
+    if (ret)
+    {
+        gatt_update_app_use_link_flag(p_reg->gatt_if, p_tcb, TRUE, FALSE);
+    }
+
+    return ret;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_le_connect_cback
+**
+** Description      This callback function is called by L2CAP to indicate that
+**                  the ATT fixed channel for LE is
+**                      connected (conn = TRUE)/disconnected (conn = FALSE).
+**
+*******************************************************************************/
+static void gatt_le_connect_cback (BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason)
+{
+
+    tGATT_TCB       *p_tcb = gatt_find_tcb_by_addr(bd_addr);
+
+    BOOLEAN                 check_srv_chg = FALSE;
+    tGATTS_SRV_CHG          *p_srv_chg_clt=NULL;
+    BOOLEAN                 is_bg_conn = FALSE;
+
+
+    GATT_TRACE_DEBUG3 ("GATT   ATT protocol channel with BDA: %08x%04x is %s",
+                       (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                       (bd_addr[4]<<8)+bd_addr[5], (connected) ? "connected" : "disconnected");
+
+
+    if ((p_srv_chg_clt = gatt_is_bda_in_the_srv_chg_clt_list(bd_addr)) != NULL)
+    {
+        check_srv_chg = TRUE;
+    }
+    else
+    {
+        if (btm_sec_is_a_bonded_dev(bd_addr))
+            gatt_add_a_bonded_dev_for_srv_chg(bd_addr);
+    }
+
+    if (connected)
+    {
+        GATT_TRACE_DEBUG1("connected is TRUE reason=%d",reason );
+        /* BR/EDR lik, ignore this callback */
+        if (reason == 0)
+            return;
+
+        /* do we have a channel initiating a connection? */
+        if (p_tcb)
+        {
+            if (check_srv_chg)
+                gatt_chk_srv_chg (p_srv_chg_clt);
+            /* we are initiating connection */
+            if ( gatt_get_ch_state(p_tcb) == GATT_CH_CONN)
+            {
+                /* send callback */
+                gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+                p_tcb->payload_size = GATT_DEF_BLE_MTU_SIZE;
+
+                gatt_send_conn_cback(FALSE, p_tcb);
+            }
+            else /* there was an exisiting link, ignore the callback */
+            {
+                GATT_TRACE_ERROR0("connection already up, ignore it");
+                return;
+            }
+        }
+        /* this is incoming connection or background connection callback */
+        else
+        {
+            if ((p_tcb = gatt_allocate_tcb_by_bdaddr(bd_addr)) != NULL)
+            {
+                p_tcb->att_lcid = L2CAP_ATT_CID;
+
+                gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+
+                p_tcb->payload_size = GATT_DEF_BLE_MTU_SIZE;
+                if (L2CA_GetBleConnRole(p_tcb->peer_bda)== HCI_ROLE_MASTER)
+                {
+                    is_bg_conn = TRUE;
+                }
+                gatt_send_conn_cback (is_bg_conn, p_tcb);
+                if (check_srv_chg)
+                {
+                    gatt_chk_srv_chg (p_srv_chg_clt);
+                }
+            }
+            else
+            {
+                GATT_TRACE_ERROR0("CCB max out, no rsources");
+            }
+        }
+    }
+    else
+    {
+        gatt_cleanup_upon_disc(bd_addr, reason);
+        GATT_TRACE_DEBUG0 ("ATT disconnected");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_le_data_ind
+**
+** Description      This function is called when data is received from L2CAP.
+**                  if we are the originator of the connection, we are the ATT
+**                  client, and the received message is queued up for the client.
+**
+**                  If we are the destination of the connection, we are the ATT
+**                  server, so the message is passed to the server processing
+**                  function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatt_le_data_ind (BD_ADDR bd_addr, BT_HDR *p_buf)
+{
+    tGATT_TCB    *p_tcb;
+
+    /* Find CCB based on bd addr */
+    if ((p_tcb = gatt_find_tcb_by_addr (bd_addr)) != NULL &&
+        gatt_get_ch_state(p_tcb) >= GATT_CH_OPEN)
+    {
+        gatt_data_process(p_tcb, p_buf);
+    }
+    else
+    {
+        GKI_freebuf (p_buf);
+
+        if (p_tcb != NULL)
+        {
+            GATT_TRACE_WARNING1 ("ATT - Ignored L2CAP data while in state: %d",
+                                 gatt_get_ch_state(p_tcb));
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_connect_ind
+**
+** Description      This function handles an inbound connection indication
+**                  from L2CAP. This is the case where we are acting as a
+**                  server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatt_l2cif_connect_ind_cback (BD_ADDR  bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    /* do we already have a control channel for this peer? */
+    UINT8       result = L2CAP_CONN_OK;
+    tL2CAP_CFG_INFO cfg;
+    tGATT_TCB       *p_tcb = gatt_find_tcb_by_addr(bd_addr);
+
+    GATT_TRACE_ERROR1("Connection indication cid = %d", lcid);
+    /* new connection ? */
+    if (p_tcb == NULL)
+    {
+        /* allocate tcb */
+        if ((p_tcb = gatt_allocate_tcb_by_bdaddr(bd_addr)) == NULL)
+        {
+            /* no tcb available, reject L2CAP connection */
+            result = L2CAP_CONN_NO_RESOURCES;
+        }
+        else
+            p_tcb->att_lcid = lcid;
+
+    }
+    else /* existing connection , reject it */
+    {
+        result = L2CAP_CONN_NO_RESOURCES;
+    }
+
+    /* Send L2CAP connect rsp */
+    L2CA_ConnectRsp(bd_addr, id, lcid, result, 0);
+
+    /* if result ok, proceed with connection */
+    if (result == L2CAP_CONN_OK)
+    {
+        /* transition to configuration state */
+        gatt_set_ch_state(p_tcb, GATT_CH_CFG);
+
+        /* Send L2CAP config req */
+        memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        cfg.mtu_present = TRUE;
+        cfg.mtu = GATT_MAX_MTU_SIZE;
+
+        L2CA_ConfigReq(lcid, &cfg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2c_connect_cfm_cback
+**
+** Description      This is the L2CAP connect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_connect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tGATT_TCB       *p_tcb;
+    tL2CAP_CFG_INFO cfg;
+
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL)
+    {
+        GATT_TRACE_DEBUG3("gatt_l2c_connect_cfm_cback result: %d ch_state: %d, lcid:0x%x", result, gatt_get_ch_state(p_tcb), p_tcb->att_lcid);
+
+        /* if in correct state */
+        if (gatt_get_ch_state(p_tcb) == GATT_CH_CONN)
+        {
+            /* if result successful */
+            if (result == L2CAP_CONN_OK)
+            {
+                /* set channel state */
+                gatt_set_ch_state(p_tcb, GATT_CH_CFG);
+
+                /* Send L2CAP config req */
+                memset(&cfg, 0, sizeof(tL2CAP_CFG_INFO));
+                cfg.mtu_present = TRUE;
+                cfg.mtu = GATT_MAX_MTU_SIZE;
+                L2CA_ConfigReq(lcid, &cfg);
+            }
+            /* else initiating connection failure */
+            else
+            {
+                gatt_cleanup_upon_disc(p_tcb->peer_bda, result);
+            }
+        }
+        else /* wrong state, disconnect it */
+        {
+            if (result == L2CAP_CONN_OK)
+            {
+                /* just in case the peer also accepts our connection - Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_config_cfm_cback
+**
+** Description      This is the L2CAP config confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tGATT_TCB       *p_tcb;
+    tGATTS_SRV_CHG  *p_srv_chg_clt=NULL;
+
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL)
+    {
+        /* if in correct state */
+        if ( gatt_get_ch_state(p_tcb) == GATT_CH_CFG)
+        {
+            /* if result successful */
+            if (p_cfg->result == L2CAP_CFG_OK)
+            {
+                /* update flags */
+                p_tcb->ch_flags |= GATT_L2C_CFG_CFM_DONE;
+
+                /* if configuration complete */
+                if (p_tcb->ch_flags & GATT_L2C_CFG_IND_DONE)
+                {
+                    gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+
+                    if ((p_srv_chg_clt = gatt_is_bda_in_the_srv_chg_clt_list(p_tcb->peer_bda)) != NULL)
+                    {
+                        gatt_chk_srv_chg(p_srv_chg_clt);
+                    }
+                    else
+                    {
+                        if (btm_sec_is_a_bonded_dev(p_tcb->peer_bda))
+                            gatt_add_a_bonded_dev_for_srv_chg(p_tcb->peer_bda);
+                    }
+
+                    /* send callback */
+                    gatt_send_conn_cback(FALSE, p_tcb);
+                }
+            }
+            /* else failure */
+            else
+            {
+                /* Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_config_ind_cback
+**
+** Description      This is the L2CAP config indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tGATT_TCB       *p_tcb;
+    tGATTS_SRV_CHG  *p_srv_chg_clt=NULL;
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL)
+    {
+        /* GATT uses the smaller of our MTU and peer's MTU  */
+        if ( (p_cfg->mtu_present) && (p_cfg->mtu < L2CAP_DEFAULT_MTU) )
+            p_tcb->payload_size = p_cfg->mtu;
+        else
+            p_tcb->payload_size = L2CAP_DEFAULT_MTU;
+
+        /* send L2CAP configure response */
+        memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        p_cfg->result = L2CAP_CFG_OK;
+        L2CA_ConfigRsp(lcid, p_cfg);
+
+        /* if first config ind */
+        if ((p_tcb->ch_flags & GATT_L2C_CFG_IND_DONE) == 0)
+        {
+            /* update flags */
+            p_tcb->ch_flags |= GATT_L2C_CFG_IND_DONE;
+
+            /* if configuration complete */
+            if (p_tcb->ch_flags & GATT_L2C_CFG_CFM_DONE)
+            {
+                gatt_set_ch_state(p_tcb, GATT_CH_OPEN);
+                if ((p_srv_chg_clt = gatt_is_bda_in_the_srv_chg_clt_list(p_tcb->peer_bda)) != NULL)
+                {
+                    gatt_chk_srv_chg(p_srv_chg_clt);
+                }
+                else
+                {
+                    if (btm_sec_is_a_bonded_dev(p_tcb->peer_bda))
+                        gatt_add_a_bonded_dev_for_srv_chg(p_tcb->peer_bda);
+                }
+
+                /* send callback */
+                gatt_send_conn_cback(FALSE, p_tcb);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_disconnect_ind_cback
+**
+** Description      This is the L2CAP disconnect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed)
+{
+    tGATT_TCB       *p_tcb;
+    UINT16          reason;
+
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL)
+    {
+        if (ack_needed)
+        {
+            /* send L2CAP disconnect response */
+            L2CA_DisconnectRsp(lcid);
+        }
+        if (btm_sec_is_a_bonded_dev(p_tcb->peer_bda))
+            gatt_add_a_bonded_dev_for_srv_chg(p_tcb->peer_bda);
+        /* if ACL link is still up, no reason is logged, l2cap is disconnect from peer */
+        if ((reason = L2CA_GetDisconnectReason(p_tcb->peer_bda)) == 0)
+            reason = GATT_CONN_TERMINATE_PEER_USER;
+
+        /* send disconnect callback */
+        gatt_cleanup_upon_disc(p_tcb->peer_bda, reason);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_disconnect_cfm_cback
+**
+** Description      This is the L2CAP disconnect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_disconnect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tGATT_TCB       *p_tcb;
+    UINT16          reason;
+
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL)
+    {
+        if (btm_sec_is_a_bonded_dev(p_tcb->peer_bda))
+            gatt_add_a_bonded_dev_for_srv_chg(p_tcb->peer_bda);
+        /* send disconnect callback */
+        /* if ACL link is still up, no reason is logged, l2cap is disconnect from peer */
+        if ((reason = L2CA_GetDisconnectReason(p_tcb->peer_bda)) == 0)
+            reason = GATT_CONN_TERMINATE_LOCAL_HOST;
+
+        gatt_cleanup_upon_disc(p_tcb->peer_bda, reason);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_l2cif_data_ind_cback
+**
+** Description      This is the L2CAP data indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_l2cif_data_ind_cback(UINT16 lcid, BT_HDR *p_buf)
+{
+    tGATT_TCB       *p_tcb;
+
+    /* look up clcb for this channel */
+    if ((p_tcb = gatt_find_tcb_by_cid(lcid)) != NULL &&
+        gatt_get_ch_state(p_tcb) == GATT_CH_OPEN)
+    {
+        /* process the data */
+        gatt_data_process(p_tcb, p_buf);
+    }
+    else /* prevent buffer leak */
+        GKI_freebuf(p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_send_conn_cback
+**
+** Description      Callback used to notify layer above about a connection.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatt_send_conn_cback(BOOLEAN is_bg_conn, tGATT_TCB *p_tcb)
+{
+    UINT8               i;
+    tGATT_REG           *p_reg;
+    tGATT_BG_CONN_DEV   *p_bg_dev=NULL;
+    UINT16              conn_id;
+
+    if (is_bg_conn)
+        p_bg_dev = gatt_find_bg_dev(p_tcb->peer_bda);
+
+    /* notifying all applications for the connection up event */
+    for (i = 0,  p_reg = gatt_cb.cl_rcb ; i < GATT_MAX_APPS; i++, p_reg++)
+    {
+        if (p_reg->in_use)
+        {
+            if (p_bg_dev && gatt_is_bg_dev_for_app(p_bg_dev, p_reg->gatt_if))
+                gatt_update_app_use_link_flag(p_reg->gatt_if, p_tcb, TRUE, TRUE);
+
+            if (p_reg->app_cb.p_conn_cb)
+            {
+                conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_reg->gatt_if);
+                (*p_reg->app_cb.p_conn_cb)(p_reg->gatt_if, p_tcb->peer_bda, conn_id, TRUE, 0);
+            }
+        }
+    }
+
+
+    if (gatt_num_apps_hold_link(p_tcb))
+    {
+        /* disable idle timeout if one or more clients are holding the link disable the idle timer */
+        GATT_SetIdleTimeout(p_tcb->peer_bda, GATT_LINK_NO_IDLE_TIMEOUT);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_le_data_ind
+**
+** Description      This function is called when data is received from L2CAP.
+**                  if we are the originator of the connection, we are the ATT
+**                  client, and the received message is queued up for the client.
+**
+**                  If we are the destination of the connection, we are the ATT
+**                  server, so the message is passed to the server processing
+**                  function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_data_process (tGATT_TCB *p_tcb, BT_HDR *p_buf)
+{
+    UINT8   *p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    UINT8   op_code, pseudo_op_code;
+    UINT16  msg_len;
+
+
+    if (p_buf->len > 0)
+    {
+        msg_len = p_buf->len - 1;
+        STREAM_TO_UINT8(op_code, p);
+
+        /* remove the two MSBs associated with sign write and write cmd */
+        pseudo_op_code = op_code & (~GATT_WRITE_CMD_MASK);
+
+        if (pseudo_op_code < GATT_OP_CODE_MAX)
+        {
+            if (op_code == GATT_SIGN_CMD_WRITE)
+            {
+                gatt_verify_signature(p_tcb, p_buf);
+                return;
+            }
+            else
+            {
+                /* message from client */
+                if ((op_code % 2) == 0)
+                    gatt_server_handle_client_req (p_tcb, op_code, msg_len, p);
+                else
+                    gatt_client_handle_server_rsp (p_tcb, op_code, msg_len, p);
+            }
+        }
+        else
+        {
+            GATT_TRACE_ERROR1 ("ATT - Rcvd L2CAP data, unknown cmd: 0x%x", op_code);
+        }
+    }
+    else
+    {
+        GATT_TRACE_ERROR0 ("invalid data length, ignore");
+    }
+
+    GKI_freebuf (p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_add_a_bonded_dev_for_srv_chg
+**
+** Description      Add a bonded dev to the service changed client list
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_add_a_bonded_dev_for_srv_chg (BD_ADDR bda)
+{
+    tGATTS_SRV_CHG *p_buf;
+    tGATTS_SRV_CHG_REQ req;
+    tGATTS_SRV_CHG srv_chg_clt;
+
+    memcpy(srv_chg_clt.bda, bda, BD_ADDR_LEN);
+    srv_chg_clt.srv_changed = FALSE;
+    if ((p_buf = gatt_add_srv_chg_clt(&srv_chg_clt)) != NULL)
+    {
+        memcpy(req.srv_chg.bda, bda, BD_ADDR_LEN);
+        req.srv_chg.srv_changed = FALSE;
+        if (gatt_cb.cb_info.p_srv_chg_callback)
+            (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_ADD_CLIENT, &req, NULL);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_send_srv_chg_ind
+**
+** Description      This function is called to send a service chnaged indication to
+**                  the specified bd address
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_send_srv_chg_ind (BD_ADDR peer_bda)
+{
+    UINT8   handle_range[GATT_SIZE_OF_SRV_CHG_HNDL_RANGE];
+    UINT8   *p = handle_range;
+    UINT16  conn_id;
+
+    GATT_TRACE_DEBUG0("gatt_send_srv_chg_ind");
+
+    if (gatt_cb.handle_of_h_r)
+    {
+        if ((conn_id = gatt_profile_find_conn_id_by_bd_addr(peer_bda)) != GATT_INVALID_CONN_ID)
+        {
+            UINT16_TO_STREAM (p, 1);
+            UINT16_TO_STREAM (p, 0xFFFF);
+            GATTS_HandleValueIndication (conn_id,
+                                         gatt_cb.handle_of_h_r,
+                                         GATT_SIZE_OF_SRV_CHG_HNDL_RANGE,
+                                         handle_range);
+        }
+        else
+        {
+            GATT_TRACE_ERROR2("Unable to find conn_id for  %08x%04x ",
+                              (peer_bda[0]<<24)+(peer_bda[1]<<16)+(peer_bda[2]<<8)+peer_bda[3],
+                              (peer_bda[4]<<8)+peer_bda[5] );
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_chk_srv_chg
+**
+** Description      Check sending service chnaged Indication is required or not
+**                  if required then send the Indication
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_chk_srv_chg(tGATTS_SRV_CHG *p_srv_chg_clt)
+{
+    GATT_TRACE_DEBUG1("gatt_chk_srv_chg srv_changed=%d", p_srv_chg_clt->srv_changed );
+
+    if (p_srv_chg_clt->srv_changed)
+    {
+        gatt_send_srv_chg_ind(p_srv_chg_clt->bda);
+    }
+    else
+    {
+        GATT_TRACE_DEBUG0("No need to send srv chg ");
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_init_srv_chg
+**
+** Description      This function is used to initialize the service changed
+**                  attribute value
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_init_srv_chg (void)
+{
+    tGATTS_SRV_CHG_REQ req;
+    tGATTS_SRV_CHG_RSP rsp;
+    BOOLEAN status;
+    UINT8 num_clients,i;
+    tGATTS_SRV_CHG  srv_chg_clt;
+
+    GATT_TRACE_DEBUG0("gatt_init_srv_chg");
+    if (gatt_cb.cb_info.p_srv_chg_callback)
+    {
+        status = (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_READ_NUM_CLENTS, NULL, &rsp);
+
+        if (status && rsp.num_clients)
+        {
+            GATT_TRACE_DEBUG1("gatt_init_srv_chg num_srv_chg_clt_clients=%d", rsp.num_clients);
+            num_clients = rsp.num_clients;
+            i = 1; /* use one based index */
+            while ((i <= num_clients) && status)
+            {
+                req.client_read_index = i;
+                if ((status = (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_READ_CLENT, &req, &rsp)))
+                {
+                    memcpy(&srv_chg_clt, &rsp.srv_chg ,sizeof(tGATTS_SRV_CHG));
+                    if (gatt_add_srv_chg_clt(&srv_chg_clt) == NULL)
+                    {
+                        GATT_TRACE_ERROR0("Unable to add a service change client");
+                        status = FALSE;
+                    }
+                }
+                i++;
+            }
+        }
+    }
+    else
+    {
+        GATT_TRACE_DEBUG0("gatt_init_srv_chg callback not registered yet");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_proc_srv_chg
+**
+** Description      This function is process the service changed request
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_proc_srv_chg (void)
+{
+    UINT8               start_idx, found_idx;
+    BD_ADDR             bda;
+    BOOLEAN             srv_chg_ind_pending=FALSE;
+    tGATT_TCB           *p_tcb;
+
+    GATT_TRACE_DEBUG0 ("gatt_proc_srv_chg");
+
+    if (gatt_cb.cb_info.p_srv_chg_callback && gatt_cb.handle_of_h_r)
+    {
+        gatt_set_srv_chg();
+        start_idx =0;
+        while (gatt_find_the_connected_bda(start_idx, bda, &found_idx))
+        {
+            p_tcb = &gatt_cb.tcb[found_idx];;
+            srv_chg_ind_pending  = gatt_is_srv_chg_ind_pending(p_tcb);
+
+            if (!srv_chg_ind_pending)
+            {
+                gatt_send_srv_chg_ind(bda);
+            }
+            else
+            {
+                GATT_TRACE_DEBUG0 ("discard srv chg - already has one in the queue");
+            }
+            start_idx = ++found_idx;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_set_ch_state
+**
+** Description      This function set the ch_state in tcb
+**
+** Returns          none
+**
+*******************************************************************************/
+void gatt_set_ch_state(tGATT_TCB *p_tcb, tGATT_CH_STATE ch_state)
+{
+    if (p_tcb)
+    {
+        GATT_TRACE_DEBUG2 ("gatt_set_ch_state: old=%d new=%d", p_tcb->ch_state, ch_state);
+        p_tcb->ch_state = ch_state;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_get_ch_state
+**
+** Description      This function get the ch_state in tcb
+**
+** Returns          none
+**
+*******************************************************************************/
+tGATT_CH_STATE gatt_get_ch_state(tGATT_TCB *p_tcb)
+{
+    tGATT_CH_STATE ch_state = GATT_CH_CLOSE;
+    if (p_tcb)
+    {
+        GATT_TRACE_DEBUG1 ("gatt_get_ch_state: ch_state=%d", p_tcb->ch_state);
+        ch_state = p_tcb->ch_state;
+    }
+    return ch_state;
+}
+
+#endif /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_sr.c b/stack/gatt/gatt_sr.c
new file mode 100644
index 0000000..ddecdb3
--- /dev/null
+++ b/stack/gatt/gatt_sr.c
@@ -0,0 +1,1486 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the GATT server functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+#include <string.h>
+#include "gatt_int.h"
+#include "l2c_api.h"
+
+
+/*******************************************************************************
+**
+** Function         gatt_sr_enqueue_cmd
+**
+** Description      This function enqueue the request from client which needs a
+**                  application response, and update the transaction ID.
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT32 gatt_sr_enqueue_cmd (tGATT_TCB *p_tcb, UINT8 op_code, UINT16 handle)
+{
+    tGATT_SR_CMD   *p_cmd = &p_tcb->sr_cmd;
+    UINT32          trans_id = 0;
+
+    if ( (p_cmd->op_code == 0) ||
+         (op_code == GATT_HANDLE_VALUE_CONF)) /* no pending request */
+    {
+        if (op_code == GATT_CMD_WRITE ||
+            op_code == GATT_SIGN_CMD_WRITE  ||
+            op_code == GATT_REQ_MTU ||
+            op_code == GATT_HANDLE_VALUE_CONF)
+        {
+            trans_id = ++p_tcb->trans_id;
+        }
+        else
+        {
+            p_cmd->trans_id   = ++p_tcb->trans_id;
+            p_cmd->op_code    = op_code;
+            p_cmd->handle     = handle;
+            p_cmd->status     = GATT_NOT_FOUND;
+            p_tcb->trans_id %= GATT_TRANS_ID_MAX;
+            trans_id = p_cmd->trans_id;
+        }
+    }
+
+    return trans_id;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_cmd_empty
+**
+** Description      This function check the server command queue is empty or not.
+**
+** Returns          TRUE if empty, FALSE if there is pending command.
+**
+*******************************************************************************/
+BOOLEAN gatt_sr_cmd_empty (tGATT_TCB *p_tcb)
+{
+    return(p_tcb->sr_cmd.op_code == 0);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_dequeue_sr_cmd
+**
+** Description      This function dequeue the request from command queue.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_dequeue_sr_cmd (tGATT_TCB *p_tcb)
+{
+    /* Double check in case any buffers are queued */
+    GATT_TRACE_DEBUG0("gatt_dequeue_sr_cmd" );
+    if (p_tcb->sr_cmd.p_rsp_msg)
+    {
+        GATT_TRACE_ERROR1("free p_tcb->sr_cmd.p_rsp_msg = %d", p_tcb->sr_cmd.p_rsp_msg);
+
+        GKI_freebuf (p_tcb->sr_cmd.p_rsp_msg);
+    }
+
+    while (p_tcb->sr_cmd.multi_rsp_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_tcb->sr_cmd.multi_rsp_q));
+    memset( &p_tcb->sr_cmd, 0, sizeof(tGATT_SR_CMD));
+}
+
+/*******************************************************************************
+**
+** Function         process_read_multi_rsp
+**
+** Description      This function check the read multiple response.
+**
+** Returns          BOOLEAN if all replies have been received
+**
+*******************************************************************************/
+static BOOLEAN process_read_multi_rsp (tGATT_SR_CMD *p_cmd, tGATT_STATUS status,
+                                       tGATTS_RSP *p_msg, UINT16 mtu)
+{
+    tGATTS_RSP       *p_rsp;
+    UINT16          ii, total_len, len;
+    BT_HDR          *p_buf = (BT_HDR *)GKI_getbuf((UINT16)sizeof(tGATTS_RSP));
+    UINT8           *p;
+    BOOLEAN         is_overflow = FALSE;
+
+    GATT_TRACE_DEBUG2 ("process_read_multi_rsp status=%d mtu=%d", status, mtu);
+
+    if (p_buf == NULL)
+    {
+        p_cmd->status = GATT_INSUF_RESOURCE;
+        return FALSE;
+    }
+
+    /* Enqueue the response */
+    memcpy((void *)p_buf, (const void *)p_msg, sizeof(tGATTS_RSP));
+    GKI_enqueue (&p_cmd->multi_rsp_q, p_buf);
+
+    p_cmd->status = status;
+    if (status == GATT_SUCCESS)
+    {
+        GATT_TRACE_DEBUG2 ("Multi read count=%d num_hdls=%d",
+                           p_cmd->multi_rsp_q.count, p_cmd->multi_req.num_handles);
+        /* Wait till we get all the responses */
+        if (p_cmd->multi_rsp_q.count == p_cmd->multi_req.num_handles)
+        {
+            len = sizeof(BT_HDR) + L2CAP_MIN_OFFSET + mtu;
+            if ((p_buf = (BT_HDR *)GKI_getbuf(len)) == NULL)
+            {
+                p_cmd->status = GATT_INSUF_RESOURCE;
+                return(TRUE);
+            }
+
+            memset(p_buf, 0, len);
+            p_buf->offset = L2CAP_MIN_OFFSET;
+            p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+            /* First byte in the response is the opcode */
+            *p++ = GATT_RSP_READ_MULTI;
+            p_buf->len = 1;
+
+            /* Now walk through the buffers puting the data into the response in order */
+            for (ii = 0; ii < p_cmd->multi_req.num_handles; ii++)
+            {
+                if (ii==0)
+                {
+                    p_rsp = (tGATTS_RSP *)GKI_getfirst (&p_cmd->multi_rsp_q);
+                }
+                else
+                {
+                    p_rsp = (tGATTS_RSP *)GKI_getnext (p_rsp);
+                }
+
+                if (p_rsp != NULL)
+                {
+
+                    total_len = (p_buf->len + p_rsp->attr_value.len);
+
+                    if (total_len >  mtu)
+                    {
+                        /* just send the partial response for the overflow case */
+                        len = p_rsp->attr_value.len - (total_len - mtu);
+                        is_overflow = TRUE;
+                        GATT_TRACE_DEBUG2 ("multi read overflow available len=%d val_len=%d", len, p_rsp->attr_value.len );
+                    }
+                    else
+                    {
+                        len = p_rsp->attr_value.len;
+                    }
+
+                    if (p_rsp->attr_value.handle == p_cmd->multi_req.handles[ii])
+                    {
+                        memcpy (p, p_rsp->attr_value.value, len);
+                        if (!is_overflow)
+                            p += len;
+                        p_buf->len += len;
+                    }
+                    else
+                    {
+                        p_cmd->status        = GATT_NOT_FOUND;
+                        break;
+                    }
+
+                    if (is_overflow)
+                        break;
+
+                }
+                else
+                {
+                    p_cmd->status        = GATT_NOT_FOUND;
+                    break;
+                }
+
+            } /* loop through all handles*/
+
+
+            /* Sanity check on the buffer length */
+            if (p_buf->len == 0)
+            {
+                GATT_TRACE_ERROR0("process_read_multi_rsp - nothing found!!");
+                p_cmd->status = GATT_NOT_FOUND;
+                GKI_freebuf (p_buf);
+                GATT_TRACE_DEBUG0(" GKI_freebuf (p_buf)");
+            }
+            else if (p_cmd->p_rsp_msg != NULL)
+            {
+                GKI_freebuf (p_buf);
+            }
+            else
+            {
+                p_cmd->p_rsp_msg = p_buf;
+            }
+
+            return(TRUE);
+        }
+    }
+    else    /* any handle read exception occurs, return error */
+    {
+        return(TRUE);
+    }
+
+    /* If here, still waiting */
+    return(FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_process_app_rsp
+**
+** Description      This function checks whether the response message from application
+**                  match any pending request or not.
+**
+** Returns          void
+**
+*******************************************************************************/
+tGATT_STATUS gatt_sr_process_app_rsp (tGATT_TCB *p_tcb, tGATT_IF gatt_if,
+                                      UINT32 trans_id, UINT8 op_code,
+                                      tGATT_STATUS status, tGATTS_RSP *p_msg)
+{
+    tGATT_STATUS    ret_code = GATT_SUCCESS;
+
+    GATT_TRACE_DEBUG1("gatt_sr_process_app_rsp gatt_if=%d", gatt_if);
+
+    gatt_sr_update_cback_cnt(p_tcb, gatt_if, FALSE, FALSE);
+
+    if (op_code == GATT_REQ_READ_MULTI)
+    {
+        /* If no error and still waiting, just return */
+        if (!process_read_multi_rsp (&p_tcb->sr_cmd, status, p_msg, p_tcb->payload_size))
+            return(GATT_SUCCESS);
+    }
+    else
+    {
+        if (op_code == GATT_REQ_PREPARE_WRITE && status == GATT_SUCCESS)
+            gatt_sr_update_prep_cnt(p_tcb, gatt_if, TRUE, FALSE);
+
+        if (op_code == GATT_REQ_EXEC_WRITE && status != GATT_SUCCESS)
+            gatt_sr_reset_cback_cnt(p_tcb);
+
+        p_tcb->sr_cmd.status = status;
+
+        if (gatt_sr_is_cback_cnt_zero(p_tcb)
+            && status == GATT_SUCCESS)
+        {
+            if (p_tcb->sr_cmd.p_rsp_msg == NULL)
+            {
+                p_tcb->sr_cmd.p_rsp_msg = attp_build_sr_msg (p_tcb, (UINT8)(op_code + 1), (tGATT_SR_MSG *)p_msg);
+            }
+            else
+            {
+                GATT_TRACE_ERROR0("Exception!!! already has respond message");
+            }
+        }
+    }
+    if (gatt_sr_is_cback_cnt_zero(p_tcb))
+    {
+        if ( (p_tcb->sr_cmd.status == GATT_SUCCESS) && (p_tcb->sr_cmd.p_rsp_msg) )
+        {
+            ret_code = attp_send_sr_msg (p_tcb, p_tcb->sr_cmd.p_rsp_msg);
+            p_tcb->sr_cmd.p_rsp_msg = NULL;
+        }
+        else
+        {
+            ret_code = gatt_send_error_rsp (p_tcb, status, op_code, p_tcb->sr_cmd.handle, FALSE);
+        }
+
+        gatt_dequeue_sr_cmd(p_tcb);
+    }
+
+    GATT_TRACE_DEBUG1("gatt_sr_process_app_rsp ret_code=%d", ret_code);
+
+    return ret_code;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_process_exec_write_req
+**
+** Description      This function is called to process the execute write request
+**                  from client.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_exec_write_req (tGATT_TCB *p_tcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    UINT8   *p = p_data, flag, i = 0;
+    UINT32  trans_id = 0;
+    BT_HDR  *p_buf;
+    tGATT_IF gatt_if;
+    UINT16  conn_id;
+
+    STREAM_TO_UINT8(flag, p);
+
+    /* mask the flag */
+    flag &= GATT_PREP_WRITE_EXEC;
+
+
+    /* no prep write is queued */
+    if (!gatt_sr_is_prep_cnt_zero(p_tcb))
+    {
+        trans_id = gatt_sr_enqueue_cmd(p_tcb, op_code, 0);
+        gatt_sr_copy_prep_cnt_to_cback_cnt(p_tcb);
+
+        for (i=0; i<GATT_MAX_APPS; i++)
+        {
+            if (p_tcb->prep_cnt[i])
+            {
+                gatt_if = (tGATT_IF) (i+1);
+                conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, gatt_if);
+                gatt_sr_send_req_callback(conn_id,
+                                          trans_id,
+                                          GATTS_REQ_TYPE_WRITE_EXEC,
+                                          (tGATTS_DATA *)&flag);
+                p_tcb->prep_cnt[i]= 0;
+            }
+        }
+    }
+    else /* nothing needs to be executed , send response now */
+    {
+        GATT_TRACE_ERROR0("gatt_process_exec_write_req: no prepare write pending");
+
+        if ((p_buf = attp_build_sr_msg(p_tcb, GATT_RSP_EXEC_WRITE, NULL)) != NULL)
+        {
+            attp_send_sr_msg (p_tcb, p_buf);
+        }
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_process_read_multi_req
+**
+** Description      This function is called to process the read multiple request
+**                  from client.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_process_read_multi_req (tGATT_TCB *p_tcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    UINT32          trans_id;
+    UINT16          handle, ll = len;
+    UINT8           *p = p_data, i_rcb;
+    tGATT_STATUS    err = GATT_SUCCESS;
+    UINT8           sec_flag, key_size;
+    tGATTS_RSP       *p_msg;
+
+    GATT_TRACE_DEBUG0("gatt_process_read_multi_req" );
+    p_tcb->sr_cmd.multi_req.num_handles = 0;
+
+    gatt_sr_get_sec_info(p_tcb->peer_bda,
+                         (BOOLEAN)(p_tcb->att_lcid == L2CAP_ATT_CID),
+                         &sec_flag,
+                         &key_size);
+
+#if GATT_CONFORMANCE_TESTING == TRUE
+    if (gatt_cb.enable_err_rsp && gatt_cb.req_op_code == op_code)
+    {
+        GATT_TRACE_DEBUG1("Conformance tst: forced err rspvofr ReadMultiple: error status=%d", gatt_cb.err_status);
+
+        STREAM_TO_UINT16(handle, p);
+
+        gatt_send_error_rsp (p_tcb, gatt_cb.err_status, gatt_cb.req_op_code, handle, FALSE);
+
+        return;
+    }
+#endif
+
+    while (ll >= 2 && p_tcb->sr_cmd.multi_req.num_handles < GATT_MAX_READ_MULTI_HANDLES)
+    {
+        STREAM_TO_UINT16(handle, p);
+
+        if ((i_rcb = gatt_sr_find_i_rcb_by_handle(handle)) < GATT_MAX_SR_PROFILES)
+        {
+            p_tcb->sr_cmd.multi_req.handles[p_tcb->sr_cmd.multi_req.num_handles++] = handle;
+
+            /* check read permission */
+            if ((err = gatts_read_attr_perm_check(   gatt_cb.sr_reg[i_rcb].p_db,
+                                                     FALSE,
+                                                     handle,
+                                                     sec_flag,
+                                                     key_size))
+                != GATT_SUCCESS)
+            {
+                GATT_TRACE_DEBUG1("read permission denied : 0x%02x", err);
+                break;
+            }
+        }
+        else
+        {
+            /* invalid handle */
+            err = GATT_INVALID_HANDLE;
+            break;
+        }
+        ll -= 2;
+    }
+
+    if (ll != 0)
+    {
+        GATT_TRACE_ERROR0("max attribute handle reached in ReadMultiple Request.");
+    }
+
+    if (p_tcb->sr_cmd.multi_req.num_handles == 0)
+        err = GATT_INVALID_HANDLE;
+
+    if (err == GATT_SUCCESS)
+    {
+        if ((trans_id = gatt_sr_enqueue_cmd (p_tcb, op_code, p_tcb->sr_cmd.multi_req.handles[0])) != 0)
+        {
+            gatt_sr_reset_cback_cnt(p_tcb); /* read multiple use multi_rsp_q's count*/
+
+            for (ll = 0; ll < p_tcb->sr_cmd.multi_req.num_handles; ll ++)
+            {
+                if ((p_msg = (tGATTS_RSP *)GKI_getbuf(sizeof(tGATTS_RSP))) != NULL)
+                {
+                    memset(p_msg, 0, sizeof(tGATTS_RSP))
+                    ;
+                    handle = p_tcb->sr_cmd.multi_req.handles[ll];
+                    i_rcb = gatt_sr_find_i_rcb_by_handle(handle);
+
+                    p_msg->attr_value.handle = handle;
+                    err = gatts_read_attr_value_by_handle(p_tcb,
+                                                          gatt_cb.sr_reg[i_rcb].p_db,
+                                                          op_code,
+                                                          handle,
+                                                          0,
+                                                          p_msg->attr_value.value,
+                                                          &p_msg->attr_value.len,
+                                                          GATT_MAX_ATTR_LEN,
+                                                          sec_flag,
+                                                          key_size,
+                                                          trans_id);
+
+                    if (err == GATT_SUCCESS)
+                    {
+                        gatt_sr_process_app_rsp(p_tcb, gatt_cb.sr_reg[i_rcb].gatt_if ,trans_id, op_code, GATT_SUCCESS, p_msg);
+                    }
+                    /* either not using or done using the buffer, release it now */
+                    GKI_freebuf(p_msg);
+                }
+                else
+                {
+                    err = GATT_NO_RESOURCES;
+                    gatt_dequeue_sr_cmd(p_tcb);
+                    break;
+                }
+            }
+        }
+        else
+            err = GATT_NO_RESOURCES;
+    }
+
+    /* in theroy BUSY is not possible(should already been checked), protected check */
+    if (err != GATT_SUCCESS && err != GATT_PENDING && err != GATT_BUSY)
+        gatt_send_error_rsp(p_tcb, err, op_code, handle, FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_build_primary_service_rsp
+**
+** Description      Primamry service request processed internally. Theretically
+**                  only deal with ReadByTypeVAlue and ReadByGroupType.
+**
+** Returns          void
+**
+*******************************************************************************/
+static tGATT_STATUS gatt_build_primary_service_rsp (BT_HDR *p_msg, tGATT_TCB *p_tcb,
+                                                    UINT8 op_code, UINT16 s_hdl,
+                                                    UINT16 e_hdl, UINT8 *p_data, tBT_UUID value)
+{
+    tGATT_STATUS    status = GATT_NOT_FOUND;
+    UINT8           handle_len =4, *p ;
+    tGATT_SR_REG    *p_rcb;
+    tGATT_SRV_LIST_INFO *p_list= &gatt_cb.srv_list_info;
+    tGATT_SRV_LIST_ELEM  *p_srv=NULL;
+    tBT_UUID       *p_uuid;
+
+    p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+
+    p_srv = p_list->p_first;
+
+    while (p_srv)
+    {
+        p_rcb = GATT_GET_SR_REG_PTR(p_srv->i_sreg);
+
+        if (p_rcb->in_use &&
+            p_rcb->s_hdl >= s_hdl &&
+            p_rcb->s_hdl <= e_hdl &&
+            p_rcb->type == GATT_UUID_PRI_SERVICE)
+        {
+            p_uuid = gatts_get_service_uuid (p_rcb->p_db);
+
+            if (op_code == GATT_REQ_READ_BY_GRP_TYPE)
+                handle_len = 4 + p_uuid->len;
+
+            /* get the length byte in the repsonse */
+            if (p_msg->offset ==0)
+            {
+                *p ++ = op_code + 1;
+                p_msg->len ++;
+                p_msg->offset = handle_len;
+
+                if (op_code == GATT_REQ_READ_BY_GRP_TYPE)
+                {
+                    *p ++ =  (UINT8)p_msg->offset; /* length byte */
+                    p_msg->len ++;
+                }
+            }
+
+            if (p_msg->len + p_msg->offset <= p_tcb->payload_size &&
+                handle_len == p_msg->offset)
+            {
+                if (op_code != GATT_REQ_FIND_TYPE_VALUE ||
+                    gatt_uuid_compare(value, *p_uuid))
+                {
+                    UINT16_TO_STREAM(p, p_rcb->s_hdl);
+
+                    if (p_list->p_last_primary == p_srv &&
+                        p_list->p_last_primary == p_list->p_last)
+                    {
+                        GATT_TRACE_DEBUG0("Use 0xFFFF for the last primary attribute");
+                        UINT16_TO_STREAM(p, 0xFFFF); /* see GATT ERRATA 4065, 4063, ATT ERRATA 4062 */
+                    }
+                    else
+                    {
+                        UINT16_TO_STREAM(p, p_rcb->e_hdl);
+                    }
+
+                    if (op_code == GATT_REQ_READ_BY_GRP_TYPE)
+                        gatt_build_uuid_to_stream(&p, *p_uuid);
+
+                    status = GATT_SUCCESS;
+                    p_msg->len += p_msg->offset;
+                }
+            }
+            else
+                break;
+        }
+        p_srv = p_srv->p_next;
+    }
+    p_msg->offset = L2CAP_MIN_OFFSET;
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_build_find_info_rsp
+**
+** Description      fill the find information response information in the given
+**                  buffer.
+**
+** Returns          TRUE: if data filled sucessfully.
+**                  FALSE: packet full, or format mismatch.
+**
+*******************************************************************************/
+static tGATT_STATUS gatt_build_find_info_rsp(tGATT_SR_REG *p_rcb, BT_HDR *p_msg, UINT16 *p_len,
+                                             UINT16 s_hdl, UINT16 e_hdl)
+{
+    tGATT_STATUS        status = GATT_NOT_FOUND;
+    UINT8               *p;
+    UINT16              len = *p_len;
+    tGATT_ATTR16        *p_attr = NULL;
+    UINT8               info_pair_len[2] = {4, 18};
+
+    if (!p_rcb->p_db || !p_rcb->p_db->p_attr_list)
+        return status;
+
+    /* check the attribute database */
+    p_attr = (tGATT_ATTR16 *) p_rcb->p_db->p_attr_list;
+
+    p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET + p_msg->len;
+
+    while (p_attr)
+    {
+        if (p_attr->handle > e_hdl)
+        {
+            break;
+        }
+
+        if (p_attr->handle >= s_hdl)
+        {
+            if (p_msg->offset == 0)
+                p_msg->offset = (p_attr->uuid_type == GATT_ATTR_UUID_TYPE_128) ? GATT_INFO_TYPE_PAIR_128 : GATT_INFO_TYPE_PAIR_16;
+
+            if (len >= info_pair_len[p_msg->offset - 1])
+            {
+                if (p_msg->offset == GATT_INFO_TYPE_PAIR_16 && p_attr->uuid_type == GATT_ATTR_UUID_TYPE_16)
+                {
+                    UINT16_TO_STREAM(p, p_attr->handle);
+                    UINT16_TO_STREAM(p, p_attr->uuid);
+                }
+                else if (p_msg->offset == GATT_INFO_TYPE_PAIR_128 &&
+                         p_attr->uuid_type == GATT_ATTR_UUID_TYPE_128  )
+                {
+                    UINT16_TO_STREAM(p, p_attr->handle);
+                    ARRAY_TO_STREAM (p, ((tGATT_ATTR128 *) p_attr)->uuid, LEN_UUID_128);
+                }
+                else
+                {
+                    GATT_TRACE_ERROR0("format mismatch");
+                    status = GATT_NO_RESOURCES;
+                    break;
+                    /* format mismatch */
+                }
+                p_msg->len += info_pair_len[p_msg->offset - 1];
+                len -= info_pair_len[p_msg->offset - 1];
+                status = GATT_SUCCESS;
+
+            }
+            else
+            {
+                status = GATT_NO_RESOURCES;
+                break;
+            }
+        }
+        p_attr = (tGATT_ATTR16 *)p_attr->p_next;
+    }
+
+    *p_len = len;
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_internal_read_by_type_req
+**
+** Description      check to see if the ReadByType request can be handled internally.
+**
+** Returns          void
+**
+*******************************************************************************/
+static tGATT_STATUS gatts_validate_packet_format(UINT8 op_code, UINT16 *p_len,
+                                                 UINT8 **p_data, tBT_UUID *p_uuid_filter,
+                                                 UINT16 *p_s_hdl, UINT16 *p_e_hdl)
+{
+    tGATT_STATUS    reason = GATT_SUCCESS;
+    UINT16          uuid_len, s_hdl = 0, e_hdl = 0;
+    UINT16          len = *p_len;
+    UINT8           *p = *p_data;
+
+    if (len >= 4)
+    {
+        /* obtain starting handle, and ending handle */
+        STREAM_TO_UINT16(s_hdl, p);
+        STREAM_TO_UINT16(e_hdl, p);
+        len -= 4;
+
+        if (s_hdl > e_hdl || !GATT_HANDLE_IS_VALID(s_hdl) || !GATT_HANDLE_IS_VALID(e_hdl))
+        {
+            reason = GATT_INVALID_HANDLE;
+        }
+        /* for these PDUs, uuid filter must present */
+        else if (op_code == GATT_REQ_READ_BY_GRP_TYPE ||
+                 op_code == GATT_REQ_FIND_TYPE_VALUE ||
+                 op_code == GATT_REQ_READ_BY_TYPE)
+        {
+            if (len >= 2 && p_uuid_filter != NULL)
+            {
+                uuid_len = (op_code == GATT_REQ_FIND_TYPE_VALUE) ? 2 : len;
+
+                /* parse uuid now */
+                if (gatt_parse_uuid_from_cmd (p_uuid_filter, uuid_len, &p) == FALSE ||
+                    p_uuid_filter->len == 0)
+                {
+                    GATT_TRACE_DEBUG0("UUID filter does not exsit");
+                    reason = GATT_INVALID_PDU;
+                }
+                else
+                    len -= p_uuid_filter->len;
+            }
+            else
+                reason = GATT_INVALID_PDU;
+        }
+    }
+
+    *p_data     = p;
+    *p_len      = len;
+    *p_s_hdl    = s_hdl;
+    *p_e_hdl    = e_hdl;
+
+    return reason;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_primary_service_req
+**
+** Description      process ReadByGroupType/ReadByTypeValue request, for discover
+**                  all primary services or discover primary service by UUID request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatts_process_primary_service_req(tGATT_TCB *p_tcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    UINT8           reason = GATT_INVALID_PDU;
+    UINT16          s_hdl = 0, e_hdl = 0;
+    tBT_UUID        uuid, value, primary_service = {LEN_UUID_16, {GATT_UUID_PRI_SERVICE}};
+    BT_HDR          *p_msg = NULL;
+    UINT16          msg_len = (UINT16)(sizeof(BT_HDR) + p_tcb->payload_size + L2CAP_MIN_OFFSET);
+
+    reason = gatts_validate_packet_format(op_code, &len, &p_data, &uuid, &s_hdl, &e_hdl);
+
+    if (reason == GATT_SUCCESS)
+    {
+        if (gatt_uuid_compare(uuid, primary_service))
+        {
+            if (op_code == GATT_REQ_FIND_TYPE_VALUE)
+            {
+                if (gatt_parse_uuid_from_cmd(&value, len, &p_data) == FALSE)
+                    reason = GATT_INVALID_PDU;
+            }
+
+            if (reason == GATT_SUCCESS)
+            {
+                if ((p_msg =  (BT_HDR *)GKI_getbuf(msg_len)) == NULL)
+                {
+                    GATT_TRACE_ERROR0("gatts_process_primary_service_req failed. no resources.");
+                    reason = GATT_NO_RESOURCES;
+                }
+                else
+                {
+                    memset(p_msg, 0, msg_len);
+                    reason = gatt_build_primary_service_rsp (p_msg, p_tcb, op_code, s_hdl, e_hdl, p_data, value);
+                }
+            }
+        }
+        else
+        {
+            if (op_code == GATT_REQ_READ_BY_GRP_TYPE)
+            {
+                reason = GATT_UNSUPPORT_GRP_TYPE;
+                GATT_TRACE_DEBUG1("unexpected ReadByGrpType Group: 0x%04x", uuid.uu.uuid16);
+            }
+            else
+            {
+                /* we do not support ReadByTypeValue with any non-primamry_service type */
+                reason = GATT_NOT_FOUND;
+                GATT_TRACE_DEBUG1("unexpected ReadByTypeValue type: 0x%04x", uuid.uu.uuid16);
+            }
+        }
+    }
+
+    if (reason != GATT_SUCCESS)
+    {
+        if (p_msg) GKI_freebuf(p_msg);
+        gatt_send_error_rsp (p_tcb, reason, op_code, s_hdl, FALSE);
+    }
+    else
+        attp_send_sr_msg(p_tcb, p_msg);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_find_info
+**
+** Description      process find information request, for discover character
+**                  descriptors.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_process_find_info(tGATT_TCB *p_tcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    UINT8           reason = GATT_INVALID_PDU, *p;
+    UINT16          s_hdl = 0, e_hdl = 0, buf_len;
+    BT_HDR          *p_msg = NULL;
+    tGATT_SR_REG    *p_rcb;
+    tGATT_SRV_LIST_INFO *p_list= &gatt_cb.srv_list_info;
+    tGATT_SRV_LIST_ELEM  *p_srv=NULL;
+
+    reason = gatts_validate_packet_format(op_code, &len, &p_data, NULL, &s_hdl, &e_hdl);
+
+    if (reason == GATT_SUCCESS)
+    {
+        buf_len = (UINT16)(sizeof(BT_HDR) + p_tcb->payload_size + L2CAP_MIN_OFFSET);
+
+        if ((p_msg =  (BT_HDR *)GKI_getbuf(buf_len)) == NULL)
+        {
+            reason = GATT_NO_RESOURCES;
+        }
+        else
+        {
+            reason = GATT_NOT_FOUND;
+
+            memset(p_msg, 0, buf_len);
+            p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+            *p ++ = op_code + 1;
+            p_msg->len = 2;
+
+            buf_len = p_tcb->payload_size - 2;
+
+            p_srv = p_list->p_first;
+
+            while (p_srv)
+            {
+                p_rcb = GATT_GET_SR_REG_PTR(p_srv->i_sreg);
+
+                if (p_rcb->in_use &&
+                    !(p_rcb->s_hdl > e_hdl ||
+                      p_rcb->e_hdl < s_hdl))
+                {
+                    reason = gatt_build_find_info_rsp(p_rcb, p_msg, &buf_len, s_hdl, e_hdl);
+                    if (reason == GATT_NO_RESOURCES)
+                    {
+                        reason = GATT_SUCCESS;
+                        break;
+                    }
+                }
+                p_srv = p_srv->p_next;
+            }
+            *p = (UINT8)p_msg->offset;
+
+            p_msg->offset = L2CAP_MIN_OFFSET;
+        }
+    }
+
+    if (reason != GATT_SUCCESS)
+    {
+        if (p_msg)  GKI_freebuf(p_msg);
+        gatt_send_error_rsp (p_tcb, reason, op_code, s_hdl, FALSE);
+    }
+    else
+        attp_send_sr_msg(p_tcb, p_msg);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_mtu_req
+**
+** Description      This function is called to process excahnge MTU request.
+**                  Only used on LE.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_process_mtu_req (tGATT_TCB *p_tcb, UINT16 len, UINT8 *p_data)
+{
+    UINT16        mtu = 0;
+    UINT8         *p = p_data, i;
+    BT_HDR        *p_buf;
+    UINT16   conn_id;
+
+    STREAM_TO_UINT16 (mtu, p);
+
+    /* BR/EDR conenction, send error response */
+    if (p_tcb->att_lcid != L2CAP_ATT_CID)
+    {
+        gatt_send_error_rsp (p_tcb, GATT_REQ_NOT_SUPPORTED, GATT_REQ_MTU, 0, FALSE);
+    }
+    else
+    {
+        /* mtu must be greater than default MTU which is 23/48 */
+        if (mtu <= GATT_MAX_MTU_SIZE)
+            p_tcb->payload_size = mtu;
+        else
+            p_tcb->payload_size = GATT_MAX_MTU_SIZE;
+
+        if ((p_buf = attp_build_sr_msg(p_tcb, GATT_RSP_MTU, (tGATT_SR_MSG *) &p_tcb->payload_size)) != NULL)
+        {
+            attp_send_sr_msg (p_tcb, p_buf);
+
+            /* Notify all registered applicaiton with new MTU size. Us a transaction ID */
+            /* of 0, as no response is allowed from applcations                    */
+
+            for (i = 0; i < GATT_MAX_APPS; i ++)
+            {
+                if (gatt_cb.cl_rcb[i].in_use )
+                {
+                    conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, gatt_cb.cl_rcb[i].gatt_if);
+                    gatt_sr_send_req_callback(conn_id, 0, GATTS_REQ_TYPE_MTU,
+                                              (tGATTS_DATA *)&p_tcb->payload_size);
+                }
+            }
+
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_read_by_type_req
+**
+** Description      process Read By type request.
+**                  This PDU can be used to perform:
+**                  - read characteristic value
+**                  - read characteristic descriptor value
+**                  - discover characteristic
+**                  - discover characteristic by UUID
+**                  - relationship discovery
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatts_process_read_by_type_req(tGATT_TCB *p_tcb, UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    tBT_UUID            uuid;
+    tGATT_SR_REG        *p_rcb;
+    UINT16              msg_len = (UINT16)(sizeof(BT_HDR) + p_tcb->payload_size + L2CAP_MIN_OFFSET),
+                                  buf_len,
+                                  s_hdl, e_hdl, err_hdl = 0;
+    BT_HDR              *p_msg = NULL;
+    tGATT_STATUS        reason, ret;
+    UINT8               *p;
+    UINT8               sec_flag, key_size;
+    tGATT_SRV_LIST_INFO *p_list= &gatt_cb.srv_list_info;
+    tGATT_SRV_LIST_ELEM  *p_srv=NULL;
+
+    reason = gatts_validate_packet_format(op_code, &len, &p_data, &uuid, &s_hdl, &e_hdl);
+
+#if GATT_CONFORMANCE_TESTING == TRUE
+    if (gatt_cb.enable_err_rsp && gatt_cb.req_op_code == op_code)
+    {
+        GATT_TRACE_DEBUG1("Conformance tst: forced err rsp for ReadByType: error status=%d", gatt_cb.err_status);
+
+        gatt_send_error_rsp (p_tcb, gatt_cb.err_status, gatt_cb.req_op_code, s_hdl, FALSE);
+
+        return;
+    }
+#endif
+
+    if (reason == GATT_SUCCESS)
+    {
+        if ((p_msg =  (BT_HDR *)GKI_getbuf(msg_len)) == NULL)
+        {
+            GATT_TRACE_ERROR0("gatts_process_find_info failed. no resources.");
+
+            reason = GATT_NO_RESOURCES;
+        }
+        else
+        {
+            memset(p_msg, 0, msg_len);
+            p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+
+            *p ++ = op_code + 1;
+            /* reserve length byte */
+            p_msg->len = 2;
+            buf_len = p_tcb->payload_size - 2;
+
+            reason = GATT_NOT_FOUND;
+
+            p_srv = p_list->p_first;
+
+            while (p_srv)
+            {
+                p_rcb = GATT_GET_SR_REG_PTR(p_srv->i_sreg);
+
+                if (p_rcb->in_use &&
+                    !(p_rcb->s_hdl > e_hdl ||
+                      p_rcb->e_hdl < s_hdl))
+                {
+                    gatt_sr_get_sec_info(p_tcb->peer_bda,
+                                         (BOOLEAN)(p_tcb->att_lcid == L2CAP_ATT_CID),
+                                         &sec_flag,
+                                         &key_size);
+
+                    ret = gatts_db_read_attr_value_by_type(p_tcb,
+                                                           p_rcb->p_db,
+                                                           op_code,
+                                                           p_msg,
+                                                           s_hdl,
+                                                           e_hdl,
+                                                           uuid,
+                                                           &buf_len,
+                                                           sec_flag,
+                                                           key_size,
+                                                           0,
+                                                           &err_hdl);
+                    if (ret != GATT_NOT_FOUND)
+                    {
+                        reason = ret;
+
+                        if (ret == GATT_NO_RESOURCES)
+                            reason = GATT_SUCCESS;
+                    }
+                    if (ret != GATT_SUCCESS && ret != GATT_NOT_FOUND)
+                    {
+                        s_hdl = err_hdl;
+                        break;
+                    }
+                }
+                p_srv = p_srv->p_next;
+            }
+            *p              = (UINT8)p_msg->offset;
+            p_msg->offset   = L2CAP_MIN_OFFSET;
+        }
+    }
+    if (reason != GATT_SUCCESS)
+    {
+        if (p_msg)  GKI_freebuf(p_msg);
+
+        /* in theroy BUSY is not possible(should already been checked), protected check */
+        if (reason != GATT_PENDING && reason != GATT_BUSY)
+            gatt_send_error_rsp (p_tcb, reason, op_code, s_hdl, FALSE);
+    }
+    else
+        attp_send_sr_msg(p_tcb, p_msg);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_write_req
+**
+** Description      This function is called to process the write request
+**                  from client.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatts_process_write_req (tGATT_TCB *p_tcb, UINT8 i_rcb, UINT16 handle,
+                              UINT8 op_code, UINT16 len, UINT8 *p_data)
+{
+    tGATTS_DATA     sr_data;
+    UINT32          trans_id;
+    tGATT_STATUS    status;
+    UINT8           sec_flag, key_size, *p = p_data;
+    tGATT_SR_REG    *p_sreg;
+    UINT16          conn_id;
+
+    memset(&sr_data, 0, sizeof(tGATTS_DATA));
+
+    switch (op_code)
+    {
+        case GATT_REQ_PREPARE_WRITE:
+            sr_data.write_req.is_prep = TRUE;
+            STREAM_TO_UINT16(sr_data.write_req.offset, p);
+            len -= 2;
+            /* fall through */
+        case GATT_SIGN_CMD_WRITE:
+            if (op_code == GATT_SIGN_CMD_WRITE)
+            {
+                GATT_TRACE_DEBUG0("Write CMD with data sigining" );
+                len -= GATT_AUTH_SIGN_LEN;
+            }
+            /* fall through */
+        case GATT_CMD_WRITE:
+        case GATT_REQ_WRITE:
+            if (op_code == GATT_REQ_WRITE || op_code == GATT_REQ_PREPARE_WRITE)
+                sr_data.write_req.need_rsp = TRUE;
+            sr_data.write_req.handle = handle;
+            sr_data.write_req.len = len;
+            memcpy (sr_data.write_req.value, p, len);
+            break;
+    }
+
+    gatt_sr_get_sec_info(p_tcb->peer_bda,
+                         (BOOLEAN)(p_tcb->att_lcid == L2CAP_ATT_CID),
+                         &sec_flag,
+                         &key_size);
+
+    status = gatts_write_attr_perm_check (gatt_cb.sr_reg[i_rcb].p_db,
+                                          op_code,
+                                          handle,
+                                          sr_data.write_req.offset,
+                                          p,
+                                          len,
+                                          sec_flag,
+                                          key_size);
+
+    if (status == GATT_SUCCESS)
+    {
+        if ((trans_id = gatt_sr_enqueue_cmd(p_tcb, op_code, handle)) != 0)
+        {
+            p_sreg = &gatt_cb.sr_reg[i_rcb];
+            conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_sreg->gatt_if);
+            gatt_sr_send_req_callback(conn_id,
+                                      trans_id,
+                                      GATTS_REQ_TYPE_WRITE,
+                                      &sr_data);
+
+            status = GATT_PENDING;
+        }
+        else
+        {
+            GATT_TRACE_ERROR0("max pending command, send error");
+            status = GATT_BUSY; /* max pending command, application error */
+        }
+    }
+
+    /* in theroy BUSY is not possible(should already been checked), protected check */
+    if (status != GATT_PENDING && status != GATT_BUSY &&
+        (op_code == GATT_REQ_PREPARE_WRITE || op_code == GATT_REQ_WRITE))
+    {
+        gatt_send_error_rsp (p_tcb, status, op_code, handle, FALSE);
+    }
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_read_req
+**
+** Description      This function is called to process the read request
+**                  from client.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_process_read_req(tGATT_TCB *p_tcb, tGATT_SR_REG *p_rcb, UINT8 op_code,
+                                   UINT16 handle, UINT16 len, UINT8 *p_data)
+{
+    UINT16          buf_len = (UINT16)(sizeof(BT_HDR) + p_tcb->payload_size + L2CAP_MIN_OFFSET);
+    tGATT_STATUS    reason;
+    BT_HDR          *p_msg = NULL;
+    UINT8           sec_flag, key_size, *p;
+    UINT16          offset = 0, value_len = 0;
+
+    if ((p_msg =  (BT_HDR *)GKI_getbuf(buf_len)) == NULL)
+    {
+        GATT_TRACE_ERROR0("gatts_process_find_info failed. no resources.");
+
+        reason = GATT_NO_RESOURCES;
+    }
+    else
+    {
+        if (op_code == GATT_REQ_READ_BLOB)
+            STREAM_TO_UINT16(offset, p_data);
+
+        memset(p_msg, 0, buf_len);
+        p = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+        *p ++ = op_code + 1;
+        p_msg->len = 1;
+        buf_len = p_tcb->payload_size - 1;
+
+        gatt_sr_get_sec_info(p_tcb->peer_bda,
+                             (BOOLEAN)(p_tcb->att_lcid == L2CAP_ATT_CID),
+                             &sec_flag,
+                             &key_size);
+
+        reason = gatts_read_attr_value_by_handle(p_tcb,
+                                                 p_rcb->p_db,
+                                                 op_code,
+                                                 handle,
+                                                 offset,
+                                                 p,
+                                                 &value_len,
+                                                 buf_len,
+                                                 sec_flag,
+                                                 key_size,
+                                                 0);
+
+        p_msg->len += value_len;
+    }
+
+    if (reason != GATT_SUCCESS)
+    {
+        if (p_msg)  GKI_freebuf(p_msg);
+
+        /* in theroy BUSY is not possible(should already been checked), protected check */
+        if (reason != GATT_PENDING && reason != GATT_BUSY)
+            gatt_send_error_rsp (p_tcb, reason, op_code, handle, FALSE);
+    }
+    else
+        attp_send_sr_msg(p_tcb, p_msg);
+
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_attribute_req
+**
+** Description      This function is called to process the per attribute handle request
+**                  from client.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatts_process_attribute_req (tGATT_TCB *p_tcb, UINT8 op_code,
+                                  UINT16 len, UINT8 *p_data)
+{
+    UINT16          handle;
+    UINT8           *p = p_data, i;
+    tGATT_SR_REG    *p_rcb = gatt_cb.sr_reg;
+    tGATT_STATUS    status = GATT_INVALID_HANDLE;
+    tGATT_ATTR16    *p_attr;
+
+    STREAM_TO_UINT16(handle, p);
+    len -= 2;
+
+#if GATT_CONFORMANCE_TESTING == TRUE
+    if (gatt_cb.enable_err_rsp && gatt_cb.req_op_code == op_code)
+    {
+        GATT_TRACE_DEBUG1("Conformance tst: forced err rsp: error status=%d", gatt_cb.err_status);
+
+        gatt_send_error_rsp (p_tcb, gatt_cb.err_status, gatt_cb.req_op_code, handle, FALSE);
+
+        return;
+    }
+#endif
+
+    if (GATT_HANDLE_IS_VALID(handle))
+    {
+        for (i = 0; i < GATT_MAX_SR_PROFILES; i ++, p_rcb ++)
+        {
+            if (p_rcb->in_use && p_rcb->s_hdl <= handle && p_rcb->e_hdl >= handle)
+            {
+                p_attr = (tGATT_ATTR16 *)p_rcb->p_db->p_attr_list;
+
+                while (p_attr)
+                {
+                    if (p_attr->handle == handle)
+                    {
+                        switch (op_code)
+                        {
+                            case GATT_REQ_READ: /* read char/char descriptor value */
+                            case GATT_REQ_READ_BLOB:
+                                gatts_process_read_req(p_tcb, p_rcb, op_code, handle, len, p);
+                                break;
+
+                            case GATT_REQ_WRITE: /* write char/char descriptor value */
+                            case GATT_CMD_WRITE:
+                            case GATT_SIGN_CMD_WRITE:
+                            case GATT_REQ_PREPARE_WRITE:
+                                gatts_process_write_req(p_tcb, i, handle, op_code, len, p);
+                                break;
+                            default:
+                                break;
+                        }
+                        status = GATT_SUCCESS;
+                        break;
+                    }
+                    p_attr = (tGATT_ATTR16 *)p_attr->p_next;
+                }
+                break;
+            }
+        }
+    }
+
+    if (status != GATT_SUCCESS && op_code != GATT_CMD_WRITE && op_code != GATT_SIGN_CMD_WRITE)
+        gatt_send_error_rsp (p_tcb, status, op_code, handle, FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         gatts_proc_srv_chg_ind_ack
+**
+** Description      This function process the service changed indicaiton ACK
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_proc_srv_chg_ind_ack(tGATT_TCB *p_tcb )
+{
+    tGATTS_SRV_CHG_REQ  req;
+    tGATTS_SRV_CHG      *p_buf = NULL;
+
+    GATT_TRACE_DEBUG0("gatts_proc_srv_chg_ind_ack");
+
+    if ((p_buf = gatt_is_bda_in_the_srv_chg_clt_list(p_tcb->peer_bda)) != NULL)
+    {
+        GATT_TRACE_DEBUG0("NV update set srv chg = FALSE");
+        p_buf->srv_changed = FALSE;
+        memcpy(&req.srv_chg, p_buf, sizeof(tGATTS_SRV_CHG));
+        if (gatt_cb.cb_info.p_srv_chg_callback)
+            (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_UPDATE_CLIENT,&req, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatts_chk_pending_ind
+**
+** Description      This function check any pending indication needs to be sent if
+**                  there is a pending indication then sent the indication
+**
+** Returns          void
+**
+*******************************************************************************/
+static void gatts_chk_pending_ind(tGATT_TCB *p_tcb )
+{
+    tGATT_VALUE *p_buf = (tGATT_VALUE *)GKI_getfirst(&p_tcb->pending_ind_q);
+    GATT_TRACE_DEBUG0("gatts_chk_pending_ind");
+
+    if (p_buf )
+    {
+        GATTS_HandleValueIndication (p_buf->conn_id,
+                                     p_buf->handle,
+                                     p_buf->len,
+                                     p_buf->value);
+        GKI_freebuf(GKI_remove_from_queue (&p_tcb->pending_ind_q, p_buf));
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatts_proc_ind_ack
+**
+** Description      This function process the Indication ack
+**
+** Returns          TRUE continue to process the indication ack by the aaplication
+**                  if the ACk is not a Service Changed Indication Ack
+**
+*******************************************************************************/
+static BOOLEAN gatts_proc_ind_ack(tGATT_TCB *p_tcb, UINT16 ack_handle)
+{
+    BOOLEAN continue_processing = TRUE;
+
+    GATT_TRACE_DEBUG1 ("gatts_proc_ind_ack ack handle=%d", ack_handle);
+
+    if (ack_handle == gatt_cb.handle_of_h_r)
+    {
+        gatts_proc_srv_chg_ind_ack(p_tcb);
+        /* there is no need to inform the application since srv chg is handled internally by GATT */
+        continue_processing = FALSE;
+    }
+
+    gatts_chk_pending_ind(p_tcb);
+    return continue_processing;
+}
+
+/*******************************************************************************
+**
+** Function         gatts_process_value_conf
+**
+** Description      This function is called to process the handle value confirmation.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatts_process_value_conf(tGATT_TCB *p_tcb, UINT8 op_code)
+{
+    UINT16          handle = p_tcb->indicate_handle;
+    UINT32          trans_id;
+    UINT8           i;
+    tGATT_SR_REG    *p_rcb = gatt_cb.sr_reg;
+    BOOLEAN         continue_processing;
+    UINT16          conn_id;
+
+    btu_stop_timer (&p_tcb->conf_timer_ent);
+    if (GATT_HANDLE_IS_VALID(handle))
+    {
+        p_tcb->indicate_handle = 0;
+        continue_processing = gatts_proc_ind_ack(p_tcb, handle);
+
+        if (continue_processing)
+        {
+            for (i = 0; i < GATT_MAX_SR_PROFILES; i ++, p_rcb ++)
+            {
+                if (p_rcb->in_use && p_rcb->s_hdl <= handle && p_rcb->e_hdl >= handle)
+                {
+                    trans_id = gatt_sr_enqueue_cmd(p_tcb, op_code, handle);
+                    conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_rcb->gatt_if);
+                    gatt_sr_send_req_callback(conn_id,
+                                              trans_id, GATTS_REQ_TYPE_CONF, (tGATTS_DATA *)&handle);
+                }
+            }
+        }
+    }
+    else
+    {
+        GATT_TRACE_ERROR0("unexpected handle value confirmation");
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_server_handle_client_req
+**
+** Description      This function is called to handle the client requests to
+**                  server.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_server_handle_client_req (tGATT_TCB *p_tcb, UINT8 op_code,
+                                    UINT16 len, UINT8 *p_data)
+{
+    /* there is pending command, discard this one */
+    if (!gatt_sr_cmd_empty(p_tcb) && op_code != GATT_HANDLE_VALUE_CONF)
+        return;
+
+    /* the size of the message may not be bigger than the local max PDU size*/
+    /* The message has to be smaller than the agreed MTU, len does not include op code */
+    if (len >= p_tcb->payload_size)
+    {
+        GATT_TRACE_ERROR2("server receive invalid PDU size:%d pdu size:%d", len + 1, p_tcb->payload_size );
+        /* for invalid request expecting response, send it now */
+        if (op_code != GATT_CMD_WRITE &&
+            op_code != GATT_SIGN_CMD_WRITE &&
+            op_code != GATT_HANDLE_VALUE_CONF)
+        {
+            gatt_send_error_rsp (p_tcb, GATT_INVALID_PDU, op_code, 0, FALSE);
+        }
+        /* otherwise, ignore the pkt */
+    }
+    else
+    {
+        switch (op_code)
+        {
+            case GATT_REQ_READ_BY_GRP_TYPE: /* discover primary services */
+            case GATT_REQ_FIND_TYPE_VALUE: /* discover service by UUID */
+                gatts_process_primary_service_req (p_tcb, op_code, len, p_data);
+                break;
+
+            case GATT_REQ_FIND_INFO:/* discover char descrptor */
+                gatts_process_find_info(p_tcb, op_code, len, p_data);
+                break;
+
+            case GATT_REQ_READ_BY_TYPE: /* read characteristic value, char descriptor value */
+                /* discover characteristic, discover char by UUID */
+                gatts_process_read_by_type_req(p_tcb, op_code, len, p_data);
+                break;
+
+
+            case GATT_REQ_READ: /* read char/char descriptor value */
+            case GATT_REQ_READ_BLOB:
+            case GATT_REQ_WRITE: /* write char/char descriptor value */
+            case GATT_CMD_WRITE:
+            case GATT_SIGN_CMD_WRITE:
+            case GATT_REQ_PREPARE_WRITE:
+                gatts_process_attribute_req (p_tcb, op_code, len, p_data);
+                break;
+
+            case GATT_HANDLE_VALUE_CONF:
+                gatts_process_value_conf (p_tcb, op_code);
+                break;
+
+            case GATT_REQ_MTU:
+                gatts_process_mtu_req (p_tcb, len, p_data);
+                break;
+
+            case GATT_REQ_EXEC_WRITE:
+                gatt_process_exec_write_req (p_tcb, op_code, len, p_data);
+                break;
+
+            case GATT_REQ_READ_MULTI:
+                gatt_process_read_multi_req (p_tcb, op_code, len, p_data);
+                break;
+
+            default:
+                break;
+        }
+    }
+}
+
+#endif /* BLE_INCLUDED */
diff --git a/stack/gatt/gatt_utils.c b/stack/gatt/gatt_utils.c
new file mode 100644
index 0000000..bd3aaf6
--- /dev/null
+++ b/stack/gatt/gatt_utils.c
@@ -0,0 +1,2600 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains GATT utility functions
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+
+#if BLE_INCLUDED == TRUE
+    #include <string.h>
+    #include "stdio.h"
+    #include "gki.h"
+
+    #include "l2cdefs.h"
+    #include "gatt_int.h"
+    #include "gatt_api.h"
+    #include "gattdefs.h"
+    #include "sdp_api.h"
+    #include "btm_int.h"
+/* check if [x, y] and [a, b] have overlapping range */
+    #define GATT_VALIDATE_HANDLE_RANGE(x, y, a, b)   (y >= a && x <= b)
+
+    #define GATT_GET_NEXT_VALID_HANDLE(x)    (((x)/10 + 1) * 10)
+
+const char * const op_code_name[] =
+{
+    "UNKNOWN",
+    "ATT_RSP_ERROR",
+    "ATT_REQ_MTU",
+    "ATT_RSP_MTU",
+    "ATT_REQ_READ_INFO",
+    "ATT_RSP_READ_INFO",
+    "ATT_REQ_FIND_TYPE_VALUE",
+    "ATT_RSP_FIND_TYPE_VALUE",
+    "ATT_REQ_READ_BY_TYPE",
+    "ATT_RSP_READ_BY_TYPE",
+    "ATT_REQ_READ",
+    "ATT_RSP_READ",
+    "ATT_REQ_READ_BLOB",
+    "ATT_RSP_READ_BLOB",
+    "GATT_REQ_READ_MULTI",
+    "GATT_RSP_READ_MULTI",
+    "GATT_REQ_READ_BY_GRP_TYPE",
+    "GATT_RSP_READ_BY_GRP_TYPE",
+    "ATT_REQ_WRITE",
+    "ATT_RSP_WRITE",
+    "ATT_CMD_WRITE",
+    "ATT_SIGN_CMD_WRITE",
+    "ATT_REQ_PREPARE_WRITE",
+    "ATT_RSP_PREPARE_WRITE",
+    "ATT_REQ_EXEC_WRITE",
+    "ATT_RSP_EXEC_WRITE",
+    "Reserved",
+    "ATT_HANDLE_VALUE_NOTIF",
+    "Reserved",
+    "ATT_HANDLE_VALUE_IND",
+    "ATT_HANDLE_VALUE_CONF",
+    "ATT_OP_CODE_MAX"
+};
+
+static const UINT8  base_uuid[LEN_UUID_128] = {0xFB, 0x34, 0x9B, 0x5F, 0x80, 0x00, 0x00, 0x80,
+    0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+
+/*******************************************************************************
+**
+** Function         gatt_free_pending_ind
+**
+** Description    Free all pending indications
+**
+** Returns       None
+**
+*******************************************************************************/
+void gatt_free_pending_ind(tGATT_TCB *p_tcb)
+{
+    GATT_TRACE_DEBUG0("gatt_free_pending_ind");
+    /* release all queued indications */
+    while (p_tcb->pending_ind_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_tcb->pending_ind_q));
+}
+
+/*******************************************************************************
+**
+** Function         gatt_delete_dev_from_srv_chg_clt_list
+**
+** Description    Delete a device from the service changed client lit
+**
+** Returns       None
+**
+*******************************************************************************/
+void gatt_delete_dev_from_srv_chg_clt_list(BD_ADDR bd_addr)
+{
+    tGATTS_SRV_CHG     *p_buf;
+    tGATTS_SRV_CHG_REQ  req;
+
+    GATT_TRACE_DEBUG0 ("gatt_delete_dev_from_srv_chg_clt_list");
+    if ((p_buf = gatt_is_bda_in_the_srv_chg_clt_list(bd_addr)) != NULL)
+    {
+        if (gatt_cb.cb_info.p_srv_chg_callback)
+        {
+            /* delete from NV */
+            memcpy(req.srv_chg.bda, bd_addr, BD_ADDR_LEN);
+            (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_REMOVE_CLIENT,&req, NULL);
+        }
+        GKI_freebuf (GKI_remove_from_queue (&gatt_cb.srv_chg_clt_q, p_buf));
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_set_srv_chg
+**
+** Description      Set the service changed flag to TRUE
+**
+** Returns        None
+**
+*******************************************************************************/
+void gatt_set_srv_chg(void)
+{
+    tGATTS_SRV_CHG *p_buf = (tGATTS_SRV_CHG *)GKI_getfirst(&gatt_cb.srv_chg_clt_q);
+    tGATTS_SRV_CHG_REQ req;
+
+    GATT_TRACE_DEBUG0 ("gatt_set_srv_chg");
+    while (p_buf)
+    {
+        GATT_TRACE_DEBUG0 ("found a srv_chg clt");
+        if (!p_buf->srv_changed)
+        {
+            GATT_TRACE_DEBUG0 ("set srv_changed to TRUE");
+            p_buf->srv_changed= TRUE;
+            memcpy(&req.srv_chg, p_buf, sizeof(tGATTS_SRV_CHG));
+            if (gatt_cb.cb_info.p_srv_chg_callback)
+                (*gatt_cb.cb_info.p_srv_chg_callback)(GATTS_SRV_CHG_CMD_UPDATE_CLIENT,&req, NULL);
+        }
+        p_buf = (tGATTS_SRV_CHG *)GKI_getnext(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_is_new_srv_chg
+**
+** Description     Find the app id in on the new service changed list
+**
+** Returns     Pointer to the found new service changed item othwerwise NULL
+**
+*******************************************************************************/
+tGATTS_PENDING_NEW_SRV_START *gatt_sr_is_new_srv_chg(tBT_UUID *p_app_uuid128, tBT_UUID *p_svc_uuid, UINT16 svc_inst)
+{
+    tGATTS_HNDL_RANGE *p;
+    tGATTS_PENDING_NEW_SRV_START *p_buf = (tGATTS_PENDING_NEW_SRV_START *)GKI_getfirst(&gatt_cb.pending_new_srv_start_q);
+
+    while (p_buf != NULL)
+    {
+        p = p_buf->p_new_srv_start;
+        if (  gatt_uuid_compare (*p_app_uuid128, p->app_uuid128)
+              &&  gatt_uuid_compare (*p_svc_uuid, p->svc_uuid)
+              &&  (svc_inst == p->svc_inst) )
+        {
+            GATT_TRACE_DEBUG0 ("gatt_sr_is_new_srv_chg: Yes");
+            break;
+        }
+        p_buf = (tGATTS_PENDING_NEW_SRV_START *)GKI_getnext(p_buf);
+    }
+
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function     gatt_add_pending_ind
+**
+** Description  Add a pending indication
+**
+** Returns    Pointer to the current pending indication buffer, NULL no buffer available
+**
+*******************************************************************************/
+tGATT_VALUE *gatt_add_pending_ind(tGATT_TCB  *p_tcb, tGATT_VALUE *p_ind)
+{
+    tGATT_VALUE   *p_buf;
+    GATT_TRACE_DEBUG0 ("gatt_add_pending_ind");
+    if ((p_buf = (tGATT_VALUE *)GKI_getbuf((UINT16)sizeof(tGATT_VALUE))) != NULL)
+    {
+        GATT_TRACE_DEBUG0 ("enqueue a pending indication");
+        memcpy(p_buf, p_ind, sizeof(tGATT_VALUE));
+        GKI_enqueue (&p_tcb->pending_ind_q, p_buf);
+    }
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function     gatt_add_pending_new_srv_start
+**
+** Description  Add a pending new srv start to the new service start queue
+**
+** Returns    Pointer to the new service start buffer, NULL no buffer available
+**
+*******************************************************************************/
+tGATTS_PENDING_NEW_SRV_START *gatt_add_pending_new_srv_start(tGATTS_HNDL_RANGE *p_new_srv_start)
+{
+    tGATTS_PENDING_NEW_SRV_START   *p_buf;
+
+    GATT_TRACE_DEBUG0 ("gatt_add_pending_new_srv_start");
+    if ((p_buf = (tGATTS_PENDING_NEW_SRV_START *)GKI_getbuf((UINT16)sizeof(tGATTS_PENDING_NEW_SRV_START))) != NULL)
+    {
+        GATT_TRACE_DEBUG0 ("enqueue a new pending new srv start");
+        p_buf->p_new_srv_start = p_new_srv_start;
+        GKI_enqueue (&gatt_cb.pending_new_srv_start_q, p_buf);
+    }
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function     gatt_add_srv_chg_clt
+**
+** Description  Add a service chnage client to the service change client queue
+**
+** Returns    Pointer to the service change client buffer; Null no buffer available
+**
+*******************************************************************************/
+tGATTS_SRV_CHG *gatt_add_srv_chg_clt(tGATTS_SRV_CHG *p_srv_chg)
+{
+    tGATTS_SRV_CHG *p_buf;
+    GATT_TRACE_DEBUG0 ("gatt_add_srv_chg_clt");
+    if ((p_buf = (tGATTS_SRV_CHG *)GKI_getbuf((UINT16)sizeof(tGATTS_SRV_CHG))) != NULL)
+    {
+        GATT_TRACE_DEBUG0 ("enqueue a srv chg client");
+        memcpy(p_buf, p_srv_chg, sizeof(tGATTS_SRV_CHG));
+        GKI_enqueue (&gatt_cb.srv_chg_clt_q, p_buf);
+    }
+
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function     gatt_alloc_hdl_buffer
+**
+** Description  Allocate a handle buufer
+**
+** Returns    Pointer to the allocated buffer, NULL no buffer available
+**
+*******************************************************************************/
+tGATT_HDL_LIST_ELEM *gatt_alloc_hdl_buffer(void)
+{
+    UINT8 i;
+    tGATT_CB    *p_cb = &gatt_cb;
+    tGATT_HDL_LIST_ELEM * p_elem= &p_cb->hdl_list[0];
+
+    for (i = 0; i < GATT_MAX_SR_PROFILES; i++, p_elem ++)
+    {
+        if (!p_cb->hdl_list[i].in_use)
+        {
+            memset(p_elem, 0, sizeof(tGATT_HDL_LIST_ELEM));
+            p_elem->in_use = TRUE;
+            return p_elem;
+        }
+    }
+
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function     gatt_find_hdl_buffer_by_handle
+**
+** Description  Find handle range buffer by service handle.
+**
+** Returns    Pointer to the buffer, NULL no buffer available
+**
+*******************************************************************************/
+tGATT_HDL_LIST_ELEM *gatt_find_hdl_buffer_by_handle(UINT16 handle)
+{
+    tGATT_HDL_LIST_INFO *p_list_info= &gatt_cb.hdl_list_info;
+    tGATT_HDL_LIST_ELEM      *p_list = NULL;
+
+    p_list = p_list_info->p_first;
+
+    while (p_list != NULL)
+    {
+        if (p_list->in_use && p_list->asgn_range.s_handle == handle)
+        {
+            return(p_list);
+        }
+        p_list = p_list->p_next;
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function     gatt_find_hdl_buffer_by_app_id
+**
+** Description  Find handle range buffer by app ID, service and service instance ID.
+**
+** Returns    Pointer to the buffer, NULL no buffer available
+**
+*******************************************************************************/
+tGATT_HDL_LIST_ELEM *gatt_find_hdl_buffer_by_app_id (tBT_UUID *p_app_uuid128,
+                                                     tBT_UUID *p_svc_uuid,
+                                                     UINT16 svc_inst)
+{
+    tGATT_HDL_LIST_INFO *p_list_info= &gatt_cb.hdl_list_info;
+    tGATT_HDL_LIST_ELEM      *p_list = NULL;
+
+    p_list = p_list_info->p_first;
+
+    while (p_list != NULL)
+    {
+        if ( gatt_uuid_compare (*p_app_uuid128, p_list->asgn_range.app_uuid128)
+             &&  gatt_uuid_compare (*p_svc_uuid,    p_list->asgn_range.svc_uuid)
+             &&  (svc_inst == p_list->asgn_range.svc_inst) )
+        {
+            GATT_TRACE_DEBUG0 ("Already allocated handles for this service before!!");
+            return(p_list);
+        }
+        p_list = p_list->p_next;
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         gatt_free_hdl_buffer
+**
+** Description     free a handle buffer
+**
+** Returns       None
+**
+*******************************************************************************/
+void gatt_free_hdl_buffer(tGATT_HDL_LIST_ELEM *p)
+{
+
+    if (p)
+    {
+        while (p->svc_db.svc_buffer.p_first)
+            GKI_freebuf (GKI_dequeue (&p->svc_db.svc_buffer));
+        memset(p, 0, sizeof(tGATT_HDL_LIST_ELEM));
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_free_srvc_db_buffer_app_id
+**
+** Description      free the service attribute database buffers by the owner of the
+**                  service app ID.
+**
+** Returns       None
+**
+*******************************************************************************/
+void gatt_free_srvc_db_buffer_app_id(tBT_UUID *p_app_id)
+{
+    tGATT_HDL_LIST_ELEM *p_elem =  &gatt_cb.hdl_list[0];
+    UINT8   i;
+
+    for (i = 0; i < GATT_MAX_SR_PROFILES; i ++, p_elem ++)
+    {
+        if (memcmp(p_app_id, &p_elem->asgn_range.app_uuid128, sizeof(tBT_UUID)) == 0)
+        {
+            while (p_elem->svc_db.svc_buffer.p_first)
+                GKI_freebuf (GKI_dequeue (&p_elem->svc_db.svc_buffer));
+
+            p_elem->svc_db.mem_free = 0;
+            p_elem->svc_db.p_attr_list = p_elem->svc_db.p_free_mem = NULL;
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_is_last_attribute
+**
+** Description     Check this is the last attribute of the specified value or not
+**
+** Returns       TRUE - yes this is the last attribute
+**
+*******************************************************************************/
+BOOLEAN gatt_is_last_attribute(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_start, tBT_UUID value)
+{
+    tGATT_SRV_LIST_ELEM *p_srv= p_start->p_next;
+    BOOLEAN              is_last_attribute = TRUE;
+    tGATT_SR_REG        *p_rcb = NULL;
+    tBT_UUID            *p_svc_uuid;
+
+    p_list->p_last_primary = NULL;
+
+    while (p_srv)
+    {
+        p_rcb = GATT_GET_SR_REG_PTR(p_srv->i_sreg);
+
+        p_svc_uuid = gatts_get_service_uuid (p_rcb->p_db);
+
+        if (gatt_uuid_compare(value, *p_svc_uuid))
+        {
+            is_last_attribute = FALSE;
+            break;
+
+        }
+        p_srv = p_srv->p_next;
+    }
+
+    return is_last_attribute;
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_update_last_pri_srv_info
+**
+** Description     Update the the last primary info for the service list info
+**
+** Returns       None
+**
+*******************************************************************************/
+void gatt_update_last_pri_srv_info(tGATT_SRV_LIST_INFO *p_list)
+{
+    tGATT_SRV_LIST_ELEM *p_srv= p_list->p_first;
+
+    p_list->p_last_primary = NULL;
+
+    while (p_srv)
+    {
+        if (p_srv->is_primary)
+        {
+            p_list->p_last_primary = p_srv;
+        }
+        p_srv = p_srv->p_next;
+    }
+
+}
+/*******************************************************************************
+**
+** Function         gatts_update_srv_list_elem
+**
+** Description      update an element in the service list.
+**
+** Returns          None.
+**
+*******************************************************************************/
+void gatts_update_srv_list_elem(UINT8 i_sreg, UINT16 handle, BOOLEAN is_primary)
+{
+    gatt_cb.srv_list[i_sreg].in_use         = TRUE;
+    gatt_cb.srv_list[i_sreg].i_sreg    = i_sreg;
+    gatt_cb.srv_list[i_sreg].s_hdl          = gatt_cb.sr_reg[i_sreg].s_hdl;
+    gatt_cb.srv_list[i_sreg].is_primary     = is_primary;
+
+    return;
+}
+/*******************************************************************************
+**
+** Function  gatt_add_a_srv_to_list
+**
+** Description  add an service to the list in ascending
+**              order of the start handle
+**
+** Returns   BOOLEAN TRUE-if add is successful
+**
+*******************************************************************************/
+BOOLEAN gatt_add_a_srv_to_list(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_new)
+{
+    tGATT_SRV_LIST_ELEM *p_old;
+
+    if (!p_new)
+    {
+        GATT_TRACE_DEBUG0("p_new==NULL");
+        return FALSE;
+    }
+
+    if (!p_list->p_first)
+    {
+        /* this is an empty list */
+        p_list->p_first =
+        p_list->p_last  = p_new;
+        p_new->p_next   =
+        p_new->p_prev   = NULL;
+    }
+    else
+    {
+        p_old = p_list->p_first;
+        while (1)
+        {
+            if (p_old == NULL)
+            {
+                p_list->p_last->p_next      = p_new;
+                p_new->p_prev               = p_list->p_last;
+                p_new->p_next               = NULL;
+                p_list->p_last              = p_new;
+                break;
+            }
+            else
+            {
+                if (p_new->s_hdl <  p_old->s_hdl)
+                {
+                    /* if not the first in list */
+                    if (p_old->p_prev != NULL)
+                        p_old->p_prev->p_next   = p_new;
+                    else
+                        p_list->p_first = p_new;
+
+                    p_new->p_prev           = p_old->p_prev;
+                    p_new->p_next           = p_old;
+                    p_old->p_prev           = p_new;
+                    break;
+                }
+            }
+            p_old = p_old->p_next;
+        }
+    }
+    p_list->count++;
+
+    gatt_update_last_pri_srv_info(p_list);
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function  gatt_remove_a_srv_from_list
+**
+** Description  Remove a service from the list
+**
+** Returns   BOOLEAN TRUE-if remove is successful
+**
+*******************************************************************************/
+BOOLEAN gatt_remove_a_srv_from_list(tGATT_SRV_LIST_INFO *p_list, tGATT_SRV_LIST_ELEM *p_remove)
+{
+    if (!p_remove || !p_list->p_first)
+    {
+        GATT_TRACE_DEBUG0("p_remove==NULL || p_list->p_first==NULL");
+        return FALSE;
+    }
+
+    if (p_remove->p_prev == NULL)
+    {
+        p_list->p_first             = p_remove->p_next;
+        if (p_remove->p_next)
+            p_remove->p_next->p_prev    = NULL;
+    }
+    else if (p_remove->p_next == NULL)
+    {
+        p_list->p_last              = p_remove->p_prev;
+        p_remove->p_prev->p_next    = NULL;
+    }
+    else
+    {
+        p_remove->p_next->p_prev = p_remove->p_prev;
+        p_remove->p_prev->p_next = p_remove->p_next;
+    }
+    p_list->count--;
+    gatt_update_last_pri_srv_info(p_list);
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function  gatt_add_an_item_to_list
+**
+** Description  add an service handle range to the list in decending
+**              order of the start handle
+**
+** Returns   BOOLEAN TRUE-if add is successful
+**
+*******************************************************************************/
+BOOLEAN gatt_add_an_item_to_list(tGATT_HDL_LIST_INFO *p_list, tGATT_HDL_LIST_ELEM *p_new)
+{
+    tGATT_HDL_LIST_ELEM *p_old;
+    if (!p_new)
+    {
+        GATT_TRACE_DEBUG0("p_new==NULL");
+        return FALSE;
+    }
+
+    if (!p_list->p_first)
+    {
+        /* this is an empty list */
+        p_list->p_first =
+        p_list->p_last  = p_new;
+        p_new->p_next   =
+        p_new->p_prev   = NULL;
+    }
+    else
+    {
+        p_old = p_list->p_first;
+        while (1)
+        {
+            if (p_old == NULL)
+            {
+                p_list->p_last->p_next      = p_new;
+                p_new->p_prev               = p_list->p_last;
+                p_new->p_next               = NULL;
+                p_list->p_last              = p_new;
+
+                break;
+
+            }
+            else
+            {
+                if (p_new->asgn_range.s_handle >  p_old->asgn_range.s_handle)
+                {
+                    if (p_old == p_list->p_first)
+                        p_list->p_first = p_new;
+
+                    p_new->p_prev    = p_old->p_prev;
+                    p_new->p_next    = p_old;
+
+
+                    p_old->p_prev    = p_new;
+                    break;
+                }
+            }
+            p_old = p_old->p_next;
+        }
+    }
+    p_list->count++;
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function  gatt_remove_an_item_from_list
+**
+** Description  Remove an service handle range from the list
+**
+** Returns   BOOLEAN TRUE-if remove is successful
+**
+*******************************************************************************/
+BOOLEAN gatt_remove_an_item_from_list(tGATT_HDL_LIST_INFO *p_list, tGATT_HDL_LIST_ELEM *p_remove)
+{
+    if (!p_remove || !p_list->p_first)
+    {
+        GATT_TRACE_DEBUG0("p_remove==NULL || p_list->p_first==NULL");
+        return FALSE;
+    }
+
+    if (p_remove->p_prev == NULL)
+    {
+        p_list->p_first             = p_remove->p_next;
+        if (p_remove->p_next)
+            p_remove->p_next->p_prev    = NULL;
+    }
+    else if (p_remove->p_next == NULL)
+    {
+        p_list->p_last              = p_remove->p_prev;
+        p_remove->p_prev->p_next    = NULL;
+    }
+    else
+    {
+        p_remove->p_next->p_prev = p_remove->p_prev;
+        p_remove->p_prev->p_next = p_remove->p_next;
+    }
+    p_list->count--;
+    return TRUE;
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_find_the_connected_bda
+**
+** Description      This function find the connected bda
+**
+** Returns           TRUE if found
+**
+*******************************************************************************/
+BOOLEAN gatt_find_the_connected_bda(UINT8 start_idx, BD_ADDR bda, UINT8 *p_found_idx)
+{
+    UINT8 i;
+    BOOLEAN found = FALSE;
+    GATT_TRACE_DEBUG1("gatt_find_the_connected_bda start_idx=%d",start_idx);
+
+    for (i = start_idx ; i < GATT_MAX_PHY_CHANNEL; i ++)
+    {
+        if (gatt_cb.tcb[i].in_use)
+        {
+            memcpy( bda, gatt_cb.tcb[i].peer_bda, BD_ADDR_LEN);
+            *p_found_idx = i;
+            found = TRUE;
+            GATT_TRACE_DEBUG6("gatt_find_the_connected_bda bda :%02x-%02x-%02x-%02x-%02x-%02x",
+                              bda[0],  bda[1], bda[2],  bda[3], bda[4],  bda[5]);
+            break;
+        }
+    }
+    GATT_TRACE_DEBUG2("gatt_find_the_connected_bda found=%d found_idx=%d", found, i);
+    return found;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_is_srv_chg_ind_pending
+**
+** Description      Check whether a service chnaged is in the indication pending queue
+**                  or waiting for an Ack already
+**
+** Returns         BOOLEAN
+**
+*******************************************************************************/
+BOOLEAN gatt_is_srv_chg_ind_pending (tGATT_TCB *p_tcb)
+{
+    tGATT_VALUE *p_buf = (tGATT_VALUE *)GKI_getfirst(&p_tcb->pending_ind_q);
+    BOOLEAN srv_chg_ind_pending = FALSE;
+
+    GATT_TRACE_DEBUG1("gatt_is_srv_chg_ind_pending is_queue_empty=%d", GKI_queue_is_empty(&p_tcb->pending_ind_q) );
+
+    if (p_tcb->indicate_handle == gatt_cb.handle_of_h_r)
+    {
+        srv_chg_ind_pending = TRUE;
+    }
+    else
+    {
+        while (p_buf)
+        {
+            if (p_buf->handle == gatt_cb.handle_of_h_r)
+            {
+                srv_chg_ind_pending = TRUE;
+                break;
+            }
+            p_buf = (tGATT_VALUE *)GKI_getnext(p_buf);
+        }
+    }
+
+    GATT_TRACE_DEBUG1("srv_chg_ind_pending = %d", srv_chg_ind_pending);
+    return srv_chg_ind_pending;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_is_bda_in_the_srv_chg_clt_list
+**
+** Description      This function check the specified bda is in the srv chg clinet list or not
+**
+** Returns         pointer to the found elemenet otherwise NULL
+**
+*******************************************************************************/
+tGATTS_SRV_CHG *gatt_is_bda_in_the_srv_chg_clt_list (BD_ADDR bda)
+{
+    tGATTS_SRV_CHG *p_buf = (tGATTS_SRV_CHG *)GKI_getfirst(&gatt_cb.srv_chg_clt_q);
+
+    GATT_TRACE_DEBUG6("gatt_is_bda_in_the_srv_chg_clt_list :%02x-%02x-%02x-%02x-%02x-%02x",
+                      bda[0],  bda[1], bda[2],  bda[3], bda[4],  bda[5]);
+
+    while (p_buf != NULL)
+    {
+        if (!memcmp( bda, p_buf->bda, BD_ADDR_LEN))
+        {
+            GATT_TRACE_DEBUG0("bda is in the srv chg clt list");
+            break;
+        }
+        p_buf = (tGATTS_SRV_CHG *)GKI_getnext(p_buf);
+    }
+
+    return p_buf;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_is_bda_connected
+**
+** Description
+**
+** Returns           GATT_INDEX_INVALID if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+BOOLEAN gatt_is_bda_connected(BD_ADDR bda)
+{
+    UINT8 i = 0;
+    BOOLEAN connected=FALSE;
+
+    for ( i=0; i < GATT_MAX_PHY_CHANNEL; i ++)
+    {
+        if (gatt_cb.tcb[i].in_use &&
+            !memcmp(gatt_cb.tcb[i].peer_bda, bda, BD_ADDR_LEN))
+        {
+            connected = TRUE;
+            break;
+        }
+    }
+    return connected;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_find_i_tcb_by_addr
+**
+** Description      The function searches for an empty tcb entry, and return the index.
+**
+** Returns           GATT_INDEX_INVALID if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+UINT8 gatt_find_i_tcb_by_addr(BD_ADDR bda)
+{
+    UINT8 i = 0, j = GATT_INDEX_INVALID;
+
+    for ( ; i < GATT_MAX_PHY_CHANNEL; i ++)
+    {
+        if (!memcmp(gatt_cb.tcb[i].peer_bda, bda, BD_ADDR_LEN))
+        {
+            j = i;
+            break;
+        }
+    }
+    return j;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_get_tcb_by_idx
+**
+** Description      The function get TCB using the TCB index
+**
+** Returns           NULL if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+tGATT_TCB * gatt_get_tcb_by_idx(UINT8 tcb_idx)
+{
+    tGATT_TCB   *p_tcb = NULL;
+
+    if ( (tcb_idx < GATT_MAX_PHY_CHANNEL) && gatt_cb.tcb[tcb_idx].in_use)
+        p_tcb = &gatt_cb.tcb[tcb_idx];
+
+    return p_tcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_find_tcb_by_addr
+**
+** Description      The function searches for an empty tcb entry, and return pointer.
+**
+** Returns           NULL if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+tGATT_TCB * gatt_find_tcb_by_addr(BD_ADDR bda)
+{
+    tGATT_TCB   *p_tcb = NULL;
+    UINT8 i = 0;
+
+    if ((i = gatt_find_i_tcb_by_addr(bda)) != GATT_INDEX_INVALID)
+        p_tcb = &gatt_cb.tcb[i];
+
+    return p_tcb;
+}
+/*******************************************************************************
+**
+** Function         gatt_find_i_tcb_free
+**
+** Description      The function searches for an empty tcb entry, and return the index.
+**
+** Returns           GATT_INDEX_INVALID if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+UINT8 gatt_find_i_tcb_free(void)
+{
+    UINT8 i = 0, j = GATT_INDEX_INVALID;
+
+    for (i = 0; i < GATT_MAX_PHY_CHANNEL; i ++)
+    {
+        if (!gatt_cb.tcb[i].in_use)
+        {
+            j = i;
+            break;
+        }
+    }
+    return j;
+}
+/*******************************************************************************
+**
+** Function         gatt_allocate_tcb_by_bdaddr
+**
+** Description      The function locate or allocate new tcb entry for matching bda.
+**
+** Returns           GATT_INDEX_INVALID if not found. Otherwise index to the tcb.
+**
+*******************************************************************************/
+tGATT_TCB * gatt_allocate_tcb_by_bdaddr(BD_ADDR bda)
+{
+    UINT8 i = 0;
+    BOOLEAN allocated = FALSE;
+    tGATT_TCB    *p_tcb = NULL;
+
+    /* search for existing tcb with matching bda    */
+    i = gatt_find_i_tcb_by_addr(bda);
+    /* find free tcb */
+    if (i == GATT_INDEX_INVALID)
+    {
+        i = gatt_find_i_tcb_free();
+        allocated = TRUE;
+    }
+    if (i != GATT_INDEX_INVALID)
+    {
+        p_tcb = &gatt_cb.tcb[i];
+
+        if (allocated)
+        {
+            memset(p_tcb, 0, sizeof(tGATT_TCB));
+            p_tcb->in_use = TRUE;
+            p_tcb->tcb_idx = i;
+        }
+        memcpy(p_tcb->peer_bda, bda, BD_ADDR_LEN);
+    }
+    return p_tcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_convert_uuid16_to_uuid128
+**
+** Description      Convert a 16 bits UUID to be an standard 128 bits one.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+void gatt_convert_uuid16_to_uuid128(UINT8 uuid_128[LEN_UUID_128], UINT16 uuid_16)
+{
+    UINT8   *p = &uuid_128[LEN_UUID_128 - 4];
+
+    memcpy (uuid_128, base_uuid, LEN_UUID_128);
+
+    UINT16_TO_STREAM(p, uuid_16);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_uuid_compare
+**
+** Description      Compare two UUID to see if they are the same.
+**
+** Returns          TRUE if two uuid match; FALSE otherwise.
+**
+*******************************************************************************/
+BOOLEAN gatt_uuid_compare (tBT_UUID src, tBT_UUID tar)
+{
+    UINT8  su[LEN_UUID_128], tu[LEN_UUID_128];
+    UINT8  *ps, *pt;
+
+    /* any of the UUID is unspecified */
+    if (src.len == 0 || tar.len == 0)
+    {
+        return TRUE;
+    }
+
+    /* If both are 16-bit, we can do a simple compare */
+    if (src.len == 2 && tar.len == 2)
+    {
+        return src.uu.uuid16 == tar.uu.uuid16;
+    }
+
+    /* One or both of the UUIDs is 128-bit */
+    if (src.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        gatt_convert_uuid16_to_uuid128(su, src.uu.uuid16);
+        ps = su;
+    }
+    else
+        ps = src.uu.uuid128;
+
+    if (tar.len == LEN_UUID_16)
+    {
+        /* convert a 16 bits UUID to 128 bits value */
+        gatt_convert_uuid16_to_uuid128(tu, tar.uu.uuid16);
+        pt = tu;
+    }
+    else
+        pt = tar.uu.uuid128;
+
+    return(memcmp(ps, pt, LEN_UUID_128) == 0);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_build_uuid_to_stream
+**
+** Description      Add UUID into stream.
+**
+** Returns          UUID length.
+**
+*******************************************************************************/
+UINT8 gatt_build_uuid_to_stream(UINT8 **p_dst, tBT_UUID uuid)
+{
+    UINT8   *p = *p_dst;
+    UINT8   len = 0;
+
+    if (uuid.len == LEN_UUID_16)
+    {
+        UINT16_TO_STREAM (p, uuid.uu.uuid16);
+        len = LEN_UUID_16;
+    }
+    else if (uuid.len == LEN_UUID_128)
+    {
+        ARRAY_TO_STREAM (p, uuid.uu.uuid128, LEN_UUID_128);
+        len = LEN_UUID_128;
+    }
+
+    *p_dst = p;
+    return len;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_parse_uuid_from_cmd
+**
+** Description      Convert a 128 bits UUID into a 16 bits UUID.
+**
+** Returns          TRUE if command sent, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN gatt_parse_uuid_from_cmd(tBT_UUID *p_uuid_rec, UINT16 uuid_size, UINT8 **p_data)
+{
+    BOOLEAN is_base_uuid, ret = TRUE;
+    UINT8  xx;
+    UINT8 *p_uuid = *p_data;
+
+    memset(p_uuid_rec, 0, sizeof(tBT_UUID));
+
+    switch (uuid_size)
+    {
+        case LEN_UUID_16:
+            p_uuid_rec->len = uuid_size;
+            STREAM_TO_UINT16 (p_uuid_rec->uu.uuid16, p_uuid);
+            *p_data += LEN_UUID_16;
+            break;
+
+        case LEN_UUID_128:
+            /* See if we can compress his UUID down to 16 or 32bit UUIDs */
+            is_base_uuid = TRUE;
+            for (xx = 0; xx < LEN_UUID_128 - 4; xx++)
+            {
+                if (p_uuid[xx] != base_uuid[xx])
+                {
+                    is_base_uuid = FALSE;
+                    break;
+                }
+            }
+            if (is_base_uuid)
+            {
+                if ((p_uuid[LEN_UUID_128 - 1] == 0) && (p_uuid[LEN_UUID_128 - 2] == 0))
+                {
+                    p_uuid += (LEN_UUID_128 - 4);
+                    p_uuid_rec->len = LEN_UUID_16;
+                    STREAM_TO_UINT16(p_uuid_rec->uu.uuid16, p_uuid);
+                }
+                else
+                    is_base_uuid = FALSE;
+            }
+            if (!is_base_uuid)
+            {
+                p_uuid_rec->len = LEN_UUID_128;
+                memcpy(p_uuid_rec->uu.uuid128, p_uuid, LEN_UUID_128);
+            }
+            *p_data += LEN_UUID_128;
+            break;
+
+        case 0:
+        default:
+            if (uuid_size != 0) ret = FALSE;
+            GATT_TRACE_WARNING0("gatt_parse_uuid_from_cmd invalid uuid size");
+            break;
+    }
+
+    return( ret);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_start_rsp_timer
+**
+** Description      Start a wait_for_response timer.
+**
+** Returns          TRUE if command sent, otherwise FALSE.
+**
+*******************************************************************************/
+void gatt_start_rsp_timer(tGATT_TCB    *p_tcb)
+{
+    p_tcb->rsp_timer_ent.param  = (TIMER_PARAM_TYPE)p_tcb;
+    btu_start_timer (&p_tcb->rsp_timer_ent, BTU_TTYPE_ATT_WAIT_FOR_RSP,
+                     GATT_WAIT_FOR_RSP_TOUT);
+}
+/*******************************************************************************
+**
+** Function         gatt_start_conf_timer
+**
+** Description      Start a wait_for_confirmation timer.
+**
+** Returns          TRUE if command sent, otherwise FALSE.
+**
+*******************************************************************************/
+void gatt_start_conf_timer(tGATT_TCB    *p_tcb)
+{
+    p_tcb->conf_timer_ent.param  = (TIMER_PARAM_TYPE)p_tcb;
+    btu_start_timer (&p_tcb->conf_timer_ent, BTU_TTYPE_ATT_WAIT_FOR_RSP,
+                     GATT_WAIT_FOR_RSP_TOUT);
+}
+/*******************************************************************************
+**
+** Function         gatt_start_ind_ack_timer
+**
+** Description      start the application ack timer
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_start_ind_ack_timer(tGATT_TCB *p_tcb)
+{
+    p_tcb->ind_ack_timer_ent.param  = (TIMER_PARAM_TYPE)p_tcb;
+    /* start notification cache timer */
+    btu_start_timer (&p_tcb->ind_ack_timer_ent, BTU_TTYPE_ATT_WAIT_FOR_IND_ACK,
+                     GATT_WAIT_FOR_RSP_TOUT);
+
+}
+/*******************************************************************************
+**
+** Function         gatt_rsp_timeout
+**
+** Description      Called when GATT wait for ATT command response timer expires
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_rsp_timeout(TIMER_LIST_ENT *p_tle)
+{
+    GATT_TRACE_WARNING0("gatt_rsp_timeout disconnecting...");
+    gatt_disconnect (((tGATT_TCB *)p_tle->param)->peer_bda);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_ind_ack_timeout
+**
+** Description      Called when GATT wait for ATT handle confirmation timeout
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_ind_ack_timeout(TIMER_LIST_ENT *p_tle)
+{
+    tGATT_TCB * p_tcb = (tGATT_TCB *)p_tle->param;
+
+    GATT_TRACE_WARNING0("gatt_ind_ack_timeout send ack now");
+
+    if (p_tcb != NULL)
+        p_tcb->ind_count = 0;
+
+    attp_send_cl_msg(((tGATT_TCB *)p_tle->param), 0, GATT_HANDLE_VALUE_CONF, NULL);
+}
+/*******************************************************************************
+**
+** Function         gatt_sr_find_i_rcb_by_handle
+**
+** Description      The function searches for a service that owns a specific handle.
+**
+** Returns          GATT_MAX_SR_PROFILES if not found. Otherwise index of th eservice.
+**
+*******************************************************************************/
+UINT8 gatt_sr_find_i_rcb_by_handle(UINT16 handle)
+{
+    UINT8  i_rcb = 0;
+
+    for ( ; i_rcb < GATT_MAX_SR_PROFILES; i_rcb++)
+    {
+        if (gatt_cb.sr_reg[i_rcb].in_use &&
+            gatt_cb.sr_reg[i_rcb].s_hdl <= handle &&
+            gatt_cb.sr_reg[i_rcb].e_hdl >= handle )
+        {
+            break;
+        }
+    }
+    return i_rcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_find_i_rcb_by_handle
+**
+** Description      The function searches for a service that owns a specific handle.
+**
+** Returns          0 if not found. Otherwise index of th eservice.
+**
+*******************************************************************************/
+UINT8 gatt_sr_find_i_rcb_by_app_id(tBT_UUID *p_app_uuid128, tBT_UUID *p_svc_uuid, UINT16 svc_inst)
+{
+    UINT8           i_rcb = 0;
+    tGATT_SR_REG    *p_sreg;
+    tBT_UUID        *p_this_uuid;
+
+    for (i_rcb = 0, p_sreg = gatt_cb.sr_reg; i_rcb < GATT_MAX_SR_PROFILES; i_rcb++, p_sreg++)
+    {
+        if ( p_sreg->in_use )
+        {
+            p_this_uuid = gatts_get_service_uuid (p_sreg->p_db);
+
+            if (p_this_uuid &&
+                gatt_uuid_compare (*p_app_uuid128, p_sreg->app_uuid ) &&
+                gatt_uuid_compare (*p_svc_uuid, *p_this_uuid) &&
+                (svc_inst == p_sreg->service_instance))
+            {
+                GATT_TRACE_ERROR0 ("Active Service Found ");
+                gatt_dbg_display_uuid(*p_svc_uuid);
+
+                break;
+            }
+        }
+    }
+    return i_rcb;
+}
+/*******************************************************************************
+**
+** Function         gatt_sr_find_i_rcb_by_handle
+**
+** Description      The function searches for a service that owns a specific handle.
+**
+** Returns          0 if not found. Otherwise index of th eservice.
+**
+*******************************************************************************/
+UINT8 gatt_sr_alloc_rcb(tGATT_HDL_LIST_ELEM *p_list )
+{
+    UINT8   ii = 0;
+    tGATT_SR_REG    *p_sreg = NULL;
+
+    /*this is a new application servoce start */
+    for (ii = 0, p_sreg = gatt_cb.sr_reg; ii < GATT_MAX_SR_PROFILES; ii++, p_sreg++)
+    {
+        if (!p_sreg->in_use)
+        {
+            memset (p_sreg, 0, sizeof(tGATT_SR_REG));
+
+            p_sreg->in_use = TRUE;
+            memcpy (&p_sreg->app_uuid, &p_list->asgn_range.app_uuid128, sizeof(tBT_UUID));
+
+            p_sreg->service_instance    = p_list->asgn_range.svc_inst;
+            p_sreg->type                = p_list->asgn_range.is_primary ? GATT_UUID_PRI_SERVICE: GATT_UUID_SEC_SERVICE;
+            p_sreg->s_hdl               = p_list->asgn_range.s_handle;
+            p_sreg->e_hdl               = p_list->asgn_range.e_handle;
+            //p_sreg->sr_cb               = *p_cback;
+            p_sreg->p_db                = &p_list->svc_db;
+
+            GATT_TRACE_DEBUG1 ("total GKI buffer in db [%d]",p_sreg->p_db->svc_buffer.count);
+            break;
+        }
+    }
+
+    return ii;
+}
+/*******************************************************************************
+**
+** Function         gatt_sr_get_sec_info
+**
+** Description      Get the security flag and key size information for the peer
+**                  device.
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_sr_get_sec_info(BD_ADDR rem_bda, BOOLEAN le_conn, UINT8 *p_sec_flag, UINT8 *p_key_size)
+{
+    UINT8           sec_flag = 0;
+
+    BTM_GetSecurityFlags(rem_bda, &sec_flag);
+
+    sec_flag &= (GATT_SEC_FLAG_LKEY_UNAUTHED | GATT_SEC_FLAG_LKEY_AUTHED | GATT_SEC_FLAG_ENCRYPTED);
+
+    *p_key_size = btm_ble_read_sec_key_size(rem_bda);
+    *p_sec_flag = sec_flag;
+}
+/*******************************************************************************
+**
+** Function         gatt_sr_send_req_callback
+**
+** Description
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_sr_send_req_callback(UINT16 conn_id,
+                               UINT32 trans_id,
+                               tGATTS_REQ_TYPE type, tGATTS_DATA *p_data)
+{
+    tGATT_IF        gatt_if = GATT_GET_GATT_IF(conn_id);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+    if (!p_reg )
+    {
+        GATT_TRACE_ERROR0 ("p_reg not found discard request");
+        return;
+    }
+
+    if ( p_reg->in_use &&
+         p_reg->app_cb.p_req_cb)
+    {
+        (*p_reg->app_cb.p_req_cb)(conn_id, trans_id, type, p_data);
+    }
+    else
+    {
+        GATT_TRACE_WARNING1("Call back not found for application conn_id=%d", conn_id);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_send_error_rsp
+**
+** Description      This function sends an error response.
+**
+** Returns          void
+**
+*******************************************************************************/
+tGATT_STATUS gatt_send_error_rsp (tGATT_TCB *p_tcb, UINT8 err_code, UINT8 op_code,
+                                  UINT16 handle, BOOLEAN deq)
+{
+    tGATT_ERROR      error;
+    tGATT_STATUS     status;
+    BT_HDR           *p_buf;
+
+    error.cmd_code = op_code;
+    error.reason = err_code;
+    error.handle =handle;
+
+    if ((p_buf = attp_build_sr_msg(p_tcb, GATT_RSP_ERROR, (tGATT_SR_MSG *)&error)) != NULL)
+    {
+        status = attp_send_sr_msg (p_tcb, p_buf);
+    }
+    else
+        status = GATT_INSUF_RESOURCE;
+
+    if (deq)
+        gatt_dequeue_sr_cmd(p_tcb);
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_add_sdp_record
+**
+** Description      This function add a SDP record for a GATT primary service
+**
+** Returns          0 if error else sdp handle for the record.
+**
+*******************************************************************************/
+UINT32 gatt_add_sdp_record (tBT_UUID *p_uuid, UINT16 start_hdl, UINT16 end_hdl)
+{
+    tSDP_PROTOCOL_ELEM  proto_elem_list[2];
+    UINT32              sdp_handle;
+    UINT16              list = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    UINT8               buff[60];
+    UINT8               *p = buff;
+
+    GATT_TRACE_DEBUG2("gatt_add_sdp_record s_hdl=0x%x  s_hdl=0x%x",start_hdl, end_hdl);
+
+    if ((sdp_handle = SDP_CreateRecord()) == 0)
+        return 0;
+
+    switch (p_uuid->len)
+    {
+        case LEN_UUID_16:
+            SDP_AddServiceClassIdList(sdp_handle, 1, &p_uuid->uu.uuid16);
+            break;
+        case LEN_UUID_128:
+            UINT8_TO_BE_STREAM (p, (UUID_DESC_TYPE << 3) | SIZE_SIXTEEN_BYTES);
+            ARRAY_TO_BE_STREAM (p, p_uuid->uu.uuid128, LEN_UUID_128);
+            SDP_AddAttribute (sdp_handle, ATTR_ID_SERVICE_CLASS_ID_LIST, DATA_ELE_SEQ_DESC_TYPE,
+                              (UINT32) (p - buff), buff);
+            break;
+
+        default:
+            GATT_TRACE_ERROR1("inavlid UUID len=%d", p_uuid->len);
+            SDP_DeleteRecord(sdp_handle);
+            return 0;
+            break;
+    }
+
+    /*** Fill out the protocol element sequence for SDP ***/
+    proto_elem_list[0].protocol_uuid = UUID_PROTOCOL_L2CAP;
+    proto_elem_list[0].num_params    = 1;
+    proto_elem_list[0].params[0]     = BT_PSM_ATT;
+    proto_elem_list[1].protocol_uuid = UUID_PROTOCOL_ATT;
+    proto_elem_list[1].num_params    = 2;
+    proto_elem_list[1].params[0]     = start_hdl;
+    proto_elem_list[1].params[1]     = end_hdl;
+
+    SDP_AddProtocolList(sdp_handle, 2, proto_elem_list);
+
+    /* Make the service browseable */
+    SDP_AddUuidSequence (sdp_handle, ATTR_ID_BROWSE_GROUP_LIST, 1, &list);
+
+    return(sdp_handle);
+}
+
+
+    #if GATT_CONFORMANCE_TESTING == TRUE
+/*******************************************************************************
+**
+** Function         gatt_set_err_rsp
+**
+** Description      This function is called to set the test confirm value
+**
+** Returns          void
+**
+*******************************************************************************/
+void gatt_set_err_rsp(BOOLEAN enable, UINT8 req_op_code, UINT8 err_status)
+{
+    GATT_TRACE_DEBUG3("gatt_set_err_rsp enable=%d op_code=%d, err_status=%d", enable, req_op_code, err_status);
+    gatt_cb.enable_err_rsp  = enable;
+    gatt_cb.req_op_code     = req_op_code;
+    gatt_cb.err_status      = err_status;
+}
+    #endif
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_get_regcb
+**
+** Description      The function returns the registration control block.
+**
+** Returns          pointer to the registration control block or NULL
+**
+*******************************************************************************/
+tGATT_REG *gatt_get_regcb (tGATT_IF gatt_if)
+{
+    UINT8           ii = (UINT8)gatt_if;
+    tGATT_REG       *p_reg = NULL;
+
+    if (ii)
+    {
+        ii--; /* convert from one based to zero based */
+        p_reg = &gatt_cb.cl_rcb[ii];
+        if ( (ii < GATT_MAX_APPS)  && (p_reg->in_use) )
+            return(p_reg);
+    }
+
+    return NULL;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_is_clcb_allocated
+**
+** Description      The function check clcb for conn_id is allocated or not
+**
+** Returns           True already allocated
+**
+*******************************************************************************/
+
+BOOLEAN gatt_is_clcb_allocated (UINT16 conn_id)
+{
+    UINT8         i = 0;
+    BOOLEAN       is_allocated= FALSE;
+
+    for (i = 0; i < GATT_CL_MAX_LCB; i++)
+    {
+        if (gatt_cb.clcb[i].in_use && (gatt_cb.clcb[i].conn_id == conn_id))
+        {
+            is_allocated = TRUE;
+            break;
+        }
+    }
+
+    return is_allocated;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_clcb_alloc
+**
+** Description      The function allocates a GATT  connection link control block
+**
+** Returns           NULL if not found. Otherwise pointer to the connection link block.
+**
+*******************************************************************************/
+tGATT_CLCB *gatt_clcb_alloc (UINT16 conn_id)
+{
+    UINT8           i = 0;
+    tGATT_CLCB      *p_clcb = NULL;
+    tGATT_IF        gatt_if=GATT_GET_GATT_IF(conn_id);
+    UINT8           tcb_idx = GATT_GET_TCB_IDX(conn_id);
+    tGATT_TCB       *p_tcb = gatt_get_tcb_by_idx(tcb_idx);
+    tGATT_REG       *p_reg = gatt_get_regcb(gatt_if);
+
+    for (i = 0; i < GATT_CL_MAX_LCB; i++)
+    {
+        if (!gatt_cb.clcb[i].in_use)
+        {
+            p_clcb = &gatt_cb.clcb[i];
+
+            p_clcb->in_use      = TRUE;
+            p_clcb->conn_id     = conn_id;
+            p_clcb->clcb_idx    = i;
+            p_clcb->p_reg       = p_reg;
+            p_clcb->p_tcb       = p_tcb;
+            break;
+        }
+    }
+    return p_clcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_clcb_dealloc
+**
+** Description      The function de allocates a GATT  connection link control block
+**
+** Returns         None
+**
+*******************************************************************************/
+void gatt_clcb_dealloc (tGATT_CLCB *p_clcb)
+{
+    if (p_clcb && p_clcb->in_use)
+    {
+        memset(p_clcb, 0, sizeof(tGATT_CLCB));
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_find_tcb_by_cid
+**
+** Description      The function searches for an empty entry
+**                   in registration info table for GATT client
+**
+** Returns           NULL if not found. Otherwise pointer to the rcb.
+**
+*******************************************************************************/
+tGATT_TCB * gatt_find_tcb_by_cid (UINT16 lcid)
+{
+    UINT16       xx = 0;
+    tGATT_TCB    *p_tcb = NULL;
+
+    for (xx = 0; xx < GATT_MAX_PHY_CHANNEL; xx++)
+    {
+        if (gatt_cb.tcb[xx].in_use && gatt_cb.tcb[xx].att_lcid == lcid)
+        {
+            p_tcb = &gatt_cb.tcb[xx];
+            break;
+        }
+    }
+    return p_tcb;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_num_apps_hold_link
+**
+** Description      The function find the number of applcaitions is holding the link
+**
+** Returns          total number of applications holding this acl link.
+**
+*******************************************************************************/
+UINT8 gatt_num_apps_hold_link(tGATT_TCB *p_tcb)
+{
+    UINT8 i, num = 0;
+
+    for (i = 0; i < GATT_MAX_APPS; i ++)
+    {
+        if (p_tcb->app_hold_link[i])
+            num ++;
+    }
+
+    GATT_TRACE_DEBUG1("gatt_num_apps_hold_link   num=%d",  num);
+    return num;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_num_clcb_by_bd_addr
+**
+** Description      The function searches all LCB with macthing bd address
+**
+** Returns          total number of clcb found.
+**
+*******************************************************************************/
+UINT8 gatt_num_clcb_by_bd_addr(BD_ADDR bda)
+{
+    UINT8 i, num = 0;
+
+    for (i = 0; i < GATT_CL_MAX_LCB; i ++)
+    {
+        if (gatt_cb.clcb[i].in_use && memcmp(gatt_cb.clcb[i].p_tcb->peer_bda, bda, BD_ADDR_LEN) == 0)
+            num ++;
+    }
+    return num;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_update_cback_cnt
+**
+** Description      The function searches all LCB with macthing bd address
+**
+** Returns          total number of clcb found.
+**
+*******************************************************************************/
+void gatt_sr_copy_prep_cnt_to_cback_cnt(tGATT_TCB *p_tcb )
+{
+    UINT8 i;
+
+    if (p_tcb)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            if (p_tcb->prep_cnt[i])
+            {
+                p_tcb->sr_cmd.cback_cnt[i]=1;
+            }
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_is_cback_cnt_zero
+**
+** Description      The function searches all LCB with macthing bd address
+**
+** Returns          True if thetotal application callback count is zero
+**
+*******************************************************************************/
+BOOLEAN gatt_sr_is_cback_cnt_zero(tGATT_TCB *p_tcb )
+{
+    BOOLEAN status = TRUE;
+    UINT8   i;
+
+    if (p_tcb)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            if (p_tcb->sr_cmd.cback_cnt[i])
+            {
+                status = FALSE;
+                break;
+            }
+        }
+    }
+    else
+    {
+        status = FALSE;
+    }
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_is_prep_cnt_zero
+**
+** Description      Check the prepare write request count is zero or not
+**
+** Returns          True no prepare write request
+**
+*******************************************************************************/
+BOOLEAN gatt_sr_is_prep_cnt_zero(tGATT_TCB *p_tcb)
+{
+    BOOLEAN status = TRUE;
+    UINT8   i;
+
+    if (p_tcb)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            if (p_tcb->prep_cnt[i])
+            {
+                status = FALSE;
+                break;
+            }
+        }
+    }
+    else
+    {
+        status = FALSE;
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_sr_reset_cback_cnt
+**
+** Description      Reset the application callback count to zero
+**
+** Returns         None
+**
+*******************************************************************************/
+void gatt_sr_reset_cback_cnt(tGATT_TCB *p_tcb )
+{
+    UINT8 i;
+
+    if (p_tcb)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            p_tcb->sr_cmd.cback_cnt[i]=0;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         gatt_sr_reset_prep_cnt
+**
+** Description     Reset the prep write count to zero
+**
+** Returns        None
+**
+*******************************************************************************/
+void gatt_sr_reset_prep_cnt(tGATT_TCB *p_tcb )
+{
+    UINT8 i;
+    if (p_tcb)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            p_tcb->prep_cnt[i]=0;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_sr_update_cback_cnt
+**
+** Description    Update the teh applicaiton callback count
+**
+** Returns           None
+**
+*******************************************************************************/
+void gatt_sr_update_cback_cnt(tGATT_TCB *p_tcb, tGATT_IF gatt_if, BOOLEAN is_inc, BOOLEAN is_reset_first)
+{
+
+    UINT8 idx = ((UINT8) gatt_if) - 1 ;
+
+    if (p_tcb)
+    {
+        if (is_reset_first)
+        {
+            gatt_sr_reset_cback_cnt(p_tcb);
+        }
+        if (is_inc)
+        {
+            p_tcb->sr_cmd.cback_cnt[idx]++;
+        }
+        else
+        {
+            if ( p_tcb->sr_cmd.cback_cnt[idx])
+            {
+                p_tcb->sr_cmd.cback_cnt[idx]--;
+            }
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_sr_update_prep_cnt
+**
+** Description    Update the teh prepare write request count
+**
+** Returns           None
+**
+*******************************************************************************/
+void gatt_sr_update_prep_cnt(tGATT_TCB *p_tcb, tGATT_IF gatt_if, BOOLEAN is_inc, BOOLEAN is_reset_first)
+{
+    UINT8 idx = ((UINT8) gatt_if) - 1 ;
+
+    GATT_TRACE_DEBUG4("gatt_sr_update_prep_cnt tcb idx=%d gatt_if=%d is_inc=%d is_reset_first=%d",
+                      p_tcb->tcb_idx, gatt_if, is_inc, is_reset_first);
+
+    if (p_tcb)
+    {
+        if (is_reset_first)
+        {
+            gatt_sr_reset_prep_cnt(p_tcb);
+        }
+        if (is_inc)
+        {
+            p_tcb->prep_cnt[idx]++;
+        }
+        else
+        {
+            if (p_tcb->prep_cnt[idx])
+            {
+                p_tcb->prep_cnt[idx]--;
+            }
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         gatt_cancel_open
+**
+** Description      Cancel open request
+**
+** Returns         Boolean
+**
+*******************************************************************************/
+BOOLEAN gatt_cancel_open(tGATT_IF gatt_if, BD_ADDR bda)
+{
+    tGATT_TCB *p_tcb=NULL;
+    BOOLEAN status= TRUE;
+
+    p_tcb = gatt_find_tcb_by_addr(bda);
+    if (p_tcb)
+    {
+        if (gatt_get_ch_state(p_tcb) == GATT_CH_OPEN)
+        {
+            GATT_TRACE_ERROR0("GATT_CancelConnect - link connected Too late to cancel");
+            status = FALSE;
+        }
+        else
+        {
+            gatt_update_app_use_link_flag(gatt_if, p_tcb, FALSE, FALSE);
+            if (!gatt_num_apps_hold_link(p_tcb))
+            {
+                gatt_disconnect(p_tcb->peer_bda);
+            }
+        }
+    }
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_find_app_hold_link
+**
+** Description      find the applicaiton that is holding the specified link
+**
+** Returns         Boolean
+**
+*******************************************************************************/
+BOOLEAN gatt_find_app_hold_link(tGATT_TCB *p_tcb, UINT8 start_idx, UINT8 *p_found_idx, tGATT_IF *p_gatt_if)
+{
+    UINT8 i;
+    BOOLEAN found= FALSE;
+
+    for (i = start_idx; i < GATT_MAX_APPS; i ++)
+    {
+        if (p_tcb->app_hold_link[i])
+        {
+            *p_gatt_if = gatt_cb.clcb[i].p_reg->gatt_if;
+            *p_found_idx = i;
+            found = TRUE;
+            break;
+        }
+    }
+    return found;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_cmd_enq
+**
+** Description      Enqueue this command.
+**
+** Returns          None.
+**
+*******************************************************************************/
+BOOLEAN gatt_cmd_enq(tGATT_TCB *p_tcb, UINT16 clcb_idx, BOOLEAN to_send, UINT8 op_code, BT_HDR *p_buf)
+{
+    tGATT_CMD_Q  *p_cmd = &p_tcb->cl_cmd_q[p_tcb->next_slot_inq];
+
+    p_cmd->to_send = to_send; /* waiting to be sent */
+    p_cmd->op_code  = op_code;
+    p_cmd->p_cmd    = p_buf;
+    p_cmd->clcb_idx = clcb_idx;
+
+    if (!to_send)
+    {
+        p_tcb->pending_cl_req = p_tcb->next_slot_inq;
+    }
+
+    p_tcb->next_slot_inq ++;
+    p_tcb->next_slot_inq %= GATT_CL_MAX_LCB;
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_cmd_dequeue
+**
+** Description      dequeue the command in the client CCB command queue.
+**
+** Returns          total number of clcb found.
+**
+*******************************************************************************/
+tGATT_CLCB * gatt_cmd_dequeue(tGATT_TCB *p_tcb, UINT8 *p_op_code)
+{
+    tGATT_CMD_Q  *p_cmd = &p_tcb->cl_cmd_q[p_tcb->pending_cl_req];
+    tGATT_CLCB *p_clcb = NULL;
+
+    if (p_tcb->pending_cl_req != p_tcb->next_slot_inq)
+    {
+        p_clcb = &gatt_cb.clcb[p_cmd->clcb_idx];
+
+        *p_op_code = p_cmd->op_code;
+
+        p_tcb->pending_cl_req ++;
+        p_tcb->pending_cl_req %= GATT_CL_MAX_LCB;
+    }
+
+    return p_clcb;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_send_write_msg
+**
+** Description      This real function send out the ATT message for write.
+**
+** Returns          status code
+**
+*******************************************************************************/
+UINT8 gatt_send_write_msg (tGATT_TCB *p_tcb, UINT16 clcb_idx, UINT8 op_code,
+                           UINT16 handle, UINT16 len,
+                           UINT16 offset, UINT8 *p_data)
+{
+    tGATT_CL_MSG     msg;
+
+    msg.attr_value.handle = handle;
+    msg.attr_value.len = len;
+    msg.attr_value.offset = offset;
+
+    memcpy (msg.attr_value.value, p_data, len);
+
+    /* write by handle */
+    return attp_send_cl_msg(p_tcb, clcb_idx, op_code, &msg);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_act_send_browse
+**
+** Description      This function ends a browse command request, including read
+**                  information request and read by type request.
+**
+** Returns          status code
+**
+*******************************************************************************/
+UINT8 gatt_act_send_browse(tGATT_TCB *p_tcb, UINT16 index, UINT8 op, UINT16 s_handle,
+                           UINT16 e_handle, tBT_UUID uuid)
+{
+    tGATT_CL_MSG     msg;
+
+    msg.browse.s_handle = s_handle;
+    msg.browse.e_handle   = e_handle;
+    memcpy(&msg.browse.uuid, &uuid, sizeof(tBT_UUID));
+
+    /* write by handle */
+    return attp_send_cl_msg(p_tcb, index, op, &msg);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_end_operation
+**
+** Description      This function ends a discovery, send callback and finalize
+**                  some control value.
+**
+** Returns          16 bits uuid.
+**
+*******************************************************************************/
+void gatt_end_operation(tGATT_CLCB *p_clcb, tGATT_STATUS status, void *p_data)
+{
+    tGATT_CL_COMPLETE   cb_data;
+    tGATT_CMPL_CBACK    *p_cmpl_cb = (p_clcb->p_reg) ? p_clcb->p_reg->app_cb.p_cmpl_cb : NULL;
+    UINT8               op = p_clcb->operation, disc_type=GATT_DISC_MAX;
+    tGATT_DISC_CMPL_CB  *p_disc_cmpl_cb = (p_clcb->p_reg) ? p_clcb->p_reg->app_cb.p_disc_cmpl_cb : NULL;
+    UINT16              conn_id;
+    UINT8               operation;
+
+    GATT_TRACE_DEBUG3 ("gatt_end_operation status=%d op=%d subtype=%d",
+                       status, p_clcb->operation, p_clcb->op_subtype);
+
+    if (p_cmpl_cb != NULL && p_clcb->operation != 0)
+    {
+        if (p_clcb->operation == GATTC_OPTYPE_READ)
+        {
+            memset(&cb_data.att_value, 0, sizeof(tGATT_VALUE));
+            cb_data.att_value.handle   = p_clcb->s_handle;
+            cb_data.att_value.len      = p_clcb->counter;
+            if (p_data)
+                memcpy (cb_data.att_value.value, p_data, cb_data.att_value.len);
+        }
+
+        if (p_clcb->operation == GATTC_OPTYPE_WRITE)
+        {
+            memset(&cb_data.att_value, 0, sizeof(tGATT_VALUE));
+            cb_data.handle           =
+            cb_data.att_value.handle = p_clcb->s_handle;
+            if (p_clcb->op_subtype == GATT_WRITE_PREPARE)
+            {
+                if (p_data)
+                {
+                    cb_data.att_value = *((tGATT_VALUE *) p_data);
+                }
+                else
+                {
+                    GATT_TRACE_DEBUG0("Rcv Prepare write rsp but no data");
+                }
+            }
+        }
+
+        if (p_clcb->operation == GATTC_OPTYPE_CONFIG)
+            cb_data.mtu = p_clcb->p_tcb->payload_size;
+
+        if (p_clcb->operation == GATTC_OPTYPE_DISCOVERY)
+        {
+            disc_type = p_clcb->op_subtype;
+        }
+    }
+
+    if (p_clcb->p_attr_buf)
+    {
+        GKI_freebuf(p_clcb->p_attr_buf);
+    }
+
+    operation =  p_clcb->operation;
+    conn_id = p_clcb->conn_id;
+
+    gatt_clcb_dealloc(p_clcb);
+
+    if (p_disc_cmpl_cb && (op == GATTC_OPTYPE_DISCOVERY))
+        (*p_disc_cmpl_cb)(conn_id, disc_type, status);
+    else if (p_cmpl_cb && op)
+        (*p_cmpl_cb)(conn_id, op, status, &cb_data);
+    else
+        GATT_TRACE_WARNING3 ("gatt_end_operation not sent out op=%d p_disc_cmpl_cb:%p p_cmpl_cb:%p",
+                             operation, p_disc_cmpl_cb, p_cmpl_cb);
+}
+
+/*******************************************************************************
+**
+** Function         gatt_cleanup_upon_disc
+**
+** Description      This function cleans up the control blocks when L2CAP channel
+**                  disconnect.
+**
+** Returns          16 bits uuid.
+**
+*******************************************************************************/
+void gatt_cleanup_upon_disc(BD_ADDR bda, UINT16 reason)
+{
+    tGATT_TCB       *p_tcb = NULL;
+    tGATT_CLCB      *p_clcb;
+    UINT8           i;
+    UINT16          conn_id;
+    tGATT_REG        *p_reg=NULL;
+
+
+    GATT_TRACE_DEBUG0 ("gatt_cleanup_upon_disc ");
+
+    if ((p_tcb = gatt_find_tcb_by_addr(bda)) != NULL)
+    {
+        GATT_TRACE_DEBUG0 ("found p_tcb ");
+        for (i = 0; i < GATT_CL_MAX_LCB; i ++)
+        {
+            p_clcb = &gatt_cb.clcb[i];
+            if (p_clcb->in_use && p_clcb->p_tcb == p_tcb)
+            {
+                GATT_TRACE_DEBUG2 ("found p_clcb conn_id=%d clcb_idx=%d", p_clcb->conn_id, p_clcb->clcb_idx);
+                if (p_clcb->operation != GATTC_OPTYPE_NONE)
+                    gatt_end_operation(p_clcb, GATT_ERROR, NULL);
+
+                gatt_clcb_dealloc(p_clcb);
+
+            }
+        }
+
+        btu_stop_timer (&p_tcb->rsp_timer_ent);
+        btu_stop_timer (&p_tcb->ind_ack_timer_ent);
+        btu_stop_timer (&p_tcb->conf_timer_ent);
+        gatt_free_pending_ind(p_tcb);
+
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            p_reg = &gatt_cb.cl_rcb[i];
+            if (p_reg->in_use && p_reg->app_cb.p_conn_cb)
+            {
+                conn_id = GATT_CREATE_CONN_ID(p_tcb->tcb_idx, p_reg->gatt_if);
+                GATT_TRACE_DEBUG3 ("found p_reg tcb_idx=%d gatt_if=%d  conn_id=0x%x", p_tcb->tcb_idx, p_reg->gatt_if, conn_id);
+                (*p_reg->app_cb.p_conn_cb)(p_reg->gatt_if,  bda, conn_id, FALSE, reason);
+            }
+        }
+        memset(p_tcb, 0, sizeof(tGATT_TCB));
+
+    }
+    GATT_TRACE_DEBUG0 ("exit gatt_cleanup_upon_disc ");
+}
+/*******************************************************************************
+**
+** Function         gatt_dbg_req_op_name
+**
+** Description      Get op code description name, for debug information.
+**
+** Returns          UINT8 *: name of the operation.
+**
+*******************************************************************************/
+UINT8 * gatt_dbg_op_name(UINT8 op_code)
+{
+    UINT8 pseduo_op_code_idx = op_code & (~GATT_WRITE_CMD_MASK);
+
+    if (op_code == GATT_CMD_WRITE )
+    {
+        pseduo_op_code_idx = 0x14; /* just an index to op_code_name */
+
+    }
+
+    if (op_code == GATT_SIGN_CMD_WRITE)
+    {
+        pseduo_op_code_idx = 0x15; /* just an index to op_code_name */
+    }
+
+    if (pseduo_op_code_idx <= GATT_OP_CODE_MAX)
+        return(UINT8*) op_code_name[pseduo_op_code_idx];
+    else
+        return(UINT8 *)"Op Code Exceed Max";
+}
+
+/*******************************************************************************
+**
+** Function         gatt_dbg_display_uuid
+**
+** Description      Disaplay the UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+void gatt_dbg_display_uuid(tBT_UUID bt_uuid)
+{
+    char str_buf[50];
+    int x = 0;
+
+    if (bt_uuid.len == LEN_UUID_16)
+    {
+        sprintf(str_buf, "0x%04x", bt_uuid.uu.uuid16);
+    }
+    else if (bt_uuid.len == LEN_UUID_128)
+    {
+        x += sprintf(&str_buf[x], "0x%02x%02x%02x%02x%02x%02x%02x%02x",
+                     bt_uuid.uu.uuid128[15], bt_uuid.uu.uuid128[14],
+                     bt_uuid.uu.uuid128[13], bt_uuid.uu.uuid128[12],
+                     bt_uuid.uu.uuid128[11], bt_uuid.uu.uuid128[10],
+                     bt_uuid.uu.uuid128[9], bt_uuid.uu.uuid128[8]);
+        sprintf(&str_buf[x], "%02x%02x%02x%02x%02x%02x%02x%02x",
+                bt_uuid.uu.uuid128[7], bt_uuid.uu.uuid128[6],
+                bt_uuid.uu.uuid128[5], bt_uuid.uu.uuid128[4],
+                bt_uuid.uu.uuid128[3], bt_uuid.uu.uuid128[2],
+                bt_uuid.uu.uuid128[1], bt_uuid.uu.uuid128[0]);
+    }
+    else
+        BCM_STRNCPY_S(str_buf, sizeof(str_buf), "Unknown UUID 0", 15);
+
+    GATT_TRACE_DEBUG1 ("UUID=[%s]", str_buf);
+
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_is_bg_dev_for_app
+**
+** Description      find is this one of the background devices for the application
+**
+** Returns          TRUE this is one of the background devices for the  application
+**
+*******************************************************************************/
+BOOLEAN gatt_is_bg_dev_for_app(tGATT_BG_CONN_DEV *p_dev, tGATT_IF gatt_if)
+{
+    UINT8   i;
+
+    for (i = 0; i < GATT_MAX_APPS; i ++ )
+    {
+        if (p_dev->in_use && (p_dev->gatt_if[i] == gatt_if))
+        {
+            return TRUE;
+        }
+    }
+    return FALSE;
+}
+/*******************************************************************************
+**
+** Function         gatt_find_bg_dev
+**
+** Description      find background connection device from the list.
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+tGATT_BG_CONN_DEV * gatt_find_bg_dev(BD_ADDR remote_bda)
+{
+    tGATT_BG_CONN_DEV    *p_dev_list = &gatt_cb.bgconn_dev[0];
+    UINT8   i;
+
+    for (i = 0; i < GATT_MAX_BG_CONN_DEV; i ++, p_dev_list ++)
+    {
+        if (p_dev_list->in_use && !memcmp(p_dev_list->remote_bda, remote_bda, BD_ADDR_LEN))
+        {
+            return p_dev_list;
+        }
+    }
+    return NULL;
+}
+/*******************************************************************************
+**
+** Function         gatt_alloc_bg_dev
+**
+** Description      allocate a background connection device record
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+tGATT_BG_CONN_DEV * gatt_alloc_bg_dev(BD_ADDR remote_bda)
+{
+    tGATT_BG_CONN_DEV    *p_dev_list = &gatt_cb.bgconn_dev[0];
+    UINT8   i;
+
+    for (i = 0; i < GATT_MAX_BG_CONN_DEV; i ++, p_dev_list ++)
+    {
+        if (!p_dev_list->in_use)
+        {
+            p_dev_list->in_use = TRUE;
+            memcpy(p_dev_list->remote_bda, remote_bda, BD_ADDR_LEN);
+
+            return p_dev_list;
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_add_bg_dev_list
+**
+** Description      add/remove device from the back ground connection device list
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+BOOLEAN gatt_add_bg_dev_list(tGATT_IF gatt_if, BD_ADDR bd_addr)
+{
+    tGATT_BG_CONN_DEV   *p_dev = NULL;
+    UINT8   i;
+
+    if ((p_dev = gatt_find_bg_dev(bd_addr)) == NULL)
+    {
+        p_dev = gatt_alloc_bg_dev(bd_addr);
+    }
+
+    if (p_dev)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            if (p_dev->gatt_if[i] == gatt_if)
+            {
+                GATT_TRACE_ERROR0("device already in list");
+                return FALSE;
+            }
+            else if (p_dev->gatt_if[i] == 0)
+            {
+                GATT_TRACE_DEBUG0("add device into list");
+                p_dev->gatt_if[i] = gatt_if;
+                return TRUE;
+            }
+        }
+    }
+
+    GATT_TRACE_ERROR0("no device record available");
+
+    return FALSE;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_remove_bg_dev_for_app
+**
+** Description      Remove the application interface for the specified background device
+**
+** Returns          Boolean
+**
+*******************************************************************************/
+BOOLEAN gatt_remove_bg_dev_for_app(tGATT_IF gatt_if, BD_ADDR bd_addr)
+{
+    tGATT_TCB    *p_tcb = gatt_find_tcb_by_addr(bd_addr);
+    BOOLEAN       status;
+
+    if (p_tcb)
+        gatt_update_app_use_link_flag(gatt_if, p_tcb, FALSE, FALSE);
+    status = gatt_update_auto_connect_dev(gatt_if, FALSE, bd_addr);
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_get_num_apps_for_bg_dev
+**
+** Description      Gte the number of applciations for the specified background device
+**
+** Returns          UINT8 total number fo applications
+**
+*******************************************************************************/
+UINT8 gatt_get_num_apps_for_bg_dev(BD_ADDR bd_addr)
+{
+    tGATT_BG_CONN_DEV   *p_dev = NULL;
+    UINT8   i;
+    UINT8   cnt = 0;
+
+    if ((p_dev = gatt_find_bg_dev(bd_addr)) != NULL)
+    {
+        for (i = 0; i < GATT_MAX_APPS; i ++)
+        {
+            if (p_dev->gatt_if[i])
+                cnt++;
+        }
+    }
+    return cnt;
+}
+
+/*******************************************************************************
+**
+** Function         gatt_find_app_for_bg_dev
+**
+** Description      find the application interface for the specified background device
+**
+** Returns          Boolean
+**
+*******************************************************************************/
+BOOLEAN gatt_find_app_for_bg_dev(BD_ADDR bd_addr, tGATT_IF *p_gatt_if)
+{
+    tGATT_BG_CONN_DEV   *p_dev = NULL;
+    UINT8   i;
+    BOOLEAN ret = FALSE;
+
+    if ((p_dev = gatt_find_bg_dev(bd_addr)) == NULL)
+    {
+        return ret;
+    }
+
+    for (i = 0; i < GATT_MAX_APPS; i ++)
+    {
+        if (p_dev->gatt_if[i] != 0 )
+        {
+            *p_gatt_if = p_dev->gatt_if[i];
+            ret = TRUE;
+            break;
+        }
+    }
+    return ret;
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_remove_bg_dev_from_list
+**
+** Description      add/remove device from the back ground connection device list
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+BOOLEAN gatt_remove_bg_dev_from_list(tGATT_IF gatt_if, BD_ADDR bd_addr)
+{
+    tGATT_BG_CONN_DEV   *p_dev = NULL;
+    UINT8   i, j;
+    BOOLEAN ret = FALSE;
+
+    if ((p_dev = gatt_find_bg_dev(bd_addr)) == NULL)
+    {
+        return ret;
+    }
+
+    for (i = 0; i < GATT_MAX_APPS && p_dev->gatt_if[i] > 0; i ++)
+    {
+        if (p_dev->gatt_if[i] == gatt_if)
+        {
+            p_dev->gatt_if[i] = 0;
+
+            for (j = i + 1; j < GATT_MAX_APPS; j ++)
+                p_dev->gatt_if[j - 1] = p_dev->gatt_if[j];
+
+            if (p_dev->gatt_if[0] == 0)
+            {
+                ret = BTM_BleUpdateBgConnDev(FALSE, p_dev->remote_bda);
+                memset(p_dev, 0, sizeof(tGATT_BG_CONN_DEV));
+            }
+            else
+                ret = TRUE;
+
+            break;
+        }
+    }
+
+    return ret;
+}
+/*******************************************************************************
+**
+** Function         gatt_deregister_bgdev_list
+**
+** Description      deregister all related back ground connetion device.
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+void gatt_deregister_bgdev_list(tGATT_IF gatt_if)
+{
+    tGATT_BG_CONN_DEV    *p_dev_list = &gatt_cb.bgconn_dev[0];
+    UINT8 i , j, k;
+
+    for (i = 0 ; i <GATT_MAX_BG_CONN_DEV; i ++, p_dev_list ++ )
+    {
+        if (p_dev_list->in_use)
+        {
+            for (j = 0; j < GATT_MAX_APPS; j ++)
+            {
+                if (p_dev_list->gatt_if[j] == 0)
+                    break;
+                else if (p_dev_list->gatt_if[j] == gatt_if)
+                {
+                    for (k = j + 1; k < GATT_MAX_APPS; k ++)
+                        p_dev_list->gatt_if[k - 1] = p_dev_list->gatt_if[k];
+
+                    if (p_dev_list->gatt_if[0] == 0)
+                    {
+                        BTM_BleUpdateBgConnDev(FALSE, p_dev_list->remote_bda);
+                        memset(p_dev_list, 0, sizeof(tGATT_BG_CONN_DEV));
+                        break;
+                    }
+                }
+            }
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         gatt_reset_bgdev_list
+**
+** Description      reset bg device list
+**
+** Returns          pointer to the device record
+**
+*******************************************************************************/
+void gatt_reset_bgdev_list(void)
+{
+    memset(&gatt_cb.bgconn_dev, 0 , sizeof(tGATT_BG_CONN_DEV)*GATT_MAX_BG_CONN_DEV);
+
+}
+/*******************************************************************************
+**
+** Function         gatt_update_auto_connect_dev
+**
+** Description      This function add or remove a device for background connection
+**                  procedure.
+**
+** Parameters       gatt_if: Application ID.
+**                  add: add peer device
+**                  bd_addr: peer device address.
+**
+** Returns          TRUE if connection started; FALSE if connection start failure.
+**
+*******************************************************************************/
+BOOLEAN gatt_update_auto_connect_dev (tGATT_IF gatt_if, BOOLEAN add, BD_ADDR bd_addr)
+{
+    BOOLEAN         ret = FALSE, exist_dev = FALSE;
+    tGATT_REG        *p_reg;
+    tGATT_TCB       *p_tcb = gatt_find_tcb_by_addr(bd_addr);
+
+    GATT_TRACE_API0 ("gatt_update_auto_connect_dev ");
+    /* Make sure app is registered */
+    if ((p_reg = gatt_get_regcb(gatt_if)) == NULL)
+    {
+        GATT_TRACE_ERROR1("gatt_update_auto_connect_dev - gatt_if is not registered", gatt_if);
+        return(FALSE);
+    }
+
+    if (add)
+    {
+        /* new device */
+        if (gatt_find_bg_dev(bd_addr))
+            exist_dev = TRUE;
+
+        if (gatt_add_bg_dev_list(gatt_if, bd_addr))
+        {
+            if (!exist_dev)
+            {
+                ret = BTM_BleUpdateBgConnDev(TRUE, bd_addr);
+            }
+            else
+                ret = TRUE;
+
+            /* if a connected device, update the link holding number */
+            if (p_tcb != NULL)
+                gatt_update_app_use_link_flag(gatt_if, p_tcb, TRUE, TRUE);
+        }
+    }
+    else
+    {
+        ret = gatt_remove_bg_dev_from_list(gatt_if, bd_addr);
+    }
+    return ret;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         gatt_get_conn_id
+**
+** Description      This function returns a connecttion handle to a ATT server
+**                  if the server is already connected
+**
+** Parameters       gatt_if: client interface.
+**                  bd_addr: peer device address.
+**
+** Returns          Connection handle or invalid handle value
+**
+*******************************************************************************/
+UINT16 gatt_get_conn_id (tGATT_IF gatt_if, BD_ADDR bd_addr)
+{
+    tGATT_REG       *p_reg;
+    tGATT_CLCB      *p_clcb;
+    tGATT_TCB       *p_tcb;
+    UINT8           i;
+
+    GATT_TRACE_API1 ("GATTC_GetConnIfConnected gatt_if=%d", gatt_if);
+    /* Do we have a transport to the peer ? If not, we are not connected */
+    if ((p_tcb = gatt_find_tcb_by_addr(bd_addr)) == NULL)
+    {
+        GATT_TRACE_EVENT0 ("GATTC_GetConnIfConnected - no TCB found");
+        return(GATT_INVALID_CONN_ID);
+    }
+
+    /* Make sure app is registered */
+    if ((p_reg = gatt_get_regcb(gatt_if)) == NULL)
+    {
+        GATT_TRACE_ERROR1("GATTC_GetConnIfConnected - gatt_if is not registered", gatt_if);
+        return(GATT_INVALID_CONN_ID);
+    }
+
+    /* Now see if the app already has a client control block to that peer */
+    for (i = 0, p_clcb = gatt_cb.clcb; i < GATT_CL_MAX_LCB; i++, p_clcb++)
+    {
+        if ( p_clcb->in_use && (p_clcb->p_reg == p_reg) && (p_clcb->p_tcb == p_tcb) )
+        {
+            return(p_clcb->conn_id);
+        }
+    }
+
+    /* If here, failed to allocate a client control block */
+    GATT_TRACE_ERROR1 ("gatt_get_conn_id: not connected- gatt_if: %u", gatt_if);
+    return(GATT_INVALID_CONN_ID);
+}
+
+
+
+
+#endif
+
+
diff --git a/stack/hcic/hciblecmds.c b/stack/hcic/hciblecmds.c
new file mode 100644
index 0000000..417297b
--- /dev/null
+++ b/stack/hcic/hciblecmds.c
@@ -0,0 +1,751 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains function of the HCIC unit to format and send HCI
+ *  commands.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "hcidefs.h"
+#include "btu.h"
+
+#include <stddef.h>
+#include <string.h>
+
+#if (defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)
+
+BOOLEAN btsnd_hcic_ble_reset(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp,  HCI_BLE_RESET);
+    UINT8_TO_STREAM  (pp,  0);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+
+}
+
+BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_EVENT_MASK)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_EVENT_MASK;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_SET_EVENT_MASK);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_EVENT_MASK);
+    ARRAY8_TO_STREAM (pp, event_mask);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+
+BOOLEAN btsnd_hcic_ble_read_buffer_size (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_BUFFER_SIZE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_LOCAL_SPT_FEAT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8])
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_USED_FEAT_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_USED_FEAT_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_LOCAL_SPT_FEAT);
+    ARRAY_TO_STREAM (pp, feat_set, HCIC_PARAM_SIZE_SET_USED_FEAT_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_bda)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_RANDOM_ADDR);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD);
+
+    BDADDR_TO_STREAM (pp, random_bda);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max,
+                                       UINT8 adv_type, UINT8 addr_type_own,
+                                       UINT8 addr_type_dir, BD_ADDR direct_bda,
+                                       UINT8 channel_map, UINT8 adv_filter_policy)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS ;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_ADV_PARAMS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS );
+
+    UINT16_TO_STREAM (pp, adv_int_min);
+    UINT16_TO_STREAM (pp, adv_int_max);
+    UINT8_TO_STREAM (pp, adv_type);
+    UINT8_TO_STREAM (pp, addr_type_own);
+    UINT8_TO_STREAM (pp, addr_type_dir);
+    BDADDR_TO_STREAM (pp, direct_bda);
+    UINT8_TO_STREAM (pp, channel_map);
+    UINT8_TO_STREAM (pp, adv_filter_policy);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_ADV_CHNL_TX_POWER);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+
+}
+
+BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA + 1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA + 1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_ADV_DATA);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA + 1);
+
+    memset(pp, 0, HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA);
+
+    if (p_data != NULL && data_len > 0)
+    {
+        if (data_len > HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA)
+            data_len = HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA;
+
+        UINT8_TO_STREAM (pp, data_len);
+
+        ARRAY_TO_STREAM (pp, p_data, data_len);
+    }
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+
+    return (TRUE);
+}
+BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP + 1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP + 1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_SCAN_RSP_DATA);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP + 1);
+
+    memset(pp, 0, HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP);
+
+    if (p_scan_rsp != NULL && data_len > 0)
+    {
+
+        if (data_len > HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP )
+            data_len = HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP;
+
+        UINT8_TO_STREAM (pp, data_len);
+
+        ARRAY_TO_STREAM (pp, p_scan_rsp, data_len);
+    }
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_ADV_ENABLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_ADV_ENABLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_ADV_ENABLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_ADV_ENABLE);
+
+    UINT8_TO_STREAM (pp, adv_enable);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type,
+                                          UINT16 scan_int, UINT16 scan_win,
+                                          UINT8 addr_type_own, UINT8 scan_filter_policy)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_SCAN_PARAMS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM);
+
+    UINT8_TO_STREAM (pp, scan_type);
+    UINT16_TO_STREAM (pp, scan_int);
+    UINT16_TO_STREAM (pp, scan_win);
+    UINT8_TO_STREAM (pp, addr_type_own);
+    UINT8_TO_STREAM (pp, scan_filter_policy);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_WRITE_SCAN_ENABLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE);
+
+    UINT8_TO_STREAM (pp, scan_enable);
+    UINT8_TO_STREAM (pp, duplicate);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+/* link layer connection management commands */
+BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win,
+                                       UINT8 init_filter_policy,
+                                       UINT8 addr_type_peer, BD_ADDR bda_peer,
+                                       UINT8 addr_type_own,
+                                       UINT16 conn_int_min, UINT16 conn_int_max,
+                                       UINT16 conn_latency, UINT16 conn_timeout,
+                                       UINT16 min_ce_len, UINT16 max_ce_len)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_CREATE_LL_CONN);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN);
+
+    UINT16_TO_STREAM (pp, scan_int);
+    UINT16_TO_STREAM (pp, scan_win);
+    UINT8_TO_STREAM (pp, init_filter_policy);
+
+    UINT8_TO_STREAM (pp, addr_type_peer);
+    BDADDR_TO_STREAM (pp, bda_peer);
+    UINT8_TO_STREAM (pp, addr_type_own);
+
+    UINT16_TO_STREAM (pp, conn_int_min);
+    UINT16_TO_STREAM (pp, conn_int_max);
+    UINT16_TO_STREAM (pp, conn_latency);
+    UINT16_TO_STREAM (pp, conn_timeout);
+
+    UINT16_TO_STREAM (pp, min_ce_len);
+    UINT16_TO_STREAM (pp, max_ce_len);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_create_conn_cancel (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_CREATE_CONN_CANCEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_read_white_list_size (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_WHITE_LIST_SIZE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_clear_white_list (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CLEAR_WHITE_LIST)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CLEAR_WHITE_LIST;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_CLEAR_WHITE_LIST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CLEAR_WHITE_LIST);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_ADD_WHITE_LIST)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_ADD_WHITE_LIST;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_ADD_WHITE_LIST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_ADD_WHITE_LIST);
+
+    UINT8_TO_STREAM (pp, addr_type);
+    BDADDR_TO_STREAM (pp, bda);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_REMOVE_WHITE_LIST)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_REMOVE_WHITE_LIST;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_REMOVE_WHITE_LIST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_REMOVE_WHITE_LIST);
+
+    UINT8_TO_STREAM (pp, addr_type);
+    BDADDR_TO_STREAM (pp, bda);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle,
+                                           UINT16 conn_int_min, UINT16 conn_int_max,
+                                           UINT16 conn_latency, UINT16 conn_timeout,
+                                           UINT16 min_ce_len, UINT16 max_ce_len)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_UPD_LL_CONN_PARAMS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    UINT16_TO_STREAM (pp, conn_int_min);
+    UINT16_TO_STREAM (pp, conn_int_max);
+    UINT16_TO_STREAM (pp, conn_latency);
+    UINT16_TO_STREAM (pp, conn_timeout);
+    UINT16_TO_STREAM (pp, min_ce_len);
+    UINT16_TO_STREAM (pp, max_ce_len);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8  chnl_map[HCIC_BLE_CHNL_MAP_SIZE])
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_SET_HOST_CHNL_CLASS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS);
+
+    ARRAY_TO_STREAM (pp, chnl_map, HCIC_BLE_CHNL_MAP_SIZE);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CHNL_MAP)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CHNL_MAP;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_CHNL_MAP);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CHNL_MAP);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_read_remote_feat (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_REMOTE_FEAT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+/* security management commands */
+BOOLEAN btsnd_hcic_ble_encrypt (UINT8 *key, UINT8 key_len,
+                                UINT8 *plain_text, UINT8 pt_len,
+                                void *p_cmd_cplt_cback)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(sizeof(BT_HDR) + sizeof (void *) +
+                            HCIC_PARAM_SIZE_BLE_ENCRYPT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_ENCRYPT;
+    p->offset = sizeof(void *);
+
+    *((void **)pp) = p_cmd_cplt_cback;  /* Store command complete callback in buffer */
+    pp += sizeof(void *);               /* Skip over callback pointer */
+
+
+    UINT16_TO_STREAM (pp, HCI_BLE_ENCRYPT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_ENCRYPT);
+
+    memset(pp, 0, HCIC_PARAM_SIZE_BLE_ENCRYPT);
+
+    if (key_len > HCIC_BLE_ENCRYT_KEY_SIZE) key_len = HCIC_BLE_ENCRYT_KEY_SIZE;
+    if (pt_len > HCIC_BLE_ENCRYT_KEY_SIZE) pt_len = HCIC_BLE_ENCRYT_KEY_SIZE;
+
+    ARRAY_TO_STREAM (pp, key, key_len);
+    pp += (HCIC_BLE_ENCRYT_KEY_SIZE - key_len);
+    ARRAY_TO_STREAM (pp, plain_text, pt_len);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(sizeof(BT_HDR) + sizeof (void *) +
+                        HCIC_PARAM_SIZE_BLE_RAND)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_RAND;
+    p->offset = sizeof(void *);
+
+    *((void **)pp) = p_cmd_cplt_cback;  /* Store command complete callback in buffer */
+    pp += sizeof(void *);               /* Skip over callback pointer */
+
+    UINT16_TO_STREAM (pp, HCI_BLE_RAND);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_RAND);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_start_enc (UINT16 handle, UINT8 rand[HCIC_BLE_RAND_DI_SIZE],
+                                UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE])
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_BLE_START_ENC)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_BLE_START_ENC;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_START_ENC);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_BLE_START_ENC);
+
+    UINT16_TO_STREAM (pp, handle);
+    ARRAY_TO_STREAM (pp, rand, HCIC_BLE_RAND_DI_SIZE);
+    UINT16_TO_STREAM (pp, ediv);
+    ARRAY_TO_STREAM (pp, ltk, HCIC_BLE_ENCRYT_KEY_SIZE);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE])
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_LTK_REQ_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_LTK_REQ_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_LTK_REQ_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_LTK_REQ_REPLY);
+
+    UINT16_TO_STREAM (pp, handle);
+    ARRAY_TO_STREAM (pp, ltk, HCIC_BLE_ENCRYT_KEY_SIZE);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_LTK_REQ_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_ble_read_supported_states (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_BLE_READ_SUPPORTED_STATES);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+#endif
diff --git a/stack/hcic/hcicmds.c b/stack/hcic/hcicmds.c
new file mode 100644
index 0000000..71a5dc5
--- /dev/null
+++ b/stack/hcic/hcicmds.c
@@ -0,0 +1,3361 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains function of the HCIC unit to format and send HCI
+ *  commands.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "hcidefs.h"
+#include "btu.h"
+
+#include <stddef.h>
+#include <string.h>
+
+#if defined (LMP_TEST)
+#include <script.h>
+#define btu_hcif_send_cmd(p1, p2) HCI_CMD_TO_LOWER((p2))
+#else
+#include "btm_int.h"    /* Included for UIPC_* macro definitions */
+#endif
+
+BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration, UINT8 response_cnt)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_INQUIRY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_INQUIRY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_INQUIRY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_INQUIRY);
+
+    LAP_TO_STREAM   (pp, inq_lap);
+    UINT8_TO_STREAM (pp, duration);
+    UINT8_TO_STREAM (pp, response_cnt);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_inq_cancel(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_INQ_CANCEL)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_INQ_CANCEL;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_INQUIRY_CANCEL);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_INQ_CANCEL);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_per_inq_mode (UINT16 max_period, UINT16 min_period,
+                                 const LAP inq_lap, UINT8 duration, UINT8 response_cnt)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_PER_INQ_MODE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_PER_INQ_MODE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_PERIODIC_INQUIRY_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_PER_INQ_MODE);
+
+    UINT16_TO_STREAM (pp, max_period);
+    UINT16_TO_STREAM (pp, min_period);
+    LAP_TO_STREAM    (pp, inq_lap);
+    UINT8_TO_STREAM  (pp, duration);
+    UINT8_TO_STREAM  (pp, response_cnt);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_exit_per_inq (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_EXIT_PER_INQ)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_EXIT_PER_INQ;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_EXIT_PERIODIC_INQUIRY_MODE);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_EXIT_PER_INQ);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+
+BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types,
+                               UINT8 page_scan_rep_mode, UINT8 page_scan_mode,
+                               UINT16 clock_offset, UINT8 allow_switch)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CREATE_CONN)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+#ifndef BT_10A
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CREATE_CONN;
+#else
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CREATE_CONN - 1;
+#endif
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CREATE_CONNECTION);
+#ifndef BT_10A
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CREATE_CONN);
+#else
+    UINT8_TO_STREAM  (pp, (HCIC_PARAM_SIZE_CREATE_CONN - 1));
+#endif
+    BDADDR_TO_STREAM (pp, dest);
+    UINT16_TO_STREAM (pp, packet_types);
+    UINT8_TO_STREAM  (pp, page_scan_rep_mode);
+    UINT8_TO_STREAM  (pp, page_scan_mode);
+    UINT16_TO_STREAM (pp, clock_offset);
+#if !defined (BT_10A)
+    UINT8_TO_STREAM  (pp, allow_switch);
+#endif
+/* If calling from LMP_TEST or ScriptEngine, then send HCI command immediately */
+#if (!defined (LMP_TEST) && !defined(BTISE))
+    btm_acl_paging (p, dest);
+#else
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+#endif
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_disconnect (UINT16 handle, UINT8 reason)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_DISCONNECT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_DISCONNECT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_DISCONNECT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_DISCONNECT);
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, reason);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+/* If calling from LMP_TEST or ScriptEngine, then send HCI command immediately */
+#if (!defined (LMP_TEST) && !defined(BTISE))
+// btla-specific ++
+    // btm_acl_set_discing(TRUE);
+// btla-specific --
+#endif
+    return (TRUE);
+}
+
+#if BTM_SCO_INCLUDED == TRUE
+BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_ADD_SCO_CONN)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_ADD_SCO_CONN;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_ADD_SCO_CONNECTION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_ADD_SCO_CONN);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, packet_types);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+#endif /* BTM_SCO_INCLUDED */
+
+BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CREATE_CONN_CANCEL)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CREATE_CONN_CANCEL;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CREATE_CONNECTION_CANCEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CREATE_CONN_CANCEL);
+
+    BDADDR_TO_STREAM (pp, dest);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_accept_conn (BD_ADDR dest, UINT8 role)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_ACCEPT_CONN)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_ACCEPT_CONN;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_ACCEPT_CONNECTION_REQUEST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_ACCEPT_CONN);
+    BDADDR_TO_STREAM (pp, dest);
+    UINT8_TO_STREAM  (pp, role);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_reject_conn (BD_ADDR dest, UINT8 reason)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_REJECT_CONN)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_REJECT_CONN;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_REJECT_CONNECTION_REQUEST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_REJECT_CONN);
+
+    BDADDR_TO_STREAM (pp, dest);
+    UINT8_TO_STREAM (pp, reason);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr, LINK_KEY link_key)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM  (pp, HCI_LINK_KEY_REQUEST_REPLY);
+    UINT8_TO_STREAM   (pp, HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY);
+
+    BDADDR_TO_STREAM  (pp, bd_addr);
+    ARRAY16_TO_STREAM (pp, link_key);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_LINK_KEY_REQUEST_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr, UINT8 pin_code_len,
+                                    PIN_CODE pin_code)
+{
+    BT_HDR *p;
+    UINT8  *pp;
+    int     i;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM  (pp, HCI_PIN_CODE_REQUEST_REPLY);
+    UINT8_TO_STREAM   (pp, HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY);
+
+    BDADDR_TO_STREAM  (pp, bd_addr);
+    UINT8_TO_STREAM   (pp, pin_code_len);
+
+    for (i = 0; i < pin_code_len; i++)
+        *pp++ = *pin_code++;
+
+    for (; i < PIN_CODE_LEN; i++)
+        *pp++ = 0;
+
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_PIN_CODE_REQUEST_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CHANGE_CONN_TYPE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CHANGE_CONN_TYPE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CHANGE_CONN_PACKET_TYPE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CHANGE_CONN_TYPE);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, packet_types);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_auth_request (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_AUTHENTICATION_REQUESTED);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_CONN_ENCRYPT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_CONN_ENCRYPT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_CONN_ENCRYPTION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_CONN_ENCRYPT);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, enable);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_change_link_key (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CHANGE_CONN_LINK_KEY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_master_link_key (BOOLEAN key_flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_MASTER_LINK_KEY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_MASTER_LINK_KEY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_MASTER_LINK_KEY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_MASTER_LINK_KEY);
+
+    UINT8_TO_STREAM  (pp, key_flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr, UINT8 page_scan_rep_mode,
+                                 UINT8 page_scan_mode, UINT16 clock_offset)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_RMT_NAME_REQ)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_RMT_NAME_REQ;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_RMT_NAME_REQUEST);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_RMT_NAME_REQ);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, page_scan_rep_mode);
+    UINT8_TO_STREAM  (pp, page_scan_mode);
+    UINT16_TO_STREAM (pp, clock_offset);
+
+/* If calling from LMP_TEST or ScriptEngine, then send HCI command immediately */
+#if (!defined (LMP_TEST) && !defined(BTISE))
+    btm_acl_paging (p, bd_addr);
+#else
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+#endif
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rmt_name_req_cancel (BD_ADDR bd_addr)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_RMT_NAME_REQUEST_CANCEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rmt_features_req (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_RMT_FEATURES);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rmt_ext_features (UINT16 handle, UINT8 page_num)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_RMT_EXT_FEATURES)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_RMT_EXT_FEATURES;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_RMT_EXT_FEATURES);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_RMT_EXT_FEATURES);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM (pp, page_num);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rmt_ver_req (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_RMT_VERSION_INFO);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID, p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_rmt_clk_offset (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_RMT_CLOCK_OFFSET);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_lmp_handle (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LMP_HANDLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle, UINT32 tx_bw,
+                                    UINT32 rx_bw, UINT16 max_latency, UINT16 voice,
+                                    UINT8 retrans_effort, UINT16 packet_types)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SETUP_ESCO)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SETUP_ESCO;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SETUP_ESCO_CONNECTION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SETUP_ESCO);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT32_TO_STREAM (pp, tx_bw);
+    UINT32_TO_STREAM (pp, rx_bw);
+    UINT16_TO_STREAM (pp, max_latency);
+    UINT16_TO_STREAM (pp, voice);
+    UINT8_TO_STREAM  (pp, retrans_effort);
+    UINT16_TO_STREAM (pp, packet_types);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr, UINT32 tx_bw,
+                                     UINT32 rx_bw, UINT16 max_latency,
+                                     UINT16 content_fmt, UINT8 retrans_effort,
+                                     UINT16 packet_types)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_ACCEPT_ESCO)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_ACCEPT_ESCO;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_ACCEPT_ESCO_CONNECTION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_ACCEPT_ESCO);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT32_TO_STREAM (pp, tx_bw);
+    UINT32_TO_STREAM (pp, rx_bw);
+    UINT16_TO_STREAM (pp, max_latency);
+    UINT16_TO_STREAM (pp, content_fmt);
+    UINT8_TO_STREAM  (pp, retrans_effort);
+    UINT16_TO_STREAM (pp, packet_types);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_REJECT_ESCO)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_REJECT_ESCO;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_REJECT_ESCO_CONNECTION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_REJECT_ESCO);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, reason);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_hold_mode (UINT16 handle, UINT16 max_hold_period,
+                              UINT16 min_hold_period)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_HOLD_MODE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_HOLD_MODE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_HOLD_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_HOLD_MODE);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, max_hold_period);
+    UINT16_TO_STREAM (pp, min_hold_period);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_sniff_mode (UINT16 handle, UINT16 max_sniff_period,
+                               UINT16 min_sniff_period, UINT16 sniff_attempt,
+                               UINT16 sniff_timeout)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SNIFF_MODE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SNIFF_MODE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SNIFF_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SNIFF_MODE);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, max_sniff_period);
+    UINT16_TO_STREAM (pp, min_sniff_period);
+    UINT16_TO_STREAM (pp, sniff_attempt);
+    UINT16_TO_STREAM (pp, sniff_timeout);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_exit_sniff_mode (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_EXIT_SNIFF_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return TRUE;
+}
+
+BOOLEAN btsnd_hcic_park_mode (UINT16 handle, UINT16 beacon_max_interval,
+                              UINT16 beacon_min_interval)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_PARK_MODE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_PARK_MODE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_PARK_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_PARK_MODE);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, beacon_max_interval);
+    UINT16_TO_STREAM (pp, beacon_min_interval);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_exit_park_mode (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_EXIT_PARK_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return TRUE;
+}
+
+BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags, UINT8 service_type,
+                              UINT32 token_rate, UINT32 peak, UINT32 latency,
+                              UINT32 delay_var)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_QOS_SETUP)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_QOS_SETUP;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_QOS_SETUP);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_QOS_SETUP);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, flags);
+    UINT8_TO_STREAM  (pp, service_type);
+    UINT32_TO_STREAM (pp, token_rate);
+    UINT32_TO_STREAM (pp, peak);
+    UINT32_TO_STREAM (pp, latency);
+    UINT32_TO_STREAM (pp, delay_var);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_role_discovery (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_ROLE_DISCOVERY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SWITCH_ROLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SWITCH_ROLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SWITCH_ROLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SWITCH_ROLE);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, role);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_policy_set (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_POLICY_SETTINGS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_policy_set (UINT16 handle, UINT16 settings)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_POLICY_SET)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_POLICY_SET;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_WRITE_POLICY_SETTINGS);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_WRITE_POLICY_SET);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, settings);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_def_policy_set (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_DEF_POLICY_SET)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_DEF_POLICY_SET;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_DEF_POLICY_SETTINGS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_DEF_POLICY_SET);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_def_policy_set (UINT16 settings)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_WRITE_DEF_POLICY_SETTINGS);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET);
+
+    UINT16_TO_STREAM (pp, settings);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_flow_specification(UINT16 handle, UINT8 flags, UINT8 flow_direct,
+                                      UINT8  service_type, UINT32 token_rate,
+                                      UINT32 token_bucket_size, UINT32 peak,
+                                      UINT32 latency)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_FLOW_SPEC)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_FLOW_SPEC;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_FLOW_SPECIFICATION);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_FLOW_SPEC);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, flags);
+    UINT8_TO_STREAM  (pp, flow_direct);
+    UINT8_TO_STREAM  (pp, service_type);
+    UINT32_TO_STREAM (pp, token_rate);
+    UINT32_TO_STREAM (pp, token_bucket_size);
+    UINT32_TO_STREAM (pp, peak);
+    UINT32_TO_STREAM (pp, latency);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_event_mask(UINT8 local_controller_id, BT_EVENT_MASK event_mask)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_EVENT_MASK)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_EVENT_MASK;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_EVENT_MASK);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_EVENT_MASK);
+    ARRAY8_TO_STREAM (pp, event_mask);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_event_mask_page_2 (UINT8 local_controller_id, BT_EVENT_MASK event_mask)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_EVENT_MASK_PAGE_2);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2);
+    ARRAY8_TO_STREAM (pp, event_mask);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_reset (UINT8 local_controller_id)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_RESET)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_RESET;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_RESET);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_RESET);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+/* If calling from LMP_TEST or ScriptEngine, then send HCI command immediately */
+#if (!defined (LMP_TEST) && !defined(BTISE))
+    if (local_controller_id == LOCAL_BR_EDR_CONTROLLER_ID)
+    {
+        btm_acl_reset_paging ();
+        btm_acl_set_discing (FALSE);
+    }
+#endif
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_event_filter (UINT8 filt_type, UINT8 filt_cond_type,
+                                     UINT8 *filt_cond, UINT8 filt_cond_len)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    /* Use buffer large enough to hold all sizes in this command */
+    if ((p = HCI_GET_CMD_BUF(2 + filt_cond_len)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_EVENT_FILTER);
+
+    if (filt_type)
+    {
+        p->len = (UINT16)(HCIC_PREAMBLE_SIZE + 2 + filt_cond_len);
+        UINT8_TO_STREAM (pp, (UINT8)(2 + filt_cond_len));
+
+        UINT8_TO_STREAM (pp, filt_type);
+        UINT8_TO_STREAM (pp, filt_cond_type);
+
+        if (filt_cond_type == HCI_FILTER_COND_DEVICE_CLASS)
+        {
+            DEVCLASS_TO_STREAM (pp, filt_cond);
+            filt_cond += DEV_CLASS_LEN;
+            DEVCLASS_TO_STREAM (pp, filt_cond);
+            filt_cond += DEV_CLASS_LEN;
+
+            filt_cond_len -= (2 * DEV_CLASS_LEN);
+        }
+        else if (filt_cond_type == HCI_FILTER_COND_BD_ADDR)
+        {
+            BDADDR_TO_STREAM (pp, filt_cond);
+            filt_cond += BD_ADDR_LEN;
+
+            filt_cond_len -= BD_ADDR_LEN;
+        }
+
+        if (filt_cond_len)
+            ARRAY_TO_STREAM (pp, filt_cond, filt_cond_len);
+    }
+    else
+    {
+        p->len = (UINT16)(HCIC_PREAMBLE_SIZE + 1);
+        UINT8_TO_STREAM (pp, 1);
+
+        UINT8_TO_STREAM (pp, filt_type);
+    }
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_flush (UINT8 local_controller_id, UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_FLUSH);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_pin_type (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PIN_TYPE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_pin_type (UINT8 type)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PIN_TYPE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, type);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_new_unit_key (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_NEW_UNIT_KEY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_NEW_UNIT_KEY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CREATE_NEW_UNIT_KEY);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_NEW_UNIT_KEY);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_stored_key (BD_ADDR bd_addr, BOOLEAN read_all_flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_STORED_KEY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_STORED_KEY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_STORED_LINK_KEY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_STORED_KEY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, read_all_flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_stored_key (UINT8 num_keys, BD_ADDR *bd_addr,
+                                     LINK_KEY *link_key)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+    int j;
+
+    if ((p = HCI_GET_CMD_BUF(1 + (num_keys * (BD_ADDR_LEN + LINK_KEY_LEN)))) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+
+    p->len    = HCIC_PREAMBLE_SIZE + 1 + (num_keys * (BD_ADDR_LEN + LINK_KEY_LEN));
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_STORED_LINK_KEY);
+    UINT8_TO_STREAM  (pp, p->len - HCIC_PREAMBLE_SIZE);
+
+    if(num_keys > HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD)
+        num_keys = HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD;
+
+    UINT8_TO_STREAM (pp, num_keys);
+
+    for (j = 0; j < num_keys; j++)
+    {
+        BDADDR_TO_STREAM  (pp, bd_addr[j]);
+        ARRAY16_TO_STREAM (pp, link_key[j]);
+    }
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_DELETE_STORED_KEY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_DELETE_STORED_KEY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_DELETE_STORED_LINK_KEY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_DELETE_STORED_KEY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, delete_all_flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_change_name (BD_NAME name)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+    UINT16 len = strlen ((char *)name) + 1;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CHANGE_NAME)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CHANGE_NAME;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_CHANGE_LOCAL_NAME);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CHANGE_NAME);
+
+    ARRAY_TO_STREAM (pp, name, len);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_name (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_NAME);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_conn_acc_tout (UINT8 local_controller_id)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_CONN_ACCEPT_TOUT);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_conn_acc_tout (UINT8 local_controller_id, UINT16 timeout)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM2)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM2;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_CONN_ACCEPT_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM2);
+
+    UINT16_TO_STREAM (pp, timeout);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_page_tout (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PAGE_TOUT);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_page_tout (UINT16 timeout)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM2)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM2;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PAGE_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM2);
+
+    UINT16_TO_STREAM  (pp, timeout);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_scan_enable (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_SCAN_ENABLE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_scan_enable (UINT8 flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_SCAN_ENABLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_pagescan_cfg(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PAGESCAN_CFG);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval, UINT16 window)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PAGESCAN_CFG);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG);
+
+    UINT16_TO_STREAM (pp, interval);
+    UINT16_TO_STREAM (pp, window);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_inqscan_cfg(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_INQUIRYSCAN_CFG);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_INQUIRYSCAN_CFG);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG);
+
+    UINT16_TO_STREAM (pp, interval);
+    UINT16_TO_STREAM (pp, window);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_auth_enable (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_AUTHENTICATION_ENABLE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_auth_enable (UINT8 flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_AUTHENTICATION_ENABLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_encr_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_ENCRYPTION_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_encr_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_ENCRYPTION_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_dev_class(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_CLASS_OF_DEVICE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev_class)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM3)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM3;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_CLASS_OF_DEVICE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM3);
+
+    DEVCLASS_TO_STREAM (pp, dev_class);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_voice_settings(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_VOICE_SETTINGS);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM2)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM2;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_VOICE_SETTINGS);
+    UINT8_TO_STREAM (pp, HCIC_PARAM_SIZE_WRITE_PARAM2);
+
+    UINT16_TO_STREAM (pp, flags);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_auto_flush_tout (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_AUTO_FLUSH_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_auto_flush_tout (UINT16 handle, UINT16 tout)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_AUTO_FLUSH_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, tout);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_num_bcast_xmit (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_NUM_BCAST_REXMITS);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_num_bcast_xmit (UINT8 num)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_NUM_BCAST_REXMITS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, num);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_hold_mode_act (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_HOLD_MODE_ACTIVITY);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_hold_mode_act (UINT8 flags)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_HOLD_MODE_ACTIVITY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, flags);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_tx_power (UINT16 handle, UINT8 type)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_TX_POWER)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_TX_POWER;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_TRANSMIT_POWER_LEVEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_TX_POWER);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, type);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_sco_flow_enable (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_SCO_FLOW_CTRL_ENABLE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_sco_flow_enable (UINT8 flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_SCO_FLOW_CTRL_ENABLE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_host_flow_ctrl (UINT8 value)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_HC_TO_HOST_FLOW_CTRL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, value);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_host_buf_size (UINT16 acl_len, UINT8 sco_len,
+                                      UINT16 acl_num, UINT16 sco_num)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_HOST_BUFFER_SIZE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE);
+
+    UINT16_TO_STREAM (pp, acl_len);
+    UINT8_TO_STREAM  (pp, sco_len);
+    UINT16_TO_STREAM (pp, acl_num);
+    UINT16_TO_STREAM (pp, sco_num);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles, UINT16 *handle,
+                                          UINT16 *num_pkts)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+    int j;
+
+    if ((p = HCI_GET_CMD_BUF(1 + (num_handles * 4))) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + 1 + (num_handles * 4);
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_HOST_NUM_PACKETS_DONE);
+    UINT8_TO_STREAM  (pp, p->len - HCIC_PREAMBLE_SIZE);
+
+    UINT8_TO_STREAM (pp, num_handles);
+
+    for (j = 0; j < num_handles; j++)
+    {
+        UINT16_TO_STREAM (pp, handle[j]);
+        UINT16_TO_STREAM (pp, num_pkts[j]);
+    }
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_link_super_tout (UINT8 local_controller_id, UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LINK_SUPER_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_link_super_tout (UINT8 local_controller_id, UINT16 handle, UINT16 timeout)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_LINK_SUPER_TOUT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT16_TO_STREAM (pp, timeout);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_max_iac (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_NUM_SUPPORTED_IAC);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_cur_iac_lap (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_CURRENT_IAC_LAP);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac, LAP * const iac_lap)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+    int i;
+
+    if ((p = HCI_GET_CMD_BUF(1 + (LAP_LEN * num_cur_iac))) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + 1 + (LAP_LEN * num_cur_iac);
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_CURRENT_IAC_LAP);
+    UINT8_TO_STREAM  (pp, p->len - HCIC_PREAMBLE_SIZE);
+
+    UINT8_TO_STREAM (pp, num_cur_iac);
+
+    for (i = 0; i < num_cur_iac; i++)
+        LAP_TO_STREAM (pp, iac_lap[i]);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_page_scan_per (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PAGESCAN_PERIOD_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_page_scan_per (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PAGESCAN_PERIOD_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_page_scan_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PAGESCAN_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_page_scan_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PAGESCAN_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+/******************************************
+**    Lisbon Features
+*******************************************/
+#if BTM_SSR_INCLUDED == TRUE
+
+BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat,
+                                  UINT16 min_remote_lat, UINT16 min_local_lat)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SNIFF_SUB_RATE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SNIFF_SUB_RATE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SNIFF_SUB_RATE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SNIFF_SUB_RATE);
+
+    UINT16_TO_STREAM  (pp, handle);
+    UINT16_TO_STREAM  (pp, max_lat);
+    UINT16_TO_STREAM  (pp, min_remote_lat);
+    UINT16_TO_STREAM  (pp, min_local_lat);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+#endif /* BTM_SSR_INCLUDED */
+
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+/**** Extended Inquiry Response Commands ****/
+BOOLEAN btsnd_hcic_read_ext_inquiry_response (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_EXT_INQ_RESPONSE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+void btsnd_hcic_write_ext_inquiry_response (void *buffer, UINT8 fec_req)
+{
+    BT_HDR *p = (BT_HDR *)buffer;
+    UINT8 *pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_EXT_INQ_RESP;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_EXT_INQ_RESPONSE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_EXT_INQ_RESP);
+
+    UINT8_TO_STREAM (pp, fec_req);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+}
+#endif  /* BTM_EIR_SERVER_INCLUDED == TRUE */
+
+/**** Simple Pairing Commands ****/
+BOOLEAN btsnd_hcic_write_simple_pairing_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_W_SIMP_PAIR)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_W_SIMP_PAIR;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_SIMPLE_PAIRING_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_W_SIMP_PAIR);
+
+    UINT8_TO_STREAM (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_simple_pairing_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_R_SIMP_PAIR)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_R_SIMP_PAIR;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_SIMPLE_PAIRING_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_R_SIMP_PAIR);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_simp_pair_debug_mode(UINT8 debug_mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SIMP_PAIR_DBUG)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SIMP_PAIR_DBUG;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_SIMP_PAIR_DEBUG_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SIMP_PAIR_DBUG);
+
+    UINT8_TO_STREAM (pp, debug_mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability,
+                                UINT8 oob_present, UINT8 auth_req)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_IO_CAP_RESP)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_IO_CAP_RESP;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_IO_CAPABILITY_RESPONSE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_IO_CAP_RESP);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, capability);
+    UINT8_TO_STREAM  (pp, oob_present);
+    UINT8_TO_STREAM  (pp, auth_req);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_IO_CAP_REQ_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM  (pp, err_code);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_local_oob_data (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_R_LOCAL_OOB)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_R_LOCAL_OOB;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_OOB_DATA);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_R_LOCAL_OOB);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_UCONF_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_UCONF_REPLY;
+    p->offset = 0;
+
+    if (!is_yes)
+    {
+        /* Negative reply */
+        UINT16_TO_STREAM (pp, HCI_USER_CONF_VALUE_NEG_REPLY);
+    }
+    else
+    {
+        /* Confirmation */
+        UINT16_TO_STREAM (pp, HCI_USER_CONF_REQUEST_REPLY);
+    }
+
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_UCONF_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_U_PKEY_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_U_PKEY_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_USER_PASSKEY_REQ_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_U_PKEY_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT32_TO_STREAM (pp, value);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_USER_PASSKEY_REQ_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c, UINT8 *p_r)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_REM_OOB_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_REM_OOB_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_REM_OOB_DATA_REQ_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_REM_OOB_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    ARRAY16_TO_STREAM (pp, p_c);
+    ARRAY16_TO_STREAM (pp, p_r);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_REM_OOB_DATA_REQ_NEG_REPLY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+
+BOOLEAN btsnd_hcic_read_inq_tx_power (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_R_TX_POWER)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_R_TX_POWER;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_INQ_TX_POWER_LEVEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_R_TX_POWER);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_inq_tx_power (INT8 level)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_W_TX_POWER)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_W_TX_POWER;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_INQ_TX_POWER_LEVEL);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_W_TX_POWER);
+
+    INT8_TO_STREAM (pp, level);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+#if 0 /* currently not been used */
+BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_R_ERR_DATA_RPT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_R_ERR_DATA_RPT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_ERRONEOUS_DATA_RPT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_R_ERR_DATA_RPT);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+#endif
+
+BOOLEAN btsnd_hcic_write_default_erroneous_data_rpt (UINT8 flag)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_W_ERR_DATA_RPT)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_W_ERR_DATA_RPT;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_ERRONEOUS_DATA_RPT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_W_ERR_DATA_RPT);
+
+    UINT8_TO_STREAM (pp, flag);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SEND_KEYPRESS_NOTIF);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF);
+
+    BDADDR_TO_STREAM (pp, bd_addr);
+    UINT8_TO_STREAM (pp, notif);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+/**** end of Simple Pairing Commands ****/
+
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_ENHANCED_FLUSH)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_ENHANCED_FLUSH;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_ENHANCED_FLUSH);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_ENHANCED_FLUSH);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, packet_type);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+#endif
+
+
+BOOLEAN btsnd_hcic_refresh_encryption_key (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+    UINT16_TO_STREAM (pp, HCI_REFRESH_ENCRYPTION_KEY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+/*************************
+** End of Lisbon Commands
+**************************/
+
+BOOLEAN btsnd_hcic_read_local_ver (UINT8 local_controller_id)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_VERSION_INFO);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_local_supported_cmds (UINT8 local_controller_id)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_SUPPORTED_CMDS);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_local_features (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_FEATURES);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_local_ext_features (UINT8 page_num)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOCAL_EXT_FEATURES);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES);
+
+    UINT8_TO_STREAM (pp, page_num);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_buffer_size (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_BUFFER_SIZE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_country_code (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_COUNTRY_CODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_bd_addr (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_BD_ADDR);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_fail_contact_count (UINT8 local_controller_id, UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_FAILED_CONTACT_COUNT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_reset_fail_contact_count (UINT8 local_controller_id, UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_RESET_FAILED_CONTACT_COUNT);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (local_controller_id,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_GET_LINK_QUALITY);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_rssi (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_RSSI);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_loopback_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_LOOPBACK_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_loopback_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_LOOPBACK_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_enable_test_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_ENABLE_DEV_UNDER_TEST_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_afh_channel_assessment_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_AFH_ASSESSMENT_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_afh_channel_assessment_mode(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_AFH_ASSESSMENT_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_afh_channels (UINT8 first, UINT8 last)
+{
+    BT_HDR *p;
+    UINT8  *pp;
+    UINT8  channels[10] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F};
+    int    i;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_AFH_CHANNELS)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_AFH_CHANNELS;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_AFH_CHANNELS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_AFH_CHANNELS);
+
+    /* Just make sure that caller did not exceed 79 Bluetooth channels */
+    if ((first <= last) && (last <= 78))
+    {
+        for (i = first; i <= last; i++)
+        {
+            int byte_offset = i / 8;
+            int bit_offset  = i % 8;
+            channels[byte_offset] &= ~(1 << bit_offset);
+        }
+    }
+    for (i = 0; i < 10; i++)
+        *pp++ = channels[i];
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_set_afh_host_channel_class (UINT8 *p_afhchannelmap)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+    int    i;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_SET_AFH_CHANNELS)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_SET_AFH_CHANNELS;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_SET_AFH_CHANNELS);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_SET_AFH_CHANNELS);
+
+    /* Copy and convert */
+    for (i = 0; i < 10; i++)
+        *pp++ = p_afhchannelmap[9-i];
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_afh_channel_map (UINT16 handle)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_CMD_HANDLE)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_CMD_HANDLE;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_AFH_CH_MAP);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_CMD_HANDLE);
+
+    UINT16_TO_STREAM (pp, handle);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_clock (UINT16 handle, UINT8 which_clock)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CLOCK)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CLOCK;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_CLOCK);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_READ_CLOCK);
+
+    UINT16_TO_STREAM (pp, handle);
+    UINT8_TO_STREAM  (pp, which_clock);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_inqscan_type(void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_INQSCAN_TYPE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_inqscan_type (UINT8 type)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_INQSCAN_TYPE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, type);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_inquiry_mode (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_INQUIRY_MODE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_inquiry_mode (UINT8 mode)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_INQUIRY_MODE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, mode);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_read_pagescan_type (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_READ_PAGESCAN_TYPE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+BOOLEAN btsnd_hcic_write_pagescan_type (UINT8 type)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_WRITE_PARAM1)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_WRITE_PARAM1;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_WRITE_PAGESCAN_TYPE);
+    UINT8_TO_STREAM  (pp, HCIC_PARAM_SIZE_WRITE_PARAM1);
+
+    UINT8_TO_STREAM  (pp, type);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
+/* Must have room to store BT_HDR + max VSC length + callback pointer */
+#if !defined (LMP_TEST) && (HCI_CMD_POOL_BUF_SIZE < 268)
+#error "HCI_CMD_POOL_BUF_SIZE must be larger than 268"
+#endif
+
+void btsnd_hcic_vendor_spec_cmd (void *buffer, UINT16 opcode, UINT8 len,
+                                 UINT8 *p_data, void *p_cmd_cplt_cback)
+{
+    BT_HDR *p = (BT_HDR *)buffer;
+    UINT8 *pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + len;
+    p->offset = sizeof(void *);
+
+    *((void **)pp) = p_cmd_cplt_cback;  /* Store command complete callback in buffer */
+    pp += sizeof(void *);               /* Skip over callback pointer */
+
+    UINT16_TO_STREAM (pp, HCI_GRP_VENDOR_SPECIFIC | opcode);
+    UINT8_TO_STREAM  (pp, len);
+    ARRAY_TO_STREAM  (pp, p_data, len);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+}
+
+void btsnd_hcic_data (BT_HDR *p_buf, UINT16 len, UINT16 handle, UINT8 boundary, UINT8 broadcast)
+{
+    UINT8   *p;
+
+    /* Higher layer should have left 4 bytes for us to fill the header */
+    p_buf->offset -= 4;
+    p_buf->len    += 4;
+
+    /* Find the pointer to the beginning of the data */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    UINT16_TO_STREAM (p, handle | ((boundary & 3) << 12) | ((broadcast & 3) << 14));
+    UINT16_TO_STREAM (p, len);
+
+    HCI_ACL_DATA_TO_LOWER (p_buf);
+}
+
+BOOLEAN btsnd_hcic_nop (void)
+{
+    BT_HDR *p;
+    UINT8 *pp;
+
+    if ((p = HCI_GET_CMD_BUF(HCIC_PARAM_SIZE_READ_CMD)) == NULL)
+        return (FALSE);
+
+    pp = (UINT8 *)(p + 1);
+
+    p->len    = HCIC_PREAMBLE_SIZE + HCIC_PARAM_SIZE_READ_CMD;
+    p->offset = 0;
+
+    UINT16_TO_STREAM (pp, HCI_COMMAND_NONE);
+    UINT8_TO_STREAM  (pp,  HCIC_PARAM_SIZE_READ_CMD);
+
+    btu_hcif_send_cmd (LOCAL_BR_EDR_CONTROLLER_ID,  p);
+    return (TRUE);
+}
+
diff --git a/stack/hid/hid_conn.h b/stack/hid/hid_conn.h
new file mode 100644
index 0000000..79bb496
--- /dev/null
+++ b/stack/hid/hid_conn.h
@@ -0,0 +1,69 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains HID connection internal definitions
+ *
+ ******************************************************************************/
+
+#ifndef HID_CONN_H
+#define HID_CONN_H
+
+
+/* Define the HID Connection Block
+*/
+typedef struct hid_conn
+{
+#define HID_CONN_STATE_UNUSED           (0)
+#define HID_CONN_STATE_CONNECTING_CTRL  (1)
+#define HID_CONN_STATE_CONNECTING_INTR  (2)
+#define HID_CONN_STATE_CONFIG           (3)
+#define HID_CONN_STATE_CONNECTED        (4)
+#define HID_CONN_STATE_DISCONNECTING    (5)
+#define HID_CONN_STATE_SECURITY         (6)
+
+    UINT8             conn_state;
+
+#define HID_CONN_FLAGS_IS_ORIG              (0x01)
+#define HID_CONN_FLAGS_HIS_CTRL_CFG_DONE    (0x02)
+#define HID_CONN_FLAGS_MY_CTRL_CFG_DONE     (0x04)
+#define HID_CONN_FLAGS_HIS_INTR_CFG_DONE    (0x08)
+#define HID_CONN_FLAGS_MY_INTR_CFG_DONE     (0x10)
+#define HID_CONN_FLAGS_ALL_CONFIGURED       (0x1E)        /* All the config done */
+#define HID_CONN_FLAGS_CONGESTED            (0x20)
+#define HID_CONN_FLAGS_INACTIVE             (0x40)
+
+    UINT8             conn_flags;
+
+    UINT8             ctrl_id;
+    UINT16            ctrl_cid;
+    UINT16            intr_cid;
+    UINT16            rem_mtu_size;
+    UINT16            disc_reason;                       /* Reason for disconnecting (for HID_HDEV_EVT_CLOSE) */
+    TIMER_LIST_ENT    timer_entry;
+
+} tHID_CONN;
+
+#define HID_SEC_CHN   1
+#define HID_NOSEC_CHN 2
+
+#define HIDD_SEC_CHN    3
+#define HIDD_NOSEC_CHN  4
+
+#endif
diff --git a/stack/hid/hidh_api.c b/stack/hid/hidh_api.c
new file mode 100644
index 0000000..36ee5ea
--- /dev/null
+++ b/stack/hid/hidh_api.c
@@ -0,0 +1,546 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the HID HOST API entry points
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hiddefs.h"
+#include "hidh_api.h"
+#include "hidh_int.h"
+#include "btm_api.h"
+#include "btu.h"
+
+#if HID_DYNAMIC_MEMORY == FALSE
+tHID_HOST_CTB   hh_cb;
+#endif
+
+static void hidh_search_callback (UINT16 sdp_result);
+
+/*******************************************************************************
+**
+** Function         HID_HostGetSDPRecord
+**
+** Description      This function reads the device SDP record
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS HID_HostGetSDPRecord ( BD_ADDR addr, tSDP_DISCOVERY_DB *p_db, UINT32 db_len,
+                                   tHID_HOST_SDP_CALLBACK *sdp_cback )
+{
+    tSDP_UUID   uuid_list;
+
+    if( hh_cb.sdp_busy )
+        return HID_ERR_SDP_BUSY;
+
+    uuid_list.len = 2;
+    uuid_list.uu.uuid16 = UUID_SERVCLASS_HUMAN_INTERFACE;
+
+    hh_cb.p_sdp_db = p_db;
+    SDP_InitDiscoveryDb (p_db, db_len, 1, &uuid_list, 0, NULL);
+
+    if (SDP_ServiceSearchRequest (addr, p_db, hidh_search_callback))
+    {
+        hh_cb.sdp_cback = sdp_cback ;
+        hh_cb.sdp_busy = TRUE;
+        return HID_SUCCESS;
+    }
+    else
+        return HID_ERR_NO_RESOURCES;
+}
+
+void hidh_get_str_attr( tSDP_DISC_REC *p_rec, UINT16 attr_id, UINT16 max_len, char *str )
+{
+    tSDP_DISC_ATTR          *p_attr;
+    UINT16                  name_len;
+
+    if ((p_attr = SDP_FindAttributeInRec(p_rec, attr_id)) != NULL)
+    {
+        if((name_len = SDP_DISC_ATTR_LEN(p_attr->attr_len_type)) < max_len )
+        {
+            memcpy( str, (char *) p_attr->attr_value.v.array, name_len );
+            str[name_len] = '\0';
+        }
+        else
+        {
+            memcpy( str, (char *) p_attr->attr_value.v.array, max_len-1 );
+            str[max_len] = '\0';
+        }
+    }
+    else
+        str[0] = '\0';
+}
+
+
+static void hidh_search_callback (UINT16 sdp_result)
+{
+    tSDP_DISCOVERY_DB       *p_db = hh_cb.p_sdp_db;
+    tSDP_DISC_REC           *p_rec;
+    tSDP_DISC_ATTR          *p_attr, *p_subattr1, *p_subattr2, *p_repdesc;
+    tBT_UUID                hid_uuid;
+    tHID_DEV_SDP_INFO       *p_nvi = &hh_cb.sdp_rec;
+    UINT16                  attr_mask = 0;
+
+    hid_uuid.len       = LEN_UUID_16;
+    hid_uuid.uu.uuid16 = UUID_SERVCLASS_HUMAN_INTERFACE;
+
+    hh_cb.sdp_busy = FALSE;
+
+    if (sdp_result != SDP_SUCCESS)
+    {
+        hh_cb.sdp_cback(sdp_result, 0, NULL);
+        return;
+    }
+
+    if ((p_rec = SDP_FindServiceUUIDInDb (p_db, &hid_uuid, NULL)) == NULL)
+    {
+        hh_cb.sdp_cback(HID_SDP_NO_SERV_UUID, 0, NULL);
+        return;
+    }
+
+    memset (&hh_cb.sdp_rec, 0, sizeof( tHID_DEV_SDP_INFO ));
+
+    /* First, verify the mandatory fields we care about */
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_DESCRIPTOR_LIST)) == NULL)
+     || (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) != DATA_ELE_SEQ_DESC_TYPE)
+     || ((p_subattr1 = p_attr->attr_value.v.p_sub_attr) == NULL)
+     || (SDP_DISC_ATTR_TYPE(p_subattr1->attr_len_type) != DATA_ELE_SEQ_DESC_TYPE)
+     || ((p_subattr2 = p_subattr1->attr_value.v.p_sub_attr) == NULL)
+     || ((p_repdesc = p_subattr2->p_next_attr) == NULL)
+     || (SDP_DISC_ATTR_TYPE(p_repdesc->attr_len_type) != TEXT_STR_DESC_TYPE))
+    {
+        hh_cb.sdp_cback(HID_SDP_MANDATORY_MISSING, 0, NULL);
+        return;
+    }
+
+    if ((p_nvi->dscp_info.dl_len = SDP_DISC_ATTR_LEN(p_repdesc->attr_len_type)) != 0)
+        p_nvi->dscp_info.dsc_list = (UINT8 *) &p_repdesc->attr_value;
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_VIRTUAL_CABLE)) != NULL) &&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_VIRTUAL_CABLE;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_RECONNECT_INITIATE)) != NULL) &&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_RECONN_INIT;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_NORMALLY_CONNECTABLE)) != NULL) &&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_NORMALLY_CONNECTABLE;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_SDP_DISABLE)) != NULL)&&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_SDP_DISABLE;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_BATTERY_POWER)) != NULL)&&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_BATTERY_POWER;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_REMOTE_WAKE)) != NULL)&&
+        (p_attr->attr_value.v.u8) )
+    {
+        attr_mask |= HID_REMOTE_WAKE;
+    }
+
+    hidh_get_str_attr( p_rec, ATTR_ID_SERVICE_NAME, HID_MAX_SVC_NAME_LEN, p_nvi->svc_name );
+    hidh_get_str_attr( p_rec, ATTR_ID_SERVICE_DESCRIPTION, HID_MAX_SVC_DESCR_LEN, p_nvi->svc_descr );
+    hidh_get_str_attr( p_rec, ATTR_ID_PROVIDER_NAME, HID_MAX_PROV_NAME_LEN, p_nvi->prov_name );
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_DEVICE_RELNUM)) != NULL))
+    {
+        p_nvi->rel_num = p_attr->attr_value.v.u16;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_COUNTRY_CODE)) != NULL))
+    {
+        p_nvi->ctry_code = p_attr->attr_value.v.u8;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_DEVICE_SUBCLASS)) != NULL))
+    {
+        p_nvi->sub_class = p_attr->attr_value.v.u8;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_PARSER_VERSION)) != NULL))
+    {
+        p_nvi->hpars_ver = p_attr->attr_value.v.u16;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_LINK_SUPERVISION_TO)) != NULL))
+    {
+        attr_mask |= HID_SUP_TOUT_AVLBL;
+        p_nvi->sup_timeout = p_attr->attr_value.v.u16;
+    }
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_SSR_HOST_MAX_LAT)) != NULL))
+    {
+        attr_mask |= HID_SSR_MAX_LATENCY;
+        p_nvi->ssr_max_latency = p_attr->attr_value.v.u16;
+    }
+    else
+        p_nvi->ssr_max_latency = HID_SSR_PARAM_INVALID;
+
+    if (((p_attr = SDP_FindAttributeInRec (p_rec, ATTR_ID_HID_SSR_HOST_MIN_TOUT)) != NULL))
+    {
+        attr_mask |= HID_SSR_MIN_TOUT;
+        p_nvi->ssr_min_tout = p_attr->attr_value.v.u16;
+    }
+    else
+        p_nvi->ssr_max_latency = HID_SSR_PARAM_INVALID;
+
+    hh_cb.sdp_rec.p_sdp_layer_rec = p_rec;
+    hh_cb.sdp_cback(SDP_SUCCESS, attr_mask, &hh_cb.sdp_rec);
+}
+
+
+/*******************************************************************************
+**
+** Function         HID_HostInit
+**
+** Description      This function initializes the control block and trace variable
+**
+** Returns          void
+**
+*******************************************************************************/
+void HID_HostInit (void)
+{
+    memset(&hh_cb, 0, sizeof(tHID_HOST_CTB));
+
+#if defined(HID_INITIAL_TRACE_LEVEL)
+    hh_cb.trace_level = HID_INITIAL_TRACE_LEVEL;
+#else
+    hh_cb.trace_level = BT_TRACE_LEVEL_NONE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostSetTraceLevel
+**
+** Description      This function sets the trace level for HID Host. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 HID_HostSetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        hh_cb.trace_level = new_level;
+
+    return (hh_cb.trace_level);
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostRegister
+**
+** Description      This function registers HID-Host with lower layers
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS HID_HostRegister (tHID_HOST_DEV_CALLBACK *dev_cback)
+{
+    tHID_STATUS st;
+
+    if( hh_cb.reg_flag )
+        return HID_ERR_ALREADY_REGISTERED;
+
+    if( dev_cback == NULL )
+        return HID_ERR_INVALID_PARAM;
+
+    /* Register with L2CAP */
+    if( (st = hidh_conn_reg()) != HID_SUCCESS )
+    {
+        return st;
+    }
+
+    hh_cb.callback = dev_cback ;
+    hh_cb.reg_flag = TRUE;
+
+    return (HID_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostDeregister
+**
+** Description      This function is called when the host is about power down.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS HID_HostDeregister(void)
+{
+    UINT8 i;
+
+    if( !hh_cb.reg_flag )
+        return (HID_ERR_NOT_REGISTERED);
+
+    for( i=0; i<HID_HOST_MAX_DEVICES; i++ )
+    {
+        HID_HostRemoveDev( i ) ;
+    }
+
+    hidh_conn_dereg();
+    hh_cb.reg_flag = FALSE;
+
+    return (HID_SUCCESS) ;
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostAddDev
+**
+** Description      This is called so HID-host may manage this device.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS HID_HostAddDev ( BD_ADDR addr, UINT16 attr_mask, UINT8 *handle )
+{
+    int i;
+    /* Find an entry for this device in hh_cb.devices array */
+
+    if( !hh_cb.reg_flag )
+        return (HID_ERR_NOT_REGISTERED);
+
+    for( i=0; i<HID_HOST_MAX_DEVICES; i++)
+    {
+        if((hh_cb.devices[i].in_use) &&
+           (!memcmp(addr, hh_cb.devices[i].addr, BD_ADDR_LEN)))
+            break;
+    }
+
+    if (i== HID_HOST_MAX_DEVICES )
+    {
+        for( i=0; i<HID_HOST_MAX_DEVICES; i++)
+        {
+            if( !hh_cb.devices[i].in_use)
+                break;
+        }
+    }
+
+    if( i==HID_HOST_MAX_DEVICES )
+        return HID_ERR_NO_RESOURCES;
+
+    if (!hh_cb.devices[i].in_use)
+    {
+        hh_cb.devices[i].in_use = TRUE;
+        memcpy( hh_cb.devices[i].addr, addr, sizeof( BD_ADDR ) ) ;
+        hh_cb.devices[i].state = HID_DEV_NO_CONN;
+        hh_cb.devices[i].conn_tries = 0 ;
+    }
+
+    hh_cb.devices[i].attr_mask = attr_mask;
+
+    *handle = i;
+
+    return (HID_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         HID_HostRemoveDev
+**
+** Description      This removes the device from list devices that host has to manage.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS HID_HostRemoveDev ( UINT8 dev_handle )
+{
+    if( !hh_cb.reg_flag )
+        return (HID_ERR_NOT_REGISTERED);
+
+    if( (dev_handle >= HID_HOST_MAX_DEVICES) || (!hh_cb.devices[dev_handle].in_use) )
+        return HID_ERR_INVALID_PARAM;
+
+    HID_HostCloseDev( dev_handle ) ;
+    hh_cb.devices[dev_handle].in_use = FALSE;
+    hh_cb.devices[dev_handle].conn.conn_state = HID_CONN_STATE_UNUSED;
+    hh_cb.devices[dev_handle].conn.ctrl_cid = hh_cb.devices[dev_handle].conn.intr_cid = 0;
+
+    return HID_SUCCESS;
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostOpenDev
+**
+** Description      This function is called when the user wants to initiate a
+**                  connection attempt to a device.
+**
+** Returns          void
+**
+*******************************************************************************/
+tHID_STATUS HID_HostOpenDev ( UINT8 dev_handle )
+{
+    if( !hh_cb.reg_flag )
+        return (HID_ERR_NOT_REGISTERED);
+
+    if( (dev_handle >= HID_HOST_MAX_DEVICES) || (!hh_cb.devices[dev_handle].in_use) )
+        return HID_ERR_INVALID_PARAM;
+
+    if( hh_cb.devices[dev_handle].state != HID_DEV_NO_CONN )
+        return HID_ERR_ALREADY_CONN;
+
+    hh_cb.devices[dev_handle].conn_tries = 1;
+    return hidh_conn_initiate( dev_handle );
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostWriteDev
+**
+** Description      This function is called when the host has a report to send.
+**
+**                  report_id: is only used on GET_REPORT transaction if is specified.
+**                              only valid when it's a non-zero value.
+**
+** Returns          void
+**
+*******************************************************************************/
+tHID_STATUS HID_HostWriteDev( UINT8 dev_handle, UINT8 t_type,
+                              UINT8 param, UINT16 data, UINT8 report_id, BT_HDR *pbuf  )
+{
+    tHID_STATUS status = HID_SUCCESS;
+
+    if( !hh_cb.reg_flag )
+    {
+        HIDH_TRACE_ERROR0("HID_ERR_NOT_REGISTERED");
+        status = HID_ERR_NOT_REGISTERED;
+    }
+
+    if( (dev_handle >= HID_HOST_MAX_DEVICES) || (!hh_cb.devices[dev_handle].in_use) )
+    {
+        HIDH_TRACE_ERROR0("HID_ERR_INVALID_PARAM");
+        status = HID_ERR_INVALID_PARAM;
+    }
+
+    if( hh_cb.devices[dev_handle].state != HID_DEV_CONNECTED )
+    {
+        HIDH_TRACE_ERROR1("HID_ERR_NO_CONNECTION dev_handle %d", dev_handle);
+        status = HID_ERR_NO_CONNECTION;
+    }
+
+    if (status != HID_SUCCESS)
+    {
+        if (pbuf)
+            GKI_freebuf ((void *)pbuf);
+    }
+    else
+        status = hidh_conn_snd_data( dev_handle, t_type, param, data, report_id, pbuf ) ;
+
+    return status;
+}
+
+/*******************************************************************************
+**
+** Function         HID_HostCloseDev
+**
+** Description      This function disconnects the device.
+**
+** Returns          void
+**
+*******************************************************************************/
+tHID_STATUS HID_HostCloseDev( UINT8 dev_handle )
+{
+    if( !hh_cb.reg_flag )
+        return (HID_ERR_NOT_REGISTERED);
+
+    if( (dev_handle >= HID_HOST_MAX_DEVICES) || (!hh_cb.devices[dev_handle].in_use) )
+        return HID_ERR_INVALID_PARAM;
+
+    hh_cb.devices[dev_handle].conn_tries = HID_HOST_MAX_CONN_RETRY+1;
+    btu_stop_timer( &(hh_cb.devices[dev_handle].conn.timer_entry) ) ;
+
+    if( hh_cb.devices[dev_handle].state != HID_DEV_CONNECTED )
+        return HID_ERR_NO_CONNECTION;
+
+    hh_cb.devices[dev_handle].conn_tries = HID_HOST_MAX_CONN_RETRY+1;
+    return hidh_conn_disconnect( dev_handle );
+}
+
+tHID_STATUS HID_HostSetSecurityLevel( char serv_name[], UINT8 sec_lvl )
+{
+    if (!BTM_SetSecurityLevel (FALSE, serv_name, BTM_SEC_SERVICE_HID_SEC_CTRL,
+                               sec_lvl, HID_PSM_CONTROL, BTM_SEC_PROTO_HID, HID_SEC_CHN))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 1 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    if (!BTM_SetSecurityLevel (TRUE, serv_name, BTM_SEC_SERVICE_HID_SEC_CTRL,
+                               sec_lvl, HID_PSM_CONTROL, BTM_SEC_PROTO_HID, HID_SEC_CHN))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 2 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    if (!BTM_SetSecurityLevel (FALSE, serv_name, BTM_SEC_SERVICE_HID_NOSEC_CTRL,
+                               BTM_SEC_NONE, HID_PSM_CONTROL, BTM_SEC_PROTO_HID, HID_NOSEC_CHN))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 3 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    if (!BTM_SetSecurityLevel (TRUE, serv_name, BTM_SEC_SERVICE_HID_NOSEC_CTRL,
+                               BTM_SEC_NONE, HID_PSM_CONTROL, BTM_SEC_PROTO_HID, HID_NOSEC_CHN))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 4 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    if (!BTM_SetSecurityLevel (TRUE, serv_name, BTM_SEC_SERVICE_HID_INTR,
+                               BTM_SEC_NONE, HID_PSM_INTERRUPT, BTM_SEC_PROTO_HID, 0))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 5 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    if (!BTM_SetSecurityLevel (FALSE, serv_name, BTM_SEC_SERVICE_HID_INTR,
+                               BTM_SEC_NONE, HID_PSM_INTERRUPT, BTM_SEC_PROTO_HID, 0))
+    {
+        HIDH_TRACE_ERROR0 ("Security Registration 6 failed");
+        return (HID_ERR_NO_RESOURCES);
+    }
+
+    return( HID_SUCCESS );
+}
diff --git a/stack/hid/hidh_conn.c b/stack/hid/hidh_conn.c
new file mode 100644
index 0000000..9ed3a0e
--- /dev/null
+++ b/stack/hid/hidh_conn.c
@@ -0,0 +1,1040 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the connection interface functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+
+#include "gki.h"
+#include "bt_types.h"
+
+#include "l2cdefs.h"
+#include "l2c_api.h"
+
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+#include "hiddefs.h"
+
+#include "hidh_api.h"
+#include "hidh_int.h"
+
+static UINT8 find_conn_by_cid (UINT16 cid);
+static void hidh_conn_retry (UINT8 dhandle);
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void hidh_l2cif_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid,
+                                    UINT16 psm, UINT8 l2cap_id);
+static void hidh_l2cif_connect_cfm (UINT16 l2cap_cid, UINT16 result);
+static void hidh_l2cif_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void hidh_l2cif_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void hidh_l2cif_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed);
+static void hidh_l2cif_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg);
+static void hidh_l2cif_disconnect_cfm (UINT16 l2cap_cid, UINT16 result);
+static void hidh_l2cif_cong_ind (UINT16 l2cap_cid, BOOLEAN congested);
+
+static const tL2CAP_APPL_INFO hst_reg_info =
+{
+    hidh_l2cif_connect_ind,
+    hidh_l2cif_connect_cfm,
+    NULL,
+    hidh_l2cif_config_ind,
+    hidh_l2cif_config_cfm,
+    hidh_l2cif_disconnect_ind,
+    hidh_l2cif_disconnect_cfm,
+    NULL,
+    hidh_l2cif_data_ind,
+    hidh_l2cif_cong_ind,
+    NULL                        /* tL2CA_TX_COMPLETE_CB */
+};
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_reg
+**
+** Description      This function initializes the SDP unit.
+**
+** Returns          void
+**
+*******************************************************************************/
+tHID_STATUS hidh_conn_reg (void)
+{
+    int xx;
+
+    /* Initialize the L2CAP configuration. We only care about MTU and flush */
+    memset(&hh_cb.l2cap_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+
+    hh_cb.l2cap_cfg.mtu_present          = TRUE;
+    hh_cb.l2cap_cfg.mtu                  = HID_HOST_MTU;
+    hh_cb.l2cap_cfg.flush_to_present     = TRUE;
+    hh_cb.l2cap_cfg.flush_to             = HID_HOST_FLUSH_TO;
+
+    /* Now, register with L2CAP */
+    if (!L2CA_Register (HID_PSM_CONTROL, (tL2CAP_APPL_INFO *) &hst_reg_info))
+    {
+        HIDH_TRACE_ERROR0 ("HID Control Registration failed");
+        return (HID_ERR_L2CAP_FAILED) ;
+    }
+    if (!L2CA_Register (HID_PSM_INTERRUPT, (tL2CAP_APPL_INFO *) &hst_reg_info))
+    {
+        L2CA_Deregister( HID_PSM_CONTROL ) ;
+        HIDH_TRACE_ERROR0 ("HID Interrupt Registration failed");
+        return (HID_ERR_L2CAP_FAILED) ;
+    }
+
+    for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++)
+    {
+        hh_cb.devices[xx].in_use = FALSE ;
+        hh_cb.devices[xx].conn.conn_state = HID_CONN_STATE_UNUSED;
+    }
+
+    return (HID_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         hidh_conn_disconnect
+**
+** Description      This function disconnects a connection.
+**
+** Returns          TRUE if disconnect started, FALSE if already disconnected
+**
+*******************************************************************************/
+tHID_STATUS hidh_conn_disconnect (UINT8 dhandle)
+{
+    tHID_CONN *p_hcon = &hh_cb.devices[dhandle].conn;
+
+    HIDH_TRACE_EVENT0 ("HID - disconnect");
+
+    if ((p_hcon->ctrl_cid != 0) || (p_hcon->intr_cid != 0))
+    {
+        p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING;
+
+        /* Disconnect both interrupt and control channels */
+        if (p_hcon->intr_cid)
+            L2CA_DisconnectReq (p_hcon->intr_cid);
+
+        if (p_hcon->ctrl_cid)
+            L2CA_DisconnectReq (p_hcon->ctrl_cid);
+    }
+    else
+    {
+        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
+    }
+
+    return (HID_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         hidh_sec_check_complete_term
+**
+** Description      HID security check complete callback function.
+**
+** Returns          Send L2CA_ConnectRsp OK if secutiry check succeed; otherwise
+**                  send security block L2C connection response.
+**
+*******************************************************************************/
+void hidh_sec_check_complete_term (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tHID_HOST_DEV_CTB *p_dev= (tHID_HOST_DEV_CTB *) p_ref_data;
+
+    if( res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY )
+    {
+        p_dev->conn.disc_reason = HID_SUCCESS;  /* Authentication passed. Reset disc_reason (from HID_ERR_AUTH_FAILED) */
+
+        p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_INTR;
+
+        /* Send response to the L2CAP layer. */
+        L2CA_ConnectRsp (p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid, L2CAP_CONN_OK, L2CAP_CONN_OK);
+
+        /* Send a Configuration Request. */
+        L2CA_ConfigReq (p_dev->conn.ctrl_cid, &hh_cb.l2cap_cfg);
+
+    }
+    /* security check fail */
+    else if (res != BTM_SUCCESS)
+    {
+        p_dev->conn.disc_reason = HID_ERR_AUTH_FAILED;      /* Save reason for disconnecting */
+        p_dev->conn.conn_state = HID_CONN_STATE_UNUSED;
+        L2CA_ConnectRsp (p_dev->addr, p_dev->conn.ctrl_id, p_dev->conn.ctrl_cid, L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_connect_ind
+**
+** Description      This function handles an inbound connection indication
+**                  from L2CAP. This is the case where we are acting as a
+**                  server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id)
+{
+    tHID_CONN    *p_hcon;
+    BOOLEAN      bAccept = TRUE;
+    int i;
+    tHID_HOST_DEV_CTB *p_dev;
+
+    HIDH_TRACE_EVENT2 ("HID - Rcvd L2CAP conn ind, PSM: 0x%04x  CID 0x%x", psm, l2cap_cid);
+
+    for( i=0; i < HID_HOST_MAX_DEVICES; i++ )
+    {
+        if( hh_cb.devices[i].in_use && (!memcmp(bd_addr, hh_cb.devices[i].addr, sizeof(BD_ADDR))) )
+            break;
+    }
+
+    if (i >= HID_HOST_MAX_DEVICES)
+    {
+        L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_SECURITY_BLOCK, 0);
+        return;
+    }
+
+    p_hcon = &hh_cb.devices[i].conn;
+    p_dev  = &hh_cb.devices[i];
+
+    /* Check we are in the correct state for this */
+    if (psm == HID_PSM_INTERRUPT)
+    {
+        if (p_hcon->ctrl_cid == 0)
+        {
+            HIDH_TRACE_WARNING0 ("HID - Rcvd INTR L2CAP conn ind, but no CTL channel");
+            bAccept = FALSE;
+        }
+        if (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR)
+        {
+            HIDH_TRACE_WARNING1 ("HID - Rcvd INTR L2CAP conn ind, wrong state: %d", p_hcon->conn_state);
+            bAccept = FALSE;
+        }
+    }
+    else /* CTRL channel */
+    {
+#if defined(HID_HOST_ACPT_NEW_CONN) && (HID_HOST_ACPT_NEW_CONN == TRUE)
+        p_hcon->ctrl_cid = p_hcon->intr_cid = 0;
+        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
+#else
+        if (p_hcon->conn_state != HID_CONN_STATE_UNUSED)
+        {
+            HIDH_TRACE_WARNING1 ("HID - Rcvd CTL L2CAP conn ind, wrong state: %d", p_hcon->conn_state);
+            bAccept = FALSE;
+        }
+#endif
+    }
+
+    if (!bAccept)
+    {
+        L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_NO_RESOURCES, 0);
+        return;
+    }
+
+    if (psm == HID_PSM_CONTROL)
+    {
+        p_hcon->conn_flags = 0;
+        p_hcon->ctrl_cid   = l2cap_cid;
+        p_hcon->ctrl_id    = l2cap_id;
+        p_hcon->disc_reason = HID_L2CAP_CONN_FAIL;  /* In case disconnection occurs before security is completed, then set CLOSE_EVT reason code to 'connection failure' */
+
+        p_hcon->conn_state = HID_CONN_STATE_SECURITY;
+        if(btm_sec_mx_access_request (p_dev->addr, HID_PSM_CONTROL,
+            FALSE, BTM_SEC_PROTO_HID,
+            (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN,
+            &hidh_sec_check_complete_term, p_dev) == BTM_CMD_STARTED)
+        {
+            L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_PENDING, L2CAP_CONN_OK);
+        }
+
+        return;
+    }
+
+    /* Transition to the next appropriate state, configuration */
+    p_hcon->conn_state = HID_CONN_STATE_CONFIG;
+    p_hcon->intr_cid   = l2cap_cid;
+
+    /* Send response to the L2CAP layer. */
+    L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK);
+
+    /* Send a Configuration Request. */
+    L2CA_ConfigReq (l2cap_cid, &hh_cb.l2cap_cfg);
+
+    HIDH_TRACE_EVENT2 ("HID - Rcvd L2CAP conn ind, sent config req, PSM: 0x%04x  CID 0x%x", psm, l2cap_cid);
+}
+
+/*******************************************************************************
+**
+** Function         hidh_proc_repage_timeout
+**
+** Description      This function handles timeout (to page device).
+**
+** Returns          void
+**
+*******************************************************************************/
+void hidh_proc_repage_timeout (TIMER_LIST_ENT *p_tle)
+{
+    hidh_conn_initiate( (UINT8) p_tle->param ) ;
+    hh_cb.devices[p_tle->param].conn_tries++;
+    hh_cb.callback( (UINT8) p_tle->param, HID_HDEV_EVT_RETRYING, hh_cb.devices[p_tle->param].conn_tries, NULL ) ;
+}
+
+/*******************************************************************************
+**
+** Function         hidh_sec_check_complete_orig
+**
+** Description      This function checks to see if security procedures are being
+**                  carried out or not..
+**
+** Returns          void
+**
+*******************************************************************************/
+void hidh_sec_check_complete_orig (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tHID_HOST_DEV_CTB *p_dev = (tHID_HOST_DEV_CTB *) p_ref_data;
+    UINT8 dhandle;
+#if (HID_HOST_MAX_CONN_RETRY > 0)
+    UINT32 cb_res = HID_ERR_AUTH_FAILED;
+#endif
+    UINT32 reason;
+
+    dhandle = p_dev - &(hh_cb.devices[0]) ;
+    if( res == BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY )
+    {
+        HIDH_TRACE_EVENT0 ("HID - Originator security pass.");
+        p_dev->conn.disc_reason = HID_SUCCESS;  /* Authentication passed. Reset disc_reason (from HID_ERR_AUTH_FAILED) */
+
+        /* Check if L2CAP started the connection process for interrupt channel */
+        if ((p_dev->conn.intr_cid = L2CA_ConnectReq (HID_PSM_INTERRUPT, hh_cb.devices[dhandle].addr)) == 0)
+        {
+            HIDH_TRACE_WARNING0 ("HID - INTR Originate failed");
+            reason = HID_L2CAP_REQ_FAIL ;
+            hidh_conn_disconnect (dhandle);
+            hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, reason, NULL ) ;
+            return;
+        }
+        else
+        {
+            /* Transition to the next appropriate state, waiting for connection confirm on control channel. */
+            p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_INTR;
+        }
+    }
+
+    if( res != BTM_SUCCESS && p_dev->conn.conn_state == HID_CONN_STATE_SECURITY )
+    {
+#if (HID_HOST_MAX_CONN_RETRY > 0)
+        if( res == BTM_DEVICE_TIMEOUT )
+        {
+            if( p_dev->conn_tries <= HID_HOST_MAX_CONN_RETRY )
+            {
+                hidh_conn_retry (dhandle);
+                return;
+            }
+            else
+                cb_res = HID_L2CAP_CONN_FAIL | HCI_ERR_PAGE_TIMEOUT ;
+        }
+#endif
+        p_dev->conn.disc_reason = HID_ERR_AUTH_FAILED;      /* Save reason for disconnecting */
+        hidh_conn_disconnect(dhandle);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_connect_cfm
+**
+** Description      This function handles the connect confirm events
+**                  from L2CAP. This is the case when we are acting as a
+**                  client and have sent a connect request.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_connect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+    UINT32  reason;
+    tHID_HOST_DEV_CTB *p_dev = NULL;
+
+    /* Find CCB based on CID, and verify we are in a state to accept this message */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+    {
+        p_dev = &hh_cb.devices[dhandle];
+        p_hcon = &hh_cb.devices[dhandle].conn;
+    }
+
+    if ((p_hcon == NULL)
+     || (!(p_hcon->conn_flags & HID_CONN_FLAGS_IS_ORIG))
+     || ((l2cap_cid == p_hcon->ctrl_cid) && (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_CTRL))
+     || ((l2cap_cid == p_hcon->intr_cid) && (p_hcon->conn_state != HID_CONN_STATE_CONNECTING_INTR)))
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd unexpected conn cnf, CID 0x%x ", l2cap_cid);
+        return;
+    }
+
+    if (result != L2CAP_CONN_OK)
+    {
+        if (l2cap_cid == p_hcon->ctrl_cid)
+            p_hcon->ctrl_cid = 0;
+        else
+            p_hcon->intr_cid = 0;
+
+        hidh_conn_disconnect(dhandle);
+
+#if (HID_HOST_MAX_CONN_RETRY > 0)
+        if( (hh_cb.devices[dhandle].conn_tries <= HID_HOST_MAX_CONN_RETRY) &&
+            (result == HCI_ERR_CONNECTION_TOUT || result == HCI_ERR_UNSPECIFIED ||
+             result == HCI_ERR_PAGE_TIMEOUT) )
+        {
+            hidh_conn_retry(dhandle);
+        }
+        else
+#endif
+        {
+            reason = HID_L2CAP_CONN_FAIL | (UINT32) result ;
+            hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, reason, NULL ) ;
+        }
+        return;
+    }
+    /* receive Control Channel connect confirmation */
+    if (l2cap_cid == p_hcon->ctrl_cid)
+    {
+        /* check security requirement */
+        p_hcon->conn_state = HID_CONN_STATE_SECURITY;
+        p_hcon->disc_reason = HID_L2CAP_CONN_FAIL;  /* In case disconnection occurs before security is completed, then set CLOSE_EVT reason code to "connection failure" */
+
+        btm_sec_mx_access_request (p_dev->addr, HID_PSM_CONTROL,
+            TRUE, BTM_SEC_PROTO_HID,
+            (p_dev->attr_mask & HID_SEC_REQUIRED) ? HID_SEC_CHN : HID_NOSEC_CHN,
+            &hidh_sec_check_complete_orig, p_dev);
+    }
+    else
+    {
+        p_hcon->conn_state = HID_CONN_STATE_CONFIG;
+    }
+
+    /* Send a Configuration Request. */
+    L2CA_ConfigReq (l2cap_cid, &hh_cb.l2cap_cfg);
+
+    HIDH_TRACE_EVENT1 ("HID - got CTRL conn cnf, sent cfg req, CID: 0x%x", l2cap_cid);
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_config_ind
+**
+** Description      This function processes the L2CAP configuration indication
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+    tHID_HOST_DEV_CTB *p_dev;
+
+    /* Find CCB based on CID */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+    {
+        p_dev = &hh_cb.devices[dhandle];
+        p_hcon = &hh_cb.devices[dhandle].conn;
+    }
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    HIDH_TRACE_EVENT1 ("HID - Rcvd cfg ind, sent cfg cfm, CID: 0x%x", l2cap_cid);
+
+    /* Remember the remote MTU size */
+    if ((!p_cfg->mtu_present) || (p_cfg->mtu > HID_HOST_MTU))
+        p_hcon->rem_mtu_size = HID_HOST_MTU;
+    else
+        p_hcon->rem_mtu_size = p_cfg->mtu;
+
+    /* For now, always accept configuration from the other side */
+    p_cfg->flush_to_present = FALSE;
+    p_cfg->mtu_present      = FALSE;
+    p_cfg->result           = L2CAP_CFG_OK;
+
+    L2CA_ConfigRsp (l2cap_cid, p_cfg);
+
+    if (l2cap_cid == p_hcon->ctrl_cid)
+        p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_CTRL_CFG_DONE;
+    else
+        p_hcon->conn_flags |= HID_CONN_FLAGS_HIS_INTR_CFG_DONE;
+
+    /* If all configuration is complete, change state and tell management we are up */
+    if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) == HID_CONN_FLAGS_ALL_CONFIGURED)
+     && (p_hcon->conn_state == HID_CONN_STATE_CONFIG))
+    {
+        p_hcon->conn_state = HID_CONN_STATE_CONNECTED;
+
+        hh_cb.devices[dhandle].state = HID_DEV_CONNECTED;
+        hh_cb.callback( dhandle, HID_HDEV_EVT_OPEN, 0, NULL ) ;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_config_cfm
+**
+** Description      This function processes the L2CAP configuration confirmation
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+    UINT32  reason;
+
+    HIDH_TRACE_EVENT2 ("HID - Rcvd cfg cfm, CID: 0x%x  Result: %d", l2cap_cid, p_cfg->result);
+
+    /* Find CCB based on CID */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+        p_hcon = &hh_cb.devices[dhandle].conn;
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* If configuration failed, disconnect the channel(s) */
+    if (p_cfg->result != L2CAP_CFG_OK)
+    {
+        hidh_conn_disconnect (dhandle);
+        reason = HID_L2CAP_CFG_FAIL | (UINT32) p_cfg->result ;
+        hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, reason, NULL ) ;
+        return;
+    }
+
+    if (l2cap_cid == p_hcon->ctrl_cid)
+        p_hcon->conn_flags |= HID_CONN_FLAGS_MY_CTRL_CFG_DONE;
+    else
+        p_hcon->conn_flags |= HID_CONN_FLAGS_MY_INTR_CFG_DONE;
+
+    /* If all configuration is complete, change state and tell management we are up */
+    if (((p_hcon->conn_flags & HID_CONN_FLAGS_ALL_CONFIGURED) == HID_CONN_FLAGS_ALL_CONFIGURED)
+     && (p_hcon->conn_state == HID_CONN_STATE_CONFIG))
+    {
+        p_hcon->conn_state = HID_CONN_STATE_CONNECTED;
+
+        hh_cb.devices[dhandle].state = HID_DEV_CONNECTED;
+        hh_cb.callback( dhandle, HID_HDEV_EVT_OPEN, 0, NULL ) ;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_disconnect_ind
+**
+** Description      This function handles a disconnect event from L2CAP. If
+**                  requested to, we ack the disconnect before dropping the CCB
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+    UINT16 disc_res = HCI_SUCCESS;
+    UINT16 hid_close_evt_reason;
+
+    /* Find CCB based on CID */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+        p_hcon = &hh_cb.devices[dhandle].conn;
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP disc, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    if (ack_needed)
+        L2CA_DisconnectRsp (l2cap_cid);
+
+    HIDH_TRACE_EVENT1 ("HID - Rcvd L2CAP disc, CID: 0x%x", l2cap_cid);
+
+    p_hcon->conn_state = HID_CONN_STATE_DISCONNECTING;
+
+    if (l2cap_cid == p_hcon->ctrl_cid)
+        p_hcon->ctrl_cid = 0;
+    else
+        p_hcon->intr_cid = 0;
+
+    if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0))
+    {
+        hh_cb.devices[dhandle].state = HID_DEV_NO_CONN;
+        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
+
+        if( !ack_needed )
+            disc_res = btm_get_acl_disc_reason_code();
+
+#if (HID_HOST_MAX_CONN_RETRY > 0)
+        if( (disc_res == HCI_ERR_CONNECTION_TOUT || disc_res == HCI_ERR_UNSPECIFIED) &&
+            (!(hh_cb.devices[dhandle].attr_mask & HID_RECONN_INIT)) &&
+            (hh_cb.devices[dhandle].attr_mask & HID_NORMALLY_CONNECTABLE))
+        {
+            hh_cb.devices[dhandle].conn_tries = 0;
+            hh_cb.devices[dhandle].conn.timer_entry.param = (UINT32) dhandle;
+            btu_start_timer (&(hh_cb.devices[dhandle].conn.timer_entry), BTU_TTYPE_HID_HOST_REPAGE_TO, HID_HOST_REPAGE_WIN);
+        }
+        else
+#endif
+        {
+            /* Set reason code for HID_HDEV_EVT_CLOSE */
+            hid_close_evt_reason = p_hcon->disc_reason;
+
+            /* If we got baseband sent HCI_DISCONNECT_COMPLETE_EVT due to security failure, then set reason to HID_ERR_AUTH_FAILED */
+            if ((disc_res == HCI_ERR_AUTH_FAILURE)                        ||
+                (disc_res == HCI_ERR_KEY_MISSING)                         ||
+                (disc_res == HCI_ERR_HOST_REJECT_SECURITY)                ||
+                (disc_res == HCI_ERR_PAIRING_NOT_ALLOWED)                 ||
+                (disc_res == HCI_ERR_UNIT_KEY_USED)                       ||
+                (disc_res == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED) ||
+                (disc_res == HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE)           ||
+                (disc_res == HCI_ERR_REPEATED_ATTEMPTS))
+            {
+                hid_close_evt_reason = HID_ERR_AUTH_FAILED;
+            }
+
+            hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, hid_close_evt_reason, NULL ) ;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_disconnect_cfm
+**
+** Description      This function handles a disconnect confirm event from L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_disconnect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+
+    /* Find CCB based on CID */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+        p_hcon = &hh_cb.devices[dhandle].conn;
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP disc cfm, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    HIDH_TRACE_EVENT1 ("HID - Rcvd L2CAP disc cfm, CID: 0x%x", l2cap_cid);
+
+    if (l2cap_cid == p_hcon->ctrl_cid)
+        p_hcon->ctrl_cid = 0;
+    else
+        p_hcon->intr_cid = 0;
+
+    if ((p_hcon->ctrl_cid == 0) && (p_hcon->intr_cid == 0))
+    {
+        hh_cb.devices[dhandle].state = HID_DEV_NO_CONN;
+        p_hcon->conn_state = HID_CONN_STATE_UNUSED;
+        hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, p_hcon->disc_reason, NULL ) ;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_cong_ind
+**
+** Description      This function handles a congestion status event from L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_cong_ind (UINT16 l2cap_cid, BOOLEAN congested)
+{
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+
+    /* Find CCB based on CID */
+    if( (dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES )
+        p_hcon = &hh_cb.devices[dhandle].conn;
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP congestion status, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    HIDH_TRACE_EVENT2 ("HID - Rcvd L2CAP congestion status, CID: 0x%x  Cong: %d", l2cap_cid, congested);
+
+    if (congested)
+        p_hcon->conn_flags |= HID_CONN_FLAGS_CONGESTED;
+    else
+    {
+        p_hcon->conn_flags &= ~HID_CONN_FLAGS_CONGESTED;
+
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         hidh_l2cif_data_ind
+**
+** Description      This function is called when data is received from L2CAP.
+**                  if we are the originator of the connection, we are the SDP
+**                  client, and the received message is queued up for the client.
+**
+**                  If we are the destination of the connection, we are the SDP
+**                  server, so the message is passed to the server processing
+**                  function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_l2cif_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg)
+{
+    UINT8           *p_data = (UINT8 *)(p_msg + 1) + p_msg->offset;
+    UINT8           ttype, param, rep_type, evt;
+    UINT8 dhandle;
+    tHID_CONN    *p_hcon = NULL;
+
+    HIDH_TRACE_DEBUG1 ("HID - hidh_l2cif_data_ind [l2cap_cid=0x%04x]", l2cap_cid);
+
+    /* Find CCB based on CID */
+     if ((dhandle = find_conn_by_cid(l2cap_cid)) < HID_HOST_MAX_DEVICES)
+        p_hcon = &hh_cb.devices[dhandle].conn;
+
+    if (p_hcon == NULL)
+    {
+        HIDH_TRACE_WARNING1 ("HID - Rcvd L2CAP data, unknown CID: 0x%x", l2cap_cid);
+        GKI_freebuf (p_msg);
+        return;
+    }
+
+
+    ttype    = HID_GET_TRANS_FROM_HDR(*p_data);
+    param    = HID_GET_PARAM_FROM_HDR(*p_data);
+    rep_type = param & HID_PAR_REP_TYPE_MASK;
+    p_data++;
+
+    /* Get rid of the data type */
+    p_msg->len--;
+    p_msg->offset++;
+
+    switch (ttype)
+    {
+    case HID_TRANS_HANDSHAKE:
+        hh_cb.callback(dhandle, HID_HDEV_EVT_HANDSHAKE, param, NULL);
+        GKI_freebuf (p_msg);
+        break;
+
+    case HID_TRANS_CONTROL:
+        switch (param)
+        {
+        case HID_PAR_CONTROL_VIRTUAL_CABLE_UNPLUG:
+            hidh_conn_disconnect( dhandle ) ;
+            /* Device is unplugging from us. Tell USB */
+            hh_cb.callback(dhandle, HID_HDEV_EVT_VC_UNPLUG, 0, NULL);
+            break;
+
+        default:
+            break;
+        }
+        GKI_freebuf (p_msg);
+        break;
+
+
+    case HID_TRANS_DATA:
+        evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid) ?
+                    HID_HDEV_EVT_INTR_DATA : HID_HDEV_EVT_CTRL_DATA;
+        hh_cb.callback(dhandle, evt, rep_type, p_msg);
+        break;
+
+    case HID_TRANS_DATAC:
+        evt = (hh_cb.devices[dhandle].conn.intr_cid == l2cap_cid) ?
+                    HID_HDEV_EVT_INTR_DATC : HID_HDEV_EVT_CTRL_DATC;
+        hh_cb.callback(dhandle, evt, rep_type, p_msg);
+        break;
+
+    default:
+        GKI_freebuf (p_msg);
+        break;
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         hidh_conn_snd_data
+**
+** Description      This function is sends out data.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+tHID_STATUS hidh_conn_snd_data (UINT8 dhandle, UINT8 trans_type, UINT8 param,
+                                UINT16 data, UINT8 report_id, BT_HDR *buf)
+{
+    tHID_CONN   *p_hcon = &hh_cb.devices[dhandle].conn;
+    BT_HDR      *p_buf;
+    UINT8       *p_out;
+    UINT16      bytes_copied;
+    BOOLEAN     seg_req = FALSE;
+    UINT16      data_size;
+    UINT16      cid;
+    UINT8       pool_id;
+    UINT8       use_data = 0 ;
+    BOOLEAN     blank_datc = FALSE;
+
+    if (p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED)
+    {
+        if (buf)
+            GKI_freebuf ((void *)buf);
+        return( HID_ERR_CONGESTED );
+    }
+
+    switch( trans_type )
+    {
+    case HID_TRANS_CONTROL:
+    case HID_TRANS_GET_REPORT:
+    case HID_TRANS_SET_REPORT:
+    case HID_TRANS_GET_PROTOCOL:
+    case HID_TRANS_SET_PROTOCOL:
+    case HID_TRANS_GET_IDLE:
+    case HID_TRANS_SET_IDLE:
+        cid = p_hcon->ctrl_cid;
+        pool_id = HID_CONTROL_POOL_ID;
+        break;
+    case HID_TRANS_DATA:
+        cid = p_hcon->intr_cid;
+        pool_id = HID_INTERRUPT_POOL_ID;
+        break;
+    default:
+        return (HID_ERR_INVALID_PARAM) ;
+    }
+
+    if( trans_type == HID_TRANS_SET_IDLE )
+        use_data = 1;
+    else if( (trans_type == HID_TRANS_GET_REPORT) && (param & 0x08) )
+        use_data = 2;
+
+    do
+    {
+        if ( buf == NULL || blank_datc )
+        {
+            if((p_buf = (BT_HDR *)GKI_getpoolbuf (pool_id)) == NULL)
+                return (HID_ERR_NO_RESOURCES);
+
+            p_buf->offset = L2CAP_MIN_OFFSET;
+            seg_req = FALSE;
+            data_size = 0;
+            bytes_copied = 0;
+            blank_datc = FALSE;
+        }
+        else if ( (buf->len > (p_hcon->rem_mtu_size - 1)))
+        {
+            if((p_buf = (BT_HDR *)GKI_getpoolbuf (pool_id)) == NULL)
+                return (HID_ERR_NO_RESOURCES);
+
+            p_buf->offset = L2CAP_MIN_OFFSET;
+            seg_req = TRUE;
+            data_size = buf->len;
+            bytes_copied = p_hcon->rem_mtu_size - 1;
+        }
+        else
+        {
+            p_buf = buf ;
+            p_buf->offset -= 1;
+            seg_req = FALSE;
+            data_size = buf->len;
+            bytes_copied = buf->len;
+        }
+
+        p_out         = (UINT8 *)(p_buf + 1) + p_buf->offset;
+        *p_out++      = HID_BUILD_HDR(trans_type, param);
+
+        /* If report ID required for this device */
+        if( (trans_type == HID_TRANS_GET_REPORT) && (report_id != 0) )
+        {
+            *p_out = report_id;
+            data_size = bytes_copied = 1;
+        }
+
+
+        if (seg_req)
+        {
+            memcpy (p_out, (((UINT8 *)(buf+1)) + buf->offset), bytes_copied);
+            buf->offset += bytes_copied;
+            buf->len -= bytes_copied;
+        }
+        else if( use_data == 1)
+        {
+            *(p_out+bytes_copied) = data & 0xff;
+        }
+        else if( use_data == 2 )
+        {
+            *(p_out+bytes_copied) = data & 0xff;
+            *(p_out+bytes_copied+1) = (data >> 8) & 0xff ;
+        }
+
+        p_buf->len   = bytes_copied + 1 + use_data;
+        data_size    -= bytes_copied;
+
+        /* Send the buffer through L2CAP */
+        if ((p_hcon->conn_flags & HID_CONN_FLAGS_CONGESTED) || (!L2CA_DataWrite (cid, p_buf)))
+            return (HID_ERR_CONGESTED);
+
+        if (data_size)
+            trans_type = HID_TRANS_DATAC;
+        else if( bytes_copied == (p_hcon->rem_mtu_size - 1) )
+        {
+            trans_type = HID_TRANS_DATAC;
+            blank_datc = TRUE;
+        }
+
+    } while ((data_size != 0) || blank_datc ) ;
+
+    return (HID_SUCCESS);
+}
+/*******************************************************************************
+**
+** Function         hidh_conn_initiate
+**
+** Description      This function is called by the management to create a connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+tHID_STATUS hidh_conn_initiate (UINT8 dhandle)
+{
+    UINT8   service_id = BTM_SEC_SERVICE_HID_NOSEC_CTRL;
+    UINT32  mx_chan_id = HID_NOSEC_CHN;
+
+    tHID_HOST_DEV_CTB *p_dev = &hh_cb.devices[dhandle];
+
+    if( p_dev->conn.conn_state != HID_CONN_STATE_UNUSED )
+        return( HID_ERR_CONN_IN_PROCESS );
+
+    p_dev->conn.ctrl_cid = 0;
+    p_dev->conn.intr_cid = 0;
+    p_dev->conn.disc_reason = HID_L2CAP_CONN_FAIL;  /* Reset initial reason for CLOSE_EVT: Connection Attempt was made but failed */
+
+    /* We are the originator of this connection */
+    p_dev->conn.conn_flags = HID_CONN_FLAGS_IS_ORIG;
+
+    if(p_dev->attr_mask & HID_SEC_REQUIRED)
+    {
+        service_id = BTM_SEC_SERVICE_HID_SEC_CTRL;
+        mx_chan_id = HID_SEC_CHN;
+    }
+    BTM_SetOutService (p_dev->addr, service_id, mx_chan_id);
+
+    /* Check if L2CAP started the connection process */
+    if ((p_dev->conn.ctrl_cid = L2CA_ConnectReq (HID_PSM_CONTROL, p_dev->addr)) == 0)
+    {
+        HIDH_TRACE_WARNING0 ("HID - Originate failed");
+        dhandle = (p_dev - &(hh_cb.devices[0]))/(sizeof( tHID_HOST_DEV_CTB )) ;
+        hh_cb.callback( dhandle, HID_HDEV_EVT_CLOSE, HID_ERR_L2CAP_FAILED, NULL ) ;
+    }
+    else
+    {
+        /* Transition to the next appropriate state, waiting for connection confirm on control channel. */
+        p_dev->conn.conn_state = HID_CONN_STATE_CONNECTING_CTRL;
+    }
+
+    return( HID_SUCCESS );
+}
+
+
+/*******************************************************************************
+**
+** Function         find_conn_by_cid
+**
+** Description      This function finds a connection control block based on CID
+**
+** Returns          address of control block, or NULL if not found
+**
+*******************************************************************************/
+static UINT8 find_conn_by_cid (UINT16 cid)
+{
+    UINT8      xx;
+
+    for (xx = 0; xx < HID_HOST_MAX_DEVICES; xx++)
+    {
+        if ((hh_cb.devices[xx].in_use) && (hh_cb.devices[xx].conn.conn_state != HID_CONN_STATE_UNUSED)
+            && ((hh_cb.devices[xx].conn.ctrl_cid == cid) || (hh_cb.devices[xx].conn.intr_cid == cid)))
+            break;
+    }
+
+    return (xx);
+}
+
+void hidh_conn_dereg( void )
+{
+    L2CA_Deregister (HID_PSM_CONTROL);
+    L2CA_Deregister (HID_PSM_INTERRUPT);
+}
+
+/*******************************************************************************
+**
+** Function         hidh_conn_retry
+**
+** Description      This function is called to retry a failed connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void hidh_conn_retry(  UINT8 dhandle )
+{
+    tHID_HOST_DEV_CTB *p_dev = &hh_cb.devices[dhandle];
+
+    p_dev->conn.conn_state = HID_CONN_STATE_UNUSED;
+    p_dev->conn.timer_entry.param = (UINT32) dhandle;
+#if (HID_HOST_REPAGE_WIN > 0)
+    btu_start_timer (&(p_dev->conn.timer_entry), BTU_TTYPE_HID_HOST_REPAGE_TO, HID_HOST_REPAGE_WIN);
+#else
+    hidh_proc_repage_timeout( &(p_dev->conn.timer_entry) );
+#endif
+}
diff --git a/stack/hid/hidh_int.h b/stack/hid/hidh_int.h
new file mode 100644
index 0000000..ad07412
--- /dev/null
+++ b/stack/hid/hidh_int.h
@@ -0,0 +1,94 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains HID HOST internal definitions
+ *
+ ******************************************************************************/
+
+#ifndef HIDH_INT_H
+#define HIDH_INT_H
+
+#include "hidh_api.h"
+#include "hid_conn.h"
+#include "l2c_api.h"
+
+enum {
+    HID_DEV_NO_CONN,
+    HID_DEV_CONNECTED
+};
+
+typedef struct per_device_ctb
+{
+    BOOLEAN        in_use;
+    BD_ADDR        addr;  /* BD-Addr of the host device */
+    UINT16         attr_mask; /* 0x01- virtual_cable; 0x02- normally_connectable; 0x03- reconn_initiate;
+    			                 0x04- sdp_disable; */
+    UINT8          state;  /* Device state if in HOST-KNOWN mode */
+    UINT8          conn_substate;
+    UINT8          conn_tries; /* Remembers to the number of connection attempts while CONNECTING */
+
+    tHID_CONN      conn; /* L2CAP channel info */
+} tHID_HOST_DEV_CTB;
+
+typedef struct host_ctb
+{
+    tHID_HOST_DEV_CTB       devices[HID_HOST_MAX_DEVICES];
+    tHID_HOST_DEV_CALLBACK  *callback;             /* Application callbacks */
+    tL2CAP_CFG_INFO         l2cap_cfg;
+
+#define MAX_SERVICE_DB_SIZE    4000
+
+    BOOLEAN                 sdp_busy;
+    tHID_HOST_SDP_CALLBACK  *sdp_cback;
+    tSDP_DISCOVERY_DB       *p_sdp_db;
+    tHID_DEV_SDP_INFO       sdp_rec;
+    BOOLEAN                 reg_flag;
+    UINT8                   trace_level;
+} tHID_HOST_CTB;
+
+extern tHID_STATUS hidh_conn_snd_data(UINT8 dhandle, UINT8 trans_type, UINT8 param, \
+                                      UINT16 data,UINT8 rpt_id, BT_HDR *buf);
+extern tHID_STATUS hidh_conn_reg (void);
+extern void hidh_conn_dereg( void );
+extern tHID_STATUS hidh_conn_disconnect (UINT8 dhandle);
+extern tHID_STATUS hidh_conn_initiate (UINT8 dhandle);
+extern void hidh_proc_repage_timeout (TIMER_LIST_ENT *p_tle);
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+#if HID_DYNAMIC_MEMORY == FALSE
+HID_API extern tHID_HOST_CTB  hh_cb;
+#else
+HID_API extern tHID_HOST_CTB *hidh_cb_ptr;
+#define hh_cb (*hidh_cb_ptr)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/stack/include/a2d_api.h b/stack/include/a2d_api.h
new file mode 100644
index 0000000..f21ba6c
--- /dev/null
+++ b/stack/include/a2d_api.h
@@ -0,0 +1,257 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  nterface to A2DP Application Programming Interface
+ *
+ ******************************************************************************/
+#ifndef A2D_API_H
+#define A2D_API_H
+#include "sdp_api.h"
+
+/*****************************************************************************
+**  constants
+*****************************************************************************/
+
+/* Profile supported features */
+#define A2D_SUPF_PLAYER     0x0001
+#define A2D_SUPF_MIC        0x0002
+#define A2D_SUPF_TUNER      0x0004
+#define A2D_SUPF_MIXER      0x0008
+
+#define A2D_SUPF_HEADPHONE  0x0001
+#define A2D_SUPF_SPEAKER    0x0002
+#define A2D_SUPF_RECORDER   0x0004
+#define A2D_SUPF_AMP        0x0008
+
+/* AV Media Types */
+#define A2D_MEDIA_TYPE_AUDIO    0x00    /* audio media type + RFA */
+#define A2D_MEDIA_TYPE_VIDEO    0x10    /* video media type + RFA */
+#define A2D_MEDIA_TYPE_MULTI    0x20    /* multimedia media type + RFA */
+
+/* AV Media Codec Type (Audio Codec ID) */
+#define A2D_MEDIA_CT_SBC        0x00    /* SBC media codec type */
+#define A2D_MEDIA_CT_M12        0x01    /* MPEG-1, 2 Audio media codec type */
+#define A2D_MEDIA_CT_M24        0x02    /* MPEG-2, 4 AAC media codec type */
+#define A2D_MEDIA_CT_ATRAC      0x04    /* ATRAC family media codec type */
+
+#define A2D_SUCCESS           0     /* Success */
+#define A2D_FAIL              0x0A  /* Failed */
+#define A2D_BUSY              0x0B  /* A2D_FindService is already in progress */
+#define A2D_INVALID_PARAMS    0x0C  /* bad parameters */
+#define A2D_WRONG_CODEC       0x0D  /* wrong codec info */
+#define A2D_BAD_CODEC_TYPE    0xC1  /* Media Codec Type is not valid  */
+#define A2D_NS_CODEC_TYPE     0xC2  /* Media Codec Type is not supported */
+#define A2D_BAD_SAMP_FREQ     0xC3  /* Sampling Frequency is not valid or multiple values have been selected  */
+#define A2D_NS_SAMP_FREQ      0xC4  /* Sampling Frequency is not supported  */
+#define A2D_BAD_CH_MODE       0xC5  /* Channel Mode is not valid or multiple values have been selected  */
+#define A2D_NS_CH_MODE        0xC6  /* Channel Mode is not supported */
+#define A2D_BAD_SUBBANDS      0xC7  /* None or multiple values have been selected for Number of Subbands */
+#define A2D_NS_SUBBANDS       0xC8  /* Number of Subbands is not supported */
+#define A2D_BAD_ALLOC_MTHD    0xC9  /* None or multiple values have been selected for Allocation Method */
+#define A2D_NS_ALLOC_MTHD     0xCA  /* Allocation Method is not supported */
+#define A2D_BAD_MIN_BITPOOL   0xCB  /* Minimum Bitpool Value is not valid */
+#define A2D_NS_MIN_BITPOOL    0xCC  /* Minimum Bitpool Value is not supported */
+#define A2D_BAD_MAX_BITPOOL   0xCD  /* Maximum Bitpool Value is not valid */
+#define A2D_NS_MAX_BITPOOL    0xCE  /* Maximum Bitpool Value is not supported */
+#define A2D_BAD_LAYER         0xCF  /* None or multiple values have been selected for Layer */
+#define A2D_NS_LAYER          0xD0  /* Layer is not supported */
+#define A2D_NS_CRC            0xD1  /* CRC is not supported */
+#define A2D_NS_MPF            0xD2  /* MPF-2 is not supported */
+#define A2D_NS_VBR            0xD3  /* VBR is not supported */
+#define A2D_BAD_BIT_RATE      0xD4  /* None or multiple values have been selected for Bit Rate */
+#define A2D_NS_BIT_RATE       0xD5  /* Bit Rate is not supported */
+#define A2D_BAD_OBJ_TYPE      0xD6  /* Either 1) Object type is not valid (b3-b0) or 2) None or multiple values have been selected for Object Type */
+#define A2D_NS_OBJ_TYPE       0xD7  /* Object type is not supported */
+#define A2D_BAD_CHANNEL       0xD8  /* None or multiple values have been selected for Channels */
+#define A2D_NS_CHANNEL        0xD9  /* Channels is not supported */
+#define A2D_BAD_BLOCK_LEN     0xDD  /* None or multiple values have been selected for Block Length */
+#define A2D_BAD_CP_TYPE       0xE0  /* The requested CP Type is not supported. */
+#define A2D_BAD_CP_FORMAT     0xE1  /* The format of Content Protection Service Capability/Content Protection Scheme Dependent Data is not correct. */
+
+typedef UINT8 tA2D_STATUS;
+
+/* the return values from A2D_BitsSet() */
+#define A2D_SET_ONE_BIT         1   /* one and only one bit is set */
+#define A2D_SET_ZERO_BIT        0   /* all bits clear */
+#define A2D_SET_MULTL_BIT       2   /* multiple bits are set */
+
+/*****************************************************************************
+**  type definitions
+*****************************************************************************/
+
+/* This data type is used in A2D_FindService() to initialize the SDP database
+ * to hold the result service search. */
+typedef struct
+{
+    UINT32              db_len;  /* Length, in bytes, of the discovery database */
+    UINT16              num_attr;/* The number of attributes in p_attrs */
+    tSDP_DISCOVERY_DB  *p_db;    /* Pointer to the discovery database */
+    UINT16             *p_attrs; /* The attributes filter. If NULL, A2DP API sets the attribute filter
+                                  * to be ATTR_ID_SERVICE_CLASS_ID_LIST, ATTR_ID_BT_PROFILE_DESC_LIST,
+                                  * ATTR_ID_SUPPORTED_FEATURES, ATTR_ID_SERVICE_NAME and ATTR_ID_PROVIDER_NAME.
+                                  * If not NULL, the input is taken as the filter. */
+} tA2D_SDP_DB_PARAMS;
+
+/* This data type is used in tA2D_FIND_CBACK to report the result of the SDP discovery process. */
+typedef struct
+{
+    UINT16  service_len;    /* Length, in bytes, of the service name */
+    UINT16  provider_len;   /* Length, in bytes, of the provider name */
+    char *  p_service_name; /* Pointer the service name.  This character string may not be null terminated.
+                             * Use the service_len parameter to safely copy this string */
+    char *  p_provider_name;/* Pointer the provider name.  This character string may not be null terminated.
+                             * Use the provider_len parameter to safely copy this string */
+    UINT16  features;       /* Profile supported features */
+    UINT16  avdt_version;   /* AVDTP protocol version */
+} tA2D_Service;
+
+/* This is the callback to notify the result of the SDP discovery process. */
+typedef void (tA2D_FIND_CBACK)(BOOLEAN found, tA2D_Service * p_service);
+
+
+/*****************************************************************************
+**  external function declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/******************************************************************************
+**
+** Function         A2D_AddRecord
+**
+** Description      This function is called by a server application to add
+**                  SRC or SNK information to an SDP record.  Prior to
+**                  calling this function the application must call
+**                  SDP_CreateRecord() to create an SDP record.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates SRC or SNK.
+**
+**                      p_service_name:  Pointer to a null-terminated character
+**                      string containing the service name.
+**
+**                      p_provider_name:  Pointer to a null-terminated character
+**                      string containing the provider name.
+**
+**                      features:  Profile supported features.
+**
+**                      sdp_handle:  SDP handle returned by SDP_CreateRecord().
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          A2D_SUCCESS if function execution succeeded,
+**                  A2D_INVALID_PARAMS if bad parameters are given.
+**                  A2D_FAIL if function execution failed.
+**
+******************************************************************************/
+A2D_API extern tA2D_STATUS A2D_AddRecord(UINT16 service_uuid, char *p_service_name, char *p_provider_name,
+        UINT16 features, UINT32 sdp_handle);
+
+/******************************************************************************
+**
+** Function         A2D_FindService
+**
+** Description      This function is called by a client application to
+**                  perform service discovery and retrieve SRC or SNK SDP
+**                  record information from a server.  Information is
+**                  returned for the first service record found on the
+**                  server that matches the service UUID.  The callback
+**                  function will be executed when service discovery is
+**                  complete.  There can only be one outstanding call to
+**                  A2D_FindService() at a time; the application must wait
+**                  for the callback before it makes another call to
+**                  the function.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates SRC or SNK.
+**
+**                      bd_addr:  BD address of the peer device.
+**
+**                      p_db:  Pointer to the information to initialize
+**                             the discovery database.
+**
+**                      p_cback:  Pointer to the A2D_FindService()
+**                      callback function.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          A2D_SUCCESS if function execution succeeded,
+**                  A2D_INVALID_PARAMS if bad parameters are given.
+**                  A2D_BUSY if discovery is already in progress.
+**                  A2D_FAIL if function execution failed.
+**
+******************************************************************************/
+A2D_API extern tA2D_STATUS A2D_FindService(UINT16 service_uuid, BD_ADDR bd_addr,
+                        tA2D_SDP_DB_PARAMS *p_db, tA2D_FIND_CBACK *p_cback);
+
+/******************************************************************************
+**
+** Function         A2D_SetTraceLevel
+**
+** Description      Sets the trace level for A2D. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the A2D tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+A2D_API extern UINT8 A2D_SetTraceLevel (UINT8 new_level);
+
+/******************************************************************************
+** Function         A2D_BitsSet
+**
+** Description      Check the given num for the number of bits set
+** Returns          A2D_SET_ONE_BIT, if one and only one bit is set
+**                  A2D_SET_ZERO_BIT, if all bits clear
+**                  A2D_SET_MULTL_BIT, if multiple bits are set
+******************************************************************************/
+A2D_API extern UINT8 A2D_BitsSet(UINT8 num);
+
+#ifdef __cplusplus
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         A2D_Init
+**
+** Description      This function is called at stack startup to allocate the
+**                  control block (if using dynamic memory), and initializes the
+**                  control block and tracing level.
+**
+** Returns          void
+**
+*******************************************************************************/
+A2D_API extern void A2D_Init(void);
+
+#endif /* A2D_API_H */
diff --git a/stack/include/a2d_sbc.h b/stack/include/a2d_sbc.h
new file mode 100644
index 0000000..dad0b8b
--- /dev/null
+++ b/stack/include/a2d_sbc.h
@@ -0,0 +1,212 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  nterface to low complexity subband codec (SBC)
+ *
+ ******************************************************************************/
+#ifndef A2D_SBC_H
+#define A2D_SBC_H
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+/* the length of the SBC Media Payload header. */
+#define A2D_SBC_MPL_HDR_LEN         1
+
+/* the LOSC of SBC media codec capabilitiy */
+#define A2D_SBC_INFO_LEN            6
+
+/* for Codec Specific Information Element */
+#define A2D_SBC_IE_SAMP_FREQ_MSK    0xF0    /* b7-b4 sampling frequency */
+#define A2D_SBC_IE_SAMP_FREQ_16     0x80    /* b7:16  kHz */
+#define A2D_SBC_IE_SAMP_FREQ_32     0x40    /* b6:32  kHz */
+#define A2D_SBC_IE_SAMP_FREQ_44     0x20    /* b5:44.1kHz */
+#define A2D_SBC_IE_SAMP_FREQ_48     0x10    /* b4:48  kHz */
+
+#define A2D_SBC_IE_CH_MD_MSK        0x0F    /* b3-b0 channel mode */
+#define A2D_SBC_IE_CH_MD_MONO       0x08    /* b3: mono */
+#define A2D_SBC_IE_CH_MD_DUAL       0x04    /* b2: dual */
+#define A2D_SBC_IE_CH_MD_STEREO     0x02    /* b1: stereo */
+#define A2D_SBC_IE_CH_MD_JOINT      0x01    /* b0: joint stereo */
+
+#define A2D_SBC_IE_BLOCKS_MSK       0xF0    /* b7-b4 number of blocks */
+#define A2D_SBC_IE_BLOCKS_4         0x80    /* 4 blocks */
+#define A2D_SBC_IE_BLOCKS_8         0x40    /* 8 blocks */
+#define A2D_SBC_IE_BLOCKS_12        0x20    /* 12blocks */
+#define A2D_SBC_IE_BLOCKS_16        0x10    /* 16blocks */
+
+#define A2D_SBC_IE_SUBBAND_MSK      0x0C    /* b3-b2 number of subbands */
+#define A2D_SBC_IE_SUBBAND_4        0x08    /* b3: 4 */
+#define A2D_SBC_IE_SUBBAND_8        0x04    /* b2: 8 */
+
+#define A2D_SBC_IE_ALLOC_MD_MSK     0x03    /* b1-b0 allocation mode */
+#define A2D_SBC_IE_ALLOC_MD_S       0x02    /* b1: SNR */
+#define A2D_SBC_IE_ALLOC_MD_L       0x01    /* b0: loundess */
+
+#define A2D_SBC_IE_MIN_BITPOOL      2
+#define A2D_SBC_IE_MAX_BITPOOL      250
+
+/* for media payload header */
+#define A2D_SBC_HDR_F_MSK           0x80
+#define A2D_SBC_HDR_S_MSK           0x40
+#define A2D_SBC_HDR_L_MSK           0x20
+#define A2D_SBC_HDR_NUM_MSK         0x0F
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* data type for the SBC Codec Information Element*/
+typedef struct
+{
+    UINT8   samp_freq;      /* Sampling frequency */
+    UINT8   ch_mode;        /* Channel mode */
+    UINT8   block_len;      /* Block length */
+    UINT8   num_subbands;   /* Number of subbands */
+    UINT8   alloc_mthd;     /* Allocation method */
+    UINT8   max_bitpool;    /* Maximum bitpool */
+    UINT8   min_bitpool;    /* Minimum bitpool */
+} tA2D_SBC_CIE;
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/******************************************************************************
+**
+** Function         A2D_SbcChkFrInit
+**
+** Description      check if need to init the descramble control block.
+**
+** Returns          nothing.
+******************************************************************************/
+A2D_API extern void A2D_SbcChkFrInit(UINT8 *p_pkt);
+
+/******************************************************************************
+**
+** Function         A2D_SbcDescramble
+**
+** Description      descramble the packet.
+**
+** Returns          nothing.
+******************************************************************************/
+A2D_API extern void A2D_SbcDescramble(UINT8 *p_pkt, UINT16 len);
+
+/******************************************************************************
+**
+** Function         A2D_BldSbcInfo
+**
+** Description      This function is called by an application to build
+**                  the SBC Media Codec Capabilities byte sequence
+**                  beginning from the LOSC octet.
+**                  Input Parameters:
+**                      media_type:  Indicates Audio, or Multimedia.
+**
+**                      p_ie:  The SBC Codec Information Element information.
+**
+**                  Output Parameters:
+**                      p_result:  the resulting codec info byte sequence.
+**
+** Returns          A2D_SUCCESS if function execution succeeded.
+**                  Error status code, otherwise.
+******************************************************************************/
+A2D_API extern tA2D_STATUS A2D_BldSbcInfo(UINT8 media_type, tA2D_SBC_CIE *p_ie,
+                                          UINT8 *p_result);
+
+/******************************************************************************
+**
+** Function         A2D_ParsSbcInfo
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Codec Capabilities byte sequence
+**                  beginning from the LOSC octet.
+**                  Input Parameters:
+**                      p_info:  the byte sequence to parse.
+**
+**                      for_caps:  TRUE, if the byte sequence is for get capabilities response.
+**
+**                  Output Parameters:
+**                      p_ie:  The SBC Codec Information Element information.
+**
+** Returns          A2D_SUCCESS if function execution succeeded.
+**                  Error status code, otherwise.
+******************************************************************************/
+A2D_API extern tA2D_STATUS A2D_ParsSbcInfo(tA2D_SBC_CIE *p_ie, UINT8 *p_info,
+                                           BOOLEAN for_caps);
+
+/******************************************************************************
+**
+** Function         A2D_BldSbcMplHdr
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Payload header.
+**                  Input Parameters:
+**                      frag:  1, if fragmented. 0, otherwise.
+**
+**                      start:  1, if the starting packet of a fragmented frame.
+**
+**                      last:  1, if the last packet of a fragmented frame.
+**
+**                      num:  If frag is 1, this is the number of remaining fragments
+**                            (including this fragment) of this frame.
+**                            If frag is 0, this is the number of frames in this packet.
+**
+**                  Output Parameters:
+**                      p_dst:  the resulting media payload header byte sequence.
+**
+** Returns          void.
+******************************************************************************/
+A2D_API extern void A2D_BldSbcMplHdr(UINT8 *p_dst, BOOLEAN frag, BOOLEAN start,
+                                     BOOLEAN last, UINT8 num);
+
+/******************************************************************************
+**
+** Function         A2D_ParsSbcMplHdr
+**
+** Description      This function is called by an application to parse
+**                  the SBC Media Payload header.
+**                  Input Parameters:
+**                      p_src:  the byte sequence to parse..
+**
+**                  Output Parameters:
+**                      frag:  1, if fragmented. 0, otherwise.
+**
+**                      start:  1, if the starting packet of a fragmented frame.
+**
+**                      last:  1, if the last packet of a fragmented frame.
+**
+**                      num:  If frag is 1, this is the number of remaining fragments
+**                            (including this fragment) of this frame.
+**                            If frag is 0, this is the number of frames in this packet.
+**
+** Returns          void.
+******************************************************************************/
+A2D_API extern void A2D_ParsSbcMplHdr(UINT8 *p_src, BOOLEAN *p_frag,
+                                      BOOLEAN *p_start, BOOLEAN *p_last,
+                                      UINT8 *p_num);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* A2D_SBC_H */
diff --git a/stack/include/avct_api.h b/stack/include/avct_api.h
new file mode 100644
index 0000000..2880011
--- /dev/null
+++ b/stack/include/avct_api.h
@@ -0,0 +1,279 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This interface file contains the interface to the Audio Video Control
+ *  Transport Protocol (AVCTP).
+ *
+ ******************************************************************************/
+#ifndef AVCT_API_H
+#define AVCT_API_H
+
+#include "bt_types.h"
+#include "bt_target.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* API function return value result codes. */
+#define AVCT_SUCCESS                0       /* Function successful */
+#define AVCT_NO_RESOURCES           1       /* Not enough resources */
+#define AVCT_BAD_HANDLE             2       /* Bad handle */
+#define AVCT_PID_IN_USE             3       /* PID already in use */
+#define AVCT_NOT_OPEN               4       /* Connection not open */
+
+/* PSM for AVCT. */
+#define AVCT_PSM                    0x0017
+#define AVCT_BR_PSM                 0x001B
+
+/* Protocol revision numbers */
+#define AVCT_REV_1_0                0x0100
+#define AVCT_REV_1_2                0x0102
+#define AVCT_REV_1_3                0x0103
+
+/* the layer_specific settings */
+#define AVCT_DATA_CTRL              0x0001    /* for the control channel */
+#define AVCT_DATA_BROWSE            0x0002    /* for the browsing channel */
+#define AVCT_DATA_PARTIAL           0x0100    /* Only have room for a partial message */
+
+#define AVCT_MIN_CONTROL_MTU        48  /* Per the AVRC spec, minimum MTU for the control channel */
+#define AVCT_MIN_BROWSE_MTU         335 /* Per the AVRC spec, minimum MTU for the browsing channel */
+
+/* Message offset.  The number of bytes needed by the protocol stack for the
+** protocol headers of an AVCTP message packet.
+*/
+#define AVCT_MSG_OFFSET             15
+#define AVCT_BROWSE_OFFSET          17 /* the default offset for browsing channel */
+
+/* Connection role. */
+#define AVCT_INT                    0       /* Initiator connection */
+#define AVCT_ACP                    1       /* Acceptor connection */
+
+/* Control role. */
+#define AVCT_TARGET                 1       /* target  */
+#define AVCT_CONTROL                2       /* controller  */
+#define AVCT_PASSIVE                4       /* If conflict, allow the other side to succeed  */
+
+/* Command/Response indicator. */
+#define AVCT_CMD                    0       /* Command message */
+#define AVCT_RSP                    2       /* Response message */
+#define AVCT_REJ                    3       /* Message rejected */
+
+/* Control callback events. */
+#define AVCT_CONNECT_CFM_EVT        0       /* Connection confirm */
+#define AVCT_CONNECT_IND_EVT        1       /* Connection indication */
+#define AVCT_DISCONNECT_CFM_EVT     2       /* Disconnect confirm */
+#define AVCT_DISCONNECT_IND_EVT     3       /* Disconnect indication */
+#define AVCT_CONG_IND_EVT           4       /* Congestion indication */
+#define AVCT_UNCONG_IND_EVT         5       /* Uncongestion indication */
+#define AVCT_BROWSE_CONN_CFM_EVT    6       /* Browse Connection confirm */
+#define AVCT_BROWSE_CONN_IND_EVT    7       /* Browse Connection indication */
+#define AVCT_BROWSE_DISCONN_CFM_EVT 8       /* Browse Disconnect confirm */
+#define AVCT_BROWSE_DISCONN_IND_EVT 9       /* Browse Disconnect indication */
+#define AVCT_BROWSE_CONG_IND_EVT    10      /* Congestion indication */
+#define AVCT_BROWSE_UNCONG_IND_EVT  11      /* Uncongestion indication */
+
+
+/* General purpose failure result code for callback events. */
+#define AVCT_RESULT_FAIL            5
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* Control callback function. */
+typedef void (tAVCT_CTRL_CBACK)(UINT8 handle, UINT8 event, UINT16 result,
+                                BD_ADDR peer_addr);
+
+/* Message callback function */
+/* p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE */
+typedef void (tAVCT_MSG_CBACK)(UINT8 handle, UINT8 label, UINT8 cr,
+                               BT_HDR *p_pkt);
+
+/* Structure used by AVCT_CreateConn. */
+typedef struct {
+    tAVCT_CTRL_CBACK    *p_ctrl_cback;      /* Control callback */
+    tAVCT_MSG_CBACK     *p_msg_cback;       /* Message callback */
+    UINT16              pid;                /* Profile ID */
+    UINT8               role;               /* Initiator/acceptor role */
+    UINT8               control;        /* Control role (Control/Target) */
+} tAVCT_CC;
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         AVCT_Register
+**
+** Description      This is the system level registration function for the
+**                  AVCTP protocol.  This function initializes AVCTP and
+**                  prepares the protocol stack for its use.  This function
+**                  must be called once by the system or platform using AVCTP
+**                  before the other functions of the API an be used.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+AVCT_API extern void AVCT_Register(UINT16 mtu, UINT16 mtu_br, UINT8 sec_mask);
+
+/*******************************************************************************
+**
+** Function         AVCT_Deregister
+**
+** Description      This function is called to deregister use AVCTP protocol.
+**                  It is called when AVCTP is no longer being used by any
+**                  application in the system.  Before this function can be
+**                  called, all connections must be removed with
+**                  AVCT_RemoveConn().
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+AVCT_API extern void AVCT_Deregister(void);
+
+/*******************************************************************************
+**
+** Function         AVCT_CreateConn
+**
+** Description      Create an AVCTP connection.  There are two types of
+**                  connections, initiator and acceptor, as determined by
+**                  the p_cc->role parameter.  When this function is called to
+**                  create an initiator connection, an AVCTP connection to
+**                  the peer device is initiated if one does not already exist.
+**                  If an acceptor connection is created, the connection waits
+**                  passively for an incoming AVCTP connection from a peer device.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_CreateConn(UINT8 *p_handle, tAVCT_CC *p_cc,
+                                       BD_ADDR peer_addr);
+
+/*******************************************************************************
+**
+** Function         AVCT_RemoveConn
+**
+** Description      Remove an AVCTP connection.  This function is called when
+**                  the application is no longer using a connection.  If this
+**                  is the last connection to a peer the L2CAP channel for AVCTP
+**                  will be closed.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_RemoveConn(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVCT_CreateBrowse
+**
+** Description      Create an AVCTP connection.  There are two types of
+**                  connections, initiator and acceptor, as determined by
+**                  the p_cc->role parameter.  When this function is called to
+**                  create an initiator connection, an AVCTP connection to
+**                  the peer device is initiated if one does not already exist.
+**                  If an acceptor connection is created, the connection waits
+**                  passively for an incoming AVCTP connection from a peer device.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_CreateBrowse(UINT8 handle, UINT8 role);
+
+/*******************************************************************************
+**
+** Function         AVCT_RemoveBrowse
+**
+** Description      Remove an AVCTP connection.  This function is called when
+**                  the application is no longer using a connection.  If this
+**                  is the last connection to a peer the L2CAP channel for AVCTP
+**                  will be closed.
+**
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_RemoveBrowse(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVCT_GetBrowseMtu
+**
+** Description      Get the peer_mtu for the AVCTP Browse channel of the given
+**                  connection.
+**
+** Returns          the peer browsing channel MTU.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_GetBrowseMtu (UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVCT_GetPeerMtu
+**
+** Description      Get the peer_mtu for the AVCTP channel of the given
+**                  connection.
+**
+** Returns          the peer MTU size.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_GetPeerMtu (UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVCT_MsgReq
+**
+** Description      Send an AVCTP message to a peer device.  In calling
+**                  AVCT_MsgReq(), the application should keep track of the
+**                  congestion state of AVCTP as communicated with events
+**                  AVCT_CONG_IND_EVT and AVCT_UNCONG_IND_EVT.   If the
+**                  application calls AVCT_MsgReq() when AVCTP is congested
+**                  the message may be discarded.  The application may make its
+**                  first call to AVCT_MsgReq() after it receives an
+**                  AVCT_CONNECT_CFM_EVT or AVCT_CONNECT_IND_EVT on control channel or
+**                  AVCT_BROWSE_CONN_CFM_EVT or AVCT_BROWSE_CONN_IND_EVT on browsing channel.
+**
+**                  p_msg->layer_specific must be set to
+**                  AVCT_DATA_CTRL for control channel traffic;
+**                  AVCT_DATA_BROWSE for for browse channel traffic.
+**
+** Returns          AVCT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVCT_API extern UINT16 AVCT_MsgReq(UINT8 handle, UINT8 label, UINT8 cr, BT_HDR *p_msg);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* AVCT_API_H */
+
diff --git a/stack/include/avdt_api.h b/stack/include/avdt_api.h
new file mode 100644
index 0000000..0a9b7f8
--- /dev/null
+++ b/stack/include/avdt_api.h
@@ -0,0 +1,902 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This interface file contains the interface to the Audio Video
+ *  Distribution Transport Protocol (AVDTP).
+ *
+ ******************************************************************************/
+#ifndef AVDT_API_H
+#define AVDT_API_H
+
+#include "bt_types.h"
+#include "bt_target.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+#ifndef AVDT_VERSION
+#define AVDT_VERSION                0x0102
+#endif
+#define AVDT_VERSION_SYNC           0x0103
+
+/* API function return value result codes. */
+#define AVDT_SUCCESS                0       /* Function successful */
+#define AVDT_BAD_PARAMS             1       /* Invalid parameters */
+#define AVDT_NO_RESOURCES           2       /* Not enough resources */
+#define AVDT_BAD_HANDLE             3       /* Bad handle */
+#define AVDT_BUSY                   4       /* A procedure is already in progress */
+#define AVDT_WRITE_FAIL             5       /* Write failed */
+
+/* The index to access the codec type in codec_info[]. */
+#define AVDT_CODEC_TYPE_INDEX       2
+
+/* The size in bytes of a Adaptation Layer header. */
+#define AVDT_AL_HDR_SIZE         3
+
+/* The size in bytes of a media packet header. */
+#define AVDT_MEDIA_HDR_SIZE         12
+
+/* AVDTP 7.5.3 Adaptation Layer Fragmentation
+ * original length of the un-fragmented transport packet should be specified by
+ * two bytes length field of Adaptation Layer Header  */
+#define AVDT_MAX_MEDIA_SIZE         (0xFFFF - AVDT_MEDIA_HDR_SIZE)
+
+/* The handle is used when reporting MULTI_AV specific events */
+#define AVDT_MULTI_AV_HANDLE        0xFF
+
+/* The number of bytes needed by the protocol stack for the protocol headers
+** of a media packet.  This is the size of the media packet header, the
+** L2CAP packet header and HCI header.
+*/
+#define AVDT_MEDIA_OFFSET           23
+
+/* The marker bit is used by the application to mark significant events such
+** as frame boundaries in the data stream.  This constant is used to check or
+** set the marker bit in the m_pt parameter of an AVDT_WriteReq()
+** or AVDT_DATA_IND_EVT.
+*/
+#define AVDT_MARKER_SET             0x80
+
+/* SEP Type.  This indicates the stream endpoint type. */
+#define AVDT_TSEP_SRC               0       /* Source SEP */
+#define AVDT_TSEP_SNK               1       /* Sink SEP */
+
+/* initiator/acceptor role for adaption */
+#define AVDT_INT                0       /* initiator */
+#define AVDT_ACP                1       /* acceptor */
+
+/* Media Type.  This indicates the media type of the stream endpoint. */
+#define AVDT_MEDIA_AUDIO            0       /* Audio SEP */
+#define AVDT_MEDIA_VIDEO            1       /* Video SEP */
+#define AVDT_MEDIA_MULTI            2       /* Multimedia SEP */
+
+/* for reporting packets */
+#define AVDT_RTCP_PT_SR         200     /* the packet type - SR (Sender Report) */
+#define AVDT_RTCP_PT_RR         201     /* the packet type - RR (Receiver Report) */
+#define AVDT_RTCP_PT_SDES       202     /* the packet type - SDES (Source Description) */
+typedef UINT8 AVDT_REPORT_TYPE;
+
+#define AVDT_RTCP_SDES_CNAME    1       /* SDES item CNAME */
+#ifndef AVDT_MAX_CNAME_SIZE
+#define AVDT_MAX_CNAME_SIZE     28
+#endif
+
+/* Protocol service capabilities.  This indicates the protocol service
+** capabilities of a stream endpoint.  This value is a mask.
+** Multiple values can be combined with a bitwise OR.
+*/
+#define AVDT_PSC_TRANS              (1<<1)  /* Media transport */
+#define AVDT_PSC_REPORT             (1<<2)  /* Reporting */
+#define AVDT_PSC_RECOV              (1<<3)  /* Recovery */
+#define AVDT_PSC_HDRCMP             (1<<5)  /* Header compression */
+#define AVDT_PSC_MUX                (1<<6)  /* Multiplexing */
+#define AVDT_PSC_DELAY_RPT          (1<<8)  /* Delay Report */
+
+/* Recovery type.  This indicates the recovery type. */
+#define AVDT_RECOV_RFC2733          1       /* RFC2733 recovery */
+
+/* Header compression capabilities.  This indicates the header compression
+** capabilities.  This value is a mask.  Multiple values can be combined
+** with a bitwise OR.
+*/
+#define AVDT_HDRCMP_MEDIA           (1<<5)  /* Available for media packets */
+#define AVDT_HDRCMP_RECOV           (1<<6)  /* Available for recovery packets */
+#define AVDT_HDRCMP_BACKCH          (1<<7)  /* Back channel supported */
+
+/* Multiplexing capabilities mask. */
+#define AVDT_MUX_FRAG               (1<<7)  /* Allow Adaptation Layer Fragmentation */
+
+/* Application service category. This indicates the application
+** service category.
+*/
+#define AVDT_ASC_PROTECT            4       /* Content protection */
+#define AVDT_ASC_CODEC              7       /* Codec */
+
+/* Error codes.  The following are error codes defined in the AVDTP and GAVDP
+** specifications.  These error codes communicate protocol errors between
+** AVDTP and the application.  More detailed descriptions of the error codes
+** and their appropriate use can be found in the AVDTP and GAVDP specifications.
+** These error codes are unrelated to the result values returned by the
+** AVDTP API functions.
+*/
+#define AVDT_ERR_HEADER             0x01    /* Bad packet header format */
+#define AVDT_ERR_LENGTH             0x11    /* Bad packet length */
+#define AVDT_ERR_SEID               0x12    /* Invalid SEID */
+#define AVDT_ERR_IN_USE             0x13    /* The SEP is in use */
+#define AVDT_ERR_NOT_IN_USE         0x14    /* The SEP is not in use */
+#define AVDT_ERR_CATEGORY           0x17    /* Bad service category */
+#define AVDT_ERR_PAYLOAD            0x18    /* Bad payload format */
+#define AVDT_ERR_NSC                0x19    /* Requested command not supported */
+#define AVDT_ERR_INVALID_CAP        0x1A    /* Reconfigure attempted invalid capabilities */
+#define AVDT_ERR_RECOV_TYPE         0x22    /* Requested recovery type not defined */
+#define AVDT_ERR_MEDIA_TRANS        0x23    /* Media transport capability not correct */
+#define AVDT_ERR_RECOV_FMT          0x25    /* Recovery service capability not correct */
+#define AVDT_ERR_ROHC_FMT           0x26    /* Header compression service capability not correct */
+#define AVDT_ERR_CP_FMT             0x27    /* Content protection service capability not correct */
+#define AVDT_ERR_MUX_FMT            0x28    /* Multiplexing service capability not correct */
+#define AVDT_ERR_UNSUP_CFG          0x29    /* Configuration not supported */
+#define AVDT_ERR_BAD_STATE          0x31    /* Message cannot be processed in this state */
+#define AVDT_ERR_REPORT_FMT         0x65    /* Report service capability not correct */
+#define AVDT_ERR_SERVICE            0x80    /* Invalid service category */
+#define AVDT_ERR_RESOURCE           0x81    /* Insufficient resources */
+#define AVDT_ERR_INVALID_MCT        0xC1    /* Invalid Media Codec Type */
+#define AVDT_ERR_UNSUP_MCT          0xC2    /* Unsupported Media Codec Type */
+#define AVDT_ERR_INVALID_LEVEL      0xC3    /* Invalid Level */
+#define AVDT_ERR_UNSUP_LEVEL        0xC4    /* Unsupported Level */
+#define AVDT_ERR_INVALID_CP         0xE0    /* Invalid Content Protection Type */
+#define AVDT_ERR_INVALID_FORMAT     0xE1    /* Invalid Content Protection format */
+
+/* Additional error codes.  This indicates error codes used by AVDTP
+** in addition to the ones defined in the specifications.
+*/
+#define AVDT_ERR_CONNECT            0x07    /* Connection failed. */
+#define AVDT_ERR_TIMEOUT            0x08    /* Response timeout. */
+
+/* Control callback events. */
+#define AVDT_DISCOVER_CFM_EVT       0       /* Discover confirm */
+#define AVDT_GETCAP_CFM_EVT         1       /* Get capabilities confirm */
+#define AVDT_OPEN_CFM_EVT           2       /* Open confirm */
+#define AVDT_OPEN_IND_EVT           3       /* Open indication */
+#define AVDT_CONFIG_IND_EVT         4       /* Configuration indication */
+#define AVDT_START_CFM_EVT          5       /* Start confirm */
+#define AVDT_START_IND_EVT          6       /* Start indication */
+#define AVDT_SUSPEND_CFM_EVT        7       /* Suspend confirm */
+#define AVDT_SUSPEND_IND_EVT        8       /* Suspend indication */
+#define AVDT_CLOSE_CFM_EVT          9       /* Close confirm */
+#define AVDT_CLOSE_IND_EVT          10      /* Close indication */
+#define AVDT_RECONFIG_CFM_EVT       11      /* Reconfiguration confirm */
+#define AVDT_RECONFIG_IND_EVT       12      /* Reconfiguration indication */
+#define AVDT_SECURITY_CFM_EVT       13      /* Security confirm */
+#define AVDT_SECURITY_IND_EVT       14      /* Security indication */
+#define AVDT_WRITE_CFM_EVT          15      /* Write confirm */
+#define AVDT_CONNECT_IND_EVT        16      /* Signaling channel connected */
+#define AVDT_DISCONNECT_IND_EVT     17      /* Signaling channel disconnected */
+#define AVDT_REPORT_CONN_EVT        18      /* Reporting channel connected */
+#define AVDT_REPORT_DISCONN_EVT     19      /* Reporting channel disconnected */
+#define AVDT_DELAY_REPORT_EVT       20      /* Delay report received */
+#define AVDT_DELAY_REPORT_CFM_EVT   21      /* Delay report response received */
+
+#define AVDT_MAX_EVT                (AVDT_DELAY_REPORT_CFM_EVT)
+
+/* PSM for AVDT */
+#define AVDT_PSM                    0x0019
+
+/* Nonsupported protocol command messages.  This value is used in tAVDT_CS */
+#define AVDT_NSC_SUSPEND            0x01    /* Suspend command not supported */
+#define AVDT_NSC_RECONFIG           0x02    /* Reconfigure command not supported */
+#define AVDT_NSC_SECURITY           0x04    /* Security command not supported */
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+typedef struct
+{
+    UINT32  ntp_sec;        /* NTP time: seconds relative to 0h UTC on 1 January 1900 */
+    UINT32  ntp_frac;       /* NTP time: the fractional part */
+    UINT32  rtp_time;       /* timestamp in RTP header */
+    UINT32  pkt_count;      /* sender's packet count: since starting transmission
+                             * up until the time this SR packet was generated. */
+    UINT32  octet_count;    /* sender's octet count: same comment */
+} tAVDT_SENDER_INFO;
+
+typedef struct
+{
+    UINT8   frag_lost;      /* fraction lost since last RR */
+    UINT32  packet_lost;    /* cumulative number of packets lost since the beginning */
+    UINT32  seq_num_rcvd;   /* extended highest sequence number received */
+    UINT32  jitter;         /* interarrival jitter */
+    UINT32  lsr;            /* last SR timestamp */
+    UINT32  dlsr;           /* delay since last SR */
+} tAVDT_REPORT_BLK;
+
+typedef union
+{
+    tAVDT_SENDER_INFO   sr;
+    tAVDT_REPORT_BLK    rr;
+    UINT8               cname[AVDT_MAX_CNAME_SIZE + 1];
+} tAVDT_REPORT_DATA;
+
+/* This structure contains parameters which are set at registration. */
+typedef struct {
+    UINT16      ctrl_mtu;   /* L2CAP MTU of the AVDTP signaling channel */
+    UINT8       ret_tout;   /* AVDTP signaling retransmission timeout */
+    UINT8       sig_tout;   /* AVDTP signaling message timeout */
+    UINT8       idle_tout;  /* AVDTP idle signaling channel timeout */
+    UINT8       sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
+} tAVDT_REG;
+
+/* This structure contains the SEP information.  This information is
+** transferred during the discovery procedure.
+*/
+typedef struct {
+    BOOLEAN     in_use;         /* TRUE if stream is currently in use */
+    UINT8       seid;           /* Stream endpoint identifier */
+    UINT8       media_type;     /* Media type */
+    UINT8       tsep;           /* SEP type */
+} tAVDT_SEP_INFO;
+
+/* This structure contains the SEP configuration. */
+typedef struct {
+    UINT8   codec_info[AVDT_CODEC_SIZE];        /* Codec capabilities array */
+    UINT8   protect_info[AVDT_PROTECT_SIZE];    /* Content protection capabilities */
+    UINT8   num_codec;                          /* Number of media codec information elements */
+    UINT8   num_protect;                        /* Number of content protection information elements */
+    UINT16  psc_mask;                           /* Protocol service capabilities mask */
+    UINT8   recov_type;                         /* Recovery type */
+    UINT8   recov_mrws;                         /* Maximum recovery window size */
+    UINT8   recov_mnmp;                         /* Recovery maximum number of media packets */
+    UINT8   hdrcmp_mask;                        /* Header compression capabilities */
+#if AVDT_MULTIPLEXING == TRUE
+    UINT8   mux_mask;                           /* Multiplexing capabilities. AVDT_MUX_XXX bits can be combined with a bitwise OR */
+    UINT8   mux_tsid_media;                     /* TSID for media transport session */
+    UINT8   mux_tcid_media;                     /* TCID for media transport session */
+    UINT8   mux_tsid_report;                    /* TSID for reporting transport session */
+    UINT8   mux_tcid_report;                    /* TCID for reporting transport session */
+    UINT8   mux_tsid_recov;                     /* TSID for recovery transport session */
+    UINT8   mux_tcid_recov;                     /* TCID for recovery transport session */
+#endif
+} tAVDT_CFG;
+
+/* Header structure for callback event parameters. */
+typedef struct {
+    UINT8           err_code;           /* Zero if operation succeeded; nonzero if operation failed */
+    UINT8           err_param;          /* Error parameter included for some events */
+    UINT8           label;              /* Transaction label */
+    UINT8           seid;               /* For internal use only */
+    UINT8           sig_id;             /* For internal use only */
+    UINT8           ccb_idx;            /* For internal use only */
+} tAVDT_EVT_HDR;
+
+/* This data structure is associated with the AVDT_GETCAP_CFM_EVT,
+** AVDT_RECONFIG_IND_EVT, and AVDT_RECONFIG_CFM_EVT.
+*/
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    tAVDT_CFG       *p_cfg;             /* Pointer to configuration for this SEP */
+} tAVDT_CONFIG;
+
+/* This data structure is associated with the AVDT_CONFIG_IND_EVT. */
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    tAVDT_CFG       *p_cfg;             /* Pointer to configuration for this SEP */
+    UINT8           int_seid;           /* Stream endpoint ID of stream initiating the operation */
+} tAVDT_SETCONFIG;
+
+/* This data structure is associated with the AVDT_OPEN_IND_EVT and AVDT_OPEN_CFM_EVT. */
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    UINT16          peer_mtu;           /* Transport channel L2CAP MTU of the peer */
+    UINT16          lcid;               /* L2CAP LCID for media channel */
+} tAVDT_OPEN;
+
+/* This data structure is associated with the AVDT_SECURITY_IND_EVT
+** and AVDT_SECURITY_CFM_EVT.
+*/
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    UINT8           *p_data;            /* Pointer to security data */
+    UINT16          len;                /* Length in bytes of the security data */
+} tAVDT_SECURITY;
+
+/* This data structure is associated with the AVDT_DISCOVER_CFM_EVT. */
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    tAVDT_SEP_INFO  *p_sep_info;        /* Pointer to SEP information */
+    UINT8           num_seps;           /* Number of stream endpoints */
+} tAVDT_DISCOVER;
+
+/* This data structure is associated with the AVDT_DELAY_REPORT_EVT. */
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                /* Event header */
+    UINT16          delay;              /* Delay value */
+} tAVDT_DELAY_RPT;
+
+/* Union of all control callback event data structures */
+typedef union {
+    tAVDT_EVT_HDR       hdr;
+    tAVDT_DISCOVER      discover_cfm;
+    tAVDT_CONFIG        getcap_cfm;
+    tAVDT_OPEN          open_cfm;
+    tAVDT_OPEN          open_ind;
+    tAVDT_SETCONFIG     config_ind;
+    tAVDT_EVT_HDR       start_cfm;
+    tAVDT_EVT_HDR       suspend_cfm;
+    tAVDT_EVT_HDR       close_cfm;
+    tAVDT_CONFIG        reconfig_cfm;
+    tAVDT_CONFIG        reconfig_ind;
+    tAVDT_SECURITY      security_cfm;
+    tAVDT_SECURITY      security_ind;
+    tAVDT_EVT_HDR       connect_ind;
+    tAVDT_EVT_HDR       disconnect_ind;
+    tAVDT_EVT_HDR       report_conn;
+    tAVDT_DELAY_RPT     delay_rpt_cmd;
+} tAVDT_CTRL;
+
+/* This is the control callback function.  This function passes control events
+** to the application.  This function is required for all registered stream
+** endpoints and for the AVDT_DiscoverReq() and AVDT_GetCapReq() functions.
+**
+*/
+typedef void (tAVDT_CTRL_CBACK)(UINT8 handle, BD_ADDR bd_addr, UINT8 event,
+                                tAVDT_CTRL *p_data);
+
+/* This is the data callback function.  It is executed when AVDTP has a media
+** packet ready for the application.  This function is required for SNK
+** endpoints and not applicable for SRC endpoints.
+*/
+typedef void (tAVDT_DATA_CBACK)(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
+                                UINT8 m_pt);
+
+#if AVDT_MULTIPLEXING == TRUE
+/* This is the second version of the data callback function. This version uses
+** application buffer assigned by AVDT_SetMediaBuf. Caller can assign different
+** buffer during callback or can leave the current buffer for further using.
+** This callback is called when AVDTP has a media packet ready for the application.
+** This function is required for SNK endpoints and not applicable for SRC endpoints.
+*/
+typedef void (tAVDT_MEDIA_CBACK)(UINT8 handle, UINT8 *p_payload, UINT32 payload_len,
+                                UINT32 time_stamp, UINT16 seq_num, UINT8 m_pt, UINT8 marker);
+#endif
+
+#if AVDT_REPORTING == TRUE
+/* This is the report callback function.  It is executed when AVDTP has a reporting
+** packet ready for the application.  This function is required for streams
+** created with AVDT_PSC_REPORT.
+*/
+typedef void (tAVDT_REPORT_CBACK)(UINT8 handle, AVDT_REPORT_TYPE type,
+                                tAVDT_REPORT_DATA *p_data);
+#endif
+
+typedef UINT16 (tAVDT_GETCAP_REQ) (BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg, tAVDT_CTRL_CBACK *p_cback);
+
+/* This structure contains information required when a stream is created.
+** It is passed to the AVDT_CreateStream() function.
+*/
+typedef struct {
+    tAVDT_CFG           cfg;            /* SEP configuration */
+    tAVDT_CTRL_CBACK    *p_ctrl_cback;  /* Control callback function */
+    tAVDT_DATA_CBACK    *p_data_cback;  /* Data callback function */
+#if AVDT_MULTIPLEXING == TRUE
+    tAVDT_MEDIA_CBACK   *p_media_cback; /* Media callback function. It will be called only if p_data_cback is NULL */
+#endif
+#if AVDT_REPORTING == TRUE
+    tAVDT_REPORT_CBACK  *p_report_cback;/* Report callback function. */
+#endif
+    UINT16              mtu;            /* The L2CAP MTU of the transport channel */
+    UINT16              flush_to;       /* The L2CAP flush timeout of the transport channel */
+    UINT8               tsep;           /* SEP type */
+    UINT8               media_type;     /* Media type */
+    UINT16              nsc_mask;       /* Nonsupported protocol command messages */
+} tAVDT_CS;
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         AVDT_Register
+**
+** Description      This is the system level registration function for the
+**                  AVDTP protocol.  This function initializes AVDTP and
+**                  prepares the protocol stack for its use.  This function
+**                  must be called once by the system or platform using AVDTP
+**                  before the other functions of the API an be used.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDT_Register(tAVDT_REG *p_reg, tAVDT_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDT_Deregister
+**
+** Description      This function is called to deregister use AVDTP protocol.
+**                  It is called when AVDTP is no longer being used by any
+**                  application in the system.  Before this function can be
+**                  called, all streams must be removed with AVDT_RemoveStream().
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDT_Deregister(void);
+
+/*******************************************************************************
+**
+** Function         AVDT_CreateStream
+**
+** Description      Create a stream endpoint.  After a stream endpoint is
+**                  created an application can initiate a connection between
+**                  this endpoint and an endpoint on a peer device.  In
+**                  addition, a peer device can discover, get the capabilities,
+**                  and connect to this endpoint.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_CreateStream(UINT8 *p_handle, tAVDT_CS *p_cs);
+
+/*******************************************************************************
+**
+** Function         AVDT_RemoveStream
+**
+** Description      Remove a stream endpoint.  This function is called when
+**                  the application is no longer using a stream endpoint.
+**                  If this function is called when the endpoint is connected
+**                  the connection is closed and then the stream endpoint
+**                  is removed.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_RemoveStream(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDT_DiscoverReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and discovers
+**                  the stream endpoints on the peer device.  (Please note
+**                  that AVDTP discovery is unrelated to SDP discovery).
+**                  This function can be called at any time regardless of whether
+**                  there is an AVDTP connection to the peer device.
+**
+**                  When discovery is complete, an AVDT_DISCOVER_CFM_EVT
+**                  is sent to the application via its callback function.
+**                  The application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again to the same device until
+**                  discovery is complete.
+**
+**                  The memory addressed by sep_info is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the discovery procedure.  This memory must remain
+**                  accessible until the application receives the
+**                  AVDT_DISCOVER_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_DiscoverReq(BD_ADDR bd_addr, tAVDT_SEP_INFO *p_sep_info,
+                                        UINT8 max_seps, tAVDT_CTRL_CBACK *p_cback);
+
+
+/*******************************************************************************
+**
+** Function         AVDT_GetCapReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and gets the
+**                  capabilities of a stream endpoint on the peer device.
+**                  This function can be called at any time regardless of
+**                  whether there is an AVDTP connection to the peer device.
+**
+**                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
+**                  sent to the application via its callback function.  The
+**                  application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again until the procedure is complete.
+**
+**                  The memory pointed to by p_cfg is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the get capabilities procedure.  This memory must
+**                  remain accessible until the application receives
+**                  the AVDT_GETCAP_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_GetCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
+                                      tAVDT_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDT_GetAllCapReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and gets the
+**                  capabilities of a stream endpoint on the peer device.
+**                  This function can be called at any time regardless of
+**                  whether there is an AVDTP connection to the peer device.
+**
+**                  When the procedure is complete, an AVDT_GETCAP_CFM_EVT is
+**                  sent to the application via its callback function.  The
+**                  application must not call AVDT_GetCapReq() or
+**                  AVDT_DiscoverReq() again until the procedure is complete.
+**
+**                  The memory pointed to by p_cfg is allocated by the
+**                  application.  This memory is written to by AVDTP as part
+**                  of the get capabilities procedure.  This memory must
+**                  remain accessible until the application receives
+**                  the AVDT_GETCAP_CFM_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_GetAllCapReq(BD_ADDR bd_addr, UINT8 seid, tAVDT_CFG *p_cfg,
+                                      tAVDT_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDT_DelayReport
+**
+** Description      This functions sends a Delay Report to the peer device
+**                  that is associated with a particular SEID.
+**                  This function is called by SNK device.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_DelayReport(UINT8 handle, UINT8 seid, UINT16 delay);
+
+/*******************************************************************************
+**
+** Function         AVDT_OpenReq
+**
+** Description      This function initiates a connection to the AVDTP service
+**                  on the peer device, if not already present, and connects
+**                  to a stream endpoint on a peer device.  When the connection
+**                  is completed, an AVDT_OPEN_CFM_EVT is sent to the
+**                  application via the control callback function for this handle.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_OpenReq(UINT8 handle, BD_ADDR bd_addr, UINT8 seid,
+                                    tAVDT_CFG *p_cfg);
+
+
+/*******************************************************************************
+**
+** Function         AVDT_ConfigRsp
+**
+** Description      Respond to a configure request from the peer device.  This
+**                  function must be called if the application receives an
+**                  AVDT_CONFIG_IND_EVT through its control callback.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_ConfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
+                                      UINT8 category);
+
+/*******************************************************************************
+**
+** Function         AVDT_StartReq
+**
+** Description      Start one or more stream endpoints.  This initiates the
+**                  transfer of media packets for the streams.  All stream
+**                  endpoints must previously be opened.  When the streams
+**                  are started, an AVDT_START_CFM_EVT is sent to the
+**                  application via the control callback function for each stream.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_StartReq(UINT8 *p_handles, UINT8 num_handles);
+
+/*******************************************************************************
+**
+** Function         AVDT_SuspendReq
+**
+** Description      Suspend one or more stream endpoints. This suspends the
+**                  transfer of media packets for the streams.  All stream
+**                  endpoints must previously be open and started.  When the
+**                  streams are suspended, an AVDT_SUSPEND_CFM_EVT is sent to
+**                  the application via the control callback function for
+**                  each stream.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SuspendReq(UINT8 *p_handles, UINT8 num_handles);
+
+/*******************************************************************************
+**
+** Function         AVDT_CloseReq
+**
+** Description      Close a stream endpoint.  This stops the transfer of media
+**                  packets and closes the transport channel associated with
+**                  this stream endpoint.  When the stream is closed, an
+**                  AVDT_CLOSE_CFM_EVT is sent to the application via the
+**                  control callback function for this handle.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_CloseReq(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDT_ReconfigReq
+**
+** Description      Reconfigure a stream endpoint.  This allows the application
+**                  to change the codec or content protection capabilities of
+**                  a stream endpoint after it has been opened.  This function
+**                  can only be called if the stream is opened but not started
+**                  or if the stream has been suspended.  When the procedure
+**                  is completed, an AVDT_RECONFIG_CFM_EVT is sent to the
+**                  application via the control callback function for this handle.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_ReconfigReq(UINT8 handle, tAVDT_CFG *p_cfg);
+
+/*******************************************************************************
+**
+** Function         AVDT_ReconfigRsp
+**
+** Description      Respond to a reconfigure request from the peer device.
+**                  This function must be called if the application receives
+**                  an AVDT_RECONFIG_IND_EVT through its control callback.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_ReconfigRsp(UINT8 handle, UINT8 label, UINT8 error_code,
+                                        UINT8 category);
+
+/*******************************************************************************
+**
+** Function         AVDT_SecurityReq
+**
+** Description      Send a security request to the peer device.  When the
+**                  security procedure is completed, an AVDT_SECURITY_CFM_EVT
+**                  is sent to the application via the control callback function
+**                  for this handle.  (Please note that AVDTP security procedures
+**                  are unrelated to Bluetooth link level security.)
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SecurityReq(UINT8 handle, UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         AVDT_SecurityRsp
+**
+** Description      Respond to a security request from the peer device.
+**                  This function must be called if the application receives
+**                  an AVDT_SECURITY_IND_EVT through its control callback.
+**                  (Please note that AVDTP security procedures are unrelated
+**                  to Bluetooth link level security.)
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SecurityRsp(UINT8 handle, UINT8 label, UINT8 error_code,
+                                        UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function         AVDT_WriteReq
+**
+** Description      Send a media packet to the peer device.  The stream must
+**                  be started before this function is called.  Also, this
+**                  function can only be called if the stream is a SRC.
+**
+**                  When AVDTP has sent the media packet and is ready for the
+**                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
+**                  application via the control callback.  The application must
+**                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
+**                  call to AVDT_WriteReq().  If the applications calls
+**                  AVDT_WriteReq() before it receives the event the packet
+**                  will not be sent.  The application may make its first call
+**                  to AVDT_WriteReq() after it receives an AVDT_START_CFM_EVT
+**                  or AVDT_START_IND_EVT.
+**
+**                  The application passes the packet using the BT_HDR structure.
+**                  This structure is described in section 2.1.  The offset
+**                  field must be equal to or greater than AVDT_MEDIA_OFFSET.
+**                  This allows enough space in the buffer for the L2CAP and
+**                  AVDTP headers.
+**
+**                  The memory pointed to by p_pkt must be a GKI buffer
+**                  allocated by the application.  This buffer will be freed
+**                  by the protocol stack; the application must not free
+**                  this buffer.
+**
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_WriteReq(UINT8 handle, BT_HDR *p_pkt, UINT32 time_stamp,
+                                     UINT8 m_pt);
+
+/*******************************************************************************
+**
+** Function         AVDT_ConnectReq
+**
+** Description      This function initiates an AVDTP signaling connection
+**                  to the peer device.  When the connection is completed, an
+**                  AVDT_CONNECT_IND_EVT is sent to the application via its
+**                  control callback function.  If the connection attempt fails
+**                  an AVDT_DISCONNECT_IND_EVT is sent.  The security mask
+**                  parameter overrides the outgoing security mask set in
+**                  AVDT_Register().
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_ConnectReq(BD_ADDR bd_addr, UINT8 sec_mask,
+                                       tAVDT_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDT_DisconnectReq
+**
+** Description      This function disconnect an AVDTP signaling connection
+**                  to the peer device.  When disconnected an
+**                  AVDT_DISCONNECT_IND_EVT is sent to the application via its
+**                  control callback function.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_DisconnectReq(BD_ADDR bd_addr, tAVDT_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDT_GetL2CapChannel
+**
+** Description      Get the L2CAP CID used by the handle.
+**
+** Returns          CID if successful, otherwise 0.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_GetL2CapChannel(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDT_GetSignalChannel
+**
+** Description      Get the L2CAP CID used by the signal channel of the given handle.
+**
+** Returns          CID if successful, otherwise 0.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_GetSignalChannel(UINT8 handle, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         AVDT_WriteDataReq
+**
+** Description      Send a media packet to the peer device.  The stream must
+**                  be started before this function is called.  Also, this
+**                  function can only be called if the stream is a SRC.
+**
+**                  When AVDTP has sent the media packet and is ready for the
+**                  next packet, an AVDT_WRITE_CFM_EVT is sent to the
+**                  application via the control callback.  The application must
+**                  wait for the AVDT_WRITE_CFM_EVT before it makes the next
+**                  call to AVDT_WriteDataReq().  If the applications calls
+**                  AVDT_WriteDataReq() before it receives the event the packet
+**                  will not be sent.  The application may make its first call
+**                  to AVDT_WriteDataReq() after it receives an
+**                  AVDT_START_CFM_EVT or AVDT_START_IND_EVT.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_WriteDataReq(UINT8 handle, UINT8 *p_data, UINT32 data_len,
+                                     UINT32 time_stamp, UINT8 m_pt, UINT8 marker);
+
+/*******************************************************************************
+**
+** Function         AVDT_SetMediaBuf
+**
+** Description      Assigns buffer for media packets or forbids using of assigned
+**                  buffer if argument p_buf is NULL. This function can only
+**                  be called if the stream is a SNK.
+**
+**                  AVDTP uses this buffer to reassemble fragmented media packets.
+**                  When AVDTP receives a complete media packet, it calls the
+**                  p_media_cback assigned by AVDT_CreateStream().
+**                  This function can be called during callback to assign a
+**                  different buffer for next media packet or can leave the current
+**                  buffer for next packet.
+**
+** Returns          AVDT_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SetMediaBuf(UINT8 handle, UINT8 *p_buf, UINT32 buf_len);
+
+/*******************************************************************************
+**
+** Function         AVDT_SendReport
+**
+** Description
+**
+**
+**
+** Returns
+**
+*******************************************************************************/
+AVDT_API extern UINT16 AVDT_SendReport(UINT8 handle, AVDT_REPORT_TYPE type,
+                       tAVDT_REPORT_DATA *p_data);
+
+/******************************************************************************
+**
+** Function         AVDT_SetTraceLevel
+**
+** Description      Sets the trace level for AVDT. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the AVDT tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+AVDT_API extern UINT8 AVDT_SetTraceLevel (UINT8 new_level);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* AVDT_API_H */
diff --git a/stack/include/avdtc_api.h b/stack/include/avdtc_api.h
new file mode 100644
index 0000000..14a1a21
--- /dev/null
+++ b/stack/include/avdtc_api.h
@@ -0,0 +1,231 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This interface file contains the interface AVDTP conformance API.  These
+ *  additional API functions and callback events are provided for
+ *  conformance testing purposes only.  They are not intended to be used by
+ *  an application.
+ *
+ ******************************************************************************/
+#ifndef AVDT_CAPI_H
+#define AVDT_CAPI_H
+
+#include "avdt_api.h"
+
+/* start AVDTC events here to distinguish from AVDT events */
+#define AVDTC_EVT_BEGIN             0x80
+
+#define AVDTC_DISCOVER_IND_EVT      (0 + AVDTC_EVT_BEGIN)   /* Discover indication */
+#define AVDTC_GETCAP_IND_EVT        (1 + AVDTC_EVT_BEGIN)   /* Get capabilities indication */
+#define AVDTC_SETCONFIG_CFM_EVT     (2 + AVDTC_EVT_BEGIN)   /* Set configuration confirm */
+#define AVDTC_GETCONFIG_IND_EVT     (3 + AVDTC_EVT_BEGIN)   /* Get configuration indication */
+#define AVDTC_GETCONFIG_CFM_EVT     (4 + AVDTC_EVT_BEGIN)   /* Get configuration confirm */
+#define AVDTC_OPEN_IND_EVT          (5 + AVDTC_EVT_BEGIN)   /* Open indication */
+#define AVDTC_START_IND_EVT         (6 + AVDTC_EVT_BEGIN)   /* Start indication */
+#define AVDTC_CLOSE_IND_EVT         (7 + AVDTC_EVT_BEGIN)   /* Close indication */
+#define AVDTC_SUSPEND_IND_EVT       (8 + AVDTC_EVT_BEGIN)   /* Suspend indication */
+#define AVDTC_ABORT_IND_EVT         (9 + AVDTC_EVT_BEGIN)   /* Abort indication */
+#define AVDTC_ABORT_CFM_EVT         (10 + AVDTC_EVT_BEGIN)  /* Abort confirm */
+
+typedef struct {
+    tAVDT_EVT_HDR   hdr;                        /* Event header */
+    UINT8           seid_list[AVDT_NUM_SEPS];   /* Array of SEID values */
+    UINT8           num_seps;                   /* Number of values in array */
+} tAVDT_MULTI;
+
+/* Union of all control callback event data structures */
+typedef union {
+    tAVDT_EVT_HDR       hdr;
+    tAVDT_CONFIG        getconfig_cfm;
+    tAVDT_MULTI         start_ind;
+    tAVDT_MULTI         suspend_ind;
+} tAVDTC_CTRL;
+
+typedef void tAVDTC_CTRL_CBACK(UINT8 handle, BD_ADDR bd_addr, UINT8 event, tAVDTC_CTRL *p_data);
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         AVDTC_Init
+**
+** Description      This function is called to begin using the conformance API.
+**                  It must be called after AVDT_Register() and before any
+**                  other API or conformance API functions are called.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_Init(tAVDTC_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         AVDTC_DiscoverRsp
+**
+** Description      Send a discover response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_DiscoverRsp(BD_ADDR bd_addr, UINT8 label,
+                                     tAVDT_SEP_INFO sep_info[], UINT8 num_seps);
+
+/*******************************************************************************
+**
+** Function         AVDTC_GetCapRsp
+**
+** Description     Send a get capabilities response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_GetCapRsp(BD_ADDR bd_addr, UINT8 label, tAVDT_CFG *p_cap);
+
+/*******************************************************************************
+**
+** Function         AVDTC_GetAllCapRsp
+**
+** Description     Send a get all capabilities response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_GetAllCapRsp(BD_ADDR bd_addr, UINT8 label, tAVDT_CFG *p_cap);
+
+/*******************************************************************************
+**
+** Function         AVDTC_GetConfigReq
+**
+** Description      Send a get configuration request.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_GetConfigReq(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDTC_GetConfigRsp
+**
+** Description      Send a get configuration response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_GetConfigRsp(UINT8 handle, UINT8 label, tAVDT_CFG *p_cfg);
+
+/*******************************************************************************
+**
+** Function         AVDTC_OpenReq
+**
+** Description      Send an open request.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_OpenReq(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDTC_OpenRsp
+**
+** Description      Send an open response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_OpenRsp(UINT8 handle, UINT8 label);
+
+/*******************************************************************************
+**
+** Function         AVDTC_StartRsp
+**
+** Description      Send a start response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_StartRsp(UINT8 *p_handles, UINT8 num_handles, UINT8 label);
+
+/*******************************************************************************
+**
+** Function         AVDTC_CloseRsp
+**
+** Description      Send a close response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_CloseRsp(UINT8 handle, UINT8 label);
+
+/*******************************************************************************
+**
+** Function         AVDTC_SuspendRsp
+**
+** Description      Send a suspend response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_SuspendRsp(UINT8 *p_handles, UINT8 num_handles, UINT8 label);
+
+/*******************************************************************************
+**
+** Function         AVDTC_AbortReq
+**
+** Description      Send an abort request.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_AbortReq(UINT8 handle);
+
+/*******************************************************************************
+**
+** Function         AVDTC_AbortRsp
+**
+** Description      Send an abort response.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_AbortRsp(UINT8 handle, UINT8 label);
+
+/*******************************************************************************
+**
+** Function         AVDTC_Rej
+**
+** Description      Send a reject message.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVDT_API extern void AVDTC_Rej(UINT8 handle, BD_ADDR bd_addr, UINT8 cmd, UINT8 label,
+                             UINT8 err_code, UINT8 err_param);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* AVDT_CAPI_H */
+
diff --git a/stack/include/avrc_api.h b/stack/include/avrc_api.h
new file mode 100644
index 0000000..1f4bb7f
--- /dev/null
+++ b/stack/include/avrc_api.h
@@ -0,0 +1,634 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  nterface to AVRCP Application Programming Interface
+ *
+ ******************************************************************************/
+#ifndef AVRC_API_H
+#define AVRC_API_H
+#include "bt_target.h"
+#include "avct_api.h"
+#include "sdp_api.h"
+#include "avrc_defs.h"
+
+/*****************************************************************************
+**  constants
+*****************************************************************************/
+
+/* API function return value result codes. */
+#define AVRC_SUCCESS        AVCT_SUCCESS        /* 0 Function successful */
+#define AVRC_NO_RESOURCES   AVCT_NO_RESOURCES   /* 1 Not enough resources */
+#define AVRC_BAD_HANDLE     AVCT_BAD_HANDLE     /* 2 Bad handle */
+#define AVRC_PID_IN_USE     AVCT_PID_IN_USE     /* 3 PID already in use */
+#define AVRC_NOT_OPEN       AVCT_NOT_OPEN       /* 4 Connection not open */
+#define AVRC_MSG_TOO_BIG    5                   /* 5 the message length exceed the MTU of the browsing channel */
+#define AVRC_FAIL           0x10                /* 0x10 generic failure */
+#define AVRC_BAD_PARAM      0x11                /* 0x11 bad parameter   */
+
+/* Control role - same as AVCT_TARGET/AVCT_CONTROL */
+#define AVRC_CT_TARGET      1                   /* target  */
+#define AVRC_CT_CONTROL     2                   /* controller  */
+#define AVRC_CT_PASSIVE     4                   /* If conflict, allow the other side to succeed  */
+
+/* Connection role */
+#define AVRC_CONN_INT       AVCT_INT            /* initiator */
+#define AVRC_CONN_ACP       AVCT_ACP            /* Acceptor  */
+
+
+/* AVRC CTRL events */
+/* AVRC_OPEN_IND_EVT event is sent when the connection is successfully opened.
+ * This eventis sent in response to an AVRC_Open(). */
+#define AVRC_OPEN_IND_EVT       0
+
+/* AVRC_CLOSE_IND_EVT event is sent when a connection is closed.
+ * This event can result from a call to AVRC_Close() or when the peer closes
+ * the connection.  It is also sent when a connection attempted through
+ * AVRC_Open() fails. */
+#define AVRC_CLOSE_IND_EVT      1
+
+/* AVRC_CONG_IND_EVT event indicates that AVCTP is congested and cannot send
+ * any more messages. */
+#define AVRC_CONG_IND_EVT       2
+
+/* AVRC_UNCONG_IND_EVT event indicates that AVCTP is uncongested and ready to
+ * send messages. */
+#define AVRC_UNCONG_IND_EVT     3
+
+ /* AVRC_BROWSE_OPEN_IND_EVT event is sent when the browse channel is successfully opened.
+ * This eventis sent in response to an AVRC_Open() or AVRC_OpenBrowse() . */
+#define AVRC_BROWSE_OPEN_IND_EVT       4
+
+/* AVRC_BROWSE_CLOSE_IND_EVT event is sent when a browse channel is closed.
+ * This event can result from a call to AVRC_Close(), AVRC_CloseBrowse() or when the peer closes
+ * the connection.  It is also sent when a connection attempted through
+ * AVRC_OpenBrowse() fails. */
+#define AVRC_BROWSE_CLOSE_IND_EVT      5
+
+/* AVRC_BROWSE_CONG_IND_EVT event indicates that AVCTP browse channel is congested and cannot send
+ * any more messages. */
+#define AVRC_BROWSE_CONG_IND_EVT       6
+
+/* AVRC_BROWSE_UNCONG_IND_EVT event indicates that AVCTP browse channel is uncongested and ready to
+ * send messages. */
+#define AVRC_BROWSE_UNCONG_IND_EVT     7
+
+/* Supported categories */
+#define AVRC_SUPF_CT_CAT1               0x0001      /* Category 1 */
+#define AVRC_SUPF_CT_CAT2               0x0002      /* Category 2 */
+#define AVRC_SUPF_CT_CAT3               0x0004      /* Category 3 */
+#define AVRC_SUPF_CT_CAT4               0x0008      /* Category 4 */
+#define AVRC_SUPF_CT_BROWSE             0x0040      /* Browsing */
+
+#define AVRC_SUPF_TG_CAT1               0x0001      /* Category 1 */
+#define AVRC_SUPF_TG_CAT2               0x0002      /* Category 2 */
+#define AVRC_SUPF_TG_CAT3               0x0004      /* Category 3 */
+#define AVRC_SUPF_TG_CAT4               0x0008      /* Category 4 */
+#define AVRC_SUPF_TG_APP_SETTINGS       0x0010      /* Player Application Settings */
+#define AVRC_SUPF_TG_GROUP_NAVI         0x0020      /* Group Navigation */
+#define AVRC_SUPF_TG_BROWSE             0x0040      /* Browsing */
+#define AVRC_SUPF_TG_MULTI_PLAYER       0x0080      /* Muliple Media Player */
+
+#define AVRC_META_SUCCESS               AVRC_SUCCESS
+#define AVRC_META_FAIL                  AVRC_FAIL
+#define AVRC_METADATA_CMD               0x0000
+#define AVRC_METADATA_RESP              0x0001
+
+
+
+/*****************************************************************************
+**  data type definitions
+*****************************************************************************/
+
+/* This data type is used in AVRC_FindService() to initialize the SDP database
+ * to hold the result service search. */
+typedef struct
+{
+    UINT32              db_len;  /* Length, in bytes, of the discovery database */
+    tSDP_DISCOVERY_DB  *p_db;    /* Pointer to the discovery database */
+    UINT16              num_attr;/* The number of attributes in p_attrs */
+    UINT16             *p_attrs; /* The attributes filter. If NULL, AVRCP API sets the attribute filter
+                                  * to be ATTR_ID_SERVICE_CLASS_ID_LIST, ATTR_ID_BT_PROFILE_DESC_LIST,
+                                  * ATTR_ID_SUPPORTED_FEATURES, ATTR_ID_SERVICE_NAME and ATTR_ID_PROVIDER_NAME.
+                                  * If not NULL, the input is taken as the filter. */
+} tAVRC_SDP_DB_PARAMS;
+
+/* This callback function returns service discovery information to the
+ * application after the AVRC_FindService() API function is called.  The
+ * implementation of this callback function must copy the p_service_name
+ * and p_provider_name parameters passed to it as they are not guaranteed
+ * to remain after the callback function exits. */
+typedef void (tAVRC_FIND_CBACK) (UINT16 status);
+
+
+/* This is the control callback function.  This function passes events
+ * listed in Table 20 to the application. */
+typedef void (tAVRC_CTRL_CBACK) (UINT8 handle, UINT8 event, UINT16 result,
+             BD_ADDR peer_addr);
+
+
+/* This is the message callback function.  It is executed when AVCTP has
+ * a message packet ready for the application.  The implementation of this
+ * callback function must copy the tAVRC_MSG structure passed to it as it
+ * is not guaranteed to remain after the callback function exits. */
+typedef void (tAVRC_MSG_CBACK) (UINT8 handle, UINT8 label, UINT8 opcode,
+             tAVRC_MSG *p_msg);
+
+typedef struct
+{
+    tAVRC_CTRL_CBACK    *p_ctrl_cback;  /* pointer to application control callback */
+    tAVRC_MSG_CBACK     *p_msg_cback;   /* pointer to application message callback */
+    UINT32              company_id;     /* the company ID  */
+    UINT8               conn;           /* Connection role (Initiator/acceptor) */
+    UINT8               control;        /* Control role (Control/Target) */
+} tAVRC_CONN_CB;
+
+
+
+/*****************************************************************************
+**  external function declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+**
+** Function         AVRC_AddRecord
+**
+** Description      This function is called to build an AVRCP SDP record.
+**                  Prior to calling this function the application must
+**                  call SDP_CreateRecord() to create an SDP record.
+**
+**                  Input Parameters:
+**                      service_uuid:  Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+**                                            or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
+**
+**                      p_service_name:  Pointer to a null-terminated character
+**                      string containing the service name.
+**                      If service name is not used set this to NULL.
+**
+**                      p_provider_name:  Pointer to a null-terminated character
+**                      string containing the provider name.
+**                      If provider name is not used set this to NULL.
+**
+**                      categories:  Supported categories.
+**
+**                      sdp_handle:  SDP handle returned by SDP_CreateRecord().
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_NO_RESOURCES if not enough resources to build the SDP record.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_AddRecord(UINT16 service_uuid, char *p_service_name,
+                char *p_provider_name, UINT16 categories, UINT32 sdp_handle);
+
+/******************************************************************************
+**
+** Function         AVRC_FindService
+**
+** Description      This function is called by the application to perform service
+**                  discovery and retrieve AVRCP SDP record information from a
+**                  peer device.  Information is returned for the first service
+**                  record found on the server that matches the service UUID.
+**                  The callback function will be executed when service discovery
+**                  is complete.  There can only be one outstanding call to
+**                  AVRC_FindService() at a time; the application must wait for
+**                  the callback before it makes another call to the function.
+**                  The application is responsible for allocating memory for the
+**                  discovery database.  It is recommended that the size of the
+**                  discovery database be at least 300 bytes.  The application
+**                  can deallocate the memory after the callback function has
+**                  executed.
+**
+**                  Input Parameters:
+**                      service_uuid: Indicates TG(UUID_SERVCLASS_AV_REM_CTRL_TARGET)
+**                                           or CT(UUID_SERVCLASS_AV_REMOTE_CONTROL)
+**
+**                      bd_addr:  BD address of the peer device.
+**
+**                      p_db:  SDP discovery database parameters.
+**
+**                      p_cback:  Pointer to the callback function.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_PARAMS if discovery database parameters are invalid.
+**                  AVRC_NO_RESOURCES if there are not enough resources to
+**                                    perform the service search.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_FindService(UINT16 service_uuid, BD_ADDR bd_addr,
+                tAVRC_SDP_DB_PARAMS *p_db, tAVRC_FIND_CBACK *p_cback);
+
+/******************************************************************************
+**
+** Function         AVRC_Open
+**
+** Description      This function is called to open a connection to AVCTP.
+**                  The connection can be either an initiator or acceptor, as
+**                  determined by the p_ccb->stream parameter.
+**                  The connection can be a target, a controller or for both role,
+**                  as determined by the p_ccb->control parameter.
+**                  By definition, a target connection is an acceptor connection
+**                  that waits for an incoming AVCTP connection from the peer.
+**                  The connection remains available to the application until
+**                  the application closes it by calling AVRC_Close().  The
+**                  application does not need to reopen the connection after an
+**                  AVRC_CLOSE_IND_EVT is received.
+**
+**                  Input Parameters:
+**                      p_ccb->company_id: Company Identifier.
+**
+**                      p_ccb->p_ctrl_cback:  Pointer to control callback function.
+**
+**                      p_ccb->p_msg_cback:  Pointer to message callback function.
+**
+**                      p_ccb->conn: AVCTP connection role.  This is set to
+**                      AVCTP_INT for initiator connections and AVCTP_ACP
+**                      for acceptor connections.
+**
+**                      p_ccb->control: Control role.  This is set to
+**                      AVRC_CT_TARGET for target connections, AVRC_CT_CONTROL
+**                      for control connections or (AVRC_CT_TARGET|AVRC_CT_CONTROL)
+**                      for connections that support both roles.
+**
+**                      peer_addr: BD address of peer device.  This value is
+**                      only used for initiator connections; for acceptor
+**                      connections it can be set to NULL.
+**
+**                  Output Parameters:
+**                      p_handle: Pointer to handle.  This parameter is only
+**                                valid if AVRC_SUCCESS is returned.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_NO_RESOURCES if there are not enough resources to open
+**                  the connection.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_Open(UINT8 *p_handle, tAVRC_CONN_CB *p_ccb,
+                                 BD_ADDR_PTR peer_addr);
+
+/******************************************************************************
+**
+** Function         AVRC_Close
+**
+** Description      Close a connection opened with AVRC_Open().
+**                  This function is called when the
+**                  application is no longer using a connection.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_Close(UINT8 handle);
+
+/******************************************************************************
+**
+** Function         AVRC_OpenBrowse
+**
+** Description      This function is called to open a browsing connection to AVCTP.
+**                  The connection can be either an initiator or acceptor, as
+**                  determined by the conn_role.
+**                  The handle is returned by a previous call to AVRC_Open.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_NO_RESOURCES if there are not enough resources to open
+**                  the connection.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_OpenBrowse(UINT8 handle, UINT8 conn_role);
+
+/******************************************************************************
+**
+** Function         AVRC_CloseBrowse
+**
+** Description      Close a connection opened with AVRC_OpenBrowse().
+**                  This function is called when the
+**                  application is no longer using a connection.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_CloseBrowse(UINT8 handle);
+
+/******************************************************************************
+**
+** Function         AVRC_MsgReq
+**
+** Description      This function is used to send the AVRCP byte stream in p_pkt
+**                  down to AVCTP.
+**
+**                  It is expected that p_pkt->offset is at least AVCT_MSG_OFFSET
+**                  p_pkt->layer_specific is AVCT_DATA_CTRL or AVCT_DATA_BROWSE
+**                  p_pkt->event is AVRC_OP_VENDOR, AVRC_OP_PASS_THRU or AVRC_OP_BROWSING
+**                  The above BT_HDR settings are set by the AVRC_Bld* functions.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_MsgReq (UINT8 handle, UINT8 label, UINT8 ctype, BT_HDR *p_pkt);
+
+/******************************************************************************
+**
+** Function         AVRC_UnitCmd
+**
+** Description      Send a UNIT INFO command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_UnitCmd(UINT8 handle, UINT8 label);
+
+/******************************************************************************
+**
+** Function         AVRC_SubCmd
+**
+** Description      Send a SUBUNIT INFO command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      page: Specifies which part of the subunit type table
+**                      is requested.  For AVRCP it is typically zero.
+**                      Value range is 0-7.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_SubCmd(UINT8 handle, UINT8 label, UINT8 page);
+
+
+/******************************************************************************
+**
+** Function         AVRC_PassCmd
+**
+** Description      Send a PASS THROUGH command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      p_msg: Pointer to PASS THROUGH message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_PassCmd(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg);
+
+/******************************************************************************
+**
+** Function         AVRC_PassRsp
+**
+** Description      Send a PASS THROUGH response to the peer device.  This
+**                  function can only be called for target role connections.
+**                  This function must be called when a PASS THROUGH command
+**                  message is received from the peer through the
+**                  tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.  Must be the same value as
+**                      passed with the command message in the callback function.
+**
+**                      p_msg: Pointer to PASS THROUGH message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_PassRsp(UINT8 handle, UINT8 label, tAVRC_MSG_PASS *p_msg);
+
+
+/******************************************************************************
+**
+** Function         AVRC_VendorCmd
+**
+** Description      Send a VENDOR DEPENDENT command to the peer device.  This
+**                  function can only be called for controller role connections.
+**                  Any response message from the peer is passed back through
+**                  the tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.
+**
+**                      p_msg: Pointer to VENDOR DEPENDENT message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_VendorCmd(UINT8  handle, UINT8  label, tAVRC_MSG_VENDOR *p_msg);
+
+
+/******************************************************************************
+**
+** Function         AVRC_VendorRsp
+**
+** Description      Send a VENDOR DEPENDENT response to the peer device.  This
+**                  function can only be called for target role connections.
+**                  This function must be called when a VENDOR DEPENDENT
+**                  command message is received from the peer through the
+**                  tAVRC_MSG_CBACK callback function.
+**
+**                  Input Parameters:
+**                      handle: Handle of this connection.
+**
+**                      label: Transaction label.  Must be the same value as
+**                      passed with the command message in the callback function.
+**
+**                      p_msg: Pointer to VENDOR DEPENDENT message structure.
+**
+**                  Output Parameters:
+**                      None.
+**
+** Returns          AVRC_SUCCESS if successful.
+**                  AVRC_BAD_HANDLE if handle is invalid.
+**
+******************************************************************************/
+AVRC_API extern UINT16 AVRC_VendorRsp(UINT8  handle, UINT8  label, tAVRC_MSG_VENDOR *p_msg);
+
+
+/******************************************************************************
+**
+** Function         AVRC_SetTraceLevel
+**
+** Description      Sets the trace level for AVRC. If 0xff is passed, the
+**                  current trace level is returned.
+**
+**                  Input Parameters:
+**                      new_level:  The level to set the AVRC tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+******************************************************************************/
+AVRC_API extern UINT8 AVRC_SetTraceLevel (UINT8 new_level);
+
+/*******************************************************************************
+**
+** Function         AVRC_Init
+**
+** Description      This function is called at stack startup to allocate the
+**                  control block (if using dynamic memory), and initializes the
+**                  control block and tracing level.
+**
+** Returns          void
+**
+*******************************************************************************/
+AVRC_API extern void AVRC_Init(void);
+
+/*******************************************************************************
+**
+** Function         AVRC_ParsCommand
+**
+** Description      This function is used to parse the received command.
+**
+** Returns          AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully.
+**                  Otherwise, the error code defined by AVRCP 1.4
+**
+*******************************************************************************/
+AVRC_API extern tAVRC_STS AVRC_ParsCommand (tAVRC_MSG *p_msg, tAVRC_COMMAND *p_result, UINT8 *p_buf, UINT16 buf_len);
+
+/*******************************************************************************
+**
+** Function         AVRC_ParsResponse
+**
+** Description      This function is used to parse the received response.
+**
+** Returns          AVRC_STS_NO_ERROR, if the message in p_data is parsed successfully.
+**                  Otherwise, the error code defined by AVRCP 1.4
+**
+*******************************************************************************/
+AVRC_API extern tAVRC_STS AVRC_ParsResponse (tAVRC_MSG *p_msg, tAVRC_RESPONSE *p_result, UINT8 *p_buf, UINT16 buf_len);
+
+/*******************************************************************************
+**
+** Function         AVRC_BldCommand
+**
+** Description      This function builds the given AVRCP command to the given
+**                  GKI buffer
+**
+** Returns          AVRC_STS_NO_ERROR, if the command is built successfully
+**                  Otherwise, the error code.
+**
+*******************************************************************************/
+AVRC_API extern tAVRC_STS AVRC_BldCommand( tAVRC_COMMAND *p_cmd, BT_HDR **pp_pkt);
+
+/*******************************************************************************
+**
+** Function         AVRC_BldResponse
+**
+** Description      This function builds the given AVRCP response to the given
+**                  GKI buffer
+**
+** Returns          AVRC_STS_NO_ERROR, if the response is built successfully
+**                  Otherwise, the error code.
+**
+*******************************************************************************/
+AVRC_API extern tAVRC_STS AVRC_BldResponse( UINT8 handle, tAVRC_RESPONSE *p_rsp, BT_HDR **pp_pkt);
+
+/**************************************************************************
+**
+** Function         AVRC_IsValidAvcType
+**
+** Description      Check if correct AVC type is specified
+**
+** Returns          returns TRUE if it is valid
+**
+**
+*******************************************************************************/
+AVRC_API extern BOOLEAN AVRC_IsValidAvcType(UINT8 pdu_id, UINT8 avc_type);
+
+/*******************************************************************************
+**
+** Function         AVRC_IsValidPlayerAttr
+**
+** Description      Check if the given attrib value is a valid one
+**
+**
+** Returns          returns TRUE if it is valid
+**
+*******************************************************************************/
+AVRC_API extern BOOLEAN AVRC_IsValidPlayerAttr(UINT8 attr);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* AVRC_API_H */
diff --git a/stack/include/avrc_defs.h b/stack/include/avrc_defs.h
new file mode 100644
index 0000000..16ba057
--- /dev/null
+++ b/stack/include/avrc_defs.h
@@ -0,0 +1,1419 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2006-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  AVRCP definition and data types
+ *
+ ******************************************************************************/
+#ifndef _AVRC_DEFS_H
+#define _AVRC_DEFS_H
+
+/*****************************************************************************
+**  constants
+*****************************************************************************/
+
+/* Profile revision numbers */
+#define AVRC_REV_1_0        0x0100
+#define AVRC_REV_1_3        0x0103
+#define AVRC_REV_1_4        0x0104
+
+#define AVRC_PACKET_LEN             512 /* Per the spec, you must support 512 byte RC packets */
+
+#define AVRC_MIN_CONTROL_MTU        48  /* Per the spec, minimum MTU for the control channel */
+#define AVRC_MIN_BROWSE_MTU         335 /* Per the spec, minimum MTU for the browsing channel */
+
+#define AVRC_META_PDU_OFFSET        4
+#define AVRC_SUB_TYPE_LEN           4
+#define AVRC_UID_SIZE               8
+#define AVRC_FEATURE_MASK_SIZE      16
+
+/* command type codes */
+#define AVRC_CMD_CTRL       0   /* Instruct a target to perform an operation */
+#define AVRC_CMD_STATUS     1   /* Check a device’s current status */
+#define AVRC_CMD_SPEC_INQ   2   /* Check whether a target supports a particular
+                                   control command; all operands are included */
+#define AVRC_CMD_NOTIF      3   /* Used for receiving notification of a change in a device’s state */
+#define AVRC_CMD_GEN_INQ    4   /* Check whether a target supports a particular
+                                   control command; operands are not included */
+
+/* response type codes */
+#define AVRC_RSP_NOT_IMPL   8   /* The target does not implement the command specified
+                                   by the opcode and operand,
+                                   or doesn’t implement the specified subunit */
+#define AVRC_RSP_ACCEPT     9   /* The target executed or is executing the command */
+#define AVRC_RSP_REJ        10  /* The target implements the command specified by the
+                                   opcode but cannot respond because the current state
+                                   of the target doesn’t allow it */
+#define AVRC_RSP_IN_TRANS   11  /* The target implements the status command but it is
+                                   in a state of transition; the status command may
+                                   be retried at a future time */
+#define AVRC_RSP_IMPL_STBL  12  /* For specific inquiry or general inquiy commands,
+                                   the target implements the command; for status
+                                   commands, the target returns stable and includes
+                                   the status results */
+#define AVRC_RSP_CHANGED    13  /* The response frame contains a notification that the
+                                   target device’s state has changed */
+#define AVRC_RSP_INTERIM    15  /* For control commands, the target has accepted the
+                                   request but cannot return information within 100
+                                   milliseconds; for notify commands, the target accepted
+                                   the command, and will notify the controller of a change
+                                   of target state at a future time */
+
+/* subunit type */
+#define AVRC_SUB_MONITOR    0x00    /* Monitor */
+#define AVRC_SUB_AUDIO      0x01    /* Audio */
+#define AVRC_SUB_PRINTER    0x02    /* Printer */
+#define AVRC_SUB_DISC       0x03    /* Disc */
+#define AVRC_SUB_TAPE       0x04    /* Tape recorder/player */
+#define AVRC_SUB_TUNER      0x05    /* Tuner */
+#define AVRC_SUB_CA         0x06    /* CA */
+#define AVRC_SUB_CAMERA     0x07    /* Camera */
+#define AVRC_SUB_PANEL      0x09    /* Panel */
+#define AVRC_SUB_BB         0x0A    /* Bulletin Board */
+#define AVRC_SUB_CAM_STOR   0x0B    /* Camera Storage */
+#define AVRC_SUB_VENDOR     0x1C    /* Vendor unique */
+#define AVRC_SUB_EXT        0x1E    /* Subunit type extended to next byte */
+#define AVRC_SUB_UNIT       0x1F    /* Unit */
+
+/* opcodes - defined by 1394ta */
+#define AVRC_OP_UNIT_INFO   0x30    /* Report unit information */
+#define AVRC_OP_SUB_INFO    0x31    /* Report subunit information */
+#define AVRC_OP_VENDOR      0x00    /* Vendor-dependent commands */
+#define AVRC_OP_PASS_THRU   0x7C    /* panel subunit opcode */
+/* opcodes 80-9F and E0-FF are not used by 1394ta.Sneak one for the browsing channel */
+#define AVRC_OP_BROWSE      0xFF    /* Browsing */
+#define AVRC_OP_INVALID     0xFE    /* invalid one */
+
+/* Company ID's
+*/
+#define AVRC_CO_BLUETOOTH_SIG   0x00FFFFFF
+#define AVRC_CO_WIDCOMM         0x00000361
+#define AVRC_CO_BROADCOM        0x00001018
+#define AVRC_CO_METADATA        0x00001958  /* Unique COMPANY ID for Metadata messages */
+
+/* State flag for Passthrough commands
+*/
+#define AVRC_STATE_PRESS    0
+#define AVRC_STATE_RELEASE  1
+
+/* Operation ID list for Passthrough commands
+*/
+#define AVRC_ID_SELECT      0x00    /* select */
+#define AVRC_ID_UP          0x01    /* up */
+#define AVRC_ID_DOWN        0x02    /* down */
+#define AVRC_ID_LEFT        0x03    /* left */
+#define AVRC_ID_RIGHT       0x04    /* right */
+#define AVRC_ID_RIGHT_UP    0x05    /* right-up */
+#define AVRC_ID_RIGHT_DOWN  0x06    /* right-down */
+#define AVRC_ID_LEFT_UP     0x07    /* left-up */
+#define AVRC_ID_LEFT_DOWN   0x08    /* left-down */
+#define AVRC_ID_ROOT_MENU   0x09    /* root menu */
+#define AVRC_ID_SETUP_MENU  0x0A    /* setup menu */
+#define AVRC_ID_CONT_MENU   0x0B    /* contents menu */
+#define AVRC_ID_FAV_MENU    0x0C    /* favorite menu */
+#define AVRC_ID_EXIT        0x0D    /* exit */
+#define AVRC_ID_0           0x20    /* 0 */
+#define AVRC_ID_1           0x21    /* 1 */
+#define AVRC_ID_2           0x22    /* 2 */
+#define AVRC_ID_3           0x23    /* 3 */
+#define AVRC_ID_4           0x24    /* 4 */
+#define AVRC_ID_5           0x25    /* 5 */
+#define AVRC_ID_6           0x26    /* 6 */
+#define AVRC_ID_7           0x27    /* 7 */
+#define AVRC_ID_8           0x28    /* 8 */
+#define AVRC_ID_9           0x29    /* 9 */
+#define AVRC_ID_DOT         0x2A    /* dot */
+#define AVRC_ID_ENTER       0x2B    /* enter */
+#define AVRC_ID_CLEAR       0x2C    /* clear */
+#define AVRC_ID_CHAN_UP     0x30    /* channel up */
+#define AVRC_ID_CHAN_DOWN   0x31    /* channel down */
+#define AVRC_ID_PREV_CHAN   0x32    /* previous channel */
+#define AVRC_ID_SOUND_SEL   0x33    /* sound select */
+#define AVRC_ID_INPUT_SEL   0x34    /* input select */
+#define AVRC_ID_DISP_INFO   0x35    /* display information */
+#define AVRC_ID_HELP        0x36    /* help */
+#define AVRC_ID_PAGE_UP     0x37    /* page up */
+#define AVRC_ID_PAGE_DOWN   0x38    /* page down */
+#define AVRC_ID_POWER       0x40    /* power */
+#define AVRC_ID_VOL_UP      0x41    /* volume up */
+#define AVRC_ID_VOL_DOWN    0x42    /* volume down */
+#define AVRC_ID_MUTE        0x43    /* mute */
+#define AVRC_ID_PLAY        0x44    /* play */
+#define AVRC_ID_STOP        0x45    /* stop */
+#define AVRC_ID_PAUSE       0x46    /* pause */
+#define AVRC_ID_RECORD      0x47    /* record */
+#define AVRC_ID_REWIND      0x48    /* rewind */
+#define AVRC_ID_FAST_FOR    0x49    /* fast forward */
+#define AVRC_ID_EJECT       0x4A    /* eject */
+#define AVRC_ID_FORWARD     0x4B    /* forward */
+#define AVRC_ID_BACKWARD    0x4C    /* backward */
+#define AVRC_ID_ANGLE       0x50    /* angle */
+#define AVRC_ID_SUBPICT     0x51    /* subpicture */
+#define AVRC_ID_F1          0x71    /* F1 */
+#define AVRC_ID_F2          0x72    /* F2 */
+#define AVRC_ID_F3          0x73    /* F3 */
+#define AVRC_ID_F4          0x74    /* F4 */
+#define AVRC_ID_F5          0x75    /* F5 */
+#define AVRC_ID_VENDOR      0x7E    /* vendor unique */
+#define AVRC_KEYPRESSED_RELEASE 0x80
+
+/*****************************************************************************
+**  Metadata transfer definitions
+*****************************************************************************/
+
+/* Define the Metadata Packet types
+*/
+#define AVRC_PKT_SINGLE           0
+#define AVRC_PKT_START            1
+#define AVRC_PKT_CONTINUE         2
+#define AVRC_PKT_END              3
+#define AVRC_PKT_TYPE_MASK        3
+
+/* Define the PDUs carried in the vendor dependant data
+*/
+#define AVRC_PDU_GET_CAPABILITIES               0x10
+#define AVRC_PDU_LIST_PLAYER_APP_ATTR           0x11
+#define AVRC_PDU_LIST_PLAYER_APP_VALUES         0x12
+#define AVRC_PDU_GET_CUR_PLAYER_APP_VALUE       0x13
+#define AVRC_PDU_SET_PLAYER_APP_VALUE           0x14
+#define AVRC_PDU_GET_PLAYER_APP_ATTR_TEXT       0x15
+#define AVRC_PDU_GET_PLAYER_APP_VALUE_TEXT      0x16
+#define AVRC_PDU_INFORM_DISPLAY_CHARSET         0x17
+#define AVRC_PDU_INFORM_BATTERY_STAT_OF_CT      0x18
+#define AVRC_PDU_GET_ELEMENT_ATTR               0x20
+#define AVRC_PDU_GET_PLAY_STATUS                0x30
+#define AVRC_PDU_REGISTER_NOTIFICATION          0x31
+#define AVRC_PDU_REQUEST_CONTINUATION_RSP       0x40
+#define AVRC_PDU_ABORT_CONTINUATION_RSP         0x41
+/* added in 1.4 */
+#define AVRC_PDU_SET_ABSOLUTE_VOLUME            0x50
+#define AVRC_PDU_SET_ADDRESSED_PLAYER           0x60
+#define AVRC_PDU_SET_BROWSED_PLAYER             0x70
+#define AVRC_PDU_GET_FOLDER_ITEMS               0x71
+#define AVRC_PDU_CHANGE_PATH                    0x72
+#define AVRC_PDU_GET_ITEM_ATTRIBUTES            0x73
+#define AVRC_PDU_PLAY_ITEM                      0x74
+#define AVRC_PDU_SEARCH                         0x80
+#define AVRC_PDU_ADD_TO_NOW_PLAYING             0x90
+#define AVRC_PDU_GENERAL_REJECT                 0xA0
+
+/* Define the vendor unique id carried in the pass through data
+*/
+#define AVRC_PDU_NEXT_GROUP                     0x00
+#define AVRC_PDU_PREV_GROUP                     0x01
+/* the only pass through vendor unique commands defined by AVRC is the group navigation commands
+ * The len for vendor unique data is 5 */
+#define AVRC_PASS_THRU_GROUP_LEN                5
+
+#define AVRC_PDU_INVALID                        0xff
+/* 6.15.3 error status code for general reject */
+#define AVRC_STS_BAD_CMD        0x00    /* Invalid command, sent if TG received a PDU that it did not understand. */
+#define AVRC_STS_BAD_PARAM      0x01    /* Invalid parameter, sent if the TG received a PDU with a parameter ID that it did not understand. Sent if there is only one parameter ID in the PDU. */
+#define AVRC_STS_NOT_FOUND      0x02    /* Specified parameter not found., sent if the parameter ID is understood, but content is wrong or corrupted. */
+#define AVRC_STS_INTERNAL_ERR   0x03    /* Internal Error, sent if there are error conditions not covered by a more specific error code. */
+#define AVRC_STS_NO_ERROR       0x04    /* Operation completed without error.  This is the status that should be returned if the operation was successful. */
+#define AVRC_STS_UID_CHANGED    0x05    /* UID Changed - The UIDs on the device have changed */
+/* #define AVRC_STS_GEN_ERROR      0x06    Unknown Error - this is changed to "reserved" */
+#define AVRC_STS_BAD_DIR        0x07    /* Invalid Direction - The Direction parameter is invalid - Change Path*/
+#define AVRC_STS_NOT_DIR        0x08    /* Not a Directory - The UID provided does not refer to a folder item  Change Path*/
+#define AVRC_STS_NOT_EXIST      0x09    /* Does Not Exist - The UID provided does not refer to any item    Change Path, PlayItem, AddToNowPlaying, GetItemAttributes*/
+#define AVRC_STS_BAD_SCOPE      0x0a    /* Invalid Scope - The scope parameter is invalid  GetFolderItems, PlayItem, AddToNowPlayer, GetItemAttributes, */
+#define AVRC_STS_BAD_RANGE      0x0b    /* Range Out of Bounds - The start of range provided is not valid  GetFolderItems*/
+#define AVRC_STS_UID_IS_DIR     0x0c    /* UID is a Directory - The UID provided refers to a directory, which cannot be handled by this media player   PlayItem, AddToNowPlaying */
+#define AVRC_STS_IN_USE         0x0d    /* Media in Use - The media is not able to be used for this operation at this time PlayItem, AddToNowPlaying */
+#define AVRC_STS_NOW_LIST_FULL  0x0e    /* Now Playing List Full - No more items can be added to the Now Playing List  AddToNowPlaying*/
+#define AVRC_STS_SEARCH_NOT_SUP 0x0f    /* Search Not Supported - The Browsed Media Player does not support search Search */
+#define AVRC_STS_SEARCH_BUSY    0x10    /* Search in Progress - A search operation is already in progress  Search*/
+#define AVRC_STS_BAD_PLAYER_ID  0x11    /* Invalid Player Id - The specified Player Id does not refer to a valid player    SetAddressedPlayer, SetBrowsedPlayer*/
+#define AVRC_STS_PLAYER_N_BR    0x12    /* Player Not Browsable - The Player Id supplied refers to a Media Player which does not support browsing. SetBrowsedPlayer */
+#define AVRC_STS_PLAYER_N_ADDR  0x13    /* Player Not Addressed.  The Player Id supplied refers to a player which is not currently addressed, and the command is not able to be performed if the player is not set as addressed.   Search, SetBrowsedPlayer*/
+#define AVRC_STS_BAD_SEARCH_RES 0x14    /* No valid Search Results - The Search result list does not contain valid entries, e.g. after being invalidated due to change of browsed player   GetFolderItems */
+#define AVRC_STS_NO_AVAL_PLAYER 0x15    /* No available players ALL */
+#define AVRC_STS_ADDR_PLAYER_CHG 0x16   /* Addressed Player Changed - Register Notification */
+typedef UINT8 tAVRC_STS;
+
+
+/* Define the Capability IDs
+*/
+#define AVRC_CAP_COMPANY_ID                     0x02
+#define AVRC_CAP_EVENTS_SUPPORTED               0x03
+#define AVRC_COMPANY_ID_LEN                     3
+#define AVRC_CAPABILITY_OFFSET                  2
+
+/* Define the Player Application Settings IDs
+*/
+#define AVRC_PLAYER_SETTING_EQUALIZER           0x01
+#define AVRC_PLAYER_SETTING_REPEAT              0x02
+#define AVRC_PLAYER_SETTING_SHUFFLE             0x03
+#define AVRC_PLAYER_SETTING_SCAN                0x04
+#define AVRC_PLAYER_SETTING_LOW_MENU_EXT        0x80
+#define AVRC_PLAYER_SETTING_HIGH_MENU_EXT       0xff
+
+/* Define the possible values of the Player Application Settings
+*/
+#define AVRC_PLAYER_VAL_OFF                     0x01
+#define AVRC_PLAYER_VAL_ON                      0x02
+#define AVRC_PLAYER_VAL_SINGLE_REPEAT           0x02
+#define AVRC_PLAYER_VAL_ALL_REPEAT              0x03
+#define AVRC_PLAYER_VAL_GROUP_REPEAT            0x04
+#define AVRC_PLAYER_VAL_ALL_SHUFFLE             0x02
+#define AVRC_PLAYER_VAL_GROUP_SHUFFLE           0x03
+#define AVRC_PLAYER_VAL_ALL_SCAN                0x02
+#define AVRC_PLAYER_VAL_GROUP_SCAN              0x03
+
+/* Define the possible values of Battery Status PDU
+*/
+#define AVRC_BATTERY_STATUS_NORMAL              0x00
+#define AVRC_BATTERY_STATUS_WARNING             0x01
+#define AVRC_BATTERY_STATUS_CRITICAL            0x02
+#define AVRC_BATTERY_STATUS_EXTERNAL            0x03
+#define AVRC_BATTERY_STATUS_FULL_CHARGE         0x04
+typedef UINT8 tAVRC_BATTERY_STATUS;
+
+/* Define character set */
+#define AVRC_CHAR_SET_SIZE                      2
+
+/* Define the Media Attribute IDs
+*/
+#define AVRC_MEDIA_ATTR_ID_TITLE                 0x00000001
+#define AVRC_MEDIA_ATTR_ID_ARTIST                0x00000002
+#define AVRC_MEDIA_ATTR_ID_ALBUM                 0x00000003
+#define AVRC_MEDIA_ATTR_ID_TRACK_NUM             0x00000004
+#define AVRC_MEDIA_ATTR_ID_NUM_TRACKS            0x00000005
+#define AVRC_MEDIA_ATTR_ID_GENRE                 0x00000006
+#define AVRC_MEDIA_ATTR_ID_PLAYING_TIME          0x00000007        /* in miliseconds */
+#define AVRC_MAX_NUM_MEDIA_ATTR_ID               7
+
+/* Define the possible values of play state
+*/
+#define AVRC_PLAYSTATE_RESP_MSG_SIZE            9
+#define AVRC_PLAYSTATE_STOPPED                  0x00    /* Stopped */
+#define AVRC_PLAYSTATE_PLAYING                  0x01    /* Playing */
+#define AVRC_PLAYSTATE_PAUSED                   0x02    /* Paused  */
+#define AVRC_PLAYSTATE_FWD_SEEK                 0x03    /* Fwd Seek*/
+#define AVRC_PLAYSTATE_REV_SEEK                 0x04    /* Rev Seek*/
+#define AVRC_PLAYSTATE_ERROR                    0xFF    /* Error   */
+typedef UINT8 tAVRC_PLAYSTATE;
+
+/* Define the events that can be registered for notifications
+*/
+#define AVRC_EVT_PLAY_STATUS_CHANGE             0x01
+#define AVRC_EVT_TRACK_CHANGE                   0x02
+#define AVRC_EVT_TRACK_REACHED_END              0x03
+#define AVRC_EVT_TRACK_REACHED_START            0x04
+#define AVRC_EVT_PLAY_POS_CHANGED               0x05
+#define AVRC_EVT_BATTERY_STATUS_CHANGE          0x06
+#define AVRC_EVT_SYSTEM_STATUS_CHANGE           0x07
+#define AVRC_EVT_APP_SETTING_CHANGE             0x08
+/* added in AVRCP 1.4 */
+#define AVRC_EVT_NOW_PLAYING_CHANGE             0x09
+#define AVRC_EVT_AVAL_PLAYERS_CHANGE            0x0a
+#define AVRC_EVT_ADDR_PLAYER_CHANGE             0x0b
+#define AVRC_EVT_UIDS_CHANGE                    0x0c
+#define AVRC_EVT_VOLUME_CHANGE                  0x0d
+
+/* the number of events that can be registered for notifications */
+#define AVRC_NUM_NOTIF_EVENTS                   0x0d
+
+#define AVRC_EVT_MSG_LEN_1                      0x01
+#define AVRC_EVT_MSG_LEN_2                      0x02
+#define AVRC_EVT_MSG_LEN_5                      0x05
+#define AVRC_EVT_MSG_LEN_9                      0x09
+
+#define AVRC_MAX_VOLUME                         0x7F
+
+/* Define the possible values of system status
+*/
+#define AVRC_SYSTEMSTATE_PWR_ON                 0x00
+#define AVRC_SYSTEMSTATE_PWR_OFF                0x01
+#define AVRC_SYSTEMSTATE_PWR_UNPLUGGED          0x02
+typedef UINT8 tAVRC_SYSTEMSTATE;
+
+/* the frequently used character set ids */
+#define AVRC_CHARSET_ID_ASCII                  ((UINT16) 0x0003) /* ASCII */
+#define AVRC_CHARSET_ID_UTF8                   ((UINT16) 0x006a) /* UTF-8 */
+#define AVRC_CHARSET_ID_UTF16                  ((UINT16) 0x03f7) /* 1015 */
+#define AVRC_CHARSET_ID_UTF32                  ((UINT16) 0x03f9) /* 1017 */
+
+/*****************************************************************************
+**  Advanced Control
+*****************************************************************************/
+#define AVRC_ITEM_PLAYER            0x01
+#define AVRC_ITEM_FOLDER            0x02
+#define AVRC_ITEM_MEDIA             0x03
+
+#define AVRC_SCOPE_PLAYER_LIST      0x00  /* Media Player Item - Contains all available media players */
+#define AVRC_SCOPE_FILE_SYSTEM      0x01  /* Folder Item, Media Element Item
+                                             - The virtual filesystem containing the media content of the browsed player */
+#define AVRC_SCOPE_SEARCH           0x02  /* Media Element Item  The results of a search operation on the browsed player */
+#define AVRC_SCOPE_NOW_PLAYING      0x03  /* Media Element Item  The Now Playing list (or queue) of the addressed player */
+
+#define AVRC_FOLDER_ITEM_COUNT_NONE 0xFF
+
+/* folder type */
+#define AVRC_FOLDER_TYPE_MIXED      0x00
+#define AVRC_FOLDER_TYPE_TITLES     0x01
+#define AVRC_FOLDER_TYPE_ALNUMS     0x02
+#define AVRC_FOLDER_TYPE_ARTISTS    0x03
+#define AVRC_FOLDER_TYPE_GENRES     0x04
+#define AVRC_FOLDER_TYPE_PLAYLISTS  0x05
+#define AVRC_FOLDER_TYPE_YEARS      0x06
+
+/* major player type */
+#define AVRC_MJ_TYPE_AUDIO          0x01  /* Audio */
+#define AVRC_MJ_TYPE_VIDEO          0x02  /* Video */
+#define AVRC_MJ_TYPE_BC_AUDIO       0x04  /* Broadcasting Audio */
+#define AVRC_MJ_TYPE_BC_VIDEO       0x08  /* Broadcasting Video */
+#define AVRC_MJ_TYPE_INVALID        0xF0
+
+/* player sub type */
+#define AVRC_SUB_TYPE_NONE          0x00
+#define AVRC_SUB_TYPE_AUDIO_BOOK    0x01  /* Audio Book */
+#define AVRC_SUB_TYPE_PODCAST       0x02  /* Podcast */
+#define AVRC_SUB_TYPE_INVALID       0xFC
+
+/* media item - media type */
+#define AVRC_MEDIA_TYPE_AUDIO       0x00
+#define AVRC_MEDIA_TYPE_VIDEO       0x01
+
+#define AVRC_DIR_UP                 0x00  /* Folder Up */
+#define AVRC_DIR_DOWN               0x01  /* Folder Down */
+
+#define AVRC_UID_SIZE               8
+typedef UINT8 tAVRC_UID[AVRC_UID_SIZE];
+
+/*****************************************************************************
+**  player attribute - supported features
+*****************************************************************************/
+#define AVRC_PF_SELECT_BIT_NO           0
+#define AVRC_PF_SELECT_MASK             0x01
+#define AVRC_PF_SELECT_OFF              0
+#define AVRC_PF_SELECT_SUPPORTED(x)     ((x)[AVRC_PF_SELECT_OFF] & AVRC_PF_SELECT_MASK)
+
+#define AVRC_PF_UP_BIT_NO               1
+#define AVRC_PF_UP_MASK                 0x02
+#define AVRC_PF_UP_OFF                  0
+#define AVRC_PF_UP_SUPPORTED(x)         ((x)[AVRC_PF_UP_OFF] & AVRC_PF_UP_MASK)
+
+#define AVRC_PF_DOWN_BIT_NO             2
+#define AVRC_PF_DOWN_MASK               0x04
+#define AVRC_PF_DOWN_OFF                0
+#define AVRC_PF_DOWN_SUPPORTED(x)       ((x)[AVRC_PF_DOWN_OFF] & AVRC_PF_DOWN_MASK)
+
+#define AVRC_PF_LEFT_BIT_NO             3
+#define AVRC_PF_LEFT_MASK               0x08
+#define AVRC_PF_LEFT_OFF                0
+#define AVRC_PF_LEFT_SUPPORTED(x)       ((x)[AVRC_PF_LEFT_OFF] & AVRC_PF_LEFT_MASK)
+
+#define AVRC_PF_RIGHT_BIT_NO            4
+#define AVRC_PF_RIGHT_MASK              0x10
+#define AVRC_PF_RIGHT_OFF               0
+#define AVRC_PF_RIGHT_SUPPORTED(x)      ((x)[AVRC_PF_RIGHT_OFF] & AVRC_PF_RIGHT_MASK)
+
+#define AVRC_PF_RIGHTUP_BIT_NO          5
+#define AVRC_PF_RIGHTUP_MASK            0x20
+#define AVRC_PF_RIGHTUP_OFF             0
+#define AVRC_PF_RIGHTUP_SUPPORTED(x)    ((x)[AVRC_PF_RIGHTUP_OFF] & AVRC_PF_RIGHTUP_MASK)
+
+#define AVRC_PF_RIGHTDOWN_BIT_NO        6
+#define AVRC_PF_RIGHTDOWN_MASK          0x40
+#define AVRC_PF_RIGHTDOWN_OFF           0
+#define AVRC_PF_RIGHTDOWN_SUPPORTED(x)  ((x)[AVRC_PF_RIGHTDOWN_OFF] & AVRC_PF_RIGHTDOWN_MASK)
+
+#define AVRC_PF_LEFTUP_BIT_NO           7
+#define AVRC_PF_LEFTUP_MASK             0x80
+#define AVRC_PF_LEFTUP_OFF              0
+#define AVRC_PF_LEFTUP_SUPPORTED(x)     ((x)[AVRC_PF_LEFTUP_OFF] & AVRC_PF_LEFTUP_MASK)
+
+#define AVRC_PF_LEFTDOWN_BIT_NO         8
+#define AVRC_PF_LEFTDOWN_MASK           0x01
+#define AVRC_PF_LEFTDOWN_OFF            1
+#define AVRC_PF_LEFTDOWN_SUPPORTED(x)   ((x)[AVRC_PF_LEFTDOWN_OFF] & AVRC_PF_LEFTDOWN_MASK)
+
+#define AVRC_PF_ROOT_MENU_BIT_NO        9
+#define AVRC_PF_ROOT_MENU_MASK          0x02
+#define AVRC_PF_ROOT_MENU_OFF           1
+#define AVRC_PF_ROOT_MENU_SUPPORTED(x)  ((x)[AVRC_PF_ROOT_MENU_OFF] & AVRC_PF_ROOT_MENU_MASK)
+
+#define AVRC_PF_SETUP_MENU_BIT_NO       10
+#define AVRC_PF_SETUP_MENU_MASK         0x04
+#define AVRC_PF_SETUP_MENU_OFF          1
+#define AVRC_PF_SETUP_MENU_SUPPORTED(x) ((x)[AVRC_PF_SETUP_MENU_OFF] & AVRC_PF_SETUP_MENU_MASK)
+
+#define AVRC_PF_CONTENTS_MENU_BIT_NO    11
+#define AVRC_PF_CONTENTS_MENU_MASK      0x08
+#define AVRC_PF_CONTENTS_MENU_OFF       1
+#define AVRC_PF_CONTENTS_MENU_SUPPORTED(x)  ((x)[AVRC_PF_CONTENTS_MENU_OFF] & AVRC_PF_CONTENTS_MENU_MASK)
+
+#define AVRC_PF_FAVORITE_MENU_BIT_NO    12
+#define AVRC_PF_FAVORITE_MENU_MASK      0x10
+#define AVRC_PF_FAVORITE_MENU_OFF       1
+#define AVRC_PF_FAVORITE_MENU_SUPPORTED(x)  ((x)[AVRC_PF_FAVORITE_MENU_OFF] & AVRC_PF_FAVORITE_MENU_MASK)
+
+#define AVRC_PF_EXIT_BIT_NO             13
+#define AVRC_PF_EXIT_MASK               0x20
+#define AVRC_PF_EXIT_OFF                1
+#define AVRC_PF_EXIT_SUPPORTED(x)       ((x)[AVRC_PF_EXIT_OFF] & AVRC_PF_EXIT_MASK)
+
+#define AVRC_PF_0_BIT_NO                14
+#define AVRC_PF_0_MASK                  0x40
+#define AVRC_PF_0_OFF                   1
+#define AVRC_PF_0_SUPPORTED(x)          ((x)[AVRC_PF_0_OFF] & AVRC_PF_0_MASK)
+
+#define AVRC_PF_1_BIT_NO                15
+#define AVRC_PF_1_MASK                  0x80
+#define AVRC_PF_1_OFF                   1
+#define AVRC_PF_1_SUPPORTED(x)          ((x)[AVRC_PF_1_OFF] & AVRC_PF_1_MASK)
+
+#define AVRC_PF_2_BIT_NO                16
+#define AVRC_PF_2_MASK                  0x01
+#define AVRC_PF_2_OFF                   2
+#define AVRC_PF_2_SUPPORTED(x)          ((x)[AVRC_PF_2_OFF] & AVRC_PF_2_MASK)
+
+#define AVRC_PF_3_BIT_NO                17
+#define AVRC_PF_3_MASK                  0x02
+#define AVRC_PF_3_OFF                   2
+#define AVRC_PF_3_SUPPORTED(x)          ((x)[AVRC_PF_3_OFF] & AVRC_PF_3_MASK)
+
+#define AVRC_PF_4_BIT_NO                18
+#define AVRC_PF_4_MASK                  0x04
+#define AVRC_PF_4_OFF                   2
+#define AVRC_PF_4_SUPPORTED(x)          ((x)[AVRC_PF_4_OFF] & AVRC_PF_4_MASK)
+
+#define AVRC_PF_5_BIT_NO                19
+#define AVRC_PF_5_MASK                  0x08
+#define AVRC_PF_5_OFF                   2
+#define AVRC_PF_5_SUPPORTED(x)          ((x)[AVRC_PF_5_OFF] & AVRC_PF_5_MASK)
+
+#define AVRC_PF_6_BIT_NO                20
+#define AVRC_PF_6_MASK                  0x10
+#define AVRC_PF_6_OFF                   2
+#define AVRC_PF_6_SUPPORTED(x)          ((x)[AVRC_PF_6_OFF] & AVRC_PF_6_MASK)
+
+#define AVRC_PF_7_BIT_NO                21
+#define AVRC_PF_7_MASK                  0x20
+#define AVRC_PF_7_OFF                   2
+#define AVRC_PF_7_SUPPORTED(x)          ((x)[AVRC_PF_7_OFF] & AVRC_PF_7_MASK)
+
+#define AVRC_PF_8_BIT_NO                22
+#define AVRC_PF_8_MASK                  0x40
+#define AVRC_PF_8_OFF                   2
+#define AVRC_PF_8_SUPPORTED(x)          ((x)[AVRC_PF_8_OFF] & AVRC_PF_8_MASK)
+
+#define AVRC_PF_9_BIT_NO                23
+#define AVRC_PF_9_MASK                  0x80
+#define AVRC_PF_9_OFF                   2
+#define AVRC_PF_9_SUPPORTED(x)          ((x)[AVRC_PF_9_OFF] & AVRC_PF_9_MASK)
+
+#define AVRC_PF_DOT_BIT_NO              24
+#define AVRC_PF_DOT_MASK                0x01
+#define AVRC_PF_DOT_OFF                 3
+#define AVRC_PF_DOT_SUPPORTED(x)        ((x)[AVRC_PF_DOT_OFF] & AVRC_PF_DOT_MASK)
+
+#define AVRC_PF_ENTER_BIT_NO            25
+#define AVRC_PF_ENTER_MASK              0x02
+#define AVRC_PF_ENTER_OFF               3
+#define AVRC_PF_ENTER_SUPPORTED(x)      ((x)[AVRC_PF_ENTER_OFF] & AVRC_PF_ENTER_MASK)
+
+#define AVRC_PF_CLEAR_BIT_NO            26
+#define AVRC_PF_CLEAR_MASK              0x04
+#define AVRC_PF_CLEAR_OFF               3
+#define AVRC_PF_CLEAR_SUPPORTED(x)      ((x)[AVRC_PF_CLEAR_OFF] & AVRC_PF_CLEAR_MASK)
+
+#define AVRC_PF_CHNL_UP_BIT_NO          27
+#define AVRC_PF_CHNL_UP_MASK            0x08
+#define AVRC_PF_CHNL_UP_OFF             3
+#define AVRC_PF_CHNL_UP_SUPPORTED(x)    ((x)[AVRC_PF_CHNL_UP_OFF] & AVRC_PF_CHNL_UP_MASK)
+
+#define AVRC_PF_CHNL_DOWN_BIT_NO        28
+#define AVRC_PF_CHNL_DOWN_MASK          0x10
+#define AVRC_PF_CHNL_DOWN_OFF           3
+#define AVRC_PF_CHNL_DOWN_SUPPORTED(x)  ((x)[AVRC_PF_CHNL_DOWN_OFF] & AVRC_PF_CHNL_DOWN_MASK)
+
+#define AVRC_PF_PREV_CHNL_BIT_NO        29
+#define AVRC_PF_PREV_CHNL_MASK          0x20
+#define AVRC_PF_PREV_CHNL_OFF           3
+#define AVRC_PF_PREV_CHNL_SUPPORTED(x)  ((x)[AVRC_PF_PREV_CHNL_OFF] & AVRC_PF_PREV_CHNL_MASK)
+
+#define AVRC_PF_SOUND_SEL_BIT_NO        30
+#define AVRC_PF_SOUND_SEL_MASK          0x40
+#define AVRC_PF_SOUND_SEL_OFF           3
+#define AVRC_PF_SOUND_SEL_SUPPORTED(x)  ((x)[AVRC_PF_SOUND_SEL_OFF] & AVRC_PF_SOUND_SEL_MASK)
+
+#define AVRC_PF_INPUT_SEL_BIT_NO        31
+#define AVRC_PF_INPUT_SEL_MASK          0x80
+#define AVRC_PF_INPUT_SEL_OFF           3
+#define AVRC_PF_INPUT_SEL_SUPPORTED(x)  ((x)[AVRC_PF_INPUT_SEL_OFF] & AVRC_PF_INPUT_SEL_MASK)
+
+#define AVRC_PF_DISP_INFO_BIT_NO        32
+#define AVRC_PF_DISP_INFO_MASK          0x01
+#define AVRC_PF_DISP_INFO_OFF           4
+#define AVRC_PF_DISP_INFO_SUPPORTED(x)  ((x)[AVRC_PF_DISP_INFO_OFF] & AVRC_PF_DISP_INFO_MASK)
+
+#define AVRC_PF_HELP_BIT_NO             33
+#define AVRC_PF_HELP_MASK               0x02
+#define AVRC_PF_HELP_OFF                4
+#define AVRC_PF_HELP_SUPPORTED(x)       ((x)[AVRC_PF_HELP_OFF] & AVRC_PF_HELP_MASK)
+
+#define AVRC_PF_PAGE_UP_BIT_NO          34
+#define AVRC_PF_PAGE_UP_MASK            0x04
+#define AVRC_PF_PAGE_UP_OFF             4
+#define AVRC_PF_PAGE_UP_SUPPORTED(x)    ((x)[AVRC_PF_PAGE_UP_OFF] & AVRC_PF_PAGE_UP_MASK)
+
+#define AVRC_PF_PAGE_DOWN_BIT_NO        35
+#define AVRC_PF_PAGE_DOWN_MASK          0x08
+#define AVRC_PF_PAGE_DOWN_OFF           4
+#define AVRC_PF_PAGE_DOWN_SUPPORTED(x)  ((x)[AVRC_PF_PAGE_DOWN_OFF] & AVRC_PF_PAGE_DOWN_MASK)
+
+#define AVRC_PF_POWER_BIT_NO            36
+#define AVRC_PF_POWER_MASK              0x10
+#define AVRC_PF_POWER_OFF               4
+#define AVRC_PF_POWER_SUPPORTED(x)      ((x)[AVRC_PF_POWER_OFF] & AVRC_PF_POWER_MASK)
+
+#define AVRC_PF_VOL_UP_BIT_NO           37
+#define AVRC_PF_VOL_UP_MASK             0x20
+#define AVRC_PF_VOL_UP_OFF              4
+#define AVRC_PF_VOL_UP_SUPPORTED(x)     ((x)[AVRC_PF_VOL_UP_OFF] & AVRC_PF_VOL_UP_MASK)
+
+#define AVRC_PF_VOL_DOWN_BIT_NO         38
+#define AVRC_PF_VOL_DOWN_MASK           0x40
+#define AVRC_PF_VOL_DOWN_OFF            4
+#define AVRC_PF_VOL_DOWN_SUPPORTED(x)   ((x)[AVRC_PF_VOL_DOWN_OFF] & AVRC_PF_VOL_DOWN_MASK)
+
+#define AVRC_PF_MUTE_BIT_NO             39
+#define AVRC_PF_MUTE_MASK               0x80
+#define AVRC_PF_MUTE_OFF                4
+#define AVRC_PF_MUTE_SUPPORTED(x)       ((x)[AVRC_PF_MUTE_OFF] & AVRC_PF_MUTE_MASK)
+
+#define AVRC_PF_PLAY_BIT_NO             40
+#define AVRC_PF_PLAY_MASK               0x01
+#define AVRC_PF_PLAY_OFF                5
+#define AVRC_PF_PLAY_SUPPORTED(x)       ((x)[AVRC_PF_PLAY_OFF] & AVRC_PF_PLAY_MASK)
+
+#define AVRC_PF_STOP_BIT_NO             41
+#define AVRC_PF_STOP_MASK               0x02
+#define AVRC_PF_STOP_OFF                5
+#define AVRC_PF_STOP_SUPPORTED(x)       ((x)[AVRC_PF_STOP_OFF] & AVRC_PF_STOP_MASK)
+
+#define AVRC_PF_PAUSE_BIT_NO            42
+#define AVRC_PF_PAUSE_MASK              0x04
+#define AVRC_PF_PAUSE_OFF               5
+#define AVRC_PF_PAUSE_SUPPORTED(x)      ((x)[AVRC_PF_PAUSE_OFF] & AVRC_PF_PAUSE_MASK)
+
+#define AVRC_PF_RECORD_BIT_NO           43
+#define AVRC_PF_RECORD_MASK             0x08
+#define AVRC_PF_RECORD_OFF              5
+#define AVRC_PF_RECORD_SUPPORTED(x)     ((x)[AVRC_PF_RECORD_OFF] & AVRC_PF_RECORD_MASK)
+
+#define AVRC_PF_REWIND_BIT_NO           44
+#define AVRC_PF_REWIND_MASK             0x10
+#define AVRC_PF_REWIND_OFF              5
+#define AVRC_PF_REWIND_SUPPORTED(x)     ((x)[AVRC_PF_REWIND_OFF] & AVRC_PF_REWIND_MASK)
+
+#define AVRC_PF_FAST_FWD_BIT_NO         45
+#define AVRC_PF_FAST_FWD_MASK           0x20
+#define AVRC_PF_FAST_FWD_OFF            5
+#define AVRC_PF_FAST_FWD_SUPPORTED(x)   ((x)[AVRC_PF_FAST_FWD_OFF] & AVRC_PF_FAST_FWD_MASK)
+
+#define AVRC_PF_EJECT_BIT_NO            46
+#define AVRC_PF_EJECT_MASK              0x40
+#define AVRC_PF_EJECT_OFF               5
+#define AVRC_PF_EJECT_SUPPORTED(x)      ((x)[AVRC_PF_EJECT_OFF] & AVRC_PF_EJECT_MASK)
+
+#define AVRC_PF_FORWARD_BIT_NO          47
+#define AVRC_PF_FORWARD_MASK            0x80
+#define AVRC_PF_FORWARD_OFF             5
+#define AVRC_PF_FORWARD_SUPPORTED(x)    ((x)[AVRC_PF_FORWARD_OFF] & AVRC_PF_FORWARD_MASK)
+
+#define AVRC_PF_BACKWARD_BIT_NO         48
+#define AVRC_PF_BACKWARD_MASK           0x01
+#define AVRC_PF_BACKWARD_OFF            6
+#define AVRC_PF_BACKWARD_SUPPORTED(x)   ((x)[AVRC_PF_BACKWARD_OFF] & AVRC_PF_BACKWARD_MASK)
+
+#define AVRC_PF_ANGLE_BIT_NO            49
+#define AVRC_PF_ANGLE_MASK              0x02
+#define AVRC_PF_ANGLE_OFF               6
+#define AVRC_PF_ANGLE_SUPPORTED(x)      ((x)[AVRC_PF_ANGLE_OFF] & AVRC_PF_ANGLE_MASK)
+
+#define AVRC_PF_SUBPICTURE_BIT_NO       50
+#define AVRC_PF_SUBPICTURE_MASK         0x04
+#define AVRC_PF_SUBPICTURE_OFF          6
+#define AVRC_PF_SUBPICTURE_SUPPORTED(x) ((x)[AVRC_PF_SUBPICTURE_OFF] & AVRC_PF_SUBPICTURE_MASK)
+
+#define AVRC_PF_F1_BIT_NO               51
+#define AVRC_PF_F1_MASK                 0x08
+#define AVRC_PF_F1_OFF                  6
+#define AVRC_PF_F1_SUPPORTED(x)         ((x)[AVRC_PF_F1_OFF] & AVRC_PF_F1_MASK)
+
+#define AVRC_PF_F2_BIT_NO               52
+#define AVRC_PF_F2_MASK                 0x10
+#define AVRC_PF_F2_OFF                  6
+#define AVRC_PF_F2_SUPPORTED(x)         ((x)[AVRC_PF_F2_OFF] & AVRC_PF_F2_MASK)
+
+#define AVRC_PF_F3_BIT_NO               53
+#define AVRC_PF_F3_MASK                 0x20
+#define AVRC_PF_F3_OFF                  6
+#define AVRC_PF_F3_SUPPORTED(x)         ((x)[AVRC_PF_F3_OFF] & AVRC_PF_F3_MASK)
+
+#define AVRC_PF_F4_BIT_NO               54
+#define AVRC_PF_F4_MASK                 0x40
+#define AVRC_PF_F4_OFF                  6
+#define AVRC_PF_F4_SUPPORTED(x)         ((x)[AVRC_PF_F4_OFF] & AVRC_PF_F4_MASK)
+
+#define AVRC_PF_F5_BIT_NO               55
+#define AVRC_PF_F5_MASK                 0x80
+#define AVRC_PF_F5_OFF                  6
+#define AVRC_PF_F5_SUPPORTED(x)         ((x)[AVRC_PF_F5_OFF] & AVRC_PF_F5_MASK)
+
+/* Vendor unique. This PASSTHROUGH command is supported. */
+#define AVRC_PF_VENDOR_BIT_NO           56
+#define AVRC_PF_VENDOR_MASK             0x01
+#define AVRC_PF_VENDOR_OFF              7
+#define AVRC_PF_VENDOR_SUPPORTED(x)     ((x)[AVRC_PF_VENDOR_OFF] & AVRC_PF_VENDOR_MASK)
+
+/* Basic Group Navigation.  This overrules the SDP entry as it is set per player.7 */
+#define AVRC_PF_GROUP_NAVI_BIT_NO       57
+#define AVRC_PF_GROUP_NAVI_MASK         0x02
+#define AVRC_PF_GROUP_NAVI_OFF          7
+#define AVRC_PF_GROUP_NAVI_SUPPORTED(x) ((x)[AVRC_PF_GROUP_NAVI_OFF] & AVRC_PF_GROUP_NAVI_MASK)
+
+/* Advanced Control Player.  This bit is set if the player supports at least AVRCP 1.4. */
+#define AVRC_PF_ADV_CTRL_BIT_NO         58
+#define AVRC_PF_ADV_CTRL_MASK           0x04
+#define AVRC_PF_ADV_CTRL_OFF            7
+#define AVRC_PF_ADV_CTRL_SUPPORTED(x)   ((x)[AVRC_PF_ADV_CTRL_OFF] & AVRC_PF_ADV_CTRL_MASK)
+
+/* Browsing.  This bit is set if the player supports browsing. */
+#define AVRC_PF_BROWSE_BIT_NO           59
+#define AVRC_PF_BROWSE_MASK             0x08
+#define AVRC_PF_BROWSE_OFF              7
+#define AVRC_PF_BROWSE_SUPPORTED(x)     ((x)[AVRC_PF_BROWSE_OFF] & AVRC_PF_BROWSE_MASK)
+
+/* Searching. This bit is set if the player supports searching. */
+#define AVRC_PF_SEARCH_BIT_NO           60
+#define AVRC_PF_SEARCH_MASK             0x10
+#define AVRC_PF_SEARCH_OFF              7
+#define AVRC_PF_SEARCH_SUPPORTED(x)     ((x)[AVRC_PF_SEARCH_OFF] & AVRC_PF_SEARCH_MASK)
+
+/* AddToNowPlaying.  This bit is set if the player supports the AddToNowPlaying command. */
+#define AVRC_PF_ADD2NOWPLAY_BIT_NO      61
+#define AVRC_PF_ADD2NOWPLAY_MASK        0x20
+#define AVRC_PF_ADD2NOWPLAY_OFF         7
+#define AVRC_PF_ADD2NOWPLAY_SUPPORTED(x) ((x)[AVRC_PF_ADD2NOWPLAY_OFF] & AVRC_PF_ADD2NOWPLAY_MASK)
+
+/* UIDs unique in player browse tree.  This bit is set if the player is able to maintain unique UIDs across the player browse tree. */
+#define AVRC_PF_UID_UNIQUE_BIT_NO       62
+#define AVRC_PF_UID_UNIQUE_MASK         0x40
+#define AVRC_PF_UID_UNIQUE_OFF          7
+#define AVRC_PF_UID_UNIQUE_SUPPORTED(x) ((x)[AVRC_PF_UID_UNIQUE_OFF] & AVRC_PF_UID_UNIQUE_MASK)
+
+/* OnlyBrowsableWhenAddressed.  This bit is set if the player is only able to be browsed when it is set as the Addressed Player. */
+#define AVRC_PF_BR_WH_ADDR_BIT_NO       63
+#define AVRC_PF_BR_WH_ADDR_MASK         0x80
+#define AVRC_PF_BR_WH_ADDR_OFF          7
+#define AVRC_PF_BR_WH_ADDR_SUPPORTED(x) ((x)[AVRC_PF_BR_WH_ADDR_OFF] & AVRC_PF_BR_WH_ADDR_MASK)
+
+/* OnlySearchableWhenAddressed.  This bit is set if the player is only able to be searched when it is set as the Addressed player. */
+#define AVRC_PF_SEARCH_WH_ADDR_BIT_NO   64
+#define AVRC_PF_SEARCH_WH_ADDR_MASK     0x01
+#define AVRC_PF_SEARCH_WH_ADDR_OFF      8
+#define AVRC_PF_SEARCH_WH_ADDR_SUPPORTED(x) ((x)[AVRC_PF_SEARCH_WH_ADDR_OFF] & AVRC_PF_SEARCH_WH_ADDR_MASK)
+
+/* NowPlaying.  This bit is set if the player supports the NowPlaying folder.  Note that for all players that support browsing this bit shall be set */
+#define AVRC_PF_NOW_PLAY_BIT_NO         65
+#define AVRC_PF_NOW_PLAY_MASK           0x02
+#define AVRC_PF_NOW_PLAY_OFF            8
+#define AVRC_PF_NOW_PLAY_SUPPORTED(x)   ((x)[AVRC_PF_NOW_PLAY_OFF] & AVRC_PF_NOW_PLAY_MASK)
+
+/* UIDPersistency.  This bit is set if the Player is able to persist UID values between AVRCP Browse Reconnect */
+#define AVRC_PF_UID_PERSIST_BIT_NO      66
+#define AVRC_PF_UID_PERSIST_MASK        0x04
+#define AVRC_PF_UID_PERSIST_OFF         8
+#define AVRC_PF_UID_PERSIST_SUPPORTED(x) ((x)[AVRC_PF_UID_PERSIST_OFF] & AVRC_PF_UID_PERSIST_MASK)
+
+/*****************************************************************************
+**  data type definitions
+*****************************************************************************/
+
+/*
+This structure contains the header parameters of an AV/C message.
+*/
+typedef struct
+{
+    UINT8   ctype;          /* Command type.  */
+    UINT8   subunit_type;   /* Subunit type. */
+    UINT8   subunit_id;     /* Subunit ID.  This value is typically ignored in AVRCP,
+                             * except for VENDOR DEPENDENT messages when the value is
+                             * vendor-dependent.  Value range is 0-7. */
+    UINT8   opcode;         /* Op Code (passthrough, vendor, etc) */
+} tAVRC_HDR;
+
+/* This structure contains a UNIT INFO message. */
+typedef struct
+{
+    tAVRC_HDR   hdr;        /* Message header. */
+    UINT32      company_id; /* Company identifier. */
+    UINT8       unit_type;  /* Unit type.  Uses the same values as subunit type. */
+    UINT8       unit;       /* This value is vendor dependent and typically zero.  */
+} tAVRC_MSG_UNIT;
+
+/* This structure contains a SUBUNIT INFO message. */
+typedef struct
+{
+    tAVRC_HDR   hdr;        /* Message header. */
+    UINT8       subunit_type[AVRC_SUB_TYPE_LEN];
+                            /* Array containing subunit type values.  */
+    BOOLEAN     panel;      /* TRUE if the panel subunit type is in the
+                             * subunit_type array, FALSE otherwise. */
+    UINT8       page;       /* Specifies which part of the subunit type table is
+                             * returned.  For AVRCP it is typically zero.
+                             * Value range is 0-7. */
+} tAVRC_MSG_SUB;
+
+/* This structure contains a VENDOR DEPENDENT message. */
+typedef struct
+{
+    tAVRC_HDR   hdr;        /* Message header. */
+    UINT32      company_id; /* Company identifier. */
+    UINT8      *p_vendor_data;/* Pointer to vendor dependent data. */
+    UINT16      vendor_len; /* Length in bytes of vendor dependent data. */
+} tAVRC_MSG_VENDOR;
+
+/* PASS THROUGH message structure */
+typedef struct
+{
+    tAVRC_HDR   hdr;        /* hdr.ctype Unused.
+                             * hdr.subunit_type Unused.
+                             * hdr.subunit_id Unused. */
+    UINT8       op_id;      /* Operation ID.  */
+    UINT8       state;      /* Keypress state.  */
+    UINT8      *p_pass_data;/* Pointer to data.  This parameter is only valid
+                             * when the op_id is AVRC_ID_VENDOR.*/
+    UINT8       pass_len;   /* Length in bytes of data. This parameter is only
+                             * valid when the op_id is AVRC_ID_VENDOR.*/
+} tAVRC_MSG_PASS;
+
+/* Command/Response indicator. */
+#define AVRC_CMD            AVCT_CMD    /* Command message */
+#define AVRC_RSP            AVCT_RSP    /* Response message */
+
+/* Browsing channel message structure */
+typedef struct
+{
+    tAVRC_HDR   hdr;            /* hdr.ctype AVRC_CMD or AVRC_RSP.
+                                 * hdr.subunit_type Unused.
+                                 * hdr.subunit_id Unused. */
+    UINT8      *p_browse_data;  /* Pointer to data.  */
+    UINT16      browse_len;     /* Length in bytes of data. */
+    BT_HDR     *p_browse_pkt;   /* The GKI buffer received. Set to NULL, if the callback function wants to keep the buffer */
+} tAVRC_MSG_BROWSE;
+
+/* This is a union of all message type structures. */
+typedef union
+{
+    tAVRC_HDR           hdr;    /* Message header. */
+    tAVRC_MSG_UNIT      unit;   /* UNIT INFO message. */
+    tAVRC_MSG_SUB       sub;    /* SUBUNIT INFO message. */
+    tAVRC_MSG_VENDOR    vendor; /* VENDOR DEPENDENT message. */
+    tAVRC_MSG_PASS      pass;   /* PASS THROUGH message. */
+    tAVRC_MSG_BROWSE    browse; /* messages thru browsing channel */
+} tAVRC_MSG;
+
+/* macros */
+#define AVRC_IS_VALID_CAP_ID(a)           (((a == AVRC_CAP_COMPANY_ID) || (a == AVRC_CAP_EVENTS_SUPPORTED)) ? TRUE : FALSE)
+
+#define AVRC_IS_VALID_EVENT_ID(a)           (((a >= AVRC_EVT_PLAY_STATUS_CHANGE) && \
+                                              (a <= AVRC_EVT_APP_SETTING_CHANGE)) ? TRUE : FALSE)
+
+#define AVRC_IS_VALID_ATTRIBUTE(a)          (((((a > 0) && a <= AVRC_PLAYER_SETTING_SCAN)) || \
+                                               ((a >= AVRC_PLAYER_SETTING_LOW_MENU_EXT) && \
+                                                (a <= AVRC_PLAYER_SETTING_HIGH_MENU_EXT))) ? TRUE : FALSE)
+
+
+#define AVRC_IS_VALID_MEDIA_ATTRIBUTE(a)    ((a >= AVRC_MEDIA_ATTR_ID_TITLE) && \
+                                             (a <= AVRC_MEDIA_ATTR_ID_PLAYING_TIME) ? TRUE : FALSE)
+
+#define AVRC_IS_VALID_BATTERY_STATUS(a)    ((a <= AVRC_BATTERY_STATUS_FULL_CHARGE) ? TRUE : FALSE)
+
+#define AVRC_IS_VALID_SYSTEM_STATUS(a)    ((a <= AVRC_SYSTEMSTATE_PWR_UNPLUGGED) ? TRUE : FALSE)
+
+#define AVRC_IS_VALID_GROUP(a)    ((a <= AVRC_PDU_PREV_GROUP) ? TRUE : FALSE)
+
+/* Company ID is 24-bit integer We can not use the macros in bt_types.h */
+#define AVRC_CO_ID_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); }
+#define AVRC_BE_STREAM_TO_CO_ID(u32, p) {u32 = (((UINT32)(*((p) + 2))) + (((UINT32)(*((p) + 1))) << 8) + (((UINT32)(*(p))) << 16)); (p) += 3;}
+
+/*****************************************************************************
+**  data type definitions
+*****************************************************************************/
+#define AVRC_MAX_APP_ATTR_SIZE      16
+#define AVRC_MAX_CHARSET_SIZE       16
+#define AVRC_MAX_ELEM_ATTR_SIZE     8
+
+
+/*****************************************************************************
+**  Metadata transfer Building/Parsing definitions
+*****************************************************************************/
+
+typedef struct {
+    UINT16              charset_id;
+    UINT16              str_len;
+    UINT8               *p_str;
+} tAVRC_FULL_NAME;
+
+typedef struct {
+    UINT16              str_len;
+    UINT8               *p_str;
+} tAVRC_NAME;
+
+
+#ifndef AVRC_CAP_MAX_NUM_COMP_ID
+#define AVRC_CAP_MAX_NUM_COMP_ID    4
+#endif
+
+#ifndef AVRC_CAP_MAX_NUM_EVT_ID
+#define AVRC_CAP_MAX_NUM_EVT_ID     16
+#endif
+
+typedef union
+{
+    UINT32  company_id[AVRC_CAP_MAX_NUM_COMP_ID];
+    UINT8   event_id[AVRC_CAP_MAX_NUM_EVT_ID];
+} tAVRC_CAPS_PARAM;
+
+typedef struct
+{
+    UINT8   attr_id;
+    UINT8   attr_val;
+} tAVRC_APP_SETTING;
+
+typedef struct
+{
+    UINT8   attr_id;
+    UINT16  charset_id;
+    UINT8   str_len;
+    UINT8   *p_str;
+} tAVRC_APP_SETTING_TEXT;
+
+typedef UINT8 tAVRC_FEATURE_MASK[AVRC_FEATURE_MASK_SIZE];
+
+typedef struct
+{
+    UINT16              player_id;      /* A unique identifier for this media player.*/
+    UINT8               major_type;     /* Use AVRC_MJ_TYPE_AUDIO, AVRC_MJ_TYPE_VIDEO, AVRC_MJ_TYPE_BC_AUDIO, or AVRC_MJ_TYPE_BC_VIDEO.*/
+    UINT32              sub_type;       /* Use AVRC_SUB_TYPE_NONE, AVRC_SUB_TYPE_AUDIO_BOOK, or AVRC_SUB_TYPE_PODCAST*/
+    UINT8               play_status;    /* Use AVRC_PLAYSTATE_STOPPED, AVRC_PLAYSTATE_PLAYING, AVRC_PLAYSTATE_PAUSED, AVRC_PLAYSTATE_FWD_SEEK,
+                                            AVRC_PLAYSTATE_REV_SEEK, or AVRC_PLAYSTATE_ERROR*/
+    tAVRC_FEATURE_MASK  features;       /* Supported feature bit mask*/
+    tAVRC_FULL_NAME     name;           /* The player name, name length and character set id.*/
+} tAVRC_ITEM_PLAYER;
+
+typedef struct
+{
+    tAVRC_UID           uid;            /* The uid of this folder */
+    UINT8               type;           /* Use AVRC_FOLDER_TYPE_MIXED, AVRC_FOLDER_TYPE_TITLES,
+                                           AVRC_FOLDER_TYPE_ALNUMS, AVRC_FOLDER_TYPE_ARTISTS, AVRC_FOLDER_TYPE_GENRES,
+                                           AVRC_FOLDER_TYPE_PLAYLISTS, or AVRC_FOLDER_TYPE_YEARS.*/
+    BOOLEAN             playable;       /* TRUE, if the folder can be played. */
+    tAVRC_FULL_NAME     name;           /* The folder name, name length and character set id. */
+} tAVRC_ITEM_FOLDER;
+
+typedef struct
+{
+    UINT32              attr_id;        /* Use AVRC_MEDIA_ATTR_ID_TITLE, AVRC_MEDIA_ATTR_ID_ARTIST, AVRC_MEDIA_ATTR_ID_ALBUM,
+                                           AVRC_MEDIA_ATTR_ID_TRACK_NUM, AVRC_MEDIA_ATTR_ID_NUM_TRACKS,
+                                           AVRC_MEDIA_ATTR_ID_GENRE, AVRC_MEDIA_ATTR_ID_PLAYING_TIME */
+    tAVRC_FULL_NAME     name;           /* The attribute value, value length and character set id. */
+} tAVRC_ATTR_ENTRY;
+
+typedef struct
+{
+    tAVRC_UID           uid;            /* The uid of this media element item */
+    UINT8               type;           /* Use AVRC_MEDIA_TYPE_AUDIO or AVRC_MEDIA_TYPE_VIDEO. */
+    tAVRC_FULL_NAME     name;           /* The media name, name length and character set id. */
+    UINT8               attr_count;     /* The number of attributes in p_attr_list */
+    tAVRC_ATTR_ENTRY*   p_attr_list;    /* Attribute entry list. */
+} tAVRC_ITEM_MEDIA;
+
+typedef struct
+{
+    UINT8                   item_type;  /* AVRC_ITEM_PLAYER, AVRC_ITEM_FOLDER, or AVRC_ITEM_MEDIA */
+    union
+    {
+        tAVRC_ITEM_PLAYER   player;     /* The properties of a media player item.*/
+        tAVRC_ITEM_FOLDER   folder;     /* The properties of a folder item.*/
+        tAVRC_ITEM_MEDIA    media;      /* The properties of a media item.*/
+    } u;
+} tAVRC_ITEM;
+
+/* GetCapability */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       capability_id;
+} tAVRC_GET_CAPS_CMD;
+
+/* ListPlayerAppValues */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       attr_id;
+} tAVRC_LIST_APP_VALUES_CMD;
+
+/* GetCurAppValue */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       num_attr;
+    UINT8       attrs[AVRC_MAX_APP_ATTR_SIZE];
+} tAVRC_GET_CUR_APP_VALUE_CMD;
+
+/* SetAppValue */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       num_val;
+    tAVRC_APP_SETTING   *p_vals;
+} tAVRC_SET_APP_VALUE_CMD;
+
+/* GetAppAttrTxt */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       num_attr;
+    UINT8       attrs[AVRC_MAX_APP_ATTR_SIZE];
+} tAVRC_GET_APP_ATTR_TXT_CMD;
+
+/* GetAppValueTxt */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       attr_id;
+    UINT8       num_val;
+    UINT8       vals[AVRC_MAX_APP_ATTR_SIZE];
+} tAVRC_GET_APP_VAL_TXT_CMD;
+
+/* InformCharset */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       num_id;
+    UINT16      charsets[AVRC_MAX_CHARSET_SIZE];
+} tAVRC_INFORM_CHARSET_CMD;
+
+/* InformBatteryStatus */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       battery_status;
+} tAVRC_BATTERY_STATUS_CMD;
+
+/* GetElemAttrs */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       num_attr;
+    UINT32      attrs[AVRC_MAX_ELEM_ATTR_SIZE];
+} tAVRC_GET_ELEM_ATTRS_CMD;
+
+/* RegNotify */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       event_id;
+    UINT32      param;
+} tAVRC_REG_NOTIF_CMD;
+
+/* SetAddrPlayer */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT16      player_id;
+} tAVRC_SET_ADDR_PLAYER_CMD;
+
+/* SetBrowsedPlayer */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT16      player_id;
+} tAVRC_SET_BR_PLAYER_CMD;
+
+/* SetAbsVolume */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       volume;
+} tAVRC_SET_VOLUME_CMD;
+
+/* GetFolderItems */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       scope;
+    UINT32      start_item;
+    UINT32      end_item;
+    UINT8       attr_count;
+    UINT32      *p_attr_list;
+} tAVRC_GET_ITEMS_CMD;
+
+/* ChangePath */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT16      uid_counter;
+    UINT8       direction;
+    tAVRC_UID   folder_uid;
+} tAVRC_CHG_PATH_CMD;
+
+/* GetItemAttrs */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       scope;
+    tAVRC_UID   uid;
+    UINT16      uid_counter;
+    UINT8       attr_count;
+    UINT32      *p_attr_list;
+} tAVRC_GET_ATTRS_CMD;
+
+/* Search */
+typedef struct
+{
+    UINT8           pdu;
+    tAVRC_STS       status;
+    UINT8           opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    tAVRC_FULL_NAME string;
+} tAVRC_SEARCH_CMD;
+
+/* PlayItem */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       scope;
+    tAVRC_UID   uid;
+    UINT16      uid_counter;
+} tAVRC_PLAY_ITEM_CMD;
+
+/* AddToNowPlaying */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       scope;
+    tAVRC_UID   uid;
+    UINT16      uid_counter;
+} tAVRC_ADD_TO_PLAY_CMD;
+
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+} tAVRC_CMD;
+
+/* Continue and Abort */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (assigned by AVRC_BldCommand according to pdu) */
+    UINT8       target_pdu;
+} tAVRC_NEXT_CMD;
+
+typedef union
+{
+    UINT8                       pdu;
+    tAVRC_CMD                   cmd;
+    tAVRC_GET_CAPS_CMD          get_caps;               /* GetCapability */
+    tAVRC_CMD                   list_app_attr;          /* ListPlayerAppAttr */
+    tAVRC_LIST_APP_VALUES_CMD   list_app_values;        /* ListPlayerAppValues */
+    tAVRC_GET_CUR_APP_VALUE_CMD get_cur_app_val;        /* GetCurAppValue */
+    tAVRC_SET_APP_VALUE_CMD     set_app_val;            /* SetAppValue */
+    tAVRC_GET_APP_ATTR_TXT_CMD  get_app_attr_txt;       /* GetAppAttrTxt */
+    tAVRC_GET_APP_VAL_TXT_CMD   get_app_val_txt;        /* GetAppValueTxt */
+    tAVRC_INFORM_CHARSET_CMD    inform_charset;         /* InformCharset */
+    tAVRC_BATTERY_STATUS_CMD    inform_battery_status;  /* InformBatteryStatus */
+    tAVRC_GET_ELEM_ATTRS_CMD    get_elem_attrs;         /* GetElemAttrs */
+    tAVRC_CMD                   get_play_status;        /* GetPlayStatus */
+    tAVRC_REG_NOTIF_CMD         reg_notif;              /* RegNotify */
+    tAVRC_NEXT_CMD              continu;                /* Continue */
+    tAVRC_NEXT_CMD              abort;                  /* Abort */
+
+    tAVRC_SET_ADDR_PLAYER_CMD   addr_player;            /* SetAddrPlayer */
+    tAVRC_SET_VOLUME_CMD        volume;                 /* SetAbsVolume */
+    tAVRC_SET_BR_PLAYER_CMD     br_player;              /* SetBrowsedPlayer */
+    tAVRC_GET_ITEMS_CMD         get_items;              /* GetFolderItems */
+    tAVRC_CHG_PATH_CMD          chg_path;               /* ChangePath */
+    tAVRC_GET_ATTRS_CMD         get_attrs;              /* GetItemAttrs */
+    tAVRC_SEARCH_CMD            search;                 /* Search */
+    tAVRC_PLAY_ITEM_CMD         play_item;              /* PlayItem */
+    tAVRC_ADD_TO_PLAY_CMD       add_to_play;            /* AddToNowPlaying */
+} tAVRC_COMMAND;
+
+/* GetCapability */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       capability_id;
+    UINT8       count;
+    tAVRC_CAPS_PARAM param;
+} tAVRC_GET_CAPS_RSP;
+
+/* ListPlayerAppAttr */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       num_attr;
+    UINT8       attrs[AVRC_MAX_APP_ATTR_SIZE];
+} tAVRC_LIST_APP_ATTR_RSP;
+
+/* ListPlayerAppValues */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       num_val;
+    UINT8       vals[AVRC_MAX_APP_ATTR_SIZE];
+} tAVRC_LIST_APP_VALUES_RSP;
+
+/* GetCurAppValue */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       num_val;
+    tAVRC_APP_SETTING   *p_vals;
+} tAVRC_GET_CUR_APP_VALUE_RSP;
+
+/* GetAppAttrTxt */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       num_attr;
+    tAVRC_APP_SETTING_TEXT   *p_attrs;
+} tAVRC_GET_APP_ATTR_TXT_RSP;
+
+/* GetElemAttrs */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8       num_attr;
+    tAVRC_ATTR_ENTRY   *p_attrs;
+} tAVRC_GET_ELEM_ATTRS_RSP;
+
+/* GetPlayStatus */
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT32      song_len;
+    UINT32      song_pos;
+    UINT8       play_status;
+} tAVRC_GET_PLAY_STATUS_RSP;
+
+/* notification event parameter for AddressedPlayer change */
+typedef struct
+{
+    UINT16              player_id;
+    UINT16              uid_counter;
+} tAVRC_ADDR_PLAYER_PARAM;
+
+#ifndef AVRC_MAX_APP_SETTINGS
+#define AVRC_MAX_APP_SETTINGS    8
+#endif
+
+/* notification event parameter for Player Application setting change */
+typedef struct
+{
+    UINT8               num_attr;
+    UINT8               attr_id[AVRC_MAX_APP_SETTINGS];
+    UINT8               attr_value[AVRC_MAX_APP_SETTINGS];
+} tAVRC_PLAYER_APP_PARAM;
+
+typedef union
+{
+    tAVRC_PLAYSTATE         play_status;
+    tAVRC_UID               track;
+    UINT32                  play_pos;
+    tAVRC_BATTERY_STATUS    battery_status;
+    tAVRC_SYSTEMSTATE       system_status;
+    tAVRC_PLAYER_APP_PARAM  player_setting;
+    tAVRC_ADDR_PLAYER_PARAM addr_player;
+    UINT16                  uid_counter;
+    UINT8                   volume;
+} tAVRC_NOTIF_RSP_PARAM;
+
+/* RegNotify */
+typedef struct
+{
+    UINT8                   pdu;
+    tAVRC_STS               status;
+    UINT8                   opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8                   event_id;
+    tAVRC_NOTIF_RSP_PARAM   param;
+} tAVRC_REG_NOTIF_RSP;
+
+/* SetAbsVolume */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8               volume;
+} tAVRC_SET_VOLUME_RSP;
+
+/* SetBrowsedPlayer */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT16              uid_counter;
+    UINT32              num_items;
+    UINT16              charset_id;
+    UINT8               folder_depth;
+    tAVRC_NAME          *p_folders;
+} tAVRC_SET_BR_PLAYER_RSP;
+
+/* GetFolderItems */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT16              uid_counter;
+    UINT16              item_count;
+    tAVRC_ITEM          *p_item_list;
+} tAVRC_GET_ITEMS_RSP;
+
+/* ChangePath */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT32              num_items;
+} tAVRC_CHG_PATH_RSP;
+
+/* GetItemAttrs */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT8               attr_count;
+    tAVRC_ATTR_ENTRY    *p_attr_list;
+} tAVRC_GET_ATTRS_RSP;
+
+/* Search */
+typedef struct
+{
+    UINT8               pdu;
+    tAVRC_STS           status;
+    UINT8               opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+    UINT16              uid_counter;
+    UINT32              num_items;
+} tAVRC_SEARCH_RSP;
+
+
+typedef struct
+{
+    UINT8       pdu;
+    tAVRC_STS   status;
+    UINT8       opcode;         /* Op Code (copied from avrc_cmd.opcode by AVRC_BldResponse user. invalid one to generate according to pdu) */
+} tAVRC_RSP;
+
+typedef union
+{
+    UINT8                           pdu;
+    tAVRC_RSP                       rsp;
+    tAVRC_GET_CAPS_RSP              get_caps;               /* GetCapability */
+    tAVRC_LIST_APP_ATTR_RSP         list_app_attr;          /* ListPlayerAppAttr */
+    tAVRC_LIST_APP_VALUES_RSP       list_app_values;        /* ListPlayerAppValues */
+    tAVRC_GET_CUR_APP_VALUE_RSP     get_cur_app_val;        /* GetCurAppValue */
+    tAVRC_RSP                       set_app_val;            /* SetAppValue */
+    tAVRC_GET_APP_ATTR_TXT_RSP      get_app_attr_txt;       /* GetAppAttrTxt */
+    tAVRC_GET_APP_ATTR_TXT_RSP      get_app_val_txt;        /* GetAppValueTxt */
+    tAVRC_RSP                       inform_charset;         /* InformCharset */
+    tAVRC_RSP                       inform_battery_status;  /* InformBatteryStatus */
+    tAVRC_GET_ELEM_ATTRS_RSP        get_elem_attrs;         /* GetElemAttrs */
+    tAVRC_GET_PLAY_STATUS_RSP       get_play_status;        /* GetPlayStatus */
+    tAVRC_REG_NOTIF_RSP             reg_notif;              /* RegNotify */
+    tAVRC_RSP                       continu;                /* Continue */
+    tAVRC_RSP                       abort;                  /* Abort */
+
+    tAVRC_RSP                       addr_player;            /* SetAddrPlayer */
+    tAVRC_SET_VOLUME_RSP            volume;                 /* SetAbsVolume */
+    tAVRC_SET_BR_PLAYER_RSP         br_player;              /* SetBrowsedPlayer */
+    tAVRC_GET_ITEMS_RSP             get_items;              /* GetFolderItems */
+    tAVRC_CHG_PATH_RSP              chg_path;               /* ChangePath */
+    tAVRC_GET_ATTRS_RSP             get_attrs;              /* GetItemAttrs */
+    tAVRC_SEARCH_RSP                search;                 /* Search */
+    tAVRC_RSP                       play_item;              /* PlayItem */
+    tAVRC_RSP                       add_to_play;            /* AddToNowPlaying */
+} tAVRC_RESPONSE;
+
+
+#endif
diff --git a/stack/include/bnep_api.h b/stack/include/bnep_api.h
new file mode 100644
index 0000000..b2bc0fd
--- /dev/null
+++ b/stack/include/bnep_api.h
@@ -0,0 +1,476 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This interface file contains the interface to the Bluetooth Network
+ *  Encapsilation Protocol (BNEP).
+ *
+ ******************************************************************************/
+#ifndef BNEP_API_H
+#define BNEP_API_H
+
+#include "l2c_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* Define the minimum offset needed in a GKI buffer for
+** sending BNEP packets. Note, we are currently not sending
+** extension headers, but may in the future, so allow
+** space for them
+*/
+#define BNEP_MINIMUM_OFFSET        (15 + L2CAP_MIN_OFFSET)
+#define BNEP_INVALID_HANDLE         0xFFFF
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* Define the result codes from BNEP
+*/
+enum
+{
+    BNEP_SUCCESS,                       /* Success                           */
+    BNEP_CONN_DISCONNECTED,             /* Connection terminated   */
+    BNEP_NO_RESOURCES,                  /* No resources                      */
+    BNEP_MTU_EXCEDED,                   /* Attempt to write long data        */
+    BNEP_INVALID_OFFSET,                /* Insufficient offset in GKI buffer */
+    BNEP_CONN_FAILED,                   /* Connection failed                 */
+    BNEP_CONN_FAILED_CFG,               /* Connection failed cos of config   */
+    BNEP_CONN_FAILED_SRC_UUID,          /* Connection failed wrong source UUID   */
+    BNEP_CONN_FAILED_DST_UUID,          /* Connection failed wrong destination UUID   */
+    BNEP_CONN_FAILED_UUID_SIZE,         /* Connection failed wrong size UUID   */
+    BNEP_Q_SIZE_EXCEEDED,               /* Too many buffers to dest          */
+    BNEP_TOO_MANY_FILTERS,              /* Too many local filters specified  */
+    BNEP_SET_FILTER_FAIL,               /* Set Filter failed  */
+    BNEP_WRONG_HANDLE,                  /* Wrong handle for the connection  */
+    BNEP_WRONG_STATE,                   /* Connection is in wrong state */
+    BNEP_SECURITY_FAIL,                 /* Failed because of security */
+    BNEP_IGNORE_CMD,                    /* To ignore the rcvd command */
+    BNEP_TX_FLOW_ON,                    /* tx data flow enabled */
+    BNEP_TX_FLOW_OFF                    /* tx data flow disabled */
+
+}; typedef UINT8 tBNEP_RESULT;
+
+
+/***************************
+**  Callback Functions
+****************************/
+
+/* Connection state change callback prototype. Parameters are
+**              Connection handle
+**              BD Address of remote
+**              Connection state change result
+**                  BNEP_SUCCESS indicates connection is success
+**                  All values are used to indicate the reason for failure
+**              Flag to indicate if it is just a role change
+*/
+typedef void (tBNEP_CONN_STATE_CB) (UINT16 handle,
+                                    BD_ADDR rem_bda,
+                                    tBNEP_RESULT result,
+                                    BOOLEAN is_role_change);
+
+
+
+
+/* Connection indication callback prototype. Parameters are
+**              BD Address of remote, remote UUID and local UUID
+**              and flag to indicate role change and handle to the connection
+**              When BNEP calls this function profile should
+**              use BNEP_ConnectResp call to accept or reject the request
+*/
+typedef void (tBNEP_CONNECT_IND_CB) (UINT16 handle,
+                                     BD_ADDR bd_addr,
+                                     tBT_UUID *remote_uuid,
+                                     tBT_UUID *local_uuid,
+                                     BOOLEAN is_role_change);
+
+
+
+/* Data buffer received indication callback prototype. Parameters are
+**              Handle to the connection
+**              Source BD/Ethernet Address
+**              Dest BD/Ethernet address
+**              Protocol
+**              Pointer to the buffer
+**              Flag to indicate whether extension headers to be forwarded are present
+*/
+typedef void (tBNEP_DATA_BUF_CB) (UINT16 handle,
+                                  UINT8 *src,
+                                  UINT8 *dst,
+                                  UINT16 protocol,
+                                  BT_HDR *p_buf,
+                                  BOOLEAN fw_ext_present);
+
+
+/* Data received indication callback prototype. Parameters are
+**              Handle to the connection
+**              Source BD/Ethernet Address
+**              Dest BD/Ethernet address
+**              Protocol
+**              Pointer to the beginning of the data
+**              Length of data
+**              Flag to indicate whether extension headers to be forwarded are present
+*/
+typedef void (tBNEP_DATA_IND_CB) (UINT16 handle,
+                                  UINT8 *src,
+                                  UINT8 *dst,
+                                  UINT16 protocol,
+                                  UINT8 *p_data,
+                                  UINT16 len,
+                                  BOOLEAN fw_ext_present);
+
+/* Flow control callback for TX data. Parameters are
+**              Handle to the connection
+**              Event  flow status
+*/
+typedef void (tBNEP_TX_DATA_FLOW_CB) (UINT16 handle,
+                                      tBNEP_RESULT  event);
+
+/* Filters received indication callback prototype. Parameters are
+**              Handle to the connection
+**              TRUE if the cb is called for indication
+**              Ignore this if it is indication, otherwise it is the result
+**                      for the filter set operation performed by the local
+**                      device
+**              Number of protocol filters present
+**              Pointer to the filters start. Filters are present in pairs
+**                      of start of the range and end of the range.
+**                      They will be present in big endian order. First
+**                      two bytes will be starting of the first range and
+**                      next two bytes will be ending of the range.
+*/
+typedef void (tBNEP_FILTER_IND_CB) (UINT16 handle,
+                                    BOOLEAN indication,
+                                    tBNEP_RESULT result,
+                                    UINT16 num_filters,
+                                    UINT8 *p_filters);
+
+
+
+/* Multicast Filters received indication callback prototype. Parameters are
+**              Handle to the connection
+**              TRUE if the cb is called for indication
+**              Ignore this if it is indication, otherwise it is the result
+**                      for the filter set operation performed by the local
+**                      device
+**              Number of multicast filters present
+**              Pointer to the filters start. Filters are present in pairs
+**                      of start of the range and end of the range.
+**                      First six bytes will be starting of the first range and
+**                      next six bytes will be ending of the range.
+*/
+typedef void (tBNEP_MFILTER_IND_CB) (UINT16 handle,
+                                     BOOLEAN indication,
+                                     tBNEP_RESULT result,
+                                     UINT16 num_mfilters,
+                                     UINT8 *p_mfilters);
+
+/* This is the structure used by profile to register with BNEP */
+typedef struct
+{
+    tBNEP_CONNECT_IND_CB    *p_conn_ind_cb;     /* To indicate the conn request */
+    tBNEP_CONN_STATE_CB     *p_conn_state_cb;   /* To indicate conn state change */
+    tBNEP_DATA_IND_CB       *p_data_ind_cb;     /* To pass the data received */
+    tBNEP_DATA_BUF_CB       *p_data_buf_cb;     /* To pass the data buffer received */
+    tBNEP_TX_DATA_FLOW_CB   *p_tx_data_flow_cb; /* data flow callback */
+    tBNEP_FILTER_IND_CB     *p_filter_ind_cb;   /* To indicate that peer set protocol filters */
+    tBNEP_MFILTER_IND_CB    *p_mfilter_ind_cb;  /* To indicate that peer set mcast filters */
+
+} tBNEP_REGISTER;
+
+
+
+/* This is the structure used by profile to get the status of BNEP */
+typedef struct
+{
+#define BNEP_STATUS_FAILE            0
+#define BNEP_STATUS_CONNECTED        1
+    UINT8             con_status;
+
+    UINT16            l2cap_cid;
+    BD_ADDR           rem_bda;
+    UINT16            rem_mtu_size;
+    UINT16            xmit_q_depth;
+
+    UINT16            sent_num_filters;
+    UINT16            sent_mcast_filters;
+    UINT16            rcvd_num_filters;
+    UINT16            rcvd_mcast_filters;
+    tBT_UUID          src_uuid;
+    tBT_UUID          dst_uuid;
+
+} tBNEP_STATUS;
+
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*******************************************************************************
+**
+** Function         BNEP_Register
+**
+** Description      This function is called by the upper layer to register
+**                  its callbacks with BNEP
+**
+** Parameters:      p_reg_info - contains all callback function pointers
+**
+**
+** Returns          BNEP_SUCCESS        if registered successfully
+**                  BNEP_FAILURE        if connection state callback is missing
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_Register (tBNEP_REGISTER *p_reg_info);
+
+/*******************************************************************************
+**
+** Function         BNEP_Deregister
+**
+** Description      This function is called by the upper layer to de-register
+**                  its callbacks.
+**
+** Parameters:      void
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+BNEP_API extern void BNEP_Deregister (void);
+
+
+/*******************************************************************************
+**
+** Function         BNEP_Connect
+**
+** Description      This function creates a BNEP connection to a remote
+**                  device.
+**
+** Parameters:      p_rem_addr  - BD_ADDR of the peer
+**                  src_uuid    - source uuid for the connection
+**                  dst_uuid    - destination uuid for the connection
+**                  p_handle    - pointer to return the handle for the connection
+**
+** Returns          BNEP_SUCCESS                if connection started
+**                  BNEP_NO_RESOURCES           if no resources
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_Connect (BD_ADDR p_rem_bda,
+                                         tBT_UUID *src_uuid,
+                                         tBT_UUID *dst_uuid,
+                                         UINT16 *p_handle);
+
+/*******************************************************************************
+**
+** Function         BNEP_ConnectResp
+**
+** Description      This function is called in responce to connection indication
+**
+**
+** Parameters:      handle  - handle given in the connection indication
+**                  resp    - responce for the connection indication
+**
+** Returns          BNEP_SUCCESS                if connection started
+**                  BNEP_WRONG_HANDLE           if the connection is not found
+**                  BNEP_WRONG_STATE            if the responce is not expected
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_ConnectResp (UINT16 handle, tBNEP_RESULT resp);
+
+/*******************************************************************************
+**
+** Function         BNEP_Disconnect
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle   - handle of the connection
+**
+** Returns          BNEP_SUCCESS                if connection is disconnected
+**                  BNEP_WRONG_HANDLE           if no connection is not found
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_Disconnect (UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         BNEP_WriteBuf
+**
+** Description      This function sends data in a GKI buffer on BNEP connection
+**
+** Parameters:      handle       - handle of the connection to write
+**                  p_dest_addr  - BD_ADDR/Ethernet addr of the destination
+**                  p_buf        - pointer to address of buffer with data
+**                  protocol     - protocol type of the packet
+**                  p_src_addr   - (optional) BD_ADDR/ethernet address of the source
+**                                 (should be NULL if it is local BD Addr)
+**                  fw_ext_present - forwarded extensions present
+**
+** Returns:         BNEP_WRONG_HANDLE       - if passed handle is not valid
+**                  BNEP_MTU_EXCEDED        - If the data length is greater than MTU
+**                  BNEP_IGNORE_CMD         - If the packet is filtered out
+**                  BNEP_Q_SIZE_EXCEEDED    - If the Tx Q is full
+**                  BNEP_SUCCESS            - If written successfully
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_WriteBuf (UINT16 handle,
+                                          UINT8 *p_dest_addr,
+                                          BT_HDR *p_buf,
+                                          UINT16 protocol,
+                                          UINT8 *p_src_addr,
+                                          BOOLEAN fw_ext_present);
+
+/*******************************************************************************
+**
+** Function         BNEP_Write
+**
+** Description      This function sends data over a BNEP connection
+**
+** Parameters:      handle       - handle of the connection to write
+**                  p_dest_addr  - BD_ADDR/Ethernet addr of the destination
+**                  p_data       - pointer to data start
+**                  protocol     - protocol type of the packet
+**                  p_src_addr   - (optional) BD_ADDR/ethernet address of the source
+**                                 (should be NULL if it is local BD Addr)
+**                  fw_ext_present - forwarded extensions present
+**
+** Returns:         BNEP_WRONG_HANDLE       - if passed handle is not valid
+**                  BNEP_MTU_EXCEDED        - If the data length is greater than MTU
+**                  BNEP_IGNORE_CMD         - If the packet is filtered out
+**                  BNEP_Q_SIZE_EXCEEDED    - If the Tx Q is full
+**                  BNEP_NO_RESOURCES       - If not able to allocate a buffer
+**                  BNEP_SUCCESS            - If written successfully
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT  BNEP_Write (UINT16 handle,
+                                        UINT8 *p_dest_addr,
+                                        UINT8 *p_data,
+                                        UINT16 len,
+                                        UINT16 protocol,
+                                        UINT8 *p_src_addr,
+                                        BOOLEAN fw_ext_present);
+
+/*******************************************************************************
+**
+** Function         BNEP_SetProtocolFilters
+**
+** Description      This function sets the protocol filters on peer device
+**
+** Parameters:      handle        - Handle for the connection
+**                  num_filters   - total number of filter ranges
+**                  p_start_array - Array of beginings of all protocol ranges
+**                  p_end_array   - Array of ends of all protocol ranges
+**
+** Returns          BNEP_WRONG_HANDLE           - if the connection handle is not valid
+**                  BNEP_SET_FILTER_FAIL        - if the connection is in wrong state
+**                  BNEP_TOO_MANY_FILTERS       - if too many filters
+**                  BNEP_SUCCESS                - if request sent successfully
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_SetProtocolFilters (UINT16 handle,
+                                                    UINT16 num_filters,
+                                                    UINT16 *p_start_array,
+                                                    UINT16 *p_end_array);
+
+/*******************************************************************************
+**
+** Function         BNEP_SetMulticastFilters
+**
+** Description      This function sets the filters for multicast addresses for BNEP.
+**
+** Parameters:      handle        - Handle for the connection
+**                  num_filters   - total number of filter ranges
+**                  p_start_array - Pointer to sequence of beginings of all
+**                                         multicast address ranges
+**                  p_end_array   - Pointer to sequence of ends of all
+**                                         multicast address ranges
+**
+** Returns          BNEP_WRONG_HANDLE           - if the connection handle is not valid
+**                  BNEP_SET_FILTER_FAIL        - if the connection is in wrong state
+**                  BNEP_TOO_MANY_FILTERS       - if too many filters
+**                  BNEP_SUCCESS                - if request sent successfully
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_SetMulticastFilters (UINT16 handle,
+                                                     UINT16 num_filters,
+                                                     UINT8 *p_start_array,
+                                                     UINT8 *p_end_array);
+
+/*******************************************************************************
+**
+** Function         BNEP_GetMyBdAddr
+**
+** Description      This function returns a pointer to the local device BD address.
+**                  If the BD address has not been read yet, it returns NULL.
+**
+** Returns          the BD address
+**
+*******************************************************************************/
+BNEP_API extern UINT8 *BNEP_GetMyBdAddr (void);
+
+/*******************************************************************************
+**
+** Function         BNEP_SetTraceLevel
+**
+** Description      This function sets the trace level for BNEP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+BNEP_API extern UINT8 BNEP_SetTraceLevel (UINT8 new_level);
+
+/*******************************************************************************
+**
+** Function         BNEP_Init
+**
+** Description      This function initializes the BNEP unit. It should be called
+**                  before accessing any other APIs to initialize the control block
+**
+** Returns          void
+**
+*******************************************************************************/
+BNEP_API extern void BNEP_Init (void);
+
+/*******************************************************************************
+**
+** Function         BNEP_GetStatus
+**
+** Description      This function gets the status information for BNEP connection
+**
+** Returns          BNEP_SUCCESS            - if the status is available
+**                  BNEP_NO_RESOURCES       - if no structure is passed for output
+**                  BNEP_WRONG_HANDLE       - if the handle is invalid
+**                  BNEP_WRONG_STATE        - if not in connected state
+**
+*******************************************************************************/
+BNEP_API extern tBNEP_RESULT BNEP_GetStatus (UINT16 handle, tBNEP_STATUS *p_status);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif
diff --git a/stack/include/bt_types.h b/stack/include/bt_types.h
new file mode 100644
index 0000000..5809968
--- /dev/null
+++ b/stack/include/bt_types.h
@@ -0,0 +1,690 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_TYPES_H
+#define BT_TYPES_H
+
+#include "data_types.h"
+
+#ifdef _WIN32
+#ifdef BLUESTACK_TESTER
+    #include "bte_stack_entry.h"
+#endif
+#endif
+
+/* READ WELL !!
+**
+** This section defines global events. These are events that cross layers.
+** Any event that passes between layers MUST be one of these events. Tasks
+** can use their own events internally, but a FUNDAMENTAL design issue is
+** that global events MUST be one of these events defined below.
+**
+** The convention used is the the event name contains the layer that the
+** event is going to.
+*/
+#define BT_EVT_MASK                 0xFF00
+#define BT_SUB_EVT_MASK             0x00FF
+                                                /* To Bluetooth Upper Layers        */
+                                                /************************************/
+#define BT_EVT_TO_BTU_L2C_EVT       0x0900      /* L2CAP event */
+#define BT_EVT_TO_BTU_HCI_EVT       0x1000      /* HCI Event                        */
+#define BT_EVT_TO_BTU_HCI_BR_EDR_EVT (0x0000 | BT_EVT_TO_BTU_HCI_EVT)      /* event from BR/EDR controller */
+#define BT_EVT_TO_BTU_HCI_AMP1_EVT   (0x0001 | BT_EVT_TO_BTU_HCI_EVT)      /* event from local AMP 1 controller */
+#define BT_EVT_TO_BTU_HCI_AMP2_EVT   (0x0002 | BT_EVT_TO_BTU_HCI_EVT)      /* event from local AMP 2 controller */
+#define BT_EVT_TO_BTU_HCI_AMP3_EVT   (0x0003 | BT_EVT_TO_BTU_HCI_EVT)      /* event from local AMP 3 controller */
+
+#define BT_EVT_TO_BTU_HCI_ACL       0x1100      /* ACL Data from HCI                */
+#define BT_EVT_TO_BTU_HCI_SCO       0x1200      /* SCO Data from HCI                */
+#define BT_EVT_TO_BTU_HCIT_ERR      0x1300      /* HCI Transport Error              */
+
+#define BT_EVT_TO_BTU_SP_EVT        0x1400      /* Serial Port Event                */
+#define BT_EVT_TO_BTU_SP_DATA       0x1500      /* Serial Port Data                 */
+
+#define BT_EVT_TO_BTU_HCI_CMD       0x1600      /* HCI command from upper layer     */
+
+
+#define BT_EVT_TO_BTU_L2C_SEG_XMIT  0x1900      /* L2CAP segment(s) transmitted     */
+
+#define BT_EVT_PROXY_INCOMING_MSG   0x1A00      /* BlueStackTester event: incoming message from target */
+
+#define BT_EVT_BTSIM                0x1B00      /* Insight BTSIM event */
+#define BT_EVT_BTISE                0x1C00      /* Insight Script Engine event */
+
+                                                /* To LM                            */
+                                                /************************************/
+#define BT_EVT_TO_LM_HCI_CMD        0x2000      /* HCI Command                      */
+#define BT_EVT_TO_LM_HCI_ACL        0x2100      /* HCI ACL Data                     */
+#define BT_EVT_TO_LM_HCI_SCO        0x2200      /* HCI SCO Data                     */
+#define BT_EVT_TO_LM_HCIT_ERR       0x2300      /* HCI Transport Error              */
+#define BT_EVT_TO_LM_LC_EVT         0x2400      /* LC event                         */
+#define BT_EVT_TO_LM_LC_LMP         0x2500      /* LC Received LMP command frame    */
+#define BT_EVT_TO_LM_LC_ACL         0x2600      /* LC Received ACL data             */
+#define BT_EVT_TO_LM_LC_SCO         0x2700      /* LC Received SCO data  (not used) */
+#define BT_EVT_TO_LM_LC_ACL_TX      0x2800      /* LMP data transmit complete       */
+#define BT_EVT_TO_LM_LC_LMPC_TX     0x2900      /* LMP Command transmit complete    */
+#define BT_EVT_TO_LM_LOCAL_ACL_LB   0x2a00      /* Data to be locally loopbacked    */
+#define BT_EVT_TO_LM_HCI_ACL_ACK    0x2b00      /* HCI ACL Data ack      (not used) */
+#define BT_EVT_TO_LM_DIAG           0x2c00      /* LM Diagnostics commands          */
+
+
+#define BT_EVT_TO_BTM_CMDS          0x2f00
+#define BT_EVT_TO_BTM_PM_MDCHG_EVT (0x0001 | BT_EVT_TO_BTM_CMDS)
+
+#define BT_EVT_TO_TCS_CMDS          0x3000
+
+#define BT_EVT_TO_OBX_CL_MSG        0x3100
+#define BT_EVT_TO_OBX_SR_MSG        0x3200
+
+#define BT_EVT_TO_CTP_CMDS          0x3300
+
+/* Obex Over L2CAP */
+#define BT_EVT_TO_OBX_CL_L2C_MSG    0x3400
+#define BT_EVT_TO_OBX_SR_L2C_MSG    0x3500
+
+/* ftp events */
+#define BT_EVT_TO_FTP_SRVR_CMDS     0x3800
+#define BT_EVT_TO_FTP_CLNT_CMDS     0x3900
+
+#define BT_EVT_TO_BTU_SAP           0x3a00       /* SIM Access Profile events */
+
+/* opp events */
+#define BT_EVT_TO_OPP_SRVR_CMDS     0x3b00
+#define BT_EVT_TO_OPP_CLNT_CMDS     0x3c00
+
+/* gap events */
+#define BT_EVT_TO_GAP_MSG           0x3d00
+
+/* start timer */
+#define BT_EVT_TO_START_TIMER       0x3e00
+
+/* start quick timer */
+#define BT_EVT_TO_START_QUICK_TIMER 0x3f00
+
+
+/* for NFC                          */
+                                                /************************************/
+#define BT_EVT_TO_NFC_NCI           0x4000      /* NCI Command, Notification or Data*/
+#define BT_EVT_TO_NFC_INIT          0x4100      /* Initialization message */
+#define BT_EVT_TO_LLCP_ECHO         0x4200      /* LLCP Echo Service */
+#define BT_EVT_TO_LLCP_SOCKET       0x4300      /* LLCP over TCP/IP */
+#define BT_EVT_TO_NCI_LP            0x4400      /* Low power */
+#define BT_EVT_TO_NFC_ERR           0x4500      /* Error notification to NFC Task */
+
+#define BT_EVT_TO_NFCCSIM_NCI       0x4a00      /* events to NFCC simulation (NCI packets) */
+
+/* HCISU Events */
+
+#define BT_EVT_HCISU                0x5000
+
+// btla-specific ++
+#define BT_EVT_TO_HCISU_RECONFIG_EVT            (0x0001 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_UPDATE_BAUDRATE_EVT     (0x0002 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_LP_ENABLE_EVT           (0x0003 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_LP_DISABLE_EVT          (0x0004 | BT_EVT_HCISU)
+// btla-specific --
+#define BT_EVT_TO_HCISU_LP_APP_SLEEPING_EVT     (0x0005 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_LP_ALLOW_BT_SLEEP_EVT   (0x0006 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_LP_WAKEUP_HOST_EVT      (0x0007 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_LP_RCV_H4IBSS_EVT       (0x0008 | BT_EVT_HCISU)
+#define BT_EVT_TO_HCISU_H5_RESET_EVT            (0x0009 | BT_EVT_HCISU)
+#define BT_EVT_HCISU_START_QUICK_TIMER          (0x000a | BT_EVT_HCISU)
+
+#define BT_EVT_DATA_TO_AMP_1        0x5100
+#define BT_EVT_DATA_TO_AMP_15       0x5f00
+
+/* HSP Events */
+
+#define BT_EVT_BTU_HSP2             0x6000
+
+#define BT_EVT_TO_BTU_HSP2_EVT     (0x0001 | BT_EVT_BTU_HSP2)
+
+/* BPP Events */
+#define BT_EVT_TO_BPP_PR_CMDS       0x6100      /* Printer Events */
+#define BT_EVT_TO_BPP_SND_CMDS      0x6200      /* BPP Sender Events */
+
+/* BIP Events */
+#define BT_EVT_TO_BIP_CMDS          0x6300
+
+/* HCRP Events */
+
+#define BT_EVT_BTU_HCRP             0x7000
+
+#define BT_EVT_TO_BTU_HCRP_EVT     (0x0001 | BT_EVT_BTU_HCRP)
+#define BT_EVT_TO_BTU_HCRPM_EVT    (0x0002 | BT_EVT_BTU_HCRP)
+
+
+#define BT_EVT_BTU_HFP              0x8000
+#define BT_EVT_TO_BTU_HFP_EVT      (0x0001 | BT_EVT_BTU_HFP)
+
+#define BT_EVT_BTU_IPC_EVT          0x9000
+#define BT_EVT_BTU_IPC_LOGMSG_EVT  (0x0000 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_ACL_EVT     (0x0001 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_BTU_EVT     (0x0002 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_L2C_EVT     (0x0003 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_L2C_MSG_EVT (0x0004 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_BTM_EVT     (0x0005 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_AVDT_EVT    (0x0006 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_SLIP_EVT    (0x0007 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_MGMT_EVT    (0x0008 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_BTTRC_EVT   (0x0009 | BT_EVT_BTU_IPC_EVT)
+#define BT_EVT_BTU_IPC_BURST_EVT   (0x000A | BT_EVT_BTU_IPC_EVT)
+
+
+/* BTIF Events */
+#define BT_EVT_BTIF                 0xA000
+#define BT_EVT_CONTEXT_SWITCH_EVT  (0x0001 | BT_EVT_BTIF)
+
+#define BT_EVT_TRIGGER_STACK_INIT   EVENT_MASK(APPL_EVT_0)
+
+
+/* Define the header of each buffer used in the Bluetooth stack.
+*/
+typedef struct
+{
+    UINT16          event;
+    UINT16          len;
+    UINT16          offset;
+    UINT16          layer_specific;
+} BT_HDR;
+
+#define BT_HDR_SIZE (sizeof (BT_HDR))
+
+#define BT_PSM_SDP                      0x0001
+#define BT_PSM_RFCOMM                   0x0003
+#define BT_PSM_TCS                      0x0005
+#define BT_PSM_CTP                      0x0007
+#define BT_PSM_BNEP                     0x000F
+#define BT_PSM_HIDC                     0x0011
+#define BT_PSM_HIDI                     0x0013
+#define BT_PSM_UPNP                     0x0015
+#define BT_PSM_AVCTP                    0x0017
+#define BT_PSM_AVDTP                    0x0019
+#define BT_PSM_AVCTP_13                 0x001B /* Advanced Control - Browsing */
+#define BT_PSM_UDI_CP                   0x001D /* Unrestricted Digital Information Profile C-Plane  */
+#define BT_PSM_ATT                      0x001F /* Attribute Protocol  */
+
+
+/* These macros extract the HCI opcodes from a buffer
+*/
+#define HCI_GET_CMD_HDR_OPCODE(p)    (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \
+                                              (*((UINT8 *)((p) + 1) + p->offset + 1) << 8)))
+#define HCI_GET_CMD_HDR_PARAM_LEN(p) (UINT8)  (*((UINT8 *)((p) + 1) + p->offset + 2))
+
+#define HCI_GET_EVT_HDR_OPCODE(p)    (UINT8)(*((UINT8 *)((p) + 1) + p->offset))
+#define HCI_GET_EVT_HDR_PARAM_LEN(p) (UINT8)  (*((UINT8 *)((p) + 1) + p->offset + 1))
+
+
+/********************************************************************************
+** Macros to get and put bytes to and from a stream (Little Endian format).
+*/
+#define UINT32_TO_STREAM(p, u32) {*(p)++ = (UINT8)(u32); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 24);}
+#define UINT24_TO_STREAM(p, u24) {*(p)++ = (UINT8)(u24); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)((u24) >> 16);}
+#define UINT16_TO_STREAM(p, u16) {*(p)++ = (UINT8)(u16); *(p)++ = (UINT8)((u16) >> 8);}
+#define UINT8_TO_STREAM(p, u8)   {*(p)++ = (UINT8)(u8);}
+#define INT8_TO_STREAM(p, u8)    {*(p)++ = (INT8)(u8);}
+#define ARRAY32_TO_STREAM(p, a)  {register int ijk; for (ijk = 0; ijk < 32;           ijk++) *(p)++ = (UINT8) a[31 - ijk];}
+#define ARRAY16_TO_STREAM(p, a)  {register int ijk; for (ijk = 0; ijk < 16;           ijk++) *(p)++ = (UINT8) a[15 - ijk];}
+#define ARRAY8_TO_STREAM(p, a)   {register int ijk; for (ijk = 0; ijk < 8;            ijk++) *(p)++ = (UINT8) a[7 - ijk];}
+#define BDADDR_TO_STREAM(p, a)   {register int ijk; for (ijk = 0; ijk < BD_ADDR_LEN;  ijk++) *(p)++ = (UINT8) a[BD_ADDR_LEN - 1 - ijk];}
+#define LAP_TO_STREAM(p, a)      {register int ijk; for (ijk = 0; ijk < LAP_LEN;      ijk++) *(p)++ = (UINT8) a[LAP_LEN - 1 - ijk];}
+#define DEVCLASS_TO_STREAM(p, a) {register int ijk; for (ijk = 0; ijk < DEV_CLASS_LEN;ijk++) *(p)++ = (UINT8) a[DEV_CLASS_LEN - 1 - ijk];}
+#define ARRAY_TO_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len;        ijk++) *(p)++ = (UINT8) a[ijk];}
+#define REVERSE_ARRAY_TO_STREAM(p, a, len)  {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[len - 1 - ijk];}
+
+#define STREAM_TO_UINT8(u8, p)   {u8 = (UINT8)(*(p)); (p) += 1;}
+#define STREAM_TO_UINT16(u16, p) {u16 = ((UINT16)(*(p)) + (((UINT16)(*((p) + 1))) << 8)); (p) += 2;}
+#define STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) ); (p) += 3;}
+#define STREAM_TO_UINT32(u32, p) {u32 = (((UINT32)(*(p))) + ((((UINT32)(*((p) + 1)))) << 8) + ((((UINT32)(*((p) + 2)))) << 16) + ((((UINT32)(*((p) + 3)))) << 24)); (p) += 4;}
+#define STREAM_TO_BDADDR(a, p)   {register int ijk; register UINT8 *pbda = (UINT8 *)a + BD_ADDR_LEN - 1; for (ijk = 0; ijk < BD_ADDR_LEN; ijk++) *pbda-- = *p++;}
+#define STREAM_TO_ARRAY32(a, p)  {register int ijk; register UINT8 *_pa = (UINT8 *)a + 31; for (ijk = 0; ijk < 32; ijk++) *_pa-- = *p++;}
+#define STREAM_TO_ARRAY16(a, p)  {register int ijk; register UINT8 *_pa = (UINT8 *)a + 15; for (ijk = 0; ijk < 16; ijk++) *_pa-- = *p++;}
+#define STREAM_TO_ARRAY8(a, p)   {register int ijk; register UINT8 *_pa = (UINT8 *)a + 7; for (ijk = 0; ijk < 8; ijk++) *_pa-- = *p++;}
+#define STREAM_TO_DEVCLASS(a, p) {register int ijk; register UINT8 *_pa = (UINT8 *)a + DEV_CLASS_LEN - 1; for (ijk = 0; ijk < DEV_CLASS_LEN; ijk++) *_pa-- = *p++;}
+#define STREAM_TO_LAP(a, p)      {register int ijk; register UINT8 *plap = (UINT8 *)a + LAP_LEN - 1; for (ijk = 0; ijk < LAP_LEN; ijk++) *plap-- = *p++;}
+#define STREAM_TO_ARRAY(a, p, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;}
+#define REVERSE_STREAM_TO_ARRAY(a, p, len) {register int ijk; register UINT8 *_pa = (UINT8 *)a + len - 1; for (ijk = 0; ijk < len; ijk++) *_pa-- = *p++;}
+
+/********************************************************************************
+** Macros to get and put bytes to and from a field (Little Endian format).
+** These are the same as to stream, except the pointer is not incremented.
+*/
+#define UINT32_TO_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)(u32); *((UINT8 *)(p)+1) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+3) = (UINT8)((u32) >> 24);}
+#define UINT24_TO_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)(u24); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)((u24) >> 16);}
+#define UINT16_TO_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)(u16); *((UINT8 *)(p)+1) = (UINT8)((u16) >> 8);}
+#define UINT8_TO_FIELD(p, u8)   {*(UINT8 *)(p) = (UINT8)(u8);}
+
+
+/********************************************************************************
+** Macros to get and put bytes to and from a stream (Big Endian format)
+*/
+#define UINT32_TO_BE_STREAM(p, u32) {*(p)++ = (UINT8)((u32) >> 24);  *(p)++ = (UINT8)((u32) >> 16); *(p)++ = (UINT8)((u32) >> 8); *(p)++ = (UINT8)(u32); }
+#define UINT24_TO_BE_STREAM(p, u24) {*(p)++ = (UINT8)((u24) >> 16); *(p)++ = (UINT8)((u24) >> 8); *(p)++ = (UINT8)(u24);}
+#define UINT16_TO_BE_STREAM(p, u16) {*(p)++ = (UINT8)((u16) >> 8); *(p)++ = (UINT8)(u16);}
+#define UINT8_TO_BE_STREAM(p, u8)   {*(p)++ = (UINT8)(u8);}
+#define ARRAY_TO_BE_STREAM(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) *(p)++ = (UINT8) a[ijk];}
+
+#define BE_STREAM_TO_UINT8(u8, p)   {u8 = (UINT8)(*(p)); (p) += 1;}
+#define BE_STREAM_TO_UINT16(u16, p) {u16 = (UINT16)(((UINT16)(*(p)) << 8) + (UINT16)(*((p) + 1))); (p) += 2;}
+#define BE_STREAM_TO_UINT24(u32, p) {u32 = (((UINT32)(*((p) + 2))) + ((UINT32)(*((p) + 1)) << 8) + ((UINT32)(*(p)) << 16)); (p) += 3;}
+#define BE_STREAM_TO_UINT32(u32, p) {u32 = ((UINT32)(*((p) + 3)) + ((UINT32)(*((p) + 2)) << 8) + ((UINT32)(*((p) + 1)) << 16) + ((UINT32)(*(p)) << 24)); (p) += 4;}
+#define BE_STREAM_TO_ARRAY(p, a, len) {register int ijk; for (ijk = 0; ijk < len; ijk++) ((UINT8 *) a)[ijk] = *p++;}
+
+
+/********************************************************************************
+** Macros to get and put bytes to and from a field (Big Endian format).
+** These are the same as to stream, except the pointer is not incremented.
+*/
+#define UINT32_TO_BE_FIELD(p, u32) {*(UINT8 *)(p) = (UINT8)((u32) >> 24);  *((UINT8 *)(p)+1) = (UINT8)((u32) >> 16); *((UINT8 *)(p)+2) = (UINT8)((u32) >> 8); *((UINT8 *)(p)+3) = (UINT8)(u32); }
+#define UINT24_TO_BE_FIELD(p, u24) {*(UINT8 *)(p) = (UINT8)((u24) >> 16); *((UINT8 *)(p)+1) = (UINT8)((u24) >> 8); *((UINT8 *)(p)+2) = (UINT8)(u24);}
+#define UINT16_TO_BE_FIELD(p, u16) {*(UINT8 *)(p) = (UINT8)((u16) >> 8); *((UINT8 *)(p)+1) = (UINT8)(u16);}
+#define UINT8_TO_BE_FIELD(p, u8)   {*(UINT8 *)(p) = (UINT8)(u8);}
+
+
+/* Common Bluetooth field definitions */
+#define BD_ADDR_LEN     6                   /* Device address length */
+typedef UINT8 BD_ADDR[BD_ADDR_LEN];         /* Device address */
+typedef UINT8 *BD_ADDR_PTR;                 /* Pointer to Device Address */
+
+#define AMP_KEY_TYPE_GAMP       0
+#define AMP_KEY_TYPE_WIFI       1
+#define AMP_KEY_TYPE_UWB        2
+typedef UINT8 tAMP_KEY_TYPE;
+
+#define BT_OCTET8_LEN    8
+typedef UINT8 BT_OCTET8[BT_OCTET8_LEN];   /* octet array: size 16 */
+
+#define LINK_KEY_LEN    16
+typedef UINT8 LINK_KEY[LINK_KEY_LEN];       /* Link Key */
+
+#define AMP_LINK_KEY_LEN        32
+typedef UINT8 AMP_LINK_KEY[AMP_LINK_KEY_LEN];   /* Dedicated AMP and GAMP Link Keys */
+
+#define BT_OCTET16_LEN    16
+typedef UINT8 BT_OCTET16[BT_OCTET16_LEN];   /* octet array: size 16 */
+
+#define PIN_CODE_LEN    16
+typedef UINT8 PIN_CODE[PIN_CODE_LEN];       /* Pin Code (upto 128 bits) MSB is 0 */
+typedef UINT8 *PIN_CODE_PTR;                /* Pointer to Pin Code */
+
+#define DEV_CLASS_LEN   3
+typedef UINT8 DEV_CLASS[DEV_CLASS_LEN];     /* Device class */
+typedef UINT8 *DEV_CLASS_PTR;               /* Pointer to Device class */
+
+#define EXT_INQ_RESP_LEN   3
+typedef UINT8 EXT_INQ_RESP[EXT_INQ_RESP_LEN];/* Extended Inquiry Response */
+typedef UINT8 *EXT_INQ_RESP_PTR;             /* Pointer to Extended Inquiry Response */
+
+#define BD_NAME_LEN     248
+typedef UINT8 BD_NAME[BD_NAME_LEN];         /* Device name */
+typedef UINT8 *BD_NAME_PTR;                 /* Pointer to Device name */
+
+#define BD_FEATURES_LEN 8
+typedef UINT8 BD_FEATURES[BD_FEATURES_LEN]; /* LMP features supported by device */
+
+#define BT_EVENT_MASK_LEN  8
+typedef UINT8 BT_EVENT_MASK[BT_EVENT_MASK_LEN];   /* Event Mask */
+
+#define LAP_LEN         3
+typedef UINT8 LAP[LAP_LEN];                 /* IAC as passed to Inquiry (LAP) */
+typedef UINT8 INQ_LAP[LAP_LEN];             /* IAC as passed to Inquiry (LAP) */
+
+#define RAND_NUM_LEN    16
+typedef UINT8 RAND_NUM[RAND_NUM_LEN];
+
+#define ACO_LEN         12
+typedef UINT8 ACO[ACO_LEN];                 /* Authenticated ciphering offset */
+
+#define COF_LEN         12
+typedef UINT8 COF[COF_LEN];                 /* ciphering offset number */
+
+typedef struct {
+    UINT8               qos_flags;          /* TBD */
+    UINT8               service_type;       /* see below */
+    UINT32              token_rate;         /* bytes/second */
+    UINT32              token_bucket_size;  /* bytes */
+    UINT32              peak_bandwidth;     /* bytes/second */
+    UINT32              latency;            /* microseconds */
+    UINT32              delay_variation;    /* microseconds */
+} FLOW_SPEC;
+
+/* Values for service_type */
+#define NO_TRAFFIC      0
+#define BEST_EFFORT     1
+#define GUARANTEED      2
+
+/* Service class of the CoD */
+#define SERV_CLASS_NETWORKING               (1 << 1)
+#define SERV_CLASS_RENDERING                (1 << 2)
+#define SERV_CLASS_CAPTURING                (1 << 3)
+#define SERV_CLASS_OBJECT_TRANSFER          (1 << 4)
+#define SERV_CLASS_OBJECT_AUDIO             (1 << 5)
+#define SERV_CLASS_OBJECT_TELEPHONY         (1 << 6)
+#define SERV_CLASS_OBJECT_INFORMATION       (1 << 7)
+
+/* Second byte */
+#define SERV_CLASS_LIMITED_DISC_MODE        (0x20)
+
+/* Field size definitions. Note that byte lengths are rounded up. */
+#define ACCESS_CODE_BIT_LEN             72
+#define ACCESS_CODE_BYTE_LEN            9
+#define SHORTENED_ACCESS_CODE_BIT_LEN   68
+
+typedef UINT8 ACCESS_CODE[ACCESS_CODE_BYTE_LEN];
+
+#define SYNTH_TX                1           /* want synth code to TRANSMIT at this freq */
+#define SYNTH_RX                2           /* want synth code to RECEIVE at this freq */
+
+#define SYNC_REPS 1             /* repeats of sync word transmitted to start of burst */
+
+/* Bluetooth CLK27 */
+#define BT_CLK27            (2 << 26)
+
+/* Bluetooth CLK12 is 1.28 sec */
+#define BT_CLK12_TO_MS(x)    ((x) * 1280)
+#define BT_MS_TO_CLK12(x)    ((x) / 1280)
+#define BT_CLK12_TO_SLOTS(x) ((x) << 11)
+
+/* Bluetooth CLK is 0.625 msec */
+#define BT_CLK_TO_MS(x)      (((x) * 5 + 3) / 8)
+#define BT_MS_TO_CLK(x)      (((x) * 8 + 2) / 5)
+
+#define BT_CLK_TO_MICROSECS(x)  (((x) * 5000 + 3) / 8)
+#define BT_MICROSECS_TO_CLK(x)  (((x) * 8 + 2499) / 5000)
+
+/* Maximum UUID size - 16 bytes, and structure to hold any type of UUID. */
+#define MAX_UUID_SIZE              16
+typedef struct
+{
+#define LEN_UUID_16     2
+#define LEN_UUID_32     4
+#define LEN_UUID_128    16
+
+    UINT16          len;
+
+    union
+    {
+        UINT16      uuid16;
+        UINT32      uuid32;
+        UINT8       uuid128[MAX_UUID_SIZE];
+    } uu;
+
+} tBT_UUID;
+
+#define BT_EIR_FLAGS_TYPE                   0x01
+#define BT_EIR_MORE_16BITS_UUID_TYPE        0x02
+#define BT_EIR_COMPLETE_16BITS_UUID_TYPE    0x03
+#define BT_EIR_MORE_32BITS_UUID_TYPE        0x04
+#define BT_EIR_COMPLETE_32BITS_UUID_TYPE    0x05
+#define BT_EIR_MORE_128BITS_UUID_TYPE       0x06
+#define BT_EIR_COMPLETE_128BITS_UUID_TYPE   0x07
+#define BT_EIR_SHORTENED_LOCAL_NAME_TYPE    0x08
+#define BT_EIR_COMPLETE_LOCAL_NAME_TYPE     0x09
+#define BT_EIR_TX_POWER_LEVEL_TYPE          0x0A
+#define BT_EIR_OOB_BD_ADDR_TYPE             0x0C
+#define BT_EIR_OOB_COD_TYPE                 0x0D
+#define BT_EIR_OOB_SSP_HASH_C_TYPE          0x0E
+#define BT_EIR_OOB_SSP_RAND_R_TYPE          0x0F
+#define BT_EIR_MANUFACTURER_SPECIFIC_TYPE   0xFF
+
+#define BT_OOB_COD_SIZE            3
+#define BT_OOB_HASH_C_SIZE         16
+#define BT_OOB_RAND_R_SIZE         16
+
+/* Broadcom proprietary UUIDs and reserved PSMs
+**
+** The lowest 4 bytes byte of the UUID or GUID depends on the feature. Typically,
+** the value of those bytes will be the PSM or SCN, but it is up to the features.
+*/
+#define BRCM_PROPRIETARY_UUID_BASE  0xDA, 0x23, 0x41, 0x02, 0xA3, 0xBB, 0xC1, 0x71, 0xBA, 0x09, 0x6f, 0x21
+#define BRCM_PROPRIETARY_GUID_BASE  0xda23, 0x4102, 0xa3, 0xbb, 0xc1, 0x71, 0xba, 0x09, 0x6f, 0x21
+
+/* We will not allocate a PSM in the reserved range to 3rd party apps
+*/
+#define BRCM_RESERVED_PSM_START	    0x5AE1
+#define BRCM_RESERVED_PSM_END	    0x5AFF
+
+#define BRCM_UTILITY_SERVICE_PSM    0x5AE1
+#define BRCM_MATCHER_PSM            0x5AE3
+
+/* Connection statistics
+*/
+
+/* Structure to hold connection stats */
+#ifndef BT_CONN_STATS_DEFINED
+#define BT_CONN_STATS_DEFINED
+
+/* These bits are used in the bIsConnected field */
+#define BT_CONNECTED_USING_BREDR   1
+#define BT_CONNECTED_USING_AMP     2
+
+typedef struct
+{
+    UINT32   is_connected;
+    INT32    rssi;
+    UINT32   bytes_sent;
+    UINT32   bytes_rcvd;
+    UINT32   duration;
+} tBT_CONN_STATS;
+
+#endif
+
+
+/*****************************************************************************
+**                          Low Energy definitions
+**
+** Address types
+*/
+#define BLE_ADDR_PUBLIC         0x00
+#define BLE_ADDR_RANDOM         0x01
+#define BLE_ADDR_TYPE_MASK      (BLE_ADDR_RANDOM | BLE_ADDR_PUBLIC)
+typedef UINT8 tBLE_ADDR_TYPE;
+
+#define BLE_ADDR_IS_STATIC(x)   ((x[0] & 0xC0) == 0xC0)
+
+typedef struct
+{
+    tBLE_ADDR_TYPE      type;
+    BD_ADDR             bda;
+} tBLE_BD_ADDR;
+
+/* Device Types
+*/
+#define BT_DEVICE_TYPE_BREDR   0x01
+#define BT_DEVICE_TYPE_BLE     0x02
+#define BT_DEVICE_TYPE_DUMO    0x03
+typedef UINT8 tBT_DEVICE_TYPE;
+/*****************************************************************************/
+
+
+/* Define trace levels */
+#define BT_TRACE_LEVEL_NONE    0          /* No trace messages to be generated    */
+#define BT_TRACE_LEVEL_ERROR   1          /* Error condition trace messages       */
+#define BT_TRACE_LEVEL_WARNING 2          /* Warning condition trace messages     */
+#define BT_TRACE_LEVEL_API     3          /* API traces                           */
+#define BT_TRACE_LEVEL_EVENT   4          /* Debug messages for events            */
+#define BT_TRACE_LEVEL_DEBUG   5          /* Full debug messages                  */
+#define BT_TRACE_LEVEL_VERBOSE 6          /* Verbose debug messages               */
+
+#define MAX_TRACE_LEVEL        6
+
+
+/* Define New Trace Type Definition */
+/* TRACE_CTRL_TYPE                  0x^^000000*/
+#define TRACE_CTRL_MASK             0xff000000
+#define TRACE_GET_CTRL(x)           ((((UINT32)(x)) & TRACE_CTRL_MASK) >> 24)
+
+#define TRACE_CTRL_GENERAL          0x00000000
+#define TRACE_CTRL_STR_RESOURCE     0x01000000
+#define TRACE_CTRL_SEQ_FLOW         0x02000000
+#define TRACE_CTRL_MAX_NUM          3
+
+/* LAYER SPECIFIC                   0x00^^0000*/
+#define TRACE_LAYER_MASK            0x00ff0000
+#define TRACE_GET_LAYER(x)          ((((UINT32)(x)) & TRACE_LAYER_MASK) >> 16)
+
+#define TRACE_LAYER_NONE            0x00000000
+#define TRACE_LAYER_USB             0x00010000
+#define TRACE_LAYER_SERIAL          0x00020000
+#define TRACE_LAYER_SOCKET          0x00030000
+#define TRACE_LAYER_RS232           0x00040000
+#define TRACE_LAYER_TRANS_MAX_NUM   5
+#define TRACE_LAYER_TRANS_ALL       0x007f0000
+#define TRACE_LAYER_LC              0x00050000
+#define TRACE_LAYER_LM              0x00060000
+#define TRACE_LAYER_HCI             0x00070000
+#define TRACE_LAYER_L2CAP           0x00080000
+#define TRACE_LAYER_RFCOMM          0x00090000
+#define TRACE_LAYER_SDP             0x000a0000
+#define TRACE_LAYER_TCS             0x000b0000
+#define TRACE_LAYER_OBEX            0x000c0000
+#define TRACE_LAYER_BTM             0x000d0000
+#define TRACE_LAYER_GAP             0x000e0000
+#define TRACE_LAYER_DUN             0x000f0000
+#define TRACE_LAYER_GOEP            0x00100000
+#define TRACE_LAYER_ICP             0x00110000
+#define TRACE_LAYER_HSP2            0x00120000
+#define TRACE_LAYER_SPP             0x00130000
+#define TRACE_LAYER_CTP             0x00140000
+#define TRACE_LAYER_BPP             0x00150000
+#define TRACE_LAYER_HCRP            0x00160000
+#define TRACE_LAYER_FTP             0x00170000
+#define TRACE_LAYER_OPP             0x00180000
+#define TRACE_LAYER_BTU             0x00190000
+#define TRACE_LAYER_GKI             0x001a0000
+#define TRACE_LAYER_BNEP            0x001b0000
+#define TRACE_LAYER_PAN             0x001c0000
+#define TRACE_LAYER_HFP             0x001d0000
+#define TRACE_LAYER_HID             0x001e0000
+#define TRACE_LAYER_BIP             0x001f0000
+#define TRACE_LAYER_AVP             0x00200000
+#define TRACE_LAYER_A2D             0x00210000
+#define TRACE_LAYER_SAP             0x00220000
+#define TRACE_LAYER_AMP             0x00230000
+#define TRACE_LAYER_MCA             0x00240000
+#define TRACE_LAYER_ATT             0x00250000
+#define TRACE_LAYER_SMP             0x00260000
+#define TRACE_LAYER_NFC             0x00270000
+#define TRACE_LAYER_NCI             0x00280000
+#define TRACE_LAYER_IDEP            0x00290000
+#define TRACE_LAYER_NDEP            0x002a0000
+#define TRACE_LAYER_LLCP            0x002b0000
+#define TRACE_LAYER_RW              0x002c0000
+#define TRACE_LAYER_CE              0x002d0000
+#define TRACE_LAYER_SNEP            0x002e0000
+#define TRACE_LAYER_NDEF            0x002f0000
+#define TRACE_LAYER_NFA             0x00300000
+
+#define TRACE_LAYER_MAX_NUM         0x0031
+
+
+/* TRACE_ORIGINATOR                 0x0000^^00*/
+#define TRACE_ORG_MASK              0x0000ff00
+#define TRACE_GET_ORG(x)            ((((UINT32)(x)) & TRACE_ORG_MASK) >> 8)
+
+#define TRACE_ORG_STACK             0x00000000
+#define TRACE_ORG_HCI_TRANS         0x00000100
+#define TRACE_ORG_PROTO_DISP        0x00000200
+#define TRACE_ORG_RPC               0x00000300
+#define TRACE_ORG_GKI               0x00000400
+#define TRACE_ORG_APPL              0x00000500
+#define TRACE_ORG_SCR_WRAPPER       0x00000600
+#define TRACE_ORG_SCR_ENGINE        0x00000700
+#define TRACE_ORG_USER_SCR          0x00000800
+#define TRACE_ORG_TESTER            0x00000900
+#define TRACE_ORG_MAX_NUM           10          /* 32-bit mask; must be < 32 */
+#define TRACE_LITE_ORG_MAX_NUM		6
+#define TRACE_ORG_ALL               0x03ff
+#define TRACE_ORG_RPC_TRANS         0x04
+
+#define TRACE_ORG_REG               0x00000909
+#define TRACE_ORG_REG_SUCCESS       0x0000090a
+
+/* TRACE_TYPE                       0x000000^^*/
+#define TRACE_TYPE_MASK             0x000000ff
+#define TRACE_GET_TYPE(x)           (((UINT32)(x)) & TRACE_TYPE_MASK)
+
+#define TRACE_TYPE_ERROR            0x00000000
+#define TRACE_TYPE_WARNING          0x00000001
+#define TRACE_TYPE_API              0x00000002
+#define TRACE_TYPE_EVENT            0x00000003
+#define TRACE_TYPE_DEBUG            0x00000004
+#define TRACE_TYPE_STACK_ONLY_MAX   TRACE_TYPE_DEBUG
+#define TRACE_TYPE_TX               0x00000005
+#define TRACE_TYPE_RX               0x00000006
+#define TRACE_TYPE_DEBUG_ASSERT     0x00000007
+#define TRACE_TYPE_GENERIC          0x00000008
+#define TRACE_TYPE_REG              0x00000009
+#define TRACE_TYPE_REG_SUCCESS      0x0000000a
+#define TRACE_TYPE_CMD_TX           0x0000000b
+#define TRACE_TYPE_EVT_TX           0x0000000c
+#define TRACE_TYPE_ACL_TX           0x0000000d
+#define TRACE_TYPE_CMD_RX           0x0000000e
+#define TRACE_TYPE_EVT_RX           0x0000000f
+#define TRACE_TYPE_ACL_RX           0x00000010
+#define TRACE_TYPE_TARGET_TRACE     0x00000011
+#define TRACE_TYPE_SCO_TX           0x00000012
+#define TRACE_TYPE_SCO_RX           0x00000013
+
+
+#define TRACE_TYPE_MAX_NUM          20
+#define TRACE_TYPE_ALL              0xffff
+
+/* Define color for script type */
+#define SCR_COLOR_DEFAULT       0
+#define SCR_COLOR_TYPE_COMMENT  1
+#define SCR_COLOR_TYPE_COMMAND  2
+#define SCR_COLOR_TYPE_EVENT    3
+#define SCR_COLOR_TYPE_SELECT   4
+
+/* Define protocol trace flag values */
+#define SCR_PROTO_TRACE_HCI_SUMMARY 0x00000001
+#define SCR_PROTO_TRACE_HCI_DATA    0x00000002
+#define SCR_PROTO_TRACE_L2CAP       0x00000004
+#define SCR_PROTO_TRACE_RFCOMM      0x00000008
+#define SCR_PROTO_TRACE_SDP         0x00000010
+#define SCR_PROTO_TRACE_TCS         0x00000020
+#define SCR_PROTO_TRACE_OBEX        0x00000040
+#define SCR_PROTO_TRACE_OAPP        0x00000080 /* OBEX Application Profile */
+#define SCR_PROTO_TRACE_AMP         0x00000100
+#define SCR_PROTO_TRACE_BNEP        0x00000200
+#define SCR_PROTO_TRACE_AVP         0x00000400
+#define SCR_PROTO_TRACE_MCA         0x00000800
+#define SCR_PROTO_TRACE_ATT         0x00001000
+#define SCR_PROTO_TRACE_SMP         0x00002000
+#define SCR_PROTO_TRACE_NCI         0x00004000
+#define SCR_PROTO_TRACE_DEP         0x00008000
+#define SCR_PROTO_TRACE_LLCP        0x00010000
+#define SCR_PROTO_TRACE_NDEF        0x00020000
+#define SCR_PROTO_TRACE_TAGS        0x00040000
+#define SCR_PROTO_TRACE_ALL         0x0007ffff
+#define SCR_PROTO_TRACE_HCI_LOGGING_VSE 0x0800 /* Brcm vs event for logmsg and protocol traces */
+
+#define MAX_SCRIPT_TYPE             5
+
+#define TCS_PSM_INTERCOM        5
+#define TCS_PSM_CORDLESS        7
+#define BT_PSM_BNEP             0x000F
+/* Define PSMs HID uses */
+#define HID_PSM_CONTROL         0x0011
+#define HID_PSM_INTERRUPT       0x0013
+
+/* Define a function for logging */
+typedef void (BT_LOG_FUNC) (int trace_type, const char *fmt_str, ...);
+
+#endif
+
diff --git a/stack/include/btm_api.h b/stack/include/btm_api.h
new file mode 100644
index 0000000..09bb749
--- /dev/null
+++ b/stack/include/btm_api.h
@@ -0,0 +1,4556 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the Bluetooth Manager (BTM) API function external
+ *  definitions.
+ *
+ ******************************************************************************/
+#ifndef BTM_API_H
+#define BTM_API_H
+
+#include "bt_target.h"
+#include "sdp_api.h"
+#include "hcidefs.h"
+
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+#include "smp_api.h"
+#endif
+/*****************************************************************************
+**  DEVICE CONTROL and COMMON
+*****************************************************************************/
+/*****************************
+**  Device Control Constants
+******************************/
+/* Maximum number of bytes allowed for vendor specific command parameters */
+#define BTM_MAX_VENDOR_SPECIFIC_LEN  HCI_COMMAND_SIZE
+
+/* BTM application return status codes */
+enum
+{
+    BTM_SUCCESS = 0,                    /* 0  Command succeeded                 */
+    BTM_CMD_STARTED,                    /* 1  Command started OK.               */
+    BTM_BUSY,                           /* 2  Device busy with another command  */
+    BTM_NO_RESOURCES,                   /* 3  No resources to issue command     */
+    BTM_MODE_UNSUPPORTED,               /* 4  Request for 1 or more unsupported modes */
+    BTM_ILLEGAL_VALUE,                  /* 5  Illegal parameter value           */
+    BTM_WRONG_MODE,                     /* 6  Device in wrong mode for request  */
+    BTM_UNKNOWN_ADDR,                   /* 7  Unknown remote BD address         */
+    BTM_DEVICE_TIMEOUT,                 /* 8  Device timeout                    */
+    BTM_BAD_VALUE_RET,                  /* 9  A bad value was received from HCI */
+    BTM_ERR_PROCESSING,                 /* 10 Generic error                     */
+    BTM_NOT_AUTHORIZED,                 /* 11 Authorization failed              */
+    BTM_DEV_RESET,                      /* 12 Device has been reset             */
+    BTM_CMD_STORED,                     /* 13 request is stored in control block */
+    BTM_ILLEGAL_ACTION,                 /* 14 state machine gets illegal command */
+    BTM_DELAY_CHECK,                    /* 15 delay the check on encryption */
+    BTM_SCO_BAD_LENGTH,                 /* 16 Bad SCO over HCI data length */
+    BTM_SUCCESS_NO_SECURITY,            /* 17 security passed, no security set  */
+    BTM_FAILED_ON_SECURITY ,             /* 18 security failed                   */
+    BTM_REPEATED_ATTEMPTS               /* 19 repeated attempts for LE security requests */
+};
+typedef UINT8 tBTM_STATUS;
+
+/*************************
+**  Device Control Types
+**************************/
+#define BTM_DEVICE_ROLE_BR      0x01
+#define BTM_DEVICE_ROLE_DUAL    0x02
+#define BTM_MAX_DEVICE_ROLE     BTM_DEVICE_ROLE_DUAL
+typedef UINT8 tBTM_DEVICE_ROLE;
+
+/* Device name of peer (may be truncated to save space in BTM database) */
+typedef UINT8 tBTM_BD_NAME[BTM_MAX_REM_BD_NAME_LEN + 1];
+
+/* Structure returned with local version information */
+typedef struct
+{
+    UINT8       hci_version;
+    UINT16      hci_revision;
+    UINT8       lmp_version;
+    UINT16      manufacturer;
+    UINT16      lmp_subversion;
+} tBTM_VERSION_INFO;
+
+/* Structure returned with Vendor Specific Command complete callback */
+typedef struct
+{
+    UINT16  opcode;
+    UINT16  param_len;
+    UINT8   *p_param_buf;
+} tBTM_VSC_CMPL;
+
+#define  BTM_VSC_CMPL_DATA_SIZE  (BTM_MAX_VENDOR_SPECIFIC_LEN + sizeof(tBTM_VSC_CMPL))
+/**************************************************
+**  Device Control and General Callback Functions
+***************************************************/
+/* Callback function for when device status changes. Appl must poll for
+** what the new state is (BTM_IsDeviceUp). The event occurs whenever the stack
+** has detected that the controller status has changed. This asynchronous event
+** is enabled/disabled by calling BTM_RegisterForDeviceStatusNotif().
+*/
+enum
+{
+    BTM_DEV_STATUS_UP,
+    BTM_DEV_STATUS_DOWN,
+    BTM_DEV_STATUS_CMD_TOUT
+};
+
+typedef UINT8 tBTM_DEV_STATUS;
+
+
+typedef void (tBTM_DEV_STATUS_CB) (tBTM_DEV_STATUS status);
+
+
+/* Callback function for when a vendor specific event occurs. The length and
+** array of returned parameter bytes are included. This asynchronous event
+** is enabled/disabled by calling BTM_RegisterForVSEvents().
+*/
+typedef void (tBTM_VS_EVT_CB) (UINT8 len, UINT8 *p);
+
+
+/* General callback function for notifying an application that a synchronous
+** BTM function is complete. The pointer contains the address of any returned data.
+*/
+typedef void (tBTM_CMPL_CB) (void *p1);
+
+/* VSC callback function for notifying an application that a synchronous
+** BTM function is complete. The pointer contains the address of any returned data.
+*/
+typedef void (tBTM_VSC_CMPL_CB) (tBTM_VSC_CMPL *p1);
+
+/* Callback for apps to check connection and inquiry filters.
+** Parameters are the BD Address of remote and the Dev Class of remote.
+** If the app returns none zero, the connection or inquiry result will be dropped.
+*/
+typedef UINT8 (tBTM_FILTER_CB) (BD_ADDR bd_addr, DEV_CLASS dc);
+
+/*****************************************************************************
+**  DEVICE DISCOVERY - Inquiry, Remote Name, Discovery, Class of Device
+*****************************************************************************/
+/*******************************
+**  Device Discovery Constants
+********************************/
+/* Discoverable modes */
+#define BTM_NON_DISCOVERABLE        0
+#define BTM_LIMITED_DISCOVERABLE    1
+#define BTM_GENERAL_DISCOVERABLE    2
+#define BTM_DISCOVERABLE_MASK       (BTM_LIMITED_DISCOVERABLE|BTM_GENERAL_DISCOVERABLE)
+#define BTM_MAX_DISCOVERABLE        BTM_GENERAL_DISCOVERABLE
+/* high byte for BLE Discoverable modes */
+#define BTM_BLE_NON_DISCOVERABLE        0x0000
+#define BTM_BLE_LIMITED_DISCOVERABLE    0x0100
+#define BTM_BLE_GENERAL_DISCOVERABLE    0x0200
+#define BTM_BLE_MAX_DISCOVERABLE        BTM_BLE_GENERAL_DISCOVERABLE
+#define BTM_BLE_DISCOVERABLE_MASK       (BTM_BLE_NON_DISCOVERABLE|BTM_BLE_LIMITED_DISCOVERABLE|BTM_BLE_GENERAL_DISCOVERABLE)
+
+/* Connectable modes */
+#define BTM_NON_CONNECTABLE         0
+#define BTM_CONNECTABLE             1
+#define BTM_CONNECTABLE_MASK        (BTM_NON_CONNECTABLE | BTM_CONNECTABLE)
+/* high byte for BLE Connectable modes */
+#define BTM_BLE_NON_CONNECTABLE      0x0000
+#define BTM_BLE_CONNECTABLE          0x0100
+#define BTM_BLE_MAX_CONNECTABLE      BTM_BLE_CONNECTABLE
+#define BTM_BLE_CONNECTABLE_MASK    (BTM_BLE_NON_CONNECTABLE | BTM_BLE_CONNECTABLE)
+
+/* Inquiry modes
+ * Note: These modes are associated with the inquiry active values (BTM_*ACTIVE) */
+#define BTM_GENERAL_INQUIRY         0
+#define BTM_LIMITED_INQUIRY         1
+#define BTM_BR_INQUIRY_MASK         0x0f
+/* high byte of inquiry mode for BLE inquiry mode */
+#define BTM_BLE_INQUIRY_NONE         0x00
+#define BTM_BLE_GENERAL_INQUIRY      0x10
+#define BTM_BLE_LIMITED_INQUIRY      0x20
+#define BTM_BLE_INQUIRY_MASK         (BTM_BLE_GENERAL_INQUIRY|BTM_BLE_LIMITED_INQUIRY)
+
+/* BTM_IsInquiryActive return values (Bit Mask)
+ * Note: These bit masks are associated with the inquiry modes (BTM_*_INQUIRY) */
+#define BTM_INQUIRY_INACTIVE        0x0     /* no inquiry in progress */
+#define BTM_GENERAL_INQUIRY_ACTIVE  0x1     /* a general inquiry is in progress */
+#define BTM_LIMITED_INQUIRY_ACTIVE  0x2     /* a limited inquiry is in progress */
+#define BTM_PERIODIC_INQUIRY_ACTIVE 0x8     /* a periodic inquiry is active */
+#define BTM_SSP_INQUIRY_ACTIVE      0x4     /* SSP is active, so inquiry is disallowed (work around for FW bug) */
+
+/* Define scan types */
+#define BTM_SCAN_TYPE_STANDARD      0
+#define BTM_SCAN_TYPE_INTERLACED    1       /* 1.2 devices only */
+
+/* Define inquiry results mode */
+#define BTM_INQ_RESULT_STANDARD     0
+#define BTM_INQ_RESULT_WITH_RSSI    1
+#define BTM_INQ_RESULT_EXTENDED     2
+
+#define BTM_INQ_RES_IGNORE_RSSI     0x7f    /* RSSI value not supplied (ignore it) */
+
+/* Inquiry Filter Condition types (see tBTM_INQ_PARMS) */
+#define BTM_CLR_INQUIRY_FILTER          0                   /* Inquiry Filtering is turned off */
+#define BTM_FILTER_COND_DEVICE_CLASS    HCI_FILTER_COND_DEVICE_CLASS /* Filter on device class */
+#define BTM_FILTER_COND_BD_ADDR         HCI_FILTER_COND_BD_ADDR /* Filter on device addr */
+
+/* State of the remote name retrieval during inquiry operations.
+** Used in the tBTM_INQ_INFO structure, and returned in the
+** BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext functions.
+** The name field is valid when the state returned is
+** BTM_INQ_RMT_NAME_DONE */
+#define BTM_INQ_RMT_NAME_EMPTY      0
+#define BTM_INQ_RMT_NAME_PENDING    1
+#define BTM_INQ_RMT_NAME_DONE       2
+#define BTM_INQ_RMT_NAME_FAILED     3
+
+/*********************************
+ *** Class of Device constants ***
+ *********************************/
+#define BTM_FORMAT_TYPE_1   0x00
+
+/****************************
+** minor device class field
+*****************************/
+
+/* 0x00 is used as unclassified for all minor device classes */
+#define BTM_COD_MINOR_UNCLASSIFIED          0x00
+
+/* minor device class field for Computer Major Class */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+#define BTM_COD_MINOR_DESKTOP_WORKSTATION   0x04
+#define BTM_COD_MINOR_SERVER_COMPUTER       0x08
+#define BTM_COD_MINOR_LAPTOP                0x0C
+#define BTM_COD_MINOR_HANDHELD_PC_PDA       0x10    /* clam shell */
+#define BTM_COD_MINOR_PALM_SIZE_PC_PDA      0x14
+#define BTM_COD_MINOR_WEARABLE_COMPUTER     0x18    /* watch sized */
+
+/* minor device class field for Phone Major Class */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+#define BTM_COD_MINOR_CELLULAR              0x04
+#define BTM_COD_MINOR_CORDLESS              0x08
+#define BTM_COD_MINOR_SMART_PHONE           0x0C
+#define BTM_COD_MINOR_WIRED_MDM_V_GTWY      0x10 /* wired modem or voice gatway */
+#define BTM_COD_MINOR_ISDN_ACCESS           0x14
+
+/* minor device class field for LAN Access Point Major Class */
+/* Load Factor Field bit 5-7 */
+#define BTM_COD_MINOR_FULLY_AVAILABLE       0x00
+#define BTM_COD_MINOR_1_17_UTILIZED         0x20
+#define BTM_COD_MINOR_17_33_UTILIZED        0x40
+#define BTM_COD_MINOR_33_50_UTILIZED        0x60
+#define BTM_COD_MINOR_50_67_UTILIZED        0x80
+#define BTM_COD_MINOR_67_83_UTILIZED        0xA0
+#define BTM_COD_MINOR_83_99_UTILIZED        0xC0
+#define BTM_COD_MINOR_NO_SERVICE_AVAILABLE  0xE0
+/* sub-Field bit 2-4 */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+
+/* minor device class field for Audio/Video Major Class */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+#define BTM_COD_MINOR_CONFM_HEADSET         0x04
+#define BTM_COD_MINOR_CONFM_HANDSFREE       0x08
+#define BTM_COD_MINOR_MICROPHONE            0x10
+#define BTM_COD_MINOR_LOUDSPEAKER           0x14
+#define BTM_COD_MINOR_HEADPHONES            0x18
+#define BTM_COD_MINOR_PORTABLE_AUDIO        0x1C
+#define BTM_COD_MINOR_CAR_AUDIO             0x20
+#define BTM_COD_MINOR_SET_TOP_BOX           0x24
+#define BTM_COD_MINOR_HIFI_AUDIO            0x28
+#define BTM_COD_MINOR_VCR                   0x2C
+#define BTM_COD_MINOR_VIDEO_CAMERA          0x30
+#define BTM_COD_MINOR_CAMCORDER             0x34
+#define BTM_COD_MINOR_VIDEO_MONITOR         0x38
+#define BTM_COD_MINOR_VIDDISP_LDSPKR        0x3C
+#define BTM_COD_MINOR_VIDEO_CONFERENCING    0x40
+#define BTM_COD_MINOR_GAMING_TOY            0x48
+
+/* minor device class field for Peripheral Major Class */
+/* Bits 6-7 independently specify mouse, keyboard, or combo mouse/keyboard */
+#define BTM_COD_MINOR_KEYBOARD              0x40
+#define BTM_COD_MINOR_POINTING              0x80
+#define BTM_COD_MINOR_COMBO                 0xC0
+/* Bits 2-5 OR'd with selection from bits 6-7 */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+#define BTM_COD_MINOR_JOYSTICK              0x04
+#define BTM_COD_MINOR_GAMEPAD               0x08
+#define BTM_COD_MINOR_REMOTE_CONTROL        0x0C
+#define BTM_COD_MINOR_SENSING_DEVICE        0x10
+#define BTM_COD_MINOR_DIGITIZING_TABLET     0x14
+#define BTM_COD_MINOR_CARD_READER           0x18    /* e.g. SIM card reader */
+#define BTM_COD_MINOR_DIGITAL_PAN           0x1C
+#define BTM_COD_MINOR_HAND_SCANNER          0x20
+#define BTM_COD_MINOR_HAND_GESTURAL_INPUT   0x24
+
+/* minor device class field for Imaging Major Class */
+/* Bits 5-7 independently specify display, camera, scanner, or printer */
+#define BTM_COD_MINOR_DISPLAY               0x10
+#define BTM_COD_MINOR_CAMERA                0x20
+#define BTM_COD_MINOR_SCANNER               0x40
+#define BTM_COD_MINOR_PRINTER               0x80
+/* Bits 2-3 Reserved */
+/* #define BTM_COD_MINOR_UNCLASSIFIED       0x00    */
+
+/* minor device class field for Wearable Major Class */
+/* Bits 2-7 meaningful    */
+#define BTM_COD_MINOR_WRIST_WATCH           0x04
+#define BTM_COD_MINOR_PAGER                 0x08
+#define BTM_COD_MINOR_JACKET                0x0C
+#define BTM_COD_MINOR_HELMET                0x10
+#define BTM_COD_MINOR_GLASSES               0x14
+
+/* minor device class field for Toy Major Class */
+/* Bits 2-7 meaningful    */
+#define BTM_COD_MINOR_ROBOT                 0x04
+#define BTM_COD_MINOR_VEHICLE               0x08
+#define BTM_COD_MINOR_DOLL_ACTION_FIGURE    0x0C
+#define BTM_COD_MINOR_CONTROLLER            0x10
+#define BTM_COD_MINOR_GAME                  0x14
+
+/* minor device class field for Health Major Class */
+/* Bits 2-7 meaningful    */
+#define BTM_COD_MINOR_BLOOD_MONITOR         0x04
+#define BTM_COD_MINOR_THERMOMETER           0x08
+#define BTM_COD_MINOR_WEIGHING_SCALE        0x0C
+#define BTM_COD_MINOR_GLUCOSE_METER         0x10
+#define BTM_COD_MINOR_PULSE_OXIMETER        0x14
+#define BTM_COD_MINOR_HEART_PULSE_MONITOR   0x18
+#define BTM_COD_MINOR_HEALTH_DATA_DISPLAY   0x1C
+#define BTM_COD_MINOR_STEP_COUNTER          0x20
+#define BTM_COD_MINOR_BODY_COM_ANALYZER     0x24
+#define BTM_COD_MINOR_PEAK_FLOW_MONITOR     0x28
+#define BTM_COD_MINOR_MEDICATION_MONITOR    0x2C
+#define BTM_COD_MINOR_KNEE_PROSTHESIS       0x30
+#define BTM_COD_MINOR_ANKLE_PROSTHESIS      0x34
+
+
+/***************************
+** major device class field
+****************************/
+#define BTM_COD_MAJOR_MISCELLANEOUS         0x00
+#define BTM_COD_MAJOR_COMPUTER              0x01
+#define BTM_COD_MAJOR_PHONE                 0x02
+#define BTM_COD_MAJOR_LAN_ACCESS_PT         0x03
+#define BTM_COD_MAJOR_AUDIO                 0x04
+#define BTM_COD_MAJOR_PERIPHERAL            0x05
+#define BTM_COD_MAJOR_IMAGING               0x06
+#define BTM_COD_MAJOR_WEARABLE              0x07
+#define BTM_COD_MAJOR_TOY                   0x08
+#define BTM_COD_MAJOR_HEALTH                0x09
+#define BTM_COD_MAJOR_UNCLASSIFIED          0x1F
+
+/***************************
+** service class fields
+****************************/
+#define BTM_COD_SERVICE_LMTD_DISCOVER       0x0020
+#define BTM_COD_SERVICE_POSITIONING         0x0100
+#define BTM_COD_SERVICE_NETWORKING          0x0200
+#define BTM_COD_SERVICE_RENDERING           0x0400
+#define BTM_COD_SERVICE_CAPTURING           0x0800
+#define BTM_COD_SERVICE_OBJ_TRANSFER        0x1000
+#define BTM_COD_SERVICE_AUDIO               0x2000
+#define BTM_COD_SERVICE_TELEPHONY           0x4000
+#define BTM_COD_SERVICE_INFORMATION         0x8000
+
+/* class of device field macros */
+#define BTM_COD_FORMAT_TYPE(u8, pd)         {u8  = pd[2]&0x03;}
+#define BTM_COD_MINOR_CLASS(u8, pd)         {u8  = pd[2]&0xFC;}
+#define BTM_COD_MAJOR_CLASS(u8, pd)         {u8  = pd[1]&0x1F;}
+#define BTM_COD_SERVICE_CLASS(u16, pd)      {u16 = pd[0]; u16<<=8; u16 += pd[1]&0xE0;}
+
+/* to set the fields (assumes that format type is always 0) */
+#define FIELDS_TO_COD(pd, mn, mj, sv) {pd[2] = mn; pd[1] =              \
+                                       mj+ ((sv)&BTM_COD_SERVICE_CLASS_LO_B); \
+                                       pd[0] = (sv) >> 8;}
+
+/* the COD masks */
+#define BTM_COD_FORMAT_TYPE_MASK      0x03
+#define BTM_COD_MINOR_CLASS_MASK      0xFC
+#define BTM_COD_MAJOR_CLASS_MASK      0x1F
+#define BTM_COD_SERVICE_CLASS_LO_B    0x00E0
+#define BTM_COD_SERVICE_CLASS_MASK    0xFFE0
+
+
+/* BTM service definitions
+** Used for storing EIR data to bit mask
+*/
+#ifndef BTM_EIR_UUID_LKUP_TBL
+enum
+{
+    BTM_EIR_UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER,
+/*    BTM_EIR_UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR,   */
+/*    BTM_EIR_UUID_SERVCLASS_PUBLIC_BROWSE_GROUP,       */
+    BTM_EIR_UUID_SERVCLASS_SERIAL_PORT,
+    BTM_EIR_UUID_SERVCLASS_LAN_ACCESS_USING_PPP,
+    BTM_EIR_UUID_SERVCLASS_DIALUP_NETWORKING,
+    BTM_EIR_UUID_SERVCLASS_IRMC_SYNC,
+    BTM_EIR_UUID_SERVCLASS_OBEX_OBJECT_PUSH,
+    BTM_EIR_UUID_SERVCLASS_OBEX_FILE_TRANSFER,
+    BTM_EIR_UUID_SERVCLASS_IRMC_SYNC_COMMAND,
+    BTM_EIR_UUID_SERVCLASS_HEADSET,
+    BTM_EIR_UUID_SERVCLASS_CORDLESS_TELEPHONY,
+    BTM_EIR_UUID_SERVCLASS_AUDIO_SOURCE,
+    BTM_EIR_UUID_SERVCLASS_AUDIO_SINK,
+    BTM_EIR_UUID_SERVCLASS_AV_REM_CTRL_TARGET,
+/*    BTM_EIR_UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION,    */
+    BTM_EIR_UUID_SERVCLASS_AV_REMOTE_CONTROL,
+/*    BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING,        */
+    BTM_EIR_UUID_SERVCLASS_INTERCOM,
+    BTM_EIR_UUID_SERVCLASS_FAX,
+    BTM_EIR_UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY,
+/*    BTM_EIR_UUID_SERVCLASS_WAP,                       */
+/*    BTM_EIR_UUID_SERVCLASS_WAP_CLIENT,                */
+    BTM_EIR_UUID_SERVCLASS_PANU,
+    BTM_EIR_UUID_SERVCLASS_NAP,
+    BTM_EIR_UUID_SERVCLASS_GN,
+    BTM_EIR_UUID_SERVCLASS_DIRECT_PRINTING,
+/*    BTM_EIR_UUID_SERVCLASS_REFERENCE_PRINTING,        */
+    BTM_EIR_UUID_SERVCLASS_IMAGING,
+    BTM_EIR_UUID_SERVCLASS_IMAGING_RESPONDER,
+    BTM_EIR_UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE,
+    BTM_EIR_UUID_SERVCLASS_IMAGING_REF_OBJECTS,
+    BTM_EIR_UUID_SERVCLASS_HF_HANDSFREE,
+    BTM_EIR_UUID_SERVCLASS_AG_HANDSFREE,
+    BTM_EIR_UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE,
+/*    BTM_EIR_UUID_SERVCLASS_REFLECTED_UI,              */
+    BTM_EIR_UUID_SERVCLASS_BASIC_PRINTING,
+    BTM_EIR_UUID_SERVCLASS_PRINTING_STATUS,
+    BTM_EIR_UUID_SERVCLASS_HUMAN_INTERFACE,
+    BTM_EIR_UUID_SERVCLASS_CABLE_REPLACEMENT,
+    BTM_EIR_UUID_SERVCLASS_HCRP_PRINT,
+    BTM_EIR_UUID_SERVCLASS_HCRP_SCAN,
+/*    BTM_EIR_UUID_SERVCLASS_COMMON_ISDN_ACCESS,        */
+/*    BTM_EIR_UUID_SERVCLASS_VIDEO_CONFERENCING_GW,     */
+/*    BTM_EIR_UUID_SERVCLASS_UDI_MT,                    */
+/*    BTM_EIR_UUID_SERVCLASS_UDI_TA,                    */
+/*    BTM_EIR_UUID_SERVCLASS_VCP,                       */
+    BTM_EIR_UUID_SERVCLASS_SAP,
+    BTM_EIR_UUID_SERVCLASS_PBAP_PCE,
+    BTM_EIR_UUID_SERVCLASS_PBAP_PSE,
+/*    BTM_EIR_UUID_SERVCLASS_TE_PHONE_ACCESS,           */
+/*    BTM_EIR_UUID_SERVCLASS_ME_PHONE_ACCESS,           */
+    BTM_EIR_UUID_SERVCLASS_PHONE_ACCESS,
+    BTM_EIR_UUID_SERVCLASS_HEADSET_HS,
+    BTM_EIR_UUID_SERVCLASS_PNP_INFORMATION,
+/*    BTM_EIR_UUID_SERVCLASS_GENERIC_NETWORKING,        */
+/*    BTM_EIR_UUID_SERVCLASS_GENERIC_FILETRANSFER,      */
+/*    BTM_EIR_UUID_SERVCLASS_GENERIC_AUDIO,             */
+/*    BTM_EIR_UUID_SERVCLASS_GENERIC_TELEPHONY,         */
+/*    BTM_EIR_UUID_SERVCLASS_UPNP_SERVICE,              */
+/*    BTM_EIR_UUID_SERVCLASS_UPNP_IP_SERVICE,           */
+/*    BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_PAN,          */
+/*    BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_LAP,          */
+/*    BTM_EIR_UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP,        */
+    BTM_EIR_UUID_SERVCLASS_VIDEO_SOURCE,
+    BTM_EIR_UUID_SERVCLASS_VIDEO_SINK,
+/*    BTM_EIR_UUID_SERVCLASS_VIDEO_DISTRIBUTION         */
+/*    BTM_EIR_UUID_SERVCLASS_HDP_PROFILE                */
+    BTM_EIR_UUID_SERVCLASS_MESSAGE_ACCESS,
+    BTM_EIR_UUID_SERVCLASS_MESSAGE_NOTIFICATION,
+    BTM_EIR_UUID_SERVCLASS_HDP_SOURCE,
+    BTM_EIR_UUID_SERVCLASS_HDP_SINK,
+    BTM_EIR_MAX_SERVICES
+};
+#endif /* BTM_EIR_UUID_LKUP_TBL */
+
+/* search result in EIR of inquiry database */
+#define BTM_EIR_FOUND           0
+#define BTM_EIR_NOT_FOUND       1
+#define BTM_EIR_UNKNOWN         2
+
+typedef UINT8 tBTM_EIR_SEARCH_RESULT;
+
+#define BTM_EIR_FLAGS_TYPE                  HCI_EIR_FLAGS_TYPE                  /* 0x01 */
+#define BTM_EIR_MORE_16BITS_UUID_TYPE       HCI_EIR_MORE_16BITS_UUID_TYPE       /* 0x02 */
+#define BTM_EIR_COMPLETE_16BITS_UUID_TYPE   HCI_EIR_COMPLETE_16BITS_UUID_TYPE   /* 0x03 */
+#define BTM_EIR_MORE_32BITS_UUID_TYPE       HCI_EIR_MORE_32BITS_UUID_TYPE       /* 0x04 */
+#define BTM_EIR_COMPLETE_32BITS_UUID_TYPE   HCI_EIR_COMPLETE_32BITS_UUID_TYPE   /* 0x05 */
+#define BTM_EIR_MORE_128BITS_UUID_TYPE      HCI_EIR_MORE_128BITS_UUID_TYPE      /* 0x06 */
+#define BTM_EIR_COMPLETE_128BITS_UUID_TYPE  HCI_EIR_COMPLETE_128BITS_UUID_TYPE  /* 0x07 */
+#define BTM_EIR_SHORTENED_LOCAL_NAME_TYPE   HCI_EIR_SHORTENED_LOCAL_NAME_TYPE   /* 0x08 */
+#define BTM_EIR_COMPLETE_LOCAL_NAME_TYPE    HCI_EIR_COMPLETE_LOCAL_NAME_TYPE    /* 0x09 */
+#define BTM_EIR_TX_POWER_LEVEL_TYPE         HCI_EIR_TX_POWER_LEVEL_TYPE         /* 0x0A */
+#define BTM_EIR_MANUFACTURER_SPECIFIC_TYPE  HCI_EIR_MANUFACTURER_SPECIFIC_TYPE  /* 0xFF */
+
+/* the following EIR tags are defined to OOB, not regular EIR data */
+#define BTM_EIR_OOB_BD_ADDR_TYPE            HCI_EIR_OOB_BD_ADDR_TYPE    /* 6 bytes */
+#define BTM_EIR_OOB_COD_TYPE                HCI_EIR_OOB_COD_TYPE        /* 3 bytes */
+#define BTM_EIR_OOB_SSP_HASH_C_TYPE         HCI_EIR_OOB_SSP_HASH_C_TYPE /* 16 bytes */
+#define BTM_EIR_OOB_SSP_RAND_R_TYPE         HCI_EIR_OOB_SSP_RAND_R_TYPE /* 16 bytes */
+
+#define BTM_OOB_MANDATORY_SIZE      8   /* include 2 bytes length & 6 bytes bd_addr */
+#define BTM_OOB_DATA_LEN_SIZE       2
+#define BTM_OOB_BD_ADDR_SIZE        6
+#define BTM_OOB_COD_SIZE            BT_OOB_COD_SIZE
+#define BTM_OOB_HASH_C_SIZE         BT_OOB_HASH_C_SIZE
+#define BTM_OOB_RAND_R_SIZE         BT_OOB_RAND_R_SIZE
+
+
+#if BLE_INCLUDED == TRUE
+#define BTM_BLE_SEC_NONE                0
+#define BTM_BLE_SEC_ENCRYPT             1 /* encrypt the link using current key */
+#define BTM_BLE_SEC_ENCRYPT_NO_MITM     2
+#define BTM_BLE_SEC_ENCRYPT_MITM        3
+typedef UINT8   tBTM_BLE_SEC_ACT;
+#endif
+/************************************************************************************************
+** BTM Services MACROS handle array of UINT32 bits for more than 32 services
+*************************************************************************************************/
+/* Determine the number of UINT32's necessary for services */
+#define BTM_EIR_ARRAY_BITS          32          /* Number of bits in each array element */
+#define BTM_EIR_SERVICE_ARRAY_SIZE  (((UINT32)BTM_EIR_MAX_SERVICES / BTM_EIR_ARRAY_BITS) + \
+                                    (((UINT32)BTM_EIR_MAX_SERVICES % BTM_EIR_ARRAY_BITS) ? 1 : 0))
+
+/* MACRO to set the service bit mask in a bit stream */
+#define BTM_EIR_SET_SERVICE(p, service)  (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] |=  \
+                                    ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)))
+
+
+/* MACRO to clear the service bit mask in a bit stream */
+#define BTM_EIR_CLR_SERVICE(p, service)  (((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] &=  \
+                                    ~((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS)))
+
+/* MACRO to check the service bit mask in a bit stream */
+#define BTM_EIR_HAS_SERVICE(p, service)  ((((UINT32 *)(p))[(((UINT32)(service)) / BTM_EIR_ARRAY_BITS)] &  \
+                                    ((UINT32)1 << (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))) >> (((UINT32)(service)) % BTM_EIR_ARRAY_BITS))
+
+/* start of EIR in HCI buffer, 4 bytes = HCI Command(2) + Length(1) + FEC_Req(1) */
+#define BTM_HCI_EIR_OFFSET          (BT_HDR_SIZE + 4)
+
+/***************************
+**  Device Discovery Types
+****************************/
+/* Definitions of the parameters passed to BTM_StartInquiry and
+** BTM_SetPeriodicInquiryMode.
+*/
+typedef struct              /* contains the two device class condition fields */
+{
+    DEV_CLASS       dev_class;
+    DEV_CLASS       dev_class_mask;
+} tBTM_COD_COND;
+
+
+typedef union               /* contains the inquiry filter condition */
+{
+    BD_ADDR         bdaddr_cond;
+    tBTM_COD_COND   cod_cond;
+} tBTM_INQ_FILT_COND;
+
+
+typedef struct              /* contains the parameters passed to the inquiry functions */
+{
+    UINT8   mode;                       /* general or limited */
+    UINT8   duration;                   /* duration of the inquiry (1.28 sec increments) */
+    UINT8   max_resps;                  /* maximum number of responses to return */
+    BOOLEAN report_dup;                 /* report duplicated inquiry response with higher RSSI value */
+    UINT8   filter_cond_type;           /* new devices, BD ADDR, COD, or No filtering */
+    tBTM_INQ_FILT_COND  filter_cond;    /* filter value based on filter cond type */
+} tBTM_INQ_PARMS;
+
+#define BTM_INQ_RESULT_BR       0x01
+#define BTM_INQ_RESULT_BLE      0x02
+
+#if (BLE_INCLUDED == TRUE)
+#define BTM_BLE_EVT_CONN_ADV        0x00
+#define BTM_BLE_EVT_CONN_DIR_ADV    0x01
+#define BTM_BLE_EVT_DISC_ADV        0x02
+#define BTM_BLE_EVT_NON_CONN_ADV    0x03
+#define BTM_BLE_EVT_SCAN_RSP        0x04
+typedef UINT8 tBTM_BLE_EVT_TYPE;
+#endif
+
+/* These are the fields returned in each device's response to the inquiry.  It
+** is returned in the results callback if registered.
+*/
+typedef struct
+{
+    UINT16      clock_offset;
+    BD_ADDR     remote_bd_addr;
+    DEV_CLASS   dev_class;
+    UINT8       page_scan_rep_mode;
+    UINT8       page_scan_per_mode;
+    UINT8       page_scan_mode;
+    INT8        rssi;       /* Set to BTM_INQ_RES_IGNORE_RSSI if  not valid */
+#if (BTM_EIR_CLIENT_INCLUDED == TRUE)
+    UINT32      eir_uuid[BTM_EIR_SERVICE_ARRAY_SIZE];
+    BOOLEAN     eir_complete_list;
+#endif
+#if (BLE_INCLUDED == TRUE)
+    tBT_DEVICE_TYPE         device_type;
+    UINT8       inq_result_type;
+    UINT8       ble_addr_type;
+    tBTM_BLE_EVT_TYPE       ble_evt_type;
+    UINT8                   flag;
+#endif
+} tBTM_INQ_RESULTS;
+
+
+/* This is the inquiry response information held in its database by BTM, and available
+** to applications via BTM_InqDbRead, BTM_InqDbFirst, and BTM_InqDbNext.
+*/
+typedef struct
+{
+    tBTM_INQ_RESULTS    results;
+
+    BOOLEAN             appl_knows_rem_name;    /* set by application if it knows the remote name of the peer device.
+                                                   This is later used by application to determine if remote name request is
+                                                   required to be done. Having the flag here avoid duplicate store of inquiry results */
+
+
+#if (BTM_INQ_GET_REMOTE_NAME == TRUE || BLE_INCLUDED == TRUE)
+    UINT16          remote_name_len;
+    tBTM_BD_NAME    remote_name;
+    UINT8           remote_name_state;
+    UINT8           remote_name_type;
+#endif
+
+} tBTM_INQ_INFO;
+
+
+/* Structure returned with inquiry complete callback */
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       num_resp;       /* Number of results from the current inquiry */
+} tBTM_INQUIRY_CMPL;
+
+
+/* Structure returned with remote name  request */
+typedef struct
+{
+    UINT16      status;
+    UINT16      length;
+    BD_NAME     remote_bd_name;
+} tBTM_REMOTE_DEV_NAME;
+
+typedef struct
+{
+    UINT8   pcm_intf_rate;  /* PCM interface rate: 0: 128kbps, 1: 256 kbps;
+                                2:512 bps; 3: 1024kbps; 4: 2048kbps */
+    UINT8   frame_type;     /* frame type: 0: short; 1: long */
+    UINT8   sync_mode;      /* sync mode: 0: slave; 1: master */
+    UINT8   clock_mode;     /* clock mode: 0: slave; 1: master */
+
+}tBTM_SCO_PCM_PARAM;
+
+/****************************************
+**  Device Discovery Callback Functions
+*****************************************/
+/* Callback function for asynchronous notifications when the BTM inquiry DB
+** changes. First param is inquiry database, second is if added to or removed
+** from the inquiry database.
+*/
+typedef void (tBTM_INQ_DB_CHANGE_CB) (void *p1, BOOLEAN is_new);
+
+/* Callback function for notifications when the BTM gets inquiry response.
+** First param is inquiry results database, second is pointer of EIR.
+*/
+typedef void (tBTM_INQ_RESULTS_CB) (tBTM_INQ_RESULTS *p_inq_results, UINT8 *p_eir);
+
+/*****************************************************************************
+**  ACL CHANNEL MANAGEMENT
+*****************************************************************************/
+/******************
+**  ACL Constants
+*******************/
+
+/* ACL modes */
+#define BTM_ACL_MODE_NORMAL     HCI_MODE_ACTIVE
+#define BTM_ACL_MODE_HOLD       HCI_MODE_HOLD
+#define BTM_ACL_MODE_SNIFF      HCI_MODE_SNIFF
+#define BTM_ACL_MODE_PARK       HCI_MODE_PARK
+
+/* Returned with structure in role switch callback (tBTM_ROLE_SWITCH_CMPL) */
+#define BTM_ROLE_MASTER         HCI_ROLE_MASTER
+#define BTM_ROLE_SLAVE          HCI_ROLE_SLAVE
+#define BTM_ROLE_UNDEFINED      0xff     /* undefined value (error status) */
+
+/* ACL Packet Types */
+#define BTM_ACL_PKT_TYPES_MASK_DM1      HCI_PKT_TYPES_MASK_DM1
+#define BTM_ACL_PKT_TYPES_MASK_DH1      HCI_PKT_TYPES_MASK_DH1
+#define BTM_ACL_PKT_TYPES_MASK_DM3      HCI_PKT_TYPES_MASK_DM3
+#define BTM_ACL_PKT_TYPES_MASK_DH3      HCI_PKT_TYPES_MASK_DH3
+#define BTM_ACL_PKT_TYPES_MASK_DM5      HCI_PKT_TYPES_MASK_DM5
+#define BTM_ACL_PKT_TYPES_MASK_DH5      HCI_PKT_TYPES_MASK_DH5
+#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH1 HCI_PKT_TYPES_MASK_NO_2_DH1
+#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH1 HCI_PKT_TYPES_MASK_NO_3_DH1
+#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH3 HCI_PKT_TYPES_MASK_NO_2_DH3
+#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH3 HCI_PKT_TYPES_MASK_NO_3_DH3
+#define BTM_ACL_PKT_TYPES_MASK_NO_2_DH5 HCI_PKT_TYPES_MASK_NO_2_DH5
+#define BTM_ACL_PKT_TYPES_MASK_NO_3_DH5 HCI_PKT_TYPES_MASK_NO_3_DH5
+
+/***************
+**  ACL Types
+****************/
+
+/* Structure returned with link policy information (in tBTM_CMPL_CB callback function)
+** in response to BTM_ReadLinkPolicy call.
+*/
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       hci_status;
+    BD_ADDR     rem_bda;
+    UINT16      settings;
+} tBTM_LNK_POLICY_RESULTS;
+
+/* Structure returned with Role Switch information (in tBTM_CMPL_CB callback function)
+** in response to BTM_SwitchRole call.
+*/
+typedef struct
+{
+    UINT8   hci_status;     /* HCI status returned with the event */
+    UINT8   role;           /* BTM_ROLE_MASTER or BTM_ROLE_SLAVE */
+    BD_ADDR remote_bd_addr; /* Remote BD addr involved with the switch */
+} tBTM_ROLE_SWITCH_CMPL;
+
+
+/* Structure returned with Change Link Key information (in tBTM_CMPL_CB callback function)
+** in response to BTM_ChangeLinkKey call.
+*/
+typedef struct
+{
+    UINT8   hci_status;     /* HCI status returned with the event */
+    BD_ADDR remote_bd_addr; /* Remote BD addr involved with the change link key */
+} tBTM_CHANGE_KEY_CMPL;
+
+
+/* Structure returned with QoS information (in tBTM_CMPL_CB callback function)
+** in response to BTM_SetQoS call.
+*/
+typedef struct
+{
+    FLOW_SPEC flow;
+    UINT16 handle;
+    UINT8 status;
+} tBTM_QOS_SETUP_CMPL;
+
+
+/* Structure returned with read RSSI event (in tBTM_CMPL_CB callback function)
+** in response to BTM_ReadRSSI call.
+*/
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       hci_status;
+    INT8        rssi;
+    BD_ADDR     rem_bda;
+} tBTM_RSSI_RESULTS;
+
+/* Structure returned with read current TX power event (in tBTM_CMPL_CB callback function)
+** in response to BTM_ReadTxPower call.
+*/
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       hci_status;
+    INT8        tx_power;
+    BD_ADDR     rem_bda;
+} tBTM_TX_POWER_RESULTS;
+
+/* Structure returned with read link quality event (in tBTM_CMPL_CB callback function)
+** in response to BTM_ReadLinkQuality call.
+*/
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       hci_status;
+    UINT8       link_quality;
+    BD_ADDR     rem_bda;
+} tBTM_LINK_QUALITY_RESULTS;
+
+/* Structure returned with read inq tx power quality event (in tBTM_CMPL_CB callback function)
+** in response to BTM_ReadInquiryRspTxPower call.
+*/
+typedef struct
+{
+    tBTM_STATUS status;
+    UINT8       hci_status;
+    INT8        tx_power;
+} tBTM_INQ_TXPWR_RESULTS;
+
+enum
+{
+    BTM_BL_CONN_EVT,
+    BTM_BL_DISCN_EVT,
+    BTM_BL_UPDATE_EVT,
+    BTM_BL_ROLE_CHG_EVT,
+    BTM_BL_COLLISION_EVT
+};
+typedef UINT8 tBTM_BL_EVENT;
+typedef UINT16 tBTM_BL_EVENT_MASK;
+
+#define BTM_BL_CONN_MASK        0x0001
+#define BTM_BL_DISCN_MASK       0x0002
+#define BTM_BL_UPDATE_MASK      0x0004
+#define BTM_BL_ROLE_CHG_MASK    0x0008
+
+/* the data type associated with BTM_BL_CONN_EVT */
+typedef struct
+{
+    tBTM_BL_EVENT   event;      /* The event reported. */
+    BD_ADDR_PTR     p_bda;      /* The address of the newly connected device */
+    DEV_CLASS_PTR   p_dc;       /* The device class */
+    BD_NAME_PTR     p_bdn;      /* The device name */
+    UINT8          *p_features; /* The remote device's supported features */
+} tBTM_BL_CONN_DATA;
+
+/* the data type associated with BTM_BL_DISCN_EVT */
+typedef struct
+{
+    tBTM_BL_EVENT   event;  /* The event reported. */
+    BD_ADDR_PTR     p_bda;  /* The address of the disconnected device */
+} tBTM_BL_DISCN_DATA;
+
+/* Busy-Level shall have the inquiry_paging mask set when
+ * inquiry/paging is in progress, Else the number of ACL links */
+#define BTM_BL_INQUIRY_PAGING_MASK 0x10
+#define BTM_BL_INQUIRY_STARTED   (BTM_BL_INQUIRY_PAGING_MASK | 0x1)
+#define BTM_BL_INQUIRY_CANCELLED (BTM_BL_INQUIRY_PAGING_MASK | 0x2)
+#define BTM_BL_INQUIRY_COMPLETE  (BTM_BL_INQUIRY_PAGING_MASK | 0x3)
+#define BTM_BL_PAGING_STARTED    (BTM_BL_INQUIRY_PAGING_MASK | 0x4)
+#define BTM_BL_PAGING_COMPLETE   (BTM_BL_INQUIRY_PAGING_MASK | 0x5)
+/* the data type associated with BTM_BL_UPDATE_EVT */
+typedef struct
+{
+    tBTM_BL_EVENT   event;  /* The event reported. */
+    UINT8           busy_level;/* when paging or inquiring, level is as above.
+                                * Otherwise, the number of ACL links. */
+} tBTM_BL_UPDATE_DATA;
+
+/* the data type associated with BTM_BL_ROLE_CHG_EVT */
+typedef struct
+{
+    tBTM_BL_EVENT   event;      /* The event reported. */
+    BD_ADDR_PTR     p_bda;      /* The address of the peer connected device */
+    UINT8           new_role;
+    UINT8           hci_status; /* HCI status returned with the event */
+} tBTM_BL_ROLE_CHG_DATA;
+
+typedef union
+{
+    tBTM_BL_EVENT           event;  /* The event reported. */
+    tBTM_BL_CONN_DATA       conn;   /* The data associated with BTM_BL_CONN_EVT */
+    tBTM_BL_DISCN_DATA      discn;  /* The data associated with BTM_BL_DISCN_EVT */
+    tBTM_BL_UPDATE_DATA     update; /* The data associated with BTM_BL_UPDATE_EVT */
+    tBTM_BL_ROLE_CHG_DATA   role_chg;/*The data associated with BTM_BL_ROLE_CHG_EVT */
+} tBTM_BL_EVENT_DATA;
+
+/* Callback function for notifications when the BTM busy level
+** changes.
+*/
+typedef void (tBTM_BL_CHANGE_CB) (tBTM_BL_EVENT_DATA *p_data);
+
+/***************************
+**  ACL Callback Functions
+****************************/
+/* Callback function for notifications when the BTM ACL connection DB
+** changes. First param is BD address, second is if added or removed.
+** Registered through BTM_AclRegisterForChanges call.
+*/
+typedef void (tBTM_ACL_DB_CHANGE_CB) (BD_ADDR p_bda, DEV_CLASS p_dc,
+                                      BD_NAME p_bdn, BD_FEATURES features,
+                                      BOOLEAN is_new);
+
+/*****************************************************************************
+**  SCO CHANNEL MANAGEMENT
+*****************************************************************************/
+/******************
+**  SCO Constants
+*******************/
+
+/* Define an invalid SCO index and an invalid HCI handle */
+#define BTM_INVALID_SCO_INDEX       0xFFFF
+#define BTM_INVALID_HCI_HANDLE      0xFFFF
+
+/* Define an invalid SCO disconnect reason */
+#define BTM_INVALID_SCO_DISC_REASON 0xFFFF
+
+/* Define SCO packet types used in APIs */
+#define BTM_SCO_PKT_TYPES_MASK_HV1  HCI_ESCO_PKT_TYPES_MASK_HV1
+#define BTM_SCO_PKT_TYPES_MASK_HV2  HCI_ESCO_PKT_TYPES_MASK_HV2
+#define BTM_SCO_PKT_TYPES_MASK_HV3  HCI_ESCO_PKT_TYPES_MASK_HV3
+#define BTM_SCO_PKT_TYPES_MASK_EV3  HCI_ESCO_PKT_TYPES_MASK_EV3
+#define BTM_SCO_PKT_TYPES_MASK_EV4  HCI_ESCO_PKT_TYPES_MASK_EV4
+#define BTM_SCO_PKT_TYPES_MASK_EV5  HCI_ESCO_PKT_TYPES_MASK_EV5
+#define BTM_SCO_PKT_TYPES_MASK_NO_2_EV3  HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3
+#define BTM_SCO_PKT_TYPES_MASK_NO_3_EV3  HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3
+#define BTM_SCO_PKT_TYPES_MASK_NO_2_EV5  HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5
+#define BTM_SCO_PKT_TYPES_MASK_NO_3_EV5  HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5
+
+#define BTM_SCO_LINK_ONLY_MASK  (BTM_SCO_PKT_TYPES_MASK_HV1 | \
+                                 BTM_SCO_PKT_TYPES_MASK_HV2 | \
+                                 BTM_SCO_PKT_TYPES_MASK_HV3)
+
+#define BTM_ESCO_LINK_ONLY_MASK (BTM_SCO_PKT_TYPES_MASK_EV3 | \
+                                 BTM_SCO_PKT_TYPES_MASK_EV4 | \
+                                 BTM_SCO_PKT_TYPES_MASK_EV5)
+
+#define BTM_SCO_LINK_ALL_PKT_MASK   (BTM_SCO_LINK_ONLY_MASK     | \
+                                     BTM_ESCO_LINK_ONLY_MASK)
+
+#define BTM_VALID_SCO_ALL_PKT_TYPE HCI_VALID_SCO_ALL_PKT_TYPE
+
+/* Passed in BTM_CreateSco if the packet type parameter should be ignored */
+#define BTM_IGNORE_SCO_PKT_TYPE     0
+
+/***************
+**  SCO Types
+****************/
+#define BTM_LINK_TYPE_SCO           HCI_LINK_TYPE_SCO
+#define BTM_LINK_TYPE_ESCO          HCI_LINK_TYPE_ESCO
+typedef UINT8 tBTM_SCO_TYPE;
+
+
+/*******************
+** SCO Routing Path
+********************/
+#define BTM_SCO_ROUTE_PCM           HCI_BRCM_SCO_ROUTE_PCM
+#define BTM_SCO_ROUTE_HCI           HCI_BRCM_SCO_ROUTE_HCI
+typedef UINT8 tBTM_SCO_ROUTE_TYPE;
+
+
+/*******************
+** SCO Codec Types
+********************/
+#define BTM_SCO_CODEC_NONE          0x0000
+#define BTM_SCO_CODEC_CVSD          0x0001
+#define BTM_SCO_CODEC_MSBC          0x0002
+typedef UINT16 tBTM_SCO_CODEC_TYPE;
+
+/*******************
+** SCO Voice Settings
+********************/
+#define BTM_VOICE_SETTING_CVSD  ((UINT16)  (HCI_INP_CODING_LINEAR          |   \
+                                            HCI_INP_DATA_FMT_2S_COMPLEMENT |   \
+                                            HCI_INP_SAMPLE_SIZE_16BIT      |   \
+                                            HCI_AIR_CODING_FORMAT_CVSD))
+
+#define BTM_VOICE_SETTING_TRANS ((UINT16)  (HCI_INP_CODING_LINEAR          |   \
+                                            HCI_INP_DATA_FMT_2S_COMPLEMENT |   \
+                                            HCI_INP_SAMPLE_SIZE_16BIT      |   \
+                                            HCI_AIR_CODING_FORMAT_TRANSPNT))
+
+/*******************
+** SCO Data Status
+********************/
+enum
+{
+    BTM_SCO_DATA_CORRECT,
+    BTM_SCO_DATA_PAR_ERR,
+    BTM_SCO_DATA_NONE,
+    BTM_SCO_DATA_PAR_LOST
+};
+typedef UINT8 tBTM_SCO_DATA_FLAG;
+
+/***************************
+**  SCO Callback Functions
+****************************/
+typedef void (tBTM_SCO_CB) (UINT16 sco_inx);
+typedef void (tBTM_SCO_DATA_CB) (UINT16 sco_inx, BT_HDR *p_data, tBTM_SCO_DATA_FLAG status);
+
+/******************
+**  eSCO Constants
+*******************/
+#define BTM_64KBITS_RATE            0x00001f40  /* 64 kbits/sec data rate */
+
+/* Retransmission effort */
+#define BTM_ESCO_RETRANS_OFF        0
+#define BTM_ESCO_RETRANS_POWER      1
+#define BTM_ESCO_RETRANS_QUALITY    2
+#define BTM_ESCO_RETRANS_DONTCARE   0xff
+
+/* Max Latency Don't Care */
+#define BTM_ESCO_MAX_LAT_DONTCARE   0xffff
+
+/***************
+**  eSCO Types
+****************/
+/* tBTM_ESCO_CBACK event types */
+#define BTM_ESCO_CHG_EVT        1
+#define BTM_ESCO_CONN_REQ_EVT   2
+typedef UINT8 tBTM_ESCO_EVT;
+
+/* Passed into BTM_SetEScoMode() */
+typedef struct
+{
+    UINT32 tx_bw;
+    UINT32 rx_bw;
+    UINT16 max_latency;
+    UINT16 voice_contfmt;  /* Voice Settings or Content Format */
+    UINT16 packet_types;
+    UINT8  retrans_effort;
+} tBTM_ESCO_PARAMS;
+
+typedef struct
+{
+    UINT16 max_latency;
+    UINT16 packet_types;
+    UINT8  retrans_effort;
+} tBTM_CHG_ESCO_PARAMS;
+
+/* Returned by BTM_ReadEScoLinkParms() */
+typedef struct
+{
+    UINT16  rx_pkt_len;
+    UINT16  tx_pkt_len;
+    BD_ADDR bd_addr;
+    UINT8   link_type;  /* BTM_LINK_TYPE_SCO or BTM_LINK_TYPE_ESCO */
+    UINT8   tx_interval;
+    UINT8   retrans_window;
+    UINT8   air_mode;
+} tBTM_ESCO_DATA;
+
+typedef struct
+{
+    UINT16  sco_inx;
+    UINT16  rx_pkt_len;
+    UINT16  tx_pkt_len;
+    BD_ADDR bd_addr;
+    UINT8   hci_status;
+    UINT8   tx_interval;
+    UINT8   retrans_window;
+} tBTM_CHG_ESCO_EVT_DATA;
+
+typedef struct
+{
+    UINT16        sco_inx;
+    BD_ADDR       bd_addr;
+    DEV_CLASS     dev_class;
+    tBTM_SCO_TYPE link_type;
+} tBTM_ESCO_CONN_REQ_EVT_DATA;
+
+typedef union
+{
+    tBTM_CHG_ESCO_EVT_DATA      chg_evt;
+    tBTM_ESCO_CONN_REQ_EVT_DATA conn_evt;
+} tBTM_ESCO_EVT_DATA;
+
+/***************************
+**  eSCO Callback Functions
+****************************/
+typedef void (tBTM_ESCO_CBACK) (tBTM_ESCO_EVT event, tBTM_ESCO_EVT_DATA *p_data);
+
+
+/*****************************************************************************
+**  SECURITY MANAGEMENT
+*****************************************************************************/
+/*******************************
+**  Security Manager Constants
+********************************/
+
+/* Security Mode (BTM_SetSecurityMode) */
+#define BTM_SEC_MODE_UNDEFINED      0
+#define BTM_SEC_MODE_NONE           1
+#define BTM_SEC_MODE_SERVICE        2
+#define BTM_SEC_MODE_LINK           3
+#define BTM_SEC_MODE_SP             4
+#define BTM_SEC_MODE_SP_DEBUG       5
+
+/* Security Service Levels [bit mask] (BTM_SetSecurityLevel)
+** Encryption should not be used without authentication
+*/
+#define BTM_SEC_NONE               0x0000 /* Nothing required */
+#define BTM_SEC_IN_AUTHORIZE       0x0001 /* Inbound call requires authorization */
+#define BTM_SEC_IN_AUTHENTICATE    0x0002 /* Inbound call requires authentication */
+#define BTM_SEC_IN_ENCRYPT         0x0004 /* Inbound call requires encryption */
+#define BTM_SEC_OUT_AUTHORIZE      0x0008 /* Outbound call requires authorization */
+#define BTM_SEC_OUT_AUTHENTICATE   0x0010 /* Outbound call requires authentication */
+#define BTM_SEC_OUT_ENCRYPT        0x0020 /* Outbound call requires encryption */
+#define BTM_SEC_BOND               0x0040 /* Bonding */
+#define BTM_SEC_BOND_CONN          0x0080 /* bond_created_connection */
+#define BTM_SEC_FORCE_MASTER       0x0100 /* Need to switch connection to be master */
+#define BTM_SEC_ATTEMPT_MASTER     0x0200 /* Try to switch connection to be master */
+#define BTM_SEC_FORCE_SLAVE        0x0400 /* Need to switch connection to be master */
+#define BTM_SEC_ATTEMPT_SLAVE      0x0800 /* Try to switch connection to be slave */
+#define BTM_SEC_IN_MITM            0x1000 /* inbound Do man in the middle protection */
+#define BTM_SEC_OUT_MITM           0x2000 /* outbound Do man in the middle protection */
+
+/* Security Flags [bit mask] (BTM_GetSecurityFlags)
+*/
+#define BTM_SEC_FLAG_AUTHORIZED     0x01
+#define BTM_SEC_FLAG_AUTHENTICATED  0x02
+#define BTM_SEC_FLAG_ENCRYPTED      0x04
+#define BTM_SEC_FLAG_LKEY_KNOWN     0x10
+#define BTM_SEC_FLAG_LKEY_AUTHED    0x20
+
+/* PIN types */
+#define BTM_PIN_TYPE_VARIABLE       HCI_PIN_TYPE_VARIABLE
+#define BTM_PIN_TYPE_FIXED          HCI_PIN_TYPE_FIXED
+
+/* Link Key types used to generate the new link key.
+** returned in link key notification callback function
+*/
+#define BTM_LKEY_TYPE_COMBINATION   HCI_LKEY_TYPE_COMBINATION
+#define BTM_LKEY_TYPE_LOCAL_UNIT    HCI_LKEY_TYPE_LOCAL_UNIT
+#define BTM_LKEY_TYPE_REMOTE_UNIT   HCI_LKEY_TYPE_REMOTE_UNIT
+#define BTM_LKEY_TYPE_DEBUG_COMB    HCI_LKEY_TYPE_DEBUG_COMB
+#define BTM_LKEY_TYPE_UNAUTH_COMB   HCI_LKEY_TYPE_UNAUTH_COMB
+#define BTM_LKEY_TYPE_AUTH_COMB     HCI_LKEY_TYPE_AUTH_COMB
+#define BTM_LKEY_TYPE_CHANGED_COMB  HCI_LKEY_TYPE_CHANGED_COMB
+#define BTM_LKEY_TYPE_IGNORE        0xff    /* used when event is response from
+                                               hci return link keys request */
+
+/* Protocol level security (BTM_SetSecurityLevel) */
+#define BTM_SEC_PROTO_L2CAP         0
+#define BTM_SEC_PROTO_SDP           1
+#define BTM_SEC_PROTO_TCS           2
+#define BTM_SEC_PROTO_RFCOMM        3
+#define BTM_SEC_PROTO_OBEX          4
+#define BTM_SEC_PROTO_BNEP          5
+#define BTM_SEC_PROTO_HID           6   /* HID      */
+#define BTM_SEC_PROTO_AVDT          7
+#define BTM_SEC_PROTO_MCA           8
+
+/* Determine the number of UINT32's necessary for security services */
+#define BTM_SEC_ARRAY_BITS          32          /* Number of bits in each array element */
+#define BTM_SEC_SERVICE_ARRAY_SIZE  (((UINT32)BTM_SEC_MAX_SERVICES / BTM_SEC_ARRAY_BITS) + \
+                                    (((UINT32)BTM_SEC_MAX_SERVICES % BTM_SEC_ARRAY_BITS) ? 1 : 0))
+
+/* Security service definitions (BTM_SetSecurityLevel)
+** Used for Authorization APIs
+*/
+#define BTM_SEC_SERVICE_SDP_SERVER      0
+#define BTM_SEC_SERVICE_SERIAL_PORT     1
+#define BTM_SEC_SERVICE_LAN_ACCESS      2
+#define BTM_SEC_SERVICE_DUN             3
+#define BTM_SEC_SERVICE_IRMC_SYNC       4
+#define BTM_SEC_SERVICE_IRMC_SYNC_CMD   5
+#define BTM_SEC_SERVICE_OBEX            6
+#define BTM_SEC_SERVICE_OBEX_FTP        7
+#define BTM_SEC_SERVICE_HEADSET         8
+#define BTM_SEC_SERVICE_CORDLESS        9
+#define BTM_SEC_SERVICE_INTERCOM        10
+#define BTM_SEC_SERVICE_FAX             11
+#define BTM_SEC_SERVICE_HEADSET_AG      12
+#define BTM_SEC_SERVICE_PNP_INFO        13
+#define BTM_SEC_SERVICE_GEN_NET         14
+#define BTM_SEC_SERVICE_GEN_FILE        15
+#define BTM_SEC_SERVICE_GEN_AUDIO       16
+#define BTM_SEC_SERVICE_GEN_TEL         17
+#define BTM_SEC_SERVICE_CTP_DATA        18
+#define BTM_SEC_SERVICE_HCRP_CTRL       19
+#define BTM_SEC_SERVICE_HCRP_DATA       20
+#define BTM_SEC_SERVICE_HCRP_NOTIF      21
+#define BTM_SEC_SERVICE_BPP_JOB         22
+#define BTM_SEC_SERVICE_BPP_STATUS      23
+#define BTM_SEC_SERVICE_BPP_REF         24
+#define BTM_SEC_SERVICE_BNEP_PANU       25
+#define BTM_SEC_SERVICE_BNEP_GN         26
+#define BTM_SEC_SERVICE_BNEP_NAP        27
+#define BTM_SEC_SERVICE_HF_HANDSFREE    28
+#define BTM_SEC_SERVICE_AG_HANDSFREE    29
+#define BTM_SEC_SERVICE_TE_PHONE_ACCESS 30
+#define BTM_SEC_SERVICE_ME_PHONE_ACCESS 31
+
+#define BTM_SEC_SERVICE_HID_SEC_CTRL    32
+#define BTM_SEC_SERVICE_HID_NOSEC_CTRL  33
+#define BTM_SEC_SERVICE_HID_INTR        34
+#define BTM_SEC_SERVICE_BIP             35
+#define BTM_SEC_SERVICE_BIP_REF         36
+#define BTM_SEC_SERVICE_AVDTP           37
+#define BTM_SEC_SERVICE_AVDTP_NOSEC     38
+#define BTM_SEC_SERVICE_AVCTP           39
+#define BTM_SEC_SERVICE_SAP             40
+#define BTM_SEC_SERVICE_PBAP            41
+#define BTM_SEC_SERVICE_RFC_MUX         42
+#define BTM_SEC_SERVICE_AVCTP_BROWSE    43
+#define BTM_SEC_SERVICE_MAP             44
+#define BTM_SEC_SERVICE_MAP_NOTIF       45
+#define BTM_SEC_SERVICE_MCAP_CTRL       46
+#define BTM_SEC_SERVICE_MCAP_DATA       47
+#define BTM_SEC_SERVICE_HDP_SNK         48
+#define BTM_SEC_SERVICE_HDP_SRC         49
+#define BTM_SEC_SERVICE_ATT             50
+
+/* Update these as services are added */
+#define BTM_SEC_SERVICE_FIRST_EMPTY     51
+
+#ifndef BTM_SEC_MAX_SERVICES
+#define BTM_SEC_MAX_SERVICES            65
+#endif
+
+/************************************************************************************************
+** Security Services MACROS handle array of UINT32 bits for more than 32 trusted services
+*************************************************************************************************/
+/* MACRO to set the security service bit mask in a bit stream */
+#define BTM_SEC_SET_SERVICE(p, service)  (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] |=  \
+                                    ((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))
+
+
+/* MACRO to clear the security service bit mask in a bit stream */
+#define BTM_SEC_CLR_SERVICE(p, service)  (((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)] &=  \
+                                    ~((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))
+
+/* MACRO to check the security service bit mask in a bit stream (Returns TRUE or FALSE) */
+#define BTM_SEC_IS_SERVICE_TRUSTED(p, service)    (((((UINT32 *)(p))[(((UINT32)(service)) / BTM_SEC_ARRAY_BITS)]) &   \
+                                        (UINT32)(((UINT32)1 << (((UINT32)(service)) % BTM_SEC_ARRAY_BITS)))) ? TRUE : FALSE)
+
+/* MACRO to copy two trusted device bitmask */
+#define BTM_SEC_COPY_TRUSTED_DEVICE(p_src, p_dst)   {int trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \
+                                                        ((UINT32 *)(p_dst))[trst] = ((UINT32 *)(p_src))[trst];}
+
+/* MACRO to clear two trusted device bitmask */
+#define BTM_SEC_CLR_TRUSTED_DEVICE(p_dst)   {int trst; for (trst = 0; trst < BTM_SEC_SERVICE_ARRAY_SIZE; trst++) \
+                                                        ((UINT32 *)(p_dst))[trst] = 0;}
+
+/* Following bits can be provided by host in the trusted_mask array */
+/* 0..31 bits of mask[0] (Least Significant Word) */
+#define BTM_SEC_TRUST_SDP_SERVER        (1 << BTM_SEC_SERVICE_SDP_SERVER)
+#define BTM_SEC_TRUST_SERIAL_PORT       (1 << BTM_SEC_SERVICE_SERIAL_PORT)
+#define BTM_SEC_TRUST_LAN_ACCESS        (1 << BTM_SEC_SERVICE_LAN_ACCESS)
+#define BTM_SEC_TRUST_DUN               (1 << BTM_SEC_SERVICE_DUN)
+#define BTM_SEC_TRUST_IRMC_SYNC         (1 << BTM_SEC_SERVICE_IRMC_SYNC)
+#define BTM_SEC_TRUST_IRMC_SYNC_CMD     (1 << BTM_SEC_SERVICE_IRMC_SYNC_CMD)
+#define BTM_SEC_TRUST_OBEX              (1 << BTM_SEC_SERVICE_OBEX)
+#define BTM_SEC_TRUST_OBEX_FTP          (1 << BTM_SEC_SERVICE_OBEX_FTP)
+#define BTM_SEC_TRUST_HEADSET           (1 << BTM_SEC_SERVICE_HEADSET)
+#define BTM_SEC_TRUST_CORDLESS          (1 << BTM_SEC_SERVICE_CORDLESS)
+#define BTM_SEC_TRUST_INTERCOM          (1 << BTM_SEC_SERVICE_INTERCOM)
+#define BTM_SEC_TRUST_FAX               (1 << BTM_SEC_SERVICE_FAX)
+#define BTM_SEC_TRUST_HEADSET_AG        (1 << BTM_SEC_SERVICE_HEADSET_AG)
+#define BTM_SEC_TRUST_PNP_INFO          (1 << BTM_SEC_SERVICE_PNP_INFO)
+#define BTM_SEC_TRUST_GEN_NET           (1 << BTM_SEC_SERVICE_GEN_NET)
+#define BTM_SEC_TRUST_GEN_FILE          (1 << BTM_SEC_SERVICE_GEN_FILE)
+#define BTM_SEC_TRUST_GEN_AUDIO         (1 << BTM_SEC_SERVICE_GEN_AUDIO)
+#define BTM_SEC_TRUST_GEN_TEL           (1 << BTM_SEC_SERVICE_GEN_TEL)
+#define BTM_SEC_TRUST_CTP_DATA          (1 << BTM_SEC_SERVICE_CTP_DATA)
+#define BTM_SEC_TRUST_HCRP_CTRL         (1 << BTM_SEC_SERVICE_HCRP_CTRL)
+#define BTM_SEC_TRUST_HCRP_DATA         (1 << BTM_SEC_SERVICE_HCRP_DATA)
+#define BTM_SEC_TRUST_HCRP_NOTIF        (1 << BTM_SEC_SERVICE_HCRP_NOTIF)
+#define BTM_SEC_TRUST_BPP_JOB           (1 << BTM_SEC_SERVICE_JOB)
+#define BTM_SEC_TRUST_BPP_STATUS        (1 << BTM_SEC_SERVICE_STATUS)
+#define BTM_SEC_TRUST_BPP_REF           (1 << BTM_SEC_SERVICE_REF)
+#define BTM_SEC_TRUST_BNEP_PANU         (1 << BTM_SEC_SERVICE_BNEP_PANU)
+#define BTM_SEC_TRUST_BNEP_GN           (1 << BTM_SEC_SERVICE_BNEP_GN)
+#define BTM_SEC_TRUST_BNEP_NAP          (1 << BTM_SEC_SERVICE_BNEP_NAP)
+#define BTM_SEC_TRUST_HFP_HF            (1 << BTM_SEC_SERVICE_HF_HANDSFREE)
+#define BTM_SEC_TRUST_HFP_AG            (1 << BTM_SEC_SERVICE_AG_HANDSFREE)
+#define BTM_SEC_TRUST_TE_PHONE_ACCESS   (1 << BTM_SEC_SERVICE_TE_PHONE_ACCESS)
+#define BTM_SEC_TRUST_ME_PHONE_ACCESS   (1 << BTM_SEC_SERVICE_ME_PHONE_ACCESS)
+
+/* 0..31 bits of mask[1] (Most Significant Word) */
+#define BTM_SEC_TRUST_HID_CTRL          (1 << (BTM_SEC_SERVICE_HID_SEC_CTRL - 32))
+#define BTM_SEC_TRUST_HID_NOSEC_CTRL    (1 << (BTM_SEC_SERVICE_HID_NOSEC_CTRL - 32))
+#define BTM_SEC_TRUST_HID_INTR          (1 << (BTM_SEC_SERVICE_HID_INTR - 32))
+#define BTM_SEC_TRUST_BIP               (1 << (BTM_SEC_SERVICE_BIP - 32))
+#define BTM_SEC_TRUST_BIP_REF           (1 << (BTM_SEC_SERVICE_BIP_REF - 32))
+#define BTM_SEC_TRUST_AVDTP             (1 << (BTM_SEC_SERVICE_AVDTP - 32))
+#define BTM_SEC_TRUST_AVDTP_NOSEC       (1 << (BTM_SEC_SERVICE_AVDTP_NOSEC - 32))
+#define BTM_SEC_TRUST_AVCTP             (1 << (BTM_SEC_SERVICE_AVCTP - 32))
+#define BTM_SEC_TRUST_SAP               (1 << (BTM_SEC_SERVICE_SAP - 32))
+#define BTM_SEC_TRUST_PBAP              (1 << (BTM_SEC_SERVICE_PBAP - 32))
+#define BTM_SEC_TRUST_RFC_MUX           (1 << (BTM_SEC_SERVICE_RFC_MUX - 32))
+#define BTM_SEC_TRUST_AVCTP_BROWSE      (1 << (BTM_SEC_SERVICE_AVCTP_BROWSE - 32))
+#define BTM_SEC_TRUST_MAP               (1 << (BTM_SEC_SERVICE_MAP - 32))
+#define BTM_SEC_TRUST_MAP_NOTIF         (1 << (BTM_SEC_SERVICE_MAP_NOTIF - 32))
+#define BTM_SEC_TRUST_MCAP_CTRL         (1 << (BTM_SEC_SERVICE_MCAP_CTRL - 32))
+#define BTM_SEC_TRUST_MCAP_DATA         (1 << (BTM_SEC_SERVICE_MCAP_DATA - 32))
+#define BTM_SEC_TRUST_HDP_SNK           (1 << (BTM_SEC_SERVICE_HDP_SNK - 32))
+#define BTM_SEC_TRUST_HDP_SRC           (1 << (BTM_SEC_SERVICE_HDP_SRC - 32))
+
+#define BTM_SEC_TRUST_ALL               0xFFFFFFFF  /* for each array element */
+
+/****************************************
+**  Security Manager Callback Functions
+*****************************************/
+/* Authorize device for service.  Parameters are
+**              BD Address of remote
+**              Device Class of remote
+**              BD Name of remote
+**              Service name
+**              Service Id (NULL - unknown service or unused
+**                                 [BTM_SEC_SERVICE_NAME_LEN set to 0])
+**              Is originator of the connection
+**              Result of the operation
+*/
+typedef UINT8 (tBTM_AUTHORIZE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                         tBTM_BD_NAME bd_name, UINT8 *service_name,
+                                         UINT8 service_id, BOOLEAN is_originator);
+
+/* Get PIN for the connection.  Parameters are
+**              BD Address of remote
+**              Device Class of remote
+**              BD Name of remote
+*/
+typedef UINT8 (tBTM_PIN_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                   tBTM_BD_NAME bd_name);
+
+
+/* Get Link Key for the connection.  Parameters are
+**              BD Address of remote
+**              Link Key
+*/
+typedef UINT8 (tBTM_LINK_KEY_REQ_CALLBACK) (BD_ADDR bd_addr, LINK_KEY key);
+
+/* New Link Key for the connection.  Parameters are
+**              BD Address of remote
+**              Link Key
+**              Key Type: Combination, Local Unit, or Remote Unit
+*/
+typedef UINT8 (tBTM_LINK_KEY_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                        tBTM_BD_NAME bd_name, UINT8 *key,
+                                        UINT8 key_type);
+
+
+/* Remote Name Resolved.  Parameters are
+**              BD Address of remote
+**              BD Name of remote
+*/
+typedef void (tBTM_RMT_NAME_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dc,
+                                       tBTM_BD_NAME bd_name);
+
+
+/* Authentication complete for the connection.  Parameters are
+**              BD Address of remote
+**              Device Class of remote
+**              BD Name of remote
+**
+*/
+typedef UINT8 (tBTM_AUTH_COMPLETE_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                             tBTM_BD_NAME bd_name, int result);
+
+/* Operation abort.  Called by the stack when link goes down during.  Pin code
+** request or authorization.  Parameters are
+**              BD Address of remote
+**
+*/
+typedef UINT8 (tBTM_ABORT_CALLBACK) (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                     tBTM_BD_NAME bd_name);
+
+enum
+{
+    BTM_SP_IO_REQ_EVT,      /* received IO_CAPABILITY_REQUEST event */
+    BTM_SP_IO_RSP_EVT,      /* received IO_CAPABILITY_RESPONSE event */
+    BTM_SP_CFM_REQ_EVT,     /* received USER_CONFIRMATION_REQUEST event */
+    BTM_SP_KEY_NOTIF_EVT,   /* received USER_PASSKEY_NOTIFY event */
+    BTM_SP_KEY_REQ_EVT,     /* received USER_PASSKEY_REQUEST event */
+    BTM_SP_KEYPRESS_EVT,    /* received KEYPRESS_NOTIFY event */
+    BTM_SP_LOC_OOB_EVT,     /* received result for READ_LOCAL_OOB_DATA command */
+    BTM_SP_RMT_OOB_EVT,     /* received REMOTE_OOB_DATA_REQUEST event */
+    BTM_SP_COMPLT_EVT,      /* received SIMPLE_PAIRING_COMPLETE event */
+    BTM_SP_UPGRADE_EVT      /* check if the application wants to upgrade the link key */
+};
+typedef UINT8 tBTM_SP_EVT;
+
+#define BTM_IO_CAP_OUT      0   /* DisplayOnly */
+#define BTM_IO_CAP_IO       1   /* DisplayYesNo */
+#define BTM_IO_CAP_IN       2   /* KeyboardOnly */
+#define BTM_IO_CAP_NONE     3   /* NoInputNoOutput */
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+#define BTM_IO_CAP_KBDISP   4   /* Keyboard display */
+#define BTM_IO_CAP_MAX      5
+#else
+#define BTM_IO_CAP_MAX      4
+#endif
+
+typedef UINT8 tBTM_IO_CAP;
+
+#define BTM_MAX_PASSKEY_VAL (999999)
+#define BTM_MIN_PASSKEY_VAL (0)
+
+#define BTM_AUTH_SP_NO      0   /* MITM Protection Not Required - Single Profile/non-bonding
+                                Numeric comparison with automatic accept allowed */
+#define BTM_AUTH_SP_YES     1   /* MITM Protection Required - Single Profile/non-bonding
+                                Use IO Capabilities to determine authentication procedure */
+#define BTM_AUTH_AP_NO      2   /* MITM Protection Not Required - All Profiles/dedicated bonding
+                                Numeric comparison with automatic accept allowed */
+#define BTM_AUTH_AP_YES     3   /* MITM Protection Required - All Profiles/dedicated bonding
+                                Use IO Capabilities to determine authentication procedure */
+#define BTM_AUTH_SPGB_NO    4   /* MITM Protection Not Required - Single Profiles/general bonding
+                                Numeric comparison with automatic accept allowed */
+#define BTM_AUTH_SPGB_YES   5   /* MITM Protection Required - Single Profiles/general bonding
+                                Use IO Capabilities to determine authentication procedure */
+#define BTM_AUTH_DD_BOND    2   /* this bit is ORed to the BTM_AUTH_SP_* when IO exchange for dedicated bonding */
+#define BTM_AUTH_GB_BIT     4   /* the genernal bonding bit */
+#define BTM_AUTH_BONDS      6   /* the general/dedicated bonding bits  */
+#define BTM_AUTH_YN_BIT     1   /* this is the Yes or No bit  */
+
+typedef UINT8 tBTM_AUTH_REQ;
+
+enum
+{
+    BTM_OOB_NONE,
+    BTM_OOB_PRESENT
+#if BTM_OOB_INCLUDED == TRUE
+    ,BTM_OOB_UNKNOWN
+#endif
+};
+typedef UINT8 tBTM_OOB_DATA;
+
+/* data type for BTM_SP_IO_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    tBTM_IO_CAP     io_cap;         /* local IO capabilities */
+    tBTM_OOB_DATA   oob_data;       /* OOB data present (locally) for the peer device */
+    tBTM_AUTH_REQ   auth_req;       /* Authentication required (for local device) */
+    BOOLEAN         is_orig;        /* TRUE, if local device initiated the SP process */
+} tBTM_SP_IO_REQ;
+
+/* data type for BTM_SP_IO_RSP_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    tBTM_IO_CAP     io_cap;         /* peer IO capabilities */
+    tBTM_OOB_DATA   oob_data;       /* OOB data present at peer device for the local device */
+    tBTM_AUTH_REQ   auth_req;       /* Authentication required for peer device */
+} tBTM_SP_IO_RSP;
+
+/* data type for BTM_SP_CFM_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    tBTM_BD_NAME    bd_name;        /* peer device name */
+    UINT32          num_val;        /* the numeric value for comparison. If just_works, do not show this number to UI */
+    BOOLEAN         just_works;     /* TRUE, if "Just Works" association model */
+    tBTM_AUTH_REQ   loc_auth_req;   /* Authentication required for local device */
+    tBTM_AUTH_REQ   rmt_auth_req;   /* Authentication required for peer device */
+    tBTM_IO_CAP     loc_io_caps;    /* IO Capabilities of the local device */
+    tBTM_IO_CAP     rmt_io_caps;    /* IO Capabilities of the remot device */
+} tBTM_SP_CFM_REQ;
+
+/* data type for BTM_SP_KEY_REQ_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    tBTM_BD_NAME    bd_name;        /* peer device name */
+} tBTM_SP_KEY_REQ;
+
+/* data type for BTM_SP_KEY_NOTIF_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    tBTM_BD_NAME    bd_name;        /* peer device name */
+    UINT32          passkey;        /* passkey */
+} tBTM_SP_KEY_NOTIF;
+
+enum
+{
+    BTM_SP_KEY_STARTED,         /* passkey entry started */
+    BTM_SP_KEY_ENTERED,         /* passkey digit entered */
+    BTM_SP_KEY_ERASED,          /* passkey digit erased */
+    BTM_SP_KEY_CLEARED,         /* passkey cleared */
+    BTM_SP_KEY_COMPLT           /* passkey entry completed */
+};
+typedef UINT8   tBTM_SP_KEY_TYPE;
+
+/* data type for BTM_SP_KEYPRESS_EVT */
+typedef struct
+{
+    BD_ADDR             bd_addr;        /* peer address */
+    tBTM_SP_KEY_TYPE   notif_type;
+} tBTM_SP_KEYPRESS;
+
+/* data type for BTM_SP_LOC_OOB_EVT */
+typedef struct
+{
+    tBTM_STATUS     status;         /* */
+    BT_OCTET16      c;              /* Simple Pairing Hash C */
+    BT_OCTET16      r;              /* Simple Pairing Randomnizer R */
+} tBTM_SP_LOC_OOB;
+
+/* data type for BTM_SP_RMT_OOB_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    tBTM_BD_NAME    bd_name;        /* peer device name */
+} tBTM_SP_RMT_OOB;
+
+
+/* data type for BTM_SP_COMPLT_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    DEV_CLASS       dev_class;      /* peer CoD */
+    tBTM_BD_NAME    bd_name;        /* peer device name */
+    tBTM_STATUS     status;         /* status of the simple pairing process */
+} tBTM_SP_COMPLT;
+
+/* data type for BTM_SP_UPGRADE_EVT */
+typedef struct
+{
+    BD_ADDR         bd_addr;        /* peer address */
+    BOOLEAN         upgrade;        /* TRUE, to upgrade the link key */
+} tBTM_SP_UPGRADE;
+
+typedef union
+{
+    tBTM_SP_IO_REQ      io_req;     /* BTM_SP_IO_REQ_EVT      */
+    tBTM_SP_IO_RSP      io_rsp;     /* BTM_SP_IO_RSP_EVT      */
+    tBTM_SP_CFM_REQ     cfm_req;    /* BTM_SP_CFM_REQ_EVT     */
+    tBTM_SP_KEY_NOTIF   key_notif;  /* BTM_SP_KEY_NOTIF_EVT   */
+    tBTM_SP_KEY_REQ     key_req;    /* BTM_SP_KEY_REQ_EVT     */
+    tBTM_SP_KEYPRESS    key_press;  /* BTM_SP_KEYPRESS_EVT    */
+    tBTM_SP_LOC_OOB     loc_oob;    /* BTM_SP_LOC_OOB_EVT     */
+    tBTM_SP_RMT_OOB     rmt_oob;    /* BTM_SP_RMT_OOB_EVT     */
+    tBTM_SP_COMPLT      complt;     /* BTM_SP_COMPLT_EVT      */
+    tBTM_SP_UPGRADE     upgrade;    /* BTM_SP_UPGRADE_EVT      */
+} tBTM_SP_EVT_DATA;
+
+/* Simple Pairing Events.  Called by the stack when Simple Pairing related
+** events occur.
+*/
+typedef UINT8 (tBTM_SP_CALLBACK) (tBTM_SP_EVT event, tBTM_SP_EVT_DATA *p_data);
+
+
+typedef void (tBTM_MKEY_CALLBACK) (BD_ADDR bd_addr, UINT8 status, UINT8 key_flag) ;
+
+/* Encryption enabled/disabled complete: Optionally passed with BTM_SetEncryption.
+** Parameters are
+**              BD Address of remote
+**              optional data passed in by BTM_SetEncryption
+**              tBTM_STATUS - result of the operation
+*/
+typedef void (tBTM_SEC_CBACK) (BD_ADDR bd_addr, void *p_ref_data, tBTM_STATUS result);
+
+/* Bond Cancel complete. Parameters are
+**              Result of the cancel operation
+**
+*/
+typedef void (tBTM_BOND_CANCEL_CMPL_CALLBACK) (tBTM_STATUS result);
+
+/* LE related event and data structure
+*/
+enum
+{
+    BTM_LE_IO_REQ_EVT = 1,      /* received IO_CAPABILITY_REQUEST event */
+    BTM_LE_SEC_REQUEST_EVT, /* security request event */
+    BTM_LE_KEY_NOTIF_EVT,   /* received USER_PASSKEY_NOTIFY event */
+    BTM_LE_KEY_REQ_EVT,     /* received USER_PASSKEY_REQUEST event */
+    BTM_LE_OOB_REQ_EVT,     /* OOB data request event */
+    BTM_LE_COMPLT_EVT,      /* received SIMPLE_PAIRING_COMPLETE event */
+    BTM_LE_KEY_EVT         /* KEY update event */
+};
+typedef UINT8 tBTM_LE_EVT;
+
+#define BTM_LE_KEY_PENC      SMP_SEC_KEY_TYPE_ENC        /* encryption information of peer device */
+#define BTM_LE_KEY_PID       SMP_SEC_KEY_TYPE_ID         /* identity key of the peer device */
+#define BTM_LE_KEY_PCSRK      SMP_SEC_KEY_TYPE_CSRK        /* peer SRK */
+#define BTM_LE_KEY_LENC      (SMP_SEC_KEY_TYPE_ENC << 3)       /* master role security information:div */
+#define BTM_LE_KEY_LID       (SMP_SEC_KEY_TYPE_ID << 3)        /* master device ID key */
+#define BTM_LE_KEY_LCSRK     (SMP_SEC_KEY_TYPE_CSRK << 3)       /* local CSRK has been deliver to peer */
+typedef UINT8 tBTM_LE_KEY_TYPE;
+
+#define BTM_LE_AUTH_REQ_NO_BOND SMP_AUTH_NO_BOND   /* 0 */
+#define BTM_LE_AUTH_REQ_BOND    SMP_AUTH_GEN_BOND  /* 1 << 0 */
+#define BTM_LE_AUTH_REQ_MITM    SMP_AUTH_YN_BIT    /* 1 << 2 */
+typedef UINT8 tBTM_LE_AUTH_REQ;
+
+#define BTM_LE_AUTH_REQ_MASK SMP_AUTH_MASK  /* 0x03*/
+
+/* LE security level */
+#define BTM_LE_SEC_NONE             SMP_SEC_NONE
+#define BTM_LE_SEC_UNAUTHENTICATE   SMP_SEC_UNAUTHENTICATE
+#define BTM_LE_SEC_AUTHENTICATED    SMP_SEC_AUTHENTICATED
+typedef UINT8 tBTM_LE_SEC;
+
+
+typedef struct
+{
+    tBTM_IO_CAP         io_cap;         /* local IO capabilities */
+    UINT8               oob_data;       /* OOB data present (locally) for the peer device */
+    tBTM_LE_AUTH_REQ    auth_req;       /* Authentication request (for local device) contain bonding and MITM info */
+    UINT8               max_key_size;   /* max encryption key size */
+    tBTM_LE_KEY_TYPE    init_keys;      /* keys to be distributed, bit mask */
+    tBTM_LE_KEY_TYPE    resp_keys;      /* keys to be distributed, bit mask */
+} tBTM_LE_IO_REQ;
+
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+/* data type for tBTM_LE_COMPLT */
+typedef struct
+{
+    UINT8       reason;
+    UINT8       sec_level;
+}tBTM_LE_COMPLT;
+#endif
+
+/* BLE encryption keys */
+typedef struct
+{
+    BT_OCTET16  ltk;
+    BT_OCTET8   rand;
+    UINT16      ediv;
+    UINT8       sec_level;
+    UINT8       key_size;
+}tBTM_LE_PENC_KEYS;
+
+/* BLE CSRK keys */
+typedef struct
+{
+    UINT32          counter;
+    BT_OCTET16      csrk;
+    UINT8           sec_level;
+}tBTM_LE_PCSRK_KEYS;
+
+/* BLE Encryption reproduction keys */
+typedef struct
+{
+    UINT16      div;
+    UINT8       key_size;
+    UINT8       sec_level;
+}tBTM_LE_LENC_KEYS;
+
+/* BLE SRK keys */
+typedef struct
+{
+    UINT32          counter;
+    UINT16          div;
+    UINT8           sec_level;
+
+}tBTM_LE_LCSRK_KEYS;
+
+
+typedef union
+{
+    tBTM_LE_PENC_KEYS   penc_key;       /* received peer encryption key */
+    tBTM_LE_PCSRK_KEYS   pcsrk_key;       /* received peer device SRK */
+    BT_OCTET16          pid_key;        /* peer device ID key */
+    tBTM_LE_LENC_KEYS   lenc_key;       /* local encryption reproduction keys LTK = = d1(ER,DIV,0)*/
+    tBTM_LE_LCSRK_KEYS   lcsrk_key;      /* local device CSRK = d1(ER,DIV,1)*/
+}tBTM_LE_KEY_VALUE;
+
+typedef struct
+{
+    tBTM_LE_KEY_TYPE        key_type;
+    tBTM_LE_KEY_VALUE       *p_key_value;
+}tBTM_LE_KEY;
+
+typedef union
+{
+    tBTM_LE_IO_REQ      io_req;     /* BTM_LE_IO_REQ_EVT      */
+    UINT32              key_notif;  /* BTM_LE_KEY_NOTIF_EVT   */
+                                    /* no callback dta for BTM_LE_KEY_REQ_EVT & BTM_LE_OOB_REQ_EVT  */
+#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
+    tBTM_LE_COMPLT      complt;     /* BTM_LE_COMPLT_EVT      */
+#endif
+    tBTM_LE_KEY         key;
+} tBTM_LE_EVT_DATA;
+
+/* Simple Pairing Events.  Called by the stack when Simple Pairing related
+** events occur.
+*/
+typedef UINT8 (tBTM_LE_CALLBACK) (tBTM_LE_EVT event, BD_ADDR bda, tBTM_LE_EVT_DATA *p_data);
+
+#define BTM_BLE_KEY_TYPE_ID         1
+#define BTM_BLE_KEY_TYPE_ER         2
+#define BTM_BLE_KEY_TYPE_COUNTER    3  //tobe obsolete
+
+typedef struct
+{
+    BT_OCTET16       ir;
+    BT_OCTET16       irk;
+    BT_OCTET16       dhk;
+
+}tBTM_BLE_LOCAL_ID_KEYS;
+
+typedef union
+{
+    tBTM_BLE_LOCAL_ID_KEYS  id_keys;
+    BT_OCTET16              er;
+}tBTM_BLE_LOCAL_KEYS;
+
+
+/* New LE identity key for local device.
+*/
+typedef void (tBTM_LE_KEY_CALLBACK) (UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
+
+
+/***************************
+**  Security Manager Types
+****************************/
+/* Structure that applications use to register with BTM_SecRegister */
+typedef struct
+{
+    tBTM_AUTHORIZE_CALLBACK     *p_authorize_callback;
+    tBTM_PIN_CALLBACK           *p_pin_callback;
+    tBTM_LINK_KEY_CALLBACK      *p_link_key_callback;
+    tBTM_LINK_KEY_REQ_CALLBACK  *p_link_key_req_callback;
+    tBTM_AUTH_COMPLETE_CALLBACK *p_auth_complete_callback;
+    tBTM_ABORT_CALLBACK         *p_abort_callback;
+    tBTM_BOND_CANCEL_CMPL_CALLBACK *p_bond_cancel_cmpl_callback;
+    tBTM_SP_CALLBACK            *p_sp_callback;
+#if BLE_INCLUDED == TRUE
+#if SMP_INCLUDED == TRUE
+    tBTM_LE_CALLBACK            *p_le_callback;
+#endif
+    tBTM_LE_KEY_CALLBACK        *p_le_key_callback;
+#endif
+} tBTM_APPL_INFO;
+
+/* Callback function for when a link supervision timeout event occurs.
+** This asynchronous event is enabled/disabled by calling BTM_RegForLstoEvt().
+*/
+typedef void (tBTM_LSTO_CBACK) (BD_ADDR remote_bda, UINT16 timeout);
+
+/*****************************************************************************
+**  POWER MANAGEMENT
+*****************************************************************************/
+/****************************
+**  Power Manager Constants
+*****************************/
+/* BTM Power manager status codes */
+enum
+{
+    BTM_PM_STS_ACTIVE = HCI_MODE_ACTIVE,
+    BTM_PM_STS_HOLD   = HCI_MODE_HOLD,
+    BTM_PM_STS_SNIFF  = HCI_MODE_SNIFF,
+    BTM_PM_STS_PARK   = HCI_MODE_PARK,
+    BTM_PM_STS_SSR,     /* report the SSR parameters in HCI_SNIFF_SUB_RATE_EVT */
+    BTM_PM_STS_PENDING,   /* when waiting for status from controller */
+    BTM_PM_STS_ERROR   /* when HCI command status returns error */
+};
+typedef UINT8 tBTM_PM_STATUS;
+
+/* BTM Power manager modes */
+enum
+{
+    BTM_PM_MD_ACTIVE = BTM_PM_STS_ACTIVE,
+    BTM_PM_MD_HOLD   = BTM_PM_STS_HOLD,
+    BTM_PM_MD_SNIFF  = BTM_PM_STS_SNIFF,
+    BTM_PM_MD_PARK   = BTM_PM_STS_PARK,
+    BTM_PM_MD_FORCE  = 0x10 /* OR this to force ACL link to a certain mode */
+};
+typedef UINT8 tBTM_PM_MODE;
+
+#define BTM_PM_SET_ONLY_ID  0x80
+
+/* Operation codes */
+#define BTM_PM_REG_SET      1 /* The module wants to set the desired power mode */
+#define BTM_PM_REG_NOTIF    2 /* The module wants to receive mode change event */
+#define BTM_PM_DEREG        4 /* The module does not want to involve with PM anymore */
+
+/************************
+**  Power Manager Types
+*************************/
+typedef struct
+{
+    UINT16          max;
+    UINT16          min;
+    UINT16          attempt;
+    UINT16          timeout;
+    tBTM_PM_MODE    mode;
+} tBTM_PM_PWR_MD;
+
+/*************************************
+**  Power Manager Callback Functions
+**************************************/
+typedef void (tBTM_PM_STATUS_CBACK) (BD_ADDR p_bda, tBTM_PM_STATUS status,
+                                     UINT16 value, UINT8 hci_status);
+
+
+/************************
+**  Stored Linkkey Types
+*************************/
+#define BTM_CB_EVT_RETURN_LINK_KEYS         1
+#define BTM_CB_EVT_READ_STORED_LINK_KEYS    2
+#define BTM_CB_EVT_WRITE_STORED_LINK_KEYS   3
+#define BTM_CB_EVT_DELETE_STORED_LINK_KEYS  4
+
+typedef struct
+{
+    UINT8          event;
+
+} tBTM_STORED_LINK_KEYS_EVT;
+
+
+typedef struct
+{
+    UINT8          event;
+    UINT8          num_keys;
+
+} tBTM_RETURN_LINK_KEYS_EVT;
+
+
+typedef struct
+{
+    BD_ADDR         bd_addr;
+    LINK_KEY        link_key;
+
+} tBTM_BD_ADDR_LINK_KEY_PAIR;
+
+
+typedef struct
+{
+    UINT8          event;
+    UINT8          status;
+    UINT16         max_keys;
+    UINT16         read_keys;
+
+} tBTM_READ_STORED_LINK_KEY_COMPLETE;
+
+
+typedef struct
+{
+    UINT8          event;
+    UINT8          status;
+    UINT8          num_keys;
+
+} tBTM_WRITE_STORED_LINK_KEY_COMPLETE;
+
+
+typedef struct
+{
+    UINT8          event;
+    UINT8          status;
+    UINT16         num_keys;
+
+} tBTM_DELETE_STORED_LINK_KEY_COMPLETE;
+
+
+/* These macros are defined to check the Broadcom features supported in controller
+ * (the return value for BTM_ReadBrcmFeatures() */
+/* multi-av */
+#define BTM_FEATURE_MULTI_AV_MASK 0x01
+#define BTM_FEATURE_MULTI_AV_OFF  0
+#define BTM_VSC_MULTI_AV_SUPPORTED(x) ((x)[BTM_FEATURE_MULTI_AV_OFF] & BTM_FEATURE_MULTI_AV_MASK)
+
+/* WBS SBC codec */
+#define BTM_FEATURE_WBS_SBC_MASK 0x02
+#define BTM_FEATURE_WBS_SBC_OFF  0
+#define BTM_VSC_WBS_SBC_SUPPORTED(x) ((x)[BTM_FEATURE_WBS_SBC_OFF] & BTM_FEATURE_WBS_SBC_MASK)
+
+/* Advanced Audio LC-PLC */
+#define BTM_FEATURE_AUDIO_LC_PLC_MASK 0x04
+#define BTM_FEATURE_AUDIO_LC_PLC_OFF  0
+#define BTM_VSC_AUDIO_LC_PLC_SUPPORTED(x) ((x)[BTM_FEATURE_AUDIO_LC_PLC_OFF] & BTM_FEATURE_AUDIO_LC_PLC_MASK)
+
+/* Light stack for audio routing in Controller */
+#define BTM_FEATURE_LIGHT_STACK_MASK 0x08
+#define BTM_FEATURE_LIGHT_STACK_OFF  0
+#define BTM_VSC_LIGHT_STACK_SUPPORTED(x) ((x)[BTM_FEATURE_LIGHT_STACK_OFF] & BTM_FEATURE_LIGHT_STACK_MASK)
+
+/* NFC support */
+#define BTM_FEATURE_NFC_MASK        (HCI_BRCM_FEATURE_NFC_MASK) /* 0x10 */
+#define BTM_FEATURE_NFC_OFF         (HCI_BRCM_FEATURE_NFC_OFF)  /* 0    */
+#define BTM_VSC_NFC_SUPPORTED(x) ((x)[BTM_FEATURE_NFC_OFF] & BTM_FEATURE_NFC_MASK)
+
+
+/************************
+**  Dual-Stack support
+*************************/
+/* BTM_SYNC_FAIL_EVT reason codes */
+#define BTM_SYNC_SUCCESS                    0
+#define BTM_SYNC_FAIL_BTE_SWITCH_REJECTED   1
+#define BTM_SYNC_FAIL_TRANS_PAUSE           2
+#define BTM_SYNC_FAIL_CORE_SYNC             3
+#define BTM_SYNC_FAIL_BTA_SYNC              4
+#define BTM_SYNC_FAIL_TRANS_RESUME          5
+#define BTM_SYNC_FAIL_RESYNC                6
+#define BTM_SYNC_FAIL_ERROR                 7
+#define BTM_SYNC_FAIL_UIPC_OPEN             8
+typedef UINT8 tBTM_SYNC_STATUS;
+
+/* Direction of sync (used by BTM_SyncStack) */
+#define BTM_SW_BB_TO_MM     0
+#define BTM_SW_TO_BB        1   /* Switch back to baseband stack (from either MM or BTC host) */
+#define BTM_SW_RESYNC       2
+#define BTM_SW_BB_TO_BTC    3   /* Switch from baseband stack to Bluetooth Controller Host stack */
+#define BTM_SW_MM_TO_BB     4
+#define BTM_SW_BTC_TO_BB    5
+typedef UINT8 tBTM_SW_DIR;
+
+/* Stack synchronization events (returned by tBTM_SYNC_STACK_CBACK callback) */
+#define BTM_SYNC_CPLT_EVT   0
+#define BTM_SYNC_BTA_EVT    1
+#define BTM_RESYNC_CPLT_EVT 2
+#define BTM_UIPC_OPENED_EVT 3
+#define BTM_UIPC_CLOSED_EVT 4
+typedef UINT8 tBTM_SYNC_STACK_EVT;
+
+/* Synchronization info from BTA/application that will be sent when calling BTE sync request functions */
+typedef struct
+{
+    tBTM_SW_DIR dir;
+    UINT16      lcid[BTM_SYNC_INFO_NUM_STR];
+    UINT8       avdt_handle[BTM_SYNC_INFO_NUM_STR];
+} tBTM_SYNC_INFO;
+
+/* Stack synchonization callback function
+** Parameters are
+**              event:  stack synchronization event
+**              status: BTM_SUCCESS if event was successful
+*/
+typedef void (*tBTM_SYNC_STACK_CBACK)(tBTM_SYNC_STACK_EVT event, tBTM_SYNC_STATUS status);
+
+
+/* Sync complete callback function. Called by bte layers after synchronization is complete
+** so that BTM_SYNC can procede with the next step for switching stack to MM
+**
+** Parameters are
+**              status: BTM_SUCCESS if synchronization was successful
+*/
+typedef void (*tBTM_SYNC_CPLT_CBACK)(tBTM_STATUS status);
+
+
+
+/* IPC event callback function. Called by BTM when an IPC event is received.
+** These events are currently sent to DM through the callback function.
+**
+** Parameters are
+**              status: BTM_SUCCESS if synchronization was successful
+**              p_data: Actual message in the IPC
+*/
+typedef void (tBTM_IPC_EVT_CBACK)(tBTM_STATUS status, BT_HDR *p_data);
+
+/* MIP evnets, callbacks    */
+enum
+{
+    BTM_MIP_MODE_CHG_EVT,
+    BTM_MIP_DISCONNECT_EVT,
+    BTM_MIP_PKTS_COMPL_EVT,
+    BTM_MIP_RXDATA_EVT
+};
+typedef UINT8 tBTM_MIP_EVT;
+
+typedef struct
+{
+    tBTM_MIP_EVT    event;
+    BD_ADDR         bd_addr;
+    UINT16          mip_id;
+} tBTM_MIP_MODE_CHANGE;
+
+typedef struct
+{
+    tBTM_MIP_EVT    event;
+    UINT16          mip_id;
+    UINT8           disc_reason;
+} tBTM_MIP_CONN_TIMEOUT;
+
+#define BTM_MIP_MAX_RX_LEN  17
+
+typedef struct
+{
+    tBTM_MIP_EVT    event;
+    UINT16          mip_id;
+    UINT8           rx_len;
+    UINT8           rx_data[BTM_MIP_MAX_RX_LEN];
+} tBTM_MIP_RXDATA;
+
+typedef struct
+{
+    tBTM_MIP_EVT    event;
+    BD_ADDR         bd_addr;
+    UINT8           data[11];       /* data[0] shows Vender-specific device type */
+} tBTM_MIP_EIR_HANDSHAKE;
+
+typedef struct
+{
+    tBTM_MIP_EVT    event;
+    UINT16          num_sent;       /* Number of packets completed at the controller */
+} tBTM_MIP_PKTS_COMPL;
+
+typedef union
+{
+    tBTM_MIP_EVT            event;
+    tBTM_MIP_MODE_CHANGE    mod_chg;
+    tBTM_MIP_CONN_TIMEOUT   conn_tmo;
+    tBTM_MIP_EIR_HANDSHAKE  eir;
+    tBTM_MIP_PKTS_COMPL     completed;
+    tBTM_MIP_RXDATA         rxdata;
+} tBTM_MIP_EVENT_DATA;
+
+/* MIP event callback function  */
+typedef void (tBTM_MIP_EVENTS_CB) (tBTM_MIP_EVT event, tBTM_MIP_EVENT_DATA data);
+
+/* MIP Device query callback function  */
+typedef BOOLEAN (tBTM_MIP_QUERY_CB) (BD_ADDR dev_addr, UINT8 *p_mode, LINK_KEY link_key);
+
+/*****************************************************************************
+**  EXTERNAL FUNCTION DECLARATIONS
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*****************************************************************************
+**  DEVICE CONTROL and COMMON FUNCTIONS
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         BTM_SetAfhChannels
+**
+** Description      This function is called to disable channels
+**
+** Returns          status
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetAfhChannels (UINT8 first, UINT8 last);
+
+/*******************************************************************************
+**
+** Function         BTM_SetAfhChannelAssessment
+**
+** Description      This function is called to set the channel assessment mode on or off
+**
+** Returns          status
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetAfhChannelAssessment (BOOLEAN enable_or_disable);
+
+/*******************************************************************************
+**
+** Function         BTM_DeviceReset
+**
+** Description      This function is called to reset the controller.The Callback function
+**                  if provided is called when startup of the device has
+**                  completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_DeviceReset (tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_IsDeviceUp
+**
+** Description      This function is called to check if the device is up.
+**
+** Returns          TRUE if device is up, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_IsDeviceUp (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetLocalDeviceName
+**
+** Description      This function is called to set the local device name.
+**
+** Returns          BTM_CMD_STARTED if successful, otherwise an error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetLocalDeviceName (char *p_name);
+
+/*******************************************************************************
+**
+** Function         BTM_SetDeviceClass
+**
+** Description      This function is called to set the local device class
+**
+** Returns          BTM_SUCCESS if successful, otherwise an error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_SetDeviceClass (DEV_CLASS dev_class);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceName
+**
+** Description      This function is called to read the local device name.
+**
+** Returns          status of the operation
+**                  If success, BTM_SUCCESS is returned and p_name points stored
+**                              local device name
+**                  If BTM doesn't store local device name, BTM_NO_RESOURCES is
+**                              is returned and p_name is set to NULL
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceName (char **p_name);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceNameFromController
+**
+** Description      Get local device name from controller. Do not use cached
+**                  name (used to get chip-id prior to btm reset complete).
+**
+** Returns          BTM_CMD_STARTED if successful, otherwise an error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceNameFromController (tBTM_CMPL_CB *p_rln_cmpl_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalVersion
+**
+** Description      This function is called to read the local device version
+**
+** Returns          BTM_SUCCESS if successful, otherwise an error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLocalVersion (tBTM_VERSION_INFO *p_vers);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalDeviceAddr
+**
+** Description      This function is called to read the local device address
+**
+** Returns          BTM_SUCCESS
+**                  Callback returns the local device address
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLocalDeviceAddr (tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetLocalDeviceAddr
+**
+** Description      This function is called to read the local device address
+**
+** Returns          void
+**                  the local device address is copied into bd_addr
+**
+*******************************************************************************/
+    BTM_API extern void BTM_GetLocalDeviceAddr (BD_ADDR bd_addr);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDeviceClass
+**
+** Description      This function is called to read the local device class
+**
+** Returns          pointer to the device class
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_ReadDeviceClass (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalFeatures
+**
+** Description      This function is called to read the local features
+**
+** Returns          pointer to the local features string
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_ReadLocalFeatures (void);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadBrcmFeatures
+**
+** Description      This function is called to read the Broadcom specific features
+**
+** Returns          pointer to the Broadcom features string
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_ReadBrcmFeatures (void);
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterForDeviceStatusNotif
+**
+** Description      This function is called to register for device status
+**                  change notifications.
+**
+** Returns          pointer to previous caller's callback function or NULL if first
+**                  registration.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_DEV_STATUS_CB *BTM_RegisterForDeviceStatusNotif (tBTM_DEV_STATUS_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterForVSEvents
+**
+** Description      This function is called to register/deregister for vendor
+**                  specific HCI events.
+**
+**                  If is_register=TRUE, then the function will be registered;
+**                  if is_register=FALSE, then the function will be deregistered.
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_BUSY if maximum number of callbacks have already been
+**                           registered.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_RegisterForVSEvents (tBTM_VS_EVT_CB *p_cb, BOOLEAN is_register);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ContinueReset
+**
+** Description      Instructs stack to continue its stack initialization after
+**                  an application has completed any vender specific commands
+**                  sent to the controller.
+**
+**                  Note: This function is only called if an application
+**                      initialization function has been inserted in the reset
+**                      sequence.  (BTM_APP_DEV_INIT is defined with a function).
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_ContinueReset (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_VendorSpecificCommand
+**
+** Description      Send a vendor specific HCI command to the controller.
+**
+** Returns
+**      BTM_SUCCESS         Command sent. Does not expect command complete
+**                              event. (command cmpl callback param is NULL)
+**      BTM_CMD_STARTED     Command sent. Waiting for command cmpl event.
+**      BTM_BUSY            Command not sent. Waiting for cmd cmpl event for
+**                              prior command.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_VendorSpecificCommand(UINT16 opcode,
+                                                         UINT8 param_len,
+                                                         UINT8 *p_param_buf,
+                                                         tBTM_VSC_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_AllocateSCN
+**
+** Description      Look through the Server Channel Numbers for a free one to be
+**                  used with an RFCOMM connection.
+**
+** Returns          Allocated SCN number or 0 if none.
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_AllocateSCN(void);
+
+// btla-specific ++
+/*******************************************************************************
+**
+** Function         BTM_TryAllocateSCN
+**
+** Description      Try to allocate a fixed server channel
+**
+** Returns          Returns TRUE if server channel was available
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_TryAllocateSCN(UINT8 scn);
+// btla-specific --
+
+
+/*******************************************************************************
+**
+** Function         BTM_FreeSCN
+**
+** Description      Free the specified SCN.
+**
+** Returns          TRUE if successful, FALSE if SCN is not in use or invalid
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_FreeSCN(UINT8 scn);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetTraceLevel
+**
+** Description      This function sets the trace level for BTM.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_SetTraceLevel (UINT8 new_level);
+
+
+/*******************************************************************************
+**
+** Function         BTM_WritePageTimeout
+**
+** Description      Send HCI Wite Page Timeout.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES    If out of resources to send the command.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_WritePageTimeout(UINT16 timeout);
+
+/*******************************************************************************
+**
+** Function         BTM_WriteVoiceSettings
+**
+** Description      Send HCI Write Voice Settings command.
+**                  See hcidefs.h for settings bitmask values.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES     If out of resources to send the command.
+**
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_WriteVoiceSettings(UINT16 settings);
+
+/*******************************************************************************
+**
+** Function         BTM_EnableTestMode
+**
+** Description      Send HCI the enable device under test command.
+**
+**                  Note: Controller can only be taken out of this mode by
+**                      resetting the controller.
+**
+** Returns
+**      BTM_SUCCESS         Command sent.
+**      BTM_NO_RESOURCES    If out of resources to send the command.
+**
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_EnableTestMode(void);
+
+
+/*****************************************************************************
+**  DEVICE DISCOVERY FUNCTIONS - Inquiry, Remote Name, Discovery, Class of Device
+*****************************************************************************/
+
+/*******************************************************************************
+**
+** Function         BTM_SetDiscoverability
+**
+** Description      This function is called to set the device into or out of
+**                  discoverable mode. Discoverable mode means inquiry
+**                  scans are enabled.  If a value of '0' is entered for window or
+**                  interval, the default values are used.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_BUSY if a setting of the filter is already in progress
+**                  BTM_NO_RESOURCES if couldn't get a memory pool buffer
+**                  BTM_ILLEGAL_VALUE if a bad parameter was detected
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_SetDiscoverability (UINT16 inq_mode, UINT16 window,
+                                                        UINT16 interval);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDiscoverability
+**
+** Description      This function is called to read the current discoverability
+**                  mode of the device.
+**
+** Output Params:   p_window - current inquiry scan duration
+**                  p_interval - current inquiry scan interval
+**
+** Returns          BTM_NON_DISCOVERABLE, BTM_LIMITED_DISCOVERABLE, or
+**                  BTM_GENERAL_DISCOVERABLE
+**
+*******************************************************************************/
+    BTM_API extern UINT16       BTM_ReadDiscoverability (UINT16 *p_window,
+                                                         UINT16 *p_interval);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPeriodicInquiryMode
+**
+** Description      This function is called to set the device periodic inquiry mode.
+**                  If the duration is zero, the periodic inquiry mode is cancelled.
+**
+** Parameters:      p_inqparms - pointer to the inquiry information
+**                      mode - GENERAL or LIMITED inquiry
+**                      duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED)
+**                      max_resps - maximum amount of devices to search for before ending the inquiry
+**                      filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or
+**                                         BTM_FILTER_COND_BD_ADDR
+**                      filter_cond - value for the filter (based on filter_cond_type)
+**
+**                  max_delay - maximum amount of time between successive inquiries
+**                  min_delay - minimum amount of time between successive inquiries
+**                  p_results_cb - callback returning pointer to results (tBTM_INQ_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully started
+**                  BTM_ILLEGAL_VALUE if a bad parameter is detected
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_SUCCESS - if cancelling the periodic inquiry
+**                  BTM_BUSY - if an inquiry is already active
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_SetPeriodicInquiryMode (tBTM_INQ_PARMS *p_inqparms,
+                                                            UINT16 max_delay, UINT16 min_delay,
+                                                            tBTM_INQ_RESULTS_CB *p_results_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_StartInquiry
+**
+** Description      This function is called to start an inquiry.
+**
+** Parameters:      p_inqparms - pointer to the inquiry information
+**                      mode - GENERAL or LIMITED inquiry
+**                      duration - length in 1.28 sec intervals (If '0', the inquiry is CANCELLED)
+**                      max_resps - maximum amount of devices to search for before ending the inquiry
+**                      filter_cond_type - BTM_CLR_INQUIRY_FILTER, BTM_FILTER_COND_DEVICE_CLASS, or
+**                                         BTM_FILTER_COND_BD_ADDR
+**                      filter_cond - value for the filter (based on filter_cond_type)
+**
+**                  p_results_cb   - Pointer to the callback routine which gets called
+**                                upon receipt of an inquiry result. If this field is
+**                                NULL, the application is not notified.
+**
+**                  p_cmpl_cb   - Pointer to the callback routine which gets called
+**                                upon completion.  If this field is NULL, the
+**                                application is not notified when completed.
+** Returns          tBTM_STATUS
+**                  BTM_CMD_STARTED if successfully initiated
+**                  BTM_BUSY if already in progress
+**                  BTM_ILLEGAL_VALUE if parameter(s) are out of range
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_StartInquiry (tBTM_INQ_PARMS *p_inqparms,
+                                                  tBTM_INQ_RESULTS_CB *p_results_cb,
+                                                  tBTM_CMPL_CB *p_cmpl_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_IsInquiryActive
+**
+** Description      This function returns a bit mask of the current inquiry state
+**
+** Returns          BTM_INQUIRY_INACTIVE if inactive (0)
+**                  BTM_LIMITED_INQUIRY_ACTIVE if a limted inquiry is active
+**                  BTM_GENERAL_INQUIRY_ACTIVE if a general inquiry is active
+**                  BTM_PERIODIC_INQUIRY_ACTIVE if a periodic inquiry is active
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_IsInquiryActive (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelInquiry
+**
+** Description      This function cancels an inquiry if active
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CancelInquiry(void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelPeriodicInquiry
+**
+** Description      This function cancels a periodic inquiry
+**
+** Returns
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_SUCCESS - if cancelling the periodic inquiry
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CancelPeriodicInquiry(void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryFilterCallback
+**
+** Description      Host can register to be asked whenever an inquiry result
+**                  is received.  If host does not like the device no name
+**                  request is issued for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetInquiryFilterCallback(tBTM_FILTER_CB *p_callback);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetConnectability
+**
+** Description      This function is called to set the device into or out of
+**                  connectable mode. Discoverable mode means page scans enabled.
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_ILLEGAL_VALUE if a bad parameter is detected
+**                  BTM_NO_RESOURCES if could not allocate a message buffer
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetConnectability (UINT16 page_mode, UINT16 window,
+                                                      UINT16 interval);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadConnectability
+**
+** Description      This function is called to read the current discoverability
+**                  mode of the device.
+** Output Params    p_window - current page scan duration
+**                  p_interval - current time between page scans
+**
+** Returns          BTM_NON_CONNECTABLE or BTM_CONNECTABLE
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadConnectability (UINT16 *p_window, UINT16 *p_interval);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryMode
+**
+** Description      This function is called to set standard, with RSSI
+**                  mode or extended of the inquiry for local device.
+**
+** Input Params:    BTM_INQ_RESULT_STANDARD, BTM_INQ_RESULT_WITH_RSSI or
+**                  BTM_INQ_RESULT_EXTENDED
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_NO_RESOURCES if couldn't get a memory pool buffer
+**                  BTM_ILLEGAL_VALUE if a bad parameter was detected
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BT_API extern tBTM_STATUS  BTM_SetInquiryMode (UINT8 mode);
+
+/*******************************************************************************
+**
+** Function         BTM_SetInquiryScanType
+**
+** Description      This function is called to set the iquiry scan-type to
+**                  standard or interlaced.
+**
+** Input Params:    BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_MODE_UNSUPPORTED if not a 1.2 device
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BT_API extern tBTM_STATUS BTM_SetInquiryScanType (UINT16 scan_type);
+
+/*******************************************************************************
+**
+** Function         BTM_SetPageScanType
+**
+** Description      This function is called to set the page scan-type to
+**                  standard or interlaced.
+**
+** Input Params:    BTM_SCAN_TYPE_STANDARD or BTM_SCAN_TYPE_INTERLACED
+**
+** Returns          BTM_SUCCESS if successful
+**                  BTM_MODE_UNSUPPORTED if not a 1.2 device
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+
+    BT_API extern tBTM_STATUS BTM_SetPageScanType (UINT16 scan_type);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteDeviceName
+**
+** Description      This function initiates a remote device HCI command to the
+**                  controller and calls the callback when the process has completed.
+**
+** Input Params:    remote_bda      - device address of name to retrieve
+**                  p_cb            - callback function called when BTM_CMD_STARTED
+**                                    is returned.
+**                                    A pointer to tBTM_REMOTE_DEV_NAME is passed to the
+**                                    callback.
+**
+** Returns
+**                  BTM_CMD_STARTED is returned if the request was successfully sent
+**                                  to HCI.
+**                  BTM_BUSY if already in progress
+**                  BTM_UNKNOWN_ADDR if device address is bad
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if the device is not up.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_ReadRemoteDeviceName (BD_ADDR remote_bda,
+                                                          tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelRemoteDeviceName
+**
+** Description      This function initiates the cancel request for the specified
+**                  remote device.
+**
+** Input Params:    None
+**
+** Returns
+**                  BTM_CMD_STARTED is returned if the request was successfully sent
+**                                  to HCI.
+**                  BTM_NO_RESOURCES if could not allocate resources to start the command
+**                  BTM_WRONG_MODE if there is not an active remote name request.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_CancelRemoteDeviceName (void);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteVersion
+**
+** Description      This function is called to read a remote device's version
+**
+** Returns          BTM_SUCCESS if successful, otherwise an error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadRemoteVersion (BD_ADDR addr,
+                                                      UINT8 *lmp_version,
+                                                      UINT16 *manufacturer,
+                                                      UINT16 *lmp_sub_version);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRemoteFeatures
+**
+** Description      This function is called to read a remote device's features
+**
+** Returns          pointer to the features string
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_ReadRemoteFeatures (BD_ADDR addr);
+
+/*******************************************************************************
+**
+** Function         BTM_InqFirstResult
+**
+** Description      This function looks through the inquiry database for the first
+**                  used entrysince the LAST inquiry. This is used in conjunction
+**                  with BTM_InqNext by applications as a way to walk through the
+**                  inquiry results database.
+**
+** Returns          pointer to first in-use entry, or NULL if DB is empty
+**
+*******************************************************************************/
+    BTM_API extern tBTM_INQ_INFO *BTM_InqFirstResult (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqNextResult
+**
+** Description      This function looks through the inquiry database for the next
+**                  used entrysince the LAST inquiry. If the input parameter is NULL,
+**                  the first entry is returned.
+**
+** Returns          pointer to next in-use entry, or NULL if no more found.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_INQ_INFO *BTM_InqNextResult (tBTM_INQ_INFO *p_cur);
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbRead
+**
+** Description      This function looks through the inquiry database for a match
+**                  based on Bluetooth Device Address. This is the application's
+**                  interface to get the inquiry details of a specific BD address.
+**
+** Returns          pointer to entry, or NULL if not found
+**
+*******************************************************************************/
+    BTM_API extern tBTM_INQ_INFO *BTM_InqDbRead (BD_ADDR p_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbFirst
+**
+** Description      This function looks through the inquiry database for the first
+**                  used entry, and returns that. This is used in conjunction with
+**                  BTM_InqDbNext by applications as a way to walk through the
+**                  inquiry database.
+**
+** Returns          pointer to first in-use entry, or NULL if DB is empty
+**
+*******************************************************************************/
+    BTM_API extern tBTM_INQ_INFO *BTM_InqDbFirst (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_InqDbNext
+**
+** Description      This function looks through the inquiry database for the next
+**                  used entry, and returns that.  If the input parameter is NULL,
+**                  the first entry is returned.
+**
+** Returns          pointer to next in-use entry, or NULL if no more found.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_INQ_INFO *BTM_InqDbNext (tBTM_INQ_INFO *p_cur);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ClearInqDb
+**
+** Description      This function is called to clear out a device or all devices
+**                  from the inquiry database.
+**
+** Parameter        p_bda - (input) BD_ADDR ->  Address of device to clear
+**                                              (NULL clears all entries)
+**
+** Returns          BTM_BUSY if an inquiry, get remote name, or event filter
+**                          is active, otherwise BTM_SUCCESS
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_ClearInqDb (BD_ADDR p_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadNumInqDbEntries
+**
+** Returns          This function returns the number of entries in the inquiry database.
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_ReadNumInqDbEntries (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_InquiryRegisterForChanges
+**
+** Description      This function is called to register a callback for when the
+**                  inquiry database changes, i.e. new entry or entry deleted.
+**
+** Returns          BTM_SUCCESS if successful, otherwise error code
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_InquiryRegisterForChanges (tBTM_INQ_DB_CHANGE_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadInquiryRspTxPower
+**
+** Description      This command will read the inquiry Transmit Power level used
+**                  to transmit the FHS and EIR data packets.
+**                  This can be used directly in the Tx Power Level EIR data type.
+**
+** Returns          BTM_SUCCESS if successful
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadInquiryRspTxPower (tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_WriteInquiryTxPower
+**
+** Description      This command is used to write the inquiry transmit power level
+**                  used to transmit the inquiry (ID) data packets. The Controller
+**                  should use the supported TX power level closest to the Tx_Power
+**                  parameter.
+**
+** Returns          BTM_SUCCESS if successful
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS  BTM_WriteInquiryTxPower (INT8 tx_power);
+
+/*******************************************************************************
+**
+** Function         BTM_StartDiscovery
+**
+** Description      This function is called by an application (or profile)
+**                  when it wants to trigger an service discovery using the
+**                  BTM's discovery database.
+**
+** Returns          tBTM_STATUS
+**                      BTM_CMD_STARTED if the discovery was initiated
+**                      BTM_BUSY if one is already in progress
+**                      BTM_UNKNOWN_ADDR if no addresses are in the INQ DB
+**                      BTM_ERR_PROCESSING if err initiating the command
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_StartDiscovery (tBTM_CMPL_CB *p_cmpl_cb,
+                                                   BD_ADDR_PTR p_rem_addr);
+
+
+/*******************************************************************************
+**
+** Function         BTM_FindAttribute
+**
+** Description      This function is called by an application (or profile)
+**                  when it wants to see if an attribute exists in the BTM
+**                  discovery database.
+**
+** Returns          Pointer to matching record, or NULL
+**
+*******************************************************************************/
+    BTM_API extern tSDP_DISC_REC *BTM_FindAttribute (UINT16 attr_id,
+                                                     tSDP_DISC_REC *p_start_rec);
+
+
+/*******************************************************************************
+**
+** Function         BTM_FindService
+**
+** Description      This function is called by an application (or profile)
+**                  when it wants to see if a service exists in the BTM
+**                  discovery database.
+**
+** Returns          Pointer to matching record, or NULL
+**
+*******************************************************************************/
+    BTM_API extern tSDP_DISC_REC *BTM_FindService (UINT16 service_uuid,
+                                                   tSDP_DISC_REC *p_start_rec);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetDiscoveryParams
+**
+** Description      This function is called to set the BTM default discovery parameters.
+**                  These UUID and attribute filters are used during the call to
+**                  BTM_StartDiscovery.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetDiscoveryParams (UINT16 num_uuid, tSDP_UUID *p_uuid_list,
+                                                UINT16 num_attr, UINT16 *p_attr_list);
+
+
+/*****************************************************************************
+**  ACL CHANNEL MANAGEMENT FUNCTIONS
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_SetLinkPolicy
+**
+** Description      Create and send HCI "Write Policy Set" command
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetLinkPolicy (BD_ADDR remote_bda,
+                                                  UINT16 *settings);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLinkPolicy
+**
+** Description      This function is called to read the link policy settings.
+**                  The address of link policy results are returned in the callback.
+**                  (tBTM_LNK_POLICY_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLinkPolicy (BD_ADDR remote_bda,
+                                                   tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetDefaultLinkPolicy
+**
+** Description      Set the default value for HCI "Write Policy Set" command
+**                  to use when an ACL link is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetDefaultLinkPolicy (UINT16 settings);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetDefaultLinkSuperTout
+**
+** Description      Set the default value for HCI "Write Link Supervision Timeout"
+**                  command to use when an ACL link is created.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetDefaultLinkSuperTout (UINT16 timeout);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetLinkSuperTout
+**
+** Description      Create and send HCI "Write Link Supervision Timeout" command
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetLinkSuperTout (BD_ADDR remote_bda,
+                                                     UINT16 timeout);
+
+/*******************************************************************************
+**
+** Function         BTM_RegForLstoEvt
+**
+** Description      register for the HCI "Link Supervision Timeout Change" event
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_RegForLstoEvt (tBTM_LSTO_CBACK *p_cback);
+
+
+/* These next APIs are available if the power manager is not compiled in */
+#if BTM_PWR_MGR_INCLUDED == FALSE
+/*******************************************************************************
+**
+** Function         BTM_SetHoldMode
+**
+** Description      This function is called to set a connection into hold mode.
+**                  A check is made if the connection is in sniff or park mode,
+**                  and if yes, the hold mode is ignored.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetHoldMode (BD_ADDR remote_bda, UINT16 min_interval,
+                                                UINT16 max_interval);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetSniffMode
+**
+** Description      This function is called to set a connection into sniff mode.
+**                  A check is made if the connection is already in sniff or park
+**                  mode, and if yes, the sniff mode is ignored.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetSniffMode (BD_ADDR remote_bda, UINT16 min_period,
+                                                 UINT16 max_period, UINT16 attempt,
+                                                 UINT16 timeout);
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelSniffMode
+**
+** Description      This function is called to put a connection out of sniff mode.
+**                  A check is made if the connection is already in sniff mode,
+**                  and if not, the cancel sniff mode is ignored.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CancelSniffMode (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetParkMode
+**
+** Description      This function is called to set a connection into park mode.
+**                  A check is made if the connection is already in sniff or park
+**                  mode, and if yes, the park mode is ignored.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetParkMode (BD_ADDR remote_bda,
+                                                UINT16 beacon_min_period,
+                                                UINT16 beacon_max_period);
+
+
+/*******************************************************************************
+**
+** Function         BTM_CancelParkMode
+**
+** Description      This function is called to put a connection out of park mode.
+**                  A check is made if the connection is already in park mode,
+**                  and if not, the cancel sniff mode is ignored.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CancelParkMode (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadAclMode
+**
+** Description      This returns the current mode for a specific
+**                  ACL connection.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**
+** Output Param     p_mode - address where the current mode is copied into.
+**                          BTM_ACL_MODE_NORMAL
+**                          BTM_ACL_MODE_HOLD
+**                          BTM_ACL_MODE_SNIFF
+**                          BTM_ACL_MODE_PARK
+**                          (valid only if return code is BTM_SUCCESS)
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadAclMode (BD_ADDR remote_bda, UINT8 *p_mode);
+
+#endif /* if BTM_PWR_MGR_INCLUDED == FALSE */
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPacketTypes
+**
+** Description      This function is set the packet types used for a specific
+**                  ACL connection,
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetPacketTypes (BD_ADDR remote_bda, UINT16 pkt_types);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadPacketTypes
+**
+** Description      This function is set the packet types used for the specified
+**                  ACL connection,
+**
+** Returns          packet types supported for the connection, or 0 if no BD address
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadPacketTypes (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_IsAclConnectionUp
+**
+** Description      This function is called to check if an ACL connection exists
+**                  to a specific remote BD Address.
+**
+** Returns          TRUE if connection is up, else FALSE.
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_IsAclConnectionUp (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetRole
+**
+** Description      This function is called to get the role of the local device
+**                  for the ACL connection with the specified remote device
+**
+** Returns          BTM_SUCCESS if connection exists.
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_GetRole (BD_ADDR remote_bd_addr, UINT8 *p_role);
+
+
+
+/*******************************************************************************
+**
+** Function         BTM_SwitchRole
+**
+** Description      This function is called to switch role between master and
+**                  slave.  If role is already set it will do nothing.  If the
+**                  command was initiated, the callback function is called upon
+**                  completion.
+**
+** Returns          BTM_SUCCESS if already in specified role.
+**                  BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_MODE_UNSUPPORTED if local device does not support role switching
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SwitchRole (BD_ADDR remote_bd_addr,
+                                               UINT8 new_role,
+                                               tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_ChangeLinkKey
+**
+** Description      This function is called to change the link key of the
+**                  connection.
+**
+** Returns          BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_BUSY if the previous command is not completed
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ChangeLinkKey (BD_ADDR remote_bd_addr,
+                                                  tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadRSSI
+**
+** Description      This function is called to read the link policy settings.
+**                  The address of link policy results are returned in the callback.
+**                  (tBTM_RSSI_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_BUSY if command is already in progress
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadRSSI (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadTxPower
+**
+** Description      This function is called to read the current connection
+**                  TX power of the connection. The TX power level results
+**                  are returned in the callback.
+**                  (tBTM_RSSI_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_BUSY if command is already in progress
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadTxPower (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLinkQuality
+**
+** Description      This function is called to read the link quality.
+**                  The value of the link quality is returned in the callback.
+**                  (tBTM_LINK_QUALITY_RESULTS)
+**
+** Returns          BTM_CMD_STARTED if command issued to controller.
+**                  BTM_NO_RESOURCES if couldn't allocate memory to issue command
+**                  BTM_UNKNOWN_ADDR if no active link with bd addr specified
+**                  BTM_BUSY if command is already in progress
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLinkQuality (BD_ADDR remote_bda, tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_RegBusyLevelNotif
+**
+** Description      This function is called to register a callback to receive
+**                  busy level change events.
+**
+** Returns          BTM_SUCCESS if successfully registered, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_RegBusyLevelNotif (tBTM_BL_CHANGE_CB *p_cb, UINT8 *p_level,
+                                                      tBTM_BL_EVENT_MASK evt_mask);
+
+/*******************************************************************************
+**
+** Function         BTM_AclRegisterForChanges
+**
+** Description      This function is called to register a callback to receive
+**                  ACL database change events, i.e. new connection or removed.
+**
+** Returns          BTM_SUCCESS if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_AclRegisterForChanges (tBTM_ACL_DB_CHANGE_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_GetNumAclLinks
+**
+** Description      This function is called to count the number of
+**                  ACL links that are active.
+**
+** Returns          UINT16  Number of active ACL links
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_GetNumAclLinks (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadClockOffset
+**
+** Description      This returns the clock offset for a specific
+**                  ACL connection.
+**
+** Returns          clock-offset or 0 if unknown
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadClockOffset (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetQoS
+**
+** Description      This function is called to setup QoS
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetQoS(BD_ADDR bd, FLOW_SPEC *p_flow,
+                                          tBTM_CMPL_CB *p_cb);
+
+
+/*****************************************************************************
+**  (e)SCO CHANNEL MANAGEMENT FUNCTIONS
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_CreateSco
+**
+** Description      This function is called to create an SCO connection. If the
+**                  "is_orig" flag is TRUE, the connection will be originated,
+**                  otherwise BTM will wait for the other side to connect.
+**
+** Returns          BTM_UNKNOWN_ADDR if the ACL connection is not up
+**                  BTM_BUSY         if another SCO being set up to
+**                                   the same BD address
+**                  BTM_NO_RESOURCES if the max SCO limit has been reached
+**                  BTM_CMD_STARTED  if the connection establishment is started.
+**                                   In this case, "*p_sco_inx" is filled in
+**                                   with the sco index used for the connection.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CreateSco (BD_ADDR remote_bda, BOOLEAN is_orig,
+                                              UINT16 pkt_types, UINT16 *p_sco_inx,
+                                              tBTM_SCO_CB *p_conn_cb,
+                                              tBTM_SCO_CB *p_disc_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_RemoveSco
+**
+** Description      This function is called to remove a specific SCO connection.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_RemoveSco (UINT16 sco_inx);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetScoPacketTypes
+**
+** Description      This function is called to set the packet types used for
+**                  a specific SCO connection,
+**
+** Parameters       pkt_types - One or more of the following
+**                  BTM_SCO_PKT_TYPES_MASK_HV1
+**                  BTM_SCO_PKT_TYPES_MASK_HV2
+**                  BTM_SCO_PKT_TYPES_MASK_HV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV4
+**                  BTM_SCO_PKT_TYPES_MASK_EV5
+**
+**                  BTM_SCO_LINK_ALL_MASK   - enables all supported types
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetScoPacketTypes (UINT16 sco_inx, UINT16 pkt_types);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoPacketTypes
+**
+** Description      This function is read the packet types used for a specific
+**                  SCO connection.
+**
+** Returns       One or more of the following (bitmask)
+**                  BTM_SCO_PKT_TYPES_MASK_HV1
+**                  BTM_SCO_PKT_TYPES_MASK_HV2
+**                  BTM_SCO_PKT_TYPES_MASK_HV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV3
+**                  BTM_SCO_PKT_TYPES_MASK_EV4
+**                  BTM_SCO_PKT_TYPES_MASK_EV5
+**
+** Returns          packet types supported for the connection
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadScoPacketTypes (UINT16 sco_inx);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDeviceScoPacketTypes
+**
+** Description      This function is read the SCO packet types that
+**                  the device supports.
+**
+** Returns          packet types supported by the device.
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadDeviceScoPacketTypes (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoHandle
+**
+** Description      This function is used to read the HCI handle used for a specific
+**                  SCO connection,
+**
+** Returns          handle for the connection, or 0xFFFF if invalid SCO index.
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadScoHandle (UINT16 sco_inx);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoBdAddr
+**
+** Description      This function is read the remote BD Address for a specific
+**                  SCO connection,
+**
+** Returns          pointer to BD address or NULL if not known
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_ReadScoBdAddr (UINT16 sco_inx);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadScoDiscReason
+**
+** Description      This function is returns the reason why an (e)SCO connection
+**                  has been removed. It contains the value until read, or until
+**                  another (e)SCO connection has disconnected.
+**
+** Returns          HCI reason or BTM_INVALID_SCO_DISC_REASON if not set.
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_ReadScoDiscReason (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetEScoMode
+**
+** Description      This function sets up the negotiated parameters for SCO or
+**                  eSCO, and sets as the default mode used for calls to
+**                  BTM_CreateSco.  It can be called only when there are no
+**                  active (e)SCO links.
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_BUSY if there are one or more active (e)SCO links.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetEScoMode (tBTM_SCO_TYPE sco_mode,
+                                                tBTM_ESCO_PARAMS *p_parms);
+
+/*******************************************************************************
+**
+** Function         BTM_SetWBSCodec
+**
+** Description      This function sends command to the controller to setup
+**                  WBS codec for the upcoming eSCO connection.
+**
+** Returns          BTM_SUCCESS.
+**
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_SetWBSCodec (tBTM_SCO_CODEC_TYPE codec_type);
+
+/*******************************************************************************
+**
+** Function         BTM_RegForEScoEvts
+**
+** Description      This function registers a SCO event callback with the
+**                  specified instance.  It should be used to received
+**                  connection indication events and change of link parameter
+**                  events.
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_ILLEGAL_VALUE if there is an illegal sco_inx
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_RegForEScoEvts (UINT16 sco_inx,
+                                                   tBTM_ESCO_CBACK *p_esco_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadEScoLinkParms
+**
+** Description      This function returns the current eSCO link parameters for
+**                  the specified handle.  This can be called anytime a connection
+**                  is active, but is typically called after receiving the SCO
+**                  opened callback.
+**
+**
+** Returns          BTM_SUCCESS if returned data is valid connection.
+**                  BTM_ILLEGAL_VALUE if no connection for specified sco_inx.
+**                  BTM_MODE_UNSUPPORTED if local controller does not support
+**                      1.2 specification.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadEScoLinkParms (UINT16 sco_inx,
+                                                      tBTM_ESCO_DATA *p_parms);
+
+/*******************************************************************************
+**
+** Function         BTM_ChangeEScoLinkParms
+**
+** Description      This function requests renegotiation of the parameters on
+**                  the current eSCO Link.  If any of the changes are accepted
+**                  by the controllers, the BTM_ESCO_CHG_EVT event is sent in
+**                  the tBTM_ESCO_CBACK function with the current settings of
+**                  the link. The callback is registered through the call to
+**                  BTM_SetEScoMode.
+**
+**
+** Returns          BTM_CMD_STARTED if command is successfully initiated.
+**                  BTM_ILLEGAL_VALUE if no connection for specified sco_inx.
+**                  BTM_NO_RESOURCES - not enough resources to initiate command.
+**                  BTM_MODE_UNSUPPORTED if local controller does not support
+**                      1.2 specification.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ChangeEScoLinkParms (UINT16 sco_inx,
+                                                        tBTM_CHG_ESCO_PARAMS *p_parms);
+
+/*******************************************************************************
+**
+** Function         BTM_EScoConnRsp
+**
+** Description      This function is called upon receipt of an (e)SCO connection
+**                  request event (BTM_ESCO_CONN_REQ_EVT) to accept or reject
+**                  the request. Parameters used to negotiate eSCO links.
+**                  If p_parms is NULL, then values set through BTM_SetEScoMode
+**                  are used.
+**                  If the link type of the incoming request is SCO, then only
+**                  the tx_bw, max_latency, content format, and packet_types are
+**                  valid.  The hci_status parameter should be
+**                  ([0x0] to accept, [0x0d..0x0f] to reject)
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_EScoConnRsp (UINT16 sco_inx, UINT8 hci_status,
+                                         tBTM_ESCO_PARAMS *p_parms);
+
+/*******************************************************************************
+**
+** Function         BTM_GetNumScoLinks
+**
+** Description      This function returns the number of active SCO links.
+**
+** Returns          UINT8
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_GetNumScoLinks (void);
+
+/*****************************************************************************
+**  SECURITY MANAGEMENT FUNCTIONS
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_SecRegister
+**
+** Description      Application manager calls this function to register for
+**                  security services.  There can be one and only one application
+**                  saving link keys.  BTM allows only first registration.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecRegister (tBTM_APPL_INFO *p_cb_info);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecRegisterLinkKeyNotificationCallback
+**
+** Description      Profiles can register to be notified when a new Link Key
+**                  is generated per connection.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecRegisterLinkKeyNotificationCallback (tBTM_LINK_KEY_CALLBACK *p_callback);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddRmtNameNotifyCallback
+**
+** Description      Profiles can register to be notified when name of the
+**                  remote device is resolved (up to BTM_SEC_MAX_RMT_NAME_CALLBACKS).
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecAddRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecDeleteRmtNameNotifyCallback
+**
+** Description      A profile can deregister notification when a new Link Key
+**                  is generated per connection.
+**
+** Returns          TRUE if OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecDeleteRmtNameNotifyCallback (tBTM_RMT_NAME_CALLBACK *p_callback);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecSetConnectFilterCallback
+**
+** Description      Host can register to be asked whenever an HCI connection
+**                  request is received.  In the registered function host
+**                  suppose to check connectibility filters.  Yes/No result
+**                  should be returned synchronously.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SecSetConnectFilterCallback (tBTM_FILTER_CB *p_callback);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetSecurityMode
+**
+** Description      Get security mode for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_GetSecurityMode (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetSecurityFlags
+**
+** Description      Get security flags for the device
+**
+** Returns          BOOLEAN TRUE or FALSE is device found
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_GetSecurityFlags (BD_ADDR bd_addr, UINT8 * p_sec_flags);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadTrustedMask
+**
+** Description      Get trusted mask for the device
+**
+** Returns          NULL, if the device record is not found.
+**                  otherwise, the trusted mask
+**
+*******************************************************************************/
+    BTM_API extern UINT32 * BTM_ReadTrustedMask (BD_ADDR bd_addr);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetSecurityMode
+**
+** Description      Set security mode for the device
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetSecurityMode (UINT8 sec_mode);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPinType
+**
+** Description      Set PIN type for the device.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetPinType (UINT8 pin_type, PIN_CODE pin_code, UINT8 pin_code_len);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPairableMode
+**
+** Description      Enable or disable pairing
+**
+** Parameters       allow_pairing - (TRUE or FALSE) whether or not the device
+**                      allows pairing.
+**                  connect_only_paired - (TRUE or FALSE) whether or not to
+**                      only allow paired devices to connect.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetPairableMode (BOOLEAN allow_pairing, BOOLEAN connect_only_paired);
+
+/*******************************************************************************
+**
+** Function         BTM_SetSecurityLevel
+**
+** Description      Register service security level with Security Manager.  Each
+**                  service must register its requirements regardless of the
+**                  security level that is used.  This API is called once for originators
+**                  nad again for acceptors of connections.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SetSecurityLevel (BOOLEAN is_originator, char *p_name,
+                                                 UINT8 service_id, UINT16 sec_level,
+                                                 UINT16 psm, UINT32 mx_proto_id,
+                                                 UINT32 mx_chan_id);
+
+/*******************************************************************************
+**
+** Function         BTM_SetUCDSecurityLevel
+**
+** Description      Register UCD service security level with Security Manager.  Each
+**                  service must register its requirements regardless of the
+**                  security level that is used.  This API is called once for originators
+**                  and again for acceptors of connections.
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SetUCDSecurityLevel (BOOLEAN is_originator, char *p_name, UINT8 service_id,
+                                                    UINT16 sec_level, UINT16 psm, UINT32 mx_proto_id,
+                                                    UINT32 mx_chan_id);
+
+/*******************************************************************************
+**
+** Function         BTM_SetOutService
+**
+** Description      This function is called to set the service for
+**                  outgoing connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetOutService(BD_ADDR bd_addr, UINT8 service_id, UINT32 mx_chan_id);
+
+/*******************************************************************************
+**
+** Function         BTM_SecClrService
+**
+** Description      Removes specified service record(s) from the security database.
+**                  All service records with the specified name are removed.
+**                  Typically used only by devices with limited RAM so that it can
+**                  reuse an old security service record.
+**                          records (except SDP).
+**
+** Returns          Number of records that were freed.
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_SecClrService (UINT8 service_id);
+
+/*******************************************************************************
+**
+** Function         BTM_SecClrUCDService
+**
+** Description
+**
+** Parameters       Service ID - Id of the service to remove. ('0' removes all service
+**                          records.
+**
+** Returns          Number of records that were freed.
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_SecClrUCDService (UINT8 service_id);
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddDevice
+**
+** Description      Add/modify device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  stored in the NVRAM.
+**                  dev_class, bd_name, link_key, and features are NULL if unknown
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecAddDevice (BD_ADDR bd_addr, DEV_CLASS dev_class,
+                                             BD_NAME bd_name, BD_FEATURES features,
+                                             UINT32 trusted_mask[], LINK_KEY link_key,
+                                             UINT8 key_type, tBTM_IO_CAP io_cap);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecDeleteDevice
+**
+** Description      Free resources associated with the device.
+**
+** Returns          TRUE if rmoved OK, FALSE if not found
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_SecDeleteDevice (BD_ADDR bd_addr);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecUseMasterLinkKey
+**
+** Description      This function is called to tell master of the piconet to
+**                  switch to master link key
+**
+** Returns          BTM_SUCCESS if command is successully initiated
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SecUseMasterLinkKey (BOOLEAN use_master_key);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetMasterKeyCompCback
+**
+** Description      This function is called to register for the master key complete
+**                  status event.
+**
+** Parameters:      mkey_cback - callback registered with the security manager
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SetMasterKeyCompCback(tBTM_MKEY_CALLBACK *mkey_cback );
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecGetDeviceLinkKey
+**
+** Description      This function is called to obtain link key for the device
+**                  it returns BTM_SUCCESS if link key is available, or
+**                  BTM_UNKNOWN_ADDR if Security Manager does not know about
+**                  the device or device record does not contain link key info
+**
+** Returns          BTM_SUCCESS if successful, otherwise error code
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SecGetDeviceLinkKey (BD_ADDR bd_addr,
+                                                        LINK_KEY link_key);
+
+
+/*******************************************************************************
+**
+** Function         BTM_PINCodeReply
+**
+** Description      This function is called after Security Manager submitted
+**                  PIN code request to the UI.
+**
+** Parameters:      bd_addr      - Address of the device for which PIN was requested
+**                  res          - result of the operation BTM_SUCCESS if success
+**                  pin_len      - length in bytes of the PIN Code
+**                  p_pin        - pointer to array with the PIN Code
+**                  trusted_mask - bitwise OR of trusted services (array of UINT32)
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_PINCodeReply (BD_ADDR bd_addr, UINT8 res, UINT8 pin_len,
+                                          UINT8 *p_pin, UINT32 trusted_mask[]);
+
+
+/*******************************************************************************
+**
+** Function         BTM_DeviceAuthorized
+**
+** Description      This function is called after Security Manager submitted
+**                  authorization request to the UI.
+**
+** Parameters:      bd_addr     - Address of the device for which PIN was requested
+**                  res         - result of the operation BTM_SUCCESS if success
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_DeviceAuthorized (BD_ADDR bd_addr, UINT8 res,
+                                              UINT32 trusted_mask[]);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SecBond
+**
+** Description      This function is called to perform bonding with peer device.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SecBond (BD_ADDR bd_addr, UINT8 pin_len, UINT8 *p_pin, UINT32 trusted_mask[]);
+
+/*******************************************************************************
+**
+** Function         BTM_SecBondCancel
+**
+** Description      This function is called to cancel ongoing bonding process
+**                  with peer device.
+**
+** Returns          BTM_CMD_STARTED if successfully initiated, otherwise error
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SecBondCancel (BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTM_SetEncryption
+**
+** Description      This function is called to ensure that connection is
+**                  encrypted.  Should be called only on an open connection.
+**                  Typically only needed for connections that first want to
+**                  bring up unencrypted links, then later encrypt them.
+**
+** Parameters:      bd_addr       - Address of the peer device
+**                  p_callback    - Pointer to callback function called if
+**                                  this function returns PENDING after required
+**                                  procedures are completed.  Can be set to NULL
+**                                  if status is not desired.
+**                  p_ref_data    - pointer to any data the caller wishes to receive
+**                                  in the callback function upon completion.
+*                                   can be set to NULL if not used.
+**
+** Returns          BTM_SUCCESS   - already encrypted
+**                  BTM_PENDING   - command will be returned in the callback
+**                  BTM_WRONG_MODE- connection not up.
+**                  BTM_BUSY      - security procedures are currently active
+**                  BTM_MODE_UNSUPPORTED - if security manager not linked in.
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetEncryption (BD_ADDR bd_addr, tBTM_SEC_CBACK *p_callback,
+                                                  void *p_ref_data);
+
+/*******************************************************************************
+**
+** Function         BTM_ConfirmReqReply
+**
+** Description      This function is called to confirm the numeric value for
+**                  Simple Pairing in response to BTM_SP_CFM_REQ_EVT
+**
+** Parameters:      res           - result of the operation BTM_SUCCESS if success
+**                  bd_addr       - Address of the peer device
+**
+*******************************************************************************/
+    BTM_API extern void BTM_ConfirmReqReply(tBTM_STATUS res, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         BTM_PasskeyReqReply
+**
+** Description      This function is called to provide the passkey for
+**                  Simple Pairing in response to BTM_SP_KEY_REQ_EVT
+**
+** Parameters:      res           - result of the operation BTM_SUCCESS if success
+**                  bd_addr       - Address of the peer device
+**                  passkey       - numeric value in the range of 0 - 999999(0xF423F).
+**
+*******************************************************************************/
+    BTM_API extern void BTM_PasskeyReqReply(tBTM_STATUS res, BD_ADDR bd_addr, UINT32 passkey);
+
+/*******************************************************************************
+**
+** Function         BTM_SendKeypressNotif
+**
+** Description      This function is used during the passkey entry model
+**                  by a device with KeyboardOnly IO capabilities
+**                  (very likely to be a HID Device).
+**                  It is called by a HID Device to inform the remote device when
+**                  a key has been entered or erased.
+**
+** Parameters:      bd_addr - Address of the peer device
+**                  type - notification type
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SendKeypressNotif(BD_ADDR bd_addr, tBTM_SP_KEY_TYPE type);
+
+/*******************************************************************************
+**
+** Function         BTM_IoCapRsp
+**
+** Description      This function is called in response to BTM_SP_IO_REQ_EVT
+**                  When the event data io_req.oob_data is set to BTM_OOB_UNKNOWN
+**                  by the tBTM_SP_CALLBACK implementation, this function is
+**                  called to provide the actual response
+**
+** Parameters:      bd_addr - Address of the peer device
+**                  io_cap  - The IO capability of local device.
+**                  oob     - BTM_OOB_NONE or BTM_OOB_PRESENT.
+**                  auth_req- MITM protection required or not.
+**
+*******************************************************************************/
+    BTM_API extern void BTM_IoCapRsp(BD_ADDR bd_addr, tBTM_IO_CAP io_cap,
+                                     tBTM_OOB_DATA oob, tBTM_AUTH_REQ auth_req);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadLocalOobData
+**
+** Description      This function is called to read the local OOB data from
+**                  LM
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadLocalOobData(void);
+
+/*******************************************************************************
+**
+** Function         BTM_RemoteOobDataReply
+**
+** Description      This function is called to provide the remote OOB data for
+**                  Simple Pairing in response to BTM_SP_RMT_OOB_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  c           - simple pairing Hash C.
+**                  r           - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+    BTM_API extern void BTM_RemoteOobDataReply(tBTM_STATUS res, BD_ADDR bd_addr, BT_OCTET16 c, BT_OCTET16 r);
+
+/*******************************************************************************
+**
+** Function         BTM_BuildOobData
+**
+** Description      This function is called to build the OOB data payload to
+**                  be sent over OOB (non-Bluetooth) link
+**
+** Parameters:      p_data  - the location for OOB data
+**                  max_len - p_data size.
+**                  c       - simple pairing Hash C.
+**                  r       - simple pairing Randomizer  C.
+**                  name_len- 0, local device name would not be included.
+**                            otherwise, the local device name is included for
+**                            up to this specified length
+**
+** Returns          Number of bytes in p_data.
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_BuildOobData(UINT8 *p_data, UINT16 max_len, BT_OCTET16 c,
+                                           BT_OCTET16 r, UINT8 name_len);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadOobData
+**
+** Description      This function is called to parse the OOB data payload
+**                  received over OOB (non-Bluetooth) link
+**
+** Parameters:      p_data  - the location for OOB data
+**                  eir_tag - The associated EIR tag to read the data.
+**                  *p_len(output) - the length of the data with the given tag.
+**
+** Returns          the beginning of the data with the given tag.
+**                  NULL, if the tag is not found.
+**
+*******************************************************************************/
+    BTM_API extern UINT8 * BTM_ReadOobData(UINT8 *p_data, UINT8 eir_tag, UINT8 *p_len);
+
+/*******************************************************************************
+**
+** Function         BTM_SecReadDevName
+**
+** Description      Looks for the device name in the security database for the
+**                  specified BD address.
+**
+** Returns          Pointer to the name or NULL
+**
+*******************************************************************************/
+    BTM_API extern char *BTM_SecReadDevName (BD_ADDR bd_addr);
+
+
+/*****************************************************************************
+**  POWER MANAGEMENT FUNCTIONS
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_PmRegister
+**
+** Description      register or deregister with power manager
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_NO_RESOURCES if no room to hold registration
+**                  BTM_ILLEGAL_VALUE
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_PmRegister (UINT8 mask, UINT8 *p_pm_id,
+                                               tBTM_PM_STATUS_CBACK *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_SetPowerMode
+**
+** Description      store the mode in control block or
+**                  alter ACL connection behavior.
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetPowerMode (UINT8 pm_id, BD_ADDR remote_bda,
+                                                 tBTM_PM_PWR_MD *p_mode);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadPowerMode
+**
+** Description      This returns the current mode for a specific
+**                  ACL connection.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**
+** Output Param     p_mode - address where the current mode is copied into.
+**                          BTM_ACL_MODE_NORMAL
+**                          BTM_ACL_MODE_HOLD
+**                          BTM_ACL_MODE_SNIFF
+**                          BTM_ACL_MODE_PARK
+**                          (valid only if return code is BTM_SUCCESS)
+**
+** Returns          BTM_SUCCESS if successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadPowerMode (BD_ADDR remote_bda,
+                                                  tBTM_PM_MODE *p_mode);
+
+/*******************************************************************************
+**
+** Function         BTM_SetSsrParams
+**
+** Description      This sends the given SSR parameters for the given ACL
+**                  connection if it is in ACTIVE mode.
+**
+** Input Param      remote_bda - device address of desired ACL connection
+**                  max_lat    - maximum latency (in 0.625ms)(0-0xFFFE)
+**                  min_rmt_to - minimum remote timeout
+**                  min_loc_to - minimum local timeout
+**
+**
+** Returns          BTM_SUCCESS if the HCI command is issued successful,
+**                  BTM_UNKNOWN_ADDR if bd addr is not active or bad
+**                  BTM_CMD_STORED if the command is stored
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SetSsrParams (BD_ADDR remote_bda, UINT16 max_lat,
+                                                 UINT16 min_rmt_to, UINT16 min_loc_to);
+
+/*******************************************************************************
+**
+** Function         BTM_IsPowerManagerOn
+**
+** Description      This function is called to check if power manager is included.
+**                  in the BTE version.
+**
+** Returns          TRUE if power manager is compiled in, otherwise FALSE.
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_IsPowerManagerOn (void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetHCIConnHandle
+**
+** Description      This function is called to get the handle for an ACL connection
+**                  to a specific remote BD Address.
+**
+** Returns          the handle of the connection, or 0xFFFF if none.
+**
+*******************************************************************************/
+    BTM_API extern UINT16 BTM_GetHCIConnHandle (BD_ADDR remote_bda);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ReadStoredLinkKey
+**
+** Description      This function is called to obtain link key for the specified
+**                  device from the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      bd_addr      - Address of the device
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ReadStoredLinkKey (BD_ADDR bd_addr,  tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_WriteStoredLinkKey
+**
+** Description      This function is called to write link keys for the specified
+**                  device addresses to the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      num_keys     - Number of link keys
+**                  bd_addr      - Addresses of the devices
+**                  link_key     - Link Keys to be stored
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_WriteStoredLinkKey (UINT8 num_keys,
+                                                       BD_ADDR *bd_addr,
+                                                       LINK_KEY *link_key,
+                                                       tBTM_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_DeleteStoredLinkKey
+**
+** Description      This function is called to delete link key for the specified
+**                  device addresses from the NVRAM storage attached to the Bluetooth
+**                  controller.
+**
+** Parameters:      bd_addr      - Addresses of the devices
+**                  p_cb         - Call back function to be called to return
+**                                 the results
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_DeleteStoredLinkKey(BD_ADDR bd_addr, tBTM_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         BTM_WriteEIR
+**
+** Description      This function is called to write EIR data to controller.
+**
+** Parameters       p_buff - allocated HCI command buffer including extended
+**                           inquriry response
+**
+** Returns          BTM_SUCCESS  - if successful
+**                  BTM_MODE_UNSUPPORTED - if local device cannot support it
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_WriteEIR( BT_HDR * p_buff );
+
+/*******************************************************************************
+**
+** Function         BTM_CheckEirData
+**
+** Description      This function is called to get EIR data from significant part.
+**
+** Parameters       p_eir - pointer of EIR significant part
+**                  type   - finding EIR data type
+**                  p_length - return the length of EIR data
+**
+** Returns          pointer of EIR data
+**
+*******************************************************************************/
+    BTM_API extern UINT8 *BTM_CheckEirData( UINT8 *p_eir, UINT8 type, UINT8 *p_length );
+
+/*******************************************************************************
+**
+** Function         BTM_HasEirService
+**
+** Description      This function is called to know if UUID in bit map of UUID.
+**
+** Parameters       p_eir_uuid - bit map of UUID list
+**                  uuid16 - UUID 16-bit
+**
+** Returns          TRUE - if found
+**                  FALSE - if not found
+**
+*******************************************************************************/
+    BTM_API extern BOOLEAN BTM_HasEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+
+/*******************************************************************************
+**
+** Function         BTM_HasInquiryEirService
+**
+** Description      This function is called to know if UUID in bit map of UUID list.
+**
+** Parameters       p_results - inquiry results
+**                  uuid16 - UUID 16-bit
+**
+** Returns          BTM_EIR_FOUND - if found
+**                  BTM_EIR_NOT_FOUND - if not found and it is complete list
+**                  BTM_EIR_UNKNOWN - if not found and it is not complete list
+**
+*******************************************************************************/
+    BTM_API extern tBTM_EIR_SEARCH_RESULT BTM_HasInquiryEirService( tBTM_INQ_RESULTS *p_results,
+                                                                    UINT16 uuid16 );
+
+/*******************************************************************************
+**
+** Function         BTM_AddEirService
+**
+** Description      This function is called to add a service in bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  uuid16 - UUID 16-bit
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTM_API extern void BTM_AddEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+
+/*******************************************************************************
+**
+** Function         BTM_RemoveEirService
+**
+** Description      This function is called to remove a service in bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  uuid16 - UUID 16-bit
+**
+** Returns          None
+**
+*******************************************************************************/
+    BTM_API extern void BTM_RemoveEirService( UINT32 *p_eir_uuid, UINT16 uuid16 );
+
+/*******************************************************************************
+**
+** Function         BTM_GetEirSupportedServices
+**
+** Description      This function is called to get UUID list from bit map of UUID list.
+**
+** Parameters       p_eir_uuid - bit mask of UUID list for EIR
+**                  p - reference of current pointer of EIR
+**                  max_num_uuid16 - max number of UUID can be written in EIR
+**                  num_uuid16 - number of UUID have been written in EIR
+**
+** Returns          BTM_EIR_MORE_16BITS_UUID_TYPE, if it has more than max
+**                  BTM_EIR_COMPLETE_16BITS_UUID_TYPE, otherwise
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_GetEirSupportedServices( UINT32 *p_eir_uuid,    UINT8 **p,
+                                                      UINT8  max_num_uuid16, UINT8 *p_num_uuid16);
+
+/*******************************************************************************
+**
+** Function         BTM_GetEirUuidList
+**
+** Description      This function parses EIR and returns UUID list.
+**
+** Parameters       p_eir - EIR
+**                  uuid_size - LEN_UUID_16, LEN_UUID_32, LEN_UUID_128
+**                  p_num_uuid - return number of UUID in found list
+**                  p_uuid_list - return UUID 16-bit list
+**                  max_num_uuid - maximum number of UUID to be returned
+**
+** Returns          0 - if not found
+**                  BTM_EIR_COMPLETE_16BITS_UUID_TYPE
+**                  BTM_EIR_MORE_16BITS_UUID_TYPE
+**                  BTM_EIR_COMPLETE_32BITS_UUID_TYPE
+**                  BTM_EIR_MORE_32BITS_UUID_TYPE
+**                  BTM_EIR_COMPLETE_128BITS_UUID_TYPE
+**                  BTM_EIR_MORE_128BITS_UUID_TYPE
+**
+*******************************************************************************/
+    BTM_API extern UINT8 BTM_GetEirUuidList( UINT8 *p_eir, UINT8 uuid_size, UINT8 *p_num_uuid,
+                                             UINT8 *p_uuid_list, UINT8 max_num_uuid);
+
+/*******************************************************************************
+**
+** Function         BTM_SyncStack
+**
+** Description      For Dual-Stack support. Called to initiate switching to/from
+**                  main stack (running on phone baseband) to mm stack (light
+**                  stack running on multi-media chip)
+**
+** Parameters       sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack
+**                            BTM_SW_MM_TO_BB: switch from MM to BB stack
+**                            BTM_SW_RESYNC: resync MM and BB stacks
+**
+**                  p_sync_cback: callback function for event notification
+** Returns
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_SyncStack(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_SyncBtaRsp
+**
+** Description      For Dual-Stack support. Called to indicate that upper layers
+**                  (e.g. BTA or application) have completed synchronizing bta/app
+**                  specific layers for switching.
+**
+**                  Called in response to 'BTM_SYNC_BTA_EVT'
+**
+** Parameters       status: BTM_SUCESS: bta/app successfully synchronized
+**                          otherwise:  sync was unsuccessfule. Abort switch.
+**
+**                  p_btm_sync_info: information from bta/app that will be needed
+**                                  by BTE (avdt and l2cap) for switching.
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_SyncBtaRsp(tBTM_STATUS status, tBTM_SYNC_INFO *p_btm_sync_info);
+
+/*******************************************************************************
+**
+** Function         BTM_OpenUIPC
+**
+** Description      For Dual-Stack support. Called to open UIPC between
+**                  main stack (running on phone baseband) to embedded light stack
+**                  (running on Multimedia or Bluetooth Controller chip)
+**
+** Parameters       sync_dir: BTM_SW_BB_TO_MM: switch from BB to MM stack
+**                            BTM_SW_BB_TO_BTC:switch from BB to BTC stack
+**
+**                  p_sync_callback: callback function for event notification
+** Returns
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_OpenUIPC(tBTM_SW_DIR sync_dir, tBTM_SYNC_STACK_CBACK p_sync_callback);
+
+/*******************************************************************************
+**
+** Function         BTM_CloseUIPC
+**
+** Description      For Dual-Stack support. Called to close UIPC between
+**                  main stack (running on phone baseband) to embedded light stack
+**                  (running on Multimedia or Bluetooth Controller chip)
+**
+** Parameters
+**                  p_sync_callback: callback function for event notification
+** Returns
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_CloseUIPC(tBTM_SYNC_STACK_CBACK p_sync_callback);
+
+/*******************************************************************************
+**
+** Function         BTM_IpcSend
+**
+** Description      For Dual-Stack support. Called to send ipc messages from
+**                  full stack to lite stack and vice-versa. This API is
+**                  typically called by bta layers e.g. bta_av.
+**
+**
+** Parameters       len:    Length of the buffer in the ipc message
+**
+**                  buffer: Pointer to the buffer to be passed in the IPC message
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_IpcSend(UINT16 len, UINT8* buffer);
+
+/*******************************************************************************
+**
+** Function         BTM_IpcSendBuf
+**
+** Description      For Dual-Stack support. Called to send ipc messages from
+**                  full stack to lite stack and vice-versa. This API is
+**                  typically called by bta layers e.g. bta_av_sync.
+**
+**
+** Parameters       p_buf: Pointer to the buffer to be passed in the IPC message
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_IpcSendBuf(BT_HDR* p_buf);
+
+/*******************************************************************************
+**
+** Function         BTM_RegIpcEvtHandler
+**
+** Description      registers the DM provided handler for IPC events
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_RegIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_RegRTIpcEvtHandler
+**
+** Description      registers the RT(Audio Routing) provided handler for IPC events
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_RegRTIpcEvtHandler(tBTM_IPC_EVT_CBACK *p_cback);
+
+/*****************************************************************************
+**  N2BT
+*****************************************************************************/
+
+/* Data callback for N2BT */
+    typedef void (tBTM_N2BT_DATA_CB) (BD_ADDR bd_addr, UINT16 handle, UINT8 *p_data, UINT16 datalen);
+
+/*******************************************************************************
+**
+** Function         BTM_N2BtAcquire
+**
+** Description      Put controller into acquisition mode
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_N2BtAcquire(BD_ADDR bd_addr, UINT16 timeout,
+                                        UINT8 freq, UINT8 src_addrlen, UINT8 sensor_flags,
+                                        UINT8 sensor_type, UINT8 sensor_clk_accuracy,
+                                        UINT16 add_rx_window, UINT16 init_crc,
+                                        UINT32 ac_low, UINT32 ac_high, UINT16 pkt_hdr,
+                                        UINT16 list_dur, UINT16 list_int,
+                                        UINT8 oor_missed_pkts, tBTM_VSC_CMPL_CB *p_cb,
+                                        tBTM_N2BT_DATA_CB *p_data_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_N2BtDisconnect
+**
+** Description      Disconnects all N2BT devices
+**
+** Returns          void
+**
+*******************************************************************************/
+    BTM_API extern void BTM_N2BtDisconnect(void);
+
+
+/*******************************************************************************
+**
+** Function         BTM_ConfigI2SPCM
+**
+** Description      This function sends VSC Write_I2SPCM_Interface_Param
+**                  as to the specified codec_type.
+**
+**
+** Parameter        codec_type: codec_type to be used for sco connection.
+**                  role: master or slave role
+**                  sample_rate: sampling rate
+**                  clock_rate:clock rate 128K to 2048K
+**
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_ILLEGAL_VALUE: wrong codec type
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ConfigI2SPCM (tBTM_SCO_CODEC_TYPE codec_type, UINT8 role, UINT8 sample_rate, UINT8 clock_rate);
+
+/*****************************************************************************
+**  SCO OVER HCI
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         BTM_ConfigScoPath
+**
+** Description      This function enable/disable SCO over HCI and registers SCO
+**                  data callback if SCO over HCI is enabled.
+**
+** Parameter        path: SCO or HCI
+**                  p_sco_data_cb: callback function or SCO data if path is set
+**                                 to transport.
+**                  p_pcm_param: pointer to the PCM interface parameter. If a NULL
+**                               pointer is used, PCM parameter maintained in
+**                               the control block will be used; otherwise update
+**                               control block value.
+**                  err_data_rpt: Lisbon feature to enable the erronous data report
+**                                or not.
+**
+** Returns          BTM_SUCCESS if the successful.
+**                  BTM_NO_RESOURCES: no rsource to start the command.
+**                  BTM_ILLEGAL_VALUE: invalid callback function pointer.
+**                  BTM_CMD_STARTED :Command sent. Waiting for command cmpl event.
+**
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_ConfigScoPath (tBTM_SCO_ROUTE_TYPE path,
+                                                  tBTM_SCO_DATA_CB *p_sco_data_cb,
+                                                  tBTM_SCO_PCM_PARAM *p_pcm_param,
+                                                  BOOLEAN err_data_rpt);
+
+/*******************************************************************************
+**
+** Function         BTM_WriteScoData
+**
+** Description      This function write SCO data to a specified instance. The data
+**                  to be written p_buf needs to carry an offset of
+**                  HCI_SCO_PREAMBLE_SIZE bytes, and the data length can not
+**                  exceed BTM_SCO_DATA_SIZE_MAX bytes, whose default value is set
+**                  to 60 and is configurable. Data longer than the maximum bytes
+**                  will be truncated.
+**
+** Returns          BTM_SUCCESS: data write is successful
+**                  BTM_ILLEGAL_VALUE: SCO data contains illegal offset value.
+**                  BTM_SCO_BAD_LENGTH: SCO data length exceeds the max SCO packet
+**                                      size.
+**                  BTM_NO_RESOURCES: no resources.
+**                  BTM_UNKNOWN_ADDR: unknown SCO connection handle, or SCO is not
+**                                    routed via HCI.
+**
+**
+*******************************************************************************/
+    BTM_API extern tBTM_STATUS BTM_WriteScoData (UINT16 sco_inx, BT_HDR *p_buf);
+
+/*******************************************************************************
+**
+** Function         BTM_SetARCMode
+**
+** Description      Send Audio Routing Control command.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_SetARCMode (UINT8 iface, UINT8 arc_mode, tBTM_VSC_CMPL_CB *p_arc_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_PCM2Setup_Write
+**
+** Description      Send PCM2_Setup write command.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_PCM2Setup_Write (BOOLEAN clk_master, tBTM_VSC_CMPL_CB *p_arc_cb);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* BTM_API_H */
diff --git a/stack/include/btm_ble_api.h b/stack/include/btm_ble_api.h
new file mode 100644
index 0000000..8456b9f
--- /dev/null
+++ b/stack/include/btm_ble_api.h
@@ -0,0 +1,729 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the Bluetooth Manager (BTM) API function external
+ *  definitions.
+ *
+ ******************************************************************************/
+#ifndef BTM_BLE_API_H
+#define BTM_BLE_API_H
+
+#include "btm_api.h"
+
+#define CHNL_MAP_LEN    5
+typedef UINT8 tBTM_BLE_CHNL_MAP[CHNL_MAP_LEN];
+
+#define BTM_BLE_SCAN_MODE_PASS      0
+#define BTM_BLE_SCAN_MODE_ACTI      1
+#define BTM_BLE_SCAN_MODE_NONE      0xff
+typedef UINT8 tBTM_BLE_SCAN_MODE;
+
+/* advertising channel map */
+#define BTM_BLE_ADV_CHNL_37    (0x01 << 0)
+#define BTM_BLE_ADV_CHNL_38    (0x01 << 1)
+#define BTM_BLE_ADV_CHNL_39    (0x01 << 2)
+typedef UINT8 tBTM_BLE_ADV_CHNL_MAP;
+
+/*d efault advertising channel map */
+#ifndef BTM_BLE_DEFAULT_ADV_CHNL_MAP
+#define BTM_BLE_DEFAULT_ADV_CHNL_MAP   (BTM_BLE_ADV_CHNL_37| BTM_BLE_ADV_CHNL_38| BTM_BLE_ADV_CHNL_39)
+#endif
+
+/* advertising filter policy */
+#define AP_SCAN_CONN_ALL           0x00        /* default */
+#define AP_SCAN_WL_CONN_ALL        0x01
+#define AP_SCAN_ALL_CONN_WL        0x02
+#define AP_SCAN_CONN_WL            0x03
+#define AP_SCAN_CONN_POLICY_MAX    0x04
+typedef UINT8   tBTM_BLE_AFP;
+
+/* default advertising filter policy */
+#ifndef BTM_BLE_DEFAULT_AFP
+#define BTM_BLE_DEFAULT_AFP   AP_SCAN_CONN_ALL
+#endif
+
+/* scanning filter policy */
+#define SP_ADV_ALL     0x00     /* accept adv pakt from all, directed adv pkt not directed to me is ignored */
+#define SP_ADV_WL      0x01     /* accept adv pakt from device in white list, directed adv pkt not directed to me is ignored */
+typedef UINT8   tBTM_BLE_SFP;
+
+#ifndef BTM_BLE_DEFAULT_SFP
+#define BTM_BLE_DEFAULT_SFP   SP_ADV_ALL
+#endif
+
+/* adv parameter boundary values */
+#define BTM_BLE_ADV_INT_MIN            0x0020
+#define BTM_BLE_ADV_INT_MAX            0x4000
+
+/* connection parameter boundary value */
+#define BTM_BLE_SCAN_INT_MIN            0x0004
+#define BTM_BLE_SCAN_INT_MAX            0x4000
+#define BTM_BLE_SCAN_WIN_MIN            0x0004
+#define BTM_BLE_SCAN_WIN_MAX            0x4000
+#define BTM_BLE_CONN_INT_MIN            0x0006
+#define BTM_BLE_CONN_INT_MAX            0x0C80
+#define BTM_BLE_CONN_LATENCY_MAX        500
+#define BTM_BLE_CONN_SUP_TOUT_MIN       0x000A
+#define BTM_BLE_CONN_SUP_TOUT_MAX       0x0C80
+#define BTM_BLE_CONN_PARAM_UNDEF        0xffff      /* use this value when a specific value not to be overwritten */
+
+/* default connection parameters if not configured, use GAP recommend value for auto/selective connection */
+/* default scan interval */
+#ifndef BTM_BLE_CONN_EST_SCAN_INT
+#define BTM_BLE_CONN_EST_SCAN_INT    96    /* 312.5 ms   = 500 *0.625 */
+#endif
+/* default scan window for background connection, applicable for auto connection or selective conenction */
+#ifndef BTM_BLE_CONN_EST_SCAN_WIND
+#define BTM_BLE_CONN_EST_SCAN_WIND   48      /* 187.5 ms = 400 *0.625 */
+#endif
+
+/* default scan paramter used in reduced power cycle */
+#ifndef BTM_BLE_CONN_EST_SCAN_INT_LO
+#define BTM_BLE_CONN_EST_SCAN_INT_LO    2048    /* 1.28 s   = 500 *0.625 */
+#endif
+#ifndef BTM_BLE_CONN_EST_SCAN_WIND_LO
+#define BTM_BLE_CONN_EST_SCAN_WIND_LO   18      /* 11.25 ms = 400 *0.625 */
+#endif
+
+/* default connection interval min */
+#ifndef BTM_BLE_CONN_INT_MIN_DEF
+#define BTM_BLE_CONN_INT_MIN_DEF     40      /* 50ms = 400 * 1.25 */
+#endif
+/* default connectino interval max */
+#ifndef BTM_BLE_CONN_INT_MAX_DEF
+#define BTM_BLE_CONN_INT_MAX_DEF     56      /* 70ms = 56 * 1.25 */
+#endif
+/* default slave latency */
+#ifndef BTM_BLE_CONN_SLAVE_LATENCY_DEF
+#define BTM_BLE_CONN_SLAVE_LATENCY_DEF  0      /* 0 */
+#endif
+/* default supervision timeout */
+#ifndef BTM_BLE_CONN_TIMEOUT_DEF
+#define BTM_BLE_CONN_TIMEOUT_DEF    2000
+#endif
+
+#define BTM_CMAC_TLEN_SIZE          8                   /* 64 bits */
+#define BTM_BLE_AUTH_SIGN_LEN       12                   /* BLE data signature length 8 Bytes + 4 bytes counter*/
+typedef UINT8 BLE_SIGNATURE[BTM_BLE_AUTH_SIGN_LEN];         /* Device address */
+
+/* Structure returned with Rand/Encrypt complete callback */
+typedef struct
+{
+    UINT8   status;
+    UINT8   param_len;
+    UINT16  opcode;
+    UINT8   param_buf[BT_OCTET16_LEN];
+} tBTM_RAND_ENC;
+
+/* General callback function for notifying an application that a synchronous
+** BTM function is complete. The pointer contains the address of any returned data.
+*/
+typedef void (tBTM_RAND_ENC_CB) (tBTM_RAND_ENC *p1);
+
+#define BTM_BLE_FILTER_TARGET_SCANNER       0x01
+#define BTM_BLE_FILTER_TARGET_ADVR          0x00
+
+#define BTM_BLE_POLICY_BLACK_ALL            0x00    /* relevant to both */
+#define BTM_BLE_POLICY_ALLOW_SCAN           0x01    /* relevant to advertiser */
+#define BTM_BLE_POLICY_ALLOW_CONN           0x02    /* relevant to advertiser */
+#define BTM_BLE_POLICY_WHITE_ALL            0x03    /* relevant to both */
+
+typedef struct
+{
+    UINT8               adv_int_min;
+    UINT8               adv_int_max;
+    tBTM_BLE_CHNL_MAP   chnl_map;
+
+}tBTM_BLE_ADV_PARAMS;
+
+/* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */
+#define BTM_BLE_LIMIT_DISC_FLAG         (0x01 << 0)
+#define BTM_BLE_GEN_DISC_FLAG           (0x01 << 1)
+#define BTM_BLE_BREDR_NOT_SPT           (0x01 << 2)
+#define BTM_BLE_NON_LIMIT_DISC_FLAG     (0x00 )         /* lowest bit unset */
+#define BTM_BLE_ADV_FLAG_MASK           (BTM_BLE_LIMIT_DISC_FLAG | BTM_BLE_BREDR_NOT_SPT | BTM_BLE_GEN_DISC_FLAG)
+#define BTM_BLE_LIMIT_DISC_MASK         (BTM_BLE_LIMIT_DISC_FLAG )
+
+#define BTM_BLE_AD_BIT_DEV_NAME        (0x0001 << 0)
+#define BTM_BLE_AD_BIT_FLAGS           (0x0001 << 1)
+#define BTM_BLE_AD_BIT_MANU            (0x0001 << 2)
+#define BTM_BLE_AD_BIT_TX_PWR          (0x0001 << 3)
+#define BTM_BLE_AD_BIT_ATTR            (0x0001 << 4)
+#define BTM_BLE_AD_BIT_INT_RANGE       (0x0001 << 5)
+#define BTM_BLE_AD_BIT_SERVICE         (0x0001 << 6)
+#define BTM_BLE_AD_BIT_SERVICE_SOL     (0x0001 << 7)
+#define BTM_BLE_AD_BIT_SERVICE_DATA    (0x0001 << 8)
+#define BTM_BLE_AD_BIT_SIGN_DATA       (0x0001 << 9)
+#define BTM_BLE_AD_BIT_PROPRIETARY     (0x0001 << 15)
+
+typedef  UINT16  tBTM_BLE_AD_MASK;
+
+#define BTM_BLE_AD_TYPE_FLAG            0x01
+#define BTM_BLE_AD_TYPE_SRV_PART        0x02
+#define BTM_BLE_AD_TYPE_SRV_CMPL        0x03
+#define BTM_BLE_AD_TYPE_NAME_SHORT      0x08
+#define BTM_BLE_AD_TYPE_NAME_CMPL       0x09
+#define BTM_BLE_AD_TYPE_TX_PWR          0x0A
+#define BTM_BLE_AD_TYPE_DEV_CLASS       0x0D
+#define BTM_BLE_AD_TYPE_ATTR            0x10
+#define BTM_BLE_AD_TYPE_MANU            0xff
+#define BTM_BLE_AD_TYPE_INT_RANGE       0x12
+#define BTM_BLE_AD_TYPE_SOL_SRV_UUID    0x14
+typedef UINT8   tBTM_BLE_AD_TYPE;
+
+/* slave preferred connection interval range */
+typedef struct
+{
+    UINT16  low;
+    UINT16  hi;
+
+}tBTM_BLE_INT_RANGE;
+
+/* Service tag supported in the device */
+typedef struct
+{
+    UINT8       num_service;
+    BOOLEAN     list_cmpl;
+    UINT16      *p_uuid;
+}tBTM_BLE_SERVICE;
+
+/* attribute data */
+typedef struct
+{
+    UINT16       uuid;
+    UINT16       data_len;
+    UINT8       *p_data;
+}tBTM_BLE_ATTR;
+
+#ifndef BTM_BLE_NUM_AD_ATTR_MAX
+#define BTM_BLE_NUM_AD_ATTR_MAX         10
+#endif
+/* attribute list contained in adv data */
+typedef struct
+{
+    UINT8               num_attr;
+    tBTM_BLE_ATTR       attr_list[BTM_BLE_NUM_AD_ATTR_MAX];
+}tBTM_BLE_ATTR_DATA;
+
+typedef struct
+{
+    UINT8       len;
+    UINT8      *p_val;
+}tBTM_BLE_MANU;
+
+typedef struct
+{
+    UINT8       adv_type;
+    UINT8       len;
+    UINT8       *p_val;     /* number of len byte */
+}tBTM_BLE_PROP_ELEM;
+
+typedef struct
+{
+    UINT8                   num_elem;
+    tBTM_BLE_PROP_ELEM      *p_elem;
+}tBTM_BLE_PROPRIETARY;
+
+typedef struct
+{
+    tBTM_BLE_MANU           manu;        /* manufactuer data */
+    tBTM_BLE_INT_RANGE      int_range;      /* slave prefered conn interval range */
+    tBTM_BLE_SERVICE        services;       /* services */
+    tBTM_BLE_ATTR_DATA      attr;           /* attribute data */
+    UINT8                   flag;
+    tBTM_BLE_PROPRIETARY    *p_proprietary;
+}tBTM_BLE_ADV_DATA;
+
+/* These are the fields returned in each device adv packet.  It
+** is returned in the results callback if registered.
+*/
+typedef struct
+{
+    UINT8               conn_mode;
+    tBTM_BLE_AD_MASK    ad_mask;        /* mask of the valid adv data field */
+    UINT8               flag;
+    UINT8               tx_power_level;
+    UINT8               remote_name_len;
+    UINT8               *p_remote_name;
+    tBTM_BLE_ATTR_DATA  attr_data;
+    tBTM_BLE_SERVICE    service;
+} tBTM_BLE_INQ_DATA;
+
+enum
+{
+    BTM_BLE_CONN_NONE,
+    BTM_BLE_CONN_AUTO,
+    BTM_BLE_CONN_SELECTIVE
+};
+typedef UINT8   tBTM_BLE_CONN_TYPE;
+
+typedef BOOLEAN (tBTM_BLE_SEL_CBACK)(BD_ADDR random_bda,     UINT8 *p_remote_name);
+
+/* callback function for SMP signing algorithm, signed data in little endian order with tlen bits long */
+typedef void (tBTM_BLE_SIGN_CBACK)(void *p_ref_data, UINT8 *p_signing_data);
+typedef void (tBTM_BLE_VERIFY_CBACK)(void *p_ref_data, BOOLEAN match);
+/* random address set complete callback */
+typedef void (tBTM_BLE_RANDOM_SET_CBACK) (BD_ADDR random_bda);
+
+typedef void (tBTM_BLE_SCAN_REQ_CBACK)(BD_ADDR remote_bda, tBLE_ADDR_TYPE addr_type, UINT8 adv_evt);
+/*****************************************************************************
+**  EXTERNAL FUNCTION DECLARATIONS
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/*******************************************************************************
+**
+** Function         BTM_SecAddBleDevice
+**
+** Description      Add/modify device.  This function will be normally called
+**                  during host startup to restore all required information
+**                  for a LE device stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  bd_name          - Name of the peer device.  NULL if unknown.
+**                  dev_type         - Remote device's device type.
+**                  addr_type        - LE device address type.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_SecAddBleDevice (BD_ADDR bd_addr, BD_NAME bd_name,
+                                           tBT_DEVICE_TYPE dev_type, tBLE_ADDR_TYPE addr_type);
+
+/*******************************************************************************
+**
+** Function         BTM_SecAddBleKey
+**
+** Description      Add/modify LE device information.  This function will be
+**                  normally called during host startup to restore all required
+**                  information stored in the NVRAM.
+**
+** Parameters:      bd_addr          - BD address of the peer
+**                  p_le_key         - LE key values.
+**                  key_type         - LE SMP key type.
+*
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_SecAddBleKey (BD_ADDR bd_addr, tBTM_LE_KEY_VALUE *p_le_key,
+                                         tBTM_LE_KEY_TYPE key_type);
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetAdvParams
+**
+** Description      This function is called to set advertising parameters.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_BleSetAdvParams(UINT16 adv_int_min, UINT16 adv_int_max,
+                                tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP chnl_map);
+
+/*******************************************************************************
+**
+** Function         BTM_BleWriteAdvData
+**
+** Description      This function is called to write advertising data.
+**
+** Parameters:       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_BleWriteAdvData(tBTM_BLE_AD_MASK  data_mask,
+                                               tBTM_BLE_ADV_DATA *p_data);
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetAdvParams
+**
+** Description      This function is called to set advertising parameters.
+**
+** Parameters       adv_int_min: minimum advertising interval
+**                  adv_int_max: maximum advertising interval
+**                  p_dir_bda: connectable direct initiator's LE device address
+**                  chnl_map: advertising channel map.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_BleReadAdvParams (UINT16 *adv_int_min, UINT16 *adv_int_max,
+                            tBLE_BD_ADDR *p_dir_bda, tBTM_BLE_ADV_CHNL_MAP *p_chnl_map);
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetScanParams
+**
+** Description      This function is called to set Scan parameters.
+**
+** Parameters       adv_int_min: minimum advertising interval
+**                  adv_int_max: maximum advertising interval
+**                  scan_type: scan mode.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_BleSetScanParams(UINT16 scan_interval, UINT16 scan_window,
+                                         tBTM_BLE_SCAN_MODE scan_type);
+
+/*******************************************************************************
+**
+** Function         BTM_BleWriteScanRsp
+**
+** Description      This function is called to write LE scan response.
+**
+** Parameters:      p_scan_rsp: scan response.
+**
+** Returns          status
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_BleWriteScanRsp(tBTM_BLE_AD_MASK data_mask,
+                                               tBTM_BLE_ADV_DATA *p_data);
+
+/*******************************************************************************
+**
+** Function         BTM_BleReset
+**
+** Description      This function is called to reset ULP controller.
+**
+** Parameters       None.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_BleReset(void);
+
+/*******************************************************************************
+**
+** Function         BTM_BleObserve
+**
+** Description      This procedure keep the device listening for advertising
+**                  events from a broadcast device.
+**
+** Parameters       start: start or stop observe.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_BleObserve(BOOLEAN start, UINT8 duration,
+                           tBTM_INQ_RESULTS_CB *p_results_cb, tBTM_CMPL_CB *p_cmpl_cb);
+
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceIDRoot
+**
+** Description      This function is called to read the local device identity
+**                  root.
+**
+** Returns          void
+**                  the local device ER is copied into er
+**
+*******************************************************************************/
+BTM_API extern void BTM_GetDeviceIDRoot (BT_OCTET16 ir);
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceEncRoot
+**
+** Description      This function is called to read the local device encryption
+**                  root.
+**
+** Returns          void
+**                  the local device ER is copied into er
+**
+*******************************************************************************/
+BTM_API extern void BTM_GetDeviceEncRoot (BT_OCTET16 er);
+
+/*******************************************************************************
+**
+** Function         BTM_GetDeviceDHK
+**
+** Description      This function is called to read the local device DHK.
+**
+** Returns          void
+**                  the local device DHK is copied into dhk
+**
+*******************************************************************************/
+BTM_API extern void BTM_GetDeviceDHK (BT_OCTET16 dhk);
+
+/*******************************************************************************
+**
+** Function         BTM_SecurityGrant
+**
+** Description      This function is called to grant security process.
+**
+** Parameters       bd_addr - peer device bd address.
+**                  res     - result of the operation BTM_SUCCESS if success.
+**                            Otherwise, BTM_REPEATED_ATTEMPTS is too many attempts.
+**
+** Returns          None
+**
+*******************************************************************************/
+BTM_API extern void BTM_SecurityGrant(BD_ADDR bd_addr, UINT8 res);
+
+/*******************************************************************************
+**
+** Function         BTM_BlePasskeyReply
+**
+** Description      This function is called after Security Manager submitted
+**                  passkey request to the application.
+**
+** Parameters:      bd_addr      - Address of the device for which passkey was requested
+**                  res          - result of the operation SMP_SUCCESS if success
+**                  passkey - numeric value in the range of
+**                  BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
+**
+*******************************************************************************/
+BTM_API extern void BTM_BlePasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey);
+
+/*******************************************************************************
+**
+** Function         BTM_LeOobDataReply
+**
+** Description      This function is called to provide the OOB data for
+**                  SMP in response to BTM_LE_OOB_REQ_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  res         - result of the operation SMP_SUCCESS if success
+**                  p_data      - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+BTM_API extern void BTM_BleOobDataReply(BD_ADDR bd_addr, UINT8 res, UINT8 len, UINT8 *p_data);
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleDataSignature
+**
+** Description      This function is called to sign the data using AES128 CMAC
+**                  algorith.
+**
+** Parameter        bd_addr: target device the data to be signed for.
+**                  p_text: singing data
+**                  len: length of the signing data
+**                  signature: output parameter where data signature is going to
+**                             be stored.
+**
+** Returns          TRUE if signing sucessul, otherwise FALSE.
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_BleDataSignature (BD_ADDR bd_addr, UINT8 *p_text, UINT16 len,
+                                             BLE_SIGNATURE signature);
+
+/*******************************************************************************
+**
+** Function         BTM_BleVerifySignature
+**
+** Description      This function is called to verify the data signature
+**
+** Parameter        bd_addr: target device the data to be signed for.
+**                  p_orig:  original data before signature.
+**                  len: length of the signing data
+**                  counter: counter used when doing data signing
+**                  p_comp: signature to be compared against.
+
+** Returns          TRUE if signature verified correctly; otherwise FALSE.
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_BleVerifySignature (BD_ADDR bd_addr, UINT8 *p_orig,
+                                            UINT16 len, UINT32 counter,
+                                            UINT8 *p_comp);
+
+/*******************************************************************************
+**
+** Function         BTM_SetRandomAddr
+**
+** Description      This function is called to set the local device random address
+**                  .
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_SetRandomAddr (tBTM_BLE_RANDOM_SET_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadConnectionAddr
+**
+** Description      This function is called to set the local device random address
+**                  .
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_ReadConnectionAddr (BD_ADDR conn_addr);
+
+/*******************************************************************************
+**
+** Function         BTM_BleLoadLocalKeys
+**
+** Description      Local local identity key, encryption root or sign counter.
+**
+** Parameters:      key_type: type of key, can be BTM_BLE_KEY_TYPE_ID, BTM_BLE_KEY_TYPE_ER
+**                            or BTM_BLE_KEY_TYPE_COUNTER.
+**                  p_key: pointer to the key.
+*
+** Returns          non2.
+**
+*******************************************************************************/
+BTM_API extern void BTM_BleLoadLocalKeys(UINT8 key_type, tBTM_BLE_LOCAL_KEYS *p_key);
+
+
+/*******************************************************************************
+**
+** Function         BTM_BleSetBgConnType
+**
+** Description      This function is called to set BLE background connection
+**                  procedure type. It can be auto connection, or selective connection.
+**
+** Parameters       conn_type: it can be auto connection, or selective connection.
+**                  p_select_cback: callback function when selective connection procedure
+**                              is being used.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_BleSetBgConnType(tBTM_BLE_CONN_TYPE   conn_type,
+                                    tBTM_BLE_SEL_CBACK   *p_select_cback);
+
+/*******************************************************************************
+**
+** Function         BTM_BleUpdateBgConnDev
+**
+** Description      This function is called to add or remove a device into/from
+**                  background connection procedure. The background connection
+*                   procedure is decided by the background connection type, it can be
+*                   auto connection, or selective connection.
+**
+** Parameters       add_remove: TRUE to add; FALSE to remove.
+**                  remote_bda: device address to add/remove.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern BOOLEAN BTM_BleUpdateBgConnDev(BOOLEAN add_remove, BD_ADDR   remote_bda);
+
+
+/********************************************************
+**
+** Function         BTM_BleSetPrefConnParams
+**
+** Description      Set a peripheral's preferred connection parameters. When
+**                  any of the value does not want to be updated while others
+**                  do, use BTM_BLE_CONN_PARAM_UNDEF for the ones want to
+**                  leave untouched.
+**
+** Parameters:      bd_addr          - BD address of the peripheral
+**                  min_conn_int     - minimum preferred connection interval
+**                  max_conn_int     - maximum preferred connection interval
+**                  slave_latency    - preferred slave latency
+**                  supervision_tout - preferred supervision timeout
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern  void BTM_BleSetPrefConnParams (BD_ADDR bd_addr,
+                                               UINT16 min_conn_int,  UINT16 max_conn_int,
+                                               UINT16 slave_latency, UINT16 supervision_tout);
+
+/******************************************************************************
+**
+** Function         BTM_BleSetConnScanParams
+**
+** Description      Set scan parameters used in BLE connection request
+**
+** Parameters:      scan_interval    - scan interval
+**                  scan_window      - scan window
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern  void BTM_BleSetConnScanParams (UINT16 scan_interval, UINT16 scan_window);
+
+/*******************************************************************************
+**
+** Function         BTM_CheckAdvData
+**
+** Description      This function is called to get ADV data for a specific type.
+**
+** Parameters       p_adv - pointer of ADV data
+**                  type   - finding ADV data type
+**                  p_length - return the length of ADV data not including type
+**
+** Returns          pointer of ADV data
+**
+*******************************************************************************/
+BTM_API extern  UINT8 *BTM_CheckAdvData( UINT8 *p_adv, UINT8 type, UINT8 *p_length);
+
+/*******************************************************************************
+**
+** Function         BTM_ReadDevInfo
+**
+** Description      This function is called to read the device/address type
+**                  of BD address.
+**
+** Parameter        remote_bda: remote device address
+**                  p_dev_type: output parameter to read the device type.
+**                  p_addr_type: output parameter to read the address type.
+**
+*******************************************************************************/
+BTM_API extern void BTM_ReadDevInfo (BD_ADDR remote_bda, tBT_DEVICE_TYPE *p_dev_type,
+                                     tBLE_ADDR_TYPE *p_addr_type);
+
+/*******************************************************************************
+**
+** Function         BTM_BleBroadcast
+**
+** Description      This function is to start or stop broadcasting.
+**
+** Parameters       start: start or stop broadcasting.
+**
+** Returns          status.
+**
+*******************************************************************************/
+BTM_API extern tBTM_STATUS BTM_BleBroadcast(BOOLEAN start);
+
+/*******************************************************************************
+**
+** Function         BTM_RegisterScanReqEvt
+**
+** Description      This function is called to register a scan request callback
+**                  on the advertiser.
+**
+** Parameters       p_scan_req_cback: scan request callback.  If NULL, remove the
+**                                    registration.
+**
+** Returns          void
+**
+*******************************************************************************/
+BTM_API extern void BTM_RegisterScanReqEvt(tBTM_BLE_SCAN_REQ_CBACK *p_scan_req_cback);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/stack/include/btu.h b/stack/include/btu.h
new file mode 100644
index 0000000..d33f0bb
--- /dev/null
+++ b/stack/include/btu.h
@@ -0,0 +1,310 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the main Bluetooth Upper Layer definitions. The Broadcom
+ *  implementations of L2CAP RFCOMM, SDP and the BTIf run as one GKI task. The
+ *  btu_task switches between them.
+ *
+ ******************************************************************************/
+
+#ifndef BTU_H
+#define BTU_H
+
+#include "bt_target.h"
+#include "gki.h"
+
+/* Define the BTU mailbox usage
+*/
+#define BTU_HCI_RCV_MBOX        TASK_MBOX_0     /* Messages from HCI  */
+#define BTU_BTIF_MBOX           TASK_MBOX_1     /* Messages to BTIF   */
+
+/* callbacks
+*/
+typedef void (*tBTU_TIMER_CALLBACK)(TIMER_LIST_ENT *p_tle);
+typedef void (*tBTU_EVENT_CALLBACK)(BT_HDR *p_hdr);
+
+
+/* Define the timer types maintained by BTU
+*/
+#define BTU_TTYPE_BTM_DEV_CTL       1
+#define BTU_TTYPE_L2CAP_LINK        2
+#define BTU_TTYPE_L2CAP_CHNL        3
+#define BTU_TTYPE_L2CAP_HOLD        4
+#define BTU_TTYPE_SDP               5
+#define BTU_TTYPE_BTM_SCO           6
+#define BTU_TTYPE_BTM_ACL           9
+#define BTU_TTYPE_BTM_RMT_NAME      10
+#define BTU_TTYPE_RFCOMM_MFC        11
+#define BTU_TTYPE_RFCOMM_PORT       12
+#define BTU_TTYPE_TCS_L2CAP         13
+#define BTU_TTYPE_TCS_CALL          14
+#define BTU_TTYPE_TCS_WUG           15
+#define BTU_TTYPE_AUTO_SYNC         16
+#define BTU_TTYPE_CTP_RECON         17
+#define BTU_TTYPE_CTP_T100          18
+#define BTU_TTYPE_CTP_GUARD         19
+#define BTU_TTYPE_CTP_DETACH        20
+
+#define BTU_TTYPE_SPP_CONN_RETRY    21
+#define BTU_TTYPE_USER_FUNC         22
+
+#define BTU_TTYPE_FTP_DISC          25
+#define BTU_TTYPE_OPP_DISC          26
+
+#define BTU_TTYPE_CTP_TL_DISCVY     28
+#define BTU_TTYPE_IPFRAG_TIMER      29
+#define BTU_TTYPE_HSP2_AT_CMD_TO    30
+#define BTU_TTYPE_HSP2_REPEAT_RING  31
+
+#define BTU_TTYPE_CTP_GW_INIT       32
+#define BTU_TTYPE_CTP_GW_CONN       33
+#define BTU_TTYPE_CTP_GW_IDLE       35
+
+#define BTU_TTYPE_ICP_L2CAP         36
+#define BTU_TTYPE_ICP_T100          37
+
+#define BTU_TTYPE_HSP2_WAIT_OK      38
+
+/* HCRP Timers */
+#define BTU_TTYPE_HCRP_NOTIF_REG    39
+#define BTU_TTYPE_HCRP_PROTO_RSP    40
+#define BTU_TTYPE_HCRP_CR_GRANT     41
+#define BTU_TTYPE_HCRP_CR_CHECK     42
+#define BTU_TTYPE_HCRP_W4_CLOSE     43
+
+/* HCRPM Timers */
+#define BTU_TTYPE_HCRPM_NOTIF_REG   44
+#define BTU_TTYPE_HCRPM_NOTIF_KEEP  45
+#define BTU_TTYPE_HCRPM_API_RSP     46
+#define BTU_TTYPE_HCRPM_W4_OPEN     47
+#define BTU_TTYPE_HCRPM_W4_CLOSE    48
+
+/* BNEP Timers */
+#define BTU_TTYPE_BNEP              50
+
+/* OBX */
+#define BTU_TTYPE_OBX_CLIENT_TO     51
+#define BTU_TTYPE_OBX_SERVER_TO     52
+#define BTU_TTYPE_OBX_SVR_SESS_TO   53
+
+
+#define BTU_TTYPE_HSP2_SDP_FAIL_TO  55
+#define BTU_TTYPE_HSP2_SDP_RTRY_TO  56
+
+/* BTU internal */
+/* unused                           60 */
+
+#define BTU_TTYPE_AVDT_CCB_RET      61
+#define BTU_TTYPE_AVDT_CCB_RSP      62
+#define BTU_TTYPE_AVDT_CCB_IDLE     63
+#define BTU_TTYPE_AVDT_SCB_TC       64
+
+#define BTU_TTYPE_HID_DEV_REPAGE_TO 65
+#define BTU_TTYPE_HID_HOST_REPAGE_TO 66
+
+#define BTU_TTYPE_HSP2_DELAY_CKPD_RCV 67
+
+#define BTU_TTYPE_SAP_TO            68
+
+/* BPP Timer */
+#define BTU_TTYPE_BPP_REF_CHNL     72
+
+/* LP HC idle Timer */
+#define BTU_TTYPE_LP_HC_IDLE_TO 74
+
+/* Patch RAM Timer */
+#define BTU_TTYPE_PATCHRAM_TO 75
+
+/* eL2CAP Info Request and other proto cmds timer */
+#define BTU_TTYPE_L2CAP_FCR_ACK     78
+#define BTU_TTYPE_L2CAP_INFO        79
+
+/* BTU internal for BR/EDR and AMP HCI command timeout (reserve up to 3 AMP controller) */
+#define BTU_TTYPE_BTU_CMD_CMPL                      80
+#define BTU_TTYPE_BTU_AMP1_CMD_CMPL                 81
+#define BTU_TTYPE_BTU_AMP2_CMD_CMPL                 82
+#define BTU_TTYPE_BTU_AMP3_CMD_CMPL                 83
+
+#define BTU_TTYPE_MCA_CCB_RSP                       98
+
+/* BTU internal timer for BLE activity */
+#define BTU_TTYPE_BLE_INQUIRY                       99
+#define BTU_TTYPE_BLE_GAP_LIM_DISC                  100
+#define BTU_TTYPE_ATT_WAIT_FOR_RSP                  101
+#define BTU_TTYPE_SMP_PAIRING_CMD                   102
+#define BTU_TTYPE_BLE_RANDOM_ADDR                   103
+#define BTU_TTYPE_ATT_WAIT_FOR_APP_RSP              104
+#define BTU_TTYPE_ATT_WAIT_FOR_IND_ACK              105
+#define BTU_TTYPE_BLE_SCAN_PARAM_IDLE               106
+
+/* Define the BTU_TASK APPL events
+*/
+#if (defined(NFC_SHARED_TRANSPORT_ENABLED) && (NFC_SHARED_TRANSPORT_ENABLED==TRUE))
+#define BTU_NFC_AVAILABLE_EVT   EVENT_MASK(APPL_EVT_0)  /* Notifies BTU task that NFC is available (used for shared NFC+BT transport) */
+#endif
+
+/* This is the inquiry response information held by BTU, and available
+** to applications.
+*/
+typedef struct
+{
+    BD_ADDR     remote_bd_addr;
+    UINT8       page_scan_rep_mode;
+    UINT8       page_scan_per_mode;
+    UINT8       page_scan_mode;
+    DEV_CLASS   dev_class;
+    UINT16      clock_offset;
+} tBTU_INQ_INFO;
+
+
+
+#define BTU_MAX_REG_TIMER     (2)   /* max # timer callbacks which may register */
+#define BTU_MAX_REG_EVENT     (6)   /* max # event callbacks which may register */
+#define BTU_DEFAULT_DATA_SIZE (0x2a0)
+
+#if (BLE_INCLUDED == TRUE)
+#define BTU_DEFAULT_BLE_DATA_SIZE   (27)
+#endif
+
+/* structure to hold registered timers */
+typedef struct
+{
+    TIMER_LIST_ENT          *p_tle;      /* timer entry */
+    tBTU_TIMER_CALLBACK     timer_cb;    /* callback triggered when timer expires */
+} tBTU_TIMER_REG;
+
+/* structure to hold registered event callbacks */
+typedef struct
+{
+    UINT16                  event_range;  /* start of event range */
+    tBTU_EVENT_CALLBACK     event_cb;     /* callback triggered when event is in range */
+} tBTU_EVENT_REG;
+
+#define NFC_MAX_LOCAL_CTRLS     0
+
+/* the index to BTU command queue array */
+#define NFC_CONTROLLER_ID       (1)
+#define BTU_MAX_LOCAL_CTRLS     (1 + NFC_MAX_LOCAL_CTRLS) /* only BR/EDR */
+
+/* AMP HCI control block */
+typedef struct
+{
+    BUFFER_Q         cmd_xmit_q;
+    BUFFER_Q         cmd_cmpl_q;
+    UINT16           cmd_window;
+    TIMER_LIST_ENT   cmd_cmpl_timer;        /* Command complete timer */
+#if (defined(BTU_CMD_CMPL_TOUT_DOUBLE_CHECK) && BTU_CMD_CMPL_TOUT_DOUBLE_CHECK == TRUE)
+    BOOLEAN          checked_hcisu;
+#endif
+} tHCI_CMD_CB;
+
+/* Define structure holding BTU variables
+*/
+typedef struct
+{
+    tBTU_TIMER_REG   timer_reg[BTU_MAX_REG_TIMER];
+    tBTU_EVENT_REG   event_reg[BTU_MAX_REG_EVENT];
+
+    TIMER_LIST_Q  quick_timer_queue;        /* Timer queue for transport level (100/10 msec)*/
+    TIMER_LIST_Q  timer_queue;              /* Timer queue for normal BTU task (1 second)   */
+
+    TIMER_LIST_ENT   cmd_cmpl_timer;        /* Command complete timer */
+
+    UINT16    hcit_acl_data_size;           /* Max ACL data size across HCI transport    */
+    UINT16    hcit_acl_pkt_size;            /* Max ACL packet size across HCI transport  */
+                                            /* (this is data size plus 4 bytes overhead) */
+
+#if BLE_INCLUDED == TRUE
+    UINT16    hcit_ble_acl_data_size;           /* Max BLE ACL data size across HCI transport    */
+    UINT16    hcit_ble_acl_pkt_size;            /* Max BLE ACL packet size across HCI transport  */
+                                            /* (this is data size plus 4 bytes overhead) */
+#endif
+
+    BOOLEAN     reset_complete;             /* TRUE after first ack from device received */
+    UINT8       trace_level;                /* Trace level for HCI layer */
+
+    tHCI_CMD_CB hci_cmd_cb[BTU_MAX_LOCAL_CTRLS]; /* including BR/EDR */
+} tBTU_CB;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Global BTU data */
+#if BTU_DYNAMIC_MEMORY == FALSE
+BTU_API extern tBTU_CB  btu_cb;
+#else
+BTU_API extern tBTU_CB *btu_cb_ptr;
+#define btu_cb (*btu_cb_ptr)
+#endif
+
+BTU_API extern const BD_ADDR        BT_BD_ANY;
+
+/* Functions provided by btu_task.c
+************************************
+*/
+BTU_API extern void btu_start_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout);
+BTU_API extern void btu_stop_timer (TIMER_LIST_ENT *p_tle);
+BTU_API extern void btu_register_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout, tBTU_TIMER_CALLBACK timer_cb);
+BTU_API extern void btu_deregister_timer(TIMER_LIST_ENT *p_tle);
+BTU_API extern UINT32 btu_remaining_time (TIMER_LIST_ENT *p_tle);
+
+
+BTU_API extern void btu_register_event_range (UINT16 range, tBTU_EVENT_CALLBACK event_cb);
+BTU_API extern void btu_deregister_event_range (UINT16 range);
+BTU_API extern void btu_uipc_rx_cback(BT_HDR *p_msg);
+
+BTU_API extern void btu_hcif_flush_cmd_queue(void);
+/*
+** Quick Timer
+*/
+#if defined(QUICK_TIMER_TICKS_PER_SEC) && (QUICK_TIMER_TICKS_PER_SEC > 0)
+#define QUICK_TIMER_TICKS (GKI_SECS_TO_TICKS (1)/QUICK_TIMER_TICKS_PER_SEC)
+BTU_API extern void btu_start_quick_timer (TIMER_LIST_ENT *p_tle, UINT16 type, UINT32 timeout);
+BTU_API extern void btu_stop_quick_timer (TIMER_LIST_ENT *p_tle);
+BTU_API extern void btu_process_quick_timer_evt (void);
+BTU_API extern void process_quick_timer_evt (TIMER_LIST_Q *p_tlq);
+#endif
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+BTU_API extern void btu_check_bt_sleep (void);
+#endif
+
+/* Functions provided by btu_hcif.c
+************************************
+*/
+BTU_API extern void  btu_hcif_process_event (UINT8 controller_id, BT_HDR *p_buf);
+BTU_API extern void  btu_hcif_send_cmd (UINT8 controller_id, BT_HDR *p_msg);
+BTU_API extern void  btu_hcif_send_host_rdy_for_data(void);
+BTU_API extern void  btu_hcif_cmd_timeout (UINT8 controller_id);
+
+/* Functions provided by btu_core.c
+************************************
+*/
+BTU_API extern void  btu_init_core(void);
+BTU_API extern void  BTE_Init(void);
+BTU_API extern UINT16 BTU_AclPktSize(void);
+BTU_API extern UINT16 BTU_BleAclPktSize(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/stack/include/dyn_mem.h b/stack/include/dyn_mem.h
new file mode 100644
index 0000000..3ad8361
--- /dev/null
+++ b/stack/include/dyn_mem.h
@@ -0,0 +1,187 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef DYN_MEM_H
+#define DYN_MEM_H
+
+/****************************************************************************
+** Define memory usage for GKI (if not defined in bdroid_buildcfg.h)
+**  The default for GKI is to use static memory allocation for its control
+**  block.
+*/
+#ifndef GKI_DYNAMIC_MEMORY
+#define GKI_DYNAMIC_MEMORY  FALSE
+#endif
+
+/****************************************************************************
+** Define memory usage for each CORE component (if not defined in bdroid_buildcfg.h)
+**  The default for each component is to use static memory allocations.
+*/
+#ifndef BTU_DYNAMIC_MEMORY
+#define BTU_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef BTM_DYNAMIC_MEMORY
+#define BTM_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef SDP_DYNAMIC_MEMORY
+#define SDP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef L2C_DYNAMIC_MEMORY
+#define L2C_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef RFC_DYNAMIC_MEMORY
+#define RFC_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef TCS_DYNAMIC_MEMORY
+#define TCS_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef OBX_DYNAMIC_MEMORY
+#define OBX_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef BNEP_DYNAMIC_MEMORY
+#define BNEP_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef AVDT_DYNAMIC_MEMORY
+#define AVDT_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef AVCT_DYNAMIC_MEMORY
+#define AVCT_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef MCA_DYNAMIC_MEMORY
+#define MCA_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef GATT_DYNAMIC_MEMORY
+#define GATT_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef SMP_DYNAMIC_MEMORY
+#define SMP_DYNAMIC_MEMORY  FALSE
+#endif
+
+/****************************************************************************
+** Define memory usage for each PROFILE component (if not defined in bdroid_buildcfg.h)
+**  The default for each component is to use static memory allocations.
+*/
+#ifndef A2D_DYNAMIC_MEMORY
+#define A2D_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef VDP_DYNAMIC_MEMORY
+#define VDP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef AVRC_DYNAMIC_MEMORY
+#define AVRC_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef BIP_DYNAMIC_MEMORY
+#define BIP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef BPP_DYNAMIC_MEMORY
+#define BPP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef CTP_DYNAMIC_MEMORY
+#define CTP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef DUN_DYNAMIC_MEMORY
+#define DUN_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef FTP_DYNAMIC_MEMORY
+#define FTP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef GAP_DYNAMIC_MEMORY
+#define GAP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef GOEP_DYNAMIC_MEMORY
+#define GOEP_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef HCRP_DYNAMIC_MEMORY
+#define HCRP_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef HFP_DYNAMIC_MEMORY
+#define HFP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef HID_DYNAMIC_MEMORY
+#define HID_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef HSP2_DYNAMIC_MEMORY
+#define HSP2_DYNAMIC_MEMORY FALSE
+#endif
+
+#ifndef ICP_DYNAMIC_MEMORY
+#define ICP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef OPP_DYNAMIC_MEMORY
+#define OPP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef PAN_DYNAMIC_MEMORY
+#define PAN_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef SPP_DYNAMIC_MEMORY
+#define SPP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef SLIP_DYNAMIC_MEMORY
+#define SLIP_DYNAMIC_MEMORY  FALSE
+#endif
+
+#ifndef LLCP_DYNAMIC_MEMORY
+#define LLCP_DYNAMIC_MEMORY  FALSE
+#endif
+
+/****************************************************************************
+** Define memory usage for BTA (if not defined in bdroid_buildcfg.h)
+**  The default for each component is to use static memory allocations.
+*/
+#ifndef BTA_DYNAMIC_MEMORY
+#define BTA_DYNAMIC_MEMORY FALSE
+#endif
+
+/****************************************************************************
+** Define memory usage for BT Trace (if not defined in bdroid_buildcfg.h)
+**  The default is to use static memory allocations.
+*/
+#ifndef BTTRC_DYNAMIC_MEMORY
+#define BTTRC_DYNAMIC_MEMORY FALSE
+#endif
+
+#endif  /* #ifdef DYN_MEM_H */
+
diff --git a/stack/include/gatt_api.h b/stack/include/gatt_api.h
new file mode 100644
index 0000000..2d13e5a
--- /dev/null
+++ b/stack/include/gatt_api.h
@@ -0,0 +1,1128 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GATT_API_H
+#define GATT_API_H
+
+#include "bt_target.h"
+#include "gattdefs.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+/* Success code and error codes */
+#define  GATT_SUCCESS                        0x0000
+#define  GATT_INVALID_HANDLE                 0x0001
+#define  GATT_READ_NOT_PERMIT                0x0002
+#define  GATT_WRITE_NOT_PERMIT               0x0003
+#define  GATT_INVALID_PDU                    0x0004
+#define  GATT_INSUF_AUTHENTICATION           0x0005
+#define  GATT_REQ_NOT_SUPPORTED              0x0006
+#define  GATT_INVALID_OFFSET                 0x0007
+#define  GATT_INSUF_AUTHORIZATION            0x0008
+#define  GATT_PREPARE_Q_FULL                 0x0009
+#define  GATT_NOT_FOUND                      0x000a
+#define  GATT_NOT_LONG                       0x000b
+#define  GATT_INSUF_KEY_SIZE                 0x000c
+#define  GATT_INVALID_ATTR_LEN               0x000d
+#define  GATT_ERR_UNLIKELY                   0x000e
+#define  GATT_INSUF_ENCRYPTION               0x000f
+#define  GATT_UNSUPPORT_GRP_TYPE             0x0010
+#define  GATT_INSUF_RESOURCE                 0x0011
+
+
+#define  GATT_ILLEGAL_PARAMETER              0x0087
+#define  GATT_NO_RESOURCES                   0x0080
+#define  GATT_INTERNAL_ERROR                 0x0081
+#define  GATT_WRONG_STATE                    0x0082
+#define  GATT_DB_FULL                        0x0083
+#define  GATT_BUSY                           0x0084
+#define  GATT_ERROR                          0x0085
+#define  GATT_CMD_STARTED                    0x0086
+#define  GATT_PENDING                        0x0088
+#define  GATT_AUTH_FAIL                      0x0089
+#define  GATT_MORE                           0x008a
+#define  GATT_INVALID_CFG                    0x008b
+#define  GATT_SERVICE_STARTED                0x008c
+#define  GATT_ENCRYPED_MITM                  GATT_SUCCESS
+#define  GATT_ENCRYPED_NO_MITM               0x008d
+#define  GATT_NOT_ENCRYPTED                  0x008e
+
+
+typedef UINT8 tGATT_STATUS;
+
+
+#define  GATT_RSP_ERROR                      0x01
+#define  GATT_REQ_MTU                        0x02
+#define  GATT_RSP_MTU                        0x03
+#define  GATT_REQ_FIND_INFO                  0x04
+#define  GATT_RSP_FIND_INFO                  0x05
+#define  GATT_REQ_FIND_TYPE_VALUE            0x06
+#define  GATT_RSP_FIND_TYPE_VALUE            0x07
+#define  GATT_REQ_READ_BY_TYPE               0x08
+#define  GATT_RSP_READ_BY_TYPE               0x09
+#define  GATT_REQ_READ                       0x0A
+#define  GATT_RSP_READ                       0x0B
+#define  GATT_REQ_READ_BLOB                  0x0C
+#define  GATT_RSP_READ_BLOB                  0x0D
+#define  GATT_REQ_READ_MULTI                 0x0E
+#define  GATT_RSP_READ_MULTI                 0x0F
+#define  GATT_REQ_READ_BY_GRP_TYPE           0x10
+#define  GATT_RSP_READ_BY_GRP_TYPE           0x11
+#define  GATT_REQ_WRITE                      0x12 /*                 0001-0010 (write)*/
+#define  GATT_RSP_WRITE                      0x13
+#define  GATT_CMD_WRITE                      0x52 /* changed in V4.0 01001-0010(write cmd)*/
+#define  GATT_REQ_PREPARE_WRITE              0x16
+#define  GATT_RSP_PREPARE_WRITE              0x17
+#define  GATT_REQ_EXEC_WRITE                 0x18
+#define  GATT_RSP_EXEC_WRITE                 0x19
+#define  GATT_HANDLE_VALUE_NOTIF             0x1B
+#define  GATT_HANDLE_VALUE_IND               0x1D
+#define  GATT_HANDLE_VALUE_CONF              0x1E
+#define  GATT_SIGN_CMD_WRITE                 0xD2 /* changed in V4.0 1101-0010 (signed write)  see write cmd above*/
+#define  GATT_OP_CODE_MAX                    GATT_HANDLE_VALUE_CONF + 1 /* 0x1E = 30 + 1 = 31*/
+
+
+#define  GATT_HANDLE_IS_VALID(x) ((x) != 0)
+
+#define GATT_CONN_UNKNOWN                   0
+#define GATT_CONN_NO_RESOURCES              L2CAP_CONN_NO_RESOURCES         /* connection fail for l2cap resource failure */
+#define GATT_CONN_TIMEOUT                   HCI_ERR_CONNECTION_TOUT         /* 0x08 connection timeout  */
+#define GATT_CONN_TERMINATE_PEER_USER       HCI_ERR_PEER_USER               /* 0x13 connection terminate by peer user  */
+#define GATT_CONN_TERMINATE_LOCAL_HOST      HCI_ERR_CONN_CAUSE_LOCAL_HOST   /* 0x16 connectionterminated by local host  */
+#define GATT_CONN_FAIL_ESTABLISH            HCI_ERR_CONN_FAILED_ESTABLISHMENT/* 0x03E connection fail to establish  */
+#define GATT_CONN_LMP_TIMEOUT               HCI_ERR_LMP_RESPONSE_TIMEOUT     /* 0x22 connection fail for LMP response tout */
+#define GATT_CONN_CANCEL                    L2CAP_CONN_CANCEL                /* 0x0100 L2CAP connection cancelled  */
+typedef UINT16 tGATT_DISCONN_REASON;
+
+/* MAX GATT MTU size
+*/
+#ifndef GATT_MAX_MTU_SIZE
+    #define GATT_MAX_MTU_SIZE     517
+#endif
+
+/* max legth of an attribute value
+*/
+#ifndef GATT_MAX_ATTR_LEN
+    #define GATT_MAX_ATTR_LEN     600
+#endif
+
+/* default GATT MTU size over LE link
+*/
+#define GATT_DEF_BLE_MTU_SIZE       23
+
+/* invalid connection ID
+*/
+#define GATT_INVALID_CONN_ID        0xFFFF
+
+#ifndef GATT_CL_MAX_LCB
+    #define GATT_CL_MAX_LCB     22
+#endif
+
+#ifndef GATT_MAX_SCCB
+    #define GATT_MAX_SCCB       10
+#endif
+
+
+
+/* GATT notification caching timer, default to be three seconds
+*/
+#ifndef GATTC_NOTIF_TIMEOUT
+    #define GATTC_NOTIF_TIMEOUT   3
+#endif
+
+/*****************************************************************************
+** GATT Structure Definition
+*****************************************************************************/
+
+/* Attribute permissions
+*/
+#define GATT_PERM_READ              (1 << 0) /* bit 0 */
+#define GATT_PERM_READ_ENCRYPTED    (1 << 1) /* bit 1 */
+#define GATT_PERM_READ_ENC_MITM     (1 << 2) /* bit 2 */
+#define GATT_PERM_WRITE             (1 << 4) /* bit 4 */
+#define GATT_PERM_WRITE_ENCRYPTED   (1 << 5) /* bit 5 */
+#define GATT_PERM_WRITE_ENC_MITM    (1 << 6) /* bit 6 */
+#define GATT_PERM_WRITE_SIGNED      (1 << 7) /* bit 7 */
+#define GATT_PERM_WRITE_SIGNED_MITM (1 << 8) /* bit 8 */
+typedef UINT16 tGATT_PERM;
+
+#define GATT_ENCRYPT_KEY_SIZE_MASK  (0xF000) /* the MS nibble of tGATT_PERM; key size 7=0; size 16=9 */
+
+#define GATT_READ_ALLOWED           (GATT_PERM_READ | GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
+#define GATT_READ_AUTH_REQUIRED     (GATT_PERM_READ_ENC_MITM)
+#define GATT_READ_MITM_REQUIRED     (GATT_PERM_READ_ENC_MITM)
+#define GATT_READ_ENCRYPTED_REQUIRED   (GATT_PERM_READ_ENCRYPTED | GATT_PERM_READ_ENC_MITM)
+
+
+#define GATT_WRITE_ALLOWED          (GATT_PERM_WRITE | GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM | \
+                                     GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
+
+#define GATT_WRITE_AUTH_REQUIRED    (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_SIGNED)
+
+#define GATT_WRITE_MITM_REQUIRED    (GATT_PERM_WRITE_ENC_MITM | GATT_PERM_WRITE_SIGNED_MITM)
+
+#define GATT_WRITE_ENCRYPTED_PERM   (GATT_PERM_WRITE_ENCRYPTED | GATT_PERM_WRITE_ENC_MITM)
+
+#define GATT_WRITE_SIGNED_PERM      (GATT_PERM_WRITE_SIGNED | GATT_PERM_WRITE_SIGNED_MITM)
+
+
+/* Characteristic properties
+*/
+#define GATT_CHAR_PROP_BIT_BROADCAST    (1 << 0)
+#define GATT_CHAR_PROP_BIT_READ         (1 << 1)
+#define GATT_CHAR_PROP_BIT_WRITE_NR     (1 << 2)
+#define GATT_CHAR_PROP_BIT_WRITE        (1 << 3)
+#define GATT_CHAR_PROP_BIT_NOTIFY       (1 << 4)
+#define GATT_CHAR_PROP_BIT_INDICATE     (1 << 5)
+#define GATT_CHAR_PROP_BIT_AUTH         (1 << 6)
+#define GATT_CHAR_PROP_BIT_EXT_PROP     (1 << 7)
+typedef UINT8 tGATT_CHAR_PROP;
+
+
+/* Format of the value of a characteristic. enumeration type
+*/
+enum
+{
+    GATT_FORMAT_RES,            /* rfu */
+    GATT_FORMAT_BOOL,           /* 0x01 boolean */
+    GATT_FORMAT_2BITS,           /* 0x02 2 bit */
+    GATT_FORMAT_NIBBLE,         /* 0x03 nibble */
+    GATT_FORMAT_UINT8,          /* 0x04 uint8 */
+    GATT_FORMAT_UINT12,         /* 0x05 uint12 */
+    GATT_FORMAT_UINT16,         /* 0x06 uint16 */
+    GATT_FORMAT_UINT24,         /* 0x07 uint24 */
+    GATT_FORMAT_UINT32,         /* 0x08 uint32 */
+    GATT_FORMAT_UINT48,         /* 0x09 uint48 */
+    GATT_FORMAT_UINT64,         /* 0x0a uint64 */
+    GATT_FORMAT_UINT128,        /* 0x0B uint128 */
+    GATT_FORMAT_SINT8,          /* 0x0C signed 8 bit integer */
+    GATT_FORMAT_SINT12,         /* 0x0D signed 12 bit integer */
+    GATT_FORMAT_SINT16,         /* 0x0E signed 16 bit integer */
+    GATT_FORMAT_SINT24,         /* 0x0F signed 24 bit integer */
+    GATT_FORMAT_SINT32,         /* 0x10 signed 32 bit integer */
+    GATT_FORMAT_SINT48,         /* 0x11 signed 48 bit integer */
+    GATT_FORMAT_SINT64,         /* 0x12 signed 64 bit integer */
+    GATT_FORMAT_SINT128,        /* 0x13 signed 128 bit integer */
+    GATT_FORMAT_FLOAT32,        /* 0x14 float 32 */
+    GATT_FORMAT_FLOAT64,        /* 0x15 float 64*/
+    GATT_FORMAT_SFLOAT,         /* 0x16 IEEE-11073 16 bit SFLOAT */
+    GATT_FORMAT_FLOAT,          /* 0x17 IEEE-11073 32 bit SFLOAT */
+    GATT_FORMAT_DUINT16,        /* 0x18 IEEE-20601 format */
+    GATT_FORMAT_UTF8S,          /* 0x19 UTF-8 string */
+    GATT_FORMAT_UTF16S,         /* 0x1a UTF-16 string */
+    GATT_FORMAT_STRUCT,         /* 0x1b Opaque structure*/
+    GATT_FORMAT_MAX             /* 0x1c or above reserved */
+};
+typedef UINT8 tGATT_FORMAT;
+
+/* Characteristic Presentation Format Descriptor value
+*/
+typedef struct
+{
+    UINT16              unit;       /* as UUIUD defined by SIG */
+    UINT16              descr;       /* as UUID as defined by SIG */
+    tGATT_FORMAT        format;
+    INT8                exp;
+    UINT8               name_spc;   /* The name space of the description */
+} tGATT_CHAR_PRES;
+
+#define GATT_VALID_RANGE_MAX_SIZE       16
+typedef struct
+{
+    UINT8                   format;
+    UINT16                  len;
+    UINT8                   lower_range[GATT_VALID_RANGE_MAX_SIZE]; /* in little endian format */
+    UINT8                   upper_range[GATT_VALID_RANGE_MAX_SIZE];
+} tGATT_VALID_RANGE;
+
+/* Characteristic Aggregate Format attribute value
+*/
+#define GATT_AGGR_HANDLE_NUM_MAX        10
+typedef struct
+{
+    UINT8                   num_handle;
+    UINT16                  handle_list[GATT_AGGR_HANDLE_NUM_MAX];
+} tGATT_CHAR_AGGRE;
+
+/* Characteristic descriptor: Extended Properties value
+*/
+#define GATT_CHAR_BIT_REL_WRITE    0x0001       /* permits reliable writes of the Characteristic Value */
+#define GATT_CHAR_BIT_WRITE_AUX    0x0002       /* permits writes to the characteristic descriptor */
+
+
+/* characteristic descriptor: client configuration value
+*/
+#define GATT_CLT_CONFIG_NONE               0x0000
+#define GATT_CLT_CONFIG_NOTIFICATION       0x0001
+#define GATT_CLT_CONFIG_INDICATION         0x0002
+typedef UINT16 tGATT_CLT_CHAR_CONFIG;
+
+
+/* characteristic descriptor: server configuration value
+*/
+#define GATT_SVR_CONFIG_NONE                     0x0000
+#define GATT_SVR_CONFIG_BROADCAST                0x0001
+typedef UINT16 tGATT_SVR_CHAR_CONFIG;
+
+/* Characteristic descriptor: Extended Properties value
+*/
+#define GATT_CHAR_BIT_REL_WRITE    0x0001       /* permits reliable writes of the Characteristic Value */
+#define GATT_CHAR_BIT_WRITE_AUX    0x0002       /* permits writes to the characteristic descriptor */
+
+/* authentication requirement
+*/
+#define GATT_AUTH_REQ_NONE              0
+#define GATT_AUTH_REQ_NO_MITM           1   /* unauthenticated encryption */
+#define GATT_AUTH_REQ_MITM              2   /* authenticated encryption */
+#define GATT_AUTH_REQ_SIGNED_NO_MITM    3
+#define GATT_AUTH_REQ_SIGNED_MITM       4
+typedef UINT8 tGATT_AUTH_REQ;
+
+/* Attribute Value structure
+*/
+typedef struct
+{
+    UINT16          conn_id;
+    UINT16          handle;     /* attribute handle */
+    UINT16          offset;     /* attribute value offset, if no offfset is needed for the command, ignore it */
+    UINT16          len;        /* length of attribute value */
+    tGATT_AUTH_REQ  auth_req;   /*  authentication request */
+    UINT8           value[GATT_MAX_ATTR_LEN];  /* the actual attribute value */
+} tGATT_VALUE;
+
+/* Union of the event data which is used in the server respond API to carry the server response information
+*/
+typedef union
+{
+    /* data type            member          event   */
+    tGATT_VALUE             attr_value;     /* READ, HANDLE_VALUE_IND, PREPARE_WRITE */
+                                            /* READ_BLOB, READ_BY_TYPE */
+    UINT16                  handle;         /* WRITE, WRITE_BLOB */
+
+} tGATTS_RSP;
+
+/* Transports for the primary service  */
+enum
+{
+    GATT_TRANSPORT_LE,
+    GATT_TRANSPORT_BR_EDR,
+    GATT_TRANSPORT_LE_BR_EDR
+};
+typedef UINT8 tGATT_TRANSPORT;
+
+#define GATT_PREP_WRITE_CANCEL   0x00
+#define GATT_PREP_WRITE_EXEC     0x01
+typedef UINT8   tGATT_EXEC_FLAG;
+
+/* read request always based on UUID */
+typedef struct
+{
+    UINT16        handle;
+    UINT16        offset;
+    BOOLEAN       is_long;
+} tGATT_READ_REQ;
+
+/* write request data */
+typedef struct
+{
+    UINT16          handle;     /* attribute handle */
+    UINT16          offset;     /* attribute value offset, if no offfset is needed for the command, ignore it */
+    UINT16          len;        /* length of attribute value */
+    UINT8           value[GATT_MAX_ATTR_LEN];  /* the actual attribute value */
+    BOOLEAN         need_rsp;   /* need write response */
+    BOOLEAN         is_prep;    /* is prepare write */
+} tGATT_WRITE_REQ;
+
+/* callback data for server access request from client */
+typedef union
+{
+    tGATT_READ_REQ         read_req;       /* read request, read by Type, read blob */
+
+    tGATT_WRITE_REQ        write_req;    /* write */
+                                         /* prepare write */
+                                         /* write blob */
+    UINT16                 handle;       /* handle value confirmation */
+    UINT16                 mtu;          /* MTU exchange request */
+    tGATT_EXEC_FLAG        exec_write;    /* execute write */
+} tGATTS_DATA;
+
+typedef UINT8 tGATT_SERV_IF;               /* GATT Service Interface */
+
+enum
+{
+    GATTS_REQ_TYPE_READ = 1,        /* Attribute read request */
+    GATTS_REQ_TYPE_WRITE,           /* Attribute write request */
+    GATTS_REQ_TYPE_WRITE_EXEC,      /* Execute write */
+    GATTS_REQ_TYPE_MTU,             /* MTU exchange information */
+    GATTS_REQ_TYPE_CONF             /* handle value confirmation */
+};
+typedef UINT8   tGATTS_REQ_TYPE;
+
+
+
+/* Client Used Data Structure
+*/
+/* definition of different discovery types */
+enum
+{
+    GATT_DISC_SRVC_ALL = 1,     /* discover all services */
+    GATT_DISC_SRVC_BY_UUID,     /* discover service of a special type */
+    GATT_DISC_INC_SRVC,         /* discover the included service within a service */
+    GATT_DISC_CHAR,             /* discover characteristics of a service with/without type requirement */
+    GATT_DISC_CHAR_DSCPT,       /* discover characteristic descriptors of a character */
+    GATT_DISC_MAX               /* maximnun discover type */
+};
+typedef UINT8   tGATT_DISC_TYPE;
+
+/* Discover parameters of different discovery types
+*/
+typedef struct
+{
+    tBT_UUID    service;
+    UINT16      s_handle;
+    UINT16      e_handle;
+}tGATT_DISC_PARAM;
+
+/* GATT read type enumeration
+*/
+enum
+{
+    GATT_READ_BY_TYPE =        1,
+    GATT_READ_BY_HANDLE,
+    GATT_READ_MULTIPLE,
+    GATT_READ_CHAR_VALUE,
+    GATT_READ_PARTIAL,
+    GATT_READ_MAX
+};
+typedef UINT8 tGATT_READ_TYPE;
+
+/* Read By Type Request (GATT_READ_BY_TYPE) Data
+*/
+typedef struct
+{
+    tGATT_AUTH_REQ      auth_req;
+    UINT16              s_handle;
+    UINT16              e_handle;
+    tBT_UUID            uuid;
+} tGATT_READ_BY_TYPE;
+
+/*   GATT_READ_MULTIPLE request data
+*/
+#define GATT_MAX_READ_MULTI_HANDLES      10           /* Max attributes to read in one request */
+typedef struct
+{
+    tGATT_AUTH_REQ          auth_req;
+    UINT16                  num_handles;                            /* number of handles to read */
+    UINT16                  handles[GATT_MAX_READ_MULTI_HANDLES];   /* handles list to be read */
+} tGATT_READ_MULTI;
+
+/*   Read By Handle Request (GATT_READ_BY_HANDLE) data */
+typedef struct
+{
+    tGATT_AUTH_REQ         auth_req;
+    UINT16                 handle;
+} tGATT_READ_BY_HANDLE;
+
+/*   READ_BT_HANDLE_Request data */
+typedef struct
+{
+    tGATT_AUTH_REQ         auth_req;
+    UINT16                 handle;
+    UINT16                 offset;
+} tGATT_READ_PARTIAL;
+
+/* Read Request Data
+*/
+typedef union
+{
+    tGATT_READ_BY_TYPE   service;
+    tGATT_READ_BY_TYPE   char_type;        /* characterisitc type */
+    tGATT_READ_MULTI     read_multiple;
+    tGATT_READ_BY_HANDLE by_handle;
+    tGATT_READ_PARTIAL   partial;
+} tGATT_READ_PARAM;
+
+/* GATT write type enumeration */
+enum
+{
+    GATT_WRITE_NO_RSP = 1,
+    GATT_WRITE ,
+    GATT_WRITE_PREPARE
+};
+typedef UINT8 tGATT_WRITE_TYPE;
+
+/* Client Operation Complete Callback Data
+*/
+typedef union
+{
+    tGATT_VALUE          att_value;
+    UINT16               mtu;
+    UINT16               handle;
+} tGATT_CL_COMPLETE;
+
+/* GATT client operation type, used in client callback function
+*/
+#define GATTC_OPTYPE_NONE                 0
+#define GATTC_OPTYPE_DISCOVERY            1
+#define GATTC_OPTYPE_READ                 2
+#define GATTC_OPTYPE_WRITE                3
+#define GATTC_OPTYPE_EXE_WRITE            4
+#define GATTC_OPTYPE_CONFIG               5
+#define GATTC_OPTYPE_NOTIFICATION         6
+#define GATTC_OPTYPE_INDICATION           7
+typedef UINT8 tGATTC_OPTYPE;
+
+/* characteristic declaration
+*/
+typedef struct
+{
+    tGATT_CHAR_PROP       char_prop;   /* characterisitc properties */
+    UINT16                val_handle;  /* characteristic value attribute handle */
+    tBT_UUID              char_uuid;   /* characteristic UUID type */
+} tGATT_CHAR_DCLR_VAL;
+
+/* primary service group data
+*/
+typedef struct
+{
+    UINT16          e_handle;       /* ending handle of the group */
+    tBT_UUID        service_type;   /* group type */
+} tGATT_GROUP_VALUE;
+
+
+/* included service attribute value
+*/
+typedef struct
+{
+    tBT_UUID    service_type;       /* included service UUID */
+    UINT16      s_handle;           /* starting handle */
+    UINT16      e_handle;           /* ending handle */
+} tGATT_INCL_SRVC;
+
+typedef union
+{
+    tGATT_INCL_SRVC     incl_service;  /* include service value */
+    tGATT_GROUP_VALUE   group_value;   /* Service UUID type.
+                                          This field is used with GATT_DISC_SRVC_ALL
+                                          type of discovery result callback. */
+
+    UINT16              handle;        /* When used with GATT_DISC_SRVC_BY_UUID type
+                                          discovery result, it is the ending handle of a
+                                          known service to be discovered. When used with
+                                          GATT_DISC_INC_SRVC type discovery result,
+                                          it is the included service starting handle.*/
+
+    tGATT_CHAR_DCLR_VAL dclr_value;    /* Characteristic declaration value.
+                                          This field is used with GATT_DISC_CHAR type discovery.*/
+} tGATT_DISC_VALUE;
+
+/* discover result record
+*/
+typedef struct
+{
+    tBT_UUID            type;
+    UINT16              handle;
+    tGATT_DISC_VALUE    value;
+} tGATT_DISC_RES;
+
+
+typedef UINT8 tGATT_IF;
+#define GATT_LINK_IDLE_TIMEOUT_WHEN_NO_APP    0 /* start a idle timer for this duration when no application
+                                              need to use the link */
+
+#define GATT_LINK_NO_IDLE_TIMEOUT            0xFFFF
+
+#define GATT_INVALID_ACL_HANDLE              0xFFFF
+/* discover result callback function */
+typedef void (tGATT_DISC_RES_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_DISC_RES *p_data);
+
+/* discover complete callback function */
+typedef void (tGATT_DISC_CMPL_CB) (UINT16 conn_id, tGATT_DISC_TYPE disc_type, tGATT_STATUS status);
+
+/* Define a callback function for when read/write/disc/config operation is completed. */
+typedef void (tGATT_CMPL_CBACK) (UINT16 conn_id, tGATTC_OPTYPE op, tGATT_STATUS status, tGATT_CL_COMPLETE *p_data);
+
+/* Define a callback function when an initialized connection is established. */
+typedef void (tGATT_CONN_CBACK) (tGATT_IF gatt_if, BD_ADDR bda, UINT16 conn_id, BOOLEAN connected, tGATT_DISCONN_REASON reason);
+
+/* attribute request callback for ATT server */
+typedef void  (tGATT_REQ_CBACK )(UINT16 conn_id, UINT32 trans_id, tGATTS_REQ_TYPE type, tGATTS_DATA *p_data);
+
+
+
+
+/* Define the structure that applications use to register with
+** GATT. This structure includes callback functions. All functions
+** MUST be provided.
+*/
+typedef struct
+{
+    tGATT_CONN_CBACK                *p_conn_cb;
+    tGATT_CMPL_CBACK                *p_cmpl_cb;
+    tGATT_DISC_RES_CB               *p_disc_res_cb;
+    tGATT_DISC_CMPL_CB              *p_disc_cmpl_cb;
+    tGATT_REQ_CBACK                 *p_req_cb;
+} tGATT_CBACK;
+
+/***********************  Start Handle Management Definitions   **********************
+*/
+
+
+typedef struct
+{
+    tBT_UUID app_uuid128;
+    tBT_UUID svc_uuid;
+    UINT16   svc_inst;
+    UINT16   s_handle;
+    UINT16   e_handle;
+    BOOLEAN  is_primary;      /* primary service or secondary */
+} tGATTS_HNDL_RANGE;
+
+
+
+#define GATTS_SRV_CHG_CMD_ADD_CLIENT       1
+#define GATTS_SRV_CHG_CMD_UPDATE_CLIENT    2
+#define GATTS_SRV_CHG_CMD_REMOVE_CLIENT    3
+#define GATTS_SRV_CHG_CMD_READ_NUM_CLENTS  4
+#define GATTS_SRV_CHG_CMD_READ_CLENT       5
+typedef UINT8 tGATTS_SRV_CHG_CMD;
+
+typedef struct
+{
+    BD_ADDR         bda;
+    BOOLEAN         srv_changed;
+} tGATTS_SRV_CHG;
+
+
+typedef union
+{
+    tGATTS_SRV_CHG  srv_chg;
+    UINT8           client_read_index; /* only used for sequential reading client srv chg info */
+} tGATTS_SRV_CHG_REQ;
+
+typedef union
+{
+    tGATTS_SRV_CHG srv_chg;
+    UINT8 num_clients;
+} tGATTS_SRV_CHG_RSP;
+
+
+
+typedef struct
+{
+    tGATTS_HNDL_RANGE   *p_new_srv_start;
+} tGATTS_PENDING_NEW_SRV_START;
+
+/* Attibute server handle ranges NV storage callback functions
+*/
+typedef void  (tGATTS_NV_SAVE_CBACK)(BOOLEAN is_saved, tGATTS_HNDL_RANGE *p_hndl_range);
+typedef BOOLEAN  (tGATTS_NV_SRV_CHG_CBACK)(tGATTS_SRV_CHG_CMD cmd, tGATTS_SRV_CHG_REQ *p_req, tGATTS_SRV_CHG_RSP *p_rsp);
+
+typedef struct
+{
+    tGATTS_NV_SAVE_CBACK       *p_nv_save_callback;
+    tGATTS_NV_SRV_CHG_CBACK    *p_srv_chg_callback;
+} tGATT_APPL_INFO;
+
+/*
+***********************  End Handle Management Definitions   **********************/
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         GATT_SetTraceLevel
+**
+** Description      This function sets the trace level.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+    GATT_API extern UINT8 GATT_SetTraceLevel (UINT8 new_level);
+
+
+/*******************************************************************************/
+/* GATT Profile API Functions */
+/*******************************************************************************/
+/* GATT Profile Server Functions */
+/*******************************************************************************/
+/*******************************************************************************
+**
+** Function         GATTS_AddHandleRange
+**
+** Description      This function add the allocated handles range for the specifed
+**                  application UUID, service UUID and service instance
+**
+** Parameter        p_hndl_range:   pointer to allocated handles information
+**
+** Returns          TRUE if handle range is added sucessfully; otherwise FALSE.
+**
+*******************************************************************************/
+
+    GATT_API extern BOOLEAN GATTS_AddHandleRange(tGATTS_HNDL_RANGE *p_hndl_range);
+
+/*******************************************************************************
+**
+** Function         GATTS_NVRegister
+**
+** Description      Application manager calls this function to register for
+**                  NV save callback function.  There can be one and only one
+**                  NV save callback function.
+**
+** Parameter        p_cb_info : callback informaiton
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN  GATTS_NVRegister (tGATT_APPL_INFO *p_cb_info);
+
+
+/*******************************************************************************
+**
+** Function         GATTS_CreateService
+**
+** Description      This function is called to reserve a block of handles for a service.
+**
+**                  *** It should be called only once per service instance  ***
+**
+** Parameter        gatt_if       : application if
+**                  p_svc_uuid    : service UUID
+**                  svc_inst      : instance of the service inside the application
+**                  num_handles   : number of handles needed by the service.
+**                  is_pri        : is a primary service or not.
+**
+** Returns          service handle if sucessful, otherwise 0.
+**
+*******************************************************************************/
+    GATT_API extern UINT16 GATTS_CreateService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid,
+                                                UINT16 svc_inst, UINT16 num_handles, BOOLEAN is_pri);
+
+
+/*******************************************************************************
+**
+** Function         GATTS_AddIncludeService
+**
+** Description      This function is called to add an included service.
+**
+** Parameter        service_handle : To which service this included service is added to.
+**                  include_svc_handle    : included service handle.
+**
+** Returns          included service attribute handle. If 0, add included service
+**                  fail.
+**
+*******************************************************************************/
+    GATT_API extern UINT16 GATTS_AddIncludeService (UINT16 service_handle,
+                                                    UINT16 include_svc_handle);
+
+
+/*******************************************************************************
+**
+** Function         GATTS_AddCharacteristic
+**
+** Description      This function is called to add a characteristic into a service.
+**                  It will add a characteristic declaration and characteristic
+**                  value declaration into the service database identified by the
+**                  service handle.
+**
+** Parameter        service_handle : To which service this included service is added to.
+**                  char_uuid : Characteristic UUID.
+**                  perm      : Characteristic value declaration attribute permission.
+**                  property  : Characteristic Properties
+**
+** Returns          Characteristic value declaration attribute handle. 0 if add
+**                  characteristic failed.
+**
+*******************************************************************************/
+    GATT_API extern UINT16 GATTS_AddCharacteristic (UINT16 service_handle, tBT_UUID *char_uuid,
+                                                    tGATT_PERM perm,tGATT_CHAR_PROP property);
+
+/*******************************************************************************
+**
+** Function         GATTS_AddCharDescriptor
+**
+** Description      This function is called to add a characteristic descriptor
+**                  into a service database. Add descriptor should follow add char
+**                  to which it belongs, and next add char should be done only
+**                  after all add descriptors for the previous char.
+**
+** Parameter        service_handle  : To which service this characteristic descriptor
+**                                    is added to.
+**                  perm            : Characteristic value declaration attribute
+**                                    permission.
+**                  p_descr_uuid    : Characteristic descriptor UUID.
+**
+** Returns         Characteristic descriptor attribute handle. 0 if add
+**                 characteristic descriptor failed.
+**
+*******************************************************************************/
+    GATT_API extern UINT16 GATTS_AddCharDescriptor (UINT16 service_handle, tGATT_PERM perm,
+                                                     tBT_UUID * p_descr_uuid);
+
+/*******************************************************************************
+**
+** Function         GATTS_DeleteService
+**
+** Description      This function is called to delete a service.
+**
+** Parameter        gatt_if       : application interface
+**                  p_svc_uuid    : service UUID
+**                  svc_inst      : instance of the service inside the application
+**
+** Returns          TRUE if operation succeed, FALSE if handle block was not found.
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN GATTS_DeleteService (tGATT_IF gatt_if, tBT_UUID *p_svc_uuid, UINT16 svc_inst);
+
+/*******************************************************************************
+**
+** Function         GATTS_StartService
+**
+** Description      This function is called to start a service with GATT
+**
+** Parameter        gatt_if : service handle.
+**                  p_cback       : application service callback functions.
+**                  sup_transport : supported transport(s) for this primary service
+**
+** return           GATT_SUCCESS if sucessfully started; otherwise error code.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTS_StartService (tGATT_IF gatt_if, UINT16 service_handle,
+                                                     tGATT_TRANSPORT sup_transport);
+
+
+/*******************************************************************************
+**
+** Function         GATTS_StopService
+**
+** Description      This function is called to stop a service
+**
+** Parameter         service_handle : this is the start handle of a service
+**
+** Returns          None.
+**
+*******************************************************************************/
+    GATT_API extern void GATTS_StopService (UINT16 service_handle);
+
+
+/*******************************************************************************
+**
+** Function         GATTs_HandleValueIndication
+**
+** Description      This function sends a handle value indication to a client.
+**
+** Parameter        conn_id: connection identifier.
+**                  attr_handle: Attribute handle of this handle value indication.
+**                  val_len: Length of the indicated attribute value.
+**                  p_val: Pointer to the indicated attribute value data.
+**
+** Returns          GATT_SUCCESS if sucessfully sent or queued; otherwise error code.
+**
+*******************************************************************************/
+    GATT_API extern  tGATT_STATUS GATTS_HandleValueIndication (UINT16 conn_id,
+                                                               UINT16 attr_handle,
+                                                               UINT16 val_len, UINT8 *p_val);
+
+/*******************************************************************************
+**
+** Function         GATTS_HandleValueNotification
+**
+** Description      This function sends a handle value notification to a client.
+**
+** Parameter       conn_id: connection identifier.
+**                  attr_handle: Attribute handle of this handle value indication.
+**                  val_len: Length of the indicated attribute value.
+**                  p_val: Pointer to the indicated attribute value data.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+*******************************************************************************/
+    GATT_API extern  tGATT_STATUS GATTS_HandleValueNotification (UINT16 conn_id, UINT16 attr_handle,
+                                                                 UINT16 val_len, UINT8 *p_val);
+
+
+/*******************************************************************************
+**
+** Function         GATTS_SendRsp
+**
+** Description      This function sends the server response to client.
+**
+** Parameter        conn_id: connection identifier.
+**                  trans_id: transaction id
+**                  status: response status
+**                  p_msg: pointer to message parameters structure.
+**
+** Returns          GATT_SUCCESS if sucessfully sent; otherwise error code.
+**
+*******************************************************************************/
+    GATT_API extern  tGATT_STATUS GATTS_SendRsp (UINT16 conn_id,  UINT32 trans_id,
+                                                 tGATT_STATUS status, tGATTS_RSP *p_msg);
+
+
+/*******************************************************************************/
+/* GATT Profile Client Functions */
+/*******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         GATTC_ConfigureMTU
+**
+** Description      This function is called to configure the ATT MTU size for
+**                  a connection on an LE transport.
+**
+** Parameters       conn_id: connection identifier.
+**                  mtu    - attribute MTU size..
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_ConfigureMTU (UINT16 conn_id, UINT16  mtu);
+
+/*******************************************************************************
+**
+** Function         GATTC_Discover
+**
+** Description      This function is called to do a discovery procedure on ATT server.
+**
+** Parameters       conn_id: connection identifier.
+**                  disc_type:discovery type.
+**                  p_param: parameters of discovery requirement.
+**
+** Returns          GATT_SUCCESS if command received/sent successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_Discover (UINT16 conn_id,
+                                                 tGATT_DISC_TYPE disc_type,
+                                                 tGATT_DISC_PARAM *p_param );
+/*******************************************************************************
+**
+** Function         GATTC_Read
+**
+** Description      This function is called to read the value of an attribute from
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  type    - attribute read type.
+**                  p_read  - read operation parameters.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_Read (UINT16 conn_id, tGATT_READ_TYPE type,
+                                             tGATT_READ_PARAM *p_read);
+
+/*******************************************************************************
+**
+** Function         GATTC_Write
+**
+** Description      This function is called to read the value of an attribute from
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  type    - attribute write type.
+**                  p_write  - write operation parameters.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_Write (UINT16 conn_id, tGATT_WRITE_TYPE type,
+                                              tGATT_VALUE *p_write);
+
+
+/*******************************************************************************
+**
+** Function         GATTC_ExecuteWrite
+**
+** Description      This function is called to send an Execute write request to
+**                  the server.
+**
+** Parameters       conn_id: connection identifier.
+**                  is_execute - to execute or cancel the prepare write requet(s)
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_ExecuteWrite (UINT16 conn_id, BOOLEAN is_execute);
+
+/*******************************************************************************
+**
+** Function         GATTC_SendHandleValueConfirm
+**
+** Description      This function is called to send a handle value confirmation
+**                  as response to a handle value notification from server.
+**
+** Parameters       conn_id: connection identifier.
+**                  handle: the handle of the attribute confirmation.
+**
+** Returns          GATT_SUCCESS if command started successfully.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATTC_SendHandleValueConfirm (UINT16 conn_id, UINT16 handle);
+
+
+/*******************************************************************************
+**
+** Function         GATT_SetIdleTimeout
+**
+** Description      This function (common to both client and server) sets the idle
+**                  timeout for a tansport connection
+**
+** Parameter        bd_addr:   target device bd address.
+**                  idle_tout: timeout value in seconds.
+**
+** Returns          void
+**
+*******************************************************************************/
+    GATT_API extern void GATT_SetIdleTimeout (BD_ADDR bd_addr, UINT16 idle_tout);
+
+
+/*******************************************************************************
+**
+** Function         GATT_Register
+**
+** Description      This function is called to register an  application
+**                  with GATT
+**
+** Parameter        p_app_uuid128: Application UUID
+**                  p_cb_info: callback functions.
+**
+** Returns          0 for error, otherwise the index of the client registered with GATT
+**
+*******************************************************************************/
+    GATT_API extern  tGATT_IF GATT_Register (tBT_UUID *p_app_uuid128, tGATT_CBACK *p_cb_info);
+
+/*******************************************************************************
+**
+** Function         GATT_Deregister
+**
+** Description      This function deregistered the application from GATT.
+**
+** Parameters       gatt_if: applicaiton interface.
+**
+** Returns          None.
+**
+*******************************************************************************/
+    GATT_API extern void GATT_Deregister (tGATT_IF gatt_if);
+
+/*******************************************************************************
+**
+** Function         GATT_StartIf
+**
+** Description      This function is called after registration to start receiving
+**                  callbacks for registered interface.  Function may call back
+**                  with connection status and queued notifications
+**
+** Parameter        gatt_if: applicaiton interface.
+**
+** Returns          None
+**
+*******************************************************************************/
+    GATT_API extern  void GATT_StartIf (tGATT_IF gatt_if);
+
+/*******************************************************************************
+**
+** Function         GATT_Connect
+**
+** Description      This function initiate a connecttion to a ATT server.
+**
+** Parameters       gatt_if: applicaiton interface
+**                  bd_addr: peer device address.
+**                  is_direct: is a direct conenection or a background auto connection
+**
+** Returns          TRUE if connection started; FALSE if connection start failure.
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN GATT_Connect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct);
+
+
+/*******************************************************************************
+**
+** Function         GATT_CancelConnect
+**
+** Description      This function initiate a cancel connecttion to a ATT server.
+**
+** Parameters       gatt_if: client interface. If 0 used as unconditionally disconnect,
+**                          typically used for direct connection cancellation.
+**                  bd_addr: peer device address.
+**                  is_direct: is a direct conenection or a background auto connection
+**
+** Returns          TRUE if connection started; FALSE if connection start failure.
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN GATT_CancelConnect (tGATT_IF gatt_if, BD_ADDR bd_addr, BOOLEAN is_direct);
+
+/*******************************************************************************
+**
+** Function         GATT_Disconnect
+**
+** Description      This function disconnect a logic channel.
+**
+** Parameters       conn_id: connection identifier.
+**
+** Returns          GATT_SUCCESS if disconnected.
+**
+*******************************************************************************/
+    GATT_API extern tGATT_STATUS GATT_Disconnect (UINT16 conn_id);
+
+
+
+/*******************************************************************************
+**
+** Function         GATT_GetConnectionInfor
+**
+** Description      This function use conn_id to find its associated BD address and applciation
+**                  interface
+**
+** Parameters        conn_id: connection id  (input)
+**                   p_gatt_if: applicaiton interface (output)
+**                   bd_addr: peer device address. (output)
+**
+** Returns          TRUE the ligical link information is found for conn_id
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN GATT_GetConnectionInfor(UINT16 conn_id, tGATT_IF *p_gatt_if, BD_ADDR bd_addr);
+
+
+/*******************************************************************************
+**
+** Function         GATT_GetConnIdIfConnected
+**
+** Description      This function find the conn_id if the logical link for BD address
+**                  and applciation interface is connected
+**
+** Parameters        gatt_if: applicaiton interface (input)
+**                   bd_addr: peer device address. (input)
+**                   p_conn_id: connection id  (output)
+**
+** Returns          TRUE the ligical link is connected
+**
+*******************************************************************************/
+    GATT_API extern BOOLEAN GATT_GetConnIdIfConnected(tGATT_IF gatt_if, BD_ADDR bd_addr, UINT16 *p_conn_id);
+
+#ifdef __cplusplus
+
+}
+#endif
+
+#endif  /* GATT_API_H */
diff --git a/stack/include/gattdefs.h b/stack/include/gattdefs.h
new file mode 100644
index 0000000..6eac0f4
--- /dev/null
+++ b/stack/include/gattdefs.h
@@ -0,0 +1,109 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains internally used ATT definitions
+ *
+ ******************************************************************************/
+
+#ifndef  _GATTDEFS_H
+#define  _GATTDEFS_H
+
+#define GATT_ILLEGAL_UUID            0
+
+/* GATT attribute types
+*/
+#define GATT_UUID_PRI_SERVICE           0x2800
+#define GATT_UUID_SEC_SERVICE           0x2801
+#define GATT_UUID_INCLUDE_SERVICE       0x2802
+#define GATT_UUID_CHAR_DECLARE          0x2803      /*  Characteristic Declaration*/
+
+#define GATT_UUID_CHAR_EXT_PROP         0x2900      /*	Characteristic Extended Properties */
+#define GATT_UUID_CHAR_DESCRIPTION      0x2901      /*  Characteristic User Description*/
+#define GATT_UUID_CHAR_CLIENT_CONFIG    0x2902      /*  Client Characteristic Configuration */
+#define GATT_UUID_CHAR_SRVR_CONFIG      0x2903      /*  Server Characteristic Configuration */
+#define GATT_UUID_CHAR_PRESENT_FORMAT   0x2904      /*  Characteristic Presentation Format*/
+#define GATT_UUID_CHAR_AGG_FORMAT       0x2905      /*  Characteristic Aggregate Format*/
+#define GATT_UUID_CHAR_VALID_RANGE       0x2906      /*  Characteristic Valid Range */
+#define GATT_UUID_EXT_RPT_REF_DESCR     0x2907
+#define GATT_UUID_RPT_REF_DESCR         0x2908
+
+
+/* GAP Profile Attributes
+*/
+#define GATT_UUID_GAP_DEVICE_NAME       0x2A00
+#define GATT_UUID_GAP_ICON              0x2A01
+#define GATT_UUID_GAP_PRIVACY_FLAG      0x2A02
+#define GATT_UUID_GAP_RECONN_ADDR       0x2A03
+#define GATT_UUID_GAP_PREF_CONN_PARAM   0x2A04
+
+/* Attribute Profile Attribute UUID */
+#define GATT_UUID_GATT_SRV_CHGD         0x2A05
+/* Attribute Protocol Test */
+
+/* Link Loss Service */
+#define GATT_UUID_ALERT_LEVEL           0x2A06      /* Alert Level */
+#define GATT_UUID_TX_POWER_LEVEL        0x2A07      /* TX power level */
+
+/* Time Profile */
+/* Current Time Service */
+#define GATT_UUID_CURRENT_TIME          0x2A2B      /* Current Time */
+#define GATT_UUID_LOCAL_TIME_INFO       0x2A0F      /* Local time info */
+#define GATT_UUID_REF_TIME_INFO         0x2A14      /* reference time information */
+
+/* NwA Profile */
+#define GATT_UUID_NW_STATUS             0x2A18      /* network availability status */
+#define GATT_UUID_NW_TRIGGER            0x2A1A      /* Network availability trigger */
+
+/* phone alert */
+#define GATT_UUID_ALERT_STATUS          0x2A40     /* alert status */
+#define GATT_UUID_RINGER_CP             0x2A42     /* ringer control point */
+#define GATT_UUID_RINGER_SETTING        0x2A41     /* ringer setting */
+
+/* Glucose Service */
+#define GATT_UUID_GM_MEASUREMENT        0x2A18
+#define GATT_UUID_GM_CONTEXT            0x2A34
+#define GATT_UUID_GM_CONTROL_POINT      0x2A52
+#define GATT_UUID_GM_FEATURE            0x2A51
+
+/* device infor characteristic */
+#define GATT_UUID_SYSTEM_ID             0x2A23
+#define GATT_UUID_MODEL_NUMBER_STR      0x2A24
+#define GATT_UUID_SERIAL_NUMBER_STR     0x2A25
+#define GATT_UUID_FW_VERSION_STR        0x2A26
+#define GATT_UUID_HW_VERSION_STR        0x2A27
+#define GATT_UUID_SW_VERSION_STR        0x2A28
+#define GATT_UUID_MANU_NAME             0x2A29
+#define GATT_UUID_IEEE_DATA             0x2A2A
+#define GATT_UUID_PNP_ID                0x2A50
+
+/* HID characteristics */
+#define GATT_UUID_HID_INFORMATION       0x2A4A
+#define GATT_UUID_HID_REPORT_MAP        0x2A4B
+#define GATT_UUID_HID_CONTROL_POINT     0x2A4C
+#define GATT_UUID_HID_REPORT            0x2A4D
+#define GATT_UUID_HID_PROTO_MODE        0x2A4E
+#define GATT_UUID_HID_BT_KB_INPUT       0x2A22
+#define GATT_UUID_HID_BT_KB_OUTPUT      0x2A32
+#define GATT_UUID_HID_BT_MOUSE_INPUT    0x2A33
+
+/* Battery Service char */
+#define GATT_UUID_BATTERY_LEVEL         0x2A19
+
+#endif
diff --git a/stack/include/goep_fs.h b/stack/include/goep_fs.h
new file mode 100644
index 0000000..c5d054e
--- /dev/null
+++ b/stack/include/goep_fs.h
@@ -0,0 +1,393 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2000-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef GOEP_FS_H
+#define GOEP_FS_H
+
+#include "bt_target.h"
+
+/*****************************************************************************
+**     Constants
+*****************************************************************************/
+
+/* Flags passed to the open function (tGOEP_OPEN_CBACK)
+**      Values are OR'd together. (First 3 are
+**      mutually exclusive.
+*/
+#define GOEP_O_RDONLY            0x0000
+#define GOEP_O_WRONLY            0x0001
+#define GOEP_O_RDWR              0x0002
+
+#define GOEP_O_CREAT             0x0100
+#define GOEP_O_EXCL              0x0200
+#define GOEP_O_TRUNC             0x1000
+
+
+#define GOEP_LEN_UNKNOWN          0xFFFFFFFF
+#define GOEP_INVALID_FD          (-1)
+
+/* Values passed to the access function (tGOEP_ACCESS_CBACK)
+*/
+#define GOEP_ACC_EXIST           0x0
+#define GOEP_ACC_READ            0x4
+#define GOEP_ACC_RDWR            0x6
+
+/* Constants used in directory listing structure */
+#define GOEP_A_RDONLY            0x1
+#define GOEP_A_DIR               0x2      /* Entry is a sub directory */
+
+#define GOEP_CTIME_LEN           17       /* Creation time "yyyymmddTHHMMSSZ" */
+
+/*****************************************************************************
+**     Seek Constants
+*****************************************************************************/
+/* Origin for the seek function (tGOEP_SEEK_CBACK) */
+#define GOEP_SEEK_SET    0
+#define GOEP_SEEK_CUR    1
+#define GOEP_SEEK_END    2
+
+
+
+/*****************************************************************************
+**    Typedefs
+*****************************************************************************/
+typedef INT32   tGOEP_FD;
+
+enum
+{
+    GOEP_OK,
+    GOEP_FAIL,
+    GOEP_EACCES,
+    GOEP_ENOTEMPTY,
+    GOEP_EOF,
+    GOEP_EODIR,
+    GOEP_ENOSPACE,
+    GOEP_EIS_DIR,
+    GOEP_RESUME,
+    GOEP_NONE
+};
+typedef UINT16 tGOEP_STATUS;
+
+/* Structure passed in Directory Entry Callback to be filled in */
+typedef struct
+{
+    UINT32  refdata;                /* holder for OS specific data used to get next entry */
+    UINT32  filesize;
+    char    crtime[GOEP_CTIME_LEN]; /* "yyyymmddTHHMMSSZ", or "" if none */
+    char   *p_name;                 /* Contains the addr of memory to copy name into */
+    UINT8   mode;                   /* GOEP_A_RDONLY and/or GOEP_A_DIR */
+} tGOEP_DIRENTRY;
+
+
+/*****************************************************************************
+**    Typedefs for messages from response functions
+*****************************************************************************/
+typedef struct
+{
+    BT_HDR          hdr;
+    tGOEP_FD        fd;
+    tGOEP_STATUS    status;
+    UINT32          file_size;
+} tGOEP_OPEN_RSP;
+
+typedef struct
+{
+    BT_HDR          hdr;
+    tGOEP_FD        fd;
+    tGOEP_STATUS    status;
+    UINT16          bytes_read;
+} tGOEP_READ_RSP;
+
+typedef struct
+{
+    BT_HDR          hdr;
+    tGOEP_FD        fd;
+    tGOEP_STATUS    status;
+} tGOEP_WRITE_RSP;
+
+typedef struct
+{
+    BT_HDR       hdr;
+    tGOEP_STATUS status;
+} tGOEP_DIRENTRY_RSP;
+
+/*****************************************************************************
+**    Object Store Interface
+*****************************************************************************/
+/*******************************************************************************
+**
+** Callback Function: tGOEP_OPEN_CBACK
+**
+** Description  This function is executed by OBX profiles to open
+**              a file for reading or writing.
+**
+** Parameters   p_path      - Fully qualified path and file name.
+**              flags       - permissions and mode (see constants above)
+**              size        - size of file to put (0 if unavailable or not applicable)
+**              event_id    - code that must be passed to the call-in function.
+**
+** Returns      void
+**
+** Note:        Upon completion of the request, a file descriptor (tGOEP_FD),
+**              file size (UINT32), and an status code (tGOEP_STATUS)
+**              are returned in GOEP_OpenRsp().
+**
+*******************************************************************************/
+typedef void (tGOEP_OPEN_CBACK) (const UINT8 *p_name, UINT16 flags, UINT32 size,
+                                 UINT16 event_id, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_CLOSE_CBACK
+**
+** Description  This function is executed by OBX profiles when the file descriptor
+**              is no longer in use.
+**
+** Returns      void
+**
+*******************************************************************************/
+typedef void (tGOEP_CLOSE_CBACK) (tGOEP_FD fd, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_READ_CBACK
+**
+** Description  This function is executed by OBX profiles to read in data from the
+**              previously opened file.
+**
+** Returns      void
+**
+** Note:        Upon completion of the request, GOEP_ReadRsp() is
+**              called with the buffer of data, along with the number
+**              of bytes read into the buffer, and a status.  The
+**              call-in function should only be called when ALL requested
+**              bytes have been read, the end of file has been detected,
+**              or an error has occurred.
+**
+*******************************************************************************/
+typedef void (tGOEP_READ_CBACK) (tGOEP_FD fd, void *p_data, INT16 size,
+                                 UINT16 event_id, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_WRITE_CBACK
+**
+** Description  This function is executed by OBX profiles to write the data to the
+**              previously opened file.
+**
+** Returns      void
+**
+** Note:        Upon completion of the request, GOEP_WriteRsp() is
+**              called with the file descriptor and the status.  The
+**              call-in function should only be called when ALL requested
+**              bytes have been written, or an error has been detected,
+**
+*******************************************************************************/
+typedef void (tGOEP_WRITE_CBACK) (tGOEP_FD fd, const void *p_data, INT16 size,
+                                  UINT16 event_id, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_SEEK_CBACK
+**
+** Description  This function is executed by OBX profiles to Move a file pointer
+**              of a previously opened file to the specified location for the
+**              next read or write operation.
+**
+** Returns      void
+**
+*******************************************************************************/
+typedef void (tGOEP_SEEK_CBACK) (tGOEP_FD fd, INT32 offset, INT16 origin, UINT8 app_id);
+
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_DIRENTRY_CBACK
+**
+** Description  This function is called to retrieve a directory entry for the
+**              specified path.  The first/next directory should be filled
+**              into the location specified by p_entry.
+**
+** Parameters   p_path     - directory to search (Fully qualified path)
+**              first_item - TRUE if first search, FALSE if next search
+**                                      (p_cur contains previous)
+**              p_entry (input/output) - Points to last entry data (valid when
+**                                           first_item is FALSE)
+**              event_id - event that must be passed into the call-in function.
+**
+** Returns      void
+**
+** Note:        Upon completion of the request, GOEP_DirentryRsp() is
+**              filled in entry and the status.
+**              GOEP_OK is returned when p_entry is valid,
+**              GOEP_EODIR is returned when no more entries [finished]
+**              GOEP_FAIL is returned if an error occurred
+**
+*******************************************************************************/
+typedef void (tGOEP_DIRENTRY_CBACK) (const char *p_path, BOOLEAN first_item,
+                                     tGOEP_DIRENTRY *p_entry, UINT16 event_id,
+                                     UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_ACCESS_CBACK
+**
+** Description  This function is called to check the existence of a file or
+**              directory.
+**
+** Returns      (tGOEP_STATUS) status of the call.
+**               [GOEP_OK if it exists]
+**               [GOEP_EACCES if permissions are wrong]
+**               [GOEP_FAIL if it does not exist]
+**
+*******************************************************************************/
+typedef tGOEP_STATUS (tGOEP_ACCESS_CBACK) (const char *p_path, UINT16 mode,
+                                           BOOLEAN *p_is_dir, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_MKDIR_CBACK
+**
+** Description  This function is called to create a directory with
+**              the pathname given by path. The pathname is a null terminated
+**              string. All components of the path must already exist.
+**
+** Parameters   p_path   - (input) name of directory to create (fully qualified path).
+**
+** Returns      (tGOEP_STATUS) status of the call.
+**               [GOEP_OK if successful]
+**               [GOEP_FAIL if unsuccessful]
+**
+*******************************************************************************/
+typedef tGOEP_STATUS (tGOEP_MKDIR_CBACK) (const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_RMDIR_CBACK
+**
+** Description  This function is called to remove a directory whose
+**                  name is given by path. The directory must be empty.
+**
+** Parameters   p_path   - (input) name of directory to remove (fully qualified path).
+**
+** Returns      (tGOEP_STATUS) status of the call.
+**               [GOEP_OK if successful]
+**               [GOEP_EACCES if read-only]
+**               [GOEP_ENOTEMPTY if directory is not empty]
+**               [GOEP_FAIL otherwise]
+**
+*******************************************************************************/
+typedef tGOEP_STATUS (tGOEP_RMDIR_CBACK) (const char *p_path, UINT8 app_id);
+
+/*******************************************************************************
+**
+** Callback Function: tGOEP_UNLINK_CBACK
+**
+** Description  This function is called to remove a directory whose
+**                  name is given by path. The directory must be empty.
+**
+** Parameters   p_path   - (input) name of file to remove (fully qualified path).
+**
+** Returns      (tGOEP_STATUS) status of the call.
+**               [GOEP_OK if successful]
+**               [GOEP_EACCES if read-only]
+**               [GOEP_FAIL otherwise]
+**
+*******************************************************************************/
+typedef tGOEP_STATUS (tGOEP_UNLINK_CBACK) (const char *p_path, UINT8 app_id);
+
+
+/*****************************************************************************
+**     Prototypes
+*****************************************************************************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*****************************************************************************
+**
+**  Function:    GOEP_OpenRsp
+**
+**  Purpose:     Report the status of tGOEP_OPEN_CBACK callback function.
+**
+**  Parameters:  fd         - File handle.
+**               status     - Status of the operation.
+**               file_size  - total number of bytes in this file.
+**               event_id   - event id as given in the tGOEP_OPEN_CBACK function.
+**
+**  Returns:     void
+**
+*****************************************************************************/
+GOEP_API extern void GOEP_OpenRsp (tGOEP_FD fd, tGOEP_STATUS status,
+                                   UINT32 file_size, UINT16 event_id);
+
+/*****************************************************************************
+**
+**  Function:    GOEP_ReadRsp
+**
+**  Purpose:     Report the status of tGOEP_READ_CBACK callback function.
+**
+**  Parameters:  fd         - File handle.
+**               status     - Status of the operation.
+**               bytes_read - total number of bytes read from the file.
+**               event_id   - event id as given in the tGOEP_READ_CBACK function.
+**
+**  Returns:     void
+**
+*****************************************************************************/
+GOEP_API extern void GOEP_ReadRsp (tGOEP_FD fd, tGOEP_STATUS status,
+                                   UINT16 bytes_read, UINT16 event_id);
+
+/*****************************************************************************
+**
+**  Function:    GOEP_WriteRsp
+**
+**  Purpose:     Report the status of tGOEP_WRITE_CBACK callback function.
+**
+**  Parameters:  fd         - File handle.
+**               status     - Status of the operation.
+**               event_id   - event id as given in the tGOEP_WRITE_CBACK function.
+**
+**  Returns:     void
+**
+*****************************************************************************/
+GOEP_API extern void GOEP_WriteRsp (tGOEP_FD fd, tGOEP_STATUS status, UINT16 event_id);
+
+/*******************************************************************************
+**
+** Function     GOEP_DirentryRsp
+**
+** Description  This function is called in response to the
+**              tGOEP_DIRENTRY_CBACK function with a filled in directory listing
+**              entry.
+**
+** Parameters   status - GOEP_OK if p_entry points to a valid entry.
+**                       GOEP_EODIR if no more entries (p_entry is ignored).
+**                       GOEP_FAIL if any errors have occurred.
+**              event_id - event id as given in the tGOEP_DIRENTRY_CBACK function.
+**
+** Returns      void
+**
+*******************************************************************************/
+GOEP_API extern void GOEP_DirentryRsp(tGOEP_STATUS status, UINT16 event_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GOEP_FS_H */
diff --git a/stack/include/hcidefs.h b/stack/include/hcidefs.h
new file mode 100644
index 0000000..1a0b3e8
--- /dev/null
+++ b/stack/include/hcidefs.h
@@ -0,0 +1,2233 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef HCIDEFS_H
+#define HCIDEFS_H
+
+#ifdef BRCM_VS
+#include "brcm_vs_include.h"
+#endif
+
+#define HCI_PROTO_VERSION     0x01      /* Version for BT spec 1.1          */
+#define HCI_PROTO_VERSION_1_2 0x02      /* Version for BT spec 1.2          */
+#define HCI_PROTO_VERSION_2_0 0x03      /* Version for BT spec 2.0          */
+#define HCI_PROTO_VERSION_2_1 0x04      /* Version for BT spec 2.1 [Lisbon] */
+#define HCI_PROTO_VERSION_3_0 0x05      /* Version for BT spec 3.0          */
+#define HCI_PROTO_REVISION    0x000C    /* Current implementation version   */
+/*
+**  Definitions for HCI groups
+*/
+#define HCI_GRP_LINK_CONTROL_CMDS       (0x01 << 10)            /* 0x0400 */
+#define HCI_GRP_LINK_POLICY_CMDS        (0x02 << 10)            /* 0x0800 */
+#define HCI_GRP_HOST_CONT_BASEBAND_CMDS (0x03 << 10)            /* 0x0C00 */
+#define HCI_GRP_INFORMATIONAL_PARAMS    (0x04 << 10)            /* 0x1000 */
+#define HCI_GRP_STATUS_PARAMS           (0x05 << 10)            /* 0x1400 */
+#define HCI_GRP_TESTING_CMDS            (0x06 << 10)            /* 0x1800 */
+
+#define HCI_GRP_VENDOR_SPECIFIC         (0x3F << 10)            /* 0xFC00 */
+
+/* Group occupies high 6 bits of the HCI command rest is opcode itself */
+#define HCI_OGF(p)  (UINT8)((0xFC00 & (p)) >> 10)
+#define HCI_OCF(p)  ( 0x3FF & (p))
+
+/*
+**  Defentions for Link Control Commands
+*/
+/* Following opcode is used only in command complete event for flow control */
+#define HCI_COMMAND_NONE                0x0000
+
+/* Commands of HCI_GRP_LINK_CONTROL_CMDS group */
+#define HCI_INQUIRY                     (0x0001 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_INQUIRY_CANCEL              (0x0002 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_PERIODIC_INQUIRY_MODE       (0x0003 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_EXIT_PERIODIC_INQUIRY_MODE  (0x0004 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_CREATE_CONNECTION           (0x0005 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_DISCONNECT                  (0x0006 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_ADD_SCO_CONNECTION          (0x0007 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_CREATE_CONNECTION_CANCEL    (0x0008 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_ACCEPT_CONNECTION_REQUEST   (0x0009 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_REJECT_CONNECTION_REQUEST   (0x000A | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_LINK_KEY_REQUEST_REPLY      (0x000B | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_LINK_KEY_REQUEST_NEG_REPLY  (0x000C | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_PIN_CODE_REQUEST_REPLY      (0x000D | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_PIN_CODE_REQUEST_NEG_REPLY  (0x000E | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_CHANGE_CONN_PACKET_TYPE     (0x000F | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_AUTHENTICATION_REQUESTED    (0x0011 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_SET_CONN_ENCRYPTION         (0x0013 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_CHANGE_CONN_LINK_KEY        (0x0015 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_MASTER_LINK_KEY             (0x0017 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_RMT_NAME_REQUEST            (0x0019 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_RMT_NAME_REQUEST_CANCEL     (0x001A | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_READ_RMT_FEATURES           (0x001B | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_READ_RMT_EXT_FEATURES       (0x001C | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_READ_RMT_VERSION_INFO       (0x001D | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_READ_RMT_CLOCK_OFFSET       (0x001F | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_READ_LMP_HANDLE             (0x0020 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_SETUP_ESCO_CONNECTION       (0x0028 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_ACCEPT_ESCO_CONNECTION      (0x0029 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_REJECT_ESCO_CONNECTION      (0x002A | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_IO_CAPABILITY_RESPONSE      (0x002B | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_USER_CONF_REQUEST_REPLY     (0x002C | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_USER_CONF_VALUE_NEG_REPLY   (0x002D | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_USER_PASSKEY_REQ_REPLY      (0x002E | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_USER_PASSKEY_REQ_NEG_REPLY  (0x002F | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_REM_OOB_DATA_REQ_REPLY      (0x0030 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_REM_OOB_DATA_REQ_NEG_REPLY  (0x0033 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_IO_CAP_REQ_NEG_REPLY        (0x0034 | HCI_GRP_LINK_CONTROL_CMDS)
+
+/* AMP HCI */
+#define HCI_CREATE_PHYSICAL_LINK        (0x0035 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_ACCEPT_PHYSICAL_LINK        (0x0036 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_DISCONNECT_PHYSICAL_LINK    (0x0037 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_CREATE_LOGICAL_LINK         (0x0038 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_ACCEPT_LOGICAL_LINK         (0x0039 | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_DISCONNECT_LOGICAL_LINK     (0x003A | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_LOGICAL_LINK_CANCEL         (0x003B | HCI_GRP_LINK_CONTROL_CMDS)
+#define HCI_FLOW_SPEC_MODIFY            (0x003C | HCI_GRP_LINK_CONTROL_CMDS)
+
+#define HCI_LINK_CTRL_CMDS_FIRST        HCI_INQUIRY
+#define HCI_LINK_CTRL_CMDS_LAST         HCI_FLOW_SPEC_MODIFY
+
+/* Commands of HCI_GRP_LINK_POLICY_CMDS */
+#define HCI_HOLD_MODE                   (0x0001 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_SNIFF_MODE                  (0x0003 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_EXIT_SNIFF_MODE             (0x0004 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_PARK_MODE                   (0x0005 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_EXIT_PARK_MODE              (0x0006 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_QOS_SETUP                   (0x0007 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_ROLE_DISCOVERY              (0x0009 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_SWITCH_ROLE                 (0x000B | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_READ_POLICY_SETTINGS        (0x000C | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_WRITE_POLICY_SETTINGS       (0x000D | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_READ_DEF_POLICY_SETTINGS    (0x000E | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_WRITE_DEF_POLICY_SETTINGS   (0x000F | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_FLOW_SPECIFICATION          (0x0010 | HCI_GRP_LINK_POLICY_CMDS)
+#define HCI_SNIFF_SUB_RATE              (0x0011 | HCI_GRP_LINK_POLICY_CMDS)
+
+#define HCI_LINK_POLICY_CMDS_FIRST      HCI_HOLD_MODE
+#define HCI_LINK_POLICY_CMDS_LAST       HCI_SNIFF_SUB_RATE
+
+
+/* Commands of HCI_GRP_HOST_CONT_BASEBAND_CMDS */
+#define HCI_SET_EVENT_MASK              (0x0001 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_RESET                       (0x0003 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SET_EVENT_FILTER            (0x0005 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_FLUSH                       (0x0008 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PIN_TYPE               (0x0009 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PIN_TYPE              (0x000A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_CREATE_NEW_UNIT_KEY         (0x000B | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_STORED_LINK_KEY        (0x000D | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_STORED_LINK_KEY       (0x0011 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_DELETE_STORED_LINK_KEY      (0x0012 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_CHANGE_LOCAL_NAME           (0x0013 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_LOCAL_NAME             (0x0014 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_CONN_ACCEPT_TOUT       (0x0015 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_CONN_ACCEPT_TOUT      (0x0016 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PAGE_TOUT              (0x0017 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PAGE_TOUT             (0x0018 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_SCAN_ENABLE            (0x0019 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_SCAN_ENABLE           (0x001A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PAGESCAN_CFG           (0x001B | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PAGESCAN_CFG          (0x001C | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_INQUIRYSCAN_CFG        (0x001D | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_INQUIRYSCAN_CFG       (0x001E | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_AUTHENTICATION_ENABLE  (0x001F | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_AUTHENTICATION_ENABLE (0x0020 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_ENCRYPTION_MODE        (0x0021 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_ENCRYPTION_MODE       (0x0022 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_CLASS_OF_DEVICE        (0x0023 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_CLASS_OF_DEVICE       (0x0024 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_VOICE_SETTINGS         (0x0025 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_VOICE_SETTINGS        (0x0026 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_AUTO_FLUSH_TOUT        (0x0027 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_AUTO_FLUSH_TOUT       (0x0028 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_NUM_BCAST_REXMITS      (0x0029 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_NUM_BCAST_REXMITS     (0x002A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_HOLD_MODE_ACTIVITY     (0x002B | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_HOLD_MODE_ACTIVITY    (0x002C | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_TRANSMIT_POWER_LEVEL   (0x002D | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_SCO_FLOW_CTRL_ENABLE   (0x002E | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_SCO_FLOW_CTRL_ENABLE  (0x002F | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SET_HC_TO_HOST_FLOW_CTRL    (0x0031 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_HOST_BUFFER_SIZE            (0x0033 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_HOST_NUM_PACKETS_DONE       (0x0035 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_LINK_SUPER_TOUT        (0x0036 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_LINK_SUPER_TOUT       (0x0037 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_NUM_SUPPORTED_IAC      (0x0038 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_CURRENT_IAC_LAP        (0x0039 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_CURRENT_IAC_LAP       (0x003A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PAGESCAN_PERIOD_MODE   (0x003B | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PAGESCAN_PERIOD_MODE  (0x003C | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PAGESCAN_MODE          (0x003D | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PAGESCAN_MODE         (0x003E | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SET_AFH_CHANNELS            (0x003F | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+
+#define HCI_READ_INQSCAN_TYPE           (0x0042 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_INQSCAN_TYPE          (0x0043 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_INQUIRY_MODE           (0x0044 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_INQUIRY_MODE          (0x0045 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_PAGESCAN_TYPE          (0x0046 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_PAGESCAN_TYPE         (0x0047 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_AFH_ASSESSMENT_MODE    (0x0048 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_AFH_ASSESSMENT_MODE   (0x0049 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_EXT_INQ_RESPONSE       (0x0051 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_EXT_INQ_RESPONSE      (0x0052 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_REFRESH_ENCRYPTION_KEY      (0x0053 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_SIMPLE_PAIRING_MODE    (0x0055 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_SIMPLE_PAIRING_MODE   (0x0056 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_LOCAL_OOB_DATA         (0x0057 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_INQ_TX_POWER_LEVEL     (0x0058 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_INQ_TX_POWER_LEVEL    (0x0059 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_ERRONEOUS_DATA_RPT     (0x005A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_ERRONEOUS_DATA_RPT    (0x005B | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_ENHANCED_FLUSH              (0x005F | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SEND_KEYPRESS_NOTIF         (0x0060 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+
+
+/* AMP HCI */
+#define HCI_READ_LOGICAL_LINK_ACCEPT_TIMEOUT  (0x0061 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT (0x0062 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SET_EVENT_MASK_PAGE_2             (0x0063 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_LOCATION_DATA                (0x0064 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_LOCATION_DATA               (0x0065 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_FLOW_CONTROL_MODE            (0x0066 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_FLOW_CONTROL_MODE           (0x0067 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_READ_BE_FLUSH_TOUT                (0x0069 | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_WRITE_BE_FLUSH_TOUT               (0x006A | HCI_GRP_HOST_CONT_BASEBAND_CMDS)
+#define HCI_SHORT_RANGE_MODE                  (0x006B | HCI_GRP_HOST_CONT_BASEBAND_CMDS) /* 802.11 only */
+
+#define HCI_CONT_BASEBAND_CMDS_FIRST    HCI_SET_EVENT_MASK
+#define HCI_CONT_BASEBAND_CMDS_LAST     HCI_SHORT_RANGE_MODE
+
+
+/* Commands of HCI_GRP_INFORMATIONAL_PARAMS group */
+#define HCI_READ_LOCAL_VERSION_INFO     (0x0001 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_LOCAL_SUPPORTED_CMDS   (0x0002 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_LOCAL_FEATURES         (0x0003 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_LOCAL_EXT_FEATURES     (0x0004 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_BUFFER_SIZE            (0x0005 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_COUNTRY_CODE           (0x0007 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_BD_ADDR                (0x0009 | HCI_GRP_INFORMATIONAL_PARAMS)
+#define HCI_READ_DATA_BLOCK_SIZE        (0x000A | HCI_GRP_INFORMATIONAL_PARAMS)
+
+#define HCI_INFORMATIONAL_CMDS_FIRST    HCI_READ_LOCAL_VERSION_INFO
+#define HCI_INFORMATIONAL_CMDS_LAST     HCI_READ_BD_ADDR
+
+
+/* Commands of HCI_GRP_STATUS_PARAMS group */
+#define HCI_READ_FAILED_CONTACT_COUNT   (0x0001 | HCI_GRP_STATUS_PARAMS)
+#define HCI_RESET_FAILED_CONTACT_COUNT  (0x0002 | HCI_GRP_STATUS_PARAMS)
+#define HCI_GET_LINK_QUALITY            (0x0003 | HCI_GRP_STATUS_PARAMS)
+#define HCI_READ_RSSI                   (0x0005 | HCI_GRP_STATUS_PARAMS)
+#define HCI_READ_AFH_CH_MAP             (0x0006 | HCI_GRP_STATUS_PARAMS)
+#define HCI_READ_CLOCK                  (0x0007 | HCI_GRP_STATUS_PARAMS)
+#define HCI_READ_ENCR_KEY_SIZE          (0x0008 | HCI_GRP_STATUS_PARAMS)
+
+/* AMP HCI */
+#define HCI_READ_LOCAL_AMP_INFO         (0x0009 | HCI_GRP_STATUS_PARAMS)
+#define HCI_READ_LOCAL_AMP_ASSOC        (0x000A | HCI_GRP_STATUS_PARAMS)
+#define HCI_WRITE_REMOTE_AMP_ASSOC      (0x000B | HCI_GRP_STATUS_PARAMS)
+
+#define HCI_STATUS_PARAMS_CMDS_FIRST    HCI_READ_FAILED_CONTACT_COUNT
+#define HCI_STATUS_PARAMS_CMDS_LAST     HCI_WRITE_REMOTE_AMP_ASSOC
+
+/* Commands of HCI_GRP_TESTING_CMDS group */
+#define HCI_READ_LOOPBACK_MODE          (0x0001 | HCI_GRP_TESTING_CMDS)
+#define HCI_WRITE_LOOPBACK_MODE         (0x0002 | HCI_GRP_TESTING_CMDS)
+#define HCI_ENABLE_DEV_UNDER_TEST_MODE  (0x0003 | HCI_GRP_TESTING_CMDS)
+#define HCI_WRITE_SIMP_PAIR_DEBUG_MODE  (0x0004 | HCI_GRP_TESTING_CMDS)
+
+/* AMP HCI */
+#define HCI_ENABLE_AMP_RCVR_REPORTS     (0x0007 | HCI_GRP_TESTING_CMDS)
+#define HCI_AMP_TEST_END                (0x0008 | HCI_GRP_TESTING_CMDS)
+#define HCI_AMP_TEST                    (0x0009 | HCI_GRP_TESTING_CMDS)
+
+#define HCI_TESTING_CMDS_FIRST          HCI_READ_LOOPBACK_MODE
+#define HCI_TESTING_CMDS_LAST           HCI_AMP_TEST
+
+#define HCI_VENDOR_CMDS_FIRST           0x0001
+#define HCI_VENDOR_CMDS_LAST            0xFFFF
+#define HCI_VSC_MULTI_AV_HANDLE         0x0AAA
+#define HCI_VSC_BURST_MODE_HANDLE       0x0BBB
+
+/* BLE HCI */
+#define HCI_GRP_BLE_CMDS                (0x08 << 10)
+/* Commands of BLE Controller setup and configuration */
+#define HCI_BLE_SET_EVENT_MASK          (0x0001 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_BUFFER_SIZE        (0x0002 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_LOCAL_SPT_FEAT     (0x0003 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_LOCAL_SPT_FEAT    (0x0004 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_RANDOM_ADDR       (0x0005 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_ADV_PARAMS        (0x0006 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_ADV_CHNL_TX_POWER  (0x0007 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_ADV_DATA          (0x0008 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_SCAN_RSP_DATA     (0x0009 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_ADV_ENABLE        (0x000A | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_SCAN_PARAMS       (0x000B | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_WRITE_SCAN_ENABLE       (0x000C | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_CREATE_LL_CONN          (0x000D | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_CREATE_CONN_CANCEL      (0x000E | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_WHITE_LIST_SIZE    (0x000F | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_CLEAR_WHITE_LIST        (0x0010 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_ADD_WHITE_LIST          (0x0011 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_REMOVE_WHITE_LIST       (0x0012 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_UPD_LL_CONN_PARAMS      (0x0013 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_SET_HOST_CHNL_CLASS     (0x0014 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_CHNL_MAP           (0x0015 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_REMOTE_FEAT        (0x0016 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_ENCRYPT                 (0x0017 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_RAND                    (0x0018 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_START_ENC               (0x0019 | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_LTK_REQ_REPLY           (0x001A | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_LTK_REQ_NEG_REPLY       (0x001B | HCI_GRP_BLE_CMDS)
+#define HCI_BLE_READ_SUPPORTED_STATES   (0x001C | HCI_GRP_BLE_CMDS)
+
+#define HCI_BLE_RESET                   (0x0020 | HCI_GRP_BLE_CMDS)
+
+/* LE supported states definition */
+#define HCI_LE_ADV_STATE          0x00000001
+#define HCI_LE_SCAN_STATE         0x00000002
+#define HCI_LE_INIT_STATE         0x00000004
+#define HCI_LE_CONN_SL_STATE      0x00000008
+#define HCI_LE_ADV_SCAN_STATE     0x00000010
+#define HCI_LE_ADV_INIT_STATE     0x00000020
+#define HCI_LE_ADV_MA_STATE       0x00000040
+#define HCI_LE_ADV_SL_STATE       0x00000080
+#define HCI_LE_SCAN_INIT_STATE    0x00000100
+#define HCI_LE_SCAN_MA_STATE      0x00000200
+#define HCI_LE_SCAN_SL_STATE      0x00000400
+#define HCI_LE_INIT_MA_STATE      0x00000800
+
+/*
+**  Definitions for HCI Events
+*/
+#define HCI_INQUIRY_COMP_EVT                0x01
+#define HCI_INQUIRY_RESULT_EVT              0x02
+#define HCI_CONNECTION_COMP_EVT             0x03
+#define HCI_CONNECTION_REQUEST_EVT          0x04
+#define HCI_DISCONNECTION_COMP_EVT          0x05
+#define HCI_AUTHENTICATION_COMP_EVT         0x06
+#define HCI_RMT_NAME_REQUEST_COMP_EVT       0x07
+#define HCI_ENCRYPTION_CHANGE_EVT           0x08
+#define HCI_CHANGE_CONN_LINK_KEY_EVT        0x09
+#define HCI_MASTER_LINK_KEY_COMP_EVT        0x0A
+#define HCI_READ_RMT_FEATURES_COMP_EVT      0x0B
+#define HCI_READ_RMT_VERSION_COMP_EVT       0x0C
+#define HCI_QOS_SETUP_COMP_EVT              0x0D
+#define HCI_COMMAND_COMPLETE_EVT            0x0E
+#define HCI_COMMAND_STATUS_EVT              0x0F
+#define HCI_HARDWARE_ERROR_EVT              0x10
+#define HCI_FLUSH_OCCURED_EVT               0x11
+#define HCI_ROLE_CHANGE_EVT                 0x12
+#define HCI_NUM_COMPL_DATA_PKTS_EVT         0x13
+#define HCI_MODE_CHANGE_EVT                 0x14
+#define HCI_RETURN_LINK_KEYS_EVT            0x15
+#define HCI_PIN_CODE_REQUEST_EVT            0x16
+#define HCI_LINK_KEY_REQUEST_EVT            0x17
+#define HCI_LINK_KEY_NOTIFICATION_EVT       0x18
+#define HCI_LOOPBACK_COMMAND_EVT            0x19
+#define HCI_DATA_BUF_OVERFLOW_EVT           0x1A
+#define HCI_MAX_SLOTS_CHANGED_EVT           0x1B
+#define HCI_READ_CLOCK_OFF_COMP_EVT         0x1C
+#define HCI_CONN_PKT_TYPE_CHANGE_EVT        0x1D
+#define HCI_QOS_VIOLATION_EVT               0x1E
+#define HCI_PAGE_SCAN_MODE_CHANGE_EVT       0x1F
+#define HCI_PAGE_SCAN_REP_MODE_CHNG_EVT     0x20
+#define HCI_FLOW_SPECIFICATION_COMP_EVT     0x21
+#define HCI_INQUIRY_RSSI_RESULT_EVT         0x22
+#define HCI_READ_RMT_EXT_FEATURES_COMP_EVT  0x23
+#define HCI_ESCO_CONNECTION_COMP_EVT        0x2C
+#define HCI_ESCO_CONNECTION_CHANGED_EVT     0x2D
+#define HCI_SNIFF_SUB_RATE_EVT              0x2E
+#define HCI_EXTENDED_INQUIRY_RESULT_EVT     0x2F
+#define HCI_ENCRYPTION_KEY_REFRESH_COMP_EVT 0x30
+#define HCI_IO_CAPABILITY_REQUEST_EVT       0x31
+#define HCI_IO_CAPABILITY_RESPONSE_EVT      0x32
+#define HCI_USER_CONFIRMATION_REQUEST_EVT   0x33
+#define HCI_USER_PASSKEY_REQUEST_EVT        0x34
+#define HCI_REMOTE_OOB_DATA_REQUEST_EVT     0x35
+#define HCI_SIMPLE_PAIRING_COMPLETE_EVT     0x36
+#define HCI_LINK_SUPER_TOUT_CHANGED_EVT     0x38
+#define HCI_ENHANCED_FLUSH_COMPLETE_EVT     0x39
+#define HCI_USER_PASSKEY_NOTIFY_EVT         0x3B
+#define HCI_KEYPRESS_NOTIFY_EVT             0x3C
+#define HCI_RMT_HOST_SUP_FEAT_NOTIFY_EVT    0x3D
+
+/*#define HCI_GENERIC_AMP_LINK_KEY_NOTIF_EVT  0x3E Removed from spec */
+#define HCI_PHYSICAL_LINK_COMP_EVT          0x40
+#define HCI_CHANNEL_SELECTED_EVT            0x41
+#define HCI_DISC_PHYSICAL_LINK_COMP_EVT     0x42
+#define HCI_PHY_LINK_LOSS_EARLY_WARNING_EVT 0x43
+#define HCI_PHY_LINK_RECOVERY_EVT           0x44
+#define HCI_LOGICAL_LINK_COMP_EVT           0x45
+#define HCI_DISC_LOGICAL_LINK_COMP_EVT      0x46
+#define HCI_FLOW_SPEC_MODIFY_COMP_EVT       0x47
+#define HCI_NUM_COMPL_DATA_BLOCKS_EVT       0x48
+#define HCI_SHORT_RANGE_MODE_COMPLETE_EVT   0x4C
+#define HCI_AMP_STATUS_CHANGE_EVT           0x4D
+
+/* ULP HCI Event */
+#define HCI_BLE_EVENT                   0x03E
+/* ULP Event sub code */
+#define HCI_BLE_CONN_COMPLETE_EVT           0x01
+#define HCI_BLE_ADV_PKT_RPT_EVT             0x02
+#define HCI_BLE_LL_CONN_PARAM_UPD_EVT       0x03
+#define HCI_BLE_READ_REMOTE_FEAT_CMPL_EVT   0x04
+#define HCI_BLE_LTK_REQ_EVT                 0x05
+
+#define HCI_EVENT_RSP_FIRST             HCI_INQUIRY_COMP_EVT
+#define HCI_EVENT_RSP_LAST              HCI_AMP_STATUS_CHANGE_EVT
+
+#define HCI_VENDOR_SPECIFIC_EVT         0xFF  /* Vendor specific events */
+#define HCI_NAP_TRACE_EVT               0xFF  /* was define 0xFE, 0xFD, change to 0xFF
+                                                 because conflict w/ TCI_EVT and per
+                                                 specification compliant */
+
+
+
+/*
+**  Defentions for HCI Error Codes that are past in the events
+*/
+#define HCI_SUCCESS                                     0x00
+#define HCI_PENDING                                     0x00
+#define HCI_ERR_ILLEGAL_COMMAND                         0x01
+#define HCI_ERR_NO_CONNECTION                           0x02
+#define HCI_ERR_HW_FAILURE                              0x03
+#define HCI_ERR_PAGE_TIMEOUT                            0x04
+#define HCI_ERR_AUTH_FAILURE                            0x05
+#define HCI_ERR_KEY_MISSING                             0x06
+#define HCI_ERR_MEMORY_FULL                             0x07
+#define HCI_ERR_CONNECTION_TOUT                         0x08
+#define HCI_ERR_MAX_NUM_OF_CONNECTIONS                  0x09
+#define HCI_ERR_MAX_NUM_OF_SCOS                         0x0A
+#define HCI_ERR_CONNECTION_EXISTS                       0x0B
+#define HCI_ERR_COMMAND_DISALLOWED                      0x0C
+#define HCI_ERR_HOST_REJECT_RESOURCES                   0x0D
+#define HCI_ERR_HOST_REJECT_SECURITY                    0x0E
+#define HCI_ERR_HOST_REJECT_DEVICE                      0x0F
+#define HCI_ERR_HOST_TIMEOUT                            0x10
+#define HCI_ERR_UNSUPPORTED_VALUE                       0x11
+#define HCI_ERR_ILLEGAL_PARAMETER_FMT                   0x12
+#define HCI_ERR_PEER_USER                               0x13
+#define HCI_ERR_PEER_LOW_RESOURCES                      0x14
+#define HCI_ERR_PEER_POWER_OFF                          0x15
+#define HCI_ERR_CONN_CAUSE_LOCAL_HOST                   0x16
+#define HCI_ERR_REPEATED_ATTEMPTS                       0x17
+#define HCI_ERR_PAIRING_NOT_ALLOWED                     0x18
+#define HCI_ERR_UNKNOWN_LMP_PDU                         0x19
+#define HCI_ERR_UNSUPPORTED_REM_FEATURE                 0x1A
+#define HCI_ERR_SCO_OFFSET_REJECTED                     0x1B
+#define HCI_ERR_SCO_INTERVAL_REJECTED                   0x1C
+#define HCI_ERR_SCO_AIR_MODE                            0x1D
+#define HCI_ERR_INVALID_LMP_PARAM                       0x1E
+#define HCI_ERR_UNSPECIFIED                             0x1F
+#define HCI_ERR_UNSUPPORTED_LMP_FEATURE                 0x20
+#define HCI_ERR_ROLE_CHANGE_NOT_ALLOWED                 0x21
+#define HCI_ERR_LMP_RESPONSE_TIMEOUT                    0x22
+#define HCI_ERR_LMP_ERR_TRANS_COLLISION                 0x23
+#define HCI_ERR_LMP_PDU_NOT_ALLOWED                     0x24
+#define HCI_ERR_ENCRY_MODE_NOT_ACCEPTABLE               0x25
+#define HCI_ERR_UNIT_KEY_USED                           0x26
+#define HCI_ERR_QOS_NOT_SUPPORTED                       0x27
+#define HCI_ERR_INSTANT_PASSED                          0x28
+#define HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED     0x29
+#define HCI_ERR_DIFF_TRANSACTION_COLLISION              0x2A
+#define HCI_ERR_UNDEFINED_0x2B                          0x2B
+#define HCI_ERR_QOS_UNACCEPTABLE_PARAM                  0x2C
+#define HCI_ERR_QOS_REJECTED                            0x2D
+#define HCI_ERR_CHAN_CLASSIF_NOT_SUPPORTED              0x2E
+#define HCI_ERR_INSUFFCIENT_SECURITY                    0x2F
+#define HCI_ERR_PARAM_OUT_OF_RANGE                      0x30
+#define HCI_ERR_UNDEFINED_0x31                          0x31
+#define HCI_ERR_ROLE_SWITCH_PENDING                     0x32
+#define HCI_ERR_UNDEFINED_0x33                          0x33
+#define HCI_ERR_RESERVED_SLOT_VIOLATION                 0x34
+#define HCI_ERR_ROLE_SWITCH_FAILED                      0x35
+#define HCI_ERR_INQ_RSP_DATA_TOO_LARGE                  0x36
+#define HCI_ERR_SIMPLE_PAIRING_NOT_SUPPORTED            0x37
+#define HCI_ERR_HOST_BUSY_PAIRING                       0x38
+#define HCI_ERR_REJ_NO_SUITABLE_CHANNEL                 0x39
+#define HCI_ERR_CONTROLLER_BUSY                         0x3A
+#define HCI_ERR_UNACCEPT_CONN_INTERVAL                  0x3B
+#define HCI_ERR_DIRECTED_ADVERTISING_TIMEOUT            0x3C
+#define HCI_ERR_CONN_TOUT_DUE_TO_MIC_FAILURE            0x3D
+#define HCI_ERR_CONN_FAILED_ESTABLISHMENT               0x3E
+#define HCI_ERR_MAC_CONNECTION_FAILED                   0x3F
+
+#define HCI_ERR_MAX_ERR                                 0x40
+
+#define HCI_HINT_TO_RECREATE_AMP_PHYS_LINK              0xFF
+
+/*
+** Definitions for HCI enable event
+*/
+#define HCI_INQUIRY_COMPLETE_EV(p)          (*((UINT32 *)(p)) & 0x00000001)
+#define HCI_INQUIRY_RESULT_EV(p)            (*((UINT32 *)(p)) & 0x00000002)
+#define HCI_CONNECTION_COMPLETE_EV(p)       (*((UINT32 *)(p)) & 0x00000004)
+#define HCI_CONNECTION_REQUEST_EV(p)        (*((UINT32 *)(p)) & 0x00000008)
+#define HCI_DISCONNECTION_COMPLETE_EV(p)    (*((UINT32 *)(p)) & 0x00000010)
+#define HCI_AUTHENTICATION_COMPLETE_EV(p)   (*((UINT32 *)(p)) & 0x00000020)
+#define HCI_RMT_NAME_REQUEST_COMPL_EV(p)    (*((UINT32 *)(p)) & 0x00000040)
+#define HCI_CHANGE_CONN_ENCRPT_ENABLE_EV(p) (*((UINT32 *)(p)) & 0x00000080)
+#define HCI_CHANGE_CONN_LINK_KEY_EV(p)      (*((UINT32 *)(p)) & 0x00000100)
+#define HCI_MASTER_LINK_KEY_COMPLETE_EV(p)  (*((UINT32 *)(p)) & 0x00000200)
+#define HCI_READ_RMT_FEATURES_COMPL_EV(p)   (*((UINT32 *)(p)) & 0x00000400)
+#define HCI_READ_RMT_VERSION_COMPL_EV(p)    (*((UINT32 *)(p)) & 0x00000800)
+#define HCI_QOS_SETUP_COMPLETE_EV(p)        (*((UINT32 *)(p)) & 0x00001000)
+#define HCI_COMMAND_COMPLETE_EV(p)          (*((UINT32 *)(p)) & 0x00002000)
+#define HCI_COMMAND_STATUS_EV(p)            (*((UINT32 *)(p)) & 0x00004000)
+#define HCI_HARDWARE_ERROR_EV(p)            (*((UINT32 *)(p)) & 0x00008000)
+#define HCI_FLASH_OCCURED_EV(p)             (*((UINT32 *)(p)) & 0x00010000)
+#define HCI_ROLE_CHANGE_EV(p)               (*((UINT32 *)(p)) & 0x00020000)
+#define HCI_NUM_COMPLETED_PKTS_EV(p)        (*((UINT32 *)(p)) & 0x00040000)
+#define HCI_MODE_CHANGE_EV(p)               (*((UINT32 *)(p)) & 0x00080000)
+#define HCI_RETURN_LINK_KEYS_EV(p)          (*((UINT32 *)(p)) & 0x00100000)
+#define HCI_PIN_CODE_REQUEST_EV(p)          (*((UINT32 *)(p)) & 0x00200000)
+#define HCI_LINK_KEY_REQUEST_EV(p)          (*((UINT32 *)(p)) & 0x00400000)
+#define HCI_LINK_KEY_NOTIFICATION_EV(p)     (*((UINT32 *)(p)) & 0x00800000)
+#define HCI_LOOPBACK_COMMAND_EV(p)          (*((UINT32 *)(p)) & 0x01000000)
+#define HCI_DATA_BUF_OVERFLOW_EV(p)         (*((UINT32 *)(p)) & 0x02000000)
+#define HCI_MAX_SLOTS_CHANGE_EV(p)          (*((UINT32 *)(p)) & 0x04000000)
+#define HCI_READ_CLOCK_OFFSET_COMP_EV(p)    (*((UINT32 *)(p)) & 0x08000000)
+#define HCI_CONN_PKT_TYPE_CHANGED_EV(p)     (*((UINT32 *)(p)) & 0x10000000)
+#define HCI_QOS_VIOLATION_EV(p)             (*((UINT32 *)(p)) & 0x20000000)
+#define HCI_PAGE_SCAN_MODE_CHANGED_EV(p)    (*((UINT32 *)(p)) & 0x40000000)
+#define HCI_PAGE_SCAN_REP_MODE_CHNG_EV(p)   (*((UINT32 *)(p)) & 0x80000000)
+
+/* the default event mask for 2.1+EDR (Lisbon) does not include Lisbon events */
+#define HCI_DEFAULT_EVENT_MASK_0            0xFFFFFFFF
+#define HCI_DEFAULT_EVENT_MASK_1            0x00001FFF
+
+/* the event mask for 2.0 + EDR and later (includes Lisbon events) */
+#define HCI_LISBON_EVENT_MASK_0             0xFFFFFFFF
+#define HCI_LISBON_EVENT_MASK_1             0x1DBFFFFF
+#define HCI_LISBON_EVENT_MASK               "\x0D\xBF\xFF\xFF\xFF\xFF\xFF\xFF"
+#define HCI_LISBON_EVENT_MASK_EXT           "\x1D\xBF\xFF\xFF\xFF\xFF\xFF\xFF"
+#define HCI_DUMO_EVENT_MASK_EXT             "\x3D\xBF\xFF\xFF\xFF\xFF\xFF\xFF"
+/*  0x00001FFF FFFFFFFF Default - no Lisbon events
+    0x00000800 00000000 Synchronous Connection Complete Event
+    0x00001000 00000000 Synchronous Connection Changed Event
+    0x00002000 00000000 Sniff Subrate Event
+    0x00004000 00000000 Extended Inquiry Result Event
+    0x00008000 00000000 Encryption Key Refresh Complete Event
+    0x00010000 00000000 IO Capability Request Event
+    0x00020000 00000000 IO Capability Response Event
+    0x00040000 00000000 User Confirmation Request Event
+    0x00080000 00000000 User Passkey Request Event
+    0x00100000 00000000 Remote OOB Data Request Event
+    0x00200000 00000000 Simple Pairing Complete Event
+    0x00400000 00000000 Generic AMP Link Key Notification Event
+    0x00800000 00000000 Link Supervision Timeout Changed Event
+    0x01000000 00000000 Enhanced Flush Complete Event
+    0x04000000 00000000 User Passkey Notification Event
+    0x08000000 00000000 Keypress Notification Event
+    0x10000000 00000000 Remote Host Supported Features Notification Event
+    0x20000000 00000000 LE Meta Event
+ */
+
+
+/* the event mask for AMP controllers */
+#define HCI_AMP_EVENT_MASK_3_0               "\x00\x00\x00\x00\x00\x00\x3F\xFF"
+
+/*  0x0000000000000000 No events specified (default)
+    0x0000000000000001 Physical Link Complete Event
+    0x0000000000000002 Channel Selected Event
+    0x0000000000000004 Disconnection Physical Link Event
+    0x0000000000000008 Physical Link Loss Early Warning Event
+    0x0000000000000010 Physical Link Recovery Event
+    0x0000000000000020 Logical Link Complete Event
+    0x0000000000000040 Disconnection Logical Link Complete Event
+    0x0000000000000080 Flow Spec Modify Complete Event
+    0x0000000000000100 Number of Completed Data Blocks Event
+    0x0000000000000200 AMP Start Test Event
+    0x0000000000000400 AMP Test End Event
+    0x0000000000000800 AMP Receiver Report Event
+    0x0000000000001000 Short Range Mode Change Complete Event
+    0x0000000000002000 AMP Status Change Event
+*/
+
+
+/*
+** Definitions for packet type masks (BT1.2 and BT2.0 definitions)
+*/
+#define HCI_PKT_TYPES_MASK_NO_2_DH1         0x0002
+#define HCI_PKT_TYPES_MASK_NO_3_DH1         0x0004
+#define HCI_PKT_TYPES_MASK_DM1              0x0008
+#define HCI_PKT_TYPES_MASK_DH1              0x0010
+#define HCI_PKT_TYPES_MASK_HV1              0x0020
+#define HCI_PKT_TYPES_MASK_HV2              0x0040
+#define HCI_PKT_TYPES_MASK_HV3              0x0080
+#define HCI_PKT_TYPES_MASK_NO_2_DH3         0x0100
+#define HCI_PKT_TYPES_MASK_NO_3_DH3         0x0200
+#define HCI_PKT_TYPES_MASK_DM3              0x0400
+#define HCI_PKT_TYPES_MASK_DH3              0x0800
+#define HCI_PKT_TYPES_MASK_NO_2_DH5         0x1000
+#define HCI_PKT_TYPES_MASK_NO_3_DH5         0x2000
+#define HCI_PKT_TYPES_MASK_DM5              0x4000
+#define HCI_PKT_TYPES_MASK_DH5              0x8000
+
+/* Packet type should be one of valid but at least one should be specified */
+#define HCI_VALID_SCO_PKT_TYPE(t) (((((t) & ~(HCI_PKT_TYPES_MASK_HV1       \
+                                           |  HCI_PKT_TYPES_MASK_HV2       \
+                                           |  HCI_PKT_TYPES_MASK_HV3)) == 0)) \
+                                    && ((t) != 0))
+
+
+
+
+
+/* Packet type should not be invalid and at least one should be specified */
+#define HCI_VALID_ACL_PKT_TYPE(t) (((((t) & ~(HCI_PKT_TYPES_MASK_DM1        \
+                                           |  HCI_PKT_TYPES_MASK_DH1        \
+                                           |  HCI_PKT_TYPES_MASK_DM3        \
+                                           |  HCI_PKT_TYPES_MASK_DH3        \
+                                           |  HCI_PKT_TYPES_MASK_DM5        \
+                                           |  HCI_PKT_TYPES_MASK_DH5        \
+                                           |  HCI_PKT_TYPES_MASK_NO_2_DH1   \
+                                           |  HCI_PKT_TYPES_MASK_NO_3_DH1   \
+                                           |  HCI_PKT_TYPES_MASK_NO_2_DH3   \
+                                           |  HCI_PKT_TYPES_MASK_NO_3_DH3   \
+                                           |  HCI_PKT_TYPES_MASK_NO_2_DH5   \
+                                           |  HCI_PKT_TYPES_MASK_NO_3_DH5  )) == 0)) \
+                                    && (((t) &  (HCI_PKT_TYPES_MASK_DM1        \
+                                              |  HCI_PKT_TYPES_MASK_DH1        \
+                                              |  HCI_PKT_TYPES_MASK_DM3        \
+                                              |  HCI_PKT_TYPES_MASK_DH3        \
+                                              |  HCI_PKT_TYPES_MASK_DM5        \
+                                              |  HCI_PKT_TYPES_MASK_DH5)) != 0))
+
+/*
+** Definitions for eSCO packet type masks (BT1.2 and BT2.0 definitions)
+*/
+#define HCI_ESCO_PKT_TYPES_MASK_HV1         0x0001
+#define HCI_ESCO_PKT_TYPES_MASK_HV2         0x0002
+#define HCI_ESCO_PKT_TYPES_MASK_HV3         0x0004
+#define HCI_ESCO_PKT_TYPES_MASK_EV3         0x0008
+#define HCI_ESCO_PKT_TYPES_MASK_EV4         0x0010
+#define HCI_ESCO_PKT_TYPES_MASK_EV5         0x0020
+#define HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3    0x0040
+#define HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3    0x0080
+#define HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5    0x0100
+#define HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5    0x0200
+
+/* Packet type should be one of valid but at least one should be specified for 1.2 */
+#define HCI_VALID_ESCO_PKT_TYPE(t) (((((t) & ~(HCI_ESCO_PKT_TYPES_MASK_EV3       \
+                                           |   HCI_ESCO_PKT_TYPES_MASK_EV4       \
+                                           |   HCI_ESCO_PKT_TYPES_MASK_EV5)) == 0)) \
+                                    && ((t) != 0))/* Packet type should be one of valid but at least one should be specified */
+
+#define HCI_VALID_ESCO_SCOPKT_TYPE(t) (((((t) & ~(HCI_ESCO_PKT_TYPES_MASK_HV1       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_HV2       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_HV3)) == 0)) \
+                                    && ((t) != 0))
+
+#define HCI_VALID_SCO_ALL_PKT_TYPE(t) (((((t) & ~(HCI_ESCO_PKT_TYPES_MASK_HV1       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_HV2       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_HV3       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_EV3       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_EV4       \
+                                           |      HCI_ESCO_PKT_TYPES_MASK_EV5)) == 0)) \
+                                    && ((t) != 0))
+
+/*
+** Define parameters to allow role switch during create connection
+*/
+#define HCI_CR_CONN_NOT_ALLOW_SWITCH    0x00
+#define HCI_CR_CONN_ALLOW_SWITCH        0x01
+
+/*
+** Hold Mode command destination
+*/
+#define HOLD_MODE_DEST_LOCAL_DEVICE     0x00
+#define HOLD_MODE_DEST_RMT_DEVICE       0x01
+
+/*
+**  Definitions for different HCI parameters
+*/
+#define HCI_PER_INQ_MIN_MAX_PERIOD      0x0003
+#define HCI_PER_INQ_MAX_MAX_PERIOD      0xFFFF
+#define HCI_PER_INQ_MIN_MIN_PERIOD      0x0002
+#define HCI_PER_INQ_MAX_MIN_PERIOD      0xFFFE
+
+#define HCI_MAX_INQUIRY_LENGTH          0x30
+
+#define HCI_MIN_INQ_LAP                 0x9E8B00
+#define HCI_MAX_INQ_LAP                 0x9E8B3F
+
+/* HCI role defenitions */
+#define HCI_ROLE_MASTER                 0x00
+#define HCI_ROLE_SLAVE                  0x01
+#define HCI_ROLE_UNKNOWN                0xff
+
+/* HCI mode defenitions */
+#define HCI_MODE_ACTIVE                 0x00
+#define HCI_MODE_HOLD                   0x01
+#define HCI_MODE_SNIFF                  0x02
+#define HCI_MODE_PARK                   0x03
+
+/* HCI Flow Control Mode defenitions */
+#define HCI_PACKET_BASED_FC_MODE        0x00
+#define HCI_BLOCK_BASED_FC_MODE         0x01
+
+/* Define Packet types as requested by the Host */
+#define HCI_ACL_PKT_TYPE_NONE           0x0000
+#define HCI_ACL_PKT_TYPE_DM1            0x0008
+#define HCI_ACL_PKT_TYPE_DH1            0x0010
+#define HCI_ACL_PKT_TYPE_AUX1           0x0200
+#define HCI_ACL_PKT_TYPE_DM3            0x0400
+#define HCI_ACL_PKT_TYPE_DH3            0x0800
+#define HCI_ACL_PKT_TYPE_DM5            0x4000
+#define HCI_ACL_PKT_TYPE_DH5            0x8000
+
+/* Define key type in the Master Link Key command */
+#define HCI_USE_SEMI_PERMANENT_KEY      0x00
+#define HCI_USE_TEMPORARY_KEY           0x01
+
+/* Page scan period modes */
+#define HCI_PAGE_SCAN_REP_MODE_R0       0x00
+#define HCI_PAGE_SCAN_REP_MODE_R1       0x01
+#define HCI_PAGE_SCAN_REP_MODE_R2       0x02
+
+/* Define limits for page scan repetition modes */
+#define HCI_PAGE_SCAN_R1_LIMIT          0x0800
+#define HCI_PAGE_SCAN_R2_LIMIT          0x1000
+
+/* Page scan period modes */
+#define HCI_PAGE_SCAN_PER_MODE_P0       0x00
+#define HCI_PAGE_SCAN_PER_MODE_P1       0x01
+#define HCI_PAGE_SCAN_PER_MODE_P2       0x02
+
+/* Page scan modes */
+#define HCI_MANDATARY_PAGE_SCAN_MODE    0x00
+#define HCI_OPTIONAL_PAGE_SCAN_MODE1    0x01
+#define HCI_OPTIONAL_PAGE_SCAN_MODE2    0x02
+#define HCI_OPTIONAL_PAGE_SCAN_MODE3    0x03
+
+/* Page and inquiry scan types */
+#define HCI_SCAN_TYPE_STANDARD          0x00
+#define HCI_SCAN_TYPE_INTERLACED        0x01       /* 1.2 devices or later */
+#define HCI_DEF_SCAN_TYPE               HCI_SCAN_TYPE_STANDARD
+
+/* Definitions for quality of service service types */
+#define HCI_SERVICE_NO_TRAFFIC          0x00
+#define HCI_SERVICE_BEST_EFFORT         0x01
+#define HCI_SERVICE_GUARANTEED          0x02
+
+#define HCI_QOS_LATENCY_DO_NOT_CARE     0xFFFFFFFF
+#define HCI_QOS_DELAY_DO_NOT_CARE       0xFFFFFFFF
+
+/* Definitions for Flow Specification */
+#define HCI_FLOW_SPEC_LATENCY_DO_NOT_CARE 0xFFFFFFFF
+
+/* Definitions for AFH Channel Map */
+#define HCI_AFH_CHANNEL_MAP_LEN         10
+
+/* Definitions for Extended Inquiry Response */
+#define HCI_EXT_INQ_RESPONSE_LEN        240
+#define HCI_EIR_FLAGS_TYPE                   BT_EIR_FLAGS_TYPE
+#define HCI_EIR_MORE_16BITS_UUID_TYPE        BT_EIR_MORE_16BITS_UUID_TYPE
+#define HCI_EIR_COMPLETE_16BITS_UUID_TYPE    BT_EIR_COMPLETE_16BITS_UUID_TYPE
+#define HCI_EIR_MORE_32BITS_UUID_TYPE        BT_EIR_MORE_32BITS_UUID_TYPE
+#define HCI_EIR_COMPLETE_32BITS_UUID_TYPE    BT_EIR_COMPLETE_32BITS_UUID_TYPE
+#define HCI_EIR_MORE_128BITS_UUID_TYPE       BT_EIR_MORE_128BITS_UUID_TYPE
+#define HCI_EIR_COMPLETE_128BITS_UUID_TYPE   BT_EIR_COMPLETE_128BITS_UUID_TYPE
+#define HCI_EIR_SHORTENED_LOCAL_NAME_TYPE    BT_EIR_SHORTENED_LOCAL_NAME_TYPE
+#define HCI_EIR_COMPLETE_LOCAL_NAME_TYPE     BT_EIR_COMPLETE_LOCAL_NAME_TYPE
+#define HCI_EIR_TX_POWER_LEVEL_TYPE          BT_EIR_TX_POWER_LEVEL_TYPE
+#define HCI_EIR_MANUFACTURER_SPECIFIC_TYPE   BT_EIR_MANUFACTURER_SPECIFIC_TYPE
+#define HCI_EIR_OOB_BD_ADDR_TYPE             BT_EIR_OOB_BD_ADDR_TYPE
+#define HCI_EIR_OOB_COD_TYPE                 BT_EIR_OOB_COD_TYPE
+#define HCI_EIR_OOB_SSP_HASH_C_TYPE          BT_EIR_OOB_SSP_HASH_C_TYPE
+#define HCI_EIR_OOB_SSP_RAND_R_TYPE          BT_EIR_OOB_SSP_RAND_R_TYPE
+
+/* Definitions for Write Simple Pairing Mode */
+#define HCI_SP_MODE_UNDEFINED           0x00
+#define HCI_SP_MODE_ENABLED             0x01
+
+/* Definitions for Write Simple Pairing Debug Mode */
+#define HCI_SPD_MODE_DISABLED           0x00
+#define HCI_SPD_MODE_ENABLED            0x01
+
+/* Definitions for IO Capability Response/Command */
+#define HCI_IO_CAP_DISPLAY_ONLY         0x00
+#define HCI_IO_CAP_DISPLAY_YESNO        0x01
+#define HCI_IO_CAP_KEYBOARD_ONLY        0x02
+#define HCI_IO_CAP_NO_IO                0x03
+
+#define HCI_OOB_AUTH_DATA_NOT_PRESENT   0x00
+#define HCI_OOB_REM_AUTH_DATA_PRESENT   0x01
+
+#define HCI_MITM_PROTECT_NOT_REQUIRED  0x00
+#define HCI_MITM_PROTECT_REQUIRED      0x01
+
+
+/* Policy settings status */
+#define HCI_DISABLE_ALL_LM_MODES        0x0000
+#define HCI_ENABLE_MASTER_SLAVE_SWITCH  0x0001
+#define HCI_ENABLE_HOLD_MODE            0x0002
+#define HCI_ENABLE_SNIFF_MODE           0x0004
+#define HCI_ENABLE_PARK_MODE            0x0008
+
+/* By default allow switch, because host can not allow that */
+/* that until he created the connection */
+#define HCI_DEFAULT_POLICY_SETTINGS     HCI_DISABLE_ALL_LM_MODES
+
+/* Filters that are sent in set filter command */
+#define HCI_FILTER_TYPE_CLEAR_ALL       0x00
+#define HCI_FILTER_INQUIRY_RESULT       0x01
+#define HCI_FILTER_CONNECTION_SETUP     0x02
+
+#define HCI_FILTER_COND_NEW_DEVICE      0x00
+#define HCI_FILTER_COND_DEVICE_CLASS    0x01
+#define HCI_FILTER_COND_BD_ADDR         0x02
+
+#define HCI_DO_NOT_AUTO_ACCEPT_CONNECT  1
+#define HCI_DO_AUTO_ACCEPT_CONNECT      2   /* role switch disabled */
+#define HCI_DO_AUTO_ACCEPT_CONNECT_RS   3   /* role switch enabled (1.1 errata 1115) */
+
+/* Auto accept flags */
+#define HCI_AUTO_ACCEPT_OFF             0x00
+#define HCI_AUTO_ACCEPT_ACL_CONNECTIONS 0x01
+#define HCI_AUTO_ACCEPT_SCO_CONNECTIONS 0x02
+
+/* PIN type */
+#define HCI_PIN_TYPE_VARIABLE           0
+#define HCI_PIN_TYPE_FIXED              1
+
+/* Loopback Modes */
+#define HCI_LOOPBACK_MODE_DISABLED      0
+#define HCI_LOOPBACK_MODE_LOCAL         1
+#define HCI_LOOPBACK_MODE_REMOTE        2
+
+#define SLOTS_PER_10MS                  16      /* 0.625 ms slots in a 10 ms tick */
+
+/* Maximum connection accept timeout in 0.625msec */
+#define HCI_MAX_CONN_ACCEPT_TOUT        0xB540  /* 29 sec */
+#define HCI_DEF_CONN_ACCEPT_TOUT        0x1F40  /* 5 sec */
+
+/* Page timeout is used in LC only and LC is counting down slots not using OS */
+#define HCI_DEFAULT_PAGE_TOUT           0x2000  /* 5.12 sec (in slots) */
+
+/* Scan enable flags */
+#define HCI_NO_SCAN_ENABLED             0x00
+#define HCI_INQUIRY_SCAN_ENABLED        0x01
+#define HCI_PAGE_SCAN_ENABLED           0x02
+
+/* Pagescan timer definitions in 0.625 ms */
+#define HCI_MIN_PAGESCAN_INTERVAL       0x12    /* 11.25 ms */
+#define HCI_MAX_PAGESCAN_INTERVAL       0x1000  /* 2.56 sec */
+#define HCI_DEF_PAGESCAN_INTERVAL       0x0800  /* 1.28 sec */
+
+/* Parameter for pagescan window is passed to LC and is kept in slots */
+#define HCI_MIN_PAGESCAN_WINDOW         0x11    /* 10.625 ms */
+#define HCI_MAX_PAGESCAN_WINDOW         0x1000  /* 2.56  sec */
+#define HCI_DEF_PAGESCAN_WINDOW         0x12    /* 11.25 ms  */
+
+/* Inquiryscan timer definitions in 0.625 ms */
+#define HCI_MIN_INQUIRYSCAN_INTERVAL    0x12    /* 11.25 ms */
+#define HCI_MAX_INQUIRYSCAN_INTERVAL    0x1000  /* 2.56 sec */
+#define HCI_DEF_INQUIRYSCAN_INTERVAL    0x1000  /* 2.56 sec */
+
+/* Parameter for inquiryscan window is passed to LC and is kept in slots */
+#define HCI_MIN_INQUIRYSCAN_WINDOW      0x11    /* 10.625 ms */
+#define HCI_MAX_INQUIRYSCAN_WINDOW      0x1000  /* 2.56 sec */
+#define HCI_DEF_INQUIRYSCAN_WINDOW      0x12    /* 11.25 ms */
+
+/* Encryption modes */
+#define HCI_ENCRYPT_MODE_DISABLED       0x00
+#define HCI_ENCRYPT_MODE_POINT_TO_POINT 0x01
+#define HCI_ENCRYPT_MODE_ALL            0x02
+
+/* Voice settings */
+#define HCI_INP_CODING_LINEAR           0x0000 /* 0000000000 */
+#define HCI_INP_CODING_U_LAW            0x0100 /* 0100000000 */
+#define HCI_INP_CODING_A_LAW            0x0200 /* 1000000000 */
+#define HCI_INP_CODING_MASK             0x0300 /* 1100000000 */
+
+#define HCI_INP_DATA_FMT_1S_COMPLEMENT  0x0000 /* 0000000000 */
+#define HCI_INP_DATA_FMT_2S_COMPLEMENT  0x0040 /* 0001000000 */
+#define HCI_INP_DATA_FMT_SIGN_MAGNITUDE 0x0080 /* 0010000000 */
+#define HCI_INP_DATA_FMT_UNSIGNED       0x00c0 /* 0011000000 */
+#define HCI_INP_DATA_FMT_MASK           0x00c0 /* 0011000000 */
+
+#define HCI_INP_SAMPLE_SIZE_8BIT        0x0000 /* 0000000000 */
+#define HCI_INP_SAMPLE_SIZE_16BIT       0x0020 /* 0000100000 */
+#define HCI_INP_SAMPLE_SIZE_MASK        0x0020 /* 0000100000 */
+
+#define HCI_INP_LINEAR_PCM_BIT_POS_MASK 0x001c /* 0000011100 */
+#define HCI_INP_LINEAR_PCM_BIT_POS_OFFS 2
+
+#define HCI_AIR_CODING_FORMAT_CVSD      0x0000 /* 0000000000 */
+#define HCI_AIR_CODING_FORMAT_U_LAW     0x0001 /* 0000000001 */
+#define HCI_AIR_CODING_FORMAT_A_LAW     0x0002 /* 0000000010 */
+#define HCI_AIR_CODING_FORMAT_TRANSPNT  0x0003 /* 0000000011 */
+#define HCI_AIR_CODING_FORMAT_MASK      0x0003 /* 0000000011 */
+
+/* default                                        0001100000 */
+#define HCI_DEFAULT_VOICE_SETTINGS    (HCI_INP_CODING_LINEAR \
+                                     | HCI_INP_DATA_FMT_2S_COMPLEMENT \
+                                     | HCI_INP_SAMPLE_SIZE_16BIT \
+                                     | HCI_AIR_CODING_FORMAT_CVSD)
+
+#define HCI_CVSD_SUPPORTED(x)       (((x) & HCI_AIR_CODING_FORMAT_MASK) == HCI_AIR_CODING_FORMAT_CVSD)
+#define HCI_U_LAW_SUPPORTED(x)      (((x) & HCI_AIR_CODING_FORMAT_MASK) == HCI_AIR_CODING_FORMAT_U_LAW)
+#define HCI_A_LAW_SUPPORTED(x)      (((x) & HCI_AIR_CODING_FORMAT_MASK) == HCI_AIR_CODING_FORMAT_A_LAW)
+#define HCI_TRANSPNT_SUPPORTED(x)   (((x) & HCI_AIR_CODING_FORMAT_MASK) == HCI_AIR_CODING_FORMAT_TRANSPNT)
+
+/* Retransmit timer definitions in 0.625 */
+#define HCI_MAX_AUTO_FLUSH_TOUT         0x07FF
+#define HCI_DEFAULT_AUTO_FLUSH_TOUT     0       /* No auto flush */
+
+/* Broadcast retransmitions */
+#define HCI_DEFAULT_NUM_BCAST_RETRAN    1
+
+/* Define broadcast data types as passed in the hci data packet */
+#define HCI_DATA_POINT_TO_POINT         0x00
+#define HCI_DATA_ACTIVE_BCAST           0x01
+#define HCI_DATA_PICONET_BCAST          0x02
+
+/* Hold mode activity */
+#define HCI_MAINTAIN_CUR_POWER_STATE    0x00
+#define HCI_SUSPEND_PAGE_SCAN           0x01
+#define HCI_SUSPEND_INQUIRY_SCAN        0x02
+#define HCI_SUSPEND_PERIODIC_INQUIRIES  0x04
+
+/* Default Link Supervision timeoout */
+#define HCI_DEFAULT_INACT_TOUT          0x7D00  /* BR/EDR (20 seconds) */
+#define HCI_DEFAULT_AMP_INACT_TOUT      0x3E80  /* AMP    (10 seconds) */
+
+/* Read transmit power level parameter */
+#define HCI_READ_CURRENT                0x00
+#define HCI_READ_MAXIMUM                0x01
+
+/* Link types for connection complete event */
+#define HCI_LINK_TYPE_SCO               0x00
+#define HCI_LINK_TYPE_ACL               0x01
+#define HCI_LINK_TYPE_ESCO              0x02
+
+/* Link Key Notification Event (Key Type) definitions */
+#define HCI_LKEY_TYPE_COMBINATION       0x00
+#define HCI_LKEY_TYPE_LOCAL_UNIT        0x01
+#define HCI_LKEY_TYPE_REMOTE_UNIT       0x02
+#define HCI_LKEY_TYPE_DEBUG_COMB        0x03
+#define HCI_LKEY_TYPE_UNAUTH_COMB       0x04
+#define HCI_LKEY_TYPE_AUTH_COMB         0x05
+#define HCI_LKEY_TYPE_CHANGED_COMB      0x06
+
+/* Internal definitions - not used over HCI */
+#define HCI_LKEY_TYPE_AMP_WIFI          0x80
+#define HCI_LKEY_TYPE_AMP_UWB           0x81
+#define HCI_LKEY_TYPE_UNKNOWN           0xff
+
+/* Read Local Version HCI Version return values (Command Complete Event) */
+#define HCI_VERSION_1_0B                0x00
+#define HCI_VERSION_1_1                 0x01
+
+/* Define an invalid value for a handle */
+#define HCI_INVALID_HANDLE              0xFFFF
+
+/* Define max ammount of data in the HCI command */
+#define HCI_COMMAND_SIZE        255
+
+/* Define the preamble length for all HCI Commands.
+** This is 2-bytes for opcode and 1 byte for length
+*/
+#define HCIC_PREAMBLE_SIZE      3
+
+/* Define the preamble length for all HCI Events
+** This is 1-byte for opcode and 1 byte for length
+*/
+#define HCIE_PREAMBLE_SIZE      2
+#define HCI_SCO_PREAMBLE_SIZE   3
+#define HCI_DATA_PREAMBLE_SIZE  4
+
+/* local Bluetooth controller id for AMP HCI */
+#define LOCAL_BR_EDR_CONTROLLER_ID      0
+
+/* controller id types for AMP HCI */
+#define HCI_CONTROLLER_TYPE_BR_EDR      0
+#define HCI_CONTROLLER_TYPE_802_11      1
+#define HCI_CONTROLLER_TYPE_ECMA        2
+#define HCI_MAX_CONTROLLER_TYPES        3
+
+
+
+
+/* AMP Controller Status codes
+*/
+#define HCI_AMP_CTRLR_PHYSICALLY_DOWN   0
+#define HCI_AMP_CTRLR_USABLE_BY_BT      1
+#define HCI_AMP_CTRLR_UNUSABLE_FOR_BT   2
+#define HCI_AMP_CTRLR_LOW_CAP_FOR_BT    3
+#define HCI_AMP_CTRLR_MED_CAP_FOR_BT    4
+#define HCI_AMP_CTRLR_HIGH_CAP_FOR_BT   5
+#define HCI_AMP_CTRLR_FULL_CAP_FOR_BT   6
+
+#define HCI_MAX_AMP_STATUS_TYPES        7
+
+
+/* Define the extended flow specification fields used by AMP */
+typedef struct
+{
+    UINT8       id;
+    UINT8       stype;
+    UINT16      max_sdu_size;
+    UINT32      sdu_inter_time;
+    UINT32      access_latency;
+    UINT32      flush_timeout;
+} tHCI_EXT_FLOW_SPEC;
+
+
+/* HCI message type definitions (for H4 messages) */
+#define HCIT_TYPE_COMMAND   1
+#define HCIT_TYPE_ACL_DATA  2
+#define HCIT_TYPE_SCO_DATA  3
+#define HCIT_TYPE_EVENT     4
+#define HCIT_TYPE_LM_DIAG   7
+#define HCIT_TYPE_NFC       16
+
+#define HCIT_LM_DIAG_LENGTH 63
+
+/* Parameter information for HCI_BRCM_SET_ACL_PRIORITY */
+#define HCI_BRCM_ACL_PRIORITY_PARAM_SIZE    3
+#define HCI_BRCM_ACL_PRIORITY_LOW           0x00
+#define HCI_BRCM_ACL_PRIORITY_HIGH          0xFF
+#define HCI_BRCM_SET_ACL_PRIORITY           (0x0057 | HCI_GRP_VENDOR_SPECIFIC)
+
+/* Define values for LMP Test Control parameters
+** Test Scenario, Hopping Mode, Power Control Mode
+*/
+#define LMP_TESTCTL_TESTSC_PAUSE        0
+#define LMP_TESTCTL_TESTSC_TXTEST_0     1
+#define LMP_TESTCTL_TESTSC_TXTEST_1     2
+#define LMP_TESTCTL_TESTSC_TXTEST_1010  3
+#define LMP_TESTCTL_TESTSC_PSRND_BITSEQ 4
+#define LMP_TESTCTL_TESTSC_CLOSEDLB_ACL 5
+#define LMP_TESTCTL_TESTSC_CLOSEDLB_SCO 6
+#define LMP_TESTCTL_TESTSC_ACL_NOWHIT   7
+#define LMP_TESTCTL_TESTSC_SCO_NOWHIT   8
+#define LMP_TESTCTL_TESTSC_TXTEST_11110000  9
+#define LMP_TESTCTL_TESTSC_EXITTESTMODE 255
+
+#define LMP_TESTCTL_HOPMOD_RXTX1FREQ    0
+#define LMP_TESTCTL_HOPMOD_HOP_EURUSA   1
+#define LMP_TESTCTL_HOPMOD_HOP_JAPAN    2
+#define LMP_TESTCTL_HOPMOD_HOP_FRANCE   3
+#define LMP_TESTCTL_HOPMOD_HOP_SPAIN    4
+#define LMP_TESTCTL_HOPMOD_REDUCED_HOP  5
+
+#define LMP_TESTCTL_POWCTL_FIXEDTX_OP   0
+#define LMP_TESTCTL_POWCTL_ADAPTIVE     1
+
+
+/*
+** Define company IDs (from Bluetooth Assigned Numbers v1.1, section 2.2)
+*/
+#define LMP_COMPID_ERICSSON             0
+#define LMP_COMPID_NOKIA                1
+#define LMP_COMPID_INTEL                2
+#define LMP_COMPID_IBM                  3
+#define LMP_COMPID_TOSHIBA              4
+#define LMP_COMPID_3COM                 5
+#define LMP_COMPID_MICROSOFT            6
+#define LMP_COMPID_LUCENT               7
+#define LMP_COMPID_MOTOROLA             8
+#define LMP_COMPID_INFINEON             9
+#define LMP_COMPID_CSR                  10
+#define LMP_COMPID_SILICON_WAVE         11
+#define LMP_COMPID_DIGIANSWER           12
+#define LMP_COMPID_TEXAS_INSTRUMENTS    13
+#define LMP_COMPID_PARTHUS              14
+#define LMP_COMPID_BROADCOM             15
+#define LMP_COMPID_MITEL_SEMI           16
+#define LMP_COMPID_WIDCOMM              17
+#define LMP_COMPID_ZEEVO                18
+#define LMP_COMPID_ATMEL                19
+#define LMP_COMPID_MITSUBISHI           20
+#define LMP_COMPID_RTX_TELECOM          21
+#define LMP_COMPID_KC_TECH              22
+#define LMP_COMPID_NEWLOGIC             23
+#define LMP_COMPID_TRANSILICA           24
+#define LMP_COMPID_ROHDE_SCHWARZ        25
+#define LMP_COMPID_TTPCOM               26
+#define LMP_COMPID_SIGNIA               27
+#define LMP_COMPID_CONEXANT             28
+#define LMP_COMPID_QUALCOMM             29
+#define LMP_COMPID_INVENTEL             30
+#define LMP_COMPID_AVM                  31
+#define LMP_COMPID_BANDSPEED            32
+#define LMP_COMPID_MANSELLA             33
+#define LMP_COMPID_NEC_CORP             34
+#define LMP_COMPID_WAVEPLUS             35
+#define LMP_COMPID_ALCATEL              36
+#define LMP_COMPID_PHILIPS              37
+#define LMP_COMPID_C_TECHNOLOGIES       38
+#define LMP_COMPID_OPEN_INTERFACE       39
+#define LMP_COMPID_RF_MICRO             40
+#define LMP_COMPID_HITACHI              41
+#define LMP_COMPID_SYMBOL_TECH          42
+#define LMP_COMPID_TENOVIS              43
+#define LMP_COMPID_MACRONIX             44
+#define LMP_COMPID_GCT_SEMI             45
+#define LMP_COMPID_NORWOOD_SYSTEMS      46
+#define LMP_COMPID_MEWTEL_TECH          47
+#define LMP_COMPID_STM                  48
+#define LMP_COMPID_SYNOPSYS             49
+#define LMP_COMPID_RED_M_LTD            50
+#define LMP_COMPID_COMMIL_LTD           51
+#define LMP_COMPID_CATC                 52
+#define LMP_COMPID_ECLIPSE              53
+#define LMP_COMPID_RENESAS_TECH         54
+#define LMP_COMPID_MOBILIAN_CORP        55
+#define LMP_COMPID_TERAX                56
+#define LMP_COMPID_ISSC                 57
+#define LMP_COMPID_MATSUSHITA           58
+#define LMP_COMPID_GENNUM_CORP          59
+#define LMP_COMPID_RESEARCH_IN_MOTION   60
+#define LMP_COMPID_IPEXTREME            61
+#define LMP_COMPID_SYSTEMS_AND_CHIPS    62
+#define LMP_COMPID_BLUETOOTH_SIG        63
+#define LMP_COMPID_SEIKO_EPSON_CORP     64
+#define LMP_COMPID_ISS_TAIWAN           65
+#define LMP_COMPID_CONWISE_TECHNOLOGIES 66
+#define LMP_COMPID_PARROT_SA            67
+#define LMP_COMPID_SOCKET_COMM          68
+#define LMP_COMPID_ALTHEROS             69
+#define LMP_COMPID_MEDIATEK             70
+#define LMP_COMPID_BLUEGIGA             71
+#define LMP_COMPID_MARVELL              72
+#define LMP_COMPID_3DSP_CORP            73
+#define LMP_COMPID_ACCEL_SEMICONDUCTOR  74
+#define LMP_COMPID_CONTINENTAL_AUTO     75
+#define LMP_COMPID_APPLE                76
+#define LMP_COMPID_STACCATO             77
+#define LMP_COMPID_AVAGO_TECHNOLOGIES   78
+#define LMP_COMPID_APT_LTD              79
+#define LMP_COMPID_SIRF_TECHNOLOGY      80
+#define LMP_COMPID_TZERO_TECHNOLOGY     81
+#define LMP_COMPID_J_AND_M_CORP         82
+#define LMP_COMPID_FREE_2_MOVE          83
+#define LMP_COMPID_3DIJOY_CORP          84
+#define LMP_COMPID_PLANTRONICS          85
+#define LMP_COMPID_SONY_ERICSSON_MOBILE 86
+#define LMP_COMPID_HARMON_INTL_IND      87
+#define LMP_COMPID_VIZIO                88
+#define LMP_COMPID_NORDIC SEMI          89
+#define LMP_COMPID_EM MICRO             90
+#define LMP_COMPID_RALINK TECH          91
+#define LMP_COMPID_BELKIN INC           92
+#define LMP_COMPID_REALTEK SEMI         93
+#define LMP_COMPID_STONESTREET ONE      94
+#define LMP_COMPID_WICENTRIC            95
+#define LMP_COMPID_RIVIERAWAVES         96
+#define LMP_COMPID_RDA MICRO            97
+#define LMP_COMPID_GIBSON GUITARS       98
+#define LMP_COMPID_MICOMMAND INC        99
+#define LMP_COMPID_BAND XI              100
+#define LMP_COMPID_HP COMPANY           101
+#define LMP_COMPID_9SOLUTIONS OY        102
+#define LMP_COMPID_GN NETCOM            103
+#define LMP_COMPID_GENERAL MOTORS       104
+#define LMP_COMPID_AD ENGINEERING       105
+#define LMP_COMPID_MINDTREE LTD         106
+#define LMP_COMPID_POLAR ELECTRO        107
+#define LMP_COMPID_BEAUTIFUL ENTERPRISE 108
+#define LMP_COMPID_BRIARTEK             109
+#define LMP_COMPID_SUMMIT DATA COMM     110
+#define LMP_COMPID_SOUND ID             111
+#define LMP_COMPID_MONSTER LLC          112
+#define LMP_COMPID_CONNECTBLU           113
+#define LMP_COMPID_MAX_ID               114 /* this is a place holder */
+#define LMP_COMPID_INTERNAL             65535
+
+#define MAX_LMP_COMPID                  (LMP_COMPID_MAX_ID)
+/*
+** Define the packet types in the packet header, and a couple extra
+*/
+#define PKT_TYPE_NULL   0x00
+#define PKT_TYPE_POLL   0x01
+#define PKT_TYPE_FHS    0x02
+#define PKT_TYPE_DM1    0x03
+
+#define PKT_TYPE_DH1    0x04
+#define PKT_TYPE_HV1    0x05
+#define PKT_TYPE_HV2    0x06
+#define PKT_TYPE_HV3    0x07
+#define PKT_TYPE_DV     0x08
+#define PKT_TYPE_AUX1   0x09
+
+#define PKT_TYPE_DM3    0x0a
+#define PKT_TYPE_DH3    0x0b
+
+#define PKT_TYPE_DM5    0x0e
+#define PKT_TYPE_DH5    0x0f
+
+
+#define PKT_TYPE_ID     0x10        /* Internally used packet types */
+#define PKT_TYPE_BAD    0x11
+#define PKT_TYPE_NONE   0x12
+
+/*
+** Define packet size
+*/
+#define HCI_DM1_PACKET_SIZE         17
+#define HCI_DH1_PACKET_SIZE         27
+#define HCI_DM3_PACKET_SIZE         121
+#define HCI_DH3_PACKET_SIZE         183
+#define HCI_DM5_PACKET_SIZE         224
+#define HCI_DH5_PACKET_SIZE         339
+#define HCI_AUX1_PACKET_SIZE        29
+#define HCI_HV1_PACKET_SIZE         10
+#define HCI_HV2_PACKET_SIZE         20
+#define HCI_HV3_PACKET_SIZE         30
+#define HCI_DV_PACKET_SIZE          9
+#define HCI_EDR2_DH1_PACKET_SIZE    54
+#define HCI_EDR2_DH3_PACKET_SIZE    367
+#define HCI_EDR2_DH5_PACKET_SIZE    679
+#define HCI_EDR3_DH1_PACKET_SIZE    83
+#define HCI_EDR3_DH3_PACKET_SIZE    552
+#define HCI_EDR3_DH5_PACKET_SIZE    1021
+
+/*
+**   Features encoding - page 0
+*/
+#define HCI_NUM_FEATURE_BYTES           8
+#define HCI_FEATURES_KNOWN(x) ((x[0] | x[1] | x[2] | x[3] | x[4] | x[5] | x[6] | x[7]) != 0)
+
+#define HCI_FEATURE_3_SLOT_PACKETS_MASK 0x01
+#define HCI_FEATURE_3_SLOT_PACKETS_OFF  0
+#define HCI_3_SLOT_PACKETS_SUPPORTED(x) ((x)[HCI_FEATURE_3_SLOT_PACKETS_OFF] & HCI_FEATURE_3_SLOT_PACKETS_MASK)
+
+#define HCI_FEATURE_5_SLOT_PACKETS_MASK 0x02
+#define HCI_FEATURE_5_SLOT_PACKETS_OFF  0
+#define HCI_5_SLOT_PACKETS_SUPPORTED(x) ((x)[HCI_FEATURE_5_SLOT_PACKETS_OFF] & HCI_FEATURE_5_SLOT_PACKETS_MASK)
+
+#define HCI_FEATURE_ENCRYPTION_MASK     0x04
+#define HCI_FEATURE_ENCRYPTION_OFF      0
+#define HCI_ENCRYPTION_SUPPORTED(x)     ((x)[HCI_FEATURE_ENCRYPTION_OFF] & HCI_FEATURE_ENCRYPTION_MASK)
+
+#define HCI_FEATURE_SLOT_OFFSET_MASK    0x08
+#define HCI_FEATURE_SLOT_OFFSET_OFF     0
+#define HCI_SLOT_OFFSET_SUPPORTED(x)    ((x)[HCI_FEATURE_SLOT_OFFSET_OFF] & HCI_FEATURE_SLOT_OFFSET_MASK)
+
+#define HCI_FEATURE_TIMING_ACC_MASK     0x10
+#define HCI_FEATURE_TIMING_ACC_OFF      0
+#define HCI_TIMING_ACC_SUPPORTED(x)     ((x)[HCI_FEATURE_TIMING_ACC_OFF] & HCI_FEATURE_TIMING_ACC_MASK)
+
+#define HCI_FEATURE_SWITCH_MASK         0x20
+#define HCI_FEATURE_SWITCH_OFF          0
+#define HCI_SWITCH_SUPPORTED(x)         ((x)[HCI_FEATURE_SWITCH_OFF] & HCI_FEATURE_SWITCH_MASK)
+
+#define HCI_FEATURE_HOLD_MODE_MASK      0x40
+#define HCI_FEATURE_HOLD_MODE_OFF       0
+#define HCI_HOLD_MODE_SUPPORTED(x)      ((x)[HCI_FEATURE_HOLD_MODE_OFF] & HCI_FEATURE_HOLD_MODE_MASK)
+
+#define HCI_FEATURE_SNIFF_MODE_MASK     0x80
+#define HCI_FEATURE_SNIFF_MODE_OFF      0
+#define HCI_SNIFF_MODE_SUPPORTED(x)      ((x)[HCI_FEATURE_SNIFF_MODE_OFF] & HCI_FEATURE_SNIFF_MODE_MASK)
+
+#define HCI_FEATURE_PARK_MODE_MASK      0x01
+#define HCI_FEATURE_PARK_MODE_OFF       1
+#define HCI_PARK_MODE_SUPPORTED(x)      ((x)[HCI_FEATURE_PARK_MODE_OFF] & HCI_FEATURE_PARK_MODE_MASK)
+
+#define HCI_FEATURE_RSSI_MASK           0x02
+#define HCI_FEATURE_RSSI_OFF            1
+#define HCI_RSSI_SUPPORTED(x)           ((x)[HCI_FEATURE_RSSI_OFF] & HCI_FEATURE_RSSI_MASK)
+
+#define HCI_FEATURE_CQM_DATA_RATE_MASK  0x04
+#define HCI_FEATURE_CQM_DATA_RATE_OFF   1
+#define HCI_CQM_DATA_RATE_SUPPORTED(x)  ((x)[HCI_FEATURE_CQM_DATA_RATE_OFF] & HCI_FEATURE_CQM_DATA_RATE_MASK)
+
+#define HCI_FEATURE_SCO_LINK_MASK       0x08
+#define HCI_FEATURE_SCO_LINK_OFF        1
+#define HCI_SCO_LINK_SUPPORTED(x)       ((x)[HCI_FEATURE_SCO_LINK_OFF] & HCI_FEATURE_SCO_LINK_MASK)
+
+#define HCI_FEATURE_HV2_PACKETS_MASK    0x10
+#define HCI_FEATURE_HV2_PACKETS_OFF     1
+#define HCI_HV2_PACKETS_SUPPORTED(x)    ((x)[HCI_FEATURE_HV2_PACKETS_OFF] & HCI_FEATURE_HV2_PACKETS_MASK)
+
+#define HCI_FEATURE_HV3_PACKETS_MASK    0x20
+#define HCI_FEATURE_HV3_PACKETS_OFF     1
+#define HCI_HV3_PACKETS_SUPPORTED(x)    ((x)[HCI_FEATURE_HV3_PACKETS_OFF] & HCI_FEATURE_HV3_PACKETS_MASK)
+
+#define HCI_FEATURE_U_LAW_MASK          0x40
+#define HCI_FEATURE_U_LAW_OFF           1
+#define HCI_LMP_U_LAW_SUPPORTED(x)      ((x)[HCI_FEATURE_U_LAW_OFF] & HCI_FEATURE_U_LAW_MASK)
+
+#define HCI_FEATURE_A_LAW_MASK          0x80
+#define HCI_FEATURE_A_LAW_OFF           1
+#define HCI_LMP_A_LAW_SUPPORTED(x)      ((x)[HCI_FEATURE_A_LAW_OFF] & HCI_FEATURE_A_LAW_MASK)
+
+#define HCI_FEATURE_CVSD_MASK           0x01
+#define HCI_FEATURE_CVSD_OFF            2
+#define HCI_LMP_CVSD_SUPPORTED(x)       ((x)[HCI_FEATURE_CVSD_OFF] & HCI_FEATURE_CVSD_MASK)
+
+#define HCI_FEATURE_PAGING_SCHEME_MASK  0x02
+#define HCI_FEATURE_PAGING_SCHEME_OFF   2
+#define HCI_PAGING_SCHEME_SUPPORTED(x) ((x)[HCI_FEATURE_PAGING_SCHEME_OFF] & HCI_FEATURE_PAGING_SCHEME_MASK)
+
+#define HCI_FEATURE_POWER_CTRL_MASK     0x04
+#define HCI_FEATURE_POWER_CTRL_OFF      2
+#define HCI_POWER_CTRL_SUPPORTED(x)     ((x)[HCI_FEATURE_POWER_CTRL_OFF] & HCI_FEATURE_POWER_CTRL_MASK)
+
+#define HCI_FEATURE_TRANSPNT_MASK       0x08
+#define HCI_FEATURE_TRANSPNT_OFF        2
+#define HCI_LMP_TRANSPNT_SUPPORTED(x)   ((x)[HCI_FEATURE_TRANSPNT_OFF] & HCI_FEATURE_TRANSPNT_MASK)
+
+#define HCI_FEATURE_FLOW_CTRL_LAG_MASK  0x70
+#define HCI_FEATURE_FLOW_CTRL_LAG_OFF   2
+#define HCI_FLOW_CTRL_LAG_VALUE(x)      (((x)[HCI_FEATURE_FLOW_CTRL_LAG_OFF] & HCI_FEATURE_FLOW_CTRL_LAG_MASK) >> 4)
+
+#define HCI_FEATURE_BROADCAST_ENC_MASK  0x80
+#define HCI_FEATURE_BROADCAST_ENC_OFF   2
+#define HCI_LMP_BCAST_ENC_SUPPORTED(x)  ((x)[HCI_FEATURE_BROADCAST_ENC_OFF] & HCI_FEATURE_BROADCAST_ENC_MASK)
+
+#define HCI_FEATURE_SCATTER_MODE_MASK   0x01
+#define HCI_FEATURE_SCATTER_MODE_OFF    3
+#define HCI_LMP_SCATTER_MODE_SUPPORTED(x) ((x)[HCI_FEATURE_SCATTER_MODE_OFF] & HCI_FEATURE_SCATTER_MODE_MASK)
+
+#define HCI_FEATURE_EDR_ACL_2MPS_MASK   0x02
+#define HCI_FEATURE_EDR_ACL_2MPS_OFF    3
+#define HCI_EDR_ACL_2MPS_SUPPORTED(x)   ((x)[HCI_FEATURE_EDR_ACL_2MPS_OFF] & HCI_FEATURE_EDR_ACL_2MPS_MASK)
+
+#define HCI_FEATURE_EDR_ACL_3MPS_MASK   0x04
+#define HCI_FEATURE_EDR_ACL_3MPS_OFF    3
+#define HCI_EDR_ACL_3MPS_SUPPORTED(x)   ((x)[HCI_FEATURE_EDR_ACL_3MPS_OFF] & HCI_FEATURE_EDR_ACL_3MPS_MASK)
+
+#define HCI_FEATURE_ENHANCED_INQ_MASK   0x08
+#define HCI_FEATURE_ENHANCED_INQ_OFF    3
+#define HCI_ENHANCED_INQ_SUPPORTED(x)   ((x)[HCI_FEATURE_ENHANCED_INQ_OFF] & HCI_FEATURE_ENHANCED_INQ_MASK)
+
+#define HCI_FEATURE_INTERLACED_INQ_SCAN_MASK   0x10
+#define HCI_FEATURE_INTERLACED_INQ_SCAN_OFF    3
+#define HCI_LMP_INTERLACED_INQ_SCAN_SUPPORTED(x) ((x)[HCI_FEATURE_INTERLACED_INQ_SCAN_OFF] & HCI_FEATURE_INTERLACED_INQ_SCAN_MASK)
+
+#define HCI_FEATURE_INTERLACED_PAGE_SCAN_MASK  0x20
+#define HCI_FEATURE_INTERLACED_PAGE_SCAN_OFF   3
+#define HCI_LMP_INTERLACED_PAGE_SCAN_SUPPORTED(x) ((x)[HCI_FEATURE_INTERLACED_PAGE_SCAN_OFF] & HCI_FEATURE_INTERLACED_PAGE_SCAN_MASK)
+
+#define HCI_FEATURE_INQ_RSSI_MASK       0x40
+#define HCI_FEATURE_INQ_RSSI_OFF        3
+#define HCI_LMP_INQ_RSSI_SUPPORTED(x)   ((x)[HCI_FEATURE_INQ_RSSI_OFF] & HCI_FEATURE_INQ_RSSI_MASK)
+
+#define HCI_FEATURE_ESCO_EV3_MASK       0x80
+#define HCI_FEATURE_ESCO_EV3_OFF        3
+#define HCI_ESCO_EV3_SUPPORTED(x)       ((x)[HCI_FEATURE_ESCO_EV3_OFF] & HCI_FEATURE_ESCO_EV3_MASK)
+
+#define HCI_FEATURE_ESCO_EV4_MASK       0x01
+#define HCI_FEATURE_ESCO_EV4_OFF        4
+#define HCI_ESCO_EV4_SUPPORTED(x)       ((x)[HCI_FEATURE_ESCO_EV4_OFF] & HCI_FEATURE_ESCO_EV4_MASK)
+
+#define HCI_FEATURE_ESCO_EV5_MASK       0x02
+#define HCI_FEATURE_ESCO_EV5_OFF        4
+#define HCI_ESCO_EV5_SUPPORTED(x)       ((x)[HCI_FEATURE_ESCO_EV5_OFF] & HCI_FEATURE_ESCO_EV5_MASK)
+
+#define HCI_FEATURE_ABSENCE_MASKS_MASK  0x04
+#define HCI_FEATURE_ABSENCE_MASKS_OFF   4
+#define HCI_LMP_ABSENCE_MASKS_SUPPORTED(x) ((x)[HCI_FEATURE_ABSENCE_MASKS_OFF] & HCI_FEATURE_ABSENCE_MASKS_MASK)
+
+#define HCI_FEATURE_AFH_CAP_SLAVE_MASK  0x08
+#define HCI_FEATURE_AFH_CAP_SLAVE_OFF   4
+#define HCI_LMP_AFH_CAP_SLAVE_SUPPORTED(x) ((x)[HCI_FEATURE_AFH_CAP_SLAVE_OFF] & HCI_FEATURE_AFH_CAP_SLAVE_MASK)
+
+#define HCI_FEATURE_AFH_CLASS_SLAVE_MASK 0x10
+#define HCI_FEATURE_AFH_CLASS_SLAVE_OFF  4
+#define HCI_LMP_AFH_CLASS_SLAVE_SUPPORTED(x) ((x)[HCI_FEATURE_AFH_CLASS_SLAVE_OFF] & HCI_FEATURE_AFH_CLASS_SLAVE_MASK)
+
+#define HCI_FEATURE_ALIAS_AUTH_MASK     0x20
+#define HCI_FEATURE_ALIAS_AUTH_OFF      4
+#define HCI_LMP_ALIAS_AUTH_SUPPORTED(x) ((x)[HCI_FEATURE_ALIAS_AUTH_OFF] & HCI_FEATURE_ALIAS_AUTH_MASK)
+
+#define HCI_FEATURE_ANON_MODE_MASK      0x40
+#define HCI_FEATURE_ANON_MODE_OFF       4
+#define HCI_LMP_ANON_MODE_SUPPORTED(x)  ((x)[HCI_FEATURE_ANON_MODE_OFF] & HCI_FEATURE_ANON_MODE_MASK)
+
+#define HCI_FEATURE_3_SLOT_EDR_ACL_MASK 0x80
+#define HCI_FEATURE_3_SLOT_EDR_ACL_OFF  4
+#define HCI_3_SLOT_EDR_ACL_SUPPORTED(x) ((x)[HCI_FEATURE_3_SLOT_EDR_ACL_OFF] & HCI_FEATURE_3_SLOT_EDR_ACL_MASK)
+
+#define HCI_FEATURE_5_SLOT_EDR_ACL_MASK 0x01
+#define HCI_FEATURE_5_SLOT_EDR_ACL_OFF  5
+#define HCI_5_SLOT_EDR_ACL_SUPPORTED(x) ((x)[HCI_FEATURE_5_SLOT_EDR_ACL_OFF] & HCI_FEATURE_5_SLOT_EDR_ACL_MASK)
+
+#define HCI_FEATURE_SNIFF_SUB_RATE_MASK 0x02
+#define HCI_FEATURE_SNIFF_SUB_RATE_OFF  5
+#define HCI_SNIFF_SUB_RATE_SUPPORTED(x) ((x)[HCI_FEATURE_SNIFF_SUB_RATE_OFF] & HCI_FEATURE_SNIFF_SUB_RATE_MASK)
+
+#define HCI_FEATURE_ATOMIC_ENCRYPT_MASK 0x04
+#define HCI_FEATURE_ATOMIC_ENCRYPT_OFF  5
+#define HCI_ATOMIC_ENCRYPT_SUPPORTED(x) ((x)[HCI_FEATURE_ATOMIC_ENCRYPT_OFF] & HCI_FEATURE_ATOMIC_ENCRYPT_MASK)
+
+#define HCI_FEATURE_AFH_CAP_MASTR_MASK  0x08
+#define HCI_FEATURE_AFH_CAP_MASTR_OFF   5
+#define HCI_LMP_AFH_CAP_MASTR_SUPPORTED(x) ((x)[HCI_FEATURE_AFH_CAP_MASTR_OFF] & HCI_FEATURE_AFH_CAP_MASTR_MASK)
+
+#define HCI_FEATURE_AFH_CLASS_MASTR_MASK 0x10
+#define HCI_FEATURE_AFH_CLASS_MASTR_OFF  5
+#define HCI_LMP_AFH_CLASS_MASTR_SUPPORTED(x) ((x)[HCI_FEATURE_AFH_CLASS_MASTR_OFF] & HCI_FEATURE_AFH_CLASS_MASTR_MASK)
+
+#define HCI_FEATURE_EDR_ESCO_2MPS_MASK  0x20
+#define HCI_FEATURE_EDR_ESCO_2MPS_OFF   5
+#define HCI_EDR_ESCO_2MPS_SUPPORTED(x)  ((x)[HCI_FEATURE_EDR_ESCO_2MPS_OFF] & HCI_FEATURE_EDR_ESCO_2MPS_MASK)
+
+#define HCI_FEATURE_EDR_ESCO_3MPS_MASK  0x40
+#define HCI_FEATURE_EDR_ESCO_3MPS_OFF   5
+#define HCI_EDR_ESCO_3MPS_SUPPORTED(x)  ((x)[HCI_FEATURE_EDR_ESCO_3MPS_OFF] & HCI_FEATURE_EDR_ESCO_3MPS_MASK)
+
+#define HCI_FEATURE_3_SLOT_EDR_ESCO_MASK 0x80
+#define HCI_FEATURE_3_SLOT_EDR_ESCO_OFF  5
+#define HCI_3_SLOT_EDR_ESCO_SUPPORTED(x) ((x)[HCI_FEATURE_3_SLOT_EDR_ESCO_OFF] & HCI_FEATURE_3_SLOT_EDR_ESCO_MASK)
+
+#define HCI_FEATURE_EXT_INQ_RSP_MASK    0x01
+#define HCI_FEATURE_EXT_INQ_RSP_OFF     6
+#define HCI_EXT_INQ_RSP_SUPPORTED(x)    ((x)[HCI_FEATURE_EXT_INQ_RSP_OFF] & HCI_FEATURE_EXT_INQ_RSP_MASK)
+
+#define HCI_FEATURE_ANUM_PIN_AWARE_MASK 0x02
+#define HCI_FEATURE_ANUM_PIN_AWARE_OFF  6
+#define HCI_ANUM_PIN_AWARE_SUPPORTED(x) ((x)[HCI_FEATURE_ANUM_PIN_AWARE_OFF] & HCI_FEATURE_ANUM_PIN_AWARE_MASK)
+
+#define HCI_FEATURE_ANUM_PIN_CAP_MASK   0x04
+#define HCI_FEATURE_ANUM_PIN_CAP_OFF    6
+#define HCI_ANUM_PIN_CAP_SUPPORTED(x)   ((x)[HCI_FEATURE_ANUM_PIN_CAP_OFF] & HCI_FEATURE_ANUM_PIN_CAP_MASK)
+
+#define HCI_FEATURE_SIMPLE_PAIRING_MASK 0x08
+#define HCI_FEATURE_SIMPLE_PAIRING_OFF  6
+#define HCI_SIMPLE_PAIRING_SUPPORTED(x) ((x)[HCI_FEATURE_SIMPLE_PAIRING_OFF] & HCI_FEATURE_SIMPLE_PAIRING_MASK)
+
+#define HCI_FEATURE_ENCAP_PDU_MASK      0x10
+#define HCI_FEATURE_ENCAP_PDU_OFF       6
+#define HCI_ENCAP_PDU_SUPPORTED(x)      ((x)[HCI_FEATURE_ENCAP_PDU_OFF] & HCI_FEATURE_ENCAP_PDU_MASK)
+
+#define HCI_FEATURE_ERROR_DATA_MASK     0x20
+#define HCI_FEATURE_ERROR_DATA_OFF      6
+#define HCI_ERROR_DATA_SUPPORTED(x)     ((x)[HCI_FEATURE_ERROR_DATA_OFF] & HCI_FEATURE_ERROR_DATA_MASK)
+
+#define HCI_FEATURE_NON_FLUSHABLE_PB_MASK      0x40
+#define HCI_FEATURE_NON_FLUSHABLE_PB_OFF       6
+
+// btla-specific ++
+#ifdef ANDROID_APP_INCLUDED
+/* This feature is causing frequent link drops when doing call switch with certain av/hfp headsets */
+#define HCI_NON_FLUSHABLE_PB_SUPPORTED(x)      (0)//((x)[HCI_FEATURE_NON_FLUSHABLE_PB_OFF] & HCI_FEATURE_NON_FLUSHABLE_PB_MASK)
+#else
+#define HCI_NON_FLUSHABLE_PB_SUPPORTED(x)      ((x)[HCI_FEATURE_NON_FLUSHABLE_PB_OFF] & HCI_FEATURE_NON_FLUSHABLE_PB_MASK)
+#endif
+// btla-specific --
+
+#define HCI_FEATURE_LINK_SUP_TO_EVT_MASK 0x01
+#define HCI_FEATURE_LINK_SUP_TO_EVT_OFF  7
+#define HCI_LINK_SUP_TO_EVT_SUPPORTED(x) ((x)[HCI_FEATURE_LINK_SUP_TO_EVT_OFF] & HCI_FEATURE_LINK_SUP_TO_EVT_MASK)
+
+#define HCI_FEATURE_INQ_RESP_TX_MASK     0x02
+#define HCI_FEATURE_INQ_RESP_TX_OFF      7
+#define HCI_INQ_RESP_TX_SUPPORTED(x)     ((x)[HCI_FEATURE_INQ_RESP_TX_OFF] & HCI_FEATURE_INQ_RESP_TX_MASK)
+
+#define HCI_FEATURE_EXTENDED_MASK       0x80
+#define HCI_FEATURE_EXTENDED_OFF        7
+#define HCI_LMP_EXTENDED_SUPPORTED(x)   ((x)[HCI_FEATURE_EXTENDED_OFF] & HCI_FEATURE_EXTENDED_MASK)
+
+/*
+**   Features encoding - page 1
+*/
+#define HCI_EXT_FEATURE_SSP_HOST_MASK 0x01
+#define HCI_EXT_FEATURE_SSP_HOST_OFF  0
+#define HCI_SSP_HOST_SUPPORTED(x) ((x)[HCI_EXT_FEATURE_SSP_HOST_OFF] & HCI_EXT_FEATURE_SSP_HOST_MASK)
+
+/*
+**   Local Supported Commands encoding
+*/
+#define HCI_NUM_SUPP_COMMANDS_BYTES           64
+
+#define HCI_SUPP_COMMANDS_INQUIRY_MASK 0x01
+#define HCI_SUPP_COMMANDS_INQUIRY_OFF  0
+#define HCI_INQUIRY_SUPPORTED(x) ((x)[HCI_SUPP_COMMANDS_INQUIRY_OFF] & HCI_SUPP_COMMANDS_INQUIRY_MASK)
+
+#define HCI_SUPP_COMMANDS_INQUIRY_CANCEL_MASK 0x02
+#define HCI_SUPP_COMMANDS_INQUIRY_CANCEL_OFF  0
+#define HCI_INQUIRY_CANCEL_SUPPORTED(x) ((x)[HCI_SUPP_COMMANDS_INQUIRY_CANCEL_OFF] & HCI_SUPP_COMMANDS_INQUIRY_CANCEL_MASK)
+
+#define HCI_SUPP_COMMANDS_PERIODIC_INQUIRY_MASK     0x04
+#define HCI_SUPP_COMMANDS_PERIODIC_INQUIRY_OFF      0
+#define HCI_PERIODIC_INQUIRY_SUPPORTED(x)     ((x)[HCI_SUPP_COMMANDS_PERIODIC_INQUIRY_OFF] & HCI_SUPP_COMMANDS_PERIODIC_INQUIRY_MASK)
+
+#define HCI_SUPP_COMMANDS_EXIT_PERIODIC_INQUIRY_MASK    0x08
+#define HCI_SUPP_COMMANDS_EXIT_PERIODIC_INQUIRY_OFF     0
+#define HCI_EXIT_PERIODIC_INQUIRY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_EXIT_PERIODIC_INQUIRY_OFF] & HCI_SUPP_COMMANDS_EXIT_PERIODIC_INQUIRY_MASK)
+
+#define HCI_SUPP_COMMANDS_CREATE_CONN_MASK     0x10
+#define HCI_SUPP_COMMANDS_CREATE_CONN_OFF      0
+#define HCI_CREATE_CONN_SUPPORTED(x)     ((x)[HCI_SUPP_COMMANDS_CREATE_CONN_OFF] & HCI_SUPP_COMMANDS_CREATE_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_DISCONNECT_MASK         0x20
+#define HCI_SUPP_COMMANDS_DISCONNECT_OFF          0
+#define HCI_DISCONNECT_SUPPORTED(x)         ((x)[HCI_SUPP_COMMANDS_DISCONNECT_OFF] & HCI_SUPP_COMMANDS_DISCONNECT_MASK)
+
+#define HCI_SUPP_COMMANDS_ADD_SCO_CONN_MASK      0x40
+#define HCI_SUPP_COMMANDS_ADD_SCO_CONN_OFF       0
+#define HCI_ADD_SCO_CONN_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_ADD_SCO_CONN_OFF] & HCI_SUPP_COMMANDS_ADD_SCO_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_CANCEL_CREATE_CONN_MASK     0x80
+#define HCI_SUPP_COMMANDS_CANCEL_CREATE_CONN_OFF      0
+#define HCI_CANCEL_CREATE_CONN_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_CANCEL_CREATE_CONN_OFF] & HCI_SUPP_COMMANDS_CANCEL_CREATE_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_ACCEPT_CONN_REQUEST_MASK      0x01
+#define HCI_SUPP_COMMANDS_ACCEPT_CONN_REQUEST_OFF       1
+#define HCI_ACCEPT_CONN_REQUEST_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_ACCEPT_CONN_REQUEST_OFF] & HCI_SUPP_COMMANDS_ACCEPT_CONN_REQUEST_MASK)
+
+#define HCI_SUPP_COMMANDS_REJECT_CONN_REQUEST_MASK           0x02
+#define HCI_SUPP_COMMANDS_REJECT_CONN_REQUEST_OFF            1
+#define HCI_REJECT_CONN_REQUEST_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_REJECT_CONN_REQUEST_OFF] & HCI_SUPP_COMMANDS_REJECT_CONN_REQUEST_MASK)
+
+#define HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_REPLY_MASK  0x04
+#define HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_REPLY_OFF   1
+#define HCI_LINK_KEY_REQUEST_REPLY_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_REPLY_OFF] & HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_NEG_REPLY_MASK       0x08
+#define HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_NEG_REPLY_OFF        1
+#define HCI_LINK_KEY_REQUEST_NEG_REPLY_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_LINK_KEY_REQUEST_NEG_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_REPLY_MASK    0x10
+#define HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_REPLY_OFF     1
+#define HCI_PIN_CODE_REQUEST_REPLY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_REPLY_OFF] & HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_NEG_REPLY_MASK    0x20
+#define HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_NEG_REPLY_OFF     1
+#define HCI_PIN_CODE_REQUEST_NEG_REPLY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_PIN_CODE_REQUEST_NEG_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_CHANGE_CONN_PKT_TYPE_MASK          0x40
+#define HCI_SUPP_COMMANDS_CHANGE_CONN_PKT_TYPE_OFF           1
+#define HCI_CHANGE_CONN_PKT_TYPE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_CHANGE_CONN_PKT_TYPE_OFF] & HCI_SUPP_COMMANDS_CHANGE_CONN_PKT_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_AUTH_REQUEST_MASK          0x80
+#define HCI_SUPP_COMMANDS_AUTH_REQUEST_OFF           1
+#define HCI_AUTH_REQUEST_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_AUTH_REQUEST_OFF] & HCI_SUPP_COMMANDS_AUTH_REQUEST_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_CONN_ENCRYPTION_MASK      0x01
+#define HCI_SUPP_COMMANDS_SET_CONN_ENCRYPTION_OFF       2
+#define HCI_SET_CONN_ENCRYPTION_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_SET_CONN_ENCRYPTION_OFF] & HCI_SUPP_COMMANDS_SET_CONN_ENCRYPTION_MASK)
+
+#define HCI_SUPP_COMMANDS_CHANGE_CONN_LINK_KEY_MASK           0x02
+#define HCI_SUPP_COMMANDS_CHANGE_CONN_LINK_KEY_OFF            2
+#define HCI_CHANGE_CONN_LINK_KEY_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_CHANGE_CONN_LINK_KEY_OFF] & HCI_SUPP_COMMANDS_CHANGE_CONN_LINK_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_MASTER_LINK_KEY_MASK  0x04
+#define HCI_SUPP_COMMANDS_MASTER_LINK_KEY_OFF   2
+#define HCI_MASTER_LINK_KEY_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_MASTER_LINK_KEY_OFF] & HCI_SUPP_COMMANDS_MASTER_LINK_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_REMOTE_NAME_REQUEST_MASK       0x08
+#define HCI_SUPP_COMMANDS_REMOTE_NAME_REQUEST_OFF        2
+#define HCI_REMOTE_NAME_REQUEST_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_REMOTE_NAME_REQUEST_OFF] & HCI_SUPP_COMMANDS_REMOTE_NAME_REQUEST_MASK)
+
+#define HCI_SUPP_COMMANDS_CANCEL_REMOTE_NAME_REQUEST_MASK    0x10
+#define HCI_SUPP_COMMANDS_CANCEL_REMOTE_NAME_REQUEST_OFF     2
+#define HCI_CANCEL_REMOTE_NAME_REQUEST_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_CANCEL_REMOTE_NAME_REQUEST_OFF] & HCI_SUPP_COMMANDS_CANCEL_REMOTE_NAME_REQUEST_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_REMOTE_SUPP_FEATURES_MASK    0x20
+#define HCI_SUPP_COMMANDS_READ_REMOTE_SUPP_FEATURES_OFF     2
+#define HCI_READ_REMOTE_SUPP_FEATURES_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_REMOTE_SUPP_FEATURES_OFF] & HCI_SUPP_COMMANDS_READ_REMOTE_SUPP_FEATURES_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_REMOTE_EXT_FEATURES_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_REMOTE_EXT_FEATURES_OFF           2
+#define HCI_READ_REMOTE_EXT_FEATURES_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_REMOTE_EXT_FEATURES_OFF] & HCI_SUPP_COMMANDS_READ_REMOTE_EXT_FEATURES_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_REMOTE_VER_INFO_MASK          0x80
+#define HCI_SUPP_COMMANDS_READ_REMOTE_VER_INFO_OFF           2
+#define HCI_READ_REMOTE_VER_INFO_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_REMOTE_VER_INFO_OFF] & HCI_SUPP_COMMANDS_READ_REMOTE_VER_INFO_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_CLOCK_OFFSET_MASK           0x01
+#define HCI_SUPP_COMMANDS_READ_CLOCK_OFFSET_OFF            3
+#define HCI_READ_CLOCK_OFFSET_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_CLOCK_OFFSET_OFF] & HCI_SUPP_COMMANDS_READ_CLOCK_OFFSET_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LMP_HANDLE_MASK  0x02
+#define HCI_SUPP_COMMANDS_READ_LMP_HANDLE_OFF   3
+#define HCI_READ_LMP_HANDLE_SUPPORTED(x) ((x)[HCI_SUPP_COMMANDS_READ_LMP_HANDLE_OFF] & HCI_SUPP_COMMANDS_READ_LMP_HANDLE_MASK)
+
+#define HCI_SUPP_COMMANDS_HOLD_MODE_CMD_MASK           0x02
+#define HCI_SUPP_COMMANDS_HOLD_MODE_CMD_OFF            4
+#define HCI_HOLD_MODE_CMD_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_HOLD_MODE_CMD_OFF] & HCI_SUPP_COMMANDS_HOLD_MODE_CMD_MASK)
+
+#define HCI_SUPP_COMMANDS_SNIFF_MODE_CMD_MASK  0x04
+#define HCI_SUPP_COMMANDS_SNIFF_MODE_CMD_OFF   4
+#define HCI_SNIFF_MODE_CMD_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_SNIFF_MODE_CMD_OFF] & HCI_SUPP_COMMANDS_SNIFF_MODE_CMD_MASK)
+
+#define HCI_SUPP_COMMANDS_EXIT_SNIFF_MODE_MASK       0x08
+#define HCI_SUPP_COMMANDS_EXIT_SNIFF_MODE_OFF        4
+#define HCI_EXIT_SNIFF_MODE_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_EXIT_SNIFF_MODE_OFF] & HCI_SUPP_COMMANDS_EXIT_SNIFF_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_PARK_STATE_MASK    0x10
+#define HCI_SUPP_COMMANDS_PARK_STATE_OFF     4
+#define HCI_PARK_STATE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_PARK_STATE_OFF] & HCI_SUPP_COMMANDS_PARK_STATE_MASK)
+
+#define HCI_SUPP_COMMANDS_EXIT_PARK_STATE_MASK    0x20
+#define HCI_SUPP_COMMANDS_EXIT_PARK_STATE_OFF     4
+#define HCI_EXIT_PARK_STATE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_EXIT_PARK_STATE_OFF] & HCI_SUPP_COMMANDS_EXIT_PARK_STATE_MASK)
+
+#define HCI_SUPP_COMMANDS_QOS_SETUP_MASK          0x40
+#define HCI_SUPP_COMMANDS_QOS_SETUP_OFF           4
+#define HCI_QOS_SETUP_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_QOS_SETUP_OFF] & HCI_SUPP_COMMANDS_QOS_SETUP_MASK)
+
+#define HCI_SUPP_COMMANDS_ROLE_DISCOVERY_MASK          0x80
+#define HCI_SUPP_COMMANDS_ROLE_DISCOVERY_OFF           4
+#define HCI_ROLE_DISCOVERY_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_ROLE_DISCOVERY_OFF] & HCI_SUPP_COMMANDS_ROLE_DISCOVERY_MASK)
+
+#define HCI_SUPP_COMMANDS_SWITCH_ROLE_MASK      0x01
+#define HCI_SUPP_COMMANDS_SWITCH_ROLE_OFF       5
+#define HCI_SWITCH_ROLE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_SWITCH_ROLE_OFF] & HCI_SUPP_COMMANDS_SWITCH_ROLE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LINK_POLICY_SET_MASK           0x02
+#define HCI_SUPP_COMMANDS_READ_LINK_POLICY_SET_OFF            5
+#define HCI_READ_LINK_POLICY_SET_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_READ_LINK_POLICY_SET_OFF] & HCI_SUPP_COMMANDS_READ_LINK_POLICY_SET_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LINK_POLICY_SET_MASK  0x04
+#define HCI_SUPP_COMMANDS_WRITE_LINK_POLICY_SET_OFF   5
+#define HCI_WRITE_LINK_POLICY_SET_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_WRITE_LINK_POLICY_SET_OFF] & HCI_SUPP_COMMANDS_WRITE_LINK_POLICY_SET_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_DEF_LINK_POLICY_SET_MASK       0x08
+#define HCI_SUPP_COMMANDS_READ_DEF_LINK_POLICY_SET_OFF        5
+#define HCI_READ_DEF_LINK_POLICY_SET_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_DEF_LINK_POLICY_SET_OFF] & HCI_SUPP_COMMANDS_READ_DEF_LINK_POLICY_SET_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_DEF_LINK_POLICY_SET_MASK    0x10
+#define HCI_SUPP_COMMANDS_WRITE_DEF_LINK_POLICY_SET_OFF     5
+#define HCI_WRITE_DEF_LINK_POLICY_SET_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_DEF_LINK_POLICY_SET_OFF] & HCI_SUPP_COMMANDS_WRITE_DEF_LINK_POLICY_SET_MASK)
+
+#define HCI_SUPP_COMMANDS_FLOW_SPECIFICATION_MASK    0x20
+#define HCI_SUPP_COMMANDS_FLOW_SPECIFICATION_OFF     5
+#define HCI_FLOW_SPECIFICATION_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_FLOW_SPECIFICATION_OFF] & HCI_SUPP_COMMANDS_FLOW_SPECIFICATION_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_EVENT_MASK_MASK          0x40
+#define HCI_SUPP_COMMANDS_SET_EVENT_MASK_OFF           5
+#define HCI_SET_EVENT_MASK_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_SET_EVENT_MASK_OFF] & HCI_SUPP_COMMANDS_SET_EVENT_MASK_MASK)
+
+#define HCI_SUPP_COMMANDS_RESET_MASK          0x80
+#define HCI_SUPP_COMMANDS_RESET_OFF           5
+#define HCI_RESET_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_RESET_OFF] & HCI_SUPP_COMMANDS_RESET_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_EVENT_FILTER_MASK      0x01
+#define HCI_SUPP_COMMANDS_SET_EVENT_FILTER_OFF       6
+#define HCI_SET_EVENT_FILTER_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_SET_EVENT_FILTER_OFF] & HCI_SUPP_COMMANDS_SET_EVENT_FILTER_MASK)
+
+#define HCI_SUPP_COMMANDS_FLUSH_MASK           0x02
+#define HCI_SUPP_COMMANDS_FLUSH_OFF            6
+#define HCI_FLUSH_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_FLUSH_OFF] & HCI_SUPP_COMMANDS_FLUSH_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PIN_TYPE_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_PIN_TYPE_OFF   6
+#define HCI_READ_PIN_TYPE_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_PIN_TYPE_OFF] & HCI_SUPP_COMMANDS_READ_PIN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PIN_TYPE_MASK       0x08
+#define HCI_SUPP_COMMANDS_WRITE_PIN_TYPE_OFF        6
+#define HCI_WRITE_PIN_TYPE_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_WRITE_PIN_TYPE_OFF] & HCI_SUPP_COMMANDS_WRITE_PIN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_CREATE_NEW_UNIT_KEY_MASK    0x10
+#define HCI_SUPP_COMMANDS_CREATE_NEW_UNIT_KEY_OFF     6
+#define HCI_CREATE_NEW_UNIT_KEY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_CREATE_NEW_UNIT_KEY_OFF] & HCI_SUPP_COMMANDS_CREATE_NEW_UNIT_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_STORED_LINK_KEY_MASK    0x20
+#define HCI_SUPP_COMMANDS_READ_STORED_LINK_KEY_OFF     6
+#define HCI_READ_STORED_LINK_KEY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_STORED_LINK_KEY_OFF] & HCI_SUPP_COMMANDS_READ_STORED_LINK_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_STORED_LINK_KEY_MASK          0x40
+#define HCI_SUPP_COMMANDS_WRITE_STORED_LINK_KEY_OFF           6
+#define HCI_WRITE_STORED_LINK_KEY_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_STORED_LINK_KEY_OFF] & HCI_SUPP_COMMANDS_WRITE_STORED_LINK_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_DELETE_STORED_LINK_KEY_MASK          0x80
+#define HCI_SUPP_COMMANDS_DELETE_STORED_LINK_KEY_OFF           6
+#define HCI_DELETE_STORED_LINK_KEY_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_DELETE_STORED_LINK_KEY_OFF] & HCI_SUPP_COMMANDS_DELETE_STORED_LINK_KEY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LOCAL_NAME_MASK      0x01
+#define HCI_SUPP_COMMANDS_WRITE_LOCAL_NAME_OFF       7
+#define HCI_WRITE_LOCAL_NAME_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_LOCAL_NAME_OFF] & HCI_SUPP_COMMANDS_WRITE_LOCAL_NAME_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_NAME_MASK           0x02
+#define HCI_SUPP_COMMANDS_READ_LOCAL_NAME_OFF            7
+#define HCI_READ_LOCAL_NAME_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_NAME_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_NAME_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_CONN_ACCEPT_TOUT_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_CONN_ACCEPT_TOUT_OFF   7
+#define HCI_READ_CONN_ACCEPT_TOUT_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_CONN_ACCEPT_TOUT_OFF] & HCI_SUPP_COMMANDS_READ_CONN_ACCEPT_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_CONN_ACCEPT_TOUT_MASK       0x08
+#define HCI_SUPP_COMMANDS_WRITE_CONN_ACCEPT_TOUT_OFF        7
+#define HCI_WRITE_CONN_ACCEPT_TOUT_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_WRITE_CONN_ACCEPT_TOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_CONN_ACCEPT_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PAGE_TOUT_MASK    0x10
+#define HCI_SUPP_COMMANDS_READ_PAGE_TOUT_OFF     7
+#define HCI_READ_PAGE_TOUT_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_PAGE_TOUT_OFF] & HCI_SUPP_COMMANDS_READ_PAGE_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_TOUT_MASK    0x20
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_TOUT_OFF     7
+#define HCI_WRITE_PAGE_TOUT_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_PAGE_TOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_PAGE_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_SCAN_ENABLE_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_SCAN_ENABLE_OFF           7
+#define HCI_READ_SCAN_ENABLE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_SCAN_ENABLE_OFF] & HCI_SUPP_COMMANDS_READ_SCAN_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_SCAN_ENABLE_MASK          0x80
+#define HCI_SUPP_COMMANDS_WRITE_SCAN_ENABLE_OFF           7
+#define HCI_WRITE_SCAN_ENABLE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_SCAN_ENABLE_OFF] & HCI_SUPP_COMMANDS_WRITE_SCAN_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_ACTIVITY_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_ACTIVITY_OFF       8
+#define HCI_READ_PAGE_SCAN_ACTIVITY_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_PAGE_SCAN_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_READ_PAGE_SCAN_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_ACTIVITY_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_ACTIVITY_OFF            8
+#define HCI_WRITE_PAGE_SCAN_ACTIVITY_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_INQURIY_SCAN_ACTIVITY_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_INQURIY_SCAN_ACTIVITY_OFF   8
+#define HCI_READ_INQURIY_SCAN_ACTIVITY_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_INQURIY_SCAN_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_READ_INQURIY_SCAN_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_INQURIY_SCAN_ACTIVITY_MASK       0x08
+#define HCI_SUPP_COMMANDS_WRITE_INQURIY_SCAN_ACTIVITY_OFF        8
+#define HCI_WRITE_INQURIY_SCAN_ACTIVITY_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_WRITE_INQURIY_SCAN_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_WRITE_INQURIY_SCAN_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_AUTH_ENABLE_MASK    0x10
+#define HCI_SUPP_COMMANDS_READ_AUTH_ENABLE_OFF     8
+#define HCI_READ_AUTH_ENABLE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_AUTH_ENABLE_OFF] & HCI_SUPP_COMMANDS_READ_AUTH_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_AUTH_ENABLE_MASK    0x20
+#define HCI_SUPP_COMMANDS_WRITE_AUTH_ENABLE_OFF     8
+#define HCI_WRITE_AUTH_ENABLE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_AUTH_ENABLE_OFF] & HCI_SUPP_COMMANDS_WRITE_AUTH_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_ENCRYPT_ENABLE_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_ENCRYPT_ENABLE_OFF           8
+#define HCI_READ_ENCRYPT_ENABLE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_ENCRYPT_ENABLE_OFF] & HCI_SUPP_COMMANDS_READ_ENCRYPT_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_ENCRYPT_ENABLE_MASK          0x80
+#define HCI_SUPP_COMMANDS_WRITE_ENCRYPT_ENABLE_OFF           8
+#define HCI_WRITE_ENCRYPT_ENABLE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_ENCRYPT_ENABLE_OFF] & HCI_SUPP_COMMANDS_WRITE_ENCRYPT_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_CLASS_DEVICE_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_CLASS_DEVICE_OFF       9
+#define HCI_READ_CLASS_DEVICE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_CLASS_DEVICE_OFF] & HCI_SUPP_COMMANDS_READ_CLASS_DEVICE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_CLASS_DEVICE_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_CLASS_DEVICE_OFF            9
+#define HCI_WRITE_CLASS_DEVICE_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_CLASS_DEVICE_OFF] & HCI_SUPP_COMMANDS_WRITE_CLASS_DEVICE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_VOICE_SETTING_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_VOICE_SETTING_OFF   9
+#define HCI_READ_VOICE_SETTING_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_VOICE_SETTING_OFF] & HCI_SUPP_COMMANDS_READ_VOICE_SETTING_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_VOICE_SETTING_MASK       0x08
+#define HCI_SUPP_COMMANDS_WRITE_VOICE_SETTING_OFF        9
+#define HCI_WRITE_VOICE_SETTING_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_WRITE_VOICE_SETTING_OFF] & HCI_SUPP_COMMANDS_WRITE_VOICE_SETTING_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_AUTO_FLUSH_TOUT_MASK    0x10
+#define HCI_SUPP_COMMANDS_READ_AUTO_FLUSH_TOUT_OFF     9
+#define HCI_READ_AUTO_FLUSH_TOUT_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_AUTO_FLUSH_TOUT_OFF] & HCI_SUPP_COMMANDS_READ_AUTO_FLUSH_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_AUTO_FLUSH_TOUT_MASK    0x20
+#define HCI_SUPP_COMMANDS_WRITE_AUTO_FLUSH_TOUT_OFF     9
+#define HCI_WRITE_AUTO_FLUSH_TOUT_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_AUTO_FLUSH_TOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_AUTO_FLUSH_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_NUM_BROAD_RETRANS_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_NUM_BROAD_RETRANS_OFF           9
+#define HCI_READ_NUM_BROAD_RETRANS_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_NUM_BROAD_RETRANS_OFF] & HCI_SUPP_COMMANDS_READ_NUM_BROAD_RETRANS_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_NUM_BROAD_RETRANS_MASK          0x80
+#define HCI_SUPP_COMMANDS_WRITE_NUM_BROAD_RETRANS_OFF           9
+#define HCI_WRITE_NUM_BROAD_RETRANS_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_NUM_BROAD_RETRANS_OFF] & HCI_SUPP_COMMANDS_WRITE_NUM_BROAD_RETRANS_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_HOLD_MODE_ACTIVITY_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_HOLD_MODE_ACTIVITY_OFF       10
+#define HCI_READ_HOLD_MODE_ACTIVITY_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_HOLD_MODE_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_READ_HOLD_MODE_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_HOLD_MODE_ACTIVITY_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_HOLD_MODE_ACTIVITY_OFF            10
+#define HCI_WRITE_HOLD_MODE_ACTIVITY_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_HOLD_MODE_ACTIVITY_OFF] & HCI_SUPP_COMMANDS_WRITE_HOLD_MODE_ACTIVITY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_TRANS_PWR_LEVEL_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_TRANS_PWR_LEVEL_OFF   10
+#define HCI_READ_TRANS_PWR_LEVEL_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_TRANS_PWR_LEVEL_OFF] & HCI_SUPP_COMMANDS_READ_TRANS_PWR_LEVEL_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_SYNCH_FLOW_CTRL_ENABLE_MASK       0x08
+#define HCI_SUPP_COMMANDS_READ_SYNCH_FLOW_CTRL_ENABLE_OFF        10
+#define HCI_READ_SYNCH_FLOW_CTRL_ENABLE_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_SYNCH_FLOW_CTRL_ENABLE_OFF] & HCI_SUPP_COMMANDS_READ_SYNCH_FLOW_CTRL_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_SYNCH_FLOW_CTRL_ENABLE_MASK    0x10
+#define HCI_SUPP_COMMANDS_WRITE_SYNCH_FLOW_CTRL_ENABLE_OFF     10
+#define HCI_WRITE_SYNCH_FLOW_CTRL_ENABLE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_SYNCH_FLOW_CTRL_ENABLE_OFF] & HCI_SUPP_COMMANDS_WRITE_SYNCH_FLOW_CTRL_ENABLE_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_HOST_CTRLR_TO_HOST_FC_MASK    0x20
+#define HCI_SUPP_COMMANDS_SET_HOST_CTRLR_TO_HOST_FC_OFF     10
+#define HCI_SET_HOST_CTRLR_TO_HOST_FC_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_SET_HOST_CTRLR_TO_HOST_FC_OFF] & HCI_SUPP_COMMANDS_SET_HOST_CTRLR_TO_HOST_FC_MASK)
+
+#define HCI_SUPP_COMMANDS_HOST_BUFFER_SIZE_MASK          0x40
+#define HCI_SUPP_COMMANDS_HOST_BUFFER_SIZE_OFF           10
+#define HCI_HOST_BUFFER_SIZE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_HOST_BUFFER_SIZE_OFF] & HCI_SUPP_COMMANDS_HOST_BUFFER_SIZE_MASK)
+
+#define HCI_SUPP_COMMANDS_HOST_NUM_COMPLETED_PKTS_MASK          0x80
+#define HCI_SUPP_COMMANDS_HOST_NUM_COMPLETED_PKTS_OFF           10
+#define HCI_HOST_NUM_COMPLETED_PKTS_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_HOST_NUM_COMPLETED_PKTS_OFF] & HCI_SUPP_COMMANDS_HOST_NUM_COMPLETED_PKTS_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LINK_SUP_TOUT_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_LINK_SUP_TOUT_OFF       11
+#define HCI_READ_LINK_SUP_TOUT_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_LINK_SUP_TOUT_OFF] & HCI_SUPP_COMMANDS_READ_LINK_SUP_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LINK_SUP_TOUT_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_LINK_SUP_TOUT_OFF            11
+#define HCI_WRITE_LINK_SUP_TOUT_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_LINK_SUP_TOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_LINK_SUP_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_NUM_SUPP_IAC_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_NUM_SUPP_IAC_OFF   11
+#define HCI_READ_NUM_SUPP_IAC_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_NUM_SUPP_IAC_OFF] & HCI_SUPP_COMMANDS_READ_NUM_SUPP_IAC_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_CURRENT_IAC_LAP_MASK       0x08
+#define HCI_SUPP_COMMANDS_READ_CURRENT_IAC_LAP_OFF        11
+#define HCI_READ_CURRENT_IAC_LAP_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_CURRENT_IAC_LAP_OFF] & HCI_SUPP_COMMANDS_READ_CURRENT_IAC_LAP_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_CURRENT_IAC_LAP_MASK    0x10
+#define HCI_SUPP_COMMANDS_WRITE_CURRENT_IAC_LAP_OFF     11
+#define HCI_WRITE_CURRENT_IAC_LAP_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_CURRENT_IAC_LAP_OFF] & HCI_SUPP_COMMANDS_WRITE_CURRENT_IAC_LAP_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_PER_MODE_MASK    0x20
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_PER_MODE_OFF     11
+#define HCI_READ_PAGE_SCAN_PER_MODE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_PAGE_SCAN_PER_MODE_OFF] & HCI_SUPP_COMMANDS_READ_PAGE_SCAN_PER_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_PER_MODE_MASK          0x40
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_PER_MODE_OFF           11
+#define HCI_WRITE_PAGE_SCAN_PER_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_PER_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_PER_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_MODE_MASK          0x80
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_MODE_OFF           11
+#define HCI_READ_PAGE_SCAN_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_PAGE_SCAN_MODE_OFF] & HCI_SUPP_COMMANDS_READ_PAGE_SCAN_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_MODE_MASK      0x01
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_MODE_OFF       12
+#define HCI_WRITE_PAGE_SCAN_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_AFH_CHNL_CLASS_MASK           0x02
+#define HCI_SUPP_COMMANDS_SET_AFH_CHNL_CLASS_OFF            12
+#define HCI_SET_AFH_CHNL_CLASS_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_SET_AFH_CHNL_CLASS_OFF] & HCI_SUPP_COMMANDS_SET_AFH_CHNL_CLASS_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_SCAN_TYPE_MASK    0x10
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_SCAN_TYPE_OFF     12
+#define HCI_READ_INQUIRY_SCAN_TYPE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_INQUIRY_SCAN_TYPE_OFF] & HCI_SUPP_COMMANDS_READ_INQUIRY_SCAN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_SCAN_TYPE_MASK    0x20
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_SCAN_TYPE_OFF     12
+#define HCI_WRITE_INQUIRY_SCAN_TYPE_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_WRITE_INQUIRY_SCAN_TYPE_OFF] & HCI_SUPP_COMMANDS_WRITE_INQUIRY_SCAN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_MODE_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_MODE_OFF           12
+#define HCI_READ_INQUIRY_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_INQUIRY_MODE_OFF] & HCI_SUPP_COMMANDS_READ_INQUIRY_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_MODE_MASK          0x80
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_MODE_OFF           12
+#define HCI_WRITE_INQUIRY_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_WRITE_INQUIRY_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_INQUIRY_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_TYPE_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_PAGE_SCAN_TYPE_OFF       13
+#define HCI_READ_PAGE_SCAN_TYPE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_PAGE_SCAN_TYPE_OFF] & HCI_SUPP_COMMANDS_READ_PAGE_SCAN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_TYPE_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_TYPE_OFF            13
+#define HCI_WRITE_PAGE_SCAN_TYPE_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_TYPE_OFF] & HCI_SUPP_COMMANDS_WRITE_PAGE_SCAN_TYPE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_AFH_CHNL_ASSESS_MODE_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_AFH_CHNL_ASSESS_MODE_OFF   13
+#define HCI_READ_AFH_CHNL_ASSESS_MODE_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_AFH_CHNL_ASSESS_MODE_OFF] & HCI_SUPP_COMMANDS_READ_AFH_CHNL_ASSESS_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_AFH_CHNL_ASSESS_MODE_MASK       0x08
+#define HCI_SUPP_COMMANDS_WRITE_AFH_CHNL_ASSESS_MODE_OFF        13
+#define HCI_WRITE_AFH_CHNL_ASSESS_MODE_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_WRITE_AFH_CHNL_ASSESS_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_AFH_CHNL_ASSESS_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_VER_INFO_MASK       0x08
+#define HCI_SUPP_COMMANDS_READ_LOCAL_VER_INFO_OFF        14
+#define HCI_READ_LOCAL_VER_INFO_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_VER_INFO_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_VER_INFO_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_SUP_CMDS_MASK       0x10
+#define HCI_SUPP_COMMANDS_READ_LOCAL_SUP_CMDS_OFF        14
+#define HCI_READ_LOCAL_SUP_CMDS_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_SUP_CMDS_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_SUP_CMDS_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_SUPP_FEATURES_MASK    0x20
+#define HCI_SUPP_COMMANDS_READ_LOCAL_SUPP_FEATURES_OFF     14
+#define HCI_READ_LOCAL_SUPP_FEATURES_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_SUPP_FEATURES_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_SUPP_FEATURES_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_EXT_FEATURES_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_LOCAL_EXT_FEATURES_OFF           14
+#define HCI_READ_LOCAL_EXT_FEATURES_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_EXT_FEATURES_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_EXT_FEATURES_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_BUFFER_SIZE_MASK          0x80
+#define HCI_SUPP_COMMANDS_READ_BUFFER_SIZE_OFF           14
+#define HCI_READ_BUFFER_SIZE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_BUFFER_SIZE_OFF] & HCI_SUPP_COMMANDS_READ_BUFFER_SIZE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_COUNTRY_CODE_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_COUNTRY_CODE_OFF       15
+#define HCI_READ_COUNTRY_CODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_COUNTRY_CODE_OFF] & HCI_SUPP_COMMANDS_READ_COUNTRY_CODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_BD_ADDR_MASK           0x02
+#define HCI_SUPP_COMMANDS_READ_BD_ADDR_OFF            15
+#define HCI_READ_BD_ADDR_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_READ_BD_ADDR_OFF] & HCI_SUPP_COMMANDS_READ_BD_ADDR_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_FAIL_CONTACT_CNTR_MASK  0x04
+#define HCI_SUPP_COMMANDS_READ_FAIL_CONTACT_CNTR_OFF   15
+#define HCI_READ_FAIL_CONTACT_CNTR_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_READ_FAIL_CONTACT_CNTR_OFF] & HCI_SUPP_COMMANDS_READ_FAIL_CONTACT_CNTR_MASK)
+
+#define HCI_SUPP_COMMANDS_RESET_FAIL_CONTACT_CNTR_MASK       0x08
+#define HCI_SUPP_COMMANDS_RESET_FAIL_CONTACT_CNTR_OFF        15
+#define HCI_RESET_FAIL_CONTACT_CNTR_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_RESET_FAIL_CONTACT_CNTR_OFF] & HCI_SUPP_COMMANDS_RESET_FAIL_CONTACT_CNTR_MASK)
+
+#define HCI_SUPP_COMMANDS_GET_LINK_QUALITY_MASK    0x10
+#define HCI_SUPP_COMMANDS_GET_LINK_QUALITY_OFF     15
+#define HCI_GET_LINK_QUALITY_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_GET_LINK_QUALITY_OFF] & HCI_SUPP_COMMANDS_GET_LINK_QUALITY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_RSSI_MASK    0x20
+#define HCI_SUPP_COMMANDS_READ_RSSI_OFF     15
+#define HCI_READ_RSSI_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_READ_RSSI_OFF] & HCI_SUPP_COMMANDS_READ_RSSI_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_AFH_CH_MAP_MASK          0x40
+#define HCI_SUPP_COMMANDS_READ_AFH_CH_MAP_OFF           15
+#define HCI_READ_AFH_CH_MAP_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_AFH_CH_MAP_OFF] & HCI_SUPP_COMMANDS_READ_AFH_CH_MAP_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_BD_CLOCK_MASK          0x80
+#define HCI_SUPP_COMMANDS_READ_BD_CLOCK_OFF           15
+#define HCI_READ_BD_CLOCK_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_BD_CLOCK_OFF] & HCI_SUPP_COMMANDS_READ_BD_CLOCK_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOOPBACK_MODE_MASK      0x01
+#define HCI_SUPP_COMMANDS_READ_LOOPBACK_MODE_OFF       16
+#define HCI_READ_LOOPBACK_MODE_SUPPORTED(x)      ((x)[HCI_SUPP_COMMANDS_READ_LOOPBACK_MODE_OFF] & HCI_SUPP_COMMANDS_READ_LOOPBACK_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LOOPBACK_MODE_MASK           0x02
+#define HCI_SUPP_COMMANDS_WRITE_LOOPBACK_MODE_OFF            16
+#define HCI_WRITE_LOOPBACK_MODE_SUPPORTED(x)           ((x)[HCI_SUPP_COMMANDS_WRITE_LOOPBACK_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_LOOPBACK_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_ENABLE_DEV_UNDER_TEST_MASK  0x04
+#define HCI_SUPP_COMMANDS_ENABLE_DEV_UNDER_TEST_OFF   16
+#define HCI_ENABLE_DEV_UNDER_TEST_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_ENABLE_DEV_UNDER_TEST_OFF] & HCI_SUPP_COMMANDS_ENABLE_DEV_UNDER_TEST_MASK)
+
+#define HCI_SUPP_COMMANDS_SETUP_SYNCH_CONN_MASK       0x08
+#define HCI_SUPP_COMMANDS_SETUP_SYNCH_CONN_OFF        16
+#define HCI_SETUP_SYNCH_CONN_SUPPORTED(x)       ((x)[HCI_SUPP_COMMANDS_SETUP_SYNCH_CONN_OFF] & HCI_SUPP_COMMANDS_SETUP_SYNCH_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_ACCEPT_SYNCH_CONN_MASK    0x10
+#define HCI_SUPP_COMMANDS_ACCEPT_SYNCH_CONN_OFF     16
+#define HCI_ACCEPT_SYNCH_CONN_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_ACCEPT_SYNCH_CONN_OFF] & HCI_SUPP_COMMANDS_ACCEPT_SYNCH_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_REJECT_SYNCH_CONN_MASK    0x20
+#define HCI_SUPP_COMMANDS_REJECT_SYNCH_CONN_OFF     16
+#define HCI_REJECT_SYNCH_CONN_SUPPORTED(x)    ((x)[HCI_SUPP_COMMANDS_REJECT_SYNCH_CONN_OFF] & HCI_SUPP_COMMANDS_REJECT_SYNCH_CONN_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_EXT_INQUIRY_RESP_MASK   0x01
+#define HCI_SUPP_COMMANDS_READ_EXT_INQUIRY_RESP_OFF    17
+#define HCI_READ_EXT_INQUIRY_RESP_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_EXT_INQUIRY_RESP_OFF] & HCI_SUPP_COMMANDS_READ_EXT_INQUIRY_RESP_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_EXT_INQUIRY_RESP_MASK  0x02
+#define HCI_SUPP_COMMANDS_WRITE_EXT_INQUIRY_RESP_OFF   17
+#define HCI_WRITE_EXT_INQUIRY_RESP_SUPPORTED(x)  ((x)[HCI_SUPP_COMMANDS_WRITE_EXT_INQUIRY_RESP_OFF] & HCI_SUPP_COMMANDS_WRITE_EXT_INQUIRY_RESP_MASK)
+
+#define HCI_SUPP_COMMANDS_REFRESH_ENCRYPTION_KEY_MASK   0x04
+#define HCI_SUPP_COMMANDS_REFRESH_ENCRYPTION_KEY_OFF    17
+#define HCI_REFRESH_ENCRYPTION_KEY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_REFRESH_ENCRYPTION_KEY_OFF] & HCI_SUPP_COMMANDS_REFRESH_ENCRYPTION_KEY_MASK)
+
+/* Octet 17, bit 3 is reserved */
+
+#define HCI_SUPP_COMMANDS_SNIFF_SUB_RATE_MASK       0x10
+#define HCI_SUPP_COMMANDS_SNIFF_SUB_RATE_OFF        17
+#define HCI_SNIFF_SUB_RATE_CMD_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_SNIFF_SUB_RATE_OFF] & HCI_SUPP_COMMANDS_SNIFF_SUB_RATE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_SIMPLE_PAIRING_MODE_MASK   0x20
+#define HCI_SUPP_COMMANDS_READ_SIMPLE_PAIRING_MODE_OFF    17
+#define HCI_READ_SIMPLE_PAIRING_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_SIMPLE_PAIRING_MODE_OFF] & HCI_SUPP_COMMANDS_READ_SIMPLE_PAIRING_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_MODE_MASK   0x40
+#define HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_MODE_OFF    17
+#define HCI_WRITE_SIMPLE_PAIRING_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_OOB_DATA_MASK   0x80
+#define HCI_SUPP_COMMANDS_READ_LOCAL_OOB_DATA_OFF    17
+#define HCI_READ_LOCAL_OOB_DATA_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_OOB_DATA_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_OOB_DATA_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_RESPONSE_TX_POWER_MASK   0x01
+#define HCI_SUPP_COMMANDS_READ_INQUIRY_RESPONSE_TX_POWER_OFF    18
+#define HCI_READ_INQUIRY_RESPONSE_TX_POWER_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_INQUIRY_RESPONSE_TX_POWER_OFF] & HCI_SUPP_COMMANDS_READ_INQUIRY_RESPONSE_TX_POWER_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_RESPONSE_TX_POWER_MASK   0x02
+#define HCI_SUPP_COMMANDS_WRITE_INQUIRY_RESPONSE_TX_POWER_OFF    18
+#define HCI_WRITE_INQUIRY_RESPONSE_TX_POWER_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_INQUIRY_RESPONSE_TX_POWER_OFF] & HCI_SUPP_COMMANDS_WRITE_INQUIRY_RESPONSE_TX_POWER_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_DEFAULT_ERRONEOUS_DATA_REPORTING_MASK   0x04
+#define HCI_SUPP_COMMANDS_READ_DEFAULT_ERRONEOUS_DATA_REPORTING_OFF    18
+#define HCI_READ_DEFAULT_ERRONEOUS_DATA_REPORTING_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_DEFAULT_ERRONEOUS_DATA_REPORTING_OFF] & HCI_SUPP_COMMANDS_READ_DEFAULT_ERRONEOUS_DATA_REPORTING_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING_MASK   0x08
+#define HCI_SUPP_COMMANDS_WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING_OFF    18
+#define HCI_WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING_OFF] & HCI_SUPP_COMMANDS_WRITE_DEFAULT_ERRONEOUS_DATA_REPORTING_MASK)
+
+#define HCI_SUPP_COMMANDS_IO_CAPABILITY_RESPONSE_MASK   0x80
+#define HCI_SUPP_COMMANDS_IO_CAPABILITY_RESPONSE_OFF    18
+#define HCI_IO_CAPABILITY_RESPONSE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_IO_CAPABILITY_RESPONSE_OFF] & HCI_SUPP_COMMANDS_IO_CAPABILITY_RESPONSE_MASK)
+
+#define HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_REPLY_MASK   0x01
+#define HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_REPLY_OFF    19
+#define HCI_USER_CONFIRMATION_REQUEST_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_REPLY_OFF] & HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_NEG_REPLY_MASK   0x02
+#define HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_NEG_REPLY_OFF    19
+#define HCI_USER_CONFIRMATION_REQUEST_NEG_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_USER_CONFIRMATION_REQUEST_NEG_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_REPLY_MASK   0x04
+#define HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_REPLY_OFF    19
+#define HCI_USER_PASSKEY_REQUEST_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_REPLY_OFF] & HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_NEG_REPLY_MASK   0x08
+#define HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_NEG_REPLY_OFF    19
+#define HCI_USER_PASSKEY_REQUEST_NEG_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_USER_PASSKEY_REQUEST_NEG_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_REPLY_MASK   0x10
+#define HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_REPLY_OFF    19
+#define HCI_REMOTE_OOB_DATA_REQUEST_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_REPLY_OFF] & HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_DBG_MODE_MASK       0x20
+#define HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_DBG_MODE_OFF        19
+#define HCI_WRITE_SIMPLE_PAIRING_DBG_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_DBG_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_SIMPLE_PAIRING_DBG_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_ENHANCED_FLUSH_MASK   0x40
+#define HCI_SUPP_COMMANDS_ENHANCED_FLUSH_OFF    19
+#define HCI_ENHANCED_FLUSH_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_ENHANCED_FLUSH_OFF] & HCI_SUPP_COMMANDS_ENHANCED_FLUSH_MASK)
+
+#define HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_NEG_REPLY_MASK       0x80
+#define HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_NEG_REPLY_OFF        19
+#define HCI_REMOTE_OOB_DATA_REQUEST_NEG_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_REMOTE_OOB_DATA_REQUEST_NEG_REPLY_MASK)
+
+/* Supported Commands (Byte 20) */
+#define HCI_SUPP_COMMANDS_SEND_KEYPRESS_NOTIF_MASK       0x04
+#define HCI_SUPP_COMMANDS_SEND_KEYPRESS_NOTIF_OFF        20
+#define HCI_SEND_NOTIF_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_SEND_KEYPRESS_NOTIF_OFF] & HCI_SUPP_COMMANDS_SEND_KEYPRESS_NOTIF_MASK)
+
+#define HCI_SUPP_COMMANDS_IO_CAP_REQ_NEG_REPLY_MASK      0x08
+#define HCI_SUPP_COMMANDS_IO_CAP_REQ_NEG_REPLY_OFF       20
+#define HCI_IO_CAP_REQ_NEG_REPLY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_IO_CAP_REQ_NEG_REPLY_OFF] & HCI_SUPP_COMMANDS_IO_CAP_REQ_NEG_REPLY_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_ENCR_KEY_SIZE_MASK      0x10
+#define HCI_SUPP_COMMANDS_READ_ENCR_KEY_SIZE_OFF       20
+#define HCI_READ_ENCR_KEY_SIZE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_ENCR_KEY_SIZE_OFF] & HCI_SUPP_COMMANDS_READ_ENCR_KEY_SIZE_MASK)
+
+/* Supported Commands (Byte 21) */
+#define HCI_SUPP_COMMANDS_CREATE_PHYSICAL_LINK_MASK   0x01
+#define HCI_SUPP_COMMANDS_CREATE_PHYSICAL_LINK_OFF    21
+#define HCI_CREATE_PHYSICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_CREATE_PHYSICAL_LINK_OFF] & HCI_SUPP_COMMANDS_CREATE_PHYSICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_ACCEPT_PHYSICAL_LINK_MASK   0x02
+#define HCI_SUPP_COMMANDS_ACCEPT_PHYSICAL_LINK_OFF    21
+#define HCI_ACCEPT_PHYSICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_ACCEPT_PHYSICAL_LINK_OFF] & HCI_SUPP_COMMANDS_ACCEPT_PHYSICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_DISCONNECT_PHYSICAL_LINK_MASK   0x04
+#define HCI_SUPP_COMMANDS_DISCONNECT_PHYSICAL_LINK_OFF    21
+#define HCI_DISCONNECT_PHYSICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_DISCONNECT_PHYSICAL_LINK_OFF] & HCI_SUPP_COMMANDS_DISCONNECT_PHYSICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_CREATE_LOGICAL_LINK_MASK   0x08
+#define HCI_SUPP_COMMANDS_CREATE_LOGICAL_LINK_OFF    21
+#define HCI_CREATE_LOGICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_CREATE_LOGICAL_LINK_OFF] & HCI_SUPP_COMMANDS_CREATE_LOGICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_ACCEPT_LOGICAL_LINK_MASK   0x10
+#define HCI_SUPP_COMMANDS_ACCEPT_LOGICAL_LINK_OFF    21
+#define HCI_ACCEPT_LOGICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_ACCEPT_LOGICAL_LINK_OFF] & HCI_SUPP_COMMANDS_ACCEPT_LOGICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_DISCONNECT_LOGICAL_LINK_MASK   0x20
+#define HCI_SUPP_COMMANDS_DISCONNECT_LOGICAL_LINK_OFF    21
+#define HCI_DISCONNECT_LOGICAL_LINK_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_DISCONNECT_LOGICAL_LINK_OFF] & HCI_SUPP_COMMANDS_DISCONNECT_LOGICAL_LINK_MASK)
+
+#define HCI_SUPP_COMMANDS_LOGICAL_LINK_CANCEL_MASK   0x40
+#define HCI_SUPP_COMMANDS_LOGICAL_LINK_CANCEL_OFF    21
+#define HCI_LOGICAL_LINK_CANCEL_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_LOGICAL_LINK_CANCEL_OFF] & HCI_SUPP_COMMANDS_LOGICAL_LINK_CANCEL_MASK)
+
+#define HCI_SUPP_COMMANDS_FLOW_SPEC_MODIFY_MASK       0x80
+#define HCI_SUPP_COMMANDS_FLOW_SPEC_MODIFY_OFF        21
+#define HCI_FLOW_SPEC_MODIFY_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_FLOW_SPEC_MODIFY_OFF] & HCI_SUPP_COMMANDS_FLOW_SPEC_MODIFY_MASK)
+
+/* Supported Commands (Byte 22) */
+#define HCI_SUPP_COMMANDS_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_MASK   0x01
+#define HCI_SUPP_COMMANDS_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_OFF    22
+#define HCI_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_OFF] & HCI_SUPP_COMMANDS_READ_LOGICAL_LINK_ACCEPT_TIMEOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_MASK   0x02
+#define HCI_SUPP_COMMANDS_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_OFF    22
+#define HCI_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_SET_EVENT_MASK_PAGE_2_MASK   0x04
+#define HCI_SUPP_COMMANDS_SET_EVENT_MASK_PAGE_2_OFF    22
+#define HCI_SET_EVENT_MASK_PAGE_2_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_SET_EVENT_MASK_PAGE_2_OFF] & HCI_SUPP_COMMANDS_SET_EVENT_MASK_PAGE_2_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCATION_DATA_MASK   0x08
+#define HCI_SUPP_COMMANDS_READ_LOCATION_DATA_OFF    22
+#define HCI_READ_LOCATION_DATA_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_LOCATION_DATA_OFF] & HCI_SUPP_COMMANDS_READ_LOCATION_DATA_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_LOCATION_DATA_MASK   0x10
+#define HCI_SUPP_COMMANDS_WRITE_LOCATION_DATA_OFF    22
+#define HCI_WRITE_LOCATION_DATA_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_LOCATION_DATA_OFF] & HCI_SUPP_COMMANDS_WRITE_LOCATION_DATA_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_AMP_INFO_MASK   0x20
+#define HCI_SUPP_COMMANDS_READ_LOCAL_AMP_INFO_OFF    22
+#define HCI_READ_LOCAL_AMP_INFO_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_AMP_INFO_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_AMP_INFO_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_LOCAL_AMP_ASSOC_MASK   0x40
+#define HCI_SUPP_COMMANDS_READ_LOCAL_AMP_ASSOC_OFF    22
+#define HCI_READ_LOCAL_AMP_ASSOC_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_LOCAL_AMP_ASSOC_OFF] & HCI_SUPP_COMMANDS_READ_LOCAL_AMP_ASSOC_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_REMOTE_AMP_ASSOC_MASK   0x80
+#define HCI_SUPP_COMMANDS_WRITE_REMOTE_AMP_ASSOC_OFF    22
+#define HCI_WRITE_REMOTE_AMP_ASSOC_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_REMOTE_AMP_ASSOC_OFF] & HCI_SUPP_COMMANDS_WRITE_REMOTE_AMP_ASSOC_MASK)
+
+/* Supported Commands (Byte 23) */
+#define HCI_SUPP_COMMANDS_READ_FLOW_CONTROL_MODE_MASK   0x01
+#define HCI_SUPP_COMMANDS_READ_FLOW_CONTROL_MODE_OFF    23
+#define HCI_READ_FLOW_CONTROL_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_FLOW_CONTROL_MODE_OFF] & HCI_SUPP_COMMANDS_READ_FLOW_CONTROL_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_FLOW_CONTROL_MODE_MASK   0x02
+#define HCI_SUPP_COMMANDS_WRITE_FLOW_CONTROL_MODE_OFF    23
+#define HCI_WRITE_FLOW_CONTROL_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_FLOW_CONTROL_MODE_OFF] & HCI_SUPP_COMMANDS_WRITE_FLOW_CONTROL_MODE_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_DATA_BLOCK_SIZE_MASK   0x04
+#define HCI_SUPP_COMMANDS_READ_DATA_BLOCK_SIZE_OFF    23
+#define HCI_READ_DATA_BLOCK_SIZE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_DATA_BLOCK_SIZE_OFF] & HCI_SUPP_COMMANDS_READ_DATA_BLOCK_SIZE_MASK)
+
+#define HCI_SUPP_COMMANDS_ENABLE_AMP_RCVR_REPORTS_MASK   0x20
+#define HCI_SUPP_COMMANDS_ENABLE_AMP_RCVR_REPORTS_OFF    23
+#define HCI_ENABLE_AMP_RCVR_REPORTS_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_ENABLE_AMP_RCVR_REPORTS_OFF] & HCI_SUPP_COMMANDS_ENABLE_AMP_RCVR_REPORTS_MASK)
+
+#define HCI_SUPP_COMMANDS_AMP_TEST_END_MASK   0x40
+#define HCI_SUPP_COMMANDS_AMP_TEST_END_OFF    23
+#define HCI_AMP_TEST_END_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_AMP_TEST_END_OFF] & HCI_SUPP_COMMANDS_AMP_TEST_END_MASK)
+
+#define HCI_SUPP_COMMANDS_AMP_TEST_MASK   0x80
+#define HCI_SUPP_COMMANDS_AMP_TEST_OFF    23
+#define HCI_AMP_TEST_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_AMP_TEST_OFF] & HCI_SUPP_COMMANDS_AMP_TEST_MASK)
+
+/* Supported Commands (Byte 24) */
+#define HCI_SUPP_COMMANDS_READ_TRANSMIT_POWER_LEVEL_MASK   0x01
+#define HCI_SUPP_COMMANDS_READ_TRANSMIT_POWER_LEVEL_OFF    24
+#define HCI_READ_TRANSMIT_POWER_LEVEL_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_TRANSMIT_POWER_LEVEL_OFF] & HCI_SUPP_COMMANDS_READ_TRANSMIT_POWER_LEVEL_MASK)
+
+#define HCI_SUPP_COMMANDS_READ_BE_FLUSH_TOUT_MASK   0x04
+#define HCI_SUPP_COMMANDS_READ_BE_FLUSH_TOUT_OFF    24
+#define HCI_READ_BE_FLUSH_TOUT_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_READ_BE_FLUSH_TOUT_OFF] & HCI_SUPP_COMMANDS_READ_BE_FLUSH_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_WRITE_BE_FLUSH_TOUT_MASK   0x08
+#define HCI_SUPP_COMMANDS_WRITE_BE_FLUSH_TOUT_OFF    24
+#define HCI_WRITE_BE_FLUSH_TOUT_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_WRITE_BE_FLUSH_TOUT_OFF] & HCI_SUPP_COMMANDS_WRITE_BE_FLUSH_TOUT_MASK)
+
+#define HCI_SUPP_COMMANDS_SHORT_RANGE_MODE_MASK   0x10
+#define HCI_SUPP_COMMANDS_SHORT_RANGE_MODE_OFF    24
+#define HCI_SHORT_RANGE_MODE_SUPPORTED(x)   ((x)[HCI_SUPP_COMMANDS_SHORT_RANGE_MODE_OFF] & HCI_SUPP_COMMANDS_SHORT_RANGE_MODE_MASK)
+
+/* LE commands TBD
+** Supported Commands (Byte 24 continued)
+** Supported Commands (Byte 25)
+** Supported Commands (Byte 26)
+** Supported Commands (Byte 27)
+** Supported Commands (Byte 28)
+*/
+
+/*
+Commands of HCI_GRP_VENDOR_SPECIFIC group for WIDCOMM SW LM Simulator
+*/
+#ifdef _WIDCOMM
+
+#define HCI_SET_HCI_TRACE               (0x0001 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_SET_LM_TRACE                (0x0002 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_WRITE_COUNTRY_CODE          (0x0004 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_READ_LM_HISTORY             (0x0005 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_WRITE_BD_ADDR               (0x0006 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DISABLE_ENCRYPTION          (0x0007 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DISABLE_AUTHENTICATION      (0x0008 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_GENERIC_LC_CMD              (0x000A | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_INCR_POWER                  (0x000B | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DECR_POWER                  (0x000C | HCI_GRP_VENDOR_SPECIFIC)
+
+/* Definitions for the local transactions */
+#define LM_DISCONNECT                  (0x00D0 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_AUTHENTICATION_REQUESTED    (0x00D1 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_SET_CONN_ENCRYPTION         (0x00D2 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_START_ENCRYPT_KEY_SIZE      (0x00D3 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_START_ENCRYPTION            (0x00D4 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_STOP_ENCRYPTION             (0x00D5 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_CHANGE_CONN_PACKET_TYPE     (0x00D6 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_RMT_NAME_REQUEST            (0x00D7 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_READ_RMT_FEATURES           (0x00D8 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_READ_RMT_VERSION_INFO       (0x00D9 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_READ_RMT_TIMING_INFO        (0x00DA | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_READ_RMT_CLOCK_OFFSET       (0x00DB | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HOLD_MODE                   (0x00DC | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_EXIT_PARK_MODE              (0x00DD | HCI_GRP_VENDOR_SPECIFIC)
+
+#define LM_SCO_LINK_REQUEST            (0x00E0 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_SCO_CHANGE                  (0x00E4 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_SCO_REMOVE                  (0x00E8 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_MAX_SLOTS                   (0x00F1 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_MAX_SLOTS_REQUEST           (0x00F2 | HCI_GRP_VENDOR_SPECIFIC)
+
+#ifdef INCLUDE_OPTIONAL_PAGING_SCHEME
+#define LM_OPTIONAL_PAGE_REQUEST       (0x00F3 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_OPTIONAL_PAGESCAN_REQUEST   (0x00F4 | HCI_GRP_VENDOR_SPECIFIC)
+#endif
+
+#define LM_SETUP_COMPLETE              (0x00FF | HCI_GRP_VENDOR_SPECIFIC)
+
+#define LM_HIST_SEND_LMP_FRAME         (0x0100 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_RECV_LMP_FRAME         (0x0101 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_HCIT_ERROR             (0x0102 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_PER_INQ_TOUT           (0x0103 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_INQ_SCAN_TOUT          (0x0104 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_PAGE_SCAN_TOUT         (0x0105 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_RESET_TOUT             (0x0106 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_MANDAT_PSCAN_TOUT      (0x0107 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_START_TRANS        (0x0108 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_HOST_REPLY         (0x0109 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_TIMEOUT            (0x010A | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_TX_COMP            (0x010B | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_HCID_SUSPENDED     (0x010C | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_ACL_FAILED             (0x010D | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_HCI_COMMAND            (0x010E | HCI_GRP_VENDOR_SPECIFIC)
+
+#define LM_HIST_HCI_EVENT              (0x010F | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_HCI_UPDATA             (0x0110 | HCI_GRP_VENDOR_SPECIFIC)
+#define LM_HIST_HCI_DNDATA             (0x0111 | HCI_GRP_VENDOR_SPECIFIC)
+
+#define HCI_ENTER_TEST_MODE            (0x0300 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_LMP_TEST_CNTRL             (0x0301 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DEBUG_LC_CMD_MIN           (0x0300 | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DEBUG_LC_CMD_MAX           (0x03FF | HCI_GRP_VENDOR_SPECIFIC)
+#define HCI_DEBUG_LC_COMMAND           HCI_DEBUG_LC_CMD_MAX
+
+#endif
+
+
+/* AMP VSE events
+*/
+#define AMP_VSE_CHANSPEC_CHAN_MASK      0x00ff
+
+#define AMP_VSE_CHANSPEC_CTL_SB_MASK    0x0300
+#define AMP_VSE_CHANSPEC_CTL_SB_LOWER   0x0100
+#define AMP_VSE_CHANSPEC_CTL_SB_UPPER   0x0200
+#define AMP_VSE_CHANSPEC_CTL_SB_NONE    0x0300
+
+#define AMP_VSE_CHANSPEC_BW_MASK        0x0C00
+#define AMP_VSE_CHANSPEC_BW_10          0x0400
+#define AMP_VSE_CHANSPEC_BW_20          0x0800
+#define AMP_VSE_CHANSPEC_BW_40          0x0C00
+
+#define AMP_VSE_CHANSPEC_BAND_MASK      0xf000
+#define AMP_VSE_CHANSPEC_BAND_5G        0x1000
+#define AMP_VSE_CHANSPEC_BAND_2G        0x2000
+
+
+#endif
+
diff --git a/stack/include/hcimsgs.h b/stack/include/hcimsgs.h
new file mode 100644
index 0000000..3a23dbe
--- /dev/null
+++ b/stack/include/hcimsgs.h
@@ -0,0 +1,1331 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef HCIMSGS_H
+#define HCIMSGS_H
+
+#include "bt_target.h"
+#include "hcidefs.h"
+#include "bt_types.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Message by message.... */
+
+#define HCIC_GET_UINT8(p, off)    (UINT8)(*((UINT8 *)((p) + 1) + p->offset + 3 + (off)))
+
+#define HCIC_GET_UINT16(p, off)  (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \
+                                          (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8)))
+
+#define HCIC_GET_UINT32(p, off)  (UINT32)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \
+                                          (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8) + \
+                                          (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 2) << 16) + \
+                                          (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 3) << 24)))
+
+#define HCIC_GET_ARRAY(p, off, x, len) \
+{ \
+    UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x; \
+    int ii; for (ii = 0; ii < len; ii++) *rr++ = *qq++; \
+}
+
+#define HCIC_GET_ARRAY16(p, off, x) \
+{ \
+    UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + 15; \
+    int ii; for (ii = 0; ii < 16; ii++) *rr-- = *qq++; \
+}
+
+#define HCIC_GET_BDADDR(p, off, x) \
+{ \
+    UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + BD_ADDR_LEN - 1; \
+    int ii; for (ii = 0; ii < BD_ADDR_LEN; ii++) *rr-- = *qq++; \
+}
+
+#define HCIC_GET_DEVCLASS(p, off, x) \
+{ \
+    UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + DEV_CLASS_LEN - 1; \
+    int ii; for (ii = 0; ii < DEV_CLASS_LEN; ii++) *rr-- = *qq++; \
+}
+
+#define HCIC_GET_LAP(p, off, x) \
+{ \
+    UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + LAP_LEN - 1; \
+    int ii; for (ii = 0; ii < LAP_LEN; ii++) *rr-- = *qq++; \
+}
+
+#define HCIC_GET_POINTER(p, off) ((UINT8 *)((p) + 1) + p->offset + 3 + (off))
+
+
+HCI_API extern BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration,
+                                          UINT8 response_cnt);
+
+#define HCIC_PARAM_SIZE_INQUIRY 5
+
+
+#define HCIC_INQ_INQ_LAP_OFF    0
+#define HCIC_INQ_DUR_OFF        3
+#define HCIC_INQ_RSP_CNT_OFF    4
+                                                                    /* Inquiry */
+
+                                                                    /* Inquiry Cancel */
+HCI_API extern BOOLEAN btsnd_hcic_inq_cancel(void);
+
+#define HCIC_PARAM_SIZE_INQ_CANCEL   0
+
+                                                                    /* Periodic Inquiry Mode */
+HCI_API extern BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period,
+                                               const LAP inq_lap, UINT8 duration,
+                                               UINT8 response_cnt);
+
+#define HCIC_PARAM_SIZE_PER_INQ_MODE    9
+
+#define HCI_PER_INQ_MAX_INTRVL_OFF  0
+#define HCI_PER_INQ_MIN_INTRVL_OFF  2
+#define HCI_PER_INQ_INQ_LAP_OFF     4
+#define HCI_PER_INQ_DURATION_OFF    7
+#define HCI_PER_INQ_RSP_CNT_OFF     8
+                                                                    /* Periodic Inquiry Mode */
+
+                                                                    /* Exit Periodic Inquiry Mode */
+HCI_API extern BOOLEAN btsnd_hcic_exit_per_inq(void);
+
+#define HCIC_PARAM_SIZE_EXIT_PER_INQ   0
+                                                                    /* Create Connection */
+HCI_API extern BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types,
+                                              UINT8 page_scan_rep_mode,
+                                              UINT8 page_scan_mode,
+                                              UINT16 clock_offset,
+                                              UINT8 allow_switch);
+
+#define HCIC_PARAM_SIZE_CREATE_CONN  13
+
+#define HCIC_CR_CONN_BD_ADDR_OFF        0
+#define HCIC_CR_CONN_PKT_TYPES_OFF      6
+#define HCIC_CR_CONN_REP_MODE_OFF       8
+#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9
+#define HCIC_CR_CONN_CLK_OFF_OFF        10
+#define HCIC_CR_CONN_ALLOW_SWITCH_OFF   12
+                                                                    /* Create Connection */
+
+                                                                    /* Disconnect */
+HCI_API extern BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason);
+
+#define HCIC_PARAM_SIZE_DISCONNECT 3
+
+#define HCI_DISC_HANDLE_OFF             0
+#define HCI_DISC_REASON_OFF             2
+                                                                    /* Disconnect */
+
+#if BTM_SCO_INCLUDED == TRUE
+                                                                    /* Add SCO Connection */
+HCI_API extern BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types);
+#endif /* BTM_SCO_INCLUDED */
+
+#define HCIC_PARAM_SIZE_ADD_SCO_CONN    4
+
+#define HCI_ADD_SCO_HANDLE_OFF          0
+#define HCI_ADD_SCO_PACKET_TYPES_OFF    2
+                                                                    /* Add SCO Connection */
+
+                                                                    /* Create Connection Cancel */
+HCI_API extern BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest);
+
+#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL  6
+
+#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF     0
+                                                                    /* Create Connection Cancel */
+
+                                                                    /* Accept Connection Request */
+HCI_API extern BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role);
+
+#define HCIC_PARAM_SIZE_ACCEPT_CONN     7
+
+#define HCI_ACC_CONN_BD_ADDR_OFF        0
+#define HCI_ACC_CONN_ROLE_OFF           6
+                                                                    /* Accept Connection Request */
+
+                                                                    /* Reject Connection Request */
+HCI_API extern BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason);
+
+#define HCIC_PARAM_SIZE_REJECT_CONN      7
+
+#define HCI_REJ_CONN_BD_ADDR_OFF        0
+#define HCI_REJ_CONN_REASON_OFF         6
+                                                                    /* Reject Connection Request */
+
+                                                                    /* Link Key Request Reply */
+HCI_API extern BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr,
+                                                      LINK_KEY link_key);
+
+#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY   22
+
+#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF  0
+#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6
+                                                                    /* Link Key Request Reply  */
+
+                                                                    /* Link Key Request Neg Reply */
+HCI_API extern BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr);
+
+#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY   6
+
+#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0
+                                                                    /* Link Key Request Neg Reply  */
+
+                                                                    /* PIN Code Request Reply */
+HCI_API extern BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr,
+                                                      UINT8 pin_code_len,
+                                                      PIN_CODE pin_code);
+
+#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY   23
+
+#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF  0
+#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF  6
+#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7
+                                                                    /* PIN Code Request Reply  */
+
+                                                                    /* Link Key Request Neg Reply */
+HCI_API extern BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr);
+
+#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY   6
+
+#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0
+                                                                    /* Link Key Request Neg Reply  */
+
+                                                                    /* Change Connection Type */
+HCI_API extern BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types);
+
+#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE     4
+
+#define HCI_CHNG_PKT_TYPE_HANDLE_OFF    0
+#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF  2
+                                                                    /* Change Connection Type */
+
+#define HCIC_PARAM_SIZE_CMD_HANDLE      2
+
+#define HCI_CMD_HANDLE_HANDLE_OFF       0
+
+HCI_API extern BOOLEAN btsnd_hcic_auth_request (UINT16 handle);     /* Authentication Request */
+
+                                                                    /* Set Connection Encryption */
+HCI_API extern BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable);
+#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT     3
+
+
+#define HCI_SET_ENCRYPT_HANDLE_OFF      0
+#define HCI_SET_ENCRYPT_ENABLE_OFF      2
+                                                                    /* Set Connection Encryption */
+
+HCI_API extern BOOLEAN btsnd_hcic_change_link_key (UINT16 handle);  /* Change Connection Link Key */
+
+                                                                    /* Master Link Key */
+HCI_API extern BOOLEAN btsnd_hcic_master_link_key (BOOLEAN key_flag);
+
+#define HCIC_PARAM_SIZE_MASTER_LINK_KEY 1
+
+#define HCI_MASTER_KEY_FLAG_OFF         0
+                                                                    /* Master Link Key */
+
+                                                                    /* Remote Name Request */
+HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr,
+                                                UINT8 page_scan_rep_mode,
+                                                UINT8 page_scan_mode,
+                                                UINT16 clock_offset);
+
+#define HCIC_PARAM_SIZE_RMT_NAME_REQ   10
+
+#define HCI_RMT_NAME_BD_ADDR_OFF        0
+#define HCI_RMT_NAME_REP_MODE_OFF       6
+#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7
+#define HCI_RMT_NAME_CLK_OFF_OFF        8
+                                                                    /* Remote Name Request */
+
+                                                                    /* Remote Name Request Cancel */
+HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr);
+
+#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL   6
+
+#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF       0
+                                                                    /* Remote Name Request Cancel */
+
+HCI_API extern BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle);      /* Remote Features Request */
+
+                                                                    /* Remote Extended Features */
+HCI_API extern BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num);
+
+#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES   3
+
+#define HCI_RMT_EXT_FEATURES_HANDLE_OFF    0
+#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF  2
+                                                                    /* Remote Extended Features */
+
+
+                                                                    /* Local Extended Features */
+HCI_API extern BOOLEAN btsnd_hcic_read_local_ext_features (UINT8 page_num);
+
+#define HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES     1
+
+#define HCI_LOCAL_EXT_FEATURES_PAGE_NUM_OFF    0
+                                                                    /* Local Extended Features */
+
+
+HCI_API extern BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle);           /* Remote Version Info Request */
+HCI_API extern BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle);   /* Remote Clock Offset */
+HCI_API extern BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle);       /* Remote LMP Handle */
+
+HCI_API extern BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle,
+                                                   UINT32 tx_bw, UINT32 rx_bw,
+                                                   UINT16 max_latency, UINT16 voice,
+                                                   UINT8 retrans_effort,
+                                                   UINT16 packet_types);
+#define HCIC_PARAM_SIZE_SETUP_ESCO      17
+
+#define HCI_SETUP_ESCO_HANDLE_OFF       0
+#define HCI_SETUP_ESCO_TX_BW_OFF        2
+#define HCI_SETUP_ESCO_RX_BW_OFF        6
+#define HCI_SETUP_ESCO_MAX_LAT_OFF      10
+#define HCI_SETUP_ESCO_VOICE_OFF        12
+#define HCI_SETUP_ESCO_RETRAN_EFF_OFF   14
+#define HCI_SETUP_ESCO_PKT_TYPES_OFF    15
+
+
+HCI_API extern BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr,
+                                                    UINT32 tx_bw, UINT32 rx_bw,
+                                                    UINT16 max_latency,
+                                                    UINT16 content_fmt,
+                                                    UINT8 retrans_effort,
+                                                    UINT16 packet_types);
+#define HCIC_PARAM_SIZE_ACCEPT_ESCO     21
+
+#define HCI_ACCEPT_ESCO_BDADDR_OFF      0
+#define HCI_ACCEPT_ESCO_TX_BW_OFF       6
+#define HCI_ACCEPT_ESCO_RX_BW_OFF       10
+#define HCI_ACCEPT_ESCO_MAX_LAT_OFF     14
+#define HCI_ACCEPT_ESCO_VOICE_OFF       16
+#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF  18
+#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF   19
+
+
+HCI_API extern BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason);
+#define HCIC_PARAM_SIZE_REJECT_ESCO     7
+
+#define HCI_REJECT_ESCO_BDADDR_OFF      0
+#define HCI_REJECT_ESCO_REASON_OFF      6
+
+/* Hold Mode */
+HCI_API extern BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period,
+                                            UINT16 min_hold_period);
+
+#define HCIC_PARAM_SIZE_HOLD_MODE       6
+
+#define HCI_HOLD_MODE_HANDLE_OFF        0
+#define HCI_HOLD_MODE_MAX_PER_OFF       2
+#define HCI_HOLD_MODE_MIN_PER_OFF       4
+                                                                    /* Hold Mode */
+
+                                                                    /* Sniff Mode */
+HCI_API extern BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle,
+                                             UINT16 max_sniff_period,
+                                             UINT16 min_sniff_period,
+                                             UINT16 sniff_attempt,
+                                             UINT16 sniff_timeout);
+
+#define HCIC_PARAM_SIZE_SNIFF_MODE      10
+
+
+#define HCI_SNIFF_MODE_HANDLE_OFF       0
+#define HCI_SNIFF_MODE_MAX_PER_OFF      2
+#define HCI_SNIFF_MODE_MIN_PER_OFF      4
+#define HCI_SNIFF_MODE_ATTEMPT_OFF      6
+#define HCI_SNIFF_MODE_TIMEOUT_OFF      8
+                                                                    /* Sniff Mode */
+
+HCI_API extern BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle);       /* Exit Sniff Mode */
+
+                                                                    /* Park Mode */
+HCI_API extern BOOLEAN btsnd_hcic_park_mode (UINT16 handle,
+                                             UINT16 beacon_max_interval,
+                                             UINT16 beacon_min_interval);
+
+#define HCIC_PARAM_SIZE_PARK_MODE       6
+
+#define HCI_PARK_MODE_HANDLE_OFF        0
+#define HCI_PARK_MODE_MAX_PER_OFF       2
+#define HCI_PARK_MODE_MIN_PER_OFF       4
+                                                                    /* Park Mode */
+
+HCI_API extern BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle);  /* Exit Park Mode */
+
+                                                                    /* QoS Setup */
+HCI_API extern BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags,
+                                             UINT8 service_type,
+                                             UINT32 token_rate, UINT32 peak,
+                                             UINT32 latency, UINT32 delay_var);
+
+#define HCIC_PARAM_SIZE_QOS_SETUP       20
+
+#define HCI_QOS_HANDLE_OFF              0
+#define HCI_QOS_FLAGS_OFF               2
+#define HCI_QOS_SERVICE_TYPE_OFF        3
+#define HCI_QOS_TOKEN_RATE_OFF          4
+#define HCI_QOS_PEAK_BANDWIDTH_OFF      8
+#define HCI_QOS_LATENCY_OFF             12
+#define HCI_QOS_DELAY_VAR_OFF           16
+                                                                    /* QoS Setup */
+
+HCI_API extern BOOLEAN btsnd_hcic_role_discovery (UINT16 handle);       /* Role Discovery */
+
+                                                                    /* Switch Role Request */
+HCI_API extern BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role);
+
+#define HCIC_PARAM_SIZE_SWITCH_ROLE  7
+
+#define HCI_SWITCH_BD_ADDR_OFF          0
+#define HCI_SWITCH_ROLE_OFF             6
+                                                                    /* Switch Role Request */
+
+HCI_API extern BOOLEAN btsnd_hcic_read_policy_set(UINT16 handle);       /* Read Policy Settings */
+
+                                                                    /* Write Policy Settings */
+HCI_API extern BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings);
+
+#define HCIC_PARAM_SIZE_WRITE_POLICY_SET     4
+
+#define HCI_WRITE_POLICY_HANDLE_OFF          0
+#define HCI_WRITE_POLICY_SETTINGS_OFF        2
+                                                                    /* Write Policy Settings */
+
+                                                                    /* Read Default Policy Settings */
+HCI_API extern BOOLEAN btsnd_hcic_read_def_policy_set(void);
+
+#define HCIC_PARAM_SIZE_READ_DEF_POLICY_SET           0
+                                                                    /* Read Default Policy Settings */
+
+                                                                    /* Write Default Policy Settings */
+HCI_API extern BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings);
+
+#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET     2
+
+#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF        0
+                                                                    /* Write Default Policy Settings */
+
+                                                                    /* Flow Specification */
+HCI_API extern BOOLEAN btsnd_hcic_flow_specification(UINT16 handle, UINT8 flags,
+                                                     UINT8 flow_direct,
+                                                     UINT8 service_type,
+                                                     UINT32 token_rate,
+                                                     UINT32 token_bucket_size,
+                                                     UINT32 peak, UINT32 latency);
+
+#define HCIC_PARAM_SIZE_FLOW_SPEC             21
+
+#define HCI_FLOW_SPEC_HANDLE_OFF              0
+#define HCI_FLOW_SPEC_FLAGS_OFF               2
+#define HCI_FLOW_SPEC_FLOW_DIRECT_OFF         3
+#define HCI_FLOW_SPEC_SERVICE_TYPE_OFF        4
+#define HCI_FLOW_SPEC_TOKEN_RATE_OFF          5
+#define HCI_FLOW_SPEC_TOKEN_BUCKET_SIZE_OFF   9
+#define HCI_FLOW_SPEC_PEAK_BANDWIDTH_OFF      13
+#define HCI_FLOW_SPEC_LATENCY_OFF             17
+                                                                    /* Flow Specification */
+
+/******************************************
+**    Lisbon Features
+*******************************************/
+#if BTM_SSR_INCLUDED == TRUE
+                                                                    /* Sniff Subrating */
+HCI_API extern BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat,
+						                         UINT16 min_remote_lat,
+                                                 UINT16 min_local_lat);
+
+#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE             8
+
+#define HCI_SNIFF_SUB_RATE_HANDLE_OFF              0
+#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF             2
+#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF         4
+#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF         6
+                                                                    /* Sniff Subrating */
+
+#else   /* BTM_SSR_INCLUDED == FALSE */
+
+#define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE
+
+#endif  /* BTM_SSR_INCLUDED */
+
+                                                                    /* Extended Inquiry Response */
+#if (BTM_EIR_SERVER_INCLUDED == TRUE)
+HCI_API extern void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req);
+
+#define HCIC_PARAM_SIZE_EXT_INQ_RESP        241
+
+#define HCIC_EXT_INQ_RESP_FEC_OFF     0
+#define HCIC_EXT_INQ_RESP_RESPONSE    1
+
+HCI_API extern BOOLEAN btsnd_hcic_read_ext_inquiry_response(void);   /* Read Extended Inquiry Response */
+#else
+#define btsnd_hcic_write_ext_inquiry_response(buffer, fec_req)
+#define btsnd_hcic_read_ext_inquiry_response() FALSE
+#endif
+                                                                    /* Write Simple Pairing Mode */
+/**** Simple Pairing Commands ****/
+HCI_API extern BOOLEAN btsnd_hcic_write_simple_pairing_mode(UINT8 mode);
+
+#define HCIC_PARAM_SIZE_W_SIMP_PAIR     1
+
+#define HCIC_WRITE_SP_MODE_OFF          0
+
+
+HCI_API extern BOOLEAN btsnd_hcic_read_simple_pairing_mode (void);
+
+#define HCIC_PARAM_SIZE_R_SIMP_PAIR     0
+
+                                                                    /* Write Simple Pairing Debug Mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_simp_pair_debug_mode(UINT8 debug_mode);
+
+#define HCIC_PARAM_SIZE_SIMP_PAIR_DBUG  1
+
+#define HCIC_WRITE_SP_DBUG_MODE_OFF     0
+
+                                                                    /* IO Capabilities Response */
+HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability,
+                                               UINT8 oob_present, UINT8 auth_req);
+
+#define HCIC_PARAM_SIZE_IO_CAP_RESP     9
+
+#define HCI_IO_CAP_BD_ADDR_OFF          0
+#define HCI_IO_CAPABILITY_OFF           6
+#define HCI_IO_CAP_OOB_DATA_OFF         7
+#define HCI_IO_CAP_AUTH_REQ_OFF         8
+
+                                                                    /* IO Capabilities Req Neg Reply */
+HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code);
+
+#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7
+
+#define HCI_IO_CAP_NR_BD_ADDR_OFF        0
+#define HCI_IO_CAP_NR_ERR_CODE           6
+
+                                                         /* Read Local OOB Data */
+HCI_API extern BOOLEAN btsnd_hcic_read_local_oob_data (void);
+
+#define HCIC_PARAM_SIZE_R_LOCAL_OOB     0
+
+
+HCI_API extern BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes);
+
+#define HCIC_PARAM_SIZE_UCONF_REPLY     6
+
+#define HCI_USER_CONF_BD_ADDR_OFF       0
+
+
+HCI_API extern BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value);
+
+#define HCIC_PARAM_SIZE_U_PKEY_REPLY    10
+
+#define HCI_USER_PASSKEY_BD_ADDR_OFF    0
+#define HCI_USER_PASSKEY_VALUE_OFF      6
+
+
+HCI_API extern BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr);
+
+#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6
+
+#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0
+
+                                                            /* Remote OOB Data Request Reply */
+HCI_API extern BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c,
+                                                 UINT8 *p_r);
+
+#define HCIC_PARAM_SIZE_REM_OOB_REPLY   38
+
+#define HCI_REM_OOB_DATA_BD_ADDR_OFF    0
+#define HCI_REM_OOB_DATA_C_OFF          6
+#define HCI_REM_OOB_DATA_R_OFF          22
+
+                                                            /* Remote OOB Data Request Negative Reply */
+HCI_API extern BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr);
+
+#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY   6
+
+#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF    0
+
+                                                            /* Read Tx Power Level */
+HCI_API extern BOOLEAN btsnd_hcic_read_inq_tx_power (void);
+
+#define HCIC_PARAM_SIZE_R_TX_POWER      0
+
+                                                            /* Write Tx Power Level */
+HCI_API extern BOOLEAN btsnd_hcic_write_inq_tx_power (INT8 level);
+
+#define HCIC_PARAM_SIZE_W_TX_POWER      1
+
+#define HCIC_WRITE_TX_POWER_LEVEL_OFF   0
+                                                            /* Read Default Erroneous Data Reporting */
+HCI_API extern BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void);
+
+#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT      0
+
+                                                            /* Write Default Erroneous Data Reporting */
+HCI_API extern BOOLEAN btsnd_hcic_write_default_erroneous_data_rpt (UINT8 level);
+
+#define HCIC_PARAM_SIZE_W_ERR_DATA_RPT      1
+
+#define HCIC_WRITE_ERR_DATA_RPT_OFF   0
+
+
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+HCI_API extern BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type);
+
+#define HCIC_PARAM_SIZE_ENHANCED_FLUSH  3
+#endif
+
+
+HCI_API extern BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif);
+
+#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF    7
+
+#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF    0
+#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF      6
+
+
+HCI_API extern BOOLEAN btsnd_hcic_refresh_encryption_key(UINT16 handle);       /* Refresh Encryption Key */
+
+/**** end of Simple Pairing Commands ****/
+
+
+HCI_API extern BOOLEAN btsnd_hcic_set_event_mask(UINT8 local_controller_id, BT_EVENT_MASK evt_mask);
+
+#define HCIC_PARAM_SIZE_SET_EVENT_MASK  8
+#define HCI_EVENT_MASK_MASK_OFF         0
+                                                                    /* Set Event Mask */
+
+                                                                    /* Reset */
+HCI_API extern BOOLEAN btsnd_hcic_set_event_mask_page_2 (UINT8 local_controller_id,
+                                                         BT_EVENT_MASK event_mask);
+
+#define HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2   8
+#define HCI_EVENT_MASK_MASK_OFF                 0
+                                                                    /* Set Event Mask Page 2 */
+
+                                                                    /* Reset */
+HCI_API extern BOOLEAN btsnd_hcic_reset(UINT8 local_controller_id);
+
+#define HCIC_PARAM_SIZE_RESET           0
+                                                                    /* Reset */
+
+                                                                    /* Store Current Settings */
+#define MAX_FILT_COND   (sizeof (BD_ADDR) + 1)
+
+HCI_API extern BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type,
+                                                   UINT8 filt_cond_type,
+                                                   UINT8 *filt_cond,
+                                                   UINT8 filt_cond_len);
+
+#define HCIC_PARAM_SIZE_SET_EVT_FILTER  9
+
+#define HCI_FILT_COND_FILT_TYPE_OFF     0
+#define HCI_FILT_COND_COND_TYPE_OFF     1
+#define HCI_FILT_COND_FILT_OFF          2
+                                                                    /* Set Event Filter */
+
+HCI_API extern BOOLEAN btsnd_hcic_flush(UINT8 local_controller_id, UINT16 handle);                 /* Flush */
+
+                                                                    /* Create New Unit Type */
+HCI_API extern BOOLEAN btsnd_hcic_new_unit_key(void);
+
+#define HCIC_PARAM_SIZE_NEW_UNIT_KEY     0
+                                                                    /* Create New Unit Type */
+
+                                                                /* Read Stored Key */
+HCI_API extern BOOLEAN btsnd_hcic_read_stored_key (BD_ADDR bd_addr,
+                                                   BOOLEAN read_all_flag);
+
+#define HCIC_PARAM_SIZE_READ_STORED_KEY 7
+
+#define HCI_READ_KEY_BD_ADDR_OFF        0
+#define HCI_READ_KEY_ALL_FLAG_OFF       6
+                                                                /* Read Stored Key */
+
+#define MAX_WRITE_KEYS 10
+                                                                /* Write Stored Key */
+HCI_API extern BOOLEAN btsnd_hcic_write_stored_key (UINT8 num_keys, BD_ADDR *bd_addr,
+                                                    LINK_KEY *link_key);
+
+#define HCIC_PARAM_SIZE_WRITE_STORED_KEY  sizeof(btmsg_hcic_write_stored_key_t)
+
+#define HCI_WRITE_KEY_NUM_KEYS_OFF          0
+#define HCI_WRITE_KEY_BD_ADDR_OFF           1
+#define HCI_WRITE_KEY_KEY_OFF               7
+/* only 0x0b keys cab be sent in one HCI command */
+#define HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD   0x0b
+                                                                /* Write Stored Key */
+
+                                                                /* Delete Stored Key */
+HCI_API extern BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag);
+
+#define HCIC_PARAM_SIZE_DELETE_STORED_KEY        7
+
+#define HCI_DELETE_KEY_BD_ADDR_OFF      0
+#define HCI_DELETE_KEY_ALL_FLAG_OFF     6
+                                                                /* Delete Stored Key */
+
+                                                                /* Change Local Name */
+HCI_API extern BOOLEAN btsnd_hcic_change_name(BD_NAME name);
+
+#define HCIC_PARAM_SIZE_CHANGE_NAME     BD_NAME_LEN
+
+#define HCI_CHANGE_NAME_NAME_OFF        0
+                                                                /* Change Local Name */
+
+
+#define HCIC_PARAM_SIZE_READ_CMD     0
+
+#define HCIC_PARAM_SIZE_WRITE_PARAM1     1
+
+#define HCIC_WRITE_PARAM1_PARAM_OFF      0
+
+#define HCIC_PARAM_SIZE_WRITE_PARAM2     2
+
+#define HCIC_WRITE_PARAM2_PARAM_OFF      0
+
+#define HCIC_PARAM_SIZE_WRITE_PARAM3     3
+
+#define HCIC_WRITE_PARAM3_PARAM_OFF      0
+
+#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS    10
+
+HCI_API extern BOOLEAN btsnd_hcic_read_pin_type(void);                          /* Read PIN Type */
+HCI_API extern BOOLEAN btsnd_hcic_write_pin_type(UINT8 type);                   /* Write PIN Type */
+HCI_API extern BOOLEAN btsnd_hcic_read_auto_accept(void);                       /* Read Auto Accept */
+HCI_API extern BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag);                /* Write Auto Accept */
+HCI_API extern BOOLEAN btsnd_hcic_read_name (void);                             /* Read Local Name */
+HCI_API extern BOOLEAN btsnd_hcic_read_conn_acc_tout(UINT8 local_controller_id);       /* Read Connection Accept Timout */
+HCI_API extern BOOLEAN btsnd_hcic_write_conn_acc_tout(UINT8 local_controller_id, UINT16 tout); /* Write Connection Accept Timout */
+HCI_API extern BOOLEAN btsnd_hcic_read_page_tout(void);                         /* Read Page Timout */
+HCI_API extern BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout);              /* Write Page Timout */
+HCI_API extern BOOLEAN btsnd_hcic_read_scan_enable(void);                       /* Read Scan Enable */
+HCI_API extern BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag);                /* Write Scan Enable */
+HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_cfg(void);                      /* Read Page Scan Activity */
+
+HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval,
+                                                     UINT16 window);            /* Write Page Scan Activity */
+
+#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG  4
+
+#define HCI_SCAN_CFG_INTERVAL_OFF       0
+#define HCI_SCAN_CFG_WINDOW_OFF         2
+                                                                /* Write Page Scan Activity */
+
+HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_cfg(void);       /* Read Inquiry Scan Activity */
+
+                                                                /* Write Inquiry Scan Activity */
+HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window);
+
+#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG    4
+
+#define HCI_SCAN_CFG_INTERVAL_OFF       0
+#define HCI_SCAN_CFG_WINDOW_OFF         2
+                                                                /* Write Inquiry Scan Activity */
+
+HCI_API extern BOOLEAN btsnd_hcic_read_auth_enable(void);                        /* Read Authentication Enable */
+HCI_API extern BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag);                 /* Write Authentication Enable */
+HCI_API extern BOOLEAN btsnd_hcic_read_encr_mode (void);                         /* Read encryption mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_encr_mode (UINT8 mode);                  /* Write encryption mode */
+HCI_API extern BOOLEAN btsnd_hcic_read_dev_class(void);                          /* Read Class of Device */
+HCI_API extern BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev);                /* Write Class of Device */
+HCI_API extern BOOLEAN btsnd_hcic_read_voice_settings(void);                     /* Read Voice Settings */
+HCI_API extern BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags);            /* Write Voice Settings */
+
+/* Host Controller to Host flow control */
+#define HCI_HOST_FLOW_CTRL_OFF          0
+#define HCI_HOST_FLOW_CTRL_ACL_ON       1
+#define HCI_HOST_FLOW_CTRL_SCO_ON       2
+#define HCI_HOST_FLOW_CTRL_BOTH_ON      3
+
+HCI_API extern BOOLEAN btsnd_hcic_set_host_flow_ctrl (UINT8 value);         /* Enable/disable flow control toward host */
+
+
+HCI_API extern BOOLEAN btsnd_hcic_read_auto_flush_tout(UINT16 handle);      /* Read Retransmit Timout */
+
+HCI_API extern BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle,
+                                                        UINT16 timeout);    /* Write Retransmit Timout */
+
+#define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT    4
+
+#define HCI_FLUSH_TOUT_HANDLE_OFF       0
+#define HCI_FLUSH_TOUT_TOUT_OFF         2
+
+HCI_API extern BOOLEAN btsnd_hcic_read_num_bcast_xmit(void);                    /* Read Num Broadcast Retransmits */
+HCI_API extern BOOLEAN btsnd_hcic_write_num_bcast_xmit(UINT8 num);              /* Write Num Broadcast Retransmits */
+HCI_API extern BOOLEAN btsnd_hcic_read_hold_mode_act(void);                     /* Read Hold Mode Activity */
+HCI_API extern BOOLEAN btsnd_hcic_write_hold_mode_act(UINT8 flags);             /* Write Hold Mode Activity */
+
+HCI_API extern BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type);     /* Read Tx Power */
+
+#define HCIC_PARAM_SIZE_READ_TX_POWER    3
+
+#define HCI_READ_TX_POWER_HANDLE_OFF    0
+#define HCI_READ_TX_POWER_TYPE_OFF      2
+
+/* Read transmit power level parameter */
+#define HCI_READ_CURRENT                0x00
+#define HCI_READ_MAXIMUM                0x01
+
+HCI_API extern BOOLEAN btsnd_hcic_read_sco_flow_enable(void);                       /* Read Authentication Enable */
+HCI_API extern BOOLEAN btsnd_hcic_write_sco_flow_enable(UINT8 flag);                /* Write Authentication Enable */
+
+                                                                /* Set Host Buffer Size */
+HCI_API extern BOOLEAN btsnd_hcic_set_host_buf_size (UINT16 acl_len,
+                                                     UINT8 sco_len,
+                                                     UINT16 acl_num,
+                                                     UINT16 sco_num);
+
+#define HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE    7
+
+#define HCI_HOST_BUF_SIZE_ACL_LEN_OFF   0
+#define HCI_HOST_BUF_SIZE_SCO_LEN_OFF   2
+#define HCI_HOST_BUF_SIZE_ACL_NUM_OFF   3
+#define HCI_HOST_BUF_SIZE_SCO_NUM_OFF   5
+
+
+HCI_API extern BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles,
+                                                         UINT16 *handle,
+                                                         UINT16 *num_pkts);         /* Set Host Buffer Size */
+
+#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE    sizeof(btmsg_hcic_num_pkts_done_t)
+
+#define MAX_DATA_HANDLES        10
+
+#define HCI_PKTS_DONE_NUM_HANDLES_OFF   0
+#define HCI_PKTS_DONE_HANDLE_OFF        1
+#define HCI_PKTS_DONE_NUM_PKTS_OFF      3
+
+HCI_API extern BOOLEAN btsnd_hcic_read_link_super_tout(UINT8 local_controller_id, UINT16 handle);  /* Read Link Supervision Timeout */
+
+                                                                /* Write Link Supervision Timeout */
+HCI_API extern BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout);
+
+#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT        4
+
+#define HCI_LINK_SUPER_TOUT_HANDLE_OFF  0
+#define HCI_LINK_SUPER_TOUT_TOUT_OFF    2
+                                                                /* Write Link Supervision Timeout */
+
+HCI_API extern BOOLEAN btsnd_hcic_read_max_iac (void);                      /* Read Num Supported IAC */
+HCI_API extern BOOLEAN btsnd_hcic_read_cur_iac_lap (void);                  /* Read Current IAC LAP */
+
+HCI_API extern BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac,
+                                                     LAP * const iac_lap);  /* Write Current IAC LAP */
+
+#define MAX_IAC_LAPS    0x40
+
+#define HCI_WRITE_IAC_LAP_NUM_OFF       0
+#define HCI_WRITE_IAC_LAP_LAP_OFF       1
+                                                                /* Write Current IAC LAP */
+
+                                                                /* Read Clock */
+HCI_API extern BOOLEAN btsnd_hcic_read_clock (UINT16 handle, UINT8 which_clock);
+
+#define HCIC_PARAM_SIZE_READ_CLOCK      3
+
+#define HCI_READ_CLOCK_HANDLE_OFF       0
+#define HCI_READ_CLOCK_WHICH_CLOCK      2
+                                                                /* Read Clock */
+
+#ifdef TESTER_ENABLE
+
+#define HCIC_PARAM_SIZE_ENTER_TEST_MODE  2
+
+#define HCI_ENTER_TEST_HANDLE_OFF        0
+
+#define HCIC_PARAM_SIZE_TEST_CNTRL          10
+#define HCI_TEST_CNTRL_HANDLE_OFF           0
+#define HCI_TEST_CNTRL_SCENARIO_OFF         2
+#define HCI_TEST_CNTRL_HOPPINGMODE_OFF      3
+#define HCI_TEST_CNTRL_TX_FREQ_OFF          4
+#define HCI_TEST_CNTRL_RX_FREQ_OFF          5
+#define HCI_TEST_CNTRL_PWR_CNTRL_MODE_OFF   6
+#define HCI_TEST_CNTRL_POLL_PERIOD_OFF      7
+#define HCI_TEST_CNTRL_PKT_TYPE_OFF         8
+#define HCI_TEST_CNTRL_LENGTH_OFF           9
+
+#endif
+
+HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_per (void);                   /* Read Page Scan Period Mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_per (UINT8 mode);            /* Write Page Scan Period Mode */
+HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_mode (void);                  /* Read Page Scan Mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_mode (UINT8 mode);           /* Write Page Scan Mode */
+HCI_API extern BOOLEAN btsnd_hcic_read_local_ver (UINT8 local_controller_id);         /* Read Local Version Info */
+HCI_API extern BOOLEAN btsnd_hcic_read_local_supported_cmds (UINT8 local_controller_id); /* Read Local Supported Commands */
+HCI_API extern BOOLEAN btsnd_hcic_read_local_features (void);                  /* Read Local Supported Features */
+HCI_API extern BOOLEAN btsnd_hcic_read_buffer_size (void);                     /* Read Local buffer sizes */
+HCI_API extern BOOLEAN btsnd_hcic_read_country_code (void);                    /* Read Country Code */
+HCI_API extern BOOLEAN btsnd_hcic_read_bd_addr (void);                         /* Read Local BD_ADDR */
+HCI_API extern BOOLEAN btsnd_hcic_read_fail_contact_count (UINT8 local_controller_id, UINT16 handle); /* Read Failed Contact Counter */
+HCI_API extern BOOLEAN btsnd_hcic_reset_fail_contact_count (UINT8 local_controller_id, UINT16 handle);/* Reset Failed Contact Counter */
+HCI_API extern BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle);            /* Get Link Quality */
+HCI_API extern BOOLEAN btsnd_hcic_read_rssi (UINT16 handle);                   /* Read RSSI */
+HCI_API extern BOOLEAN btsnd_hcic_read_loopback_mode (void);                   /* Read Loopback Mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_loopback_mode (UINT8 mode);            /* Write Loopback Mode */
+HCI_API extern BOOLEAN btsnd_hcic_enable_test_mode (void);                     /* Enable Device Under Test Mode */
+HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type);             /* Write Page Scan Type */
+HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_type(void);                    /* Read Page Scan Type */
+HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type);              /* Write Inquiry Scan Type */
+HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_type(void);                     /* Read Inquiry Scan Type */
+HCI_API extern BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type);              /* Write Inquiry Mode */
+HCI_API extern BOOLEAN btsnd_hcic_read_inquiry_mode(void);                     /* Read Inquiry Mode */
+HCI_API extern BOOLEAN btsnd_hcic_set_afh_channels (UINT8 first, UINT8 last);
+HCI_API extern BOOLEAN btsnd_hcic_write_afh_channel_assessment_mode (UINT8 mode);
+HCI_API extern BOOLEAN btsnd_hcic_set_afh_host_channel_class (UINT8 *p_afhchannelmap);
+HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_assessment_mode(void);
+HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_map (UINT16 handle);
+HCI_API extern BOOLEAN btsnd_hcic_nop(void);                               /* NOP */
+
+                                                              /* Send HCI Data */
+HCI_API extern void btsnd_hcic_data (BT_HDR *p_buf, UINT16 len, UINT16 handle, UINT8 boundary, UINT8 broadcast);
+
+#define HCI_DATA_HANDLE_MASK 0x0FFF
+
+#define HCID_GET_HANDLE_EVENT(p)  (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \
+                                           (*((UINT8 *)((p) + 1) + p->offset + 1) << 8)))
+
+#define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK)
+
+#define HCI_DATA_EVENT_MASK   3
+#define HCI_DATA_EVENT_OFFSET 12
+#define HCID_GET_EVENT(u16)   (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK)
+
+#define HCI_DATA_BCAST_MASK   3
+#define HCI_DATA_BCAST_OFFSET 10
+#define HCID_GET_BCAST(u16)   (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK)
+
+#define HCID_GET_ACL_LEN(p)     (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \
+                                         (*((UINT8 *)((p) + 1) + p->offset + 3) << 8)))
+
+#define HCID_HEADER_SIZE      4
+                                                                /*  Send HCI Data */
+
+#define HCID_GET_SCO_LEN(p)  (*((UINT8 *)((p) + 1) + p->offset + 2))
+
+HCI_API extern void btsnd_hcic_vendor_spec_cmd (
+                                                void *buffer, UINT16 opcode,
+                                                UINT8 len, UINT8 *p_data,
+                                                void *p_cmd_cplt_cback);
+
+
+/*********************************************************************************
+**                                                                              **
+**                          H C I    E V E N T S                                **
+**                                                                              **
+*********************************************************************************/
+
+/* Inquiry Complete Event */
+HCI_API extern void btsnd_hcie_inq_comp(void *buffer, UINT8 status);
+
+#define HCIE_PARAM_SIZE_INQ_COMP  1
+
+/* Inquiry Response Event */
+HCI_API extern void btsnd_hcie_inq_res(void *buffer, UINT8 num_resp, UINT8 **bd_addr,
+                                      UINT8 *page_scan_rep_mode, UINT8 *page_scan_per_mode,
+                                      UINT8 *page_scan_mode, UINT8 **dev_class,
+                                      UINT16 *clock_offset);
+
+/* Connection Complete Event */
+HCI_API extern void btsnd_hcie_connection_comp(void *buffer, UINT8 status, UINT16 handle,
+                                    BD_ADDR bd_addr, UINT8 link_type, UINT8 encr_mode);
+
+#define HCIE_PARAM_SIZE_CONNECTION_COMP    11
+
+
+#define HCI_LINK_TYPE_SCO               0x00
+#define HCI_LINK_TYPE_ACL               0x01
+
+#define HCI_ENCRYPT_MODE_DISABLED       0x00
+#define HCI_ENCRYPT_MODE_POINT_TO_POINT 0x01
+#define HCI_ENCRYPT_MODE_ALL            0x02
+
+
+/* Connection Request Event */
+HCI_API extern void btsnd_hcie_connection_req(void *buffer, BD_ADDR bd_addr, DEV_CLASS dev_class, UINT8 link_type);
+
+#define HCIE_PARAM_SIZE_CONNECTION_REQ  10
+
+#define HCI_LINK_TYPE_SCO               0x00
+#define HCI_LINK_TYPE_ACL               0x01
+
+
+/* Disonnection Complete Event */
+HCI_API extern void btsnd_hcie_disc_comp(void *buffer, UINT8 status, UINT16 handle, UINT8 reason);
+
+#define HCIE_PARAM_SIZE_DISC_COMP  4
+
+
+/* Authentication Complete Event */
+HCI_API extern void btsnd_hcie_auth_comp (void *buffer, UINT8 status, UINT16 handle);
+
+#define HCIE_PARAM_SIZE_AUTH_COMP  3
+
+
+/* Remote Name Request Complete Event */
+HCI_API extern void btsnd_hcie_rmt_name_req_comp(void *buffer, UINT8 status, BD_ADDR bd_addr, BD_NAME name);
+
+#define HCIE_PARAM_SIZE_RMT_NAME_REQ_COMP  (1 + BD_ADDR_LEN + BD_NAME_LEN)
+
+
+/* Encryption Change Event */
+HCI_API extern void btsnd_hcie_encryption_change (void *buffer, UINT8 status, UINT16 handle, BOOLEAN enable);
+
+#define HCIE_PARAM_SIZE_ENCR_CHANGE  4
+
+
+/* Connection Link Key Change Event */
+HCI_API extern void btsnd_hcie_conn_link_key_change (void *buffer, UINT8 status, UINT16 handle);
+
+#define HCIE_PARAM_SIZE_LINK_KEY_CHANGE  3
+
+
+/* Encryption Key Refresh Complete Event */
+HCI_API extern void btsnd_hcie_encrypt_key_refresh (void *buffer, UINT8 status, UINT16 handle);
+
+#define HCIE_PARAM_SIZE_ENCRYPT_KEY_REFRESH  3
+
+
+/* Master Link Key Complete Event */
+HCI_API extern void btsnd_hcie_master_link_key (void *buffer, UINT8 status, UINT16 handle, UINT8 flag);
+
+#define HCIE_PARAM_SIZE_MASTER_LINK_KEY  4
+
+
+/* Read Remote Supported Features Complete Event */
+HCI_API extern void btsnd_hcie_read_rmt_features (void *buffer, UINT8 status, UINT16 handle, UINT8 *features);
+
+#define LMP_FEATURES_SIZE   8
+#define HCIE_PARAM_SIZE_READ_RMT_FEATURES  11
+
+
+/* Read Remote Extended Features Complete Event */
+HCI_API extern void btsnd_hcie_read_rmt_ext_features (void *buffer, UINT8 status, UINT16 handle, UINT8 page_num,
+													  UINT8 max_page_num, UINT8 *features);
+
+#define EXT_LMP_FEATURES_SIZE   8
+#define HCIE_PARAM_SIZE_READ_RMT_EXT_FEATURES  13
+
+
+/* Read Remote Version Complete Event */
+HCI_API extern void btsnd_hcie_read_rmt_version (void *buffer, UINT8 status, UINT16 handle, UINT8 version,
+                                  UINT16 comp_name, UINT16 sub_version);
+
+#define HCIE_PARAM_SIZE_READ_RMT_VERSION  8
+
+
+/* QOS setup complete */
+HCI_API extern void btsnd_hcie_qos_setup_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags,
+                                 UINT8 service_type, UINT32 token_rate, UINT32 peak,
+                                 UINT32 latency, UINT32 delay_var);
+
+#define HCIE_PARAM_SIZE_QOS_SETUP_COMP 21
+
+
+/* Flow Specification complete */
+HCI_API extern void btsnd_hcie_flow_spec_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags,
+                                 UINT8 flow_direction, UINT8 service_type, UINT32 token_rate, UINT32 token_bucket_size,
+                                 UINT32 peak, UINT32 latency);
+
+#define HCIE_PARAM_SIZE_FLOW_SPEC_COMP 22
+
+
+/*  Command Complete Event */
+HCI_API extern void btsnd_hcie_cmd_comp(void *buffer, UINT8 max_host_cmds, UINT16 opcode, UINT8 status);
+
+#define HCIE_PARAM_SIZE_CMD_COMP  4
+
+
+/*  Command Complete with pre-filled in parameters */
+HCI_API extern void btsnd_hcie_cmd_comp_params (void *buffer, UINT8 max_host_cmds, UINT16 cmd_opcode, UINT8 status);
+
+#define HCI_CMD_COMPL_PARAM_OFFSET 4
+
+
+/*  Command Complete Event with 1-byte param */
+HCI_API extern void btsnd_hcie_cmd_comp_param1(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
+                                UINT8 status, UINT8 param1);
+
+#define HCIE_PARAM_SIZE_CMD_COMP_PARAM1  5
+
+/*  Command Complete Event with 2-byte param */
+HCI_API extern void btsnd_hcie_cmd_comp_param2(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
+                                UINT8 status, UINT16 param2);
+
+#define HCIE_PARAM_SIZE_CMD_COMP_PARAM2  6
+
+
+/*  Command Complete Event with BD-addr as param */
+HCI_API extern void btsnd_hcie_cmd_comp_bd_addr(void *buffer, UINT8 max_host_cmds, UINT16 opcode,
+                                 UINT8 status, BD_ADDR bd_addr);
+
+#define HCIE_PARAM_SIZE_CMD_COMP_BD_ADDR  10
+
+
+/*  Command Pending Event */
+HCI_API extern void btsnd_hcie_cmd_status (void *buffer, UINT8 status, UINT8 max_host_cmds, UINT16 opcode);
+
+#define HCIE_PARAM_SIZE_CMD_STATUS  4
+
+
+/*  HW failure Event */
+HCI_API extern void btsnd_hcie_hw_failure (void *buffer, UINT8 code);
+
+#define HCIE_PARAM_SIZE_HW_FAILURE 1
+
+
+/*  Flush Occured Event */
+HCI_API extern void btsnd_hcie_flush_occured (void *buffer, UINT16 handle);
+
+#define HCIE_PARAM_SIZE_FLUSH_OCCURED  2
+
+
+/*  Role Changed Event */
+HCI_API extern void btsnd_hcie_role_change (void *buffer, UINT8 status, BD_ADDR bd_addr, UINT8 role);
+
+#define HCIE_PARAM_SIZE_ROLE_CHANGE  8
+
+
+/* Ready for Data Packets Event */
+HCI_API extern void btsnd_hcie_num_compl_pkts (void *buffer, UINT8 num_handles, UINT16 *p_handle, UINT16 *num_pkts);
+
+#define MAX_DATA_HANDLES        10
+
+
+/* Mode Change Event */
+HCI_API extern void btsnd_hcie_mode_change (void *buffer, UINT8 status, UINT16 handle,
+                             UINT8 mode, UINT16 interval);
+
+#define HCIE_PARAM_SIZE_MODE_CHANGE  6
+#define MAX_DATA_HANDLES        10
+
+
+
+/* Return Link Keys Event */
+HCI_API extern void btsnd_hcie_return_link_keys (void *buffer, UINT8 num_keys, BD_ADDR *bd_addr, LINK_KEY *link_key);
+
+/* This should not be more than 0x0b */
+#define MAX_LINK_KEYS 10
+
+
+
+/* PIN Code Request Event */
+HCI_API extern void btsnd_hcie_pin_code_req (void *buffer, BD_ADDR bd_addr);
+
+#define HCIE_PARAM_SIZE_PIN_CODE_REQ  6
+
+
+
+/* Link Key Request Event */
+HCI_API extern void btsnd_hcie_link_key_req (void *buffer, BD_ADDR bd_addr);
+
+#define HCIE_PARAM_SIZE_LINK_KEY_REQ  6
+
+
+
+/* Link Key Notification Event */
+HCI_API extern void btsnd_hcie_link_key_notify (void *buffer, BD_ADDR bd_addr, LINK_KEY link_key, UINT8 key_type);
+
+#define HCIE_PARAM_SIZE_LINK_KEY_NOTIFY  23
+
+
+
+/* Loopback Command Event */
+HCI_API extern void btsnd_hcie_loopback_command (void *buffer, UINT8 data_len, UINT8 *data);
+
+#define HCIE_PARAM_SIZE_LOOPBACK_COMMAND  sizeof(btmsg_hcie_loopback_cmd_t)
+
+
+
+/* Data Buffer Overflow Event */
+HCI_API extern void btsnd_hcie_data_buf_overflow (void *buffer, UINT8 link_type);
+
+#define HCIE_PARAM_SIZE_DATA_BUF_OVERFLOW  1
+
+
+
+/* Max Slots Change Event */
+HCI_API extern void btsnd_hcie_max_slots_change(void *buffer, UINT16 handle, UINT8 max_slots);
+
+#define HCIE_PARAM_SIZE_MAX_SLOTS_CHANGE  3
+
+
+/* Read Clock Offset Complet Event */
+HCI_API extern void btsnd_hcie_read_clock_off_comp(void *buffer, UINT8 status, UINT16 handle,
+                                    UINT16 clock_offset);
+
+#define HCIE_PARAM_SIZE_READ_CLOCK_OFF_COMP  5
+
+
+
+/* Connection Packet Type Change Event */
+HCI_API extern void btsnd_hcie_pkt_type_change (void *buffer, UINT8 status, UINT16 handle, UINT16 pkt_type);
+
+#define HCIE_PARAM_SIZE_PKT_TYPE_CHANGE  5
+
+
+
+/* QOS violation Event */
+HCI_API extern void btsnd_hcie_qos_violation (void *buffer, UINT16 handle);
+
+#define HCIE_PARAM_SIZE_QOS_VIOLATION  2
+
+
+
+/* Page Scan Mode Change Event */
+HCI_API extern void btsnd_hcie_pagescan_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode);
+
+#define HCIE_PARAM_SIZE_PAGE_SCAN_MODE_CHNG  7
+
+
+/* Page Scan Repetition Mode Change Event */
+HCI_API extern void btsnd_hcie_pagescan_rep_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode);
+
+#define HCIE_PARAM_SIZE_PAGE_SCAN_REP_MODE_CHNG  7
+
+
+/* Sniff Sub Rate Event */
+HCI_API extern void btsnd_hcie_sniff_sub_rate(void *buffer, UINT8 status, UINT16 handle, UINT16 max_tx_lat, UINT16 max_rx_lat,
+                                        UINT16 min_remote_timeout, UINT16 min_local_timeout);
+
+#define HCIE_PARAM_SIZE_SNIFF_SUB_RATE  11
+
+
+
+/* Extended Inquiry Result Event */
+HCI_API extern void btsnd_hcie_ext_inquiry_result(void *buffer, UINT8 num_resp, UINT8 **bd_addr,
+                                      UINT8 *page_scan_rep_mode, UINT8 *reserved,
+                                      UINT8 **dev_class, UINT16 *clock_offset, UINT8 *rssi, UINT8 *p_data);
+
+
+#if (BLE_INCLUDED == TRUE)
+/********************************************************************************
+** BLE Commands
+**      Note: "local_controller_id" is for transport, not counted in HCI message size
+*********************************************************************************/
+#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD       8
+#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD    6
+#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS    15
+#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP      31
+#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE        1
+#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM    7
+#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE   2
+#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN      25
+#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL  0
+#define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST        0
+#define HCIC_PARAM_SIZE_ADD_WHITE_LIST          7
+#define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST       7
+#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS  14
+#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS     5
+#define HCIC_PARAM_SIZE_READ_CHNL_MAP         2
+#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT    2
+#define HCIC_PARAM_SIZE_BLE_ENCRYPT             32
+#define HCIC_PARAM_SIZE_BLE_RAND                0
+
+#define HCIC_BLE_RAND_DI_SIZE                   8
+#define HCIC_BLE_ENCRYT_KEY_SIZE                16
+#define HCIC_PARAM_SIZE_BLE_START_ENC           (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE)
+#define HCIC_PARAM_SIZE_LTK_REQ_REPLY           (2 + HCIC_BLE_ENCRYT_KEY_SIZE)
+#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY           2
+#define HCIC_BLE_CHNL_MAP_SIZE                  5
+#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA      31
+
+/* ULP HCI command */
+HCI_API extern BOOLEAN btsnd_hcic_ble_reset(void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_buffer_size (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max,
+                                       UINT8 adv_type, UINT8 addr_type_own,
+                                       UINT8 addr_type_dir, BD_ADDR direct_bda,
+                                       UINT8 channel_map, UINT8 adv_filter_policy);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type,
+                                          UINT16 scan_int, UINT16 scan_win,
+                                          UINT8 addr_type, UINT8 scan_filter_policy);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win,
+                                       UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own,
+                                       UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout,
+                                       UINT16 min_ce_len, UINT16 max_ce_len);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_create_conn_cancel (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_white_list_size (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_clear_white_list (void);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max,
+                                           UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_encrypt (UINT8* key, UINT8 key_len, UINT8* plain_text, UINT8 pt_len, void *p_cmd_cplt_cback);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle,
+                                                 UINT8 rand[HCIC_BLE_RAND_DI_SIZE],
+                                                UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle);
+
+HCI_API extern BOOLEAN btsnd_hcic_ble_read_supported_states (void);
+
+
+#endif /* BLE_INCLUDED */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/stack/include/hiddefs.h b/stack/include/hiddefs.h
new file mode 100644
index 0000000..e29a4c4
--- /dev/null
+++ b/stack/include/hiddefs.h
@@ -0,0 +1,158 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains HID protocol definitions
+ *
+ ******************************************************************************/
+
+#ifndef HIDDEFS_H
+#define HIDDEFS_H
+
+#include "sdp_api.h"
+/*
+** tHID_STATUS: HID result codes, returned by HID and device and host functions.
+*/
+enum
+{
+   HID_SUCCESS,
+   HID_ERR_NOT_REGISTERED,
+   HID_ERR_ALREADY_REGISTERED,
+   HID_ERR_NO_RESOURCES,
+   HID_ERR_NO_CONNECTION,
+   HID_ERR_INVALID_PARAM,
+   HID_ERR_UNSUPPORTED,
+   HID_ERR_UNKNOWN_COMMAND,
+   HID_ERR_CONGESTED,
+   HID_ERR_CONN_IN_PROCESS,
+   HID_ERR_ALREADY_CONN,
+   HID_ERR_DISCONNECTING,
+   HID_ERR_SET_CONNABLE_FAIL,
+   /* Device specific error codes */
+   HID_ERR_HOST_UNKNOWN,
+   HID_ERR_L2CAP_FAILED,
+   HID_ERR_AUTH_FAILED,
+   HID_ERR_SDP_BUSY,
+
+   HID_ERR_INVALID = 0xFF
+};
+
+typedef UINT8 tHID_STATUS;
+
+#define    HID_L2CAP_CONN_FAIL (0x0100) /* Connection Attempt was made but failed */
+#define    HID_L2CAP_REQ_FAIL  (0x0200)  /* L2CAP_ConnectReq API failed */
+#define    HID_L2CAP_CFG_FAIL  (0x0400) /* L2CAP Configuration was rejected by peer */
+
+
+
+/* Define the HID transaction types
+*/
+#define HID_TRANS_HANDSHAKE     (0)
+#define HID_TRANS_CONTROL       (1)
+#define HID_TRANS_GET_REPORT    (4)
+#define HID_TRANS_SET_REPORT    (5)
+#define HID_TRANS_GET_PROTOCOL  (6)
+#define HID_TRANS_SET_PROTOCOL  (7)
+#define HID_TRANS_GET_IDLE      (8)
+#define HID_TRANS_SET_IDLE      (9)
+#define HID_TRANS_DATA          (10)
+#define HID_TRANS_DATAC         (11)
+
+#define HID_GET_TRANS_FROM_HDR(x) ((x >> 4) & 0x0f)
+#define HID_GET_PARAM_FROM_HDR(x) (x & 0x0f)
+#define HID_BUILD_HDR(t,p)  (UINT8)((t << 4) | (p & 0x0f))
+
+
+/* Parameters for Handshake
+*/
+#define HID_PAR_HANDSHAKE_RSP_SUCCESS               (0)
+#define HID_PAR_HANDSHAKE_RSP_NOT_READY             (1)
+#define HID_PAR_HANDSHAKE_RSP_ERR_INVALID_REP_ID    (2)
+#define HID_PAR_HANDSHAKE_RSP_ERR_UNSUPPORTED_REQ   (3)
+#define HID_PAR_HANDSHAKE_RSP_ERR_INVALID_PARAM     (4)
+#define HID_PAR_HANDSHAKE_RSP_ERR_UNKNOWN           (14)
+#define HID_PAR_HANDSHAKE_RSP_ERR_FATAL             (15)
+
+
+/* Parameters for Control
+*/
+#define HID_PAR_CONTROL_NOP                         (0)
+#define HID_PAR_CONTROL_HARD_RESET                  (1)
+#define HID_PAR_CONTROL_SOFT_RESET                  (2)
+#define HID_PAR_CONTROL_SUSPEND                     (3)
+#define HID_PAR_CONTROL_EXIT_SUSPEND                (4)
+#define HID_PAR_CONTROL_VIRTUAL_CABLE_UNPLUG        (5)
+
+
+/* Different report types in get, set, data
+*/
+#define HID_PAR_REP_TYPE_MASK                       (0x03)
+#define HID_PAR_REP_TYPE_OTHER                      (0x00)
+#define HID_PAR_REP_TYPE_INPUT                      (0x01)
+#define HID_PAR_REP_TYPE_OUTPUT                     (0x02)
+#define HID_PAR_REP_TYPE_FEATURE                    (0x03)
+
+/* Parameters for Get Report
+*/
+
+/* Buffer size in two bytes after Report ID */
+#define HID_PAR_GET_REP_BUFSIZE_FOLLOWS             (0x08)
+
+
+/* Parameters for Protocol Type
+*/
+#define HID_PAR_PROTOCOL_MASK                       (0x01)
+#define HID_PAR_PROTOCOL_REPORT                     (0x01)
+#define HID_PAR_PROTOCOL_BOOT_MODE                  (0x00)
+
+#define HID_PAR_REP_TYPE_MASK                       (0x03)
+
+/* Descriptor types in the SDP record
+*/
+#define HID_SDP_DESCRIPTOR_REPORT                   (0x22)
+#define HID_SDP_DESCRIPTOR_PHYSICAL                 (0x23)
+
+typedef struct desc_info
+{
+    UINT16 dl_len;
+    UINT8 *dsc_list;
+} tHID_DEV_DSCP_INFO;
+
+#define HID_SSR_PARAM_INVALID    0xffff
+
+typedef struct sdp_info
+{
+    char svc_name[HID_MAX_SVC_NAME_LEN];   /*Service Name */
+    char svc_descr[HID_MAX_SVC_DESCR_LEN]; /*Service Description*/
+    char prov_name[HID_MAX_PROV_NAME_LEN]; /*Provider Name.*/
+    UINT16    rel_num;    /*Release Number */
+    UINT16    hpars_ver;  /*HID Parser Version.*/
+    UINT16    ssr_max_latency; /* HIDSSRHostMaxLatency value, if HID_SSR_PARAM_INVALID not used*/
+    UINT16    ssr_min_tout; /* HIDSSRHostMinTimeout value, if HID_SSR_PARAM_INVALID not used* */
+    UINT8     sub_class;    /*Device Subclass.*/
+    UINT8     ctry_code;     /*Country Code.*/
+    UINT16    sup_timeout;/* Supervisory Timeout */
+
+    tHID_DEV_DSCP_INFO  dscp_info;   /* Descriptor list and Report list to be set in the SDP record.
+                                       This parameter is used if HID_DEV_USE_GLB_SDP_REC is set to FALSE.*/
+    tSDP_DISC_REC       *p_sdp_layer_rec;
+} tHID_DEV_SDP_INFO;
+
+#endif
+
diff --git a/stack/include/hidh_api.h b/stack/include/hidh_api.h
new file mode 100644
index 0000000..4662630
--- /dev/null
+++ b/stack/include/hidh_api.h
@@ -0,0 +1,222 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2002-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef HIDH_API_H
+#define HIDH_API_H
+
+#include "hiddefs.h"
+#include "sdp_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+enum {
+    HID_SDP_NO_SERV_UUID = (SDP_ILLEGAL_PARAMETER+1),
+    HID_SDP_MANDATORY_MISSING
+};
+
+/* Attributes mask values to be used in HID_HostAddDev API */
+#define HID_VIRTUAL_CABLE        0x0001
+#define HID_NORMALLY_CONNECTABLE 0x0002
+#define HID_RECONN_INIT          0x0004
+#define HID_SDP_DISABLE          0x0008
+#define HID_BATTERY_POWER        0x0010
+#define HID_REMOTE_WAKE          0x0020
+#define HID_SUP_TOUT_AVLBL       0x0040
+#define HID_SSR_MAX_LATENCY      0x0080
+#define HID_SSR_MIN_TOUT         0x0100
+
+#define HID_SEC_REQUIRED         0x8000
+
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+typedef void (tHID_HOST_SDP_CALLBACK) (UINT16 result, UINT16 attr_mask,
+                                       tHID_DEV_SDP_INFO *sdp_rec );
+
+/* HID-HOST returns the events in the following table to the application via tHID_HOST_DEV_CALLBACK
+HID_HDEV_EVT_OPEN   Connected to device with Interrupt and Control Channels in OPEN state.
+                                                        Data = NA
+HID_HDEV_EVT_CLOSE  Connection with device is closed.   Data=reason code.
+HID_HDEV_EVT_RETRYING   Lost connection is being re-connected.
+                                                        Data=Retrial number
+HID_HDEV_EVT_IN_REPORT  Device sent an input report     Data=Report Type pdata= pointer to BT_HDR
+                                                        (GKI buffer having report data.)
+HID_HDEV_EVT_HANDSHAKE  Device sent SET_REPORT          Data=Result-code pdata=NA.
+HID_HDEV_EVT_VC_UNPLUG  Device sent Virtual Unplug      Data=NA. pdata=NA.
+*/
+
+enum
+{
+    HID_HDEV_EVT_OPEN,
+    HID_HDEV_EVT_CLOSE,
+    HID_HDEV_EVT_RETRYING,
+    HID_HDEV_EVT_INTR_DATA,
+    HID_HDEV_EVT_INTR_DATC,
+    HID_HDEV_EVT_CTRL_DATA,
+    HID_HDEV_EVT_CTRL_DATC,
+    HID_HDEV_EVT_HANDSHAKE,
+    HID_HDEV_EVT_VC_UNPLUG
+};
+typedef void (tHID_HOST_DEV_CALLBACK) (UINT8 dev_handle,
+                                       UINT8 event, /* Event from HID-DEVICE. */
+                                       UINT32 data, /* Integer data corresponding to the event.*/
+                                       BT_HDR *p_buf ); /* Pointer data corresponding to the event. */
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         HID_HostGetSDPRecord
+**
+** Description      This function reads the device SDP record.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostGetSDPRecord (BD_ADDR addr,
+                                                 tSDP_DISCOVERY_DB *p_db,
+                                                 UINT32 db_len,
+                                                 tHID_HOST_SDP_CALLBACK *sdp_cback );
+
+/*******************************************************************************
+**
+** Function         HID_HostRegister
+**
+** Description      This function registers HID-Host with lower layers.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostRegister (tHID_HOST_DEV_CALLBACK *dev_cback);
+
+/*******************************************************************************
+**
+** Function         HID_HostDeregister
+**
+** Description      This function is called when the host is about power down.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostDeregister(void);
+
+/*******************************************************************************
+**
+** Function         HID_HostAddDev
+**
+** Description      This is called so HID-host may manage this device.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostAddDev (BD_ADDR addr, UINT16 attr_mask,
+                                           UINT8 *handle );
+
+/*******************************************************************************
+**
+** Function         HID_HostRemoveDev
+**
+** Description      This removes the device from list devices that host has to manage.
+**
+** Returns          tHID_STATUS
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostRemoveDev (UINT8 dev_handle );
+
+/*******************************************************************************
+**
+** Function         HID_HostOpenDev
+**
+** Description      This function is called when the user wants to initiate a
+**                  connection attempt to a device.
+**
+** Returns          void
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostOpenDev (UINT8 dev_handle );
+
+/*******************************************************************************
+**
+** Function         HID_HostWriteDev
+**
+** Description      This function is called when the host has a report to send.
+**
+** Returns          void
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostWriteDev(UINT8 dev_handle, UINT8 t_type,
+                                            UINT8 param, UINT16 data,
+                                            UINT8 report_id, BT_HDR *pbuf);
+
+/*******************************************************************************
+**
+** Function         HID_HostCloseDev
+**
+** Description      This function disconnects the device.
+**
+** Returns          void
+**
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostCloseDev(UINT8 dev_handle );
+
+/*******************************************************************************
+** Function         HID_HostInit
+**
+** Description      This function initializes the control block and trace variable
+**
+** Returns          void
+*******************************************************************************/
+HID_API extern void HID_HostInit(void);
+
+/*******************************************************************************
+** Function        HID_HostSetSecurityLevel
+**
+** Description     This function sets the security level for the devices which
+**                 are marked by application as requiring security
+**
+** Returns         tHID_STATUS
+*******************************************************************************/
+HID_API extern tHID_STATUS HID_HostSetSecurityLevel( char serv_name[], UINT8 sec_lvl );
+
+/*******************************************************************************
+**
+** Function         HID_HostSetTraceLevel
+**
+** Description      This function sets the trace level for HID Host. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+HID_API extern UINT8 HID_HostSetTraceLevel (UINT8 new_level);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* HIDH_API_H */
diff --git a/stack/include/l2c_api.h b/stack/include/l2c_api.h
new file mode 100644
index 0000000..618ea8d
--- /dev/null
+++ b/stack/include/l2c_api.h
@@ -0,0 +1,1185 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the L2CAP API definitions
+ *
+ ******************************************************************************/
+#ifndef L2C_API_H
+#define L2C_API_H
+
+#include "bt_target.h"
+#include "l2cdefs.h"
+#include "hcidefs.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* Define the minimum offset that L2CAP needs in a buffer. This is made up of
+** HCI type(1), len(2), handle(2), L2CAP len(2) and CID(2) => 9
+*/
+#define L2CAP_MIN_OFFSET    13     /* plus control(2), SDU length(2) */
+
+/* Minimum offset for broadcast needs another two bytes for the PSM */
+#define L2CAP_BCST_MIN_OFFSET       11
+
+/* ping result codes */
+#define L2CAP_PING_RESULT_OK        0       /* Ping reply received OK     */
+#define L2CAP_PING_RESULT_NO_LINK   1       /* Link could not be setup    */
+#define L2CAP_PING_RESULT_NO_RESP   2       /* Remote L2CAP did not reply */
+
+/* result code for L2CA_DataWrite() */
+#define L2CAP_DW_FAILED        FALSE
+#define L2CAP_DW_SUCCESS       TRUE
+#define L2CAP_DW_CONGESTED     2
+
+/* Values for priority parameter to L2CA_SetAclPriority */
+#define L2CAP_PRIORITY_NORMAL       0
+#define L2CAP_PRIORITY_HIGH         1
+
+/* Values for priority parameter to L2CA_SetTxPriority */
+#define L2CAP_CHNL_PRIORITY_HIGH    0
+#define L2CAP_CHNL_PRIORITY_MEDIUM  1
+#define L2CAP_CHNL_PRIORITY_LOW     2
+
+typedef UINT8 tL2CAP_CHNL_PRIORITY;
+
+/* Values for Tx/Rx data rate parameter to L2CA_SetChnlDataRate */
+#define L2CAP_CHNL_DATA_RATE_HIGH       3
+#define L2CAP_CHNL_DATA_RATE_MEDIUM     2
+#define L2CAP_CHNL_DATA_RATE_LOW        1
+#define L2CAP_CHNL_DATA_RATE_NO_TRAFFIC 0
+
+typedef UINT8 tL2CAP_CHNL_DATA_RATE;
+
+/* Data Packet Flags  (bits 2-15 are reserved) */
+/* layer specific 14-15 bits are used for FCR SAR */
+#define L2CAP_FLUSHABLE_MASK        0x0003
+#define L2CAP_FLUSHABLE_CH_BASED    0x0000
+#define L2CAP_FLUSHABLE_PKT         0x0001
+#define L2CAP_NON_FLUSHABLE_PKT     0x0002
+
+
+/* L2CA_FlushChannel num_to_flush definitions */
+#define L2CAP_FLUSH_CHANS_ALL       0xffff
+#define L2CAP_FLUSH_CHANS_GET       0x0000
+
+
+/* special CID for Multi-AV for reporting congestion */
+#define L2CAP_MULTI_AV_CID          0
+
+/* length of the HCI header block */
+/* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) */
+#define L2CAP_MULTI_AV_HCI_HDR_LEN	8
+
+/* length of padding for 4 bytes align */
+#define L2CAP_MULTI_AV_PADDING_LEN  2
+
+/* length of the HCI header block with padding for FCR */
+/* HCI header(4) + SNK count(1) + FCR bits(1) + AV data length(2) + padding(2) */
+#define L2CAP_MULTI_AV_HCI_HDR_LEN_WITH_PADDING	10
+
+/* length of the L2CAP header block */
+/* HCI header(4) + L2CAP header(4) + padding(4) or control word(2) + FCS(2) */
+#define L2CAP_MULTI_AV_L2C_HDR_LEN	12
+
+/* definition used for L2CA_SetDesireRole */
+#define L2CAP_ROLE_SLAVE            HCI_ROLE_SLAVE
+#define L2CAP_ROLE_MASTER           HCI_ROLE_MASTER
+#define L2CAP_ROLE_ALLOW_SWITCH     0x80    /* set this bit to allow switch at create conn */
+#define L2CAP_ROLE_DISALLOW_SWITCH  0x40    /* set this bit to disallow switch at create conn */
+#define L2CAP_ROLE_CHECK_SWITCH     0xC0
+
+
+/* Values for 'allowed_modes' field passed in structure tL2CAP_ERTM_INFO
+*/
+#define L2CAP_FCR_CHAN_OPT_BASIC    (1 << L2CAP_FCR_BASIC_MODE)
+#define L2CAP_FCR_CHAN_OPT_ERTM     (1 << L2CAP_FCR_ERTM_MODE)
+#define L2CAP_FCR_CHAN_OPT_STREAM   (1 << L2CAP_FCR_STREAM_MODE)
+
+#define L2CAP_FCR_CHAN_OPT_ALL_MASK (L2CAP_FCR_CHAN_OPT_BASIC | L2CAP_FCR_CHAN_OPT_ERTM | L2CAP_FCR_CHAN_OPT_STREAM)
+
+/* Validity check for PSM.  PSM values must be odd.  Also, all PSM values must
+** be assigned such that the least significant bit of the most sigificant
+** octet equals zero.
+*/
+#define L2C_INVALID_PSM(psm)    (((psm) & 0x0101) != 0x0001)
+#define L2C_IS_VALID_PSM(psm)   (((psm) & 0x0101) == 0x0001)
+
+#if (BLE_INCLUDED == TRUE)
+#define L2CAP_LE_INT_MIN            0x0006
+#define L2CAP_LE_INT_MAX            0x0C80
+#define L2CAP_LE_LATENCY_MAX        500
+#define L2CAP_LE_TIMEOUT_MIN        0x000a
+#define L2CAP_LE_TIMEOUT_MAX        0x0C80
+#define L2CAP_LE_TIMEOUT_DEFAULT    0x07D0
+#endif
+
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+typedef struct
+{
+#define L2CAP_FCR_BASIC_MODE    0x00
+#define L2CAP_FCR_ERTM_MODE     0x03
+#define L2CAP_FCR_STREAM_MODE   0x04
+
+    UINT8  mode;
+
+    UINT8  tx_win_sz;
+    UINT8  max_transmit;
+    UINT16 rtrans_tout;
+    UINT16 mon_tout;
+    UINT16 mps;
+} tL2CAP_FCR_OPTS;
+
+/* Define a structure to hold the configuration parameters. Since the
+** parameters are optional, for each parameter there is a boolean to
+** use to signify its presence or absence.
+*/
+typedef struct
+{
+    UINT16      result;                 /* Only used in confirm messages */
+    BOOLEAN     mtu_present;
+    UINT16      mtu;
+    BOOLEAN     qos_present;
+    FLOW_SPEC   qos;
+    BOOLEAN     flush_to_present;
+    UINT16      flush_to;
+    BOOLEAN     fcr_present;
+    tL2CAP_FCR_OPTS fcr;
+    BOOLEAN     fcs_present;            /* Optionally bypasses FCS checks */
+    UINT8       fcs;                    /* '0' if desire is to bypass FCS, otherwise '1' */
+    BOOLEAN               ext_flow_spec_present;
+    tHCI_EXT_FLOW_SPEC    ext_flow_spec;
+    UINT16      flags;                  /* bit 0: 0-no continuation, 1-continuation */
+} tL2CAP_CFG_INFO;
+
+/* L2CAP channel configured field bitmap */
+#define L2CAP_CH_CFG_MASK_MTU           0x0001
+#define L2CAP_CH_CFG_MASK_QOS           0x0002
+#define L2CAP_CH_CFG_MASK_FLUSH_TO      0x0004
+#define L2CAP_CH_CFG_MASK_FCR           0x0008
+#define L2CAP_CH_CFG_MASK_FCS           0x0010
+#define L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC 0x0020
+
+typedef UINT16 tL2CAP_CH_CFG_BITS;
+
+/*********************************
+**  Callback Functions Prototypes
+**********************************/
+
+/* Connection indication callback prototype. Parameters are
+**              BD Address of remote
+**              Local CID assigned to the connection
+**              PSM that the remote wants to connect to
+**              Identifier that the remote sent
+*/
+typedef void (tL2CA_CONNECT_IND_CB) (BD_ADDR, UINT16, UINT16, UINT8);
+
+
+/* Connection confirmation callback prototype. Parameters are
+**              Local CID
+**              Result - 0 = connected, non-zero means failure reason
+*/
+typedef void (tL2CA_CONNECT_CFM_CB) (UINT16, UINT16);
+
+
+/* Connection pending callback prototype. Parameters are
+**              Local CID
+*/
+typedef void (tL2CA_CONNECT_PND_CB) (UINT16);
+
+
+/* Configuration indication callback prototype. Parameters are
+**              Local CID assigned to the connection
+**              Pointer to configuration info
+*/
+typedef void (tL2CA_CONFIG_IND_CB) (UINT16, tL2CAP_CFG_INFO *);
+
+
+/* Configuration confirm callback prototype. Parameters are
+**              Local CID assigned to the connection
+**              Pointer to configuration info
+*/
+typedef void (tL2CA_CONFIG_CFM_CB) (UINT16, tL2CAP_CFG_INFO *);
+
+
+/* Disconnect indication callback prototype. Parameters are
+**              Local CID
+**              Boolean whether upper layer should ack this
+*/
+typedef void (tL2CA_DISCONNECT_IND_CB) (UINT16, BOOLEAN);
+
+
+/* Disconnect confirm callback prototype. Parameters are
+**              Local CID
+**              Result
+*/
+typedef void (tL2CA_DISCONNECT_CFM_CB) (UINT16, UINT16);
+
+
+/* QOS Violation indication callback prototype. Parameters are
+**              BD Address of violating device
+*/
+typedef void (tL2CA_QOS_VIOLATION_IND_CB) (BD_ADDR);
+
+
+/* Data received indication callback prototype. Parameters are
+**              Local CID
+**              Address of buffer
+*/
+typedef void (tL2CA_DATA_IND_CB) (UINT16, BT_HDR *);
+
+
+/* Echo response callback prototype. Note that this is not included in the
+** registration information, but is passed to L2CAP as part of the API to
+** actually send an echo request. Parameters are
+**              Result
+*/
+typedef void (tL2CA_ECHO_RSP_CB) (UINT16);
+
+
+/* Callback function prototype to pass broadcom specific echo response  */
+/* to the upper layer                                                   */
+typedef void (tL2CA_ECHO_DATA_CB) (BD_ADDR, UINT16, UINT8 *);
+
+
+/* Congestion status callback protype. This callback is optional. If
+** an application tries to send data when the transmit queue is full,
+** the data will anyways be dropped. The parameter is:
+**              Local CID
+**              TRUE if congested, FALSE if uncongested
+*/
+typedef void (tL2CA_CONGESTION_STATUS_CB) (UINT16, BOOLEAN);
+
+/* Callback prototype for number of packets completed events.
+** This callback notifies the application when Number of Completed Packets
+** event has been received.
+** This callback is originally designed for 3DG devices.
+** The parameter is:
+**          peer BD_ADDR
+*/
+typedef void (tL2CA_NOCP_CB) (BD_ADDR);
+
+/* Transmit complete callback protype. This callback is optional. If
+** set, L2CAP will call it when packets are sent or flushed. If the
+** count is 0xFFFF, it means all packets are sent for that CID (eRTM
+** mode only). The parameters are:
+**              Local CID
+**              Number of SDUs sent or dropped
+*/
+typedef void (tL2CA_TX_COMPLETE_CB) (UINT16, UINT16);
+
+/* Define the structure that applications use to register with
+** L2CAP. This structure includes callback functions. All functions
+** MUST be provided, with the exception of the "connect pending"
+** callback and "congestion status" callback.
+*/
+typedef struct
+{
+    tL2CA_CONNECT_IND_CB        *pL2CA_ConnectInd_Cb;
+    tL2CA_CONNECT_CFM_CB        *pL2CA_ConnectCfm_Cb;
+    tL2CA_CONNECT_PND_CB        *pL2CA_ConnectPnd_Cb;
+    tL2CA_CONFIG_IND_CB         *pL2CA_ConfigInd_Cb;
+    tL2CA_CONFIG_CFM_CB         *pL2CA_ConfigCfm_Cb;
+    tL2CA_DISCONNECT_IND_CB     *pL2CA_DisconnectInd_Cb;
+    tL2CA_DISCONNECT_CFM_CB     *pL2CA_DisconnectCfm_Cb;
+    tL2CA_QOS_VIOLATION_IND_CB  *pL2CA_QoSViolationInd_Cb;
+    tL2CA_DATA_IND_CB           *pL2CA_DataInd_Cb;
+    tL2CA_CONGESTION_STATUS_CB  *pL2CA_CongestionStatus_Cb;
+    tL2CA_TX_COMPLETE_CB        *pL2CA_TxComplete_Cb;
+
+} tL2CAP_APPL_INFO;
+
+/* Define the structure that applications use to create or accept
+** connections with enhanced retransmission mode.
+*/
+typedef struct
+{
+    UINT8       preferred_mode;
+    UINT8       allowed_modes;
+    UINT8       user_rx_pool_id;
+    UINT8       user_tx_pool_id;
+    UINT8       fcr_rx_pool_id;
+    UINT8       fcr_tx_pool_id;
+
+} tL2CAP_ERTM_INFO;
+
+#define L2CA_REGISTER(a,b,c)        L2CA_Register(a,(tL2CAP_APPL_INFO *)b)
+#define L2CA_DEREGISTER(a)          L2CA_Deregister(a)
+#define L2CA_CONNECT_REQ(a,b,c,d)   L2CA_ErtmConnectReq(a,b,c)
+#define L2CA_CONNECT_RSP(a,b,c,d,e,f,g) L2CA_ErtmConnectRsp(a,b,c,d,e,f)
+#define L2CA_CONFIG_REQ(a,b)        L2CA_ConfigReq(a,b)
+#define L2CA_CONFIG_RSP(a,b)        L2CA_ConfigRsp(a,b)
+#define L2CA_DISCONNECT_REQ(a)      L2CA_DisconnectReq(a)
+#define L2CA_DISCONNECT_RSP(a)      L2CA_DisconnectRsp(a)
+#define L2CA_DATA_WRITE(a, b)       L2CA_DataWrite(a, b)
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         L2CA_Register
+**
+** Description      Other layers call this function to register for L2CAP
+**                  services.
+**
+** Returns          PSM to use or zero if error. Typically, the PSM returned
+**                  is the same as was passed in, but for an outgoing-only
+**                  connection to a dynamic PSM, a "virtual" PSM is returned
+**                  and should be used in the calls to L2CA_ConnectReq() and
+**                  BTM_SetSecurityLevel().
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info);
+
+/*******************************************************************************
+**
+** Function         L2CA_Deregister
+**
+** Description      Other layers call this function to deregister for L2CAP
+**                  services.
+**
+** Returns          void
+**
+*******************************************************************************/
+L2C_API extern void L2CA_Deregister (UINT16 psm);
+
+/*******************************************************************************
+**
+** Function         L2CA_AllocatePSM
+**
+** Description      Other layers call this function to find an unused PSM for L2CAP
+**                  services.
+**
+** Returns          PSM to use.
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_AllocatePSM(void);
+
+/*******************************************************************************
+**
+** Function         L2CA_ConnectReq
+**
+** Description      Higher layers call this function to create an L2CAP connection.
+**                  Note that the connection is not established at this time, but
+**                  connection establishment gets started. The callback function
+**                  will be invoked when connection establishes or fails.
+**
+** Returns          the CID of the connection, or 0 if it failed to start
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr);
+
+/*******************************************************************************
+**
+** Function         L2CA_ConnectRsp
+**
+** Description      Higher layers call this function to accept an incoming
+**                  L2CAP connection, for which they had gotten an connect
+**                  indication callback.
+**
+** Returns          TRUE for success, FALSE for failure
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid,
+                                        UINT16 result, UINT16 status);
+
+/*******************************************************************************
+**
+** Function         L2CA_ErtmConnectReq
+**
+** Description      Higher layers call this function to create an L2CAP connection
+**                  that needs to use Enhanced Retransmission Mode.
+**                  Note that the connection is not established at this time, but
+**                  connection establishment gets started. The callback function
+**                  will be invoked when connection establishes or fails.
+**
+** Returns          the CID of the connection, or 0 if it failed to start
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr,
+                                           tL2CAP_ERTM_INFO *p_ertm_info);
+
+/*******************************************************************************
+**
+** Function         L2CA_ErtmConnectRsp
+**
+** Description      Higher layers call this function to accept an incoming
+**                  L2CAP connection, for which they had gotten an connect
+**                  indication callback, and for which the higher layer wants
+**                  to use Enhanced Retransmission Mode.
+**
+** Returns          TRUE for success, FALSE for failure
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN  L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid,
+                                             UINT16 result, UINT16 status,
+                                             tL2CAP_ERTM_INFO *p_ertm_info);
+
+/*******************************************************************************
+**
+** Function         L2CA_ConfigReq
+**
+** Description      Higher layers call this function to send configuration.
+**
+** Returns          TRUE if configuration sent, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg);
+
+/*******************************************************************************
+**
+** Function         L2CA_ConfigRsp
+**
+** Description      Higher layers call this function to send a configuration
+**                  response.
+**
+** Returns          TRUE if configuration response sent, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg);
+
+/*******************************************************************************
+**
+** Function         L2CA_DisconnectReq
+**
+** Description      Higher layers call this function to disconnect a channel.
+**
+** Returns          TRUE if disconnect sent, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_DisconnectReq (UINT16 cid);
+
+/*******************************************************************************
+**
+** Function         L2CA_DisconnectRsp
+**
+** Description      Higher layers call this function to acknowledge the
+**                  disconnection of a channel.
+**
+** Returns          void
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_DisconnectRsp (UINT16 cid);
+
+/*******************************************************************************
+**
+** Function         L2CA_DataWrite
+**
+** Description      Higher layers call this function to write data.
+**
+** Returns          L2CAP_DW_SUCCESS, if data accepted, else FALSE
+**                  L2CAP_DW_CONGESTED, if data accepted and the channel is congested
+**                  L2CAP_DW_FAILED, if error
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data);
+
+/*******************************************************************************
+**
+** Function         L2CA_Ping
+**
+** Description      Higher layers call this function to send an echo request.
+**
+** Returns          TRUE if echo request sent, else FALSE.
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         L2CA_Echo
+**
+** Description      Higher layers call this function to send an echo request
+**                  with application-specific data.
+**
+** Returns          TRUE if echo request sent, else FALSE.
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN  L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetIdleTimeout
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a connection, or for all future connections. The "idle timeout"
+**                  is the amount of time that a connection can remain up with
+**                  no L2CAP channels on it. A timeout of zero means that the
+**                  connection will be torn down immediately when the last channel
+**                  is removed. A timeout of 0xFFFF means no timeout. Values are
+**                  in seconds.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout,
+                                            BOOLEAN is_global);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetIdleTimeoutByBdAddr
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a connection. The "idle timeout" is the amount of time that
+**                  a connection can remain up with no L2CAP channels on it.
+**                  A timeout of zero means that the connection will be torn
+**                  down immediately when the last channel is removed.
+**                  A timeout of 0xFFFF means no timeout. Values are in seconds.
+**                  A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
+**                  then the idle timeouts for all active l2cap links will be
+**                  changed.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+** NOTE             This timeout applies to all logical channels active on the
+**                  ACL link.
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetTraceLevel
+**
+** Description      This function sets the trace level for L2CAP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_SetTraceLevel (UINT8 trace_level);
+
+/*******************************************************************************
+**
+** Function     L2CA_SetDesireRole
+**
+** Description  This function sets the desire role for L2CAP.
+**              If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on
+**              HciCreateConnection.
+**              If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on
+**              HciCreateConnection.
+**
+**              If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE),
+**              the desire role is set to the new value. Otherwise, it is not changed.
+**
+** Returns      the new (current) role
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_SetDesireRole (UINT8 new_role);
+
+/*******************************************************************************
+**
+** Function     L2CA_LocalLoopbackReq
+**
+** Description  This function sets up a CID for local loopback
+**
+** Returns      CID of 0 if none.
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr);
+
+/*******************************************************************************
+**
+** Function     L2CA_FlushChannel
+**
+** Description  This function flushes none, some or all buffers queued up
+**              for xmission for a particular CID. If called with
+**              L2CAP_FLUSH_CHANS_GET (0), it simply returns the number
+**              of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff)
+**              flushes all buffers.  All other values specifies the maximum
+**              buffers to flush.
+**
+** Returns      Number of buffers left queued for that CID
+**
+*******************************************************************************/
+L2C_API extern UINT16   L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush);
+
+
+/*******************************************************************************
+**
+** Function         L2CA_SetAclPriority
+**
+** Description      Sets the transmission priority for an ACL channel.
+**                  (For initial implementation only two values are valid.
+**                  L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority);
+
+/*******************************************************************************
+**
+** Function         L2CA_FlowControl
+**
+** Description      Higher layers call this function to flow control a channel.
+**
+**                  data_enabled - TRUE data flows, FALSE data is stopped
+**
+** Returns          TRUE if valid channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled);
+
+/*******************************************************************************
+**
+** Function         L2CA_SendTestSFrame
+**
+** Description      Higher layers call this function to send a test S-frame.
+**
+** Returns          TRUE if valid Channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SendTestSFrame (UINT16 cid, BOOLEAN rr_or_rej,
+                                            UINT8 back_track);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetTxPriority
+**
+** Description      Sets the transmission priority for a channel. (FCR Mode)
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority);
+
+/*******************************************************************************
+**
+** Function         L2CA_RegForNoCPEvt
+**
+** Description      Register callback for Number of Completed Packets event.
+**
+** Input Param      p_cb - callback for Number of completed packets event
+**                  p_bda - BT address of remote device
+**
+** Returns
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetChnlDataRate
+**
+** Description      Sets the tx/rx data rate for a channel.
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx);
+
+typedef void (tL2CA_RESERVE_CMPL_CBACK) (void);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetFlushTimeout
+**
+** Description      This function set the automatic flush time out in Baseband
+**                  for ACL-U packets.
+**                  BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY
+**                           then the flush time out will be applied to all ACL link.
+**                  FlushTimeout: flush time out in ms
+**                           0x0000 : No automatic flush
+**                           L2CAP_NO_RETRANSMISSION : No retransmission
+**                           0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5)
+**                                    <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot).
+**                                    Otherwise, return FALSE.
+**                           L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+** NOTE             This flush timeout applies to all logical channels active on the
+**                  ACL link.
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout);
+
+/*******************************************************************************
+**
+** Function         L2CA_DataWriteEx
+**
+** Description      Higher layers call this function to write data with extended
+**                  flags.
+**                  flags : L2CAP_FLUSHABLE_CH_BASED
+**                          L2CAP_FLUSHABLE_PKT
+**                          L2CAP_NON_FLUSHABLE_PKT
+**
+** Returns          L2CAP_DW_SUCCESS, if data accepted, else FALSE
+**                  L2CAP_DW_CONGESTED, if data accepted and the channel is congested
+**                  L2CAP_DW_FAILED, if error
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetChnlFlushability
+**
+** Description      Higher layers call this function to set a channels
+**                  flushability flags
+**
+** Returns          TRUE if CID found, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable);
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetPeerFeatures
+**
+**  Description      Get a peers features and fixed channel map
+**
+**  Parameters:      BD address of the peer
+**                   Pointers to features and channel mask storage area
+**
+**  Return value:    TRUE if peer is connected
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask);
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetBDAddrbyHandle
+**
+**  Description      Get BD address for the given HCI handle
+**
+**  Parameters:      HCI handle
+**                   BD address of the peer
+**
+**  Return value:    TRUE if found lcb for the given handle, FALSE otherwise
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetChnlFcrMode
+**
+**  Description      Get the channel FCR mode
+**
+**  Parameters:      Local CID
+**
+**  Return value:    Channel mode
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_GetChnlFcrMode (UINT16 lcid);
+
+
+/*******************************************************************************
+**
+**                      UCD callback prototypes
+**
+*******************************************************************************/
+
+/* UCD discovery. Parameters are
+**      BD Address of remote
+**      Data Type
+**      Data
+*/
+#define L2CAP_UCD_INFO_TYPE_RECEPTION   0x01
+#define L2CAP_UCD_INFO_TYPE_MTU         0x02
+
+typedef void (tL2CA_UCD_DISCOVER_CB) (BD_ADDR, UINT8, UINT32);
+
+/* UCD data received. Parameters are
+**      BD Address of remote
+**      Pointer to buffer with data
+*/
+typedef void (tL2CA_UCD_DATA_CB) (BD_ADDR, BT_HDR *);
+
+/* Congestion status callback protype. This callback is optional. If
+** an application tries to send data when the transmit queue is full,
+** the data will anyways be dropped. The parameter is:
+**              remote BD_ADDR
+**              TRUE if congested, FALSE if uncongested
+*/
+typedef void (tL2CA_UCD_CONGESTION_STATUS_CB) (BD_ADDR, BOOLEAN);
+
+/* UCD registration info (the callback addresses and PSM)
+*/
+typedef struct
+{
+    tL2CA_UCD_DISCOVER_CB           *pL2CA_UCD_Discover_Cb;
+    tL2CA_UCD_DATA_CB               *pL2CA_UCD_Data_Cb;
+    tL2CA_UCD_CONGESTION_STATUS_CB  *pL2CA_UCD_Congestion_Status_Cb;
+} tL2CAP_UCD_CB_INFO;
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdRegister
+**
+**  Description     Register PSM on UCD.
+**
+**  Parameters:     tL2CAP_UCD_CB_INFO
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info );
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDeregister
+**
+**  Description     Deregister PSM on UCD.
+**
+**  Parameters:     PSM
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UcdDeregister ( UINT16 psm );
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDiscover
+**
+**  Description     Discover UCD of remote device.
+**
+**  Parameters:     PSM
+**                  BD_ADDR of remote device
+**                  info_type : L2CAP_UCD_INFO_TYPE_RECEPTION
+**                              L2CAP_UCD_INFO_TYPE_MTU
+**
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type );
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDataWrite
+**
+**  Description     Send UCD to remote device
+**
+**  Parameters:     PSM
+**                  BD Address of remote
+**                  Pointer to buffer of type BT_HDR
+**                  flags : L2CAP_FLUSHABLE_CH_BASED
+**                          L2CAP_FLUSHABLE_PKT
+**                          L2CAP_NON_FLUSHABLE_PKT
+**
+** Return value     L2CAP_DW_SUCCESS, if data accepted
+**                  L2CAP_DW_FAILED,  if error
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags);
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdSetIdleTimeout
+**
+**  Description     Set UCD Idle timeout.
+**
+**  Parameters:     BD Addr
+**                  Timeout in second
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout );
+
+/*******************************************************************************
+**
+** Function         L2CA_UCDSetTxPriority
+**
+** Description      Sets the transmission priority for a connectionless channel.
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority );
+
+
+/*******************************************************************************
+**
+**                      Fixed Channel callback prototypes
+**
+*******************************************************************************/
+
+/* Fixed channel connected and disconnected. Parameters are
+**      BD Address of remote
+**      TRUE if channel is connected, FALSE if disconnected
+**      Reason for connection failure
+*/
+typedef void (tL2CA_FIXED_CHNL_CB) (BD_ADDR, BOOLEAN, UINT16);
+
+/* Signalling data received. Parameters are
+**      BD Address of remote
+**      Pointer to buffer with data
+*/
+typedef void (tL2CA_FIXED_DATA_CB) (BD_ADDR, BT_HDR *);
+
+/* Fixed channel registration info (the callback addresses and channel config)
+*/
+typedef struct
+{
+    tL2CA_FIXED_CHNL_CB    *pL2CA_FixedConn_Cb;
+    tL2CA_FIXED_DATA_CB    *pL2CA_FixedData_Cb;
+    tL2CAP_FCR_OPTS         fixed_chnl_opts;
+
+    UINT16                  default_idle_tout;
+} tL2CAP_FIXED_CHNL_REG;
+
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+/*******************************************************************************
+**
+**  Function        L2CA_RegisterFixedChannel
+**
+**  Description     Register a fixed channel.
+**
+**  Parameters:     Fixed Channel #
+**                  Channel Callbacks and config
+**
+**  Return value:   TRUE if registered OK
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN  L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg);
+
+/*******************************************************************************
+**
+**  Function        L2CA_ConnectFixedChnl
+**
+**  Description     Connect an fixed signalling channel to a remote device.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**
+**  Return value:   TRUE if connection started
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+**  Function        L2CA_SendFixedChnlData
+**
+**  Description     Write data on a fixed signalling channel.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**                  Pointer to buffer of type BT_HDR
+**
+** Return value     L2CAP_DW_SUCCESS, if data accepted
+**                  L2CAP_DW_FAILED,  if error
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf);
+
+/*******************************************************************************
+**
+**  Function        L2CA_RemoveFixedChnl
+**
+**  Description     Remove a fixed channel to a remote device.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**                  Idle timeout to use (or 0xFFFF if don't care)
+**
+**  Return value:   TRUE if channel removed
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda);
+
+/*******************************************************************************
+**
+** Function         L2CA_SetFixedChannelTout
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a fixed channel. The "idle timeout" is the amount of time that
+**                  a connection can remain up with no L2CAP channels on it.
+**                  A timeout of zero means that the connection will be torn
+**                  down immediately when the last channel is removed.
+**                  A timeout of 0xFFFF means no timeout. Values are in seconds.
+**                  A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
+**                  then the idle timeouts for all active l2cap links will be
+**                  changed.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout);
+
+#endif /* (L2CAP_NUM_FIXED_CHNLS > 0) */
+
+/*******************************************************************************
+**
+** Function     L2CA_GetCurrentConfig
+**
+** Description  This function returns configurations of L2CAP channel
+**              pp_our_cfg : pointer of our saved configuration options
+**              p_our_cfg_bits : valid config in bitmap
+**              pp_peer_cfg: pointer of peer's saved configuration options
+**              p_peer_cfg_bits : valid config in bitmap
+**
+** Returns      TRUE if successful
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid,
+                                              tL2CAP_CFG_INFO **pp_our_cfg,  tL2CAP_CH_CFG_BITS *p_our_cfg_bits,
+                                              tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits);
+
+#if (L2CAP_CORRUPT_ERTM_PKTS == TRUE)
+/*******************************************************************************
+**
+** Function         L2CA_SetupErtmTest
+**
+** Description      This function is used for testing purposes only.
+**                  It corrupts or drops one or more packets used with ERTM channels.
+**
+** Parameters
+**                  cid - channel ID  (0 uses RFCOMM PSM's CID)
+**
+**                  type - type of test to run (L2CAP_FCR_TTYPE_CORR_IFRAMES
+**                                              L2CAP_FCR_TTYPE_CORR_SFRAME
+**                                              L2CAP_FCR_TTYPE_STOP_TEST
+**                                              L2CAP_FCR_TTYPE_GET_CID - returns rfcomm cid only)
+**
+**                  is_rx  - TRUE to corrupt Rx packet, FALSE for Tx packet)
+**
+**                  freq - L2CAP_FCR_FREQ_RANDOM    (turns on random corruptions/drops)
+**                         L2CAP_FCR_FREQ_NORMAL    (turns on test with "count" corruptions/drops)
+**
+**                  count - number of packets in a row to drop or corrupt
+**
+** Returns          CID of channel running test
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_SetupErtmTest (UINT16 cid, UINT8 type, BOOLEAN is_rx, UINT8 freq, UINT16 count);
+
+/*******************************************************************************
+**
+** Function         L2CA_SendPolledSFrame
+**
+** Description      This function is used for testing purposes only.
+**                  It Sends a Polled RR or RNR to the peer
+**
+** Parameters
+**                  cid - channel ID
+**
+**                  sup_type - (L2CAP_FCR_SUP_RR or L2CAP_FCR_SUP_RNR)
+**
+** Returns          void
+**
+*******************************************************************************/
+L2C_API extern void L2CA_SendPolledSFrame (UINT16 cid, UINT16 sup_type);
+
+/*******************************************************************************
+**
+** Function         L2CA_BypassSFrame
+**
+** Description      This function is used for testing purposes only.
+**                  It skips sending 'count' S-Frames.
+**
+** Parameters
+**                  cid - channel ID
+**
+**                  count - Number of S-Frames to skip sending
+**
+** Returns          void
+**
+*******************************************************************************/
+L2C_API extern void L2CA_BypassSFrame (UINT16 cid, UINT8 count);
+
+#endif /* (L2CAP_CORRUPT_ERTM_PKTS == TRUE) */
+
+
+#if (BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+**  Function        L2CA_CancelBleConnectReq
+**
+**  Description     Cancel a pending connection attempt to a BLE device.
+**
+**  Parameters:     BD Address of remote
+**
+**  Return value:   TRUE if connection was cancelled
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda);
+
+/*******************************************************************************
+**
+**  Function        L2CA_UpdateBleConnParams
+**
+**  Description     Update BLE connection parameters.
+**
+**  Parameters:     BD Address of remote
+**
+**  Return value:   TRUE if update started
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bdRa, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout);
+
+/*******************************************************************************
+**
+**  Function        L2CA_EnableUpdateBleConnParams
+**
+**  Description     Update BLE connection parameters.
+**
+**  Parameters:     BD Address of remote
+**                  enable flag
+**
+**  Return value:   TRUE if update started
+**
+*******************************************************************************/
+L2C_API extern BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable);
+
+/*******************************************************************************
+**
+** Function         L2CA_GetBleConnRole
+**
+** Description      This function returns the connection role.
+**
+** Returns          link role.
+**
+*******************************************************************************/
+L2C_API extern UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         L2CA_GetDisconnectReason
+**
+** Description      This function returns the disconnect reason code.
+**
+** Returns          disconnect reason
+**
+*******************************************************************************/
+L2C_API extern UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda);
+
+#endif /* (BLE_INCLUDED == TRUE) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* L2C_API_H */
diff --git a/stack/include/l2cdefs.h b/stack/include/l2cdefs.h
new file mode 100644
index 0000000..fe41476
--- /dev/null
+++ b/stack/include/l2cdefs.h
@@ -0,0 +1,309 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef L2CDEFS_H
+#define L2CDEFS_H
+
+/* L2CAP command codes
+*/
+#define L2CAP_CMD_REJECT                    0x01
+#define L2CAP_CMD_CONN_REQ                  0x02
+#define L2CAP_CMD_CONN_RSP                  0x03
+#define L2CAP_CMD_CONFIG_REQ                0x04
+#define L2CAP_CMD_CONFIG_RSP                0x05
+#define L2CAP_CMD_DISC_REQ                  0x06
+#define L2CAP_CMD_DISC_RSP                  0x07
+#define L2CAP_CMD_ECHO_REQ                  0x08
+#define L2CAP_CMD_ECHO_RSP                  0x09
+#define L2CAP_CMD_INFO_REQ                  0x0A
+#define L2CAP_CMD_INFO_RSP                  0x0B
+#define L2CAP_CMD_AMP_CONN_REQ              0x0C
+#define L2CAP_CMD_AMP_CONN_RSP              0x0D
+#define L2CAP_CMD_AMP_MOVE_REQ              0x0E
+#define L2CAP_CMD_AMP_MOVE_RSP              0x0F
+#define L2CAP_CMD_AMP_MOVE_CFM              0x10
+#define L2CAP_CMD_AMP_MOVE_CFM_RSP          0x11
+#define L2CAP_CMD_BLE_UPDATE_REQ            0x12
+#define L2CAP_CMD_BLE_UPDATE_RSP            0x13
+
+
+/* Define some packet and header lengths
+*/
+#define L2CAP_PKT_OVERHEAD      4           /* Length and CID                       */
+#define L2CAP_CMD_OVERHEAD      4           /* Cmd code, Id and length              */
+#define L2CAP_CMD_REJECT_LEN    2           /* Reason (data is optional)            */
+#define L2CAP_CONN_REQ_LEN      4           /* PSM and source CID                   */
+#define L2CAP_CONN_RSP_LEN      8           /* Dest CID, source CID, reason, status */
+#define L2CAP_CONFIG_REQ_LEN    4           /* Dest CID, flags (data is optional)   */
+#define L2CAP_CONFIG_RSP_LEN    6           /* Dest CID, flags, result,data optional*/
+#define L2CAP_DISC_REQ_LEN      4           /* Dest CID, source CID                 */
+#define L2CAP_DISC_RSP_LEN      4           /* Dest CID, source CID                 */
+#define L2CAP_ECHO_REQ_LEN      0           /* Data is optional                     */
+#define L2CAP_ECHO_RSP_LEN      0           /* Data is optional                     */
+#define L2CAP_INFO_REQ_LEN      2           /* Info type                            */
+#define L2CAP_INFO_RSP_LEN      4           /* Info type, result (data is optional) */
+#define L2CAP_BCST_OVERHEAD     2           /* Additional broadcast packet overhead */
+#define L2CAP_UCD_OVERHEAD      2           /* Additional connectionless packet overhead */
+
+#define L2CAP_AMP_CONN_REQ_LEN  5           /* PSM, CID, and remote controller ID   */
+#define L2CAP_AMP_MOVE_REQ_LEN  3           /* CID and remote controller ID         */
+#define L2CAP_AMP_MOVE_RSP_LEN  4           /* CID and result                       */
+#define L2CAP_AMP_MOVE_CFM_LEN  4           /* CID and result                       */
+#define L2CAP_AMP_MOVE_CFM_RSP_LEN  2       /* CID                                  */
+
+#define L2CAP_CMD_BLE_UPD_REQ_LEN   8       /* Min and max interval, latency, tout  */
+#define L2CAP_CMD_BLE_UPD_RSP_LEN   2       /* Result                               */
+
+
+/* Define the packet boundary flags
+*/
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+#define L2CAP_PKT_START_FLUSHABLE       2
+#define L2CAP_PKT_START_NON_FLUSHABLE   0
+#endif
+#define L2CAP_COMPLETE_AMP_PKT          3       /* complete L2CAP packet on AMP HCI */
+#define L2CAP_PKT_START                 2
+#define L2CAP_PKT_CONTINUE              1
+#define L2CAP_MASK_FLAG            0x0FFF
+#define L2CAP_PKT_TYPE_SHIFT            12
+#define L2CAP_PKT_TYPE_MASK             3
+
+
+/* Define the L2CAP connection result codes
+*/
+#define L2CAP_CONN_OK                0
+#define L2CAP_CONN_PENDING           1
+#define L2CAP_CONN_NO_PSM            2
+#define L2CAP_CONN_SECURITY_BLOCK    3
+#define L2CAP_CONN_NO_RESOURCES      4
+#define L2CAP_CONN_BAD_CTLR_ID       5              /* AMP related */
+#define L2CAP_CONN_TIMEOUT           0xEEEE
+#define L2CAP_CONN_AMP_FAILED        254
+#define L2CAP_CONN_NO_LINK           255        /* Add a couple of our own for internal use */
+#define L2CAP_CONN_CANCEL            256        /* L2CAP connection cancelled */
+
+
+/* Define L2CAP Move Channel Response result codes
+*/
+#define L2CAP_MOVE_OK                   0
+#define L2CAP_MOVE_PENDING              1
+#define L2CAP_MOVE_CTRL_ID_NOT_SUPPORT  2
+#define L2CAP_MOVE_SAME_CTRLR_ID        3
+#define L2CAP_MOVE_CONFIG_NOT_SUPPORTED 4
+#define L2CAP_MOVE_CHAN_COLLISION       5
+#define L2CAP_MOVE_NOT_ALLOWED          6
+
+
+/* Define L2CAP Move Channel Confirmation result codes
+*/
+#define L2CAP_MOVE_CFM_OK               0
+#define L2CAP_MOVE_CFM_REFUSED          1
+
+
+/* Define the L2CAP command reject reason codes
+*/
+#define L2CAP_CMD_REJ_NOT_UNDERSTOOD    0
+#define L2CAP_CMD_REJ_MTU_EXCEEDED      1
+#define L2CAP_CMD_REJ_INVALID_CID       2
+
+
+/* L2CAP Predefined CIDs  (0x0004-0x003E Reserved)
+*/
+#define L2CAP_SIGNALLING_CID            1
+#define L2CAP_CONNECTIONLESS_CID        2
+#define L2CAP_AMP_CID                   3
+#define L2CAP_ATT_CID                   4
+#define L2CAP_BLE_SIGNALLING_CID        5
+#define L2CAP_SMP_CID                   6
+#define L2CAP_AMP_TEST_CID              0x003F
+#define L2CAP_BASE_APPL_CID             0x0040
+
+/* Fixed Channels mask bits
+*/
+#define L2CAP_FIXED_CHNL_SIG_BIT        (1 << L2CAP_SIGNALLING_CID)     /* Signal Channel Supported (Mandatory) */
+#define L2CAP_FIXED_CHNL_CNCTLESS_BIT   (1 << L2CAP_CONNECTIONLESS_CID) /* Connectionless Reception             */
+#define L2CAP_FIXED_CHNL_AMP_BIT        (1 << L2CAP_AMP_CID)            /* AMP Manager Supported                */
+#define L2CAP_FIXED_CHNL_ATT_BIT        (1 << L2CAP_ATT_CID)            /* Attribute protocol Supported         */
+#define L2CAP_FIXED_CHNL_BLE_SIG_BIT    (1 << L2CAP_BLE_SIGNALLING_CID) /* BLE Signalling Supported             */
+#define L2CAP_FIXED_CHNL_SMP_BIT        (1 << L2CAP_SMP_CID)            /* BLE Security Manager Supported       */
+
+
+
+/* Define the L2CAP configuration result codes
+*/
+#define L2CAP_CFG_OK                    0
+#define L2CAP_CFG_UNACCEPTABLE_PARAMS   1
+#define L2CAP_CFG_FAILED_NO_REASON      2
+#define L2CAP_CFG_UNKNOWN_OPTIONS       3
+#define L2CAP_CFG_PENDING               4
+#define L2CAP_CFG_FLOW_SPEC_REJECTED    5
+
+
+/* Define the L2CAP configuration option types
+*/
+#define L2CAP_CFG_TYPE_MTU              0x01
+#define L2CAP_CFG_TYPE_FLUSH_TOUT       0x02
+#define L2CAP_CFG_TYPE_QOS              0x03
+#define L2CAP_CFG_TYPE_FCR              0x04
+#define L2CAP_CFG_TYPE_FCS              0x05
+#define L2CAP_CFG_TYPE_EXT_FLOW         0x06
+#define L2CAP_CFG_TYPE_EXT_WIN_SIZE     0x07
+
+#define L2CAP_CFG_MTU_OPTION_LEN        2           /* MTU option length    */
+#define L2CAP_CFG_FLUSH_OPTION_LEN      2           /* Flush option len     */
+#define L2CAP_CFG_QOS_OPTION_LEN        22          /* QOS option length    */
+#define L2CAP_CFG_FCR_OPTION_LEN        9           /* FCR option length    */
+#define L2CAP_CFG_FCS_OPTION_LEN        1           /* FCR option length    */
+#define L2CAP_CFG_EXT_FLOW_OPTION_LEN   16          /* Extended Flow Spec   */
+#define L2CAP_CFG_EXT_WIN_SIZE_LEN      2           /* Ext window size length */
+#define L2CAP_CFG_OPTION_OVERHEAD       2           /* Type and length      */
+
+/* Configuration Cmd/Rsp Flags mask
+*/
+#define L2CAP_CFG_FLAGS_MASK_CONT       0x0001      /* Flags mask: Continuation */
+
+/* FCS Check Option values
+*/
+#define L2CAP_CFG_FCS_BYPASS            0       /* Bypass the FCS in streaming or ERTM modes */
+#define L2CAP_CFG_FCS_USE               1       /* Use the FCS in streaming or ERTM modes [default] */
+
+/* Default values for configuration
+*/
+#define L2CAP_NO_AUTOMATIC_FLUSH        0xFFFF
+#define L2CAP_NO_RETRANSMISSION         0x0001
+
+#define L2CAP_DEFAULT_MTU               (672)
+#define L2CAP_DEFAULT_FLUSH_TO          L2CAP_NO_AUTOMATIC_FLUSH
+#define L2CAP_DEFAULT_SERV_TYPE         1
+#define L2CAP_DEFAULT_TOKEN_RATE        0
+#define L2CAP_DEFAULT_BUCKET_SIZE       0
+#define L2CAP_DEFAULT_PEAK_BANDWIDTH    0
+#define L2CAP_DEFAULT_LATENCY           0xFFFFFFFF
+#define L2CAP_DEFAULT_DELAY             0xFFFFFFFF
+#define L2CAP_DEFAULT_FCS               L2CAP_CFG_FCS_USE
+
+
+/* Define the L2CAP disconnect result codes
+*/
+#define L2CAP_DISC_OK                   0
+#define L2CAP_DISC_TIMEOUT              0xEEEE
+
+/* Define the L2CAP info resp result codes
+*/
+#define L2CAP_INFO_RESP_RESULT_SUCCESS          0
+#define L2CAP_INFO_RESP_RESULT_NOT_SUPPORTED    1
+
+/* Define the info-type fields of information request & response
+*/
+#define L2CAP_CONNLESS_MTU_INFO_TYPE      0x0001
+#define L2CAP_EXTENDED_FEATURES_INFO_TYPE 0x0002    /* Used in Information Req/Response */
+#define L2CAP_FIXED_CHANNELS_INFO_TYPE    0x0003    /* Used in AMP                      */
+
+#define L2CAP_CONNLESS_MTU_INFO_SIZE           2    /* Connectionless MTU size          */
+#define L2CAP_EXTENDED_FEATURES_ARRAY_SIZE     4    /* Extended features array size     */
+#define L2CAP_FIXED_CHNL_ARRAY_SIZE            8    /* Fixed channel array size         */
+
+/* Extended features mask bits
+*/
+#define L2CAP_EXTFEA_RTRANS         0x00000001    /* Retransmission Mode (Not Supported)    */
+#define L2CAP_EXTFEA_FC             0x00000002    /* Flow Control Mode   (Not Supported)    */
+#define L2CAP_EXTFEA_QOS            0x00000004
+#define L2CAP_EXTFEA_ENH_RETRANS    0x00000008    /* Enhanced retransmission mode           */
+#define L2CAP_EXTFEA_STREAM_MODE    0x00000010    /* Streaming Mode                         */
+#define L2CAP_EXTFEA_NO_CRC         0x00000020    /* Optional FCS (if set No FCS desired)   */
+#define L2CAP_EXTFEA_EXT_FLOW_SPEC  0x00000040    /* Extended flow spec                     */
+#define L2CAP_EXTFEA_FIXED_CHNLS    0x00000080    /* Fixed channels                         */
+#define L2CAP_EXTFEA_EXT_WINDOW     0x00000100    /* Extended Window Size                   */
+#define L2CAP_EXTFEA_UCD_RECEPTION  0x00000200    /* Unicast Connectionless Data Reception  */
+
+/* Mask for locally supported features used in Information Response (default to none) */
+#ifndef L2CAP_EXTFEA_SUPPORTED_MASK
+#define L2CAP_EXTFEA_SUPPORTED_MASK 0
+#endif
+
+/* Mask for LE supported features used in Information Response (default to none) */
+#ifndef L2CAP_BLE_EXTFEA_MASK
+#define L2CAP_BLE_EXTFEA_MASK 0
+#endif
+
+/* Define a value that tells L2CAP to use the default HCI ACL buffer pool */
+#define L2CAP_DEFAULT_ERM_POOL_ID       0xFF
+/* Define a value that tells L2CAP to use the default MPS */
+#define L2CAP_DEFAULT_ERM_MPS           0x0000
+
+#define L2CAP_FCR_OVERHEAD         2   /* Control word                 */
+#define L2CAP_FCS_LEN              2   /* FCS takes 2 bytes */
+#define L2CAP_SDU_LEN_OVERHEAD     2   /* SDU length field is 2 bytes */
+#define L2CAP_SDU_LEN_OFFSET       2   /* SDU length offset is 2 bytes */
+#define L2CAP_EXT_CONTROL_OVERHEAD 4   /* Extended Control Field       */
+#define L2CAP_MAX_HEADER_FCS       (L2CAP_PKT_OVERHEAD + L2CAP_EXT_CONTROL_OVERHEAD + L2CAP_SDU_LEN_OVERHEAD + L2CAP_FCS_LEN)
+                                   /* length(2), channel(2), control(4), SDU length(2) FCS(2) */
+/* Part of L2CAP_MIN_OFFSET that is not part of L2CAP
+*/
+#define L2CAP_OFFSET_WO_L2HDR  (L2CAP_MIN_OFFSET-(L2CAP_PKT_OVERHEAD+L2CAP_FCR_OVERHEAD))
+
+/* SAR bits in the control word
+*/
+#define L2CAP_FCR_UNSEG_SDU    0x0000   /* Control word to begin with for unsegmented PDU*/
+#define L2CAP_FCR_START_SDU    0x4000   /* ...for Starting PDU of a semented SDU */
+#define L2CAP_FCR_END_SDU      0x8000   /* ...for ending PDU of a segmented SDU */
+#define L2CAP_FCR_CONT_SDU     0xc000   /* ...for continuation PDU of a segmented SDU */
+
+/* Supervisory frame types
+*/
+#define L2CAP_FCR_SUP_RR        0x0000   /* Supervisory frame - RR                          */
+#define L2CAP_FCR_SUP_REJ       0x0001   /* Supervisory frame - REJ                         */
+#define L2CAP_FCR_SUP_RNR       0x0002   /* Supervisory frame - RNR                         */
+#define L2CAP_FCR_SUP_SREJ      0x0003   /* Supervisory frame - SREJ                        */
+
+#define L2CAP_FCR_SAR_BITS           0xC000    /* Mask to get the SAR bits from control word */
+#define L2CAP_FCR_SAR_BITS_SHIFT     14        /* Bits to shift right to get the SAR bits from ctrl-word */
+
+#define L2CAP_FCR_S_FRAME_BIT         0x0001   /* Mask to check if a PDU is S-frame */
+#define L2CAP_FCR_REQ_SEQ_BITS        0x3F00   /* Mask to get the req-seq from control word */
+#define L2CAP_FCR_REQ_SEQ_BITS_SHIFT  8        /* Bits to shift right to get the req-seq from ctrl-word */
+#define L2CAP_FCR_TX_SEQ_BITS         0x007E   /* Mask on get the tx-seq from control word */
+#define L2CAP_FCR_TX_SEQ_BITS_SHIFT   1        /* Bits to shift right to get the tx-seq from ctrl-word */
+
+#define L2CAP_FCR_F_BIT               0x0080   /* F-bit in the control word (Sup and I frames)  */
+#define L2CAP_FCR_P_BIT               0x0010   /* P-bit in the control word (Sup frames only)   */
+
+#define L2CAP_FCR_F_BIT_SHIFT         7
+#define L2CAP_FCR_P_BIT_SHIFT         4
+
+#define L2CAP_FCR_SEG_BITS            0xC000   /* Mask to get the segmentation bits from ctrl-word */
+#define L2CAP_FCR_SUP_SHIFT           2        /* Bits to shift right to get the S-bits from ctrl-word */
+#define L2CAP_FCR_SUP_BITS            0x000C   /* Mask to get the supervisory bits from ctrl-word */
+
+#define L2CAP_FCR_INIT_CRC            0   /* Initial state of the CRC register */
+#define L2CAP_FCR_SEQ_MODULO          0x3F     /* Mask for sequence numbers (range 0 - 63) */
+
+/*************************************************************************************************
+** The following definitions are only used for internal testing of ERTM at the application level
+*************************************************************************************************/
+/* L2CA_SetupErtmTest() corruption test types */
+#define L2CAP_FCR_TTYPE_CORR_IFRAME     0       /* Corrupt one or more I-frames, based on count   */
+#define L2CAP_FCR_TTYPE_CORR_SFRAME     1       /* Corrupt an S-frame, (acknowledgement) */
+#define L2CAP_FCR_TTYPE_STOP_TEST       2       /* Used when turning off a test */
+#define L2CAP_FCR_TTYPE_GET_CID         3       /* Returns RFCOMM cid when '0' is passed in cid argument */
+
+/* L2CA_SetupErtmTest() Freq */
+#define L2CAP_FCR_FREQ_NORMAL           0       /* A single test is run */
+#define L2CAP_FCR_FREQ_RANDOM           1       /* Randomly loses or corrupts a packet */
+
+#endif
diff --git a/stack/include/mca_api.h b/stack/include/mca_api.h
new file mode 100644
index 0000000..d455e5b
--- /dev/null
+++ b/stack/include/mca_api.h
@@ -0,0 +1,495 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This interface file contains the interface to the Multi-Channel
+ *  Adaptation Protocol (MCAP).
+ *
+ ******************************************************************************/
+#ifndef MCA_API_H
+#define MCA_API_H
+
+#include "bt_target.h"
+#include "l2c_api.h"
+
+/* move the following to bt_target.h or other place later */
+#define MCA_NUM_TC_TBL  ((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS+1))
+#define MCA_NUM_CCBS	((MCA_NUM_REGS)*(MCA_NUM_LINKS))    /* Number of control channel control blocks	*/
+#define MCA_NUM_DCBS	((MCA_NUM_REGS)*(MCA_NUM_LINKS)*(MCA_NUM_MDLS)) /* Number of data channel control blocks */
+
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+/* API function return value result codes. */
+#define MCA_SUCCESS                0       /* Function successful */
+#define MCA_BAD_PARAMS             1       /* Invalid parameters */
+#define MCA_NO_RESOURCES           2       /* Not enough resources */
+#define MCA_BAD_HANDLE             3       /* Bad handle */
+#define MCA_BUSY                   4       /* A procedure is already in progress */
+#define MCA_WRITE_FAIL             5       /* Write failed */
+#define MCA_BAD_MDL_ID             6       /* MDL ID is not valid for the current API */
+typedef UINT8 tMCA_RESULT;
+
+/* MDEP data type.  */
+#define MCA_TDEP_ECHO              0       /* MDEP for echo test  */
+#define MCA_TDEP_DATA              1       /* MDEP for normal data */
+
+/* Control callback events. */
+#define MCA_ERROR_RSP_EVT           0       /* error response */
+#define MCA_CREATE_IND_EVT          1       /* create mdl indication */
+#define MCA_CREATE_CFM_EVT          2       /* create mdl confirm */
+#define MCA_RECONNECT_IND_EVT       3       /* reconnect mdl indication */
+#define MCA_RECONNECT_CFM_EVT       4       /* reconnect mdl confirm */
+#define MCA_ABORT_IND_EVT           5       /* abort mdl indication */
+#define MCA_ABORT_CFM_EVT           6       /* abort mdl confirm */
+#define MCA_DELETE_IND_EVT          7       /* delete mdl indication */
+#define MCA_DELETE_CFM_EVT          8       /* delete mdl confirm */
+
+#define MCA_SYNC_CAP_IND_EVT        0x11   /* request sync capabilities & requirements */
+#define MCA_SYNC_CAP_CFM_EVT        0x12   /* indicate completion */
+#define MCA_SYNC_SET_IND_EVT        0x13   /* request to set the time-stamp clock */
+#define MCA_SYNC_SET_CFM_EVT        0x14   /* indicate completion */
+#define MCA_SYNC_INFO_IND_EVT       0x15   /* update of the actual time-stamp clock instant from the sync slave */
+
+#define MCA_CONNECT_IND_EVT         0x20    /* Control channel connected */
+#define MCA_DISCONNECT_IND_EVT      0x21    /* Control channel disconnected */
+#define MCA_OPEN_IND_EVT            0x22    /* Data channel open indication */
+#define MCA_OPEN_CFM_EVT            0x23    /* Data channel open confirm */
+#define MCA_CLOSE_IND_EVT           0x24    /* Data channel close indication */
+#define MCA_CLOSE_CFM_EVT           0x25    /* Data channel close confirm */
+#define MCA_CONG_CHG_EVT            0x26    /* congestion change event */
+#define MCA_RSP_TOUT_IND_EVT        0x27    /* Control channel message response timeout */
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+typedef UINT8  tMCA_HANDLE; /* the handle for registration. 1 based index to rcb */
+typedef UINT8  tMCA_CL;     /* the handle for a control channel; reported at MCA_CONNECT_IND_EVT */
+typedef UINT8  tMCA_DEP;    /* the handle for MCA_CreateDep. This is also the local mdep_id */
+typedef UINT16 tMCA_DL;     /* the handle for the data channel. This is reported at MCA_OPEN_CFM_EVT or MCA_OPEN_IND_EVT */
+
+/* This is the data callback function.  It is executed when MCAP has a data
+** packet ready for the application.
+*/
+typedef void (tMCA_DATA_CBACK)(tMCA_DL mdl, BT_HDR *p_pkt);
+
+
+/* This structure contains parameters which are set at registration. */
+typedef struct {
+    UINT32      rsp_tout;   /* MCAP signaling response timeout */
+    UINT16      ctrl_psm;   /* L2CAP PSM for the MCAP control channel */
+    UINT16      data_psm;   /* L2CAP PSM for the MCAP data channel */
+    UINT16      sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
+} tMCA_REG;
+
+/* This structure contains parameters to create a MDEP. */
+typedef struct {
+    UINT8           type;       /* MCA_TDEP_DATA, or MCA_TDEP_ECHO. a regiatration may have only one MCA_TDEP_ECHO MDEP */
+    UINT8           max_mdl;    /* The maximum number of MDLs for this MDEP (max is MCA_NUM_MDLS) */
+    tMCA_DATA_CBACK *p_data_cback;  /* Data callback function */
+} tMCA_CS;
+
+#define MCA_FCS_NONE        0       /* fcs_present=FALSE */
+#define MCA_FCS_BYPASS      0x10    /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_BYPASS */
+#define MCA_FCS_USE         0x11    /* fcs_present=TRUE, fcs=L2CAP_CFG_FCS_USE */
+#define MCA_FCS_PRESNT_MASK 0x10    /* fcs_present=TRUE */
+#define MCA_FCS_USE_MASK    0x01    /* mask for fcs */
+typedef UINT8 tMCA_FCS_OPT;
+
+/* This structure contains L2CAP configuration parameters for the channel. */
+typedef struct {
+    tL2CAP_FCR_OPTS fcr_opt;
+    UINT8           user_rx_pool_id;
+    UINT8           user_tx_pool_id;
+    UINT8           fcr_rx_pool_id;
+    UINT8           fcr_tx_pool_id;
+    tMCA_FCS_OPT    fcs;
+    UINT16          data_mtu;   /* L2CAP MTU of the MCAP data channel */
+} tMCA_CHNL_CFG;
+
+
+/* Header structure for callback event parameters. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    UINT8           op_code;    /* The op (request/response) code */
+} tMCA_EVT_HDR;
+
+/* Response Header structure for callback event parameters. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    UINT8           op_code;    /* The op (request/response) code */
+    UINT8           rsp_code;   /* The response code */
+} tMCA_RSP_EVT;
+
+/* This data structure is associated with the MCA_CREATE_IND_EVT. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    UINT8           op_code;    /* The op (request/response) code */
+    UINT8           dep_id;     /* MDEP ID */
+    UINT8           cfg;        /* The configuration to negotiate */
+} tMCA_CREATE_IND;
+
+/* This data structure is associated with the MCA_CREATE_CFM_EVT. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    UINT8           op_code;    /* The op (request/response) code */
+    UINT8           rsp_code;   /* The response code. */
+    UINT8           cfg;        /* The configuration to negotiate */
+} tMCA_CREATE_CFM;
+
+/* This data structure is associated with MCA_CONNECT_IND_EVT. */
+typedef struct {
+    BD_ADDR         bd_addr;    /* The peer address */
+    UINT16          mtu;        /* peer mtu */
+} tMCA_CONNECT_IND;
+
+/* This data structure is associated with MCA_DISCONNECT_IND_EVT. */
+typedef struct {
+    BD_ADDR         bd_addr;    /* The peer address */
+    UINT16          reason;     /* disconnect reason given by L2CAP */
+} tMCA_DISCONNECT_IND;
+
+/* This data structure is associated with MCA_OPEN_IND_EVT, and MCA_OPEN_CFM_EVT. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    tMCA_DL         mdl;        /* The handle for the data channel */
+    UINT16          mtu;        /* peer mtu */
+} tMCA_DL_OPEN;
+
+/* This data structure is associated with MCA_CLOSE_IND_EVT and MCA_CLOSE_CFM_EVT. */
+typedef struct {
+    UINT16          mdl_id;     /* The associated MDL ID */
+    tMCA_DL         mdl;        /* The handle for the data channel */
+    UINT16          reason;     /* disconnect reason given by L2CAP */
+} tMCA_DL_CLOSE;
+
+/* This data structure is associated with MCA_CONG_CHG_EVT. */
+typedef struct {
+    UINT16          mdl_id;     /* N/A - This is a place holder */
+    tMCA_DL	        mdl;        /* The handle for the data channel */
+    BOOLEAN         cong;       /* TRUE, if the channel is congested */
+} tMCA_CONG_CHG;
+
+/* Union of all control callback event data structures */
+typedef union {
+    tMCA_EVT_HDR        hdr;
+    tMCA_RSP_EVT        rsp;
+    tMCA_CREATE_IND     create_ind;
+    tMCA_CREATE_CFM     create_cfm;
+    tMCA_EVT_HDR        reconnect_ind;
+    tMCA_RSP_EVT        reconnect_cfm;
+    tMCA_EVT_HDR        abort_ind;
+    tMCA_RSP_EVT        abort_cfm;
+    tMCA_EVT_HDR        delete_ind;
+    tMCA_RSP_EVT        delete_cfm;
+    tMCA_CONNECT_IND    connect_ind;
+    tMCA_DISCONNECT_IND disconnect_ind;
+    tMCA_DL_OPEN        open_ind;
+    tMCA_DL_OPEN        open_cfm;
+    tMCA_DL_CLOSE       close_ind;
+    tMCA_DL_CLOSE       close_cfm;
+    tMCA_CONG_CHG       cong_chg;
+} tMCA_CTRL;
+
+/* This is the control callback function.  This function passes control events
+** to the application.
+*/
+typedef void (tMCA_CTRL_CBACK)(tMCA_HANDLE handle, tMCA_CL mcl, UINT8 event,
+                                tMCA_CTRL *p_data);
+
+
+/*******************************************************************************
+**
+** Function         MCA_Init
+**
+** Description      Initialize MCAP internal control blocks.
+**                  This function is called at stack start up.
+**
+** Returns          void
+**
+*******************************************************************************/
+MCA_API extern void MCA_Init(void);
+
+/*******************************************************************************
+**
+** Function         MCA_SetTraceLevel
+**
+** Description      This function sets the debug trace level for MCA.
+**                  If 0xff is passed, the current trace level is returned.
+**
+**                  Input Parameters:
+**                      level:  The level to set the MCA tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+*******************************************************************************/
+MCA_API extern UINT8 MCA_SetTraceLevel (UINT8 level);
+
+/*******************************************************************************
+**
+** Function         MCA_Register
+**
+** Description      This function registers an MCAP implementation.
+**                  It is assumed that the control channel PSM and data channel
+**                  PSM are not used by any other instances of the stack.
+**                  If the given p_reg->ctrl_psm is 0, this handle is INT only.
+**
+** Returns          0, if failed. Otherwise, the MCA handle.
+**
+*******************************************************************************/
+MCA_API extern tMCA_HANDLE MCA_Register(tMCA_REG *p_reg, tMCA_CTRL_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         MCA_Deregister
+**
+** Description      This function is called to deregister an MCAP implementation.
+**                  Before this function can be called, all control and data
+**                  channels must be removed with MCA_DisconnectReq and MCA_CloseReq.
+**
+** Returns          void
+**
+*******************************************************************************/
+MCA_API extern void MCA_Deregister(tMCA_HANDLE handle);
+
+/*******************************************************************************
+**
+** Function         MCA_CreateDep
+**
+** Description      Create a data endpoint.  If the MDEP is created successfully,
+**                  the MDEP ID is returned in *p_dep. After a data endpoint is
+**                  created, an application can initiate a connection between this
+**                  endpoint and an endpoint on a peer device.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_CreateDep(tMCA_HANDLE handle, tMCA_DEP *p_dep, tMCA_CS *p_cs);
+
+/*******************************************************************************
+**
+** Function         MCA_DeleteDep
+**
+** Description      Delete a data endpoint.  This function is called when
+**                  the implementation is no longer using a data endpoint.
+**                  If this function is called when the endpoint is connected
+**                  the connection is closed and the data endpoint
+**                  is removed.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_DeleteDep(tMCA_HANDLE handle, tMCA_DEP dep);
+
+/*******************************************************************************
+**
+** Function         MCA_ConnectReq
+**
+** Description      This function initiates an MCAP control channel connection
+**                  to the peer device.  When the connection is completed, an
+**                  MCA_CONNECT_IND_EVT is reported to the application via its
+**                  control callback function.
+**                  This control channel is identified by tMCA_CL.
+**                  If the connection attempt fails, an MCA_DISCONNECT_IND_EVT is
+**                  reported. The security mask parameter overrides the outgoing
+**                  security mask set in MCA_Register().
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_ConnectReq(tMCA_HANDLE handle, BD_ADDR bd_addr,
+                                          UINT16 ctrl_psm,
+                                          UINT16 sec_mask);
+
+/*******************************************************************************
+**
+** Function         MCA_DisconnectReq
+**
+** Description      This function disconnect an MCAP control channel
+**                  to the peer device.
+**                  If associated data channel exists, they are disconnected.
+**                  When the MCL is disconnected an MCA_DISCONNECT_IND_EVT is
+**                  reported to the application via its control callback function.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_DisconnectReq(tMCA_CL mcl);
+
+/*******************************************************************************
+**
+** Function         MCA_CreateMdl
+**
+** Description      This function sends a CREATE_MDL request to the peer device.
+**                  When the response is received, a MCA_CREATE_CFM_EVT is reported
+**                  with the given MDL ID.
+**                  If the response is successful, a data channel is open
+**                  with the given p_chnl_cfg
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_CreateMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
+                                         UINT16 mdl_id, UINT8 peer_dep_id,
+                                         UINT8 cfg, const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*******************************************************************************
+**
+** Function         MCA_CreateMdlRsp
+**
+** Description      This function sends a CREATE_MDL response to the peer device
+**                  in response to a received MCA_CREATE_IND_EVT.
+**                  If the rsp_code is successful, a data channel is open
+**                  with the given p_chnl_cfg
+**                  When the data channel is open successfully, a MCA_OPEN_IND_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_CreateMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
+                                            UINT16 mdl_id, UINT8 cfg, UINT8 rsp_code,
+                                            const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*******************************************************************************
+**
+** Function         MCA_CloseReq
+**
+** Description      Close a data channel.  When the channel is closed, an
+**                  MCA_CLOSE_CFM_EVT is sent to the application via the
+**                  control callback function for this handle.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_CloseReq(tMCA_DL mdl);
+
+/*******************************************************************************
+**
+** Function         MCA_ReconnectMdl
+**
+** Description      This function sends a RECONNECT_MDL request to the peer device.
+**                  When the response is received, a MCA_RECONNECT_CFM_EVT is reported.
+**                  If the response is successful, a data channel is open.
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_ReconnectMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
+                                            UINT16 mdl_id, const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*******************************************************************************
+**
+** Function         MCA_ReconnectMdlRsp
+**
+** Description      This function sends a RECONNECT_MDL response to the peer device
+**                  in response to a MCA_RECONNECT_IND_EVT event.
+**                  If the response is successful, a data channel is open.
+**                  When the data channel is open successfully, a MCA_OPEN_IND_EVT
+**                  is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_ReconnectMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
+                                               UINT16 mdl_id, UINT8 rsp_code,
+                                               const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*******************************************************************************
+**
+** Function         MCA_DataChnlCfg
+**
+** Description      This function initiates a data channel connection toward the
+**                  connected peer device.
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_DataChnlCfg(tMCA_CL mcl, const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*******************************************************************************
+**
+** Function         MCA_Abort
+**
+** Description      This function sends a ABORT_MDL request to the peer device.
+**                  When the response is received, a MCA_ABORT_CFM_EVT is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_Abort(tMCA_CL mcl);
+
+/*******************************************************************************
+**
+** Function         MCA_Delete
+**
+** Description      This function sends a DELETE_MDL request to the peer device.
+**                  When the response is received, a MCA_DELETE_CFM_EVT is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_Delete(tMCA_CL mcl, UINT16 mdl_id);
+
+/*******************************************************************************
+**
+** Function         MCA_WriteReq
+**
+** Description      Send a data packet to the peer device.
+**
+**                  The application passes the packet using the BT_HDR structure.
+**                  The offset field must be equal to or greater than L2CAP_MIN_OFFSET.
+**                  This allows enough space in the buffer for the L2CAP header.
+**
+**                  The memory pointed to by p_pkt must be a GKI buffer
+**                  allocated by the application.  This buffer will be freed
+**                  by the protocol stack; the application must not free
+**                  this buffer.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+MCA_API extern tMCA_RESULT MCA_WriteReq(tMCA_DL mdl, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function         MCA_GetL2CapChannel
+**
+** Description      Get the L2CAP CID used by the given data channel handle.
+**
+** Returns          L2CAP channel ID if successful, otherwise 0.
+**
+*******************************************************************************/
+MCA_API extern UINT16 MCA_GetL2CapChannel (tMCA_DL mdl);
+
+#endif /* MCA_API_H */
diff --git a/stack/include/mca_defs.h b/stack/include/mca_defs.h
new file mode 100644
index 0000000..cca7fe0
--- /dev/null
+++ b/stack/include/mca_defs.h
@@ -0,0 +1,87 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This contains constants definitions and other information from the MCAP
+ *  specification.
+ *
+ ******************************************************************************/
+#ifndef MCA_DEFS_H
+#define MCA_DEFS_H
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+#define MCA_MIN_MTU                 48
+
+/* standard op codes */
+#define MCA_OP_ERROR_RSP            0x00   /* invalid opcode response */
+#define MCA_OP_MDL_CREATE_REQ       0x01   /* create an MDL, wait for an associated data channel connection */
+#define MCA_OP_MDL_CREATE_RSP       0x02   /* response to above request */
+#define MCA_OP_MDL_RECONNECT_REQ    0x03   /* req to prepare to rvc a data channel conn associated with a prev MDL */
+#define MCA_OP_MDL_RECONNECT_RSP    0x04   /* response to above request */
+#define MCA_OP_MDL_ABORT_REQ        0x05   /* stop waiting for a data channel connection */
+#define MCA_OP_MDL_ABORT_RSP        0x06   /* response to above request */
+#define MCA_OP_MDL_DELETE_REQ       0x07   /* delete an MDL */
+#define MCA_OP_MDL_DELETE_RSP       0x08   /* response to above request */
+#define MCA_NUM_STANDARD_OPCODE     (1+MCA_OP_MDL_DELETE_RSP)
+
+/* clock synchronization op codes */
+#define MCA_OP_SYNC_CAP_REQ         0x11   /* request sync capabilities & requirements */
+#define MCA_OP_SYNC_CAP_RSP         0x12   /* indicate completion */
+#define MCA_OP_SYNC_SET_REQ         0x13   /* request to set the time-stamp clock */
+#define MCA_OP_SYNC_SET_RSP         0x14   /* indicate completion */
+#define MCA_OP_SYNC_INFO_IND        0x15   /* update of the actual time-stamp clock instant from the sync slave */
+
+#define MCA_FIRST_SYNC_OP          MCA_OP_SYNC_CAP_REQ
+#define MCA_LAST_SYNC_OP           MCA_OP_SYNC_INFO_IND
+
+/* response code */
+#define MCA_RSP_SUCCESS     0x00    /* The corresponding request was received and processed successfully. */
+#define MCA_RSP_BAD_OPCODE  0x01    /* The Op Code received is not valid (i.e. neither a Standard Op Code nor a Clock Synchronization Protocol Op Code). */
+#define MCA_RSP_BAD_PARAM   0x02    /* One or more of the values in the received request is invalid. */
+/* MCA_RSP_BAD_PARAM shall be used when:
+- The request length is invalid
+- Some of the parameters have invalid values and none of the other defined Response Codes are more appropriate.
+*/
+#define MCA_RSP_BAD_MDEP    0x03    /* The MDEP ID referenced does not exist on this device. */
+#define MCA_RSP_MDEP_BUSY   0x04    /* The requested MDEP currently has as many active MDLs as it can manage simultaneously. */
+#define MCA_RSP_BAD_MDL     0x05    /* The MDL ID referenced is invalid. */
+/* MCA_RSP_BAD_MDL shall be used when:
+- A reserved or invalid value for MDL ID was used.
+- The MDL ID referenced is not available (was never created, has been deleted, or was otherwise lost),
+- The MDL ID referenced in the Abort request is not the same value that was used to initiate the PENDING state
+*/
+#define MCA_RSP_MDL_BUSY    0x06    /* The device is temporarily unable to complete the request. This is intended for reasons not related to the physical sensor (e.g. communication resources unavailable). */
+#define MCA_RSP_BAD_OP      0x07    /* The received request is invalid in the current state. */
+/* MCA_RSP_BAD_OP is used when
+- Abort request was received while not in the PENDING state.
+- Create, Reconnect, or Delete request was received while in the PENDING state.
+- A response is received when a request is expected
+*/
+#define MCA_RSP_NO_RESOURCE 0x08    /* The device is temporarily unable to complete the request. This is intended for reasons relating to the physical sensor (e.g. hardware fault, low battery), or when processing resources are temporarily committed to other processes. */
+#define MCA_RSP_ERROR       0x09    /* An internal error other than those listed in this table was encountered while processing the request. */
+#define MCA_RSP_NO_SUPPORT  0x0A    /* The Op Code that was used in this request is not supported. */
+#define MCA_RSP_CFG_REJ     0x0B    /* A configuration required by a MD_CREATE_MDL or MD_RECONNECT_MDL operation has been rejected. */
+
+#define MCA_MAX_MDEP_ID     0x7F    /* the valid range for MDEP ID is 1-0x7F */
+#define MCA_IS_VALID_MDL_ID(xxx)    (((xxx)>0) && ((xxx)<=0xFEFF))
+#define MCA_ALL_MDL_ID      0xFFFF
+
+#endif /* MCA_DEFS_H */
diff --git a/stack/include/obx_api.h b/stack/include/obx_api.h
new file mode 100644
index 0000000..472eeb0
--- /dev/null
+++ b/stack/include/obx_api.h
@@ -0,0 +1,1704 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef OBX_API_H
+#define OBX_API_H
+#include "bt_target.h"
+#include "bt_types.h"
+#include "l2c_api.h"
+
+/* 18 is 7/OBX_CONN_HDRS_OFFSET + 5/conn id, 2/ssn, 2/srm 2/srm_param */
+#define OBX_HDR_OFFSET              (18 + L2CAP_MIN_OFFSET)
+#define OBX_MAX_TRIPLET             3
+
+#define OBX_MIN_MTU                 255 /* per IrOBEX spec */
+#define OBX_MAX_MTU                 (OBX_LRG_DATA_POOL_SIZE - BT_HDR_SIZE - OBX_HDR_OFFSET)
+
+#define OBX_CONN_ID_SIZE            4
+#define OBX_PKT_LEN_SIZE            2
+
+#define OBX_CONN_HDRS_OFFSET        7
+#define OBX_SESS_HDRS_OFFSET        3
+#define OBX_DISCON_HDRS_OFFSET      3
+#define OBX_PUT_HDRS_OFFSET         3
+#define OBX_GET_HDRS_OFFSET         3
+#define OBX_SETPATH_REQ_HDRS_OFFSET 5
+#define OBX_ABORT_HDRS_OFFSET       3
+#define OBX_ACTION_HDRS_OFFSET      3
+#define OBX_RESPONSE_HDRS_OFFSET    3
+
+/* this is not needed if OBX_HDR_OFFSET is 18+ */
+#define OBX_MAX_CONN_HDR_EXTRA      8 /* 5/conn id, 2/ssn, 2/srm 2/srm_param - (5/setpath + 5/conn_id - 7/conn) */
+
+/* offset for header functions to access fields */
+#define OBX_CONNECT_MTU_OFFSET      5
+#define OBX_SETPATH_FLAG_OFFSET     3
+
+#define OBX_MAX_NUM_AUTH_TRIPLET    3
+#define OBX_UNICODE_SIZE            2 /* sizeof(UINT16) */
+
+#define OBX_INVALID_HDR_LEN         0xFFFF
+
+#define OBX_MIN_NONCE_SIZE          4   /* fixed size per IrOBEX spec */
+#define OBX_NONCE_SIZE              16  /* fixed size per IrOBEX spec */
+#define OBX_DIGEST_SIZE             16  /* fixed size per IrOBEX spec */
+#define OBX_MAX_AUTH_KEY_SIZE       16
+#define OBX_MAX_AUTH_USER_SIZE      20
+#define OBX_SESSION_ID_SIZE         16  /* fixed size per IrOBEX spec */
+#define OBX_SESSION_INFO_SIZE       32  /* OBX_SESSION_ID_SIZE + 4(local nonce) + 4 (connection id) + 4 (timeout) + 2(mtu) + 1(state) + 1(srm)  */
+#define OBX_SESSION_INFO_NONCE_IDX  16  /* The index to the (local nonce) in session info */
+#define OBX_SESSION_INFO_ID_IDX     20  /* The index to the (connection id) in session info */
+#define OBX_SESSION_INFO_TO_IDX     24  /* The index to the (timeout) in session info */
+#define OBX_SESSION_INFO_MTU_IDX    28  /* The index to peer MTU in session info */
+#define OBX_SESSION_INFO_ST_IDX     30  /* The index to sr/cl state in session info */
+#define OBX_SESSION_INFO_SRM_IDX    31  /* The index to srm in session info */
+#define OBX_TIMEOUT_SIZE            4
+
+/* handle related definitions */
+#define OBX_SESS_SHIFT              8
+#define OBX_ENC_SESS_HANDLE(oh, os) (((os)<<OBX_SESS_SHIFT)|(oh))
+#define OBX_HANDLE_MASK             0xFF
+#define OBX_SESS_MASK               0x7F00
+#define OBX_DEC_HANDLE(os)          ((os) & OBX_HANDLE_MASK)
+#define OBX_DEC_SESS_IND(os)        ((os & OBX_SESS_MASK)>>OBX_SESS_SHIFT)
+
+/* Return values for API functions */
+enum
+{
+    OBX_SUCCESS,        /* Status is successful. */
+    OBX_BAD_PARAMS,     /* Bad parameter(s). */
+    OBX_NO_RESOURCES,   /* No resources (GKI buffers, control block) */
+    OBX_BAD_HANDLE      /* The OBEX handle is not valid. */
+};
+typedef UINT8 tOBX_STATUS;
+
+
+typedef UINT16 tOBX_HANDLE;
+
+#define OBX_HANDLE_NULL             0
+
+enum
+{
+    OBX_PT_PUT,     /* Regular Put request */
+    OBX_PT_DELETE,  /* Delete request - a Put request with NO Body or End-of-Body header. */
+    OBX_PT_CREATE   /* Create-Empty request - a Put request with an empty End-of-Body header. */
+};
+typedef UINT8   tOBX_PUT_TYPE;
+
+/* SetPath Request Flags - the following definitions can be ORed if both flags are wanted */
+#define OBX_SPF_BACKUP      0x01    /* Backup a level before applying name(equivalent to ../) */
+#define OBX_SPF_NO_CREATE   0x02    /* Don't create directory if it does not exist, return an error instead. */
+typedef UINT8   tOBX_SETPATH_FLAG;
+
+/* Authentication Challenge Options */
+#define OBX_AO_NONE         0x00    /* If this is used in OBX_StartServer and the authenticate
+                                     * flag is TRUE, the optional Challenge Information (tag 0x01)
+                                     * will not be sent. */
+#define OBX_AO_USR_ID       0x01    /* Set this bit to make the client respond with the user ID. */
+typedef UINT8 tOBX_AUTH_OPT;
+
+/* CHARSET definition for Authentication Challenge Realm */
+#define OBX_RCS_ASCII       0x00    /* ASCII */
+#define OBX_RCS_8859_1      0x01    /* ISO-8859-1 */
+#define OBX_RCS_8859_2      0x02    /* ISO-8859-2 */
+#define OBX_RCS_8859_3      0x03    /* ISO-8859-3 */
+#define OBX_RCS_8859_4      0x04    /* ISO-8859-4 */
+#define OBX_RCS_8859_5      0x05    /* ISO-8859-5 */
+#define OBX_RCS_8859_6      0x06    /* ISO-8859-6 */
+#define OBX_RCS_8859_7      0x07    /* ISO-8859-7 */
+#define OBX_RCS_8859_8      0x08    /* ISO-8859-8 */
+#define OBX_RCS_8859_9      0x09    /* ISO-8859-9 */
+#define OBX_RCS_UNICODE     0xFF    /* Unicode */
+typedef UINT8 tOBX_CHARSET;
+
+typedef struct
+{
+    UINT8               ssn;        /* session sequence number */
+    BOOLEAN             final;      /* TRUE, if this is the final packet of this PUT transaction. */
+    tOBX_PUT_TYPE       type;       /* The type of PUT request. */
+} tOBX_PUT_EVT;
+
+typedef struct
+{
+    UINT8               ssn;        /* session sequence number */
+    BOOLEAN             final;      /* TRUE, if this is the final packet of this GET transaction. */
+} tOBX_GET_EVT;
+
+typedef struct
+{
+    UINT8               ssn;        /* session sequence number */
+    BD_ADDR             peer_addr;  /* The peer Bluetooth Address. */
+    UINT16              mtu;        /* The peer MTU. This element is associated with OBX_CONNECT_REQ_EVT and OBX_CONNECT_RSP_EVT. */
+    tOBX_HANDLE         handle;     /* the OBX handle returned by OBX_StartServer(), OBX_CreateSession() and OBX_ConnectReq() */
+    BOOLEAN             no_rsp;     /* TRUE, when the event is generated as a part of RESUME SESSION */
+} tOBX_CONN_EVT;
+
+/* Session Opcode Definitions: */
+#define OBX_SESS_OP_CREATE              0x00 /* Create Session */
+#define OBX_SESS_OP_CLOSE               0x01 /* Close Session */
+#define OBX_SESS_OP_SUSPEND             0x02 /* Suspend Session */
+#define OBX_SESS_OP_RESUME              0x03 /* Resume Session */
+#define OBX_SESS_OP_SET_TIME            0x04 /* Set Timeout */
+#define OBX_SESS_OP_TRANSPORT           0xFF /* transport dropped */
+typedef UINT8   tOBX_SESS_OP;
+
+/* Session States Definitions for external use: */
+enum
+{
+    OBX_SESS_NONE,       /* 0x00    session is not engaged/closed */
+    OBX_SESS_ACTIVE,     /* 0x01    session is active. */
+    OBX_SESS_SUSPENDED,  /* 0x02    session is suspended. */
+    OBX_SESS_EXT_MAX
+};
+typedef UINT8 tOBX_SESS_ST;
+
+
+typedef struct
+{
+    UINT8               ssn;            /* session sequence number */
+    tOBX_SESS_OP        sess_op;        /* the session op code */
+    tOBX_SESS_ST        sess_st;        /* the session state */
+    BD_ADDR             peer_addr;      /* The peer Bluetooth Address. */
+    UINT8               *p_sess_info;   /* The session ID and the local nonce for a reliable session, a reference to the location in OBEX control block or NULL */
+    UINT32              timeout;        /* The number of seconds remaining in suspend. 0xffff if infinite. */
+    UINT32              obj_offset;     /* The object offset for resume session. */
+    UINT8               nssn;           /* tne next session sequence number the server expects */
+} tOBX_SESS_EVT;
+
+#define OBX_ACT_COPY        0x00    /* Copy object */
+#define OBX_ACT_MOVE        0x01    /* Move/rename object */
+#define OBX_ACT_PERMISSION  0x02    /* Set object permission */
+typedef UINT8 tOBX_ACTION;
+
+typedef struct
+{
+    UINT8               ssn;        /* session sequence number */
+    tOBX_ACTION         action;     /* The action opcode. */
+} tOBX_ACT_EVT;
+
+typedef struct
+{
+    UINT8               ssn;        /* session sequence number */
+    tOBX_SETPATH_FLAG   flag;       /* The set path flags. */
+} tOBX_SETPATH_EVT;
+
+/* permission flags */
+#define OBX_PERMISSION_READ         0x01
+#define OBX_PERMISSION_WRITE        0x02
+#define OBX_PERMISSION_DELETE       0x04
+#define OBX_PERMISSION_MODIFY       0x80
+
+typedef union
+{
+    UINT8               ssn;        /* session sequence number */
+    tOBX_CONN_EVT       conn;       /* This element is associated with OBX_CONNECT_REQ_EVT and OBX_CONNECT_RSP_EVT. */
+    tOBX_SESS_EVT       sess;       /* This element is associated with OBX_SESSION_RSP_EVT and OBX_SESSION_REQ_EVT. */
+    tOBX_PUT_EVT        put;        /* This element is associated with OBX_PUT_REQ_EVT. */
+    tOBX_SETPATH_EVT    sp;         /* This element is associated with OBX_SETPATH_REQ_EVT. */
+    tOBX_ACT_EVT        action;     /* This element is associated with OBX_ACTION_REQ_EVT */
+    tOBX_GET_EVT        get;        /* This element is associated with OBX_GET_REQ_EVT. TRUE, if this is the final packet that contains the OBEX headers for this GET request. */
+} tOBX_EVT_PARAM;
+
+
+enum
+{
+    OBX_NULL_EVT,
+    /* server events */
+    OBX_CONNECT_REQ_EVT,    /* param = packet MTU */
+    OBX_SESSION_REQ_EVT,    /* A Crease Session or Resume Session request is received by the server. Call OBX_SessionRsp(). */
+    OBX_DISCONNECT_REQ_EVT,
+    OBX_PUT_REQ_EVT,        /* could have param indicate delete or create? */
+    OBX_GET_REQ_EVT,
+    OBX_SETPATH_REQ_EVT,    /* param = flags */
+    OBX_ABORT_REQ_EVT,
+    OBX_ACTION_REQ_EVT,     /* An Action request is received by the server. Call OBX_ActionRsp(). */
+
+    /* client events */
+    OBX_CONNECT_RSP_EVT,    /* param = packet MTU */
+    OBX_SESSION_RSP_EVT,    /* A response for Create Session or Resume Session is received by the client. The client needs to remember the session id. The session id is to be used in calling OBX_ResumeSession, if the current session is terminated prematurely. */
+    OBX_DISCONNECT_RSP_EVT,
+    OBX_PUT_RSP_EVT,
+    OBX_GET_RSP_EVT,
+    OBX_SETPATH_RSP_EVT,
+    OBX_ABORT_RSP_EVT,
+    OBX_ACTION_RSP_EVT,     /* An Action response is received by the client. */
+
+    /* common events */
+    OBX_SESSION_INFO_EVT,   /* the session information event to resume the session. */
+    OBX_CLOSE_IND_EVT,      /* when transport goes down; p_pkt = NULL; no response needed */
+    OBX_TIMEOUT_EVT,        /* param = tOBX_EVENT */
+    OBX_PASSWORD_EVT
+};
+typedef UINT8 tOBX_EVENT;
+
+/* this is used by the protocol display function only*/
+enum
+{
+    OBX_NULL_DISP,
+    /* server events */
+    OBX_CONNECT_REQ_DISP,
+    OBX_SESSION_REQ_DISP,
+    OBX_DISCONNECT_REQ_DISP,
+    OBX_PUT_REQ_DISP,
+    OBX_GET_REQ_DISP,
+    OBX_SETPATH_REQ_DISP,
+    OBX_ABORT_REQ_DISP,
+    OBX_ACTION_REQ_DISP,
+    /* client events */
+    OBX_CONNECT_RSP_DISP,
+    OBX_SESSION_RSP_DISP,
+    OBX_DISCONNECT_RSP_DISP,
+    OBX_PUT_RSP_DISP,
+    OBX_GET_RSP_DISP,
+    OBX_SETPATH_RSP_DISP,
+    OBX_ABORT_RSP_DISP,
+    OBX_ACTION_RSP_DISP,
+    /* common events */
+    OBX_CLOSE_IND_DISP,
+    OBX_TIMEOUT_DISP,
+    OBX_PASSWORD_DISP
+};
+#define OBX_DISP_IS_RECV    0x80
+#define OBX_DISP_TYPE_MASK  0x7F
+
+#define OBX_MAX_EVT         OBX_PASSWORD_EVT
+#define OBX_MAX_OFFSET_IND  OBX_ABORT_RSP_EVT /* This is used to access obx_hdr_start_offset */
+
+/*
+** Define Miscellaneous Constants
+*/
+#define OBX_VERSION                     0x10    /* Version 1.0 */
+#define OBX_CONN_FLAGS                  0       /* Connect flags per IrOBEX spec */
+#define OBX_SETPATH_CONST               0       /* SetPath Request constants per IrOBEX spec */
+#define OBX_INVALID_CONN_ID             0xFFFFFFFF  /* invalid connection ID per IrOBEX spec */
+#define OBX_INFINITE_TIMEOUT            0xFFFFFFFF
+
+/* Header Identifier Data Type Constants */
+#define OBX_HI_TYPE_MASK                0xC0    /* This mask get the encoding (data type) of the header ID. */
+#define OBX_HI_ID_MASK                  0x3F    /* This mask gets the meaning of the header ID. */
+#define OBX_HI_TYPE_UNIC                0x00    /* Null terminated Unicode text */
+#define OBX_HI_TYPE_ARRAY               0x40    /* Unstructured octet array (byte sequence) */
+#define OBX_HI_TYPE_BYTE                0x80    /* 8-bit integer */
+#define OBX_HI_TYPE_INT                 0xC0    /* 32-bit integer */
+
+/*
+** Define OBEX Header Identifiers
+*/
+#define OBX_HI_NULL                     0
+#define OBX_HI_COUNT                    0xC0
+#define OBX_HI_NAME                     0x01
+#define OBX_HI_TYPE                     0x42
+#define OBX_HI_LENGTH                   0xC3
+#define OBX_HI_TIME                     0x44
+#define OBX_HI_DESCRIPTION              0x05
+#define OBX_HI_TARGET                   0x46
+#define OBX_HI_HTTP                     0x47
+#define OBX_HI_BODY                     0x48
+#define OBX_HI_BODY_END                 0x49
+#define OBX_HI_WHO                      0x4A
+#define OBX_HI_CONN_ID                  0xCB
+#define OBX_HI_APP_PARMS                0x4C
+#define OBX_HI_CHALLENGE                0x4D
+#define OBX_HI_AUTH_RSP                 0x4E
+#define OBX_HI_CREATOR_ID               0xCF
+#define OBX_HI_WAN_UUID                 0x50
+#define OBX_HI_OBJ_CLASS                0x51
+#define OBX_HI_SESSION_PARAM            0x52
+#define OBX_HI_SESSION_SN               0x93
+#define OBX_HI_ACTION_ID                0x94
+#define OBX_HI_DEST_NAME                0x15
+#define OBX_HI_PERMISSION               0xD6
+#define OBX_HI_SRM                      0x97
+#define OBX_HI_SRM_PARAM                0x98
+#define OBX_HI_LO_USER                  0x30
+#define OBX_HI_HI_USER                  0x3F
+
+/* Obex Header Values for the SRM header */
+#define OBX_HV_SRM_DISABLE  0x00    /* SRM header value - disable */
+#define OBX_HV_SRM_ENABLE   0x01    /* SRM header value - enable */
+#define OBX_HV_SRM_IND      0x02    /* SRM header value - indicate support */
+
+/* Obex Header Values for the SRM Parameter header */
+#define OBX_HV_SRM_PARAM_MORE   0x00    /* SRM Param header value - request additional packet */
+#define OBX_HV_SRM_PARAM_WAIT   0x01    /* SRM Param header value - wait for next req/rsp */
+#define OBX_HV_SRM_PARAM_COMBO  0x02    /* SRM Param header value - next and wait */
+
+#define OBX_TAG_SESS_PARAM_ADDR         0x00
+#define OBX_TAG_SESS_PARAM_NONCE        0x01
+#define OBX_TAG_SESS_PARAM_SESS_ID      0x02
+#define OBX_TAG_SESS_PARAM_NSEQNUM      0x03
+#define OBX_TAG_SESS_PARAM_TOUT         0x04
+#define OBX_TAG_SESS_PARAM_SESS_OP      0x05
+#define OBX_TAG_SESS_PARAM_OBJ_OFF      0x06
+#define OBX_MAX_SESS_PARAM_TRIP         7   /* max number of TLV for session operations */
+
+#define OBX_LEN_SESS_PARAM_SESS_OP      1
+#define OBX_LEN_SESS_PARAM_OBJ_OFF      4   /* this value varies, so it needs to be verified on the receiving side */
+
+/*
+** Define OBEX Request Codes
+*/
+#define OBX_REQ_CONNECT                         0x00    /* need to set final bit */
+#define OBX_REQ_DISCONNECT                      0x01    /* need to set final bit */
+#define OBX_REQ_PUT                             0x02
+#define OBX_REQ_GET                             0x03
+#define OBX_REQ_SETPATH                         0x05    /* need to set final bit */
+#define OBX_REQ_ACTION                          0x06
+#define OBX_REQ_SESSION                         0x07    /* need to set final bit */
+#define OBX_REQ_ABORT                           0x7F    /* need to set final bit */
+#define OBX_FINAL                               0x80
+
+/* OBEX response code as defined in IrOBEX spec. version 1.2 */
+#define OBX_RSP_DEFAULT                         0x00
+#define OBX_RSP_FAILED                          0x08    /* OBEX failed - not from spec */
+#define OBX_RSP_CONTINUE                        0x10    /* Continue */
+#define OBX_RSP_OK                              0x20    /* OK, Success */
+#define OBX_RSP_CREATED                         0x21    /* Created */
+#define OBX_RSP_ACCEPTED                        0x22    /* Accepted */
+#define OBX_RSP_NON_AUTH_INFO                   0x23    /* Non-Authoritative Information */
+#define OBX_RSP_NO_CONTENT                      0x24    /* No Content */
+#define OBX_RSP_RESET_CONTENT                   0x25    /* Reset Content */
+#define OBX_RSP_PART_CONTENT                    0x26    /* Partial Content */
+#define OBX_RSP_MULTI_CHOICES                   0x30    /* Multiple Choices */
+#define OBX_RSP_MVD_PERM                        0x31    /* Moved Permanently */
+#define OBX_RSP_MVD_TEMP                        0x32    /* Moved temporarily */
+#define OBX_RSP_SEE_OTHER                       0x33    /* See Other */
+#define OBX_RSP_NOT_MODIFIED                    0x34    /* Not modified */
+#define OBX_RSP_USE_PROXY                       0x35    /* Use Proxy */
+#define OBX_RSP_BAD_REQUEST                     0x40    /* Bad Request - server couldn't understand request */
+#define OBX_RSP_UNAUTHORIZED                    0x41    /* Unauthorized */
+#define OBX_RSP_PAYMENT_REQD                    0x42    /* Payment required */
+#define OBX_RSP_FORBIDDEN                       0x43    /* Forbidden - operation is understood but refused */
+#define OBX_RSP_NOT_FOUND                       0x44    /* Not Found */
+#define OBX_RSP_NOT_ALLOWED                     0x45    /* Method not allowed */
+#define OBX_RSP_NOT_ACCEPTABLE                  0x46    /* Not Acceptable */
+#define OBX_RSP_PROXY_AUTH_REQD                 0x47    /* Proxy Authentication required */
+#define OBX_RSP_REQUEST_TIMEOUT                 0x48    /* Request Time Out */
+#define OBX_RSP_CONFLICT                        0x49    /* Conflict */
+#define OBX_RSP_GONE                            0x4A    /* Gone */
+#define OBX_RSP_LENGTH_REQD                     0x4B    /* Length Required */
+#define OBX_RSP_PRECONDTN_FAILED                0x4C    /* Precondition failed */
+#define OBX_RSP_REQ_ENT_2_LARGE                 0x4D    /* Requested entity too large */
+#define OBX_RSP_REQ_URL_2_LARGE                 0x4E    /* Request URL too large */
+#define OBX_RSP_UNSUPTD_TYPE                    0x4F    /* Unsupported media type */
+#define OBX_RSP_INTRNL_SRVR_ERR                 0x50    /* Internal Server Error */
+#define OBX_RSP_NOT_IMPLEMENTED                 0x51    /* Not Implemented */
+#define OBX_RSP_BAD_GATEWAY                     0x52    /* Bad Gateway */
+#define OBX_RSP_SERVICE_UNAVL                   0x53    /* Service Unavailable */
+#define OBX_RSP_GATEWAY_TIMEOUT                 0x54    /* Gateway Timeout */
+#define OBX_RSP_HTTP_VER_NOT_SUPTD              0x55    /* HTTP version not supported */
+#define OBX_RSP_DATABASE_FULL                   0x60    /* Database Full */
+#define OBX_RSP_DATABASE_LOCKED                 0x61    /* Database Locked */
+
+#define OBX_MAX_OK_RSP      OBX_RSP_PART_CONTENT
+
+typedef UINT8   tOBX_RSP_CODE;
+
+/* tags for authentication triplet */
+#define OBX_NONCE_CHLNG_TAG         0
+#define OBX_OPTIONS_CHLNG_TAG       1
+#define OBX_REALM_CHLNG_TAG         2
+
+#define OBX_DIGEST_RSP_TAG          0
+#define OBX_USERID_RSP_TAG          1
+#define OBX_NONCE_RSP_TAG           2
+
+typedef struct
+{
+    UINT8   tag;
+    UINT8   len;
+    UINT8   *p_array;
+} tOBX_TRIPLET;
+
+/* Server Callback type: */
+typedef void (tOBX_SR_CBACK) (tOBX_HANDLE shandle, tOBX_EVENT event, tOBX_EVT_PARAM param, BT_HDR *p_pkt);
+/* Client Callback type: */
+typedef void (tOBX_CL_CBACK) (tOBX_HANDLE handle, tOBX_EVENT event, UINT8 rsp_code, tOBX_EVT_PARAM param, BT_HDR *p_pkt);
+
+
+typedef struct
+{
+    UINT16  len;                        /* Length of target header. */
+    UINT8   target[OBX_MAX_TARGET_LEN]; /* The byte sequence that describes the target header. */
+} tOBX_TARGET;
+
+
+typedef struct
+{
+    tOBX_TARGET     *p_target;
+    tOBX_SR_CBACK   *p_cback;
+    UINT16          mtu;
+    UINT8           scn;            /* The RFCOMM SCN number that this server listens for incoming requests. 0, if do not wish to listen to connection from RFCOMM. */
+    BOOLEAN         authenticate;
+    UINT8           auth_option;
+    UINT8           realm_charset;
+    UINT8           *p_realm;
+    UINT8           realm_len;
+    UINT8           max_sessions;
+    BOOLEAN         get_nonf;       /* report GET non-final request event. If FALSE, GET response is sent automatically */
+    UINT16          psm;            /* The L2CAP PSM number that this server listens for incoming requests. 0, if do not wish to listen to connection from L2CAP. */
+    UINT32          nonce;          /* This is converted to UINT8[16] internally before adding to the OBEX header. This value is copied to the server control block and is increased after each use. 0, if only legacy OBEX (unreliable) session is desired. */
+    BOOLEAN         srm;            /* TRUE, to support single response mode. */
+    UINT8           max_suspend;    /* Max number of suspended session. must be less than OBX_MAX_SUSPEND_SESSIONS. ignored, if nonce is 0 */
+} tOBX_StartParams;
+
+
+
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function     OBX_Init
+**
+** Description  This function is called to initialize the control block for this
+**              layer. It must be called before accessing any other of its API
+**              functions.  It is typically called once during the start up of
+**              the stack.
+**
+** Returns      void.
+**
+*******************************************************************************/
+OBX_API extern void OBX_Init(void);
+
+/*******************************************************************************
+**
+** Function         OBX_SetTraceLevel
+**
+** Description      This function sets the debug trace level for OBX.
+**                  If 0xff is passed, the current trace level is returned.
+**
+**                  Input Parameters:
+**                      level:  The level to set the OBX tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+*******************************************************************************/
+OBX_API extern UINT8 OBX_SetTraceLevel (UINT8 level);
+
+/*******************************************************************************
+** Function     OBX_HandleToMtu
+**
+** Description  Given an OBEX handle, return the associated peer MTU.
+**
+** Returns      MTU.
+**
+*******************************************************************************/
+OBX_API extern UINT16 OBX_HandleToMtu(tOBX_HANDLE handle);
+
+/* Server API's: */
+/*******************************************************************************
+**
+** Function     OBX_StartServer
+**
+** Description  This function is to register a server entity to OBEX.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not have resources.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_StartServer(tOBX_StartParams *p_params, tOBX_HANDLE *p_handle);
+
+/*******************************************************************************
+**
+** Function     OBX_StopServer
+**
+** Description  This function is to stop this OBEX server from receiving any
+**              more incoming requests.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_StopServer(tOBX_HANDLE handle);
+
+/*******************************************************************************
+**
+** Function     OBX_AddSuspendedSession
+**
+** Description  This function is to add the session information for a previously
+**				suspended reliable session to the server control block
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_AddSuspendedSession(tOBX_HANDLE shandle, BD_ADDR peer_addr, UINT8 *p_sess_info,
+                                                   UINT32 timeout, UINT8 ssn, UINT32 offset);
+
+/*******************************************************************************
+**
+** Function     OBX_ConnectRsp
+**
+** Description  This function is called to send the response to a Connect
+**              Request from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_ConnectRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_SessionRsp
+**
+** Description  This function is called to respond to a request to create a reliable session.
+**
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_SessionRsp(tOBX_HANDLE shandle, UINT8 rsp_code,
+                                          UINT8 ssn, UINT32 offset, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_SetPathRsp
+**
+** Description  This function is called to send the response to a Set Path
+**              Request from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_SetPathRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_PutRsp
+**
+** Description  This function is called to send the response to a Put
+**              Request from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_PutRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_GetRsp
+**
+** Description  This function is called to send the response to a Get
+**              Request from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_GetRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_AbortRsp
+**
+** Description  This function is called to send the response to an Abort
+**              Request from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_AbortRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_ActionRsp
+**
+** Description  This function is called to respond to an Action command Request
+**              from an OBEX client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_ActionRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_DisconnectRsp
+**
+** Description  This function is called to send the response to a Disconnect
+**              Request from an OBEX client.
+**              This function can also be used to force close the transport
+**              to a connected client.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_DisconnectRsp(tOBX_HANDLE shandle, UINT8 rsp_code, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_Password
+**
+** Description  This function is called to respond to an OBX_PASSWORD_EVT event.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_Password(tOBX_HANDLE shandle, UINT8 *p_password, UINT8 password_len,
+                                        UINT8 *p_userid, UINT8 userid_len);
+
+/*******************************************************************************
+**
+** Function     OBX_GetPeerAddr
+**
+** Description  This function is called to learn the Bluetooth address of the
+**              connected device.
+**
+** Returns      L2CAP channel ID.
+**
+*******************************************************************************/
+OBX_API extern UINT16 OBX_GetPeerAddr(tOBX_HANDLE shandle, BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function     OBX_GetPortHandle
+**
+** Description  This function is called to get the RFCOMM port handle for the obex connection.
+**
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if no existing connection.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_GetPortHandle(tOBX_HANDLE handle, UINT16 *port_handle);
+
+/* Client API's: */
+/*******************************************************************************
+**
+** Function     OBX_ConnectReq
+**
+** Description  This function registers a client entity to OBEX and sends a
+**              CONNECT request to the server specified by the API parameters.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_ConnectReq(BD_ADDR bd_addr, UINT8 scn, UINT16 mtu,
+                                          tOBX_CL_CBACK *p_cback, tOBX_HANDLE *p_handle, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_AllocSession
+**
+** Description  This function registers a client entity to OBEX.
+**              If p_session_id is not NULL, it tries to find an suspended session
+**                  with matching session_id.
+**              If scn is not 0, it allocates a control block for this new session.
+**              Otherwise, it allocates a control block for the given PSM.
+**              The associated virtual PSM assigned by L2CAP is returned in p_psm
+**              The allocated OBEX handle is returned in p_handle.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_AllocSession (UINT8 *p_session_info, UINT8 scn, UINT16 *p_psm,
+                              tOBX_CL_CBACK *p_cback, tOBX_HANDLE *p_handle);
+
+/*******************************************************************************
+**
+** Function     OBX_CreateSession
+**
+** Description  This function registers a client entity to OBEX.
+**              It may send a CreateSession request and wait for CreateSession response.
+**              It sends a CONNECT request to the server specified by the API parameters.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_CreateSession (BD_ADDR bd_addr, UINT16 mtu, BOOLEAN srm, UINT32 nonce,
+                                              tOBX_HANDLE handle, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_ResumeSession
+**
+** Description  This function registers a client entity to OBEX and resumes
+**              a previously interrupted reliable session.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_ResumeSession (BD_ADDR bd_addr, UINT8 ssn, UINT32 offset, tOBX_HANDLE handle);
+
+/*******************************************************************************
+**
+** Function     OBX_SessionReq
+**
+** Description  This function is used to Suspend, Resume, or Close a session.
+**              For Resume: this function registers a client entity to OBEX and resumes
+**              a previously interrupted reliable session.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_SessionReq (tOBX_HANDLE handle, tOBX_SESS_OP opcode, UINT32 timeout);
+
+/*******************************************************************************
+**
+** Function     OBX_SetPathReq
+**
+** Description  This function sends a Set Path request to the connected server.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_SetPathReq(tOBX_HANDLE handle, UINT8 flags, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_PutReq
+**
+** Description  This function sends a Put request to the connected server.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_PutReq(tOBX_HANDLE handle, BOOLEAN final, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_GetReq
+**
+** Description  This function sends a Get request to the connected server.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_GetReq(tOBX_HANDLE handle, BOOLEAN final, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_AbortReq
+**
+** Description  This function sends an Abort request to the connected server.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_AbortReq(tOBX_HANDLE handle, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_DisconnectReq
+**
+** Description  This function sends a Disconnect request to the connected server.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_DisconnectReq(tOBX_HANDLE handle, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_ActionReq
+**
+** Description  This function sends a Action request to the connected server.
+**              The Name Header and DestName Header must be in p_pkt for
+**                  the Copy and Move Object action.
+**              The Name header and Permission Header must be in p_pkt for
+**                  the Set Object Permission action.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_BAD_HANDLE, if the handle is not valid.
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_ActionReq(tOBX_HANDLE handle, tOBX_ACTION action_id, BT_HDR *p_pkt);
+
+/*******************************************************************************
+**
+** Function     OBX_AuthResponse
+**
+** Description  This function is called to respond to an OBX_PASSWORD_EVT event.
+**
+** Returns      OBX_SUCCESS, if successful.
+**              OBX_NO_RESOURCES, if OBX does not resources
+**
+*******************************************************************************/
+OBX_API extern tOBX_STATUS OBX_AuthResponse(tOBX_HANDLE handle,
+                                            UINT8 *p_password, UINT8 password_len,
+                                            UINT8 *p_userid, UINT8 userid_len,
+                                            BOOLEAN authenticate);
+
+
+/*******************************************************************************
+**
+** Function     OBX_HdrInit
+**
+** Description  This function is called to initialize an OBEX packet. This
+**              function takes a GKI buffer and sets the offset in BT_HDR as
+**              OBEX_HDR_OFFSET, the len as 0. The layer_specific is set to the
+**              length still available. This function compares the given
+**              (pkt_size - sizeof(BT_HDR)) with the peer MTU to get the lesser
+**              of the two and set the layer_specific to
+**              (lesser_size - OBEX_HDR_OFFSET).
+**              If composing a header for the CONNECT request (there is no
+**              client handle yet), use OBX_HANDLE_NULL as the handle.
+**
+** Returns      BT_HDR *.
+**
+*******************************************************************************/
+OBX_API extern BT_HDR * OBX_HdrInit(tOBX_HANDLE handle, UINT16 pkt_size);
+
+/*******************************************************************************
+**
+** Function     OBX_AddNameHdr
+**
+** Description  This function is called to add an OBEX Name header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddNameHdr(BT_HDR *p_pkt, UINT16 *p_name, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_CharToWchar
+**
+** Description  This function is called to convert ASCII to Unicode (UINT16).
+**
+** Returns      the length.
+**
+*******************************************************************************/
+OBX_API extern UINT16 OBX_CharToWchar (UINT16 *w_str, char* a_str, UINT16 w_size);
+
+/*******************************************************************************
+**
+** Function     OBX_AddAsciiNameHdr
+**
+** Description  This function is called to add an OBEX Name header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddAsciiNameHdr(BT_HDR *p_pkt, char *p_name);
+
+/*******************************************************************************
+**
+** Function     OBX_AddTypeHdr
+**
+** Description  This function is called to add an OBEX Type header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddTypeHdr(BT_HDR *p_pkt, char *p_type);
+
+/*******************************************************************************
+**
+** Function     OBX_AddLengthHdr
+**
+** Description  This function is called to add an OBEX Length header to an OBEX
+**              packet. The Length header describes the total length in bytes of
+**              the object.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddLengthHdr(BT_HDR *p_pkt, UINT32 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddTimeHdr
+**
+** Description  This function is called to add an OBEX Time header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddTimeHdr(BT_HDR *p_pkt, char *p_time);
+
+/*******************************************************************************
+**
+** Function     OBX_AddDescrHdr
+**
+** Description  This function is called to add an OBEX Description header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddDescrHdr(BT_HDR *p_pkt, UINT16 *p_descr, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddAsciiDescrHdr
+**
+** Description  This function is called to add an OBEX Description header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddAsciiDescrHdr(BT_HDR *p_pkt, char *p_descr);
+
+/*******************************************************************************
+**
+** Function     OBX_AddTargetHdr
+**
+** Description  This function is called to add an OBEX Target header to an OBEX
+**              packet. This header is most commonly used in Connect packets.
+**
+**              NOTE: The target header must be the first header in an OBEX message.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddTargetHdr(BT_HDR *p_pkt, UINT8 *p_target, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddHttpHdr
+**
+** Description  This function is called to add an OBEX HTTP header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddHttpHdr(BT_HDR *p_pkt, UINT8 *p_http, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddBodyHdr
+**
+** Description  This function is called to add an OBEX body header
+**              to an OBEX packet.
+**
+**              NOTE: The body header must be the last header in an OBEX message.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddBodyHdr(BT_HDR *p_pkt, UINT8 *p_body, UINT16 len, BOOLEAN end);
+
+/* Alternate Body header functions: for non-blocking scenario */
+/*******************************************************************************
+**
+** Function     OBX_AddBodyStart
+**
+** Description  This function is called to get the address to the beginning of
+**              the byte sequence for an OBEX body header in an OBEX packet.
+**
+** Returns      The address to add body content.
+**
+*******************************************************************************/
+OBX_API extern UINT8 *OBX_AddBodyStart(BT_HDR *p_pkt, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddBodyEnd
+**
+** Description  This function is called to add the HI and the length of HV of an
+**              OBEX body header to an OBEX packet. If end is TRUE, HI is
+**              OBX_HI_BODY_END. If FALSE, HI is OBX_HI_BODY. It is assumed that
+**              the actual value of the body has been copied into the OBEX packet.
+**
+** Returns      void
+**
+*******************************************************************************/
+OBX_API extern void OBX_AddBodyEnd(BT_HDR *p_pkt, UINT8 *p, UINT16 len, BOOLEAN end);
+
+/*******************************************************************************
+**
+** Function     OBX_AddWhoHdr
+**
+** Description  This function is called to add an OBEX Who header to an OBEX
+**              packet.
+**
+** Note:        Who header is typically used in an OBEX CONNECT response packet
+**              to indicate the UUID of the service that has accepted the
+**              directed connection. If the server calls OBX_StartServer() with
+**              specified target header, this OBEX implementation automatically
+**              adds this WHO header to the CONNECT response packet. If
+**              OBX_StartServer() is called with target header length as 0, the
+**              OBEX API user is responsible to add the WHO header.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddWhoHdr(BT_HDR *p_pkt, UINT8 *p_who, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddAppParamHdr
+**
+** Description  This function is called to add an OBEX Application Parameter
+**              header to an OBEX packet. This header is used by the application
+**              layer above OBEX to convey application specific information.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddAppParamHdr(BT_HDR *p_pkt, tOBX_TRIPLET *p_triplet, UINT8 num);
+
+/*******************************************************************************
+**
+** Function     OBX_AddDestNameHdr
+**
+** Description  This function is called to add an OBEX DestName header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddDestNameHdr(BT_HDR *p_pkt, UINT16 *p_dest, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddAsciiDestNameHdr
+**
+** Description  This function is called to add an OBEX DestName header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddAsciiDestNameHdr(BT_HDR *p_pkt, char *p_descr);
+
+/*******************************************************************************
+**
+** Function     OBX_AddPermissionHdr
+**
+** Description  This function is called to add an OBEX Permission header to an OBEX
+**              packet.
+**              bit 0 is set for read permission
+**              bit 1 is set for write permission
+**              bit 2 is set for delete permission
+**              bit 7 is set for modify permission
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddPermissionHdr(BT_HDR *p_pkt, UINT8 user, UINT8 group, UINT8 other);
+
+/*******************************************************************************
+**
+** Function     OBX_Add1ByteHdr
+**
+** Description  This function is called to add a header with type as UINT8
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_Add1ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT8 data);
+
+/*******************************************************************************
+**
+** Function     OBX_Add4ByteHdr
+**
+** Description  This function is called to add a header with type as UINT32
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_Add4ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT32 data);
+
+/*******************************************************************************
+**
+** Function     OBX_AddByteStrStart
+**
+** Description  This function is called to get the address to the beginning of
+**              the byte sequence for an OBEX header in an OBEX packet.
+**
+** Returns      The address to add the byte sequence.
+**
+*******************************************************************************/
+OBX_API extern UINT8 *OBX_AddByteStrStart(BT_HDR *p_pkt, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddByteStrHdr
+**
+** Description  This function is called to add a header with type as byte sequence
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddByteStrHdr(BT_HDR *p_pkt, UINT8 id, UINT8 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddUnicodeHdr
+**
+** Description  This function is called to add a header with type as Unicode string
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddUnicodeHdr(BT_HDR *p_pkt, UINT8 id, UINT16 *p_data, UINT16 len);
+
+/*******************************************************************************
+**
+** Function     OBX_AddTriplet
+**
+** Description  This function is called to add a header with type as byte sequence
+**              to an OBEX packet.
+**
+** Note:        The byte sequence uses a Tag-Length-Value encoding scheme
+**              These headers include: Application Parameters header
+**                                     Authenticate Challenge header
+**                                     Authenticate Response header
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddTriplet(BT_HDR *p_pkt, UINT8 id, tOBX_TRIPLET *p_triplet, UINT8 num);
+
+/*******************************************************************************
+**
+** Function     OBX_CheckHdr
+**
+** Description  This function is called to check if the given OBEX packet
+**              contains the specified header.
+**
+** Returns      NULL, if the header is not in the OBEX packet.
+**              The pointer to the specified header beginning from HI.
+**
+*******************************************************************************/
+OBX_API extern UINT8 * OBX_CheckHdr(BT_HDR *p_pkt, UINT8 id);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadNumHdrs
+**
+** Description  This function is called to check the number of headers in the
+**              given OBEX packet
+**
+** Returns      number of headers.
+**
+*******************************************************************************/
+OBX_API extern UINT8 OBX_ReadNumHdrs(BT_HDR *p_pkt, UINT8 *p_num_body);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadHdrLen
+**
+** Description  This function is called to check the length of the specified
+**              header in the given OBEX packet.
+**
+** Returns      OBX_INVALID_HDR_LEN, if the header is not in the OBEX packet.
+**              Otherwise the actual length of the header.
+**
+*******************************************************************************/
+OBX_API extern UINT16 OBX_ReadHdrLen(BT_HDR *p_pkt, UINT8 id);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadNameHdr
+**
+** Description  This function is called to get the Name Header in the given
+**              OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadNameHdr(BT_HDR *p_pkt, UINT16 *p_name, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_WcharToChar
+**
+** Description  This function is called to convert Unicode (UINT16) to ASCII.
+**
+** Returns      void.
+**
+*******************************************************************************/
+OBX_API extern void OBX_WcharToChar (char *a_str, UINT16* w_str, UINT16 a_size) ;
+
+/*******************************************************************************
+**
+** Function     OBX_ReadAsciiNameHdr
+**
+** Description  This function is called to get the Name Header in the given
+**              OBEX packet. If Name header exists in the given OBEX packet,
+**              it is converted to ASCII format and copied into p_name.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadAsciiNameHdr(BT_HDR *p_pkt, char *p_name, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadTypeHdr
+**
+** Description  This function is called to get the Type Header in the given
+**              OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadTypeHdr(BT_HDR *p_pkt, UINT8 **p_type, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadLengthHdr
+**
+** Description  This function is called to get the Length Header in the given
+**              OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadLengthHdr(BT_HDR *p_pkt, UINT32 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadTimeHdr
+**
+** Description  This function is called to get the Time Header in the given
+**              OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadTimeHdr(BT_HDR *p_pkt, UINT8 **p_time, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadDescrHdr
+**
+** Description  This function is called to get the Description Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadDescrHdr(BT_HDR *p_pkt, UINT16 *p_descr, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadDestNameHdr
+**
+** Description  This function is called to get the DestName Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadDestNameHdr(BT_HDR *p_pkt, UINT16 *p_dest, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadAsciiDescrHdr
+**
+** Description  This function is called to get the Description Header in the
+**              given OBEX packet. If Description header exists in the given
+**              OBEX packet, it is converted to ASCII format and copied into
+**              p_descr.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadAsciiDescrHdr(BT_HDR *p_pkt, char *p_descr, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadAsciiDestNameHdr
+**
+** Description  This function is called to get the DestName Header in the
+**              given OBEX packet. If DestName header exists in the given
+**              OBEX packet, it is converted to ASCII format and copied into
+**              p_descr.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadAsciiDestNameHdr(BT_HDR *p_pkt, char *p_dest, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadTargetHdr
+**
+** Description  This function is called to get the Target Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadTargetHdr(BT_HDR *p_pkt, UINT8 **p_target, UINT16 *p_len, UINT8 next);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadHttpHdr
+**
+** Description  This function is called to get the HTTP Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadHttpHdr(BT_HDR *p_pkt, UINT8 **p_http, UINT16 *p_len, UINT8 next);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadBodyHdr
+**
+** Description  This function is called to get the Body Header in the
+**              given OBEX packet.
+**
+** Returns      1, if a single header is in the OBEX packet.
+**              2, if a end of body header is in the OBEX packet.
+**              0, (FALSE) otherwise.
+**
+*******************************************************************************/
+OBX_API extern UINT8 OBX_ReadBodyHdr(BT_HDR *p_pkt, UINT8 **p_body, UINT16 *p_len, BOOLEAN *p_end);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadWhoHdr
+**
+** Description  This function is called to get the Who Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadWhoHdr(BT_HDR *p_pkt, UINT8 **p_who, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadAppParamHdr
+**
+** Description  This function is called to get the Application Parameter Header
+**              in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadAppParamHdr(BT_HDR *p_pkt, UINT8 *p_tag, UINT8 **p_app_param, UINT8 *p_len, UINT8 next);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadPermissionHdr
+**
+** Description  This function is called to get the Application Parameter Header
+**              in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadPermissionHdr(BT_HDR *p_pkt, UINT8 *p_user, UINT8 *p_group, UINT8 *p_other);
+
+/*******************************************************************************
+**
+** Function     OBX_Read1ByteHdr
+**
+** Description  This function is called to get the UINT8 HV of the given HI
+**              in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_Read1ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT8 *p_data);
+
+/*******************************************************************************
+**
+** Function     OBX_Read4ByteHdr
+**
+** Description  This function is called to get the UINT32 HV of the given HI
+**              in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_Read4ByteHdr(BT_HDR *p_pkt, UINT8 id, UINT32 *p_data);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadByteStrHdr
+**
+** Description  This function is called to get the byte sequence HV of the given
+**              HI in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadByteStrHdr(BT_HDR *p_pkt, UINT8 id, UINT8 **p_data, UINT16 *p_len, UINT8 next);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadUnicodeHdr
+**
+** Description  This function is called to get the Unicode HV of the given
+**              HI in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadUnicodeHdr(BT_HDR *p_pkt, UINT8 id, UINT16 *p_data, UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadTriplet
+**
+** Description  This function is called to get the Triplet HV of the given
+**              HI in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadTriplet(BT_HDR *p_pkt, UINT8 id, tOBX_TRIPLET *p_triplet, UINT8 *p_num);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadActionIdHdr
+**
+** Description  This function is called to get the HV of the Action ID header
+**              in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadActionIdHdr(BT_HDR *p_pkt, UINT8 *p_data);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadChallenge
+**
+** Description  This function is called to read the Realm and options of the
+**              Authentication Challenge Header in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadChallenge(BT_HDR *p_pkt, tOBX_CHARSET *p_charset,
+                                         UINT8 **p_realm, UINT8 *p_len,
+                                         tOBX_AUTH_OPT *p_option);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadAuthParams
+**
+** Description  This function is called to read the User ID of the
+**              Authentication Response Header in the given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadAuthParams(BT_HDR *p_pkt, UINT8 **p_userid, UINT8 *p_len,
+                                          BOOLEAN *is_challenged, tOBX_AUTH_OPT *p_option);
+
+
+/*******************************************************************************
+**
+** Function         utfc_16_to_8
+**
+** Description      Convert a UTF-16 array to a null-terminated UTF-8 string.
+**                  Illegal characters are skipped.
+**
+** Returns          Length of UTF-8 string in bytes.
+**
+*******************************************************************************/
+OBX_API extern UINT16 utfc_16_to_8(UINT8 *p_utf8, UINT16 utf8_len, UINT16 *p_utf16, UINT16 utf16_len);
+
+/*******************************************************************************
+**
+** Function         utfc_8_to_16
+**
+** Description      Convert a null-terminated UTF-8 string to a UTF-16 array.
+**                  Illegal characters are skipped.
+**
+** Returns          Length of UTF-16 array.
+**
+*******************************************************************************/
+OBX_API extern UINT16 utfc_8_to_16(UINT16 *p_utf16, UINT16 utf16_len, UINT8 *p_utf8);
+
+/*******************************************************************************
+**
+** Function     OBX_AddUtf8NameHdr
+**
+** Description  This function is called to add an OBEX Name header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddUtf8NameHdr(BT_HDR *p_pkt, UINT8 *p_name);
+
+/*******************************************************************************
+**
+** Function     OBX_AddUtf8DescrHdr
+**
+** Description  This function is called to add an OBEX Description header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddUtf8DescrHdr(BT_HDR *p_pkt, UINT8 *p_descr);
+
+/*******************************************************************************
+**
+** Function     OBX_AddUtf8DestNameHdr
+**
+** Description  This function is called to add an OBEX DestName header
+**              to an OBEX packet.
+**
+** Returns      TRUE, if the header is added successfully.
+**              FALSE, if the operation failed. p_pkt is not altered.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_AddUtf8DestNameHdr(BT_HDR *p_pkt, UINT8 *p_dest);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadUtf8NameHdr
+**
+** Description  This function is called to get the Name Header in the given
+**              OBEX packet. If Name header exists in the given OBEX packet,
+**              it is converted to UTF8 format and copied into p_name.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadUtf8NameHdr(BT_HDR *p_pkt, UINT8 *p_name, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadUtf8DescrHdr
+**
+** Description  This function is called to get the Description Header in the
+**              given OBEX packet. If Description header exists in the given
+**              OBEX packet, it is converted to UTF8 format and copied into
+**              p_descr.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadUtf8DescrHdr(BT_HDR *p_pkt, UINT8 *p_descr, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_ReadUtf8DestNameHdr
+**
+** Description  This function is called to get the DestName Header in the
+**              given OBEX packet.
+**
+** Returns      TRUE, if the header is in the OBEX packet.
+**              FALSE, otherwise.
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_ReadUtf8DestNameHdr(BT_HDR *p_pkt, UINT8 *p_dest, UINT16 max_len);
+
+/*******************************************************************************
+**
+** Function     OBX_VerifyResponse
+**
+** Description  This function is called by the client to verify the challenge
+**              response.
+**
+** Returns      TRUE, if successful.
+**              FALSE, if authentication failed
+**
+*******************************************************************************/
+OBX_API extern BOOLEAN OBX_VerifyResponse(UINT32 nonce_u32, UINT8 *p_password, UINT8 password_len, UINT8 *p_response);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* OBX_API_H */
diff --git a/stack/include/pan_api.h b/stack/include/pan_api.h
new file mode 100644
index 0000000..a604463
--- /dev/null
+++ b/stack/include/pan_api.h
@@ -0,0 +1,459 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the PAN API definitions
+ *
+ ******************************************************************************/
+#ifndef PAN_API_H
+#define PAN_API_H
+
+#include "bnep_api.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* Define the minimum offset needed in a GKI buffer for
+** sending PAN packets. Note, we are currently not sending
+** extension headers, but may in the future, so allow
+** space for them
+*/
+#define PAN_MINIMUM_OFFSET          BNEP_MINIMUM_OFFSET
+
+
+/*
+** The handle is passed from BNEP to PAN. The same handle is used
+** between PAN and application as well
+*/
+#define PAN_INVALID_HANDLE          BNEP_INVALID_HANDLE
+
+/* Bit map for PAN roles */
+#define PAN_ROLE_CLIENT         0x01     /* PANU role */
+#define PAN_ROLE_GN_SERVER      0x02     /* GN role */
+#define PAN_ROLE_NAP_SERVER     0x04     /* NAP role */
+
+/* Bitmap to indicate the usage of the Data */
+#define PAN_DATA_TO_HOST        0x01
+#define PAN_DATA_TO_LAN         0x02
+
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* Define the result codes from PAN */
+enum
+{
+    PAN_SUCCESS,                                                /* Success                           */
+    PAN_DISCONNECTED            = BNEP_CONN_DISCONNECTED,       /* Connection terminated   */
+    PAN_CONN_FAILED             = BNEP_CONN_FAILED,             /* Connection failed                 */
+    PAN_NO_RESOURCES            = BNEP_NO_RESOURCES,            /* No resources                      */
+    PAN_MTU_EXCEDED             = BNEP_MTU_EXCEDED,             /* Attempt to write long data        */
+    PAN_INVALID_OFFSET          = BNEP_INVALID_OFFSET,          /* Insufficient offset in GKI buffer */
+    PAN_CONN_FAILED_CFG         = BNEP_CONN_FAILED_CFG,         /* Connection failed cos of config   */
+    PAN_INVALID_SRC_ROLE        = BNEP_CONN_FAILED_SRC_UUID,    /* Connection failed wrong source UUID   */
+    PAN_INVALID_DST_ROLE        = BNEP_CONN_FAILED_DST_UUID,    /* Connection failed wrong destination UUID   */
+    PAN_CONN_FAILED_UUID_SIZE   = BNEP_CONN_FAILED_UUID_SIZE,   /* Connection failed wrong size UUID   */
+    PAN_Q_SIZE_EXCEEDED         = BNEP_Q_SIZE_EXCEEDED,         /* Too many buffers to dest          */
+    PAN_TOO_MANY_FILTERS        = BNEP_TOO_MANY_FILTERS,        /* Too many local filters specified  */
+    PAN_SET_FILTER_FAIL         = BNEP_SET_FILTER_FAIL,         /* Set Filter failed  */
+    PAN_WRONG_HANDLE            = BNEP_WRONG_HANDLE,            /* Wrong handle for the connection  */
+    PAN_WRONG_STATE             = BNEP_WRONG_STATE,             /* Connection is in wrong state */
+    PAN_SECURITY_FAIL           = BNEP_SECURITY_FAIL,           /* Failed because of security */
+    PAN_IGNORE_CMD              = BNEP_IGNORE_CMD,              /* To ignore the rcvd command */
+    PAN_TX_FLOW_ON              = BNEP_TX_FLOW_ON,              /* tx data flow enabled */
+    PAN_TX_FLOW_OFF	            = BNEP_TX_FLOW_OFF,             /* tx data flow disabled */
+    PAN_FAILURE                                                 /* Failure                      */
+
+};
+typedef UINT8 tPAN_RESULT;
+
+
+/*****************************************************************
+**       Callback Function Prototypes
+*****************************************************************/
+
+/* This is call back function used to report connection status
+**      to the application. The second parameter TRUE means
+**      to create the bridge and FALSE means to remove it.
+*/
+typedef void (tPAN_CONN_STATE_CB) (UINT16 handle, BD_ADDR bd_addr, tPAN_RESULT state, BOOLEAN is_role_change,
+                                        UINT8 src_role, UINT8 dst_role);
+
+
+/* This is call back function used to create bridge for the
+**      Connected device. The parameter "state" indicates
+**      whether to create the bridge or remove it. TRUE means
+**      to create the bridge and FALSE means to remove it.
+*/
+typedef void (tPAN_BRIDGE_REQ_CB) (BD_ADDR bd_addr, BOOLEAN state);
+
+
+/* Data received indication callback prototype. Parameters are
+**              Source BD/Ethernet Address
+**              Dest BD/Ethernet address
+**              Protocol
+**              Address of buffer (or data if non-GKI)
+**              Length of data (non-GKI)
+**              ext is flag to indicate whether it has aby extension headers
+**              Flag used to indicate to forward on LAN
+**                      FALSE - Use it for internal stack
+**                      TRUE  - Send it across the ethernet as well
+*/
+typedef void (tPAN_DATA_IND_CB) (UINT16 handle,
+                                 BD_ADDR src,
+                                 BD_ADDR dst,
+                                 UINT16 protocol,
+                                 UINT8 *p_data,
+                                 UINT16 len,
+                                 BOOLEAN ext,
+                                 BOOLEAN forward);
+
+
+/* Data buffer received indication callback prototype. Parameters are
+**              Source BD/Ethernet Address
+**              Dest BD/Ethernet address
+**              Protocol
+**              pointer to the data buffer
+**              ext is flag to indicate whether it has aby extension headers
+**              Flag used to indicate to forward on LAN
+**                      FALSE - Use it for internal stack
+**                      TRUE  - Send it across the ethernet as well
+*/
+typedef void (tPAN_DATA_BUF_IND_CB) (UINT16 handle,
+                                     BD_ADDR src,
+                                     BD_ADDR dst,
+                                     UINT16 protocol,
+                                     BT_HDR *p_buf,
+                                     BOOLEAN ext,
+                                     BOOLEAN forward);
+
+
+/* Flow control callback for TX data. Parameters are
+**              Handle to the connection
+**              Event  flow status
+*/
+typedef void (tPAN_TX_DATA_FLOW_CB) (UINT16 handle,
+                                     tPAN_RESULT  event);
+
+/* Filters received indication callback prototype. Parameters are
+**              Handle to the connection
+**              TRUE if the cb is called for indication
+**              Ignore this if it is indication, otherwise it is the result
+**                      for the filter set operation performed by the local
+**                      device
+**              Number of protocol filters present
+**              Pointer to the filters start. Filters are present in pairs
+**                      of start of the range and end of the range.
+**                      They will be present in big endian order. First
+**                      two bytes will be starting of the first range and
+**                      next two bytes will be ending of the range.
+*/
+typedef void (tPAN_FILTER_IND_CB) (UINT16 handle,
+                                   BOOLEAN indication,
+                                   tBNEP_RESULT result,
+                                   UINT16 num_filters,
+                                   UINT8 *p_filters);
+
+
+
+/* Multicast Filters received indication callback prototype. Parameters are
+**              Handle to the connection
+**              TRUE if the cb is called for indication
+**              Ignore this if it is indication, otherwise it is the result
+**                      for the filter set operation performed by the local
+**                      device
+**              Number of multicast filters present
+**              Pointer to the filters start. Filters are present in pairs
+**                      of start of the range and end of the range.
+**                      First six bytes will be starting of the first range and
+**                      next six bytes will be ending of the range.
+*/
+typedef void (tPAN_MFILTER_IND_CB) (UINT16 handle,
+                                    BOOLEAN indication,
+                                    tBNEP_RESULT result,
+                                    UINT16 num_mfilters,
+                                    UINT8 *p_mfilters);
+
+
+
+
+/* This structure is used to register with PAN profile
+** It is passed as a parameter to PAN_Register call.
+*/
+typedef struct
+{
+    tPAN_CONN_STATE_CB          *pan_conn_state_cb;     /* Connection state callback */
+    tPAN_BRIDGE_REQ_CB          *pan_bridge_req_cb;     /* Bridge request callback */
+    tPAN_DATA_IND_CB            *pan_data_ind_cb;       /* Data indication callback */
+    tPAN_DATA_BUF_IND_CB        *pan_data_buf_ind_cb;   /* Data buffer indication callback */
+    tPAN_FILTER_IND_CB          *pan_pfilt_ind_cb;      /* protocol filter indication callback */
+    tPAN_MFILTER_IND_CB         *pan_mfilt_ind_cb;      /* multicast filter indication callback */
+    tPAN_TX_DATA_FLOW_CB        *pan_tx_data_flow_cb;   /* data flow callback */
+    char                        *user_service_name;     /* Service name for PANU role */
+    char                        *gn_service_name;       /* Service name for GN role */
+    char                        *nap_service_name;      /* Service name for NAP role */
+
+} tPAN_REGISTER;
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         PAN_Register
+**
+** Description      This function is called by the application to register
+**                  its callbacks with PAN profile. The application then
+**                  should set the PAN role explicitly.
+**
+** Parameters:      p_register - contains all callback function pointers
+**
+**
+** Returns          none
+**
+*******************************************************************************/
+PAN_API extern void PAN_Register (tPAN_REGISTER *p_register);
+
+
+/*******************************************************************************
+**
+** Function         PAN_Deregister
+**
+** Description      This function is called by the application to de-register
+**                  its callbacks with PAN profile. This will make the PAN to
+**                  become inactive. This will deregister PAN services from SDP
+**                  and close all active connections
+**
+** Returns          none
+**
+*******************************************************************************/
+PAN_API extern void PAN_Deregister (void);
+
+/*******************************************************************************
+**
+** Function         PAN_SetRole
+**
+** Description      This function is called by the application to set the PAN
+**                  profile role. This should be called after PAN_Register.
+**                  This can be called any time to change the PAN role
+**
+** Parameters:      role        - is bit map of roles to be active
+**                                      PAN_ROLE_CLIENT is for PANU role
+**                                      PAN_ROLE_GN_SERVER is for GN role
+**                                      PAN_ROLE_NAP_SERVER is for NAP role
+**                  sec_mask    - Security mask for different roles
+**                                      It is array of UINT8. The byte represent the
+**                                      security for roles PANU, GN and NAP in order
+**                  p_user_name - Service name for PANU role
+**                  p_gn_name   - Service name for GN role
+**                  p_nap_name  - Service name for NAP role
+**                                      Can be NULL if user wants it to be default
+**
+** Returns          PAN_SUCCESS     - if the role is set successfully
+**                  PAN_FAILURE     - if the role is not valid
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_SetRole (UINT8 role,
+                                       UINT8 *sec_mask,
+                                       char *p_user_name,
+                                       char *p_gn_name,
+                                       char *p_nap_name);
+
+/*******************************************************************************
+**
+** Function         PAN_Connect
+**
+** Description      This function is called by the application to initiate a
+**                  connection to the remote device
+**
+** Parameters:      rem_bda     - BD Addr of the remote device
+**                  src_role    - Role of the local device for the connection
+**                  dst_role    - Role of the remote device for the connection
+**                                      PAN_ROLE_CLIENT is for PANU role
+**                                      PAN_ROLE_GN_SERVER is for GN role
+**                                      PAN_ROLE_NAP_SERVER is for NAP role
+**                  *handle     - Pointer for returning Handle to the connection
+**
+** Returns          PAN_SUCCESS      - if the connection is initiated successfully
+**                  PAN_NO_RESOURCES - resources are not sufficent
+**                  PAN_FAILURE      - if the connection cannot be initiated
+**                                           this can be because of the combination of
+**                                           src and dst roles may not be valid or
+**                                           allowed at that point of time
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_Connect (BD_ADDR rem_bda, UINT8 src_role, UINT8 dst_role, UINT16 *handle);
+
+/*******************************************************************************
+**
+** Function         PAN_Disconnect
+**
+** Description      This is used to disconnect the connection
+**
+** Parameters:      handle           - handle for the connection
+**
+** Returns          PAN_SUCCESS      - if the connection is closed successfully
+**                  PAN_FAILURE      - if the connection is not found or
+**                                           there is an error in disconnecting
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_Disconnect (UINT16 handle);
+
+/*******************************************************************************
+**
+** Function         PAN_Write
+**
+** Description      This sends data over the PAN connections. If this is called
+**                  on GN or NAP side and the packet is multicast or broadcast
+**                  it will be sent on all the links. Otherwise the correct link
+**                  is found based on the destination address and forwarded on it
+**                  If the return value is not PAN_SUCCESS the application should
+**                  take care of releasing the message buffer
+**
+** Parameters:      dst      - MAC or BD Addr of the destination device
+**                  src      - MAC or BD Addr of the source who sent this packet
+**                  protocol - protocol of the ethernet packet like IP or ARP
+**                  p_data   - pointer to the data
+**                  len      - length of the data
+**                  ext      - to indicate that extension headers present
+**
+** Returns          PAN_SUCCESS       - if the data is sent successfully
+**                  PAN_FAILURE       - if the connection is not found or
+**                                           there is an error in sending data
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_Write (UINT16 handle,
+                                     BD_ADDR dst,
+                                     BD_ADDR src,
+                                     UINT16 protocol,
+                                     UINT8 *p_data,
+                                     UINT16 len,
+                                     BOOLEAN ext);
+
+/*******************************************************************************
+**
+** Function         PAN_WriteBuf
+**
+** Description      This sends data over the PAN connections. If this is called
+**                  on GN or NAP side and the packet is multicast or broadcast
+**                  it will be sent on all the links. Otherwise the correct link
+**                  is found based on the destination address and forwarded on it
+**                  If the return value is not PAN_SUCCESS the application should
+**                  take care of releasing the message buffer
+**
+** Parameters:      dst      - MAC or BD Addr of the destination device
+**                  src      - MAC or BD Addr of the source who sent this packet
+**                  protocol - protocol of the ethernet packet like IP or ARP
+**                  p_buf    - pointer to the data buffer
+**                  ext      - to indicate that extension headers present
+**
+** Returns          PAN_SUCCESS       - if the data is sent successfully
+**                  PAN_FAILURE       - if the connection is not found or
+**                                           there is an error in sending data
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_WriteBuf (UINT16 handle,
+                                        BD_ADDR dst,
+                                        BD_ADDR src,
+                                        UINT16 protocol,
+                                        BT_HDR *p_buf,
+                                        BOOLEAN ext);
+
+/*******************************************************************************
+**
+** Function         PAN_SetProtocolFilters
+**
+** Description      This function is used to set protocol filters on the peer
+**
+** Parameters:      handle      - handle for the connection
+**                  num_filters - number of protocol filter ranges
+**                  start       - array of starting protocol numbers
+**                  end         - array of ending protocol numbers
+**
+**
+** Returns          PAN_SUCCESS        if protocol filters are set successfully
+**                  PAN_FAILURE        if connection not found or error in setting
+**
+*******************************************************************************/
+PAN_API extern tPAN_RESULT PAN_SetProtocolFilters (UINT16 handle,
+                                                  UINT16 num_filters,
+                                                  UINT16 *p_start_array,
+                                                  UINT16 *p_end_array);
+
+/*******************************************************************************
+**
+** Function         PAN_SetMulticastFilters
+**
+** Description      This function is used to set multicast filters on the peer
+**
+** Parameters:      handle      - handle for the connection
+**                  num_filters - number of multicast filter ranges
+**                  p_start_array - Pointer to sequence of beginings of all
+**                                         multicast address ranges
+**                  p_end_array   - Pointer to sequence of ends of all
+**                                         multicast address ranges
+**
+**
+** Returns          PAN_SUCCESS        if multicast filters are set successfully
+**                  PAN_FAILURE        if connection not found or error in setting
+**
+*******************************************************************************/
+PAN_API extern tBNEP_RESULT PAN_SetMulticastFilters (UINT16 handle,
+                                                    UINT16 num_mcast_filters,
+                                                    UINT8 *p_start_array,
+                                                    UINT8 *p_end_array);
+
+/*******************************************************************************
+**
+** Function         PAN_SetTraceLevel
+**
+** Description      This function sets the trace level for PAN. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+PAN_API extern UINT8 PAN_SetTraceLevel (UINT8 new_level);
+
+/*******************************************************************************
+**
+** Function         PAN_Init
+**
+** Description      This function initializes the PAN unit. It should be called
+**                  before accessing any other APIs to initialize the control
+**                  block.
+**
+** Returns          void
+**
+*******************************************************************************/
+PAN_API extern void PAN_Init (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* PAN_API_H */
diff --git a/stack/include/port_api.h b/stack/include/port_api.h
new file mode 100644
index 0000000..2f64932
--- /dev/null
+++ b/stack/include/port_api.h
@@ -0,0 +1,635 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the PORT API definitions
+ *
+ ******************************************************************************/
+#ifndef PORT_API_H
+#define PORT_API_H
+
+#include "bt_target.h"
+
+/*****************************************************************************
+**  Constants and Types
+*****************************************************************************/
+
+/*
+** Define port settings structure send from the application in the
+** set settings request, or to the application in the set settings indication.
+*/
+typedef struct
+{
+
+#define PORT_BAUD_RATE_2400       0x00
+#define PORT_BAUD_RATE_4800       0x01
+#define PORT_BAUD_RATE_7200       0x02
+#define PORT_BAUD_RATE_9600       0x03
+#define PORT_BAUD_RATE_19200      0x04
+#define PORT_BAUD_RATE_38400      0x05
+#define PORT_BAUD_RATE_57600      0x06
+#define PORT_BAUD_RATE_115200     0x07
+#define PORT_BAUD_RATE_230400     0x08
+
+    UINT8  baud_rate;
+
+#define PORT_5_BITS               0x00
+#define PORT_6_BITS               0x01
+#define PORT_7_BITS               0x02
+#define PORT_8_BITS               0x03
+
+    UINT8  byte_size;
+
+#define PORT_ONESTOPBIT           0x00
+#define PORT_ONE5STOPBITS         0x01
+    UINT8   stop_bits;
+
+#define PORT_PARITY_NO            0x00
+#define PORT_PARITY_YES           0x01
+    UINT8   parity;
+
+#define PORT_ODD_PARITY           0x00
+#define PORT_EVEN_PARITY          0x01
+#define PORT_MARK_PARITY          0x02
+#define PORT_SPACE_PARITY         0x03
+
+    UINT8   parity_type;
+
+#define PORT_FC_OFF               0x00
+#define PORT_FC_XONXOFF_ON_INPUT  0x01
+#define PORT_FC_XONXOFF_ON_OUTPUT 0x02
+#define PORT_FC_CTS_ON_INPUT      0x04
+#define PORT_FC_CTS_ON_OUTPUT     0x08
+#define PORT_FC_DSR_ON_INPUT      0x10
+#define PORT_FC_DSR_ON_OUTPUT     0x20
+
+    UINT8 fc_type;
+
+    UINT8 rx_char1;
+
+#define PORT_XON_DC1              0x11
+    UINT8 xon_char;
+
+#define PORT_XOFF_DC3             0x13
+    UINT8 xoff_char;
+
+} tPORT_STATE;
+
+
+/*
+** Define the callback function prototypes.  Parameters are specific
+** to each event and are described bellow
+*/
+typedef int  (tPORT_DATA_CALLBACK) (UINT16 port_handle, void *p_data, UINT16 len);
+
+#define DATA_CO_CALLBACK_TYPE_INCOMING          1
+#define DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE     2
+#define DATA_CO_CALLBACK_TYPE_OUTGOING          3
+typedef int  (tPORT_DATA_CO_CALLBACK) (UINT16 port_handle, UINT8* p_buf, UINT16 len, int type);
+
+typedef void (tPORT_CALLBACK) (UINT32 code, UINT16 port_handle);
+
+/*
+** Define events that registered application can receive in the callback
+*/
+
+#define PORT_EV_RXCHAR  0x00000001   /* Any Character received */
+#define PORT_EV_RXFLAG  0x00000002   /* Received certain character */
+#define PORT_EV_TXEMPTY 0x00000004   /* Transmitt Queue Empty */
+#define PORT_EV_CTS     0x00000008   /* CTS changed state */
+#define PORT_EV_DSR     0x00000010   /* DSR changed state */
+#define PORT_EV_RLSD    0x00000020   /* RLSD changed state */
+#define PORT_EV_BREAK   0x00000040   /* BREAK received */
+#define PORT_EV_ERR     0x00000080   /* Line status error occurred */
+#define PORT_EV_RING    0x00000100   /* Ring signal detected */
+#define PORT_EV_CTSS    0x00000400   /* CTS state */
+#define PORT_EV_DSRS    0x00000800   /* DSR state */
+#define PORT_EV_RLSDS   0x00001000   /* RLSD state */
+#define PORT_EV_OVERRUN 0x00002000   /* receiver buffer overrun */
+#define PORT_EV_TXCHAR  0x00004000   /* Any character transmitted */
+
+#define PORT_EV_CONNECTED    0x00000200  /* RFCOMM connection established */
+#define PORT_EV_CONNECT_ERR  0x00008000  /* Was not able to establish connection */
+                                     /* or disconnected */
+#define PORT_EV_FC      0x00010000   /* data flow enabled flag changed by remote */
+#define PORT_EV_FCS     0x00020000   /* data flow enable status true = enabled */
+
+/*
+** To register for events application should provide bitmask with
+** corresponding bit set
+*/
+
+#define PORT_MASK_ALL             (PORT_EV_RXCHAR | PORT_EV_TXEMPTY | PORT_EV_CTS | \
+                                   PORT_EV_DSR | PORT_EV_RLSD | PORT_EV_BREAK | \
+                                   PORT_EV_ERR | PORT_EV_RING | PORT_EV_CONNECT_ERR | \
+                                   PORT_EV_DSRS | PORT_EV_CTSS | PORT_EV_RLSDS | \
+                                   PORT_EV_RXFLAG | PORT_EV_TXCHAR | PORT_EV_OVERRUN | \
+                                   PORT_EV_FC | PORT_EV_FCS | PORT_EV_CONNECTED)
+
+
+/*
+** Define port result codes
+*/
+#define PORT_SUCCESS                0
+
+#define PORT_ERR_BASE               0
+
+#define PORT_UNKNOWN_ERROR          (PORT_ERR_BASE + 1)
+#define PORT_ALREADY_OPENED         (PORT_ERR_BASE + 2)
+#define PORT_CMD_PENDING            (PORT_ERR_BASE + 3)
+#define PORT_APP_NOT_REGISTERED     (PORT_ERR_BASE + 4)
+#define PORT_NO_MEM                 (PORT_ERR_BASE + 5)
+#define PORT_NO_RESOURCES           (PORT_ERR_BASE + 6)
+#define PORT_BAD_BD_ADDR            (PORT_ERR_BASE + 7)
+#define PORT_BAD_HANDLE             (PORT_ERR_BASE + 9)
+#define PORT_NOT_OPENED             (PORT_ERR_BASE + 10)
+#define PORT_LINE_ERR               (PORT_ERR_BASE + 11)
+#define PORT_START_FAILED           (PORT_ERR_BASE + 12)
+#define PORT_PAR_NEG_FAILED         (PORT_ERR_BASE + 13)
+#define PORT_PORT_NEG_FAILED        (PORT_ERR_BASE + 14)
+#define PORT_SEC_FAILED             (PORT_ERR_BASE + 15)
+#define PORT_PEER_CONNECTION_FAILED (PORT_ERR_BASE + 16)
+#define PORT_PEER_FAILED            (PORT_ERR_BASE + 17)
+#define PORT_PEER_TIMEOUT           (PORT_ERR_BASE + 18)
+#define PORT_CLOSED                 (PORT_ERR_BASE + 19)
+#define PORT_TX_FULL                (PORT_ERR_BASE + 20)
+#define PORT_LOCAL_CLOSED           (PORT_ERR_BASE + 21)
+#define PORT_LOCAL_TIMEOUT          (PORT_ERR_BASE + 22)
+#define PORT_TX_QUEUE_DISABLED      (PORT_ERR_BASE + 23)
+#define PORT_PAGE_TIMEOUT           (PORT_ERR_BASE + 24)
+#define PORT_INVALID_SCN            (PORT_ERR_BASE + 25)
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         RFCOMM_CreateConnection
+**
+** Description      RFCOMM_CreateConnection function is used from the application
+**                  to establish serial port connection to the peer device,
+**                  or allow RFCOMM to accept a connection from the peer
+**                  application.
+**
+** Parameters:      scn          - Service Channel Number as registered with
+**                                 the SDP (server) or obtained using SDP from
+**                                 the peer device (client).
+**                  is_server    - TRUE if requesting application is a server
+**                  mtu          - Maximum frame size the application can accept
+**                  bd_addr      - BD_ADDR of the peer (client)
+**                  mask         - specifies events to be enabled.  A value
+**                                 of zero disables all events.
+**                  p_handle     - OUT pointer to the handle.
+**                  p_mgmt_cb    - pointer to callback function to receive
+**                                 connection up/down events.
+** Notes:
+**
+** Server can call this function with the same scn parameter multiple times if
+** it is ready to accept multiple simulteneous connections.
+**
+** DLCI for the connection is (scn * 2 + 1) if client originates connection on
+** existing none initiator multiplexer channel.  Otherwise it is (scn * 2).
+** For the server DLCI can be changed later if client will be calling it using
+** (scn * 2 + 1) dlci.
+**
+*******************************************************************************/
+RFC_API extern int RFCOMM_CreateConnection (UINT16 uuid, UINT8 scn,
+                                            BOOLEAN is_server, UINT16 mtu,
+                                            BD_ADDR bd_addr, UINT16 *p_handle,
+                                            tPORT_CALLBACK *p_mgmt_cb);
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_RemoveConnection
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle     - Handle of the port returned in the Open
+**
+*******************************************************************************/
+RFC_API extern int RFCOMM_RemoveConnection (UINT16 handle);
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_RemoveServer
+**
+** Description      This function is called to close the server port.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**
+*******************************************************************************/
+RFC_API extern int RFCOMM_RemoveServer (UINT16 handle);
+
+
+/*******************************************************************************
+**
+** Function         PORT_SetEventCallback
+**
+** Description      Set event callback the specified connection.
+**
+** Parameters:      handle       - Handle of the port returned in the Open
+**                  p_callback   - address of the callback function which should
+**                                 be called from the RFCOMM when an event
+**                                 specified in the mask occurs.
+**
+*******************************************************************************/
+RFC_API extern int PORT_SetEventCallback (UINT16 port_handle,
+                                          tPORT_CALLBACK *p_port_cb);
+
+
+/*******************************************************************************
+**
+** Function         PORT_SetEventCallback
+**
+** Description      Set event data callback the specified connection.
+**
+** Parameters:      handle       - Handle of the port returned in the Open
+**                  p_callback   - address of the callback function which should
+**                                 be called from the RFCOMM when a data
+**                                 packet is received.
+**
+*******************************************************************************/
+RFC_API extern int PORT_SetDataCallback (UINT16 port_handle,
+                                         tPORT_DATA_CALLBACK *p_cb);
+
+RFC_API extern int PORT_SetDataCOCallback (UINT16 port_handle, tPORT_DATA_CO_CALLBACK *p_port_cb);
+/*******************************************************************************
+**
+** Function         PORT_SetEventMask
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle - Handle of the port returned in the Open
+**                  mask   - specifies events to be enabled.  A value
+**                           of zero disables all events.
+**
+*******************************************************************************/
+RFC_API extern int PORT_SetEventMask (UINT16 port_handle, UINT32 mask);
+
+
+/*******************************************************************************
+**
+** Function         PORT_CheckConnection
+**
+** Description      This function returns PORT_SUCCESS if connection referenced
+**                  by handle is up and running
+**
+** Parameters:      handle     - Handle of the port returned in the Open
+**                  bd_addr    - OUT bd_addr of the peer
+**                  p_lcid     - OUT L2CAP's LCID
+**
+*******************************************************************************/
+RFC_API extern int PORT_CheckConnection (UINT16 handle, BD_ADDR bd_addr,
+                                         UINT16 *p_lcid);
+
+/*******************************************************************************
+**
+** Function         PORT_IsOpening
+**
+** Description      This function returns TRUE if there is any RFCOMM connection
+**                  opening in process.
+**
+** Parameters:      TRUE if any connection opening is found
+**                  bd_addr    - bd_addr of the peer
+**
+*******************************************************************************/
+RFC_API extern BOOLEAN PORT_IsOpening (BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         PORT_SetState
+**
+** Description      This function configures connection according to the
+**                  specifications in the tPORT_STATE structure.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_settings - Pointer to a tPORT_STATE structure containing
+**                               configuration information for the connection.
+**
+*******************************************************************************/
+RFC_API extern int PORT_SetState (UINT16 handle, tPORT_STATE *p_settings);
+
+/*******************************************************************************
+**
+** Function         PORT_GetRxQueueCnt
+**
+** Description      This function return number of buffers on the rx queue.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_rx_queue_count - Pointer to return queue count in.
+**
+*******************************************************************************/
+RFC_API extern int PORT_GetRxQueueCnt (UINT16 handle, UINT16 *p_rx_queue_count);
+
+/*******************************************************************************
+**
+** Function         PORT_GetState
+**
+** Description      This function is called to fill tPORT_STATE structure
+**                  with the current control settings for the port
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_settings - Pointer to a tPORT_STATE structure in which
+**                               configuration information is returned.
+**
+*******************************************************************************/
+RFC_API extern int PORT_GetState (UINT16 handle, tPORT_STATE *p_settings);
+
+
+/*******************************************************************************
+**
+** Function         PORT_Control
+**
+** Description      This function directs a specified connection to pass control
+**                  control information to the peer device.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  signal     - specify the function to be passed
+**
+*******************************************************************************/
+#define PORT_SET_DTRDSR         0x01
+#define PORT_CLR_DTRDSR         0x02
+#define PORT_SET_CTSRTS         0x03
+#define PORT_CLR_CTSRTS         0x04
+#define PORT_SET_RI             0x05        /* DCE only */
+#define PORT_CLR_RI             0x06        /* DCE only */
+#define PORT_SET_DCD            0x07        /* DCE only */
+#define PORT_CLR_DCD            0x08        /* DCE only */
+#define PORT_BREAK              0x09        /* Break event */
+
+RFC_API extern int PORT_Control (UINT16 handle, UINT8 signal);
+
+
+/*******************************************************************************
+**
+** Function         PORT_FlowControl
+**
+** Description      This function directs a specified connection to pass
+**                  flow control message to the peer device.  Enable flag passed
+**                  shows if port can accept more data.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  enable     - enables data flow
+**
+*******************************************************************************/
+RFC_API extern int PORT_FlowControl (UINT16 handle, BOOLEAN enable);
+
+
+/*******************************************************************************
+**
+** Function         PORT_GetModemStatus
+**
+** Description      This function retrieves modem control signals.  Normally
+**                  application will call this function after a callback
+**                  function is called with notification that one of signals
+**                  has been changed.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                               callback.
+**                  p_signal   - specify the pointer to control signals info
+**
+*******************************************************************************/
+#define PORT_DTRDSR_ON          0x01
+#define PORT_CTSRTS_ON          0x02
+#define PORT_RING_ON            0x04
+#define PORT_DCD_ON             0x08
+
+/*
+** Define default initial local modem signals state set after connection established
+*/
+#define PORT_OBEX_DEFAULT_SIGNAL_STATE  (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
+#define PORT_SPP_DEFAULT_SIGNAL_STATE   (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
+#define PORT_PPP_DEFAULT_SIGNAL_STATE   (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
+#define PORT_DUN_DEFAULT_SIGNAL_STATE   (PORT_DTRDSR_ON | PORT_CTSRTS_ON)
+
+RFC_API extern int PORT_GetModemStatus (UINT16 handle, UINT8 *p_control_signal);
+
+
+/*******************************************************************************
+**
+** Function         PORT_ClearError
+**
+** Description      This function retreives information about a communications
+**                  error and reports current status of a connection.  The
+**                  function should be called when an error occures to clear
+**                  the connection error flag and to enable additional read
+**                  and write operations.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_errors   - pointer of the variable to receive error codes
+**                  p_status   - pointer to the tPORT_STATUS structur to receive
+**                               connection status
+**
+*******************************************************************************/
+
+#define PORT_ERR_BREAK      0x01    /* Break condition occured on the peer device */
+#define PORT_ERR_OVERRUN    0x02    /* Overrun is reported by peer device */
+#define PORT_ERR_FRAME      0x04    /* Framing error reported by peer device */
+#define PORT_ERR_RXOVER     0x08    /* Input queue overflow occured */
+#define PORT_ERR_TXFULL     0x10    /* Output queue overflow occured */
+
+typedef struct
+{
+#define PORT_FLAG_CTS_HOLD  0x01    /* Tx is waiting for CTS signal */
+#define PORT_FLAG_DSR_HOLD  0x02    /* Tx is waiting for DSR signal */
+#define PORT_FLAG_RLSD_HOLD 0x04    /* Tx is waiting for RLSD signal */
+
+    UINT16  flags;
+    UINT16  in_queue_size;          /* Number of bytes in the input queue */
+    UINT16  out_queue_size;         /* Number of bytes in the output queue */
+    UINT16  mtu_size;               /* peer MTU size */
+} tPORT_STATUS;
+
+
+RFC_API extern int PORT_ClearError (UINT16 handle, UINT16 *p_errors,
+                                    tPORT_STATUS *p_status);
+
+
+/*******************************************************************************
+**
+** Function         PORT_SendError
+**
+** Description      This function send a communications error to the peer device
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  errors     - receive error codes
+**
+*******************************************************************************/
+RFC_API extern int PORT_SendError (UINT16 handle, UINT8 errors);
+
+
+/*******************************************************************************
+**
+** Function         PORT_GetQueueStatus
+**
+** Description      This function reports current status of a connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_status   - pointer to the tPORT_STATUS structur to receive
+**                               connection status
+**
+*******************************************************************************/
+RFC_API extern int PORT_GetQueueStatus (UINT16 handle, tPORT_STATUS *p_status);
+
+
+/*******************************************************************************
+**
+** Function         PORT_Purge
+**
+** Description      This function discards all the data from the output or
+**                  input queues of the specified connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  purge_flags - specify the action to take.
+**
+*******************************************************************************/
+#define PORT_PURGE_TXCLEAR  0x01
+#define PORT_PURGE_RXCLEAR  0x02
+
+RFC_API extern int PORT_Purge (UINT16 handle, UINT8 purge_flags);
+
+
+/*******************************************************************************
+**
+** Function         PORT_Read
+**
+** Description      This function returns the pointer to the buffer received
+**                  from the peer device.  Normally application will call this
+**                  function after receiving PORT_EVT_RXCHAR event.
+**                  Application calling this function is responsible to free
+**                  buffer returned.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                                callback.
+**                  pp_buf      - pointer to address of buffer with data,
+**
+*******************************************************************************/
+RFC_API extern int PORT_Read (UINT16 handle, BT_HDR **pp_buf);
+
+
+/*******************************************************************************
+**
+** Function         PORT_ReadData
+**
+** Description      Normally application will call this function after receiving
+**                  PORT_EVT_RXCHAR event.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                                callback.
+**                  p_data      - Data area
+**                  max_len     - Byte count requested
+**                  p_len       - Byte count received
+**
+*******************************************************************************/
+RFC_API extern int PORT_ReadData (UINT16 handle, char *p_data, UINT16 max_len,
+                                  UINT16 *p_len);
+
+
+/*******************************************************************************
+**
+** Function         PORT_Write
+**
+** Description      This function to send BT buffer to the peer device.
+**                  Application should not free the buffer.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_buf       - pointer to the buffer with data,
+**
+*******************************************************************************/
+RFC_API extern int PORT_Write (UINT16 handle, BT_HDR *p_buf);
+
+
+/*******************************************************************************
+**
+** Function         PORT_WriteData
+**
+** Description      This function is called from the legacy application to
+**                  send data.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_data      - Data area
+**                  max_len     - Byte count to write
+**                  p_len       - Bytes written
+**
+*******************************************************************************/
+RFC_API extern int PORT_WriteData (UINT16 handle, char *p_data, UINT16 max_len,
+                                   UINT16 *p_len);
+
+/*******************************************************************************
+**
+** Function         PORT_WriteDataCO
+**
+** Description      Normally not GKI aware application will call this function
+**                  to send data to the port by callout functions.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**
+*******************************************************************************/
+RFC_API extern int PORT_WriteDataCO (UINT16 handle, int* p_len);
+
+/*******************************************************************************
+**
+** Function         PORT_Test
+**
+** Description      Application can call this function to send RFCOMM Test frame
+**
+** Parameters:      handle      - Handle returned in the RFCOMM_CreateConnection
+**                  p_data      - Data area
+**                  max_len     - Byte count requested
+**
+*******************************************************************************/
+RFC_API extern int PORT_Test (UINT16 handle, UINT8 *p_data, UINT16 len);
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_Init
+**
+** Description      This function is called to initialize RFCOMM layer
+**
+*******************************************************************************/
+RFC_API extern void RFCOMM_Init (void);
+
+
+/*******************************************************************************
+**
+** Function         PORT_SetTraceLevel
+**
+** Description      This function sets the trace level for RFCOMM. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+RFC_API extern UINT8 PORT_SetTraceLevel (UINT8 new_level);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* PORT_API_H */
diff --git a/stack/include/port_ext.h b/stack/include/port_ext.h
new file mode 100644
index 0000000..e25b6d9
--- /dev/null
+++ b/stack/include/port_ext.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains external definitions of Port Emulation entity unit
+ *
+ ******************************************************************************/
+
+#ifndef PORTEXT_H
+#define PORTEXT_H
+
+#include "gki.h"
+
+/* Port emulation entity Entry Points */
+extern void rfcomm_process_timeout (TIMER_LIST_ENT  *p_tle);
+#endif
diff --git a/stack/include/rfcdefs.h b/stack/include/rfcdefs.h
new file mode 100644
index 0000000..dcc37bc
--- /dev/null
+++ b/stack/include/rfcdefs.h
@@ -0,0 +1,248 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/****************************************************************************
+ *
+ *  This file contains definitions for the RFCOMM protocol
+ *
+ ****************************************************************************/
+
+#ifndef RFCDEFS_H
+#define RFCDEFS_H
+
+#define PORT_MAX_RFC_PORTS              31
+
+/*
+**  If nothing is negotiated MTU should be 127
+*/
+#define RFCOMM_DEFAULT_MTU              127
+
+/*
+** Define used by RFCOMM TS frame types
+*/
+#define RFCOMM_SABME                    0x2F
+#define RFCOMM_UA                       0x63
+#define RFCOMM_DM                       0x0F
+#define RFCOMM_DISC                     0x43
+#define RFCOMM_UIH                      0xEF
+
+/*
+** Defenitions for the TS control frames
+*/
+#define RFCOMM_CTRL_FRAME_LEN           3
+#define RFCOMM_MIN_OFFSET               5 /* ctrl 2 , len 1 or 2 bytes, credit 1 byte */
+#define RFCOMM_DATA_OVERHEAD            (RFCOMM_MIN_OFFSET + 1)  /* add 1 for checksum */
+
+#define RFCOMM_EA                       1
+#define RFCOMM_EA_MASK                  0x01
+#define RFCOMM_CR_MASK                  0x02
+#define RFCOMM_SHIFT_CR                 1
+#define RFCOMM_SHIFT_DLCI               2
+#define RFCOMM_SHIFT_DLCI2              6
+#define RFCOMM_PF                       0x10
+#define RFCOMM_PF_MASK                  0x10
+#define RFCOMM_PF_OFFSET                4
+#define RFCOMM_SHIFT_LENGTH1            1
+#define RFCOMM_SHIFT_LENGTH2            7
+#define RFCOMM_SHIFT_MX_CTRL_TYPE       2
+
+#define RFCOMM_INITIATOR_CMD            1
+#define RFCOMM_INITIATOR_RSP            0
+#define RFCOMM_RESPONDER_CMD            0
+#define RFCOMM_RESPONDER_RSP            1
+
+#define RFCOMM_PARSE_CTRL_FIELD(ea, cr, dlci, p_data)       \
+{                                                           \
+    ea = *p_data & RFCOMM_EA;                               \
+    cr = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;     \
+    dlci = *p_data++ >> RFCOMM_SHIFT_DLCI;                  \
+    if (!ea) dlci += *p_data++ << RFCOMM_SHIFT_DLCI2;       \
+}
+
+#define RFCOMM_FORMAT_CTRL_FIELD(p_data, ea, cr, dlci)      \
+    *p_data++ = ea | cr | (dlci << RFCOMM_SHIFT_DLCI)
+
+#define RFCOMM_PARSE_TYPE_FIELD(type, pf, p_data)           \
+{                                                           \
+    type = *p_data & ~RFCOMM_PF_MASK;                       \
+    pf   = (*p_data++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET;\
+}
+
+#define RFCOMM_FORMAT_TYPE_FIELD(p_data, type, pf)          \
+    *p_data++ = (type | (pf << RFCOMM_PF_OFFSET))           \
+{                                                           \
+    type = *p_data & ~RFCOMM_PF_MASK;                       \
+    pf   = (*p_data++ & RFCOMM_PF_MASK) >> RFCOMM_PF_OFFSET;\
+}
+
+#define RFCOMM_PARSE_LEN_FIELD(ea, length, p_data)          \
+{                                                           \
+    ea = (*p_data & RFCOMM_EA);                             \
+    length = (*p_data++ >> RFCOMM_SHIFT_LENGTH1);           \
+    if (!ea) length += (*p_data++ << RFCOMM_SHIFT_LENGTH2); \
+}
+
+#define RFCOMM_FRAME_IS_CMD(initiator, cr)                  \
+    (( (initiator) && !(cr)) || (!(initiator) &&  (cr)))
+
+#define RFCOMM_FRAME_IS_RSP(initiator, cr)                  \
+    (( (initiator) &&  (cr)) || (!(initiator) && !(cr)))
+
+#define RFCOMM_CR(initiator, is_command)                    \
+    (( ( (initiator) &&  (is_command))                      \
+    || (!(initiator) && !(is_command))) << 1)
+
+#define RFCOMM_I_CR(is_command) ((is_command) ? 0x02 : 0x00)
+
+#define RFCOMM_MAX_DLCI             61
+
+#define RFCOMM_VALID_DLCI(dlci)                             \
+    (((dlci) == 0) || (((dlci) >= 2) && ((dlci) <= RFCOMM_MAX_DLCI)))
+
+
+/* Port Negotiation (PN) */
+#define RFCOMM_PN_DLCI_MASK         0x3F
+
+#define RFCOMM_PN_FRAM_TYPE_UIH     0x00
+#define RFCOMM_PN_FRAME_TYPE_MASK   0x0F
+
+#define RFCOMM_PN_CONV_LAYER_MASK   0xF0
+#define RFCOMM_PN_CONV_LAYER_TYPE_1 0
+#define RFCOMM_PN_CONV_LAYER_CBFC_I 0xF0
+#define RFCOMM_PN_CONV_LAYER_CBFC_R 0xE0
+
+#define RFCOMM_PN_PRIORITY_MASK     0x3F
+#define RFCOMM_PN_PRIORITY_0        0
+
+#define RFCOMM_PN_K_MASK            0x07
+
+#define RFCOMM_T1_DSEC              0 /* None negotiable in RFCOMM */
+#define RFCOMM_N2                   0 /* Number of retransmissions */
+#define RFCOMM_K                    0 /* Window size */
+#define RFCOMM_K_MAX                7 /* Max value of K for credit based flow control */
+
+#define RFCOMM_MSC_FC               0x02          /* Flow control*/
+#define RFCOMM_MSC_RTC              0x04          /* Ready to communicate*/
+#define RFCOMM_MSC_RTR              0x08          /* Ready to receive*/
+#define RFCOMM_MSC_IC               0x40          /* Incomming call indicator*/
+#define RFCOMM_MSC_DV               0x80          /* Data Valid*/
+
+#define RFCOMM_MSC_SHIFT_BREAK          4
+#define RFCOMM_MSC_BREAK_MASK           0xF0
+#define RFCOMM_MSC_BREAK_PRESENT_MASK   0x02
+
+#define RFCOMM_BAUD_RATE_2400           0x00
+#define RFCOMM_BAUD_RATE_4800           0x01
+#define RFCOMM_BAUD_RATE_7200           0x02
+#define RFCOMM_BAUD_RATE_9600           0x03
+#define RFCOMM_BAUD_RATE_19200          0x04
+#define RFCOMM_BAUD_RATE_38400          0x05
+#define RFCOMM_BAUD_RATE_57600          0x06
+#define RFCOMM_BAUD_RATE_115200         0x07
+#define RFCOMM_BAUD_RATE_230400         0x08
+
+#define RFCOMM_5_BITS                   0x00
+#define RFCOMM_6_BITS                   0x01
+#define RFCOMM_7_BITS                   0x02
+#define RFCOMM_8_BITS                   0x03
+
+#define RFCOMM_RPN_BITS_MASK            0x03
+#define RFCOMM_RPN_BITS_SHIFT           0
+
+#define RFCOMM_ONESTOPBIT               0x00
+#define RFCOMM_ONE5STOPBITS             0x01
+
+#define RFCOMM_RPN_STOP_BITS_MASK       0x01
+#define RFCOMM_RPN_STOP_BITS_SHIFT      2
+
+#define RFCOMM_PARITY_NO                0x00
+#define RFCOMM_PARITY_YES               0x01
+#define RFCOMM_RPN_PARITY_MASK          0x01
+#define RFCOMM_RPN_PARITY_SHIFT         3
+
+#define RFCOMM_ODD_PARITY               0x00
+#define RFCOMM_EVEN_PARITY              0x01
+#define RFCOMM_MARK_PARITY              0x02
+#define RFCOMM_SPACE_PARITY             0x03
+
+#define RFCOMM_RPN_PARITY_TYPE_MASK     0x03
+#define RFCOMM_RPN_PARITY_TYPE_SHIFT    4
+
+#define RFCOMM_FC_OFF                   0x00
+#define RFCOMM_FC_XONXOFF_ON_INPUT      0x01
+#define RFCOMM_FC_XONXOFF_ON_OUTPUT     0x02
+#define RFCOMM_FC_RTR_ON_INPUT          0x04
+#define RFCOMM_FC_RTR_ON_OUTPUT         0x08
+#define RFCOMM_FC_RTC_ON_INPUT          0x10
+#define RFCOMM_FC_RTC_ON_OUTPUT         0x20
+#define RFCOMM_FC_MASK                  0x3F
+
+#define RFCOMM_RPN_PM_BIT_RATE          0x0001
+#define RFCOMM_RPN_PM_DATA_BITS         0x0002
+#define RFCOMM_RPN_PM_STOP_BITS         0x0004
+#define RFCOMM_RPN_PM_PARITY            0x0008
+#define RFCOMM_RPN_PM_PARITY_TYPE       0x0010
+#define RFCOMM_RPN_PM_XON_CHAR          0x0020
+#define RFCOMM_RPN_PM_XOFF_CHAR         0x0040
+#define RFCOMM_RPN_PM_XONXOFF_ON_INPUT  0x0100
+#define RFCOMM_RPN_PM_XONXOFF_ON_OUTPUT 0x0200
+#define RFCOMM_RPN_PM_RTR_ON_INPUT      0x0400
+#define RFCOMM_RPN_PM_RTR_ON_OUTPUT     0x0800
+#define RFCOMM_RPN_PM_RTC_ON_INPUT      0x1000
+#define RFCOMM_RPN_PM_RTC_ON_OUTPUT     0x2000
+#define RFCOMM_RPN_PM_MASK              0x3F7F
+
+#define RFCOMM_RLS_ERROR                0x01
+#define RFCOMM_RLS_OVERRUN              0x02
+#define RFCOMM_RLS_PARITY               0x04
+#define RFCOMM_RLS_FRAMING              0x08
+
+/* Multiplexor channel uses DLCI 0 */
+#define RFCOMM_MX_DLCI                  0
+
+/*
+** Define RFCOMM Multiplexer message types
+*/
+#define RFCOMM_MX_PN                    0x80
+#define RFCOMM_MX_PN_LEN                8
+
+#define RFCOMM_MX_CLD                   0xC0
+#define RFCOMM_MX_CLD_LEN               0
+
+#define RFCOMM_MX_TEST                  0x20
+
+#define RFCOMM_MX_FCON                  0xA0
+#define RFCOMM_MX_FCON_LEN              0
+
+#define RFCOMM_MX_FCOFF                 0x60
+#define RFCOMM_MX_FCOFF_LEN             0
+
+#define RFCOMM_MX_MSC                   0xE0
+#define RFCOMM_MX_MSC_LEN_NO_BREAK      2
+#define RFCOMM_MX_MSC_LEN_WITH_BREAK    3
+
+#define RFCOMM_MX_NSC                   0x10
+#define RFCOMM_MX_NSC_LEN               1
+
+#define RFCOMM_MX_RPN                   0x90
+#define RFCOMM_MX_RPN_REQ_LEN           1
+#define RFCOMM_MX_RPN_LEN               8
+
+#define RFCOMM_MX_RLS                   0x50
+#define RFCOMM_MX_RLS_LEN               2
+#endif
diff --git a/stack/include/sdp_api.h b/stack/include/sdp_api.h
new file mode 100644
index 0000000..dcc813e
--- /dev/null
+++ b/stack/include/sdp_api.h
@@ -0,0 +1,756 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef SDP_API_H
+#define SDP_API_H
+
+#include "bt_target.h"
+#include "sdpdefs.h"
+
+/*****************************************************************************
+**  Constants
+*****************************************************************************/
+
+/* Success code and error codes */
+#define  SDP_SUCCESS                        0x0000
+#define  SDP_INVALID_VERSION                0x0001
+#define  SDP_INVALID_SERV_REC_HDL           0x0002
+#define  SDP_INVALID_REQ_SYNTAX             0x0003
+#define  SDP_INVALID_PDU_SIZE               0x0004
+#define  SDP_INVALID_CONT_STATE             0x0005
+#define  SDP_NO_RESOURCES                   0x0006
+#define  SDP_DI_REG_FAILED                  0x0007
+#define  SDP_DI_DISC_FAILED                 0x0008
+#define  SDP_NO_DI_RECORD_FOUND             0x0009
+#define  SDP_ERR_ATTR_NOT_PRESENT           0x000A
+#define  SDP_ILLEGAL_PARAMETER              0x000B
+
+#define  SDP_NO_RECS_MATCH                  0xFFF0
+#define  SDP_CONN_FAILED                    0xFFF1
+#define  SDP_CFG_FAILED                     0xFFF2
+#define  SDP_GENERIC_ERROR                  0xFFF3
+#define  SDP_DB_FULL                        0xFFF4
+#define  SDP_INVALID_PDU                    0xFFF5
+#define  SDP_SECURITY_ERR                   0xFFF6
+#define  SDP_CONN_REJECTED                  0xFFF7
+#define  SDP_CANCEL                         0xFFF8
+
+/* these result codes are used only when SDP_FOR_JV_INCLUDED==TRUE */
+#define  SDP_EVT_OPEN                       0x00F0 /* connected */
+#define  SDP_EVT_DATA_IND                   0x00F1 /* data ind */
+#define  SDP_EVT_CLOSE                      0x00F2 /* disconnected */
+
+/* Define the PSM that SDP uses */
+#define SDP_PSM     0x0001
+
+/* Legacy #define to avoid code changes - SDP UUID is same as BT UUID */
+#define tSDP_UUID   tBT_UUID
+
+/* Masks for attr_value field of tSDP_DISC_ATTR */
+#define SDP_DISC_ATTR_LEN_MASK          0x0FFF
+#define SDP_DISC_ATTR_TYPE(len_type)    (len_type >> 12)
+#define SDP_DISC_ATTR_LEN(len_type)     (len_type & SDP_DISC_ATTR_LEN_MASK)
+
+/* Maximum number of protocol list items (list_elem in tSDP_PROTOCOL_ELEM) */
+#define SDP_MAX_LIST_ELEMS      3
+
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* Define a callback function for when discovery is complete. */
+typedef void (tSDP_DISC_CMPL_CB) (UINT16 result);
+typedef void (tSDP_DISC_CMPL_CB2) (UINT16 result, void* user_data);
+
+typedef struct
+{
+    BD_ADDR         peer_addr;
+    UINT16          peer_mtu;
+} tSDP_DR_OPEN;
+
+typedef struct
+{
+    UINT8           *p_data;
+    UINT16          data_len;
+} tSDP_DR_DATA;
+
+typedef union
+{
+    tSDP_DR_OPEN    open;
+    tSDP_DR_DATA    data;
+} tSDP_DATA;
+
+/* Define a callback function for when discovery result is received. */
+typedef void (tSDP_DISC_RES_CB) (UINT16 event, tSDP_DATA *p_data);
+
+/* Define a structure to hold the discovered service information. */
+typedef struct
+{
+    union
+    {
+        UINT8       u8;                         /* 8-bit integer            */
+        UINT16      u16;                        /* 16-bit integer           */
+        UINT32      u32;                        /* 32-bit integer           */
+        UINT8       array[4];                   /* Variable length field    */
+        struct t_sdp_disc_attr *p_sub_attr;     /* Addr of first sub-attr (list)*/
+    } v;
+
+} tSDP_DISC_ATVAL;
+
+typedef struct t_sdp_disc_attr
+{
+    struct t_sdp_disc_attr *p_next_attr;        /* Addr of next linked attr     */
+    UINT16                  attr_id;            /* Attribute ID                 */
+    UINT16                  attr_len_type;      /* Length and type fields       */
+    tSDP_DISC_ATVAL         attr_value;         /* Variable length entry data   */
+} tSDP_DISC_ATTR;
+
+typedef struct t_sdp_disc_rec
+{
+    tSDP_DISC_ATTR          *p_first_attr;      /* First attribute of record    */
+    struct t_sdp_disc_rec   *p_next_rec;        /* Addr of next linked record   */
+    UINT32                  time_read;          /* The time the record was read */
+    BD_ADDR                 remote_bd_addr;     /* Remote BD address            */
+} tSDP_DISC_REC;
+
+typedef struct
+{
+    UINT32          mem_size;                   /* Memory size of the DB        */
+    UINT32          mem_free;                   /* Memory still available       */
+    tSDP_DISC_REC   *p_first_rec;               /* Addr of first record in DB   */
+    UINT16          num_uuid_filters;           /* Number of UUIds to filter    */
+    tSDP_UUID       uuid_filters[SDP_MAX_UUID_FILTERS]; /* UUIDs to filter      */
+    UINT16          num_attr_filters;           /* Number of attribute filters  */
+    UINT16          attr_filters[SDP_MAX_ATTR_FILTERS]; /* Attributes to filter */
+    UINT8           *p_free_mem;                /* Pointer to free memory       */
+#if (SDP_RAW_DATA_INCLUDED == TRUE)
+    UINT8           *raw_data;                  /* Received record from server. allocated/released by client  */
+    UINT32          raw_size;                   /* size of raw_data */
+    UINT32          raw_used;                   /* length of raw_data used */
+#endif
+}tSDP_DISCOVERY_DB;
+
+/* This structure is used to add protocol lists and find protocol elements */
+typedef struct
+{
+    UINT16      protocol_uuid;
+    UINT16      num_params;
+    UINT16      params[SDP_MAX_PROTOCOL_PARAMS];
+} tSDP_PROTOCOL_ELEM;
+
+typedef struct
+{
+    UINT16              num_elems;
+    tSDP_PROTOCOL_ELEM  list_elem[SDP_MAX_LIST_ELEMS];
+} tSDP_PROTO_LIST_ELEM;
+
+/* Device Identification (DI) data structure
+*/
+/* Used to set the DI record */
+typedef struct t_sdp_di_record
+{
+    UINT16       vendor;
+    UINT16       vendor_id_source;
+    UINT16       product;
+    UINT16       version;
+    BOOLEAN      primary_record;
+    char         client_executable_url[SDP_MAX_ATTR_LEN];   /* optional */
+    char         service_description[SDP_MAX_ATTR_LEN];     /* optional */
+    char         documentation_url[SDP_MAX_ATTR_LEN];       /* optional */
+}tSDP_DI_RECORD;
+
+/* Used to get the DI record */
+typedef struct t_sdp_di_get_record
+{
+    UINT16          spec_id;
+    tSDP_DI_RECORD  rec;
+}tSDP_DI_GET_RECORD;
+
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/* API into the SDP layer for service discovery. */
+
+/*******************************************************************************
+**
+** Function         SDP_InitDiscoveryDb
+**
+** Description      This function is called to initialize a discovery database.
+**
+** Returns          TRUE if successful, FALSE if one or more parameters are bad
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_InitDiscoveryDb (tSDP_DISCOVERY_DB *p_db, UINT32 len,
+                                            UINT16 num_uuid,
+                                            tSDP_UUID *p_uuid_list,
+                                            UINT16 num_attr,
+                                            UINT16 *p_attr_list);
+
+/*******************************************************************************
+**
+** Function         SDP_CancelServiceSearch
+**
+** Description      This function cancels an active query to an SDP server.
+**
+** Returns          TRUE if discovery cancelled, FALSE if a matching activity is not found.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_CancelServiceSearch (tSDP_DISCOVERY_DB *p_db);
+
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchRequest
+**
+** Description      This function queries an SDP server for information.
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_ServiceSearchRequest (UINT8 *p_bd_addr,
+                                                 tSDP_DISCOVERY_DB *p_db,
+                                                 tSDP_DISC_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchAttributeRequest
+**
+** Description      This function queries an SDP server for information.
+**
+**                  The difference between this API function and the function
+**                  SDP_ServiceSearchRequest is that this one does a
+**                  combined ServiceSearchAttributeRequest SDP function.
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_ServiceSearchAttributeRequest (UINT8 *p_bd_addr,
+                                                          tSDP_DISCOVERY_DB *p_db,
+                                                          tSDP_DISC_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchAttributeRequest2
+**
+** Description      This function queries an SDP server for information.
+**
+**                  The difference between this API function and the function
+**                  SDP_ServiceSearchRequest is that this one does a
+**                  combined ServiceSearchAttributeRequest SDP function with the
+**                  user data piggyback
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_ServiceSearchAttributeRequest2 (UINT8 *p_bd_addr,
+                                                          tSDP_DISCOVERY_DB *p_db,
+                                                          tSDP_DISC_CMPL_CB2 *p_cb, void * user_data);
+
+/* API of utilities to find data in the local discovery database */
+
+/*******************************************************************************
+**
+** Function         SDP_FindAttributeInDb
+**
+** Description      This function queries an SDP database for a specific attribute.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to matching record, or NULL
+**
+*******************************************************************************/
+SDP_API extern tSDP_DISC_REC *SDP_FindAttributeInDb (tSDP_DISCOVERY_DB *p_db,
+                                                     UINT16 attr_id,
+                                                     tSDP_DISC_REC *p_start_rec);
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindAttributeInRec
+**
+** Description      This function searches an SDP discovery record for a
+**                  specific attribute.
+**
+** Returns          Pointer to matching attribute entry, or NULL
+**
+*******************************************************************************/
+SDP_API extern tSDP_DISC_ATTR *SDP_FindAttributeInRec (tSDP_DISC_REC *p_rec,
+                                                       UINT16 attr_id);
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceInDb
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+SDP_API extern tSDP_DISC_REC *SDP_FindServiceInDb (tSDP_DISCOVERY_DB *p_db,
+                                                   UINT16 service_uuid,
+                                                   tSDP_DISC_REC *p_start_rec);
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInDb
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** NOTE             the only difference between this function and the previous
+**                  function "SDP_FindServiceInDb()" is that this function takes
+**                  a tBT_UUID input.
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+SDP_API extern tSDP_DISC_REC *SDP_FindServiceUUIDInDb (tSDP_DISCOVERY_DB *p_db,
+                                                       tBT_UUID *p_uuid,
+                                                       tSDP_DISC_REC *p_start_rec);
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInRec_128bit
+**
+** Description      This function is called to read the 128-bit service UUID within a record
+**                  if there is any.
+**
+** Parameters:      p_rec      - pointer to a SDP record.
+**                  p_uuid     - output parameter to save the UUID found.
+**
+** Returns          TRUE if found, otherwise FALSE.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_FindServiceUUIDInRec_128bit(tSDP_DISC_REC *p_rec, tBT_UUID * p_uuid);
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceInDb_128bit
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+SDP_API extern tSDP_DISC_REC *SDP_FindServiceInDb_128bit(tSDP_DISCOVERY_DB *p_db,
+                                                       tSDP_DISC_REC *p_start_rec);
+
+/*******************************************************************************
+**
+** Function         SDP_FindProtocolListElemInRec
+**
+** Description      This function looks at a specific discovery record for a
+**                  protocol list element.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_FindProtocolListElemInRec (tSDP_DISC_REC *p_rec,
+                                                      UINT16 layer_uuid,
+                                                      tSDP_PROTOCOL_ELEM *p_elem);
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindAddProtoListsElemInRec
+**
+** Description      This function looks at a specific discovery record for a
+**                  protocol list element.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_FindAddProtoListsElemInRec (tSDP_DISC_REC *p_rec,
+                                                       UINT16 layer_uuid,
+                                                       tSDP_PROTOCOL_ELEM *p_elem);
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindProfileVersionInRec
+**
+** Description      This function looks at a specific discovery record for the
+**                  Profile list descriptor, and pulls out the version number.
+**                  The version number consists of an 8-bit major version and
+**                  an 8-bit minor version.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the major and minor version numbers that were passed
+**                  in are filled in.
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_FindProfileVersionInRec (tSDP_DISC_REC *p_rec,
+                                                    UINT16 profile_uuid,
+                                                    UINT16 *p_version);
+
+
+/* API into SDP for local service database updates */
+
+/*******************************************************************************
+**
+** Function         SDP_CreateRecord
+**
+** Description      This function is called to create a record in the database.
+**                  This would be through the SDP database maintenance API. The
+**                  record is created empty, teh application should then call
+**                  "add_attribute" to add the record's attributes.
+**
+** Returns          Record handle if OK, else 0.
+**
+*******************************************************************************/
+SDP_API extern UINT32 SDP_CreateRecord (void);
+
+
+/*******************************************************************************
+**
+** Function         SDP_DeleteRecord
+**
+** Description      This function is called to add a record (or all records)
+**                  from the database. This would be through the SDP database
+**                  maintenance API.
+**
+**                  If a record handle of 0 is passed, all records are deleted.
+**
+** Returns          TRUE if succeeded, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_DeleteRecord (UINT32 handle);
+
+
+/*******************************************************************************
+**
+** Function         SDP_ReadRecord
+**
+** Description      This function is called to get the raw data of the record
+**                  with the given handle from the database.
+**
+** Returns          -1, if the record is not found.
+**                  Otherwise, the offset (0 or 1) to start of data in p_data.
+**
+**                  The size of data copied into p_data is in *p_data_len.
+**
+*******************************************************************************/
+SDP_API extern INT32 SDP_ReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len);
+
+/*******************************************************************************
+**
+** Function         SDP_AddAttribute
+**
+** Description      This function is called to add an attribute to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the attribute already exists in the record, it is replaced
+**                  with the new value.
+**
+** NOTE             Attribute values must be passed as a Big Endian stream.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddAttribute (UINT32 handle, UINT16 attr_id,
+                                         UINT8 attr_type, UINT32 attr_len,
+                                         UINT8 *p_val);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddSequence
+**
+** Description      This function is called to add a sequence to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the sequence already exists in the record, it is replaced
+**                  with the new sequence.
+**
+** NOTE             Element values must be passed as a Big Endian stream.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddSequence (UINT32 handle,  UINT16 attr_id,
+                                        UINT16 num_elem, UINT8 type[],
+                                        UINT8 len[], UINT8 *p_val[]);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddUuidSequence
+**
+** Description      This function is called to add a UUID sequence to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the sequence already exists in the record, it is replaced
+**                  with the new sequence.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddUuidSequence (UINT32 handle,  UINT16 attr_id,
+                                            UINT16 num_uuids, UINT16 *p_uuids);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddProtocolList
+**
+** Description      This function is called to add a protocol descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the protocol list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddProtocolList (UINT32 handle, UINT16 num_elem,
+                                            tSDP_PROTOCOL_ELEM *p_elem_list);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddAdditionProtoLists
+**
+** Description      This function is called to add a protocol descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the protocol list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddAdditionProtoLists (UINT32 handle, UINT16 num_elem,
+                                                  tSDP_PROTO_LIST_ELEM *p_proto_list);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddProfileDescriptorList
+**
+** Description      This function is called to add a profile descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the version already exists in the record, it is replaced
+**                  with the new one.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddProfileDescriptorList (UINT32 handle,
+                                                     UINT16 profile_uuid,
+                                                     UINT16 version);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddLanguageBaseAttrIDList
+**
+** Description      This function is called to add a language base attr list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the version already exists in the record, it is replaced
+**                  with the new one.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddLanguageBaseAttrIDList (UINT32 handle,
+                                                      UINT16 lang, UINT16 char_enc,
+                                                      UINT16 base_id);
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddServiceClassIdList
+**
+** Description      This function is called to add a service list to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the service list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_AddServiceClassIdList (UINT32 handle,
+                                                  UINT16 num_services,
+                                                  UINT16 *p_service_uuids);
+
+
+/*******************************************************************************
+**
+** Function         SDP_DeleteAttribute
+**
+** Description      This function is called to delete an attribute from a record.
+**                  This would be through the SDP database maintenance API.
+**
+** Returns          TRUE if deleted OK, else FALSE if not found
+**
+*******************************************************************************/
+SDP_API extern BOOLEAN SDP_DeleteAttribute (UINT32 handle, UINT16 attr_id);
+
+
+/* Device Identification APIs */
+
+/*******************************************************************************
+**
+** Function         SDP_SetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+** Returns          Returns SDP_SUCCESS if record added successfully, else error
+**
+*******************************************************************************/
+SDP_API extern UINT16 SDP_SetLocalDiRecord (tSDP_DI_RECORD *device_info,
+                                            UINT32 *p_handle);
+
+/*******************************************************************************
+**
+** Function         SDP_GetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+**                  Fills in the device information of the record
+**                  p_handle - if p_handle == NULL, the primary record is returned
+**
+** Returns          Returns SDP_SUCCESS if record exists, else error
+**
+*******************************************************************************/
+SDP_API extern UINT16 SDP_GetLocalDiRecord(tSDP_DI_GET_RECORD *p_device_info,
+                                           UINT32 *p_handle );
+
+/*******************************************************************************
+**
+** Function         SDP_DiDiscover
+**
+** Description      This function queries a remote device for DI information.
+**
+** Returns          SDP_SUCCESS if query started successfully, else error
+**
+*******************************************************************************/
+SDP_API extern UINT16 SDP_DiDiscover (BD_ADDR remote_device,
+                                      tSDP_DISCOVERY_DB *p_db, UINT32 len,
+                                      tSDP_DISC_CMPL_CB *p_cb);
+
+
+/*******************************************************************************
+**
+** Function         SDP_GetNumDiRecords
+**
+** Description      Searches specified database for DI records
+**
+** Returns          number of DI records found
+**
+*******************************************************************************/
+SDP_API extern UINT8  SDP_GetNumDiRecords (tSDP_DISCOVERY_DB *p_db);
+
+
+/*******************************************************************************
+**
+** Function         SDP_GetDiRecord
+**
+** Description      This function retrieves a remote device's DI record from
+**                  the specified database.
+**
+** Returns          SDP_SUCCESS if record retrieved, else error
+**
+*******************************************************************************/
+SDP_API extern UINT16 SDP_GetDiRecord (UINT8 getRecordIndex,
+                                       tSDP_DI_GET_RECORD *device_info,
+                                       tSDP_DISCOVERY_DB *p_db);
+
+
+/*******************************************************************************
+**
+** Function         SDP_SetTraceLevel
+**
+** Description      This function sets the trace level for SDP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+SDP_API extern UINT8 SDP_SetTraceLevel (UINT8 new_level);
+
+/*******************************************************************************
+**
+** Function         SDP_ConnOpen
+**
+** Description      This function creates a connection to the SDP server on the
+**                  given device.
+**
+** Returns          0, if failed to initiate connection. Otherwise, the handle.
+**
+*******************************************************************************/
+SDP_API UINT32 SDP_ConnOpen (UINT8 *p_bd_addr, tSDP_DISC_RES_CB *p_rcb,
+                                  tSDP_DISC_CMPL_CB *p_cb);
+
+/*******************************************************************************
+**
+** Function         SDP_WriteData
+**
+** Description      This function sends data to the connected SDP server.
+**
+** Returns          TRUE if data is sent, FALSE if failed.
+**
+*******************************************************************************/
+SDP_API BOOLEAN SDP_WriteData (UINT32 handle, BT_HDR  *p_msg);
+
+/*******************************************************************************
+**
+** Function         SDP_ConnClose
+**
+** Description      This function is called to close a SDP connection.
+**
+** Parameters:      handle      - Handle of the connection returned by SDP_ConnOpen
+**
+** Returns          TRUE if connection is closed, FALSE if failed to find the handle.
+**
+*******************************************************************************/
+SDP_API BOOLEAN SDP_ConnClose (UINT32 handle);
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInRec
+**
+** Description      This function is called to read the service UUID within a record
+**                  if there is any.
+**
+** Parameters:      p_rec      - pointer to a SDP record.
+**
+** Returns          TRUE if found, otherwise FALSE.
+**
+*******************************************************************************/
+SDP_API BOOLEAN SDP_FindServiceUUIDInRec(tSDP_DISC_REC *p_rec, tBT_UUID *p_uuid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* SDP_API_H */
diff --git a/stack/include/sdpdefs.h b/stack/include/sdpdefs.h
new file mode 100644
index 0000000..c290e03
--- /dev/null
+++ b/stack/include/sdpdefs.h
@@ -0,0 +1,319 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the definitions for the SDP API
+ *
+ ******************************************************************************/
+
+#ifndef SDP_DEFS_H
+#define SDP_DEFS_H
+
+/* Define the service attribute IDs.
+*/
+#define  ATTR_ID_SERVICE_RECORD_HDL             0x0000
+#define  ATTR_ID_SERVICE_CLASS_ID_LIST          0x0001
+#define  ATTR_ID_SERVICE_RECORD_STATE           0x0002
+#define  ATTR_ID_SERVICE_ID                     0x0003
+#define  ATTR_ID_PROTOCOL_DESC_LIST             0x0004
+#define  ATTR_ID_BROWSE_GROUP_LIST              0x0005
+#define  ATTR_ID_LANGUAGE_BASE_ATTR_ID_LIST     0x0006
+#define  ATTR_ID_SERVICE_INFO_TIME_TO_LIVE      0x0007
+#define  ATTR_ID_SERVICE_AVAILABILITY           0x0008
+#define  ATTR_ID_BT_PROFILE_DESC_LIST           0x0009
+#define  ATTR_ID_DOCUMENTATION_URL              0x000A
+#define  ATTR_ID_CLIENT_EXE_URL                 0x000B
+#define  ATTR_ID_ICON_URL                       0x000C
+#define  ATTR_ID_ADDITION_PROTO_DESC_LISTS      0x000D
+
+#define  LANGUAGE_BASE_ID                       0x0100
+#define  ATTR_ID_SERVICE_NAME                   LANGUAGE_BASE_ID + 0x0000
+#define  ATTR_ID_SERVICE_DESCRIPTION            LANGUAGE_BASE_ID + 0x0001
+#define  ATTR_ID_PROVIDER_NAME                  LANGUAGE_BASE_ID + 0x0002
+
+/* Device Identification (DI)
+*/
+#define ATTR_ID_SPECIFICATION_ID                0x0200
+#define ATTR_ID_VENDOR_ID                       0x0201
+#define ATTR_ID_PRODUCT_ID                      0x0202
+#define ATTR_ID_PRODUCT_VERSION                 0x0203
+#define ATTR_ID_PRIMARY_RECORD                  0x0204
+#define ATTR_ID_VENDOR_ID_SOURCE                0x0205
+
+#define BLUETOOTH_DI_SPECIFICATION              0x0103  /* 1.3 */
+#define DI_VENDOR_ID_DEFAULT                    0xFFFF
+#define DI_VENDOR_ID_SOURCE_BTSIG               0x0001
+#define DI_VENDOR_ID_SOURCE_USBIF               0x0002
+
+
+#define  ATTR_ID_IP_SUBNET                      0x0200 /* PAN Profile (***) */
+#define  ATTR_ID_VERSION_NUMBER_LIST            0x0200
+#define  ATTR_ID_GROUP_ID                       0x0200
+#define  ATTR_ID_SERVICE_DATABASE_STATE         0x0201
+#define  ATTR_ID_SERVICE_VERSION                0x0300
+#define  ATTR_ID_HCRP_1284ID                    0x0300
+
+#define  ATTR_ID_SUPPORTED_DATA_STORES          0x0301
+#define  ATTR_ID_NETWORK				        0x0301
+#define  ATTR_ID_EXTERNAL_NETWORK               0x0301
+#define  ATTR_ID_FAX_CLASS_1_SUPPORT            0x0302
+#define  ATTR_ID_REMOTE_AUDIO_VOLUME_CONTROL    0x0302
+#define  ATTR_ID_DEVICE_NAME                    0x0302
+#define  ATTR_ID_SUPPORTED_FORMATS_LIST         0x0303
+#define  ATTR_ID_FAX_CLASS_2_0_SUPPORT          0x0303
+#define  ATTR_ID_FAX_CLASS_2_SUPPORT            0x0304
+#define  ATTR_ID_FRIENDLY_NAME                  0x0304
+#define  ATTR_ID_AUDIO_FEEDBACK_SUPPORT         0x0305
+#define  ATTR_ID_NETWORK_ADDRESS                0x0306
+#define  ATTR_ID_DEVICE_LOCATION                0x0306
+#define  ATTR_ID_WAP_GATEWAY                    0x0307
+#define  ATTR_ID_HOME_PAGE_URL                  0x0308
+#define  ATTR_ID_WAP_STACK_TYPE                 0x0309
+#define  ATTR_ID_IMG_SUPPORTED_CAPABILITIES     0x0310 /* Imaging Profile */
+#define  ATTR_ID_SUPPORTED_FEATURES             0x0311 /* HFP, BIP */
+#define  ATTR_ID_IMG_SUPPORTED_FUNCTIONS        0x0312 /* Imaging Profile */
+#define  ATTR_ID_IMG_TOT_DATA_CAPABILITY        0x0313 /* Imaging Profile */
+#define  ATTR_ID_SUPPORTED_REPOSITORIES         0x0314 /* Phone book access Profile */
+#define  ATTR_ID_MAS_INSTANCE_ID                0x0315 /* MAP profile */
+#define  ATTR_ID_SUPPORTED_MSG_TYPE             0x0316 /* MAP profile */
+
+/* These values are for the BPP profile */
+#define ATTR_ID_DOCUMENT_FORMATS_SUPPORTED      0x0350
+#define ATTR_ID_CHARACTER_REPERTOIRES_SUPPORTED 0x0352
+#define ATTR_ID_XHTML_IMAGE_FORMATS_SUPPORTED   0x0354
+#define ATTR_ID_COLOR_SUPPORTED                 0x0356
+#define ATTR_ID_1284ID                          0x0358
+#define ATTR_ID_PRINTER_NAME                    0x035A
+#define ATTR_ID_PRINTER_LOCATION                0x035C
+#define ATTR_ID_DUPLEX_SUPPORTED                0x035E
+#define ATTR_ID_MEDIA_TYPES_SUPPORTED           0x0360
+#define ATTR_ID_MAX_MEDIA_WIDTH                 0x0362
+#define ATTR_ID_MAX_MEDIA_LENGTH                0x0364
+#define ATTR_ID_ENHANCED_LAYOUT_SUPPORTED       0x0366
+#define ATTR_ID_RUI_FORMATS_SUPPORTED           0x0368
+#define ATTR_ID_RUI_REF_PRINTING_SUPPORTED      0x0370  /* Boolean */
+#define ATTR_ID_RUI_DIRECT_PRINTING_SUPPORTED   0x0372  /* Boolean */
+#define ATTR_ID_REF_PRINTING_TOP_URL            0x0374
+#define ATTR_ID_DIRECT_PRINTING_TOP_URL         0x0376
+#define ATTR_ID_PRINTER_ADMIN_RUI_TOP_URL       0x0378
+#define ATTR_ID_BPP_DEVICE_NAME                 0x037A
+
+/* These values are for the PAN profile */
+#define  ATTR_ID_SECURITY_DESCRIPTION           0x030A
+#define  ATTR_ID_NET_ACCESS_TYPE                0x030B
+#define  ATTR_ID_MAX_NET_ACCESS_RATE            0x030C
+#define  ATTR_ID_IPV4_SUBNET                    0x030D
+#define  ATTR_ID_IPV6_SUBNET                    0x030E
+#define  ATTR_ID_PAN_SECURITY                   0x0400
+
+/* These values are for HID profile */
+#define  ATTR_ID_HID_DEVICE_RELNUM          0x0200
+#define  ATTR_ID_HID_PARSER_VERSION         0x0201
+#define  ATTR_ID_HID_DEVICE_SUBCLASS        0x0202
+#define  ATTR_ID_HID_COUNTRY_CODE           0x0203
+#define  ATTR_ID_HID_VIRTUAL_CABLE          0x0204
+#define  ATTR_ID_HID_RECONNECT_INITIATE     0x0205
+#define  ATTR_ID_HID_DESCRIPTOR_LIST        0x0206
+#define  ATTR_ID_HID_LANGUAGE_ID_BASE       0x0207
+#define  ATTR_ID_HID_SDP_DISABLE            0x0208
+#define  ATTR_ID_HID_BATTERY_POWER          0x0209
+#define  ATTR_ID_HID_REMOTE_WAKE            0x020A
+#define  ATTR_ID_HID_PROFILE_VERSION        0x020B
+#define  ATTR_ID_HID_LINK_SUPERVISION_TO    0x020C
+#define  ATTR_ID_HID_NORMALLY_CONNECTABLE   0x020D
+#define  ATTR_ID_HID_BOOT_DEVICE            0x020E
+#define  ATTR_ID_HID_SSR_HOST_MAX_LAT       0x020F
+#define  ATTR_ID_HID_SSR_HOST_MIN_TOUT      0x0210
+
+/* These values are for the HDP profile */
+#define  ATTR_ID_HDP_SUP_FEAT_LIST          0x0200  /* Supported features list */
+#define  ATTR_ID_HDP_DATA_EXCH_SPEC         0x0301  /* Data exchange specification */
+#define  ATTR_ID_HDP_MCAP_SUP_PROC          0x0302  /* MCAP supported procedures */
+
+/* a temporary value for IOP */
+#ifndef ATTR_ID_OBX_OVR_L2CAP_PSM
+#define  ATTR_ID_OBX_OVR_L2CAP_PSM          0x0200
+#endif
+
+
+/* Define common 16-bit protocol UUIDs
+*/
+#define UUID_PROTOCOL_SDP                    0x0001
+#define UUID_PROTOCOL_UDP                    0x0002
+#define UUID_PROTOCOL_RFCOMM                 0x0003
+#define UUID_PROTOCOL_TCP                    0x0004
+#define UUID_PROTOCOL_TCS_BIN                0x0005
+#define UUID_PROTOCOL_TCS_AT                 0x0006
+#define UUID_PROTOCOL_OBEX                   0x0008
+#define UUID_PROTOCOL_IP                     0x0009
+#define UUID_PROTOCOL_FTP                    0x000A
+#define UUID_PROTOCOL_HTTP                   0x000C
+#define UUID_PROTOCOL_WSP                    0x000E
+#define UUID_PROTOCOL_BNEP                   0x000F
+#define UUID_PROTOCOL_UPNP                   0x0010
+#define UUID_PROTOCOL_HIDP                   0x0011
+#define UUID_PROTOCOL_HCRP_CTRL              0x0012
+#define UUID_PROTOCOL_HCRP_DATA              0x0014
+#define UUID_PROTOCOL_HCRP_NOTIF             0x0016
+#define UUID_PROTOCOL_AVCTP                  0x0017
+#define UUID_PROTOCOL_AVDTP                  0x0019
+#define UUID_PROTOCOL_CMTP                   0x001B
+#define UUID_PROTOCOL_UDI                    0x001D
+#define UUID_PROTOCOL_MCAP_CTRL              0x001E
+#define UUID_PROTOCOL_MCAP_DATA              0x001F
+#define UUID_PROTOCOL_L2CAP                  0x0100
+#define UUID_PROTOCOL_ATT                    0x0007
+
+/* Define common 16-bit service class UUIDs
+*/
+#define UUID_SERVCLASS_SERVICE_DISCOVERY_SERVER 0X1000
+#define UUID_SERVCLASS_BROWSE_GROUP_DESCRIPTOR  0X1001
+#define UUID_SERVCLASS_PUBLIC_BROWSE_GROUP      0X1002
+#define UUID_SERVCLASS_SERIAL_PORT              0X1101
+#define UUID_SERVCLASS_LAN_ACCESS_USING_PPP     0X1102
+#define UUID_SERVCLASS_DIALUP_NETWORKING        0X1103
+#define UUID_SERVCLASS_IRMC_SYNC                0X1104
+#define UUID_SERVCLASS_OBEX_OBJECT_PUSH         0X1105
+#define UUID_SERVCLASS_OBEX_FILE_TRANSFER       0X1106
+#define UUID_SERVCLASS_IRMC_SYNC_COMMAND        0X1107
+#define UUID_SERVCLASS_HEADSET                  0X1108
+#define UUID_SERVCLASS_CORDLESS_TELEPHONY       0X1109
+#define UUID_SERVCLASS_AUDIO_SOURCE             0X110A
+#define UUID_SERVCLASS_AUDIO_SINK               0X110B
+#define UUID_SERVCLASS_AV_REM_CTRL_TARGET       0X110C  /* Audio/Video Control profile */
+#define UUID_SERVCLASS_ADV_AUDIO_DISTRIBUTION   0X110D  /* Advanced Audio Distribution profile */
+#define UUID_SERVCLASS_AV_REMOTE_CONTROL        0X110E  /* Audio/Video Control profile */
+#define UUID_SERVCLASS_AV_REM_CTRL_CONTROL      0X110F  /* Audio/Video Control profile */
+#define UUID_SERVCLASS_INTERCOM                 0X1110
+#define UUID_SERVCLASS_FAX                      0X1111
+#define UUID_SERVCLASS_HEADSET_AUDIO_GATEWAY    0X1112
+#define UUID_SERVCLASS_WAP                      0X1113
+#define UUID_SERVCLASS_WAP_CLIENT               0X1114
+#define UUID_SERVCLASS_PANU                     0X1115  /* PAN profile */
+#define UUID_SERVCLASS_NAP                      0X1116  /* PAN profile */
+#define UUID_SERVCLASS_GN                       0X1117  /* PAN profile */
+#define UUID_SERVCLASS_DIRECT_PRINTING          0X1118  /* BPP profile */
+#define UUID_SERVCLASS_REFERENCE_PRINTING       0X1119  /* BPP profile */
+#define UUID_SERVCLASS_IMAGING                  0X111A  /* Imaging profile */
+#define UUID_SERVCLASS_IMAGING_RESPONDER        0X111B  /* Imaging profile */
+#define UUID_SERVCLASS_IMAGING_AUTO_ARCHIVE     0X111C  /* Imaging profile */
+#define UUID_SERVCLASS_IMAGING_REF_OBJECTS      0X111D  /* Imaging profile */
+#define UUID_SERVCLASS_HF_HANDSFREE             0X111E  /* Handsfree profile */
+#define UUID_SERVCLASS_AG_HANDSFREE             0X111F  /* Handsfree profile */
+#define UUID_SERVCLASS_DIR_PRT_REF_OBJ_SERVICE  0X1120  /* BPP profile */
+#define UUID_SERVCLASS_REFLECTED_UI             0X1121  /* BPP profile */
+#define UUID_SERVCLASS_BASIC_PRINTING           0X1122  /* BPP profile */
+#define UUID_SERVCLASS_PRINTING_STATUS          0X1123  /* BPP profile */
+#define UUID_SERVCLASS_HUMAN_INTERFACE          0X1124  /* HID profile */
+#define UUID_SERVCLASS_CABLE_REPLACEMENT        0X1125  /* HCRP profile */
+#define UUID_SERVCLASS_HCRP_PRINT               0X1126  /* HCRP profile */
+#define UUID_SERVCLASS_HCRP_SCAN                0X1127  /* HCRP profile */
+#define UUID_SERVCLASS_COMMON_ISDN_ACCESS       0X1128  /* CAPI Message Transport Protocol*/
+#define UUID_SERVCLASS_VIDEO_CONFERENCING_GW    0X1129  /* Video Conferencing profile */
+#define UUID_SERVCLASS_UDI_MT                   0X112A  /* Unrestricted Digital Information profile */
+#define UUID_SERVCLASS_UDI_TA                   0X112B  /* Unrestricted Digital Information profile */
+#define UUID_SERVCLASS_VCP                      0X112C  /* Video Conferencing profile */
+#define UUID_SERVCLASS_SAP                      0X112D  /* SIM Access profile */
+#define UUID_SERVCLASS_PBAP_PCE                 0X112E  /* Phonebook Access - PCE */
+#define UUID_SERVCLASS_PBAP_PSE                 0X112F  /* Phonebook Access - PSE */
+#define UUID_SERVCLASS_PHONE_ACCESS             0x1130
+#define UUID_SERVCLASS_HEADSET_HS               0x1131  /* Headset - HS, from HSP v1.2 */
+#define UUID_SERVCLASS_PNP_INFORMATION          0X1200  /* Device Identification */
+#define UUID_SERVCLASS_GENERIC_NETWORKING       0X1201
+#define UUID_SERVCLASS_GENERIC_FILETRANSFER     0X1202
+#define UUID_SERVCLASS_GENERIC_AUDIO            0X1203
+#define UUID_SERVCLASS_GENERIC_TELEPHONY        0X1204
+#define UUID_SERVCLASS_UPNP_SERVICE             0X1205  /* UPNP_Service [ESDP] */
+#define UUID_SERVCLASS_UPNP_IP_SERVICE          0X1206  /* UPNP_IP_Service [ESDP] */
+#define UUID_SERVCLASS_ESDP_UPNP_IP_PAN         0X1300  /* UPNP_IP_PAN [ESDP] */
+#define UUID_SERVCLASS_ESDP_UPNP_IP_LAP         0X1301  /* UPNP_IP_LAP [ESDP] */
+#define UUID_SERVCLASS_ESDP_UPNP_IP_L2CAP       0X1302  /* UPNP_L2CAP [ESDP] */
+#define UUID_SERVCLASS_VIDEO_SOURCE             0X1303  /* Video Distribution Profile (VDP) */
+#define UUID_SERVCLASS_VIDEO_SINK               0X1304  /* Video Distribution Profile (VDP) */
+#define UUID_SERVCLASS_VIDEO_DISTRIBUTION       0X1305  /* Video Distribution Profile (VDP) */
+#define UUID_SERVCLASS_HDP_PROFILE              0X1400  /* Health Device profile (HDP) */
+#define UUID_SERVCLASS_HDP_SOURCE               0X1401  /* Health Device profile (HDP) */
+#define UUID_SERVCLASS_HDP_SINK                 0X1402  /* Health Device profile (HDP) */
+#define UUID_SERVCLASS_MAP_PROFILE              0X1134  /* MAP profile UUID */
+#define UUID_SERVCLASS_MESSAGE_ACCESS           0X1132  /* Message Access Service UUID */
+#define UUID_SERVCLASS_MESSAGE_NOTIFICATION     0X1133  /* Message Notification Service UUID */
+
+#define UUID_SERVCLASS_GAP_SERVER               0x1800
+#define UUID_SERVCLASS_GATT_SERVER              0x1801
+#define UUID_SERVCLASS_IMMEDIATE_ALERT          0x1802      /* immediate alert */
+#define UUID_SERVCLASS_LINKLOSS                 0x1803      /* Link Loss Alert */
+#define UUID_SERVCLASS_TX_POWER                 0x1804      /* TX power */
+#define UUID_SERVCLASS_CURRENT_TIME             0x1805      /* Link Loss Alert */
+#define UUID_SERVCLASS_DST_CHG                  0x1806      /* DST Time change */
+#define UUID_SERVCLASS_REF_TIME_UPD             0x1807      /* reference time update */
+#define UUID_SERVCLASS_DEVICE_INFO              0x180A      /* device info service */
+#define UUID_SERVCLASS_NWA                      0x180B      /* Network availability */
+#define UUID_SERVCLASS_PHALERT                  0x180C      /* phone alert service */
+#define UUID_SERVCLASS_GLUCOSE                  0xC000      /* Glucose Meter Service */
+#define UUID_SERVCLASS_TEST_SERVER              0x9000      /* Test Group UUID */
+
+#if (BTM_WBS_INCLUDED == TRUE )
+#define UUID_CODEC_CVSD                         0x0001   /* CVSD */
+#define UUID_CODEC_MSBC                         0x0002   /* mSBC */
+#endif
+
+/* Define all the 'Descriptor Type' values.
+*/
+#define  NULL_DESC_TYPE                     0
+#define  UINT_DESC_TYPE                     1
+#define  TWO_COMP_INT_DESC_TYPE             2
+#define  UUID_DESC_TYPE                     3
+#define  TEXT_STR_DESC_TYPE                 4
+#define  BOOLEAN_DESC_TYPE                  5
+#define  DATA_ELE_SEQ_DESC_TYPE             6
+#define  DATA_ELE_ALT_DESC_TYPE             7
+#define  URL_DESC_TYPE                      8
+
+/* Define all the "Descriptor Size" values.
+*/
+#define  SIZE_ONE_BYTE                0
+#define  SIZE_TWO_BYTES               1
+#define  SIZE_FOUR_BYTES              2
+#define  SIZE_EIGHT_BYTES             3
+#define  SIZE_SIXTEEN_BYTES           4
+#define  SIZE_IN_NEXT_BYTE            5
+#define  SIZE_IN_NEXT_WORD            6
+#define  SIZE_IN_NEXT_LONG            7
+
+/* Language Encoding Constants */
+#define LANG_ID_CODE_ENGLISH            ((UINT16) 0x656e)   /* "en" */
+#define LANG_ID_CHAR_ENCODE_UTF8        ((UINT16) 0x006a)   /* UTF-8 */
+
+/* Constants used for display purposes only.  These define ovelapping attribute values */
+#define  ATTR_ID_VERS_OR_GRP_OR_DRELNUM_OR_IPSUB_OR_SPECID  0x0200
+#define  ATTR_ID_VEND_ID_OR_SERVICE_DB_STATE_OR_PARSE_VER   0x0201
+#define  ATTR_ID_PROD_ID_OR_HID_DEV_SUBCLASS                0x0202
+#define  ATTR_ID_PROD_VER_OR_HID_COUNTRY_CODE               0x0203
+#define  ATTR_ID_PRIMARY_REC_OR_HID_VIRTUAL_CABLE           0x0204
+#define  ATTR_ID_DI_VENDOR_ID_SOURCE_OR_HID_INIT_RECONNECT  0x0205
+#define  ATTR_ID_SERV_VERS_OR_1284ID                        0x0300
+#define  ATTR_ID_DATA_STORES_OR_NETWORK                     0x0301
+#define  ATTR_ID_FAX_1_OR_AUD_VOL_OR_DEV_NAME               0x0302
+#define  ATTR_ID_FORMATS_OR_FAX_2_0                         0x0303
+#define  ATTR_ID_FAX_CLASS_2_OR_FRIENDLY_NAME               0x0304
+#define  ATTR_ID_NETADDRESS_OR_DEVLOCATION                  0x0306
+
+#endif
+
+
diff --git a/stack/include/smp_api.h b/stack/include/smp_api.h
new file mode 100644
index 0000000..bd7b131
--- /dev/null
+++ b/stack/include/smp_api.h
@@ -0,0 +1,300 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the SMP API function external definitions.
+ *
+ ******************************************************************************/
+#ifndef SMP_API_H
+#define SMP_API_H
+
+#include "bt_target.h"
+
+#define SMP_PIN_CODE_LEN_MAX    PIN_CODE_LEN
+#define SMP_PIN_CODE_LEN_MIN    6
+
+/* SMP event type */
+#define SMP_IO_CAP_REQ_EVT      1       /* IO capability request event */
+#define SMP_SEC_REQUEST_EVT     2       /* SMP pairing request */
+#define SMP_PASSKEY_NOTIF_EVT   3       /* passkey notification event */
+#define SMP_PASSKEY_REQ_EVT     4       /* passkey request event */
+#define SMP_OOB_REQ_EVT         5       /* OOB request event */
+#define SMP_COMPLT_EVT          6       /* SMP complete event */
+typedef UINT8   tSMP_EVT;
+
+
+/* pairing failure reason code */
+#define SMP_PASSKEY_ENTRY_FAIL      0x01
+#define SMP_OOB_FAIL                0x02
+#define SMP_PAIR_AUTH_FAIL          0x03
+#define SMP_CONFIRM_VALUE_ERR       0x04
+#define SMP_PAIR_NOT_SUPPORT        0x05
+#define SMP_ENC_KEY_SIZE            0x06
+#define SMP_INVALID_CMD             0x07
+#define SMP_PAIR_FAIL_UNKNOWN       0x08
+#define SMP_REPEATED_ATTEMPTS       0x09
+#define SMP_PAIR_FAILURE_MAX        SMP_REPEATED_ATTEMPTS
+/* self defined error code */
+#define SMP_PAIR_INTERNAL_ERR       0x0A
+#define SMP_UNKNOWN_IO_CAP          0x0B    /* unknown IO capability, unable to decide associatino model */
+#define SMP_INIT_FAIL               0x0C
+#define SMP_CONFIRM_FAIL            0x0D
+#define SMP_BUSY                    0x0E
+#define SMP_ENC_FAIL                0x0F
+#define SMP_STARTED                 0x10
+#define SMP_RSP_TIMEOUT             0x11
+#define SMP_DIV_NOT_AVAIL           0x12
+#define SMP_FAIL                    0x13 /* unspecified failed reason */
+#define SMP_SUCCESS                 0
+
+typedef UINT8 tSMP_STATUS;
+
+
+/* Device IO capability */
+#define SMP_IO_CAP_OUT      BTM_IO_CAP_OUT   /* DisplayOnly */
+#define SMP_IO_CAP_IO       BTM_IO_CAP_IO   /* DisplayYesNo */
+#define SMP_IO_CAP_IN       BTM_IO_CAP_IN   /* KeyboardOnly */
+#define SMP_IO_CAP_NONE     BTM_IO_CAP_NONE   /* NoInputNoOutput */
+#define SMP_IO_CAP_KBDISP   BTM_IO_CAP_KBDISP   /* Keyboard Display */
+#define SMP_IO_CAP_MAX      BTM_IO_CAP_MAX
+typedef UINT8  tSMP_IO_CAP;
+
+#ifndef SMP_DEFAULT_IO_CAPS
+    #define SMP_DEFAULT_IO_CAPS     SMP_IO_CAP_KBDISP
+#endif
+
+/* OOB data present or not */
+enum
+{
+    SMP_OOB_NONE,
+    SMP_OOB_PRESENT,
+    SMP_OOB_UNKNOWN
+};
+typedef UINT8  tSMP_OOB_FLAG;
+
+#define SMP_AUTH_NO_BOND        0x00
+#define SMP_AUTH_GEN_BOND       0x01 //todo sdh change GEN_BOND to BOND
+
+/* SMP Authentication requirement */
+#define SMP_AUTH_YN_BIT           (1 << 2)
+#define SMP_AUTH_MASK           (SMP_AUTH_GEN_BOND|SMP_AUTH_YN_BIT)
+
+
+#define SMP_AUTH_BOND           SMP_AUTH_GEN_BOND
+
+#define SMP_AUTH_NB_ENC_ONLY    0x00 //(SMP_AUTH_MASK | BTM_AUTH_SP_NO)   /* no MITM, No Bonding, Encryptino only */
+#define SMP_AUTH_NB_IOCAP       (SMP_AUTH_NO_BOND | SMP_AUTH_YN_BIT)   /* MITM, No Bonding, Use IO Capability
+                                        to detrermine authenticaion procedure */
+#define SMP_AUTH_GB_ENC_ONLY    (SMP_AUTH_GEN_BOND )   /* no MITM, General Bonding, Encryptino only */
+#define SMP_AUTH_GB_IOCAP       (SMP_AUTH_GEN_BOND | SMP_AUTH_YN_BIT)  /* MITM, General Bonding, Use IO Capability
+                                        to detrermine authenticaion procedure   */
+typedef UINT8 tSMP_AUTH_REQ;
+
+#define SMP_SEC_NONE                 0
+#define SMP_SEC_UNAUTHENTICATE      (1 << 0)
+#define SMP_SEC_AUTHENTICATED       (1 << 2)
+typedef UINT8 tSMP_SEC_LEVEL;
+
+/* SMP key types */
+#define SMP_SEC_KEY_TYPE_ENC                (1 << 0)    /* encryption key */
+#define SMP_SEC_KEY_TYPE_ID                 (1 << 1)    /* identity key */
+#define SMP_SEC_KEY_TYPE_CSRK               (1 << 2)    /* slave CSRK */
+typedef UINT8 tSMP_KEYS;
+
+/* default security key distribution value */
+#define SMP_SEC_DEFAULT_KEY                  (SMP_SEC_KEY_TYPE_ENC | SMP_SEC_KEY_TYPE_ID | SMP_SEC_KEY_TYPE_CSRK)
+
+/* data type for BTM_SP_IO_REQ_EVT */
+typedef struct
+{
+    tSMP_IO_CAP     io_cap;         /* local IO capabilities */
+    tSMP_OOB_FLAG   oob_data;       /* OOB data present (locally) for the peer device */
+    tSMP_AUTH_REQ   auth_req;       /* Authentication required (for local device) */
+    UINT8           max_key_size;   /* max encryption key size */
+    tSMP_KEYS       init_keys;      /* initiator keys to be distributed */
+    tSMP_KEYS       resp_keys;      /* responder keys */
+} tSMP_IO_REQ;
+
+typedef struct
+{
+    UINT8       reason;
+    UINT8       sec_level;
+    BOOLEAN     is_pair_cancel;
+} tSMP_CMPL;
+
+typedef union
+{
+    UINT32          passkey;
+    tSMP_IO_REQ     io_req;     /* IO request */
+    tSMP_CMPL       cmplt;
+
+}tSMP_EVT_DATA;
+
+
+/* AES Encryption output */
+typedef struct
+{
+    UINT8   status;
+    UINT8   param_len;
+    UINT16  opcode;
+    UINT8   param_buf[BT_OCTET16_LEN];
+} tSMP_ENC;
+
+/* Simple Pairing Events.  Called by the stack when Simple Pairing related
+** events occur.
+*/
+typedef UINT8 (tSMP_CALLBACK) (tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data);
+
+/* callback function for CMAC algorithm
+*/
+typedef void (tCMAC_CMPL_CBACK)(UINT8 *p_mac, UINT16 tlen, UINT32 sign_counter);
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* API of SMP */
+
+/*******************************************************************************
+**
+** Function         SMP_Init
+**
+** Description      This function initializes the SMP unit.
+**
+** Returns          void
+**
+*******************************************************************************/
+    SMP_API extern void SMP_Init(void);
+
+/*******************************************************************************
+**
+** Function         SMP_SetTraceLevel
+**
+** Description      This function sets the trace level for SMP.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+    SMP_API extern UINT8 SMP_SetTraceLevel (UINT8 new_level);
+
+/*******************************************************************************
+**
+** Function         SMP_Register
+**
+** Description      This function register for the SMP service callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+    SMP_API extern BOOLEAN SMP_Register (tSMP_CALLBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         SMP_Pair
+**
+** Description      This function is called to start a SMP pairing.
+**
+** Returns          SMP_STARTED if bond started, else otherwise exception.
+**
+*******************************************************************************/
+    SMP_API extern tSMP_STATUS SMP_Pair (BD_ADDR bd_addr);
+/*******************************************************************************
+**
+** Function         SMP_PairCancel
+**
+** Description      This function is called to cancel a SMP pairing.
+**
+** Returns          TRUE - pairing cancelled
+**
+*******************************************************************************/
+    SMP_API extern  BOOLEAN SMP_PairCancel (BD_ADDR bd_addr);
+
+/*******************************************************************************
+**
+** Function         SMP_SecurityGrant
+**
+** Description      This function is called to grant security process.
+**
+** Parameters       bd_addr - peer device bd address.
+**                  res     - result of the operation SMP_SUCCESS if success.
+**                            Otherwise, SMP_REPEATED_ATTEMPTS is too many attempts.
+**
+** Returns          None
+**
+*******************************************************************************/
+    SMP_API extern void SMP_SecurityGrant(BD_ADDR bd_addr, UINT8 res);
+
+/*******************************************************************************
+**
+** Function         SMP_PasskeyReply
+**
+** Description      This function is called after Security Manager submitted
+**                  Passkey request to the application.
+**
+** Parameters:      bd_addr      - Address of the device for which PIN was requested
+**                  res          - result of the operation BTM_SUCCESS if success
+**                  passkey      - numeric value in the range of
+**                  BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
+**
+*******************************************************************************/
+    SMP_API extern void SMP_PasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey);
+
+/*******************************************************************************
+**
+** Function         SMP_OobDataReply
+**
+** Description      This function is called to provide the OOB data for
+**                  Simple Pairing in response to BTM_SP_RMT_OOB_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  res         - result of the operation SMP_SUCCESS if success
+**                  p_data      - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+    SMP_API extern void SMP_OobDataReply(BD_ADDR bd_addr, tSMP_STATUS res, UINT8 len,
+                                         UINT8 *p_data);
+
+/*******************************************************************************
+**
+** Function         SMP_Encrypt
+**
+** Description      This function is called to encrypt the data with the specified
+**                  key
+**
+** Parameters:      key                 - Pointer to key key[0] conatins the MSB
+**                  key_len             - key length
+**                  plain_text          - Pointer to data to be encrypted
+**                                        plain_text[0] conatins the MSB
+**                  pt_len              - plain text length
+**                  p_out               - pointer to the encrypted outputs
+**
+**  Returns         Boolean - TRUE: encryption is successful
+*******************************************************************************/
+    SMP_API extern BOOLEAN SMP_Encrypt (UINT8 *key, UINT8 key_len,
+                                        UINT8 *plain_text, UINT8 pt_len,
+                                        tSMP_ENC *p_out);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* SMP_API_H */
diff --git a/stack/include/uipc_msg.h b/stack/include/uipc_msg.h
new file mode 100644
index 0000000..6a9a4ae
--- /dev/null
+++ b/stack/include/uipc_msg.h
@@ -0,0 +1,884 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains sync message over UIPC
+ *
+ ******************************************************************************/
+
+#ifndef UIPC_MSG_H
+#define UIPC_MSG_H
+
+#include "bt_types.h"
+
+/****************************************************************************/
+/*                            UIPC version number: 1.0                      */
+/****************************************************************************/
+#define UIPC_VERSION_MAJOR  0x0001
+#define UIPC_VERSION_MINOR  0x0000
+
+
+/********************************
+
+    UIPC Management Messages
+
+********************************/
+
+/* tUIPC_STATUS codes*/
+enum
+{
+    UIPC_STATUS_SUCCESS,
+    UIPC_STATUS_FAIL
+};
+typedef UINT8 tUIPC_STATUS;
+
+/* op_code */
+#define UIPC_OPEN_REQ                   0x00
+#define UIPC_OPEN_RSP                   0x01
+#define UIPC_CLOSE_REQ                  0x02
+#define UIPC_CLOSE_RSP                  0x03
+
+/* Structure of UIPC_OPEN_REQ message */
+typedef struct
+{
+    UINT8               opcode;         /* UIPC_OPEN_REQ */
+} tUIPC_OPEN_REQ;
+#define UIPC_OPEN_REQ_MSGLEN        (1)
+
+/* Structure of UIPC_OPEN_RSP message */
+typedef struct
+{
+    UINT8               opcode;         /* UIPC_OPEN_RESP */
+    tUIPC_STATUS        status;         /* UIPC_STATUS */
+    UINT16              version_major;  /* UIPC_VERSION_MAJOR */
+    UINT16              version_minor;  /* UIPC_VERSION_MINOR */
+    UINT8               num_streams;    /* Number of simultaneous streams supported by the light stack */
+} tUIPC_OPEN_RSP;
+#define UIPC_OPEN_RSP_MSGLEN        (7)
+
+/* Structure of UIPC_CLOSE_REQ message */
+typedef struct t_uipc_close_req
+{
+    UINT8               opcode;         /* UIPC_CLOSE_REQ */
+} tUIPC_CLOSE_REQ;
+#define UIPC_CLOSE_REQ_MSGLEN       (1)
+
+/* Structure of UIPC_CLOSE_RSP message, only for BTC, full stack may ignore it */
+typedef struct t_uipc_close_rsp
+{
+    UINT8               opcode;         /* UIPC_CLOSE_RSP */
+} tUIPC_CLOSE_RSP;
+#define UIPC_CLOSE_RSP_MSGLEN       (1)
+
+/* UIPC management message structures */
+typedef union
+{
+    UINT8               opcode;
+    tUIPC_OPEN_REQ      open_req;
+    tUIPC_OPEN_RSP      open_resp;
+    tUIPC_CLOSE_REQ     close_req;
+} tUIPC_MSG;
+
+#define UIPC_MGMT_MSG_MAXLEN    (sizeof(tUIPC_MSG))
+
+#define IPC_LOG_MSG_LEN  100
+typedef struct t_uipc_log_msg
+{
+    UINT32              trace_set_mask;
+    UINT8               msg[IPC_LOG_MSG_LEN];
+} tUIPC_LOG_MSG;
+#define UIPC_LOG_MSGLEN       (IPC_LOG_MSG_LEN + 4)
+
+/********************************
+
+    H5 Sync Message
+
+********************************/
+
+/* op_code */
+#define SLIP_SYNC_TO_LITE_REQ        0
+#define SLIP_SYNC_TO_LITE_RESP       1
+#define SLIP_SYNC_TO_FULL_REQ        2
+#define SLIP_SYNC_TO_FULL_RESP       3
+#define SLIP_SYNC_NOTIFY             4
+
+/* status */
+#define SLIP_SYNC_SUCCESS            0
+#define SLIP_SYNC_FAILURE            1
+
+typedef struct
+{
+    UINT8       op_code;
+    UINT8       status;
+    UINT16      acl_pkt_size;
+    UINT8       state;
+    UINT8       lp_state;           /* Low Power state */
+    UINT8       next_seqno;         /* next send seq */
+    UINT8       ack;                /* next ack seq, expected seq from peer */
+    UINT8       sent_ack;           /* last sent ack */
+    UINT8       sliding_window_size;/* window size */
+    BOOLEAN     oof_flow_control;   /* Out of Frame SW Flow Control */
+    BOOLEAN     data_integrity_type;/* Level of Data Integrity Check */
+    UINT8       rx_state;           /* rx state for incoming packet processing */
+} tSLIP_SYNC_INFO;
+
+/********************************
+
+    L2CAP Sync Message
+
+********************************/
+
+/* op_code */
+#define L2C_SYNC_TO_LITE_REQ        0
+#define L2C_SYNC_TO_LITE_RESP       1
+#define L2C_REMOVE_TO_LITE_REQ      2
+#define L2C_REMOVE_TO_LITE_RESP     3
+#define L2C_FLUSH_TO_FULL_IND       4
+
+/* status */
+#define L2C_SYNC_SUCCESS            0
+#define L2C_SYNC_FAILURE            1
+
+typedef struct t_l2c_stream_info
+{
+    UINT16  local_cid;          /* Local CID                        */
+    UINT16  remote_cid;         /* Remote CID                       */
+    UINT16  out_mtu;            /* Max MTU we will send             */
+    UINT16  handle;             /* The handle used with LM          */
+    UINT16  link_xmit_quota;    /* Num outstanding pkts allowed     */
+    BOOLEAN is_flushable;       /* TRUE if flushable channel        */
+} tL2C_STREAM_INFO;
+
+typedef struct t_l2c_sync_to_lite_req
+{
+    UINT8   op_code;                       /* L2C_SYNC_TO_LITE_REQ */
+    UINT16  light_xmit_quota;              /* Total quota for light stack    */
+    UINT16  acl_data_size;                 /* Max ACL data size across HCI transport    */
+    UINT16  non_flushable_pbf;             /* L2CAP_PKT_START_NON_FLUSHABLE if controller supports */
+                                           /* Otherwise, L2CAP_PKT_START */
+    UINT8   multi_av_data_cong_start;      /* Multi-AV queue size to start congestion */
+    UINT8   multi_av_data_cong_end;        /* Multi-AV queue size to end congestion */
+    UINT8   multi_av_data_cong_discard;    /* Multi-AV queue size to discard */
+    UINT8   num_stream;
+    tL2C_STREAM_INFO stream[BTM_SYNC_INFO_NUM_STR];
+} tL2C_SYNC_TO_LITE_REQ;
+
+typedef struct t_l2c_sync_to_lite_resp_stream
+{
+    UINT16  lcid;
+    UINT8   status;
+} tL2C_SYNC_TO_LITE_RESP_STREAM;
+
+typedef struct t_l2c_sync_to_lite_resp
+{
+    UINT8   op_code;                       /* L2C_SYNC_TO_LITE_RESP */
+    UINT16  light_xmit_unacked;            /* unacked packet more than quota in light stack    */
+    UINT8   num_stream;
+    tL2C_SYNC_TO_LITE_RESP_STREAM stream[BTM_SYNC_INFO_NUM_STR];
+} tL2C_SYNC_TO_LITE_RESP;
+
+typedef struct t_l2c_remove_to_lite_req
+{
+    UINT8   op_code;                       /* L2C_REMOVE_TO_LITE_REQ */
+    UINT16  light_xmit_quota;              /* Total quota for light stack    */
+    UINT8   num_stream;
+    UINT16  lcid[BTM_SYNC_INFO_NUM_STR];
+} tL2C_REMOVE_TO_LITE_REQ;
+
+typedef tL2C_SYNC_TO_LITE_RESP  tL2C_REMOVE_TO_LITE_RESP;
+typedef tL2C_REMOVE_TO_LITE_REQ tL2C_FLUSH_TO_FULL_IND;
+
+typedef union t_l2c_sync_msg
+{
+    UINT8                       op_code;
+    tL2C_SYNC_TO_LITE_REQ       sync_req;
+    tL2C_SYNC_TO_LITE_RESP      sync_resp;
+    tL2C_REMOVE_TO_LITE_REQ     remove_req;
+    tL2C_REMOVE_TO_LITE_RESP    remove_resp;
+    tL2C_FLUSH_TO_FULL_IND      flush_ind;
+} tL2C_SYNC_MSG;
+
+/********************************
+
+    AVDTP Sync Message
+
+********************************/
+
+/* op_code */
+#define AVDT_SYNC_TO_LITE_REQ        0
+#define AVDT_SYNC_TO_LITE_RESP       1
+#define AVDT_RESYNC_TO_LITE_REQ      2
+#define AVDT_RESYNC_TO_LITE_RESP     3
+#define AVDT_SYNC_TO_FULL_REQ        4
+#define AVDT_SYNC_TO_FULL_RESP       5
+#define AVDT_REMOVE_TO_LITE_REQ      6
+#define AVDT_REMOVE_TO_LITE_RESP     7
+#define AVDT_SYNC_TO_BTC_LITE_REQ    8
+#define AVDT_SYNC_TO_BTC_LITE_RESP   9
+
+/* status */
+#define AVDT_SYNC_SUCCESS            0
+#define AVDT_SYNC_FAILURE            1
+
+typedef struct
+{
+    UINT16  lcid;
+    UINT32  ssrc;
+} tAVDT_SYNC_TO_BTC_LITE_REQ_STREAM;
+
+typedef struct
+{
+    UINT8   opcode;                     /* AVDT_SYNC_TO_BTC_LITE_REQ */
+    UINT8   num_stream;
+    tAVDT_SYNC_TO_BTC_LITE_REQ_STREAM  stream[BTM_SYNC_INFO_NUM_STR];
+} tAVDT_SYNC_TO_BTC_LITE_REQ;
+
+typedef struct
+{
+    UINT8   opcode;                     /* AVDT_SYNC_TO_BTC_LITE_RESP */
+    UINT8   status;
+} tAVDT_SYNC_TO_BTC_LITE_RESP;
+
+typedef struct t_avdt_scb_sync_info
+{
+    UINT8   handle;         /* SCB handle */
+    BD_ADDR peer_addr;      /* BD address of peer */
+    UINT16  local_cid;      /* Local CID                        */
+    UINT16  peer_mtu;       /* L2CAP mtu of the peer device */
+    UINT8   mux_tsid_media; /* TSID for media transport session */
+    UINT16  media_seq;      /* media packet sequence number */
+} tAVDT_SCB_SYNC_INFO;
+
+typedef struct t_avdt_sync_info
+{
+    UINT8   op_code;
+    UINT8   status;
+
+    tAVDT_SCB_SYNC_INFO scb_info[BTM_SYNC_INFO_NUM_STR];
+
+} tAVDT_SYNC_INFO;
+
+typedef union t_avdt_sync_msg
+{
+    UINT8                       op_code;
+    tAVDT_SYNC_INFO             sync_info;
+    tAVDT_SYNC_TO_BTC_LITE_REQ  btc_sync_req;
+    tAVDT_SYNC_TO_BTC_LITE_RESP btc_sync_resp;
+} tAVDT_SYNC_MSG;
+
+/********************************
+
+    BTA AV Sync Message
+
+********************************/
+
+/* op_code for MM light stack */
+#define BTA_AV_SYNC_TO_LITE_REQ             0
+#define BTA_AV_SYNC_TO_LITE_RESP            1
+#define BTA_AV_STR_START_TO_LITE_REQ        2
+#define BTA_AV_STR_START_TO_LITE_RESP       3
+#define BTA_AV_STR_STOP_TO_LITE_REQ         4
+#define BTA_AV_STR_STOP_TO_LITE_RESP        5
+#define BTA_AV_STR_CLEANUP_TO_LITE_REQ      6
+#define BTA_AV_STR_CLEANUP_TO_LITE_RESP     7
+#define BTA_AV_STR_SUSPEND_TO_LITE_REQ      8
+#define BTA_AV_STR_SUSPEND_TO_LITE_RESP     9
+#define BTA_AV_SYNC_ERROR_RESP              10
+
+/* op_code for BTC light stack */
+#define A2DP_START_REQ                      11
+#define A2DP_START_RESP                     12
+#define A2DP_STOP_REQ                       13
+#define A2DP_STOP_RESP                      14
+#define A2DP_CLEANUP_REQ                    15
+#define A2DP_CLEANUP_RESP                   16
+#define A2DP_SUSPEND_REQ                    17
+#define A2DP_SUSPEND_RESP                   18
+
+#define A2DP_JITTER_DONE_IND                41  /* For BTSNK */
+
+#define AUDIO_CODEC_CONFIG_REQ              19
+#define AUDIO_CODEC_CONFIG_RESP             20
+#define AUDIO_CODEC_SET_BITRATE_REQ         21
+#define AUDIO_CODEC_FLUSH_REQ               22
+#define AUDIO_ROUTE_CONFIG_REQ              23
+#define AUDIO_ROUTE_CONFIG_RESP             24
+#define AUDIO_MIX_CONFIG_REQ                25
+#define AUDIO_MIX_CONFIG_RESP               26
+#define AUDIO_BURST_FRAMES_IND              27
+#define AUDIO_BURST_END_IND                 28
+#define AUDIO_EQ_MODE_CONFIG_REQ            29
+#define AUDIO_SCALE_CONFIG_REQ              30
+
+/* For TIVO, only applicable for I2S -> DAC */
+#define AUDIO_SUB_ROUTE_REQ                 51
+#define AUDIO_SUB_ROUTE_RESP                52
+
+typedef struct
+{
+    UINT8   opcode;     /* A2DP_START_REQ */
+    UINT16  lcid;
+    UINT16  curr_mtu;
+}tA2DP_START_REQ;
+
+typedef struct
+{
+    UINT8   opcode;     /* A2DP_STOP_REQ */
+    UINT16  lcid;
+}tA2DP_STOP_REQ;
+
+typedef struct
+{
+    UINT8   opcode;     /* A2DP_SUSPEND_REQ */
+    UINT16  lcid;
+}tA2DP_SUSPEND_REQ;
+
+typedef struct
+{
+    UINT8   opcode;     /* A2DP_CLEANUP_REQ */
+    UINT16  lcid;
+    UINT16  curr_mtu;
+} tA2DP_CLEANUP_REQ;
+
+typedef struct
+{
+    UINT8   opcode;     /* A2DP_START_RESP, A2DP_STOP_RESP, A2DP_CLEANUP_RESP, A2DP_SUSPEND_RESP */
+    UINT16  lcid;
+}tA2DP_GENERIC_RESP;
+
+#define AUDIO_CODEC_NONE            0x0000
+#define AUDIO_CODEC_SBC_ENC         0x0001
+#define AUDIO_CODEC_SBC_DEC         0x0002
+#define AUDIO_CODEC_MP3_ENC         0x0004
+#define AUDIO_CODEC_MP3_DEC         0x0008
+#define AUDIO_CODEC_AAC_ENC         0x0010
+#define AUDIO_CODEC_AAC_DEC         0x0020
+#define AUDIO_CODEC_AAC_PLUS_ENC    0x0040
+#define AUDIO_CODEC_AAC_PLUS_DEC    0x0080
+#define AUDIO_CODEC_MP2_ENC         0x0100
+#define AUDIO_CODEC_MP2_DEC         0x0200
+#define AUDIO_CODEC_MP2_5_ENC       0x0400
+#define AUDIO_CODEC_MP2_5_DEC       0x0800
+
+typedef UINT16 tAUDIO_CODEC_TYPE;
+
+/* SBC CODEC Parameters */
+
+#define CODEC_INFO_SBC_SF_16K       0x00
+#define CODEC_INFO_SBC_SF_32K       0x01
+#define CODEC_INFO_SBC_SF_44K       0x02
+#define CODEC_INFO_SBC_SF_48K       0x03
+
+#define CODEC_INFO_SBC_BLOCK_4      0x00
+#define CODEC_INFO_SBC_BLOCK_8      0x01
+#define CODEC_INFO_SBC_BLOCK_12     0x02
+#define CODEC_INFO_SBC_BLOCK_16     0x03
+
+#define CODEC_INFO_SBC_CH_MONO      0x00
+#define CODEC_INFO_SBC_CH_DUAL      0x01
+#define CODEC_INFO_SBC_CH_STEREO    0x02
+#define CODEC_INFO_SBC_CH_JS        0x03
+
+#define CODEC_INFO_SBC_ALLOC_LOUDNESS   0x00
+#define CODEC_INFO_SBC_ALLOC_SNR        0x01
+
+#define CODEC_INFO_SBC_SUBBAND_4    0x00
+#define CODEC_INFO_SBC_SUBBAND_8    0x01
+
+/* MPEG audio version ID */
+#define CODEC_INFO_MP25_ID              0x00
+#define CODEC_INFO_RESERVE              0x01
+#define CODEC_INFO_MP2_ID               0x02
+#define CODEC_INFO_MP3_ID               0x03
+
+#define CODEC_INFO_MP3_PROTECTION_ON    0x00
+#define CODEC_INFO_MP3_PROTECTION_OFF   0x01
+
+#define CODEC_INFO_MP3_BR_IDX_FREE      0x00
+#define CODEC_INFO_MP3_BR_IDX_32K       0x01
+#define CODEC_INFO_MP3_BR_IDX_40K       0x02
+#define CODEC_INFO_MP3_BR_IDX_48K       0x03
+#define CODEC_INFO_MP3_BR_IDX_56K       0x04
+#define CODEC_INFO_MP3_BR_IDX_64K       0x05
+#define CODEC_INFO_MP3_BR_IDX_80K       0x06
+#define CODEC_INFO_MP3_BR_IDX_96K       0x07
+#define CODEC_INFO_MP3_BR_IDX_112K      0x08
+#define CODEC_INFO_MP3_BR_IDX_128K      0x09
+#define CODEC_INFO_MP3_BR_IDX_160K      0x0A
+#define CODEC_INFO_MP3_BR_IDX_192K      0x0B
+#define CODEC_INFO_MP3_BR_IDX_224K      0x0C
+#define CODEC_INFO_MP3_BR_IDX_256K      0x0D
+#define CODEC_INFO_MP3_BR_IDX_320K      0x0E
+
+#define CODEC_INFO_MP3_SF_44K           0x00
+#define CODEC_INFO_MP3_SF_48K           0x01
+#define CODEC_INFO_MP3_SF_32K           0x02
+
+#define CODEC_INFO_MP3_MODE_STEREO      0x00
+#define CODEC_INFO_MP3_MODE_JS          0x01
+#define CODEC_INFO_MP3_MODE_DUAL        0x02
+#define CODEC_INFO_MP3_MODE_SINGLE      0x03
+
+/* layer 3, type of joint stereo coding method (intensity and ms) */
+#define CODEC_INFO_MP3_MODE_EXT_OFF_OFF 0x00
+#define CODEC_INFO_MP3_MODE_EXT_ON_OFF  0x01
+#define CODEC_INFO_MP3_MODE_EXT_OFF_ON  0x02
+#define CODEC_INFO_MP3_MODE_EXT_ON_ON   0x03
+
+
+#define CODEC_INFO_MP2_PROTECTION_ON    0x00
+#define CODEC_INFO_MP2_PROTECTION_OFF   0x01
+
+#define CODEC_INFO_MP2_BR_IDX_FREE      0x00
+#define CODEC_INFO_MP2_BR_IDX_8K        0x01
+#define CODEC_INFO_MP2_BR_IDX_16K       0x02
+#define CODEC_INFO_MP2_BR_IDX_24K       0x03
+#define CODEC_INFO_MP2_BR_IDX_32K       0x04
+#define CODEC_INFO_MP2_BR_IDX_40K       0x05
+#define CODEC_INFO_MP2_BR_IDX_48K       0x06
+#define CODEC_INFO_MP2_BR_IDX_56K       0x07
+#define CODEC_INFO_MP2_BR_IDX_64K       0x08
+#define CODEC_INFO_MP2_BR_IDX_80K       0x09
+#define CODEC_INFO_MP2_BR_IDX_96K       0x0A
+#define CODEC_INFO_MP2_BR_IDX_112K      0x0B
+#define CODEC_INFO_MP2_BR_IDX_128K      0x0C
+#define CODEC_INFO_MP2_BR_IDX_144K      0x0D
+#define CODEC_INFO_MP2_BR_IDX_160K      0x0E
+
+#define CODEC_INFO_MP2_SF_22K           0x00
+#define CODEC_INFO_MP2_SF_24K           0x01
+#define CODEC_INFO_MP2_SF_16K           0x02
+
+#define CODEC_INFO_MP2_MODE_STEREO      0x00
+#define CODEC_INFO_MP2_MODE_JS          0x01
+#define CODEC_INFO_MP2_MODE_DUAL        0x02
+#define CODEC_INFO_MP2_MODE_SINGLE      0x03
+
+/* layer 3, type of joint stereo coding method (intensity and ms) */
+#define CODEC_INFO_MP2_MODE_EXT_OFF_OFF 0x00
+#define CODEC_INFO_MP2_MODE_EXT_ON_OFF  0x01
+#define CODEC_INFO_MP2_MODE_EXT_OFF_ON  0x02
+#define CODEC_INFO_MP2_MODE_EXT_ON_ON   0x03
+
+#define CODEC_INFO_MP2_SAMPLE_PER_FRAME     576
+
+/* mpeg 2.5 layer 3 decoder */
+
+#define CODEC_INFO_MP25_PROTECTION_ON   0x00
+#define CODEC_INFO_MP25_PROTECTION_OFF  0x01
+
+#define CODEC_INFO_MP25_BR_IDX_FREE     0x00
+#define CODEC_INFO_MP25_BR_IDX_8K       0x01
+#define CODEC_INFO_MP25_BR_IDX_16K      0x02
+#define CODEC_INFO_MP25_BR_IDX_24K      0x03
+#define CODEC_INFO_MP25_BR_IDX_32K      0x04
+#define CODEC_INFO_MP25_BR_IDX_40K      0x05
+#define CODEC_INFO_MP25_BR_IDX_48K      0x06
+#define CODEC_INFO_MP25_BR_IDX_56K      0x07
+#define CODEC_INFO_MP25_BR_IDX_64K      0x08
+#define CODEC_INFO_MP25_BR_IDX_80K      0x09
+#define CODEC_INFO_MP25_BR_IDX_96K      0x0A
+#define CODEC_INFO_MP25_BR_IDX_112K     0x0B
+#define CODEC_INFO_MP25_BR_IDX_128K     0x0C
+#define CODEC_INFO_MP25_BR_IDX_144K     0x0D
+#define CODEC_INFO_MP25_BR_IDX_160K     0x0E
+
+#define CODEC_INFO_MP25_SF_11K          0x00
+#define CODEC_INFO_MP25_SF_12K          0x01
+#define CODEC_INFO_MP25_SF_8K           0x02
+
+#define CODEC_INFO_MP25_MODE_STEREO     0x00
+#define CODEC_INFO_MP25_MODE_JS         0x01
+#define CODEC_INFO_MP25_MODE_DUAL       0x02
+#define CODEC_INFO_MP25_MODE_SINGLE     0x03
+
+/* layer 3, type of joint stereo coding method (intensity and ms) */
+#define CODEC_INFO_MP25_MODE_EXT_OFF_OFF 0x00
+#define CODEC_INFO_MP25_MODE_EXT_ON_OFF  0x01
+#define CODEC_INFO_MP25_MODE_EXT_OFF_ON  0x02
+#define CODEC_INFO_MP25_MODE_EXT_ON_ON   0x03
+
+#define CODEC_INFO_MP25_SAMPLE_PER_FRAME    576
+
+/* AAC/AAC+ CODEC Parameters */
+#define CODEC_INFO_AAC_SF_IDX_96K   0x0
+#define CODEC_INFO_AAC_SF_IDX_88K   0x1
+#define CODEC_INFO_AAC_SF_IDX_64K   0x2
+#define CODEC_INFO_AAC_SF_IDX_48K   0x3
+#define CODEC_INFO_AAC_SF_IDX_44K   0x4
+#define CODEC_INFO_AAC_SF_IDX_32K   0x5
+#define CODEC_INFO_AAC_SF_IDX_24K   0x6
+#define CODEC_INFO_AAC_SF_IDX_22K   0x7
+#define CODEC_INFO_AAC_SF_IDX_16K   0x8
+#define CODEC_INFO_AAC_SF_IDX_12K   0x9
+#define CODEC_INFO_AAC_SF_IDX_11K   0xA
+#define CODEC_INFO_AAC_SF_IDX_08K   0xB
+#define CODEC_INFO_AAC_SF_IDX_RESERVE   0xC
+
+#define CODEC_INFO_AAC_BR_RATE_48K  288000
+#define CODEC_INFO_AAC_BR_RATE_44K  264600
+#define CODEC_INFO_AAC_BR_RATE_32K  192000
+
+
+#define CODEC_INFO_AAC_1_CH           1         /*center front speaker */
+#define CODEC_INFO_AAC_2_CH           2         /*left, right front speaker */
+#define CODEC_INFO_AAC_3_CH           3         /*center front speaker, left right front speaker */
+#define CODEC_INFO_AAC_4_CH           4         /*center/rear front speaker, left/right front speaker */
+#define CODEC_INFO_AAC_5_CH           5         /*center, left, right front speaker, left/right surround */
+#define CODEC_INFO_AAC_6_CH           6         /*center, left, right front speaker, left/right surround, LFE */
+#define CODEC_INFO_AAC_7_CH           7         /*(left, right)center/left,right front speaker, left/right surround, LFE */
+
+
+typedef struct
+{
+    UINT8   sampling_freq;
+    UINT8   channel_mode;
+    UINT8   block_length;
+    UINT8   num_subbands;
+    UINT8   alloc_method;
+    UINT8   bitpool_size;   /* 2 - 250 */
+} tCODEC_INFO_SBC;
+
+typedef struct
+{
+    UINT8   ch_mode;
+    UINT8   sampling_freq;
+    UINT8   bitrate_index;  /* 0 - 14 */
+} tCODEC_INFO_MP3;
+
+typedef struct
+{
+    UINT8   ch_mode;
+    UINT8   sampling_freq;
+    UINT8   bitrate_index;  /* 0 - 14 */
+} tCODEC_INFO_MP2;
+
+
+typedef struct
+{
+    UINT8   ch_mode;
+    UINT8   sampling_freq;
+    UINT8   bitrate_index;  /* 0 - 14 */
+} tCODEC_INFO_MP2_5;
+
+typedef struct
+{
+    UINT16  sampling_freq;
+    UINT8   channel_mode;   /* 0x02:mono, 0x01:dual */
+    UINT32  bitrate;        /* 0 - 320K */
+    UINT32  sbr_profile;        /* 1: ON, 0: OFF */
+} tCODEC_INFO_AAC;
+
+typedef union
+{
+    tCODEC_INFO_SBC     sbc;
+    tCODEC_INFO_MP3     mp3;
+    tCODEC_INFO_MP2     mp2;
+    tCODEC_INFO_MP2_5   mp2_5;
+    tCODEC_INFO_AAC     aac;
+} tCODEC_INFO;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_CODEC_CONFIG_REQ */
+    tAUDIO_CODEC_TYPE   codec_type;
+    tCODEC_INFO         codec_info;
+} tAUDIO_CODEC_CONFIG_REQ;
+
+#define AUDIO_CONFIG_SUCCESS            0x00
+#define AUDIO_CONFIG_NOT_SUPPORTED      0x01
+#define AUDIO_CONFIG_FAIL_OUT_OF_MEMORY 0x02
+#define AUDIO_CONFIG_FAIL_CODEC_USED    0x03
+#define AUDIO_CONFIG_FAIL_ROUTE         0x04
+typedef UINT8 tAUDIO_CONFIG_STATUS;
+
+typedef struct
+{
+    UINT8                   opcode; /* AUDIO_CODEC_CONFIG_RESP */
+    tAUDIO_CONFIG_STATUS    status;
+} tAUDIO_CODEC_CONFIG_RESP;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_CODEC_SET_BITRATE_REQ */
+    tAUDIO_CODEC_TYPE   codec_type;
+    union
+    {
+        UINT8   sbc;
+        UINT8   mp3;
+        UINT32  aac;
+    } codec_bitrate;
+} tAUDIO_CODEC_SET_BITRATE_REQ;
+
+#define AUDIO_ROUTE_SRC_FMRX        0x00
+#define AUDIO_ROUTE_SRC_I2S         0x01
+#define AUDIO_ROUTE_SRC_ADC         0x02
+#define AUDIO_ROUTE_SRC_HOST        0x03
+#define AUDIO_ROUTE_SRC_PTU         0x04
+#define AUDIO_ROUTE_SRC_BTSNK       0x05
+#define AUDIO_ROUTE_SRC_NONE        0x80
+#define MAX_AUDIO_ROUTE_SRC         6
+typedef UINT8 tAUDIO_ROUTE_SRC;
+
+#define AUDIO_ROUTE_MIX_NONE        0x00
+#define AUDIO_ROUTE_MIX_HOST        0x01
+#define AUDIO_ROUTE_MIX_PCM         0x02
+#define AUDIO_ROUTE_MIX_CHIRP       0x03
+#define AUDIO_ROUTE_MIX_I2S         0x04
+#define AUDIO_ROUTE_MIX_ADC         0x05
+#define AUDIO_ROUTE_MIX_RESERVED    0x06
+#define MAX_AUDIO_ROUTE_MIX         7
+typedef UINT8 tAUDIO_ROUTE_MIX;
+
+#define AUDIO_ROUTE_OUT_NONE        0x0000
+#define AUDIO_ROUTE_OUT_BTA2DP      0x0001
+#define AUDIO_ROUTE_OUT_FMTX        0x0002
+#define AUDIO_ROUTE_OUT_BTSCO       0x0004
+#define AUDIO_ROUTE_OUT_HOST        0x0008
+#define AUDIO_ROUTE_OUT_DAC         0x0010
+#define AUDIO_ROUTE_OUT_I2S         0x0020
+#define AUDIO_ROUTE_OUT_BTA2DP_DAC  0x0040
+#define AUDIO_ROUTE_OUT_BTA2DP_I2S  0x0080
+#define AUDIO_ROUTE_OUT_BTSCO_DAC   0x0100
+#define AUDIO_ROUTE_OUT_BTSCO_I2S   0x0200
+#define AUDIO_ROUTE_OUT_HOST_BTA2DP 0x0400
+#define AUDIO_ROUTE_OUT_HOST_BTSCO  0x0800
+#define AUDIO_ROUTE_OUT_HOST_DAC    0x1000
+#define AUDIO_ROUTE_OUT_HOST_I2S    0x2000
+#define AUDIO_ROUTE_OUT_DAC_I2S     0x4000
+#define AUDIO_ROUTE_OUT_RESERVED_2  0x8000
+
+#define MAX_AUDIO_SINGLE_ROUTE_OUT  6
+#define MAX_AUDIO_MULTI_ROUTE_OUT   16
+typedef UINT16 tAUDIO_MULTI_ROUTE_OUT;
+typedef UINT8  tAUDIO_ROUTE_OUT;
+
+#define AUDIO_ROUTE_SF_8K           0x00
+#define AUDIO_ROUTE_SF_16K          0x01
+#define AUDIO_ROUTE_SF_32K          0x02
+#define AUDIO_ROUTE_SF_44_1K        0x03
+#define AUDIO_ROUTE_SF_48K          0x04
+#define AUDIO_ROUTE_SF_11K          0x05
+#define AUDIO_ROUTE_SF_12K          0x06
+#define AUDIO_ROUTE_SF_22K          0x07
+#define AUDIO_ROUTE_SF_24K          0x08
+#define AUDIO_ROUTE_SF_NA           0xFF
+typedef UINT8 tAUDIO_ROUTE_SF;
+
+#define AUDIO_ROUTE_EQ_BASS_BOOST   0x00
+#define AUDIO_ROUTE_EQ_CLASSIC      0x01
+#define AUDIO_ROUTE_EQ_JAZZ         0x02
+#define AUDIO_ROUTE_EQ_LIVE         0x03
+#define AUDIO_ROUTE_EQ_NORMAL       0x04
+#define AUDIO_ROUTE_EQ_ROCK         0x05
+#define AUDIO_ROUTE_EQ_BYPASS       0x06
+
+#define AUDIO_ROUTE_DIGITAL_VOLUME_CONTROL  0x07
+
+#define AUDIO_ROUTE_EQ_CONFIG_GAIN  0xFF    /* Custion Gain Config */
+typedef UINT8 tAUDIO_ROUTE_EQ;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_ROUTE_CONFIG_REQ */
+    tAUDIO_ROUTE_SRC    src;
+    tAUDIO_ROUTE_SF     src_sf;
+    tAUDIO_ROUTE_OUT    out;
+    tAUDIO_ROUTE_SF     out_codec_sf;
+    tAUDIO_ROUTE_SF     out_i2s_sf;
+    tAUDIO_ROUTE_EQ     eq_mode;
+} tAUDIO_ROUTE_CONFIG_REQ;
+
+typedef struct
+{
+    UINT8                   opcode; /* AUDIO_ROUTE_CONFIG_RESP */
+    tAUDIO_CONFIG_STATUS    status;
+} tAUDIO_ROUTE_CONFIG_RESP;
+
+typedef struct
+{
+    UINT16  amp[2];                 /* left/right 15 bit amplitude value        */
+    UINT16  tone[2];                /* left/right 12 bit frequency 0 - 4096Hz   */
+    UINT16  mark[2];                /* left/right 16 bit mark time 0 - 65535ms  */
+    UINT16  space[2];               /* left/right 16 bit space time 0 - 65535ms */
+} tCHIRP_CONFIG;
+
+typedef struct
+{
+    UINT8   pri_l;                  /* Primary Left scale : 0 ~ 255     */
+    UINT8   mix_l;                  /* Mixing Left scale : 0 ~ 255      */
+    UINT8   pri_r;                  /* Primary Right scale : 0 ~ 255    */
+    UINT8   mix_r;                  /* Mixing Right scale : 0 ~ 255     */
+} tMIX_SCALE_CONFIG;
+
+/* For custon equalizer gain configuration */
+typedef struct
+{
+    UINT32  audio_l_g0;         /* IIR biquad filter left ch gain 0 */
+    UINT32  audio_l_g1;         /* IIR biquad filter left ch gain 1 */
+    UINT32  audio_l_g2;         /* IIR biquad filter left ch gain 2 */
+    UINT32  audio_l_g3;         /* IIR biquad filter left ch gain 3 */
+    UINT32  audio_l_g4;         /* IIR biquad filter left ch gain 4 */
+    UINT32  audio_l_gl;         /* IIR biquad filter left ch global gain  */
+    UINT32  audio_r_g0;         /* IIR biquad filter left ch gain 0 */
+    UINT32  audio_r_g1;         /* IIR biquad filter left ch gain 1 */
+    UINT32  audio_r_g2;         /* IIR biquad filter left ch gain 2 */
+    UINT32  audio_r_g3;         /* IIR biquad filter left ch gain 3 */
+    UINT32  audio_r_g4;         /* IIR biquad filter left ch gain 4 */
+    UINT32  audio_r_gl;         /* IIR biquad filter left ch global gain */
+} tEQ_GAIN_CONFIG;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_MIX_CONFIG_REQ */
+    tAUDIO_ROUTE_MIX    mix_src;
+    tAUDIO_ROUTE_SF     mix_src_sf;
+    tMIX_SCALE_CONFIG   mix_scale;
+    tCHIRP_CONFIG       chirp_config;
+} tAUDIO_MIX_CONFIG_REQ;
+
+typedef struct
+{
+    UINT8                   opcode; /* AUDIO_MIX_CONFIG_RESP */
+    tAUDIO_CONFIG_STATUS    status;
+} tAUDIO_MIX_CONFIG_RESP;
+
+
+typedef struct
+{
+    UINT8   opcode;                 /* AUDIO_BURST_FRAMES_IND */
+    UINT32  burst_size;             /* in bytes */
+} tAUDIO_BURST_FRAMES_IND;
+
+typedef struct
+{
+    UINT8   opcode;                 /* AUDIO_BURST_END_IND */
+} tAUDIO_BURST_END_IND;
+
+typedef struct
+{
+    UINT8   opcode;                 /* AUDIO_CODEC_FLUSH_REQ */
+} tAUDIO_CODEC_FLUSH_REQ;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_EQ_MODE_CONFIG_REQ */
+    tAUDIO_ROUTE_EQ     eq_mode;
+    tEQ_GAIN_CONFIG     filter_gain;    /* Valid only when eq_mode is 0xFF */
+} tAUDIO_EQ_MODE_CONFIG_REQ;
+
+typedef struct
+{
+    UINT8               opcode;     /* AUDIO_SCALE_CONFIG_REQ */
+    tMIX_SCALE_CONFIG   mix_scale;
+} tAUDIO_SCALE_CONFIG_REQ;
+
+typedef UINT8 tBTA_AV_DUAL_STACK_EVT;
+
+typedef struct
+{
+    UINT8               avdt_handle;    /* AVDTP handle */
+    UINT8               chnl;           /* the channel: audio/video */
+    UINT8               codec_type;     /* codec type */
+    BOOLEAN             cong;           /* TRUE if AVDTP congested */
+    UINT8               hdi;            /* the index to SCB[] */
+    UINT8               hndl;           /* the handle: ((hdi + 1)|chnl) */
+    UINT8               l2c_bufs;       /* the number of buffers queued to L2CAP */
+    UINT16              l2c_cid;        /* L2CAP channel ID */
+    BD_ADDR             peer_addr;      /* peer BD address */
+}tBTA_AV_SYNC_INFO;
+
+typedef struct
+{
+    tBTA_AV_DUAL_STACK_EVT  event;
+    tBTA_AV_SYNC_INFO       sync_info;
+    UINT16                  curr_mtu;                 /* common mtu shared by all active streams */
+    UINT8                   multi_av_supported;       /* Whether multi-av is supported */
+}tBTA_AV_SYNC_INFO_REQ; /* SYNC_TO_LITE_REQ */
+
+/* Dual stack stream events */
+typedef struct
+{
+    tBTA_AV_DUAL_STACK_EVT          event;
+    UINT8                           scb_idx;
+}tBTA_AV_SCB_EVT;
+
+/* data type for the Audio Codec Information*/
+typedef struct
+{
+    UINT16  bit_rate;                   /* SBC encoder bit rate in kbps */
+    UINT16  bit_rate_busy;              /* SBC encoder bit rate in kbps */
+    UINT16  bit_rate_swampd;            /* SBC encoder bit rate in kbps */
+    UINT8   busy_level;                 /* Busy level indicating the bit-rate to be used */
+    UINT8   codec_info[AVDT_CODEC_SIZE];
+    UINT8   codec_type;                 /* Codec type */
+} tBTA_AV_AUDIO_CODEC_SYNC_INFO;
+
+/* Dual stack stream events */
+typedef struct
+{
+    tBTA_AV_DUAL_STACK_EVT          event;
+    UINT8                           scb_idx;
+    UINT8                           audio_open_cnt;
+    tBTA_AV_AUDIO_CODEC_SYNC_INFO   p_codec_cfg;
+    UINT8                           start_stop_flag;
+}tBTA_AV_SCB_REQ;
+
+typedef struct
+{
+    tBTA_AV_DUAL_STACK_EVT          event;
+    UINT8                           scb_idx;
+    UINT8                           audio_open_cnt;
+    UINT16                          curr_mtu;           /* common mtu shared by all active streams */
+}tBTA_AV_SCB_CLEANUP_REQ;
+
+/* Add request/response structures if needed ...
+typedef struct
+{
+    event;
+    data;
+}tBTA_AV_SYNC_*_REQ/RESP;
+*/
+
+typedef union
+{
+    /* MM light stack */
+    tBTA_AV_DUAL_STACK_EVT          event;
+    tBTA_AV_SYNC_INFO_REQ           sync_info_req;
+    tBTA_AV_SCB_EVT                 scb_evt;
+    tBTA_AV_SCB_REQ                 scb_req;
+    tBTA_AV_SCB_CLEANUP_REQ         scb_cleanup_req;
+
+    /* BTC light stack */
+    UINT8                           opcode;
+    tA2DP_START_REQ                 btc_start_req;
+    tA2DP_STOP_REQ                  btc_stop_req;
+    tA2DP_CLEANUP_REQ               btc_cleanup_req;
+    tA2DP_SUSPEND_REQ               btc_suspend_req;
+
+    tAUDIO_CODEC_CONFIG_REQ         codec_config_req;
+    tAUDIO_CODEC_SET_BITRATE_REQ    codec_bitrate_req;
+    tAUDIO_CODEC_FLUSH_REQ          codec_flush_req;
+    tAUDIO_ROUTE_CONFIG_REQ         route_config_req;
+    tAUDIO_MIX_CONFIG_REQ           mix_config_req;
+    tAUDIO_EQ_MODE_CONFIG_REQ       eq_mode_req;
+    tAUDIO_SCALE_CONFIG_REQ         scale_config_req;
+}tBTA_DUAL_STACK_MSG;
+
+#endif /* UIPC_MSG_H */
diff --git a/stack/include/utfc.h b/stack/include/utfc.h
new file mode 100644
index 0000000..787efe8
--- /dev/null
+++ b/stack/include/utfc.h
@@ -0,0 +1,61 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  UTF conversion utilities.
+ *
+ ******************************************************************************/
+#ifndef UTFC_H
+#define UTFC_H
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/*******************************************************************************
+**
+** Function         utfc_16_to_8
+**
+** Description      Convert a UTF-16 array to a null-terminated UTF-8 string.
+**                  Illegal characters are skipped.
+**
+** Returns          Length of UTF-8 string in bytes.
+**
+*******************************************************************************/
+extern UINT16 utfc_16_to_8(UINT8 *p_utf8, UINT16 utf8_len, UINT16 *p_utf16, UINT16 utf16_len);
+
+/*******************************************************************************
+**
+** Function         utfc_8_to_16
+**
+** Description      Convert a null-terminated UTF-8 string to a UTF-16 array.
+**                  Illegal characters are skipped.  The UTF-16 array is
+**                  appended with a zero (null) character.
+**
+** Returns          Length of UTF-16 array including null character.
+**
+*******************************************************************************/
+extern UINT16 utfc_8_to_16(UINT16 *p_utf16, UINT16 utf16_len, UINT8 *p_utf8);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* UTFC_H */
diff --git a/stack/include/wbt_api.h b/stack/include/wbt_api.h
new file mode 100644
index 0000000..8bfb772
--- /dev/null
+++ b/stack/include/wbt_api.h
@@ -0,0 +1,71 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains definitions and constants used by the Broadcom
+ *  Bluetooth Extensions API software.
+ *
+ ******************************************************************************/
+#ifndef WBT_API_H
+#define WBT_API_H
+
+#include "bt_target.h"
+
+/*****************************************************************************
+**  Constants and Types
+*****************************************************************************/
+
+/**************************
+* SDP Attribute IDs *
+***************************/
+#define ATTR_ID_EXT_BRCM_VERSION    0x8001  /* UINT16 (0xmmnn - major, minor [0x0001]) mandatory */
+#define ATTR_ID_EXT_PIN_CODE        0x8002  /* UINT32 4 - digit pin */
+
+/**************************
+* SDP Attribute ID Values *
+***************************/
+/* Version Attribute Value */
+#define BRCM_EXT_VERSION            0x0001  /* UINT16 (0xmmnn - major, minor [0x0001]) mandatory */
+
+/* Pin Code Attribute Value */
+#define BRCM_EXT_PIN_CODE           0x00000000  /* UINT32 ('0000') */
+
+/*****************************************************************************
+**  External Function Declarations
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+BT_API extern BOOLEAN WBT_ExtCreateRecord(void);
+
+/*** Features ***/
+BT_API extern BOOLEAN WBT_ExtAddPinCode(void);
+
+
+BT_API extern UINT32 wbt_sdp_show_ext(UINT8 scn, char *service_name,
+                                      UINT8 pin_code_ext,
+                                      UINT8 active_sync_ext);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* WBT_API_H */
diff --git a/stack/include/wcassert.h b/stack/include/wcassert.h
new file mode 100644
index 0000000..a1d7b47
--- /dev/null
+++ b/stack/include/wcassert.h
@@ -0,0 +1,65 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef WC_ASSERT_H
+#define WC_ASSERT_H
+
+
+#ifdef _DEBUG
+
+#include "bt_target.h"
+
+
+
+/* debug settings*/
+#ifndef WC_DEBUG_LEVEL
+#define WC_DEBUG_LEVEL 0
+#endif
+
+#if WC_DEBUG_LEVEL == 0
+
+#include "stdio.h"  /* for printf()*/
+
+#ifdef __cplusplus
+extern "C" wc_assert(char *message, char *file, UINT32 line);
+#else
+void wc_assert(char *message, char *file, UINT32 line);
+#endif
+
+#define WC_ASSERT(_x) if ( !(_x) ) wc_assert("ASSERT at %s line %d\n", __FILE__, __LINE__);
+#define WC_ASSERT_ALWAYS() wc_assert("ASSERT! at %s line %d\n", __FILE__, __LINE__);
+
+#elif WC_DEBUG_LEVEL == 1
+
+#include "assert.h"
+
+#define WC_ASSERT(_x)        assert(_x);
+#define WC_ASSERT_ALWAYS()   assert(0);
+#endif  /* WC_DEBUG_LEVEL*/
+
+#else /* _DEBUG*/
+
+#ifndef WC_ASSERT
+#define WC_ASSERT(_x)         ;
+#endif
+
+#ifndef WC_ASSERT_ALWAYS
+#define WC_ASSERT_ALWAYS()    ;
+#endif
+
+#endif /* _DEBUG*/
+#endif /* WC_ASSERT_H*/
diff --git a/stack/l2cap/l2c_api.c b/stack/l2cap/l2c_api.c
new file mode 100644
index 0000000..691d386
--- /dev/null
+++ b/stack/l2cap/l2c_api.c
@@ -0,0 +1,1812 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the L2CAP API code
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "btu.h"
+#include "btm_api.h"
+
+/*******************************************************************************
+**
+** Function         L2CA_Register
+**
+** Description      Other layers call this function to register for L2CAP
+**                  services.
+**
+** Returns          PSM to use or zero if error. Typically, the PSM returned
+**                  is the same as was passed in, but for an outgoing-only
+**                  connection to a dynamic PSM, a "virtual" PSM is returned
+**                  and should be used in the calls to L2CA_ConnectReq(),
+**                  L2CA_ErtmConnectReq() and L2CA_Deregister()
+**
+*******************************************************************************/
+UINT16 L2CA_Register (UINT16 psm, tL2CAP_APPL_INFO *p_cb_info)
+{
+    tL2C_RCB    *p_rcb;
+    UINT16      vpsm = psm;
+
+    L2CAP_TRACE_API1 ("L2CAP - L2CA_Register() called for PSM: 0x%04x", psm);
+
+    /* Verify that the required callback info has been filled in
+    **      Note:  Connection callbacks are required but not checked
+    **             for here because it is possible to be only a client
+    **             or only a server.
+    */
+    if ((!p_cb_info->pL2CA_ConfigCfm_Cb)
+     || (!p_cb_info->pL2CA_ConfigInd_Cb)
+     || (!p_cb_info->pL2CA_DataInd_Cb)
+     || (!p_cb_info->pL2CA_DisconnectInd_Cb))
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - no cb registering PSM: 0x%04x", psm);
+        return (0);
+    }
+
+    /* Verify PSM is valid */
+    if (L2C_INVALID_PSM(psm))
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - invalid PSM value, PSM: 0x%04x", psm);
+        return (0);
+    }
+
+    /* Check if this is a registration for an outgoing-only connection to */
+    /* a dynamic PSM. If so, allocate a "virtual" PSM for the app to use. */
+    if ( (psm >= 0x1001) && (p_cb_info->pL2CA_ConnectInd_Cb == NULL) )
+    {
+        for (vpsm = 0x1002; vpsm < 0x8000; vpsm += 2)
+        {
+            if ((p_rcb = l2cu_find_rcb_by_psm (vpsm)) == NULL)
+                break;
+        }
+
+        L2CAP_TRACE_API2 ("L2CA_Register - Real PSM: 0x%04x  Virtual PSM: 0x%04x", psm, vpsm);
+    }
+
+    /* If registration block already there, just overwrite it */
+    if ((p_rcb = l2cu_find_rcb_by_psm (vpsm)) == NULL)
+    {
+        if ((p_rcb = l2cu_allocate_rcb (vpsm)) == NULL)
+        {
+            L2CAP_TRACE_WARNING2 ("L2CAP - no RCB available, PSM: 0x%04x  vPSM: 0x%04x", psm, vpsm);
+            return (0);
+        }
+    }
+
+    p_rcb->api      = *p_cb_info;
+    p_rcb->real_psm = psm;
+
+    return (vpsm);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         L2CA_Deregister
+**
+** Description      Other layers call this function to de-register for L2CAP
+**                  services.
+**
+** Returns          void
+**
+*******************************************************************************/
+void L2CA_Deregister (UINT16 psm)
+{
+    tL2C_RCB    *p_rcb;
+    tL2C_CCB    *p_ccb;
+    tL2C_LCB    *p_lcb;
+    int         ii;
+
+    L2CAP_TRACE_API1 ("L2CAP - L2CA_Deregister() called for PSM: 0x%04x", psm);
+
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) != NULL)
+    {
+        p_lcb = &l2cb.lcb_pool[0];
+        for (ii = 0; ii < MAX_L2CAP_LINKS; ii++, p_lcb++)
+        {
+            if (p_lcb->in_use)
+            {
+                if (((p_ccb = p_lcb->ccb_queue.p_first_ccb) == NULL)
+                 || (p_lcb->link_state == LST_DISCONNECTING))
+                    continue;
+
+                if ((p_ccb->in_use) &&
+                    ((p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP) ||
+                     (p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP)))
+                    continue;
+
+                if (p_ccb->p_rcb == p_rcb)
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL);
+            }
+        }
+        l2cu_release_rcb (p_rcb);
+    }
+    else
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - PSM: 0x%04x not found for deregistration", psm);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_AllocatePSM
+**
+** Description      Other layers call this function to find an unused PSM for L2CAP
+**                  services.
+**
+** Returns          PSM to use.
+**
+*******************************************************************************/
+UINT16 L2CA_AllocatePSM(void)
+{
+    BOOLEAN done = FALSE;
+    UINT16 psm = l2cb.dyn_psm;
+
+    L2CAP_TRACE_API0( "L2CA_AllocatePSM");
+    while (!done)
+    {
+        psm += 2;
+        if (psm > 0xfeff)
+        {
+            psm = 0x1001;
+        }
+        else if (psm & 0x0100)
+        {
+            /* the upper byte must be even */
+            psm += 0x0100;
+        }
+
+        /* if psm is in range of reserved BRCM Aware features */
+        if ((BRCM_RESERVED_PSM_START <= psm)&&(psm <= BRCM_RESERVED_PSM_END))
+            continue;
+
+        /* make sure the newlly allocated psm is not used right now */
+        if ((l2cu_find_rcb_by_psm (psm)) == NULL)
+            done = TRUE;
+    }
+    l2cb.dyn_psm = psm;
+
+    return(psm);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_ConnectReq
+**
+** Description      Higher layers call this function to create an L2CAP connection.
+**                  Note that the connection is not established at this time, but
+**                  connection establishment gets started. The callback function
+**                  will be invoked when connection establishes or fails.
+**
+** Returns          the CID of the connection, or 0 if it failed to start
+**
+*******************************************************************************/
+UINT16 L2CA_ConnectReq (UINT16 psm, BD_ADDR p_bd_addr)
+{
+    return L2CA_ErtmConnectReq (psm, p_bd_addr, NULL);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_ErtmConnectReq
+**
+** Description      Higher layers call this function to create an L2CAP connection.
+**                  Note that the connection is not established at this time, but
+**                  connection establishment gets started. The callback function
+**                  will be invoked when connection establishes or fails.
+**
+** Returns          the CID of the connection, or 0 if it failed to start
+**
+*******************************************************************************/
+UINT16 L2CA_ErtmConnectReq (UINT16 psm, BD_ADDR p_bd_addr, tL2CAP_ERTM_INFO *p_ertm_info)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+
+    L2CAP_TRACE_API6 ("L2CA_ErtmConnectReq()  PSM: 0x%04x  BDA: %08x%04x  p_ertm_info: 0x%08x allowed:0x%x preferred:%d", psm,
+                      (p_bd_addr[0]<<24)+(p_bd_addr[1]<<16)+(p_bd_addr[2]<<8)+p_bd_addr[3],
+                      (p_bd_addr[4]<<8)+p_bd_addr[5], p_ertm_info,
+                      (p_ertm_info) ? p_ertm_info->allowed_modes : 0, (p_ertm_info) ? p_ertm_info->preferred_mode : 0);
+
+    /* Fail if we have not established communications with the controller */
+    if (!BTM_IsDeviceUp())
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP connect req - BTU not ready");
+        return (0);
+    }
+    /* Fail if the PSM is not registered */
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no RCB for L2CA_conn_req, PSM: 0x%04x", psm);
+        return (0);
+    }
+
+    /* First, see if we already have a link to the remote */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (p_bd_addr)) == NULL)
+    {
+        /* No link. Get an LCB and start link establishment */
+        if ( ((p_lcb = l2cu_allocate_lcb (p_bd_addr, FALSE)) == NULL)
+         ||  (l2cu_create_conn(p_lcb) == FALSE) )
+        {
+            L2CAP_TRACE_WARNING2 ("L2CAP - conn not started for PSM: 0x%04x  p_lcb: 0x%08x", psm, p_lcb);
+            return (0);
+        }
+    }
+
+    /* Allocate a channel control block */
+    if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_conn_req, PSM: 0x%04x", psm);
+        return (0);
+    }
+
+    /* Save registration info */
+    p_ccb->p_rcb = p_rcb;
+
+    if (p_ertm_info)
+    {
+        p_ccb->ertm_info  = *p_ertm_info;
+
+        /* Replace default indicators with the actual default pool */
+        if (p_ccb->ertm_info.fcr_rx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.fcr_rx_pool_id = L2CAP_FCR_RX_POOL_ID;
+
+        if (p_ccb->ertm_info.fcr_tx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.fcr_tx_pool_id = L2CAP_FCR_TX_POOL_ID;
+
+        if (p_ccb->ertm_info.user_rx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.user_rx_pool_id = HCI_ACL_POOL_ID;
+
+        if (p_ccb->ertm_info.user_tx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.user_tx_pool_id = HCI_ACL_POOL_ID;
+
+        p_ccb->max_rx_mtu = GKI_get_pool_bufsize (p_ertm_info->user_rx_pool_id) - (L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN);
+    }
+
+    /* If link is up, start the L2CAP connection */
+    if (p_lcb->link_state == LST_CONNECTED)
+    {
+        l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_REQ, NULL);
+    }
+
+    /* If link is disconnecting, save link info to retry after disconnect
+     * Possible Race condition when a reconnect occurs
+     * on the channel during a disconnect of link. This
+     * ccb will be automatically retried after link disconnect
+     * arrives
+     */
+    else if (p_lcb->link_state == LST_DISCONNECTING)
+    {
+        L2CAP_TRACE_DEBUG0 ("L2CAP API - link disconnecting: RETRY LATER");
+
+        /* Save ccb so it can be started after disconnect is finished */
+        p_lcb->p_pending_ccb = p_ccb;
+    }
+
+    L2CAP_TRACE_API2 ("L2CAP - L2CA_conn_req(psm: 0x%04x) returned CID: 0x%04x", psm, p_ccb->local_cid);
+
+    /* Return the local CID as our handle */
+    return (p_ccb->local_cid);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_ConnectRsp
+**
+** Description      Higher layers call this function to accept an incoming
+**                  L2CAP connection, for which they had gotten an connect
+**                  indication callback.
+**
+** Returns          TRUE for success, FALSE for failure
+**
+*******************************************************************************/
+BOOLEAN L2CA_ConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, UINT16 result, UINT16 status)
+{
+    return L2CA_ErtmConnectRsp (p_bd_addr, id, lcid, result, status, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_ErtmConnectRsp
+**
+** Description      Higher layers call this function to accept an incoming
+**                  L2CAP connection, for which they had gotten an connect
+**                  indication callback.
+**
+** Returns          TRUE for success, FALSE for failure
+**
+*******************************************************************************/
+BOOLEAN L2CA_ErtmConnectRsp (BD_ADDR p_bd_addr, UINT8 id, UINT16 lcid, UINT16 result,
+                             UINT16 status, tL2CAP_ERTM_INFO *p_ertm_info)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API6 ("L2CA_ErtmConnectRsp()  CID: 0x%04x  Result: %d  Status: %d  BDA: %08x%04x  p_ertm_info:0x%08x",
+                      lcid, result, status,
+                      (p_bd_addr[0]<<24)+(p_bd_addr[1]<<16)+(p_bd_addr[2]<<8)+p_bd_addr[3],
+                      (p_bd_addr[4]<<8)+p_bd_addr[5], p_ertm_info);
+
+    /* First, find the link control block */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (p_bd_addr)) == NULL)
+    {
+        /* No link. Get an LCB and start link establishment */
+        L2CAP_TRACE_WARNING0 ("L2CAP - no LCB for L2CA_conn_rsp");
+        return (FALSE);
+    }
+
+    /* Now, find the channel control block */
+    if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no CCB for L2CA_conn_rsp");
+        return (FALSE);
+    }
+
+    /* The IDs must match */
+    if (p_ccb->remote_id != id)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CAP - bad id in L2CA_conn_rsp. Exp: %d  Got: %d", p_ccb->remote_id, id);
+        return (FALSE);
+    }
+
+    if (p_ertm_info)
+    {
+        p_ccb->ertm_info  = *p_ertm_info;
+
+        /* Replace default indicators with the actual default pool */
+        if (p_ccb->ertm_info.fcr_rx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.fcr_rx_pool_id = L2CAP_FCR_RX_POOL_ID;
+
+        if (p_ccb->ertm_info.fcr_tx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.fcr_tx_pool_id = L2CAP_FCR_TX_POOL_ID;
+
+        if (p_ccb->ertm_info.user_rx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.user_rx_pool_id = HCI_ACL_POOL_ID;
+
+        if (p_ccb->ertm_info.user_tx_pool_id == L2CAP_DEFAULT_ERM_POOL_ID)
+            p_ccb->ertm_info.user_tx_pool_id = HCI_ACL_POOL_ID;
+
+        p_ccb->max_rx_mtu = GKI_get_pool_bufsize (p_ertm_info->user_rx_pool_id) - (L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET + L2CAP_FCS_LEN);
+    }
+
+    if (result == L2CAP_CONN_OK)
+    {
+        l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP, NULL);
+    }
+    else
+    {
+        tL2C_CONN_INFO   conn_info;
+
+        conn_info.l2cap_result = result;
+        conn_info.l2cap_status = status;
+
+        if (result == L2CAP_CONN_PENDING)
+            l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP, &conn_info);
+        else
+            l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONNECT_RSP_NEG, &conn_info);
+    }
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_ConfigReq
+**
+** Description      Higher layers call this function to send configuration.
+**
+**                  Note:  The FCR options of p_cfg are not used.
+**
+** Returns          TRUE if configuration sent, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_ConfigReq (UINT16 cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API5 ("L2CA_ConfigReq()  CID 0x%04x: fcr_present:%d (mode %d) mtu_present:%d (%d)",
+        cid, p_cfg->fcr_present, p_cfg->fcr.mode, p_cfg->mtu_present, p_cfg->mtu);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_cfg_req, CID: %d", cid);
+        return (FALSE);
+    }
+
+    /* We need to have at least one mode type common with the peer */
+    if (!l2c_fcr_adj_our_req_options(p_ccb, p_cfg))
+        return (FALSE);
+
+    /* Don't adjust FCR options if not used */
+    if ((!p_cfg->fcr_present)||(p_cfg->fcr.mode == L2CAP_FCR_BASIC_MODE))
+    {
+        /* FCR and FCS options are not used in basic mode */
+        p_cfg->fcs_present = FALSE;
+        p_cfg->ext_flow_spec_present = FALSE;
+
+        if ( (p_cfg->mtu_present) && (p_cfg->mtu > L2CAP_MTU_SIZE) )
+        {
+            L2CAP_TRACE_WARNING1 ("L2CAP - adjust MTU: %u too large", p_cfg->mtu);
+            p_cfg->mtu = L2CAP_MTU_SIZE;
+        }
+    }
+
+    /* Save the adjusted configuration in case it needs to be used for renegotiation */
+    p_ccb->our_cfg = *p_cfg;
+
+    l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_REQ, p_cfg);
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_ConfigRsp
+**
+** Description      Higher layers call this function to send a configuration
+**                  response.
+**
+** Returns          TRUE if configuration response sent, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_ConfigRsp (UINT16 cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API6 ("L2CA_ConfigRsp()  CID: 0x%04x  Result: %d MTU present:%d Flush TO:%d FCR:%d FCS:%d",
+        cid, p_cfg->result, p_cfg->mtu_present, p_cfg->flush_to_present, p_cfg->fcr_present, p_cfg->fcs_present);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_cfg_rsp, CID: %d", cid);
+        return (FALSE);
+    }
+
+    if ( (p_cfg->result == L2CAP_CFG_OK) || (p_cfg->result == L2CAP_CFG_PENDING) )
+        l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_RSP, p_cfg);
+    else
+    {
+        p_cfg->fcr_present = FALSE; /* FCR options already negotiated before this point */
+
+        /* Clear out any cached options that are being returned as an error (excluding FCR) */
+        if (p_cfg->mtu_present)
+            p_ccb->peer_cfg.mtu_present = FALSE;
+        if (p_cfg->flush_to_present)
+            p_ccb->peer_cfg.flush_to_present = FALSE;
+        if (p_cfg->qos_present)
+            p_ccb->peer_cfg.qos_present = FALSE;
+
+        l2c_csm_execute (p_ccb, L2CEVT_L2CA_CONFIG_RSP_NEG, p_cfg);
+    }
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_DisconnectReq
+**
+** Description      Higher layers call this function to disconnect a channel.
+**
+** Returns          TRUE if disconnect sent, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_DisconnectReq (UINT16 cid)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API1 ("L2CA_DisconnectReq()  CID: 0x%04x", cid);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_disc_req, CID: %d", cid);
+        return (FALSE);
+    }
+
+    l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_REQ, NULL);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_DisconnectRsp
+**
+** Description      Higher layers call this function to acknowledge the
+**                  disconnection of a channel.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN L2CA_DisconnectRsp (UINT16 cid)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API1 ("L2CA_DisconnectRsp()  CID: 0x%04x", cid);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_disc_rsp, CID: %d", cid);
+        return (FALSE);
+    }
+
+    l2c_csm_execute (p_ccb, L2CEVT_L2CA_DISCONNECT_RSP, NULL);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_Ping
+**
+** Description      Higher layers call this function to send an echo request.
+**
+** Returns          TRUE if echo request sent, else FALSE.
+**
+*******************************************************************************/
+BOOLEAN  L2CA_Ping (BD_ADDR p_bd_addr, tL2CA_ECHO_RSP_CB *p_callback)
+{
+    tL2C_LCB        *p_lcb;
+
+    L2CAP_TRACE_API6 ("L2CA_Ping()  BDA: %02x-%02x-%02x-%02x-%02x-%02x",
+                      p_bd_addr[0], p_bd_addr[1], p_bd_addr[2], p_bd_addr[3], p_bd_addr[4], p_bd_addr[5]);
+
+    /* Fail if we have not established communications with the controller */
+    if (!BTM_IsDeviceUp())
+        return (FALSE);
+
+    /* First, see if we already have a link to the remote */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (p_bd_addr)) == NULL)
+    {
+        /* No link. Get an LCB and start link establishment */
+        if ((p_lcb = l2cu_allocate_lcb (p_bd_addr, FALSE)) == NULL)
+        {
+            L2CAP_TRACE_WARNING0 ("L2CAP - no LCB for L2CA_ping");
+            return (FALSE);
+        }
+        if (l2cu_create_conn(p_lcb) == FALSE)
+        {
+            return (FALSE);
+        }
+
+        p_lcb->p_echo_rsp_cb = p_callback;
+
+        return (TRUE);
+    }
+
+    /* We only allow 1 ping outstanding at a time */
+    if (p_lcb->p_echo_rsp_cb != NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - rejected second L2CA_ping");
+        return (FALSE);
+    }
+
+    /* Have a link control block. If link is disconnecting, tell user to retry later */
+    if (p_lcb->link_state == LST_DISCONNECTING)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - L2CA_ping rejected - link disconnecting");
+        return (FALSE);
+    }
+
+    /* Save address of callback */
+    p_lcb->p_echo_rsp_cb = p_callback;
+
+    if (p_lcb->link_state == LST_CONNECTED)
+    {
+        l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID);  /* Make sure not using Broadcom ID */
+        l2cu_send_peer_echo_req (p_lcb, NULL, 0);
+        btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_ECHO_RSP_TOUT);
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_Echo
+**
+** Description      Higher layers call this function to send an echo request
+**                  with application-specific data.
+**
+** Returns          TRUE if echo request sent, else FALSE.
+**
+*******************************************************************************/
+BOOLEAN  L2CA_Echo (BD_ADDR p_bd_addr, BT_HDR *p_data, tL2CA_ECHO_DATA_CB *p_callback)
+{
+    tL2C_LCB    *p_lcb;
+    UINT8       *pp;
+
+    L2CAP_TRACE_API2 ("L2CA_Echo() BDA: %08X%04X",
+            ((p_bd_addr[0] << 24) + (p_bd_addr[1] << 16) + (p_bd_addr[2] <<  8) + (p_bd_addr[3])),
+            ((p_bd_addr[4] <<  8) + (p_bd_addr[5])));
+
+    /* Fail if we have not established communications with the controller */
+    if (!BTM_IsDeviceUp())
+        return (FALSE);
+
+    if ((memcmp(BT_BD_ANY, p_bd_addr, BD_ADDR_LEN) == 0) && (p_data == NULL))
+    {
+        /* Only register callback without sending message. */
+        l2cb.p_echo_data_cb = p_callback;
+        return TRUE;
+    }
+
+    /* We assume the upper layer will call this function only when the link is established. */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (p_bd_addr)) == NULL)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CA_Echo ERROR : link not established");
+        return FALSE;
+    }
+
+    if (p_lcb->link_state != LST_CONNECTED)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CA_Echo ERROR : link is not connected");
+        return FALSE;
+    }
+
+    /* Save address of callback */
+    l2cb.p_echo_data_cb = p_callback;
+
+    /* Set the pointer to the beginning of the data */
+    pp = (UINT8 *)(p_data + 1) + p_data->offset;
+    l2cu_adj_id(p_lcb, L2CAP_ADJ_BRCM_ID);  /* Make sure not using Broadcom ID */
+    l2cu_send_peer_echo_req (p_lcb, pp, p_data->len);
+
+    return (TRUE);
+
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetIdleTimeout
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a connection, or for all future connections. The "idle timeout"
+**                  is the amount of time that a connection can remain up with
+**                  no L2CAP channels on it. A timeout of zero means that the
+**                  connection will be torn down immediately when the last channel
+**                  is removed. A timeout of 0xFFFF means no timeout. Values are
+**                  in seconds.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+** NOTE             This timeout takes effect after at least 1 channel has been
+**                  established and removed. L2CAP maintains its own timer from
+**                  whan a connection is established till the first channel is
+**                  set up.
+*******************************************************************************/
+BOOLEAN L2CA_SetIdleTimeout (UINT16 cid, UINT16 timeout, BOOLEAN is_global)
+{
+    tL2C_CCB        *p_ccb;
+    tL2C_LCB        *p_lcb;
+
+    if (is_global)
+    {
+        l2cb.idle_timeout = timeout;
+    }
+    else
+    {
+        /* Find the channel control block. We don't know the link it is on. */
+        if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+        {
+            L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_SetIdleTimeout, CID: %d", cid);
+            return (FALSE);
+        }
+
+        p_lcb = p_ccb->p_lcb;
+
+        if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
+            p_lcb->idle_timeout = timeout;
+        else
+            return (FALSE);
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetIdleTimeoutByBdAddr
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a connection. The "idle timeout" is the amount of time that
+**                  a connection can remain up with no L2CAP channels on it.
+**                  A timeout of zero means that the connection will be torn
+**                  down immediately when the last channel is removed.
+**                  A timeout of 0xFFFF means no timeout. Values are in seconds.
+**                  A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
+**                  then the idle timeouts for all active l2cap links will be
+**                  changed.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+** NOTE             This timeout applies to all logical channels active on the
+**                  ACL link.
+*******************************************************************************/
+BOOLEAN L2CA_SetIdleTimeoutByBdAddr(BD_ADDR bd_addr, UINT16 timeout)
+{
+    tL2C_LCB        *p_lcb;
+
+    if (memcmp (BT_BD_ANY, bd_addr, BD_ADDR_LEN))
+    {
+        p_lcb = l2cu_find_lcb_by_bd_addr( bd_addr );
+        if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
+            p_lcb->idle_timeout = timeout;
+        else
+            return (FALSE);
+    }
+    else
+    {
+        int         xx;
+        tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+        {
+            if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
+            {
+                p_lcb->idle_timeout = timeout;
+            }
+        }
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetTraceLevel
+**
+** Description      This function sets the trace level for L2CAP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 L2CA_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        l2cb.l2cap_trace_level = new_level;
+
+    return (l2cb.l2cap_trace_level);
+}
+
+
+/*******************************************************************************
+**
+** Function     L2CA_SetDesireRole
+**
+** Description  This function sets the desire role for L2CAP.
+**              If the new role is L2CAP_ROLE_ALLOW_SWITCH, allow switch on
+**              HciCreateConnection.
+**              If the new role is L2CAP_ROLE_DISALLOW_SWITCH, do not allow switch on
+**              HciCreateConnection.
+**
+**              If the new role is a valid role (HCI_ROLE_MASTER or HCI_ROLE_SLAVE),
+**              the desire role is set to the new value. Otherwise, it is not changed.
+**
+** Returns      the new (current) role
+**
+*******************************************************************************/
+UINT8 L2CA_SetDesireRole (UINT8 new_role)
+{
+    L2CAP_TRACE_API2 ("L2CA_SetDesireRole() new:x%x, disallow_switch:%d",
+        new_role, l2cb.disallow_switch);
+
+    if (L2CAP_ROLE_CHECK_SWITCH != (L2CAP_ROLE_CHECK_SWITCH & new_role))
+    {
+        /* do not process the allow_switch when both bits are set */
+        if (new_role & L2CAP_ROLE_ALLOW_SWITCH)
+        {
+            l2cb.disallow_switch = FALSE;
+        }
+        if (new_role & L2CAP_ROLE_DISALLOW_SWITCH)
+        {
+            l2cb.disallow_switch = TRUE;
+        }
+    }
+
+    if (new_role == HCI_ROLE_MASTER || new_role == HCI_ROLE_SLAVE)
+        l2cb.desire_role = new_role;
+
+    return (l2cb.desire_role);
+}
+
+/*******************************************************************************
+**
+** Function     L2CA_LocalLoopbackReq
+**
+** Description  This function sets up a CID for local loopback
+**
+** Returns      CID of 0 if none.
+**
+*******************************************************************************/
+UINT16 L2CA_LocalLoopbackReq (UINT16 psm, UINT16 handle, BD_ADDR p_bd_addr)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+
+    L2CAP_TRACE_API2 ("L2CA_LocalLoopbackReq()  PSM: %d  Handle: 0x%04x", psm, handle);
+
+    /* Fail if we have not established communications with the controller */
+    if (!BTM_IsDeviceUp())
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP loop req - BTU not ready");
+        return (0);
+    }
+
+    /* Fail if the PSM is not registered */
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no RCB for L2CA_conn_req, PSM: %d", psm);
+        return (0);
+    }
+
+    if ((p_lcb = l2cu_allocate_lcb (p_bd_addr, FALSE)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no LCB for L2CA_conn_req");
+        return (0);
+    }
+
+    p_lcb->link_state = LST_CONNECTED;
+    p_lcb->handle     = handle;
+
+    /* Allocate a channel control block */
+    if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no CCB for L2CA_conn_req");
+        return (0);
+    }
+
+    /* Save registration info */
+    p_ccb->p_rcb        = p_rcb;
+    p_ccb->chnl_state   = CST_OPEN;
+    p_ccb->remote_cid   = p_ccb->local_cid;
+    p_ccb->config_done  = CFG_DONE_MASK;
+
+    /* Return the local CID as our handle */
+    return (p_ccb->local_cid);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetAclPriority
+**
+** Description      Sets the transmission priority for a channel.
+**                  (For initial implementation only two values are valid.
+**                  L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_SetAclPriority (BD_ADDR bd_addr, UINT8 priority)
+{
+    L2CAP_TRACE_API6 ("L2CA_SetAclPriority()  bdaddr: %02x%02x%02x%02x%04x, priority:%d",
+                    bd_addr[0], bd_addr[1], bd_addr[2],
+                    bd_addr[3], (bd_addr[4] << 8) + bd_addr[5], priority);
+
+    return (l2cu_set_acl_priority(bd_addr, priority, FALSE));
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_FlowControl
+**
+** Description      Higher layers call this function to flow control a channel.
+**
+**                  data_enabled - TRUE data flows, FALSE data is stopped
+**
+** Returns          TRUE if valid channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_FlowControl (UINT16 cid, BOOLEAN data_enabled)
+{
+    tL2C_CCB  *p_ccb;
+    BOOLEAN   on_off = !data_enabled;
+
+    L2CAP_TRACE_API2 ("L2CA_FlowControl(%d)  CID: 0x%04x", on_off, cid);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CAP - no CCB for L2CA_FlowControl, CID: 0x%04x  data_enabled: %d", cid, data_enabled);
+        return (FALSE);
+    }
+
+    if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE)
+    {
+        L2CAP_TRACE_EVENT1 ("L2CA_FlowControl()  invalid mode:%d", p_ccb->peer_cfg.fcr.mode);
+        return (FALSE);
+    }
+    if (p_ccb->fcrb.local_busy != on_off)
+    {
+        p_ccb->fcrb.local_busy = on_off;
+
+        if ( (p_ccb->chnl_state == CST_OPEN) && (!p_ccb->fcrb.wait_ack) )
+        {
+            if (on_off)
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, 0);
+            else
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_P_BIT);
+        }
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SendTestSFrame
+**
+** Description      Higher layers call this function to send a test S-frame.
+**
+** Returns          TRUE if valid Channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_SendTestSFrame (UINT16 cid, UINT8 sup_type, UINT8 back_track)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API3 ("L2CA_SendTestSFrame()  CID: 0x%04x  Type: 0x%02x  back_track: %u", cid, sup_type, back_track);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_SendTestSFrame, CID: %d", cid);
+        return (FALSE);
+    }
+
+    if ( (p_ccb->chnl_state != CST_OPEN) || (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) )
+        return (FALSE);
+
+    p_ccb->fcrb.next_seq_expected -= back_track;
+
+    l2c_fcr_send_S_frame (p_ccb, (UINT16)(sup_type & 3), (UINT16)(sup_type & (L2CAP_FCR_P_BIT | L2CAP_FCR_F_BIT)));
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_SetTxPriority
+**
+** Description      Sets the transmission priority for a channel.
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_SetTxPriority (UINT16 cid, tL2CAP_CHNL_PRIORITY priority)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API2 ("L2CA_SetTxPriority()  CID: 0x%04x, priority:%d", cid, priority);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_SetTxPriority, CID: %d", cid);
+        return (FALSE);
+    }
+
+    /* it will update the order of CCB in LCB by priority and update round robin service variables */
+    l2cu_change_pri_ccb (p_ccb, priority);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetChnlDataRate
+**
+** Description      Sets the tx/rx data rate for a channel.
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_SetChnlDataRate (UINT16 cid, tL2CAP_CHNL_DATA_RATE tx, tL2CAP_CHNL_DATA_RATE rx)
+{
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API3 ("L2CA_SetChnlDataRate()  CID: 0x%04x, tx:%d, rx:%d", cid, tx, rx);
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_SetChnlDataRate, CID: %d", cid);
+        return (FALSE);
+    }
+
+    p_ccb->tx_data_rate = tx;
+    p_ccb->rx_data_rate = rx;
+
+    /* Adjust channel buffer allocation */
+    l2c_link_adjust_chnl_allocation ();
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetFlushTimeout
+**
+** Description      This function set the automatic flush time out in Baseband
+**                  for ACL-U packets.
+**                  BdAddr : the remote BD address of ACL link. If it is BT_DB_ANY
+**                           then the flush time out will be applied to all ACL link.
+**                  FlushTimeout: flush time out in ms
+**                           0x0000 : No automatic flush
+**                           L2CAP_NO_RETRANSMISSION : No retransmission
+**                           0x0002 - 0xFFFE : flush time out, if (flush_tout*8)+3/5)
+**                                    <= HCI_MAX_AUTO_FLUSH_TOUT (in 625us slot).
+**                                    Otherwise, return FALSE.
+**                           L2CAP_NO_AUTOMATIC_FLUSH : No automatic flush
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+** NOTE             This flush timeout applies to all logical channels active on the
+**                  ACL link.
+*******************************************************************************/
+BOOLEAN L2CA_SetFlushTimeout (BD_ADDR bd_addr, UINT16 flush_tout)
+{
+    tL2C_LCB    *p_lcb;
+    UINT16      hci_flush_to;
+    UINT32      temp;
+
+    /* no automatic flush (infinite timeout) */
+    if (flush_tout == 0x0000)
+    {
+        hci_flush_to = flush_tout;
+        flush_tout   = L2CAP_NO_AUTOMATIC_FLUSH;
+    }
+    /* no retransmission */
+    else if (flush_tout == L2CAP_NO_RETRANSMISSION)
+    {
+        /* not mandatory range for controller */
+        /* Packet is flushed before getting any ACK/NACK */
+        /* To do this, flush timeout should be 1 baseband slot */
+        hci_flush_to = flush_tout;
+    }
+    /* no automatic flush (infinite timeout) */
+    else if (flush_tout == L2CAP_NO_AUTOMATIC_FLUSH)
+    {
+        hci_flush_to = 0x0000;
+    }
+    else
+    {
+        /* convert L2CAP flush_to to 0.625 ms units, with round */
+        temp = (((UINT32)flush_tout * 8) + 3) / 5;
+
+        /* if L2CAP flush_to within range of HCI, set HCI flush timeout */
+        if (temp > HCI_MAX_AUTO_FLUSH_TOUT)
+        {
+            L2CAP_TRACE_WARNING1("WARNING L2CA_SetFlushTimeout timeout(0x%x) is out of range", flush_tout);
+            return FALSE;
+        }
+        else
+        {
+            hci_flush_to = (UINT16)temp;
+        }
+    }
+
+    if (memcmp (BT_BD_ANY, bd_addr, BD_ADDR_LEN))
+    {
+        p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr);
+
+        if ((p_lcb) && (p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
+        {
+            if (p_lcb->link_flush_tout != flush_tout)
+            {
+                p_lcb->link_flush_tout = flush_tout;
+
+                L2CAP_TRACE_API4 ("L2CA_SetFlushTimeout 0x%04x ms for bd_addr [...;%02x%02x%02x]",
+                                  flush_tout, bd_addr[3], bd_addr[4], bd_addr[5]);
+
+                if (!btsnd_hcic_write_auto_flush_tout (p_lcb->handle, hci_flush_to))
+                    return (FALSE);
+            }
+        }
+        else
+        {
+            L2CAP_TRACE_WARNING3 ("WARNING L2CA_SetFlushTimeout No lcb for bd_addr [...;%02x%02x%02x]",
+                                  bd_addr[3], bd_addr[4], bd_addr[5]);
+            return (FALSE);
+        }
+    }
+    else
+    {
+        int   xx;
+        p_lcb = &l2cb.lcb_pool[0];
+
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+        {
+            if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTED))
+            {
+                if (p_lcb->link_flush_tout != flush_tout)
+                {
+                    p_lcb->link_flush_tout = flush_tout;
+
+                    L2CAP_TRACE_API4 ("L2CA_SetFlushTimeout 0x%04x ms for bd_addr [...;%02x%02x%02x]",
+                                      flush_tout, p_lcb->remote_bd_addr[3],
+                                      p_lcb->remote_bd_addr[4], p_lcb->remote_bd_addr[5]);
+
+                    if (!btsnd_hcic_write_auto_flush_tout(p_lcb->handle, hci_flush_to))
+                        return (FALSE);
+                }
+            }
+        }
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetPeerFeatures
+**
+**  Description      Get a peers features and fixed channel map
+**
+**  Parameters:      BD address of the peer
+**                   Pointers to features and channel mask storage area
+**
+**  Return value:    TRUE if peer is connected
+**
+*******************************************************************************/
+BOOLEAN L2CA_GetPeerFeatures (BD_ADDR bd_addr, UINT32 *p_ext_feat, UINT8 *p_chnl_mask)
+{
+    tL2C_LCB        *p_lcb;
+
+    /* We must already have a link to the remote */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr)) == NULL)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CA_GetPeerFeatures() No BDA: %08x%04x",
+                              (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                              (bd_addr[4]<<8)+bd_addr[5]);
+        return (FALSE);
+    }
+
+    L2CAP_TRACE_API4 ("L2CA_GetPeerFeatures() BDA: %08x%04x  ExtFea: 0x%08x  Chnl_Mask[0]: 0x%02x",
+                      (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8)+bd_addr[3],
+                      (bd_addr[4]<<8)+bd_addr[5], p_lcb->peer_ext_fea, p_lcb->peer_chnl_mask[0]);
+
+    *p_ext_feat = p_lcb->peer_ext_fea;
+
+    memcpy (p_chnl_mask, p_lcb->peer_chnl_mask, L2CAP_FIXED_CHNL_ARRAY_SIZE);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetBDAddrbyHandle
+**
+**  Description      Get BD address for the given HCI handle
+**
+**  Parameters:      HCI handle
+**                   BD address of the peer
+**
+**  Return value:    TRUE if found lcb for the given handle, FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN L2CA_GetBDAddrbyHandle (UINT16 handle, BD_ADDR bd_addr)
+{
+    tL2C_LCB *p_lcb = NULL;
+    BOOLEAN found_dev = FALSE;
+
+    p_lcb = l2cu_find_lcb_by_handle (handle);
+    if (p_lcb)
+    {
+        found_dev = TRUE;
+        memcpy (bd_addr, p_lcb->remote_bd_addr, BD_ADDR_LEN);
+    }
+
+    return found_dev;
+}
+
+/*******************************************************************************
+**
+**  Function         L2CA_GetChnlFcrMode
+**
+**  Description      Get the channel FCR mode
+**
+**  Parameters:      Local CID
+**
+**  Return value:    Channel mode
+**
+*******************************************************************************/
+UINT8 L2CA_GetChnlFcrMode (UINT16 lcid)
+{
+    tL2C_CCB    *p_ccb = l2cu_find_ccb_by_cid (NULL, lcid);
+
+    if (p_ccb)
+    {
+        L2CAP_TRACE_API1 ("L2CA_GetChnlFcrMode() returns mode %d", p_ccb->peer_cfg.fcr.mode);
+        return (p_ccb->peer_cfg.fcr.mode);
+    }
+
+    L2CAP_TRACE_API0 ("L2CA_GetChnlFcrMode() returns mode L2CAP_FCR_BASIC_MODE");
+    return (L2CAP_FCR_BASIC_MODE);
+}
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+/*******************************************************************************
+**
+**  Function        L2CA_RegisterFixedChannel
+**
+**  Description     Register a fixed channel.
+**
+**  Parameters:     Fixed Channel #
+**                  Channel Callbacks and config
+**
+**  Return value:   -
+**
+*******************************************************************************/
+BOOLEAN  L2CA_RegisterFixedChannel (UINT16 fixed_cid, tL2CAP_FIXED_CHNL_REG *p_freg)
+{
+    if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL) )
+    {
+        L2CAP_TRACE_ERROR1 ("L2CA_RegisterFixedChannel()  Invalid CID: 0x%04x", fixed_cid);
+
+        return (FALSE);
+    }
+
+    l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = *p_freg;
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_ConnectFixedChnl
+**
+**  Description     Connect an fixed signalling channel to a remote device.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**
+**  Return value:   TRUE if connection started
+**
+*******************************************************************************/
+BOOLEAN L2CA_ConnectFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda)
+{
+    tL2C_LCB        *p_lcb;
+#if BLE_INCLUDED == TRUE
+    UINT16          reason;
+#endif
+
+    L2CAP_TRACE_API3  ("L2CA_ConnectFixedChnl()  CID: 0x%04x  BDA: %08x%04x", fixed_cid,
+                    (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* Check CID is valid and registered */
+    if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL)
+     ||  (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) )
+    {
+        L2CAP_TRACE_ERROR1 ("L2CA_ConnectFixedChnl()  Invalid CID: 0x%04x", fixed_cid);
+        return (FALSE);
+    }
+
+    /* Fail if BT is not yet up */
+    if (!BTM_IsDeviceUp())
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_ConnectFixedChnl(0x%04x) - BTU not ready", fixed_cid);
+        return (FALSE);
+    }
+
+    /* If we already have a link to the remote, check if it supports that CID */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) != NULL)
+    {
+        if (!(p_lcb->peer_chnl_mask[0] & (1 << fixed_cid)))
+        {
+            L2CAP_TRACE_EVENT3  ("L2CA_ConnectFixedChnl()  CID: 0x%04x  BDA: %08x%04x not supported", fixed_cid,
+                                (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+            return (FALSE);
+        }
+        /* Get a CCB and link the lcb to it */
+        if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+        {
+            L2CAP_TRACE_WARNING1 ("L2CA_ConnectFixedChnl(0x%04x) - LCB but no CCB", fixed_cid);
+            return (FALSE);
+        }
+#if BLE_INCLUDED == TRUE
+        reason = (p_lcb->is_ble_link) ? 1: 0;
+        (*l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, TRUE, reason);
+#else
+        (*l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, TRUE, 0);
+#endif
+        return (TRUE);
+    }
+
+    /* No link. Get an LCB and start link establishment */
+    if ((p_lcb = l2cu_allocate_lcb (rem_bda, FALSE)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_ConnectFixedChnl(0x%04x) - no LCB", fixed_cid);
+        return (FALSE);
+    }
+
+    /* Get a CCB and link the lcb to it */
+    if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+    {
+        p_lcb->disc_reason = L2CAP_CONN_NO_RESOURCES;
+        L2CAP_TRACE_WARNING1 ("L2CA_ConnectFixedChnl(0x%04x) - no CCB", fixed_cid);
+        l2cu_release_lcb (p_lcb);
+        return (FALSE);
+    }
+
+    return (l2cu_create_conn(p_lcb));
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_SendFixedChnlData
+**
+**  Description     Write data on a fixed channel.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**                  Pointer to buffer of type BT_HDR
+**
+** Return value     L2CAP_DW_SUCCESS, if data accepted
+**                  L2CAP_DW_FAILED,  if error
+**
+*******************************************************************************/
+UINT16 L2CA_SendFixedChnlData (UINT16 fixed_cid, BD_ADDR rem_bda, BT_HDR *p_buf)
+{
+    tL2C_LCB        *p_lcb;
+
+    L2CAP_TRACE_API3 ("L2CA_SendFixedChnlData()  CID: 0x%04x  BDA: %08x%04x", fixed_cid,
+                     (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* Check CID is valid and registered */
+    if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL)
+     ||  (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) )
+    {
+        L2CAP_TRACE_ERROR1 ("L2CA_SendFixedChnlData()  Invalid CID: 0x%04x", fixed_cid);
+        return (L2CAP_DW_FAILED);
+    }
+
+    /* Fail if BT is not yet up */
+    if (!BTM_IsDeviceUp())
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_SendFixedChnlData(0x%04x) - BTU not ready", fixed_cid);
+        return (L2CAP_DW_FAILED);
+    }
+
+    /* We need to have a link up */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_SendFixedChnlData(0x%04x) - no LCB", fixed_cid);
+        return (L2CAP_DW_FAILED);
+    }
+
+    if ((p_lcb->peer_chnl_mask[0] & (1 << fixed_cid)) == 0)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_SendFixedChnlData() - peer does not support fixed chnl: 0x%04x", fixed_cid);
+        return (L2CAP_DW_FAILED);
+    }
+
+    p_buf->event = 0;
+    p_buf->layer_specific = L2CAP_FLUSHABLE_CH_BASED;
+
+    if (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL])
+    {
+        if (!l2cu_initialize_fixed_ccb (p_lcb, fixed_cid, &l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+        {
+            L2CAP_TRACE_WARNING1 ("L2CA_SendFixedChnlData() - no CCB for chnl: 0x%4x", fixed_cid);
+            return (L2CAP_DW_FAILED);
+        }
+    }
+
+    l2c_enqueue_peer_data (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL], p_buf);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, NULL);
+
+    /* If there is no dynamic CCB on the link, restart the idle timer each time something is sent */
+    if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED && !p_lcb->ccb_queue.p_first_ccb)
+    {
+        l2cu_no_dynamic_ccbs (p_lcb);
+    }
+
+    return (L2CAP_DW_SUCCESS);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_RemoveFixedChnl
+**
+**  Description     Remove a fixed channel to a remote device.
+**
+**  Parameters:     Fixed CID
+**                  BD Address of remote
+**                  Idle timeout to use (or 0xFFFF if don't care)
+**
+**  Return value:   TRUE if channel removed
+**
+*******************************************************************************/
+BOOLEAN L2CA_RemoveFixedChnl (UINT16 fixed_cid, BD_ADDR rem_bda)
+{
+    tL2C_LCB    *p_lcb;
+    tL2C_CCB    *p_ccb;
+
+    /* Check CID is valid and registered */
+    if ( (fixed_cid < L2CAP_FIRST_FIXED_CHNL) || (fixed_cid > L2CAP_LAST_FIXED_CHNL)
+     ||  (l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb == NULL) )
+    {
+        L2CAP_TRACE_ERROR1 ("L2CA_RemoveFixedChnl()  Invalid CID: 0x%04x", fixed_cid);
+        return (FALSE);
+    }
+
+    /* Is a fixed channel connected to the remote BDA ?*/
+    p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda);
+    if ( ((p_lcb) == NULL) || (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) )
+    {
+        L2CAP_TRACE_WARNING3 ("L2CA_RemoveFixedChnl()  CID: 0x%04x  BDA: %08x%04x not connected", fixed_cid,
+                             (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+        return (FALSE);
+    }
+
+    L2CAP_TRACE_API3 ("L2CA_RemoveFixedChnl()  CID: 0x%04x  BDA: %08x%04x", fixed_cid,
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* Release the CCB, starting an inactivity timeout on the LCB if no other CCBs exist */
+    p_ccb = p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL];
+
+    p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = NULL;
+    p_lcb->disc_reason = HCI_ERR_CONN_CAUSE_LOCAL_HOST;
+    l2cu_release_ccb (p_ccb);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetFixedChannelTout
+**
+** Description      Higher layers call this function to set the idle timeout for
+**                  a fixed channel. The "idle timeout" is the amount of time that
+**                  a connection can remain up with no L2CAP channels on it.
+**                  A timeout of zero means that the connection will be torn
+**                  down immediately when the last channel is removed.
+**                  A timeout of 0xFFFF means no timeout. Values are in seconds.
+**                  A bd_addr is the remote BD address. If bd_addr = BT_BD_ANY,
+**                  then the idle timeouts for all active l2cap links will be
+**                  changed.
+**
+** Returns          TRUE if command succeeded, FALSE if failed
+**
+*******************************************************************************/
+BOOLEAN L2CA_SetFixedChannelTout (BD_ADDR rem_bda, UINT16 fixed_cid, UINT16 idle_tout)
+{
+    tL2C_LCB        *p_lcb;
+
+    /* Is a fixed channel connected to the remote BDA ?*/
+    p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda);
+    if ( ((p_lcb) == NULL) || (!p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]) )
+    {
+        L2CAP_TRACE_WARNING3 ("L2CA_SetFixedChannelTout()  CID: 0x%04x  BDA: %08x%04x not connected", fixed_cid,
+                             (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+        return (FALSE);
+    }
+
+    p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL]->fixed_chnl_idle_tout = idle_tout;
+
+    if (p_lcb->in_use && p_lcb->link_state == LST_CONNECTED && !p_lcb->ccb_queue.p_first_ccb)
+    {
+        /* If there are no dynamic CCBs, (re)start the idle timer in case we changed it */
+        l2cu_no_dynamic_ccbs (p_lcb);
+    }
+
+    return (TRUE);
+}
+
+#endif /* #if (L2CAP_NUM_FIXED_CHNLS > 0) */
+
+/*******************************************************************************
+**
+** Function     L2CA_GetCurrentConfig
+**
+** Description  This function returns configurations of L2CAP channel
+**              pp_our_cfg : pointer of our saved configuration options
+**              p_our_cfg_bits : valid config in bitmap
+**              pp_peer_cfg: pointer of peer's saved configuration options
+**              p_peer_cfg_bits : valid config in bitmap
+**
+** Returns      TRUE if successful
+**
+*******************************************************************************/
+BOOLEAN L2CA_GetCurrentConfig (UINT16 lcid,
+                               tL2CAP_CFG_INFO **pp_our_cfg,  tL2CAP_CH_CFG_BITS *p_our_cfg_bits,
+                               tL2CAP_CFG_INFO **pp_peer_cfg, tL2CAP_CH_CFG_BITS *p_peer_cfg_bits)
+{
+    tL2C_CCB    *p_ccb;
+
+    L2CAP_TRACE_API1 ("L2CA_GetCurrentConfig()  CID: 0x%04x", lcid);
+
+    p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
+
+    if (p_ccb)
+    {
+        *pp_our_cfg  = &(p_ccb->our_cfg);
+
+        /* convert valid config items into bitmap */
+        *p_our_cfg_bits = 0;
+        if (p_ccb->our_cfg.mtu_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_MTU;
+        if (p_ccb->our_cfg.qos_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_QOS;
+        if (p_ccb->our_cfg.flush_to_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FLUSH_TO;
+        if (p_ccb->our_cfg.fcr_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCR;
+        if (p_ccb->our_cfg.fcs_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_FCS;
+        if (p_ccb->our_cfg.ext_flow_spec_present)
+            *p_our_cfg_bits |= L2CAP_CH_CFG_MASK_EXT_FLOW_SPEC;
+
+        *pp_peer_cfg = &(p_ccb->peer_cfg);
+        *p_peer_cfg_bits = p_ccb->peer_cfg_bits;
+
+        return TRUE;
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR1 ("No CCB for CID:0x%04x", lcid);
+        return FALSE;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_RegForNoCPEvt
+**
+** Description      Register callback for Number of Completed Packets event.
+**
+** Input Param      p_cb - callback for Number of completed packets event
+**                  p_bda - BT address of remote device
+**
+** Returns          TRUE if registered OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_RegForNoCPEvt(tL2CA_NOCP_CB *p_cb, BD_ADDR p_bda)
+{
+    tL2C_LCB        *p_lcb;
+
+    /* Find the link that is associated with this remote bdaddr */
+    p_lcb = l2cu_find_lcb_by_bd_addr (p_bda);
+
+    /* If no link for this handle, nothing to do. */
+    if (!p_lcb)
+        return FALSE;
+
+    p_lcb->p_nocp_cb = p_cb;
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_DataWrite
+**
+** Description      Higher layers call this function to write data.
+**
+** Returns          L2CAP_DW_SUCCESS, if data accepted, else FALSE
+**                  L2CAP_DW_CONGESTED, if data accepted and the channel is congested
+**                  L2CAP_DW_FAILED, if error
+**
+*******************************************************************************/
+UINT8 L2CA_DataWrite (UINT16 cid, BT_HDR *p_data)
+{
+    L2CAP_TRACE_API2 ("L2CA_DataWrite()  CID: 0x%04x  Len: %d", cid, p_data->len);
+    return l2c_data_write (cid, p_data, L2CAP_FLUSHABLE_CH_BASED);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_SetChnlFlushability
+**
+** Description      Higher layers call this function to set a channels
+**                  flushability flags
+**
+** Returns          TRUE if CID found, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_SetChnlFlushability (UINT16 cid, BOOLEAN is_flushable)
+{
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+
+    tL2C_CCB        *p_ccb;
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_SetChnlFlushability, CID: %d", cid);
+        return (FALSE);
+    }
+
+    p_ccb->is_flushable = is_flushable;
+
+    L2CAP_TRACE_API2 ("L2CA_SetChnlFlushability()  CID: 0x%04x  is_flushable: %d", cid, is_flushable);
+
+#endif
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_DataWriteEx
+**
+** Description      Higher layers call this function to write data with extended
+**                  flags.
+**                  flags : L2CAP_FLUSHABLE_CH_BASED
+**                          L2CAP_FLUSHABLE_PKT
+**                          L2CAP_NON_FLUSHABLE_PKT
+**
+** Returns          L2CAP_DW_SUCCESS, if data accepted, else FALSE
+**                  L2CAP_DW_CONGESTED, if data accepted and the channel is congested
+**                  L2CAP_DW_FAILED, if error
+**
+*******************************************************************************/
+UINT8 L2CA_DataWriteEx (UINT16 cid, BT_HDR *p_data, UINT16 flags)
+{
+    L2CAP_TRACE_API3 ("L2CA_DataWriteEx()  CID: 0x%04x  Len: %d Flags:0x%04X",
+                       cid, p_data->len, flags);
+    return l2c_data_write (cid, p_data, flags);
+}
+
+/*******************************************************************************
+**
+** Function     L2CA_FlushChannel
+**
+** Description  This function flushes none, some or all buffers queued up
+**              for xmission for a particular CID. If called with
+**              L2CAP_FLUSH_CHANS_GET (0), it simply returns the number
+**              of buffers queued for that CID L2CAP_FLUSH_CHANS_ALL (0xffff)
+**              flushes all buffers.  All other values specifies the maximum
+**              buffers to flush.
+**
+** Returns      Number of buffers left queued for that CID
+**
+*******************************************************************************/
+UINT16 L2CA_FlushChannel (UINT16 lcid, UINT16 num_to_flush)
+{
+    tL2C_CCB        *p_ccb;
+    tL2C_LCB        *p_lcb;
+    UINT16          num_left = 0,
+                    num_flushed1 = 0,
+                    num_flushed2 = 0;
+    BT_HDR          *p_buf1, *p_buf;
+
+    p_ccb = l2cu_find_ccb_by_cid(NULL, lcid);
+
+    if ( !p_ccb || ((p_lcb = p_ccb->p_lcb) == NULL) )
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_FlushChannel()  abnormally returning 0  CID: 0x%04x", lcid);
+        return (0);
+    }
+
+    if (num_to_flush != L2CAP_FLUSH_CHANS_GET)
+    {
+        L2CAP_TRACE_API4 ("L2CA_FlushChannel (FLUSH)  CID: 0x%04x  NumToFlush: %d  QC: %u  pFirst: 0x%08x",
+                           lcid, num_to_flush, p_ccb->xmit_hold_q.count, p_ccb->xmit_hold_q.p_first);
+    }
+    else
+    {
+        L2CAP_TRACE_API1 ("L2CA_FlushChannel (QUERY)  CID: 0x%04x", lcid);
+    }
+
+    /* Cannot flush eRTM buffers once they have a sequence number */
+    if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE)
+    {
+#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE
+        if (num_to_flush != L2CAP_FLUSH_CHANS_GET)
+        {
+            /* If the controller supports enhanced flush, flush the data queued at the controller */
+            if ( (HCI_NON_FLUSHABLE_PB_SUPPORTED(BTM_ReadLocalFeatures ()))
+             && (BTM_GetNumScoLinks() == 0) )
+            {
+                if ( l2cb.is_flush_active == FALSE )
+                {
+                    l2cb.is_flush_active = TRUE;
+
+                    /* The only packet type defined - 0 - Automatically-Flushable Only */
+                    btsnd_hcic_enhanced_flush (p_lcb->handle, 0);
+                }
+            }
+        }
+#endif
+
+        p_buf = (BT_HDR *)p_lcb->link_xmit_data_q.p_first;
+
+        /* First flush the number we are asked to flush */
+        while ((p_buf != NULL) && (num_to_flush != 0))
+        {
+            /* Do not flush other CIDs or partial segments */
+            if ( (p_buf->layer_specific == 0) && (p_buf->event == lcid) )
+            {
+                p_buf1 = p_buf;
+                p_buf = (BT_HDR *)GKI_getnext (p_buf);
+                num_to_flush--;
+                num_flushed1++;
+
+                GKI_remove_from_queue (&p_lcb->link_xmit_data_q, p_buf1);
+                GKI_freebuf (p_buf1);
+            }
+            else
+                p_buf = (BT_HDR *)GKI_getnext (p_buf);
+        }
+    }
+
+    /* If needed, flush buffers in the CCB xmit hold queue */
+    while ( (num_to_flush != 0) && (p_ccb->xmit_hold_q.count != 0) )
+    {
+        p_buf = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_hold_q);
+        if (p_buf)
+            GKI_freebuf (p_buf);
+        num_to_flush--;
+        num_flushed2++;
+    }
+
+    /* If app needs to track all packets, call him */
+    if ( (p_ccb->p_rcb) && (p_ccb->p_rcb->api.pL2CA_TxComplete_Cb) && (num_flushed2) )
+        (*p_ccb->p_rcb->api.pL2CA_TxComplete_Cb)(p_ccb->local_cid, num_flushed2);
+
+    /* Now count how many are left */
+    p_buf = (BT_HDR *)p_lcb->link_xmit_data_q.p_first;
+
+    while (p_buf != NULL)
+    {
+        if (p_buf->event == lcid)
+            num_left++;
+
+        p_buf = (BT_HDR *)GKI_getnext (p_buf);
+    }
+
+    /* Add in the number in the CCB xmit queue */
+    num_left += p_ccb->xmit_hold_q.count;
+
+    /* Return the local number of buffers left for the CID */
+    L2CAP_TRACE_DEBUG3 ("L2CA_FlushChannel()  flushed: %u + %u,  num_left: %u", num_flushed1, num_flushed2, num_left);
+
+    /* If we were congested, and now we are not, tell the app */
+    l2cu_check_channel_congestion (p_ccb);
+
+    return (num_left);
+}
+
diff --git a/stack/l2cap/l2c_ble.c b/stack/l2cap/l2c_ble.c
new file mode 100644
index 0000000..f464ff3
--- /dev/null
+++ b/stack/l2cap/l2c_ble.c
@@ -0,0 +1,599 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains functions relating to BLE management.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bt_target.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "btu.h"
+#include "btm_int.h"
+#include "hcimsgs.h"
+
+#if (BLE_INCLUDED == TRUE)
+
+/*******************************************************************************
+**
+**  Function        L2CA_CancelBleConnectReq
+**
+**  Description     Cancel a pending connection attempt to a BLE device.
+**
+**  Parameters:     BD Address of remote
+**
+**  Return value:   TRUE if connection was cancelled
+**
+*******************************************************************************/
+BOOLEAN L2CA_CancelBleConnectReq (BD_ADDR rem_bda)
+{
+    tL2C_LCB *p_lcb;
+
+    /* There can be only one BLE connection request outstanding at a time */
+    if (!l2cb.is_ble_connecting)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CA_CancelBleConnectReq - no connection pending");
+        return(FALSE);
+    }
+
+    if (memcmp (rem_bda, l2cb.ble_connecting_bda, BD_ADDR_LEN))
+    {
+        L2CAP_TRACE_WARNING4 ("L2CA_CancelBleConnectReq - different  BDA Connecting: %08x%04x  Cancel: %08x%04x",
+                              (l2cb.ble_connecting_bda[0]<<24)+(l2cb.ble_connecting_bda[1]<<16)+(l2cb.ble_connecting_bda[2]<<8)+l2cb.ble_connecting_bda[3],
+                              (l2cb.ble_connecting_bda[4]<<8)+l2cb.ble_connecting_bda[5],
+                              (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+
+        return(FALSE);
+    }
+
+    if (btsnd_hcic_ble_create_conn_cancel())
+    {
+
+        if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) != NULL)
+        {
+            p_lcb->disc_reason = L2CAP_CONN_CANCEL;
+            l2cu_release_lcb (p_lcb);
+        }
+
+        l2cb.is_ble_connecting = FALSE;
+        btm_ble_update_bg_state();
+        btm_ble_resume_bg_conn(NULL, TRUE);
+
+        return(TRUE);
+    }
+    else
+        return(FALSE);
+}
+
+
+/*******************************************************************************
+**
+**  Function        L2CA_UpdateBleConnParams
+**
+**  Description     Update BLE connection parameters.
+**
+**  Parameters:     BD Address of remote
+**
+**  Return value:   TRUE if update started
+**
+*******************************************************************************/
+BOOLEAN L2CA_UpdateBleConnParams (BD_ADDR rem_bda, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout)
+{
+    tL2C_LCB            *p_lcb;
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda);
+
+    /* If we don't have one, create one and accept the connection. */
+    if (!p_lcb)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CA_UpdateBleConnParams - unknown BD_ADDR %08x%04x",
+                              (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+        return(FALSE);
+    }
+
+    if (!p_lcb->is_ble_link)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CA_UpdateBleConnParams - BD_ADDR %08x%04x not LE",
+                              (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+        return(FALSE);
+    }
+
+    if (p_lcb->link_role == HCI_ROLE_MASTER)
+        btsnd_hcic_ble_upd_ll_conn_params (p_lcb->handle, min_int, max_int, latency, timeout, 0, 0);
+    else
+        l2cu_send_peer_ble_par_req (p_lcb, min_int, max_int, latency, timeout);
+
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+**  Function        L2CA_EnableUpdateBleConnParams
+**
+**  Description     Enable or disable update based on the request from the peer
+**
+**  Parameters:     BD Address of remote
+**
+**  Return value:   TRUE if update started
+**
+*******************************************************************************/
+BOOLEAN L2CA_EnableUpdateBleConnParams (BD_ADDR rem_bda, BOOLEAN enable)
+{
+    tL2C_LCB            *p_lcb;
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda);
+
+    /* If we don't have one, create one and accept the connection. */
+    if (!p_lcb)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CA_EnableUpdateBleConnParams - unknown BD_ADDR %08x%04x",
+            (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5]);
+        return (FALSE);
+    }
+
+    L2CAP_TRACE_API4 ("L2CA_EnableUpdateBleConnParams - BD_ADDR %08x%04x enable %d current upd state %d",
+        (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5], enable, p_lcb->upd_disabled);
+
+    if (!p_lcb->is_ble_link || (p_lcb->link_role != HCI_ROLE_MASTER))
+    {
+        L2CAP_TRACE_WARNING3 ("L2CA_EnableUpdateBleConnParams - BD_ADDR %08x%04x not LE or not master %d",
+                              (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3], (rem_bda[4]<<8)+rem_bda[5], p_lcb->link_role);
+        return (FALSE);
+    }
+
+    if (enable)
+    {
+        /* application allows to do update, if we were delaying one do it now, otherwise
+        just mark lcb that updates are enabled */
+        if (p_lcb->upd_disabled == UPD_PENDING)
+        {
+            btsnd_hcic_ble_upd_ll_conn_params (p_lcb->handle, p_lcb->min_interval, p_lcb->max_interval,
+                                               p_lcb->latency, p_lcb->timeout, 0, 0);
+            p_lcb->upd_disabled = UPD_UPDATED;
+        }
+        else
+        {
+            p_lcb->upd_disabled = UPD_ENABLED;
+        }
+    }
+    else
+    {
+        /* application requests to disable parameters update.  If parameters are already updated, lets set them
+        up to what has been requested during connection establishement */
+        if (p_lcb->upd_disabled == UPD_UPDATED)
+        {
+            tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_or_alloc_dev (rem_bda);
+
+            btsnd_hcic_ble_upd_ll_conn_params (p_lcb->handle,
+                (UINT16)((p_dev_rec->conn_params.min_conn_int != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.min_conn_int : L2CAP_LE_INT_MIN),
+                (UINT16)((p_dev_rec->conn_params.max_conn_int != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.max_conn_int : L2CAP_LE_INT_MAX),
+                (UINT16)((p_dev_rec->conn_params.slave_latency != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.slave_latency : 0),
+                (UINT16) ((p_dev_rec->conn_params.supervision_tout != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.supervision_tout : L2CAP_LE_TIMEOUT_MAX),
+                0, 0);
+        }
+        p_lcb->upd_disabled = UPD_DISABLED;
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_GetBleConnRole
+**
+** Description      This function returns the connection role.
+**
+** Returns          link role.
+**
+*******************************************************************************/
+UINT8 L2CA_GetBleConnRole (BD_ADDR bd_addr)
+{
+    UINT8       role = HCI_ROLE_UNKNOWN;
+
+    tL2C_LCB *p_lcb;
+
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr)) != NULL)
+        role = p_lcb->link_role;
+
+    return role;
+}
+/*******************************************************************************
+**
+** Function         L2CA_GetDisconnectReason
+**
+** Description      This function returns the disconnect reason code.
+**
+** Returns          disconnect reason
+**
+*******************************************************************************/
+UINT16 L2CA_GetDisconnectReason (BD_ADDR remote_bda)
+{
+    tL2C_LCB            *p_lcb;
+    UINT16              reason = 0;
+
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (remote_bda)) != NULL)
+        reason = p_lcb->disc_reason;
+
+    L2CAP_TRACE_DEBUG1 ("L2CA_GetDisconnectReason=%d ",reason);
+
+    return reason;
+}
+
+/*******************************************************************************
+**
+** Function         l2cble_scanner_conn_comp
+**
+** Description      This function is called when an HCI Connection Complete
+**                  event is received while we are a scanner (so we are master).
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cble_scanner_conn_comp (UINT16 handle, BD_ADDR bda, tBLE_ADDR_TYPE type, UINT16 conn_interval, UINT16 conn_latency, UINT16 conn_timeout)
+{
+    tL2C_LCB            *p_lcb;
+    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_or_alloc_dev (bda);
+
+    L2CAP_TRACE_DEBUG5 ("l2cble_scanner_conn_comp: HANDLE=%d addr_type=%d conn_interval=%d slave_latency=%d supervision_tout=%d",
+                        handle,  type, conn_interval, conn_latency, conn_timeout);
+
+    l2cb.is_ble_connecting = FALSE;
+
+    p_dev_rec->device_type   = BT_DEVICE_TYPE_BLE;
+    p_dev_rec->ble.ble_addr_type = type;
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (bda);
+
+    /* If we don't have one, create one. this is auto connection complete. */
+    if (!p_lcb)
+    {
+        p_lcb = l2cu_allocate_lcb (bda, FALSE);
+        if (!p_lcb)
+        {
+            btm_sec_disconnect (handle, HCI_ERR_NO_CONNECTION);
+            L2CAP_TRACE_ERROR0 ("l2cble_scanner_conn_comp - failed to allocate LCB");
+            return;
+        }
+        else
+        {
+            if (!l2cu_initialize_fixed_ccb (p_lcb, L2CAP_ATT_CID, &l2cb.fixed_reg[L2CAP_ATT_CID - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+            {
+                btm_sec_disconnect (handle, HCI_ERR_NO_CONNECTION);
+                L2CAP_TRACE_WARNING0 ("l2cble_scanner_conn_comp - LCB but no CCB");
+                return ;
+            }
+        }
+    }
+    else if (p_lcb->link_state != LST_CONNECTING)
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP got BLE scanner conn_comp in bad state: %d", p_lcb->link_state);
+        return;
+    }
+    btu_stop_timer(&p_lcb->timer_entry);
+
+    /* Save the handle */
+    p_lcb->handle = handle;
+
+    /* Connected OK. Change state to connected, we were scanning so we are master */
+    p_lcb->link_state = LST_CONNECTED;
+    p_lcb->link_role  = HCI_ROLE_MASTER;
+    p_lcb->is_ble_link = TRUE;
+
+    /* If there are any preferred connection parameters, set them now */
+    if ( (p_dev_rec->conn_params.min_conn_int     >= L2CAP_LE_INT_MIN ) &&
+         (p_dev_rec->conn_params.min_conn_int     <= L2CAP_LE_INT_MAX ) &&
+         (p_dev_rec->conn_params.max_conn_int     >= L2CAP_LE_INT_MIN ) &&
+         (p_dev_rec->conn_params.max_conn_int     <= L2CAP_LE_INT_MAX ) &&
+         (p_dev_rec->conn_params.slave_latency    <= L2CAP_LE_LATENCY_MAX ) &&
+         (p_dev_rec->conn_params.supervision_tout >= L2CAP_LE_TIMEOUT_MIN) &&
+         (p_dev_rec->conn_params.supervision_tout <= L2CAP_LE_TIMEOUT_MAX) &&
+         ((conn_interval < p_dev_rec->conn_params.min_conn_int &&
+          p_dev_rec->conn_params.min_conn_int != BTM_BLE_CONN_PARAM_UNDEF) ||
+          (conn_interval > p_dev_rec->conn_params.max_conn_int) ||
+          (conn_latency > p_dev_rec->conn_params.slave_latency) ||
+          (conn_timeout > p_dev_rec->conn_params.supervision_tout)))
+    {
+        L2CAP_TRACE_ERROR5 ("upd_ll_conn_params: HANDLE=%d min_conn_int=%d max_conn_int=%d slave_latency=%d supervision_tout=%d",
+                            handle, p_dev_rec->conn_params.min_conn_int, p_dev_rec->conn_params.max_conn_int,
+                            p_dev_rec->conn_params.slave_latency, p_dev_rec->conn_params.supervision_tout);
+
+        btsnd_hcic_ble_upd_ll_conn_params (handle,
+                                           p_dev_rec->conn_params.min_conn_int,
+                                           p_dev_rec->conn_params.max_conn_int,
+                                           p_dev_rec->conn_params.slave_latency,
+                                           p_dev_rec->conn_params.supervision_tout,
+                                           0, 0);
+    }
+
+    /* Tell BTM Acl management about the link */
+    btm_acl_created (bda, NULL, p_dev_rec->sec_bd_name, handle, p_lcb->link_role, TRUE);
+
+    if (p_lcb->p_echo_rsp_cb)
+    {
+        L2CAP_TRACE_ERROR0 ("l2cu_send_peer_echo_req");
+        l2cu_send_peer_echo_req (p_lcb, NULL, 0);
+    }
+
+    p_lcb->peer_chnl_mask[0] = L2CAP_FIXED_CHNL_ATT_BIT | L2CAP_FIXED_CHNL_BLE_SIG_BIT | L2CAP_FIXED_CHNL_SMP_BIT;
+
+    l2cu_process_fixed_chnl_resp (p_lcb);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cble_advertiser_conn_comp
+**
+** Description      This function is called when an HCI Connection Complete
+**                  event is received while we are an advertiser (so we are slave).
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cble_advertiser_conn_comp (UINT16 handle, BD_ADDR bda, tBLE_ADDR_TYPE type,
+                                  UINT16 conn_interval, UINT16 conn_latency, UINT16 conn_timeout)
+{
+    tL2C_LCB            *p_lcb;
+    tBTM_SEC_DEV_REC    *p_dev_rec;
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (bda);
+
+    /* If we don't have one, create one and accept the connection. */
+    if (!p_lcb)
+    {
+        p_lcb = l2cu_allocate_lcb (bda, FALSE);
+        if (!p_lcb)
+        {
+            btm_sec_disconnect (handle, HCI_ERR_NO_CONNECTION);
+            L2CAP_TRACE_ERROR0 ("l2cble_advertiser_conn_comp - failed to allocate LCB");
+            return;
+        }
+        else
+        {
+            if (!l2cu_initialize_fixed_ccb (p_lcb, L2CAP_ATT_CID, &l2cb.fixed_reg[L2CAP_ATT_CID - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+            {
+                btm_sec_disconnect (handle, HCI_ERR_NO_CONNECTION);
+                L2CAP_TRACE_WARNING0 ("l2cble_scanner_conn_comp - LCB but no CCB");
+                return ;
+            }
+        }
+    }
+
+    /* Save the handle */
+    p_lcb->handle = handle;
+
+    /* Connected OK. Change state to connected, we were advertising, so we are slave */
+    p_lcb->link_state = LST_CONNECTED;
+    p_lcb->link_role  = HCI_ROLE_SLAVE;
+    p_lcb->is_ble_link = TRUE;
+
+    /* Tell BTM Acl management about the link */
+    p_dev_rec = btm_find_or_alloc_dev (bda);
+
+    p_dev_rec->device_type   = BT_DEVICE_TYPE_BLE;
+    p_dev_rec->ble.ble_addr_type = type;
+
+    btm_acl_created (bda, NULL, p_dev_rec->sec_bd_name, handle, p_lcb->link_role, TRUE);
+
+    p_lcb->peer_chnl_mask[0] = L2CAP_FIXED_CHNL_ATT_BIT | L2CAP_FIXED_CHNL_BLE_SIG_BIT | L2CAP_FIXED_CHNL_SMP_BIT;
+
+    l2cu_process_fixed_chnl_resp (p_lcb);
+}
+
+/*******************************************************************************
+**
+** Function         l2cble_conn_comp
+**
+** Description      This function is called when an HCI Connection Complete
+**                  event is received.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cble_conn_comp(UINT16 handle, UINT8 role, BD_ADDR bda, tBLE_ADDR_TYPE type,
+                      UINT16 conn_interval, UINT16 conn_latency, UINT16 conn_timeout)
+{
+    if (role == HCI_ROLE_MASTER)
+    {
+        l2cble_scanner_conn_comp(handle, bda, type, conn_interval, conn_latency, conn_timeout);
+    }
+    else
+    {
+        l2cble_advertiser_conn_comp(handle, bda, type, conn_interval, conn_latency, conn_timeout);
+    }
+}
+/*******************************************************************************
+**
+** Function         l2cble_process_sig_cmd
+**
+** Description      This function is called when a signalling packet is received
+**                  on the BLE signalling CID
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cble_process_sig_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len)
+{
+    UINT8           *p_pkt_end;
+    UINT8           cmd_code, id;
+    UINT16          cmd_len, rej_reason;
+    UINT16          result;
+    UINT16          min_interval, max_interval, latency, timeout;
+
+    p_pkt_end = p + pkt_len;
+
+    STREAM_TO_UINT8  (cmd_code, p);
+    STREAM_TO_UINT8  (id, p);
+    STREAM_TO_UINT16 (cmd_len, p);
+
+    /* Check command length does not exceed packet length */
+    if ((p + cmd_len) > p_pkt_end)
+    {
+        L2CAP_TRACE_WARNING3 ("L2CAP - LE - format error, pkt_len: %d  cmd_len: %d  code: %d", pkt_len, cmd_len, cmd_code);
+        return;
+    }
+
+    switch (cmd_code)
+    {
+        case L2CAP_CMD_REJECT:
+        case L2CAP_CMD_ECHO_RSP:
+        case L2CAP_CMD_INFO_RSP:
+            STREAM_TO_UINT16 (rej_reason, p);
+            break;
+        case L2CAP_CMD_ECHO_REQ:
+        case L2CAP_CMD_INFO_REQ:
+            l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0);
+            break;
+
+        case L2CAP_CMD_BLE_UPDATE_REQ:
+            STREAM_TO_UINT16 (min_interval, p); /* 0x0006 - 0x0C80 */
+            STREAM_TO_UINT16 (max_interval, p); /* 0x0006 - 0x0C80 */
+            STREAM_TO_UINT16 (latency, p);  /* 0x0000 - 0x03E8 */
+            STREAM_TO_UINT16 (timeout, p);  /* 0x000A - 0x0C80 */
+            /* If we are a master, the slave wants to update the parameters */
+            if (p_lcb->link_role == HCI_ROLE_MASTER)
+            {
+                if (min_interval < L2CAP_LE_INT_MIN || min_interval > L2CAP_LE_INT_MAX ||
+                    max_interval < L2CAP_LE_INT_MIN || max_interval > L2CAP_LE_INT_MAX ||
+                    latency  > L2CAP_LE_LATENCY_MAX ||
+                    /*(timeout >= max_interval && latency > (timeout * 10/(max_interval * 1.25) - 1)) ||*/
+                    timeout < L2CAP_LE_TIMEOUT_MIN || timeout > L2CAP_LE_TIMEOUT_MAX ||
+                    max_interval < min_interval)
+                {
+                    result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+                }
+                else
+                {
+
+                    l2cu_send_peer_ble_par_rsp (p_lcb, L2CAP_CFG_OK, id);
+
+                    p_lcb->min_interval = min_interval;
+                    p_lcb->max_interval = max_interval;
+                    p_lcb->latency = latency;
+                    p_lcb->timeout = timeout;
+
+                    if (p_lcb->upd_disabled == UPD_ENABLED)
+                    {
+                        btsnd_hcic_ble_upd_ll_conn_params (p_lcb->handle, min_interval, max_interval,
+                                                            latency, timeout, 0, 0);
+                        p_lcb->upd_disabled = UPD_UPDATED;
+                    }
+                    else
+                    {
+                        L2CAP_TRACE_EVENT0 ("L2CAP - LE - update currently disabled");
+                        p_lcb->upd_disabled = UPD_PENDING;
+                    }
+                }
+            }
+            else
+                l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0);
+            break;
+
+        case L2CAP_CMD_BLE_UPDATE_RSP:
+            STREAM_TO_UINT16 (result, p);
+            break;
+
+        default:
+            L2CAP_TRACE_WARNING1 ("L2CAP - LE - unknown cmd code: %d", cmd_code);
+            l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0);
+            return;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cble_create_conn
+**
+** Description      This function initiates an acl connection via HCI
+**
+** Returns          TRUE if successful, FALSE if connection not started.
+**
+*******************************************************************************/
+BOOLEAN l2cble_create_conn (tL2C_LCB *p_lcb)
+{
+    tBTM_SEC_DEV_REC    *p_dev_rec = btm_find_or_alloc_dev (p_lcb->remote_bd_addr);
+    tBTM_BLE_CB     *p_cb = &btm_cb.ble_ctr_cb;
+    UINT16          scan_int, scan_win;
+
+    /* There can be only one BLE connection request outstanding at a time */
+    if (l2cb.is_ble_connecting)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - LE - cannot start new connection, already connecting");
+        return(FALSE);
+    }
+
+    p_lcb->link_state      = LST_CONNECTING;
+    l2cb.is_ble_connecting = TRUE;
+
+    memcpy (l2cb.ble_connecting_bda, p_lcb->remote_bd_addr, BD_ADDR_LEN);
+    btm_ble_suspend_bg_conn();
+
+    scan_int = (p_cb->scan_int == BTM_BLE_CONN_PARAM_UNDEF) ? L2CAP_LE_INT_MIN : p_cb->scan_int;
+    scan_win = (p_cb->scan_win == BTM_BLE_CONN_PARAM_UNDEF) ? L2CAP_LE_INT_MIN : p_cb->scan_win;
+
+    if (!btsnd_hcic_ble_create_ll_conn (scan_int,/* UINT16 scan_int      */
+                                        scan_win, /* UINT16 scan_win      */
+                                        FALSE,                   /* UINT8 white_list     */
+                                        p_lcb->ble_addr_type,    /* UINT8 addr_type_peer */
+                                        p_lcb->remote_bd_addr,   /* BD_ADDR bda_peer     */
+                                        BLE_ADDR_PUBLIC,         /* UINT8 addr_type_own  */
+                                        (UINT16) ((p_dev_rec->conn_params.min_conn_int != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.min_conn_int : L2CAP_LE_INT_MIN),  /* UINT16 conn_int_min  */
+                                        (UINT16) ((p_dev_rec->conn_params.max_conn_int != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.max_conn_int : L2CAP_LE_INT_MIN),  /* UINT16 conn_int_max  */
+                                        (UINT16) ((p_dev_rec->conn_params.slave_latency != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.slave_latency : 0), /* UINT16 conn_latency  */
+                                        (UINT16) ((p_dev_rec->conn_params.supervision_tout != BTM_BLE_CONN_PARAM_UNDEF) ? p_dev_rec->conn_params.supervision_tout : L2CAP_LE_TIMEOUT_MAX), /* UINT16 conn_timeout  */
+                                        0,                       /* UINT16 min_len       */
+                                        0))                      /* UINT16 max_len       */
+    {
+        /* No buffer for connection request ? */
+        l2cb.is_ble_connecting = FALSE;
+        p_lcb->disc_reason = L2CAP_CONN_NO_RESOURCES;
+        l2cu_release_lcb (p_lcb);
+        return(FALSE);
+    }
+    else
+        btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_BLE_LINK_CONNECT_TOUT);
+
+    return(TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_processs_ble_num_bufs
+**
+** Description      This function is called when a "controller buffer size"
+**                  event is first received from the controller. It updates
+**                  the L2CAP values.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_processs_ble_num_bufs (UINT16 num_lm_ble_bufs)
+{
+    l2cb.num_lm_ble_bufs = l2cb.controller_le_xmit_window = num_lm_ble_bufs;
+}
+
+#endif /* (BLE_INCLUDED == TRUE) */
diff --git a/stack/l2cap/l2c_csm.c b/stack/l2cap/l2c_csm.c
new file mode 100644
index 0000000..0d04d8a
--- /dev/null
+++ b/stack/l2cap/l2c_csm.c
@@ -0,0 +1,1333 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the L2CAP channel state machine
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "btm_int.h"
+#include "btu.h"
+#include "hcimsgs.h"
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void l2c_csm_closed (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_orig_w4_sec_comp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_term_w4_sec_comp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_w4_l2cap_connect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_w4_l2ca_connect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_config (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_open (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_w4_l2cap_disconnect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+static void l2c_csm_w4_l2ca_disconnect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+
+#if (BT_TRACE_VERBOSE == TRUE)
+static char *l2c_csm_get_event_name (UINT16 event);
+#endif
+
+/*******************************************************************************
+**
+** Function         l2c_csm_execute
+**
+** Description      This function executes the state machine.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_csm_execute (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    switch (p_ccb->chnl_state)
+    {
+    case CST_CLOSED:
+        l2c_csm_closed (p_ccb, event, p_data);
+        break;
+
+    case CST_ORIG_W4_SEC_COMP:
+        l2c_csm_orig_w4_sec_comp (p_ccb, event, p_data);
+        break;
+
+    case CST_TERM_W4_SEC_COMP:
+        l2c_csm_term_w4_sec_comp (p_ccb, event, p_data);
+        break;
+
+    case CST_W4_L2CAP_CONNECT_RSP:
+        l2c_csm_w4_l2cap_connect_rsp (p_ccb, event, p_data);
+        break;
+
+    case CST_W4_L2CA_CONNECT_RSP:
+        l2c_csm_w4_l2ca_connect_rsp (p_ccb, event, p_data);
+        break;
+
+    case CST_CONFIG:
+        l2c_csm_config (p_ccb, event, p_data);
+        break;
+
+    case CST_OPEN:
+        l2c_csm_open (p_ccb, event, p_data);
+        break;
+
+    case CST_W4_L2CAP_DISCONNECT_RSP:
+        l2c_csm_w4_l2cap_disconnect_rsp (p_ccb, event, p_data);
+        break;
+
+    case CST_W4_L2CA_DISCONNECT_RSP:
+        l2c_csm_w4_l2ca_disconnect_rsp (p_ccb, event, p_data);
+        break;
+
+    default:
+        break;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_csm_closed
+**
+** Description      This function handles events when the channel is in
+**                  CLOSED state. This state exists only when the link is
+**                  being initially established.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_closed (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2C_CONN_INFO          *p_ci = (tL2C_CONN_INFO *)p_data;
+    UINT16                  local_cid = p_ccb->local_cid;
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind;
+    tL2CA_CONNECT_CFM_CB    *connect_cfm;
+
+    if (p_ccb->p_rcb == NULL)
+    {
+#if (BT_TRACE_VERBOSE == TRUE)
+        L2CAP_TRACE_ERROR2 ("L2CAP - LCID: 0x%04x  st: CLOSED  evt: %s p_rcb == NULL", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+        L2CAP_TRACE_ERROR2 ("L2CAP - LCID: 0x%04x  st: CLOSED  evt: 0x%04x p_rcb == NULL", p_ccb->local_cid, event);
+#endif
+        return;
+    }
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( local_cid == L2CAP_CONNECTIONLESS_CID )
+    {
+        /* check if this event can be processed by UCD */
+        if ( l2c_ucd_process_event (p_ccb, event, p_data) )
+        {
+            /* The event is processed by UCD state machine */
+            return;
+        }
+    }
+#endif
+
+    disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    connect_cfm    = p_ccb->p_rcb->api.pL2CA_ConnectCfm_Cb;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: CLOSED  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: CLOSED evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_LP_CONNECT_CFM:                         /* Link came up         */
+        p_ccb->chnl_state = CST_ORIG_W4_SEC_COMP;
+        btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, p_ccb->p_rcb->psm,
+                                  p_ccb->p_lcb->handle, TRUE, &l2c_link_sec_comp, p_ccb);
+        break;
+
+    case L2CEVT_LP_CONNECT_CFM_NEG:                     /* Link failed          */
+        /* Disconnect unless ACL collision and upper layer wants to handle it */
+        if (p_ci->status != HCI_ERR_CONNECTION_EXISTS
+            || !btm_acl_notif_conn_collision(p_ccb->p_lcb->remote_bd_addr))
+        {
+            L2CAP_TRACE_API2 ("L2CAP - Calling ConnectCfm_Cb(), CID: 0x%04x  Status: %d", p_ccb->local_cid, p_ci->status);
+            l2cu_release_ccb (p_ccb);
+            (*connect_cfm)(local_cid, p_ci->status);
+        }
+        break;
+
+    case L2CEVT_L2CA_CONNECT_REQ:                       /* API connect request  */
+        /* Cancel sniff mode if needed */
+#if BTM_PWR_MGR_INCLUDED == TRUE
+        {
+            tBTM_PM_PWR_MD settings;
+// btla-specific ++
+            memset((void*)&settings, 0, sizeof(settings));
+// btla-specific --
+            settings.mode = BTM_PM_MD_ACTIVE;
+/* COVERITY
+Event uninit_use_in_call: Using uninitialized value "settings" (field "settings".timeout uninitialized) in call to function "BTM_SetPowerMode" [details]
+Event uninit_use_in_call: Using uninitialized value "settings.max" in call to function "BTM_SetPowerMode" [details]
+Event uninit_use_in_call: Using uninitialized value "settings.min" in call to function "BTM_SetPowerMode"
+// FALSE-POSITIVE error from Coverity test-tool. Please do NOT remove following comment.
+// coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode the other data members of tBTM_PM_PWR_MD are ignored
+*/
+            BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p_ccb->p_lcb->remote_bd_addr, &settings);
+        }
+#else
+        BTM_CancelSniffMode (p_ccb->p_lcb->remote_bd_addr);
+#endif
+
+        /* If sec access does not result in started SEC_COM or COMP_NEG are already processed */
+        if (btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, p_ccb->p_rcb->psm,
+                                      p_ccb->p_lcb->handle, TRUE, &l2c_link_sec_comp, p_ccb) == BTM_CMD_STARTED)
+            p_ccb->chnl_state = CST_ORIG_W4_SEC_COMP;
+        break;
+
+    case L2CEVT_SEC_COMP:
+        p_ccb->chnl_state = CST_W4_L2CAP_CONNECT_RSP;
+
+        /* Wait for the info resp in this state before sending connect req (if needed) */
+        if (!p_ccb->p_lcb->w4_info_rsp)
+        {
+            /* Need to have at least one compatible channel to continue */
+            if (!l2c_fcr_chk_chan_modes(p_ccb))
+            {
+                l2cu_release_ccb (p_ccb);
+                (*p_ccb->p_rcb->api.pL2CA_ConnectCfm_Cb)(local_cid, L2CAP_CONN_NO_LINK);
+            }
+            else
+            {
+                l2cu_send_peer_connect_req (p_ccb);
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT);
+            }
+        }
+        break;
+
+    case L2CEVT_SEC_COMP_NEG:                           /* something is really bad with security */
+        L2CAP_TRACE_API2 ("L2CAP - Calling ConnectCfm_Cb(), CID: 0x%04x  Status: %d", p_ccb->local_cid, L2CAP_CONN_TIMEOUT);
+        l2cu_release_ccb (p_ccb);
+        (*connect_cfm)(local_cid, L2CAP_CONN_SECURITY_BLOCK);
+        break;
+
+    case L2CEVT_L2CAP_CONNECT_REQ:                      /* Peer connect request */
+        /* stop link timer to avoid race condition between A2MP, Security, and L2CAP */
+        btu_stop_timer (&p_ccb->p_lcb->timer_entry);
+
+        /* Cancel sniff mode if needed */
+#if BTM_PWR_MGR_INCLUDED == TRUE
+        {
+            tBTM_PM_PWR_MD settings;
+// btla-specific ++
+            memset((void*)&settings, 0, sizeof(settings));
+// btla-specific --
+            settings.mode = BTM_PM_MD_ACTIVE;
+/* COVERITY
+Event uninit_use_in_call: Using uninitialized value "settings" (field "settings".timeout uninitialized) in call to function "BTM_SetPowerMode" [details]
+Event uninit_use_in_call: Using uninitialized value "settings.max" in call to function "BTM_SetPowerMode" [details]
+Event uninit_use_in_call: Using uninitialized value "settings.min" in call to function "BTM_SetPowerMode"
+// FALSE-POSITIVE error from Coverity test-tool. Please do NOT remove following comment.
+// coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode the other data members of tBTM_PM_PWR_MD are ignored
+*/
+            BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p_ccb->p_lcb->remote_bd_addr, &settings);
+        }
+#else
+        BTM_CancelSniffMode (p_ccb->p_lcb->remote_bd_addr);
+#endif
+
+        p_ccb->chnl_state = CST_TERM_W4_SEC_COMP;
+        if (btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, p_ccb->p_rcb->psm,
+                                  p_ccb->p_lcb->handle, FALSE, &l2c_link_sec_comp, p_ccb) == BTM_CMD_STARTED)
+        {
+            /* started the security process, tell the peer to set a longer timer */
+            l2cu_send_peer_connect_rsp(p_ccb, L2CAP_CONN_PENDING, 0);
+        }
+        break;
+
+    case L2CEVT_TIMEOUT:
+        L2CAP_TRACE_API2 ("L2CAP - Calling ConnectCfm_Cb(), CID: 0x%04x  Status: %d", p_ccb->local_cid, L2CAP_CONN_TIMEOUT);
+        l2cu_release_ccb (p_ccb);
+        (*connect_cfm)(local_cid, L2CAP_CONN_TIMEOUT);
+        break;
+
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+        GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        l2cu_release_ccb (p_ccb);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_orig_w4_sec_comp
+**
+** Description      This function handles events when the channel is in
+**                  CST_ORIG_W4_SEC_COMP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_orig_w4_sec_comp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    tL2CA_CONNECT_CFM_CB    *connect_cfm = p_ccb->p_rcb->api.pL2CA_ConnectCfm_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: ORIG_W4_SEC_COMP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: ORIG_W4_SEC_COMP evt: %d", event);
+#endif
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( local_cid == L2CAP_CONNECTIONLESS_CID )
+    {
+        /* check if this event can be processed by UCD */
+        if ( l2c_ucd_process_event (p_ccb, event, p_data) )
+        {
+            /* The event is processed by UCD state machine */
+            return;
+        }
+    }
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                   /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_SEC_RE_SEND_CMD:                    /* BTM has enough info to proceed */
+    case L2CEVT_LP_CONNECT_CFM:                     /* Link came up         */
+        btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, p_ccb->p_rcb->psm,
+                                  p_ccb->p_lcb->handle, TRUE, &l2c_link_sec_comp, p_ccb);
+        break;
+
+    case L2CEVT_SEC_COMP:                            /* Security completed success */
+        /* Wait for the info resp in this state before sending connect req (if needed) */
+        p_ccb->chnl_state = CST_W4_L2CAP_CONNECT_RSP;
+        if (!p_ccb->p_lcb->w4_info_rsp)
+        {
+            /* Need to have at least one compatible channel to continue */
+            if (!l2c_fcr_chk_chan_modes(p_ccb))
+            {
+                l2cu_release_ccb (p_ccb);
+                (*connect_cfm)(local_cid, L2CAP_CONN_NO_LINK);
+            }
+            else
+            {
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT);
+                l2cu_send_peer_connect_req (p_ccb);          /* Start Connection     */
+            }
+        }
+        break;
+
+    case L2CEVT_SEC_COMP_NEG:
+        L2CAP_TRACE_API2 ("L2CAP - Calling ConnectCfm_Cb(), CID: 0x%04x  Status: %d", p_ccb->local_cid, HCI_ERR_AUTH_FAILURE);
+
+        /* If last channel immediately disconnect the ACL for better security.
+           Also prevents a race condition between BTM and L2CAP */
+        if ( (p_ccb == p_ccb->p_lcb->ccb_queue.p_first_ccb) && (p_ccb == p_ccb->p_lcb->ccb_queue.p_last_ccb) )
+        {
+            p_ccb->p_lcb->idle_timeout = 0;
+        }
+
+        l2cu_release_ccb (p_ccb);
+        (*connect_cfm)(local_cid, HCI_ERR_AUTH_FAILURE);
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+        GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        /* Tell security manager to abort */
+        btm_sec_abort_access_req (p_ccb->p_lcb->remote_bd_addr);
+
+        l2cu_release_ccb (p_ccb);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_term_w4_sec_comp
+**
+** Description      This function handles events when the channel is in
+**                  CST_TERM_W4_SEC_COMP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_term_w4_sec_comp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: TERM_W4_SEC_COMP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: TERM_W4_SEC_COMP evt: %d", event);
+#endif
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID )
+    {
+        /* check if this event can be processed by UCD */
+        if ( l2c_ucd_process_event (p_ccb, event, p_data) )
+        {
+            /* The event is processed by UCD state machine */
+            return;
+        }
+    }
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        /* Tell security manager to abort */
+        btm_sec_abort_access_req (p_ccb->p_lcb->remote_bd_addr);
+
+        l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_SEC_COMP:
+        p_ccb->chnl_state = CST_W4_L2CA_CONNECT_RSP;
+
+        /* Wait for the info resp in next state before sending connect ind (if needed) */
+        if (!p_ccb->p_lcb->w4_info_rsp)
+        {
+            /* Don't need to get info from peer or already retrieved so continue */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT);
+            L2CAP_TRACE_API1 ("L2CAP - Calling Connect_Ind_Cb(), CID: 0x%04x", p_ccb->local_cid);
+
+            (*p_ccb->p_rcb->api.pL2CA_ConnectInd_Cb) (p_ccb->p_lcb->remote_bd_addr, p_ccb->local_cid,
+                                                      p_ccb->p_rcb->psm, p_ccb->remote_id);
+        }
+        else
+        {
+            /*
+            ** L2CAP Connect Response will be sent out by 3 sec timer expiration
+            ** because Bluesoleil doesn't respond to L2CAP Information Request.
+            ** Bluesoleil seems to disconnect ACL link as failure case, because
+            ** it takes too long (4~7secs) to get response.
+            ** product version : Bluesoleil 2.1.1.0 EDR Release 060123
+            ** stack version   : 05.04.11.20060119
+            */
+
+            /* Waiting for the info resp, tell the peer to set a longer timer */
+            l2cu_send_peer_connect_rsp(p_ccb, L2CAP_CONN_PENDING, 0);
+        }
+        break;
+
+    case L2CEVT_SEC_COMP_NEG:
+        if (((tL2C_CONN_INFO *)p_data)->status == BTM_DELAY_CHECK)
+        {
+            /* start a timer - encryption change not received before L2CAP connect req */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_DELAY_CHECK_SM4);
+        }
+        else
+        {
+            l2cu_send_peer_connect_rsp (p_ccb, L2CAP_CONN_SECURITY_BLOCK, 0);
+            l2cu_release_ccb (p_ccb);
+        }
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+        GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_L2CAP_DISCONNECT_REQ:                  /* Peer disconnected request */
+        l2cu_send_peer_disc_rsp (p_ccb->p_lcb, p_ccb->remote_id, p_ccb->local_cid, p_ccb->remote_cid);
+
+        /* Tell security manager to abort */
+        btm_sec_abort_access_req (p_ccb->p_lcb->remote_bd_addr);
+
+        l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        /* SM4 related. */
+        if (!btsnd_hcic_disconnect (p_ccb->p_lcb->handle, HCI_ERR_AUTH_FAILURE))
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling btsnd_hcic_disconnect for handle %i failed", p_ccb->p_lcb->handle);
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, 1);
+        }
+        break;
+
+    case L2CEVT_SEC_RE_SEND_CMD:                    /* BTM has enough info to proceed */
+        btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, p_ccb->p_rcb->psm,
+                                  p_ccb->p_lcb->handle, FALSE, &l2c_link_sec_comp, p_ccb);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_w4_l2cap_connect_rsp
+**
+** Description      This function handles events when the channel is in
+**                  CST_W4_L2CAP_CONNECT_RSP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_w4_l2cap_connect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2C_CONN_INFO          *p_ci = (tL2C_CONN_INFO *)p_data;
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    tL2CA_CONNECT_CFM_CB    *connect_cfm = p_ccb->p_rcb->api.pL2CA_ConnectCfm_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: W4_L2CAP_CON_RSP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: W4_L2CAP_CON_RSP evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        /* Send disc indication unless peer to peer race condition AND normal disconnect */
+        /* *((UINT8 *)p_data) != HCI_ERR_PEER_USER happens when peer device try to disconnect for normal reason */
+        p_ccb->chnl_state = CST_CLOSED;
+        if ((p_ccb->flags & CCB_FLAG_NO_RETRY) || !p_data || (*((UINT8 *)p_data) != HCI_ERR_PEER_USER))
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed",
+                              p_ccb->local_cid);
+            l2cu_release_ccb (p_ccb);
+            (*disconnect_ind)(local_cid, FALSE);
+        }
+        p_ccb->flags |= CCB_FLAG_NO_RETRY;
+        break;
+
+    case L2CEVT_L2CAP_CONNECT_RSP:                  /* Got peer connect confirm */
+        p_ccb->remote_cid = p_ci->remote_cid;
+        p_ccb->chnl_state = CST_CONFIG;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Connect_Cfm_Cb(), CID: 0x%04x, Success", p_ccb->local_cid);
+
+        (*p_ccb->p_rcb->api.pL2CA_ConnectCfm_Cb)(local_cid, L2CAP_CONN_OK);
+        break;
+
+    case L2CEVT_L2CAP_CONNECT_RSP_PND:              /* Got peer connect pending */
+        p_ccb->remote_cid = p_ci->remote_cid;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT_EXT);
+        if (p_ccb->p_rcb->api.pL2CA_ConnectPnd_Cb)
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling Connect_Pnd_Cb(), CID: 0x%04x", p_ccb->local_cid);
+            (*p_ccb->p_rcb->api.pL2CA_ConnectPnd_Cb)(p_ccb->local_cid);
+        }
+        break;
+
+    case L2CEVT_L2CAP_CONNECT_RSP_NEG:              /* Peer rejected connection */
+        L2CAP_TRACE_API2 ("L2CAP - Calling Connect_Cfm_Cb(), CID: 0x%04x, Failure Code: %d", p_ccb->local_cid, p_ci->l2cap_result);
+        l2cu_release_ccb (p_ccb);
+        (*connect_cfm)(local_cid, p_ci->l2cap_result);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        L2CAP_TRACE_API1 ("L2CAP - Calling Connect_Cfm_Cb(), CID: 0x%04x, Timeout", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*connect_cfm)(local_cid, L2CAP_CONN_TIMEOUT);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        /* If we know peer CID from connect pending, we can send disconnect */
+        if (p_ccb->remote_cid != 0)
+        {
+            l2cu_send_peer_disc_req (p_ccb);
+            p_ccb->chnl_state = CST_W4_L2CAP_DISCONNECT_RSP;
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        }
+        else
+            l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+        GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_L2CAP_INFO_RSP:
+        /* Need to have at least one compatible channel to continue */
+        if (!l2c_fcr_chk_chan_modes(p_ccb))
+        {
+            l2cu_release_ccb (p_ccb);
+            (*connect_cfm)(local_cid, L2CAP_CONN_NO_LINK);
+        }
+        else
+        {
+            /* We have feature info, so now send peer connect request */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT);
+            l2cu_send_peer_connect_req (p_ccb);          /* Start Connection     */
+        }
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_w4_l2ca_connect_rsp
+**
+** Description      This function handles events when the channel is in
+**                  CST_W4_L2CA_CONNECT_RSP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_w4_l2ca_connect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2C_CONN_INFO          *p_ci;
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: W4_L2CA_CON_RSP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: W4_L2CA_CON_RSP evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_L2CA_CONNECT_RSP:
+        p_ci = (tL2C_CONN_INFO *)p_data;
+
+        /* Result should be OK or PENDING */
+        if ((!p_ci) || (p_ci->l2cap_result == L2CAP_CONN_OK))
+        {
+            l2cu_send_peer_connect_rsp (p_ccb, L2CAP_CONN_OK, 0);
+            p_ccb->chnl_state = CST_CONFIG;
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+        }
+        else
+        {
+            /* If pending, stay in same state and start extended timer */
+            l2cu_send_peer_connect_rsp (p_ccb, p_ci->l2cap_result, p_ci->l2cap_status);
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT_EXT);
+        }
+        break;
+
+    case L2CEVT_L2CA_CONNECT_RSP_NEG:
+        p_ci = (tL2C_CONN_INFO *)p_data;
+        l2cu_send_peer_connect_rsp (p_ccb, p_ci->l2cap_result, p_ci->l2cap_status);
+        l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        l2cu_send_peer_connect_rsp (p_ccb, L2CAP_CONN_NO_PSM, 0);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+        GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        l2cu_send_peer_disc_req (p_ccb);
+        p_ccb->chnl_state = CST_W4_L2CAP_DISCONNECT_RSP;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        break;
+
+    case L2CEVT_L2CAP_INFO_RSP:
+        /* We have feature info, so now give the upper layer connect IND */
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CONNECT_TOUT);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Connect_Ind_Cb(), CID: 0x%04x", p_ccb->local_cid);
+
+        (*p_ccb->p_rcb->api.pL2CA_ConnectInd_Cb) (p_ccb->p_lcb->remote_bd_addr,
+                                                  p_ccb->local_cid,
+                                                  p_ccb->p_rcb->psm,
+                                                  p_ccb->remote_id);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_config
+**
+** Description      This function handles events when the channel is in
+**                  CONFIG state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_config (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2CAP_CFG_INFO         *p_cfg = (tL2CAP_CFG_INFO *)p_data;
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+    UINT8                   cfg_result;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: CONFIG  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: CONFIG evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_L2CAP_CONFIG_REQ:                  /* Peer config request   */
+
+        if ((cfg_result = l2cu_process_peer_cfg_req (p_ccb, p_cfg)) == L2CAP_PEER_CFG_OK)
+        {
+            L2CAP_TRACE_EVENT2 ("L2CAP - Calling Config_Req_Cb(), CID: 0x%04x, C-bit %d",
+                                p_ccb->local_cid, (p_cfg->flags & L2CAP_CFG_FLAGS_MASK_CONT));
+            (*p_ccb->p_rcb->api.pL2CA_ConfigInd_Cb)(p_ccb->local_cid, p_cfg);
+        }
+        else if (cfg_result == L2CAP_PEER_CFG_DISCONNECT)
+        {
+            /* Disconnect if channels are incompatible */
+            L2CAP_TRACE_EVENT0 ("L2CAP - incompatible configurations disconnect");
+            l2cu_disconnect_chnl (p_ccb);
+        }
+        else /* Return error to peer so he can renegotiate if possible */
+        {
+            L2CAP_TRACE_EVENT0 ("L2CAP - incompatible configurations trying reconfig");
+            l2cu_send_peer_config_rsp (p_ccb, p_cfg);
+        }
+        break;
+
+    case L2CEVT_L2CAP_CONFIG_RSP:                  /* Peer config response  */
+         l2cu_process_peer_cfg_rsp (p_ccb, p_cfg);
+
+         if (p_cfg->result != L2CAP_CFG_PENDING)
+         {
+             /* TBD: When config options grow beyong minimum MTU (48 bytes)
+              *      logic needs to be added to handle responses with
+              *      continuation bit set in flags field.
+              *       1. Send additional config request out until C-bit is cleared in response
+              */
+             p_ccb->config_done |= OB_CFG_DONE;
+
+             if (p_ccb->config_done & IB_CFG_DONE)
+             {
+                /* Verify two sides are in compatible modes before continuing */
+                if (p_ccb->our_cfg.fcr.mode != p_ccb->peer_cfg.fcr.mode)
+                {
+                    l2cu_send_peer_disc_req (p_ccb);
+                    L2CAP_TRACE_WARNING1 ("L2CAP - Calling Disconnect_Ind_Cb(Incompatible CFG), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+                    l2cu_release_ccb (p_ccb);
+                    (*disconnect_ind)(local_cid, FALSE);
+                    break;
+                }
+
+                p_ccb->config_done |= RECONFIG_FLAG;
+                p_ccb->chnl_state = CST_OPEN;
+                l2c_link_adjust_chnl_allocation ();
+                btu_stop_timer (&p_ccb->timer_entry);
+
+                /* If using eRTM and waiting for an ACK, restart the ACK timer */
+                if (p_ccb->fcrb.wait_ack)
+                    l2c_fcr_start_timer(p_ccb);
+
+                /*
+                ** check p_ccb->our_cfg.fcr.mon_tout and p_ccb->our_cfg.fcr.rtrans_tout
+                ** we may set them to zero when sending config request during renegotiation
+                */
+                if ((p_ccb->our_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+                   &&((p_ccb->our_cfg.fcr.mon_tout == 0)||(p_ccb->our_cfg.fcr.rtrans_tout)))
+                {
+                    l2c_fcr_adj_monitor_retran_timeout (p_ccb);
+                }
+
+#if (L2CAP_ERTM_STATS == TRUE)
+                p_ccb->fcrb.connect_tick_count = GKI_get_os_tick_count();
+#endif
+                /* See if we can forward anything on the hold queue */
+                if (p_ccb->xmit_hold_q.count)
+                {
+                    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+                }
+            }
+        }
+
+        L2CAP_TRACE_API1 ("L2CAP - Calling Config_Rsp_Cb(), CID: 0x%04x", p_ccb->local_cid);
+        (*p_ccb->p_rcb->api.pL2CA_ConfigCfm_Cb)(p_ccb->local_cid, p_cfg);
+        break;
+
+    case L2CEVT_L2CAP_CONFIG_RSP_NEG:              /* Peer config error rsp */
+        /* Disable the Timer */
+         btu_stop_timer (&p_ccb->timer_entry);
+
+        /* If failure was channel mode try to renegotiate */
+        if (l2c_fcr_renegotiate_chan(p_ccb, p_cfg) == FALSE)
+        {
+            L2CAP_TRACE_API2 ("L2CAP - Calling Config_Rsp_Cb(), CID: 0x%04x, Failure: %d", p_ccb->local_cid, p_cfg->result);
+            (*p_ccb->p_rcb->api.pL2CA_ConfigCfm_Cb)(p_ccb->local_cid, p_cfg);
+        }
+        break;
+
+    case L2CEVT_L2CAP_DISCONNECT_REQ:                  /* Peer disconnected request */
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        p_ccb->chnl_state = CST_W4_L2CA_DISCONNECT_RSP;
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  Conf Needed", p_ccb->local_cid);
+        (*p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb)(p_ccb->local_cid, TRUE);
+        break;
+
+    case L2CEVT_L2CA_CONFIG_REQ:                   /* Upper layer config req   */
+        l2cu_process_our_cfg_req (p_ccb, p_cfg);
+        l2cu_send_peer_config_req (p_ccb, p_cfg);
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+        break;
+
+    case L2CEVT_L2CA_CONFIG_RSP:                   /* Upper layer config rsp   */
+        l2cu_process_our_cfg_rsp (p_ccb, p_cfg);
+
+        /* Not finished if continuation flag is set */
+        if ( (p_cfg->flags & L2CAP_CFG_FLAGS_MASK_CONT) || (p_cfg->result == L2CAP_CFG_PENDING) )
+        {
+            /* Send intermediate response; remain in cfg state */
+            l2cu_send_peer_config_rsp (p_ccb, p_cfg);
+            break;
+        }
+
+        /* Local config done; clear cached configuration in case reconfig takes place later */
+        p_ccb->peer_cfg.mtu_present = FALSE;
+        p_ccb->peer_cfg.flush_to_present = FALSE;
+        p_ccb->peer_cfg.qos_present = FALSE;
+
+        p_ccb->config_done |= IB_CFG_DONE;
+
+        if (p_ccb->config_done & OB_CFG_DONE)
+        {
+            /* Verify two sides are in compatible modes before continuing */
+            if (p_ccb->our_cfg.fcr.mode != p_ccb->peer_cfg.fcr.mode)
+            {
+                l2cu_send_peer_disc_req (p_ccb);
+                L2CAP_TRACE_WARNING1 ("L2CAP - Calling Disconnect_Ind_Cb(Incompatible CFG), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+                l2cu_release_ccb (p_ccb);
+                (*disconnect_ind)(local_cid, FALSE);
+                break;
+            }
+
+            p_ccb->config_done |= RECONFIG_FLAG;
+            p_ccb->chnl_state = CST_OPEN;
+            l2c_link_adjust_chnl_allocation ();
+            btu_stop_timer (&p_ccb->timer_entry);
+        }
+
+        l2cu_send_peer_config_rsp (p_ccb, p_cfg);
+
+        /* If using eRTM and waiting for an ACK, restart the ACK timer */
+        if (p_ccb->fcrb.wait_ack)
+            l2c_fcr_start_timer(p_ccb);
+
+#if (L2CAP_ERTM_STATS == TRUE)
+        p_ccb->fcrb.connect_tick_count = GKI_get_os_tick_count();
+#endif
+
+        /* See if we can forward anything on the hold queue */
+        if ( (p_ccb->chnl_state == CST_OPEN) && (p_ccb->xmit_hold_q.count) )
+        {
+            l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+        }
+        break;
+
+    case L2CEVT_L2CA_CONFIG_RSP_NEG:               /* Upper layer config reject */
+        l2cu_send_peer_config_rsp (p_ccb, p_cfg);
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        l2cu_send_peer_disc_req (p_ccb);
+        p_ccb->chnl_state = CST_W4_L2CAP_DISCONNECT_RSP;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        break;
+
+    case L2CEVT_L2CAP_DATA:                        /* Peer data packet rcvd    */
+        L2CAP_TRACE_API1 ("L2CAP - Calling DataInd_Cb(), CID: 0x%04x", p_ccb->local_cid);
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+        if (p_ccb->local_cid < L2CAP_BASE_APPL_CID)
+        {
+            if (l2cb.fixed_reg[p_ccb->local_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)
+                (*l2cb.fixed_reg[p_ccb->local_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)(p_ccb->p_lcb->remote_bd_addr,(BT_HDR *)p_data);
+            else
+                GKI_freebuf (p_data);
+
+            break;
+        }
+#endif
+        (*p_ccb->p_rcb->api.pL2CA_DataInd_Cb)(p_ccb->local_cid, (BT_HDR *)p_data);
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                   /* Upper layer data to send */
+        if (p_ccb->config_done & OB_CFG_DONE)
+            l2c_enqueue_peer_data (p_ccb, (BT_HDR *)p_data);
+        else
+            GKI_freebuf (p_data);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        l2cu_send_peer_disc_req (p_ccb);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_open
+**
+** Description      This function handles events when the channel is in
+**                  OPEN state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_open (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    UINT16                  local_cid = p_ccb->local_cid;
+    tL2CAP_CFG_INFO         *p_cfg;
+    tL2C_CHNL_STATE         tempstate;
+    UINT8                   tempcfgdone;
+    UINT8                   cfg_result;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: OPEN  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: OPEN evt: %d", event);
+#endif
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( local_cid == L2CAP_CONNECTIONLESS_CID )
+    {
+        /* check if this event can be processed by UCD */
+        if ( l2c_ucd_process_event (p_ccb, event, p_data) )
+        {
+            /* The event is processed by UCD state machine */
+            return;
+        }
+    }
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        if (p_ccb->p_rcb)
+            (*p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_LP_QOS_VIOLATION_IND:               /* QOS violation         */
+        /* Tell upper layer. If service guaranteed, then clear the channel   */
+        if (p_ccb->p_rcb->api.pL2CA_QoSViolationInd_Cb)
+            (*p_ccb->p_rcb->api.pL2CA_QoSViolationInd_Cb)(p_ccb->p_lcb->remote_bd_addr);
+        break;
+
+    case L2CEVT_L2CAP_CONFIG_REQ:                  /* Peer config request   */
+        p_cfg = (tL2CAP_CFG_INFO *)p_data;
+
+        tempstate = p_ccb->chnl_state;
+        tempcfgdone = p_ccb->config_done;
+        p_ccb->chnl_state = CST_CONFIG;
+        p_ccb->config_done &= ~CFG_DONE_MASK;
+
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+
+        if ((cfg_result = l2cu_process_peer_cfg_req (p_ccb, p_cfg)) == L2CAP_PEER_CFG_OK)
+        {
+            (*p_ccb->p_rcb->api.pL2CA_ConfigInd_Cb)(p_ccb->local_cid, p_cfg);
+        }
+
+        /* Error in config parameters: reset state and config flag */
+        else if (cfg_result == L2CAP_PEER_CFG_UNACCEPTABLE)
+        {
+            btu_stop_timer(&p_ccb->timer_entry);
+            p_ccb->chnl_state = tempstate;
+            p_ccb->config_done = tempcfgdone;
+            l2cu_send_peer_config_rsp (p_ccb, p_cfg);
+        }
+        else    /* L2CAP_PEER_CFG_DISCONNECT */
+        {
+            /* Disconnect if channels are incompatible
+             * Note this should not occur if reconfigure
+             * since this should have never passed original config.
+             */
+            l2cu_disconnect_chnl (p_ccb);
+        }
+        break;
+
+    case L2CEVT_L2CAP_DISCONNECT_REQ:                  /* Peer disconnected request */
+// btla-specific ++
+        /* Make sure we are not in sniff mode */
+#if BTM_PWR_MGR_INCLUDED == TRUE
+        {
+            tBTM_PM_PWR_MD settings;
+            settings.mode = BTM_PM_MD_ACTIVE;
+            BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p_ccb->p_lcb->remote_bd_addr, &settings);
+        }
+#else
+        BTM_CancelSniffMode (p_ccb->p_lcb->remote_bd_addr);
+#endif
+// btla-specific --
+
+        p_ccb->chnl_state = CST_W4_L2CA_DISCONNECT_RSP;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  Conf Needed", p_ccb->local_cid);
+        (*p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb)(p_ccb->local_cid, TRUE);
+        break;
+
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+        (*p_ccb->p_rcb->api.pL2CA_DataInd_Cb)(p_ccb->local_cid, (BT_HDR *)p_data);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                 /* Upper wants to disconnect */
+        /* Make sure we are not in sniff mode */
+#if BTM_PWR_MGR_INCLUDED == TRUE
+        {
+            tBTM_PM_PWR_MD settings;
+            settings.mode = BTM_PM_MD_ACTIVE;
+            BTM_SetPowerMode (BTM_PM_SET_ONLY_ID, p_ccb->p_lcb->remote_bd_addr, &settings);
+        }
+#else
+        BTM_CancelSniffMode (p_ccb->p_lcb->remote_bd_addr);
+#endif
+
+        l2cu_send_peer_disc_req (p_ccb);
+        p_ccb->chnl_state = CST_W4_L2CAP_DISCONNECT_RSP;
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_DISCONNECT_TOUT);
+        break;
+
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+        l2c_enqueue_peer_data (p_ccb, (BT_HDR *)p_data);
+        l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+        break;
+
+    case L2CEVT_L2CA_CONFIG_REQ:                   /* Upper layer config req   */
+        p_ccb->chnl_state = CST_CONFIG;
+        p_ccb->config_done &= ~CFG_DONE_MASK;
+        l2cu_process_our_cfg_req (p_ccb, (tL2CAP_CFG_INFO *)p_data);
+        l2cu_send_peer_config_req (p_ccb, (tL2CAP_CFG_INFO *)p_data);
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        /* Process the monitor/retransmission time-outs in flow control/retrans mode */
+        if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+            l2c_fcr_proc_tout (p_ccb);
+        break;
+
+    case L2CEVT_ACK_TIMEOUT:
+        l2c_fcr_proc_ack_tout (p_ccb);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_w4_l2cap_disconnect_rsp
+**
+** Description      This function handles events when the channel is in
+**                  CST_W4_L2CAP_DISCONNECT_RSP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_w4_l2cap_disconnect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2CA_DISCONNECT_CFM_CB *disconnect_cfm = p_ccb->p_rcb->api.pL2CA_DisconnectCfm_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: W4_L2CAP_DISC_RSP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: W4_L2CAP_DISC_RSP evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_L2CAP_DISCONNECT_RSP:                /* Peer disconnect response */
+        l2cu_release_ccb (p_ccb);
+        if (disconnect_cfm)
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling DisconnectCfm_Cb(), CID: 0x%04x", local_cid);
+            (*disconnect_cfm)(local_cid, L2CAP_DISC_OK);
+        }
+        break;
+
+    case L2CEVT_L2CAP_DISCONNECT_REQ:                /* Peer disconnect request  */
+        l2cu_send_peer_disc_rsp (p_ccb->p_lcb, p_ccb->remote_id, p_ccb->local_cid, p_ccb->remote_cid);
+        l2cu_release_ccb (p_ccb);
+        if (disconnect_cfm)
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling DisconnectCfm_Cb(), CID: 0x%04x", local_cid);
+            (*disconnect_cfm)(local_cid, L2CAP_DISC_OK);
+        }
+       break;
+
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+    case L2CEVT_TIMEOUT:                            /* Timeout */
+        l2cu_release_ccb (p_ccb);
+        if (disconnect_cfm)
+        {
+            L2CAP_TRACE_API1 ("L2CAP - Calling DisconnectCfm_Cb(), CID: 0x%04x", local_cid);
+            (*disconnect_cfm)(local_cid, L2CAP_DISC_TIMEOUT);
+        }
+        break;
+
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+        GKI_freebuf (p_data);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_csm_w4_l2ca_disconnect_rsp
+**
+** Description      This function handles events when the channel is in
+**                  CST_W4_L2CA_DISCONNECT_RSP state.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_csm_w4_l2ca_disconnect_rsp (tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    tL2CA_DISCONNECT_IND_CB *disconnect_ind = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+    UINT16                  local_cid = p_ccb->local_cid;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    L2CAP_TRACE_EVENT2 ("L2CAP - LCID: 0x%04x  st: W4_L2CA_DISC_RSP  evt: %s", p_ccb->local_cid, l2c_csm_get_event_name (event));
+#else
+    L2CAP_TRACE_EVENT1 ("L2CAP - st: W4_L2CA_DISC_RSP evt: %d", event);
+#endif
+
+    switch (event)
+    {
+    case L2CEVT_LP_DISCONNECT_IND:                  /* Link was disconnected */
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_TIMEOUT:
+        l2cu_send_peer_disc_rsp (p_ccb->p_lcb, p_ccb->remote_id, p_ccb->local_cid, p_ccb->remote_cid);
+        L2CAP_TRACE_API1 ("L2CAP - Calling Disconnect_Ind_Cb(), CID: 0x%04x  No Conf Needed", p_ccb->local_cid);
+        l2cu_release_ccb (p_ccb);
+        (*disconnect_ind)(local_cid, FALSE);
+        break;
+
+    case L2CEVT_L2CA_DISCONNECT_REQ:                /* Upper disconnect request */
+    case L2CEVT_L2CA_DISCONNECT_RSP:                /* Upper disconnect response */
+        l2cu_send_peer_disc_rsp (p_ccb->p_lcb, p_ccb->remote_id, p_ccb->local_cid, p_ccb->remote_cid);
+        l2cu_release_ccb (p_ccb);
+        break;
+
+    case L2CEVT_L2CAP_DATA:                         /* Peer data packet rcvd    */
+    case L2CEVT_L2CA_DATA_WRITE:                    /* Upper layer data to send */
+        GKI_freebuf (p_data);
+        break;
+    }
+}
+
+
+#if (BT_TRACE_VERBOSE == TRUE)
+/*******************************************************************************
+**
+** Function         l2c_csm_get_event_name
+**
+** Description      This function returns the event name.
+**
+** NOTE             conditionally compiled to save memory.
+**
+** Returns          pointer to the name
+**
+*******************************************************************************/
+static char *l2c_csm_get_event_name (UINT16 event)
+{
+    switch (event)
+    {
+    case L2CEVT_LP_CONNECT_CFM:                  /* Lower layer connect confirm          */
+        return ("LOWER_LAYER_CONNECT_CFM");
+    case L2CEVT_LP_CONNECT_CFM_NEG:              /* Lower layer connect confirm (failed) */
+        return ("LOWER_LAYER_CONNECT_CFM_NEG");
+    case L2CEVT_LP_CONNECT_IND:                  /* Lower layer connect indication       */
+        return ("LOWER_LAYER_CONNECT_IND");
+    case L2CEVT_LP_DISCONNECT_IND:               /* Lower layer disconnect indication    */
+        return ("LOWER_LAYER_DISCONNECT_IND");
+    case L2CEVT_LP_QOS_CFM:                      /* Lower layer QOS confirmation         */
+        return ("LOWER_LAYER_QOS_CFM");
+    case L2CEVT_LP_QOS_CFM_NEG:                  /* Lower layer QOS confirmation (failed)*/
+        return ("LOWER_LAYER_QOS_CFM_NEG");
+    case L2CEVT_LP_QOS_VIOLATION_IND:            /* Lower layer QOS violation indication */
+        return ("LOWER_LAYER_QOS_VIOLATION_IND");
+
+    case L2CEVT_SEC_COMP:                        /* Security cleared successfully        */
+        return ("SECURITY_COMPLETE");
+    case L2CEVT_SEC_COMP_NEG:                    /* Security procedure failed            */
+        return ("SECURITY_COMPLETE_NEG");
+
+    case L2CEVT_L2CAP_CONNECT_REQ:               /* Peer connection request              */
+        return ("PEER_CONNECT_REQ");
+    case L2CEVT_L2CAP_CONNECT_RSP:               /* Peer connection response             */
+        return ("PEER_CONNECT_RSP");
+    case L2CEVT_L2CAP_CONNECT_RSP_PND:           /* Peer connection response pending     */
+        return ("PEER_CONNECT_RSP_PND");
+    case L2CEVT_L2CAP_CONNECT_RSP_NEG:           /* Peer connection response (failed)    */
+        return ("PEER_CONNECT_RSP_NEG");
+    case L2CEVT_L2CAP_CONFIG_REQ:                /* Peer configuration request           */
+        return ("PEER_CONFIG_REQ");
+    case L2CEVT_L2CAP_CONFIG_RSP:                /* Peer configuration response          */
+        return ("PEER_CONFIG_RSP");
+    case L2CEVT_L2CAP_CONFIG_RSP_NEG:            /* Peer configuration response (failed) */
+        return ("PEER_CONFIG_RSP_NEG");
+    case L2CEVT_L2CAP_DISCONNECT_REQ:            /* Peer disconnect request              */
+        return ("PEER_DISCONNECT_REQ");
+    case L2CEVT_L2CAP_DISCONNECT_RSP:            /* Peer disconnect response             */
+        return ("PEER_DISCONNECT_RSP");
+    case L2CEVT_L2CAP_DATA:                      /* Peer data                            */
+        return ("PEER_DATA");
+
+    case L2CEVT_L2CA_CONNECT_REQ:                /* Upper layer connect request          */
+        return ("UPPER_LAYER_CONNECT_REQ");
+    case L2CEVT_L2CA_CONNECT_RSP:                /* Upper layer connect response         */
+        return ("UPPER_LAYER_CONNECT_RSP");
+    case L2CEVT_L2CA_CONNECT_RSP_NEG:            /* Upper layer connect response (failed)*/
+        return ("UPPER_LAYER_CONNECT_RSP_NEG");
+    case L2CEVT_L2CA_CONFIG_REQ:                 /* Upper layer config request           */
+        return ("UPPER_LAYER_CONFIG_REQ");
+    case L2CEVT_L2CA_CONFIG_RSP:                 /* Upper layer config response          */
+        return ("UPPER_LAYER_CONFIG_RSP");
+    case L2CEVT_L2CA_CONFIG_RSP_NEG:             /* Upper layer config response (failed) */
+        return ("UPPER_LAYER_CONFIG_RSP_NEG");
+    case L2CEVT_L2CA_DISCONNECT_REQ:             /* Upper layer disconnect request       */
+        return ("UPPER_LAYER_DISCONNECT_REQ");
+    case L2CEVT_L2CA_DISCONNECT_RSP:             /* Upper layer disconnect response      */
+        return ("UPPER_LAYER_DISCONNECT_RSP");
+    case L2CEVT_L2CA_DATA_READ:                  /* Upper layer data read                */
+        return ("UPPER_LAYER_DATA_READ");
+    case L2CEVT_L2CA_DATA_WRITE:                 /* Upper layer data write               */
+        return ("UPPER_LAYER_DATA_WRITE");
+    case L2CEVT_TIMEOUT:                         /* Timeout                              */
+        return ("TIMEOUT");
+    case L2CEVT_SEC_RE_SEND_CMD:
+        return ("SEC_RE_SEND_CMD");
+    case L2CEVT_L2CAP_INFO_RSP:                  /* Peer information response            */
+        return ("L2CEVT_L2CAP_INFO_RSP");
+    case L2CEVT_ACK_TIMEOUT:
+        return ("L2CEVT_ACK_TIMEOUT");
+
+    default:
+        return ("???? UNKNOWN EVENT");
+    }
+}
+#endif /* (BT_TRACE_VERBOSE == TRUE) */
+
+
+/*******************************************************************************
+**
+** Function         l2c_enqueue_peer_data
+**
+** Description      Enqueues data destined for the peer in the ccb. Handles
+**                  FCR segmentation and checks for congestion.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_enqueue_peer_data (tL2C_CCB *p_ccb, BT_HDR *p_buf)
+{
+    UINT8       *p;
+
+    if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+    {
+        p_buf->event = 0;
+    }
+    else
+    {
+        /* Save the channel ID for faster counting */
+        p_buf->event = p_ccb->local_cid;
+
+        /* Step back to add the L2CAP header */
+        p_buf->offset -= L2CAP_PKT_OVERHEAD;
+        p_buf->len    += L2CAP_PKT_OVERHEAD;
+
+        /* Set the pointer to the beginning of the data */
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+        /* Now the L2CAP header */
+        UINT16_TO_STREAM (p, p_buf->len - L2CAP_PKT_OVERHEAD);
+        UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    }
+
+    GKI_enqueue (&p_ccb->xmit_hold_q, p_buf);
+
+    l2cu_check_channel_congestion (p_ccb);
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+    /* if new packet is higher priority than serving ccb and it is not overrun */
+    if (( p_ccb->p_lcb->rr_pri > p_ccb->ccb_priority )
+      &&( p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].quota > 0))
+    {
+        /* send out higher priority packet */
+        p_ccb->p_lcb->rr_pri = p_ccb->ccb_priority;
+    }
+#endif
+
+    /* if we are doing a round robin scheduling, set the flag */
+    if (p_ccb->p_lcb->link_xmit_quota == 0)
+        l2cb.check_round_robin = TRUE;
+}
+
+
diff --git a/stack/l2cap/l2c_fcr.c b/stack/l2cap/l2c_fcr.c
new file mode 100644
index 0000000..ff018c5
--- /dev/null
+++ b/stack/l2cap/l2c_fcr.c
@@ -0,0 +1,2709 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2004-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the L2CAP 1.2 Flow Control and retransmissions
+ *  functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "l2c_api.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+
+/* Flag passed to retransmit_i_frames() when all packets should be retransmitted */
+#define L2C_FCR_RETX_ALL_PKTS   0xFF
+
+#if BT_TRACE_VERBOSE == TRUE
+static char *SAR_types[] = { "Unsegmented", "Start", "End", "Continuation" };
+static char *SUP_types[] = { "RR", "REJ", "RNR", "SREJ" };
+#endif
+
+/* Look-up table for the CRC calculation */
+static const unsigned short crctab[256] = {
+    0x0000, 0xc0c1, 0xc181, 0x0140, 0xc301, 0x03c0, 0x0280, 0xc241,
+    0xc601, 0x06c0, 0x0780, 0xc741, 0x0500, 0xc5c1, 0xc481, 0x0440,
+    0xcc01, 0x0cc0, 0x0d80, 0xcd41, 0x0f00, 0xcfc1, 0xce81, 0x0e40,
+    0x0a00, 0xcac1, 0xcb81, 0x0b40, 0xc901, 0x09c0, 0x0880, 0xc841,
+    0xd801, 0x18c0, 0x1980, 0xd941, 0x1b00, 0xdbc1, 0xda81, 0x1a40,
+    0x1e00, 0xdec1, 0xdf81, 0x1f40, 0xdd01, 0x1dc0, 0x1c80, 0xdc41,
+    0x1400, 0xd4c1, 0xd581, 0x1540, 0xd701, 0x17c0, 0x1680, 0xd641,
+    0xd201, 0x12c0, 0x1380, 0xd341, 0x1100, 0xd1c1, 0xd081, 0x1040,
+    0xf001, 0x30c0, 0x3180, 0xf141, 0x3300, 0xf3c1, 0xf281, 0x3240,
+    0x3600, 0xf6c1, 0xf781, 0x3740, 0xf501, 0x35c0, 0x3480, 0xf441,
+    0x3c00, 0xfcc1, 0xfd81, 0x3d40, 0xff01, 0x3fc0, 0x3e80, 0xfe41,
+    0xfa01, 0x3ac0, 0x3b80, 0xfb41, 0x3900, 0xf9c1, 0xf881, 0x3840,
+    0x2800, 0xe8c1, 0xe981, 0x2940, 0xeb01, 0x2bc0, 0x2a80, 0xea41,
+    0xee01, 0x2ec0, 0x2f80, 0xef41, 0x2d00, 0xedc1, 0xec81, 0x2c40,
+    0xe401, 0x24c0, 0x2580, 0xe541, 0x2700, 0xe7c1, 0xe681, 0x2640,
+    0x2200, 0xe2c1, 0xe381, 0x2340, 0xe101, 0x21c0, 0x2080, 0xe041,
+    0xa001, 0x60c0, 0x6180, 0xa141, 0x6300, 0xa3c1, 0xa281, 0x6240,
+    0x6600, 0xa6c1, 0xa781, 0x6740, 0xa501, 0x65c0, 0x6480, 0xa441,
+    0x6c00, 0xacc1, 0xad81, 0x6d40, 0xaf01, 0x6fc0, 0x6e80, 0xae41,
+    0xaa01, 0x6ac0, 0x6b80, 0xab41, 0x6900, 0xa9c1, 0xa881, 0x6840,
+    0x7800, 0xb8c1, 0xb981, 0x7940, 0xbb01, 0x7bc0, 0x7a80, 0xba41,
+    0xbe01, 0x7ec0, 0x7f80, 0xbf41, 0x7d00, 0xbdc1, 0xbc81, 0x7c40,
+    0xb401, 0x74c0, 0x7580, 0xb541, 0x7700, 0xb7c1, 0xb681, 0x7640,
+    0x7200, 0xb2c1, 0xb381, 0x7340, 0xb101, 0x71c0, 0x7080, 0xb041,
+    0x5000, 0x90c1, 0x9181, 0x5140, 0x9301, 0x53c0, 0x5280, 0x9241,
+    0x9601, 0x56c0, 0x5780, 0x9741, 0x5500, 0x95c1, 0x9481, 0x5440,
+    0x9c01, 0x5cc0, 0x5d80, 0x9d41, 0x5f00, 0x9fc1, 0x9e81, 0x5e40,
+    0x5a00, 0x9ac1, 0x9b81, 0x5b40, 0x9901, 0x59c0, 0x5880, 0x9841,
+    0x8801, 0x48c0, 0x4980, 0x8941, 0x4b00, 0x8bc1, 0x8a81, 0x4a40,
+    0x4e00, 0x8ec1, 0x8f81, 0x4f40, 0x8d01, 0x4dc0, 0x4c80, 0x8c41,
+    0x4400, 0x84c1, 0x8581, 0x4540, 0x8701, 0x47c0, 0x4680, 0x8641,
+    0x8201, 0x42c0, 0x4380, 0x8341, 0x4100, 0x81c1, 0x8081, 0x4040,
+};
+
+
+/*******************************************************************************
+**  Static local functions
+*/
+static BOOLEAN process_reqseq (tL2C_CCB *p_ccb, UINT16 ctrl_word);
+static void    process_s_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word);
+static void    process_i_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word, BOOLEAN delay_ack);
+static BOOLEAN retransmit_i_frames (tL2C_CCB *p_ccb, UINT8 tx_seq);
+static void    prepare_I_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, BOOLEAN is_retransmission);
+static void    process_stream_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf);
+static BOOLEAN do_sar_reassembly (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word);
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+static BOOLEAN l2c_corrupt_the_fcr_packet (tL2C_CCB *p_ccb, BT_HDR *p_buf,
+                                           BOOLEAN is_rx, UINT16 ctrl_word);
+static BOOLEAN l2c_bypass_sframe_packet (tL2C_CCB *p_ccb);
+#endif
+
+#if (L2CAP_ERTM_STATS == TRUE)
+static void l2c_fcr_collect_ack_delay (tL2C_CCB *p_ccb, UINT8 num_bufs_acked);
+#endif
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_updcrc
+**
+** Description      This function computes the CRC using the look-up table.
+**
+** Returns          CRC
+**
+*******************************************************************************/
+unsigned short l2c_fcr_updcrc(unsigned short icrc, unsigned char *icp, int icnt)
+{
+    register unsigned short crc = icrc;
+    register unsigned char  *cp = icp;
+    register          int   cnt = icnt;
+
+    while (cnt--)
+    {
+        crc = ((crc >> 8) & 0xff) ^ crctab[(crc & 0xff) ^ *cp++];
+    }
+
+    return(crc);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_tx_get_fcs
+**
+** Description      This function computes the CRC for a frame to be TXed.
+**
+** Returns          CRC
+**
+*******************************************************************************/
+UINT16 l2c_fcr_tx_get_fcs (BT_HDR *p_buf)
+{
+    UINT8   *p = ((UINT8 *) (p_buf + 1)) + p_buf->offset;
+
+    return (l2c_fcr_updcrc (L2CAP_FCR_INIT_CRC, p, p_buf->len));
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_rx_get_fcs
+**
+** Description      This function computes the CRC for a received frame.
+**
+** Returns          CRC
+**
+*******************************************************************************/
+UINT16 l2c_fcr_rx_get_fcs (BT_HDR *p_buf)
+{
+    UINT8   *p = ((UINT8 *) (p_buf + 1)) + p_buf->offset;
+
+    /* offset points past the L2CAP header, but the CRC check includes it */
+    p -= L2CAP_PKT_OVERHEAD;
+
+    return (l2c_fcr_updcrc (L2CAP_FCR_INIT_CRC, p, p_buf->len + L2CAP_PKT_OVERHEAD));
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_start_timer
+**
+** Description      This function starts the (monitor or retransmission) timer.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_start_timer (tL2C_CCB *p_ccb)
+{
+    UINT32  tout;
+
+    /* The timers which are in milliseconds */
+    if (p_ccb->fcrb.wait_ack)
+    {
+        tout = (UINT32)p_ccb->our_cfg.fcr.mon_tout;
+    }
+    else
+    {
+        tout = (UINT32)p_ccb->our_cfg.fcr.rtrans_tout;
+    }
+/*
+    L2CAP_TRACE_DEBUG4 ("l2c_fcr_start_timer Tout: %u  Already Running: %u  wait_ack: %u  ack_q_count: %u",
+                        tout, p_ccb->timer_entry.in_use, p_ccb->fcrb.wait_ack, p_ccb->fcrb.waiting_for_ack_q.count);
+*/
+    /* Only start a timer that was not started */
+    if (p_ccb->fcrb.mon_retrans_timer.in_use == 0)
+        btu_start_quick_timer (&p_ccb->fcrb.mon_retrans_timer, BTU_TTYPE_L2CAP_CHNL, tout*QUICK_TIMER_TICKS_PER_SEC/1000);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_stop_timer
+**
+** Description      This function stops the (monitor or transmission) timer.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_stop_timer (tL2C_CCB *p_ccb)
+{
+    if (p_ccb->fcrb.mon_retrans_timer.in_use)
+    {
+/*
+        L2CAP_TRACE_DEBUG2 ("l2c_fcr_stop_timer wait_ack: %u  ack_q_count: %u",
+                            p_ccb->fcrb.wait_ack, p_ccb->fcrb.waiting_for_ack_q.count);
+*/
+        btu_stop_quick_timer (&p_ccb->fcrb.mon_retrans_timer);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_cleanup
+**
+** Description      This function cleans up the variable used for flow-control/retrans.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_cleanup (tL2C_CCB *p_ccb)
+{
+    tL2C_FCRB *p_fcrb = &p_ccb->fcrb;
+
+    l2c_fcr_stop_timer (p_ccb);
+
+    if (p_fcrb->p_rx_sdu)
+        GKI_freebuf (p_fcrb->p_rx_sdu);
+
+    while (p_fcrb->waiting_for_ack_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_fcrb->waiting_for_ack_q));
+
+    while (p_fcrb->srej_rcv_hold_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_fcrb->srej_rcv_hold_q));
+
+    while (p_fcrb->retrans_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_fcrb->retrans_q));
+
+    btu_stop_quick_timer (&p_fcrb->ack_timer);
+    btu_stop_quick_timer (&p_ccb->fcrb.mon_retrans_timer);
+
+#if (L2CAP_ERTM_STATS == TRUE)
+    if ( (p_ccb->local_cid >= L2CAP_BASE_APPL_CID) && (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) )
+    {
+        UINT32  dur = GKI_get_os_tick_count() - p_ccb->fcrb.connect_tick_count;
+        char    *p_str = (char *)GKI_getbuf(120);
+        UINT16  i;
+        UINT32  throughput_avg, ack_delay_avg, ack_q_count_avg;
+
+        dur = GKI_OS_TICKS_TO_MS(dur);
+        BT_TRACE_2(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "---  L2CAP ERTM  Stats for CID: 0x%04x   Duration: %08ums", p_ccb->local_cid, dur);
+        BT_TRACE_4(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "Retransmissions:%08u Times Flow Controlled:%08u Retrans Touts:%08u Ack Touts:%08u",
+                    p_ccb->fcrb.pkts_retransmitted, p_ccb->fcrb.xmit_window_closed, p_ccb->fcrb.retrans_touts, p_ccb->fcrb.xmit_ack_touts);
+        BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "Times there is less than 2 packets in controller when flow controlled:%08u", p_ccb->fcrb.controller_idle);
+        BT_TRACE_2(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "max_held_acks:%08u, in_cfg.fcr.tx_win_sz:%08u", p_ccb->fcrb.max_held_acks, p_ccb->peer_cfg.fcr.tx_win_sz );
+        if (p_str)
+        {
+            sprintf(p_str, "Sent Pkts:%08u Bytes:%10u(%06u/sec) RR:%08u REJ:%08u RNR:%08u SREJ:%08u",
+                p_ccb->fcrb.ertm_pkt_counts[0], p_ccb->fcrb.ertm_byte_counts[0],
+                (dur >= 10 ? (p_ccb->fcrb.ertm_byte_counts[0] * 100) / (dur / 10) : 0),
+                p_ccb->fcrb.s_frames_sent[0], p_ccb->fcrb.s_frames_sent[1], p_ccb->fcrb.s_frames_sent[2], p_ccb->fcrb.s_frames_sent[3]);
+
+            BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC, "%s", p_str);
+
+            sprintf(p_str, "Rcvd Pkts:%08u Bytes:%10u(%06u/sec) RR:%08u REJ:%08u RNR:%08u SREJ:%08u",
+                p_ccb->fcrb.ertm_pkt_counts[1], p_ccb->fcrb.ertm_byte_counts[1],
+                (dur >= 10 ? (p_ccb->fcrb.ertm_byte_counts[1] * 100) / (dur / 10) : 0),
+                p_ccb->fcrb.s_frames_rcvd[0], p_ccb->fcrb.s_frames_rcvd[1], p_ccb->fcrb.s_frames_rcvd[2], p_ccb->fcrb.s_frames_rcvd[3]);
+
+            BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC, "%s", p_str);
+
+            throughput_avg  = 0;
+            ack_delay_avg   = 0;
+            ack_q_count_avg = 0;
+
+            for (i = 0; i < L2CAP_ERTM_STATS_NUM_AVG; i++ )
+            {
+                if (i == p_ccb->fcrb.ack_delay_avg_index )
+                {
+                    BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                           "[%02u] collecting data ...", i );
+                    continue;
+                }
+
+                sprintf(p_str, "[%02u] throughput: %5u, ack_delay avg:%3u, min:%3u, max:%3u, ack_q_count avg:%3u, min:%3u, max:%3u",
+                        i, p_ccb->fcrb.throughput[i],
+                        p_ccb->fcrb.ack_delay_avg[i], p_ccb->fcrb.ack_delay_min[i], p_ccb->fcrb.ack_delay_max[i],
+                        p_ccb->fcrb.ack_q_count_avg[i], p_ccb->fcrb.ack_q_count_min[i], p_ccb->fcrb.ack_q_count_max[i] );
+
+                BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC, "%s", p_str);
+
+                throughput_avg  += p_ccb->fcrb.throughput[i];
+                ack_delay_avg   += p_ccb->fcrb.ack_delay_avg[i];
+                ack_q_count_avg += p_ccb->fcrb.ack_q_count_avg[i];
+            }
+
+            throughput_avg  /= (L2CAP_ERTM_STATS_NUM_AVG - 1);
+            ack_delay_avg   /= (L2CAP_ERTM_STATS_NUM_AVG - 1);
+            ack_q_count_avg /= (L2CAP_ERTM_STATS_NUM_AVG - 1);
+
+            BT_TRACE_3(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "throughput_avg: %8u (kbytes/sec), ack_delay_avg: %8u ms, ack_q_count_avg: %8u",
+                    throughput_avg, ack_delay_avg, ack_q_count_avg );
+
+            GKI_freebuf(p_str);
+        }
+
+        BT_TRACE_0(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC,
+                   "---");
+    }
+#endif
+
+    memset (p_fcrb, 0, sizeof (tL2C_FCRB));
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_clone_buf
+**
+** Description      This function allocates and copies requested part of a buffer
+**                  at a new-offset.
+**
+** Returns          pointer to new buffer
+**
+*******************************************************************************/
+BT_HDR *l2c_fcr_clone_buf (BT_HDR *p_buf, UINT16 new_offset, UINT16 no_of_bytes, UINT8 pool)
+{
+    BT_HDR *p_buf2;
+
+    /* If using the common pool, should be at least 10% free. */
+    if ( (pool == HCI_ACL_POOL_ID) && (GKI_poolutilization (pool) > 90) )
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - failed to clone buffer on HCI_ACL_POOL_ID Utilization: %u", GKI_poolutilization(pool));
+        return (NULL);
+    }
+
+    if ((p_buf2 = (BT_HDR *)GKI_getpoolbuf(pool)) != NULL)
+    {
+        UINT16    pool_buf_size = GKI_get_pool_bufsize (pool);
+
+        /* Make sure buffer fits into buffer pool */
+        if ((no_of_bytes + sizeof(BT_HDR) + new_offset) > pool_buf_size)
+        {
+            L2CAP_TRACE_ERROR5("##### l2c_fcr_clone_buf (NumBytes %d) -> Exceeds poolsize %d [bytes %d + BT_HDR %d + offset %d]",
+                               (no_of_bytes + sizeof(BT_HDR) + new_offset),
+                               pool_buf_size, no_of_bytes, sizeof(BT_HDR),
+                               new_offset);
+
+            GKI_freebuf(p_buf2);
+            return (NULL);
+        }
+
+        p_buf2->offset = new_offset;
+        p_buf2->len    = no_of_bytes;
+
+        memcpy (((UINT8 *)(p_buf2 + 1)) + p_buf2->offset,
+                ((UINT8 *)(p_buf + 1))  + p_buf->offset,
+                no_of_bytes);
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR2 ("L2CAP - failed to clone buffer, Pool: %u  Count: %u", pool,  GKI_poolfreecount(pool));
+    }
+
+    return (p_buf2);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_is_flow_controlled
+**
+** Description      This function checks if the CCB is flow controlled by peer.
+**
+** Returns          The control word
+**
+*******************************************************************************/
+BOOLEAN l2c_fcr_is_flow_controlled (tL2C_CCB *p_ccb)
+{
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+    {
+        /* Check if remote side flowed us off or the transmit window is full */
+        if ( (p_ccb->fcrb.remote_busy == TRUE)
+         ||  (p_ccb->fcrb.waiting_for_ack_q.count >= p_ccb->peer_cfg.fcr.tx_win_sz) )
+        {
+#if (L2CAP_ERTM_STATS == TRUE)
+            if (p_ccb->xmit_hold_q.count != 0)
+            {
+                p_ccb->fcrb.xmit_window_closed++;
+
+                if ((p_ccb->p_lcb->sent_not_acked < 2)&&(l2cb.controller_xmit_window > 0))
+                    p_ccb->fcrb.controller_idle++;
+            }
+#endif
+            return (TRUE);
+        }
+    }
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         prepare_I_frame
+**
+** Description      This function sets the FCR variables in an I-frame that is
+**                  about to be sent to HCI for transmission. This may be the
+**                  first time the I-frame is sent, or a retransmission
+**
+** Returns          -
+**
+*******************************************************************************/
+static void prepare_I_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, BOOLEAN is_retransmission)
+{
+    tL2C_FCRB   *p_fcrb = &p_ccb->fcrb;
+    UINT8       *p;
+    UINT16      fcs;
+    UINT16      ctrl_word;
+    BOOLEAN     set_f_bit = p_fcrb->send_f_rsp;
+
+    p_fcrb->send_f_rsp = FALSE;
+
+    if (is_retransmission)
+    {
+        /* Get the old control word and clear out the old req_seq and F bits */
+        p = ((UINT8 *) (p_buf+1)) + p_buf->offset + L2CAP_PKT_OVERHEAD;
+
+        STREAM_TO_UINT16 (ctrl_word, p);
+
+        ctrl_word  &= ~(L2CAP_FCR_REQ_SEQ_BITS + L2CAP_FCR_F_BIT);
+    }
+    else
+    {
+        ctrl_word  = p_buf->layer_specific & L2CAP_FCR_SEG_BITS;                /* SAR bits */
+        ctrl_word |= (p_fcrb->next_tx_seq << L2CAP_FCR_TX_SEQ_BITS_SHIFT);      /* Tx Seq */
+
+        p_fcrb->next_tx_seq = (p_fcrb->next_tx_seq + 1) & L2CAP_FCR_SEQ_MODULO;
+    }
+
+    /* Set the F-bit and reqseq only if using re-transmission mode */
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+    {
+        if (set_f_bit)
+            ctrl_word |= L2CAP_FCR_F_BIT;
+
+        ctrl_word |= (p_fcrb->next_seq_expected) << L2CAP_FCR_REQ_SEQ_BITS_SHIFT;
+
+        p_fcrb->last_ack_sent = p_ccb->fcrb.next_seq_expected;
+
+        if (p_ccb->fcrb.ack_timer.in_use)
+            btu_stop_quick_timer (&p_ccb->fcrb.ack_timer);
+    }
+
+    /* Set the control word */
+    p = ((UINT8 *) (p_buf+1)) + p_buf->offset + L2CAP_PKT_OVERHEAD;
+
+    UINT16_TO_STREAM (p, ctrl_word);
+
+    /* Compute the FCS and add to the end of the buffer if not bypassed */
+    if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+    {
+        /* length field in l2cap header has to include FCS length */
+        p = ((UINT8 *) (p_buf+1)) + p_buf->offset;
+        UINT16_TO_STREAM (p, p_buf->len + L2CAP_FCS_LEN - L2CAP_PKT_OVERHEAD);
+
+        /* Calculate the FCS */
+        fcs = l2c_fcr_tx_get_fcs(p_buf);
+
+        /* Point to the end of the buffer and put the FCS there */
+        p = ((UINT8 *) (p_buf+1)) + p_buf->offset + p_buf->len;
+
+        UINT16_TO_STREAM (p, fcs);
+
+        p_buf->len += L2CAP_FCS_LEN;
+    }
+
+#if BT_TRACE_VERBOSE == TRUE
+    if (is_retransmission)
+    {
+        L2CAP_TRACE_EVENT6 ("L2CAP eRTM ReTx I-frame  CID: 0x%04x  Len: %u  SAR: %s  TxSeq: %u  ReqSeq: %u  F: %u",
+                            p_ccb->local_cid, p_buf->len,
+                            SAR_types[(ctrl_word & L2CAP_FCR_SAR_BITS) >> L2CAP_FCR_SAR_BITS_SHIFT],
+                            (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+    }
+    else
+    {
+        L2CAP_TRACE_EVENT6 ("L2CAP eRTM Tx I-frame CID: 0x%04x  Len: %u  SAR: %-12s  TxSeq: %u  ReqSeq: %u  F: %u",
+                            p_ccb->local_cid, p_buf->len,
+                            SAR_types[(ctrl_word & L2CAP_FCR_SAR_BITS) >> L2CAP_FCR_SAR_BITS_SHIFT],
+                            (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+    }
+#endif
+
+    /* Start the retransmission timer if not already running */
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+        l2c_fcr_start_timer (p_ccb);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_send_S_frame
+**
+** Description      This function formats and sends an S-frame for transmission.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_send_S_frame (tL2C_CCB *p_ccb, UINT16 function_code, UINT16 pf_bit)
+{
+    BT_HDR      *p_buf;
+    UINT8       *p;
+    UINT16      ctrl_word;
+    UINT16      fcs;
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+    /* Only used for conformance testing */
+    if (l2c_bypass_sframe_packet (p_ccb))
+        return;
+#endif
+
+    if ((!p_ccb->in_use) || (p_ccb->chnl_state != CST_OPEN))
+        return;
+
+#if (L2CAP_ERTM_STATS == TRUE)
+     p_ccb->fcrb.s_frames_sent[function_code]++;
+#endif
+
+    if (pf_bit == L2CAP_FCR_P_BIT)
+    {
+        p_ccb->fcrb.wait_ack = TRUE;
+
+        l2c_fcr_stop_timer (p_ccb);         /* Restart the monitor timer */
+        l2c_fcr_start_timer (p_ccb);
+    }
+
+    /* Create the control word to use */
+    ctrl_word = (function_code << L2CAP_FCR_SUP_SHIFT) | L2CAP_FCR_S_FRAME_BIT;
+    ctrl_word |= (p_ccb->fcrb.next_seq_expected << L2CAP_FCR_REQ_SEQ_BITS_SHIFT);
+    ctrl_word |= pf_bit;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (L2CAP_CMD_POOL_ID)) != NULL)
+    {
+        p_buf->offset = HCI_DATA_PREAMBLE_SIZE;
+        p_buf->len    = L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD;
+
+        /* Set the pointer to the beginning of the data */
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+        /* Put in the L2CAP header */
+        UINT16_TO_STREAM (p, L2CAP_FCR_OVERHEAD + L2CAP_FCS_LEN);
+        UINT16_TO_STREAM (p, p_ccb->remote_cid);
+        UINT16_TO_STREAM (p, ctrl_word);
+
+        /* Compute the FCS and add to the end of the buffer if not bypassed */
+        if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+        {
+            fcs = l2c_fcr_tx_get_fcs (p_buf);
+
+            UINT16_TO_STREAM (p, fcs);
+            p_buf->len += L2CAP_FCS_LEN;
+        }
+        else /* rewrite the length without FCS length */
+        {
+            p -= 6;
+            UINT16_TO_STREAM (p, L2CAP_FCR_OVERHEAD);
+        }
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+        /* Get out if packet was dropped */
+        if (l2c_corrupt_the_fcr_packet (p_ccb, p_buf, FALSE, ctrl_word))
+            return;
+#endif
+        /* Now, the HCI transport header */
+        p_buf->layer_specific = L2CAP_NON_FLUSHABLE_PKT;
+        l2cu_set_acl_hci_header (p_buf, p_ccb);
+
+#if BT_TRACE_VERBOSE == TRUE
+        if ((((ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT) == 1)
+         || (((ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT) == 3))
+        {
+            L2CAP_TRACE_WARNING6 ("L2CAP eRTM Tx S-frame  CID: 0x%04x  ctrlword: 0x%04x  Type: %s  ReqSeq: %u  P: %u  F: %u",
+                            p_ccb->local_cid, ctrl_word,
+                            SUP_types[(ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT],
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_P_BIT) >> L2CAP_FCR_P_BIT_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+            L2CAP_TRACE_WARNING1 ("                  Buf Len: %u", p_buf->len);
+        }
+        else
+        {
+            L2CAP_TRACE_EVENT6 ("L2CAP eRTM Tx S-frame  CID: 0x%04x  ctrlword: 0x%04x  Type: %s  ReqSeq: %u  P: %u  F: %u",
+                            p_ccb->local_cid, ctrl_word,
+                            SUP_types[(ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT],
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_P_BIT) >> L2CAP_FCR_P_BIT_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+            L2CAP_TRACE_EVENT1 ("                  Buf Len: %u", p_buf->len);
+        }
+#endif  /* BT_TRACE_VERBOSE */
+
+        l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+
+        p_ccb->fcrb.last_ack_sent = p_ccb->fcrb.next_seq_expected;
+
+        if (p_ccb->fcrb.ack_timer.in_use)
+            btu_stop_quick_timer (&p_ccb->fcrb.ack_timer);
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR2 ("l2c_fcr_send_S_frame(No Resources) cid 0x%04x, Type: 0x%4x",
+                             p_ccb->local_cid, function_code);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_proc_pdu
+**
+** Description      This function is the entry point for processing of a
+**                  received PDU when in flow control and/or retransmission modes.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_proc_pdu (tL2C_CCB *p_ccb, BT_HDR *p_buf)
+{
+    UINT8       *p;
+    UINT16      fcs;
+    UINT16      min_pdu_len;
+    UINT16      ctrl_word;
+
+    /* Check the length */
+    min_pdu_len = (p_ccb->bypass_fcs == L2CAP_BYPASS_FCS) ?
+                  (UINT16)L2CAP_FCR_OVERHEAD : (UINT16)(L2CAP_FCS_LEN + L2CAP_FCR_OVERHEAD);
+
+    if (p_buf->len < min_pdu_len)
+    {
+        L2CAP_TRACE_WARNING2 ("Rx L2CAP PDU: CID: 0x%04x  Len too short: %u", p_ccb->local_cid, p_buf->len);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_STREAM_MODE)
+    {
+        process_stream_frame (p_ccb, p_buf);
+        return;
+    }
+
+#if BT_TRACE_VERBOSE == TRUE
+    /* Get the control word */
+    p = ((UINT8 *)(p_buf+1)) + p_buf->offset;
+    STREAM_TO_UINT16 (ctrl_word, p);
+
+    if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+    {
+        if ((((ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT) == 1)
+         || (((ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT) == 3))
+        {
+            /* REJ or SREJ */
+            L2CAP_TRACE_WARNING6 ("L2CAP eRTM Rx S-frame: cid: 0x%04x  Len: %u  Type: %s  ReqSeq: %u  P: %u  F: %u",
+                            p_ccb->local_cid, p_buf->len,
+                            SUP_types[(ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT],
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_P_BIT) >> L2CAP_FCR_P_BIT_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+        }
+        else
+        {
+            L2CAP_TRACE_EVENT6 ("L2CAP eRTM Rx S-frame: cid: 0x%04x  Len: %u  Type: %s  ReqSeq: %u  P: %u  F: %u",
+                            p_ccb->local_cid, p_buf->len,
+                            SUP_types[(ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT],
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_P_BIT) >> L2CAP_FCR_P_BIT_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+        }
+    }
+    else
+    {
+        L2CAP_TRACE_EVENT6 ("L2CAP eRTM Rx I-frame: cid: 0x%04x  Len: %u  SAR: %-12s  TxSeq: %u  ReqSeq: %u  F: %u",
+                            p_ccb->local_cid, p_buf->len,
+                            SAR_types[(ctrl_word & L2CAP_FCR_SAR_BITS) >> L2CAP_FCR_SAR_BITS_SHIFT],
+                            (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                            (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+    }
+
+    L2CAP_TRACE_EVENT6 ("      eRTM Rx Nxt_tx_seq %u, Lst_rx_ack %u, Nxt_seq_exp %u, Lst_ack_snt %u, wt_q.cnt %u, tries %u",
+                        p_ccb->fcrb.next_tx_seq, p_ccb->fcrb.last_rx_ack, p_ccb->fcrb.next_seq_expected,
+                        p_ccb->fcrb.last_ack_sent, p_ccb->fcrb.waiting_for_ack_q.count, p_ccb->fcrb.num_tries);
+
+#endif /* BT_TRACE_VERBOSE */
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+    p = ((UINT8 *)(p_buf+1)) + p_buf->offset;
+    STREAM_TO_UINT16 (ctrl_word, p);
+
+    /* Get out if packet was dropped */
+    if (l2c_corrupt_the_fcr_packet (p_ccb, p_buf, TRUE, ctrl_word))
+        return;
+#endif  /* L2CAP_CORRUPT_ERTM_PKTS */
+
+    /* Verify FCS if using */
+    if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+    {
+        p = ((UINT8 *)(p_buf+1)) + p_buf->offset + p_buf->len - L2CAP_FCS_LEN;
+
+        /* Extract and drop the FCS from the packet */
+        STREAM_TO_UINT16 (fcs, p);
+        p_buf->len -= L2CAP_FCS_LEN;
+
+        if (l2c_fcr_rx_get_fcs(p_buf) != fcs)
+        {
+            L2CAP_TRACE_WARNING1 ("Rx L2CAP PDU: CID: 0x%04x  BAD FCS", p_ccb->local_cid);
+            GKI_freebuf(p_buf);
+            return;
+        }
+    }
+
+    /* Get the control word */
+    p = ((UINT8 *)(p_buf+1)) + p_buf->offset;
+
+    STREAM_TO_UINT16 (ctrl_word, p);
+
+    p_buf->len    -= L2CAP_FCR_OVERHEAD;
+    p_buf->offset += L2CAP_FCR_OVERHEAD;
+
+    /* If we had a poll bit outstanding, check if we got a final response */
+    if (p_ccb->fcrb.wait_ack)
+    {
+        /* If final bit not set, ignore the frame unless it is a polled S-frame */
+        if ( !(ctrl_word & L2CAP_FCR_F_BIT) )
+        {
+            if ( (ctrl_word & L2CAP_FCR_P_BIT) && (ctrl_word & L2CAP_FCR_S_FRAME_BIT) )
+            {
+                if (p_ccb->fcrb.srej_sent)
+                    l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_SREJ, L2CAP_FCR_F_BIT);
+                else if (p_ccb->fcrb.local_busy)
+                    l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, L2CAP_FCR_F_BIT);
+                else
+                    l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_F_BIT);
+
+                /* Got a poll while in wait_ack state, so re-start our timer with 1-second */
+                /* This is a small optimization... the monitor timer is 12 secs, but we saw */
+                /* that if the other side sends us a poll when we are waiting for a final,  */
+                /* then it speeds up recovery significantly if we poll him back soon after his poll. */
+                btu_start_quick_timer (&p_ccb->fcrb.mon_retrans_timer, BTU_TTYPE_L2CAP_CHNL, QUICK_TIMER_TICKS_PER_SEC);
+            }
+            GKI_freebuf (p_buf);
+            return;
+        }
+
+        p_ccb->fcrb.wait_ack  = FALSE;
+
+        /* P and F are mutually exclusive */
+        if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+            ctrl_word &= ~L2CAP_FCR_P_BIT;
+
+        if (p_ccb->fcrb.waiting_for_ack_q.count == 0)
+            p_ccb->fcrb.num_tries = 0;
+
+        l2c_fcr_stop_timer (p_ccb);
+    }
+    else
+    {
+        /* Otherwise, ensure the final bit is ignored */
+        ctrl_word &= ~L2CAP_FCR_F_BIT;
+    }
+
+    /* Process receive sequence number */
+    if (!process_reqseq (p_ccb, ctrl_word))
+    {
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+     /* Process based on whether it is an S-frame or an I-frame */
+    if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+        process_s_frame (p_ccb, p_buf, ctrl_word);
+    else
+        process_i_frame (p_ccb, p_buf, ctrl_word, FALSE);
+
+    /* Return if the channel got disconnected by a bad packet or max retransmissions */
+    if ( (!p_ccb->in_use) || (p_ccb->chnl_state != CST_OPEN) )
+        return;
+
+    /* If we have some buffers held while doing SREJ, and SREJ has cleared, process them now */
+    if ( (!p_ccb->fcrb.local_busy) && (!p_ccb->fcrb.srej_sent) && (p_ccb->fcrb.srej_rcv_hold_q.count > 0) )
+    {
+        BUFFER_Q temp_q = p_ccb->fcrb.srej_rcv_hold_q;
+
+        GKI_init_q (&p_ccb->fcrb.srej_rcv_hold_q);
+
+        while ((p_buf = (BT_HDR *)GKI_dequeue (&temp_q)) != NULL)
+        {
+            if (p_ccb->in_use && (p_ccb->chnl_state == CST_OPEN))
+            {
+                /* Get the control word */
+                p = ((UINT8 *)(p_buf+1)) + p_buf->offset - L2CAP_FCR_OVERHEAD;
+
+                STREAM_TO_UINT16 (ctrl_word, p);
+
+                L2CAP_TRACE_DEBUG3 ("l2c_fcr_proc_pdu() CID: 0x%04x  Process Buffer from SREJ_Hold_Q   TxSeq: %u  Expected_Seq: %u",
+                                    p_ccb->local_cid, (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT,
+                                    p_ccb->fcrb.next_seq_expected);
+
+                /* Process the SREJ held I-frame, but do not send an RR for each individual frame */
+                process_i_frame (p_ccb, p_buf, ctrl_word, TRUE);
+            }
+            else
+                GKI_freebuf (p_buf);
+
+            /* If more frames were lost during SREJ, send a REJ */
+            if (p_ccb->fcrb.rej_after_srej)
+            {
+                p_ccb->fcrb.rej_after_srej = FALSE;
+                p_ccb->fcrb.rej_sent       = TRUE;
+
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_REJ, 0);
+            }
+        }
+
+        /* Now, if needed, send one RR for the whole held queue */
+        if ( (!p_ccb->fcrb.local_busy) && (!p_ccb->fcrb.rej_sent) && (!p_ccb->fcrb.srej_sent)
+         &&  (p_ccb->fcrb.next_seq_expected != p_ccb->fcrb.last_ack_sent) )
+            l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, 0);
+        else
+        {
+            L2CAP_TRACE_DEBUG6 ("l2c_fcr_proc_pdu() not sending RR CID: 0x%04x  local_busy:%d rej_sent:%d srej_sent:%d Expected_Seq:%u Last_Ack:%u",
+                                p_ccb->local_cid, p_ccb->fcrb.local_busy, p_ccb->fcrb.rej_sent, p_ccb->fcrb.srej_sent, p_ccb->fcrb.next_seq_expected,
+                                p_ccb->fcrb.last_ack_sent);
+        }
+    }
+
+    /* If a window has opened, check if we can send any more packets */
+    if ( (p_ccb->fcrb.retrans_q.count || p_ccb->xmit_hold_q.count)
+      && (p_ccb->fcrb.wait_ack == FALSE)
+      && (l2c_fcr_is_flow_controlled (p_ccb) == FALSE) )
+    {
+        l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_proc_tout
+**
+** Description      Handle a timeout. We should be in error recovery state.
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_proc_tout (tL2C_CCB *p_ccb)
+{
+    L2CAP_TRACE_DEBUG5 ("l2c_fcr_proc_tout:  CID: 0x%04x  num_tries: %u (max: %u)  wait_ack: %u  ack_q_count: %u",
+                        p_ccb->local_cid, p_ccb->fcrb.num_tries, p_ccb->peer_cfg.fcr.max_transmit,
+                        p_ccb->fcrb.wait_ack, p_ccb->fcrb.waiting_for_ack_q.count);
+
+#if (L2CAP_ERTM_STATS == TRUE)
+    p_ccb->fcrb.retrans_touts++;
+#endif
+
+    if ( (p_ccb->peer_cfg.fcr.max_transmit != 0) && (++p_ccb->fcrb.num_tries > p_ccb->peer_cfg.fcr.max_transmit) )
+    {
+        l2cu_disconnect_chnl (p_ccb);
+    }
+    else
+    {
+        if (!p_ccb->fcrb.srej_sent && !p_ccb->fcrb.rej_sent)
+        {
+            if (p_ccb->fcrb.local_busy)
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, L2CAP_FCR_P_BIT);
+            else
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_P_BIT);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_proc_ack_tout
+**
+** Description      Send RR/RNR if we have not acked I frame
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2c_fcr_proc_ack_tout (tL2C_CCB *p_ccb)
+{
+    L2CAP_TRACE_DEBUG5 ("l2c_fcr_proc_ack_tout:  CID: 0x%04x State: %u  Wack:%u  Rq:%d  Acked:%d", p_ccb->local_cid,
+                        p_ccb->chnl_state, p_ccb->fcrb.wait_ack, p_ccb->fcrb.next_seq_expected, p_ccb->fcrb.last_ack_sent);
+
+    if ( (p_ccb->chnl_state == CST_OPEN) && (!p_ccb->fcrb.wait_ack)
+      && (p_ccb->fcrb.last_ack_sent != p_ccb->fcrb.next_seq_expected) )
+    {
+#if (L2CAP_ERTM_STATS == TRUE)
+        p_ccb->fcrb.xmit_ack_touts++;
+#endif
+        if (p_ccb->fcrb.local_busy)
+            l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, 0);
+        else
+            l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, 0);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         process_reqseq
+**
+** Description      Handle receive sequence number
+**
+** Returns          -
+**
+*******************************************************************************/
+static BOOLEAN process_reqseq (tL2C_CCB *p_ccb, UINT16 ctrl_word)
+{
+    tL2C_FCRB   *p_fcrb = &p_ccb->fcrb;
+    UINT8       req_seq, num_bufs_acked, xx;
+    UINT16      ls;
+    UINT16      full_sdus_xmitted;
+
+    /* Receive sequence number does not ack anything for SREJ with P-bit set to zero */
+    if ( (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+     &&  ((ctrl_word & L2CAP_FCR_SUP_BITS) == (L2CAP_FCR_SUP_SREJ << L2CAP_FCR_SUP_SHIFT))
+     &&  ((ctrl_word & L2CAP_FCR_P_BIT) == 0) )
+    {
+        /* If anything still waiting for ack, restart the timer if it was stopped */
+        if (p_fcrb->waiting_for_ack_q.count)
+            l2c_fcr_start_timer (p_ccb);
+
+        return (TRUE);
+    }
+
+    /* Extract the receive sequence number from the control word */
+    req_seq = (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT;
+
+    num_bufs_acked = (req_seq - p_fcrb->last_rx_ack) & L2CAP_FCR_SEQ_MODULO;
+
+    /* Verify the request sequence is in range before proceeding */
+    if (num_bufs_acked > p_fcrb->waiting_for_ack_q.count)
+    {
+        /* The channel is closed if ReqSeq is not in range */
+        L2CAP_TRACE_WARNING4 ("L2CAP eRTM Frame BAD Req_Seq - ctrl_word: 0x%04x  req_seq 0x%02x  last_rx_ack: 0x%02x  QCount: %u",
+                               ctrl_word, req_seq, p_fcrb->last_rx_ack, p_fcrb->waiting_for_ack_q.count);
+
+        l2cu_disconnect_chnl (p_ccb);
+        return (FALSE);
+    }
+
+/*
+    L2CAP_TRACE_DEBUG3 ("L2CAP process_reqseq 0x%02x  last_rx_ack: 0x%02x  QCount: %u",
+                           req_seq, p_fcrb->last_rx_ack, p_fcrb->waiting_for_ack_q.count);
+*/
+    p_fcrb->last_rx_ack = req_seq;
+
+    /* Now we can release all acknowledged frames, and restart the retransmission timer if needed */
+    if (num_bufs_acked != 0)
+    {
+        p_fcrb->num_tries = 0;
+        full_sdus_xmitted = 0;
+
+#if (L2CAP_ERTM_STATS == TRUE)
+        l2c_fcr_collect_ack_delay (p_ccb, num_bufs_acked);
+#endif
+
+        for (xx = 0; xx < num_bufs_acked; xx++)
+        {
+            ls = ((BT_HDR *)(p_fcrb->waiting_for_ack_q.p_first))->layer_specific & L2CAP_FCR_SAR_BITS;
+
+            if ( (ls == L2CAP_FCR_UNSEG_SDU) || (ls == L2CAP_FCR_END_SDU) )
+                full_sdus_xmitted++;
+
+            GKI_freebuf (GKI_dequeue (&p_fcrb->waiting_for_ack_q));
+        }
+
+        /* If we are still in a wait_ack state, do not mess with the timer */
+        if (!p_ccb->fcrb.wait_ack)
+            l2c_fcr_stop_timer (p_ccb);
+
+        /* Check if we need to call the "packet_sent" callback */
+        if ( (p_ccb->p_rcb) && (p_ccb->p_rcb->api.pL2CA_TxComplete_Cb) && (full_sdus_xmitted) )
+        {
+            /* Special case for eRTM, if all packets sent, send 0xFFFF */
+            if ( (p_fcrb->waiting_for_ack_q.count == 0) && (p_ccb->xmit_hold_q.count == 0) )
+                full_sdus_xmitted = 0xFFFF;
+
+            (*p_ccb->p_rcb->api.pL2CA_TxComplete_Cb)(p_ccb->local_cid, full_sdus_xmitted);
+        }
+    }
+
+    /* If anything still waiting for ack, restart the timer if it was stopped */
+    if (p_fcrb->waiting_for_ack_q.count)
+        l2c_fcr_start_timer (p_ccb);
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         process_s_frame
+**
+** Description      Process an S frame
+**
+** Returns          -
+**
+*******************************************************************************/
+static void process_s_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word)
+{
+    tL2C_FCRB   *p_fcrb      = &p_ccb->fcrb;
+    UINT16      s_frame_type = (ctrl_word & L2CAP_FCR_SUP_BITS) >> L2CAP_FCR_SUP_SHIFT;
+    BOOLEAN     remote_was_busy;
+    BOOLEAN     all_ok = TRUE;
+
+    if (p_buf->len != 0)
+    {
+        L2CAP_TRACE_WARNING1 ("Incorrect S-frame Length (%d)", p_buf->len);
+    }
+
+    L2CAP_TRACE_DEBUG2 ("process_s_frame ctrl_word 0x%04x fcrb_remote_busy:%d", ctrl_word, p_fcrb->remote_busy);
+
+#if (L2CAP_ERTM_STATS == TRUE)
+    p_ccb->fcrb.s_frames_rcvd[s_frame_type]++;
+#endif
+
+    if (ctrl_word & L2CAP_FCR_P_BIT)
+    {
+        p_fcrb->rej_sent   = FALSE;             /* After checkpoint, we can send anoher REJ */
+        p_fcrb->send_f_rsp = TRUE;              /* Set a flag in case an I-frame is pending */
+    }
+
+    switch (s_frame_type)
+    {
+    case L2CAP_FCR_SUP_RR:
+        remote_was_busy     = p_fcrb->remote_busy;
+        p_fcrb->remote_busy = FALSE;
+
+        if ( (ctrl_word & L2CAP_FCR_F_BIT) || (remote_was_busy) )
+            all_ok = retransmit_i_frames (p_ccb, L2C_FCR_RETX_ALL_PKTS);
+        break;
+
+    case L2CAP_FCR_SUP_REJ:
+        p_fcrb->remote_busy = FALSE;
+        all_ok = retransmit_i_frames (p_ccb, L2C_FCR_RETX_ALL_PKTS);
+        break;
+
+    case L2CAP_FCR_SUP_RNR:
+        p_fcrb->remote_busy = TRUE;
+        l2c_fcr_stop_timer (p_ccb);
+        break;
+
+    case L2CAP_FCR_SUP_SREJ:
+        p_fcrb->remote_busy = FALSE;
+        all_ok = retransmit_i_frames (p_ccb, (UINT8)((ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT));
+        break;
+    }
+
+    if (all_ok)
+    {
+        /* If polled, we need to respond with F-bit. Note, we may have sent a I-frame with the F-bit */
+        if (p_fcrb->send_f_rsp)
+        {
+            if (p_fcrb->srej_sent)
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_SREJ, L2CAP_FCR_F_BIT);
+            else if (p_fcrb->local_busy)
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, L2CAP_FCR_F_BIT);
+            else
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, L2CAP_FCR_F_BIT);
+
+            p_fcrb->send_f_rsp = FALSE;
+        }
+    }
+    else
+    {
+        L2CAP_TRACE_DEBUG0 ("process_s_frame hit_max_retries");
+    }
+
+    GKI_freebuf (p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         process_i_frame
+**
+** Description      Process an I frame
+**
+** Returns          -
+**
+*******************************************************************************/
+static void process_i_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word, BOOLEAN delay_ack)
+{
+    tL2C_FCRB   *p_fcrb = &p_ccb->fcrb;
+    UINT8       tx_seq, num_lost, num_to_ack, next_srej;
+
+    /* If we were doing checkpoint recovery, first retransmit all unacked I-frames */
+    if (ctrl_word & L2CAP_FCR_F_BIT)
+    {
+        if (!retransmit_i_frames (p_ccb, L2C_FCR_RETX_ALL_PKTS))
+        {
+            GKI_freebuf(p_buf);
+            return;
+        }
+    }
+
+#if (L2CAP_ERTM_STATS == TRUE)
+    p_ccb->fcrb.ertm_pkt_counts[1]++;
+    p_ccb->fcrb.ertm_byte_counts[1] += p_buf->len;
+#endif
+
+    /* Extract the sequence number */
+    tx_seq = (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT;
+
+    /* If we have flow controlled the peer, ignore any bad I-frames from him */
+    if ( (tx_seq != p_fcrb->next_seq_expected) && (p_fcrb->local_busy) )
+    {
+        L2CAP_TRACE_WARNING1 ("Dropping bad I-Frame since we flowed off, tx_seq:%u", tx_seq);
+        l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, 0);
+        GKI_freebuf(p_buf);
+        return;
+    }
+
+    /* If there are no free buffers in the user Rx queue, drop the  */
+    /* received buffer now before we update any sequence numbers    */
+    if (GKI_poolfreecount (p_ccb->ertm_info.user_rx_pool_id) == 0)
+    {
+        L2CAP_TRACE_WARNING4 ("L2CAP CID: 0x%04x  Dropping I-Frame seq: %u  User RX Pool: %u  (Size: %u)  has no free buffers!!",
+                              p_ccb->local_cid, tx_seq, p_ccb->ertm_info.user_rx_pool_id,
+                              GKI_poolcount (p_ccb->ertm_info.user_rx_pool_id));
+        GKI_freebuf(p_buf);
+        return;
+    }
+
+    /* Check if tx-sequence is the expected one */
+    if (tx_seq != p_fcrb->next_seq_expected)
+    {
+        num_lost = (tx_seq - p_fcrb->next_seq_expected) & L2CAP_FCR_SEQ_MODULO;
+
+        /* Is the frame a duplicate ? If so, just drop it */
+        if (num_lost >= p_ccb->our_cfg.fcr.tx_win_sz)
+        {
+            /* Duplicate - simply drop it */
+            L2CAP_TRACE_WARNING2 ("process_i_frame() Dropping Duplicate Frame tx_seq:%u  ExpectedTxSeq %u", tx_seq, p_fcrb->next_seq_expected);
+            GKI_freebuf(p_buf);
+        }
+        else
+        {
+            L2CAP_TRACE_WARNING6 ("process_i_frame() CID: 0x%04x  Lost: %u  tx_seq:%u  ExpTxSeq %u  Rej: %u  SRej: %u",
+                                 p_ccb->local_cid, num_lost, tx_seq, p_fcrb->next_seq_expected, p_fcrb->rej_sent, p_fcrb->srej_sent);
+
+            if (p_fcrb->srej_sent)
+            {
+                /* If SREJ sent, save the frame for later processing as long as it is in sequence */
+                next_srej = (((BT_HDR *)p_fcrb->srej_rcv_hold_q.p_last)->layer_specific + 1) & L2CAP_FCR_SEQ_MODULO;
+
+                if ( (tx_seq == next_srej) && (p_fcrb->srej_rcv_hold_q.count < p_ccb->our_cfg.fcr.tx_win_sz) )
+                {
+                    /* If user gave us a pool for held rx buffers, use that */
+                    if (p_ccb->ertm_info.fcr_rx_pool_id != HCI_ACL_POOL_ID)
+                    {
+                        BT_HDR *p_buf2;
+
+                        /* Adjust offset and len so that control word is copied */
+                        p_buf->offset -= L2CAP_FCR_OVERHEAD;
+                        p_buf->len    += L2CAP_FCR_OVERHEAD;
+
+                        p_buf2 = l2c_fcr_clone_buf (p_buf, p_buf->offset, p_buf->len, p_ccb->ertm_info.fcr_rx_pool_id);
+
+                        if (p_buf2)
+                        {
+                            GKI_freebuf (p_buf);
+                            p_buf = p_buf2;
+                        }
+                        p_buf->offset += L2CAP_FCR_OVERHEAD;
+                        p_buf->len -= L2CAP_FCR_OVERHEAD;
+                    }
+                    L2CAP_TRACE_DEBUG4 ("process_i_frame() Lost: %u  tx_seq:%u  ExpTxSeq %u  Rej: %u  SRej1",
+                                         num_lost, tx_seq, p_fcrb->next_seq_expected, p_fcrb->rej_sent);
+
+                    p_buf->layer_specific = tx_seq;
+                    GKI_enqueue (&p_fcrb->srej_rcv_hold_q, p_buf);
+                }
+                else
+                {
+                    L2CAP_TRACE_WARNING4 ("process_i_frame() CID: 0x%04x  frame dropped in Srej Sent next_srej:%u  hold_q.count:%u  win_sz:%u",
+                                         p_ccb->local_cid, next_srej, p_fcrb->srej_rcv_hold_q.count, p_ccb->our_cfg.fcr.tx_win_sz);
+
+                    p_fcrb->rej_after_srej = TRUE;
+                    GKI_freebuf (p_buf);
+                }
+            }
+            else if (p_fcrb->rej_sent)
+            {
+                L2CAP_TRACE_WARNING5 ("process_i_frame() CID: 0x%04x  Lost: %u  tx_seq:%u  ExpTxSeq %u  Rej: 1  SRej: %u",
+                                     p_ccb->local_cid, num_lost, tx_seq, p_fcrb->next_seq_expected, p_fcrb->srej_sent);
+
+                /* If REJ sent, just drop the frame */
+                GKI_freebuf (p_buf);
+            }
+            else
+            {
+                L2CAP_TRACE_DEBUG4 ("process_i_frame() CID: 0x%04x  tx_seq:%u  ExpTxSeq %u  Rej: %u",
+                                     p_ccb->local_cid, tx_seq, p_fcrb->next_seq_expected, p_fcrb->rej_sent);
+
+                /* If only one lost, we will send SREJ, otherwise we will send REJ */
+                if (num_lost > 1)
+                {
+                    GKI_freebuf (p_buf);
+                    p_fcrb->rej_sent = TRUE;
+                    l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_REJ, 0);
+                }
+                else
+                {
+                    if (p_fcrb->srej_rcv_hold_q.count != 0)
+                    {
+                        L2CAP_TRACE_ERROR3 ("process_i_frame() CID: 0x%04x  sending SREJ tx_seq:%d hold_q.count:%u",
+                                             p_ccb->local_cid, tx_seq, p_fcrb->srej_rcv_hold_q.count);
+                    }
+                    p_buf->layer_specific = tx_seq;
+                    GKI_enqueue (&p_fcrb->srej_rcv_hold_q, p_buf);
+                    p_fcrb->srej_sent = TRUE;
+                    l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_SREJ, 0);
+                }
+                btu_stop_quick_timer (&p_ccb->fcrb.ack_timer);
+            }
+        }
+        return;
+    }
+
+    /* Seq number is the next expected. Clear possible reject exception in case it occured */
+    p_fcrb->rej_sent = p_fcrb->srej_sent = FALSE;
+
+    /* Adjust the next_seq, so that if the upper layer sends more data in the callback
+       context, the received frame is acked by an I-frame. */
+    p_fcrb->next_seq_expected = (tx_seq + 1) & L2CAP_FCR_SEQ_MODULO;
+
+    /* If any SAR problem in eRTM mode, spec says disconnect. */
+    if (!do_sar_reassembly (p_ccb, p_buf, ctrl_word))
+    {
+        L2CAP_TRACE_WARNING1 ("process_i_frame() CID: 0x%04x  reassembly failed", p_ccb->local_cid);
+        l2cu_disconnect_chnl (p_ccb);
+        return;
+    }
+
+    /* RR optimization - if peer can still send us more, then start an ACK timer */
+    num_to_ack = (p_fcrb->next_seq_expected - p_fcrb->last_ack_sent) & L2CAP_FCR_SEQ_MODULO;
+
+    if ( (num_to_ack < p_ccb->fcrb.max_held_acks) && (!p_fcrb->local_busy) )
+        delay_ack = TRUE;
+
+    /* We should neve never ack frame if we are not in OPEN state */
+    if ((num_to_ack != 0) && p_ccb->in_use && (p_ccb->chnl_state == CST_OPEN))
+    {
+        /* If no frames are awaiting transmission or are held, send an RR or RNR S-frame for ack */
+        if (delay_ack)
+        {
+            /* If it is the first I frame we did not ack, start ack timer */
+            if (!p_ccb->fcrb.ack_timer.in_use)
+            {
+                btu_start_quick_timer (&p_ccb->fcrb.ack_timer, BTU_TTYPE_L2CAP_FCR_ACK,
+                                        (L2CAP_FCR_ACK_TOUT*QUICK_TIMER_TICKS_PER_SEC)/1000);
+            }
+        }
+        else if ( ((p_ccb->xmit_hold_q.count == 0) || (l2c_fcr_is_flow_controlled (p_ccb)))
+               &&  (p_ccb->fcrb.srej_rcv_hold_q.count == 0) )
+        {
+            if (p_fcrb->local_busy)
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RNR, 0);
+            else
+                l2c_fcr_send_S_frame (p_ccb, L2CAP_FCR_SUP_RR, 0);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         process_stream_frame
+**
+** Description      This function processes frames in streaming mode
+**
+** Returns          -
+**
+*******************************************************************************/
+static void process_stream_frame (tL2C_CCB *p_ccb, BT_HDR *p_buf)
+{
+    UINT16      ctrl_word;
+    UINT16      fcs;
+    UINT8       *p;
+    UINT8       tx_seq;
+
+    /* Verify FCS if using */
+    if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+    {
+        p = ((UINT8 *)(p_buf+1)) + p_buf->offset + p_buf->len - L2CAP_FCS_LEN;
+
+        /* Extract and drop the FCS from the packet */
+        STREAM_TO_UINT16 (fcs, p);
+        p_buf->len -= L2CAP_FCS_LEN;
+
+        if (l2c_fcr_rx_get_fcs(p_buf) != fcs)
+        {
+            L2CAP_TRACE_WARNING1 ("Rx L2CAP PDU: CID: 0x%04x  BAD FCS", p_ccb->local_cid);
+            GKI_freebuf(p_buf);
+            return;
+        }
+    }
+
+    /* Get the control word */
+    p = ((UINT8 *)(p_buf+1)) + p_buf->offset;
+
+    STREAM_TO_UINT16 (ctrl_word, p);
+
+    p_buf->len    -= L2CAP_FCR_OVERHEAD;
+    p_buf->offset += L2CAP_FCR_OVERHEAD;
+
+    /* Make sure it is an I-frame */
+    if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+    {
+        L2CAP_TRACE_WARNING2 ("Rx L2CAP PDU: CID: 0x%04x  BAD S-frame in streaming mode  ctrl_word: 0x%04x", p_ccb->local_cid, ctrl_word);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+#if BT_TRACE_VERBOSE == TRUE
+    L2CAP_TRACE_EVENT6 ("L2CAP eRTM Rx I-frame: cid: 0x%04x  Len: %u  SAR: %-12s  TxSeq: %u  ReqSeq: %u  F: %u",
+                        p_ccb->local_cid, p_buf->len,
+                        SAR_types[(ctrl_word & L2CAP_FCR_SAR_BITS) >> L2CAP_FCR_SAR_BITS_SHIFT],
+                        (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT,
+                        (ctrl_word & L2CAP_FCR_REQ_SEQ_BITS) >> L2CAP_FCR_REQ_SEQ_BITS_SHIFT,
+                        (ctrl_word & L2CAP_FCR_F_BIT) >> L2CAP_FCR_F_BIT_SHIFT);
+#endif
+
+    /* Extract the sequence number */
+    tx_seq = (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT;
+
+    /* Check if tx-sequence is the expected one */
+    if (tx_seq != p_ccb->fcrb.next_seq_expected)
+    {
+        L2CAP_TRACE_WARNING4 ("Rx L2CAP PDU: CID: 0x%04x  Lost frames Exp: %u  Got: %u  p_rx_sdu: 0x%08x",
+                                p_ccb->local_cid, p_ccb->fcrb.next_seq_expected, tx_seq, p_ccb->fcrb.p_rx_sdu);
+
+        /* Lost one or more packets, so flush the SAR queue */
+        if (p_ccb->fcrb.p_rx_sdu != NULL)
+        {
+            GKI_freebuf (p_ccb->fcrb.p_rx_sdu);
+            p_ccb->fcrb.p_rx_sdu = NULL;
+        }
+    }
+
+    p_ccb->fcrb.next_seq_expected = (tx_seq + 1) & L2CAP_FCR_SEQ_MODULO;
+
+    if (!do_sar_reassembly (p_ccb, p_buf, ctrl_word))
+    {
+        /* Some sort of SAR error, so flush the SAR queue */
+        if (p_ccb->fcrb.p_rx_sdu != NULL)
+        {
+            GKI_freebuf (p_ccb->fcrb.p_rx_sdu);
+            p_ccb->fcrb.p_rx_sdu = NULL;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         do_sar_reassembly
+**
+** Description      Process SAR bits and re-assemble frame
+**
+** Returns          TRUE if all OK, else FALSE
+**
+*******************************************************************************/
+static BOOLEAN do_sar_reassembly (tL2C_CCB *p_ccb, BT_HDR *p_buf, UINT16 ctrl_word)
+{
+    tL2C_FCRB   *p_fcrb = &p_ccb->fcrb;
+    UINT16      sar_type = ctrl_word & L2CAP_FCR_SEG_BITS;
+    BOOLEAN     packet_ok = TRUE;
+    UINT8       *p;
+
+    /* Check if the SAR state is correct */
+    if ((sar_type == L2CAP_FCR_UNSEG_SDU) || (sar_type == L2CAP_FCR_START_SDU))
+    {
+        if (p_fcrb->p_rx_sdu != NULL)
+        {
+            L2CAP_TRACE_WARNING2 ("SAR - got unexpected unsegmented or start SDU  Expected len: %u  Got so far: %u",
+                                  p_fcrb->rx_sdu_len, p_fcrb->p_rx_sdu->len);
+
+            packet_ok = FALSE;
+        }
+        /* Check the length of the packet */
+        if ( (sar_type == L2CAP_FCR_START_SDU) && (p_buf->len < L2CAP_SDU_LEN_OVERHEAD) )
+        {
+            L2CAP_TRACE_WARNING1 ("SAR start packet too short: %u", p_buf->len);
+            packet_ok = FALSE;
+        }
+    }
+    else
+    {
+        if (p_fcrb->p_rx_sdu == NULL)
+        {
+            L2CAP_TRACE_WARNING0 ("SAR - got unexpected cont or end SDU");
+            packet_ok = FALSE;
+        }
+    }
+
+    if ( (packet_ok) && (sar_type != L2CAP_FCR_UNSEG_SDU) )
+    {
+        p = ((UINT8 *)(p_buf + 1)) + p_buf->offset;
+
+        /* For start SDU packet, extract the SDU length */
+        if (sar_type == L2CAP_FCR_START_SDU)
+        {
+            /* Get the SDU length */
+            STREAM_TO_UINT16 (p_fcrb->rx_sdu_len, p);
+            p_buf->offset += 2;
+            p_buf->len    -= 2;
+
+            if (p_fcrb->rx_sdu_len > p_ccb->max_rx_mtu)
+            {
+                L2CAP_TRACE_WARNING2 ("SAR - SDU len: %u  larger than MTU: %u", p_fcrb->rx_sdu_len, p_fcrb->rx_sdu_len);
+                packet_ok = FALSE;
+            }
+            else if ((p_fcrb->p_rx_sdu = (BT_HDR *)GKI_getpoolbuf (p_ccb->ertm_info.user_rx_pool_id)) == NULL)
+            {
+                L2CAP_TRACE_ERROR1 ("SAR - no buffer for SDU start user_rx_pool_id:%d", p_ccb->ertm_info.user_rx_pool_id);
+                packet_ok = FALSE;
+            }
+            else
+            {
+                p_fcrb->p_rx_sdu->offset = 4; /* this is the minimal offset required by OBX to process incoming packets */
+                p_fcrb->p_rx_sdu->len    = 0;
+            }
+        }
+
+        if (packet_ok)
+        {
+            if ((p_fcrb->p_rx_sdu->len + p_buf->len) > p_fcrb->rx_sdu_len)
+            {
+                L2CAP_TRACE_ERROR4 ("SAR - SDU len exceeded  Type: %u   Lengths: %u %u %u",
+                                    sar_type, p_fcrb->p_rx_sdu->len, p_buf->len, p_fcrb->rx_sdu_len);
+                packet_ok = FALSE;
+            }
+            else if ( (sar_type == L2CAP_FCR_END_SDU) && ((p_fcrb->p_rx_sdu->len + p_buf->len) != p_fcrb->rx_sdu_len) )
+            {
+                L2CAP_TRACE_WARNING3 ("SAR - SDU end rcvd but SDU incomplete: %u %u %u",
+                                      p_fcrb->p_rx_sdu->len, p_buf->len, p_fcrb->rx_sdu_len);
+                packet_ok = FALSE;
+            }
+            else
+            {
+                memcpy (((UINT8 *) (p_fcrb->p_rx_sdu + 1)) + p_fcrb->p_rx_sdu->offset + p_fcrb->p_rx_sdu->len, p, p_buf->len);
+
+                p_fcrb->p_rx_sdu->len += p_buf->len;
+
+                GKI_freebuf (p_buf);
+                p_buf = NULL;
+
+                if (sar_type == L2CAP_FCR_END_SDU)
+                {
+                    p_buf            = p_fcrb->p_rx_sdu;
+                    p_fcrb->p_rx_sdu = NULL;
+                }
+            }
+        }
+    }
+
+    if (packet_ok == FALSE)
+    {
+        GKI_freebuf (p_buf);
+    }
+    else if (p_buf != NULL)
+    {
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+        if (p_ccb->local_cid < L2CAP_BASE_APPL_CID)
+            (*l2cb.fixed_reg[p_ccb->local_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)(p_ccb->p_lcb->remote_bd_addr, p_buf);
+        else
+#endif
+            l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DATA, p_buf);
+    }
+
+    return (packet_ok);
+}
+
+
+/*******************************************************************************
+**
+** Function         retransmit_i_frames
+**
+** Description      This function retransmits i-frames awaiting acks.
+**
+** Returns          BOOLEAN - TRUE if retransmitted
+**
+*******************************************************************************/
+static BOOLEAN retransmit_i_frames (tL2C_CCB *p_ccb, UINT8 tx_seq)
+{
+    BT_HDR      *p_buf, *p_buf2;
+    UINT8       *p;
+    UINT8       buf_seq;
+    UINT16      ctrl_word;
+
+    if ( (p_ccb->fcrb.waiting_for_ack_q.p_first)
+     &&  (p_ccb->peer_cfg.fcr.max_transmit != 0)
+     &&  (p_ccb->fcrb.num_tries >= p_ccb->peer_cfg.fcr.max_transmit) )
+    {
+        L2CAP_TRACE_EVENT5 ("Max Tries Exceeded:  (last_acq: %d  CID: 0x%04x  num_tries: %u (max: %u) ack_q_count: %u",
+                p_ccb->fcrb.last_rx_ack, p_ccb->local_cid, p_ccb->fcrb.num_tries, p_ccb->peer_cfg.fcr.max_transmit,
+                p_ccb->fcrb.waiting_for_ack_q.count);
+
+        l2cu_disconnect_chnl (p_ccb);
+        return (FALSE);
+    }
+
+    /* tx_seq indicates whether to retransmit a specific sequence or all (if == L2C_FCR_RETX_ALL_PKTS) */
+    if (tx_seq != L2C_FCR_RETX_ALL_PKTS)
+    {
+        /* If sending only one, the sequence number tells us which one. Look for it.
+        */
+        for (p_buf = (BT_HDR *)p_ccb->fcrb.waiting_for_ack_q.p_first; p_buf; p_buf = (BT_HDR *)GKI_getnext (p_buf))
+        {
+            /* Get the old control word */
+            p = ((UINT8 *) (p_buf+1)) + p_buf->offset + L2CAP_PKT_OVERHEAD;
+
+            STREAM_TO_UINT16 (ctrl_word, p);
+
+            buf_seq = (ctrl_word & L2CAP_FCR_TX_SEQ_BITS) >> L2CAP_FCR_TX_SEQ_BITS_SHIFT;
+
+            L2CAP_TRACE_DEBUG2 ("retransmit_i_frames()   cur seq: %u  looking for: %u", buf_seq, tx_seq);
+
+            if (tx_seq == buf_seq)
+                break;
+        }
+
+        if (!p_buf)
+        {
+            L2CAP_TRACE_ERROR2 ("retransmit_i_frames() UNKNOWN seq: %u  q_count: %u", tx_seq, p_ccb->fcrb.waiting_for_ack_q.count);
+            return (TRUE);
+        }
+    }
+    else
+    {
+        /* Retransmitting everything. Flush buffers we already put in the link xmit queue.
+        */
+        p_buf = (BT_HDR *)p_ccb->p_lcb->link_xmit_data_q.p_first;
+
+        while (p_buf != NULL)
+        {
+            /* Do not flush other CIDs or partial segments */
+            if ( (p_buf->layer_specific == 0) && (p_buf->event == p_ccb->local_cid) )
+            {
+                p_buf2 = p_buf;
+                p_buf = (BT_HDR *)GKI_getnext (p_buf);
+
+                GKI_remove_from_queue (&p_ccb->p_lcb->link_xmit_data_q, p_buf2);
+                GKI_freebuf (p_buf2);
+            }
+            else
+                p_buf = (BT_HDR *)GKI_getnext (p_buf);
+        }
+
+        /* Also flush our retransmission queue */
+        while (p_ccb->fcrb.retrans_q.p_first)
+            GKI_freebuf (GKI_dequeue (&p_ccb->fcrb.retrans_q));
+
+        p_buf = (BT_HDR *)p_ccb->fcrb.waiting_for_ack_q.p_first;
+    }
+
+    while (p_buf != NULL)
+    {
+        p_buf2 = l2c_fcr_clone_buf (p_buf, p_buf->offset, p_buf->len, p_ccb->ertm_info.fcr_tx_pool_id);
+
+        if (p_buf2)
+        {
+            p_buf2->layer_specific = p_buf->layer_specific;
+
+            GKI_enqueue (&p_ccb->fcrb.retrans_q, p_buf2);
+        }
+
+        if ( (tx_seq != L2C_FCR_RETX_ALL_PKTS) || (p_buf2 == NULL) )
+            break;
+        else
+            p_buf = (BT_HDR *)GKI_getnext (p_buf);
+    }
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+
+    if (p_ccb->fcrb.waiting_for_ack_q.count)
+    {
+        p_ccb->fcrb.num_tries++;
+        l2c_fcr_start_timer (p_ccb);
+    }
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_get_next_xmit_sdu_seg
+**
+** Description      Get the next SDU segment to transmit.
+**
+** Returns          pointer to buffer with segment or NULL
+**
+*******************************************************************************/
+BT_HDR *l2c_fcr_get_next_xmit_sdu_seg (tL2C_CCB *p_ccb, UINT16 max_packet_length)
+{
+    BOOLEAN     first_seg    = FALSE,       /* The segment is the first part of data  */
+                mid_seg      = FALSE,       /* The segment is the middle part of data */
+                last_seg     = FALSE;       /* The segment is the last part of data   */
+    UINT16      sdu_len;
+    BT_HDR      *p_buf, *p_xmit;
+    UINT8       *p;
+    UINT16      max_pdu = p_ccb->tx_mps /* Needed? - L2CAP_MAX_HEADER_FCS*/;
+
+    /* If there is anything in the retransmit queue, that goes first
+    */
+    if (p_ccb->fcrb.retrans_q.p_first)
+    {
+        p_buf = (BT_HDR *)GKI_dequeue (&p_ccb->fcrb.retrans_q);
+
+        /* Update Rx Seq and FCS if we acked some packets while this one was queued */
+        prepare_I_frame (p_ccb, p_buf, TRUE);
+
+        p_buf->event = p_ccb->local_cid;
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+        /* Use sdu_len to hold the control word */
+        p = ((UINT8 *) (p_buf+1)) + p_buf->offset + L2CAP_PKT_OVERHEAD;
+        STREAM_TO_UINT16 (sdu_len, p);
+
+        /* Get out if packet was dropped; just pretend it went out */
+        if (l2c_corrupt_the_fcr_packet (p_ccb, p_buf, FALSE, sdu_len))
+            return (NULL);
+#endif  /* L2CAP_CORRUPT_ERTM_PKTS */
+
+#if (L2CAP_ERTM_STATS == TRUE)
+        p_ccb->fcrb.pkts_retransmitted++;
+        p_ccb->fcrb.ertm_pkt_counts[0]++;
+        p_ccb->fcrb.ertm_byte_counts[0] += (p_buf->len - 8);
+#endif
+        return (p_buf);
+    }
+
+    /* For BD/EDR controller, max_packet_length is set to 0             */
+    /* For AMP controller, max_packet_length is set by available blocks */
+    if ( (max_packet_length > L2CAP_MAX_HEADER_FCS)
+      && (max_pdu + L2CAP_MAX_HEADER_FCS > max_packet_length) )
+    {
+        max_pdu = max_packet_length - L2CAP_MAX_HEADER_FCS;
+    }
+
+    p_buf = (BT_HDR *)p_ccb->xmit_hold_q.p_first;
+
+    /* If there is more data than the MPS, it requires segmentation */
+    if (p_buf->len > max_pdu)
+    {
+        /* We are using the "event" field to tell is if we already started segmentation */
+        if (p_buf->event == 0)
+        {
+            first_seg = TRUE;
+            sdu_len   = p_buf->len;
+        }
+        else
+            mid_seg = TRUE;
+
+        /* Get a new buffer and copy the data that can be sent in a PDU */
+        p_xmit = l2c_fcr_clone_buf (p_buf, L2CAP_MIN_OFFSET + L2CAP_SDU_LEN_OFFSET,
+                                    max_pdu, p_ccb->ertm_info.fcr_tx_pool_id);
+
+        if (p_xmit != NULL)
+        {
+            p_buf->event  = p_ccb->local_cid;
+            p_xmit->event = p_ccb->local_cid;
+
+            p_buf->len    -= max_pdu;
+            p_buf->offset += max_pdu;
+
+            /* copy PBF setting */
+            p_xmit->layer_specific = p_buf->layer_specific;
+        }
+        else /* Should never happen if the application has configured buffers correctly */
+        {
+            L2CAP_TRACE_ERROR1 ("L2CAP - cannot get buffer, for segmentation, pool: %u", p_ccb->ertm_info.fcr_tx_pool_id);
+            return (NULL);
+        }
+    }
+    else    /* Use the original buffer if no segmentation, or the last segment */
+    {
+        p_xmit = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_hold_q);
+
+        if (p_xmit->event != 0)
+            last_seg = TRUE;
+
+        p_xmit->event = p_ccb->local_cid;
+    }
+
+    /* Step back to add the L2CAP headers */
+    p_xmit->offset -= (L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD);
+    p_xmit->len    += L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD;
+
+    if (first_seg)
+    {
+        p_xmit->offset -= L2CAP_SDU_LEN_OVERHEAD;
+        p_xmit->len    += L2CAP_SDU_LEN_OVERHEAD;
+    }
+
+    /* Set the pointer to the beginning of the data */
+    p = (UINT8 *)(p_xmit + 1) + p_xmit->offset;
+
+    /* Now the L2CAP header */
+
+    /* Note: if FCS has to be included then the length is recalculated later */
+    UINT16_TO_STREAM (p, p_xmit->len - L2CAP_PKT_OVERHEAD);
+
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+
+    if (first_seg)
+    {
+        /* Skip control word and add SDU length */
+        p += 2;
+        UINT16_TO_STREAM (p, sdu_len);
+
+        /* We will store the SAR type in layer-specific */
+        /* layer_specific is shared with flushable flag(bits 0-1), don't clear it */
+        p_xmit->layer_specific |= L2CAP_FCR_START_SDU;
+
+        first_seg = FALSE;
+    }
+    else if (mid_seg)
+        p_xmit->layer_specific |= L2CAP_FCR_CONT_SDU;
+    else if (last_seg)
+        p_xmit->layer_specific |= L2CAP_FCR_END_SDU;
+    else
+        p_xmit->layer_specific |= L2CAP_FCR_UNSEG_SDU;
+
+    prepare_I_frame (p_ccb, p_xmit, FALSE);
+
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+    {
+        BT_HDR *p_wack = l2c_fcr_clone_buf (p_xmit, HCI_DATA_PREAMBLE_SIZE, p_xmit->len, p_ccb->ertm_info.fcr_tx_pool_id);
+
+        if (!p_wack)
+        {
+            L2CAP_TRACE_ERROR3 ("L2CAP - no buffer for xmit cloning, CID: 0x%04x  Pool: %u  Count: %u",
+                                p_ccb->local_cid, p_ccb->ertm_info.fcr_tx_pool_id,  GKI_poolfreecount(p_ccb->ertm_info.fcr_tx_pool_id));
+
+            /* We will not save the FCS in case we reconfigure and change options */
+            if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+                p_xmit->len -= L2CAP_FCS_LEN;
+
+            /* Pretend we sent it and it got lost */
+            GKI_enqueue (&p_ccb->fcrb.waiting_for_ack_q, p_xmit);
+            return (NULL);
+        }
+        else
+        {
+#if (L2CAP_ERTM_STATS == TRUE)
+            /* set timestamp at the end of tx I-frame to get acking delay */
+            p = ((UINT8 *) (p_wack+1)) + p_wack->offset + p_wack->len;
+            UINT32_TO_STREAM (p, GKI_get_os_tick_count());
+#endif
+            /* We will not save the FCS in case we reconfigure and change options */
+            if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+                p_wack->len -= L2CAP_FCS_LEN;
+
+            p_wack->layer_specific = p_xmit->layer_specific;
+            GKI_enqueue (&p_ccb->fcrb.waiting_for_ack_q, p_wack);
+        }
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+        {
+            UINT16 ctrl_word;
+            p = ((UINT8 *) (p_xmit+1)) + p_xmit->offset + L2CAP_PKT_OVERHEAD;
+            STREAM_TO_UINT16 (ctrl_word, p);
+
+            /* Get out if packet was dropped; pretend it was sent */
+            if (l2c_corrupt_the_fcr_packet (p_ccb, p_xmit, FALSE, ctrl_word))
+                return (NULL);
+        }
+#endif
+#if (L2CAP_ERTM_STATS == TRUE)
+        p_ccb->fcrb.ertm_pkt_counts[0]++;
+        p_ccb->fcrb.ertm_byte_counts[0] += (p_xmit->len - 8);
+#endif
+
+    }
+
+    return (p_xmit);
+}
+
+
+/*******************************************************************************
+** Configuration negotiation functions
+**
+** The following functions are used in negotiating channel modes during
+** configuration
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_chk_chan_modes
+**
+** Description      Validates and adjusts if necessary, the FCR options
+**                  based on remote EXT features.
+**
+**                  Note: This assumes peer EXT Features have been received.
+**                      Basic mode is used if FCR Options have not been received
+**
+** Returns          UINT8 - nonzero if can continue, '0' if no compatible channels
+**
+*******************************************************************************/
+UINT8 l2c_fcr_chk_chan_modes (tL2C_CCB *p_ccb)
+{
+    /* Remove nonbasic options that the peer does not support */
+    if (!(p_ccb->p_lcb->peer_ext_fea & L2CAP_EXTFEA_ENH_RETRANS))
+        p_ccb->ertm_info.allowed_modes &= ~L2CAP_FCR_CHAN_OPT_ERTM;
+
+    if (!(p_ccb->p_lcb->peer_ext_fea & L2CAP_EXTFEA_STREAM_MODE))
+        p_ccb->ertm_info.allowed_modes &= ~L2CAP_FCR_CHAN_OPT_STREAM;
+
+    /* At least one type needs to be set (Basic, ERTM, STM) to continue */
+    if (!p_ccb->ertm_info.allowed_modes)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - Peer does not support our desired channel types");
+    }
+
+    return (p_ccb->ertm_info.allowed_modes);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_adj_our_req_options
+**
+** Description      Validates and sets up the FCR options passed in from
+**                  L2CA_ConfigReq based on remote device's features.
+**
+** Returns          TRUE if no errors, Otherwise FALSE
+**
+*******************************************************************************/
+BOOLEAN l2c_fcr_adj_our_req_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    tL2CAP_FCR_OPTS *p_fcr = &p_cfg->fcr;
+
+    if (p_fcr->mode != p_ccb->ertm_info.preferred_mode)
+    {
+        L2CAP_TRACE_WARNING2 ("l2c_fcr_adj_our_req_options - preferred_mode (%d), does not match mode (%d)",
+                            p_ccb->ertm_info.preferred_mode, p_fcr->mode);
+
+        /* The preferred mode is passed in through tL2CAP_ERTM_INFO, so override this one */
+        p_fcr->mode = p_ccb->ertm_info.preferred_mode;
+    }
+
+    /* If upper layer did not request eRTM mode, BASIC must be used */
+    if (p_ccb->ertm_info.allowed_modes == L2CAP_FCR_CHAN_OPT_BASIC)
+    {
+        if (p_cfg->fcr_present && p_fcr->mode != L2CAP_FCR_BASIC_MODE)
+        {
+            L2CAP_TRACE_WARNING1 ("l2c_fcr_adj_our_req_options (mode %d): ERROR: No FCR options set using BASIC mode", p_fcr->mode);
+        }
+        p_fcr->mode = L2CAP_FCR_BASIC_MODE;
+    }
+
+    /* Process the FCR options if initial channel bring-up (not a reconfig request)
+    ** Determine initial channel mode to try based on our options and remote's features
+    */
+    if (p_cfg->fcr_present && !(p_ccb->config_done & RECONFIG_FLAG))
+    {
+        /* We need to have at least one mode type common with the peer */
+        if (!l2c_fcr_chk_chan_modes(p_ccb))
+        {
+            /* Two channels have incompatible supported types */
+            l2cu_disconnect_chnl (p_ccb);
+            return (FALSE);
+        }
+
+        /* Basic is the only common channel mode between the two devices */
+        else if (p_ccb->ertm_info.allowed_modes == L2CAP_FCR_CHAN_OPT_BASIC)
+        {
+            /* We only want to try Basic, so bypass sending the FCR options entirely */
+            p_cfg->fcr_present = FALSE;
+            p_cfg->fcs_present = FALSE;             /* Illegal to use FCS option in basic mode */
+            p_cfg->ext_flow_spec_present = FALSE;   /* Illegal to use extended flow spec in basic mode */
+        }
+
+        /* We have at least one non-basic mode available
+         * Override mode from available mode options based on preference, if needed
+         */
+        else
+        {
+            /* If peer does not support STREAMING, try ERTM */
+            if (p_fcr->mode == L2CAP_FCR_STREAM_MODE && !(p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_STREAM))
+            {
+                L2CAP_TRACE_DEBUG0 ("L2C CFG: mode is STREAM, but peer does not support; Try ERTM");
+                p_fcr->mode = L2CAP_FCR_ERTM_MODE;
+            }
+
+            /* If peer does not support ERTM, try BASIC (will support this if made it here in the code) */
+            if (p_fcr->mode == L2CAP_FCR_ERTM_MODE && !(p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_ERTM))
+            {
+                L2CAP_TRACE_DEBUG0 ("L2C CFG: mode is ERTM, but peer does not support; Try BASIC");
+                p_fcr->mode = L2CAP_FCR_BASIC_MODE;
+            }
+        }
+
+        if (p_fcr->mode != L2CAP_FCR_BASIC_MODE)
+        {
+            /* MTU must be smaller than buffer size */
+            if ( (p_cfg->mtu_present) && (p_cfg->mtu > p_ccb->max_rx_mtu) )
+            {
+                L2CAP_TRACE_WARNING2 ("L2CAP - MTU: %u  larger than buf size: %u", p_cfg->mtu, p_ccb->max_rx_mtu);
+                return (FALSE);
+            }
+
+            /* application want to use the default MPS */
+            if (p_fcr->mps == L2CAP_DEFAULT_ERM_MPS)
+            {
+                p_fcr->mps = L2CAP_MPS_OVER_BR_EDR;
+            }
+            /* MPS must be less than MTU */
+            else if (p_fcr->mps > p_ccb->max_rx_mtu)
+            {
+                L2CAP_TRACE_WARNING2 ("L2CAP - MPS  %u  invalid  MTU: %u", p_fcr->mps, p_ccb->max_rx_mtu);
+                return (FALSE);
+            }
+
+            /* We always initially read into the HCI buffer pool, so make sure it fits */
+            if (p_fcr->mps > (L2CAP_MTU_SIZE - L2CAP_MAX_HEADER_FCS))
+                p_fcr->mps = L2CAP_MTU_SIZE - L2CAP_MAX_HEADER_FCS;
+        }
+        else
+        {
+            p_cfg->fcs_present = FALSE;             /* Illegal to use FCS option in basic mode */
+            p_cfg->ext_flow_spec_present = FALSE;   /* Illegal to use extended flow spec in basic mode */
+        }
+
+        p_ccb->our_cfg.fcr = *p_fcr;
+    }
+    else    /* Not sure how to send a reconfiguration(??) should fcr be included? */
+    {
+        p_ccb->our_cfg.fcr_present = FALSE;
+    }
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_adj_monitor_retran_timeout
+**
+** Description      Overrides monitor/retrans timer value based on controller
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2c_fcr_adj_monitor_retran_timeout (tL2C_CCB *p_ccb)
+{
+    /* adjust our monitor/retran timeout */
+    if (p_ccb->out_cfg_fcr_present)
+    {
+        /*
+        ** if we requestd ERTM or accepted ERTM
+        ** We may accept ERTM even if we didn't request ERTM, in case of requesting STREAM
+        */
+        if ((p_ccb->our_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE)
+          ||(p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE))
+        {
+            /* upper layer setting is ignored */
+            p_ccb->our_cfg.fcr.mon_tout    = L2CAP_MIN_MONITOR_TOUT;
+            p_ccb->our_cfg.fcr.rtrans_tout = L2CAP_MIN_RETRANS_TOUT;
+        }
+        else
+        {
+            p_ccb->our_cfg.fcr.mon_tout    = 0;
+            p_ccb->our_cfg.fcr.rtrans_tout = 0;
+        }
+
+        L2CAP_TRACE_DEBUG2 ("l2c_fcr_adj_monitor_retran_timeout: mon_tout:%d, rtrans_tout:%d",
+                             p_ccb->our_cfg.fcr.mon_tout, p_ccb->our_cfg.fcr.rtrans_tout);
+    }
+}
+/*******************************************************************************
+**
+** Function         l2c_fcr_adj_our_rsp_options
+**
+** Description      Overrides any neccesary FCR options passed in from
+**                  L2CA_ConfigRsp based on our FCR options.
+**                  Only makes adjustments if channel is in ERTM mode.
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2c_fcr_adj_our_rsp_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* adjust our monitor/retran timeout */
+    l2c_fcr_adj_monitor_retran_timeout(p_ccb);
+
+    p_cfg->fcr_present = p_ccb->out_cfg_fcr_present;
+
+    if (p_cfg->fcr_present)
+    {
+// btla-specific ++
+        /* Temporary - until a better algorithm is implemented */
+        /* If peer's tx_wnd_sz requires too many buffers for us to support, then adjust it. For now, respond with our own tx_wnd_sz. */
+        /* Note: peer is not guaranteed to obey our adjustment */
+        if (p_ccb->peer_cfg.fcr.tx_win_sz > p_ccb->our_cfg.fcr.tx_win_sz)
+        {
+            L2CAP_TRACE_DEBUG3 ("%s: adjusting requested tx_win_sz from %i to %i", __FUNCTION__, p_ccb->peer_cfg.fcr.tx_win_sz, p_ccb->our_cfg.fcr.tx_win_sz);
+            p_ccb->peer_cfg.fcr.tx_win_sz = p_ccb->our_cfg.fcr.tx_win_sz;
+        }
+// btla-specific --
+
+        p_cfg->fcr.mode         = p_ccb->peer_cfg.fcr.mode;
+        p_cfg->fcr.tx_win_sz    = p_ccb->peer_cfg.fcr.tx_win_sz;
+        p_cfg->fcr.max_transmit = p_ccb->peer_cfg.fcr.max_transmit;
+        p_cfg->fcr.mps          = p_ccb->peer_cfg.fcr.mps;
+        p_cfg->fcr.rtrans_tout  = p_ccb->our_cfg.fcr.rtrans_tout;
+        p_cfg->fcr.mon_tout     = p_ccb->our_cfg.fcr.mon_tout;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_renegotiate_chan
+**
+** Description      Called upon unsuccessful peer response to config request.
+**                  If the error is because of the channel mode, it will try
+**                  to resend using another supported optional channel.
+**
+** Returns          TRUE if resent configuration, False if channel matches or
+**                  cannot match.
+**
+*******************************************************************************/
+BOOLEAN l2c_fcr_renegotiate_chan(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    UINT8   peer_mode = p_ccb->our_cfg.fcr.mode;
+    BOOLEAN can_renegotiate;
+
+    /* Skip if this is a reconfiguration from OPEN STATE or if FCR is not returned */
+    if (!p_cfg->fcr_present || (p_ccb->config_done & RECONFIG_FLAG))
+        return (FALSE);
+
+    /* Only retry if there are more channel options to try */
+    if (p_cfg->result == L2CAP_CFG_UNACCEPTABLE_PARAMS)
+    {
+        peer_mode = (p_cfg->fcr_present) ? p_cfg->fcr.mode : L2CAP_FCR_BASIC_MODE;
+
+        if (p_ccb->our_cfg.fcr.mode != peer_mode)
+        {
+
+            if ((--p_ccb->fcr_cfg_tries) == 0)
+            {
+                p_cfg->result = L2CAP_CFG_FAILED_NO_REASON;
+                L2CAP_TRACE_WARNING0 ("l2c_fcr_renegotiate_chan (Max retries exceeded)");
+            }
+
+            can_renegotiate = FALSE;
+
+            /* Try another supported mode if available based on our last attempted channel */
+            switch (p_ccb->our_cfg.fcr.mode)
+            {
+                /* Our Streaming mode request was unnacceptable; try ERTM or Basic */
+            case L2CAP_FCR_STREAM_MODE:
+                /* Peer wants ERTM and we support it */
+                if ( (peer_mode == L2CAP_FCR_ERTM_MODE) && (p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_ERTM) )
+                {
+                    L2CAP_TRACE_DEBUG0 ("l2c_fcr_renegotiate_chan(Trying ERTM)");
+                    p_ccb->our_cfg.fcr.mode = L2CAP_FCR_ERTM_MODE;
+                    can_renegotiate = TRUE;
+                }
+                else    /* Falls through */
+
+            case L2CAP_FCR_ERTM_MODE:
+                {
+                    /* We can try basic for any other peer mode if we support it */
+                    if (p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_BASIC)
+                    {
+                        L2CAP_TRACE_DEBUG0 ("l2c_fcr_renegotiate_chan(Trying Basic)");
+                        can_renegotiate = TRUE;
+                        p_ccb->our_cfg.fcr.mode = L2CAP_FCR_BASIC_MODE;
+                    }
+                }
+                break;
+
+            default:
+                /* All other scenarios cannot be renegotiated */
+                break;
+            }
+
+            if (can_renegotiate)
+            {
+                p_ccb->our_cfg.fcr_present = TRUE;
+
+                if (p_ccb->our_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE)
+                {
+                    p_ccb->our_cfg.fcs_present = FALSE;
+                    p_ccb->our_cfg.ext_flow_spec_present = FALSE;
+
+                    /* Basic Mode uses ACL Data Pool, make sure the MTU fits */
+                    if ( (p_cfg->mtu_present) && (p_cfg->mtu > L2CAP_MTU_SIZE) )
+                    {
+                        L2CAP_TRACE_WARNING1 ("L2CAP - adjust MTU: %u too large", p_cfg->mtu);
+                        p_cfg->mtu = L2CAP_MTU_SIZE;
+                    }
+                }
+
+                l2cu_process_our_cfg_req (p_ccb, &p_ccb->our_cfg);
+                l2cu_send_peer_config_req (p_ccb, &p_ccb->our_cfg);
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_CHNL_CFG_TIMEOUT);
+                return (TRUE);
+            }
+        }
+    }
+
+    /* Disconnect if the channels do not match */
+    if (p_ccb->our_cfg.fcr.mode != peer_mode)
+    {
+        L2CAP_TRACE_WARNING2 ("L2C CFG:  Channels incompatible (local %d, peer %d)",
+                              p_ccb->our_cfg.fcr.mode, peer_mode);
+        l2cu_disconnect_chnl (p_ccb);
+    }
+
+    return (FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_fcr_process_peer_cfg_req
+**
+** Description      This function is called to process the FCR options passed
+**                  in the peer's configuration request.
+**
+** Returns          UINT8 - L2CAP_PEER_CFG_OK, L2CAP_PEER_CFG_UNACCEPTABLE,
+**                          or L2CAP_PEER_CFG_DISCONNECT.
+**
+*******************************************************************************/
+UINT8 l2c_fcr_process_peer_cfg_req(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    UINT16 max_retrans_size;
+    UINT8  fcr_ok = L2CAP_PEER_CFG_OK;
+
+    p_ccb->p_lcb->w4_info_rsp = FALSE;      /* Handles T61x SonyEricsson Bug in Info Request */
+
+    L2CAP_TRACE_EVENT5 ("l2c_fcr_process_peer_cfg_req() CFG fcr_present:%d fcr.mode:%d CCB FCR mode:%d preferred: %u allowed:%u",
+                        p_cfg->fcr_present, p_cfg->fcr.mode, p_ccb->our_cfg.fcr.mode, p_ccb->ertm_info.preferred_mode,
+                        p_ccb->ertm_info.allowed_modes);
+
+    /* If Peer wants basic, we are done (accept it or disconnect) */
+    if (p_cfg->fcr.mode == L2CAP_FCR_BASIC_MODE)
+    {
+        /* If we do not allow basic, disconnect */
+        if ( !(p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_BASIC) )
+            fcr_ok = L2CAP_PEER_CFG_DISCONNECT;
+    }
+
+    /* Need to negotiate if our modes are not the same */
+    else if (p_cfg->fcr.mode != p_ccb->ertm_info.preferred_mode)
+    {
+        /* If peer wants a mode that we don't support then retry our mode (ex. rtx/flc), OR
+        ** If we want ERTM and they wanted streaming retry our mode.
+        ** Note: If we have already determined they support our mode previously
+        **       from their EXF mask.
+        */
+        if ( (((1 << p_cfg->fcr.mode) & L2CAP_FCR_CHAN_OPT_ALL_MASK) == 0)
+            || (p_ccb->ertm_info.preferred_mode == L2CAP_FCR_ERTM_MODE) )
+        {
+            p_cfg->fcr.mode = p_ccb->our_cfg.fcr.mode;
+            p_cfg->fcr.tx_win_sz = p_ccb->our_cfg.fcr.tx_win_sz;
+            p_cfg->fcr.max_transmit = p_ccb->our_cfg.fcr.max_transmit;
+            fcr_ok = L2CAP_PEER_CFG_UNACCEPTABLE;
+        }
+
+        /* If we wanted basic, then try to renegotiate it */
+        else if (p_ccb->ertm_info.preferred_mode == L2CAP_FCR_BASIC_MODE)
+        {
+            p_cfg->fcr.mode = L2CAP_FCR_BASIC_MODE;
+            p_cfg->fcr.max_transmit = p_cfg->fcr.tx_win_sz = 0;
+            p_cfg->fcr.rtrans_tout = p_cfg->fcr.mon_tout = p_cfg->fcr.mps = 0;
+            p_ccb->our_cfg.fcr.rtrans_tout = p_ccb->our_cfg.fcr.mon_tout = p_ccb->our_cfg.fcr.mps = 0;
+            fcr_ok = L2CAP_PEER_CFG_UNACCEPTABLE;
+        }
+
+        /* Only other valid case is if they want ERTM and we wanted STM which should be
+           accepted if we support it; otherwise the channel should be disconnected */
+        else if ( (p_cfg->fcr.mode != L2CAP_FCR_ERTM_MODE)
+              || !(p_ccb->ertm_info.allowed_modes & L2CAP_FCR_CHAN_OPT_ERTM) )
+        {
+            fcr_ok = L2CAP_PEER_CFG_DISCONNECT;
+        }
+    }
+
+    /* Configuration for FCR channels so make any adjustments and fwd to upper layer */
+    if (fcr_ok == L2CAP_PEER_CFG_OK)
+    {
+        /* by default don't need to send params in the response */
+        p_ccb->out_cfg_fcr_present = FALSE;
+
+        /* Make any needed adjustments for the response to the peer */
+        if (p_cfg->fcr_present && p_cfg->fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            /* Peer desires to bypass FCS check, and streaming or ERTM mode */
+            if (p_cfg->fcs_present)
+            {
+                p_ccb->peer_cfg.fcs = p_cfg->fcs;
+                p_ccb->peer_cfg_bits |= L2CAP_CH_CFG_MASK_FCS;
+                if( p_cfg->fcs == L2CAP_CFG_FCS_BYPASS)
+                    p_ccb->bypass_fcs |= L2CAP_CFG_FCS_PEER;
+            }
+
+            max_retrans_size = GKI_get_pool_bufsize (p_ccb->ertm_info.fcr_tx_pool_id) - sizeof(BT_HDR)
+                                            - L2CAP_MIN_OFFSET - L2CAP_SDU_LEN_OFFSET - L2CAP_FCS_LEN;
+
+            /* Ensure the MPS is not bigger than the MTU */
+            if ( (p_cfg->fcr.mps == 0) || (p_cfg->fcr.mps > p_ccb->peer_cfg.mtu) )
+            {
+                p_cfg->fcr.mps = p_ccb->peer_cfg.mtu;
+                p_ccb->out_cfg_fcr_present = TRUE;
+            }
+
+            /* Ensure the MPS is not bigger than our retransmission buffer */
+            if (p_cfg->fcr.mps > max_retrans_size)
+            {
+                L2CAP_TRACE_DEBUG2("CFG: Overriding MPS to %d (orig %d)", max_retrans_size, p_cfg->fcr.mps);
+
+                p_cfg->fcr.mps = max_retrans_size;
+                p_ccb->out_cfg_fcr_present = TRUE;
+            }
+
+            if (p_cfg->fcr.mode == L2CAP_FCR_ERTM_MODE)
+            {
+                /* Always respond with FCR ERTM parameters */
+                p_ccb->out_cfg_fcr_present = TRUE;
+            }
+        }
+
+        /* Everything ok, so save the peer's adjusted fcr options */
+        p_ccb->peer_cfg.fcr = p_cfg->fcr;
+
+        if (p_cfg->fcr_present)
+            p_ccb->peer_cfg_bits |= L2CAP_CH_CFG_MASK_FCR;
+    }
+    else if (fcr_ok == L2CAP_PEER_CFG_UNACCEPTABLE)
+    {
+        /* Allow peer only one retry for mode */
+        if (p_ccb->peer_cfg_already_rejected)
+            fcr_ok = L2CAP_PEER_CFG_DISCONNECT;
+        else
+            p_ccb->peer_cfg_already_rejected = TRUE;
+    }
+
+    return (fcr_ok);
+}
+
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+/*******************************************************************************
+**  Functions used for testing ERTM mode
+*/
+/* If FALSE, will also corrupt cid, length, control word, etc. */
+#ifndef L2CAP_CORR_FCS_ONLY
+#define L2CAP_CORR_FCS_ONLY TRUE
+#endif
+
+#define L2C_DISP_FRAME_SIZE 16
+/*******************************************************************************
+**
+** Function         l2c_corrupt_the_fcr_packet
+**
+** Description      This function is used for testing purposes only.
+**                  It systematically or randomly corrupts packets used with
+**                  ERTM channels.
+**
+** Returns          BOOLEAN   TRUE if packet was dropped,
+**                            FALSE if fcs corrupted or no corruption
+**
+*******************************************************************************/
+static BOOLEAN l2c_corrupt_the_fcr_packet (tL2C_CCB *p_ccb, BT_HDR *p_buf,
+                                           BOOLEAN is_rx, UINT16 ctrl_word)
+{
+    tL2C_FCR_TEST_CFG *p_cfg;
+    UINT32   tc;
+    UINT8   *p;
+    UINT32   xx;
+    char     buf[L2C_DISP_FRAME_SIZE];
+
+    if (!p_ccb || !p_ccb->fcrb.test_cb.cfg.in_use)
+        return FALSE;
+
+    /* Prepare bad FCS */
+    p = ((UINT8 *) (p_buf + 1)) + p_buf->offset;
+    tc = GKI_get_os_tick_count();
+    tc ^= p[p_buf->len - 1];
+    xx = tc % 47;
+
+    p_cfg = &p_ccb->fcrb.test_cb.cfg;
+#if 0
+    L2CAP_TRACE_DEBUG4 ("testcfg: type: %d, freq: %d (NRM-0, RDM-1), is_rx: %d, count: %d",
+        p_cfg->type, p_cfg->freq, p_cfg->is_rx, p_cfg->count);
+#endif
+    /* If not time to corrupt get out */
+    if (p_cfg->freq == L2CAP_FCR_FREQ_RANDOM)
+    {
+        if (xx != 0)
+            return FALSE;
+    }
+    else    /* check test criteria before corrupting */
+    {
+        if ( (p_cfg->count == 0)
+          || (p_cfg->is_rx != is_rx)
+          || ((UINT8)(ctrl_word & L2CAP_FCR_S_FRAME_BIT) != p_cfg->type) )
+        {
+            return FALSE;
+        }
+
+        /* Turn off if done */
+        if (--(p_cfg->count) == 0)
+        {
+            p_ccb->fcrb.test_cb.cfg.in_use = FALSE;
+        }
+    }
+
+#if L2CAP_CORR_FCS_ONLY == TRUE
+    /* Corrupt the FCS check */
+    p[p_buf->len - 1] = p[p_buf->len - 2] = 0;
+#else
+    /* If made it this far packet needs to be corrupted */
+    xx = tc % p_buf->len;
+
+    /* Make sure the value was changed */
+    if (p[xx + 1] == 0)
+        p[xx + 1] = 0x5A;
+
+    p[xx] = p[xx] ^ p[xx + 1];
+
+#if 1   /* Enable if not wishing to corrupting frame type */
+    {
+        UINT8 *p_temp = ((UINT8 *) (p_buf + 1)) + p_buf->offset;
+        p_temp += L2CAP_PKT_OVERHEAD;
+        if ((UINT16)((*p_temp) & 0x01) != (ctrl_word & 0x0001))
+        {
+            (*p_temp) |= (UINT8)(ctrl_word & 0x0001);
+        }
+    }
+#endif
+#endif
+
+    if (is_rx)
+    {
+        if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+            BCM_STRCPY_S(buf, L2C_DISP_FRAME_SIZE, "Rx S-Frame");
+        else
+            BCM_STRCPY_S(buf, L2C_DISP_FRAME_SIZE, "Rx I-Frame");
+    }
+    else
+    {
+        if (ctrl_word & L2CAP_FCR_S_FRAME_BIT)
+            BCM_STRCPY_S(buf, L2C_DISP_FRAME_SIZE, "Tx S-Frame");
+        else
+            BCM_STRCPY_S(buf, L2C_DISP_FRAME_SIZE, "Tx I-Frame");
+    }
+
+    /* Lastly, just drop packet if FCS is not being used or if Tx */
+    if (!is_rx || p_ccb->bypass_fcs == L2CAP_BYPASS_FCS)
+    {
+        L2CAP_TRACE_ERROR6 ("-=-=-=-=-=-=-=-   Dropping %s packet (0x%04x) tc: %u  Buf Len: %u  xx: %u  count: %d",
+                        buf, (UINT32)p_buf, tc, p_buf->len, xx, p_cfg->count);
+        GKI_freebuf(p_buf);
+        return TRUE;
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR6 ("-=-=-=-=-=-=-=-   Corrupting %s packet (0x%04x) tc: %u  Buf Len: %u  xx: %u  count: %d",
+                        buf, (UINT32)p_buf, tc, p_buf->len, xx, p_cfg->count);
+    }
+
+    return FALSE;
+}
+
+
+/*******************************************************************************
+**
+** Function         L2CA_SetupErtmTest
+**
+** Description      This function is used for testing purposes only.
+**                  It corrupts or drops one or more packets used with ERTM channels.
+**
+** Parameters
+**                  cid - channel ID  (0 uses RFCOMM PSM's CID)
+**
+**                  type - type of test to run (L2CAP_FCR_TTYPE_CORR_IFRAMES
+**                                              L2CAP_FCR_TTYPE_CORR_SFRAME
+**                                              L2CAP_FCR_TTYPE_STOP_TEST
+**                                              L2CAP_FCR_TTYPE_GET_CID - returns rfcomm cid only)
+**
+**                  is_rx  - TRUE to corrupt Rx packet, FALSE for Tx packet)
+**
+**                  freq - L2CAP_FCR_FREQ_RANDOM    (turns on random corruptions/drops)
+**                         L2CAP_FCR_FREQ_NORMAL    (turns on test with "count" corruptions/drops)
+**
+**                  count - number of packets in a row to drop or corrupt
+**
+** Returns          CID of channel running test
+**
+*******************************************************************************/
+UINT16 L2CA_SetupErtmTest (UINT16 cid, UINT8 type, BOOLEAN is_rx, UINT8 freq, UINT16 count)
+{
+    tL2C_CCB *p_ccb = NULL;
+    tL2C_CCB *p_temp_ccb;
+    tL2C_FCR_TEST_CB *p_test_cb;
+    UINT16 xx;
+
+    /* If '0' tests run on top of RFCOMM CID if active */
+    if (cid == 0)
+    {
+        p_temp_ccb = l2cb.ccb_pool;
+        for (xx = 0; xx < MAX_L2CAP_CHANNELS; xx++, p_temp_ccb++)
+        {
+            /* Fixed channels don't have p_rcb's */
+            if (p_temp_ccb->in_use && p_temp_ccb->p_rcb && p_temp_ccb->p_rcb->psm == BT_PSM_RFCOMM)
+            {
+                p_ccb = p_temp_ccb;
+                cid = L2CAP_BASE_APPL_CID + xx;
+                break;
+            }
+        }
+    }
+    else
+        p_ccb = l2cu_find_ccb_by_cid (NULL, cid);
+
+    if (!p_ccb || type == L2CAP_FCR_TTYPE_GET_CID)
+    {
+        if (type == L2CAP_FCR_TTYPE_GET_CID)
+        {
+            L2CAP_TRACE_API1 ("L2CA_SetupErtmTest (GET_CID): cid = 0x%04x", cid);
+        }
+        return (cid);
+    }
+
+    p_test_cb = &p_ccb->fcrb.test_cb;
+
+    /* Turn off the current test */
+    if (type == L2CAP_FCR_TTYPE_STOP_TEST)
+    {
+        if (p_test_cb->cfg.in_use)
+        {
+            L2CAP_TRACE_ERROR1 ("L2CA_SetupErtmTest (OFF): cid 0x%04x", cid);
+        }
+        p_test_cb->cfg.in_use = FALSE;
+        p_test_cb->cfg.count = 0;
+    }
+
+    /* Process the new request */
+    else if (!p_test_cb->cfg.in_use)
+    {
+        /* count must be positive unless random is used */
+        if (!count && freq != L2CAP_FCR_FREQ_RANDOM)
+        {
+            L2CAP_TRACE_ERROR1 ("L2CA_SetupErtmTest (FAIL): Count = 0, freq = %d", freq);
+            return (cid);
+        }
+
+        L2CAP_TRACE_ERROR5 ("L2CA_SetupErtmTest (START): cid 0x%04x, type %d, is_rx %d, freq %d, count %d",
+                            cid, type, is_rx, freq, count);
+
+        p_test_cb->cfg.in_use = TRUE;
+        p_test_cb->cfg.freq = freq;
+        p_test_cb->cfg.type = type;
+        p_test_cb->cfg.is_rx = is_rx;
+        p_test_cb->cfg.count = count;
+    }
+    else /* Test already in progress so ignore */
+    {
+        L2CAP_TRACE_ERROR5 ("L2CA_SetupErtmTest (ignoring): cid 0x%04x, type %d, is_rx %d, freq %d, count %d",
+                            cid, type, is_rx, freq, count);
+    }
+
+    return (cid);
+}
+
+
+/*******************************************************************************
+** The following routines are only used in conjunction with Conformance testing
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         L2CA_SendPolledSFrame
+**
+** Description      This function is used for testing purposes only.
+**                  It Sends a Polled RR or RNR to the peer
+**
+** Parameters
+**                  cid - channel ID
+**
+**                  sup_type - (L2CAP_FCR_SUP_RR or L2CAP_FCR_SUP_RNR)
+**
+** Returns          void
+**
+*******************************************************************************/
+void L2CA_SendPolledSFrame (UINT16 cid, UINT16 sup_type)
+{
+    tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid (NULL, cid);
+
+    if (p_ccb && (sup_type == L2CAP_FCR_SUP_RR || sup_type == L2CAP_FCR_SUP_RNR))
+    {
+        l2c_fcr_send_S_frame (p_ccb, sup_type, L2CAP_FCR_P_BIT);
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR2 ("L2CA_SendPolledSFrame(ERROR): sup_type %u, p_ccb 0x%07x",
+                            sup_type, (UINT32)p_ccb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_bypass_sframe_packet
+**
+** Description      This function is used for testing purposes only.
+**                  It returns TRUE if S-Frame should be bypassed.
+**
+** Returns          void
+**
+*******************************************************************************/
+static BOOLEAN l2c_bypass_sframe_packet (tL2C_CCB *p_ccb)
+{
+    if (p_ccb && p_ccb->fcrb.test_cb.cfm.in_use)
+    {
+        if (p_ccb->fcrb.test_cb.cfm.skip_sframe_count > 0)
+        {
+            L2CAP_TRACE_ERROR1 ("l2c_bypass_sframe_packet (count %d)",
+                                p_ccb->fcrb.test_cb.cfm.skip_sframe_count);
+
+            if (--p_ccb->fcrb.test_cb.cfm.skip_sframe_count == 0)
+                p_ccb->fcrb.test_cb.cfm.in_use = FALSE;
+
+            /* Bypass sending S-Frame */
+            return TRUE;
+        }
+        else
+            p_ccb->fcrb.test_cb.cfm.in_use = FALSE;
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_BypassSFrame
+**
+** Description      This function is used for testing purposes only.
+**                  It skips sending 'count' S-Frames.
+**
+** Parameters
+**                  cid - channel ID
+**
+**                  count - Number of S-Frames to skip sending
+**
+** Returns          void
+**
+*******************************************************************************/
+void L2CA_BypassSFrame (UINT16 cid, UINT8 count)
+{
+    tL2C_CCB *p_ccb = l2cu_find_ccb_by_cid (NULL, cid);
+    tL2C_FCR_CFM_TEST_CB *p_test_cb;
+
+    if (!p_ccb)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CA_BypassSFrame(ERROR): no p_ccb (0x%07x)", (UINT32)p_ccb);
+        return;
+    }
+
+    p_test_cb = &p_ccb->fcrb.test_cb.cfm;
+
+    /* Initiate test if not active */
+    if (!p_test_cb->in_use)
+    {
+        p_test_cb->in_use = TRUE;
+        p_test_cb->skip_sframe_count = count;
+    }
+    else
+    {
+        L2CAP_TRACE_WARNING0 ("L2CA_BypassSFrame(ERROR): already in use (ignoring...)");
+    }
+}
+
+#endif  /* L2CAP_CORRUPT_ERTM_PKTS == TRUE */
+
+#if (L2CAP_ERTM_STATS == TRUE)
+/*******************************************************************************
+**
+** Function         l2c_fcr_collect_ack_delay
+**
+** Description      collect throughput, delay, queue size of waiting ack
+**
+** Parameters
+**                  tL2C_CCB
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_fcr_collect_ack_delay (tL2C_CCB *p_ccb, UINT8 num_bufs_acked)
+{
+    UINT32  index;
+    BT_HDR *p_buf;
+    UINT8  *p;
+    UINT32  timestamp, delay;
+    UINT8   xx;
+    UINT8   str[120];
+
+    index = p_ccb->fcrb.ack_delay_avg_index;
+
+    /* update sum, max and min of waiting for ack queue size */
+    p_ccb->fcrb.ack_q_count_avg[index] += p_ccb->fcrb.waiting_for_ack_q.count;
+
+    if ( p_ccb->fcrb.waiting_for_ack_q.count > p_ccb->fcrb.ack_q_count_max[index] )
+        p_ccb->fcrb.ack_q_count_max[index] = p_ccb->fcrb.waiting_for_ack_q.count;
+
+    if ( p_ccb->fcrb.waiting_for_ack_q.count < p_ccb->fcrb.ack_q_count_min[index] )
+        p_ccb->fcrb.ack_q_count_min[index] = p_ccb->fcrb.waiting_for_ack_q.count;
+
+    /* update sum, max and min of round trip delay of acking */
+    p_buf = (BT_HDR *)(p_ccb->fcrb.waiting_for_ack_q.p_first);
+    for (xx = 0; (xx < num_bufs_acked)&&(p_buf); xx++)
+    {
+        /* adding up length of acked I-frames to get throughput */
+        p_ccb->fcrb.throughput[index] += p_buf->len - 8;
+
+        if ( xx == num_bufs_acked - 1 )
+        {
+            /* get timestamp from tx I-frame that receiver is acking */
+            p = ((UINT8 *) (p_buf+1)) + p_buf->offset + p_buf->len;
+            if (p_ccb->bypass_fcs != L2CAP_BYPASS_FCS)
+            {
+                p += L2CAP_FCS_LEN;
+            }
+
+            STREAM_TO_UINT32 (timestamp, p);
+            delay = GKI_get_os_tick_count() - timestamp;
+
+            p_ccb->fcrb.ack_delay_avg[index] += delay;
+            if ( delay > p_ccb->fcrb.ack_delay_max[index] )
+                p_ccb->fcrb.ack_delay_max[index] = delay;
+            if ( delay < p_ccb->fcrb.ack_delay_min[index] )
+                p_ccb->fcrb.ack_delay_min[index] = delay;
+        }
+
+        p_buf = GKI_getnext(p_buf);
+    }
+
+    p_ccb->fcrb.ack_delay_avg_count++;
+
+    /* calculate average and initialize next avg, min and max */
+    if (p_ccb->fcrb.ack_delay_avg_count > L2CAP_ERTM_STATS_AVG_NUM_SAMPLES)
+    {
+        p_ccb->fcrb.ack_delay_avg_count = 0;
+
+        p_ccb->fcrb.ack_q_count_avg[index] /= L2CAP_ERTM_STATS_AVG_NUM_SAMPLES;
+        p_ccb->fcrb.ack_delay_avg[index] /= L2CAP_ERTM_STATS_AVG_NUM_SAMPLES;
+
+        /* calculate throughput */
+        timestamp = GKI_get_os_tick_count();
+        if (timestamp - p_ccb->fcrb.throughput_start > 0 )
+            p_ccb->fcrb.throughput[index] /= (timestamp - p_ccb->fcrb.throughput_start);
+
+        p_ccb->fcrb.throughput_start = timestamp;
+
+        sprintf(str, "[%02u] throughput: %5u, ack_delay avg:%3u, min:%3u, max:%3u, ack_q_count avg:%3u, min:%3u, max:%3u",
+                index, p_ccb->fcrb.throughput[index],
+                p_ccb->fcrb.ack_delay_avg[index], p_ccb->fcrb.ack_delay_min[index], p_ccb->fcrb.ack_delay_max[index],
+                p_ccb->fcrb.ack_q_count_avg[index], p_ccb->fcrb.ack_q_count_min[index], p_ccb->fcrb.ack_q_count_max[index] );
+
+        BT_TRACE_1(TRACE_CTRL_GENERAL | TRACE_LAYER_GKI | TRACE_ORG_GKI , TRACE_TYPE_GENERIC, "%s", str);
+
+        index = (index + 1) % L2CAP_ERTM_STATS_NUM_AVG;
+        p_ccb->fcrb.ack_delay_avg_index = index;
+
+        p_ccb->fcrb.ack_q_count_max[index] = 0;
+        p_ccb->fcrb.ack_q_count_min[index] = 0xFFFFFFFF;
+        p_ccb->fcrb.ack_q_count_avg[index] = 0;
+
+
+        p_ccb->fcrb.ack_delay_max[index] = 0;
+        p_ccb->fcrb.ack_delay_min[index] = 0xFFFFFFFF;
+        p_ccb->fcrb.ack_delay_avg[index] = 0;
+
+        p_ccb->fcrb.throughput[index] = 0;
+    }
+}
+#endif
+
+
+
diff --git a/stack/l2cap/l2c_int.h b/stack/l2cap/l2c_int.h
new file mode 100644
index 0000000..609c825
--- /dev/null
+++ b/stack/l2cap/l2c_int.h
@@ -0,0 +1,771 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains L2CAP internal definitions
+ *
+ ******************************************************************************/
+#ifndef L2C_INT_H
+#define L2C_INT_H
+
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "gki.h"
+#include "btm_api.h"
+
+#define L2CAP_MIN_MTU   48      /* Minimum acceptable MTU is 48 bytes */
+
+/* Timeouts. Since L2CAP works off a 1-second list, all are in seconds.
+*/
+#define L2CAP_LINK_ROLE_SWITCH_TOUT  10           /* 10 seconds */
+#define L2CAP_LINK_CONNECT_TOUT      60           /* 30 seconds */
+#define L2CAP_LINK_CONNECT_TOUT_EXT  120          /* 120 seconds */
+#define L2CAP_ECHO_RSP_TOUT          30           /* 30 seconds */
+#define L2CAP_LINK_FLOW_CONTROL_TOUT 2            /* 2  seconds */
+#define L2CAP_LINK_DISCONNECT_TOUT   30           /* 30 seconds */
+
+#ifndef L2CAP_CHNL_CONNECT_TOUT      /* BTIF needs to override for internal project needs */
+#define L2CAP_CHNL_CONNECT_TOUT      60           /* 60 seconds */
+#endif
+
+#define L2CAP_CHNL_CONNECT_TOUT_EXT  120          /* 120 seconds */
+#define L2CAP_CHNL_CFG_TIMEOUT       30           /* 30 seconds */
+#define L2CAP_CHNL_DISCONNECT_TOUT   10           /* 10 seconds */
+#define L2CAP_DELAY_CHECK_SM4        2            /* 2 seconds */
+#define L2CAP_WAIT_INFO_RSP_TOUT     3            /* 3 seconds */
+#define L2CAP_WAIT_UNPARK_TOUT       2            /* 2 seconds */
+#define L2CAP_LINK_INFO_RESP_TOUT    2            /* 2  seconds */
+#define L2CAP_BLE_LINK_CONNECT_TOUT  30           /* 30 seconds */
+
+/* quick timer uses millisecond unit */
+#define L2CAP_DEFAULT_RETRANS_TOUT   2000         /* 2000 milliseconds */
+#define L2CAP_DEFAULT_MONITOR_TOUT   12000        /* 12000 milliseconds */
+#define L2CAP_FCR_ACK_TOUT           200          /* 200 milliseconds */
+
+/* Define the possible L2CAP channel states. The names of
+** the states may seem a bit strange, but they are taken from
+** the Bluetooth specification.
+*/
+typedef enum
+{
+    CST_CLOSED,                           /* Channel is in clodes state           */
+    CST_ORIG_W4_SEC_COMP,                 /* Originator waits security clearence  */
+    CST_TERM_W4_SEC_COMP,                 /* Acceptor waits security clearence    */
+    CST_W4_L2CAP_CONNECT_RSP,             /* Waiting for peer conenct response    */
+    CST_W4_L2CA_CONNECT_RSP,              /* Waiting for upper layer connect rsp  */
+    CST_CONFIG,                           /* Negotiating configuration            */
+    CST_OPEN,                             /* Data transfer state                  */
+    CST_W4_L2CAP_DISCONNECT_RSP,          /* Waiting for peer disconnect rsp      */
+    CST_W4_L2CA_DISCONNECT_RSP            /* Waiting for upper layer disc rsp     */
+} tL2C_CHNL_STATE;
+
+/* Define the possible L2CAP link states
+*/
+typedef enum
+{
+    LST_DISCONNECTED,
+    LST_CONNECT_HOLDING,
+    LST_CONNECTING_WAIT_SWITCH,
+    LST_CONNECTING,
+    LST_CONNECTED,
+    LST_DISCONNECTING
+} tL2C_LINK_STATE;
+
+
+
+/* Define input events to the L2CAP link and channel state machines. The names
+** of the events may seem a bit strange, but they are taken from
+** the Bluetooth specification.
+*/
+#define L2CEVT_LP_CONNECT_CFM          0          /* Lower layer connect confirm          */
+#define L2CEVT_LP_CONNECT_CFM_NEG      1          /* Lower layer connect confirm (failed) */
+#define L2CEVT_LP_CONNECT_IND          2          /* Lower layer connect indication       */
+#define L2CEVT_LP_DISCONNECT_IND       3          /* Lower layer disconnect indication    */
+#define L2CEVT_LP_QOS_CFM              4          /* Lower layer QOS confirmation         */
+#define L2CEVT_LP_QOS_CFM_NEG          5          /* Lower layer QOS confirmation (failed)*/
+#define L2CEVT_LP_QOS_VIOLATION_IND    6          /* Lower layer QOS violation indication */
+
+#define L2CEVT_SEC_COMP                7          /* Security cleared successfully        */
+#define L2CEVT_SEC_COMP_NEG            8          /* Security procedure failed            */
+
+#define L2CEVT_L2CAP_CONNECT_REQ      10          /* Peer connection request              */
+#define L2CEVT_L2CAP_CONNECT_RSP      11          /* Peer connection response             */
+#define L2CEVT_L2CAP_CONNECT_RSP_PND  12          /* Peer connection response pending     */
+#define L2CEVT_L2CAP_CONNECT_RSP_NEG  13          /* Peer connection response (failed)    */
+#define L2CEVT_L2CAP_CONFIG_REQ       14          /* Peer configuration request           */
+#define L2CEVT_L2CAP_CONFIG_RSP       15          /* Peer configuration response          */
+#define L2CEVT_L2CAP_CONFIG_RSP_NEG   16          /* Peer configuration response (failed) */
+#define L2CEVT_L2CAP_DISCONNECT_REQ   17          /* Peer disconnect request              */
+#define L2CEVT_L2CAP_DISCONNECT_RSP   18          /* Peer disconnect response             */
+#define L2CEVT_L2CAP_INFO_RSP         19          /* Peer information response            */
+#define L2CEVT_L2CAP_DATA             20          /* Peer data                            */
+
+#define L2CEVT_L2CA_CONNECT_REQ       21          /* Upper layer connect request          */
+#define L2CEVT_L2CA_CONNECT_RSP       22          /* Upper layer connect response         */
+#define L2CEVT_L2CA_CONNECT_RSP_NEG   23          /* Upper layer connect response (failed)*/
+#define L2CEVT_L2CA_CONFIG_REQ        24          /* Upper layer config request           */
+#define L2CEVT_L2CA_CONFIG_RSP        25          /* Upper layer config response          */
+#define L2CEVT_L2CA_CONFIG_RSP_NEG    26          /* Upper layer config response (failed) */
+#define L2CEVT_L2CA_DISCONNECT_REQ    27          /* Upper layer disconnect request       */
+#define L2CEVT_L2CA_DISCONNECT_RSP    28          /* Upper layer disconnect response      */
+#define L2CEVT_L2CA_DATA_READ         29          /* Upper layer data read                */
+#define L2CEVT_L2CA_DATA_WRITE        30          /* Upper layer data write               */
+#define L2CEVT_L2CA_FLUSH_REQ         31          /* Upper layer flush                    */
+
+#define L2CEVT_TIMEOUT                32          /* Timeout                              */
+#define L2CEVT_SEC_RE_SEND_CMD        33          /* btm_sec has enough info to proceed   */
+
+#define L2CEVT_ACK_TIMEOUT            34          /* RR delay timeout                     */
+
+
+/* Bitmask to skip over Broadcom feature reserved (ID) to avoid sending two
+   successive ID values, '0' id only or both */
+#define L2CAP_ADJ_BRCM_ID           0x1
+#define L2CAP_ADJ_ZERO_ID           0x2
+#define L2CAP_ADJ_ID                0x3
+
+/* Return values for l2cu_process_peer_cfg_req() */
+#define L2CAP_PEER_CFG_UNACCEPTABLE     0
+#define L2CAP_PEER_CFG_OK               1
+#define L2CAP_PEER_CFG_DISCONNECT       2
+
+/* eL2CAP option constants */
+#define L2CAP_MIN_RETRANS_TOUT          2000    /* Min retransmission timeout if no flush timeout or PBF */
+#define L2CAP_MIN_MONITOR_TOUT          12000   /* Min monitor timeout if no flush timeout or PBF */
+
+#define L2CAP_MAX_FCR_CFG_TRIES         2       /* Config attempts before disconnecting */
+
+/* Only compiled in when in test mode. Production devices must not include
+*/
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+
+/* These are used for conformance and corruption testing only */
+typedef struct
+{
+    BOOLEAN in_use;                 /* TRUE if test in progress */
+    UINT8   type;                   /* Type of test to run or turns off random test */
+    UINT8   freq;                   /* One-shot or random */
+    BOOLEAN is_rx;                  /* TRUE if incoming packets */
+    UINT16  count;                  /* How many I-frames to drop in a row; used only with one-shot tests */
+} tL2C_FCR_TEST_CFG;
+
+typedef struct
+{
+    BOOLEAN in_use;                 /* TRUE if test in progress */
+    UINT8   skip_sframe_count;      /* Number of S-Frames to skip sending */
+} tL2C_FCR_CFM_TEST_CB;
+
+typedef struct
+{
+    tL2C_FCR_TEST_CFG       cfg;    /* Current corruption test configuration */
+    tL2C_FCR_CFM_TEST_CB    cfm;    /* Conformance test structure */
+} tL2C_FCR_TEST_CB;
+
+#endif /* L2CAP_CORRUPT_ERTM_PKTS == TRUE */
+
+typedef struct
+{
+    UINT8       next_tx_seq;                /* Next sequence number to be Tx'ed         */
+    UINT8       last_rx_ack;                /* Last sequence number ack'ed by the peer  */
+    UINT8       next_seq_expected;          /* Next peer sequence number expected       */
+    UINT8       last_ack_sent;              /* Last peer sequence number ack'ed         */
+    UINT8       num_tries;                  /* Number of retries to send a packet       */
+    UINT8       max_held_acks;              /* Max acks we can hold before sending      */
+
+    BOOLEAN     remote_busy;                /* TRUE if peer has flowed us off           */
+    BOOLEAN     local_busy;                 /* TRUE if we have flowed off the peer      */
+
+    BOOLEAN     rej_sent;                   /* Reject was sent                          */
+    BOOLEAN     srej_sent;                  /* Selective Reject was sent                */
+    BOOLEAN     wait_ack;                   /* Transmitter is waiting ack (poll sent)   */
+    BOOLEAN     rej_after_srej;             /* Send a REJ when SREJ clears              */
+
+    BOOLEAN     send_f_rsp;                 /* We need to send an F-bit response        */
+
+    UINT16      rx_sdu_len;                 /* Length of the SDU being received         */
+    BT_HDR      *p_rx_sdu;                  /* Buffer holding the SDU being received    */
+    BUFFER_Q    waiting_for_ack_q;          /* Buffers sent and waiting for peer to ack */
+    BUFFER_Q    srej_rcv_hold_q;            /* Buffers rcvd but held pending SREJ rsp   */
+    BUFFER_Q    retrans_q;                  /* Buffers being retransmitted              */
+
+    TIMER_LIST_ENT ack_timer;               /* Timer delaying RR                        */
+    TIMER_LIST_ENT mon_retrans_timer;       /* Timer Monitor or Retransmission          */
+
+#if (L2CAP_ERTM_STATS == TRUE)
+    UINT32      connect_tick_count;         /* Time channel was established             */
+    UINT32      ertm_pkt_counts[2];         /* Packets sent and received                */
+    UINT32      ertm_byte_counts[2];        /* Bytes   sent and received                */
+    UINT32      s_frames_sent[4];           /* S-frames sent (RR, REJ, RNR, SREJ)       */
+    UINT32      s_frames_rcvd[4];           /* S-frames rcvd (RR, REJ, RNR, SREJ)       */
+    UINT32      xmit_window_closed;         /* # of times the xmit window was closed    */
+    UINT32      controller_idle;            /* # of times less than 2 packets in controller */
+                                            /* when the xmit window was closed          */
+    UINT32      pkts_retransmitted;         /* # of packets that were retransmitted     */
+    UINT32      retrans_touts;              /* # of retransmission timouts              */
+    UINT32      xmit_ack_touts;             /* # of xmit ack timouts                    */
+
+#define L2CAP_ERTM_STATS_NUM_AVG 10
+#define L2CAP_ERTM_STATS_AVG_NUM_SAMPLES 100
+    UINT32      ack_delay_avg_count;
+    UINT32      ack_delay_avg_index;
+    UINT32      throughput_start;
+    UINT32      throughput[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_delay_avg[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_delay_min[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_delay_max[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_q_count_avg[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_q_count_min[L2CAP_ERTM_STATS_NUM_AVG];
+    UINT32      ack_q_count_max[L2CAP_ERTM_STATS_NUM_AVG];
+#endif
+
+#if L2CAP_CORRUPT_ERTM_PKTS == TRUE
+    tL2C_FCR_TEST_CB test_cb;               /* Used for SVT and UPF testing */
+#endif
+
+} tL2C_FCRB;
+
+
+/* Define a registration control block. Every application (e.g. RFCOMM, SDP,
+** TCS etc) that registers with L2CAP is assigned one of these.
+*/
+#if (L2CAP_UCD_INCLUDED == TRUE)
+#define L2C_UCD_RCB_ID              0x00
+#define L2C_UCD_STATE_UNUSED        0x00
+#define L2C_UCD_STATE_W4_DATA       0x01
+#define L2C_UCD_STATE_W4_RECEPTION  0x02
+#define L2C_UCD_STATE_W4_MTU        0x04
+
+typedef struct
+{
+    UINT8               state;
+    tL2CAP_UCD_CB_INFO  cb_info;
+} tL2C_UCD_REG;
+#endif
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    UINT16                  psm;
+    UINT16                  real_psm;               /* This may be a dummy RCB for an o/b connection but */
+                                                    /* this is the real PSM that we need to connect to   */
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    tL2C_UCD_REG            ucd;
+#endif
+
+    tL2CAP_APPL_INFO        api;
+} tL2C_RCB;
+
+
+/* Define a channel control block (CCB). There may be many channel control blocks
+** between the same two Bluetooth devices (i.e. on the same link).
+** Each CCB has unique local and remote CIDs. All channel control blocks on
+** the same physical link and are chained together.
+*/
+typedef struct t_l2c_ccb
+{
+    BOOLEAN             in_use;                 /* TRUE when in use, FALSE when not */
+    tL2C_CHNL_STATE     chnl_state;             /* Channel state                    */
+
+    struct t_l2c_ccb    *p_next_ccb;            /* Next CCB in the chain            */
+    struct t_l2c_ccb    *p_prev_ccb;            /* Previous CCB in the chain        */
+    struct t_l2c_linkcb *p_lcb;                 /* Link this CCB is assigned to     */
+
+    UINT16              local_cid;              /* Local CID                        */
+    UINT16              remote_cid;             /* Remote CID                       */
+
+    TIMER_LIST_ENT      timer_entry;            /* CCB Timer List Entry             */
+
+    tL2C_RCB            *p_rcb;                 /* Registration CB for this Channel */
+
+#define IB_CFG_DONE     0x01
+#define OB_CFG_DONE     0x02
+#define RECONFIG_FLAG   0x04                    /* True after initial configuration */
+#define CFG_DONE_MASK   (IB_CFG_DONE | OB_CFG_DONE)
+
+    UINT8               config_done;            /* Configuration flag word         */
+    UINT8               local_id;               /* Transaction ID for local trans  */
+    UINT8               remote_id;              /* Transaction ID for local  */
+
+#define CCB_FLAG_NO_RETRY       0x01            /* no more retry */
+#define CCB_FLAG_SENT_PENDING   0x02            /* already sent pending response */
+    UINT8               flags;
+
+    tL2CAP_CFG_INFO     our_cfg;                /* Our saved configuration options    */
+    tL2CAP_CH_CFG_BITS  peer_cfg_bits;          /* Store what peer wants to configure */
+    tL2CAP_CFG_INFO     peer_cfg;               /* Peer's saved configuration options */
+
+    BUFFER_Q            xmit_hold_q;            /* Transmit data hold queue         */
+
+    BOOLEAN             cong_sent;              /* Set when congested status sent   */
+    UINT16              buff_quota;             /* Buffer quota before sending congestion   */
+
+    tL2CAP_CHNL_PRIORITY ccb_priority;          /* Channel priority                 */
+    tL2CAP_CHNL_DATA_RATE tx_data_rate;         /* Channel Tx data rate             */
+    tL2CAP_CHNL_DATA_RATE rx_data_rate;         /* Channel Rx data rate             */
+
+    /* Fields used for eL2CAP */
+    tL2CAP_ERTM_INFO    ertm_info;
+    tL2C_FCRB           fcrb;
+    UINT16              tx_mps;                 /* TX MPS adjusted based on current controller */
+    UINT16              max_rx_mtu;
+    UINT8               fcr_cfg_tries;          /* Max number of negotiation attempts */
+    BOOLEAN             peer_cfg_already_rejected; /* If mode rejected once, set to TRUE */
+    BOOLEAN             out_cfg_fcr_present;    /* TRUE if cfg response shoulkd include fcr options */
+
+#define L2CAP_CFG_FCS_OUR   0x01                /* Our desired config FCS option */
+#define L2CAP_CFG_FCS_PEER  0x02                /* Peer's desired config FCS option */
+#define L2CAP_BYPASS_FCS    (L2CAP_CFG_FCS_OUR | L2CAP_CFG_FCS_PEER)
+    UINT8               bypass_fcs;
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    BOOLEAN             is_flushable;                   /* TRUE if channel is flushable     */
+#endif
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0) || (L2CAP_UCD_INCLUDED == TRUE)
+    UINT16              fixed_chnl_idle_tout;   /* Idle timeout to use for the fixed channel       */
+#endif
+
+} tL2C_CCB;
+
+/***********************************************************************
+** Define a queue of linked CCBs.
+*/
+typedef struct
+{
+    tL2C_CCB        *p_first_ccb;               /* The first channel in this queue */
+    tL2C_CCB        *p_last_ccb;                /* The last  channel in this queue */
+} tL2C_CCB_Q;
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+
+/* Round-Robin service for the same priority channels */
+#define L2CAP_NUM_CHNL_PRIORITY     3           /* Total number of priority group (high, medium, low)*/
+#define L2CAP_CHNL_PRIORITY_WEIGHT  5           /* weight per priority for burst transmission quota */
+#define L2CAP_GET_PRIORITY_QUOTA(pri) ((L2CAP_NUM_CHNL_PRIORITY - (pri)) * L2CAP_CHNL_PRIORITY_WEIGHT)
+
+/* CCBs within the same LCB are served in round robin with priority                       */
+/* It will make sure that low priority channel (for example, HF signaling on RFCOMM)      */
+/* can be sent to headset even if higher priority channel (for example, AV media channel) */
+/* is congested.                                                                          */
+
+typedef struct
+{
+    tL2C_CCB        *p_serve_ccb;               /* current serving ccb within priority group */
+    tL2C_CCB        *p_first_ccb;               /* first ccb of priority group */
+    UINT8           num_ccb;                    /* number of channels in priority group */
+    UINT8           quota;                      /* burst transmission quota */
+} tL2C_RR_SERV;
+
+#endif /* (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) */
+
+/* Define a link control block. There is one link control block between
+** this device and any other device (i.e. BD ADDR).
+*/
+typedef struct t_l2c_linkcb
+{
+    BOOLEAN             in_use;                     /* TRUE when in use, FALSE when not */
+    tL2C_LINK_STATE     link_state;
+
+    TIMER_LIST_ENT      timer_entry;                /* Timer list entry for timeout evt */
+    UINT16              handle;                     /* The handle used with LM          */
+
+    tL2C_CCB_Q          ccb_queue;                  /* Queue of CCBs on this LCB        */
+
+    tL2C_CCB            *p_pending_ccb;             /* ccb of waiting channel during link disconnect */
+    TIMER_LIST_ENT      info_timer_entry;           /* Timer entry for info resp timeout evt */
+    BD_ADDR             remote_bd_addr;             /* The BD address of the remote     */
+
+    UINT8               link_role;                  /* Master or slave                  */
+    UINT8               id;
+    tL2CA_ECHO_RSP_CB   *p_echo_rsp_cb;             /* Echo response callback           */
+    UINT16              idle_timeout;               /* Idle timeout                     */
+    BOOLEAN             is_bonding;                 /* True - link active only for bonding */
+
+    UINT16              link_flush_tout;            /* Flush timeout used               */
+
+    UINT16              link_xmit_quota;            /* Num outstanding pkts allowed     */
+    UINT16              sent_not_acked;             /* Num packets sent but not acked   */
+
+    BOOLEAN             partial_segment_being_sent; /* Set TRUE when a partial segment  */
+                                                    /* is being sent.                   */
+    BOOLEAN             w4_info_rsp;                /* TRUE when info request is active */
+    UINT8               info_rx_bits;               /* set 1 if received info type */
+    UINT32              peer_ext_fea;               /* Peer's extended features mask    */
+    BUFFER_Q            link_xmit_data_q;           /* Transmit data buffer queue       */
+
+    UINT8               peer_chnl_mask[L2CAP_FIXED_CHNL_ARRAY_SIZE];
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    UINT16              ucd_mtu;                    /* peer MTU on UCD */
+    BUFFER_Q            ucd_out_sec_pending_q;      /* Security pending outgoing UCD packet  */
+    BUFFER_Q            ucd_in_sec_pending_q;       /* Security pending incoming UCD packet  */
+#endif
+
+#if (L2CAP_HOST_FLOW_CTRL == TRUE)
+    UINT16              link_pkts_unacked;          /* Packets received but not acked   */
+    UINT16              link_ack_thresh;            /* Threshold at which to ack pkts   */
+#endif
+
+    BT_HDR              *p_hcit_rcv_acl;            /* Current HCIT ACL buf being rcvd  */
+    UINT16              idle_timeout_sv;            /* Save current Idle timeout        */
+    UINT8               acl_priority;               /* L2C_PRIORITY_NORMAL or L2C_PRIORITY_HIGH */
+    tL2CA_NOCP_CB       *p_nocp_cb;                 /* Num Cmpl pkts callback           */
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    tL2C_CCB            *p_fixed_ccbs[L2CAP_NUM_FIXED_CHNLS];
+    UINT16              disc_reason;
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+    BOOLEAN             is_ble_link;
+    tBLE_ADDR_TYPE      ble_addr_type;
+
+#define UPD_ENABLED     0  /* If peer requests update, we will change params */
+#define UPD_DISABLED    1  /* application requested not to update */
+#define UPD_PENDING     2  /* while updates are disabled, peer requested new parameters */
+#define UPD_UPDATED     3  /* peer updated connection parameters */
+    UINT8               upd_disabled;
+
+    UINT16              min_interval; /* parameters as requested by peripheral */
+    UINT16              max_interval;
+    UINT16              latency;
+    UINT16              timeout;
+
+#endif
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+    /* each priority group is limited burst transmission  */
+    /* round robin service for the same priority channels */
+    tL2C_RR_SERV        rr_serv[L2CAP_NUM_CHNL_PRIORITY];
+    UINT8               rr_pri;                             /* current serving priority group */
+#endif
+
+} tL2C_LCB;
+
+/* Define the L2CAP control structure
+*/
+typedef struct
+{
+    UINT8           l2cap_trace_level;
+    UINT16          controller_xmit_window;         /* Total ACL window for all links   */
+
+    UINT16          round_robin_quota;              /* Round-robin link quota           */
+    UINT16          round_robin_unacked;            /* Round-robin unacked              */
+    BOOLEAN         check_round_robin;              /* Do a round robin check           */
+
+    BOOLEAN         is_cong_cback_context;
+
+    tL2C_LCB        lcb_pool[MAX_L2CAP_LINKS];      /* Link Control Block pool          */
+    tL2C_CCB        ccb_pool[MAX_L2CAP_CHANNELS];   /* Channel Control Block pool       */
+    tL2C_RCB        rcb_pool[MAX_L2CAP_CLIENTS];    /* Registration info pool           */
+
+    tL2C_CCB        *p_free_ccb_first;              /* Pointer to first free CCB        */
+    tL2C_CCB        *p_free_ccb_last;               /* Pointer to last  free CCB        */
+
+    UINT8           desire_role;                    /* desire to be master/slave when accepting a connection */
+    BOOLEAN         disallow_switch;                /* FALSE, to allow switch at create conn */
+    UINT16          num_lm_acl_bufs;                /* # of ACL buffers on controller   */
+    UINT16          idle_timeout;                   /* Idle timeout                     */
+
+    BUFFER_Q        rcv_hold_q;                     /* Recv pending queue               */
+    TIMER_LIST_ENT  rcv_hold_tle;                   /* Timer list entry for rcv hold    */
+
+    tL2C_LCB        *p_cur_hcit_lcb;                /* Current HCI Transport buffer     */
+    UINT16          num_links_active;               /* Number of links active           */
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    UINT16          non_flushable_pbf;              /* L2CAP_PKT_START_NON_FLUSHABLE if controller supports */
+                                                    /* Otherwise, L2CAP_PKT_START */
+    BOOLEAN         is_flush_active;                /* TRUE if an HCI_Enhanced_Flush has been sent */
+#endif
+
+#if L2CAP_CONFORMANCE_TESTING == TRUE
+    UINT32          test_info_resp;                 /* Conformance testing needs a dynamic response */
+#endif
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    tL2CAP_FIXED_CHNL_REG   fixed_reg[L2CAP_NUM_FIXED_CHNLS];   /* Reg info for fixed channels */
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+    BOOLEAN                  is_ble_connecting;
+    BD_ADDR                  ble_connecting_bda;
+    UINT16                   controller_le_xmit_window;         /* Total ACL window for all links   */
+    UINT16                   num_lm_ble_bufs;                   /* # of ACL buffers on controller   */
+#endif
+
+    tL2CA_ECHO_DATA_CB      *p_echo_data_cb;                /* Echo data callback */
+
+#if (defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) && (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE))
+    UINT16              high_pri_min_xmit_quota;    /* Minimum number of ACL credit for high priority link */
+#endif /* (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE) */
+
+    UINT16          dyn_psm;
+} tL2C_CB;
+
+
+
+/* Define a structure that contains the information about a connection.
+** This structure is used to pass between functions, and not all the
+** fields will always be filled in.
+*/
+typedef struct
+{
+    BD_ADDR         bd_addr;                        /* Remote BD address        */
+    UINT8           status;                         /* Connection status        */
+    UINT16          psm;                            /* PSM of the connection    */
+    UINT16          l2cap_result;                   /* L2CAP result             */
+    UINT16          l2cap_status;                   /* L2CAP status             */
+    UINT16          remote_cid;                     /* Remote CID               */
+} tL2C_CONN_INFO;
+
+
+typedef void (tL2C_FCR_MGMT_EVT_HDLR) (UINT8, tL2C_CCB *);
+
+/* The offset in a buffer that L2CAP will use when building commands.
+*/
+#define L2CAP_SEND_CMD_OFFSET       0
+
+
+/* Number of ACL buffers to use for high priority channel
+*/
+#if (!defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) || (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == FALSE))
+#define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A     (L2CAP_HIGH_PRI_MIN_XMIT_QUOTA)
+#else
+#define L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A     (l2cb.high_pri_min_xmit_quota)
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* L2CAP global data
+************************************
+*/
+#if (!defined L2C_DYNAMIC_MEMORY) || (L2C_DYNAMIC_MEMORY == FALSE)
+L2C_API extern tL2C_CB  l2cb;
+#else
+L2C_API extern tL2C_CB *l2c_cb_ptr;
+#define l2cb (*l2c_cb_ptr)
+#endif
+
+
+/* Functions provided by l2c_main.c
+************************************
+*/
+extern void     l2c_init (void);
+extern void     l2c_process_timeout (TIMER_LIST_ENT *p_tle);
+extern UINT8    l2c_data_write (UINT16 cid, BT_HDR *p_data, UINT16 flag);
+extern void     l2c_rcv_acl_data (BT_HDR *p_msg);
+extern void     l2c_process_held_packets (BOOLEAN timed_out);
+
+/* Functions provided by l2c_utils.c
+************************************
+*/
+extern tL2C_LCB *l2cu_allocate_lcb (BD_ADDR p_bd_addr, BOOLEAN is_bonding);
+extern BOOLEAN  l2cu_start_post_bond_timer (UINT16 handle);
+extern void     l2cu_release_lcb (tL2C_LCB *p_lcb);
+extern tL2C_LCB *l2cu_find_lcb_by_bd_addr (BD_ADDR p_bd_addr);
+extern tL2C_LCB *l2cu_find_lcb_by_handle (UINT16 handle);
+extern void     l2cu_update_lcb_4_bonding (BD_ADDR p_bd_addr, BOOLEAN is_bonding);
+
+extern UINT8    l2cu_get_conn_role (tL2C_LCB *p_this_lcb);
+extern BOOLEAN  l2cu_set_acl_priority (BD_ADDR bd_addr, UINT8 priority, BOOLEAN reset_after_rs);
+
+extern void     l2cu_enqueue_ccb (tL2C_CCB *p_ccb);
+extern void     l2cu_dequeue_ccb (tL2C_CCB *p_ccb);
+extern void     l2cu_change_pri_ccb (tL2C_CCB *p_ccb, tL2CAP_CHNL_PRIORITY priority);
+
+extern tL2C_CCB *l2cu_allocate_ccb (tL2C_LCB *p_lcb, UINT16 cid);
+extern void     l2cu_release_ccb (tL2C_CCB *p_ccb);
+extern tL2C_CCB *l2cu_find_ccb_by_cid (tL2C_LCB *p_lcb, UINT16 local_cid);
+extern tL2C_CCB *l2cu_find_ccb_by_remote_cid (tL2C_LCB *p_lcb, UINT16 remote_cid);
+extern void     l2cu_adj_id (tL2C_LCB *p_lcb, UINT8 adj_mask);
+
+extern void     l2cu_send_peer_cmd_reject (tL2C_LCB *p_lcb, UINT16 reason,
+                                           UINT8 rem_id,UINT16 p1, UINT16 p2);
+extern void     l2cu_send_peer_connect_req (tL2C_CCB *p_ccb);
+extern void     l2cu_send_peer_connect_rsp (tL2C_CCB *p_ccb, UINT16 result, UINT16 status);
+extern void     l2cu_send_peer_config_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2cu_send_peer_config_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2cu_send_peer_config_rej (tL2C_CCB *p_ccb, UINT8 *p_data, UINT16 data_len, UINT16 rej_len);
+extern void     l2cu_send_peer_disc_req (tL2C_CCB *p_ccb);
+extern void     l2cu_send_peer_disc_rsp (tL2C_LCB *p_lcb, UINT8 remote_id, UINT16 local_cid, UINT16 remote_cid);
+extern void     l2cu_send_peer_echo_req (tL2C_LCB *p_lcb, UINT8 *p_data, UINT16 data_len);
+extern void     l2cu_send_peer_echo_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len);
+extern void     l2cu_send_peer_info_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT16 info_type);
+extern void     l2cu_reject_connection (tL2C_LCB *p_lcb, UINT16 remote_cid, UINT8 rem_id, UINT16 result);
+extern void     l2cu_send_peer_info_req (tL2C_LCB *p_lcb, UINT16 info_type);
+extern void     l2cu_set_acl_hci_header (BT_HDR *p_buf, tL2C_CCB *p_ccb);
+extern void     l2cu_check_channel_congestion (tL2C_CCB *p_ccb);
+extern void     l2cu_disconnect_chnl (tL2C_CCB *p_ccb);
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+extern void     l2cu_set_non_flushable_pbf(BOOLEAN);
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+extern void l2cu_send_peer_ble_par_req (tL2C_LCB *p_lcb, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout);
+extern void l2cu_send_peer_ble_par_rsp (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id);
+#endif
+
+extern BOOLEAN l2cu_initialize_fixed_ccb (tL2C_LCB *p_lcb, UINT16 fixed_cid, tL2CAP_FCR_OPTS *p_fcr);
+extern void    l2cu_no_dynamic_ccbs (tL2C_LCB *p_lcb);
+extern void    l2cu_process_fixed_chnl_resp (tL2C_LCB *p_lcb);
+
+/* Functions provided by l2c_ucd.c
+************************************
+*/
+#if (L2CAP_UCD_INCLUDED == TRUE)
+void l2c_ucd_delete_sec_pending_q(tL2C_LCB  *p_lcb);
+void l2c_ucd_enqueue_pending_out_sec_q(tL2C_CCB  *p_ccb, void *p_data);
+BOOLEAN l2c_ucd_check_pending_info_req(tL2C_CCB  *p_ccb);
+BOOLEAN l2c_ucd_check_pending_out_sec_q(tL2C_CCB  *p_ccb);
+void l2c_ucd_send_pending_out_sec_q(tL2C_CCB  *p_ccb);
+void l2c_ucd_discard_pending_out_sec_q(tL2C_CCB  *p_ccb);
+BOOLEAN l2c_ucd_check_pending_in_sec_q(tL2C_CCB  *p_ccb);
+void l2c_ucd_send_pending_in_sec_q(tL2C_CCB  *p_ccb);
+void l2c_ucd_discard_pending_in_sec_q(tL2C_CCB  *p_ccb);
+BOOLEAN l2c_ucd_check_rx_pkts(tL2C_LCB  *p_lcb, BT_HDR *p_msg);
+BOOLEAN l2c_ucd_process_event(tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+extern void l2cu_send_peer_ble_par_req (tL2C_LCB *p_lcb, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout);
+extern void l2cu_send_peer_ble_par_rsp (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id);
+#endif
+
+extern BOOLEAN l2cu_initialize_fixed_ccb (tL2C_LCB *p_lcb, UINT16 fixed_cid, tL2CAP_FCR_OPTS *p_fcr);
+extern void    l2cu_no_dynamic_ccbs (tL2C_LCB *p_lcb);
+extern void    l2cu_process_fixed_chnl_resp (tL2C_LCB *p_lcb);
+
+
+/* Functions provided for Broadcom Aware
+****************************************
+*/
+extern BOOLEAN  l2cu_check_feature_req (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len);
+extern void     l2cu_check_feature_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len);
+extern void     l2cu_send_feature_req (tL2C_CCB *p_ccb);
+
+extern tL2C_RCB *l2cu_allocate_rcb (UINT16 psm);
+extern tL2C_RCB *l2cu_find_rcb_by_psm (UINT16 psm);
+extern void     l2cu_release_rcb (tL2C_RCB *p_rcb);
+
+extern UINT8    l2cu_process_peer_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2cu_process_peer_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2cu_process_our_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2cu_process_our_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+
+extern void     l2cu_device_reset (void);
+extern tL2C_LCB *l2cu_find_lcb_by_state (tL2C_LINK_STATE state);
+extern BOOLEAN  l2cu_lcb_disconnecting (void);
+
+extern BOOLEAN l2cu_create_conn (tL2C_LCB *p_lcb);
+extern BOOLEAN l2cu_create_conn_after_switch (tL2C_LCB *p_lcb);
+extern BT_HDR *l2cu_get_next_buffer_to_send (tL2C_LCB *p_lcb);
+extern void    l2cu_resubmit_pending_sec_req (BD_ADDR p_bda);
+extern void    l2cu_initialize_amp_ccb (tL2C_LCB *p_lcb);
+extern void    l2cu_adjust_out_mps (tL2C_CCB *p_ccb);
+
+/* Functions provided by l2c_link.c
+************************************
+*/
+extern BOOLEAN  l2c_link_hci_conn_req (BD_ADDR bd_addr);
+extern BOOLEAN  l2c_link_hci_conn_comp (UINT8 status, UINT16 handle, BD_ADDR p_bda);
+extern BOOLEAN  l2c_link_hci_disc_comp (UINT16 handle, UINT8 reason);
+extern BOOLEAN  l2c_link_hci_qos_violation (UINT16 handle);
+extern void     l2c_link_timeout (tL2C_LCB *p_lcb);
+extern void     l2c_info_timeout (tL2C_LCB *p_lcb);
+extern void     l2c_link_check_send_pkts (tL2C_LCB *p_lcb, tL2C_CCB *p_ccb, BT_HDR *p_buf);
+extern void     l2c_link_adjust_allocation (void);
+extern void     l2c_link_process_num_completed_pkts (UINT8 *p);
+extern void     l2c_link_process_num_completed_blocks (UINT8 controller_id, UINT8 *p, UINT16 evt_len);
+extern void     l2c_link_processs_num_bufs (UINT16 num_lm_acl_bufs);
+extern UINT8    l2c_link_pkts_rcvd (UINT16 *num_pkts, UINT16 *handles);
+extern void     l2c_link_role_changed (BD_ADDR bd_addr, UINT8 new_role, UINT8 hci_status);
+extern void     l2c_link_sec_comp (BD_ADDR p_bda, void *p_ref_data, UINT8 status);
+extern void     l2c_link_segments_xmitted (BT_HDR *p_msg);
+extern void     l2c_pin_code_request (BD_ADDR bd_addr);
+extern void     l2c_link_adjust_chnl_allocation (void);
+
+#if (BLE_INCLUDED == TRUE)
+extern void     l2c_link_processs_ble_num_bufs (UINT16 num_lm_acl_bufs);
+#endif
+
+#if ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE)
+extern BOOLEAN  l2c_link_check_power_mode ( tL2C_LCB *p_lcb );
+#define L2C_LINK_CHECK_POWER_MODE(x) l2c_link_check_power_mode ((x))
+#else
+#define L2C_LINK_CHECK_POWER_MODE(x) (FALSE)
+#endif
+
+#if L2CAP_CONFORMANCE_TESTING == TRUE
+/* Used only for conformance testing */
+L2C_API extern void l2cu_set_info_rsp_mask (UINT32 mask);
+#endif
+
+/* Functions provided by l2c_csm.c
+************************************
+*/
+extern void l2c_csm_execute (tL2C_CCB *p_ccb, UINT16 event, void *p_data);
+
+L2C_API extern BT_HDR   *l2cap_link_chk_pkt_start(BT_HDR *);    /* Called at start of rcv to check L2CAP segmentation */
+L2C_API extern BOOLEAN   l2cap_link_chk_pkt_end (void);         /* Called at end   of rcv to check L2CAP segmentation */
+
+L2C_API extern void     l2c_enqueue_peer_data (tL2C_CCB *p_ccb, BT_HDR *p_buf);
+
+
+/* Functions provided by l2c_fcr.c
+************************************
+*/
+extern void     l2c_fcr_cleanup (tL2C_CCB *p_ccb);
+extern void     l2c_fcr_proc_pdu (tL2C_CCB *p_ccb, BT_HDR *p_buf);
+extern void     l2c_fcr_proc_tout (tL2C_CCB *p_ccb);
+extern void     l2c_fcr_proc_ack_tout (tL2C_CCB *p_ccb);
+extern void     l2c_fcr_send_S_frame (tL2C_CCB *p_ccb, UINT16 function_code, UINT16 pf_bit);
+extern BT_HDR   *l2c_fcr_clone_buf (BT_HDR *p_buf, UINT16 new_offset, UINT16 no_of_bytes, UINT8 pool);
+extern BOOLEAN  l2c_fcr_is_flow_controlled (tL2C_CCB *p_ccb);
+extern BT_HDR   *l2c_fcr_get_next_xmit_sdu_seg (tL2C_CCB *p_ccb, UINT16 max_packet_length);
+extern void     l2c_fcr_start_timer (tL2C_CCB *p_ccb);
+
+/* Configuration negotiation */
+extern UINT8    l2c_fcr_chk_chan_modes (tL2C_CCB *p_ccb);
+extern BOOLEAN  l2c_fcr_adj_our_req_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2c_fcr_adj_our_rsp_options (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_peer_cfg);
+extern BOOLEAN  l2c_fcr_renegotiate_chan(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern UINT8    l2c_fcr_process_peer_cfg_req(tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg);
+extern void     l2c_fcr_adj_monitor_retran_timeout (tL2C_CCB *p_ccb);
+extern void     l2c_fcr_stop_timer (tL2C_CCB *p_ccb);
+
+/* Functions provided by l2c_ble.c
+************************************
+*/
+#if (BLE_INCLUDED == TRUE)
+extern BOOLEAN l2cble_create_conn (tL2C_LCB *p_lcb);
+extern void l2cble_process_sig_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len);
+extern void l2cble_conn_comp (UINT16 handle, UINT8 role, BD_ADDR bda, tBLE_ADDR_TYPE type,
+                              UINT16 conn_interval, UINT16 conn_latency, UINT16 conn_timeout);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/stack/l2cap/l2c_link.c b/stack/l2cap/l2c_link.c
new file mode 100644
index 0000000..401084a
--- /dev/null
+++ b/stack/l2cap/l2c_link.c
@@ -0,0 +1,1719 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the functions relating to link management. A "link"
+ *  is a connection between this device and another device. Only ACL links
+ *  are managed.
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "l2c_api.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+static BOOLEAN l2c_link_send_to_lower (tL2C_LCB *p_lcb, BT_HDR *p_buf);
+
+#define L2C_LINK_SEND_ACL_DATA(x)  HCI_ACL_DATA_TO_LOWER((x))
+
+#if (BLE_INCLUDED == TRUE)
+#define L2C_LINK_SEND_BLE_ACL_DATA(x)  HCI_BLE_ACL_DATA_TO_LOWER((x))
+#endif
+
+/*******************************************************************************
+**
+** Function         l2c_link_hci_conn_req
+**
+** Description      This function is called when an HCI Connection Request
+**                  event is received.
+**
+** Returns          TRUE, if accept conn
+**
+*******************************************************************************/
+BOOLEAN l2c_link_hci_conn_req (BD_ADDR bd_addr)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_LCB        *p_lcb_cur;
+    int             xx;
+    BOOLEAN         no_links;
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr);
+
+    /* If we don't have one, create one and accept the connection. */
+    if (!p_lcb)
+    {
+        p_lcb = l2cu_allocate_lcb (bd_addr, FALSE);
+        if (!p_lcb)
+        {
+            btsnd_hcic_reject_conn (bd_addr, HCI_ERR_HOST_REJECT_RESOURCES);
+            L2CAP_TRACE_ERROR0 ("L2CAP failed to allocate LCB");
+            return FALSE;
+        }
+
+        no_links = TRUE;
+
+        /* If we already have connection, accept as a master */
+        for (xx = 0, p_lcb_cur = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb_cur++)
+        {
+            if (p_lcb_cur == p_lcb)
+                continue;
+
+            if (p_lcb_cur->in_use)
+            {
+                no_links = FALSE;
+                p_lcb->link_role = HCI_ROLE_MASTER;
+                break;
+            }
+        }
+
+        if (no_links)
+        {
+            if (!btm_dev_support_switch (bd_addr))
+                p_lcb->link_role = HCI_ROLE_SLAVE;
+            else
+                p_lcb->link_role = l2cu_get_conn_role(p_lcb);
+        }
+
+        /* Tell the other side we accept the connection */
+        btsnd_hcic_accept_conn (bd_addr, p_lcb->link_role);
+
+        p_lcb->link_state = LST_CONNECTING;
+
+        /* Start a timer waiting for connect complete */
+        btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_CONNECT_TOUT);
+        return (TRUE);
+    }
+
+    /* We already had a link control block to the guy. Check what state it is in */
+    if ((p_lcb->link_state == LST_CONNECTING) || (p_lcb->link_state == LST_CONNECT_HOLDING))
+    {
+        /* Connection collision. Accept the connection anyways. */
+
+        if (!btm_dev_support_switch (bd_addr))
+            p_lcb->link_role = HCI_ROLE_SLAVE;
+        else
+            p_lcb->link_role = l2cu_get_conn_role(p_lcb);
+
+        btsnd_hcic_accept_conn (bd_addr, p_lcb->link_role);
+
+        p_lcb->link_state = LST_CONNECTING;
+        return (TRUE);
+    }
+    else if (p_lcb->link_state == LST_DISCONNECTING)
+    {
+        /* In disconnecting state, reject the connection. */
+        btsnd_hcic_reject_conn (bd_addr, HCI_ERR_HOST_REJECT_DEVICE);
+    }
+    else
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP got conn_req while connected");
+    }
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_hci_conn_comp
+**
+** Description      This function is called when an HCI Connection Complete
+**                  event is received.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN l2c_link_hci_conn_comp (UINT8 status, UINT16 handle, BD_ADDR p_bda)
+{
+    tL2C_CONN_INFO       ci;
+    tL2C_LCB            *p_lcb;
+    tL2C_CCB            *p_ccb;
+    tBTM_SEC_DEV_REC    *p_dev_info = NULL;
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_acl_update_busy_level (BTM_BLI_PAGE_DONE_EVT);
+#endif
+
+    /* Save the parameters */
+    ci.status       = status;
+    memcpy (ci.bd_addr, p_bda, BD_ADDR_LEN);
+
+    /* See if we have a link control block for the remote device */
+    p_lcb = l2cu_find_lcb_by_bd_addr (ci.bd_addr);
+
+    /* If we don't have one, this is an error */
+    if (!p_lcb)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP got conn_comp for unknown BD_ADDR");
+        return (FALSE);
+    }
+
+    if (p_lcb->link_state != LST_CONNECTING)
+    {
+        L2CAP_TRACE_ERROR2 ("L2CAP got conn_comp in bad state: %d  status: 0x%d", p_lcb->link_state, status);
+
+        if (status != HCI_SUCCESS)
+            l2c_link_hci_disc_comp (p_lcb->handle, status);
+
+        return (FALSE);
+    }
+
+    /* Save the handle */
+    p_lcb->handle = handle;
+
+    if (ci.status == HCI_SUCCESS)
+    {
+        /* Connected OK. Change state to connected */
+        p_lcb->link_state = LST_CONNECTED;
+
+        /* Get the peer information if the l2cap flow-control/rtrans is supported */
+        l2cu_send_peer_info_req (p_lcb, L2CAP_EXTENDED_FEATURES_INFO_TYPE);
+
+        /* Tell BTM Acl management about the link */
+        if ((p_dev_info = btm_find_dev (p_bda)) != NULL)
+            btm_acl_created (ci.bd_addr, p_dev_info->dev_class,
+                             p_dev_info->sec_bd_name, handle,
+                             p_lcb->link_role, FALSE);
+        else
+            btm_acl_created (ci.bd_addr, NULL, NULL, handle, p_lcb->link_role, FALSE);
+
+        /* If dedicated bonding do not process any further */
+        if (p_lcb->is_bonding)
+        {
+            if (l2cu_start_post_bond_timer(handle))
+                return (TRUE);
+        }
+
+        /* Update the timeouts in the hold queue */
+        l2c_process_held_packets(FALSE);
+
+        btu_stop_timer (&p_lcb->timer_entry);
+
+        /* For all channels, send the event through their FSMs */
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+        {
+            l2c_csm_execute (p_ccb, L2CEVT_LP_CONNECT_CFM, &ci);
+        }
+
+        if (p_lcb->p_echo_rsp_cb)
+        {
+            l2cu_send_peer_echo_req (p_lcb, NULL, 0);
+            btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_ECHO_RSP_TOUT);
+        }
+        else if (!p_lcb->ccb_queue.p_first_ccb)
+        {
+            btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_STARTUP_TOUT);
+        }
+    }
+    /* Max number of acl connections.                          */
+    /* If there's an lcb disconnecting set this one to holding */
+    else if ((ci.status == HCI_ERR_MAX_NUM_OF_CONNECTIONS) && l2cu_lcb_disconnecting())
+    {
+        p_lcb->link_state = LST_CONNECT_HOLDING;
+        p_lcb->handle = HCI_INVALID_HANDLE;
+    }
+    else
+    {
+        /* Just in case app decides to try again in the callback context */
+        p_lcb->link_state = LST_DISCONNECTING;
+
+        /* Connection failed. For all channels, send the event through */
+        /* their FSMs. The CCBs should remove themselves from the LCB  */
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; )
+        {
+            tL2C_CCB *pn = p_ccb->p_next_ccb;
+
+            l2c_csm_execute (p_ccb, L2CEVT_LP_CONNECT_CFM_NEG, &ci);
+
+            p_ccb = pn;
+        }
+
+        p_lcb->disc_reason = status;
+        /* Release the LCB */
+        if (p_lcb->ccb_queue.p_first_ccb == NULL)
+            l2cu_release_lcb (p_lcb);
+        else                              /* there are any CCBs remaining */
+        {
+            if (ci.status == HCI_ERR_CONNECTION_EXISTS)
+            {
+                /* we are in collision situation, wait for connecttion request from controller */
+                p_lcb->link_state = LST_CONNECTING;
+            }
+            else
+            {
+                l2cu_create_conn(p_lcb);
+            }
+        }
+    }
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_link_sec_comp
+**
+** Description      This function is called when required security procedures
+**                  are completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_sec_comp (BD_ADDR p_bda, void *p_ref_data, UINT8 status)
+{
+    tL2C_CONN_INFO  ci;
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_CCB        *p_next_ccb;
+    UINT8           event;
+
+    L2CAP_TRACE_DEBUG2 ("l2c_link_sec_comp: %d, 0x%x", status, p_ref_data);
+
+    if (status == BTM_SUCCESS_NO_SECURITY)
+        status = BTM_SUCCESS;
+
+    /* Save the parameters */
+    ci.status       = status;
+    memcpy (ci.bd_addr, p_bda, BD_ADDR_LEN);
+
+    p_lcb = l2cu_find_lcb_by_bd_addr (p_bda);
+
+    /* If we don't have one, this is an error */
+    if (!p_lcb)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP got sec_comp for unknown BD_ADDR");
+        return;
+    }
+
+    /* Match p_ccb with p_ref_data returned by sec manager */
+    for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_next_ccb)
+    {
+        p_next_ccb = p_ccb->p_next_ccb;
+
+        if (p_ccb == p_ref_data)
+        {
+            switch(status)
+            {
+            case BTM_SUCCESS:
+                L2CAP_TRACE_DEBUG1 ("ccb timer ticks: %u", p_ccb->timer_entry.ticks);
+                event = L2CEVT_SEC_COMP;
+                break;
+
+            case BTM_DELAY_CHECK:
+                /* start a timer - encryption change not received before L2CAP connect req */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, L2CAP_DELAY_CHECK_SM4);
+                return;
+
+            default:
+                event = L2CEVT_SEC_COMP_NEG;
+            }
+            l2c_csm_execute (p_ccb, event, &ci);
+            break;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_link_hci_disc_comp
+**
+** Description      This function is called when an HCI Disconnect Complete
+**                  event is received.
+**
+** Returns          TRUE if the link is known about, else FALSE
+**
+*******************************************************************************/
+BOOLEAN l2c_link_hci_disc_comp (UINT16 handle, UINT8 reason)
+{
+    tL2C_LCB    *p_lcb;
+    tL2C_CCB    *p_ccb;
+    BOOLEAN     status = TRUE;
+    BOOLEAN     lcb_is_free = TRUE;
+
+    /* See if we have a link control block for the connection */
+    p_lcb = l2cu_find_lcb_by_handle (handle);
+
+    /* If we don't have one, maybe an SCO link. Send to MM */
+    if (!p_lcb)
+    {
+        status = FALSE;
+    }
+    else
+    {
+        /* There can be a case when we rejected PIN code authentication */
+        /* otherwise save a new reason */
+        if (btm_cb.acl_disc_reason != HCI_ERR_HOST_REJECT_SECURITY)
+            btm_cb.acl_disc_reason = reason;
+
+        p_lcb->disc_reason = btm_cb.acl_disc_reason;
+
+        /* Just in case app decides to try again in the callback context */
+        p_lcb->link_state = LST_DISCONNECTING;
+
+        /* Link is disconnected. For all channels, send the event through */
+        /* their FSMs. The CCBs should remove themselves from the LCB     */
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; )
+        {
+            tL2C_CCB *pn = p_ccb->p_next_ccb;
+
+            /* Keep connect pending control block (if exists)
+             * Possible Race condition when a reconnect occurs
+             * on the channel during a disconnect of link. This
+             * ccb will be automatically retried after link disconnect
+             * arrives
+             */
+            if (p_ccb != p_lcb->p_pending_ccb)
+            {
+                l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, &reason);
+            }
+            p_ccb = pn;
+        }
+
+#if BTM_SCO_INCLUDED == TRUE
+        /* Tell SCO management to drop any SCOs on this ACL */
+        btm_sco_acl_removed (p_lcb->remote_bd_addr);
+#endif
+
+        /* If waiting for disconnect and reconnect is pending start the reconnect now
+           race condition where layer above issued connect request on link that was
+           disconnecting
+         */
+        if (p_lcb->ccb_queue.p_first_ccb != NULL)
+        {
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+            /* If we are going to re-use the LCB without dropping it, release all fixed channels here */
+            int         xx;
+
+            for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+            {
+                if (p_lcb->p_fixed_ccbs[xx])
+                {
+                    (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, FALSE, p_lcb->disc_reason);
+                    l2cu_release_ccb (p_lcb->p_fixed_ccbs[xx]);
+
+                    p_lcb->p_fixed_ccbs[xx] = NULL;
+                }
+            }
+#endif
+            L2CAP_TRACE_DEBUG0("l2c_link_hci_disc_comp: Restarting pending ACL request");
+
+            if (l2cu_create_conn(p_lcb))
+                lcb_is_free = FALSE; /* still using this lcb */
+        }
+
+        p_lcb->p_pending_ccb = NULL;
+
+        /* Release the LCB */
+        if (lcb_is_free)
+            l2cu_release_lcb (p_lcb);
+    }
+
+    /* Now that we have a free acl connection, see if any lcbs are pending */
+    if (lcb_is_free && ((p_lcb = l2cu_find_lcb_by_state(LST_CONNECT_HOLDING)) != NULL))
+    {
+        /* we found one-- create a connection */
+        l2cu_create_conn(p_lcb);
+    }
+
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_link_hci_qos_violation
+**
+** Description      This function is called when an HCI QOS Violation
+**                  event is received.
+**
+** Returns          TRUE if the link is known about, else FALSE
+**
+*******************************************************************************/
+BOOLEAN l2c_link_hci_qos_violation (UINT16 handle)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+
+    /* See if we have a link control block for the connection */
+    p_lcb = l2cu_find_lcb_by_handle (handle);
+
+    /* If we don't have one, maybe an SCO link. */
+    if (!p_lcb)
+        return (FALSE);
+
+    /* For all channels, tell the upper layer about it */
+    for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+    {
+        if (p_ccb->p_rcb->api.pL2CA_QoSViolationInd_Cb)
+            l2c_csm_execute (p_ccb, L2CEVT_LP_QOS_VIOLATION_IND, NULL);
+    }
+
+    return (TRUE);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         l2c_link_timeout
+**
+** Description      This function is called when a link timer expires
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_timeout (tL2C_LCB *p_lcb)
+{
+    tL2C_CCB   *p_ccb;
+    UINT16      timeout;
+    tBTM_STATUS rc;
+
+     L2CAP_TRACE_EVENT3 ("L2CAP - l2c_link_timeout() link state %d first CCB %p is_bonding:%d",
+         p_lcb->link_state, p_lcb->ccb_queue.p_first_ccb, p_lcb->is_bonding);
+
+    /* If link was connecting or disconnecting, clear all channels and drop the LCB */
+    if ((p_lcb->link_state == LST_CONNECTING_WAIT_SWITCH) ||
+        (p_lcb->link_state == LST_CONNECTING) ||
+        (p_lcb->link_state == LST_CONNECT_HOLDING) ||
+        (p_lcb->link_state == LST_DISCONNECTING))
+    {
+        p_lcb->p_pending_ccb = NULL;
+
+        /* For all channels, send a disconnect indication event through */
+        /* their FSMs. The CCBs should remove themselves from the LCB   */
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; )
+        {
+            tL2C_CCB *pn = p_ccb->p_next_ccb;
+
+            l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL);
+
+            p_ccb = pn;
+        }
+#if (BLE_INCLUDED == TRUE)
+        if (p_lcb->link_state == LST_CONNECTING &&
+            l2cb.is_ble_connecting == TRUE)
+        {
+            L2CA_CancelBleConnectReq(l2cb.ble_connecting_bda);
+        }
+#endif
+        /* Release the LCB */
+        l2cu_release_lcb (p_lcb);
+    }
+
+    /* If link is connected, check for inactivity timeout */
+    if (p_lcb->link_state == LST_CONNECTED)
+    {
+        /* Check for ping outstanding */
+        if (p_lcb->p_echo_rsp_cb)
+        {
+            tL2CA_ECHO_RSP_CB *p_cb = p_lcb->p_echo_rsp_cb;
+
+            /* Zero out the callback in case app immediately calls us again */
+            p_lcb->p_echo_rsp_cb = NULL;
+
+            (*p_cb) (L2CAP_PING_RESULT_NO_RESP);
+
+             L2CAP_TRACE_WARNING0 ("L2CAP - ping timeout");
+
+            /* For all channels, send a disconnect indication event through */
+            /* their FSMs. The CCBs should remove themselves from the LCB   */
+            for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; )
+            {
+                tL2C_CCB *pn = p_ccb->p_next_ccb;
+
+                l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL);
+
+                p_ccb = pn;
+            }
+        }
+
+        /* If no channels in use, drop the link. */
+        if (!p_lcb->ccb_queue.p_first_ccb)
+        {
+            rc = btm_sec_disconnect (p_lcb->handle, HCI_ERR_PEER_USER);
+
+            if (rc == BTM_CMD_STORED)
+            {
+                /* Security Manager will take care of disconnecting, state will be updated at that time */
+                timeout = 0xFFFF;
+            }
+            else if (rc == BTM_CMD_STARTED)
+            {
+                p_lcb->link_state = LST_DISCONNECTING;
+                timeout = L2CAP_LINK_DISCONNECT_TOUT;
+            }
+            else if (rc == BTM_SUCCESS)
+            {
+                /* BTM SEC will make sure that link is release (probably after pairing is done) */
+                p_lcb->link_state = LST_DISCONNECTING;
+                timeout = 0xFFFF;
+            }
+            else if (rc == BTM_BUSY)
+            {
+                /* BTM is still executing security process. Let lcb stay as connected */
+                timeout = 0xFFFF;
+            }
+            else if ((p_lcb->is_bonding)
+                  && (btsnd_hcic_disconnect (p_lcb->handle, HCI_ERR_PEER_USER)))
+            {
+                p_lcb->link_state = LST_DISCONNECTING;
+                timeout = L2CAP_LINK_DISCONNECT_TOUT;
+            }
+            else
+            {
+                /* probably no buffer to send disconnect */
+                timeout = BT_1SEC_TIMEOUT;
+            }
+
+            if (timeout != 0xFFFF)
+            {
+                btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, timeout);
+            }
+        }
+        else
+        {
+            /* Check in case we were flow controlled */
+            l2c_link_check_send_pkts (p_lcb, NULL, NULL);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_info_timeout
+**
+** Description      This function is called when an info request times out
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_info_timeout (tL2C_LCB *p_lcb)
+{
+    tL2C_CCB   *p_ccb;
+    tL2C_CONN_INFO  ci;
+
+    /* If we timed out waiting for info response, just continue using basic if allowed */
+    if (p_lcb->w4_info_rsp)
+    {
+        /* If waiting for security complete, restart the info response timer */
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+        {
+            if ( (p_ccb->chnl_state == CST_ORIG_W4_SEC_COMP) || (p_ccb->chnl_state == CST_TERM_W4_SEC_COMP) )
+            {
+                btu_start_timer (&p_lcb->info_timer_entry, BTU_TTYPE_L2CAP_INFO, L2CAP_WAIT_INFO_RSP_TOUT);
+                return;
+            }
+        }
+
+        p_lcb->w4_info_rsp = FALSE;
+
+        /* If link is in process of being brought up */
+        if ((p_lcb->link_state != LST_DISCONNECTED) &&
+            (p_lcb->link_state != LST_DISCONNECTING))
+        {
+            /* Notify active channels that peer info is finished */
+            if (p_lcb->ccb_queue.p_first_ccb)
+            {
+                ci.status = HCI_SUCCESS;
+                memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR));
+
+                for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+                {
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci);
+                }
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_adjust_allocation
+**
+** Description      This function is called when a link is created or removed
+**                  to calculate the amount of packets each link may send to
+**                  the HCI without an ack coming back.
+**
+**                  Currently, this is a simple allocation, dividing the
+**                  number of Controller Packets by the number of links. In
+**                  the future, QOS configuration should be examined.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_adjust_allocation (void)
+{
+    UINT16      qq, yy, qq_remainder;
+    tL2C_LCB    *p_lcb;
+    UINT16      hi_quota, low_quota;
+    UINT16      num_lowpri_links = 0;
+    UINT16      num_hipri_links  = 0;
+    UINT16      controller_xmit_quota = l2cb.num_lm_acl_bufs;
+    UINT16      high_pri_link_quota = L2CAP_HIGH_PRI_MIN_XMIT_QUOTA_A;
+
+    /* If no links active, nothing to do. */
+    if (l2cb.num_links_active == 0)
+    {
+        l2cb.controller_xmit_window = l2cb.num_lm_acl_bufs;
+        l2cb.round_robin_quota = l2cb.round_robin_unacked = 0;
+        return;
+    }
+
+    /* First, count the links */
+    for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++)
+    {
+        if (p_lcb->in_use)
+        {
+            if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH)
+                num_hipri_links++;
+            else
+                num_lowpri_links++;
+        }
+    }
+
+    /* now adjust high priority link quota */
+    low_quota = num_lowpri_links ? 1 : 0;
+    while ( (num_hipri_links * high_pri_link_quota + low_quota) > controller_xmit_quota )
+        high_pri_link_quota--;
+
+    /* Work out the xmit quota and buffer quota high and low priorities */
+    hi_quota  = num_hipri_links * high_pri_link_quota;
+    low_quota = (hi_quota < controller_xmit_quota) ? controller_xmit_quota - hi_quota : 1;
+
+    /* Work out and save the HCI xmit quota for each low priority link */
+
+    /* If each low priority link cannot have at least one buffer */
+    if (num_lowpri_links > low_quota)
+    {
+        l2cb.round_robin_quota = low_quota;
+        qq = qq_remainder = 0;
+    }
+    /* If each low priority link can have at least one buffer */
+    else if (num_lowpri_links > 0)
+    {
+        l2cb.round_robin_quota = 0;
+        l2cb.round_robin_unacked = 0;
+        qq = low_quota / num_lowpri_links;
+        qq_remainder = low_quota % num_lowpri_links;
+    }
+    /* If no low priority link */
+    else
+    {
+        l2cb.round_robin_quota = 0;
+        l2cb.round_robin_unacked = 0;
+        qq = qq_remainder = 0;
+    }
+
+    L2CAP_TRACE_EVENT5 ("l2c_link_adjust_allocation  num_hipri: %u  num_lowpri: %u  low_quota: %u  round_robin_quota: %u  qq: %u",
+                        num_hipri_links, num_lowpri_links, low_quota,
+                        l2cb.round_robin_quota, qq);
+
+    /* Now, assign the quotas to each link */
+    for (yy = 0, p_lcb = &l2cb.lcb_pool[0]; yy < MAX_L2CAP_LINKS; yy++, p_lcb++)
+    {
+        if (p_lcb->in_use)
+        {
+            if (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH)
+            {
+                p_lcb->link_xmit_quota   = high_pri_link_quota;
+            }
+            else
+            {
+                /* Safety check in case we switched to round-robin with something outstanding */
+                /* if sent_not_acked is added into round_robin_unacked then don't add it again */
+                /* l2cap keeps updating sent_not_acked for exiting from round robin */
+                if (( p_lcb->link_xmit_quota > 0 )&&( qq == 0 ))
+                    l2cb.round_robin_unacked += p_lcb->sent_not_acked;
+
+                p_lcb->link_xmit_quota   = qq;
+                if (qq_remainder > 0)
+                {
+                    p_lcb->link_xmit_quota++;
+                    qq_remainder--;
+                }
+            }
+
+#if L2CAP_HOST_FLOW_CTRL
+            p_lcb->link_ack_thresh = L2CAP_HOST_FC_ACL_BUFS / l2cb.num_links_active;
+#endif
+            L2CAP_TRACE_EVENT3 ("l2c_link_adjust_allocation LCB %d   Priority: %d  XmitQuota: %d",
+                                yy, p_lcb->acl_priority, p_lcb->link_xmit_quota);
+
+            L2CAP_TRACE_EVENT2 ("        SentNotAcked: %d  RRUnacked: %d",
+                                p_lcb->sent_not_acked, l2cb.round_robin_unacked);
+
+            /* There is a special case where we have readjusted the link quotas and  */
+            /* this link may have sent anything but some other link sent packets so  */
+            /* so we may need a timer to kick off this link's transmissions.         */
+            if ( (p_lcb->link_state == LST_CONNECTED)
+              && (p_lcb->link_xmit_data_q.count)
+              && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota) )
+                btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_FLOW_CONTROL_TOUT);
+        }
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_adjust_chnl_allocation
+**
+** Description      This function is called to calculate the amount of packets each
+**                  non-F&EC channel may have outstanding.
+**
+**                  Currently, this is a simple allocation, dividing the number
+**                  of packets allocated to the link by the number of channels. In
+**                  the future, QOS configuration should be examined.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_adjust_chnl_allocation (void)
+{
+    tL2C_CCB    *p_ccb;
+    UINT8       xx;
+
+    UINT16      weighted_chnls[GKI_NUM_TOTAL_BUF_POOLS];
+    UINT16      quota_per_weighted_chnls[GKI_NUM_TOTAL_BUF_POOLS];
+    UINT16      reserved_buff[GKI_NUM_TOTAL_BUF_POOLS];
+
+    L2CAP_TRACE_DEBUG0 ("l2c_link_adjust_chnl_allocation");
+
+    /* initialize variables */
+    for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++ )
+    {
+        weighted_chnls[xx] = 0;
+        reserved_buff[xx] = 0;
+    }
+
+    /* add up all of tx and rx data rate requirement */
+    /* channel required higher data rate will get more buffer quota */
+    for (xx = 0; xx < MAX_L2CAP_CHANNELS; xx++)
+    {
+        p_ccb = l2cb.ccb_pool + xx;
+
+        if (!p_ccb->in_use)
+            continue;
+
+        if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            weighted_chnls[p_ccb->ertm_info.user_tx_pool_id] += p_ccb->tx_data_rate;
+            weighted_chnls[p_ccb->ertm_info.user_rx_pool_id] += p_ccb->rx_data_rate;
+
+            if (p_ccb->ertm_info.fcr_tx_pool_id == HCI_ACL_POOL_ID)
+            {
+                /* reserve buffers only for wait_for_ack_q to maximize throughput */
+                /* retrans_q will work based on buffer status */
+                reserved_buff[HCI_ACL_POOL_ID] += p_ccb->peer_cfg.fcr.tx_win_sz;
+            }
+
+            if (p_ccb->ertm_info.fcr_rx_pool_id == HCI_ACL_POOL_ID)
+            {
+                /* reserve buffers for srej_rcv_hold_q */
+                reserved_buff[HCI_ACL_POOL_ID] += p_ccb->peer_cfg.fcr.tx_win_sz;
+            }
+        }
+        else
+        {
+            /* low data rate is 1, medium is 2, high is 3 and no traffic is 0 */
+            weighted_chnls[HCI_ACL_POOL_ID] += p_ccb->tx_data_rate + p_ccb->rx_data_rate;
+        }
+    }
+
+
+    /* get unit quota per pool */
+    for (xx = 0; xx < GKI_NUM_TOTAL_BUF_POOLS; xx++ )
+    {
+        if ( weighted_chnls[xx] > 0 )
+        {
+            if (GKI_poolcount(xx) > reserved_buff[xx])
+                quota_per_weighted_chnls[xx] = ((GKI_poolcount(xx) - reserved_buff[xx])/weighted_chnls[xx]) + 1;
+            else
+                quota_per_weighted_chnls[xx] = 1;
+
+            L2CAP_TRACE_DEBUG5 ("POOL ID:%d, GKI_poolcount = %d, reserved_buff = %d, weighted_chnls = %d, quota_per_weighted_chnls = %d",
+                                 xx, GKI_poolcount(xx), reserved_buff[xx], weighted_chnls[xx], quota_per_weighted_chnls[xx] );
+        }
+        else
+            quota_per_weighted_chnls[xx] = 0;
+    }
+
+
+    /* assign buffer quota to each channel based on its data rate requirement */
+    for (xx = 0; xx < MAX_L2CAP_CHANNELS; xx++)
+    {
+        p_ccb = l2cb.ccb_pool + xx;
+
+        if (!p_ccb->in_use)
+            continue;
+
+        if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            p_ccb->buff_quota = quota_per_weighted_chnls[p_ccb->ertm_info.user_tx_pool_id] * p_ccb->tx_data_rate;
+
+            L2CAP_TRACE_EVENT6 ("CID:0x%04x FCR Mode:%u UserTxPool:%u Priority:%u TxDataRate:%u Quota:%u",
+                                p_ccb->local_cid, p_ccb->peer_cfg.fcr.mode, p_ccb->ertm_info.user_tx_pool_id,
+                                p_ccb->ccb_priority, p_ccb->tx_data_rate, p_ccb->buff_quota);
+
+        }
+        else
+        {
+            p_ccb->buff_quota = quota_per_weighted_chnls[HCI_ACL_POOL_ID] * p_ccb->tx_data_rate;
+
+            L2CAP_TRACE_EVENT4 ("CID:0x%04x Priority:%u TxDataRate:%u Quota:%u",
+                                p_ccb->local_cid,
+                                p_ccb->ccb_priority, p_ccb->tx_data_rate, p_ccb->buff_quota);
+        }
+
+        /* quota may be change so check congestion */
+        l2cu_check_channel_congestion (p_ccb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_processs_num_bufs
+**
+** Description      This function is called when a "controller buffer size"
+**                  event is first received from the controller. It updates
+**                  the L2CAP values.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_processs_num_bufs (UINT16 num_lm_acl_bufs)
+{
+    l2cb.num_lm_acl_bufs = l2cb.controller_xmit_window = num_lm_acl_bufs;
+
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_pkts_rcvd
+**
+** Description      This function is called from the HCI transport when it is time
+**                  tto send a "Host ready for packets" command. This is only when
+**                  host to controller flow control is used. If fills in the arrays
+**                  of numbers of packets and handles.
+**
+** Returns          count of number of entries filled in
+**
+*******************************************************************************/
+UINT8 l2c_link_pkts_rcvd (UINT16 *num_pkts, UINT16 *handles)
+{
+    UINT8       num_found = 0;
+
+#if (L2CAP_HOST_FLOW_CTRL == TRUE)
+
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->link_pkts_unacked))
+        {
+            num_pkts[num_found] = p_lcb->link_pkts_unacked;
+            handles[num_found]  = p_lcb->handle;
+            p_lcb->link_pkts_unacked = 0;
+            num_found++;
+        }
+    }
+
+#endif
+
+    return (num_found);
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_role_changed
+**
+** Description      This function is called whan a link's master/slave role change
+**                  event is received. It simply updates the link control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_role_changed (BD_ADDR bd_addr, UINT8 new_role, UINT8 hci_status)
+{
+    tL2C_LCB *p_lcb;
+    int      xx;
+
+    /* Make sure not called from HCI Command Status (bd_addr and new_role are invalid) */
+    if (bd_addr)
+    {
+        /* If here came form hci role change event */
+        p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr);
+        if (p_lcb)
+        {
+            p_lcb->link_role = new_role;
+
+            /* Reset high priority link if needed */
+            if (hci_status == HCI_SUCCESS)
+                l2cu_set_acl_priority(bd_addr, p_lcb->acl_priority, TRUE);
+        }
+    }
+
+    /* Check if any LCB was waiting for switch to be completed */
+    for (xx = 0, p_lcb = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->link_state == LST_CONNECTING_WAIT_SWITCH))
+        {
+            l2cu_create_conn_after_switch (p_lcb);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_pin_code_request
+**
+** Description      This function is called whan a pin-code request is received
+**                  on a connection. If there are no channels active yet on the
+**                  link, it extends the link first connection timer.  Make sure
+**                  that inactivity timer is not extended if PIN code happens
+**                  to be after last ccb released.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_pin_code_request (BD_ADDR bd_addr)
+{
+    tL2C_LCB *p_lcb = l2cu_find_lcb_by_bd_addr (bd_addr);
+
+    if ( (p_lcb) && (!p_lcb->ccb_queue.p_first_ccb) )
+    {
+        btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_CONNECT_TOUT_EXT);
+    }
+}
+
+#if ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE)
+/*******************************************************************************
+**
+** Function         l2c_link_check_power_mode
+**
+** Description      This function is called to check power mode.
+**
+** Returns          TRUE if link is going to be active from park
+**                  FALSE if nothing to send or not in park mode
+**
+*******************************************************************************/
+BOOLEAN l2c_link_check_power_mode (tL2C_LCB *p_lcb)
+{
+    tBTM_PM_MODE     mode;
+    tBTM_PM_PWR_MD   pm;
+    tL2C_CCB    *p_ccb;
+    BOOLEAN need_to_active = FALSE;
+
+    /*
+     * We only switch park to active only if we have unsent packets
+     */
+    if ( p_lcb->link_xmit_data_q.count == 0 )
+    {
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+        {
+            if (p_ccb->xmit_hold_q.count != 0)
+            {
+                need_to_active = TRUE;
+                break;
+            }
+        }
+    }
+    else
+        need_to_active = TRUE;
+
+    /* if we have packets to send */
+    if ( need_to_active )
+    {
+        /* check power mode */
+        if (BTM_ReadPowerMode(p_lcb->remote_bd_addr, &mode) == BTM_SUCCESS)
+        {
+            /*
+            if ( mode == BTM_PM_MD_PARK )
+            {
+                L2CAP_TRACE_DEBUG1 ("LCB(0x%x) is in park mode", p_lcb->handle);
+// Coverity:
+// FALSE-POSITIVE error from Coverity test tool. Please do NOT remove following comment.
+// coverity[uninit_use_in_call] False-positive: setting the mode to BTM_PM_MD_ACTIVE only uses settings.mode
+                                the other data members of tBTM_PM_PWR_MD are ignored
+
+                memset((void*)&pm, 0, sizeof(pm));
+                pm.mode = BTM_PM_MD_ACTIVE;
+                BTM_SetPowerMode(BTM_PM_SET_ONLY_ID, p_lcb->remote_bd_addr, &pm);
+                btu_start_timer (&p_lcb->timer_entry,
+                                 BTU_TTYPE_L2CAP_LINK, L2CAP_WAIT_UNPARK_TOUT);
+                return TRUE;
+            }
+            */
+            if ( mode == BTM_PM_STS_PENDING )
+            {
+                L2CAP_TRACE_DEBUG1 ("LCB(0x%x) is in PM pending state", p_lcb->handle);
+
+                btu_start_timer (&p_lcb->timer_entry,
+                                 BTU_TTYPE_L2CAP_LINK, L2CAP_WAIT_UNPARK_TOUT);
+                return TRUE;
+            }
+        }
+    }
+    return FALSE;
+}
+#endif /* ((BTM_PWR_MGR_INCLUDED == TRUE) && L2CAP_WAKE_PARKED_LINK == TRUE) */
+
+/*******************************************************************************
+**
+** Function         l2c_link_check_send_pkts
+**
+** Description      This function is called to check if it can send packets
+**                  to the Host Controller. It may be passed the address of
+**                  a packet to send.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_check_send_pkts (tL2C_LCB *p_lcb, tL2C_CCB *p_ccb, BT_HDR *p_buf)
+{
+    int         xx;
+    BOOLEAN     single_write = FALSE;
+
+    /* Save the channel ID for faster counting */
+    if (p_buf)
+    {
+        if (p_ccb != NULL)
+        {
+            p_buf->event = p_ccb->local_cid;
+            single_write = TRUE;
+        }
+        else
+            p_buf->event = 0;
+
+        p_buf->layer_specific = 0;
+        GKI_enqueue (&p_lcb->link_xmit_data_q, p_buf);
+
+        if (p_lcb->link_xmit_quota == 0)
+            l2cb.check_round_robin = TRUE;
+    }
+
+    /* If this is called from uncongested callback context break recursive calling.
+    ** This LCB will be served when receiving number of completed packet event.
+    */
+    if (l2cb.is_cong_cback_context)
+        return;
+
+    /* If we are in a scenario where there are not enough buffers for each link to
+    ** have at least 1, then do a round-robin for all the LCBs
+    */
+    if ( (p_lcb == NULL) || (p_lcb->link_xmit_quota == 0) )
+    {
+        if (p_lcb == NULL)
+            p_lcb = l2cb.lcb_pool;
+        else if (!single_write)
+            p_lcb++;
+
+        /* Loop through, starting at the next */
+        for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+        {
+            /* If controller window is full, nothing to do */
+            if ( (l2cb.controller_xmit_window == 0
+#if (BLE_INCLUDED == TRUE)
+                  && !p_lcb->is_ble_link
+#endif
+                )
+#if (BLE_INCLUDED == TRUE)
+                || (p_lcb->is_ble_link && l2cb.controller_le_xmit_window == 0 )
+#endif
+              || (l2cb.round_robin_unacked >= l2cb.round_robin_quota) )
+                break;
+
+            /* Check for wraparound */
+            if (p_lcb == &l2cb.lcb_pool[MAX_L2CAP_LINKS])
+                p_lcb = &l2cb.lcb_pool[0];
+
+            if ( (!p_lcb->in_use)
+               || (p_lcb->partial_segment_being_sent)
+               || (p_lcb->link_state != LST_CONNECTED)
+               || (p_lcb->link_xmit_quota != 0)
+               || (L2C_LINK_CHECK_POWER_MODE (p_lcb)) )
+                continue;
+
+            /* See if we can send anything from the Link Queue */
+            if ((p_buf = (BT_HDR *)GKI_dequeue (&p_lcb->link_xmit_data_q)) != NULL)
+            {
+                l2c_link_send_to_lower (p_lcb, p_buf);
+            }
+            else if (single_write)
+            {
+                /* If only doing one write, break out */
+                break;
+            }
+            /* If nothing on the link queue, check the channel queue */
+            else if ((p_buf = l2cu_get_next_buffer_to_send (p_lcb)) != NULL)
+            {
+                l2c_link_send_to_lower (p_lcb, p_buf);
+            }
+        }
+
+        /* If we finished without using up our quota, no need for a safety check */
+#if (BLE_INCLUDED == TRUE)
+        if ( ((l2cb.controller_xmit_window > 0 && !p_lcb->is_ble_link) ||
+             (l2cb.controller_le_xmit_window > 0 && p_lcb->is_ble_link))
+          && (l2cb.round_robin_unacked < l2cb.round_robin_quota) )
+#else
+        if ( (l2cb.controller_xmit_window > 0)
+          && (l2cb.round_robin_unacked < l2cb.round_robin_quota) )
+
+#endif
+            l2cb.check_round_robin = FALSE;
+    }
+    else /* if this is not round-robin service */
+    {
+        /* If a partial segment is being sent, can't send anything else */
+        if ( (p_lcb->partial_segment_being_sent)
+          || (p_lcb->link_state != LST_CONNECTED)
+          || (L2C_LINK_CHECK_POWER_MODE (p_lcb)) )
+            return;
+
+        /* See if we can send anything from the link queue */
+#if (BLE_INCLUDED == TRUE)
+        while ( ((l2cb.controller_xmit_window != 0 && !p_lcb->is_ble_link) ||
+                 (l2cb.controller_le_xmit_window != 0 && p_lcb->is_ble_link))
+             && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota))
+#else
+        while ( (l2cb.controller_xmit_window != 0)
+             && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota))
+#endif
+        {
+            if ((p_buf = (BT_HDR *)GKI_dequeue (&p_lcb->link_xmit_data_q)) == NULL)
+                break;
+
+            if (!l2c_link_send_to_lower (p_lcb, p_buf))
+                break;
+        }
+
+        if (!single_write)
+        {
+            /* See if we can send anything for any channel */
+#if (BLE_INCLUDED == TRUE)
+            while ( ((l2cb.controller_xmit_window != 0 && !p_lcb->is_ble_link) ||
+                    (l2cb.controller_le_xmit_window != 0 && p_lcb->is_ble_link))
+                    && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota))
+#else
+            while ((l2cb.controller_xmit_window != 0) && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota))
+#endif
+            {
+                if ((p_buf = l2cu_get_next_buffer_to_send (p_lcb)) == NULL)
+                    break;
+
+                if (!l2c_link_send_to_lower (p_lcb, p_buf))
+                    break;
+            }
+        }
+
+        /* There is a special case where we have readjusted the link quotas and  */
+        /* this link may have sent anything but some other link sent packets so  */
+        /* so we may need a timer to kick off this link's transmissions.         */
+        if ( (p_lcb->link_xmit_data_q.count) && (p_lcb->sent_not_acked < p_lcb->link_xmit_quota) )
+            btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_FLOW_CONTROL_TOUT);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_send_to_lower
+**
+** Description      This function queues the buffer for HCI transmission
+**
+** Returns          TRUE for success, FALSE for fail
+**
+*******************************************************************************/
+static BOOLEAN l2c_link_send_to_lower (tL2C_LCB *p_lcb, BT_HDR *p_buf)
+{
+    UINT16      num_segs;
+    UINT16      xmit_window, acl_data_size;
+
+#if (BLE_INCLUDED == TRUE)
+    if ((!p_lcb->is_ble_link && (p_buf->len <= btu_cb.hcit_acl_pkt_size)) ||
+        (p_lcb->is_ble_link && (p_buf->len <= btu_cb.hcit_ble_acl_pkt_size)))
+#else
+    if (p_buf->len <= btu_cb.hcit_acl_pkt_size)
+#endif
+    {
+        if (p_lcb->link_xmit_quota == 0)
+            l2cb.round_robin_unacked++;
+
+        p_lcb->sent_not_acked++;
+        p_buf->layer_specific = 0;
+
+#if (BLE_INCLUDED == TRUE)
+        if (p_lcb->is_ble_link)
+        {
+            l2cb.controller_le_xmit_window--;
+            L2C_LINK_SEND_BLE_ACL_DATA (p_buf);
+        }
+        else
+#endif
+        {
+            l2cb.controller_xmit_window--;
+            L2C_LINK_SEND_ACL_DATA (p_buf);
+        }
+    }
+    else
+    {
+#if BLE_INCLUDED == TRUE
+        if (p_lcb->is_ble_link)
+        {
+            acl_data_size = btu_cb.hcit_ble_acl_data_size;
+            xmit_window = l2cb.controller_le_xmit_window;
+
+        }
+        else
+#endif
+        {
+            acl_data_size = btu_cb.hcit_acl_data_size;
+            xmit_window = l2cb.controller_xmit_window;
+        }
+        num_segs = (p_buf->len - HCI_DATA_PREAMBLE_SIZE + acl_data_size - 1) / acl_data_size;
+
+
+        /* If doing round-robin, then only 1 segment each time */
+        if (p_lcb->link_xmit_quota == 0)
+        {
+            num_segs = 1;
+            p_lcb->partial_segment_being_sent = TRUE;
+        }
+        else
+        {
+            /* Multi-segment packet. Make sure it can fit */
+            if (num_segs > xmit_window)
+            {
+                num_segs = xmit_window;
+                p_lcb->partial_segment_being_sent = TRUE;
+            }
+
+            if (num_segs > (p_lcb->link_xmit_quota - p_lcb->sent_not_acked))
+            {
+                num_segs = (p_lcb->link_xmit_quota - p_lcb->sent_not_acked);
+                p_lcb->partial_segment_being_sent = TRUE;
+            }
+        }
+
+        p_buf->layer_specific        = num_segs;
+#if BLE_INCLUDED == TRUE
+        if (p_lcb->is_ble_link)
+        {
+            l2cb.controller_le_xmit_window -= num_segs;
+
+        }
+        else
+#endif
+        l2cb.controller_xmit_window -= num_segs;
+
+        if (p_lcb->link_xmit_quota == 0)
+            l2cb.round_robin_unacked += num_segs;
+
+        p_lcb->sent_not_acked += num_segs;
+#if BLE_INCLUDED == TRUE
+        if (p_lcb->is_ble_link)
+        {
+            L2C_LINK_SEND_BLE_ACL_DATA(p_buf);
+        }
+        else
+#endif
+        {
+            L2C_LINK_SEND_ACL_DATA (p_buf);
+        }
+    }
+
+#if (L2CAP_HCI_FLOW_CONTROL_DEBUG == TRUE)
+#if (BLE_INCLUDED == TRUE)
+    if (p_lcb->is_ble_link)
+    {
+        L2CAP_TRACE_DEBUG6 ("TotalWin=%d,Hndl=0x%x,Quota=%d,Unack=%d,RRQuota=%d,RRUnack=%d",
+                l2cb.controller_le_xmit_window,
+                p_lcb->handle,
+                p_lcb->link_xmit_quota, p_lcb->sent_not_acked,
+                l2cb.round_robin_quota, l2cb.round_robin_unacked);
+    }
+    else
+#endif
+    {
+        L2CAP_TRACE_DEBUG6 ("TotalWin=%d,Hndl=0x%x,Quota=%d,Unack=%d,RRQuota=%d,RRUnack=%d",
+                l2cb.controller_xmit_window,
+                p_lcb->handle,
+                p_lcb->link_xmit_quota, p_lcb->sent_not_acked,
+                l2cb.round_robin_quota, l2cb.round_robin_unacked);
+    }
+#endif
+
+    return TRUE;
+}
+
+/*******************************************************************************
+**
+** Function         l2c_link_process_num_completed_pkts
+**
+** Description      This function is called when a "number-of-completed-packets"
+**                  event is received from the controller. It updates all the
+**                  LCB transmit counts.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_process_num_completed_pkts (UINT8 *p)
+{
+    UINT8       num_handles, xx;
+    UINT16      handle;
+    UINT16      num_sent;
+    tL2C_LCB    *p_lcb;
+
+    STREAM_TO_UINT8 (num_handles, p);
+
+    for (xx = 0; xx < num_handles; xx++)
+    {
+        STREAM_TO_UINT16 (handle, p);
+        STREAM_TO_UINT16 (num_sent, p);
+
+        p_lcb = l2cu_find_lcb_by_handle (handle);
+
+        /* Callback for number of completed packet event    */
+        /* Originally designed for [3DSG]                   */
+        if((p_lcb != NULL) && (p_lcb->p_nocp_cb))
+        {
+            L2CAP_TRACE_DEBUG0 ("L2CAP - calling NoCP callback");
+            (*p_lcb->p_nocp_cb)(p_lcb->remote_bd_addr);
+        }
+
+#if (BLE_INCLUDED == TRUE)
+        if (p_lcb && p_lcb->is_ble_link)
+            l2cb.controller_le_xmit_window += num_sent;
+        else
+#endif
+        {
+
+            /* Maintain the total window to the controller */
+            l2cb.controller_xmit_window += num_sent;
+        }
+
+        if (p_lcb)
+        {
+            /* If doing round-robin, adjust communal counts */
+            if (p_lcb->link_xmit_quota == 0)
+            {
+                /* Don't go negative */
+                if (l2cb.round_robin_unacked > num_sent)
+                    l2cb.round_robin_unacked -= num_sent;
+                else
+                    l2cb.round_robin_unacked = 0;
+            }
+
+            /* Don't go negative */
+            if (p_lcb->sent_not_acked > num_sent)
+                p_lcb->sent_not_acked -= num_sent;
+            else
+                p_lcb->sent_not_acked = 0;
+
+            l2c_link_check_send_pkts (p_lcb, NULL, NULL);
+
+            /* If we were doing round-robin for low priority links, check 'em */
+            if ( (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH)
+              && (l2cb.check_round_robin)
+              && (l2cb.round_robin_unacked < l2cb.round_robin_quota) )
+            {
+              l2c_link_check_send_pkts (NULL, NULL, NULL);
+            }
+        }
+
+#if (L2CAP_HCI_FLOW_CONTROL_DEBUG == TRUE)
+        if (p_lcb)
+        {
+#if (BLE_INCLUDED == TRUE)
+            if (p_lcb->is_ble_link)
+            {
+                L2CAP_TRACE_DEBUG5 ("TotalWin=%d,LinkUnack(0x%x)=%d,RRCheck=%d,RRUnack=%d",
+                    l2cb.controller_le_xmit_window,
+                    p_lcb->handle, p_lcb->sent_not_acked,
+                    l2cb.check_round_robin, l2cb.round_robin_unacked);
+            }
+            else
+#endif
+            {
+                L2CAP_TRACE_DEBUG5 ("TotalWin=%d,LinkUnack(0x%x)=%d,RRCheck=%d,RRUnack=%d",
+                    l2cb.controller_xmit_window,
+                    p_lcb->handle, p_lcb->sent_not_acked,
+                    l2cb.check_round_robin, l2cb.round_robin_unacked);
+
+            }
+        }
+        else
+        {
+#if (BLE_INCLUDED == TRUE)
+            L2CAP_TRACE_DEBUG5 ("TotalWin=%d  LE_Win: %d, Handle=0x%x, RRCheck=%d, RRUnack=%d",
+                l2cb.controller_xmit_window,
+                l2cb.controller_le_xmit_window,
+                handle,
+                l2cb.check_round_robin, l2cb.round_robin_unacked);
+#else
+            L2CAP_TRACE_DEBUG4 ("TotalWin=%d  Handle=0x%x  RRCheck=%d  RRUnack=%d",
+                l2cb.controller_xmit_window,
+                handle,
+                l2cb.check_round_robin, l2cb.round_robin_unacked);
+#endif
+        }
+#endif
+    }
+
+#if (defined(HCILP_INCLUDED) && HCILP_INCLUDED == TRUE)
+    /* only full stack can enable sleep mode */
+    btu_check_bt_sleep ();
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         l2cap_link_chk_pkt_start
+**
+** Description      This function is called from the HCI transport when the first
+**                  4 bytes of an HCI ACL packet have been received. It checks if the
+**                  packet is the next segment of a fragmented L2CAP message. If it
+**                  is, and the length is OK, it returns the address of the
+**                  starting L2CAP message segment buffer.
+**
+** Returns          the address of the receive buffer HCIT should use
+**                  (CR419: Modified to return NULL in case of error.)
+**
+** NOTE             This assumes that the L2CAP MTU size is less than the size
+**                  of an HCI ACL buffer, so the maximum L2CAP message will fit
+**                  into one buffer.
+**
+*******************************************************************************/
+BT_HDR *l2cap_link_chk_pkt_start (BT_HDR *p_cur_buf)
+{
+    UINT8       *p;
+    UINT16      handle;
+    UINT16      hci_len;
+    UINT16      pkt_type;
+    tL2C_LCB    *p_lcb;
+    BT_HDR *	p_return_buf;       /* CR419: To avoid returning from too many places */
+
+
+    if (p_cur_buf)
+    {
+        p = (UINT8 *)(p_cur_buf + 1) + p_cur_buf->offset;
+    }
+    else
+    {
+        return (NULL);
+    }
+
+    /* L2CAP expects all rcvd packets to have a layer-specific value of 0 */
+    p_cur_buf->layer_specific = 0;
+
+    STREAM_TO_UINT16 (handle, p);
+    STREAM_TO_UINT16 (hci_len, p);
+
+    pkt_type = HCID_GET_EVENT (handle);
+    handle   = HCID_GET_HANDLE (handle);
+
+    l2cb.p_cur_hcit_lcb = NULL;
+
+    /* Find the link that is associated with this handle */
+    p_lcb = l2cu_find_lcb_by_handle (handle);
+
+    /* If no link for this handle, nothing to do. */
+    if (!p_lcb)
+        return (p_cur_buf) ;
+
+    if (pkt_type == L2CAP_PKT_START)            /*** START PACKET ***/
+    {
+        /* Start of packet. If we were in the middle of receiving */
+        /* a packet, it is incomplete. Drop it.                   */
+        if (p_lcb->p_hcit_rcv_acl)
+        {
+            L2CAP_TRACE_WARNING0 ("L2CAP - dropping incomplete pkt");
+            GKI_freebuf (p_lcb->p_hcit_rcv_acl);
+            p_lcb->p_hcit_rcv_acl = NULL;
+        }
+
+        /* Save the active buffer address in the LCB  */
+        if ((p_return_buf = p_cur_buf) != NULL)
+        {
+            p_lcb->p_hcit_rcv_acl = p_return_buf;
+            l2cb.p_cur_hcit_lcb   = p_lcb;
+        }
+    }
+    else                                        /*** CONTINUATION PACKET ***/
+    {
+        /* Packet continuation. Check if we were expecting it */
+        if (p_lcb->p_hcit_rcv_acl)
+        {
+            UINT16  total_len;
+            BT_HDR  *p_base_buf = p_lcb->p_hcit_rcv_acl;
+            UINT8   *p_f        = (UINT8 *)(p_base_buf + 1) + p_base_buf->offset + 2;
+
+            STREAM_TO_UINT16 (total_len, p_f);
+
+            /* We were expecting the CONTINUATION packet. If length fits, it can go in the  */
+            /* current buffer.                                                              */
+            if ((total_len + hci_len) <= (L2CAP_MTU_SIZE + HCI_DATA_PREAMBLE_SIZE))
+            {
+                /* GKI_freebuf (p_cur_buf); CR419:Do not free it yet */
+                p_return_buf        = p_lcb->p_hcit_rcv_acl;	/* CR419: return base buffer */
+                l2cb.p_cur_hcit_lcb = p_lcb;
+
+                if ((p_cur_buf->len > HCI_DATA_PREAMBLE_SIZE))
+                {
+                    UINT8 *	p		= (UINT8 *)(p_cur_buf + 1)
+                                                + p_cur_buf->offset
+                                                + HCI_DATA_PREAMBLE_SIZE;
+                    UINT8 *	p1		= (UINT8 *)(p_return_buf + 1)
+                                                + p_return_buf->offset
+                                                + p_return_buf->len;
+
+                    /* Copy data from new buffer into base buffer then update the data  */
+                    /* count in the base buffer accordingly.                            */
+                    memcpy (p1, p, p_cur_buf->len - HCI_DATA_PREAMBLE_SIZE);
+                    p_return_buf->len   += (p_cur_buf->len - HCI_DATA_PREAMBLE_SIZE);
+                }
+
+                GKI_freebuf (p_cur_buf);
+                p_cur_buf = NULL;
+
+                /* Update HCI header of first segment (base buffer) with new length */
+                total_len += hci_len;
+                p_f        = (UINT8 *)(p_base_buf + 1) + p_base_buf->offset + 2;
+                UINT16_TO_STREAM (p_f, total_len);
+            }
+            else
+            {
+                /* Packet too long. Drop the base packet */
+                L2CAP_TRACE_WARNING3 ("L2CAP - dropping too long pkt BufLen: %d  total_len: %d  hci_len: %d",
+                                      p_lcb->p_hcit_rcv_acl->len, total_len, hci_len);
+
+                GKI_freebuf (p_lcb->p_hcit_rcv_acl);
+                p_lcb->p_hcit_rcv_acl = NULL;
+                p_return_buf          = NULL ; /* Can't hold onto it any more */
+            }
+        }
+        else                                    /*** NEITHER START OR CONTINUATION PACKET ***/
+        {
+            p_return_buf = NULL ;
+        }
+    }
+
+    if (p_return_buf == NULL)                   /* if error is indicated..  */
+    {
+        if (p_cur_buf != NULL)                  /* ..drop input buffer      */
+            GKI_freebuf(p_cur_buf);             /*     (if present)         */
+    }
+
+    return (p_return_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cap_link_chk_pkt_end
+**
+** Description      This function is called from the HCI transport when the last
+**                  byte of an HCI ACL packet has been received. It checks if the
+**                  L2CAP message is complete, i.e. no more continuation packets
+**                  are expected.
+**
+** Returns          TRUE if message complete, FALSE if continuation expected
+**
+*******************************************************************************/
+BOOLEAN l2cap_link_chk_pkt_end (void)
+{
+    UINT8       *p;
+    BT_HDR      *p_buf;
+    UINT16      l2cap_len;
+    tL2C_LCB    *p_lcb;
+
+    /* If link or buffer pointer not set up, let main line handle it */
+    if (((p_lcb = l2cb.p_cur_hcit_lcb) == NULL) || ((p_buf = p_lcb->p_hcit_rcv_acl) == NULL))
+        return (TRUE);
+
+    /* Point to the L2CAP length */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset + HCI_DATA_PREAMBLE_SIZE;
+
+    STREAM_TO_UINT16 (l2cap_len, p);
+
+    /* If the L2CAP length has not been reached, tell HCIT not to send this buffer to BTU */
+    if (l2cap_len > (p_buf->len - (HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD)))
+    {
+        return (FALSE);
+    }
+    else
+    {
+        p_lcb->p_hcit_rcv_acl = NULL;
+        return (TRUE);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_link_segments_xmitted
+**
+** Description      This function is called from the HCI Interface when an ACL
+**                  data packet segment is transmitted.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_link_segments_xmitted (BT_HDR *p_msg)
+{
+    UINT8       *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
+    UINT16      handle;
+    tL2C_LCB    *p_lcb;
+
+    /* Extract the handle */
+    STREAM_TO_UINT16 (handle, p);
+    handle   = HCID_GET_HANDLE (handle);
+
+    /* Find the LCB based on the handle */
+    if ((p_lcb = l2cu_find_lcb_by_handle (handle)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - rcvd segment complete, unknown handle: %d", handle);
+        GKI_freebuf (p_msg);
+        return;
+    }
+
+    if (p_lcb->link_state == LST_CONNECTED)
+    {
+        /* Enqueue the buffer to the head of the transmit queue, and see */
+        /* if we can transmit anything more.                             */
+        GKI_enqueue_head (&p_lcb->link_xmit_data_q, p_msg);
+
+        p_lcb->partial_segment_being_sent = FALSE;
+
+        l2c_link_check_send_pkts (p_lcb, NULL, NULL);
+    }
+    else
+        GKI_freebuf (p_msg);
+}
diff --git a/stack/l2cap/l2c_main.c b/stack/l2cap/l2c_main.c
new file mode 100644
index 0000000..6c29cff
--- /dev/null
+++ b/stack/l2cap/l2c_main.c
@@ -0,0 +1,991 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the main L2CAP entry points
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "l2c_api.h"
+#include "btu.h"
+#include "btm_int.h"
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void process_l2cap_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len);
+
+/********************************************************************************/
+/*                 G L O B A L      L 2 C A P       D A T A                     */
+/********************************************************************************/
+#if L2C_DYNAMIC_MEMORY == FALSE
+tL2C_CB l2cb;
+#endif
+
+/* Temporary - until l2cap implements group management */
+#if (TCS_BCST_SETUP_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
+extern void tcs_proc_bcst_msg( BD_ADDR addr, BT_HDR *p_msg ) ;
+
+/*******************************************************************************
+**
+** Function         l2c_bcst_msg
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_bcst_msg( BT_HDR *p_buf, UINT16 psm )
+{
+    UINT8       *p;
+
+    /* Ensure we have enough space in the buffer for the L2CAP and HCI headers */
+    if (p_buf->offset < L2CAP_BCST_MIN_OFFSET)
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - cannot send buffer, offset: %d", p_buf->offset);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    /* Step back some bytes to add the headers */
+    p_buf->offset -= (HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_BCST_OVERHEAD);
+    p_buf->len    += L2CAP_PKT_OVERHEAD + L2CAP_BCST_OVERHEAD;
+
+    /* Set the pointer to the beginning of the data */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* First, the HCI transport header */
+    UINT16_TO_STREAM (p, 0x0050 | (L2CAP_PKT_START << 12) | (2 << 14));
+
+    /* The HCI transport will segment the buffers. */
+    if (p_buf->len > btu_cb.hcit_acl_data_size)
+    {
+        UINT16_TO_STREAM (p, btu_cb.hcit_acl_data_size);
+    }
+    else
+    {
+        UINT16_TO_STREAM (p, p_buf->len);
+    }
+
+    /* Now the L2CAP header */
+    UINT16_TO_STREAM (p, p_buf->len - L2CAP_PKT_OVERHEAD);
+    UINT16_TO_STREAM (p, L2CAP_CONNECTIONLESS_CID);
+    UINT16_TO_STREAM (p, psm);
+
+    p_buf->len += HCI_DATA_PREAMBLE_SIZE;
+
+    if (p_buf->len <= btu_cb.hcit_acl_pkt_size)
+    {
+        HCI_ACL_DATA_TO_LOWER (p_buf);
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         l2c_rcv_acl_data
+**
+** Description      This function is called from the HCI Interface when an ACL
+**                  data packet is received.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_rcv_acl_data (BT_HDR *p_msg)
+{
+    UINT8       *p = (UINT8 *)(p_msg + 1) + p_msg->offset;
+    UINT16      handle, hci_len;
+    UINT8       pkt_type;
+    tL2C_LCB    *p_lcb;
+    tL2C_CCB    *p_ccb = NULL;
+    UINT16      l2cap_len, rcv_cid, psm;
+
+    /* Extract the handle */
+    STREAM_TO_UINT16 (handle, p);
+    pkt_type = HCID_GET_EVENT (handle);
+    handle   = HCID_GET_HANDLE (handle);
+
+    /* Since the HCI Transport is putting segmented packets back together, we */
+    /* should never get a valid packet with the type set to "continuation"    */
+    if (pkt_type != L2CAP_PKT_CONTINUE)
+    {
+        /* Find the LCB based on the handle */
+        if ((p_lcb = l2cu_find_lcb_by_handle (handle)) == NULL)
+        {
+            UINT8       cmd_code;
+
+            /* There is a slight possibility (specifically with USB) that we get an */
+            /* L2CAP connection request before we get the HCI connection complete.  */
+            /* So for these types of messages, hold them for up to 2 seconds.       */
+            STREAM_TO_UINT16 (hci_len, p);
+            STREAM_TO_UINT16 (l2cap_len, p);
+            STREAM_TO_UINT16 (rcv_cid, p);
+            STREAM_TO_UINT8  (cmd_code, p);
+
+            if ((p_msg->layer_specific == 0) && (rcv_cid == L2CAP_SIGNALLING_CID)
+                && (cmd_code == L2CAP_CMD_INFO_REQ || cmd_code == L2CAP_CMD_CONN_REQ))
+            {
+                L2CAP_TRACE_WARNING5 ("L2CAP - holding ACL for unknown handle:%d ls:%d cid:%d opcode:%d cur count:%d",
+                                    handle, p_msg->layer_specific, rcv_cid, cmd_code,
+                                    l2cb.rcv_hold_q.count);
+                p_msg->layer_specific = 2;
+                GKI_enqueue (&l2cb.rcv_hold_q, p_msg);
+
+                if (l2cb.rcv_hold_q.count == 1)
+                    btu_start_timer (&l2cb.rcv_hold_tle, BTU_TTYPE_L2CAP_HOLD, BT_1SEC_TIMEOUT);
+
+                return;
+            }
+            else
+            {
+                L2CAP_TRACE_ERROR5 ("L2CAP - rcvd ACL for unknown handle:%d ls:%d cid:%d opcode:%d cur count:%d",
+                                    handle, p_msg->layer_specific, rcv_cid, cmd_code, l2cb.rcv_hold_q.count);
+            }
+            GKI_freebuf (p_msg);
+            return;
+        }
+    }
+    else
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - expected pkt start or complete, got: %d", pkt_type);
+        GKI_freebuf (p_msg);
+        return;
+    }
+
+    /* Extract the length and update the buffer header */
+    STREAM_TO_UINT16 (hci_len, p);
+    p_msg->offset += 4;
+
+#if (L2CAP_HOST_FLOW_CTRL == TRUE)
+    /* Send ack if we hit the threshold */
+    if (++p_lcb->link_pkts_unacked >= p_lcb->link_ack_thresh)
+        btu_hcif_send_host_rdy_for_data();
+#endif
+
+    /* Extract the length and CID */
+    STREAM_TO_UINT16 (l2cap_len, p);
+    STREAM_TO_UINT16 (rcv_cid, p);
+
+    /* Find the CCB for this CID */
+    if (rcv_cid >= L2CAP_BASE_APPL_CID)
+    {
+        if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, rcv_cid)) == NULL)
+        {
+            L2CAP_TRACE_WARNING1 ("L2CAP - unknown CID: 0x%04x", rcv_cid);
+            GKI_freebuf (p_msg);
+            return;
+        }
+    }
+
+    if (hci_len >= L2CAP_PKT_OVERHEAD)  /* Must receive at least the L2CAP length and CID.*/
+    {
+        p_msg->len    = hci_len - L2CAP_PKT_OVERHEAD;
+        p_msg->offset += L2CAP_PKT_OVERHEAD;
+    }
+    else
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - got incorrect hci header" );
+        GKI_freebuf (p_msg);
+        return;
+    }
+
+    if (l2cap_len != p_msg->len)
+    {
+        L2CAP_TRACE_WARNING2 ("L2CAP - bad length in pkt. Exp: %d  Act: %d",
+                              l2cap_len, p_msg->len);
+
+        GKI_freebuf (p_msg);
+        return;
+    }
+
+    /* Send the data through the channel state machine */
+    if (rcv_cid == L2CAP_SIGNALLING_CID)
+    {
+        process_l2cap_cmd (p_lcb, p, l2cap_len);
+        GKI_freebuf (p_msg);
+    }
+    else if (rcv_cid == L2CAP_CONNECTIONLESS_CID)
+    {
+        /* process_connectionless_data (p_lcb); */
+        STREAM_TO_UINT16 (psm, p);
+        L2CAP_TRACE_DEBUG1( "GOT CONNECTIONLESS DATA PSM:%d", psm ) ;
+#if (TCS_BCST_SETUP_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
+        if (psm == TCS_PSM_INTERCOM || psm == TCS_PSM_CORDLESS)
+        {
+            p_msg->offset += L2CAP_BCST_OVERHEAD;
+            p_msg->len -= L2CAP_BCST_OVERHEAD;
+            tcs_proc_bcst_msg( p_lcb->remote_bd_addr, p_msg ) ;
+            GKI_freebuf (p_msg);
+        }
+        else
+#endif
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+        /* if it is not broadcast, check UCD registration */
+        if ( l2c_ucd_check_rx_pkts( p_lcb, p_msg ) )
+        {
+            /* nothing to do */
+        }
+        else
+#endif
+            GKI_freebuf (p_msg);
+    }
+#if (BLE_INCLUDED == TRUE)
+    else if (rcv_cid == L2CAP_BLE_SIGNALLING_CID)
+    {
+        l2cble_process_sig_cmd (p_lcb, p, l2cap_len);
+        GKI_freebuf (p_msg);
+    }
+#endif
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    else if ((rcv_cid >= L2CAP_FIRST_FIXED_CHNL) && (rcv_cid <= L2CAP_LAST_FIXED_CHNL) &&
+             (l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb != NULL) )
+    {
+        /* If no CCB for this channel, allocate one */
+        if (l2cu_initialize_fixed_ccb (p_lcb, rcv_cid, &l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].fixed_chnl_opts))
+        {
+            p_ccb = p_lcb->p_fixed_ccbs[rcv_cid - L2CAP_FIRST_FIXED_CHNL];
+
+            if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+                l2c_fcr_proc_pdu (p_ccb, p_msg);
+            else
+                (*l2cb.fixed_reg[rcv_cid - L2CAP_FIRST_FIXED_CHNL].pL2CA_FixedData_Cb)(p_lcb->remote_bd_addr, p_msg);
+        }
+        else
+            GKI_freebuf (p_msg);
+    }
+#endif
+
+    else
+    {
+        if (p_ccb == NULL)
+            GKI_freebuf (p_msg);
+        else
+        {
+            /* Basic mode packets go straight to the state machine */
+            if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE)
+                l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DATA, p_msg);
+            else
+            {
+                /* eRTM or streaming mode, so we need to validate states first */
+                if ((p_ccb->chnl_state == CST_OPEN) || (p_ccb->chnl_state == CST_CONFIG))
+                    l2c_fcr_proc_pdu (p_ccb, p_msg);
+                else
+                    GKI_freebuf (p_msg);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         process_l2cap_cmd
+**
+** Description      This function is called when a packet is received on the
+**                  L2CAP signalling CID
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_l2cap_cmd (tL2C_LCB *p_lcb, UINT8 *p, UINT16 pkt_len)
+{
+    UINT8           *p_pkt_end, *p_next_cmd, *p_cfg_end, *p_cfg_start;
+    UINT8           cmd_code, cfg_code, cfg_len, id;
+    tL2C_CONN_INFO  con_info;
+    tL2CAP_CFG_INFO cfg_info;
+    UINT16          rej_reason, rej_mtu, lcid, rcid, info_type;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+    BOOLEAN         cfg_rej;
+    UINT16          cfg_rej_len, cmd_len;
+    UINT16          result;
+    tL2C_CONN_INFO  ci;
+
+#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE)
+    /* if l2cap command received in CID 1 on top of an LE link, ignore this command */
+    if (p_lcb->is_ble_link)
+        return;
+#endif
+    p_next_cmd = p;
+    p_pkt_end  = p + pkt_len;
+
+    memset (&cfg_info, 0, sizeof(cfg_info));
+
+    /* An L2CAP packet may contain multiple commands */
+    while (TRUE)
+    {
+        /* Smallest command is 4 bytes */
+        if ((p = p_next_cmd) > (p_pkt_end - 4))
+            break;
+
+        STREAM_TO_UINT8  (cmd_code, p);
+        STREAM_TO_UINT8  (id, p);
+        STREAM_TO_UINT16 (cmd_len, p);
+
+        /* Check command length does not exceed packet length */
+        if ((p_next_cmd = p + cmd_len) > p_pkt_end)
+        {
+            L2CAP_TRACE_WARNING3 ("Command len bad  pkt_len: %d  cmd_len: %d  code: %d",
+                                  pkt_len, cmd_len, cmd_code);
+            break;
+        }
+
+        switch (cmd_code)
+        {
+        case L2CAP_CMD_REJECT:
+            STREAM_TO_UINT16 (rej_reason, p);
+            if (rej_reason == L2CAP_CMD_REJ_MTU_EXCEEDED)
+            {
+                STREAM_TO_UINT16 (rej_mtu, p);
+                /* What to do with the MTU reject ? We have negotiated an MTU. For now */
+                /* we will ignore it and let a higher protocol timeout take care of it */
+
+                L2CAP_TRACE_WARNING2 ("L2CAP - MTU rej Handle: %d MTU: %d", p_lcb->handle, rej_mtu);
+            }
+            if (rej_reason == L2CAP_CMD_REJ_INVALID_CID)
+            {
+                STREAM_TO_UINT16 (rcid, p);
+                STREAM_TO_UINT16 (lcid, p);
+
+                L2CAP_TRACE_WARNING2 ("L2CAP - rej with CID invalid, LCID: 0x%04x RCID: 0x%04x", lcid, rcid);
+
+                /* Remote CID invalid. Treat as a disconnect */
+                if (((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
+                 && (p_ccb->remote_cid == rcid))
+                {
+                    /* Fake link disconnect - no reply is generated */
+                    l2c_csm_execute (p_ccb, L2CEVT_LP_DISCONNECT_IND, NULL);
+                }
+            }
+
+            /* SonyEricsson Info request Bug workaround (Continue connection) */
+            else if (rej_reason == L2CAP_CMD_REJ_NOT_UNDERSTOOD && p_lcb->w4_info_rsp)
+            {
+                btu_stop_timer (&p_lcb->info_timer_entry);
+
+                p_lcb->w4_info_rsp = FALSE;
+                ci.status = HCI_SUCCESS;
+                memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR));
+
+                /* For all channels, send the event through their FSMs */
+                for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+                {
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci);
+                }
+            }
+            break;
+
+        case L2CAP_CMD_CONN_REQ:
+            STREAM_TO_UINT16 (con_info.psm, p);
+            STREAM_TO_UINT16 (rcid, p);
+            if ((p_rcb = l2cu_find_rcb_by_psm (con_info.psm)) == NULL)
+            {
+                L2CAP_TRACE_WARNING1 ("L2CAP - rcvd conn req for unknown PSM: %d", con_info.psm);
+                l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_PSM);
+                break;
+            }
+            else
+            {
+                if (!p_rcb->api.pL2CA_ConnectInd_Cb)
+                {
+                    L2CAP_TRACE_WARNING1 ("L2CAP - rcvd conn req for outgoing-only connection PSM: %d", con_info.psm);
+                    l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_PSM);
+                    break;
+                }
+            }
+            if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL)
+            {
+                L2CAP_TRACE_ERROR0 ("L2CAP - unable to allocate CCB");
+                l2cu_reject_connection (p_lcb, rcid, id, L2CAP_CONN_NO_RESOURCES);
+                break;
+            }
+            p_ccb->remote_id = id;
+            p_ccb->p_rcb = p_rcb;
+            p_ccb->remote_cid = rcid;
+
+            l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_REQ, &con_info);
+            break;
+
+        case L2CAP_CMD_CONN_RSP:
+            STREAM_TO_UINT16 (con_info.remote_cid, p);
+            STREAM_TO_UINT16 (lcid, p);
+            STREAM_TO_UINT16 (con_info.l2cap_result, p);
+            STREAM_TO_UINT16 (con_info.l2cap_status, p);
+
+            if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) == NULL)
+            {
+                L2CAP_TRACE_WARNING2 ("L2CAP - no CCB for conn rsp, LCID: %d RCID: %d",
+                                      lcid, con_info.remote_cid);
+                break;
+            }
+            if (p_ccb->local_id != id)
+            {
+                L2CAP_TRACE_WARNING2 ("L2CAP - con rsp - bad ID. Exp: %d Got: %d",
+                                      p_ccb->local_id, id);
+                break;
+            }
+
+            if (con_info.l2cap_result == L2CAP_CONN_OK)
+                l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP, &con_info);
+            else if (con_info.l2cap_result == L2CAP_CONN_PENDING)
+                l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_PND, &con_info);
+            else
+                l2c_csm_execute(p_ccb, L2CEVT_L2CAP_CONNECT_RSP_NEG, &con_info);
+
+            break;
+
+        case L2CAP_CMD_CONFIG_REQ:
+            p_cfg_end = p + cmd_len;
+            cfg_rej = FALSE;
+            cfg_rej_len = 0;
+
+            STREAM_TO_UINT16 (lcid, p);
+            STREAM_TO_UINT16 (cfg_info.flags, p);
+
+            p_cfg_start = p;
+
+            cfg_info.flush_to_present = cfg_info.mtu_present = cfg_info.qos_present =
+                cfg_info.fcr_present = cfg_info.fcs_present = FALSE;
+
+            while (p < p_cfg_end)
+            {
+                STREAM_TO_UINT8 (cfg_code, p);
+                STREAM_TO_UINT8 (cfg_len, p);
+
+                switch (cfg_code & 0x7F)
+                {
+                case L2CAP_CFG_TYPE_MTU:
+                    cfg_info.mtu_present = TRUE;
+                    STREAM_TO_UINT16 (cfg_info.mtu, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FLUSH_TOUT:
+                    cfg_info.flush_to_present = TRUE;
+                    STREAM_TO_UINT16 (cfg_info.flush_to, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_QOS:
+                    cfg_info.qos_present = TRUE;
+                    STREAM_TO_UINT8  (cfg_info.qos.qos_flags, p);
+                    STREAM_TO_UINT8  (cfg_info.qos.service_type, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.token_rate, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.token_bucket_size, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.peak_bandwidth, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.latency, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.delay_variation, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FCR:
+                    cfg_info.fcr_present = TRUE;
+                    STREAM_TO_UINT8 (cfg_info.fcr.mode, p);
+                    STREAM_TO_UINT8 (cfg_info.fcr.tx_win_sz, p);
+                    STREAM_TO_UINT8 (cfg_info.fcr.max_transmit, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.rtrans_tout, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.mon_tout, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.mps, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FCS:
+                    cfg_info.fcs_present = TRUE;
+                    STREAM_TO_UINT8 (cfg_info.fcs, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_EXT_FLOW:
+                    cfg_info.ext_flow_spec_present = TRUE;
+                    STREAM_TO_UINT8  (cfg_info.ext_flow_spec.id, p);
+                    STREAM_TO_UINT8  (cfg_info.ext_flow_spec.stype, p);
+                    STREAM_TO_UINT16 (cfg_info.ext_flow_spec.max_sdu_size, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.sdu_inter_time, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.access_latency, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.flush_timeout, p);
+                    break;
+
+                default:
+                    /* sanity check option length */
+                    if ((cfg_len + L2CAP_CFG_OPTION_OVERHEAD) <= cmd_len)
+                    {
+                        p += cfg_len;
+                        if ((cfg_code & 0x80) == 0)
+                        {
+                            cfg_rej_len += cfg_len + L2CAP_CFG_OPTION_OVERHEAD;
+                            cfg_rej = TRUE;
+                        }
+                    }
+                    /* bad length; force loop exit */
+                    else
+                    {
+                        p = p_cfg_end;
+                        cfg_rej = TRUE;
+                    }
+                    break;
+                }
+            }
+
+            if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
+            {
+                p_ccb->remote_id = id;
+                if (cfg_rej)
+                {
+                    l2cu_send_peer_config_rej (p_ccb, p_cfg_start, (UINT16) (cmd_len - L2CAP_CONFIG_REQ_LEN), cfg_rej_len);
+                }
+                else
+                {
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_REQ, &cfg_info);
+                }
+            }
+            else
+            {
+                /* updated spec says send command reject on invalid cid */
+                l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_INVALID_CID, id, 0, 0);
+            }
+            break;
+
+        case L2CAP_CMD_CONFIG_RSP:
+            p_cfg_end = p + cmd_len;
+            STREAM_TO_UINT16 (lcid, p);
+            STREAM_TO_UINT16 (cfg_info.flags, p);
+            STREAM_TO_UINT16 (cfg_info.result, p);
+
+            cfg_info.flush_to_present = cfg_info.mtu_present = cfg_info.qos_present =
+                cfg_info.fcr_present = cfg_info.fcs_present = FALSE;
+
+            while (p < p_cfg_end)
+            {
+                STREAM_TO_UINT8 (cfg_code, p);
+                STREAM_TO_UINT8 (cfg_len, p);
+
+                switch (cfg_code & 0x7F)
+                {
+                case L2CAP_CFG_TYPE_MTU:
+                    cfg_info.mtu_present = TRUE;
+                    STREAM_TO_UINT16 (cfg_info.mtu, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FLUSH_TOUT:
+                    cfg_info.flush_to_present = TRUE;
+                    STREAM_TO_UINT16 (cfg_info.flush_to, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_QOS:
+                    cfg_info.qos_present = TRUE;
+                    STREAM_TO_UINT8  (cfg_info.qos.qos_flags, p);
+                    STREAM_TO_UINT8  (cfg_info.qos.service_type, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.token_rate, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.token_bucket_size, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.peak_bandwidth, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.latency, p);
+                    STREAM_TO_UINT32 (cfg_info.qos.delay_variation, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FCR:
+                    cfg_info.fcr_present = TRUE;
+                    STREAM_TO_UINT8 (cfg_info.fcr.mode, p);
+                    STREAM_TO_UINT8 (cfg_info.fcr.tx_win_sz, p);
+                    STREAM_TO_UINT8 (cfg_info.fcr.max_transmit, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.rtrans_tout, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.mon_tout, p);
+                    STREAM_TO_UINT16 (cfg_info.fcr.mps, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_FCS:
+                    cfg_info.fcs_present = TRUE;
+                    STREAM_TO_UINT8 (cfg_info.fcs, p);
+                    break;
+
+                case L2CAP_CFG_TYPE_EXT_FLOW:
+                    cfg_info.ext_flow_spec_present = TRUE;
+                    STREAM_TO_UINT8  (cfg_info.ext_flow_spec.id, p);
+                    STREAM_TO_UINT8  (cfg_info.ext_flow_spec.stype, p);
+                    STREAM_TO_UINT16 (cfg_info.ext_flow_spec.max_sdu_size, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.sdu_inter_time, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.access_latency, p);
+                    STREAM_TO_UINT32 (cfg_info.ext_flow_spec.flush_timeout, p);
+                    break;
+                }
+            }
+
+            if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
+            {
+                if (p_ccb->local_id != id)
+                {
+                    L2CAP_TRACE_WARNING2 ("L2CAP - cfg rsp - bad ID. Exp: %d Got: %d",
+                                          p_ccb->local_id, id);
+                    break;
+                }
+                if ( (cfg_info.result == L2CAP_CFG_OK) || (cfg_info.result == L2CAP_CFG_PENDING) )
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_RSP, &cfg_info);
+                else
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_CONFIG_RSP_NEG, &cfg_info);
+            }
+            else
+            {
+                L2CAP_TRACE_WARNING1 ("L2CAP - rcvd cfg rsp for unknown CID: 0x%04x", lcid);
+            }
+            break;
+
+
+        case L2CAP_CMD_DISC_REQ:
+            STREAM_TO_UINT16 (lcid, p);
+            STREAM_TO_UINT16 (rcid, p);
+
+            if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
+            {
+                if (p_ccb->remote_cid == rcid)
+                {
+                    p_ccb->remote_id = id;
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DISCONNECT_REQ, &con_info);
+                }
+            }
+            else
+                l2cu_send_peer_disc_rsp (p_lcb, id, lcid, rcid);
+
+            break;
+
+        case L2CAP_CMD_DISC_RSP:
+            STREAM_TO_UINT16 (rcid, p);
+            STREAM_TO_UINT16 (lcid, p);
+
+            if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, lcid)) != NULL)
+            {
+                if ((p_ccb->remote_cid == rcid) && (p_ccb->local_id == id))
+                {
+                    l2c_csm_execute (p_ccb, L2CEVT_L2CAP_DISCONNECT_RSP, &con_info);
+                }
+            }
+            break;
+
+        case L2CAP_CMD_ECHO_REQ:
+
+#if (L2CAP_ENHANCED_FEATURES != 0)
+            if (!l2cu_check_feature_req (p_lcb, id, p, cmd_len))
+            {
+                if (cmd_len < (btu_cb.hcit_acl_pkt_size - L2CAP_PKT_OVERHEAD
+                                                        - L2CAP_CMD_OVERHEAD
+                                                        - L2CAP_ECHO_RSP_LEN
+                                                        - HCI_DATA_PREAMBLE_SIZE))
+                {
+                    l2cu_send_peer_echo_rsp (p_lcb, id, p, cmd_len);
+                }
+                else
+                {
+                    l2cu_send_peer_echo_rsp (p_lcb, id, NULL, 0);
+                }
+            }
+#else
+            l2cu_send_peer_echo_rsp (p_lcb, id, NULL, 0);
+#endif
+            break;
+
+        case L2CAP_CMD_ECHO_RSP:
+#if (L2CAP_ENHANCED_FEATURES != 0)
+            l2cu_check_feature_rsp (p_lcb, id, p, cmd_len);
+#endif
+            if (p_lcb->p_echo_rsp_cb)
+            {
+                tL2CA_ECHO_RSP_CB *p_cb = p_lcb->p_echo_rsp_cb;
+
+                /* Zero out the callback in case app immediately calls us again */
+                p_lcb->p_echo_rsp_cb = NULL;
+
+                (*p_cb) (L2CAP_PING_RESULT_OK);
+            }
+            break;
+
+        case L2CAP_CMD_INFO_REQ:
+            STREAM_TO_UINT16 (info_type, p);
+            l2cu_send_peer_info_rsp (p_lcb, id, info_type);
+            break;
+
+        case L2CAP_CMD_INFO_RSP:
+            /* Stop the link connect timer if sent before L2CAP connection is up */
+            if (p_lcb->w4_info_rsp)
+            {
+                btu_stop_timer (&p_lcb->info_timer_entry);
+                p_lcb->w4_info_rsp = FALSE;
+            }
+
+            STREAM_TO_UINT16 (info_type, p);
+            STREAM_TO_UINT16 (result, p);
+
+            p_lcb->info_rx_bits |= (1 << info_type);
+
+            if ( (info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
+              && (result == L2CAP_INFO_RESP_RESULT_SUCCESS) )
+            {
+                STREAM_TO_UINT32( p_lcb->peer_ext_fea, p );
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+                if (p_lcb->peer_ext_fea & L2CAP_EXTFEA_FIXED_CHNLS)
+                {
+                    l2cu_send_peer_info_req (p_lcb, L2CAP_FIXED_CHANNELS_INFO_TYPE);
+                    break;
+                }
+                else
+                {
+                    l2cu_process_fixed_chnl_resp (p_lcb);
+                }
+#endif
+            }
+
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+            if (info_type == L2CAP_FIXED_CHANNELS_INFO_TYPE)
+            {
+                if (result == L2CAP_INFO_RESP_RESULT_SUCCESS)
+                {
+                    memcpy (p_lcb->peer_chnl_mask, p, L2CAP_FIXED_CHNL_ARRAY_SIZE);
+                }
+
+                l2cu_process_fixed_chnl_resp (p_lcb);
+            }
+#endif
+#if (L2CAP_UCD_INCLUDED == TRUE)
+            else if (info_type == L2CAP_CONNLESS_MTU_INFO_TYPE)
+            {
+                if (result == L2CAP_INFO_RESP_RESULT_SUCCESS)
+                {
+                    STREAM_TO_UINT16 (p_lcb->ucd_mtu, p);
+                }
+            }
+#endif
+
+            ci.status = HCI_SUCCESS;
+            memcpy (ci.bd_addr, p_lcb->remote_bd_addr, sizeof(BD_ADDR));
+            for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+            {
+                l2c_csm_execute (p_ccb, L2CEVT_L2CAP_INFO_RSP, &ci);
+            }
+            break;
+
+        default:
+            L2CAP_TRACE_WARNING1 ("L2CAP - bad cmd code: %d", cmd_code);
+            l2cu_send_peer_cmd_reject (p_lcb, L2CAP_CMD_REJ_NOT_UNDERSTOOD, id, 0, 0);
+            return;
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_process_held_packets
+**
+** Description      This function processes any L2CAP packets that arrived before
+**                  the HCI connection complete arrived. It is a work around for
+**                  badly behaved controllers.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_process_held_packets (BOOLEAN timed_out)
+{
+    BT_HDR      *p_buf, *p_buf1;
+    BUFFER_Q    *p_rcv_hold_q = &l2cb.rcv_hold_q;
+
+    if (!p_rcv_hold_q->count)
+        return;
+
+    if (!timed_out)
+    {
+        btu_stop_timer(&l2cb.rcv_hold_tle);
+        L2CAP_TRACE_WARNING0("L2CAP HOLD CONTINUE");
+    }
+    else
+    {
+        L2CAP_TRACE_WARNING0("L2CAP HOLD TIMEOUT");
+    }
+
+    /* Update the timeouts in the hold queue */
+    for (p_buf = (BT_HDR *)GKI_getfirst (p_rcv_hold_q); p_buf; p_buf = p_buf1)
+    {
+        p_buf1 = (BT_HDR *)GKI_getnext (p_buf);
+        if (!timed_out || (!p_buf->layer_specific) || (--p_buf->layer_specific == 0))
+        {
+            GKI_remove_from_queue (p_rcv_hold_q, p_buf);
+            p_buf->layer_specific = 0xFFFF;
+            l2c_rcv_acl_data (p_buf);
+        }
+    }
+
+    /* If anyone still in the queue, restart the timeout */
+    if (p_rcv_hold_q->count)
+        btu_start_timer (&l2cb.rcv_hold_tle, BTU_TTYPE_L2CAP_HOLD, BT_1SEC_TIMEOUT);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2c_init
+**
+** Description      This function is called once at startup to initialize
+**                  all the L2CAP structures
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_init (void)
+{
+    INT16  xx;
+
+    memset (&l2cb, 0, sizeof (tL2C_CB));
+    /* the psm is increased by 2 before being used */
+    l2cb.dyn_psm = 0xFFF;
+
+    /* Put all the channel control blocks on the free queue */
+    for (xx = 0; xx < MAX_L2CAP_CHANNELS - 1; xx++)
+    {
+        l2cb.ccb_pool[xx].p_next_ccb = &l2cb.ccb_pool[xx + 1];
+    }
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    /* it will be set to L2CAP_PKT_START_NON_FLUSHABLE if controller supports */
+    l2cb.non_flushable_pbf = L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT;
+#endif
+
+
+    l2cb.p_free_ccb_first = &l2cb.ccb_pool[0];
+    l2cb.p_free_ccb_last  = &l2cb.ccb_pool[MAX_L2CAP_CHANNELS - 1];
+
+#ifdef L2CAP_DESIRED_LINK_ROLE
+    l2cb.desire_role      = L2CAP_DESIRED_LINK_ROLE;
+#else
+    l2cb.desire_role      = HCI_ROLE_SLAVE;
+#endif
+
+    /* Set the default idle timeout */
+    l2cb.idle_timeout = L2CAP_LINK_INACTIVITY_TOUT;
+
+#if defined(L2CAP_INITIAL_TRACE_LEVEL)
+    l2cb.l2cap_trace_level = L2CAP_INITIAL_TRACE_LEVEL;
+#else
+    l2cb.l2cap_trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+
+#if L2CAP_CONFORMANCE_TESTING == TRUE
+     /* Conformance testing needs a dynamic response */
+    l2cb.test_info_resp = L2CAP_EXTFEA_SUPPORTED_MASK;
+#endif
+
+    /* Number of ACL buffers to use for high priority channel */
+#if (defined(L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE) && (L2CAP_HIGH_PRI_CHAN_QUOTA_IS_CONFIGURABLE == TRUE))
+    l2cb.high_pri_min_xmit_quota = L2CAP_HIGH_PRI_MIN_XMIT_QUOTA;
+#endif
+
+}
+
+/*******************************************************************************
+**
+** Function         l2c_process_timeout
+**
+** Description      This function is called when an L2CAP-related timeout occurs
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2c_process_timeout (TIMER_LIST_ENT *p_tle)
+{
+    /* What type of timeout ? */
+    switch (p_tle->event)
+    {
+    case BTU_TTYPE_L2CAP_LINK:
+        l2c_link_timeout ((tL2C_LCB *)p_tle->param);
+        break;
+
+    case BTU_TTYPE_L2CAP_CHNL:
+        l2c_csm_execute (((tL2C_CCB *)p_tle->param), L2CEVT_TIMEOUT, NULL);
+        break;
+
+    case BTU_TTYPE_L2CAP_FCR_ACK:
+        l2c_csm_execute (((tL2C_CCB *)p_tle->param), L2CEVT_ACK_TIMEOUT, NULL);
+        break;
+
+    case BTU_TTYPE_L2CAP_HOLD:
+        /* Update the timeouts in the hold queue */
+        l2c_process_held_packets(TRUE);
+        break;
+
+    case BTU_TTYPE_L2CAP_INFO:
+        l2c_info_timeout((tL2C_LCB *)p_tle->param);
+        break;
+
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_data_write
+**
+** Description      API functions call this function to write data.
+**
+** Returns          L2CAP_DW_SUCCESS, if data accepted, else FALSE
+**                  L2CAP_DW_CONGESTED, if data accepted and the channel is congested
+**                  L2CAP_DW_FAILED, if error
+**
+*******************************************************************************/
+UINT8 l2c_data_write (UINT16 cid, BT_HDR *p_data, UINT16 flags)
+{
+    tL2C_CCB        *p_ccb;
+
+    /* Find the channel control block. We don't know the link it is on. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (NULL, cid)) == NULL)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no CCB for L2CA_DataWrite, CID: %d", cid);
+        GKI_freebuf (p_data);
+        return (L2CAP_DW_FAILED);
+    }
+
+#ifndef TESTER /* Tester may send any amount of data. otherwise sending message
+                  bigger than mtu size of peer is a violation of protocol */
+    if (p_data->len > p_ccb->peer_cfg.mtu)
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - CID: 0x%04x  cannot send message bigger than peer's mtu size", cid);
+        GKI_freebuf (p_data);
+        return (L2CAP_DW_FAILED);
+    }
+#endif
+
+    /* channel based, packet based flushable or non-flushable */
+    p_data->layer_specific = flags;
+
+    /* If already congested, do not accept any more packets */
+    if (p_ccb->cong_sent)
+    {
+        L2CAP_TRACE_ERROR3 ("L2CAP - CID: 0x%04x cannot send, already congested  xmit_hold_q.count: %u  buff_quota: %u",
+                            p_ccb->local_cid, p_ccb->xmit_hold_q.count, p_ccb->buff_quota);
+
+        GKI_freebuf (p_data);
+        return (L2CAP_DW_FAILED);
+    }
+
+    l2c_csm_execute (p_ccb, L2CEVT_L2CA_DATA_WRITE, p_data);
+
+    if (p_ccb->cong_sent)
+        return (L2CAP_DW_CONGESTED);
+
+    return (L2CAP_DW_SUCCESS);
+}
+
diff --git a/stack/l2cap/l2c_ucd.c b/stack/l2cap/l2c_ucd.c
new file mode 100644
index 0000000..4dfc804
--- /dev/null
+++ b/stack/l2cap/l2c_ucd.c
@@ -0,0 +1,1170 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the L2CAP UCD code
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+static BOOLEAN l2c_ucd_connect ( BD_ADDR rem_bda );
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_discover_cback
+**
+** Description      UCD Discover callback
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_discover_cback (BD_ADDR rem_bda, UINT8 info_type, UINT32 data)
+{
+    tL2C_RCB    *p_rcb = &l2cb.rcb_pool[0];
+    UINT16      xx;
+
+    L2CAP_TRACE_DEBUG0 ("L2CAP - l2c_ucd_discover_cback");
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if (p_rcb->in_use)
+        {
+            /* if this application is waiting UCD reception info */
+            if (( info_type == L2CAP_UCD_INFO_TYPE_RECEPTION )
+                && ( p_rcb->ucd.state & L2C_UCD_STATE_W4_RECEPTION ))
+            {
+                p_rcb->ucd.cb_info.pL2CA_UCD_Discover_Cb (rem_bda, info_type, data);
+                p_rcb->ucd.state &= ~(L2C_UCD_STATE_W4_RECEPTION);
+            }
+
+            /* if this application is waiting UCD MTU info */
+            if (( info_type == L2CAP_UCD_INFO_TYPE_MTU )
+                && ( p_rcb->ucd.state & L2C_UCD_STATE_W4_MTU ))
+            {
+                p_rcb->ucd.cb_info.pL2CA_UCD_Discover_Cb (rem_bda, info_type, data);
+                p_rcb->ucd.state &= ~(L2C_UCD_STATE_W4_MTU);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_data_ind_cback
+**
+** Description      UCD Data callback
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_data_ind_cback (BD_ADDR rem_bda, BT_HDR *p_buf)
+{
+    UINT8 *p;
+    UINT16 psm;
+    tL2C_RCB    *p_rcb;
+
+    L2CAP_TRACE_DEBUG0 ("L2CAP - l2c_ucd_data_ind_cback");
+
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    STREAM_TO_UINT16(psm, p)
+
+    p_buf->offset += L2CAP_UCD_OVERHEAD;
+    p_buf->len    -= L2CAP_UCD_OVERHEAD;
+
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - no RCB for l2c_ucd_data_ind_cback, PSM: 0x%04x", psm);
+        GKI_freebuf (p_buf);
+    }
+    else
+    {
+        p_rcb->ucd.cb_info.pL2CA_UCD_Data_Cb(rem_bda, p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_congestion_status_cback
+**
+** Description      UCD Congestion Status callback
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_congestion_status_cback (BD_ADDR rem_bda, BOOLEAN is_congested)
+{
+    tL2C_RCB    *p_rcb = &l2cb.rcb_pool[0];
+    UINT16      xx;
+
+    L2CAP_TRACE_DEBUG0 ("L2CAP - l2c_ucd_congestion_status_cback");
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if (( p_rcb->in_use )
+          &&( p_rcb->ucd.state != L2C_UCD_STATE_UNUSED ))
+        {
+            if ( p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb )
+            {
+                L2CAP_TRACE_DEBUG4 ("L2CAP - Calling UCDCongestionStatus_Cb (%d), PSM=0x%04x, BDA: %08x%04x,",
+                                    is_congested, p_rcb->psm,
+                                    (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                                    (rem_bda[4]<<8)+rem_bda[5]);
+
+                p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb ( rem_bda, is_congested );
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_disconnect_ind_cback
+**
+** Description      UCD disconnect callback (This prevent to access null pointer)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_disconnect_ind_cback (UINT16 cid, BOOLEAN result)
+{
+    /* do nothing */
+}
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_config_ind_cback
+**
+** Description      UCD config callback (This prevent to access null pointer)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_config_ind_cback (UINT16 cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* do nothing */
+}
+
+/*******************************************************************************
+**
+** Function         l2c_ucd_config_cfm_cback
+**
+** Description      UCD config callback (This prevent to access null pointer)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void l2c_ucd_config_cfm_cback (UINT16 cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* do nothing */
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdRegister
+**
+**  Description     Register PSM on UCD.
+**
+**  Parameters:     tL2CAP_UCD_CB_INFO
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+BOOLEAN L2CA_UcdRegister ( UINT16 psm, tL2CAP_UCD_CB_INFO *p_cb_info )
+{
+    tL2C_RCB             *p_rcb;
+
+    L2CAP_TRACE_API1  ("L2CA_UcdRegister()  PSM: 0x%04x", psm);
+
+    if ((!p_cb_info->pL2CA_UCD_Discover_Cb)
+     || (!p_cb_info->pL2CA_UCD_Data_Cb))
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - no callback registering PSM(0x%04x) on UCD", psm);
+        return (FALSE);
+    }
+
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - no RCB for L2CA_UcdRegister, PSM: 0x%04x", psm);
+        return (FALSE);
+    }
+
+    p_rcb->ucd.state   = L2C_UCD_STATE_W4_DATA;
+    p_rcb->ucd.cb_info = *p_cb_info;
+
+    /* check if master rcb is created for UCD */
+    if ((p_rcb = l2cu_find_rcb_by_psm (L2C_UCD_RCB_ID)) == NULL)
+    {
+        if ((p_rcb = l2cu_allocate_rcb (L2C_UCD_RCB_ID)) == NULL)
+        {
+            L2CAP_TRACE_ERROR0 ("L2CAP - no RCB available for L2CA_UcdRegister");
+            return (FALSE);
+        }
+        else
+        {
+            /* these callback functions will forward data to each UCD application */
+            p_rcb->ucd.cb_info.pL2CA_UCD_Discover_Cb            = l2c_ucd_discover_cback;
+            p_rcb->ucd.cb_info.pL2CA_UCD_Data_Cb                = l2c_ucd_data_ind_cback;
+            p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb   = l2c_ucd_congestion_status_cback;
+
+            memset (&p_rcb->api, 0, sizeof(tL2CAP_APPL_INFO));
+            p_rcb->api.pL2CA_DisconnectInd_Cb        = l2c_ucd_disconnect_ind_cback;
+
+            /* This will make L2CAP check UCD congestion callback */
+            p_rcb->api.pL2CA_CongestionStatus_Cb     = NULL;
+
+            /* do nothing but prevent crash */
+            p_rcb->api.pL2CA_ConfigInd_Cb            = l2c_ucd_config_ind_cback;
+            p_rcb->api.pL2CA_ConfigCfm_Cb            = l2c_ucd_config_cfm_cback;
+        }
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDeregister
+**
+**  Description     Deregister PSM on UCD.
+**
+**  Parameters:     PSM
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+BOOLEAN L2CA_UcdDeregister ( UINT16 psm )
+{
+    tL2C_CCB    *p_ccb;
+    tL2C_RCB    *p_rcb;
+    UINT16      xx;
+
+    L2CAP_TRACE_API1  ("L2CA_UcdDeregister()  PSM: 0x%04x", psm);
+
+    if ((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+    {
+        L2CAP_TRACE_ERROR1 ("L2CAP - no RCB for L2CA_UcdDeregister, PSM: 0x%04x", psm);
+        return (FALSE);
+    }
+
+    p_rcb->ucd.state = L2C_UCD_STATE_UNUSED;
+
+    /* check this was the last UCD registration */
+    p_rcb = &l2cb.rcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if ((p_rcb->in_use) && (p_rcb->ucd.state != L2C_UCD_STATE_UNUSED))
+            return (TRUE);
+    }
+
+    /* delete master rcb for UCD */
+    if ((p_rcb = l2cu_find_rcb_by_psm (L2C_UCD_RCB_ID)) != NULL)
+    {
+        l2cu_release_rcb (p_rcb);
+    }
+
+    /* delete CCB for UCD */
+    p_ccb = l2cb.ccb_pool;
+    for ( xx = 0; xx < MAX_L2CAP_CHANNELS; xx++ )
+    {
+        if (( p_ccb->in_use )
+          &&( p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID ))
+        {
+            l2cu_release_ccb (p_ccb);
+        }
+        p_ccb++;
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDiscover
+**
+**  Description     Discover UCD of remote device.
+**
+**  Parameters:     PSM
+**                  BD_ADDR of remote device
+**                  info_type : L2CAP_UCD_INFO_TYPE_RECEPTION
+**                              L2CAP_UCD_INFO_TYPE_MTU
+**
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+BOOLEAN L2CA_UcdDiscover ( UINT16 psm, BD_ADDR rem_bda, UINT8 info_type )
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+
+    L2CAP_TRACE_API4 ("L2CA_UcdDiscover()  PSM: 0x%04x  BDA: %08x%04x, InfoType=0x%02x", psm,
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                      (rem_bda[4]<<8)+rem_bda[5], info_type);
+
+    /* Fail if the PSM is not registered */
+    if (((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+        ||( p_rcb->ucd.state == L2C_UCD_STATE_UNUSED ))
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no RCB for L2CA_UcdDiscover, PSM: 0x%04x", psm);
+        return (FALSE);
+    }
+
+    /* First, see if we already have a link to the remote */
+    /* then find the channel control block for UCD. */
+    if (((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+      ||((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL))
+    {
+        if ( l2c_ucd_connect (rem_bda) == FALSE )
+        {
+            return (FALSE);
+        }
+    }
+
+    /* set waiting flags in rcb */
+
+    if ( info_type & L2CAP_UCD_INFO_TYPE_RECEPTION )
+        p_rcb->ucd.state |= L2C_UCD_STATE_W4_RECEPTION;
+
+    if ( info_type & L2CAP_UCD_INFO_TYPE_MTU )
+        p_rcb->ucd.state |= L2C_UCD_STATE_W4_MTU;
+
+    /* if link is already established */
+    if ((p_lcb)&&(p_lcb->link_state == LST_CONNECTED))
+    {
+        if (!p_ccb)
+        {
+            p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID);
+        }
+        l2c_ucd_check_pending_info_req(p_ccb);
+    }
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdDataWrite
+**
+**  Description     Send UCD to remote device
+**
+**  Parameters:     PSM
+**                  BD Address of remote
+**                  Pointer to buffer of type BT_HDR
+**                  flags : L2CAP_FLUSHABLE_CH_BASED
+**                          L2CAP_FLUSHABLE_PKT
+**                          L2CAP_NON_FLUSHABLE_PKT
+**
+** Return value     L2CAP_DW_SUCCESS, if data accepted
+**                  L2CAP_DW_FAILED,  if error
+**
+*******************************************************************************/
+UINT16 L2CA_UcdDataWrite (UINT16 psm, BD_ADDR rem_bda, BT_HDR *p_buf, UINT16 flags)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+    UINT8           *p;
+
+    L2CAP_TRACE_API3 ("L2CA_UcdDataWrite()  PSM: 0x%04x  BDA: %08x%04x", psm,
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                      (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* Fail if the PSM is not registered */
+    if (((p_rcb = l2cu_find_rcb_by_psm (psm)) == NULL)
+        ||( p_rcb->ucd.state == L2C_UCD_STATE_UNUSED ))
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - no RCB for L2CA_UcdDataWrite, PSM: 0x%04x", psm);
+        GKI_freebuf (p_buf);
+        return (L2CAP_DW_FAILED);
+    }
+
+    /* First, see if we already have a link to the remote */
+    /*  then find the channel control block for UCD */
+    if (((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+      ||((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL))
+    {
+        if ( l2c_ucd_connect (rem_bda) == FALSE )
+        {
+            GKI_freebuf (p_buf);
+            return (L2CAP_DW_FAILED);
+        }
+
+        /* If we still don't have lcb and ccb after connect attempt, then can't proceed */
+        if (((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+            || ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL))
+        {
+            GKI_freebuf (p_buf);
+            return (L2CAP_DW_FAILED);
+        }
+    }
+
+    /* write PSM */
+    p_buf->offset -= L2CAP_UCD_OVERHEAD;
+    p_buf->len += L2CAP_UCD_OVERHEAD;
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    UINT16_TO_STREAM (p, psm);
+
+    /* UCD MTU check */
+    if ((p_lcb->ucd_mtu) && (p_buf->len > p_lcb->ucd_mtu))
+    {
+        L2CAP_TRACE_WARNING1 ("L2CAP - Handle: 0x%04x  UCD bigger than peer's UCD mtu size cannot be sent", p_lcb->handle);
+        GKI_freebuf (p_buf);
+        return (L2CAP_DW_FAILED);
+    }
+
+    /* If already congested, do not accept any more packets */
+    if (p_ccb->cong_sent)
+    {
+        L2CAP_TRACE_ERROR3 ("L2CAP - Handle: 0x%04x UCD cannot be sent, already congested count: %u  buff_quota: %u",
+                            p_lcb->handle,
+                            (p_ccb->xmit_hold_q.count + p_lcb->ucd_out_sec_pending_q.count),
+                            p_ccb->buff_quota);
+
+        GKI_freebuf (p_buf);
+        return (L2CAP_DW_FAILED);
+    }
+
+    /* channel based, packet based flushable or non-flushable */
+    p_buf->layer_specific = flags;
+
+    l2c_csm_execute (p_ccb, L2CEVT_L2CA_DATA_WRITE, p_buf);
+
+    if (p_ccb->cong_sent)
+        return (L2CAP_DW_CONGESTED);
+    else
+        return (L2CAP_DW_SUCCESS);
+}
+
+/*******************************************************************************
+**
+**  Function        L2CA_UcdSetIdleTimeout
+**
+**  Description     Set UCD Idle timeout.
+**
+**  Parameters:     BD Addr
+**                  Timeout in second
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+BOOLEAN L2CA_UcdSetIdleTimeout ( BD_ADDR rem_bda, UINT16 timeout )
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API3 ("L2CA_UcdSetIdleTimeout()  Timeout: 0x%04x  BDA: %08x%04x", timeout,
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                      (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* First, see if we already have a link to the remote */
+    /* then find the channel control block. */
+    if (((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+      ||((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL))
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no UCD channel");
+        return (FALSE);
+    }
+    else
+    {
+        p_ccb->fixed_chnl_idle_tout = timeout;
+        return (TRUE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         L2CA_UCDSetTxPriority
+**
+** Description      Sets the transmission priority for a connectionless channel.
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+BOOLEAN L2CA_UCDSetTxPriority ( BD_ADDR rem_bda, tL2CAP_CHNL_PRIORITY priority )
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+
+    L2CAP_TRACE_API3 ("L2CA_UCDSetTxPriority()  priority: 0x%02x  BDA: %08x%04x", priority,
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                      (rem_bda[4]<<8)+rem_bda[5]);
+
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no LCB for L2CA_UCDSetTxPriority");
+        return (FALSE);
+    }
+
+    /* Find the channel control block */
+    if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no CCB for L2CA_UCDSetTxPriority");
+        return (FALSE);
+    }
+
+    /* it will update the order of CCB in LCB by priority and update round robin service variables */
+    l2cu_change_pri_ccb (p_ccb, priority);
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_connect
+**
+**  Description     Connect UCD to remote device.
+**
+**  Parameters:     BD_ADDR of remote device
+**
+**  Return value:   TRUE if successs
+**
+*******************************************************************************/
+static BOOLEAN l2c_ucd_connect ( BD_ADDR rem_bda )
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_RCB        *p_rcb;
+
+    L2CAP_TRACE_DEBUG2 ("l2c_ucd_connect()  BDA: %08x%04x",
+                      (rem_bda[0]<<24)+(rem_bda[1]<<16)+(rem_bda[2]<<8)+rem_bda[3],
+                      (rem_bda[4]<<8)+rem_bda[5]);
+
+    /* Fail if we have not established communications with the controller */
+    if (!BTM_IsDeviceUp())
+    {
+        L2CAP_TRACE_WARNING0 ("l2c_ucd_connect - BTU not ready");
+        return (FALSE);
+    }
+
+    /* First, see if we already have a link to the remote */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr (rem_bda)) == NULL)
+    {
+        /* No link. Get an LCB and start link establishment */
+        if ( ((p_lcb = l2cu_allocate_lcb (rem_bda, FALSE)) == NULL)
+         ||  (l2cu_create_conn(p_lcb) == FALSE) )
+        {
+            L2CAP_TRACE_WARNING0 ("L2CAP - conn not started l2c_ucd_connect");
+            return (FALSE);
+        }
+    }
+    else if ( p_lcb->info_rx_bits & (1 << L2CAP_EXTENDED_FEATURES_INFO_TYPE) )
+    {
+        if (!(p_lcb->peer_ext_fea & L2CAP_EXTFEA_UCD_RECEPTION))
+        {
+            L2CAP_TRACE_WARNING0 ("L2CAP - UCD is not supported by peer, l2c_ucd_connect");
+            return (FALSE);
+        }
+    }
+
+    /* Find the channel control block. */
+    if ((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) == NULL)
+    {
+        /* Allocate a channel control block */
+        if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL)
+        {
+            L2CAP_TRACE_WARNING0 ("L2CAP - no CCB for l2c_ucd_connect");
+            return (FALSE);
+        }
+        else
+        {
+            /* Set CID for the connection */
+            p_ccb->local_cid  = L2CAP_CONNECTIONLESS_CID;
+            p_ccb->remote_cid = L2CAP_CONNECTIONLESS_CID;
+
+            /* Set the default idle timeout value to use */
+            p_ccb->fixed_chnl_idle_tout = L2CAP_UCD_IDLE_TIMEOUT;
+
+            /* Set the default channel priority value to use */
+            l2cu_change_pri_ccb (p_ccb, L2CAP_UCD_CH_PRIORITY);
+
+            if ((p_rcb = l2cu_find_rcb_by_psm (L2C_UCD_RCB_ID)) == NULL)
+            {
+                L2CAP_TRACE_WARNING0 ("L2CAP - no UCD registered, l2c_ucd_connect");
+                return (FALSE);
+            }
+            /* Save UCD registration info */
+            p_ccb->p_rcb = p_rcb;
+
+            /* There is no configuration, so if the link is up, the channel is up */
+            if (p_lcb->link_state == LST_CONNECTED)
+            {
+                p_ccb->chnl_state = CST_OPEN;
+            }
+        }
+    }
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_delete_sec_pending_q
+**
+** Description      discard all of UCD packets in security pending queue
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2c_ucd_delete_sec_pending_q(tL2C_LCB  *p_lcb)
+{
+    /* clean up any security pending UCD */
+    while (p_lcb->ucd_out_sec_pending_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_lcb->ucd_out_sec_pending_q));
+
+    while (p_lcb->ucd_in_sec_pending_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_lcb->ucd_in_sec_pending_q));
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_check_pending_info_req
+**
+** Description      check if any application is waiting for UCD information
+**
+**  Return          TRUE if any pending UCD info request
+**
+*******************************************************************************/
+BOOLEAN l2c_ucd_check_pending_info_req(tL2C_CCB  *p_ccb)
+{
+    tL2C_RCB    *p_rcb = &l2cb.rcb_pool[0];
+    UINT16      xx;
+    BOOLEAN     pending = FALSE;
+
+    if (p_ccb == NULL)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP - NULL p_ccb in l2c_ucd_check_pending_info_req");
+        return (FALSE);
+    }
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if (p_rcb->in_use)
+        {
+            /* if application is waiting UCD reception info */
+            if (p_rcb->ucd.state & L2C_UCD_STATE_W4_RECEPTION)
+            {
+                /* if this information is available */
+                if ( p_ccb->p_lcb->info_rx_bits & (1 << L2CAP_EXTENDED_FEATURES_INFO_TYPE) )
+                {
+                    if (!(p_ccb->p_lcb->peer_ext_fea & L2CAP_EXTFEA_UCD_RECEPTION))
+                    {
+                        L2CAP_TRACE_WARNING0 ("L2CAP - UCD is not supported by peer, l2c_ucd_check_pending_info_req");
+
+                        l2c_ucd_delete_sec_pending_q(p_ccb->p_lcb);
+                        l2cu_release_ccb (p_ccb);
+                    }
+
+                    p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Discover_Cb (p_ccb->p_lcb->remote_bd_addr,
+                                                                     L2CAP_UCD_INFO_TYPE_RECEPTION,
+                                                                     p_ccb->p_lcb->peer_ext_fea & L2CAP_EXTFEA_UCD_RECEPTION);
+                }
+                else
+                {
+                    pending = TRUE;
+                    if (p_ccb->p_lcb->w4_info_rsp == FALSE)
+                    {
+                        l2cu_send_peer_info_req (p_ccb->p_lcb, L2CAP_EXTENDED_FEATURES_INFO_TYPE);
+                    }
+                }
+            }
+
+            /* if application is waiting for UCD MTU */
+            if (p_rcb->ucd.state & L2C_UCD_STATE_W4_MTU)
+            {
+                /* if this information is available */
+                if ( p_ccb->p_lcb->info_rx_bits & (1 << L2CAP_CONNLESS_MTU_INFO_TYPE))
+                {
+                    p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Discover_Cb (p_ccb->p_lcb->remote_bd_addr,
+                                                                     L2CAP_UCD_INFO_TYPE_MTU,
+                                                                     p_ccb->p_lcb->ucd_mtu);
+                }
+                else
+                {
+                    pending = TRUE;
+                    if (p_ccb->p_lcb->w4_info_rsp == FALSE)
+                    {
+                        l2cu_send_peer_info_req (p_ccb->p_lcb, L2CAP_CONNLESS_MTU_INFO_TYPE);
+                    }
+                }
+            }
+        }
+    }
+    return (pending);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_enqueue_pending_out_sec_q
+**
+**  Description     enqueue outgoing UCD packet into security pending queue
+**                  and check congestion
+**
+**  Return          None
+**
+*******************************************************************************/
+void l2c_ucd_enqueue_pending_out_sec_q(tL2C_CCB  *p_ccb, void *p_data)
+{
+    GKI_enqueue (&p_ccb->p_lcb->ucd_out_sec_pending_q, p_data);
+    l2cu_check_channel_congestion (p_ccb);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_check_pending_out_sec_q
+**
+**  Description     check outgoing security
+**
+**  Return          TRUE if any UCD packet for security
+**
+*******************************************************************************/
+BOOLEAN l2c_ucd_check_pending_out_sec_q(tL2C_CCB  *p_ccb)
+{
+    UINT8 *p;
+    UINT16 psm;
+    BT_HDR *p_buf;
+
+    if ( p_ccb->p_lcb->ucd_out_sec_pending_q.count )
+    {
+        p_buf = (BT_HDR*)(p_ccb->p_lcb->ucd_out_sec_pending_q.p_first);
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+        STREAM_TO_UINT16(psm, p)
+
+        p_ccb->chnl_state = CST_ORIG_W4_SEC_COMP;
+        btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, psm,
+                                  p_ccb->p_lcb->handle, CONNLESS_ORIG, &l2c_link_sec_comp, p_ccb);
+
+        return (TRUE);
+    }
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_send_pending_out_sec_q
+**
+**  Description     dequeue UCD packet from security pending queue and
+**                  enqueue it into CCB
+**
+**  Return          None
+**
+*******************************************************************************/
+void l2c_ucd_send_pending_out_sec_q(tL2C_CCB  *p_ccb)
+{
+    BT_HDR *p_buf;
+
+    if ( p_ccb->p_lcb->ucd_out_sec_pending_q.count )
+    {
+        p_buf = (BT_HDR*)GKI_dequeue (&p_ccb->p_lcb->ucd_out_sec_pending_q);
+
+        l2c_enqueue_peer_data (p_ccb, (BT_HDR *)p_buf);
+        l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_discard_pending_out_sec_q
+**
+**  Description     dequeue UCD packet from security pending queue and
+**                  discard it.
+**
+**  Return          None
+**
+*******************************************************************************/
+void l2c_ucd_discard_pending_out_sec_q(tL2C_CCB  *p_ccb)
+{
+    BT_HDR *p_buf;
+
+    p_buf = (BT_HDR*)GKI_dequeue (&p_ccb->p_lcb->ucd_out_sec_pending_q);
+
+    /* we may need to report to application */
+
+    if (p_buf)
+    {
+        GKI_freebuf (p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_check_pending_in_sec_q
+**
+**  Description     check incoming security
+**
+**  Return          TRUE if any UCD packet for security
+**
+*******************************************************************************/
+BOOLEAN l2c_ucd_check_pending_in_sec_q(tL2C_CCB  *p_ccb)
+{
+    UINT8 *p;
+    UINT16 psm;
+    BT_HDR *p_buf;
+
+    if ( p_ccb->p_lcb->ucd_in_sec_pending_q.count )
+    {
+        p_buf = (BT_HDR*)(p_ccb->p_lcb->ucd_in_sec_pending_q.p_first);
+        p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+        STREAM_TO_UINT16(psm, p)
+
+        p_ccb->chnl_state = CST_TERM_W4_SEC_COMP;
+        btm_sec_l2cap_access_req (p_ccb->p_lcb->remote_bd_addr, psm,
+                                  p_ccb->p_lcb->handle, CONNLESS_TERM, &l2c_link_sec_comp, p_ccb);
+
+        return (TRUE);
+    }
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_send_pending_in_sec_q
+**
+**  Description     dequeue UCD packet from security pending queue and
+**                  send it to application
+**
+**  Return          None
+**
+*******************************************************************************/
+void l2c_ucd_send_pending_in_sec_q(tL2C_CCB  *p_ccb)
+{
+    BT_HDR *p_buf;
+
+    if ( p_ccb->p_lcb->ucd_in_sec_pending_q.count )
+    {
+        p_buf = (BT_HDR*)GKI_dequeue (&p_ccb->p_lcb->ucd_in_sec_pending_q);
+
+        p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Data_Cb(p_ccb->p_lcb->remote_bd_addr, (BT_HDR *)p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_discard_pending_in_sec_q
+**
+**  Description     dequeue UCD packet from security pending queue and
+**                  discard it.
+**
+**  Return          None
+**
+*******************************************************************************/
+void l2c_ucd_discard_pending_in_sec_q(tL2C_CCB  *p_ccb)
+{
+    BT_HDR *p_buf;
+
+    p_buf = (BT_HDR*)GKI_dequeue (&p_ccb->p_lcb->ucd_in_sec_pending_q);
+
+    if (p_buf)
+    {
+        GKI_freebuf (p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_check_rx_pkts
+**
+**  Description     Check if UCD reception is registered.
+**                  Process received UCD packet if application is expecting.
+**
+**  Return          TRUE if UCD reception is registered
+**
+*******************************************************************************/
+BOOLEAN l2c_ucd_check_rx_pkts(tL2C_LCB  *p_lcb, BT_HDR *p_msg)
+{
+    tL2C_CCB   *p_ccb;
+    tL2C_RCB   *p_rcb;
+
+    if (((p_ccb = l2cu_find_ccb_by_cid (p_lcb, L2CAP_CONNECTIONLESS_CID)) != NULL)
+      ||((p_rcb = l2cu_find_rcb_by_psm (L2C_UCD_RCB_ID)) != NULL))
+    {
+        if (p_ccb == NULL)
+        {
+            /* Allocate a channel control block */
+            if ((p_ccb = l2cu_allocate_ccb (p_lcb, 0)) == NULL)
+            {
+                L2CAP_TRACE_WARNING0 ("L2CAP - no CCB for UCD reception");
+                GKI_freebuf (p_msg);
+                return TRUE;
+            }
+            else
+            {
+                /* Set CID for the connection */
+                p_ccb->local_cid  = L2CAP_CONNECTIONLESS_CID;
+                p_ccb->remote_cid = L2CAP_CONNECTIONLESS_CID;
+
+                /* Set the default idle timeout value to use */
+                p_ccb->fixed_chnl_idle_tout = L2CAP_UCD_IDLE_TIMEOUT;
+
+                /* Set the default channel priority value to use */
+                l2cu_change_pri_ccb (p_ccb, L2CAP_UCD_CH_PRIORITY);
+
+                /* Save registration info */
+                p_ccb->p_rcb = p_rcb;
+
+                p_ccb->chnl_state = CST_OPEN;
+            }
+        }
+        l2c_csm_execute(p_ccb, L2CEVT_L2CAP_DATA, p_msg);
+        return TRUE;
+    }
+    else
+        return FALSE;
+}
+
+/*******************************************************************************
+**
+**  Function        l2c_ucd_process_event
+**
+**  Description     This is called from main state machine when LCID is connectionless
+**                  Process the event if it is for UCD.
+**
+**  Return          TRUE if the event is consumed by UCD
+**                  FALSE if the event needs to be processed by main state machine
+**
+*******************************************************************************/
+BOOLEAN l2c_ucd_process_event(tL2C_CCB *p_ccb, UINT16 event, void *p_data)
+{
+    /* if the event is not processed by this function, this variable will be set to FALSE */
+    BOOLEAN done = TRUE;
+
+    switch (p_ccb->chnl_state)
+    {
+    case CST_CLOSED:
+        switch (event)
+        {
+        case L2CEVT_LP_CONNECT_CFM:     /* Link came up         */
+            /* check if waiting for UCD info */
+            if (!l2c_ucd_check_pending_info_req (p_ccb))
+            {
+                /* check if any outgoing UCD packet is waiting security check */
+                if (!l2c_ucd_check_pending_out_sec_q(p_ccb))
+                {
+                    p_ccb->chnl_state = CST_OPEN;
+                }
+            }
+            break;
+
+        case L2CEVT_L2CAP_DATA:         /* Peer data packet rcvd    */
+            GKI_enqueue (&p_ccb->p_lcb->ucd_in_sec_pending_q, p_data);
+            break;
+
+        case L2CEVT_L2CA_DATA_WRITE:    /* Upper layer data to send */
+            l2c_ucd_enqueue_pending_out_sec_q(p_ccb, p_data);
+            break;
+
+        case L2CEVT_L2CAP_INFO_RSP:
+            /* check if waiting for UCD info */
+            if (!l2c_ucd_check_pending_info_req (p_ccb))
+            {
+                /* check if any outgoing UCD packet is waiting security check */
+                if (!l2c_ucd_check_pending_out_sec_q(p_ccb))
+                {
+                    p_ccb->chnl_state = CST_OPEN;
+                }
+            }
+            break;
+
+        default:
+            done = FALSE;   /* main state machine continues to process event */
+            break;
+        }
+        break;
+
+    case CST_ORIG_W4_SEC_COMP:
+        switch (event)
+        {
+        case L2CEVT_SEC_RE_SEND_CMD:    /* BTM has enough info to proceed */
+            /* check if any outgoing UCD packet is waiting security check */
+            if (!l2c_ucd_check_pending_out_sec_q(p_ccb))
+            {
+                p_ccb->chnl_state = CST_OPEN;
+            }
+            break;
+
+        case L2CEVT_SEC_COMP:           /* Security completed success */
+            p_ccb->chnl_state = CST_OPEN;
+            l2c_ucd_send_pending_out_sec_q(p_ccb);
+
+            if ( p_ccb->p_lcb->ucd_out_sec_pending_q.count )
+            {
+                /* start a timer to send next UCD packet in OPEN state */
+                /* it will prevent stack overflow */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, 0);
+            }
+            else
+            {
+                /* start a timer for idle timeout of UCD */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, p_ccb->fixed_chnl_idle_tout);
+            }
+            break;
+
+        case L2CEVT_SEC_COMP_NEG:
+            p_ccb->chnl_state = CST_OPEN;
+            l2c_ucd_discard_pending_out_sec_q(p_ccb);
+
+            /* start a timer for idle timeout of UCD */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, p_ccb->fixed_chnl_idle_tout);
+            break;
+
+        case L2CEVT_L2CA_DATA_WRITE:    /* Upper layer data to send */
+            l2c_ucd_enqueue_pending_out_sec_q(p_ccb, p_data);
+            break;
+
+        case L2CEVT_L2CAP_DATA:         /* Peer data packet rcvd    */
+            GKI_enqueue (&p_ccb->p_lcb->ucd_in_sec_pending_q, p_data);
+            break;
+
+        case L2CEVT_L2CAP_INFO_RSP:
+            /* check if waiting for UCD info */
+            l2c_ucd_check_pending_info_req (p_ccb);
+            break;
+
+        default:
+            done = FALSE;   /* main state machine continues to process event */
+            break;
+        }
+        break;
+
+
+    case CST_TERM_W4_SEC_COMP:
+        switch (event)
+        {
+        case L2CEVT_SEC_COMP:
+            p_ccb->chnl_state = CST_OPEN;
+            l2c_ucd_send_pending_in_sec_q (p_ccb);
+
+            if ( p_ccb->p_lcb->ucd_in_sec_pending_q.count )
+            {
+                /* start a timer to check next UCD packet in OPEN state */
+                /* it will prevent stack overflow */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, 0);
+            }
+            else
+            {
+                /* start a timer for idle timeout of UCD */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, p_ccb->fixed_chnl_idle_tout);
+            }
+            break;
+
+        case L2CEVT_SEC_COMP_NEG:
+            if (((tL2C_CONN_INFO *)p_data)->status == BTM_DELAY_CHECK)
+            {
+                done = FALSE;
+                break;
+            }
+            p_ccb->chnl_state = CST_OPEN;
+            l2c_ucd_discard_pending_in_sec_q (p_ccb);
+
+            /* start a timer for idle timeout of UCD */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_L2CAP_CHNL, p_ccb->fixed_chnl_idle_tout);
+            break;
+
+        case L2CEVT_L2CA_DATA_WRITE:        /* Upper layer data to send */
+            l2c_ucd_enqueue_pending_out_sec_q(p_ccb, p_data);
+            break;
+
+        case L2CEVT_L2CAP_DATA:             /* Peer data packet rcvd    */
+            GKI_enqueue (&p_ccb->p_lcb->ucd_in_sec_pending_q, p_data);
+            break;
+
+        case L2CEVT_SEC_RE_SEND_CMD:        /* BTM has enough info to proceed */
+            /* check if any incoming UCD packet is waiting security check */
+            if (!l2c_ucd_check_pending_in_sec_q(p_ccb))
+            {
+                p_ccb->chnl_state = CST_OPEN;
+            }
+            break;
+
+        case L2CEVT_L2CAP_INFO_RSP:
+            /* check if waiting for UCD info */
+            l2c_ucd_check_pending_info_req (p_ccb);
+            break;
+
+        default:
+            done = FALSE;   /* main state machine continues to process event */
+            break;
+        }
+        break;
+
+    case CST_OPEN:
+        switch (event)
+        {
+        case L2CEVT_L2CAP_DATA:             /* Peer data packet rcvd    */
+            /* stop idle timer of UCD */
+            btu_stop_timer (&p_ccb->timer_entry);
+
+            GKI_enqueue (&p_ccb->p_lcb->ucd_in_sec_pending_q, p_data);
+            l2c_ucd_check_pending_in_sec_q (p_ccb);
+            break;
+
+        case L2CEVT_L2CA_DATA_WRITE:        /* Upper layer data to send */
+            /* stop idle timer of UCD */
+            btu_stop_timer (&p_ccb->timer_entry);
+
+            l2c_ucd_enqueue_pending_out_sec_q(p_ccb, p_data);
+
+            /* coverity[check_return] */ /* coverity[unchecked_value] */
+            /* success changes state, failure stays in current state */
+            l2c_ucd_check_pending_out_sec_q (p_ccb);
+            break;
+
+        case L2CEVT_TIMEOUT:
+            /* check if any UCD packet is waiting security check */
+            if ((!l2c_ucd_check_pending_in_sec_q(p_ccb))
+              &&(!l2c_ucd_check_pending_out_sec_q(p_ccb)))
+            {
+                l2cu_release_ccb (p_ccb);
+            }
+            break;
+
+        case L2CEVT_L2CAP_INFO_RSP:
+            /* check if waiting for UCD info */
+            l2c_ucd_check_pending_info_req (p_ccb);
+            break;
+
+        default:
+            done = FALSE;   /* main state machine continues to process event */
+            break;
+        }
+        break;
+
+    default:
+        done = FALSE;   /* main state machine continues to process event */
+        break;
+    }
+
+    return done;
+}
+#endif /* (L2CAP_UCD_INCLUDED == TRUE) */
diff --git a/stack/l2cap/l2c_utils.c b/stack/l2cap/l2c_utils.c
new file mode 100644
index 0000000..fd618ed
--- /dev/null
+++ b/stack/l2cap/l2c_utils.c
@@ -0,0 +1,3406 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains L2CAP utility functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "hcimsgs.h"
+#include "l2cdefs.h"
+#include "l2c_int.h"
+#include "hcidefs.h"
+#include "btu.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "hcidefs.h"
+
+/*******************************************************************************
+**
+** Function         l2cu_allocate_lcb
+**
+** Description      Look for an unused LCB
+**
+** Returns          LCB address or NULL if none found
+**
+*******************************************************************************/
+tL2C_LCB *l2cu_allocate_lcb (BD_ADDR p_bd_addr, BOOLEAN is_bonding)
+{
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if (!p_lcb->in_use)
+        {
+            memset (p_lcb, 0, sizeof (tL2C_LCB));
+
+            memcpy (p_lcb->remote_bd_addr, p_bd_addr, BD_ADDR_LEN);
+
+            p_lcb->in_use          = TRUE;
+            p_lcb->link_state      = LST_DISCONNECTED;
+            p_lcb->handle          = HCI_INVALID_HANDLE;
+            p_lcb->link_flush_tout = 0xFFFF;
+            p_lcb->timer_entry.param = (TIMER_PARAM_TYPE)p_lcb;
+            p_lcb->info_timer_entry.param = (TIMER_PARAM_TYPE)p_lcb;
+            p_lcb->idle_timeout    = l2cb.idle_timeout;
+            p_lcb->id              = 1;                     /* spec does not allow '0' */
+            p_lcb->is_bonding      = is_bonding;
+
+            l2cb.num_links_active++;
+
+            l2c_link_adjust_allocation();
+            return (p_lcb);
+        }
+    }
+
+    /* If here, no free LCB found */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_update_lcb_4_bonding
+**
+** Description      Mark the lcb for bonding. Used when bonding takes place on
+**                  an existing ACL connection.  (Pre-Lisbon devices)
+**
+** Returns          Nothing
+**
+*******************************************************************************/
+void l2cu_update_lcb_4_bonding (BD_ADDR p_bd_addr, BOOLEAN is_bonding)
+{
+    tL2C_LCB    *p_lcb = l2cu_find_lcb_by_bd_addr (p_bd_addr);
+
+    if (p_lcb)
+    {
+        L2CAP_TRACE_DEBUG3 ("l2cu_update_lcb_4_bonding  BDA: %08x%04x is_bonding: %d",
+                          (p_bd_addr[0]<<24)+(p_bd_addr[1]<<16)+(p_bd_addr[2]<<8)+p_bd_addr[3],
+                          (p_bd_addr[4]<<8)+p_bd_addr[5], is_bonding);
+        p_lcb->is_bonding = is_bonding;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_release_lcb
+**
+** Description      Release an LCB. All timers will be stopped, channels
+**                  dropped, buffers returned etc.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_release_lcb (tL2C_LCB *p_lcb)
+{
+    tL2C_CCB    *p_ccb;
+
+    p_lcb->in_use     = FALSE;
+    p_lcb->is_bonding = FALSE;
+
+    /* Stop timers */
+    btu_stop_timer (&p_lcb->timer_entry);
+    btu_stop_timer (&p_lcb->info_timer_entry);
+
+    /* Release any unfinished L2CAP packet on this link */
+    if (p_lcb->p_hcit_rcv_acl)
+    {
+        GKI_freebuf(p_lcb->p_hcit_rcv_acl);
+        p_lcb->p_hcit_rcv_acl = NULL;
+    }
+
+#if BTM_SCO_INCLUDED == TRUE
+    /* Release all SCO links */
+    btm_remove_sco_links(p_lcb->remote_bd_addr);
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+    p_lcb->is_ble_link = FALSE;
+    l2cb.is_ble_connecting = FALSE;
+#endif
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    {
+        int         xx;
+
+        for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+        {
+            if (p_lcb->p_fixed_ccbs[xx])
+            {
+                l2cu_release_ccb (p_lcb->p_fixed_ccbs[xx]);
+                p_lcb->p_fixed_ccbs[xx] = NULL;
+                (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, FALSE, p_lcb->disc_reason);
+            }
+            else if ( (p_lcb->peer_chnl_mask[0] & (1 << (xx + L2CAP_FIRST_FIXED_CHNL)))
+                   && (l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb != NULL) )
+                    (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, FALSE, p_lcb->disc_reason);
+        }
+    }
+#endif
+
+    /* Ensure no CCBs left on this LCB */
+    for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_lcb->ccb_queue.p_first_ccb)
+    {
+        l2cu_release_ccb (p_ccb);
+    }
+
+    /* Tell BTM Acl management the link was removed */
+    if ((p_lcb->link_state == LST_CONNECTED) || (p_lcb->link_state == LST_DISCONNECTING))
+        btm_acl_removed (p_lcb->remote_bd_addr);
+
+    /* Release any held buffers */
+    while (p_lcb->link_xmit_data_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_lcb->link_xmit_data_q));
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    /* clean up any security pending UCD */
+    l2c_ucd_delete_sec_pending_q(p_lcb);
+#endif
+
+    /* Re-adjust flow control windows make sure it does not go negative */
+    if (l2cb.num_links_active >= 1)
+        l2cb.num_links_active--;
+
+    l2c_link_adjust_allocation();
+
+    /* Check for ping outstanding */
+    if (p_lcb->p_echo_rsp_cb)
+    {
+        tL2CA_ECHO_RSP_CB *p_cb = p_lcb->p_echo_rsp_cb;
+
+        /* Zero out the callback in case app immediately calls us again */
+        p_lcb->p_echo_rsp_cb = NULL;
+
+        (*p_cb) (L2CAP_PING_RESULT_NO_LINK);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_find_lcb_by_bd_addr
+**
+** Description      Look through all active LCBs for a match based on the
+**                  remote BD address.
+**
+** Returns          pointer to matched LCB, or NULL if no match
+**
+*******************************************************************************/
+tL2C_LCB  *l2cu_find_lcb_by_bd_addr (BD_ADDR p_bd_addr)
+{
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (!memcmp (p_lcb->remote_bd_addr, p_bd_addr, BD_ADDR_LEN)))
+        {
+            return (p_lcb);
+        }
+    }
+
+    /* If here, no match found */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_get_conn_role
+**
+** Description      Determine the desired role (master or slave) of a link.
+**                  If already got a slave link, this one must be a master. If
+**                  already got at least 1 link where we are the master, make this
+**                  also a master.
+**
+** Returns          HCI_ROLE_MASTER or HCI_ROLE_SLAVE
+**
+*******************************************************************************/
+UINT8 l2cu_get_conn_role (tL2C_LCB *p_this_lcb)
+{
+    return l2cb.desire_role;
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_build_header
+**
+** Description      Builds the L2CAP command packet header
+**
+** Returns          Pointer to allocated packet or NULL if no resources
+**
+*******************************************************************************/
+BT_HDR *l2cu_build_header (tL2C_LCB *p_lcb, UINT16 len, UINT8 cmd, UINT8 id)
+{
+    BT_HDR  *p_buf = (BT_HDR *)GKI_getpoolbuf (L2CAP_CMD_POOL_ID);
+    UINT8   *p;
+
+    if (!p_buf)
+    {
+        L2CAP_TRACE_ERROR0 ("l2cu_build_header - no buffer");
+        return (NULL);
+    }
+
+    p_buf->offset = L2CAP_SEND_CMD_OFFSET;
+    p_buf->len = len + HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET;
+
+    /* Put in HCI header - handle + pkt boundary */
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    UINT16_TO_STREAM (p, p_lcb->handle | l2cb.non_flushable_pbf);
+#else
+    UINT16_TO_STREAM (p, (p_lcb->handle | (L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT)));
+#endif
+
+    UINT16_TO_STREAM (p, len + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD);
+    UINT16_TO_STREAM (p, len + L2CAP_CMD_OVERHEAD);
+
+#if (BLE_INCLUDED == TRUE)
+    if (p_lcb->is_ble_link)
+    {
+        UINT16_TO_STREAM (p, L2CAP_BLE_SIGNALLING_CID);
+    }
+    else
+#endif
+    {
+        UINT16_TO_STREAM (p, L2CAP_SIGNALLING_CID);
+    }
+
+    /* Put in L2CAP command header */
+    UINT8_TO_STREAM  (p, cmd);
+    UINT8_TO_STREAM  (p, id);
+    UINT16_TO_STREAM (p, len);
+
+    return (p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_adj_id
+**
+** Description      Checks for valid ID based on specified mask
+**                  and adjusts the id if invalid.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_adj_id (tL2C_LCB *p_lcb, UINT8 adj_mask)
+{
+#if (L2CAP_ENHANCED_FEATURES != 0)
+    if ((adj_mask & L2CAP_ADJ_BRCM_ID) && p_lcb->id == L2CAP_FEATURE_REQ_ID)
+    {
+        p_lcb->id++;
+    }
+#endif
+
+    if ((adj_mask & L2CAP_ADJ_ZERO_ID) && !p_lcb->id)
+    {
+        p_lcb->id++;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_cmd_reject
+**
+** Description      Build and send an L2CAP "command reject" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_cmd_reject (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id,
+                                UINT16 p1, UINT16 p2)
+{
+    UINT16  param_len;
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    /* Put in L2CAP packet header */
+    if (reason == L2CAP_CMD_REJ_MTU_EXCEEDED)
+        param_len = 2;
+    else if (reason == L2CAP_CMD_REJ_INVALID_CID)
+        param_len = 4;
+    else
+        param_len = 0;
+
+    if ((p_buf = l2cu_build_header (p_lcb, (UINT16) (L2CAP_CMD_REJECT_LEN + param_len), L2CAP_CMD_REJECT, rem_id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer cmd_rej");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, reason);
+
+    if (param_len >= 2)
+        UINT16_TO_STREAM (p, p1);
+
+    if (param_len >= 4)
+        UINT16_TO_STREAM (p, p2);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_connect_req
+**
+** Description      Build and send an L2CAP "connection request" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_connect_req (tL2C_CCB *p_ccb)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    /* Create an identifier for this packet */
+    p_ccb->p_lcb->id++;
+    l2cu_adj_id(p_ccb->p_lcb, L2CAP_ADJ_ID);
+
+    p_ccb->local_id = p_ccb->p_lcb->id;
+
+    if ((p_buf = l2cu_build_header (p_ccb->p_lcb, L2CAP_CONN_REQ_LEN, L2CAP_CMD_CONN_REQ,
+                                    p_ccb->local_id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for conn_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET+HCI_DATA_PREAMBLE_SIZE +
+        L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, p_ccb->p_rcb->real_psm);
+    UINT16_TO_STREAM (p, p_ccb->local_cid);
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_connect_rsp
+**
+** Description      Build and send an L2CAP "connection response" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_connect_rsp (tL2C_CCB *p_ccb, UINT16 result, UINT16 status)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    if (result == L2CAP_CONN_PENDING)
+    {
+        /* if we already sent pending response */
+        if (p_ccb->flags & CCB_FLAG_SENT_PENDING)
+            return;
+        else
+            p_ccb->flags |= CCB_FLAG_SENT_PENDING;
+    }
+
+    if ((p_buf=l2cu_build_header(p_ccb->p_lcb, L2CAP_CONN_RSP_LEN, L2CAP_CMD_CONN_RSP, p_ccb->remote_id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for conn_rsp");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET+HCI_DATA_PREAMBLE_SIZE +
+        L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, p_ccb->local_cid);
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    UINT16_TO_STREAM (p, result);
+    UINT16_TO_STREAM (p, status);
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_reject_connection
+**
+** Description      Build and send an L2CAP "connection response neg" message
+**                  to the peer. This function is called when there is no peer
+**                  CCB (non-existant PSM or no resources).
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_reject_connection (tL2C_LCB *p_lcb, UINT16 remote_cid, UINT8 rem_id, UINT16 result)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    if ((p_buf = l2cu_build_header(p_lcb, L2CAP_CONN_RSP_LEN, L2CAP_CMD_CONN_RSP, rem_id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for conn_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET+HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, 0);                    /* Local CID of 0   */
+    UINT16_TO_STREAM (p, remote_cid);
+    UINT16_TO_STREAM (p, result);
+    UINT16_TO_STREAM (p, 0);                    /* Status of 0      */
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_config_req
+**
+** Description      Build and send an L2CAP "configuration request" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_config_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    BT_HDR  *p_buf;
+    UINT16  cfg_len=0;
+    UINT8   *p;
+
+    /* Create an identifier for this packet */
+    p_ccb->p_lcb->id++;
+    l2cu_adj_id(p_ccb->p_lcb, L2CAP_ADJ_ID);
+
+    p_ccb->local_id = p_ccb->p_lcb->id;
+
+    if (p_cfg->mtu_present)
+        cfg_len += L2CAP_CFG_MTU_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->flush_to_present)
+        cfg_len += L2CAP_CFG_FLUSH_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->qos_present)
+        cfg_len += L2CAP_CFG_QOS_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->fcr_present)
+        cfg_len += L2CAP_CFG_FCR_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->fcs_present)
+        cfg_len += L2CAP_CFG_FCS_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->ext_flow_spec_present)
+        cfg_len += L2CAP_CFG_EXT_FLOW_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+
+    if ((p_buf = l2cu_build_header (p_ccb->p_lcb, (UINT16) (L2CAP_CONFIG_REQ_LEN + cfg_len),
+        L2CAP_CMD_CONFIG_REQ, p_ccb->local_id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for conn_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    UINT16_TO_STREAM (p, p_cfg->flags);                    /* Flags (continuation) */
+
+    /* Now, put the options */
+    if (p_cfg->mtu_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_MTU);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_MTU_OPTION_LEN);
+        UINT16_TO_STREAM (p, p_cfg->mtu);
+    }
+    if (p_cfg->flush_to_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_FLUSH_TOUT);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_FLUSH_OPTION_LEN);
+        UINT16_TO_STREAM (p, p_cfg->flush_to);
+    }
+    if (p_cfg->qos_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_QOS);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_QOS_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->qos.qos_flags);
+        UINT8_TO_STREAM  (p, p_cfg->qos.service_type);
+        UINT32_TO_STREAM (p, p_cfg->qos.token_rate);
+        UINT32_TO_STREAM (p, p_cfg->qos.token_bucket_size);
+        UINT32_TO_STREAM (p, p_cfg->qos.peak_bandwidth);
+        UINT32_TO_STREAM (p, p_cfg->qos.latency);
+        UINT32_TO_STREAM (p, p_cfg->qos.delay_variation);
+    }
+    if (p_cfg->fcr_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_FCR);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_FCR_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.mode);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.tx_win_sz);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.max_transmit);
+        UINT16_TO_STREAM (p, p_cfg->fcr.rtrans_tout);
+        UINT16_TO_STREAM (p, p_cfg->fcr.mon_tout);
+        UINT16_TO_STREAM (p, p_cfg->fcr.mps);
+    }
+
+    if (p_cfg->fcs_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_FCS);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_FCS_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->fcs);
+    }
+
+    if (p_cfg->ext_flow_spec_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_EXT_FLOW);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_EXT_FLOW_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->ext_flow_spec.id);
+        UINT8_TO_STREAM  (p, p_cfg->ext_flow_spec.stype);
+        UINT16_TO_STREAM (p, p_cfg->ext_flow_spec.max_sdu_size);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.sdu_inter_time);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.access_latency);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.flush_timeout);
+    }
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_config_rsp
+**
+** Description      Build and send an L2CAP "configuration response" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_config_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    BT_HDR  *p_buf;
+    UINT16  cfg_len = 0;
+    UINT8   *p;
+
+    /* Create an identifier for this packet */
+    if (p_cfg->mtu_present)
+        cfg_len += L2CAP_CFG_MTU_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->flush_to_present)
+        cfg_len += L2CAP_CFG_FLUSH_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->qos_present)
+        cfg_len += L2CAP_CFG_QOS_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->fcr_present)
+        cfg_len += L2CAP_CFG_FCR_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+    if (p_cfg->ext_flow_spec_present)
+        cfg_len += L2CAP_CFG_EXT_FLOW_OPTION_LEN + L2CAP_CFG_OPTION_OVERHEAD;
+
+    if ((p_buf = l2cu_build_header (p_ccb->p_lcb, (UINT16)(L2CAP_CONFIG_RSP_LEN + cfg_len),
+                                    L2CAP_CMD_CONFIG_RSP, p_ccb->remote_id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for conn_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET+HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    UINT16_TO_STREAM (p, p_cfg->flags);           /* Flags (continuation) Must match request */
+    UINT16_TO_STREAM (p, p_cfg->result);
+
+    /* Now, put the options */
+    if (p_cfg->mtu_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_MTU);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_MTU_OPTION_LEN);
+        UINT16_TO_STREAM (p, p_cfg->mtu);
+    }
+    if (p_cfg->flush_to_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_FLUSH_TOUT);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_FLUSH_OPTION_LEN);
+        UINT16_TO_STREAM (p, p_cfg->flush_to);
+    }
+    if (p_cfg->qos_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_QOS);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_QOS_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->qos.qos_flags);
+        UINT8_TO_STREAM  (p, p_cfg->qos.service_type);
+        UINT32_TO_STREAM (p, p_cfg->qos.token_rate);
+        UINT32_TO_STREAM (p, p_cfg->qos.token_bucket_size);
+        UINT32_TO_STREAM (p, p_cfg->qos.peak_bandwidth);
+        UINT32_TO_STREAM (p, p_cfg->qos.latency);
+        UINT32_TO_STREAM (p, p_cfg->qos.delay_variation);
+    }
+    if (p_cfg->fcr_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_FCR);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_FCR_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.mode);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.tx_win_sz);
+        UINT8_TO_STREAM  (p, p_cfg->fcr.max_transmit);
+        UINT16_TO_STREAM (p, p_ccb->our_cfg.fcr.rtrans_tout);
+        UINT16_TO_STREAM (p, p_ccb->our_cfg.fcr.mon_tout);
+        UINT16_TO_STREAM (p, p_cfg->fcr.mps);
+    }
+
+    if (p_cfg->ext_flow_spec_present)
+    {
+        UINT8_TO_STREAM  (p, L2CAP_CFG_TYPE_EXT_FLOW);
+        UINT8_TO_STREAM  (p, L2CAP_CFG_EXT_FLOW_OPTION_LEN);
+        UINT8_TO_STREAM  (p, p_cfg->ext_flow_spec.id);
+        UINT8_TO_STREAM  (p, p_cfg->ext_flow_spec.stype);
+        UINT16_TO_STREAM (p, p_cfg->ext_flow_spec.max_sdu_size);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.sdu_inter_time);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.access_latency);
+        UINT32_TO_STREAM (p, p_cfg->ext_flow_spec.flush_timeout);
+    }
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_config_rej
+**
+** Description      Build and send an L2CAP "configuration reject" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_config_rej (tL2C_CCB *p_ccb, UINT8 *p_data, UINT16 data_len, UINT16 rej_len)
+{
+    BT_HDR  *p_buf = (BT_HDR *)GKI_getpoolbuf (L2CAP_CMD_POOL_ID);
+    UINT16  len, cfg_len;
+    UINT8   *p, *p_hci_len, *p_data_end;
+    UINT8   cfg_code;
+
+    if (!p_buf)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP - no buffer for cfg_rej");
+        return;
+    }
+
+    p_buf->offset = L2CAP_SEND_CMD_OFFSET;
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET;
+
+    /* Put in HCI header - handle + pkt boundary */
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    if (HCI_NON_FLUSHABLE_PB_SUPPORTED(BTM_ReadLocalFeatures ()))
+    {
+        UINT16_TO_STREAM (p, (p_ccb->p_lcb->handle | (L2CAP_PKT_START_NON_FLUSHABLE << L2CAP_PKT_TYPE_SHIFT)));
+    }
+    else
+#endif
+    {
+        UINT16_TO_STREAM (p, (p_ccb->p_lcb->handle | (L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT)));
+    }
+
+    /* Remember the HCI header length position, and save space for it */
+    p_hci_len = p;
+    p += 2;
+
+    /* Put in L2CAP packet header */
+    UINT16_TO_STREAM (p, L2CAP_CMD_OVERHEAD + L2CAP_CONFIG_RSP_LEN + rej_len);
+    UINT16_TO_STREAM (p, L2CAP_SIGNALLING_CID);
+
+    /* Put in L2CAP command header */
+    UINT8_TO_STREAM  (p, L2CAP_CMD_CONFIG_RSP);
+    UINT8_TO_STREAM  (p, p_ccb->remote_id);
+
+    UINT16_TO_STREAM (p, L2CAP_CONFIG_RSP_LEN + rej_len);
+
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    UINT16_TO_STREAM (p, 0);                    /* Flags = 0 (no continuation) */
+    UINT16_TO_STREAM (p, L2CAP_CFG_UNKNOWN_OPTIONS);
+
+    /* Now, put the rejected options */
+    p_data_end = p_data + data_len;
+    while (p_data < p_data_end)
+    {
+        cfg_code = *p_data;
+        cfg_len = *(p_data + 1);
+
+        switch (cfg_code & 0x7F)
+        {
+            /* skip known options */
+            case L2CAP_CFG_TYPE_MTU:
+            case L2CAP_CFG_TYPE_FLUSH_TOUT:
+            case L2CAP_CFG_TYPE_QOS:
+                p_data += cfg_len + L2CAP_CFG_OPTION_OVERHEAD;
+                break;
+
+            /* unknown options; copy into rsp if not hints */
+            default:
+                /* sanity check option length */
+                if ((cfg_len + L2CAP_CFG_OPTION_OVERHEAD) <= data_len)
+                {
+                    if ((cfg_code & 0x80) == 0)
+                    {
+                        memcpy(p, p_data, cfg_len + L2CAP_CFG_OPTION_OVERHEAD);
+                        p += cfg_len + L2CAP_CFG_OPTION_OVERHEAD;
+                    }
+                    p_data += cfg_len + L2CAP_CFG_OPTION_OVERHEAD;
+                }
+                /* bad length; force loop exit */
+                else
+                {
+                    p_data = p_data_end;
+                }
+                break;
+        }
+    }
+
+    len = (UINT16) (p - p_hci_len - 2);
+    UINT16_TO_STREAM (p_hci_len, len);
+
+    p_buf->len = len + 4;
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_disc_req
+**
+** Description      Build and send an L2CAP "disconnect request" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_disc_req (tL2C_CCB *p_ccb)
+{
+    BT_HDR  *p_buf, *p_buf2;
+    UINT8   *p;
+
+    /* Create an identifier for this packet */
+    p_ccb->p_lcb->id++;
+    l2cu_adj_id(p_ccb->p_lcb, L2CAP_ADJ_ID);
+
+    p_ccb->local_id = p_ccb->p_lcb->id;
+
+    if ((p_buf = l2cu_build_header(p_ccb->p_lcb, L2CAP_DISC_REQ_LEN, L2CAP_CMD_DISC_REQ, p_ccb->local_id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for disc_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, p_ccb->remote_cid);
+    UINT16_TO_STREAM (p, p_ccb->local_cid);
+
+    /* Move all queued data packets to the LCB. In FCR mode, assume the higher
+       layer checks that all buffers are sent before disconnecting.
+    */
+    if (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE)
+    {
+        while (p_ccb->xmit_hold_q.p_first)
+        {
+            p_buf2 = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_hold_q);
+            l2cu_set_acl_hci_header (p_buf2, p_ccb);
+            l2c_link_check_send_pkts (p_ccb->p_lcb, p_ccb, p_buf2);
+        }
+    }
+
+    l2c_link_check_send_pkts (p_ccb->p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_disc_rsp
+**
+** Description      Build and send an L2CAP "disconnect response" message
+**                  to the peer.
+**
+**                  This function is passed the parameters for the disconnect
+**                  response instead of the CCB address, as it may be called
+**                  to send a disconnect response when there is no CCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_disc_rsp (tL2C_LCB *p_lcb, UINT8 remote_id, UINT16 local_cid,
+                              UINT16 remote_cid)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    if ((p_buf=l2cu_build_header(p_lcb, L2CAP_DISC_RSP_LEN, L2CAP_CMD_DISC_RSP, remote_id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for disc_rsp");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, local_cid);
+    UINT16_TO_STREAM (p, remote_cid);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_echo_req
+**
+** Description      Build and send an L2CAP "echo request" message
+**                  to the peer. Note that we do not currently allow
+**                  data in the echo request.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_echo_req (tL2C_LCB *p_lcb, UINT8 *p_data, UINT16 data_len)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    p_lcb->id++;
+    l2cu_adj_id(p_lcb, L2CAP_ADJ_ZERO_ID);  /* check for wrap to '0' */
+
+    if ((p_buf = l2cu_build_header(p_lcb, (UINT16) (L2CAP_ECHO_REQ_LEN + data_len), L2CAP_CMD_ECHO_REQ, p_lcb->id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for echo_req");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    if (data_len)
+    {
+        ARRAY_TO_STREAM  (p, p_data, data_len);
+    }
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_echo_rsp
+**
+** Description      Build and send an L2CAP "echo response" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_echo_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+    UINT16   maxlen;
+
+    /* Don't return data if it does not fit in ACL and L2CAP MTU */
+    maxlen = (GKI_get_pool_bufsize(L2CAP_CMD_POOL_ID) > btu_cb.hcit_acl_pkt_size) ?
+               btu_cb.hcit_acl_data_size : (UINT16)GKI_get_pool_bufsize(L2CAP_CMD_POOL_ID);
+    maxlen -= (UINT16)(BT_HDR_SIZE + HCI_DATA_PREAMBLE_SIZE + L2CAP_PKT_OVERHEAD +
+                L2CAP_CMD_OVERHEAD + L2CAP_ECHO_RSP_LEN);
+
+    if (data_len > maxlen)
+        data_len = 0;
+
+    if ((p_buf = l2cu_build_header (p_lcb, (UINT16)(L2CAP_ECHO_RSP_LEN + data_len), L2CAP_CMD_ECHO_RSP, id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for echo_rsp");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    if (data_len)
+    {
+        ARRAY_TO_STREAM  (p, p_data, data_len);
+    }
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_info_req
+**
+** Description      Build and send an L2CAP "info request" message
+**                  to the peer.
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_info_req (tL2C_LCB *p_lcb, UINT16 info_type)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    /* check for wrap and/or BRCM ID */
+    p_lcb->id++;
+    l2cu_adj_id(p_lcb, L2CAP_ADJ_ID);
+
+    if ((p_buf = l2cu_build_header(p_lcb, 2, L2CAP_CMD_INFO_REQ, p_lcb->id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for info_req");
+        return;
+    }
+
+    L2CAP_TRACE_EVENT1 ("l2cu_send_peer_info_req: type 0x%04x", info_type);
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET+HCI_DATA_PREAMBLE_SIZE +
+        L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, info_type);
+
+    p_lcb->w4_info_rsp = TRUE;
+    btu_start_timer (&p_lcb->info_timer_entry, BTU_TTYPE_L2CAP_INFO, L2CAP_WAIT_INFO_RSP_TOUT);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_info_rsp
+**
+** Description      Build and send an L2CAP "info response" message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_info_rsp (tL2C_LCB *p_lcb, UINT8 remote_id, UINT16 info_type)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+    UINT16   len = L2CAP_INFO_RSP_LEN;
+
+#if (L2CAP_CONFORMANCE_TESTING == TRUE)
+    if ((info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
+        && (l2cb.test_info_resp & (L2CAP_EXTFEA_ENH_RETRANS   | L2CAP_EXTFEA_STREAM_MODE |
+                                   L2CAP_EXTFEA_NO_CRC | L2CAP_EXTFEA_EXT_FLOW_SPEC |
+                                   L2CAP_EXTFEA_FIXED_CHNLS | L2CAP_EXTFEA_EXT_WINDOW |
+                                   L2CAP_EXTFEA_UCD_RECEPTION )) )
+#else
+    if ((info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
+        && (L2CAP_EXTFEA_SUPPORTED_MASK & (L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE |
+                                           L2CAP_EXTFEA_NO_CRC |L2CAP_EXTFEA_FIXED_CHNLS |
+                                           L2CAP_EXTFEA_UCD_RECEPTION )) )
+#endif
+    {
+        len += L2CAP_EXTENDED_FEATURES_ARRAY_SIZE;
+    }
+    else if (info_type == L2CAP_FIXED_CHANNELS_INFO_TYPE)
+    {
+        len += L2CAP_FIXED_CHNL_ARRAY_SIZE;
+    }
+    else if (info_type == L2CAP_CONNLESS_MTU_INFO_TYPE)
+    {
+        len += L2CAP_CONNLESS_MTU_INFO_SIZE;
+    }
+
+    if ((p_buf = l2cu_build_header(p_lcb, len, L2CAP_CMD_INFO_RSP, remote_id)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no buffer for info_rsp");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, info_type);
+
+#if (L2CAP_CONFORMANCE_TESTING == TRUE)
+    if ((info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
+        && (l2cb.test_info_resp & ( L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE
+                                  | L2CAP_EXTFEA_UCD_RECEPTION )) )
+#else
+    if ((info_type == L2CAP_EXTENDED_FEATURES_INFO_TYPE)
+        && (L2CAP_EXTFEA_SUPPORTED_MASK & ( L2CAP_EXTFEA_ENH_RETRANS | L2CAP_EXTFEA_STREAM_MODE
+                                          | L2CAP_EXTFEA_UCD_RECEPTION )) )
+#endif
+    {
+        UINT16_TO_STREAM (p, L2CAP_INFO_RESP_RESULT_SUCCESS);
+#if (BLE_INCLUDED == TRUE)
+        if (p_lcb->is_ble_link)
+        {
+            /* optional data are not added for now */
+            UINT32_TO_STREAM (p, L2CAP_BLE_EXTFEA_MASK);
+        }
+        else
+#endif
+        {
+#if L2CAP_CONFORMANCE_TESTING == TRUE
+        UINT32_TO_STREAM (p, l2cb.test_info_resp);
+#else
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+        UINT32_TO_STREAM (p, L2CAP_EXTFEA_SUPPORTED_MASK | L2CAP_EXTFEA_FIXED_CHNLS);
+#else
+        UINT32_TO_STREAM (p, L2CAP_EXTFEA_SUPPORTED_MASK);
+#endif
+#endif
+        }
+    }
+    else if (info_type == L2CAP_FIXED_CHANNELS_INFO_TYPE)
+    {
+        UINT16_TO_STREAM (p, L2CAP_INFO_RESP_RESULT_SUCCESS);
+        memset (p, 0, L2CAP_FIXED_CHNL_ARRAY_SIZE);
+
+        p[0] = L2CAP_FIXED_CHNL_SIG_BIT;
+
+        if ( L2CAP_EXTFEA_SUPPORTED_MASK & L2CAP_EXTFEA_UCD_RECEPTION )
+        	p[0] |= L2CAP_FIXED_CHNL_CNCTLESS_BIT;
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+        {
+            int xx;
+
+            for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+                if (l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb != NULL)
+                    p[0] |= 1 << (xx + L2CAP_FIRST_FIXED_CHNL);
+        }
+#endif
+    }
+    else if (info_type == L2CAP_CONNLESS_MTU_INFO_TYPE)
+    {
+        UINT16_TO_STREAM (p, L2CAP_INFO_RESP_RESULT_SUCCESS);
+        UINT16_TO_STREAM (p, L2CAP_UCD_MTU);
+    }
+    else
+    {
+        UINT16_TO_STREAM (p, L2CAP_INFO_RESP_RESULT_NOT_SUPPORTED);  /* 'not supported' */
+    }
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+/******************************************************************************
+**
+** Function         l2cu_enqueue_ccb
+**
+** Description      queue CCB by priority. The first CCB is highest priority and
+**                  is served at first. The CCB is queued to an LLCB or an LCB.
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2cu_enqueue_ccb (tL2C_CCB *p_ccb)
+{
+    tL2C_CCB        *p_ccb1;
+    tL2C_CCB_Q      *p_q = NULL;
+
+    /* Find out which queue the channel is on
+    */
+    if (p_ccb->p_lcb != NULL)
+        p_q = &p_ccb->p_lcb->ccb_queue;
+
+    if ( (!p_ccb->in_use) || (p_q == NULL) )
+    {
+        L2CAP_TRACE_ERROR3 ("l2cu_enqueue_ccb  CID: 0x%04x ERROR in_use: %u  p_lcb: 0x%08x",
+                            p_ccb->local_cid, p_ccb->in_use, p_ccb->p_lcb);
+        return;
+    }
+
+    L2CAP_TRACE_DEBUG2 ("l2cu_enqueue_ccb CID: 0x%04x  priority: %d",
+                        p_ccb->local_cid, p_ccb->ccb_priority);
+
+    /* If the queue is empty, we go at the front */
+    if (!p_q->p_first_ccb)
+    {
+        p_q->p_first_ccb  = p_q->p_last_ccb   = p_ccb;
+        p_ccb->p_next_ccb = p_ccb->p_prev_ccb = NULL;
+    }
+    else
+    {
+        p_ccb1 = p_q->p_first_ccb;
+
+        while (p_ccb1 != NULL)
+        {
+            /* Insert new ccb at the end of the same priority. Lower number, higher priority */
+            if (p_ccb->ccb_priority < p_ccb1->ccb_priority)
+            {
+                /* Are we at the head of the queue ? */
+                if (p_ccb1 == p_q->p_first_ccb)
+                    p_q->p_first_ccb = p_ccb;
+                else
+                    p_ccb1->p_prev_ccb->p_next_ccb  = p_ccb;
+
+                p_ccb->p_next_ccb  = p_ccb1;
+                p_ccb->p_prev_ccb  = p_ccb1->p_prev_ccb;
+                p_ccb1->p_prev_ccb = p_ccb;
+                break;
+            }
+
+            p_ccb1 = p_ccb1->p_next_ccb;
+        }
+
+        /* If we are lower then anyone in the list, we go at the end */
+        if (!p_ccb1)
+        {
+            /* add new ccb at the end of the list */
+            p_q->p_last_ccb->p_next_ccb = p_ccb;
+
+            p_ccb->p_next_ccb   = NULL;
+            p_ccb->p_prev_ccb   = p_q->p_last_ccb;
+            p_q->p_last_ccb = p_ccb;
+        }
+    }
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+    /* Adding CCB into round robin service table of its LCB */
+    if (p_ccb->p_lcb != NULL)
+    {
+        /* if this is the first channel in this priority group */
+        if (p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb == 0 )
+        {
+        	/* Set the first channel to this CCB */
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb = p_ccb;
+        	/* Set the next serving channel in this group to this CCB */
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb = p_ccb;
+        	/* Initialize quota of this priority group based on its priority */
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].quota = L2CAP_GET_PRIORITY_QUOTA(p_ccb->ccb_priority);
+        }
+        /* increase number of channels in this group */
+        p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb++;
+    }
+#endif
+
+}
+
+/******************************************************************************
+**
+** Function         l2cu_dequeue_ccb
+**
+** Description      dequeue CCB from a queue
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2cu_dequeue_ccb (tL2C_CCB *p_ccb)
+{
+    tL2C_CCB_Q      *p_q = NULL;
+
+    L2CAP_TRACE_DEBUG1 ("l2cu_dequeue_ccb  CID: 0x%04x", p_ccb->local_cid);
+
+    /* Find out which queue the channel is on
+    */
+    if (p_ccb->p_lcb != NULL)
+        p_q = &p_ccb->p_lcb->ccb_queue;
+
+    if ( (!p_ccb->in_use) || (p_q == NULL) || (p_q->p_first_ccb == NULL) )
+    {
+        L2CAP_TRACE_ERROR5 ("l2cu_dequeue_ccb  CID: 0x%04x ERROR in_use: %u  p_lcb: 0x%08x  p_q: 0x%08x  p_q->p_first_ccb: 0x%08x",
+                            p_ccb->local_cid, p_ccb->in_use, p_ccb->p_lcb, p_q, p_q ? p_q->p_first_ccb : 0);
+        return;
+    }
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+    /* Removing CCB from round robin service table of its LCB */
+    if (p_ccb->p_lcb != NULL)
+    {
+        /* decrease number of channels in this priority group */
+        p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb--;
+
+        /* if it was the last channel in the priority group */
+        if (p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb == 0 )
+        {
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb = NULL;
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb = NULL;
+        }
+        else
+        {
+            /* if it is the first channel of this group */
+            if ( p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb == p_ccb )
+            {
+                p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb = p_ccb->p_next_ccb;
+            }
+            /* if it is the next serving channel of this group */
+            if ( p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb == p_ccb )
+            {
+                /* simply, start serving from the first channel */
+                p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb
+                    = p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb;
+            }
+        }
+    }
+#endif
+
+    if (p_ccb == p_q->p_first_ccb)
+    {
+        /* We are removing the first in a queue */
+        p_q->p_first_ccb = p_ccb->p_next_ccb;
+
+        if (p_q->p_first_ccb)
+            p_q->p_first_ccb->p_prev_ccb = NULL;
+        else
+            p_q->p_last_ccb = NULL;
+    }
+    else if (p_ccb == p_q->p_last_ccb)
+    {
+        /* We are removing the last in a queue */
+        p_q->p_last_ccb = p_ccb->p_prev_ccb;
+        p_q->p_last_ccb->p_next_ccb = NULL;
+    }
+    else
+    {
+        /* In the middle of a chain. */
+        p_ccb->p_prev_ccb->p_next_ccb = p_ccb->p_next_ccb;
+        p_ccb->p_next_ccb->p_prev_ccb = p_ccb->p_prev_ccb;
+    }
+
+    p_ccb->p_next_ccb = p_ccb->p_prev_ccb = NULL;
+}
+
+/******************************************************************************
+**
+** Function         l2cu_change_pri_ccb
+**
+** Description
+**
+** Returns          -
+**
+*******************************************************************************/
+void l2cu_change_pri_ccb (tL2C_CCB *p_ccb, tL2CAP_CHNL_PRIORITY priority)
+{
+    if (p_ccb->ccb_priority != priority)
+    {
+        /* If CCB is not the only guy on the queue */
+        if ( (p_ccb->p_next_ccb != NULL) || (p_ccb->p_prev_ccb != NULL) )
+        {
+            L2CAP_TRACE_DEBUG0 ("Update CCB list in logical link");
+
+            /* Remove CCB from queue and re-queue it at new priority */
+            l2cu_dequeue_ccb (p_ccb);
+
+            p_ccb->ccb_priority = priority;
+            l2cu_enqueue_ccb (p_ccb);
+        }
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+        else
+        {
+        	/* If CCB is the only guy on the queue, no need to re-enqueue */
+            /* update only round robin service data */
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb = 0;
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb = NULL;
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb = NULL;
+
+            p_ccb->ccb_priority = priority;
+
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_first_ccb = p_ccb;
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].p_serve_ccb = p_ccb;
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].quota = L2CAP_GET_PRIORITY_QUOTA(p_ccb->ccb_priority);
+            p_ccb->p_lcb->rr_serv[p_ccb->ccb_priority].num_ccb = 1;
+        }
+#endif
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_allocate_ccb
+**
+** Description      This function allocates a Channel Control Block and
+**                  attaches it to a link control block. The local CID
+**                  is also assigned.
+**
+** Returns          pointer to CCB, or NULL if none
+**
+*******************************************************************************/
+tL2C_CCB *l2cu_allocate_ccb (tL2C_LCB *p_lcb, UINT16 cid)
+{
+    tL2C_CCB    *p_ccb;
+    tL2C_CCB    *p_prev;
+
+    L2CAP_TRACE_DEBUG1 ("l2cu_allocate_ccb: cid 0x%04x", cid);
+
+    if (!l2cb.p_free_ccb_first)
+        return (NULL);
+
+    /* If a CID was passed in, use that, else take the first free one */
+    if (cid == 0)
+    {
+        p_ccb = l2cb.p_free_ccb_first;
+        l2cb.p_free_ccb_first = p_ccb->p_next_ccb;
+    }
+    else
+    {
+        p_prev = NULL;
+
+        p_ccb = &l2cb.ccb_pool[cid - L2CAP_BASE_APPL_CID];
+
+        if (p_ccb == l2cb.p_free_ccb_first)
+            l2cb.p_free_ccb_first = p_ccb->p_next_ccb;
+        else
+        {
+            for (p_prev = l2cb.p_free_ccb_first; p_prev != NULL; p_prev = p_prev->p_next_ccb)
+            {
+                if (p_prev->p_next_ccb == p_ccb)
+                {
+                    p_prev->p_next_ccb = p_ccb->p_next_ccb;
+
+                    if (p_ccb == l2cb.p_free_ccb_last)
+                        l2cb.p_free_ccb_last = p_prev;
+
+                    break;
+                }
+            }
+            if (p_prev == NULL)
+            {
+                L2CAP_TRACE_ERROR1 ("l2cu_allocate_ccb: could not find CCB for CID 0x%04x in the free list", cid);
+                return NULL;
+            }
+        }
+    }
+
+    p_ccb->p_next_ccb = p_ccb->p_prev_ccb = NULL;
+
+    p_ccb->in_use = TRUE;
+
+    /* Get a CID for the connection */
+    p_ccb->local_cid = L2CAP_BASE_APPL_CID + (UINT16)(p_ccb - l2cb.ccb_pool);
+
+    p_ccb->p_lcb = p_lcb;
+    p_ccb->p_rcb = NULL;
+
+    /* Set priority then insert ccb into LCB queue (if we have an LCB) */
+    p_ccb->ccb_priority = L2CAP_CHNL_PRIORITY_LOW;
+
+    if (p_lcb)
+        l2cu_enqueue_ccb (p_ccb);
+
+    /* clear what peer wants to configure */
+    p_ccb->peer_cfg_bits = 0;
+
+    /* Put in default values for configuration */
+    memset (&p_ccb->our_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+    memset (&p_ccb->peer_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+
+    /* Put in default values for local/peer configurations */
+    p_ccb->our_cfg.flush_to              = p_ccb->peer_cfg.flush_to              = L2CAP_DEFAULT_FLUSH_TO;
+    p_ccb->our_cfg.mtu                   = p_ccb->peer_cfg.mtu                   = L2CAP_DEFAULT_MTU;
+    p_ccb->our_cfg.qos.service_type      = p_ccb->peer_cfg.qos.service_type      = L2CAP_DEFAULT_SERV_TYPE;
+    p_ccb->our_cfg.qos.token_rate        = p_ccb->peer_cfg.qos.token_rate        = L2CAP_DEFAULT_TOKEN_RATE;
+    p_ccb->our_cfg.qos.token_bucket_size = p_ccb->peer_cfg.qos.token_bucket_size = L2CAP_DEFAULT_BUCKET_SIZE;
+    p_ccb->our_cfg.qos.peak_bandwidth    = p_ccb->peer_cfg.qos.peak_bandwidth    = L2CAP_DEFAULT_PEAK_BANDWIDTH;
+    p_ccb->our_cfg.qos.latency           = p_ccb->peer_cfg.qos.latency           = L2CAP_DEFAULT_LATENCY;
+    p_ccb->our_cfg.qos.delay_variation   = p_ccb->peer_cfg.qos.delay_variation   = L2CAP_DEFAULT_DELAY;
+
+    p_ccb->bypass_fcs = 0;
+    memset (&p_ccb->ertm_info, 0, sizeof(tL2CAP_ERTM_INFO));
+    p_ccb->peer_cfg_already_rejected = FALSE;
+    p_ccb->fcr_cfg_tries         = L2CAP_MAX_FCR_CFG_TRIES;
+    p_ccb->fcrb.ack_timer.param  = (TIMER_PARAM_TYPE)p_ccb;
+
+    /* if timer is running, remove it from timer list */
+    if (p_ccb->fcrb.ack_timer.in_use)
+        btu_stop_quick_timer (&p_ccb->fcrb.ack_timer);
+
+    p_ccb->fcrb.mon_retrans_timer.param  = (TIMER_PARAM_TYPE)p_ccb;
+
+// btla-specific ++
+   /*  CSP408639 Fix: When L2CAP send amp move channel request or receive
+     * L2CEVT_AMP_MOVE_REQ do following sequence. Send channel move
+     * request -> Stop retrans/monitor timer -> Change channel state to CST_AMP_MOVING. */
+   if (p_ccb->fcrb.mon_retrans_timer.in_use)
+         btu_stop_quick_timer (&p_ccb->fcrb.mon_retrans_timer);
+// btla-specific --
+
+    l2c_fcr_stop_timer (p_ccb);
+
+    p_ccb->ertm_info.preferred_mode  = L2CAP_FCR_BASIC_MODE;        /* Default mode for channel is basic mode */
+    p_ccb->ertm_info.allowed_modes   = L2CAP_FCR_CHAN_OPT_BASIC;    /* Default mode for channel is basic mode */
+    p_ccb->ertm_info.fcr_rx_pool_id  = L2CAP_FCR_RX_POOL_ID;
+    p_ccb->ertm_info.fcr_tx_pool_id  = L2CAP_FCR_TX_POOL_ID;
+    p_ccb->ertm_info.user_rx_pool_id = HCI_ACL_POOL_ID;
+    p_ccb->ertm_info.user_tx_pool_id = HCI_ACL_POOL_ID;
+    p_ccb->max_rx_mtu                = L2CAP_MTU_SIZE;
+    p_ccb->tx_mps                    = GKI_get_pool_bufsize(HCI_ACL_POOL_ID) - 32;
+
+    GKI_init_q (&p_ccb->xmit_hold_q);
+
+    p_ccb->cong_sent    = FALSE;
+    p_ccb->buff_quota   = 2;                /* This gets set after config */
+
+    /* If CCB was reserved Config_Done can already have some value */
+    if (cid == 0)
+        p_ccb->config_done  = 0;
+    else
+    {
+        L2CAP_TRACE_DEBUG2 ("l2cu_allocate_ccb: cid 0x%04x config_done:0x%x", cid, p_ccb->config_done);
+    }
+
+    p_ccb->chnl_state   = CST_CLOSED;
+    p_ccb->flags        = 0;
+    p_ccb->tx_data_rate = L2CAP_CHNL_DATA_RATE_LOW;
+    p_ccb->rx_data_rate = L2CAP_CHNL_DATA_RATE_LOW;
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    p_ccb->is_flushable = FALSE;
+#endif
+
+    p_ccb->timer_entry.param = (TIMER_PARAM_TYPE)p_ccb;
+    p_ccb->timer_entry.in_use = 0;
+
+    l2c_link_adjust_chnl_allocation ();
+
+    return (p_ccb);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_start_post_bond_timer
+**
+** Description      This function starts the ACL Link inactivity timer after
+**                  dedicated bonding
+**                  This timer can be longer than the normal link inactivity
+**                  timer for some platforms.
+**
+** Returns          BOOLEAN  - TRUE if idle timer started or disconnect initiated
+**                             FALSE if there's one or more pending CCB's exist
+**
+*******************************************************************************/
+BOOLEAN l2cu_start_post_bond_timer (UINT16 handle)
+{
+    UINT16    timeout;
+    tL2C_LCB *p_lcb = l2cu_find_lcb_by_handle(handle);
+
+    if (!p_lcb)
+        return (TRUE);
+
+    p_lcb->is_bonding = FALSE;
+
+    /* Only start timer if no control blocks allocated */
+    if (p_lcb->ccb_queue.p_first_ccb != NULL)
+        return (FALSE);
+
+    /* If no channels on the connection, start idle timeout */
+    if ( (p_lcb->link_state == LST_CONNECTED) || (p_lcb->link_state == LST_CONNECTING) || (p_lcb->link_state == LST_DISCONNECTING) )
+    {
+        if (p_lcb->idle_timeout == 0)
+        {
+            if (btsnd_hcic_disconnect (p_lcb->handle, HCI_ERR_PEER_USER))
+            {
+                p_lcb->link_state = LST_DISCONNECTING;
+                timeout = L2CAP_LINK_DISCONNECT_TOUT;
+            }
+            else
+                timeout = BT_1SEC_TIMEOUT;
+        }
+        else
+        {
+            timeout = L2CAP_BONDING_TIMEOUT;
+        }
+
+        if (timeout != 0xFFFF)
+            btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, timeout);
+
+        return (TRUE);
+    }
+
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_release_ccb
+**
+** Description      This function releases a Channel Control Block. The timer
+**                  is stopped, any attached buffers freed, and the CCB is removed
+**                  from the link control block.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_release_ccb (tL2C_CCB *p_ccb)
+{
+    tL2C_LCB    *p_lcb = p_ccb->p_lcb;
+    tL2C_RCB    *p_rcb = p_ccb->p_rcb;
+
+    L2CAP_TRACE_DEBUG2 ("l2cu_release_ccb: cid 0x%04x  in_use: %u", p_ccb->local_cid, p_ccb->in_use);
+
+    /* If already released, could be race condition */
+    if (!p_ccb->in_use)
+        return;
+
+    if (p_rcb && (p_rcb->psm != p_rcb->real_psm))
+    {
+        btm_sec_clr_service_by_psm(p_rcb->psm);
+    }
+    /* Stop the timer */
+    btu_stop_timer (&p_ccb->timer_entry);
+
+    while (p_ccb->xmit_hold_q.p_first)
+        GKI_freebuf (GKI_dequeue (&p_ccb->xmit_hold_q));
+
+    l2c_fcr_cleanup (p_ccb);
+
+    /* Channel may not be assigned to any LCB if it was just pre-reserved */
+    if ( (p_lcb) &&
+         ( (p_ccb->local_cid >= L2CAP_BASE_APPL_CID)
+#if (L2CAP_UCD_INCLUDED == TRUE)
+         ||(p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID)
+#endif
+         )
+       )
+    {
+        l2cu_dequeue_ccb (p_ccb);
+
+        /* Delink the CCB from the LCB */
+        p_ccb->p_lcb = NULL;
+    }
+
+    /* Put the CCB back on the free pool */
+    if (!l2cb.p_free_ccb_first)
+    {
+        l2cb.p_free_ccb_first = p_ccb;
+        l2cb.p_free_ccb_last  = p_ccb;
+        p_ccb->p_next_ccb     = NULL;
+        p_ccb->p_prev_ccb     = NULL;
+    }
+    else
+    {
+        p_ccb->p_next_ccb  = NULL;
+        p_ccb->p_prev_ccb  = l2cb.p_free_ccb_last;
+        l2cb.p_free_ccb_last->p_next_ccb = p_ccb;
+        l2cb.p_free_ccb_last  = p_ccb;
+    }
+
+    /* Flag as not in use */
+    p_ccb->in_use = FALSE;
+
+    /* If no channels on the connection, start idle timeout */
+    if ((p_lcb) && p_lcb->in_use && (p_lcb->link_state == LST_CONNECTED))
+    {
+        if (!p_lcb->ccb_queue.p_first_ccb)
+        {
+            l2cu_no_dynamic_ccbs (p_lcb);
+        }
+        else
+        {
+            /* Link is still active, adjust channel quotas. */
+            l2c_link_adjust_chnl_allocation ();
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_find_ccb_by_remote_cid
+**
+** Description      Look through all active CCBs on a link for a match based
+**                  on the remote CID.
+**
+** Returns          pointer to matched CCB, or NULL if no match
+**
+*******************************************************************************/
+tL2C_CCB *l2cu_find_ccb_by_remote_cid (tL2C_LCB *p_lcb, UINT16 remote_cid)
+{
+    tL2C_CCB    *p_ccb;
+
+    /* If LCB is NULL, look through all active links */
+    if (!p_lcb)
+    {
+        return NULL;
+    }
+    else
+    {
+        for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+            if ((p_ccb->in_use) && (p_ccb->remote_cid == remote_cid))
+                return (p_ccb);
+    }
+
+    /* If here, no match found */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_allocate_rcb
+**
+** Description      Look through the Registration Control Blocks for a free
+**                  one.
+**
+** Returns          Pointer to the RCB or NULL if not found
+**
+*******************************************************************************/
+tL2C_RCB *l2cu_allocate_rcb (UINT16 psm)
+{
+    tL2C_RCB    *p_rcb = &l2cb.rcb_pool[0];
+    UINT16      xx;
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if (!p_rcb->in_use)
+        {
+            p_rcb->in_use = TRUE;
+            p_rcb->psm    = psm;
+#if (L2CAP_UCD_INCLUDED == TRUE)
+            p_rcb->ucd.state = L2C_UCD_STATE_UNUSED;
+#endif
+            return (p_rcb);
+        }
+    }
+
+    /* If here, no free RCB found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_release_rcb
+**
+** Description      Mark an RCB as no longet in use
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_release_rcb (tL2C_RCB *p_rcb)
+{
+    p_rcb->in_use = FALSE;
+    p_rcb->psm    = 0;
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_disconnect_chnl
+**
+** Description      Disconnect a channel. Typically, this is due to either
+**                  receiving a bad configuration,  bad packet or max_retries expiring.
+**
+*******************************************************************************/
+void l2cu_disconnect_chnl (tL2C_CCB *p_ccb)
+{
+    UINT16      local_cid = p_ccb->local_cid;
+
+    if (local_cid >= L2CAP_BASE_APPL_CID)
+    {
+        tL2CA_DISCONNECT_IND_CB   *p_disc_cb = p_ccb->p_rcb->api.pL2CA_DisconnectInd_Cb;
+
+        L2CAP_TRACE_WARNING1 ("L2CAP - disconnect_chnl CID: 0x%04x", local_cid);
+
+        l2cu_send_peer_disc_req (p_ccb);
+
+        l2cu_release_ccb (p_ccb);
+
+        (*p_disc_cb)(local_cid, FALSE);
+    }
+    else
+    {
+        /* failure on the AMP channel, probably need to disconnect ACL */
+        L2CAP_TRACE_ERROR1 ("L2CAP - disconnect_chnl CID: 0x%04x Ignored", local_cid);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_find_rcb_by_psm
+**
+** Description      Look through the Registration Control Blocks to see if
+**                  anyone registered to handle the PSM in question
+**
+** Returns          Pointer to the RCB or NULL if not found
+**
+*******************************************************************************/
+tL2C_RCB *l2cu_find_rcb_by_psm (UINT16 psm)
+{
+    tL2C_RCB    *p_rcb = &l2cb.rcb_pool[0];
+    UINT16      xx;
+
+    for (xx = 0; xx < MAX_L2CAP_CLIENTS; xx++, p_rcb++)
+    {
+        if ((p_rcb->in_use) && (p_rcb->psm == psm))
+            return (p_rcb);
+    }
+
+    /* If here, no match found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_process_peer_cfg_req
+**
+** Description      This function is called when the peer sends us a "config request"
+**                  message. It extracts the configuration of interest and saves
+**                  it in the CCB.
+**
+**                  Note:  Negotiation of the FCR channel type is handled internally,
+**                         all others are passed to the upper layer.
+**
+** Returns          UINT8 - L2CAP_PEER_CFG_OK if passed to upper layer,
+**                          L2CAP_PEER_CFG_UNACCEPTABLE if automatically responded to
+**                              because parameters are unnacceptable from a specification
+**                              point of view.
+**                          L2CAP_PEER_CFG_DISCONNECT if no compatible channel modes
+**                              between the two devices, and shall be closed.
+**
+*******************************************************************************/
+UINT8 l2cu_process_peer_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    BOOLEAN  mtu_ok      = TRUE;
+    BOOLEAN  qos_type_ok = TRUE;
+    BOOLEAN  flush_to_ok = TRUE;
+    BOOLEAN  fcr_ok      = TRUE;
+    UINT8    fcr_status;
+
+    /* Ignore FCR parameters for basic mode */
+    if (!p_cfg->fcr_present)
+        p_cfg->fcr.mode = L2CAP_FCR_BASIC_MODE;
+
+    /* Save the MTU that our peer can receive */
+    if (p_cfg->mtu_present)
+    {
+        /* Make sure MTU is at least the minimum */
+        if (p_cfg->mtu >= L2CAP_MIN_MTU)
+        {
+            /* In basic mode, limit the MTU to our buffer size */
+            if ( (p_cfg->fcr_present == FALSE) && (p_cfg->mtu > L2CAP_MTU_SIZE) )
+                p_cfg->mtu = L2CAP_MTU_SIZE;
+
+            /* Save the accepted value in case of renegotiation */
+            p_ccb->peer_cfg.mtu = p_cfg->mtu;
+            p_ccb->peer_cfg.mtu_present = TRUE;
+            p_ccb->peer_cfg_bits |= L2CAP_CH_CFG_MASK_MTU;
+        }
+        else    /* Illegal MTU value */
+        {
+            p_cfg->mtu = L2CAP_MIN_MTU;
+            mtu_ok     = FALSE;
+        }
+    }
+    /* Reload mtu from a previously accepted config request */
+    else if (p_ccb->peer_cfg.mtu_present)
+    {
+        p_cfg->mtu_present = TRUE;
+        p_cfg->mtu = p_ccb->peer_cfg.mtu;
+    }
+
+    /* Verify that the flush timeout is a valid value (0 is illegal) */
+    if (p_cfg->flush_to_present)
+    {
+        if (!p_cfg->flush_to)
+        {
+            p_cfg->flush_to = 0xFFFF;   /* Infinite retransmissions (spec default) */
+            flush_to_ok     = FALSE;
+        }
+        else    /* Save the accepted value in case of renegotiation */
+        {
+            p_ccb->peer_cfg.flush_to_present = TRUE;
+            p_ccb->peer_cfg.flush_to = p_cfg->flush_to;
+            p_ccb->peer_cfg_bits |= L2CAP_CH_CFG_MASK_FLUSH_TO;
+        }
+    }
+    /* Reload flush_to from a previously accepted config request */
+    else if (p_ccb->peer_cfg.flush_to_present)
+    {
+        p_cfg->flush_to_present = TRUE;
+        p_cfg->flush_to = p_ccb->peer_cfg.flush_to;
+    }
+
+    /* Save the QOS settings the the peer is using */
+    if (p_cfg->qos_present)
+    {
+        /* Make sure service type is not a reserved value; otherwise let upper
+           layer decide if acceptable
+        */
+        if (p_cfg->qos.service_type <= GUARANTEED)
+        {
+            p_ccb->peer_cfg.qos         = p_cfg->qos;
+            p_ccb->peer_cfg.qos_present = TRUE;
+            p_ccb->peer_cfg_bits |= L2CAP_CH_CFG_MASK_QOS;
+        }
+        else    /* Illegal service type value */
+        {
+            p_cfg->qos.service_type = BEST_EFFORT;
+            qos_type_ok             = FALSE;
+        }
+    }
+    /* Reload QOS from a previously accepted config request */
+    else if (p_ccb->peer_cfg.qos_present)
+    {
+        p_cfg->qos_present = TRUE;
+        p_cfg->qos         = p_ccb->peer_cfg.qos;
+    }
+
+    if ((fcr_status = l2c_fcr_process_peer_cfg_req (p_ccb, p_cfg)) == L2CAP_PEER_CFG_DISCONNECT)
+    {
+        /* Notify caller to disconnect the channel (incompatible modes) */
+        p_cfg->result = L2CAP_CFG_FAILED_NO_REASON;
+        p_cfg->mtu_present = p_cfg->qos_present = p_cfg->flush_to_present = 0;
+
+        return (L2CAP_PEER_CFG_DISCONNECT);
+    }
+
+    fcr_ok = (fcr_status == L2CAP_PEER_CFG_OK);
+
+    /* Return any unacceptable parameters */
+    if (mtu_ok && flush_to_ok && qos_type_ok && fcr_ok)
+    {
+        l2cu_adjust_out_mps (p_ccb);
+        return (L2CAP_PEER_CFG_OK);
+    }
+    else
+    {
+        p_cfg->result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+
+        if (mtu_ok)
+            p_cfg->mtu_present = FALSE;
+        if (flush_to_ok)
+            p_cfg->flush_to_present = FALSE;
+        if (qos_type_ok)
+            p_cfg->qos_present = FALSE;
+        if (fcr_ok)
+            p_cfg->fcr_present = FALSE;
+
+        return (L2CAP_PEER_CFG_UNACCEPTABLE);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_process_peer_cfg_rsp
+**
+** Description      This function is called when the peer sends us a "config response"
+**                  message. It extracts the configuration of interest and saves
+**                  it in the CCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_process_peer_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* If we wanted QoS and the peer sends us a positive response with QoS, use his values */
+    if ( (p_cfg->qos_present) && (p_ccb->our_cfg.qos_present) )
+        p_ccb->our_cfg.qos = p_cfg->qos;
+
+    if (p_cfg->fcr_present)
+    {
+        /* Save the retransmission and monitor timeout values */
+        if (p_cfg->fcr.mode == L2CAP_FCR_ERTM_MODE)
+        {
+            p_ccb->peer_cfg.fcr.rtrans_tout = p_cfg->fcr.rtrans_tout;
+            p_ccb->peer_cfg.fcr.mon_tout = p_cfg->fcr.mon_tout;
+        }
+
+        /* Calculate the max number of packets for which we can delay sending an ack */
+        if (p_cfg->fcr.tx_win_sz < p_ccb->our_cfg.fcr.tx_win_sz)
+            p_ccb->fcrb.max_held_acks = p_cfg->fcr.tx_win_sz / 3;
+        else
+            p_ccb->fcrb.max_held_acks = p_ccb->our_cfg.fcr.tx_win_sz / 3;
+
+        L2CAP_TRACE_DEBUG3 ("l2cu_process_peer_cfg_rsp(): peer tx_win_sz: %d, our tx_win_sz: %d, max_held_acks: %d",
+                             p_cfg->fcr.tx_win_sz, p_ccb->our_cfg.fcr.tx_win_sz, p_ccb->fcrb.max_held_acks);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_process_our_cfg_req
+**
+** Description      This function is called when we send a "config request"
+**                  message. It extracts the configuration of interest and saves
+**                  it in the CCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_process_our_cfg_req (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    tL2C_LCB    *p_lcb;
+    UINT16      hci_flush_to;
+
+    /* Save the QOS settings we are using for transmit */
+    if (p_cfg->qos_present)
+    {
+        p_ccb->our_cfg.qos_present = TRUE;
+        p_ccb->our_cfg.qos         = p_cfg->qos;
+    }
+
+    if (p_cfg->fcr_present)
+    {
+        /* Override FCR options if attempting streaming or basic */
+        if (p_cfg->fcr.mode == L2CAP_FCR_BASIC_MODE)
+            memset(&p_cfg->fcr, 0, sizeof(tL2CAP_FCR_OPTS));
+        else
+        {
+            /* On BR/EDR, timer values are zero in config request */
+            /* On class 2 AMP, timer value in config request shall be non-0 processing time */
+            /*                 timer value in config response shall be greater than received processing time */
+            p_cfg->fcr.mon_tout = p_cfg->fcr.rtrans_tout = 0;
+
+            if (p_cfg->fcr.mode == L2CAP_FCR_STREAM_MODE)
+                p_cfg->fcr.max_transmit = p_cfg->fcr.tx_win_sz = 0;
+        }
+
+        /* Set the threshold to send acks (may be updated in the cfg response) */
+        p_ccb->fcrb.max_held_acks = p_cfg->fcr.tx_win_sz / 3;
+
+        /* Include FCS option only if peer can handle it */
+        if (p_ccb->p_lcb->peer_ext_fea & L2CAP_EXTFEA_NO_CRC)
+        {
+            /* FCS check can be bypassed if peer also desires to bypass */
+            if (p_cfg->fcs_present && p_cfg->fcs == L2CAP_CFG_FCS_BYPASS)
+                p_ccb->bypass_fcs |= L2CAP_CFG_FCS_OUR;
+        }
+        else
+            p_cfg->fcs_present = FALSE;
+    }
+    else
+    {
+        p_cfg->fcr.mode = L2CAP_FCR_BASIC_MODE;
+    }
+
+    p_ccb->our_cfg.fcr.mode    = p_cfg->fcr.mode;
+    p_ccb->our_cfg.fcr_present = p_cfg->fcr_present;
+
+    /* Check the flush timeout. If it is lower than the current one used */
+    /* then we need to adjust the flush timeout sent to the controller   */
+    if (p_cfg->flush_to_present)
+    {
+        if ((p_cfg->flush_to == 0)||(p_cfg->flush_to == L2CAP_NO_AUTOMATIC_FLUSH))
+        {
+            /* don't send invalid flush timeout */
+            /* SPEC: The sender of the Request shall specify its flush timeout value */
+            /*       if it differs from the default value of 0xFFFF                  */
+            p_cfg->flush_to_present = FALSE;
+        }
+        else
+        {
+            p_ccb->our_cfg.flush_to = p_cfg->flush_to;
+            p_lcb = p_ccb->p_lcb;
+
+            if (p_cfg->flush_to < p_lcb->link_flush_tout)
+            {
+                p_lcb->link_flush_tout = p_cfg->flush_to;
+
+                /* If the timeout is within range of HCI, set the flush timeout */
+                if (p_cfg->flush_to <= ((HCI_MAX_AUTO_FLUSH_TOUT * 5) / 8))
+                {
+                    /* Convert flush timeout to 0.625 ms units, with round */
+                    hci_flush_to = ((p_cfg->flush_to * 8) + 3) / 5;
+                    btsnd_hcic_write_auto_flush_tout (p_lcb->handle, hci_flush_to);
+                }
+            }
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_process_our_cfg_rsp
+**
+** Description      This function is called when we send the peer a "config response"
+**                  message. It extracts the configuration of interest and saves
+**                  it in the CCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_process_our_cfg_rsp (tL2C_CCB *p_ccb, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* If peer wants QoS, we are allowed to change the values in a positive response */
+    if ( (p_cfg->qos_present) && (p_ccb->peer_cfg.qos_present) )
+        p_ccb->peer_cfg.qos = p_cfg->qos;
+    else
+        p_cfg->qos_present = FALSE;
+
+    l2c_fcr_adj_our_rsp_options (p_ccb, p_cfg);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_device_reset
+**
+** Description      This function is called when reset of the device is
+**                  completed.  For all active connection simulate HCI_DISC
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_device_reset (void)
+{
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->handle != HCI_INVALID_HANDLE))
+        {
+            l2c_link_hci_disc_comp (p_lcb->handle, (UINT8) -1);
+        }
+    }
+}
+
+#if (TCS_WUG_MEMBER_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
+extern UINT16 tcs_wug_get_clk_offset( BD_ADDR addr ) ;
+#endif
+
+/*******************************************************************************
+**
+** Function         l2cu_create_conn
+**
+** Description      This function initiates an acl connection via HCI
+**
+** Returns          TRUE if successful, FALSE if gki get buffer fails.
+**
+*******************************************************************************/
+BOOLEAN l2cu_create_conn (tL2C_LCB *p_lcb)
+{
+    int             xx;
+    tL2C_LCB        *p_lcb_cur = &l2cb.lcb_pool[0];
+#if BTM_SCO_INCLUDED == TRUE
+    BOOLEAN         is_sco_active;
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+    tBT_DEVICE_TYPE     dev_type;
+    tBLE_ADDR_TYPE      addr_type;
+
+    BTM_ReadDevInfo(p_lcb->remote_bd_addr, &dev_type, &addr_type);
+
+    if (dev_type == BT_DEVICE_TYPE_BLE)
+    {
+        p_lcb->ble_addr_type = addr_type;
+        p_lcb->is_ble_link   = TRUE;
+
+        return (l2cble_create_conn(p_lcb));
+    }
+#endif
+
+    /* If there is a connection where we perform as a slave, try to switch roles
+       for this connection */
+    for (xx = 0, p_lcb_cur = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb_cur++)
+    {
+        if (p_lcb_cur == p_lcb)
+            continue;
+
+        if ((p_lcb_cur->in_use) && (p_lcb_cur->link_role == HCI_ROLE_SLAVE))
+        {
+
+#if BTM_SCO_INCLUDED == TRUE
+            /* The LMP_switch_req shall be sent only if the ACL logical transport
+            is in active mode, when encryption is disabled, and all synchronous
+            logical transports on the same physical link are disabled." */
+
+            /* Check if there is any SCO Active on this BD Address */
+            is_sco_active = btm_is_sco_active_by_bdaddr(p_lcb_cur->remote_bd_addr);
+
+            L2CAP_TRACE_API1 ("l2cu_create_conn - btm_is_sco_active_by_bdaddr() is_sco_active = %s", \
+                (is_sco_active == TRUE) ? "TRUE":"FALSE");
+
+            if (is_sco_active == TRUE)
+                continue; /* No Master Slave switch not allowed when SCO Active */
+#endif
+
+            if (HCI_SWITCH_SUPPORTED(btm_cb.devcb.local_features))
+            {
+                /* mark this lcb waiting for switch to be completed and
+                   start switch on the other one */
+                p_lcb->link_state = LST_CONNECTING_WAIT_SWITCH;
+                p_lcb->link_role  = HCI_ROLE_MASTER;
+
+                if (BTM_SwitchRole (p_lcb_cur->remote_bd_addr, HCI_ROLE_MASTER, NULL) == BTM_CMD_STARTED)
+                {
+                    btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, L2CAP_LINK_ROLE_SWITCH_TOUT);
+                    return (TRUE);
+                }
+            }
+        }
+    }
+
+    p_lcb->link_state = LST_CONNECTING;
+
+    return (l2cu_create_conn_after_switch (p_lcb));
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_get_num_hi_priority
+**
+** Description      Gets the number of high priority channels.
+**
+** Returns
+**
+*******************************************************************************/
+UINT8 l2cu_get_num_hi_priority (void)
+{
+    UINT8       no_hi = 0;
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->acl_priority == L2CAP_PRIORITY_HIGH))
+        {
+            no_hi++;
+        }
+    }
+    return no_hi;
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_create_conn_after_switch
+**
+** Description      This function initiates an acl connection via HCI
+**                  If switch required to create connection it is already done.
+**
+** Returns          TRUE if successful, FALSE if gki get buffer fails.
+**
+*******************************************************************************/
+
+BOOLEAN l2cu_create_conn_after_switch (tL2C_LCB *p_lcb)
+{
+    UINT8            allow_switch = HCI_CR_CONN_ALLOW_SWITCH;
+    tBTM_INQ_INFO    *p_inq_info;
+    UINT8            page_scan_rep_mode;
+    UINT8            page_scan_mode;
+    UINT16           clock_offset;
+    UINT8            *p_features;
+    UINT16           num_acl = BTM_GetNumAclLinks();
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (p_lcb->remote_bd_addr);
+    UINT8            no_hi_prio_chs = l2cu_get_num_hi_priority();
+
+    p_features = BTM_ReadLocalFeatures();
+
+    L2CAP_TRACE_DEBUG4 ("l2cu_create_conn_after_switch :%d num_acl:%d no_hi: %d is_bonding:%d",
+        l2cb.disallow_switch, num_acl, no_hi_prio_chs, p_lcb->is_bonding);
+    /* FW team says that we can participant in 4 piconets
+     * typically 3 piconet + 1 for scanning.
+     * We can enhance the code to count the number of piconets later. */
+    if ( ((!l2cb.disallow_switch && (num_acl < 3)) || (p_lcb->is_bonding && (no_hi_prio_chs==0)))
+        && HCI_SWITCH_SUPPORTED(p_features))
+        allow_switch = HCI_CR_CONN_ALLOW_SWITCH;
+    else
+        allow_switch = HCI_CR_CONN_NOT_ALLOW_SWITCH;
+
+    p_lcb->link_state = LST_CONNECTING;
+
+
+#if (TCS_WUG_MEMBER_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
+    if ( (clock_offset = tcs_wug_get_clk_offset( p_lcb->remote_bd_addr )) != 0 )
+    {
+        page_scan_rep_mode = HCI_PAGE_SCAN_REP_MODE_R0;
+        page_scan_mode = HCI_MANDATARY_PAGE_SCAN_MODE;
+    }
+    else
+    {
+#endif
+
+        /* Check with the BT manager if details about remote device are known */
+        if ((p_inq_info = BTM_InqDbRead(p_lcb->remote_bd_addr)) != NULL)
+        {
+            page_scan_rep_mode = p_inq_info->results.page_scan_rep_mode;
+            page_scan_mode = p_inq_info->results.page_scan_mode;
+            clock_offset = (UINT16)(p_inq_info->results.clock_offset);
+        }
+        else
+        {
+            /* No info known. Use default settings */
+            page_scan_rep_mode = HCI_PAGE_SCAN_REP_MODE_R1;
+            page_scan_mode = HCI_MANDATARY_PAGE_SCAN_MODE;
+
+            clock_offset = (p_dev_rec) ? p_dev_rec->clock_offset : 0;
+        }
+#if (TCS_WUG_MEMBER_INCLUDED == TRUE && TCS_INCLUDED == TRUE)
+    }
+#endif
+
+    if (!btsnd_hcic_create_conn (p_lcb->remote_bd_addr,
+                                 HCI_PKT_TYPES_MASK_DM1 + HCI_PKT_TYPES_MASK_DH1,
+                                 page_scan_rep_mode,
+                                 page_scan_mode,
+                                 clock_offset,
+                                 allow_switch))
+
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP - no buffer for l2cu_create_conn");
+        l2cu_release_lcb (p_lcb);
+        return (FALSE);
+    }
+
+#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE)
+    btm_acl_update_busy_level (BTM_BLI_PAGE_EVT);
+#endif
+
+    btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK,
+                     L2CAP_LINK_CONNECT_TOUT);
+
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_find_lcb_by_state
+**
+** Description      Look through all active LCBs for a match based on the
+**                  LCB state.
+**
+** Returns          pointer to first matched LCB, or NULL if no match
+**
+*******************************************************************************/
+tL2C_LCB *l2cu_find_lcb_by_state (tL2C_LINK_STATE state)
+{
+    UINT16      i;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (i = 0; i < MAX_L2CAP_LINKS; i++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->link_state == state))
+        {
+            return (p_lcb);
+        }
+    }
+
+    /* If here, no match found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_lcb_disconnecting
+**
+** Description      On each active lcb, check if the lcb is in disconnecting
+**                  state, or if there are no ccb's on the lcb (implying
+                    idle timeout is running), or if last ccb on the link
+                    is in disconnecting state.
+**
+** Returns          TRUE if any of above conditions met, FALSE otherwise
+**
+*******************************************************************************/
+BOOLEAN l2cu_lcb_disconnecting (void)
+{
+    tL2C_LCB    *p_lcb;
+    tL2C_CCB    *p_ccb;
+    UINT16      i;
+    BOOLEAN     status = FALSE;
+
+    p_lcb = &l2cb.lcb_pool[0];
+
+    for (i = 0; i < MAX_L2CAP_LINKS; i++, p_lcb++)
+    {
+        if (p_lcb->in_use)
+        {
+            /* no ccbs on lcb, or lcb is in disconnecting state */
+            if ((!p_lcb->ccb_queue.p_first_ccb) || (p_lcb->link_state == LST_DISCONNECTING))
+            {
+                status = TRUE;
+                break;
+            }
+            /* only one ccb left on lcb */
+            else if (p_lcb->ccb_queue.p_first_ccb == p_lcb->ccb_queue.p_last_ccb)
+            {
+                p_ccb = p_lcb->ccb_queue.p_first_ccb;
+
+                if ((p_ccb->in_use) &&
+                    ((p_ccb->chnl_state == CST_W4_L2CAP_DISCONNECT_RSP) ||
+                     (p_ccb->chnl_state == CST_W4_L2CA_DISCONNECT_RSP)))
+                {
+                    status = TRUE;
+                    break;
+                }
+            }
+        }
+    }
+    return status;
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_set_acl_priority
+**
+** Description      Sets the transmission priority for a channel.
+**                  (For initial implementation only two values are valid.
+**                  L2CAP_PRIORITY_NORMAL and L2CAP_PRIORITY_HIGH).
+**
+** Returns          TRUE if a valid channel, else FALSE
+**
+*******************************************************************************/
+
+BOOLEAN l2cu_set_acl_priority (BD_ADDR bd_addr, UINT8 priority, BOOLEAN reset_after_rs)
+{
+    tL2C_LCB            *p_lcb;
+    UINT8               *pp;
+    UINT8                command[HCI_BRCM_ACL_PRIORITY_PARAM_SIZE];
+    UINT8                vs_param;
+
+    APPL_TRACE_EVENT1("SET ACL PRIORITY %d", priority);
+
+    /* Find the link control block for the acl channel */
+    if ((p_lcb = l2cu_find_lcb_by_bd_addr(bd_addr)) == NULL)
+    {
+        L2CAP_TRACE_WARNING0 ("L2CAP - no LCB for L2CA_SetAclPriority");
+        return (FALSE);
+    }
+
+    if (BTM_IS_BRCM_CONTROLLER())
+    {
+        /* Called from above L2CAP through API; send VSC if changed */
+        if ((!reset_after_rs && (priority != p_lcb->acl_priority)) ||
+              /* Called because of a master/slave role switch; if high resend VSC */
+            ( reset_after_rs && p_lcb->acl_priority == L2CAP_PRIORITY_HIGH))
+        {
+            pp = command;
+
+            vs_param = (priority == L2CAP_PRIORITY_HIGH) ? HCI_BRCM_ACL_PRIORITY_HIGH : HCI_BRCM_ACL_PRIORITY_LOW;
+
+            UINT16_TO_STREAM (pp, p_lcb->handle);
+            UINT8_TO_STREAM  (pp, vs_param);
+
+            BTM_VendorSpecificCommand (HCI_BRCM_SET_ACL_PRIORITY, HCI_BRCM_ACL_PRIORITY_PARAM_SIZE, command, NULL);
+
+            /* Adjust lmp buffer allocation for this channel if priority changed */
+            if (p_lcb->acl_priority != priority)
+            {
+                p_lcb->acl_priority = priority;
+                l2c_link_adjust_allocation();
+            }
+        }
+    }
+    return(TRUE);
+}
+
+#if (L2CAP_ENHANCED_FEATURES != 0)
+/*******************************************************************************
+**
+** Function         l2cu_send_feature_req
+**
+** Description      Called at connection establishment by the originator
+**                  of the connection to send an L2CAP Echo request message
+**                  to the peer to determine if he supports Widcomm proprietary
+**                  features.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_feature_req (tL2C_CCB *p_ccb)
+{
+    UINT8     saved_id;
+    UINT8     buff[100], *p = buff;
+
+    UINT8_TO_STREAM (p, 'R');
+    UINT8_TO_STREAM (p, 'Q');
+
+    UINT8_TO_STREAM (p, 'r');
+    UINT8_TO_STREAM (p, 'q');
+
+    /* save current ID to be restored after feature request */
+    saved_id = p_ccb->p_lcb->id;
+
+    /* Set appropriate ID */
+    p_ccb->p_lcb->id               = L2CAP_FEATURE_REQ_ID - 1;
+
+    l2cu_send_peer_echo_req (p_ccb->p_lcb, buff, (UINT16)(p - buff));
+
+    /* packet has been built so we can restore the control block id */
+    p_ccb->p_lcb->id = saved_id;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         l2cu_check_feature_req
+**
+** Description      Called when an echo request is received to check if the
+**                  other side is doing a proprietary feature request. If so,
+**                  extract the values and reply with a features response.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN l2cu_check_feature_req (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len)
+{
+    UINT8   buff[100];
+    UINT8   *p_out           = buff;
+    UINT8   *p_end           = p_data + data_len - 2;
+    UINT8   pe_type, pe_len;
+
+    if ((data_len <= 4)
+     || (p_data[0] != 'R')
+     || (p_data[1] != 'Q')
+     || (p_data[data_len - 2] != 'r')
+     || (p_data[data_len - 1] != 'q')
+     || (id != L2CAP_FEATURE_REQ_ID))
+        return (FALSE);
+
+    /* Skip leading frame characters */
+    p_data += 2;
+
+    UINT8_TO_STREAM (p_out, 'R');
+    UINT8_TO_STREAM (p_out, 'S');
+
+    while (p_data < p_end)
+    {
+        pe_type  = *p_data++;
+        pe_len   = *p_data++;
+
+        switch (pe_type)
+        {
+        default:
+            p_data += pe_len;
+            break;
+        }
+    }
+
+    /* Sanity check - we should not overrun the input */
+    if (p_data != p_end)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP - badly formatted feature req");
+        return (FALSE);
+    }
+
+    UINT8_TO_STREAM (p_out, 'r');
+    UINT8_TO_STREAM (p_out, 's');
+
+    l2cu_send_peer_echo_rsp (p_lcb, L2CAP_FEATURE_RSP_ID, buff, (UINT16)(p_out - buff));
+
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_check_feature_rsp
+**
+** Description      Called when an echo response is received to check if the
+**                  other side is suports proprietary feature(s). If so,
+**                  extract the values.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_check_feature_rsp (tL2C_LCB *p_lcb, UINT8 id, UINT8 *p_data, UINT16 data_len)
+{
+    UINT8       *p_end = p_data + data_len - 2;
+
+     if ((data_len <= 4)
+       || (p_data[0] != 'R')
+       || (p_data[1] != 'S')
+       || (p_data[data_len - 2] != 'r')
+       || (p_data[data_len - 1] != 's')
+       || (id != L2CAP_FEATURE_RSP_ID))
+    {
+        return;
+    }
+
+    /* Skip leading frame characters */
+    p_data += 2;
+
+    while (p_data < p_end)
+    {
+        UINT8   pe_id  = *p_data++;
+        UINT8   pe_len = *p_data++;
+
+        switch (pe_id)
+        {
+        default:
+            p_data += pe_len;
+            break;
+        }
+    }
+
+    /* Sanity check - we should not overrun the input */
+    if (p_data != p_end)
+    {
+        L2CAP_TRACE_ERROR0 ("L2CAP - badly formatted feature rsp");
+    }
+}
+#endif /* L2CAP_ENHANCED_FEATURES != 0 */
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+/******************************************************************************
+**
+** Function         l2cu_set_non_flushable_pbf
+**
+** Description      set L2CAP_PKT_START_NON_FLUSHABLE if controller supoorts
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_set_non_flushable_pbf (BOOLEAN is_supported)
+{
+    if (is_supported)
+        l2cb.non_flushable_pbf = (L2CAP_PKT_START_NON_FLUSHABLE << L2CAP_PKT_TYPE_SHIFT);
+    else
+        l2cb.non_flushable_pbf = (L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT);
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         l2cu_resubmit_pending_sec_req
+**
+** Description      This function is called when required security procedures
+**                  are completed and any pending requests can be re-submitted.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_resubmit_pending_sec_req (BD_ADDR p_bda)
+{
+    tL2C_LCB        *p_lcb;
+    tL2C_CCB        *p_ccb;
+    tL2C_CCB        *p_next_ccb;
+    int             xx;
+
+    L2CAP_TRACE_DEBUG1 ("l2cu_resubmit_pending_sec_req  p_bda: 0x%08x", p_bda);
+
+    /* If we are called with a BDA, only resubmit for that BDA */
+    if (p_bda)
+    {
+        p_lcb = l2cu_find_lcb_by_bd_addr (p_bda);
+
+        /* If we don't have one, this is an error */
+        if (p_lcb)
+        {
+            /* For all channels, send the event through their FSMs */
+            for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_next_ccb)
+            {
+                p_next_ccb = p_ccb->p_next_ccb;
+                l2c_csm_execute (p_ccb, L2CEVT_SEC_RE_SEND_CMD, NULL);
+            }
+        }
+        else
+        {
+            L2CAP_TRACE_WARNING0 ("l2cu_resubmit_pending_sec_req - unknown BD_ADDR");
+        }
+    }
+    else
+    {
+        /* No BDA pasesed in, so check all links */
+        for (xx = 0, p_lcb = &l2cb.lcb_pool[0]; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+        {
+            if (p_lcb->in_use)
+            {
+                /* For all channels, send the event through their FSMs */
+                for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_next_ccb)
+                {
+                    p_next_ccb = p_ccb->p_next_ccb;
+                    l2c_csm_execute (p_ccb, L2CEVT_SEC_RE_SEND_CMD, NULL);
+                }
+            }
+        }
+    }
+}
+
+#if L2CAP_CONFORMANCE_TESTING == TRUE
+/*******************************************************************************
+**
+** Function         l2cu_set_info_rsp_mask
+**
+** Description      This function allows the script wrapper to change the
+**                  info resp mask for conformance testing.
+**
+** Returns          pointer to CCB, or NULL if none
+**
+*******************************************************************************/
+void l2cu_set_info_rsp_mask (UINT32 mask)
+{
+    l2cb.test_info_resp = mask;
+}
+#endif  /* L2CAP_CONFORMANCE_TESTING */
+
+/*******************************************************************************
+**
+** Function         l2cu_adjust_out_mps
+**
+** Description      Sets our MPS based on current controller capabilities
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_adjust_out_mps (tL2C_CCB *p_ccb)
+{
+    UINT16 packet_size;
+
+    /* on the tx side MTU is selected based on packet size of the controller */
+    packet_size = btm_get_max_packet_size (p_ccb->p_lcb->remote_bd_addr);
+
+    if (packet_size <= (L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD + L2CAP_SDU_LEN_OVERHEAD + L2CAP_FCS_LEN))
+    {
+        /* something is very wrong */
+        L2CAP_TRACE_ERROR2 ("l2cu_adjust_out_mps bad packet size: %u  will use MPS: %u", packet_size, p_ccb->peer_cfg.fcr.mps);
+        p_ccb->tx_mps = p_ccb->peer_cfg.fcr.mps;
+    }
+    else
+    {
+        packet_size -= (L2CAP_PKT_OVERHEAD + L2CAP_FCR_OVERHEAD + L2CAP_SDU_LEN_OVERHEAD + L2CAP_FCS_LEN);
+
+        /* We try to negotiate MTU that each packet can be split into whole
+        number of max packets.  For example if link is 1.2 max packet size is 339 bytes.
+        At first calculate how many whole packets it is.  MAX L2CAP is 1691 + 4 overhead.
+        1695, that will be 5 Dh5 packets.  Now maximum L2CAP packet is
+        5 * 339 = 1695. Minus 4 bytes L2CAP header 1691.
+
+        For EDR 2.0 packet size is 1027.  So we better send RFCOMM packet as 1 3DH5 packet
+        1 * 1027 = 1027.  Minus 4 bytes L2CAP header 1023.  */
+        if (p_ccb->peer_cfg.fcr.mps >= packet_size)
+            p_ccb->tx_mps = p_ccb->peer_cfg.fcr.mps / packet_size * packet_size;
+        else
+            p_ccb->tx_mps = p_ccb->peer_cfg.fcr.mps;
+
+        L2CAP_TRACE_DEBUG3 ("l2cu_adjust_out_mps use %d   Based on peer_cfg.fcr.mps: %u  packet_size: %u",
+                            p_ccb->tx_mps, p_ccb->peer_cfg.fcr.mps, packet_size);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         l2cu_initialize_fixed_ccb
+**
+** Description      Initialize a fixed channel's CCB
+**
+** Returns          TRUE or FALSE
+**
+*******************************************************************************/
+BOOLEAN l2cu_initialize_fixed_ccb (tL2C_LCB *p_lcb, UINT16 fixed_cid, tL2CAP_FCR_OPTS *p_fcr)
+{
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    tL2C_CCB    *p_ccb;
+
+    /* If we already have a CCB, then simply return */
+    if (p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL] != NULL)
+        return (TRUE);
+
+    if ((p_ccb = l2cu_allocate_ccb (NULL, 0)) == NULL)
+        return (FALSE);
+
+    /* Set CID for the connection */
+    p_ccb->local_cid  = fixed_cid;
+    p_ccb->remote_cid = fixed_cid;
+
+    GKI_init_q (&p_ccb->xmit_hold_q);
+
+    p_ccb->is_flushable = FALSE;
+
+    p_ccb->timer_entry.param  = (TIMER_PARAM_TYPE)p_ccb;
+
+
+    if (p_fcr)
+    {
+        /* Set the FCR parameters. For now, we will use default pools */
+        p_ccb->our_cfg.fcr = p_ccb->peer_cfg.fcr = *p_fcr;
+
+        p_ccb->ertm_info.fcr_rx_pool_id  = HCI_ACL_POOL_ID;
+        p_ccb->ertm_info.fcr_tx_pool_id  = HCI_ACL_POOL_ID;
+        p_ccb->ertm_info.user_rx_pool_id = HCI_ACL_POOL_ID;
+        p_ccb->ertm_info.user_tx_pool_id = HCI_ACL_POOL_ID;
+
+        p_ccb->fcrb.max_held_acks = p_fcr->tx_win_sz / 3;
+    }
+
+    /* Link ccb to lcb and lcb to ccb */
+    p_lcb->p_fixed_ccbs[fixed_cid - L2CAP_FIRST_FIXED_CHNL] = p_ccb;
+    p_ccb->p_lcb = p_lcb;
+
+    /* There is no configuration, so if the link is up, the channel is up */
+    if (p_lcb->link_state == LST_CONNECTED)
+        p_ccb->chnl_state = CST_OPEN;
+
+    /* Set the default idle timeout value to use */
+    p_ccb->fixed_chnl_idle_tout = l2cb.fixed_reg[fixed_cid - L2CAP_FIRST_FIXED_CHNL].default_idle_tout;
+#endif
+    return (TRUE);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_no_dynamic_ccbs
+**
+** Description      Handles the case when there are no more dynamic CCBs. If there
+**                  are any fixed CCBs, start the longest of the fixed CCB timeouts,
+**                  otherwise start the default link idle timeout or disconnect.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_no_dynamic_ccbs (tL2C_LCB *p_lcb)
+{
+    tBTM_STATUS     rc;
+    UINT16          timeout = p_lcb->idle_timeout;
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    int         xx;
+
+    for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+    {
+        if ( (p_lcb->p_fixed_ccbs[xx] != NULL) && (p_lcb->p_fixed_ccbs[xx]->fixed_chnl_idle_tout > timeout) )
+            timeout = p_lcb->p_fixed_ccbs[xx]->fixed_chnl_idle_tout;
+    }
+#endif
+
+    /* If the link is pairing, do not mess with the timeouts */
+    if (p_lcb->is_bonding)
+        return;
+
+    if (timeout == 0)
+    {
+        L2CAP_TRACE_DEBUG0 ("l2cu_no_dynamic_ccbs() IDLE timer 0, disconnecting link");
+
+        rc = btm_sec_disconnect (p_lcb->handle, HCI_ERR_PEER_USER);
+        if (rc == BTM_CMD_STARTED)
+        {
+            p_lcb->link_state = LST_DISCONNECTING;
+            timeout = L2CAP_LINK_DISCONNECT_TOUT;
+        }
+        else if (rc == BTM_SUCCESS)
+        {
+            /* BTM SEC will make sure that link is release (probably after pairing is done) */
+            p_lcb->link_state = LST_DISCONNECTING;
+            timeout = 0xFFFF;
+        }
+        else if ( (p_lcb->is_bonding)
+            &&   (btsnd_hcic_disconnect (p_lcb->handle, HCI_ERR_PEER_USER)) )
+        {
+            p_lcb->link_state = LST_DISCONNECTING;
+            timeout = L2CAP_LINK_DISCONNECT_TOUT;
+        }
+        else
+        {
+            /* probably no buffer to send disconnect */
+            timeout = BT_1SEC_TIMEOUT;
+        }
+    }
+
+    if (timeout != 0xFFFF)
+    {
+        L2CAP_TRACE_DEBUG1 ("l2cu_no_dynamic_ccbs() starting IDLE timeout: %d", timeout);
+        btu_start_timer (&p_lcb->timer_entry, BTU_TTYPE_L2CAP_LINK, timeout);
+    }
+    else
+    {
+        btu_stop_timer(&p_lcb->timer_entry);
+    }
+}
+
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+/*******************************************************************************
+**
+** Function         l2cu_process_fixed_chnl_resp
+**
+** Description      handle a fixed channel response (or lack thereof)
+**                  if the link failed, or a fixed channel response was
+**                  not received, the bitfield is all zeros.
+**
+*******************************************************************************/
+void l2cu_process_fixed_chnl_resp (tL2C_LCB *p_lcb)
+{
+    int     xx;
+#if BLE_INCLUDED == TRUE
+    UINT16  reason = (p_lcb->is_ble_link ) ? 1 : 0;
+#else
+    UINT16 reason =0;
+#endif
+
+    /* Tell all registered fixed channels about the connection */
+    for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+    {
+        if (l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb != NULL)
+        {
+            if (p_lcb->peer_chnl_mask[0] & (1 << (xx + L2CAP_FIRST_FIXED_CHNL)))
+            {
+                if (p_lcb->p_fixed_ccbs[xx])
+                    p_lcb->p_fixed_ccbs[xx]->chnl_state = CST_OPEN;
+
+                (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, TRUE, reason);
+            }
+            else if (p_lcb->p_fixed_ccbs[xx])
+            {
+                (*l2cb.fixed_reg[xx].pL2CA_FixedConn_Cb)(p_lcb->remote_bd_addr, FALSE, p_lcb->disc_reason);
+                l2cu_release_ccb (p_lcb->p_fixed_ccbs[xx]);
+                p_lcb->p_fixed_ccbs[xx] = NULL;
+            }
+        }
+    }
+}
+#endif
+
+#if (BLE_INCLUDED == TRUE)
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_ble_par_req
+**
+** Description      Build and send a BLE parameter update request message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_ble_par_req (tL2C_LCB *p_lcb, UINT16 min_int, UINT16 max_int, UINT16 latency, UINT16 timeout)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    /* Create an identifier for this packet */
+    p_lcb->id++;
+    l2cu_adj_id (p_lcb, L2CAP_ADJ_ID);
+
+    if ((p_buf = l2cu_build_header (p_lcb, L2CAP_CMD_BLE_UPD_REQ_LEN, L2CAP_CMD_BLE_UPDATE_REQ, p_lcb->id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("l2cu_send_peer_ble_par_req - no buffer");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, min_int);
+    UINT16_TO_STREAM (p, max_int);
+    UINT16_TO_STREAM (p, latency);
+    UINT16_TO_STREAM (p, timeout);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_send_peer_ble_par_rsp
+**
+** Description      Build and send a BLE parameter update response message
+**                  to the peer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void l2cu_send_peer_ble_par_rsp (tL2C_LCB *p_lcb, UINT16 reason, UINT8 rem_id)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p;
+
+    if ((p_buf = l2cu_build_header (p_lcb, L2CAP_CMD_BLE_UPD_RSP_LEN, L2CAP_CMD_BLE_UPDATE_RSP, rem_id)) == NULL )
+    {
+        L2CAP_TRACE_WARNING0 ("l2cu_send_peer_ble_par_rsp - no buffer");
+        return;
+    }
+
+    p = (UINT8 *)(p_buf + 1) + L2CAP_SEND_CMD_OFFSET + HCI_DATA_PREAMBLE_SIZE +
+                               L2CAP_PKT_OVERHEAD + L2CAP_CMD_OVERHEAD;
+
+    UINT16_TO_STREAM (p, reason);
+
+    l2c_link_check_send_pkts (p_lcb, NULL, p_buf);
+}
+
+#endif /* BLE_INCLUDED == TRUE */
+
+
+/*******************************************************************************
+** Functions used by both Full and Light Stack
+********************************************************************************/
+
+/*******************************************************************************
+**
+** Function         l2cu_find_lcb_by_handle
+**
+** Description      Look through all active LCBs for a match based on the
+**                  HCI handle.
+**
+** Returns          pointer to matched LCB, or NULL if no match
+**
+*******************************************************************************/
+tL2C_LCB  *l2cu_find_lcb_by_handle (UINT16 handle)
+{
+    int         xx;
+    tL2C_LCB    *p_lcb = &l2cb.lcb_pool[0];
+
+    for (xx = 0; xx < MAX_L2CAP_LINKS; xx++, p_lcb++)
+    {
+        if ((p_lcb->in_use) && (p_lcb->handle == handle))
+        {
+            return (p_lcb);
+        }
+    }
+
+    /* If here, no match found */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         l2cu_find_ccb_by_cid
+**
+** Description      Look through all active CCBs on a link for a match based
+**                  on the local CID. If passed the link pointer is NULL, all
+**                  active links are searched.
+**
+** Returns          pointer to matched CCB, or NULL if no match
+**
+*******************************************************************************/
+tL2C_CCB *l2cu_find_ccb_by_cid (tL2C_LCB *p_lcb, UINT16 local_cid)
+{
+    tL2C_CCB    *p_ccb = NULL;
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    UINT8 xx;
+#endif
+
+    if (local_cid >= L2CAP_BASE_APPL_CID)
+    {
+        /* find the associated CCB by "index" */
+        local_cid -= L2CAP_BASE_APPL_CID;
+
+        if (local_cid >= MAX_L2CAP_CHANNELS)
+            return NULL;
+
+        p_ccb = l2cb.ccb_pool + local_cid;
+
+        /* make sure the CCB is in use */
+        if (!p_ccb->in_use)
+        {
+            p_ccb = NULL;
+        }
+        /* make sure it's for the same LCB */
+        else if (p_lcb && p_lcb != p_ccb->p_lcb)
+        {
+            p_ccb = NULL;
+        }
+    }
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    else
+    {
+        /* searching fixed channel */
+        p_ccb = l2cb.ccb_pool;
+        for ( xx = 0; xx < MAX_L2CAP_CHANNELS; xx++ )
+        {
+            if ((p_ccb->local_cid == local_cid)
+              &&(p_ccb->in_use)
+              &&(p_lcb == p_ccb->p_lcb))
+                break;
+            else
+                p_ccb++;
+        }
+        if ( xx >= MAX_L2CAP_CHANNELS )
+            return NULL;
+    }
+#endif
+
+    return (p_ccb);
+}
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+
+/******************************************************************************
+**
+** Function         l2cu_get_next_channel_in_rr
+**
+** Description      get the next channel to send on a link. It also adjusts the
+**                  CCB queue to do a basic priority and round-robin scheduling.
+**
+** Returns          pointer to CCB or NULL
+**
+*******************************************************************************/
+static tL2C_CCB *l2cu_get_next_channel_in_rr(tL2C_LCB *p_lcb)
+{
+    tL2C_CCB    *p_serve_ccb = NULL;
+    tL2C_CCB    *p_ccb;
+
+    int i, j;
+
+    /* scan all of priority until finding a channel to serve */
+    for ( i = 0; (i < L2CAP_NUM_CHNL_PRIORITY)&&(!p_serve_ccb); i++ )
+    {
+        /* scan all channel within serving priority group until finding a channel to serve */
+        for ( j = 0; (j < p_lcb->rr_serv[p_lcb->rr_pri].num_ccb)&&(!p_serve_ccb); j++)
+        {
+            /* scaning from next serving channel */
+            p_ccb = p_lcb->rr_serv[p_lcb->rr_pri].p_serve_ccb;
+
+            if (!p_ccb)
+            {
+                L2CAP_TRACE_ERROR1("p_serve_ccb is NULL, rr_pri=%d", p_lcb->rr_pri);
+                return NULL;
+            }
+
+            L2CAP_TRACE_DEBUG3("RR scan pri=%d, lcid=0x%04x, q_cout=%d",
+                                p_ccb->ccb_priority, p_ccb->local_cid, p_ccb->xmit_hold_q.count );
+
+            /* store the next serving channel */
+            /* this channel is the last channel of its priority group */
+            if (( p_ccb->p_next_ccb == NULL )
+              ||( p_ccb->p_next_ccb->ccb_priority != p_ccb->ccb_priority ))
+            {
+                /* next serving channel is set to the first channel in the group */
+                p_lcb->rr_serv[p_lcb->rr_pri].p_serve_ccb = p_lcb->rr_serv[p_lcb->rr_pri].p_first_ccb;
+            }
+            else
+            {
+                /* next serving channel is set to the next channel in the group */
+                p_lcb->rr_serv[p_lcb->rr_pri].p_serve_ccb = p_ccb->p_next_ccb;
+            }
+
+            if (p_ccb->chnl_state != CST_OPEN)
+                continue;
+
+            /* eL2CAP option in use */
+            if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+            {
+                if (p_ccb->fcrb.wait_ack || p_ccb->fcrb.remote_busy)
+                    continue;
+
+                if ( p_ccb->fcrb.retrans_q.count == 0 )
+                {
+                    if ( p_ccb->xmit_hold_q.count == 0 )
+                        continue;
+
+                    /* If using the common pool, should be at least 10% free. */
+                    if ( (p_ccb->ertm_info.fcr_tx_pool_id == HCI_ACL_POOL_ID) && (GKI_poolutilization (HCI_ACL_POOL_ID) > 90) )
+                        continue;
+
+                    /* If in eRTM mode, check for window closure */
+                    if ( (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) && (l2c_fcr_is_flow_controlled (p_ccb)) )
+                        continue;
+                }
+            }
+            else
+            {
+                if (p_ccb->xmit_hold_q.count == 0)
+                    continue;
+            }
+
+            /* found a channel to serve */
+            p_serve_ccb = p_ccb;
+            /* decrease quota of its priority group */
+            p_lcb->rr_serv[p_lcb->rr_pri].quota--;
+        }
+
+        /* if there is no more quota of the priority group or no channel to have data to send */
+        if ((p_lcb->rr_serv[p_lcb->rr_pri].quota == 0)||(!p_serve_ccb))
+        {
+            /* serve next priority group */
+            p_lcb->rr_pri = (p_lcb->rr_pri + 1) % L2CAP_NUM_CHNL_PRIORITY;
+            /* initialize its quota */
+            p_lcb->rr_serv[p_lcb->rr_pri].quota = L2CAP_GET_PRIORITY_QUOTA(p_lcb->rr_pri);
+        }
+    }
+
+    if (p_serve_ccb)
+    {
+        L2CAP_TRACE_DEBUG3("RR service pri=%d, quota=%d, lcid=0x%04x",
+                            p_serve_ccb->ccb_priority,
+                            p_lcb->rr_serv[p_serve_ccb->ccb_priority].quota,
+                            p_serve_ccb->local_cid );
+    }
+
+    return p_serve_ccb;
+}
+
+#else /* (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) */
+
+/******************************************************************************
+**
+** Function         l2cu_get_next_channel
+**
+** Description      get the next channel to send on a link bassed on priority
+**                  scheduling.
+**
+** Returns          pointer to CCB or NULL
+**
+*******************************************************************************/
+static tL2C_CCB *l2cu_get_next_channel(tL2C_LCB *p_lcb)
+{
+    tL2C_CCB    *p_ccb;
+
+    /* Get the first CCB with data to send.
+    */
+    for (p_ccb = p_lcb->ccb_queue.p_first_ccb; p_ccb; p_ccb = p_ccb->p_next_ccb)
+    {
+        if (p_ccb->chnl_state != CST_OPEN)
+            continue;
+
+        if (p_ccb->fcrb.wait_ack || p_ccb->fcrb.remote_busy)
+            continue;
+
+        if (p_ccb->fcrb.retrans_q.count != 0)
+            return p_ccb;
+
+        if (p_ccb->xmit_hold_q.count == 0)
+            continue;
+
+        /* If using the common pool, should be at least 10% free. */
+        if ( (p_ccb->ertm_info.fcr_tx_pool_id == HCI_ACL_POOL_ID) && (GKI_poolutilization (HCI_ACL_POOL_ID) > 90) )
+            continue;
+
+        /* If in eRTM mode, check for window closure */
+        if ( (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) && (l2c_fcr_is_flow_controlled (p_ccb)) )
+            continue;
+
+        /* If here, we found someone */
+        return p_ccb;
+    }
+
+    return NULL;
+}
+#endif /* (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE) */
+
+/******************************************************************************
+**
+** Function         l2cu_get_next_buffer_to_send
+**
+** Description      get the next buffer to send on a link. It also adjusts the
+**                  CCB queue to do a basic priority and round-robin scheduling.
+**
+** Returns          pointer to buffer or NULL
+**
+*******************************************************************************/
+BT_HDR *l2cu_get_next_buffer_to_send (tL2C_LCB *p_lcb)
+{
+    tL2C_CCB    *p_ccb;
+    BT_HDR      *p_buf;
+
+    /* Highest priority are fixed channels */
+#if (L2CAP_NUM_FIXED_CHNLS > 0)
+    int         xx;
+
+    for (xx = 0; xx < L2CAP_NUM_FIXED_CHNLS; xx++)
+    {
+        if ((p_ccb = p_lcb->p_fixed_ccbs[xx]) == NULL)
+            continue;
+
+        /* eL2CAP option in use */
+        if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            if (p_ccb->fcrb.wait_ack || p_ccb->fcrb.remote_busy)
+                continue;
+
+            /* No more checks needed if sending from the reatransmit queue */
+            if (p_ccb->fcrb.retrans_q.count == 0)
+            {
+                if (p_ccb->xmit_hold_q.count == 0)
+                    continue;
+
+                /* If using the common pool, should be at least 10% free. */
+                if ( (p_ccb->ertm_info.fcr_tx_pool_id == HCI_ACL_POOL_ID) && (GKI_poolutilization (HCI_ACL_POOL_ID) > 90) )
+                    continue;
+
+                /* If in eRTM mode, check for window closure */
+                if ( (p_ccb->peer_cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) && (l2c_fcr_is_flow_controlled (p_ccb)) )
+                    continue;
+            }
+
+            if ((p_buf = l2c_fcr_get_next_xmit_sdu_seg(p_ccb, 0)) != NULL)
+            {
+                l2cu_set_acl_hci_header (p_buf, p_ccb);
+                return (p_buf);
+            }
+        }
+        else
+        {
+            if (p_ccb->xmit_hold_q.count != 0)
+            {
+                p_buf = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_hold_q);
+                l2cu_set_acl_hci_header (p_buf, p_ccb);
+                return (p_buf);
+            }
+        }
+    }
+#endif
+
+#if (L2CAP_ROUND_ROBIN_CHANNEL_SERVICE == TRUE)
+    /* get next serving channel in round-robin */
+    p_ccb  = l2cu_get_next_channel_in_rr( p_lcb );
+#else
+    p_ccb  = l2cu_get_next_channel( p_lcb );
+#endif
+
+    /* Return if no buffer */
+    if (p_ccb == NULL)
+        return (NULL);
+
+    if (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+    {
+        if ((p_buf = l2c_fcr_get_next_xmit_sdu_seg(p_ccb, 0)) == NULL)
+            return (NULL);
+    }
+    else
+    {
+        p_buf = (BT_HDR *)GKI_dequeue (&p_ccb->xmit_hold_q);
+    }
+
+    if ( p_ccb->p_rcb && p_ccb->p_rcb->api.pL2CA_TxComplete_Cb && (p_ccb->peer_cfg.fcr.mode != L2CAP_FCR_ERTM_MODE) )
+        (*p_ccb->p_rcb->api.pL2CA_TxComplete_Cb)(p_ccb->local_cid, 1);
+
+
+    l2cu_check_channel_congestion (p_ccb);
+
+    l2cu_set_acl_hci_header (p_buf, p_ccb);
+
+    return (p_buf);
+}
+
+/******************************************************************************
+**
+** Function         l2cu_set_acl_hci_header
+**
+** Description      Set HCI handle for ACL packet
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2cu_set_acl_hci_header (BT_HDR *p_buf, tL2C_CCB *p_ccb)
+{
+    UINT8       *p;
+
+    /* Set the pointer to the beginning of the data minus 4 bytes for the packet header */
+    p = (UINT8 *)(p_buf + 1) + p_buf->offset - HCI_DATA_PREAMBLE_SIZE;
+
+#if (L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE)
+    if ( (((p_buf->layer_specific & L2CAP_FLUSHABLE_MASK) == L2CAP_FLUSHABLE_CH_BASED) && (p_ccb->is_flushable))
+            || ((p_buf->layer_specific & L2CAP_FLUSHABLE_MASK) == L2CAP_FLUSHABLE_PKT) )
+    {
+        UINT16_TO_STREAM (p, p_ccb->p_lcb->handle | (L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT));
+    }
+    else
+    {
+        UINT16_TO_STREAM (p, p_ccb->p_lcb->handle | l2cb.non_flushable_pbf);
+    }
+#else
+    UINT16_TO_STREAM (p, p_ccb->p_lcb->handle | (L2CAP_PKT_START << L2CAP_PKT_TYPE_SHIFT));
+#endif
+#if (BLE_INCLUDED == TRUE)
+    if (p_ccb->p_lcb->is_ble_link)
+    {
+        /* The HCI transport will segment the buffers. */
+        if (p_buf->len > btu_cb.hcit_ble_acl_data_size)
+        {
+            UINT16_TO_STREAM (p, btu_cb.hcit_ble_acl_data_size);
+        }
+        else
+        {
+            UINT16_TO_STREAM (p, p_buf->len);
+        }
+    } /* (BLE_INCLUDED == TRUE) */
+    else
+#endif
+    {
+
+        /* The HCI transport will segment the buffers. */
+        if (p_buf->len > btu_cb.hcit_acl_data_size)
+        {
+            UINT16_TO_STREAM (p, btu_cb.hcit_acl_data_size);
+        }
+        else
+        {
+            UINT16_TO_STREAM (p, p_buf->len);
+        }
+    }
+    p_buf->offset -= HCI_DATA_PREAMBLE_SIZE;
+    p_buf->len    += HCI_DATA_PREAMBLE_SIZE;
+}
+
+/******************************************************************************
+**
+** Function         l2cu_check_channel_congestion
+**
+** Description      check if any change in congestion status
+**
+** Returns          None
+**
+*******************************************************************************/
+void l2cu_check_channel_congestion (tL2C_CCB *p_ccb)
+{
+    UINT16 q_count = p_ccb->xmit_hold_q.count;
+
+#if (L2CAP_UCD_INCLUDED == TRUE)
+    if ( p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID )
+    {
+        q_count += p_ccb->p_lcb->ucd_out_sec_pending_q.count;
+    }
+#endif
+
+    /* If the CCB queue limit is subject to a quota, check for congestion */
+
+    /* if this channel has outgoing traffic */
+    if ((p_ccb->p_rcb)&&(p_ccb->buff_quota != 0))
+    {
+        /* If this channel was congested */
+        if ( p_ccb->cong_sent )
+        {
+            /* If the channel is not congested now, tell the app */
+            if (q_count <= (p_ccb->buff_quota / 2))
+            {
+                p_ccb->cong_sent = FALSE;
+                if (p_ccb->p_rcb->api.pL2CA_CongestionStatus_Cb)
+                {
+                    L2CAP_TRACE_DEBUG3 ("L2CAP - Calling CongestionStatus_Cb (FALSE), CID: 0x%04x  xmit_hold_q.count: %u  buff_quota: %u",
+                                      p_ccb->local_cid, q_count, p_ccb->buff_quota);
+
+                    /* Prevent recursive calling */
+                    l2cb.is_cong_cback_context = TRUE;
+                    (*p_ccb->p_rcb->api.pL2CA_CongestionStatus_Cb)(p_ccb->local_cid, FALSE);
+                    l2cb.is_cong_cback_context = FALSE;
+                }
+#if (L2CAP_UCD_INCLUDED == TRUE)
+                else if ( p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID )
+                {
+                    if ( p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb )
+                    {
+                        L2CAP_TRACE_DEBUG3 ("L2CAP - Calling UCD CongestionStatus_Cb (FALSE), SecPendingQ:%u,XmitQ:%u,Quota:%u",
+                                             p_ccb->p_lcb->ucd_out_sec_pending_q.count,
+                                             p_ccb->xmit_hold_q.count, p_ccb->buff_quota);
+                        p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb( p_ccb->p_lcb->remote_bd_addr, FALSE );
+                    }
+                }
+#endif
+            }
+        }
+        else
+        {
+            /* If this channel was not congested but it is congested now, tell the app */
+            if (q_count > p_ccb->buff_quota)
+            {
+                p_ccb->cong_sent = TRUE;
+                if (p_ccb->p_rcb->api.pL2CA_CongestionStatus_Cb)
+                {
+                    L2CAP_TRACE_DEBUG3 ("L2CAP - Calling CongestionStatus_Cb (TRUE),CID:0x%04x,XmitQ:%u,Quota:%u",
+                        p_ccb->local_cid, q_count, p_ccb->buff_quota);
+
+                    (*p_ccb->p_rcb->api.pL2CA_CongestionStatus_Cb)(p_ccb->local_cid, TRUE);
+                }
+#if (L2CAP_UCD_INCLUDED == TRUE)
+                else if ( p_ccb->local_cid == L2CAP_CONNECTIONLESS_CID )
+                {
+                    if ( p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb )
+                    {
+                        L2CAP_TRACE_DEBUG3 ("L2CAP - Calling UCD CongestionStatus_Cb (TRUE), SecPendingQ:%u,XmitQ:%u,Quota:%u",
+                                             p_ccb->p_lcb->ucd_out_sec_pending_q.count,
+                                             p_ccb->xmit_hold_q.count, p_ccb->buff_quota);
+                        p_ccb->p_rcb->ucd.cb_info.pL2CA_UCD_Congestion_Status_Cb( p_ccb->p_lcb->remote_bd_addr, TRUE );
+                    }
+                }
+#endif
+            }
+        }
+    }
+}
+
diff --git a/stack/mcap/mca_api.c b/stack/mcap/mca_api.c
new file mode 100644
index 0000000..1792f8c
--- /dev/null
+++ b/stack/mcap/mca_api.c
@@ -0,0 +1,925 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the API implementation file for the Multi-Channel Adaptation
+ *  Protocol (MCAP).
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+
+#include "wcassert.h"
+#include "btu.h"
+
+
+/*******************************************************************************
+**
+** Function         mca_process_timeout
+**
+** Description      This function is called by BTU when an MCA timer
+**                  expires.
+**
+**                  This function is for use internal to the stack only.
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_process_timeout(TIMER_LIST_ENT *p_tle)
+{
+    if(p_tle->event == BTU_TTYPE_MCA_CCB_RSP)
+    {
+        p_tle->event = 0;
+        mca_ccb_event ((tMCA_CCB *) p_tle->param, MCA_CCB_RSP_TOUT_EVT, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         MCA_Init
+**
+** Description      Initialize MCAP main control block.
+**                  This function is called at stack start up.
+**
+** Returns          void
+**
+*******************************************************************************/
+void MCA_Init(void)
+{
+    memset(&mca_cb, 0, sizeof(tMCA_CB));
+
+#if defined(MCA_INITIAL_TRACE_LEVEL)
+    mca_cb.trace_level = MCA_INITIAL_TRACE_LEVEL;
+#else
+    mca_cb.trace_level = BT_TRACE_LEVEL_NONE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         MCA_SetTraceLevel
+**
+** Description      This function sets the debug trace level for MCA.
+**                  If 0xff is passed, the current trace level is returned.
+**
+**                  Input Parameters:
+**                      level:  The level to set the MCA tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new trace level or current trace level if
+**                  the input parameter is 0xff.
+**
+*******************************************************************************/
+UINT8 MCA_SetTraceLevel (UINT8 level)
+{
+    if (level != 0xFF)
+        mca_cb.trace_level = level;
+
+    return (mca_cb.trace_level);
+}
+
+/*******************************************************************************
+**
+** Function         MCA_Register
+**
+** Description      This function registers an MCAP implementation.
+**                  It is assumed that the control channel PSM and data channel
+**                  PSM are not used by any other instances of the stack.
+**                  If the given p_reg->ctrl_psm is 0, this handle is INT only.
+**
+** Returns          0, if failed. Otherwise, the MCA handle.
+**
+*******************************************************************************/
+tMCA_HANDLE MCA_Register(tMCA_REG *p_reg, tMCA_CTRL_CBACK *p_cback)
+{
+    tMCA_RCB    *p_rcb;
+    tMCA_HANDLE handle = 0;
+    tL2CAP_APPL_INFO l2c_cacp_appl;
+    tL2CAP_APPL_INFO l2c_dacp_appl;
+
+    WC_ASSERT(p_reg != NULL );
+    WC_ASSERT(p_cback != NULL );
+
+    MCA_TRACE_API2 ("MCA_Register: ctrl_psm:0x%x, data_psm:0x%x", p_reg->ctrl_psm, p_reg->data_psm);
+
+    if ( (p_rcb = mca_rcb_alloc (p_reg)) != NULL)
+    {
+        if (p_reg->ctrl_psm)
+        {
+            if (L2C_INVALID_PSM(p_reg->ctrl_psm) || L2C_INVALID_PSM(p_reg->data_psm))
+            {
+                MCA_TRACE_ERROR0 ("INVALID_PSM");
+                return 0;
+            }
+
+            l2c_cacp_appl = *(tL2CAP_APPL_INFO *)&mca_l2c_int_appl;
+            l2c_cacp_appl.pL2CA_ConnectCfm_Cb = NULL;
+            l2c_dacp_appl = *(tL2CAP_APPL_INFO *)&l2c_cacp_appl;
+            l2c_cacp_appl.pL2CA_ConnectInd_Cb = mca_l2c_cconn_ind_cback;
+            l2c_dacp_appl.pL2CA_ConnectInd_Cb = mca_l2c_dconn_ind_cback;
+            if (L2CA_Register(p_reg->ctrl_psm, (tL2CAP_APPL_INFO *) &l2c_cacp_appl) &&
+                L2CA_Register(p_reg->data_psm, (tL2CAP_APPL_INFO *) &l2c_dacp_appl))
+            {
+                /* set security level */
+                BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_MCAP_CTRL, p_reg->sec_mask,
+                    p_reg->ctrl_psm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
+
+                /* in theory, we do not need this one for data_psm
+                 * If we don't, L2CAP rejects with security block (3),
+                 * which is different reject code from what MCAP spec suggests.
+                 * we set this one, so mca_l2c_dconn_ind_cback can reject /w no resources (4) */
+                BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_MCAP_DATA, p_reg->sec_mask,
+                    p_reg->data_psm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
+            }
+            else
+            {
+                MCA_TRACE_ERROR0 ("Failed to register to L2CAP");
+                return 0;
+            }
+        }
+        else
+            p_rcb->reg.data_psm = 0;
+        handle = mca_rcb_to_handle (p_rcb);
+        p_rcb->p_cback = p_cback;
+        p_rcb->reg.rsp_tout = p_reg->rsp_tout;
+    }
+    return handle;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_Deregister
+**
+** Description      This function is called to deregister an MCAP implementation.
+**                  Before this function can be called, all control and data
+**                  channels must be removed with MCA_DisconnectReq and MCA_CloseReq.
+**
+** Returns          void
+**
+*******************************************************************************/
+void MCA_Deregister(tMCA_HANDLE handle)
+{
+    tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
+
+    MCA_TRACE_API1 ("MCA_Deregister: %d", handle);
+    if (p_rcb && p_rcb->reg.ctrl_psm)
+    {
+        L2CA_Deregister(p_rcb->reg.ctrl_psm);
+        L2CA_Deregister(p_rcb->reg.data_psm);
+        btm_sec_clr_service_by_psm (p_rcb->reg.ctrl_psm);
+        btm_sec_clr_service_by_psm (p_rcb->reg.data_psm);
+    }
+    mca_rcb_dealloc(handle);
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_CreateDep
+**
+** Description      Create a data endpoint.  If the MDEP is created successfully,
+**                  the MDEP ID is returned in *p_dep. After a data endpoint is
+**                  created, an application can initiate a connection between this
+**                  endpoint and an endpoint on a peer device.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_CreateDep(tMCA_HANDLE handle, tMCA_DEP *p_dep, tMCA_CS *p_cs)
+{
+    tMCA_RESULT result = MCA_BAD_HANDLE;
+    int       i;
+    tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
+    tMCA_CS  *p_depcs;
+
+    WC_ASSERT(p_dep != NULL );
+    WC_ASSERT(p_cs != NULL );
+    WC_ASSERT(p_cs->p_data_cback != NULL );
+
+    MCA_TRACE_API1 ("MCA_CreateDep: %d", handle);
+    if (p_rcb)
+    {
+        if (p_cs->max_mdl > MCA_NUM_MDLS)
+        {
+            MCA_TRACE_ERROR1 ("max_mdl: %d is too big", p_cs->max_mdl );
+            result = MCA_BAD_PARAMS;
+        }
+        else
+        {
+            p_depcs = p_rcb->dep;
+            if (p_cs->type == MCA_TDEP_ECHO)
+            {
+                if (p_depcs->p_data_cback)
+                {
+                    MCA_TRACE_ERROR0 ("Already has ECHO MDEP");
+                    return MCA_NO_RESOURCES;
+                }
+                memcpy (p_depcs, p_cs, sizeof (tMCA_CS));
+                *p_dep = 0;
+                result = MCA_SUCCESS;
+            }
+            else
+            {
+                result = MCA_NO_RESOURCES;
+                /* non-echo MDEP starts from 1 */
+                p_depcs++;
+                for (i=1; i<MCA_NUM_DEPS; i++, p_depcs++)
+                {
+                    if (p_depcs->p_data_cback == NULL)
+                    {
+                        memcpy (p_depcs, p_cs, sizeof (tMCA_CS));
+                        /* internally use type as the mdep id */
+                        p_depcs->type = i;
+                        *p_dep = i;
+                        result = MCA_SUCCESS;
+                        break;
+                    }
+                }
+            }
+        }
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_DeleteDep
+**
+** Description      Delete a data endpoint.  This function is called when
+**                  the implementation is no longer using a data endpoint.
+**                  If this function is called when the endpoint is connected
+**                  the connection is closed and the data endpoint
+**                  is removed.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_DeleteDep(tMCA_HANDLE handle, tMCA_DEP dep)
+{
+    tMCA_RESULT result = MCA_BAD_HANDLE;
+    tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
+    tMCA_DCB *p_dcb;
+    int      i, max;
+    tMCA_CS  *p_depcs;
+
+    MCA_TRACE_API2 ("MCA_DeleteDep: %d dep:%d", handle, dep);
+    if (p_rcb)
+    {
+        if (dep < MCA_NUM_DEPS && p_rcb->dep[dep].p_data_cback)
+        {
+            result = MCA_SUCCESS;
+            p_rcb->dep[dep].p_data_cback = NULL;
+            p_depcs = &(p_rcb->dep[dep]);
+            i = handle - 1;
+            max = MCA_NUM_MDLS*MCA_NUM_LINKS;
+            p_dcb = &mca_cb.dcb[i*max];
+            /* make sure no MDL exists for this MDEP */
+            for (i=0; i<max; i++, p_dcb++)
+            {
+                if (p_dcb->state && p_dcb->p_cs == p_depcs)
+                {
+                    mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
+                }
+            }
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         MCA_ConnectReq
+**
+** Description      This function initiates an MCAP control channel connection
+**                  to the peer device.  When the connection is completed, an
+**                  MCA_CONNECT_IND_EVT is reported to the application via its
+**                  control callback function.
+**                  This control channel is identified by the tMCA_CL.
+**                  If the connection attempt fails, an MCA_DISCONNECT_IND_EVT is
+**                  reported. The security mask parameter overrides the outgoing
+**                  security mask set in MCA_Register().
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_ConnectReq(tMCA_HANDLE handle, BD_ADDR bd_addr,
+                           UINT16 ctrl_psm, UINT16 sec_mask)
+{
+    tMCA_RESULT result = MCA_BAD_HANDLE;
+    tMCA_CCB    *p_ccb;
+    tMCA_TC_TBL *p_tbl;
+
+    MCA_TRACE_API2 ("MCA_ConnectReq: %d psm:0x%x", handle, ctrl_psm);
+    if ((p_ccb = mca_ccb_by_bd(handle, bd_addr)) == NULL)
+        p_ccb = mca_ccb_alloc(handle, bd_addr);
+    else
+    {
+        MCA_TRACE_ERROR0 ("control channel already exists");
+        return MCA_BUSY;
+    }
+
+    if (p_ccb)
+    {
+        p_ccb->ctrl_vpsm = L2CA_Register (ctrl_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
+        result = MCA_NO_RESOURCES;
+        if (p_ccb->ctrl_vpsm)
+        {
+            BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_MCAP_CTRL, sec_mask,
+                p_ccb->ctrl_vpsm, BTM_SEC_PROTO_MCA, MCA_CTRL_TCID);
+            p_ccb->lcid = mca_l2c_open_req(bd_addr, p_ccb->ctrl_vpsm, NULL);
+            if (p_ccb->lcid)
+            {
+                p_tbl = mca_tc_tbl_calloc(p_ccb);
+                if (p_tbl)
+                {
+                    p_tbl->state = MCA_TC_ST_CONN;
+                    p_ccb->sec_mask = sec_mask;
+                    result = MCA_SUCCESS;
+                }
+            }
+        }
+        if (result != MCA_SUCCESS)
+            mca_ccb_dealloc (p_ccb, NULL);
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_DisconnectReq
+**
+** Description      This function disconnect an MCAP control channel
+**                  to the peer device.
+**                  If associated data channel exists, they are disconnected.
+**                  When the MCL is disconnected an MCA_DISCONNECT_IND_EVT is
+**                  reported to the application via its control callback function.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_DisconnectReq(tMCA_CL mcl)
+{
+    tMCA_RESULT result = MCA_BAD_HANDLE;
+    tMCA_CCB *p_ccb = mca_ccb_by_hdl(mcl);
+
+    MCA_TRACE_API1 ("MCA_DisconnectReq: %d ", mcl);
+    if (p_ccb)
+    {
+        result = MCA_SUCCESS;
+        mca_ccb_event (p_ccb, MCA_CCB_API_DISCONNECT_EVT, NULL);
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_CreateMdl
+**
+** Description      This function sends a CREATE_MDL request to the peer device.
+**                  When the response is received, a MCA_CREATE_CFM_EVT is reported
+**                  with the given MDL ID.
+**                  If the response is successful, a data channel is open
+**                  with the given p_chnl_cfg
+**                  If p_chnl_cfg is NULL, the data channel is not initiated until
+**                  MCA_DataChnlCfg is called to provide the p_chnl_cfg.
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_CreateMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
+                                         UINT16 mdl_id, UINT8 peer_dep_id,
+                                         UINT8 cfg, const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    *p_evt_data;
+    tMCA_DCB        *p_dcb;
+
+    MCA_TRACE_API4 ("MCA_CreateMdl: %d dep=%d mdl_id=%d peer_dep_id=%d", mcl, dep, mdl_id, peer_dep_id);
+    if (p_ccb)
+    {
+        if (p_ccb->p_tx_req || p_ccb->p_rx_msg || p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("pending req");
+            return MCA_BUSY;
+        }
+
+        if ((peer_dep_id > MCA_MAX_MDEP_ID) || (!MCA_IS_VALID_MDL_ID(mdl_id)))
+        {
+            MCA_TRACE_ERROR2 ("bad peer dep id:%d or bad mdl id: %d ", peer_dep_id, mdl_id);
+            return MCA_BAD_PARAMS;
+        }
+
+        if (mca_ccb_uses_mdl_id(p_ccb, mdl_id))
+        {
+            MCA_TRACE_ERROR1 ("mdl id: %d is used in the control link", mdl_id);
+            return MCA_BAD_MDL_ID;
+        }
+
+        p_dcb = mca_dcb_alloc(p_ccb, dep);
+        result = MCA_NO_RESOURCES;
+        if (p_dcb)
+        {
+            /* save the info required by dcb connection */
+            p_dcb->p_chnl_cfg       = p_chnl_cfg;
+            p_dcb->mdl_id           = mdl_id;
+            p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
+            if (p_evt_data)
+            {
+                if (!p_ccb->data_vpsm)
+                    p_ccb->data_vpsm = L2CA_Register (data_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
+                if (p_ccb->data_vpsm)
+                {
+                    p_evt_data->dcb_idx     = mca_dcb_to_hdl (p_dcb);
+                    p_evt_data->mdep_id     = peer_dep_id;
+                    p_evt_data->mdl_id      = mdl_id;
+                    p_evt_data->param       = cfg;
+                    p_evt_data->op_code     = MCA_OP_MDL_CREATE_REQ;
+                    p_evt_data->hdr.event   = MCA_CCB_API_REQ_EVT;
+                    p_evt_data->hdr.layer_specific   = FALSE;
+                    mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
+                    return MCA_SUCCESS;
+                }
+                else
+                    GKI_freebuf (p_evt_data);
+            }
+            mca_dcb_dealloc(p_dcb, NULL);
+        }
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_CreateMdlRsp
+**
+** Description      This function sends a CREATE_MDL response to the peer device
+**                  in response to a received MCA_CREATE_IND_EVT.
+**                  If the rsp_code is successful, a data channel is open
+**                  with the given p_chnl_cfg
+**                  When the data channel is open successfully, a MCA_OPEN_IND_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_CreateMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
+                                            UINT16 mdl_id, UINT8 cfg, UINT8 rsp_code,
+                                            const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    evt_data;
+    tMCA_DCB        *p_dcb;
+
+    MCA_TRACE_API5 ("MCA_CreateMdlRsp: %d dep=%d mdl_id=%d cfg=%d rsp_code=%d", mcl, dep, mdl_id, cfg, rsp_code);
+    WC_ASSERT(p_chnl_cfg != NULL );
+    if (p_ccb)
+    {
+        if (p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("congested");
+            return MCA_BUSY;
+        }
+        if (p_ccb->p_rx_msg && (p_ccb->p_rx_msg->mdep_id == dep )
+            && (p_ccb->p_rx_msg->mdl_id == mdl_id) && (p_ccb->p_rx_msg->op_code == MCA_OP_MDL_CREATE_REQ))
+        {
+            result = MCA_SUCCESS;
+            evt_data.dcb_idx    = 0;
+            if (rsp_code == MCA_RSP_SUCCESS)
+            {
+                p_dcb = mca_dcb_alloc(p_ccb, dep);
+                if (p_dcb)
+                {
+                    evt_data.dcb_idx    = mca_dcb_to_hdl(p_dcb);
+                    p_dcb->p_chnl_cfg   = p_chnl_cfg;
+                    p_dcb->mdl_id       = mdl_id;
+                }
+                else
+                {
+                    rsp_code = MCA_RSP_MDEP_BUSY;
+                    result = MCA_NO_RESOURCES;
+                }
+            }
+
+            if (result == MCA_SUCCESS)
+            {
+                evt_data.mdl_id     = mdl_id;
+                evt_data.param      = cfg;
+                evt_data.rsp_code   = rsp_code;
+                evt_data.op_code    = MCA_OP_MDL_CREATE_RSP;
+                mca_ccb_event(p_ccb, MCA_CCB_API_RSP_EVT, (tMCA_CCB_EVT *)&evt_data);
+            }
+        }
+        else
+        {
+            MCA_TRACE_ERROR0 ("The given MCL is not expecting a MCA_CreateMdlRsp with the given parameters" );
+            result = MCA_BAD_PARAMS;
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         MCA_CloseReq
+**
+** Description      Close a data channel.  When the channel is closed, an
+**                  MCA_CLOSE_CFM_EVT is sent to the application via the
+**                  control callback function for this handle.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_CloseReq(tMCA_DL mdl)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
+
+    MCA_TRACE_API1 ("MCA_CloseReq: %d ", mdl);
+    if (p_dcb)
+    {
+        result = MCA_SUCCESS;
+        mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_ReconnectMdl
+**
+** Description      This function sends a RECONNECT_MDL request to the peer device.
+**                  When the response is received, a MCA_RECONNECT_CFM_EVT is reported.
+**                  If p_chnl_cfg is NULL, the data channel is not initiated until
+**                  MCA_DataChnlCfg is called to provide the p_chnl_cfg.
+**                  If the response is successful, a data channel is open.
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_ReconnectMdl(tMCA_CL mcl, tMCA_DEP dep, UINT16 data_psm,
+                                            UINT16 mdl_id, const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    *p_evt_data;
+    tMCA_DCB        *p_dcb;
+
+    MCA_TRACE_API1 ("MCA_ReconnectMdl: %d ", mcl);
+    WC_ASSERT(p_chnl_cfg != NULL );
+    if (p_ccb)
+    {
+        if (p_ccb->p_tx_req || p_ccb->p_rx_msg || p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("pending req");
+            return MCA_BUSY;
+        }
+
+        if (!MCA_IS_VALID_MDL_ID(mdl_id))
+        {
+            MCA_TRACE_ERROR1 ("bad mdl id: %d ", mdl_id);
+            return MCA_BAD_PARAMS;
+        }
+
+        if (mca_ccb_uses_mdl_id(p_ccb, mdl_id))
+        {
+            MCA_TRACE_ERROR1 ("mdl id: %d is used in the control link", mdl_id);
+            return MCA_BAD_MDL_ID;
+        }
+
+        p_dcb = mca_dcb_alloc(p_ccb, dep);
+        result = MCA_NO_RESOURCES;
+        if (p_dcb)
+        {
+            p_dcb->p_chnl_cfg       = p_chnl_cfg;
+            p_dcb->mdl_id           = mdl_id;
+            p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
+            if (p_evt_data)
+            {
+                if (!p_ccb->data_vpsm)
+                    p_ccb->data_vpsm = L2CA_Register (data_psm, (tL2CAP_APPL_INFO *)&mca_l2c_int_appl);
+                p_evt_data->dcb_idx     = mca_dcb_to_hdl(p_dcb);
+                p_evt_data->mdl_id      = mdl_id;
+                p_evt_data->op_code     = MCA_OP_MDL_RECONNECT_REQ;
+                p_evt_data->hdr.event   = MCA_CCB_API_REQ_EVT;
+                mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
+                return MCA_SUCCESS;
+            }
+            mca_dcb_dealloc(p_dcb, NULL);
+        }
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_ReconnectMdlRsp
+**
+** Description      This function sends a RECONNECT_MDL response to the peer device
+**                  in response to a MCA_RECONNECT_IND_EVT event.
+**                  If the response is successful, a data channel is open.
+**                  When the data channel is open successfully, a MCA_OPEN_IND_EVT
+**                  is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_ReconnectMdlRsp(tMCA_CL mcl, tMCA_DEP dep,
+                                               UINT16 mdl_id, UINT8 rsp_code,
+                                               const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    evt_data;
+    tMCA_DCB        *p_dcb;
+
+    MCA_TRACE_API1 ("MCA_ReconnectMdlRsp: %d ", mcl);
+    WC_ASSERT(p_chnl_cfg != NULL );
+    if (p_ccb)
+    {
+        if (p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("congested");
+            return MCA_BUSY;
+        }
+        if (p_ccb->p_rx_msg && (p_ccb->p_rx_msg->mdl_id == mdl_id) &&
+            (p_ccb->p_rx_msg->op_code == MCA_OP_MDL_RECONNECT_REQ))
+        {
+            result = MCA_SUCCESS;
+            evt_data.dcb_idx    = 0;
+            if (rsp_code == MCA_RSP_SUCCESS)
+            {
+                p_dcb = mca_dcb_alloc(p_ccb, dep);
+                if (p_dcb)
+                {
+                    evt_data.dcb_idx    = mca_dcb_to_hdl(p_dcb);
+                    p_dcb->p_chnl_cfg   = p_chnl_cfg;
+                    p_dcb->mdl_id       = mdl_id;
+                }
+                else
+                {
+                    MCA_TRACE_ERROR0 ("Out of MDL for this MDEP");
+                    rsp_code = MCA_RSP_MDEP_BUSY;
+                    result = MCA_NO_RESOURCES;
+                }
+            }
+
+            evt_data.mdl_id     = mdl_id;
+            evt_data.rsp_code   = rsp_code;
+            evt_data.op_code    = MCA_OP_MDL_RECONNECT_RSP;
+            mca_ccb_event(p_ccb, MCA_CCB_API_RSP_EVT, (tMCA_CCB_EVT *)&evt_data);
+        }
+        else
+        {
+            MCA_TRACE_ERROR0 ("The given MCL is not expecting a MCA_ReconnectMdlRsp with the given parameters" );
+            result = MCA_BAD_PARAMS;
+        }
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_DataChnlCfg
+**
+** Description      This function initiates a data channel connection toward the
+**                  connected peer device.
+**                  When the data channel is open successfully, a MCA_OPEN_CFM_EVT
+**                  is reported. This data channel is identified as tMCA_DL.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_DataChnlCfg(tMCA_CL mcl, const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_DCB        *p_dcb;
+    tMCA_TC_TBL *p_tbl;
+
+    MCA_TRACE_API1 ("MCA_DataChnlCfg: %d ", mcl);
+    WC_ASSERT(p_chnl_cfg != NULL );
+    if (p_ccb)
+    {
+        result = MCA_NO_RESOURCES;
+        if ((p_ccb->p_tx_req == NULL) || (p_ccb->status != MCA_CCB_STAT_PENDING) ||
+            ((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) == NULL))
+        {
+            MCA_TRACE_ERROR1 ("The given MCL is not expecting this API:%d", p_ccb->status);
+            return result;
+        }
+
+        p_dcb->p_chnl_cfg       = p_chnl_cfg;
+        BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_MCAP_DATA, p_ccb->sec_mask,
+            p_ccb->data_vpsm, BTM_SEC_PROTO_MCA, p_ccb->p_tx_req->dcb_idx);
+        p_dcb->lcid = mca_l2c_open_req(p_ccb->peer_addr, p_ccb->data_vpsm, p_dcb->p_chnl_cfg);
+        if (p_dcb->lcid)
+        {
+            p_tbl = mca_tc_tbl_dalloc(p_dcb);
+            if (p_tbl)
+            {
+                p_tbl->state = MCA_TC_ST_CONN;
+                result = MCA_SUCCESS;
+            }
+        }
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_Abort
+**
+** Description      This function sends a ABORT_MDL request to the peer device.
+**                  When the response is received, a MCA_ABORT_CFM_EVT is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_Abort(tMCA_CL mcl)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    *p_evt_data;
+    tMCA_DCB        *p_dcb;
+
+    MCA_TRACE_API1 ("MCA_Abort: %d", mcl);
+    if (p_ccb)
+    {
+        result = MCA_NO_RESOURCES;
+        /* verify that we are waiting for data channel to come up with the given mdl */
+        if ((p_ccb->p_tx_req == NULL) || (p_ccb->status != MCA_CCB_STAT_PENDING) ||
+            ((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) == NULL))
+        {
+            MCA_TRACE_ERROR1 ("The given MCL is not expecting this API:%d", p_ccb->status);
+            return result;
+        }
+
+        if (p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("congested");
+            return MCA_BUSY;
+        }
+
+        result = MCA_NO_RESOURCES;
+        p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
+        if (p_evt_data)
+        {
+            result = MCA_SUCCESS;
+            p_evt_data->op_code     = MCA_OP_MDL_ABORT_REQ;
+            p_evt_data->hdr.event   = MCA_CCB_API_REQ_EVT;
+            mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
+        }
+
+    }
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         MCA_Delete
+**
+** Description      This function sends a DELETE_MDL request to the peer device.
+**                  When the response is received, a MCA_DELETE_CFM_EVT is reported.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_Delete(tMCA_CL mcl, UINT16 mdl_id)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_CCB        *p_ccb = mca_ccb_by_hdl(mcl);
+    tMCA_CCB_MSG    *p_evt_data;
+
+    MCA_TRACE_API1 ("MCA_Delete: %d ", mcl);
+    if (p_ccb)
+    {
+        if (p_ccb->cong)
+        {
+            MCA_TRACE_ERROR0 ("congested");
+            return MCA_BUSY;
+        }
+        if (!MCA_IS_VALID_MDL_ID(mdl_id) && (mdl_id != MCA_ALL_MDL_ID))
+        {
+            MCA_TRACE_ERROR1 ("bad mdl id: %d ", mdl_id);
+            return MCA_BAD_PARAMS;
+        }
+        p_evt_data = (tMCA_CCB_MSG *)GKI_getbuf (sizeof(tMCA_CCB_MSG));
+        if (p_evt_data)
+        {
+            result = MCA_SUCCESS;
+            p_evt_data->mdl_id      = mdl_id;
+            p_evt_data->op_code     = MCA_OP_MDL_DELETE_REQ;
+            p_evt_data->hdr.event   = MCA_CCB_API_REQ_EVT;
+            mca_ccb_event(p_ccb, MCA_CCB_API_REQ_EVT, (tMCA_CCB_EVT *)p_evt_data);
+        }
+        else
+            result = MCA_NO_RESOURCES;
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         MCA_WriteReq
+**
+** Description      Send a data packet to the peer device.
+**
+**                  The application passes the packet using the BT_HDR structure.
+**                  The offset field must be equal to or greater than L2CAP_MIN_OFFSET.
+**                  This allows enough space in the buffer for the L2CAP header.
+**
+**                  The memory pointed to by p_pkt must be a GKI buffer
+**                  allocated by the application.  This buffer will be freed
+**                  by the protocol stack; the application must not free
+**                  this buffer.
+**
+** Returns          MCA_SUCCESS if successful, otherwise error.
+**
+*******************************************************************************/
+tMCA_RESULT MCA_WriteReq(tMCA_DL mdl, BT_HDR *p_pkt)
+{
+    tMCA_RESULT     result = MCA_BAD_HANDLE;
+    tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
+    tMCA_DCB_EVT    evt_data;
+
+    MCA_TRACE_API1 ("MCA_WriteReq: %d ", mdl);
+    if (p_dcb)
+    {
+        if (p_dcb->cong)
+        {
+            result = MCA_BUSY;
+        }
+        else
+        {
+            evt_data.p_pkt  = p_pkt;
+            result = MCA_SUCCESS;
+            mca_dcb_event(p_dcb, MCA_DCB_API_WRITE_EVT, &evt_data);
+        }
+    }
+    return result;
+}
+
+/*******************************************************************************
+**
+** Function         MCA_GetL2CapChannel
+**
+** Description      Get the L2CAP CID used by the given data channel handle.
+**
+** Returns          L2CAP channel ID if successful, otherwise 0.
+**
+*******************************************************************************/
+UINT16 MCA_GetL2CapChannel (tMCA_DL mdl)
+{
+    UINT16  lcid = 0;
+    tMCA_DCB *p_dcb = mca_dcb_by_hdl(mdl);
+
+    MCA_TRACE_API1 ("MCA_GetL2CapChannel: %d ", mdl);
+    if (p_dcb)
+        lcid = p_dcb->lcid;
+    return lcid;
+}
+
diff --git a/stack/mcap/mca_cact.c b/stack/mcap/mca_cact.c
new file mode 100644
index 0000000..85f19f4
--- /dev/null
+++ b/stack/mcap/mca_cact.c
@@ -0,0 +1,580 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP Control Channel Action
+ *  Functions.
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "bt_target.h"
+#include "gki.h"
+#include "btm_api.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+
+
+#include  "btu.h"
+/*****************************************************************************
+** constants
+*****************************************************************************/
+/*******************************************************************************
+**
+** Function         mca_ccb_rsp_tout
+**
+** Description      This function processes the response timeout.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_rsp_tout(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+   tMCA_CTRL   evt_data;
+   mca_ccb_report_event(p_ccb, MCA_RSP_TOUT_IND_EVT, &evt_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_report_event
+**
+** Description      This function reports the given event.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_report_event(tMCA_CCB *p_ccb, UINT8 event, tMCA_CTRL *p_data)
+{
+    if (p_ccb && p_ccb->p_rcb && p_ccb->p_rcb->p_cback)
+        (*p_ccb->p_rcb->p_cback)(mca_rcb_to_handle(p_ccb->p_rcb), mca_ccb_to_hdl(p_ccb), event, p_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_free_msg
+**
+** Description      This function frees the received message.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_free_msg(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    GKI_freebuf (p_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_snd_req
+**
+** Description      This function builds a request and sends it to the peer.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_snd_req(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    tMCA_CCB_MSG *p_msg = (tMCA_CCB_MSG *)p_data;
+    BT_HDR  *p_pkt;
+    UINT8   *p, *p_start;
+    BOOLEAN is_abort = FALSE;
+    tMCA_DCB *p_dcb;
+
+    MCA_TRACE_DEBUG2 ("mca_ccb_snd_req cong=%d req=%d", p_ccb->cong, p_msg->op_code);
+    /* check for abort request */
+    if ((p_ccb->status == MCA_CCB_STAT_PENDING) && (p_msg->op_code == MCA_OP_MDL_ABORT_REQ))
+    {
+        p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx);
+        /* the Abort API does not have the associated mdl_id.
+         * Get the mdl_id in dcb to compose the request */
+        p_msg->mdl_id = p_dcb->mdl_id;
+        mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
+        mca_free_buf ((void **)&p_ccb->p_tx_req);
+        p_ccb->status = MCA_CCB_STAT_NORM;
+        is_abort = TRUE;
+    }
+
+    /* no pending outgoing messages or it's an abort request for a pending data channel */
+    if ((!p_ccb->p_tx_req) || is_abort)
+    {
+        p_ccb->p_tx_req = p_msg;
+        if (!p_ccb->cong)
+        {
+            p_pkt = (BT_HDR *)GKI_getbuf (MCA_CTRL_MTU);
+            if (p_pkt)
+            {
+                p_pkt->offset = L2CAP_MIN_OFFSET;
+                p = p_start = (UINT8*)(p_pkt + 1) + L2CAP_MIN_OFFSET;
+                *p++ = p_msg->op_code;
+                UINT16_TO_BE_STREAM (p, p_msg->mdl_id);
+                if (p_msg->op_code == MCA_OP_MDL_CREATE_REQ)
+                {
+                    *p++ = p_msg->mdep_id;
+                    *p++ = p_msg->param;
+                }
+                p_msg->hdr.layer_specific = TRUE;   /* mark this message as sent */
+                p_pkt->len = p - p_start;
+                L2CA_DataWrite (p_ccb->lcid, p_pkt);
+                p_ccb->timer_entry.param = (TIMER_PARAM_TYPE) p_ccb;
+                btu_start_timer(&p_ccb->timer_entry, BTU_TTYPE_MCA_CCB_RSP, p_ccb->p_rcb->reg.rsp_tout);
+            }
+        }
+        /* else the L2CAP channel is congested. keep the message to be sent later */
+    }
+    else
+    {
+        MCA_TRACE_WARNING0 ("dropping api req");
+        GKI_freebuf (p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_snd_rsp
+**
+** Description      This function builds a response and sends it to
+**                  the peer.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_snd_rsp(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    tMCA_CCB_MSG *p_msg = (tMCA_CCB_MSG *)p_data;
+    BT_HDR  *p_pkt;
+    UINT8   *p, *p_start;
+    BOOLEAN chk_mdl = FALSE;
+    tMCA_DCB    *p_dcb;
+
+    MCA_TRACE_DEBUG2 ("mca_ccb_snd_rsp cong=%d req=%d", p_ccb->cong, p_msg->op_code);
+    /* assume that API functions verified the parameters */
+    p_pkt = (BT_HDR *)GKI_getbuf (MCA_CTRL_MTU);
+    if (p_pkt)
+    {
+        p_pkt->offset = L2CAP_MIN_OFFSET;
+        p = p_start = (UINT8*)(p_pkt + 1) + L2CAP_MIN_OFFSET;
+        *p++ = p_msg->op_code;
+        *p++ = p_msg->rsp_code;
+        UINT16_TO_BE_STREAM (p, p_msg->mdl_id);
+        if (p_msg->op_code == MCA_OP_MDL_CREATE_RSP)
+        {
+            *p++ = p_msg->param;
+            chk_mdl = TRUE;
+        }
+        else if (p_msg->op_code == MCA_OP_MDL_RECONNECT_RSP)
+                chk_mdl = TRUE;
+
+        if (chk_mdl && p_msg->rsp_code == MCA_RSP_SUCCESS)
+        {
+            p_dcb = mca_dcb_by_hdl(p_msg->dcb_idx);
+            BTM_SetSecurityLevel(FALSE, "", BTM_SEC_SERVICE_MCAP_DATA, p_ccb->sec_mask,
+                p_ccb->p_rcb->reg.data_psm, BTM_SEC_PROTO_MCA, p_msg->dcb_idx);
+            p_ccb->status = MCA_CCB_STAT_PENDING;
+            /* set p_tx_req to block API_REQ/API_RSP before DL is up */
+            mca_free_buf ((void **)&p_ccb->p_tx_req);
+            p_ccb->p_tx_req = p_ccb->p_rx_msg;
+            p_ccb->p_rx_msg = NULL;
+            p_ccb->p_tx_req->dcb_idx = p_msg->dcb_idx;
+        }
+        mca_free_buf ((void **)&p_ccb->p_rx_msg);
+        p_pkt->len = p - p_start;
+        L2CA_DataWrite (p_ccb->lcid, p_pkt);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_do_disconn
+**
+** Description      This function closes a control channel.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_do_disconn (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    mca_dcb_close_by_mdl_id (p_ccb, MCA_ALL_MDL_ID);
+    L2CA_DisconnectReq(p_ccb->lcid);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_cong
+**
+** Description      This function sets the congestion state for the CCB.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_cong(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    MCA_TRACE_DEBUG2 ("mca_ccb_cong cong=%d/%d", p_ccb->cong, p_data->llcong);
+    p_ccb->cong = p_data->llcong;
+    if (!p_ccb->cong)
+    {
+        /* if there's a held packet, send it now */
+        if (p_ccb->p_tx_req && !p_ccb->p_tx_req->hdr.layer_specific)
+        {
+            p_data = (tMCA_CCB_EVT *)p_ccb->p_tx_req;
+            p_ccb->p_tx_req = NULL;
+            mca_ccb_snd_req (p_ccb, p_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_hdl_req
+**
+** Description      This function is called when a MCAP request is received from
+**                  the peer. It calls the application callback function to
+**                  report the event.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_hdl_req(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    BT_HDR  *p_pkt = &p_data->hdr;
+    BT_HDR  *p_buf;
+    UINT8   *p, *p_start;
+    tMCA_DCB    *p_dcb;
+    tMCA_CTRL       evt_data;
+    tMCA_CCB_MSG    *p_rx_msg = NULL;
+    UINT8           reject_code = MCA_RSP_NO_RESOURCE;
+    BOOLEAN         send_rsp = FALSE;
+    BOOLEAN         check_req = FALSE;
+    UINT8           reject_opcode;
+
+    MCA_TRACE_DEBUG1 ("mca_ccb_hdl_req status:%d", p_ccb->status);
+    p_rx_msg = (tMCA_CCB_MSG *)p_pkt;
+    p = (UINT8 *)(p_pkt + 1) + p_pkt->offset;
+    evt_data.hdr.op_code = *p++;
+    BE_STREAM_TO_UINT16 (evt_data.hdr.mdl_id, p);
+    reject_opcode = evt_data.hdr.op_code+1;
+
+    MCA_TRACE_DEBUG1 ("received mdl id: %d ", evt_data.hdr.mdl_id);
+    if (p_ccb->status == MCA_CCB_STAT_PENDING)
+    {
+        MCA_TRACE_DEBUG0 ("received req inpending state");
+        /* allow abort in pending state */
+        if ((p_ccb->status == MCA_CCB_STAT_PENDING) && (evt_data.hdr.op_code == MCA_OP_MDL_ABORT_REQ))
+        {
+            reject_code = MCA_RSP_SUCCESS;
+            send_rsp = TRUE;
+            /* clear the pending status */
+            p_ccb->status = MCA_CCB_STAT_NORM;
+            if (p_ccb->p_tx_req && ((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx))!= NULL))
+            {
+                mca_dcb_dealloc (p_dcb, NULL);
+                mca_free_buf ((void **)&p_ccb->p_tx_req);
+            }
+        }
+        else
+            reject_code = MCA_RSP_BAD_OP;
+    }
+    else if (p_ccb->p_rx_msg)
+    {
+        MCA_TRACE_DEBUG0 ("still handling prev req");
+        /* still holding previous message, reject this new one ?? */
+
+    }
+    else if (p_ccb->p_tx_req)
+    {
+        MCA_TRACE_DEBUG1 ("still waiting for a response ctrl_vpsm:0x%x", p_ccb->ctrl_vpsm);
+        /* sent a request; waiting for response */
+        if (p_ccb->ctrl_vpsm == 0)
+        {
+            MCA_TRACE_DEBUG0 ("local is ACP. accept the cmd from INT");
+            /* local is acceptor, need to handle the request */
+            check_req = TRUE;
+            reject_code = MCA_RSP_SUCCESS;
+            /* drop the previous request */
+            if ((p_ccb->p_tx_req->op_code == MCA_OP_MDL_CREATE_REQ) &&
+                ((p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) != NULL))
+            {
+                mca_dcb_dealloc(p_dcb, NULL);
+            }
+            mca_free_buf ((void **)&p_ccb->p_tx_req);
+            mca_stop_timer(p_ccb);
+        }
+        else
+        {
+            /*  local is initiator, ignore the req */
+            GKI_freebuf (p_pkt);
+            return;
+        }
+    }
+    else if (p_pkt->layer_specific != MCA_RSP_SUCCESS)
+    {
+
+        reject_code = (UINT8)p_pkt->layer_specific;
+        if (((evt_data.hdr.op_code >= MCA_NUM_STANDARD_OPCODE) &&
+            (evt_data.hdr.op_code < MCA_FIRST_SYNC_OP)) ||
+            (evt_data.hdr.op_code > MCA_LAST_SYNC_OP))
+        {
+            /* invalid op code */
+            reject_opcode = MCA_OP_ERROR_RSP;
+            evt_data.hdr.mdl_id = 0;
+        }
+    }
+    else
+    {
+        check_req = TRUE;
+        reject_code = MCA_RSP_SUCCESS;
+    }
+
+    if (check_req)
+    {
+        if (reject_code == MCA_RSP_SUCCESS)
+        {
+            reject_code = MCA_RSP_BAD_MDL;
+            if (MCA_IS_VALID_MDL_ID(evt_data.hdr.mdl_id) ||
+                ((evt_data.hdr.mdl_id == MCA_ALL_MDL_ID) && (evt_data.hdr.op_code == MCA_OP_MDL_DELETE_REQ)))
+            {
+                reject_code = MCA_RSP_SUCCESS;
+                /* mdl_id is valid according to the spec */
+                switch (evt_data.hdr.op_code)
+                {
+                case MCA_OP_MDL_CREATE_REQ:
+                    evt_data.create_ind.dep_id = *p++;
+                    evt_data.create_ind.cfg = *p++;
+                    p_rx_msg->mdep_id = evt_data.create_ind.dep_id;
+                    if (!mca_is_valid_dep_id(p_ccb->p_rcb, p_rx_msg->mdep_id))
+                    {
+                        MCA_TRACE_ERROR0 ("not a valid local mdep id");
+                        reject_code = MCA_RSP_BAD_MDEP;
+                    }
+                    else if (mca_ccb_uses_mdl_id(p_ccb, evt_data.hdr.mdl_id))
+                    {
+                        MCA_TRACE_DEBUG0 ("the mdl_id is currently used in the CL(create)");
+                        mca_dcb_close_by_mdl_id(p_ccb, evt_data.hdr.mdl_id);
+                    }
+                    else
+                    {
+                        /* check if this dep still have MDL available */
+                        if (mca_dep_free_mdl(p_ccb, evt_data.create_ind.dep_id) == 0)
+                        {
+                            MCA_TRACE_ERROR0 ("the mdep is currently using max_mdl");
+                            reject_code = MCA_RSP_MDEP_BUSY;
+                        }
+                    }
+                    break;
+
+                case MCA_OP_MDL_RECONNECT_REQ:
+                    if (mca_ccb_uses_mdl_id(p_ccb, evt_data.hdr.mdl_id))
+                    {
+                        MCA_TRACE_ERROR0 ("the mdl_id is currently used in the CL(reconn)");
+                        reject_code = MCA_RSP_MDL_BUSY;
+                    }
+                    break;
+
+                case MCA_OP_MDL_ABORT_REQ:
+                    reject_code = MCA_RSP_BAD_OP;
+                    break;
+
+                case MCA_OP_MDL_DELETE_REQ:
+                    /* delete the associated mdl */
+                    mca_dcb_close_by_mdl_id(p_ccb, evt_data.hdr.mdl_id);
+                    send_rsp = TRUE;
+                    break;
+                }
+            }
+        }
+    }
+
+    if (((reject_code != MCA_RSP_SUCCESS) && (evt_data.hdr.op_code != MCA_OP_SYNC_INFO_IND))
+        || send_rsp)
+    {
+        p_buf = (BT_HDR *)GKI_getbuf (MCA_CTRL_MTU);
+        if (p_buf)
+        {
+            p_buf->offset = L2CAP_MIN_OFFSET;
+            p = p_start = (UINT8*)(p_buf + 1) + L2CAP_MIN_OFFSET;
+            *p++ = reject_opcode;
+            *p++ = reject_code;
+            UINT16_TO_BE_STREAM (p, evt_data.hdr.mdl_id);
+            /*
+            if (((*p_start) == MCA_OP_MDL_CREATE_RSP) && (reject_code == MCA_RSP_SUCCESS))
+            {
+                *p++ = evt_data.create_ind.cfg;
+            }
+            */
+
+            p_buf->len = p - p_start;
+            L2CA_DataWrite (p_ccb->lcid, p_buf);
+        }
+    }
+
+    if (reject_code == MCA_RSP_SUCCESS)
+    {
+        /* use the received GKI buffer to store information to double check response API */
+        p_rx_msg->op_code = evt_data.hdr.op_code;
+        p_rx_msg->mdl_id = evt_data.hdr.mdl_id;
+        p_ccb->p_rx_msg = p_rx_msg;
+        if (send_rsp)
+        {
+            GKI_freebuf (p_pkt);
+            p_ccb->p_rx_msg = NULL;
+        }
+        mca_ccb_report_event(p_ccb, evt_data.hdr.op_code, &evt_data);
+    }
+    else
+        GKI_freebuf (p_pkt);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_hdl_rsp
+**
+** Description      This function is called when a MCAP response is received from
+**                  the peer.  It calls the application callback function with
+**                  the results.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_hdl_rsp(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    BT_HDR  *p_pkt = &p_data->hdr;
+    UINT8   *p;
+    tMCA_CTRL   evt_data;
+    BOOLEAN     chk_mdl = FALSE;
+    tMCA_DCB    *p_dcb;
+    tMCA_RESULT result = MCA_BAD_HANDLE;
+    tMCA_TC_TBL *p_tbl;
+
+    if (p_ccb->p_tx_req)
+    {
+        /* verify that the received response matches the sent request */
+        p = (UINT8 *)(p_pkt + 1) + p_pkt->offset;
+        evt_data.hdr.op_code = *p++;
+        if ((evt_data.hdr.op_code == 0) ||
+            ((p_ccb->p_tx_req->op_code + 1) == evt_data.hdr.op_code))
+        {
+            evt_data.rsp.rsp_code = *p++;
+            mca_stop_timer(p_ccb);
+            BE_STREAM_TO_UINT16 (evt_data.hdr.mdl_id, p);
+            if (evt_data.hdr.op_code == MCA_OP_MDL_CREATE_RSP)
+            {
+                evt_data.create_cfm.cfg = *p++;
+                chk_mdl = TRUE;
+            }
+            else if (evt_data.hdr.op_code == MCA_OP_MDL_RECONNECT_RSP)
+                    chk_mdl = TRUE;
+
+            if (chk_mdl)
+            {
+                p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx);
+                if (evt_data.rsp.rsp_code == MCA_RSP_SUCCESS)
+                {
+                    if (evt_data.hdr.mdl_id != p_dcb->mdl_id)
+                    {
+                        MCA_TRACE_ERROR2 ("peer's mdl_id=%d != our mdl_id=%d", evt_data.hdr.mdl_id, p_dcb->mdl_id);
+                        /* change the response code to be an error */
+                        if (evt_data.rsp.rsp_code == MCA_RSP_SUCCESS)
+                        {
+                            evt_data.rsp.rsp_code = MCA_RSP_BAD_MDL;
+                            /* send Abort */
+                            p_ccb->status = MCA_CCB_STAT_PENDING;
+                            MCA_Abort(mca_ccb_to_hdl(p_ccb));
+                        }
+                    }
+                    else if (p_dcb->p_chnl_cfg)
+                    {
+                        /* the data channel configuration is known. Proceed with data channel initiation */
+                        BTM_SetSecurityLevel(TRUE, "", BTM_SEC_SERVICE_MCAP_DATA, p_ccb->sec_mask,
+                            p_ccb->data_vpsm, BTM_SEC_PROTO_MCA, p_ccb->p_tx_req->dcb_idx);
+                        p_dcb->lcid = mca_l2c_open_req(p_ccb->peer_addr, p_ccb->data_vpsm, p_dcb->p_chnl_cfg);
+                        if (p_dcb->lcid)
+                        {
+                            p_tbl = mca_tc_tbl_dalloc(p_dcb);
+                            if (p_tbl)
+                            {
+                                p_tbl->state = MCA_TC_ST_CONN;
+                                p_ccb->status = MCA_CCB_STAT_PENDING;
+                                result = MCA_SUCCESS;
+                            }
+                        }
+                    }
+                    else
+                    {
+                        /* mark this MCL as pending and wait for MCA_DataChnlCfg */
+                        p_ccb->status = MCA_CCB_STAT_PENDING;
+                        result = MCA_SUCCESS;
+                    }
+                }
+
+                if (result != MCA_SUCCESS && p_dcb)
+                {
+                    mca_dcb_dealloc(p_dcb, NULL);
+                }
+            } /* end of chk_mdl */
+
+            if (p_ccb->status != MCA_CCB_STAT_PENDING)
+                mca_free_buf ((void **)&p_ccb->p_tx_req);
+            mca_ccb_report_event(p_ccb, evt_data.hdr.op_code, &evt_data);
+        }
+        /* else a bad response is received */
+    }
+    else
+    {
+        /* not expecting any response. drop it */
+        MCA_TRACE_WARNING0 ("dropping received rsp (not expecting a response)");
+    }
+    GKI_freebuf (p_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_ll_open
+**
+** Description      This function is called to report MCA_CONNECT_IND_EVT event.
+**                  It also clears the congestion flag (ccb.cong).
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_ll_open (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    tMCA_CTRL    evt_data;
+    p_ccb->cong  = FALSE;
+    evt_data.connect_ind.mtu = p_data->open.peer_mtu;
+    memcpy (evt_data.connect_ind.bd_addr, p_ccb->peer_addr, BD_ADDR_LEN);
+    mca_ccb_report_event (p_ccb, MCA_CONNECT_IND_EVT, &evt_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_dl_open
+**
+** Description      This function is called when data channel is open.
+**                  It clears p_tx_req to allow other message exchage on this CL.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_dl_open (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    mca_free_buf ((void **)&p_ccb->p_tx_req);
+    mca_free_buf ((void **)&p_ccb->p_rx_msg);
+    p_ccb->status = MCA_CCB_STAT_NORM;
+}
+
diff --git a/stack/mcap/mca_csm.c b/stack/mcap/mca_csm.c
new file mode 100644
index 0000000..af43bef
--- /dev/null
+++ b/stack/mcap/mca_csm.c
@@ -0,0 +1,385 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP Control channel state
+ *  machine.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+#include  "btu.h"
+
+/*****************************************************************************
+** data channel state machine constants and types
+*****************************************************************************/
+enum
+{
+    MCA_CCB_FREE_MSG,
+    MCA_CCB_SND_REQ,
+    MCA_CCB_SND_RSP,
+    MCA_CCB_DO_DISCONN,
+    MCA_CCB_CONG,
+    MCA_CCB_HDL_REQ,
+    MCA_CCB_HDL_RSP,
+    MCA_CCB_LL_OPEN,
+    MCA_CCB_DL_OPEN,
+    MCA_CCB_DEALLOC,
+    MCA_CCB_RSP_TOUT,
+    MCA_CCB_NUM_ACTIONS
+};
+#define MCA_CCB_IGNORE     MCA_CCB_NUM_ACTIONS
+
+/* action function list */
+const tMCA_CCB_ACTION mca_ccb_action[] = {
+    mca_ccb_free_msg,
+    mca_ccb_snd_req,
+    mca_ccb_snd_rsp,
+    mca_ccb_do_disconn,
+    mca_ccb_cong,
+    mca_ccb_hdl_req,
+    mca_ccb_hdl_rsp,
+    mca_ccb_ll_open,
+    mca_ccb_dl_open,
+    mca_ccb_dealloc,
+    mca_ccb_rsp_tout,
+};
+
+/* state table information */
+#define MCA_CCB_ACTIONS            1       /* number of actions */
+#define MCA_CCB_ACT_COL            0       /* position of action function */
+#define MCA_CCB_NEXT_STATE         1       /* position of next state */
+#define MCA_CCB_NUM_COLS           2       /* number of columns in state tables */
+
+/* state table for opening state */
+const UINT8 mca_ccb_st_opening[][MCA_CCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_CCB_API_CONNECT_EVT    */   {MCA_CCB_IGNORE,     MCA_CCB_OPENING_ST},
+/* MCA_CCB_API_DISCONNECT_EVT */   {MCA_CCB_DO_DISCONN, MCA_CCB_CLOSING_ST},
+/* MCA_CCB_API_REQ_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_OPENING_ST},
+/* MCA_CCB_API_RSP_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_OPENING_ST},
+/* MCA_CCB_MSG_REQ_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_OPENING_ST},
+/* MCA_CCB_MSG_RSP_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_OPENING_ST},
+/* MCA_CCB_DL_OPEN_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_OPENING_ST},
+/* MCA_CCB_LL_OPEN_EVT        */   {MCA_CCB_LL_OPEN,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_LL_CLOSE_EVT       */   {MCA_CCB_DEALLOC,    MCA_CCB_NULL_ST},
+/* MCA_CCB_LL_CONG_EVT        */   {MCA_CCB_CONG,       MCA_CCB_OPENING_ST},
+/* MCA_CCB_RSP_TOUT_EVT       */   {MCA_CCB_IGNORE,     MCA_CCB_OPENING_ST}
+};
+
+/* state table for open state */
+const UINT8 mca_ccb_st_open[][MCA_CCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_CCB_API_CONNECT_EVT    */   {MCA_CCB_IGNORE,     MCA_CCB_OPEN_ST},
+/* MCA_CCB_API_DISCONNECT_EVT */   {MCA_CCB_DO_DISCONN, MCA_CCB_CLOSING_ST},
+/* MCA_CCB_API_REQ_EVT        */   {MCA_CCB_SND_REQ,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_API_RSP_EVT        */   {MCA_CCB_SND_RSP,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_MSG_REQ_EVT        */   {MCA_CCB_HDL_REQ,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_MSG_RSP_EVT        */   {MCA_CCB_HDL_RSP,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_DL_OPEN_EVT        */   {MCA_CCB_DL_OPEN,    MCA_CCB_OPEN_ST},
+/* MCA_CCB_LL_OPEN_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_OPEN_ST},
+/* MCA_CCB_LL_CLOSE_EVT       */   {MCA_CCB_DEALLOC,    MCA_CCB_NULL_ST},
+/* MCA_CCB_LL_CONG_EVT        */   {MCA_CCB_CONG,       MCA_CCB_OPEN_ST},
+/* MCA_CCB_RSP_TOUT_EVT       */   {MCA_CCB_RSP_TOUT,   MCA_CCB_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 mca_ccb_st_closing[][MCA_CCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_CCB_API_CONNECT_EVT    */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_API_DISCONNECT_EVT */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_API_REQ_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_CLOSING_ST},
+/* MCA_CCB_API_RSP_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_MSG_REQ_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_CLOSING_ST},
+/* MCA_CCB_MSG_RSP_EVT        */   {MCA_CCB_FREE_MSG,   MCA_CCB_CLOSING_ST},
+/* MCA_CCB_DL_OPEN_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_LL_OPEN_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_LL_CLOSE_EVT       */   {MCA_CCB_DEALLOC,    MCA_CCB_NULL_ST},
+/* MCA_CCB_LL_CONG_EVT        */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST},
+/* MCA_CCB_RSP_TOUT_EVT       */   {MCA_CCB_IGNORE,     MCA_CCB_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tMCA_CCB_ST_TBL)[MCA_CCB_NUM_COLS];
+
+/* state table */
+const tMCA_CCB_ST_TBL mca_ccb_st_tbl[] = {
+    mca_ccb_st_opening,
+    mca_ccb_st_open,
+    mca_ccb_st_closing
+};
+
+#if (BT_TRACE_VERBOSE == TRUE)
+/* verbose event strings for trace */
+static const char * const mca_ccb_evt_str[] = {
+    "API_CONNECT_EVT",
+    "API_DISCONNECT_EVT",
+    "API_REQ_EVT",
+    "API_RSP_EVT",
+    "MSG_REQ_EVT",
+    "MSG_RSP_EVT",
+    "DL_OPEN_EVT",
+    "LL_OPEN_EVT",
+    "LL_CLOSE_EVT",
+    "LL_CONG_EVT",
+    "RSP_TOUT_EVT"
+};
+/* verbose state strings for trace */
+static const char * const mca_ccb_st_str[] = {
+    "NULL_ST",
+    "OPENING_ST",
+    "OPEN_ST",
+    "CLOSING_ST"
+};
+#endif
+
+/*******************************************************************************
+**
+** Function         mca_stop_timer
+**
+** Description      This function is stop a MCAP timer
+**
+**                  This function is for use internal to MCAP only.
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_stop_timer(tMCA_CCB *p_ccb)
+{
+    if (p_ccb->timer_entry.event == BTU_TTYPE_MCA_CCB_RSP)
+    {
+        btu_stop_timer(&p_ccb->timer_entry);
+        p_ccb->timer_entry.event = 0;
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_event
+**
+** Description      This function is the CCB state machine main function.
+**                  It uses the state and action function tables to execute
+**                  action functions.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_event(tMCA_CCB *p_ccb, UINT8 event, tMCA_CCB_EVT *p_data)
+{
+    tMCA_CCB_ST_TBL    state_table;
+    UINT8              action;
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    MCA_TRACE_EVENT3("CCB ccb=%d event=%s state=%s", mca_ccb_to_hdl(p_ccb), mca_ccb_evt_str[event], mca_ccb_st_str[p_ccb->state]);
+#else
+    MCA_TRACE_EVENT3("CCB ccb=%d event=%d state=%d", mca_ccb_to_hdl(p_ccb), event, p_ccb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = mca_ccb_st_tbl[p_ccb->state - 1];
+
+    /* set next state */
+    p_ccb->state = state_table[event][MCA_CCB_NEXT_STATE];
+
+    /* execute action functions */
+    if ((action = state_table[event][MCA_CCB_ACT_COL]) != MCA_CCB_IGNORE)
+    {
+        (*mca_ccb_action[action])(p_ccb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_by_bd
+**
+** Description      This function looks up the CCB based on the BD address.
+**                  It returns a pointer to the CCB.
+**                  If no CCB is found it returns NULL.
+**
+** Returns          void.
+**
+*******************************************************************************/
+tMCA_CCB *mca_ccb_by_bd(tMCA_HANDLE handle, BD_ADDR bd_addr)
+{
+    tMCA_CCB *p_ccb = NULL;
+    tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
+    tMCA_CCB *p_ccb_tmp;
+    int       i;
+
+    if (p_rcb)
+    {
+        i = handle-1;
+        p_ccb_tmp = &mca_cb.ccb[i*MCA_NUM_LINKS];
+        for (i=0; i<MCA_NUM_LINKS; i++, p_ccb_tmp++)
+        {
+            if (p_ccb_tmp->state != MCA_CCB_NULL_ST && memcmp(p_ccb_tmp->peer_addr, bd_addr, BD_ADDR_LEN) == 0)
+            {
+                p_ccb = p_ccb_tmp;
+                break;
+            }
+        }
+    }
+    return p_ccb;
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_alloc
+**
+** Description      This function allocates a CCB and copies the BD address to
+**                  the CCB.  It returns a pointer to the CCB.  If no CCB can
+**                  be allocated it returns NULL.
+**
+** Returns          void.
+**
+*******************************************************************************/
+tMCA_CCB *mca_ccb_alloc(tMCA_HANDLE handle, BD_ADDR bd_addr)
+{
+    tMCA_CCB *p_ccb = NULL;
+    tMCA_RCB *p_rcb = mca_rcb_by_handle(handle);
+    tMCA_CCB *p_ccb_tmp;
+    int       i;
+
+    MCA_TRACE_DEBUG1("mca_ccb_alloc handle:0x%x", handle);
+    if (p_rcb)
+    {
+        i = handle-1;
+        p_ccb_tmp = &mca_cb.ccb[i*MCA_NUM_LINKS];
+        for (i=0; i<MCA_NUM_LINKS; i++, p_ccb_tmp++)
+        {
+            if (p_ccb_tmp->state == MCA_CCB_NULL_ST)
+            {
+                p_ccb_tmp->p_rcb = p_rcb;
+                p_ccb_tmp->state = MCA_CCB_OPENING_ST;
+                p_ccb_tmp->cong  = TRUE;
+                memcpy(p_ccb_tmp->peer_addr, bd_addr, BD_ADDR_LEN);
+                p_ccb = p_ccb_tmp;
+                break;
+            }
+        }
+    }
+    return p_ccb;
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_ccb_dealloc
+**
+** Description      This function deallocates a CCB.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_ccb_dealloc(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data)
+{
+    tMCA_CTRL   evt_data;
+
+    MCA_TRACE_DEBUG1("mca_ccb_dealloc ctrl_vpsm:0x%x", p_ccb->ctrl_vpsm);
+    mca_dcb_close_by_mdl_id (p_ccb, MCA_ALL_MDL_ID);
+    if (p_ccb->ctrl_vpsm)
+    {
+        L2CA_Deregister (p_ccb->ctrl_vpsm);
+    }
+    if (p_ccb->data_vpsm)
+    {
+        L2CA_Deregister (p_ccb->data_vpsm);
+    }
+    mca_free_buf ((void **)&p_ccb->p_rx_msg);
+    mca_free_buf ((void **)&p_ccb->p_tx_req);
+    mca_stop_timer(p_ccb);
+
+    if (p_data)
+    {
+        /* non-NULL -> an action function -> report disconnect event */
+        memcpy (evt_data.disconnect_ind.bd_addr, p_ccb->peer_addr, BD_ADDR_LEN);
+        evt_data.disconnect_ind.reason = p_data->close.reason;
+        mca_ccb_report_event(p_ccb, MCA_DISCONNECT_IND_EVT, &evt_data);
+    }
+    mca_free_tc_tbl_by_lcid (p_ccb->lcid);
+    memset (p_ccb, 0, sizeof (tMCA_CCB));
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_to_hdl
+**
+** Description      This function converts a pointer to a CCB to a tMCA_CL
+**                  and returns the value.
+**
+** Returns          void.
+**
+*******************************************************************************/
+tMCA_CL mca_ccb_to_hdl(tMCA_CCB *p_ccb)
+{
+    return (UINT8) (p_ccb - mca_cb.ccb + 1);
+}
+
+/*******************************************************************************
+**
+** Function         mca_ccb_by_hdl
+**
+** Description      This function converts an index value to a CCB.  It returns
+**                  a pointer to the CCB.  If no valid CCB matches the index it
+**                  returns NULL.
+**
+** Returns          void.
+**
+*******************************************************************************/
+tMCA_CCB *mca_ccb_by_hdl(tMCA_CL mcl)
+{
+    tMCA_CCB * p_ccb = NULL;
+    if (mcl && mcl <= MCA_NUM_CCBS && mca_cb.ccb[mcl-1].state)
+        p_ccb = &mca_cb.ccb[mcl-1];
+    return p_ccb;
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_ccb_uses_mdl_id
+**
+** Description      This function checkes if a given mdl_id is in use.
+**
+** Returns          TRUE, if the given mdl_id is currently used in the MCL.
+**
+*******************************************************************************/
+BOOLEAN mca_ccb_uses_mdl_id(tMCA_CCB *p_ccb, UINT16 mdl_id)
+{
+    BOOLEAN uses = FALSE;
+    tMCA_DCB *p_dcb;
+    int       i;
+
+    i = mca_ccb_to_hdl(p_ccb)-1;
+    p_dcb = &mca_cb.dcb[i*MCA_NUM_MDLS];
+    for (i=0; i<MCA_NUM_MDLS; i++, p_dcb++)
+    {
+        if (p_dcb->state != MCA_DCB_NULL_ST && p_dcb->mdl_id == mdl_id)
+        {
+            uses = TRUE;
+            break;
+        }
+    }
+
+    return uses;
+}
diff --git a/stack/mcap/mca_dact.c b/stack/mcap/mca_dact.c
new file mode 100644
index 0000000..353153e
--- /dev/null
+++ b/stack/mcap/mca_dact.c
@@ -0,0 +1,162 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP Data Channel Action
+ *  Functions.
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+#include "gki.h"
+#include "mca_api.h"
+#include "mca_int.h"
+
+/*******************************************************************************
+**
+** Function         mca_dcb_report_cong
+**
+** Description      This function is called to report the congestion flag.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_report_cong (tMCA_DCB *p_dcb)
+{
+    tMCA_CTRL   evt_data;
+
+    evt_data.cong_chg.cong   = p_dcb->cong;
+    evt_data.cong_chg.mdl    = mca_dcb_to_hdl(p_dcb);
+    evt_data.cong_chg.mdl_id = p_dcb->mdl_id;
+    mca_ccb_report_event (p_dcb->p_ccb, MCA_CONG_CHG_EVT, &evt_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_tc_open
+**
+** Description      This function is called to report MCA_OPEN_IND_EVT or
+**                  MCA_OPEN_CFM_EVT event.
+**                  It also clears the congestion flag (dcb.cong).
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_tc_open (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    tMCA_CTRL   evt_data;
+    tMCA_CCB    *p_ccb = p_dcb->p_ccb;
+    UINT8       event = MCA_OPEN_IND_EVT;
+
+    if (p_data->open.param == MCA_INT)
+        event = MCA_OPEN_CFM_EVT;
+    p_dcb->cong  = FALSE;
+    evt_data.open_cfm.mtu       = p_data->open.peer_mtu;
+    evt_data.open_cfm.mdl_id    = p_dcb->mdl_id;
+    evt_data.open_cfm.mdl       = mca_dcb_to_hdl(p_dcb);
+    mca_ccb_event (p_ccb, MCA_CCB_DL_OPEN_EVT, NULL);
+    mca_ccb_report_event (p_ccb, event, &evt_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_cong
+**
+** Description      This function sets the congestion state for the DCB.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_cong (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    p_dcb->cong  = p_data->llcong;
+    mca_dcb_report_cong(p_dcb);
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_free_data
+**
+** Description      This function frees the received message.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_free_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    GKI_freebuf (p_data);
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_do_disconn
+**
+** Description      This function closes a data channel.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_do_disconn (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    tMCA_CLOSE  close;
+    if ((p_dcb->lcid == 0) || (L2CA_DisconnectReq(p_dcb->lcid) == FALSE))
+    {
+        close.param  = MCA_INT;
+        close.reason = L2CAP_DISC_OK;
+        close.lcid   = 0;
+        mca_dcb_event(p_dcb, MCA_DCB_TC_CLOSE_EVT, (tMCA_DCB_EVT *) &close);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_snd_data
+**
+** Description      This function sends the data from application to the peer device.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_snd_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    UINT8   status;
+
+    /* do not need to check cong, because API already checked the status */
+    status = L2CA_DataWrite (p_dcb->lcid, p_data->p_pkt);
+    if (status == L2CAP_DW_CONGESTED)
+    {
+        p_dcb->cong = TRUE;
+        mca_dcb_report_cong(p_dcb);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_hdl_data
+**
+** Description      This function reports the received data through the data
+**                  callback function.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_hdl_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    (*p_dcb->p_cs->p_data_cback) (mca_dcb_to_hdl(p_dcb), (BT_HDR *)p_data);
+}
+
diff --git a/stack/mcap/mca_dsm.c b/stack/mcap/mca_dsm.c
new file mode 100644
index 0000000..255b5d4
--- /dev/null
+++ b/stack/mcap/mca_dsm.c
@@ -0,0 +1,346 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP Data chahnel state machine.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+
+/*****************************************************************************
+** data channel state machine constants and types
+*****************************************************************************/
+enum
+{
+    MCA_DCB_TC_OPEN,
+    MCA_DCB_CONG,
+    MCA_DCB_FREE_DATA,
+    MCA_DCB_DEALLOC,
+    MCA_DCB_DO_DISCONN,
+    MCA_DCB_SND_DATA,
+    MCA_DCB_HDL_DATA,
+    MCA_DCB_NUM_ACTIONS
+};
+#define MCA_DCB_IGNORE     MCA_DCB_NUM_ACTIONS
+
+/* action function list */
+const tMCA_DCB_ACTION mca_dcb_action[] = {
+    mca_dcb_tc_open,
+    mca_dcb_cong,
+    mca_dcb_free_data,
+    mca_dcb_dealloc,
+    mca_dcb_do_disconn,
+    mca_dcb_snd_data,
+    mca_dcb_hdl_data
+};
+
+/* state table information */
+#define MCA_DCB_ACTIONS            1       /* number of actions */
+#define MCA_DCB_ACT_COL            0       /* position of action function */
+#define MCA_DCB_NEXT_STATE         1       /* position of next state */
+#define MCA_DCB_NUM_COLS           2       /* number of columns in state tables */
+
+/* state table for opening state */
+const UINT8 mca_dcb_st_opening[][MCA_DCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_DCB_API_CLOSE_EVT    */   {MCA_DCB_DO_DISCONN,   MCA_DCB_CLOSING_ST},
+/* MCA_DCB_API_WRITE_EVT    */   {MCA_DCB_IGNORE,       MCA_DCB_OPENING_ST},
+/* MCA_DCB_TC_OPEN_EVT      */   {MCA_DCB_TC_OPEN,      MCA_DCB_OPEN_ST},
+/* MCA_DCB_TC_CLOSE_EVT     */   {MCA_DCB_DEALLOC,      MCA_DCB_NULL_ST},
+/* MCA_DCB_TC_CONG_EVT      */   {MCA_DCB_CONG,         MCA_DCB_OPENING_ST},
+/* MCA_DCB_TC_DATA_EVT      */   {MCA_DCB_FREE_DATA,    MCA_DCB_OPENING_ST}
+};
+
+/* state table for open state */
+const UINT8 mca_dcb_st_open[][MCA_DCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_DCB_API_CLOSE_EVT    */   {MCA_DCB_DO_DISCONN,   MCA_DCB_CLOSING_ST},
+/* MCA_DCB_API_WRITE_EVT    */   {MCA_DCB_SND_DATA,     MCA_DCB_OPEN_ST},
+/* MCA_DCB_TC_OPEN_EVT      */   {MCA_DCB_IGNORE,       MCA_DCB_OPEN_ST},
+/* MCA_DCB_TC_CLOSE_EVT     */   {MCA_DCB_DEALLOC,      MCA_DCB_NULL_ST},
+/* MCA_DCB_TC_CONG_EVT      */   {MCA_DCB_CONG,         MCA_DCB_OPEN_ST},
+/* MCA_DCB_TC_DATA_EVT      */   {MCA_DCB_HDL_DATA,     MCA_DCB_OPEN_ST}
+};
+
+/* state table for closing state */
+const UINT8 mca_dcb_st_closing[][MCA_DCB_NUM_COLS] = {
+/* Event                            Action              Next State */
+/* MCA_DCB_API_CLOSE_EVT    */   {MCA_DCB_IGNORE,       MCA_DCB_CLOSING_ST},
+/* MCA_DCB_API_WRITE_EVT    */   {MCA_DCB_IGNORE,       MCA_DCB_CLOSING_ST},
+/* MCA_DCB_TC_OPEN_EVT      */   {MCA_DCB_TC_OPEN,      MCA_DCB_OPEN_ST},
+/* MCA_DCB_TC_CLOSE_EVT     */   {MCA_DCB_DEALLOC,      MCA_DCB_NULL_ST},
+/* MCA_DCB_TC_CONG_EVT      */   {MCA_DCB_IGNORE,       MCA_DCB_CLOSING_ST},
+/* MCA_DCB_TC_DATA_EVT      */   {MCA_DCB_FREE_DATA,    MCA_DCB_CLOSING_ST}
+};
+
+/* type for state table */
+typedef const UINT8 (*tMCA_DCB_ST_TBL)[MCA_DCB_NUM_COLS];
+
+/* state table */
+const tMCA_DCB_ST_TBL mca_dcb_st_tbl[] = {
+    mca_dcb_st_opening,
+    mca_dcb_st_open,
+    mca_dcb_st_closing
+};
+
+#if (BT_TRACE_VERBOSE == TRUE)
+/* verbose event strings for trace */
+const char * const mca_dcb_evt_str[] = {
+    "API_CLOSE_EVT",
+    "API_WRITE_EVT",
+    "TC_OPEN_EVT",
+    "TC_CLOSE_EVT",
+    "TC_CONG_EVT",
+    "TC_DATA_EVT"
+};
+/* verbose state strings for trace */
+const char * const mca_dcb_st_str[] = {
+    "NULL_ST",
+    "OPENING_ST",
+    "OPEN_ST",
+    "CLOSING_ST"
+};
+#endif
+
+/*******************************************************************************
+**
+** Function         mca_dcb_event
+**
+** Description      This function is the DCB state machine main function.
+**                  It uses the state and action function tables to execute
+**                  action functions.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_event(tMCA_DCB *p_dcb, UINT8 event, tMCA_DCB_EVT *p_data)
+{
+    tMCA_DCB_ST_TBL    state_table;
+    UINT8              action;
+
+    if (p_dcb == NULL)
+        return;
+#if (BT_TRACE_VERBOSE == TRUE)
+    MCA_TRACE_EVENT3("DCB dcb=%d event=%s state=%s", mca_dcb_to_hdl(p_dcb), mca_dcb_evt_str[event], mca_dcb_st_str[p_dcb->state]);
+#else
+    MCA_TRACE_EVENT3("DCB dcb=%d event=%d state=%d", mca_dcb_to_hdl(p_dcb), event, p_dcb->state);
+#endif
+
+    /* look up the state table for the current state */
+    state_table = mca_dcb_st_tbl[p_dcb->state - 1];
+
+    /* set next state */
+    p_dcb->state = state_table[event][MCA_DCB_NEXT_STATE];
+
+    /* execute action functions */
+    if ((action = state_table[event][MCA_DCB_ACT_COL]) != MCA_DCB_IGNORE)
+    {
+        (*mca_dcb_action[action])(p_dcb, p_data);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_alloc
+**
+** Description      This function is called to allocate an DCB.
+**                  It initializes the DCB with the data passed to the function.
+**
+** Returns          tMCA_DCB *
+**
+*******************************************************************************/
+tMCA_DCB *mca_dcb_alloc(tMCA_CCB*p_ccb, tMCA_DEP dep)
+{
+    tMCA_DCB *p_dcb = NULL, *p_dcb_tmp;
+    tMCA_RCB *p_rcb = p_ccb->p_rcb;
+    tMCA_CS  *p_cs;
+    int       i, max;
+
+    if (dep < MCA_NUM_DEPS)
+    {
+        p_cs = &p_rcb->dep[dep];
+        i = mca_ccb_to_hdl(p_ccb)-1;
+        p_dcb_tmp = &mca_cb.dcb[i*MCA_NUM_MDLS];
+        /* make sure p_cs->max_mdl is smaller than MCA_NUM_MDLS at MCA_CreateDep */
+        max = p_cs->max_mdl;
+        for (i=0; i<max; i++, p_dcb_tmp++)
+        {
+            if (p_dcb_tmp->state == MCA_DCB_NULL_ST)
+            {
+                p_dcb_tmp->p_ccb = p_ccb;
+                p_dcb_tmp->state = MCA_DCB_OPENING_ST;
+                p_dcb_tmp->cong  = TRUE;
+                p_dcb_tmp->p_cs  = p_cs;
+                p_dcb = p_dcb_tmp;
+                break;
+            }
+        }
+    }
+    return p_dcb;
+}
+
+/*******************************************************************************
+**
+** Function         mca_dep_free_mdl
+**
+** Description      This function is called to check the number of free mdl for
+**                  the given dep.
+**
+** Returns          the number of free mdl for the given dep
+**
+*******************************************************************************/
+UINT8 mca_dep_free_mdl(tMCA_CCB *p_ccb, tMCA_DEP dep)
+{
+    tMCA_DCB *p_dcb;
+    tMCA_RCB *p_rcb = p_ccb->p_rcb;
+    tMCA_CS  *p_cs;
+    int       i, max;
+    UINT8   count = 0;
+    UINT8   left;
+
+    if (dep < MCA_NUM_DEPS)
+    {
+        p_cs = &p_rcb->dep[dep];
+        i = mca_ccb_to_hdl(p_ccb)-1;
+        p_dcb = &mca_cb.dcb[i * MCA_NUM_MDLS];
+        /* make sure p_cs->max_mdl is smaller than MCA_NUM_MDLS at MCA_CreateDep */
+        max = p_cs->max_mdl;
+        for (i=0; i<max; i++, p_dcb++)
+        {
+            if ((p_dcb->state != MCA_DCB_NULL_ST) && (p_dcb->p_cs == p_cs))
+            {
+                count++;
+                break;
+            }
+        }
+    }
+    else
+    {
+        max = 0;
+        MCA_TRACE_WARNING0("Invalid Dep ID");
+    }
+    left = max - count;
+    return left;
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_dealloc
+**
+** Description      This function deallocates an DCB.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_dcb_dealloc(tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data)
+{
+    tMCA_CCB *p_ccb = p_dcb->p_ccb;
+    UINT8    event = MCA_CLOSE_IND_EVT;
+    tMCA_CTRL   evt_data;
+
+    MCA_TRACE_DEBUG0("mca_dcb_dealloc");
+    mca_free_buf ((void **)&p_dcb->p_data);
+    if (p_data)
+    {
+        /* non-NULL -> an action function -> report disconnect event */
+        evt_data.close_cfm.mdl      = mca_dcb_to_hdl(p_dcb);
+        evt_data.close_cfm.reason   = p_data->close.reason;
+        evt_data.close_cfm.mdl_id   = p_dcb->mdl_id;
+        if (p_data->close.param == MCA_INT)
+            event = MCA_CLOSE_CFM_EVT;
+        if (p_data->close.lcid)
+            mca_ccb_report_event(p_ccb, event, &evt_data);
+    }
+    mca_free_tc_tbl_by_lcid (p_dcb->lcid);
+    memset (p_dcb, 0, sizeof (tMCA_DCB));
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_to_hdl
+**
+** Description      This function converts a pointer to an DCB to a handle (tMCA_DL).
+**                  It returns the handle.
+**
+** Returns          tMCA_DL.
+**
+*******************************************************************************/
+tMCA_DL mca_dcb_to_hdl(tMCA_DCB *p_dcb)
+{
+    return (UINT8) (p_dcb - mca_cb.dcb + 1);
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_by_hdl
+**
+** Description      This function finds the DCB for a handle (tMCA_DL).
+**                  It returns a pointer to the DCB.
+**                  If no DCB matches the handle it returns NULL.
+**
+** Returns          tMCA_DCB *
+**
+*******************************************************************************/
+tMCA_DCB *mca_dcb_by_hdl(tMCA_DL hdl)
+{
+    tMCA_DCB * p_dcb = NULL;
+    if (hdl && hdl <= MCA_NUM_DCBS && mca_cb.dcb[hdl-1].state)
+        p_dcb = &mca_cb.dcb[hdl-1];
+    return p_dcb;
+}
+
+/*******************************************************************************
+**
+** Function         mca_dcb_close_by_mdl_id
+**
+** Description      This function finds the DCB for a mdl_id and
+**                  disconnect the mdl
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_dcb_close_by_mdl_id(tMCA_CCB*p_ccb, UINT16 mdl_id)
+{
+    tMCA_DCB *p_dcb;
+    int       i;
+
+    MCA_TRACE_DEBUG1("mca_dcb_close_by_mdl_id mdl_id=%d", mdl_id);
+    i = mca_ccb_to_hdl(p_ccb)-1;
+    p_dcb = &mca_cb.dcb[i*MCA_NUM_MDLS];
+    for (i=0; i<MCA_NUM_MDLS; i++, p_dcb++)
+    {
+        if (p_dcb->state)
+        {
+            if (p_dcb->mdl_id == mdl_id)
+            {
+                mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
+                break;
+            }
+            else if (mdl_id == MCA_ALL_MDL_ID)
+            {
+                mca_dcb_event(p_dcb, MCA_DCB_API_CLOSE_EVT, NULL);
+            }
+        }
+    }
+}
diff --git a/stack/mcap/mca_int.h b/stack/mcap/mca_int.h
new file mode 100644
index 0000000..2563f7f
--- /dev/null
+++ b/stack/mcap/mca_int.h
@@ -0,0 +1,356 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains interfaces which are internal to MCAP.
+ *
+ ******************************************************************************/
+#ifndef MCA_INT_H
+#define MCA_INT_H
+#include "gki.h"
+#include "mca_api.h"
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* INT initiates the L2CAP channel */
+#define MCA_ACP     0
+#define MCA_INT     1
+
+/*****************************************************************************
+**  Type Definitions
+*****************************************************************************/
+
+/* Header structure for api/received request/response. */
+typedef struct {
+    BT_HDR          hdr;        /* layer specific information */
+    UINT8           op_code;    /* the request/response opcode */
+    UINT8           rsp_code;   /* valid only if op_code is a response */
+    UINT16          mdl_id;     /* the MDL ID associated with this request/response */
+    UINT8           param;      /* other parameter */
+    UINT8           mdep_id;    /* the MDEP ID associated with this request/response */
+    /* tMCA_HANDLE     rcb_idx;    For internal use only */
+    /* tMCA_CL         ccb_idx;    For internal use only */
+    tMCA_DL         dcb_idx;    /* For internal use only */
+} tMCA_CCB_MSG;
+
+/* This data structure is associated with the AVDT_OPEN_IND_EVT and AVDT_OPEN_CFM_EVT. */
+typedef struct {
+    BT_HDR          hdr;                /* Event header */
+    UINT16          peer_mtu;           /* Transport channel L2CAP MTU of the peer */
+    UINT16          lcid;               /* L2CAP LCID  */
+    UINT8           param;
+} tMCA_OPEN;
+
+typedef struct {
+    UINT16          reason;     /* disconnect reason from L2CAP */
+    UINT8           param;      /* MCA_INT or MCA_ACP */
+    UINT16          lcid;       /* L2CAP LCID  */
+} tMCA_CLOSE;
+
+/* Header structure for state machine event parameters. */
+typedef union {
+    BT_HDR          hdr;        /* layer specific information */
+    tMCA_CCB_MSG    api;
+    BOOLEAN         llcong;
+    UINT8           param;
+    tMCA_OPEN       open;
+    tMCA_CLOSE      close;
+} tMCA_CCB_EVT;
+
+/* control channel states */
+enum
+{
+    MCA_CCB_NULL_ST,        /* not allocated */
+    MCA_CCB_OPENING_ST,
+    MCA_CCB_OPEN_ST,        /* open */
+    MCA_CCB_CLOSING_ST,		/* disconnecting */
+    MCA_CCB_MAX_ST
+};
+typedef UINT8 tMCA_CCB_STATE;
+
+/* control channel events */
+enum
+{
+    MCA_CCB_API_CONNECT_EVT,    /* application initiates a connect request. */
+    MCA_CCB_API_DISCONNECT_EVT, /* application initiates a disconnect request. */
+    MCA_CCB_API_REQ_EVT,        /* application initiates a request. The request may be create_mdl, delete_mdl, reconnect_mdl or abort_mdl. */
+    MCA_CCB_API_RSP_EVT,        /* application initiates a create_mdl or reconnect_mdl response. */
+    MCA_CCB_MSG_REQ_EVT,        /* a create_mdl, delete_mdl, reconnect_mdl or abort_mdl request message is received from the peer. */
+    MCA_CCB_MSG_RSP_EVT,        /* Response received event.  This event is sent whenever a response message is received for an outstanding request message. */
+    MCA_CCB_DL_OPEN_EVT,        /* data channel open. */
+    MCA_CCB_LL_OPEN_EVT,        /* Lower layer open.  This event is sent when the lower layer channel is open.  */
+    MCA_CCB_LL_CLOSE_EVT,       /* Lower layer close.  This event is sent when the lower layer channel is closed. */
+    MCA_CCB_LL_CONG_EVT,        /* Lower layer congestion.  This event is sent when the lower layer is congested. */
+    MCA_CCB_RSP_TOUT_EVT        /* time out for waiting the message response on the control channel */
+};
+
+/* Header structure for callback event parameters. */
+typedef union {
+    tMCA_OPEN       open;
+    tMCA_CLOSE      close;
+    BT_HDR          hdr;        /* layer specific information */
+    BT_HDR          *p_pkt;
+    BOOLEAN         llcong;
+    UINT16          mdl_id;     /* the MDL ID associated with this request/response */
+    /* tMCA_HANDLE     rcb_idx;    For internal use only */
+    /* tMCA_CL         ccb_idx;    For internal use only */
+    /* tMCA_DL         dcb_idx;    For internal use only */
+} tMCA_DCB_EVT;
+
+/* data channel states */
+enum
+{
+    MCA_DCB_NULL_ST,        /* not allocated */
+    MCA_DCB_OPENING_ST,     /* create/reconnect sequence is successful, waiting for data channel connection */
+    MCA_DCB_OPEN_ST,        /* open */
+    MCA_DCB_CLOSING_ST,     /* disconnecting */
+    MCA_DCB_MAX_ST
+};
+typedef UINT8 tMCA_DCB_STATE;
+
+/* data channel events */
+enum
+{
+    MCA_DCB_API_CLOSE_EVT,      /* This event is sent when the application wants to disconnect the data channel.*/
+    MCA_DCB_API_WRITE_EVT,      /* This event is sent when the application wants to send a data packet to the peer.*/
+    MCA_DCB_TC_OPEN_EVT,        /* Transport Channel open.  This event is sent when the channel is open.*/
+    MCA_DCB_TC_CLOSE_EVT,       /* Transport Channel close.*/
+    MCA_DCB_TC_CONG_EVT,        /* Transport Channel congestion status.*/
+    MCA_DCB_TC_DATA_EVT         /* This event is sent when a data packet is received from the peer.*/
+};
+
+
+
+
+/* "states" used in transport channel table */
+#define MCA_TC_ST_UNUSED   0       /* Unused - unallocated */
+#define MCA_TC_ST_IDLE     1       /* No connection */
+#define MCA_TC_ST_ACP      2       /* Waiting to accept a connection */
+#define MCA_TC_ST_INT      3       /* Initiating a connection */
+#define MCA_TC_ST_CONN     4       /* Waiting for connection confirm */
+#define MCA_TC_ST_CFG      5       /* Waiting for configuration complete */
+#define MCA_TC_ST_OPEN     6       /* Channel opened */
+#define MCA_TC_ST_SEC_INT  7       /* Security process as INT */
+#define MCA_TC_ST_SEC_ACP  8       /* Security process as ACP */
+
+/* Configuration flags. tMCA_TC_TBL.cfg_flags */
+#define MCA_L2C_CFG_IND_DONE   (1<<0)
+#define MCA_L2C_CFG_CFM_DONE   (1<<1)
+#define MCA_L2C_CFG_CONN_INT   (1<<2)
+#define MCA_L2C_CFG_CONN_ACP   (1<<3)
+#define MCA_L2C_CFG_DISCN_INT  (1<<4)
+#define MCA_L2C_CFG_DISCN_ACP  (1<<5)
+
+
+#define MCA_CTRL_TCID       0   /* to identify control channel by tMCA_TC_TBL.tcid */
+
+/* transport channel table */
+typedef struct {
+    UINT16  peer_mtu;       /* L2CAP mtu of the peer device */
+    UINT16  my_mtu;         /* Our MTU for this channel */
+    UINT16  lcid;           /* L2CAP LCID */
+    UINT8   tcid;           /* transport channel id (0, for control channel. (MDEP ID + 1) for data channel) */
+    tMCA_DL cb_idx;         /* 1-based index to ccb or dcb */
+    UINT8   state;          /* transport channel state */
+    UINT8   cfg_flags;      /* L2CAP configuration flags */
+    UINT8   id;             /* L2CAP id sent by peer device (need this to handle security pending) */
+} tMCA_TC_TBL;
+
+/* transport control block */
+typedef struct {
+    tMCA_TC_TBL     tc_tbl[MCA_NUM_TC_TBL];
+    UINT8           lcid_tbl[MAX_L2CAP_CHANNELS];   /* map LCID to tc_tbl index */
+} tMCA_TC;
+
+/* registration control block */
+typedef struct {
+    tMCA_REG        reg;                /* the parameter at register */
+    tMCA_CS         dep[MCA_NUM_DEPS];  /* the registration info for each MDEP */
+    tMCA_CTRL_CBACK *p_cback;           /* control callback function */
+} tMCA_RCB;
+
+enum
+{
+    MCA_CCB_STAT_NORM,      /* normal operation (based on ccb state) */
+    MCA_CCB_STAT_PENDING,   /* waiting for data channel  */
+    MCA_CCB_STAT_RECONN,    /* reinitiate connection after transitioning from CLOSING to IDLE state  */
+    MCA_CCB_STAT_DISC       /* MCA_DisconnectReq or MCA_Deregister is called. waiting for all associated CL and DL to detach */
+};
+typedef UINT8 tMCA_CCB_STAT;
+
+/* control channel control block */
+/* the ccbs association with the rcbs
+ * ccb[0]              ...ccb[MCA_NUM_LINKS*1-1] -> rcb[0]
+ * ccb[MCA_NUM_LINKS*1]...ccb[MCA_NUM_LINKS*2-1] -> rcb[1]
+ * ccb[MCA_NUM_LINKS*2]...ccb[MCA_NUM_LINKS*3-1] -> rcb[2]
+ */
+typedef struct {
+    tMCA_RCB        *p_rcb;             /* the associated registration control block */
+    TIMER_LIST_ENT  timer_entry;        /* CCB timer list entry */
+    tMCA_CCB_MSG    *p_tx_req;          /* Current request being sent/awaiting response */
+    tMCA_CCB_MSG    *p_rx_msg;          /* Current message received/being processed */
+    BD_ADDR         peer_addr;          /* BD address of peer */
+    UINT16          sec_mask;           /* Security mask for connections as initiator */
+    UINT16          ctrl_vpsm;          /* The virtual PSM that peer is listening for control channel */
+    UINT16          data_vpsm;          /* The virtual PSM that peer is listening for data channel. */
+    UINT16          lcid;               /* L2CAP lcid for this control channel */
+    UINT8           state;              /* The CCB state machine state */
+    BOOLEAN         cong;               /* Whether control channel is congested */
+    tMCA_CCB_STAT   status;             /* see tMCA_CCB_STAT */
+} tMCA_CCB;
+typedef void (*tMCA_CCB_ACTION)(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+
+enum
+{
+    MCA_DCB_STAT_NORM,      /* normal operation (based on dcb state) */
+    MCA_DCB_STAT_DEL,       /* MCA_Delete is called. waiting for the DL to detach */
+    MCA_DCB_STAT_DISC       /* MCA_CloseReq is called. waiting for the DL to detach */
+};
+typedef UINT8 tMCA_DCB_STAT;
+
+/* data channel control block */
+/* the dcbs association with the ccbs
+ * dcb[0]             ...dcb[MCA_NUM_MDLS*1-1] -> ccb[0]
+ * dcb[MCA_NUM_MDLS*1]...dcb[MCA_NUM_MDLS*2-1] -> ccb[1]
+ * dcb[MCA_NUM_MDLS*2]...dcb[MCA_NUM_MDLS*3-1] -> ccb[2]
+ *
+ * the dcbs association with the rcbs
+ * dcb[0]                             ...dcb[MCA_NUM_MDLS*1*MCA_NUM_LINKS*1-1] -> rcb[0]
+ * dcb[MCA_NUM_MDLS*1*MCA_NUM_LINKS*1]...dcb[MCA_NUM_MDLS*2*MCA_NUM_LINKS*2-1] -> rcb[1]
+ * dcb[MCA_NUM_MDLS*2*MCA_NUM_LINKS*2]...dcb[MCA_NUM_MDLS*3*MCA_NUM_LINKS*3-1] -> rcb[2]
+ */
+typedef struct {
+    tMCA_CCB            *p_ccb;         /* the associated control control block */
+    BT_HDR              *p_data;        /* data packet held due to L2CAP channel congestion */
+    tMCA_CS             *p_cs;          /* the associated MDEP info. p_cs->type is the mdep id(internal use) */
+    const tMCA_CHNL_CFG *p_chnl_cfg;    /* cfg params for L2CAP channel */
+    UINT16              mdl_id;         /* the MDL ID for this data channel */
+    UINT16              lcid;           /* L2CAP lcid */
+    UINT8               state;          /* The DCB state machine state */
+    BOOLEAN             cong;           /* Whether data channel is congested */
+    tMCA_DCB_STAT       status;         /* see tMCA_DCB_STAT */
+} tMCA_DCB;
+
+typedef void (*tMCA_DCB_ACTION)(tMCA_DCB *p_ccb, tMCA_DCB_EVT *p_data);
+
+/* Control block for MCA */
+typedef struct {
+    tMCA_RCB        rcb[MCA_NUM_REGS];  /* registration control block */
+    tMCA_CCB        ccb[MCA_NUM_CCBS];  /* control channel control blocks */
+    tMCA_DCB        dcb[MCA_NUM_DCBS];  /* data channel control blocks */
+    tMCA_TC         tc;                 /* transport control block */
+    UINT8           trace_level;        /* trace level */
+} tMCA_CB;
+
+/* csm functions */
+extern void mca_ccb_event(tMCA_CCB *p_ccb, UINT8 event, tMCA_CCB_EVT *p_data);
+extern tMCA_CCB *mca_ccb_by_bd(tMCA_HANDLE handle, BD_ADDR bd_addr);
+extern tMCA_CCB *mca_ccb_alloc(tMCA_HANDLE handle, BD_ADDR bd_addr);
+extern void mca_ccb_rsp_tout(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_dealloc(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern tMCA_CL mca_ccb_to_hdl(tMCA_CCB *p_ccb);
+extern tMCA_CCB *mca_ccb_by_hdl(tMCA_CL mcl);
+extern BOOLEAN mca_ccb_uses_mdl_id(tMCA_CCB *p_ccb, UINT16 mdl_id);
+
+/* cact functions */
+extern void mca_ccb_report_event(tMCA_CCB *p_ccb, UINT8 event, tMCA_CTRL *p_data);
+extern void mca_ccb_free_msg(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_snd_req(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_snd_rsp(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_do_disconn (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_cong(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_hdl_req(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_hdl_rsp(tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_ll_open (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+extern void mca_ccb_dl_open (tMCA_CCB *p_ccb, tMCA_CCB_EVT *p_data);
+
+/* dsm functions */
+extern void mca_dcb_event(tMCA_DCB *p_dcb, UINT8 event, tMCA_DCB_EVT *p_data);
+extern tMCA_DCB *mca_dcb_alloc(tMCA_CCB*p_ccb, tMCA_DEP dep);
+extern UINT8 mca_dep_free_mdl(tMCA_CCB*p_ccb, tMCA_DEP dep);
+extern void mca_dcb_dealloc(tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern tMCA_DL mca_dcb_to_hdl(tMCA_DCB *p_dcb);
+extern tMCA_DCB *mca_dcb_by_hdl(tMCA_DL hdl);
+extern void mca_dcb_close_by_mdl_id(tMCA_CCB*p_ccb, UINT16 mdl_id);
+
+/* dact functions */
+extern void mca_dcb_tc_open (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern void mca_dcb_cong (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern void mca_dcb_free_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern void mca_dcb_do_disconn (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern void mca_dcb_snd_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+extern void mca_dcb_hdl_data (tMCA_DCB *p_dcb, tMCA_DCB_EVT *p_data);
+
+
+/* main/utils functions */
+extern tMCA_HANDLE mca_handle_by_cpsm(UINT16 psm);
+extern tMCA_HANDLE mca_handle_by_dpsm(UINT16 psm);
+extern tMCA_TC_TBL * mca_tc_tbl_calloc(tMCA_CCB *p_ccb);
+extern tMCA_TC_TBL * mca_tc_tbl_dalloc(tMCA_DCB *p_dcb);
+extern tMCA_TC_TBL * mca_tc_tbl_by_lcid(UINT16 lcid);
+extern void mca_free_tc_tbl_by_lcid(UINT16 lcid);
+extern void mca_set_cfg_by_tbl(tL2CAP_CFG_INFO *p_cfg, tMCA_TC_TBL *p_tbl);
+extern void mca_tc_close_ind(tMCA_TC_TBL *p_tbl, UINT16 reason);
+extern void mca_tc_open_ind(tMCA_TC_TBL *p_tbl);
+extern void mca_tc_cong_ind(tMCA_TC_TBL *p_tbl, BOOLEAN is_congested);
+extern void mca_tc_data_ind(tMCA_TC_TBL *p_tbl, BT_HDR *p_buf);
+extern tMCA_RCB * mca_rcb_alloc(tMCA_REG *p_reg);
+extern void mca_rcb_dealloc(tMCA_HANDLE handle);
+extern tMCA_HANDLE mca_rcb_to_handle(tMCA_RCB *p_rcb);
+extern tMCA_RCB *mca_rcb_by_handle(tMCA_HANDLE handle);
+extern BOOLEAN mca_is_valid_dep_id(tMCA_RCB *p_rcb, tMCA_DEP dep);
+extern void mca_free_buf(void **p_buf);
+extern void mca_process_timeout(TIMER_LIST_ENT *p_tle);
+extern void mca_stop_timer(tMCA_CCB *p_ccb);
+
+/* l2c functions */
+extern void mca_l2c_cconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+extern void mca_l2c_dconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+extern UINT16 mca_l2c_open_req(BD_ADDR bd_addr, UINT16 PSM, const tMCA_CHNL_CFG *p_chnl_cfg);
+
+/*****************************************************************************
+** global data
+*****************************************************************************/
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/******************************************************************************
+** Main Control Block
+*******************************************************************************/
+#if MCA_DYNAMIC_MEMORY == FALSE
+MCA_API extern tMCA_CB  mca_cb;
+#else
+MCA_API extern tMCA_CB *mca_cb_ptr;
+#define mca_cb (*mca_cb_ptr)
+#endif
+
+/* L2CAP callback registration structure */
+extern const tL2CAP_APPL_INFO mca_l2c_int_appl;
+extern const tL2CAP_FCR_OPTS mca_l2c_fcr_opts_def;
+extern const UINT8 mca_std_msg_len[];
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MCA_INT_H */
diff --git a/stack/mcap/mca_l2c.c b/stack/mcap/mca_l2c.c
new file mode 100644
index 0000000..f8a48bf
--- /dev/null
+++ b/stack/mcap/mca_l2c.c
@@ -0,0 +1,589 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP at L2CAP Interface.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+
+/* callback function declarations */
+void mca_l2c_cconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+void mca_l2c_dconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+void mca_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result);
+void mca_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void mca_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+void mca_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed);
+void mca_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result);
+void mca_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested);
+void mca_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf);
+
+/* L2CAP callback function structure */
+const tL2CAP_APPL_INFO mca_l2c_int_appl = {
+    NULL,
+    mca_l2c_connect_cfm_cback,
+    NULL,
+    mca_l2c_config_ind_cback,
+    mca_l2c_config_cfm_cback,
+    mca_l2c_disconnect_ind_cback,
+    mca_l2c_disconnect_cfm_cback,
+    NULL,
+    mca_l2c_data_ind_cback,
+    mca_l2c_congestion_ind_cback
+};
+
+/* Control channel eL2CAP default options */
+const tL2CAP_FCR_OPTS mca_l2c_fcr_opts_def = {
+    L2CAP_FCR_ERTM_MODE,            /* Mandatory for MCAP */
+    MCA_FCR_OPT_TX_WINDOW_SIZE,     /* Tx window size */
+    MCA_FCR_OPT_MAX_TX_B4_DISCNT,   /* Maximum transmissions before disconnecting */
+    MCA_FCR_OPT_RETX_TOUT,          /* Retransmission timeout (2 secs) */
+    MCA_FCR_OPT_MONITOR_TOUT,       /* Monitor timeout (12 secs) */
+    MCA_FCR_OPT_MPS_SIZE            /* MPS segment size */
+};
+
+
+/*******************************************************************************
+**
+** Function         mca_sec_check_complete_term
+**
+** Description      The function called when Security Manager finishes
+**                  verification of the service side connection
+**
+** Returns          void
+**
+*******************************************************************************/
+static void mca_sec_check_complete_term (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tMCA_TC_TBL     *p_tbl = (tMCA_TC_TBL *)p_ref_data;
+    tL2CAP_CFG_INFO cfg;
+    tL2CAP_ERTM_INFO ertm_info;
+
+    MCA_TRACE_DEBUG1("mca_sec_check_complete_term res: %d", res);
+
+    if ( res == BTM_SUCCESS )
+    {
+        MCA_TRACE_DEBUG2 ("lcid:x%x id:x%x", p_tbl->lcid, p_tbl->id);
+        /* Set the FCR options: control channel mandates ERTM */
+        ertm_info.preferred_mode    = mca_l2c_fcr_opts_def.mode;
+        ertm_info.allowed_modes     = L2CAP_FCR_CHAN_OPT_ERTM;
+        ertm_info.user_rx_pool_id   = MCA_USER_RX_POOL_ID;
+        ertm_info.user_tx_pool_id   = MCA_USER_TX_POOL_ID;
+        ertm_info.fcr_rx_pool_id    = MCA_FCR_RX_POOL_ID;
+        ertm_info.fcr_tx_pool_id    = MCA_FCR_TX_POOL_ID;
+        /* Send response to the L2CAP layer. */
+        L2CA_ErtmConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_OK, L2CAP_CONN_OK, &ertm_info);
+
+        /* transition to configuration state */
+        p_tbl->state = MCA_TC_ST_CFG;
+
+        /* Send L2CAP config req */
+        mca_set_cfg_by_tbl (&cfg, p_tbl);
+        L2CA_ConfigReq(p_tbl->lcid, &cfg);
+    }
+    else
+    {
+        L2CA_ConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK);
+        mca_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_sec_check_complete_orig
+**
+** Description      The function called when Security Manager finishes
+**                  verification of the service side connection
+**
+** Returns          void
+**
+*******************************************************************************/
+static void mca_sec_check_complete_orig (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tMCA_TC_TBL     *p_tbl = (tMCA_TC_TBL *)p_ref_data;
+    tL2CAP_CFG_INFO cfg;
+
+    MCA_TRACE_DEBUG1("mca_sec_check_complete_orig res: %d", res);
+
+    if ( res == BTM_SUCCESS )
+    {
+        /* set channel state */
+        p_tbl->state = MCA_TC_ST_CFG;
+
+        /* Send L2CAP config req */
+        mca_set_cfg_by_tbl (&cfg, p_tbl);
+        L2CA_ConfigReq(p_tbl->lcid, &cfg);
+    }
+    else
+    {
+        L2CA_DisconnectReq (p_tbl->lcid);
+        mca_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
+    }
+}
+/*******************************************************************************
+**
+** Function         mca_l2c_cconn_ind_cback
+**
+** Description      This is the L2CAP connect indication callback function.
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_cconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    tMCA_HANDLE handle = mca_handle_by_cpsm(psm);
+    tMCA_CCB    *p_ccb;
+    tMCA_TC_TBL *p_tbl = NULL;
+    UINT16      result = L2CAP_CONN_NO_RESOURCES;
+    tBTM_STATUS rc;
+    tL2CAP_ERTM_INFO ertm_info, *p_ertm_info = NULL;
+    tL2CAP_CFG_INFO  cfg;
+
+    MCA_TRACE_EVENT3 ("mca_l2c_cconn_ind_cback: lcid:x%x psm:x%x id:x%x", lcid, psm, id);
+
+    /* do we already have a control channel for this peer? */
+    if ((p_ccb = mca_ccb_by_bd(handle, bd_addr)) == NULL)
+    {
+        /* no, allocate ccb */
+        if ((p_ccb = mca_ccb_alloc(handle, bd_addr)) != NULL)
+        {
+            /* allocate and set up entry */
+            p_ccb->lcid     = lcid;
+            p_tbl           = mca_tc_tbl_calloc(p_ccb);
+            p_tbl->id       = id;
+            p_tbl->cfg_flags= MCA_L2C_CFG_CONN_ACP;
+            /* proceed with connection */
+            /* Check the security */
+            rc = btm_sec_mx_access_request (bd_addr, psm, FALSE, BTM_SEC_PROTO_MCA, 0,
+                                            &mca_sec_check_complete_term, p_tbl);
+            if (rc == BTM_CMD_STARTED)
+            {
+                /* Set the FCR options: control channel mandates ERTM */
+                ertm_info.preferred_mode    = mca_l2c_fcr_opts_def.mode;
+                ertm_info.allowed_modes     = L2CAP_FCR_CHAN_OPT_ERTM;
+                ertm_info.user_rx_pool_id   = MCA_USER_RX_POOL_ID;
+                ertm_info.user_tx_pool_id   = MCA_USER_TX_POOL_ID;
+                ertm_info.fcr_rx_pool_id    = MCA_FCR_RX_POOL_ID;
+                ertm_info.fcr_tx_pool_id    = MCA_FCR_TX_POOL_ID;
+                p_ertm_info = &ertm_info;
+                result = L2CAP_CONN_PENDING;
+            }
+            else
+                result = L2CAP_CONN_OK;
+        }
+
+        /*  deal with simultaneous control channel connect case */
+    }
+    /* else reject their connection */
+
+    if (!p_tbl || (p_tbl->state != MCA_TC_ST_CFG))
+    {
+        /* Send L2CAP connect rsp */
+        L2CA_ErtmConnectRsp (bd_addr, id, lcid, result, L2CAP_CONN_OK, p_ertm_info);
+
+        /* if result ok, proceed with connection and send L2CAP
+           config req */
+        if (result == L2CAP_CONN_OK)
+        {
+            /* set channel state */
+            p_tbl->state = MCA_TC_ST_CFG;
+
+            /* Send L2CAP config req */
+            mca_set_cfg_by_tbl (&cfg, p_tbl);
+            L2CA_ConfigReq(p_tbl->lcid, &cfg);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_dconn_ind_cback
+**
+** Description      This is the L2CAP connect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_dconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    tMCA_HANDLE handle = mca_handle_by_dpsm(psm);
+    tMCA_CCB    *p_ccb;
+    tMCA_DCB       *p_dcb;
+    tMCA_TC_TBL    *p_tbl = NULL;
+    UINT16          result;
+    tL2CAP_CFG_INFO cfg;
+    tL2CAP_ERTM_INFO *p_ertm_info = NULL, ertm_info;
+    const tMCA_CHNL_CFG   *p_chnl_cfg;
+
+    MCA_TRACE_EVENT2 ("mca_l2c_dconn_ind_cback: lcid:x%x psm:x%x ", lcid, psm);
+
+    if (((p_ccb = mca_ccb_by_bd(handle, bd_addr)) != NULL) && /* find the CCB */
+        (p_ccb->status == MCA_CCB_STAT_PENDING) &&  /* this CCB is expecting a MDL */
+        (p_ccb->p_tx_req && (p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) != NULL))
+    {
+        /* found the associated dcb in listening mode */
+        /* proceed with connection */
+        p_dcb->lcid     = lcid;
+        p_tbl           = mca_tc_tbl_dalloc(p_dcb);
+        p_tbl->id       = id;
+        p_tbl->cfg_flags= MCA_L2C_CFG_CONN_ACP;
+        p_chnl_cfg = p_dcb->p_chnl_cfg;
+        /* assume that control channel has verified the security requirement */
+        /* Set the FCR options: control channel mandates ERTM */
+        ertm_info.preferred_mode    = p_chnl_cfg->fcr_opt.mode;
+        ertm_info.allowed_modes     = (1 << p_chnl_cfg->fcr_opt.mode);
+        ertm_info.user_rx_pool_id   = p_chnl_cfg->user_rx_pool_id;
+        ertm_info.user_tx_pool_id   = p_chnl_cfg->user_tx_pool_id;
+        ertm_info.fcr_rx_pool_id    = p_chnl_cfg->fcr_rx_pool_id;
+        ertm_info.fcr_tx_pool_id    = p_chnl_cfg->fcr_tx_pool_id;
+        p_ertm_info = &ertm_info;
+        result = L2CAP_CONN_OK;
+    }
+    else
+    {
+        /* else we're not listening for traffic channel; reject
+         * (this error code is specified by MCAP spec) */
+        result = L2CAP_CONN_NO_RESOURCES;
+    }
+
+    /* Send L2CAP connect rsp */
+    L2CA_ErtmConnectRsp (bd_addr, id, lcid, result, result, p_ertm_info);
+
+    /* if result ok, proceed with connection */
+    if (result == L2CAP_CONN_OK)
+    {
+        /* transition to configuration state */
+        p_tbl->state = MCA_TC_ST_CFG;
+
+        /* Send L2CAP config req */
+        mca_set_cfg_by_tbl (&cfg, p_tbl);
+        L2CA_ConfigReq(lcid, &cfg);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_connect_cfm_cback
+**
+** Description      This is the L2CAP connect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tMCA_TC_TBL    *p_tbl;
+    tL2CAP_CFG_INFO cfg;
+    tMCA_CCB *p_ccb;
+
+    MCA_TRACE_DEBUG2("mca_l2c_connect_cfm_cback lcid: x%x, result: %d",
+                     lcid, result);
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        MCA_TRACE_DEBUG2("p_tbl state: %d, tcid: %d", p_tbl->state, p_tbl->tcid);
+        /* if in correct state */
+        if (p_tbl->state == MCA_TC_ST_CONN)
+        {
+            /* if result successful */
+            if (result == L2CAP_CONN_OK)
+            {
+                if (p_tbl->tcid != 0)
+                {
+                    /* set channel state */
+                    p_tbl->state = MCA_TC_ST_CFG;
+
+                    /* Send L2CAP config req */
+                    mca_set_cfg_by_tbl (&cfg, p_tbl);
+                    L2CA_ConfigReq(lcid, &cfg);
+                }
+                else
+                {
+                    p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
+                    if (p_ccb == NULL)
+                    {
+                        result = L2CAP_CONN_NO_RESOURCES;
+                    }
+                    else
+                    {
+                        /* set channel state */
+                        p_tbl->state    = MCA_TC_ST_SEC_INT;
+                        p_tbl->lcid     = lcid;
+                        p_tbl->cfg_flags= MCA_L2C_CFG_CONN_INT;
+
+                        /* Check the security */
+                        btm_sec_mx_access_request (p_ccb->peer_addr, p_ccb->ctrl_vpsm,
+                                                   TRUE, BTM_SEC_PROTO_MCA,
+                                                   p_tbl->tcid,
+                                                   &mca_sec_check_complete_orig, p_tbl);
+                    }
+                }
+            }
+
+            /* failure; notify adaption that channel closed */
+            if (result != L2CAP_CONN_OK)
+            {
+                p_tbl->cfg_flags |= MCA_L2C_CFG_DISCN_INT;
+                mca_tc_close_ind(p_tbl, result);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_config_cfm_cback
+**
+** Description      This is the L2CAP config confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tMCA_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        /* if in correct state */
+        if (p_tbl->state == MCA_TC_ST_CFG)
+        {
+            /* if result successful */
+            if (p_cfg->result == L2CAP_CONN_OK)
+            {
+                /* update cfg_flags */
+                p_tbl->cfg_flags |= MCA_L2C_CFG_CFM_DONE;
+
+                /* if configuration complete */
+                if (p_tbl->cfg_flags & MCA_L2C_CFG_IND_DONE)
+                {
+                    mca_tc_open_ind(p_tbl);
+                }
+            }
+            /* else failure */
+            else
+            {
+                /* Send L2CAP disconnect req */
+                L2CA_DisconnectReq(lcid);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_config_ind_cback
+**
+** Description      This is the L2CAP config indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tMCA_TC_TBL    *p_tbl;
+    UINT16          result = L2CAP_CFG_OK;
+
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        /* store the mtu in tbl */
+        if (p_cfg->mtu_present)
+        {
+            p_tbl->peer_mtu = p_cfg->mtu;
+            if (p_tbl->peer_mtu < MCA_MIN_MTU)
+            {
+                result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+            }
+        }
+        else
+        {
+            p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+        }
+        MCA_TRACE_DEBUG3("peer_mtu: %d, lcid: x%x mtu_present:%d",p_tbl->peer_mtu, lcid, p_cfg->mtu_present);
+
+        /* send L2CAP configure response */
+        memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+        p_cfg->result = result;
+        L2CA_ConfigRsp(lcid, p_cfg);
+
+        /* if first config ind */
+        if ((p_tbl->cfg_flags & MCA_L2C_CFG_IND_DONE) == 0)
+        {
+            /* update cfg_flags */
+            p_tbl->cfg_flags |= MCA_L2C_CFG_IND_DONE;
+
+            /* if configuration complete */
+            if (p_tbl->cfg_flags & MCA_L2C_CFG_CFM_DONE)
+            {
+                mca_tc_open_ind(p_tbl);
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_disconnect_ind_cback
+**
+** Description      This is the L2CAP disconnect indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed)
+{
+    tMCA_TC_TBL    *p_tbl;
+    UINT16         reason = L2CAP_DISC_TIMEOUT;
+
+    MCA_TRACE_DEBUG2("mca_l2c_disconnect_ind_cback lcid: %d, ack_needed: %d",
+                     lcid, ack_needed);
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        if (ack_needed)
+        {
+            /* send L2CAP disconnect response */
+            L2CA_DisconnectRsp(lcid);
+        }
+
+        p_tbl->cfg_flags = MCA_L2C_CFG_DISCN_ACP;
+        if (ack_needed)
+            reason = L2CAP_DISC_OK;
+        mca_tc_close_ind(p_tbl, reason);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_disconnect_cfm_cback
+**
+** Description      This is the L2CAP disconnect confirm callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result)
+{
+    tMCA_TC_TBL    *p_tbl;
+
+    MCA_TRACE_DEBUG2("mca_l2c_disconnect_cfm_cback lcid: x%x, result: %d",
+                     lcid, result);
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        p_tbl->cfg_flags = MCA_L2C_CFG_DISCN_INT;
+        mca_tc_close_ind(p_tbl, result);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_l2c_congestion_ind_cback
+**
+** Description      This is the L2CAP congestion indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested)
+{
+    tMCA_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        mca_tc_cong_ind(p_tbl, is_congested);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_l2c_data_ind_cback
+**
+** Description      This is the L2CAP data indication callback function.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf)
+{
+    tMCA_TC_TBL    *p_tbl;
+
+    /* look up info for this channel */
+    if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
+    {
+        mca_tc_data_ind(p_tbl, p_buf);
+    }
+    else /* prevent buffer leak */
+        GKI_freebuf(p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_l2c_open_req
+**
+** Description      This function calls L2CA_ConnectReq() to initiate a L2CAP channel.
+**
+** Returns          void.
+**
+*******************************************************************************/
+UINT16 mca_l2c_open_req(BD_ADDR bd_addr, UINT16 psm, const tMCA_CHNL_CFG *p_chnl_cfg)
+{
+    tL2CAP_ERTM_INFO ertm_info;
+
+    if (p_chnl_cfg)
+    {
+        ertm_info.preferred_mode    = p_chnl_cfg->fcr_opt.mode;
+        ertm_info.allowed_modes     = (1 << p_chnl_cfg->fcr_opt.mode);
+        ertm_info.user_rx_pool_id   = p_chnl_cfg->user_rx_pool_id;
+        ertm_info.user_tx_pool_id   = p_chnl_cfg->user_tx_pool_id;
+        ertm_info.fcr_rx_pool_id    = p_chnl_cfg->fcr_rx_pool_id;
+        ertm_info.fcr_tx_pool_id    = p_chnl_cfg->fcr_tx_pool_id;
+    }
+    else
+    {
+        ertm_info.preferred_mode    = mca_l2c_fcr_opts_def.mode;
+        ertm_info.allowed_modes     = L2CAP_FCR_CHAN_OPT_ERTM;
+        ertm_info.user_rx_pool_id   = MCA_USER_RX_POOL_ID;
+        ertm_info.user_tx_pool_id   = MCA_USER_TX_POOL_ID;
+        ertm_info.fcr_rx_pool_id    = MCA_FCR_RX_POOL_ID;
+        ertm_info.fcr_tx_pool_id    = MCA_FCR_TX_POOL_ID;
+    }
+    return L2CA_ErtmConnectReq (psm, bd_addr, &ertm_info);
+}
+
diff --git a/stack/mcap/mca_main.c b/stack/mcap/mca_main.c
new file mode 100644
index 0000000..2e05d5e
--- /dev/null
+++ b/stack/mcap/mca_main.c
@@ -0,0 +1,643 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This is the implementation file for the MCAP Main Control Block and
+ *  Utility functions.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "mca_api.h"
+#include "mca_defs.h"
+#include "mca_int.h"
+#include "wcassert.h"
+#include "l2c_api.h"
+
+/* Main Control block for MCA */
+#if MCA_DYNAMIC_MEMORY == FALSE
+tMCA_CB mca_cb;
+#endif
+
+/*****************************************************************************
+** constants
+*****************************************************************************/
+
+/* table of standard opcode message size */
+const UINT8 mca_std_msg_len[MCA_NUM_STANDARD_OPCODE] = {
+    4,          /* MCA_OP_ERROR_RSP         */
+    5,          /* MCA_OP_MDL_CREATE_REQ    */
+    5,          /* MCA_OP_MDL_CREATE_RSP    */
+    3,          /* MCA_OP_MDL_RECONNECT_REQ */
+    4,          /* MCA_OP_MDL_RECONNECT_RSP */
+    3,          /* MCA_OP_MDL_ABORT_REQ     */
+    4,          /* MCA_OP_MDL_ABORT_RSP     */
+    3,          /* MCA_OP_MDL_DELETE_REQ    */
+    4           /* MCA_OP_MDL_DELETE_RSP    */
+};
+
+
+/*******************************************************************************
+**
+** Function         mca_handle_by_cpsm
+**
+** Description      This function returns the handle for the given control
+**                  channel PSM. 0, if not found.
+**
+** Returns          the MCA handle.
+**
+*******************************************************************************/
+tMCA_HANDLE mca_handle_by_cpsm(UINT16 psm)
+{
+    int     i;
+    tMCA_HANDLE handle = 0;
+    tMCA_RCB *p_rcb = &mca_cb.rcb[0];
+
+    for (i=0; i<MCA_NUM_REGS; i++, p_rcb++)
+    {
+        if (p_rcb->p_cback && p_rcb->reg.ctrl_psm == psm)
+        {
+            handle = i+1;
+            break;
+        }
+    }
+    return handle;
+}
+
+/*******************************************************************************
+**
+** Function         mca_handle_by_dpsm
+**
+** Description      This function returns the handle for the given data
+**                  channel PSM. 0, if not found.
+**
+** Returns          the MCA handle.
+**
+*******************************************************************************/
+tMCA_HANDLE mca_handle_by_dpsm(UINT16 psm)
+{
+    int     i;
+    tMCA_HANDLE handle = 0;
+    tMCA_RCB *p_rcb = &mca_cb.rcb[0];
+
+    for (i=0; i<MCA_NUM_REGS; i++, p_rcb++)
+    {
+        if (p_rcb->p_cback && p_rcb->reg.data_psm == psm)
+        {
+            handle = i+1;
+            break;
+        }
+    }
+    return handle;
+}
+
+/*******************************************************************************
+**
+** Function         mca_tc_tbl_calloc
+**
+** Description      This function allocates a transport table for the given
+**                  control channel.
+**
+** Returns          The tranport table.
+**
+*******************************************************************************/
+tMCA_TC_TBL * mca_tc_tbl_calloc(tMCA_CCB *p_ccb)
+{
+    tMCA_TC_TBL *p_tbl = mca_cb.tc.tc_tbl;
+    int             i;
+
+    /* find next free entry in tc table */
+    for (i = 0; i < MCA_NUM_TC_TBL; i++, p_tbl++)
+    {
+        if (p_tbl->state == MCA_TC_ST_UNUSED)
+        {
+            break;
+        }
+    }
+
+    /* sanity check */
+    WC_ASSERT(i != MCA_NUM_TC_TBL);
+
+    /* initialize entry */
+    p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+    p_tbl->cfg_flags= 0;
+    p_tbl->cb_idx   = mca_ccb_to_hdl(p_ccb);
+    p_tbl->tcid     = MCA_CTRL_TCID;
+    p_tbl->my_mtu   = MCA_CTRL_MTU;
+    p_tbl->state    = MCA_TC_ST_IDLE;
+    p_tbl->lcid     = p_ccb->lcid;
+    mca_cb.tc.lcid_tbl[p_ccb->lcid - L2CAP_BASE_APPL_CID] = i;
+    MCA_TRACE_DEBUG1("mca_tc_tbl_calloc cb_idx: %d", p_tbl->cb_idx);
+
+    return p_tbl;
+}
+
+/*******************************************************************************
+**
+** Function         mca_tc_tbl_dalloc
+**
+** Description      This function allocates a transport table for the given
+**                  data channel.
+**
+** Returns          The tranport table.
+**
+*******************************************************************************/
+tMCA_TC_TBL * mca_tc_tbl_dalloc(tMCA_DCB *p_dcb)
+{
+    tMCA_TC_TBL *p_tbl = mca_cb.tc.tc_tbl;
+    int             i;
+
+    /* find next free entry in tc table */
+    for (i = 0; i < MCA_NUM_TC_TBL; i++, p_tbl++)
+    {
+        if (p_tbl->state == MCA_TC_ST_UNUSED)
+        {
+            break;
+        }
+    }
+
+    /* sanity check */
+    WC_ASSERT(i != MCA_NUM_TC_TBL);
+
+    /* initialize entry */
+    p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+    p_tbl->cfg_flags= 0;
+    p_tbl->cb_idx   = mca_dcb_to_hdl(p_dcb);
+    p_tbl->tcid     = p_dcb->p_cs->type + 1;
+    p_tbl->my_mtu   = p_dcb->p_chnl_cfg->data_mtu;
+    p_tbl->state    = MCA_TC_ST_IDLE;
+    p_tbl->lcid     = p_dcb->lcid;
+    mca_cb.tc.lcid_tbl[p_dcb->lcid - L2CAP_BASE_APPL_CID] = i;
+    MCA_TRACE_DEBUG2("mca_tc_tbl_dalloc tcid: %d, cb_idx: %d", p_tbl->tcid, p_tbl->cb_idx);
+
+    return p_tbl;
+}
+
+/*******************************************************************************
+**
+** Function         mca_tc_tbl_by_lcid
+**
+** Description      Find the transport channel table entry by LCID.
+**
+**
+** Returns          The tranport table.
+**
+*******************************************************************************/
+tMCA_TC_TBL *mca_tc_tbl_by_lcid(UINT16 lcid)
+{
+    UINT8 idx;
+
+    if (lcid)
+    {
+        idx = mca_cb.tc.lcid_tbl[lcid - L2CAP_BASE_APPL_CID];
+
+        if (idx < MCA_NUM_TC_TBL)
+        {
+            return &mca_cb.tc.tc_tbl[idx];
+        }
+    }
+    return NULL;
+}
+
+/*******************************************************************************
+**
+** Function         mca_free_tc_tbl_by_lcid
+**
+** Description      Find the  transport table entry by LCID
+**                  and free the tc_tbl
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_free_tc_tbl_by_lcid(UINT16 lcid)
+{
+    UINT8 idx;
+
+    if (lcid)
+    {
+        idx = mca_cb.tc.lcid_tbl[lcid - L2CAP_BASE_APPL_CID];
+
+        if (idx < MCA_NUM_TC_TBL)
+        {
+            mca_cb.tc.tc_tbl[idx].state = MCA_TC_ST_UNUSED;
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_set_cfg_by_tbl
+**
+** Description      Set the L2CAP configuration information
+**
+** Returns          none.
+**
+*******************************************************************************/
+void mca_set_cfg_by_tbl(tL2CAP_CFG_INFO *p_cfg, tMCA_TC_TBL *p_tbl)
+{
+    tMCA_DCB   *p_dcb;
+    const tL2CAP_FCR_OPTS *p_opt;
+    tMCA_FCS_OPT    fcs = MCA_FCS_NONE;
+
+    if (p_tbl->tcid == MCA_CTRL_TCID)
+    {
+        p_opt = &mca_l2c_fcr_opts_def;
+    }
+    else
+    {
+        p_dcb = mca_dcb_by_hdl(p_tbl->cb_idx);
+        p_opt = &p_dcb->p_chnl_cfg->fcr_opt;
+        fcs   = p_dcb->p_chnl_cfg->fcs;
+    }
+    memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
+    p_cfg->mtu_present = TRUE;
+    p_cfg->mtu = p_tbl->my_mtu;
+    p_cfg->fcr_present = TRUE;
+    memcpy(&p_cfg->fcr, p_opt, sizeof (tL2CAP_FCR_OPTS));
+    if (fcs & MCA_FCS_PRESNT_MASK)
+    {
+        p_cfg->fcs_present = TRUE;
+        p_cfg->fcs = (fcs & MCA_FCS_USE_MASK);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_tc_close_ind
+**
+** Description      This function is called by the L2CAP interface when the
+**                  L2CAP channel is closed.  It looks up the CCB or DCB for
+**                  the channel and sends it a close event.  The reason
+**                  parameter is the same value passed by the L2CAP
+**                  callback function.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void mca_tc_close_ind(tMCA_TC_TBL *p_tbl, UINT16 reason)
+{
+    tMCA_CCB   *p_ccb;
+    tMCA_DCB   *p_dcb;
+    tMCA_CLOSE  close;
+
+    close.param  = MCA_ACP;
+    close.reason = reason;
+    close.lcid   = p_tbl->lcid;
+
+    MCA_TRACE_DEBUG3("mca_tc_close_ind tcid: %d, cb_idx:%d, old: %d",
+                     p_tbl->tcid, p_tbl->cb_idx, p_tbl->state);
+
+    /* Check if the transport channel is in use */
+    if (p_tbl->state == MCA_TC_ST_UNUSED)
+        return;
+
+    /* clear mca_tc_tbl entry */
+    if (p_tbl->cfg_flags&MCA_L2C_CFG_DISCN_INT)
+        close.param = MCA_INT;
+    p_tbl->cfg_flags = 0;
+    p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
+
+    /* if control channel, notify ccb that channel close */
+    if (p_tbl->tcid == MCA_CTRL_TCID)
+    {
+        p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
+        mca_ccb_event(p_ccb, MCA_CCB_LL_CLOSE_EVT, (tMCA_CCB_EVT *)&close);
+    }
+    /* notify dcb that channel close */
+    else
+    {
+        /* look up dcb  */
+        p_dcb = mca_dcb_by_hdl(p_tbl->cb_idx);
+        if (p_dcb != NULL)
+        {
+            mca_dcb_event(p_dcb, MCA_DCB_TC_CLOSE_EVT, (tMCA_DCB_EVT *) &close);
+        }
+    }
+    p_tbl->state = MCA_TC_ST_UNUSED;
+}
+
+/*******************************************************************************
+**
+** Function         mca_tc_open_ind
+**
+** Description      This function is called by the L2CAP interface when
+**                  the L2CAP channel is opened.  It looks up the CCB or DCB
+**                  for the channel and sends it an open event.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void mca_tc_open_ind(tMCA_TC_TBL *p_tbl)
+{
+    tMCA_CCB   *p_ccb;
+    tMCA_DCB   *p_dcb;
+    tMCA_OPEN  open;
+
+    MCA_TRACE_DEBUG2("mca_tc_open_ind tcid: %d, cb_idx: %d", p_tbl->tcid, p_tbl->cb_idx);
+    p_tbl->state = MCA_TC_ST_OPEN;
+
+    open.peer_mtu = p_tbl->peer_mtu;
+    open.lcid = p_tbl->lcid;
+    /* use param to indicate the role of connection.
+     * MCA_ACP, if ACP */
+    open.param = MCA_INT;
+    if (p_tbl->cfg_flags & MCA_L2C_CFG_CONN_ACP)
+    {
+        open.param = MCA_ACP;
+    }
+
+    /* if control channel, notify ccb that channel open */
+    if (p_tbl->tcid == MCA_CTRL_TCID)
+    {
+        p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
+
+        mca_ccb_event(p_ccb, MCA_CCB_LL_OPEN_EVT, (tMCA_CCB_EVT *)&open);
+    }
+    /* must be data channel, notify dcb that channel open */
+    else
+    {
+        /* look up dcb */
+        p_dcb = mca_dcb_by_hdl(p_tbl->cb_idx);
+
+        /* put lcid in event data */
+        if (p_dcb != NULL)
+        {
+            mca_dcb_event(p_dcb, MCA_DCB_TC_OPEN_EVT, (tMCA_DCB_EVT *) &open);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_tc_cong_ind
+**
+** Description      This function is called by the L2CAP interface layer when
+**                  L2CAP calls the congestion callback.  It looks up the CCB
+**                  or DCB for the channel and sends it a congestion event.
+**                  The is_congested parameter is the same value passed by
+**                  the L2CAP callback function.
+**
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void mca_tc_cong_ind(tMCA_TC_TBL *p_tbl, BOOLEAN is_congested)
+{
+    tMCA_CCB   *p_ccb;
+    tMCA_DCB   *p_dcb;
+
+    MCA_TRACE_DEBUG2("mca_tc_cong_ind tcid: %d, cb_idx: %d", p_tbl->tcid, p_tbl->cb_idx);
+    /* if control channel, notify ccb of congestion */
+    if (p_tbl->tcid == MCA_CTRL_TCID)
+    {
+        p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
+        mca_ccb_event(p_ccb, MCA_CCB_LL_CONG_EVT, (tMCA_CCB_EVT *) &is_congested);
+    }
+    /* notify dcb that channel open */
+    else
+    {
+        /* look up dcb by cb_idx */
+        p_dcb = mca_dcb_by_hdl(p_tbl->cb_idx);
+        if (p_dcb != NULL)
+        {
+            mca_dcb_event(p_dcb, MCA_DCB_TC_CONG_EVT, (tMCA_DCB_EVT *) &is_congested);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         mca_tc_data_ind
+**
+** Description      This function is called by the L2CAP interface layer when
+**                  incoming data is received from L2CAP.  It looks up the CCB
+**                  or DCB for the channel and routes the data accordingly.
+**
+** Returns          Nothing.
+**
+*******************************************************************************/
+void mca_tc_data_ind(tMCA_TC_TBL *p_tbl, BT_HDR *p_buf)
+{
+    tMCA_CCB   *p_ccb;
+    tMCA_DCB   *p_dcb;
+    UINT8       event = MCA_CCB_MSG_RSP_EVT;
+    UINT8       *p;
+    UINT8       rej_rsp_code = MCA_RSP_SUCCESS;
+
+    MCA_TRACE_DEBUG2("mca_tc_data_ind tcid: %d, cb_idx: %d", p_tbl->tcid, p_tbl->cb_idx);
+
+
+    /* if control channel, handle control message */
+    if (p_tbl->tcid == MCA_CTRL_TCID)
+    {
+        p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
+        if (p_ccb)
+        {
+            p = (UINT8*)(p_buf+1) + p_buf->offset;
+            /* all the request opcode has bit 0 set. response code has bit 0 clear */
+            if ((*p) & 0x01)
+                event = MCA_CCB_MSG_REQ_EVT;
+
+            if (*p < MCA_NUM_STANDARD_OPCODE)
+            {
+                if (p_buf->len != mca_std_msg_len[*p])
+                {
+                    MCA_TRACE_ERROR3 ("opcode: %d required len:%d, got len:%d", *p, mca_std_msg_len[*p], p_buf->len);
+                    rej_rsp_code = MCA_RSP_BAD_PARAM;
+                }
+            }
+            else if ((*p >= MCA_FIRST_SYNC_OP) && (*p <= MCA_LAST_SYNC_OP))
+            {
+                MCA_TRACE_ERROR2 ("unsupported SYNC opcode: %d len:%d", *p, p_buf->len);
+                /* reject unsupported request */
+                rej_rsp_code = MCA_RSP_NO_SUPPORT;
+            }
+            else
+            {
+                MCA_TRACE_ERROR2 ("bad opcode: %d len:%d", *p, p_buf->len);
+                /* reject unsupported request */
+                rej_rsp_code = MCA_RSP_BAD_OPCODE;
+            }
+
+            p_buf->layer_specific = rej_rsp_code;
+            /* forward the request/response to state machine */
+            mca_ccb_event(p_ccb, event, (tMCA_CCB_EVT *) p_buf);
+        } /* got a valid ccb */
+        else
+            GKI_freebuf(p_buf);
+    }
+    /* else send event to dcb */
+    else
+    {
+        p_dcb = mca_dcb_by_hdl(p_tbl->cb_idx);
+        if (p_dcb != NULL)
+        {
+            mca_dcb_event(p_dcb, MCA_DCB_TC_DATA_EVT, (tMCA_DCB_EVT *) p_buf);
+        }
+        else
+            GKI_freebuf(p_buf);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_rcb_alloc
+**
+** Description      This function allocates a registration control block.
+**                  If no free RCB is available, it returns NULL.
+**
+** Returns          tMCA_RCB *
+**
+*******************************************************************************/
+tMCA_RCB * mca_rcb_alloc(tMCA_REG *p_reg)
+{
+    int     i;
+    tMCA_RCB *p_rcb = NULL;
+
+    for (i=0; i<MCA_NUM_REGS; i++)
+    {
+        if (mca_cb.rcb[i].p_cback == NULL)
+        {
+            p_rcb = &mca_cb.rcb[i];
+            memcpy (&p_rcb->reg, p_reg, sizeof(tMCA_REG));
+            break;
+        }
+    }
+    return p_rcb;
+}
+
+/*******************************************************************************
+**
+** Function         mca_rcb_dealloc
+**
+** Description      This function deallocates the RCB with the given handle.
+**
+** Returns          void.
+**
+*******************************************************************************/
+void mca_rcb_dealloc(tMCA_HANDLE handle)
+{
+    int      i;
+    BOOLEAN  done = TRUE;
+    tMCA_RCB *p_rcb;
+    tMCA_CCB *p_ccb;
+
+    if (handle && (handle<=MCA_NUM_REGS))
+    {
+        handle--;
+        p_rcb = &mca_cb.rcb[handle];
+        if (p_rcb->p_cback)
+        {
+            p_ccb = &mca_cb.ccb[handle*MCA_NUM_LINKS];
+            /* check if all associated CCB are disconnected */
+            for (i=0; i<MCA_NUM_LINKS; i++, p_ccb++)
+            {
+                if (p_ccb->p_rcb)
+                {
+                    done = FALSE;
+                    mca_ccb_event (p_ccb, MCA_CCB_API_DISCONNECT_EVT, NULL);
+                }
+            }
+
+            if (done)
+            {
+                memset (p_rcb, 0, sizeof(tMCA_RCB));
+            }
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         mca_rcb_to_handle
+**
+** Description      This function converts a pointer to an RCB to
+**                  a handle (tMCA_HANDLE).  It returns the handle.
+**
+** Returns          void.
+**
+*******************************************************************************/
+tMCA_HANDLE mca_rcb_to_handle(tMCA_RCB *p_rcb)
+{
+    return(UINT8) (p_rcb - mca_cb.rcb + 1);
+}
+
+/*******************************************************************************
+**
+** Function         mca_rcb_by_handle
+**
+** Description      This function finds the RCB for a handle (tMCA_HANDLE).
+**                  It returns a pointer to the RCB.  If no RCB matches the
+**                  handle it returns NULL.
+**
+** Returns          tMCA_RCB *
+**
+*******************************************************************************/
+tMCA_RCB *mca_rcb_by_handle(tMCA_HANDLE handle)
+{
+    tMCA_RCB *p_rcb = NULL;
+
+    if (handle && (handle<=MCA_NUM_REGS) && mca_cb.rcb[handle-1].p_cback)
+    {
+        p_rcb = &mca_cb.rcb[handle-1];
+    }
+    return p_rcb;
+}
+
+/*******************************************************************************
+**
+** Function         mca_is_valid_dep_id
+**
+** Description      This function checks if the given dep_id is valid.
+**
+** Returns          TRUE, if this is a valid local dep_id
+**
+*******************************************************************************/
+BOOLEAN mca_is_valid_dep_id(tMCA_RCB *p_rcb, tMCA_DEP dep)
+{
+    BOOLEAN valid = FALSE;
+    if (dep < MCA_NUM_DEPS && p_rcb->dep[dep].p_data_cback)
+    {
+        valid = TRUE;
+    }
+    return valid;
+}
+
+/*******************************************************************************
+**
+** Function         mca_free_buf
+**
+** Description      free memory for specified GKI packet
+**
+** Returns          void
+**
+*******************************************************************************/
+void mca_free_buf (void **p_buf)
+{
+    if (p_buf && *p_buf)
+    {
+        GKI_freebuf(*p_buf);
+        *p_buf = NULL;
+    }
+}
diff --git a/stack/pan/pan_api.c b/stack/pan/pan_api.c
new file mode 100644
index 0000000..6aa24b9
--- /dev/null
+++ b/stack/pan/pan_api.c
@@ -0,0 +1,853 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains main functions to support PAN profile
+ *  commands and events.
+ *
+ *****************************************************************************/
+
+#include <string.h>
+#include "gki.h"
+#include "bt_types.h"
+#include "bnep_api.h"
+#include "pan_api.h"
+#include "pan_int.h"
+#include "sdp_api.h"
+#include "sdpdefs.h"
+#include "l2c_api.h"
+#include "hcidefs.h"
+#include "btm_api.h"
+
+
+/*******************************************************************************
+**
+** Function         PAN_Register
+**
+** Description      This function is called by the application to register
+**                  its callbacks with PAN profile. The application then
+**                  should set the PAN role explicitly.
+**
+** Parameters:      p_register - contains all callback function pointers
+**
+**
+** Returns          none
+**
+*******************************************************************************/
+void PAN_Register (tPAN_REGISTER *p_register)
+{
+    BTM_SetDiscoverability (BTM_GENERAL_DISCOVERABLE, 0, 0);
+    BTM_SetConnectability (BTM_CONNECTABLE, 0, 0);
+
+    pan_register_with_bnep ();
+
+    if (!p_register)
+        return;
+
+    pan_cb.pan_conn_state_cb    = p_register->pan_conn_state_cb;
+    pan_cb.pan_bridge_req_cb    = p_register->pan_bridge_req_cb;
+    pan_cb.pan_data_buf_ind_cb  = p_register->pan_data_buf_ind_cb;
+    pan_cb.pan_data_ind_cb      = p_register->pan_data_ind_cb;
+    pan_cb.pan_pfilt_ind_cb     = p_register->pan_pfilt_ind_cb;
+    pan_cb.pan_mfilt_ind_cb     = p_register->pan_mfilt_ind_cb;
+    pan_cb.pan_tx_data_flow_cb  = p_register->pan_tx_data_flow_cb;
+
+    return;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         PAN_Deregister
+**
+** Description      This function is called by the application to de-register
+**                  its callbacks with PAN profile. This will make the PAN to
+**                  become inactive. This will deregister PAN services from SDP
+**                  and close all active connections
+**
+** Parameters:      none
+**
+**
+** Returns          none
+**
+*******************************************************************************/
+void PAN_Deregister (void)
+{
+    pan_cb.pan_bridge_req_cb    = NULL;
+    pan_cb.pan_data_buf_ind_cb  = NULL;
+    pan_cb.pan_data_ind_cb      = NULL;
+    pan_cb.pan_conn_state_cb    = NULL;
+    pan_cb.pan_pfilt_ind_cb     = NULL;
+    pan_cb.pan_mfilt_ind_cb     = NULL;
+
+    PAN_SetRole (PAN_ROLE_INACTIVE, NULL, NULL, NULL, NULL);
+    BNEP_Deregister ();
+
+    return;
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         PAN_SetRole
+**
+** Description      This function is called by the application to set the PAN
+**                  profile role. This should be called after PAN_Register.
+**                  This can be called any time to change the PAN role
+**
+** Parameters:      role        - is bit map of roles to be active
+**                                      PAN_ROLE_CLIENT is for PANU role
+**                                      PAN_ROLE_GN_SERVER is for GN role
+**                                      PAN_ROLE_NAP_SERVER is for NAP role
+**                  sec_mask    - Security mask for different roles
+**                                      It is array of UINT8. The byte represent the
+**                                      security for roles PANU, GN and NAP in order
+**                  p_user_name - Service name for PANU role
+**                  p_gn_name   - Service name for GN role
+**                  p_nap_name  - Service name for NAP role
+**                                      Can be NULL if user wants it to be default
+**
+** Returns          PAN_SUCCESS     - if the role is set successfully
+**                  PAN_FAILURE     - if the role is not valid
+**
+*******************************************************************************/
+tPAN_RESULT PAN_SetRole (UINT8 role,
+                         UINT8 *sec_mask,
+                         char *p_user_name,
+                         char *p_gn_name,
+                         char *p_nap_name)
+{
+    char                *p_desc;
+    UINT8               security[3] = {PAN_PANU_SECURITY_LEVEL,
+                                       PAN_GN_SECURITY_LEVEL,
+                                       PAN_NAP_SECURITY_LEVEL};
+    UINT8               *p_sec;
+
+    /* If the role is not a valid combination reject it */
+    if ((!(role & (PAN_ROLE_CLIENT | PAN_ROLE_GN_SERVER | PAN_ROLE_NAP_SERVER))) &&
+        role != PAN_ROLE_INACTIVE)
+    {
+        PAN_TRACE_ERROR1 ("PAN role %d is invalid", role);
+        return PAN_FAILURE;
+    }
+
+    /* If the current active role is same as the role being set do nothing */
+    if (pan_cb.role == role)
+    {
+        PAN_TRACE_EVENT1 ("PAN role already was set to: %d", role);
+        return PAN_SUCCESS;
+    }
+
+    if (!sec_mask)
+        p_sec = security;
+    else
+        p_sec = sec_mask;
+
+    /* Register all the roles with SDP */
+    PAN_TRACE_API1 ("PAN_SetRole() called with role 0x%x", role);
+#if (defined (PAN_SUPPORTS_ROLE_NAP) && PAN_SUPPORTS_ROLE_NAP == TRUE)
+    /* Check the service name */
+    if ((p_nap_name == NULL) || (*p_nap_name == 0))
+        p_nap_name = PAN_NAP_DEFAULT_SERVICE_NAME;
+
+    if (role & PAN_ROLE_NAP_SERVER)
+    {
+        /* Registering for NAP service with SDP */
+        p_desc = PAN_NAP_DEFAULT_DESCRIPTION;
+
+        if (pan_cb.pan_nap_sdp_handle != 0)
+            SDP_DeleteRecord (pan_cb.pan_nap_sdp_handle);
+
+        pan_cb.pan_nap_sdp_handle = pan_register_with_sdp (UUID_SERVCLASS_NAP, p_sec[2], p_nap_name, p_desc);
+// btla-specific ++
+        bta_sys_add_uuid(UUID_SERVCLASS_NAP);
+// btla-specific --
+    }
+    /* If the NAP role is already active and now being cleared delete the record */
+    else if (pan_cb.role & PAN_ROLE_NAP_SERVER)
+    {
+        if (pan_cb.pan_nap_sdp_handle != 0)
+        {
+            SDP_DeleteRecord (pan_cb.pan_nap_sdp_handle);
+            pan_cb.pan_nap_sdp_handle = 0;
+// btla-specific ++
+            bta_sys_remove_uuid(UUID_SERVCLASS_NAP);
+// btla-specific --
+        }
+    }
+#endif
+
+#if (defined (PAN_SUPPORTS_ROLE_GN) && PAN_SUPPORTS_ROLE_GN == TRUE)
+    /* Check the service name */
+    if ((p_gn_name == NULL) || (*p_gn_name == 0))
+        p_gn_name = PAN_GN_DEFAULT_SERVICE_NAME;
+
+    if (role & PAN_ROLE_GN_SERVER)
+    {
+        /* Registering for GN service with SDP */
+        p_desc = PAN_GN_DEFAULT_DESCRIPTION;
+
+        if (pan_cb.pan_gn_sdp_handle != 0)
+            SDP_DeleteRecord (pan_cb.pan_gn_sdp_handle);
+
+        pan_cb.pan_gn_sdp_handle = pan_register_with_sdp (UUID_SERVCLASS_GN, p_sec[1], p_gn_name, p_desc);
+// btla-specific ++
+        bta_sys_add_uuid(UUID_SERVCLASS_GN);
+// btla-specific --
+    }
+    /* If the GN role is already active and now being cleared delete the record */
+    else if (pan_cb.role & PAN_ROLE_GN_SERVER)
+    {
+        if (pan_cb.pan_gn_sdp_handle != 0)
+        {
+            SDP_DeleteRecord (pan_cb.pan_gn_sdp_handle);
+            pan_cb.pan_gn_sdp_handle = 0;
+// btla-specific ++
+            bta_sys_remove_uuid(UUID_SERVCLASS_GN);
+// btla-specific --
+        }
+    }
+#endif
+
+#if (defined (PAN_SUPPORTS_ROLE_PANU) && PAN_SUPPORTS_ROLE_PANU == TRUE)
+    /* Check the service name */
+    if ((p_user_name == NULL) || (*p_user_name == 0))
+        p_user_name = PAN_PANU_DEFAULT_SERVICE_NAME;
+
+    if (role & PAN_ROLE_CLIENT)
+    {
+        /* Registering for PANU service with SDP */
+        p_desc = PAN_PANU_DEFAULT_DESCRIPTION;
+        if (pan_cb.pan_user_sdp_handle != 0)
+            SDP_DeleteRecord (pan_cb.pan_user_sdp_handle);
+
+        pan_cb.pan_user_sdp_handle = pan_register_with_sdp (UUID_SERVCLASS_PANU, p_sec[0], p_user_name, p_desc);
+// btla-specific ++
+        bta_sys_add_uuid(UUID_SERVCLASS_PANU);
+// btla-specific --
+    }
+    /* If the PANU role is already active and now being cleared delete the record */
+    else if (pan_cb.role & PAN_ROLE_CLIENT)
+    {
+        if (pan_cb.pan_user_sdp_handle != 0)
+        {
+            SDP_DeleteRecord (pan_cb.pan_user_sdp_handle);
+            pan_cb.pan_user_sdp_handle = 0;
+// btla-specific ++
+            bta_sys_remove_uuid(UUID_SERVCLASS_PANU);
+// btla-specific --
+        }
+    }
+#endif
+
+    /* Check if it is a shutdown request */
+    if (role == PAN_ROLE_INACTIVE)
+        pan_close_all_connections ();
+
+    pan_cb.role = role;
+    PAN_TRACE_EVENT1 ("PAN role set to: %d", role);
+    return PAN_SUCCESS;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         PAN_Connect
+**
+** Description      This function is called by the application to initiate a
+**                  connection to the remote device
+**
+** Parameters:      rem_bda     - BD Addr of the remote device
+**                  src_role    - Role of the local device for the connection
+**                  dst_role    - Role of the remote device for the connection
+**                                      PAN_ROLE_CLIENT is for PANU role
+**                                      PAN_ROLE_GN_SERVER is for GN role
+**                                      PAN_ROLE_NAP_SERVER is for NAP role
+**                  *handle     - Pointer for returning Handle to the connection
+**
+** Returns          PAN_SUCCESS      - if the connection is initiated successfully
+**                  PAN_NO_RESOURCES - resources are not sufficent
+**                  PAN_FAILURE      - if the connection cannot be initiated
+**                                           this can be because of the combination of
+**                                           src and dst roles may not be valid or
+**                                           allowed at that point of time
+**
+*******************************************************************************/
+tPAN_RESULT PAN_Connect (BD_ADDR rem_bda, UINT8 src_role, UINT8 dst_role, UINT16 *handle)
+{
+    tPAN_CONN       *pcb;
+    tBNEP_RESULT    result;
+    tBT_UUID        src_uuid, dst_uuid;
+    UINT8           service_id;
+    UINT32 mx_chan_id;
+
+    /*
+    ** Initialize the handle so that in case of failure return values
+    ** the profile will not get confused
+    */
+    *handle = BNEP_INVALID_HANDLE;
+
+    /* Check if PAN is active or not */
+    if (!(pan_cb.role & src_role))
+    {
+        PAN_TRACE_ERROR1 ("PAN is not active for the role %d", src_role);
+        return PAN_FAILURE;
+    }
+
+    /* Validate the parameters before proceeding */
+    if ((src_role != PAN_ROLE_CLIENT && src_role != PAN_ROLE_GN_SERVER && src_role != PAN_ROLE_NAP_SERVER) ||
+        (dst_role != PAN_ROLE_CLIENT && dst_role != PAN_ROLE_GN_SERVER && dst_role != PAN_ROLE_NAP_SERVER))
+    {
+        PAN_TRACE_ERROR2 ("Either source %d or destination role %d is invalid", src_role, dst_role);
+        return PAN_FAILURE;
+    }
+
+    /* Check if connection exists for this remote device */
+    pcb = pan_get_pcb_by_addr (rem_bda);
+
+    /* If we are PANU for this role validate destination role */
+    if (src_role == PAN_ROLE_CLIENT)
+    {
+        if ((pan_cb.num_conns > 1) || (pan_cb.num_conns && (!pcb)))
+        {
+            /*
+            ** If the request is not for existing connection reject it
+            ** because if there is already a connection we cannot accept
+            ** another connection in PANU role
+            */
+            PAN_TRACE_ERROR0 ("Cannot make PANU connections when there are more than one connection");
+            return PAN_INVALID_SRC_ROLE;
+        }
+
+        src_uuid.uu.uuid16 = UUID_SERVCLASS_PANU;
+        if (dst_role == PAN_ROLE_CLIENT)
+        {
+            service_id = BTM_SEC_SERVICE_BNEP_PANU;
+            dst_uuid.uu.uuid16 = UUID_SERVCLASS_PANU;
+        }
+        else if (dst_role == PAN_ROLE_GN_SERVER)
+        {
+            service_id = BTM_SEC_SERVICE_BNEP_GN;
+            dst_uuid.uu.uuid16 = UUID_SERVCLASS_GN;
+        }
+        else
+        {
+            service_id = BTM_SEC_SERVICE_BNEP_NAP;
+            dst_uuid.uu.uuid16 = UUID_SERVCLASS_NAP;
+        }
+        mx_chan_id = dst_uuid.uu.uuid16;
+    }
+    /* If destination is PANU role validate source role */
+    else if (dst_role == PAN_ROLE_CLIENT)
+    {
+        if (pan_cb.num_conns && pan_cb.active_role == PAN_ROLE_CLIENT && !pcb)
+        {
+            PAN_TRACE_ERROR0 ("Device already have a connection in PANU role");
+            return PAN_INVALID_SRC_ROLE;
+        }
+
+        dst_uuid.uu.uuid16 = UUID_SERVCLASS_PANU;
+        if (src_role == PAN_ROLE_GN_SERVER)
+        {
+            service_id = BTM_SEC_SERVICE_BNEP_GN;
+            src_uuid.uu.uuid16 = UUID_SERVCLASS_GN;
+        }
+        else
+        {
+            service_id = BTM_SEC_SERVICE_BNEP_NAP;
+            src_uuid.uu.uuid16 = UUID_SERVCLASS_NAP;
+        }
+        mx_chan_id = src_uuid.uu.uuid16;
+    }
+    /* The role combination is not valid */
+    else
+    {
+        PAN_TRACE_ERROR2 ("Source %d and Destination roles %d are not valid combination",
+            src_role, dst_role);
+        return PAN_FAILURE;
+    }
+
+    /* Allocate control block and initiate connection */
+    if (!pcb)
+        pcb = pan_allocate_pcb (rem_bda, BNEP_INVALID_HANDLE);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR0 ("PAN Connection failed because of no resources");
+        return PAN_NO_RESOURCES;
+    }
+    BTM_SetOutService(rem_bda, BTM_SEC_SERVICE_BNEP_PANU, mx_chan_id);
+
+    PAN_TRACE_API6 ("PAN_Connect() for BD Addr %x.%x.%x.%x.%x.%x",
+        rem_bda[0], rem_bda[1], rem_bda[2], rem_bda[3], rem_bda[4], rem_bda[5]);
+    if (pcb->con_state == PAN_STATE_IDLE)
+    {
+        pan_cb.num_conns++;
+    }
+    else if (pcb->con_state == PAN_STATE_CONNECTED)
+    {
+        pcb->con_flags |= PAN_FLAGS_CONN_COMPLETED;
+    }
+    else
+        /* PAN connection is still in progress */
+        return PAN_WRONG_STATE;
+
+    pcb->con_state = PAN_STATE_CONN_START;
+    pcb->prv_src_uuid = pcb->src_uuid;
+    pcb->prv_dst_uuid = pcb->dst_uuid;
+
+    pcb->src_uuid     = src_uuid.uu.uuid16;
+    pcb->dst_uuid     = dst_uuid.uu.uuid16;
+
+    src_uuid.len      = 2;
+    dst_uuid.len      = 2;
+
+    result = BNEP_Connect (rem_bda, &src_uuid, &dst_uuid, &(pcb->handle));
+    if (result != BNEP_SUCCESS)
+    {
+        pan_release_pcb (pcb);
+        return result;
+    }
+
+    PAN_TRACE_DEBUG1 ("PAN_Connect() current active role set to %d", src_role);
+    pan_cb.prv_active_role = pan_cb.active_role;
+    pan_cb.active_role = src_role;
+    *handle = pcb->handle;
+    return PAN_SUCCESS;
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         PAN_Disconnect
+**
+** Description      This is used to disconnect the connection
+**
+** Parameters:      handle           - handle for the connection
+**
+** Returns          PAN_SUCCESS      - if the connection is closed successfully
+**                  PAN_FAILURE      - if the connection is not found or
+**                                           there is an error in disconnecting
+**
+*******************************************************************************/
+tPAN_RESULT PAN_Disconnect (UINT16 handle)
+{
+    tPAN_CONN       *pcb;
+    tBNEP_RESULT    result;
+
+    /* Check if the connection exists */
+    pcb = pan_get_pcb_by_handle (handle);
+    if(!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN connection not found for the handle %d", handle);
+        return PAN_FAILURE;
+    }
+
+    result = BNEP_Disconnect (pcb->handle);
+    if (pcb->con_state == PAN_STATE_CONNECTED)
+        pan_cb.num_conns--;
+
+    if (pan_cb.pan_bridge_req_cb && pcb->src_uuid == UUID_SERVCLASS_NAP)
+        (*pan_cb.pan_bridge_req_cb) (pcb->rem_bda, FALSE);
+
+    pan_release_pcb (pcb);
+
+    if (result != BNEP_SUCCESS)
+    {
+        PAN_TRACE_EVENT0 ("Error in closing PAN connection");
+        return PAN_FAILURE;
+    }
+
+    PAN_TRACE_EVENT0 ("PAN connection closed");
+    return PAN_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         PAN_Write
+**
+** Description      This sends data over the PAN connections. If this is called
+**                  on GN or NAP side and the packet is multicast or broadcast
+**                  it will be sent on all the links. Otherwise the correct link
+**                  is found based on the destination address and forwarded on it
+**                  If the return value is not PAN_SUCCESS the application should
+**                  take care of releasing the message buffer
+**
+** Parameters:      handle   - handle for the connection
+**                  dst      - MAC or BD Addr of the destination device
+**                  src      - MAC or BD Addr of the source who sent this packet
+**                  protocol - protocol of the ethernet packet like IP or ARP
+**                  p_data   - pointer to the data
+**                  len      - length of the data
+**                  ext      - to indicate that extension headers present
+**
+** Returns          PAN_SUCCESS       - if the data is sent successfully
+**                  PAN_FAILURE       - if the connection is not found or
+**                                           there is an error in sending data
+**
+*******************************************************************************/
+tPAN_RESULT PAN_Write (UINT16 handle, BD_ADDR dst, BD_ADDR src, UINT16 protocol, UINT8 *p_data, UINT16 len, BOOLEAN ext)
+{
+    tPAN_CONN       *pcb;
+    UINT16          i;
+    tBNEP_RESULT    result;
+
+    if (pan_cb.role == PAN_ROLE_INACTIVE || (!(pan_cb.num_conns)))
+    {
+        PAN_TRACE_ERROR0 ("PAN is not active Data write failed");
+        return PAN_FAILURE;
+    }
+
+    /* Check if it is broadcast or multicast packet */
+    if (dst[0] & 0x01)
+    {
+        for (i=0; i<MAX_PAN_CONNS; i++)
+        {
+            if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED)
+                BNEP_Write (pan_cb.pcb[i].handle, dst, p_data, len, protocol, src, ext);
+        }
+
+        return PAN_SUCCESS;
+    }
+
+    if (pan_cb.active_role == PAN_ROLE_CLIENT)
+    {
+        /* Data write is on PANU connection */
+        for (i=0; i<MAX_PAN_CONNS; i++)
+        {
+            if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
+                pan_cb.pcb[i].src_uuid == UUID_SERVCLASS_PANU)
+                break;
+        }
+
+        if (i == MAX_PAN_CONNS)
+        {
+            PAN_TRACE_ERROR0 ("PAN Don't have any user connections");
+            return PAN_FAILURE;
+        }
+
+        result = BNEP_Write (pan_cb.pcb[i].handle, dst, p_data, len, protocol, src, ext);
+        if (result == BNEP_IGNORE_CMD)
+        {
+            PAN_TRACE_DEBUG0 ("PAN ignored data for PANU connection");
+            return result;
+        }
+        else if (result != BNEP_SUCCESS)
+        {
+            PAN_TRACE_ERROR0 ("PAN failed to write data for the PANU connection");
+            return result;
+        }
+
+        PAN_TRACE_DEBUG0 ("PAN successfully wrote data for the PANU connection");
+        return PAN_SUCCESS;
+    }
+
+    pcb = pan_get_pcb_by_handle (handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR0 ("PAN Data write for wrong addr");
+        return PAN_FAILURE;
+    }
+
+    if (pcb->con_state != PAN_STATE_CONNECTED)
+    {
+        PAN_TRACE_ERROR0 ("PAN Data write when conn is not active");
+        return PAN_FAILURE;
+    }
+
+    result = BNEP_Write (pcb->handle, dst, p_data, len, protocol, src, ext);
+    if (result == BNEP_IGNORE_CMD)
+    {
+        PAN_TRACE_DEBUG0 ("PAN ignored data write to PANU");
+        return result;
+    }
+    else if (result != BNEP_SUCCESS)
+    {
+        PAN_TRACE_ERROR0 ("PAN failed to send data to the PANU");
+        return result;
+    }
+
+    PAN_TRACE_DEBUG0 ("PAN successfully sent data to the PANU");
+    return PAN_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         PAN_WriteBuf
+**
+** Description      This sends data over the PAN connections. If this is called
+**                  on GN or NAP side and the packet is multicast or broadcast
+**                  it will be sent on all the links. Otherwise the correct link
+**                  is found based on the destination address and forwarded on it
+**                  If the return value is not PAN_SUCCESS the application should
+**                  take care of releasing the message buffer
+**
+** Parameters:      handle   - handle for the connection
+**                  dst      - MAC or BD Addr of the destination device
+**                  src      - MAC or BD Addr of the source who sent this packet
+**                  protocol - protocol of the ethernet packet like IP or ARP
+**                  p_buf    - pointer to the data buffer
+**                  ext      - to indicate that extension headers present
+**
+** Returns          PAN_SUCCESS       - if the data is sent successfully
+**                  PAN_FAILURE       - if the connection is not found or
+**                                           there is an error in sending data
+**
+*******************************************************************************/
+tPAN_RESULT PAN_WriteBuf (UINT16 handle, BD_ADDR dst, BD_ADDR src, UINT16 protocol, BT_HDR *p_buf, BOOLEAN ext)
+{
+    tPAN_CONN       *pcb;
+    UINT16          i;
+    tBNEP_RESULT    result;
+
+    /* Check if it is broadcast or multicast packet */
+    if (dst[0] & 0x01)
+    {
+        UINT8       *p_data;
+        UINT16      len;
+
+        p_data  = (UINT8 *)(p_buf + 1) + p_buf->offset;
+        len     = p_buf->len;
+        PAN_Write (handle, dst, src, protocol, p_data, len, ext);
+        GKI_freebuf (p_buf);
+        return PAN_SUCCESS;
+    }
+
+    if (pan_cb.role == PAN_ROLE_INACTIVE || (!(pan_cb.num_conns)))
+    {
+        PAN_TRACE_ERROR0 ("PAN is not active Data write failed");
+        GKI_freebuf (p_buf);
+        return PAN_FAILURE;
+    }
+
+    /* Check if the data write is on PANU side */
+    if (pan_cb.active_role == PAN_ROLE_CLIENT)
+    {
+        /* Data write is on PANU connection */
+        for (i=0; i<MAX_PAN_CONNS; i++)
+        {
+            if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
+                pan_cb.pcb[i].src_uuid == UUID_SERVCLASS_PANU)
+                break;
+        }
+
+        if (i == MAX_PAN_CONNS)
+        {
+            PAN_TRACE_ERROR0 ("PAN Don't have any user connections");
+            GKI_freebuf (p_buf);
+            return PAN_FAILURE;
+        }
+
+        result = BNEP_WriteBuf (pan_cb.pcb[i].handle, dst, p_buf, protocol, src, ext);
+        if (result == BNEP_IGNORE_CMD)
+        {
+            PAN_TRACE_DEBUG0 ("PAN ignored data write for PANU connection");
+            return result;
+        }
+        else if (result != BNEP_SUCCESS)
+        {
+            PAN_TRACE_ERROR0 ("PAN failed to write data for the PANU connection");
+            return result;
+        }
+
+        PAN_TRACE_DEBUG0 ("PAN successfully wrote data for the PANU connection");
+        return PAN_SUCCESS;
+    }
+
+    /* findout to which connection the data is meant for */
+    pcb = pan_get_pcb_by_handle (handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR0 ("PAN Buf write for wrong handle");
+        GKI_freebuf (p_buf);
+        return PAN_FAILURE;
+    }
+
+    if (pcb->con_state != PAN_STATE_CONNECTED)
+    {
+        PAN_TRACE_ERROR0 ("PAN Buf write when conn is not active");
+        GKI_freebuf (p_buf);
+        return PAN_FAILURE;
+    }
+
+    result = BNEP_WriteBuf (pcb->handle, dst, p_buf, protocol, src, ext);
+    if (result == BNEP_IGNORE_CMD)
+    {
+        PAN_TRACE_DEBUG0 ("PAN ignored data buf write to PANU");
+        return result;
+    }
+    else if (result != BNEP_SUCCESS)
+    {
+        PAN_TRACE_ERROR0 ("PAN failed to send data buf to the PANU");
+        return result;
+    }
+
+    PAN_TRACE_DEBUG0 ("PAN successfully sent data buf to the PANU");
+    return PAN_SUCCESS;
+}
+
+
+/*******************************************************************************
+**
+** Function         PAN_SetProtocolFilters
+**
+** Description      This function is used to set protocol filters on the peer
+**
+** Parameters:      handle      - handle for the connection
+**                  num_filters - number of protocol filter ranges
+**                  start       - array of starting protocol numbers
+**                  end         - array of ending protocol numbers
+**
+**
+** Returns          PAN_SUCCESS        if protocol filters are set successfully
+**                  PAN_FAILURE        if connection not found or error in setting
+**
+*******************************************************************************/
+tPAN_RESULT PAN_SetProtocolFilters (UINT16 handle,
+                                    UINT16 num_filters,
+                                    UINT16 *p_start_array,
+                                    UINT16 *p_end_array)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    tPAN_CONN       *pcb;
+    tPAN_RESULT     result;
+
+    /* Check if the connection exists */
+    pcb = pan_get_pcb_by_handle (handle);
+    if(!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN connection not found for the handle %d", handle);
+        return PAN_FAILURE;
+    }
+
+    result = BNEP_SetProtocolFilters (pcb->handle, num_filters, p_start_array, p_end_array);
+    if (result != BNEP_SUCCESS)
+    {
+        PAN_TRACE_ERROR1 ("PAN failed to set protocol filters for handle %d", handle);
+        return result;
+    }
+
+    PAN_TRACE_API1 ("PAN successfully sent protocol filters for handle %d", handle);
+    return PAN_SUCCESS;
+#else
+    return PAN_FAILURE;
+#endif
+}
+
+
+
+/*******************************************************************************
+**
+** Function         PAN_SetMulticastFilters
+**
+** Description      This function is used to set multicast filters on the peer
+**
+** Parameters:      handle      - handle for the connection
+**                  num_filters - number of multicast filter ranges
+**                  start       - array of starting multicast filter addresses
+**                  end         - array of ending multicast filter addresses
+**
+**
+** Returns          PAN_SUCCESS        if multicast filters are set successfully
+**                  PAN_FAILURE        if connection not found or error in setting
+**
+*******************************************************************************/
+tBNEP_RESULT PAN_SetMulticastFilters (UINT16 handle,
+                                      UINT16 num_mcast_filters,
+                                      UINT8 *p_start_array,
+                                      UINT8 *p_end_array)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    tPAN_CONN       *pcb;
+    tPAN_RESULT     result;
+
+    /* Check if the connection exists */
+    pcb = pan_get_pcb_by_handle (handle);
+    if(!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN connection not found for the handle %d", handle);
+        return PAN_FAILURE;
+    }
+
+    result = BNEP_SetMulticastFilters (pcb->handle,
+                            num_mcast_filters, p_start_array, p_end_array);
+    if (result != BNEP_SUCCESS)
+    {
+        PAN_TRACE_ERROR1 ("PAN failed to set multicast filters for handle %d", handle);
+        return result;
+    }
+
+    PAN_TRACE_API1 ("PAN successfully sent multicast filters for handle %d", handle);
+    return PAN_SUCCESS;
+#else
+    return PAN_FAILURE;
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         PAN_SetTraceLevel
+**
+** Description      This function sets the trace level for PAN. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 PAN_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        pan_cb.trace_level = new_level;
+    else
+        pan_dump_status ();
+
+    return (pan_cb.trace_level);
+}
+
+/*******************************************************************************
+**
+** Function         PAN_Init
+**
+** Description      This function initializes the PAN module variables
+**
+** Parameters:      none
+**
+** Returns          none
+**
+*******************************************************************************/
+void PAN_Init (void)
+{
+    memset (&pan_cb, 0, sizeof (tPAN_CB));
+
+#if defined(PAN_INITIAL_TRACE_LEVEL)
+    pan_cb.trace_level = PAN_INITIAL_TRACE_LEVEL;
+#else
+    pan_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+}
+
+
diff --git a/stack/pan/pan_int.h b/stack/pan/pan_int.h
new file mode 100644
index 0000000..4e02236
--- /dev/null
+++ b/stack/pan/pan_int.h
@@ -0,0 +1,158 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2001-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains internally used PAN definitions
+ *
+ ******************************************************************************/
+
+#ifndef  PAN_INT_H
+#define  PAN_INT_H
+
+#include "pan_api.h"
+
+/*
+** This role is used to shutdown the profile. Used internally
+** Applications should call PAN_Deregister to shutdown the profile
+*/
+#define PAN_ROLE_INACTIVE      0
+
+/* Protocols supported by the host internal stack, are registered with SDP */
+#define PAN_PROTOCOL_IP        0x0800
+#define PAN_PROTOCOL_ARP       0x0806
+
+#define PAN_PROFILE_VERSION    0x0100   /* Version 1.00 */
+
+/* Define the PAN Connection Control Block
+*/
+typedef struct
+{
+#define PAN_STATE_IDLE              0
+#define PAN_STATE_CONN_START        1
+#define PAN_STATE_CONNECTED         2
+    UINT8             con_state;
+
+#define PAN_FLAGS_CONN_COMPLETED    0x01
+    UINT8             con_flags;
+
+    UINT16            handle;
+    BD_ADDR           rem_bda;
+
+    UINT16            bad_pkts_rcvd;
+    UINT16            src_uuid;
+    UINT16            dst_uuid;
+    UINT16            prv_src_uuid;
+    UINT16            prv_dst_uuid;
+    UINT16            ip_addr_known;
+    UINT32            ip_addr;
+
+} tPAN_CONN;
+
+
+/*  The main PAN control block
+*/
+typedef struct
+{
+    UINT8                       role;
+    UINT8                       active_role;
+    UINT8                       prv_active_role;
+    tPAN_CONN                   pcb[MAX_PAN_CONNS];
+
+    tPAN_CONN_STATE_CB          *pan_conn_state_cb;     /* Connection state callback */
+    tPAN_BRIDGE_REQ_CB          *pan_bridge_req_cb;
+    tPAN_DATA_IND_CB            *pan_data_ind_cb;
+    tPAN_DATA_BUF_IND_CB        *pan_data_buf_ind_cb;
+    tPAN_FILTER_IND_CB          *pan_pfilt_ind_cb;      /* protocol filter indication callback */
+    tPAN_MFILTER_IND_CB         *pan_mfilt_ind_cb;      /* multicast filter indication callback */
+    tPAN_TX_DATA_FLOW_CB        *pan_tx_data_flow_cb;
+
+    BD_ADDR                     my_bda;                 /* BD Address of this device    */
+    char                        *user_service_name;
+    char                        *gn_service_name;
+    char                        *nap_service_name;
+    UINT32                      pan_user_sdp_handle;
+    UINT32                      pan_gn_sdp_handle;
+    UINT32                      pan_nap_sdp_handle;
+    UINT8                       num_conns;
+    UINT8                       trace_level;
+} tPAN_CB;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Global PAN data
+*/
+#if PAN_DYNAMIC_MEMORY == FALSE
+PAN_API extern tPAN_CB  pan_cb;
+#else
+PAN_API extern tPAN_CB  *pan_cb_ptr;
+#define pan_cb (*pan_cb_ptr)
+#endif
+
+/*******************************************************************************/
+extern void pan_register_with_bnep (void);
+extern void pan_conn_ind_cb (UINT16 handle,
+                             BD_ADDR p_bda,
+                             tBT_UUID *remote_uuid,
+                             tBT_UUID *local_uuid,
+                             BOOLEAN is_role_change);
+extern void pan_connect_state_cb (UINT16 handle, BD_ADDR rem_bda, tBNEP_RESULT result, BOOLEAN is_role_change);
+extern void pan_data_ind_cb (UINT16 handle,
+                             UINT8 *src,
+                             UINT8 *dst,
+                             UINT16 protocol,
+                             UINT8 *p_data,
+                             UINT16 len,
+                             BOOLEAN fw_ext_present);
+extern void pan_data_buf_ind_cb (UINT16 handle,
+                                 UINT8 *src,
+                                 UINT8 *dst,
+                                 UINT16 protocol,
+                                 BT_HDR *p_buf,
+                                 BOOLEAN ext);
+extern void pan_tx_data_flow_cb (UINT16 handle,
+                            tBNEP_RESULT  event);
+void pan_proto_filt_ind_cb (UINT16 handle,
+                            BOOLEAN indication,
+                            tBNEP_RESULT result,
+                            UINT16 num_filters,
+                            UINT8 *p_filters);
+void pan_mcast_filt_ind_cb (UINT16 handle,
+                            BOOLEAN indication,
+                            tBNEP_RESULT result,
+                            UINT16 num_filters,
+                            UINT8 *p_filters);
+extern UINT32 pan_register_with_sdp (UINT16 uuid, UINT8 sec_mask, char *p_name, char *p_desc);
+extern tPAN_CONN *pan_allocate_pcb (BD_ADDR p_bda, UINT16 handle);
+extern tPAN_CONN *pan_get_pcb_by_handle (UINT16 handle);
+extern tPAN_CONN *pan_get_pcb_by_addr (BD_ADDR p_bda);
+extern void pan_close_all_connections (void);
+extern void pan_release_pcb (tPAN_CONN *p_pcb);
+extern void pan_dump_status (void);
+
+/********************************************************************************/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/stack/pan/pan_main.c b/stack/pan/pan_main.c
new file mode 100644
index 0000000..6cbe1ce
--- /dev/null
+++ b/stack/pan/pan_main.c
@@ -0,0 +1,730 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains main functions to support PAN profile
+ *  commands and events.
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "gki.h"
+#include "bt_types.h"
+#include "bnep_api.h"
+#include "pan_api.h"
+#include "pan_int.h"
+#include "sdp_api.h"
+#include "sdpdefs.h"
+#include "l2c_api.h"
+#include "hcidefs.h"
+
+
+#if PAN_DYNAMIC_MEMORY == FALSE
+tPAN_CB  pan_cb;
+#endif
+
+#define UUID_CONSTANT_PART  12
+UINT8 constant_pan_uuid[UUID_CONSTANT_PART] = {0, 0, 0x10, 0, 0x80, 0x00, 0x00, 0x80, 0x5f, 0x9b, 0x34, 0xfb};
+
+
+/*******************************************************************************
+**
+** Function         pan_register_with_bnep
+**
+** Description      This function registers PAN profile with BNEP
+**
+** Parameters:      none
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_register_with_bnep (void)
+{
+    tBNEP_REGISTER      reg_info;
+
+    memset (&reg_info, 0, sizeof (tBNEP_REGISTER));
+
+    reg_info.p_conn_ind_cb      = pan_conn_ind_cb;
+    reg_info.p_conn_state_cb    = pan_connect_state_cb;
+    reg_info.p_data_buf_cb      = pan_data_buf_ind_cb;
+    reg_info.p_data_ind_cb      = NULL;
+    reg_info.p_tx_data_flow_cb  = pan_tx_data_flow_cb;
+    reg_info.p_filter_ind_cb    = pan_proto_filt_ind_cb;
+    reg_info.p_mfilter_ind_cb   = pan_mcast_filt_ind_cb;
+
+    BNEP_Register (&reg_info);
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_conn_ind_cb
+**
+** Description      This function is registered with BNEP as connection indication
+**                  callback. BNEP will call this when there is connection
+**                  request from the peer. PAN should call BNEP_ConnectResp to
+**                  indicate whether to accept the connection or reject
+**
+** Parameters:      handle          - handle for the connection
+**                  p_bda           - BD Addr of the peer requesting the connection
+**                  remote_uuid     - UUID of the source role (peer device role)
+**                  local_uuid      - UUID of the destination role (local device role)
+**                  is_role_change  - Flag to indicate that it is a role change
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_conn_ind_cb (UINT16 handle,
+                      BD_ADDR p_bda,
+                      tBT_UUID *remote_uuid,
+                      tBT_UUID *local_uuid,
+                      BOOLEAN is_role_change)
+{
+    tPAN_CONN       *pcb;
+    UINT8           req_role;
+    BOOLEAN         wrong_uuid;
+
+    /*
+    ** If we are in GN or NAP role and have one or more
+    ** active connections and the received connection is
+    ** for user role reject it.
+    ** If we are in user role with one connection active
+    ** reject the connection.
+    ** Allocate PCB and store the parameters
+    ** Make bridge request to the host system if connection
+    ** is for NAP
+    */
+    wrong_uuid = FALSE;
+#if (defined (BNEP_SUPPORTS_ALL_UUID_LENGTHS) && BNEP_SUPPORTS_ALL_UUID_LENGTHS == TRUE)
+    if (remote_uuid->len == 16)
+    {
+        /*
+        ** If the UUID is 16 bytes forst two bytes should be zeros
+        ** and last 12 bytes should match the spec defined constant value
+        */
+        if (memcmp (constant_pan_uuid, remote_uuid->uu.uuid128 + 4, UUID_CONSTANT_PART))
+            wrong_uuid = TRUE;
+
+        if (remote_uuid->uu.uuid128[0] || remote_uuid->uu.uuid128[1])
+            wrong_uuid = TRUE;
+
+        /* Extract the 16 bit equivalent of the UUID */
+        remote_uuid->uu.uuid16 = (UINT16)((remote_uuid->uu.uuid128[2] << 8) | remote_uuid->uu.uuid128[3]);
+        remote_uuid->len = 2;
+    }
+    if (remote_uuid->len == 4)
+    {
+        /* First two bytes should be zeros */
+        if (remote_uuid->uu.uuid32 & 0xFFFF0000)
+            wrong_uuid = TRUE;
+
+        remote_uuid->uu.uuid16 = (UINT16)remote_uuid->uu.uuid32;
+        remote_uuid->len = 2;
+    }
+
+    if (wrong_uuid)
+    {
+        PAN_TRACE_ERROR0 ("PAN Connection failed because of wrong remote UUID ");
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_SRC_UUID);
+        return;
+    }
+
+    wrong_uuid = FALSE;
+    if (local_uuid->len == 16)
+    {
+        /*
+        ** If the UUID is 16 bytes forst two bytes should be zeros
+        ** and last 12 bytes should match the spec defined constant value
+        */
+        if (memcmp (constant_pan_uuid, local_uuid->uu.uuid128 + 4, UUID_CONSTANT_PART))
+            wrong_uuid = TRUE;
+
+        if (local_uuid->uu.uuid128[0] || local_uuid->uu.uuid128[1])
+            wrong_uuid = TRUE;
+
+        /* Extract the 16 bit equivalent of the UUID */
+        local_uuid->uu.uuid16 = (UINT16)((local_uuid->uu.uuid128[2] << 8) | local_uuid->uu.uuid128[3]);
+        local_uuid->len = 2;
+    }
+    if (local_uuid->len == 4)
+    {
+        /* First two bytes should be zeros */
+        if (local_uuid->uu.uuid32 & 0xFFFF0000)
+            wrong_uuid = TRUE;
+
+        local_uuid->uu.uuid16 = (UINT16)local_uuid->uu.uuid32;
+        local_uuid->len = 2;
+    }
+
+    if (wrong_uuid)
+    {
+        PAN_TRACE_ERROR0 ("PAN Connection failed because of wrong local UUID ");
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_DST_UUID);
+        return;
+    }
+
+    PAN_TRACE_EVENT5 ("pan_conn_ind_cb - for handle %d, current role %d, dst uuid 0x%x, src uuid 0x%x, role change %s",
+        handle, pan_cb.role, local_uuid->uu.uuid16, remote_uuid->uu.uuid16, is_role_change?"YES":"NO");
+    /* The acceptable UUID size is only 2 */
+    if (remote_uuid->len != 2)
+    {
+        PAN_TRACE_ERROR1 ("PAN Connection failed because of wrong UUID size %d", remote_uuid->len);
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_UUID_SIZE);
+        return;
+    }
+#endif
+
+    /* Check if the source UUID is a valid one */
+    if (remote_uuid->uu.uuid16 != UUID_SERVCLASS_PANU &&
+        remote_uuid->uu.uuid16 != UUID_SERVCLASS_NAP &&
+        remote_uuid->uu.uuid16 != UUID_SERVCLASS_GN)
+    {
+        PAN_TRACE_ERROR1 ("Src UUID 0x%x is not valid", remote_uuid->uu.uuid16);
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_SRC_UUID);
+        return;
+    }
+
+    /* Check if the destination UUID is a valid one */
+    if (local_uuid->uu.uuid16 != UUID_SERVCLASS_PANU &&
+        local_uuid->uu.uuid16 != UUID_SERVCLASS_NAP &&
+        local_uuid->uu.uuid16 != UUID_SERVCLASS_GN)
+    {
+        PAN_TRACE_ERROR1 ("Dst UUID 0x%x is not valid", remote_uuid->uu.uuid16);
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_DST_UUID);
+        return;
+    }
+
+    /* Check if currently we support the destination role requested */
+    if (((!(pan_cb.role & UUID_SERVCLASS_PANU))
+        && local_uuid->uu.uuid16 == UUID_SERVCLASS_PANU) ||
+        ((!(pan_cb.role & UUID_SERVCLASS_GN))
+        && local_uuid->uu.uuid16 == UUID_SERVCLASS_GN) ||
+        ((!(pan_cb.role & UUID_SERVCLASS_NAP))
+        && local_uuid->uu.uuid16 == UUID_SERVCLASS_NAP))
+    {
+        PAN_TRACE_ERROR1 ("PAN Connection failed because of unsupported destination UUID 0x%x", local_uuid->uu.uuid16);
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED_DST_UUID);
+        return;
+    }
+
+    /* Requested destination role is */
+    if (local_uuid->uu.uuid16 == UUID_SERVCLASS_PANU)
+        req_role = PAN_ROLE_CLIENT;
+    else if (local_uuid->uu.uuid16 == UUID_SERVCLASS_GN)
+        req_role = PAN_ROLE_GN_SERVER;
+    else
+        req_role = PAN_ROLE_NAP_SERVER;
+
+    /* If the connection indication is for the existing connection
+    ** Check if the new destination role is acceptable
+    */
+    pcb = pan_get_pcb_by_handle (handle);
+    if (pcb)
+    {
+        if (pan_cb.num_conns > 1 && local_uuid->uu.uuid16 == UUID_SERVCLASS_PANU)
+        {
+            /* There are connections other than this one
+            ** so we cann't accept PANU role. Reject
+            */
+            PAN_TRACE_ERROR0 ("Dst UUID should be either GN or NAP only because there are other connections");
+            BNEP_ConnectResp (handle, BNEP_CONN_FAILED_DST_UUID);
+            return;
+        }
+
+        /* If it is already in connected state check for bridging status */
+        if (pcb->con_state == PAN_STATE_CONNECTED)
+        {
+            PAN_TRACE_EVENT2 ("PAN Role changing New Src 0x%x Dst 0x%x",
+                remote_uuid->uu.uuid16, local_uuid->uu.uuid16);
+
+            pcb->prv_src_uuid = pcb->src_uuid;
+            pcb->prv_dst_uuid = pcb->dst_uuid;
+
+            if (pcb->src_uuid == UUID_SERVCLASS_NAP &&
+                local_uuid->uu.uuid16 != UUID_SERVCLASS_NAP)
+            {
+                /* Remove bridging */
+                if (pan_cb.pan_bridge_req_cb)
+                    (*pan_cb.pan_bridge_req_cb) (pcb->rem_bda, FALSE);
+            }
+        }
+        /* Set the latest active PAN role */
+        pan_cb.active_role = req_role;
+        pcb->src_uuid = local_uuid->uu.uuid16;
+        pcb->dst_uuid = remote_uuid->uu.uuid16;
+        BNEP_ConnectResp (handle, BNEP_SUCCESS);
+        return;
+    }
+    else
+    {
+        /* If this a new connection and destination is PANU role and
+        ** we already have a connection then reject the request.
+        ** If we have a connection in PANU role then reject it
+        */
+        if (pan_cb.num_conns &&
+            (local_uuid->uu.uuid16 == UUID_SERVCLASS_PANU ||
+            pan_cb.active_role == PAN_ROLE_CLIENT))
+        {
+            PAN_TRACE_ERROR0 ("PAN already have a connection and can't be user");
+            BNEP_ConnectResp (handle, BNEP_CONN_FAILED_DST_UUID);
+            return;
+        }
+    }
+
+    /* This is a new connection */
+    PAN_TRACE_DEBUG1 ("New connection indication for handle %d", handle);
+    pcb = pan_allocate_pcb (p_bda, handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR0 ("PAN no control block for new connection");
+        BNEP_ConnectResp (handle, BNEP_CONN_FAILED);
+        return;
+    }
+
+    PAN_TRACE_EVENT1 ("PAN connection destination UUID is 0x%x", local_uuid->uu.uuid16);
+    /* Set the latest active PAN role */
+    pan_cb.active_role = req_role;
+    pcb->src_uuid = local_uuid->uu.uuid16;
+    pcb->dst_uuid = remote_uuid->uu.uuid16;
+    pcb->con_state = PAN_STATE_CONN_START;
+    pan_cb.num_conns++;
+
+    BNEP_ConnectResp (handle, BNEP_SUCCESS);
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_connect_state_cb
+**
+** Description      This function is registered with BNEP as connection state
+**                  change callback. BNEP will call this when the connection
+**                  is established successfully or terminated
+**
+** Parameters:      handle      - handle for the connection given in the connection
+**                                      indication callback
+**                  rem_bda     - remote device bd addr
+**                  result      - indicates whether the connection is up or down
+**                                      BNEP_SUCCESS if the connection is up
+**                                      all other values indicates appropriate errors
+**                  is_role_change - flag to indicate that it is a role change
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_connect_state_cb (UINT16 handle, BD_ADDR rem_bda, tBNEP_RESULT result, BOOLEAN is_role_change)
+{
+    tPAN_CONN       *pcb;
+    UINT8            peer_role;
+
+    PAN_TRACE_EVENT2 ("pan_connect_state_cb - for handle %d, result %d", handle, result);
+    pcb = pan_get_pcb_by_handle (handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN State change indication for wrong handle %d", handle);
+        return;
+    }
+
+    /* If the connection is getting terminated remove bridging */
+    if (result != BNEP_SUCCESS)
+    {
+        /* Inform the application that connection is down */
+        if (pan_cb.pan_conn_state_cb)
+            (*pan_cb.pan_conn_state_cb) (pcb->handle, pcb->rem_bda, result, is_role_change, PAN_ROLE_INACTIVE, PAN_ROLE_INACTIVE);
+
+        /* Check if this failure is for role change only */
+        if (pcb->con_state != PAN_STATE_CONNECTED &&
+            (pcb->con_flags & PAN_FLAGS_CONN_COMPLETED))
+        {
+            /* restore the original values */
+            PAN_TRACE_EVENT0 ("restoring the connection state to active");
+            pcb->con_state = PAN_STATE_CONNECTED;
+            pcb->con_flags &= (~PAN_FLAGS_CONN_COMPLETED);
+
+            pcb->src_uuid = pcb->prv_src_uuid;
+            pcb->dst_uuid = pcb->prv_dst_uuid;
+            pan_cb.active_role = pan_cb.prv_active_role;
+
+            if ((pcb->src_uuid == UUID_SERVCLASS_NAP) && pan_cb.pan_bridge_req_cb)
+                (*pan_cb.pan_bridge_req_cb) (pcb->rem_bda, TRUE);
+
+            return;
+        }
+
+        if (pcb->con_state == PAN_STATE_CONNECTED)
+        {
+            /* If the connections destination role is NAP remove bridging */
+            if ((pcb->src_uuid == UUID_SERVCLASS_NAP) && pan_cb.pan_bridge_req_cb)
+                (*pan_cb.pan_bridge_req_cb) (pcb->rem_bda, FALSE);
+        }
+
+        pan_cb.num_conns--;
+        pan_release_pcb (pcb);
+        return;
+    }
+
+    /* Requested destination role is */
+    if (pcb->src_uuid == UUID_SERVCLASS_PANU)
+        pan_cb.active_role = PAN_ROLE_CLIENT;
+    else if (pcb->src_uuid == UUID_SERVCLASS_GN)
+        pan_cb.active_role = PAN_ROLE_GN_SERVER;
+    else
+        pan_cb.active_role = PAN_ROLE_NAP_SERVER;
+
+    if (pcb->dst_uuid == UUID_SERVCLASS_PANU)
+        peer_role = PAN_ROLE_CLIENT;
+    else if (pcb->dst_uuid == UUID_SERVCLASS_GN)
+        peer_role = PAN_ROLE_GN_SERVER;
+    else
+        peer_role = PAN_ROLE_NAP_SERVER;
+
+    pcb->con_state = PAN_STATE_CONNECTED;
+
+    /* Inform the application that connection is down */
+    if (pan_cb.pan_conn_state_cb)
+        (*pan_cb.pan_conn_state_cb) (pcb->handle, pcb->rem_bda, PAN_SUCCESS, is_role_change, pan_cb.active_role, peer_role);
+
+    /* Create bridge if the destination role is NAP */
+    if (pan_cb.pan_bridge_req_cb && pcb->src_uuid == UUID_SERVCLASS_NAP)
+    {
+        PAN_TRACE_EVENT0 ("PAN requesting for bridge");
+        (*pan_cb.pan_bridge_req_cb) (pcb->rem_bda, TRUE);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_data_ind_cb
+**
+** Description      This function is registered with BNEP as data indication
+**                  callback. BNEP will call this when the peer sends any data
+**                  on this connection
+**
+** Parameters:      handle      - handle for the connection
+**                  src         - source BD Addr
+**                  dst         - destination BD Addr
+**                  protocol    - Network protocol of the Eth packet
+**                  p_data      - pointer to the data
+**                  len         - length of the data
+**                  fw_ext_present - to indicate whether the data contains any
+**                                         extension headers before the payload
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_data_ind_cb (UINT16 handle,
+                      UINT8 *src,
+                      UINT8 *dst,
+                      UINT16 protocol,
+                      UINT8 *p_data,
+                      UINT16 len,
+                      BOOLEAN ext)
+{
+    tPAN_CONN       *pcb;
+    UINT16          i;
+    BOOLEAN         forward;
+
+    /*
+    ** Check the connection status
+    ** If the destination address is MAC broadcast send on all links
+    ** except on the one received
+    ** If the destination uuid is for NAP send to host system also
+    ** If the destination address is one of the devices connected
+    ** send the packet to over that link
+    ** If the destination address is unknown and destination uuid is NAP
+    ** send it to the host system
+    */
+
+    PAN_TRACE_EVENT1 ("pan_data_ind_cb - for handle %d", handle);
+    pcb = pan_get_pcb_by_handle (handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN Data indication for wrong handle %d", handle);
+        return;
+    }
+
+    if (pcb->con_state != PAN_STATE_CONNECTED)
+    {
+        PAN_TRACE_ERROR2 ("PAN Data indication in wrong state %d for handle %d",
+            pcb->con_state, handle);
+        return;
+    }
+
+    /* Check if it is broadcast packet */
+    if (dst[0] & 0x01)
+    {
+        PAN_TRACE_DEBUG2 ("PAN received broadcast packet on handle %d, src uuid 0x%x",
+            handle, pcb->src_uuid);
+        for (i=0; i<MAX_PAN_CONNS; i++)
+        {
+            if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
+                pan_cb.pcb[i].handle != handle &&
+                pcb->src_uuid == pan_cb.pcb[i].src_uuid)
+            {
+                BNEP_Write (pan_cb.pcb[i].handle, dst, p_data, len, protocol, src, ext);
+            }
+        }
+
+        if (pan_cb.pan_data_ind_cb)
+            (*pan_cb.pan_data_ind_cb) (pcb->handle, src, dst, protocol, p_data, len, ext, TRUE);
+
+        return;
+    }
+
+    /* Check if it is for any other PAN connection */
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
+            pcb->src_uuid == pan_cb.pcb[i].src_uuid)
+        {
+            if (memcmp (pan_cb.pcb[i].rem_bda, dst, BD_ADDR_LEN) == 0)
+            {
+                BNEP_Write (pan_cb.pcb[i].handle, dst, p_data, len, protocol, src, ext);
+                return;
+            }
+        }
+    }
+
+   if (pcb->src_uuid == UUID_SERVCLASS_NAP)
+       forward = TRUE;
+   else
+       forward = FALSE;
+
+    /* Send it over the LAN or give it to host software */
+    if (pan_cb.pan_data_ind_cb)
+        (*pan_cb.pan_data_ind_cb) (pcb->handle, src, dst, protocol, p_data, len, ext, forward);
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_data_buf_ind_cb
+**
+** Description      This function is registered with BNEP as data buffer indication
+**                  callback. BNEP will call this when the peer sends any data
+**                  on this connection. PAN is responsible to release the buffer
+**
+** Parameters:      handle      - handle for the connection
+**                  src         - source BD Addr
+**                  dst         - destination BD Addr
+**                  protocol    - Network protocol of the Eth packet
+**                  p_buf       - pointer to the data buffer
+**                  ext         - to indicate whether the data contains any
+**                                         extension headers before the payload
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_data_buf_ind_cb (UINT16 handle,
+                          UINT8 *src,
+                          UINT8 *dst,
+                          UINT16 protocol,
+                          BT_HDR *p_buf,
+                          BOOLEAN ext)
+{
+    tPAN_CONN       *pcb, *dst_pcb;
+    tBNEP_RESULT    result;
+    UINT16          i, len;
+    UINT8           *p_data;
+    BOOLEAN         forward = FALSE;
+
+    /* Check if the connection is in right state */
+    pcb = pan_get_pcb_by_handle (handle);
+    if (!pcb)
+    {
+        PAN_TRACE_ERROR1 ("PAN Data buffer indication for wrong handle %d", handle);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    if (pcb->con_state != PAN_STATE_CONNECTED)
+    {
+        PAN_TRACE_ERROR2 ("PAN Data indication in wrong state %d for handle %d",
+            pcb->con_state, handle);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    len    = p_buf->len;
+
+    PAN_TRACE_EVENT4 ("pan_data_buf_ind_cb - for handle %d, protocol 0x%x, length %d, ext %d",
+        handle, protocol, len, ext);
+
+   if (pcb->src_uuid == UUID_SERVCLASS_NAP)
+       forward = TRUE;
+   else
+       forward = FALSE;
+
+    /* Check if it is broadcast or multicast packet */
+    if (pcb->src_uuid != UUID_SERVCLASS_PANU)
+    {
+        if (dst[0] & 0x01)
+        {
+            PAN_TRACE_DEBUG2 ("PAN received broadcast packet on handle %d, src uuid 0x%x",
+                handle, pcb->src_uuid);
+            for (i=0; i<MAX_PAN_CONNS; i++)
+            {
+                if (pan_cb.pcb[i].con_state == PAN_STATE_CONNECTED &&
+                    pan_cb.pcb[i].handle != handle &&
+                    pcb->src_uuid == pan_cb.pcb[i].src_uuid)
+                {
+                    BNEP_Write (pan_cb.pcb[i].handle, dst, p_data, len, protocol, src, ext);
+                }
+            }
+
+            if (pan_cb.pan_data_buf_ind_cb)
+                (*pan_cb.pan_data_buf_ind_cb) (pcb->handle, src, dst, protocol, p_buf, ext, forward);
+            else if (pan_cb.pan_data_ind_cb)
+            {
+                (*pan_cb.pan_data_ind_cb) (pcb->handle, src, dst, protocol, p_data, len, ext, forward);
+                GKI_freebuf (p_buf);
+            }
+
+            return;
+        }
+
+        /* Check if it is for any other PAN connection */
+        dst_pcb = pan_get_pcb_by_addr (dst);
+        if (dst_pcb)
+        {
+            PAN_TRACE_EVENT0 ("pan_data_buf_ind_cb - destination PANU found and sending the data");
+            result = BNEP_WriteBuf (dst_pcb->handle, dst, p_buf, protocol, src, ext);
+            if (result != BNEP_SUCCESS && result != BNEP_IGNORE_CMD)
+                PAN_TRACE_ERROR1 ("Failed to write data for PAN connection handle %d", dst_pcb->handle);
+            return;
+        }
+    }
+
+    /* Send it over the LAN or give it to host software */
+    if (pan_cb.pan_data_buf_ind_cb)
+        (*pan_cb.pan_data_buf_ind_cb) (pcb->handle, src, dst, protocol, p_buf, ext, forward);
+    else if (pan_cb.pan_data_ind_cb)
+    {
+        (*pan_cb.pan_data_ind_cb) (pcb->handle, src, dst, protocol, p_data, len, ext, forward);
+        GKI_freebuf (p_buf);
+    }
+    else
+        GKI_freebuf (p_buf);
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         pan_proto_filt_ind_cb
+**
+** Description      This function is registered with BNEP to receive tx data
+**					flow status
+**
+** Parameters:      handle      - handle for the connection
+**					event       - flow status
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_tx_data_flow_cb (UINT16 handle,
+                            tBNEP_RESULT  event)
+{
+
+    if (pan_cb.pan_tx_data_flow_cb)
+        (*pan_cb.pan_tx_data_flow_cb) (handle, event);
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         pan_proto_filt_ind_cb
+**
+** Description      This function is registered with BNEP as proto filter indication
+**                  callback. BNEP will call this when the peer sends any protocol
+**                  filter set for the connection or to indicate the result of the
+**                  protocol filter set by the local device
+**
+** Parameters:      handle      - handle for the connection
+**                  indication  - TRUE if this is indication
+**                                FALSE if it is called to give the result of local
+**                                      device protocol filter set
+**                  result      - This gives the result of the filter set operation
+**                  num_filters - number of filters set by the peer device
+**                  p_filters   - pointer to the filters set by the peer device
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_proto_filt_ind_cb (UINT16 handle,
+                            BOOLEAN indication,
+                            tBNEP_RESULT result,
+                            UINT16 num_filters,
+                            UINT8 *p_filters)
+{
+#if (defined (BNEP_SUPPORTS_PROT_FILTERS) && BNEP_SUPPORTS_PROT_FILTERS == TRUE)
+    PAN_TRACE_EVENT4 ("pan_proto_filt_ind_cb - called for handle %d with ind %d, result %d, num %d",
+                            handle, indication, result, num_filters);
+
+    if (pan_cb.pan_pfilt_ind_cb)
+        (*pan_cb.pan_pfilt_ind_cb) (handle, indication, result, num_filters, p_filters);
+#endif
+
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_mcast_filt_ind_cb
+**
+** Description      This function is registered with BNEP as mcast filter indication
+**                  callback. BNEP will call this when the peer sends any multicast
+**                  filter set for the connection or to indicate the result of the
+**                  multicast filter set by the local device
+**
+** Parameters:      handle      - handle for the connection
+**                  indication  - TRUE if this is indication
+**                                FALSE if it is called to give the result of local
+**                                      device multicast filter set
+**                  result      - This gives the result of the filter set operation
+**                  num_filters - number of filters set by the peer device
+**                  p_filters   - pointer to the filters set by the peer device
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_mcast_filt_ind_cb (UINT16 handle,
+                            BOOLEAN indication,
+                            tBNEP_RESULT result,
+                            UINT16 num_filters,
+                            UINT8 *p_filters)
+{
+#if (defined (BNEP_SUPPORTS_MULTI_FILTERS) && BNEP_SUPPORTS_MULTI_FILTERS == TRUE)
+    PAN_TRACE_EVENT4 ("pan_mcast_filt_ind_cb - called for handle %d with ind %d, result %d, num %d",
+                            handle, indication, result, num_filters);
+
+    if (pan_cb.pan_mfilt_ind_cb)
+        (*pan_cb.pan_mfilt_ind_cb) (handle, indication, result, num_filters, p_filters);
+#endif
+
+    return;
+}
+
diff --git a/stack/pan/pan_utils.c b/stack/pan/pan_utils.c
new file mode 100644
index 0000000..9ebbb75
--- /dev/null
+++ b/stack/pan/pan_utils.c
@@ -0,0 +1,351 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains main functions to support PAN profile
+ *  commands and events.
+ *
+ *****************************************************************************/
+
+#include <string.h>
+#include <stdio.h>
+#include "gki.h"
+#include "bnep_api.h"
+#include "pan_api.h"
+#include "pan_int.h"
+#include "sdp_api.h"
+#include "sdpdefs.h"
+#include "l2c_api.h"
+#include "hcidefs.h"
+#include "btm_api.h"
+
+
+static const UINT8 pan_proto_elem_data[]   = {
+                                   0x35, 0x18,          /* data element sequence of length 0x18 bytes */
+                                   0x35, 0x06,          /* data element sequence for L2CAP descriptor */
+                                   0x19, 0x01, 0x00,    /* UUID for L2CAP - 0x0100 */
+                                   0x09, 0x00, 0x0F,    /* PSM for BNEP - 0x000F */
+                                   0x35, 0x0E,          /* data element seqence for BNEP descriptor */
+                                   0x19, 0x00, 0x0F,    /* UUID for BNEP - 0x000F */
+                                   0x09, 0x01, 0x00,    /* BNEP specific parameter 0 -- Version of BNEP = version 1 = 0x0001 */
+                                   0x35, 0x06,          /* BNEP specific parameter 1 -- Supported network packet type list */
+                                   0x09, 0x08, 0x00,    /* network packet type IPv4 = 0x0800 */
+                                   0x09, 0x08, 0x06     /* network packet type ARP  = 0x0806 */
+};
+
+/*******************************************************************************
+**
+** Function         pan_register_with_sdp
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+UINT32 pan_register_with_sdp (UINT16 uuid, UINT8 sec_mask, char *p_name, char *p_desc)
+{
+    UINT32  sdp_handle;
+    UINT16  browse_list = UUID_SERVCLASS_PUBLIC_BROWSE_GROUP;
+    UINT16  security = 0;
+    UINT8   availability;
+    UINT32  proto_len = (UINT32)pan_proto_elem_data[1];
+
+    /* Create a record */
+    sdp_handle = SDP_CreateRecord ();
+
+    if (sdp_handle == 0)
+    {
+        PAN_TRACE_ERROR0 ("PAN_SetRole - could not create SDP record");
+        return 0;
+    }
+
+    /* Service Class ID List */
+    SDP_AddServiceClassIdList (sdp_handle, 1, &uuid);
+
+    /* Add protocol element sequence from the constant string */
+    SDP_AddAttribute (sdp_handle, ATTR_ID_PROTOCOL_DESC_LIST, DATA_ELE_SEQ_DESC_TYPE,
+                      proto_len, (UINT8 *)(pan_proto_elem_data+2));
+
+// btla-specific ++
+#if 0
+    availability = 0xFF;
+    SDP_AddAttribute (sdp_handle, ATTR_ID_SERVICE_AVAILABILITY, UINT_DESC_TYPE, 1, &availability);
+#endif
+// btla-specific --
+
+    /* Language base */
+    SDP_AddLanguageBaseAttrIDList (sdp_handle, LANG_ID_CODE_ENGLISH, LANG_ID_CHAR_ENCODE_UTF8, LANGUAGE_BASE_ID);
+
+    /* Profile descriptor list */
+    SDP_AddProfileDescriptorList (sdp_handle, uuid, PAN_PROFILE_VERSION);
+
+    /* Service Name */
+    SDP_AddAttribute (sdp_handle, ATTR_ID_SERVICE_NAME, TEXT_STR_DESC_TYPE,
+                        (UINT8) (strlen(p_name) + 1), (UINT8 *)p_name);
+
+    /* Service description */
+    SDP_AddAttribute (sdp_handle, ATTR_ID_SERVICE_DESCRIPTION, TEXT_STR_DESC_TYPE,
+                        (UINT8) (strlen(p_desc) + 1), (UINT8 *)p_desc);
+
+    /* Security description */
+    if (sec_mask)
+    {
+        UINT16_TO_BE_FIELD(&security, 0x0001);
+    }
+    SDP_AddAttribute (sdp_handle, ATTR_ID_SECURITY_DESCRIPTION, UINT_DESC_TYPE, 2, (UINT8 *)&security);
+
+#if (defined (PAN_SUPPORTS_ROLE_NAP) && PAN_SUPPORTS_ROLE_NAP == TRUE)
+    if (uuid == UUID_SERVCLASS_NAP)
+    {
+        UINT16  NetAccessType = 0x0005;      /* Ethernet */
+        UINT32  NetAccessRate = 0x0001312D0; /* 10Mb/sec */
+        UINT8   array[10], *p;
+
+        /* Net access type. */
+        p = array;
+        UINT16_TO_BE_STREAM (p, NetAccessType);
+        SDP_AddAttribute (sdp_handle, ATTR_ID_NET_ACCESS_TYPE, UINT_DESC_TYPE, 2, array);
+
+        /* Net access rate. */
+        p = array;
+        UINT32_TO_BE_STREAM (p, NetAccessRate);
+        SDP_AddAttribute (sdp_handle, ATTR_ID_MAX_NET_ACCESS_RATE, UINT_DESC_TYPE, 4, array);
+
+        /* Register with Security Manager for the specific security level */
+        if ((!BTM_SetSecurityLevel (TRUE, p_name, BTM_SEC_SERVICE_BNEP_NAP,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_NAP))
+         || (!BTM_SetSecurityLevel (FALSE, p_name, BTM_SEC_SERVICE_BNEP_NAP,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_NAP)))
+        {
+            PAN_TRACE_ERROR0 ("PAN Security Registration failed for PANU");
+        }
+    }
+#endif
+#if (defined (PAN_SUPPORTS_ROLE_GN) && PAN_SUPPORTS_ROLE_GN == TRUE)
+    if (uuid == UUID_SERVCLASS_GN)
+    {
+        if ((!BTM_SetSecurityLevel (TRUE, p_name, BTM_SEC_SERVICE_BNEP_GN,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_GN))
+         || (!BTM_SetSecurityLevel (FALSE, p_name, BTM_SEC_SERVICE_BNEP_GN,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_GN)))
+        {
+            PAN_TRACE_ERROR0 ("PAN Security Registration failed for GN");
+        }
+    }
+#endif
+#if (defined (PAN_SUPPORTS_ROLE_PANU) && PAN_SUPPORTS_ROLE_PANU == TRUE)
+    if (uuid == UUID_SERVCLASS_PANU)
+    {
+        if ((!BTM_SetSecurityLevel (TRUE, p_name, BTM_SEC_SERVICE_BNEP_PANU,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_PANU))
+         || (!BTM_SetSecurityLevel (FALSE, p_name, BTM_SEC_SERVICE_BNEP_PANU,
+                                    sec_mask, BT_PSM_BNEP, BTM_SEC_PROTO_BNEP, UUID_SERVCLASS_PANU)))
+        {
+            PAN_TRACE_ERROR0 ("PAN Security Registration failed for PANU");
+        }
+    }
+#endif
+
+    /* Make the service browsable */
+    SDP_AddUuidSequence (sdp_handle,  ATTR_ID_BROWSE_GROUP_LIST, 1, &browse_list);
+
+
+    return sdp_handle;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         pan_allocate_pcb
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+tPAN_CONN *pan_allocate_pcb (BD_ADDR p_bda, UINT16 handle)
+{
+    UINT16      i;
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state != PAN_STATE_IDLE &&
+            pan_cb.pcb[i].handle == handle)
+            return NULL;
+    }
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state != PAN_STATE_IDLE &&
+            memcmp (pan_cb.pcb[i].rem_bda, p_bda, BD_ADDR_LEN) == 0)
+            return NULL;
+    }
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state == PAN_STATE_IDLE)
+        {
+            memset (&(pan_cb.pcb[i]), 0, sizeof (tPAN_CONN));
+            memcpy (pan_cb.pcb[i].rem_bda, p_bda, BD_ADDR_LEN);
+            pan_cb.pcb[i].handle = handle;
+            return &(pan_cb.pcb[i]);
+        }
+    }
+    return NULL;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_get_pcb_by_handle
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+tPAN_CONN *pan_get_pcb_by_handle (UINT16 handle)
+{
+    UINT16      i;
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state != PAN_STATE_IDLE &&
+            pan_cb.pcb[i].handle == handle)
+            return &(pan_cb.pcb[i]);
+    }
+
+    return NULL;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_get_pcb_by_addr
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+tPAN_CONN *pan_get_pcb_by_addr (BD_ADDR p_bda)
+{
+    UINT16      i;
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state == PAN_STATE_IDLE)
+            continue;
+
+        if (memcmp (pan_cb.pcb[i].rem_bda, p_bda, BD_ADDR_LEN) == 0)
+            return &(pan_cb.pcb[i]);
+
+        /*
+        if (pan_cb.pcb[i].mfilter_present &&
+            (memcmp (p_bda, pan_cb.pcb[i].multi_cast_bridge, BD_ADDR_LEN) == 0))
+            return &(pan_cb.pcb[i]);
+        */
+    }
+
+    return NULL;
+}
+
+
+
+
+/*******************************************************************************
+**
+** Function         pan_close_all_connections
+**
+** Description
+**
+** Returns          void
+**
+*******************************************************************************/
+void pan_close_all_connections (void)
+{
+    UINT16      i;
+
+    for (i=0; i<MAX_PAN_CONNS; i++)
+    {
+        if (pan_cb.pcb[i].con_state != PAN_STATE_IDLE)
+        {
+            BNEP_Disconnect (pan_cb.pcb[i].handle);
+            pan_cb.pcb[i].con_state = PAN_STATE_IDLE;
+        }
+    }
+
+    pan_cb.active_role = PAN_ROLE_INACTIVE;
+    pan_cb.num_conns   = 0;
+    return;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_release_pcb
+**
+** Description      This function releases a PCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void pan_release_pcb (tPAN_CONN *p_pcb)
+{
+    /* Drop any response pointer we may be holding */
+    memset (p_pcb, 0, sizeof (tPAN_CONN));
+    p_pcb->con_state = PAN_STATE_IDLE;
+}
+
+
+/*******************************************************************************
+**
+** Function         pan_dump_status
+**
+** Description      This function dumps the pan control block and connection
+**                  blocks information
+**
+** Returns          none
+**
+*******************************************************************************/
+void pan_dump_status (void)
+{
+#if (defined (PAN_SUPPORTS_DEBUG_DUMP) && PAN_SUPPORTS_DEBUG_DUMP == TRUE)
+    UINT16          i;
+    char            buff[200];
+    tPAN_CONN      *p_pcb;
+
+    PAN_TRACE_DEBUG3 ("PAN role %x, active role %d, num_conns %d",
+        pan_cb.role, pan_cb.active_role, pan_cb.num_conns);
+
+    for (i = 0, p_pcb = pan_cb.pcb; i < MAX_PAN_CONNS; i++, p_pcb++)
+    {
+        sprintf (buff, "%d state %d, handle %d, src 0x%x, dst 0x%x, BD %x.%x.%x.%x.%x.%x",
+            i, p_pcb->con_state, p_pcb->handle, p_pcb->src_uuid, p_pcb->dst_uuid,
+            p_pcb->rem_bda[0], p_pcb->rem_bda[1], p_pcb->rem_bda[2],
+            p_pcb->rem_bda[3], p_pcb->rem_bda[4], p_pcb->rem_bda[5]);
+
+        PAN_TRACE_DEBUG0 (buff);
+    }
+#endif
+}
+
+
+
diff --git a/stack/rfcomm/port_api.c b/stack/rfcomm/port_api.c
new file mode 100644
index 0000000..617d31b
--- /dev/null
+++ b/stack/rfcomm/port_api.c
@@ -0,0 +1,1730 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains the Serial Port API code
+ *
+ ******************************************************************************/
+
+#include <string.h>
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "port_int.h"
+#include "btm_int.h"
+#include "btm_api.h"
+#include "rfc_int.h"
+#include "l2c_api.h"
+#include "sdp_api.h"
+
+/* duration of break in 200ms units */
+#define PORT_BREAK_DURATION     1
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+/*******************************************************************************
+**
+** Function         RFCOMM_CreateConnection
+**
+** Description      RFCOMM_CreateConnection function is used from the application
+**                  to establish serial port connection to the peer device,
+**                  or allow RFCOMM to accept a connection from the peer
+**                  application.
+**
+** Parameters:      scn          - Service Channel Number as registered with
+**                                 the SDP (server) or obtained using SDP from
+**                                 the peer device (client).
+**                  is_server    - TRUE if requesting application is a server
+**                  mtu          - Maximum frame size the application can accept
+**                  bd_addr      - BD_ADDR of the peer (client)
+**                  mask         - specifies events to be enabled.  A value
+**                                 of zero disables all events.
+**                  p_handle     - OUT pointer to the handle.
+**                  p_mgmt_cb    - pointer to callback function to receive
+**                                 connection up/down events.
+** Notes:
+**
+** Server can call this function with the same scn parameter multiple times if
+** it is ready to accept multiple simulteneous connections.
+**
+** DLCI for the connection is (scn * 2 + 1) if client originates connection on
+** existing none initiator multiplexer channel.  Otherwise it is (scn * 2).
+** For the server DLCI can be changed later if client will be calling it using
+** (scn * 2 + 1) dlci.
+**
+*******************************************************************************/
+int RFCOMM_CreateConnection (UINT16 uuid, UINT8 scn, BOOLEAN is_server,
+                             UINT16 mtu, BD_ADDR bd_addr, UINT16 *p_handle,
+                             tPORT_CALLBACK *p_mgmt_cb)
+{
+    tPORT      *p_port;
+    int        i;
+    UINT8      dlci;
+    tRFC_MCB   *p_mcb = port_find_mcb (bd_addr);
+    UINT16     rfcomm_mtu;
+
+    RFCOMM_TRACE_API3 ("RFCOMM_CreateConnection() called SCN: %d is_server:%d mtu:%d",
+                       scn, is_server, mtu);
+    RFCOMM_TRACE_API6 ("RFCOMM_CreateConnection()  BDA: %02x-%02x-%02x-%02x-%02x-%02x",
+                       bd_addr[0], bd_addr[1], bd_addr[2], bd_addr[3], bd_addr[4], bd_addr[5]);
+
+    *p_handle = 0;
+
+    if (( scn == 0 )||(scn >= PORT_MAX_RFC_PORTS ))
+    {
+        /* Server Channel Number(SCN) should be in range 1...30 */
+        RFCOMM_TRACE_ERROR0 ("RFCOMM_CreateConnection - invalid SCN");
+        return (PORT_INVALID_SCN);
+    }
+
+    /* For client that originate connection on the existing none initiator */
+    /* multiplexer channel DLCI should be odd */
+    if (p_mcb && !p_mcb->is_initiator && !is_server)
+        dlci = (scn << 1) + 1;
+    else
+        dlci = (scn << 1);
+
+    /* For the server side always allocate a new port.  On the client side */
+    /* do not allow the same (dlci, bd_addr) to be opened twice by application */
+    if (!is_server && ((p_port = port_find_port (dlci, bd_addr)) != NULL))
+    {
+        /* if existing port is also a client port */
+        if (p_port->is_server == FALSE)
+        {
+            RFCOMM_TRACE_ERROR3 ("RFCOMM_CreateConnection - already opened state:%d, RFC state:%d, MCB state:%d",
+                p_port->state, p_port->rfc.state, p_port->rfc.p_mcb ? p_port->rfc.p_mcb->state : 0);
+            return (PORT_ALREADY_OPENED);
+        }
+    }
+
+    if ((p_port = port_allocate_port (dlci, bd_addr)) == NULL)
+    {
+        RFCOMM_TRACE_WARNING0 ("RFCOMM_CreateConnection - no resources");
+        return (PORT_NO_RESOURCES);
+    }
+
+    p_port->default_signal_state = (PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON);
+
+    switch (uuid)
+    {
+    case UUID_PROTOCOL_OBEX:
+        p_port->default_signal_state = PORT_OBEX_DEFAULT_SIGNAL_STATE;
+        break;
+    case UUID_SERVCLASS_SERIAL_PORT:
+        p_port->default_signal_state = PORT_SPP_DEFAULT_SIGNAL_STATE;
+        break;
+    case UUID_SERVCLASS_LAN_ACCESS_USING_PPP:
+        p_port->default_signal_state = PORT_PPP_DEFAULT_SIGNAL_STATE;
+        break;
+    case UUID_SERVCLASS_DIALUP_NETWORKING:
+    case UUID_SERVCLASS_FAX:
+        p_port->default_signal_state = PORT_DUN_DEFAULT_SIGNAL_STATE;
+        break;
+    }
+
+    RFCOMM_TRACE_EVENT2 ("RFCOMM_CreateConnection dlci:%d signal state:0x%x", dlci, p_port->default_signal_state);
+
+    *p_handle = p_port->inx;
+
+    p_port->state        = PORT_STATE_OPENING;
+    p_port->uuid         = uuid;
+    p_port->is_server    = is_server;
+    p_port->scn          = scn;
+    p_port->ev_mask      = 0;
+
+    /* If the MTU is not specified (0), keep MTU decision until the
+     * PN frame has to be send
+     * at that time connection should be established and we
+     * will know for sure our prefered MTU
+     */
+
+    rfcomm_mtu = L2CAP_MTU_SIZE - RFCOMM_DATA_OVERHEAD;
+
+    if (mtu)
+        p_port->mtu      = (mtu < rfcomm_mtu) ? mtu : rfcomm_mtu;
+    else
+        p_port->mtu      = rfcomm_mtu;
+
+    /* server doesn't need to release port when closing */
+    if( is_server )
+    {
+        p_port->keep_port_handle = TRUE;
+
+        /* keep mtu that user asked, p_port->mtu could be updated during param negotiation */
+        p_port->keep_mtu         = p_port->mtu;
+    }
+
+    p_port->local_ctrl.modem_signal = p_port->default_signal_state;
+    p_port->local_ctrl.fc           = FALSE;
+
+    p_port->p_mgmt_callback = p_mgmt_cb;
+
+    for (i = 0; i < BD_ADDR_LEN; i++)
+        p_port->bd_addr[i] = bd_addr[i];
+
+    /* If this is not initiator of the connection need to just wait */
+    if (p_port->is_server)
+    {
+        return (PORT_SUCCESS);
+    }
+
+    /* Open will be continued after security checks are passed */
+    return port_open_continue (p_port);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_RemoveConnection
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**
+*******************************************************************************/
+int RFCOMM_RemoveConnection (UINT16 handle)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API1 ("RFCOMM_RemoveConnection() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_RemoveConnection() BAD handle:%d", handle);
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        RFCOMM_TRACE_EVENT1 ("RFCOMM_RemoveConnection() Not opened:%d", handle);
+        return (PORT_SUCCESS);
+    }
+
+    p_port->state = PORT_STATE_CLOSING;
+
+    port_start_close (p_port);
+
+    return (PORT_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         RFCOMM_RemoveServer
+**
+** Description      This function is called to close the server port.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**
+*******************************************************************************/
+int RFCOMM_RemoveServer (UINT16 handle)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API1 ("RFCOMM_RemoveServer() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_RemoveServer() BAD handle:%d", handle);
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    /* Do not report any events to the client any more. */
+    p_port->p_mgmt_callback = NULL;
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        RFCOMM_TRACE_EVENT1 ("RFCOMM_RemoveServer() Not opened:%d", handle);
+        return (PORT_SUCCESS);
+    }
+
+    /* this port will be deallocated after closing */
+    p_port->keep_port_handle = FALSE;
+    p_port->state = PORT_STATE_CLOSING;
+
+    port_start_close (p_port);
+
+    return (PORT_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         PORT_SetEventCallback
+**
+** Description      This function is called to provide an address of the
+**                  function which will be called when one of the events
+**                  specified in the mask occures.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_callback - address of the callback function which should
+**                               be called from the RFCOMM when an event
+**                               specified in the mask occures.
+**
+**
+*******************************************************************************/
+int PORT_SetEventCallback (UINT16 port_handle, tPORT_CALLBACK *p_port_cb)
+{
+    tPORT  *p_port;
+
+    /* Check if handle is valid to avoid crashing */
+    if ((port_handle == 0) || (port_handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[port_handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    RFCOMM_TRACE_API1 ("PORT_SetEventCallback() handle:%d", port_handle);
+
+    p_port->p_callback = p_port_cb;
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_SetDataCallback
+**
+** Description      This function is when a data packet is received
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_callback - address of the callback function which should
+**                               be called from the RFCOMM when data packet
+**                               is received.
+**
+**
+*******************************************************************************/
+int PORT_SetDataCallback (UINT16 port_handle, tPORT_DATA_CALLBACK *p_port_cb)
+{
+    tPORT  *p_port;
+
+    RFCOMM_TRACE_API2 ("PORT_SetDataCallback() handle:%d cb 0x%x", port_handle, p_port_cb);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((port_handle == 0) || (port_handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[port_handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    p_port->p_data_callback = p_port_cb;
+
+    return (PORT_SUCCESS);
+}
+/*******************************************************************************
+**
+** Function         PORT_SetCODataCallback
+**
+** Description      This function is when a data packet is received
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_callback - address of the callback function which should
+**                               be called from the RFCOMM when data packet
+**                               is received.
+**
+**
+*******************************************************************************/
+int PORT_SetDataCOCallback (UINT16 port_handle, tPORT_DATA_CO_CALLBACK *p_port_cb)
+{
+    tPORT  *p_port;
+
+    RFCOMM_TRACE_API2 ("PORT_SetDataCOCallback() handle:%d cb 0x%x", port_handle, p_port_cb);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((port_handle == 0) || (port_handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[port_handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    p_port->p_data_co_callback = p_port_cb;
+
+    return (PORT_SUCCESS);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         PORT_SetEventMask
+**
+** Description      This function is called to close the specified connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  mask   - Bitmask of the events the host is interested in
+**
+*******************************************************************************/
+int PORT_SetEventMask (UINT16 port_handle, UINT32 mask)
+{
+    tPORT  *p_port;
+
+    RFCOMM_TRACE_API2 ("PORT_SetEventMask() handle:%d mask:0x%x", port_handle, mask);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((port_handle == 0) || (port_handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[port_handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    p_port->ev_mask = mask;
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_CheckConnection
+**
+** Description      This function returns PORT_SUCCESS if connection referenced
+**                  by handle is up and running
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  bd_addr    - OUT bd_addr of the peer
+**                  p_lcid     - OUT L2CAP's LCID
+**
+*******************************************************************************/
+int PORT_CheckConnection (UINT16 handle, BD_ADDR bd_addr, UINT16 *p_lcid)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API1 ("PORT_CheckConnection() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (!p_port->rfc.p_mcb
+     || !p_port->rfc.p_mcb->peer_ready
+     || (p_port->rfc.state != RFC_STATE_OPENED))
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    memcpy (bd_addr, p_port->rfc.p_mcb->bd_addr, BD_ADDR_LEN);
+    if (p_lcid)
+        *p_lcid = p_port->rfc.p_mcb->lcid;
+
+    return (PORT_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         PORT_IsOpening
+**
+** Description      This function returns TRUE if there is any RFCOMM connection
+**                  opening in process.
+**
+** Parameters:      TRUE if any connection opening is found
+**                  bd_addr    - bd_addr of the peer
+**
+*******************************************************************************/
+BOOLEAN PORT_IsOpening (BD_ADDR bd_addr)
+{
+    UINT8   xx, yy;
+    tRFC_MCB *p_mcb = NULL;
+    tPORT  *p_port;
+    BOOLEAN found_port;
+
+    /* Check for any rfc_mcb which is in the middle of opening. */
+    for (xx = 0; xx < MAX_BD_CONNECTIONS; xx++)
+    {
+        if ((rfc_cb.port.rfc_mcb[xx].state > RFC_MX_STATE_IDLE) &&
+            (rfc_cb.port.rfc_mcb[xx].state < RFC_MX_STATE_CONNECTED))
+        {
+            memcpy (bd_addr, rfc_cb.port.rfc_mcb[xx].bd_addr, BD_ADDR_LEN);
+            return TRUE;
+        }
+
+        if (rfc_cb.port.rfc_mcb[xx].state == RFC_MX_STATE_CONNECTED)
+        {
+            found_port = FALSE;
+            p_mcb = &rfc_cb.port.rfc_mcb[xx];
+            p_port = &rfc_cb.port.port[0];
+
+            for (yy = 0; yy < MAX_RFC_PORTS; yy++, p_port++)
+            {
+                if (p_port->rfc.p_mcb == p_mcb)
+                {
+                    found_port = TRUE;
+                    break;
+                }
+            }
+
+            if ((!found_port) ||
+                (found_port && (p_port->rfc.state < RFC_STATE_OPENED)))
+            {
+                /* Port is not established yet. */
+                memcpy (bd_addr, rfc_cb.port.rfc_mcb[xx].bd_addr, BD_ADDR_LEN);
+                return TRUE;
+            }
+        }
+    }
+
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         PORT_SetState
+**
+** Description      This function configures connection according to the
+**                  specifications in the tPORT_STATE structure.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_settings - Pointer to a tPORT_STATE structure containing
+**                               configuration information for the connection.
+**
+**
+*******************************************************************************/
+int PORT_SetState (UINT16 handle, tPORT_STATE *p_settings)
+{
+    tPORT      *p_port;
+    UINT8       baud_rate;
+
+    RFCOMM_TRACE_API1 ("PORT_SetState() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    RFCOMM_TRACE_API2 ("PORT_SetState() handle:%d FC_TYPE:0x%x", handle,
+                       p_settings->fc_type);
+
+    baud_rate = p_port->user_port_pars.baud_rate;
+    p_port->user_port_pars = *p_settings;
+
+    /* for now we've been asked to pass only baud rate */
+    if (baud_rate != p_settings->baud_rate)
+    {
+        port_start_par_neg (p_port);
+    }
+    return (PORT_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         PORT_GetRxQueueCnt
+**
+** Description      This function return number of buffers on the rx queue.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_rx_queue_count - Pointer to return queue count in.
+**
+*******************************************************************************/
+int PORT_GetRxQueueCnt (UINT16 handle, UINT16 *p_rx_queue_count)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API1 ("PORT_GetRxQueueCnt() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    *p_rx_queue_count = p_port->rx.queue_size;
+
+	RFCOMM_TRACE_API2 ("PORT_GetRxQueueCnt() p_rx_queue_count:%d, p_port->rx.queue.count = %d",
+		                                     *p_rx_queue_count, p_port->rx.queue_size);
+
+    return (PORT_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         PORT_GetState
+**
+** Description      This function is called to fill tPORT_STATE structure
+**                  with the curremt control settings for the port
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_settings - Pointer to a tPORT_STATE structure in which
+**                               configuration information is returned.
+**
+*******************************************************************************/
+int PORT_GetState (UINT16 handle, tPORT_STATE *p_settings)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API1 ("PORT_GetState() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    *p_settings = p_port->user_port_pars;
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_Control
+**
+** Description      This function directs a specified connection to pass control
+**                  control information to the peer device.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  signal     = specify the function to be passed
+**
+*******************************************************************************/
+int PORT_Control (UINT16 handle, UINT8 signal)
+{
+    tPORT      *p_port;
+    UINT8      old_modem_signal;
+
+    RFCOMM_TRACE_API2 ("PORT_Control() handle:%d signal:0x%x", handle, signal);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    old_modem_signal = p_port->local_ctrl.modem_signal;
+    p_port->local_ctrl.break_signal = 0;
+
+    switch (signal)
+    {
+    case PORT_SET_CTSRTS:
+        p_port->local_ctrl.modem_signal |= PORT_CTSRTS_ON;
+        break;
+
+    case PORT_CLR_CTSRTS:
+        p_port->local_ctrl.modem_signal &= ~PORT_CTSRTS_ON;
+        break;
+
+    case PORT_SET_DTRDSR:
+        p_port->local_ctrl.modem_signal |= PORT_DTRDSR_ON;
+        break;
+
+    case PORT_CLR_DTRDSR:
+        p_port->local_ctrl.modem_signal &= ~PORT_DTRDSR_ON;
+        break;
+
+    case PORT_SET_RI:
+        p_port->local_ctrl.modem_signal |= PORT_RING_ON;
+        break;
+
+    case PORT_CLR_RI:
+        p_port->local_ctrl.modem_signal &= ~PORT_RING_ON;
+        break;
+
+    case PORT_SET_DCD:
+        p_port->local_ctrl.modem_signal |= PORT_DCD_ON;
+        break;
+
+    case PORT_CLR_DCD:
+        p_port->local_ctrl.modem_signal &= ~PORT_DCD_ON;
+        break;
+    }
+
+    if (signal == PORT_BREAK)
+        p_port->local_ctrl.break_signal = PORT_BREAK_DURATION;
+    else if (p_port->local_ctrl.modem_signal == old_modem_signal)
+        return (PORT_SUCCESS);
+
+    port_start_control (p_port);
+
+    RFCOMM_TRACE_EVENT4 ("PORT_Control DTR_DSR : %d, RTS_CTS : %d, RI : %d, DCD : %d",
+        ((p_port->local_ctrl.modem_signal & MODEM_SIGNAL_DTRDSR) ? 1 : 0),
+        ((p_port->local_ctrl.modem_signal & MODEM_SIGNAL_RTSCTS) ? 1 : 0),
+        ((p_port->local_ctrl.modem_signal & MODEM_SIGNAL_RI) ? 1 : 0),
+        ((p_port->local_ctrl.modem_signal & MODEM_SIGNAL_DCD) ? 1 : 0));
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_FlowControl
+**
+** Description      This function directs a specified connection to pass
+**                  flow control message to the peer device.  Enable flag passed
+**                  shows if port can accept more data.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  enable     - enables data flow
+**
+*******************************************************************************/
+int PORT_FlowControl (UINT16 handle, BOOLEAN enable)
+{
+    tPORT      *p_port;
+    BOOLEAN    old_fc;
+    UINT32     events;
+
+    RFCOMM_TRACE_API2 ("PORT_FlowControl() handle:%d enable: %d", handle, enable);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (!p_port->rfc.p_mcb)
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    p_port->rx.user_fc = !enable;
+
+    if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
+    {
+        if (!p_port->rx.user_fc)
+        {
+            port_flow_control_peer(p_port, TRUE, 0);
+        }
+    }
+    else
+    {
+        old_fc = p_port->local_ctrl.fc;
+
+        /* FC is set if user is set or peer is set */
+        p_port->local_ctrl.fc = (p_port->rx.user_fc | p_port->rx.peer_fc);
+
+        if (p_port->local_ctrl.fc != old_fc)
+            port_start_control (p_port);
+    }
+
+    /* Need to take care of the case when we could not deliver events */
+    /* to the application because we were flow controlled */
+    if (enable && (p_port->rx.queue_size != 0))
+    {
+        events = PORT_EV_RXCHAR;
+        if (p_port->rx_flag_ev_pending)
+        {
+            p_port->rx_flag_ev_pending = FALSE;
+            events |= PORT_EV_RXFLAG;
+        }
+
+        events &= p_port->ev_mask;
+        if (p_port->p_callback && events)
+        {
+            p_port->p_callback (events, p_port->inx);
+        }
+    }
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_GetModemStatus
+**
+** Description      This function retrieves modem control signals.  Normally
+**                  application will call this function after a callback
+**                  function is called with notification that one of signals
+**                  has been changed.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_signal   - specify the pointer to control signals info
+**
+*******************************************************************************/
+int PORT_GetModemStatus (UINT16 handle, UINT8 *p_signal)
+{
+    tPORT      *p_port;
+
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    *p_signal = p_port->peer_ctrl.modem_signal;
+
+    RFCOMM_TRACE_API2 ("PORT_GetModemStatus() handle:%d signal:%x", handle, *p_signal);
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ClearError
+**
+** Description      This function retreives information about a communications
+**                  error and reports current status of a connection.  The
+**                  function should be called when an error occures to clear
+**                  the connection error flag and to enable additional read
+**                  and write operations.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_errors   - pointer of the variable to receive error codes
+**                  p_status   - pointer to the tPORT_STATUS structur to receive
+**                               connection status
+**
+*******************************************************************************/
+int PORT_ClearError (UINT16 handle, UINT16 *p_errors, tPORT_STATUS *p_status)
+{
+    tPORT  *p_port;
+
+    RFCOMM_TRACE_API1 ("PORT_ClearError() handle:%d", handle);
+
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    *p_errors = p_port->line_status;
+
+    /* This is the only call to clear error status.  We can not clear */
+    /* connection failed status.  To clean it port should be closed and reopened */
+    p_port->line_status = (p_port->line_status & LINE_STATUS_FAILED);
+
+    PORT_GetQueueStatus (handle, p_status);
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_SendError
+**
+** Description      This function send a communications error to the peer device
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  errors     - receive error codes
+**
+*******************************************************************************/
+int PORT_SendError (UINT16 handle, UINT8 errors)
+{
+    tPORT      *p_port;
+
+    RFCOMM_TRACE_API2 ("PORT_SendError() handle:%d errors:0x%x", handle, errors);
+
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (!p_port->rfc.p_mcb)
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    RFCOMM_LineStatusReq (p_port->rfc.p_mcb, p_port->dlci, errors);
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_GetQueueStatus
+**
+** Description      This function reports current status of a connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_status   - pointer to the tPORT_STATUS structur to receive
+**                               connection status
+**
+*******************************************************************************/
+int PORT_GetQueueStatus (UINT16 handle, tPORT_STATUS *p_status)
+{
+    tPORT      *p_port;
+
+    /* RFCOMM_TRACE_API1 ("PORT_GetQueueStatus() handle:%d", handle); */
+
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    p_status->in_queue_size  = (UINT16) p_port->rx.queue_size;
+    p_status->out_queue_size = (UINT16) p_port->tx.queue_size;
+
+    p_status->mtu_size = (UINT16) p_port->peer_mtu;
+
+    p_status->flags = 0;
+
+    if (!(p_port->peer_ctrl.modem_signal & PORT_CTSRTS_ON))
+        p_status->flags |= PORT_FLAG_CTS_HOLD;
+
+    if (!(p_port->peer_ctrl.modem_signal & PORT_DTRDSR_ON))
+        p_status->flags |= PORT_FLAG_DSR_HOLD;
+
+    if (!(p_port->peer_ctrl.modem_signal & PORT_DCD_ON))
+        p_status->flags |= PORT_FLAG_RLSD_HOLD;
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_Purge
+**
+** Description      This function discards all the data from the output or
+**                  input queues of the specified connection.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  purge_flags - specify the action to take.
+**
+*******************************************************************************/
+int PORT_Purge (UINT16 handle, UINT8 purge_flags)
+{
+    tPORT      *p_port;
+    BT_HDR     *p_buf;
+    UINT16      count;
+    UINT32     events;
+
+    RFCOMM_TRACE_API2 ("PORT_Purge() handle:%d flags:0x%x", handle, purge_flags);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (purge_flags & PORT_PURGE_RXCLEAR)
+    {
+        PORT_SCHEDULE_LOCK;  /* to prevent missing credit */
+
+        count = p_port->rx.queue.count;
+
+        while ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->rx.queue)) != NULL)
+            GKI_freebuf (p_buf);
+
+        p_port->rx.queue_size = 0;
+
+        PORT_SCHEDULE_UNLOCK;
+
+        /* If we flowed controlled peer based on rx_queue size enable data again */
+        if (count)
+            port_flow_control_peer (p_port, TRUE, count);
+    }
+
+    if (purge_flags & PORT_PURGE_TXCLEAR)
+    {
+        PORT_SCHEDULE_LOCK;  /* to prevent tx.queue_size from being negative */
+
+        while ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->tx.queue)) != NULL)
+            GKI_freebuf (p_buf);
+
+        p_port->tx.queue_size = 0;
+
+        PORT_SCHEDULE_UNLOCK;
+
+        events = PORT_EV_TXEMPTY;
+
+        events |= port_flow_control_user (p_port);
+
+        events &= p_port->ev_mask;
+
+        if ((p_port->p_callback != NULL) && events)
+            (p_port->p_callback)(events, p_port->inx);
+    }
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ReadData
+**
+** Description      Normally not GKI aware application will call this function
+**                  after receiving PORT_EV_RXCHAR event.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_data      - Data area
+**                  max_len     - Byte count requested
+**                  p_len       - Byte count received
+**
+*******************************************************************************/
+int PORT_ReadData (UINT16 handle, char *p_data, UINT16 max_len, UINT16 *p_len)
+{
+    tPORT      *p_port;
+    BT_HDR     *p_buf;
+    UINT16      count;
+
+    RFCOMM_TRACE_API2 ("PORT_ReadData() handle:%d max_len:%d", handle, max_len);
+
+    /* Initialize this in case of an error */
+    *p_len = 0;
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    p_buf = (BT_HDR *)GKI_getfirst (&p_port->rx.queue);
+    if (!p_buf)
+        return (PORT_SUCCESS);
+
+    count = 0;
+
+    while (max_len && p_buf)
+    {
+        if (p_buf->len > max_len)
+        {
+            memcpy (p_data, (UINT8 *)(p_buf + 1) + p_buf->offset, max_len);
+            p_buf->offset += max_len;
+            p_buf->len    -= max_len;
+
+            *p_len += max_len;
+
+            PORT_SCHEDULE_LOCK;
+
+            p_port->rx.queue_size -= max_len;
+
+            PORT_SCHEDULE_UNLOCK;
+
+            break;
+        }
+        else
+        {
+            memcpy (p_data, (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len);
+
+            *p_len  += p_buf->len;
+            max_len -= p_buf->len;
+
+            PORT_SCHEDULE_LOCK;
+
+            p_port->rx.queue_size -= p_buf->len;
+
+            if (max_len)
+            {
+                p_data  += p_buf->len;
+                p_buf = (BT_HDR *)GKI_getnext (p_buf);
+            }
+
+            GKI_freebuf (GKI_dequeue (&p_port->rx.queue));
+
+            PORT_SCHEDULE_UNLOCK;
+
+            count++;
+        }
+    }
+
+    if (*p_len == 1)
+    {
+        RFCOMM_TRACE_EVENT3 ("PORT_ReadData queue:%d returned:%d %x", p_port->rx.queue_size, *p_len, (p_data[0]));
+    }
+    else
+    {
+        RFCOMM_TRACE_EVENT2 ("PORT_ReadData queue:%d returned:%d", p_port->rx.queue_size, *p_len);
+    }
+
+    /* If rfcomm suspended traffic from the peer based on the rx_queue_size */
+    /* check if it can be resumed now */
+    port_flow_control_peer (p_port, TRUE, count);
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_Read
+**
+** Description      Normally application will call this function after receiving
+**                  PORT_EV_RXCHAR event.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  pp_buf      - pointer to address of buffer with data,
+**
+*******************************************************************************/
+int PORT_Read (UINT16 handle, BT_HDR **pp_buf)
+{
+    tPORT      *p_port;
+    BT_HDR     *p_buf;
+
+    RFCOMM_TRACE_API1 ("PORT_Read() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        return (PORT_LINE_ERR);
+    }
+
+    PORT_SCHEDULE_LOCK;
+
+    p_buf = (BT_HDR *)GKI_dequeue (&p_port->rx.queue);
+    if (p_buf)
+    {
+        p_port->rx.queue_size -= p_buf->len;
+
+        PORT_SCHEDULE_UNLOCK;
+
+        /* If rfcomm suspended traffic from the peer based on the rx_queue_size */
+        /* check if it can be resumed now */
+        port_flow_control_peer (p_port, TRUE, 1);
+    }
+    else
+    {
+        PORT_SCHEDULE_UNLOCK;
+    }
+
+    *pp_buf = p_buf;
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_write
+**
+** Description      This function when a data packet is received from the apper
+**                  layer task.
+**
+** Parameters:      p_port     - pointer to address of port control block
+**                  p_buf      - pointer to address of buffer with data,
+**
+*******************************************************************************/
+static int port_write (tPORT *p_port, BT_HDR *p_buf)
+{
+    /* We should not allow to write data in to server port when connection is not opened */
+    if (p_port->is_server && (p_port->rfc.state != RFC_STATE_OPENED))
+    {
+        GKI_freebuf (p_buf);
+        return (PORT_CLOSED);
+    }
+
+    /* Keep the data in pending queue if peer does not allow data, or */
+    /* Peer is not ready or Port is not yet opened or initial port control */
+    /* command has not been sent */
+    if (p_port->tx.peer_fc
+     || !p_port->rfc.p_mcb
+     || !p_port->rfc.p_mcb->peer_ready
+     || (p_port->rfc.state != RFC_STATE_OPENED)
+     || ((p_port->port_ctrl & (PORT_CTRL_REQ_SENT | PORT_CTRL_IND_RECEIVED)) !=
+                              (PORT_CTRL_REQ_SENT | PORT_CTRL_IND_RECEIVED)))
+    {
+        if ((p_port->tx.queue_size  > PORT_TX_CRITICAL_WM)
+         || (p_port->tx.queue.count > PORT_TX_BUF_CRITICAL_WM))
+        {
+            RFCOMM_TRACE_WARNING1 ("PORT_Write: Queue size: %d",
+                                   p_port->tx.queue_size);
+
+            GKI_freebuf (p_buf);
+
+            if ((p_port->p_callback != NULL) && (p_port->ev_mask & PORT_EV_ERR))
+                  p_port->p_callback (PORT_EV_ERR, p_port->inx);
+
+            return (PORT_TX_FULL);
+        }
+
+        RFCOMM_TRACE_EVENT4 ("PORT_Write : Data is enqued. flow disabled %d peer_ready %d state %d ctrl_state %x",
+                             p_port->tx.peer_fc,
+                             (p_port->rfc.p_mcb && p_port->rfc.p_mcb->peer_ready),
+                             p_port->rfc.state,
+                             p_port->port_ctrl);
+
+        GKI_enqueue (&p_port->tx.queue, p_buf);
+        p_port->tx.queue_size += p_buf->len;
+
+        return (PORT_CMD_PENDING);
+    }
+    else
+    {
+        RFCOMM_TRACE_EVENT0 ("PORT_Write : Data is being sent");
+
+        RFCOMM_DataReq (p_port->rfc.p_mcb, p_port->dlci, p_buf);
+        return (PORT_SUCCESS);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         PORT_Write
+**
+** Description      This function when a data packet is received from the apper
+**                  layer task.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  pp_buf      - pointer to address of buffer with data,
+**
+*******************************************************************************/
+int PORT_Write (UINT16 handle, BT_HDR *p_buf)
+{
+    tPORT  *p_port;
+    UINT32 event = 0;
+    int    rc;
+
+    RFCOMM_TRACE_API1 ("PORT_Write() handle:%d", handle);
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        GKI_freebuf (p_buf);
+        return (PORT_BAD_HANDLE);
+    }
+
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        GKI_freebuf (p_buf);
+        return (PORT_NOT_OPENED);
+    }
+
+    if (p_port->line_status)
+    {
+        RFCOMM_TRACE_WARNING1 ("PORT_Write: Data dropped line_status:0x%x",
+                               p_port->line_status);
+        GKI_freebuf (p_buf);
+        return (PORT_LINE_ERR);
+    }
+
+    rc = port_write (p_port, p_buf);
+    event |= port_flow_control_user (p_port);
+
+    switch (rc)
+    {
+    case PORT_TX_FULL:
+        event |= PORT_EV_ERR;
+        break;
+
+    case PORT_SUCCESS:
+        event |= (PORT_EV_TXCHAR | PORT_EV_TXEMPTY);
+        break;
+    }
+    /* Mask out all events that are not of interest to user */
+    event &= p_port->ev_mask;
+
+    /* Send event to the application */
+    if (p_port->p_callback && event)
+        (p_port->p_callback)(event, p_port->inx);
+
+    return (PORT_SUCCESS);
+}
+/*******************************************************************************
+**
+** Function         PORT_WriteDataCO
+**
+** Description      Normally not GKI aware application will call this function
+**                  to send data to the port by callout functions
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  fd         - socket fd
+**                  p_len      - Byte count returned
+**
+*******************************************************************************/
+int PORT_WriteDataCO (UINT16 handle, int* p_len)
+{
+
+    tPORT      *p_port;
+    BT_HDR     *p_buf;
+    UINT32     event = 0;
+    int        rc = 0;
+    UINT16     length;
+
+    RFCOMM_TRACE_API1 ("PORT_WriteDataCO() handle:%d", handle);
+    int written;
+    *p_len = 0;
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        RFCOMM_TRACE_WARNING1 ("PORT_WriteDataByFd() no port state:%d", p_port->state);
+        return (PORT_NOT_OPENED);
+    }
+
+    if (!p_port->peer_mtu)
+    {
+        RFCOMM_TRACE_ERROR1 ("PORT_WriteDataByFd() peer_mtu:%d", p_port->peer_mtu);
+        return (PORT_UNKNOWN_ERROR);
+    }
+    int available = 0;
+    //if(ioctl(fd, FIONREAD, &available) < 0)
+    if(p_port->p_data_co_callback(handle, (UINT8*)&available, sizeof(available),
+                                DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE) == FALSE)
+    {
+        RFCOMM_TRACE_ERROR1("p_data_co_callback DATA_CO_CALLBACK_TYPE_INCOMING_SIZE failed, available:%d", available);
+        return (PORT_UNKNOWN_ERROR);
+    }
+    /* Length for each buffer is the smaller of GKI buffer, peer MTU, or max_len */
+    length = RFCOMM_DATA_POOL_BUF_SIZE -
+            (UINT16)(sizeof(BT_HDR) + L2CAP_MIN_OFFSET + RFCOMM_DATA_OVERHEAD);
+
+    /* If there are buffers scheduled for transmission check if requested */
+    /* data fits into the end of the queue */
+    PORT_SCHEDULE_LOCK;
+
+    if (((p_buf = (BT_HDR *)p_port->tx.queue.p_last) != NULL)
+     && (((int)p_buf->len + available) <= (int)p_port->peer_mtu)
+     && (((int)p_buf->len + available) <= (int)length))
+    {
+        //if(recv(fd, (UINT8 *)(p_buf + 1) + p_buf->offset + p_buf->len, available, 0) != available)
+        if(p_port->p_data_co_callback(handle, (UINT8 *)(p_buf + 1) + p_buf->offset + p_buf->len,
+                                    available, DATA_CO_CALLBACK_TYPE_OUTGOING) == FALSE)
+
+        {
+            error("p_data_co_callback DATA_CO_CALLBACK_TYPE_OUTGOING failed, available:%d", available);
+            return (PORT_UNKNOWN_ERROR);
+        }
+        //memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset + p_buf->len, p_data, max_len);
+        p_port->tx.queue_size += (UINT16)available;
+
+        *p_len = available;
+        p_buf->len += (UINT16)available;
+
+        PORT_SCHEDULE_UNLOCK;
+
+        return (PORT_SUCCESS);
+    }
+
+    PORT_SCHEDULE_UNLOCK;
+
+    //int max_read = length < p_port->peer_mtu ? length : p_port->peer_mtu;
+
+    //max_read = available < max_read ? available : max_read;
+
+    while (available)
+    {
+        /* if we're over buffer high water mark, we're done */
+        if ((p_port->tx.queue_size  > PORT_TX_HIGH_WM)
+         || (p_port->tx.queue.count > PORT_TX_BUF_HIGH_WM))
+            break;
+
+        /* continue with rfcomm data write */
+        p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_DATA_POOL_ID);
+        if (!p_buf)
+            break;
+
+        p_buf->offset         = L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET;
+        p_buf->layer_specific = handle;
+
+        if (p_port->peer_mtu < length)
+            length = p_port->peer_mtu;
+        if (available < (int)length)
+            length = (UINT16)available;
+        p_buf->len = length;
+        p_buf->event          = BT_EVT_TO_BTU_SP_DATA;
+
+        //memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset, p_data, length);
+        //if(recv(fd, (UINT8 *)(p_buf + 1) + p_buf->offset, (int)length, 0) != (int)length)
+        if(p_port->p_data_co_callback(handle, (UINT8 *)(p_buf + 1) + p_buf->offset, length,
+                                      DATA_CO_CALLBACK_TYPE_OUTGOING) == FALSE)
+        {
+            error("p_data_co_callback DATA_CO_CALLBACK_TYPE_OUTGOING failed, length:%d", length);
+            return (PORT_UNKNOWN_ERROR);
+        }
+
+
+        RFCOMM_TRACE_EVENT1 ("PORT_WriteData %d bytes", length);
+
+        rc = port_write (p_port, p_buf);
+
+        /* If queue went below the threashold need to send flow control */
+        event |= port_flow_control_user (p_port);
+
+        if (rc == PORT_SUCCESS)
+            event |= PORT_EV_TXCHAR;
+
+        if ((rc != PORT_SUCCESS) && (rc != PORT_CMD_PENDING))
+            break;
+
+        *p_len  += length;
+        available -= (int)length;
+    }
+    if (!available && (rc != PORT_CMD_PENDING) && (rc != PORT_TX_QUEUE_DISABLED))
+        event |= PORT_EV_TXEMPTY;
+
+    /* Mask out all events that are not of interest to user */
+    event &= p_port->ev_mask;
+
+    /* Send event to the application */
+    if (p_port->p_callback && event)
+        (p_port->p_callback)(event, p_port->inx);
+
+    return (PORT_SUCCESS);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         PORT_WriteData
+**
+** Description      Normally not GKI aware application will call this function
+**                  to send data to the port.
+**
+** Parameters:      handle     - Handle returned in the RFCOMM_CreateConnection
+**                  p_data      - Data area
+**                  max_len     - Byte count requested
+**                  p_len       - Byte count received
+**
+*******************************************************************************/
+int PORT_WriteData (UINT16 handle, char *p_data, UINT16 max_len, UINT16 *p_len)
+{
+    tPORT      *p_port;
+    BT_HDR     *p_buf;
+    UINT32     event = 0;
+    int        rc = 0;
+    UINT16     length;
+
+    RFCOMM_TRACE_API1 ("PORT_WriteData() max_len:%d", max_len);
+
+    *p_len = 0;
+
+    /* Check if handle is valid to avoid crashing */
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        RFCOMM_TRACE_WARNING1 ("PORT_WriteData() no port state:%d", p_port->state);
+        return (PORT_NOT_OPENED);
+    }
+
+    if (!max_len || !p_port->peer_mtu)
+    {
+        RFCOMM_TRACE_ERROR1 ("PORT_WriteData() peer_mtu:%d", p_port->peer_mtu);
+        return (PORT_UNKNOWN_ERROR);
+    }
+
+    /* Length for each buffer is the smaller of GKI buffer, peer MTU, or max_len */
+    length = RFCOMM_DATA_POOL_BUF_SIZE -
+            (UINT16)(sizeof(BT_HDR) + L2CAP_MIN_OFFSET + RFCOMM_DATA_OVERHEAD);
+
+    /* If there are buffers scheduled for transmission check if requested */
+    /* data fits into the end of the queue */
+    PORT_SCHEDULE_LOCK;
+
+    if (((p_buf = (BT_HDR *)p_port->tx.queue.p_last) != NULL)
+     && ((p_buf->len + max_len) <= p_port->peer_mtu)
+     && ((p_buf->len + max_len) <= length))
+    {
+        memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset + p_buf->len, p_data, max_len);
+        p_port->tx.queue_size += max_len;
+
+        *p_len = max_len;
+        p_buf->len += max_len;
+
+        PORT_SCHEDULE_UNLOCK;
+
+        return (PORT_SUCCESS);
+    }
+
+    PORT_SCHEDULE_UNLOCK;
+
+    while (max_len)
+    {
+        /* if we're over buffer high water mark, we're done */
+        if ((p_port->tx.queue_size  > PORT_TX_HIGH_WM)
+         || (p_port->tx.queue.count > PORT_TX_BUF_HIGH_WM))
+            break;
+
+        /* continue with rfcomm data write */
+        p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_DATA_POOL_ID);
+        if (!p_buf)
+            break;
+
+        p_buf->offset         = L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET;
+        p_buf->layer_specific = handle;
+
+        if (p_port->peer_mtu < length)
+            length = p_port->peer_mtu;
+        if (max_len < length)
+            length = max_len;
+        p_buf->len = length;
+        p_buf->event          = BT_EVT_TO_BTU_SP_DATA;
+
+        memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset, p_data, length);
+
+        RFCOMM_TRACE_EVENT1 ("PORT_WriteData %d bytes", length);
+
+        rc = port_write (p_port, p_buf);
+
+        /* If queue went below the threashold need to send flow control */
+        event |= port_flow_control_user (p_port);
+
+        if (rc == PORT_SUCCESS)
+            event |= PORT_EV_TXCHAR;
+
+        if ((rc != PORT_SUCCESS) && (rc != PORT_CMD_PENDING))
+            break;
+
+        *p_len  += length;
+        max_len -= length;
+        p_data  += length;
+
+    }
+    if (!max_len && (rc != PORT_CMD_PENDING) && (rc != PORT_TX_QUEUE_DISABLED))
+        event |= PORT_EV_TXEMPTY;
+
+    /* Mask out all events that are not of interest to user */
+    event &= p_port->ev_mask;
+
+    /* Send event to the application */
+    if (p_port->p_callback && event)
+        (p_port->p_callback)(event, p_port->inx);
+
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_Test
+**
+** Description      Application can call this function to send RFCOMM Test frame
+**
+** Parameters:      handle      - Handle returned in the RFCOMM_CreateConnection
+**                  p_data      - Data area
+**                  max_len     - Byte count requested
+**
+*******************************************************************************/
+int PORT_Test (UINT16 handle, UINT8 *p_data, UINT16 len)
+{
+    BT_HDR   *p_buf;
+    tPORT    *p_port;
+
+    RFCOMM_TRACE_API1 ("PORT_Test() len:%d", len);
+
+    if ((handle == 0) || (handle > MAX_RFC_PORTS))
+    {
+        return (PORT_BAD_HANDLE);
+    }
+    p_port = &rfc_cb.port.port[handle - 1];
+
+    if (!p_port->in_use || (p_port->state == PORT_STATE_CLOSED))
+    {
+        return (PORT_NOT_OPENED);
+    }
+
+    if (len > ((p_port->mtu == 0) ? RFCOMM_DEFAULT_MTU : p_port->mtu))
+    {
+        return (PORT_UNKNOWN_ERROR);
+    }
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) != NULL)
+    {
+
+        p_buf->offset  = L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET + 2;
+        p_buf->len = len;
+
+        memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset, p_data, p_buf->len);
+
+        rfc_send_test (p_port->rfc.p_mcb, TRUE, p_buf);
+        return (PORT_SUCCESS);
+    }
+    else
+    {
+        return (PORT_NO_MEM);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         RFCOMM_Init
+**
+** Description      This function is called to initialize RFCOMM layer
+**
+*******************************************************************************/
+void RFCOMM_Init (void)
+{
+    memset (&rfc_cb, 0, sizeof (tRFC_CB));  /* Init RFCOMM control block */
+
+    rfc_cb.rfc.last_mux = MAX_BD_CONNECTIONS;
+
+#if defined(RFCOMM_INITIAL_TRACE_LEVEL)
+    rfc_cb.trace_level = RFCOMM_INITIAL_TRACE_LEVEL;
+#else
+    rfc_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+
+    rfcomm_l2cap_if_init ();
+}
+
+/*******************************************************************************
+**
+** Function         PORT_SetTraceLevel
+**
+** Description      This function sets the trace level for RFCOMM. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 PORT_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        rfc_cb.trace_level = new_level;
+
+    return (rfc_cb.trace_level);
+}
+
diff --git a/stack/rfcomm/port_int.h b/stack/rfcomm/port_int.h
new file mode 100644
index 0000000..2313ace
--- /dev/null
+++ b/stack/rfcomm/port_int.h
@@ -0,0 +1,252 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains definitions internal to the PORT unit
+ *
+ *****************************************************************************/
+
+#ifndef PORT_INT_H
+#define PORT_INT_H
+
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+
+/* Local events passed when application event is sent from the api to PORT */
+/* ???*/
+#define PORT_EVENT_OPEN         (1  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_CONTROL      (2  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_SET_STATE    (3  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_SET_CALLBACK (5  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_WRITE        (6  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_PURGE        (7  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_SEND_ERROR   (8  | BT_EVT_TO_BTU_SP_EVT)
+#define PORT_EVENT_FLOW_CONTROL (9  | BT_EVT_TO_BTU_SP_EVT)
+
+/*
+** Flow control configuration values for the mux
+*/
+#define PORT_FC_UNDEFINED       0   /* mux flow control mechanism not defined yet */
+#define PORT_FC_TS710           1   /* use TS 07.10 flow control  */
+#define PORT_FC_CREDIT          2   /* use RFCOMM credit based flow control */
+
+/*
+** Define Port Data Transfere control block
+*/
+typedef struct
+{
+    BUFFER_Q queue;         /* Queue of buffers waiting to be sent */
+    BOOLEAN  peer_fc;       /* TRUE if flow control is set based on peer's request */
+    BOOLEAN  user_fc;       /* TRUE if flow control is set based on user's request  */
+    UINT32   queue_size;    /* Number of data bytes in the queue */
+    tPORT_CALLBACK *p_callback;  /* Address of the callback function */
+} tPORT_DATA;
+
+/*
+** Port control structure used to pass modem info
+*/
+typedef struct
+{
+#define MODEM_SIGNAL_DTRDSR        0x01
+#define MODEM_SIGNAL_RTSCTS        0x02
+#define MODEM_SIGNAL_RI            0x04
+#define MODEM_SIGNAL_DCD           0x08
+
+    UINT8   modem_signal;       /* [DTR/DSR | RTS/CTS | RI | DCD ] */
+
+    UINT8   break_signal;       /* 0-3 s in steps of 200 ms */
+
+    UINT8   discard_buffers;    /* 0 - do not discard, 1 - discard */
+
+#define RFCOMM_CTRL_BREAK_ASAP      0
+#define RFCOMM_CTRL_BREAK_IN_SEQ    1
+
+    UINT8   break_signal_seq;   /* as soon as possible | in sequence (default) */
+
+    BOOLEAN fc;                 /* TRUE when the device is unable to accept frames */
+} tPORT_CTRL;
+
+
+/*
+** RFCOMM multiplexer Control Block
+*/
+typedef struct
+{
+    TIMER_LIST_ENT tle;       /* Timer list entry */
+    BUFFER_Q  cmd_q;          /* Queue for command messages on this mux */
+    UINT8     port_inx[RFCOMM_MAX_DLCI + 1];  /* Array for quick access to  */
+                                              /* tPORT based on dlci        */
+    BD_ADDR   bd_addr;        /* BD ADDR of the peer if initiator */
+    UINT16    lcid;           /* Local cid used for this channel */
+    UINT16    peer_l2cap_mtu; /* Max frame that can be sent to peer L2CAP */
+    UINT8     state;          /* Current multiplexer channel state */
+    UINT8     is_initiator;   /* TRUE if this side sends SABME (dlci=0) */
+    BOOLEAN   local_cfg_sent;
+    BOOLEAN   peer_cfg_rcvd;
+    BOOLEAN   restart_required; /* TRUE if has to restart channel after disc */
+    BOOLEAN   peer_ready;      /* True if other side can accept frames */
+    UINT8     flow;            /* flow control mechanism for this mux */
+    BOOLEAN   l2cap_congested; /* TRUE if L2CAP is congested */
+    BOOLEAN   is_disc_initiator; /* TRUE if initiated disc of port */
+    UINT16    pending_lcid;    /* store LCID for incoming connection while connecting */
+    UINT8     pending_id;      /* store l2cap ID for incoming connection while connecting */
+} tRFC_MCB;
+
+
+/*
+** RFCOMM Port Connection Control Block
+*/
+struct t_rfc_port
+{
+#define RFC_PORT_STATE_IDLE          0
+#define RFC_PORT_STATE_WAIT_START    1
+#define RFC_PORT_STATE_OPENING       2
+#define RFC_PORT_STATE_OPENED        3
+#define RFC_PORT_STATE_CLOSING       4
+
+    UINT8     state;          /* Current state of the connection */
+
+#define RFC_RSP_PN                  0x01
+#define RFC_RSP_RPN_REPLY           0x02
+#define RFC_RSP_RPN                 0x04
+#define RFC_RSP_MSC                 0x08
+#define RFC_RSP_RLS                 0x10
+
+    UINT8    expected_rsp;
+
+    tRFC_MCB *p_mcb;
+
+    TIMER_LIST_ENT tle;       /* Timer list entry */
+};
+typedef struct t_rfc_port tRFC_PORT;
+
+
+/*
+** Define control block containing information about PORT connection
+*/
+struct t_port_info
+{
+    UINT8   inx;            /* Index of this control block in the port_info array */
+    BOOLEAN in_use;         /* True when structure is allocated */
+
+#define PORT_STATE_CLOSED   0
+#define PORT_STATE_OPENING  1
+#define PORT_STATE_OPENED   2
+#define PORT_STATE_CLOSING  3
+
+    UINT8   state;          /* State of the application */
+
+    UINT8   scn;            /* Service channel number */
+    UINT16  uuid;           /* Service UUID */
+
+    BD_ADDR bd_addr;        /* BD ADDR of the device for the multiplexer channel */
+    BOOLEAN is_server;      /* TRUE if the server application */
+    UINT8   dlci;           /* DLCI of the connection */
+
+    UINT8   error;          /* Last error detected */
+
+    UINT8   line_status;    /* Line status as reported by peer */
+
+    UINT8   default_signal_state; /* Initial signal state depending on uuid */
+
+    UINT16  mtu;            /* Max MTU that port can receive */
+    UINT16  peer_mtu;       /* Max MTU that port can send */
+
+    tPORT_DATA tx;          /* Control block for data from app to peer */
+    tPORT_DATA rx;          /* Control block for data from peer to app */
+
+    tPORT_STATE user_port_pars;  /* Port parameters for user connection */
+    tPORT_STATE peer_port_pars;  /* Port parameters for user connection */
+
+    tPORT_CTRL  local_ctrl;
+    tPORT_CTRL  peer_ctrl;
+
+#define PORT_CTRL_REQ_SENT          0x01
+#define PORT_CTRL_REQ_CONFIRMED     0x02
+#define PORT_CTRL_IND_RECEIVED      0x04
+#define PORT_CTRL_IND_RESPONDED     0x08
+
+    UINT8       port_ctrl;                  /* Modem Status Command  */
+
+    BOOLEAN     rx_flag_ev_pending;         /* RXFLAG Character is received */
+
+    tRFC_PORT   rfc;                        /* RFCOMM port control block */
+
+    UINT32      ev_mask;                    /* Event mask for the callback */
+    tPORT_CALLBACK      *p_callback;        /* Pointer to users callback function */
+    tPORT_CALLBACK      *p_mgmt_callback;   /* Callback function to receive connection up/down */
+    tPORT_DATA_CALLBACK *p_data_callback;   /* Callback function to receive data indications */
+    tPORT_DATA_CO_CALLBACK *p_data_co_callback;   /* Callback function with callouts and flowctrl */
+    UINT16      credit_tx;                  /* Flow control credits for tx path */
+    UINT16      credit_rx;                  /* Flow control credits for rx path, this is */
+                                            /* number of buffers peer is allowed to sent */
+    UINT16      credit_rx_max;              /* Max number of credits we will allow this guy to sent */
+    UINT16      credit_rx_low;              /* Number of credits when we send credit update */
+    UINT16      rx_buf_critical;            /* port receive queue critical watermark level */
+    BOOLEAN     keep_port_handle;           /* TRUE if port is not deallocated when closing */
+                                            /* it is set to TRUE for server when allocating port */
+    UINT16      keep_mtu;                   /* Max MTU that port can receive by server */
+};
+typedef struct t_port_info tPORT;
+
+
+/* Define the PORT/RFCOMM control structure
+*/
+typedef struct
+{
+    tPORT        port[MAX_RFC_PORTS];            /* Port info pool */
+    tRFC_MCB     rfc_mcb[MAX_BD_CONNECTIONS];    /* RFCOMM bd_connections pool */
+} tPORT_CB;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+** Functions provided by the port_utils.c
+*/
+extern tPORT    *port_allocate_port (UINT8 dlci, BD_ADDR bd_addr);
+extern void     port_set_defaults (tPORT *p_port);
+extern void     port_select_mtu (tPORT *p_port);
+extern void     port_release_port (tPORT *p_port);
+extern tPORT    *port_find_mcb_dlci_port (tRFC_MCB *p_mcb, UINT8 dlci);
+extern tRFC_MCB *port_find_mcb (BD_ADDR bd_addr);
+extern tPORT    *port_find_dlci_port (UINT8 dlci);
+extern tPORT    *port_find_port (UINT8 dlci, BD_ADDR bd_addr);
+extern UINT32   port_get_signal_changes (tPORT *p_port, UINT8 old_signals, UINT8 signal);
+extern UINT32   port_flow_control_user (tPORT *p_port);
+extern void     port_flow_control_peer(tPORT *p_port, BOOLEAN enable, UINT16 count);
+
+/*
+** Functions provided by the port_rfc.c
+*/
+extern int  port_open_continue (tPORT *p_port);
+extern void port_start_port_open (tPORT *p_port);
+extern void port_start_par_neg (tPORT *p_port);
+extern void port_start_control (tPORT *p_port);
+extern void port_start_close (tPORT *p_port);
+extern void port_rfc_closed (tPORT *p_port, UINT8 res);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/stack/rfcomm/port_rfc.c b/stack/rfcomm/port_rfc.c
new file mode 100644
index 0000000..8980330
--- /dev/null
+++ b/stack/rfcomm/port_rfc.c
@@ -0,0 +1,1112 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This module contains functions for port emulation entity and RFCOMM
+ *  communications
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "btm_int.h"
+#include "btm_api.h"
+#include "port_int.h"
+#include "rfc_int.h"
+
+/*
+** Local function definitions
+*/
+UINT32 port_rfc_send_tx_data (tPORT *p_port);
+void   port_rfc_closed (tPORT *p_port, UINT8 res);
+void   port_get_credits (tPORT *p_port, UINT8 k);
+
+
+/*******************************************************************************
+**
+** Function         port_open_continue
+**
+** Description      This function is called after security manager completes
+**                  required security checks.
+**
+** Returns          void
+**
+*******************************************************************************/
+int port_open_continue (tPORT *p_port)
+{
+    tRFC_MCB *p_mcb;
+
+    RFCOMM_TRACE_EVENT0 ("port_open_continue");
+
+    /* Check if multiplexer channel has already been established */
+    if ((p_mcb = rfc_alloc_multiplexer_channel (p_port->bd_addr, TRUE)) == NULL)
+    {
+        RFCOMM_TRACE_WARNING0 ("port_open_continue no mx channel");
+        port_release_port (p_port);
+        return (PORT_NO_RESOURCES);
+    }
+
+    p_port->rfc.p_mcb = p_mcb;
+
+    p_mcb->port_inx[p_port->dlci] = p_port->inx;
+
+    /* Connection is up and we know local and remote features, select MTU */
+    port_select_mtu (p_port);
+
+    if (p_mcb->state == RFC_MX_STATE_CONNECTED)
+    {
+        RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu);
+    }
+    else if ((p_mcb->state == RFC_MX_STATE_IDLE)
+           ||(p_mcb->state == RFC_MX_STATE_DISC_WAIT_UA))
+    {
+        /* In RFC_MX_STATE_IDLE state, MX state machine will create connection           */
+        /* In RFC_MX_STATE_DISC_WAIT_UA state, MX state machine will recreate connection */
+        /*    after disconnecting is completed                                           */
+        RFCOMM_StartReq (p_mcb);
+    }
+    else
+    {
+        /* MX state machine ignores RFC_MX_EVENT_START_REQ in these states */
+        /* When it enters RFC_MX_STATE_CONNECTED, it will check any openning ports */
+        RFCOMM_TRACE_DEBUG1 ("port_open_continue: mx state(%d) mx channel is openning", p_mcb->state);
+    }
+    return (PORT_SUCCESS);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_start_control
+**
+** Description      This function is called in the BTU_TASK context to
+**                  send control information
+**
+** Returns          void
+**
+*******************************************************************************/
+void port_start_control (tPORT *p_port)
+{
+    tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
+
+    if (p_mcb == NULL)
+        return;
+
+    RFCOMM_ControlReq (p_mcb, p_port->dlci, &p_port->local_ctrl);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_start_par_neg
+**
+** Description      This function is called in the BTU_TASK context to
+**                  send configuration information
+**
+** Returns          void
+**
+*******************************************************************************/
+void port_start_par_neg (tPORT *p_port)
+{
+    tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
+
+    if (p_mcb == NULL)
+        return;
+
+    RFCOMM_PortNegReq (p_mcb, p_port->dlci, &p_port->user_port_pars);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_start_close
+**
+** Description      This function is called in the BTU_TASK context to
+**                  release DLC
+**
+** Returns          void
+**
+*******************************************************************************/
+void port_start_close (tPORT *p_port)
+{
+    tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
+    UINT8  old_signals;
+    UINT32 events = 0;
+
+    /* At first indicate to the user that signals on the connection were dropped */
+    p_port->line_status |= LINE_STATUS_FAILED;
+    old_signals = p_port->peer_ctrl.modem_signal;
+
+    p_port->peer_ctrl.modem_signal &= ~(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON);
+
+    events |= port_get_signal_changes (p_port, old_signals, p_port->peer_ctrl.modem_signal);
+
+    if(p_port->ev_mask & PORT_EV_CONNECT_ERR)
+        events |= PORT_EV_CONNECT_ERR;
+
+    if(p_port->ev_mask & PORT_EV_ERR)
+        events |= PORT_EV_ERR;
+
+    if ((p_port->p_callback != NULL) && events)
+        p_port->p_callback (events, p_port->inx);
+
+
+    /* Check if RFCOMM side has been closed while the message was queued */
+    if ((p_mcb == NULL) || (p_port->rfc.state == RFC_STATE_CLOSED))
+    {
+        /* Call management callback function before calling port_release_port() to clear tPort */
+        if (p_port->p_mgmt_callback)
+            p_port->p_mgmt_callback (PORT_CLOSED, p_port->inx);
+
+        port_release_port (p_port);
+    }
+    else
+    {
+        RFCOMM_DlcReleaseReq (p_mcb, p_port->dlci);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_StartCnf
+**
+** Description      This function is called from the RFCOMM layer when
+**                  establishing of the multiplexer channel is completed.
+**                  Continue establishing of the connection for all ports that
+**                  are in the OPENING state
+**
+*******************************************************************************/
+void PORT_StartCnf (tRFC_MCB *p_mcb, UINT16 result)
+{
+    tPORT   *p_port;
+    int     i;
+    BOOLEAN no_ports_up = TRUE;
+
+    RFCOMM_TRACE_EVENT1 ("PORT_StartCnf result:%d", result);
+
+    p_port = &rfc_cb.port.port[0];
+    for (i = 0; i < MAX_RFC_PORTS; i++, p_port++)
+    {
+        if (p_port->rfc.p_mcb == p_mcb)
+        {
+            no_ports_up = FALSE;
+
+            if (result == RFCOMM_SUCCESS)
+                RFCOMM_ParNegReq (p_mcb, p_port->dlci, p_port->mtu);
+            else
+            {
+                RFCOMM_TRACE_WARNING1 ("PORT_StartCnf failed result:%d", result);
+
+                /* Warning: result is also set to 4 when l2cap connection
+                   fails due to l2cap connect cnf (no_resources) */
+                if( result == HCI_ERR_PAGE_TIMEOUT )
+                    p_port->error = PORT_PAGE_TIMEOUT;
+                else
+                    p_port->error = PORT_START_FAILED;
+
+                rfc_release_multiplexer_channel (p_mcb);
+                p_port->rfc.p_mcb = NULL;
+
+                /* Send event to the application */
+                if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECT_ERR))
+                    (p_port->p_callback)(PORT_EV_CONNECT_ERR, p_port->inx);
+
+                if (p_port->p_mgmt_callback)
+                    p_port->p_mgmt_callback (PORT_START_FAILED, p_port->inx);
+
+                port_release_port (p_port);
+            }
+        }
+    }
+
+    /* There can be a situation when after starting connection, user closes the */
+    /* port, we can catch it here to close multiplexor channel */
+    if (no_ports_up)
+    {
+        rfc_check_mcb_active (p_mcb);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_StartInd
+**
+** Description      This function is called from the RFCOMM layer when
+**                  some peer device wants to establish a multiplexer
+**                  connection.  Check if there are any ports open with this
+**                  or not assigned multiplexer.
+**
+*******************************************************************************/
+void PORT_StartInd (tRFC_MCB *p_mcb)
+{
+    tPORT *p_port;
+    int   i;
+
+    RFCOMM_TRACE_EVENT0 ("PORT_StartInd");
+
+    p_port = &rfc_cb.port.port[0];
+    for (i = 0; i < MAX_RFC_PORTS; i++, p_port++)
+    {
+        if ((p_port->rfc.p_mcb == NULL)
+         || (p_port->rfc.p_mcb == p_mcb))
+        {
+            RFCOMM_StartRsp (p_mcb, RFCOMM_SUCCESS);
+            return;
+        }
+    }
+    RFCOMM_StartRsp (p_mcb, RFCOMM_ERROR);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ParNegInd
+**
+** Description      This function is called from the RFCOMM layer to change
+**                  DLCI parameters (currently only MTU is negotiated).
+**                  If can not find the port do not accept the request.
+**                  Otherwise save the MTU size supported by the peer.
+**
+*******************************************************************************/
+void PORT_ParNegInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT8 our_cl;
+    UINT8 our_k;
+
+    RFCOMM_TRACE_EVENT2 ("PORT_ParNegInd dlci:%d mtu:%d", dlci, mtu);
+
+    if (!p_port)
+    {
+        /* This can be a first request for this port */
+        p_port = port_find_dlci_port (dlci);
+        if (!p_port)
+        {
+            /* If the port cannot be opened, send a DM.  Per Errata 1205 */
+            rfc_send_dm(p_mcb, dlci, FALSE);
+            /* check if this is the last port open, some headsets have
+            problem, they don't disconnect if we send DM */
+            rfc_check_mcb_active( p_mcb );
+            RFCOMM_TRACE_EVENT0( "PORT_ParNegInd: port not found" );
+            return;
+        }
+        p_mcb->port_inx[dlci] = p_port->inx;
+    }
+
+    memcpy (p_port->bd_addr, p_mcb->bd_addr, BD_ADDR_LEN);
+
+    /* Connection is up and we know local and remote features, select MTU */
+    port_select_mtu (p_port);
+
+    p_port->rfc.p_mcb   = p_mcb;
+    p_port->mtu         = (p_port->mtu < mtu) ? p_port->mtu : mtu;
+    p_port->peer_mtu    = p_port->mtu;
+
+    /* Negotiate the flow control mechanism.  If flow control mechanism for */
+    /* mux has not been set yet, set it now.  If either we or peer wants TS 07.10, */
+    /* use that.  Otherwise both must want credit based, so use that. If flow is */
+    /* already defined for this mux, we respond with that value. */
+    if (p_mcb->flow == PORT_FC_UNDEFINED)
+    {
+        if ((PORT_FC_DEFAULT == PORT_FC_TS710) || (cl == RFCOMM_PN_CONV_LAYER_TYPE_1))
+        {
+            p_mcb->flow = PORT_FC_TS710;
+        }
+        else
+        {
+            p_mcb->flow = PORT_FC_CREDIT;
+        }
+    }
+
+    /* Regardless of our flow control mechanism, if the PN cl is zero, we must */
+    /* respond with zero.  "A responding implementation must set this field to 14 */
+    /* if (and only if) the PN request was 15."  This could happen if a PN is sent */
+    /* after the DLCI is already established-- the PN in that case must have cl = 0. */
+    /* See RFCOMM spec 5.5.3 */
+    if (cl == RFCOMM_PN_CONV_LAYER_TYPE_1)
+    {
+        our_cl = RFCOMM_PN_CONV_LAYER_TYPE_1;
+        our_k = 0;
+    }
+    else if (p_mcb->flow == PORT_FC_CREDIT)
+    {
+        /* get credits */
+        port_get_credits (p_port, k);
+
+        /* Set convergence layer and number of credits (k) */
+        our_cl = RFCOMM_PN_CONV_LAYER_CBFC_R;
+        our_k = (p_port->credit_rx_max < RFCOMM_K_MAX) ? p_port->credit_rx_max : RFCOMM_K_MAX;
+        p_port->credit_rx = our_k;
+    }
+    else
+    {
+        /* must not be using credit based flow control; use TS 7.10 */
+        our_cl = RFCOMM_PN_CONV_LAYER_TYPE_1;
+        our_k = 0;
+    }
+    RFCOMM_ParNegRsp (p_mcb, dlci, p_port->mtu, our_cl, our_k);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ParNegCnf
+**
+** Description      This function is called from the RFCOMM layer to change
+**                  DLCI parameters (currently only MTU is negotiated).
+**                  Save the MTU size supported by the peer.
+**                  If the confirmation is received during the port opening
+**                  procedure send EstablishRequest to continue.
+**
+*******************************************************************************/
+void PORT_ParNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k)
+{
+    tPORT   *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT4 ("PORT_ParNegCnf dlci:%d mtu:%d cl: %d k: %d", dlci, mtu, cl, k);
+
+    if (!p_port)
+        return;
+
+    /* Flow control mechanism not set yet.  Negotiate flow control mechanism. */
+    if (p_mcb->flow == PORT_FC_UNDEFINED)
+    {
+        /* Our stack is configured for TS07.10 and they responded with credit-based. */
+        /* This is illegal-- negotiation fails. */
+        if ((PORT_FC_DEFAULT == PORT_FC_TS710) && (cl == RFCOMM_PN_CONV_LAYER_CBFC_R))
+        {
+            rfc_send_disc (p_mcb, p_port->dlci);
+            rfc_port_closed (p_port);
+            return;
+        }
+        /* Our stack is configured for credit-based and they responded with credit-based. */
+        else if (cl == RFCOMM_PN_CONV_LAYER_CBFC_R)
+        {
+            p_mcb->flow = PORT_FC_CREDIT;
+        }
+        /* They responded with any other value.  Treat this as negotiation to TS07.10. */
+        else
+        {
+            p_mcb->flow = PORT_FC_TS710;
+        }
+    }
+    /* If mux flow control mechanism set, we honor that setting regardless of */
+    /* the CL value in their response.  This allows us to gracefully accept any */
+    /* illegal PN negotiation scenarios. */
+
+    p_port->mtu         = (p_port->mtu < mtu) ? p_port->mtu : mtu;
+    p_port->peer_mtu    = p_port->mtu;
+
+    if (p_mcb->flow == PORT_FC_CREDIT)
+    {
+        port_get_credits (p_port, k);
+    }
+
+    if (p_port->state == PORT_STATE_OPENING)
+        RFCOMM_DlcEstablishReq (p_mcb, p_port->dlci, p_port->mtu);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_DlcEstablishInd
+**
+** Description      This function is called from the RFCOMM layer when peer
+**                  device wants to establish a new DLC.  If this is not the
+**                  first message in the establishment procedure port_handle
+**                  has a handle to the port control block otherwise the control
+**                  block should be found based on the muliplexer channel and
+**                  dlci.  The block should be allocated allocated before
+**                  meaning that application already made open.
+**
+*******************************************************************************/
+void PORT_DlcEstablishInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT2 ("PORT_DlcEstablishInd dlci:%d mtu:%d", dlci, mtu);
+
+    if (!p_port)
+    {
+        /* This can be a first request for this port */
+        p_port = port_find_dlci_port (dlci);
+        if (!p_port)
+        {
+            RFCOMM_DlcEstablishRsp (p_mcb, dlci, 0, RFCOMM_ERROR);
+            return;
+        }
+        p_mcb->port_inx[dlci] = p_port->inx;
+    }
+
+    /* If L2CAP's mtu less then RFCOMM's take it */
+    if (mtu && (mtu < p_port->peer_mtu))
+        p_port->peer_mtu = mtu;
+
+    /* If there was an inactivity timer running for MCB stop it */
+    rfc_timer_stop (p_mcb);
+
+    RFCOMM_DlcEstablishRsp (p_mcb, dlci, p_port->mtu, RFCOMM_SUCCESS);
+
+    /* This is the server side.  If application wants to know when connection */
+    /* is established, thats the place */
+    if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECTED))
+        (p_port->p_callback)(PORT_EV_CONNECTED, p_port->inx);
+
+    if (p_port->p_mgmt_callback)
+        p_port->p_mgmt_callback (PORT_SUCCESS, p_port->inx);
+
+    p_port->state = PORT_STATE_OPENED;
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_DlcEstablishCnf
+**
+** Description      This function is called from the RFCOMM layer when peer
+**                  acknowledges establish procedure (SABME/UA).  Send reply
+**                  to the user and set state to OPENED if result was
+**                  successfull.
+**
+*******************************************************************************/
+void PORT_DlcEstablishCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT3 ("PORT_DlcEstablishCnf dlci:%d mtu:%d result:%d", dlci, mtu, result);
+
+    if (!p_port)
+        return;
+
+    if (result != RFCOMM_SUCCESS)
+    {
+        p_port->error = PORT_START_FAILED;
+        port_rfc_closed (p_port, PORT_START_FAILED);
+        return;
+    }
+
+    /* If L2CAP's mtu less then RFCOMM's take it */
+    if (mtu && (mtu < p_port->peer_mtu))
+        p_port->peer_mtu = mtu;
+
+    /* If there was an inactivity timer running for MCB stop it */
+    rfc_timer_stop (p_mcb);
+
+    if (p_port->p_callback && (p_port->ev_mask & PORT_EV_CONNECTED))
+        (p_port->p_callback)(PORT_EV_CONNECTED, p_port->inx);
+
+    if (p_port->p_mgmt_callback)
+        p_port->p_mgmt_callback (PORT_SUCCESS, p_port->inx);
+
+    p_port->state = PORT_STATE_OPENED;
+
+    /* RPN is required only if we want to tell DTE how the port should be opened */
+    if ((p_port->uuid == UUID_SERVCLASS_DIALUP_NETWORKING)
+     || (p_port->uuid == UUID_SERVCLASS_FAX))
+        RFCOMM_PortNegReq (p_port->rfc.p_mcb, p_port->dlci, NULL);
+    else
+        RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_PortNegInd
+**
+** Description      This function is called from the RFCOMM layer when peer
+**                  device wants to set parameters of the port.  As per the spec
+**                  this message has to be sent before the first data packet
+**                  and can be sent before establish.  The block should be
+**                  allocated before meaning that application already made open.
+**
+*******************************************************************************/
+void PORT_PortNegInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars,
+                      UINT16 param_mask)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT0 ("PORT_PortNegInd");
+
+    if (!p_port)
+    {
+        /* This can be a first request for this port */
+        p_port = port_find_dlci_port (dlci);
+        if (!p_port)
+        {
+            RFCOMM_PortNegRsp (p_mcb, dlci, p_pars, 0);
+            return;
+        }
+        p_mcb->port_inx[dlci] = p_port->inx;
+    }
+
+    /* Check if the flow control is acceptable on local side */
+    p_port->peer_port_pars = *p_pars;
+    RFCOMM_PortNegRsp (p_mcb, dlci, p_pars, param_mask);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_PortNegCnf
+**
+** Description      This function is called from the RFCOMM layer to change
+**                  state for the port.  Propagate change to the user.
+**
+*******************************************************************************/
+void PORT_PortNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, UINT16 result)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT0 ("PORT_PortNegCnf");
+
+    if (!p_port)
+    {
+        RFCOMM_TRACE_WARNING0 ("PORT_PortNegCnf no port");
+        return;
+    }
+    /* Port negotiation failed. Drop the connection */
+    if (result != RFCOMM_SUCCESS)
+    {
+        p_port->error = PORT_PORT_NEG_FAILED;
+
+        RFCOMM_DlcReleaseReq (p_mcb, p_port->dlci);
+
+        port_rfc_closed (p_port, PORT_PORT_NEG_FAILED);
+        return;
+    }
+
+    if (!(p_port->port_ctrl & PORT_CTRL_REQ_SENT))
+    {
+        RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl);
+    }
+    else
+    {
+        RFCOMM_TRACE_WARNING0 ("PORT_PortNegCnf Control Already sent");
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ControlInd
+**
+** Description      This function is called from the RFCOMM layer on the modem
+**                  signal change.  Propagate change to the user.
+**
+*******************************************************************************/
+void PORT_ControlInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT32 event;
+    UINT8  old_signals;
+
+    RFCOMM_TRACE_EVENT0 ("PORT_ControlInd");
+
+    if (!p_port)
+        return;
+
+    old_signals = p_port->peer_ctrl.modem_signal;
+
+    event = port_get_signal_changes (p_port, old_signals, p_pars->modem_signal);
+
+    p_port->peer_ctrl = *p_pars;
+
+    if (!(p_port->port_ctrl & PORT_CTRL_REQ_SENT))
+        RFCOMM_ControlReq (p_port->rfc.p_mcb, p_port->dlci, &p_port->local_ctrl);
+    else
+    {
+        /* If this is the first time we received control RFCOMM is connected */
+        if (!(p_port->port_ctrl & PORT_CTRL_IND_RECEIVED))
+        {
+            event |= (PORT_EV_CONNECTED & p_port->ev_mask);
+        }
+
+        if (p_port->port_ctrl & PORT_CTRL_REQ_CONFIRMED)
+        {
+            event |= port_rfc_send_tx_data(p_port);
+        }
+    }
+
+    p_port->port_ctrl |= (PORT_CTRL_IND_RECEIVED | PORT_CTRL_IND_RESPONDED);
+
+    if (p_pars->break_signal)
+        event |= (PORT_EV_BREAK & p_port->ev_mask);
+
+    /* execute call back function only if the application is registered for events */
+    if (event && p_port->p_callback)
+        (p_port->p_callback)(event, p_port->inx);
+
+    RFCOMM_TRACE_EVENT4 ("PORT_ControlInd DTR_DSR : %d, RTS_CTS : %d, RI : %d, DCD : %d",
+        ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_DTRDSR) ? 1 : 0),
+        ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_RTSCTS) ? 1 : 0),
+        ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_RI) ? 1 : 0),
+        ((p_port->peer_ctrl.modem_signal & MODEM_SIGNAL_DCD) ? 1 : 0));
+
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_ControlCnf
+**
+** Description      This function is called from the RFCOMM layer when
+**                  peer acknowleges change of the modem signals.
+**
+*******************************************************************************/
+void PORT_ControlCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT32 event = 0;
+
+    RFCOMM_TRACE_EVENT0 ("PORT_ControlCnf");
+
+    if (!p_port)
+        return;
+
+    if (!(p_port->port_ctrl & PORT_CTRL_REQ_CONFIRMED))
+    {
+        p_port->port_ctrl |= PORT_CTRL_REQ_CONFIRMED;
+
+        if (p_port->port_ctrl & PORT_CTRL_IND_RECEIVED)
+            event = (p_port->ev_mask & PORT_EV_CONNECTED);
+    }
+
+    if (p_port->port_ctrl & PORT_CTRL_IND_RECEIVED)
+    {
+        event |= port_rfc_send_tx_data(p_port);
+    }
+
+    /* execute call back function only if the application is registered for events */
+    if (event && p_port->p_callback)
+        (p_port->p_callback)(event, p_port->inx);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_LineStatusInd
+**
+** Description      This function is called from the RFCOMM layer when
+**                  peer indicates change in the line status
+**
+*******************************************************************************/
+void PORT_LineStatusInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 line_status)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT32 event = 0;
+
+    RFCOMM_TRACE_EVENT0 ("PORT_LineStatusInd");
+
+    if (!p_port)
+        return;
+
+    p_port->line_status |= line_status;
+
+    if (line_status & PORT_ERR_OVERRUN)
+        event |= PORT_EV_OVERRUN;
+
+    if (line_status & PORT_ERR_BREAK)
+        event |= PORT_EV_BREAK;
+
+    if (line_status & ~(PORT_ERR_OVERRUN | PORT_ERR_BREAK))
+        event |= PORT_EV_ERR;
+
+    if ((p_port->p_callback != NULL) && (p_port->ev_mask & event))
+          p_port->p_callback ((p_port->ev_mask & event), p_port->inx);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_DlcReleaseInd
+**
+** Description      This function is called from the RFCOMM layer when
+**                  DLC connection is released.
+**
+*******************************************************************************/
+void PORT_DlcReleaseInd (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    RFCOMM_TRACE_EVENT0 ("PORT_DlcReleaseInd");
+
+    if (!p_port)
+        return;
+
+    port_rfc_closed (p_port, PORT_CLOSED);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_CloseInd
+**
+** Description      This function is called from the RFCOMM layer when
+**                  multiplexer connection is released.
+**
+*******************************************************************************/
+void PORT_CloseInd (tRFC_MCB *p_mcb)
+{
+    tPORT  *p_port;
+    int    i;
+
+    RFCOMM_TRACE_EVENT0 ("PORT_CloseInd");
+
+    p_port = &rfc_cb.port.port[0];
+    for (i = 0; i < MAX_RFC_PORTS; i++, p_port++)
+    {
+        if (p_port->rfc.p_mcb == p_mcb)
+        {
+            port_rfc_closed (p_port, PORT_PEER_CONNECTION_FAILED);
+        }
+    }
+    rfc_release_multiplexer_channel (p_mcb);
+}
+
+/*******************************************************************************
+**
+** Function         Port_TimeOutCloseMux
+**
+** Description      This function is called when RFCOMM timesout on a command
+**                  as a result multiplexer connection is closed.
+**
+*******************************************************************************/
+void Port_TimeOutCloseMux (tRFC_MCB *p_mcb)
+{
+    tPORT  *p_port;
+    int    i;
+
+    RFCOMM_TRACE_EVENT0 ("Port_TimeOutCloseMux");
+
+    p_port = &rfc_cb.port.port[0];
+    for (i = 0; i < MAX_RFC_PORTS; i++, p_port++)
+    {
+        if (p_port->rfc.p_mcb == p_mcb)
+        {
+            port_rfc_closed (p_port, PORT_PEER_TIMEOUT);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_DataInd
+**
+** Description      This function is called from the RFCOMM layer when data
+**                  buffer is received from the peer.
+**
+*******************************************************************************/
+void PORT_DataInd (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf)
+{
+    tPORT  *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT8  rx_char1;
+    UINT32 events = 0;
+    UINT8  *p;
+    int    i;
+
+    RFCOMM_TRACE_EVENT1 ("PORT_DataInd with data length %d", p_buf->len);
+    if (!p_port)
+    {
+        GKI_freebuf (p_buf);
+        return;
+    }
+    /* If client registered callout callback with flow control we can just deliver receive data */
+    if (p_port->p_data_co_callback)
+    {
+        /* Another packet is delivered to user.  Send credits to peer if required */
+
+        if(p_port->p_data_co_callback(p_port->inx, (UINT8*)p_buf, -1, DATA_CO_CALLBACK_TYPE_INCOMING))
+            port_flow_control_peer(p_port, TRUE, 1);
+        else port_flow_control_peer(p_port, FALSE, 0);
+        //GKI_freebuf (p_buf);
+        return;
+    }
+
+    /* If client registered callback we can just deliver receive data */
+    if (p_port->p_data_callback)
+    {
+        /* Another packet is delivered to user.  Send credits to peer if required */
+        port_flow_control_peer(p_port, TRUE, 1);
+
+        p_port->p_data_callback (p_port->inx, (UINT8 *)(p_buf + 1) + p_buf->offset, p_buf->len);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    /* Check if rx queue exceeds the limit */
+    if ((p_port->rx.queue_size + p_buf->len > PORT_RX_CRITICAL_WM)
+     || (p_port->rx.queue.count + 1 > p_port->rx_buf_critical))
+    {
+        RFCOMM_TRACE_EVENT0 ("PORT_DataInd. Buffer over run. Dropping the buffer");
+        GKI_freebuf (p_buf);
+
+        RFCOMM_LineStatusReq (p_mcb, dlci, LINE_STATUS_OVERRUN);
+        return;
+    }
+
+    /* If user registered to receive notification when a particular byte is */
+    /* received we mast check all received bytes */
+    if (((rx_char1 = p_port->user_port_pars.rx_char1) != 0)
+     && (p_port->ev_mask & PORT_EV_RXFLAG))
+    {
+        for (i = 0, p = (UINT8 *)(p_buf + 1) + p_buf->offset; i < p_buf->len; i++)
+        {
+            if (*p++ == rx_char1)
+            {
+                events |= PORT_EV_RXFLAG;
+                break;
+            }
+        }
+    }
+
+    PORT_SCHEDULE_LOCK;
+
+    GKI_enqueue (&p_port->rx.queue, p_buf);
+    p_port->rx.queue_size += p_buf->len;
+
+    PORT_SCHEDULE_UNLOCK;
+
+    /* perform flow control procedures if necessary */
+    port_flow_control_peer(p_port, FALSE, 0);
+
+    /* If user indicated flow control can not deliver any notifications to him */
+    if (p_port->rx.user_fc)
+    {
+        if (events & PORT_EV_RXFLAG)
+            p_port->rx_flag_ev_pending = TRUE;
+
+        return;
+    }
+
+    events |= PORT_EV_RXCHAR;
+
+    /* Mask out all events that are not of interest to user */
+    events &= p_port->ev_mask;
+
+    if (p_port->p_callback && events)
+        p_port->p_callback (events, p_port->inx);
+}
+
+
+/*******************************************************************************
+**
+** Function         PORT_FlowInd
+**
+** Description      This function is called from the RFCOMM layer on the flow
+**                  control signal change.  Propagate change to the user.
+**
+*******************************************************************************/
+void PORT_FlowInd (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN enable_data)
+{
+    tPORT  *p_port = (tPORT *)NULL;
+    UINT32 events = 0;
+    int    i;
+
+    RFCOMM_TRACE_EVENT1 ("PORT_FlowInd fc:%d", enable_data);
+
+    if (dlci == 0)
+    {
+        p_mcb->peer_ready = enable_data;
+    }
+    else
+    {
+        if ((p_port = port_find_mcb_dlci_port (p_mcb, dlci)) == NULL)
+            return;
+
+        p_port->tx.peer_fc = !enable_data;
+    }
+
+    for (i = 0; i < MAX_RFC_PORTS; i++)
+    {
+        /* If DLCI is 0 event applies to all ports */
+        if (dlci == 0)
+        {
+            p_port = &rfc_cb.port.port[i];
+            if (!p_port->in_use
+             || (p_port->rfc.p_mcb != p_mcb)
+             || (p_port->rfc.state != RFC_STATE_OPENED))
+                continue;
+        }
+        events = 0;
+
+        /* Check if flow of data is still enabled */
+        events |= port_flow_control_user (p_port);
+
+        /* Check if data can be sent and send it */
+        events |= port_rfc_send_tx_data (p_port);
+
+        /* Mask out all events that are not of interest to user */
+        events &= p_port->ev_mask;
+
+        /* Send event to the application */
+        if (p_port->p_callback && events)
+            (p_port->p_callback)(events, p_port->inx);
+
+        /* If DLCI is not 0 event applies to one port only */
+        if (dlci != 0)
+            break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         port_rfc_send_tx_data
+**
+** Description      This function is when forward data can be sent to the peer
+**
+*******************************************************************************/
+UINT32 port_rfc_send_tx_data (tPORT *p_port)
+{
+    UINT32 events = 0;
+    BT_HDR *p_buf;
+
+    /* if there is data to be sent */
+    if (p_port->tx.queue_size > 0)
+    {
+        /* while the rfcomm peer is not flow controlling us, and peer is ready */
+        while (!p_port->tx.peer_fc && p_port->rfc.p_mcb && p_port->rfc.p_mcb->peer_ready)
+        {
+            /* get data from tx queue and send it */
+            PORT_SCHEDULE_LOCK;
+
+            if ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->tx.queue)) != NULL)
+            {
+                p_port->tx.queue_size -= p_buf->len;
+
+                PORT_SCHEDULE_UNLOCK;
+
+                RFCOMM_TRACE_DEBUG1 ("Sending RFCOMM_DataReq tx.queue_size=%d", p_port->tx.queue_size);
+
+                RFCOMM_DataReq (p_port->rfc.p_mcb, p_port->dlci, p_buf);
+
+                events |= PORT_EV_TXCHAR;
+
+                if (p_port->tx.queue_size == 0)
+                {
+                    events |= PORT_EV_TXEMPTY;
+                    break;
+                }
+            }
+            /* queue is empty-- all data sent */
+            else
+            {
+                PORT_SCHEDULE_UNLOCK;
+
+                events |= PORT_EV_TXEMPTY;
+                break;
+            }
+        }
+        /* If we flow controlled user based on the queue size enable data again */
+        events |= port_flow_control_user (p_port);
+    }
+    return (events & p_port->ev_mask);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_rfc_closed
+**
+** Description      This function when RFCOMM side of port is closed
+**
+*******************************************************************************/
+void port_rfc_closed (tPORT *p_port, UINT8 res)
+{
+    UINT8     old_signals;
+    UINT32    events = 0;
+    tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
+
+    if ((p_port->state == PORT_STATE_OPENING) && (p_port->is_server))
+    {
+        /* The servr side has not been informed that connection is up, ignore */
+        RFCOMM_TRACE_EVENT0 ("port_rfc_closed in OPENING state ignored");
+
+        rfc_port_timer_stop (p_port);
+        p_port->rfc.state = RFC_STATE_CLOSED;
+
+        if (p_mcb)
+        {
+            p_mcb->port_inx[p_port->dlci] = 0;
+
+            /* If there are no more ports opened on this MCB release it */
+            rfc_check_mcb_active (p_mcb);
+            p_port->rfc.p_mcb = NULL;
+        }
+
+        /* Need to restore DLCI to listening state
+         * if the server was on the initiating RFC
+         */
+        p_port->dlci &= 0xfe;
+
+        return;
+    }
+
+    if ((p_port->state != PORT_STATE_CLOSING) && (p_port->state != PORT_STATE_CLOSED))
+    {
+        p_port->line_status |= LINE_STATUS_FAILED;
+
+        old_signals = p_port->peer_ctrl.modem_signal;
+
+        p_port->peer_ctrl.modem_signal &= ~(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON);
+
+        events |= port_get_signal_changes (p_port, old_signals, p_port->peer_ctrl.modem_signal);
+
+        if(p_port->ev_mask & PORT_EV_CONNECT_ERR)
+            events |= PORT_EV_CONNECT_ERR;
+    }
+    RFCOMM_TRACE_EVENT2 ("port_rfc_closed state:%d sending events:%x", p_port->state, events);
+
+    if ((p_port->p_callback != NULL) && events)
+        p_port->p_callback (events, p_port->inx);
+
+    if (p_port->p_mgmt_callback)
+        p_port->p_mgmt_callback (res, p_port->inx);
+
+    p_port->rfc.state = RFC_STATE_CLOSED;
+
+    port_release_port (p_port);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_get_credits
+**
+** Description      Set initial values for credits.
+**                  Adjust max number of rx credits based on negotiated MTU.
+**                  Check max allowed num of bytes, max allowed num buffers,
+**                  should be less then 255
+**
+*******************************************************************************/
+void port_get_credits (tPORT *p_port, UINT8 k)
+{
+    p_port->credit_tx = k;
+    if (p_port->credit_tx == 0)
+        p_port->tx.peer_fc = TRUE;
+}
+
+
+
diff --git a/stack/rfcomm/port_utils.c b/stack/rfcomm/port_utils.c
new file mode 100644
index 0000000..ae41682
--- /dev/null
+++ b/stack/rfcomm/port_utils.c
@@ -0,0 +1,582 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  Port Emulation entity utilities
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "port_int.h"
+#include "rfc_int.h"
+#include "l2cdefs.h"
+#include "btm_int.h"
+#include "btu.h"
+
+#include <cutils/log.h>
+#define info(fmt, ...)  ALOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) ALOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) ALOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) ALOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+static const tPORT_STATE default_port_pars =
+{
+    PORT_BAUD_RATE_9600,
+    PORT_8_BITS,
+    PORT_ONESTOPBIT,
+    PORT_PARITY_NO,
+    PORT_ODD_PARITY,
+    PORT_FC_OFF,
+    0,                      /* No rx_char */
+    PORT_XON_DC1,
+    PORT_XOFF_DC3,
+};
+
+
+
+/*******************************************************************************
+**
+** Function         port_allocate_port
+**
+** Description      Look through the Port Control Blocks for a free one.  Note
+**                  that one server can open several ports with the same SCN
+**                  if it can support simulteneous requests from different
+**                  clients.
+**
+** Returns          Pointer to the PORT or NULL if not found
+**
+*******************************************************************************/
+tPORT *port_allocate_port (UINT8 dlci, BD_ADDR bd_addr)
+{
+    tPORT  *p_port = &rfc_cb.port.port[0];
+    UINT8  xx, yy;
+
+    for (xx = 0, yy = rfc_cb.rfc.last_port + 1; xx < MAX_RFC_PORTS; xx++, yy++)
+    {
+        if (yy >= MAX_RFC_PORTS)
+            yy = 0;
+
+        p_port = &rfc_cb.port.port[yy];
+        if (!p_port->in_use)
+        {
+            memset (p_port, 0, sizeof (tPORT));
+
+            p_port->in_use = TRUE;
+            p_port->inx    = yy + 1;
+
+            p_port->dlci   = dlci;
+            memcpy (p_port->bd_addr, bd_addr, BD_ADDR_LEN);
+
+            /* During the open set default state for the port connection */
+            port_set_defaults (p_port);
+
+            rfc_cb.rfc.last_port = yy;
+            debug("rfc_cb.port.port[%d] allocated, last_port:%d", yy, rfc_cb.rfc.last_port);
+            return (p_port);
+        }
+    }
+
+    /* If here, no free PORT found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_set_defaults
+**
+** Description      Set defualt port parameters
+**
+**
+*******************************************************************************/
+void port_set_defaults (tPORT *p_port)
+{
+    p_port->ev_mask        = 0;
+    p_port->p_callback     = NULL;
+    p_port->port_ctrl      = 0;
+    p_port->error          = 0;
+    p_port->line_status    = 0;
+    p_port->rx_flag_ev_pending = FALSE;
+    p_port->peer_mtu       = RFCOMM_DEFAULT_MTU;
+
+    p_port->user_port_pars = default_port_pars;
+    p_port->peer_port_pars = default_port_pars;
+
+    p_port->credit_tx      = 0;
+    p_port->credit_rx      = 0;
+/*  p_port->credit_rx_max  = PORT_CREDIT_RX_MAX;            Determined later */
+/*  p_port->credit_rx_low  = PORT_CREDIT_RX_LOW;            Determined later */
+
+    memset (&p_port->local_ctrl, 0, sizeof (p_port->local_ctrl));
+    memset (&p_port->peer_ctrl, 0, sizeof (p_port->peer_ctrl));
+    memset (&p_port->rx, 0, sizeof (p_port->rx));
+    memset (&p_port->tx, 0, sizeof (p_port->tx));
+}
+
+/*******************************************************************************
+**
+** Function         port_select_mtu
+**
+** Description      Select MTU which will best serve connection from our
+**                  point of view.
+**                  If our device is 1.2 or lower we calculate how many DH5s
+**                  fit into 1 RFCOMM buffer.
+**
+**
+*******************************************************************************/
+void port_select_mtu (tPORT *p_port)
+{
+    UINT16 packet_size;
+
+    /* Will select MTU only if application did not setup something */
+    if (p_port->mtu == 0)
+    {
+        /* find packet size which connection supports */
+        packet_size = btm_get_max_packet_size (p_port->bd_addr);
+        if (packet_size == 0)
+        {
+            /* something is very wrong */
+            RFCOMM_TRACE_WARNING0 ("port_select_mtu bad packet size");
+            p_port->mtu = RFCOMM_DEFAULT_MTU;
+        }
+        else
+        {
+            /* We try to negotiate MTU that each packet can be split into whole
+            number of max packets.  For example if link is 1.2 max packet size is 339 bytes.
+            At first calculate how many whole packets it is.  MAX L2CAP is 1691 + 4 overhead.
+            1695, that will be 5 Dh5 packets.  Now maximum RFCOMM packet is
+            5 * 339 = 1695. Minus 4 bytes L2CAP header 1691.  Minus RFCOMM 6 bytes header overhead 1685
+
+            For EDR 2.0 packet size is 1027.  So we better send RFCOMM packet as 1 3DH5 packet
+            1 * 1027 = 1027.  Minus 4 bytes L2CAP header 1023.  Minus RFCOMM 6 bytes header overhead 1017 */
+            if ((L2CAP_MTU_SIZE + L2CAP_PKT_OVERHEAD) >= packet_size)
+            {
+                p_port->mtu = ((L2CAP_MTU_SIZE + L2CAP_PKT_OVERHEAD) / packet_size * packet_size) - RFCOMM_DATA_OVERHEAD - L2CAP_PKT_OVERHEAD;
+                RFCOMM_TRACE_DEBUG1 ("port_select_mtu selected %d based on connection speed", p_port->mtu);
+            }
+            else
+            {
+                p_port->mtu = L2CAP_MTU_SIZE - RFCOMM_DATA_OVERHEAD;
+                RFCOMM_TRACE_DEBUG1 ("port_select_mtu selected %d based on l2cap PDU size", p_port->mtu);
+            }
+        }
+    }
+    else
+    {
+        RFCOMM_TRACE_DEBUG1 ("port_select_mtu application selected %d", p_port->mtu);
+    }
+    p_port->credit_rx_max  = (PORT_RX_HIGH_WM / p_port->mtu);
+    if( p_port->credit_rx_max > PORT_RX_BUF_HIGH_WM )
+        p_port->credit_rx_max = PORT_RX_BUF_HIGH_WM;
+    p_port->credit_rx_low  = (PORT_RX_LOW_WM / p_port->mtu);
+    if( p_port->credit_rx_low > PORT_RX_BUF_LOW_WM )
+        p_port->credit_rx_low = PORT_RX_BUF_LOW_WM;
+    p_port->rx_buf_critical = (PORT_RX_CRITICAL_WM / p_port->mtu);
+    if( p_port->rx_buf_critical > PORT_RX_BUF_CRITICAL_WM )
+        p_port->rx_buf_critical = PORT_RX_BUF_CRITICAL_WM;
+    RFCOMM_TRACE_DEBUG3 ("port_select_mtu credit_rx_max %d, credit_rx_low %d, rx_buf_critical %d",
+                          p_port->credit_rx_max, p_port->credit_rx_low, p_port->rx_buf_critical);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_release_port
+**
+** Description      Release port infor control block.
+**
+** Returns          Pointer to the PORT or NULL if not found
+**
+*******************************************************************************/
+void port_release_port (tPORT *p_port)
+{
+    BT_HDR *p_buf;
+    UINT32 mask;
+    tPORT_CALLBACK *p_port_cb;
+    tPORT_STATE user_port_pars;
+
+    PORT_SCHEDULE_LOCK;
+    debug("port_release_port, p_port:%p", p_port);
+    while ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->rx.queue)) != NULL)
+        GKI_freebuf (p_buf);
+
+    p_port->rx.queue_size = 0;
+
+    while ((p_buf = (BT_HDR *)GKI_dequeue (&p_port->tx.queue)) != NULL)
+        GKI_freebuf (p_buf);
+
+    p_port->tx.queue_size = 0;
+
+    PORT_SCHEDULE_UNLOCK;
+
+    p_port->state = PORT_STATE_CLOSED;
+
+    if (p_port->rfc.state == RFC_STATE_CLOSED)
+    {
+        RFCOMM_TRACE_DEBUG0 ("rfc_port_closed DONE");
+        if (p_port->rfc.p_mcb)
+        {
+            p_port->rfc.p_mcb->port_inx[p_port->dlci] = 0;
+
+            /* If there are no more ports opened on this MCB release it */
+            rfc_check_mcb_active (p_port->rfc.p_mcb);
+        }
+        rfc_port_timer_stop (p_port);
+
+        if( p_port->keep_port_handle )
+        {
+            RFCOMM_TRACE_DEBUG1 ("port_release_port:Initialize handle:%d", p_port->inx);
+            /* save event mask and callback */
+            mask = p_port->ev_mask;
+            p_port_cb = p_port->p_callback;
+            user_port_pars = p_port->user_port_pars;
+
+            port_set_defaults(p_port);
+            /* restore */
+            p_port->ev_mask         = mask;
+            p_port->p_callback      = p_port_cb;
+            p_port->user_port_pars  = user_port_pars;
+            p_port->mtu             = p_port->keep_mtu;
+
+            p_port->state           = PORT_STATE_OPENING;
+            p_port->rfc.p_mcb       = NULL;
+            if(p_port->is_server)
+                p_port->dlci       &= 0xfe;
+
+            p_port->local_ctrl.modem_signal = p_port->default_signal_state;
+            memcpy (p_port->bd_addr, BT_BD_ANY, BD_ADDR_LEN);
+        }
+        else
+        {
+            RFCOMM_TRACE_DEBUG1 ("port_release_port:Clean-up handle:%d", p_port->inx);
+            memset (p_port, 0, sizeof (tPORT));
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         port_find_mcb
+**
+** Description      This function checks if connection exists to device with
+**                  the BD_ADDR.
+**
+*******************************************************************************/
+tRFC_MCB *port_find_mcb (BD_ADDR bd_addr)
+{
+    int      i;
+
+    for (i = 0; i < MAX_BD_CONNECTIONS; i++)
+    {
+        if ((rfc_cb.port.rfc_mcb[i].state != RFC_MX_STATE_IDLE)
+         && !memcmp (rfc_cb.port.rfc_mcb[i].bd_addr, bd_addr, BD_ADDR_LEN))
+        {
+            /* Multiplexer channel found do not change anything */
+            return (&rfc_cb.port.rfc_mcb[i]);
+        }
+    }
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_find_mcb_dlci_port
+**
+** Description      Find port on the multiplexer channel based on DLCI.  If
+**                  this port with DLCI not found try to use even DLCI.  This
+**                  is for the case when client is establishing connection on
+**                  none-initiator MCB.
+**
+** Returns          Pointer to the PORT or NULL if not found
+**
+*******************************************************************************/
+tPORT *port_find_mcb_dlci_port (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    UINT8 inx;
+
+    if (!p_mcb)
+        return (NULL);
+
+    if (dlci > RFCOMM_MAX_DLCI)
+        return (NULL);
+
+    inx = p_mcb->port_inx[dlci];
+    if (inx == 0)
+        return (NULL);
+    else
+        return (&rfc_cb.port.port[inx - 1]);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_find_dlci_port
+**
+** Description      Find port with DLCI not assigned to multiplexer channel
+**
+** Returns          Pointer to the PORT or NULL if not found
+**
+*******************************************************************************/
+tPORT *port_find_dlci_port (UINT8 dlci)
+{
+    UINT16 i;
+    tPORT  *p_port;
+
+    for (i = 0; i < MAX_RFC_PORTS; i++)
+    {
+        p_port = &rfc_cb.port.port[i];
+        if (p_port->in_use && (p_port->rfc.p_mcb == NULL))
+        {
+            if (p_port->dlci == dlci)
+            {
+                return (p_port);
+            }
+            else if ((dlci & 0x01) && (p_port->dlci == (dlci - 1)))
+            {
+                p_port->dlci++;
+                return (p_port);
+            }
+        }
+    }
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_find_port
+**
+** Description      Find port with DLCI, BD_ADDR
+**
+** Returns          Pointer to the PORT or NULL if not found
+**
+*******************************************************************************/
+tPORT *port_find_port (UINT8 dlci, BD_ADDR bd_addr)
+{
+    UINT16 i;
+    tPORT  *p_port;
+
+    for (i = 0; i < MAX_RFC_PORTS; i++)
+    {
+        p_port = &rfc_cb.port.port[i];
+        if (p_port->in_use
+         && (p_port->dlci == dlci)
+         && !memcmp (p_port->bd_addr, bd_addr, BD_ADDR_LEN))
+        {
+            return (p_port);
+        }
+    }
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_flow_control_user
+**
+** Description      Check the current user flow control and if necessary return
+**                  events to be send to the user based on the user's specified
+**                  flow control type.
+**
+** Returns          event mask to be returned to the application
+**
+*******************************************************************************/
+UINT32 port_flow_control_user (tPORT *p_port)
+{
+    UINT32 event = 0;
+
+    /* Flow control to the user can be caused by flow controlling by the peer */
+    /* (FlowInd, or flow control by the peer RFCOMM (Fcon) or internally if */
+    /* tx_queue is full */
+    BOOLEAN fc = p_port->tx.peer_fc
+              || !p_port->rfc.p_mcb
+              || !p_port->rfc.p_mcb->peer_ready
+              || (p_port->tx.queue_size > PORT_TX_HIGH_WM)
+              || (p_port->tx.queue.count > PORT_TX_BUF_HIGH_WM);
+
+    if (p_port->tx.user_fc == fc)
+        return (0);
+
+    p_port->tx.user_fc = fc;
+
+    if (fc)
+        event = PORT_EV_FC;
+    else
+        event = PORT_EV_FC | PORT_EV_FCS;
+
+    return (event);
+}
+
+
+/*******************************************************************************
+**
+** Function         port_get_signal_changes
+**
+** Description      Check modem signals that has been changed
+**
+** Returns          event mask to be returned to the application
+**
+*******************************************************************************/
+UINT32 port_get_signal_changes (tPORT *p_port, UINT8 old_signals, UINT8 signal)
+{
+    UINT8  changed_signals = (signal ^ old_signals);
+    UINT32 events = 0;
+
+    if (changed_signals & PORT_DTRDSR_ON)
+    {
+        events |= PORT_EV_DSR;
+
+        if (signal & PORT_DTRDSR_ON)
+            events |= PORT_EV_DSRS;
+    }
+
+    if (changed_signals & PORT_CTSRTS_ON)
+    {
+        events |= PORT_EV_CTS;
+
+        if (signal & PORT_CTSRTS_ON)
+            events |= PORT_EV_CTSS;
+    }
+
+    if (changed_signals & PORT_RING_ON)
+        events |= PORT_EV_RING;
+
+    if (changed_signals & PORT_DCD_ON)
+    {
+        events |= PORT_EV_RLSD;
+
+        if (signal & PORT_DCD_ON)
+            events |= PORT_EV_RLSDS;
+    }
+
+    return (p_port->ev_mask & events);
+}
+
+/*******************************************************************************
+**
+** Function         port_flow_control_peer
+**
+** Description      Send flow control messages to the peer for both enabling
+**                  and disabling flow control, for both credit-based and
+**                  TS 07.10 flow control mechanisms.
+**
+** Returns          nothing
+**
+*******************************************************************************/
+void port_flow_control_peer(tPORT *p_port, BOOLEAN enable, UINT16 count)
+{
+    if (!p_port->rfc.p_mcb)
+        return;
+
+    /* If using credit based flow control */
+    if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
+    {
+        /* if want to enable flow from peer */
+        if (enable)
+        {
+            /* update rx credits */
+            if (count > p_port->credit_rx)
+            {
+                p_port->credit_rx = 0;
+            }
+            else
+            {
+                p_port->credit_rx -= count;
+            }
+
+            /* If credit count is less than low credit watermark, and user */
+            /* did not force flow control, send a credit update */
+            /* There might be a special case when we just adjusted rx_max */
+            if ((p_port->credit_rx <= p_port->credit_rx_low)
+             && !p_port->rx.user_fc
+             && (p_port->credit_rx_max > p_port->credit_rx))
+            {
+                rfc_send_credit(p_port->rfc.p_mcb, p_port->dlci,
+                                (UINT8) (p_port->credit_rx_max - p_port->credit_rx));
+
+                p_port->credit_rx = p_port->credit_rx_max;
+
+                p_port->rx.peer_fc = FALSE;
+            }
+        }
+        /* else want to disable flow from peer */
+        else
+        {
+            /* if client registered data callback, just do what they want */
+            if (p_port->p_data_callback || p_port->p_data_co_callback)
+            {
+                p_port->rx.peer_fc = TRUE;
+            }
+            /* if queue count reached credit rx max, set peer fc */
+            else if (p_port->rx.queue.count >= p_port->credit_rx_max)
+            {
+                p_port->rx.peer_fc = TRUE;
+            }
+        }
+    }
+    /* else using TS 07.10 flow control */
+    else
+    {
+        /* if want to enable flow from peer */
+        if (enable)
+        {
+            /* If rfcomm suspended traffic from the peer based on the rx_queue_size */
+            /* check if it can be resumed now */
+            if (p_port->rx.peer_fc
+             && (p_port->rx.queue_size < PORT_RX_LOW_WM)
+             && (p_port->rx.queue.count < PORT_RX_BUF_LOW_WM))
+            {
+                p_port->rx.peer_fc = FALSE;
+
+                /* If user did not force flow control allow traffic now */
+                if (!p_port->rx.user_fc)
+                    RFCOMM_FlowReq (p_port->rfc.p_mcb, p_port->dlci, TRUE);
+            }
+        }
+        /* else want to disable flow from peer */
+        else
+        {
+            /* if client registered data callback, just do what they want */
+            if (p_port->p_data_callback || p_port->p_data_co_callback)
+            {
+                p_port->rx.peer_fc = TRUE;
+                RFCOMM_FlowReq (p_port->rfc.p_mcb, p_port->dlci, FALSE);
+            }
+            /* Check the size of the rx queue.  If it exceeds certain */
+            /* level and flow control has not been sent to the peer do it now */
+            else if ( ((p_port->rx.queue_size > PORT_RX_HIGH_WM)
+                     || (p_port->rx.queue.count > PORT_RX_BUF_HIGH_WM))
+                     && !p_port->rx.peer_fc)
+            {
+                RFCOMM_TRACE_EVENT0 ("PORT_DataInd Data reached HW. Sending FC set.");
+
+                p_port->rx.peer_fc = TRUE;
+                RFCOMM_FlowReq (p_port->rfc.p_mcb, p_port->dlci, FALSE);
+            }
+        }
+    }
+}
+
diff --git a/stack/rfcomm/rfc_int.h b/stack/rfcomm/rfc_int.h
new file mode 100644
index 0000000..83a63e3
--- /dev/null
+++ b/stack/rfcomm/rfc_int.h
@@ -0,0 +1,387 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains definitions internal to the RFC unit
+ *
+ *****************************************************************************/
+
+#ifndef RFC_INT_H
+#define RFC_INT_H
+
+#include "l2c_api.h"
+#include "port_int.h"
+
+/*
+** Define RFCOMM result codes
+*/
+#define RFCOMM_SUCCESS          0
+#define RFCOMM_ERROR            1
+#define RFCOMM_LOW_RESOURCES    2
+#define RFCOMM_TRY_LATER        3
+
+#define RFCOMM_USER_ERR         111
+#define RFCOMM_SECURITY_ERR     112
+
+/*
+** Define max and min RFCOMM MTU (N1)
+*/
+#define RFCOMM_MIN_MTU          23
+#define RFCOMM_MAX_MTU          32767
+
+extern void RFCOMM_StartReq (tRFC_MCB *p_mcb);
+extern void RFCOMM_StartRsp (tRFC_MCB *p_mcb, UINT16 result);
+
+extern void RFCOMM_DlcEstablishReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu);
+extern void RFCOMM_DlcEstablishRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result);
+
+extern void RFCOMM_DataReq (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf);
+
+extern void RFCOMM_DlcReleaseReq (tRFC_MCB *p_mcb, UINT8 dlci);
+
+extern void RFCOMM_ParNegReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu);
+extern void RFCOMM_ParNegRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k);
+
+extern void RFCOMM_TestReq (UINT8 *p_data, UINT16 len);
+
+#define RFCOMM_FLOW_STATE_DISABLE       0
+#define RFCOMM_FLOW_STATE_ENABLE        1
+
+extern void RFCOMM_FlowReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 state);
+
+extern void RFCOMM_PortNegReq (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars);
+extern void RFCOMM_PortNegRsp (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, UINT16 param_mask);
+
+extern void RFCOMM_ControlReq (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars);
+extern void RFCOMM_ControlRsp (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars);
+
+extern void RFCOMM_LineStatusReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 line_status);
+/*
+** Define logical struct used for sending and decoding MX frames
+*/
+typedef struct
+{
+    UINT8   dlci;
+    UINT8   type;
+    UINT8   cr;
+    UINT8   ea;
+    UINT8   pf;
+    UINT8   credit;
+
+    union
+    {
+        struct
+        {
+            UINT8 dlci;
+            UINT8 frame_type;
+            UINT8 conv_layer;
+            UINT8 priority;
+            UINT8 t1;
+            UINT16 mtu;
+            UINT8 n2;
+            UINT8 k;
+        } pn;
+        struct
+        {
+            UINT8   *p_data;
+            UINT16  data_len;
+        } test;
+        struct
+        {
+            UINT8 dlci;
+            UINT8 signals;
+            UINT8 break_present;
+            UINT8 break_duration;
+        } msc;
+        struct
+        {
+            UINT8 ea;
+            UINT8 cr;
+            UINT8 type;
+        } nsc;
+        struct
+        {
+            UINT8 dlci;
+            UINT8 is_request;
+            UINT8 baud_rate;
+            UINT8 byte_size;
+            UINT8 stop_bits;
+            UINT8 parity;
+            UINT8 parity_type;
+            UINT8 fc_type;
+            UINT8 xon_char;
+            UINT8 xoff_char;
+            UINT16 param_mask;
+        } rpn;
+        struct
+        {
+            UINT8 dlci;
+            UINT8 line_status;
+        } rls;
+    } u;
+} MX_FRAME;
+
+#define LINE_STATUS_NO_ERROR       0x00
+#define LINE_STATUS_OVERRUN        0x02  /* Receive Overrun Error   */
+#define LINE_STATUS_RXPARITY       0x04  /* Receive Parity Error    */
+#define LINE_STATUS_FRAME          0x08  /* Receive Framing error   */
+#define LINE_STATUS_FAILED         0x10  /* Connection Failed       */
+
+/*
+** Define states and events for the RFC multiplexer state machine
+*/
+#define RFC_MX_STATE_IDLE           0
+#define RFC_MX_STATE_WAIT_CONN_CNF  1
+#define RFC_MX_STATE_CONFIGURE      2
+#define RFC_MX_STATE_SABME_WAIT_UA  3
+#define RFC_MX_STATE_WAIT_SABME     4
+#define RFC_MX_STATE_CONNECTED      5
+#define RFC_MX_STATE_DISC_WAIT_UA   6
+
+/*
+** Define port states
+*/
+#define RFC_STATE_CLOSED                0
+#define RFC_STATE_SABME_WAIT_UA         1
+#define RFC_STATE_ORIG_WAIT_SEC_CHECK   2
+#define RFC_STATE_TERM_WAIT_SEC_CHECK   3
+#define RFC_STATE_OPENED                4
+#define RFC_STATE_DISC_WAIT_UA          5
+
+/*
+** Events that can be received by multiplexer as well as port state machines
+*/
+#define RFC_EVENT_SABME                 0
+#define RFC_EVENT_UA                    1
+#define RFC_EVENT_DM                    2
+#define RFC_EVENT_DISC                  3
+#define RFC_EVENT_UIH                   4
+#define RFC_EVENT_TIMEOUT               5
+#define RFC_EVENT_BAD_FRAME             50
+/*
+** Multiplexer events
+*/
+#define RFC_MX_EVENT_START_REQ          6
+#define RFC_MX_EVENT_START_RSP          7
+#define RFC_MX_EVENT_CLOSE_REQ          8
+#define RFC_MX_EVENT_CONN_CNF           9
+#define RFC_MX_EVENT_CONN_IND           10
+#define RFC_MX_EVENT_CONF_CNF           11
+#define RFC_MX_EVENT_CONF_IND           12
+#define RFC_MX_EVENT_QOS_VIOLATION_IND  13
+#define RFC_MX_EVENT_DISC_IND           14
+#define RFC_MX_EVENT_TEST_CMD           15
+#define RFC_MX_EVENT_TEST_RSP           16
+#define RFC_MX_EVENT_FCON_CMD           17
+#define RFC_MX_EVENT_FCOFF_CMD          18
+#define RFC_MX_EVENT_NSC                19
+#define RFC_MX_EVENT_NSC_RSP            20
+
+/*
+** Port events
+*/
+#define RFC_EVENT_OPEN                  9
+#define RFC_EVENT_ESTABLISH_RSP         11
+#define RFC_EVENT_CLOSE                 12
+#define RFC_EVENT_CLEAR                 13
+#define RFC_EVENT_DATA                  14
+#define RFC_EVENT_SEC_COMPLETE          15
+
+// btla-specific ++
+#define RFC_T1_TIMEOUT                  20   /* seconds to wait for reply with Poll bit */
+#define RFC_PORT_T1_TIMEOUT             60   /* seconds to wait for reply with Poll bit other than MX */
+#define RFC_T2_TIMEOUT                  20   /* timeout to wait for Mx UIH */
+// btla-specific --
+#define RFC_DISC_TIMEOUT                3    /* If something goes wrong and we send DISC we should not wait for min */
+#define RFC_CLOSE_TIMEOUT               10
+#define RFCOMM_CONN_TIMEOUT            120   /* first connection to be established on Mx */
+
+
+/* Define RFComm control block
+*/
+typedef struct
+{
+    MX_FRAME  rx_frame;
+    tL2CAP_APPL_INFO  reg_info;              /* L2CAP Registration info */
+    tRFC_MCB *p_rfc_lcid_mcb[MAX_L2CAP_CHANNELS];     /* MCB based on the L2CAP's lcid */
+    BOOLEAN   peer_rx_disabled;              /* If TRUE peer sent FCOFF */
+    UINT8     last_mux;                      /* Last mux allocated */
+    UINT8     last_port;                     /* Last port allocated */
+} tRFCOMM_CB;
+
+/* Main Control Block for the RFCOMM Layer (PORT and RFC) */
+typedef struct
+{
+    tRFCOMM_CB  rfc;
+    tPORT_CB    port;
+    UINT8       trace_level;
+} tRFC_CB;
+
+
+#if RFC_DYNAMIC_MEMORY == FALSE
+RFC_API extern tRFC_CB  rfc_cb;
+#else
+RFC_API extern tRFC_CB *rfc_cb_ptr;
+#define rfc_cb (*rfc_cb_ptr)
+#endif
+
+/* Timer running on the multiplexor channel while no DLCI connection is opened */
+#define RFC_MCB_INIT_INACT_TIMER    60  /* in seconds */
+
+/* Timer running on the multiplexor channel after last DLCI is released */
+#define RFC_MCB_RELEASE_INACT_TIMER 2   /* in seconds */
+
+/*
+** Define RFCOMM frame processing errors
+*/
+#define RFCOMM_ERR_BAD_SABME        1
+#define RFCOMM_ERR_BAD_UA           2
+#define RFCOMM_ERR_BAD_DM           3
+#define RFCOMM_ERR_BAD_DISC         4
+#define RFCOMM_ERR_BAD_UIH          5
+
+#ifdef RFCOMM_PRECALC_FCS
+
+#define RFCOMM_SABME_FCS(p_data, cr, dlci) rfc_sabme_fcs[cr][dlci]
+#define RFCOMM_UA_FCS(p_data, cr, dlci)    rfc_ua_fcs[cr][dlci]
+#define RFCOMM_DM_FCS(p_data, cr, dlci)    rfc_dm_fcs[cr][dlci]
+#define RFCOMM_DISC_FCS(p_data, cr, dlci)  rfc_disc_fcs[cr][dlci]
+#define RFCOMM_UIH_FCS(p_data, dlci)       rfc_uih_fcs[dlci]
+
+#else
+
+extern  UINT8 rfc_calc_fcs (UINT16 len, UINT8 *p);
+
+#define RFCOMM_SABME_FCS(p_data, cr, dlci) rfc_calc_fcs(3, p_data)
+#define RFCOMM_UA_FCS(p_data, cr, dlci)    rfc_calc_fcs(3, p_data)
+#define RFCOMM_DM_FCS(p_data, cr, dlci)    rfc_calc_fcs(3, p_data)
+#define RFCOMM_DISC_FCS(p_data, cr, dlci)  rfc_calc_fcs(3, p_data)
+#define RFCOMM_UIH_FCS(p_data, dlci)       rfc_calc_fcs(2, p_data)
+
+#endif
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern void rfc_mx_sm_execute (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+
+/*
+** Functions provided by the rfc_port_fsm.c
+*/
+extern void rfc_port_sm_execute (tPORT *p_port, UINT16 event, void *p_data);
+
+
+extern void rfc_process_pn (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command, MX_FRAME *p_frame);
+extern void rfc_process_msc (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command, MX_FRAME *p_frame);
+extern void rfc_process_rpn (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command, BOOLEAN is_request, MX_FRAME *p_frame);
+extern void rfc_process_rls (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command, MX_FRAME *p_frame);
+extern void rfc_process_nsc (tRFC_MCB *p_rfc_mcb, MX_FRAME *p_frame);
+extern void rfc_process_test_rsp (tRFC_MCB *p_rfc_mcb, BT_HDR *p_buf);
+extern void rfc_process_fcon (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command);
+extern void rfc_process_fcoff (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command);
+extern void rfc_process_l2cap_congestion (tRFC_MCB *p_mcb, BOOLEAN is_congested);
+
+/*
+** Functions provided by the rfc_utils.c
+*/
+tRFC_MCB  *rfc_alloc_multiplexer_channel (BD_ADDR bd_addr, BOOLEAN is_initiator);
+extern void      rfc_release_multiplexer_channel (tRFC_MCB *p_rfc_mcb);
+extern void      rfc_timer_start (tRFC_MCB *p_rfc_mcb, UINT16 timeout);
+extern void      rfc_timer_stop (tRFC_MCB *p_rfc_mcb);
+extern void      rfc_port_timer_start (tPORT *p_port, UINT16 tout);
+extern void      rfc_port_timer_stop (tPORT *p_port);
+
+BOOLEAN   rfc_check_uih_fcs (UINT8 dlci, UINT8 received_fcs);
+BOOLEAN   rfc_check_fcs (UINT16 len, UINT8 *p, UINT8 received_fcs);
+tRFC_MCB  *rfc_find_lcid_mcb (UINT16 lcid);
+extern void      rfc_save_lcid_mcb (tRFC_MCB *p_rfc_mcb, UINT16 lcid);
+extern void      rfc_check_mcb_active (tRFC_MCB *p_mcb);
+extern void      rfc_port_closed (tPORT *p_port);
+extern void      rfc_sec_check_complete (BD_ADDR bd_addr, void *p_ref_data, UINT8 res);
+extern void      rfc_inc_credit (tPORT *p_port, UINT8 credit);
+extern void      rfc_dec_credit (tPORT *p_port);
+extern void      rfc_check_send_cmd(tRFC_MCB *p_mcb, BT_HDR *p_buf);
+
+/*
+** Functions provided by the rfc_ts_frames.c
+*/
+extern void     rfc_send_sabme (tRFC_MCB *p_rfc_mcb, UINT8 dlci);
+extern void     rfc_send_ua (tRFC_MCB *p_rfc_mcb, UINT8 dlci);
+extern void     rfc_send_dm (tRFC_MCB *p_rfc_mcb, UINT8 dlci, BOOLEAN pf);
+extern void     rfc_send_disc (tRFC_MCB *p_rfc_mcb, UINT8 dlci);
+extern void     rfc_send_pn (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command, UINT16 mtu,
+                             UINT8 cl, UINT8 k);
+extern void     rfc_send_test (tRFC_MCB *p_rfc_mcb, BOOLEAN is_command, BT_HDR *p_buf);
+extern void     rfc_send_msc (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command,
+                              tPORT_CTRL *p_pars);
+extern void     rfc_send_rls (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command, UINT8 status);
+extern void     rfc_send_rpn (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command,
+                              tPORT_STATE *p_pars, UINT16 mask);
+extern void     rfc_send_fcon (tRFC_MCB *p_mcb, BOOLEAN is_command);
+extern void     rfc_send_fcoff (tRFC_MCB *p_mcb, BOOLEAN is_command);
+extern void     rfc_send_buf_uih (tRFC_MCB *p_rfc_mcb, UINT8 dlci, BT_HDR *p_buf);
+extern void     rfc_send_credit(tRFC_MCB *p_mcb, UINT8 dlci, UINT8 credit);
+extern void     rfc_process_mx_message (tRFC_MCB *p_rfc_mcb, BT_HDR *p_buf);
+extern UINT8    rfc_parse_data (tRFC_MCB *p_rfc_mcb, MX_FRAME *p_frame, BT_HDR *p_buf);
+
+/*
+** Functions provided by the rfc_disp.c
+*/
+
+
+
+/* Call back functions from RFCOMM */
+extern void rfcomm_l2cap_if_init (void);
+
+extern void PORT_StartInd (tRFC_MCB *p_mcb);
+extern void PORT_StartCnf (tRFC_MCB *p_mcb, UINT16 result);
+
+extern void PORT_CloseInd (tRFC_MCB *p_mcb);
+extern void Port_TimeOutCloseMux (tRFC_MCB *p_mcb);
+
+extern void PORT_DlcEstablishInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu);
+extern void PORT_DlcEstablishCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result);
+
+extern void PORT_DataInd (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf);
+
+extern void PORT_DlcReleaseInd (tRFC_MCB *p_mcb, UINT8 dlci);
+
+extern void PORT_ParNegInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k);
+extern void PORT_ParNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k);
+
+extern void PORT_TestCnf (tRFC_MCB *p_mcb, UINT8 *p_data, UINT16 len);
+
+extern void PORT_FlowInd (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN fc);
+
+extern void PORT_PortNegInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, UINT16 param_mask);
+extern void PORT_PortNegCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars, UINT16 result);
+
+extern void PORT_ControlInd (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars);
+extern void PORT_ControlCnf (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars);
+
+extern void PORT_LineStatusInd (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 line_status);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
diff --git a/stack/rfcomm/rfc_l2cap_if.c b/stack/rfcomm/rfc_l2cap_if.c
new file mode 100644
index 0000000..cb50612
--- /dev/null
+++ b/stack/rfcomm/rfc_l2cap_if.c
@@ -0,0 +1,443 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains L2CAP interface functions
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "port_int.h"
+#include "l2c_api.h"
+#include "l2cdefs.h"
+#include "rfc_int.h"
+
+
+/*
+** Define Callback functions to be called by L2CAP
+*/
+static void RFCOMM_ConnectInd (BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id);
+static void RFCOMM_ConnectCnf (UINT16  lcid, UINT16 err);
+static void RFCOMM_ConfigInd (UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+static void RFCOMM_ConfigCnf (UINT16 lcid, tL2CAP_CFG_INFO *p_cfg);
+static void RFCOMM_DisconnectInd (UINT16 lcid, BOOLEAN is_clear);
+static void RFCOMM_QoSViolationInd (BD_ADDR bd_addr);
+static void RFCOMM_BufDataInd (UINT16 lcid, BT_HDR *p_buf);
+static void RFCOMM_CongestionStatusInd (UINT16 lcid, BOOLEAN is_congested);
+
+
+/*******************************************************************************
+**
+** Function         rfcomm_l2cap_if_init
+**
+** Description      This function is called during the RFCOMM task startup
+**                  to register interface functions with L2CAP.
+**
+*******************************************************************************/
+void rfcomm_l2cap_if_init (void)
+{
+    tL2CAP_APPL_INFO *p_l2c = &rfc_cb.rfc.reg_info;
+
+    p_l2c->pL2CA_ConnectInd_Cb       = RFCOMM_ConnectInd;
+    p_l2c->pL2CA_ConnectCfm_Cb       = RFCOMM_ConnectCnf;
+    p_l2c->pL2CA_ConnectPnd_Cb       = NULL;
+    p_l2c->pL2CA_ConfigInd_Cb        = RFCOMM_ConfigInd;
+    p_l2c->pL2CA_ConfigCfm_Cb        = RFCOMM_ConfigCnf;
+    p_l2c->pL2CA_DisconnectInd_Cb    = RFCOMM_DisconnectInd;
+    p_l2c->pL2CA_DisconnectCfm_Cb    = NULL;
+    p_l2c->pL2CA_QoSViolationInd_Cb  = RFCOMM_QoSViolationInd;
+    p_l2c->pL2CA_DataInd_Cb          = RFCOMM_BufDataInd;
+    p_l2c->pL2CA_CongestionStatus_Cb = RFCOMM_CongestionStatusInd;
+    p_l2c->pL2CA_TxComplete_Cb       = NULL;
+
+
+    L2CA_Register (BT_PSM_RFCOMM, p_l2c);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ConnectInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_ConnectInd received.  Allocate multiplexer control block
+**                  and dispatch the event to it.
+**
+*******************************************************************************/
+void RFCOMM_ConnectInd (BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
+{
+    tRFC_MCB *p_mcb = rfc_alloc_multiplexer_channel(bd_addr, FALSE);
+
+    if ((p_mcb)&&(p_mcb->state != RFC_MX_STATE_IDLE))
+    {
+        /* if this is collision case */
+        if ((p_mcb->is_initiator)&&(p_mcb->state == RFC_MX_STATE_WAIT_CONN_CNF))
+        {
+            p_mcb->pending_lcid = lcid;
+            p_mcb->pending_id   = id;
+
+            /* wait random timeout (2 - 12) to resolve collision */
+            /* if peer gives up then local device rejects incoming connection and continues as initiator */
+            /* if timeout, local device disconnects outgoing connection and continues as acceptor */
+            RFCOMM_TRACE_DEBUG2 ("RFCOMM_ConnectInd start timer for collision, initiator's LCID(0x%x), acceptor's LCID(0x%x)",
+                                  p_mcb->lcid, p_mcb->pending_lcid);
+
+            rfc_timer_start(p_mcb, (UINT16)(GKI_get_tick_count()%10 + 2));
+            return;
+        }
+        else
+        {
+            /* we cannot accept connection request from peer at this state */
+            /* don't update lcid */
+            p_mcb = NULL;
+        }
+    }
+    else
+    {
+        /* store mcb even if null */
+        rfc_save_lcid_mcb (p_mcb, lcid);
+    }
+
+    if (p_mcb == NULL)
+    {
+        L2CA_ConnectRsp (bd_addr, id, lcid, L2CAP_CONN_NO_RESOURCES, 0);
+        return;
+    }
+    p_mcb->lcid     = lcid;
+
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONN_IND, &id);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ConnectCnf
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_ConnectCnf received.  Save L2CAP handle and dispatch
+**                  event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_ConnectCnf (UINT16 lcid, UINT16 result)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_ConnectCnf LCID:0x%x", lcid);
+        return;
+    }
+
+    if (p_mcb->pending_lcid)
+    {
+        /* if peer rejects our connect request but peer's connect request is pending */
+        if (result != L2CAP_CONN_OK )
+        {
+            UINT16 i;
+            UINT8  idx;
+
+            RFCOMM_TRACE_DEBUG1 ("RFCOMM_ConnectCnf retry as acceptor on pending LCID(0x%x)", p_mcb->pending_lcid);
+
+            /* remove mcb from mapping table */
+            rfc_save_lcid_mcb (NULL, p_mcb->lcid);
+
+            p_mcb->lcid         = p_mcb->pending_lcid;
+            p_mcb->is_initiator = FALSE;
+            p_mcb->state        = RFC_MX_STATE_IDLE;
+
+            /* store mcb into mapping table */
+            rfc_save_lcid_mcb (p_mcb, p_mcb->lcid);
+
+            /* update direction bit */
+            for (i = 0; i < RFCOMM_MAX_DLCI; i += 2)
+            {
+                if ((idx = p_mcb->port_inx[i]) != 0)
+                {
+                    p_mcb->port_inx[i] = 0;
+                    p_mcb->port_inx[i+1] = idx;
+                    rfc_cb.port.port[idx - 1].dlci += 1;
+                    RFCOMM_TRACE_DEBUG2 ("RFCOMM MX - DLCI:%d -> %d", i, rfc_cb.port.port[idx - 1].dlci);
+                }
+            }
+
+            rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONN_IND, &(p_mcb->pending_id));
+            return;
+        }
+        else
+        {
+            RFCOMM_TRACE_DEBUG1 ("RFCOMM_ConnectCnf peer gave up pending LCID(0x%x)", p_mcb->pending_lcid);
+
+            /* Peer gave up his connection request, make sure cleaning up L2CAP channel */
+            L2CA_ConnectRsp (p_mcb->bd_addr, p_mcb->pending_id, p_mcb->pending_lcid, L2CAP_CONN_NO_RESOURCES, 0);
+
+            p_mcb->pending_lcid = 0;
+        }
+    }
+
+    /* Save LCID to be used in all consecutive calls to L2CAP */
+    p_mcb->lcid         = lcid;
+
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONN_CNF, &result);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ConfigInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_ConfigInd received.  Save parameters in the control
+**                  block and dispatch event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_ConfigInd (UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_ConfigInd LCID:0x%x", lcid);
+        return;
+    }
+
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONF_IND, (void *)p_cfg);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ConfigCnf
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_ConfigCnf received.  Save L2CAP handle and dispatch
+**                  event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_ConfigCnf (UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_ConfigCnf no MCB LCID:0x%x", lcid);
+        return;
+    }
+
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONF_CNF, (void *)p_cfg);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_QoSViolationInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_QoSViolationIndInd received.  Dispatch event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_QoSViolationInd (BD_ADDR bd_addr)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_DisconnectInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  L2CA_DisconnectInd received.  Dispatch event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_DisconnectInd (UINT16 lcid, BOOLEAN is_conf_needed)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+
+    if (is_conf_needed)
+    {
+        L2CA_DisconnectRsp (lcid);
+    }
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_WARNING1 ("RFCOMM_DisconnectInd LCID:0x%x", lcid);
+        return;
+    }
+
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_DISC_IND, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_BufDataInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  data RFCOMM frame is received.  Parse the frames, check
+**                  the checksum and dispatch event to multiplexer or port
+**                  state machine depending on the frame destination.
+**
+*******************************************************************************/
+void RFCOMM_BufDataInd (UINT16 lcid, BT_HDR *p_buf)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+    tPORT    *p_port;
+    UINT8    event;
+
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_WARNING1 ("RFCOMM_BufDataInd LCID:0x%x", lcid);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    event = rfc_parse_data (p_mcb, &rfc_cb.rfc.rx_frame, p_buf);
+
+    /* If the frame did not pass validation just ignore it */
+    if (event == RFC_EVENT_BAD_FRAME)
+    {
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    if (rfc_cb.rfc.rx_frame.dlci == RFCOMM_MX_DLCI)
+    {
+        /* Take special care of the Multiplexer Control Messages */
+        if (event == RFC_EVENT_UIH)
+        {
+            rfc_process_mx_message (p_mcb, p_buf);
+            return;
+        }
+
+        /* Other multiplexer events go to state machine */
+        rfc_mx_sm_execute (p_mcb, event, NULL);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    /* The frame was received on the data channel DLCI, verify that DLC exists */
+    if (((p_port = port_find_mcb_dlci_port (p_mcb, rfc_cb.rfc.rx_frame.dlci)) == NULL)
+     || (!p_port->rfc.p_mcb))
+    {
+        /* If this is a SABME on the new port, check if any appl is waiting for it */
+        if (event != RFC_EVENT_SABME)
+        {
+            if (( p_mcb->is_initiator && !rfc_cb.rfc.rx_frame.cr)
+             || (!p_mcb->is_initiator &&  rfc_cb.rfc.rx_frame.cr))
+                rfc_send_dm (p_mcb, rfc_cb.rfc.rx_frame.dlci, rfc_cb.rfc.rx_frame.pf);
+            GKI_freebuf (p_buf);
+            return;
+        }
+
+        if ((p_port = port_find_dlci_port (rfc_cb.rfc.rx_frame.dlci)) == NULL)
+        {
+            rfc_send_dm (p_mcb, rfc_cb.rfc.rx_frame.dlci, TRUE);
+            GKI_freebuf (p_buf);
+            return;
+        }
+        p_mcb->port_inx[rfc_cb.rfc.rx_frame.dlci] = p_port->inx;
+        p_port->rfc.p_mcb = p_mcb;
+    }
+
+    if (event == RFC_EVENT_UIH)
+    {
+        if (p_buf->len > 0)
+            rfc_port_sm_execute (p_port, event, p_buf);
+        else
+            GKI_freebuf (p_buf);
+
+        if (rfc_cb.rfc.rx_frame.credit != 0)
+            rfc_inc_credit (p_port, rfc_cb.rfc.rx_frame.credit);
+
+        return;
+    }
+    rfc_port_sm_execute (p_port, event,  NULL);
+    GKI_freebuf (p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         RFCOMM_CongestionStatusInd
+**
+** Description      This is a callback function called by L2CAP when
+**                  data RFCOMM L2CAP congestion status changes
+**
+*******************************************************************************/
+void RFCOMM_CongestionStatusInd (UINT16 lcid, BOOLEAN is_congested)
+{
+    tRFC_MCB *p_mcb = rfc_find_lcid_mcb (lcid);
+
+    if (!p_mcb)
+    {
+        RFCOMM_TRACE_ERROR1 ("RFCOMM_CongestionStatusInd dropped LCID:0x%x", lcid);
+        return;
+    }
+    else
+    {
+        RFCOMM_TRACE_EVENT1 ("RFCOMM_CongestionStatusInd LCID:0x%x", lcid);
+    }
+    rfc_process_l2cap_congestion (p_mcb, is_congested);
+}
+
+/*******************************************************************************
+**
+** Function         rfc_find_lcid_mcb
+**
+** Description      This function returns MCB block supporting local cid
+**
+*******************************************************************************/
+tRFC_MCB *rfc_find_lcid_mcb (UINT16 lcid)
+{
+    tRFC_MCB *p_mcb;
+
+    if (lcid - L2CAP_BASE_APPL_CID >= MAX_L2CAP_CHANNELS)
+    {
+        RFCOMM_TRACE_ERROR1 ("rfc_find_lcid_mcb LCID:0x%x", lcid);
+        return (NULL);
+    }
+    else
+    {
+        if ((p_mcb = rfc_cb.rfc.p_rfc_lcid_mcb[lcid - L2CAP_BASE_APPL_CID]) != NULL)
+        {
+            if (p_mcb->lcid != lcid)
+            {
+                RFCOMM_TRACE_WARNING2 ("rfc_find_lcid_mcb LCID reused LCID:0x%x current:0x%x", lcid, p_mcb->lcid);
+                return (NULL);
+            }
+        }
+    }
+    return (p_mcb);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_save_lcid_mcb
+**
+** Description      This function returns MCB block supporting local cid
+**
+*******************************************************************************/
+void rfc_save_lcid_mcb (tRFC_MCB *p_mcb, UINT16 lcid)
+{
+    rfc_cb.rfc.p_rfc_lcid_mcb[lcid - L2CAP_BASE_APPL_CID] = p_mcb;
+}
diff --git a/stack/rfcomm/rfc_mx_fsm.c b/stack/rfcomm/rfc_mx_fsm.c
new file mode 100644
index 0000000..842f8ee
--- /dev/null
+++ b/stack/rfcomm/rfc_mx_fsm.c
@@ -0,0 +1,663 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains state machine and action routines for multiplexer
+ *  channel of the RFCOMM unit
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "gki.h"
+#include "bt_types.h"
+#include "rfcdefs.h"
+#include "l2cdefs.h"
+#include "port_api.h"
+#include "port_int.h"
+#include "l2c_api.h"
+#include "rfc_int.h"
+
+#define L2CAP_SUCCESS   0
+#define L2CAP_ERROR     1
+
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void rfc_mx_sm_state_idle (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_state_wait_conn_cnf (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_state_configure (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_sabme_wait_ua (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_state_wait_sabme (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_state_connected (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+static void rfc_mx_sm_state_disc_wait_ua (tRFC_MCB *p_mcb, UINT16 event, void *p_data);
+
+static void rfc_mx_send_config_req (tRFC_MCB *p_mcb);
+static void rfc_mx_conf_ind (tRFC_MCB *p_mcb, tL2CAP_CFG_INFO *p_cfg);
+static void rfc_mx_conf_cnf (tRFC_MCB *p_mcb, tL2CAP_CFG_INFO *p_cfg);
+
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_execute
+**
+** Description      This function sends multiplexor events through the state
+**                  machine.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_execute (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    switch (p_mcb->state)
+    {
+    case RFC_MX_STATE_IDLE:
+        rfc_mx_sm_state_idle (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_WAIT_CONN_CNF:
+        rfc_mx_sm_state_wait_conn_cnf (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_CONFIGURE:
+        rfc_mx_sm_state_configure (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_SABME_WAIT_UA:
+        rfc_mx_sm_sabme_wait_ua (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_WAIT_SABME:
+        rfc_mx_sm_state_wait_sabme (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_CONNECTED:
+        rfc_mx_sm_state_connected (p_mcb, event, p_data);
+        break;
+
+    case RFC_MX_STATE_DISC_WAIT_UA:
+        rfc_mx_sm_state_disc_wait_ua (p_mcb, event, p_data);
+        break;
+
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_idle
+**
+** Description      This function handles events when the multiplexer is in
+**                  IDLE state. This state exists when connection is being
+**                  initially established.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_idle (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_idle - evt:%d", event);
+    switch (event)
+    {
+    case RFC_MX_EVENT_START_REQ:
+
+        /* Initialize L2CAP MTU */
+        p_mcb->peer_l2cap_mtu = L2CAP_DEFAULT_MTU - RFCOMM_MIN_OFFSET - 1;
+
+        if ((p_mcb->lcid = L2CA_ConnectReq (BT_PSM_RFCOMM, p_mcb->bd_addr)) == 0)
+        {
+            PORT_StartCnf (p_mcb, RFCOMM_ERROR);
+            return;
+        }
+        /* Save entry for quicker access to mcb based on the LCID */
+        rfc_save_lcid_mcb (p_mcb, p_mcb->lcid);
+
+        p_mcb->state = RFC_MX_STATE_WAIT_CONN_CNF;
+        return;
+
+    case RFC_MX_EVENT_START_RSP:
+    case RFC_MX_EVENT_CONN_CNF:
+    case RFC_MX_EVENT_CONF_IND:
+    case RFC_MX_EVENT_CONF_CNF:
+        RFCOMM_TRACE_ERROR2 ("Mx error state %d event %d", p_mcb->state, event);
+        return;
+
+    case RFC_MX_EVENT_CONN_IND:
+
+        rfc_timer_start (p_mcb, RFCOMM_CONN_TIMEOUT);
+        L2CA_ConnectRsp (p_mcb->bd_addr, *((UINT8 *)p_data), p_mcb->lcid, L2CAP_CONN_OK, 0);
+
+        rfc_mx_send_config_req (p_mcb);
+
+        p_mcb->state = RFC_MX_STATE_CONFIGURE;
+        return;
+
+    case RFC_EVENT_SABME:
+        break;
+
+    case RFC_EVENT_UA:
+    case RFC_EVENT_DM:
+        return;
+
+    case RFC_EVENT_DISC:
+        rfc_send_dm (p_mcb, RFCOMM_MX_DLCI, TRUE);
+        return;
+
+    case RFC_EVENT_UIH:
+        rfc_send_dm (p_mcb, RFCOMM_MX_DLCI, FALSE);
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_wait_conn_cnf
+**
+** Description      This function handles events when the multiplexer is
+**                  waiting for Connection Confirm from L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_wait_conn_cnf (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_wait_conn_cnf - evt:%d", event);
+    switch (event)
+    {
+    case RFC_MX_EVENT_START_REQ:
+        RFCOMM_TRACE_ERROR2 ("Mx error state %d event %d", p_mcb->state, event);
+        return;
+
+    /* There is some new timing so that Config Ind comes before security is completed
+       so we are still waiting fo the confirmation. */
+    case RFC_MX_EVENT_CONF_IND:
+        rfc_mx_conf_ind (p_mcb, (tL2CAP_CFG_INFO *)p_data);
+        return;
+
+    case RFC_MX_EVENT_CONN_CNF:
+        if (*((UINT16 *)p_data) != L2CAP_SUCCESS)
+        {
+            p_mcb->state = RFC_MX_STATE_IDLE;
+
+            PORT_StartCnf (p_mcb, *((UINT16 *)p_data));
+            return;
+        }
+        p_mcb->state = RFC_MX_STATE_CONFIGURE;
+        rfc_mx_send_config_req (p_mcb);
+        return;
+
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        L2CA_DisconnectReq (p_mcb->lcid);
+
+        /* we gave up outgoing connection request then try peer's request */
+        if (p_mcb->pending_lcid)
+        {
+            UINT16 i;
+            UINT8  idx;
+
+            RFCOMM_TRACE_DEBUG2 ("RFCOMM MX retry as acceptor in collision case - evt:%d in state:%d", event, p_mcb->state);
+
+            rfc_save_lcid_mcb (NULL, p_mcb->lcid);
+            p_mcb->lcid = p_mcb->pending_lcid;
+            rfc_save_lcid_mcb (p_mcb, p_mcb->lcid);
+
+            p_mcb->is_initiator = FALSE;
+
+            /* update direction bit */
+            for (i = 0; i < RFCOMM_MAX_DLCI; i += 2)
+            {
+                if ((idx = p_mcb->port_inx[i]) != 0)
+                {
+                    p_mcb->port_inx[i] = 0;
+                    p_mcb->port_inx[i+1] = idx;
+                    rfc_cb.port.port[idx - 1].dlci += 1;
+                    RFCOMM_TRACE_DEBUG2 ("RFCOMM MX - DLCI:%d -> %d", i, rfc_cb.port.port[idx - 1].dlci);
+                }
+            }
+
+            rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CONN_IND, &(p_mcb->pending_id));
+        }
+        else
+        {
+            PORT_CloseInd (p_mcb);
+        }
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_configure
+**
+** Description      This function handles events when the multiplexer in the
+**                  configuration state.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_configure (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_configure - evt:%d", event);
+    switch (event)
+    {
+    case RFC_MX_EVENT_START_REQ:
+    case RFC_MX_EVENT_CONN_CNF:
+
+        RFCOMM_TRACE_ERROR2 ("Mx error state %d event %d", p_mcb->state, event);
+        return;
+
+    case RFC_MX_EVENT_CONF_IND:
+        rfc_mx_conf_ind (p_mcb, (tL2CAP_CFG_INFO *)p_data);
+        return;
+
+    case RFC_MX_EVENT_CONF_CNF:
+        rfc_mx_conf_cnf (p_mcb, (tL2CAP_CFG_INFO *)p_data);
+        return;
+
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        L2CA_DisconnectReq (p_mcb->lcid);
+
+        PORT_StartCnf (p_mcb, RFCOMM_ERROR);
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_sabme_wait_ua
+**
+** Description      This function handles events when the multiplexer sent
+**                  SABME and is waiting for UA reply.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_sabme_wait_ua (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_sabme_wait_ua - evt:%d", event);
+    switch (event)
+    {
+    case RFC_MX_EVENT_START_REQ:
+    case RFC_MX_EVENT_CONN_CNF:
+        RFCOMM_TRACE_ERROR2 ("Mx error state %d event %d", p_mcb->state, event);
+        return;
+
+    /* workaround: we don't support reconfig */
+    /* commented out until we support reconfig
+    case RFC_MX_EVENT_CONF_IND:
+        rfc_mx_conf_ind (p_mcb, (tL2CAP_CFG_INFO *)p_data);
+        return;
+
+    case RFC_MX_EVENT_CONF_CNF:
+        rfc_mx_conf_cnf (p_mcb, (tL2CAP_CFG_INFO *)p_data);
+        return;
+    */
+
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_EVENT_UA:
+        rfc_timer_stop (p_mcb);
+
+        p_mcb->state      = RFC_MX_STATE_CONNECTED;
+        p_mcb->peer_ready = TRUE;
+
+        PORT_StartCnf (p_mcb, RFCOMM_SUCCESS);
+        return;
+
+    case RFC_EVENT_DM:
+        rfc_timer_stop (p_mcb);
+        /* Case falls through */
+
+    case RFC_MX_EVENT_CONF_IND: /* workaround: we don't support reconfig */
+    case RFC_MX_EVENT_CONF_CNF: /* workaround: we don't support reconfig */
+    case RFC_EVENT_TIMEOUT:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        L2CA_DisconnectReq (p_mcb->lcid);
+
+        PORT_StartCnf (p_mcb, RFCOMM_ERROR);
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_wait_sabme
+**
+** Description      This function handles events when the multiplexer is
+**                  waiting for SABME on the acceptor side after configuration
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_wait_sabme (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_wait_sabme - evt:%d", event);
+    switch (event)
+    {
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_EVENT_SABME:
+        /* if we gave up outgoing connection request */
+        if (p_mcb->pending_lcid)
+        {
+            p_mcb->pending_lcid = 0;
+
+            rfc_send_ua (p_mcb, RFCOMM_MX_DLCI);
+
+            rfc_timer_stop (p_mcb);
+            p_mcb->state      = RFC_MX_STATE_CONNECTED;
+            p_mcb->peer_ready = TRUE;
+
+            /* MX channel collision has been resolved, continue to open ports */
+            PORT_StartCnf (p_mcb, RFCOMM_SUCCESS);
+        }
+        else
+        {
+            rfc_timer_stop (p_mcb);
+            PORT_StartInd (p_mcb);
+        }
+        return;
+
+    case RFC_MX_EVENT_START_RSP:
+        if (*((UINT16 *)p_data) != RFCOMM_SUCCESS)
+            rfc_send_dm (p_mcb, RFCOMM_MX_DLCI, TRUE);
+        else
+        {
+            rfc_send_ua (p_mcb, RFCOMM_MX_DLCI);
+
+            p_mcb->state      = RFC_MX_STATE_CONNECTED;
+            p_mcb->peer_ready = TRUE;
+        }
+        return;
+
+    case RFC_MX_EVENT_CONF_IND: /* workaround: we don't support reconfig */
+    case RFC_MX_EVENT_CONF_CNF: /* workaround: we don't support reconfig */
+    case RFC_EVENT_TIMEOUT:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        L2CA_DisconnectReq (p_mcb->lcid);
+
+        PORT_CloseInd (p_mcb);
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_connected
+**
+** Description      This function handles events when the multiplexer is
+**                  in the CONNECTED state
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_connected (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_connected - evt:%d", event);
+
+    switch (event)
+    {
+    case RFC_EVENT_TIMEOUT:
+    case RFC_MX_EVENT_CLOSE_REQ:
+        rfc_timer_start (p_mcb, RFC_DISC_TIMEOUT);
+        p_mcb->state = RFC_MX_STATE_DISC_WAIT_UA;
+        rfc_send_disc (p_mcb, RFCOMM_MX_DLCI);
+        return;
+
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_EVENT_DISC:
+        /* Reply with UA.  If initiator bring down L2CAP connection */
+        /* If server wait for some time if client decide to reinitiate channel */
+        rfc_send_ua (p_mcb, RFCOMM_MX_DLCI);
+        if (p_mcb->is_initiator)
+        {
+            L2CA_DisconnectReq (p_mcb->lcid);
+        }
+        /* notify all ports that connection is gone */
+        PORT_CloseInd (p_mcb);
+        return;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_sm_state_disc_wait_ua
+**
+** Description      This function handles events when the multiplexer sent
+**                  DISC and is waiting for UA reply.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_mx_sm_state_disc_wait_ua (tRFC_MCB *p_mcb, UINT16 event, void *p_data)
+{
+    BT_HDR *p_buf;
+
+    RFCOMM_TRACE_EVENT1 ("rfc_mx_sm_state_disc_wait_ua - evt:%d", event);
+    switch (event)
+    {
+    case RFC_EVENT_UA:
+    case RFC_EVENT_DM:
+    case RFC_EVENT_TIMEOUT:
+        L2CA_DisconnectReq (p_mcb->lcid);
+
+        if (p_mcb->restart_required)
+        {
+            /* Start Request was received while disconnecting.  Execute it again */
+            if ((p_mcb->lcid = L2CA_ConnectReq (BT_PSM_RFCOMM, p_mcb->bd_addr)) == 0)
+            {
+                PORT_StartCnf (p_mcb, RFCOMM_ERROR);
+                return;
+            }
+            /* Save entry for quicker access to mcb based on the LCID */
+            rfc_save_lcid_mcb (p_mcb, p_mcb->lcid);
+
+            /* clean up before reuse it */
+            while ((p_buf = (BT_HDR *)GKI_dequeue(&p_mcb->cmd_q)) != NULL)
+                GKI_freebuf(p_buf);
+
+            rfc_timer_start (p_mcb, RFC_MCB_INIT_INACT_TIMER);
+
+            p_mcb->is_initiator     = TRUE;
+            p_mcb->restart_required = FALSE;
+            p_mcb->local_cfg_sent   = FALSE;
+            p_mcb->peer_cfg_rcvd    = FALSE;
+
+            p_mcb->state = RFC_MX_STATE_WAIT_CONN_CNF;
+            return;
+        }
+        rfc_release_multiplexer_channel (p_mcb);
+        return;
+
+    case RFC_EVENT_DISC:
+        rfc_send_ua (p_mcb, RFCOMM_MX_DLCI);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        rfc_send_dm (p_mcb, RFCOMM_MX_DLCI, FALSE);
+        return;
+
+    case RFC_MX_EVENT_START_REQ:
+        p_mcb->restart_required = TRUE;
+        return;
+
+    case RFC_MX_EVENT_DISC_IND:
+        p_mcb->state = RFC_MX_STATE_IDLE;
+        PORT_CloseInd (p_mcb);
+        return;
+
+    case RFC_MX_EVENT_CLOSE_REQ:
+        return;
+
+    case RFC_MX_EVENT_QOS_VIOLATION_IND:
+        break;
+    }
+    RFCOMM_TRACE_EVENT2 ("RFCOMM MX ignored - evt:%d in state:%d", event, p_mcb->state);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_send_config_req
+**
+** Description      This function handles L2CA_ConnectInd message from the
+**                  L2CAP.  Accept connection.
+**
+*******************************************************************************/
+static void rfc_mx_send_config_req (tRFC_MCB *p_mcb)
+{
+    tL2CAP_CFG_INFO cfg;
+
+    RFCOMM_TRACE_EVENT0 ("rfc_mx_send_config_req");
+
+    memset (&cfg, 0, sizeof (tL2CAP_CFG_INFO));
+
+    cfg.mtu_present      = TRUE;
+    cfg.mtu              = L2CAP_MTU_SIZE;
+
+/* Defaults set by memset
+    cfg.flush_to_present = FALSE;
+    cfg.qos_present      = FALSE;
+    cfg.fcr_present      = FALSE;
+    cfg.fcr.mode         = L2CAP_FCR_BASIC_MODE;
+    cfg.fcs_present      = FALSE;
+    cfg.fcs              = N/A when fcs_present is FALSE;
+*/
+    L2CA_ConfigReq (p_mcb->lcid, &cfg);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_conf_cnf
+**
+** Description      This function handles L2CA_ConfigCnf message from the
+**                  L2CAP.  If result is not success tell upper layer that
+**                  start has not been accepted.  If initiator send SABME
+**                  on DLCI 0.  T1 is still running.
+**
+*******************************************************************************/
+static void rfc_mx_conf_cnf (tRFC_MCB *p_mcb, tL2CAP_CFG_INFO *p_cfg)
+{
+    RFCOMM_TRACE_EVENT2 ("rfc_mx_conf_cnf p_cfg:%08x res:%d ", p_cfg, (p_cfg) ? p_cfg->result : 0);
+
+    if (p_cfg->result != L2CAP_CFG_OK)
+    {
+        if (p_mcb->is_initiator)
+        {
+            PORT_StartCnf (p_mcb, p_cfg->result);
+            L2CA_DisconnectReq (p_mcb->lcid);
+        }
+        rfc_release_multiplexer_channel (p_mcb);
+        return;
+    }
+
+    p_mcb->local_cfg_sent = TRUE;
+    if ((p_mcb->state == RFC_MX_STATE_CONFIGURE) && p_mcb->peer_cfg_rcvd)
+    {
+        if (p_mcb->is_initiator)
+        {
+            p_mcb->state = RFC_MX_STATE_SABME_WAIT_UA;
+            rfc_send_sabme (p_mcb, RFCOMM_MX_DLCI);
+            rfc_timer_start (p_mcb, RFC_T1_TIMEOUT);
+        }
+        else
+        {
+            p_mcb->state = RFC_MX_STATE_WAIT_SABME;
+            rfc_timer_start (p_mcb, RFC_T2_TIMEOUT);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_mx_conf_ind
+**
+** Description      This function handles L2CA_ConfigInd message from the
+**                  L2CAP.  Send the L2CA_ConfigRsp message.
+**
+*******************************************************************************/
+static void rfc_mx_conf_ind (tRFC_MCB *p_mcb, tL2CAP_CFG_INFO *p_cfg)
+{
+    /* Save peer L2CAP MTU if present */
+    /* RFCOMM adds 3-4 bytes in the beginning and 1 bytes FCS */
+    if (p_cfg->mtu_present)
+        p_mcb->peer_l2cap_mtu = p_cfg->mtu - RFCOMM_MIN_OFFSET - 1;
+    else
+        p_mcb->peer_l2cap_mtu = L2CAP_DEFAULT_MTU - RFCOMM_MIN_OFFSET - 1;
+
+    p_cfg->mtu_present      = FALSE;
+    p_cfg->flush_to_present = FALSE;
+    p_cfg->qos_present      = FALSE;
+
+    p_cfg->result = L2CAP_CFG_OK;
+
+    L2CA_ConfigRsp (p_mcb->lcid, p_cfg);
+
+    p_mcb->peer_cfg_rcvd = TRUE;
+    if ((p_mcb->state == RFC_MX_STATE_CONFIGURE) && p_mcb->local_cfg_sent)
+    {
+        if (p_mcb->is_initiator)
+        {
+            p_mcb->state = RFC_MX_STATE_SABME_WAIT_UA;
+            rfc_send_sabme (p_mcb, RFCOMM_MX_DLCI);
+            rfc_timer_start (p_mcb, RFC_T1_TIMEOUT);
+        }
+        else
+        {
+            p_mcb->state = RFC_MX_STATE_WAIT_SABME;
+            rfc_timer_start (p_mcb, RFC_T2_TIMEOUT);
+        }
+    }
+}
diff --git a/stack/rfcomm/rfc_port_fsm.c b/stack/rfcomm/rfc_port_fsm.c
new file mode 100644
index 0000000..d5335ad
--- /dev/null
+++ b/stack/rfcomm/rfc_port_fsm.c
@@ -0,0 +1,915 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains state machine and action routines for a port of the
+ *  RFCOMM unit
+ *
+ ******************************************************************************/
+#include <string.h>
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "btm_api.h"
+#include "btm_int.h"
+#include "port_api.h"
+#include "port_int.h"
+#include "rfc_int.h"
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void rfc_port_sm_state_closed (tPORT *p_port, UINT16 event, void *p_data);
+static void rfc_port_sm_sabme_wait_ua (tPORT *p_port, UINT16 event, void *p_data);
+static void rfc_port_sm_opened (tPORT *p_port, UINT16 event, void *p_data);
+static void rfc_port_sm_orig_wait_sec_check (tPORT *p_port, UINT16 event, void *p_data);
+static void rfc_port_sm_term_wait_sec_check (tPORT *p_port, UINT16 event, void *p_data);
+static void rfc_port_sm_disc_wait_ua (tPORT *p_port, UINT16 event, void *p_data);
+
+static void rfc_port_uplink_data (tPORT *p_port, BT_HDR *p_buf);
+
+static void rfc_set_port_state(tPORT_STATE *port_pars, MX_FRAME *p_frame);
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_execute
+**
+** Description      This function sends port events through the state
+**                  machine.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_execute (tPORT *p_port, UINT16 event, void *p_data)
+{
+    if (!p_port)
+    {
+        RFCOMM_TRACE_WARNING1 ("NULL port event %d", event);
+        return;
+    }
+
+    switch (p_port->rfc.state)
+    {
+    case RFC_STATE_CLOSED:
+        rfc_port_sm_state_closed (p_port, event, p_data);
+        break;
+
+    case RFC_STATE_SABME_WAIT_UA:
+        rfc_port_sm_sabme_wait_ua (p_port, event, p_data);
+        break;
+
+    case RFC_STATE_ORIG_WAIT_SEC_CHECK:
+        rfc_port_sm_orig_wait_sec_check (p_port, event, p_data);
+        break;
+
+    case RFC_STATE_TERM_WAIT_SEC_CHECK:
+        rfc_port_sm_term_wait_sec_check (p_port, event, p_data);
+        break;
+
+    case RFC_STATE_OPENED:
+        rfc_port_sm_opened (p_port, event, p_data);
+        break;
+
+    case RFC_STATE_DISC_WAIT_UA:
+        rfc_port_sm_disc_wait_ua (p_port, event, p_data);
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_state_closed
+**
+** Description      This function handles events when the port is in
+**                  CLOSED state. This state exists when port is
+**                  being initially established.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_state_closed (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_OPEN:
+        p_port->rfc.state = RFC_STATE_ORIG_WAIT_SEC_CHECK;
+        btm_sec_mx_access_request (p_port->rfc.p_mcb->bd_addr, BT_PSM_RFCOMM, TRUE,
+                                   BTM_SEC_PROTO_RFCOMM, (UINT32)(p_port->dlci / 2),
+                                   &rfc_sec_check_complete, p_port);
+        return;
+
+    case RFC_EVENT_CLOSE:
+        break;
+
+    case RFC_EVENT_CLEAR:
+        return;
+
+    case RFC_EVENT_DATA:
+        GKI_freebuf (p_data);
+        break;
+
+    case RFC_EVENT_SABME:
+        /* make sure the multiplexer disconnect timer is not running (reconnect case) */
+        rfc_timer_stop(p_port->rfc.p_mcb );
+
+        /* Open will be continued after security checks are passed */
+        p_port->rfc.state = RFC_STATE_TERM_WAIT_SEC_CHECK;
+        btm_sec_mx_access_request (p_port->rfc.p_mcb->bd_addr, BT_PSM_RFCOMM, FALSE,
+                                   BTM_SEC_PROTO_RFCOMM, (UINT32)(p_port->dlci / 2),
+                                   &rfc_sec_check_complete, p_port);
+        return;
+
+    case RFC_EVENT_UA:
+        return;
+
+    case RFC_EVENT_DM:
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, FALSE);
+        return;
+
+    case RFC_EVENT_DISC:
+        rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, FALSE);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        Port_TimeOutCloseMux( p_port->rfc.p_mcb ) ;
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+    }
+
+    RFCOMM_TRACE_WARNING1 ("Port state closed Event ignored %d", event);
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_sabme_wait_ua
+**
+** Description      This function handles events when SABME on the DLC was
+**                  sent and SM is waiting for UA or DM.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_sabme_wait_ua (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_OPEN:
+    case RFC_EVENT_ESTABLISH_RSP:
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+
+    case RFC_EVENT_CLOSE:
+        rfc_port_timer_start (p_port, RFC_DISC_TIMEOUT);
+        rfc_send_disc (p_port->rfc.p_mcb, p_port->dlci);
+        p_port->rfc.expected_rsp = 0;
+        p_port->rfc.state = RFC_STATE_DISC_WAIT_UA;
+        return;
+
+    case RFC_EVENT_CLEAR:
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DATA:
+        GKI_freebuf (p_data);
+        break;
+
+    case RFC_EVENT_UA:
+        rfc_port_timer_stop (p_port);
+        p_port->rfc.state = RFC_STATE_OPENED;
+        PORT_DlcEstablishCnf (p_port->rfc.p_mcb, p_port->dlci, p_port->rfc.p_mcb->peer_l2cap_mtu, RFCOMM_SUCCESS);
+        return;
+
+    case RFC_EVENT_DM:
+        p_port->rfc.p_mcb->is_disc_initiator = TRUE;
+        PORT_DlcEstablishCnf (p_port->rfc.p_mcb, p_port->dlci, p_port->rfc.p_mcb->peer_l2cap_mtu, RFCOMM_ERROR);
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DISC:
+        rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+        PORT_DlcEstablishCnf (p_port->rfc.p_mcb, p_port->dlci, p_port->rfc.p_mcb->peer_l2cap_mtu, RFCOMM_ERROR);
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_SABME:
+        /* Continue to wait for the UA the SABME this side sent */
+        rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        p_port->rfc.state = RFC_STATE_CLOSED;
+        PORT_DlcEstablishCnf (p_port->rfc.p_mcb, p_port->dlci, p_port->rfc.p_mcb->peer_l2cap_mtu, RFCOMM_ERROR);
+        return;
+    }
+    RFCOMM_TRACE_WARNING1 ("Port state sabme_wait_ua Event ignored %d", event);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_term_wait_sec_check
+**
+** Description      This function handles events for the port in the
+**                  WAIT_SEC_CHECK state.  SABME has been received from the
+**                  peer and Security Manager verifes BD_ADDR, before we can
+**                  send ESTABLISH_IND to the Port entity
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_term_wait_sec_check (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_SEC_COMPLETE:
+        if (*((UINT8 *)p_data) != BTM_SUCCESS)
+        {
+            /* Authentication/authorization failed.  If link is still  */
+            /* up send DM and check if we need to start inactive timer */
+            if (p_port->rfc.p_mcb)
+            {
+                rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, TRUE);
+                p_port->rfc.p_mcb->is_disc_initiator = TRUE;
+                port_rfc_closed (p_port, PORT_SEC_FAILED);
+            }
+        }
+        else
+        {
+            PORT_DlcEstablishInd (p_port->rfc.p_mcb, p_port->dlci, p_port->rfc.p_mcb->peer_l2cap_mtu);
+        }
+        return;
+
+    case RFC_EVENT_OPEN:
+    case RFC_EVENT_CLOSE:
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+
+    case RFC_EVENT_CLEAR:
+        btm_sec_abort_access_req (p_port->rfc.p_mcb->bd_addr);
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DATA:
+        RFCOMM_TRACE_ERROR0 ("Port error state Term Wait Sec event Data");
+        GKI_freebuf (p_data);
+        return;
+
+    case RFC_EVENT_SABME:
+        /* Ignore SABME retransmission if client dares to do so */
+        return;
+
+    case RFC_EVENT_DISC:
+        btm_sec_abort_access_req (p_port->rfc.p_mcb->bd_addr);
+        p_port->rfc.state = RFC_STATE_CLOSED;
+        rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+
+        PORT_DlcReleaseInd (p_port->rfc.p_mcb, p_port->dlci);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        return;
+
+    case RFC_EVENT_ESTABLISH_RSP:
+        if (*((UINT8 *)p_data) != RFCOMM_SUCCESS)
+        {
+            if (p_port->rfc.p_mcb)
+                rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, TRUE);
+        }
+        else
+        {
+            rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+            p_port->rfc.state = RFC_STATE_OPENED;
+        }
+        return;
+    }
+    RFCOMM_TRACE_WARNING1 ("Port state term_wait_sec_check Event ignored %d", event);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_orig_wait_sec_check
+**
+** Description      This function handles events for the port in the
+**                  ORIG_WAIT_SEC_CHECK state.  RFCOMM is waiting for Security
+**                  manager to finish before sending SABME to the peer
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_orig_wait_sec_check (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_SEC_COMPLETE:
+        if (*((UINT8 *)p_data) != BTM_SUCCESS)
+        {
+            p_port->rfc.p_mcb->is_disc_initiator = TRUE;
+            PORT_DlcEstablishCnf (p_port->rfc.p_mcb, p_port->dlci, 0, RFCOMM_SECURITY_ERR);
+            rfc_port_closed (p_port);
+            return;
+        }
+        rfc_send_sabme (p_port->rfc.p_mcb, p_port->dlci);
+        rfc_port_timer_start (p_port, RFC_PORT_T1_TIMEOUT);
+        p_port->rfc.state = RFC_STATE_SABME_WAIT_UA;
+        return;
+
+    case RFC_EVENT_OPEN:
+    case RFC_EVENT_SABME:       /* Peer should not use the same dlci */
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+
+    case RFC_EVENT_CLOSE:
+        btm_sec_abort_access_req (p_port->rfc.p_mcb->bd_addr);
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DATA:
+        RFCOMM_TRACE_ERROR0 ("Port error state Orig Wait Sec event Data");
+        GKI_freebuf (p_data);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        return;
+    }
+    RFCOMM_TRACE_WARNING1 ("Port state orig_wait_sec_check Event ignored %d", event);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_opened
+**
+** Description      This function handles events for the port in the OPENED
+**                  state
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_opened (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_OPEN:
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+
+    case RFC_EVENT_CLOSE:
+        rfc_port_timer_start (p_port, RFC_DISC_TIMEOUT);
+        rfc_send_disc (p_port->rfc.p_mcb, p_port->dlci);
+        p_port->rfc.expected_rsp = 0;
+        p_port->rfc.state = RFC_STATE_DISC_WAIT_UA;
+        return;
+
+    case RFC_EVENT_CLEAR:
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DATA:
+        /* Send credits in the frame.  Pass them in the layer specific member of the hdr. */
+        /* There might be an initial case when we reduced rx_max and credit_rx is still */
+        /* bigger.  Make sure that we do not send 255 */
+        if ((p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
+         && (((BT_HDR *)p_data)->len < p_port->peer_mtu)
+         && (!p_port->rx.user_fc)
+         && (p_port->credit_rx_max > p_port->credit_rx))
+        {
+            ((BT_HDR *)p_data)->layer_specific = (UINT8) (p_port->credit_rx_max - p_port->credit_rx);
+            p_port->credit_rx = p_port->credit_rx_max;
+        }
+        else
+        {
+            ((BT_HDR *)p_data)->layer_specific = 0;
+        }
+        rfc_send_buf_uih (p_port->rfc.p_mcb, p_port->dlci, (BT_HDR *)p_data);
+        rfc_dec_credit (p_port);
+        return;
+
+    case RFC_EVENT_UA:
+        return;
+
+    case RFC_EVENT_SABME:
+        rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+        return;
+
+    case RFC_EVENT_DM:
+        PORT_DlcReleaseInd (p_port->rfc.p_mcb, p_port->dlci);
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DISC:
+        p_port->rfc.state = RFC_STATE_CLOSED;
+        rfc_send_ua (p_port->rfc.p_mcb, p_port->dlci);
+        if(p_port->rx.queue.count)
+        {
+            /* give a chance to upper stack to close port properly */
+            RFCOMM_TRACE_DEBUG0("port queue is not empty");
+            rfc_port_timer_start (p_port, RFC_DISC_TIMEOUT);
+        }
+        else
+            PORT_DlcReleaseInd (p_port->rfc.p_mcb, p_port->dlci);
+        return;
+
+    case RFC_EVENT_UIH:
+        rfc_port_uplink_data (p_port, (BT_HDR *)p_data);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        Port_TimeOutCloseMux( p_port->rfc.p_mcb ) ;
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+    }
+    RFCOMM_TRACE_WARNING1 ("Port state opened Event ignored %d", event);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_sm_disc_wait_ua
+**
+** Description      This function handles events when DISC on the DLC was
+**                  sent and SM is waiting for UA or DM.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_sm_disc_wait_ua (tPORT *p_port, UINT16 event, void *p_data)
+{
+    switch (event)
+    {
+    case RFC_EVENT_OPEN:
+    case RFC_EVENT_ESTABLISH_RSP:
+        RFCOMM_TRACE_ERROR2 ("Port error state %d event %d", p_port->rfc.state, event);
+        return;
+
+    case RFC_EVENT_CLEAR:
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_DATA:
+        GKI_freebuf (p_data);
+        return;
+
+    case RFC_EVENT_UA:
+        p_port->rfc.p_mcb->is_disc_initiator = TRUE;
+        /* Case falls through */
+
+   case RFC_EVENT_DM:
+        rfc_port_closed (p_port);
+        return;
+
+    case RFC_EVENT_SABME:
+        rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, TRUE);
+        return;
+
+    case RFC_EVENT_DISC:
+        rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, TRUE);
+        return;
+
+    case RFC_EVENT_UIH:
+        GKI_freebuf (p_data);
+        rfc_send_dm (p_port->rfc.p_mcb, p_port->dlci, FALSE);
+        return;
+
+    case RFC_EVENT_TIMEOUT:
+        rfc_port_closed (p_port);
+        return;
+    }
+
+    RFCOMM_TRACE_WARNING1 ("Port state disc_wait_ua Event ignored %d", event);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_uplink_data
+**
+** Description      This function handles uplink information data frame.
+**
+*******************************************************************************/
+void rfc_port_uplink_data (tPORT *p_port, BT_HDR *p_buf)
+{
+    PORT_DataInd (p_port->rfc.p_mcb, p_port->dlci, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_pn
+**
+** Description      This function handles DLC parameter negotiation frame.
+**                  Record MTU and pass indication to the upper layer.
+**
+*******************************************************************************/
+void rfc_process_pn (tRFC_MCB *p_mcb, BOOLEAN is_command, MX_FRAME *p_frame)
+{
+    tPORT *p_port;
+    UINT8 dlci = p_frame->dlci;
+
+    if (is_command)
+    {
+        /* Ignore if Multiplexer is being shut down */
+        if (p_mcb->state != RFC_MX_STATE_DISC_WAIT_UA)
+        {
+            PORT_ParNegInd (p_mcb, dlci, p_frame->u.pn.mtu,
+                        p_frame->u.pn.conv_layer, p_frame->u.pn.k);
+        }
+        else
+        {
+            rfc_send_dm(p_mcb, dlci, FALSE);
+            RFCOMM_TRACE_WARNING0("***** MX PN while disconnecting *****");
+        }
+
+        return;
+    }
+    /* If we are not awaiting response just ignore it */
+    p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    if ((p_port == NULL) || !(p_port->rfc.expected_rsp & RFC_RSP_PN))
+        return;
+
+    p_port->rfc.expected_rsp &= ~RFC_RSP_PN;
+
+    rfc_port_timer_stop (p_port);
+
+    PORT_ParNegCnf (p_mcb, dlci, p_frame->u.pn.mtu,
+                    p_frame->u.pn.conv_layer, p_frame->u.pn.k);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_rpn
+**
+** Description      This function handles Remote DLC parameter negotiation
+**                  command/response.  Pass command to the user.
+**
+*******************************************************************************/
+void rfc_process_rpn (tRFC_MCB *p_mcb, BOOLEAN is_command,
+                      BOOLEAN is_request, MX_FRAME *p_frame)
+{
+    tPORT_STATE port_pars;
+    tPORT       *p_port;
+
+    if ((p_port = port_find_mcb_dlci_port (p_mcb, p_frame->dlci)) == NULL)
+    {
+        /* This is the first command on the port */
+        if (is_command)
+        {
+
+            memset(&port_pars, 0, sizeof(tPORT_STATE));
+            rfc_set_port_state(&port_pars, p_frame);
+
+            PORT_PortNegInd(p_mcb, p_frame->dlci, &port_pars, p_frame->u.rpn.param_mask);
+        }
+        return;
+    }
+
+    if (is_command && is_request)
+    {
+        /* This is the special situation when peer just request local pars */
+        port_pars = p_port->peer_port_pars;
+        rfc_send_rpn (p_mcb, p_frame->dlci, FALSE, &p_port->peer_port_pars, 0);
+        return;
+    }
+
+    port_pars = p_port->peer_port_pars;
+
+    rfc_set_port_state(&port_pars, p_frame);
+
+    if (is_command)
+    {
+        PORT_PortNegInd (p_mcb, p_frame->dlci, &port_pars, p_frame->u.rpn.param_mask);
+        return;
+    }
+
+    /* If we are not awaiting response just ignore it */
+    p_port = port_find_mcb_dlci_port (p_mcb, p_frame->dlci);
+    if ((p_port == NULL) || !(p_port->rfc.expected_rsp & (RFC_RSP_RPN | RFC_RSP_RPN_REPLY)))
+        return;
+
+    /* If we sent a request for port parameters to the peer he is replying with */
+    /* mask 0. */
+    rfc_port_timer_stop (p_port);
+
+    if (p_port->rfc.expected_rsp & RFC_RSP_RPN_REPLY)
+    {
+        p_port->rfc.expected_rsp &= ~RFC_RSP_RPN_REPLY;
+
+        p_port->peer_port_pars = port_pars;
+
+        if ((port_pars.fc_type == (RFCOMM_FC_RTR_ON_INPUT | RFCOMM_FC_RTR_ON_OUTPUT))
+         || (port_pars.fc_type == (RFCOMM_FC_RTC_ON_INPUT | RFCOMM_FC_RTC_ON_OUTPUT)))
+        {
+            /* This is satisfactory port parameters.  Set mask as it was Ok */
+            p_frame->u.rpn.param_mask = RFCOMM_RPN_PM_MASK;
+        }
+        else
+        {
+            /* Current peer parameters are not good, try to fix them */
+            p_port->peer_port_pars.fc_type = (RFCOMM_FC_RTR_ON_INPUT | RFCOMM_FC_RTR_ON_OUTPUT);
+
+            p_port->rfc.expected_rsp |= RFC_RSP_RPN;
+            rfc_send_rpn (p_mcb, p_frame->dlci, TRUE, &p_port->peer_port_pars,
+                          RFCOMM_RPN_PM_RTR_ON_INPUT | RFCOMM_RPN_PM_RTR_ON_OUTPUT);
+            rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+            return;
+        }
+    }
+    else
+        p_port->rfc.expected_rsp &= ~RFC_RSP_RPN;
+
+    /* Check if all suggested parameters were accepted */
+    if (((p_frame->u.rpn.param_mask & (RFCOMM_RPN_PM_RTR_ON_INPUT | RFCOMM_RPN_PM_RTR_ON_OUTPUT)) ==
+        (RFCOMM_RPN_PM_RTR_ON_INPUT | RFCOMM_RPN_PM_RTR_ON_OUTPUT))
+     || ((p_frame->u.rpn.param_mask & (RFCOMM_RPN_PM_RTC_ON_INPUT | RFCOMM_RPN_PM_RTC_ON_OUTPUT)) ==
+        (RFCOMM_RPN_PM_RTC_ON_INPUT | RFCOMM_RPN_PM_RTC_ON_OUTPUT)))
+    {
+        PORT_PortNegCnf (p_mcb, p_port->dlci, &port_pars, RFCOMM_SUCCESS);
+        return;
+    }
+
+    /* If we were proposing RTR flow control try RTC flow control */
+    /* If we were proposing RTC flow control try no flow control */
+    /* otherwise drop the connection */
+    if (p_port->peer_port_pars.fc_type == (RFCOMM_FC_RTR_ON_INPUT | RFCOMM_FC_RTR_ON_OUTPUT))
+    {
+        /* Current peer parameters are not good, try to fix them */
+        p_port->peer_port_pars.fc_type = (RFCOMM_FC_RTC_ON_INPUT | RFCOMM_FC_RTC_ON_OUTPUT);
+
+        p_port->rfc.expected_rsp |= RFC_RSP_RPN;
+
+        rfc_send_rpn (p_mcb, p_frame->dlci, TRUE, &p_port->peer_port_pars,
+                      RFCOMM_RPN_PM_RTC_ON_INPUT | RFCOMM_RPN_PM_RTC_ON_OUTPUT);
+        rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+        return;
+    }
+
+    /* Other side does not support flow control */
+    if (p_port->peer_port_pars.fc_type == (RFCOMM_FC_RTC_ON_INPUT | RFCOMM_FC_RTC_ON_OUTPUT))
+    {
+        p_port->peer_port_pars.fc_type = RFCOMM_FC_OFF;
+        PORT_PortNegCnf (p_mcb, p_port->dlci, &port_pars, RFCOMM_SUCCESS);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_msc
+**
+** Description      This function handles Modem Status Command.
+**                  Pass command to the user.
+**
+*******************************************************************************/
+void rfc_process_msc (tRFC_MCB *p_mcb, BOOLEAN is_command, MX_FRAME *p_frame)
+{
+    tPORT_CTRL pars;
+    tPORT      *p_port;
+    UINT8      modem_signals = p_frame->u.msc.signals;
+    BOOLEAN    new_peer_fc = FALSE;
+
+    p_port = port_find_mcb_dlci_port (p_mcb, p_frame->dlci);
+    if (p_port == NULL)
+        return;
+
+    pars.modem_signal = 0;
+
+    if (modem_signals & RFCOMM_MSC_RTC)
+        pars.modem_signal |= MODEM_SIGNAL_DTRDSR;
+
+    if (modem_signals & RFCOMM_MSC_RTR)
+        pars.modem_signal |= MODEM_SIGNAL_RTSCTS;
+
+    if (modem_signals & RFCOMM_MSC_IC)
+        pars.modem_signal |= MODEM_SIGNAL_RI;
+
+    if (modem_signals & RFCOMM_MSC_DV)
+        pars.modem_signal |= MODEM_SIGNAL_DCD;
+
+    pars.fc = ((modem_signals & RFCOMM_MSC_FC) == RFCOMM_MSC_FC);
+
+    pars.break_signal     = (p_frame->u.msc.break_present) ?
+                             p_frame->u.msc.break_duration : 0;
+    pars.discard_buffers  = 0;
+    pars.break_signal_seq = RFCOMM_CTRL_BREAK_IN_SEQ;   /* this is default */
+
+    /* Check if this command is passed only to indicate flow control */
+    if (is_command)
+    {
+        rfc_send_msc (p_mcb, p_frame->dlci, FALSE, &pars);
+
+        if (p_port->rfc.p_mcb->flow != PORT_FC_CREDIT)
+        {
+            /* Spec 1.1 indicates that only FC bit is used for flow control */
+            p_port->peer_ctrl.fc = new_peer_fc = pars.fc;
+
+            if (new_peer_fc != p_port->tx.peer_fc)
+                PORT_FlowInd (p_mcb, p_frame->dlci, (BOOLEAN)!new_peer_fc);
+        }
+
+        PORT_ControlInd (p_mcb, p_frame->dlci, &pars);
+
+        return;
+    }
+
+    /* If we are not awaiting response just ignore it */
+    if (!(p_port->rfc.expected_rsp & RFC_RSP_MSC))
+        return;
+
+    p_port->rfc.expected_rsp &= ~RFC_RSP_MSC;
+
+    rfc_port_timer_stop (p_port);
+
+    PORT_ControlCnf (p_port->rfc.p_mcb, p_port->dlci, &pars);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_rls
+**
+** Description      This function handles Remote Line Status command.
+**                  Pass command to the user.
+**
+*******************************************************************************/
+void rfc_process_rls (tRFC_MCB *p_mcb, BOOLEAN is_command, MX_FRAME *p_frame)
+{
+    tPORT *p_port;
+
+    if (is_command)
+    {
+        PORT_LineStatusInd (p_mcb, p_frame->dlci, p_frame->u.rls.line_status);
+        rfc_send_rls (p_mcb, p_frame->dlci, FALSE, p_frame->u.rls.line_status);
+    }
+    else
+    {
+        p_port = port_find_mcb_dlci_port (p_mcb, p_frame->dlci);
+
+        /* If we are not awaiting response just ignore it */
+        if (!p_port || !(p_port->rfc.expected_rsp & RFC_RSP_RLS))
+            return;
+
+        p_port->rfc.expected_rsp &= ~RFC_RSP_RLS;
+
+        rfc_port_timer_stop (p_port);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_nsc
+**
+** Description      This function handles None Supported Command frame.
+**
+*******************************************************************************/
+void rfc_process_nsc (tRFC_MCB *p_mcb, MX_FRAME *p_frame)
+{
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_test
+**
+** Description      This function handles Test frame.  If this is a command
+**                  reply to it.  Otherwise pass response to the user.
+**
+*******************************************************************************/
+void rfc_process_test_rsp (tRFC_MCB *p_mcb, BT_HDR *p_buf)
+{
+    GKI_freebuf (p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_fcon
+**
+** Description      This function handles FCON frame.  The peer entity is able
+**                  to receive new information
+**
+*******************************************************************************/
+void rfc_process_fcon (tRFC_MCB *p_mcb, BOOLEAN is_command)
+{
+    if (is_command)
+    {
+        rfc_cb.rfc.peer_rx_disabled = FALSE;
+
+        rfc_send_fcon (p_mcb, FALSE);
+
+        if (!p_mcb->l2cap_congested)
+            PORT_FlowInd (p_mcb, 0, TRUE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         rfc_process_fcoff
+**
+** Description      This function handles FCOFF frame.  The peer entity is unable
+**                  to receive new information
+**
+*******************************************************************************/
+void rfc_process_fcoff (tRFC_MCB *p_mcb, BOOLEAN is_command)
+{
+    if (is_command)
+    {
+        rfc_cb.rfc.peer_rx_disabled = TRUE;
+
+        if (!p_mcb->l2cap_congested)
+            PORT_FlowInd (p_mcb, 0, FALSE);
+
+        rfc_send_fcoff (p_mcb, FALSE);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_l2cap_congestion
+**
+** Description      This function handles L2CAP congestion messages
+**
+*******************************************************************************/
+void rfc_process_l2cap_congestion (tRFC_MCB *p_mcb, BOOLEAN is_congested)
+{
+    p_mcb->l2cap_congested = is_congested;
+
+    if (!is_congested)
+    {
+        rfc_check_send_cmd(p_mcb, NULL);
+    }
+
+    if (!rfc_cb.rfc.peer_rx_disabled)
+    {
+        if (!is_congested)
+            PORT_FlowInd (p_mcb, 0, TRUE);
+        else
+            PORT_FlowInd (p_mcb, 0, FALSE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         rfc_set_port_pars
+**
+** Description      This function sets the tPORT_STATE structure given a p_frame.
+**
+*******************************************************************************/
+
+void rfc_set_port_state(tPORT_STATE *port_pars, MX_FRAME *p_frame)
+{
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_BIT_RATE)
+        port_pars->baud_rate   = p_frame->u.rpn.baud_rate;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_DATA_BITS)
+        port_pars->byte_size   = p_frame->u.rpn.byte_size;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_STOP_BITS)
+        port_pars->stop_bits   = p_frame->u.rpn.stop_bits;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_PARITY)
+        port_pars->parity      = p_frame->u.rpn.parity;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_PARITY_TYPE)
+        port_pars->parity_type = p_frame->u.rpn.parity_type;
+    if (p_frame->u.rpn.param_mask & (RFCOMM_RPN_PM_XONXOFF_ON_INPUT |
+                                     RFCOMM_RPN_PM_XONXOFF_ON_OUTPUT |
+                                     RFCOMM_RPN_PM_RTR_ON_INPUT |
+                                     RFCOMM_RPN_PM_RTR_ON_OUTPUT |
+                                     RFCOMM_RPN_PM_RTC_ON_INPUT |
+                                     RFCOMM_RPN_PM_RTC_ON_OUTPUT))
+        port_pars->fc_type     = p_frame->u.rpn.fc_type;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_XON_CHAR)
+        port_pars->xon_char    = p_frame->u.rpn.xon_char;
+    if (p_frame->u.rpn.param_mask & RFCOMM_RPN_PM_XOFF_CHAR)
+        port_pars->xoff_char   = p_frame->u.rpn.xoff_char;
+}
+
diff --git a/stack/rfcomm/rfc_port_if.c b/stack/rfcomm/rfc_port_if.c
new file mode 100644
index 0000000..083d9ef
--- /dev/null
+++ b/stack/rfcomm/rfc_port_if.c
@@ -0,0 +1,339 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ * This file contains functions callable by an application
+ * running on top of RFCOMM
+ *
+ *****************************************************************************/
+
+#include <string.h>
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "l2c_api.h"
+#include "port_int.h"
+#include "rfc_int.h"
+
+
+#if RFC_DYNAMIC_MEMORY == FALSE
+tRFC_CB rfc_cb;
+#endif
+
+/*******************************************************************************
+**
+** Function         RFCOMM_StartReq
+**
+** Description      This function handles Start Request from the upper layer.
+**                  If RFCOMM multiplexer channel can not be allocated
+**                  send start not accepted confirmation.  Otherwise dispatch
+**                  start event to the state machine.
+**
+*******************************************************************************/
+void RFCOMM_StartReq (tRFC_MCB *p_mcb)
+{
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_START_REQ, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_StartRsp
+**
+** Description      This function handles Start Response from the upper layer.
+**                  Save upper layer handle and result of the Start Indication
+**                  in the control block and dispatch event to the FSM.
+**
+*******************************************************************************/
+void RFCOMM_StartRsp (tRFC_MCB *p_mcb, UINT16 result)
+{
+    rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_START_RSP, &result);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_DlcEstablishReq
+**
+** Description      This function is called by the user app to establish
+**                  connection with the specific dlci on a specific bd device.
+**                  It will allocate RFCOMM connection control block if not
+**                  allocated before and dispatch open event to the state
+**                  machine.
+**
+*******************************************************************************/
+void RFCOMM_DlcEstablishReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if (p_mcb->state != RFC_MX_STATE_CONNECTED)
+    {
+        PORT_DlcEstablishCnf (p_mcb, dlci, 0, RFCOMM_ERROR);
+        return;
+    }
+
+    rfc_port_sm_execute(p_port, RFC_EVENT_OPEN, NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_DlcEstablishRsp
+**
+** Description      This function is called by the port emulation entity
+**                  acks Establish Indication.
+**
+*******************************************************************************/
+void RFCOMM_DlcEstablishRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT16 result)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if ((p_mcb->state != RFC_MX_STATE_CONNECTED) && (result == RFCOMM_SUCCESS))
+    {
+        PORT_DlcReleaseInd (p_mcb, dlci);
+        return;
+    }
+
+    rfc_port_sm_execute(p_port, RFC_EVENT_ESTABLISH_RSP, &result);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ParNegReq
+**
+** Description      This function is called by the user app to start
+**                  DLC parameter negotiation.  Port emulation can send this
+**                  request before actually establishing the DLC.  In this
+**                  case the function will allocate RFCOMM connection control
+**                  block.
+**
+*******************************************************************************/
+void RFCOMM_ParNegReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+    UINT8 flow;
+    UINT8 cl;
+    UINT8 k;
+
+    if (p_mcb->state != RFC_MX_STATE_CONNECTED)
+    {
+        p_port->error = PORT_PAR_NEG_FAILED;
+        return;
+    }
+
+    /* Negotiate the flow control mechanism.  If flow control mechanism for */
+    /* mux has not been set yet, use our default value.  If it has been set, */
+    /* use that value. */
+    flow = (p_mcb->flow == PORT_FC_UNDEFINED) ? PORT_FC_DEFAULT : p_mcb->flow;
+
+    /* Set convergence layer and number of credits (k) */
+    if (flow == PORT_FC_CREDIT)
+    {
+        cl = RFCOMM_PN_CONV_LAYER_CBFC_I;
+        k = (p_port->credit_rx_max < RFCOMM_K_MAX) ? p_port->credit_rx_max : RFCOMM_K_MAX;
+        p_port->credit_rx = k;
+    }
+    else
+    {
+        cl = RFCOMM_PN_CONV_LAYER_TYPE_1;
+        k = 0;
+    }
+
+    /* Send Parameter Negotiation Command UIH frame */
+    p_port->rfc.expected_rsp |= RFC_RSP_PN;
+
+    rfc_send_pn (p_mcb, dlci, TRUE, mtu, cl, k);
+
+    rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ParNegRsp
+**
+** Description      This function is called by the user app to acknowledge
+**                  DLC parameter negotiation.
+**
+*******************************************************************************/
+void RFCOMM_ParNegRsp (tRFC_MCB *p_mcb, UINT8 dlci, UINT16 mtu, UINT8 cl, UINT8 k)
+{
+    if (p_mcb->state != RFC_MX_STATE_CONNECTED)
+        return;
+
+    /* Send Parameter Negotiation Response UIH frame */
+    rfc_send_pn (p_mcb, dlci, FALSE, mtu, cl, k);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_PortNegReq
+**
+** Description      This function is called by the user app to start
+**                  Remote Port parameter negotiation.  Port emulation can
+**                  send this request before actually establishing the DLC.
+**                  In this case the function will allocate RFCOMM connection
+**                  control block.
+**
+*******************************************************************************/
+void RFCOMM_PortNegReq (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if (p_mcb->state != RFC_MX_STATE_CONNECTED)
+    {
+        PORT_PortNegCnf (p_mcb, dlci, NULL, RFCOMM_ERROR);
+        return;
+    }
+
+    /* Send Parameter Negotiation Command UIH frame */
+    if (!p_pars)
+        p_port->rfc.expected_rsp |= RFC_RSP_RPN_REPLY;
+    else
+        p_port->rfc.expected_rsp |= RFC_RSP_RPN;
+
+    rfc_send_rpn (p_mcb, dlci, TRUE, p_pars, RFCOMM_RPN_PM_MASK);
+    rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_PortNegRsp
+**
+** Description      This function is called by the user app to acknowledge
+**                  Port parameters negotiation.
+**
+*******************************************************************************/
+void RFCOMM_PortNegRsp (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_STATE *p_pars,
+                        UINT16 param_mask)
+{
+    if (p_mcb->state != RFC_MX_STATE_CONNECTED)
+        return;
+
+   rfc_send_rpn (p_mcb, dlci, FALSE, p_pars, param_mask);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_ControlReq
+**
+** Description      This function is called by the port entity to send control
+**                  parameters to remote port emulation entity.
+**
+*******************************************************************************/
+void RFCOMM_ControlReq (tRFC_MCB *p_mcb, UINT8 dlci, tPORT_CTRL *p_pars)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if ((p_port->state != PORT_STATE_OPENED)
+     || (p_port->rfc.state  != RFC_STATE_OPENED))
+        return;
+
+    p_port->port_ctrl |= PORT_CTRL_REQ_SENT;
+
+    p_port->rfc.expected_rsp |= RFC_RSP_MSC;
+
+    rfc_send_msc (p_mcb, dlci, TRUE, p_pars);
+    rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_FlowReq
+**
+** Description      This function is called by the port entity when flow
+**                  control state has changed.  Enable flag passed shows if
+**                  port can accept more data.
+**
+*******************************************************************************/
+void RFCOMM_FlowReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 enable)
+{
+    tPORT      *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if ((p_port->state != PORT_STATE_OPENED)
+     || (p_port->rfc.state  != RFC_STATE_OPENED))
+        return;
+
+    p_port->local_ctrl.fc = !enable;
+
+    p_port->rfc.expected_rsp |= RFC_RSP_MSC;
+
+    rfc_send_msc (p_mcb, dlci, TRUE, &p_port->local_ctrl);
+    rfc_port_timer_start (p_port, RFC_T2_TIMEOUT) ;
+
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_LineStatusReq
+**
+** Description      This function is called by the port entity when line
+**                  status should be delivered to the peer.
+**
+*******************************************************************************/
+void RFCOMM_LineStatusReq (tRFC_MCB *p_mcb, UINT8 dlci, UINT8 status)
+{
+    tPORT *p_port = port_find_mcb_dlci_port (p_mcb, dlci);
+
+    if ((p_port->state != PORT_STATE_OPENED)
+     || (p_port->rfc.state  != RFC_STATE_OPENED))
+        return;
+
+    p_port->rfc.expected_rsp |= RFC_RSP_RLS;
+
+    rfc_send_rls (p_mcb, dlci, TRUE, status);
+    rfc_port_timer_start (p_port, RFC_T2_TIMEOUT);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_DlcReleaseReq
+**
+** Description      This function is called by the PORT unit to close DLC
+**
+*******************************************************************************/
+void RFCOMM_DlcReleaseReq (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    rfc_port_sm_execute(port_find_mcb_dlci_port (p_mcb, dlci), RFC_EVENT_CLOSE, 0);
+}
+
+
+/*******************************************************************************
+**
+** Function         RFCOMM_DataReq
+**
+** Description      This function is called by the user app to send data buffer
+**
+*******************************************************************************/
+void RFCOMM_DataReq (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf)
+{
+    rfc_port_sm_execute(port_find_mcb_dlci_port (p_mcb, dlci), RFC_EVENT_DATA, p_buf);
+}
+
+
diff --git a/stack/rfcomm/rfc_ts_frames.c b/stack/rfcomm/rfc_ts_frames.c
new file mode 100644
index 0000000..4690200
--- /dev/null
+++ b/stack/rfcomm/rfc_ts_frames.c
@@ -0,0 +1,908 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions to send TS 07.10 frames
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+#include "gki.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "l2c_api.h"
+#include "port_int.h"
+#include "rfc_int.h"
+
+/*******************************************************************************
+**
+** Function         rfc_send_sabme
+**
+** Description      This function sends SABME frame.
+**
+*******************************************************************************/
+void rfc_send_sabme (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+    UINT8   cr = RFCOMM_CR(p_mcb->is_initiator, TRUE);
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_data = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* SABME frame, command, PF = 1, dlci */
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_SABME | RFCOMM_PF;
+    *p_data++ = RFCOMM_EA | 0;
+
+    *p_data   = RFCOMM_SABME_FCS ((UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET, cr, dlci);
+
+    p_buf->len = 4;
+
+    rfc_check_send_cmd(p_mcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_ua
+**
+** Description      This function sends UA frame.
+**
+*******************************************************************************/
+void rfc_send_ua (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+    UINT8   cr = RFCOMM_CR(p_mcb->is_initiator, FALSE);
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_data = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* ua frame, response, PF = 1, dlci */
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_UA | RFCOMM_PF;
+    *p_data++ = RFCOMM_EA | 0;
+
+    *p_data   = RFCOMM_UA_FCS ((UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET, cr, dlci);
+
+    p_buf->len = 4;
+
+    rfc_check_send_cmd(p_mcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_dm
+**
+** Description      This function sends DM frame.
+**
+*******************************************************************************/
+void rfc_send_dm (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN pf)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+    UINT8   cr = RFCOMM_CR(p_mcb->is_initiator, FALSE);
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_data = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* DM frame, response, PF = 1, dlci */
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_DM | ((pf) ? RFCOMM_PF : 0);
+    *p_data++ = RFCOMM_EA | 0;
+
+    *p_data   = RFCOMM_DM_FCS ((UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET, cr, dlci);
+
+    p_buf->len = 4;
+
+    rfc_check_send_cmd(p_mcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_disc
+**
+** Description      This function sends DISC frame.
+**
+*******************************************************************************/
+void rfc_send_disc (tRFC_MCB *p_mcb, UINT8 dlci)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+    UINT8   cr = RFCOMM_CR(p_mcb->is_initiator, TRUE);
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_data = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* DISC frame, command, PF = 1, dlci */
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_DISC | RFCOMM_PF;
+    *p_data++ = RFCOMM_EA | 0;
+
+    *p_data   = RFCOMM_DISC_FCS ((UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET, cr, dlci);
+
+    p_buf->len = 4;
+
+    rfc_check_send_cmd(p_mcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_buf_uih
+**
+** Description      This function sends UIH frame.
+**
+*******************************************************************************/
+void rfc_send_buf_uih (tRFC_MCB *p_mcb, UINT8 dlci, BT_HDR *p_buf)
+{
+    UINT8   *p_data;
+    UINT8   cr = RFCOMM_CR(p_mcb->is_initiator, TRUE);
+    UINT8   credits;
+
+    p_buf->offset -= RFCOMM_CTRL_FRAME_LEN;
+    if (p_buf->len > 127)
+        p_buf->offset--;
+
+    if (dlci)
+        credits = (UINT8)p_buf->layer_specific;
+    else
+        credits = 0;
+
+    if (credits)
+        p_buf->offset--;
+
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    /* UIH frame, command, PF = 0, dlci */
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_UIH | ((credits) ? RFCOMM_PF : 0);
+    if (p_buf->len <= 127)
+    {
+        *p_data++   = RFCOMM_EA | (p_buf->len << 1);
+        p_buf->len += 3;
+    }
+    else
+    {
+        *p_data++   = (p_buf->len & 0x7f) << 1;
+        *p_data++   = p_buf->len >> RFCOMM_SHIFT_LENGTH2;
+        p_buf->len += 4;
+    }
+
+    if (credits)
+    {
+        *p_data++ = credits;
+        p_buf->len++;
+    }
+
+    p_data  = (UINT8 *)(p_buf + 1) + p_buf->offset + p_buf->len++;
+
+    *p_data = RFCOMM_UIH_FCS ((UINT8 *)(p_buf + 1) + p_buf->offset, dlci);
+
+    if (dlci == RFCOMM_MX_DLCI)
+    {
+        rfc_check_send_cmd(p_mcb, p_buf);
+    }
+    else
+    {
+
+        L2CA_DataWrite (p_mcb->lcid, p_buf);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_pn
+**
+** Description      This function sends DLC Parameters Negotiation Frame.
+**
+*******************************************************************************/
+void rfc_send_pn (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command, UINT16 mtu, UINT8 cl, UINT8 k)
+{
+    BT_HDR   *p_buf;
+    UINT8    *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_PN;
+    *p_data++ = RFCOMM_EA | (RFCOMM_MX_PN_LEN << 1);
+
+    *p_data++ = dlci;
+    *p_data++ = RFCOMM_PN_FRAM_TYPE_UIH | cl;
+
+    /* It appeared that we need to reply with the same priority bits as we received.
+    ** We will use the fact that we reply in the same context so rx_frame can still be used.
+    */
+    if (is_command)
+        *p_data++ = RFCOMM_PN_PRIORITY_0;
+    else
+        *p_data++ = rfc_cb.rfc.rx_frame.u.pn.priority;
+
+    *p_data++ = RFCOMM_T1_DSEC;
+    *p_data++ = mtu & 0xFF;
+    *p_data++ = mtu >> 8;
+    *p_data++ = RFCOMM_N2;
+    *p_data   = k;
+
+    /* Total length is sizeof PN data + mx header 2 */
+    p_buf->len = RFCOMM_MX_PN_LEN + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_fcon
+**
+** Description      This function sends Flow Control On Command.
+**
+*******************************************************************************/
+void rfc_send_fcon (tRFC_MCB *p_mcb, BOOLEAN is_command)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_FCON;
+    *p_data++ = RFCOMM_EA | (RFCOMM_MX_FCON_LEN << 1);
+
+    /* Total length is sizeof FCON data + mx header 2 */
+    p_buf->len = RFCOMM_MX_FCON_LEN + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_fcoff
+**
+** Description      This function sends Flow Control Off Command.
+**
+*******************************************************************************/
+void rfc_send_fcoff (tRFC_MCB *p_mcb, BOOLEAN is_command)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_FCOFF;
+    *p_data++ = RFCOMM_EA | (RFCOMM_MX_FCOFF_LEN << 1);
+
+    /* Total length is sizeof FCOFF data + mx header 2 */
+    p_buf->len = RFCOMM_MX_FCOFF_LEN + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_msc
+**
+** Description      This function sends Modem Status Command Frame.
+**
+*******************************************************************************/
+void rfc_send_msc (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command,
+                   tPORT_CTRL *p_pars)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+    UINT8   signals;
+    UINT8   break_duration;
+    UINT8   len;
+
+    signals        = p_pars->modem_signal;
+    break_duration = p_pars->break_signal;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    if (break_duration)
+        len = RFCOMM_MX_MSC_LEN_WITH_BREAK;
+    else
+        len = RFCOMM_MX_MSC_LEN_NO_BREAK;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_MSC;
+    *p_data++ = RFCOMM_EA | (len << 1);
+
+    *p_data++ = RFCOMM_EA | RFCOMM_CR_MASK | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_EA |
+                ((p_pars->fc)                    ? RFCOMM_MSC_FC : 0)  |
+                ((signals & MODEM_SIGNAL_DTRDSR) ? RFCOMM_MSC_RTC : 0) |
+                ((signals & MODEM_SIGNAL_RTSCTS) ? RFCOMM_MSC_RTR : 0) |
+                ((signals & MODEM_SIGNAL_RI)     ? RFCOMM_MSC_IC : 0)  |
+                ((signals & MODEM_SIGNAL_DCD)    ? RFCOMM_MSC_DV : 0);
+
+    if (break_duration)
+    {
+        *p_data++ = RFCOMM_EA | RFCOMM_MSC_BREAK_PRESENT_MASK |
+                    (break_duration << RFCOMM_MSC_SHIFT_BREAK);
+    }
+
+    /* Total length is sizeof MSC data + mx header 2 */
+    p_buf->len = len + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_rls
+**
+** Description      This function sends Remote Line Status Command Frame.
+**
+*******************************************************************************/
+void rfc_send_rls (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command, UINT8 status)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_RLS;
+    *p_data++ = RFCOMM_EA | (RFCOMM_MX_RLS_LEN << 1);
+
+    *p_data++ = RFCOMM_EA | RFCOMM_CR_MASK | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_RLS_ERROR | status;
+
+    /* Total length is sizeof RLS data + mx header 2 */
+    p_buf->len = RFCOMM_MX_RLS_LEN + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_nsc
+**
+** Description      This function sends Non Supported Command Response.
+**
+*******************************************************************************/
+void rfc_send_nsc (tRFC_MCB *p_mcb)
+{
+    BT_HDR  *p_buf;
+    UINT8   *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(FALSE) | RFCOMM_MX_NSC;
+    *p_data++ = RFCOMM_EA | (RFCOMM_MX_NSC_LEN << 1);
+
+    *p_data++ =  rfc_cb.rfc.rx_frame.ea |
+                (rfc_cb.rfc.rx_frame.cr << RFCOMM_SHIFT_CR) |
+                 rfc_cb.rfc.rx_frame.type;
+
+    /* Total length is sizeof NSC data + mx header 2 */
+    p_buf->len = RFCOMM_MX_NSC_LEN + 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_rpn
+**
+** Description      This function sends Remote Port Negotiation Command
+**
+*******************************************************************************/
+void rfc_send_rpn (tRFC_MCB *p_mcb, UINT8 dlci, BOOLEAN is_command,
+                   tPORT_STATE *p_pars, UINT16 mask)
+{
+    BT_HDR   *p_buf;
+    UINT8    *p_data;
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_CTRL_FRAME_LEN;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_RPN;
+
+    if (!p_pars)
+    {
+        *p_data++ = RFCOMM_EA | (RFCOMM_MX_RPN_REQ_LEN << 1);
+
+        *p_data++ = RFCOMM_EA | RFCOMM_CR_MASK | (dlci << RFCOMM_SHIFT_DLCI);
+
+        p_buf->len = RFCOMM_MX_RPN_REQ_LEN + 2;
+    }
+    else
+    {
+        *p_data++ = RFCOMM_EA | (RFCOMM_MX_RPN_LEN << 1);
+
+        *p_data++ = RFCOMM_EA | RFCOMM_CR_MASK | (dlci << RFCOMM_SHIFT_DLCI);
+        *p_data++ = p_pars->baud_rate;
+        *p_data++ =  (p_pars->byte_size << RFCOMM_RPN_BITS_SHIFT)
+                   | (p_pars->stop_bits << RFCOMM_RPN_STOP_BITS_SHIFT)
+                   | (p_pars->parity << RFCOMM_RPN_PARITY_SHIFT)
+                   | (p_pars->parity_type << RFCOMM_RPN_PARITY_TYPE_SHIFT);
+        *p_data++ = p_pars->fc_type;
+        *p_data++ = p_pars->xon_char;
+        *p_data++ = p_pars->xoff_char;
+        *p_data++ = (mask & 0xFF);
+        *p_data++ = (mask >> 8);
+
+        /* Total length is sizeof RPN data + mx header 2 */
+        p_buf->len = RFCOMM_MX_RPN_LEN + 2;
+    }
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_send_test
+**
+** Description      This function sends Test frame.
+**
+*******************************************************************************/
+void rfc_send_test (tRFC_MCB *p_mcb, BOOLEAN is_command, BT_HDR *p_buf)
+{
+    UINT8    *p_data;
+    UINT16   xx;
+    UINT8    *p_src, *p_dest;
+
+    /* Shift buffer to give space for header */
+    if (p_buf->offset < (L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET + 2))
+    {
+        p_src  = (UINT8 *) (p_buf + 1) + p_buf->offset + p_buf->len - 1;
+        p_dest = (UINT8 *) (p_buf + 1) + L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET + 2 + p_buf->len - 1;
+
+        for (xx = 0; xx < p_buf->len; xx++)
+            *p_dest-- = *p_src--;
+
+        p_buf->offset = L2CAP_MIN_OFFSET + RFCOMM_MIN_OFFSET + 2;
+    }
+
+    /* Adjust offset by number of bytes we are going to fill */
+    p_buf->offset -= 2;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | RFCOMM_I_CR(is_command) | RFCOMM_MX_TEST;
+    *p_data++ = RFCOMM_EA | (p_buf->len << 1);
+
+    p_buf->len += 2;
+
+    rfc_send_buf_uih (p_mcb, RFCOMM_MX_DLCI, p_buf);
+}
+
+/*******************************************************************************
+**
+** Function         rfc_send_credit
+**
+** Description      This function sends a flow control credit in UIH frame.
+**
+*******************************************************************************/
+void rfc_send_credit(tRFC_MCB *p_mcb, UINT8 dlci, UINT8 credit)
+{
+    BT_HDR   *p_buf;
+    UINT8    *p_data;
+    UINT8    cr = RFCOMM_CR(p_mcb->is_initiator, TRUE);
+
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (RFCOMM_CMD_POOL_ID)) == NULL)
+        return;
+
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+
+    *p_data++ = RFCOMM_EA | cr | (dlci << RFCOMM_SHIFT_DLCI);
+    *p_data++ = RFCOMM_UIH | RFCOMM_PF;
+    *p_data++ = RFCOMM_EA | 0;
+    *p_data++ = credit;
+    *p_data   = RFCOMM_UIH_FCS ((UINT8 *)(p_buf + 1) + p_buf->offset, dlci);
+
+    p_buf->len = 5;
+
+    rfc_check_send_cmd(p_mcb, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_parse_data
+**
+** Description      This function processes data packet received from L2CAP
+**
+*******************************************************************************/
+UINT8 rfc_parse_data (tRFC_MCB *p_mcb, MX_FRAME *p_frame, BT_HDR *p_buf)
+{
+    UINT8     ead, eal, fcs;
+    UINT8     *p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    UINT8     *p_start = p_data;
+    UINT16    len;
+
+    if (p_buf->len < RFCOMM_CTRL_FRAME_LEN)
+    {
+        RFCOMM_TRACE_ERROR1 ("Bad Length1: %d", p_buf->len);
+        return (RFC_EVENT_BAD_FRAME);
+    }
+
+    RFCOMM_PARSE_CTRL_FIELD (ead, p_frame->cr, p_frame->dlci, p_data);
+    if( !ead )
+    {
+        RFCOMM_TRACE_ERROR0 ("Bad Address(EA must be 1)");
+        return (RFC_EVENT_BAD_FRAME);
+    }
+    RFCOMM_PARSE_TYPE_FIELD (p_frame->type, p_frame->pf, p_data);
+    RFCOMM_PARSE_LEN_FIELD (eal, len, p_data);
+
+    p_buf->len      -= (3 + !ead + !eal + 1);  /* Additional 1 for FCS */
+    p_buf->offset   += (3 + !ead + !eal);
+
+    /* handle credit if credit based flow control */
+    if ((p_mcb->flow == PORT_FC_CREDIT) && (p_frame->type == RFCOMM_UIH) &&
+        (p_frame->dlci != RFCOMM_MX_DLCI) && (p_frame->pf == 1))
+    {
+        p_frame->credit = *p_data++;
+        p_buf->len--;
+        p_buf->offset++;
+    }
+    else
+        p_frame->credit = 0;
+
+    if (p_buf->len != len)
+    {
+        RFCOMM_TRACE_ERROR2 ("Bad Length2 %d %d", p_buf->len, len);
+        return (RFC_EVENT_BAD_FRAME);
+    }
+
+    fcs = *(p_data + len);
+
+    /* All control frames that we are sending are sent with P=1, expect */
+    /* reply with F=1 */
+    /* According to TS 07.10 spec ivalid frames are discarded without */
+    /* notification to the sender */
+    switch (p_frame->type)
+    {
+    case RFCOMM_SABME:
+        if (RFCOMM_FRAME_IS_RSP(p_mcb->is_initiator, p_frame->cr)
+         || !p_frame->pf || len || !RFCOMM_VALID_DLCI (p_frame->dlci)
+         || !rfc_check_fcs (RFCOMM_CTRL_FRAME_LEN, p_start, fcs))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad SABME");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else
+            return (RFC_EVENT_SABME);
+
+    case RFCOMM_UA:
+        if (RFCOMM_FRAME_IS_CMD(p_mcb->is_initiator, p_frame->cr)
+          || !p_frame->pf || len || !RFCOMM_VALID_DLCI (p_frame->dlci)
+          || !rfc_check_fcs (RFCOMM_CTRL_FRAME_LEN, p_start, fcs))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad UA");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else
+            return (RFC_EVENT_UA);
+
+    case RFCOMM_DM:
+        if (RFCOMM_FRAME_IS_CMD(p_mcb->is_initiator, p_frame->cr)
+         || len || !RFCOMM_VALID_DLCI(p_frame->dlci)
+         || !rfc_check_fcs (RFCOMM_CTRL_FRAME_LEN, p_start, fcs))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad DM");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else
+            return (RFC_EVENT_DM);
+
+    case RFCOMM_DISC:
+        if (RFCOMM_FRAME_IS_RSP(p_mcb->is_initiator, p_frame->cr)
+          || !p_frame->pf || len || !RFCOMM_VALID_DLCI(p_frame->dlci)
+          || !rfc_check_fcs (RFCOMM_CTRL_FRAME_LEN, p_start, fcs))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad DISC");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else
+            return (RFC_EVENT_DISC);
+
+    case RFCOMM_UIH:
+        if (!RFCOMM_VALID_DLCI(p_frame->dlci))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad UIH - invalid DLCI");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else if (!rfc_check_fcs (2, p_start, fcs))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad UIH - FCS");
+            return (RFC_EVENT_BAD_FRAME);
+        }
+        else if (RFCOMM_FRAME_IS_RSP(p_mcb->is_initiator, p_frame->cr))
+        {
+            /* we assume that this is ok to allow bad implementations to work */
+            RFCOMM_TRACE_ERROR0 ("Bad UIH - response");
+            return (RFC_EVENT_UIH);
+        }
+        else
+            return (RFC_EVENT_UIH);
+    }
+
+    return (RFC_EVENT_BAD_FRAME);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_process_mx_message
+**
+** Description      This function processes UIH frames received on the
+**                  multiplexer control channel.
+**
+*******************************************************************************/
+void rfc_process_mx_message (tRFC_MCB *p_mcb, BT_HDR *p_buf)
+{
+    UINT8       *p_data = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    MX_FRAME    *p_rx_frame = &rfc_cb.rfc.rx_frame;
+    UINT16       length  = p_buf->len;
+    UINT8        ea, cr, mx_len;
+    BOOLEAN      is_command;
+
+    p_rx_frame->ea   = *p_data & RFCOMM_EA;
+    p_rx_frame->cr   = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;
+    p_rx_frame->type = *p_data++ & ~(RFCOMM_CR_MASK | RFCOMM_EA_MASK);
+
+    if (!p_rx_frame->ea || !length)
+    {
+        RFCOMM_TRACE_ERROR2 ("Illegal MX Frame ea:%d len:%d", p_rx_frame->ea, length);
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    length--;
+
+    is_command = p_rx_frame->cr;
+
+    ea = *p_data & RFCOMM_EA;
+
+    mx_len = *p_data++ >> RFCOMM_SHIFT_LENGTH1;
+    length--;
+
+    if (!ea)
+    {
+        mx_len += *p_data++ << RFCOMM_SHIFT_LENGTH2;
+        length --;
+    }
+
+    if (mx_len != length)
+    {
+        RFCOMM_TRACE_ERROR0 ("Bad MX frame");
+        GKI_freebuf (p_buf);
+        return;
+    }
+
+    switch (p_rx_frame->type)
+    {
+    case RFCOMM_MX_PN:
+        if (length != RFCOMM_MX_PN_LEN)
+            break;
+
+        p_rx_frame->dlci            = *p_data++ & RFCOMM_PN_DLCI_MASK;
+        p_rx_frame->u.pn.frame_type = *p_data & RFCOMM_PN_FRAME_TYPE_MASK;
+        p_rx_frame->u.pn.conv_layer = *p_data++ & RFCOMM_PN_CONV_LAYER_MASK;
+        p_rx_frame->u.pn.priority   = *p_data++ & RFCOMM_PN_PRIORITY_MASK;
+        p_rx_frame->u.pn.t1         = *p_data++;
+        p_rx_frame->u.pn.mtu        = *p_data + (*(p_data + 1) << 8);
+        p_data += 2;
+        p_rx_frame->u.pn.n2         = *p_data++;
+        p_rx_frame->u.pn.k          = *p_data++ & RFCOMM_PN_K_MASK;
+
+        if (!p_rx_frame->dlci
+         || !RFCOMM_VALID_DLCI (p_rx_frame->dlci)
+         || (p_rx_frame->u.pn.mtu < RFCOMM_MIN_MTU)
+         || (p_rx_frame->u.pn.mtu > RFCOMM_MAX_MTU))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad PN frame");
+            break;
+        }
+
+        GKI_freebuf (p_buf);
+
+        rfc_process_pn (p_mcb, is_command, p_rx_frame);
+        return;
+
+    case RFCOMM_MX_TEST:
+        if (!length)
+            break;
+
+        p_rx_frame->u.test.p_data   = p_data;
+        p_rx_frame->u.test.data_len = length;
+
+        p_buf->offset += 2;
+        p_buf->len    -= 2;
+
+        if (is_command)
+            rfc_send_test (p_mcb, FALSE, p_buf);
+        else
+            rfc_process_test_rsp (p_mcb, p_buf);
+        return;
+
+    case RFCOMM_MX_FCON:
+        if (length != RFCOMM_MX_FCON_LEN)
+            break;
+
+        GKI_freebuf (p_buf);
+
+        rfc_process_fcon (p_mcb, is_command);
+        return;
+
+    case RFCOMM_MX_FCOFF:
+        if (length != RFCOMM_MX_FCOFF_LEN)
+            break;
+
+        GKI_freebuf (p_buf);
+
+        rfc_process_fcoff (p_mcb, is_command);
+        return;
+
+    case RFCOMM_MX_MSC:
+
+        ea                   = *p_data & RFCOMM_EA;
+        cr                   = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;
+        p_rx_frame->dlci = *p_data++ >> RFCOMM_SHIFT_DLCI;
+
+        if (!ea || !cr || !p_rx_frame->dlci
+         || !RFCOMM_VALID_DLCI (p_rx_frame->dlci))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad MSC frame");
+            break;
+        }
+
+        p_rx_frame->u.msc.signals        = *p_data++;
+
+        if (mx_len == RFCOMM_MX_MSC_LEN_WITH_BREAK)
+        {
+            p_rx_frame->u.msc.break_present  = *p_data & RFCOMM_MSC_BREAK_PRESENT_MASK;
+            p_rx_frame->u.msc.break_duration = (*p_data & RFCOMM_MSC_BREAK_MASK) >> RFCOMM_MSC_SHIFT_BREAK;
+        }
+        else
+        {
+            p_rx_frame->u.msc.break_present  = FALSE;
+            p_rx_frame->u.msc.break_duration = 0;
+        }
+        GKI_freebuf (p_buf);
+
+        rfc_process_msc (p_mcb, is_command, p_rx_frame);
+        return;
+
+    case RFCOMM_MX_NSC:
+        if ((length != RFCOMM_MX_NSC_LEN) || !is_command)
+            break;
+
+        p_rx_frame->u.nsc.ea   = *p_data & RFCOMM_EA;
+        p_rx_frame->u.nsc.cr   = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;
+        p_rx_frame->u.nsc.type = *p_data++ >> RFCOMM_SHIFT_DLCI;
+
+        GKI_freebuf (p_buf);
+
+        rfc_process_nsc (p_mcb, p_rx_frame);
+        return;
+
+    case RFCOMM_MX_RPN:
+        if ((length != RFCOMM_MX_RPN_REQ_LEN) && (length != RFCOMM_MX_RPN_LEN))
+            break;
+
+        ea                   = *p_data & RFCOMM_EA;
+        cr                   = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;
+        p_rx_frame->dlci = *p_data++ >> RFCOMM_SHIFT_DLCI;
+
+        if (!ea || !cr || !p_rx_frame->dlci
+         || !RFCOMM_VALID_DLCI (p_rx_frame->dlci))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad RPN frame");
+            break;
+        }
+
+        p_rx_frame->u.rpn.is_request  = (length == RFCOMM_MX_RPN_REQ_LEN);
+
+        if (!p_rx_frame->u.rpn.is_request)
+        {
+            p_rx_frame->u.rpn.baud_rate   = *p_data++;
+            p_rx_frame->u.rpn.byte_size   = (*p_data >> RFCOMM_RPN_BITS_SHIFT) & RFCOMM_RPN_BITS_MASK;
+            p_rx_frame->u.rpn.stop_bits   = (*p_data >> RFCOMM_RPN_STOP_BITS_SHIFT) & RFCOMM_RPN_STOP_BITS_MASK;
+            p_rx_frame->u.rpn.parity      = (*p_data >> RFCOMM_RPN_PARITY_SHIFT) & RFCOMM_RPN_PARITY_MASK;
+            p_rx_frame->u.rpn.parity_type = (*p_data++ >> RFCOMM_RPN_PARITY_TYPE_SHIFT) & RFCOMM_RPN_PARITY_TYPE_MASK;
+
+            p_rx_frame->u.rpn.fc_type     = *p_data++ & RFCOMM_FC_MASK;
+            p_rx_frame->u.rpn.xon_char    = *p_data++;
+            p_rx_frame->u.rpn.xoff_char   = *p_data++;
+            p_rx_frame->u.rpn.param_mask  = (*p_data + (*(p_data + 1) << 8)) & RFCOMM_RPN_PM_MASK;
+        }
+        GKI_freebuf (p_buf);
+
+        rfc_process_rpn (p_mcb, is_command, p_rx_frame->u.rpn.is_request, p_rx_frame);
+        return;
+
+    case RFCOMM_MX_RLS:
+        if (length != RFCOMM_MX_RLS_LEN)
+            break;
+
+        ea = *p_data & RFCOMM_EA;
+        cr = (*p_data & RFCOMM_CR_MASK) >> RFCOMM_SHIFT_CR;
+
+        p_rx_frame->dlci              = *p_data++ >> RFCOMM_SHIFT_DLCI;
+        p_rx_frame->u.rls.line_status = (*p_data & ~0x01);
+
+        if (!ea || !cr || !p_rx_frame->dlci
+         || !RFCOMM_VALID_DLCI (p_rx_frame->dlci))
+        {
+            RFCOMM_TRACE_ERROR0 ("Bad RPN frame");
+            break;
+        }
+
+        GKI_freebuf (p_buf);
+
+        rfc_process_rls (p_mcb, is_command, p_rx_frame);
+        return;
+    }
+
+    GKI_freebuf (p_buf);
+
+    if (is_command)
+        rfc_send_nsc (p_mcb);
+}
+
diff --git a/stack/rfcomm/rfc_utils.c b/stack/rfcomm/rfc_utils.c
new file mode 100644
index 0000000..49405ac
--- /dev/null
+++ b/stack/rfcomm/rfc_utils.c
@@ -0,0 +1,467 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  This file contains collection of utility functions used the RFCOMM unit
+ *
+ *****************************************************************************/
+
+#include "bt_target.h"
+#include "gki.h"
+
+#include "btm_api.h"
+#include "btm_int.h"
+#include "rfcdefs.h"
+#include "port_api.h"
+#include "port_ext.h"
+#include "port_int.h"
+#include "rfc_int.h"
+#include "btu.h"
+
+#include <string.h>
+
+/*******************************************************************************
+**
+** Function         rfc_calc_fcs
+**
+** Description      Reversed CRC Table , 8-bit, poly=0x07
+**                  (GSM 07.10 TS 101 369 V6.3.0)
+*******************************************************************************/
+static const UINT8 rfc_crctable[] =
+{
+    0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75,  0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
+    0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69,  0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
+    0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D,  0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
+    0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51,  0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
+
+    0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05,  0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
+    0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,  0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
+    0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D,  0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
+    0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21,  0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
+
+    0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95,  0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
+    0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89,  0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
+    0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD,  0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
+    0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1,  0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
+
+    0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5,  0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
+    0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9,  0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
+    0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD,  0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
+    0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1,  0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
+};
+
+
+/*******************************************************************************
+**
+** Function         rfc_calc_fcs
+**
+** Description      This function calculate FCS for the RFCOMM frame
+**                  (GSM 07.10 TS 101 369 V6.3.0)
+**
+** Input            len - number of bytes in the message
+**                  p   - points to message
+**
+*******************************************************************************/
+UINT8 rfc_calc_fcs (UINT16 len, UINT8 *p)
+{
+    UINT8  fcs = 0xFF;
+
+    while (len--)
+    {
+        fcs = rfc_crctable[fcs ^ *p++];
+    }
+
+    /* Ones compliment */
+    return (0xFF - fcs);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_check_fcs
+**
+** Description      This function checks FCS for the RFCOMM frame
+**                  (GSM 07.10 TS 101 369 V6.3.0)
+**
+** Input            len          - number of bytes in the message
+**                  p            - points to message
+**                  received_fcs - received FCS
+**
+*******************************************************************************/
+BOOLEAN rfc_check_fcs (UINT16 len, UINT8 *p, UINT8 received_fcs)
+{
+    UINT8  fcs = 0xFF;
+
+    while (len--)
+    {
+        fcs = rfc_crctable[fcs ^ *p++];
+    }
+
+    /* Ones compliment */
+    fcs = rfc_crctable[fcs ^ received_fcs];
+
+    /*0xCF is the reversed order of 11110011.*/
+    return (fcs == 0xCF);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_alloc_multiplexer_channel
+**
+** Description      This function returns existing or new control block for
+**                  the BD_ADDR.
+**
+*******************************************************************************/
+tRFC_MCB *rfc_alloc_multiplexer_channel (BD_ADDR bd_addr, BOOLEAN is_initiator)
+{
+    int i, j;
+    tRFC_MCB *p_mcb = NULL;
+
+    for (i = 0; i < MAX_BD_CONNECTIONS; i++)
+    {
+        if ((rfc_cb.port.rfc_mcb[i].state != RFC_MX_STATE_IDLE)
+         && (!memcmp (rfc_cb.port.rfc_mcb[i].bd_addr, bd_addr, BD_ADDR_LEN)))
+        {
+            /* Multiplexer channel found do not change anything */
+            /* If there was an inactivity timer running stop it now */
+            if (rfc_cb.port.rfc_mcb[i].state == RFC_MX_STATE_CONNECTED)
+                rfc_timer_stop (&rfc_cb.port.rfc_mcb[i]);
+            return (&rfc_cb.port.rfc_mcb[i]);
+        }
+    }
+
+    /* connection with bd_addr does not exist */
+    for (i = 0, j = rfc_cb.rfc.last_mux + 1; i < MAX_BD_CONNECTIONS; i++, j++)
+    {
+        if (j >= MAX_BD_CONNECTIONS)
+            j = 0;
+
+        p_mcb = &rfc_cb.port.rfc_mcb[j];
+        if (rfc_cb.port.rfc_mcb[j].state == RFC_MX_STATE_IDLE)
+        {
+            /* New multiplexer control block */
+            memset (p_mcb, 0, sizeof (tRFC_MCB));
+            memcpy (p_mcb->bd_addr, bd_addr, BD_ADDR_LEN);
+
+            GKI_init_q(&p_mcb->cmd_q);
+
+            p_mcb->is_initiator = is_initiator;
+
+            rfc_timer_start (p_mcb, RFC_MCB_INIT_INACT_TIMER);
+
+            rfc_cb.rfc.last_mux = (UINT8) j;
+            return (p_mcb);
+        }
+    }
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_release_multiplexer_channel
+**
+** Description      This function returns existing or new control block for
+**                  the BD_ADDR.
+**
+*******************************************************************************/
+void rfc_release_multiplexer_channel (tRFC_MCB *p_mcb)
+{
+    void    *p_buf;
+
+    rfc_timer_stop (p_mcb);
+
+    while ((p_buf = GKI_dequeue(&p_mcb->cmd_q)) != NULL)
+        GKI_freebuf(p_buf);
+
+    memset (p_mcb, 0, sizeof (tRFC_MCB));
+    p_mcb->state = RFC_MX_STATE_IDLE;
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_timer_start
+**
+** Description      Start RFC Timer
+**
+*******************************************************************************/
+void rfc_timer_start (tRFC_MCB *p_mcb, UINT16 timeout)
+{
+    TIMER_LIST_ENT *p_tle = &p_mcb->tle;
+
+    RFCOMM_TRACE_EVENT1 ("rfc_timer_start - timeout:%d", timeout);
+
+    p_tle->param = (UINT32)p_mcb;
+
+    btu_start_timer (p_tle, BTU_TTYPE_RFCOMM_MFC, timeout);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_timer_stop
+**
+** Description      Stop RFC Timer
+**
+*******************************************************************************/
+void rfc_timer_stop (tRFC_MCB *p_mcb)
+{
+    RFCOMM_TRACE_EVENT0 ("rfc_timer_stop");
+
+    btu_stop_timer (&p_mcb->tle);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_timer_start
+**
+** Description      Start RFC Timer
+**
+*******************************************************************************/
+void rfc_port_timer_start (tPORT *p_port, UINT16 timeout)
+{
+    TIMER_LIST_ENT *p_tle = &p_port->rfc.tle;
+
+    RFCOMM_TRACE_EVENT1 ("rfc_port_timer_start - timeout:%d", timeout);
+
+    p_tle->param = (UINT32)p_port;
+
+    btu_start_timer (p_tle, BTU_TTYPE_RFCOMM_PORT, timeout);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_timer_stop
+**
+** Description      Stop RFC Timer
+**
+*******************************************************************************/
+void rfc_port_timer_stop (tPORT *p_port)
+{
+    RFCOMM_TRACE_EVENT0 ("rfc_port_timer_stop");
+
+    btu_stop_timer (&p_port->rfc.tle);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_check_mcb_active
+**
+** Description      Check if there are any opened ports on the MCB if not
+**                  start MCB Inact timer.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_check_mcb_active (tRFC_MCB *p_mcb)
+{
+    UINT16 i;
+
+    for (i = 0; i < RFCOMM_MAX_DLCI; i++)
+    {
+        if (p_mcb->port_inx[i] != 0)
+        {
+            p_mcb->is_disc_initiator = FALSE;
+            return;
+        }
+    }
+    /* The last port was DISCed.  On the client side start disconnecting Mx */
+    /* On the server side start inactivity timer */
+    if (p_mcb->is_disc_initiator)
+    {
+        p_mcb->is_disc_initiator = FALSE;
+        rfc_mx_sm_execute (p_mcb, RFC_MX_EVENT_CLOSE_REQ, NULL);
+    }
+    else
+        rfc_timer_start (p_mcb, RFC_MCB_RELEASE_INACT_TIMER);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfcomm_process_timeout
+**
+** Description      The function called every second to check RFCOMM timers
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfcomm_process_timeout (TIMER_LIST_ENT  *p_tle)
+{
+    switch (p_tle->event)
+    {
+    case BTU_TTYPE_RFCOMM_MFC:
+        rfc_mx_sm_execute ((tRFC_MCB *)p_tle->param, RFC_EVENT_TIMEOUT, NULL);
+        break;
+
+    case BTU_TTYPE_RFCOMM_PORT:
+        rfc_port_sm_execute ((tPORT *)p_tle->param, RFC_EVENT_TIMEOUT, NULL);
+        break;
+
+    default:
+        break;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_sec_check_complete
+**
+** Description      The function called when Security Manager finishes
+**                  verification of the service side connection
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_sec_check_complete (BD_ADDR bd_addr, void *p_ref_data, UINT8 res)
+{
+    tPORT *p_port = (tPORT *)p_ref_data;
+
+    /* Verify that PORT is still waiting for Security to complete */
+    if (!p_port->in_use
+     || ((p_port->rfc.state != RFC_STATE_ORIG_WAIT_SEC_CHECK)
+      && (p_port->rfc.state != RFC_STATE_TERM_WAIT_SEC_CHECK)))
+        return;
+
+    rfc_port_sm_execute ((tPORT *)p_ref_data, RFC_EVENT_SEC_COMPLETE, &res);
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_port_closed
+**
+** Description      The function is called when port is released based on the
+**                  event received from the lower layer, typically L2CAP
+**                  connection down, DISC, or DM frame.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_port_closed (tPORT *p_port)
+{
+    tRFC_MCB *p_mcb = p_port->rfc.p_mcb;
+
+    RFCOMM_TRACE_DEBUG0 ("rfc_port_closed");
+
+    rfc_port_timer_stop (p_port);
+
+    p_port->rfc.state = RFC_STATE_CLOSED;
+
+    /* If multiplexer channel was up mark it as down */
+    if (p_mcb)
+    {
+        p_mcb->port_inx[p_port->dlci] = 0;
+
+        /* If there are no more ports opened on this MCB release it */
+        rfc_check_mcb_active (p_mcb);
+    }
+
+    /* Notify port that RFC connection is gone */
+    port_rfc_closed (p_port, PORT_CLOSED);
+}
+
+/*******************************************************************************
+**
+** Function         rfc_inc_credit
+**
+** Description      The function is called when a credit is received in a UIH
+**                  frame.  It increments the TX credit count, and if data
+**                  flow had halted, it restarts it.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_inc_credit (tPORT *p_port, UINT8 credit)
+{
+    if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
+    {
+        p_port->credit_tx += credit;
+
+        RFCOMM_TRACE_EVENT1 ("rfc_inc_credit:%d", p_port->credit_tx);
+
+        if (p_port->tx.peer_fc == TRUE)
+            PORT_FlowInd(p_port->rfc.p_mcb, p_port->dlci, TRUE);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         rfc_dec_credit
+**
+** Description      The function is called when a UIH frame of user data is
+**                  sent.  It decrements the credit count.  If credit count
+**                  Reaches zero, peer_fc is set.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_dec_credit (tPORT *p_port)
+{
+    if (p_port->rfc.p_mcb->flow == PORT_FC_CREDIT)
+    {
+        if (p_port->credit_tx > 0)
+            p_port->credit_tx--;
+
+        if (p_port->credit_tx == 0)
+            p_port->tx.peer_fc = TRUE;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         rfc_check_send_cmd
+**
+** Description      This function is called to send an RFCOMM command message
+**                  or to handle the RFCOMM command message queue.
+**
+** Returns          void
+**
+*******************************************************************************/
+void rfc_check_send_cmd(tRFC_MCB *p_mcb, BT_HDR *p_buf)
+{
+    BT_HDR  *p;
+
+    /* if passed a buffer queue it */
+    if (p_buf != NULL)
+    {
+        GKI_enqueue(&p_mcb->cmd_q, p_buf);
+    }
+
+    /* handle queue if L2CAP not congested */
+    while (p_mcb->l2cap_congested == FALSE)
+    {
+        if ((p = (BT_HDR *) GKI_dequeue(&p_mcb->cmd_q)) == NULL)
+        {
+            break;
+        }
+
+
+        L2CA_DataWrite (p_mcb->lcid, p);
+    }
+}
+
+
diff --git a/stack/sdp/sdp_api.c b/stack/sdp/sdp_api.c
new file mode 100644
index 0000000..4899aa8
--- /dev/null
+++ b/stack/sdp/sdp_api.c
@@ -0,0 +1,1475 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains SDP interface functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "sdp_api.h"
+#include "sdpint.h"
+#include "btu.h"
+
+#include <cutils/log.h>
+#define info(fmt, ...)  LOGI ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define debug(fmt, ...) LOGD ("%s: " fmt,__FUNCTION__,  ## __VA_ARGS__)
+#define error(fmt, ...) LOGE ("## ERROR : %s: " fmt "##",__FUNCTION__,  ## __VA_ARGS__)
+#define asrt(s) if(!(s)) LOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__)
+
+
+/**********************************************************************
+**   C L I E N T    F U N C T I O N    P R O T O T Y P E S            *
+***********************************************************************/
+
+/*******************************************************************************
+**
+** Function         SDP_InitDiscoveryDb
+**
+** Description      This function is called to initialize a discovery database.
+**
+** Parameters:      p_db        - (input) address of an area of memory where the
+**                                        discovery database is managed.
+**                  len         - (input) size (in bytes) of the memory
+**                                  NOTE: This must be larger than sizeof(tSDP_DISCOVERY_DB)
+**                  num_uuid    - (input) number of UUID filters applied
+**                  p_uuid_list - (input) list of UUID filters
+**                  num_attr    - (input) number of attribute filters applied
+**                  p_attr_list - (input) list of attribute filters
+**
+**
+** Returns          BOOLEAN
+**                          TRUE if successful
+**                          FALSE if one or more parameters are bad
+**
+*******************************************************************************/
+BOOLEAN SDP_InitDiscoveryDb (tSDP_DISCOVERY_DB *p_db, UINT32 len, UINT16 num_uuid,
+                             tSDP_UUID *p_uuid_list, UINT16 num_attr, UINT16 *p_attr_list)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    UINT16  xx;
+
+    /* verify the parameters */
+    if (p_db == NULL || (sizeof (tSDP_DISCOVERY_DB) > len) ||
+        num_attr > SDP_MAX_ATTR_FILTERS || num_uuid > SDP_MAX_UUID_FILTERS)
+    {
+        SDP_TRACE_ERROR4("SDP_InitDiscoveryDb Illegal param: p_db 0x%x, len %d, num_uuid %d, num_attr %d",
+                         (UINT32)p_db, len, num_uuid, num_attr);
+
+        return(FALSE);
+    }
+
+    memset (p_db, 0, (size_t)len);
+
+    p_db->mem_size = len - sizeof (tSDP_DISCOVERY_DB);
+    p_db->mem_free = p_db->mem_size;
+    p_db->p_first_rec = NULL;
+    p_db->p_free_mem = (UINT8 *)(p_db + 1);
+
+    for (xx = 0; xx < num_uuid; xx++)
+        p_db->uuid_filters[xx] = *p_uuid_list++;
+
+    p_db->num_uuid_filters = num_uuid;
+
+    for (xx = 0; xx < num_attr; xx++)
+        p_db->attr_filters[xx] = *p_attr_list++;
+
+    /* sort attributes */
+    sdpu_sort_attr_list( num_attr, p_db );
+
+    p_db->num_attr_filters = num_attr;
+#endif
+    return(TRUE);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         SDP_CancelServiceSearch
+**
+** Description      This function cancels an active query to an SDP server.
+**
+** Returns          TRUE if discovery cancelled, FALSE if a matching activity is not found.
+**
+*******************************************************************************/
+BOOLEAN SDP_CancelServiceSearch (tSDP_DISCOVERY_DB *p_db)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB     *p_ccb = sdpu_find_ccb_by_db (p_db);
+    if (!p_ccb)
+        return(FALSE);
+
+    sdp_disconnect (p_ccb, SDP_CANCEL);
+    p_ccb->disc_state = SDP_DISC_WAIT_CANCEL;
+#endif
+    return(TRUE);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchRequest
+**
+** Description      This function queries an SDP server for information.
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+BOOLEAN SDP_ServiceSearchRequest (UINT8 *p_bd_addr, tSDP_DISCOVERY_DB *p_db,
+                                  tSDP_DISC_CMPL_CB *p_cb)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB     *p_ccb;
+
+    /* Specific BD address */
+    p_ccb = sdp_conn_originate (p_bd_addr);
+
+    if (!p_ccb)
+        return(FALSE);
+
+    p_ccb->disc_state = SDP_DISC_WAIT_CONN;
+    p_ccb->p_db       = p_db;
+    p_ccb->p_cb       = p_cb;
+
+    return(TRUE);
+#else
+    return(FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchAttributeRequest
+**
+** Description      This function queries an SDP server for information.
+**
+**                  The difference between this API function and the function
+**                  SDP_ServiceSearchRequest is that this one does a
+**                  combined ServiceSearchAttributeRequest SDP function.
+**                  (This is for Unplug Testing)
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+BOOLEAN SDP_ServiceSearchAttributeRequest (UINT8 *p_bd_addr, tSDP_DISCOVERY_DB *p_db,
+                                           tSDP_DISC_CMPL_CB *p_cb)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB     *p_ccb;
+
+    /* Specific BD address */
+    p_ccb = sdp_conn_originate (p_bd_addr);
+
+    if (!p_ccb)
+        return(FALSE);
+
+    p_ccb->disc_state = SDP_DISC_WAIT_CONN;
+    p_ccb->p_db       = p_db;
+    p_ccb->p_cb       = p_cb;
+
+    p_ccb->is_attr_search = TRUE;
+
+    return(TRUE);
+#else
+    return(FALSE);
+#endif
+}
+/*******************************************************************************
+**
+** Function         SDP_ServiceSearchAttributeRequest2
+**
+** Description      This function queries an SDP server for information.
+**
+**                  The difference between this API function and the function
+**                  SDP_ServiceSearchRequest is that this one does a
+**                  combined ServiceSearchAttributeRequest SDP function.
+**                  (This is for Unplug Testing)
+**
+** Returns          TRUE if discovery started, FALSE if failed.
+**
+*******************************************************************************/
+BOOLEAN SDP_ServiceSearchAttributeRequest2 (UINT8 *p_bd_addr, tSDP_DISCOVERY_DB *p_db,
+                                            tSDP_DISC_CMPL_CB2 *p_cb2, void * user_data)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB     *p_ccb;
+
+    /* Specific BD address */
+    p_ccb = sdp_conn_originate (p_bd_addr);
+
+    if (!p_ccb)
+        return(FALSE);
+
+    p_ccb->disc_state = SDP_DISC_WAIT_CONN;
+    p_ccb->p_db       = p_db;
+    p_ccb->p_cb2       = p_cb2;
+
+    p_ccb->is_attr_search = TRUE;
+    p_ccb->user_data = user_data;
+
+    return(TRUE);
+#else
+    return(FALSE);
+#endif
+}
+
+#if SDP_CLIENT_ENABLED == TRUE
+void SDP_SetIdleTimeout (BD_ADDR addr, UINT16 timeout)
+{
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         SDP_FindAttributeInDb
+**
+** Description      This function queries an SDP database for a specific attribute.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to matching record, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_REC *SDP_FindAttributeInDb (tSDP_DISCOVERY_DB *p_db, UINT16 attr_id,
+                                      tSDP_DISC_REC *p_start_rec)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_REC   *p_rec;
+    tSDP_DISC_ATTR  *p_attr;
+
+    /* Must have a valid database */
+    if (p_db == NULL)
+        return(NULL);
+
+    if (!p_start_rec)
+        p_rec = p_db->p_first_rec;
+    else
+        p_rec = p_start_rec->p_next_rec;
+
+    while (p_rec)
+    {
+        p_attr = p_rec->p_first_attr;
+        while (p_attr)
+        {
+            if (p_attr->attr_id == attr_id)
+                return(p_rec);
+
+            p_attr = p_attr->p_next_attr;
+        }
+
+        p_rec = p_rec->p_next_rec;
+    }
+#endif
+    /* If here, no matching attribute found */
+    return(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindAttributeInRec
+**
+** Description      This function searches an SDP discovery record for a specific
+**                  attribute.
+**
+** Returns          Pointer to matching attribute entry, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_ATTR *SDP_FindAttributeInRec (tSDP_DISC_REC *p_rec, UINT16 attr_id)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr;
+
+    p_attr = p_rec->p_first_attr;
+    while (p_attr)
+    {
+        if (p_attr->attr_id == attr_id)
+            return(p_attr);
+
+        p_attr = p_attr->p_next_attr;
+    }
+#endif
+    /* If here, no matching attribute found */
+    return(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInRec
+**
+** Description      This function is called to read the service UUID within a record
+**                  if there is any.
+**
+** Parameters:      p_rec      - pointer to a SDP record.
+**                  p_uuid     - output parameter to save the UUID found.
+**
+** Returns          TRUE if found, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN SDP_FindServiceUUIDInRec(tSDP_DISC_REC *p_rec, tBT_UUID * p_uuid)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr, *p_sattr, *p_extra_sattr;
+
+    p_attr = p_rec->p_first_attr;
+
+    while (p_attr)
+    {
+        if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+            && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+        {
+            for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+            {
+                if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                {
+                    /* only support 16 bits UUID for now */
+                    if (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)
+                    {
+                        p_uuid->len = 2;
+                        p_uuid->uu.uuid16 = p_sattr->attr_value.v.u16;
+                    }
+                    return(TRUE);
+                }
+
+                /* Checking for Toyota G Block Car Kit:
+                **  This car kit puts an extra data element sequence
+                **  where the UUID is suppose to be!!!
+                */
+                else
+                {
+                    if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE)
+                    {
+                        /* Look through data element sequence until no more UUIDs */
+                        for (p_extra_sattr = p_sattr->attr_value.v.p_sub_attr; p_extra_sattr; p_extra_sattr = p_extra_sattr->p_next_attr)
+                        {
+                            /* Increment past this to see if the next attribut is UUID */
+                            if ((SDP_DISC_ATTR_TYPE(p_extra_sattr->attr_len_type) == UUID_DESC_TYPE)
+                                /* only support 16 bits UUID for now */
+                                && (SDP_DISC_ATTR_LEN(p_extra_sattr->attr_len_type) == 2))
+                            {
+                                p_uuid->len = 2;
+                                p_uuid->uu.uuid16 = p_extra_sattr->attr_value.v.u16;
+                                return(TRUE);
+                            }
+                        }
+                    }
+                }
+            }
+            break;
+        }
+        else if (p_attr->attr_id == ATTR_ID_SERVICE_ID)
+        {
+            if ((SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE)
+                /* only support 16 bits UUID for now */
+                && (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) == 2))
+            {
+                p_uuid->len = 2;
+                p_uuid->uu.uuid16 = p_attr->attr_value.v.u16;
+                return(TRUE);
+            }
+        }
+        p_attr = p_attr->p_next_attr;
+    }
+    return FALSE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInRec_128bit
+**
+** Description      This function is called to read the 128-bit service UUID within a record
+**                  if there is any.
+**
+** Parameters:      p_rec      - pointer to a SDP record.
+**                  p_uuid     - output parameter to save the UUID found.
+**
+** Returns          TRUE if found, otherwise FALSE.
+**
+*******************************************************************************/
+BOOLEAN SDP_FindServiceUUIDInRec_128bit(tSDP_DISC_REC *p_rec, tBT_UUID * p_uuid)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr, *p_sattr, *p_extra_sattr;
+
+    p_attr = p_rec->p_first_attr;
+
+    while (p_attr)
+    {
+        if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+            && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+        {
+            for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+            {
+                if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                {
+                    /* only support 128 bits UUID for now */
+                    if (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 16)
+                    {
+                        p_uuid->len = 16;
+                        memcpy(p_uuid->uu.uuid128, p_sattr->attr_value.v.array, MAX_UUID_SIZE);
+                    }
+                    return(TRUE);
+                }
+            }
+            break;
+        }
+        else if (p_attr->attr_id == ATTR_ID_SERVICE_ID)
+        {
+            if ((SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE)
+                /* only support 128 bits UUID for now */
+                && (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) == 16))
+            {
+                p_uuid->len = 16;
+                memcpy(p_uuid->uu.uuid128, p_sattr->attr_value.v.array, MAX_UUID_SIZE);
+                return(TRUE);
+            }
+        }
+        p_attr = p_attr->p_next_attr;
+    }
+    return FALSE;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceInDb
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_REC *SDP_FindServiceInDb (tSDP_DISCOVERY_DB *p_db, UINT16 service_uuid, tSDP_DISC_REC *p_start_rec)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_REC   *p_rec;
+    tSDP_DISC_ATTR  *p_attr, *p_sattr, *p_extra_sattr;
+
+    /* Must have a valid database */
+    if (p_db == NULL)
+        return(NULL);
+
+    if (!p_start_rec)
+        p_rec = p_db->p_first_rec;
+    else
+        p_rec = p_start_rec->p_next_rec;
+
+    while (p_rec)
+    {
+        p_attr = p_rec->p_first_attr;
+        while (p_attr)
+        {
+            if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+                && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+            {
+                for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+
+                    if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                     && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2) ) {
+                        printf("SDP_FindServiceInDb - p_sattr value = 0x%x serviceuuid = 0x%x\r\n", p_sattr->attr_value.v.u16, service_uuid);
+                        if(service_uuid == UUID_SERVCLASS_HDP_PROFILE)
+                        {
+                            if( (p_sattr->attr_value.v.u16==UUID_SERVCLASS_HDP_SOURCE) || ( p_sattr->attr_value.v.u16==UUID_SERVCLASS_HDP_SOURCE))
+                            {
+                                printf("SDP_FindServiceInDb found HDP source or sink\n" );
+                                return (p_rec);
+                            }
+                        }
+
+                    }
+
+                    if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                        && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)
+                        /* for a specific uuid, or any one */
+                        && ((p_sattr->attr_value.v.u16 == service_uuid) || service_uuid == 0))
+                    {
+                        return(p_rec);
+                    }
+
+                    /* Checking for Toyota G Block Car Kit:
+                    **  This car kit puts an extra data element sequence
+                    **  where the UUID is suppose to be!!!
+                    */
+                    else
+                    {
+                        if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE)
+                        {
+                            /* Look through data element sequence until no more UUIDs */
+                            for (p_extra_sattr = p_sattr->attr_value.v.p_sub_attr; p_extra_sattr; p_extra_sattr = p_extra_sattr->p_next_attr)
+                            {
+                                /* Increment past this to see if the next attribut is UUID */
+                                if ((SDP_DISC_ATTR_TYPE(p_extra_sattr->attr_len_type) == UUID_DESC_TYPE)
+                                    && (SDP_DISC_ATTR_LEN(p_extra_sattr->attr_len_type) == 2)
+                                    /* for a specific uuid, or any one */
+                                    && ((p_extra_sattr->attr_value.v.u16 == service_uuid) || (service_uuid == 0)))
+                                {
+                                    return(p_rec);
+                                }
+                            }
+                        }
+                    }
+                }
+                break;
+            }
+            else if (p_attr->attr_id == ATTR_ID_SERVICE_ID)
+            {
+                if ((SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE)
+                    && (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) == 2))
+                {
+                    printf("SDP_FindServiceInDb - p_attr value = 0x%x serviceuuid= 0x%x \r\n", p_attr->attr_value.v.u16, service_uuid);
+                }
+
+                if ((SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE)
+                    && (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) == 2)
+                    /* find a specific UUID or anyone */
+                    && ((p_attr->attr_value.v.u16 == service_uuid) || service_uuid == 0))
+                    return(p_rec);
+            }
+
+            p_attr = p_attr->p_next_attr;
+        }
+
+        p_rec = p_rec->p_next_rec;
+    }
+#endif
+    /* If here, no matching UUID found */
+    return(NULL);
+}
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceInDb_128bit
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+**                  This function is kept separate from SDP_FindServiceInDb since
+**                  that API is expected to return only 16-bit UUIDs
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_REC *SDP_FindServiceInDb_128bit(tSDP_DISCOVERY_DB *p_db, tSDP_DISC_REC *p_start_rec)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_REC   *p_rec;
+    tSDP_DISC_ATTR  *p_attr, *p_sattr, *p_extra_sattr;
+
+    /* Must have a valid database */
+    if (p_db == NULL)
+        return(NULL);
+
+    if (!p_start_rec)
+        p_rec = p_db->p_first_rec;
+    else
+        p_rec = p_start_rec->p_next_rec;
+
+    while (p_rec)
+    {
+        p_attr = p_rec->p_first_attr;
+        while (p_attr)
+        {
+            if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+                && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+            {
+                for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+                    if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                        && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 16))
+                    {
+                        return(p_rec);
+                    }
+                }
+                break;
+            }
+            else if (p_attr->attr_id == ATTR_ID_SERVICE_ID)
+            {
+                if ((SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE)
+                    && (SDP_DISC_ATTR_LEN(p_attr->attr_len_type) == 16))
+                    return(p_rec);
+            }
+
+            p_attr = p_attr->p_next_attr;
+        }
+
+        p_rec = p_rec->p_next_rec;
+    }
+#endif
+    /* If here, no matching UUID found */
+    return(NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindServiceUUIDInDb
+**
+** Description      This function queries an SDP database for a specific service.
+**                  If the p_start_rec pointer is NULL, it looks from the beginning
+**                  of the database, else it continues from the next record after
+**                  p_start_rec.
+**
+** NOTE             the only difference between this function and the previous function
+**                  "SDP_FindServiceInDb()" is that this function takes a tBT_UUID input
+**
+** Returns          Pointer to record containing service class, or NULL
+**
+*******************************************************************************/
+tSDP_DISC_REC *SDP_FindServiceUUIDInDb (tSDP_DISCOVERY_DB *p_db, tBT_UUID *p_uuid, tSDP_DISC_REC *p_start_rec)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_REC   *p_rec;
+    tSDP_DISC_ATTR  *p_attr, *p_sattr;
+
+    /* Must have a valid database */
+    if (p_db == NULL)
+        return(NULL);
+
+    if (!p_start_rec)
+        p_rec = p_db->p_first_rec;
+    else
+        p_rec = p_start_rec->p_next_rec;
+
+    while (p_rec)
+    {
+        p_attr = p_rec->p_first_attr;
+        while (p_attr)
+        {
+            if ((p_attr->attr_id == ATTR_ID_SERVICE_CLASS_ID_LIST)
+                && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+            {
+                for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+                    if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                    {
+
+                        printf("uuid len=%d ", p_uuid->len);
+                        if (p_uuid->len == 2)
+                        {
+                            printf("uuid=0x%x \n", p_uuid->uu.uuid16);
+                        }
+                        else
+                        {
+                            printf("\n");
+                        }
+
+                        if (sdpu_compare_uuid_with_attr (p_uuid, p_sattr))
+                            return(p_rec);
+                    }
+                }
+                break;
+            }
+            else if (p_attr->attr_id == ATTR_ID_SERVICE_ID)
+            {
+                if (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == UUID_DESC_TYPE )
+                {
+                    if (sdpu_compare_uuid_with_attr (p_uuid, p_attr))
+                        return(p_rec);
+                }
+            }
+
+            p_attr = p_attr->p_next_attr;
+        }
+
+        p_rec = p_rec->p_next_rec;
+    }
+#endif  /* CLIENT_ENABLED == TRUE */
+    /* If here, no matching UUID found */
+    return(NULL);
+}
+
+#if SDP_CLIENT_ENABLED == TRUE
+/*******************************************************************************
+**
+** Function         sdp_fill_proto_elem
+**
+** Description      This function retrieves the protocol element.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+static BOOLEAN sdp_fill_proto_elem( tSDP_DISC_ATTR  *p_attr, UINT16 layer_uuid,
+                                    tSDP_PROTOCOL_ELEM *p_elem)
+{
+    tSDP_DISC_ATTR  *p_sattr;
+
+    /* Walk through the protocol descriptor list */
+    for (p_attr = p_attr->attr_value.v.p_sub_attr; p_attr; p_attr = p_attr->p_next_attr)
+    {
+        /* Safety check - each entry should itself be a sequence */
+        if (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) != DATA_ELE_SEQ_DESC_TYPE)
+            return(FALSE);
+
+        /* Now, see if the entry contains the layer we are interested in */
+        for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+        {
+            /* SDP_TRACE_DEBUG3 ("SDP - p_sattr 0x%x, layer_uuid:0x%x, u16:0x%x####",
+                p_sattr, layer_uuid, p_sattr->attr_value.v.u16); */
+
+            if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)
+                && (p_sattr->attr_value.v.u16 == layer_uuid))
+            {
+                /* Bingo. Now fill in the passed element */
+                p_elem->protocol_uuid = layer_uuid;
+                p_elem->num_params = 0;
+
+                /* Store the parameters, if any */
+                for (p_sattr = p_sattr->p_next_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+                    if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) != UINT_DESC_TYPE)
+                        break;
+
+                    if (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)
+                        p_elem->params[p_elem->num_params++] = p_sattr->attr_value.v.u16;
+                    else
+                        p_elem->params[p_elem->num_params++] = p_sattr->attr_value.v.u8;
+
+                    if (p_elem->num_params >= SDP_MAX_PROTOCOL_PARAMS)
+                        break;
+                }
+                return(TRUE);
+            }
+        }
+    }
+
+    return(FALSE);
+}
+#endif  /* CLIENT_ENABLED == TRUE */
+
+/*******************************************************************************
+**
+** Function         SDP_FindProtocolListElemInRec
+**
+** Description      This function looks at a specific discovery record for a protocol
+**                  list element.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+BOOLEAN SDP_FindProtocolListElemInRec (tSDP_DISC_REC *p_rec, UINT16 layer_uuid, tSDP_PROTOCOL_ELEM *p_elem)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr;
+
+    p_attr = p_rec->p_first_attr;
+    while (p_attr)
+    {
+        /* Find the protocol descriptor list */
+        if ((p_attr->attr_id == ATTR_ID_PROTOCOL_DESC_LIST)
+            && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+        {
+            return sdp_fill_proto_elem(p_attr, layer_uuid, p_elem);
+        }
+        p_attr = p_attr->p_next_attr;
+    }
+#endif
+    /* If here, no match found */
+    return(FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindAddProtoListsElemInRec
+**
+** Description      This function looks at a specific discovery record for a protocol
+**                  list element.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the passed protocol list element is filled in.
+**
+*******************************************************************************/
+BOOLEAN SDP_FindAddProtoListsElemInRec (tSDP_DISC_REC *p_rec, UINT16 layer_uuid, tSDP_PROTOCOL_ELEM *p_elem)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr, *p_sattr;
+    BOOLEAN         ret = FALSE;
+
+    p_attr = p_rec->p_first_attr;
+    while (p_attr)
+    {
+        /* Find the additional protocol descriptor list attribute */
+        if ((p_attr->attr_id == ATTR_ID_ADDITION_PROTO_DESC_LISTS)
+            && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+        {
+            for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+            {
+                /* Safety check - each entry should itself be a sequence */
+                if (SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE)
+                {
+                    if ( (ret = sdp_fill_proto_elem(p_sattr, layer_uuid, p_elem)) == TRUE)
+                        break;
+                }
+            }
+            return ret;
+        }
+        p_attr = p_attr->p_next_attr;
+    }
+#endif
+    /* If here, no match found */
+    return(FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_FindProfileVersionInRec
+**
+** Description      This function looks at a specific discovery record for the
+**                  Profile list descriptor, and pulls out the version number.
+**                  The version number consists of an 8-bit major version and
+**                  an 8-bit minor version.
+**
+** Returns          TRUE if found, FALSE if not
+**                  If found, the major and minor version numbers that were passed
+**                  in are filled in.
+**
+*******************************************************************************/
+BOOLEAN SDP_FindProfileVersionInRec (tSDP_DISC_REC *p_rec, UINT16 profile_uuid, UINT16 *p_version)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISC_ATTR  *p_attr, *p_sattr;
+
+    p_attr = p_rec->p_first_attr;
+    while (p_attr)
+    {
+        /* Find the profile descriptor list */
+        if ((p_attr->attr_id == ATTR_ID_BT_PROFILE_DESC_LIST)
+            && (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) == DATA_ELE_SEQ_DESC_TYPE))
+        {
+            /* Walk through the protocol descriptor list */
+            for (p_attr = p_attr->attr_value.v.p_sub_attr; p_attr; p_attr = p_attr->p_next_attr)
+            {
+                /* Safety check - each entry should itself be a sequence */
+                if (SDP_DISC_ATTR_TYPE(p_attr->attr_len_type) != DATA_ELE_SEQ_DESC_TYPE)
+                    return(FALSE);
+
+                /* Now, see if the entry contains the profile UUID we are interested in */
+                for (p_sattr = p_attr->attr_value.v.p_sub_attr; p_sattr; p_sattr = p_sattr->p_next_attr)
+                {
+                    if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UUID_DESC_TYPE)
+                        && (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2)  /* <- This is bytes, not size code! */
+                        && (p_sattr->attr_value.v.u16 == profile_uuid))
+                    {
+                        /* Now fill in the major and minor numbers */
+                        /* if the attribute matches the description for version (type UINT, size 2 bytes) */
+                        p_sattr = p_sattr->p_next_attr;
+
+                        if ((SDP_DISC_ATTR_TYPE(p_sattr->attr_len_type) == UINT_DESC_TYPE) &&
+                            (SDP_DISC_ATTR_LEN(p_sattr->attr_len_type) == 2))
+                        {
+                            /* The high order 8 bits is the major number, low order is the minor number (big endian) */
+                            *p_version = p_sattr->attr_value.v.u16;
+
+                            return(TRUE);
+                        }
+                        else
+                            return(FALSE);  /* The type and/or size was not valid for the profile list version */
+                    }
+                }
+            }
+
+            return(FALSE);
+        }
+        p_attr = p_attr->p_next_attr;
+    }
+#endif  /* CLIENT_ENABLED == TRUE */
+
+    /* If here, no match found */
+    return(FALSE);
+}
+
+/*******************************************************************************
+**                   Device Identification (DI) Client Functions
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         SDP_DiDiscover
+**
+** Description      This function queries a remote device for DI information.
+**
+** Returns          SDP_SUCCESS if query started successfully, else error
+**
+*******************************************************************************/
+UINT16 SDP_DiDiscover( BD_ADDR remote_device, tSDP_DISCOVERY_DB *p_db,
+                       UINT32 len, tSDP_DISC_CMPL_CB *p_cb )
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    UINT16  result   = SDP_DI_DISC_FAILED;
+    UINT16  num_uuids = 1;
+    UINT16  di_uuid   = UUID_SERVCLASS_PNP_INFORMATION;
+
+    /* build uuid for db init */
+    tSDP_UUID init_uuid;
+    init_uuid.len = 2;
+    init_uuid.uu.uuid16 = di_uuid;
+
+    if ( SDP_InitDiscoveryDb(p_db, len, num_uuids, &init_uuid, 0, NULL) )
+        if ( SDP_ServiceSearchRequest(remote_device, p_db, p_cb) )
+            result = SDP_SUCCESS;
+
+    return result;
+#else
+    return SDP_DI_DISC_FAILED;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_GetNumDiRecords
+**
+** Description      Searches specified database for DI records
+**
+** Returns          number of DI records found
+**
+*******************************************************************************/
+UINT8 SDP_GetNumDiRecords( tSDP_DISCOVERY_DB *p_db )
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    UINT8   num_records = 0;
+    tSDP_DISC_REC *p_curr_record = NULL;
+
+    do
+    {
+        p_curr_record = SDP_FindServiceInDb( p_db, UUID_SERVCLASS_PNP_INFORMATION,
+                                             p_curr_record );
+        if ( p_curr_record )
+            num_records++;
+    }while ( p_curr_record );
+
+    return num_records;
+#else
+    return 0;
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_GetDiRecord
+**
+** Description      This function retrieves a remote device's DI record from
+**                  the specified database.
+**
+** Returns          SDP_SUCCESS if record retrieved, else error
+**
+*******************************************************************************/
+UINT16 SDP_GetDiRecord( UINT8 get_record_index, tSDP_DI_GET_RECORD *p_device_info,
+                        tSDP_DISCOVERY_DB *p_db )
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    UINT16  result = SDP_NO_DI_RECORD_FOUND;
+    UINT8  curr_record_index = 1;
+
+    tSDP_DISC_REC *p_curr_record = NULL;
+
+    /* find the requested SDP record in the discovery database */
+    do
+    {
+        p_curr_record = SDP_FindServiceInDb( p_db, UUID_SERVCLASS_PNP_INFORMATION,
+                                             p_curr_record );
+        if ( p_curr_record )
+        {
+            if ( curr_record_index++ == get_record_index )
+            {
+                result = SDP_SUCCESS;
+                break;
+            }
+        }
+    }while ( p_curr_record );
+
+    if ( result == SDP_SUCCESS )
+    {
+        /* copy the information from the SDP record to the DI record */
+        tSDP_DISC_ATTR *p_curr_attr = NULL;
+
+        /* ClientExecutableURL is optional */
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_CLIENT_EXE_URL );
+        if ( p_curr_attr )
+            BCM_STRNCPY_S( p_device_info->rec.client_executable_url, sizeof(p_device_info->rec.client_executable_url),
+                           (char *)p_curr_attr->attr_value.v.array, SDP_MAX_ATTR_LEN );
+        else
+            p_device_info->rec.client_executable_url[0] = '\0';
+
+        /* Service Description is optional */
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_SERVICE_DESCRIPTION );
+        if ( p_curr_attr )
+            BCM_STRNCPY_S( p_device_info->rec.service_description, sizeof(p_device_info->rec.service_description),
+                           (char *)p_curr_attr->attr_value.v.array, SDP_MAX_ATTR_LEN );
+        else
+            p_device_info->rec.service_description[0] = '\0';
+
+        /* DocumentationURL is optional */
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_DOCUMENTATION_URL );
+        if ( p_curr_attr )
+            BCM_STRNCPY_S( p_device_info->rec.documentation_url, sizeof(p_device_info->rec.documentation_url),
+                           (char *)p_curr_attr->attr_value.v.array, SDP_MAX_ATTR_LEN );
+        else
+            p_device_info->rec.documentation_url[0] = '\0';
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_SPECIFICATION_ID );
+        if ( p_curr_attr )
+            p_device_info->spec_id = p_curr_attr->attr_value.v.u16;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_VENDOR_ID );
+        if ( p_curr_attr )
+            p_device_info->rec.vendor = p_curr_attr->attr_value.v.u16;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_VENDOR_ID_SOURCE );
+        if ( p_curr_attr )
+            p_device_info->rec.vendor_id_source = p_curr_attr->attr_value.v.u16;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_PRODUCT_ID );
+        if ( p_curr_attr )
+            p_device_info->rec.product = p_curr_attr->attr_value.v.u16;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_PRODUCT_VERSION );
+        if ( p_curr_attr )
+            p_device_info->rec.version = p_curr_attr->attr_value.v.u16;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+
+        p_curr_attr = SDP_FindAttributeInRec( p_curr_record, ATTR_ID_PRIMARY_RECORD );
+        if ( p_curr_attr )
+            p_device_info->rec.primary_record = (BOOLEAN)p_curr_attr->attr_value.v.u8;
+        else
+            result = SDP_ERR_ATTR_NOT_PRESENT;
+    }
+
+    return result;
+#else   /* SDP_CLIENT_ENABLED is FALSE */
+    return SDP_NO_DI_RECORD_FOUND;
+#endif
+}
+
+/*******************************************************************************
+**                   Device Identification (DI) Server Functions
+*******************************************************************************/
+
+/*******************************************************************************
+**
+** Function         SDP_SetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+**
+**
+** Returns          Returns SDP_SUCCESS if record added successfully, else error
+**
+*******************************************************************************/
+UINT16 SDP_SetLocalDiRecord( tSDP_DI_RECORD *p_device_info, UINT32 *p_handle )
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16  result = SDP_SUCCESS;
+    UINT32  handle;
+    UINT16  di_uuid = UUID_SERVCLASS_PNP_INFORMATION;
+    UINT16  di_specid = BLUETOOTH_DI_SPECIFICATION;
+    UINT8   temp_u16[2];
+    UINT8   *p_temp;
+    UINT8   u8;
+
+    *p_handle = 0;
+    if ( p_device_info == NULL )
+        return SDP_ILLEGAL_PARAMETER;
+
+    /* if record is to be primary record, get handle to replace old primary */
+    if ( p_device_info->primary_record == TRUE && sdp_cb.server_db.di_primary_handle )
+        handle = sdp_cb.server_db.di_primary_handle;
+    else
+    {
+        if ( (handle = SDP_CreateRecord()) == 0 )
+            return SDP_NO_RESOURCES;
+    }
+
+    *p_handle = handle;
+
+    /* build the SDP entry */
+    /* Add the UUID to the Service Class ID List */
+    if ((SDP_AddServiceClassIdList(handle, 1, &di_uuid)) == FALSE)
+        result = SDP_DI_REG_FAILED;
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        p_temp = temp_u16;
+        UINT16_TO_BE_STREAM(p_temp, di_specid);
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_SPECIFICATION_ID,
+                                UINT_DESC_TYPE, sizeof(di_specid),
+                                temp_u16)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    /* optional - if string is null, do not add attribute */
+    if ( result == SDP_SUCCESS )
+    {
+        if ( p_device_info->client_executable_url[0] != '\0' )
+        {
+            if ( !((strlen(p_device_info->client_executable_url)+1 <= SDP_MAX_ATTR_LEN) &&
+                   SDP_AddAttribute(handle, ATTR_ID_CLIENT_EXE_URL, URL_DESC_TYPE,
+                                    (UINT32)(strlen(p_device_info->client_executable_url)+1),
+                                    (UINT8 *)p_device_info->client_executable_url)) )
+                result = SDP_DI_REG_FAILED;
+        }
+    }
+
+    /* optional - if string is null, do not add attribute */
+    if ( result == SDP_SUCCESS )
+    {
+        if ( p_device_info->service_description[0] != '\0' )
+        {
+            if ( !((strlen(p_device_info->service_description)+1 <= SDP_MAX_ATTR_LEN) &&
+                   SDP_AddAttribute(handle, ATTR_ID_SERVICE_DESCRIPTION,
+                                    TEXT_STR_DESC_TYPE,
+                                    (UINT32)(strlen(p_device_info->service_description)+1),
+                                    (UINT8 *)p_device_info->service_description)) )
+                result = SDP_DI_REG_FAILED;
+        }
+    }
+
+    /* optional - if string is null, do not add attribute */
+    if ( result == SDP_SUCCESS )
+    {
+        if ( p_device_info->documentation_url[0] != '\0' )
+        {
+            if ( !((strlen(p_device_info->documentation_url)+1 <= SDP_MAX_ATTR_LEN) &&
+                   SDP_AddAttribute(handle, ATTR_ID_DOCUMENTATION_URL, URL_DESC_TYPE,
+                                    (UINT32)(strlen(p_device_info->documentation_url)+1),
+                                    (UINT8 *)p_device_info->documentation_url)) )
+                result = SDP_DI_REG_FAILED;
+        }
+    }
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        p_temp = temp_u16;
+        UINT16_TO_BE_STREAM(p_temp, p_device_info->vendor);
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_VENDOR_ID, UINT_DESC_TYPE,
+                                sizeof(p_device_info->vendor), temp_u16)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        p_temp = temp_u16;
+        UINT16_TO_BE_STREAM (p_temp, p_device_info->product);
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_PRODUCT_ID,
+                                UINT_DESC_TYPE, sizeof(p_device_info->product), temp_u16)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        p_temp = temp_u16;
+        UINT16_TO_BE_STREAM (p_temp, p_device_info->version);
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_PRODUCT_VERSION, UINT_DESC_TYPE,
+                                sizeof(p_device_info->version), temp_u16)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        u8 = (UINT8)p_device_info->primary_record;
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_PRIMARY_RECORD,
+                                BOOLEAN_DESC_TYPE, 1, &u8)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    /* mandatory */
+    if ( result == SDP_SUCCESS)
+    {
+        p_temp = temp_u16;
+        UINT16_TO_BE_STREAM(p_temp, p_device_info->vendor_id_source);
+        if ( !(SDP_AddAttribute(handle, ATTR_ID_VENDOR_ID_SOURCE, UINT_DESC_TYPE,
+                                sizeof(p_device_info->vendor_id_source), temp_u16)) )
+            result = SDP_DI_REG_FAILED;
+    }
+
+    if ( result != SDP_SUCCESS )
+        SDP_DeleteRecord( handle );
+    else if (p_device_info->primary_record == TRUE)
+        sdp_cb.server_db.di_primary_handle = handle;
+
+    return result;
+#else   /* SDP_SERVER_ENABLED is FALSE */
+    return SDP_DI_REG_FAILED;
+#endif  /* if SDP_SERVER_ENABLED */
+}
+
+/*******************************************************************************
+**
+** Function         SDP_GetLocalDiRecord
+**
+** Description      This function adds a DI record to the local SDP database.
+**
+**                  Fills in the device information of the record
+**                  p_handle - if p_handle == 0, the primary record is returned
+**
+** Returns          Returns SDP_SUCCESS if record exists, else error
+**
+*******************************************************************************/
+UINT16 SDP_GetLocalDiRecord(tSDP_DI_GET_RECORD *p_device_info, UINT32 *p_handle )
+{
+    UINT16 result = SDP_NO_DI_RECORD_FOUND;
+
+#if SDP_SERVER_ENABLED == TRUE
+    tSDP_RECORD     *p_rec;
+    tSDP_ATTRIBUTE  *p_attr;
+    UINT8           *p_temp;
+    INT32            templen;
+
+    if (*p_handle == 0)
+        *p_handle = sdp_cb.server_db.di_primary_handle;
+
+    if ((p_rec = sdp_db_find_record(*p_handle)) != NULL)
+    {
+        memset(p_device_info, 0, sizeof(tSDP_DI_RECORD));
+
+        result = SDP_SUCCESS;
+
+        /* Retrieve the Specification ID */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_SPECIFICATION_ID,
+                                              ATTR_ID_SPECIFICATION_ID)) != NULL)
+        {
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_UINT16 (p_device_info->spec_id, p_temp);
+        }
+
+        /* Retrieve the Vendor ID */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_VENDOR_ID,
+                                              ATTR_ID_VENDOR_ID)) != NULL)
+        {
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_UINT16 (p_device_info->rec.vendor, p_temp);
+        }
+
+        /* Retrieve the Product ID */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_PRODUCT_ID,
+                                              ATTR_ID_PRODUCT_ID)) != NULL)
+        {
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_UINT16 (p_device_info->rec.product, p_temp);
+        }
+
+        /* Retrieve the Version ID */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_PRODUCT_VERSION,
+                                              ATTR_ID_PRODUCT_VERSION)) != NULL)
+        {
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_UINT16 (p_device_info->rec.version, p_temp);
+        }
+
+        /* Retrieve the Vendor ID Source ID */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_VENDOR_ID_SOURCE,
+                                              ATTR_ID_VENDOR_ID_SOURCE)) != NULL)
+        {
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_UINT16 (p_device_info->rec.vendor_id_source, p_temp);
+        }
+
+        /* Retrieve the Primary Record */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_PRIMARY_RECORD,
+                                              ATTR_ID_PRIMARY_RECORD)) != NULL)
+        {
+            p_device_info->rec.primary_record = *p_attr->value_ptr;
+        }
+
+        /* Retrieve the Client Executable URL */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_CLIENT_EXE_URL,
+                                              ATTR_ID_CLIENT_EXE_URL)) != NULL)
+        {
+            templen = (INT32)((p_attr->len < SDP_MAX_ATTR_LEN) ? p_attr->len : SDP_MAX_ATTR_LEN);
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_ARRAY (p_temp, p_device_info->rec.client_executable_url, templen);
+        }
+
+        /* Retrieve the Service Description */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_SERVICE_DESCRIPTION,
+                                              ATTR_ID_SERVICE_DESCRIPTION)) != NULL)
+        {
+            templen = (INT32)((p_attr->len < SDP_MAX_ATTR_LEN) ? p_attr->len : SDP_MAX_ATTR_LEN);
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_ARRAY (p_temp, p_device_info->rec.service_description, templen);
+        }
+
+        /* Retrieve the Documentation URL */
+        if ((p_attr = sdp_db_find_attr_in_rec(p_rec, ATTR_ID_DOCUMENTATION_URL,
+                                              ATTR_ID_DOCUMENTATION_URL)) != NULL)
+        {
+            templen = (INT32)((p_attr->len < SDP_MAX_ATTR_LEN) ? p_attr->len : SDP_MAX_ATTR_LEN);
+            p_temp = p_attr->value_ptr;
+            BE_STREAM_TO_ARRAY (p_temp, p_device_info->rec.documentation_url, templen);
+        }
+    }
+    else
+        *p_handle = 0;
+#endif
+
+    return result;
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_SetTraceLevel
+**
+** Description      This function sets the trace level for SDP. If called with
+**                  a value of 0xFF, it simply reads the current trace level.
+**
+** Returns          the new (current) trace level
+**
+*******************************************************************************/
+UINT8 SDP_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        sdp_cb.trace_level = new_level;
+
+    return(sdp_cb.trace_level);
+}
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+/*******************************************************************************
+**
+** Function         SDP_ConnOpen
+**
+** Description      This function creates a connection to the SDP server on the
+**                  given device.
+**
+** Returns          0, if failed to initiate connection. Otherwise, the handle.
+**
+*******************************************************************************/
+UINT32 SDP_ConnOpen (UINT8 *p_bd_addr, tSDP_DISC_RES_CB *p_rcb,
+                     tSDP_DISC_CMPL_CB *p_cb)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB    *p_ccb;
+    UINT32      idx = 0;
+
+    if (!p_cb || !p_rcb)
+        return(idx);
+
+    /* Specific BD address */
+    p_ccb = sdp_conn_originate (p_bd_addr);
+
+    if (!p_ccb)
+        return(idx);
+
+    p_ccb->disc_state = SDP_DISC_WAIT_CONN;
+    p_ccb->p_db       = (tSDP_DISCOVERY_DB *)p_rcb;
+    p_ccb->p_cb       = p_cb;
+
+    p_ccb->is_attr_search = SDP_IS_PASS_THRU;
+
+    idx = (UINT32)(p_ccb - sdp_cb.ccb);
+    return(UINT32)(idx + 1);
+#else
+    return(0);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_WriteData
+**
+** Description      This function sends data to the connected SDP server.
+**
+** Returns          TRUE if data is sent, FALSE if failed.
+**
+*******************************************************************************/
+BOOLEAN SDP_WriteData (UINT32 handle, BT_HDR  *p_msg)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB    *p_ccb = NULL;
+
+    if (p_msg && (handle > 0) && (handle <= SDP_MAX_CONNECTIONS) )
+    {
+        p_ccb = &sdp_cb.ccb[handle - 1];
+        if ( (p_ccb->con_state == SDP_STATE_CONNECTED) &&
+             (p_ccb->con_flags & SDP_FLAGS_IS_ORIG) )
+        {
+            /* Start inactivity timer */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+            L2CA_DataWrite (p_ccb->connection_id, p_msg);
+            return TRUE;
+        }
+    }
+#endif
+    return FALSE;
+}
+
+/*******************************************************************************
+**
+** Function         SDP_ConnClose
+**
+** Description      This function is called to close a SDP connection.
+**
+** Parameters:      handle      - Handle of the connection returned by SDP_ConnOpen
+**
+** Returns          TRUE if connection is closed, FALSE if failed to find the handle.
+**
+*******************************************************************************/
+BOOLEAN SDP_ConnClose (UINT32 handle)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    tCONN_CB    *p_ccb = NULL;
+
+    if (handle > 0 && handle <= SDP_MAX_CONNECTIONS)
+    {
+        p_ccb = &sdp_cb.ccb[handle - 1];
+        sdp_disconnect (p_ccb, SDP_SUCCESS);
+        return TRUE;
+    }
+#endif
+    return FALSE;
+}
+#endif
diff --git a/stack/sdp/sdp_db.c b/stack/sdp/sdp_db.c
new file mode 100644
index 0000000..45af000
--- /dev/null
+++ b/stack/sdp/sdp_db.c
@@ -0,0 +1,962 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains functions that handle the database
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+
+#include "gki.h"
+
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "sdp_api.h"
+#include "sdpint.h"
+#include "wbt_api.h"
+
+#if SDP_SERVER_ENABLED == TRUE
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static BOOLEAN find_uuid_in_seq (UINT8 *p , UINT32 seq_len, UINT8 *p_his_uuid,
+                                 UINT16 his_len, int nest_level);
+
+
+/*******************************************************************************
+**
+** Function         sdp_db_service_search
+**
+** Description      This function searches for a record that contains the
+**                  specified UIDs. It is passed either NULL to start at the
+**                  beginning, or the previous record found.
+**
+** Returns          Pointer to the record, or NULL if not found.
+**
+*******************************************************************************/
+tSDP_RECORD *sdp_db_service_search (tSDP_RECORD *p_rec, tSDP_UUID_SEQ *p_seq)
+{
+    UINT16          xx, yy;
+    tSDP_ATTRIBUTE *p_attr;
+    tSDP_RECORD     *p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];
+
+    /* If NULL, start at the beginning, else start at the first specified record */
+    if (!p_rec)
+        p_rec = &sdp_cb.server_db.record[0];
+    else
+        p_rec++;
+
+    /* Look through the records. The spec says that a match occurs if */
+    /* the record contains all the passed UUIDs in it.                */
+    for ( ; p_rec < p_end; p_rec++)
+    {
+        for (yy = 0; yy < p_seq->num_uids; yy++)
+        {
+            p_attr = &p_rec->attribute[0];
+            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
+            {
+                if (p_attr->type == UUID_DESC_TYPE)
+                {
+                    if (sdpu_compare_uuid_arrays (p_attr->value_ptr, p_attr->len,
+                                                  &p_seq->uuid_entry[yy].value[0],
+                                                  p_seq->uuid_entry[yy].len))
+                        break;
+                }
+                else if (p_attr->type == DATA_ELE_SEQ_DESC_TYPE)
+                {
+                    if (find_uuid_in_seq (p_attr->value_ptr, p_attr->len,
+                                          &p_seq->uuid_entry[yy].value[0],
+                                          p_seq->uuid_entry[yy].len, 0))
+                        break;
+                }
+            }
+            /* If any UUID was not found,  on to the next record */
+            if (xx == p_rec->num_attributes)
+                break;
+        }
+
+        /* If every UUID was found in the record, return the record */
+        if (yy == p_seq->num_uids)
+            return (p_rec);
+    }
+
+    /* If here, no more records found */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         find_uuid_in_seq
+**
+** Description      This function searches a data element sequenct for a UUID.
+**
+** Returns          TRUE if found, else FALSE
+**
+*******************************************************************************/
+static BOOLEAN find_uuid_in_seq (UINT8 *p , UINT32 seq_len, UINT8 *p_uuid,
+                                 UINT16 uuid_len, int nest_level)
+{
+    UINT8   *p_end = p + seq_len;
+    UINT8   type;
+    UINT32  len;
+
+    /* A little safety check to avoid excessive recursion */
+    if (nest_level > 3)
+        return (FALSE);
+
+    while (p < p_end)
+    {
+        type = *p++;
+        p = sdpu_get_len_from_type (p, type, &len);
+        type = type >> 3;
+        if (type == UUID_DESC_TYPE)
+        {
+            if (sdpu_compare_uuid_arrays (p, len, p_uuid, uuid_len))
+                return (TRUE);
+        }
+        else if (type == DATA_ELE_SEQ_DESC_TYPE)
+        {
+            if (find_uuid_in_seq (p, len, p_uuid, uuid_len, nest_level + 1))
+                return (TRUE);
+        }
+        p = p + len;
+    }
+
+    /* If here, failed to match */
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         sdp_db_find_record
+**
+** Description      This function searches for a record with a specific handle
+**                  It is passed the handle of the record.
+**
+** Returns          Pointer to the record, or NULL if not found.
+**
+*******************************************************************************/
+tSDP_RECORD *sdp_db_find_record (UINT32 handle)
+{
+    tSDP_RECORD     *p_rec;
+    tSDP_RECORD     *p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];
+
+    /* Look through the records for the caller's handle */
+    for (p_rec = &sdp_cb.server_db.record[0]; p_rec < p_end; p_rec++)
+    {
+        if (p_rec->record_handle == handle)
+            return (p_rec);
+    }
+
+    /* Record with that handle not found. */
+    return (NULL);
+}
+
+/*******************************************************************************
+**
+** Function         sdp_db_find_attr_in_rec
+**
+** Description      This function searches a record for specific attributes.
+**                  It is passed a pointer to the record. If the record contains
+**                  the specified attribute, (the caller may specify be a range
+**                  of attributes), the attribute is returned.
+**
+** Returns          Pointer to the attribute, or NULL if not found.
+**
+*******************************************************************************/
+tSDP_ATTRIBUTE *sdp_db_find_attr_in_rec (tSDP_RECORD *p_rec, UINT16 start_attr,
+                                         UINT16 end_attr)
+{
+    tSDP_ATTRIBUTE  *p_at;
+    UINT16          xx;
+
+    /* Note that the attributes in a record are assumed to be in sorted order */
+    for (xx = 0, p_at = &p_rec->attribute[0]; xx < p_rec->num_attributes;
+         xx++, p_at++)
+    {
+        if ((p_at->id >= start_attr) && (p_at->id <= end_attr))
+            return (p_at);
+    }
+
+    /* No matching attribute found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdp_compose_proto_list
+**
+** Description      This function is called to compose a data sequence from
+**                  protocol element list struct pointer
+**
+** Returns          the length of the data sequence
+**
+*******************************************************************************/
+static int sdp_compose_proto_list( UINT8 *p, UINT16 num_elem,
+                                  tSDP_PROTOCOL_ELEM *p_elem_list)
+{
+    UINT16          xx, yy, len;
+    BOOLEAN            is_rfcomm_scn;
+    UINT8           *p_head = p;
+    UINT8            *p_len;
+
+    /* First, build the protocol list. This consists of a set of data element
+    ** sequences, one for each layer. Each layer sequence consists of layer's
+    ** UUID and optional parameters
+    */
+    for (xx = 0; xx < num_elem; xx++, p_elem_list++)
+    {
+        len = 3 + (p_elem_list->num_params * 3);
+        UINT8_TO_BE_STREAM  (p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+
+        p_len = p;
+        *p++ = (UINT8) len;
+
+        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+        UINT16_TO_BE_STREAM (p, p_elem_list->protocol_uuid);
+
+        if (p_elem_list->protocol_uuid == UUID_PROTOCOL_RFCOMM)
+            is_rfcomm_scn = TRUE;
+        else
+            is_rfcomm_scn = FALSE;
+
+        for (yy = 0; yy < p_elem_list->num_params; yy++)
+        {
+            if (is_rfcomm_scn)
+            {
+                UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_ONE_BYTE);
+                UINT8_TO_BE_STREAM (p, p_elem_list->params[yy]);
+
+                *p_len -= 1;
+            }
+            else
+            {
+                UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+                UINT16_TO_BE_STREAM (p, p_elem_list->params[yy]);
+            }
+        }
+    }
+    return (p - p_head);
+}
+
+#endif  /* SDP_SERVER_ENABLED == TRUE */
+
+/*******************************************************************************
+**
+** Function         SDP_CreateRecord
+**
+** Description      This function is called to create a record in the database.
+**                  This would be through the SDP database maintenance API. The
+**                  record is created empty, teh application should then call
+**                  "add_attribute" to add the record's attributes.
+**
+** Returns          Record handle if OK, else 0.
+**
+*******************************************************************************/
+UINT32 SDP_CreateRecord (void)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT32    handle;
+    UINT8     buf[4];
+    tSDP_DB  *p_db = &sdp_cb.server_db;
+
+    /* First, check if there is a free record */
+    if (p_db->num_records < SDP_MAX_RECORDS)
+    {
+        memset (&p_db->record[p_db->num_records], 0,
+                sizeof (tSDP_RECORD));
+
+        /* We will use a handle of the first unreserved handle plus last record
+        ** number + 1 */
+        if (p_db->num_records)
+            handle = p_db->record[p_db->num_records - 1].record_handle + 1;
+        else
+            handle = 0x10000;
+
+        p_db->record[p_db->num_records].record_handle = handle;
+
+        p_db->num_records++;
+
+        /* Add the first attribute (the handle) automatically */
+        UINT32_TO_BE_FIELD (buf, handle);
+        SDP_AddAttribute (handle, ATTR_ID_SERVICE_RECORD_HDL, UINT_DESC_TYPE,
+                          4, buf);
+
+        return (p_db->record[p_db->num_records - 1].record_handle);
+    }
+#endif
+        return (0);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_DeleteRecord
+**
+** Description      This function is called to add a record (or all records)
+**                  from the database. This would be through the SDP database
+**                  maintenance API.
+**
+**                  If a record handle of 0 is passed, all records are deleted.
+**
+** Returns          TRUE if succeeded, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_DeleteRecord (UINT32 handle)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx, yy, zz;
+    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];
+
+    if (handle == 0 || sdp_cb.server_db.num_records == 0)
+    {
+        /* Delete all records in the database */
+        sdp_cb.server_db.num_records = 0;
+
+        /* require new DI record to be created in SDP_SetLocalDiRecord */
+        sdp_cb.server_db.di_primary_handle = 0;
+        sdp_cb.server_db.brcm_di_registered = 0;
+
+        return (TRUE);
+    }
+    else
+    {
+        /* Find the record in the database */
+        for (xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++)
+        {
+            if (p_rec->record_handle == handle)
+            {
+                /* Found it. Shift everything up one */
+                for (yy = xx; yy < sdp_cb.server_db.num_records; yy++, p_rec++)
+                {
+                    *p_rec = *(p_rec + 1);
+
+                    /* Adjust the attribute value pointer for each attribute */
+                    for (zz = 0; zz < p_rec->num_attributes; zz++)
+                        p_rec->attribute[zz].value_ptr -= sizeof(tSDP_RECORD);
+                }
+
+                sdp_cb.server_db.num_records--;
+
+                /* if we're deleting the primary DI record, clear the */
+                /* value in the control block */
+                if( sdp_cb.server_db.di_primary_handle == handle )
+                {
+                    sdp_cb.server_db.di_primary_handle = 0;
+                    sdp_cb.server_db.brcm_di_registered = 0;
+                }
+
+                return (TRUE);
+            }
+        }
+    }
+#endif
+    return (FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddAttribute
+**
+** Description      This function is called to add an attribute to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the attribute already exists in the record, it is replaced
+**                  with the new value.
+**
+** NOTE             Attribute values must be passed as a Big Endian stream.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddAttribute (UINT32 handle, UINT16 attr_id, UINT8 attr_type,
+                          UINT32 attr_len, UINT8 *p_val)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx, yy, zz;
+    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];
+
+#if (BT_TRACE_VERBOSE == TRUE)
+    if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG)
+    {
+        if ((attr_type == UINT_DESC_TYPE) ||
+            (attr_type == TWO_COMP_INT_DESC_TYPE) ||
+            (attr_type == UUID_DESC_TYPE) ||
+            (attr_type == DATA_ELE_SEQ_DESC_TYPE) ||
+            (attr_type == DATA_ELE_ALT_DESC_TYPE))
+        {
+            UINT8 num_array[400];
+            UINT32 i;
+            UINT32 len = (attr_len > 200) ? 200 : attr_len;
+
+            num_array[0] ='\0';
+            for (i = 0; i < len; i++)
+            {
+                sprintf((char *)&num_array[i*2],"%02X",(UINT8)(p_val[i]));
+            }
+            SDP_TRACE_DEBUG6("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%s",
+                            handle,attr_id,attr_type,attr_len,p_val,num_array);
+        }
+        else if (attr_type == BOOLEAN_DESC_TYPE)
+        {
+            SDP_TRACE_DEBUG6("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%d",
+                             handle,attr_id,attr_type,attr_len,p_val,*p_val);
+        }
+        else
+        {
+            SDP_TRACE_DEBUG6("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%s",
+                handle,attr_id,attr_type,attr_len,p_val,p_val);
+        }
+    }
+#endif
+
+    /* Find the record in the database */
+    for (zz = 0; zz < sdp_cb.server_db.num_records; zz++, p_rec++)
+    {
+        if (p_rec->record_handle == handle)
+        {
+            tSDP_ATTRIBUTE  *p_attr = &p_rec->attribute[0];
+
+            /* Found the record. Now, see if the attribute already exists */
+            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
+            {
+                /* The attribute exists. replace it */
+                if (p_attr->id == attr_id)
+                {
+                    SDP_DeleteAttribute (handle, attr_id);
+                    break;
+                }
+                if (p_attr->id > attr_id)
+                    break;
+            }
+
+            if (p_rec->num_attributes == SDP_MAX_REC_ATTR)
+                return (FALSE);
+
+            /* If not found, see if we can allocate a new entry */
+            if (xx == p_rec->num_attributes)
+                p_attr = &p_rec->attribute[p_rec->num_attributes];
+            else
+            {
+                /* Since the attributes are kept in sorted order, insert ours here */
+                for (yy = p_rec->num_attributes; yy > xx; yy--)
+                    p_rec->attribute[yy] = p_rec->attribute[yy - 1];
+            }
+
+            p_attr->id   = attr_id;
+            p_attr->type = attr_type;
+            p_attr->len  = attr_len;
+
+            if (p_rec->free_pad_ptr + attr_len >= SDP_MAX_PAD_LEN)
+            {
+                /* do truncate only for text string type descriptor */
+                if (attr_type == TEXT_STR_DESC_TYPE)
+                {
+                    SDP_TRACE_WARNING2("SDP_AddAttribute: attr_len:%d too long. truncate to (%d)",
+                        attr_len, SDP_MAX_PAD_LEN - p_rec->free_pad_ptr );
+
+                    attr_len = SDP_MAX_PAD_LEN - p_rec->free_pad_ptr;
+                    p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr] = '\0';
+                    p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr+1] = '\0';
+                }
+                else
+                    attr_len = 0;
+            }
+
+            if ((attr_len > 0) && (p_val != 0))
+            {
+                p_attr->len  = attr_len;
+                memcpy (&p_rec->attr_pad[p_rec->free_pad_ptr], p_val, (size_t)attr_len);
+                p_attr->value_ptr = &p_rec->attr_pad[p_rec->free_pad_ptr];
+                p_rec->free_pad_ptr += attr_len;
+            }
+            else if ((attr_len == 0 && p_attr->len != 0) || /* if truncate to 0 length, simply don't add */
+                      p_val == 0)
+            {
+                SDP_TRACE_ERROR2("SDP_AddAttribute fail, length exceed maximum: ID %d: attr_len:%d ",
+                    attr_id, attr_len );
+                p_attr->id   = p_attr->type = p_attr->len  = 0;
+                return (FALSE);
+            }
+            p_rec->num_attributes++;
+
+            /*** Mark DI record as used by Broadcom ***/
+            if (handle == sdp_cb.server_db.di_primary_handle &&
+                attr_id == ATTR_ID_EXT_BRCM_VERSION)
+                sdp_cb.server_db.brcm_di_registered = TRUE;
+
+            return (TRUE);
+        }
+    }
+#endif
+    return (FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddSequence
+**
+** Description      This function is called to add a sequence to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the sequence already exists in the record, it is replaced
+**                  with the new sequence.
+**
+** NOTE             Element values must be passed as a Big Endian stream.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddSequence (UINT32 handle,  UINT16 attr_id, UINT16 num_elem,
+                         UINT8 type[], UINT8 len[], UINT8 *p_val[])
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx;
+    UINT8           buff[SDP_MAX_ATTR_LEN * 2];
+    UINT8           *p;
+    UINT8           *p_head;
+
+    p = buff;
+    /* First, build the sequence */
+    for (xx = 0; xx < num_elem; xx++)
+    {
+        p_head = p;
+        switch (len[xx])
+        {
+        case 1:
+            UINT8_TO_BE_STREAM (p, (type[xx] << 3) | SIZE_ONE_BYTE);
+            break;
+        case 2:
+            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_TWO_BYTES);
+            break;
+        case 4:
+            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_FOUR_BYTES);
+            break;
+        case 8:
+            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_EIGHT_BYTES);
+            break;
+        case 16:
+            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_SIXTEEN_BYTES);
+            break;
+        default:
+            UINT8_TO_BE_STREAM (p, (type[xx] << 3) | SIZE_IN_NEXT_BYTE);
+            UINT8_TO_BE_STREAM (p, len[xx]);
+            break;
+        }
+
+        ARRAY_TO_BE_STREAM (p, p_val[xx], len[xx]);
+
+        if (p - buff > SDP_MAX_ATTR_LEN)
+        {
+            /* go back to before we add this element */
+            p = p_head;
+            if(p_head == buff)
+            {
+                /* the first element exceed the max length */
+                SDP_TRACE_ERROR0 ("SDP_AddSequence - too long(attribute is not added)!!");
+                return FALSE;
+            }
+            else
+                SDP_TRACE_ERROR2 ("SDP_AddSequence - too long, add %d elements of %d", xx, num_elem);
+            break;
+        }
+    }
+
+    return (SDP_AddAttribute (handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,
+            (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddUuidSequence
+**
+** Description      This function is called to add a UUID sequence to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the sequence already exists in the record, it is replaced
+**                  with the new sequence.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddUuidSequence (UINT32 handle,  UINT16 attr_id, UINT16 num_uuids,
+                             UINT16 *p_uuids)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx;
+    UINT8           buff[SDP_MAX_ATTR_LEN * 2];
+    UINT8           *p = buff;
+    INT32           max_len = SDP_MAX_ATTR_LEN -3;
+
+    /* First, build the sequence */
+    for (xx = 0; xx < num_uuids ; xx++, p_uuids++)
+    {
+        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+        UINT16_TO_BE_STREAM (p, *p_uuids);
+
+        if((p - buff) > max_len)
+        {
+            SDP_TRACE_WARNING2 ("SDP_AddUuidSequence - too long, add %d uuids of %d", xx, num_uuids);
+            break;
+        }
+    }
+
+    return (SDP_AddAttribute (handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,
+            (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_AddProtocolList
+**
+** Description      This function is called to add a protocol descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the protocol list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddProtocolList (UINT32 handle, UINT16 num_elem,
+                             tSDP_PROTOCOL_ELEM *p_elem_list)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT8           buff[SDP_MAX_ATTR_LEN * 2];
+    int offset;
+
+    offset = sdp_compose_proto_list(buff, num_elem, p_elem_list);
+
+    return (SDP_AddAttribute (handle, ATTR_ID_PROTOCOL_DESC_LIST,
+            DATA_ELE_SEQ_DESC_TYPE, (UINT32) offset, buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddAdditionProtoLists
+**
+** Description      This function is called to add a protocol descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the protocol list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddAdditionProtoLists (UINT32 handle, UINT16 num_elem,
+                                   tSDP_PROTO_LIST_ELEM *p_proto_list)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx;
+    UINT8           buff[SDP_MAX_ATTR_LEN * 2];
+    UINT8           *p = buff;
+    UINT8            *p_len;
+    int offset;
+
+    /* for each ProtocolDescriptorList */
+    for (xx = 0; xx < num_elem; xx++, p_proto_list++)
+    {
+        UINT8_TO_BE_STREAM  (p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+        p_len = p++;
+
+        offset = sdp_compose_proto_list(p, p_proto_list->num_elems,
+                                        p_proto_list->list_elem);
+        p += offset;
+
+        *p_len  = (UINT8)(p - p_len - 1);
+    }
+
+    return (SDP_AddAttribute (handle, ATTR_ID_ADDITION_PROTO_DESC_LISTS,
+            DATA_ELE_SEQ_DESC_TYPE, (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         SDP_AddProfileDescriptorList
+**
+** Description      This function is called to add a profile descriptor list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the version already exists in the record, it is replaced
+**                  with the new one.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddProfileDescriptorList (UINT32 handle, UINT16 profile_uuid,
+                                      UINT16 version)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT8           buff[SDP_MAX_ATTR_LEN];
+    UINT8           *p = &buff[2];
+
+    /* First, build the profile descriptor list. This consists of a data element sequence. */
+    /* The sequence consists of profile's UUID and version number  */
+    UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p, profile_uuid);
+
+    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p, version);
+
+    /* Add in type and length fields */
+    buff[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+    buff[1] = (UINT8) (p - &buff[2]);
+
+    return (SDP_AddAttribute (handle, ATTR_ID_BT_PROFILE_DESC_LIST,
+            DATA_ELE_SEQ_DESC_TYPE, (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddLanguageBaseAttrIDList
+**
+** Description      This function is called to add a language base attr list to
+**                  a record. This would be through the SDP database maintenance API.
+**                  If the version already exists in the record, it is replaced
+**                  with the new one.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddLanguageBaseAttrIDList (UINT32 handle, UINT16 lang,
+                                       UINT16 char_enc, UINT16 base_id)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT8           buff[SDP_MAX_ATTR_LEN];
+    UINT8           *p = buff;
+
+    /* First, build the language base descriptor list. This consists of a data */
+    /* element sequence. The sequence consists of 9 bytes (3 UINt16 fields)    */
+    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p, lang);
+
+    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p, char_enc);
+
+    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p, base_id);
+
+    return (SDP_AddAttribute (handle, ATTR_ID_LANGUAGE_BASE_ATTR_ID_LIST,
+            DATA_ELE_SEQ_DESC_TYPE, (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_AddServiceClassIdList
+**
+** Description      This function is called to add a service list to a record.
+**                  This would be through the SDP database maintenance API.
+**                  If the service list already exists in the record, it is replaced
+**                  with the new list.
+**
+** Returns          TRUE if added OK, else FALSE
+**
+*******************************************************************************/
+BOOLEAN SDP_AddServiceClassIdList (UINT32 handle, UINT16 num_services,
+                                   UINT16 *p_service_uuids)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx;
+    UINT8           buff[SDP_MAX_ATTR_LEN * 2];
+    UINT8           *p = buff;
+
+    for (xx = 0; xx < num_services; xx++, p_service_uuids++)
+    {
+        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+        UINT16_TO_BE_STREAM (p, *p_service_uuids);
+    }
+
+    return (SDP_AddAttribute (handle, ATTR_ID_SERVICE_CLASS_ID_LIST,
+            DATA_ELE_SEQ_DESC_TYPE, (UINT32) (p - buff), buff));
+#else   /* SDP_SERVER_ENABLED == FALSE */
+    return (FALSE);
+#endif
+}
+
+
+/*******************************************************************************
+**
+** Function         SDP_DeleteAttribute
+**
+** Description      This function is called to delete an attribute from a record.
+**                  This would be through the SDP database maintenance API.
+**
+** Returns          TRUE if deleted OK, else FALSE if not found
+**
+*******************************************************************************/
+BOOLEAN SDP_DeleteAttribute (UINT32 handle, UINT16 attr_id)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16          xx, yy;
+    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];
+    UINT8           *pad_ptr;
+    UINT32  len;                        /* Number of bytes in the entry */
+
+    /* Find the record in the database */
+    for (xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++)
+    {
+        if (p_rec->record_handle == handle)
+        {
+            tSDP_ATTRIBUTE  *p_attr = &p_rec->attribute[0];
+
+            SDP_TRACE_API2("Deleting attr_id 0x%04x for handle 0x%x", attr_id, handle);
+            /* Found it. Now, find the attribute */
+            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
+            {
+                if (p_attr->id == attr_id)
+                {
+                    pad_ptr = p_attr->value_ptr;
+                    len = p_attr->len;
+
+                    if (len)
+                    {
+                        for (yy = 0; yy < p_rec->num_attributes; yy++)
+                        {
+                            if( p_rec->attribute[yy].value_ptr > pad_ptr )
+                                p_rec->attribute[yy].value_ptr -= len;
+                        }
+                    }
+
+                    /* Found it. Shift everything up one */
+                    p_rec->num_attributes--;
+
+                    for (yy = xx; yy < p_rec->num_attributes; yy++, p_attr++)
+                    {
+                        *p_attr = *(p_attr + 1);
+                    }
+
+                    /* adjust attribute values if needed */
+                    if (len)
+                    {
+                        xx = (p_rec->free_pad_ptr - ((pad_ptr+len) -
+                                                  &p_rec->attr_pad[0]));
+                        for( yy=0; yy<xx; yy++, pad_ptr++)
+                            *pad_ptr = *(pad_ptr+len);
+                        p_rec->free_pad_ptr -= len;
+                    }
+                    return (TRUE);
+                }
+            }
+        }
+    }
+#endif
+    /* If here, not found */
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         SDP_ReadRecord
+**
+** Description      This function is called to get the raw data of the record
+**                  with the given handle from the database.
+**
+** Returns          -1, if the record is not found.
+**                  Otherwise, the offset (0 or 1) to start of data in p_data.
+**
+**                  The size of data copied into p_data is in *p_data_len.
+**
+*******************************************************************************/
+#if (SDP_RAW_DATA_INCLUDED == TRUE)
+INT32 SDP_ReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len)
+{
+    INT32           len = 0;                        /* Number of bytes in the entry */
+    INT32           offset = -1; /* default to not found */
+#if SDP_SERVER_ENABLED == TRUE
+    tSDP_RECORD     *p_rec;
+    UINT16          start = 0;
+    UINT16          end = 0xffff;
+    tSDP_ATTRIBUTE  *p_attr;
+    UINT16          rem_len;
+    UINT8           *p_rsp;
+
+    /* Find the record in the database */
+    p_rec = sdp_db_find_record(handle);
+    if(p_rec && p_data && p_data_len)
+    {
+        p_rsp = &p_data[3];
+        while ( (p_attr = sdp_db_find_attr_in_rec (p_rec, start, end)) != NULL)
+        {
+            /* Check if attribute fits. Assume 3-byte value type/length */
+            rem_len = *p_data_len - (UINT16) (p_rsp - p_data);
+
+            if (p_attr->len > (UINT32)(rem_len - 6))
+                break;
+
+            p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr);
+
+            /* next attr id */
+            start = p_attr->id + 1;
+        }
+        len = (INT32) (p_rsp - p_data);
+
+        /* Put in the sequence header (2 or 3 bytes) */
+        if (len > 255)
+        {
+            offset = 0;
+            p_data[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
+            p_data[1] = (UINT8) ((len - 3) >> 8);
+            p_data[2] = (UINT8) (len - 3);
+        }
+        else
+        {
+            offset = 1;
+
+            p_data[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+            p_data[2] = (UINT8) (len - 3);
+
+            len--;
+        }
+        *p_data_len = len;
+    }
+#endif
+    /* If here, not found */
+    return (offset);
+}
+#endif
+
+
+
diff --git a/stack/sdp/sdp_discovery.c b/stack/sdp/sdp_discovery.c
new file mode 100644
index 0000000..1ad1336
--- /dev/null
+++ b/stack/sdp/sdp_discovery.c
@@ -0,0 +1,1127 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  this file contains SDP discovery functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+#include "sdp_api.h"
+#include "sdpint.h"
+#include "btu.h"
+#include "btm_api.h"
+
+
+#ifndef SDP_DEBUG_RAW
+#define SDP_DEBUG_RAW       FALSE
+#endif
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+#if SDP_CLIENT_ENABLED == TRUE
+static void          process_service_search_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len);
+static void          process_service_attr_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len);
+static void          process_service_search_attr_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len);
+static UINT8         *save_attr_seq (tCONN_CB *p_ccb, UINT8 *p, UINT8 *p_msg_end);
+static tSDP_DISC_REC *add_record (tSDP_DISCOVERY_DB *p_db, BD_ADDR p_bda);
+static UINT8         *add_attr (UINT8 *p, tSDP_DISCOVERY_DB *p_db, tSDP_DISC_REC *p_rec,
+                                UINT16 attr_id, tSDP_DISC_ATTR *p_parent_attr, UINT8 nest_level);
+
+/* Safety check in case we go crazy */
+#define MAX_NEST_LEVELS     5
+
+
+/*******************************************************************************
+**
+** Function         sdpu_build_uuid_seq
+**
+** Description      This function builds a UUID sequence from the list of
+**                  passed UUIDs. It is also passed the address of the output
+**                  buffer.
+**
+** Returns          Pointer to next byte in the output buffer.
+**
+*******************************************************************************/
+static UINT8 *sdpu_build_uuid_seq (UINT8 *p_out, UINT16 num_uuids, tSDP_UUID *p_uuid_list)
+{
+    UINT16  xx;
+    UINT8   *p_len;
+
+    /* First thing is the data element header */
+    UINT8_TO_BE_STREAM  (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+
+    /* Remember where the length goes. Leave space for it. */
+    p_len = p_out;
+    p_out += 1;
+
+    /* Now, loop through and put in all the UUID(s) */
+    for (xx = 0; xx < num_uuids; xx++, p_uuid_list++)
+    {
+        if (p_uuid_list->len == 2)
+        {
+            UINT8_TO_BE_STREAM  (p_out, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+            UINT16_TO_BE_STREAM (p_out, p_uuid_list->uu.uuid16);
+        }
+        else if (p_uuid_list->len == 4)
+        {
+            UINT8_TO_BE_STREAM  (p_out, (UUID_DESC_TYPE << 3) | SIZE_FOUR_BYTES);
+            UINT32_TO_BE_STREAM (p_out, p_uuid_list->uu.uuid32);
+        }
+        else
+        {
+            UINT8_TO_BE_STREAM (p_out, (UUID_DESC_TYPE << 3) | SIZE_SIXTEEN_BYTES);
+            ARRAY_TO_BE_STREAM (p_out, p_uuid_list->uu.uuid128, p_uuid_list->len);
+        }
+    }
+
+    /* Now, put in the length */
+    xx = (UINT16)(p_out - p_len - 1);
+    UINT8_TO_BE_STREAM (p_len, xx);
+
+    return (p_out);
+}
+
+/*******************************************************************************
+**
+** Function         sdp_snd_service_search_req
+**
+** Description      Send a service search request to the SDP server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_snd_service_search_req(tCONN_CB *p_ccb, UINT8 cont_len, UINT8 * p_cont)
+{
+    UINT8           *p, *p_start, *p_param_len;
+    BT_HDR          *p_cmd;
+    UINT16          param_len;
+
+    /* Get a buffer to send the packet to L2CAP */
+    if ((p_cmd = (BT_HDR *) GKI_getpoolbuf (SDP_POOL_ID)) == NULL)
+    {
+        sdp_disconnect (p_ccb, SDP_NO_RESOURCES);
+        return;
+    }
+
+    p_cmd->offset = L2CAP_MIN_OFFSET;
+    p = p_start = (UINT8 *)(p_cmd + 1) + L2CAP_MIN_OFFSET;
+
+    /* Build a service search request packet */
+    UINT8_TO_BE_STREAM  (p, SDP_PDU_SERVICE_SEARCH_REQ);
+    UINT16_TO_BE_STREAM (p, p_ccb->transaction_id);
+    p_ccb->transaction_id++;
+
+    /* Skip the length, we need to add it at the end */
+    p_param_len = p;
+    p += 2;
+
+    /* Build the UID sequence. */
+#if (defined(SDP_BROWSE_PLUS) && SDP_BROWSE_PLUS == TRUE)
+    p = sdpu_build_uuid_seq (p, 1, &p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx]);
+#else
+    p = sdpu_build_uuid_seq (p, p_ccb->p_db->num_uuid_filters, p_ccb->p_db->uuid_filters);
+#endif
+
+    /* Set max service record count */
+    UINT16_TO_BE_STREAM (p, sdp_cb.max_recs_per_search);
+
+    /* Set continuation state */
+    UINT8_TO_BE_STREAM (p, cont_len);
+
+    /* if this is not the first request */
+    if(cont_len && p_cont)
+    {
+        memcpy(p, p_cont, cont_len);
+        p += cont_len;
+    }
+
+    /* Go back and put the parameter length into the buffer */
+    param_len = (UINT16)(p - p_param_len - 2);
+    UINT16_TO_BE_STREAM (p_param_len, param_len);
+
+    p_ccb->disc_state = SDP_DISC_WAIT_HANDLES;
+
+    /* Set the length of the SDP data in the buffer */
+    p_cmd->len = (UINT16)(p - p_start);
+
+#if (SDP_DEBUG_RAW == TRUE)
+    SDP_TRACE_WARNING2("sdp_snd_service_search_req cont_len :%d disc_state:%d",cont_len, p_ccb->disc_state);
+#endif
+
+
+    L2CA_DataWrite (p_ccb->connection_id, p_cmd);
+
+    /* Start inactivity timer */
+    btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+
+}
+
+/*******************************************************************************
+**
+** Function         sdp_disc_connected
+**
+** Description      This function is called when an SDP discovery attempt is
+**                  connected.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_disc_connected (tCONN_CB *p_ccb)
+{
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+    if (SDP_IS_PASS_THRU == p_ccb->is_attr_search)
+    {
+        tSDP_DISC_RES_CB *p_rcb = (tSDP_DISC_RES_CB *) p_ccb->p_db;
+        tSDP_DR_OPEN    evt_data;
+        /* report connected */
+        p_ccb->disc_state = SDP_DISC_WAIT_PASS_THRU;
+        if (p_rcb)
+        {
+            memcpy(evt_data.peer_addr, p_ccb->device_address, BD_ADDR_LEN);
+            evt_data.peer_mtu = p_ccb->rem_mtu_size;
+            (*p_rcb)(SDP_EVT_OPEN, (void *)&evt_data);
+        }
+    }
+    else
+#endif
+    if (p_ccb->is_attr_search)
+    {
+        p_ccb->disc_state = SDP_DISC_WAIT_SEARCH_ATTR;
+
+        process_service_search_attr_rsp (p_ccb, NULL, 0);
+    }
+    else
+    {
+        /* First step is to get a list of the handles from the server. */
+        /* We are not searching for a specific attribute, so we will   */
+        /* first search for the service, then get all attributes of it */
+
+        p_ccb->num_handles = 0;
+        sdp_snd_service_search_req(p_ccb, 0, NULL);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         sdp_disc_server_rsp
+**
+** Description      This function is called when there is a response from
+**                  the server.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_disc_server_rsp (tCONN_CB *p_ccb, BT_HDR *p_msg)
+{
+    UINT8           *p, rsp_pdu;
+    BOOLEAN         invalid_pdu = TRUE;
+
+#if (SDP_DEBUG_RAW == TRUE)
+    SDP_TRACE_WARNING1("sdp_disc_server_rsp disc_state:%d", p_ccb->disc_state);
+#endif
+
+    /* stop inactivity timer when we receive a response */
+    btu_stop_timer (&p_ccb->timer_entry);
+
+#if SDP_FOR_JV_INCLUDED == TRUE
+    if(SDP_IS_PASS_THRU == p_ccb->is_attr_search)
+    {
+        tSDP_DISC_RES_CB    *p_rcb = (tSDP_DISC_RES_CB *) p_ccb->p_db;
+        tSDP_DR_DATA        data;
+        if (p_rcb)
+        {
+            data.p_data   = (UINT8 *)(p_msg + 1) + p_msg->offset;
+            data.data_len = p_msg->len;
+            (*p_rcb)(SDP_EVT_DATA_IND, (void *)&data);
+        }
+        return;
+    }
+#endif
+
+    /* Got a reply!! Check what we got back */
+    p = (UINT8 *)(p_msg + 1) + p_msg->offset;
+
+    BE_STREAM_TO_UINT8 (rsp_pdu, p);
+
+    p_msg->len--;
+
+    switch (rsp_pdu)
+    {
+    case SDP_PDU_SERVICE_SEARCH_RSP:
+        if (p_ccb->disc_state == SDP_DISC_WAIT_HANDLES)
+        {
+            process_service_search_rsp (p_ccb, p, p_msg->len);
+            invalid_pdu = FALSE;
+        }
+        break;
+
+    case SDP_PDU_SERVICE_ATTR_RSP:
+        if (p_ccb->disc_state == SDP_DISC_WAIT_ATTR)
+        {
+            process_service_attr_rsp (p_ccb, p, p_msg->len);
+            invalid_pdu = FALSE;
+        }
+        break;
+
+    case SDP_PDU_SERVICE_SEARCH_ATTR_RSP:
+        if (p_ccb->disc_state == SDP_DISC_WAIT_SEARCH_ATTR)
+        {
+            process_service_search_attr_rsp (p_ccb, p, p_msg->len);
+            invalid_pdu = FALSE;
+        }
+        break;
+    }
+
+    if (invalid_pdu)
+    {
+        SDP_TRACE_WARNING2 ("SDP - Unexp. PDU: %d in state: %d", rsp_pdu, p_ccb->disc_state);
+        sdp_disconnect (p_ccb, SDP_GENERIC_ERROR);
+    }
+}
+
+/******************************************************************************
+**
+** Function         process_service_search_rsp
+**
+** Description      This function is called when there is a search response from
+**                  the server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_search_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len)
+{
+    UINT16      xx;
+    UINT16      total, cur_handles, orig;
+    UINT8       cont_len;
+
+    /* Skip transaction, and param len */
+    p_reply += 4;
+    BE_STREAM_TO_UINT16 (total, p_reply);
+    BE_STREAM_TO_UINT16 (cur_handles, p_reply);
+
+    orig = p_ccb->num_handles;
+    p_ccb->num_handles += cur_handles;
+    if (p_ccb->num_handles == 0)
+    {
+        SDP_TRACE_WARNING0 ("SDP - Rcvd ServiceSearchRsp, no matches");
+        sdp_disconnect (p_ccb, SDP_NO_RECS_MATCH);
+        return;
+    }
+
+    /* Save the handles that match. We will can only process a certain number. */
+    if (total > sdp_cb.max_recs_per_search)
+        total = sdp_cb.max_recs_per_search;
+    if (p_ccb->num_handles > sdp_cb.max_recs_per_search)
+        p_ccb->num_handles = sdp_cb.max_recs_per_search;
+
+    for (xx = orig; xx < p_ccb->num_handles; xx++)
+        BE_STREAM_TO_UINT32 (p_ccb->handles[xx], p_reply);
+
+    BE_STREAM_TO_UINT8 (cont_len, p_reply);
+    if(cont_len != 0)
+    {
+        if(cont_len > SDP_MAX_CONTINUATION_LEN)
+        {
+            sdp_disconnect (p_ccb, SDP_INVALID_CONT_STATE);
+            return;
+        }
+        /* stay in the same state */
+        sdp_snd_service_search_req(p_ccb, cont_len, p_reply);
+    }
+    else
+    {
+        /* change state */
+        p_ccb->disc_state = SDP_DISC_WAIT_ATTR;
+
+        /* Kick off the first attribute request */
+        process_service_attr_rsp (p_ccb, NULL, 0);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         sdp_copy_raw_data
+**
+** Description      copy the raw data
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+#if (SDP_RAW_DATA_INCLUDED == TRUE)
+static void sdp_copy_raw_data (tCONN_CB *p_ccb, UINT16 len, BOOLEAN offset)
+{
+    unsigned int    cpy_len;
+    UINT32          list_len;
+    UINT8           *p;
+    UINT8           * p_temp;
+    UINT8           type;
+    UINT32          delta_len = 0;
+
+#if (SDP_DEBUG_RAW == TRUE)
+    UINT8 num_array[SDP_MAX_LIST_BYTE_COUNT];
+    UINT32 i;
+
+    for (i = 0; i < p_ccb->list_len; i++)
+    {
+        sprintf((char *)&num_array[i*2],"%02X",(UINT8)(p_ccb->rsp_list[i]));
+    }
+    SDP_TRACE_WARNING1("result :%s",num_array);
+#endif
+
+    if(p_ccb->p_db->raw_data)
+    {
+        cpy_len = p_ccb->p_db->raw_size - p_ccb->p_db->raw_used;
+        list_len = p_ccb->list_len;
+        p_temp = p = &p_ccb->rsp_list[0];
+
+        if(offset)
+        {
+            type = *p++;
+            p = sdpu_get_len_from_type (p, type, &list_len);
+        }
+        if(list_len && list_len < cpy_len )
+        {
+            cpy_len = list_len;
+        }
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING4("list_len :%d cpy_len:%d raw_size:%d raw_used:%d",
+            list_len, cpy_len, p_ccb->p_db->raw_size, p_ccb->p_db->raw_used);
+#endif
+        memcpy (&p_ccb->p_db->raw_data[p_ccb->p_db->raw_used], p, cpy_len);
+        p_ccb->p_db->raw_used += cpy_len;
+    }
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         process_service_attr_rsp
+**
+** Description      This function is called when there is a attribute response from
+**                  the server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_attr_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len)
+{
+    UINT8           *p_start, *p_param_len;
+    UINT16          param_len, list_byte_count;
+    BOOLEAN         cont_request_needed = FALSE;
+
+#if (SDP_DEBUG_RAW == TRUE)
+    SDP_TRACE_WARNING2("process_service_attr_rsp len:%d raw inc:%d",
+        len, SDP_RAW_DATA_INCLUDED);
+#endif
+    /* If p_reply is NULL, we were called after the records handles were read */
+    if (p_reply)
+    {
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING4("ID & len: 0x%02x-%02x-%02x-%02x",
+            p_reply[0], p_reply[1], p_reply[2], p_reply[3]);
+#endif
+        /* Skip transaction ID and length */
+        p_reply += 4;
+
+        BE_STREAM_TO_UINT16 (list_byte_count, p_reply);
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING1("list_byte_count:%d", list_byte_count);
+#endif
+
+        /* Copy the response to the scratchpad. First, a safety check on the length */
+        if ((p_ccb->list_len + list_byte_count) > SDP_MAX_LIST_BYTE_COUNT)
+        {
+            sdp_disconnect (p_ccb, SDP_INVALID_PDU_SIZE);
+            return;
+        }
+
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING2("list_len: %d, list_byte_count: %d",
+            p_ccb->list_len, list_byte_count);
+#endif
+        if (p_ccb->rsp_list == NULL)
+        {
+            p_ccb->rsp_list = (UINT8 *)GKI_getbuf (SDP_MAX_LIST_BYTE_COUNT);
+            if (p_ccb->rsp_list == NULL)
+            {
+                SDP_TRACE_ERROR0 ("SDP - no gki buf to save rsp");
+                sdp_disconnect (p_ccb, SDP_NO_RESOURCES);
+                return;
+            }
+        }
+        memcpy (&p_ccb->rsp_list[p_ccb->list_len], p_reply, list_byte_count);
+        p_ccb->list_len += list_byte_count;
+        p_reply         += list_byte_count;
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING1("list_len: %d(attr_rsp)", p_ccb->list_len);
+
+        /* Check if we need to request a continuation */
+        SDP_TRACE_WARNING2("*p_reply:%d(%d)", *p_reply, SDP_MAX_CONTINUATION_LEN);
+#endif
+        if (*p_reply)
+        {
+            if (*p_reply > SDP_MAX_CONTINUATION_LEN)
+            {
+                sdp_disconnect (p_ccb, SDP_INVALID_CONT_STATE);
+                return;
+            }
+            cont_request_needed = TRUE;
+        }
+        else
+        {
+
+#if (SDP_RAW_DATA_INCLUDED == TRUE)
+            SDP_TRACE_WARNING0("process_service_attr_rsp");
+            sdp_copy_raw_data (p_ccb, len, FALSE);
+#endif
+
+            /* Save the response in the database. Stop on any error */
+            if (!save_attr_seq (p_ccb, &p_ccb->rsp_list[0], &p_ccb->rsp_list[p_ccb->list_len]))
+            {
+                sdp_disconnect (p_ccb, SDP_DB_FULL);
+                return;
+            }
+            p_ccb->list_len = 0;
+            p_ccb->cur_handle++;
+        }
+    }
+
+    /* Now, ask for the next handle. Re-use the buffer we just got. */
+    if (p_ccb->cur_handle < p_ccb->num_handles)
+    {
+        BT_HDR  *p_msg = (BT_HDR *) GKI_getpoolbuf (SDP_POOL_ID);
+        UINT8   *p;
+
+        if (!p_msg)
+        {
+            sdp_disconnect (p_ccb, SDP_NO_RESOURCES);
+            return;
+        }
+
+        p_msg->offset = L2CAP_MIN_OFFSET;
+        p = p_start = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+
+        /* Get all the attributes from the server */
+        UINT8_TO_BE_STREAM  (p, SDP_PDU_SERVICE_ATTR_REQ);
+        UINT16_TO_BE_STREAM (p, p_ccb->transaction_id);
+        p_ccb->transaction_id++;
+
+        /* Skip the length, we need to add it at the end */
+        p_param_len = p;
+        p += 2;
+
+        UINT32_TO_BE_STREAM (p, p_ccb->handles[p_ccb->cur_handle]);
+
+        /* Max attribute byte count */
+        UINT16_TO_BE_STREAM (p, sdp_cb.max_attr_list_size);
+
+        /* If no attribute filters, build a wildcard attribute sequence */
+        if (p_ccb->p_db->num_attr_filters)
+            p = sdpu_build_attrib_seq (p, p_ccb->p_db->attr_filters, p_ccb->p_db->num_attr_filters);
+        else
+            p = sdpu_build_attrib_seq (p, NULL, 0);
+
+        /* Was this a continuation request ? */
+        if (cont_request_needed)
+        {
+            memcpy (p, p_reply, *p_reply + 1);
+            p += *p_reply + 1;
+        }
+        else
+            UINT8_TO_BE_STREAM (p, 0);
+
+        /* Go back and put the parameter length into the buffer */
+        param_len = (UINT16)(p - p_param_len - 2);
+        UINT16_TO_BE_STREAM (p_param_len, param_len);
+
+        /* Set the length of the SDP data in the buffer */
+        p_msg->len = (UINT16)(p - p_start);
+
+
+        L2CA_DataWrite (p_ccb->connection_id, p_msg);
+
+        /* Start inactivity timer */
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+    }
+    else
+    {
+        sdp_disconnect (p_ccb, SDP_SUCCESS);
+        return;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         process_service_search_attr_rsp
+**
+** Description      This function is called when there is a search attribute
+**                  response from the server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_search_attr_rsp (tCONN_CB *p_ccb, UINT8 *p_reply, UINT16 len)
+{
+    UINT8           *p, *p_start, *p_end, *p_param_len;
+    UINT8           type;
+    UINT32          seq_len;
+    UINT16          param_len, lists_byte_count = 0;
+    BOOLEAN         cont_request_needed = FALSE;
+
+#if (SDP_DEBUG_RAW == TRUE)
+    SDP_TRACE_WARNING1("process_service_search_attr_rsp len:%d", len);
+#endif
+    /* If p_reply is NULL, we were called for the initial read */
+    if (p_reply)
+    {
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING4("ID & len: 0x%02x-%02x-%02x-%02x",
+            p_reply[0], p_reply[1], p_reply[2], p_reply[3]);
+#endif
+        /* Skip transaction ID and length */
+        p_reply += 4;
+
+        BE_STREAM_TO_UINT16 (lists_byte_count, p_reply);
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING1("lists_byte_count:%d", lists_byte_count);
+#endif
+
+        /* Copy the response to the scratchpad. First, a safety check on the length */
+        if ((p_ccb->list_len + lists_byte_count) > SDP_MAX_LIST_BYTE_COUNT)
+        {
+            sdp_disconnect (p_ccb, SDP_INVALID_PDU_SIZE);
+            return;
+        }
+
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING2("list_len: %d, list_byte_count: %d",
+            p_ccb->list_len, lists_byte_count);
+#endif
+        if (p_ccb->rsp_list == NULL)
+        {
+            p_ccb->rsp_list = (UINT8 *)GKI_getbuf (SDP_MAX_LIST_BYTE_COUNT);
+            if (p_ccb->rsp_list == NULL)
+            {
+                SDP_TRACE_ERROR0 ("SDP - no gki buf to save rsp");
+                sdp_disconnect (p_ccb, SDP_NO_RESOURCES);
+                return;
+            }
+        }
+        memcpy (&p_ccb->rsp_list[p_ccb->list_len], p_reply, lists_byte_count);
+        p_ccb->list_len += lists_byte_count;
+        p_reply         += lists_byte_count;
+#if (SDP_DEBUG_RAW == TRUE)
+        SDP_TRACE_WARNING1("list_len: %d(search_attr_rsp)", p_ccb->list_len);
+
+        /* Check if we need to request a continuation */
+        SDP_TRACE_WARNING2("*p_reply:%d(%d)", *p_reply, SDP_MAX_CONTINUATION_LEN);
+#endif
+        if (*p_reply)
+        {
+            if (*p_reply > SDP_MAX_CONTINUATION_LEN)
+            {
+                sdp_disconnect (p_ccb, SDP_INVALID_CONT_STATE);
+                return;
+            }
+
+            cont_request_needed = TRUE;
+        }
+    }
+
+#if (SDP_DEBUG_RAW == TRUE)
+    SDP_TRACE_WARNING1("cont_request_needed:%d", cont_request_needed);
+#endif
+    /* If continuation request (or first time request) */
+    if ((cont_request_needed) || (!p_reply))
+    {
+        BT_HDR  *p_msg = (BT_HDR *) GKI_getpoolbuf (SDP_POOL_ID);
+        UINT8   *p;
+
+        if (!p_msg)
+        {
+            sdp_disconnect (p_ccb, SDP_NO_RESOURCES);
+            return;
+        }
+
+        p_msg->offset = L2CAP_MIN_OFFSET;
+        p = p_start = (UINT8 *)(p_msg + 1) + L2CAP_MIN_OFFSET;
+
+        /* Build a service search request packet */
+        UINT8_TO_BE_STREAM  (p, SDP_PDU_SERVICE_SEARCH_ATTR_REQ);
+        UINT16_TO_BE_STREAM (p, p_ccb->transaction_id);
+        p_ccb->transaction_id++;
+
+        /* Skip the length, we need to add it at the end */
+        p_param_len = p;
+        p += 2;
+
+        /* Build the UID sequence. */
+#if (defined(SDP_BROWSE_PLUS) && SDP_BROWSE_PLUS == TRUE)
+        p = sdpu_build_uuid_seq (p, 1, &p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx]);
+#else
+        p = sdpu_build_uuid_seq (p, p_ccb->p_db->num_uuid_filters, p_ccb->p_db->uuid_filters);
+#endif
+
+        /* Max attribute byte count */
+        UINT16_TO_BE_STREAM (p, sdp_cb.max_attr_list_size);
+
+        /* If no attribute filters, build a wildcard attribute sequence */
+        if (p_ccb->p_db->num_attr_filters)
+            p = sdpu_build_attrib_seq (p, p_ccb->p_db->attr_filters, p_ccb->p_db->num_attr_filters);
+        else
+            p = sdpu_build_attrib_seq (p, NULL, 0);
+
+        /* No continuation for first request */
+        if (p_reply)
+        {
+            memcpy (p, p_reply, *p_reply + 1);
+            p += *p_reply + 1;
+        }
+        else
+            UINT8_TO_BE_STREAM (p, 0);
+
+        /* Go back and put the parameter length into the buffer */
+        param_len = p - p_param_len - 2;
+        UINT16_TO_BE_STREAM (p_param_len, param_len);
+
+        /* Set the length of the SDP data in the buffer */
+        p_msg->len = p - p_start;
+
+
+        L2CA_DataWrite (p_ccb->connection_id, p_msg);
+
+        /* Start inactivity timer */
+        btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+
+        return;
+    }
+
+
+    /*******************************************************************/
+    /* We now have the full response, which is a sequence of sequences */
+    /*******************************************************************/
+
+#if (SDP_RAW_DATA_INCLUDED == TRUE)
+    SDP_TRACE_WARNING0("process_service_search_attr_rsp");
+    sdp_copy_raw_data (p_ccb, len, TRUE);
+#endif
+
+    p = &p_ccb->rsp_list[0];
+
+    /* The contents is a sequence of attribute sequences */
+    type = *p++;
+
+    if ((type >> 3) != DATA_ELE_SEQ_DESC_TYPE)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Wrong type: 0x%02x in attr_rsp", type);
+        return;
+    }
+    p = sdpu_get_len_from_type (p, type, &seq_len);
+
+    p_end = &p_ccb->rsp_list[p_ccb->list_len];
+
+    if ((p + seq_len) != p_end)
+    {
+        sdp_disconnect (p_ccb, SDP_INVALID_CONT_STATE);
+        return;
+    }
+
+    while (p < p_end)
+    {
+        p = save_attr_seq (p_ccb, p, &p_ccb->rsp_list[p_ccb->list_len]);
+        if (!p)
+        {
+            sdp_disconnect (p_ccb, SDP_DB_FULL);
+            return;
+        }
+    }
+
+    /* Since we got everything we need, disconnect the call */
+    sdp_disconnect (p_ccb, SDP_SUCCESS);
+}
+
+/*******************************************************************************
+**
+** Function         save_attr_seq
+**
+** Description      This function is called when there is a response from
+**                  the server.
+**
+** Returns          pointer to next byte or NULL if error
+**
+*******************************************************************************/
+static UINT8 *save_attr_seq (tCONN_CB *p_ccb, UINT8 *p, UINT8 *p_msg_end)
+{
+    UINT32      seq_len, attr_len;
+    UINT16      attr_id;
+    UINT8       type, *p_seq_end;
+    tSDP_DISC_REC *p_rec;
+
+    type = *p++;
+
+    if ((type >> 3) != DATA_ELE_SEQ_DESC_TYPE)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Wrong type: 0x%02x in attr_rsp", type);
+        return (NULL);
+    }
+
+    p = sdpu_get_len_from_type (p, type, &seq_len);
+    if ((p + seq_len) > p_msg_end)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Bad len in attr_rsp %d", seq_len);
+        return (NULL);
+    }
+
+    /* Create a record */
+    p_rec = add_record (p_ccb->p_db, p_ccb->device_address);
+    if (!p_rec)
+    {
+        SDP_TRACE_WARNING0 ("SDP - DB full add_record");
+        return (NULL);
+    }
+
+    p_seq_end = p + seq_len;
+
+    while (p < p_seq_end)
+    {
+        /* First get the attribute ID */
+        type = *p++;
+        p = sdpu_get_len_from_type (p, type, &attr_len);
+        if (((type >> 3) != UINT_DESC_TYPE) || (attr_len != 2))
+        {
+            SDP_TRACE_WARNING2 ("SDP - Bad type: 0x%02x or len: %d in attr_rsp", type, attr_len);
+            return (NULL);
+        }
+        BE_STREAM_TO_UINT16 (attr_id, p);
+
+        /* Now, add the attribute value */
+        p = add_attr (p, p_ccb->p_db, p_rec, attr_id, NULL, 0);
+
+        if (!p)
+        {
+            SDP_TRACE_WARNING0 ("SDP - DB full add_attr");
+            return (NULL);
+        }
+    }
+
+    return (p);
+}
+
+
+/*******************************************************************************
+**
+** Function         add_record
+**
+** Description      This function allocates space for a record from the DB.
+**
+** Returns          pointer to next byte in data stream
+**
+*******************************************************************************/
+tSDP_DISC_REC *add_record (tSDP_DISCOVERY_DB *p_db, BD_ADDR p_bda)
+{
+    tSDP_DISC_REC   *p_rec;
+
+    /* See if there is enough space in the database */
+    if (p_db->mem_free < sizeof (tSDP_DISC_REC))
+        return (NULL);
+
+    p_rec = (tSDP_DISC_REC *) p_db->p_free_mem;
+    p_db->p_free_mem += sizeof (tSDP_DISC_REC);
+    p_db->mem_free   -= sizeof (tSDP_DISC_REC);
+
+    p_rec->p_first_attr = NULL;
+    p_rec->p_next_rec   = NULL;
+
+    memcpy (p_rec->remote_bd_addr, p_bda, BD_ADDR_LEN);
+
+    /* Add the record to the end of chain */
+    if (!p_db->p_first_rec)
+        p_db->p_first_rec = p_rec;
+    else
+    {
+        tSDP_DISC_REC   *p_rec1 = p_db->p_first_rec;
+
+        while (p_rec1->p_next_rec)
+            p_rec1 = p_rec1->p_next_rec;
+
+        p_rec1->p_next_rec = p_rec;
+    }
+
+    return (p_rec);
+}
+
+#define SDP_ADDITIONAL_LIST_MASK        0x80
+/*******************************************************************************
+**
+** Function         add_attr
+**
+** Description      This function allocates space for an attribute from the DB
+**                  and copies the data into it.
+**
+** Returns          pointer to next byte in data stream
+**
+*******************************************************************************/
+static UINT8 *add_attr (UINT8 *p, tSDP_DISCOVERY_DB *p_db, tSDP_DISC_REC *p_rec,
+                        UINT16 attr_id, tSDP_DISC_ATTR *p_parent_attr, UINT8 nest_level)
+{
+    tSDP_DISC_ATTR  *p_attr;
+    UINT32          attr_len;
+    UINT32          total_len;
+    UINT16          attr_type;
+    UINT16          id;
+    UINT8           type;
+    UINT8           *p_end;
+    UINT8           is_additional_list = nest_level & SDP_ADDITIONAL_LIST_MASK;
+
+    nest_level &= ~(SDP_ADDITIONAL_LIST_MASK);
+
+    type = *p++;
+    p = sdpu_get_len_from_type (p, type, &attr_len);
+
+    attr_len &= SDP_DISC_ATTR_LEN_MASK;
+    attr_type = (type >> 3) & 0x0f;
+
+    /* See if there is enough space in the database */
+    if (attr_len > 4)
+        total_len = attr_len - 4 + (UINT16)sizeof (tSDP_DISC_ATTR);
+    else
+        total_len = sizeof (tSDP_DISC_ATTR);
+
+    /* Ensure it is a multiple of 4 */
+    total_len = (total_len + 3) & ~3;
+
+    /* See if there is enough space in the database */
+    if (p_db->mem_free < total_len)
+        return (NULL);
+
+    p_attr                = (tSDP_DISC_ATTR *) p_db->p_free_mem;
+    p_attr->attr_id       = attr_id;
+    p_attr->attr_len_type = (UINT16)attr_len | (attr_type << 12);
+    p_attr->p_next_attr = NULL;
+
+    /* Store the attribute value */
+    switch (attr_type)
+    {
+    case UINT_DESC_TYPE:
+        if( (is_additional_list != 0) && (attr_len == 2) )
+        {
+            BE_STREAM_TO_UINT16 (id, p);
+            if(id != ATTR_ID_PROTOCOL_DESC_LIST)
+                p -= 2;
+            else
+            {
+                /* Reserve the memory for the attribute now, as we need to add sub-attributes */
+                p_db->p_free_mem += sizeof (tSDP_DISC_ATTR);
+                p_db->mem_free   -= sizeof (tSDP_DISC_ATTR);
+                p_end             = p + attr_len;
+                total_len         = 0;
+
+                /* SDP_TRACE_DEBUG1 ("SDP - attr nest level:%d(list)", nest_level); */
+                if (nest_level >= MAX_NEST_LEVELS)
+                {
+                    SDP_TRACE_ERROR0 ("SDP - attr nesting too deep");
+                    return (p_end);
+                }
+
+                /* Now, add the list entry */
+                p = add_attr (p, p_db, p_rec, ATTR_ID_PROTOCOL_DESC_LIST, p_attr, (UINT8)(nest_level + 1));
+
+                break;
+            }
+        }
+        /* Case falls through */
+
+    case TWO_COMP_INT_DESC_TYPE:
+        switch (attr_len)
+        {
+        case 1:
+            p_attr->attr_value.v.u8 = *p++;
+            break;
+        case 2:
+            BE_STREAM_TO_UINT16 (p_attr->attr_value.v.u16, p);
+            break;
+        case 4:
+            BE_STREAM_TO_UINT32 (p_attr->attr_value.v.u32, p);
+            break;
+        default:
+            BE_STREAM_TO_ARRAY (p, p_attr->attr_value.v.array, (INT32)attr_len);
+            break;
+        }
+        break;
+
+    case UUID_DESC_TYPE:
+        switch (attr_len)
+        {
+        case 2:
+            BE_STREAM_TO_UINT16 (p_attr->attr_value.v.u16, p);
+            break;
+        case 4:
+            BE_STREAM_TO_UINT32 (p_attr->attr_value.v.u32, p);
+            if (p_attr->attr_value.v.u32 < 0x10000)
+            {
+                attr_len = 2;
+                p_attr->attr_len_type = (UINT16)attr_len | (attr_type << 12);
+                p_attr->attr_value.v.u16 = (UINT16) p_attr->attr_value.v.u32;
+
+            }
+            break;
+        case 16:
+            /* See if we can compress his UUID down to 16 or 32bit UUIDs */
+            if (sdpu_is_base_uuid (p))
+            {
+                if ((p[0] == 0) && (p[1] == 0))
+                {
+                    p_attr->attr_len_type = (p_attr->attr_len_type & ~SDP_DISC_ATTR_LEN_MASK) | 2;
+                    p += 2;
+                    BE_STREAM_TO_UINT16 (p_attr->attr_value.v.u16, p);
+                    p += MAX_UUID_SIZE - 4;
+                }
+                else
+                {
+                    p_attr->attr_len_type = (p_attr->attr_len_type & ~SDP_DISC_ATTR_LEN_MASK) | 4;
+                    BE_STREAM_TO_UINT32 (p_attr->attr_value.v.u32, p);
+                    p += MAX_UUID_SIZE - 4;
+                }
+            }
+            else
+            {
+                 /* coverity[overrun-local] */
+                 /*
+                    Event overrun-local: Overrun of static array "p_attr->attr_value.v.array" of size 4 at position 15 with index variable "ijk"
+                    False-positive: SDP uses scratch buffer to hold the attribute value.
+                    The actual size of tSDP_DISC_ATVAL does not matter.
+                    If the array size in tSDP_DISC_ATVAL is increase, we would increase the system RAM usage unnecessarily
+                */
+                BE_STREAM_TO_ARRAY (p, p_attr->attr_value.v.array, (INT32)attr_len);
+            }
+            break;
+        default:
+            SDP_TRACE_WARNING1 ("SDP - bad len in UUID attr: %d", attr_len);
+            return (p + attr_len);
+        }
+        break;
+
+    case DATA_ELE_SEQ_DESC_TYPE:
+    case DATA_ELE_ALT_DESC_TYPE:
+        /* Reserve the memory for the attribute now, as we need to add sub-attributes */
+        p_db->p_free_mem += sizeof (tSDP_DISC_ATTR);
+        p_db->mem_free   -= sizeof (tSDP_DISC_ATTR);
+        p_end             = p + attr_len;
+        total_len         = 0;
+
+        /* SDP_TRACE_DEBUG1 ("SDP - attr nest level:%d", nest_level); */
+        if (nest_level >= MAX_NEST_LEVELS)
+        {
+            SDP_TRACE_ERROR0 ("SDP - attr nesting too deep");
+            return (p_end);
+        }
+        if(is_additional_list != 0 || attr_id == ATTR_ID_ADDITION_PROTO_DESC_LISTS)
+            nest_level |= SDP_ADDITIONAL_LIST_MASK;
+        /* SDP_TRACE_DEBUG1 ("SDP - attr nest level:0x%x(finish)", nest_level); */
+
+        while (p < p_end)
+        {
+            /* Now, add the list entry */
+            p = add_attr (p, p_db, p_rec, 0, p_attr, (UINT8)(nest_level + 1));
+
+            if (!p)
+                return (NULL);
+        }
+        break;
+
+    case TEXT_STR_DESC_TYPE:
+    case URL_DESC_TYPE:
+        BE_STREAM_TO_ARRAY (p, p_attr->attr_value.v.array, (INT32)attr_len);
+        break;
+
+    case BOOLEAN_DESC_TYPE:
+        switch (attr_len)
+        {
+        case 1:
+            p_attr->attr_value.v.u8 = *p++;
+            break;
+        default:
+            SDP_TRACE_WARNING1 ("SDP - bad len in boolean attr: %d", attr_len);
+            return (p + attr_len);
+        }
+        break;
+
+    default:    /* switch (attr_type) */
+        break;
+    }
+
+    p_db->p_free_mem += total_len;
+    p_db->mem_free   -= total_len;
+
+    /* Add the attribute to the end of the chain */
+    if (!p_parent_attr)
+    {
+        if (!p_rec->p_first_attr)
+            p_rec->p_first_attr = p_attr;
+        else
+        {
+            tSDP_DISC_ATTR  *p_attr1 = p_rec->p_first_attr;
+
+            while (p_attr1->p_next_attr)
+                p_attr1 = p_attr1->p_next_attr;
+
+            p_attr1->p_next_attr = p_attr;
+        }
+    }
+    else
+    {
+        if (!p_parent_attr->attr_value.v.p_sub_attr)
+        {
+            p_parent_attr->attr_value.v.p_sub_attr = p_attr;
+            /* SDP_TRACE_DEBUG4 ("parent:0x%x(id:%d), ch:0x%x(id:%d)",
+                p_parent_attr, p_parent_attr->attr_id, p_attr, p_attr->attr_id); */
+        }
+        else
+        {
+            tSDP_DISC_ATTR  *p_attr1 = p_parent_attr->attr_value.v.p_sub_attr;
+            /* SDP_TRACE_DEBUG4 ("parent:0x%x(id:%d), ch1:0x%x(id:%d)",
+                p_parent_attr, p_parent_attr->attr_id, p_attr1, p_attr1->attr_id); */
+
+            while (p_attr1->p_next_attr)
+                p_attr1 = p_attr1->p_next_attr;
+
+            p_attr1->p_next_attr = p_attr;
+            /* SDP_TRACE_DEBUG2 ("new ch:0x%x(id:%d)", p_attr, p_attr->attr_id); */
+        }
+    }
+
+    return (p);
+}
+
+#endif  /* CLIENT_ENABLED == TRUE */
diff --git a/stack/sdp/sdp_main.c b/stack/sdp/sdp_main.c
new file mode 100644
index 0000000..14cd39b
--- /dev/null
+++ b/stack/sdp/sdp_main.c
@@ -0,0 +1,724 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the main SDP functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "bt_target.h"
+#include "gki.h"
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "l2c_api.h"
+#include "l2cdefs.h"
+
+#include "btu.h"
+#include "btm_api.h"
+
+#include "sdp_api.h"
+#include "sdpint.h"
+
+
+/********************************************************************************/
+/*                       G L O B A L      S D P       D A T A                   */
+/********************************************************************************/
+#if SDP_DYNAMIC_MEMORY == FALSE
+tSDP_CB  sdp_cb;
+#endif
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void sdp_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm,
+                             UINT8 l2cap_id);
+static void sdp_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void sdp_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg);
+static void sdp_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed);
+static void sdp_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg);
+
+#if SDP_CLIENT_ENABLED == TRUE
+static void sdp_connect_cfm (UINT16 l2cap_cid, UINT16 result);
+static void sdp_disconnect_cfm (UINT16 l2cap_cid, UINT16 result);
+#else
+#define sdp_connect_cfm     NULL
+#define sdp_disconnect_cfm  NULL
+#endif
+
+
+/*******************************************************************************
+**
+** Function         sdp_init
+**
+** Description      This function initializes the SDP unit.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_init (void)
+{
+    /* Clears all structures and local SDP database (if Server is enabled) */
+    memset (&sdp_cb, 0, sizeof (tSDP_CB));
+
+    /* Initialize the L2CAP configuration. We only care about MTU and flush */
+    sdp_cb.l2cap_my_cfg.mtu_present       = TRUE;
+    sdp_cb.l2cap_my_cfg.mtu               = SDP_MTU_SIZE;
+    sdp_cb.l2cap_my_cfg.flush_to_present  = TRUE;
+    sdp_cb.l2cap_my_cfg.flush_to          = SDP_FLUSH_TO;
+
+    sdp_cb.max_attr_list_size             = SDP_MTU_SIZE - 16;
+    sdp_cb.max_recs_per_search            = SDP_MAX_DISC_SERVER_RECS;
+
+#if SDP_SERVER_ENABLED == TRUE
+    /* Register with Security Manager for the specific security level */
+    if (!BTM_SetSecurityLevel (FALSE, SDP_SERVICE_NAME, BTM_SEC_SERVICE_SDP_SERVER,
+                               SDP_SECURITY_LEVEL, SDP_PSM, 0, 0))
+    {
+        SDP_TRACE_ERROR0 ("Security Registration Server failed");
+        return;
+    }
+#endif
+
+#if SDP_CLIENT_ENABLED == TRUE
+    /* Register with Security Manager for the specific security level */
+    if (!BTM_SetSecurityLevel (TRUE, SDP_SERVICE_NAME, BTM_SEC_SERVICE_SDP_SERVER,
+                               SDP_SECURITY_LEVEL, SDP_PSM, 0, 0))
+    {
+        SDP_TRACE_ERROR0 ("Security Registration for Client failed");
+        return;
+    }
+#endif
+
+#if defined(SDP_INITIAL_TRACE_LEVEL)
+    sdp_cb.trace_level = SDP_INITIAL_TRACE_LEVEL;
+#else
+    sdp_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+
+    sdp_cb.reg_info.pL2CA_ConnectInd_Cb = sdp_connect_ind;
+    sdp_cb.reg_info.pL2CA_ConnectCfm_Cb = sdp_connect_cfm;
+    sdp_cb.reg_info.pL2CA_ConnectPnd_Cb = NULL;
+    sdp_cb.reg_info.pL2CA_ConfigInd_Cb  = sdp_config_ind;
+    sdp_cb.reg_info.pL2CA_ConfigCfm_Cb  = sdp_config_cfm;
+    sdp_cb.reg_info.pL2CA_DisconnectInd_Cb = sdp_disconnect_ind;
+    sdp_cb.reg_info.pL2CA_DisconnectCfm_Cb = sdp_disconnect_cfm;
+    sdp_cb.reg_info.pL2CA_QoSViolationInd_Cb = NULL;
+    sdp_cb.reg_info.pL2CA_DataInd_Cb = sdp_data_ind;
+    sdp_cb.reg_info.pL2CA_CongestionStatus_Cb = NULL;
+    sdp_cb.reg_info.pL2CA_TxComplete_Cb       = NULL;
+
+    /* Now, register with L2CAP */
+    if (!L2CA_Register (SDP_PSM, &sdp_cb.reg_info))
+    {
+        SDP_TRACE_ERROR0 ("SDP Registration failed");
+    }
+}
+
+#if (defined(SDP_DEBUG) && SDP_DEBUG == TRUE)
+/*******************************************************************************
+**
+** Function         sdp_set_max_attr_list_size
+**
+** Description      This function sets the max attribute list size to use
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT16 sdp_set_max_attr_list_size (UINT16 max_size)
+{
+    if (max_size > (sdp_cb.l2cap_my_cfg.mtu - 16) )
+        max_size = sdp_cb.l2cap_my_cfg.mtu - 16;
+
+    sdp_cb.max_attr_list_size  = max_size;
+
+    return sdp_cb.max_attr_list_size;
+}
+#endif
+
+/*******************************************************************************
+**
+** Function         sdp_connect_ind
+**
+** Description      This function handles an inbound connection indication
+**                  from L2CAP. This is the case where we are acting as a
+**                  server.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_connect_ind (BD_ADDR  bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id)
+{
+#if SDP_SERVER_ENABLED == TRUE
+    tCONN_CB    *p_ccb;
+
+    /* Allocate a new CCB. Return if none available. */
+    if ((p_ccb = sdpu_allocate_ccb()) == NULL)
+        return;
+
+    /* Transition to the next appropriate state, waiting for config setup. */
+    p_ccb->con_state = SDP_STATE_CFG_SETUP;
+
+    /* Save the BD Address and Channel ID. */
+    memcpy (&p_ccb->device_address[0], bd_addr, sizeof (BD_ADDR));
+    p_ccb->connection_id = l2cap_cid;
+
+    /* Send response to the L2CAP layer. */
+    L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK);
+    {
+        tL2CAP_CFG_INFO cfg = sdp_cb.l2cap_my_cfg;
+
+        if (cfg.fcr_present)
+        {
+            SDP_TRACE_DEBUG6("sdp_connect_ind:  mode %u, txwinsz %u, max_trans %u, rtrans_tout %u, mon_tout %u, mps %u",
+                        cfg.fcr.mode, cfg.fcr.tx_win_sz, cfg.fcr.max_transmit,
+                        cfg.fcr.rtrans_tout,cfg.fcr.mon_tout, cfg.fcr.mps);
+        }
+
+        if ((!L2CA_ConfigReq (l2cap_cid, &cfg)) && cfg.fcr_present
+             && cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            /* FCR not desired; try again in basic mode */
+            cfg.fcr.mode = L2CAP_FCR_BASIC_MODE;
+            cfg.fcr_present = FALSE;
+            L2CA_ConfigReq (l2cap_cid, &cfg);
+        }
+    }
+
+    SDP_TRACE_EVENT1 ("SDP - Rcvd L2CAP conn ind, sent config req, CID 0x%x", p_ccb->connection_id);
+#else   /* No server */
+    /* Reject the connection */
+    L2CA_ConnectRsp (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_NO_PSM, 0);
+#endif
+}
+
+#if SDP_CLIENT_ENABLED == TRUE
+/*******************************************************************************
+**
+** Function         sdp_connect_cfm
+**
+** Description      This function handles the connect confirm events
+**                  from L2CAP. This is the case when we are acting as a
+**                  client and have sent a connect request.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_connect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    tCONN_CB    *p_ccb;
+    tL2CAP_CFG_INFO cfg;
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) == NULL)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd conn cnf for unknown CID 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* If the connection response contains success status, then */
+    /* Transition to the next state and startup the timer.      */
+    if ((result == L2CAP_CONN_OK) && (p_ccb->con_state == SDP_STATE_CONN_SETUP))
+    {
+        p_ccb->con_state = SDP_STATE_CFG_SETUP;
+
+        cfg = sdp_cb.l2cap_my_cfg;
+
+        if (cfg.fcr_present)
+        {
+            SDP_TRACE_DEBUG6("sdp_connect_cfm:  mode %u, txwinsz %u, max_trans %u, rtrans_tout %u, mon_tout %u, mps %u",
+                        cfg.fcr.mode, cfg.fcr.tx_win_sz, cfg.fcr.max_transmit,
+                        cfg.fcr.rtrans_tout,cfg.fcr.mon_tout, cfg.fcr.mps);
+        }
+
+        if ((!L2CA_ConfigReq (l2cap_cid, &cfg)) && cfg.fcr_present
+             && cfg.fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            /* FCR not desired; try again in basic mode */
+            cfg.fcr_present = FALSE;
+            cfg.fcr.mode = L2CAP_FCR_BASIC_MODE;
+            L2CA_ConfigReq (l2cap_cid, &cfg);
+        }
+
+        SDP_TRACE_EVENT1 ("SDP - got conn cnf, sent cfg req, CID: 0x%x", p_ccb->connection_id);
+    }
+    else
+    {
+        SDP_TRACE_WARNING2 ("SDP - Rcvd conn cnf with error: 0x%x  CID 0x%x", result, p_ccb->connection_id);
+
+        /* Tell the user if he has a callback */
+        if (p_ccb->p_cb || p_ccb->p_cb2)
+        {
+            UINT16 err = -1;
+            if ((result == HCI_ERR_HOST_REJECT_SECURITY)
+             || (result == HCI_ERR_AUTH_FAILURE)
+             || (result == HCI_ERR_PAIRING_NOT_ALLOWED)
+             || (result == HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED)
+             || (result == HCI_ERR_KEY_MISSING))
+                err = SDP_SECURITY_ERR;
+            else if (result == HCI_ERR_HOST_REJECT_DEVICE)
+                err = SDP_CONN_REJECTED;
+            else
+                err = SDP_CONN_FAILED;
+            if(p_ccb->p_cb)
+                (*p_ccb->p_cb)(err);
+            else if(p_ccb->p_cb2)
+                (*p_ccb->p_cb2)(err, p_ccb->user_data);
+
+        }
+        sdpu_release_ccb (p_ccb);
+    }
+}
+#endif  /* SDP_CLIENT_ENABLED == TRUE */
+
+
+/*******************************************************************************
+**
+** Function         sdp_config_ind
+**
+** Description      This function processes the L2CAP configuration indication
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tCONN_CB    *p_ccb;
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) == NULL)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* Remember the remote MTU size */
+    if (!p_cfg->mtu_present)
+    {
+        /* use min(L2CAP_DEFAULT_MTU,SDP_MTU_SIZE) for GKI buffer size reasons */
+        p_ccb->rem_mtu_size = (L2CAP_DEFAULT_MTU > SDP_MTU_SIZE)?SDP_MTU_SIZE:L2CAP_DEFAULT_MTU;
+    }
+    else
+    {
+        if (p_cfg->mtu > SDP_MTU_SIZE)
+            p_ccb->rem_mtu_size = SDP_MTU_SIZE;
+        else
+            p_ccb->rem_mtu_size = p_cfg->mtu;
+    }
+
+    /* For now, always accept configuration from the other side */
+    p_cfg->flush_to_present = FALSE;
+    p_cfg->mtu_present      = FALSE;
+    p_cfg->result           = L2CAP_CFG_OK;
+
+    /* Check peer config request against our rfcomm configuration */
+    if (p_cfg->fcr_present)
+    {
+        /* Reject the window size if it is bigger than we want it to be */
+        if (p_cfg->fcr.mode != L2CAP_FCR_BASIC_MODE)
+        {
+            if (sdp_cb.l2cap_my_cfg.fcr.mode != L2CAP_FCR_BASIC_MODE
+                && p_cfg->fcr.tx_win_sz > sdp_cb.l2cap_my_cfg.fcr.tx_win_sz)
+            {
+                p_cfg->fcr.tx_win_sz = sdp_cb.l2cap_my_cfg.fcr.tx_win_sz;
+                p_cfg->result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+                SDP_TRACE_DEBUG0("sdp_config_ind(CONFIG) -> Please try again with SMALLER TX WINDOW");
+            }
+
+            /* Reject if locally we want basic and they don't */
+            if (sdp_cb.l2cap_my_cfg.fcr.mode == L2CAP_FCR_BASIC_MODE)
+            {
+                /* Ask for a new setup */
+                p_cfg->fcr.mode = L2CAP_FCR_BASIC_MODE;
+                p_cfg->result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
+                SDP_TRACE_DEBUG0("sdp_config_ind(CONFIG) -> Please try again with BASIC mode");
+            }
+            /* Remain in configure state and give the peer our desired configuration */
+            if (p_cfg->result != L2CAP_CFG_OK)
+            {
+                SDP_TRACE_WARNING1 ("SDP - Rcvd cfg ind, Unacceptable Parameters sent cfg cfm, CID: 0x%x", l2cap_cid);
+                L2CA_ConfigRsp (l2cap_cid, p_cfg);
+                return;
+            }
+        }
+        else    /* We agree with peer's request */
+            p_cfg->fcr_present = FALSE;
+    }
+
+    L2CA_ConfigRsp (l2cap_cid, p_cfg);
+
+    SDP_TRACE_EVENT1 ("SDP - Rcvd cfg ind, sent cfg cfm, CID: 0x%x", l2cap_cid);
+
+    p_ccb->con_flags |= SDP_FLAGS_HIS_CFG_DONE;
+
+    if (p_ccb->con_flags & SDP_FLAGS_MY_CFG_DONE)
+    {
+        p_ccb->con_state = SDP_STATE_CONNECTED;
+
+        if (p_ccb->con_flags & SDP_FLAGS_IS_ORIG)
+            sdp_disc_connected (p_ccb);
+        else
+            /* Start inactivity timer */
+            btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+    }
+
+}
+
+
+/*******************************************************************************
+**
+** Function         sdp_config_cfm
+**
+** Description      This function processes the L2CAP configuration confirmation
+**                  event.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg)
+{
+    tCONN_CB    *p_ccb;
+
+    SDP_TRACE_EVENT2 ("SDP - Rcvd cfg cfm, CID: 0x%x  Result: %d", l2cap_cid, p_cfg->result);
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) == NULL)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd L2CAP cfg ind, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    /* For now, always accept configuration from the other side */
+    if (p_cfg->result == L2CAP_CFG_OK)
+    {
+        p_ccb->con_flags |= SDP_FLAGS_MY_CFG_DONE;
+
+        if (p_ccb->con_flags & SDP_FLAGS_HIS_CFG_DONE)
+        {
+            p_ccb->con_state = SDP_STATE_CONNECTED;
+
+            if (p_ccb->con_flags & SDP_FLAGS_IS_ORIG)
+                sdp_disc_connected (p_ccb);
+            else
+                /* Start inactivity timer */
+                btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+        }
+    }
+    else
+    {
+        /* If peer has rejected FCR and suggested basic then try basic */
+        if (p_cfg->fcr_present)
+        {
+            tL2CAP_CFG_INFO cfg = sdp_cb.l2cap_my_cfg;
+            cfg.fcr_present = FALSE;
+            L2CA_ConfigReq (l2cap_cid, &cfg);
+
+            /* Remain in configure state */
+            return;
+        }
+
+#if SDP_CLIENT_ENABLED == TRUE
+        sdp_disconnect(p_ccb, SDP_CFG_FAILED);
+#endif
+    }
+}
+
+/*******************************************************************************
+**
+** Function         sdp_disconnect_ind
+**
+** Description      This function handles a disconnect event from L2CAP. If
+**                  requested to, we ack the disconnect before dropping the CCB
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed)
+{
+    tCONN_CB    *p_ccb;
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) == NULL)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd L2CAP disc, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    if (ack_needed)
+        L2CA_DisconnectRsp (l2cap_cid);
+
+    SDP_TRACE_EVENT1 ("SDP - Rcvd L2CAP disc, CID: 0x%x", l2cap_cid);
+#if SDP_CLIENT_ENABLED == TRUE
+    /* Tell the user if he has a callback */
+    if (p_ccb->p_cb)
+        (*p_ccb->p_cb) ((UINT16) ((p_ccb->con_state == SDP_STATE_CONNECTED) ?
+                        SDP_SUCCESS : SDP_CONN_FAILED));
+    else if (p_ccb->p_cb2)
+        (*p_ccb->p_cb2) ((UINT16) ((p_ccb->con_state == SDP_STATE_CONNECTED) ?
+                        SDP_SUCCESS : SDP_CONN_FAILED), p_ccb->user_data);
+
+#endif
+    sdpu_release_ccb (p_ccb);
+}
+
+/*******************************************************************************
+**
+** Function         sdp_data_ind
+**
+** Description      This function is called when data is received from L2CAP.
+**                  if we are the originator of the connection, we are the SDP
+**                  client, and the received message is queued up for the client.
+**
+**                  If we are the destination of the connection, we are the SDP
+**                  server, so the message is passed to the server processing
+**                  function.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg)
+{
+    tCONN_CB    *p_ccb;
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) != NULL)
+    {
+        if (p_ccb->con_state == SDP_STATE_CONNECTED)
+        {
+            if (p_ccb->con_flags & SDP_FLAGS_IS_ORIG)
+                sdp_disc_server_rsp (p_ccb, p_msg);
+            else
+                sdp_server_handle_client_req (p_ccb, p_msg);
+        }
+        else
+        {
+            SDP_TRACE_WARNING2 ("SDP - Ignored L2CAP data while in state: %d, CID: 0x%x",
+                                p_ccb->con_state, l2cap_cid);
+        }
+    }
+    else
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd L2CAP data, unknown CID: 0x%x", l2cap_cid);
+    }
+
+    GKI_freebuf (p_msg);
+}
+
+
+#if SDP_CLIENT_ENABLED == TRUE
+/*******************************************************************************
+**
+** Function         sdp_conn_originate
+**
+** Description      This function is called from the API to originate a
+**                  connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+tCONN_CB* sdp_conn_originate (UINT8 *p_bd_addr)
+{
+    tCONN_CB              *p_ccb;
+    UINT16                cid;
+
+    /* Allocate a new CCB. Return if none available. */
+    if ((p_ccb = sdpu_allocate_ccb()) == NULL)
+    {
+        SDP_TRACE_WARNING0 ("SDP - no spare CCB for orig");
+        return (NULL);
+    }
+
+    SDP_TRACE_EVENT0 ("SDP - Originate started");
+
+    /* We are the originator of this connection */
+    p_ccb->con_flags |= SDP_FLAGS_IS_ORIG;
+
+    /* Save the BD Address and Channel ID. */
+    memcpy (&p_ccb->device_address[0], p_bd_addr, sizeof (BD_ADDR));
+
+    /* Transition to the next appropriate state, waiting for connection confirm. */
+    p_ccb->con_state = SDP_STATE_CONN_SETUP;
+
+// btla-specific ++
+#ifndef ANDROID_APP_INCLUDED  /* Skip for Android: Do not need to set out_service for sdp, since sdp does not use sec. Prevents over-writing service_rec of a connection already in progress */
+    BTM_SetOutService(p_bd_addr, BTM_SEC_SERVICE_SDP_SERVER, 0);
+#endif
+// btla-specific --
+
+    cid = L2CA_ConnectReq (SDP_PSM, p_bd_addr);
+
+    /* Check if L2CAP started the connection process */
+    if (cid != 0)
+    {
+        p_ccb->connection_id = cid;
+
+        return (p_ccb);
+    }
+    else
+    {
+        SDP_TRACE_WARNING0 ("SDP - Originate failed");
+        sdpu_release_ccb (p_ccb);
+        return (NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         sdp_disconnect
+**
+** Description      This function disconnects a connection.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_disconnect (tCONN_CB*p_ccb, UINT16 reason)
+{
+#if (defined(SDP_BROWSE_PLUS) && SDP_BROWSE_PLUS == TRUE)
+
+    /* If we are browsing for multiple UUIDs ... */
+    if ((p_ccb->con_state == SDP_STATE_CONNECTED)
+     && (p_ccb->con_flags & SDP_FLAGS_IS_ORIG)
+     && ((reason == SDP_SUCCESS) || (reason == SDP_NO_RECS_MATCH)))
+    {
+        /* If the browse found something, do no more searching */
+        if ((p_ccb->cur_uuid_idx == 0) && (p_ccb->p_db->p_first_rec))
+            p_ccb->cur_uuid_idx = p_ccb->p_db->num_uuid_filters;
+
+        while (++p_ccb->cur_uuid_idx < p_ccb->p_db->num_uuid_filters)
+        {
+            /* Check we have not already found the UUID (maybe through browse) */
+            if ((p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx].len == 2)
+                && (SDP_FindServiceInDb (p_ccb->p_db,
+                        p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx].uu.uuid16,
+                        NULL)))
+                continue;
+
+            if ((p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx].len > 2)
+                && (SDP_FindServiceUUIDInDb (p_ccb->p_db,
+                        &p_ccb->p_db->uuid_filters[p_ccb->cur_uuid_idx], NULL)))
+                continue;
+
+            p_ccb->cur_handle = 0;
+
+            SDP_TRACE_EVENT1 ("SDP - looking for for more,  CID: 0x%x",
+                              p_ccb->connection_id);
+
+            sdp_disc_connected (p_ccb);
+            return;
+        }
+    }
+
+    if ((reason == SDP_NO_RECS_MATCH) && (p_ccb->p_db->p_first_rec))
+        reason = SDP_SUCCESS;
+
+#endif
+
+    SDP_TRACE_EVENT1 ("SDP - disconnect  CID: 0x%x", p_ccb->connection_id);
+
+    /* Check if we have a connection ID */
+    if (p_ccb->connection_id != 0)
+    {
+        L2CA_DisconnectReq (p_ccb->connection_id);
+        p_ccb->disconnect_reason = reason;
+    }
+
+    /* If at setup state, we may not get callback ind from L2CAP */
+    /* Call user callback immediately */
+    if (p_ccb->con_state == SDP_STATE_CONN_SETUP)
+    {
+        /* Tell the user if he has a callback */
+        if (p_ccb->p_cb)
+            (*p_ccb->p_cb) (reason);
+        else if (p_ccb->p_cb2)
+            (*p_ccb->p_cb2) (reason, p_ccb->user_data);
+
+        sdpu_release_ccb (p_ccb);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         sdp_disconnect_cfm
+**
+** Description      This function handles a disconnect confirm event from L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void sdp_disconnect_cfm (UINT16 l2cap_cid, UINT16 result)
+{
+    tCONN_CB    *p_ccb;
+
+    /* Find CCB based on CID */
+    if ((p_ccb = sdpu_find_ccb_by_cid (l2cap_cid)) == NULL)
+    {
+        SDP_TRACE_WARNING1 ("SDP - Rcvd L2CAP disc cfm, unknown CID: 0x%x", l2cap_cid);
+        return;
+    }
+
+    SDP_TRACE_EVENT1 ("SDP - Rcvd L2CAP disc cfm, CID: 0x%x", l2cap_cid);
+
+    /* Tell the user if he has a callback */
+    if (p_ccb->p_cb)
+        (*p_ccb->p_cb) (p_ccb->disconnect_reason);
+    else if (p_ccb->p_cb2)
+        (*p_ccb->p_cb2) (p_ccb->disconnect_reason, p_ccb->user_data);
+
+
+    sdpu_release_ccb (p_ccb);
+}
+
+#endif  /* SDP_CLIENT_ENABLED == TRUE */
+
+/*******************************************************************************
+**
+** Function         sdp_conn_timeout
+**
+** Description      This function processes a timeout. Currently, we simply send
+**                  a disconnect request to L2CAP.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_conn_timeout (tCONN_CB*p_ccb)
+{
+    SDP_TRACE_EVENT2 ("SDP - CCB timeout in state: %d  CID: 0x%x",
+                      p_ccb->con_state, p_ccb->connection_id);
+
+    L2CA_DisconnectReq (p_ccb->connection_id);
+#if SDP_CLIENT_ENABLED == TRUE
+    /* Tell the user if he has a callback */
+    if (p_ccb->p_cb)
+        (*p_ccb->p_cb) (SDP_CONN_FAILED);
+    else if (p_ccb->p_cb2)
+        (*p_ccb->p_cb2) (SDP_CONN_FAILED, p_ccb->user_data);
+#endif
+    sdpu_release_ccb (p_ccb);
+}
+
+
+
+
diff --git a/stack/sdp/sdp_server.c b/stack/sdp/sdp_server.c
new file mode 100644
index 0000000..5736b8d
--- /dev/null
+++ b/stack/sdp/sdp_server.c
@@ -0,0 +1,835 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions that handle the SDP server functions.
+ *  This is mainly dealing with client requests
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+#include "btu.h"
+
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "sdp_api.h"
+#include "sdpint.h"
+
+
+#if SDP_SERVER_ENABLED == TRUE
+
+/* Maximum number of bytes to reserve out of SDP MTU for response data */
+#define SDP_MAX_SERVICE_RSPHDR_LEN      12
+#define SDP_MAX_SERVATTR_RSPHDR_LEN     10
+#define SDP_MAX_ATTR_RSPHDR_LEN         10
+
+/********************************************************************************/
+/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
+/********************************************************************************/
+static void process_service_search (tCONN_CB *p_ccb, UINT16 trans_num,
+                                    UINT16 param_len, UINT8 *p_req,
+                                    UINT8 *p_req_end);
+
+static void process_service_attr_req (tCONN_CB *p_ccb, UINT16 trans_num,
+                                      UINT16 param_len, UINT8 *p_req,
+                                      UINT8 *p_req_end);
+
+static void process_service_search_attr_req (tCONN_CB *p_ccb, UINT16 trans_num,
+                                             UINT16 param_len, UINT8 *p_req,
+                                             UINT8 *p_req_end);
+
+
+/********************************************************************************/
+/*                  E R R O R   T E X T   S T R I N G S                         */
+/*                                                                              */
+/* The default is to have no text string, but we allow the strings to be        */
+/* configured in target.h if people want them.                                  */
+/********************************************************************************/
+#ifndef SDP_TEXT_BAD_HEADER
+#define SDP_TEXT_BAD_HEADER     NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_PDU
+#define SDP_TEXT_BAD_PDU        NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_UUID_LIST
+#define SDP_TEXT_BAD_UUID_LIST  NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_HANDLE
+#define SDP_TEXT_BAD_HANDLE     NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_ATTR_LIST
+#define SDP_TEXT_BAD_ATTR_LIST  NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_CONT_LEN
+#define SDP_TEXT_BAD_CONT_LEN   NULL
+#endif
+
+#ifndef SDP_TEXT_BAD_CONT_INX
+#define SDP_TEXT_BAD_CONT_INX   NULL
+#endif
+
+/*******************************************************************************
+**
+** Function         sdp_server_handle_client_req
+**
+** Description      This is the main dispatcher of the SDP server. It is called
+**                  when any data is received from L2CAP, and dispatches the
+**                  request to the appropriate handler.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdp_server_handle_client_req (tCONN_CB *p_ccb, BT_HDR *p_msg)
+{
+    UINT8   *p_req     = (UINT8 *) (p_msg + 1) + p_msg->offset;
+    UINT8   *p_req_end = p_req + p_msg->len;
+    UINT8   pdu_id;
+    UINT16  trans_num, param_len;
+
+
+    /* Start inactivity timer */
+    btu_start_timer (&p_ccb->timer_entry, BTU_TTYPE_SDP, SDP_INACT_TIMEOUT);
+
+    /* The first byte in the message is the pdu type */
+    pdu_id = *p_req++;
+
+    /* Extract the transaction number and parameter length */
+    BE_STREAM_TO_UINT16 (trans_num, p_req);
+    BE_STREAM_TO_UINT16 (param_len, p_req);
+
+    if ((p_req + param_len) > p_req_end)
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_PDU_SIZE, SDP_TEXT_BAD_HEADER);
+        return;
+    }
+
+    switch (pdu_id)
+    {
+    case SDP_PDU_SERVICE_SEARCH_REQ:
+        process_service_search (p_ccb, trans_num, param_len, p_req, p_req_end);
+        break;
+
+    case SDP_PDU_SERVICE_ATTR_REQ:
+        process_service_attr_req (p_ccb, trans_num, param_len, p_req, p_req_end);
+        break;
+
+    case SDP_PDU_SERVICE_SEARCH_ATTR_REQ:
+        process_service_search_attr_req (p_ccb, trans_num, param_len, p_req, p_req_end);
+        break;
+
+    default:
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_PDU);
+        SDP_TRACE_WARNING1 ("SDP - server got unknown PDU: 0x%x", pdu_id);
+        break;
+    }
+}
+
+
+
+/*******************************************************************************
+**
+** Function         process_service_search
+**
+** Description      This function handles a service search request from the
+**                  client. It builds a reply message with info from the database,
+**                  and sends the reply back to the client.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_search (tCONN_CB *p_ccb, UINT16 trans_num,
+                                    UINT16 param_len, UINT8 *p_req,
+                                    UINT8 *p_req_end)
+{
+    UINT16          max_replies, cur_handles, rem_handles, cont_offset;
+    tSDP_UUID_SEQ   uid_seq;
+    UINT8           *p_rsp, *p_rsp_start, *p_rsp_param_len;
+    UINT16          rsp_param_len, num_rsp_handles, xx;
+    UINT32          rsp_handles[SDP_MAX_RECORDS];
+    tSDP_RECORD    *p_rec = NULL;
+    BT_HDR         *p_buf;
+    BOOLEAN         is_cont = FALSE;
+
+    p_req = sdpu_extract_uid_seq (p_req, param_len, &uid_seq);
+
+    if ((!p_req) || (!uid_seq.num_uids))
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_UUID_LIST);
+        return;
+    }
+
+    /* Get the max replies we can send. Cap it at our max anyways. */
+    BE_STREAM_TO_UINT16 (max_replies, p_req);
+
+    if (max_replies > SDP_MAX_RECORDS)
+        max_replies = SDP_MAX_RECORDS;
+
+    /* Get a list of handles that match the UUIDs given to us */
+    for (num_rsp_handles = 0; num_rsp_handles < max_replies; )
+    {
+        p_rec = sdp_db_service_search (p_rec, &uid_seq);
+
+        if (p_rec)
+            rsp_handles[num_rsp_handles++] = p_rec->record_handle;
+        else
+            break;
+    }
+
+    /* Check if this is a continuation request */
+    if (*p_req)
+    {
+        if (*p_req++ != SDP_CONTINUATION_LEN)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE,
+                                     SDP_TEXT_BAD_CONT_LEN);
+            return;
+        }
+        BE_STREAM_TO_UINT16 (cont_offset, p_req);
+
+        if (cont_offset != p_ccb->cont_offset)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE,
+                                     SDP_TEXT_BAD_CONT_INX);
+            return;
+        }
+
+        rem_handles = num_rsp_handles - cont_offset;    /* extract the remaining handles */
+    }
+    else
+    {
+        rem_handles = num_rsp_handles;
+        cont_offset = 0;
+    }
+
+    /* Calculate how many handles will fit in one PDU */
+    cur_handles = (UINT16)((p_ccb->rem_mtu_size - SDP_MAX_SERVICE_RSPHDR_LEN) / 4);
+
+    if (rem_handles <= cur_handles)
+        cur_handles = rem_handles;
+    else /* Continuation is set */
+    {
+        p_ccb->cont_offset += cur_handles;
+        is_cont = TRUE;
+    }
+
+    /* Get a buffer to use to build the response */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL)
+    {
+        SDP_TRACE_ERROR0 ("SDP - no buf for search rsp");
+        return;
+    }
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Start building a rsponse */
+    UINT8_TO_BE_STREAM  (p_rsp, SDP_PDU_SERVICE_SEARCH_RSP);
+    UINT16_TO_BE_STREAM (p_rsp, trans_num);
+
+    /* Skip the length, we need to add it at the end */
+    p_rsp_param_len = p_rsp;
+    p_rsp += 2;
+
+    /* Put in total and current number of handles, and handles themselves */
+    UINT16_TO_BE_STREAM (p_rsp, num_rsp_handles);
+    UINT16_TO_BE_STREAM (p_rsp, cur_handles);
+
+/*    SDP_TRACE_DEBUG5("SDP Service Rsp: tothdl %d, curhdlr %d, start %d, end %d, cont %d",
+                     num_rsp_handles, cur_handles, cont_offset,
+                     cont_offset + cur_handles-1, is_cont); */
+    for (xx = cont_offset; xx < cont_offset + cur_handles; xx++)
+        UINT32_TO_BE_STREAM (p_rsp, rsp_handles[xx]);
+
+    if (is_cont)
+    {
+        UINT8_TO_BE_STREAM  (p_rsp, SDP_CONTINUATION_LEN);
+        UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset);
+    }
+    else
+        UINT8_TO_BE_STREAM (p_rsp, 0);
+
+    /* Go back and put the parameter length into the buffer */
+    rsp_param_len = p_rsp - p_rsp_param_len - 2;
+    UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len);
+
+    /* Set the length of the SDP data in the buffer */
+    p_buf->len = p_rsp - p_rsp_start;
+
+
+    /* Send the buffer through L2CAP */
+    L2CA_DataWrite (p_ccb->connection_id, p_buf);
+}
+
+
+/*******************************************************************************
+**
+** Function         process_service_attr_req
+**
+** Description      This function handles an attribute request from the client.
+**                  It builds a reply message with info from the database,
+**                  and sends the reply back to the client.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_attr_req (tCONN_CB *p_ccb, UINT16 trans_num,
+                                      UINT16 param_len, UINT8 *p_req,
+                                      UINT8 *p_req_end)
+{
+    UINT16          max_list_len, len_to_send, cont_offset;
+    INT16           rem_len;
+    tSDP_ATTR_SEQ   attr_seq, attr_seq_sav;
+    UINT8           *p_rsp, *p_rsp_start, *p_rsp_param_len;
+    UINT16          rsp_param_len, xx;
+    UINT32          rec_handle;
+    tSDP_RECORD     *p_rec;
+    tSDP_ATTRIBUTE  *p_attr;
+    BT_HDR          *p_buf;
+    BOOLEAN         is_cont = FALSE;
+    UINT16          attr_len;
+
+    /* Extract the record handle */
+    BE_STREAM_TO_UINT32 (rec_handle, p_req);
+
+    if (p_req > p_req_end)
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_SERV_REC_HDL, SDP_TEXT_BAD_HANDLE);
+        return;
+    }
+
+    /* Get the max list length we can send. Cap it at MTU size minus overhead */
+    BE_STREAM_TO_UINT16 (max_list_len, p_req);
+
+    if (max_list_len > (p_ccb->rem_mtu_size - SDP_MAX_ATTR_RSPHDR_LEN))
+        max_list_len = p_ccb->rem_mtu_size - SDP_MAX_ATTR_RSPHDR_LEN;
+
+    p_req = sdpu_extract_attr_seq (p_req, param_len, &attr_seq);
+
+    if ((!p_req) || (!attr_seq.num_attr) || (p_req > p_req_end))
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_ATTR_LIST);
+        return;
+    }
+
+    memcpy(&attr_seq_sav, &attr_seq, sizeof(tSDP_ATTR_SEQ)) ;
+
+    /* Find a record with the record handle */
+    p_rec = sdp_db_find_record (rec_handle);
+    if (!p_rec)
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_SERV_REC_HDL, SDP_TEXT_BAD_HANDLE);
+        return;
+    }
+
+    /* Check if this is a continuation request */
+    if (*p_req)
+    {
+        if (*p_req++ != SDP_CONTINUATION_LEN)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_LEN);
+            return;
+        }
+        BE_STREAM_TO_UINT16 (cont_offset, p_req);
+
+        if (cont_offset != p_ccb->cont_offset)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_INX);
+            return;
+        }
+
+        if (!p_ccb->rsp_list)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL);
+            return;
+        }
+        is_cont = TRUE;
+
+        /* Initialise for continuation response */
+        p_rsp = &p_ccb->rsp_list[0];
+        attr_seq.attr_entry[p_ccb->cont_info.next_attr_index].start = p_ccb->cont_info.next_attr_start_id;
+    }
+    else
+    {
+        /* Get a scratch buffer to store response */
+        if (!p_ccb->rsp_list)
+        {
+            p_ccb->rsp_list = (UINT8 *)GKI_getbuf (max_list_len);
+            if (p_ccb->rsp_list == NULL)
+            {
+                SDP_TRACE_ERROR0 ("SDP - no scratch buf for search rsp");
+                return;
+            }
+        }
+
+        p_ccb->cont_offset = 0;
+        p_rsp = &p_ccb->rsp_list[3];            /* Leave space for data elem descr */
+
+        /* Reset continuation parameters in p_ccb */
+        p_ccb->cont_info.prev_sdp_rec = NULL;
+        p_ccb->cont_info.next_attr_index = 0;
+        p_ccb->cont_info.attr_offset = 0;
+    }
+
+    /* Search for attributes that match the list given to us */
+    for (xx = p_ccb->cont_info.next_attr_index; xx < attr_seq.num_attr; xx++)
+    {
+        p_attr = sdp_db_find_attr_in_rec (p_rec, attr_seq.attr_entry[xx].start, attr_seq.attr_entry[xx].end);
+
+        if (p_attr)
+        {
+            /* Check if attribute fits. Assume 3-byte value type/length */
+            rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]);
+
+            /* just in case */
+            if (rem_len <= 0)
+            {
+                p_ccb->cont_info.next_attr_index = xx;
+                p_ccb->cont_info.next_attr_start_id = p_attr->id;
+                break;
+            }
+
+            attr_len = sdpu_get_attrib_entry_len(p_attr);
+            /* if there is a partial attribute pending to be sent */
+            if (p_ccb->cont_info.attr_offset)
+            {
+                p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, rem_len,
+                                                         &p_ccb->cont_info.attr_offset);
+
+                /* If the partial attrib could not been fully added yet */
+                if (p_ccb->cont_info.attr_offset != attr_len)
+                    break;
+                else /* If the partial attrib has been added in full by now */
+                    p_ccb->cont_info.attr_offset = 0; /* reset attr_offset */
+            }
+            else if (rem_len < attr_len) /* Not enough space for attr... so add partially */
+            {
+                if (attr_len >= MAX_ATTR_LEN)
+                {
+                    SDP_TRACE_ERROR2("SDP attr too big: max_list_len=%d,attr_len=%d", max_list_len, attr_len);
+                    sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL);
+                    return;
+                }
+
+                /* add the partial attribute if possible */
+                p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, (UINT16)rem_len,
+                                                         &p_ccb->cont_info.attr_offset);
+
+                p_ccb->cont_info.next_attr_index = xx;
+                p_ccb->cont_info.next_attr_start_id = p_attr->id;
+                break;
+            }
+            else /* build the whole attribute */
+                p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr);
+
+            /* If doing a range, stick with this one till no more attributes found */
+            if (attr_seq.attr_entry[xx].start != attr_seq.attr_entry[xx].end)
+            {
+                /* Update for next time through */
+                attr_seq.attr_entry[xx].start = p_attr->id + 1;
+
+                xx--;
+            }
+        }
+    }
+    /* If all the attributes have been accomodated in p_rsp,
+       reset next_attr_index */
+    if (xx == attr_seq.num_attr)
+        p_ccb->cont_info.next_attr_index = 0;
+
+    len_to_send = (UINT16) (p_rsp - &p_ccb->rsp_list[0]);
+    cont_offset = 0;
+
+    if (!is_cont)
+    {
+        p_ccb->list_len = sdpu_get_attrib_seq_len(p_rec, &attr_seq_sav) + 3;
+        /* Put in the sequence header (2 or 3 bytes) */
+        if (p_ccb->list_len > 255)
+        {
+            p_ccb->rsp_list[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
+            p_ccb->rsp_list[1] = (UINT8) ((p_ccb->list_len - 3) >> 8);
+            p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3);
+        }
+        else
+        {
+            cont_offset = 1;
+
+            p_ccb->rsp_list[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+            p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3);
+
+            p_ccb->list_len--;
+            len_to_send--;
+        }
+    }
+
+    /* Get a buffer to use to build the response */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL)
+    {
+        SDP_TRACE_ERROR0 ("SDP - no buf for search rsp");
+        return;
+    }
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Start building a rsponse */
+    UINT8_TO_BE_STREAM  (p_rsp, SDP_PDU_SERVICE_ATTR_RSP);
+    UINT16_TO_BE_STREAM (p_rsp, trans_num);
+
+    /* Skip the parameter length, add it when we know the length */
+    p_rsp_param_len = p_rsp;
+    p_rsp += 2;
+
+    UINT16_TO_BE_STREAM (p_rsp, len_to_send);
+
+    memcpy (p_rsp, &p_ccb->rsp_list[cont_offset], len_to_send);
+    p_rsp += len_to_send;
+
+    p_ccb->cont_offset += len_to_send;
+
+    /* If anything left to send, continuation needed */
+    if (p_ccb->cont_offset < p_ccb->list_len)
+    {
+        is_cont = TRUE;
+
+        UINT8_TO_BE_STREAM  (p_rsp, SDP_CONTINUATION_LEN);
+        UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset);
+    }
+    else
+        UINT8_TO_BE_STREAM (p_rsp, 0);
+
+    /* Go back and put the parameter length into the buffer */
+    rsp_param_len = p_rsp - p_rsp_param_len - 2;
+    UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len);
+
+    /* Set the length of the SDP data in the buffer */
+    p_buf->len = p_rsp - p_rsp_start;
+
+
+    /* Send the buffer through L2CAP */
+    L2CA_DataWrite (p_ccb->connection_id, p_buf);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         process_service_search_attr_req
+**
+** Description      This function handles a combined service search and attribute
+**                  read request from the client. It builds a reply message with
+**                  info from the database, and sends the reply back to the client.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void process_service_search_attr_req (tCONN_CB *p_ccb, UINT16 trans_num,
+                                             UINT16 param_len, UINT8 *p_req,
+                                             UINT8 *p_req_end)
+{
+    UINT16         max_list_len;
+    INT16          rem_len;
+    UINT16         len_to_send, cont_offset;
+    tSDP_UUID_SEQ   uid_seq;
+    UINT8           *p_rsp, *p_rsp_start, *p_rsp_param_len;
+    UINT16          rsp_param_len, xx;
+    tSDP_RECORD    *p_rec;
+    tSDP_ATTR_SEQ   attr_seq, attr_seq_sav;
+    tSDP_ATTRIBUTE *p_attr;
+    BT_HDR         *p_buf;
+    BOOLEAN         maxxed_out = FALSE, is_cont = FALSE;
+    UINT8           *p_seq_start;
+    UINT16          seq_len, attr_len;
+
+    /* Extract the UUID sequence to search for */
+    p_req = sdpu_extract_uid_seq (p_req, param_len, &uid_seq);
+
+    if ((!p_req) || (!uid_seq.num_uids))
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_UUID_LIST);
+        return;
+    }
+
+    /* Get the max list length we can send. Cap it at our max list length. */
+    BE_STREAM_TO_UINT16 (max_list_len, p_req);
+
+    if (max_list_len > (p_ccb->rem_mtu_size - SDP_MAX_SERVATTR_RSPHDR_LEN))
+        max_list_len = p_ccb->rem_mtu_size - SDP_MAX_SERVATTR_RSPHDR_LEN;
+
+    p_req = sdpu_extract_attr_seq (p_req, param_len, &attr_seq);
+
+    if ((!p_req) || (!attr_seq.num_attr))
+    {
+        sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_REQ_SYNTAX, SDP_TEXT_BAD_ATTR_LIST);
+        return;
+    }
+
+    memcpy(&attr_seq_sav, &attr_seq, sizeof(tSDP_ATTR_SEQ)) ;
+
+    /* Check if this is a continuation request */
+    if (*p_req)
+    {
+        if (*p_req++ != SDP_CONTINUATION_LEN)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_LEN);
+            return;
+        }
+        BE_STREAM_TO_UINT16 (cont_offset, p_req);
+
+        if (cont_offset != p_ccb->cont_offset)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_INVALID_CONT_STATE, SDP_TEXT_BAD_CONT_INX);
+            return;
+        }
+
+        if (!p_ccb->rsp_list)
+        {
+            sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL);
+            return;
+        }
+        is_cont = TRUE;
+
+        /* Initialise for continuation response */
+        p_rsp = &p_ccb->rsp_list[0];
+        attr_seq.attr_entry[p_ccb->cont_info.next_attr_index].start = p_ccb->cont_info.next_attr_start_id;
+    }
+    else
+    {
+        /* Get a scratch buffer to store response */
+        if (!p_ccb->rsp_list)
+        {
+            p_ccb->rsp_list = (UINT8 *)GKI_getbuf (max_list_len);
+            if (p_ccb->rsp_list == NULL)
+            {
+                SDP_TRACE_ERROR0 ("SDP - no scratch buf for search rsp");
+                return;
+            }
+        }
+
+        p_ccb->cont_offset = 0;
+        p_rsp = &p_ccb->rsp_list[3];            /* Leave space for data elem descr */
+
+        /* Reset continuation parameters in p_ccb */
+        p_ccb->cont_info.prev_sdp_rec = NULL;
+        p_ccb->cont_info.next_attr_index = 0;
+        p_ccb->cont_info.last_attr_seq_desc_sent = FALSE;
+        p_ccb->cont_info.attr_offset = 0;
+    }
+
+    /* Get a list of handles that match the UUIDs given to us */
+    for (p_rec = sdp_db_service_search (p_ccb->cont_info.prev_sdp_rec, &uid_seq); p_rec; p_rec = sdp_db_service_search (p_rec, &uid_seq))
+    {
+        /* Allow space for attribute sequence type and length */
+        p_seq_start = p_rsp;
+        if (p_ccb->cont_info.last_attr_seq_desc_sent == FALSE)
+        {
+            /* See if there is enough room to include a new service in the current response */
+            rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]);
+            if (rem_len < 3)
+            {
+                /* Not enough room. Update continuation info for next response */
+                p_ccb->cont_info.next_attr_index = 0;
+                p_ccb->cont_info.next_attr_start_id = attr_seq.attr_entry[0].start;
+                break;
+            }
+            p_rsp += 3;
+        }
+
+        /* Get a list of handles that match the UUIDs given to us */
+        for (xx = p_ccb->cont_info.next_attr_index; xx < attr_seq.num_attr; xx++)
+        {
+            p_attr = sdp_db_find_attr_in_rec (p_rec, attr_seq.attr_entry[xx].start, attr_seq.attr_entry[xx].end);
+
+            if (p_attr)
+            {
+                /* Check if attribute fits. Assume 3-byte value type/length */
+                rem_len = max_list_len - (INT16) (p_rsp - &p_ccb->rsp_list[0]);
+
+                /* just in case */
+                if (rem_len <= 0)
+                {
+                    p_ccb->cont_info.next_attr_index = xx;
+                    p_ccb->cont_info.next_attr_start_id = p_attr->id;
+                    maxxed_out = TRUE;
+                    break;
+                }
+
+                attr_len = sdpu_get_attrib_entry_len(p_attr);
+                /* if there is a partial attribute pending to be sent */
+                if (p_ccb->cont_info.attr_offset)
+                {
+                    p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, rem_len,
+                                                             &p_ccb->cont_info.attr_offset);
+
+                    /* If the partial attrib could not been fully added yet */
+                    if (p_ccb->cont_info.attr_offset != attr_len)
+                    {
+                        maxxed_out = TRUE;
+                        break;
+                    }
+                    else /* If the partial attrib has been added in full by now */
+                        p_ccb->cont_info.attr_offset = 0; /* reset attr_offset */
+                }
+                else if (rem_len < attr_len) /* Not enough space for attr... so add partially */
+                {
+                    if (attr_len >= MAX_ATTR_LEN)
+                    {
+                        SDP_TRACE_ERROR2("SDP attr too big: max_list_len=%d,attr_len=%d", max_list_len, attr_len);
+                        sdpu_build_n_send_error (p_ccb, trans_num, SDP_NO_RESOURCES, NULL);
+                        return;
+                    }
+
+                    /* add the partial attribute if possible */
+                    p_rsp = sdpu_build_partial_attrib_entry (p_rsp, p_attr, (UINT16)rem_len,
+                                                             &p_ccb->cont_info.attr_offset);
+
+                    p_ccb->cont_info.next_attr_index = xx;
+                    p_ccb->cont_info.next_attr_start_id = p_attr->id;
+                    maxxed_out = TRUE;
+                    break;
+                }
+                else /* build the whole attribute */
+                    p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr);
+
+                /* If doing a range, stick with this one till no more attributes found */
+                if (attr_seq.attr_entry[xx].start != attr_seq.attr_entry[xx].end)
+                {
+                    /* Update for next time through */
+                    attr_seq.attr_entry[xx].start = p_attr->id + 1;
+
+                    xx--;
+                }
+            }
+        }
+
+        /* Go back and put the type and length into the buffer */
+        if (p_ccb->cont_info.last_attr_seq_desc_sent == FALSE)
+        {
+            seq_len = sdpu_get_attrib_seq_len(p_rec, &attr_seq_sav);
+            if (seq_len != 0)
+            {
+                UINT8_TO_BE_STREAM  (p_seq_start, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
+                UINT16_TO_BE_STREAM (p_seq_start, seq_len);
+
+                if (maxxed_out)
+                    p_ccb->cont_info.last_attr_seq_desc_sent = TRUE;
+            }
+            else
+                p_rsp = p_seq_start;
+        }
+
+        if (maxxed_out)
+            break;
+
+        /* Restore the attr_seq to look for in the next sdp record */
+        memcpy(&attr_seq, &attr_seq_sav, sizeof(tSDP_ATTR_SEQ)) ;
+
+        /* Reset the next attr index */
+        p_ccb->cont_info.next_attr_index = 0;
+        p_ccb->cont_info.prev_sdp_rec = p_rec;
+        p_ccb->cont_info.last_attr_seq_desc_sent = FALSE;
+    }
+
+    /* response length */
+    len_to_send = (UINT16) (p_rsp - &p_ccb->rsp_list[0]);
+    cont_offset = 0;
+
+    /* If first response, insert sequence header */
+    if (!is_cont)
+    {
+        /* Get the total list length for requested uid and attribute sequence */
+        p_ccb->list_len = sdpu_get_list_len(&uid_seq, &attr_seq_sav) + 3;
+        /* Put in the sequence header (2 or 3 bytes) */
+        if (p_ccb->list_len > 255)
+        {
+            p_ccb->rsp_list[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
+            p_ccb->rsp_list[1] = (UINT8) ((p_ccb->list_len - 3) >> 8);
+            p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3);
+        }
+        else
+        {
+            cont_offset = 1;
+
+            p_ccb->rsp_list[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+            p_ccb->rsp_list[2] = (UINT8) (p_ccb->list_len - 3);
+
+            p_ccb->list_len--;
+            len_to_send--;
+        }
+    }
+
+    /* Get a buffer to use to build the response */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL)
+    {
+        SDP_TRACE_ERROR0 ("SDP - no buf for search rsp");
+        return;
+    }
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    /* Start building a rsponse */
+    UINT8_TO_BE_STREAM  (p_rsp, SDP_PDU_SERVICE_SEARCH_ATTR_RSP);
+    UINT16_TO_BE_STREAM (p_rsp, trans_num);
+
+    /* Skip the parameter length, add it when we know the length */
+    p_rsp_param_len = p_rsp;
+    p_rsp += 2;
+
+    /* Stream the list length to send */
+    UINT16_TO_BE_STREAM (p_rsp, len_to_send);
+
+    /* copy from rsp_list to the actual buffer to be sent */
+    memcpy (p_rsp, &p_ccb->rsp_list[cont_offset], len_to_send);
+    p_rsp += len_to_send;
+
+    p_ccb->cont_offset += len_to_send;
+
+    /* If anything left to send, continuation needed */
+    if (p_ccb->cont_offset < p_ccb->list_len)
+    {
+        is_cont = TRUE;
+
+        UINT8_TO_BE_STREAM  (p_rsp, SDP_CONTINUATION_LEN);
+        UINT16_TO_BE_STREAM (p_rsp, p_ccb->cont_offset);
+    }
+    else
+        UINT8_TO_BE_STREAM (p_rsp, 0);
+
+    /* Go back and put the parameter length into the buffer */
+    rsp_param_len = p_rsp - p_rsp_param_len - 2;
+    UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len);
+
+    /* Set the length of the SDP data in the buffer */
+    p_buf->len = p_rsp - p_rsp_start;
+
+
+    /* Send the buffer through L2CAP */
+    L2CA_DataWrite (p_ccb->connection_id, p_buf);
+}
+
+#endif  /* SDP_SERVER_ENABLED == TRUE */
diff --git a/stack/sdp/sdp_utils.c b/stack/sdp/sdp_utils.c
new file mode 100644
index 0000000..cda0570
--- /dev/null
+++ b/stack/sdp/sdp_utils.c
@@ -0,0 +1,1040 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains SDP utility functions
+ *
+ ******************************************************************************/
+
+#include <stdlib.h>
+#include <string.h>
+#include <netinet/in.h>
+#include <stdio.h>
+
+#include "gki.h"
+#include "bt_types.h"
+
+#include "l2cdefs.h"
+#include "hcidefs.h"
+#include "hcimsgs.h"
+
+#include "sdp_api.h"
+#include "sdpint.h"
+
+#include "btu.h"
+
+
+static const UINT8  sdp_base_uuid[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00,
+                                       0x80, 0x00, 0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB};
+
+/*******************************************************************************
+**
+** Function         sdpu_find_ccb_by_cid
+**
+** Description      This function searches the CCB table for an entry with the
+**                  passed CID.
+**
+** Returns          the CCB address, or NULL if not found.
+**
+*******************************************************************************/
+tCONN_CB *sdpu_find_ccb_by_cid (UINT16 cid)
+{
+    UINT16       xx;
+    tCONN_CB     *p_ccb;
+
+    /* Look through each connection control block */
+    for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++)
+    {
+        if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->connection_id == cid))
+            return (p_ccb);
+    }
+
+    /* If here, not found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_find_ccb_by_db
+**
+** Description      This function searches the CCB table for an entry with the
+**                  passed discovery db.
+**
+** Returns          the CCB address, or NULL if not found.
+**
+*******************************************************************************/
+tCONN_CB *sdpu_find_ccb_by_db (tSDP_DISCOVERY_DB *p_db)
+{
+#if SDP_CLIENT_ENABLED == TRUE
+    UINT16       xx;
+    tCONN_CB     *p_ccb;
+
+    if (p_db)
+    {
+        /* Look through each connection control block */
+        for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++)
+        {
+            if ((p_ccb->con_state != SDP_STATE_IDLE) && (p_ccb->p_db == p_db))
+                return (p_ccb);
+        }
+    }
+#endif
+    /* If here, not found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_allocate_ccb
+**
+** Description      This function allocates a new CCB.
+**
+** Returns          CCB address, or NULL if none available.
+**
+*******************************************************************************/
+tCONN_CB *sdpu_allocate_ccb (void)
+{
+    UINT16       xx;
+    tCONN_CB     *p_ccb;
+
+    /* Look through each connection control block for a free one */
+    for (xx = 0, p_ccb = sdp_cb.ccb; xx < SDP_MAX_CONNECTIONS; xx++, p_ccb++)
+    {
+        if (p_ccb->con_state == SDP_STATE_IDLE)
+        {
+            memset (p_ccb, 0, sizeof (tCONN_CB));
+
+            p_ccb->timer_entry.param = (UINT32) p_ccb;
+
+            return (p_ccb);
+        }
+    }
+
+    /* If here, no free CCB found */
+    return (NULL);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_release_ccb
+**
+** Description      This function releases a CCB.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdpu_release_ccb (tCONN_CB *p_ccb)
+{
+    /* Ensure timer is stopped */
+    btu_stop_timer (&p_ccb->timer_entry);
+
+    /* Drop any response pointer we may be holding */
+    p_ccb->con_state = SDP_STATE_IDLE;
+#if SDP_CLIENT_ENABLED == TRUE
+    p_ccb->is_attr_search = FALSE;
+#endif
+
+    /* Free the response buffer */
+    if (p_ccb->rsp_list)
+    {
+       SDP_TRACE_DEBUG0("releasing SDP rsp_list");
+
+        GKI_freebuf(p_ccb->rsp_list);
+        p_ccb->rsp_list = NULL;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_build_attrib_seq
+**
+** Description      This function builds an attribute sequence from the list of
+**                  passed attributes. It is also passed the address of the output
+**                  buffer.
+**
+** Returns          Pointer to next byte in the output buffer.
+**
+*******************************************************************************/
+UINT8 *sdpu_build_attrib_seq (UINT8 *p_out, UINT16 *p_attr, UINT16 num_attrs)
+{
+    UINT16  xx;
+
+    /* First thing is the data element header. See if the length fits 1 byte */
+    /* If no attributes, assume a 4-byte wildcard */
+    if (!p_attr)
+        xx = 5;
+    else
+        xx = num_attrs * 3;
+
+    if (xx > 255)
+    {
+        UINT8_TO_BE_STREAM  (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
+        UINT16_TO_BE_STREAM (p_out, xx);
+    }
+    else
+    {
+        UINT8_TO_BE_STREAM (p_out, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
+        UINT8_TO_BE_STREAM (p_out, xx);
+    }
+
+    /* If there are no attributes specified, assume caller wants wildcard */
+    if (!p_attr)
+    {
+        UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_FOUR_BYTES);
+        UINT16_TO_BE_STREAM (p_out, 0);
+        UINT16_TO_BE_STREAM (p_out, 0xFFFF);
+    }
+    else
+    {
+        /* Loop through and put in all the attributes(s) */
+        for (xx = 0; xx < num_attrs; xx++, p_attr++)
+        {
+            UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+            UINT16_TO_BE_STREAM (p_out, *p_attr);
+        }
+    }
+
+    return (p_out);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_build_attrib_entry
+**
+** Description      This function builds an attribute entry from the passed
+**                  attribute record. It is also passed the address of the output
+**                  buffer.
+**
+** Returns          Pointer to next byte in the output buffer.
+**
+*******************************************************************************/
+UINT8 *sdpu_build_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr)
+{
+    /* First, store the attribute ID. Goes as a UINT */
+    UINT8_TO_BE_STREAM  (p_out, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
+    UINT16_TO_BE_STREAM (p_out, p_attr->id);
+
+    /* the attribute is in the db record.
+     * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
+    switch(p_attr->type)
+    {
+    case TEXT_STR_DESC_TYPE:    /* 4 */
+    case DATA_ELE_SEQ_DESC_TYPE:/* 6 */
+    case DATA_ELE_ALT_DESC_TYPE:/* 7 */
+    case URL_DESC_TYPE:         /* 8 */
+#if (SDP_MAX_ATTR_LEN > 0xFFFF)
+        if(p_attr->len > 0xFFFF)
+        {
+            UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_LONG);
+            UINT32_TO_BE_STREAM (p_out, p_attr->len);
+        }
+        else
+
+#endif /* 0xFFFF - 0xFF */
+#if (SDP_MAX_ATTR_LEN > 0xFF)
+        if(p_attr->len > 0xFF)
+        {
+            UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_WORD);
+            UINT16_TO_BE_STREAM (p_out, p_attr->len);
+        }
+        else
+
+#endif /* 0xFF and less*/
+        {
+            UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
+            UINT8_TO_BE_STREAM (p_out, p_attr->len);
+        }
+
+        ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len);
+
+        return (p_out);
+    }
+
+    /* Now, store the attribute value */
+    switch (p_attr->len)
+    {
+    case 1:
+        UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_ONE_BYTE);
+        break;
+    case 2:
+        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_TWO_BYTES);
+        break;
+    case 4:
+        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_FOUR_BYTES);
+        break;
+    case 8:
+        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_EIGHT_BYTES);
+        break;
+    case 16:
+        UINT8_TO_BE_STREAM  (p_out, (p_attr->type << 3) | SIZE_SIXTEEN_BYTES);
+        break;
+    default:
+        UINT8_TO_BE_STREAM (p_out, (p_attr->type << 3) | SIZE_IN_NEXT_BYTE);
+        UINT8_TO_BE_STREAM (p_out, p_attr->len);
+        break;
+    }
+
+    ARRAY_TO_BE_STREAM (p_out, p_attr->value_ptr, (int)p_attr->len);
+
+    return (p_out);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_build_n_send_error
+**
+** Description      This function builds and sends an error packet.
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdpu_build_n_send_error (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 error_code, char *p_error_text)
+{
+    UINT8           *p_rsp, *p_rsp_start, *p_rsp_param_len;
+    UINT16          rsp_param_len;
+    BT_HDR          *p_buf;
+
+
+    SDP_TRACE_WARNING2 ("SDP - sdpu_build_n_send_error  code: 0x%x  CID: 0x%x",
+                        error_code, p_ccb->connection_id);
+
+    /* Get a buffer to use to build and send the packet to L2CAP */
+    if ((p_buf = (BT_HDR *)GKI_getpoolbuf (SDP_POOL_ID)) == NULL)
+    {
+        SDP_TRACE_ERROR0 ("SDP - no buf for err msg");
+        return;
+    }
+    p_buf->offset = L2CAP_MIN_OFFSET;
+    p_rsp = p_rsp_start = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+    UINT8_TO_BE_STREAM  (p_rsp, SDP_PDU_ERROR_RESPONSE);
+    UINT16_TO_BE_STREAM  (p_rsp, trans_num);
+
+    /* Skip the parameter length, we need to add it at the end */
+    p_rsp_param_len = p_rsp;
+    p_rsp += 2;
+
+    UINT16_TO_BE_STREAM  (p_rsp, error_code);
+
+    /* Unplugfest example traces do not have any error text */
+    if (p_error_text)
+        ARRAY_TO_BE_STREAM (p_rsp, p_error_text, (int) strlen (p_error_text));
+
+    /* Go back and put the parameter length into the buffer */
+    rsp_param_len = p_rsp - p_rsp_param_len - 2;
+    UINT16_TO_BE_STREAM (p_rsp_param_len, rsp_param_len);
+
+    /* Set the length of the SDP data in the buffer */
+    p_buf->len = p_rsp - p_rsp_start;
+
+
+    /* Send the buffer through L2CAP */
+    L2CA_DataWrite (p_ccb->connection_id, p_buf);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         sdpu_extract_uid_seq
+**
+** Description      This function extracts a UUID sequence from the passed input
+**                  buffer, and puts it into the passed output list.
+**
+** Returns          Pointer to next byte in the input buffer after the sequence.
+**
+*******************************************************************************/
+UINT8 *sdpu_extract_uid_seq (UINT8 *p, UINT16 param_len, tSDP_UUID_SEQ *p_seq)
+{
+    UINT8   *p_seq_end;
+    UINT8   descr, type, size;
+    UINT32  seq_len, uuid_len;
+
+    /* Assume none found */
+    p_seq->num_uids = 0;
+
+    /* A UID sequence is composed of a bunch of UIDs. */
+
+    BE_STREAM_TO_UINT8 (descr, p);
+    type = descr >> 3;
+    size = descr & 7;
+
+    if (type != DATA_ELE_SEQ_DESC_TYPE)
+        return (NULL);
+
+    switch (size)
+    {
+    case SIZE_TWO_BYTES:
+        seq_len = 2;
+        break;
+    case SIZE_FOUR_BYTES:
+        seq_len = 4;
+        break;
+    case SIZE_SIXTEEN_BYTES:
+        seq_len = 16;
+        break;
+    case SIZE_IN_NEXT_BYTE:
+        BE_STREAM_TO_UINT8 (seq_len, p);
+        break;
+    case SIZE_IN_NEXT_WORD:
+        BE_STREAM_TO_UINT16 (seq_len, p);
+        break;
+    case SIZE_IN_NEXT_LONG:
+        BE_STREAM_TO_UINT32 (seq_len, p);
+        break;
+    default:
+        return (NULL);
+    }
+
+    if (seq_len >= param_len)
+        return (NULL);
+
+    p_seq_end = p + seq_len;
+
+    /* Loop through, extracting the UIDs */
+    for ( ; p < p_seq_end ; )
+    {
+        BE_STREAM_TO_UINT8 (descr, p);
+        type = descr >> 3;
+        size = descr & 7;
+
+        if (type != UUID_DESC_TYPE)
+            return (NULL);
+
+        switch (size)
+        {
+        case SIZE_TWO_BYTES:
+            uuid_len = 2;
+            break;
+        case SIZE_FOUR_BYTES:
+            uuid_len = 4;
+            break;
+        case SIZE_SIXTEEN_BYTES:
+            uuid_len = 16;
+            break;
+        case SIZE_IN_NEXT_BYTE:
+            BE_STREAM_TO_UINT8 (uuid_len, p);
+            break;
+        case SIZE_IN_NEXT_WORD:
+            BE_STREAM_TO_UINT16 (uuid_len, p);
+            break;
+        case SIZE_IN_NEXT_LONG:
+            BE_STREAM_TO_UINT32 (uuid_len, p);
+            break;
+        default:
+            return (NULL);
+        }
+
+        /* If UUID length is valid, copy it across */
+        if ((uuid_len == 2) || (uuid_len == 4) || (uuid_len == 16))
+        {
+            p_seq->uuid_entry[p_seq->num_uids].len = (UINT16) uuid_len;
+            BE_STREAM_TO_ARRAY (p, p_seq->uuid_entry[p_seq->num_uids].value, (int)uuid_len);
+            p_seq->num_uids++;
+        }
+        else
+            return (NULL);
+
+        /* We can only do so many */
+        if (p_seq->num_uids >= MAX_UUIDS_PER_SEQ)
+            return (NULL);
+    }
+
+    if (p != p_seq_end)
+        return (NULL);
+
+    return (p);
+}
+
+
+
+/*******************************************************************************
+**
+** Function         sdpu_extract_attr_seq
+**
+** Description      This function extracts an attribute sequence from the passed
+**                  input buffer, and puts it into the passed output list.
+**
+** Returns          Pointer to next byte in the input buffer after the sequence.
+**
+*******************************************************************************/
+UINT8 *sdpu_extract_attr_seq (UINT8 *p, UINT16 param_len, tSDP_ATTR_SEQ *p_seq)
+{
+    UINT8   *p_end_list;
+    UINT8   descr, type, size;
+    UINT32  list_len, attr_len;
+
+    /* Assume none found */
+    p_seq->num_attr = 0;
+
+    /* Get attribute sequence info */
+    BE_STREAM_TO_UINT8 (descr, p);
+    type = descr >> 3;
+    size = descr & 7;
+
+    if (type != DATA_ELE_SEQ_DESC_TYPE)
+        return (p);
+
+    switch (size)
+    {
+    case SIZE_IN_NEXT_BYTE:
+        BE_STREAM_TO_UINT8 (list_len, p);
+        break;
+
+    case SIZE_IN_NEXT_WORD:
+        BE_STREAM_TO_UINT16 (list_len, p);
+        break;
+
+    case SIZE_IN_NEXT_LONG:
+        BE_STREAM_TO_UINT32 (list_len, p);
+        break;
+
+    default:
+        return (p);
+    }
+
+    if (list_len > param_len)
+        return (p);
+
+    p_end_list = p + list_len;
+
+    /* Loop through, extracting the attribute IDs */
+    for ( ; p < p_end_list ; )
+    {
+        BE_STREAM_TO_UINT8 (descr, p);
+        type = descr >> 3;
+        size = descr & 7;
+
+        if (type != UINT_DESC_TYPE)
+            return (p);
+
+        switch (size)
+        {
+        case SIZE_TWO_BYTES:
+            attr_len = 2;
+            break;
+        case SIZE_FOUR_BYTES:
+            attr_len = 4;
+            break;
+        case SIZE_IN_NEXT_BYTE:
+            BE_STREAM_TO_UINT8 (attr_len, p);
+            break;
+        case SIZE_IN_NEXT_WORD:
+            BE_STREAM_TO_UINT16 (attr_len, p);
+            break;
+        case SIZE_IN_NEXT_LONG:
+            BE_STREAM_TO_UINT32 (attr_len, p);
+            break;
+        default:
+            return (NULL);
+            break;
+        }
+
+        /* Attribute length must be 2-bytes or 4-bytes for a paired entry. */
+        if (attr_len == 2)
+        {
+            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p);
+            p_seq->attr_entry[p_seq->num_attr].end = p_seq->attr_entry[p_seq->num_attr].start;
+        }
+        else if (attr_len == 4)
+        {
+            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].start, p);
+            BE_STREAM_TO_UINT16 (p_seq->attr_entry[p_seq->num_attr].end, p);
+        }
+        else
+            return (NULL);
+
+        /* We can only do so many */
+        if (++p_seq->num_attr >= MAX_ATTR_PER_SEQ)
+            return (NULL);
+    }
+
+    return (p);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_get_len_from_type
+**
+** Description      This function gets the length
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT8 *sdpu_get_len_from_type (UINT8 *p, UINT8 type, UINT32 *p_len)
+{
+    UINT8   u8;
+    UINT16  u16;
+    UINT32  u32;
+
+    switch (type & 7)
+    {
+    case SIZE_ONE_BYTE:
+        *p_len = 1;
+        break;
+    case SIZE_TWO_BYTES:
+        *p_len = 2;
+        break;
+    case SIZE_FOUR_BYTES:
+        *p_len = 4;
+        break;
+    case SIZE_EIGHT_BYTES:
+        *p_len = 8;
+        break;
+    case SIZE_SIXTEEN_BYTES:
+        *p_len = 16;
+        break;
+    case SIZE_IN_NEXT_BYTE:
+        BE_STREAM_TO_UINT8 (u8, p);
+        *p_len = u8;
+        break;
+    case SIZE_IN_NEXT_WORD:
+        BE_STREAM_TO_UINT16 (u16, p);
+        *p_len = u16;
+        break;
+    case SIZE_IN_NEXT_LONG:
+        BE_STREAM_TO_UINT32 (u32, p);
+        *p_len = (UINT16) u32;
+        break;
+    }
+
+    return (p);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_is_base_uuid
+**
+** Description      This function checks a 128-bit UUID with the base to see if
+**                  it matches. Only the last 12 bytes are compared.
+**
+** Returns          TRUE if matched, else FALSE
+**
+*******************************************************************************/
+BOOLEAN sdpu_is_base_uuid (UINT8 *p_uuid)
+{
+    UINT16    xx;
+
+    for (xx = 4; xx < MAX_UUID_SIZE; xx++)
+        if (p_uuid[xx] != sdp_base_uuid[xx])
+            return (FALSE);
+
+    /* If here, matched */
+    return (TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_compare_uuid_arrays
+**
+** Description      This function compares 2 BE UUIDs. If needed, they are expanded
+**                  to 128-bit UUIDs, then compared.
+**
+** NOTE             it is assumed that the arrays are in Big Endian format
+**
+** Returns          TRUE if matched, else FALSE
+**
+*******************************************************************************/
+BOOLEAN sdpu_compare_uuid_arrays (UINT8 *p_uuid1, UINT32 len1, UINT8 *p_uuid2, UINT16 len2)
+{
+    UINT8       nu1[MAX_UUID_SIZE];
+    UINT8       nu2[MAX_UUID_SIZE];
+
+    /* If lengths match, do a straight compare */
+    if (len1 == len2)
+    {
+        if (len1 == 2)
+            return ((p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1]));
+        if (len1 == 4)
+            return (  (p_uuid1[0] == p_uuid2[0]) && (p_uuid1[1] == p_uuid2[1])
+                   && (p_uuid1[2] == p_uuid2[2]) && (p_uuid1[3] == p_uuid2[3]) );
+        else
+            return (memcmp (p_uuid1, p_uuid2, (size_t)len1) == 0);
+    }
+    else if (len1 > len2)
+    {
+        /* If the len1 was 4-byte, (so len2 is 2-byte), compare on the fly */
+        if (len1 == 4)
+        {
+            return ( (p_uuid1[0] == 0) && (p_uuid1[1] == 0)
+                  && (p_uuid1[2] == p_uuid2[0]) && (p_uuid1[3] == p_uuid2[1]) );
+        }
+        else
+        {
+            /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
+            memcpy (nu1, p_uuid1,       MAX_UUID_SIZE);
+            memcpy (nu2, sdp_base_uuid, MAX_UUID_SIZE);
+
+            if (len2 == 4)
+                memcpy (nu2, p_uuid2, len2);
+            else
+                memcpy (nu2 + 2, p_uuid2, len2);
+
+            return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0);
+        }
+    }
+    else
+    {
+        /* len2 is greater than len1 */
+        /* If the len2 was 4-byte, (so len1 is 2-byte), compare on the fly */
+        if (len2 == 4)
+        {
+            return ( (p_uuid2[0] == 0) && (p_uuid2[1] == 0)
+                  && (p_uuid2[2] == p_uuid1[0]) && (p_uuid2[3] == p_uuid1[1]) );
+        }
+        else
+        {
+            /* Normalize UUIDs to 16-byte form, then compare. Len1 must be 16 */
+            memcpy (nu2, p_uuid2,       MAX_UUID_SIZE);
+            memcpy (nu1, sdp_base_uuid, MAX_UUID_SIZE);
+
+            if (len1 == 4)
+                memcpy (nu1, p_uuid1, (size_t)len1);
+            else
+                memcpy (nu1 + 2, p_uuid1, (size_t)len1);
+
+            return (memcmp (nu1, nu2, MAX_UUID_SIZE) == 0);
+        }
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_compare_bt_uuids
+**
+** Description      This function compares 2 BT UUID structures.
+**
+** NOTE             it is assumed that BT UUID structures are compressed to the
+**                  smallest possible UUIDs (by removing the base SDP UUID)
+**
+** Returns          TRUE if matched, else FALSE
+**
+*******************************************************************************/
+BOOLEAN sdpu_compare_bt_uuids (tBT_UUID *p_uuid1, tBT_UUID *p_uuid2)
+{
+    /* Lengths must match for BT UUIDs to match */
+    if (p_uuid1->len == p_uuid2->len)
+    {
+        if (p_uuid1->len == 2)
+            return (p_uuid1->uu.uuid16 == p_uuid2->uu.uuid16);
+        else if (p_uuid1->len == 4)
+            return (p_uuid1->uu.uuid32 == p_uuid2->uu.uuid32);
+        else if (!memcmp (p_uuid1->uu.uuid128, p_uuid2->uu.uuid128, 16))
+            return (TRUE);
+    }
+
+    return (FALSE);
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_compare_uuid_with_attr
+**
+** Description      This function compares a BT UUID structure with the UUID in an
+**                  SDP attribute record. If needed, they are expanded to 128-bit
+**                  UUIDs, then compared.
+**
+** NOTE           - it is assumed that BT UUID structures are compressed to the
+**                  smallest possible UUIDs (by removing the base SDP UUID).
+**                - it is also assumed that the discovery atribute is compressed
+**                  to the smallest possible
+**
+** Returns          TRUE if matched, else FALSE
+**
+*******************************************************************************/
+BOOLEAN sdpu_compare_uuid_with_attr (tBT_UUID *p_btuuid, tSDP_DISC_ATTR *p_attr)
+{
+    UINT16      attr_len = SDP_DISC_ATTR_LEN (p_attr->attr_len_type);
+
+    /* Since both UUIDs are compressed, lengths must match  */
+    if (p_btuuid->len != attr_len)
+        return (FALSE);
+
+    if (p_btuuid->len == 2)
+        return (BOOLEAN)(p_btuuid->uu.uuid16 == p_attr->attr_value.v.u16);
+    else if (p_btuuid->len == 4)
+        return (BOOLEAN)(p_btuuid->uu.uuid32 == p_attr->attr_value.v.u32);
+    /* coverity[overrun-buffer-arg] */
+    /*
+       Event overrun-buffer-arg: Overrun of static array "&p_attr->attr_value.v.array" of size 4 bytes by passing it to a function which indexes it with argument "16U" at byte position 15
+       FALSE-POSITIVE error from Coverity test tool. Please do NOT remove following comment.
+       False-positive: SDP uses scratch buffer to hold the attribute value.
+       The actual size of tSDP_DISC_ATVAL does not matter.
+       If the array size in tSDP_DISC_ATVAL is increase, we would increase the system RAM usage unnecessarily
+    */
+    else if (!memcmp (p_btuuid->uu.uuid128, p_attr->attr_value.v.array, MAX_UUID_SIZE))
+        return (TRUE);
+
+    return (FALSE);
+}
+
+/*******************************************************************************
+**
+** Function         sdpu_sort_attr_list
+**
+** Description      sorts a list of attributes in numeric order from lowest to
+**                  highest to conform to SDP specification
+**
+** Returns          void
+**
+*******************************************************************************/
+void sdpu_sort_attr_list( UINT16 num_attr, tSDP_DISCOVERY_DB *p_db )
+{
+    UINT16 i;
+    UINT16 x;
+
+    /* Done if no attributes to sort */
+    if (num_attr <= 1)
+    {
+        return;
+    }
+    else if (num_attr > SDP_MAX_ATTR_FILTERS)
+    {
+        num_attr = SDP_MAX_ATTR_FILTERS;
+    }
+
+    num_attr--; /* for the for-loop */
+    for( i = 0; i < num_attr; )
+    {
+        if( p_db->attr_filters[i] > p_db->attr_filters[i+1] )
+        {
+            /* swap the attribute IDs and start from the beginning */
+            x = p_db->attr_filters[i];
+            p_db->attr_filters[i] = p_db->attr_filters[i+1];
+            p_db->attr_filters[i+1] = x;
+
+            i = 0;
+        }
+        else
+            i++;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_get_list_len
+**
+** Description      gets the total list length in the sdp database for a given
+**                  uid sequence and attr sequence
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT16 sdpu_get_list_len(tSDP_UUID_SEQ *uid_seq, tSDP_ATTR_SEQ *attr_seq)
+{
+    tSDP_RECORD    *p_rec;
+    UINT16 len = 0;
+    UINT16 len1;
+
+    for (p_rec = sdp_db_service_search (NULL, uid_seq); p_rec; p_rec = sdp_db_service_search (p_rec, uid_seq))
+    {
+        len += 3;
+
+        len1 = sdpu_get_attrib_seq_len(p_rec, attr_seq );
+
+        if (len1 != 0)
+            len += len1;
+        else
+            len -= 3;
+    }
+    return len;
+}
+
+/*******************************************************************************
+**
+** Function         sdpu_get_attrib_seq_len
+**
+** Description      gets the length of the specific attributes in a given
+**                  sdp record
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT16 sdpu_get_attrib_seq_len(tSDP_RECORD *p_rec, tSDP_ATTR_SEQ *attr_seq)
+{
+    tSDP_ATTRIBUTE *p_attr;
+    UINT16 len1 = 0;
+    UINT16 xx;
+    BOOLEAN is_range = FALSE;
+    UINT16 start_id, end_id;
+
+    for (xx = 0; xx < attr_seq->num_attr; xx++)
+    {
+        if (is_range == FALSE)
+        {
+            start_id = attr_seq->attr_entry[xx].start;
+            end_id = attr_seq->attr_entry[xx].end;
+        }
+        p_attr = sdp_db_find_attr_in_rec (p_rec,
+                                          start_id,
+                                          end_id);
+        if (p_attr)
+        {
+            len1 += sdpu_get_attrib_entry_len (p_attr);
+
+            /* If doing a range, stick with this one till no more attributes found */
+            if (start_id != end_id)
+            {
+                /* Update for next time through */
+                start_id = p_attr->id + 1;
+                xx--;
+                is_range = TRUE;
+            }
+            else
+                is_range = FALSE;
+        }
+        else
+            is_range = FALSE;
+    }
+    return len1;
+}
+
+/*******************************************************************************
+**
+** Function         sdpu_get_attrib_entry_len
+**
+** Description      gets the length of a specific attribute
+**
+** Returns          void
+**
+*******************************************************************************/
+UINT16 sdpu_get_attrib_entry_len(tSDP_ATTRIBUTE *p_attr)
+{
+    UINT16 len = 3;
+
+    /* the attribute is in the db record.
+     * assuming the attribute len is less than SDP_MAX_ATTR_LEN */
+    switch(p_attr->type)
+    {
+    case TEXT_STR_DESC_TYPE:    /* 4 */
+    case DATA_ELE_SEQ_DESC_TYPE:/* 6 */
+    case DATA_ELE_ALT_DESC_TYPE:/* 7 */
+    case URL_DESC_TYPE:         /* 8 */
+#if (SDP_MAX_ATTR_LEN > 0xFFFF)
+        if(p_attr->len > 0xFFFF)
+        {
+            len += 5;
+        }
+        else
+
+#endif/* 0xFFFF - 0xFF */
+#if (SDP_MAX_ATTR_LEN > 0xFF)
+        if(p_attr->len > 0xFF)
+        {
+            len += 3;
+        }
+        else
+
+#endif /* 0xFF and less*/
+        {
+            len += 2;
+        }
+        len += p_attr->len;
+        return len;
+	}
+
+    /* Now, the attribute value */
+    switch (p_attr->len)
+    {
+    case 1:
+    case 2:
+    case 4:
+    case 8:
+    case 16:
+        len += 1;
+        break;
+    default:
+        len += 2;
+        break;
+    }
+
+    len += p_attr->len;
+    return len;
+}
+
+
+/*******************************************************************************
+**
+** Function         sdpu_build_partial_attrib_entry
+**
+** Description      This function fills a buffer with partial attribute. It is
+**                  assumed that the maximum size of any attribute is 256 bytes.
+**
+**                  p_out: output buffer
+**                  p_attr: attribute to be copied partially into p_out
+**                  rem_len: num bytes to copy into p_out
+**                  offset: current start offset within the attr that needs to be copied
+**
+** Returns          Pointer to next byte in the output buffer.
+**                  offset is also updated
+**
+*******************************************************************************/
+UINT8 *sdpu_build_partial_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr, UINT16 len, UINT16 *offset)
+{
+    UINT8   tmp_attr[MAX_ATTR_LEN];
+    UINT8   *p_tmp_attr = &tmp_attr[0];
+    size_t  len_to_copy;
+    UINT16  attr_len;
+
+    sdpu_build_attrib_entry(p_tmp_attr, p_attr);
+    attr_len = sdpu_get_attrib_entry_len(p_attr);
+
+    len_to_copy = ((attr_len - *offset) < len) ? (attr_len - *offset): len;
+
+    memcpy(p_out, &tmp_attr[*offset], len_to_copy);
+
+    p_out = &p_out[len_to_copy];
+    *offset += len_to_copy;
+
+    return p_out;
+}
+
+/*******************************************************************************
+**
+** Function         sdpu_uuid16_to_uuid128
+**
+** Description      This function converts UUID-16 to UUID-128 by including the base UUID
+**
+**                  uuid16: 2-byte UUID
+**                  p_uuid128: Expanded 128-bit UUID
+**
+** Returns          None
+**
+*******************************************************************************/
+void sdpu_uuid16_to_uuid128(UINT16 uuid16, UINT8* p_uuid128)
+{
+    UINT16 uuid16_bo;
+    memset(p_uuid128, 0, 16);
+
+    memcpy(p_uuid128, sdp_base_uuid, MAX_UUID_SIZE);
+    uuid16_bo = ntohs(uuid16);
+    memcpy(p_uuid128+ 2, &uuid16_bo, sizeof(uint16_t));
+}
diff --git a/stack/sdp/sdpint.h b/stack/sdp/sdpint.h
new file mode 100644
index 0000000..b300664
--- /dev/null
+++ b/stack/sdp/sdpint.h
@@ -0,0 +1,329 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains internally used SDP definitions
+ *
+ ******************************************************************************/
+
+#ifndef  SDP_INT_H
+#define  SDP_INT_H
+
+#include "bt_target.h"
+#include "sdp_api.h"
+#include "l2c_api.h"
+
+
+/* Continuation length - we use a 2-byte offset */
+#define SDP_CONTINUATION_LEN        2
+#define SDP_MAX_CONTINUATION_LEN    16          /* As per the spec */
+
+/* Timeout definitions. */
+#define SDP_INACT_TIMEOUT       30              /* Inactivity timeout         */
+
+
+/* Define the Out-Flow default values. */
+#define  SDP_OFLOW_QOS_FLAG                 0
+#define  SDP_OFLOW_SERV_TYPE                0
+#define  SDP_OFLOW_TOKEN_RATE               0
+#define  SDP_OFLOW_TOKEN_BUCKET_SIZE        0
+#define  SDP_OFLOW_PEAK_BANDWIDTH           0
+#define  SDP_OFLOW_LATENCY                  0
+#define  SDP_OFLOW_DELAY_VARIATION          0
+
+/* Define the In-Flow default values. */
+#define  SDP_IFLOW_QOS_FLAG                 0
+#define  SDP_IFLOW_SERV_TYPE                0
+#define  SDP_IFLOW_TOKEN_RATE               0
+#define  SDP_IFLOW_TOKEN_BUCKET_SIZE        0
+#define  SDP_IFLOW_PEAK_BANDWIDTH           0
+#define  SDP_IFLOW_LATENCY                  0
+#define  SDP_IFLOW_DELAY_VARIATION          0
+
+#define  SDP_LINK_TO                        0
+
+/* Define the type of device notification. */
+/* (Inquiry Scan and Page Scan)            */
+#define  SDP_DEVICE_NOTI_LEN                sizeof (BT_HDR) +           \
+                                            HCIC_PREAMBLE_SIZE +        \
+                                            HCIC_PARAM_SIZE_WRITE_PARAM1
+
+#define  SDP_DEVICE_NOTI_FLAG               0x03
+
+/* Define the Protocol Data Unit (PDU) types.
+*/
+#define  SDP_PDU_ERROR_RESPONSE                 0x01
+#define  SDP_PDU_SERVICE_SEARCH_REQ             0x02
+#define  SDP_PDU_SERVICE_SEARCH_RSP             0x03
+#define  SDP_PDU_SERVICE_ATTR_REQ               0x04
+#define  SDP_PDU_SERVICE_ATTR_RSP               0x05
+#define  SDP_PDU_SERVICE_SEARCH_ATTR_REQ        0x06
+#define  SDP_PDU_SERVICE_SEARCH_ATTR_RSP        0x07
+
+/* Max UUIDs and attributes we support per sequence */
+#define     MAX_UUIDS_PER_SEQ       16
+#define     MAX_ATTR_PER_SEQ        16
+
+/* Max length we support for any attribute */
+// btla-specific ++
+#ifdef SDP_MAX_ATTR_LEN
+#define MAX_ATTR_LEN SDP_MAX_ATTR_LEN
+#else
+#define     MAX_ATTR_LEN            256
+#endif
+// btla-specific --
+
+/* Internal UUID sequence representation */
+typedef struct
+{
+    UINT16     len;
+    UINT8      value[MAX_UUID_SIZE];
+} tUID_ENT;
+
+typedef struct
+{
+    UINT16      num_uids;
+    tUID_ENT    uuid_entry[MAX_UUIDS_PER_SEQ];
+} tSDP_UUID_SEQ;
+
+
+/* Internal attribute sequence definitions */
+typedef struct
+{
+    UINT16      start;
+    UINT16      end;
+} tATT_ENT;
+
+typedef struct
+{
+    UINT16      num_attr;
+    tATT_ENT    attr_entry[MAX_ATTR_PER_SEQ];
+} tSDP_ATTR_SEQ;
+
+
+/* Define the attribute element of the SDP database record */
+typedef struct
+{
+    UINT32  len;           /* Number of bytes in the entry */
+    UINT8   *value_ptr;    /* Points to attr_pad */
+    UINT16  id;
+    UINT8   type;
+} tSDP_ATTRIBUTE;
+
+/* An SDP record consists of a handle, and 1 or more attributes */
+typedef struct
+{
+    UINT32              record_handle;
+    UINT32              free_pad_ptr;
+    UINT16              num_attributes;
+    tSDP_ATTRIBUTE      attribute[SDP_MAX_REC_ATTR];
+    UINT8               attr_pad[SDP_MAX_PAD_LEN];
+} tSDP_RECORD;
+
+
+/* Define the SDP database */
+typedef struct
+{
+    UINT32         di_primary_handle;       /* Device ID Primary record or NULL if nonexistent */
+    BOOLEAN        brcm_di_registered;
+    UINT16         num_records;
+    tSDP_RECORD    record[SDP_MAX_RECORDS];
+} tSDP_DB;
+
+enum
+{
+    SDP_IS_SEARCH,
+    SDP_IS_ATTR_SEARCH,
+    SDP_IS_PASS_THRU    /* only when SDP_FOR_JV_INCLUDED == TRUE */
+};
+
+#if SDP_SERVER_ENABLED == TRUE
+/* Continuation information for the SDP server response */
+typedef struct
+{
+    UINT16            next_attr_index; /* attr index for next continuation response */
+    UINT16            next_attr_start_id;  /* attr id to start with for the attr index in next cont. response */
+    tSDP_RECORD       *prev_sdp_rec; /* last sdp record that was completely sent in the response */
+    BOOLEAN           last_attr_seq_desc_sent; /* whether attr seq length has been sent previously */
+    UINT16            attr_offset; /* offset within the attr to keep trak of partial attributes in the responses */
+} tSDP_CONT_INFO;
+#endif  /* SDP_SERVER_ENABLED == TRUE */
+
+/* Define the SDP Connection Control Block */
+typedef struct
+{
+#define SDP_STATE_IDLE              0
+#define SDP_STATE_CONN_SETUP        1
+#define SDP_STATE_CFG_SETUP         2
+#define SDP_STATE_CONNECTED         3
+    UINT8             con_state;
+
+#define SDP_FLAGS_IS_ORIG           0x01
+#define SDP_FLAGS_HIS_CFG_DONE      0x02
+#define SDP_FLAGS_MY_CFG_DONE       0x04
+    UINT8             con_flags;
+
+    BD_ADDR           device_address;
+    TIMER_LIST_ENT    timer_entry;
+    UINT16            rem_mtu_size;
+    UINT16            connection_id;
+    UINT16            list_len;                 /* length of the response in the GKI buffer */
+    UINT8             *rsp_list;                /* pointer to GKI buffer holding response */
+
+#if SDP_CLIENT_ENABLED == TRUE
+    tSDP_DISCOVERY_DB *p_db;                    /* Database to save info into   */
+    tSDP_DISC_CMPL_CB *p_cb;                    /* Callback for discovery done  */
+    tSDP_DISC_CMPL_CB2 *p_cb2;                   /* Callback for discovery done piggy back with the user data */
+    void               *user_data;              /* piggy back user data */
+    UINT32            handles[SDP_MAX_DISC_SERVER_RECS]; /* Discovered server record handles */
+    UINT16            num_handles;              /* Number of server handles     */
+    UINT16            cur_handle;               /* Current handle being processed */
+    UINT16            transaction_id;
+    UINT16            disconnect_reason;        /* Disconnect reason            */
+#if (defined(SDP_BROWSE_PLUS) && SDP_BROWSE_PLUS == TRUE)
+    UINT16            cur_uuid_idx;
+#endif
+
+#define SDP_DISC_WAIT_CONN          0
+#define SDP_DISC_WAIT_HANDLES       1
+#define SDP_DISC_WAIT_ATTR          2
+#define SDP_DISC_WAIT_SEARCH_ATTR   3
+#define SDP_DISC_WAIT_PASS_THRU     4    /* only when SDP_FOR_JV_INCLUDED == TRUE */
+#define SDP_DISC_WAIT_CANCEL        5
+
+    UINT8             disc_state;
+    UINT8             is_attr_search;
+#endif  /* SDP_CLIENT_ENABLED == TRUE */
+
+#if SDP_SERVER_ENABLED == TRUE
+    UINT16            cont_offset;              /* Continuation state data in the server response */
+    tSDP_CONT_INFO    cont_info;                /* structure to hold continuation information for the server response */
+#endif  /* SDP_SERVER_ENABLED == TRUE */
+
+} tCONN_CB;
+
+
+/*  The main SDP control block */
+typedef struct
+{
+    tL2CAP_CFG_INFO   l2cap_my_cfg;             /* My L2CAP config     */
+    tCONN_CB          ccb[SDP_MAX_CONNECTIONS];
+#if SDP_SERVER_ENABLED == TRUE
+    tSDP_DB           server_db;
+#endif
+    tL2CAP_APPL_INFO  reg_info;                 /* L2CAP Registration info */
+    UINT16            max_attr_list_size;       /* Max attribute list size to use   */
+    UINT16            max_recs_per_search;      /* Max records we want per seaarch  */
+    UINT8             trace_level;
+} tSDP_CB;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+/* Global SDP data */
+#if SDP_DYNAMIC_MEMORY == FALSE
+SDP_API extern tSDP_CB  sdp_cb;
+#else
+SDP_API extern tSDP_CB *sdp_cb_ptr;
+#define sdp_cb (*sdp_cb_ptr)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Functions provided by sdp_main.c */
+SDP_API extern void     sdp_init (void);
+extern void     sdp_disconnect (tCONN_CB*p_ccb, UINT16 reason);
+
+#if (defined(SDP_DEBUG) && SDP_DEBUG == TRUE)
+SDP_API extern UINT16 sdp_set_max_attr_list_size (UINT16 max_size);
+#endif
+
+/* Functions provided by sdp_conn.c
+*/
+extern void sdp_conn_rcv_l2e_conn_ind (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_conn_cfm (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_disc (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_config_ind (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_config_cfm (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_conn_failed (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_connected (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_conn_failed (BT_HDR *p_msg);
+extern void sdp_conn_rcv_l2e_data (BT_HDR *p_msg);
+extern void sdp_conn_timeout (tCONN_CB *p_ccb);
+
+extern tCONN_CB *sdp_conn_originate (UINT8 *p_bd_addr);
+
+/* Functions provided by sdp_utils.c
+*/
+extern tCONN_CB *sdpu_find_ccb_by_cid (UINT16 cid);
+extern tCONN_CB *sdpu_find_ccb_by_db (tSDP_DISCOVERY_DB *p_db);
+extern tCONN_CB *sdpu_allocate_ccb (void);
+extern void      sdpu_release_ccb (tCONN_CB *p_ccb);
+
+extern UINT8    *sdpu_build_attrib_seq (UINT8 *p_out, UINT16 *p_attr, UINT16 num_attrs);
+extern UINT8    *sdpu_build_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr);
+extern void      sdpu_build_n_send_error (tCONN_CB *p_ccb, UINT16 trans_num, UINT16 error_code, char *p_error_text);
+
+extern UINT8    *sdpu_extract_attr_seq (UINT8 *p, UINT16 param_len, tSDP_ATTR_SEQ *p_seq);
+extern UINT8    *sdpu_extract_uid_seq (UINT8 *p, UINT16 param_len, tSDP_UUID_SEQ *p_seq);
+
+SDP_API extern UINT8    *sdpu_get_len_from_type (UINT8 *p, UINT8 type, UINT32 *p_len);
+extern BOOLEAN  sdpu_is_base_uuid (UINT8 *p_uuid);
+extern BOOLEAN  sdpu_compare_uuid_arrays (UINT8 *p_uuid1, UINT32 len1, UINT8 *p_uuid2, UINT16 len2);
+SDP_API extern BOOLEAN  sdpu_compare_bt_uuids (tBT_UUID *p_uuid1, tBT_UUID *p_uuid2);
+extern BOOLEAN  sdpu_compare_uuid_with_attr (tBT_UUID *p_btuuid, tSDP_DISC_ATTR *p_attr);
+
+extern void     sdpu_sort_attr_list( UINT16 num_attr, tSDP_DISCOVERY_DB *p_db );
+extern UINT16 sdpu_get_list_len( tSDP_UUID_SEQ   *uid_seq, tSDP_ATTR_SEQ   *attr_seq );
+extern UINT16 sdpu_get_attrib_seq_len(tSDP_RECORD *p_rec, tSDP_ATTR_SEQ *attr_seq);
+extern UINT16 sdpu_get_attrib_entry_len(tSDP_ATTRIBUTE *p_attr);
+extern UINT8 *sdpu_build_partial_attrib_entry (UINT8 *p_out, tSDP_ATTRIBUTE *p_attr, UINT16 len, UINT16 *offset);
+extern void sdpu_uuid16_to_uuid128(UINT16 uuid16, UINT8* p_uuid128);
+
+/* Functions provided by sdp_db.c
+*/
+extern tSDP_RECORD    *sdp_db_service_search (tSDP_RECORD *p_rec, tSDP_UUID_SEQ *p_seq);
+extern tSDP_RECORD    *sdp_db_find_record (UINT32 handle);
+extern tSDP_ATTRIBUTE *sdp_db_find_attr_in_rec (tSDP_RECORD *p_rec, UINT16 start_attr, UINT16 end_attr);
+
+
+/* Functions provided by sdp_server.c
+*/
+#if SDP_SERVER_ENABLED == TRUE
+extern void     sdp_server_handle_client_req (tCONN_CB *p_ccb, BT_HDR *p_msg);
+#else
+#define sdp_server_handle_client_req(p_ccb, p_msg)
+#endif
+
+/* Functions provided by sdp_discovery.c
+*/
+#if SDP_CLIENT_ENABLED == TRUE
+extern void sdp_disc_connected (tCONN_CB *p_ccb);
+extern void sdp_disc_server_rsp (tCONN_CB *p_ccb, BT_HDR *p_msg);
+#else
+#define sdp_disc_connected(p_ccb)
+#define sdp_disc_server_rsp(p_ccb, p_msg)
+#endif
+
+
+
+#endif
+
diff --git a/stack/smp/aes.c b/stack/smp/aes.c
new file mode 100644
index 0000000..1028d5b
--- /dev/null
+++ b/stack/smp/aes.c
@@ -0,0 +1,926 @@
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved.
+
+ LICENSE TERMS
+
+ The redistribution and use of this software (with or without changes)
+ is allowed without the payment of fees or royalties provided that:
+
+  1. source code distributions include the above copyright notice, this
+     list of conditions and the following disclaimer;
+
+  2. binary distributions include the above copyright notice, this list
+     of conditions and the following disclaimer in their documentation;
+
+  3. the name of the copyright holder is not used to endorse products
+     built using this software without specific written permission.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue 09/09/2006
+
+ This is an AES implementation that uses only 8-bit byte operations on the
+ cipher state (there are options to use 32-bit types if available).
+
+ The combination of mix columns and byte substitution used here is based on
+ that developed by Karl Malbrain. His contribution is acknowledged.
+ */
+
+/* define if you have a fast memcpy function on your system */
+#if 1
+#  define HAVE_MEMCPY
+#  include <string.h>
+#if 0
+#  if defined( _MSC_VER )
+#    include <intrin.h>
+#    pragma intrinsic( memcpy )
+#  endif
+#endif
+#endif
+
+#include <stdlib.h>
+
+/* define if you have fast 32-bit types on your system */
+#if 1
+#  define HAVE_UINT_32T
+#endif
+
+/* define if you don't want any tables */
+#if 1
+#  define USE_TABLES
+#endif
+
+/*  On Intel Core 2 duo VERSION_1 is faster */
+
+/* alternative versions (test for performance on your system) */
+#if 1
+#  define VERSION_1
+#endif
+
+#include "aes.h"
+
+#if defined( HAVE_UINT_32T )
+  typedef unsigned long uint_32t;
+#endif
+
+/* functions for finite field multiplication in the AES Galois field    */
+
+#define WPOLY   0x011b
+#define BPOLY     0x1b
+#define DPOLY   0x008d
+
+#define f1(x)   (x)
+#define f2(x)   ((x << 1) ^ (((x >> 7) & 1) * WPOLY))
+#define f4(x)   ((x << 2) ^ (((x >> 6) & 1) * WPOLY) ^ (((x >> 6) & 2) * WPOLY))
+#define f8(x)   ((x << 3) ^ (((x >> 5) & 1) * WPOLY) ^ (((x >> 5) & 2) * WPOLY) \
+                          ^ (((x >> 5) & 4) * WPOLY))
+#define d2(x)   (((x) >> 1) ^ ((x) & 1 ? DPOLY : 0))
+
+#define f3(x)   (f2(x) ^ x)
+#define f9(x)   (f8(x) ^ x)
+#define fb(x)   (f8(x) ^ f2(x) ^ x)
+#define fd(x)   (f8(x) ^ f4(x) ^ x)
+#define fe(x)   (f8(x) ^ f4(x) ^ f2(x))
+
+#if defined( USE_TABLES )
+
+#define sb_data(w) {    /* S Box data values */                            \
+    w(0x63), w(0x7c), w(0x77), w(0x7b), w(0xf2), w(0x6b), w(0x6f), w(0xc5),\
+    w(0x30), w(0x01), w(0x67), w(0x2b), w(0xfe), w(0xd7), w(0xab), w(0x76),\
+    w(0xca), w(0x82), w(0xc9), w(0x7d), w(0xfa), w(0x59), w(0x47), w(0xf0),\
+    w(0xad), w(0xd4), w(0xa2), w(0xaf), w(0x9c), w(0xa4), w(0x72), w(0xc0),\
+    w(0xb7), w(0xfd), w(0x93), w(0x26), w(0x36), w(0x3f), w(0xf7), w(0xcc),\
+    w(0x34), w(0xa5), w(0xe5), w(0xf1), w(0x71), w(0xd8), w(0x31), w(0x15),\
+    w(0x04), w(0xc7), w(0x23), w(0xc3), w(0x18), w(0x96), w(0x05), w(0x9a),\
+    w(0x07), w(0x12), w(0x80), w(0xe2), w(0xeb), w(0x27), w(0xb2), w(0x75),\
+    w(0x09), w(0x83), w(0x2c), w(0x1a), w(0x1b), w(0x6e), w(0x5a), w(0xa0),\
+    w(0x52), w(0x3b), w(0xd6), w(0xb3), w(0x29), w(0xe3), w(0x2f), w(0x84),\
+    w(0x53), w(0xd1), w(0x00), w(0xed), w(0x20), w(0xfc), w(0xb1), w(0x5b),\
+    w(0x6a), w(0xcb), w(0xbe), w(0x39), w(0x4a), w(0x4c), w(0x58), w(0xcf),\
+    w(0xd0), w(0xef), w(0xaa), w(0xfb), w(0x43), w(0x4d), w(0x33), w(0x85),\
+    w(0x45), w(0xf9), w(0x02), w(0x7f), w(0x50), w(0x3c), w(0x9f), w(0xa8),\
+    w(0x51), w(0xa3), w(0x40), w(0x8f), w(0x92), w(0x9d), w(0x38), w(0xf5),\
+    w(0xbc), w(0xb6), w(0xda), w(0x21), w(0x10), w(0xff), w(0xf3), w(0xd2),\
+    w(0xcd), w(0x0c), w(0x13), w(0xec), w(0x5f), w(0x97), w(0x44), w(0x17),\
+    w(0xc4), w(0xa7), w(0x7e), w(0x3d), w(0x64), w(0x5d), w(0x19), w(0x73),\
+    w(0x60), w(0x81), w(0x4f), w(0xdc), w(0x22), w(0x2a), w(0x90), w(0x88),\
+    w(0x46), w(0xee), w(0xb8), w(0x14), w(0xde), w(0x5e), w(0x0b), w(0xdb),\
+    w(0xe0), w(0x32), w(0x3a), w(0x0a), w(0x49), w(0x06), w(0x24), w(0x5c),\
+    w(0xc2), w(0xd3), w(0xac), w(0x62), w(0x91), w(0x95), w(0xe4), w(0x79),\
+    w(0xe7), w(0xc8), w(0x37), w(0x6d), w(0x8d), w(0xd5), w(0x4e), w(0xa9),\
+    w(0x6c), w(0x56), w(0xf4), w(0xea), w(0x65), w(0x7a), w(0xae), w(0x08),\
+    w(0xba), w(0x78), w(0x25), w(0x2e), w(0x1c), w(0xa6), w(0xb4), w(0xc6),\
+    w(0xe8), w(0xdd), w(0x74), w(0x1f), w(0x4b), w(0xbd), w(0x8b), w(0x8a),\
+    w(0x70), w(0x3e), w(0xb5), w(0x66), w(0x48), w(0x03), w(0xf6), w(0x0e),\
+    w(0x61), w(0x35), w(0x57), w(0xb9), w(0x86), w(0xc1), w(0x1d), w(0x9e),\
+    w(0xe1), w(0xf8), w(0x98), w(0x11), w(0x69), w(0xd9), w(0x8e), w(0x94),\
+    w(0x9b), w(0x1e), w(0x87), w(0xe9), w(0xce), w(0x55), w(0x28), w(0xdf),\
+    w(0x8c), w(0xa1), w(0x89), w(0x0d), w(0xbf), w(0xe6), w(0x42), w(0x68),\
+    w(0x41), w(0x99), w(0x2d), w(0x0f), w(0xb0), w(0x54), w(0xbb), w(0x16) }
+
+#define isb_data(w) {   /* inverse S Box data values */                    \
+    w(0x52), w(0x09), w(0x6a), w(0xd5), w(0x30), w(0x36), w(0xa5), w(0x38),\
+    w(0xbf), w(0x40), w(0xa3), w(0x9e), w(0x81), w(0xf3), w(0xd7), w(0xfb),\
+    w(0x7c), w(0xe3), w(0x39), w(0x82), w(0x9b), w(0x2f), w(0xff), w(0x87),\
+    w(0x34), w(0x8e), w(0x43), w(0x44), w(0xc4), w(0xde), w(0xe9), w(0xcb),\
+    w(0x54), w(0x7b), w(0x94), w(0x32), w(0xa6), w(0xc2), w(0x23), w(0x3d),\
+    w(0xee), w(0x4c), w(0x95), w(0x0b), w(0x42), w(0xfa), w(0xc3), w(0x4e),\
+    w(0x08), w(0x2e), w(0xa1), w(0x66), w(0x28), w(0xd9), w(0x24), w(0xb2),\
+    w(0x76), w(0x5b), w(0xa2), w(0x49), w(0x6d), w(0x8b), w(0xd1), w(0x25),\
+    w(0x72), w(0xf8), w(0xf6), w(0x64), w(0x86), w(0x68), w(0x98), w(0x16),\
+    w(0xd4), w(0xa4), w(0x5c), w(0xcc), w(0x5d), w(0x65), w(0xb6), w(0x92),\
+    w(0x6c), w(0x70), w(0x48), w(0x50), w(0xfd), w(0xed), w(0xb9), w(0xda),\
+    w(0x5e), w(0x15), w(0x46), w(0x57), w(0xa7), w(0x8d), w(0x9d), w(0x84),\
+    w(0x90), w(0xd8), w(0xab), w(0x00), w(0x8c), w(0xbc), w(0xd3), w(0x0a),\
+    w(0xf7), w(0xe4), w(0x58), w(0x05), w(0xb8), w(0xb3), w(0x45), w(0x06),\
+    w(0xd0), w(0x2c), w(0x1e), w(0x8f), w(0xca), w(0x3f), w(0x0f), w(0x02),\
+    w(0xc1), w(0xaf), w(0xbd), w(0x03), w(0x01), w(0x13), w(0x8a), w(0x6b),\
+    w(0x3a), w(0x91), w(0x11), w(0x41), w(0x4f), w(0x67), w(0xdc), w(0xea),\
+    w(0x97), w(0xf2), w(0xcf), w(0xce), w(0xf0), w(0xb4), w(0xe6), w(0x73),\
+    w(0x96), w(0xac), w(0x74), w(0x22), w(0xe7), w(0xad), w(0x35), w(0x85),\
+    w(0xe2), w(0xf9), w(0x37), w(0xe8), w(0x1c), w(0x75), w(0xdf), w(0x6e),\
+    w(0x47), w(0xf1), w(0x1a), w(0x71), w(0x1d), w(0x29), w(0xc5), w(0x89),\
+    w(0x6f), w(0xb7), w(0x62), w(0x0e), w(0xaa), w(0x18), w(0xbe), w(0x1b),\
+    w(0xfc), w(0x56), w(0x3e), w(0x4b), w(0xc6), w(0xd2), w(0x79), w(0x20),\
+    w(0x9a), w(0xdb), w(0xc0), w(0xfe), w(0x78), w(0xcd), w(0x5a), w(0xf4),\
+    w(0x1f), w(0xdd), w(0xa8), w(0x33), w(0x88), w(0x07), w(0xc7), w(0x31),\
+    w(0xb1), w(0x12), w(0x10), w(0x59), w(0x27), w(0x80), w(0xec), w(0x5f),\
+    w(0x60), w(0x51), w(0x7f), w(0xa9), w(0x19), w(0xb5), w(0x4a), w(0x0d),\
+    w(0x2d), w(0xe5), w(0x7a), w(0x9f), w(0x93), w(0xc9), w(0x9c), w(0xef),\
+    w(0xa0), w(0xe0), w(0x3b), w(0x4d), w(0xae), w(0x2a), w(0xf5), w(0xb0),\
+    w(0xc8), w(0xeb), w(0xbb), w(0x3c), w(0x83), w(0x53), w(0x99), w(0x61),\
+    w(0x17), w(0x2b), w(0x04), w(0x7e), w(0xba), w(0x77), w(0xd6), w(0x26),\
+    w(0xe1), w(0x69), w(0x14), w(0x63), w(0x55), w(0x21), w(0x0c), w(0x7d) }
+
+#define mm_data(w) {    /* basic data for forming finite field tables */   \
+    w(0x00), w(0x01), w(0x02), w(0x03), w(0x04), w(0x05), w(0x06), w(0x07),\
+    w(0x08), w(0x09), w(0x0a), w(0x0b), w(0x0c), w(0x0d), w(0x0e), w(0x0f),\
+    w(0x10), w(0x11), w(0x12), w(0x13), w(0x14), w(0x15), w(0x16), w(0x17),\
+    w(0x18), w(0x19), w(0x1a), w(0x1b), w(0x1c), w(0x1d), w(0x1e), w(0x1f),\
+    w(0x20), w(0x21), w(0x22), w(0x23), w(0x24), w(0x25), w(0x26), w(0x27),\
+    w(0x28), w(0x29), w(0x2a), w(0x2b), w(0x2c), w(0x2d), w(0x2e), w(0x2f),\
+    w(0x30), w(0x31), w(0x32), w(0x33), w(0x34), w(0x35), w(0x36), w(0x37),\
+    w(0x38), w(0x39), w(0x3a), w(0x3b), w(0x3c), w(0x3d), w(0x3e), w(0x3f),\
+    w(0x40), w(0x41), w(0x42), w(0x43), w(0x44), w(0x45), w(0x46), w(0x47),\
+    w(0x48), w(0x49), w(0x4a), w(0x4b), w(0x4c), w(0x4d), w(0x4e), w(0x4f),\
+    w(0x50), w(0x51), w(0x52), w(0x53), w(0x54), w(0x55), w(0x56), w(0x57),\
+    w(0x58), w(0x59), w(0x5a), w(0x5b), w(0x5c), w(0x5d), w(0x5e), w(0x5f),\
+    w(0x60), w(0x61), w(0x62), w(0x63), w(0x64), w(0x65), w(0x66), w(0x67),\
+    w(0x68), w(0x69), w(0x6a), w(0x6b), w(0x6c), w(0x6d), w(0x6e), w(0x6f),\
+    w(0x70), w(0x71), w(0x72), w(0x73), w(0x74), w(0x75), w(0x76), w(0x77),\
+    w(0x78), w(0x79), w(0x7a), w(0x7b), w(0x7c), w(0x7d), w(0x7e), w(0x7f),\
+    w(0x80), w(0x81), w(0x82), w(0x83), w(0x84), w(0x85), w(0x86), w(0x87),\
+    w(0x88), w(0x89), w(0x8a), w(0x8b), w(0x8c), w(0x8d), w(0x8e), w(0x8f),\
+    w(0x90), w(0x91), w(0x92), w(0x93), w(0x94), w(0x95), w(0x96), w(0x97),\
+    w(0x98), w(0x99), w(0x9a), w(0x9b), w(0x9c), w(0x9d), w(0x9e), w(0x9f),\
+    w(0xa0), w(0xa1), w(0xa2), w(0xa3), w(0xa4), w(0xa5), w(0xa6), w(0xa7),\
+    w(0xa8), w(0xa9), w(0xaa), w(0xab), w(0xac), w(0xad), w(0xae), w(0xaf),\
+    w(0xb0), w(0xb1), w(0xb2), w(0xb3), w(0xb4), w(0xb5), w(0xb6), w(0xb7),\
+    w(0xb8), w(0xb9), w(0xba), w(0xbb), w(0xbc), w(0xbd), w(0xbe), w(0xbf),\
+    w(0xc0), w(0xc1), w(0xc2), w(0xc3), w(0xc4), w(0xc5), w(0xc6), w(0xc7),\
+    w(0xc8), w(0xc9), w(0xca), w(0xcb), w(0xcc), w(0xcd), w(0xce), w(0xcf),\
+    w(0xd0), w(0xd1), w(0xd2), w(0xd3), w(0xd4), w(0xd5), w(0xd6), w(0xd7),\
+    w(0xd8), w(0xd9), w(0xda), w(0xdb), w(0xdc), w(0xdd), w(0xde), w(0xdf),\
+    w(0xe0), w(0xe1), w(0xe2), w(0xe3), w(0xe4), w(0xe5), w(0xe6), w(0xe7),\
+    w(0xe8), w(0xe9), w(0xea), w(0xeb), w(0xec), w(0xed), w(0xee), w(0xef),\
+    w(0xf0), w(0xf1), w(0xf2), w(0xf3), w(0xf4), w(0xf5), w(0xf6), w(0xf7),\
+    w(0xf8), w(0xf9), w(0xfa), w(0xfb), w(0xfc), w(0xfd), w(0xfe), w(0xff) }
+
+static const uint_8t sbox[256]  =  sb_data(f1);
+static const uint_8t isbox[256] = isb_data(f1);
+
+static const uint_8t gfm2_sbox[256] = sb_data(f2);
+static const uint_8t gfm3_sbox[256] = sb_data(f3);
+
+static const uint_8t gfmul_9[256] = mm_data(f9);
+static const uint_8t gfmul_b[256] = mm_data(fb);
+static const uint_8t gfmul_d[256] = mm_data(fd);
+static const uint_8t gfmul_e[256] = mm_data(fe);
+
+#define s_box(x)     sbox[(x)]
+#define is_box(x)    isbox[(x)]
+#define gfm2_sb(x)   gfm2_sbox[(x)]
+#define gfm3_sb(x)   gfm3_sbox[(x)]
+#define gfm_9(x)     gfmul_9[(x)]
+#define gfm_b(x)     gfmul_b[(x)]
+#define gfm_d(x)     gfmul_d[(x)]
+#define gfm_e(x)     gfmul_e[(x)]
+
+#else
+
+/* this is the high bit of x right shifted by 1 */
+/* position. Since the starting polynomial has  */
+/* 9 bits (0x11b), this right shift keeps the   */
+/* values of all top bits within a byte         */
+
+static uint_8t hibit(const uint_8t x)
+{   uint_8t r = (uint_8t)((x >> 1) | (x >> 2));
+
+    r |= (r >> 2);
+    r |= (r >> 4);
+    return (r + 1) >> 1;
+}
+
+/* return the inverse of the finite field element x */
+
+static uint_8t gf_inv(const uint_8t x)
+{   uint_8t p1 = x, p2 = BPOLY, n1 = hibit(x), n2 = 0x80, v1 = 1, v2 = 0;
+
+    if(x < 2)
+        return x;
+
+    for( ; ; )
+    {
+        if(n1)
+            while(n2 >= n1)             /* divide polynomial p2 by p1    */
+            {
+                n2 /= n1;               /* shift smaller polynomial left */
+                p2 ^= (p1 * n2) & 0xff; /* and remove from larger one    */
+                v2 ^= (v1 * n2);        /* shift accumulated value and   */
+                n2 = hibit(p2);         /* add into result               */
+            }
+        else
+            return v1;
+
+        if(n2)                          /* repeat with values swapped    */
+            while(n1 >= n2)
+            {
+                n1 /= n2;
+                p1 ^= p2 * n1;
+                v1 ^= v2 * n1;
+                n1 = hibit(p1);
+            }
+        else
+            return v2;
+    }
+}
+
+/* The forward and inverse affine transformations used in the S-box */
+uint_8t fwd_affine(const uint_8t x)
+{
+#if defined( HAVE_UINT_32T )
+    uint_32t w = x;
+    w ^= (w << 1) ^ (w << 2) ^ (w << 3) ^ (w << 4);
+    return 0x63 ^ ((w ^ (w >> 8)) & 0xff);
+#else
+    return 0x63 ^ x ^ (x << 1) ^ (x << 2) ^ (x << 3) ^ (x << 4)
+                    ^ (x >> 7) ^ (x >> 6) ^ (x >> 5) ^ (x >> 4);
+#endif
+}
+
+uint_8t inv_affine(const uint_8t x)
+{
+#if defined( HAVE_UINT_32T )
+    uint_32t w = x;
+    w = (w << 1) ^ (w << 3) ^ (w << 6);
+    return 0x05 ^ ((w ^ (w >> 8)) & 0xff);
+#else
+    return 0x05 ^ (x << 1) ^ (x << 3) ^ (x << 6)
+                ^ (x >> 7) ^ (x >> 5) ^ (x >> 2);
+#endif
+}
+
+#define s_box(x)   fwd_affine(gf_inv(x))
+#define is_box(x)  gf_inv(inv_affine(x))
+#define gfm2_sb(x) f2(s_box(x))
+#define gfm3_sb(x) f3(s_box(x))
+#define gfm_9(x)   f9(x)
+#define gfm_b(x)   fb(x)
+#define gfm_d(x)   fd(x)
+#define gfm_e(x)   fe(x)
+
+#endif
+
+#if defined( HAVE_MEMCPY )
+#  define block_copy_nn(d, s, l)    memcpy(d, s, l)
+#  define block_copy(d, s)          memcpy(d, s, N_BLOCK)
+#else
+#  define block_copy_nn(d, s, l)    copy_block_nn(d, s, l)
+#  define block_copy(d, s)          copy_block(d, s)
+#endif
+
+#if !defined( HAVE_MEMCPY )
+static void copy_block( void *d, const void *s )
+{
+#if defined( HAVE_UINT_32T )
+    ((uint_32t*)d)[ 0] = ((uint_32t*)s)[ 0];
+    ((uint_32t*)d)[ 1] = ((uint_32t*)s)[ 1];
+    ((uint_32t*)d)[ 2] = ((uint_32t*)s)[ 2];
+    ((uint_32t*)d)[ 3] = ((uint_32t*)s)[ 3];
+#else
+    ((uint_8t*)d)[ 0] = ((uint_8t*)s)[ 0];
+    ((uint_8t*)d)[ 1] = ((uint_8t*)s)[ 1];
+    ((uint_8t*)d)[ 2] = ((uint_8t*)s)[ 2];
+    ((uint_8t*)d)[ 3] = ((uint_8t*)s)[ 3];
+    ((uint_8t*)d)[ 4] = ((uint_8t*)s)[ 4];
+    ((uint_8t*)d)[ 5] = ((uint_8t*)s)[ 5];
+    ((uint_8t*)d)[ 6] = ((uint_8t*)s)[ 6];
+    ((uint_8t*)d)[ 7] = ((uint_8t*)s)[ 7];
+    ((uint_8t*)d)[ 8] = ((uint_8t*)s)[ 8];
+    ((uint_8t*)d)[ 9] = ((uint_8t*)s)[ 9];
+    ((uint_8t*)d)[10] = ((uint_8t*)s)[10];
+    ((uint_8t*)d)[11] = ((uint_8t*)s)[11];
+    ((uint_8t*)d)[12] = ((uint_8t*)s)[12];
+    ((uint_8t*)d)[13] = ((uint_8t*)s)[13];
+    ((uint_8t*)d)[14] = ((uint_8t*)s)[14];
+    ((uint_8t*)d)[15] = ((uint_8t*)s)[15];
+#endif
+}
+
+static void copy_block_nn( void * d, const void *s, uint_8t nn )
+{
+    while( nn-- )
+        *((uint_8t*)d)++ = *((uint_8t*)s)++;
+}
+#endif
+
+static void xor_block( void *d, const void *s )
+{
+#if defined( HAVE_UINT_32T )
+    ((uint_32t*)d)[ 0] ^= ((uint_32t*)s)[ 0];
+    ((uint_32t*)d)[ 1] ^= ((uint_32t*)s)[ 1];
+    ((uint_32t*)d)[ 2] ^= ((uint_32t*)s)[ 2];
+    ((uint_32t*)d)[ 3] ^= ((uint_32t*)s)[ 3];
+#else
+    ((uint_8t*)d)[ 0] ^= ((uint_8t*)s)[ 0];
+    ((uint_8t*)d)[ 1] ^= ((uint_8t*)s)[ 1];
+    ((uint_8t*)d)[ 2] ^= ((uint_8t*)s)[ 2];
+    ((uint_8t*)d)[ 3] ^= ((uint_8t*)s)[ 3];
+    ((uint_8t*)d)[ 4] ^= ((uint_8t*)s)[ 4];
+    ((uint_8t*)d)[ 5] ^= ((uint_8t*)s)[ 5];
+    ((uint_8t*)d)[ 6] ^= ((uint_8t*)s)[ 6];
+    ((uint_8t*)d)[ 7] ^= ((uint_8t*)s)[ 7];
+    ((uint_8t*)d)[ 8] ^= ((uint_8t*)s)[ 8];
+    ((uint_8t*)d)[ 9] ^= ((uint_8t*)s)[ 9];
+    ((uint_8t*)d)[10] ^= ((uint_8t*)s)[10];
+    ((uint_8t*)d)[11] ^= ((uint_8t*)s)[11];
+    ((uint_8t*)d)[12] ^= ((uint_8t*)s)[12];
+    ((uint_8t*)d)[13] ^= ((uint_8t*)s)[13];
+    ((uint_8t*)d)[14] ^= ((uint_8t*)s)[14];
+    ((uint_8t*)d)[15] ^= ((uint_8t*)s)[15];
+#endif
+}
+
+static void copy_and_key( void *d, const void *s, const void *k )
+{
+#if defined( HAVE_UINT_32T )
+    ((uint_32t*)d)[ 0] = ((uint_32t*)s)[ 0] ^ ((uint_32t*)k)[ 0];
+    ((uint_32t*)d)[ 1] = ((uint_32t*)s)[ 1] ^ ((uint_32t*)k)[ 1];
+    ((uint_32t*)d)[ 2] = ((uint_32t*)s)[ 2] ^ ((uint_32t*)k)[ 2];
+    ((uint_32t*)d)[ 3] = ((uint_32t*)s)[ 3] ^ ((uint_32t*)k)[ 3];
+#elif 1
+    ((uint_8t*)d)[ 0] = ((uint_8t*)s)[ 0] ^ ((uint_8t*)k)[ 0];
+    ((uint_8t*)d)[ 1] = ((uint_8t*)s)[ 1] ^ ((uint_8t*)k)[ 1];
+    ((uint_8t*)d)[ 2] = ((uint_8t*)s)[ 2] ^ ((uint_8t*)k)[ 2];
+    ((uint_8t*)d)[ 3] = ((uint_8t*)s)[ 3] ^ ((uint_8t*)k)[ 3];
+    ((uint_8t*)d)[ 4] = ((uint_8t*)s)[ 4] ^ ((uint_8t*)k)[ 4];
+    ((uint_8t*)d)[ 5] = ((uint_8t*)s)[ 5] ^ ((uint_8t*)k)[ 5];
+    ((uint_8t*)d)[ 6] = ((uint_8t*)s)[ 6] ^ ((uint_8t*)k)[ 6];
+    ((uint_8t*)d)[ 7] = ((uint_8t*)s)[ 7] ^ ((uint_8t*)k)[ 7];
+    ((uint_8t*)d)[ 8] = ((uint_8t*)s)[ 8] ^ ((uint_8t*)k)[ 8];
+    ((uint_8t*)d)[ 9] = ((uint_8t*)s)[ 9] ^ ((uint_8t*)k)[ 9];
+    ((uint_8t*)d)[10] = ((uint_8t*)s)[10] ^ ((uint_8t*)k)[10];
+    ((uint_8t*)d)[11] = ((uint_8t*)s)[11] ^ ((uint_8t*)k)[11];
+    ((uint_8t*)d)[12] = ((uint_8t*)s)[12] ^ ((uint_8t*)k)[12];
+    ((uint_8t*)d)[13] = ((uint_8t*)s)[13] ^ ((uint_8t*)k)[13];
+    ((uint_8t*)d)[14] = ((uint_8t*)s)[14] ^ ((uint_8t*)k)[14];
+    ((uint_8t*)d)[15] = ((uint_8t*)s)[15] ^ ((uint_8t*)k)[15];
+#else
+    block_copy(d, s);
+    xor_block(d, k);
+#endif
+}
+
+static void add_round_key( uint_8t d[N_BLOCK], const uint_8t k[N_BLOCK] )
+{
+    xor_block(d, k);
+}
+
+static void shift_sub_rows( uint_8t st[N_BLOCK] )
+{   uint_8t tt;
+
+    st[ 0] = s_box(st[ 0]); st[ 4] = s_box(st[ 4]);
+    st[ 8] = s_box(st[ 8]); st[12] = s_box(st[12]);
+
+    tt = st[1]; st[ 1] = s_box(st[ 5]); st[ 5] = s_box(st[ 9]);
+    st[ 9] = s_box(st[13]); st[13] = s_box( tt );
+
+    tt = st[2]; st[ 2] = s_box(st[10]); st[10] = s_box( tt );
+    tt = st[6]; st[ 6] = s_box(st[14]); st[14] = s_box( tt );
+
+    tt = st[15]; st[15] = s_box(st[11]); st[11] = s_box(st[ 7]);
+    st[ 7] = s_box(st[ 3]); st[ 3] = s_box( tt );
+}
+
+static void inv_shift_sub_rows( uint_8t st[N_BLOCK] )
+{   uint_8t tt;
+
+    st[ 0] = is_box(st[ 0]); st[ 4] = is_box(st[ 4]);
+    st[ 8] = is_box(st[ 8]); st[12] = is_box(st[12]);
+
+    tt = st[13]; st[13] = is_box(st[9]); st[ 9] = is_box(st[5]);
+    st[ 5] = is_box(st[1]); st[ 1] = is_box( tt );
+
+    tt = st[2]; st[ 2] = is_box(st[10]); st[10] = is_box( tt );
+    tt = st[6]; st[ 6] = is_box(st[14]); st[14] = is_box( tt );
+
+    tt = st[3]; st[ 3] = is_box(st[ 7]); st[ 7] = is_box(st[11]);
+    st[11] = is_box(st[15]); st[15] = is_box( tt );
+}
+
+#if defined( VERSION_1 )
+  static void mix_sub_columns( uint_8t dt[N_BLOCK] )
+  { uint_8t st[N_BLOCK];
+    block_copy(st, dt);
+#else
+  static void mix_sub_columns( uint_8t dt[N_BLOCK], uint_8t st[N_BLOCK] )
+  {
+#endif
+    dt[ 0] = gfm2_sb(st[0]) ^ gfm3_sb(st[5]) ^ s_box(st[10]) ^ s_box(st[15]);
+    dt[ 1] = s_box(st[0]) ^ gfm2_sb(st[5]) ^ gfm3_sb(st[10]) ^ s_box(st[15]);
+    dt[ 2] = s_box(st[0]) ^ s_box(st[5]) ^ gfm2_sb(st[10]) ^ gfm3_sb(st[15]);
+    dt[ 3] = gfm3_sb(st[0]) ^ s_box(st[5]) ^ s_box(st[10]) ^ gfm2_sb(st[15]);
+
+    dt[ 4] = gfm2_sb(st[4]) ^ gfm3_sb(st[9]) ^ s_box(st[14]) ^ s_box(st[3]);
+    dt[ 5] = s_box(st[4]) ^ gfm2_sb(st[9]) ^ gfm3_sb(st[14]) ^ s_box(st[3]);
+    dt[ 6] = s_box(st[4]) ^ s_box(st[9]) ^ gfm2_sb(st[14]) ^ gfm3_sb(st[3]);
+    dt[ 7] = gfm3_sb(st[4]) ^ s_box(st[9]) ^ s_box(st[14]) ^ gfm2_sb(st[3]);
+
+    dt[ 8] = gfm2_sb(st[8]) ^ gfm3_sb(st[13]) ^ s_box(st[2]) ^ s_box(st[7]);
+    dt[ 9] = s_box(st[8]) ^ gfm2_sb(st[13]) ^ gfm3_sb(st[2]) ^ s_box(st[7]);
+    dt[10] = s_box(st[8]) ^ s_box(st[13]) ^ gfm2_sb(st[2]) ^ gfm3_sb(st[7]);
+    dt[11] = gfm3_sb(st[8]) ^ s_box(st[13]) ^ s_box(st[2]) ^ gfm2_sb(st[7]);
+
+    dt[12] = gfm2_sb(st[12]) ^ gfm3_sb(st[1]) ^ s_box(st[6]) ^ s_box(st[11]);
+    dt[13] = s_box(st[12]) ^ gfm2_sb(st[1]) ^ gfm3_sb(st[6]) ^ s_box(st[11]);
+    dt[14] = s_box(st[12]) ^ s_box(st[1]) ^ gfm2_sb(st[6]) ^ gfm3_sb(st[11]);
+    dt[15] = gfm3_sb(st[12]) ^ s_box(st[1]) ^ s_box(st[6]) ^ gfm2_sb(st[11]);
+  }
+
+#if defined( VERSION_1 )
+  static void inv_mix_sub_columns( uint_8t dt[N_BLOCK] )
+  { uint_8t st[N_BLOCK];
+    block_copy(st, dt);
+#else
+  static void inv_mix_sub_columns( uint_8t dt[N_BLOCK], uint_8t st[N_BLOCK] )
+  {
+#endif
+    dt[ 0] = is_box(gfm_e(st[ 0]) ^ gfm_b(st[ 1]) ^ gfm_d(st[ 2]) ^ gfm_9(st[ 3]));
+    dt[ 5] = is_box(gfm_9(st[ 0]) ^ gfm_e(st[ 1]) ^ gfm_b(st[ 2]) ^ gfm_d(st[ 3]));
+    dt[10] = is_box(gfm_d(st[ 0]) ^ gfm_9(st[ 1]) ^ gfm_e(st[ 2]) ^ gfm_b(st[ 3]));
+    dt[15] = is_box(gfm_b(st[ 0]) ^ gfm_d(st[ 1]) ^ gfm_9(st[ 2]) ^ gfm_e(st[ 3]));
+
+    dt[ 4] = is_box(gfm_e(st[ 4]) ^ gfm_b(st[ 5]) ^ gfm_d(st[ 6]) ^ gfm_9(st[ 7]));
+    dt[ 9] = is_box(gfm_9(st[ 4]) ^ gfm_e(st[ 5]) ^ gfm_b(st[ 6]) ^ gfm_d(st[ 7]));
+    dt[14] = is_box(gfm_d(st[ 4]) ^ gfm_9(st[ 5]) ^ gfm_e(st[ 6]) ^ gfm_b(st[ 7]));
+    dt[ 3] = is_box(gfm_b(st[ 4]) ^ gfm_d(st[ 5]) ^ gfm_9(st[ 6]) ^ gfm_e(st[ 7]));
+
+    dt[ 8] = is_box(gfm_e(st[ 8]) ^ gfm_b(st[ 9]) ^ gfm_d(st[10]) ^ gfm_9(st[11]));
+    dt[13] = is_box(gfm_9(st[ 8]) ^ gfm_e(st[ 9]) ^ gfm_b(st[10]) ^ gfm_d(st[11]));
+    dt[ 2] = is_box(gfm_d(st[ 8]) ^ gfm_9(st[ 9]) ^ gfm_e(st[10]) ^ gfm_b(st[11]));
+    dt[ 7] = is_box(gfm_b(st[ 8]) ^ gfm_d(st[ 9]) ^ gfm_9(st[10]) ^ gfm_e(st[11]));
+
+    dt[12] = is_box(gfm_e(st[12]) ^ gfm_b(st[13]) ^ gfm_d(st[14]) ^ gfm_9(st[15]));
+    dt[ 1] = is_box(gfm_9(st[12]) ^ gfm_e(st[13]) ^ gfm_b(st[14]) ^ gfm_d(st[15]));
+    dt[ 6] = is_box(gfm_d(st[12]) ^ gfm_9(st[13]) ^ gfm_e(st[14]) ^ gfm_b(st[15]));
+    dt[11] = is_box(gfm_b(st[12]) ^ gfm_d(st[13]) ^ gfm_9(st[14]) ^ gfm_e(st[15]));
+  }
+
+#if defined( AES_ENC_PREKEYED ) || defined( AES_DEC_PREKEYED )
+
+/*  Set the cipher key for the pre-keyed version */
+
+return_type aes_set_key( const unsigned char key[], length_type keylen, aes_context ctx[1] )
+{
+    uint_8t cc, rc, hi;
+
+    switch( keylen )
+    {
+    case 16:
+    case 128:
+        keylen = 16;
+        break;
+    case 24:
+    case 192:
+        keylen = 24;
+        break;
+    case 32:
+    case 256:
+        keylen = 32;
+        break;
+    default:
+        ctx->rnd = 0;
+        return (return_type)-1;
+    }
+    block_copy_nn(ctx->ksch, key, keylen);
+    hi = (keylen + 28) << 2;
+    ctx->rnd = (hi >> 4) - 1;
+    for( cc = keylen, rc = 1; cc < hi; cc += 4 )
+    {   uint_8t tt, t0, t1, t2, t3;
+
+        t0 = ctx->ksch[cc - 4];
+        t1 = ctx->ksch[cc - 3];
+        t2 = ctx->ksch[cc - 2];
+        t3 = ctx->ksch[cc - 1];
+        if( cc % keylen == 0 )
+        {
+            tt = t0;
+            t0 = s_box(t1) ^ rc;
+            t1 = s_box(t2);
+            t2 = s_box(t3);
+            t3 = s_box(tt);
+            rc = f2(rc);
+        }
+        else if( keylen > 24 && cc % keylen == 16 )
+        {
+            t0 = s_box(t0);
+            t1 = s_box(t1);
+            t2 = s_box(t2);
+            t3 = s_box(t3);
+        }
+        tt = cc - keylen;
+        ctx->ksch[cc + 0] = ctx->ksch[tt + 0] ^ t0;
+        ctx->ksch[cc + 1] = ctx->ksch[tt + 1] ^ t1;
+        ctx->ksch[cc + 2] = ctx->ksch[tt + 2] ^ t2;
+        ctx->ksch[cc + 3] = ctx->ksch[tt + 3] ^ t3;
+    }
+    return 0;
+}
+
+#endif
+
+#if defined( AES_ENC_PREKEYED )
+
+/*  Encrypt a single block of 16 bytes */
+
+return_type aes_encrypt( const unsigned char in[N_BLOCK], unsigned char  out[N_BLOCK], const aes_context ctx[1] )
+{
+    if( ctx->rnd )
+    {
+        uint_8t s1[N_BLOCK], r;
+        copy_and_key( s1, in, ctx->ksch );
+
+        for( r = 1 ; r < ctx->rnd ; ++r )
+#if defined( VERSION_1 )
+        {
+            mix_sub_columns( s1 );
+            add_round_key( s1, ctx->ksch + r * N_BLOCK);
+        }
+#else
+        {   uint_8t s2[N_BLOCK];
+            mix_sub_columns( s2, s1 );
+            copy_and_key( s1, s2, ctx->ksch + r * N_BLOCK);
+        }
+#endif
+        shift_sub_rows( s1 );
+        copy_and_key( out, s1, ctx->ksch + r * N_BLOCK );
+    }
+    else
+        return (return_type)-1;
+    return 0;
+}
+
+/* CBC encrypt a number of blocks (input and return an IV) */
+
+return_type aes_cbc_encrypt( const unsigned char *in, unsigned char *out,
+                         int n_block, unsigned char iv[N_BLOCK], const aes_context ctx[1] )
+{
+
+    while(n_block--)
+    {
+        xor_block(iv, in);
+        if(aes_encrypt(iv, iv, ctx) != EXIT_SUCCESS)
+			return EXIT_FAILURE;
+        memcpy(out, iv, N_BLOCK);
+        in += N_BLOCK;
+        out += N_BLOCK;
+    }
+    return EXIT_SUCCESS;
+}
+
+#endif
+
+#if defined( AES_DEC_PREKEYED )
+
+/*  Decrypt a single block of 16 bytes */
+
+return_type aes_decrypt( const unsigned char in[N_BLOCK], unsigned char out[N_BLOCK], const aes_context ctx[1] )
+{
+    if( ctx->rnd )
+    {
+        uint_8t s1[N_BLOCK], r;
+        copy_and_key( s1, in, ctx->ksch + ctx->rnd * N_BLOCK );
+        inv_shift_sub_rows( s1 );
+
+        for( r = ctx->rnd ; --r ; )
+#if defined( VERSION_1 )
+        {
+            add_round_key( s1, ctx->ksch + r * N_BLOCK );
+            inv_mix_sub_columns( s1 );
+        }
+#else
+        {   uint_8t s2[N_BLOCK];
+            copy_and_key( s2, s1, ctx->ksch + r * N_BLOCK );
+            inv_mix_sub_columns( s1, s2 );
+        }
+#endif
+        copy_and_key( out, s1, ctx->ksch );
+    }
+    else
+        return (return_type)-1;
+    return 0;
+}
+
+/* CBC decrypt a number of blocks (input and return an IV) */
+
+return_type aes_cbc_decrypt( const unsigned char *in, unsigned char *out,
+                         int n_block, unsigned char iv[N_BLOCK], const aes_context ctx[1] )
+{
+    while(n_block--)
+    {   uint_8t tmp[N_BLOCK];
+
+        memcpy(tmp, in, N_BLOCK);
+        if(aes_decrypt(in, out, ctx) != EXIT_SUCCESS)
+			return EXIT_FAILURE;
+        xor_block(out, iv);
+        memcpy(iv, tmp, N_BLOCK);
+        in += N_BLOCK;
+        out += N_BLOCK;
+    }
+    return EXIT_SUCCESS;
+}
+
+#endif
+
+#if defined( AES_ENC_128_OTFK )
+
+/*  The 'on the fly' encryption key update for for 128 bit keys */
+
+static void update_encrypt_key_128( uint_8t k[N_BLOCK], uint_8t *rc )
+{   uint_8t cc;
+
+    k[0] ^= s_box(k[13]) ^ *rc;
+    k[1] ^= s_box(k[14]);
+    k[2] ^= s_box(k[15]);
+    k[3] ^= s_box(k[12]);
+    *rc = f2( *rc );
+
+    for(cc = 4; cc < 16; cc += 4 )
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+}
+
+/*  Encrypt a single block of 16 bytes with 'on the fly' 128 bit keying */
+
+void aes_encrypt_128( const unsigned char in[N_BLOCK], unsigned char out[N_BLOCK],
+                     const unsigned char key[N_BLOCK], unsigned char o_key[N_BLOCK] )
+{   uint_8t s1[N_BLOCK], r, rc = 1;
+
+    if(o_key != key)
+        block_copy( o_key, key );
+    copy_and_key( s1, in, o_key );
+
+    for( r = 1 ; r < 10 ; ++r )
+#if defined( VERSION_1 )
+    {
+        mix_sub_columns( s1 );
+        update_encrypt_key_128( o_key, &rc );
+        add_round_key( s1, o_key );
+    }
+#else
+    {   uint_8t s2[N_BLOCK];
+        mix_sub_columns( s2, s1 );
+        update_encrypt_key_128( o_key, &rc );
+        copy_and_key( s1, s2, o_key );
+    }
+#endif
+
+    shift_sub_rows( s1 );
+    update_encrypt_key_128( o_key, &rc );
+    copy_and_key( out, s1, o_key );
+}
+
+#endif
+
+#if defined( AES_DEC_128_OTFK )
+
+/*  The 'on the fly' decryption key update for for 128 bit keys */
+
+static void update_decrypt_key_128( uint_8t k[N_BLOCK], uint_8t *rc )
+{   uint_8t cc;
+
+    for( cc = 12; cc > 0; cc -= 4 )
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+    *rc = d2(*rc);
+    k[0] ^= s_box(k[13]) ^ *rc;
+    k[1] ^= s_box(k[14]);
+    k[2] ^= s_box(k[15]);
+    k[3] ^= s_box(k[12]);
+}
+
+/*  Decrypt a single block of 16 bytes with 'on the fly' 128 bit keying */
+
+void aes_decrypt_128( const unsigned char in[N_BLOCK], unsigned char out[N_BLOCK],
+                      const unsigned char key[N_BLOCK], unsigned char o_key[N_BLOCK] )
+{
+    uint_8t s1[N_BLOCK], r, rc = 0x6c;
+    if(o_key != key)
+        block_copy( o_key, key );
+
+    copy_and_key( s1, in, o_key );
+    inv_shift_sub_rows( s1 );
+
+    for( r = 10 ; --r ; )
+#if defined( VERSION_1 )
+    {
+        update_decrypt_key_128( o_key, &rc );
+        add_round_key( s1, o_key );
+        inv_mix_sub_columns( s1 );
+    }
+#else
+    {   uint_8t s2[N_BLOCK];
+        update_decrypt_key_128( o_key, &rc );
+        copy_and_key( s2, s1, o_key );
+        inv_mix_sub_columns( s1, s2 );
+    }
+#endif
+    update_decrypt_key_128( o_key, &rc );
+    copy_and_key( out, s1, o_key );
+}
+
+#endif
+
+#if defined( AES_ENC_256_OTFK )
+
+/*  The 'on the fly' encryption key update for for 256 bit keys */
+
+static void update_encrypt_key_256( uint_8t k[2 * N_BLOCK], uint_8t *rc )
+{   uint_8t cc;
+
+    k[0] ^= s_box(k[29]) ^ *rc;
+    k[1] ^= s_box(k[30]);
+    k[2] ^= s_box(k[31]);
+    k[3] ^= s_box(k[28]);
+    *rc = f2( *rc );
+
+    for(cc = 4; cc < 16; cc += 4)
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+
+    k[16] ^= s_box(k[12]);
+    k[17] ^= s_box(k[13]);
+    k[18] ^= s_box(k[14]);
+    k[19] ^= s_box(k[15]);
+
+    for( cc = 20; cc < 32; cc += 4 )
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+}
+
+/*  Encrypt a single block of 16 bytes with 'on the fly' 256 bit keying */
+
+void aes_encrypt_256( const unsigned char in[N_BLOCK], unsigned char out[N_BLOCK],
+                      const unsigned char key[2 * N_BLOCK], unsigned char o_key[2 * N_BLOCK] )
+{
+    uint_8t s1[N_BLOCK], r, rc = 1;
+    if(o_key != key)
+    {
+        block_copy( o_key, key );
+        block_copy( o_key + 16, key + 16 );
+    }
+    copy_and_key( s1, in, o_key );
+
+    for( r = 1 ; r < 14 ; ++r )
+#if defined( VERSION_1 )
+    {
+        mix_sub_columns(s1);
+        if( r & 1 )
+            add_round_key( s1, o_key + 16 );
+        else
+        {
+            update_encrypt_key_256( o_key, &rc );
+            add_round_key( s1, o_key );
+        }
+    }
+#else
+    {   uint_8t s2[N_BLOCK];
+        mix_sub_columns( s2, s1 );
+        if( r & 1 )
+            copy_and_key( s1, s2, o_key + 16 );
+        else
+        {
+            update_encrypt_key_256( o_key, &rc );
+            copy_and_key( s1, s2, o_key );
+        }
+    }
+#endif
+
+    shift_sub_rows( s1 );
+    update_encrypt_key_256( o_key, &rc );
+    copy_and_key( out, s1, o_key );
+}
+
+#endif
+
+#if defined( AES_DEC_256_OTFK )
+
+/*  The 'on the fly' encryption key update for for 256 bit keys */
+
+static void update_decrypt_key_256( uint_8t k[2 * N_BLOCK], uint_8t *rc )
+{   uint_8t cc;
+
+    for(cc = 28; cc > 16; cc -= 4)
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+
+    k[16] ^= s_box(k[12]);
+    k[17] ^= s_box(k[13]);
+    k[18] ^= s_box(k[14]);
+    k[19] ^= s_box(k[15]);
+
+    for(cc = 12; cc > 0; cc -= 4)
+    {
+        k[cc + 0] ^= k[cc - 4];
+        k[cc + 1] ^= k[cc - 3];
+        k[cc + 2] ^= k[cc - 2];
+        k[cc + 3] ^= k[cc - 1];
+    }
+
+    *rc = d2(*rc);
+    k[0] ^= s_box(k[29]) ^ *rc;
+    k[1] ^= s_box(k[30]);
+    k[2] ^= s_box(k[31]);
+    k[3] ^= s_box(k[28]);
+}
+
+/*  Decrypt a single block of 16 bytes with 'on the fly'
+    256 bit keying
+*/
+void aes_decrypt_256( const unsigned char in[N_BLOCK], unsigned char out[N_BLOCK],
+                      const unsigned char key[2 * N_BLOCK], unsigned char o_key[2 * N_BLOCK] )
+{
+    uint_8t s1[N_BLOCK], r, rc = 0x80;
+
+    if(o_key != key)
+    {
+        block_copy( o_key, key );
+        block_copy( o_key + 16, key + 16 );
+    }
+
+    copy_and_key( s1, in, o_key );
+    inv_shift_sub_rows( s1 );
+
+    for( r = 14 ; --r ; )
+#if defined( VERSION_1 )
+    {
+        if( ( r & 1 ) )
+        {
+            update_decrypt_key_256( o_key, &rc );
+            add_round_key( s1, o_key + 16 );
+        }
+        else
+            add_round_key( s1, o_key );
+        inv_mix_sub_columns( s1 );
+    }
+#else
+    {   uint_8t s2[N_BLOCK];
+        if( ( r & 1 ) )
+        {
+            update_decrypt_key_256( o_key, &rc );
+            copy_and_key( s2, s1, o_key + 16 );
+        }
+        else
+            copy_and_key( s2, s1, o_key );
+        inv_mix_sub_columns( s1, s2 );
+    }
+#endif
+    copy_and_key( out, s1, o_key );
+}
+
+#endif
diff --git a/stack/smp/aes.h b/stack/smp/aes.h
new file mode 100644
index 0000000..dcfde93
--- /dev/null
+++ b/stack/smp/aes.h
@@ -0,0 +1,162 @@
+/*
+ ---------------------------------------------------------------------------
+ Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved.
+
+ LICENSE TERMS
+
+ The redistribution and use of this software (with or without changes)
+ is allowed without the payment of fees or royalties provided that:
+
+  1. source code distributions include the above copyright notice, this
+     list of conditions and the following disclaimer;
+
+  2. binary distributions include the above copyright notice, this list
+     of conditions and the following disclaimer in their documentation;
+
+  3. the name of the copyright holder is not used to endorse products
+     built using this software without specific written permission.
+
+ DISCLAIMER
+
+ This software is provided 'as is' with no explicit or implied warranties
+ in respect of its properties, including, but not limited to, correctness
+ and/or fitness for purpose.
+ ---------------------------------------------------------------------------
+ Issue 09/09/2006
+
+ This is an AES implementation that uses only 8-bit byte operations on the
+ cipher state.
+ */
+
+#ifndef AES_H
+#define AES_H
+
+#if 1
+#  define AES_ENC_PREKEYED  /* AES encryption with a precomputed key schedule  */
+#endif
+#if 1
+#  define AES_DEC_PREKEYED  /* AES decryption with a precomputed key schedule  */
+#endif
+#if 1
+#  define AES_ENC_128_OTFK  /* AES encryption with 'on the fly' 128 bit keying */
+#endif
+#if 1
+#  define AES_DEC_128_OTFK  /* AES decryption with 'on the fly' 128 bit keying */
+#endif
+#if 1
+#  define AES_ENC_256_OTFK  /* AES encryption with 'on the fly' 256 bit keying */
+#endif
+#if 1
+#  define AES_DEC_256_OTFK  /* AES decryption with 'on the fly' 256 bit keying */
+#endif
+
+#define N_ROW                   4
+#define N_COL                   4
+#define N_BLOCK   (N_ROW * N_COL)
+#define N_MAX_ROUNDS           14
+
+typedef unsigned char uint_8t;
+
+typedef uint_8t return_type;
+
+/*  Warning: The key length for 256 bit keys overflows a byte
+    (see comment below)
+*/
+
+typedef uint_8t length_type;
+
+typedef struct
+{   uint_8t ksch[(N_MAX_ROUNDS + 1) * N_BLOCK];
+    uint_8t rnd;
+} aes_context;
+
+/*  The following calls are for a precomputed key schedule
+
+    NOTE: If the length_type used for the key length is an
+    unsigned 8-bit character, a key length of 256 bits must
+    be entered as a length in bytes (valid inputs are hence
+    128, 192, 16, 24 and 32).
+*/
+
+#if defined( AES_ENC_PREKEYED ) || defined( AES_DEC_PREKEYED )
+
+return_type aes_set_key( const unsigned char key[],
+                         length_type keylen,
+                         aes_context ctx[1] );
+#endif
+
+#if defined( AES_ENC_PREKEYED )
+
+return_type aes_encrypt( const unsigned char in[N_BLOCK],
+                         unsigned char out[N_BLOCK],
+                         const aes_context ctx[1] );
+
+return_type aes_cbc_encrypt( const unsigned char *in,
+                         unsigned char *out,
+                         int n_block,
+                         unsigned char iv[N_BLOCK],
+                         const aes_context ctx[1] );
+#endif
+
+#if defined( AES_DEC_PREKEYED )
+
+return_type aes_decrypt( const unsigned char in[N_BLOCK],
+                         unsigned char out[N_BLOCK],
+                         const aes_context ctx[1] );
+
+return_type aes_cbc_decrypt( const unsigned char *in,
+                         unsigned char *out,
+                         int n_block,
+                         unsigned char iv[N_BLOCK],
+                         const aes_context ctx[1] );
+#endif
+
+/*  The following calls are for 'on the fly' keying.  In this case the
+    encryption and decryption keys are different.
+
+    The encryption subroutines take a key in an array of bytes in
+    key[L] where L is 16, 24 or 32 bytes for key lengths of 128,
+    192, and 256 bits respectively.  They then encrypts the input
+    data, in[] with this key and put the reult in the output array
+    out[].  In addition, the second key array, o_key[L], is used
+    to output the key that is needed by the decryption subroutine
+    to reverse the encryption operation.  The two key arrays can
+    be the same array but in this case the original key will be
+    overwritten.
+
+    In the same way, the decryption subroutines output keys that
+    can be used to reverse their effect when used for encryption.
+
+    Only 128 and 256 bit keys are supported in these 'on the fly'
+    modes.
+*/
+
+#if defined( AES_ENC_128_OTFK )
+void aes_encrypt_128( const unsigned char in[N_BLOCK],
+                      unsigned char out[N_BLOCK],
+                      const unsigned char key[N_BLOCK],
+                      uint_8t o_key[N_BLOCK] );
+#endif
+
+#if defined( AES_DEC_128_OTFK )
+void aes_decrypt_128( const unsigned char in[N_BLOCK],
+                      unsigned char out[N_BLOCK],
+                      const unsigned char key[N_BLOCK],
+                      unsigned char o_key[N_BLOCK] );
+#endif
+
+#if defined( AES_ENC_256_OTFK )
+void aes_encrypt_256( const unsigned char in[N_BLOCK],
+                      unsigned char out[N_BLOCK],
+                      const unsigned char key[2 * N_BLOCK],
+                      unsigned char o_key[2 * N_BLOCK] );
+#endif
+
+#if defined( AES_DEC_256_OTFK )
+void aes_decrypt_256( const unsigned char in[N_BLOCK],
+                      unsigned char out[N_BLOCK],
+                      const unsigned char key[2 * N_BLOCK],
+                      unsigned char o_key[2 * N_BLOCK] );
+#endif
+
+#endif
diff --git a/stack/smp/smp_act.c b/stack/smp/smp_act.c
new file mode 100644
index 0000000..ca24225
--- /dev/null
+++ b/stack/smp/smp_act.c
@@ -0,0 +1,950 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+
+    #include <string.h>
+    #include "btm_int.h"
+    #include "l2c_api.h"
+    #include "smp_int.h"
+
+
+const UINT8 smp_association_table[2][SMP_IO_CAP_MAX][SMP_IO_CAP_MAX] =
+{
+    /* initiator */
+    {{SMP_MODEL_ENC_ONLY, SMP_MODEL_ENC_ONLY,   SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_PASSKEY}, /* Display Only */
+        {SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,   SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_PASSKEY}, /* SMP_CAP_IO = 1 */
+        {SMP_MODEL_KEY_NOTIF, SMP_MODEL_KEY_NOTIF,  SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_KEY_NOTIF}, /* keyboard only */
+        {SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,   SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,    SMP_MODEL_ENC_ONLY},/* No Input No Output */
+        {SMP_MODEL_KEY_NOTIF, SMP_MODEL_KEY_NOTIF,  SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_KEY_NOTIF}}, /* keyboard display */
+    /* responder */
+    {{SMP_MODEL_ENC_ONLY, SMP_MODEL_ENC_ONLY,   SMP_MODEL_KEY_NOTIF, SMP_MODEL_ENC_ONLY,    SMP_MODEL_KEY_NOTIF}, /* Display Only */
+        {SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,   SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_KEY_NOTIF}, /* SMP_CAP_IO = 1 */
+        {SMP_MODEL_PASSKEY,   SMP_MODEL_PASSKEY,    SMP_MODEL_PASSKEY,   SMP_MODEL_ENC_ONLY,    SMP_MODEL_PASSKEY}, /* keyboard only */
+        {SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,   SMP_MODEL_ENC_ONLY,  SMP_MODEL_ENC_ONLY,    SMP_MODEL_ENC_ONLY},/* No Input No Output */
+        {SMP_MODEL_PASSKEY,   SMP_MODEL_PASSKEY,    SMP_MODEL_KEY_NOTIF, SMP_MODEL_ENC_ONLY,    SMP_MODEL_PASSKEY}} /* keyboard display */
+    /* display only */    /*SMP_CAP_IO = 1 */  /* keyboard only */   /* No InputOutput */  /* keyboard display */
+};
+
+const tSMP_ACT smp_distribute_act [] =
+{
+    smp_generate_ltk,
+    smp_send_id_info,
+    smp_generate_csrk
+};
+
+/*******************************************************************************
+** Function         smp_update_key_mask
+** Description      This function updates the key mask for sending or receiving.
+*******************************************************************************/
+static void smp_update_key_mask (tSMP_CB *p_cb, UINT8 key_type, BOOLEAN recv)
+{
+    SMP_TRACE_DEBUG0 ("smp_update_key_mask ");
+    SMP_TRACE_DEBUG4("before update role=%d recv=%d loc_i_key = %02x, loc_r_key = %02x", p_cb->role, recv, p_cb->loc_i_key, p_cb->loc_r_key);
+    if (p_cb->role == HCI_ROLE_SLAVE)
+    {
+        if (recv)
+            p_cb->loc_i_key &= ~key_type;
+        else
+            p_cb->loc_r_key &= ~key_type;
+    }
+    else
+    {
+        if (recv)
+            p_cb->loc_r_key &= ~key_type;
+        else
+            p_cb->loc_i_key &= ~key_type;
+    }
+
+    SMP_TRACE_DEBUG2("updated loc_i_key = %02x, loc_r_key = %02x", p_cb->loc_i_key, p_cb->loc_r_key);
+}
+/*******************************************************************************
+** Function     smp_io_cap_req
+** Description  send SMP IO request
+*******************************************************************************/
+void smp_send_app_cback(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tSMP_EVT_DATA   cb_data;
+    tSMP_STATUS callback_rc;
+    SMP_TRACE_DEBUG1 ("smp_send_app_cback p_cb->cb_evt=%d", p_cb->cb_evt );
+    if (p_cb->p_callback && p_cb->cb_evt != 0)
+    {
+        if (p_cb->cb_evt == SMP_IO_CAP_REQ_EVT)
+        {
+            cb_data.io_req.auth_req = p_cb->peer_auth_req;
+            cb_data.io_req.oob_data = SMP_OOB_NONE;
+            cb_data.io_req.io_cap = SMP_DEFAULT_IO_CAPS;
+            cb_data.io_req.max_key_size = SMP_MAX_ENC_KEY_SIZE;
+            cb_data.io_req.init_keys = p_cb->loc_i_key ;
+            cb_data.io_req.resp_keys = p_cb->loc_r_key ;
+
+            SMP_TRACE_WARNING1( "io_cap = %d",cb_data.io_req.io_cap);
+        }
+        callback_rc = (*p_cb->p_callback)(p_cb->cb_evt, p_cb->pairing_bda, &cb_data);
+
+        SMP_TRACE_DEBUG2 ("callback_rc=%d  p_cb->cb_evt=%d",callback_rc, p_cb->cb_evt );
+
+        if (callback_rc == SMP_SUCCESS && p_cb->cb_evt == SMP_IO_CAP_REQ_EVT)
+        {
+            p_cb->loc_auth_req   = cb_data.io_req.auth_req;
+            p_cb->loc_io_caps    = cb_data.io_req.io_cap;
+            p_cb->loc_oob_flag   = cb_data.io_req.oob_data;
+            p_cb->loc_enc_size   = cb_data.io_req.max_key_size;
+            p_cb->loc_i_key      = cb_data.io_req.init_keys;
+            p_cb->loc_r_key      = cb_data.io_req.resp_keys;
+
+            SMP_TRACE_WARNING2( "new io_cap = %d p_cb->loc_enc_size = %d",p_cb->loc_io_caps, p_cb->loc_enc_size);
+
+            smp_sm_event(p_cb, SMP_IO_RSP_EVT, NULL);
+        }
+    }
+
+    if (!p_cb->cb_evt && p_cb->discard_sec_req)
+    {
+        p_cb->discard_sec_req = FALSE;
+        smp_sm_event(p_cb, SMP_DISCARD_SEC_REQ_EVT, NULL);
+    }
+    SMP_TRACE_DEBUG0 ("smp_send_app_cback return");
+}
+/*******************************************************************************
+** Function     smp_send_pair_fail
+** Description  pairing failure to peer device if needed.
+*******************************************************************************/
+void smp_send_pair_fail(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    p_cb->status = *(UINT8 *)p_data;
+    p_cb->failure = *(UINT8 *)p_data;
+
+    SMP_TRACE_DEBUG2 ("smp_send_pair_fail status=%d failure=%d ",p_cb->status, p_cb->failure);
+
+    if (p_cb->status <= SMP_REPEATED_ATTEMPTS && p_cb->status != SMP_SUCCESS)
+    {
+        smp_send_cmd(SMP_OPCODE_PAIRING_FAILED, p_cb);
+    }
+}
+
+/*******************************************************************************
+** Function     smp_send_pair_req
+** Description  process pairing request to slave device
+*******************************************************************************/
+void smp_send_pair_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (p_cb->pairing_bda);
+    SMP_TRACE_DEBUG0 ("smp_send_pair_req  ");
+
+    /* erase all keys when master sends pairing req*/
+    if (p_dev_rec)
+        btm_sec_clear_ble_keys(p_dev_rec);
+    /* do not manipulate the key, let app decide,
+       leave out to BTM to mandate key distribution for bonding case */
+    smp_send_cmd(SMP_OPCODE_PAIRING_REQ, p_cb);
+}
+/*******************************************************************************
+** Function     smp_send_pair_rsp
+** Description  process pairing response to slave device
+*******************************************************************************/
+void smp_send_pair_rsp(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_send_pair_rsp  ");
+
+    p_cb->loc_i_key &= p_cb->peer_i_key;
+    p_cb->loc_r_key &= p_cb->peer_r_key;
+
+    if (smp_send_cmd (SMP_OPCODE_PAIRING_RSP, p_cb))
+    {
+        smp_decide_asso_model(p_cb, NULL);
+    }
+}
+
+/*******************************************************************************
+** Function     smp_send_pair_request
+** Description  process pairing request to slave device
+*******************************************************************************/
+void smp_send_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_send_confirm  ");
+    smp_send_cmd(SMP_OPCODE_CONFIRM, p_cb);
+}
+/*******************************************************************************
+** Function     smp_send_init
+** Description  process pairing initializer to slave device
+*******************************************************************************/
+void smp_send_init(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_send_init  ");
+
+#if SMP_CONFORMANCE_TESTING == TRUE
+    if (p_cb->enable_test_rand_val)
+    {
+        SMP_TRACE_DEBUG0 ("Use rand value from script");
+        memcpy(p_cb->rand, p_cb->test_rand, BT_OCTET16_LEN);
+    }
+#endif
+
+    smp_send_cmd(SMP_OPCODE_INIT, p_cb);
+}
+/*******************************************************************************
+** Function     smp_send_enc_info
+** Description  send security information command.
+*******************************************************************************/
+void smp_send_enc_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tBTM_LE_LENC_KEYS   le_key;
+
+    SMP_TRACE_DEBUG1 ("smp_send_enc_info  p_cb->loc_enc_size = %d", p_cb->loc_enc_size);
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_ENC, FALSE);
+
+    smp_send_cmd(SMP_OPCODE_ENCRYPT_INFO, p_cb);
+    smp_send_cmd(SMP_OPCODE_MASTER_ID, p_cb);
+
+    /* save the DIV and key size information when acting as slave device */
+    le_key.div =  p_cb->div;
+    le_key.key_size = p_cb->loc_enc_size;
+    le_key.sec_level = p_cb->sec_level;
+    btm_sec_save_le_key(p_cb->pairing_bda, BTM_LE_KEY_LENC, (tBTM_LE_KEY_VALUE *)&le_key, TRUE);
+
+    SMP_TRACE_WARNING0( "smp_send_enc_info");
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_send_id_info
+** Description  send ID information command.
+*******************************************************************************/
+void smp_send_id_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_send_id_info  ");
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_ID, FALSE);
+
+    smp_send_cmd(SMP_OPCODE_IDENTITY_INFO, p_cb);
+    smp_send_cmd(SMP_OPCODE_ID_ADDR, p_cb);
+
+    SMP_TRACE_WARNING0( "smp_send_id_info");
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_send_csrk_info
+** Description  send CSRK command.
+*******************************************************************************/
+void smp_send_csrk_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tBTM_LE_KEY_VALUE   key;
+    SMP_TRACE_DEBUG0 ("smp_send_csrk_info ");
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_CSRK, FALSE);
+
+    if (smp_send_cmd(SMP_OPCODE_SIGN_INFO, p_cb))
+    {
+        key.lcsrk_key.div = p_cb->div;
+        key.lcsrk_key.sec_level = p_cb->sec_level;
+        key.lcsrk_key.counter = 0; /* initialize the local counter */
+        btm_sec_save_le_key(p_cb->pairing_bda, BTM_LE_KEY_LCSRK, &key, TRUE);
+    }
+
+    smp_key_distribution(p_cb, NULL);
+}
+
+/*******************************************************************************
+** Function     smp_send_ltk_reply
+** Description  send LTK reply
+*******************************************************************************/
+void smp_send_ltk_reply(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_send_ltk_reply ");
+    /* send stk as LTK response */
+    btm_ble_ltk_request_reply(p_cb->pairing_bda, TRUE, p_data->key.p_data);
+}
+/*******************************************************************************
+** Function     smp_proc_sec_req
+** Description  process security request.
+*******************************************************************************/
+void smp_proc_sec_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tBTM_LE_AUTH_REQ        auth_req = *(tBTM_LE_AUTH_REQ *)p_data;
+    tBTM_BLE_SEC_REQ_ACT    sec_req_act;
+
+
+    SMP_TRACE_DEBUG1 ("smp_proc_sec_req  auth_req=0x%x",auth_req);
+
+    p_cb->cb_evt = 0;
+
+    btm_ble_link_sec_check(p_cb->pairing_bda, auth_req,  &sec_req_act);
+
+    SMP_TRACE_DEBUG1 ("smp_proc_sec_req  sec_req_act=0x%x",sec_req_act);
+
+    switch (sec_req_act)
+    {
+        case  BTM_BLE_SEC_REQ_ACT_ENCRYPT:
+            SMP_TRACE_DEBUG0 ("smp_proc_sec_req BTM_BLE_SEC_REQ_ACT_ENCRYPT");
+            smp_sm_event(p_cb, SMP_ENC_REQ_EVT, NULL);
+            break;
+
+        case BTM_BLE_SEC_REQ_ACT_PAIR:
+            /* initialize local i/r key to be default keys */
+            SMP_TRACE_DEBUG0 ("smp_proc_sec_req BTM_BLE_SEC_REQ_ACT_PAIR");
+            p_cb->peer_auth_req = auth_req;
+            p_cb->loc_r_key = p_cb->loc_i_key = SMP_SEC_DEFAULT_KEY ;
+            p_cb->cb_evt = SMP_SEC_REQUEST_EVT;
+            break;
+
+        case BTM_BLE_SEC_REQ_ACT_DISCARD:
+            p_cb->discard_sec_req = TRUE;
+            break;
+
+        default:
+            /* do nothing */
+            break;
+    }
+}
+/*******************************************************************************
+** Function     smp_proc_sec_grant
+** Description  process security grant.
+*******************************************************************************/
+void smp_proc_sec_grant(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 res= *(UINT8 *)p_data;
+    SMP_TRACE_DEBUG0 ("smp_proc_sec_grant ");
+    if (res != SMP_SUCCESS)
+    {
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, p_data);
+    }
+    else /*otherwise, start pairing */
+    {
+        /* send IO request callback */
+        p_cb->cb_evt = SMP_IO_CAP_REQ_EVT;
+    }
+}
+/*******************************************************************************
+** Function     smp_proc_pair_fail
+** Description  process pairing failure from peer device
+*******************************************************************************/
+void smp_proc_pair_fail(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_proc_pair_fail   ");
+    p_cb->status = *(UINT8 *)p_data;
+}
+/*******************************************************************************
+** Function     smp_proc_pair_cmd
+** Description  Process the SMP pairing request/response from peer device
+*******************************************************************************/
+void smp_proc_pair_cmd(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   *p = (UINT8 *)p_data;
+    UINT8   reason = SMP_ENC_KEY_SIZE;
+    tBTM_SEC_DEV_REC *p_dev_rec = btm_find_dev (p_cb->pairing_bda);
+
+    SMP_TRACE_DEBUG0 ("smp_proc_pair_cmd  ");
+    /* erase all keys if it is slave proc pairing req*/
+    if (p_dev_rec && (p_cb->role == HCI_ROLE_SLAVE))
+        btm_sec_clear_ble_keys(p_dev_rec);
+
+    p_cb->flags |= SMP_PAIR_FLAG_ENC_AFTER_PAIR;
+
+    STREAM_TO_UINT8(p_cb->peer_io_caps, p);
+    STREAM_TO_UINT8(p_cb->peer_oob_flag, p);
+    STREAM_TO_UINT8(p_cb->peer_auth_req, p);
+    STREAM_TO_UINT8(p_cb->peer_enc_size, p);
+    STREAM_TO_UINT8(p_cb->peer_i_key, p);
+    STREAM_TO_UINT8(p_cb->peer_r_key, p);
+
+#if SMP_CONFORMANCE_TESTING == TRUE
+    if (p_cb->enable_test_pair_fail)
+    {
+        SMP_TRACE_DEBUG0 ("Forced pair fair");
+        if (p_cb->peer_enc_size < SMP_MIN_ENC_KEY_SIZE)
+        {
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+        }
+        else
+        {
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &(p_cb->pair_fail_status));
+        }
+        return;
+    }
+#endif
+
+
+    if (p_cb->peer_enc_size < SMP_MIN_ENC_KEY_SIZE)
+    {
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+    }
+    else if (p_cb->role == HCI_ROLE_SLAVE)
+    {
+        if (!(p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD))
+        {
+            p_cb->loc_i_key = p_cb->peer_i_key;
+            p_cb->loc_r_key = p_cb->peer_r_key;
+        }
+        else /* update local i/r key according to pairing request */
+        {
+            p_cb->loc_i_key &= p_cb->peer_i_key;
+            p_cb->loc_r_key &= p_cb->peer_r_key;
+        }
+
+        p_cb->cb_evt = SMP_SEC_REQUEST_EVT;
+    }
+}
+/*******************************************************************************
+** Function     smp_proc_confirm
+** Description  process pairing confirm from peer device
+*******************************************************************************/
+void smp_proc_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 *p = (UINT8 *)p_data;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_confirm  ");
+    if (p != NULL)
+    {
+        /* save the SConfirm for comparison later */
+        STREAM_TO_ARRAY(p_cb->rconfirm, p, BT_OCTET16_LEN);
+    }
+
+    p_cb->flags |= SMP_PAIR_FLAGS_CMD_CONFIRM;
+}
+
+/*******************************************************************************
+** Function     smp_proc_init
+** Description  process pairing initializer from peer device
+*******************************************************************************/
+void smp_proc_init(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 *p = (UINT8 *)p_data;
+    SMP_TRACE_DEBUG0 ("smp_proc_init ");
+    /* save the SRand for comparison */
+    STREAM_TO_ARRAY(p_cb->rrand, p, BT_OCTET16_LEN);
+
+}
+/*******************************************************************************
+** Function     smp_proc_enc_info
+** Description  process encryption information from peer device
+*******************************************************************************/
+void smp_proc_enc_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   *p = (UINT8 *)p_data;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_enc_info  ");
+    STREAM_TO_ARRAY(p_cb->ltk, p, BT_OCTET16_LEN);
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_proc_master_id
+** Description  process master ID from slave device
+*******************************************************************************/
+void smp_proc_master_id(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   *p = (UINT8 *)p_data;
+    tBTM_LE_PENC_KEYS   le_key;
+
+    SMP_TRACE_DEBUG0 (" smp_proc_master_id");
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_ENC, TRUE);
+
+    STREAM_TO_UINT16(le_key.ediv, p);
+    STREAM_TO_ARRAY(le_key.rand, p, BT_OCTET8_LEN );
+
+    /* store the encryption keys from peer device */
+    memcpy(le_key.ltk, p_cb->ltk, BT_OCTET16_LEN);
+    le_key.sec_level = p_cb->sec_level;
+    le_key.key_size  = p_cb->loc_enc_size;
+    btm_sec_save_le_key(p_cb->pairing_bda, BTM_LE_KEY_PENC, (tBTM_LE_KEY_VALUE *)&le_key, TRUE);
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_proc_enc_info
+** Description  process identity information from peer device
+*******************************************************************************/
+void smp_proc_id_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   *p = (UINT8 *)p_data;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_id_info ");
+    STREAM_TO_ARRAY (p_cb->tk, p, BT_OCTET16_LEN);   /* reuse TK for IRK */
+    /* store the ID key from peer device */
+    btm_sec_save_le_key(p_cb->pairing_bda, BTM_LE_KEY_PID, (tBTM_LE_KEY_VALUE *)&p_cb->tk, TRUE);
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_proc_id_addr
+** Description  process identity address from peer device
+*******************************************************************************/
+void smp_proc_id_addr(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   *p = (UINT8 *)p_data;
+    BD_ADDR    mac_bda;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_id_addr  ");
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_ID, TRUE);
+
+    STREAM_TO_BDADDR(mac_bda, p);
+
+    /* TODO, update MAC address */
+
+    smp_key_distribution(p_cb, NULL);
+}
+/*******************************************************************************
+** Function     smp_proc_srk_info
+** Description  process security information from peer device
+*******************************************************************************/
+void smp_proc_srk_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    tBTM_LE_PCSRK_KEYS   le_key;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_srk_info ");
+    smp_update_key_mask (p_cb, SMP_SEC_KEY_TYPE_CSRK, TRUE);
+
+    /* save CSRK to security record */
+    le_key.sec_level = p_cb->sec_level;
+    memcpy (le_key.csrk, p_data, BT_OCTET16_LEN);   /* get peer CSRK */
+    le_key.counter = 0; /* initialize the peer counter */
+    btm_sec_save_le_key(p_cb->pairing_bda, BTM_LE_KEY_PCSRK, (tBTM_LE_KEY_VALUE *)&le_key, TRUE);
+
+    smp_key_distribution(p_cb, NULL);
+}
+
+/*******************************************************************************
+** Function     smp_proc_compare
+** Description  process compare value
+*******************************************************************************/
+void smp_proc_compare(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   reason;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_compare  ");
+    if (!memcmp(p_cb->rconfirm, p_data->key.p_data, BT_OCTET16_LEN))
+    {
+        /* compare the max encryption key size, and save the smaller one for the link */
+        if ( p_cb->peer_enc_size < p_cb->loc_enc_size)
+            p_cb->loc_enc_size = p_cb->peer_enc_size;
+
+        if (p_cb->role == HCI_ROLE_SLAVE)
+            smp_sm_event(p_cb, SMP_RAND_EVT, NULL);
+        else
+        {
+            /* master device always use received i/r key as keys to distribute */
+            p_cb->loc_i_key = p_cb->peer_i_key;
+            p_cb->loc_r_key = p_cb->peer_r_key;
+
+            smp_sm_event(p_cb, SMP_ENC_REQ_EVT, NULL);
+        }
+
+    }
+    else
+    {
+        reason = p_cb->failure = SMP_CONFIRM_VALUE_ERR;
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+    }
+}
+/*******************************************************************************
+** Function     smp_proc_sl_key
+** Description  process key ready events.
+*******************************************************************************/
+void smp_proc_sl_key(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 key_type = p_data->key.key_type;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_sl_keysmp_proc_sl_key  ");
+    if (key_type == SMP_KEY_TYPE_TK)
+    {
+        smp_generate_confirm(p_cb, NULL);
+    }
+    else if (key_type == SMP_KEY_TYPE_CFM)
+    {
+        smp_set_state(SMP_ST_WAIT_CONFIRM);
+
+        if (p_cb->flags & SMP_PAIR_FLAGS_CMD_CONFIRM)
+            smp_sm_event(p_cb, SMP_CONFIRM_EVT, NULL);
+
+    }
+}
+/*******************************************************************************
+** Function     smp_start_enc
+** Description  start encryption
+*******************************************************************************/
+void smp_start_enc(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BOOLEAN cmd;
+    UINT8 reason = SMP_ENC_FAIL;
+
+    SMP_TRACE_DEBUG0 ("smp_start_enc ");
+    if (p_data != NULL)
+        cmd = btm_ble_start_encrypt(p_cb->pairing_bda, TRUE, p_data->key.p_data);
+    else
+        cmd = btm_ble_start_encrypt(p_cb->pairing_bda, FALSE, NULL);
+
+    if (!cmd)
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+
+}
+
+/*******************************************************************************
+** Function     smp_proc_discard
+** Description   processing for discard security request
+*******************************************************************************/
+void smp_proc_discard(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_proc_discard ");
+    smp_cb_cleanup(p_cb);
+}
+/*******************************************************************************
+** Function     smp_proc_release_delay
+** Description  process the release delay request
+*******************************************************************************/
+void smp_proc_release_delay(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_proc_release_delay ");
+    btu_stop_timer (&p_cb->rsp_timer_ent);
+    btu_start_timer (&p_cb->rsp_timer_ent, BTU_TTYPE_SMP_PAIRING_CMD,
+                     SMP_WAIT_FOR_REL_DELAY_TOUT);
+}
+
+/*******************************************************************************
+** Function      smp_proc_release_delay_tout
+** Description   processing the release delay timeout
+*******************************************************************************/
+void smp_proc_release_delay_tout(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_proc_release_delay_tout ");
+    btu_stop_timer (&p_cb->rsp_timer_ent);
+    smp_proc_pairing_cmpl(p_cb);
+}
+
+
+/*******************************************************************************
+** Function     smp_enc_cmpl
+** Description   encryption success
+*******************************************************************************/
+void smp_enc_cmpl(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 enc_enable = *(UINT8 *)p_data;
+    UINT8 reason = enc_enable ? SMP_SUCCESS : SMP_ENC_FAIL;
+
+    SMP_TRACE_DEBUG0 ("smp_enc_cmpl ");
+    smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+}
+
+
+/*******************************************************************************
+** Function     smp_check_auth_req
+** Description  check authentication request
+*******************************************************************************/
+void smp_check_auth_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8 enc_enable = *(UINT8 *)p_data;
+    UINT8 reason = enc_enable ? SMP_SUCCESS : SMP_ENC_FAIL;
+
+    SMP_TRACE_DEBUG3 ("smp_check_auth_req enc_enable=%d i_keys=0x%x r_keys=0x%x (i-initiator r-responder)",
+                      enc_enable, p_cb->loc_i_key, p_cb->loc_r_key);
+    if (enc_enable == 1)
+    {
+        if (/*((p_cb->peer_auth_req & SMP_AUTH_BOND) ||
+             (p_cb->loc_auth_req & SMP_AUTH_BOND)) &&*/
+            (p_cb->loc_i_key || p_cb->loc_r_key))
+        {
+            smp_sm_event(p_cb, SMP_BOND_REQ_EVT, NULL);
+        }
+        else
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+    }
+    else if (enc_enable == 0)
+    {
+        /* if failed for encryption after pairing, send callback */
+        if (p_cb->flags & SMP_PAIR_FLAG_ENC_AFTER_PAIR)
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+        /* if enc failed for old security information */
+        /* if master device, clean up and abck to idle; slave device do nothing */
+        else if (p_cb->role == HCI_ROLE_MASTER)
+        {
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+        }
+    }
+}
+
+/*******************************************************************************
+** Function     smp_key_pick_key
+** Description  Pick a key distribution function based on the key mask.
+*******************************************************************************/
+void smp_key_pick_key(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   key_to_dist = (p_cb->role == HCI_ROLE_SLAVE) ? p_cb->loc_r_key : p_cb->loc_i_key;
+    UINT8   i = 0;
+
+    SMP_TRACE_DEBUG1 ("smp_key_pick_key key_to_dist=0x%x", key_to_dist);
+    while (i < 3)
+    {
+        SMP_TRACE_DEBUG2("key to send = %02x, i = %d",  key_to_dist, i);
+
+        if (key_to_dist & (1 << i))
+        {
+            SMP_TRACE_DEBUG1 ("smp_distribute_act[%d]", i);
+            (* smp_distribute_act[i])(p_cb, p_data);
+            break;
+        }
+        i ++;
+    }
+}
+/*******************************************************************************
+** Function     smp_key_distribution
+** Description  start key distribution if required.
+*******************************************************************************/
+void smp_key_distribution(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   reason = SMP_SUCCESS;
+    SMP_TRACE_DEBUG3 ("smp_key_distribution role=%d (0-master) r_keys=0x%x i_keys=0x%x",
+                      p_cb->role, p_cb->loc_r_key, p_cb->loc_i_key);
+
+    if (p_cb->role == HCI_ROLE_SLAVE||
+        (!p_cb->loc_r_key && p_cb->role == HCI_ROLE_MASTER))
+    {
+        smp_key_pick_key(p_cb, p_data);
+    }
+
+    if (!p_cb->loc_i_key && !p_cb->loc_r_key)
+    {
+        /* state check to prevent re-entrant */
+        if (smp_get_state() == SMP_ST_BOND_PENDING)
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &reason);
+    }
+}
+/*******************************************************************************
+** Function         smp_decide_asso_model
+** Description      This function is called to compare both sides' io capability
+**                  oob data flag and authentication request, and decide the
+**                  association model to use for the authentication.
+*******************************************************************************/
+void smp_decide_asso_model(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    UINT8   failure = SMP_UNKNOWN_IO_CAP;
+    tSMP_ASSO_MODEL model = SMP_MODEL_MAX;
+    UINT8 int_evt = 0;
+    tSMP_KEY key;
+    tSMP_INT_DATA   *p;
+
+    SMP_TRACE_DEBUG3 ("smp_decide_asso_model p_cb->peer_io_caps = %d p_cb->loc_io_caps = %d \
+                       p_cb->peer_auth_req = %02x",
+                       p_cb->peer_io_caps, p_cb->loc_io_caps, p_cb->peer_auth_req);
+
+    /* OOB data present on both devices, use OOB association model */
+    if (p_cb->peer_oob_flag == SMP_OOB_PRESENT && p_cb->loc_oob_flag == SMP_OOB_PRESENT)
+    {
+        model = SMP_MODEL_OOB;
+    }
+    /* no MITM required, ignore IO cap, use encryption only */
+    else if (SMP_NO_MITM_REQUIRED (p_cb->peer_auth_req) &&
+             SMP_NO_MITM_REQUIRED(p_cb->loc_auth_req))
+    {
+        model = SMP_MODEL_ENC_ONLY;
+    }
+    else/* use IO capability to decide assiciation model */
+    {
+        if (p_cb->peer_io_caps < SMP_IO_CAP_MAX && p_cb->loc_io_caps < SMP_IO_CAP_MAX)
+        {
+            if (p_cb->role == HCI_ROLE_MASTER)
+                model = smp_association_table[p_cb->role][p_cb->peer_io_caps][p_cb->loc_io_caps];
+            else
+                model = smp_association_table[p_cb->role][p_cb->loc_io_caps][p_cb->peer_io_caps];
+        }
+    }
+
+    SMP_TRACE_DEBUG1("Association Model = %d", model);
+
+    if (model == SMP_MODEL_OOB)
+    {
+        SMP_TRACE_ERROR0("Association Model = SMP_MODEL_OOB");
+        p_cb->sec_level = SMP_SEC_AUTHENTICATED;
+        SMP_TRACE_EVENT1 ("p_cb->sec_level =%d (SMP_SEC_AUTHENTICATED) ", p_cb->sec_level );
+        p_cb->cb_evt = SMP_OOB_REQ_EVT;
+
+        int_evt = SMP_TK_REQ_EVT;
+    }
+    else if (model == SMP_MODEL_PASSKEY)
+    {
+        p_cb->sec_level = SMP_SEC_AUTHENTICATED;
+        SMP_TRACE_EVENT1 ("p_cb->sec_level =%d (SMP_SEC_AUTHENTICATED) ", p_cb->sec_level );
+
+        p_cb->cb_evt = SMP_PASSKEY_REQ_EVT;
+        int_evt = SMP_TK_REQ_EVT;
+    }
+    else if (model == SMP_MODEL_KEY_NOTIF)
+    {
+        p_cb->sec_level = SMP_SEC_AUTHENTICATED;
+
+        SMP_TRACE_DEBUG0("Need to generate Passkey");
+        /* generate passkey and notify application */
+        smp_generate_passkey(p_cb, NULL);
+    }
+    else if (model == SMP_MODEL_ENC_ONLY) /* TK = 0, go calculate Confirm */
+    {
+        if (p_cb->role == HCI_ROLE_MASTER &&
+            ((p_cb->peer_auth_req & SMP_AUTH_YN_BIT) != 0) &&
+            ((p_cb->loc_auth_req & SMP_AUTH_YN_BIT) == 0))
+        {
+            SMP_TRACE_ERROR0("IO capability does not meet authentication requirement");
+            failure = SMP_PAIR_AUTH_FAIL;
+            p = (tSMP_INT_DATA *)&failure;
+            int_evt = SMP_AUTH_CMPL_EVT;
+        }
+        else
+        {
+            p_cb->sec_level = SMP_SEC_UNAUTHENTICATE;
+            SMP_TRACE_EVENT1 ("p_cb->sec_level =%d (SMP_SEC_UNAUTHENTICATE) ", p_cb->sec_level );
+
+            key.key_type = SMP_KEY_TYPE_TK;
+            key.p_data = p_cb->tk;
+            p = (tSMP_INT_DATA *)&key;
+
+            memset(p_cb->tk, 0, BT_OCTET16_LEN);
+            /* TK, ready  */
+            int_evt = SMP_KEY_READY_EVT;
+        }
+    }
+    else if (model == SMP_MODEL_MAX)
+    {
+        SMP_TRACE_ERROR0("Association Model = SMP_MODEL_MAX (failed)");
+        p = (tSMP_INT_DATA *)&failure;
+        int_evt = SMP_AUTH_CMPL_EVT;
+    }
+
+    SMP_TRACE_EVENT1 ("sec_level=%d ", p_cb->sec_level );
+    if (int_evt)
+        smp_sm_event(p_cb, int_evt, p);
+}
+
+/*******************************************************************************
+** Function     smp_proc_io_rsp
+** Description  process IO response for a slave device.
+*******************************************************************************/
+void smp_proc_io_rsp(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_proc_io_rsp ");
+    if (p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD)
+    {
+        smp_set_state(SMP_ST_SEC_REQ_PENDING);
+        smp_send_cmd(SMP_OPCODE_SEC_REQ, p_cb);
+    }
+    else /* respond to pairing request */
+    {
+        smp_send_pair_rsp(p_cb, NULL);
+    }
+}
+/*******************************************************************************
+** Function         smp_pairing_cmpl
+** Description      This function is called to send the pairing complete callback
+**                  and remove the connection if needed.
+*******************************************************************************/
+void smp_pairing_cmpl(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+
+    SMP_TRACE_DEBUG0 ("smp_pairing_cmpl ");
+
+    if ((p_cb->status == SMP_SUCCESS) ||
+        (p_cb->status <= SMP_REPEATED_ATTEMPTS && p_cb->status != SMP_SUCCESS))
+    {
+        smp_sm_event(p_cb, SMP_RELEASE_DELAY_EVT, p_data);
+    }
+    else
+    {
+        /* this will transition to idle state right away */
+        smp_sm_event(p_cb, SMP_RELEASE_DELAY_TOUT_EVT, p_data);
+    }
+
+}
+/*******************************************************************************
+** Function         smp_pair_terminate
+** Description      This function is called to send the pairing complete callback
+**                  and remove the connection if needed.
+*******************************************************************************/
+void smp_pair_terminate(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_pair_terminate ");
+    p_cb->status = SMP_PAIR_FAIL_UNKNOWN;
+    smp_proc_pairing_cmpl(p_cb);
+}
+/*******************************************************************************
+** Function         smp_idle_terminate
+** Description      This function calledin idle state to determine to send authentication
+**                  complete or not.
+*******************************************************************************/
+void smp_idle_terminate(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    if (p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD)
+    {
+        SMP_TRACE_DEBUG0("Pairing terminated at IDLE state.");
+        p_cb->status = SMP_FAIL;
+        smp_proc_pairing_cmpl(p_cb);
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_link_encrypted
+**
+** Description      This function is called when link is encrypted and notified to
+**                  slave device. Proceed to to send LTK, DIV and ER to master if
+**                  bonding the devices.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_link_encrypted(BD_ADDR bda, UINT8 encr_enable)
+{
+    tSMP_CB *p_cb = &smp_cb;
+
+    SMP_TRACE_DEBUG1 ("smp_link_encrypted encr_enable=%d",encr_enable);
+
+    if (memcmp(&smp_cb.pairing_bda[0], bda, BD_ADDR_LEN) == 0)
+    {
+        /* encryption completed with STK, remmeber the key size now, could be overwite
+        *  when key exchange happens                                        */
+        if (p_cb->loc_enc_size != 0 && encr_enable)
+        {
+            /* update the link encryption key size if a SMP pairing just performed */
+            btm_ble_update_sec_key_size(bda, p_cb->loc_enc_size);
+        }
+
+        smp_sm_event(&smp_cb, SMP_ENCRYPTED_EVT, &encr_enable);
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_proc_ltk_request
+**
+** Description      This function is called when LTK request is received from
+**                  controller.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN smp_proc_ltk_request(BD_ADDR bda)
+{
+    SMP_TRACE_DEBUG1 ("smp_proc_ltk_request state = %d", smp_cb.state);
+    if ( smp_cb.state == SMP_ST_ENC_PENDING &&
+         !memcmp(bda, smp_cb.pairing_bda, BD_ADDR_LEN))
+    {
+        smp_sm_event(&smp_cb, SMP_ENC_REQ_EVT, NULL);
+
+        return TRUE;
+    }
+
+    return FALSE;
+}
+#endif
+
diff --git a/stack/smp/smp_api.c b/stack/smp/smp_api.c
new file mode 100644
index 0000000..cfde2d4
--- /dev/null
+++ b/stack/smp/smp_api.c
@@ -0,0 +1,337 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the implementation of the SMP interface used by
+ *  applications that can run over an SMP.
+ *
+ ******************************************************************************/
+#include <string.h>
+
+#include "bt_target.h"
+#if SMP_INCLUDED == TRUE
+    #include "smp_int.h"
+    #include "smp_api.h"
+    #include "l2cdefs.h"
+    #include "l2c_int.h"
+    #include "btm_int.h"
+    #include "hcimsgs.h"
+
+    #include "btu.h"
+
+
+/*******************************************************************************
+**
+** Function         SMP_Init
+**
+** Description      This function initializes the SMP unit.
+**
+** Returns          void
+**
+*******************************************************************************/
+void SMP_Init(void)
+{
+
+    SMP_TRACE_EVENT0 ("SMP_Init");
+    memset(&smp_cb, 0, sizeof(tSMP_CB));
+
+#if defined(SMP_INITIAL_TRACE_LEVEL)
+    smp_cb.trace_level = SMP_INITIAL_TRACE_LEVEL;
+#else
+    smp_cb.trace_level = BT_TRACE_LEVEL_NONE;    /* No traces */
+#endif
+
+    smp_l2cap_if_init();
+}
+
+
+/*******************************************************************************
+**
+** Function         SMP_SetTraceLevel
+**
+** Description      This function sets the trace level for SMP.  If called with
+**                  a value of 0xFF, it simply returns the current trace level.
+**
+**                  Input Parameters:
+**                      level:  The level to set the GATT tracing to:
+**                      0xff-returns the current setting.
+**                      0-turns off tracing.
+**                      >= 1-Errors.
+**                      >= 2-Warnings.
+**                      >= 3-APIs.
+**                      >= 4-Events.
+**                      >= 5-Debug.
+**
+** Returns          The new or current trace level
+**
+*******************************************************************************/
+SMP_API extern UINT8 SMP_SetTraceLevel (UINT8 new_level)
+{
+    if (new_level != 0xFF)
+        smp_cb.trace_level = new_level;
+
+    return(smp_cb.trace_level);
+}
+
+
+/*******************************************************************************
+**
+** Function         SMP_Register
+**
+** Description      This function register for the SMP services callback.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN SMP_Register (tSMP_CALLBACK *p_cback)
+{
+    SMP_TRACE_EVENT1 ("SMP_Register state=%d", smp_cb.state);
+
+    if (smp_cb.p_callback != NULL)
+    {
+        SMP_TRACE_ERROR0 ("SMP_Register: duplicate registration, overwrite it");
+    }
+    smp_cb.p_callback = p_cback;
+
+    return(TRUE);
+
+}
+
+/*******************************************************************************
+**
+** Function         SMP_Pair
+**
+** Description      This function call to perform a SMP pairing with peer device.
+**                  Device support one SMP pairing at one time.
+**
+** Parameters       bd_addr - peer device bd address.
+**
+** Returns          None
+**
+*******************************************************************************/
+tSMP_STATUS SMP_Pair (BD_ADDR bd_addr)
+{
+    tSMP_CB   *p_cb = &smp_cb;
+    UINT8     status = SMP_PAIR_INTERNAL_ERR;
+
+    BTM_TRACE_EVENT2 ("SMP_Pair state=%d flag=0x%x ", p_cb->state, p_cb->flags);
+    if (p_cb->state != SMP_ST_IDLE || p_cb->flags & SMP_PAIR_FLAGS_WE_STARTED_DD)
+    {
+        /* pending security on going, reject this one */
+        return SMP_BUSY;
+    }
+    else
+    {
+        p_cb->flags = SMP_PAIR_FLAGS_WE_STARTED_DD;
+
+        memcpy (p_cb->pairing_bda, bd_addr, BD_ADDR_LEN);
+
+        if (!L2CA_ConnectFixedChnl (L2CAP_SMP_CID, bd_addr))
+        {
+            SMP_TRACE_ERROR0("SMP_Pair: L2C connect fixed channel failed.");
+            smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+            return status;
+        }
+
+        return SMP_STARTED;
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         SMP_PairCancel
+**
+** Description      This function call to cancel a SMP pairing with peer device.
+**
+** Parameters       bd_addr - peer device bd address.
+**
+** Returns          TRUE - Pairining is cancelled
+**
+*******************************************************************************/
+BOOLEAN SMP_PairCancel (BD_ADDR bd_addr)
+{
+    tSMP_CB   *p_cb = &smp_cb;
+    UINT8     err_code = SMP_PAIR_FAIL_UNKNOWN;
+    BOOLEAN   status = FALSE;
+
+    BTM_TRACE_EVENT2 ("SMP_CancelPair state=%d flag=0x%x ", p_cb->state, p_cb->flags);
+    if ( (p_cb->state != SMP_ST_IDLE)  &&
+         (!memcmp (p_cb->pairing_bda, bd_addr, BD_ADDR_LEN)) )
+    {
+        p_cb->is_pair_cancel = TRUE;
+        SMP_TRACE_DEBUG0("Cancel Pairing: set fail reason Unknown");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &err_code);
+        status = TRUE;
+    }
+
+    return status;
+}
+/*******************************************************************************
+**
+** Function         SMP_SecurityGrant
+**
+** Description      This function is called to grant security process.
+**
+** Parameters       bd_addr - peer device bd address.
+**                  res     - result of the operation SMP_SUCCESS if success.
+**                            Otherwise, SMP_REPEATED_ATTEMPTS is too many attempts.
+**
+** Returns          None
+**
+*******************************************************************************/
+void SMP_SecurityGrant(BD_ADDR bd_addr, UINT8 res)
+{
+    SMP_TRACE_EVENT0 ("SMP_SecurityGrant ");
+    if (smp_cb.state != SMP_ST_WAIT_APP_RSP ||
+        smp_cb.cb_evt != SMP_SEC_REQUEST_EVT ||
+        memcmp (smp_cb.pairing_bda, bd_addr, BD_ADDR_LEN))
+        return;
+
+    smp_sm_event(&smp_cb, SMP_API_SEC_GRANT_EVT, &res);
+}
+
+/*******************************************************************************
+**
+** Function         SMP_PasskeyReply
+**
+** Description      This function is called after Security Manager submitted
+**                  passkey request to the application.
+**
+** Parameters:      bd_addr      - Address of the device for which passkey was requested
+**                  res          - result of the operation SMP_SUCCESS if success
+**                  passkey - numeric value in the range of
+**                  BTM_MIN_PASSKEY_VAL(0) - BTM_MAX_PASSKEY_VAL(999999(0xF423F)).
+**
+*******************************************************************************/
+void SMP_PasskeyReply (BD_ADDR bd_addr, UINT8 res, UINT32 passkey)
+{
+    tSMP_CB *p_cb = & smp_cb;
+    UINT8   failure = SMP_PASSKEY_ENTRY_FAIL;
+    tBTM_SEC_DEV_REC *p_dev_rec;
+
+    SMP_TRACE_EVENT2 ("SMP_PasskeyReply: Key: %d  Result:%d",
+                      passkey, res);
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if (p_cb->cb_evt != SMP_PASSKEY_REQ_EVT)
+    {
+        SMP_TRACE_WARNING1 ("SMP_PasskeyReply() - Wrong State: %d", p_cb->state);
+        return;
+    }
+
+    if (memcmp (bd_addr, p_cb->pairing_bda, BD_ADDR_LEN) != 0)
+    {
+        SMP_TRACE_ERROR0 ("SMP_PasskeyReply() - Wrong BD Addr");
+        return;
+    }
+
+    if ((p_dev_rec = btm_find_dev (bd_addr)) == NULL)
+    {
+        SMP_TRACE_ERROR0 ("SMP_PasskeyReply() - no dev CB");
+        return;
+    }
+
+
+    if (passkey > BTM_MAX_PASSKEY_VAL || res != SMP_SUCCESS)
+    {
+        SMP_TRACE_WARNING1 ("SMP_PasskeyReply() - Wrong key len: %d or passkey entry fail", passkey);
+        /* send pairing failure */
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure);
+
+    }
+    else
+    {
+        smp_convert_string_to_tk(p_cb->tk, passkey);
+    }
+
+    return;
+}
+
+/*******************************************************************************
+**
+** Function         SMP_OobDataReply
+**
+** Description      This function is called to provide the OOB data for
+**                  SMP in response to SMP_OOB_REQ_EVT
+**
+** Parameters:      bd_addr     - Address of the peer device
+**                  res         - result of the operation SMP_SUCCESS if success
+**                  p_data      - simple pairing Randomizer  C.
+**
+*******************************************************************************/
+void SMP_OobDataReply(BD_ADDR bd_addr, tSMP_STATUS res, UINT8 len, UINT8 *p_data)
+{
+    tSMP_CB *p_cb = & smp_cb;
+    UINT8   failure = SMP_OOB_FAIL;
+    tSMP_KEY        key;
+
+    SMP_TRACE_EVENT2 ("SMP_OobDataReply State: %d  res:%d",
+                      smp_cb.state, res);
+
+    /* If timeout already expired or has been canceled, ignore the reply */
+    if (p_cb->state != SMP_ST_WAIT_APP_RSP || p_cb->cb_evt != SMP_OOB_REQ_EVT)
+        return;
+
+    if (res != SMP_SUCCESS || len == 0 || !p_data)
+    {
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure);
+    }
+    else
+    {
+        if (len > BT_OCTET16_LEN)
+            len = BT_OCTET16_LEN;
+
+        memcpy(p_cb->tk, p_data, len);
+
+        key.key_type    = SMP_KEY_TYPE_TK;
+        key.p_data      = p_cb->tk;
+
+        smp_sm_event(&smp_cb, SMP_KEY_READY_EVT, &key);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         SMP_Encrypt
+**
+** Description      This function is called to encrypt the data with the specified
+**                  key
+**
+** Parameters:      key                 - Pointer to key key[0] conatins the MSB
+**                  key_len             - key length
+**                  plain_text          - Pointer to data to be encrypted
+**                                        plain_text[0] conatins the MSB
+**                  pt_len              - plain text length
+**                  p_out                - output of the encrypted texts
+**
+**  Returns         Boolean - request is successful
+*******************************************************************************/
+BOOLEAN SMP_Encrypt (UINT8 *key, UINT8 key_len,
+                     UINT8 *plain_text, UINT8 pt_len,
+                     tSMP_ENC *p_out)
+
+{
+    BOOLEAN status=FALSE;
+    status = smp_encrypt_data(key, key_len, plain_text, pt_len, p_out);
+    return status;
+}
+#endif /* SMP_INCLUDED */
+
+
diff --git a/stack/smp/smp_cmac.c b/stack/smp/smp_cmac.c
new file mode 100644
index 0000000..44e776e
--- /dev/null
+++ b/stack/smp/smp_cmac.c
@@ -0,0 +1,388 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the implementation of the AES128 CMAC algorithm.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+    #include <stdio.h>
+    #include <string.h>
+
+    #include "btm_ble_api.h"
+    #include "smp_int.h"
+    #include "hcimsgs.h"
+
+typedef struct
+{
+    UINT8               *text;
+    UINT16              len;
+    UINT16              round;
+}tCMAC_CB;
+
+tCMAC_CB    cmac_cb;
+
+/* Rb for AES-128 as block cipher, LSB as [0] */
+BT_OCTET16 const_Rb = {
+    0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+};
+
+void print128(BT_OCTET16 x, const UINT8 *key_name)
+{
+#if SMP_DEBUG == TRUE
+    UINT8  *p = (UINT8 *)x;
+    UINT8  i;
+
+    SMP_TRACE_WARNING1("%s(MSB ~ LSB) = ", key_name);
+
+    for (i = 0; i < 4; i ++)
+    {
+        SMP_TRACE_WARNING4("%02x %02x %02x %02x",
+                           p[BT_OCTET16_LEN - i*4 -1], p[BT_OCTET16_LEN - i*4 -2],
+                           p[BT_OCTET16_LEN - i*4 -3], p[BT_OCTET16_LEN - i*4 -4]);
+    }
+#endif
+}
+
+/*******************************************************************************
+**
+** Function         padding
+**
+** Description      utility function to padding the given text to be a 128 bits
+**                  data. The parameter dest is input and output parameter, it
+**                  must point to a BT_OCTET16_LEN memory space; where include
+**                  length bytes valid data.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void padding ( BT_OCTET16 dest, UINT8 length )
+{
+    UINT8   i, *p = dest;
+    /* original last block */
+    for ( i = length ; i < BT_OCTET16_LEN; i++ )
+        p[BT_OCTET16_LEN - i - 1] = ( i == length ) ? 0x80 : 0;
+}
+/*******************************************************************************
+**
+** Function         leftshift_onebit
+**
+** Description      utility function to left shift one bit for a 128 bits value.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void leftshift_onebit(UINT8 *input, UINT8 *output)
+{
+    UINT8   i, overflow = 0 , next_overflow = 0;
+    SMP_TRACE_EVENT0 ("leftshift_onebit ");
+    /* input[0] is LSB */
+    for ( i = 0; i < BT_OCTET16_LEN ; i ++ )
+    {
+        next_overflow = (input[i] & 0x80) ? 1:0;
+        output[i] = (input[i] << 1) | overflow;
+        overflow = next_overflow;
+    }
+    return;
+}
+/*******************************************************************************
+**
+** Function         cmac_aes_cleanup
+**
+** Description      clean up function for AES_CMAC algorithm.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void cmac_aes_cleanup(void)
+{
+    if (cmac_cb.text != NULL)
+    {
+        GKI_freebuf(cmac_cb.text);
+    }
+    memset(&cmac_cb, 0, sizeof(tCMAC_CB));
+}
+
+/*******************************************************************************
+**
+** Function         cmac_aes_k_calculate
+**
+** Description      This function is the calculation of block cipher using AES-128.
+**
+** Returns          void
+**
+*******************************************************************************/
+static BOOLEAN cmac_aes_k_calculate(BT_OCTET16 key, UINT8 *p_signature, UINT16 tlen)
+{
+    tSMP_ENC output;
+    UINT8    i = 1, err = 0;
+    UINT8    x[16] = {0};
+    UINT8   *p_mac;
+
+    SMP_TRACE_EVENT0 ("cmac_aes_k_calculate ");
+
+    while (i <= cmac_cb.round)
+    {
+        smp_xor_128(&cmac_cb.text[(cmac_cb.round - i)*BT_OCTET16_LEN], x); /* Mi' := Mi (+) X  */
+
+        if (!SMP_Encrypt(key, BT_OCTET16_LEN, &cmac_cb.text[(cmac_cb.round - i)*BT_OCTET16_LEN], BT_OCTET16_LEN, &output))
+        {
+            err = 1;
+            break;
+        }
+
+        memcpy(x, output.param_buf, BT_OCTET16_LEN);
+        i ++;
+    }
+
+    if (!err)
+    {
+        p_mac = output.param_buf + (BT_OCTET16_LEN - tlen);
+        memcpy(p_signature, p_mac, tlen);
+
+        SMP_TRACE_DEBUG2("tlen = %d p_mac = %d", tlen, p_mac);
+        SMP_TRACE_DEBUG4("p_mac[0] = 0x%02x p_mac[1] = 0x%02x p_mac[2] = 0x%02x p_mac[3] = 0x%02x",
+                         *p_mac, *(p_mac + 1), *(p_mac + 2), *(p_mac + 3));
+        SMP_TRACE_DEBUG4("p_mac[4] = 0x%02x p_mac[5] = 0x%02x p_mac[6] = 0x%02x p_mac[7] = 0x%02x",
+                         *(p_mac + 4), *(p_mac + 5), *(p_mac + 6), *(p_mac + 7));
+
+        return TRUE;
+
+    }
+    else
+        return FALSE;
+}
+/*******************************************************************************
+**
+** Function         cmac_prepare_last_block
+**
+** Description      This function proceeed to prepare the last block of message
+**                  Mn depending on the size of the message.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void cmac_prepare_last_block (BT_OCTET16 k1, BT_OCTET16 k2)
+{
+//    UINT8       x[16] = {0};
+    BOOLEAN      flag;
+
+    SMP_TRACE_EVENT0 ("cmac_prepare_last_block ");
+    /* last block is a complete block set flag to 1 */
+    flag = ((cmac_cb.len % BT_OCTET16_LEN) == 0 && cmac_cb.len != 0)  ? TRUE : FALSE;
+
+    SMP_TRACE_WARNING2("flag = %d round = %d", flag, cmac_cb.round);
+
+    if ( flag )
+    { /* last block is complete block */
+        smp_xor_128(&cmac_cb.text[0], k1);
+    }
+    else /* padding then xor with k2 */
+    {
+        padding(&cmac_cb.text[0], (UINT8)(cmac_cb.len % 16));
+
+        smp_xor_128(&cmac_cb.text[0], k2);
+    }
+}
+/*******************************************************************************
+**
+** Function         cmac_subkey_cont
+**
+** Description      This is the callback function when CIPHk(0[128]) is completed.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void cmac_subkey_cont(tSMP_ENC *p)
+{
+    UINT8 k1[BT_OCTET16_LEN], k2[BT_OCTET16_LEN];
+    UINT8 *pp = p->param_buf;
+    SMP_TRACE_EVENT0 ("cmac_subkey_cont ");
+    print128(pp, (const UINT8 *)"K1 before shift");
+
+    /* If MSB(L) = 0, then K1 = L << 1 */
+    if ( (pp[BT_OCTET16_LEN - 1] & 0x80) != 0 )
+    {
+        /* Else K1 = ( L << 1 ) (+) Rb */
+        leftshift_onebit(pp, k1);
+        smp_xor_128(k1, const_Rb);
+    }
+    else
+    {
+        leftshift_onebit(pp, k1);
+    }
+
+    if ( (k1[BT_OCTET16_LEN - 1] & 0x80) != 0 )
+    {
+        /* K2 =  (K1 << 1) (+) Rb */
+        leftshift_onebit(k1, k2);
+        smp_xor_128(k2, const_Rb);
+    }
+    else
+    {
+        /* If MSB(K1) = 0, then K2 = K1 << 1 */
+        leftshift_onebit(k1, k2);
+    }
+
+    print128(k1, (const UINT8 *)"K1");
+    print128(k2, (const UINT8 *)"K2");
+
+    cmac_prepare_last_block (k1, k2);
+}
+/*******************************************************************************
+**
+** Function         cmac_generate_subkey
+**
+** Description      This is the function to generate the two subkeys.
+**
+** Parameters       key - CMAC key, expect SRK when used by SMP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static BOOLEAN cmac_generate_subkey(BT_OCTET16 key)
+{
+    BT_OCTET16 z = {0};
+    BOOLEAN     ret = TRUE;
+    tSMP_ENC output;
+    SMP_TRACE_EVENT0 (" cmac_generate_subkey");
+
+    if (SMP_Encrypt(key, BT_OCTET16_LEN, z, BT_OCTET16_LEN, &output))
+    {
+        cmac_subkey_cont(&output);;
+    }
+    else
+        ret = FALSE;
+
+    return ret;
+}
+/*******************************************************************************
+**
+** Function         AES_CMAC
+**
+** Description      This is the AES-CMAC Generation Function with tlen implemented.
+**
+** Parameters       key - CMAC key in little endian order, expect SRK when used by SMP.
+**                  input - text to be signed in little endian byte order.
+**                  length - length of the input in byte.
+**                  tlen - lenth of mac desired
+**                  p_signature - data pointer to where signed data to be stored, tlen long.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN AES_CMAC ( BT_OCTET16 key, UINT8 *input, UINT16 length,
+                UINT16 tlen, UINT8 *p_signature)
+{
+    UINT16  len, diff;
+    UINT16  n = (length + BT_OCTET16_LEN - 1) / BT_OCTET16_LEN;       /* n is number of rounds */
+    BOOLEAN ret = FALSE;
+
+    SMP_TRACE_EVENT0 ("AES_CMAC  ");
+
+    if (n == 0)  n = 1;
+    len = n * BT_OCTET16_LEN;
+
+    SMP_TRACE_WARNING1("AES128_CMAC started, allocate buffer size = %d", len);
+    /* allocate a memory space of multiple of 16 bytes to hold text  */
+    if ((cmac_cb.text = (UINT8 *)GKI_getbuf(len)) != NULL)
+    {
+        cmac_cb.round = n;
+
+        memset(cmac_cb.text, 0, len);
+        diff = len - length;
+
+        if (input != NULL && length > 0)
+        {
+            memcpy(&cmac_cb.text[diff] , input, (int)length);
+            cmac_cb.len = length;
+        }
+        else
+            cmac_cb.len = 0;
+
+        /* prepare calculation for subkey s and last block of data */
+        if (cmac_generate_subkey(key))
+        {
+            /* start calculation */
+            ret = cmac_aes_k_calculate(key, p_signature, tlen);
+        }
+        /* clean up */
+        cmac_aes_cleanup();
+    }
+    else
+    {
+        ret = FALSE;
+        SMP_TRACE_ERROR0("No resources");
+    }
+
+    return ret;
+}
+
+    #if 0 /* testing code, sample data from spec */
+void test_cmac_cback(UINT8 *p_mac, UINT16 tlen)
+{
+    SMP_TRACE_EVENT0 ("test_cmac_cback ");
+    SMP_TRACE_ERROR0("test_cmac_cback");
+}
+
+void test_cmac(void)
+{
+    SMP_TRACE_EVENT0 ("test_cmac ");
+    UINT8 M[64] = {
+        0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96,
+        0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a,
+        0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c,
+        0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51,
+        0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11,
+        0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef,
+        0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17,
+        0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10
+    };
+
+    UINT8 key[16] = {
+        0x3c, 0x4f, 0xcf, 0x09, 0x88, 0x15, 0xf7, 0xab,
+        0xa6, 0xd2, 0xae, 0x28, 0x16, 0x15, 0x7e, 0x2b
+    };
+    UINT8 i =0, tmp;
+    UINT16 len;
+
+    len = 64;
+
+    for (i = 0; i < len/2; i ++)
+    {
+        tmp = M[i];
+        M[i] = M[len -1 - i];
+        M[len -1 - i] = tmp;
+    }
+
+
+    memset(&cmac_cb, 0, sizeof(tCMAC_CB));
+
+    SMP_TRACE_WARNING1("\n Example 1: len = %d\n", len);
+
+    AES_CMAC(key, M, len, 128, test_cmac_cback, 0);
+
+}
+    #endif
+#endif
+
diff --git a/stack/smp/smp_int.h b/stack/smp/smp_int.h
new file mode 100644
index 0000000..9eb2f10
--- /dev/null
+++ b/stack/smp/smp_int.h
@@ -0,0 +1,315 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains internally used SMP definitions
+ *
+ ******************************************************************************/
+
+#ifndef  SMP_INT_H
+#define  SMP_INT_H
+
+#include "btu.h"
+#include "smp_api.h"
+
+#define SMP_MODEL_ENC_ONLY  0
+#define SMP_MODEL_PASSKEY   1
+#define SMP_MODEL_OOB       2
+#define SMP_MODEL_KEY_NOTIF 3
+#define SMP_MODEL_MAX       4
+typedef UINT8   tSMP_ASSO_MODEL;
+
+
+#ifndef SMP_MAX_CONN
+    #define SMP_MAX_CONN    2
+#endif
+
+#define SMP_WAIT_FOR_RSP_TOUT			30
+#define SMP_WAIT_FOR_REL_DELAY_TOUT     5
+/* SMP L2CAP command code */
+#define SMP_OPCODE_PAIRING_REQ            0x01
+#define SMP_OPCODE_PAIRING_RSP            0x02
+#define SMP_OPCODE_CONFIRM                0x03
+#define SMP_OPCODE_INIT                   0x04
+#define SMP_OPCODE_PAIRING_FAILED         0x05
+#define SMP_OPCODE_ENCRYPT_INFO           0x06
+#define SMP_OPCODE_MASTER_ID              0x07
+#define SMP_OPCODE_IDENTITY_INFO          0x08
+#define SMP_OPCODE_ID_ADDR                0x09
+#define SMP_OPCODE_SIGN_INFO              0x0A
+#define SMP_OPCODE_SEC_REQ                0x0B
+#define SMP_OPCODE_MAX                    (SMP_OPCODE_SEC_REQ + 1)
+
+/* SMP events */
+#define SMP_PAIRING_REQ_EVT             SMP_OPCODE_PAIRING_REQ
+#define SMP_PAIRING_RSP_EVT             SMP_OPCODE_PAIRING_RSP
+#define SMP_CONFIRM_EVT                 SMP_OPCODE_CONFIRM
+#define SMP_RAND_EVT                    SMP_OPCODE_INIT
+#define SMP_PAIRING_FAILED_EVT          SMP_OPCODE_PAIRING_FAILED
+#define SMP_ENCRPTION_INFO_EVT          SMP_OPCODE_ENCRYPT_INFO
+#define SMP_MASTER_ID_EVT               SMP_OPCODE_MASTER_ID
+#define SMP_ID_INFO_EVT                 SMP_OPCODE_IDENTITY_INFO
+#define SMP_ID_ADDR_EVT                 SMP_OPCODE_ID_ADDR
+#define SMP_SIGN_INFO_EVT               SMP_OPCODE_SIGN_INFO
+#define SMP_SECURITY_REQ_EVT            SMP_OPCODE_SEC_REQ
+
+#define SMP_SELF_DEF_EVT                SMP_SECURITY_REQ_EVT
+#define SMP_KEY_READY_EVT               (SMP_SELF_DEF_EVT + 1)
+#define SMP_ENCRYPTED_EVT               (SMP_SELF_DEF_EVT + 2)
+#define SMP_L2CAP_CONN_EVT              (SMP_SELF_DEF_EVT + 3)
+#define SMP_L2CAP_DISCONN_EVT           (SMP_SELF_DEF_EVT + 4)
+#define SMP_IO_RSP_EVT                  (SMP_SELF_DEF_EVT + 5)
+#define SMP_API_SEC_GRANT_EVT           (SMP_SELF_DEF_EVT + 6)
+#define SMP_TK_REQ_EVT                  (SMP_SELF_DEF_EVT + 7)
+#define SMP_AUTH_CMPL_EVT               (SMP_SELF_DEF_EVT + 8)
+#define SMP_ENC_REQ_EVT                 (SMP_SELF_DEF_EVT + 9)
+#define SMP_BOND_REQ_EVT                (SMP_SELF_DEF_EVT + 10)
+#define SMP_DISCARD_SEC_REQ_EVT         (SMP_SELF_DEF_EVT + 11)
+#define SMP_RELEASE_DELAY_EVT           (SMP_SELF_DEF_EVT + 12)
+#define SMP_RELEASE_DELAY_TOUT_EVT      (SMP_SELF_DEF_EVT + 13)
+typedef UINT8 tSMP_EVENT;
+#define SMP_MAX_EVT         SMP_RELEASE_DELAY_TOUT_EVT + 1
+
+/* auumption it's only using the low 8 bits, if bigger than that, need to expand it to be 16 bits */
+#define SMP_SEC_KEY_MASK                    0x00ff
+
+/* SMP pairing state */
+enum
+{
+    SMP_ST_IDLE,
+    SMP_ST_WAIT_APP_RSP,
+    SMP_ST_SEC_REQ_PENDING,
+    SMP_ST_PAIR_REQ_RSP,
+    SMP_ST_WAIT_CONFIRM,
+    SMP_ST_CONFIRM,
+    SMP_ST_RAND,
+    SMP_ST_ENC_PENDING,
+    SMP_ST_BOND_PENDING,
+    SMP_ST_RELEASE_DELAY,
+    SMP_ST_MAX
+};
+typedef UINT8 tSMP_STATE;
+
+/* random and encrption activity state */
+enum
+{
+    SMP_GEN_COMPARE = 1,
+    SMP_GEN_CONFIRM,
+
+    SMP_GEN_DIV_LTK,
+    SMP_GEN_DIV_CSRK,
+    SMP_GEN_RAND_V,
+    SMP_GEN_TK,
+    SMP_GEN_SRAND_MRAND,
+    SMP_GEN_SRAND_MRAND_CONT
+};
+
+enum
+{
+    SMP_KEY_TYPE_TK,
+    SMP_KEY_TYPE_CFM,
+    SMP_KEY_TYPE_CMP,
+    SMP_KEY_TYPE_STK,
+    SMP_KEY_TYPE_LTK
+};
+typedef struct
+{
+    UINT8   key_type;
+    UINT8*  p_data;
+}tSMP_KEY;
+
+typedef union
+{
+    UINT8       *p_data;    /* UINT8 type data pointer */
+    tSMP_KEY    key;
+    UINT16      reason;
+}tSMP_INT_DATA;
+
+/* internal status mask */
+#define SMP_PAIR_FLAGS_WE_STARTED_DD           (1)
+#define SMP_PAIR_FLAGS_PEER_STARTED_DD         (1 << 1)
+#define SMP_PAIR_FLAGS_CMD_CONFIRM             (1 << SMP_OPCODE_CONFIRM) /* 1 << 3 */
+#define SMP_PAIR_FLAG_ENC_AFTER_PAIR           (1 << 4)
+
+/* check if authentication requirement need MITM protection */
+#define SMP_NO_MITM_REQUIRED(x)  (((x) & SMP_AUTH_YN_BIT) == 0)
+
+#define SMP_ENCRYT_KEY_SIZE                16
+#define SMP_ENCRYT_DATA_SIZE               16
+#define SMP_ECNCRPYT_STATUS                HCI_SUCCESS
+
+/* SMP control block */
+typedef struct
+{
+    tSMP_CALLBACK   *p_callback;
+    TIMER_LIST_ENT  rsp_timer_ent;
+    UINT8           trace_level;
+
+    BD_ADDR         pairing_bda;
+
+    tSMP_STATE      state;
+    UINT8           failure;
+    UINT8           status;
+    UINT8           role;
+    UINT8           flags;
+    UINT8           cb_evt;
+
+    tSMP_SEC_LEVEL  sec_level;
+    BOOLEAN         connect_initialized;
+    BT_OCTET16      confirm;
+    BT_OCTET16      rconfirm;
+    BT_OCTET16      rrand;
+    BT_OCTET16      rand;
+    tSMP_IO_CAP     peer_io_caps;
+    tSMP_IO_CAP     loc_io_caps;
+    tSMP_OOB_FLAG   peer_oob_flag;
+    tSMP_OOB_FLAG   loc_oob_flag;
+    tSMP_AUTH_REQ   peer_auth_req;
+    tSMP_AUTH_REQ   loc_auth_req;
+    UINT8           peer_enc_size;
+    UINT8           loc_enc_size;
+    UINT8           peer_i_key;
+    UINT8           peer_r_key;
+    UINT8           loc_i_key;
+    UINT8           loc_r_key;
+
+    BT_OCTET16      tk;
+    BT_OCTET16      ltk;
+    UINT16          div;
+    BT_OCTET16      csrk;  /* storage for local CSRK */
+    UINT16          ediv;
+    BT_OCTET8       enc_rand;
+
+    UINT8           rand_enc_proc;
+    BOOLEAN         last_cmd;
+    BD_ADDR         local_bda;
+    BOOLEAN         is_pair_cancel;
+    BOOLEAN         discard_sec_req;
+#if SMP_CONFORMANCE_TESTING == TRUE
+    BOOLEAN         enable_test_confirm_val;
+    BT_OCTET16      test_confirm;
+    BOOLEAN         enable_test_rand_val;
+    BT_OCTET16      test_rand;
+    BOOLEAN         enable_test_pair_fail;
+    UINT8           pair_fail_status;
+    BOOLEAN         remove_fixed_channel_disable;
+#endif
+
+}tSMP_CB;
+
+/* Server Action functions are of this type */
+typedef void (*tSMP_ACT)(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#if SMP_DYNAMIC_MEMORY == FALSE
+    SMP_API extern tSMP_CB  smp_cb;
+#else
+    SMP_API extern tSMP_CB *smp_cb_ptr;
+#define smp_cb (*smp_cb_ptr)
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/* Functions provided by att_main.c */
+SMP_API extern void smp_init (void);
+
+#if SMP_CONFORMANCE_TESTING == TRUE
+/* Used only for conformance testing */
+SMP_API extern void  smp_set_test_confirm_value (BOOLEAN enable, UINT8 *p_c_value);
+SMP_API extern void  smp_set_test_rand_value (BOOLEAN enable, UINT8 *p_c_value);
+SMP_API extern void  smp_set_test_pair_fail_status (BOOLEAN enable, UINT8 status);
+SMP_API extern void  smp_remove_fixed_channel_disable (BOOLEAN disable);
+#endif
+/* smp main */
+extern void smp_sm_event(tSMP_CB *p_cb, tSMP_EVENT event, void *p_data);
+
+extern void smp_proc_sec_request(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_pair_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_pair_fail(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_init(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_sec_request(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_pair_fail(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_init(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_enc_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_master_id(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_id_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_id_addr(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_sec_grant(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_sec_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_sl_key(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_start_enc(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_enc_cmpl(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_discard(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_release_delay(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_release_delay_tout(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_pairing_cmpl(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_decide_asso_model(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_app_cback(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_compare(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_check_auth_req(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_io_rsp(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_id_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_enc_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_csrk_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_ltk_reply(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_pair_cmd(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_pair_terminate(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_idle_terminate(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_send_pair_rsp(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_key_distribution(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_proc_srk_info(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_generate_csrk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+/* smp_l2c */
+extern void smp_l2cap_if_init (void);
+
+/* smp utility */
+extern BOOLEAN smp_send_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+extern void smp_cb_cleanup(tSMP_CB *p_cb);
+extern void smp_reset_control_value(tSMP_CB *p_cb);
+extern void smp_proc_pairing_cmpl(tSMP_CB *p_cb);
+extern void smp_convert_string_to_tk(BT_OCTET16 tk, UINT32 passkey);
+extern void smp_mask_enc_key(UINT8 loc_enc_size, UINT8 * p_data);
+extern void smp_rsp_timeout(TIMER_LIST_ENT *p_tle);
+extern void smp_xor_128(BT_OCTET16 a, BT_OCTET16 b);
+extern BOOLEAN smp_encrypt_data (UINT8 *key, UINT8 key_len,
+                                 UINT8 *plain_text, UINT8 pt_len,
+                                 tSMP_ENC *p_out);
+/* smp key */
+extern void smp_generate_confirm (tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_generate_compare (tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_generate_stk (tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_generate_ltk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_generate_passkey (tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+extern void smp_genenrate_rand_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+
+/* smp main util */
+extern void smp_set_state(tSMP_STATE state);
+extern tSMP_STATE smp_get_state(void);
+
+#endif /* SMP_INT_H */
+
diff --git a/stack/smp/smp_keys.c b/stack/smp/smp_keys.c
new file mode 100644
index 0000000..c61b548
--- /dev/null
+++ b/stack/smp/smp_keys.c
@@ -0,0 +1,909 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2008-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains the implementation of the SMP utility functions used
+ *  by SMP.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+    #if SMP_DEBUG == TRUE
+        #include <stdio.h>
+    #endif
+    #include <string.h>
+
+    #include "btm_ble_api.h"
+    #include "smp_int.h"
+    #include "btm_int.h"
+    #include "btm_ble_int.h"
+    #include "hcimsgs.h"
+    #include "aes.h"
+    #ifndef SMP_MAX_ENC_REPEAT
+        #define SMP_MAX_ENC_REPEAT      3
+    #endif
+
+static void smp_rand_back(tBTM_RAND_ENC *p);
+static void smp_genenrate_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+static void smp_genenrate_ltk_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data);
+static void smp_generate_y(tSMP_CB *p_cb, tSMP_INT_DATA *p);
+static void smp_generate_rand_vector (tSMP_CB *p_cb, tSMP_INT_DATA *p);
+static void smp_process_stk(tSMP_CB *p_cb, tSMP_ENC *p);
+static void smp_calculate_comfirm_cont(tSMP_CB *p_cb, tSMP_ENC *p);
+static void smp_process_confirm(tSMP_CB *p_cb, tSMP_ENC *p);
+static void smp_process_compare(tSMP_CB *p_cb, tSMP_ENC *p);
+static void smp_process_ediv(tSMP_CB *p_cb, tSMP_ENC *p);
+
+static const tSMP_ACT smp_encrypt_action[] =
+{
+    smp_generate_compare,           /* SMP_GEN_COMPARE */
+    smp_genenrate_confirm,          /* SMP_GEN_CONFIRM*/
+    smp_generate_stk,               /* SMP_GEN_STK*/
+    smp_genenrate_ltk_cont,          /* SMP_GEN_LTK */
+    smp_generate_ltk,               /* SMP_GEN_DIV_LTK */
+    smp_generate_rand_vector,        /* SMP_GEN_RAND_V */
+    smp_generate_y,                  /* SMP_GEN_EDIV */
+    smp_generate_passkey,           /* SMP_GEN_TK */
+    smp_generate_confirm,           /* SMP_GEN_SRAND_MRAND */
+    smp_genenrate_rand_cont         /* SMP_GEN_SRAND_MRAND_CONT */
+};
+
+
+    #define SMP_PASSKEY_MASK    0xfff00000
+
+    #if SMP_DEBUG == TRUE
+static void smp_debug_print_nbyte_little_endian (UINT8 *p, const UINT8 *key_name, UINT8 len)
+{
+    int     i, x = 0;
+    UINT8   p_buf[100];
+    memset(p_buf, 0, 100);
+
+    for (i = 0; i < len; i ++)
+    {
+        x += sprintf ((char *)&p_buf[x], "%02x ", p[i]);
+    }
+    SMP_TRACE_WARNING2("%s(LSB ~ MSB) = %s", key_name, p_buf);
+}
+    #else
+        #define smp_debug_print_nbyte_little_endian(p, key_name, len)
+    #endif
+
+/*******************************************************************************
+**
+** Function         smp_encrypt_data
+**
+** Description      This function is called to generate passkey.
+**
+** Returns          void
+**
+*******************************************************************************/
+BOOLEAN smp_encrypt_data (UINT8 *key, UINT8 key_len,
+                          UINT8 *plain_text, UINT8 pt_len,
+                          tSMP_ENC *p_out)
+{
+    aes_context     ctx;
+    UINT8           *p_start = NULL;
+    UINT8           *p = NULL;
+    UINT8           *p_rev_data = NULL;    /* input data in big endilan format */
+    UINT8           *p_rev_key = NULL;     /* input key in big endilan format */
+    UINT8           *p_rev_output = NULL;  /* encrypted output in big endilan format */
+
+    SMP_TRACE_DEBUG0 ("smp_encrypt_data");
+    if ( (p_out == NULL ) || (key_len != SMP_ENCRYT_KEY_SIZE) )
+    {
+        BTM_TRACE_ERROR0 ("smp_encrypt_data Failed");
+        return(FALSE);
+    }
+
+    if ((p_start = (UINT8 *)GKI_getbuf((SMP_ENCRYT_DATA_SIZE*4))) == NULL)
+    {
+        BTM_TRACE_ERROR0 ("smp_encrypt_data Failed unable to allocate buffer");
+        return(FALSE);
+    }
+
+    if (pt_len > SMP_ENCRYT_DATA_SIZE)
+        pt_len = SMP_ENCRYT_DATA_SIZE;
+
+    memset(p_start, 0, SMP_ENCRYT_DATA_SIZE * 4);
+    p = p_start;
+    ARRAY_TO_STREAM (p, plain_text, pt_len); /* byte 0 to byte 15 */
+    p_rev_data = p = p_start + SMP_ENCRYT_DATA_SIZE; /* start at byte 16 */
+    REVERSE_ARRAY_TO_STREAM (p, p_start, SMP_ENCRYT_DATA_SIZE);  /* byte 16 to byte 31 */
+    p_rev_key = p; /* start at byte 32 */
+    REVERSE_ARRAY_TO_STREAM (p, key, SMP_ENCRYT_KEY_SIZE); /* byte 32 to byte 47 */
+
+    smp_debug_print_nbyte_little_endian(key, (const UINT8 *)"Key", SMP_ENCRYT_KEY_SIZE);
+    smp_debug_print_nbyte_little_endian(p_start, (const UINT8 *)"Plain text", SMP_ENCRYT_DATA_SIZE);
+    p_rev_output = p;
+    aes_set_key(p_rev_key, SMP_ENCRYT_KEY_SIZE, &ctx);
+    aes_encrypt(p_rev_data, p, &ctx);  /* outputs in byte 48 to byte 63 */
+
+    p = p_out->param_buf;
+    REVERSE_ARRAY_TO_STREAM (p, p_rev_output, SMP_ENCRYT_DATA_SIZE);
+    smp_debug_print_nbyte_little_endian(p_out->param_buf, (const UINT8 *)"Encrypted text", SMP_ENCRYT_KEY_SIZE);
+
+    p_out->param_len = SMP_ENCRYT_KEY_SIZE;
+    p_out->status = HCI_SUCCESS;
+    p_out->opcode =  HCI_BLE_ENCRYPT;
+
+    GKI_freebuf(p_start);
+
+    return(TRUE);
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_generate_passkey
+**
+** Description      This function is called to generate passkey.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_passkey(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_generate_passkey");
+    p_cb->rand_enc_proc = SMP_GEN_TK;
+
+    /* generate MRand or SRand */
+    if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+        smp_rand_back(NULL);
+}
+/*******************************************************************************
+**
+** Function         smp_proc_passkey
+**
+** Description      This function is called to process a passkey.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_proc_passkey(tSMP_CB *p_cb , tBTM_RAND_ENC *p)
+{
+    UINT8   *tt = p_cb->tk;
+    tSMP_KEY    key;
+    UINT32  passkey; //= 19655 test number; */
+    UINT8 *pp = p->param_buf;
+
+    SMP_TRACE_DEBUG0 ("smp_proc_passkey ");
+    STREAM_TO_UINT32(passkey, pp);
+    passkey &= ~SMP_PASSKEY_MASK;
+
+    /* truncate by maximum value */
+    while (passkey > BTM_MAX_PASSKEY_VAL)
+        passkey >>= 1;
+    SMP_TRACE_ERROR1("Passkey generated = %d", passkey);
+
+    /* save the TK */
+    memset(p_cb->tk, 0, BT_OCTET16_LEN);
+    UINT32_TO_STREAM(tt, passkey);
+
+    key.key_type = SMP_KEY_TYPE_TK;
+    key.p_data  = p_cb->tk;
+
+    if (p_cb->p_callback)
+    {
+        (*p_cb->p_callback)(SMP_PASSKEY_NOTIF_EVT, p_cb->pairing_bda, (tSMP_EVT_DATA *)&passkey);
+    }
+
+    smp_sm_event(p_cb, SMP_KEY_READY_EVT, (tSMP_INT_DATA *)&key);
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_generate_stk
+**
+** Description      This function is called to generate STK calculated by running
+**                  AES with the TK value as key and a concatenation of the random
+**                  values.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_stk (tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BT_OCTET16      ptext;
+    UINT8           *p = ptext;
+    tSMP_ENC        output;
+    tSMP_STATUS     status = SMP_PAIR_FAIL_UNKNOWN;
+
+    SMP_TRACE_DEBUG0 ("smp_generate_stk ");
+
+    memset(p, 0, BT_OCTET16_LEN);
+    if (p_cb->role == HCI_ROLE_MASTER)
+    {
+        memcpy(p, p_cb->rand, BT_OCTET8_LEN);
+        memcpy(&p[BT_OCTET8_LEN], p_cb->rrand, BT_OCTET8_LEN);
+    }
+    else
+    {
+        memcpy(p, p_cb->rrand, BT_OCTET8_LEN);
+        memcpy(&p[BT_OCTET8_LEN], p_cb->rand, BT_OCTET8_LEN);
+    }
+
+    /* generate STK = Etk(rand|rrand)*/
+    if (!SMP_Encrypt( p_cb->tk, BT_OCTET16_LEN, ptext, BT_OCTET16_LEN, &output))
+    {
+        SMP_TRACE_ERROR0("smp_generate_stk failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        smp_process_stk(p_cb, &output);
+    }
+
+}
+/*******************************************************************************
+**
+** Function         smp_generate_confirm
+**
+** Description      This function is called to start the second pairing phase by
+**                  start generating initializer random number.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_confirm (tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_generate_confirm");
+    p_cb->rand_enc_proc = SMP_GEN_SRAND_MRAND;
+    /* generate MRand or SRand */
+    if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+        smp_rand_back(NULL);
+}
+/*******************************************************************************
+**
+** Function         smp_genenrate_rand_cont
+**
+** Description      This function is called to generate another 64 bits random for
+**                  MRand or Srand.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_genenrate_rand_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_genenrate_rand_cont ");
+    p_cb->rand_enc_proc = SMP_GEN_SRAND_MRAND_CONT;
+    /* generate 64 MSB of MRand or SRand */
+
+    if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+        smp_rand_back(NULL);
+}
+/*******************************************************************************
+**
+** Function         smp_generate_ltk
+**
+** Description      This function is called to calculate LTK, starting with DIV
+**                  generation.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_ltk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BOOLEAN     div_status;
+
+    SMP_TRACE_DEBUG0 ("smp_generate_ltk ");
+
+    div_status = btm_get_local_div(p_cb->pairing_bda, &p_cb->div);
+
+    if (div_status)
+    {
+        smp_genenrate_ltk_cont(p_cb, NULL);
+    }
+    else
+    {
+        SMP_TRACE_DEBUG0 ("Generate DIV for LTK");
+        p_cb->rand_enc_proc = SMP_GEN_DIV_LTK;
+        /* generate MRand or SRand */
+        if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+            smp_rand_back(NULL);
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_compute_csrk
+**
+** Description      This function is called to calculate CSRK
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_compute_csrk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BT_OCTET16  er;
+    UINT8       buffer[4]; /* for (r || DIV)  r=1*/
+    UINT16      r=1;
+    UINT8       *p=buffer;
+    tSMP_ENC    output;
+    tSMP_STATUS   status = SMP_PAIR_FAIL_UNKNOWN;
+
+    SMP_TRACE_DEBUG1 ("smp_compute_csrk div=%x", p_cb->div);
+    BTM_GetDeviceEncRoot(er);
+    /* CSRK = d1(ER, DIV, 1) */
+    UINT16_TO_STREAM(p, p_cb->div);
+    UINT16_TO_STREAM(p, r);
+
+    if (!SMP_Encrypt(er, BT_OCTET16_LEN, buffer, 4, &output))
+    {
+        SMP_TRACE_ERROR0("smp_generate_csrk failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        memcpy((void *)p_cb->csrk, output.param_buf, BT_OCTET16_LEN);
+        smp_send_csrk_info(p_cb, NULL);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         smp_generate_csrk
+**
+** Description      This function is called to calculate LTK, starting with DIV
+**                  generation.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_csrk(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BOOLEAN     div_status;
+
+    SMP_TRACE_DEBUG0 ("smp_generate_csrk");
+
+    div_status = btm_get_local_div(p_cb->pairing_bda, &p_cb->div);
+    if (div_status)
+    {
+        smp_compute_csrk(p_cb, NULL);
+    }
+    else
+    {
+        SMP_TRACE_DEBUG0 ("Generate DIV for CSRK");
+        p_cb->rand_enc_proc = SMP_GEN_DIV_CSRK;
+        if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+            smp_rand_back(NULL);
+    }
+}
+
+
+/*******************************************************************************
+** Function         smp_concatenate_peer
+**                  add pairing command sent from local device into p1.
+*******************************************************************************/
+void smp_concatenate_local( tSMP_CB *p_cb, UINT8 **p_data, UINT8 op_code)
+{
+    UINT8   *p = *p_data;
+
+    SMP_TRACE_DEBUG0 ("smp_concatenate_local ");
+    UINT8_TO_STREAM(p, op_code);
+    UINT8_TO_STREAM(p, p_cb->loc_io_caps);
+    UINT8_TO_STREAM(p, p_cb->loc_oob_flag);
+    UINT8_TO_STREAM(p, p_cb->loc_auth_req);
+    UINT8_TO_STREAM(p, p_cb->loc_enc_size);
+    UINT8_TO_STREAM(p, p_cb->loc_i_key);
+    UINT8_TO_STREAM(p, p_cb->loc_r_key);
+
+    *p_data = p;
+}
+/*******************************************************************************
+** Function         smp_concatenate_peer
+**                  add pairing command received from peer device into p1.
+*******************************************************************************/
+void smp_concatenate_peer( tSMP_CB *p_cb, UINT8 **p_data, UINT8 op_code)
+{
+    UINT8   *p = *p_data;
+
+    SMP_TRACE_DEBUG0 ("smp_concatenate_peer ");
+    UINT8_TO_STREAM(p, op_code);
+    UINT8_TO_STREAM(p, p_cb->peer_io_caps);
+    UINT8_TO_STREAM(p, p_cb->peer_oob_flag);
+    UINT8_TO_STREAM(p, p_cb->peer_auth_req);
+    UINT8_TO_STREAM(p, p_cb->peer_enc_size);
+    UINT8_TO_STREAM(p, p_cb->peer_i_key);
+    UINT8_TO_STREAM(p, p_cb->peer_r_key);
+
+    *p_data = p;
+}
+/*******************************************************************************
+**
+** Function         smp_gen_p1_4_confirm
+**
+** Description      Generate Confirm/Compare Step1:
+**                  p1 = pres || preq || rat' || iat'
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_gen_p1_4_confirm( tSMP_CB *p_cb, BT_OCTET16 p1)
+{
+    UINT8 *p = (UINT8 *)p1;
+    tBTM_SEC_DEV_REC  *p_dev_rec;
+
+    SMP_TRACE_DEBUG0 ("smp_gen_p1_4_confirm");
+    if ((p_dev_rec = btm_find_dev (p_cb->pairing_bda)) == NULL)
+    {
+        SMP_TRACE_ERROR0("can not generate confirm for unknown device");
+        return;
+    }
+
+    BTM_ReadConnectionAddr(p_cb->local_bda);
+
+    if (p_cb->role == HCI_ROLE_MASTER)
+    {
+        /* LSB : rat': initiator's(local) address type */
+        UINT8_TO_STREAM(p, 0);
+        /* LSB : iat': responder's address type */
+        UINT8_TO_STREAM(p, p_dev_rec->ble.ble_addr_type);
+        /* concatinate preq */
+        smp_concatenate_local(p_cb, &p, SMP_OPCODE_PAIRING_REQ);
+        /* concatinate pres */
+        smp_concatenate_peer(p_cb, &p, SMP_OPCODE_PAIRING_RSP);
+    }
+    else
+    {
+        /* LSB : iat': initiator's address type */
+        UINT8_TO_STREAM(p, p_dev_rec->ble.ble_addr_type);
+        /* LSB : rat': responder's(local) address type */
+        UINT8_TO_STREAM(p, 0);
+        /* concatinate preq */
+        smp_concatenate_peer(p_cb, &p, SMP_OPCODE_PAIRING_REQ);
+        /* concatinate pres */
+        smp_concatenate_local(p_cb, &p, SMP_OPCODE_PAIRING_RSP);
+    }
+#if SMP_DEBUG == TRUE
+    SMP_TRACE_DEBUG0("p1 = pres || preq || rat' || iat'");
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p1, (const UINT8 *)"P1", 16);
+#endif
+}
+/*******************************************************************************
+**
+** Function         smp_gen_p2_4_confirm
+**
+** Description      Generate Confirm/Compare Step2:
+**                  p2 = padding || ia || ra
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_gen_p2_4_confirm( tSMP_CB *p_cb, BT_OCTET16 p2)
+{
+    UINT8   *p = (UINT8 *)p2;
+
+    SMP_TRACE_DEBUG0 ("smp_gen_p2_4_confirm");
+    memset(p, 0, sizeof(BT_OCTET16));
+
+    if (p_cb->role == HCI_ROLE_MASTER)
+    {
+        /* LSB ra */
+        BDADDR_TO_STREAM(p, p_cb->pairing_bda);
+        /* ia */
+        BDADDR_TO_STREAM(p, p_cb->local_bda);
+    }
+    else
+    {
+        /* LSB ra */
+        BDADDR_TO_STREAM(p, p_cb->local_bda);
+        /* ia */
+        BDADDR_TO_STREAM(p, p_cb->pairing_bda);
+    }
+#if SMP_DEBUG == TRUE
+    SMP_TRACE_DEBUG0("p2 = padding || ia || ra");
+    smp_debug_print_nbyte_little_endian(p2, (const UINT8 *)"p2", 16);
+#endif
+}
+/*******************************************************************************
+**
+** Function         smp_calculate_comfirm
+**
+** Description      This function is called to calculate Confirm value.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_calculate_comfirm (tSMP_CB *p_cb, BT_OCTET16 rand, BD_ADDR bda)
+{
+    BT_OCTET16      p1;
+    tSMP_ENC       output;
+    tSMP_STATUS     status = SMP_PAIR_FAIL_UNKNOWN;
+
+    SMP_TRACE_DEBUG0 ("smp_calculate_comfirm ");
+    /* generate p1 = pres || preq || rat' || iat' */
+    smp_gen_p1_4_confirm(p_cb, p1);
+
+    /* p1 = rand XOR p1 */
+    smp_xor_128(p1, rand);
+
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p1, (const UINT8 *)"P1' = r XOR p1", 16);
+
+    /* calculate e(k, r XOR p1), where k = TK */
+    if (!SMP_Encrypt(p_cb->tk, BT_OCTET16_LEN, p1, BT_OCTET16_LEN, &output))
+    {
+        SMP_TRACE_ERROR0("smp_generate_csrk failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        smp_calculate_comfirm_cont(p_cb, &output);
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_calculate_comfirm_cont
+**
+** Description      This function is called when SConfirm/MConfirm is generated
+**                  proceed to send the Confirm request/response to peer device.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_calculate_comfirm_cont(tSMP_CB *p_cb, tSMP_ENC *p)
+{
+    BT_OCTET16    p2;
+    tSMP_ENC      output;
+    tSMP_STATUS     status = SMP_PAIR_FAIL_UNKNOWN;
+
+    SMP_TRACE_DEBUG0 ("smp_calculate_comfirm_cont ");
+#if SMP_DEBUG == TRUE
+    SMP_TRACE_DEBUG0("Confirm step 1 p1' = e(k, r XOR p1)  Generated");
+    smp_debug_print_nbyte_little_endian (p->param_buf, (const UINT8 *)"C1", 16);
+#endif
+
+    smp_gen_p2_4_confirm(p_cb, p2);
+
+    /* calculate p2 = (p1' XOR p2) */
+    smp_xor_128(p2, p->param_buf);
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p2, (const UINT8 *)"p2' = C1 xor p2", 16);
+
+    /* calculate: Confirm = E(k, p1' XOR p2) */
+    if (!SMP_Encrypt(p_cb->tk, BT_OCTET16_LEN, p2, BT_OCTET16_LEN, &output))
+    {
+        SMP_TRACE_ERROR0("smp_calculate_comfirm_cont failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        switch (p_cb->rand_enc_proc)
+        {
+            case SMP_GEN_CONFIRM:
+                smp_process_confirm(p_cb, &output);
+                break;
+
+            case SMP_GEN_COMPARE:
+                smp_process_compare(p_cb, &output);
+                break;
+        }
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_genenrate_confirm
+**
+** Description      This function is called when a 48 bits random number is generated
+**                  as SRand or MRand, continue to calculate Sconfirm or MConfirm.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_genenrate_confirm(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_genenrate_confirm ");
+    p_cb->rand_enc_proc = SMP_GEN_CONFIRM;
+
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->rand,  (const UINT8 *)"local rand", 16);
+
+    smp_calculate_comfirm(p_cb, p_cb->rand, p_cb->pairing_bda);
+}
+/*******************************************************************************
+**
+** Function         smp_generate_compare
+**
+** Description      This function is called to generate SConfirm for Slave device,
+**                  or MSlave for Master device. This function can be also used for
+**                  generating Compare number for confirm value check.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_generate_compare (tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    SMP_TRACE_DEBUG0 ("smp_generate_compare ");
+    p_cb->rand_enc_proc = SMP_GEN_COMPARE;
+
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->rrand,  (const UINT8 *)"peer rand", 16);
+
+    smp_calculate_comfirm(p_cb, p_cb->rrand, p_cb->local_bda);
+}
+/*******************************************************************************
+**
+** Function         smp_process_confirm
+**
+** Description      This function is called when SConfirm/MConfirm is generated
+**                  proceed to send the Confirm request/response to peer device.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_process_confirm(tSMP_CB *p_cb, tSMP_ENC *p)
+{
+    tSMP_KEY    key;
+
+    SMP_TRACE_DEBUG0 ("smp_process_confirm ");
+#if SMP_CONFORMANCE_TESTING == TRUE
+    if (p_cb->enable_test_confirm_val)
+    {
+        BTM_TRACE_DEBUG0 ("Use confirm value from script");
+        memcpy(p_cb->confirm, p_cb->test_confirm, BT_OCTET16_LEN);
+    }
+    else
+        memcpy(p_cb->confirm, p->param_buf, BT_OCTET16_LEN);
+#else
+    memcpy(p_cb->confirm, p->param_buf, BT_OCTET16_LEN);
+#endif
+
+
+#if (SMP_DEBUG == TRUE)
+    SMP_TRACE_DEBUG0("Confirm  Generated");
+    smp_debug_print_nbyte_little_endian ((UINT8 *)p_cb->confirm,  (const UINT8 *)"Confirm", 16);
+#endif
+
+    key.key_type = SMP_KEY_TYPE_CFM;
+    key.p_data = p->param_buf;
+
+    smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key);
+}
+/*******************************************************************************
+**
+** Function         smp_process_compare
+**
+** Description      This function is called when Compare is generated using the
+**                  RRand and local BDA, TK information.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_process_compare(tSMP_CB *p_cb, tSMP_ENC *p)
+{
+    tSMP_KEY    key;
+
+    SMP_TRACE_DEBUG0 ("smp_process_compare ");
+#if (SMP_DEBUG == TRUE)
+    SMP_TRACE_DEBUG0("Compare Generated");
+    smp_debug_print_nbyte_little_endian (p->param_buf,  (const UINT8 *)"Compare", 16);
+#endif
+    key.key_type = SMP_KEY_TYPE_CMP;
+    key.p_data   = p->param_buf;
+
+    smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key);
+}
+
+/*******************************************************************************
+**
+** Function         smp_process_stk
+**
+** Description      This function is called when STK is generated
+**                  proceed to send the encrypt the link using STK.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_process_stk(tSMP_CB *p_cb, tSMP_ENC *p)
+{
+    tSMP_KEY    key;
+
+    SMP_TRACE_DEBUG0 ("smp_process_stk ");
+#if (SMP_DEBUG == TRUE)
+    SMP_TRACE_ERROR0("STK Generated");
+#endif
+    smp_mask_enc_key(p_cb->loc_enc_size, p->param_buf);
+
+    key.key_type = SMP_KEY_TYPE_STK;
+    key.p_data   = p->param_buf;
+
+    smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key);
+}
+
+/*******************************************************************************
+**
+** Function         smp_genenrate_ltk_cont
+**
+** Description      This function is to calculate LTK = d1(ER, DIV, 0)= e(ER, DIV)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_genenrate_ltk_cont(tSMP_CB *p_cb, tSMP_INT_DATA *p_data)
+{
+    BT_OCTET16  er;
+    tSMP_ENC    output;
+    tSMP_STATUS     status = SMP_PAIR_FAIL_UNKNOWN;
+
+    SMP_TRACE_DEBUG0 ("smp_genenrate_ltk_cont ");
+    BTM_GetDeviceEncRoot(er);
+
+    /* LTK = d1(ER, DIV, 0)= e(ER, DIV)*/
+    if (!SMP_Encrypt(er, BT_OCTET16_LEN, (UINT8 *)&p_cb->div,
+                     sizeof(UINT16), &output))
+    {
+        SMP_TRACE_ERROR0("smp_genenrate_ltk_cont failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        /* mask the LTK */
+        smp_mask_enc_key(p_cb->loc_enc_size, output.param_buf);
+        memcpy((void *)p_cb->ltk, output.param_buf, BT_OCTET16_LEN);
+        smp_generate_rand_vector(p_cb, NULL);
+    }
+
+}
+
+/*******************************************************************************
+**
+** Function         smp_generate_y
+**
+** Description      This function is to proceed generate Y = E(DHK, Rand)
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_generate_y(tSMP_CB *p_cb, tSMP_INT_DATA *p)
+{
+    BT_OCTET16  dhk;
+    tSMP_ENC   output;
+    tSMP_STATUS     status = SMP_PAIR_FAIL_UNKNOWN;
+
+
+    SMP_TRACE_DEBUG0 ("smp_generate_y ");
+    BTM_GetDeviceDHK(dhk);
+
+    if (!SMP_Encrypt(dhk, BT_OCTET16_LEN, p_cb->enc_rand,
+                     BT_OCTET8_LEN, &output))
+    {
+        SMP_TRACE_ERROR0("smp_generate_y failed");
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &status);
+    }
+    else
+    {
+        smp_process_ediv(p_cb, &output);
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_generate_rand_vector
+**
+** Description      This function is called when LTK is generated, send state machine
+**                  event to SMP.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_generate_rand_vector (tSMP_CB *p_cb, tSMP_INT_DATA *p)
+{
+    /* generate EDIV and rand now */
+    /* generate random vector */
+    SMP_TRACE_DEBUG0 ("smp_generate_rand_vector ");
+    p_cb->rand_enc_proc = SMP_GEN_RAND_V;
+    if (!btsnd_hcic_ble_rand((void *)smp_rand_back))
+        smp_rand_back(NULL);
+
+}
+/*******************************************************************************
+**
+** Function         smp_genenrate_smp_process_edivltk_cont
+**
+** Description      This function is to calculate EDIV = Y xor DIV
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_process_ediv(tSMP_CB *p_cb, tSMP_ENC *p)
+{
+    tSMP_KEY    key;
+    UINT8 *pp= p->param_buf;
+    UINT16  y;
+
+    SMP_TRACE_DEBUG0 ("smp_process_ediv ");
+    STREAM_TO_UINT16(y, pp);
+
+    /* EDIV = Y xor DIV */
+    p_cb->ediv = p_cb->div ^ y;
+    /* send LTK ready */
+    SMP_TRACE_ERROR0("LTK ready");
+    key.key_type = SMP_KEY_TYPE_LTK;
+    key.p_data   = p->param_buf;
+
+    smp_sm_event(p_cb, SMP_KEY_READY_EVT, &key);
+}
+
+/*******************************************************************************
+**
+** Function         smp_rand_back
+**
+** Description      This function is to process the rand command finished,
+**                  process the random/encrypted number for further action.
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_rand_back(tBTM_RAND_ENC *p)
+{
+    tSMP_CB *p_cb = &smp_cb;
+    UINT8   *pp = p->param_buf;
+    UINT8   failure = SMP_PAIR_FAIL_UNKNOWN;
+    UINT8   state = p_cb->rand_enc_proc & ~0x80;
+
+    SMP_TRACE_DEBUG1 ("smp_rand_back state=0x%x", state);
+    if (p && p->status == HCI_SUCCESS)
+    {
+        switch (state)
+        {
+
+            case SMP_GEN_SRAND_MRAND:
+                memcpy((void *)p_cb->rand, p->param_buf, p->param_len);
+                smp_genenrate_rand_cont(p_cb, NULL);
+                break;
+
+            case SMP_GEN_SRAND_MRAND_CONT:
+                memcpy((void *)&p_cb->rand[8], p->param_buf, p->param_len);
+                smp_genenrate_confirm(p_cb, NULL);
+                break;
+
+            case SMP_GEN_DIV_LTK:
+                STREAM_TO_UINT16(p_cb->div, pp);
+                smp_genenrate_ltk_cont(p_cb, NULL);
+                break;
+
+            case SMP_GEN_DIV_CSRK:
+                STREAM_TO_UINT16(p_cb->div, pp);
+                smp_compute_csrk(p_cb, NULL);
+                break;
+
+            case SMP_GEN_TK:
+                smp_proc_passkey(p_cb, p);
+                break;
+
+            case SMP_GEN_RAND_V:
+                memcpy(p_cb->enc_rand, p->param_buf, BT_OCTET8_LEN);
+                smp_generate_y(p_cb, NULL);
+                break;
+
+        }
+
+        return;
+    }
+
+    SMP_TRACE_ERROR1("smp_rand_back Key generation failed: (%d)", p_cb->rand_enc_proc);
+
+    smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure);
+
+}
+#endif
+
diff --git a/stack/smp/smp_l2c.c b/stack/smp/smp_l2c.c
new file mode 100644
index 0000000..648cd59
--- /dev/null
+++ b/stack/smp/smp_l2c.c
@@ -0,0 +1,161 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for the SMP L2Cap interface
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+
+#include <string.h>
+#include "btm_ble_api.h"
+#include "l2c_api.h"
+
+#include "smp_int.h"
+
+
+
+static void smp_connect_cback (BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason);
+static void smp_data_ind (BD_ADDR bd_addr, BT_HDR *p_buf);
+
+/*******************************************************************************
+**
+** Function         smp_l2cap_if_init
+**
+** Description      This function is called during the SMP task startup
+**                  to register interface functions with L2CAP.
+**
+*******************************************************************************/
+void smp_l2cap_if_init (void)
+{
+    tL2CAP_FIXED_CHNL_REG  fixed_reg;
+    SMP_TRACE_EVENT0 ("SMDBG l2c smp_l2cap_if_init");
+    fixed_reg.fixed_chnl_opts.mode         = L2CAP_FCR_BASIC_MODE;
+    fixed_reg.fixed_chnl_opts.max_transmit = 0;
+    fixed_reg.fixed_chnl_opts.rtrans_tout  = 0;
+    fixed_reg.fixed_chnl_opts.mon_tout     = 0;
+    fixed_reg.fixed_chnl_opts.mps          = 0;
+    fixed_reg.fixed_chnl_opts.tx_win_sz    = 0;
+
+    fixed_reg.pL2CA_FixedConn_Cb = smp_connect_cback;
+    fixed_reg.pL2CA_FixedData_Cb = smp_data_ind;
+    fixed_reg.default_idle_tout  = 60;      /* set 60 seconds timeout, 0xffff default idle timeout */
+
+    /* Now, register with L2CAP */
+    L2CA_RegisterFixedChannel (L2CAP_SMP_CID, &fixed_reg);
+}
+
+/*******************************************************************************
+**
+** Function         smp_connect_cback
+**
+** Description      This callback function is called by L2CAP to indicate that
+**                  SMP channel is
+**                      connected (conn = TRUE)/disconnected (conn = FALSE).
+**
+*******************************************************************************/
+static void smp_connect_cback (BD_ADDR bd_addr, BOOLEAN connected, UINT16 reason)
+{
+    tSMP_CB   *p_cb = &smp_cb;
+    tSMP_INT_DATA   int_data;
+
+    SMP_TRACE_EVENT0 ("SMDBG l2c smp_connect_cback ");
+
+    if (memcmp(bd_addr, p_cb->pairing_bda, BD_ADDR_LEN) == 0)
+    {
+        SMP_TRACE_EVENT3 ("smp_connect_cback()  for pairing BDA: %08x%04x  Event: %s",
+                        (bd_addr[0]<<24)+(bd_addr[1]<<16)+(bd_addr[2]<<8) + bd_addr[3],
+                        (bd_addr[4]<<8)+bd_addr[5], (connected) ? "connected" : "disconnected");
+
+        if (connected)
+        {
+            if(!p_cb->connect_initialized)
+            {
+                p_cb->connect_initialized = TRUE;
+                /* initiating connection established */
+                p_cb->role = L2CA_GetBleConnRole(bd_addr);
+
+                /* initialize local i/r key to be default keys */
+                p_cb->loc_r_key = p_cb->loc_i_key =  SMP_SEC_DEFAULT_KEY;
+                p_cb->loc_auth_req = p_cb->peer_auth_req = SMP_DEFAULT_AUTH_REQ;
+                p_cb->cb_evt = SMP_IO_CAP_REQ_EVT;
+                smp_sm_event(p_cb, SMP_L2CAP_CONN_EVT, NULL);
+
+                BTM_ReadConnectionAddr(p_cb->local_bda);
+            }
+        }
+        else
+        {
+            int_data.reason = reason;
+            /* Disconnected while doing security */
+            smp_sm_event(p_cb, SMP_L2CAP_DISCONN_EVT, &int_data);
+        }
+    }
+}
+
+/*******************************************************************************
+**
+** Function         smp_data_ind
+**
+** Description      This function is called when data is received from L2CAP on
+**                  SMP channel.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+static void smp_data_ind (BD_ADDR bd_addr, BT_HDR *p_buf)
+{
+    tSMP_CB *p_cb = &smp_cb;
+    UINT8   *p = (UINT8 *)(p_buf + 1) + p_buf->offset;
+    UINT8   cmd ;
+    SMP_TRACE_EVENT0 ("SMDBG l2c smp_data_ind");
+
+    SMP_TRACE_EVENT0 ("Got smp_data_ind");
+
+    STREAM_TO_UINT8(cmd, p);
+
+
+    /* reject the pairing request if there is an on-going SMP pairing */
+    if (SMP_OPCODE_PAIRING_REQ == cmd || SMP_OPCODE_SEC_REQ == cmd)
+    {
+        if (p_cb->state == SMP_ST_IDLE)
+        {
+            p_cb->role = L2CA_GetBleConnRole(bd_addr);
+            memcpy(&p_cb->pairing_bda[0], bd_addr, BD_ADDR_LEN);
+        }
+        else if (memcmp(&bd_addr[0], p_cb->pairing_bda, BD_ADDR_LEN))
+        {
+            p_cb->failure = SMP_PAIR_NOT_SUPPORT;
+            smp_send_cmd(SMP_OPCODE_PAIRING_FAILED, p_cb);
+        }
+    }
+
+    if (memcmp(&bd_addr[0], p_cb->pairing_bda, BD_ADDR_LEN) == 0)
+    {
+        btu_stop_timer (&p_cb->rsp_timer_ent);
+        smp_sm_event(p_cb, cmd, p);
+    }
+
+    GKI_freebuf (p_buf);
+}
+#endif
diff --git a/stack/smp/smp_main.c b/stack/smp/smp_main.c
new file mode 100644
index 0000000..a60f54b
--- /dev/null
+++ b/stack/smp/smp_main.c
@@ -0,0 +1,518 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2003-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+
+    #include <string.h>
+    #include "smp_int.h"
+
+
+const char * const smp_state_name [] =
+{
+    "SMP_ST_IDLE",
+    "SMP_ST_WAIT_APP_RSP",
+    "SMP_ST_SEC_REQ_PENDING",
+    "SMP_ST_PAIR_REQ_RSP",
+    "SMP_ST_WAIT_CONFIRM",
+    "SMP_ST_CONFIRM",
+    "SMP_ST_RAND",
+    "SMP_ST_ENC_PENDING",
+    "SMP_ST_BOND_PENDING",
+    "SMP_ST_RELEASE_DELAY",
+    "SMP_ST_MAX"
+};
+const char * const smp_event_name [] =
+{
+    "PAIRING_REQ_EVT",
+    "PAIRING_RSP_EVT",
+    "CONFIRM_EVT",
+    "RAND_EVT",
+    "PAIRING_FAILED_EVT",
+    "ENC_INFO_EVT",
+    "MASTER_ID_EVT",
+    "ID_INFO_EVT",
+    "ID_ADDR_EVT",
+    "SIGN_INFO_EVT",
+    "SECURITY_REQ_EVT",
+    "KEY_READY_EVT",
+    "ENCRYPTED_EVT",
+    "L2CAP_CONN_EVT",
+    "L2CAP_DISCONN_EVT",
+    "API_IO_RSP_EVT",
+    "API_SEC_GRANT_EVT",
+    "TK_REQ_EVT",
+    "AUTH_CMPL_EVT",
+    "ENC_REQ_EVT",
+    "BOND_REQ_EVT",
+    "DISCARD_SEC_REQ_EVT",
+    "RELEASE_DELAY_EVT",
+    "RELEASE_DELAY_TOUT_EVT",
+    "MAX_EVT"
+};
+const char * smp_get_event_name(tSMP_EVENT event);
+const char * smp_get_state_name(tSMP_STATE state);
+
+    #define SMP_SM_IGNORE       0
+    #define SMP_NUM_ACTIONS     2
+    #define SMP_SME_NEXT_STATE  2
+    #define SMP_SM_NUM_COLS     3
+typedef const UINT8 (*tSMP_SM_TBL)[SMP_SM_NUM_COLS];
+
+enum
+{
+    SMP_PROC_SEC_REQ,
+    SMP_SEND_PAIR_REQ,
+    SMP_SEND_PAIR_RSP,
+    SMP_SEND_CONFIRM,
+    SMP_SEND_PAIR_FAIL,
+    SMP_SEND_INIT,
+    SMP_SEND_SECU_INFO,
+    SMP_SEND_ID_INFO,
+    SMP_SEND_LTK_REPLY,
+    SMP_PROC_PAIR_CMD,
+    SMP_PROC_PAIR_FAIL,
+    SMP_PROC_CONFIRM,
+    SMP_PROC_INIT,
+    SMP_PROC_ENC_INFO,
+    SMP_PROC_MASTER_ID,
+    SMP_PROC_ID_INFO,
+    SMP_PROC_ID_ADDR,
+    SMP_PROC_SRK_INFO,
+    SMP_PROC_SEC_GRANT,
+    SMP_PROC_SL_KEY,
+    SMP_PROC_COMPARE,
+    SMP_PROC_IO_RSP,
+    SMP_GENERATE_COMPARE,
+    SMP_GENERATE_CONFIRM,
+    SMP_GENERATE_STK,
+    SMP_KEY_DISTRIBUTE,
+    SMP_START_ENC,
+    SMP_PAIRING_CMPL,
+    SMP_DECIDE_ASSO_MODEL,
+    SMP_SEND_APP_CBACK,
+    SMP_CHECK_AUTH_REQ,
+    SMP_PAIR_TERMINATE,
+    SMP_ENC_CMPL,
+    SMP_PROC_DISCARD,
+    SMP_PROC_REL_DELAY,
+    SMP_PROC_REL_DELAY_TOUT,
+    SMP_SM_NO_ACTION
+};
+
+static const tSMP_ACT smp_sm_action[] =
+{
+    smp_proc_sec_req,
+    smp_send_pair_req,
+    smp_send_pair_rsp,
+    smp_send_confirm,
+    smp_send_pair_fail,
+    smp_send_init,
+    smp_send_enc_info,
+    smp_send_id_info,
+    smp_send_ltk_reply,
+    smp_proc_pair_cmd,
+    smp_proc_pair_fail,
+    smp_proc_confirm,
+    smp_proc_init,
+    smp_proc_enc_info,
+    smp_proc_master_id,
+    smp_proc_id_info,
+    smp_proc_id_addr,
+    smp_proc_srk_info,
+    smp_proc_sec_grant,
+    smp_proc_sl_key,
+    smp_proc_compare,
+    smp_proc_io_rsp,
+    smp_generate_compare,
+    smp_generate_confirm,
+    smp_generate_stk,
+    smp_key_distribution,
+    smp_start_enc,
+    smp_pairing_cmpl,
+    smp_decide_asso_model,
+    smp_send_app_cback,
+    smp_check_auth_req,
+    smp_pair_terminate,
+    smp_enc_cmpl,
+    smp_proc_discard,
+    smp_proc_release_delay,
+    smp_proc_release_delay_tout,
+};
+/************ SMP Master FSM State/Event Indirection Table **************/
+static const UINT8 smp_ma_entry_map[][SMP_ST_MAX] =
+{
+/* state name:           Idle WaitApp SecReq Pair   Wait Confirm Init Enc   Bond  Rel
+                               Rsp    Pend   ReqRsp Cfm              Pend  Pend   Delay    */
+/* PAIR_REQ           */{ 0,    0,     0,      0,     0,   0,    0,   0,    0,     0   },
+/* PAIR_RSP           */{ 0,    0,     0,      1,     0,   0,    0,   0,    0,     0   },
+/* CONFIRM            */{ 0,    0,     0,      0,     0,   1,    0,   0,    0,     0   },
+/* INIT               */{ 0,    0,     0,      0,     0,   0,    1,   0,    0,     0   },
+/* PAIR_FAIL          */{ 0,    0x81,  0,      0x81,  0x81,0x81, 0x81,0,    0,     0   },
+/* ENC_INFO           */{ 0,    0,     0,      0,     0,   0,    0,   0,    1,     0   },
+/* MASTER_ID          */{ 0,    0,     0,      0,     0,   0,    0,   0,    4,     0   },
+/* ID_INFO            */{ 0,    0,     0,      0,     0,   0,    0,   0,    2,     0   },
+/* ID_ADDR            */{ 0,    0,     0,      0,     0,   0,    0,   0,    5,     0   },
+/* SIGN_INFO          */{ 0,    0,     0,      0,     0,   0,    0,   0,    3,     0   },
+/* SEC_REQ            */{ 2,    0,     0,      0,     0,   0,    0,   0,    0,     0   },
+/* KEY_READY          */{ 0,    3,     0,      3,     1,   0,    2,   1,    6,     0   },
+/* ENC_CMPL           */{ 0,    0,     0,      0,     0,   0,    0,   2,    0,     0   },
+/* L2C_CONN           */{ 1,    0,     0,      0,     0,   0,    0,   0,    0,     0   },
+/* L2C_DISC           */{ 0,    0x83,  0,      0x83,  0x83,0x83, 0x83,0x83, 0x83,  2   },
+/* IO_RSP             */{ 0,    2,     0,      0,     0,   0,    0,   0,    0,     0   },
+/* SEC_GRANT          */{ 0,    1,     0,      0,     0,   0,    0,   0,    0,     0   },
+/* TK_REQ             */{ 0,    0,     0,      2,     0,   0,    0,   0,    0,     0   },
+/* AUTH_CMPL          */{ 0,    0x82,  0,      0x82,  0x82,0x82, 0x82,0x82, 0x82,  0   },
+/* ENC_REQ            */{ 0,    4,     0,      0,     0,   0,    3,   0,    0,     0   },
+/* BOND_REQ           */{ 0,    0,     0,      0,     0,   0,    0,   3,    0,     0   },
+/* DISCARD_SEC_REQ    */{ 0,    5,     0,      0,     0,   0,    0,   3,    0,     0   },
+/* RELEASE_DELAY      */{ 0,    0,     0,      0,     0,   0,    0,   0,    0,     1   },
+/* RELEASE_DELAY_TOUT */{ 0,    0,     0,      0,     0,   0,    0,   0,    0,     2   },
+};
+
+static const UINT8 smp_all_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                              Next State */
+/* PAIR_FAIL */          {SMP_PROC_PAIR_FAIL,       SMP_PROC_REL_DELAY_TOUT,    SMP_ST_IDLE},
+/* AUTH_CMPL */          {SMP_SEND_PAIR_FAIL,      SMP_PAIRING_CMPL,      SMP_ST_RELEASE_DELAY},
+/* L2C_DISC  */          {SMP_PAIR_TERMINATE,      SMP_SM_NO_ACTION,      SMP_ST_IDLE}
+};
+
+static const UINT8 smp_ma_idle_table[][SMP_SM_NUM_COLS] = {
+/* Event       Action                   Next State */
+/* L2C_CONN */      {SMP_SEND_APP_CBACK,     SMP_SM_NO_ACTION,   SMP_ST_WAIT_APP_RSP},
+/* SEC_REQ  */      {SMP_PROC_SEC_REQ,       SMP_SEND_APP_CBACK, SMP_ST_WAIT_APP_RSP}
+};
+
+static const UINT8 smp_ma_wait_app_rsp_table[][SMP_SM_NUM_COLS] = {
+/* Event       			                                 Action          Next State */
+/* SEC_GRANT            */ { SMP_PROC_SEC_GRANT,   SMP_SEND_APP_CBACK, SMP_ST_WAIT_APP_RSP},
+/* IO_RSP               */ { SMP_SEND_PAIR_REQ,    SMP_SM_NO_ACTION,   SMP_ST_PAIR_REQ_RSP},
+/* KEY_READY            */ { SMP_GENERATE_CONFIRM, SMP_SM_NO_ACTION,   SMP_ST_WAIT_CONFIRM},/* TK ready */
+/* ENC_REQ              */ { SMP_START_ENC,        SMP_SM_NO_ACTION,   SMP_ST_ENC_PENDING},/* start enc mode setup */
+/* DISCARD_SEC_REQ      */ { SMP_PROC_DISCARD,     SMP_SM_NO_ACTION,   SMP_ST_IDLE}
+};
+
+static const UINT8 smp_ma_pair_req_rsp_table [][SMP_SM_NUM_COLS] = {
+/* Event       		Action              Next State */
+/* PAIR_RSP */ { SMP_PROC_PAIR_CMD,     SMP_DECIDE_ASSO_MODEL,  SMP_ST_PAIR_REQ_RSP},
+/* TK_REQ   */ { SMP_SEND_APP_CBACK,    SMP_SM_NO_ACTION,       SMP_ST_WAIT_APP_RSP},
+/* KEY_READY */{ SMP_GENERATE_CONFIRM,  SMP_SM_NO_ACTION,       SMP_ST_WAIT_CONFIRM} /* TK ready */
+};
+
+static const UINT8 smp_ma_wait_confirm_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* KEY_READY*/ {SMP_SEND_CONFIRM,       SMP_SM_NO_ACTION,       SMP_ST_CONFIRM}/* CONFIRM ready */
+};
+
+static const UINT8 smp_ma_confirm_table [][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* CONFIRM  */ { SMP_PROC_CONFIRM,      SMP_SEND_INIT,          SMP_ST_RAND}
+};
+
+static const UINT8 smp_ma_init_table [][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* INIT     */ { SMP_PROC_INIT,         SMP_GENERATE_COMPARE,    SMP_ST_RAND},
+/* KEY_READY*/ { SMP_PROC_COMPARE,      SMP_SM_NO_ACTION,   SMP_ST_RAND},  /* Compare ready */
+/* ENC_REQ  */ { SMP_GENERATE_STK,      SMP_SM_NO_ACTION,   SMP_ST_ENC_PENDING}
+};
+static const UINT8 smp_ma_enc_pending_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* KEY_READY */ { SMP_START_ENC,        SMP_SM_NO_ACTION,   SMP_ST_ENC_PENDING},  /* STK ready */
+/* ENCRYPTED */ { SMP_CHECK_AUTH_REQ,   SMP_SM_NO_ACTION,   SMP_ST_ENC_PENDING},
+/* BOND_REQ  */ { SMP_KEY_DISTRIBUTE,   SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING}
+};
+static const UINT8 smp_ma_bond_pending_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* ENC_INFO */ { SMP_PROC_ENC_INFO,     SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING},
+/* ID_INFO  */ { SMP_PROC_ID_INFO,      SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING},
+/* SIGN_INFO*/ { SMP_PROC_SRK_INFO,     SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING},
+/* MASTER_ID*/ { SMP_PROC_MASTER_ID,    SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING},
+/* ID_ADDR  */ { SMP_PROC_ID_ADDR,      SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING},
+/* KEY_READY */ {SMP_SEND_SECU_INFO,    SMP_SM_NO_ACTION,   SMP_ST_BOND_PENDING}   /* LTK ready */
+};
+
+static const UINT8 smp_ma_rel_delay_table[][SMP_SM_NUM_COLS] = {
+/* Event       Action                   Next State */
+/* RELEASE_DELAY*/       {SMP_PROC_REL_DELAY,      SMP_SM_NO_ACTION,      SMP_ST_RELEASE_DELAY},
+/* RELEASE_DELAY_TOUT*/  {SMP_PROC_REL_DELAY_TOUT, SMP_SM_NO_ACTION,      SMP_ST_IDLE}
+};
+
+
+/************ SMP Slave FSM State/Event Indirection Table **************/
+static const UINT8 smp_sl_entry_map[][SMP_ST_MAX] =
+{
+/* state name:            Idle Wait   SecReq Pair   Wait Confirm Init Enc   Bond  Rel
+                               AppRsp Pend   ReqRsp Cfm              Pend  Pend   Delay   */
+/* PAIR_REQ */           { 2,    0,    1,      0,     0,   0,    0,   0,    0,     0       },
+/* PAIR_RSP */           { 0,    0,    0,      0,     0,   0,    0,   0,    0,     0       },
+/* CONFIRM  */           { 0,    4,    0,      1,     1,   0,    0,   0,    0,     0       },
+/* INIT     */           { 0,    0,    0,      0,     0,   1,    2,   0,    0,     0       },
+/* PAIR_FAIL*/           { 0,    0x81, 0x81,   0x81,  0x81,0x81, 0x81,0x81, 0,     0       },
+/* ENC_INFO */           { 0,    0,    0,      0,     0,   0,    0,   0,    3,     0       },
+/* MASTER_ID*/           { 0,    0,    0,      0,     0,   0,    0,   0,    5,     0       },
+/* ID_INFO  */           { 0,    0,    0,      0,     0,   0,    0,   0,    4,     0       },
+/* ID_ADDR  */           { 0,    0,    0,      0,     0,   0,    0,   0,    6,     0       },
+/* SIGN_INFO*/           { 0,    0,    0,      0,     0,   0,    0,   0,    2,     0       },
+/* SEC_REQ  */           { 0,    0,    0,      0,     0,   0,    0,   0,    0,     0       },
+
+/* KEY_READY*/           { 0,    3,    0,      3,     2,   2,    1,   2,    1,     0       },
+/* ENC_CMPL */           { 0,    0,    2,      0,     0,   0,    0,   3,    0,     0       },
+/* L2C_CONN */           { 1,    0,    0,      0,     0,   0,    0,   0,    0,     0       },
+/* L2C_DISC */           { 0,    0x83, 0x83,   0x83,  0x83,0x83, 0x83,0x83, 0x83,  2       },
+/* IO_RSP   */           { 0,    1,    0,      0,     0,   0,    0,   0,    0,     0       },
+/* SEC_GRANT*/           { 0,    2,    0,      0,     0,   0,    0,   0,    0,     0       },
+
+/* TK_REQ   */           { 0,    0,    0,      2,     0,   0,    0,   0,    0,     0       },
+/* AUTH_CMPL*/           { 0,    0x82, 0x82,   0x82,  0x82,0x82, 0x82,0x82, 0x82,  0       },
+/* ENC_REQ  */           { 0,    0,    0,      0,     0,   0,    0,   1,    0,     0       },
+/* BOND_REQ */           { 0,    0,    0,      0,     0,   0,    0,   4,    0,     0       },
+/* DISCARD_SEC_REQ    */ { 0,    0,    0,      0,     0,   0,    0,   0,    0,     0       },
+/* RELEASE_DELAY      */ { 0,    0,    0,      0,     0,   0,    0,   0,    0,     1       },
+/* RELEASE_DELAY_TOUT */ { 0,    0,    0,      0,     0,   0,    0,   0,    0,     2       },
+};
+
+static const UINT8 smp_sl_idle_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                              Next State */
+/* L2C_CONN */      {SMP_SEND_APP_CBACK,  SMP_SM_NO_ACTION,       SMP_ST_WAIT_APP_RSP},
+/* PAIR_REQ */      {SMP_PROC_PAIR_CMD,   SMP_SEND_APP_CBACK,     SMP_ST_WAIT_APP_RSP}
+};
+
+static const UINT8 smp_sl_wait_app_rsp_table [][SMP_SM_NUM_COLS] = {
+/* Event       			Action              Next State */
+/* IO_RSP    */ {SMP_PROC_IO_RSP,       SMP_SM_NO_ACTION,       SMP_ST_PAIR_REQ_RSP},
+/* SEC_GRANT */ {SMP_PROC_SEC_GRANT,    SMP_SEND_APP_CBACK,     SMP_ST_WAIT_APP_RSP},
+/* KEY_READY */ {SMP_PROC_SL_KEY,       SMP_SM_NO_ACTION,       SMP_ST_WAIT_APP_RSP},/* TK ready */
+/* CONFIRM   */ {SMP_PROC_CONFIRM,      SMP_SM_NO_ACTION,       SMP_ST_CONFIRM}
+};
+
+static const UINT8 smp_sl_sec_request_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action          Next State */
+/* PAIR_REQ */{SMP_PROC_PAIR_CMD,       SMP_SEND_PAIR_RSP,      SMP_ST_PAIR_REQ_RSP},
+/* ENCRYPTED*/{SMP_ENC_CMPL,        SMP_SM_NO_ACTION,       SMP_ST_PAIR_REQ_RSP},
+};
+
+static const UINT8 smp_sl_pair_req_rsp_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   		Next State */
+/* CONFIRM  */ {SMP_PROC_CONFIRM,       SMP_SM_NO_ACTION,   SMP_ST_CONFIRM},
+/* TK_REQ   */ {SMP_SEND_APP_CBACK,     SMP_SM_NO_ACTION,   SMP_ST_WAIT_APP_RSP},
+/* KEY_READY */{SMP_PROC_SL_KEY,        SMP_SM_NO_ACTION,   SMP_ST_PAIR_REQ_RSP} /* TK/Confirm ready */
+
+};
+
+static const UINT8 smp_sl_wait_confirm_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   			Next State */
+/* CONFIRM  */ {SMP_PROC_CONFIRM,       SMP_SEND_CONFIRM,   SMP_ST_CONFIRM},
+/* KEY_READY*/ {SMP_PROC_SL_KEY,        SMP_SM_NO_ACTION,   SMP_ST_WAIT_CONFIRM}
+};
+static const UINT8 smp_sl_confirm_table [][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   		Next State */
+/* INIT_EVT */{ SMP_PROC_INIT,          SMP_GENERATE_COMPARE,   SMP_ST_RAND},
+/* KEY_READY*/ {SMP_PROC_SL_KEY,        SMP_SM_NO_ACTION,       SMP_ST_CONFIRM} /* TK/Confirm ready */
+};
+static const UINT8 smp_sl_init_table [][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   		        Next State */
+/* KEY_READY */ {SMP_PROC_COMPARE,      SMP_SM_NO_ACTION,       SMP_ST_RAND},   /* compare match */
+/* INIT_EVT  */ {SMP_SEND_INIT,         SMP_SM_NO_ACTION,       SMP_ST_ENC_PENDING}
+};
+static const UINT8 smp_sl_enc_pending_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   		Next State */
+/* ENC_REQ   */ {SMP_GENERATE_STK,      SMP_SM_NO_ACTION,       SMP_ST_ENC_PENDING},
+/* KEY_READY */ {SMP_SEND_LTK_REPLY,    SMP_SM_NO_ACTION,       SMP_ST_ENC_PENDING},/* STK ready */
+/* ENCRYPTED */ {SMP_CHECK_AUTH_REQ,    SMP_SM_NO_ACTION,       SMP_ST_ENC_PENDING},
+/* BOND_REQ  */ {SMP_KEY_DISTRIBUTE,    SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING}
+};
+static const UINT8 smp_sl_bond_pending_table[][SMP_SM_NUM_COLS] = {
+/* Event       			Action                   		Next State */
+/* KEY_READY */ {SMP_SEND_SECU_INFO,    SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING},   /* LTK ready */
+/* SIGN_INFO */ {SMP_PROC_SRK_INFO,     SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING},   /* rev SRK */
+/* ENC_INFO */ { SMP_PROC_ENC_INFO,     SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING},
+/* ID_INFO  */ { SMP_PROC_ID_INFO,      SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING},
+/* MASTER_ID*/ { SMP_PROC_MASTER_ID,    SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING},
+/* ID_ADDR  */ { SMP_PROC_ID_ADDR,      SMP_SM_NO_ACTION,       SMP_ST_BOND_PENDING}
+
+};
+
+static const UINT8 smp_sl_rel_delay_table[][SMP_SM_NUM_COLS] = {
+/* Event       Action                   Next State */
+/* RELEASE_DELAY*/       {SMP_PROC_REL_DELAY,      SMP_SM_NO_ACTION,      SMP_ST_RELEASE_DELAY},
+/* RELEASE_DELAY_TOUT*/  {SMP_PROC_REL_DELAY_TOUT, SMP_SM_NO_ACTION,      SMP_ST_IDLE}
+};
+
+static const tSMP_SM_TBL smp_state_table[][2] = {
+    {smp_ma_idle_table,          smp_sl_idle_table},                  /* SMP_ST_IDLE*/
+    {smp_ma_wait_app_rsp_table,  smp_sl_wait_app_rsp_table},           /* SMP_ST_WAIT_APP_RSP */
+    {NULL,                       smp_sl_sec_request_table},            /* SMP_ST_SEC_REQ_PENDING */
+    {smp_ma_pair_req_rsp_table,  smp_sl_pair_req_rsp_table},           /* SMP_ST_PAIR_REQ_RSP */
+    {smp_ma_wait_confirm_table,  smp_sl_wait_confirm_table},           /* SMP_ST_WAIT_CONFIRM */
+    {smp_ma_confirm_table,       smp_sl_confirm_table},                /* SMP_ST_CONFIRM */
+    {smp_ma_init_table,          smp_sl_init_table},                   /* SMP_ST_RAND */
+    {smp_ma_enc_pending_table,   smp_sl_enc_pending_table},            /* SMP_ST_ENC_PENDING */
+    {smp_ma_bond_pending_table,  smp_sl_bond_pending_table},           /* SMP_ST_BOND_PENDING */
+    {smp_ma_rel_delay_table,     smp_sl_rel_delay_table}               /* SMP_ST_RELEASE_DELAY */
+};
+
+typedef const UINT8 (*tSMP_ENTRY_TBL)[SMP_ST_MAX];
+static const tSMP_ENTRY_TBL smp_entry_table[] ={
+    smp_ma_entry_map,
+    smp_sl_entry_map
+};
+
+#if SMP_DYNAMIC_MEMORY == FALSE
+tSMP_CB  smp_cb;
+#endif
+#define SMP_ALL_TBL_MASK        0x80
+
+
+/*******************************************************************************
+** Function     smp_set_state
+** Returns      None
+*******************************************************************************/
+void smp_set_state(tSMP_STATE state)
+{
+    if (state < SMP_ST_MAX)
+    {
+        SMP_TRACE_DEBUG4( "State change: %s(%d) ==> %s(%d)",
+                          smp_get_state_name(smp_cb.state), smp_cb.state,
+                          smp_get_state_name(state), state );
+        smp_cb.state = state;
+    }
+    else
+    {
+        SMP_TRACE_DEBUG1("smp_set_state invalid state =%d", state );
+    }
+}
+
+/*******************************************************************************
+** Function     smp_get_state
+** Returns      The smp state
+*******************************************************************************/
+tSMP_STATE smp_get_state(void)
+{
+    return smp_cb.state;
+}
+
+
+/*******************************************************************************
+**
+** Function     smp_sm_event
+**
+** Description  Handle events to the state machine. It looks up the entry
+**              in the smp_entry_table array.
+**              If it is a valid entry, it gets the state table.Set the next state,
+**              if not NULL state.Execute the action function according to the
+**              state table. If the state returned by action function is not NULL
+**              state, adjust the new state to the returned state.If (api_evt != MAX),
+**              call callback function.
+**
+** Returns      void.
+**
+*******************************************************************************/
+void smp_sm_event(tSMP_CB *p_cb, tSMP_EVENT event, void *p_data)
+{
+    UINT8           curr_state = p_cb->state;
+    tSMP_SM_TBL     state_table;
+    UINT8           action, entry, i;
+    tSMP_ENTRY_TBL  entry_table =  smp_entry_table[p_cb->role];
+
+    SMP_TRACE_EVENT0("main smp_sm_event");
+    if (curr_state >= SMP_ST_MAX)
+    {
+        SMP_TRACE_DEBUG1( "Invalid state: %d", curr_state) ;
+        return;
+    }
+
+    SMP_TRACE_DEBUG5( "SMP Role: %s State: [%s (%d)], Event: [%s (%d)]",\
+                      (p_cb->role == 0x01) ?"Slave" : "Master", smp_get_state_name( p_cb->state),
+                      p_cb->state, smp_get_event_name(event), event) ;
+
+    /* look up the state table for the current state */
+    /* lookup entry /w event & curr_state */
+    /* If entry is ignore, return.
+     * Otherwise, get state table (according to curr_state or all_state) */
+    if ( (entry = entry_table[event - 1][curr_state]) != SMP_SM_IGNORE )
+    {
+        if (entry & SMP_ALL_TBL_MASK)
+        {
+            entry &= ~SMP_ALL_TBL_MASK;
+            state_table = smp_all_table;
+        }
+        else
+            state_table = smp_state_table[curr_state][p_cb->role];
+    }
+    else
+    {
+        SMP_TRACE_DEBUG4( "Ignore event [%s (%d)] in state [%s (%d)]",
+                          smp_get_event_name(event), event, smp_get_state_name(curr_state), curr_state);
+        return;
+    }
+
+    /* Get possible next state from state table. */
+
+    smp_set_state(state_table[entry-1][SMP_SME_NEXT_STATE]);
+
+    /* If action is not ignore, clear param, exec action and get next state.
+     * The action function may set the Param for cback.
+     * Depending on param, call cback or free buffer. */
+    /* execute action */
+    /* execute action functions */
+    for (i = 0; i < SMP_NUM_ACTIONS; i++)
+    {
+        if ((action = state_table[entry-1][i]) != SMP_SM_NO_ACTION)
+        {
+            (*smp_sm_action[action])(p_cb, (tSMP_INT_DATA *)p_data);
+        }
+        else
+        {
+            break;
+        }
+    }
+    SMP_TRACE_DEBUG1( "result state = %s", smp_get_state_name( p_cb->state ) ) ;
+}
+
+
+/*******************************************************************************
+** Function     smp_get_state_name
+** Returns      The smp state name.
+*******************************************************************************/
+const char * smp_get_state_name(tSMP_STATE state)
+{
+    const char * p_str = smp_state_name[SMP_ST_MAX];
+
+    if (state < SMP_ST_MAX)
+    {
+        p_str = smp_state_name[state];
+    }
+    return p_str;
+}
+/*******************************************************************************
+** Function     smp_get_event_name
+** Returns      The smp event name.
+*******************************************************************************/
+const char * smp_get_event_name(tSMP_EVENT event)
+{
+    const char * p_str = smp_event_name[SMP_MAX_EVT - 1];
+
+    if (event < SMP_MAX_EVT)
+    {
+        p_str = smp_event_name[event- 1];
+    }
+    return p_str;
+}
+#endif
+
diff --git a/stack/smp/smp_utils.c b/stack/smp/smp_utils.c
new file mode 100644
index 0000000..5622880
--- /dev/null
+++ b/stack/smp/smp_utils.c
@@ -0,0 +1,675 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 1999-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *  This file contains functions for the SMP L2Cap utility functions
+ *
+ ******************************************************************************/
+#include "bt_target.h"
+
+#if SMP_INCLUDED == TRUE
+
+#include "bt_types.h"
+#include <string.h>
+#include <ctype.h>
+#include "hcidefs.h"
+#include "btm_ble_api.h"
+#include "l2c_api.h"
+#include "l2c_int.h"
+#include "smp_int.h"
+
+
+#define SMP_PAIRING_REQ_SIZE    7
+#define SMP_CONFIRM_CMD_SIZE    (BT_OCTET16_LEN + 1)
+#define SMP_INIT_CMD_SIZE       (BT_OCTET16_LEN + 1)
+#define SMP_ENC_INFO_SIZE       (BT_OCTET16_LEN + 1)
+#define SMP_MASTER_ID_SIZE      (BT_OCTET8_LEN + 2 + 1)
+#define SMP_ID_INFO_SIZE        (BT_OCTET16_LEN + 1)
+#define SMP_ID_ADDR_SIZE        (BD_ADDR_LEN + 1 + 1)
+#define SMP_SIGN_INFO_SIZE      (BT_OCTET16_LEN + 1)
+#define SMP_PAIR_FAIL_SIZE      2
+
+
+/* type for action functions */
+typedef BT_HDR * (*tSMP_CMD_ACT)(UINT8 cmd_code, tSMP_CB *p_cb);
+
+static BT_HDR * smp_build_pairing_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_confirm_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_rand_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_pairing_fail(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_identity_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_encrypt_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_security_request(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_signing_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_master_id_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+static BT_HDR * smp_build_id_addr_cmd(UINT8 cmd_code, tSMP_CB *p_cb);
+
+const tSMP_CMD_ACT smp_cmd_build_act[] =
+{
+    NULL,
+    smp_build_pairing_cmd,      /* 0x01: pairing request */
+    smp_build_pairing_cmd,      /* 0x02: pairing response */
+    smp_build_confirm_cmd,      /* 0x03: pairing confirm */
+    smp_build_rand_cmd,         /* 0x04: pairing initializer request */
+    smp_build_pairing_fail,     /* 0x05: pairing failure */
+    smp_build_encrypt_info_cmd, /* 0x06: security information command */
+    smp_build_master_id_cmd,    /* 0x07: master identity command */
+    smp_build_identity_info_cmd,  /* 0x08: identity information command */
+    smp_build_id_addr_cmd,          /* 0x09: signing information */
+    smp_build_signing_info_cmd,    /* 0x0A: signing information */
+    smp_build_security_request    /* 0x0B: security request */
+};
+/*******************************************************************************
+**
+** Function         smp_send_msg_to_L2CAP
+**
+** Description      Send message to L2CAP.
+**
+*******************************************************************************/
+BOOLEAN  smp_send_msg_to_L2CAP(BD_ADDR rem_bda, BT_HDR *p_toL2CAP)
+{
+    UINT16              l2cap_ret;
+
+    SMP_TRACE_EVENT0("smp_send_msg_to_L2CAP");
+
+    if ((l2cap_ret = L2CA_SendFixedChnlData (L2CAP_SMP_CID, rem_bda, p_toL2CAP)) == L2CAP_DW_FAILED)
+    {
+        SMP_TRACE_ERROR1("SMP   failed to pass msg:0x%0x to L2CAP",
+                         *((UINT8 *)(p_toL2CAP + 1) + p_toL2CAP->offset));
+        GKI_freebuf(p_toL2CAP);
+        return FALSE;
+    }
+    else
+    {
+        return TRUE;
+    }
+}
+/*******************************************************************************
+**
+** Function         smp_send_cmd
+**
+** Description      send a SMP command on L2CAP channel.
+**
+*******************************************************************************/
+BOOLEAN smp_send_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR *p_buf;
+    BOOLEAN sent = FALSE;
+    UINT8 failure = SMP_PAIR_INTERNAL_ERR;
+    SMP_TRACE_EVENT1("smp_send_cmd on l2cap cmd_code=0x%x", cmd_code);
+    if ( cmd_code < SMP_OPCODE_MAX &&
+         smp_cmd_build_act[cmd_code] != NULL)
+    {
+        p_buf = (*smp_cmd_build_act[cmd_code])(cmd_code, p_cb);
+
+        if (p_buf != NULL &&
+            smp_send_msg_to_L2CAP(p_cb->pairing_bda, p_buf))
+        {
+            sent = TRUE;
+
+            btu_stop_timer (&p_cb->rsp_timer_ent);
+            btu_start_timer (&p_cb->rsp_timer_ent, BTU_TTYPE_SMP_PAIRING_CMD,
+                             SMP_WAIT_FOR_RSP_TOUT);
+        }
+    }
+
+    if (!sent)
+    {
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure);
+    }
+    return sent;
+}
+
+
+
+/*******************************************************************************
+**
+** Function         smp_rsp_timeout
+**
+** Description      Called when SMP wait for SMP command response timer expires
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_rsp_timeout(TIMER_LIST_ENT *p_tle)
+{
+    tSMP_CB   *p_cb = &smp_cb;
+    UINT8 failure = SMP_RSP_TIMEOUT;
+
+    SMP_TRACE_EVENT1("smp_rsp_timeout state:%d", p_cb->state);
+
+    if (smp_get_state() == SMP_ST_RELEASE_DELAY)
+    {
+        smp_sm_event(p_cb, SMP_RELEASE_DELAY_TOUT_EVT, NULL);
+    }
+    else
+    {
+        smp_sm_event(p_cb, SMP_AUTH_CMPL_EVT, &failure);
+    }
+}
+
+/*******************************************************************************
+**
+** Function         smp_build_pairing_req_cmd
+**
+** Description      Build pairing request command.
+**
+*******************************************************************************/
+BT_HDR * smp_build_pairing_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_pairing_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_PAIRING_REQ_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, cmd_code);
+        UINT8_TO_STREAM (p, p_cb->loc_io_caps);
+        UINT8_TO_STREAM (p, p_cb->loc_oob_flag);
+        UINT8_TO_STREAM (p, p_cb->loc_auth_req);
+        UINT8_TO_STREAM (p, p_cb->loc_enc_size);
+        UINT8_TO_STREAM (p, p_cb->loc_i_key);
+        UINT8_TO_STREAM (p, p_cb->loc_r_key);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        /* 1B ERR_RSP op code + 1B cmd_op_code + 2B handle + 1B status */
+        p_buf->len = SMP_PAIRING_REQ_SIZE;
+    }
+
+    return p_buf;
+}
+
+/*******************************************************************************
+**
+** Function         smp_build_confirm_cmd
+**
+** Description      Build confirm request command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_confirm_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_confirm_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_CONFIRM_CMD_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_CONFIRM);
+        ARRAY_TO_STREAM (p, p_cb->confirm, BT_OCTET16_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_CONFIRM_CMD_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_rand_cmd
+**
+** Description      Build Initializer command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_rand_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_rand_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_INIT_CMD_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_INIT);
+        ARRAY_TO_STREAM (p, p_cb->rand, BT_OCTET16_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_INIT_CMD_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_encrypt_info_cmd
+**
+** Description      Build security information command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_encrypt_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_encrypt_info_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_ENC_INFO_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_ENCRYPT_INFO);
+        ARRAY_TO_STREAM (p, p_cb->ltk, BT_OCTET16_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_ENC_INFO_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_master_id_cmd
+**
+** Description      Build security information command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_master_id_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_master_id_cmd ");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_MASTER_ID_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_MASTER_ID);
+        UINT16_TO_STREAM (p, p_cb->ediv);
+        ARRAY_TO_STREAM (p, p_cb->enc_rand, BT_OCTET8_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_MASTER_ID_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_identity_info_cmd
+**
+** Description      Build identity information command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_identity_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    BT_OCTET16  irk;
+    SMP_TRACE_EVENT0("smp_build_identity_info_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_ID_INFO_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        BTM_GetDeviceIDRoot(irk);
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_IDENTITY_INFO);
+        ARRAY_TO_STREAM (p,  irk, BT_OCTET16_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_ID_INFO_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_id_addr_cmd
+**
+** Description      Build identity address information command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_id_addr_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    BT_OCTET16  irk;
+    SMP_TRACE_EVENT0("smp_build_id_addr_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_ID_ADDR_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        BTM_GetDeviceIDRoot(irk);
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_ID_ADDR);
+        UINT8_TO_STREAM (p, 0);     /* TODO: update with local address type */
+        BTM_ReadConnectionAddr(p_cb->local_bda);
+        BDADDR_TO_STREAM (p, p_cb->local_bda);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_ID_ADDR_SIZE;
+    }
+
+    return p_buf;
+}
+
+/*******************************************************************************
+**
+** Function         smp_build_signing_info_cmd
+**
+** Description      Build signing information command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_signing_info_cmd(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    //BT_OCTET16  srk; remove
+    SMP_TRACE_EVENT0("smp_build_signing_info_cmd");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_SIGN_INFO_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_SIGN_INFO);
+        ARRAY_TO_STREAM (p, p_cb->csrk, BT_OCTET16_LEN);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_SIGN_INFO_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_pairing_fail
+**
+** Description      Build Pairing Fail command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_pairing_fail(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_pairing_fail");
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + SMP_PAIR_FAIL_SIZE + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_PAIRING_FAILED);
+        UINT8_TO_STREAM (p, p_cb->failure);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = SMP_PAIR_FAIL_SIZE;
+    }
+
+    return p_buf;
+}
+/*******************************************************************************
+**
+** Function         smp_build_security_request
+**
+** Description      Build security request command.
+**
+*******************************************************************************/
+static BT_HDR * smp_build_security_request(UINT8 cmd_code, tSMP_CB *p_cb)
+{
+    BT_HDR      *p_buf = NULL ;
+    UINT8       *p;
+    SMP_TRACE_EVENT0("smp_build_security_request");
+
+    if ((p_buf = (BT_HDR *)GKI_getbuf(sizeof(BT_HDR) + 2 + L2CAP_MIN_OFFSET)) != NULL)
+    {
+        p = (UINT8 *)(p_buf + 1) + L2CAP_MIN_OFFSET;
+
+        UINT8_TO_STREAM (p, SMP_OPCODE_SEC_REQ);
+        UINT8_TO_STREAM (p,  p_cb->loc_auth_req);
+
+        p_buf->offset = L2CAP_MIN_OFFSET;
+        p_buf->len = 2;
+
+        SMP_TRACE_EVENT2("opcode=%d auth_req=0x%x",SMP_OPCODE_SEC_REQ,  p_cb->loc_auth_req );
+    }
+
+    return p_buf;
+
+}
+
+/*******************************************************************************
+**
+** Function         smp_convert_string_to_tk
+**
+** Description      This function is called to convert a 6 to 16 digits numeric
+**                  character string into SMP TK.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_convert_string_to_tk(BT_OCTET16 tk, UINT32 passkey)
+{
+    UINT8   *p = tk;
+    tSMP_KEY    key;
+    SMP_TRACE_EVENT0("smp_convert_string_to_tk");
+    UINT32_TO_STREAM(p, passkey);
+
+    key.key_type    = SMP_KEY_TYPE_TK;
+    key.p_data      = tk;
+
+    smp_sm_event(&smp_cb, SMP_KEY_READY_EVT, &key);
+}
+
+/*******************************************************************************
+**
+** Function         smp_mask_enc_key
+**
+** Description      This function is called to mask off the encryption key based
+**                  on the maximum encryption key size.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_mask_enc_key(UINT8 loc_enc_size, UINT8 * p_data)
+{
+    SMP_TRACE_EVENT0("smp_mask_enc_key");
+    if (loc_enc_size < BT_OCTET16_LEN)
+    {
+        for (; loc_enc_size < BT_OCTET16_LEN; loc_enc_size ++)
+            * (p_data + loc_enc_size) = 0;
+    }
+    return;
+}
+/*******************************************************************************
+**
+** Function         smp_xor_128
+**
+** Description      utility function to do an biteise exclusive-OR of two bit
+**                  strings of the length of BT_OCTET16_LEN.
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_xor_128(BT_OCTET16 a, BT_OCTET16 b)
+{
+    UINT8 i, *aa = a, *bb = b;
+
+    SMP_TRACE_EVENT0("smp_xor_128");
+    for (i = 0; i < BT_OCTET16_LEN; i++)
+    {
+        aa[i] = aa[i] ^ bb[i];
+    }
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_cb_cleanup
+**
+** Description      Clean up SMP control block
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_cb_cleanup(tSMP_CB   *p_cb)
+{
+    tSMP_CALLBACK   *p_callback = p_cb->p_callback;
+    UINT8           trace_level = p_cb->trace_level;
+
+    SMP_TRACE_EVENT0("smp_cb_cleanup");
+    memset(p_cb, 0, sizeof(tSMP_CB));
+    p_cb->p_callback = p_callback;
+    p_cb->trace_level = trace_level;
+}
+/*******************************************************************************
+**
+** Function         smp_reset_control_value
+**
+** Description      This function is called to reset the control block value when
+**                  pairing procedure finished.
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_reset_control_value(tSMP_CB *p_cb)
+{
+    SMP_TRACE_EVENT0("smp_reset_control_value");
+    btu_stop_timer (&p_cb->rsp_timer_ent);
+#if SMP_CONFORMANCE_TESTING == TRUE
+
+    SMP_TRACE_EVENT1("smp_cb.remove_fixed_channel_disable=%d", smp_cb.remove_fixed_channel_disable);
+    if (!smp_cb.remove_fixed_channel_disable)
+    {
+        L2CA_RemoveFixedChnl (L2CAP_SMP_CID, p_cb->pairing_bda);
+    }
+    else
+    {
+        SMP_TRACE_EVENT0("disable the removal of the fixed channel");
+    }
+
+
+#else
+    /* We can tell L2CAP to remove the fixed channel (if it has one) */
+    L2CA_RemoveFixedChnl (L2CAP_SMP_CID, p_cb->pairing_bda);
+
+#endif
+    smp_cb_cleanup(p_cb);
+
+}
+/*******************************************************************************
+**
+** Function         smp_proc_pairing_cmpl
+**
+** Description      This function is called to process pairing complete
+**
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_proc_pairing_cmpl(tSMP_CB *p_cb)
+{
+    tSMP_EVT_DATA   evt_data = {0};
+
+    SMP_TRACE_DEBUG0 ("smp_proc_pairing_cmpl ");
+
+    evt_data.cmplt.reason = p_cb->status;
+
+    if (p_cb->status == SMP_SUCCESS)
+        evt_data.cmplt.sec_level = p_cb->sec_level;
+
+    evt_data.cmplt.is_pair_cancel  = FALSE;
+
+    if (p_cb->is_pair_cancel)
+        evt_data.cmplt.is_pair_cancel = TRUE;
+
+
+    SMP_TRACE_DEBUG2 ("send SMP_COMPLT_EVT reason=0x%0x sec_level=0x%0x",
+                      evt_data.cmplt.reason,
+                      evt_data.cmplt.sec_level );
+    if (p_cb->p_callback)
+        (*p_cb->p_callback) (SMP_COMPLT_EVT, p_cb->pairing_bda, &evt_data);
+
+#if 0 /* TESTING CODE : as a master, reencrypt using LTK */
+    if (evt_data.cmplt.reason == 0 && p_cb->role == HCI_ROLE_MASTER)
+    {
+        btm_ble_start_encrypt(p_cb->pairing_bda, FALSE, NULL);
+    }
+#endif
+
+    smp_reset_control_value(p_cb);
+}
+
+#if SMP_CONFORMANCE_TESTING == TRUE
+/*******************************************************************************
+**
+** Function         smp_set_test_confirm_value
+**
+** Description      This function is called to set the test confirm value
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_set_test_confirm_value(BOOLEAN enable, UINT8 *p_c_val)
+{
+    SMP_TRACE_DEBUG1("smp_set_test_confirm_value enable=%d", enable);
+    smp_cb.enable_test_confirm_val = enable;
+    memcpy(smp_cb.test_confirm, p_c_val, BT_OCTET16_LEN);
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_set_test_confirm_value
+**
+** Description      This function is called to set the test rand value
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_set_test_rand_value(BOOLEAN enable, UINT8 *p_c_val)
+{
+    SMP_TRACE_DEBUG1("smp_set_test_rand_value enable=%d", enable);
+    smp_cb.enable_test_rand_val = enable;
+    memcpy(smp_cb.test_rand, p_c_val, BT_OCTET16_LEN);
+}
+
+
+/*******************************************************************************
+**
+** Function         smp_set_test_pair_fail_status
+**
+** Description      This function is called to set the test fairing fair status
+**
+** Returns          void
+**
+*******************************************************************************/
+void smp_set_test_pair_fail_status (BOOLEAN enable, UINT8 status)
+{
+    SMP_TRACE_DEBUG1("smp_set_test_confirm_value enable=%d", enable);
+    smp_cb.enable_test_pair_fail = enable;
+    smp_cb.pair_fail_status = status;
+}
+
+/*******************************************************************************
+**
+** Function         smp_set_test_pair_fail_status
+**
+** Description      This function is called to disable the removal of fixed channel
+**                  in  smp_reset_control_value
+** Returns          void
+**
+*******************************************************************************/
+void smp_remove_fixed_channel_disable (BOOLEAN disable)
+{
+    SMP_TRACE_DEBUG1("smp_remove_fixed_channel_disable disable =%d", disable);
+    smp_cb.remove_fixed_channel_disable = disable;
+}
+
+#endif
+
+
+#endif
+
diff --git a/test/Android.mk b/test/Android.mk
new file mode 100644
index 0000000..3c3cb61
--- /dev/null
+++ b/test/Android.mk
@@ -0,0 +1,3 @@
+ifneq ($(TARGET_SIMULATOR),true)
+  include $(call all-subdir-makefiles)
+endif
diff --git a/test/bluedroidtest/Android.mk b/test/bluedroidtest/Android.mk
new file mode 100644
index 0000000..0c6693a
--- /dev/null
+++ b/test/bluedroidtest/Android.mk
@@ -0,0 +1,39 @@
+#
+#  Copyright (C) 2009-2012 Broadcom Corporation
+#
+#  Licensed under the Apache License, Version 2.0 (the "License");
+#  you may not use this file except in compliance with the License.
+#  You may obtain a copy of the License at:
+#
+#  http://www.apache.org/licenses/LICENSE-2.0
+#
+#  Unless required by applicable law or agreed to in writing, software
+#  distributed under the License is distributed on an "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+#  See the License for the specific language governing permissions and
+#  limitations under the License.
+#
+
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES:=     \
+    bluedroidtest.c
+
+LOCAL_C_INCLUDES :=
+
+LOCAL_MODULE_TAGS := eng
+
+LOCAL_MODULE:= bdt
+
+LOCAL_LDLIBS += -lpthread -ldl -llog -lreadline
+LIBS_c += -lreadline
+
+LOCAL_SHARED_LIBRARIES += libcutils   \
+                          libutils    \
+                          libhardware \
+                          libhardware_legacy
+
+include $(BUILD_EXECUTABLE)
+
diff --git a/test/bluedroidtest/README.txt b/test/bluedroidtest/README.txt
new file mode 100644
index 0000000..a443a29
--- /dev/null
+++ b/test/bluedroidtest/README.txt
@@ -0,0 +1,73 @@
+Bluedroid Test Application
+==========================
+The test application provides a small console shell interface that allows
+access to the Bluetooth HAL API library though ASCII commands. This is similar
+to how the real JNI service would operate. The primary objective of this
+application is to allow Bluetooth to be put in DUT Mode for RF/BB BQB test purposes.
+
+This application is mutually exclusive with the Java based Bluetooth.apk. Hence
+before launching the application, it should be ensured that the Settings->Bluetooth is OFF.
+
+This application is built as 'bdt' and shall be available in '/system/bin/bdt'
+
+Limitations
+===========
+1.) Settings->Bluetooth must be OFF for this application to work
+2.) Currently, only the SIG 'HCI Test Mode' commands are supported. The vendor
+specific HCI test mode commands to be added.
+
+Usage instructions
+==================
+The following section describes the various commands and their usage
+
+Launching the test application
+==============================
+$ adb shell
+root@android:/ # /system/bin/bdt
+set_aid_and_cap : pid 1183, uid 0 gid 0
+:::::::::::::::::::::::::::::::::::::::::::::::::::
+:: Bluedroid test app starting
+Loading HAL lib + extensions
+HAL library loaded (Success)
+INIT BT
+HAL REQUEST SUCCESS
+
+Enabling Bluetooth
+==================
+>enable
+ENABLE BT
+HAL REQUEST SUCCESS
+>ADAPTER STATE UPDATED : ON
+
+Enabling Test Mode (Bluetooth must be enabled for this command to work)
+======================================================================
+>enable_test_mode
+ENABLE BT TEST MODE
+HAL REQUEST SUCCESS
+>
+
+Disabling Test Mode
+===================
+>disable_test_mode
+DISABLE BT TEST MODE
+HAL REQUEST SUCCESS
+
+Exit the test application
+=========================
+>quit
+shutdown bdroid test app
+Unloading HAL lib
+HAL library unloaded (Success)
+:: Bluedroid test app terminating
+
+Help (Lists the available commands)
+===================================
+>help
+help lists all available console commands
+
+quit
+enable :: enables bluetooth
+disable :: disables bluetooth
+enable_test_mode :: enters bluedroid test mode
+disable_test_mode :: exits bluedroid test mode
+
diff --git a/test/bluedroidtest/bluedroidtest.c b/test/bluedroidtest/bluedroidtest.c
new file mode 100644
index 0000000..130bc60
--- /dev/null
+++ b/test/bluedroidtest/bluedroidtest.c
@@ -0,0 +1,714 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      bluedroidtest.c
+ *
+ *  Description:   Bluedroid Test application
+ *
+ ***********************************************************************************/
+
+#include <stdio.h>
+#include <dlfcn.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <pthread.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <sys/prctl.h>
+#include <linux/capability.h>
+
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <netdb.h>
+
+#include <private/android_filesystem_config.h>
+#include <android/log.h>
+
+#include <hardware/hardware.h>
+#include <hardware/bluetooth.h>
+
+/************************************************************************************
+**  Constants & Macros
+************************************************************************************/
+
+#define PID_FILE "/data/.bdt_pid"
+
+#ifndef MAX
+#define MAX(x, y) ((x) > (y) ? (x) : (y))
+#endif
+
+#define CASE_RETURN_STR(const) case const: return #const;
+
+/************************************************************************************
+**  Local type definitions
+************************************************************************************/
+
+/************************************************************************************
+**  Static variables
+************************************************************************************/
+
+static unsigned char main_done = 0;
+static bt_status_t status;
+
+/* Main API */
+static bluetooth_device_t* bt_device;
+
+const bt_interface_t* sBtInterface = NULL;
+
+static gid_t groups[] = { AID_NET_BT, AID_INET, AID_NET_BT_ADMIN,
+                          AID_SYSTEM, AID_MISC, AID_SDCARD_RW,
+                          AID_NET_ADMIN, AID_VPN};
+
+/* Set to 1 when the Bluedroid stack is enabled */
+static unsigned char bt_enabled = 0;
+
+/************************************************************************************
+**  Static functions
+************************************************************************************/
+
+static void process_cmd(char *p, unsigned char is_job);
+static void job_handler(void *param);
+static void bdt_log(const char *fmt_str, ...);
+
+
+/************************************************************************************
+**  Externs
+************************************************************************************/
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+
+/************************************************************************************
+**  Shutdown helper functions
+************************************************************************************/
+
+static void bdt_shutdown(void)
+{
+    bdt_log("shutdown bdroid test app\n");
+    main_done = 1;
+}
+
+
+/*****************************************************************************
+** Android's init.rc does not yet support applying linux capabilities
+*****************************************************************************/
+
+static void config_permissions(void)
+{
+    struct __user_cap_header_struct header;
+    struct __user_cap_data_struct cap;
+
+    bdt_log("set_aid_and_cap : pid %d, uid %d gid %d", getpid(), getuid(), getgid());
+
+    header.pid = 0;
+
+    prctl(PR_SET_KEEPCAPS, 1, 0, 0, 0);
+
+    setuid(AID_BLUETOOTH);
+    setgid(AID_BLUETOOTH);
+
+    header.version = _LINUX_CAPABILITY_VERSION;
+
+    cap.effective = cap.permitted =  cap.inheritable =
+                    1 << CAP_NET_RAW |
+                    1 << CAP_NET_ADMIN |
+                    1 << CAP_NET_BIND_SERVICE |
+                    1 << CAP_SYS_RAWIO |
+                    1 << CAP_SYS_NICE |
+                    1 << CAP_SETGID;
+
+    capset(&header, &cap);
+    setgroups(sizeof(groups)/sizeof(groups[0]), groups);
+}
+
+
+
+/*****************************************************************************
+**   Logger API
+*****************************************************************************/
+
+void bdt_log(const char *fmt_str, ...)
+{
+    static char buffer[1024];
+    va_list ap;
+
+    va_start(ap, fmt_str);
+    vsnprintf(buffer, 1024, fmt_str, ap);
+    va_end(ap);
+
+    fprintf(stdout, "%s\n", buffer);
+}
+
+/*******************************************************************************
+ ** Misc helper functions
+ *******************************************************************************/
+static const char* dump_bt_status(bt_status_t status)
+{
+    switch(status)
+    {
+        CASE_RETURN_STR(BT_STATUS_SUCCESS)
+        CASE_RETURN_STR(BT_STATUS_FAIL)
+        CASE_RETURN_STR(BT_STATUS_NOT_READY)
+        CASE_RETURN_STR(BT_STATUS_NOMEM)
+        CASE_RETURN_STR(BT_STATUS_BUSY)
+        CASE_RETURN_STR(BT_STATUS_UNSUPPORTED)
+
+        default:
+            return "unknown status code";
+    }
+}
+
+static void hex_dump(char *msg, void *data, int size, int trunc)
+{
+    unsigned char *p = data;
+    unsigned char c;
+    int n;
+    char bytestr[4] = {0};
+    char addrstr[10] = {0};
+    char hexstr[ 16*3 + 5] = {0};
+    char charstr[16*1 + 5] = {0};
+
+    bdt_log("%s  \n", msg);
+
+    /* truncate */
+    if(trunc && (size>32))
+        size = 32;
+
+    for(n=1;n<=size;n++) {
+        if (n%16 == 1) {
+            /* store address for this line */
+            snprintf(addrstr, sizeof(addrstr), "%.4x",
+               ((unsigned int)p-(unsigned int)data) );
+        }
+
+        c = *p;
+        if (isalnum(c) == 0) {
+            c = '.';
+        }
+
+        /* store hex str (for left side) */
+        snprintf(bytestr, sizeof(bytestr), "%02X ", *p);
+        strncat(hexstr, bytestr, sizeof(hexstr)-strlen(hexstr)-1);
+
+        /* store char str (for right side) */
+        snprintf(bytestr, sizeof(bytestr), "%c", c);
+        strncat(charstr, bytestr, sizeof(charstr)-strlen(charstr)-1);
+
+        if(n%16 == 0) {
+            /* line completed */
+            bdt_log("[%4.4s]   %-50.50s  %s\n", addrstr, hexstr, charstr);
+            hexstr[0] = 0;
+            charstr[0] = 0;
+        } else if(n%8 == 0) {
+            /* half line: add whitespaces */
+            strncat(hexstr, "  ", sizeof(hexstr)-strlen(hexstr)-1);
+            strncat(charstr, " ", sizeof(charstr)-strlen(charstr)-1);
+        }
+        p++; /* next byte */
+    }
+
+    if (strlen(hexstr) > 0) {
+        /* print rest of buffer if not empty */
+        bdt_log("[%4.4s]   %-50.50s  %s\n", addrstr, hexstr, charstr);
+    }
+}
+
+/*******************************************************************************
+ ** Console helper functions
+ *******************************************************************************/
+
+void skip_blanks(char **p)
+{
+  while (**p == ' ')
+    (*p)++;
+}
+
+uint32_t get_int(char **p, int DefaultValue)
+{
+  uint32_t Value = 0;
+  unsigned char   UseDefault;
+
+  UseDefault = 1;
+  skip_blanks(p);
+
+  while ( ((**p)<= '9' && (**p)>= '0') )
+    {
+      Value = Value * 10 + (**p) - '0';
+      UseDefault = 0;
+      (*p)++;
+    }
+
+  if (UseDefault)
+    return DefaultValue;
+  else
+    return Value;
+}
+
+int get_signed_int(char **p, int DefaultValue)
+{
+  int    Value = 0;
+  unsigned char   UseDefault;
+  unsigned char  NegativeNum = 0;
+
+  UseDefault = 1;
+  skip_blanks(p);
+
+  if ( (**p) == '-')
+    {
+      NegativeNum = 1;
+      (*p)++;
+    }
+  while ( ((**p)<= '9' && (**p)>= '0') )
+    {
+      Value = Value * 10 + (**p) - '0';
+      UseDefault = 0;
+      (*p)++;
+    }
+
+  if (UseDefault)
+    return DefaultValue;
+  else
+    return ((NegativeNum == 0)? Value : -Value);
+}
+
+void get_str(char **p, char *Buffer)
+{
+  skip_blanks(p);
+
+  while (**p != 0 && **p != ' ')
+    {
+      *Buffer = **p;
+      (*p)++;
+      Buffer++;
+    }
+
+  *Buffer = 0;
+}
+
+uint32_t get_hex(char **p, int DefaultValue)
+{
+  uint32_t Value = 0;
+  unsigned char   UseDefault;
+
+  UseDefault = 1;
+  skip_blanks(p);
+
+  while ( ((**p)<= '9' && (**p)>= '0') ||
+          ((**p)<= 'f' && (**p)>= 'a') ||
+          ((**p)<= 'F' && (**p)>= 'A') )
+    {
+      if (**p >= 'a')
+        Value = Value * 16 + (**p) - 'a' + 10;
+      else if (**p >= 'A')
+        Value = Value * 16 + (**p) - 'A' + 10;
+      else
+        Value = Value * 16 + (**p) - '0';
+      UseDefault = 0;
+      (*p)++;
+    }
+
+  if (UseDefault)
+    return DefaultValue;
+  else
+    return Value;
+}
+
+void get_bdaddr(const char *str, bt_bdaddr_t *bd) {
+    char *d = ((char *)bd), *endp;
+    int i;
+    for(i = 0; i < 6; i++) {
+        *d++ = strtol(str, &endp, 16);
+        if (*endp != ':' && i != 5) {
+            memset(bd, 0, sizeof(bt_bdaddr_t));
+            return;
+        }
+        str = endp + 1;
+    }
+}
+
+#define is_cmd(str) ((strlen(str) == strlen(cmd)) && strncmp((const char *)&cmd, str, strlen(str)) == 0)
+#define if_cmd(str)  if (is_cmd(str))
+
+typedef void (t_console_cmd_handler) (char *p);
+
+typedef struct {
+    const char *name;
+    t_console_cmd_handler *handler;
+    const char *help;
+    unsigned char is_job;
+} t_cmd;
+
+
+const t_cmd console_cmd_list[];
+static int console_cmd_maxlen = 0;
+
+static void cmdjob_handler(void *param)
+{
+    char *job_cmd = (char*)param;
+
+    bdt_log("cmdjob starting (%s)", job_cmd);
+
+    process_cmd(job_cmd, 1);
+
+    bdt_log("cmdjob terminating");
+
+    free(job_cmd);
+}
+
+static int create_cmdjob(char *cmd)
+{
+    pthread_t thread_id;
+    char *job_cmd;
+
+    job_cmd = malloc(strlen(cmd)+1); /* freed in job handler */
+    strcpy(job_cmd, cmd);
+
+    if (pthread_create(&thread_id, NULL,
+                       (void*)cmdjob_handler, (void*)job_cmd)!=0)
+      perror("pthread_create");
+
+    return 0;
+}
+
+/*******************************************************************************
+ ** Load stack lib
+ *******************************************************************************/
+
+int HAL_load(void)
+{
+    int err = 0;
+
+    hw_module_t* module;
+    hw_device_t* device;
+
+    bdt_log("Loading HAL lib + extensions");
+
+    err = hw_get_module(BT_HARDWARE_MODULE_ID, (hw_module_t const**)&module);
+    if (err == 0)
+    {
+        err = module->methods->open(module, BT_HARDWARE_MODULE_ID, &device);
+        if (err == 0) {
+            bt_device = (bluetooth_device_t *)device;
+            sBtInterface = bt_device->get_bluetooth_interface();
+        }
+    }
+
+    bdt_log("HAL library loaded (%s)", strerror(err));
+
+    return err;
+}
+
+int HAL_unload(void)
+{
+    int err = 0;
+
+    bdt_log("Unloading HAL lib");
+
+    sBtInterface = NULL;
+
+    bdt_log("HAL library unloaded (%s)", strerror(err));
+
+    return err;
+}
+
+/*******************************************************************************
+ ** HAL test functions & callbacks
+ *******************************************************************************/
+
+void setup_test_env(void)
+{
+    int i = 0;
+
+    while (console_cmd_list[i].name != NULL)
+    {
+        console_cmd_maxlen = MAX(console_cmd_maxlen, (int)strlen(console_cmd_list[i].name));
+        i++;
+    }
+}
+
+void check_return_status(bt_status_t status)
+{
+    if (status != BT_STATUS_SUCCESS)
+    {
+        bdt_log("HAL REQUEST FAILED status : %d (%s)", status, dump_bt_status(status));
+    }
+    else
+    {
+        bdt_log("HAL REQUEST SUCCESS");
+    }
+}
+
+static void adapter_state_changed(bt_state_t state)
+{
+    bdt_log("ADAPTER STATE UPDATED : %s", (state == BT_STATE_OFF)?"OFF":"ON");
+    if (state == BT_STATE_ON) {
+        bt_enabled = 1;
+    } else {
+        bt_enabled = 0;
+    }
+}
+
+static void dut_mode_recv(uint16_t opcode, uint8_t *buf, uint8_t len)
+{
+    bdt_log("DUT MODE RECV : NOT IMPLEMENTED");
+}
+
+static bt_callbacks_t bt_callbacks = {
+    sizeof(bt_callbacks_t),
+    adapter_state_changed,
+    NULL, /*adapter_properties_cb */
+    NULL, /* remote_device_properties_cb */
+    NULL, /* device_found_cb */
+    NULL, /* discovery_state_changed_cb */
+    NULL, /* pin_request_cb  */
+    NULL, /* ssp_request_cb  */
+    NULL, /*bond_state_changed_cb */
+    NULL, /* acl_state_changed_cb */
+    NULL, /* thread_evt_cb */
+    dut_mode_recv, /*dut_mode_recv_cb */
+};
+
+void bdt_init(void)
+{
+    bdt_log("INIT BT ");
+    status = sBtInterface->init(&bt_callbacks);
+    check_return_status(status);
+}
+
+void bdt_enable(void)
+{
+    bdt_log("ENABLE BT");
+    if (bt_enabled) {
+        bdt_log("Bluetooth is already enabled");
+        return;
+    }
+    status = sBtInterface->enable();
+
+    check_return_status(status);
+}
+
+void bdt_disable(void)
+{
+    bdt_log("DISABLE BT");
+    if (!bt_enabled) {
+        bdt_log("Bluetooth is already disabled");
+        return;
+    }
+    status = sBtInterface->disable();
+
+    check_return_status(status);
+}
+void bdt_dut_mode_configure(char *p)
+{
+    int32_t mode = -1;
+
+    bdt_log("BT DUT MODE CONFIGURE");
+    if (!bt_enabled) {
+        bdt_log("Bluetooth must be enabled for test_mode to work.");
+        return;
+    }
+    mode = get_signed_int(&p, mode);
+    if ((mode != 0) && (mode != 1)) {
+        bdt_log("Please specify mode: 1 to enter, 0 to exit");
+        return;
+    }
+    status = sBtInterface->dut_mode_configure(mode);
+
+    check_return_status(status);
+}
+
+void bdt_cleanup(void)
+{
+    bdt_log("CLEANUP");
+    sBtInterface->cleanup();
+}
+
+/*******************************************************************************
+ ** Console commands
+ *******************************************************************************/
+
+void do_help(char *p)
+{
+    int i = 0;
+    int max = 0;
+    char line[128];
+    int pos = 0;
+
+    while (console_cmd_list[i].name != NULL)
+    {
+        pos = sprintf(line, "%s", (char*)console_cmd_list[i].name);
+        bdt_log("%s %s\n", (char*)line, (char*)console_cmd_list[i].help);
+        i++;
+    }
+}
+
+void do_quit(char *p)
+{
+    bdt_shutdown();
+}
+
+/*******************************************************************
+ *
+ *  BT TEST  CONSOLE COMMANDS
+ *
+ *  Parses argument lists and passes to API test function
+ *
+*/
+
+void do_init(char *p)
+{
+    bdt_init();
+}
+
+void do_enable(char *p)
+{
+    bdt_enable();
+}
+
+void do_disable(char *p)
+{
+    bdt_disable();
+}
+void do_dut_mode_configure(char *p)
+{
+    bdt_dut_mode_configure(p);
+}
+
+void do_cleanup(char *p)
+{
+    bdt_cleanup();
+}
+
+/*******************************************************************
+ *
+ *  CONSOLE COMMAND TABLE
+ *
+*/
+
+const t_cmd console_cmd_list[] =
+{
+    /*
+     * INTERNAL
+     */
+
+    { "help", do_help, "lists all available console commands", 0 },
+    { "quit", do_quit, "", 0},
+
+    /*
+     * API CONSOLE COMMANDS
+     */
+
+     /* Init and Cleanup shall be called automatically */
+    { "enable", do_enable, ":: enables bluetooth", 0 },
+    { "disable", do_disable, ":: disables bluetooth", 0 },
+    { "dut_mode_configure", do_dut_mode_configure, ":: DUT mode - 1 to enter,0 to exit", 0 },
+
+    /* add here */
+
+    /* last entry */
+    {NULL, NULL, "", 0},
+};
+
+/*
+ * Main console command handler
+*/
+
+static void process_cmd(char *p, unsigned char is_job)
+{
+    char cmd[64];
+    int i = 0;
+    char *p_saved = p;
+
+    get_str(&p, cmd);
+
+    /* table commands */
+    while (console_cmd_list[i].name != NULL)
+    {
+        if (is_cmd(console_cmd_list[i].name))
+        {
+            if (!is_job && console_cmd_list[i].is_job)
+                create_cmdjob(p_saved);
+            else
+            {
+                console_cmd_list[i].handler(p);
+            }
+            return;
+        }
+        i++;
+    }
+    bdt_log("%s : unknown command\n", p_saved);
+    do_help(NULL);
+}
+
+int main (int argc, char * argv[])
+{
+    int opt;
+    char cmd[128];
+    int args_processed = 0;
+    int pid = -1;
+
+    config_permissions();
+    bdt_log("\n:::::::::::::::::::::::::::::::::::::::::::::::::::");
+    bdt_log(":: Bluedroid test app starting");
+
+    if ( HAL_load() < 0 ) {
+        perror("HAL failed to initialize, exit\n");
+        unlink(PID_FILE);
+        exit(0);
+    }
+
+    setup_test_env();
+
+    /* Automatically perform the init */
+    bdt_init();
+
+    while(!main_done)
+    {
+        char line[128];
+
+        /* command prompt */
+        printf( ">" );
+        fflush(stdout);
+
+        fgets (line, 128, stdin);
+
+        if (line[0]!= '\0')
+        {
+            /* remove linefeed */
+            line[strlen(line)-1] = 0;
+
+            process_cmd(line, 0);
+            memset(line, '\0', 128);
+        }
+    }
+
+    /* FIXME: Commenting this out as for some reason, the application does not exit otherwise*/
+    //bdt_cleanup();
+
+    HAL_unload();
+
+    bdt_log(":: Bluedroid test app terminating");
+
+    return 0;
+}
diff --git a/tools/gen-buildcfg.sh b/tools/gen-buildcfg.sh
new file mode 100755
index 0000000..a09cb20
--- /dev/null
+++ b/tools/gen-buildcfg.sh
@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+
+if [[ "" == "$2" ]]
+then
+    echo "Usage: $0 <in-file> <out-file>"
+    exit 1
+fi
+
+if [ ! -f "$1" ]
+then
+    echo "Error: Can't find input file $1..."
+    exit 2
+fi
+
+DATE=`/usr/bin/env date`
+BASE=`basename $2`
+BASE=`echo ${BASE} | tr "[:lower:]" "[:upper:]"`
+BASE=`echo ${BASE} | sed -e "s/\\./_/"`
+PROTECT="_${BASE}"
+
+echo "/* Auto-generated from $1 on ${DATE} */" > $2
+echo "#ifndef ${PROTECT}" >> $2
+echo "#define ${PROTECT}" >> $2
+sed -e '/^#/d' -e '/^$$/d' -e '/# Makefile only$$/d' -e 's/^/#define /' -e 's/=/ /' $1 >> $2
+echo "#endif" >> $2
+
diff --git a/udrv/include/uipc.h b/udrv/include/uipc.h
new file mode 100644
index 0000000..37d508c
--- /dev/null
+++ b/udrv/include/uipc.h
@@ -0,0 +1,149 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2007-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef UIPC_H
+#define UIPC_H
+
+#ifndef UDRV_API
+#define UDRV_API
+#endif
+
+#define UIPC_CH_ID_AV_CTRL  0
+#define UIPC_CH_ID_AV_AUDIO 1
+#define UIPC_CH_NUM         2
+
+#define UIPC_CH_ID_ALL      3   /* used to address all the ch id at once */
+
+#define DEFAULT_READ_POLL_TMO_MS 100
+
+typedef UINT8 tUIPC_CH_ID;
+
+/* Events generated */
+typedef enum {
+    UIPC_OPEN_EVT           = 0x0001,
+    UIPC_CLOSE_EVT          = 0x0002,
+    UIPC_RX_DATA_EVT        = 0x0004,
+    UIPC_RX_DATA_READY_EVT  = 0x0008,
+    UIPC_TX_DATA_READY_EVT  = 0x0010
+} tUIPC_EVENT;
+
+/*
+ * UIPC IOCTL Requests
+ */
+
+#define UIPC_REQ_RX_FLUSH               1
+#define UIPC_REG_CBACK                  2
+#define UIPC_REG_REMOVE_ACTIVE_READSET  3
+#define UIPC_SET_READ_POLL_TMO          4
+
+typedef void (tUIPC_RCV_CBACK)(tUIPC_CH_ID ch_id, tUIPC_EVENT event); /* points to BT_HDR which describes event type and length of data; len contains the number of bytes of entire message (sizeof(BT_HDR) + offset + size of data) */
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+const char* dump_uipc_event(tUIPC_EVENT event);
+
+
+/*******************************************************************************
+**
+** Function         UIPC_Init
+**
+** Description      Initialize UIPC module
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern void UIPC_Init(void *);
+
+/*******************************************************************************
+**
+** Function         UIPC_Open
+**
+** Description      Open UIPC interface
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern BOOLEAN UIPC_Open(tUIPC_CH_ID ch_id, tUIPC_RCV_CBACK *p_cback);
+
+/*******************************************************************************
+**
+** Function         UIPC_Close
+**
+** Description      Close UIPC interface
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern void UIPC_Close(tUIPC_CH_ID ch_id);
+
+/*******************************************************************************
+**
+** Function         UIPC_SendBuf
+**
+** Description      Called to transmit a message over UIPC.
+**                  Message buffer will be freed by UIPC_SendBuf.
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern BOOLEAN UIPC_SendBuf(tUIPC_CH_ID ch_id, BT_HDR *p_msg);
+
+/*******************************************************************************
+**
+** Function         UIPC_Send
+**
+** Description      Called to transmit a message over UIPC.
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern BOOLEAN UIPC_Send(tUIPC_CH_ID ch_id, UINT16 msg_evt, UINT8 *p_buf, UINT16 msglen);
+
+/*******************************************************************************
+**
+** Function         UIPC_Read
+**
+** Description      Called to read a message from UIPC.
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern UINT32 UIPC_Read(tUIPC_CH_ID ch_id, UINT16 *p_msg_evt, UINT8 *p_buf, UINT32 len);
+
+/*******************************************************************************
+**
+** Function         UIPC_Ioctl
+**
+** Description      Called to control UIPC.
+**
+** Returns          void
+**
+*******************************************************************************/
+UDRV_API extern BOOLEAN UIPC_Ioctl(tUIPC_CH_ID ch_id, UINT32 request, void *param);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif  /* UIPC_H */
+
+
diff --git a/udrv/ulinux/uipc.c b/udrv/ulinux/uipc.c
new file mode 100644
index 0000000..9bb44df
--- /dev/null
+++ b/udrv/ulinux/uipc.c
@@ -0,0 +1,894 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/*****************************************************************************
+ *
+ *  Filename:      uipc.c
+ *
+ *  Description:   UIPC implementation for bluedroid
+ *
+ *****************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <signal.h>
+#include <errno.h>
+#include <pthread.h>
+#include <sys/select.h>
+#include <sys/poll.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/prctl.h>
+
+
+#include "gki.h"
+#include "data_types.h"
+#include "uipc.h"
+
+#include <cutils/sockets.h>
+#include "audio_a2dp_hw.h"
+
+/*****************************************************************************
+**  Constants & Macros
+******************************************************************************/
+
+#define PCM_FILENAME "/data/test.pcm"
+
+#define MAX(a,b) ((a)>(b)?(a):(b))
+
+#define CASE_RETURN_STR(const) case const: return #const;
+
+#define UIPC_DISCONNECTED (-1)
+
+#define UIPC_LOCK() /*BTIF_TRACE_EVENT1(" %s lock", __FUNCTION__);*/ pthread_mutex_lock(&uipc_main.mutex);
+#define UIPC_UNLOCK() /*BTIF_TRACE_EVENT1("%s unlock", __FUNCTION__);*/ pthread_mutex_unlock(&uipc_main.mutex);
+
+/*****************************************************************************
+**  Local type definitions
+******************************************************************************/
+
+typedef enum {
+    UIPC_TASK_FLAG_DISCONNECT_CHAN = 0x1,
+} tUIPC_TASK_FLAGS;
+
+typedef struct {
+    int srvfd;
+    int fd;
+    int read_poll_tmo_ms;
+    int task_evt_flags;   /* event flags pending to be processed in read task */
+    tUIPC_EVENT cond_flags;
+    pthread_mutex_t cond_mutex;
+    pthread_cond_t  cond;
+    tUIPC_RCV_CBACK *cback;
+} tUIPC_CHAN;
+
+typedef struct {
+    pthread_t tid; /* main thread id */
+    int running;
+    pthread_mutex_t mutex;
+
+    fd_set active_set;
+    fd_set read_set;
+    int max_fd;
+    int signal_fds[2];
+
+    tUIPC_CHAN ch[UIPC_CH_NUM];
+} tUIPC_MAIN;
+
+
+/*****************************************************************************
+**  Static variables
+******************************************************************************/
+
+static tUIPC_MAIN uipc_main;
+
+
+/*****************************************************************************
+**  Static functions
+******************************************************************************/
+
+static int uipc_close_ch_locked(tUIPC_CH_ID ch_id);
+
+/*****************************************************************************
+**  Externs
+******************************************************************************/
+
+
+/*****************************************************************************
+**   Helper functions
+******************************************************************************/
+
+
+const char* dump_uipc_event(tUIPC_EVENT event)
+{
+    switch(event)
+    {
+        CASE_RETURN_STR(UIPC_OPEN_EVT)
+        CASE_RETURN_STR(UIPC_CLOSE_EVT)
+        CASE_RETURN_STR(UIPC_RX_DATA_EVT)
+        CASE_RETURN_STR(UIPC_RX_DATA_READY_EVT)
+        CASE_RETURN_STR(UIPC_TX_DATA_READY_EVT)
+        default:
+            return "UNKNOWN MSG ID";
+    }
+}
+
+/*****************************************************************************
+**
+** Function
+**
+** Description
+**
+** Returns
+**
+*******************************************************************************/
+
+static void uipc_wait(tUIPC_CH_ID ch_id, tUIPC_EVENT wait_event_flags)
+{
+    int ret;
+    tUIPC_CHAN *p = &uipc_main.ch[ch_id];
+
+    //BTIF_TRACE_EVENT2("WAIT UIPC CH %d EVT %x BEGIN", ch_id, wait_event_flags);
+    pthread_mutex_lock(&p->cond_mutex);
+    p->cond_flags |= wait_event_flags;
+    ret = pthread_cond_wait(&p->cond, &p->cond_mutex);
+    pthread_mutex_unlock(&p->cond_mutex);
+    //BTIF_TRACE_EVENT2("WAIT UIPC CH %d EVT %x DONE", ch_id, wait_event_flags);
+}
+
+static void uipc_signal(tUIPC_CH_ID ch_id, tUIPC_EVENT event)
+{
+    int ret;
+    tUIPC_CHAN *p = &uipc_main.ch[ch_id];
+
+    //BTIF_TRACE_EVENT2("SIGNAL UIPC CH %d EVT %x BEGIN", ch_id, dump_uipc_event(event));
+    pthread_mutex_lock(&p->cond_mutex);
+
+    if (event & p->cond_flags)
+    {
+        //BTIF_TRACE_EVENT0("UNBLOCK");
+        ret = pthread_cond_signal(&p->cond);
+        p->cond_flags = 0;
+    }
+
+    pthread_mutex_unlock(&p->cond_mutex);
+}
+
+
+
+/*****************************************************************************
+**   socket helper functions
+*****************************************************************************/
+
+static inline int create_server_socket(const char* name)
+{
+    int s = socket(AF_LOCAL, SOCK_STREAM, 0);
+
+    BTIF_TRACE_EVENT1("create_server_socket %s", name);
+
+    if(socket_local_server_bind(s, name, ANDROID_SOCKET_NAMESPACE_ABSTRACT) < 0)
+    {
+        BTIF_TRACE_EVENT1("socket failed to create (%s)", strerror(errno));
+        return -1;
+    }
+
+    if(listen(s, 5) < 0)
+    {
+        BTIF_TRACE_EVENT1("listen failed", strerror(errno));
+        close(s);
+        return -1;
+    }
+
+    BTIF_TRACE_EVENT1("created socket fd %d", s);
+    return s;
+}
+
+static int accept_server_socket(int sfd)
+{
+    struct sockaddr_un remote;
+    struct pollfd pfd;
+    int fd;
+    int len = sizeof(struct sockaddr_un);
+
+    BTIF_TRACE_EVENT1("accept fd %d", sfd);
+
+    /* make sure there is data to process */
+    pfd.fd = sfd;
+    pfd.events = POLLIN;
+
+    if (poll(&pfd, 1, 0) == 0)
+    {
+        BTIF_TRACE_EVENT0("accept poll timeout");
+        return -1;
+    }
+
+    //BTIF_TRACE_EVENT1("poll revents 0x%x", pfd.revents);
+
+    if ((fd = accept(sfd, (struct sockaddr *)&remote, &len)) == -1)
+    {
+         BTIF_TRACE_ERROR1("sock accept failed (%s)", strerror(errno));
+         return -1;
+    }
+
+    //BTIF_TRACE_EVENT1("new fd %d", fd);
+
+    return fd;
+}
+
+/*****************************************************************************
+**
+**   uipc helper functions
+**
+*****************************************************************************/
+
+static int uipc_main_init(void)
+{
+    int i;
+    const pthread_mutexattr_t attr = PTHREAD_MUTEX_RECURSIVE;
+    pthread_mutex_init(&uipc_main.mutex, &attr);
+
+    BTIF_TRACE_EVENT0("### uipc_main_init ###");
+
+    /* setup interrupt socket pair */
+    if (socketpair(AF_UNIX, SOCK_STREAM, 0, uipc_main.signal_fds) < 0)
+    {
+        return -1;
+    }
+
+    FD_SET(uipc_main.signal_fds[0], &uipc_main.active_set);
+    uipc_main.max_fd = MAX(uipc_main.max_fd, uipc_main.signal_fds[0]);
+
+    for (i=0; i< UIPC_CH_NUM; i++)
+    {
+        tUIPC_CHAN *p = &uipc_main.ch[i];
+        p->srvfd = UIPC_DISCONNECTED;
+        p->fd = UIPC_DISCONNECTED;
+        p->task_evt_flags = 0;
+        pthread_cond_init(&p->cond, NULL);
+        pthread_mutex_init(&p->cond_mutex, NULL);
+        p->cback = NULL;
+    }
+
+    return 0;
+}
+
+void uipc_main_cleanup(void)
+{
+    int i;
+
+    BTIF_TRACE_EVENT0("uipc_main_cleanup");
+
+    close(uipc_main.signal_fds[0]);
+    close(uipc_main.signal_fds[1]);
+
+    /* close any open channels */
+    for (i=0; i<UIPC_CH_NUM; i++)
+        uipc_close_ch_locked(i);
+}
+
+
+
+/* check pending events in read task */
+static void uipc_check_task_flags_locked(void)
+{
+    int i;
+
+    for (i=0; i<UIPC_CH_NUM; i++)
+    {
+        //BTIF_TRACE_EVENT2("CHECK TASK FLAGS %x %x",  uipc_main.ch[i].task_evt_flags, UIPC_TASK_FLAG_DISCONNECT_CHAN);
+        if (uipc_main.ch[i].task_evt_flags & UIPC_TASK_FLAG_DISCONNECT_CHAN)
+        {
+            uipc_main.ch[i].task_evt_flags &= ~UIPC_TASK_FLAG_DISCONNECT_CHAN;
+            uipc_close_ch_locked(i);
+        }
+
+        /* add here */
+
+    }
+}
+
+
+static int uipc_check_fd_locked(tUIPC_CH_ID ch_id)
+{
+    if (ch_id >= UIPC_CH_NUM)
+        return -1;
+
+    //BTIF_TRACE_EVENT2("CHECK SRVFD %d (ch %d)", uipc_main.ch[ch_id].srvfd, ch_id);
+
+    if (FD_ISSET(uipc_main.ch[ch_id].srvfd, &uipc_main.read_set))
+    {
+        BTIF_TRACE_EVENT1("INCOMING CONNECTION ON CH %d", ch_id);
+
+        uipc_main.ch[ch_id].fd = accept_server_socket(uipc_main.ch[ch_id].srvfd);
+
+        BTIF_TRACE_EVENT1("NEW FD %d", uipc_main.ch[ch_id].fd);
+
+        if ((uipc_main.ch[ch_id].fd > 0) && uipc_main.ch[ch_id].cback)
+        {
+            /*  if we have a callback we should add this fd to the active set
+                and notify user with callback event */
+            BTIF_TRACE_EVENT1("ADD FD %d TO ACTIVE SET", uipc_main.ch[ch_id].fd);
+            FD_SET(uipc_main.ch[ch_id].fd, &uipc_main.active_set);
+            uipc_main.max_fd = MAX(uipc_main.max_fd, uipc_main.ch[ch_id].fd);
+        }
+
+        if (uipc_main.ch[ch_id].fd < 0)
+        {
+            BTIF_TRACE_ERROR2("FAILED TO ACCEPT CH %d (%s)", ch_id, strerror(errno));
+            return -1;
+        }
+
+        if (uipc_main.ch[ch_id].cback)
+            uipc_main.ch[ch_id].cback(ch_id, UIPC_OPEN_EVT);
+    }
+
+    //BTIF_TRACE_EVENT2("CHECK FD %d (ch %d)", uipc_main.ch[ch_id].fd, ch_id);
+
+    if (FD_ISSET(uipc_main.ch[ch_id].fd, &uipc_main.read_set))
+    {
+        //BTIF_TRACE_EVENT1("INCOMING DATA ON CH %d", ch_id);
+
+        if (uipc_main.ch[ch_id].cback)
+            uipc_main.ch[ch_id].cback(ch_id, UIPC_RX_DATA_READY_EVT);
+    }
+    return 0;
+}
+
+static void uipc_check_interrupt_locked(void)
+{
+    if (FD_ISSET(uipc_main.signal_fds[0], &uipc_main.read_set))
+    {
+        char sig_recv = 0;
+        //BTIF_TRACE_EVENT0("UIPC INTERRUPT");
+        recv(uipc_main.signal_fds[0], &sig_recv, sizeof(sig_recv), MSG_WAITALL);
+    }
+}
+
+static inline void uipc_wakeup_locked(void)
+{
+    char sig_on = 1;
+    BTIF_TRACE_EVENT0("UIPC SEND WAKE UP");
+    send(uipc_main.signal_fds[1], &sig_on, sizeof(sig_on), 0);
+}
+
+static int uipc_setup_server_locked(tUIPC_CH_ID ch_id, char *name, tUIPC_RCV_CBACK *cback)
+{
+    int fd;
+
+    BTIF_TRACE_EVENT1("SETUP CHANNEL SERVER %d", ch_id);
+
+    if (ch_id >= UIPC_CH_NUM)
+        return -1;
+
+    UIPC_LOCK();
+
+    fd = create_server_socket(name);
+
+    if (fd < 0)
+    {
+        BTIF_TRACE_ERROR2("failed to setup %s", name, strerror(errno));
+        UIPC_UNLOCK();
+         return -1;
+    }
+
+    BTIF_TRACE_EVENT1("ADD SERVER FD TO ACTIVE SET %d", fd);
+    FD_SET(fd, &uipc_main.active_set);
+    uipc_main.max_fd = MAX(uipc_main.max_fd, fd);
+
+    uipc_main.ch[ch_id].srvfd = fd;
+    uipc_main.ch[ch_id].cback = cback;
+    uipc_main.ch[ch_id].read_poll_tmo_ms = DEFAULT_READ_POLL_TMO_MS;
+
+    /* trigger main thread to update read set */
+    uipc_wakeup_locked();
+
+    UIPC_UNLOCK();
+
+    return 0;
+}
+
+static void uipc_flush_ch_locked(tUIPC_CH_ID ch_id)
+{
+    char buf;
+    struct pollfd pfd;
+    int ret;
+
+    pfd.events = POLLIN|POLLHUP;
+    pfd.fd = uipc_main.ch[ch_id].fd;
+
+    if (uipc_main.ch[ch_id].fd == UIPC_DISCONNECTED)
+        return;
+
+    while (1)
+    {
+        ret = poll(&pfd, 1, 1);
+        BTIF_TRACE_EVENT3("uipc_flush_ch_locked polling : fd %d, rxev %x, ret %d", pfd.fd, pfd.revents, ret);
+
+        if (pfd.revents | (POLLERR|POLLHUP))
+            return;
+
+        if (ret <= 0)
+        {
+            BTIF_TRACE_EVENT1("uipc_flush_ch_locked : error (%d)", ret);
+            return;
+        }
+        read(pfd.fd, &buf, 1);
+    }
+}
+
+
+static void uipc_flush_locked(tUIPC_CH_ID ch_id)
+{
+    if (ch_id >= UIPC_CH_NUM)
+        return;
+
+    switch(ch_id)
+    {
+        case UIPC_CH_ID_AV_CTRL:
+            uipc_flush_ch_locked(UIPC_CH_ID_AV_CTRL);
+            break;
+
+        case UIPC_CH_ID_AV_AUDIO:
+            uipc_flush_ch_locked(UIPC_CH_ID_AV_AUDIO);
+            break;
+    }
+}
+
+
+static int uipc_close_ch_locked(tUIPC_CH_ID ch_id)
+{
+    int wakeup = 0;
+
+    BTIF_TRACE_EVENT1("CLOSE CHANNEL %d", ch_id);
+
+    if (ch_id >= UIPC_CH_NUM)
+        return -1;
+
+    if (uipc_main.ch[ch_id].srvfd != UIPC_DISCONNECTED)
+    {
+        BTIF_TRACE_EVENT1("CLOSE SERVER (FD %d)", uipc_main.ch[ch_id].srvfd);
+        close(uipc_main.ch[ch_id].srvfd);
+        FD_CLR(uipc_main.ch[ch_id].srvfd, &uipc_main.active_set);
+        uipc_main.ch[ch_id].srvfd = UIPC_DISCONNECTED;
+        wakeup = 1;
+    }
+
+    if (uipc_main.ch[ch_id].fd != UIPC_DISCONNECTED)
+    {
+        BTIF_TRACE_EVENT1("CLOSE CONNECTION (FD %d)", uipc_main.ch[ch_id].fd);
+        close(uipc_main.ch[ch_id].fd);
+        FD_CLR(uipc_main.ch[ch_id].fd, &uipc_main.active_set);
+        uipc_main.ch[ch_id].fd = UIPC_DISCONNECTED;
+        wakeup = 1;
+    }
+
+    /* notify this connection is closed */
+    if (uipc_main.ch[ch_id].cback)
+        uipc_main.ch[ch_id].cback(ch_id, UIPC_CLOSE_EVT);
+
+    /* trigger main thread update if something was updated */
+    if (wakeup)
+        uipc_wakeup_locked();
+
+    return 0;
+}
+
+
+void uipc_close_locked(tUIPC_CH_ID ch_id)
+{
+    if (uipc_main.ch[ch_id].srvfd == UIPC_DISCONNECTED)
+    {
+        BTIF_TRACE_EVENT1("CHANNEL %d ALREADY CLOSED", ch_id);
+        return;
+    }
+
+    /* schedule close on this channel */
+    uipc_main.ch[ch_id].task_evt_flags |= UIPC_TASK_FLAG_DISCONNECT_CHAN;
+    uipc_wakeup_locked();
+}
+
+
+static void uipc_read_task(void *arg)
+{
+    int ch_id;
+    int result;
+
+    prctl(PR_SET_NAME, (unsigned long)"uipc-main", 0, 0, 0);
+
+    while (uipc_main.running)
+    {
+        uipc_main.read_set = uipc_main.active_set;
+
+        result = select(uipc_main.max_fd+1, &uipc_main.read_set, NULL, NULL, NULL);
+
+        if (result == 0)
+        {
+            BTIF_TRACE_EVENT0("select timeout");
+            continue;
+        }
+        else if (result < 0)
+        {
+            BTIF_TRACE_EVENT1("select failed %s", strerror(errno));
+            continue;
+        }
+
+        UIPC_LOCK();
+
+        /* clear any wakeup interrupt */
+        uipc_check_interrupt_locked();
+
+        /* check pending task events */
+        uipc_check_task_flags_locked();
+
+        /* make sure we service audio channel first */
+        uipc_check_fd_locked(UIPC_CH_ID_AV_AUDIO);
+
+        /* check for other connections */
+        for (ch_id = 0; ch_id < UIPC_CH_NUM; ch_id++)
+        {
+            if (ch_id != UIPC_CH_ID_AV_AUDIO)
+                uipc_check_fd_locked(ch_id);
+        }
+
+        UIPC_UNLOCK();
+    }
+
+    BTIF_TRACE_EVENT0("UIPC READ THREAD EXITING");
+
+    uipc_main_cleanup();
+
+    uipc_main.tid = 0;
+
+    BTIF_TRACE_EVENT0("UIPC READ THREAD DONE");
+}
+
+
+int uipc_start_main_server_thread(void)
+{
+    uipc_main.running = 1;
+
+    if (pthread_create(&uipc_main.tid, (const pthread_attr_t *) NULL, (void*)uipc_read_task, NULL) < 0)
+    {
+        BTIF_TRACE_ERROR1("uipc_thread_create pthread_create failed:%d", errno);
+        return -1;
+    }
+
+    return 0;
+}
+
+/* blocking call */
+void uipc_stop_main_server_thread(void)
+{
+    /* request shutdown of read thread */
+    UIPC_LOCK();
+    uipc_main.running = 0;
+    uipc_wakeup_locked();
+    UIPC_UNLOCK();
+
+    /* wait until read thread is fully terminated */
+    if (uipc_main.tid > 0)
+        pthread_join(uipc_main.tid, NULL);
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_Init
+ **
+ ** Description      Initialize UIPC module
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+UDRV_API void UIPC_Init(void *p_data)
+{
+    BTIF_TRACE_DEBUG0("UIPC_Init");
+
+    memset(&uipc_main, 0, sizeof(tUIPC_MAIN));
+
+    uipc_main_init();
+
+    uipc_start_main_server_thread();
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_Open
+ **
+ ** Description      Open UIPC interface
+ **
+ ** Returns          TRUE in case of success, FALSE in case of failure.
+ **
+ *******************************************************************************/
+UDRV_API BOOLEAN UIPC_Open(tUIPC_CH_ID ch_id, tUIPC_RCV_CBACK *p_cback)
+{
+    BTIF_TRACE_DEBUG2("UIPC_Open : ch_id %d, p_cback %x", ch_id, p_cback);
+
+    UIPC_LOCK();
+
+    if (ch_id >= UIPC_CH_NUM)
+    {
+        UIPC_UNLOCK();
+        return FALSE;
+    }
+
+    if (uipc_main.ch[ch_id].srvfd != UIPC_DISCONNECTED)
+    {
+        BTIF_TRACE_EVENT1("CHANNEL %d ALREADY OPEN", ch_id);
+        UIPC_UNLOCK();
+        return 0;
+    }
+
+    switch(ch_id)
+    {
+        case UIPC_CH_ID_AV_CTRL:
+            uipc_setup_server_locked(ch_id, A2DP_CTRL_PATH, p_cback);
+            break;
+
+        case UIPC_CH_ID_AV_AUDIO:
+            uipc_setup_server_locked(ch_id, A2DP_DATA_PATH, p_cback);
+            break;
+    }
+
+    UIPC_UNLOCK();
+
+    return TRUE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_Close
+ **
+ ** Description      Close UIPC interface
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+
+UDRV_API void UIPC_Close(tUIPC_CH_ID ch_id)
+{
+    BTIF_TRACE_DEBUG1("UIPC_Close : ch_id %d", ch_id);
+
+    /* special case handling uipc shutdown */
+    if (ch_id != UIPC_CH_ID_ALL)
+    {
+        UIPC_LOCK();
+        uipc_close_locked(ch_id);
+        UIPC_UNLOCK();
+    }
+    else
+    {
+        BTIF_TRACE_DEBUG0("UIPC_Close : waiting for shutdown to complete");
+        uipc_stop_main_server_thread();
+        BTIF_TRACE_DEBUG0("UIPC_Close : shutdown complete");
+    }
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_SendBuf
+ **
+ ** Description      Called to transmit a message over UIPC.
+ **                  Message buffer will be freed by UIPC_SendBuf.
+ **
+ ** Returns          TRUE in case of success, FALSE in case of failure.
+ **
+ *******************************************************************************/
+UDRV_API BOOLEAN UIPC_SendBuf(tUIPC_CH_ID ch_id, BT_HDR *p_msg)
+{
+    BTIF_TRACE_DEBUG1("UIPC_SendBuf : ch_id %d NOT IMPLEMENTED", ch_id);
+
+    UIPC_LOCK();
+
+    /* currently not used */
+
+    UIPC_UNLOCK();
+
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_Send
+ **
+ ** Description      Called to transmit a message over UIPC.
+ **
+ ** Returns          TRUE in case of success, FALSE in case of failure.
+ **
+ *******************************************************************************/
+UDRV_API BOOLEAN UIPC_Send(tUIPC_CH_ID ch_id, UINT16 msg_evt, UINT8 *p_buf,
+        UINT16 msglen)
+{
+    int n;
+
+    BTIF_TRACE_DEBUG2("UIPC_Send : ch_id:%d %d bytes", ch_id, msglen);
+
+    UIPC_LOCK();
+
+    if (write(uipc_main.ch[ch_id].fd, p_buf, msglen) < 0)
+    {
+        BTIF_TRACE_ERROR1("failed to write (%s)", strerror(errno));
+    }
+
+    UIPC_UNLOCK();
+
+    return FALSE;
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_ReadBuf
+ **
+ ** Description      Called to read a message from UIPC.
+ **
+ ** Returns          void
+ **
+ *******************************************************************************/
+UDRV_API void UIPC_ReadBuf(tUIPC_CH_ID ch_id, BT_HDR *p_msg)
+{
+    BTIF_TRACE_DEBUG1("UIPC_ReadBuf : ch_id:%d NOT IMPLEMENTED", ch_id);
+
+    UIPC_LOCK();
+    UIPC_UNLOCK();
+}
+
+/*******************************************************************************
+ **
+ ** Function         UIPC_Read
+ **
+ ** Description      Called to read a message from UIPC.
+ **
+ ** Returns          return the number of bytes read.
+ **
+ *******************************************************************************/
+
+UDRV_API UINT32 UIPC_Read(tUIPC_CH_ID ch_id, UINT16 *p_msg_evt, UINT8 *p_buf, UINT32 len)
+{
+    int n;
+    int n_read = 0;
+    int fd = uipc_main.ch[ch_id].fd;
+    struct pollfd pfd;
+
+    if (ch_id >= UIPC_CH_NUM)
+    {
+        BTIF_TRACE_ERROR1("UIPC_Read : invalid ch id %d", ch_id);
+        return 0;
+    }
+
+    if (fd == UIPC_DISCONNECTED)
+    {
+        BTIF_TRACE_ERROR1("UIPC_Read : channel %d closed", ch_id);
+        return 0;
+    }
+
+    //BTIF_TRACE_DEBUG4("UIPC_Read : ch_id %d, len %d, fd %d, polltmo %d", ch_id, len,
+    //        fd, uipc_main.ch[ch_id].read_poll_tmo_ms);
+
+    while (n_read < (int)len)
+    {
+        pfd.fd = fd;
+        pfd.events = POLLIN|POLLHUP;
+
+        /* make sure there is data prior to attempting read to avoid blocking
+           a read for more than poll timeout */
+        if (poll(&pfd, 1, uipc_main.ch[ch_id].read_poll_tmo_ms) == 0)
+        {
+            BTIF_TRACE_EVENT1("poll timeout (%d ms)", uipc_main.ch[ch_id].read_poll_tmo_ms);
+            return 0;
+        }
+
+        //BTIF_TRACE_EVENT1("poll revents %x", pfd.revents);
+
+        if (pfd.revents & (POLLHUP|POLLNVAL) )
+        {
+            BTIF_TRACE_EVENT0("poll : channel detached remotely");
+            UIPC_LOCK();
+            uipc_close_locked(ch_id);
+            UIPC_UNLOCK();
+            return 0;
+        }
+
+        n = recv(fd, p_buf, len, 0);
+
+        //BTIF_TRACE_EVENT1("read %d bytes", n);
+
+        if (n == 0)
+        {
+            BTIF_TRACE_EVENT0("UIPC_Read : channel detached remotely");
+            UIPC_LOCK();
+            uipc_close_locked(ch_id);
+            UIPC_UNLOCK();
+            return 0;
+        }
+
+        if (n < 0)
+        {
+            BTIF_TRACE_EVENT1("UIPC_Read : read failed (%s)", strerror(errno));
+            return 0;
+        }
+
+        n_read+=n;
+
+    }
+
+    return n_read;
+}
+
+/*******************************************************************************
+**
+** Function         UIPC_Ioctl
+**
+** Description      Called to control UIPC.
+**
+** Returns          void
+**
+*******************************************************************************/
+
+UDRV_API extern BOOLEAN UIPC_Ioctl(tUIPC_CH_ID ch_id, UINT32 request, void *param)
+{
+    BTIF_TRACE_DEBUG2("#### UIPC_Ioctl : ch_id %d, request %d ####", ch_id, request);
+
+    UIPC_LOCK();
+
+    switch(request)
+    {
+        case UIPC_REQ_RX_FLUSH:
+            uipc_flush_locked(ch_id);
+            break;
+
+        case UIPC_REG_CBACK:
+            //BTIF_TRACE_EVENT3("register callback ch %d srvfd %d, fd %d", ch_id, uipc_main.ch[ch_id].srvfd, uipc_main.ch[ch_id].fd);
+            uipc_main.ch[ch_id].cback = (tUIPC_RCV_CBACK*)param;
+            break;
+
+        case UIPC_REG_REMOVE_ACTIVE_READSET:
+
+            /* user will read data directly and not use select loop */
+            if (uipc_main.ch[ch_id].fd != UIPC_DISCONNECTED)
+            {
+                /* remove this channel from active set */
+                FD_CLR(uipc_main.ch[ch_id].fd, &uipc_main.active_set);
+
+                /* refresh active set */
+                uipc_wakeup_locked();
+            }
+            break;
+
+        case UIPC_SET_READ_POLL_TMO:
+            uipc_main.ch[ch_id].read_poll_tmo_ms = (int)param;
+            BTIF_TRACE_EVENT2("UIPC_SET_READ_POLL_TMO : CH %d, TMO %d ms", ch_id, uipc_main.ch[ch_id].read_poll_tmo_ms );
+            break;
+
+        default:
+            BTIF_TRACE_EVENT1("UIPC_Ioctl : request not handled (%d)", request);
+            break;
+    }
+
+    UIPC_UNLOCK();
+
+    return FALSE;
+}
+
diff --git a/udrv/ulinux/uipc_linux.h b/udrv/ulinux/uipc_linux.h
new file mode 100644
index 0000000..c2ca3fa
--- /dev/null
+++ b/udrv/ulinux/uipc_linux.h
@@ -0,0 +1,42 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2007-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef _UIPC_LINUX_H_
+#define _UIPC_LINUX_H_
+
+typedef int SOCKET;
+#define INVALID_SOCKET  (SOCKET)(-1)
+#define SOCKET_ERROR            (-1)
+
+/* tcp/ip socket configuration */
+typedef struct {
+    char            *p_address;
+    unsigned int    port;
+} tUIPC_LINUX_CFG_TCP ;
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Socket configuration for GLGPS interface */
+extern tUIPC_LINUX_CFG_TCP uipc_linux_cfg_glgps;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* _UIPC_LINUX_H_ */
diff --git a/utils/Android.mk b/utils/Android.mk
new file mode 100644
index 0000000..4e66705
--- /dev/null
+++ b/utils/Android.mk
@@ -0,0 +1,20 @@
+LOCAL_PATH:= $(call my-dir)
+
+include $(CLEAR_VARS)
+
+LOCAL_C_INCLUDES:= $(LOCAL_PATH)/include \
+                   $(LOCAL_PATH)/../gki/ulinux \
+                   $(bdroid_C_INCLUDES)
+
+LOCAL_CFLAGS += -Werror $(bdroid_CFLAGS)
+
+LOCAL_PRELINK_MODULE:=false
+LOCAL_SRC_FILES:= \
+    ./src/bt_utils.c
+
+LOCAL_MODULE := libbt-utils
+LOCAL_MODULE_TAGS := optional
+LOCAL_SHARED_LIBRARIES := libcutils libc
+LOCAL_MODULE_CLASS := SHARED_LIBRARIES
+
+include $(BUILD_SHARED_LIBRARY)
diff --git a/utils/include/bt_utils.h b/utils/include/bt_utils.h
new file mode 100644
index 0000000..ef4fc18
--- /dev/null
+++ b/utils/include/bt_utils.h
@@ -0,0 +1,42 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+#ifndef BT_UTILS_H
+#define BT_UTILS_H
+
+/*******************************************************************************
+**  Type definitions
+********************************************************************************/
+
+typedef enum {
+    TASK_HIGH_MEDIA = 0,
+    TASK_HIGH_GKI_TIMER,
+    TASK_HIGH_BTU,
+    TASK_HIGH_HCI_WORKER,
+    TASK_HIGH_MAX
+} tHIGH_PRIORITY_TASK;
+
+/*******************************************************************************
+**  Functions
+********************************************************************************/
+
+void bt_utils_init();
+void bt_utils_cleanup();
+void raise_priority_a2dp(tHIGH_PRIORITY_TASK high_task);
+
+#endif /* BT_UTILS_H */
diff --git a/utils/src/bt_utils.c b/utils/src/bt_utils.c
new file mode 100644
index 0000000..aeb9292
--- /dev/null
+++ b/utils/src/bt_utils.c
@@ -0,0 +1,139 @@
+/******************************************************************************
+ *
+ *  Copyright (C) 2012 Broadcom Corporation
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License");
+ *  you may not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at:
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS,
+ *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ ******************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      bt_utils.c
+ *
+ *  Description:   Miscellaneous helper functions
+ *
+ *
+ ***********************************************************************************/
+
+#include <cutils/properties.h>
+#include <cutils/sched_policy.h>
+#include <errno.h>
+#include <pthread.h>
+#include <sys/resource.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <utils/ThreadDefs.h>
+
+#define LOG_TAG "BT_UTILS"
+
+#include <utils/Log.h>
+
+#include "data_types.h"
+#include "bt_utils.h"
+
+
+/*******************************************************************************
+**  Type definitions for callback functions
+********************************************************************************/
+static pthread_once_t g_DoSchedulingGroupOnce[TASK_HIGH_MAX];
+static BOOLEAN g_DoSchedulingGroup[TASK_HIGH_MAX];
+static pthread_mutex_t         gIdxLock;
+static int g_TaskIdx;
+
+/*****************************************************************************
+**
+** Function        bt_utils_init
+**
+** Description     Initialize bluedroid util
+**
+** Returns         void
+**
+*******************************************************************************/
+void bt_utils_init() {
+    int i;
+    pthread_mutexattr_t lock_attr;
+
+    for(i = 0; i < TASK_HIGH_MAX; i++) {
+        g_DoSchedulingGroupOnce[i] = PTHREAD_ONCE_INIT;
+        g_DoSchedulingGroup[i] = TRUE;
+    }
+    pthread_mutexattr_init(&lock_attr);
+    pthread_mutex_init(&gIdxLock, &lock_attr);
+}
+
+/*****************************************************************************
+**
+** Function        bt_utils_cleanup
+**
+** Description     Clean up bluedroid util
+**
+** Returns         void
+**
+*******************************************************************************/
+void bt_utils_cleanup() {
+    pthread_mutex_destroy(&gIdxLock);
+}
+
+/*****************************************************************************
+**
+** Function        check_do_scheduling_group
+**
+** Description     check if it is ok to change schedule group
+**
+** Returns         void
+**
+*******************************************************************************/
+static void check_do_scheduling_group(void) {
+    char buf[PROPERTY_VALUE_MAX];
+    int len = property_get("debug.sys.noschedgroups", buf, "");
+    if (len > 0) {
+        int temp;
+        if (sscanf(buf, "%d", &temp) == 1) {
+            g_DoSchedulingGroup[g_TaskIdx] = temp == 0;
+        }
+    }
+}
+
+/*****************************************************************************
+**
+** Function        raise_priority_a2dp
+**
+** Description     Raise task priority for A2DP streaming
+**
+** Returns         void
+**
+*******************************************************************************/
+void raise_priority_a2dp(tHIGH_PRIORITY_TASK high_task) {
+    int rc = 0;
+    int tid = gettid();
+
+    pthread_mutex_lock(&gIdxLock);
+    g_TaskIdx = high_task;
+
+    pthread_once(&g_DoSchedulingGroupOnce[g_TaskIdx], check_do_scheduling_group);
+    if (g_DoSchedulingGroup[g_TaskIdx]) {
+        // set_sched_policy does not support tid == 0
+        rc = set_sched_policy(tid, SP_FOREGROUND);
+    }
+    pthread_mutex_unlock(&gIdxLock);
+
+    if (rc) {
+        ALOGW("failed to change sched policy, tid %d, err: %d", tid, errno);
+    }
+
+    if (setpriority(PRIO_PROCESS, tid, ANDROID_PRIORITY_AUDIO) < 0) {
+        ALOGW("failed to change priority tid: %d to %d", tid, ANDROID_PRIORITY_AUDIO);
+    }
+}
+